OSS4EVA: Using Open-Source Tools to Fulfill Digital Preservation Requirements

Directory of Open Access Journals (Sweden)

Heidi Dowding

2016-10-01

Full Text Available This paper builds on the findings of a workshop held at the 2015 International Conference on Digital Preservation (iPRES, entitled, “Using Open-Source Tools to Fulfill Digital Preservation Requirements” (OSS4PRES hereafter. This day-long workshop brought together participants from across the library and archives community, including practitioners, proprietary vendors, and representatives from open-source projects. The resulting conversations were surprisingly revealing: while OSS’ significance within the preservation landscape was made clear, participants noted that there are a number of roadblocks that discourage or altogether prevent its use in many organizations. Overcoming these challenges will be necessary to further widespread, sustainable OSS adoption within the digital preservation community. This article will mine the rich discussions that took place at OSS4PRES to (1 summarize the workshop’s key themes and major points of debate, (2 provide a comprehensive analysis of the opportunities, gaps, and challenges that using OSS entails at a philosophical, institutional, and individual level, and (3 offer a tangible set of recommendations for future work designed to broaden community engagement and enhance the sustainability of open source initiatives, drawing on both participants’ experience as well as additional research.

BiOSS: A system for biomedical ontology selection.

Science.gov (United States)

Martínez-Romero, Marcos; Vázquez-Naya, José M; Pereira, Javier; Pazos, Alejandro

2014-04-01

In biomedical informatics, ontologies are considered a key technology for annotating, retrieving and sharing the huge volume of publicly available data. Due to the increasing amount, complexity and variety of existing biomedical ontologies, choosing the ones to be used in a semantic annotation problem or to design a specific application is a difficult task. As a consequence, the design of approaches and tools addressed to facilitate the selection of biomedical ontologies is becoming a priority. In this paper we present BiOSS, a novel system for the selection of biomedical ontologies. BiOSS evaluates the adequacy of an ontology to a given domain according to three different criteria: (1) the extent to which the ontology covers the domain; (2) the semantic richness of the ontology in the domain; (3) the popularity of the ontology in the biomedical community. BiOSS has been applied to 5 representative problems of ontology selection. It also has been compared to existing methods and tools. Results are promising and show the usefulness of BiOSS to solve real-world ontology selection problems. BiOSS is openly available both as a web tool and a web service. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Temporal Variability of Observed and Simulated Hyperspectral Earth Reflectance

Science.gov (United States)

Roberts, Yolanda; Pilewskie, Peter; Kindel, Bruce; Feldman, Daniel; Collins, William D.

2012-01-01

The Climate Absolute Radiance and Refractivity Observatory (CLARREO) is a climate observation system designed to study Earth's climate variability with unprecedented absolute radiometric accuracy and SI traceability. Observation System Simulation Experiments (OSSEs) were developed using GCM output and MODTRAN to simulate CLARREO reflectance measurements during the 21st century as a design tool for the CLARREO hyperspectral shortwave imager. With OSSE simulations of hyperspectral reflectance, Feldman et al. [2011a,b] found that shortwave reflectance is able to detect changes in climate variables during the 21st century and improve time-to-detection compared to broadband measurements. The OSSE has been a powerful tool in the design of the CLARREO imager and for understanding the effect of climate change on the spectral variability of reflectance, but it is important to evaluate how well the OSSE simulates the Earth's present-day spectral variability. For this evaluation we have used hyperspectral reflectance measurements from the Scanning Imaging Absorption Spectrometer for Atmospheric Cartography (SCIAMACHY), a shortwave spectrometer that was operational between March 2002 and April 2012. To study the spectral variability of SCIAMACHY-measured and OSSE-simulated reflectance, we used principal component analysis (PCA), a spectral decomposition technique that identifies dominant modes of variability in a multivariate data set. Using quantitative comparisons of the OSSE and SCIAMACHY PCs, we have quantified how well the OSSE captures the spectral variability of Earth?s climate system at the beginning of the 21st century relative to SCIAMACHY measurements. These results showed that the OSSE and SCIAMACHY data sets share over 99% of their total variance in 2004. Using the PCs and the temporally distributed reflectance spectra projected onto the PCs (PC scores), we can study the temporal variability of the observed and simulated reflectance spectra. Multivariate time

Bio-Oss® modified by calcitonin gene-related peptide promotes osteogenesis in vitro.

Science.gov (United States)

Li, Yuanjing; Yang, Lan; Zheng, Zhichao; Li, Zhengmao; Deng, Tian; Ren, Wen; Wu, Caijuan; Guo, Lvhua

2017-11-01

Bio-Oss ® and α-calcitonin gene-related peptide (CGRP) are involved in osteogenesis. However, it has remained to be assessed how α-CGRP affects the effect of Bio-Oss. In the present study, primary osteoblasts were incubated with α-CGRP, Bio-Oss, α-GGRP-Bio-Oss or mimic-α-CGRP. The proliferation rate, mineralization nodules, alkaline phosphatase (ALP) activity and the expression of osteogenic genes were measured by a Cell Counting Kit-8 assay, Alizarin Red-S staining, ALP activity detection and reverse-transcription quantitative PCR as well as western blot analysis, respectively. The proliferation rate, ALP activity and the number of mineralization nodules were significantly increased in the α-CGRP-modified Bio-Oss group compared to that in the Bio-Oss group. The mRNA and protein levels of osteocalcin, Runt-related transcription factor-2 and ALP were significantly upregulated in the α-CGRP-Bio-Oss group compared with those in the Bio-Oss group. Furthermore, the effect of mimic-α-CGRP on osteogenesis was reduced as it carried a mutation. In conclusion, the present study was the first to demonstrate that Bio-Oss modified with CGRP contributed to osteogenesis and may provide a novel formulation applied in the clinic for restoration of large bone defects.

Ocean OSSEs: recent developments and future challenges

Science.gov (United States)

Kourafalou, V. H.

2012-12-01

Atmospheric OSSEs have had a much longer history of applications than OSSEs (and OSEs) in oceanography. Long standing challenges include the presence of coastlines and steep bathymetric changes, which require the superposition of a wide variety of space and time scales, leading to difficulties on ocean observation and prediction. For instance, remote sensing is critical for providing a quasi-synoptic oceanographic view, but the coverage is limited at the ocean surface. Conversely, in situ measurements are capable to monitor the entire water column, but at a single location and usually for a specific, short time. Despite these challenges, substantial progress has been made in recent years and international initiatives have provided successful OSSE/OSE examples and formed appropriate forums that helped define the future roadmap. These will be discussed, together with various challenges that require a community effort. Examples include: integrated (remote and in situ) observing system requirements for monitoring large scale and climatic changes, vs. short term variability that is particularly important on the regional and coastal spatial scales; satisfying the needs of both global and regional/coastal nature runs, from development to rigorous evaluation and under a clear definition of metrics; data assimilation in the presence of tides; estimation of real-time river discharges for Earth system modeling. An overview of oceanographic efforts that complement the standard OSSE methodology will also be given. These include ocean array design methods, such as representer-based analysis and adaptive sampling. Exciting new opportunities for both global and regional ocean OSSE/OSE studies have recently become possible with targeted periods of comprehensive data sets, such as the existing Gulf of Mexico observations from multiple sources in the aftermath of the DeepWater Horizon incident and the upcoming airborne AirSWOT, in preparation for the SWOT (Surface Water and Ocean

Political Economy, the Internet and FL/OSS Development

Science.gov (United States)

Mansell, Robin; Berdou, Evangelia

Despite the growing amount of research on Free/Libre/Open Source Software (FL/OSS) development, there is little insight into how structural factors associated with institutions influence the patterns of software developer activity in this area. This article examines some of the dynamics of the development of this type of software and the extent to which these dynamics are associated with features of the gift economy as is frequently suggested in the literature. Drawing on an empirical analysis of contributors to the GNOME FL/OSS project, we suggest that greater attention should be given to the emergence of a mixed economy in which features of the exchange economy come to the fore with implications for the power relationships among those contributing to FL/OSS.

Plasma diagnostics package. Volume 1: OSS-1 section

Science.gov (United States)

Pickett, Jolene S. (Compiler); Frank, L. A. (Compiler); Kurth, W. S. (Compiler)

1988-01-01

This volume (1) of the Plasma Diagnostics Package (PDP) final science report contains a summary of all of the data reduction and scientific analyses which were performed using PDP data obtained on STS-3 as a part of the Office of Space Science first payload (OSS-1). This work was performed during the period of launch, March 22, l982, through June 30, l983. During this period the primary data reduction effort consisted of processing summary plots of the data received by the 14 instruments located on the PDP and submitting these data to the National Space Science Data Center (NSSDC). The scientific analyses during the performance period consisted of general studies which incorporated the results of several of the PDP's instruments, detailed studies which concentrated on data from only one or two of the instruments, and joint studies of beam-plasma interactions with the OSS-1 Fast Pulse Electron Generator (FPEG) of the Vehicle Charging and Potential Investigation (VCAP). Internal reports, published papers and oral presentations which involve PDP/OSS-1 data are listed in Sections 3 and 4. A PDP/OSS-1 scientific results meeting was held at the University of Iowa on April 19-20, 1983. This meeting was attended by most of the PDP and VCAP investigators and provided a forum for discussing and comparing the various results, particularly with regard to the shuttle orbiter environment. One of the most important functional objectives of the PDP on OSS-1 was to characterize the orbiter environment.

Tropical Cyclones in the 7km NASA Global Nature Run for use in Observing System Simulation Experiments

Science.gov (United States)

Reale, Oreste; Achuthavarier, Deepthi; Fuentes, Marangelly; Putman, William M.; Partyka, Gary

2018-01-01

The National Aeronautics and Space Administration (NASA) Nature Run (NR), released for use in Observing System Simulation Experiments (OSSEs), is a 2-year long global non-hydrostatic free-running simulation at a horizontal resolution of 7 km, forced by observed sea-surface temperatures (SSTs) and sea ice, and inclusive of interactive aerosols and trace gases. This article evaluates the NR with respect to tropical cyclone (TC) activity. It is emphasized that to serve as a NR, a long-term simulation must be able to produce realistic TCs, which arise out of realistic large-scale forcings. The presence in the NR of the realistic, relevant dynamical features over the African Monsoon region and the tropical Atlantic is confirmed, along with realistic African Easterly Wave activity. The NR Atlantic TC seasons, produced with 2005 and 2006 SSTs, show interannual variability consistent with observations, with much stronger activity in 2005. An investigation of TC activity over all the other basins (eastern and western North Pacific, North and South Indian Ocean, and Australian region), together with relevant elements of the atmospheric circulation, such as, for example, the Somali Jet and westerly bursts, reveals that the model captures the fundamental aspects of TC seasons in every basin, producing realistic number of TCs with realistic tracks, life spans and structures. This confirms that the NASA NR is a very suitable tool for OSSEs targeting TCs and represents an improvement with respect to previous long simulations that have served the global atmospheric OSSE community. PMID:29674806

A comparative study of the regenerative effect of sinus bone grafting with platelet-rich fibrin-mixed Bio-Oss® and commercial fibrin-mixed Bio-Oss®: an experimental study.

Science.gov (United States)

Xuan, Feng; Lee, Chun-Ui; Son, Jeong-Seog; Jeong, Seung-Mi; Choi, Byung-Ho

2014-06-01

Anorganic bovine bone (Bio-Oss®) particles are one of the most popular grafting materials. The particles are often mixed with platelet-rich fibrin (PRF) or a commercial fibrin (Tisseel®) to form a mouldable graft material. The objective of this study was to compare the potentials of PRF-mixed Bio-Oss® and Tisseel®-mixed Bio-Oss® to enhance bone regeneration in a canine sinus model. Six mongrel dogs were used in this study. After elevating the sinus membrane in both maxillary sinus cavities, an implant was placed into the sinus cavity. In one of the sinus cavities, the PRF/Bio-Oss® composite was grafted, and the Tisseel®/Bio-Oss® composite was grafted in the other sinus cavity. After a 6 month healing period, bone formation in the graft sites and bone-implant contact were evaluated. The mean osseointegration rate was 43.5 ± 12.4% and new bone formation rate 41.8 ± 5.9% in the PRF/Bio-Oss® composite sites. In the Tisseel®/Bio-Oss® composite sites they were 30.7 ± 7.9% and 31.3 ± 6.4%. There were statistically significant differences between the groups. The findings from this study suggest that when platelet-rich fibrin is used as an adjunct to Bio-Oss® particles for bone augmentation in the maxillary sinus, bone formation in the graft sites is significantly greater than when Tisseel® is used. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

De criminaliteit van Oss

NARCIS (Netherlands)

Nagel, Willem Hendrik

1949-01-01

Oss is a municipality in the Dutch province of North-Brabant, to be exact, in the Eastern part of it which used to be the Majory of Bois le Duc. It was the capital of one of the four quarters of this Majory, viz. of the quarter of Maasland. Situated in that part of the Brabantine atea which adjoined

1994 report on Task 4.3.1 investigate how training should be planned to ensure efficient utilisation or OSS. Task 4.3.2 evaluate how the introduction of OSS influences requirements to the basic education of the operator

International Nuclear Information System (INIS)

1995-01-01

According to the experience coming from countries where new concepts of nuclear power plants control rooms equipped with integrated system of OSSs have recently been largely tested in experimental centres equipped with powerful real-time plant simulators (e.g. NORWAY - Halden project; Japan) a training in use of the OSS is important, so that the operator can use it in the right situation and in right manner. Experiments, in which mostly experienced active control room operators from operating NPPs took part showed as well, that both the requirements for additional basic education of operators and the planning of training is influenced by a number of different factors like complexity of system structure and interface, system function, capabilities of training centres, operators background, experience and age and others. 6 refs

Who contributes voluntarily to OSS? An investigation among German IT employees

DEFF Research Database (Denmark)

Bitzer, Jürgen; Geishecker, Ingo

2010-01-01

Based on newly assembled survey data, we analyze which individual characteristics of IT employees are associated with the willingness to participate voluntarily in Open Source Software (OSS) projects. We find that, contrary to common expectations, formal educational attainment is not positively...... voluntary OSS contributions during leisure time. Although one has to be cautious regarding the direction of causality, we interpret this as evidence of career-oriented motives in voluntary OSS contributors. The finding is also reinforced by our more specific analysis of the importance of such motives...

[Registries for rare diseases : OSSE - An open-source framework for technical implementation].

Science.gov (United States)

Storf, Holger; Schaaf, Jannik; Kadioglu, Dennis; Göbel, Jens; Wagner, Thomas O F; Ückert, Frank

2017-05-01

Meager amounts of data stored locally, a small number of experts, and a broad spectrum of technological solutions incompatible with each other characterize the landscape of registries for rare diseases in Germany. Hence, the free software Open Source Registry for Rare Diseases (OSSE) was created to unify and streamline the process of establishing specific rare disease patient registries. The data to be collected is specified based on metadata descriptions within the registry framework's so-called metadata repository (MDR), which was developed according to the ISO/IEC 11179 standard. The use of a central MDR allows for sharing the same data elements across any number of registries, thus providing a technical prerequisite for making data comparable and mergeable between registries and promoting interoperability.With OSSE, the foundation is laid to operate linked patient registries while respecting strong data protection regulations. Using the federated search feature, data for clinical studies can be identified across registries. Data integrity, however, remains intact since no actual data leaves the premises without the owner's consent. Additionally, registry solutions other than OSSE can participate via the OSSE bridgehead, which acts as a translator between OSSE registry networks and non-OSSE registries. The pseudonymization service Mainzelliste adds further data protection.Currently, more than 10 installations are under construction in clinical environments (including university hospitals in Frankfurt, Hamburg, Freiburg and Münster). The feedback given by the users will influence further development of OSSE. As an example, the installation process of the registry for undiagnosed patients at University Hospital Frankfurt is described in more detail.

The OSS Model and the Future of the SOF Warrior

Science.gov (United States)

2011-11-01

historians served as academic advisors to the project: Dr. Nancy W. Collins, Columbia University; Dr. Troy Sacquety, USASOC historian; and Mr. Rob Townley ...December 2010. 23 Rob Townley , Conversation with OSS historian and descendant of OSS veteran, November 2010. 24 Careers, CIA, available at https...Operations Group (OG) officers. 32 29 Rob Townley , 2010. 30 Although this quote is commonly

CLINICO-MORPHOLOGICAL RESEARCH OF BIO-OSS ® DURING BONE-PLASTIC OPERATIONS

Directory of Open Access Journals (Sweden)

Pavel SIDELNIKOV

2016-03-01

Full Text Available Aim: To study the clinical and morphological characteristics of Bio-Oss ® and Bio-Gate ® materials during bone-plastic operations, especially bone regeneration after surgical interventiond. Materials and method: The pathomorphological study was performed with the intravital biopsy material of bone tissue from augmentation areas, obtained during implants placement. Clinical studies included subjective and objective methods, in particular X-ray analysis and photo documenting. Bio-Oss ®, Bio-Gide ®, Bio-Gide ® Perio membranes, Resor-Pin pins, U-impl implant systems were investigated and 231 operations were performed with Bio-Oss ® and Bio-Gate ®, of which 38 cases of sinus lifting, 145 of bone plasty with simultaneous implantation and 48 cases of periodontal surgery. Results: Usage of bone-plastic Bio-OSS ® and Bio-Gate ® materials during various bone-plastic and periodontal operations assures a high clinical effect (from 93 to 99%. Morphologically, it has been observed that, after usage of bone Bio-OSS ® and Bio-Gate ® materials, a new osteoid tissue was formed, similar to the bone tissue of the alveolar process, with high mineralization levels, especially in the first 2 years, due to the simultaneous resorption of the material. The newly-formed tissue has a classical design and can fully perform the functions of jaw bones, especially for carrying loads transmitted with either teeth or implants.

[Bio-Oss collagen bone grafting in the treatment of endodontic-periodontic lesion].

Science.gov (United States)

Sun, Jiang; Liu, Qiong

2009-09-01

To study the effect of Bio-Oss collagen for bone grafting in the treatment of endodontic-periodontic lesion. Thirty patients (37 teeth) with endodontic-periodontic lesions received root canal therapy and periodontal treatment. Four weeks after the treatment, Bio-Oss collagen was grafted in these teeth. Clinical examinations were performed 1, 3, 6, 9, and 12 months after the surgery. The mobility of these teeth improved 1 month after the surgery. At 3, 6, 9, and 12 months after the surgery, the pocket depth reduced obviously good attachment and further improvement of the tooth mobility. Bio-Oss collagen for bone grafting can achieve good therapeutic effect for endodontic-periodontic lesions.

Cross-cultural adaptation and validation of the Portuguese version of the Oxford Shoulder Score (OSS).

Science.gov (United States)

Gonçalves, Rui Soles; Caldeira, Carolina Quintal; Rodrigues, Mónica Vieira; Felícia, Sabine Cardoso; Cavalheiro, Luís Manuel; Ferreira, Pedro Lopes

2018-03-08

To translate and culturally adapt the Oxford Shoulder Score (OSS) to the European Portuguese language, and to test its reliability (internal consistency, reproducibility and measurement error) and validity (construct validity). The OSS Portuguese version was obtained through translations, back-translations, consensus panels, clinical review and cognitive pre-test. Portuguese OSS, Disabilities of the Arm, Shoulder and Hand (DASH) questionnaires, and the visual analogue scales of pain at rest [VAS rest] and during movement [VAS movement] were applied to 111 subjects with shoulder pain (degenerative or inflammatory disorders) and recommended for physical therapy. A clinical and sociodemographic questionnaire was also applied. The reliability was good, with a Cronbach's alpha coefficient of 0.90, an intraclass correlation coefficient (ICC) of 0.92, a standard error of measurement (SEM) of 2.59 points and a smallest detectable change (SDC) of 7.18 points. Construct validity was supported by the confirmation of three initial hypotheses involving expected significant correlation between OSS and other measures (DASH, VAS rest and VAS movement) and between OSS and the number of days of work absenteeism. The Portuguese OSS version presented suitable psychometric properties, in terms of reliability (internal consistency, reproducibility and measurement error) and validity (construct validity).

Multiplatform Mission Planning and Operations Simulation Environment for Adaptive Remote Sensors

Science.gov (United States)

Smith, G.; Ball, C.; O'Brien, A.; Johnson, J. T.

2017-12-01

We report on the design and development of mission simulator libraries to support the emerging field of adaptive remote sensors. We will outline the current state of the art in adaptive sensing, provide analysis of how the current approach to performing observing system simulation experiments (OSSEs) must be changed to enable adaptive sensors for remote sensing, and present an architecture to enable their inclusion in future OSSEs.The growing potential of sensors capable of real-time adaptation of their operational parameters calls for a new class of mission planning and simulation tools. Existing simulation tools used in OSSEs assume a fixed set of sensor parameters in terms of observation geometry, frequencies used, resolution, or observation time, which allows simplifications to be made in the simulation and allows sensor observation errors to be characterized a priori. Adaptive sensors may vary these parameters depending on the details of the scene observed, so that sensor performance is not simple to model without conducting OSSE simulations that include sensor adaptation in response to varying observational environment. Adaptive sensors are of significance to resource-constrained, small satellite platforms because they enable the management of power and data volumes while providing methods for multiple sensors to collaborate.The new class of OSSEs required to utilize adaptive sensors located on multiple platforms must answer the question: If the physical act of sensing has a cost, how does the system determine if the science value of a measurement is worth the cost and how should that cost be shared among the collaborating sensors?Here we propose to answer this question using an architecture structured around three modules: ADAPT, MANAGE and COLLABORATE. The ADAPT module is a set of routines to facilitate modeling of adaptive sensors, the MANAGE module will implement a set of routines to facilitate simulations of sensor resource management when power and data

Geostationary Coastal and Air Pollution Events (GEO-CAPE) Sensitivity Analysis Experiment

Science.gov (United States)

Lee, Meemong; Bowman, Kevin

2014-01-01

Geostationary Coastal and Air pollution Events (GEO-CAPE) is a NASA decadal survey mission to be designed to provide surface reflectance at high spectral, spatial, and temporal resolutions from a geostationary orbit necessary for studying regional-scale air quality issues and their impact on global atmospheric composition processes. GEO-CAPE's Atmospheric Science Questions explore the influence of both gases and particles on air quality, atmospheric composition, and climate. The objective of the GEO-CAPE Observing System Simulation Experiment (OSSE) is to analyze the sensitivity of ozone to the global and regional NOx emissions and improve the science impact of GEO-CAPE with respect to the global air quality. The GEO-CAPE OSSE team at Jet propulsion Laboratory has developed a comprehensive OSSE framework that can perform adjoint-sensitivity analysis for a wide range of observation scenarios and measurement qualities. This report discusses the OSSE framework and presents the sensitivity analysis results obtained from the GEO-CAPE OSSE framework for seven observation scenarios and three instrument systems.

Maxillary sinus floor augmentation with Bio-Oss or Bio-Oss mixed with autogenous bone as graft: a systematic review

DEFF Research Database (Denmark)

Jensen, Thomas; Schou, Søren; Stavropoulos, Andreas

2012-01-01

Aims: The objective of the present systematic review was to test the hypothesis of no differences in the implant treatment outcome when Bio-Oss or Bio-Oss mixed with autogenous bone is used as graft for the maxillary sinus floor augmentation (MSFA) applying the lateral window technique. Material...... and methods: A MEDLINE (PubMed) search in combination with a hand search of relevant journals was conducted by including human studies published in English from January 1, 1990 to June 1, 2010. The search provided 879 titles and 35 studies fulfilled the inclusion criteria. Considerable variation...... in the included studies prevented meta-analysis from being performed and no long-term study comparing MSFA with the two treatment modalities was identified. Also, the survival of suprastructures after the two augmentation procedures was not compared within the same study. Results: The 1-year implant survival...

Reliability Analysis and Optimal Release Problem Considering Maintenance Time of Software Components for an Embedded OSS Porting Phase

Science.gov (United States)

Tamura, Yoshinobu; Yamada, Shigeru

OSS (open source software) systems which serve as key components of critical infrastructures in our social life are still ever-expanding now. Especially, embedded OSS systems have been gaining a lot of attention in the embedded system area, i.e., Android, BusyBox, TRON, etc. However, the poor handling of quality problem and customer support prohibit the progress of embedded OSS. Also, it is difficult for developers to assess the reliability and portability of embedded OSS on a single-board computer. In this paper, we propose a method of software reliability assessment based on flexible hazard rates for the embedded OSS. Also, we analyze actual data of software failure-occurrence time-intervals to show numerical examples of software reliability assessment for the embedded OSS. Moreover, we compare the proposed hazard rate model for the embedded OSS with the typical conventional hazard rate models by using the comparison criteria of goodness-of-fit. Furthermore, we discuss the optimal software release problem for the porting-phase based on the total expected software maintenance cost.

The protective effect of platelet released growth factors and bone augmentation (Bio-Oss®) on ethanol impaired osteoblasts.

Science.gov (United States)

Sönmez, Tolga Taha; Bayer, Andreas; Cremer, Tillman; Hock, Jennifer Vanessa Phi; Lethaus, Bernd; Kweider, Nisreen; Wruck, Christoph Jan; Drescher, Wolf; Jahr, Holger; Lippross, Sebastian; Pufe, Thomas; Tohidnezhad, Mersedeh

2017-11-01

Chronic alcohol consumption is a known limiting factor for bone healing. One promising strategy to improve bone augmentation techniques with Bio-Oss ® in oral and maxillofacial surgery might be the supportive application of platelet-concentrated biomaterials as platelet-released growth factor (PRGF). To address this matter, we performed an in vitro study investigating the protective effects of PRGF and Bio-Oss ® in ethanol (EtOH) treated osteoblasts. The SAOS-2 osteosarcoma cell line, with and without EtOH pretreatment was used. The cell viability, proliferation and alkali phosphatase activity (ALP) after application of 0%, 5% and 10% PRGF and Bio-Oss ® were assessed. The application of PRGF and Bio-Oss ® in EtOH impaired osteoblasts showed a significant beneficial influence increasing the viability of the osteoblasts in cell culture. The synergistic effect of Bio-Oss ® and 5% PRGF on the proliferation of osteoblasts was also demonstrated. Bio-Oss ® only in combination with PRGF increases the alkaline phosphatase (ALP) activity in EtOH pretreated cells. These results indicate that the simultaneous application of PRGF and Bio-Oss ® inhibits EtOH induced bone healing impairment. Furthermore, in the cells, PRGF induced a protective mechanism which might promote bone regeneration. Copyright © 2017 Elsevier GmbH. All rights reserved.

phytoplankton diversity indices of Osse River, Edo State, Nigeria

African Journals Online (AJOL)

USER

The phytoplankton diversity indices of Osse River, Edo State, Nigeria, were investigated monthly from January ... In terms of abundance, Bacillariophyceae had the highest distribution of phytoplankton (79.00%), ...... erosion beach in Lagos.

Quantitative Comparison of the Variability in Observed and Simulated Shortwave Reflectance

Science.gov (United States)

Roberts, Yolanda, L.; Pilewskie, P.; Kindel, B. C.; Feldman, D. R.; Collins, W. D.

2013-01-01

The Climate Absolute Radiance and Refractivity Observatory (CLARREO) is a climate observation system that has been designed to monitor the Earth's climate with unprecedented absolute radiometric accuracy and SI traceability. Climate Observation System Simulation Experiments (OSSEs) have been generated to simulate CLARREO hyperspectral shortwave imager measurements to help define the measurement characteristics needed for CLARREO to achieve its objectives. To evaluate how well the OSSE-simulated reflectance spectra reproduce the Earth s climate variability at the beginning of the 21st century, we compared the variability of the OSSE reflectance spectra to that of the reflectance spectra measured by the Scanning Imaging Absorption Spectrometer for Atmospheric Cartography (SCIAMACHY). Principal component analysis (PCA) is a multivariate decomposition technique used to represent and study the variability of hyperspectral radiation measurements. Using PCA, between 99.7%and 99.9%of the total variance the OSSE and SCIAMACHY data sets can be explained by subspaces defined by six principal components (PCs). To quantify how much information is shared between the simulated and observed data sets, we spectrally decomposed the intersection of the two data set subspaces. The results from four cases in 2004 showed that the two data sets share eight (January and October) and seven (April and July) dimensions, which correspond to about 99.9% of the total SCIAMACHY variance for each month. The spectral nature of these shared spaces, understood by examining the transformed eigenvectors calculated from the subspace intersections, exhibit similar physical characteristics to the original PCs calculated from each data set, such as water vapor absorption, vegetation reflectance, and cloud reflectance.

Quantifying the impact of OSS adoption risks with the help of i* Models

OpenAIRE

Costal Costa, Dolors; Gross, Daniel; López Cuesta, Lidia; Morandini, Mirko; Siena, Alberto; Susi, Angelo

2014-01-01

Adopting Open Source Software (OSS) components in organisational settings requires evaluating the possible impact of adoption decisions on business goals. Measures available in OSS, capturing indicators such as the quality of open source code and the activeness of the developing community, can be used as a driver to assess various risks in component adoption. In this paper we illustrate how risk and impact models are used to relate measures obtained from the component under analysis to busine...

The growth of an OSS community

DEFF Research Database (Denmark)

Vujovic, Sladjana

are generated: (i) weakness in integration of activities and tasks (leading to leadership crisis), (ii) inadequacies in communication among community contributors and subgroups (leading to coordination crisis), and (iii) tension between autonomous contributors and formal authority (leading to authority crisis......Departing from an inductive, grounded theory-based field study in an OSS community called TYPO3, this paper investigates how community growth is addressed. It adopts an organizational life cycle perspective and focuses on intraorganizational conditions. Three major types of consequences of growth...

The Meso-level Structure of F/OSS Collaboration Network

DEFF Research Database (Denmark)

Conald, Guido; Rullani, Francesco

2010-01-01

Social networks in Free/Open Source Software (F/OSS) have been usually analyzed at the level of the single project e.g., [6], or at the level of a whole ecology of projects, e.g., [33]. In this paper, we also investigate the social network generated by developers who collaborate to one or multiple...... F/OSS projects, but we focus on the less-studied meso-level structure emerging when applying to this network a community-detection technique. The network of ‘communities’ emerging from this analysis links sub-groups of densely connected developers, sub-groups that are smaller than the components...... of the network but larger than the teams working on single projects. Our results reveal the complexity of this meso-level structure, where several dense sub-groups of developers are connected by sparse collaboration among different sub-groups. We discuss the theoretical implications of our findings...

BIM Open Source Software (OSS for the documentation of cultural heritage

Directory of Open Access Journals (Sweden)

Sotiris Logothetis

2016-11-01

This paper presents a review of some recent research on the topic. We review the recent developments focusing on the OSS that can be used at various stages of BIM process in the digital documentation of cultural heritage. The results show that there is more preference in the commercial software due to the fact that the OSS is not yet complete and covers all stages of the BIM process. However, lately we have the Edificius in architectural BIM design and “BIM Vision” as Industry Foundation Classes (IFC model viewer that try to attract as many users as possible. These tools are free and they could well be used for the digital reconstruction of cultural heritage.

Application of Open Source Software (OSS) in library operations ...

African Journals Online (AJOL)

The paper discussed the features, strength and weaknesses of CDS/ ISIS, KOHA, Greenstone and NewGenlib as the four types of OSS which were considered among the best that can handle content and bibliographic data management and are commonly applied in Nigeria especially among institutions of higher learning.

Understanding the causes of architecture changes using OSS mailing lists

NARCIS (Netherlands)

Ding, Wei; Liang, Peng; Tang, Anthony; Van Vliet, Hans

2015-01-01

The causes of architecture changes can tell about why architecture changes, and this knowledge can be captured to prevent architecture knowledge vaporization and architecture degeneration. But the causes are not always known, especially in open source software (OSS) development. This makes it very

A Stigmergy Approach for Open Source Software Developer Community Simulation

Energy Technology Data Exchange (ETDEWEB)

Cui, Xiaohui [ORNL; Beaver, Justin M [ORNL; Potok, Thomas E [ORNL; Pullum, Laura L [ORNL; Treadwell, Jim N [ORNL

2009-01-01

The stigmergy collaboration approach provides a hypothesized explanation about how online groups work together. In this research, we presented a stigmergy approach for building an agent based open source software (OSS) developer community collaboration simulation. We used group of actors who collaborate on OSS projects as our frame of reference and investigated how the choices actors make in contribution their work on the projects determinate the global status of the whole OSS projects. In our simulation, the forum posts and project codes served as the digital pheromone and the modified Pierre-Paul Grasse pheromone model is used for computing developer agent behaviors selection probability.

Retrieved Products from Simulated Hyperspectral Observations of a Hurricane

Science.gov (United States)

Susskind, Joel; Kouvaris, Louis; Iredell, Lena; Blaisdell, John

2015-01-01

Demonstrate via Observing System Simulation Experiments (OSSEs) the potential utility of flying high spatial resolution AIRS class IR sounders on future LEO and GEO missions.The study simulates and analyzes radiances for 3 sounders with AIRS spectral and radiometric properties on different orbits with different spatial resolutions: 1) Control run 13 kilometers AIRS spatial resolution at nadir on LEO in Aqua orbit; 2) 2 kilometer spatial resolution LEO sounder at nadir ARIES; 3) 5 kilometers spatial resolution sounder on a GEO orbit, radiances simulated every 72 minutes.

Dental Stem Cell Migration on Pulp Ceiling Cavities Filled with MTA, Dentin Chips, or Bio-Oss

Directory of Open Access Journals (Sweden)

Stefania Lymperi

2015-01-01

Full Text Available MTA, Bio-Oss, and dentin chips have been successfully used in endodontics. The aim of this study was to assess the adhesion and migration of dental stem cells on human pulp ceiling cavities filled with these endodontic materials in an experimental model, which mimics the clinical conditions of regenerative endodontics. Cavities were formed, by a homemade mold, on untouched third molars, filled with endodontic materials, and observed with electron microscopy. Cells were seeded on cavities’ surface and their morphology and number were analysed. The phenomenon of tropism was assessed in a migration assay. All three materials demonstrated appropriate microstructures for cell attachment. Cells grew on all reagents, but they showed a differential morphology. Moreover, variations were observed when comparing cells numbers on cavity’s filling versus the surrounding dentine disc. The highest number of cells was recorded on dentin chips whereas the opposite was true for Bio-Oss. This was confirmed in the migration assay where a statistically significant lower number of cells migrated towards Bio-Oss as compared to MTA and dentin chips. This study highlights that MTA and dentin chips have a greater potential compared to Bio-Oss regarding the attraction of dental stem cells and are good candidates for bioengineered pulp regeneration.

Fundamentals of EMS, NMS and OSS/BSS

CERN Document Server

Sathyan, Jithesh

2011-01-01

In this era where data and voice services are available at a push of a button, service providers have virtually limitless options for reaching their customers with value-added services. The changes in services and underlying networks that this always-on culture creates make it essential for service providers to understand the evolving business logic and appropriate support systems for service delivery, billing, and revenue assurance. Supplying an end-to-end understanding of telecom management layers, Fundamentals of EMS, NMS and OSS/BSS is a complete guide to telecom resource and service manag

Organizational strategy use in children aged 5-7: standardization and validity of the Rey Complex Figure Organizational Strategy Score (RCF-OSS).

Science.gov (United States)

Martens, R; Hurks, P P M; Jolles, J

2014-01-01

This study investigated psychometric properties (standardization and validity) of the Rey Complex Figure Organizational Strategy Score (RCF-OSS) in a sample of 217 healthy children aged 5-7 years. Our results showed that RCF-OSS performance changes significantly between 5 and 7 years of age. While most 5-year-olds used a local approach when copying the Rey-Osterrieth Complex Figure (ROCF), 7-year-olds increasingly adopted a global approach. RCF-OSS performance correlated significantly, but moderately with measures of ROCF accuracy, executive functioning (fluency, working memory, reasoning), and non-executive functioning (visual-motor integration, visual attention, processing speed, numeracy). These findings seem to indicate that RCF-OSS performance reflects a range of cognitive skills at 5 to 7 years of age, including aspects of executive and non-executive functioning.

An OSSE Study for Deep Argo Array using the GFDL Ensemble Coupled Data Assimilation System

Science.gov (United States)

Chang, You-Soon; Zhang, Shaoqing; Rosati, Anthony; Vecchi, Gabriel A.; Yang, Xiaosong

2018-03-01

An observing system simulation experiment (OSSE) using an ensemble coupled data assimilation system was designed to investigate the impact of deep ocean Argo profile assimilation in a biased numerical climate system. Based on the modern Argo observational array and an artificial extension to full depth, "observations" drawn from one coupled general circulation model (CM2.0) were assimilated into another model (CM2.1). Our results showed that coupled data assimilation with simultaneous atmospheric and oceanic constraints plays a significant role in preventing deep ocean drift. However, the extension of the Argo array to full depth did not significantly improve the quality of the oceanic climate estimation within the bias magnitude in the twin experiment. Even in the "identical" twin experiment for the deep Argo array from the same model (CM2.1) with the assimilation model, no significant changes were shown in the deep ocean, such as in the Atlantic meridional overturning circulation and the Antarctic bottom water cell. The small ensemble spread and corresponding weak constraints by the deep Argo profiles with medium spatial and temporal resolution may explain why the deep Argo profiles did not improve the deep ocean features in the assimilation system. Additional studies using different assimilation methods with improved spatial and temporal resolution of the deep Argo array are necessary in order to more thoroughly understand the impact of the deep Argo array on the assimilation system.

l-cysteine desulfhydrase-related H2 S production is involved in OsSE5-promoted ammonium tolerance in roots of Oryza sativa.

Science.gov (United States)

Guo, Hongming; Zhou, Heng; Zhang, Jing; Guan, Wenxue; Xu, Sheng; Shen, Wenbiao; Xu, Guohua; Xie, Yanjie; Foyer, Christine Helen

2017-09-01

Previous studies revealed that rice heme oxygenase PHOTOPERIOD SENSITIVITY 5 (OsSE5) is involved in the regulation of tolerance to excess ammonium by enhancing antioxidant defence. In this study, the relationship between OsSE5 and hydrogen sulfide (H 2 S), a well-known signalling molecule, was investigated. Results showed that NH 4 Cl triggered the induction of l-cysteine desulfhydrase (l-DES)-related H 2 S production in rice seedling roots. A H 2 S donor not only alleviated the excess ammonium-triggered inhibition of root growth but also reduced endogenous ammonium, both of which were aggravated by hypotaurine (HT, a H 2 S scavenger) or dl-propargylglycine (PAG, a l-DES inhibitor). Nitrogen metabolism-related enzymes were activated by H 2 S, thus resulting in the induction of amino acid synthesis and total nitrogen content. Interestingly, the activity of l-DES, as well as the enzymes involved in nitrogen metabolism, was significantly increased in the OsSE5-overexpression line (35S:OsSE5), whereas it impaired in the OsSE5-knockdown mutant (OsSE5-RNAi). The application of the HT/PAG or H 2 S donor could differentially block or rescue NH 4 Cl-hyposensitivity or hypersensitivity phenotypes in 35S:OsSE5-1 or OsSE5-RNAi-1 plants, with a concomitant modulation of nitrogen assimilation. Taken together, these results illustrated that H 2 S function as an indispensable positive regulator participated in OsSE5-promoted ammonium tolerance, in which nitrogen metabolism was facilitated. © 2017 John Wiley & Sons Ltd.

Two uncommon uses of Bio-Oss for GTR and ridge augmentation following extractions: two case reports.

Science.gov (United States)

Pripatnanont, Prisana; Nuntanaranont, Thongchai; Chungpanich, Supis

2002-06-01

Bio-Oss is natural bovine bone mineral, which has the property of bone conduction. It is recommended to be used in two- or three-walled bony defects with an ample supply of pleuripotential cells. Two cases are reported. The first was an intentional replantation, because of previous trauma, of a hopeless tooth affected with severe periodontitis. The tooth was replanted after complete elimination of granulation tissue. Bio-Oss, together with a guided tissue regeneration (GTR) membrane, was used to enhance periodontal regeneration. After 2 years of follow-up, the replanted tooth was quite stable. In the second case, Bio-Oss, together with bone taken from the retromolar area, was used in a sinus lift grafting procedure after the removal of two supernumerary teeth from the floor of the maxillary sinus. Four months after grafting, an orthodontic treatment was applied to move the two adjacent teeth through the grafted site and align them in the proper position. The clinical results of the two cases were satisfactory.

Spectral Analysis of Forecast Error Investigated with an Observing System Simulation Experiment

Science.gov (United States)

Prive, N. C.; Errico, Ronald M.

2015-01-01

The spectra of analysis and forecast error are examined using the observing system simulation experiment (OSSE) framework developed at the National Aeronautics and Space Administration Global Modeling and Assimilation Office (NASAGMAO). A global numerical weather prediction model, the Global Earth Observing System version 5 (GEOS-5) with Gridpoint Statistical Interpolation (GSI) data assimilation, is cycled for two months with once-daily forecasts to 336 hours to generate a control case. Verification of forecast errors using the Nature Run as truth is compared with verification of forecast errors using self-analysis; significant underestimation of forecast errors is seen using self-analysis verification for up to 48 hours. Likewise, self analysis verification significantly overestimates the error growth rates of the early forecast, as well as mischaracterizing the spatial scales at which the strongest growth occurs. The Nature Run-verified error variances exhibit a complicated progression of growth, particularly for low wave number errors. In a second experiment, cycling of the model and data assimilation over the same period is repeated, but using synthetic observations with different explicitly added observation errors having the same error variances as the control experiment, thus creating a different realization of the control. The forecast errors of the two experiments become more correlated during the early forecast period, with correlations increasing for up to 72 hours before beginning to decrease.

A study on the characteristics of retrospective optimal interpolation using an Observing System Simulation Experiment

Science.gov (United States)

Kim, Shin-Woo; Noh, Nam-Kyu; Lim, Gyu-Ho

2013-04-01

This study presents the introduction of retrospective optimal interpolation (ROI) and its application with Weather Research and Forecasting model (WRF). Song et al. (2009) suggested ROI method which is an optimal interpolation (OI) that gradually assimilates observations over the analysis window for variance-minimum estimate of an atmospheric state at the initial time of the analysis window. The assimilation window of ROI algorithm is gradually increased, similar with that of the quasi-static variational assimilation (QSVA; Pires et al., 1996). Unlike QSVA method, however, ROI method assimilates the data at post analysis time using perturbation method (Verlaan and Heemink, 1997) without adjoint model. Song and Lim (2011) improved this method by incorporating eigen-decomposition and covariance inflation. The computational costs for ROI can be reduced due to the eigen-decomposition of background error covariance which can concentrate ROI analyses on the error variances of governing eigenmodes by transforming the control variables into eigenspace. A total energy norm is used for the normalization of each control variables. In this study, ROI method is applied to WRF model with Observing System Simulation Experiment (OSSE) to validate the algorithm and to investigate the capability. Horizontal wind, pressure, potential temperature, and water vapor mixing ratio are used for control variables and observations. Firstly, 1-profile assimilation experiment is performed. Subsequently, OSSE's are performed using the virtual observing system which consists of synop, ship, and sonde data. The difference between forecast errors with assimilation and without assimilation is obviously increased as time passed, which means the improvement of forecast error with the assimilation by ROI. The characteristics and strength/weakness of ROI method are also investigated by conducting the experiments with 3D-Var (3-dimensional variational) method and 4D-Var (4-dimensional variational) method

The Impacts of Climate Change on the Discharge of Osse-Ossiomo ...

African Journals Online (AJOL)

There is a strong evidence of global warming using the index of temperature in the drainage basin. River discharge also indicated fluctuating trends from year to year in the decades with available discharge records. It was concluded that the river discharge pattern of Osse-Ossiomo River Basin, S. W. Nigeria exhibited ...

Organizational Strategy Use in Children Aged 5–7: Standardization and Validity of the Rey Complex Figure Organizational Strategy Score (RCF-OSS)

NARCIS (Netherlands)

Martens, R.; Hurks, P.P.M.; Jolles, J.

2014-01-01

This study investigated psychometric properties (standardization and validity) of the Rey Complex Figure Organizational Strategy Score (RCF-OSS) in a sample of 217 healthy children aged 5-7 years. Our results showed that RCF-OSS performance changes significantly between 5 and 7 years of age. While

Observing System Simulations for Small Satellite Formations Estimating Bidirectional Reflectance

Science.gov (United States)

Nag, Sreeja; Gatebe, Charles K.; de Weck, Olivier

2015-01-01

The bidirectional reflectance distribution function (BRDF) gives the reflectance of a target as a function of illumination geometry and viewing geometry, hence carries information about the anisotropy of the surface. BRDF is needed in remote sensing for the correction of view and illumination angle effects (for example in image standardization and mosaicing), for deriving albedo, for land cover classification, for cloud detection, for atmospheric correction, and other applications. However, current spaceborne instruments provide sparse angular sampling of BRDF and airborne instruments are limited in the spatial and temporal coverage. To fill the gaps in angular coverage within spatial, spectral and temporal requirements, we propose a new measurement technique: Use of small satellites in formation flight, each satellite with a VNIR (visible and near infrared) imaging spectrometer, to make multi-spectral, near-simultaneous measurements of every ground spot in the swath at multiple angles. This paper describes an observing system simulation experiment (OSSE) to evaluate the proposed concept and select the optimal formation architecture that minimizes BRDF uncertainties. The variables of the OSSE are identified; number of satellites, measurement spread in the view zenith and relative azimuth with respect to solar plane, solar zenith angle, BRDF models and wavelength of reflection. Analyzing the sensitivity of BRDF estimation errors to the variables allow simplification of the OSSE, to enable its use to rapidly evaluate formation architectures. A 6-satellite formation is shown to produce lower BRDF estimation errors, purely in terms of angular sampling as evaluated by the OSSE, than a single spacecraft with 9 forward-aft sensors. We demonstrate the ability to use OSSEs to design small satellite formations as complements to flagship mission data. The formations can fill angular sampling gaps and enable better BRDF products than currently possible.

Observing system simulations for small satellite formations estimating bidirectional reflectance

Science.gov (United States)

Nag, Sreeja; Gatebe, Charles K.; Weck, Olivier de

2015-12-01

The bidirectional reflectance distribution function (BRDF) gives the reflectance of a target as a function of illumination geometry and viewing geometry, hence carries information about the anisotropy of the surface. BRDF is needed in remote sensing for the correction of view and illumination angle effects (for example in image standardization and mosaicing), for deriving albedo, for land cover classification, for cloud detection, for atmospheric correction, and other applications. However, current spaceborne instruments provide sparse angular sampling of BRDF and airborne instruments are limited in the spatial and temporal coverage. To fill the gaps in angular coverage within spatial, spectral and temporal requirements, we propose a new measurement technique: use of small satellites in formation flight, each satellite with a VNIR (visible and near infrared) imaging spectrometer, to make multi-spectral, near-simultaneous measurements of every ground spot in the swath at multiple angles. This paper describes an observing system simulation experiment (OSSE) to evaluate the proposed concept and select the optimal formation architecture that minimizes BRDF uncertainties. The variables of the OSSE are identified; number of satellites, measurement spread in the view zenith and relative azimuth with respect to solar plane, solar zenith angle, BRDF models and wavelength of reflection. Analyzing the sensitivity of BRDF estimation errors to the variables allow simplification of the OSSE, to enable its use to rapidly evaluate formation architectures. A 6-satellite formation is shown to produce lower BRDF estimation errors, purely in terms of angular sampling as evaluated by the OSSE, than a single spacecraft with 9 forward-aft sensors. We demonstrate the ability to use OSSEs to design small satellite formations as complements to flagship mission data. The formations can fill angular sampling gaps and enable better BRDF products than currently possible.

Simulation-based multiprofessional obstetric anaesthesia training conducted in situ versus off-site leads to similar individual and team outcomes: a randomised educational trial

Science.gov (United States)

Sørensen, Jette Led; van der Vleuten, Cees; Rosthøj, Susanne; Østergaard, Doris; LeBlanc, Vicki; Johansen, Marianne; Ekelund, Kim; Starkopf, Liis; Lindschou, Jane; Gluud, Christian; Weikop, Pia; Ottesen, Bent

2015-01-01

Objective To investigate the effect of in situ simulation (ISS) versus off-site simulation (OSS) on knowledge, patient safety attitude, stress, motivation, perceptions of simulation, team performance and organisational impact. Design Investigator-initiated single-centre randomised superiority educational trial. Setting Obstetrics and anaesthesiology departments, Rigshospitalet, University of Copenhagen, Denmark. Participants 100 participants in teams of 10, comprising midwives, specialised midwives, auxiliary nurses, nurse anaesthetists, operating theatre nurses, and consultant doctors and trainees in obstetrics and anaesthesiology. Interventions Two multiprofessional simulations (clinical management of an emergency caesarean section and a postpartum haemorrhage scenario) were conducted in teams of 10 in the ISS versus the OSS setting. Primary outcome Knowledge assessed by a multiple choice question test. Exploratory outcomes Individual outcomes: scores on the Safety Attitudes Questionnaire, stress measurements (State-Trait Anxiety Inventory, cognitive appraisal and salivary cortisol), Intrinsic Motivation Inventory and perceptions of simulations. Team outcome: video assessment of team performance. Organisational impact: suggestions for organisational changes. Results The trial was conducted from April to June 2013. No differences between the two groups were found for the multiple choice question test, patient safety attitude, stress measurements, motivation or the evaluation of the simulations. The participants in the ISS group scored the authenticity of the simulation significantly higher than did the participants in the OSS group. Expert video assessment of team performance showed no differences between the ISS versus the OSS group. The ISS group provided more ideas and suggestions for changes at the organisational level. Conclusions In this randomised trial, no significant differences were found regarding knowledge, patient safety attitude, motivation or stress

1994 report on Tasks 4.3.1 and 4.3.2: Survey of anticipated requirements and qualification requirements for OSS

International Nuclear Information System (INIS)

Silvani, V.

1995-01-01

This is a preliminary report summarizing some topics related to the survey on functional and qualification requirements of Operator Support Systems (OSS's) in NPP's. This document has been prepared on the basis of the information presented in the previous meetings of this CRP working group. Additional information are expected when the answers to the working group questionnaire will be available. Functionalities examined are those referring to system functions and user's needs; technology trends are also considered. For practical purposes this document is divided in the followings: Summary of major OSS requirements and related problems as derived from the existing literature; appendix 1 reporting a summary of major functions performed by the OSS's presently in operation or under development in laboratories; appendix 2 reporting the list of standards for critical software. 18 refs, tabs

A comparative study of the effect of Bio-Oss® in combination with concentrated growth factors or bone marrow-derived mesenchymal stem cells in canine sinus grafting.

Science.gov (United States)

Wang, Fang; Li, Qiong; Wang, Zuolin

2017-08-01

To compare the effects of Bio-Oss ® in combination with concentrated growth factors (CGFs) and bone marrow-derived mesenchymal stem cells (BMSCs) on bone regeneration for maxillary sinus floor augmentation in beagle dogs. Six beagle dogs received bilateral maxillary sinus floor augmentation. Venous blood drawn from dogs was collected and centrifuged to obtain CGFs. BMSCs derived from canine bone marrow were cultured using density gradient centrifugation. The suspension of BMSCs was added onto Bio-Oss ® granules at a density of 2 × 10 6 cells/ml, and the BMSCs/Bio-Oss ® constructs were incubated for an additional 4 h before use. Twelve sinuses were grafted with a mixture of CGFs/Bio-Oss ® , BMSCs/Bio-Oss ® construct, or Bio-Oss ® alone. Six months later, the bone formation of bilateral sinuses was evaluated by Micro-CT, microhardness test, histological examination, and histomorphometry. No adverse effect was found in these dogs. The dome-shaped augmentation protruded into the sinus cavity. Micro-CT revealed that there was significant difference in BV/TV but not in Tb. N, between groups A, B, and C. The extent of microhardness in groups A and B was significantly higher than in group C. The proportion of newly formed bone in groups A and B showed significant difference when compared to group C (P ≤ 0.01). The amount of residual grafts in groups A and B was significantly lower than in group C. Grafting with Bio-Oss ® in combination with CGFs can increase new bone formation more efficiently than using Bio-Oss ® alone in a canine model. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

'In situ simulation' versus 'off site simulation' in obstetric emergencies and their effect on knowledge, safety attitudes, team performance, stress, and motivation

DEFF Research Database (Denmark)

Sørensen, Jette Led; Van der Vleuten, Cees; Lindschou, Jane

2013-01-01

learner outcomes. However, many questions on how SBME can be optimized remain unanswered. One unresolved issue is how 'in situ simulation' (ISS) versus 'off site simulation' (OSS) impact learning. ISS means simulation-based training in the actual patient care unit (in other words, the labor room...

Simulated experiments

International Nuclear Information System (INIS)

Bjerknes, R.

1977-01-01

A cybernetic model has been developed to elucidate some of the main principles of the growth regulation system in the epidermis of the hairless mouse. A number of actual and theoretical biological experiments have been simulated on the model. These included simulating the cell kinetics as measured by pulse labelling with tritiated thymidine and by continuous labelling with tritiated thymidine. Other simulated experiments included steady state, wear and tear, painting with a carcinogen, heredity and heredity and tumour. Numerous diagrams illustrate the results of these simulated experiments. (JIW)

Voorkomen van DDT in de bodem in Oss en opname door moestuingewassen : risico analyse van DDT in de bodem en berekening van humane blootstelling

NARCIS (Netherlands)

Römkens, P.F.A.M.; Lijzen, J.P.A.

2013-01-01

Bij het in kaart brengen van humane spoedlocaties wil de gemeente Oss inzicht krijgen in de bodemkwaliteit in tuinen waar groentes worden verbouwd en de opname van DDT door gewassen. Omdat dat mogelijk tot risico's leidt. Het is namelijk onbekend òf de sterk verhoogde gehalten in Oss ook

Comparison of in vitro biocompatibility of NanoBone(®) and BioOss(®) for human osteoblasts.

Science.gov (United States)

Liu, Qin; Douglas, Timothy; Zamponi, Christiane; Becker, Stephan T; Sherry, Eugene; Sivananthan, Sureshan; Warnke, Frauke; Wiltfang, Jörg; Warnke, Patrick H

2011-11-01

Scaffolds for bone tissue engineering seeded with the patient's own cells might be used as a preferable method to repair bone defects in the future. With the emerging new technologies of nanostructure design, new synthetic biomaterials are appearing on the market. Such scaffolds must be tested in vitro for their biocompatibility before clinical application. However, the choice between a natural or a synthetic biomaterial might be challenging for the doctor and the patient. In this study, we compared the biocompatibility of a synthetic bone substitute, NanoBone(®) , to the widely used natural bovine bone replacement material BioOss(®) . The in vitro behaviour of human osteoblasts on both materials was investigated. Cell performance was determined using scanning electron microscopy (SEM), cell vitality staining and four biocompatibility tests (LDH, MTT, WST, BrdU). We found that both materials showed low cytotoxicity and good biocompatibility. The MTT proliferation test was superior for Nanobone(®) . Both scaffolds caused only little damage to human osteoblasts and justify their clinical application. However, NanoBone(®) was able to support and promote proliferation of human osteoblasts slightly better than BioOss(®) in our chosen test set-up. The results may guide doctors and patients when being challenged with the choice between a natural or a synthetic biomaterial. Further experiments are necessary to determine the comparison of biocompatibility in vivo. © 2011 John Wiley & Sons A/S.

An Observing System Simulation Experiment of assimilating leaf area index and soil moisture over cropland

Science.gov (United States)

Lafont, Sebastien; Barbu, Alina; Calvet, Jean-Christophe

2013-04-01

A Land Data Assimilation System (LDAS) is an off-line data assimilation system featuring uncoupled land surface model which is driven by observation-based atmospheric forcing. In this study the experiments were conducted with a surface externalized (SURFEX) modelling platform developed at Météo-France. It encompasses the land surface model ISBA-A-gs that simulates photosynthesis and plant growth. The photosynthetic activity depends on the vegetation types. The input soil and vegetation parameters are provided by the ECOCLIMAP II global database which assigns the ecosystem classes in several plant functional types as grassland, crops, deciduous forest and coniferous forest. New versions of the model have been recently developed in order to better describe the agricultural plant functional types. We present a set of observing system simulation experiments (OSSE) which asses leaf area index (LAI) and soil moisture assimilation for improving the land surface estimates in a controlled synthetic environment. Synthetic data were assimilated into ISBA-A-gs using an Extended Kalman Filter (EKF). This allows for an understanding of model responses to an augmentation of the number of crop types and different parameters associated to this modification. In addition, the interactions between uncertainties in the model and in the observations were investigated. This study represents the first step of a process that envisages the extension of LDAS to the new versions of the ISBA-A-gs model in order to assimilate remote sensing observations.

NASA's Carbon Cycle OSSE Initiative - Informing future space-based observing strategies through advanced modeling and data assimilation

Science.gov (United States)

Ott, L.; Sellers, P. J.; Schimel, D.; Moore, B., III; O'Dell, C.; Crowell, S.; Kawa, S. R.; Pawson, S.; Chatterjee, A.; Baker, D. F.; Schuh, A. E.

2017-12-01

Satellite observations of carbon dioxide (CO2) and methane (CH4) are critically needed to improve understanding of the contemporary carbon budget and carbon-climate feedbacks. Though current carbon observing satellites have provided valuable data in regions not covered by surface in situ measurements, limited sampling of key regions and small but spatially coherent biases have limited the ability to estimate fluxes at the time and space scales needed for improved process-level understanding and informed decision-making. Next generation satellites will improve coverage in data sparse regions, either through use of active remote sensing, a geostationary vantage point, or increased swath width, but all techniques have limitations. The relative strengths and weaknesses of these approaches and their synergism have not previously been examined. To address these needs, a significant subset of the US carbon modeling community has come together with support from NASA to conduct a series of coordinated observing system simulation experiments (OSSEs), with close collaboration in framing the experiments and in analyzing the results. Here, we report on the initial phase of this initiative, which focused on creating realistic, physically consistent synthetic CO2 and CH4 observational datasets for use in inversion and signal detection experiments. These datasets have been created using NASA's Goddard Earth Observing System Model (GEOS) to represent the current state of atmospheric carbon as well as best available estimates of expected flux changes. Scenarios represented include changes in urban emissions, release of permafrost soil carbon, changes in carbon uptake in tropical and mid-latitude forests, changes in the Southern Ocean sink, and changes in both anthropogenic and natural methane emissions. This GEOS carbon `nature run' was sampled by instrument simulators representing the most prominent observing strategies with a focus on consistently representing the impacts of

Reuse of the compact nuclear simulator software under PC with Linux

International Nuclear Information System (INIS)

Cha, K. H.; Park, J. C.; Kwon, K. C.; Lee, G. Y.

2000-01-01

This study was approached to reuse source programs for a nuclear simulator under PC with Open Source Software(OSS) and to extend its applicability. Source programs in the Compact Nuclear Simulator(CNS), which has been operated for institutional research and training in KAERI, were reused and implemented for Linux-PC environment with the aim of supporting the study. PC with 500 MHz processor and Linux 2.2.5-22 kernel were utilized for the reuse implementation and it was investigated for some applications, through the functional testing for its main functions as interfaced with compact control panels in the current CNS. Development and upgrade of small-scale simulators, establishment of process simulation for PC, and development of prototype predictive simulation, can effectively be enabled with the experience though the reuse implementation was limited to port only CNS programs for PC with Linux

Alkaline phosphatase immobilization onto Bio-Gide(R) and Bio-Oss(R) for periodontal and bone regeneration.

NARCIS (Netherlands)

Oortgiesen, D.A.W.; Plachokova, A.S.; Geenen, C.; Meijer, G.J.; Walboomers, X.F.; Beucken, J.J.J.P van den; Jansen, J.B.M.J.

2012-01-01

AIM: To evaluate the effect of alkaline phosphatase (ALP) immobilization onto Bio-Gide((R)) in vitro, and to study the in vivo performance of ALP-enriched Bio-Gide((R)) and/or Bio-Oss((R)) with the purpose to enhance periodontal regeneration. MATERIALS AND METHODS: Alkaline phosphatase ALP was

A histologic, histomorphometric, and radiographic comparison between two complexes of CenoBoen/CenoMembrane and Bio-Oss/Bio-Gide in lateral ridge augmentation: A clinical trial.

Science.gov (United States)

Amoian, Babak; Moudi, Ehsan; Majidi, Maryam Seyed; Ali Tabatabaei, S M

2016-09-01

Several grafting materials have been used for alveolar ridge augmentation. The literature lacks researches to compare CenoBone to other grafting materials. The aim of this study was to compare CenoBone/CenoMembrane complex to Bio-Oss/Bio-Gide complex in lateral alveolar bone augmentation in terms of radiographic, histologic, and histomorphometric parameters. In this randomized controlled trial, ten patients who needed lateral ridge augmentation were selected and augmentations were done using either of CenoBone/CenoMembrane or Bio-Oss/Bio-Gide complexes. In the re-entry surgery in 6 months following augmentation, core biopsies were taken and clinical, radiographic, histologic, and histomorphometric evaluations were performed. No statistically significant difference was seen between groups except for the number of blood vessels and percentage of residual graft materials. CenoBone seems to present a comparable lateral ridge augmentation to Bio-Oss in.

Simulation-based multiprofessional obstetric anaesthesia training conducted in situ versus off-site leads to similar individual and team outcomes: a randomised educational trial

NARCIS (Netherlands)

Sorensen, J.L.; Vleuten, C. van der; Rosthoj, S.; Ostergaard, D.; Leblanc, V.; Johansen, M.; Ekelund, K.; Starkopf, L.; Lindschou, J.; Gluud, C.; Weikop, P.; Ottesen, B.

2015-01-01

OBJECTIVE: To investigate the effect of in situ simulation (ISS) versus off-site simulation (OSS) on knowledge, patient safety attitude, stress, motivation, perceptions of simulation, team performance and organisational impact. DESIGN: Investigator-initiated single-centre randomised superiority

GerOSS (German Obstetric Surveillance System). A Project to Improve the Treatment of Obstetric Rare Diseases and Complications Using a Web Based Documentation and Information Platform.

Science.gov (United States)

Berlage, S; Grüßner, S; Lack, N; Franz, H B G

2015-01-01

Severe and very rare obstetric complications (e.g. eclampsia, postpartum haemorrhage or uterine rupture), typically culminate in a chaotic, uncontrollable sequence of events. Outcome for mother and child depends on whether doctors and midwives are able to quickly take correct decisions and initiate optimal treatment. GerOSS (German Obstetric Surveillance System) aims at generating deeper insight into relevant risk factors to improve diagnosis and treatment of severe complications during pregnancy and delivery. As such it is primarily conceived as a system for quality improvement and less as a register. Another focus is the provision of an information and communication platform for dissemination of these insights. Finally, incidences of selected rare obstetric events may be derived. These rare events are monitored for two to five years in Lower Saxony, Bavaria and Berlin. Quantitative analyses of aggregate data are complemented with in depth case based anonymised evaluations by experts. The temporal sequence of measures taken as well as the management of care is inspected. Participants receive a feedback of comments on the synopsis of individual cases. Aggregate data results are published and made available through the GerOSS platform. A scientific advisory committee ensures the link with the professional scientific bodies. A comparison within INOSS (International Network of Obstetric Survey Systems) allows additional insights into the treatment of obstetric rare diseases and complications. More reliable estimates of the incidence of such events can be computed and compared within a larger database. Following the implementation in three federal states in Germany in 2010, participation in GerOSS-Project has increased to 100% of all hospitals with a delivery unit in Lower Saxony, 30% in Bavaria and 80% in Berlin. Feasibility of the project is shown by successful implementation of GerOSS. Quantitative analyses enable construction of risk profiles (e.g. for the

Effective assimilation of global precipitation: simulation experiments

Directory of Open Access Journals (Sweden)

Guo-Yuan Lien

2013-07-01

Full Text Available Past attempts to assimilate precipitation by nudging or variational methods have succeeded in forcing the model precipitation to be close to the observed values. However, the model forecasts tend to lose their additional skill after a few forecast hours. In this study, a local ensemble transform Kalman filter (LETKF is used to effectively assimilate precipitation by allowing ensemble members with better precipitation to receive higher weights in the analysis. In addition, two other changes in the precipitation assimilation process are found to alleviate the problems related to the non-Gaussianity of the precipitation variable: (a transform the precipitation variable into a Gaussian distribution based on its climatological distribution (an approach that could also be used in the assimilation of other non-Gaussian observations and (b only assimilate precipitation at the location where at least some ensemble members have precipitation. Unlike many current approaches, both positive and zero rain observations are assimilated effectively. Observing system simulation experiments (OSSEs are conducted using the Simplified Parametrisations, primitivE-Equation DYnamics (SPEEDY model, a simplified but realistic general circulation model. When uniformly and globally distributed observations of precipitation are assimilated in addition to rawinsonde observations, both the analyses and the medium-range forecasts of all model variables, including precipitation, are significantly improved as compared to only assimilating rawinsonde observations. The effect of precipitation assimilation on the analyses is retained on the medium-range forecasts and is larger in the Southern Hemisphere (SH than that in the Northern Hemisphere (NH because the NH analyses are already made more accurate by the denser rawinsonde stations. These improvements are much reduced when only the moisture field is modified by the precipitation observations. Both the Gaussian transformation and

Het handgevormde aardewerk uit de ijzertijd en de Romeinse tijd van Oss-Ussen. Studies naar typochronologie, technologie en herkomst

NARCIS (Netherlands)

Broeke, Pieter Willem (Peter) van den

2012-01-01

The primary objective of the investigation of the handmade pottery from Oss-Ussen was the composition of a detailed type-chronology of the locally produced pottery, preferably applicable to a wider area than the Maaskant region. On basis of pottery assemblages from pits, wells etc. fourteen pottery

Developer Initiation and Social Interactions in OSS: A Case Study of the Apache Software Foundation

Science.gov (United States)

2014-08-01

pp. 201–215, 2003. 2. K. Crowston, K. Wei, J. Howison, and A. Wiggins, “Free/ libre open-source software devel- opment: What we know and what we do not...Understanding the process of participating in open source communities,” in International Workshop on Emerging Trends in Free/ Libre /Open Source Software ...Noname manuscript No. (will be inserted by the editor) Developer Initiation and Social Interactions in OSS: A Case Study of the Apache Software

Simulation - modeling - experiment; Simulation - modelisation - experience

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

After two workshops held in 2001 on the same topics, and in order to make a status of the advances in the domain of simulation and measurements, the main goals proposed for this workshop are: the presentation of the state-of-the-art of tools, methods and experiments in the domains of interest of the Gedepeon research group, the exchange of information about the possibilities of use of computer codes and facilities, about the understanding of physical and chemical phenomena, and about development and experiment needs. This document gathers 18 presentations (slides) among the 19 given at this workshop and dealing with: the deterministic and stochastic codes in reactor physics (Rimpault G.); MURE: an evolution code coupled with MCNP (Meplan O.); neutronic calculation of future reactors at EdF (Lecarpentier D.); advance status of the MCNP/TRIO-U neutronic/thermal-hydraulics coupling (Nuttin A.); the FLICA4/TRIPOLI4 thermal-hydraulics/neutronics coupling (Aniel S.); methods of disturbances and sensitivity analysis of nuclear data in reactor physics, application to VENUS-2 experimental reactor (Bidaud A.); modeling for the reliability improvement of an ADS accelerator (Biarotte J.L.); residual gas compensation of the space charge of intense beams (Ben Ismail A.); experimental determination and numerical modeling of phase equilibrium diagrams of interest in nuclear applications (Gachon J.C.); modeling of irradiation effects (Barbu A.); elastic limit and irradiation damage in Fe-Cr alloys: simulation and experiment (Pontikis V.); experimental measurements of spallation residues, comparison with Monte-Carlo simulation codes (Fallot M.); the spallation target-reactor coupling (Rimpault G.); tools and data (Grouiller J.P.); models in high energy transport codes: status and perspective (Leray S.); other ways of investigation for spallation (Audoin L.); neutrons and light particles production at intermediate energies (20-200 MeV) with iron, lead and uranium targets (Le Colley F

Simulator experiments: effects of NPP operator experience on performance

International Nuclear Information System (INIS)

Beare, A.N.; Gray, L.H.

1984-01-01

During the FY83 research, a simulator experiment was conducted at the control room simulator for a GE Boiling Water Reactor (BWR) NPP. The research subjects were licensed operators undergoing requalification training and shift technical advisors (STAs). This experiment was designed to investigate the effects of senior reactor operator (SRO) experience, operating crew augmentation with an STA and practice, as a crew, upon crew and individual operator performance, in response to anticipated plant transients. Sixteen two-man crews of licensed operators were employed in a 2 x 2 factorial design. The SROs leading the crews were split into high and low experience groups on the basis of their years of experience as an SRO. One half of the high- and low-SRO experience groups were assisted by an STA. The crews responded to four simulated plant casualties. A five-variable set of content-referenced performance measures was derived from task analyses of the procedurally correct responses to the four casualties. System parameters and control manipulations were recorded by the computer controlling the simulator. Data on communications and procedure use were obtained from analysis of videotapes of the exercises. Questionnaires were used to collect subject biographical information and data on subjective workload during each simulated casualty. For four of the five performance measures, no significant differences were found between groups led by high (25 to 114 months) and low (1 to 17 months as an SRO) experience SROs. However, crews led by low experience SROs tended to have significantly shorter task performance times than crews led by high experience SROs. The presence of the STA had no significant effect on overall team performance in responding to the four simulated casualties. The FY84 experiments are a partial replication and extension of the FY83 experiment, but with PWR operators and simulator

Validation of two complementary oral-health related quality of life indicators (OIDP and OSS 0-10 in two qualitatively distinct samples of the Spanish population

Directory of Open Access Journals (Sweden)

Albaladejo A

2008-11-01

Full Text Available Abstract Background Oral health-related quality of life can be assessed positively, by measuring satisfaction with mouth, or negatively, by measuring oral impact on the performance of daily activities. The study objective was to validate two complementary indicators, i.e., the OIDP (Oral Impacts on Daily Performances and Oral Satisfaction 0–10 Scale (OSS, in two qualitatively different socio-demographic samples of the Spanish adult population, and to analyse the factors affecting both perspectives of well-being. Methods A cross-sectional study was performed, recruiting a Validation Sample from randomly selected Health Centres in Granada (Spain, representing the general population (n = 253, and a Working Sample (n = 561 randomly selected from active Regional Government staff, i.e., representing the more privileged end of the socio-demographic spectrum of this reference population. All participants were examined according to WHO methodology and completed an in-person interview on their oral impacts and oral satisfaction using the OIDP and OSS 0–10 respectively. The reliability and validity of the two indicators were assessed. An alternative method of describing the causes of oral impacts is presented. Results The reliability coefficient (Cronbach's alpha of the OIDP was above the recommended 0.7 threshold in both Validation and Occupational samples (0.79 and 0.71 respectively. Test-retest analysis confirmed the external reliability of the OSS (Intraclass Correlation Coefficient, 0.89; p Conclusion OIDP and OSS are valid and reliable subjective measures of oral impacts and oral satisfaction, respectively, in an adult Spanish population. Exploring simultaneously these issues may provide useful insights into how satisfaction and impact on well-being are constructed.

Simulator experiments: effects of NPP operator experience on performance

International Nuclear Information System (INIS)

Beare, A.N.; Gray, L.H.

1985-01-01

Experiments are being conducted on nuclear power plant (NPP) control room training simulators by the Oak Ridge National Laboratory, its subcontractor, General Physics Corporation, and participating utilities. The experiments are sponsored by the Nuclear Regulatory Commission's (NRC) Human Factors and Safeguards Branch, Division of Risk Analysis and Operations, and are a continuation of prior research using simulators, supported by field data collection, to provide a technical basis for NRC human factors regulatory issues concerned with the operational safety of nuclear power plants. During the FY83 research, a simulator experiment was conducted at the control room simulator for a GE boiling water reactor (BWR) NPP. The research subjects were licensed operators undergoing requalification training and shift technical advisors (STAs). This experiment was designed to investigate the effects of (a) senior reactor operator (SRO) experience, (b) operating crew augmentation with an STA and (c) practice, as a crew, upon crew and individual operator performance, in response to anticipated plant transients. The FY84 experiments are a partial replication and extension of the FY83 experiment, but with PWR operators and simulator. Methodology and results to date are reported

Géorgie-Ossétie-Russie. Une guerre à toutes les échelles

Directory of Open Access Journals (Sweden)

Julien Thorez

2009-02-01

Full Text Available En août 2008, le Caucase a été le théâtre d’une guerre opposant la Géorgie à la Russie, à l’issue de laquelle la Russie a décidé de reconnaître la souveraineté de l’Abkhazie et de l’Ossétie du Sud, régions sécessionnistes géorgiennes indépendantes de facto depuis le début des années 1990. Déclenchée par le président géorgien M. Saakachvili, cette guerre a découlé de la superposition dans le Caucase d’aspirations géopolitiques contraires. L’article aborde les enjeux de ce conflit selon une approche multiscalaire, en mettant en perspective les aspirations séparatistes abkhazes et ossètes, la politique d’unification et de modernisation de l’Etat Géorgien, la complexité de la relation post-coloniale entretenue par la Russie et la Géorgie et les rivalités géopolitiques internationales inscrites dans les réalités caucasiennesIn August 2008, after the war against Georgia, Russia decided to recognize the sovereignty of the secessionist Georgian regions of Abkhazia and south Ossetia, which are de facto independent since the early 1990’s. This war, unleashed by the action of he Georgian president M. Saakashvili, was a consequence of a clash between contrasting geopolitical goals in Caucasus. This article adopts a multi-scale approach to explain the war, analyzing its various dimensions, starting with the Abkhazian and Ossetian separatisms and the Georgian policy, aimed at “unifying” and modernizing the country, but dealing as well with the complex relationship between Russia and Georgia and finally with the wider international geopolitical rivalries playing out in the Caucasus.

Reproducible computational biology experiments with SED-ML--the Simulation Experiment Description Markup Language.

Science.gov (United States)

Waltemath, Dagmar; Adams, Richard; Bergmann, Frank T; Hucka, Michael; Kolpakov, Fedor; Miller, Andrew K; Moraru, Ion I; Nickerson, David; Sahle, Sven; Snoep, Jacky L; Le Novère, Nicolas

2011-12-15

The increasing use of computational simulation experiments to inform modern biological research creates new challenges to annotate, archive, share and reproduce such experiments. The recently published Minimum Information About a Simulation Experiment (MIASE) proposes a minimal set of information that should be provided to allow the reproduction of simulation experiments among users and software tools. In this article, we present the Simulation Experiment Description Markup Language (SED-ML). SED-ML encodes in a computer-readable exchange format the information required by MIASE to enable reproduction of simulation experiments. It has been developed as a community project and it is defined in a detailed technical specification and additionally provides an XML schema. The version of SED-ML described in this publication is Level 1 Version 1. It covers the description of the most frequent type of simulation experiments in the area, namely time course simulations. SED-ML documents specify which models to use in an experiment, modifications to apply on the models before using them, which simulation procedures to run on each model, what analysis results to output, and how the results should be presented. These descriptions are independent of the underlying model implementation. SED-ML is a software-independent format for encoding the description of simulation experiments; it is not specific to particular simulation tools. Here, we demonstrate that with the growing software support for SED-ML we can effectively exchange executable simulation descriptions. With SED-ML, software can exchange simulation experiment descriptions, enabling the validation and reuse of simulation experiments in different tools. Authors of papers reporting simulation experiments can make their simulation protocols available for other scientists to reproduce the results. Because SED-ML is agnostic about exact modeling language(s) used, experiments covering models from different fields of research

Reproducible computational biology experiments with SED-ML - The Simulation Experiment Description Markup Language

Science.gov (United States)

2011-01-01

Background The increasing use of computational simulation experiments to inform modern biological research creates new challenges to annotate, archive, share and reproduce such experiments. The recently published Minimum Information About a Simulation Experiment (MIASE) proposes a minimal set of information that should be provided to allow the reproduction of simulation experiments among users and software tools. Results In this article, we present the Simulation Experiment Description Markup Language (SED-ML). SED-ML encodes in a computer-readable exchange format the information required by MIASE to enable reproduction of simulation experiments. It has been developed as a community project and it is defined in a detailed technical specification and additionally provides an XML schema. The version of SED-ML described in this publication is Level 1 Version 1. It covers the description of the most frequent type of simulation experiments in the area, namely time course simulations. SED-ML documents specify which models to use in an experiment, modifications to apply on the models before using them, which simulation procedures to run on each model, what analysis results to output, and how the results should be presented. These descriptions are independent of the underlying model implementation. SED-ML is a software-independent format for encoding the description of simulation experiments; it is not specific to particular simulation tools. Here, we demonstrate that with the growing software support for SED-ML we can effectively exchange executable simulation descriptions. Conclusions With SED-ML, software can exchange simulation experiment descriptions, enabling the validation and reuse of simulation experiments in different tools. Authors of papers reporting simulation experiments can make their simulation protocols available for other scientists to reproduce the results. Because SED-ML is agnostic about exact modeling language(s) used, experiments covering models from

Pyro shock simulation: Experience with the MIPS simulator

Science.gov (United States)

Dwyer, Thomas J.; Moul, David S.

1988-01-01

The Mechanical Impulse Pyro Shock (MIPS) Simulator at GE Astro Space Division is one version of a design that is in limited use throughout the aerospace industry, and is typically used for component shock testing at levels up to 10,000 response g's. Modifications to the force imput, table and component boundary conditions have allowed a range of test conditions to be achieved. Twelve different designs of components with weights up to 23 Kg are in the process or have completed qualification testing in the Dynamic Simulation Lab at GE in Valley Forge, Pa. A summary of the experience gained through the use of this simulator is presented as well as examples of shock experiments that can be readily simulated at the GE Astro MIPS facility.

Monte Carlo simulation of experiments

International Nuclear Information System (INIS)

Opat, G.I.

1977-07-01

An outline of the technique of computer simulation of particle physics experiments by the Monte Carlo method is presented. Useful special purpose subprograms are listed and described. At each stage the discussion is made concrete by direct reference to the programs SIMUL8 and its variant MONTE-PION, written to assist in the analysis of the radiative decay experiments μ + → e + ν sub(e) antiνγ and π + → e + ν sub(e)γ, respectively. These experiments were based on the use of two large sodium iodide crystals, TINA and MINA, as e and γ detectors. Instructions for the use of SIMUL8 and MONTE-PION are given. (author)

Open Source Software Development Experiences on the Students' Resumes: Do They Count?--Insights from the Employers' Perspectives

Science.gov (United States)

Long, Ju

2009-01-01

Open Source Software (OSS) is a major force in today's Information Technology (IT) landscape. Companies are increasingly using OSS in mission-critical applications. The transparency of the OSS technology itself with openly available source codes makes it ideal for students to participate in the OSS project development. OSS can provide unique…

Bio-oss in Treatment of Furcation Class II Deffects and Comparison with Coronally Positioned Flap

Directory of Open Access Journals (Sweden)

Ak.Khoshkhoo Nejad

2004-09-01

Full Text Available Statement of Problem: Among periodontal defects, the furcation involvement represents one of the most chalenging scenarios due to the difficulty of achieving a predictable improvement regardless of the type of periodontal therapy. Moreover, the presence of furcation involvement has been demonstrated to considerably affect tooth prognosis. Thus, treatment of furcation defects is a challenge in clinical periodontics. The aim of periodontal treatment is not only to control infection but also to regenerate periodontal tissues lost as a consequence of periodontal disease.Purpose: The purpose of this study was to compare Bio-oss (Bo, an anorganic bovine bone Xenograft, in combination with coronally positioned flap to open flap debridment surgery with coronally positiond flap alone in human mandibular class II furcation defects.Materials and Methods: In this clinical trial and interventional study 24 furcations, which provided 12 pairs of similar periodontal defects were evaluated. Each defect was randomly assigned to treatment with Bio-Oss in combination coronally positioned flap or open flap debridment and coronally positioned flap alone. Following basic therapy, baseline measurements were recorded including probing depth (PDD, clinical attachment level (CAL,gingival recession (REC, keratinized gingiva (KG and closed horizontal probing depth(CHPD. After 6 months, all sites were re-entered and hard tissue measurements were recorded.Hard tissue measurements were performed during surgery to determine open horizontal probing depth (OHPD and open vertical probing depth (OVPD. The data was analyzed using t-test paired sample.Results: Vertical probing depth reduction of 3.17±1.32 mm and horizontal probing depth reduction of 4.42±1.02 mm were noted for the BO group, with 2.87±0.83 mm and 2.31±0.49 mm reductions, respectively, noted for CPF alone. Both surgical procedures resulted in statistically significant probing depth reduction and gain clinical

Nonmetastatic osteosarcoma of the extremity. Neoadjuvant chemotherapy with methotrexate, cisplatin, doxorubicin and ifosfamide. An Italian Sarcoma Group study (ISG/OS-Oss).

Science.gov (United States)

Ferrari, Stefano; Meazza, Cristina; Palmerini, Emanuela; Tamburini, Angela; Fagioli, Franca; Cozza, Raffaele; Ferraresi, Virginia; Bisogno, Gianni; Mascarin, Maurizio; Cefalo, Graziella; Manfrini, Marco; Capanna, Rodolfo; Biagini, Roberto; Donati, Davide; Picci, Piero

2014-01-01

Based on the results of the ISG/OS-1 study, the MAP regimen (methotrexate [MTX], doxorubicin [ADM] and cisplatin [CDP] with the addition of ifosfamide [IFO] in poor-responder patients) was investigated in patients with nonmetastatic osteosarcoma of the extremity (ISG/OS-Oss study). Compared with the ISG/OS-1 study (cumulative doses: ADM 420 mg/m(2), MTX 120 g/m(2), CDP 600 mg/m(2), IFO 30 g/m(2)), the ISG/OS-Oss study reduced the number of MTX cycles from 10 to 5 (cumulative MTX dose: 60 g/m(2)) in order to diminish treatment duration and toxicity. From January 2007 to June 2011, 171 patients (median age 16 years, 60% males) were registered. The limb salvage rate was 94% and the good pathologic response rate 51% (these figures were 92% and 48%, respectively, in the ISG/OS-1 study). At a median follow-up of 39 months (range, 4-80), the 5-year overall survival rate was 80% (95% CI, 73%-87%) and the event-free survival was 50% (95% CI, 39%-59%). For comparison, the 5-year overall and event-free survival rates in ISG/OS-1 were 73% (95% CI, 65%-81%) and 64% (95% CI, 56%-73%), respectively. This study confirms that in nonmetastatic osteosarcoma of the extremity, conservative surgery in more than 90% and a good pathologic response rate of 50% can be expected with primary chemotherapy based on the MAP regimen. The response and resection rates in the ISG/OS-Oss study are in the same range as those of the previous study, whereas the event-free survival is lower than that previously achieved. Since the only difference between the two studies was the cumulative dose of postoperatively given MTX, our data support the importance of the cumulative dose of MTX in the MAP regimen.

Clarifying the learning experiences of healthcare professionals with in situ and off-site simulation-based medical education

DEFF Research Database (Denmark)

Sørensen, Jette Led; Navne, Laura Emdal; Martin, Helle Max

2015-01-01

-five healthcare professionals (obstetricians, midwives, auxiliary nurses, anaesthesiologists, a nurse anaesthetist and operating theatre nurse) participated in four focus groups and were recruited due to their exposure to either ISS or OSS in multidisciplinary obstetric emergencies in a randomised trial. SETTING...

Hopper Flow: Experiments and Simulation

Science.gov (United States)

Li, Zhusong; Shattuck, Mark

2013-03-01

Jamming and intermittent granular flow are important problems in industry, and the vertical hopper is a canonical example. Clogging of granular hoppers account for significant losses across many industries. We use realistic DEM simulations of gravity driven flow in a hopper to examine flow and jamming of 2D disks and compare with identical companion experiments. We use experimental data to validate simulation parameters and the form of the inter particle force law. We measure and compare flow rate, emptying times, jamming statistics, and flow fields as a function of opening angle and opening size in both experiment and simulations. Suppored by: NSF-CBET-0968013

Ridge preservation of extraction sockets with chronic pathology using Bio-Oss® Collagen with or without collagen membrane: an experimental study in dogs.

Science.gov (United States)

Kim, Jung-Ju; Schwarz, Frank; Song, Hyun Young; Choi, YoonMi; Kang, Kyung-Rim; Koo, Ki-Tae

2017-06-01

This study aimed to evaluate the dynamics of newly bone formation and dimensional change in diseased extraction sockets using Bio-Oss ® Collagen with or without a collagen membrane. In six beagle dogs, right and left 3rd and 4th mandibular premolars were hemisected and the distal roots were removed. Combined endodontic-periodontic lesions were induced in all sites using black silk, collagen sponge, endodontic files, and application of Porphyromonas gingivalis. After 4 months, among 4 premolars, three teeth were randomly selected per dog and allocated to the following experimental groups: Control group (no treatment but debridement), Test 1 group (only Bio-Oss ® Collagen graft), and Test 2 group (Bio-Oss ® Collagen graft with a collagen membrane). After 7 months from the baseline, the beagle dogs were sacrificed for histomorphometric and Micro-CT analysis. The vertical distance between buccal and lingual crests in the Control group (2.22 ± 0.26 mm) and Test 2 group (1.80 ± 0.16 mm) was significantly different. The socket of the Test 2 group (27.04 ± 5.25%) was occupied by a greater quantity of bone graft compared to the Test 1 group (18.49 ± 2.11%). Ridge preservation in diseased extraction sockets could compensate for buccal bone resorption by contact osteogenesis surrounding the bone graft particles at the bucco-coronal area during socket healing, and the application of a collagen membrane at the entrance of the socket is useful for preserving graft material at the coronal part of the socket. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Simulation of a complete inelastic neutron scattering experiment

DEFF Research Database (Denmark)

Edwards, H.; Lefmann, K.; Lake, B.

2002-01-01

A simulation of an inelastic neutron scattering experiment on the high-temperature superconductor La2-xSrxCuO4 is presented. The complete experiment, including sample, is simulated using an interface between the experiment control program and the simulation software package (McStas) and is compared...... with the experimental data. Simulating the entire experiment is an attractive alternative to the usual method of convoluting the model cross section with the resolution function, especially if the resolution function is nontrivial....

Effective management of bone fractures with the IlluminOss® photodynamic bone stabilization system: initial clinical experience from the European Union registry

Directory of Open Access Journals (Sweden)

Thomas Gausepohl

2017-02-01

Full Text Available The IlluminOss® system (IS uses a light-curable polymer contained within an inflatable balloon catheter, forming a patient customized intramedullary implant. A registry was established in Germany and The Netherlands to prospectively collect technical and clinical outcomes in patients treated with IS for fractures of the phalange, metacarpal, radius, ulna, distal radius, fibula, clavicle and/or olecranon. Humeral, femoral, tibial and pelvic fractures were included under compassionate use. Procedural success included successful placement of the device at the target fracture site and achievement of fracture stabilization. Clinical and radiographic assessments were made postoperatively through 12 months. One hundred thirty two patients (149 fractures were enrolled with most fractures (85% resulting from low-energy trauma. Simple fractures predominated (47% followed by complex (23% and wedge (16% fractures. Procedural success was achieved in all patients and no implants required removal or revision. Normal range of motion was realized in 87% of fractures. Radiographically, there was substantial cortical bridging, total dissolution of the fracture line, and complete fracture healing. Across a variety of fracture types, the IS provides a safe and effective approach for rapid healing and functional recovery.

The Evolution of Spacelab Ultraviolet Astronomy Missions from OSS-3 through -7 to Astro-1

Science.gov (United States)

Gull, Theodore

2018-01-01

In the 1960s and 1970s, NASA was building towards a robust program in space astronomy. An evolutionary step from ground-based astronomy to space astronomy was human operation of space telescopes as astronomy in general evolved from astronomers directly at the telescope to application of computers and long distance communications to control to operate remote telescopes. Today ground-based telescopes and space observatories from cubesats to the Hubble Space Telescope and soon the James Webb Space Telescope are routinely operated remotely.In response to the Spacelab Announcement of Opportunity in the early 1980s, three ultraviolet experiments – the Hopkins Ultraviolet Telescope, the Ultraviolet Imaging Telescope and the Wisconsin Ultraviolet PhotoPolarimetry Experiment -- all instruments derived from multiple sounding rocket flights--were selected to fly as an integrated payload attached to a space shuttle. The justification for professional astronomers, both as Mission Specialists from the astronaut cadre and Payload Specialists from the instrument teams, was built to ensure key technical skills both of the science and the instruments. Bundled together as OSS-3 through -7 flights focused on Comet Halley, the experiments went through many changes and delays as a pathfinder for an anticipated series of attached astronomy payloads.By 1986, the five-flight mission had evolved into two missions, Astro-1 dedicated primarily to observe Halley’s Comet in early March 1986 and Astro-2 to fly about one year later. Due to the Challenger disaster 35 days before scheduled launch of Astro-1, the mission went through an initial cancellation and then re-scheduling once the instrument complement of Astro-1 was expanded to include Broad Band X-ray Telescope with emphasis on studying SN1987A. Ultimately Astro-1 flew in December 1990 partnered with an X-ray experiment focused on SN1987A.The nine-day mission was mostly successful despite multiple technical issues overcome by the NASA

Simulation Exploration Experience 2018 Overview

Science.gov (United States)

Paglialonga, Stephen; Elfrey, Priscilla; Crues, Edwin Z.

2018-01-01

The Simulation Exploration Experience (SEE) joins students, industry, professional associations, and faculty together for an annual modeling and simulation (M&S) challenge. SEE champions collaborative collegiate-level modeling and simulation by providing a venue for students to work in highly dispersed inter-university teams to design, develop, test, and execute simulated missions associated with space exploration. Participating teams gain valuable knowledge, skills, and increased employability by working closely with industry professionals, NASA, and faculty advisors. This presentation gives and overview of the SEE and the upcoming 2018 SEE event.

Comparison of electron cloud simulation and experiments in the high-current experiment

International Nuclear Information System (INIS)

Cohen, R.H.; Friedman, A.; Covo, M. Kireeff; Lund, S.M.; Molvik, A.W.; Bieniosek, F.M.; Seidl, P.A.; Vay, J.-L.; Verboncoeur, J.; Stoltz, P.; Veitzer, S.

2004-01-01

A set of experiments has been performed on the High-Current Experiment (HCX) facility at LBNL, in which the ion beam is allowed to collide with an end plate and thereby induce a copious supply of desorbed electrons. Through the use of combinations of biased and grounded electrodes positioned in between and downstream of the quadrupole magnets, the flow of electrons upstream into the magnets can be turned on or off. Properties of the resultant ion beam are measured under each condition. The experiment is modeled via a full three-dimensional, two species (electron and ion) particle simulation, as well as via reduced simulations (ions with appropriately chosen model electron cloud distributions, and a high-resolution simulation of the region adjacent to the end plate). The three-dimensional simulations are the first of their kind and the first to make use of a timestep-acceleration scheme that allows the electrons to be advanced with a timestep that is not small compared to the highest electron cyclotron period. The simulations reproduce qualitative aspects of the experiments, illustrate some unanticipated physical effects, and serve as an important demonstration of a developing simulation capability

Simulated experiments in modern physics

International Nuclear Information System (INIS)

Tirnini, Mahmud Hasan

1981-01-01

Author.In this thesis a number of the basic experiments of atomic and nuclear physics are simulated on a microcomputer interfaced to a chart recorder and CRT. These will induce the student to imagine that he is actually performing the experiments. He will collect data to be worked out. The thesis covers the relevant material to set up such experiments in the modern physics laboratory

BEATBOX v1.0: Background Error Analysis Testbed with Box Models

Science.gov (United States)

Knote, Christoph; Barré, Jérôme; Eckl, Max

2018-02-01

The Background Error Analysis Testbed (BEATBOX) is a new data assimilation framework for box models. Based on the BOX Model eXtension (BOXMOX) to the Kinetic Pre-Processor (KPP), this framework allows users to conduct performance evaluations of data assimilation experiments, sensitivity analyses, and detailed chemical scheme diagnostics from an observation simulation system experiment (OSSE) point of view. The BEATBOX framework incorporates an observation simulator and a data assimilation system with the possibility of choosing ensemble, adjoint, or combined sensitivities. A user-friendly, Python-based interface allows for the tuning of many parameters for atmospheric chemistry and data assimilation research as well as for educational purposes, for example observation error, model covariances, ensemble size, perturbation distribution in the initial conditions, and so on. In this work, the testbed is described and two case studies are presented to illustrate the design of a typical OSSE experiment, data assimilation experiments, a sensitivity analysis, and a method for diagnosing model errors. BEATBOX is released as an open source tool for the atmospheric chemistry and data assimilation communities.

BEATBOX v1.0: Background Error Analysis Testbed with Box Models

Directory of Open Access Journals (Sweden)

C. Knote

2018-02-01

Full Text Available The Background Error Analysis Testbed (BEATBOX is a new data assimilation framework for box models. Based on the BOX Model eXtension (BOXMOX to the Kinetic Pre-Processor (KPP, this framework allows users to conduct performance evaluations of data assimilation experiments, sensitivity analyses, and detailed chemical scheme diagnostics from an observation simulation system experiment (OSSE point of view. The BEATBOX framework incorporates an observation simulator and a data assimilation system with the possibility of choosing ensemble, adjoint, or combined sensitivities. A user-friendly, Python-based interface allows for the tuning of many parameters for atmospheric chemistry and data assimilation research as well as for educational purposes, for example observation error, model covariances, ensemble size, perturbation distribution in the initial conditions, and so on. In this work, the testbed is described and two case studies are presented to illustrate the design of a typical OSSE experiment, data assimilation experiments, a sensitivity analysis, and a method for diagnosing model errors. BEATBOX is released as an open source tool for the atmospheric chemistry and data assimilation communities.

Global field experiments for potato simulations

DEFF Research Database (Denmark)

Raymundo, Rubí; Asseng, Senthold; Prasad, Rishi

2018-01-01

A large field potato experimental dataset has been assembled for simulation modeling. The data are from temperate, subtropical, and tropical regions across the world and include 87 experiments with 204 treatments. Treatments include nitrogen fertilizer, irrigation, atmospheric CO2 levels, tempera......A large field potato experimental dataset has been assembled for simulation modeling. The data are from temperate, subtropical, and tropical regions across the world and include 87 experiments with 204 treatments. Treatments include nitrogen fertilizer, irrigation, atmospheric CO2 levels...

Simulation - modeling - experiment

International Nuclear Information System (INIS)

2004-01-01

After two workshops held in 2001 on the same topics, and in order to make a status of the advances in the domain of simulation and measurements, the main goals proposed for this workshop are: the presentation of the state-of-the-art of tools, methods and experiments in the domains of interest of the Gedepeon research group, the exchange of information about the possibilities of use of computer codes and facilities, about the understanding of physical and chemical phenomena, and about development and experiment needs. This document gathers 18 presentations (slides) among the 19 given at this workshop and dealing with: the deterministic and stochastic codes in reactor physics (Rimpault G.); MURE: an evolution code coupled with MCNP (Meplan O.); neutronic calculation of future reactors at EdF (Lecarpentier D.); advance status of the MCNP/TRIO-U neutronic/thermal-hydraulics coupling (Nuttin A.); the FLICA4/TRIPOLI4 thermal-hydraulics/neutronics coupling (Aniel S.); methods of disturbances and sensitivity analysis of nuclear data in reactor physics, application to VENUS-2 experimental reactor (Bidaud A.); modeling for the reliability improvement of an ADS accelerator (Biarotte J.L.); residual gas compensation of the space charge of intense beams (Ben Ismail A.); experimental determination and numerical modeling of phase equilibrium diagrams of interest in nuclear applications (Gachon J.C.); modeling of irradiation effects (Barbu A.); elastic limit and irradiation damage in Fe-Cr alloys: simulation and experiment (Pontikis V.); experimental measurements of spallation residues, comparison with Monte-Carlo simulation codes (Fallot M.); the spallation target-reactor coupling (Rimpault G.); tools and data (Grouiller J.P.); models in high energy transport codes: status and perspective (Leray S.); other ways of investigation for spallation (Audoin L.); neutrons and light particles production at intermediate energies (20-200 MeV) with iron, lead and uranium targets (Le Colley F

COMPASS Simulation for PHEBUS FPT-3 Experiment

Energy Technology Data Exchange (ETDEWEB)

Bae, Jun Ho; Kim, Jongtae; Park, Rae-Jun; Son, Donggun; Kim, Dong Ha [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The objective of this paper is to assess the core degradation modeling in COMPASS code by simulating the PHEBUS FPT3 experiment. For the comparison purpose, the numerical simulation by using MELCOR 2.1 have also conducted for the FPT3 experiment. Consequently, COMPASS results of PHEBUS FPT3 have been compared with the experimental data and MELCOR results. For the purpose of COMPASS code validation, the numerical simulation for PHEBUS FPT3 experiment has been conducted. The temperature of the main component has been secured by using COMPASS code for a fuel, cladding, control rod and surrounding structure. And they are compared with that of experimental data as well as MELCOR simulation results. MELCOR are showing that an oxidational reaction starts a little bit earlier time and has the slightly higher value of the accumulated hydrogen mass, while COMPASS code predicts the slightly lower value of the accumulated hydrogen mass.

Virtual geotechnical laboratory experiments using a simulator

Science.gov (United States)

Penumadu, Dayakar; Zhao, Rongda; Frost, David

2000-04-01

The details of a test simulator that provides a realistic environment for performing virtual laboratory experimentals in soil mechanics is presented. A computer program Geo-Sim that can be used to perform virtual experiments, and allow for real-time observations of material response is presented. The results of experiments, for a given set of input parameters, are obtained with the test simulator using well-trained artificial neural-network-based soil models for different soil types and stress paths. Multimedia capabilities are integrated in Geo-Sim, using software that links and controls a laser disc player with a real-time parallel processing ability. During the simulation of a virtual experiment, relevant portions of the video image of a previously recorded test on an actual soil specimen are dispalyed along with the graphical presentation of response from the feedforward ANN model predictions. The pilot simulator developed to date includes all aspects related to performing a triaxial test on cohesionless soil under undrained and drained conditions. The benefits of the test simulator are also presented.

[Paraosteal osteosarcoma of the tibia treated with the OSS prosthesis. Case report].

Science.gov (United States)

Ochoa-Cázares, S; Mancilla, J A; Cuadra-Castillo, M

2014-01-01

Parosteal osteosarcoma originates on the surface of long bones and spares the medullary canal. Its peak incidence occurs in the third decade of life and it is more frequent in females than males. The juxtacortical variety of parosteal osteosarcoma is one of the most common ones, accounting for 1-6% of all osteosarcomas. The classical radiographic appearance of osteosarcoma includes high ossification density and a lobed mass, usually in the posterior aspect of the distal femur, sparing the medullary canal. We report herein the case of a 31 year-old male patient with a clinical picture that included left knee pain and who was seen as outpatient. He was started on treatment for enbloc resection of the tumor and implantation of the OSS (Orthopedic Salvage System) prosthesis. Treatment consisted of broad resection of the proximal tibia, of approximately 14 cm, as well as the implantation of a nonconventional modular tibial prosthesis. Both the radiographic and the clinical results were good and appropriate at the three week follow up.

Maxillary sinus floor elevation surgery with BioOss (R) mixed with a bone marrow concentrate or autogenous bone : test of principle on implant survival and clinical performance

NARCIS (Netherlands)

Rickert, D.; Vissink, A.; Slot, Jan; Sauerbier, S.; Meijer, H. J. A.; Raghoebar, G. M.

The purpose of this study was to assess implant survival and 1-year clinical performance of implants placed in the posterior maxilla that had been subjected to maxillary sinus floor elevation surgery with bovine bone mineral (BioOss (R)) mixed with autogenous bone marrow concentrate or autogenous

Labotratory Simulation Experiments of Cometary Plasma

OpenAIRE

MINAMI, S.; Baum, P. J.; Kamin, G.; White, R. S.; 南, 繁行

1986-01-01

Laboratory simulation experiment to study the interaction between a cometary plasma and the solar wind has been performed using the UCR-T 1 space simulation facility at the Institute of Geophysics and Planetary Physics, the University of California, Riverside. Light emitting plasma composed of Sr, Ba and/or C simulating cometary coma plasma is produced by a plasma emitter which interacts with intense plasma flow produced by a co-axial plasma gun simulating the solar wind. The purpose of this ...

Further experience in simulation of rod drop experiments in the Loviisa and Mochovce reactors

International Nuclear Information System (INIS)

Siltanen, P.; Kaloinen, E.; Tanskanen, A.; Mattila, R.

2001-01-01

Simulations of reactor scram experiments using the 3-dimensional kinetics code HEXTRAN have been updated for the initial cores of Loviisa-1 and 2 Mochovce-1 and have been extended to burned cores of Loviisa-1. In these simulations, the entire experiment is simulated dynamically, including the behaviour of the core, the signal of the ionization chamber, and the inverse point kinetics of the reactivity meter. The predicted output of the reactivity meter is compared with the output observed during the experiment (Authors)

Erosion products in disruption simulation experiments

International Nuclear Information System (INIS)

Safronov, V.; Arkhipov, N.; Bakhtin, V.; Barsuk, V.; Kurkin, S.; Mironova, E.; Toporkov, D.; Vasenin, S.; Zhitlukhin, A.; Arkhipov, I.; Werle, H.; Wuerz, H.

1998-01-01

Erosion of divertor materials under tokamak disruption event presents a serious problem of ITER technology. Erosion restricts the divertor lifetime and leads to production of redeposited layers of the material retaining large amount of tritium, which is a major safety issue for future fusion reactor. Since ITER disruptive heat loads are not achievable in existing tokamaks, material erosion is studied in special simulation experiments. Till now the simulation experiments have focused mainly on investigation of shielding effect and measurement of erosion rate. In the present work the properties of eroded and redeposited graphite are studied under condition typical for hard ITER disruption. (author)

Working with NASA's OSS E/PO Support Network

Science.gov (United States)

Miner, E. D.; Lowes, L. L.

2001-11-01

With greater and greater emphasis on the inclusion of a public engagement component in all government-supported research funding, many members of the DPS are finding it difficult to find sufficient time and funding to develop a wide-reaching and effective E/PO program. NASA's Office of Space Science, over the last five years, has built a Support Network to assist its funded scientists to establish partnerships with local and/or national science formal or informal education organizations, who are anxious to connect with and use the expertise of space scientists. The OSS Support Network consists of four theme-based 'Forums,' including the Solar System Exploration (SSE) Forum, specifically designed for working with planetary scientists, and seven regional 'Brokers-Facilitators' who are more familiar with partnership and other potential avenues for involvement by scientists. The services provided by the Support Network are free to both the scientists and their potential partners and is not limited to NASA-funded scientists. In addition to its assistance to space scientists, the Support Network is involved in a number of other overarching efforts, including support of a Solar System Ambassador Program, a Solar System Educator Program, Space Place (web and e-mail science products for libraries and small planetariums and museums), an on-line Space Science Resource Directory, annual reports of Space Science E/PO activity, identifying and filling in 'holes' and 'over-populations' in a solar system E/PO product matrix of grade level versus product versus content, research on product effectiveness, and scientific and educational evaluation of space science products. Forum and Broker-Facilitator contact information is available at http://spacescience.nasa.gov/education/resources/ecosystem/index.htm. Handouts with additional information will be available at the meeting.

Contribution to the Task 4.3.1 investigate how training should be planned to ensure efficient utilization of OSS. Task 4.3.2 evaluate how the introduction of OSS influences requirements to the basic education of the operator

International Nuclear Information System (INIS)

Balducelli, C.

1995-01-01

The introduction of computerized supports to improve efficiency in the activity of an intelligent agent (the operator in NPP case) increases the agent training demand. In fact also the informatic support can be viewed as an ''artificial agent'', more or less ''active'' depending on its internal degree of autonomy: the human agent needs to be trained to ''coordinate'' his behaviour with the behaviour of the artificial agent. The basic idea of this work is that a more safe, complete and integrated OSS could be a system (an artificial agent) that gives support to the human agent not only during the plant real operations, but also during the different phases of operator education and training for normal and emergency situations management. 7 refs, 2 figs

Simulation of integrated beam experiment designs

International Nuclear Information System (INIS)

Grote, D.P.; Sharp, W.M.

2004-01-01

Simulation of designs of an Integrated Beam Experiment (IBX) class accelerator have been carried out. These simulations are an important tool for validating such designs. Issues such as envelope mismatch and emittance growth can be examined in a self-consistent manner, including the details of injection, accelerator transitions, long-term transport, and longitudinal compression. The simulations are three-dimensional and time-dependent, and begin at the source. They continue up through the end of the acceleration region, at which point the data is passed on to a separate simulation of the drift compression. Results are be presented

Simulation of the Impact of New Aircraft-and Satellite-based Ocean Surface Wind Measurements on Wind Analyses and Numerical Forecasts

Science.gov (United States)

Miller, TImothy; Atlas, Robert; Black, Peter; Chen, Shuyi; Jones, Linwood; Ruf, Chris; Uhlhorn, Eric; Gamache, John; Amarin, Ruba; El-Nimri, Salem;

Engaging in Argument from Evidence and the Ocean Sciences Sequence for Grades 3-5: A case study in complementing professional learning experiences with instructional materials aligned to instructional goals

Science.gov (United States)

Schoedinger, S. E.; Weiss, E. L.

2016-12-01

K-5 science teachers, who often lack a science background, have been tasked with a huge challenge in implementing NGSS—to completely change their instructional approach from one that views science as a body of knowledge to be imparted to one that is epistemic in nature. We have found that providing high-quality professional learning (PL) experiences is often not enough and that teachers must have instructional materials that align with their instructional goals. We describe a case study in which the Lawrence Hall of Science (the Hall) used the Hall-developed Ocean Sciences Sequence for Grades 3-5 (OSS 3-5) to support a rigorous PL program for grade 3-5 teachers focused on the NGSS science and engineering practice, engaging in argument from evidence. Developed prior to the release of NGSS, the Ocean Literacy Framework and the NGSS precursor, A Framework for K-12 Science Education, informed the content and instructional approaches of OSS 3-5. OSS 3-5 provides a substantial focus on making evidence-based explanations (and other science practices), while building students' ocean sciences content knowledge. From 2013-2015, the Hall engaged cohorts of teachers in a rigorous PL experience focused on engaging in argument from evidence. During the summer, teachers attended a week-long institute, in which exemplar activities from OSS 3-5 were used to model instructional practices to support arguing from evidence and related practices, e.g., developing and using models and constructing explanations. Immediately afterward, teachers enacted what they'd learned during a two-week summer school practicum. Here, they team-taught the OSS 3-5 curriculum, participated in video reflection groups, and received coaching and just-in-time input from instructors. In the subsequent academic year, many teachers began by teaching OSS 3-5 so that they could practice engaging students in argumentation in curriculum they'd already used for that purpose. Throughout the year, teachers

Simulation of the Quench-06 experiment with Scdapsim

International Nuclear Information System (INIS)

Angel M, E. del; Nunez C, A.; Amador G, R.

2003-01-01

The present work describes the pattern of the called Quench installation developed and used by the National Commission of Nuclear Security and Safeguards (CNSNS) for their participation in the International Standard Problem 45 (ISP), organized by the Nuclear Energy Agency (NEA). The exercise consisted on the simulation of the denominated experiment Quench-06 carried out in the experimental installation Quench located in the Forschungszentrum laboratory in Karlsruhe, Germany. The experiment Quench-06 consisted on simulating the sudden and late injection of water in a fuel assemble for a pressurized reactor (PWR). The CNSNS uses the version bd of the SCDAPSIM code developed by the company Innovative Software Systems (ISS) to simulate this experiment. The obtained results showed that the code is able to predict the experiment partially when overestimating the hydrogen production and of the partial fused of some fuel pellets, but predicting correctly the damage in the shroud. (Author)

Simulation-based multiprofessional obstetric anaesthesia training conducted in situ versus off-site leads to similar individual and team outcomes

DEFF Research Database (Denmark)

Sørensen, Jette Led; van der Vleuten, Cees; Rosthøj, Susanne

2015-01-01

choice question test. EXPLORATORY OUTCOMES: Individual outcomes: scores on the Safety Attitudes Questionnaire, stress measurements (State-Trait Anxiety Inventory, cognitive appraisal and salivary cortisol), Intrinsic Motivation Inventory and perceptions of simulations. Team outcome: video assessment......OBJECTIVE: To investigate the effect of in situ simulation (ISS) versus off-site simulation (OSS) on knowledge, patient safety attitude, stress, motivation, perceptions of simulation, team performance and organisational impact. DESIGN: Investigator-initiated single-centre randomised superiority...... educational trial. SETTING: Obstetrics and anaesthesiology departments, Rigshospitalet, University of Copenhagen, Denmark. PARTICIPANTS: 100 participants in teams of 10, comprising midwives, specialised midwives, auxiliary nurses, nurse anaesthetists, operating theatre nurses, and consultant doctors...

Impact of detector simulation in particle physics collider experiments

Science.gov (United States)

Daniel Elvira, V.

2017-06-01

Through the last three decades, accurate simulation of the interactions of particles with matter and modeling of detector geometries has proven to be of critical importance to the success of the international high-energy physics (HEP) experimental programs. For example, the detailed detector modeling and accurate physics of the Geant4-based simulation software of the CMS and ATLAS particle physics experiments at the European Center of Nuclear Research (CERN) Large Hadron Collider (LHC) was a determinant factor for these collaborations to deliver physics results of outstanding quality faster than any hadron collider experiment ever before. This review article highlights the impact of detector simulation on particle physics collider experiments. It presents numerous examples of the use of simulation, from detector design and optimization, through software and computing development and testing, to cases where the use of simulation samples made a difference in the precision of the physics results and publication turnaround, from data-taking to submission. It also presents estimates of the cost and economic impact of simulation in the CMS experiment. Future experiments will collect orders of magnitude more data with increasingly complex detectors, taxing heavily the performance of simulation and reconstruction software. Consequently, exploring solutions to speed up simulation and reconstruction software to satisfy the growing demand of computing resources in a time of flat budgets is a matter that deserves immediate attention. The article ends with a short discussion on the potential solutions that are being considered, based on leveraging core count growth in multicore machines, using new generation coprocessors, and re-engineering HEP code for concurrency and parallel computing.

Planar radiative shock experiments and their comparison to simulations

International Nuclear Information System (INIS)

Reighard, A. B.; Drake, R. P.; Mucino, J. E.; Knauer, J. P.; Busquet, M.

2007-01-01

Recent experiments have obtained radiographic data from shock waves driven at >100 km/s in xenon gas, and Thomson scattering data from similar experiments using argon gas. Presented here is a review of these experiments, followed by an outline of the discrepancies between the data and the results of one-dimensional simulations. Simulations using procedures that work well for similar but nonradiative experiments show inconsistencies between the measured position of the interface of the beryllium and xenon and the calculated position for these experiments. Sources of the discrepancy are explored

Design and Analysis of simulation experiments : Tutorial

NARCIS (Netherlands)

Kleijnen, J.P.C.

2017-01-01

This tutorial reviews the design and analysis of simulation experiments. These experiments may have various goals: validation, prediction, sensitivity analysis, optimization (possibly robust), and risk or uncertainty analysis. These goals may be realized through metamodels. Two types of metamodels

Mixed reality ventriculostomy simulation: experience in neurosurgical residency.

Science.gov (United States)

Hooten, Kristopher G; Lister, J Richard; Lombard, Gwen; Lizdas, David E; Lampotang, Samsun; Rajon, Didier A; Bova, Frank; Murad, Gregory J A

2014-12-01

Medicine and surgery are turning toward simulation to improve on limited patient interaction during residency training. Many simulators today use virtual reality with augmented haptic feedback with little to no physical elements. In a collaborative effort, the University of Florida Department of Neurosurgery and the Center for Safety, Simulation & Advanced Learning Technologies created a novel "mixed" physical and virtual simulator to mimic the ventriculostomy procedure. The simulator contains all the physical components encountered for the procedure with superimposed 3-D virtual elements for the neuroanatomical structures. To introduce the ventriculostomy simulator and its validation as a necessary training tool in neurosurgical residency. We tested the simulator in more than 260 residents. An algorithm combining time and accuracy was used to grade performance. Voluntary postperformance surveys were used to evaluate the experience. Results demonstrate that more experienced residents have statistically significant better scores and completed the procedure in less time than inexperienced residents. Survey results revealed that most residents agreed that practice on the simulator would help with future ventriculostomies. This mixed reality simulator provides a real-life experience, and will be an instrumental tool in training the next generation of neurosurgeons. We have now implemented a standard where incoming residents must prove efficiency and skill on the simulator before their first interaction with a patient.

Description of the plasma diagnostics package (PDP) for the OSS-1 Shuttle mission and JSC plasma chamber test in conjunction with the fast pulse electron gun (FPEG)

Science.gov (United States)

Shawhan, S. D.

1982-01-01

The objectives, equipment, and techniques for the plasma diagnostics package (PDP) carried by the OSS-1 instrument payload of the STS-4 and scheduled for the Spacelab-2 mission are described. The goals of the first flight were to examine the Orbiter-magnetoplasma interactions by measuring the electric and magnetic field strengths, the ionized particle wakes, and the generated waves. The RMS was employed to lift the unit out of the bay in order to allow characterization of the fields, EM interference, and plasma contamination within 15 m of the Orbiter. The PDP will also be used to examine plasma depletion, chemical reaction rates, waves, and energized plasma produced by firing of the Orbiter thrusters. Operation of the PDP was carried out in the NASA Space Environment Simulation Laboratory test chamber, where the PDP was used to assay the fields, fluxes, wave amplitudes, and particle energy spectra. The PDP instrumentation is also capable of detecting thermal ions, thermal electrons suprathermal particles, VHF/UHF EMI levels, and the S-band field strength.

Students’ Expectations and Experiences of Meaningful Simulation-Based Medical Education

Directory of Open Access Journals (Sweden)

Tuulikki Keskitalo

2016-11-01

Full Text Available This study aims to investigate students’ expectations and experiences of meaningful learning in simulation-based learning environments. We set the following research question: How do students’ experiences of meaningful simulation-based learning correspond to their expectations? The students’ (n = 87; male 51, female 36 pre- and post-questionnaires were analyzed using statistical methods. The results indicated that students’ expectations and experiences of meaningful learning were positive, and for most statements, there were statistically significant differences between the mean pre-questionnaire rating and the mean post-questionnaire rating, thereby indicating that students’ actual experiences of simulation-based learning were more positive than their expectations. Thus, students’ experiences exceeded their expectations.

Operator training and the training simulator experience

International Nuclear Information System (INIS)

Mills, D.

The author outlines the approach used by Ontario Hydro to train operators from the day they are hired as Operators-in-Training until they are Authorized Unit First Operators. He describes in detail the use of the simulator in the final year of the authorization program, drawing on experience with the Pickering NGS A simulator. Simulators, he concludes, are important aids to training but by no means all that is required to guarantee capable First Operators

Guiding Simulations and Experiments using Continuation

DEFF Research Database (Denmark)

When applying continuation of periodic solutions to high-dimensional finite element models one might face a dilemma. The mesh resolution and thus the dimension N of the model are typically chosen such that a given computer system can store the information necessary to perform one integration step...... for dimension N, but not for larger dimensions. In other words, a model is usually implemented as a carefully derived implicit integration scheme tailored for numerically stable simulations with the highest spacial resolution admitted by the computational power available. On the other hand, stable numerical...... developed method of control based continuation allows the continuation of periodic solutions without a reduction of the model resolution, and even directly in physical experiments. Moreover, both a simulation as well as an experiment can run asynchronously from the actual continuation method, which...

Simulation Application for the LHCb Experiment

CERN Document Server

Belyaev, I; Easo, S; Mato, P; Palacios, J; Pokorski, Witold; Ranjard, F; Van Tilburg, J; Charpentier, Ph.

2003-01-01

We describe the LHCb detector simulation application (Gauss) based on the Geant4 toolkit. The application is built using the Gaudi software framework, which is used for all event-processing applications in the LHCb experiment. The existence of an underlying framework allows several common basic services such as persistency, interactivity, as well as detector geometry description or particle data to be shared between simulation, reconstruction and analysis applications. The main benefits of such common services are coherence between different event-processing stages as well as reduced development effort. The interfacing to Geant4 toolkit is realized through a facade (GiGa) which minimizes the coupling to the simulation engine and provides a set of abstract interfaces for configuration and event-by-event communication. The Gauss application is composed of three main blocks, i.e. event generation, detector response simulation and digitization which reflect the different stages performed during the simulation job...

Numerical simulation of energy efficiency measures: control and operational strategies

International Nuclear Information System (INIS)

Ardehali, M. M.

2006-01-01

The inherent limitation in performance of building envelop components and heating ventilating and air conditioning (HVAC) equipment necessitates the examination of operational strategies for improvement in energy-efficient operation of buildings. Due to the ease of installation and increasing availability of electronic controllers, operational strategies that could be programmed are of particular interest. The Iowa Energy Center in the US has taken the initiative to conduct the necessary assessment of current HVAC technology and the commonly-used operational strategies for commercial and industrial buildings, as applied to the midwestern part of the country, with weather and energy cost data for Des Moines, Iowa. The first part of this study focused on the energy consumption and cost effectiveness of HVAC systems. The objectives of the second part is concerned with examination of various operational strategies, namely, night purge (NP), fan optimum start and stop (OSS), condenser water reset (CWR), and chilled water reset (CHWR) applied to order and newer-type commercial office buildings. The indoor air quality requirement are met and the latest applicable energy rates from local utility companies are used. The results show that, in general, NP is not an effective strategy in buildings with low thermal mass storage, OSS reduced fan energy, and CWR and CHWR could be effective and require chillers with multi-stage unloading characteristics. The most operationally efficient strategies are the combination of OSS, CWR, and CHWR for the older-type building, and OSS for the newer-type building. Economically, the most effective is the OSS strategy for the older-type building and the CHWR strategy for the newer-type building.(Author)

How Do Simulated Error Experiences Impact Attitudes Related to Error Prevention?

Science.gov (United States)

Breitkreuz, Karen R; Dougal, Renae L; Wright, Melanie C

2016-10-01

The objective of this project was to determine whether simulated exposure to error situations changes attitudes in a way that may have a positive impact on error prevention behaviors. Using a stratified quasi-randomized experiment design, we compared risk perception attitudes of a control group of nursing students who received standard error education (reviewed medication error content and watched movies about error experiences) to an experimental group of students who reviewed medication error content and participated in simulated error experiences. Dependent measures included perceived memorability of the educational experience, perceived frequency of errors, and perceived caution with respect to preventing errors. Experienced nursing students perceived the simulated error experiences to be more memorable than movies. Less experienced students perceived both simulated error experiences and movies to be highly memorable. After the intervention, compared with movie participants, simulation participants believed errors occurred more frequently. Both types of education increased the participants' intentions to be more cautious and reported caution remained higher than baseline for medication errors 6 months after the intervention. This study provides limited evidence of an advantage of simulation over watching movies describing actual errors with respect to manipulating attitudes related to error prevention. Both interventions resulted in long-term impacts on perceived caution in medication administration. Simulated error experiences made participants more aware of how easily errors can occur, and the movie education made participants more aware of the devastating consequences of errors.

Simulation Application for the LHCb Experiment

CERN Document Server

Pokorski, Witold

2003-01-01

We describe the LHCb detector simulation application (Gauss) based on the Geant4 toolkit. The application is built using the Gaudi software framework, which is used for all event-processing applications in the LHCb experiment. The existence of an underlying framework allows several common basic services such as persistency, interactivity, as well as detector geometry description or particle data to be shared between simulation, reconstruction and analysis applications. The main benefits of such common services are coherence between different event-processing stages as well as reduced development effort. The interfacing to Geant4 toolkit is realized through a façade (GiGa) which minimizes the coupling to the simulation engine and provides a set of abstract interfaces for configuration and event-by-event communication. The Gauss application is composed of three main blocks, i.e. event generation, detector response simulation and digitization which reflect the different stages performed during the simulation jo...

Rainfall simulation experiments in the Southwestern USA using the Walnut Gulch rainfall simulator

Science.gov (United States)

The dataset contains hydrological, erosion, vegetation, ground cover, and other supplementary information from 272 rainfall simulation experiments conducted on 23 semi-arid rangeland locations in Arizona and Nevada between 2002 and 2013. On 30% of the plots simulations were conducted up to five time...

Radioactive source simulation for half-life experiment

International Nuclear Information System (INIS)

Wanitsuksombut, Warapon; Decthyothin, Chanti

1999-01-01

A simulation of radioactivity decay by using programmable light source with a few minutes half-life is suggested. A photodiode with digital meter label in cps is use instead of radiation detector. Both light source and photodiode are installed in a black box to avoid surrounding room light. The simulation set can also demonstrate Inverse Square Law experiment of radiation penetration. (author)

Global field experiments for potato simulations

NARCIS (Netherlands)

Raymundo, Rubi; Asseng, Senthold; Prasad, Rishi; Kleinwechter, Ulrich; Condori, Bruno; Bowen, Walter; Wolf, Joost; Olesen, Jørgen E.; Dong, Qiaoxue; Zotarelli, Lincoln; Gastelo, Manuel; Alva, Ashok; Travasso, Maria; Arora, Vijay

2018-01-01

A large field potato experimental data set has been assembled for simulation modeling. The data are from temperate, subtropical, and tropical regions across the world and include 87 experiments with 204 treatments. Treatments include nitrogen fertilizer, irrigation, atmospheric CO2 levels,

Application of 2-D Simulations to Z-Pinch Experiment Design and Analysis

International Nuclear Information System (INIS)

Peterson, D.L.; Bowers, R.L.; Matuska, W.; Chandler, G.A.; Deeney, C.; Derzon, M.S.; Matzen, M.K.; Mock, R.C.; Nash, T.J.; Sanford, T.W.L.; Spielman, R.B.; Struve, K.W.

1998-01-01

The successful 2-D simulations of z-pinch experiments (reproducing such features as the measured experimental current drive, radiation pulse shape, peak power and total radiated energy) can lead to a better understanding of the underlying physics in z-pinch implosions and to the opportunity to use such simulations in the analysis of experimental data and in the design of new experiments. Such use has been made with LANL simulations of experiments on the Sandia Saturn and Z accelerators. Applications have included ''vacuum'' and ''dynamic'' hohlraum experiments; variations in mass, radius and length; and ''nested'' array configurations. Notable examples include the explanation of the power/length results in reduced length pinches and the prediction of the current best power and pulsewidth nested array experiment. Examples of circumstances where the simulation results do not match the experiments will be given along with a discussion of opportunities for improved simulation results

On the feasibility of monitoring carbon monoxide in the lower troposphere from a constellation of Northern Hemisphere geostationary satellites. (Part 1)

Science.gov (United States)

Barré, Jérôme; Edwards, David; Worden, Helen; Da Silva, Arlindo; Lahoz, William

2015-07-01

By the end of the current decade, there are plans to deploy several geostationary Earth orbit (GEO) satellite missions for atmospheric composition over North America, East Asia and Europe with additional missions proposed. Together, these present the possibility of a constellation of geostationary platforms to achieve continuous time-resolved high-density observations over continental domains for mapping pollutant sources and variability at diurnal and local scales. In this paper, we use a novel approach to sample a very high global resolution model (GEOS-5 at 7 km horizontal resolution) to produce a dataset of synthetic carbon monoxide pollution observations representative of those potentially obtainable from a GEO satellite constellation with predicted measurement sensitivities based on current remote sensing capabilities. Part 1 of this study focuses on the production of simulated synthetic measurements for air quality OSSEs (Observing System Simulation Experiments). We simulate carbon monoxide nadir retrievals using a technique that provides realistic measurements with very low computational cost. We discuss the sampling methodology: the projection of footprints and areas of regard for geostationary geometries over each of the North America, East Asia and Europe regions; the regression method to simulate measurement sensitivity; and the measurement error simulation. A detailed analysis of the simulated observation sensitivity is performed, and limitations of the method are discussed. We also describe impacts from clouds, showing that the efficiency of an instrument making atmospheric composition measurements on a geostationary platform is dependent on the dominant weather regime over a given region and the pixel size resolution. These results demonstrate the viability of the ;instrument simulator; step for an OSSE to assess the performance of a constellation of geostationary satellites for air quality measurements. We describe the OSSE results in a follow up

Descontaminación microbiana de la maca (Lepidium meyenii aplicando el sistema de esterilización orgánica (OSS para preservar sus propiedades nutricionales y sensoriales

Directory of Open Access Journals (Sweden)

Américo Guevara Pérez

2016-01-01

Full Text Available La investigación tuvo como objetivo aplicar el sistema de esterilización orgánica (OSS en maca, determinando los parámetros del proceso: tiempo y temperatura de inyección de vapor saturado que reduzcan el recuento de microorganismos aerobios, mohos, levaduras, E. Coli, salmonella y coliformes totales, y evaluando la influencia del proceso en el contenido total de glucosinolatos. La máxima descontaminación microbiana de la maca se logró aplicando una carga de 5 kg/saquillo, por 6 min. Con una temperatura de inyección de vapor saturado de 100 °C. Bajo estas condiciones, la reducción de la carga microbiana fue de 99,9% (< 10 UFC/g, 50% (< 10 UFC/g y 93,3% (< 10 UFC/g para aerobios, mohos, y levaduras, respectivamente; el comportamiento de patógenos fue muy similar al de la materia prima: E. coli < 3 UFC/g, ausencia de salmonella (25 g y < 3 UFC/g para coliformes totales. El contenido de glucosinolatos se mantuvo durante el proceso en 1,5 μmol/g, lo que evidenció que al aplicar la tecnología OSS se logra conservar la calidad nutricional, sensorial y funcional de la maca.

Simulation of containment atmosphere stratification experiment using local instantaneous description

International Nuclear Information System (INIS)

Babic, M.; Kljenak, I.

2004-01-01

An experiment on mixing and stratification in the atmosphere of a nuclear power plant containment at accident conditions was simulated with the CFD code CFX4.4. The original experiment was performed in the TOSQAN experimental facility. Simulated nonhomogeneous temperature, species concentration and velocity fields are compared to experimental results. (author)

Self-sustained oscillations in the divertor plasma

International Nuclear Information System (INIS)

Krasheninnikov, S.I.; Kukushkin, A.S.; Pistunovich, V.I.; Pozharov, V.A.

1985-01-01

A simple analytical model of the edge plasma with high recycling, which relays on the presence of a small parameter - the ratio of the particle flows crossing the magnetic field to those impinging onto the divertor target, is proposed. A concept of the one-dimensional steady state (OSS) is introduced as the zero approximation in the small parameter. The mean number density N-tilde of the particles - ions plus neutrals - in the magnetic flux tube is choosen as the most representative and convenient parameter of the problem. The OSS are shown to be ambiguous in some N-tilde range for sufficiently high values of the energy flow entering the scrape-off layer from the bulk plasma. An equation, that describes a quasi-steady variations in OSS, is derived and a mechanism of exciting the self-sustained oscillations is developed. Results of simulation of the edge plasma oscillations are found to be in a good agreement with this mechanism, which could be responsible for the H-mode oscillations observed in the divertor experiments

CET exSim: mineral exploration experience via simulation

Science.gov (United States)

Wong, Jason C.; Holden, Eun-Jung; Kovesi, Peter; McCuaig, T. Campbell; Hronsky, Jon

2013-08-01

Undercover mineral exploration is a challenging task as it requires understanding of subsurface geology by relying heavily on remotely sensed (i.e. geophysical) data. Cost-effective exploration is essential in order to increase the chance of success using finite budgets. This requires effective decision-making in both the process of selecting the optimum data collection methods and in the process of achieving accuracy during subsequent interpretation. Traditionally, developing the skills, behaviour and practices of exploration decision-making requires many years of experience through working on exploration projects under various geological settings, commodities and levels of available resources. This implies long periods of sub-optimal exploration decision-making, before the necessary experience has been successfully obtained. To address this critical industry issue, our ongoing research focuses on the development of the unique and novel e-learning environment, exSim, which simulates exploration scenarios where users can test their strategies and learn the consequences of their choices. This simulator provides an engaging platform for self-learning and experimentation in exploration decision strategies, providing a means to build experience more effectively. The exSim environment also provides a unique platform on which numerous scenarios and situations (e.g. deposit styles) can be simulated, potentially allowing the user to become virtually familiarised with a broader scope of exploration practices. Harnessing the power of computer simulation, visualisation and an intuitive graphical user interface, the simulator provides a way to assess the user's exploration decisions and subsequent interpretations. In this paper, we present the prototype functionalities in exSim including: simulation of geophysical surveys, follow-up drill testing and interpretation assistive tools.

Computer Simulation of Einstein-Podolsky-Rosen-Bohm Experiments

NARCIS (Netherlands)

De Raedt, H.; Michielsen, K.

We review an event-based simulation approach which reproduces the statistical distributions of quantum physics experiments by generating detection events one-by-one according to an unknown distribution and without solving a wave equation. Einstein-Podolsky-Rosen-Bohm laboratory experiments are used

EnKF OSSE Experiments Assessing the Impact of HIRAD Wind Speed and HIWRAP Radial Velocity Data on Analysis of Hurricane Karl (2010)

Science.gov (United States)

Albers, Cerese; Sippel, Jason A.; Braun, Scott A.; Miller, Timothy

2012-01-01

Previous studies (e.g., Zhang et al. 2009, Weng et al. 2011) have shown that radial velocity data from airborne and ground-based radars can be assimilated into ensemble Kalman filter (EnKF) systems to produce accurate analyses of tropical cyclone vortices, which can reduce forecast intensity error. Recently, wind speed data from SFMR technology has also been assimilated into the same types of systems and has been shown to improve the forecast intensity of mature tropical cyclones. Two instruments that measure these properties were present during the NASA Genesis and Rapid Intensification Processes (GRIP) field experiment in 2010 which sampled Hurricane Karl, and will next be co-located on the same aircraft for the subsequent NASA HS3 experiment. The High Altitude Wind and Rain Profiling Radar (HIWRAP) is a conically scanning Doppler radar mounted upon NASAs Global Hawk unmanned aerial vehicle, and the usefulness of its radial velocity data for assimilation has not been previously examined. Since the radar scans from above with a fairly large fixed elevation angle, it observes a large component of the vertical wind, which could degrade EnKF analyses compared to analyses with data taken from lesser elevation angles. The NASA Hurricane Imaging Radiometer (HIRAD) is a passive microwave radiometer similar to SFMR, and measures emissivity and retrieves hurricane surface wind speeds and rain rates over a much wider swath. Thus, this study examines the impact of assimilating simulated HIWRAP radial velocity data into an EnKF system, simulated HIRAD wind speed, and HIWRAP+HIRAD with the Weather Research and Forecasting (WRF) model and compares the results to no data assimilation and also to the Truth from which the data was simulated for both instruments.

Simulations and Experiments in Astronomy and Physics

Science.gov (United States)

Maloney, F. P.; Maurone, P. A.; Dewarf, L. E.

1998-12-01

There are new approaches to teaching astronomy and physics in the laboratory setting, involving the use of computers as tools to simulate events and concepts which can be illuminated in no other reasonable way. With the computer, it is possible to travel back in time to replicate the sky as Galileo saw it. Astronomical phenomena which reveal themselves only after centuries of real time may be compressed in the computer to a simulation of several minutes. Observations simulated on the computer do not suffer from the vagaries of weather, fixed time or geographic position, or non-repeatability. In physics, the computer allows us to secure data for experiments which, by their nature, may not be amenable to human interaction. These could include experiments with very fast or very slow timescales, large number of data samples, complex or tedious manipulation of the data which hides the fundamental nature of the experiment, or data sampling which would need a specialized probe, such as for acid rain. This innovation has become possible only recently, due to the availability and affordability of sophisticated computer hardware and software. We have developed a laboratory experience for non-scientists who need an introductory course in astronomy or physics. Our approach makes extensive use of computers in this laboratory. Using commercially available software, the students use the computer as a time machine and a space craft to explore and rediscover fundamental science. The physics experiments are classical in nature, and the computer acts as a data collector and presenter, freeing the student from the tedium of repetitive data gathering and replotting. In this way, the student is encouraged to explore, to try new things, to refine the measurements, and to discover the principles underlying the observed phenomena.

Quantum chemistry simulation on quantum computers: theories and experiments.

Science.gov (United States)

Lu, Dawei; Xu, Boruo; Xu, Nanyang; Li, Zhaokai; Chen, Hongwei; Peng, Xinhua; Xu, Ruixue; Du, Jiangfeng

2012-07-14

It has been claimed that quantum computers can mimic quantum systems efficiently in the polynomial scale. Traditionally, those simulations are carried out numerically on classical computers, which are inevitably confronted with the exponential growth of required resources, with the increasing size of quantum systems. Quantum computers avoid this problem, and thus provide a possible solution for large quantum systems. In this paper, we first discuss the ideas of quantum simulation, the background of quantum simulators, their categories, and the development in both theories and experiments. We then present a brief introduction to quantum chemistry evaluated via classical computers followed by typical procedures of quantum simulation towards quantum chemistry. Reviewed are not only theoretical proposals but also proof-of-principle experimental implementations, via a small quantum computer, which include the evaluation of the static molecular eigenenergy and the simulation of chemical reaction dynamics. Although the experimental development is still behind the theory, we give prospects and suggestions for future experiments. We anticipate that in the near future quantum simulation will become a powerful tool for quantum chemistry over classical computations.

Simulation of chamber experiments

International Nuclear Information System (INIS)

Ivanov, V.G.

1981-01-01

The description of the system of computer simulation of experiments conducted by means of track detectors with film data output is given. Considered is the principle of organization of computer model of the chamber experiment comprising the following stages: generation of events, generation of measurements, ge-- neration of scanning results, generation of distorbions, generated data calibration, filtration, events reconstruction, kinematic identification, total results tape formation, analysis of the results. Generation programs are formed as special RAM-files, where the RAM-file is the text of the program written in FORTRAN and divided into structural elements. All the programs are a ''part of the ''Hydra'' system. The system possibilities are considered on the base of the CDSC-6500 computer. The five-beam event generation, creation data structure for identification and calculation by the kinematic program take about 1s of CDC-6500 computer time [ru

Simulations of DT experiments in TFTR

International Nuclear Information System (INIS)

Budny, R.; Bell, M.G.; Biglari, H.; Bitter, M.; Bush, C.; Cheng, C.Z.; Fredrickson, E.; Grek, B.; Hill, K.W.; Hsuan, H.; Janos, A.; Jassby, D.L.; Johnson, D.; Johnson, L.C.; LeBlanc, B.; McCune, D.C.; Mikkelsen, D.R.; Park, H.; Ramsey, A.T.; Sabbagh, S.A.; Scott, S.; Schivell, J.; Strachan, J.D.; Stratton, B.C.; Synakowski, E.; Taylor, G.; Zarnstorff, M.C.; Zweben, S.J.

1991-12-01

A transport code (TRANSP) is used to simulate future deuterium-tritium experiments (DT) in TFTR. The simulations are derived from 14 TFTR DD discharges, and the modeling of one supershot is discussed in detail to indicate the degree of accuracy of the TRANSP modeling. Fusion energy yields and α-particle parameters are calculated, including profiles of the α slowing down time, average energy, and of the Alfven speed and frequency. Two types of simulations are discussed. The main emphasis is on the DT equivalent, where an equal mix of D and T is substituted for the D in the initial target plasma, and for the D O in the neutral-beam injection, but the other measured beam and plasma parameters are unchanged. This simulation does not assume that α heating will enhance the plasma parameters, or that confinement will increase with T. The maximum relative fusion yield calculated for these simulations is Q DT ∼ 0.3, and the maximum α contribution to the central toroidal β is β α (0) ∼ 0.5%. The stability of toroidicity-induced Alfven eigenmodes (TAE) and kinetic ballooning modes (KBM) is discussed. The TAE mode is predicted to become unstable for some of the equivalent simulations, particularly after the termination of neutral beam injection. In the second type of simulation, empirical supershot scaling relations are used to project the performance at the maximum expected beam power. The MHD stability of the simulations is discussed

Three-Dimensional Neutral Transport Simulations of Gas Puff Imaging Experiments

International Nuclear Information System (INIS)

Stotler, D.P.; DIppolito, D.A.; LeBlanc, B.; Maqueda, R.J.; Myra, J.R.; Sabbagh, S.A.; Zweben, S.J.

2003-01-01

Gas Puff Imaging (GPI) experiments are designed to isolate the structure of plasma turbulence in the plane perpendicular to the magnetic field. Three-dimensional aspects of this diagnostic technique as used on the National Spherical Torus eXperiment (NSTX) are examined via Monte Carlo neutral transport simulations. The radial width of the simulated GPI images are in rough agreement with observations. However, the simulated emission clouds are angled approximately 15 degrees with respect to the experimental images. The simulations indicate that the finite extent of the gas puff along the viewing direction does not significantly degrade the radial resolution of the diagnostic. These simulations also yield effective neutral density data that can be used in an approximate attempt to infer two-dimensional electron density and temperature profiles from the experimental images

A teaching experience using a flight simulator: Educational Simulation in practice

Directory of Open Access Journals (Sweden)

Sergio Ruiz

2014-09-01

Full Text Available The use of appropriate Educational Simulation systems (software and hardware for learning purposes may contribute to the application of the “Learning by Doing” (LbD paradigm in classroom, thus helping the students to assimilate the theoretical concepts of a subject and acquire certain pre-defined competencies in a more didactical way. The main objective of this work is to conduct a teaching experience using a flight simulation environment so that the students of Aeronautical Management degree can assume the role of an aircraft pilot, in order to allow the students understanding the basic processes of the air navigation and observe how the new technologies can transform and improve these processes. This is especially helpful in classroom to teach the contents of the Single European Sky ATM Research (SESAR programme, an European project that introduces a new Air Traffic Management (ATM paradigm based on several relevant technological and procedural changes that will affect the entire air transportation system in the short and medium term. After the execution of several activities with a flight simulator in the classroom a short test and a satisfaction survey have been requested to the students in order to assess the teaching experience.

Simulation of the BGO-OD experiment at ELSA

Energy Technology Data Exchange (ETDEWEB)

Johnstone, Russell [University of Bonn, Physikalisches Institut, Bonn (Germany); Collaboration: BGO-OD-Collaboration

2011-07-01

The goal of the BGO Open-Dipole (BGO-OD) project is the systematic investigation of the photoproduction of mesons off the nucleon. These processes are related to the structure of both the mesons and the baryons involved in reactions typical of low-energy hadronic physics. In order to fully understand and accurately interpret the results of the BGO-OD experiment it will be necessary to have a full detector and reaction simulation so that effects from detector resolution and acceptance can be accounted for in the final results. The simulation of the BGO-OD will be be undertaken with the Explora Virtual Monte-Carlo (VMC) software framework. This allows for one common user code to be implemented under Geant4, Geant3 and Fluka. The simulation software is also an analysis tool and such flexibility will be key to an efficient final analysis of the data from the BGO-OD experiment. Presented here are current status of the simulation software for the BGO-OD project and the relevant geometry of the BGO-OD, including the central BGO rugby ball detector with the dual-layer Multiwire Proportional Chambers (MWPCs) and the forward spectrometer, consisting of a large dipole magnet, tracking detectors and the Time-of-Flight walls. Simulation of the magnetic field will also be covered.

Experiments and Numerical Simulations of Electrodynamic Tether

Science.gov (United States)

Iki, Kentaro; Kawamoto, Satomi; Takahashi, Ayaka; Ishimoto, Tomori; Yanagida, Atsushi; Toda, Susumu

As an effective means of suppressing space debris growth, the Aerospace Research and Development Directorate of the Japan Aerospace Exploration Agency (JAXA) has been investigating an active space debris removal system that employs highly efficient electrodynamic tether (EDT) technology for orbital transfer. This study investigates tether deployment dynamics by means of on-ground experiments and numerical simulations of an electrodynamic tether system. Some key parameters used in the numerical simulations, such as the elastic modulus and damping ratio of the tether, the spring constant of the coiling of the tether, and deployment friction, must be estimated, and various experiments are conducted to determine these values. As a result, the following values were obtained: The elastic modulus of the tether was 40 GPa, and the damping ratio of the tether was 0.02. The spring constant and the damping ratio of the tether coiling were 10-4 N/m and 0.025 respectively. The deployment friction was 0.038ν + 0.005 N. In numerical simulations using a multiple mass tether model, tethers with lengths of several kilometers are deployed and the attitude dynamics of satellites attached to the end of the tether and tether libration are calculated. As a result, the simulations confirmed successful deployment of the tether with a length of 500 m using the electrodynamic tether system.

Drift Chambers Simulations in BM@N Experiment

Directory of Open Access Journals (Sweden)

Fedorišin Ján

2016-01-01

Full Text Available Drift chambers constitute an important part of the tracking system of the BM@N experiment designed to study the production of baryonic matter at the Nuclotron energies. GEANT programming package is employed to investigate the drift chamber response to particles produced in relativistic nuclear collisions of C+C nuclei, which are simulated by the UrQMD and LAQGSM Monte Carlo generators. These simulations are combined with the first BM@N experimental data to estimate particle track coordinates and their errors.

A simulation program for the VIRGO experiment

International Nuclear Information System (INIS)

Caron, B.; Dominjon, A.; Flaminio, R.; Marion, F.; Massonet, L.; Morand, R.; Mours, B.; Verkindt, D.; Yvert, M.

1994-07-01

Within the VIRGO experiment a simulation program is developed providing an accurate description of the interferometric antenna behaviour, taking into account all sources of noise. Besides its future use as a tool for data analysis and for the commissioning of the apparatus, the simulation helps finalizing the design of the detector. Emphasis is put at the present time on the study of the stability of optical components implied in the global feedback control system of the interferometer. (author). 5 refs., 4 figs

A system for designing and simulating particle physics experiments

International Nuclear Information System (INIS)

Zelazny, R.; Strzalkowski, P.

1987-01-01

In view of the rapid development of experimental facilities and their costs, the systematic design and preparation of particle physics experiments have become crucial. A software system is proposed as an aid for the experimental designer, mainly for experimental geometry analysis and experimental simulation. The following model is adopted: the description of an experiment is formulated in a language (here called XL) and put by its processor in a data base. The language is based on the entity-relationship-attribute approach. The information contained in the data base can be reported and analysed by an analyser (called XA) and modifications can be made at any time. In particular, the Monte Carlo methods can be used in experiment simulation for both physical phenomena in experimental set-up and detection analysis. The general idea of the system is based on the design concept of ISDOS project information systems. The characteristics of the simulation module are similar to those of the CERN Geant system, but some extensions are proposed. The system could be treated as a component of greater, integrated software environment for the design of particle physics experiments, their monitoring and data processing. (orig.)

"FluSpec": A Simulated Experiment in Fluorescence Spectroscopy

Science.gov (United States)

Bigger, Stephen W.; Bigger, Andrew S.; Ghiggino, Kenneth P.

2014-01-01

The "FluSpec" educational software package is a fully contained tutorial on the technique of fluorescence spectroscopy as well as a simulator on which experiments can be performed. The procedure for each of the experiments is also contained within the package along with example analyses of results that are obtained using the software.

Structure-based capacitance modeling and power loss analysis for the latest high-performance slant field-plate trench MOSFET

Science.gov (United States)

Kobayashi, Kenya; Sudo, Masaki; Omura, Ichiro

2018-04-01

Field-plate trench MOSFETs (FP-MOSFETs), with the features of ultralow on-resistance and very low gate–drain charge, are currently the mainstream of high-performance applications and their advancement is continuing as low-voltage silicon power devices. However, owing to their structure, their output capacitance (C oss), which leads to main power loss, remains to be a problem, especially in megahertz switching. In this study, we propose a structure-based capacitance model of FP-MOSFETs for calculating power loss easily under various conditions. Appropriate equations were modeled for C oss curves as three divided components. Output charge (Q oss) and stored energy (E oss) that were calculated using the model corresponded well to technology computer-aided design (TCAD) simulation, and we validated the accuracy of the model quantitatively. In the power loss analysis of FP-MOSFETs, turn-off loss was sufficiently suppressed, however, mainly Q oss loss increased depending on switching frequency. This analysis reveals that Q oss may become a significant issue in next-generation high-efficiency FP-MOSFETs.

SIMULATED ANIMAL EXPERIMENTS IN TEACHING AND RESEARCH

Directory of Open Access Journals (Sweden)

Chirag B. Mistry, Shreya M. Shah, Jagatkumar D. Bhatt

2015-07-01

Full Text Available Animal experiments are of paramount importance in the pre-clinical screening of new chemical entity. On the other hand, various regulatory guidelines for animal experiments are becoming more stringent in the face of worldwide protests by animal rights activists. Moreover, simulated animal experiments’ softwares are being developed and they can be implemented in the postgraduate and graduate students’ curriculum for demonstration of standard physiological and pharmacological principles compared to real time animal experiments. In fact, implementation of virtual experiment will decrease hand on experience of animal experiments among medical students, but after medical graduation, animal experiment is lest utilized during their day to day clinical practice. Similarly, in case of postgraduate pharmacology curriculum, computer based virtual animal experiments can facilitate teaching and learning in a short span of time with various protocols, without sacrificing any animal for already established experimental outcomes.

Development of a research simulator for the study of human factors and experiments

International Nuclear Information System (INIS)

Kawano, R.; Shibuya, S.

1999-01-01

A research simulator of nuclear power plant for Human Factors was developed. It simulates the behaviors of the 1100MWe BWR nuclear power plant and has almost same functions ant scope of the simulation as a full-scope training simulator. Physical models installed in the system enable us to execute experiments with multi-malfunction scenario. A severe accident simulation package replaces the running simulation code when the maximum core temperature exceeds 1200 deg C and the core approaches meltdown conditions. The central control panel was simulated by soft panels, indicator and operational switches on the panels by computer graphics, displayed on 22 console boxes containing CRT. The introduction of soft panels and EWSs connected with LAN accomplished flexibility and extendibility. Some experiments by using the simulator were executed and the system has been improved based on the experience from the experiments. It is important to evaluate the effectiveness of any new system by using an actual plant size research simulator before its practical application to keep steady and safe operation of nuclear power plants. (author)

Comparison of GPU-Based Numerous Particles Simulation and Experiment

International Nuclear Information System (INIS)

Park, Sang Wook; Jun, Chul Woong; Sohn, Jeong Hyun; Lee, Jae Wook

2014-01-01

The dynamic behavior of numerous grains interacting with each other can be easily observed. In this study, this dynamic behavior was analyzed based on the contact between numerous grains. The discrete element method was used for analyzing the dynamic behavior of each particle and the neighboring-cell algorithm was employed for detecting their contact. The Hertzian and tangential sliding friction contact models were used for calculating the contact force acting between the particles. A GPU-based parallel program was developed for conducting the computer simulation and calculating the numerous contacts. The dam break experiment was performed to verify the simulation results. The reliability of the program was verified by comparing the results of the simulation with those of the experiment

The simulation for the ATLAS experiment Present status and outlook

CERN Document Server

Rimoldi, A; Gallas, M; Nairz, A; Boudreau, J; Tsulaia, V; Costanzo, D

2004-01-01

The simulation program for the ATLAS experiment is presently operational in a full OO environment. This important physics application has been successfully integrated into ATLAS's common analysis framework, ATHENA. In the last year, following a well stated strategy of transition from a GEANT3 to a GEANT4-based simulation, a careful validation programme confirmed the reliability, performance and robustness of this new tool, as well as its consistency with the results of previous simulation. Generation, simulation and digitization steps on different sets of full physics events we retested for performance. The same software used to simulate the full the ATLAS detector is also used with testbeam configurations. Comparisons to real data in the testbeam validate both the detector description and the physics processes within each subcomponent. In this paper we present the current status of ATLAS GEANT4 simulation, describe the functionality tests performed during its validation phase, and the experience with distrib...

Monte Carlo Simulation for the Majorana Neutrinoless Double-beta Decay Experiment

International Nuclear Information System (INIS)

Henning, Reyco; Majorana Collaboration

2005-01-01

The Majorana experiment is a proposed HPGe detector array that will primarily search for neutrinoless double-beta decay and dark matter. It will rely on pulse-shape discrimination and crystal segmentation to suppress backgrounds following careful materials selection. A critical aspect of the design phase of Majorana is a reliable simulation of the detector response, pulse formation, and its radioactive backgrounds. We are developing an adaptable and complete simulation based on GEANT 4 to address these requirements and the requirements of a modern, large collaboration experiment. The salient aspects of the simulation are presented. The Majorana experiment is presented in a parallel poster by Kareem Kazkaz

Titan's organic chemistry: Results of simulation experiments

Science.gov (United States)

Sagan, Carl; Thompson, W. Reid; Khare, Bishun N.

1992-01-01

Recent low pressure continuous low plasma discharge simulations of the auroral electron driven organic chemistry in Titan's mesosphere are reviewed. These simulations yielded results in good accord with Voyager observations of gas phase organic species. Optical constants of the brownish solid tholins produced in similar experiments are in good accord with Voyager observations of the Titan haze. Titan tholins are rich in prebiotic organic constituents; the Huygens entry probe may shed light on some of the processes that led to the origin of life on Earth.

Simulation of complete neutron scattering experiments: from model systems to liquid germanium; Simulation complete d'une experience de diffusion de neutrons: des systemes modeles au germanium liquide

Energy Technology Data Exchange (ETDEWEB)

Hugouvieux, V

2004-11-15

In this thesis, both theoretical and experimental studies of liquids are done. Neutron scattering enables structural and dynamical properties of liquids to be investigated. On the theoretical side, molecular dynamics simulations are of great interest since they give positions and velocities of the atoms and the forces acting on each of them. They also enable spatial and temporal correlations to be computed and these quantities are also available from neutron scattering experiments. Consequently, the comparison can be made between results from molecular dynamics simulations and from neutron scattering experiments, in order to improve our understanding of the structure and dynamics of liquids. However, since extracting reliable data from a neutron scattering experiment is difficult, we propose to simulate the experiment as a whole, including both instrument and sample, in order to gain understanding and to evaluate the impact of the different parasitic contributions (absorption, multiple scattering associated with elastic and inelastic scattering, instrument resolution). This approach, in which the sample is described by its structure and dynamics as computed from molecular dynamics simulations, is presented and tested on isotropic model systems. Then liquid germanium is investigated by inelastic neutron scattering and both classical and ab initio molecular dynamics simulations. This enables us to simulate the experiment we performed and to evaluate the influence of the contributions from the instrument and from the sample on the detected signal. (author)

Simulation platform for remote participants in fusion experiments

International Nuclear Information System (INIS)

Barrera, E.; Ruiz, M.; Lopez, S.; Vega, J.; Sanchez, E.

2004-01-01

One of the major challenges in remote participation in fusion experiments is the control from remote locations of the data acquisition and treatment process. In an optimum situation, the remote researcher should be able to control the data acquisition configuration parameters, and data processing, specifying the results that must be returned to him. The simulation platform presented here, allows the researcher to develop and test complex algorithms in a high level graphical language (LabVIEW), which includes powerful data processing libraries. These algorithms will be downloaded later into the data acquisition system. Furthermore, the platform allows the simulation of hardware data acquisition, which include the following points: (a) simulation of channel configuration from one or several data acquisition cards (channels used, sample frequencies, etc.), (b) generation of buffered simulated data (it is also possible the use of raw data, acquired in previous experiments, as simulated data), and (c) reproduction of hardware behavior (except, of course, in terms of real time behavior and real data). For this purpose, Virtual Instruments (VIs) libraries written in LabVIEW will be provided to the remote developers. These VIs will be replaced later, in the data acquisition system, by their homologous VIs that actually interface with the hardware. This facility will allow remote researchers to verify the correct behavior of their own data processing algorithms before downloading them into the data acquisition system

Optimizing Chromatographic Separation: An Experiment Using an HPLC Simulator

Science.gov (United States)

Shalliker, R. A.; Kayillo, S.; Dennis, G. R.

2008-01-01

Optimization of a chromatographic separation within the time constraints of a laboratory session is practically impossible. However, by employing a HPLC simulator, experiments can be designed that allow students to develop an appreciation of the complexities involved in optimization procedures. In the present exercise, a HPLC simulator from "JCE…

Pore-scale and Continuum Simulations of Solute Transport Micromodel Benchmark Experiments

Energy Technology Data Exchange (ETDEWEB)

Oostrom, Martinus; Mehmani, Yashar; Romero Gomez, Pedro DJ; Tang, Y.; Liu, H.; Yoon, Hongkyu; Kang, Qinjun; Joekar Niasar, Vahid; Balhoff, Matthew; Dewers, T.; Tartakovsky, Guzel D.; Leist, Emily AE; Hess, Nancy J.; Perkins, William A.; Rakowski, Cynthia L.; Richmond, Marshall C.; Serkowski, John A.; Werth, Charles J.; Valocchi, Albert J.; Wietsma, Thomas W.; Zhang, Changyong

2016-08-01

Four sets of micromodel nonreactive solute transport experiments were conducted with flow velocity, grain diameter, pore-aspect ratio, and flow focusing heterogeneity as the variables. The data sets were offered to pore-scale modeling groups to test their simulators. Each set consisted of two learning experiments, for which all results was made available, and a challenge experiment, for which only the experimental description and base input parameters were provided. The experimental results showed a nonlinear dependence of the dispersion coefficient on the Peclet number, a negligible effect of the pore-aspect ratio on transverse mixing, and considerably enhanced mixing due to flow focusing. Five pore-scale models and one continuum-scale model were used to simulate the experiments. Of the pore-scale models, two used a pore-network (PN) method, two others are based on a lattice-Boltzmann (LB) approach, and one employed a computational fluid dynamics (CFD) technique. The learning experiments were used by the PN models to modify the standard perfect mixing approach in pore bodies into approaches to simulate the observed incomplete mixing. The LB and CFD models used these experiments to appropriately discretize the grid representations. The continuum model use published non-linear relations between transverse dispersion coefficients and Peclet numbers to compute the required dispersivity input values. Comparisons between experimental and numerical results for the four challenge experiments show that all pore-scale models were all able to satisfactorily simulate the experiments. The continuum model underestimated the required dispersivity values and, resulting in less dispersion. The PN models were able to complete the simulations in a few minutes, whereas the direct models needed up to several days on supercomputers to resolve the more complex problems.

Experiences using multigrid for geothermal simulation

Energy Technology Data Exchange (ETDEWEB)

Bullivant, D.P.; O`Sullivan, M.J. [Univ. of Auckland (New Zealand); Yang, Z. [Univ. of New South Wales (Australia)

1995-03-01

Experiences of applying multigrid to the calculation of natural states for geothermal simulations are discussed. The modelling of natural states was chosen for this study because they can take a long time to compute and the computation is often dominated by the development of phase change boundaries that take up a small region in the simulation. For the first part of this work a modified version of TOUGH was used for 2-D vertical problems. A {open_quotes}test-bed{close_quotes} program is now being used to investigate some of the problems encountered with implementing multigrid. This is ongoing work. To date, there have been some encouraging but not startling results.

Mochovce NPP experience in the certification and the use of full scope simulator

International Nuclear Information System (INIS)

Krenicky, L.

1999-01-01

The paper presents some of the Mochovce NPP experience in the full-scope simulator certification process, simulator training programs development, implementation and evaluation, the use of simulator in the all-plant emergency exercises as well as the experience in validation of plant operational procedures.(author)

First experiences of high-fidelity simulation training in junior nursing students in Korea.

Science.gov (United States)

Lee, Suk Jeong; Kim, Sang Suk; Park, Young-Mi

2015-07-01

This study was conducted to explore first experiences of high-fidelity simulation training in Korean nursing students, in order to develop and establish more effective guidelines for future simulation training in Korea. Thirty-three junior nursing students participated in high-fidelity simulation training for the first time. Using both qualitative and quantitative methods, data were collected from reflective journals and questionnaires of simulation effectiveness after simulation training. Descriptive statistics were used to analyze simulation effectiveness and content analysis was performed with the reflective journal data. Five dimensions and 31 domains, both positive and negative experiences, emerged from qualitative analysis: (i) machine-human interaction in a safe environment; (ii) perceived learning capability; (iii) observational learning; (iv) reconciling practice with theory; and (v) follow-up debriefing effect. More than 70% of students scored high on increased ability to identify changes in the patient's condition, critical thinking, decision-making, effectiveness of peer observation, and debriefing in effectiveness of simulation. This study reported both positive and negative experiences of simulation. The results of this study could be used to set the level of task difficulty in simulation. Future simulation programs can be designed by reinforcing the positive experiences and modifying the negative results. © 2014 The Authors. Japan Journal of Nursing Science © 2014 Japan Academy of Nursing Science.

Simulation Experiment Description Markup Language (SED-ML) Level 1 Version 2.

Science.gov (United States)

Bergmann, Frank T; Cooper, Jonathan; Le Novère, Nicolas; Nickerson, David; Waltemath, Dagmar

2015-09-04

The number, size and complexity of computational models of biological systems are growing at an ever increasing pace. It is imperative to build on existing studies by reusing and adapting existing models and parts thereof. The description of the structure of models is not sufficient to enable the reproduction of simulation results. One also needs to describe the procedures the models are subjected to, as recommended by the Minimum Information About a Simulation Experiment (MIASE) guidelines. This document presents Level 1 Version 2 of the Simulation Experiment Description Markup Language (SED-ML), a computer-readable format for encoding simulation and analysis experiments to apply to computational models. SED-ML files are encoded in the Extensible Markup Language (XML) and can be used in conjunction with any XML-based model encoding format, such as CellML or SBML. A SED-ML file includes details of which models to use, how to modify them prior to executing a simulation, which simulation and analysis procedures to apply, which results to extract and how to present them. Level 1 Version 2 extends the format by allowing the encoding of repeated and chained procedures.

A Stigmergy Collaboration Approach in the Open Source Software Developer Community

Energy Technology Data Exchange (ETDEWEB)

Cui, Xiaohui [ORNL; Pullum, Laura L [ORNL; Treadwell, Jim N [ORNL; Potok, Thomas E [ORNL

2009-01-01

The communication model of some self-organized online communities is significantly different from the traditional social network based community. It is problematic to use social network analysis to analyze the collaboration structure and emergent behaviors in these communities because these communities lack peer-to-peer connections. Stigmergy theory provides an explanation of the collaboration model of these communities. In this research, we present a stigmergy approach for building an agent-based simulation to simulate the collaboration model in the open source software (OSS) developer community. We used a group of actors who collaborate on OSS projects through forums as our frame of reference and investigated how the choices actors make in contributing their work on the projects determines the global status of the whole OSS project. In our simulation, the forum posts serve as the digital pheromone and the modified Pierre-Paul Grasse pheromone model is used for computing the developer agents behavior selection probability.

HFSS Simulation on Cavity Coupling for Axion Detecting Experiment

CERN Document Server

Yeo, Beomki

2015-01-01

In the resonant cavity experiment, it is vital maximize signal power at detector with the minimized reflection from source. Return loss is minimized when the impedance of source and cavity are matched to each other and this is called impedance matching. Establishing tunable antenna on source is required to get a impedance matching. Geometry and position of antenna is varied depending on the electromagnetic eld of cavity. This research is dedicated to simulation to nd such a proper design of coupling antenna, especially for axion dark matter detecting experiment. HFSS solver was used for the simulation.

Simulation of complete neutron scattering experiments: from model systems to liquid germanium

International Nuclear Information System (INIS)

Hugouvieux, V.

2004-11-01

In this thesis, both theoretical and experimental studies of liquids are done. Neutron scattering enables structural and dynamical properties of liquids to be investigated. On the theoretical side, molecular dynamics simulations are of great interest since they give positions and velocities of the atoms and the forces acting on each of them. They also enable spatial and temporal correlations to be computed and these quantities are also available from neutron scattering experiments. Consequently, the comparison can be made between results from molecular dynamics simulations and from neutron scattering experiments, in order to improve our understanding of the structure and dynamics of liquids. However, since extracting reliable data from a neutron scattering experiment is difficult, we propose to simulate the experiment as a whole, including both instrument and sample, in order to gain understanding and to evaluate the impact of the different parasitic contributions (absorption, multiple scattering associated with elastic and inelastic scattering, instrument resolution). This approach, in which the sample is described by its structure and dynamics as computed from molecular dynamics simulations, is presented and tested on isotropic model systems. Then liquid germanium is investigated by inelastic neutron scattering and both classical and ab initio molecular dynamics simulations. This enables us to simulate the experiment we performed and to evaluate the influence of the contributions from the instrument and from the sample on the detected signal. (author)

Multi-Objective Design Of Optimal Greenhouse Gas Observation Networks

Science.gov (United States)

Lucas, D. D.; Bergmann, D. J.; Cameron-Smith, P. J.; Gard, E.; Guilderson, T. P.; Rotman, D.; Stolaroff, J. K.

2010-12-01

One of the primary scientific functions of a Greenhouse Gas Information System (GHGIS) is to infer GHG source emission rates and their uncertainties by combining measurements from an observational network with atmospheric transport modeling. Certain features of the observational networks that serve as inputs to a GHGIS --for example, sampling location and frequency-- can greatly impact the accuracy of the retrieved GHG emissions. Observation System Simulation Experiments (OSSEs) provide a framework to characterize emission uncertainties associated with a given network configuration. By minimizing these uncertainties, OSSEs can be used to determine optimal sampling strategies. Designing a real-world GHGIS observing network, however, will involve multiple, conflicting objectives; there will be trade-offs between sampling density, coverage and measurement costs. To address these issues, we have added multi-objective optimization capabilities to OSSEs. We demonstrate these capabilities by quantifying the trade-offs between retrieval error and measurement costs for a prototype GHGIS, and deriving GHG observing networks that are Pareto optimal. [LLNL-ABS-452333: This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Simulating the Long-Distance Propagation of Intense Beams in the Paul Trap Simulator Experiment

CERN Document Server

Gilson, Erik P; Davidson, Ronald C; Efthimion, Philip; Majeski, Richard; Startsev, Edward

2005-01-01

The Paul Trap Simulator Experiment (PTSX) makes use of a compact Paul trap configuration with quadrupolar oscillating wall voltages to simulate the propagation of intense charged particle beams over distances of many kilometers through magnetic alternating-gradient transport systems. The simulation is possible because of the similarity between the transverse dynamics of particles in the two systems. One-component pure cesium ion plasmas have been trapped that correspond to normalized intensity parameters s < 0.8, where s is the ratio of the square of the plasma frequency to twice the square of the average transverse focusing frequency. The PTSX device confines the plasma for hundreds of milliseconds, which is equivalent to beam propagation over tens of kilometers. Results are presented for experiments in which the amplitude of the oscillating confining voltage waveform has been modified as a function of time. A comparison is made between abrupt changes in amplitude and adiabatic changes in amplitude. T...

Simulation of the Impact of New Aircraft- and Satellite-Based Ocean Surface Wind Measurements on H*Wind Analyses and Numerical Forecasts

Science.gov (United States)

Miller, Timothy; Atlas, Robert; Black, Peter; Chen, Shuyi; Hood, Robbie; Johnson, James; Jones, Linwood; Ruf, Chris; Uhlhorn, Eric; Krishnamurti, T. N.;

Simulation Experiment Description Markup Language (SED-ML Level 1 Version 3 (L1V3

Directory of Open Access Journals (Sweden)

Bergmann Frank T.

2018-03-01

Full Text Available The creation of computational simulation experiments to inform modern biological research poses challenges to reproduce, annotate, archive, and share such experiments. Efforts such as SBML or CellML standardize the formal representation of computational models in various areas of biology. The Simulation Experiment Description Markup Language (SED-ML describes what procedures the models are subjected to, and the details of those procedures. These standards, together with further COMBINE standards, describe models sufficiently well for the reproduction of simulation studies among users and software tools. The Simulation Experiment Description Markup Language (SED-ML is an XML-based format that encodes, for a given simulation experiment, (i which models to use; (ii which modifications to apply to models before simulation; (iii which simulation procedures to run on each model; (iv how to post-process the data; and (v how these results should be plotted and reported. SED-ML Level 1 Version 1 (L1V1 implemented support for the encoding of basic time course simulations. SED-ML L1V2 added support for more complex types of simulations, specifically repeated tasks and chained simulation procedures. SED-ML L1V3 extends L1V2 by means to describe which datasets and subsets thereof to use within a simulation experiment.

Simulation Experiment Description Markup Language (SED-ML) Level 1 Version 3 (L1V3).

Science.gov (United States)

Bergmann, Frank T; Cooper, Jonathan; König, Matthias; Moraru, Ion; Nickerson, David; Le Novère, Nicolas; Olivier, Brett G; Sahle, Sven; Smith, Lucian; Waltemath, Dagmar

2018-03-19

The creation of computational simulation experiments to inform modern biological research poses challenges to reproduce, annotate, archive, and share such experiments. Efforts such as SBML or CellML standardize the formal representation of computational models in various areas of biology. The Simulation Experiment Description Markup Language (SED-ML) describes what procedures the models are subjected to, and the details of those procedures. These standards, together with further COMBINE standards, describe models sufficiently well for the reproduction of simulation studies among users and software tools. The Simulation Experiment Description Markup Language (SED-ML) is an XML-based format that encodes, for a given simulation experiment, (i) which models to use; (ii) which modifications to apply to models before simulation; (iii) which simulation procedures to run on each model; (iv) how to post-process the data; and (v) how these results should be plotted and reported. SED-ML Level 1 Version 1 (L1V1) implemented support for the encoding of basic time course simulations. SED-ML L1V2 added support for more complex types of simulations, specifically repeated tasks and chained simulation procedures. SED-ML L1V3 extends L1V2 by means to describe which datasets and subsets thereof to use within a simulation experiment.

Task leaders reports

International Nuclear Information System (INIS)

Loriaux, E.F.; Jehee, J.N.T.

1995-01-01

Report on CRP-OSS Task 4.1.1. ''Survey of existing documentation relevant to this programme's goals'' and report on CRP-OSS Task 4.1.2. ''Survey of existing Operator Support Systems and the experience with them'' are presented. 2 tabs

Virtual experiments: the ultimate aim of neutron ray-tracing simulations

DEFF Research Database (Denmark)

Lefmann, Kim; Willendrup, Peter Kjær; Udby, Linda

2008-01-01

We define a virtual neutron experiment as a complete simulation of an experiment, from source over sample to detector. The virtual experiment (VE) will ideally interface with the instrument control software for the input and with standard data analysis packages for the virtual data output. Virtual...

Simulation of long-distance beam propagation in the Paul trap simulator experiment

International Nuclear Information System (INIS)

Gilson, Erik P.; Chung, Moses; Davidson, Ronald C.; Efthimion, Philip C.; Majeski, Richard; Startsev, Edward A.

2005-01-01

The Paul Trap Simulator Experiment (PTSX) simulates the propagation of intense charged particle beams over distances of many kilometers through magnetic alternating-gradient (AG) transport systems by making use of the similarity between the transverse dynamics of particles in the two systems. One-component pure ion plasmas have been trapped that correspond to normalized intensity parameter s-coret=ω p 2 (0)/2ω q 2 = p (r) is the plasma frequency and ω q is the average transverse focusing frequency in the smooth-focusing approximation. The PTSX device confines one-component cesium ion plasmas for hundreds of milliseconds, which is equivalent to beam propagation over 10km. Results are presented for experiments in which the amplitude of the confining voltage waveform has been modified as a function of time. Recent modifications to the device are described, and both the change from a cesium ion source to a barium ion source, and the development of a laser-induced fluorescence diagnostic system are discussed

Optimising electron microscopy experiment through electron optics simulation

Energy Technology Data Exchange (ETDEWEB)

Kubo, Y. [CEMES-CNRS, 29 Rue Jeanne Marvig, 31055 Toulouse France (France); Hitachi High-Technologies Corporation, 882, Ichige, Hitachinaka, Ibaraki 312-8504 (Japan); Gatel, C.; Snoeck, E. [CEMES-CNRS, 29 Rue Jeanne Marvig, 31055 Toulouse France (France); Houdellier, F., E-mail: florent.houdellier@cemes.fr [CEMES-CNRS, 29 Rue Jeanne Marvig, 31055 Toulouse France (France)

2017-04-15

We developed a new type of electron trajectories simulation inside a complete model of a modern transmission electron microscope (TEM). Our model incorporates the precise and real design of each element constituting a TEM, i.e. the field emission (FE) cathode, the extraction optic and acceleration stages of a 300 kV cold field emission gun, the illumination lenses, the objective lens, the intermediate and projection lenses. Full trajectories can be computed using magnetically saturated or non-saturated round lenses, magnetic deflectors and even non-cylindrical symmetry elements like electrostatic biprism. This multi-scale model gathers nanometer size components (FE tip) with parts of meter length (illumination and projection systems). We demonstrate that non-trivial TEM experiments requiring specific and complex optical configurations can be simulated and optimized prior to any experiment using such model. We show that all the currents set in all optical elements of the simulated column can be implemented in the real column (I2TEM in CEMES) and used as starting alignment for the requested experiment. We argue that the combination of such complete electron trajectory simulations in the whole TEM column with automatic optimization of the microscope parameters for optimal experimental data (images, diffraction, spectra) allows drastically simplifying the implementation of complex experiments in TEM and will facilitate the development of advanced use of the electron microscope in the near future. - Highlights: • Using dedicated electron optics software, we calculate full electrons trajectories inside a modern transmission electron microscope. • We have determined how to deal with multi-scale electron optics elements like high voltage cold field emission source. • W • e have succeed to model both weak and strong magnetic lenses whether in saturated or unsaturated conditions as well as electrostatic biprism and magnetic deflectors. • We have applied this model

Optimising electron microscopy experiment through electron optics simulation

International Nuclear Information System (INIS)

Kubo, Y.; Gatel, C.; Snoeck, E.; Houdellier, F.

2017-01-01

We developed a new type of electron trajectories simulation inside a complete model of a modern transmission electron microscope (TEM). Our model incorporates the precise and real design of each element constituting a TEM, i.e. the field emission (FE) cathode, the extraction optic and acceleration stages of a 300 kV cold field emission gun, the illumination lenses, the objective lens, the intermediate and projection lenses. Full trajectories can be computed using magnetically saturated or non-saturated round lenses, magnetic deflectors and even non-cylindrical symmetry elements like electrostatic biprism. This multi-scale model gathers nanometer size components (FE tip) with parts of meter length (illumination and projection systems). We demonstrate that non-trivial TEM experiments requiring specific and complex optical configurations can be simulated and optimized prior to any experiment using such model. We show that all the currents set in all optical elements of the simulated column can be implemented in the real column (I2TEM in CEMES) and used as starting alignment for the requested experiment. We argue that the combination of such complete electron trajectory simulations in the whole TEM column with automatic optimization of the microscope parameters for optimal experimental data (images, diffraction, spectra) allows drastically simplifying the implementation of complex experiments in TEM and will facilitate the development of advanced use of the electron microscope in the near future. - Highlights: • Using dedicated electron optics software, we calculate full electrons trajectories inside a modern transmission electron microscope. • We have determined how to deal with multi-scale electron optics elements like high voltage cold field emission source. • W • e have succeed to model both weak and strong magnetic lenses whether in saturated or unsaturated conditions as well as electrostatic biprism and magnetic deflectors. • We have applied this model

Computer simulation of Wheeler's delayed-choice experiment with photons

NARCIS (Netherlands)

Zhao, S.; Yuan, S.; De Raedt, H.; Michielsen, K.

We present a computer simulation model of Wheeler's delayed-choice experiment that is a one-to-one copy of an experiment reported recently (Jacques V. et al., Science, 315 (2007) 966). The model is solely based on experimental facts, satisfies Einstein's criterion of local causality and does not

Design of wave breaking experiments and A-Posteriori Simulations

NARCIS (Netherlands)

Kurnia, R.; Kurnia, Ruddy; van Groesen, Embrecht W.C.

2014-01-01

This report presents results of 30 wave breaking experiments conducted in the long wave tank of TU Delft, Department of Maritime and Transport Technology (6,7 and 10-12 March 2014), together with simulations performed before the experiment to determine the required wave maker motion and a-posteriori

Design of wave breaking experiments and A-Posteriori Simulations

NARCIS (Netherlands)

Kurnia, Ruddy; van Groesen, Embrecht W.C.

This report presents results of 30 wave breaking experiments conducted in the long wave tank of TU Delft, Department of Maritime and Transport Technology (6,7 and 10-12 March 2014), together with simulations performed before the experiment to determine the required wave maker motion and a-posteriori

Simulation of COMEDIE Fission Product Plateout Experiment Using GAMMA-FP

International Nuclear Information System (INIS)

Tak, Nam-il; Yoon, Churl

2014-01-01

FThis phenomenon is particularly important under a VHTR design with vented low pressure confinement (VLPC), because the vent allows the prompt release of fission products accumulated within the primary circuit to environment during an initial blow-down phase after pipe break accidents. In order to analyze the fission product plateout, an numerical model was developed by Yoo et al. and incorporated into the GAMMA-FP code in the past. The GAMMA-FP model was validated against two experiment data, i.e., VAMPYR-1 and OGL, during the development phase. One of the well-known experiments for fission product plateout is the COMEDIE experiment. In this work, the COMEDIE experiment has been simulated using the GAMMA-FP code to investigate the reliability and applicability of the plateout model of GAMMA-FP. The COMEDIE experiment for fission product plateout was simulated using the GAMMA-FP code in this work. A good agreement was achieved between the measured and predicted plateout activities. The existing solution scheme was modified to allow larger time step size for fission product analysis in order to speed-up the computational time. Nevertheless, the modification of the existing numerical model of GAMMA-FP is necessary when a simulation capability of a long duration of plateout period (e.g., 60 years) is targeted

Utilization of the Nursing Process to Foster Clinical Reasoning During a Simulation Experience

Directory of Open Access Journals (Sweden)

Amanda Lambie

2015-11-01

Full Text Available Nursing practice includes complex reasoning and multifaceted decision making with minimal standardized guidance in how to evaluate this phenomenon among nursing students. Learning outcomes related to the clinical reasoning process among novice baccalaureate nursing students during a simulation experience were evaluated. Nursing process records were utilized to evaluate and foster the development of clinical reasoning in a high-fidelity medical-surgical simulation experience. Students were unable to describe and process pertinent patient information appropriately prior to the simulation experience. Students’ ability to identify pertinent patient cues and plan appropriate patient care improved following the simulation. The learning activity afforded a structured opportunity to identify cues, prioritize the proper course of nursing interventions, and engage in collaboration among peers. The simulation experience provides faculty insight into the students’ clinical reasoning processes, while providing students with a clear framework for successfully accomplishing learning outcomes.

Event-by-event simulation of Einstein-Podolsky-Rosen-Bohm experiments

NARCIS (Netherlands)

Zhao, Shuang; De Raedt, Hans; Michielsen, Kristel

We construct an event-based computer simulation model of the Einstein-Podolsky-Rosen-Bohm experiments with photons. The algorithm is a one-to-one copy of the data gathering and analysis procedures used in real laboratory experiments. We consider two types of experiments, those with a source emitting

Simulation of the Phebus FPT1 experiment

International Nuclear Information System (INIS)

Amador G, R.; Nunez C, A.; Angel M, E. Del

2003-01-01

The present work describes the pattern of the denominated installation Phebus developed and used by the National Commission of Nuclear Security and Safeguards for their participation in the International Standard Problem ISP-46, organized by the Nuclear Energy Agency (NEA). The exercise consisted on the simulation of the denominated experiment Phebus FPT1 carried out in the experimental installation Phebus located in the Institut de Protection et de Surete Nucleaire of France. The experiment Phebus FP1 had as objective to evaluate the capacity of different computer codes to model in integral form the physical processes that are carried out during a severe accident in a pressurized water reactor (PWR), from the degradation of the core until the late stage with the formation of a pool of fused material, hydrogen production, liberation and transport of fission products, phenomena in the contention and chemistry of the iodine. The CNSNS uses the version bi of the SCDAPSIM code developed by the company Innovative Software Systems to simulate the International Standard Problem 46. The obtained results showed that the code is able to predict the thermohydraulic part of the experiment, however the same thing doesn't happen to the parameters related with the one fused of the fuel. (Author)

Comparing CTH simulations and experiments on explosively loaded rings

Science.gov (United States)

Braithwaite, C. H.; Aydelotte, Brady; Collins, Adam; Thadhani, Naresh; Williamson, David Martin

2012-03-01

A series of experiments were conducted on explosively loaded metallic rings for the purpose of studying fragmentation. In addition to the collection of fragments for analysis, the radial velocity of the expanding ring was measured with photon Doppler velocimetry (PDV) and the arrangement was imaged using high speed photography. Both the ring material and the material used as the explosive container were altered and the results compared with simulations performed in CTH. Good agreement was found between the simulations and the experiments. The maximum radial velocity attained was approximately 380 m/s, which was achieved through loading with a 5g PETN based charge.

Experiences with linear solvers for oil reservoir simulation problems

Energy Technology Data Exchange (ETDEWEB)

Joubert, W.; Janardhan, R. [Los Alamos National Lab., NM (United States); Biswas, D.; Carey, G.

1996-12-31

This talk will focus on practical experiences with iterative linear solver algorithms used in conjunction with Amoco Production Company`s Falcon oil reservoir simulation code. The goal of this study is to determine the best linear solver algorithms for these types of problems. The results of numerical experiments will be presented.

Nature Run for the North Atlantic Ocean Hurricane Region: System Evaluation and Regional Applications

Science.gov (United States)

Kourafalou, V.; Androulidakis, I.; Halliwell, G. R., Jr.; Kang, H.; Mehari, M. F.; Atlas, R. M.

2016-02-01

A prototype ocean Observing System Simulation Experiments (OSSE) system, first developed and data validated in the Gulf of Mexico, has been applied on the extended North Atlantic Ocean hurricane region. The main objectives of this study are: a) to contribute toward a fully relocatable ocean OSSE system by expanding the Gulf of Mexico OSSE to the North Atlantic Ocean; b) demonstrate and quantify improvements in hurricane forecasting when the ocean component of coupled hurricane models is advanced through targeted observations and assimilation. The system is based on the Hybrid Coordinate Ocean Model (HYCOM) and has been applied on a 1/250 Mercator mesh for the free-running Nature Run (NR) and on a 1/120 Mercator mesh for the data assimilative forecast model (FM). A "fraternal twin" system is employed, using two different realizations for NR and FM, each configured to produce substantially different physics and truncation errors. The NR has been evaluated using a variety of available observations, such as from AVISO, GDEM climatology and GHRSST observations, plus specific regional products (upper ocean profiles from air-borne instruments, surface velocity maps derived from the historical drifter data set and tropical cyclone heat potential maps derived from altimetry observations). The utility of the OSSE system to advance the knowledge of regional air-sea interaction processes related to hurricane activity is demonstrated in the Amazon region (salinity induced surface barrier layer) and the Gulf Stream region (hurricane impact on the Gulf Stream extension).

Simulated learning environment experience in nursing students for paediatric practice.

Science.gov (United States)

Mendoza-Maldonado, Yessy; Barría-Pailaquilén, René Mauricio

The training of health professionals requires the acquisition of clinical skills in a safe and efficient manner, which is facilitated by a simulated learning environment (SLE). It is also an efficient alternative when there are limitations for clinical practice in certain areas. This paper shows the work undertaken in a Chilean university in implementing paediatric practice using SLE. Over eight days, the care experience of a hospitalized infant was studied applying the nursing process. The participation of a paediatrician, resident physician, nursing technician, and simulated user was included in addition to the use of a simulation mannequin and equipment. Simulation of care was integral and covered interaction with the child and family and was developed in groups of six students by a teacher. The different phases of the simulation methodology were developed from a pedagogical point of view. The possibility of implementing paediatric clinical practice in an efficient and safe way was confirmed. The experience in SLE was highly valued by the students, allowing them to develop different skills and abilities required for paediatric nursing through simulation. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.

Event-by-event simulation of a quantum delayed-choice experiment

NARCIS (Netherlands)

Donker, Hylke C.; De Raedt, Hans; Michielsen, Kristel

2014-01-01

The quantum delayed-choice experiment of Tang et al. (2012) is simulated on the level of individual events without making reference to concepts of quantum theory or without solving a wave equation. The simulation results are in excellent agreement with the quantum theoretical predictions of this

Rationalization of foundry processes on the basis of simulation experiment

Directory of Open Access Journals (Sweden)

S. Kukla

2008-10-01

Full Text Available The paper presents results of research obtained on the basis of simulation experiment, whose aim was to analyze the performance of cast iron foundry. A simulation model of automobile industry foundry was made. The course of the following processes was analyzedin a computer model: preparation of liquid cast iron, forming and filling the moulds, cooling and stamping the castings, cleaning andfinishing treatment. The sheets of multi-criterion evaluation were prepared, where criteria and variants were assessed by meansof subjective point evaluation and fuzzy character evaluation. The paper presents an analysis example of finishing activities of castings realized in foundry on traditional machines and efficient presses and in cooperation. On the basis of reports from a simulation experiment information was achieved related to activities’ duration, load of accessible resources, the problems of storage and transport, bottle necks in the system and appearing queues in from of workplaces. The research used a universal modelling and simulation packet for productionsystems - ARENA.

A trigger simulation framework for the ALICE experiment

International Nuclear Information System (INIS)

Antinori, F; Carminati, F; Gheata, A; Gheata, M

2011-01-01

A realistic simulation of the trigger system in a complex HEP experiment is essential for performing detailed trigger efficiency studies. The ALICE trigger simulation is evolving towards a framework capable of replaying the full trigger chain starting from the input to the individual trigger processors and ending with the decision mechanisms of the ALICE central trigger processor. This paper describes the new ALICE trigger simulation framework that is being tested and deployed. The framework handles details like trigger levels, signal delays and busy signals, implementing the trigger logic via customizable trigger device objects managed by a robust scheduling mechanism. A big advantage is the high flexibility of the framework, which is able to mix together components described with very different levels of detail. The framework is being gradually integrated within the ALICE simulation and reconstruction frameworks.

Three-dimensional simulations of Nova capsule implosion experiments

International Nuclear Information System (INIS)

Marinak, M.M.; Tipton, R.E.; Landen, O.L.

1995-01-01

Capsule implosion experiments carried out on the Nova laser are simulated with the three-dimensional HYDRA radiation hydrodynamics code. Simulations of ordered near single mode perturbations indicate that structures which evolve into round spikes can penetrate farthest into the hot spot. Bubble-shaped perturbations can burn through the capsule shell fastest, however, causing even more damage. Simulations of a capsule with multimode perturbations shows spike amplitudes evolving in good agreement with a saturation model during the deceleration phase. The presence of sizable low mode asymmetry, caused either by drive asymmetry or perturbations in the capsule shell, can dramatically affect the manner in which spikes approach the center of the hot spot. Three-dimensional coupling between the low mode shell perturbations intrinsic to Nova capsules and the drive asymmetry brings the simulated yields into closer agreement with the experimental values

Virtual Reality Simulation of the International Space Welding Experiment

Science.gov (United States)

Phillips, James A.

1996-01-01

Virtual Reality (VR) is a set of breakthrough technologies that allow a human being to enter and fully experience a 3-dimensional, computer simulated environment. A true virtual reality experience meets three criteria: (1) It involves 3-dimensional computer graphics; (2) It includes real-time feedback and response to user actions; and (3) It must provide a sense of immersion. Good examples of a virtual reality simulator are the flight simulators used by all branches of the military to train pilots for combat in high performance jet fighters. The fidelity of such simulators is extremely high -- but so is the price tag, typically millions of dollars. Virtual reality teaching and training methods are manifestly effective, and we have therefore implemented a VR trainer for the International Space Welding Experiment. My role in the development of the ISWE trainer consisted of the following: (1) created texture-mapped models of the ISWE's rotating sample drum, technology block, tool stowage assembly, sliding foot restraint, and control panel; (2) developed C code for control panel button selection and rotation of the sample drum; (3) In collaboration with Tim Clark (Antares Virtual Reality Systems), developed a serial interface box for the PC and the SGI Indigo so that external control devices, similar to ones actually used on the ISWE, could be used to control virtual objects in the ISWE simulation; (4) In collaboration with Peter Wang (SFFP) and Mark Blasingame (Boeing), established the interference characteristics of the VIM 1000 head-mounted-display and tested software filters to correct the problem; (5) In collaboration with Peter Wang and Mark Blasingame, established software and procedures for interfacing the VPL DataGlove and the Polhemus 6DOF position sensors to the SGI Indigo serial ports. The majority of the ISWE modeling effort was conducted on a PC-based VR Workstation, described below.

Voxel-based Monte Carlo simulation of X-ray imaging and spectroscopy experiments

International Nuclear Information System (INIS)

Bottigli, U.; Brunetti, A.; Golosio, B.; Oliva, P.; Stumbo, S.; Vincze, L.; Randaccio, P.; Bleuet, P.; Simionovici, A.; Somogyi, A.

2004-01-01

A Monte Carlo code for the simulation of X-ray imaging and spectroscopy experiments in heterogeneous samples is presented. The energy spectrum, polarization and profile of the incident beam can be defined so that X-ray tube systems as well as synchrotron sources can be simulated. The sample is modeled as a 3D regular grid. The chemical composition and density is given at each point of the grid. Photoelectric absorption, fluorescent emission, elastic and inelastic scattering are included in the simulation. The core of the simulation is a fast routine for the calculation of the path lengths of the photon trajectory intersections with the grid voxels. The voxel representation is particularly useful for samples that cannot be well described by a small set of polyhedra. This is the case of most naturally occurring samples. In such cases, voxel-based simulations are much less expensive in terms of computational cost than simulations on a polygonal representation. The efficient scheme used for calculating the path lengths in the voxels and the use of variance reduction techniques make the code suitable for the detailed simulation of complex experiments on generic samples in a relatively short time. Examples of applications to X-ray imaging and spectroscopy experiments are discussed

Voxel-based Monte Carlo simulation of X-ray imaging and spectroscopy experiments

Energy Technology Data Exchange (ETDEWEB)

Bottigli, U. [Istituto di Matematica e Fisica dell' Universita di Sassari, via Vienna 2, 07100, Sassari (Italy); Sezione INFN di Cagliari (Italy); Brunetti, A. [Istituto di Matematica e Fisica dell' Universita di Sassari, via Vienna 2, 07100, Sassari (Italy); Golosio, B. [Istituto di Matematica e Fisica dell' Universita di Sassari, via Vienna 2, 07100, Sassari (Italy) and Sezione INFN di Cagliari (Italy)]. E-mail: golosio@uniss.it; Oliva, P. [Istituto di Matematica e Fisica dell' Universita di Sassari, via Vienna 2, 07100, Sassari (Italy); Stumbo, S. [Istituto di Matematica e Fisica dell' Universita di Sassari, via Vienna 2, 07100, Sassari (Italy); Vincze, L. [Department of Chemistry, University of Antwerp (Belgium); Randaccio, P. [Dipartimento di Fisica dell' Universita di Cagliari and Sezione INFN di Cagliari (Italy); Bleuet, P. [European Synchrotron Radiation Facility, Grenoble (France); Simionovici, A. [European Synchrotron Radiation Facility, Grenoble (France); Somogyi, A. [European Synchrotron Radiation Facility, Grenoble (France)

2004-10-08

A Monte Carlo code for the simulation of X-ray imaging and spectroscopy experiments in heterogeneous samples is presented. The energy spectrum, polarization and profile of the incident beam can be defined so that X-ray tube systems as well as synchrotron sources can be simulated. The sample is modeled as a 3D regular grid. The chemical composition and density is given at each point of the grid. Photoelectric absorption, fluorescent emission, elastic and inelastic scattering are included in the simulation. The core of the simulation is a fast routine for the calculation of the path lengths of the photon trajectory intersections with the grid voxels. The voxel representation is particularly useful for samples that cannot be well described by a small set of polyhedra. This is the case of most naturally occurring samples. In such cases, voxel-based simulations are much less expensive in terms of computational cost than simulations on a polygonal representation. The efficient scheme used for calculating the path lengths in the voxels and the use of variance reduction techniques make the code suitable for the detailed simulation of complex experiments on generic samples in a relatively short time. Examples of applications to X-ray imaging and spectroscopy experiments are discussed.

Processing biobased polymers using plasticizers: Numerical simulations versus experiments

Science.gov (United States)

Desplentere, Frederik; Cardon, Ludwig; Six, Wim; Erkoç, Mustafa

2016-03-01

In polymer processing, the use of biobased products shows lots of possibilities. Considering biobased materials, biodegradability is in most cases the most important issue. Next to this, bio based materials aimed at durable applications, are gaining interest. Within this research, the influence of plasticizers on the processing of the bio based material is investigated. This work is done for an extrusion grade of PLA, Natureworks PLA 2003D. Extrusion through a slit die equipped with pressure sensors is used to compare the experimental pressure values to numerical simulation results. Additional experimental data (temperature and pressure data along the extrusion screw and die are recorded) is generated on a dr. Collin Lab extruder producing a 25mm diameter tube. All these experimental data is used to indicate the appropriate functioning of the numerical simulation tool Virtual Extrusion Laboratory 6.7 for the simulation of both the industrial available extrusion grade PLA and the compound in which 15% of plasticizer is added. Adding the applied plasticizer, resulted in a 40% lower pressure drop over the extrusion die. The combination of different experiments allowed to fit the numerical simulation results closely to the experimental values. Based on this experience, it is shown that numerical simulations also can be used for modified bio based materials if appropriate material and process data are taken into account.

Simulation of sodium boiling experiments with THERMIT sodium version

International Nuclear Information System (INIS)

Huh, K.Y.

1982-05-01

Natural and forced convection experiments (SBTF and French) are simulated with the sodium version of the thermal-hydraulic computer code THERMIT. Simulation is done for the test section with the pressure-velocity boundary condition and subsequently extended to the whole loop. For the test section simulation, a steady-state and transient calculations are performed and compared with experimental data. For the loop simulation, two methods are used, a simulated 1-D loop and an actual 1-D loop. In the simulated 1-D loop analysis, the vapor density is increased by one hundred and two hundred times to avoid the code failure and the results still showed some of the important characteristics of the two-phase flow oscillation in a loop. A mathematical model is suggested for the two-phase flow oscillation. In the actual 1-D loop, only the single phase calculation was performed and turned out to be nearly the same as the simulated 1-D loop single phase results

Stream-simulation experiments for waste-repository investigations

International Nuclear Information System (INIS)

Seitz, M.G.

1980-01-01

The potential for radionuclide migration by groundwater flow from a breached-water repository depends on the leaching process and on chemical changes that might occur as the radionuclide moves away from the repository. Therefore, migration involves the interactions of leached species with (1) the waste and canister, (2) the engineered barrier, and (3) the geologic materials surrounding the repository. Rather than attempt to synthesize each species and study it individually, another approach is to integrate all species and interactions using stream-simulation experiments. Interactions identified in these studies can then be investigated in detail in simpler experiments

Does olfactory specific satiety take place in a natural setting?

Science.gov (United States)

Fernandez, P; Bensafi, M; Rouby, C; Giboreau, A

2013-01-01

Olfactory-specific satiety (OSS) is characterized by a specific decrease in the odor pleasantness of a food eaten to satiety or smelled without ingestion. The usual protocol for studying OSS takes place in laboratory, a setting rather removed from the real world. Here, we set out to examine OSS in a natural setting: during a meal in a restaurant. We hypothesized that an aroma contained in a food that is eaten at the beginning of a meal decreases the pleasantness of the flavor of a food with the same aroma eaten at the end of the meal. In the first experiment (Experiment 1), a test group received an appetizer flavored with a test aroma (anise) at the beginning of the meal. After the main dish, they received a dessert flavored with the same aroma. A control group received the same aromatized dessert, but after a non-aromatized appetizer. This experiment was replicated (Experiment 2) using verbena as the test aroma. For both experiments, results revealed that aroma pleasantness, but not intensity or familiarity, significantly decreased in the test groups vs. the control groups. These findings extend the concept of OSS to a realistic eating context. Copyright © 2012 Elsevier Ltd. All rights reserved.

Simulation of the Impact of New Aircraft- and Satellite-based Ocean Surface Wind Measurements on Estimates of Hurricane Intensity

Science.gov (United States)

Uhlhorn, Eric; Atlas, Robert; Black, Peter; Buckley, Courtney; Chen, Shuyi; El-Nimri, Salem; Hood, Robbie; Johnson, James; Jones, Linwood; Miller, Timothy;

Event-by-event simulation of single-neutron experiments to test uncertainty relations

International Nuclear Information System (INIS)

Raedt, H De; Michielsen, K

2014-01-01

Results from a discrete-event simulation of a recent single-neutron experiment that tests Ozawa's generalization of Heisenberg's uncertainty relation are presented. The event-based simulation algorithm reproduces the results of the quantum theoretical description of the experiment but does not require the knowledge of the solution of a wave equation, nor does it rely on detailed concepts of quantum theory. In particular, the data from these non-quantum simulations satisfy uncertainty relations derived in the context of quantum theory. (paper)

Impact of audio-visual storytelling in simulation learning experiences of undergraduate nursing students.

Science.gov (United States)

Johnston, Sandra; Parker, Christina N; Fox, Amanda

2017-09-01

Use of high fidelity simulation has become increasingly popular in nursing education to the extent that it is now an integral component of most nursing programs. Anecdotal evidence suggests that students have difficulty engaging with simulation manikins due to their unrealistic appearance. Introduction of the manikin as a 'real patient' with the use of an audio-visual narrative may engage students in the simulated learning experience and impact on their learning. A paucity of literature currently exists on the use of audio-visual narratives to enhance simulated learning experiences. This study aimed to determine if viewing an audio-visual narrative during a simulation pre-brief altered undergraduate nursing student perceptions of the learning experience. A quasi-experimental post-test design was utilised. A convenience sample of final year baccalaureate nursing students at a large metropolitan university. Participants completed a modified version of the Student Satisfaction with Simulation Experiences survey. This 12-item questionnaire contained questions relating to the ability to transfer skills learned in simulation to the real clinical world, the realism of the simulation and the overall value of the learning experience. Descriptive statistics were used to summarise demographic information. Two tailed, independent group t-tests were used to determine statistical differences within the categories. Findings indicated that students reported high levels of value, realism and transferability in relation to the viewing of an audio-visual narrative. Statistically significant results (t=2.38, psimulation to clinical practice. The subgroups of age and gender although not significant indicated some interesting results. High satisfaction with simulation was indicated by all students in relation to value and realism. There was a significant finding in relation to transferability on knowledge and this is vital to quality educational outcomes. Copyright © 2017. Published by

Chaos in plasma simulation and experiment

International Nuclear Information System (INIS)

Watts, C.; Sprott, J.C.

1993-09-01

We investigate the possibility that chaos and simple determinism are governing the dynamics of reversed field pinch (RFP) plasmas using data from both numerical simulations and experiment. A large repertoire of nonlinear analysis techniques is used to identify low dimensional chaos. These tools include phase portraits and Poincard sections, correlation dimension, the spectrum of Lyapunov exponents and short term predictability. In addition, nonlinear noise reduction techniques are applied to the experimental data in an attempt to extract any underlying deterministic dynamics. Two model systems are used to simulate the plasma dynamics. These are -the DEBS code, which models global RFP dynamics, and the dissipative trapped electron mode (DTEM) model, which models drift wave turbulence. Data from both simulations show strong indications of low,dimensional chaos and simple determinism. Experimental data were obtained from the Madison Symmetric Torus RFP and consist of a wide array of both global and local diagnostic signals. None of the signals shows any indication of low dimensional chaos or other simple determinism. Moreover, most of the analysis tools indicate the experimental system is very high dimensional with properties similar to noise. Nonlinear noise reduction is unsuccessful at extracting an underlying deterministic system

Chaos in plasma simulation and experiment

Energy Technology Data Exchange (ETDEWEB)

Watts, C. [Texas Univ., Austin, TX (United States). Fusion Research Center; Newman, D.E. [Oak Ridge National Lab., TN (United States); Sprott, J.C. [Wisconsin Univ., Madison, WI (United States). Plasma Physics Research

1993-09-01

We investigate the possibility that chaos and simple determinism are governing the dynamics of reversed field pinch (RFP) plasmas using data from both numerical simulations and experiment. A large repertoire of nonlinear analysis techniques is used to identify low dimensional chaos. These tools include phase portraits and Poincard sections, correlation dimension, the spectrum of Lyapunov exponents and short term predictability. In addition, nonlinear noise reduction techniques are applied to the experimental data in an attempt to extract any underlying deterministic dynamics. Two model systems are used to simulate the plasma dynamics. These are -the DEBS code, which models global RFP dynamics, and the dissipative trapped electron mode (DTEM) model, which models drift wave turbulence. Data from both simulations show strong indications of low,dimensional chaos and simple determinism. Experimental data were obtained from the Madison Symmetric Torus RFP and consist of a wide array of both global and local diagnostic signals. None of the signals shows any indication of low dimensional chaos or other simple determinism. Moreover, most of the analysis tools indicate the experimental system is very high dimensional with properties similar to noise. Nonlinear noise reduction is unsuccessful at extracting an underlying deterministic system.

Paul Trap Simulator Experiment (PTSX) to simulate intense beam propagation through a periodic focusing quadrupole field

International Nuclear Information System (INIS)

Davidson, Ronald C.; Efthimion, Philip C.; Gilson, Erik; Majeski, Richard; Qin, Hong

2002-01-01

The Paul Trap Simulator Experiment (PTSX) is under construction at the Princeton Plasma Physics Laboratory to simulate intense beam propagation through a periodic quadrupole magnetic field. In the Paul trap configuration, a long nonneutral plasma column is confined axially by dc voltages on end cylinders at z=+L and z=-L, and transverse confinement is provided by segmented cylindrical electrodes with applied oscillatory voltages ±V 0 (t) over 90 deg. segments. Because the transverse focusing force is similar in waveform to that produced by a discrete set of periodic quadrupole magnets in a frame moving with the beam, the Paul trap configuration offers the possibility of simulating intense beam propagation in a compact laboratory facility. The experimental layout is described, together with the planned experiments to study beam mismatch, envelope instabilities, halo particle production, and collective wave excitations

Paul Trap Simulator Experiment (PTSX) to simulate intense beam propagation through a periodic focusing quadrupole field

Science.gov (United States)

Davidson, Ronald C.; Efthimion, Philip C.; Gilson, Erik; Majeski, Richard; Qin, Hong

2002-01-01

The Paul Trap Simulator Experiment (PTSX) is under construction at the Princeton Plasma Physics Laboratory to simulate intense beam propagation through a periodic quadrupole magnetic field. In the Paul trap configuration, a long nonneutral plasma column is confined axially by dc voltages on end cylinders at z=+L and z=-L, and transverse confinement is provided by segmented cylindrical electrodes with applied oscillatory voltages ±V0(t) over 90° segments. Because the transverse focusing force is similar in waveform to that produced by a discrete set of periodic quadrupole magnets in a frame moving with the beam, the Paul trap configuration offers the possibility of simulating intense beam propagation in a compact laboratory facility. The experimental layout is described, together with the planned experiments to study beam mismatch, envelope instabilities, halo particle production, and collective wave excitations.

A short introduction to digital simulations in electrochemistry: simulating the Cottrell experiment in NI LabVIEW

Directory of Open Access Journals (Sweden)

Soma Vesztergom

2018-05-01

Full Text Available A brief introduction to the use of digital simulations in electrochemistry is given by a detailed description of the simulation of Cottrell’s experiment in the LabVIEW programming language. A step-by-step approach is followed and different simulation techniques (explicit and implicit Euler, Runge–Kutta and Crank–Nicolson methods are applied. The applied techniques are introduced and discussed on the basis of Padé approximants. The paper might be found useful by undergraduate and graduate students familiarizing themselves with the digital simulation of electrochemical problems, as well as by university lecturers involved with the teaching of theoretical electrochemistry.

Simulated and Virtual Science Laboratory Experiments: Improving Critical Thinking and Higher-Order Learning Skills

Science.gov (United States)

Simon, Nicole A.

Virtual laboratory experiments using interactive computer simulations are not being employed as viable alternatives to laboratory science curriculum at extensive enough rates within higher education. Rote traditional lab experiments are currently the norm and are not addressing inquiry, Critical Thinking, and cognition throughout the laboratory experience, linking with educational technologies (Pyatt & Sims, 2007; 2011; Trundle & Bell, 2010). A causal-comparative quantitative study was conducted with 150 learners enrolled at a two-year community college, to determine the effects of simulation laboratory experiments on Higher-Order Learning, Critical Thinking Skills, and Cognitive Load. The treatment population used simulated experiments, while the non-treatment sections performed traditional expository experiments. A comparison was made using the Revised Two-Factor Study Process survey, Motivated Strategies for Learning Questionnaire, and the Scientific Attitude Inventory survey, using a Repeated Measures ANOVA test for treatment or non-treatment. A main effect of simulated laboratory experiments was found for both Higher-Order Learning, [F (1, 148) = 30.32,p = 0.00, eta2 = 0.12] and Critical Thinking Skills, [F (1, 148) = 14.64,p = 0.00, eta 2 = 0.17] such that simulations showed greater increases than traditional experiments. Post-lab treatment group self-reports indicated increased marginal means (+4.86) in Higher-Order Learning and Critical Thinking Skills, compared to the non-treatment group (+4.71). Simulations also improved the scientific skills and mastery of basic scientific subject matter. It is recommended that additional research recognize that learners' Critical Thinking Skills change due to different instructional methodologies that occur throughout a semester.

Simulation experiments and solar wind sputtering

International Nuclear Information System (INIS)

Griffith, J.E.; Papanastassiou, D.A.; Russell, W.A.; Tombrello, T.A.; Weller, R.A.

1978-01-01

In order to isolate the role played by solar wind sputtering from other lunar surface phenomena a number of simulation experiments were performed, including isotope abundance measurements of Ca sputtered from terrestrial fluorite and plagioclase by 50-keV and 130-keV 14 N beams, measurement of the energy distribution of U atoms sputtered with 80-keV 40 Ar, and measurement of the fraction of sputtered U atoms which stick on the surfaces used to collect these atoms. 10 references

Nursing Student Perceptions Regarding Simulation Experience Sequencing.

Science.gov (United States)

Woda, Aimee A; Gruenke, Theresa; Alt-Gehrman, Penny; Hansen, Jamie

2016-09-01

The use of simulated learning experiences (SLEs) have increased within nursing curricula with positive learning outcomes for nursing students. The purpose of this study is to explore nursing students' perceptions of their clinical decision making (CDM) related to the block sequencing of different patient care experiences, SLEs versus hospital-based learning experiences (HLEs). A qualitative descriptive design used open-ended survey questions to generate information about the block sequencing of SLEs and its impact on nursing students' perceived CDM. Three themes emerged from the data: Preexperience Anxiety, Real-Time Decision Making, and Increased Patient Care Experiences. Nursing students identified that having SLEs prior to HLEs provided several benefits. Even when students preferred SLEs prior to HLEs, the sequence did not impact their CDM. This suggests that alternating block sequencing can be used without impacting the students' perceptions of their ability to make decisions. [J Nurs Educ. 2016;55(9):528-532.]. Copyright 2016, SLACK Incorporated.

Modeling ramp compression experiments using large-scale molecular dynamics simulation.

Energy Technology Data Exchange (ETDEWEB)

Mattsson, Thomas Kjell Rene; Desjarlais, Michael Paul; Grest, Gary Stephen; Templeton, Jeremy Alan; Thompson, Aidan Patrick; Jones, Reese E.; Zimmerman, Jonathan A.; Baskes, Michael I. (University of California, San Diego); Winey, J. Michael (Washington State University); Gupta, Yogendra Mohan (Washington State University); Lane, J. Matthew D.; Ditmire, Todd (University of Texas at Austin); Quevedo, Hernan J. (University of Texas at Austin)

2011-10-01

Molecular dynamics simulation (MD) is an invaluable tool for studying problems sensitive to atomscale physics such as structural transitions, discontinuous interfaces, non-equilibrium dynamics, and elastic-plastic deformation. In order to apply this method to modeling of ramp-compression experiments, several challenges must be overcome: accuracy of interatomic potentials, length- and time-scales, and extraction of continuum quantities. We have completed a 3 year LDRD project with the goal of developing molecular dynamics simulation capabilities for modeling the response of materials to ramp compression. The techniques we have developed fall in to three categories (i) molecular dynamics methods (ii) interatomic potentials (iii) calculation of continuum variables. Highlights include the development of an accurate interatomic potential describing shock-melting of Beryllium, a scaling technique for modeling slow ramp compression experiments using fast ramp MD simulations, and a technique for extracting plastic strain from MD simulations. All of these methods have been implemented in Sandia's LAMMPS MD code, ensuring their widespread availability to dynamic materials research at Sandia and elsewhere.

A Facility for Long-Term Mars Simulation Experiments: The Mars Environmental Simulation Chamber (MESCH)

Science.gov (United States)

Jensen, Lars Liengaard; Merrison, Jonathan; Hansen, Aviaja Anna; Mikkelsen, Karina Aarup; Kristoffersen, Tommy; Nørnberg, Per; Lomstein, Bente Aagaard; Finster, Kai

2008-06-01

We describe the design, construction, and pilot operation of a Mars simulation facility comprised of a cryogenic environmental chamber, an atmospheric gas analyzer, and a xenon/mercury discharge source for UV generation. The Mars Environmental Simulation Chamber (MESCH) consists of a double-walled cylindrical chamber. The double wall provides a cooling mantle through which liquid N2 can be circulated. A load-lock system that consists of a small pressure-exchange chamber, which can be evacuated, allows for the exchange of samples without changing the chamber environment. Fitted within the MESCH is a carousel, which holds up to 10 steel sample tubes. Rotation of the carousel is controlled by an external motor. Each sample in the carousel can be placed at any desired position. Environmental data, such as temperature, pressure, and UV exposure time, are computer logged and used in automated feedback mechanisms, enabling a wide variety of experiments that include time series. Tests of the simulation facility have successfully demonstrated its ability to produce temperature cycles and maintain low temperature (down to -140°C), low atmospheric pressure (5 10 mbar), and a gas composition like that of Mars during long-term experiments.

Microcrack propagation under multiaxial loading - experiment and simulation

International Nuclear Information System (INIS)

Poetter, K.; Suhartono, A.; Yousefi, F.; Zenner, H.; Duewel, V.; Schram, A.

2000-01-01

The accuracy of lifetime prediction for technical components subjected to cyclic loading is still not satisfying. One essential reason for the deviation between the results of the lifetime calculation and experimental results is that it is not yet possible to generate a model capable to describe the microstructural damage process which occurs in the tested material and to integrate this model in the calculation. All of the present research results recognize that the growth of microcracks is significantly influenced by the microstructure of the material. In order to take into account the influence of the microstructure on the damage process a simulation model is suggested in this paper which considers the local stress state in addition to the random nature of the material structure in the form of grain boundaries and slip systems. The results generated by means of the simulation model are compared and verified with those experiences obtained from multiaxial fatigue testing of the investigated aluminum material. For this purpose the surfaces of the tested specimens are carefully observed to discover and analyze microcracks which are classified according to their number, length, and orientation. Moreover the mechanisms of crack initiation and propagation are major points of interest for the comparison of theoretical and experimental results. The developed computer software is suitable to simulate the microcrack initiation, the propagation and coalescence of microcracks as well as the transition of stage I cracks to stage II cracks for uniaxial and multiaxial loading. Results obtained from the simulation model could be verified with the experiment. The future aim to be emphasized is the utilization of the parameter investigations carried out with the computer simulation model in order to improve the lifetime prediction. (orig.)

Evaluation of Surface Runoff Generation Processes Using a Rainfall Simulator: A Small Scale Laboratory Experiment

Science.gov (United States)

Danáčová, Michaela; Valent, Peter; Výleta, Roman

2017-12-01

Nowadays, rainfall simulators are being used by many researchers in field or laboratory experiments. The main objective of most of these experiments is to better understand the underlying runoff generation processes, and to use the results in the process of calibration and validation of hydrological models. Many research groups have assembled their own rainfall simulators, which comply with their understanding of rainfall processes, and the requirements of their experiments. Most often, the existing rainfall simulators differ mainly in the size of the irrigated area, and the way they generate rain drops. They can be characterized by the accuracy, with which they produce a rainfall of a given intensity, the size of the irrigated area, and the rain drop generating mechanism. Rainfall simulation experiments can provide valuable information about the genesis of surface runoff, infiltration of water into soil and rainfall erodibility. Apart from the impact of physical properties of soil, its moisture and compaction on the generation of surface runoff and the amount of eroded particles, some studies also investigate the impact of vegetation cover of the whole area of interest. In this study, the rainfall simulator was used to simulate the impact of the slope gradient of the irrigated area on the amount of generated runoff and sediment yield. In order to eliminate the impact of external factors and to improve the reproducibility of the initial conditions, the experiments were conducted in laboratory conditions. The laboratory experiments were carried out using a commercial rainfall simulator, which was connected to an external peristaltic pump. The pump maintained a constant and adjustable inflow of water, which enabled to overcome the maximum volume of simulated precipitation of 2.3 l, given by the construction of the rainfall simulator, while maintaining constant characteristics of the simulated precipitation. In this study a 12-minute rainfall with a constant intensity

Numerical simulation of hypersonic flight experiment vehicle

OpenAIRE

Yamamoto, Yukimitsu; Yoshioka, Minako; 山本　行光; 吉岡　美菜子

1994-01-01

Hypersonic aerodynamic characteristics of Hypersonic FLight EXperiment (HYFLEX vehicle were investigated by numerical simulations using Navier-Stokes CFD (Computational Fluid Dynamics) code of NAL. Numerical results were compared with experimental data obtained at Hypersonic Wind Tunnel at NAL. In order to investigate real flight aerodynamic characteristics. numerical calculations corresponding to the flight conditions suffering from maximum aero thermodynamic heating were also made and the d...

Flight Technical Error Analysis of the SATS Higher Volume Operations Simulation and Flight Experiments

Science.gov (United States)

Williams, Daniel M.; Consiglio, Maria C.; Murdoch, Jennifer L.; Adams, Catherine H.

2005-01-01

This paper provides an analysis of Flight Technical Error (FTE) from recent SATS experiments, called the Higher Volume Operations (HVO) Simulation and Flight experiments, which NASA conducted to determine pilot acceptability of the HVO concept for normal operating conditions. Reported are FTE results from simulation and flight experiment data indicating the SATS HVO concept is viable and acceptable to low-time instrument rated pilots when compared with today s system (baseline). Described is the comparative FTE analysis of lateral, vertical, and airspeed deviations from the baseline and SATS HVO experimental flight procedures. Based on FTE analysis, all evaluation subjects, low-time instrument-rated pilots, flew the HVO procedures safely and proficiently in comparison to today s system. In all cases, the results of the flight experiment validated the results of the simulation experiment and confirm the utility of the simulation platform for comparative Human in the Loop (HITL) studies of SATS HVO and Baseline operations.

LSP Simulations of the Neutralized Drift Compression Experiment

CERN Document Server

Thoma, Carsten H; Gilson, Erik P; Henestroza, Enrique; Roy, Prabir K; Welch, Dale; Yu, Simon

2005-01-01

The Neutralized Drift Compression Experiment (NDCX) at Lawrence Berkeley National Laboratory involves the longitudinal compression of a singly-stripped K ion beam with a mean energy of 250 keV in a meter long plasma. We present simulation results of compression of the NDCX beam using the PIC code LSP. The NDCX beam encounters an acceleration gap with a time-dependent voltage that decelerates the front and accelerates the tail of a 500 ns pulse which is to be compressed 110 cm downstream. The simulations model both ideal and experimental voltage waveforms. Results show good longitudinal compression without significant emittance growth.

Open Source Communities in Technical Writing: Local Exigence, Global Extensibility

Science.gov (United States)

Conner, Trey; Gresham, Morgan; McCracken, Jill

2011-01-01

By offering open-source software (OSS)-based networks as an affordable technology alternative, we partnered with a nonprofit community organization. In this article, we narrate the client-based experiences of this partnership, highlighting the ways in which OSS and open-source culture (OSC) transformed our students' and our own expectations of…

Simulation Experiments in Practice: Statistical Design and Regression Analysis

OpenAIRE

Kleijnen, J.P.C.

2007-01-01

In practice, simulation analysts often change only one factor at a time, and use graphical analysis of the resulting Input/Output (I/O) data. The goal of this article is to change these traditional, naïve methods of design and analysis, because statistical theory proves that more information is obtained when applying Design Of Experiments (DOE) and linear regression analysis. Unfortunately, classic DOE and regression analysis assume a single simulation response that is normally and independen...

Simulation of an aperture-based antihydrogen gravity experiment

Directory of Open Access Journals (Sweden)

C. A. Ordonez

2012-03-01

Full Text Available A Monte Carlo simulation is presented of an experiment that could potentially determine whether antihydrogen accelerates vertically up or down as a result of earth's gravity. The experiment would rely on methods developed by existing antihydrogen research collaborations and would employ a Penning trap for the production of antihydrogen within a uniform magnetic field. The axis of symmetry of the cylindrical trap wall would be oriented horizontally, and an axisymmetric aperture (with an inner radius that is smaller than the cylindrical trap wall radius would be present a short distance away from the antihydrogen production region. Antihydrogen annihilations that occur along the cylindrical trap wall would be detected by the experiment. The distribution of annihilations along the wall would vary near the aperture, because some antihydrogen that would otherwise annihilate at the wall would instead annihilate on the aperture. That is, a shadow region forms behind the aperture, and the distribution of annihilations near the boundary of the shadow region is not azimuthally symmetric when the effect of gravity is significant. The Monte Carlo simulation is used together with analytical modeling to determine conditions under which the annihilation distribution would indicate the direction of the acceleration of antihydrogen due to gravity.

Simulation of hydrogen deflagration experiments in the ENACCEF facility using ASTEC code

International Nuclear Information System (INIS)

Povilaitis, Mantas; Urbonavicius, Egidijus; Rimkevicius, Sigitas

2011-01-01

During a hypothetic severe accident in the NPP involving degradation of the core of a light water reactor, hydrogen could be generated and released into the containment atmosphere posing a deflagration or even a detonation risk. In the case of deflagration, the integrity of the containment would be threatened by the increase of the containment atmosphere pressure and temperature. Other risks of containment damage due to turbulent flames exist, caused by high pressure pulses, shock waves and etc. For the simulation of such processes a reliable numerical codes are needed. Despite flame acceleration being largely studied for homogeneous hydrogen - air mixtures, there are still unresolved issues in this research area, e.g., the effect of turbulence level on flame acceleration and quenching. This paper presents simulations of hydrogen deflagration experiments in the ENACCEF facility using ASTEC code, performed in the frames of International Standard Program No. 49 and SARNET2 project. Experiments and simulations were performed with the aim of evaluating the codes' (a number of participants with various codes participated in the project) capabilities to simulate hydrogen combustion. ASTEC code is an integral lumped-parameter approach based nuclear safety analysis code. For the presented simulations, ASTEC modules CPA (containment thermohydromechanics) and FRONT (hydrogen deflagration) were used. Paper present ENACCEF test facility, its nodalisation schemes developed for the calculations, simulated experiments and simulations' results. Brief description of FRONT module is also presented. Calculations' results are compared with experimental results and analyzed. (author)

IPROP simulations of the GAMBLE II proton transport experiment

International Nuclear Information System (INIS)

Welch, D.R.

1993-01-01

The author has simulated the proton transport of the 6-kA, 1-MV GAMBLE II experiment using a modified version of the IPROP particle-in-cell code. IPROP now uses a hybrid model in which plasma electrons are divided into high-energy macro particle and thermal-fluid components. This model includes open-quotes knock-onclose quotes bound-electron collision and runaway sources for high-energy electrons. Using IPROP, the authors has calculated net currents in reasonable agreement with the experiment ranging from 5-11% of the total current in pressures from 0.25-4 torr helium. In the simulations, the pinch current sample by the 1.5-cm beam was 2-3 times larger than the net current at 4 cm radius. The attenuation of net current at larger radii was the result of a highly-conductive energetic component of plasma electrons surrounding the beam. Having benchmarked IPROP against experiment, the author has examined higher-current ion beams with respect to possible transport for inertial confinement fusion

Simulation of the beam guiding of the SAPHIR experiment by means of a differential-equation model; Simulation der Strahlfuehrung des SAPHIR-Experiments mittels eines Differentialgleichungsmodells

Energy Technology Data Exchange (ETDEWEB)

Greve, T.

1991-08-01

This paper shows the numerical simulation of a beam line by means of a model of differential equations simulating the beam line from the Bonn Electron Stretcher Accelerator ELSA to the SAPHIR spectrometer. Furthermore a method for calculating the initial values based on measurements of beam profiles is being discussed. (orig.). [Deutsch] Diese Arbeit zeigt die numerische Simulation einer Strahlfuehrung mittels eines Differentialgleichungsmodells anhand der Strahlfuehrung vom Bonner ELSA-Beschleuniger zum SAPHIR-Experiment. Weiterhin wird eine Methode zur Gewinnung der Startwerte aus Strahlprofilmessungen diskutiert. (orig.).

Nucleation and solidification of thin walled ductile iron - Experiments and numerical simulation

DEFF Research Database (Denmark)

Pedersen, Karl Martin; Tiedje, Niels Skat

2005-01-01

Investigation of solidification of thin walled ductile cast iron has been performed based on experiments and numerical simulation. The experiments were based on temperature and microstructure examination. Results of the experiments have been compared with a 1-D numerical solidification model...

Magnetohydrodynamic simulation of solid-deuterium-initiated Z-pinch experiments

International Nuclear Information System (INIS)

Sheehey, P.T.

1994-02-01

Solid-deuterium-initiated Z-pinch experiments are numerically simulated using a two-dimensional resistive magnetohydrodynamic model, which includes many important experimental details, such as ''cold-start'' initial conditions, thermal conduction, radiative energy loss, actual discharge current vs. time, and grids of sufficient size and resolution to allow realistic development of the plasma. The alternating-direction-implicit numerical technique used meets the substantial demands presented by such a computational task. Simulations of fiber-initiated experiments show that when the fiber becomes fully ionized rapidly developing m=0 instabilities, which originated in the coronal plasma generated from the ablating fiber, drive intense non-uniform heating and rapid expansion of the plasma column. The possibility that inclusion of additional physical effects would improve stability is explored. Finite-Larmor-radius-ordered Hall and diamagnetic pressure terms in the magnetic field evolution equation, corresponding energy equation terms, and separate ion and electron energy equations are included; these do not change the basic results. Model diagnostics, such as shadowgrams and interferograms, generated from simulation results, are in good agreement with experiment. Two alternative experimental approaches are explored: high-current magnetic implosion of hollow cylindrical deuterium shells, and ''plasma-on-wire'' (POW) implosion of low-density plasma onto a central deuterium fiber. By minimizing instability problems, these techniques may allow attainment of higher temperatures and densities than possible with bare fiber-initiated Z-pinches. Conditions for significant D-D or D-T fusion neutron production may be realizable with these implosion-based approaches

Assessing the impact of multiple altimeter missions and Argo in a global eddy-permitting data assimilation system

Science.gov (United States)

Verrier, Simon; Le Traon, Pierre-Yves; Remy, Elisabeth

2017-12-01

A series of observing system simulation experiments (OSSEs) is carried out with a global data assimilation system at 1/4° resolution using simulated data derived from a 1/12° resolution free-run simulation. The objective is to not only quantify how well multiple altimeter missions and Argo profiling floats can constrain the global ocean analysis and 7-day forecast at 1/4° resolution but also to better understand the sensitivity of results to data assimilation techniques used in Mercator Ocean operational systems. The impact of multiple altimeter data is clearly evidenced even at a 1/4° resolution. Seven-day forecasts of sea level and ocean currents are significantly improved when moving from one altimeter to two altimeters not only on the sea level, but also on the 3-D thermohaline structure and currents. In high-eddy-energy regions, sea level and surface current 7-day forecast errors when assimilating one altimeter data set are respectively 20 and 45 % of the error of the simulation without assimilation. Seven-day forecasts of sea level and ocean currents continue to be improved when moving from one altimeter to two altimeters with a relative error reduction of almost 30 %. The addition of a third altimeter still improves the 7-day forecasts even at this medium 1/4° resolution and brings an additional relative error reduction of about 10 %. The error level of the analysis with one altimeter is close to the 7-day forecast error level when two or three altimeter data sets are assimilated. Assimilating altimeter data also improves the representation of the 3-D ocean fields. The addition of Argo has a major impact on improving temperature and demonstrates the essential role of Argo together with altimetry in constraining a global data assimilation system. Salinity fields are only marginally improved. Results derived from these OSSEs are consistent with those derived from experiments with real data (observing system evaluations, OSEs) but they allow for more

MELCOR simulation of steam condensation effect on hydrogen behavior in THAI HM-2 experiment

Energy Technology Data Exchange (ETDEWEB)

Lee, Seongnyeon; Lee, Jung-Jae; Cho, Yong-Jin [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Kim, Sung Joong [Hanyang University, Seoul (Korea, Republic of)

2015-10-15

In this study, MELCOR simulation was carried out for THAI HM-2 experiment of OECD. As a results, stratification of hydrogen cloud was reasonably captured in MELCOR simulation. Furthermore, the pressure from simulation results in cases where mass transfer coefficient of MELCOR condensation model was modified was good agreement with the experimental results. Containment Filtered Ventilation System (CFVS) has been introduced as facility to prevent containment failure during severe accident. However, possibility of hydrogen risk has been issued due to inflow of hydrogen, condensation and removal of steam and complicated inner structure in CFVS. Preferentially benchmark work for THAI HM-2 experiment of OECD was decided to validate the methodology before detailed assessment of hydrogen risk in CFVS. The objectives of THAI HM-2 experiment were evaluation of hydrogen behavior, verification of numerical analysis tools and so on. In this paper, therefore, MELCOR simulation was carried out in comparison with the experiment results. Additionally, steam condensation effect was considered for detailed simulation. Hydrogen concentration from MELCOR results was underestimated in comparison to the experimental results.

Development and successful operation of the enhanced-interlink system of experiment data and numerical simulation in LHD

International Nuclear Information System (INIS)

Emoto, M.; Suzuki, C.; Suzuki, Y.; Yokoyama, M.; Seki, R.; Ida, K.

2014-10-01

The enhanced-interlink system of experiment data and numerical simulation has been developed, and successfully operated routinely in the Large Helical Device (LHD). This system consists of analyzed diagnostic data, real-time coordinate mapping, and automatic data processing. It has enabled automated data handling/transferring between experiment and numerical simulation, to extensively perform experiment analyses. It can be considered as one of the prototypes for a seamless data-centric approach for integrating experiment data and numerical simulation/modellings in fusion experiments. Utilizing this system, experimental analyses by numerical simulations have extensively progressed. The authors believe this data-centric approach for integrating experiment data and numerical simulation/modellings will contribute to not only the LHD but to other plasma fusion projects including DEMO reactor in the future. (author)

An overview of the design and analysis of simulation experiments for sensitivity analysis

NARCIS (Netherlands)

Kleijnen, J.P.C.

2005-01-01

Sensitivity analysis may serve validation, optimization, and risk analysis of simulation models. This review surveys 'classic' and 'modern' designs for experiments with simulation models. Classic designs were developed for real, non-simulated systems in agriculture, engineering, etc. These designs

An Overview of the Design and Analysis of Simulation Experiments for Sensitivity Analysis

NARCIS (Netherlands)

Kleijnen, J.P.C.

2004-01-01

Sensitivity analysis may serve validation, optimization, and risk analysis of simulation models.This review surveys classic and modern designs for experiments with simulation models.Classic designs were developed for real, non-simulated systems in agriculture, engineering, etc.These designs assume a

Experiments and Simulations of ITER-like Plasmas in Alcator C-Mod

International Nuclear Information System (INIS)

Wilson, R.; Kessel, C.E.; Wolfe, S.; Hutchinson, I.H.; Bonoli, P.; Fiore, C.; Hubbard, A.E.; Hughes, J.; Lin, Y.; Ma, Y.; Mikkelsen, D.; Reinke, M.; Scott, S.; Sips, A.C.C.; Wukitch, S.

2010-01-01

Alcator C-Mod is performing ITER-like experiments to benchmark and verify projections to 15 MA ELMy H-mode Inductive ITER discharges. The main focus has been on the transient ramp phases. The plasma current in C-Mod is 1.3 MA and toroidal field is 5.4 T. Both Ohmic and ion cyclotron (ICRF) heated discharges are examined. Plasma current rampup experiments have demonstrated that (ICRF and LH) heating in the rise phase can save voltseconds (V-s), as was predicted for ITER by simulations, but showed that the ICRF had no effect on the current profile versus Ohmic discharges. Rampdown experiments show an overcurrent in the Ohmic coil (OH) at the H to L transition, which can be mitigated by remaining in H-mode into the rampdown. Experiments have shown that when the EDA H-mode is preserved well into the rampdown phase, the density and temperature pedestal heights decrease during the plasma current rampdown. Simulations of the full C-Mod discharges have been done with the Tokamak Simulation Code (TSC) and the Coppi-Tang energy transport model is used with modified settings to provide the best fit to the experimental electron temperature profile. Other transport models have been examined also.

Experience with simulator training for emergency conditions

International Nuclear Information System (INIS)

1987-12-01

The training of operators by the use of simulators is common to most countries with nuclear power plants. Simulator training programmes are generally well developed, but their value can be limited by the age, type, size and capability of the simulator. Within these limits, most full scope simulators have a capability of training operators for a range of design basis accidents. It is recognized that human performance under accident conditions is difficult to predict or analyse, particularly in the area of severe accidents. These are rare events and by their very nature, unpredictable. Of importance, therefore, is to investigate the training of operators for severe accident conditions, and to examine ways in which simulators may be used in this task. The International Nuclear Safety Advisory Group (INSAG) has reviewed this field and the associated elements of human behaviour. It has recommended that activities are concentrated on this area. Initially it is encouraging the following objectives: i) To train operators for accident conditions including severe accidents and to strongly encourage the development and use of simulators for this purpose; ii) To improve the man-machine interface by the use of computer aids to the operator; iii) To develop human performance requirements for plant operating staff. As part of this work, the IAEA convened a technical committee on 15-19 September 1986 to review the experience with simulator training for emergency conditions, to review simulator modelling for severe accident training, to examine the role of human cognitive behaviour modelling, and to review guidance on accident scenarios. A substantial deviation may be a major fuel failure, a Loss of Coolant Accident (LOCA), etc. Examples of engineered safety features are: an Emergency Core Cooling System (ECCS), and Containment Systems. This report was prepared by the participants during the meeting and reviewed further in a Consultant's Meeting. It also includes papers which were

Monte Carlo simulation of fast neutron scattering experiments including DD-breakup neutrons

Energy Technology Data Exchange (ETDEWEB)

Schmidt, D.; Siebert, B.R.L.

1993-06-01

The computational simulation of the deuteron breakup in a scattering experiment has been investigated. Experimental breakup spectra measured at 16 deuteron energies and at 7 angles for each energy served as the data base. Analysis of these input data and of the conditions of the scattering experiment made it possible to reduce the input data. The use of one weighted breakup spectrum is sufficient to simulate the scattering spectra at one incident neutron energy. A number of tests were carried out to prove the validity of this result. The simulation of neutron scattering on carbon, including the breakup, was compared with measured spectra. Differences between calculated and measured spectra were for the most part within the experimental uncertainties. Certain significant deviations can be attributed to erroneous scattering cross sections taken from an evaluation and used in the simulation. Scattering on higher-lying states in [sup 12]C can be analyzed by subtracting the simulated breakup-scattering from the experimental spectra. (orig.)

Monte Carlo simulation of fast neutron scattering experiments including DD-breakup neutrons

International Nuclear Information System (INIS)

Schmidt, D.; Siebert, B.R.L.

1993-06-01

The computational simulation of the deuteron breakup in a scattering experiment has been investigated. Experimental breakup spectra measured at 16 deuteron energies and at 7 angles for each energy served as the data base. Analysis of these input data and of the conditions of the scattering experiment made it possible to reduce the input data. The use of one weighted breakup spectrum is sufficient to simulate the scattering spectra at one incident neutron energy. A number of tests were carried out to prove the validity of this result. The simulation of neutron scattering on carbon, including the breakup, was compared with measured spectra. Differences between calculated and measured spectra were for the most part within the experimental uncertainties. Certain significant deviations can be attributed to erroneous scattering cross sections taken from an evaluation and used in the simulation. Scattering on higher-lying states in 12 C can be analyzed by subtracting the simulated breakup-scattering from the experimental spectra. (orig.)

Monte-Carlo simulation of hadronic showers. Part 1: Comparison with experiment

International Nuclear Information System (INIS)

Amatuni, Ts.A.; Mamidjanyan, E.A.; Sanossyan, Kh.N.

1992-01-01

Hadronic showers are simulated by the MARS 10 code and compared with various experimental results obtained at high-energy accelerators. Good agreement between the experiment and the simulations is observed. MARS 10 is a fast and reliable instrument for numerical studies of the average characteristics of hadronic showers. 16 refs

Ideas in Practice (3): A Simulated Laboratory Experience in Digital Design.

Science.gov (United States)

Cleaver, Thomas G.

1988-01-01

Gives an example of the use of a simplified logic simulator in a logic design course. Discusses some problems in logic design classes, commercially available software, and software problems. Describes computer-aided engineering (CAE) software. Lists 14 experiments in the simulated laboratory and presents students' evaluation of the course. (YP)

Colloidal Asphaltene Deposition and Aggregation in Capillary Flow: Experiments and Mesoscopic Simulation

Science.gov (United States)

Boek, Edo S.; Ladva, Hemant K.; Crawshaw, John P.; Padding, Johan T.

2008-07-01

The aggregation and deposition of colloidal asphaltene in reservoir rock is a significant problem in the oil industry. To obtain a fundamental understanding of this phenomenon, we have studied the deposition and aggregation of colloidal asphaltene in capillary flow by experiment and simulation. For the simulation, we have used the stochastic rotation dynamics (SRD) method, in which the solvent hydrodynamic emerges from the collisions between the solvent particles, while the Brownian motion emerges naturally from the interactions between the colloidal asphaltene particles and the solvent. The asphaltene colloids interact through a screened Coulomb potential. We vary the well depth ɛ∝ and the flow rate v to obtain Peflow≫1 (hydrodynamic interactions dominate) and Re≪1 (Stokes flow). In the simulations, we impose a pressure drop over the capillary length and measure the corresponding solvent flow rate. We observe that the transient solvent flow rate decreases when the asphaltene particles become more "sticky". For a well depth ɛ∝ = 2kBT, a monolayer deposits on the capillary wall. With an increasing well depth, the capillary becomes totally blocked. The clogging is transient for ɛ∝ = 5kBT, but appears to be permanent for ɛ∝ = 10-20 kBT. We compare our simulation results with flow experiments in glass capillaries, where we use extracted asphaltenes in toluene, reprecipitated with n-heptane. In the experiments, the dynamics of asphaltene precipitation and deposition were monitored in a slot capillary using optical microscopy under flow conditions similar to those used in the simulation. Maintaining a constant flow rate of 5 μL min-1, we found that the pressure drop across the capillary first increased slowly, followed by a sharp increase, corresponding to a complete local blockage of the capillary. Doubling the flow rate to 10 μL min-1, we observe that the initial deposition occurs faster but the deposits are subsequently entrained by the flow. We

Epitaxial growth of Cu on Cu(001): Experiments and simulations

International Nuclear Information System (INIS)

Furman, Itay; Biham, Ofer; Zuo, Jiang-Kai; Swan, Anna K.; Wendelken, John

2000-01-01

A quantitative comparison between experimental and Monte Carlo simulation results for the epitaxial growth of Cu/Cu(001) in the submonolayer regime is presented. The simulations take into account a complete set of hopping processes whose activation energies are derived from semiempirical calculations using the embedded-atom method. The island separation is measured as a function of the incoming flux and the temperature. A good quantitative agreement between the experiment and simulation is found for the island separation, the activation energies for the dominant processes, and the exponents that characterize the growth. The simulation results are then analyzed at lower coverages, which are not accessible experimentally, providing good agreement with theoretical predictions as well

Urology Residents' Experience and Attitude Toward Surgical Simulation: Presenting our 4-Year Experience With a Multi-institutional, Multi-modality Simulation Model.

Science.gov (United States)

Chow, Alexander K; Sherer, Benjamin A; Yura, Emily; Kielb, Stephanie; Kocjancic, Ervin; Eggener, Scott; Turk, Thomas; Park, Sangtae; Psutka, Sarah; Abern, Michael; Latchamsetty, Kalyan C; Coogan, Christopher L

2017-11-01

To evaluate the Urological resident's attitude and experience with surgical simulation in residency education using a multi-institutional, multi-modality model. Residents from 6 area urology training programs rotated through simulation stations in 4 consecutive sessions from 2014 to 2017. Workshops included GreenLight photovaporization of the prostate, ureteroscopic stone extraction, laparoscopic peg transfer, 3-dimensional laparoscopy rope pass, transobturator sling placement, intravesical injection, high definition video system trainer, vasectomy, and Urolift. Faculty members provided teaching assistance, objective scoring, and verbal feedback. Participants completed a nonvalidated questionnaire evaluating utility of the workshop and soliciting suggestions for improvement. Sixty-three of 75 participants (84%) (postgraduate years 1-6) completed the exit questionnaire. Median rating of exercise usefulness on a scale of 1-10 ranged from 7.5 to 9. On a scale of 0-10, cumulative median scores of the course remained high over 4 years: time limit per station (9; interquartile range [IQR] 2), faculty instruction (9, IQR 2), ease of use (9, IQR 2), face validity (8, IQR 3), and overall course (9, IQR 2). On multivariate analysis, there was no difference in rating of domains between postgraduate years. Sixty-seven percent (42/63) believe that simulation training should be a requirement of Urology residency. Ninety-seven percent (63/65) viewed the laboratory as beneficial to their education. This workshop model is a valuable training experience for residents. Most participants believe that surgical simulation is beneficial and should be a requirement for Urology residency. High ratings of usefulness for each exercise demonstrated excellent face validity provided by the course. Copyright © 2017 Elsevier Inc. All rights reserved.

Shower library technique for fast simulation of showers in calorimeters of the H1 experiment

International Nuclear Information System (INIS)

Raičević, N.; Glazov, A.; Zhokin, A.

2013-01-01

Fast simulation of showers in calorimeters is very important for particle physics analysis since shower simulation typically takes significant amount of the simulation time. At the same time, a simulation must reproduce experimental data in the best possible way. In this paper, a fast simulation of showers in two calorimeters of the H1 experiment is presented. High speed and good quality of shower simulation is achieved by using a shower library technique in which the detector response is simulated using a collection of stored showers for different particle types and topologies. The library is created using the GEANT programme. The fast simulation based on shower library is compared to the data collected by the H1 experiment

Case study of open-source enterprise resource planning implementation in a small business

Science.gov (United States)

Olson, David L.; Staley, Jesse

2012-02-01

Enterprise resource planning (ERP) systems have been recognised as offering great benefit to some organisations, although they are expensive and problematic to implement. The cost and risk make well-developed proprietorial systems unaffordable to small businesses. Open-source software (OSS) has become a viable means of producing ERP system products. The question this paper addresses is the feasibility of OSS ERP systems for small businesses. A case is reported involving two efforts to implement freely distributed ERP software products in a small US make-to-order engineering firm. The case emphasises the potential of freely distributed ERP systems, as well as some of the hurdles involved in their implementation. The paper briefly reviews highlights of OSS ERP systems, with the primary focus on reporting the case experiences for efforts to implement ERPLite software and xTuple software. While both systems worked from a technical perspective, both failed due to economic factors. While these economic conditions led to imperfect results, the case demonstrates the feasibility of OSS ERP for small businesses. Both experiences are evaluated in terms of risk dimension.

Differentiating levels of surgical experience on a virtual reality temporal bone simulator.

Science.gov (United States)

Zhao, Yi C; Kennedy, Gregor; Hall, Richard; O'Leary, Stephen

2010-11-01

Virtual reality simulation is increasingly being incorporated into surgical training and may have a role in temporal bone surgical education. Here we test whether metrics generated by a virtual reality surgical simulation can differentiate between three levels of experience, namely novices, otolaryngology residents, and experienced qualified surgeons. Cohort study. Royal Victorian Eye and Ear Hospital. Twenty-seven participants were recruited. There were 12 experts, six residents, and nine novices. After orientation, participants were asked to perform a modified radical mastoidectomy on the simulator. Comparisons of time taken, injury to structures, and forces exerted were made between the groups to determine which specific metrics would discriminate experience levels. Experts completed the simulated task in significantly shorter time than the other two groups (experts 22 minutes, residents 36 minutes, and novices 46 minutes; P = 0.001). Novices exerted significantly higher average forces when dissecting close to vital structures compared with experts (0.24 Newton [N] vs 0.13 N, P = 0.002). Novices were also more likely to injure structures such as dura compared to experts (23 injuries vs 3 injuries, P = 0.001). Compared with residents, the experts modulated their force between initial cortex dissection and dissection close to vital structures. Using the combination of these metrics, we were able to correctly classify the participants' level of experience 90 percent of the time. This preliminary study shows that measurements of performance obtained from within a virtual reality simulator can differentiate between levels of users' experience. These results suggest that simulator training may have a role in temporal bone training beyond foundational training. Copyright © 2010 American Academy of Otolaryngology–Head and Neck Surgery Foundation. Published by Mosby, Inc. All rights reserved.

Full scope simulator commissioning and training experience at Cernavoda NPP

International Nuclear Information System (INIS)

Balan, M.

2000-01-01

The paper presents the experience gained during commissioning and the initial use of the CANDU training full-scope simulator for operation personnel at Cernavoda NPP. The full-scope simulator as an integral part of the training programs that take place in Cernavoda Nuclear Training Department (CNTD), is mainly used for the development of operational skills, knowledge and attitudes required to operate the plant in a safe and efficient manner. (author)

Bringing history to life: simulating landmark experiments in psychology.

Science.gov (United States)

Boynton, David M; Smith, Laurence D

2006-05-01

The course in history of psychology can be challenging for students, many of whom enter it with little background in history and faced with unfamiliar names and concepts. The sheer volume of material can encourage passive memorization unless efforts are made to increase student involvement. As part of a trend toward experiential history, historians of science have begun to supplement their lectures with demonstrations of classic physics experiments as a way to bring the history of science to life. Here, the authors report on computer simulations of five landmark experiments from early experimental psychology in the areas of reaction time, span of attention, and apparent motion. The simulations are designed not only to permit hands-on replication of historically important results but also to reproduce the experimental procedures closely enough that students can gain a feel for the nature of early research and the psychological processes being studied.

High-Fidelity Simulation of Pediatric Emergency Care: An Eye-Opening Experience for Baccalaureate Nursing Students.

Science.gov (United States)

Small, Sandra P; Colbourne, Peggy A; Murray, Cynthia L

2018-01-01

Background Little attention has been given to in-depth examination of what high-fidelity simulation is like for nursing students within the context of a pediatric emergency, such as a cardiopulmonary arrest. It is possible that such high-fidelity simulation could provoke in nursing students intense psychological reactions. Purpose The purpose of this study was to learn about baccalaureate nursing students' lived experience of high-fidelity simulation of pediatric cardiopulmonary arrest. Method Phenomenological methods were used. Twenty-four interviews were conducted with 12 students and were analyzed for themes. Results The essence of the experience is that it was eye-opening. The students found the simulation to be a surprisingly realistic nursing experience as reflected in their perceiving the manikin as a real patient, thinking that they were saving their patient's life, feeling like a real nurse, and feeling relief after mounting stress. It was a surprisingly valuable learning experience in that the students had an increased awareness of the art and science of nursing and increased understanding of the importance of teamwork and were feeling more prepared for clinical practice and wanting more simulation experiences. Conclusion Educators should capitalize on the benefits of high-fidelity simulation as a pedagogy, while endeavoring to provide psychologically safe learning.

Rainfall simulation experiments in the southwestern USA using the Walnut Gulch Rainfall Simulator

Science.gov (United States)

Polyakov, Viktor; Stone, Jeffry; Holifield Collins, Chandra; Nearing, Mark A.; Paige, Ginger; Buono, Jared; Gomez-Pond, Rae-Landa

2018-01-01

This dataset contains hydrological, erosion, vegetation, ground cover, and other supplementary information from 272 rainfall simulation experiments conducted on 23 semiarid rangeland locations in Arizona and Nevada between 2002 and 2013. On 30 % of the plots, simulations were conducted up to five times during the decade of study. The rainfall was generated using the Walnut Gulch Rainfall Simulator on 2 m by 6 m plots. Simulation sites included brush and grassland areas with various degrees of disturbance by grazing, wildfire, or brush removal. This dataset advances our understanding of basic hydrological and biological processes that drive soil erosion on arid rangelands. It can be used to estimate runoff, infiltration, and erosion rates at a variety of ecological sites in the Southwestern USA. The inclusion of wildfire and brush treatment locations combined with long-term observations makes it important for studying vegetation recovery, ecological transitions, and the effect of management. It is also a valuable resource for erosion model parameterization and validation. The dataset is available from the National Agricultural Library at https://data.nal.usda.gov/search/type/dataset (DOI: https://doi.org/10.15482/USDA.ADC/1358583).

Developments of multibody system dynamics: computer simulations and experiments

International Nuclear Information System (INIS)

Yoo, Wan-Suk; Kim, Kee-Nam; Kim, Hyun-Woo; Sohn, Jeong-Hyun

2007-01-01

It is an exceptional success when multibody dynamics researchers Multibody System Dynamics journal one of the most highly ranked journals in the last 10 years. In the inaugural issue, Professor Schiehlen wrote an interesting article explaining the roots and perspectives of multibody system dynamics. Professor Shabana also wrote an interesting article to review developments in flexible multibody dynamics. The application possibilities of multibody system dynamics have grown wider and deeper, with many application examples being introduced with multibody techniques in the past 10 years. In this paper, the development of multibody dynamics is briefly reviewed and several applications of multibody dynamics are described according to the author's research results. Simulation examples are compared to physical experiments, which show reasonableness and accuracy of the multibody formulation applied to real problems. Computer simulations using the absolute nodal coordinate formulation (ANCF) were also compared to physical experiments; therefore, the validity of ANCF for large-displacement and large-deformation problems was shown. Physical experiments for large deformation problems include beam, plate, chain, and strip. Other research topics currently being carried out in the author's laboratory are also briefly explained

Simulating experiments using a Comsol application for teaching scientific research methods

NARCIS (Netherlands)

Schijndel, van A.W.M.

2015-01-01

For universities it is important to teach the principles of scientific methods as soon as possible. However, in case of performing experiments, students need to have some knowledge and skills before start doing measurements. In this case, Comsol can be helpfully by simulating the experiments before

NUCLEBRAS' experience in the implantation of a nuclear power plants simulator

International Nuclear Information System (INIS)

Spitalnik, J.; Fonseca, G.

1985-01-01

The experiences gained by NUCLEBRAS in the setting up of a Nuclear Power Plant Simulator Training Center, cover the design and manufacture of the simulator for the Angra-2 type nuclear power plants, the training of the simulator operation and maintenance personnel, in preparation for the training of the Brazilian nuclear power plant operators, the development of the simulator training programs and materials, the temporary installation and utilization of the simulator in the FRG, including the training of operators of the Trillo nuclear power plant, in Spain. The simulator shall be finally installed in Brazil, at the vicinity of the Angra-2 site, in 1985, when it is foreseen to start the training of the Angra-2 operators. (Author) [pt

Multi-physic simulations of irradiation experiments in a technological irradiation reactor

International Nuclear Information System (INIS)

Bonaccorsi, Th.

2007-09-01

A Material Testing Reactor (MTR) makes it possible to irradiate material samples under intense neutron and photonic fluxes. These experiments are carried out in experimental devices localised in the reactor core or in periphery (reflector). Available physics simulation tools only treat, most of the time, one physics field in a very precise way. Multi-physic simulations of irradiation experiments therefore require a sequential use of several calculation codes and data exchanges between these codes: this corresponds to problems coupling. In order to facilitate multi-physic simulations, this thesis sets up a data model based on data-processing objects, called Technological Entities. This data model is common to all of the physics fields. It permits defining the geometry of an irradiation device in a parametric way and to associate information about materials to it. Numerical simulations are encapsulated into interfaces providing the ability to call specific functionalities with the same command (to initialize data, to launch calculations, to post-treat, to get results,... ). Thus, once encapsulated, numerical simulations can be re-used for various studies. This data model is developed in a SALOME platform component. The first application case made it possible to perform neutronic simulations (OSIRIS reactor and RJH) coupled with fuel behavior simulations. In a next step, thermal hydraulics could also be taken into account. In addition to the improvement of the calculation accuracy due to the physical phenomena coupling, the time spent in the development phase of the simulation is largely reduced and the possibilities of uncertainty treatment are under consideration. (author)

Simulation Experiments in Practice : Statistical Design and Regression Analysis

NARCIS (Netherlands)

Kleijnen, J.P.C.

2007-01-01

In practice, simulation analysts often change only one factor at a time, and use graphical analysis of the resulting Input/Output (I/O) data. Statistical theory proves that more information is obtained when applying Design Of Experiments (DOE) and linear regression analysis. Unfortunately, classic

Simulation and modeling of the Gamble II self-pinched ion beam transport experiment

International Nuclear Information System (INIS)

Rose, D.V.; Ottinger, P.F.; Hinshelwood, D.D.

1999-01-01

Progress in numerical simulations and modeling of the self-pinched ion beam transport experiment at the Naval Research Laboratory (NRL) is reviewed. In the experiment, a 1.2-MeV, 100-kA proton beam enters a 1-m long, transport region filled with a low pressure gas (30--250 mTorr helium, or 1 Torr air). The time-dependent velocity distribution function of the injected ion beam is determined from an orbit code that uses a pinch-reflex ion diode model and the measured voltage and current from this diode on the Gamble II generator at NRL. This distribution function is used as the beam input condition for numerical simulations carried out using the hybrid particle-in-cell code IPROP. Results of the simulations will be described, and detailed comparisons will be made with various measurements, including line-integrated electron-density, proton-fluence, and beam radial-profile measurements. As observed in the experiment, the simulations show evidence of self-pinching for helium pressures between 35 and 80 mTorr. Simulations and measurements in 1 Torr air show ballistic transport. The relevance of these results to ion-driven inertial confinement fusion will be discussed

Apollo experience report: Guidance and control systems. Engineering simulation program

Science.gov (United States)

Gilbert, D. W.

1973-01-01

The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

Long-term durability experiments with concrete-based waste packages in simulated repository conditions

International Nuclear Information System (INIS)

Ipatti, A.

1993-03-01

Two extensive experiments on long-term durability of waste packages in simulated repository conditions are described. The first one is a 'half-scale experiment' comprising radioactive waste product and half-scale concrete containers in site specific groundwater conditions. The second one is 'full-scale experiment' including simulated inactive waste product and full-scale concrete container stored in slowly flowing fresh water. The scope of the experiments is to demonstrate long-term behaviour of the designed waste packages in contact with moderately concrete aggressive groundwater, and to evaluate the possible interactions between the waste product, concrete container and ground water. As the waste packages are made of high-quality concrete, provisions have been made to continue the experiments for several years

Computer simulation of FT-NMR multiple pulse experiment

Science.gov (United States)

Allouche, A.; Pouzard, G.

1989-04-01

Using the product operator formalism in its real form, SIMULDENS expands the density matrix of a scalar coupled nuclear spin system and simulates analytically a large variety of FT-NMR multiple pulse experiments. The observable transverse magnetizations are stored and can be combined to represent signal accumulation. The programming language is VAX PASCAL, but a MacIntosh Turbo Pascal Version is also available.

Gas-grain simulation experiment module conceptual design and gas-grain simulation facility breadboard development

Science.gov (United States)

Zamel, James M.; Petach, Michael; Gat, Nahum; Kropp, Jack; Luong, Christina; Wolff, Michael

1993-12-01

This report delineates the Option portion of the Phase A Gas-Grain Simulation Facility study. The conceptual design of a Gas-Grain Simulation Experiment Module (GGSEM) for Space Shuttle Middeck is discussed. In addition, a laboratory breadboard was developed during this study to develop a key function for the GGSEM and the GGSF, specifically, a solid particle cloud generating device. The breadboard design and test results are discussed and recommendations for further studies are included. The GGSEM is intended to fly on board a low earth orbit (LEO), manned platform. It will be used to perform a subset of the experiments planned for the GGSF for Space Station Freedom, as it can partially accommodate a number of the science experiments. The outcome of the experiments performed will provide an increased understanding of the operational requirements for the GGSF. The GGSEM will also act as a platform to accomplish technology development and proof-of-principle experiments for GGSF hardware, and to verify concepts and designs of hardware for GGSF. The GGSEM will allow assembled subsystems to be tested to verify facility level operation. The technology development that can be accommodated by the GGSEM includes: GGSF sample generation techniques, GGSF on-line diagnostics techniques, sample collection techniques, performance of various types of sensors for environmental monitoring, and some off-line diagnostics. Advantages and disadvantages of several LEO platforms available for GGSEM applications are identified and discussed. Several of the anticipated GGSF experiments require the de-agglomeration and dispensing of dry solid particles into an experiment chamber. During the GGSF Phase A study, various techniques and devices available for the solid particle aerosol generator were reviewed. As a result of this review, solid particle de-agglomeration and dispensing were identified as key undeveloped technologies in the GGSF design. A laboratory breadboard version of a solid

Pre-launch simulation experiment of microwave-ionosphere nonlinear interaction rocket experiment in the space plasma chamber

Energy Technology Data Exchange (ETDEWEB)

Kaya, N. (Kobe University, Kobe, Japan); Tsutsui, M. (Kyoto University, Uji, Japan); Matsumoto, H. (Kyoto University, Kyoto, Japan)

1980-09-01

A pre-flight test experiment of a microwave-ionosphere nonlinear interaction rocket experiment (MINIX) has been carried out in a space plasma simulation chamber. Though the first rocket experiment ended up in failure because of a high voltage trouble, interesting results are observed in the pre-flight experiment. A significant microwave heating of plasma up to 300% temperature increase is observed. Strong excitations of plasma waves by the transmitted microwaves in the VLF and HF range are observed as well. These microwave effects may have to be taken into account in solar power satellite projects in the future.

Using interactive model simulations in co-design : An experiment in urban design

NARCIS (Netherlands)

Steen, M.G.D.; Arendsen, J.; Cremers, A.H.M.; Vries, A. de; Jong, J.M.G. de; Koning, N.M. de

2013-01-01

This paper presents an experiment in which people performed a co-design task in urban design, using a multi-user touch table application with or without interactive model simulations. We hypothesised that using the interactive model simulations would improve communication and co-operation between

Comparison of scattering experiments using synchrotron radiation with Monte Carlo simulations using Geant4

International Nuclear Information System (INIS)

Gerlach, M.; Krumrey, M.; Cibik, L.; Mueller, P.; Ulm, G.

2009-01-01

Monte Carlo techniques are powerful tools to simulate the interaction of electromagnetic radiation with matter. One of the most widespread simulation program packages is Geant4. Almost all physical interaction processes can be included. However, it is not evident what accuracy can be obtained by a simulation. In this work, results of scattering experiments using monochromatized synchrotron radiation in the X-ray regime are quantitatively compared to the results of simulations using Geant4. Experiments were performed for various scattering foils made of different materials such as copper and gold. For energy-dispersive measurements of the scattered radiation, a cadmium telluride detector was used. The detector was fully characterized and calibrated with calculable undispersed as well as monochromatized synchrotron radiation. The obtained quantum efficiency and the response functions are in very good agreement with the corresponding Geant4 simulations. At the electron storage ring BESSY II the number of incident photons in the scattering experiments was measured with a photodiode that had been calibrated against a cryogenic radiometer, so that a direct comparison of scattering experiments with Monte Carlo simulations using Geant4 was possible. It was shown that Geant4 describes the photoeffect, including fluorescence as well as the Compton and Rayleigh scattering, with high accuracy, resulting in a deviation of typically less than 20%. Even polarization effects are widely covered by Geant4, and for Doppler broadening of Compton-scattered radiation the extension G4LECS can be included, but the fact that both features cannot be combined is a limitation. For most polarization-dependent simulations, good agreement with the experimental results was found, except for some orientations where Rayleigh scattering was overestimated in the simulation.

Comparison of scattering experiments using synchrotron radiation with Monte Carlo simulations using Geant4

Science.gov (United States)

Gerlach, M.; Krumrey, M.; Cibik, L.; Müller, P.; Ulm, G.

2009-09-01

Monte Carlo techniques are powerful tools to simulate the interaction of electromagnetic radiation with matter. One of the most widespread simulation program packages is Geant4. Almost all physical interaction processes can be included. However, it is not evident what accuracy can be obtained by a simulation. In this work, results of scattering experiments using monochromatized synchrotron radiation in the X-ray regime are quantitatively compared to the results of simulations using Geant4. Experiments were performed for various scattering foils made of different materials such as copper and gold. For energy-dispersive measurements of the scattered radiation, a cadmium telluride detector was used. The detector was fully characterized and calibrated with calculable undispersed as well as monochromatized synchrotron radiation. The obtained quantum efficiency and the response functions are in very good agreement with the corresponding Geant4 simulations. At the electron storage ring BESSY II the number of incident photons in the scattering experiments was measured with a photodiode that had been calibrated against a cryogenic radiometer, so that a direct comparison of scattering experiments with Monte Carlo simulations using Geant4 was possible. It was shown that Geant4 describes the photoeffect, including fluorescence as well as the Compton and Rayleigh scattering, with high accuracy, resulting in a deviation of typically less than 20%. Even polarization effects are widely covered by Geant4, and for Doppler broadening of Compton-scattered radiation the extension G4LECS can be included, but the fact that both features cannot be combined is a limitation. For most polarization-dependent simulations, good agreement with the experimental results was found, except for some orientations where Rayleigh scattering was overestimated in the simulation.

Comparison of scattering experiments using synchrotron radiation with Monte Carlo simulations using Geant4

Energy Technology Data Exchange (ETDEWEB)

Gerlach, M. [Physikalisch-Technische Bundesanstalt, Abbestr. 2-12, 10587 Berlin (Germany); Krumrey, M. [Physikalisch-Technische Bundesanstalt, Abbestr. 2-12, 10587 Berlin (Germany)], E-mail: Michael.Krumrey@ptb.de; Cibik, L.; Mueller, P.; Ulm, G. [Physikalisch-Technische Bundesanstalt, Abbestr. 2-12, 10587 Berlin (Germany)

2009-09-11

Monte Carlo techniques are powerful tools to simulate the interaction of electromagnetic radiation with matter. One of the most widespread simulation program packages is Geant4. Almost all physical interaction processes can be included. However, it is not evident what accuracy can be obtained by a simulation. In this work, results of scattering experiments using monochromatized synchrotron radiation in the X-ray regime are quantitatively compared to the results of simulations using Geant4. Experiments were performed for various scattering foils made of different materials such as copper and gold. For energy-dispersive measurements of the scattered radiation, a cadmium telluride detector was used. The detector was fully characterized and calibrated with calculable undispersed as well as monochromatized synchrotron radiation. The obtained quantum efficiency and the response functions are in very good agreement with the corresponding Geant4 simulations. At the electron storage ring BESSY II the number of incident photons in the scattering experiments was measured with a photodiode that had been calibrated against a cryogenic radiometer, so that a direct comparison of scattering experiments with Monte Carlo simulations using Geant4 was possible. It was shown that Geant4 describes the photoeffect, including fluorescence as well as the Compton and Rayleigh scattering, with high accuracy, resulting in a deviation of typically less than 20%. Even polarization effects are widely covered by Geant4, and for Doppler broadening of Compton-scattered radiation the extension G4LECS can be included, but the fact that both features cannot be combined is a limitation. For most polarization-dependent simulations, good agreement with the experimental results was found, except for some orientations where Rayleigh scattering was overestimated in the simulation.

New method of processing heat treatment experiments with numerical simulation support

Science.gov (United States)

Kik, T.; Moravec, J.; Novakova, I.

2017-08-01

In this work, benefits of combining modern software for numerical simulations of welding processes with laboratory research was described. Proposed new method of processing heat treatment experiments leading to obtaining relevant input data for numerical simulations of heat treatment of large parts was presented. It is now possible, by using experiments on small tested samples, to simulate cooling conditions comparable with cooling of bigger parts. Results from this method of testing makes current boundary conditions during real cooling process more accurate, but also can be used for improvement of software databases and optimization of a computational models. The point is to precise the computation of temperature fields for large scale hardening parts based on new method of temperature dependence determination of the heat transfer coefficient into hardening media for the particular material, defined maximal thickness of processed part and cooling conditions. In the paper we will also present an example of the comparison standard and modified (according to newly suggested methodology) heat transfer coefficient data’s and theirs influence on the simulation results. It shows how even the small changes influence mainly on distribution of temperature, metallurgical phases, hardness and stresses distribution. By this experiment it is also possible to obtain not only input data and data enabling optimization of computational model but at the same time also verification data. The greatest advantage of described method is independence of used cooling media type.

Training simulators in nuclear power plants: Experience, programme design and assessment methodology. Proceedings of a specialists' meeting

International Nuclear Information System (INIS)

1997-11-01

Simulators became an indispensable part of training world-wide. Therefore, international exchange of information is important to share the experience gained in different countries in order to assure high international standards. A second aspects is the tremendous evolution in the computing capacities of the simulator hardware and the increasing functionality of the simulator software. This background has let the IAEA to invite the simulator experts for an experience exchange. The German Simulator Centre in Essen, which is operated by the companies KSG and GfS, was asked to host this Specialists' Meeting. The Specialists' Meeting on ''Training Simulators in Nuclear Power Plants: Experience, Programme Design and Assessment Methodology'' was organized by IAEA in-cooperation with the German Simulator Centre operated by KSG Kraftwerks-Simulator-Gesellschaft mbH and GfS Gesellschaft fuer Simulatorschulung mbH and was held from 17 - 19 November 1997 in Essen, Germany. The meeting focused on developments in simulation technology, experiences with simulator upgrades, utilization of computerized tools as support and complement of simulator training, use of simulators for other purposes. The meeting was attended by 50 participants from 16 countries. In the course of four sessions 21 technical presentations were made. The present volume contains the papers by national delegates at the Specialists' Meeting

Training simulators in nuclear power plants: Experience, programme design and assessment methodology. Proceedings of a specialists` meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-11-01

Simulators became an indispensable part of training world-wide. Therefore, international exchange of information is important to share the experience gained in different countries in order to assure high international standards. A second aspects is the tremendous evolution in the computing capacities of the simulator hardware and the increasing functionality of the simulator software. This background has let the IAEA to invite the simulator experts for an experience exchange. The German Simulator Centre in Essen, which is operated by the companies KSG and GfS, was asked to host this Specialists` Meeting. The Specialists` Meeting on ``Training Simulators in Nuclear Power Plants: Experience, Programme Design and Assessment Methodology`` was organized by IAEA in-cooperation with the German Simulator Centre operated by KSG Kraftwerks-Simulator-Gesellschaft mbH and GfS Gesellschaft fuer Simulatorschulung mbH and was held from 17 - 19 November 1997 in Essen, Germany. The meeting focused on developments in simulation technology, experiences with simulator upgrades, utilization of computerized tools as support and complement of simulator training, use of simulators for other purposes. The meeting was attended by 50 participants from 16 countries. In the course of four sessions 21 technical presentations were made. The present volume contains the papers by national delegates at the Specialists` Meeting Refs, figs, tabs

Applications of simulation experiments in LMFBR core materials technology

International Nuclear Information System (INIS)

Appleby, W.K.

1976-01-01

The development of charged particle bombardment experiments to simulate neutron irradiation induced swelling in austenitic alloys is briefly described. The applications of these techniques in LMFBR core materials technology are discussed. It is shown that use of the techniques to study the behavior of cold-worked Type-316 was instrumental in demonstrating at an early date the need for advanced materials. The simulation techniques then were used to identify alloying elements which can markedly decrease swelling and thus a focused reactor irradiation program is now in place to allow the future use of a lower swelling alloy for LMFBR core components

Computer simulation of FT-NMR multiple pulse experiment

International Nuclear Information System (INIS)

Allouche, A.; Pouzard, G.

1989-01-01

Using the product operator formalism in its real form, SIMULDENS expands the density matrix of a scalar coupled nuclear spin system and simulates analytically a large variety of FT-NMR multiple pulse experiments. The observable transverse magnetizations are stored and can be combined to represent signal accumulation. The programming language is VAX PASCAL, but a MacIntosh Turbo Pascal Version is also available. (orig.)

A numerical tool for reproducing driver behaviour: experiments and predictive simulations.

Science.gov (United States)

Casucci, M; Marchitto, M; Cacciabue, P C

2010-03-01

This paper presents the simulation tool called SDDRIVE (Simple Simulation of Driver performance), which is the numerical computerised implementation of the theoretical architecture describing Driver-Vehicle-Environment (DVE) interactions, contained in Cacciabue and Carsten [Cacciabue, P.C., Carsten, O. A simple model of driver behaviour to sustain design and safety assessment of automated systems in automotive environments, 2010]. Following a brief description of the basic algorithms that simulate the performance of drivers, the paper presents and discusses a set of experiments carried out in a Virtual Reality full scale simulator for validating the simulation. Then the predictive potentiality of the tool is shown by discussing two case studies of DVE interactions, performed in the presence of different driver attitudes in similar traffic conditions.

In-flight thermal experiments for LISA Pathfinder: Simulating temperature noise at the Inertial Sensors

International Nuclear Information System (INIS)

Armano, M; Audley, H; Born, M; Danzmann, K; Diepholz, I; Auger, G; Binetruy, P; Baird, J; Bortoluzzi, D; Brandt, N; Fitzsimons, E; Bursi, A; Caleno, M; Cavalleri, A; Cesarini, A; Dolesi, R; Ferroni, V; Cruise, M; Dunbar, N; Ferraioli, L

2015-01-01

Thermal Diagnostics experiments to be carried out on board LISA Pathfinder (LPF) will yield a detailed characterisation of how temperature fluctuations affect the LTP (LISA Technology Package) instrument performance, a crucial information for future space based gravitational wave detectors as the proposed eLISA. Amongst them, the study of temperature gradient fluctuations around the test masses of the Inertial Sensors will provide as well information regarding the contribution of the Brownian noise, which is expected to limit the LTP sensitivity at frequencies close to 1 mHz during some LTP experiments. In this paper we report on how these kind of Thermal Diagnostics experiments were simulated in the last LPF Simulation Campaign (November, 2013) involving all the LPF Data Analysis team and using an end-to-end simulator of the whole spacecraft. Such simulation campaign was conducted under the framework of the preparation for LPF operations. (paper)

The effects of computer assisted physics experiment simulations on students' learning

Directory of Open Access Journals (Sweden)

Turhan Civelek

2013-11-01

Full Text Available The main goal of this study is to present the significant difference between utilization of simulations of physics experiment during lectures and traditional physics lecture. Two groups of 115 students were selected for the purpose of the study. The same subjects have been taught to both groups, while a group of 115 had their lectures in science and technology class supported by physics experiment simulations for a month, the other group of115 had their lectures ina traditional way. The research has been conducted in Izzet Unver highs school in Istanbul, Gungoren. The main resource of this research is the data collected through surveys. The survey is a result of the literature and the suggestions of the experts on the topic. Thirty questions were prepared under ten topics. Two different surveys were conducted during the data collection. While the first survey questions focused on the effects of traditional lecturing on students, the second survey questions were targeting the effects of lecturing via the support of psychics experiment simulations. The data collected as a result of the survey which was coded in to SPSS Software and statistical anal yses was conducted. In order to test the significant difference between the means t-test was utilized. 0.05 was chosen as the significance level. As a result of the analyses utilized, significant differences were found in their satisfaction on class materials, in their motivation, in their learning speed, in their interest in the class, and in their contribution to the class. In findings such as the effect on students’ learning, information availability, organization of information, students’ integration to the class and gaining different point of views “lectures supported by physics experiment simulations” is significantly different from traditional lecturing. As the result of the literature review and the statistical analyses, “lectures supported via physics experiment simulations” seem to

Reform and practice for photoelectric specialty experimental teaching based on virtual simulation experiment platform

Science.gov (United States)

Ye, Yan; Lv, Qingsong; Wu, Maocheng; Xu, Yishen; Gu, Jihua

2017-08-01

In view of some problems about the traditional photoelectric specialty experimental teaching process, such as separation of theoretical teaching and practical teaching, immobilization of experimental teaching contents, low quality of experiments and no obvious effect, we explored and practiced a new experimental teaching model of "theoretical teaching, virtual simulation and physical experiment", which combined the characteristics of photoelectric information science and engineering major and the essential requirements of engineering innovation talents cultivation. The virtual simulation experiment platform has many advantages, such as high performance-to-price ratio, easy operation and open experimental process, which makes virtual simulation combine physical experiment, complete each other with virtual for practical. After the users log into the virtual simulation experimental platform, they will first study the contents of the experiment, clarify the purpose and requirements of the experiment, master the method of using the instrument and the relevant notes, and then use the experimental instruments provided by the platform to build the corresponding experimental system. Once the experimenter's optical path is set incorrectly or the instrument parameters are set incorrectly, the error or warning message will be automatically triggered, and the reference information will be given instructing the student to complete the correct experimental operation. The results of our practice in recent years show that the teaching reform of the photoelectric specialty experiments has not only brought great convenience to the experimental teaching management, broadened the students' thinking and vision, enhanced the students' experimental skills and comprehensive qualities, but also made the students participate in the experiment with their enthusiasm. During the construction of experiment programs, the students' engineering practical ability and independent innovation awareness

Simulations of Laboratory Astrophysics Experiments using the CRASH code

Science.gov (United States)

Trantham, Matthew; Kuranz, Carolyn; Fein, Jeff; Wan, Willow; Young, Rachel; Keiter, Paul; Drake, R. Paul

2015-11-01

Computer simulations can assist in the design and analysis of laboratory astrophysics experiments. The Center for Radiative Shock Hydrodynamics (CRASH) at the University of Michigan developed a code that has been used to design and analyze high-energy-density experiments on OMEGA, NIF, and other large laser facilities. This Eulerian code uses block-adaptive mesh refinement (AMR) with implicit multigroup radiation transport, electron heat conduction and laser ray tracing. This poster will demonstrate some of the experiments the CRASH code has helped design or analyze including: Kelvin-Helmholtz, Rayleigh-Taylor, magnetized flows, jets, and laser-produced plasmas. This work is funded by the following grants: DEFC52-08NA28616, DE-NA0001840, and DE-NA0002032.

Charge transport in electrically doped amorphous organic semiconductors.

Science.gov (United States)

Yoo, Seung-Jun; Kim, Jang-Joo

2015-06-01

This article reviews recent progress on charge generation by doping and its influence on the carrier mobility in organic semiconductors (OSs). The doping induced charge generation efficiency is generally low in OSs which was explained by the integer charge transfer model and the hybrid charge transfer model. The ionized dopants formed by charge transfer between hosts and dopants can act as Coulomb traps for mobile charges, and the presence of Coulomb traps in OSs broadens the density of states (DOS) in doped organic films. The Coulomb traps strongly reduce the carrier hopping rate and thereby change the carrier mobility, which was confirmed by experiments in recent years. In order to fully understand the doping mechanism in OSs, further quantitative and systematic analyses of charge transport characteristics must be accomplished. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Two-Plasmon Decay: Simulations and Experiments on the NIKE Laser System

Science.gov (United States)

Phillips, Lee; Weaver, J. L.; Oh, J.; Schmitt, A. J.; Obenschain, S.; Colombant, D.

2009-11-01

NIKE is a Krf laser system at the Naval Research Laboratory used to explore hydrodynamic stability, equation of state, and other issues arising in the research toward inertial fusion energy. The relatively small KrF wavelength, according to widely used theories, raises the threshold of most parametric instabilities. We report on simulations performed using the FAST3d radiation hydrocode to design TPD experiments. By post-processing the results of the simulations we have designed experiments that have explored the use of simple threshold formulas (from developing theories) and help establish the soundness of our simulational approach. Turning to the targets proposed for ICF energy research, we have found that among the designs for the proposed Fusion Test Facility (Obenschain et al., Phys. Plasmas 13 056320 (2006)), are some that are below LPI thresholds. We have also studied high-gain KrF shock ignition designs and found that they are below LPI thresholds for most of the implosion, becoming susceptible to TPD only late in the pulse.

Truth Seeded Reconstruction for Fast Simulation in the ATLAS Experiment

CERN Document Server

Jansky, Roland; Salzburger, Andreas

The huge success of the ATLAS experiment for particle physics during Run 1 of the LHC would not have been possible without the production of vast amounts of simulated Monte Carlo data. However, the very detailed detector simulation is a highly CPU intensive task and thus resource shortages occurred. Motivated by this, great effort has been put into speeding up the simulation. As a result, other timeconsuming parts became visible. One of which is the track reconstruction. This thesis describes one potential solution to the CPU intensive reconstruction of simulated data: a newly designed truth seeded reconstruction. At its basics is the idea to skip the pattern recognition altogether, instead utilizing the available (truth) information from simulation to directly fit particle trajectories without searching for them. At the same time tracking effects of the standard reconstruction need to be emulated. This approach is validated thoroughly and no critical deviations of the results compared to the standard reconst...

Simulation of hydrogen deflagration experiment – Benchmark exercise with lumped-parameter codes

Energy Technology Data Exchange (ETDEWEB)

Kljenak, Ivo, E-mail: ivo.kljenak@ijs.si [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Kuznetsov, Mikhail, E-mail: mike.kuznetsov@kit.edu [Karlsruhe Institute of Technology, Kaiserstraße 12, 76131 Karlsruhe (Germany); Kostka, Pal, E-mail: kostka@nubiki.hu [NUBIKI Nuclear Safety Research Institute, Konkoly-Thege Miklós út 29-33, 1121 Budapest (Hungary); Kubišova, Lubica, E-mail: lubica.kubisova@ujd.gov.sk [Nuclear Regulatory Authority of the Slovak Republic, Bajkalská 27, 82007 Bratislava (Slovakia); Maltsev, Mikhail, E-mail: maltsev_MB@aep.ru [JSC Atomenergoproekt, 1, st. Podolskykh Kursantov, Moscow (Russian Federation); Manzini, Giovanni, E-mail: giovanni.manzini@rse-web.it [Ricerca sul Sistema Energetico, Via Rubattino 54, 20134 Milano (Italy); Povilaitis, Mantas, E-mail: mantas.p@mail.lei.lt [Lithuania Energy Institute, Breslaujos g.3, 44403 Kaunas (Lithuania)

2015-03-15

Highlights: • Blind and open simulations of hydrogen combustion experiment in large-scale containment-like facility with different lumped-parameter codes. • Simulation of axial as well as radial flame propagation. • Confirmation of adequacy of lumped-parameter codes for safety analyses of actual nuclear power plants. - Abstract: An experiment on hydrogen deflagration (Upward Flame Propagation Experiment – UFPE) was proposed by the Jozef Stefan Institute (Slovenia) and performed in the HYKA A2 facility at the Karlsruhe Institute of Technology (Germany). The experimental results were used to organize a benchmark exercise for lumped-parameter codes. Six organizations (JSI, AEP, LEI, NUBIKI, RSE and UJD SR) participated in the benchmark exercise, using altogether four different computer codes: ANGAR, ASTEC, COCOSYS and ECART. Both blind and open simulations were performed. In general, all the codes provided satisfactory results of the pressure increase, whereas the results of the temperature show a wider dispersal. Concerning the flame axial and radial velocities, the results may be considered satisfactory, given the inherent simplification of the lumped-parameter description compared to the local instantaneous description.

Experiments and numerical simulations of fluctuating thermal stratification in a branch pipe

Energy Technology Data Exchange (ETDEWEB)

Nakamura, Akira; Murase, Michio; Sasaki, Toru [Inst. of Nuclear Safety System Inc., Mihama, Fukui (Japan); Takenaka, Nobuyuki; Hamatani, Daisuke [Kobe Univ. (Japan)

2002-09-01

Many pipes branch off from the main pipe in plants. When the main flow in the main pipe is hotter than a branch pipe that branches off downward, the hot water penetrates into the branch pipe with the cavity flow that is induced by the main flow and causes thermal stratification. If the interface of the stratification fluctuates in an occluded branch pipe, thermal fatigue may occur in pipe wall. Some experiments and numerical simulations were conducted to elucidate the mechanism of this fluctuating thermal stratification. The vortex structures were observed in the experiments of straight or bent branch pipes. When the main flow was heated and the thermal stratification interface was at the elbow, a ''burst'' phenomenon occurred in the interface in connection with large heat fluctuation. The effects of pipe shape on the length of penetration were investigated in order to modify simulation conditions. The vortex structures and the fluctuating thermal stratification at elbow in the numerical simulation showed good agreement with experiments. (author)

Simulation of hydrogen deflagration experiment – Benchmark exercise with lumped-parameter codes

International Nuclear Information System (INIS)

Kljenak, Ivo; Kuznetsov, Mikhail; Kostka, Pal; Kubišova, Lubica; Maltsev, Mikhail; Manzini, Giovanni; Povilaitis, Mantas

2015-01-01

Highlights: • Blind and open simulations of hydrogen combustion experiment in large-scale containment-like facility with different lumped-parameter codes. • Simulation of axial as well as radial flame propagation. • Confirmation of adequacy of lumped-parameter codes for safety analyses of actual nuclear power plants. - Abstract: An experiment on hydrogen deflagration (Upward Flame Propagation Experiment – UFPE) was proposed by the Jozef Stefan Institute (Slovenia) and performed in the HYKA A2 facility at the Karlsruhe Institute of Technology (Germany). The experimental results were used to organize a benchmark exercise for lumped-parameter codes. Six organizations (JSI, AEP, LEI, NUBIKI, RSE and UJD SR) participated in the benchmark exercise, using altogether four different computer codes: ANGAR, ASTEC, COCOSYS and ECART. Both blind and open simulations were performed. In general, all the codes provided satisfactory results of the pressure increase, whereas the results of the temperature show a wider dispersal. Concerning the flame axial and radial velocities, the results may be considered satisfactory, given the inherent simplification of the lumped-parameter description compared to the local instantaneous description

Agglomeration processes in carbonaceous dusty plasmas, experiments and numerical simulations

International Nuclear Information System (INIS)

Dap, S; Hugon, R; De Poucques, L; Bougdira, J; Lacroix, D; Patisson, F

2010-01-01

This paper deals with carbon dust agglomeration in radio frequency acetylene/argon plasma. Two studies, an experimental and a numerical one, were carried out to model dust formation mechanisms. Firstly, in situ transmission spectroscopy of dust clouds in the visible range was performed in order to observe the main features of the agglomeration process of the produced carbonaceous dust. Secondly, numerical simulation tools dedicated to understanding the achieved experiments were developed. A first model was used for the discretization of the continuous population balance equations that characterize the dust agglomeration process. The second model is based on a Monte Carlo ray-tracing code coupled to a Mie theory calculation of dust absorption and scattering parameters. These two simulation tools were used together in order to numerically predict the light transmissivity through a dusty plasma and make comparisons with experiments.

Mechanical Contact Experiments and Simulations

DEFF Research Database (Denmark)

Nielsen, Chris Valentin; Martins, P; Zhang, W.

2011-01-01

Mechanical contact is studied under dynamic development by means of a combined numerical and experimental investigation. The experiments are designed to allow dynamical development of non-planar contact areas with significant expansion in all three directions as the load is increased. Different....... The overall investigation serves for testing and validating the numerical implementation of the mechanical contact, which is one of the main contributions to a system intended for 3D simulation of resistance welding. Correct modelling of contact between parts to be welded, as well as contact with electrodes......, is crucial for satisfactory modelling of the resistance welding process. The resistance heating at the contact interfaces depends on both contact area and pressure, and as the contact areas develop dynamically, the presented tests are relevant for assessing the validity and accuracy of the mechanical contact...

Filament winding technique, experiment and simulation analysis on tubular structure

Science.gov (United States)

Quanjin, Ma; Rejab, M. R. M.; Kaige, Jiang; Idris, M. S.; Harith, M. N.

2018-04-01

Filament winding process has emerged as one of the potential composite fabrication processes with lower costs. Filament wound products involve classic axisymmetric parts (pipes, rings, driveshafts, high-pressure vessels and storage tanks), non-axisymmetric parts (prismatic nonround sections and pipe fittings). Based on the 3-axis filament winding machine has been designed with the inexpensive control system, it is completely necessary to make a relative comparison between experiment and simulation on tubular structure. In this technical paper, the aim of this paper is to perform a dry winding experiment using the 3-axis filament winding machine and simulate winding process on the tubular structure using CADWIND software with 30°, 45°, 60° winding angle. The main result indicates that the 3-axis filament winding machine can produce tubular structure with high winding pattern performance with different winding angle. This developed 3-axis winding machine still has weakness compared to CAWIND software simulation results with high axes winding machine about winding pattern, turnaround impact, process error, thickness, friction impact etc. In conclusion, the 3-axis filament winding machine improvements and recommendations come up with its comparison results, which can intuitively understand its limitations and characteristics.

A second simulated criticality accident dosimetry experiment

CERN Document Server

Adams, N

1973-01-01

This experiment was undertaken to facilitate training in criticality dose assessment by UKAEA and BNFL establishments with potential criticality hazards. Personal dosemeters, coins, samples of hair, etc. supplied by the seven participating establishments were attached to a man-phantom filled with a solution of sodium nitrate (simulating 'body-sodium'), and exposed to a burst of radiation from the AWRE pulsed reactor VIPER. The neutron and photon doses were each several hundred rads. Participants made two sets of dose assessments. The first, made solely from the evidence of their routine dosemeters the activation of body-sodium and standard monitoring data, simulated the initial dose assessment that would be made before the circumstances of a real incident were established. The second was made when the position and orientation of the phantom relative to the reactor and the shielding (20 cm of copper) between the reactor core and the phantom were disclosed. Neutron and photon dose assessments for comparison wit...

Nucleic acid polymeric properties and electrostatics: Directly comparing theory and simulation with experiment.

Science.gov (United States)

Sim, Adelene Y L

2016-06-01

Nucleic acids are biopolymers that carry genetic information and are also involved in various gene regulation functions such as gene silencing and protein translation. Because of their negatively charged backbones, nucleic acids are polyelectrolytes. To adequately understand nucleic acid folding and function, we need to properly describe its i) polymer/polyelectrolyte properties and ii) associating ion atmosphere. While various theories and simulation models have been developed to describe nucleic acids and the ions around them, many of these theories/simulations have not been well evaluated due to complexities in comparison with experiment. In this review, I discuss some recent experiments that have been strategically designed for straightforward comparison with theories and simulation models. Such data serve as excellent benchmarks to identify limitations in prevailing theories and simulation parameters. Copyright © 2015 Elsevier B.V. All rights reserved.

Use of Simulation Learning Experiences in Physical Therapy Entry-to-Practice Curricula: A Systematic Review

Science.gov (United States)

Carnahan, Heather; Herold, Jodi

2015-01-01

ABSTRACT Purpose: To review the literature on simulation-based learning experiences and to examine their potential to have a positive impact on physiotherapy (PT) learners' knowledge, skills, and attitudes in entry-to-practice curricula. Method: A systematic literature search was conducted in the MEDLINE, CINAHL, Embase Classic+Embase, Scopus, and Web of Science databases, using keywords such as physical therapy, simulation, education, and students. Results: A total of 820 abstracts were screened, and 23 articles were included in the systematic review. While there were few randomized controlled trials with validated outcome measures, some discoveries about simulation can positively affect the design of the PT entry-to-practice curricula. Using simulators to provide specific output feedback can help students learn specific skills. Computer simulations can also augment students' learning experience. Human simulation experiences in managing the acute patient in the ICU are well received by students, positively influence their confidence, and decrease their anxiety. There is evidence that simulated learning environments can replace a portion of a full-time 4-week clinical rotation without impairing learning. Conclusions: Simulation-based learning activities are being effectively incorporated into PT curricula. More rigorously designed experimental studies that include a cost–benefit analysis are necessary to help curriculum developers make informed choices in curriculum design. PMID:25931672

Flow-induced vibration analysis of a helical coil steam generator experiment using large eddy simulation

Energy Technology Data Exchange (ETDEWEB)

Yuan, Haomin; Solberg, Jerome; Merzari, Elia; Kraus, Adam; Grindeanu, Iulian

2017-10-01

This paper describes a numerical study of flow-induced vibration in a helical coil steam generator experiment conducted at Argonne National Laboratory in the 1980s. In the experiment, a half-scale sector model of a steam generator helical coil tube bank was subjected to still and flowing air and water, and the vibrational characteristics were recorded. The research detailed in this document utilizes the multi-physics simulation toolkit SHARP developed at Argonne National Laboratory, in cooperation with Lawrence Livermore National Laboratory, to simulate the experiment. SHARP uses the spectral element code Nek5000 for fluid dynamics analysis and the finite element code DIABLO for structural analysis. The flow around the coil tubes is modeled in Nek5000 by using a large eddy simulation turbulence model. Transient pressure data on the tube surfaces is sampled and transferred to DIABLO for the structural simulation. The structural response is simulated in DIABLO via an implicit time-marching algorithm and a combination of continuum elements and structural shells. Tube vibration data (acceleration and frequency) are sampled and compared with the experimental data. Currently, only one-way coupling is used, which means that pressure loads from the fluid simulation are transferred to the structural simulation but the resulting structural displacements are not fed back to the fluid simulation

Event-by-event simulation of nonclassical effects in two-photon interference experiments

NARCIS (Netherlands)

Michielsen, K.; Jin, F.; Delina, M.; Raedt, H. De

2012-01-01

A corpuscular simulation model for second-order intensity interference phenomena is discussed. It is shown that both the visibility V = 1/2 predicted for two-photon interference experiments with two independent sources and the visibility V = 1 predicted for two-photon interference experiments with a

Phet simulator and the table teaching in basic education: experience report

Directory of Open Access Journals (Sweden)

Lilian de Fatima Oliveira Falchi

2018-06-01

Full Text Available This research was developed with the purpose of encouraging elementary school teachers to use the PhET simulator with their students as a means to enhance the learning of the table. The simulator is a learning facilitator, which aims to develop simulations for teaching science, mathematics, physics and chemistry. This paper reports the use of the simulator with the students of the third year of elementary school, applied under the joint supervision by the researchers and the schoolteachers. The use of the simulator with the students occurred in September and October of 2016 with weekly classes. Those were practical classes in the school’s computer lab, where students were able to explore the simulator as well as advance the phases according to their performance. This experience helped to understand the need to transform education and incorporate digital technology into teaching / learning to motivate and facilitate learning.

Ethical reasoning through simulation: a phenomenological analysis of student experience.

Science.gov (United States)

Lewis, Gareth; McCullough, Melissa; Maxwell, Alexander P; Gormley, Gerard J

2016-01-01

Medical students transitioning into professional practice feel underprepared to deal with the emotional complexities of real-life ethical situations. Simulation-based learning (SBL) may provide a safe environment for students to probe the boundaries of ethical encounters. Published studies of ethics simulation have not generated sufficiently deep accounts of student experience to inform pedagogy. The aim of this study was to understand students' lived experiences as they engaged with the emotional challenges of managing clinical ethical dilemmas within a SBL environment. This qualitative study was underpinned by an interpretivist epistemology. Eight senior medical students participated in an interprofessional ward-based SBL activity incorporating a series of ethically challenging encounters. Each student wore digital video glasses to capture point-of-view (PoV) film footage. Students were interviewed immediately after the simulation and the PoV footage played back to them. Interviews were transcribed verbatim. An interpretative phenomenological approach, using an established template analysis approach, was used to iteratively analyse the data. Four main themes emerged from the analysis: (1) 'Authentic on all levels?', (2)'Letting the emotions flow', (3) 'Ethical alarm bells' and (4) 'Voices of children and ghosts'. Students recognised many explicit ethical dilemmas during the SBL activity but had difficulty navigating more subtle ethical and professional boundaries. In emotionally complex situations, instances of moral compromise were observed (such as telling an untruth). Some participants felt unable to raise concerns or challenge unethical behaviour within the scenarios due to prior negative undergraduate experiences. This study provided deep insights into medical students' immersive and embodied experiences of ethical reasoning during an authentic SBL activity. By layering on the human dimensions of ethical decision-making, students can understand their

Are water simulation models consistent with steady-state and ultrafast vibrational spectroscopy experiments?

International Nuclear Information System (INIS)

Schmidt, J.R.; Roberts, S.T.; Loparo, J.J.; Tokmakoff, A.; Fayer, M.D.; Skinner, J.L.

2007-01-01

Vibrational spectroscopy can provide important information about structure and dynamics in liquids. In the case of liquid water, this is particularly true for isotopically dilute HOD/D 2 O and HOD/H 2 O systems. Infrared and Raman line shapes for these systems were measured some time ago. Very recently, ultrafast three-pulse vibrational echo experiments have been performed on these systems, which provide new, exciting, and important dynamical benchmarks for liquid water. There has been tremendous theoretical effort expended on the development of classical simulation models for liquid water. These models have been parameterized from experimental structural and thermodynamic measurements. The goal of this paper is to determine if representative simulation models are consistent with steady-state, and especially with these new ultrafast, experiments. Such a comparison provides information about the accuracy of the dynamics of these simulation models. We perform this comparison using theoretical methods developed in previous papers, and calculate the experimental observables directly, without making the Condon and cumulant approximations, and taking into account molecular rotation, vibrational relaxation, and finite excitation pulses. On the whole, the simulation models do remarkably well; perhaps the best overall agreement with experiment comes from the SPC/E model

Brownfield Action: An education through an environmental science simulation experience for undergraduates

Science.gov (United States)

Kelsey, Ryan Daniel

Brownfield Action is a computer simulation experience used by undergraduates in an Introduction to Environmental Science course for non-science majors at Barnard College. Students play the role of environmental consultants given the semester-long task of investigating a potentially contaminated landsite in a simulated town. The simulation serves as the integration mechanism for the entire course. The project is a collaboration between Professor Bower and the Columbia University Center for New Media Teaching and Learning (CCNMTL). This study chronicles the discovery, design, development, implementation, and evaluation of this project over its four-year history from prototype to full-fledged semester-long integrated lecture and lab experience. The complete project history serves as a model for the development of best practices in contributing to the field of educational technology in higher education through the study of fully designed and implemented projects in real classrooms. Recommendations from the project focus on linking the laboratory and lecture portions of a course, the use of simulations (especially for novice students), instructor adaptation to the use of technology, general educational technology project development, and design research, among others. Findings from the study also emphasize the uniqueness of individual student's growth through the experience, and the depth of understanding that can be gained from embracing the complexity of studying sophisticated learning environments in real classrooms.

A review of the findings of the plasma diagnostic package and associated laboratory experiments: Implications of large body/plasma interactions for future space technology

Science.gov (United States)

Murphy, Gerald B.; Lonngren, Karl E.

1986-01-01

The discoveries and experiments of the Plasma Diagnostic Package (PDP) on the OSS 1 and Spacelab 2 missions are reviewed, these results are compared with those of other space and laboratory experiments, and the implications for the understanding of large body interactions in a low Earth orbit (LEO) plasma environment are discussed. First a brief review of the PDP investigation, its instrumentation and experiments is presented. Next a summary of PDP results along with a comparison of those results with similar space or laboratory experiments is given. Last of all the implications of these results in terms of understanding fundamental physical processes that take place with large bodies in LEO is discussed and experiments to deal with these vital questions are suggested.

Magnetic insulation of high voltages in vacuum: comparison of experiment with simulations

International Nuclear Information System (INIS)

Bergeron, K.D.; Poukey, J.W.; Di Capua, M.S.; Pellinen, D.G.

1978-01-01

Experiments on long magnetically insulated vacuum transmission lines at the 700 kV/cm level have been analyzed by comparing with computer simulations. The particle-in-cell code used is 2-D, time-dependent and, like the experiments, coaxial cylindrical. Comparison could be made with current monitors at three intermediate longitudinal positions at both the outer electrode (for total current) and the inner electrode (for boundary current). The overall agreement was quite good, though the measured boundary current was consistently about 22 percent lower than the simulation values. In addition, a detailed comparison of the radial variation of several time-averaged quantities from the simulation was made with the predictions of the parapotential theory. It was found that the electric potential was very similar in the two cases, but the charge and current densities were not

Pre-test simulations of laboratory-scale heater experiments in tuff. Yucca Mountain Site Characterization Project

International Nuclear Information System (INIS)

Ho, Clifford K.

1995-09-01

Laboratory-scale heater experiments are Proposed to observe thermohydrologic Processes in tuffaceous rock using existing equipment and x-ray imaging techniques. The purpose of the experiments is to gain understanding of the near-field behavior and thermodynamic environment surrounding a heat source. As a prelude to these experiments, numerical simulations are performed to determine design-related parameters such as optimal heating power and heating duration. In addition, the simulations aid in identifying and understanding thermal processes and mechanisms that may occur under a variety of experimental conditions. Results of the simulations show that convection may play an important role in the heat transfer and thermodynamic environment of the heater if the Rayleigh-Darcy number exceeds a critical value (= 10 for the laboratory experiments) depending on the type of backfill material within the annulus (or drift)

Simulation experiment on total ionization dose effects of linear CCD

International Nuclear Information System (INIS)

Tang Benqi; Zhang Yong; Xiao Zhigang; Wang Zujun; Huang Shaoyan

2004-01-01

We carry out the ionization radiation experiment of linear CCDs operated in unbiased, biased, biased and driven mode respectively by Co-60 γ source with our self-designed test system, and offline test the Dark signal and Saturation voltage and SNR varied with total dose for TCD132D, and get some valuable results. On the basis of above work, we set forth a primary experiment approaches to simulate the total dose radiation effects of charge coupled devices. (authors)

Initial experience with AcQsim CT simulator

International Nuclear Information System (INIS)

Michalski, Jeff M.; Gerber, Russell; Bosch, Walter R.; Harms, William; Matthews, John W.; Purdy, James A.; Perez, Carlos A.

1995-01-01

Purpose: We recently replaced our university developed CT simulator prototype with a commercial grade spiral CT simulator (Picker AcQsim) that is networked with three independent virtual simulation workstations and our 3D radiation therapy planning (3D-RTP) system multiple workstations. This presentation will report our initial experience with this CT simulation device and define criteria for optimum clinical use as well as describe some potential drawbacks of the current system. Methods and Materials: Over a 10 month period, 210 patients underwent CT simulation using the AcQsim. An additional 127 patients had a volumetric CT scan done on the device with their CT data and target and normal tissue contours ultimately transferred to our 3D-RTP system. We currently perform the initial patient localization and immobilization in the CT simulation suite by using CT topograms and a fiducial laser marking system. Immobilization devices, required for all patients undergoing CT simulation, are constructed and registered to a device that defines the treatment table coordinates. Orthogonal anterior and lateral CT topograms document patient alignment and the position of a reference coordinate center. The volumetric CT scan with appropriate CT contrast materials administered is obtained while the patient is in the immobilization device. On average, more than 100 CT slices are obtained per study. Contours defining tumor, target, and normal tissues are drawn on a slice by slice basis. Isocenter definition can be automatically defined within the target volume and marked on the patient and immobilization device before leaving the initial CT simulation session. Virtual simulation is then performed on the patient data set with the assistance of predefined target volumes and normal tissue contours displayed on rapidly computed digital reconstructed radiographs (DRRs) in a manner similar to a conventional fluoroscopic radiotherapy simulator. Lastly, a verification simulation is

Systematic simulation of a tubular recycle reactor on the basis of pilot plant experiments

Energy Technology Data Exchange (ETDEWEB)

Paar, H; Narodoslawsky, M; Moser, A [Technische Univ., Graz (Austria). Inst. fuer Biotechnologie, Mikrobiologie und Abfalltechnologie

1990-10-10

Systematic simulatiom may decisively help in development and optimization of bioprocesses. By applying simulation techniques, optimal use can be made of experimental data, decreasing development costs and increasing the accuracy in predicting the behavior of an industrial scale plant. The procedure of the dialogue between simulation and experimental efforts will be exemplified in a case study. Alcoholic fermentation of glucose by zymomonas mobilis bacteria in a gasified turbular recycle reactor was studied first by systematic simulation, using a computer model based solely on literature data. On the base of the results of this simulation, a 0.013 m{sup 3} pilot plant reactor was constructed. The pilot plant experiments, too, were based on the results of the systematic simulation. Simulated and experimental data were well in agreement. The pilot plant experiments reiterated the trends and limits of the process as shown by the simulation results. Data from the pilot plant runs were then used to improve the simulation model. This improved model was subsequently used to simulate the performances of an industrial scale plant. The results of this simulation are presented. They show that the alcohol fermentation in a tubular recycle reactor is potentially advantageous to other reactor configurations, especially to continuous stirred tanks. (orig.).

A simulation toolkit for electroluminescence assessment in rare event experiments

CERN Document Server

Oliveira, C A B; Veenhof, R; Biagi, S; Monteiro, C M B; Santos, J M F dos; Ferreira, A L; Veloso, J F C A

2011-01-01

A good understanding of electroluminescence is a prerequisite when optimising double-phase noble gas detectors for Dark Matter searches and high-pressure xenon TPCs for neutrinoless double beta decay detection. A simulation toolkit for calculating the emission of light through electron impact on neon, argon, krypton and xenon has been developed using the Magboltz and Garfield programs. Calculated excitation and electroluminescence efficiencies, electroluminescence yield and associated statistical fluctuations are presented as a function of electric field. Good agreement with experiment and with Monte Carlo simulations has been obtained.

Experiment on thermohydraulics of simulated control rod

International Nuclear Information System (INIS)

Ogawa, Masuro; Ouchi, Mitsuo; Akino, Norio; Fujimura, Kaoru; Shiina, Yasuaki; Kawamura, Hiroshi

1984-10-01

A thermohydraulic study of a control rod channel is required for the core design of the Very High Temperature Gas Cooled Reactor (VHTR). A non-heating experiment with air flow was performed prior to heating experiment with helium flow. Experimental results on stability of flow, flow rate distribution and pressure drop of the control rod channel are reported. In a test section of the experimental apparatus, five simulated control subrods were suspended vertically in a circular duct. Their dimension was in coincide with those of the Detailed Disign (I) of the VHTR. Air of atomospheric pressure was used as a coolant gas, which flowed in inner and outer paths of the subrods. Total flow rate ranged from 0.0011 to 0.0062 kg/s. Flow rate distribution and pressure drop were obtained for various flow rates. Velocity fluctuation in the channel was also observed using a hot wire anemometer. From these experiments, it was found that the flow rate distribution was nearly the same as a disigned value and that turbulent and laminar flows were simultaneously realized in outer and inner paths respectively. These observations supported a feasibility of the present design. (author)

Results of the Simulation and Assimilation of Doppler Wind Lidar Observations in Preparation for European Space Agency's Aeolus Mission

Science.gov (United States)

McCarty, Will

2011-01-01

With the launch of the European Space Agency's Aeolus Mission in 2013, direct spaceborne measurements of vertical wind profiles are imminent via Doppler wind lidar technology. Part of the preparedness for such missions is the development of the proper data assimilation methodology for handling such observations. Since no heritage measurements exist in space, the Joint Observing System Simulation Experiment (Joint OSSE) framework has been utilized to generate a realistic proxy dataset as a precursor to flight. These data are being used for the development of the Gridpoint Statistical Interpolation (GSI) data assimilation system utilized at a number of centers through the United States including the Global Modeling and Assimilation Office (GMAO) at NASA/Goddard Space Flight Center and at the National Centers for Environmental Prediction (NOAA/NWS/NCEP) as an activity through the Joint Center for Satellite Data Assimilation. An update of this ongoing effort will be presented, including the methodology of proxy data generation, the limitations of the proxy data, the handling of line-of-sight wind measurements within the GSI, and the impact on both analyses and forecasts with the addition of the new data type.

Crisis Management Simulation: Establishing a Dual Neurosurgery and Anesthesia Training Experience.

Science.gov (United States)

Ciporen, Jeremy; Gillham, Haley; Noles, Michele; Dillman, Dawn; Baskerville, Mark; Haley, Caleb; Spight, Donn; Turner, Ryan C; Lucke-Wold, Brandon P

2018-01-01

Simulation training has been shown to be an effective teaching tool. Learner management of an intraoperative crisis such as a major cerebrovascular bleed requires effective teamwork, communication, and implementation of key skill sets at appropriate time points. This study establishes a first of a kind simulation experience in a neurosurgery/anesthesia resident (learners) team working together to manage an intraoperative crisis. Using a cadaveric cavernous carotid injury perfusion model, 7 neurosurgery and 6 anesthesia learners, were trained on appropriate vascular injury management using an endonasal endoscopic technique. Learners were evaluated on communication skills, crisis management algorithms, and implementation of appropriate skill sets at the right time. A preanatomic and postanatomic examination and postsimulation survey was administered to neurosurgery learners. Anesthesia learners provided posttraining evaluation through a tailored realism and teaching survey. Neurosurgery learners' anatomic examination score improved from presimulation (33.89%) to postsimulation (86.11%). No significant difference between learner specialties was observed for situation awareness, decision making, communications and teamwork, or leadership evaluations. Learners reported the simulation realistic, beneficial, and highly instructive. Realistic, first of kind, clinical simulation scenarios were presented to a neurosurgery/anesthesia resident team who worked together to manage an intraoperative crisis. Learners were effectively trained on crisis management, the importance of communication, and how to develop algorithms for future implementation in difficult scenarios. Learners were highly satisfied with the simulation training experience and requested that it be integrated more consistently into their residency training programs.

Perceptions, training experiences, and preferences of surgical residents toward laparoscopic simulation training: a resident survey.

Science.gov (United States)

Shetty, Shohan; Zevin, Boris; Grantcharov, Teodor P; Roberts, Kurt E; Duffy, Andrew J

2014-01-01

Simulation training for surgical residents can shorten learning curves, improve technical skills, and expedite competency. Several studies have shown that skills learned in the simulated environment are transferable to the operating room. Residency programs are trying to incorporate simulation into the resident training curriculum to supplement the hands-on experience gained in the operating room. Despite the availability and proven utility of surgical simulators and simulation laboratories, they are still widely underutilized by surgical trainees. Studies have shown that voluntary use leads to minimal participation in a training curriculum. Although there are several simulation tools, there is no clear evidence of the superiority of one tool over the other in skill acquisition. The purpose of this study was to explore resident perceptions, training experiences, and preferences regarding laparoscopic simulation training. Our goal was to profile resident participation in surgical skills simulation, recognize potential barriers to voluntary simulator use, and identify simulation tools and tasks preferred by residents. Furthermore, this study may help to inform whether mandatory/protected training time, as part of the residents' curriculum is essential to enhance participation in the simulation laboratory. A cross-sectional study on general surgery residents (postgraduate years 1-5) at Yale University School of Medicine and the University of Toronto via an online questionnaire was conducted. Overall, 67 residents completed the survey. The institutional review board approved the methods of the study. Overall, 95.5% of the participants believed that simulation training improved their laparoscopic skills. Most respondents (92.5%) perceived that skills learned during simulation training were transferrable to the operating room. Overall, 56.7% of participants agreed that proficiency in a simulation curriculum should be mandatory before operating room experience. The

Integrating open-source software applications to build molecular dynamics systems.

Science.gov (United States)

Allen, Bruce M; Predecki, Paul K; Kumosa, Maciej

2014-04-05

Three open-source applications, NanoEngineer-1, packmol, and mis2lmp are integrated using an open-source file format to quickly create molecular dynamics (MD) cells for simulation. The three software applications collectively make up the open-source software (OSS) suite known as MD Studio (MDS). The software is validated through software engineering practices and is verified through simulation of the diglycidyl ether of bisphenol-a and isophorone diamine (DGEBA/IPD) system. Multiple simulations are run using the MDS software to create MD cells, and the data generated are used to calculate density, bulk modulus, and glass transition temperature of the DGEBA/IPD system. Simulation results compare well with published experimental and numerical results. The MDS software prototype confirms that OSS applications can be analyzed against real-world research requirements and integrated to create a new capability. Copyright © 2014 Wiley Periodicals, Inc.

Intern as Patient: A Patient Experience Simulation to Cultivate Empathy in Emergency Medicine Residents

Directory of Open Access Journals (Sweden)

Sara W. Nelson

2017-12-01

Full Text Available Introduction Prior work links empathy and positive physician-patient relationships to improved healthcare outcomes. The objective of this study was to analyze a patient experience simulation for emergency medicine (EM interns as a way to teach empathy and conscientious patient care. Methods We conducted a qualitative descriptive study on an in situ, patient experience simulation held during EM residency orientation. Half the interns were patients brought into the emergency department (ED by ambulance and half were family members. Interns then took part in focus groups that discussed the experience. Data collected during these focus groups were coded by two investigators using a grounded theory approach and constant comparative methodology. Results We identified 10 major themes and 28 subthemes in the resulting qualitative data. Themes were in three broad categories: the experience as a patient or family member in the ED; application to current clinical practice; and evaluation of the exercise itself. Interns experienced firsthand the physical discomfort, emotional stress and confusion patients and families endure during the ED care process. They reflected on lessons learned, including the importance of good communication skills, frequent updates on care and timing, and being responsive to the needs and concerns of patients and families. All interns felt this was a valuable orientation experience. Conclusion Conducting a patient experience simulation may be a practical and effective way to develop empathy in EM resident physicians. Additional research evaluating the effect of participation in the simulation over a longer time period and assessing the effects on residents’ actual clinical care is warranted.

Characterization of a CLYC detector and validation of the Monte Carlo Simulation by measurement experiments

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyun Suk; Ye, Sung Joon [Seoul National University, Seoul (Korea, Republic of); Smith, Martin B.; Koslowsky, Martin R. [Bubble Technology Industries Inc., Chalk River (Canada); Kwak, Sung Woo [Korea Institute of Nuclear Nonproliferation And Control (KINAC), Daejeon (Korea, Republic of); Kim Gee Hyun [Sejong University, Seoul (Korea, Republic of)

2017-03-15

Simultaneous detection of neutrons and gamma rays have become much more practicable, by taking advantage of good gamma-ray discrimination properties using pulse shape discrimination (PSD) technique. Recently, we introduced a commercial CLYC system in Korea, and performed an initial characterization and simulation studies for the CLYC detector system to provide references for the future implementation of the dual-mode scintillator system in various studies and applications. We evaluated a CLYC detector with 95% 6Li enrichment using various gamma-ray sources and a 252Cf neutron source, with validation of our Monte Carlo simulation results via measurement experiments. Absolute full-energy peak efficiency values were calculated for gamma-ray sources and neutron source using MCNP6 and compared with measurement experiments of the calibration sources. In addition, behavioral characteristics of neutrons were validated by comparing simulations and experiments on neutron moderation with various polyethylene (PE) moderator thicknesses. Both results showed good agreements in overall characteristics of the gamma and neutron detection efficiencies, with consistent ⁓20% discrepancy. Furthermore, moderation of neutrons emitted from {sup 252}Cf showed similarities between the simulation and the experiment, in terms of their relative ratios depending on the thickness of the PE moderator. A CLYC detector system was characterized for its energy resolution and detection efficiency, and Monte Carlo simulations on the detector system was validated experimentally. Validation of the simulation results in overall trend of the CLYC detector behavior will provide the fundamental basis and validity of follow-up Monte Carlo simulation studies for the development of our dual-particle imager using a rotational modulation collimator.

Stress induced conditioning and thermal relaxation in the simulation of quasi-static compression experiments

International Nuclear Information System (INIS)

Scalerandi, M; Delsanto, P P; Johnson, P A

2003-01-01

Local interaction simulation approach simulations of the ultrasonic wave propagation in multi-grained materials have succeeded in reproducing most of the recently observed nonclassical nonlinear effects, such as stress-strain hysteresis and discrete memory in quasi-static experiments and a downwards shift of the resonance frequency and the generation of odd harmonics at specific amplitude rates in dynamics experiments. By including a simple mechanism of thermally activated random transitions, we can predict the occurrence of experimentally observed effects, such as the conditioning and relaxation of the specimen. Experiments are also suggested for a quantitative assessment of the validity of the model

Stress induced conditioning and thermal relaxation in the simulation of quasi-static compression experiments

CERN Document Server

Scalerandi, M; Johnson, P A

2003-01-01

Local interaction simulation approach simulations of the ultrasonic wave propagation in multi-grained materials have succeeded in reproducing most of the recently observed nonclassical nonlinear effects, such as stress-strain hysteresis and discrete memory in quasi-static experiments and a downwards shift of the resonance frequency and the generation of odd harmonics at specific amplitude rates in dynamics experiments. By including a simple mechanism of thermally activated random transitions, we can predict the occurrence of experimentally observed effects, such as the conditioning and relaxation of the specimen. Experiments are also suggested for a quantitative assessment of the validity of the model.

A horizontal vane radiometer: experiment, theory and simulation

OpenAIRE

Wolfe, David; Lazarra, Andres; Garcia, Alejandro

2015-01-01

The existence of two motive forces on a Crookes radiometer has complicated the investigation of either force independently. The thermal creep shear force in particular has been subject to differing interpretations of the direction in which it acts and its order of magnitude. In this article we provide a horizontal vane radiometer design which isolates the thermal creep shear force. The horizontal vane radiometer is explored through experiment, kinetic theory, and the Direct Simulation Monte C...

Numerical simulation of 2D ablation profile in CCI-2 experiment by moving particle semi-implicit method

Energy Technology Data Exchange (ETDEWEB)

Chai, Penghui, E-mail: phchai@vis.t.u-tokyo.ac.jp; Kondo, Masahiro; Erkan, Nejdet; Okamoto, Koji

2016-05-15

Highlights: • Multiphysics models were developed based on Moving Particle Semi-implicit method. • Mixing process, chemical reaction can be simulated in MCCI calculation. • CCI-2 experiment was simulated to validate the models. • Simulation and experimental results for sidewall ablation agree well. • Simulation results confirm the rapid erosion phenomenon observed in the experiment. - Abstract: Numerous experiments have been performed to explore the mechanisms of molten core-concrete interaction (MCCI) phenomena since the 1980s. However, previous experimental results show that uncertainties pertaining to several aspects such as the mixing process and crust behavior remain. To explore the mechanism governing such aspects, as well as to predict MCCI behavior in real severe accident events, a number of simulation codes have been developed for process calculations. However, uncertainties exist among the codes because of the use of different empirical models. In this study, a new computational code is developed using multiphysics models to simulate MCCI phenomena based on the moving particle semi-implicit (MPS) method. Momentum and energy equations are used to solve the velocity and temperature fields, and multiphysics models are developed on the basis of the basic MPS method. The CCI-2 experiment is simulated by applying the developed code. With respect to sidewall ablation, good agreement is observed between the simulation and experimental results. However, axial ablation is slower in the simulation, which is probably due to the underestimation of the enhancement effect of heat transfer provided by the moving bubbles at the bottom. In addition, the simulation results confirm the rapid erosion phenomenon observed in the experiment, which in the numerical simulation is explained by solutal convection provided by the liquid concrete at the corium/concrete interface. The results of the comparison of different model combinations show the effect of each

Simulation with GOTHIC of experiments Oxidation of fuel in Air

International Nuclear Information System (INIS)

Martinez-Murillo Mendez, J. C.

2012-01-01

In the present work has been addressed for the first time la simulation with the GOTHIC code, experiments oxidation and ignition of SFP in phase 1. This work represents a solid starting point for analysis of specific degradation of fuel in the pools of our facilities.

Audio-haptic interaction in simulated walking experiences

DEFF Research Database (Denmark)

Serafin, Stefania

2011-01-01

and interchangeable use of the haptic and auditory modality in floor interfaces, and for the synergy of perception and action in capturing and guiding human walking. We describe the technology developed in the context of this project, together with some experiments performed to evaluate the role of auditory......In this paper an overview of the work conducted on audio-haptic physically based simulation and evaluation of walking is provided. This work has been performed in the context of the Natural Interactive Walking (NIW) project, whose goal is to investigate possibilities for the integrated...... and haptic feedback in walking tasks....

Shocked materials at the intersection of experiment and simulation

Energy Technology Data Exchange (ETDEWEB)

Lorenzana, H. E.; Belak, J. F.; Bradley, K. S.; Bringa, E. M.; Budil, K. S.; Cazamias, J. U.; El-Dasher, B.; Hawreliak, J. A.; Hessler, J.; Kadau, K.; Kalantar, D. H.; McNaney, J. M.; Milathianaki, D.; Rosolankova, K.; Swift, D. C.; Taravillo, M.; Van Buuren, T. W.; Wark, J. S.; de la Rubia, T. Diaz

2008-04-01

Understanding the dynamic lattice response of solids under the extreme conditions of pressure, temperature and strain rate is a scientific quest that spans nearly a century. Critical to developing this understanding is the ability to probe and model the spatial and temporal evolution of the material microstructure and properties at the scale of the relevant physical phenomena-nanometers to micrometers and picoseconds to nanoseconds. While experimental investigations over this range of spatial and temporal scales were unimaginable just a decade ago, new technologies and facilities currently under development and on the horizon have brought these goals within reach for the first time. The equivalent advancements in simulation capabilities now mean that we can conduct simulations and experiments at overlapping temporal and spatial scales. In this article, we describe some of our studies which exploit existing and new generation ultrabright, ultrafast x-ray sources and large scale molecular dynamics simulations to investigate the real-time physical phenomena that control the dynamic response of shocked materials.

Shocked materials at the intersection of experiment and simulation

Energy Technology Data Exchange (ETDEWEB)

Kadau, Kai [Los Alamos National Laboratory

2008-01-01

Understanding the dynamic lattice response of solids under the extreme conditions of pressure, temperature and strain rate is a scientific quest that spans nearly a century. Critical to developing this understanding is the ability to probe and model the spatial and temporal evolution of the material microstructure and properties at the scale of the relevant physical phenomena -- nanometers to micrometers and picoseconds to nanoseconds. While experimental investigations over this range of spatial and temporal scales were unimaginable just a decade ago, new technologies and facilities currently under development and on the horizon have brought these goals within reach for the first time. The equivalent advancements in simulation capabilities now mean that we can conduct simulations and experiments at overlapping temporal and spatial scales. In this article, we describe some of our studies which exploit existing and new generation ultrabright, ultrafast x-ray sources and large scale molecular dynamics simulations to investigate the real-time physical phenomena that control the dynamic response of shocked materials.

High-fidelity simulation in Neonatology and the Italian experience of Nina

Directory of Open Access Journals (Sweden)

Armando Cuttano

2012-10-01

Full Text Available The modern methodology of simulation was born in the aeronautical field. In medicine, anesthetists showed great attention for technological advances and simulation, closely followed by surgeons with minimally invasive surgery. In Neonatology training in simulation is actually useful in order to face unexpected dramatic events, to minimize clinical risk preventing errors and to optimize team work. Critical issues in simulation are: teachers-learners relationship, focus on technical and non-technical skills, training coordination, adequate scenarios, effective debriefing. Therefore, the quality of a simulation training center is multi-factorial and is not only related to the mannequin equipment. High-fidelity simulation is the most effective method in education. In Italy simulation for education in Medicine has been used for a few years only. In Pisa we founded Nina (that is the acronymous for the Italian name of the Center, CeNtro di FormazIone e SimulazioNe NeonAtale, the first neonatal simulation center dedicated but integrated within a Hospital Unit in Italy. This paper describes how we manage education in Nina Center, in order to offer a model for other similar experiences.

Nuclear waste repository simulation experiments

International Nuclear Information System (INIS)

Rothfuchs, T.; Wieczorek, K.; Feddersen, H.K.; Staupendahl, G.; Coyle, A.J.; Kalia, H.; Eckert, J.

1986-12-01

This document is the third joint annual report on the Cooperative German-American 'Brine Migration Tests' that are in progress at the Asse salt mine in the Federal Republic of Germany (FRG). This Government supported mine serves as an underground test facility for research and development (R and D)-work in the field of nuclear waste repository research and simulation experiments. The tests are designed to simulate a nuclear waste repository to measure the effects of heat and gamma radiation on brine migration, salt decrepitation, disassociation of brine, and gases collected. The thermal mechanical behavior of salt, such as room closure, stresses and changes of the properties of salt are measured and compared with predicted behavior. This document covers the following sections: Issues and test objectives: This section presents issues that are investigated by the Brine Migration Test, and the test objectives derived from these issues; test site: This section describes the test site location and geology in the Asse mine; test description: A description of the test configuration, procedures, equipment, and instrumentation is given in this section; actual test chronology: The actual history of the test, in terms of the dates at which major activities occured, is presented in this section. Test results: This section presents the test results observed to data and the planned future work that is needed to complete the test; conclusions and recommendations: This section summarizes the conclusions derived to date regarding the Brine Migration Test. Additional work that would be useful to resolve the issues is discussed. (orig.)

Wireless Power Transfer Protocols in Sensor Networks: Experiments and Simulations

Directory of Open Access Journals (Sweden)

Sotiris Nikoletseas

2017-04-01

Full Text Available Rapid technological advances in the domain of Wireless Power Transfer pave the way for novel methods for power management in systems of wireless devices, and recent research works have already started considering algorithmic solutions for tackling emerging problems. In this paper, we investigate the problem of efficient and balanced Wireless Power Transfer in Wireless Sensor Networks. We employ wireless chargers that replenish the energy of network nodes. We propose two protocols that configure the activity of the chargers. One protocol performs wireless charging focused on the charging efficiency, while the other aims at proper balance of the chargers’ residual energy. We conduct detailed experiments using real devices and we validate the experimental results via larger scale simulations. We observe that, in both the experimental evaluation and the evaluation through detailed simulations, both protocols achieve their main goals. The Charging Oriented protocol achieves good charging efficiency throughout the experiment, while the Energy Balancing protocol achieves a uniform distribution of energy within the chargers.

Isotachophoresis of proteins in a networked microfluidic chip: experiment and 2-D simulation.

Science.gov (United States)

Cui, Huanchun; Dutta, Prashanta; Ivory, Cornelius F

2007-04-01

This paper reports both the experimental application and 2-D simulation of ITP of proteins in a networked microfluidic chip. Experiments demonstrate that a mixture of three fluorescent proteins can be concentrated and stacked into adjacent zones of pure protein under a constant voltage of 100 V over a 2 cm long microchannel. Measurements of the isotachophoretic velocity of the moving zones demonstrates that, during ITP under a constant voltage, the zone velocity decreases as more of the channel is occupied by the terminating electrolyte. A 2-D ITP model based on the Nernst-Planck equations illustrates the stacking and separation features of ITP using simulations of three virtual proteins. The self-sharpening behavior of ITP zones dispersed by a T-junction is clearly demonstrated both by experiment and by simulation. Comparison of 2-D simulations of ITP and zone electrophoresis (ZE) confirms that ZE lacks the ability to resharpen protein zones after they pass through a T-junction.

Haptic feedback improves surgeons' user experience and fracture reduction in facial trauma simulation.

Science.gov (United States)

Girod, Sabine; Schvartzman, Sara C; Gaudilliere, Dyani; Salisbury, Kenneth; Silva, Rebeka

2016-01-01

Computer-assisted surgical (CAS) planning tools are available for craniofacial surgery, but are usually based on computer-aided design (CAD) tools that lack the ability to detect the collision of virtual objects (i.e., fractured bone segments). We developed a CAS system featuring a sense of touch (haptic) that enables surgeons to physically interact with individual, patient-specific anatomy and immerse in a three-dimensional virtual environment. In this study, we evaluated initial user experience with our novel system compared to an existing CAD system. Ten surgery resident trainees received a brief verbal introduction to both the haptic and CAD systems. Users simulated mandibular fracture reduction in three clinical cases within a 15 min time limit for each system and completed a questionnaire to assess their subjective experience. We compared standard landmarks and linear and angular measurements between the simulated results and the actual surgical outcome and found that haptic simulation results were not significantly different from actual postoperative outcomes. In contrast, CAD results significantly differed from both the haptic simulation and actual postoperative results. In addition to enabling a more accurate fracture repair, the haptic system provided a better user experience than the CAD system in terms of intuitiveness and self-reported quality of repair.

An Educational Software for Simulating the Sample Size of Molecular Marker Experiments

Science.gov (United States)

Helms, T. C.; Doetkott, C.

2007-01-01

We developed educational software to show graduate students how to plan molecular marker experiments. These computer simulations give the students feedback on the precision of their experiments. The objective of the software was to show students using a hands-on approach how: (1) environmental variation influences the range of the estimates of the…

Simulation Experiment Description Markup Language (SED-ML Level 1 Version 2

Directory of Open Access Journals (Sweden)

Bergmann Frank T.

2015-06-01

Full Text Available The number, size and complexity of computational models of biological systems are growing at an ever increasing pace. It is imperative to build on existing studies by reusing and adapting existing models and parts thereof. The description of the structure of models is not sufficient to enable the reproduction of simulation results. One also needs to describe the procedures the models are subjected to, as recommended by the Minimum Information About a Simulation Experiment (MIASE guidelines.

Simulations of silicon vertex tracker for star experiment at RHIC

Energy Technology Data Exchange (ETDEWEB)

Odyniec, G.; Cebra, D.; Christie, W.; Naudet, C.; Schroeder, L.; Wilson, W. [Lawrence Berkeley Lab., CA (United States); Liko, D. [Institut fur Hochenenergiephysik, Vienna, (Austria); Cramer, J.; Prindle, D.; Trainor, T. [Univ. of Washington, Seattle (United States); Braithwaite, W. [Univ. of Arkansas, Little Rock (United States)

1991-12-31

The first computer simulations to optimize the Silicon Vertex Tracker (SVT) designed for the STAR experiment at RHIC are presented. The physics goals and the expected complexity of the events at RHIC dictate the design of a tracking system for the STAR experiment. The proposed tracking system will consist of a silicon vertex tracker (SVT) to locate the primary interaction and secondary decay vertices and to improve the momentum resolution, and a time projection chamber (TPC), positioned inside a solenoidal magnet, for continuous tracking.

Oversampling smoothness: an effective algorithm for phase retrieval of noisy diffraction intensities.

Science.gov (United States)

Rodriguez, Jose A; Xu, Rui; Chen, Chien-Chun; Zou, Yunfei; Miao, Jianwei

2013-04-01

Coherent diffraction imaging (CDI) is high-resolution lensless microscopy that has been applied to image a wide range of specimens using synchrotron radiation, X-ray free-electron lasers, high harmonic generation, soft X-ray lasers and electrons. Despite recent rapid advances, it remains a challenge to reconstruct fine features in weakly scattering objects such as biological specimens from noisy data. Here an effective iterative algorithm, termed oversampling smoothness (OSS), for phase retrieval of noisy diffraction intensities is presented. OSS exploits the correlation information among the pixels or voxels in the region outside of a support in real space. By properly applying spatial frequency filters to the pixels or voxels outside the support at different stages of the iterative process ( i.e. a smoothness constraint), OSS finds a balance between the hybrid input-output (HIO) and error reduction (ER) algorithms to search for a global minimum in solution space, while reducing the oscillations in the reconstruction. Both numerical simulations with Poisson noise and experimental data from a biological cell indicate that OSS consistently outperforms the HIO, ER-HIO and noise robust (NR)-HIO algorithms at all noise levels in terms of accuracy and consistency of the reconstructions. It is expected that OSS will find application in the rapidly growing CDI field, as well as other disciplines where phase retrieval from noisy Fourier magnitudes is needed. The MATLAB (The MathWorks Inc., Natick, MA, USA) source code of the OSS algorithm is freely available from http://www.physics.ucla.edu/research/imaging.

Simulation experience enhances physical therapist student confidence in managing a patient in the critical care environment.

Science.gov (United States)

Ohtake, Patricia J; Lazarus, Marcilene; Schillo, Rebecca; Rosen, Michael

2013-02-01

Rehabilitation of patients in critical care environments improves functional outcomes. This finding has led to increased implementation of intensive care unit (ICU) rehabilitation programs, including early mobility, and an associated increased demand for physical therapists practicing in ICUs. Unfortunately, many physical therapists report being inadequately prepared to work in this high-risk environment. Simulation provides focused, deliberate practice in safe, controlled learning environments and may be a method to initiate academic preparation of physical therapists for ICU practice. The purpose of this study was to examine the effect of participation in simulation-based management of a patient with critical illness in an ICU setting on levels of confidence and satisfaction in physical therapist students. A one-group, pretest-posttest, quasi-experimental design was used. Physical therapist students (N=43) participated in a critical care simulation experience requiring technical (assessing bed mobility and pulmonary status), behavioral (patient and interprofessional communication), and cognitive (recognizing a patient status change and initiating appropriate responses) skill performance. Student confidence and satisfaction were surveyed before and after the simulation experience. Students' confidence in their technical, behavioral, and cognitive skill performance increased from "somewhat confident" to "confident" following the critical care simulation experience. Student satisfaction was highly positive, with strong agreement the simulation experience was valuable, reinforced course content, and was a useful educational tool. Limitations of the study were the small sample from one university and a control group was not included. Incorporating a simulated, interprofessional critical care experience into a required clinical course improved physical therapist student confidence in technical, behavioral, and cognitive performance measures and was associated with high

Simulation of power maneuvering experiment of MASLWR test facility by MARS-KS code

Energy Technology Data Exchange (ETDEWEB)

Park, Ju Yeop [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2013-10-15

In the present study, KINS simulation result by the MARS-KS code (KS-002 version) for the SP-3 experiment is presented in detail and conclusion on MARS-KS code performance drawn through this simulation is described. Performance of the MARS-KS code is evaluated through the simulation of the power maneuvering experiment of the MASLWR test facility. Steady run shows the helical coil specific heat transfer model of the code is reasonable. However, identified discrepancy of the primary mass flowrate at transient run shows code performance for pressure drop needs to be improved considering sensitivity of the flowrate to the pressure drop at natural circulation. Since 2009, IAEA has conducted a research program entitled as ICSP (International Collaborative Standard Problem) on integral PWR design to evaluate current the state of the art of thermal-hydraulic code in simulating natural circulation flow within integral type reactor. In this ICSP, experimental data obtained from MASLWR (Multi-Application Small Light Water Reactor) test facility located at Oregon state university in the US have been simulated by various thermal-hydraulic codes of each participant of the ICSP and compared among others. MASLWR test facility is a mock-up of a passive integral type reactor equipped with helical coil steam generator. Since SMART reactor which is currently being developed in Korea also adopts a helical coil steam generator, Korea Institute of Nuclear Safety (KINS) has joined this ICSP to assess the applicability of a domestic regulatory audit thermal-hydraulic code (i. e. MARS-KS code) for the SMART reactor including wall-to-fluid heat transfer model modification based on independent international experiment data. In the ICSP, two types of transient experiments have been focused and they are loss of feedwater transient with subsequent ADS operation and long term cooling (SP-2) and normal operating conditions at different power levels (SP-3)

The Importance of External Support in the Adoption of Open Source Server Software

Science.gov (United States)

Ven, Kris; Verelst, Jan

IT managers seem to be hesitant to adopt OSS in the absence of professional support. Previous qualitative studies have indeed suggested that the availability of external support is important for the adoption of OSS. Therefore, we feel it is interesting to gain more insight into the role of external support in the adoption process. To this end, we performed a web survey involving 95 Belgian organizations. Our data suggests a balanced picture. As expected, our results show that the majority of organizations in our sample rely on commercial support such as vendor or third party support. Even organizations that have deployed OSS to a large extent—and that are therefore likely to have some experience and familiarity with OSS—rely on commercial support. Nevertheless, a considerable proportion of organizations indicated not to rely on commercial support, which suggests that internal expertise can be sufficient for successful adoption. Finally, and most surprisingly, we have found that the OSS community is used by a large proportion of organizations. This indicates that the OSS community is a valuable source of external support for organizations. Nevertheless, it appears that it is primarily used by organizations with a rather strong background in IT.

Simulation of the Quench-06 experiment with Scdapsim; Simulacion del experimento Quench-06 con Scdapsim

Energy Technology Data Exchange (ETDEWEB)

Angel M, E. del; Nunez C, A.; Amador G, R. [CNSNS, Dr. Barragan No. 779, 03020 Mexico D.F. (Mexico)]. e-mail: edangelm@cnsns.gob.mx

2003-07-01

The present work describes the pattern of the called Quench installation developed and used by the National Commission of Nuclear Security and Safeguards (CNSNS) for their participation in the International Standard Problem 45 (ISP), organized by the Nuclear Energy Agency (NEA). The exercise consisted on the simulation of the denominated experiment Quench-06 carried out in the experimental installation Quench located in the Forschungszentrum laboratory in Karlsruhe, Germany. The experiment Quench-06 consisted on simulating the sudden and late injection of water in a fuel assemble for a pressurized reactor (PWR). The CNSNS uses the version bd of the SCDAPSIM code developed by the company Innovative Software Systems (ISS) to simulate this experiment. The obtained results showed that the code is able to predict the experiment partially when overestimating the hydrogen production and of the partial fused of some fuel pellets, but predicting correctly the damage in the shroud. (Author)

Magnetic Compression Experiment at General Fusion with Simulation Results

Science.gov (United States)

Dunlea, Carl; Khalzov, Ivan; Hirose, Akira; Xiao, Chijin; Fusion Team, General

2017-10-01

The magnetic compression experiment at GF was a repetitive non-destructive test to study plasma physics applicable to Magnetic Target Fusion compression. A spheromak compact torus (CT) is formed with a co-axial gun into a containment region with an hour-glass shaped inner flux conserver, and an insulating outer wall. External coil currents keep the CT off the outer wall (levitation) and then rapidly compress it inwards. The optimal external coil configuration greatly improved both the levitated CT lifetime and the rate of shots with good compressional flux conservation. As confirmed by spectrometer data, the improved levitation field profile reduced plasma impurity levels by suppressing the interaction between plasma and the insulating outer wall during the formation process. We developed an energy and toroidal flux conserving finite element axisymmetric MHD code to study CT formation and compression. The Braginskii MHD equations with anisotropic heat conduction were implemented. To simulate plasma / insulating wall interaction, we couple the vacuum field solution in the insulating region to the full MHD solution in the remainder of the domain. We see good agreement between simulation and experiment results. Partly funded by NSERC and MITACS Accelerate.

On the granular fingering instability: controlled triggering in laboratory experiments and numerical simulations

Science.gov (United States)

Vriend, Nathalie; Tsang, Jonny; Arran, Matthew; Jin, Binbin; Johnsen, Alexander

2017-11-01

When a mixture of small, smooth particles and larger, coarse particles is released on a rough inclined plane, the initial uniform front may break up in distinct fingers which elongate over time. This fingering instability is sensitive to the unique arrangement of individual particles and is driven by granular segregation (Pouliquen et al., 1997). Variability in initial conditions create significant limitations for consistent experimental and numerical validation of newly developed theoretical models (Baker et al., 2016) for finger formation. We present an experimental study using a novel tool that sets the initial fingering width of the instability. By changing this trigger width between experiments, we explore the response of the avalanche breakup to perturbations of different widths. Discrete particle simulations (using MercuryDPM, Thornton et al., 2012) are conducted under a similar setting, reproducing the variable finger width, allowing validation between experiments and numerical simulations. A good agreement between simulations and experiments is obtained, and ongoing theoretical work is briefly introduced. NMV acknowledges the Royal Society Dorothy Hodgkin Research Fellowship.

Considerações sobre avaliação de estabelecimentos de saúde sob gestão de OSS: o caso do Hospital Geral do Grajaú Considerations on evaluation of health facilities management under the model of Social Organizations of Health: the case of Grajaú General Hospital

Directory of Open Access Journals (Sweden)

Amanda Alves Tibério

2010-09-01

Full Text Available OBJETIVOS: A partir da década de 1990, em face de um cenário de limitações de recursos do Estado para financiamento de serviços essenciais à população, novas formas de administração pública começam a ser implementadas. Uma das principais formas adotadas refere-se à delegação da administração de hospitais públicos do estado de São Paulo às Organizações Sociais de Saúde (OSS. O artigo propõe um formato de avaliação da gestão das políticas públicas de saúde via OSS no município de São Paulo, a partir do caso do Hospital Geral do Grajaú. PROCEDIMENTOS METODOLÓGICOS: A avaliação concentrou-se em variáveis sócio-econômicas e demográficas da população local e sua articulação com variáveis estruturais da rede básica de saúde disponíveis; além de dados sobre infra-estrutura da instituição selecionada e relatórios da organização social de saúde no período entre 2004 e 2007. RESULTADOS: A região apresenta déficit de unidades básicas de saúde, que gera sobrecarga de atendimentos de baixa complexidade no hospital. Os resultados da avaliação comparativa entre oferta e demanda por serviços públicos de saúde, a partir do perfil populacional da região e características de atendimentos realizados pela organização social, indicam que a unidade buscou adaptar-se às necessidades prioritárias da região. No entanto, verificou-se, também, que a implantação de um único hospital em uma região de alta vulnerabilidade social é insuficiente para suprir as necessidades da população, sendo necessária uma rede de unidades básicas de saúde para auxiliar na realização de atendimentos de baixa complexidade, permitindo focalização do atendimento hospitalar sobre atendimentos de média e alta complexidade.OBJECTIVES: Since the 1990s, in light of a scenario of limited government resources to finance essential public services to address population needs, new public administration models have been

Experiment and Simulation Study of Single Cylinder Diesel Engine Performance, Using Soybean Oil Biodiesel

Directory of Open Access Journals (Sweden)

Muhammad Rizqi Ariefianto

2017-01-01

Full Text Available Abstract— The most common fuel uses in the world is made from fossil. Fossil fuel is categorized as a non-renewable energy source. For that reason, there should be an alternative fuel to replace fossil fuel by using biodiesel and one of the stock comes from soybean bean. Before using the biodiesel made from soybean bean oil, there should be a research to find out the properties and the effect of biodiesel from soybean bean oil regarding the performance of the engine. The research can be conducted in experiment and simulation. The properties result of soybean oil biodiesel should be tested to confirm whether this biodiesel have meet the standard requirement of biodieselor not. This biodiesel sproperties are Flash Point value is 182 o C , Pour Point value is -7 o C, Density at 15 o C is 890 Kg/m3, Kinematic Viscosity at 40 o C is 5.58 (cSt, and Lower Heating Value is 42.27686 MJ/kg. The result from this research is the highest power from simulation is 9% higher than the experiment. The highest torque from the experiment is 37% lower than the simulation’s torque. Lowest SFOC from experiment is  28% lower than the simulation’s SFOC. Highest BMEP from simulation is 20% higher than the highest BMEP from experiment. The  highest thermal efficiency from experiment is 6% higher than the highest thermal efficiency from simulation. The engine performance result using soybean oil biodiesel is not better than the Pertamina Dex. For that reason, the use of this biodiesel is not suggested to substitute Pertamina Dex.

Simultaneous epicardial and noncontact endocardial mapping of the canine right atrium: simulation and experiment.

Science.gov (United States)

Sabouri, Sepideh; Matene, Elhacene; Vinet, Alain; Richer, Louis-Philippe; Cardinal, René; Armour, J Andrew; Pagé, Pierre; Kus, Teresa; Jacquemet, Vincent

2014-01-01

Epicardial high-density electrical mapping is a well-established experimental instrument to monitor in vivo the activity of the atria in response to modulations of the autonomic nervous system in sinus rhythm. In regions that are not accessible by epicardial mapping, noncontact endocardial mapping performed through a balloon catheter may provide a more comprehensive description of atrial activity. We developed a computer model of the canine right atrium to compare epicardial and noncontact endocardial mapping. The model was derived from an experiment in which electroanatomical reconstruction, epicardial mapping (103 electrodes), noncontact endocardial mapping (2048 virtual electrodes computed from a 64-channel balloon catheter), and direct-contact endocardial catheter recordings were simultaneously performed in a dog. The recording system was simulated in the computer model. For simulations and experiments (after atrio-ventricular node suppression), activation maps were computed during sinus rhythm. Repolarization was assessed by measuring the area under the atrial T wave (ATa), a marker of repolarization gradients. Results showed an epicardial-endocardial correlation coefficients of 0.80 and 0.63 (two dog experiments) and 0.96 (simulation) between activation times, and a correlation coefficients of 0.57 and 0.46 (two dog experiments) and 0.92 (simulation) between ATa values. Despite distance (balloon-atrial wall) and dimension reduction (64 electrodes), some information about atrial repolarization remained present in noncontact signals.

Simultaneous epicardial and noncontact endocardial mapping of the canine right atrium: simulation and experiment.

Directory of Open Access Journals (Sweden)

Sepideh Sabouri

Full Text Available Epicardial high-density electrical mapping is a well-established experimental instrument to monitor in vivo the activity of the atria in response to modulations of the autonomic nervous system in sinus rhythm. In regions that are not accessible by epicardial mapping, noncontact endocardial mapping performed through a balloon catheter may provide a more comprehensive description of atrial activity. We developed a computer model of the canine right atrium to compare epicardial and noncontact endocardial mapping. The model was derived from an experiment in which electroanatomical reconstruction, epicardial mapping (103 electrodes, noncontact endocardial mapping (2048 virtual electrodes computed from a 64-channel balloon catheter, and direct-contact endocardial catheter recordings were simultaneously performed in a dog. The recording system was simulated in the computer model. For simulations and experiments (after atrio-ventricular node suppression, activation maps were computed during sinus rhythm. Repolarization was assessed by measuring the area under the atrial T wave (ATa, a marker of repolarization gradients. Results showed an epicardial-endocardial correlation coefficients of 0.80 and 0.63 (two dog experiments and 0.96 (simulation between activation times, and a correlation coefficients of 0.57 and 0.46 (two dog experiments and 0.92 (simulation between ATa values. Despite distance (balloon-atrial wall and dimension reduction (64 electrodes, some information about atrial repolarization remained present in noncontact signals.

Simultaneous Epicardial and Noncontact Endocardial Mapping of the Canine Right Atrium: Simulation and Experiment

Science.gov (United States)

Sabouri, Sepideh; Matene, Elhacene; Vinet, Alain; Richer, Louis-Philippe; Cardinal, René; Armour, J. Andrew; Pagé, Pierre; Kus, Teresa; Jacquemet, Vincent

2014-01-01

Epicardial high-density electrical mapping is a well-established experimental instrument to monitor in vivo the activity of the atria in response to modulations of the autonomic nervous system in sinus rhythm. In regions that are not accessible by epicardial mapping, noncontact endocardial mapping performed through a balloon catheter may provide a more comprehensive description of atrial activity. We developed a computer model of the canine right atrium to compare epicardial and noncontact endocardial mapping. The model was derived from an experiment in which electroanatomical reconstruction, epicardial mapping (103 electrodes), noncontact endocardial mapping (2048 virtual electrodes computed from a 64-channel balloon catheter), and direct-contact endocardial catheter recordings were simultaneously performed in a dog. The recording system was simulated in the computer model. For simulations and experiments (after atrio-ventricular node suppression), activation maps were computed during sinus rhythm. Repolarization was assessed by measuring the area under the atrial T wave (ATa), a marker of repolarization gradients. Results showed an epicardial-endocardial correlation coefficients of 0.80 and 0.63 (two dog experiments) and 0.96 (simulation) between activation times, and a correlation coefficients of 0.57 and 0.46 (two dog experiments) and 0.92 (simulation) between ATa values. Despite distance (balloon-atrial wall) and dimension reduction (64 electrodes), some information about atrial repolarization remained present in noncontact signals. PMID:24598778

Radiotracer experiments and CFD simulation for industrial hydrocyclone performance

International Nuclear Information System (INIS)

Stegowski, Z.; Nowak, E.

2007-01-01

Hydrocyclone is a device for solid concentration or selection of solid particles from a liquid-solid mixture. It is widely used in the mineral industry for selection of solid particles from a few to a few hundred micrometers. This paper presents a radiotracer experiment and computational simulation of selection of solid particles in a hydrocyclone of Φ-500 μm, which is used in the industrial copper ore concentration process. The simulation, based on computational fluid dynamics (CFD) techniques, allowed obtaining the velocity and concentration distribution for a real mixture flowing in the hydrocyclone. The mixture was composed of water and nine solid phases of different grain sizes. Finally, the selection curve of solid grains was obtained and compared with the experimental radiotracer results. (author)

The Design and the Formative Evaluation of a Web-Based Course for Simulation Analysis Experiences

Science.gov (United States)

Tao, Yu-Hui; Guo, Shin-Ming; Lu, Ya-Hui

2006-01-01

Simulation output analysis has received little attention comparing to modeling and programming in real-world simulation applications. This is further evidenced by our observation that students and beginners acquire neither adequate details of knowledge nor relevant experience of simulation output analysis in traditional classroom learning. With…

Numerical Simulation Applications in the Design of EGS Collab Experiment 1

Energy Technology Data Exchange (ETDEWEB)

Johnston, Henry [National Renewable Energy Laboratory (NREL), Golden, CO (United States); White, Mark D. [Pacific Northwest National Laboratory; Fu, Pengcheng [Lawrence Livermore National Laboratory; Ghassemi, Ahmad [University of Oklahoma; Huang, Hai [Idaho National Laboratory; Rutqvist, Jonny [Lawrence Berkeley National Laboratory

2018-02-14

The United States Department of Energy, Geothermal Technologies Office (GTO) is funding a collaborative investigation of enhanced geothermal systems (EGS) processes at the meso-scale. This study, referred to as the EGS Collab project, is a unique opportunity for scientists and engineers to investigate the creation of fracture networks and circulation of fluids across those networks under in-situ stress conditions. The EGS Collab project is envisioned to comprise three experiments and the site for the first experiment is on the 4850 Level (4,850 feet below ground surface) in phyllite of the Precambrian Poorman formation, at the Sanford Underground Research Facility, located at the former Homestake Gold Mine, in Lead, South Dakota. Principal objectives of the project are to develop a number of intermediate-scale field sites and to conduct well-controlled in situ experiments focused on rock fracture behavior and permeability enhancement. Data generated during these experiments will be compared against predictions of a suite of computer codes specifically designed to solve problems involving coupled thermal, hydrological, geomechanical, and geochemical processes. Comparisons between experimental and numerical simulation results will provide code developers with direction for improvements and verification of process models, build confidence in the suite of available numerical tools, and ultimately identify critical future development needs for the geothermal modeling community. Moreover, conducting thorough comparisons of models, modelling approaches, measurement approaches and measured data, via the EGS Collab project, will serve to identify techniques that are most likely to succeed at the Frontier Observatory for Research in Geothermal Energy (FORGE), the GTO's flagship EGS research effort. As noted, outcomes from the EGS Collab project experiments will serve as benchmarks for computer code verification, but numerical simulation additionally plays an essential

Background simulation for the COBRA-experiment

Energy Technology Data Exchange (ETDEWEB)

Quante, Thomas [TU Dortmund, Institut fuer Physik (Germany); Collaboration: COBRA-Collaboration

2015-07-01

COBRA is a next-generation experiment searching for neutrinoless double beta (0νββ) decay using CdZnTe semiconductor detectors. The main focus is on {sup 116}Cd, with a Q-value of 2813.5 keV well above the highest dominant naturally occurring gamma lines. By measuring the half-life of the 0νββ decay, it is possible to clarify the nature of the neutrino as either Dirac or Majorana particle and furthermore to determine the effective Majorana mass. COBRA is currently in the demonstrator phase to study possible background contributions and gain information about the longterm stability of the used detectors. For this purpose a demonstrator array made up of 64 Cadmium-Zinc-Telluride (CdZnTe) semiconductor detectors in coplanar grid configuration was designed and realised at the Gran Sasso Underground laboratory (LNGS) in Italy. Simulations of the whole demonstrator setup are ongoing to reproduce the measured spectra for each detector. This is done in two steps. The first uses the Geant4 based framework VENOM for tracking and energy deposition inside each detector. Detector effects like the energy resolution and electron trapping have to be applied in the second step. The used detector geometry has to be verified against calibration measurements. This talk gives an overview of the current simulation status.

Learning in innovation networks: Some simulation experiments

Science.gov (United States)

Gilbert, Nigel; Ahrweiler, Petra; Pyka, Andreas

2007-05-01

According to the organizational learning literature, the greatest competitive advantage a firm has is its ability to learn. In this paper, a framework for modeling learning competence in firms is presented to improve the understanding of managing innovation. Firms with different knowledge stocks attempt to improve their economic performance by engaging in radical or incremental innovation activities and through partnerships and networking with other firms. In trying to vary and/or to stabilize their knowledge stocks by organizational learning, they attempt to adapt to environmental requirements while the market strongly selects on the results. The simulation experiments show the impact of different learning activities, underlining the importance of innovation and learning.

Model experiment and numerical simulation of drop impact response of multilayer-combinational container

International Nuclear Information System (INIS)

Xie Ruoze; Zhong Weizhou; Wan Qiang; Huang Xicheng; Zhang Fangju

2015-01-01

The drop impact process of multilayer-combinational container was simulated experimentally using a gas gun, and the normal impact and oblique impact of scaled models were tested. The experiments of scaled models were simulated numerically, and the stress distribution and plastic deformation in the tested structures during collision process were obtained. The results were compared with the experiment data. It was shown that the impact work mainly converted into plastic work due to the plastic deformation of the cushion wood and the plastic hinge in the buckled steel shell. The plastic deformation mainly happened at the collided end of the scaled models, and there was no plastic deformation found far from the collided end. The compressive stress-strain curve of the wood in texture direction can be used to simulate numerically the drop impact process of multilayer-combinational container. (authors)

Hybrid Reynolds-Averaged/Large-Eddy Simulations of a Coaxial Supersonic Free-Jet Experiment

Science.gov (United States)

Baurle, Robert A.; Edwards, Jack R.

2010-01-01

Reynolds-averaged and hybrid Reynolds-averaged/large-eddy simulations have been applied to a supersonic coaxial jet flow experiment. The experiment was designed to study compressible mixing flow phenomenon under conditions that are representative of those encountered in scramjet combustors. The experiment utilized either helium or argon as the inner jet nozzle fluid, and the outer jet nozzle fluid consisted of laboratory air. The inner and outer nozzles were designed and operated to produce nearly pressure-matched Mach 1.8 flow conditions at the jet exit. The purpose of the computational effort was to assess the state-of-the-art for each modeling approach, and to use the hybrid Reynolds-averaged/large-eddy simulations to gather insight into the deficiencies of the Reynolds-averaged closure models. The Reynolds-averaged simulations displayed a strong sensitivity to choice of turbulent Schmidt number. The initial value chosen for this parameter resulted in an over-prediction of the mixing layer spreading rate for the helium case, but the opposite trend was observed when argon was used as the injectant. A larger turbulent Schmidt number greatly improved the comparison of the results with measurements for the helium simulations, but variations in the Schmidt number did not improve the argon comparisons. The hybrid Reynolds-averaged/large-eddy simulations also over-predicted the mixing layer spreading rate for the helium case, while under-predicting the rate of mixing when argon was used as the injectant. The primary reason conjectured for the discrepancy between the hybrid simulation results and the measurements centered around issues related to the transition from a Reynolds-averaged state to one with resolved turbulent content. Improvements to the inflow conditions were suggested as a remedy to this dilemma. Second-order turbulence statistics were also compared to their modeled Reynolds-averaged counterparts to evaluate the effectiveness of common turbulence closure

Theory and simulation of an inverse free-electron laser experiment

Science.gov (United States)

Gou, S. K.; Bhattacharjee, A.; Fang, J.-M.; Marshall, T. C.

1997-03-01

An experimental demonstration of the acceleration of electrons using a high-power CO2 laser interacting with a relativistic electron beam moving along a wiggler has been carried out at the Accelerator Test Facility of the Brookhaven National Laboratory [Phys. Rev. Lett. 77, 2690 (1996)]. The data generated by this inverse free-electron-laser (IFEL) experiment are studied by means of theory and simulation. Included in the simulations are such effects as: a low-loss metallic waveguide with a dielectric coating on the walls; multi-mode coupling due to self-consistent interaction between the electrons and the optical wave; space charge; energy spread of the electrons; and arbitrary wiggler-field profile. Two types of wiggler profile are considered: a linear taper of the period, and a step-taper of the period. (The period of the wiggler is ˜3 cm, its magnetic field is ˜1 T, and the wiggler length is 0.47 m.) The energy increment of the electrons (˜1-2%) is analyzed in detail as a function of laser power, wiggler parameters, and the initial beam energy (˜40 MeV). At a laser power level ˜0.5 Gw, the simulation results on energy gain are in reasonable agreement with the experimental results. Preliminary results on the electron energy distribution at the end of the IFEL are presented. Whereas the experiment produces a near-monotone distribution of electron energies with the peak shifted to higher energy, the simulation shows a more structured and non-monotonic distribution at the end of the wiggler. Effects that may help reconcile these differences are considered.

Evaluation of the 7-km GEOS-5 Nature Run

Science.gov (United States)

Gelaro, Ronald; Putman, William M.; Pawson, Steven; Draper, Clara; Molod, Andrea; Norris, Peter M.; Ott, Lesley; Prive, Nikki; Reale, Oreste; Achuthavarier, Deepthi;

A simulation of the San Andreas fault experiment

Science.gov (United States)

Agreen, R. W.; Smith, D. E.

1974-01-01

The San Andreas fault experiment (Safe), which employs two laser tracking systems for measuring the relative motion of two points on opposite sides of the fault, has been simulated for an 8-yr observation period. The two tracking stations are located near San Diego on the western side of the fault and near Quincy on the eastern side; they are roughly 900 km apart. Both will simultaneously track laser reflector equipped satellites as they pass near the stations. Tracking of the Beacon Explorer C spacecraft has been simulated for these two stations during August and September for 8 consecutive years. An error analysis of the recovery of the relative location of Quincy from the data has been made, allowing for model errors in the mass of the earth, the gravity field, solar radiation pressure, atmospheric drag, errors in the position of the San Diego site, and biases and noise in the laser systems. The results of this simulation indicate that the distance of Quincy from San Diego will be determined each year with a precision of about 10 cm. Projected improvements in these model parameters and in the laser systems over the next few years will bring the precision to about 1-2 cm by 1980.

Numerical simulations of a nonequilibrium argon plasma in a shock-tube experiment

Science.gov (United States)

Cambier, Jean-Luc

1991-01-01

A code developed for the numerical modeling of nonequilibrium radiative plasmas is applied to the simulation of the propagation of strong ionizing shock waves in argon gas. The simulations attempt to reproduce a series of shock-tube experiments which will be used to validate the numerical models and procedures. The ability to perform unsteady simulations makes it possible to observe some fluctuations in the shock propagation, coupled to the kinetic processes. A coupling mechanism by pressure waves, reminiscent of oscillation mechanisms observed in detonation waves, is described. The effect of upper atomic levels is also briefly discussed.

Satellite hole formation during dewetting: experiment and simulation

International Nuclear Information System (INIS)

Neto, Chiara; Jacobs, Karin; Seemann, Ralf; Blossey, Ralf; Becker, Juergen; Gruen, Guenther

2003-01-01

The dewetting of thin polymer films on solid substrates has been studied extensively in recent years. These films can decay either by nucleation events or by spinodal dewetting, essentially only depending on the interface potential describing the short- and long-range intermolecular interactions between the interfaces and the initial film thickness. Here, we describe experiments and simulations concerned with the decay of polystyrene thin films. The rupture of the film occurs by the formation of a correlated pattern of holes ('satellite holes') along the liquid rims accumulating at the channel borders. The development of this complex film rupture process, which is neither simply spinodal nor nucleation dewetting, can be mimicked precisely by making use of a novel simulation code based on a rigorous mathematical treatment of the thin film equation and on the knowledge of the effective interface potential of the system. The conditions that determine the appearance and the position of the satellite holes around pre-existing holes are discussed

Satellite hole formation during dewetting: experiment and simulation

CERN Document Server

Neto, C; Seemann, R; Blossey, R; Becker, J; Grün, G

2003-01-01

The dewetting of thin polymer films on solid substrates has been studied extensively in recent years. These films can decay either by nucleation events or by spinodal dewetting, essentially only depending on the interface potential describing the short- and long-range intermolecular interactions between the interfaces and the initial film thickness. Here, we describe experiments and simulations concerned with the decay of polystyrene thin films. The rupture of the film occurs by the formation of a correlated pattern of holes ('satellite holes') along the liquid rims accumulating at the channel borders. The development of this complex film rupture process, which is neither simply spinodal nor nucleation dewetting, can be mimicked precisely by making use of a novel simulation code based on a rigorous mathematical treatment of the thin film equation and on the knowledge of the effective interface potential of the system. The conditions that determine the appearance and the position of the satellite holes around ...

Simulations of MATROSHKA experiments at ISS using PHITS

CERN Document Server

Sihver, L; Puchalska, M; Reitz, G

2010-01-01

Concerns about the biological effects of space radiation are increasing rapidly due to the perspective of long-duration manned missions, both in relation to the International Space Station (ISS) and to manned interplanetary missions to Moon and Mars in the future. As a preparation for these long duration space missions it is important to ensure an excellent capability to evaluate the impact of space radiation on human health in order to secure the safety of the astronauts/cosmonauts and minimize their risks. It is therefore necessary to measure the radiation load on the personnel both inside and outside the space vehicles and certify that organ and tissue equivalent doses can be simulated as accurate as possible. In this paper we will present simulations using the three-dimensional Monte Carlo Particle and Heavy Ion Transport code System (PHITS) of long term dose measurements performed with the ESA supported experiment MATROSHKA (MTR), which is an anthropomorphic phantom containing over 6000 radiation detecto...

Comparison of simulation with experiment in an RFQ

International Nuclear Information System (INIS)

Boicourt, G.P.; Sander, O.R.; Wangler, T.P.

1985-01-01

The accelerator test stand (ATS) RFQ has provided an opportunity to compare the predictions of the RFQ beam-dynamics code PARMTEQ with actual operation of an RFQ. For this comparison, the code was adapted to simulate the measured operation parameters, which are somewhat different from those of the ideal design. A Monte Carlo code was written to provide input to PARMTEQ, based on measured input beam distributions. With these refinements, the code has given results that are in good agreement with measurements and has provided information leading to an explanation of an unexpected set of measurements. This paper describes the method used to generate a pseudo particle beam based on the measured transverse properties of the RFQ input beam and describes some of the comparisons between simulation and experiment. An explanation is provided for the energy-spectrum structure observed in the RFQ output beam during low-voltage operation. 3 refs., 7 figs

PSB-VVER counterpart experiment simulating a small cold leg break LOCA

International Nuclear Information System (INIS)

Blinkov, V.N.; Melikhov, O.I.; Kapustin, A.V.; Lipatov, I.A.; Dremin, G.I.; Nikonov, S.M.; Rovnov, A.A.; Elkin, I.V.; Pylev, S.S.

2005-01-01

Full text of publication follows: An experiment simulating a small break LOCA has been performed in PSB-VVER facility, under PSB-VVER OECD Project. The test is intended to be a counterpart one to an experiment performed in the LOBI integral test facility. The objectives of the PSB-VVER small cold leg break test are: to study VVER-1000 thermal hydraulic response following a small break in the cold leg, to provide data for code assessment regarding phenomena indicated in the VVER-1000 code validation matrix and to study the scaling effect. The scenario for the PSB-VVER experiment has been designed taking the LOBI BL-34 test as reference. The ratio of primary system volumes (without volume of the pressurizer and the surge line) has been chosen to scale the reference experiment conditions and to generate the conditions of PSB-VVER cold leg break experiment. The resulting conditions are compared with the LOBI cold leg break test conditions by means of different counterpart test criteria. Comparing the two experiments in terms of the criteria shows that basic requirements to the counterpart test are fulfilled. A pretest analysis with RELAP5/MOD3.2 code has shown that the PSBVVER small break experiment is expected to show the same relevant phenomena and main events as the LOBI BL-34 test. The predicted PSB-VVER primary pressure is very close to that measured in the LOBI facility. The measured pressure in the PSB-VVER primary system has turned out to be very close to that registered in LOBI BL-34 test. This verifies the approach used for developing the conditions of the PSB-VVER counterpart test. The experiment results and the RELAP5/MOD3.2 pretest calculation are in good agreement. A posttest calculation of the experiment with RELAP5/MOD3.2 code has been performed in order to assess the codes capability to simulate the phenomena relevant to the test. The code has shown a reasonable prediction of the phenomena measured in the experiment. (authors)

PSB-VVER counterpart experiment simulating a small cold leg break LOCA

Energy Technology Data Exchange (ETDEWEB)

Blinkov, V.N.; Melikhov, O.I.; Kapustin, A.V.; Lipatov, I.A.; Dremin, G.I.; Nikonov, S.M.; Rovnov, A.A. [Elektrogorsk Research and Engineering Center, EREC, Bezymiannaja Street, 6, Elektrogorsk, Moscow Region, 142530 (Russian Federation); Elkin, I.V.; Pylev, S.S. [NSI RRC ' Kurchatov Institute' , Kurchatov Sq., 1, Moscow, 123182 (Russian Federation)

2005-07-01

Full text of publication follows: An experiment simulating a small break LOCA has been performed in PSB-VVER facility, under PSB-VVER OECD Project. The test is intended to be a counterpart one to an experiment performed in the LOBI integral test facility. The objectives of the PSB-VVER small cold leg break test are: to study VVER-1000 thermal hydraulic response following a small break in the cold leg, to provide data for code assessment regarding phenomena indicated in the VVER-1000 code validation matrix and to study the scaling effect. The scenario for the PSB-VVER experiment has been designed taking the LOBI BL-34 test as reference. The ratio of primary system volumes (without volume of the pressurizer and the surge line) has been chosen to scale the reference experiment conditions and to generate the conditions of PSB-VVER cold leg break experiment. The resulting conditions are compared with the LOBI cold leg break test conditions by means of different counterpart test criteria. Comparing the two experiments in terms of the criteria shows that basic requirements to the counterpart test are fulfilled. A pretest analysis with RELAP5/MOD3.2 code has shown that the PSBVVER small break experiment is expected to show the same relevant phenomena and main events as the LOBI BL-34 test. The predicted PSB-VVER primary pressure is very close to that measured in the LOBI facility. The measured pressure in the PSB-VVER primary system has turned out to be very close to that registered in LOBI BL-34 test. This verifies the approach used for developing the conditions of the PSB-VVER counterpart test. The experiment results and the RELAP5/MOD3.2 pretest calculation are in good agreement. A posttest calculation of the experiment with RELAP5/MOD3.2 code has been performed in order to assess the codes capability to simulate the phenomena relevant to the test. The code has shown a reasonable prediction of the phenomena measured in the experiment. (authors)

Monte Carlo simulation experiments on box-type radon dosimeter

International Nuclear Information System (INIS)

Jamil, Khalid; Kamran, Muhammad; Illahi, Ahsan; Manzoor, Shahid

2014-01-01

Epidemiological studies show that inhalation of radon gas ( 222 Rn) may be carcinogenic especially to mine workers, people living in closed indoor energy conserved environments and underground dwellers. It is, therefore, of paramount importance to measure the 222 Rn concentrations (Bq/m 3 ) in indoors environments. For this purpose, box-type passive radon dosimeters employing ion track detector like CR-39 are widely used. Fraction of the number of radon alphas emitted in the volume of the box type dosimeter resulting in latent track formation on CR-39 is the latent track registration efficiency. Latent track registration efficiency is ultimately required to evaluate the radon concentration which consequently determines the effective dose and the radiological hazards. In this research, Monte Carlo simulation experiments were carried out to study the alpha latent track registration efficiency for box type radon dosimeter as a function of dosimeter’s dimensions and range of alpha particles in air. Two different self developed Monte Carlo simulation techniques were employed namely: (a) Surface ratio (SURA) method and (b) Ray hitting (RAHI) method. Monte Carlo simulation experiments revealed that there are two types of efficiencies i.e. intrinsic efficiency (η int ) and alpha hit efficiency (η hit ). The η int depends upon only on the dimensions of the dosimeter and η hit depends both upon dimensions of the dosimeter and range of the alpha particles. The total latent track registration efficiency is the product of both intrinsic and hit efficiencies. It has been concluded that if diagonal length of box type dosimeter is kept smaller than the range of alpha particle then hit efficiency is achieved as 100%. Nevertheless the intrinsic efficiency keeps playing its role. The Monte Carlo simulation experimental results have been found helpful to understand the intricate track registration mechanisms in the box type dosimeter. This paper explains that how radon

Monte Carlo simulation experiments on box-type radon dosimeter

Energy Technology Data Exchange (ETDEWEB)

Jamil, Khalid, E-mail: kjamil@comsats.edu.pk; Kamran, Muhammad; Illahi, Ahsan; Manzoor, Shahid

2014-11-11

Epidemiological studies show that inhalation of radon gas ({sup 222}Rn) may be carcinogenic especially to mine workers, people living in closed indoor energy conserved environments and underground dwellers. It is, therefore, of paramount importance to measure the {sup 222}Rn concentrations (Bq/m{sup 3}) in indoors environments. For this purpose, box-type passive radon dosimeters employing ion track detector like CR-39 are widely used. Fraction of the number of radon alphas emitted in the volume of the box type dosimeter resulting in latent track formation on CR-39 is the latent track registration efficiency. Latent track registration efficiency is ultimately required to evaluate the radon concentration which consequently determines the effective dose and the radiological hazards. In this research, Monte Carlo simulation experiments were carried out to study the alpha latent track registration efficiency for box type radon dosimeter as a function of dosimeter’s dimensions and range of alpha particles in air. Two different self developed Monte Carlo simulation techniques were employed namely: (a) Surface ratio (SURA) method and (b) Ray hitting (RAHI) method. Monte Carlo simulation experiments revealed that there are two types of efficiencies i.e. intrinsic efficiency (η{sub int}) and alpha hit efficiency (η{sub hit}). The η{sub int} depends upon only on the dimensions of the dosimeter and η{sub hit} depends both upon dimensions of the dosimeter and range of the alpha particles. The total latent track registration efficiency is the product of both intrinsic and hit efficiencies. It has been concluded that if diagonal length of box type dosimeter is kept smaller than the range of alpha particle then hit efficiency is achieved as 100%. Nevertheless the intrinsic efficiency keeps playing its role. The Monte Carlo simulation experimental results have been found helpful to understand the intricate track registration mechanisms in the box type dosimeter. This paper

Histologic and Radiographic Analysis of Nonhealing Extraction Sockets Treated with Bio-Oss Collagen After a 4-Month Healing Period: A Prospective Descriptive Study in Humans.

Science.gov (United States)

Tirone, Federico; Salzano, Stefano; Pagano, Marco

2018-03-07

Healing of extraction sockets may sometimes result in formation of fibrous tissue instead of bone, even after 4 months, an occurrence that may hinder implant placement. The aim of this preliminary observational study was to histologically evaluate quality and amount of bone regeneration after treating nonhealing sockets with a bovine-derived xenograft enriched with porcine collagen (Bio-Oss Collagen, Geistlich) without barrier membranes. Biopsy specimens were collected during implant placement, 4 months after grafting. A total of 10 cases were treated and evaluated. In all cases, correct implant placement was possible and no implant failure occurred up to 6 months after loading. The histologic analysis demonstrated new bone formation in all specimens. The percentage of newly formed bone was 29.1% (SD 20.71%; range 5% to 48%). Xenograft particles in direct contact with newly formed bone were visible, and mature lamellar bone was observed in 8 cases.

After-hours/on-call experience during primary care nurse practitioner education utilizing standard scenarios and simulated patients.

Science.gov (United States)

Kelly, Michelle M; Blunt, Elizabeth; Nestor, Kelly

2017-12-01

Few nurse practitioner (NP) programs include an after-hours/on-call component in their clinical preparation of NP students. This role is expected in many primary and specialty care practices, and is one that students feel unprepared to competently navigate. Utilizing simulated callers as patients or parents, NP students participated in a simulated after-hours/on-call experience that included receiving the call, managing the patient, and submitting documentation of the encounter. Students completed pre- and postparticipation evaluations, and were evaluated by the simulated patient callers and faculty using standardized evaluation tools. NP students rated the experience as an educationally valuable experience despite feeling anxious and nervous about the experience. Several essential skills were identified including critical thinking, clear communication, self-confidence, and access to resources. After participation NP students were more receptive to an NP position with an on-call component. Inclusion of a simulated on-call experience is a feasible component of NP education and should be added to the NP curriculum. ©2017 American Association of Nurse Practitioners.

End-to-End Beam Simulations for the New Muon G-2 Experiment at Fermilab

Energy Technology Data Exchange (ETDEWEB)

Korostelev, Maxim [Cockcroft Inst. Accel. Sci. Tech.; Bailey, Ian [Lancaster U.; Herrod, Alexander [Liverpool U.; Morgan, James [Fermilab; Morse, William [RIKEN BNL; Stratakis, Diktys [RIKEN BNL; Tishchenko, Vladimir [RIKEN BNL; Wolski, Andrzej [Cockcroft Inst. Accel. Sci. Tech.

2016-06-01

The aim of the new muon g-2 experiment at Fermilab is to measure the anomalous magnetic moment of the muon with an unprecedented uncertainty of 140 ppb. A beam of positive muons required for the experiment is created by pion decay. Detailed studies of the beam dynamics and spin polarization of the muons are important to predict systematic uncertainties in the experiment. In this paper, we present the results of beam simulations and spin tracking from the pion production target to the muon storage ring. The end-to-end beam simulations are developed in Bmad and include the processes of particle decay, collimation (with accurate representation of all apertures) and spin tracking.

Simulation of power maneuvering experiment of MASLWR test facility by MARS-KS code

Energy Technology Data Exchange (ETDEWEB)

Park, Ju Yeop [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2013-10-15

In this ICSP, experimental data obtained from MASLWR (Mulit-Application Small Light Water Reactor) test facility located at Oregon state university in the US have been simulated by various thermal-hydraulic codes of each participant of the ICSP and compared among others. MASLWR test facility is a mock-up of a passive integral type reactor equipped with helical coil steam generator. Since SMART reactor which is currently being developed in Korea also adopts a helical coil steam generator, Korea Institute of Nuclear Safety (KINS) has joined this ICSP to assess the applicability of a domestic regulatory audit thermal-hydraulic code (i. e. MARS-KS code) for the SMART reactor including wall-to-fluid heat transfer model modification based on independent international experiment data. In the ICSP, two types of transient experiments have been focused and they are 1) loss of feedwater transient with subsequent ADS operation and long term cooling (SP-2) and normal operating conditions at different power levels. In the present study, KINS simulation result by the MARS-KS code (KS-002 version) for the SP-3 experiment is presented in detail and conclusion on MARS-KS code performance drawn through this simulation is described. Performance of the MARS-KS code is evaluated through the simulation of the power maneuvering experiment of the MASLWR test facility. Steady run shows the helical coil specific heat transfer model of the code is reasonable. However, identified discrepancy of the primary mass flowrate at transient run shows code performance for pressure drop needs to be improved considering sensitivity of the flowrate to the pressure drop at natural circulation.

A pedagogical approach to the Boltzmann factor through experiments and simulations

International Nuclear Information System (INIS)

Battaglia, O R; Bonura, A; Sperandeo-Mineo, R M

2009-01-01

The Boltzmann factor is the basis of a huge amount of thermodynamic and statistical physics, both classical and quantum. It governs the behaviour of all systems in nature that are exchanging energy with their environment. To understand why the expression has this specific form involves a deep mathematical analysis, whose flow of logic is hard to see and is not at the level of high school or college students' preparation. We here present some experiments and simulations aimed at directly deriving its mathematical expression and illustrating the fundamental concepts on which it is grounded. Experiments use easily available apparatuses, and simulations are developed in the Net-Logo environment that, besides having a user-friendly interface, allows an easy interaction with the algorithm. The approach supplies pedagogical support for the introduction of the Boltzmann factor at the undergraduate level to students without a background in statistical mechanics.

A pedagogical approach to the Boltzmann factor through experiments and simulations

Energy Technology Data Exchange (ETDEWEB)

Battaglia, O R; Bonura, A; Sperandeo-Mineo, R M [University of Palermo Physics Education Research Group, Dipartimento di Fisica e Tecnologie Relative, Universita di Palermo (Italy)], E-mail: sperandeo@difter.unipa.it

2009-09-15

The Boltzmann factor is the basis of a huge amount of thermodynamic and statistical physics, both classical and quantum. It governs the behaviour of all systems in nature that are exchanging energy with their environment. To understand why the expression has this specific form involves a deep mathematical analysis, whose flow of logic is hard to see and is not at the level of high school or college students' preparation. We here present some experiments and simulations aimed at directly deriving its mathematical expression and illustrating the fundamental concepts on which it is grounded. Experiments use easily available apparatuses, and simulations are developed in the Net-Logo environment that, besides having a user-friendly interface, allows an easy interaction with the algorithm. The approach supplies pedagogical support for the introduction of the Boltzmann factor at the undergraduate level to students without a background in statistical mechanics.

Combining Experiments and Simulations Using the Maximum Entropy Principle

DEFF Research Database (Denmark)

Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten

2014-01-01

are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...... in the context of a simple example, after which we proceed with a real-world application in the field of molecular simulations, where the maximum entropy procedure has recently provided new insight. Given the limited accuracy of force fields, macromolecular simulations sometimes produce results....... Three very recent papers have explored this problem using the maximum entropy approach, providing both new theoretical and practical insights to the problem. We highlight each of these contributions in turn and conclude with a discussion on remaining challenges....

Evolution and experience with the ATLAS Simulation at Point1 Project

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00389536; The ATLAS collaboration; Brasolin, Franco; Kouba, Tomas; Schovancova, Jaroslava; Fazio, Daniel; Di Girolamo, Alessandro; Scannicchio, Diana; Twomey, Matthew Shaun; Wang, Fuquan; Zaytsev, Alexander; Lee, Christopher

2017-01-01

The Simulation at Point1 project is successfully running standard ATLAS simulation jobs on the TDAQ HLT resources. The pool of available resources changes dynamically, therefore we need to be very effective in exploiting the available computing cycles. We present our experience with using the Event Service that provides the event-level granularity of computations. We show the design decisions and overhead time related to the usage of the Event Service. The improved utilization of the resources is also presented with the recent development in monitoring, automatic alerting, deployment and GUI.

Evolution and experience with the ATLAS simulation at Point1 project

CERN Document Server

Ballestrero, Sergio; The ATLAS collaboration; Fazio, Daniel; Di Girolamo, Alessandro; Kouba, Tomas; Lee, Christopher; Scannicchio, Diana; Schovancova, Jaroslava; Twomey, Matthew Shaun; Wang, Fuquan; Zaytsev, Alexander

2016-01-01

The Simulation at Point1 project is successfully running traditional ATLAS simulation jobs on the TDAQ HLT resources. The pool of available resources changes dynamically, therefore we need to be very effective in exploiting the available computing cycles. We will present our experience with using the Event Service that provides the event-level granularity of computations. We will show the design decisions and overhead time related to the usage of the Event Service. The improved utilization of the resources will also be presented with the recent development in monitoring, automatic alerting, deployment and GUI.

Simulations of the magnetic properties experiment on Mars Exploration Rovers

International Nuclear Information System (INIS)

Gunnlaugsson, H. P.; Worm, E. S.; Bertelsen, P.; Goetz, W.; Kinch, K.; Madsen, M. B.; Merrison, J. P.; Nornberg, P.

2005-01-01

We present some of the main findings from simulation studies of the Magnetic Properties Experiment on the Mars Exploration Rovers. The results suggest that the dust has formed via mechanical breakdown of surface rocks through the geological history of the planet, and that liquid water need not have played any significant role in the dust formation processes.

SIMULATIONS AND GAMES IN MANAGEMENT EDUCATION: TOWARDS A MULTI-DIMENSIONAL EXPERIENCE

Directory of Open Access Journals (Sweden)

Jorge Paulo Sequeira

2013-06-01

Full Text Available Games and simulations have been used in the field of education for many years, particularly in the areas of business, training staff in financial and economic skills, combat training and war gaming. Internet-based games are also commonly used in the areas of education, business and policy to provide a safe but realistic experience of the real world. This paper explores some of the rationale that a team of lecturers at the Lisbon School of Accounting and Administration (ISCAL think should underpin simulation and game usage in an educational context, specifically in management education. Our aim with this work is about promoting learning and knowledge building through one of the latest evolved socio-cultural artifact: online simulations and games.

Simulation experiences of paramedic students: a cross-cultural examination

Directory of Open Access Journals (Sweden)

Williams B

2016-03-01

Full Text Available Brett Williams,1 Chloe Abel,1 Eihab Khasawneh,2 Linda Ross,1 Tracy Levett-Jones31Department of Community Emergency Health & Paramedic Practice, Monash University, Frankston, Victoria, Australia; 2Faculty of Applied Medical Sciences, Jordan University of Science and Technology, Irbid, Jordan; 3School of Nursing and Midwifery, The University of Newcastle, Callaghan, New South Wales, AustraliaBackground: Simulation-based education is an important part of paramedic education and ­training. While accessing clinical placements that are adequate in quality and quantity continues to be challenging, simulation is being recognized by paramedic academics as a potential alternative. Examining students’ satisfaction of simulation, particularly cross-culturally is therefore important in providing feedback to academic teaching staff and the international paramedic community.Objective: This study aimed to compare simulation satisfaction among paramedic students from universities in Australia and Jordan.Methods: A cross-sectional study using a paper-based English version of the Satisfaction with Simulation Experience Scale was administered to paramedic students from all year levels.Results: A total of 511 students participated in this study; 306 students (60% from Australia (Monash University and 205 students (40% from Jordan (Jordan University of Science and Technology. There were statistically significant differences with large effect size noted in all three original factors between Australian and Jordanian students: debrief and feedback (mean =38.66 vs mean =34.15; P<0.001; d=0.86, clinical reasoning (mean =21.32 vs mean =18.28; P<0.001; d=0.90, and clinical learning (mean =17.59 vs mean =15.47; P<0.001; d=1.12.Conclusion: This study has demonstrated that simulation education is generally well received by students in Australia and Jordan although Australian students reported having higher satisfaction levels then their Jordanian counterparts. These results

Simulation of pool scrubbing experiments using BUSCA

International Nuclear Information System (INIS)

Dehbi, A.; Guentay, S.

1994-01-01

BUSCA-PSI is a computer code which predicts the aerosol scrubbing taking place when gas bubbles containing fission products rise through stagnant pools of water after a postulated severe accident. A Lagrangian formulation is adopted to follow the path of a bubble as it rises toward the surface of the pool. The BUSCA model includes most aerosol removal mechanisms which are thought to be significant, namely: Jet Impaction at tile orifice, Convection/Diffusiophoresis during steam condensation, Thermophoresis, Sedimentation, Centrifugal Impaction during bubble rise, and Brownian Diffusion. The hydraulic modelling offers a variety of options for the initial globule volume, the stable bubble size, tile bubble rise velocity, and the bubble shape. The heat and mass transfer part of tile model uses correlations found in the relevant literature. BUSCA simulations were performed to determine the decontamination factor (DF) dependence on key aerosol and thermal hydraulic parameters. The decontamination factor increases with height, pool temperature subcooling, and steam content. The decontamination factor exhibits a parabolic dependence on the particle radius. At low particle sizes, the DF is high due to Brownian Diffusion which is the dominant removal mechanism. The DF hits a minimum and then increases with particle size as Centrifugal Impaction and Sedimentation become important. In separate calculations, BUSCA was used to the simulate the aerosol scrubbing experiments performed by EPRI. For cold pool tests, the predicted scrubbing efficiencies were in a good, conservative agreement with the data for both Tin and CsI, and the discrepancies were within the reported measurement errors. For hot pool tests, the code systematically underpredicted the scrubbing DF's; this is potentially due to condensation in the gas space above the pool, a situation not currently modelled by BUSCA. The code was also tested against data produced by the Tepco-Toshiba-Hitachi experiments. The

Mechanical Properties of Boehmite Evaluated by Atomic Force Microscopy Experiments and Molecular Dynamic Finite Element Simulations

International Nuclear Information System (INIS)

Fankhanel, J.; Daum, B.; Kempe, A.; Rolfes, R.; Silbernagl, D.; Khorasani, M.Gh.Z.; Sturm, H.; Sturm, H.

2016-01-01

Boehmite nanoparticles show great potential in improving mechanical properties of fiber reinforced polymers. In order to predict the properties of nanocomposites, knowledge about the material parameters of the constituent phases, including the boehmite particles, is crucial. In this study, the mechanical behavior of boehmite is investigated using Atomic Force Microscopy (AFM) experiments and Molecular Dynamic Finite Element Method (MDFEM) simulations. Young’s modulus of the perfect crystalline boehmite nanoparticles is derived from numerical AFM simulations. Results of AFM experiments on boehmite nanoparticles deviate significantly. Possible causes are identified by experiments on complementary types of boehmite, that is, geological and hydrothermally synthesized samples, and further simulations of imperfect crystals and combined boehmite/epoxy models. Under certain circumstances, the mechanical behavior of boehmite was found to be dominated by inelastic effects that are discussed in detail in the present work. The studies are substantiated with accompanying X-ray diffraction and Raman experiments.

Designing solar thermal experiments based on simulation

International Nuclear Information System (INIS)

Huleihil, Mahmoud; Mazor, Gedalya

2013-01-01

In this study three different models to describe the temperature distribution inside a cylindrical solid body subjected to high solar irradiation were examined, beginning with the simpler approach, which is the single dimension lump system (time), progressing through the two-dimensional distributed system approach (time and vertical direction), and ending with the three-dimensional distributed system approach with azimuthally symmetry (time, vertical direction, and radial direction). The three models were introduced and solved analytically and numerically. The importance of the models and their solution was addressed. The simulations based on them might be considered as a powerful tool in designing experiments, as they make it possible to estimate the different effects of the parameters involved in these models

Nonlinear soil-structure interaction calculations simulating the SIMQUAKE experiment using STEALTH 2D

Science.gov (United States)

Tang, H. T.; Hofmann, R.; Yee, G.; Vaughan, D. K.

1980-01-01

Transient, nonlinear soil-structure interaction simulations of an Electric Power Research Institute, SIMQUAKE experiment were performed using the large strain, time domain STEALTH 2D code and a cyclic, kinematically hardening cap soil model. Results from the STEALTH simulations were compared to identical simulations performed with the TRANAL code and indicate relatively good agreement between all the STEALTH and TRANAL calculations. The differences that are seen can probably be attributed to: (1) large (STEALTH) vs. small (TRANAL) strain formulation and/or (2) grid discretization differences.

The experiences of last-year student midwives with High-Fidelity Perinatal Simulation training: A qualitative descriptive study.

Science.gov (United States)

Vermeulen, Joeri; Beeckman, Katrien; Turcksin, Rivka; Van Winkel, Lies; Gucciardo, Léonardo; Laubach, Monika; Peersman, Wim; Swinnen, Eva

2017-06-01

Simulation training is a powerful and evidence-based teaching method in healthcare. It allows students to develop essential competences that are often difficult to achieve during internships. High-Fidelity Perinatal Simulation exposes them to real-life scenarios in a safe environment. Although student midwives' experiences need to be considered to make the simulation training work, these have been overlooked so far. To explore the experiences of last-year student midwives with High-Fidelity Perinatal Simulation training. A qualitative descriptive study, using three focus group conversations with last-year student midwives (n=24). Audio tapes were transcribed and a thematic content analysis was performed. The entire data set was coded according to recurrent or common themes. To achieve investigator triangulation and confirm themes, discussions among the researchers was incorporated in the analysis. Students found High-Fidelity Perinatal Simulation training to be a positive learning method that increased both their competence and confidence. Their experiences varied over the different phases of the High-Fidelity Perinatal Simulation training. Although uncertainty, tension, confusion and disappointment were experienced throughout the simulation trajectory, they reported that this did not affect their learning and confidence-building. As High-Fidelity Perinatal Simulation training constitutes a helpful learning experience in midwifery education, it could have a positive influence on maternal and neonatal outcomes. In the long term, it could therefore enhance the midwifery profession in several ways. The present study is an important first step in opening up the debate about the pedagogical use of High-Fidelity Perinatal Simulation training within midwifery education. Copyright © 2017 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

Large scale statistics for computational verification of grain growth simulations with experiments

International Nuclear Information System (INIS)

Demirel, Melik C.; Kuprat, Andrew P.; George, Denise C.; Straub, G.K.; Misra, Amit; Alexander, Kathleen B.; Rollett, Anthony D.

2002-01-01

It is known that by controlling microstructural development, desirable properties of materials can be achieved. The main objective of our research is to understand and control interface dominated material properties, and finally, to verify experimental results with computer simulations. We have previously showed a strong similarity between small-scale grain growth experiments and anisotropic three-dimensional simulations obtained from the Electron Backscattered Diffraction (EBSD) measurements. Using the same technique, we obtained 5170-grain data from an Aluminum-film (120 (micro)m thick) with a columnar grain structure. Experimentally obtained starting microstructure and grain boundary properties are input for the three-dimensional grain growth simulation. In the computational model, minimization of the interface energy is the driving force for the grain boundary motion. The computed evolved microstructure is compared with the final experimental microstructure, after annealing at 550 C. Characterization of the structures and properties of grain boundary networks (GBN) to produce desirable microstructures is one of the fundamental problems in interface science. There is an ongoing research for the development of new experimental and analytical techniques in order to obtain and synthesize information related to GBN. The grain boundary energy and mobility data were characterized by Electron Backscattered Diffraction (EBSD) technique and Atomic Force Microscopy (AFM) observations (i.e., for ceramic MgO and for the metal Al). Grain boundary energies are extracted from triple junction (TJ) geometry considering the local equilibrium condition at TJ's. Relative boundary mobilities were also extracted from TJ's through a statistical/multiscale analysis. Additionally, there are recent theoretical developments of grain boundary evolution in microstructures. In this paper, a new technique for three-dimensional grain growth simulations was used to simulate interface migration

Modeling, simulation, and experiments of coating growth on nanofibers

International Nuclear Information System (INIS)

Clemons, C. B.; Hamrick, P.; Heminger, J.; Kreider, K. L.; Young, G. W.; Buldum, A.; Evans, E.; Zhang, G.

2008-01-01

This work is a comparison of modeling and simulation results with experiments for an integrated experimental/modeling investigation of a procedure to coat nanofibers and core-clad nanostructures with thin film materials using plasma enhanced physical vapor deposition. In the experimental effort, electrospun polymer nanofibers are coated with metallic materials under different operating conditions to observe changes in the coating morphology. The modeling effort focuses on linking simple models at the reactor level, nanofiber level and atomic level to form a comprehensive model. The comprehensive model leads to the definition of an evolution equation for the coating free surface around an isolated nanofiber. This evolution equation was previously derived and solved under conditions of a nearly circular coating, with a concentration field that was only radially dependent and that was independent of the location of the coating free surface. These assumptions permitted the development of analytical expressions for the concentration field. The present work does not impose the above-mentioned conditions and considers numerical simulations of the concentration field that couple with level set simulations of the evolution equation for the coating free surface. Further, the cases of coating an isolated fiber as well as a multiple fiber mat are considered. Simulation results are compared with experimental results as the reactor pressure and power, as well as the nanofiber mat porosity, are varied

Corpuscular event-by-event simulation of quantum optics experiments: application to a quantum-controlled delayed-choice experiment

International Nuclear Information System (INIS)

De Raedt, Hans; Delina, M; Jin, Fengping; Michielsen, Kristel

2012-01-01

A corpuscular simulation model of optical phenomena that does not require knowledge of the solution of a wave equation of the whole system and reproduces the results of Maxwell's theory by generating detection events one by one is discussed. The event-based corpuscular model gives a unified description of multiple-beam fringes of a plane parallel plate and a single-photon Mach-Zehnder interferometer, Wheeler's delayed choice, photon tunneling, quantum eraser, two-beam interference, Einstein-Podolsky-Rosen-Bohm and Hanbury Brown-Twiss experiments. The approach is illustrated by applying it to a recent proposal for a quantum-controlled delayed choice experiment, demonstrating that also this thought experiment can be understood in terms of particle processes only.

Studies on defect evolution in steels: experiments and computer simulations

International Nuclear Information System (INIS)

Sundar, C.S.

2011-01-01

In this paper, we present the results of our on-going studies on steels that are being carried out with a view to develop radiation resistant steels. The focus is on the use of nano-dispersoids in alloys towards the suppression of void formation and eventual swelling under irradiation. Results on the nucleation and growth of TiC precipitates in Ti modified austenitic steels and investigations on nano Yttria particles in Fe - a model oxide dispersion ferritic steel will be presented. The experimental methods of ion beam irradiation and positron annihilation spectroscopy have been used to elucidate the role of minor alloying elements on swelling behaviour. Computer simulation of defect processes have been carried out using ab-initio methods, molecular dynamics and Monte Carlo simulations. Our perspectives on addressing the multi-scale phenomena of defect processes leading to radiation damage, through a judicious combination of experiments and simulations, would be presented. (author)

Flocking and self-defense: experiments and simulations of avian mobbing

Science.gov (United States)

Kane, Suzanne Amador

2011-03-01

We have performed motion capture studies in the field of avian mobbing, in which flocks of prey birds harass predatory birds. Our empirical studies cover both field observations of mobbing occurring in mid-air, where both predator and prey are in flight, and an experimental system using actual prey birds and simulated predator ``perch and wait'' strategies. To model our results and establish the effectiveness of mobbing flight paths at minimizing risk of capture while optimizing predator harassment, we have performed computer simulations using the actual measured trajectories of mobbing prey birds combined with model predator trajectories. To accurately simulate predator motion, we also measured raptor acceleration and flight dynamics, well as prey-pursuit strategies. These experiments and theoretical studies were all performed with undergraduate research assistants in a liberal arts college setting. This work illustrates how biological physics provides undergraduate research projects well-suited to the abilities of physics majors with interdisciplinary science interests and diverse backgrounds.

Combustion-Powered Actuation for Dynamic Stall Suppression - Simulations and Low-Mach Experiments

Science.gov (United States)

Matalanis, Claude G.; Min, Byung-Young; Bowles, Patrick O.; Jee, Solkeun; Wake, Brian E.; Crittenden, Tom; Woo, George; Glezer, Ari

2014-01-01

An investigation on dynamic-stall suppression capabilities of combustion-powered actuation (COMPACT) applied to a tabbed VR-12 airfoil is presented. In the first section, results from computational fluid dynamics (CFD) simulations carried out at Mach numbers from 0.3 to 0.5 are presented. Several geometric parameters are varied including the slot chordwise location and angle. Actuation pulse amplitude, frequency, and timing are also varied. The simulations suggest that cycle-averaged lift increases of approximately 4% and 8% with respect to the baseline airfoil are possible at Mach numbers of 0.4 and 0.3 for deep and near-deep dynamic-stall conditions. In the second section, static-stall results from low-speed wind-tunnel experiments are presented. Low-speed experiments and high-speed CFD suggest that slots oriented tangential to the airfoil surface produce stronger benefits than slots oriented normal to the chordline. Low-speed experiments confirm that chordwise slot locations suitable for Mach 0.3-0.4 stall suppression (based on CFD) will also be effective at lower Mach numbers.

Atomistic simulations in Si processing: Bridging the gap between atoms and experiments

International Nuclear Information System (INIS)

Marques, Luis A.; Pelaz, Lourdes; Lopez, Pedro; Aboy, Maria; Santos, Ivan; Barbolla, Juan

2005-01-01

With devices shrinking to nanometric scale, process simulation tools have to shift from continuum models to an atomistic description of the material. However, the limited sizes and time scales accessible for detailed atomistic techniques usually lead to the difficult task of relating the information obtained from simulations to experimental data. The solution consists of the use of a hierarchical simulation scheme: more fundamental techniques are employed to extract parameters and models that are then feed into less detailed simulators which allow direct comparison with experiments. This scheme will be illustrated with the modeling of the amorphization and recrystallization of Si, which has been defined as a key challenge in the last edition of the International Technology Roadmap for Semiconductors. The model is based on the bond defect or IV pair, which is used as the building block of the amorphous phase. The properties of this defect have been studied using ab initio methods and classical molecular dynamics techniques. It is shown that the recombination of this defect depends on the surrounding bond defects, which accounts for the cooperative nature of the amorphization and recrystallization processes. The implementation of this model in a kinetic Monte Carlo code allows extracting data directly comparable with experiments. This approach provides physical insight on the amorphization and recrystallization mechanisms and a tool for the optimization of solid-phase epitaxial-related processes

Interprofessional education and collaboration: A simulation-based learning experience focused on common and complementary skills in an acute care environment.

Science.gov (United States)

Cunningham, S; Foote, L; Sowder, M; Cunningham, C

2018-05-01

The purpose of this mixed-methods study was to explore from the participant's perspective the influence of an interprofessional simulation-based learning experience on understanding the roles and responsibilities of healthcare professionals in the acute care setting, interprofessional collaboration, and communication. Participating students from two professional programs completed the Readiness for Interprofessional Learning Scale (RIPLS) prior to and following the simulation experience to explore the influence of the simulation experience on students' perceptions of readiness to learn together. A Wilcoxon signed rank analysis was performed for each of the four subscales of the RIPLS: shared learning (<.001), teamwork and collaboration (<.001), professional identity (.042), and roles and responsibilities (.001). In addition, participating students were invited to participate in focus group interviews to discuss the effectiveness of the simulation experience. Three key themes were discovered: interprofessional teamwork, discovering roles and responsibilities, and increased confidence in treatment skills. The integration of interprofessional education through a simulation-based learning experience within the nursing and physical therapy professional programs provided a positive experience for the students. Simulation-based learning experiences may provide an opportunity for institutions to collaborate and provide additional engagement with healthcare professions that may not be represented within a single institution.

Chaos in reversed-field-pinch plasma simulation and experiment

International Nuclear Information System (INIS)

Watts, C.; Newman, D.E.; Sprott, J.C.

1994-01-01

We investigate the possibility that chaos and simple determinism are governing the dynamics of reversed-field-pinch (RFP) plasmas using data from both numerical simulations and experiment. A large repertoire of nonlinear-analysis techniques is used to identify low-dimensional chaos. These tools include phase portraits and Poincare sections, correlation dimension, the spectrum of Lyapunov exponents, and short-term predictability. In addition, nonlinear-noise-reduction techniques are applied to the experimental data in an attempt to extract any underlying deterministic dynamics. Two model systems are used to simulate the plasma dynamics. These are the DEBS computer code, which models global RFP dynamics, and the dissipative trapped-electron-mode model, which models drift-wave turbulence. Data from both simulations show strong indications of low-dimensional chaos and simple determinism. Experimental data were obtained from the Madison Symmetric Torus RFP and consist of a wide array of both global and local diagnostic signals. None of the signals shows any indication of low-dimensional chaos or other simple determinism. Moreover, most of the analysis tools indicate that the experimental system is very high dimensional with properties similar to noise. Nonlinear noise reduction is unsuccessful at extracting an underlying deterministic system

Adaptive Core Simulation Employing Discrete Inverse Theory - Part II: Numerical Experiments

International Nuclear Information System (INIS)

Abdel-Khalik, Hany S.; Turinsky, Paul J.

2005-01-01

Use of adaptive simulation is intended to improve the fidelity and robustness of important core attribute predictions such as core power distribution, thermal margins, and core reactivity. Adaptive simulation utilizes a selected set of past and current reactor measurements of reactor observables, i.e., in-core instrumentation readings, to adapt the simulation in a meaningful way. The companion paper, ''Adaptive Core Simulation Employing Discrete Inverse Theory - Part I: Theory,'' describes in detail the theoretical background of the proposed adaptive techniques. This paper, Part II, demonstrates several computational experiments conducted to assess the fidelity and robustness of the proposed techniques. The intent is to check the ability of the adapted core simulator model to predict future core observables that are not included in the adaption or core observables that are recorded at core conditions that differ from those at which adaption is completed. Also, this paper demonstrates successful utilization of an efficient sensitivity analysis approach to calculate the sensitivity information required to perform the adaption for millions of input core parameters. Finally, this paper illustrates a useful application for adaptive simulation - reducing the inconsistencies between two different core simulator code systems, where the multitudes of input data to one code are adjusted to enhance the agreement between both codes for important core attributes, i.e., core reactivity and power distribution. Also demonstrated is the robustness of such an application

Event-based computer simulation model of aspect-type experiments strictly satisfying Einstein's locality conditions

NARCIS (Netherlands)

De Raedt, Hans; De Raedt, Koen; Michielsen, Kristel; Keimpema, Koenraad; Miyashita, Seiji

2007-01-01

Inspired by Einstein-Podolsky-Rosen-Bohtn experiments with photons, we construct an event-based simulation model in which every essential element in the ideal experiment has a counterpart. The model satisfies Einstein's criterion of local causality and does not rely on concepts of quantum and

Empowering the registered nurses of tomorrow: students' perspectives of a simulation experience for recognising and managing a deteriorating patient.

Science.gov (United States)

Kelly, Michelle A; Forber, Jan; Conlon, Lisa; Roche, Michael; Stasa, Helen

2014-05-01

Recognising and responding to patients who are deteriorating are key aspects to improving outcomes. Simulations provide students with exposure to deteriorating patient scenarios and the role of nurses in such events. The number of programmes seeking to provide best possible simulation experiences is growing exponentially. Robust evaluation of these experiences is crucial to ensure maximum benefit. To assess the impact of a deteriorating patient simulation experience on students' technical and communication skills; and to determine if differing study programmes and years of previous nursing experience influenced students' responses and experiences. A convenience sample of final year nursing students (N=57) in a medical-surgical course at a large urban university completed a descriptive pre/post simulation survey rating their technical skills and communication abilities in recognising and responding to patient deterioration. Changes in pre/post scores were analysed including influence of study programme (3-year, 2-year Enrolled Nurse, 2-year Graduate Entry); gender; and years nursing experience (beyond course clinical practicum). Statistically significant improvements in post-simulation survey scores were demonstrated for combined student group data. Students with greater years of nursing experience had statistically higher scores than those with less experience in both pre- and post-surveys. Specific improvements were identified for: assessing a deteriorating patient; and in seeking help from the medical officer or external service. All student groups gained benefit in participating in a deteriorating patient simulation. For this group, greater years of prior nursing experience led to higher pre- and post-survey scores. The learning activity provided students an experience of the importance of recognising and responding to an acute situation in a timely manner which may be recalled in subsequent clinical situations. © 2013.

Improving Dental Experiences by Using Virtual Reality Distraction: A Simulation Study

Science.gov (United States)

Tanja-Dijkstra, Karin; Pahl, Sabine; P. White, Mathew; Andrade, Jackie; Qian, Cheng; Bruce, Malcolm; May, Jon; Moles, David R.

2014-01-01

Dental anxiety creates significant problems for both patients and the dental profession. Some distraction interventions are already used by healthcare professionals to help patients cope with unpleasant procedures. The present study is novel because it a) builds on evidence that natural scenery is beneficial for patients, and b) uses a Virtual Reality (VR) representation of nature to distract participants. Extending previous work that has investigated pain and anxiety during treatment, c) we also consider the longer term effects in terms of more positive memories of the treatment, building on a cognitive theory of memory (Elaborated Intrusions). Participants (n = 69) took part in a simulated dental experience and were randomly assigned to one of three VR conditions (active vs. passive vs. control). In addition, participants were distinguished into high and low dentally anxious according to a median split resulting in a 3×2 between-subjects design. VR distraction in a simulated dental context affected memories a week later. The VR distraction had effects not only on concurrent experiences, such as perceived control, but longitudinally upon the vividness of memories after the dental experience had ended. Participants with higher dental anxiety (for whom the dental procedures were presumably more aversive) showed a greater reduction in memory vividness than lower dental-anxiety participants. This study thus suggests that VR distractions can be considered as a relevant intervention for cycles of care in which people’s previous experiences affect their behaviour for future events. PMID:24621518

Improving dental experiences by using virtual reality distraction: a simulation study.

Science.gov (United States)

Tanja-Dijkstra, Karin; Pahl, Sabine; White, Mathew P; Andrade, Jackie; Qian, Cheng; Bruce, Malcolm; May, Jon; Moles, David R

2014-01-01

Dental anxiety creates significant problems for both patients and the dental profession. Some distraction interventions are already used by healthcare professionals to help patients cope with unpleasant procedures. The present study is novel because it a) builds on evidence that natural scenery is beneficial for patients, and b) uses a Virtual Reality (VR) representation of nature to distract participants. Extending previous work that has investigated pain and anxiety during treatment, c) we also consider the longer term effects in terms of more positive memories of the treatment, building on a cognitive theory of memory (Elaborated Intrusions). Participants (n = 69) took part in a simulated dental experience and were randomly assigned to one of three VR conditions (active vs. passive vs. control). In addition, participants were distinguished into high and low dentally anxious according to a median split resulting in a 3×2 between-subjects design. VR distraction in a simulated dental context affected memories a week later. The VR distraction had effects not only on concurrent experiences, such as perceived control, but longitudinally upon the vividness of memories after the dental experience had ended. Participants with higher dental anxiety (for whom the dental procedures were presumably more aversive) showed a greater reduction in memory vividness than lower dental-anxiety participants. This study thus suggests that VR distractions can be considered as a relevant intervention for cycles of care in which people's previous experiences affect their behaviour for future events.

Improving dental experiences by using virtual reality distraction: a simulation study.

Directory of Open Access Journals (Sweden)

Karin Tanja-Dijkstra

Full Text Available Dental anxiety creates significant problems for both patients and the dental profession. Some distraction interventions are already used by healthcare professionals to help patients cope with unpleasant procedures. The present study is novel because it a builds on evidence that natural scenery is beneficial for patients, and b uses a Virtual Reality (VR representation of nature to distract participants. Extending previous work that has investigated pain and anxiety during treatment, c we also consider the longer term effects in terms of more positive memories of the treatment, building on a cognitive theory of memory (Elaborated Intrusions. Participants (n = 69 took part in a simulated dental experience and were randomly assigned to one of three VR conditions (active vs. passive vs. control. In addition, participants were distinguished into high and low dentally anxious according to a median split resulting in a 3×2 between-subjects design. VR distraction in a simulated dental context affected memories a week later. The VR distraction had effects not only on concurrent experiences, such as perceived control, but longitudinally upon the vividness of memories after the dental experience had ended. Participants with higher dental anxiety (for whom the dental procedures were presumably more aversive showed a greater reduction in memory vividness than lower dental-anxiety participants. This study thus suggests that VR distractions can be considered as a relevant intervention for cycles of care in which people's previous experiences affect their behaviour for future events.

Nonlinear gyrokinetic simulations of the I-mode high confinement regime and comparisons with experiment

Energy Technology Data Exchange (ETDEWEB)

White, A. E., E-mail: whitea@mit.edu; Howard, N. T.; Creely, A. J.; Chilenski, M. A.; Greenwald, M.; Hubbard, A. E.; Hughes, J. W.; Marmar, E.; Rice, J. E.; Sierchio, J. M.; Sung, C.; Walk, J. R.; Whyte, D. G. [MIT Plasma Science and Fusion Center, Cambridge, Massachusetts 02139 (United States); Mikkelsen, D. R.; Edlund, E. M.; Kung, C. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08540 (United States); Holland, C. [University of California, San Diego (UCSD) San Diego, California 92093 (United States); Candy, J.; Petty, C. C. [General Atomics, P.O. Box 85608, San Diego, California 92186 (United States); Reinke, M. L. [York University, Heslington, York YO10 5DD (United Kingdom); and others

2015-05-15

For the first time, nonlinear gyrokinetic simulations of I-mode plasmas are performed and compared with experiment. I-mode is a high confinement regime, featuring energy confinement similar to H-mode, but without enhanced particle and impurity particle confinement [D. G. Whyte et al., Nucl. Fusion 50, 105005 (2010)]. As a consequence of the separation between heat and particle transport, I-mode exhibits several favorable characteristics compared to H-mode. The nonlinear gyrokinetic code GYRO [J. Candy and R. E. Waltz, J Comput. Phys. 186, 545 (2003)] is used to explore the effects of E × B shear and profile stiffness in I-mode and compare with L-mode. The nonlinear GYRO simulations show that I-mode core ion temperature and electron temperature profiles are more stiff than L-mode core plasmas. Scans of the input E × B shear in GYRO simulations show that E × B shearing of turbulence is a stronger effect in the core of I-mode than L-mode. The nonlinear simulations match the observed reductions in long wavelength density fluctuation levels across the L-I transition but underestimate the reduction of long wavelength electron temperature fluctuation levels. The comparisons between experiment and gyrokinetic simulations for I-mode suggest that increased E × B shearing of turbulence combined with increased profile stiffness are responsible for the reductions in core turbulence observed in the experiment, and that I-mode resembles H-mode plasmas more than L-mode plasmas with regards to marginal stability and temperature profile stiffness.

Development of Laser-Induced Fluorescence Diagnostic for the Paul Trap Simulator Experiment

CERN Document Server

Chung, Moses; Efthimion, Philip; Gilson, Erik P; Majeski, Richard; Startsev, Edward

2005-01-01

The Paul Trap Simulator Experiment (PTSX) is a cylindrical Paul trap whose purpose is to simulate the nonlinear dynamics of intense charged particle beam propagation in alternating-gradient magnetic transport systems. For the in-situ measurement of the transverse ion density profile in the PTSX device, which is essential for the study of beam mismatch and halo particle production, a laser-induced fluorescence diagnostic system is being developed. Instead of cesium, which has been used in the initial phase of the PTSX experiment, barium has been selected as the preferred ion for the laser-induced fluorescence diagnostic. The installation of the barium ion source and the characterization of the tunable dye laser system are discussed. The design of the collection optics with an intensified CCD camera system is also discussed. Finally, initial test results using the laser-induced fluorescence diagnostic will be presented.

Computational simulation of natural circulation and rewetting experiments using the TRAC/PF1 code

International Nuclear Information System (INIS)

Silva, J.D. da.

1994-05-01

In this work the TRAC code was used to simulate experiments of natural circulation performed in the first Brazilian integral test facility at (COPESP), Sao Paulo and a rewetting experiment in a single tube test section carried out at CDTN, Belo Horizonte, Brazil. In the first simulation the loop behavior in two transient conditions with different thermal power, namely 20 k W and 120 k W, was verified in the second one the quench front propagation, the liquid mass collected in the carry over measuring tube and the wall temperature at different elevations during the flooding experiment was measured. A comparative analysis, for code consistency, shows a good agreement between the code results and experimental data, except for the quench from velocity. (author). 15 refs, 19 figs, 12 tabs

Local mechanical properties of LFT injection molded parts: Numerical simulations versus experiments

Science.gov (United States)

Desplentere, F.; Soete, K.; Bonte, H.; Debrabandere, E.

2014-05-01

In predictive engineering for polymer processes, the proper prediction of material microstructure from known processing conditions and constituent material properties is a critical step forward properly predicting bulk properties in the finished composite. Operating within the context of long-fiber thermoplastics (LFT, length Autodesk Simulation Moldflow Insight 2014 software has been used. In this software, a fiber breakage algorithm for the polymer flow inside the mold is available. Using well known micro mechanic formulas allow to combine the local fiber length with the local orientation into local mechanical properties. Different experiments were performed using a commercially available glass fiber filled compound to compare the measured data with the numerical simulation results. In this investigation, tensile tests and 3 point bending tests are considered. To characterize the fiber length distribution of the polymer melt entering the mold (necessary for the numerical simulations), air shots were performed. For those air shots, similar homogenization conditions were used as during the injection molding tests. The fiber length distribution is characterized using automated optical method on samples for which the matrix material is burned away. Using the appropriate settings for the different experiments, good predictions of the local mechanical properties are obtained.

Montecarlo Simulations for a Lep Experiment with Unix Workstation Clusters

Science.gov (United States)

Bonesini, M.; Calegari, A.; Rossi, P.; Rossi, V.

Modular systems of RISC CPU based computers have been implemented for large productions of Montecarlo simulated events for the DELPHI experiment at CERN. From a pilot system based on DEC 5000 CPU’s, a full size system based on a CONVEX C3820 UNIX supercomputer and a cluster of HP 735 workstations has been put into operation as a joint effort between INFN Milano and CILEA.

Nanojets, Electrospray, and Ion Field Evaporation: Molecular Dynamics Simulations and Laboratory Experiments

National Research Council Canada - National Science Library

Luedtke, W. D; Landman, Uzi; Chiu, Y. H; Levandier, D. J; Dressler, R. A; Sok, S; Gordon, M. S

2008-01-01

... experiment and using molecular dynamics (MD) simulations. The electrospray source is operated in a Taylor cone-jet mode, with the nanojet that forms being characterized by high surface-normal electric field strengths in the vicinity of I V/nm...

Ion bombardment induced smoothing of amorphous metallic surfaces: Experiments versus computer simulations

International Nuclear Information System (INIS)

Vauth, Sebastian; Mayr, S. G.

2008-01-01

Smoothing of rough amorphous metallic surfaces by bombardment with heavy ions in the low keV regime is investigated by a combined experimental-simulational study. Vapor deposited rough amorphous Zr 65 Al 7.5 Cu 27.5 films are the basis for systematic in situ scanning tunneling microscopy measurements on the smoothing reaction due to 3 keV Kr + ion bombardment. The experimental results are directly compared to the predictions of a multiscale simulation approach, which incorporates stochastic rate equations of the Langevin type in combination with previously reported classical molecular dynamics simulations [Phys. Rev. B 75, 224107 (2007)] to model surface smoothing across length and time scales. The combined approach of experiments and simulations clearly corroborates a key role of ion induced viscous flow and ballistic effects in low keV heavy ion induced smoothing of amorphous metallic surfaces at ambient temperatures

Validation of a numerical FSI simulation of an aortic BMHV by in vitro PIV experiments.

Science.gov (United States)

Annerel, S; Claessens, T; Degroote, J; Segers, P; Vierendeels, J

2014-08-01

In this paper, a validation of a recently developed fluid-structure interaction (FSI) coupling algorithm to simulate numerically the dynamics of an aortic bileaflet mechanical heart valve (BMHV) is performed. This validation is done by comparing the numerical simulation results with in vitro experiments. For the in vitro experiments, the leaflet kinematics and flow fields are obtained via the particle image velocimetry (PIV) technique. Subsequently, the same case is numerically simulated by the coupling algorithm and the resulting leaflet kinematics and flow fields are obtained. Finally, the results are compared, revealing great similarity in leaflet motion and flow fields between the numerical simulation and the experimental test. Therefore, it is concluded that the developed algorithm is able to capture very accurately all the major leaflet kinematics and dynamics and can be used to study and optimize the design of BMHVs. Copyright © 2014 IPEM. Published by Elsevier Ltd. All rights reserved.

Design of preconcentration flow-sheet for processing Bhimunipatnam beach sands using pilot plant experiments and computer simulation

International Nuclear Information System (INIS)

Padmanabhan, N.P.H.; Sridhar, U.

1993-01-01

Simulation was carried out using a beach sand beneficiation plant simulator software, SANDBEN, currently being developed in Indian School of Mines, Dhanbad, and the results were compared and analyzed with those obtained by actual pilot plant experiments on a beach sand sample from Bhimunipatnam deposit. The software is discussed and its capabilities and limitations are highlighted. An optimal preconcentrator flow-sheet for processing Bhimunipatnam beach sand was developed by simulation and using the results of the pilot plant experiments. (author). 13 refs., 2 tabs., 3 figs

Sound propagation in dry granular materials : discrete element simulations, theory, and experiments

NARCIS (Netherlands)

Mouraille, O.J.P.

2009-01-01

In this study sound wave propagation through different types of dry confined granular systems is studied. With three-dimensional discrete element simulations, theory and experiments, the influence of several micro-scale properties: friction, dissipation, particle rotation, and contact disorder, on

A gas puff experiment for partial simulation of compact toroid formation on MARAUDER

International Nuclear Information System (INIS)

Englert, S.E.; Englert, T.J.; Degnan, J.H.; Gahl, J.M.

1994-01-01

Preliminary results will be reported of a single valve gas puff experiment to determine spatial and spectral distribution of a gas during the early ionization stages. This experiment has been developed as a diagnostic test-bed for partial simulation of compact toroid formation on MARAUDER. The manner in which the experimental hardware has been designed allows for a wide range of diagnostic access to evaluate early time evolution of the ionization process. This evaluation will help contribute to a clearer understanding of the initial conditions for the formation stage of the compact toroid in the MARAUDER experiment, where 60 of the same puff valves are used. For the experiment, a small slice of the MARAUDER cylindrical gas injection and expansion region geometry have been re-created but in cartesian coordinates. All of the conditions in the experiment adhere as closely as possible to the MARAUDER experiment. The timing, current rise time, capacitance, resistance and inductance are appropriate to both the simulation of one of the 60 puff valves and current delivery to the load. Both time-resolved images and spectral data have been gathered for visible light emission of the plasma. Processed images reveal characteristics of spatial distribution of the current. Spectral data provide information with respect to electron temperature and density, and entrainment of contaminants

Extracting Synthetic Multi-Cluster Platform Configurations from Grid'5000 for Driving Simulation Experiments

OpenAIRE

Suter , Frédéric; Casanova , Henri

2007-01-01

This report presents a collection of synthetic but realistic distributed computing platform configurations. These configurations are intended for simulation experiments in the study of parallel applications on multi-cluster platforms.

The potential of satellite spectro-imagery for monitoring CO2 emissions from large cities

Science.gov (United States)

Broquet, Grégoire; Bréon, François-Marie; Renault, Emmanuel; Buchwitz, Michael; Reuter, Maximilian; Bovensmann, Heinrich; Chevallier, Frédéric; Wu, Lin; Ciais, Philippe

2018-02-01

This study assesses the potential of 2 to 10 km resolution imagery of CO2 concentrations retrieved from the shortwave infrared measurements of a space-borne passive spectrometer for monitoring the spatially integrated emissions from the Paris area. Such imagery could be provided by missions similar to CarbonSat, which was studied as a candidate Earth Explorer 8 mission by the European Space Agency (ESA). This assessment is based on observing system simulation experiments (OSSEs) with an atmospheric inversion approach at city scale. The inversion system solves for hourly city CO2 emissions and natural fluxes, or for these fluxes per main anthropogenic sector or ecosystem, during the 6 h before a given satellite overpass. These 6 h correspond to the period during which emissions produce CO2 plumes that can be identified on the image from this overpass. The statistical framework of the inversion accounts for the existence of some prior knowledge with 50 % uncertainty on the hourly or sectorial emissions, and with ˜ 25 % uncertainty on the 6 h mean emissions, from an inventory based on energy use and carbon fuel consumption statistics. The link between the hourly or sectorial emissions and the vertically integrated column of CO2 observed by the satellite is simulated using a coupled flux and atmospheric transport model. This coupled model is built with the information on the spatial and temporal distribution of emissions from the emission inventory produced by the local air-quality agency (Airparif) and a 2 km horizontal resolution atmospheric transport model. Tests are conducted for different realistic simulations of the spatial coverage, resolution, precision and accuracy of the imagery from sun-synchronous polar-orbiting missions, corresponding to the specifications of CarbonSat and Sentinel-5 or extrapolated from these specifications. First, OSSEs are conducted with a rather optimistic configuration in which the inversion system is perfectly informed about the

The potential of satellite spectro-imagery for monitoring CO2 emissions from large cities

Directory of Open Access Journals (Sweden)

G. Broquet

2018-02-01

Full Text Available This study assesses the potential of 2 to 10 km resolution imagery of CO2 concentrations retrieved from the shortwave infrared measurements of a space-borne passive spectrometer for monitoring the spatially integrated emissions from the Paris area. Such imagery could be provided by missions similar to CarbonSat, which was studied as a candidate Earth Explorer 8 mission by the European Space Agency (ESA. This assessment is based on observing system simulation experiments (OSSEs with an atmospheric inversion approach at city scale. The inversion system solves for hourly city CO2 emissions and natural fluxes, or for these fluxes per main anthropogenic sector or ecosystem, during the 6 h before a given satellite overpass. These 6 h correspond to the period during which emissions produce CO2 plumes that can be identified on the image from this overpass. The statistical framework of the inversion accounts for the existence of some prior knowledge with 50 % uncertainty on the hourly or sectorial emissions, and with ∼ 25 % uncertainty on the 6 h mean emissions, from an inventory based on energy use and carbon fuel consumption statistics. The link between the hourly or sectorial emissions and the vertically integrated column of CO2 observed by the satellite is simulated using a coupled flux and atmospheric transport model. This coupled model is built with the information on the spatial and temporal distribution of emissions from the emission inventory produced by the local air-quality agency (Airparif and a 2 km horizontal resolution atmospheric transport model. Tests are conducted for different realistic simulations of the spatial coverage, resolution, precision and accuracy of the imagery from sun-synchronous polar-orbiting missions, corresponding to the specifications of CarbonSat and Sentinel-5 or extrapolated from these specifications. First, OSSEs are conducted with a rather optimistic configuration in which the inversion system

Exploring the Lived Experiences of Participants in Simulation-Based Learning Activities

Science.gov (United States)

Beard, Rachael

2013-01-01

There is currently a small body of research on the experiences of participants, both facilitators and learners, during simulated mock codes (cardiac arrest) in the healthcare setting. This study was based on a practitioner's concerns that mock codes are facilitated differently among educators, mock codes are not aligned with andragogy theory of…

Care-givers' reflections on an ethics education immersive simulation care experience: A series of epiphanous events.

Science.gov (United States)

Gallagher, Ann; Peacock, Matthew; Zasada, Magdalena; Coucke, Trees; Cox, Anna; Janssens, Nele

2017-07-01

There has been little previous scholarship regarding the aims, options and impact of ethics education on residential care-givers. This manuscript details findings from a pragmatic cluster trial evaluating the impact of three different approaches to ethics education. The focus of the article is on one of the interventions, an immersive simulation experience. The simulation experience required residential care-givers to assume the profile of elderly care-recipients for a 24-hr period. The care-givers were student nurses. The project was reviewed favourably by a university ethics committee, and participants provided informed consent. Data from six postsimulation experience focus groups were analysed thematically and three themes were identified: the experience of vulnerability, dignity in care and the organisation of care. Findings suggest that the immersive simulation experience had a powerful immediate impact as participants described epiphanous insights relating to their care experiences. It is suggested that reflecting on and recording epiphanous events has the potential to sustain ethical care practices. Further research is required to evaluate the impact of different ethics education interventions in different cultural contexts. Exploration is also required regarding the meaning and significance of care epiphanies, those "most delicate and evanescent of moments," for the sustainability of ethical care. © 2016 John Wiley & Sons Ltd.

The Challenges of Open Source Software in IT Adoption

DEFF Research Database (Denmark)

Holm Larsen, Michael; Holck, Jesper; Pedersen, Mogens Kuhn

2004-01-01

Abstract: The paper presents an explorative study of Open Source Software (OSS) focusing on the managerial decisions for acquisition of OSS. Based on three case studies we argue that whereas small organizations often may chose adoption of OSS expecting significant cost savings, a major barrier...... for larger organizations' adoption of OSS lies in the organizations' consolidation of the enterprise architectures, in addition to that OSS will not be adopted before satisfactory delivery and procurement models for OSS are established. Keywords: Open Source Software, OSS, Enterprise Architecture, Total Cost...

The sixfold segmented MINIBALL module simulation and experiment

International Nuclear Information System (INIS)

Gund, C.

2000-01-01

MINIBALL, the new γ-ray spectrometer for REX-ISOLDE and other radioactive beam experiments consists of 42 encapsulated, six-fold segmented germanium modules of the EUROBALL geometry, clustered in cryostats of three modules (3-Cluster). The high full-energy-peak efficiency of the spectrometer allows γ-ray spectroscopy of low intensity beams, the high granularity permits a good energy resolution after Doppler correction, in spite of the high velocity of the γ-emitting reaction products. Detailed simulations were performed to investigate the physical limits of the detector granularity using the segment energies and pulse-shape analysis. Algorithms to locate the γ-ray entry point into the detector were developed. Special attention was paid to the application of these algorithms to the 3-Cluster detector. A position resolution of the γ-ray entry point of 10 mm x 10 mm was obtained and experimentally verified. Finally predictions for the energy resolution after Doppler correction were deduced. An experiment was performed to investigate the problems of low-intensity experiments in inverse kinematics. The use of the MINIBALL germanium modules in conjunction with the REX-ISOLDE PPAC allowed to solve these problems, a good energy resolution and a significant background suppression could be achieved. (orig.)

Compaction wave profiles: Simulations of gas gun experiments

International Nuclear Information System (INIS)

Menikoff, Ralph

2001-01-01

Mesoscale simulations of a compaction wave in a granular bed of HMX have been performed. The grains are fully resolved in order that the compaction, i.e., the porosity behind the wave front, is determined by the elastic-plastic response of the grains rather than by an empirical law for the porosity as a function of pressure. Numerical wave profiles of the pressure and velocity are compared with data from a gas gun experiment. The experiment used an initial porosity of 36%, and the wave had a pressure comparable to the yield strength of the grains. The profiles are measured at the front and back of the granular bed. The transit time for the compaction wave to propagate between the gauges determines the wave speed. The wave speed depends on the porosity behind the wave and is affected by the strength model. The yield strength needed to match the experimental wave speed is discussed. Analysis of the lead wave through the granular bed, based on impedance matches using the Hugoniot loci, indicates that the compaction wave triggers a small amount of burn, less than 1% mass fraction, on the microsecond time scale of the experiment. copyright 2001 American Institute of Physics

Sensitivity analysis for CORSOR models simulating fission product release in LOFT-LP-FP-2 severe accident experiment

Energy Technology Data Exchange (ETDEWEB)

Hoseyni, Seyed Mohsen [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Dept. of Basic Sciences; Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Young Researchers and Elite Club; Pourgol-Mohammad, Mohammad [Sahand Univ. of Technology, Tabriz (Iran, Islamic Republic of). Dept. of Mechanical Engineering; Yousefpour, Faramarz [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of)

2017-03-15

This paper deals with simulation, sensitivity and uncertainty analysis of LP-FP-2 experiment of LOFT test facility. The test facility simulates the major components and system response of a pressurized water reactor during a LOCA. MELCOR code is used for predicting the fission product release from the core fuel elements in LOFT LP-FP-2 experiment. Moreover, sensitivity and uncertainty analysis is performed for different CORSOR models simulating release of fission products in severe accident calculations for nuclear power plants. The calculated values for the fission product release are compared under different modeling options to the experimental data available from the experiment. In conclusion, the performance of 8 CORSOR modeling options is assessed for available modeling alternatives in the code structure.

A uniform geometry description for simulation, reconstruction and visualization in the BESIII experiment

Energy Technology Data Exchange (ETDEWEB)

Liang Yutie [School of Physics and State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing 100871 (China)], E-mail: liangyt@hep.pku.edu.cn; Zhu Bo; You Zhengyun; Liu Kun; Ye Hongxue; Xu Guangming; Wang Siguang [School of Physics and State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing 100871 (China); Li Weidong; Liu Huaimin; Mao Zepu [Institute of High Energy Physics, CAS, Beijing 100049 (China); Mao Yajun [School of Physics and State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing 100871 (China)

2009-05-21

In the BESIII experiment, the simulation, reconstruction and visualization were designed to use the same geometry description in order to ensure the consistency of the geometry for different applications. Geometry Description Markup Language (GDML), an application-independent persistent format for describing the geometries of detectors, was chosen and met our requirement. The detector of BESIII was described with GDML and then used in Geant4-based simulation and ROOT-based reconstruction and visualization.

A uniform geometry description for simulation, reconstruction and visualization in the BESIII experiment

International Nuclear Information System (INIS)

Liang Yutie; Zhu Bo; You Zhengyun; Liu Kun; Ye Hongxue; Xu Guangming; Wang Siguang; Li Weidong; Liu Huaimin; Mao Zepu; Mao Yajun

2009-01-01

In the BESIII experiment, the simulation, reconstruction and visualization were designed to use the same geometry description in order to ensure the consistency of the geometry for different applications. Geometry Description Markup Language (GDML), an application-independent persistent format for describing the geometries of detectors, was chosen and met our requirement. The detector of BESIII was described with GDML and then used in Geant4-based simulation and ROOT-based reconstruction and visualization.

Simulation of the PHEBUS FPT-1 experiment using MELCOR and exploration of the primary core degradation mechanism

International Nuclear Information System (INIS)

Wang, Jun; Corradini, Michael L.; Fu, Wen; Haskin, Troy; Zhang, Yapei; Tian, Wenxi; Su, Guanghui; Qiu, Suizheng

2015-01-01

Highlights: • Core degradation evaluation is an important process in risk analysis. • PHEBUS experiment was simulated using MELCOR. • The results confirm the validity of MELCOR’s simulation of the PHEBUS experiment. • These results are used to analyze the mode and behavior of core degradation. - Abstract: Core degradation evaluation of probability, progression and consequences of a core degradation accident is critical for evaluation of risk as well as its mitigation. However, research and modeling of severe accidents to date are limited, and their accuracy in predicting severe accident consequences is still insufficient. It is therefore important to explore the mechanisms of core degradation and to develop mitigation measures for severe accidents. PHEBUS FPT1 is a typical and classic core degradation experiment. MELCOR is a world famous severe accident analysis code developed by Sandia National Lab that has seen wide application, a broad user base, and a number of supporting experiments. The PHEBUS experiment was simulated using MELCOR in this paper. Experimental data on, thermal power and steam mass flow rates are used to determine average pressure, energy distribution, molten mass, temperature of the fuel, and hydrogen generation. Data from the PHEBUS experiment and Cho’s calculations are used to compare the average pressure, several fuel temperatures and the hydrogen generation rate. The results confirm the validity of MELCOR’s simulation of the PHEBUS experiment. The temperature distribution of the core is provided. These results are used to determine the mode and behavior of core degradation with the intent of building a foundation for further research

Simultaneous ion and neutral evaporation in aqueous nanodrops: experiment, theory, and molecular dynamics simulations.

Science.gov (United States)

Higashi, Hidenori; Tokumi, Takuya; Hogan, Christopher J; Suda, Hiroshi; Seto, Takafumi; Otani, Yoshio

2015-06-28

We use a combination of tandem ion mobility spectrometry (IMS-IMS, with differential mobility analyzers), molecular dynamics (MD) simulations, and analytical models to examine both neutral solvent (H2O) and ion (solvated Na(+)) evaporation from aqueous sodium chloride nanodrops. For experiments, nanodrops were produced via electrospray ionization (ESI) of an aqueous sodium chloride solution. Two nanodrops were examined in MD simulations: a 2500 water molecule nanodrop with 68 Na(+) and 60 Cl(-) ions (an initial net charge of z = +8), and (2) a 1000 water molecule nanodrop with 65 Na(+) and 60 Cl(-) ions (an initial net charge of z = +5). Specifically, we used MD simulations to examine the validity of a model for the neutral evaporation rate incorporating both the Kelvin (surface curvature) and Thomson (electrostatic) influences, while both MD simulations and experimental measurements were compared to predictions of the ion evaporation rate equation of Labowsky et al. [Anal. Chim. Acta, 2000, 406, 105-118]. Within a single fit parameter, we find excellent agreement between simulated and modeled neutral evaporation rates for nanodrops with solute volume fractions below 0.30. Similarly, MD simulation inferred ion evaporation rates are in excellent agreement with predictions based on the Labowsky et al. equation. Measurements of the sizes and charge states of ESI generated NaCl clusters suggest that the charge states of these clusters are governed by ion evaporation, however, ion evaporation appears to have occurred with lower activation energies in experiments than was anticipated based on analytical calculations as well as MD simulations. Several possible reasons for this discrepancy are discussed.

Gyrokinetic Simulation of Global Turbulent Transport Properties in Tokamak Experiments

Energy Technology Data Exchange (ETDEWEB)

Wang, W.X.; Lin, Z.; Tang, W.M.; Lee, W.W.; Ethier, S.; Lewandowski, J.L.V.; Rewoldt, G.; Hahm, T.S.; Manickam, J.

2006-01-01

A general geometry gyro-kinetic model for particle simulation of plasma turbulence in tokamak experiments is described. It incorporates the comprehensive influence of noncircular cross section, realistic plasma profiles, plasma rotation, neoclassical (equilibrium) electric fields, and Coulomb collisions. An interesting result of global turbulence development in a shaped tokamak plasma is presented with regard to nonlinear turbulence spreading into the linearly stable region. The mutual interaction between turbulence and zonal flows in collisionless plasmas is studied with a focus on identifying possible nonlinear saturation mechanisms for zonal flows. A bursting temporal behavior with a period longer than the geodesic acoustic oscillation period is observed even in a collisionless system. Our simulation results suggest that the zonal flows can drive turbulence. However, this process is too weak to be an effective zonal flow saturation mechanism.

Fuel rod simulator effects in flooding experiments single rod tests

International Nuclear Information System (INIS)

Nishida, M.

1984-09-01

The influence of a gas filled gap between cladding and pellet on the quenching behavior of a PWR fuel rod during the reflood phase of a LOCA has been investigated. Flooding experiments were conducted with a short length electrically heated single fuel rod simulator surrounded by glass housing. The gap of 0.05 mm width between the Zircaloy cladding and the internal Al 2 O 3 pellets of the rod was filled either wit helium or with argon to vary the radial heat resistance across the gap. This report presents some typical data and an evaluation of the reflood behavior of the fuel rod simulator used. The results show that the quench front propagates faster for increasing heat resistance in the gap between cladding and heat source of the rod. (orig.) [de

Numerical simulation studies of the LBNL heavy-ion beam combiner experiment

International Nuclear Information System (INIS)

Fawley, W.M.; Seidl, P.; Haber, I.; Friedman, A.; Grote, D.P.

1997-01-01

Transverse beam combining is a cost-saving option employed in many designs for heavy-ion inertial fusion energy drivers. A major area of interest, both theoretically and experimentally, is the resultant transverse phase space dilution during the beam merging process. Currently, a prototype combining experiment is underway at LBNL and we have employed a variety of numerical descriptions to aid in both the initial design of the experiment data. These range from simple envelope codes to detailed 2- and 3-D PIC simulations. We compare the predictions of the different numerical models to each other and to experimental data at different longitudinal positions

Modeling, Simulation, and Experiment of Switched Reluctance Ocean Current Generator System

Directory of Open Access Journals (Sweden)

Hao Chen

2013-01-01

Full Text Available This paper presents nonlinear simulation model of switched reluctance (SR ocean current generator system on MATLAB/SIMULINK with describing the structure of generator system. The developed model is made up of main model, rotor position calculation module, controller module, gate module, power converter module, phase windings module, flux-linkage module, torque module, and power calculation module. The magnetization curves obtained by two-dimensional finite-element electromagnetic field calculation and the conjugated magnetic energy graphics obtained from the three-dimensional graphics of flux linkage are stored in the “Lookup Table” modules on MATLAB/SIMULINK. The hardware of the developed three-phase 12/8 structure SR ocean current generator system prototype with the experimental platform is presented. The simulation of the prototype is performed by the developed models, and the experiments have been carried out under the same condition with different output power, turn-off angle, and rotor speed. The simulated phase current waveforms agree well with the tested phase current waveforms experimentally. The simulated output voltage curves agree well with the tested output voltage curves experimentally. It is shown that the developed nonlinear simulation model of the three-phase 12/8 structure SR ocean current generator system is valid.

Theoretical Simulations and Ultrafast Pump-probe Spectroscopy Experiments in Pigment-protein Photosynthetic Complexes

Energy Technology Data Exchange (ETDEWEB)

Buck, D. R. [Iowa State Univ., Ames, IA (United States)

2000-09-12

Theoretical simulations and ultrafast pump-probe laser spectroscopy experiments were used to study photosynthetic pigment-protein complexes and antennae found in green sulfur bacteria such as Prosthecochloris aestuarii, Chloroflexus aurantiacus, and Chlorobium tepidum. The work focused on understanding structure-function relationships in energy transfer processes in these complexes through experiments and trying to model that data as we tested our theoretical assumptions with calculations. Theoretical exciton calculations on tubular pigment aggregates yield electronic absorption spectra that are superimpositions of linear J-aggregate spectra. The electronic spectroscopy of BChl c/d/e antennae in light harvesting chlorosomes from Chloroflexus aurantiacus differs considerably from J-aggregate spectra. Strong symmetry breaking is needed if we hope to simulate the absorption spectra of the BChl c antenna. The theory for simulating absorption difference spectra in strongly coupled photosynthetic antenna is described, first for a relatively simple heterodimer, then for the general N-pigment system. The theory is applied to the Fenna-Matthews-Olson (FMO) BChl a protein trimers from Prosthecochloris aestuarii and then compared with experimental low-temperature absorption difference spectra of FMO trimers from Chlorobium tepidum. Circular dichroism spectra of the FMO trimer are unusually sensitive to diagonal energy disorder. Substantial differences occur between CD spectra in exciton simulations performed with and without realistic inhomogeneous distribution functions for the input pigment diagonal energies. Anisotropic absorption difference spectroscopy measurements are less consistent with 21-pigment trimer simulations than 7-pigment monomer simulations which assume that the laser-prepared states are localized within a subunit of the trimer. Experimental anisotropies from real samples likely arise from statistical averaging over states with diagonal energies shifted by

Application of the TRAC-PD2 code to the simulation of the CANON experiment

International Nuclear Information System (INIS)

Neves Conti, T. das; Freitas, R.L.

1985-01-01

A comparison between the TRAC -PD2 code calculations and results from the CANON experiment is presented. The CANON experiment simulates the loss of coolant accident through the depressurization of a horizontal tube containing water at different temperatures. The experiment consist of the instantaneous rupture at one end of the tubing and the corresponding pressure and void fraction measurements during the transient. The comparison shows that the TRAC-PD2 code predicts satisfactorily the pressure and void fraction evolution in the CANON experiment. (F.C.) [pt

Does Merger Simulation Work? A "Natural Experiment" in the Swedish Analgesics Market Market

OpenAIRE

Björnerstedt, Jonas; Verboven, Frank

2012-01-01

We exploit a natural experiment associated with a large merger in the Swedish market for analgesics (painkillers). We confront the predictions from a merger simulation study, as conducted during the investigation, with the actual merger effects over a two-year comparison window. The merger simulation model is based on a constant expenditures specification for the nested logit model (as an alternative to the typical unit demand specification). The model predicts a large price increase of 34% b...

The use of SIPA 2 simulator for safety studies experience feedbacks and future developments

International Nuclear Information System (INIS)

Dumas, J.M.; Leteinturier, D.

1999-01-01

SIPA 2 experience feedbacks from the beginning of its use at IPSN in 1991 and trends for the next five years are presented. The simulator has been used for three applications: training of engineers working in safety analysis, preparation of national crisis drills, safety studies. In each application, experience feedbacks are analysed to show encountered advantages and difficulties. Trends for the next five years are: extension of the engineer training program (new training courses about normal operating conditions or about beyond design basis accidents), improvements in the validation of simulation configurations (in particular comparison with Cathare 2 new version results) increase of the simulation scope in connection with the SCAR project (taking into account the current power plant datapackage, the improvement of thermalhydraulic models, the extent of the system representation, new neutronic models and description of severe accident conditions). For each trend above, a detail of the planned actions is given. (author)

Cyclic Voltammetry Simulations with DigiSim Software: An Upper-Level Undergraduate Experiment

Science.gov (United States)

Messersmith, Stephania J.

2014-01-01

An upper-division undergraduate chemistry experiment is described which utilizes DigiSim software to simulate cyclic voltammetry (CV). Four mechanisms were studied: a reversible electron transfer with no subsequent or proceeding chemical reactions, a reversible electron transfer followed by a reversible chemical reaction, a reversible chemical…

Behavioral reactions to advanced cruise control: results of a driving simulator experiment

NARCIS (Netherlands)

Hoedemaeker, D.M.

2000-01-01

This chapter describes an experimental study that is conducted in the driving simulator at the Centre for Environmental and Traffic Psychology (COV) of the University of Groningen. In the experiment, two groups of drivers, who differed with respect to reported driving style in terms of speed, drove

Development of the “Approach to Critical” Experiment Simulation Model for the Consort Reactor Using LABVIEW

International Nuclear Information System (INIS)

Abbo, D. N. O.

2015-01-01

Following the shutdown of the CONSORT reactor, the “Approach to Critical” experiment which allowed students to observe and understand the procedure for taking the reactor to critical, balancing the system at low power and increasing the power over a range of powers levels and eventual reactor shutdown, would no longer be possible. It was therefore important to develop a simulation model of the experiment that would enable future students to have comparable training. An “Approach to Critical” Experiment Simulation model for the CONSORT Reactor was developed using Lab-VIEW software to simulate the “Students” experiment version. Lab– VIEW software was chosen due to its good user graphical user interface, offers ready to start functions and also the possibility of improving on the system with new algorithms. The modulation process was used to develop mathematical codes from equations using Lab–VIEW 2012 based on the CONSORT historical experimental data and known literature. The Simulation models the kinetics of a sub-critical reactor with a start-up neutron source, such that control rods are used to increase the power, then achieve power balance and finally shutting down the reactor. Reactivity changes due to temperature effects were neglected. The model was validated by testing the code through performing the three parts of the experiment; Approach to Critical, Doubling time method and Rod drop method, and results compared to the historical experimental data. The results were in agreement with historical data. However the negligible variations were obtained in the Rod drop method due to the reactivity values used to generate the code. (author)

Simulation, realization and test of veto systems for the NA62 experiment

CERN Document Server

Palladino, Vito

Search Simple Search Advanced Search Latest Additions Browse Browse by Author Browse by Subject Browse by Year Browse by Type Browse by Full text availability Info Policy About FAQ Contact us Palladino, Vito (2010) Simulation, realization and test of veto systems for the NA62 experiment. [Tesi di dottorato] (Unpublished) [img] PDF palladino_vito_23.pdf Download (55MB) | Preview Item Type: Tesi di dottorato Language: English Title: Simulation, realization and test of veto systems for the NA62 experiment Creators: Creators\tEmail Palladino, Vito\tvitopalladino@gmail.com Date: 30 November 2010 Number of Pages: 146 Institution: Università degli Studi di Napoli Federico II Department: Scienze fisiche Doctoral School: Scienze fisiche PHD name: Fisica fondamentale ed applicata PHD cycle: 23 PHD Coordinator: name\temail Marrucci, Lorenzo\tUNSPECIFIED Tutor: name\temail Ambrosino, Fabio\tUNSPECIFIED Date: 30 November 2010 Number of Pages: 146 Uncontrolled Keywords: Kaon NA62 Veto CHANTI LAV MIUR S.S.D...

Simulation and experiment on the thermal performance of U-vertical ground coupled heat exchanger

Energy Technology Data Exchange (ETDEWEB)

Li, Xinguo; Chen, Zhihao; Zhao, Jun [Department of Thermal Engineering, School of Mechanical Engineering, Tianjin University, Tianjin 300072 (China)

2006-10-15

This paper presented both the numerical simulations and experiments on the thermal performance of U-vertical ground coupled heat exchanger (UGCHE). The variation of the ground temperature and heat balance of the system were analyzed and compared in different operation modes in the numerical simulation. Experiments on the operation performance of the ground-coupled heat pump (GCHP) with the UGCHE were carried out. It shows that the ground source can be used as the heat source/sink for GCHP systems to have higher efficiency in saving energy. To preserve the ground resource for the sustainable utilization as heat source/sink, the heat emitted to ground and heat extracted from ground should be balanced. (author)

Ion-nanostructure interaction. Comparing simulation and experiment towards surface structuring using nanoparticles