A simple tool for neuroimaging data sharing

Directory of Open Access Journals (Sweden)

Christian eHaselgrove

2014-05-01

Full Text Available Data sharing is becoming increasingly common, but despite encouragement and facilitation by funding agencies, journals, and some research efforts, most neuroimaging data acquired today is still not shared due to political, financial, social, and technical barriers to sharing data that remain. In particular, technical solutions are few for researchers that are not a part of larger efforts with dedicated sharing infrastructures, and social barriers such as the time commitment required to share can keep data from becoming publicly available.We present a system for sharing neuroimaging data, designed to be simple to use and to provide benefit to the data provider. The system consists of a server at the International Neuroinformatics Coordinating Facility (INCF and user tools for uploading data to the server. The primary design principle for the user tools is ease of use: the user identifies a directory containing DICOM data, provides their INCF Portal authentication, and provides identifiers for the subject and imaging session. The user tool anonymizes the data and sends it to the server. The server then runs quality control routines on the data, and the data and the quality control reports are made public. The user retains control of the data and may change the sharing policy as they need. The result is that in a few minutes of the user’s time, DICOM data can be anonymized and made publicly available, and an initial quality control assessment can be performed on the data. The system is currently functional, and user tools and access to the public image database are available at http://xnat.incf.org/.

Use of ECG and Other Simple Non-Invasive Tools to Assess Pulmonary Hypertension.

Directory of Open Access Journals (Sweden)

Gabor Kovacs

Full Text Available There is a broad consensus that pulmonary hypertension (PH is to be diagnosed by right heart catheterization (RHC and that the most important non-invasive tool is echocardiography. However, the role of simple non-invasive tools in the work-up of PH is not clearly defined. We hypothesized that the use of simple non-invasive techniques may help to guide important decisions in the diagnostics of pulmonary hypertension.We aimed to develop an algorithm with the use of simple, non-invasive tools in order to identify patients with very high or very low likelihood of PH.We retrospectively analyzed all consecutive patients undergoing RHC between 2005 and 2010 in our center and performed logistic regression of simple non-invasive parameters regarding detection and exclusion of PH and derived a two-step algorithm. In a prospective study we evaluated this algorithm between 2011 and 2013.The retrospective cohort consisted of n = 394 patients of which 49% presented with PH. Right axis deviation in the ECG was present in 90/394 patients and had a positive predictive value (PPV of 93% for PH. The combination of non-right axis deviation, N-terminal pro brain natriuretic peptide (NT-proBNP<333pg/ml, arterial oxygen saturation (SO2≥95.5% and WHO functional class I-II was present in 69/394 patients and excluded PH with a negative predictive value (NPV of 96%. The prospective study confirmed these results in a cohort of n = 168 patients (PPV:92%, NPV:97%. Taken together, simple non-invasive tools allowed a prediction regarding the presence or absence of PH in 42% of patients with suspected PH.ECG, NT-proBNP, SO2 and WHO functional class may predict the presence or absence of PH in almost half of the patients with suspected PH, suggesting an important role for these variables in the work-up of patients at risk for PH.NCT01607502.

A Holistic Approach to Interdisciplinary Innovation Supported by a Simple Tool

DEFF Research Database (Denmark)

Denise J. Stokholm, Marianne

2008-01-01

Innovation is recognised as a strategy to achieve competitive businesses and products. Managing innovation at all levels requires integration of knowledge and interdisciplinary cooperation. Different understandings and approaches to innovation between professions often result in communication...... problems. To overcome this barrier a common ground is needed. This paper describes a holistic approach to innovation and presents a simple tool for facilitating cooperation on a diversity of innovation matters. It describes the development and use of the tool and demonstrates its capacity to support...

Simple Neuron-Fuzzy Tool for Small Control Devices

DEFF Research Database (Denmark)

Madsen, Per Printz

2008-01-01

Small control computers, running a kind of Fuzzy controller, are more and more used in many systems from household machines to large industrial systems. The purpose of this paper is firstly to describe a tool that is easy to use for implementing self learning Fuzzy systems, that can be executed...... can be described by four different kinds of membership functions. The output fuzzyfication is based on singletons. The rule base can be written in a natural language. The result of the learning is a new version of the Fuzzy system described in the FuNNy language. A simple shower control example...... is shown.  This example shows that FuNNy is able to control the shower and that the learning is able to optimize the Fuzzy system....

Knowledge management for efficient quantitative analyses during regulatory reviews.

Science.gov (United States)

Krudys, Kevin; Li, Fang; Florian, Jeffry; Tornoe, Christoffer; Chen, Ying; Bhattaram, Atul; Jadhav, Pravin; Neal, Lauren; Wang, Yaning; Gobburu, Joga; Lee, Peter I D

2011-11-01

Knowledge management comprises the strategies and methods employed to generate and leverage knowledge within an organization. This report outlines the activities within the Division of Pharmacometrics at the US FDA to effectively manage knowledge with the ultimate goal of improving drug development and advancing public health. The infrastructure required for pharmacometric knowledge management includes provisions for data standards, queryable databases, libraries of modeling tools, archiving of analysis results and reporting templates for effective communication. Two examples of knowledge management systems developed within the Division of Pharmacometrics are used to illustrate these principles. The benefits of sound knowledge management include increased productivity, allowing reviewers to focus on research questions spanning new drug applications, such as improved trial design and biomarker development. The future of knowledge management depends on the collaboration between the FDA and industry to implement data and model standards to enhance sharing and dissemination of knowledge.

Pulling My Gut out--Simple Tools for Engaging Students in Gross Anatomy Lectures

Science.gov (United States)

Chan, Lap Ki

2010-01-01

A lecture is not necessarily a monologue, promoting only passive learning. If appropriate techniques are used, a lecture can stimulate active learning too. One such method is demonstration, which can engage learners' attention and increase the interaction between the lecturer and the learners. This article describes two simple and useful tools for…

Creation of a simple natural language processing tool to support an imaging utilization quality dashboard.

Science.gov (United States)

Swartz, Jordan; Koziatek, Christian; Theobald, Jason; Smith, Silas; Iturrate, Eduardo

2017-05-01

Testing for venous thromboembolism (VTE) is associated with cost and risk to patients (e.g. radiation). To assess the appropriateness of imaging utilization at the provider level, it is important to know that provider's diagnostic yield (percentage of tests positive for the diagnostic entity of interest). However, determining diagnostic yield typically requires either time-consuming, manual review of radiology reports or the use of complex and/or proprietary natural language processing software. The objectives of this study were twofold: 1) to develop and implement a simple, user-configurable, and open-source natural language processing tool to classify radiology reports with high accuracy and 2) to use the results of the tool to design a provider-specific VTE imaging dashboard, consisting of both utilization rate and diagnostic yield. Two physicians reviewed a training set of 400 lower extremity ultrasound (UTZ) and computed tomography pulmonary angiogram (CTPA) reports to understand the language used in VTE-positive and VTE-negative reports. The insights from this review informed the arguments to the five modifiable parameters of the NLP tool. A validation set of 2,000 studies was then independently classified by the reviewers and by the tool; the classifications were compared and the performance of the tool was calculated. The tool was highly accurate in classifying the presence and absence of VTE for both the UTZ (sensitivity 95.7%; 95% CI 91.5-99.8, specificity 100%; 95% CI 100-100) and CTPA reports (sensitivity 97.1%; 95% CI 94.3-99.9, specificity 98.6%; 95% CI 97.8-99.4). The diagnostic yield was then calculated at the individual provider level and the imaging dashboard was created. We have created a novel NLP tool designed for users without a background in computer programming, which has been used to classify venous thromboembolism reports with a high degree of accuracy. The tool is open-source and available for download at http://iturrate.com/simple

Introduction, comparison, and validation of Meta‐Essentials: A free and simple tool for meta‐analysis

Science.gov (United States)

van Rhee, Henk; Hak, Tony

2017-01-01

We present a new tool for meta‐analysis, Meta‐Essentials, which is free of charge and easy to use. In this paper, we introduce the tool and compare its features to other tools for meta‐analysis. We also provide detailed information on the validation of the tool. Although free of charge and simple, Meta‐Essentials automatically calculates effect sizes from a wide range of statistics and can be used for a wide range of meta‐analysis applications, including subgroup analysis, moderator analysis, and publication bias analyses. The confidence interval of the overall effect is automatically based on the Knapp‐Hartung adjustment of the DerSimonian‐Laird estimator. However, more advanced meta‐analysis methods such as meta‐analytical structural equation modelling and meta‐regression with multiple covariates are not available. In summary, Meta‐Essentials may prove a valuable resource for meta‐analysts, including researchers, teachers, and students. PMID:28801932

Introduction, comparison, and validation of Meta-Essentials: A free and simple tool for meta-analysis.

Science.gov (United States)

Suurmond, Robert; van Rhee, Henk; Hak, Tony

2017-12-01

We present a new tool for meta-analysis, Meta-Essentials, which is free of charge and easy to use. In this paper, we introduce the tool and compare its features to other tools for meta-analysis. We also provide detailed information on the validation of the tool. Although free of charge and simple, Meta-Essentials automatically calculates effect sizes from a wide range of statistics and can be used for a wide range of meta-analysis applications, including subgroup analysis, moderator analysis, and publication bias analyses. The confidence interval of the overall effect is automatically based on the Knapp-Hartung adjustment of the DerSimonian-Laird estimator. However, more advanced meta-analysis methods such as meta-analytical structural equation modelling and meta-regression with multiple covariates are not available. In summary, Meta-Essentials may prove a valuable resource for meta-analysts, including researchers, teachers, and students. © 2017 The Authors. Research Synthesis Methods published by John Wiley & Sons Ltd.

Identifying obstructive sleep apnea after stroke/TIA: evaluating four simple screening tools.

Science.gov (United States)

Boulos, Mark I; Wan, Anthony; Im, James; Elias, Sara; Frankul, Fadi; Atalla, Mina; Black, Sandra E; Basile, Vincenzo S; Sundaram, Arun; Hopyan, Julia J; Boyle, Karl; Gladstone, David J; Murray, Brian J; Swartz, Richard H

2016-05-01

Despite its high prevalence and unfavorable clinical consequences, obstructive sleep apnea (OSA) often remains underappreciated after cerebrovascular events. The purpose of our study was to evaluate the clinical utility of four simple paper-based screening tools for excluding OSA after stroke or transient ischemic attack (TIA). Sixty-nine inpatients and outpatients with stroke or TIA during the past 180 days completed the 4-Variable screening tool (4V), STOP-BAG questionnaire (ie, STOP-BANG questionnaire without the neck circumference measurement), Berlin questionnaire, and the Sleep Obstructive apnea score optimized for Stroke (SOS). They subsequently underwent objective testing using a portable sleep monitoring device. Cutoffs were selected to maximize sensitivity and exclude OSA (AHI ≥ 10) in ≥10% of the cohort. The mean age was 68.3 ± 14.2 years and 47.8% were male. Thirty-two patients (46.4%) were found to have OSA. Male sex, body mass index (BMI), and atrial fibrillation were independent predictors of OSA. Among the screening tools, the 4V had the greatest area under the curve (AUC) of 0.688 (p = 0.007); the sensitivity was 96.9% for a cutoff of stroke/TIA. Due to the atypical presentation of poststroke/TIA OSA, these tools are only moderately predictive; objective testing should still be used for OSA diagnosis in this population. Copyright © 2016 Elsevier B.V. All rights reserved.

Reliability of a Simple Physical Therapist Screening Tool to Assess Errors during Resistance Exercises for Musculoskeletal Pain

DEFF Research Database (Denmark)

Andersen, Kenneth Jay; Sundstrup, E.; Andersen, L. L.

2014-01-01

The main objective was to investigate the intra- and intertester reliability of a simple screening tool assessing errors in exercise execution by visual observation. 38 participants with no previous resistance exercise experience practiced for two weeks four typical upper limb exercises using ela...

[Evaluation of a simple screening tool for ambulant fall prevention].

Science.gov (United States)

Knobe, M; Rasche, P; Rentemeister, L; Bliemel, C; Bücking, B; Bollheimer, L C; Pape, H-C

2018-02-02

An individual's risk of falling is generally difficult to detect and it is likely to be underestimated. Thus, preventive measures are challenging and they demand sufficient integration and implementation into aftercare and outpatient management. The Aachen Falls Prevention Scale (AFPS) is a quick and easy tool for patient-driven fall risk assessment. Older adults' risk of falling is identified in a suitable manner and they then have the opportunity to independently assess and monitor their risk of falling. The aim of the current study was to evaluate the AFPS as a simple screening tool in geriatric trauma patients via the identification of influencing factors, e.g. objective or subjective fall risk, fear of falling (FOF) and demographic data. In this context, we investigated older adults' willingness to take part in special activities concerning fall prevention. Retrospectively, all patients over 70 years of age who received in-hospital fracture treatment between July 2014 and April 2016 were analyzed at a level I trauma center. After identification of 884 patients, participants completed a short questionnaire (47 questions, yes/no, Likert scale) comprising the AFPS. A history of falls in the past year was considered an indicator of a balance disorder. In addition, ambulant patients were invited to participate between July and August 2016. In total, 201 patients (mean 80.4 years, range 63-97 years) performed a self-assessment based on the AFPS. After steps 1 and 2 of the AFPS had been completed, 95 (47%) participants rated their subjective risk of falling as high (more than 5 points). Of the participants 84 (42%) were objectively classified as "fallers" with significant effects on their AFPS evaluation and rating of their subjective risk of falling. Furthermore, 67% of the participants identified a general practitioner as their main contact person, and 43% of the respondents viewed the AFPS as a beneficial screening tool in fall risk evaluation (8

The Simple Video Coder: A free tool for efficiently coding social video data.

Science.gov (United States)

Barto, Daniel; Bird, Clark W; Hamilton, Derek A; Fink, Brandi C

2017-08-01

Videotaping of experimental sessions is a common practice across many disciplines of psychology, ranging from clinical therapy, to developmental science, to animal research. Audio-visual data are a rich source of information that can be easily recorded; however, analysis of the recordings presents a major obstacle to project completion. Coding behavior is time-consuming and often requires ad-hoc training of a student coder. In addition, existing software is either prohibitively expensive or cumbersome, which leaves researchers with inadequate tools to quickly process video data. We offer the Simple Video Coder-free, open-source software for behavior coding that is flexible in accommodating different experimental designs, is intuitive for students to use, and produces outcome measures of event timing, frequency, and duration. Finally, the software also offers extraction tools to splice video into coded segments suitable for training future human coders or for use as input for pattern classification algorithms.

Creating Simple Windchill Admin Tools Using Info*Engine

Science.gov (United States)

Jones, Corey; Kapatos, Dennis; Skradski, Cory

2012-01-01

Being a Windchill administrator often requires performing simple yet repetitive tasks on large sets of objects. These can include renaming, deleting, checking in, undoing checkout, and much more. This is especially true during a migration. Fortunately, PTC has provided a simple way to dynamically interact with Windchill using Info*Engine. This presentation will describe how to create simple Info*Engine tasks capable of saving Windchill 10.0 administrators hours of tedious work. It will also show how these tasks can be combined and displayed on a simple JSP page that acts as a "Windchill Administrator Dashboard/Toolbox". The attendee will learn some valuable tasks Info*Engine capable of performing. The attendee will gain a basic understanding of how to perform and implement Info*Engine tasks. The attendee will learn what's involved in creating a JSP page that displays Info*Engine tasks

Fast and simple tool for the quantification of biofilm-embedded cells sub-populations from fluorescent microscopic images.

Directory of Open Access Journals (Sweden)

Mikhail I Bogachev

Full Text Available Fluorescent staining is a common tool for both quantitative and qualitative assessment of pro- and eukaryotic cells sub-population fractions by using microscopy and flow cytometry. However, direct cell counting by flow cytometry is often limited, for example when working with cells rigidly adhered either to each other or to external surfaces like bacterial biofilms or adherent cell lines and tissue samples. An alternative approach is provided by using fluorescent microscopy and confocal laser scanning microscopy (CLSM, which enables the evaluation of fractions of cells subpopulations in a given sample. For the quantitative assessment of cell fractions in microphotographs, we suggest a simple two-step algorithm that combines single cells selection and the statistical analysis. To facilitate the first step, we suggest a simple procedure that supports finding the balance between the detection threshold and the typical size of single cells based on objective cell size distribution analysis. Based on a series of experimental measurements performed on bacterial and eukaryotic cells under various conditions, we show explicitly that the suggested approach effectively accounts for the fractions of different cell sub-populations (like the live/dead staining in our samples in all studied cases that are in good agreement with manual cell counting on microphotographs and flow cytometry data. This algorithm is implemented as a simple software tool that includes an intuitive and user-friendly graphical interface for the initial adjustment of algorithm parameters to the microphotographs analysis as well as for the sequential analysis of homogeneous series of similar microscopic images without further user intervention. The software tool entitled BioFilmAnalyzer is freely available online at https://bitbucket.org/rogex/biofilmanalyzer/downloads/.

Stratifying Risk of Falls in Community-Dwelling Elderly Adults Through a Simple Tool

Directory of Open Access Journals (Sweden)

Schettino Ludmila

2016-12-01

Full Text Available Purpose. Falls are among the main disabling events for elderly adults and the identification of old people prone to falls enables the development of preventive and rehabilitative strategies. This study aimed to develop a simple tool, based on easily obtained variables (anthropometric measurements, motor performance tests and sociodemographic characteristics, to early identify community-dwelling old people prone to falls. Methods. The population-based household study was conducted among 316 elders (≥ 60 years old of both sexes, living in the urban area of Lafaiete Coutinho in Brazil. History of falls in the previous 12 months (dependent variable, sociodemographic characteristics, anthropometric measurements and motor performance tests results (explanatory variables were recorded, and a multivariate logistic regression was applied to identify the association between the explanatory variables and the history of falls. Fall probability for each elderly adult was calculated from the logistic regression parameters, and the predictive power of the final model and the cutoff for higher propensity to fall were evaluated on the basis of the receiver operating characteristic curve. Results. The prevalence of falls was 25.8% and the final model was influenced by the variables of sex (female and poor performance in the balance test. The estimated probability model predicted approximately 66.5% (95% CI, 61-72% of the falls. The sensitivity and specificity were 58 and 70%, respectively. Conclusions. We conclude that there is a high prevalence of falls among the studied elderly individuals, and the proposed method allowed to construct a simple tool for screening old adults prone to fall.

Complex Coronary Hemodynamics - Simple Analog Modelling as an Educational Tool.

Science.gov (United States)

Parikh, Gaurav R; Peter, Elvis; Kakouros, Nikolaos

2017-01-01

Invasive coronary angiography remains the cornerstone for evaluation of coronary stenoses despite there being a poor correlation between luminal loss assessment by coronary luminography and myocardial ischemia. This is especially true for coronary lesions deemed moderate by visual assessment. Coronary pressure-derived fractional flow reserve (FFR) has emerged as the gold standard for the evaluation of hemodynamic significance of coronary artery stenosis, which is cost effective and leads to improved patient outcomes. There are, however, several limitations to the use of FFR including the evaluation of serial stenoses. In this article, we discuss the electronic-hydraulic analogy and the utility of simple electrical modelling to mimic the coronary circulation and coronary stenoses. We exemplify the effect of tandem coronary lesions on the FFR by modelling of a patient with sequential disease segments and complex anatomy. We believe that such computational modelling can serve as a powerful educational tool to help clinicians better understand the complexity of coronary hemodynamics and improve patient care.

Creating Simple Admin Tools Using Info*Engine and Java

Science.gov (United States)

Jones, Corey; Kapatos, Dennis; Skradski, Cory; Felkins, J. D.

2012-01-01

PTC has provided a simple way to dynamically interact with Windchill using Info*Engine. This presentation will describe how to create a simple Info*Engine Tasks capable of saving Windchill 10.0 administration of tedious work.

"Chair Stand Test" as Simple Tool for Sarcopenia Screening in Elderly Women.

Science.gov (United States)

Pinheiro, P A; Carneiro, J A O; Coqueiro, R S; Pereira, R; Fernandes, M H

2016-01-01

To investigate the association between sarcopenia and "chair stand test" performance, and evaluate this test as a screening tool for sarcopenia in community-dwelling elderly women. Cross-sectional Survey. 173 female individuals, aged ≥ 60 years and living in the urban area of the municipality of Lafaiete Coutinho, Bahia's inland, Brazil. The association between sarcopenia (defined by muscle mass, strength and/or performance loss) and performance in the "chair stand test" was tested by binary logistic regression technique. The ROC curve parameters were used to evaluate the diagnostic power of the test in sarcopenia screening. The significance level was set at 5 %. The model showed that the time spent for the "chair stand test" was positively associated (OR = 1.08; 95% CI = 1.01 - 1.16, p = 0.024) to sarcopenia, indicating that, for each 1 second increment in the test performance, the sarcopenia's probability increased by 8% in elderly women. The cut-off point that showed the best balance between sensitivity and specificity was 13 seconds. The performance of "chair stand test" showed predictive ability for sarcopenia, being an effective and simple screening tool for sarcopenia in elderly women. This test could be used for screening sarcopenic elderly women, allowing early interventions.

Novel simple and practical nutritional screening tool for cancer inpatients: a pilot study.

Science.gov (United States)

Zekri, Jamal; Morganti, Julie; Rizvi, Azhar; Sadiq, Bakr Bin; Kerr, Ian; Aslam, Mohamed

2014-05-01

There is lack of consensus on how nutritional screening and intervention should be provided to cancer patients. Nutritional screening and support of cancer patients are not well established in the Middle East. We report our systematic and practical experience led by a qualified specialist dietician in a cancer inpatient setting, using a novel nutritional screening tool. Ninety-seven consecutive inpatients underwent nutritional screening and categorised into three nutritional risk groups based on oral intake, gastrointestinal symptoms, body mass index (BMI) and weight loss. Nutritional support was introduced accordingly. Statistical tests used included ANOVA, Bonferroni post hoc, chi-square and log rank tests. Median age was 48 (19-87)years. Patients were categorised into three nutritional risk groups: 55 % low, 37 % intermediate and 8 % high. Nutritional intervention was introduced for 36 % of these patients. Individually, weight, BMI, oral intake, serum albumin on admission and weight loss significantly affected nutritional risk and nutritional intervention (all significant P values). Eighty-seven, 60 and 55 % of patients admitted for chemotherapy, febrile neutropenia and other reasons, respectively, did not require specific nutritional intervention. There was a statistically significant relationship between nutritional risk and nutritional intervention (P=0.005). Significantly more patients were alive at 3 months in low (91 %) than intermediate (75 %) than high (37 %)-risk groups. About a third of cancer inpatients require nutritional intervention. The adopted nutritional risk assessment tool is simple and practical. The validity of this tool is supported by its significant relation with known individual nutritional risk factors. This should be confirmed in larger prospective study and comparing this new tool with other established ones.

Dashboard systems: implementing pharmacometrics from bench to bedside.

Science.gov (United States)

Mould, Diane R; Upton, Richard N; Wojciechowski, Jessica

2014-09-01

In recent years, there has been increasing interest in the development of medical decision-support tools, including dashboard systems. Dashboard systems are software packages that integrate information and calculations about therapeutics from multiple components into a single interface for use in the clinical environment. Given the high cost of medical care, and the increasing need to demonstrate positive clinical outcomes for reimbursement, dashboard systems may become an important tool for improving patient outcome, improving clinical efficiency and containing healthcare costs. Similarly the costs associated with drug development are also rising. The use of model-based drug development (MBDD) has been proposed as a tool to streamline this process, facilitating the selection of appropriate doses and making informed go/no-go decisions. However, complete implementation of MBDD has not always been successful owing to a variety of factors, including the resources required to provide timely modeling and simulation updates. The application of dashboard systems in drug development reduces the resource requirement and may expedite updating models as new data are collected, allowing modeling results to be available in a timely fashion. In this paper, we present some background information on dashboard systems and propose the use of these systems both in the clinic and during drug development.

Simple X-ray versus ultrasonography examination in blunt chest trauma: effective tools of accurate diagnosis and considerations for rib fractures

OpenAIRE

Hwang, Eun Gu; Lee, Yunjung

2016-01-01

Simple radiography is the best diagnostic tool for rib fractures caused by chest trauma, but it has some limitations. Thus, other tools are also being used. The aims of this study were to investigate the effectiveness of ultrasonography (US) for identifying rib fractures and to identify influencing factors of its effectiveness. Between October 2003 and August 2007, 201 patients with blunt chest trauma were available to undergo chest radiographic and US examinations for diagnosis of rib fractu...

A simple quality assurance test tool for the visual verification of light and radiation field congruent using electronic portal images device and computed radiography

International Nuclear Information System (INIS)

Njeh, Christopher F; Caroprese, Blas; Desai, Pushkar

2012-01-01

The radiation field on most megavoltage radiation therapy units are shown by a light field projected through the collimator by a light source mounted inside the collimator. The light field is traditionally used for patient alignment. Hence it is imperative that the light field is congruent with the radiation field. A simple quality assurance tool has been designed for rapid and simple test of the light field and radiation field using electronic portal images device (EPID) or computed radiography (CR). We tested this QA tool using Varian PortalVision and Elekta iViewGT EPID systems and Kodak CR system. Both the single and double exposure techniques were evaluated, with double exposure technique providing a better visualization of the light-radiation field markers. The light and radiation congruency could be detected within 1 mm. This will satisfy the American Association of Physicists in Medicine task group report number 142 recommendation of 2 mm tolerance. The QA tool can be used with either an EPID or CR to provide a simple and rapid method to verify light and radiation field congruence

Simple frequency-dependent tools for analysis of inherent control limitations

Directory of Open Access Journals (Sweden)

Sigurd Skogestad

1991-10-01

Full Text Available By a plant's inherent control limitations we mean the characteristics of the plant which will cause poor control performance irrespective of what controller is used. Another frequently used term is 'dynamic resilience' which is the best closed-loop performance achievable using any controller. Since a plant's dynamic resilience cannot be altered by change of the control algorithm, but only by design modifications, it follows that the term controllability provides a link between process design and process control. In this paper we focus on two aspects of controllability. The plants' sensitivity to disturbances and the limitations imposed by interactions when using decentralized control. We use simple tools such as the RGA, the PRGA (Performance RGA and the closely related Closed Loop Disturbance Gain (CLDG. For example, if kth column of the CLDG is large, then this indicates that disturbance k will be difficult to reject. This may pinpoint the need for modifying the process. The PRGA provides a measure of interaction which also includes one-way coupling. In the paper we apply these measures to distillation column control and fluid catalytic cracker (FCC control.

An approach to derive some simple empirical equations to calibrate nuclear and acoustic well logging tools.

Science.gov (United States)

Mohammad Al Alfy, Ibrahim

2018-01-01

A set of three pads was constructed from primary materials (sand, gravel and cement) to calibrate the gamma-gamma density tool. A simple equation was devised to convert the qualitative cps values to quantitative g/cc values. The neutron-neutron porosity tool measures the qualitative cps porosity values. A direct equation was derived to calculate the porosity percentage from the cps porosity values. Cement-bond log illustrates the cement quantities, which surround well pipes. This log needs a difficult process due to the existence of various parameters, such as: drilling well diameter as well as internal diameter, thickness and type of well pipes. An equation was invented to calculate the cement percentage at standard conditions. This equation can be modified according to varying conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

A simple teaching tool for training the pelvic organ prolapse quantification system.

Science.gov (United States)

Geiss, Ingrid M; Riss, Paul A; Hanzal, Engelbert; Dungl, Andrea

2007-09-01

The pelvic organ prolapse quantification (POPQ) system is currently the most common and specific system describing different prolapse stages. Nevertheless, its use is not yet accepted worldwide in routine care. Our aim was to develop a simple teaching tool for the POPQ system capable of simulating different stages of uterovaginal prolapse for use in medical education with hands on training. We constructed a moveable and flexible tool with an inverted Santa Claus' cap, which simulated the vaginal cuff and the tassel at the end representing the cervix. A wooden embroidery frame fixed the cap and served as the hymen, the reference point for all measurements. Inside the cap, we sewed buttons to define the anatomic landmark points Aa and Ap located 3 cm distal from the frame. After explaining the device to the students, we used the three-by-three grid for recording the quantitative description of the pelvic organ support. First, each student had to demonstrate a specific prolapse with his cap device. Then, a prolapse was simulated on the cap, and the student had to take the relevant measurements and record them in the POPQ grid. The main training effect to understand the POPQ system seems to be the possibility for each trainee to simulate a three-dimensional prolapse with this flexible vagina model.

A simple quality assurance test tool for the visual verification of light and radiation field congruent using electronic portal images device and computed radiography

Directory of Open Access Journals (Sweden)

Njeh Christopher F

2012-03-01

Full Text Available Abstract Background The radiation field on most megavoltage radiation therapy units are shown by a light field projected through the collimator by a light source mounted inside the collimator. The light field is traditionally used for patient alignment. Hence it is imperative that the light field is congruent with the radiation field. Method A simple quality assurance tool has been designed for rapid and simple test of the light field and radiation field using electronic portal images device (EPID or computed radiography (CR. We tested this QA tool using Varian PortalVision and Elekta iViewGT EPID systems and Kodak CR system. Results Both the single and double exposure techniques were evaluated, with double exposure technique providing a better visualization of the light-radiation field markers. The light and radiation congruency could be detected within 1 mm. This will satisfy the American Association of Physicists in Medicine task group report number 142 recommendation of 2 mm tolerance. Conclusion The QA tool can be used with either an EPID or CR to provide a simple and rapid method to verify light and radiation field congruence.

ELM - A SIMPLE TOOL FOR THERMAL-HYDRAULIC ANALYSIS OF SOLID-CORE NUCLEAR ROCKET FUEL ELEMENTS

Science.gov (United States)

Walton, J. T.

1994-01-01

ELM is a simple computational tool for modeling the steady-state thermal-hydraulics of propellant flow through fuel element coolant channels in nuclear thermal rockets. Written for the nuclear propulsion project of the Space Exploration Initiative, ELM evaluates the various heat transfer coefficient and friction factor correlations available for turbulent pipe flow with heat addition. In the past, these correlations were found in different reactor analysis codes, but now comparisons are possible within one program. The logic of ELM is based on the one-dimensional conservation of energy in combination with Newton's Law of Cooling to determine the bulk flow temperature and the wall temperature across a control volume. Since the control volume is an incremental length of tube, the corresponding pressure drop is determined by application of the Law of Conservation of Momentum. The size, speed, and accuracy of ELM make it a simple tool for use in fuel element parametric studies. ELM is a machine independent program written in FORTRAN 77. It has been successfully compiled on an IBM PC compatible running MS-DOS using Lahey FORTRAN 77, a DEC VAX series computer running VMS, and a Sun4 series computer running SunOS UNIX. ELM requires 565K of RAM under SunOS 4.1, 360K of RAM under VMS 5.4, and 406K of RAM under MS-DOS. Because this program is machine independent, no executable is provided on the distribution media. The standard distribution medium for ELM is one 5.25 inch 360K MS-DOS format diskette. ELM was developed in 1991. DEC, VAX, and VMS are trademarks of Digital Equipment Corporation. Sun4 and SunOS are trademarks of Sun Microsystems, Inc. IBM PC is a registered trademark of International Business Machines. MS-DOS is a registered trademark of Microsoft Corporation.

A simple tool for tubing modification to improve spiral high-speed counter-current chromatography for protein purification.

Science.gov (United States)

Ito, Yoichiro; Ma, Xiaofeng; Clary, Robert

2016-01-01

A simple tool is introduced which can modify the shape of tubing to enhance the partition efficiency in high-speed countercurrent chromatography. It consists of a pair of interlocking identical gears, each coaxially holding a pressing wheel to intermittently compress plastic tubing in 0 - 10 mm length at every 1 cm interval. The performance of the processed tubing is examined in protein separation with 1.6 mm ID PTFE tubing intermittently pressed in 3 mm and 10 mm width both at 10 mm intervals at various flow rates and revolution speeds. A series of experiments was performed with a polymer phase system composed of polyethylene glycol and dibasic potassium phosphate each at 12.5% (w/w) in deionized water using three protein samples. Overall results clearly demonstrate that the compressed tubing can yield substantially higher peak resolution than the non-processed tubing. The simple tubing modifier is very useful for separation of proteins with high-speed countercurrent chromatography.

BRED: a simple and powerful tool for constructing mutant and recombinant bacteriophage genomes.

Directory of Open Access Journals (Sweden)

Laura J Marinelli

Full Text Available Advances in DNA sequencing technology have facilitated the determination of hundreds of complete genome sequences both for bacteria and their bacteriophages. Some of these bacteria have well-developed and facile genetic systems for constructing mutants to determine gene function, and recombineering is a particularly effective tool. However, generally applicable methods for constructing defined mutants of bacteriophages are poorly developed, in part because of the inability to use selectable markers such as drug resistance genes during viral lytic growth. Here we describe a method for simple and effective directed mutagenesis of bacteriophage genomes using Bacteriophage Recombineering of Electroporated DNA (BRED, in which a highly efficient recombineering system is utilized directly on electroporated phage DNA; no selection is required and mutants can be readily detected by PCR. We describe the use of BRED to construct unmarked gene deletions, in-frame internal deletions, base substitutions, precise gene replacements, and the addition of gene tags.

Simple and Realistic Data Generation

DEFF Research Database (Denmark)

Pedersen, Kenneth Houkjær; Torp, Kristian; Wind, Rico

2006-01-01

This paper presents a generic, DBMS independent, and highly extensible relational data generation tool. The tool can efficiently generate realistic test data for OLTP, OLAP, and data streaming applications. The tool uses a graph model to direct the data generation. This model makes it very simple...... to generate data even for large database schemas with complex inter- and intra table relationships. The model also makes it possible to generate data with very accurate characteristics....

Development of a screening tool for detecting undernutrition and dietary inadequacy among rural elderly in Malaysia: simple indices to identify individuals at high risk.

Science.gov (United States)

Shahar, S; Dixon, R A; Earland, J

1999-11-01

Undernutrition and the consumption of poor diets are prevalent among elderly people in developing countries. Recognising the importance of the early identification of individuals at high nutritional risk, this study aimed to develop a simple tool for screening. A cross-sectional study was conducted on 11 randomly selected villages among the 62 in Mersing District, Malaysia. Undernutrition was assessed using body mass index, plasma albumin and haemoglobin on 285 subjects. Dietary inadequacy (a count of nutrients falling below two-thirds of the Recommended Dietary Allowances) was examined for 337 subjects. Logistic regression analysis was performed to identify significant predictors of undernutrition and dietary inadequacy from social and health factors, and to derive appropriate indices based on these predictions. The multivariate predictors of undernutrition were 'no joint disease', 'smoker', 'no hypertension', 'depended on others for economic resource', 'respiratory disease', 'perceived weight loss' and 'chewing difficulty', with a joint sensitivity of 56% and specificity of 84%. The equivalent predictors of dietary inadequacy were 'unable to take public transport', 'loss of appetite', 'chewing difficulty', 'no regular fruit intake' and 'regularly taking less than three meals per day', with a joint sensitivity of 77% and specificity of 47%. These predictions, with minor modification to simplify operational use, led to the production of a simple screening tool. The tool can be used by public health professionals or community workers or leaders as a simple and rapid instrument to screen individual at high risk of undernutrition and/or dietary inadequacy.

Quality Control System using Simple Implementation of Seven Tools for Batik Textile Manufacturing

Science.gov (United States)

Ragil Suryoputro, Muhammad; Sugarindra, Muchamad; Erfaisalsyah, Hendy

2017-06-01

In order to produce better products and mitigate defect in products, every company must implement a quality control system. Company will find means to implement a quality control system that is capable and reliable. One of the methods is using the simple implementation of the seven tools in quality control defects. The case studied in this research was the level of disability xyz grey fabric on a shuttle loom 2 on the Batik manufacturing company. The seven tools that include: flowchart, check sheet, histogram, scatter diagram combined with control charts, Pareto diagrams and fishbone diagrams (causal diagram). Check sheet results obtained types of defects in the grey fabric was woven xyz is warp, double warp, the warp break, double warp, empty warp, warp tenuous, ugly edges, thick warp, and rust. Based on the analysis of control chart indicates that the process is out of control. This can be seen in the graph control where there is still a lot of outlier data. Based on a scatter diagram shows a positive correlation between the percentage of disability and the number of production. Based on Pareto diagram, repair needs priority is for the dominant type of defect is warp (44%) and based on double warp value histogram is also the highest with a value of 23635.11 m. In addition, based on the analysis of the factors causing defect by fishbone diagram double warp or other types of defects originating from the materials, methods, machines, measurements, man and environment. Thus the company can take to minimize the prevention and repair of defects and improve product quality.

Semer: a simple calculational tool for the economic evaluations of reactor systems and associated innovations

International Nuclear Information System (INIS)

Nisan, S.; Rouyer, J.L.

2001-01-01

This paper summarises part of our on-going investigations on the economic evaluations of various nuclear and fossil energy systems and related innovations. These investigations are principally concerned with the development of the code system SEMER and its validation. SEMER has been developed to furnish top management and project leaders a simple tool for cost evaluations enabling a choice between competitive technological options. The cost evaluation models, actually integrated in the SEMER system, already cover a very wide range of electricity producing systems and, where relevant, their associated fuel cycles: The ''global models'', allowing rapid but relatively approximate overall cost estimations (about 15 % error). These include: Almost all the electricity producing systems using fossil energies (Oil, Coal, Gas, including gas turbines with combined cycles); Nuclear reactor systems including all the French PWRs, HTRs, Compact PWRs, and PWRs for nuclear propulsion systems. (author)

Simple clamped connection for bamboo truss systems

NARCIS (Netherlands)

Blok, R.

2016-01-01

“How to make fast and simple tension connections for truss systems?” The Solution: The innovation is a connection that uses only widely available base components (boltsand threaded steel bars) and simple hand tools to install it. With a handsaw and aspanner, the bamboo stems can be combined into to

Simple X-ray versus ultrasonography examination in blunt chest trauma: effective tools of accurate diagnosis and considerations for rib fractures.

Science.gov (United States)

Hwang, Eun Gu; Lee, Yunjung

2016-12-01

Simple radiography is the best diagnostic tool for rib fractures caused by chest trauma, but it has some limitations. Thus, other tools are also being used. The aims of this study were to investigate the effectiveness of ultrasonography (US) for identifying rib fractures and to identify influencing factors of its effectiveness. Between October 2003 and August 2007, 201 patients with blunt chest trauma were available to undergo chest radiographic and US examinations for diagnosis of rib fractures. The two modalities were compared in terms of effectiveness based on simple radiographic readings and US examination results. We also investigated the factors that influenced the effectiveness of US examination. Rib fractures were detected on radiography in 69 patients (34.3%) but not in 132 patients. Rib fractures were diagnosed by using US examination in 160 patients (84.6%). Of the 132 patients who showed no rib fractures on radiography, 92 showed rib fractures on US. Among the 69 patients of rib fracture detected on radiography, 33 had additional rib fractures detected on US. Of the patients, 76 (37.8%) had identical radiographic and US results, and 125 (62.2%) had fractures detected on US that were previously undetected on radiography or additional fractures detected on US. Age, duration until US examination, and fracture location were not significant influencing factors. However, in the group without detected fractures on radiography, US showed a more significant effectiveness than in the group with detected fractures on radiography ( P =0.003). US examination could detect unnoticed rib fractures on simple radiography. US examination is especially more effective in the group without detected fractures on radiography. More attention should be paid to patients with chest trauma who have no detected fractures on radiography.

Simple sorting algorithm test based on CUDA

OpenAIRE

Meng, Hongyu; Guo, Fangjin

2015-01-01

With the development of computing technology, CUDA has become a very important tool. In computer programming, sorting algorithm is widely used. There are many simple sorting algorithms such as enumeration sort, bubble sort and merge sort. In this paper, we test some simple sorting algorithm based on CUDA and draw some useful conclusions.

Semer: a simple calculational tool for the economic evaluations of reactor systems and associated innovations

Energy Technology Data Exchange (ETDEWEB)

Nisan, S. [CEA Cadarache, Nuclear Reactor Directorate, DRN, Dept. of Reactor Studies, DER, Reactor and Innovative Systems Service, SERSI, 13 - Saint Paul lez Durance (France); Rouyer, J.L. [Electricite de France (EDF), Pole Industrie, Div. Ingenierie et Services, 93 - Saint-Denis (France)

2001-07-01

This paper summarises part of our on-going investigations on the economic evaluations of various nuclear and fossil energy systems and related innovations. These investigations are principally concerned with the development of the code system SEMER and its validation. SEMER has been developed to furnish top management and project leaders a simple tool for cost evaluations enabling a choice between competitive technological options. The cost evaluation models, actually integrated in the SEMER system, already cover a very wide range of electricity producing systems and, where relevant, their associated fuel cycles: The ''global models'', allowing rapid but relatively approximate overall cost estimations (about 15 % error). These include: Almost all the electricity producing systems using fossil energies (Oil, Coal, Gas, including gas turbines with combined cycles); Nuclear reactor systems including all the French PWRs, HTRs, Compact PWRs, and PWRs for nuclear propulsion systems. (author)

IEA SHC Task 42/ECES Annex 29 – A Simple Tool for the Economic Evaluation of Thermal Energy Storages

DEFF Research Database (Denmark)

Rathgeber, Christoph; Hiebler, Stefan; Lävemann, Eberhard

2016-01-01

Within the framework of IEA SHC Task 42 / ECES Annex 29, a simple tool for the economic evaluation of thermal energy storages has been developed and tested on various existing storages. On that account, the storage capacity costs (costs per installed storage capacity) of thermal energy storages...... have been evaluated via a Top-down and a Bottom-up approach. The Top-down approach follows the assumption that the costs of energy supplied by the storage should not exceed the costs of energy from the market. The maximum acceptable storage capacity costs depend on the interest rate assigned...

Open innovation: Towards sharing of data, models and workflows.

Science.gov (United States)

Conrado, Daniela J; Karlsson, Mats O; Romero, Klaus; Sarr, Céline; Wilkins, Justin J

2017-11-15

Sharing of resources across organisations to support open innovation is an old idea, but which is being taken up by the scientific community at increasing speed, concerning public sharing in particular. The ability to address new questions or provide more precise answers to old questions through merged information is among the attractive features of sharing. Increased efficiency through reuse, and increased reliability of scientific findings through enhanced transparency, are expected outcomes from sharing. In the field of pharmacometrics, efforts to publicly share data, models and workflow have recently started. Sharing of individual-level longitudinal data for modelling requires solving legal, ethical and proprietary issues similar to many other fields, but there are also pharmacometric-specific aspects regarding data formats, exchange standards, and database properties. Several organisations (CDISC, C-Path, IMI, ISoP) are working to solve these issues and propose standards. There are also a number of initiatives aimed at collecting disease-specific databases - Alzheimer's Disease (ADNI, CAMD), malaria (WWARN), oncology (PDS), Parkinson's Disease (PPMI), tuberculosis (CPTR, TB-PACTS, ReSeqTB) - suitable for drug-disease modelling. Organized sharing of pharmacometric executable model code and associated information has in the past been sparse, but a model repository (DDMoRe Model Repository) intended for the purpose has recently been launched. In addition several other services can facilitate model sharing more generally. Pharmacometric workflows have matured over the last decades and initiatives to more fully capture those applied to analyses are ongoing. In order to maximize both the impact of pharmacometrics and the knowledge extracted from clinical data, the scientific community needs to take ownership of and create opportunities for open innovation. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of a Simple Tool for Identifying Alcohol Use Disorder in Female Korean Drinkers from Previous Questionnaires.

Science.gov (United States)

Seo, Yu Ri; Kim, Jong Sung; Kim, Sung Soo; Yoon, Seok Joon; Suh, Won Yoon; Youn, Kwangmi

2016-01-01

This study aimed to develop a simple tool for identifying alcohol use disorders in female Korean drinkers from previous questionnaires. This research was conducted on 400 women who consumed at least one alcoholic drink during the past month and visited the health promotion center at Chungnam National University Hospital between June 2013 to May 2014. Drinking habits and alcohol use disorders were assessed by structured interviews using the Diagnostic and Statistical Manual of Mental Disorders, 5th Edition diagnostic criteria. The subjects were also asked to answer the Alcohol Use Disorders Identification Test (AUDIT), AUDIT-Consumption, CAGE (Cut down, Annoyed, Guilty, Eye-opener), TWEAK (Tolerance, Worried, Eye-opener, Amnesia, Kut down), TACE (Tolerance, Annoyed, Cut down, Eye-opener), and NET (Normal drinker, Eye-opener, Tolerance) questionnaires. The area under receiver operating characteristic (AUROC) of each question of the questionnaires on alcohol use disorders was assessed. After combining two questions with the largest AUROC, it was compared to other previous questionnaires. Among the 400 subjects, 58 (14.5%) were identified as having an alcohol use disorder. Two questions with the largest AUROC were question no. 7 in AUDIT, "How often during the last year have you had a feeling of guilt or remorse after drinking?" and question no. 5 in AUDIT, "How often during the past year have you failed to do what was normally expected from you because of drinking?" with an AUROC (95% confidence interval [CI]) of 0.886 (0.850-0.915) and 0.862 (0.824-0.894), respectively. The AUROC (95% CI) of the combination of the two questions was 0.958 (0.934-0.976) with no significant difference as compared to the existing AUDIT with the largest AUROC. The above results suggest that the simple tool consisting of questions no. 5 and no. 7 in AUDIT is useful in identifying alcohol use disorders in Korean female drinkers.

Magnetic particle separation technique: a reliable and simple tool for RIA/IRMA and quantitative PCR assay

International Nuclear Information System (INIS)

Shen Rongsen; Shen Decun

1998-01-01

Five types of magnetic particles without or with aldehyde, amino and carboxyl functional groups, respectively were used to immobilize first or second antibody by three models, i. e. physical adsorption, chemical coupling and immuno-affinity, forming four types of magnetic particle antibodies. The second antibody immobilized on polyacrolein magnetic particles through aldehyde functional groups and the first antibodies immobilized on carboxylic polystyrene magnetic particles through carboxyl functional groups were recommended to apply to RIAs and/or IRMAs. Streptavidin immobilized on commercial magnetic particles through amino functional groups was successfully applied to separating specific PCR product for quantification of human cytomegalovirus. In the paper typical data on reliability of these magnetic particle ligands were reported and simplicity of the magnetic particle separation technique was discussed. The results showed that the technique was a reliable and simple tool for RIA/IRMA and quantitative PCR assay. (author)

Simple decision tools to help optimize the control strategy 2 weeks into a Danish FMD epidemic

DEFF Research Database (Denmark)

Willeberg, Preben; Hisham Beshara Halasa, Tariq; Boklund, Anette

2012-01-01

The choice of whether or not to apply emergency vaccination is one of the most difficult decisions facing the authorities when foot-and-mouth disease (FMD) breaks out in a free country (Barnett et al. 2002). A simple quantitative tool has been proposed using the first 14-days incidence (FFI...... detected after day 14, the epidemic duration after day 14 and the size of the affected region at the end of the epidemic. Statistically significant positive correlations were found in all regression analyses of the data. There was, however, a high degree of variation (Fig. 1), which is to be expected...... to estimate predictive values by applying selected cut-off- values for both the dependent and the independent variables (Table 1). Emergency vaccination should be considered during an outbreak if the predicted cumulative size, duration or cost of the epidemic appears alarming (EU 2003, Kitching et al. 2005...

Simple Strategic Analysis Tools at SMEs in Ecuador

Directory of Open Access Journals (Sweden)

Diego H. Álvarez Peralta

2015-06-01

Full Text Available This article explores the possible applications of Strategic Analysis Tools (SAT in SMEs located in emerging countries such as Ecuador (where there are no formal studies on the subject. It is intended to analyze if whether or not it is feasible to effectively apply a set of proposed tools to guide mental map decisions of executives when decisions on strategy have to be made. Through an in-depth review of the state of the art in regards to SAT and interviews performed to main participants such as chambers and executives of different firms, it is shown the feasibility of their application. This analysis is complemented with specialists´ interviews to deepen our insights and obtaining valid conclusions. Our conclusion is that SMEs can smoothly develop and apply an appropriate set of SAT when opting for very relevant choices. However, there are some inconveniences to be solved which are connected with resources (such as peoples’ abilities and technology and behavioral (cultural factors and methodological processes.Once these barriers are knocked down, it would be more likely to enrich current approaches to make strategic decisions even more effective. This is a qualitative investigation and the research design is not experimental (among them it is transversal as it relates to a specific moment in time.

Simple Tools to Facilitate Project Management of a Nursing Research Project.

Science.gov (United States)

Aycock, Dawn M; Clark, Patricia C; Thomas-Seaton, LaTeshia; Lee, Shih-Yu; Moloney, Margaret

2016-07-01

Highly organized project management facilitates rigorous study implementation. Research involves gathering large amounts of information that can be overwhelming when organizational strategies are not used. We describe a variety of project management and organizational tools used in different studies that may be particularly useful for novice researchers. The studies were a multisite study of caregivers of stroke survivors, an Internet-based diary study of women with migraines, and a pilot study testing a sleep intervention in mothers of low-birth-weight infants. Project management tools were used to facilitate enrollment, data collection, and access to results. The tools included protocol and eligibility checklists, event calendars, screening and enrollment logs, instrument scoring tables, and data summary sheets. These tools created efficiency, promoted a positive image, minimized errors, and provided researchers with a sense of control. For the studies described, there were no protocol violations, there were minimal missing data, and the integrity of data collection was maintained. © The Author(s) 2016.

A computer tool for a minimax criterion in binary response and heteroscedastic simple linear regression models.

Science.gov (United States)

Casero-Alonso, V; López-Fidalgo, J; Torsney, B

2017-01-01

Binary response models are used in many real applications. For these models the Fisher information matrix (FIM) is proportional to the FIM of a weighted simple linear regression model. The same is also true when the weight function has a finite integral. Thus, optimal designs for one binary model are also optimal for the corresponding weighted linear regression model. The main objective of this paper is to provide a tool for the construction of MV-optimal designs, minimizing the maximum of the variances of the estimates, for a general design space. MV-optimality is a potentially difficult criterion because of its nondifferentiability at equal variance designs. A methodology for obtaining MV-optimal designs where the design space is a compact interval [a, b] will be given for several standard weight functions. The methodology will allow us to build a user-friendly computer tool based on Mathematica to compute MV-optimal designs. Some illustrative examples will show a representation of MV-optimal designs in the Euclidean plane, taking a and b as the axes. The applet will be explained using two relevant models. In the first one the case of a weighted linear regression model is considered, where the weight function is directly chosen from a typical family. In the second example a binary response model is assumed, where the probability of the outcome is given by a typical probability distribution. Practitioners can use the provided applet to identify the solution and to know the exact support points and design weights. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Characterization of Coastal Hydraulics: Simple Tools and Sweat Equity

Science.gov (United States)

McInnis, D.; Fertenbaugh, C.; Orou-Pete, S.; Mullen, A.; Smith, C.; Silliman, S. E.; Yalo, N.; Boukari, M.

2009-12-01

. Further, continuing measurements using the “home-made” piezometers and permeameter are providing opportunities for temporal data sets that would not otherwise be possible within the project budget, including access (via boats) to data in regions that are flooded during select times of the year. Finally, initial analysis of the data collected to date show interesting relationships among the various parameters measured, with significant potential in these relationships to both guide the calibration of the numerical model and provide valuable insight into the temporal variability of this coastal system. Implications from this work are that relatively simple tools (developed using classic hydrologic techniques combined with innovative use of local supplies) and sweat equity can provide valuable, if not entirely perfect, field methods for characterization of complex hydrologic systems in the absence of high-budget research programs.

Engaging communities with a simple tool to help increase immunization coverage.

Science.gov (United States)

Jain, Manish; Taneja, Gunjan; Amin, Ruhul; Steinglass, Robert; Favin, Michael

2015-03-01

The level of vaccination coverage in a given community depends on both service factors and the degree to which the public understands and trusts the immunization process. This article describes an approach that aims to raise awareness and boost demand. Developed in India, the "My Village Is My Home" (MVMH) tool, known as Uma Imunizasaun (UI) in Timor-Leste, is a poster-sized material used by volunteers and health workers to record the births and vaccination dates of every infant in a community. Introduction of the tool in 5 districts of India (April 2012 to March 2013) and in 7 initial villages in Timor-Leste (beginning in January 2012) allowed community leaders, volunteers, and health workers to monitor the vaccination status of every young child and guided reminder and motivational visits. In 3 districts of India, we analyzed data on vaccination coverage and timeliness before and during use of the tool; in 2 other districts, analysis was based only on data for new births during use of the tool. In Timor-Leste, we compared UI data from the 3 villages with the most complete data with data for the same villages from the vaccination registers from the previous year. In both countries, we also obtained qualitative data about perceptions of the tool through interviews with health workers and community members. Assessments in both countries found evidence suggesting improved vaccination timeliness and coverage. In India, pilot communities had 80% or higher coverage of identified and eligible children for all vaccines. In comparison, overall coverage in the respective districts during the same time period was much lower, at 49% to 69%. In Timor-Leste, both the number of infants identified and immunized rose substantially with use of the tool compared with the previous year (236 vs. 155, respectively, identified as targets; 185 vs. 147, respectively, received Penta 3). Although data challenges limit firm conclusions, the experiences in both countries suggest that "My

Collaboratively Conceived, Designed and Implemented: Matching Visualization Tools with Geoscience Data Collections and Geoscience Data Collections with Visualization Tools via the ToolMatch Service.

Science.gov (United States)

Hoebelheinrich, N. J.; Lynnes, C.; West, P.; Ferritto, M.

2014-12-01

Two problems common to many geoscience domains are the difficulties in finding tools to work with a given dataset collection, and conversely, the difficulties in finding data for a known tool. A collaborative team from the Earth Science Information Partnership (ESIP) has gotten together to design and create a web service, called ToolMatch, to address these problems. The team began their efforts by defining an initial, relatively simple conceptual model that addressed the two uses cases briefly described above. The conceptual model is expressed as an ontology using OWL (Web Ontology Language) and DCterms (Dublin Core Terms), and utilizing standard ontologies such as DOAP (Description of a Project), FOAF (Friend of a Friend), SKOS (Simple Knowledge Organization System) and DCAT (Data Catalog Vocabulary). The ToolMatch service will be taking advantage of various Semantic Web and Web standards, such as OpenSearch, RESTful web services, SWRL (Semantic Web Rule Language) and SPARQL (Simple Protocol and RDF Query Language). The first version of the ToolMatch service was deployed in early fall 2014. While more complete testing is required, a number of communities besides ESIP member organizations have expressed interest in collaborating to create, test and use the service and incorporate it into their own web pages, tools and / or services including the USGS Data Catalog service, DataONE, the Deep Carbon Observatory, Virtual Solar Terrestrial Observatory (VSTO), and the U.S. Global Change Research Program. In this session, presenters will discuss the inception and development of the ToolMatch service, the collaborative process used to design, refine, and test the service, and future plans for the service.

Simulation tools

CERN Document Server

Jenni, F

2006-01-01

In the last two decades, simulation tools made a significant contribution to the great progress in development of power electronics. Time to market was shortened and development costs were reduced drastically. Falling costs, as well as improved speed and precision, opened new fields of application. Today, continuous and switched circuits can be mixed. A comfortable number of powerful simulation tools is available. The users have to choose the best suitable for their application. Here a simple rule applies: The best available simulation tool is the tool the user is already used to (provided, it can solve the task). Abilities, speed, user friendliness and other features are continuously being improved—even though they are already powerful and comfortable. This paper aims at giving the reader an insight into the simulation of power electronics. Starting with a short description of the fundamentals of a simulation tool as well as properties of tools, several tools are presented. Starting with simplified models ...

A simple method to compare firing pin marks using stereomicroscope and Microsoft office (Windows 8) tools.

Science.gov (United States)

Suresh, R

2017-08-01

Pertinent marks of fired cartridge cases such as firing pin, breech face, extractor, ejector, etc. are used for firearm identification. A non-standard semiautomatic pistol and four .22rim fire cartridges (head stamp KF) is used for known source comparison study. Two test fired cartridge cases are examined under stereomicroscope. The characteristic marks are captured by digital camera and comparative analysis of striation marks is done by using different tools available in the Microsoft word (Windows 8) of a computer system. The similarities of striation marks thus obtained are highly convincing to identify the firearm. In this paper, an effort has been made to study and compare the striation marks of two fired cartridge cases using stereomicroscope, digital camera and computer system. Comparison microscope is not used in this study. The method described in this study is simple, cost effective, transport to field study and can be equipped in a crime scene vehicle to facilitate immediate on spot examination. The findings may be highly helpful to the forensic community, law enforcement agencies and students. Copyright © 2017 Elsevier B.V. All rights reserved.

Analysis of pre-service physics teacher skills designing simple physics experiments based technology

Science.gov (United States)

Susilawati; Huda, C.; Kurniawan, W.; Masturi; Khoiri, N.

2018-03-01

Pre-service physics teacher skill in designing simple experiment set is very important in adding understanding of student concept and practicing scientific skill in laboratory. This study describes the skills of physics students in designing simple experiments based technologicall. The experimental design stages include simple tool design and sensor modification. The research method used is descriptive method with the number of research samples 25 students and 5 variations of simple physics experimental design. Based on the results of interviews and observations obtained the results of pre-service physics teacher skill analysis in designing simple experimental physics charged technology is good. Based on observation result, pre-service physics teacher skill in designing simple experiment is good while modification and sensor application are still not good. This suggests that pre-service physics teacher still need a lot of practice and do experiments in designing physics experiments using sensor modifications. Based on the interview result, it is found that students have high enough motivation to perform laboratory activities actively and students have high curiosity to be skilled at making simple practicum tool for physics experiment.

GPS for QSP: A Summary of the ACoP6 Symposium on Quantitative Systems Pharmacology and a Stage for Near-Term Efforts in the Field.

Science.gov (United States)

Musante, C J; Abernethy, D R; Allerheiligen, S R; Lauffenburger, D A; Zager, M G

2016-09-01

Quantitative Systems Pharmacology (QSP) is experiencing increased application in the drug discovery and development process. Like its older sibling, systems biology, the QSP field is comprised of a mix of established disciplines and methods, from molecular biology to engineering to pharmacometrics. As a result, there exist critical segments of the discipline that differ dramatically in approach and a need to bring these groups together toward a common goal. © 2016 The Authors CPT: Pharmacometrics & Systems Pharmacology published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.

The plant leaf movement analyzer (PALMA): a simple tool for the analysis of periodic cotyledon and leaf movement in Arabidopsis thaliana.

Science.gov (United States)

Wagner, Lucas; Schmal, Christoph; Staiger, Dorothee; Danisman, Selahattin

2017-01-01

The analysis of circadian leaf movement rhythms is a simple yet effective method to study effects of treatments or gene mutations on the circadian clock of plants. Currently, leaf movements are analysed using time lapse photography and subsequent bioinformatics analyses of leaf movements. Programs that are used for this purpose either are able to perform one function (i.e. leaf tip detection or rhythm analysis) or their function is limited to specific computational environments. We developed a leaf movement analysis tool-PALMA-that works in command line and combines image extraction with rhythm analysis using Fast Fourier transformation and non-linear least squares fitting. We validated PALMA in both simulated time series and in experiments using the known short period mutant sensitivity to red light reduced 1 ( srr1 - 1 ). We compared PALMA with two established leaf movement analysis tools and found it to perform equally well. Finally, we tested the effect of reduced iron conditions on the leaf movement rhythms of wild type plants. Here, we found that PALMA successfully detected period lengthening under reduced iron conditions. PALMA correctly estimated the period of both simulated and real-life leaf movement experiments. As a platform-independent console-program that unites both functions needed for the analysis of circadian leaf movements it is a valid alternative to existing leaf movement analysis tools.

Data Center IT Equipment Energy Assessment Tools: Current State of Commercial Tools, Proposal for a Future Set of Assessment Tools

Energy Technology Data Exchange (ETDEWEB)

Radhakrishnan, Ben D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); National Univ., San Diego, CA (United States). School of Engineering

2012-06-30

This research project, which was conducted during the Summer and Fall of 2011, investigated some commercially available assessment tools with a focus on IT equipment to see if such tools could round out the DC Pro tool suite. In this research, the assessment capabilities of the various tools were compiled to help make “non-biased” information available to the public. This research should not be considered to be exhaustive on all existing vendor tools although a number of vendors were contacted. Large IT equipment OEM’s like IBM and Dell provide their proprietary internal automated software which does not work on any other IT equipment. However, found two companies with products that showed promise in performing automated assessments for IT equipment from different OEM vendors. This report documents the research and provides a list of software products reviewed, contacts and websites, product details, discussions with specific companies, a set of recommendations, and next steps. As a result of this research, a simple 3-level approach to an IT assessment tool is proposed along with an example of an assessment using a simple IT equipment data collection tool (Level 1, spreadsheet). The tool has been reviewed with the Green Grid and LBNL staff. The initial feedback has been positive although further refinement to the tool will be necessary. Proposed next steps include a field trial of at least two vendors’ software in two different data centers with an objective to prove the concept, ascertain the extent of energy and computational assessment, ease of installation and opportunities for continuous improvement. Based on the discussions, field trials (or case studies) are proposed with two vendors – JouleX (expected to be completed in 2012) and Sentilla.

Chaos from simple models to complex systems

CERN Document Server

Cencini, Massimo; Vulpiani, Angelo

2010-01-01

Chaos: from simple models to complex systems aims to guide science and engineering students through chaos and nonlinear dynamics from classical examples to the most recent fields of research. The first part, intended for undergraduate and graduate students, is a gentle and self-contained introduction to the concepts and main tools for the characterization of deterministic chaotic systems, with emphasis to statistical approaches. The second part can be used as a reference by researchers as it focuses on more advanced topics including the characterization of chaos with tools of information theor

Assessment of daylight quality in simple rooms

DEFF Research Database (Denmark)

Johnsen, Kjeld; Dubois, Marie-Claude; Sørensen, Karl Grau

The present report documents the results of a study on daylight conditions in simple rooms of residential buildings. The overall objective of the study was to develop a basis for a method for the assessment of daylight quality in a room with simple geometry and window configurations. As a tool...... in daylighting conditions for a number of lighting parameters. The results gave clear indications of, for instance, which room would be the brightest, under which conditions might glare be a problem and which type of window would yield the greatest luminous variation (or visual interest), etc....

Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

International Nuclear Information System (INIS)

Singh, Bhupinder; Diwan, Anubhav; Jain, Varun; Herrera-Gomez, Alberto; Terry, Jeff; Linford, Matthew R.

2016-01-01

Highlights: • Uniqueness plots are introduced as a new tool for identifying poor XPS peak fits. • Uniqueness plots are demonstrated on real XPS data sets. • A horizontal line in a uniqueness plot indicates a poor fit, i.e., fit parameter correlation. • A parabolic shape in a uniqueness plot indicates that a fit may be appropriate. - Abstract: Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ 2 ) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Singh, Bhupinder; Diwan, Anubhav; Jain, Varun [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT, 84606 (United States); Herrera-Gomez, Alberto [CINVESTAV-Unidad Queretaro, Queretaro, 76230 (Mexico); Terry, Jeff [Department of Physics, Illinois Institute of Technology, Chicago, IL, 60616 (United States); Linford, Matthew R., E-mail: mrlinford@chem.byu.edu [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT, 84606 (United States)

2016-11-30

Highlights: • Uniqueness plots are introduced as a new tool for identifying poor XPS peak fits. • Uniqueness plots are demonstrated on real XPS data sets. • A horizontal line in a uniqueness plot indicates a poor fit, i.e., fit parameter correlation. • A parabolic shape in a uniqueness plot indicates that a fit may be appropriate. - Abstract: Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ{sup 2}) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

A Simple Evaluation Tool (ET-CET) Indicates Increase of Diagnostic Skills From Small Bowel Capsule Endoscopy Training Courses

Science.gov (United States)

Albert, J.G.; Humbla, O.; McAlindon, M.E.; Davison, C.; Seitz, U.; Fraser, C.; Hagenmüller, F.; Noetzel, E.; Spada, C.; Riccioni, M.E.; Barnert, J.; Filmann, N.; Keuchel, M.

2015-01-01

Abstract Small bowel capsule endoscopy (SBCE) has become a first line diagnostic tool. Several training courses with a similar format have been established in Europe; however, data on learning curve and training in SBCE remain sparse. Between 2008 and 2011, different basic SBCE training courses were organized internationally in UK (n = 2), Italy (n = 2), Germany (n = 2), Finland (n = 1), and nationally in Germany (n = 10), applying similar 8-hour curricula with 50% lectures and 50% hands-on training. The Given PillCam System was used in 12 courses, the Olympus EndoCapsule system in 5, respectively. A simple evaluation tool for capsule endoscopy training (ET-CET) was developed using 10 short SBCE videos including relevant lesions and normal or irrelevant findings. For each video, delegates were required to record a diagnosis (achievable total score from 0 to 10) and the clinical relevance (achievable total score 0 to 10). ET-CET was performed at baseline before the course and repeated, with videos in altered order, after the course. Two hundred ninety-four delegates (79.3% physicians, 16.3% nurses, 4.4% others) were included for baseline analysis, 268 completed the final evaluation. Forty percent had no previous experience in SBCE, 33% had performed 10 or less procedures. Median scores for correct diagnosis improved from 4.0 (IQR 3) to 7.0 (IQR 3) during the courses (P endoscopy may be useful before attending an SBCE course. PMID:26512623

Application of a simple, affordable quality metric tool to colorectal, upper gastrointestinal, hernia, and hepatobiliary surgery patients: the HARM score.

Science.gov (United States)

Brady, Justin T; Ko, Bona; Hohmann, Samuel F; Crawshaw, Benjamin P; Leinicke, Jennifer A; Steele, Scott R; Augestad, Knut M; Delaney, Conor P

2018-06-01

Quality is the major driver for both clinical and financial assessment. There remains a need for simple, affordable, quality metric tools to evaluate patient outcomes, which led us to develop the HospitAl length of stay, Readmission and Mortality (HARM) score. We hypothesized that the HARM score would be a reliable tool to assess patient outcomes across various surgical specialties. From 2011 to 2015, we identified colorectal, hepatobiliary, upper gastrointestinal, and hernia surgery admissions using the Vizient Clinical Database. Individual and hospital HARM scores were calculated from length of stay, 30-day readmission, and mortality rates. We evaluated the correlation of HARM scores with complication rates using the Clavien-Dindo classification. We identified 525,083 surgical patients: 206,981 colorectal, 164,691 hepatobiliary, 97,157 hernia, and 56,254 upper gastrointestinal. Overall, 53.8% of patients were admitted electively with a mean HARM score of 2.24; 46.2% were admitted emergently with a mean HARM score of 1.45 (p  4 (p  4, complication rates were 9.3, 23.2, 38.8, and 71.6%, respectively. There was a similar trend for increasing HARM score in emergent admissions as well. For all surgical procedure categories, increasing HARM score, with and without risk adjustment, correlated with increasing severity of complications by Clavien-Dindo classification. The HARM score is an easy-to-use quality metric that correlates with increasing complication rates and complication severity across multiple surgical disciplines when evaluated on a large administrative database. This inexpensive tool could be adopted across multiple institutions to compare the quality of surgical care.

uVis: A Formula-Based Visualization Tool

DEFF Research Database (Denmark)

Pantazos, Kostas; Xu, Shangjin; Kuhail, Mohammad Amin

Several tools use programming approaches for developing advanced visualizations. Others can with a few steps create simple visualizations with built-in patterns, and users with limited IT experience can use them. However, it is programming and time demanding to create and customize...... these visualizations. We introduce uVis, a tool that allows users with advanced spreadsheet-like IT knowledge and basic database understanding to create simple as well as advanced visualizations. These users construct visualizations by combining building blocks (i.e. controls, shapes). They specify spreadsheet...

STAR- A SIMPLE TOOL FOR AUTOMATED REASONING SUPPORTING HYBRID APPLICATIONS OF ARTIFICIAL INTELLIGENCE (UNIX VERSION)

Science.gov (United States)

Borchardt, G. C.

1994-01-01

The Simple Tool for Automated Reasoning program (STAR) is an interactive, interpreted programming language for the development and operation of artificial intelligence (AI) application systems. STAR provides an environment for integrating traditional AI symbolic processing with functions and data structures defined in compiled languages such as C, FORTRAN and PASCAL. This type of integration occurs in a number of AI applications including interpretation of numerical sensor data, construction of intelligent user interfaces to existing compiled software packages, and coupling AI techniques with numerical simulation techniques and control systems software. The STAR language was created as part of an AI project for the evaluation of imaging spectrometer data at NASA's Jet Propulsion Laboratory. Programming in STAR is similar to other symbolic processing languages such as LISP and CLIP. STAR includes seven primitive data types and associated operations for the manipulation of these structures. A semantic network is used to organize data in STAR, with capabilities for inheritance of values and generation of side effects. The AI knowledge base of STAR can be a simple repository of records or it can be a highly interdependent association of implicit and explicit components. The symbolic processing environment of STAR may be extended by linking the interpreter with functions defined in conventional compiled languages. These external routines interact with STAR through function calls in either direction, and through the exchange of references to data structures. The hybrid knowledge base may thus be accessed and processed in general by either side of the application. STAR is initially used to link externally compiled routines and data structures. It is then invoked to interpret the STAR rules and symbolic structures. In a typical interactive session, the user enters an expression to be evaluated, STAR parses the input, evaluates the expression, performs any file input

A Simple Evacuation Modeling and Simulation Tool for First Responders

Energy Technology Data Exchange (ETDEWEB)

Koch, Daniel B [ORNL; Payne, Patricia W [ORNL

2015-01-01

Although modeling and simulation of mass evacuations during a natural or man-made disaster is an on-going and vigorous area of study, tool adoption by front-line first responders is uneven. Some of the factors that account for this situation include cost and complexity of the software. For several years, Oak Ridge National Laboratory has been actively developing the free Incident Management Preparedness and Coordination Toolkit (IMPACT) to address these issues. One of the components of IMPACT is a multi-agent simulation module for area-based and path-based evacuations. The user interface is designed so that anyone familiar with typical computer drawing tools can quickly author a geospatially-correct evacuation visualization suitable for table-top exercises. Since IMPACT is designed for use in the field where network communications may not be available, quick on-site evacuation alternatives can be evaluated to keep pace with a fluid threat situation. Realism is enhanced by incorporating collision avoidance into the simulation. Statistics are gathered as the simulation unfolds, including most importantly time-to-evacuate, to help first responders choose the best course of action.

Social Network Analysis: A Simple but Powerful Tool for Identifying Teacher Leaders

Science.gov (United States)

Smith, P. Sean; Trygstad, Peggy J.; Hayes, Meredith L.

2018-01-01

Instructional teacher leadership is central to a vision of distributed leadership. However, identifying instructional teacher leaders can be a daunting task, particularly for administrators who find themselves either newly appointed or faced with high staff turnover. This article describes the use of social network analysis (SNA), a simple but…

LETOS -- A Lightweight Execution Tool for Operational Semantics

NARCIS (Netherlands)

Hartel, Pieter H.

A simple tool is proposed to aid in the development of operational semantics. The tool supports publication quality rendering using LATEX execution and animation using a functional programming system and derivation tree browsing using Netscape. The tool has been implemented and it has been used on a

Design tools

Science.gov (United States)

Anton TenWolde; Mark T. Bomberg

2009-01-01

Overall, despite the lack of exact input data, the use of design tools, including models, is much superior to the simple following of rules of thumbs, and a moisture analysis should be standard procedure for any building envelope design. Exceptions can only be made for buildings in the same climate, similar occupancy, and similar envelope construction. This chapter...

Nutrition screening tools: an analysis of the evidence.

Science.gov (United States)

Skipper, Annalynn; Ferguson, Maree; Thompson, Kyle; Castellanos, Victoria H; Porcari, Judy

2012-05-01

In response to questions about tools for nutrition screening, an evidence analysis project was developed to identify the most valid and reliable nutrition screening tools for use in acute care and hospital-based ambulatory care settings. An oversight group defined nutrition screening and literature search criteria. A trained analyst conducted structured searches of the literature for studies of nutrition screening tools according to predetermined criteria. Eleven nutrition screening tools designed to detect undernutrition in patients in acute care and hospital-based ambulatory care were identified. Trained analysts evaluated articles for quality using criteria specified by the American Dietetic Association's Evidence Analysis Library. Members of the oversight group assigned quality grades to the tools based on the quality of the supporting evidence, including reliability and validity data. One tool, the NRS-2002, received a grade I, and 4 tools-the Simple Two-Part Tool, the Mini-Nutritional Assessment-Short Form (MNA-SF), the Malnutrition Screening Tool (MST), and Malnutrition Universal Screening Tool (MUST)-received a grade II. The MST was the only tool shown to be both valid and reliable for identifying undernutrition in the settings studied. Thus, validated nutrition screening tools that are simple and easy to use are available for application in acute care and hospital-based ambulatory care settings.

PRACTICAL APPLICATION OF QUALITY TOOLS

Directory of Open Access Journals (Sweden)

Duško Pavletić

2008-09-01

Full Text Available The paper is dealing with one segment of broader research of universality an systematicness in application of seven basic quality tools (7QC tools, which is possible to use in different areas: power plant, process industry, government, health and tourism services. The aim of the paper was to show on practical examples that there is real possibility of application of 7QC tools. Furthermore, the research has to show to what extent are selected tools in usage and what reasons of avoiding their broader application are. The simple example of successful application of the quality tools are shown on selected company in process industry.

Developing a Social Media Marketing tool

OpenAIRE

Valova, Olga

2015-01-01

The objective of the thesis is to develop a better, easier to use social media marketing tool that could be utilised in any business. By understanding and analysing how business uses social media as well as currently available social media marketing tools, design a tool with the maximum amount of features, but with a simple and intuitive User Interface. An agile software development life cycle was used throughout the creation of the tool. Qualitative analysis was used to analyse existing ...

The Monash University Interactive Simple Climate Model

Science.gov (United States)

Dommenget, D.

2013-12-01

The Monash university interactive simple climate model is a web-based interface that allows students and the general public to explore the physical simulation of the climate system with a real global climate model. It is based on the Globally Resolved Energy Balance (GREB) model, which is a climate model published by Dommenget and Floeter [2011] in the international peer review science journal Climate Dynamics. The model simulates most of the main physical processes in the climate system in a very simplistic way and therefore allows very fast and simple climate model simulations on a normal PC computer. Despite its simplicity the model simulates the climate response to external forcings, such as doubling of the CO2 concentrations very realistically (similar to state of the art climate models). The Monash simple climate model web-interface allows you to study the results of more than a 2000 different model experiments in an interactive way and it allows you to study a number of tutorials on the interactions of physical processes in the climate system and solve some puzzles. By switching OFF/ON physical processes you can deconstruct the climate and learn how all the different processes interact to generate the observed climate and how the processes interact to generate the IPCC predicted climate change for anthropogenic CO2 increase. The presentation will illustrate how this web-base tool works and what are the possibilities in teaching students with this tool are.

A simple tool to help decision making in infrastructure planning and ...

African Journals Online (AJOL)

2006-10-04

Oct 4, 2006 ... a tool to help decision making for planning and management of phytotreatment ... mental studies aimed at the quantitative estimation of biologi- cal processes .... water has been simulated with a logistic model assuming an.

Introduction, comparison, and validation of Meta-Essentials : A free and simple tool for meta-analysis

NARCIS (Netherlands)

R. Suurmond (Robert); H.J. van Rhee (Henk); A. Hak (Tony)

2017-01-01

markdownabstractWe present a new tool for meta‐analysis, _Meta‐Essentials_, which is free of charge and easy to use. In this paper, we introduce the tool and compare its features to other tools for meta‐analysis.We also provide detailed information on the validation of the tool. Although free of

DNA barcoding coupled to HRM analysis as a new and simple tool for the authentication of Gadidae fish species.

Science.gov (United States)

Fernandes, Telmo J R; Costa, Joana; Oliveira, M Beatriz P P; Mafra, Isabel

2017-09-01

This work aimed to exploit the use of DNA mini-barcodes combined with high resolution melting (HRM) for the authentication of gadoid species: Atlantic cod (Gadus morhua), Pacific cod (Gadus macrocephalus), Alaska pollock (Theragra chalcogramma) and saithe (Pollachius virens). Two DNA barcode regions, namely cytochrome c oxidase subunit I (COI) and cytochrome b (cytb), were analysed in silico to identify genetic variability among the four species and used, subsequently, to develop a real-time PCR method coupled with HRM analysis. The cytb mini-barcode enabled best discrimination of the target species with a high level of confidence (99.3%). The approach was applied successfully to identify gadoid species in 30 fish-containing foods, 30% of which were not as declared on the label. Herein, a novel approach for rapid, simple and cost-effective discrimination/clustering, as a tool to authenticate Gadidae fish species, according to their genetic relationship, is proposed. Copyright © 2017 Elsevier Ltd. All rights reserved.

A simple mechanical model for the isotropic harmonic oscillator

International Nuclear Information System (INIS)

Nita, Gelu M

2010-01-01

A constrained elastic pendulum is proposed as a simple mechanical model for the isotropic harmonic oscillator. The conceptual and mathematical simplicity of this model recommends it as an effective pedagogical tool in teaching basic physics concepts at advanced high school and introductory undergraduate course levels.

Optimized theory for simple and molecular fluids.

Science.gov (United States)

Marucho, M; Montgomery Pettitt, B

2007-03-28

An optimized closure approximation for both simple and molecular fluids is presented. A smooth interpolation between Perkus-Yevick and hypernetted chain closures is optimized by minimizing the free energy self-consistently with respect to the interpolation parameter(s). The molecular version is derived from a refinement of the method for simple fluids. In doing so, a method is proposed which appropriately couples an optimized closure with the variant of the diagrammatically proper integral equation recently introduced by this laboratory [K. M. Dyer et al., J. Chem. Phys. 123, 204512 (2005)]. The simplicity of the expressions involved in this proposed theory has allowed the authors to obtain an analytic expression for the approximate excess chemical potential. This is shown to be an efficient tool to estimate, from first principles, the numerical value of the interpolation parameters defining the aforementioned closure. As a preliminary test, representative models for simple fluids and homonuclear diatomic Lennard-Jones fluids were analyzed, obtaining site-site correlation functions in excellent agreement with simulation data.

Comparison of the most used game development tools

OpenAIRE

Soukup, Martin

2017-01-01

This thesis deals with comparison of most used game development tools. Author places game development tools in context of today´s game industry, analyses state of the market and the latest trends in the field of game development tools. The largest part of this thesis is aimed at comparing game development tools, where five tools are selected, overviewed and compared by specified criteria. Author demonstrates several basic features of chosen game development tool on development of a simple And...

jQuery Tools UI Library

CERN Document Server

Libby, Alex

2012-01-01

A practical tutorial with powerful yet simple projects that are quick to implement. This book is aimed at developers who have prior jQuery knowledge, but may not have any prior experience with jQuery Tools. It is possible that they may have started with the basics of jQuery Tools, but want to learn more about how it can be used, as well as get ideas for future projects.

STAR- A SIMPLE TOOL FOR AUTOMATED REASONING SUPPORTING HYBRID APPLICATIONS OF ARTIFICIAL INTELLIGENCE (DEC VAX VERSION)

Science.gov (United States)

Borchardt, G. C.

1994-01-01

The Simple Tool for Automated Reasoning program (STAR) is an interactive, interpreted programming language for the development and operation of artificial intelligence (AI) application systems. STAR provides an environment for integrating traditional AI symbolic processing with functions and data structures defined in compiled languages such as C, FORTRAN and PASCAL. This type of integration occurs in a number of AI applications including interpretation of numerical sensor data, construction of intelligent user interfaces to existing compiled software packages, and coupling AI techniques with numerical simulation techniques and control systems software. The STAR language was created as part of an AI project for the evaluation of imaging spectrometer data at NASA's Jet Propulsion Laboratory. Programming in STAR is similar to other symbolic processing languages such as LISP and CLIP. STAR includes seven primitive data types and associated operations for the manipulation of these structures. A semantic network is used to organize data in STAR, with capabilities for inheritance of values and generation of side effects. The AI knowledge base of STAR can be a simple repository of records or it can be a highly interdependent association of implicit and explicit components. The symbolic processing environment of STAR may be extended by linking the interpreter with functions defined in conventional compiled languages. These external routines interact with STAR through function calls in either direction, and through the exchange of references to data structures. The hybrid knowledge base may thus be accessed and processed in general by either side of the application. STAR is initially used to link externally compiled routines and data structures. It is then invoked to interpret the STAR rules and symbolic structures. In a typical interactive session, the user enters an expression to be evaluated, STAR parses the input, evaluates the expression, performs any file input

Computer electronics made simple computerbooks

CERN Document Server

Bourdillon, J F B

1975-01-01

Computer Electronics: Made Simple Computerbooks presents the basics of computer electronics and explains how a microprocessor works. Various types of PROMs, static RAMs, dynamic RAMs, floppy disks, and hard disks are considered, along with microprocessor support devices made by Intel, Motorola and Zilog. Bit slice logic and some AMD bit slice products are also described. Comprised of 14 chapters, this book begins with an introduction to the fundamentals of hardware design, followed by a discussion on the basic building blocks of hardware (NAND, NOR, AND, OR, NOT, XOR); tools and equipment that

The simple agricultural kit improving life for Nepal's terrace farmers ...

International Development Research Centre (IDRC) Digital Library (Canada)

2017-08-16

Aug 16, 2017 ... Nepalese women use a handheld sheller to remove kernels from corn cobs. ... few cheap, simple tools could be a boon for the men and women who work the region's soil. ... Resilient poultry management for women in Kenya.

A Medieval Clock Made out of Simple Materials

Science.gov (United States)

Danese, B.; Oss, S.

2008-01-01

A cheap replica of the verge-and-foliot clock has been built from simple materials. It is a didactic tool of great power for physics teaching at every stage of schooling, in particular at university level. An account is given of its construction and its working principles, together with motivated examples of a few activities. (Contains 3 tables…

Tribological influence of tool surface roughness within microforming

DEFF Research Database (Denmark)

Eriksen, Rasmus Solmer; Weidel, S.; Hansen, Hans Nørgaard

2010-01-01

A comparative friction study of tooling dies with a simple internal cylindrical geometry has been performed. The purpose of the experiment consist of studying the influence of the surface characteristics of tooling dies on the frictional behaviour in a micro bulk forming operation. This research ...

The Case for Simple Object-Orientation in VDM++

DEFF Research Database (Denmark)

Ernst, Erik

2010-01-01

on such a simple core language with few but full-fledged features, additional features could then be supported by means of a reduction to the core language, which allows for an open-ended set of additional features including multiple variants. This approach reduces the complexity for tool implementers, and ensures...

User manual for two simple postscript output FORTRAN plotting routines

Science.gov (United States)

Nguyen, T. X.

1991-01-01

Graphics is one of the important tools in engineering analysis and design. However, plotting routines that generate output on high quality laser printers normally come in graphics packages, which tend to be expensive and system dependent. These factors become important for small computer systems or desktop computers, especially when only some form of a simple plotting routine is sufficient. With the Postscript language becoming popular, there are more and more Postscript laser printers now available. Simple, versatile, low cost plotting routines that can generate output on high quality laser printers are needed and standard FORTRAN language plotting routines using output in Postscript language seems logical. The purpose here is to explain two simple FORTRAN plotting routines that generate output in Postscript language.

Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

Science.gov (United States)

Singh, Bhupinder; Diwan, Anubhav; Jain, Varun; Herrera-Gomez, Alberto; Terry, Jeff; Linford, Matthew R.

2016-11-01

Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ2) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

Simple Parametric Model for Airfoil Shape Description

Science.gov (United States)

Ziemkiewicz, David

2017-12-01

We show a simple, analytic equation describing a class of two-dimensional shapes well suited for representation of aircraft airfoil profiles. Our goal was to create a description characterized by a small number of parameters with easily understandable meaning, providing a tool to alter the shape with optimization procedures as well as manual tweaks by the designer. The generated shapes are well suited for numerical analysis with 2D flow solving software such as XFOIL.

Leishmania OligoC-TesT as a simple, rapid, and standardized tool for molecular diagnosis of cutaneous leishmaniasis in Peru.

Science.gov (United States)

Espinosa, Diego; Boggild, Andrea K; Deborggraeve, Stijn; Laurent, Thierry; Valencia, Cristian; Pacheco, Rosa; Miranda-Verástegui, César; Llanos-Cuentas, Alejandro; Leclipteux, Thierry; Dujardin, Jean-Claude; Büscher, Philippe; Arévalo, Jorge

2009-08-01

Molecular methods such as PCR have become attractive tools for diagnosis of cutaneous leishmaniasis (CL), both for their high sensitivity and for their specificity. However, their practical use in routine diagnosis is limited due to the infrastructural requirements and the lack of any standardization. Recently, a simplified and standardized PCR format for molecular detection of Leishmania was developed. The Leishmania OligoC-TesT is based on simple and rapid detection using a dipstick with PCR-amplified Leishmania DNA. In this study, we estimated the diagnostic accuracy of the Leishmania OligoC-TesT for 61 specimens from 44 CL-suspected patients presenting at the leishmaniasis clinic of the Instituto de Medicina Tropical Alexander von Humboldt, Peru. On the basis of parasitological detection and the leishmanin skin test (LST), patients were classified as (i) confirmed CL cases, (ii) LST-positive cases, and (iii) LST-negative cases. The sensitivities of the Leishmania OligoC-TesT was 74% (95% confidence interval (CI), 60.5% to 84.1%) for lesion aspirates and 92% (95% CI, 81.2% to 96.9%) for scrapings. A significantly higher sensitivity was observed with a conventional PCR targeting the kinetoplast DNA on the aspirates (94%) (P = 0.001), while there was no significant difference in sensitivity for the lesion scrapings (88%) (P = 0.317). In addition, the Leishmania OligoC-TesT was evaluated for 13 CL-suspected patients in two different peripheral health centers in the central jungle of Peru. Our findings clearly indicate the high accuracy of the Leishmania OligoC-TesT for lesion scrapings for simple and rapid molecular diagnosis of CL in Peru.

Leishmania OligoC-TesT as a Simple, Rapid, and Standardized Tool for Molecular Diagnosis of Cutaneous Leishmaniasis in Peru▿

Science.gov (United States)

Espinosa, Diego; Boggild, Andrea K.; Deborggraeve, Stijn; Laurent, Thierry; Valencia, Cristian; Pacheco, Rosa; Miranda-Verástegui, César; Llanos-Cuentas, Alejandro; Leclipteux, Thierry; Dujardin, Jean-Claude; Büscher, Philippe; Arévalo, Jorge

2009-01-01

Molecular methods such as PCR have become attractive tools for diagnosis of cutaneous leishmaniasis (CL), both for their high sensitivity and for their specificity. However, their practical use in routine diagnosis is limited due to the infrastructural requirements and the lack of any standardization. Recently, a simplified and standardized PCR format for molecular detection of Leishmania was developed. The Leishmania OligoC-TesT is based on simple and rapid detection using a dipstick with PCR-amplified Leishmania DNA. In this study, we estimated the diagnostic accuracy of the Leishmania OligoC-TesT for 61 specimens from 44 CL-suspected patients presenting at the leishmaniasis clinic of the Instituto de Medicina Tropical Alexander von Humboldt, Peru. On the basis of parasitological detection and the leishmanin skin test (LST), patients were classified as (i) confirmed CL cases, (ii) LST-positive cases, and (iii) LST-negative cases. The sensitivities of the Leishmania OligoC-TesT was 74% (95% confidence interval (CI), 60.5% to 84.1%) for lesion aspirates and 92% (95% CI, 81.2% to 96.9%) for scrapings. A significantly higher sensitivity was observed with a conventional PCR targeting the kinetoplast DNA on the aspirates (94%) (P = 0.001), while there was no significant difference in sensitivity for the lesion scrapings (88%) (P = 0.317). In addition, the Leishmania OligoC-TesT was evaluated for 13 CL-suspected patients in two different peripheral health centers in the central jungle of Peru. Our findings clearly indicate the high accuracy of the Leishmania OligoC-TesT for lesion scrapings for simple and rapid molecular diagnosis of CL in Peru. PMID:19553579

Simple equation method for nonlinear partial differential equations and its applications

Directory of Open Access Journals (Sweden)

Taher A. Nofal

2016-04-01

Full Text Available In this article, we focus on the exact solution of the some nonlinear partial differential equations (NLPDEs such as, Kodomtsev–Petviashvili (KP equation, the (2 + 1-dimensional breaking soliton equation and the modified generalized Vakhnenko equation by using the simple equation method. In the simple equation method the trial condition is the Bernoulli equation or the Riccati equation. It has been shown that the method provides a powerful mathematical tool for solving nonlinear wave equations in mathematical physics and engineering problems.

Cluster Flow: A user-friendly bioinformatics workflow tool [version 1; referees: 3 approved

Directory of Open Access Journals (Sweden)

Philip Ewels

2016-12-01

Full Text Available Pipeline tools are becoming increasingly important within the field of bioinformatics. Using a pipeline manager to manage and run workflows comprised of multiple tools reduces workload and makes analysis results more reproducible. Existing tools require significant work to install and get running, typically needing pipeline scripts to be written from scratch before running any analysis. We present Cluster Flow, a simple and flexible bioinformatics pipeline tool designed to be quick and easy to install. Cluster Flow comes with 40 modules for common NGS processing steps, ready to work out of the box. Pipelines are assembled using these modules with a simple syntax that can be easily modified as required. Core helper functions automate many common NGS procedures, making running pipelines simple. Cluster Flow is available with an GNU GPLv3 license on GitHub. Documentation, examples and an online demo are available at http://clusterflow.io.

Mitogenomes from type specimens, a genotyping tool for morphologically simple species: ten genomes of agar-producing red algae.

Science.gov (United States)

Boo, Ga Hun; Hughey, Jeffery R; Miller, Kathy Ann; Boo, Sung Min

2016-10-14

DNA sequences from type specimens provide independent, objective characters that enhance the value of type specimens and permit the correct application of species names to phylogenetic clades and specimens. We provide mitochondrial genomes (mitogenomes) from archival type specimens of ten species in agar-producing red algal genera Gelidium and Pterocladiella. The genomes contain 43-44 genes, ranging in size from 24,910 to 24,970 bp with highly conserved gene synteny. Low Ka/Ks ratios of apocytochrome b and cytochrome oxidase genes support their utility as markers. Phylogenies of mitogenomes and cox1+rbcL sequences clarified classification at the genus and species levels. Three species formerly in Gelidium and Pterocladia are transferred to Pterocladiella: P. media comb. nov., P. musciformis comb. nov., and P. luxurians comb. and stat. nov. Gelidium sinicola is merged with G. coulteri because they share identical cox1 and rbcL sequences. We describe a new species, Gelidium millariana sp. nov., previously identified as G. isabelae from Australia. We demonstrate that mitogenomes from type specimens provide a new tool for typifying species in the Gelidiales and that there is an urgent need for analyzing mitogenomes from type specimens of red algae and other morphologically simple organisms for insight into their nomenclature, taxonomy and evolution.

The BRITNeY Suite Animation Tool

DEFF Research Database (Denmark)

Westergaard, Michael; Lassen, Kristian Bisgaard

2006-01-01

This paper describes the BRITNeY suite, a tool which enables users to create visualizations of formal models. BRITNeY suite is integrated with CPN Tools, and we give an example of how to extend a simple stop-and-wait protocol with a visualization in the form of message sequence charts. We also sh...... examples of animations created during industrial projects to give an impression of what is possible with the BRITNeY suite....

EASY: a simple tool for simultaneously removing background, deadtime and acoustic ringing in quantitative NMR spectroscopy--part I: basic principle and applications.

Science.gov (United States)

Jaeger, Christian; Hemmann, Felix

2014-01-01

Elimination of Artifacts in NMR SpectroscopY (EASY) is a simple but very effective tool to remove simultaneously any real NMR probe background signal, any spectral distortions due to deadtime ringdown effects and -specifically- severe acoustic ringing artifacts in NMR spectra of low-gamma nuclei. EASY enables and maintains quantitative NMR (qNMR) as only a single pulse (preferably 90°) is used for data acquisition. After the acquisition of the first scan (it contains the wanted NMR signal and the background/deadtime/ringing artifacts) the same experiment is repeated immediately afterwards before the T1 waiting delay. This second scan contains only the background/deadtime/ringing parts. Hence, the simple difference of both yields clean NMR line shapes free of artefacts. In this Part I various examples for complete (1)H, (11)B, (13)C, (19)F probe background removal due to construction parts of the NMR probes are presented. Furthermore, (25)Mg EASY of Mg(OH)2 is presented and this example shows how extremely strong acoustic ringing can be suppressed (more than a factor of 200) such that phase and baseline correction for spectra acquired with a single pulse is no longer a problem. EASY is also a step towards deadtime-free data acquisition as these effects are also canceled completely. EASY can be combined with any other NMR experiment, including 2D NMR, if baseline distortions are a big problem. © 2013 Published by Elsevier Inc.

Drip Planner Chart: a simple irrigation scheduling tool for smallholder drip farmers

NARCIS (Netherlands)

Boesveld, H.; Zisengwe, L.S.; Yakami, S.

2012-01-01

Drip irrigation is widely recognized as potentially one of the most efficient irrigation methods. However, this efficiency is often not achieved because systems are not always well designed or maintained and many farmers lack the tools to assess the crop water requirements and to monitor the soil

Lightweight object oriented structure analysis: tools for building tools to analyze molecular dynamics simulations.

Science.gov (United States)

Romo, Tod D; Leioatts, Nicholas; Grossfield, Alan

2014-12-15

LOOS (Lightweight Object Oriented Structure-analysis) is a C++ library designed to facilitate making novel tools for analyzing molecular dynamics simulations by abstracting out the repetitive tasks, allowing developers to focus on the scientifically relevant part of the problem. LOOS supports input using the native file formats of most common biomolecular simulation packages, including CHARMM, NAMD, Amber, Tinker, and Gromacs. A dynamic atom selection language based on the C expression syntax is included and is easily accessible to the tool-writer. In addition, LOOS is bundled with over 140 prebuilt tools, including suites of tools for analyzing simulation convergence, three-dimensional histograms, and elastic network models. Through modern C++ design, LOOS is both simple to develop with (requiring knowledge of only four core classes and a few utility functions) and is easily extensible. A python interface to the core classes is also provided, further facilitating tool development. © 2014 Wiley Periodicals, Inc.

Benefits and Pitfalls: Simple Guidelines for the Use of Social Networking Tools in K-12 Education

Science.gov (United States)

Huffman, Stephanie

2013-01-01

The article will outline a framework for the use of social networking tools in K-12 education framed around four thought provoking questions: 1) what are the benefits and pitfalls of using social networking tools in P-12 education, 2) how do we plan effectively for the use of social networking tool, 3) what role does professional development play…

Cognitive ergonomics of operational tools

International Nuclear Information System (INIS)

Luedeke, A.

2012-01-01

Control systems have become increasingly more powerful over the past decades. The availability of high data throughput and sophisticated graphical interactions has opened a variety of new possibilities. But has this helped to provide intuitive, easy to use applications to simplify the operation of modern large scale accelerator facilities? We will discuss what makes an application useful to operation and what is necessary to make a tool easy to use. We will show that even the implementation of a small number of simple application design rules can help to create ergonomic operational tools. The author is convinced that such tools do indeed help to achieve higher beam availability and better beam performance at all accelerator facilities. (author)

Some considerations on the restoration of Galilei invariance in the nuclear many-body problem. Pt. I. Mathematical tools, spectral functions and spectroscopic factors of simple bound states

International Nuclear Information System (INIS)

Schmid, K.W.

2001-01-01

The mathematical tools to restore Galilei invariance in the nuclear many-body problem with the help of projection techniques are presented. For simple oscillator configurations recursion relations for the various elementary contractions are derived. The method is then applied to simple configurations for the ground states of 4 He, 16 O and 40 Ca as well as to the corresponding one-hole and one-particle states. As a first application the spectral functions and spectroscopic factors for the above-mentioned doubly even nuclei are investigated. It turns out that the conventional picture of an uncorrelated system underestimates the single-particle strengths of the hole states from the last occupied shell while that of the higher excited hole states is overestimated considerably. These results are in complete agreement with those derived by Dieperink and de Forest using different methods. Similar effects are seen for the particle states which have not been studied before. All the calculations presented here are performed analytically and thus can be checked explicitly by the interested reader. (orig.)

Semantic markup of sensor capabilities: how simple it too simple?

Science.gov (United States)

Rueda-Velasquez, C. A.; Janowicz, K.; Fredericks, J.

2016-12-01

Semantics plays a key role for the publication, retrieval, integration, and reuse of observational data across the geosciences. In most cases, one can safely assume that the providers of such data, e.g., individual scientists, understand the observation context in which their data are collected,e.g., the used observation procedure, the sampling strategy, the feature of interest being studied, and so forth. However, can we expect that the same is true for the technical details of the used sensors and especially the nuanced changes that can impact observations in often unpredictable ways? Should the burden of annotating the sensor capabilities, firmware, operation ranges, and so forth be really part of a scientist's responsibility? Ideally, semantic annotations should be provided by the parties that understand these details and have a vested interest in maintaining these data. With manufactures providing semantically-enabled metadata for their sensors and instruments, observations could more easily be annotated and thereby enriched using this information. Unfortunately, today's sensor ontologies and tool chains developed for the Semantic Web community require expertise beyond the knowledge and interest of most manufacturers. Consequently, knowledge engineers need to better understand the sweet spot between simple ontologies/vocabularies and sufficient expressivity as well as the tools required to enable manufacturers to share data about their sensors. Here, we report on the current results of EarthCube's X-Domes project that aims to address the questions outlined above.

Prevention of "simple accidents at work" with major consequences

DEFF Research Database (Denmark)

Jørgensen, Kirsten

2016-01-01

broadly. This review identifies gaps in the prevention of simple accidents, relating to safety barriers for risk control and the management processes that need to be in place to deliver those risk controls in a continuingly effective state. The article introduces the ‘‘INFO cards’’ as a tool......The concept ‘‘simple accidents’’ is understood as traumatic events with one victim. In the last 10 years many European countries have seen a decline in the number of fatalities, but there still remain many severe accidents at work. In the years 2009–2010 in European countries 2.0–2.4 million...... occupational accidents a year were notified leading to 4500 fatalities and 90,000 permanent disabilities each year. The article looks at the concept ‘‘accident’’ to find similarities and distinctions between major and simple accident characteristics. The purpose is to find to what extent the same kinds...

Simple relation algebras

CERN Document Server

Givant, Steven

2017-01-01

This monograph details several different methods for constructing simple relation algebras, many of which are new with this book. By drawing these seemingly different methods together, all are shown to be aspects of one general approach, for which several applications are given. These tools for constructing and analyzing relation algebras are of particular interest to mathematicians working in logic, algebraic logic, or universal algebra, but will also appeal to philosophers and theoretical computer scientists working in fields that use mathematics. The book is written with a broad audience in mind and features a careful, pedagogical approach; an appendix contains the requisite background material in relation algebras. Over 400 exercises provide ample opportunities to engage with the material, making this a monograph equally appropriate for use in a special topics course or for independent study. Readers interested in pursuing an extended background study of relation algebras will find a comprehensive treatme...

Solution of a simple inelastic scattering problem

International Nuclear Information System (INIS)

Knudson, S.K.

1975-01-01

Simple examples of elastic scattering, typically from square wells, serve as important pedagogical tools in discussion of the concepts and processes involved in elastic scattering events. An analytic solution of a model inelastic scattering system is presented here to serve in this role for inelastic events. The model and its solution are simple enough to be of pedagogical utility, but also retain enough of the important physical features to include most of the special characteristics of inelastic systems. The specific model chosen is the collision of an atom with a harmonic oscillator, interacting via a repulsive square well potential. Pedagogically important features of inelastic scattering, including its multistate character, convergence behavior, and dependence on an ''inelastic potential'' are emphasized as the solution is determined. Results are presented for various energies and strengths of inelastic scattering, which show that the model is capable of providing an elementary representation of vibrationally inelastic scattering

Improving groundwater management in rural India using simple modeling tools with minimal data requirements

Science.gov (United States)

Moysey, S. M.; Oblinger, J. A.; Ravindranath, R.; Guha, C.

2008-12-01

Water scarcity is a crisis in central India that impacts the health, productivity, and quality of life of millions of people. The use of water harvesting structures (WHS) to capture runoff and enhance groundwater recharge is widely seen as a viable solution to this problem. As a result, there has been an explosion of small dam construction to extend community access to groundwater in the dry season by government agencies, non- governmental organizations, and villagers. Local perceptions of increased groundwater availability resulting from WHS infiltration, however, may produce changes in patterns of water use that shift the delivery of WHS benefits from the community to individuals. The development of policy to prevent this shift of benefits is difficult to achieve, because limited resources prohibit the widespread use of watershed assessment and monitoring tools needed to quantify the impact of any given WHS on groundwater storage. Therefore, it is essential that easily implemented assessment tools with low data needs are made available to support science-based policy making from the village to state level. This study uses a simple approach for estimating WHS contributions to subsurface infiltration in a small watershed (2.6km2) near the village of Salri, Madhya Pradesh. The infiltration is estimated using an analytical mass balance model for the WHS reservoir calibrated with water level observations. The reservoir water level was selected as calibration data because it can be monitored easily and inexpensively with community-based monitoring programs or remote sensing. Fluxes to the reservoir considered in the model are surface runoff, groundwater inflows and outflows, evaporation, and villager withdrawals. Surface runoff and villager withdrawals must be estimated from independent data sources, but in this case were found to be of minor relevance; the calibrated model suggests that most runoff contributions to the reservoir are lost through the dam overflow

Design of Friction Stir Spot Welding Tools by Using a Novel Thermal-Mechanical Approach.

Science.gov (United States)

Su, Zheng-Ming; Qiu, Qi-Hong; Lin, Pai-Chen

2016-08-09

A simple thermal-mechanical model for friction stir spot welding (FSSW) was developed to obtain similar weld performance for different weld tools. Use of the thermal-mechanical model and a combined approach enabled the design of weld tools for various sizes but similar qualities. Three weld tools for weld radii of 4, 5, and 6 mm were made to join 6061-T6 aluminum sheets. Performance evaluations of the three weld tools compared fracture behavior, microstructure, micro-hardness distribution, and welding temperature of welds in lap-shear specimens. For welds made by the three weld tools under identical processing conditions, failure loads were approximately proportional to tool size. Failure modes, microstructures, and micro-hardness distributions were similar. Welding temperatures correlated with frictional heat generation rate densities. Because the three weld tools sufficiently met all design objectives, the proposed approach is considered a simple and feasible guideline for preliminary tool design.

Simple machines

CERN Document Server

Graybill, George

2007-01-01

Just how simple are simple machines? With our ready-to-use resource, they are simple to teach and easy to learn! Chocked full of information and activities, we begin with a look at force, motion and work, and examples of simple machines in daily life are given. With this background, we move on to different kinds of simple machines including: Levers, Inclined Planes, Wedges, Screws, Pulleys, and Wheels and Axles. An exploration of some compound machines follows, such as the can opener. Our resource is a real time-saver as all the reading passages, student activities are provided. Presented in s

Magrit: a new thematic cartography tool

Science.gov (United States)

Viry, Matthieu; Giraud, Timothée; Lambert, Nicolas

2018-05-01

The article provides an overview of the features of the Magrit web application: a free online thematic mapping tool, presenting a strong pedagogical dimension and making possible to mobilize all the elements necessary for the realization of a thematic map. In this tool, several simple modes of representation are proposed such as proportional maps or choropleth maps. Other, more complex modes are also available such as smoothed maps and cartograms. Each map can be finalized thanks to layout and customization features (projection, scale, orientation, toponyms, etc.) and exported in vector format. Magrit is therefore a complete, light and versatile tool particularly adapted to cartography teaching at the university.

Overall feature of EAST operation space by using simple Core-SOL-Divertor model

International Nuclear Information System (INIS)

Hiwatari, R.; Hatayama, A.; Zhu, S.; Takizuka, T.; Tomita, Y.

2005-01-01

We have developed a simple Core-SOL-Divertor (C-S-D) model to investigate qualitatively the overall features of the operational space for the integrated core and edge plasma. To construct the simple C-S-D model, a simple core plasma model of ITER physics guidelines and a two-point SOL-divertor model are used. The simple C-S-D model is applied to the study of the EAST operational space with lower hybrid current drive experiments under various kinds of trade-off for the basic plasma parameters. Effective methods for extending the operation space are also presented. As shown by this study for the EAST operation space, it is evident that the C-S-D model is a useful tool to understand qualitatively the overall features of the plasma operation space. (author)

Development of a simple screening tool for opportunistic COPD case finding in primary care in Latin America: The PUMA study.

Science.gov (United States)

López Varela, Maria Victorina; Montes de Oca, Maria; Rey, Alejandra; Casas, Alejandro; Stirbulov, Roberto; Di Boscio, Valentina

2016-10-01

Opportunistic chronic obstructive pulmonary disease (COPD) case finding approaches for high-risk individuals with or without symptoms is a feasible option for disease identification. PUMA is an opportunistic case finding study conducted in primary care setting of Argentina, Colombia, Venezuela and Uruguay. The objectives were to measure COPD prevalence in an at-risk population visiting primary care for any reason, to assess the yield of this opportunistic approach and the accuracy of a score developed to detect COPD. Subjects attending routine primary care visits, ≥40 years of age, current or former smokers or exposed to biomass smoke, completed a questionnaire and performed spirometry. COPD was defined as post-bronchodilator (post-BD) forced expiratory volume in 1 s (FEV1 )/forced vital capacity (FVC) 50 years, heavy smokers (>30 pack-years), with dyspnoea, and having prior spirometry. A simple score and a weighted score constructed using the following predictive factors: gender, age, pack-years smoking, dyspnoea, sputum, cough and spirometry, had a mean accuracy for detecting COPD (post-BD FEV1 /FVC tool to select subjects for spirometry in primary care. © 2016 Asian Pacific Society of Respirology.

Scratch as a Computational Modelling Tool for Teaching Physics

Science.gov (United States)

Lopez, Victor; Hernandez, Maria Isabel

2015-01-01

The Scratch online authoring tool, which features a simple programming language that has been adapted to primary and secondary students, is being used more and more in schools as it offers students and teachers the opportunity to use a tool to build scientific models and evaluate their behaviour, just as can be done with computational modelling…

A simple geometrical model describing shapes of soap films suspended on two rings

Science.gov (United States)

Herrmann, Felix J.; Kilvington, Charles D.; Wildenberg, Rebekah L.; Camacho, Franco E.; Walecki, Wojciech J.; Walecki, Peter S.; Walecki, Eve S.

2016-09-01

We measured and analysed the stability of two types of soap films suspended on two rings using the simple conical frusta-based model, where we use common definition of conical frustum as a portion of a cone that lies between two parallel planes cutting it. Using frusta-based we reproduced very well-known results for catenoid surfaces with and without a central disk. We present for the first time a simple conical frusta based spreadsheet model of the soap surface. This very simple, elementary, geometrical model produces results surprisingly well matching the experimental data and known exact analytical solutions. The experiment and the spreadsheet model can be used as a powerful teaching tool for pre-calculus and geometry students.

User Manual for the PROTEUS Mesh Tools

Energy Technology Data Exchange (ETDEWEB)

Smith, Micheal A. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, Emily R [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-09-19

PROTEUS is built around a finite element representation of the geometry for visualization. In addition, the PROTEUS-SN solver was built to solve the even-parity transport equation on a finite element mesh provided as input. Similarly, PROTEUS-MOC and PROTEUS-NEMO were built to apply the method of characteristics on unstructured finite element meshes. Given the complexity of real world problems, experience has shown that using commercial mesh generator to create rather simple input geometries is overly complex and slow. As a consequence, significant effort has been put into place to create multiple codes that help assist in the mesh generation and manipulation. There are three input means to create a mesh in PROTEUS: UFMESH, GRID, and NEMESH. At present, the UFMESH is a simple way to generate two-dimensional Cartesian and hexagonal fuel assembly geometries. The UFmesh input allows for simple assembly mesh generation while the GRID input allows the generation of Cartesian, hexagonal, and regular triangular structured grid geometry options. The NEMESH is a way for the user to create their own mesh or convert another mesh file format into a PROTEUS input format. Given that one has an input mesh format acceptable for PROTEUS, we have constructed several tools which allow further mesh and geometry construction (i.e. mesh extrusion and merging). This report describes the various mesh tools that are provided with the PROTEUS code giving both descriptions of the input and output. In many cases the examples are provided with a regression test of the mesh tools. The most important mesh tools for any user to consider using are the MT_MeshToMesh.x and the MT_RadialLattice.x codes. The former allows the conversion between most mesh types handled by PROTEUS while the second allows the merging of multiple (assembly) meshes into a radial structured grid. Note that the mesh generation process is recursive in nature and that each input specific for a given mesh tool (such as .axial

OPTHYLIC: An Optimised Tool for Hybrid Limits Computation

Science.gov (United States)

Busato, Emmanuel; Calvet, David; Theveneaux-Pelzer, Timothée

2018-05-01

A software tool, computing observed and expected upper limits on Poissonian process rates using a hybrid frequentist-Bayesian CLs method, is presented. This tool can be used for simple counting experiments where only signal, background and observed yields are provided or for multi-bin experiments where binned distributions of discriminating variables are provided. It allows the combination of several channels and takes into account statistical and systematic uncertainties, as well as correlations of systematic uncertainties between channels. It has been validated against other software tools and analytical calculations, for several realistic cases.

Tool kit for staggered fermions

International Nuclear Information System (INIS)

Kilcup, G.W.; Sharpe, S.R.

1986-01-01

The symmetries of staggered fermions are analyzed both discrete and continuous. Tools are presented that allow a simple decomposition of representations of the continuum symmetries into representations of the discrete lattice symmetries, both at zero and non-zero spatial momenta. These tools are used to find the lattice transcriptions of the operators that appear in the weak interaction Hamiltonian. The lattice Ward Identities are derived that follow from the single partially conserved axial symmetry. Using these identities, the lattice equivalents of the continuum PCAC relations are found. Combining all these tools, Ward Identities are obtained, for the matrix elements of the weak interaction Hamiltonian, from which the behavior of the matrix elements as the pion and kaon masses vanish are derived. The same behavior as in the continuum is found

Communication tools in Canada

International Nuclear Information System (INIS)

Cowper, D.

1995-01-01

This document deals with the means and tools that are used for communicating with elected representatives. First, messages need to be simple, few in number and accurate. It is also advised to seek a first briefing because there is some information to be given, and not because some help is needed. On top of that, contacts should be made often enough to assure of a continued interest. (TEC)

The Simple Concurrent Online Processing System (SCOPS) - An open-source interface for remotely sensed data processing

Science.gov (United States)

Warren, M. A.; Goult, S.; Clewley, D.

2018-06-01

Advances in technology allow remotely sensed data to be acquired with increasingly higher spatial and spectral resolutions. These data may then be used to influence government decision making and solve a number of research and application driven questions. However, such large volumes of data can be difficult to handle on a single personal computer or on older machines with slower components. Often the software required to process data is varied and can be highly technical and too advanced for the novice user to fully understand. This paper describes an open-source tool, the Simple Concurrent Online Processing System (SCOPS), which forms part of an airborne hyperspectral data processing chain that allows users accessing the tool over a web interface to submit jobs and process data remotely. It is demonstrated using Natural Environment Research Council Airborne Research Facility (NERC-ARF) instruments together with other free- and open-source tools to take radiometrically corrected data from sensor geometry into geocorrected form and to generate simple or complex band ratio products. The final processed data products are acquired via an HTTP download. SCOPS can cut data processing times and introduce complex processing software to novice users by distributing jobs across a network using a simple to use web interface.

Development and validation of a new simple Healthy Meal Index for canteen meals

DEFF Research Database (Denmark)

Lassen, Anne Dahl; Biltoft-Jensen, Anja Pia; L Hansen, Gitte

2010-01-01

OBJECTIVE: Nutrition evaluation tools should be developed both for scientific purposes and to encourage and facilitate healthy nutritional practices. The purpose of the present study was to develop and validate a simple food-based Healthy Meal Index (HMI) reflecting the nutritional profile...... and potatoes. The development was built on the principles embodied by the Plate Model, but providing more specificity in some areas. The simple HMI was validated against weighed and chemically analysed food and nutrient content of a representative sample of canteen meals. The sample was split into four...

Study of Tools for Network Discovery and Network Mapping

Science.gov (United States)

2003-11-01

connected to the switch. iv. Accessibility of historical data and event data In general, network discovery tools keep a history of the collected...has the following software dependencies: - Java Virtual machine 76 - Perl modules - RRD Tool - TomCat - PostgreSQL STRENGTHS AND...systems - provide a simple view of the current network status - generate alarms on status change - generate history of status change VISUAL MAP

The Development of Student’s Activity Sheets (SAS) Based on Multiple Intelligences and Problem-Solving Skills Using Simple Science Tools

Science.gov (United States)

Wardani, D. S.; Kirana, T.; Ibrahim, M.

2018-01-01

The aim of this research is to produce SAS based on MI and problem-solving skills using simple science tools that are suitable to be used by elementary school students. The feasibility of SAS is evaluated based on its validity, practicality, and effectiveness. The completion Lesson Plan (LP) implementation and student’s activities are the indicators of SAS practicality. The effectiveness of SAS is measured by indicators of increased learning outcomes and problem-solving skills. The development of SAS follows the 4-D (define, design, develop, and disseminate) phase. However, this study was done until the third stage (develop). The written SAS was then validated through expert evaluation done by two experts of science, before its is tested to the target students. The try-out of SAS used one group with pre-test and post-test design. The result of this research shows that SAS is valid with “good” category. In addition, SAS is considered practical as seen from the increase of student activity at each meeting and LP implementation. Moreover, it was considered effective due to the significant difference between pre-test and post-test result of the learning outcomes and problem-solving skill test. Therefore, SAS is feasible to be used in learning.

Chemical Risk Assessment Screening Tool of a Global Chemical Company

OpenAIRE

Evelyn Tjoe-Nij; Christophe Rochin; Nathalie Berne; Alessandro Sassi; Antoine Leplay

2018-01-01

Background: This paper describes a simple-to-use and reliable screening tool called Critical Task Exposure Screening (CTES), developed by a chemical company. The tool assesses if the exposure to a chemical for a task is likely to be within acceptable levels. Methods: CTES is a Microsoft Excel tool, where the inhalation risk score is calculated by relating the exposure estimate to the corresponding occupational exposure limit (OEL) or occupational exposure band (OEB). The inhalation exposure i...

Brede Tools and Federating Online Neuroinformatics Databases

DEFF Research Database (Denmark)

Nielsen, Finn Årup

2014-01-01

As open science neuroinformatics databases the Brede Database and Brede Wiki seek to make distribution and federation of their content as easy and transparent as possible. The databases rely on simple formats and allow other online tools to reuse their content. This paper describes the possible i...

EZ and GOSSIP, two new VO compliant tools for spectral analysis

Science.gov (United States)

Franzetti, P.; Garill, B.; Fumana, M.; Paioro, L.; Scodeggio, M.; Paltani, S.; Scaramella, R.

2008-10-01

We present EZ and GOSSIP, two new VO compliant tools dedicated to spectral analysis. EZ is a tool to perform automatic redshift measurement; GOSSIP is a tool created to perform the SED fitting procedure in a simple, user friendly and efficient way. These two tools have been developed by the PANDORA Group at INAF-IASF (Milano); EZ has been developed in collaboration with Osservatorio Monte Porzio (Roma) and Integral Science Data Center (Geneve). EZ is released to the astronomical community; GOSSIP is currently in beta-testing.

Desktop publishing: a useful tool for scientists.

Science.gov (United States)

Lindroth, J R; Cooper, G; Kent, R L

1994-01-01

Desktop publishing offers features that are not available in word processing programs. The process yields an impressive and professional-looking document that is legible and attractive. It is a simple but effective tool to enhance the quality and appearance of your work and perhaps also increase your productivity.

Building Models in the Classroom: Taking Advantage of Sophisticated Geomorphic Numerical Tools Using a Simple Graphical User Interface

Science.gov (United States)

Roy, S. G.; Koons, P. O.; Gerbi, C. C.; Capps, D. K.; Tucker, G. E.; Rogers, Z. A.

2014-12-01

Sophisticated numerical tools exist for modeling geomorphic processes and linking them to tectonic and climatic systems, but they are often seen as inaccessible for users with an exploratory level of interest. We have improved the accessibility of landscape evolution models by producing a simple graphics user interface (GUI) that takes advantage of the Channel-Hillslope Integrated Landscape Development (CHILD) model. Model access is flexible: the user can edit values for basic geomorphic, tectonic, and climate parameters, or obtain greater control by defining the spatiotemporal distributions of those parameters. Users can make educated predictions by choosing their own parametric values for the governing equations and interpreting the results immediately through model graphics. This method of modeling allows users to iteratively build their understanding through experimentation. Use of this GUI is intended for inquiry and discovery-based learning activities. We discuss a number of examples of how the GUI can be used at the upper high school, introductory university, and advanced university level. Effective teaching modules initially focus on an inquiry-based example guided by the instructor. As students become familiar with the GUI and the CHILD model, the class can shift to more student-centered exploration and experimentation. To make model interpretations more robust, digital elevation models can be imported and direct comparisons can be made between CHILD model results and natural topography. The GUI is available online through the University of Maine's Earth and Climate Sciences website, through the Community Surface Dynamics Modeling System (CSDMS) model repository, or by contacting the corresponding author.

A Simple Evaluation Tool (ET-CET) Indicates Increase of Diagnostic Skills From Small Bowel Capsule Endoscopy Training Courses: A Prospective Observational European Multicenter Study.

Science.gov (United States)

Albert, J G; Humbla, O; McAlindon, M E; Davison, C; Seitz, U; Fraser, C; Hagenmüller, F; Noetzel, E; Spada, C; Riccioni, M E; Barnert, J; Filmann, N; Keuchel, M

2015-10-01

Small bowel capsule endoscopy (SBCE) has become a first line diagnostic tool. Several training courses with a similar format have been established in Europe; however, data on learning curve and training in SBCE remain sparse.Between 2008 and 2011, different basic SBCE training courses were organized internationally in UK (n = 2), Italy (n = 2), Germany (n = 2), Finland (n = 1), and nationally in Germany (n = 10), applying similar 8-hour curricula with 50% lectures and 50% hands-on training. The Given PillCam System was used in 12 courses, the Olympus EndoCapsule system in 5, respectively. A simple evaluation tool for capsule endoscopy training (ET-CET) was developed using 10 short SBCE videos including relevant lesions and normal or irrelevant findings. For each video, delegates were required to record a diagnosis (achievable total score from 0 to 10) and the clinical relevance (achievable total score 0 to 10). ET-CET was performed at baseline before the course and repeated, with videos in altered order, after the course.Two hundred ninety-four delegates (79.3% physicians, 16.3% nurses, 4.4% others) were included for baseline analysis, 268 completed the final evaluation. Forty percent had no previous experience in SBCE, 33% had performed 10 or less procedures. Median scores for correct diagnosis improved from 4.0 (IQR 3) to 7.0 (IQR 3) during the courses (P endoscopy may be useful before attending an SBCE course.

A Simple Model for Complex Fabrication of MEMS based Pressure Sensor: A Challenging Approach

Directory of Open Access Journals (Sweden)

Himani SHARMA

2010-08-01

Full Text Available In this paper we have presented the simple model for complex fabrication of MEMS based absolute micro pressure sensor. This kind of modeling is extremely useful for determining its complexity in fabrication steps and provides complete information about process sequence to be followed during manufacturing. Therefore, the need for test iteration decreases and cost, time can be reduced significantly. By using DevEdit tool (part of SILVACO tool, a behavioral model of pressure sensor have been presented and implemented.

Simple Kidney Cysts

Science.gov (United States)

... Solitary Kidney Your Kidneys & How They Work Simple Kidney Cysts What are simple kidney cysts? Simple kidney cysts are abnormal, fluid-filled ... that form in the kidneys. What are the kidneys and what do they do? The kidneys are ...

System for exchanging tools and end effectors on a robot

International Nuclear Information System (INIS)

Burry, D.B.; Williams, P.M.

1991-01-01

A system and method for exchanging tools and end effectors on a robot permits exchange during a programmed task. The exchange mechanism is located off the robot, thus reducing the mass of the robot arm and permitting smaller robots to perform designated tasks. A simple spring/collet mechanism mounted on the robot is used which permits the engagement and disengagement of the tool or end effector without the need for a rotational orientation of the tool to the end effector/collet interface. As the tool changing system is not located on the robot arm no umbilical cords are located on robot. 12 figures

Draught risk index tool for building energy simulations

DEFF Research Database (Denmark)

Vorre, Mette Havgaard; Jensen, Rasmus Lund; Nielsen, Peter V.

2014-01-01

Flow elements combined with a building energy simulation tool can be used to indicate areas and periods when there is a risk of draught in a room. The study tests this concept by making a tool for post-processing of data from building energy simulations. The objective is to show indications...... of draught risk during a whole year, giving building designers a tool for the design stage of a building. The tool uses simple one-at-a-time calculations of flow elements and assesses the uncertainty of the result by counting the number of overlapping flow elements. The calculation time is low, making...... it usable in the early design stage to optimise the building layout. The tool provides an overview of the general draught pattern over a period, e.g. a whole year, and of how often there is a draught risk....

Basic Research Tools for Earthworm Ecology

Directory of Open Access Journals (Sweden)

Kevin R. Butt

2010-01-01

Full Text Available Earthworms are responsible for soil development, recycling organic matter and form a vital component within many food webs. For these and other reasons earthworms are worthy of investigation. Many technologically-enhanced approaches have been used within earthworm-focused research. These have their place, may be a development of existing practices or bring techniques from other fields. Nevertheless, let us not overlook the fact that much can still be learned through utilisation of more basic approaches which have been used for some time. New does not always equate to better. Information on community composition within an area and specific population densities can be learned using simple collection techniques, and burrowing behaviour can be determined from pits, resin-insertion or simple mesocosms. Life history studies can be achieved through maintenance of relatively simple cultures. Behavioural observations can be undertaken by direct observation or with low cost webcam usage. Applied aspects of earthworm research can also be achieved through use of simple techniques to enhance population development and even population dynamics can be directly addressed with use of relatively inexpensive, effective marking techniques. This paper seeks to demonstrate that good quality research in this sphere can result from appropriate application of relatively simple research tools.

Basic Research Tools for Earthworm Ecology

International Nuclear Information System (INIS)

Butt, K.R.; Grigoropoulou, N.

2010-01-01

Earthworms are responsible for soil development, recycling organic matter and form a vital component within many food webs. For these and other reasons earthworms are worthy of investigation. Many technologically-enhanced approaches have been used within earthworm-focused research. These have their place, may be a development of existing practices or bring techniques from other fields. Nevertheless, let us not overlook the fact that much can still be learned through utilisation of more basic approaches which have been used for some time. New does not always equate to better. Information on community composition within an area and specific population densities can be learned using simple collection techniques, and burrowing behaviour can be determined from pits, resin-insertion or simple mesocosms. Life history studies can be achieved through maintenance of relatively simple cultures. Behavioural observations can be undertaken by direct observation or with low cost we became usage. Applied aspects of earthworm research can also be achieved through use of simple techniques to enhance population development and even population dynamics can be directly addressed with use of relatively inexpensive, effective marking techniques. This paper seeks to demonstrate that good quality research in this sphere can result from appropriate application of relatively simple research tools.

A Simulation Tool for the Conceptual Design of Thermonuclear Pulsors

International Nuclear Information System (INIS)

Ramos, R.; Gonzalez, J.; Clausse, A.

2003-01-01

We worked with an effective model that calculates the neutron production of Plasma Focus devices.From experimental data we obtained different fitting functions for the model lumped parameters.By this way, we obtained a simple tool for neutron yield calculation.This tool is very useful at a conceptual design stage, because it can predict easily if a given PF device would be suitable for a certain application

System level modelling with open source tools

DEFF Research Database (Denmark)

Jakobsen, Mikkel Koefoed; Madsen, Jan; Niaki, Seyed Hosein Attarzadeh

, called ForSyDe. ForSyDe is available under the open Source approach, which allows small and medium enterprises (SME) to get easy access to advanced modeling capabilities and tools. We give an introduction to the design methodology through the system level modeling of a simple industrial use case, and we...

Photo-identification as a simple tool for studying invasive lionfish Pterois volitans populations.

Science.gov (United States)

Chaves, L C T; Hall, J; Feitosa, J L L; Côté, I M

2016-02-01

Photo-tagging, i.e. using a specific software to match colour patterns on photographs, was tested as a means to identify individual Indo-Pacific Pterois volitans to assist with population and movement studies of this invasive species. The stripe pattern on the flank of adult P. volitans (n = 48) was the most individually distinctive of three body regions tested, leading to correct individual identification on 68 and 82% of tests with a single and two images of the reference individual, respectively. Photo-tagging is inexpensive, logistically simple and can involve citizen scientists, making it a viable alternative to traditional tagging to provide information on P. volitans distribution, movement patterns and recolonization rates after removals. © 2015 The Fisheries Society of the British Isles.

Validating a simple discharge planning tool following hospital admission for an isolated lower limb fracture.

Science.gov (United States)

Kimmel, Lara A; Holland, Anne E; Simpson, Pam M; Edwards, Elton R; Gabbe, Belinda J

2014-07-01

Early, accurate prediction of discharge destination from the acute hospital assists individual patients and the wider hospital system. The Trauma Rehabilitation and Prediction Tool (TRaPT), developed using registry data, determines probability of inpatient rehabilitation discharge for patients with isolated lower limb fractures. The aims of this study were: (1) to prospectively validatate the TRaPT, (2) to assess whether its performance could be improved by adding additional demographic data, and (3) to simplify it for use as a bedside tool. This was a cohort, measurement-focused study. Patients with isolated lower limb fractures (N=114) who were admitted to a major trauma center in Melbourne, Australia, were included. The participants' TRaPT scores were calculated from admission data. Performance of the TRaPT score alone, and in combination with frailty, weight-bearing status, and home supports, was assessed using measures of discrimination and calibration. A simplified TRaPT was developed by rounding the coefficients of variables in the original model and grouping age into 8 categories. Simplified TRaPT performance measures, including specificity, sensitivity, and positive and negative predictive values, were evaluated. Prospective validation of the TRaPT showed excellent discrimination (C-statistic=0.90 [95% confidence interval=0.82, 0.97]), a sensitivity of 80%, and specificity of 94%. All participants able to weight bear were discharged directly home. Simplified TRaPT scores had a sensitivity of 80% and a specificity of 88%. Generalizability may be limited given the compensation system that exists in Australia, but the methods used will assist in designing a similar tool in any population. The TRaPT accurately predicted discharge destination for 80% of patients and may form a useful aid for discharge decision making, with the simplified version facilitating its use as a bedside tool. © 2014 American Physical Therapy Association.

Is simple nephrectomy truly simple? Comparison with the radical alternative.

Science.gov (United States)

Connolly, S S; O'Brien, M Frank; Kunni, I M; Phelan, E; Conroy, R; Thornhill, J A; Grainger, R

2011-03-01

The Oxford English dictionary defines the term "simple" as "easily done" and "uncomplicated". We tested the validity of this terminology in relation to open nephrectomy surgery. Retrospective review of 215 patients undergoing open, simple (n = 89) or radical (n = 126) nephrectomy in a single university-affiliated institution between 1998 and 2002. Operative time (OT), estimated blood loss (EBL), operative complications (OC) and length of stay in hospital (LOS) were analysed. Statistical analysis employed Fisher's exact test and Stata Release 8.2. Simple nephrectomy was associated with shorter OT (mean 126 vs. 144 min; p = 0.002), reduced EBL (mean 729 vs. 859 cc; p = 0.472), lower OC (9 vs. 17%; 0.087), and more brief LOS (mean 6 vs. 8 days; p < 0.001). All parameters suggest favourable outcome for the simple nephrectomy group, supporting the use of this terminology. This implies "simple" nephrectomies are truly easier to perform with less complication than their radical counterpart.

A simple web-based tool to compare freshwater fish data collected using AFS standard methods

Science.gov (United States)

Bonar, Scott A.; Mercado-Silva, Norman; Rahr, Matt; Torrey, Yuta T.; Cate, Averill

2016-01-01

The American Fisheries Society (AFS) recently published Standard Methods for Sampling North American Freshwater Fishes. Enlisting the expertise of 284 scientists from 107 organizations throughout Canada, Mexico, and the United States, this text was developed to facilitate comparisons of fish data across regions or time. Here we describe a user-friendly web tool that automates among-sample comparisons in individual fish condition, population length-frequency distributions, and catch per unit effort (CPUE) data collected using AFS standard methods. Currently, the web tool (1) provides instantaneous summaries of almost 4,000 data sets of condition, length frequency, and CPUE of common freshwater fishes collected using standard gears in 43 states and provinces; (2) is easily appended with new standardized field data to update subsequent queries and summaries; (3) compares fish data from a particular water body with continent, ecoregion, and state data summaries; and (4) provides additional information about AFS standard fish sampling including benefits, ongoing validation studies, and opportunities to comment on specific methods. The web tool—programmed in a PHP-based Drupal framework—was supported by several AFS Sections, agencies, and universities and is freely available from the AFS website and fisheriesstandardsampling.org. With widespread use, the online tool could become an important resource for fisheries biologists.

Calculation Tool for Determining the Net Energy Gain

DEFF Research Database (Denmark)

Laustsen, Jacob Birck; Svendsen, Svend

2002-01-01

is dependent on both the U-values and the g-values. Beyond this it is dependent on the orientation of the windows and the climate and the actual period. This makes it difficult to choose the glazings and windows that are optimal with regard to energy performance in a given case. These facts have aroused a need...... for simple and accurate methods to determine and compare the energy performance of different window products. When choosing windows for new buildings or retrofitting a calculation tool that in a simple way determines the net energy gain from the specific windows in the actual building will ease the selection...... of the best window solution. Such a tool combined with a database with window products can make calculations of the heat loss or energy demand corresponding to the requirements in the new building code easier and more correct. In the paper, methods to determine energy performance data and the net energy gain...

a simple a simple excitation control excitation control excitation

African Journals Online (AJOL)

eobe

field voltages determined follow a simple quadratic relationship that offer a very simple control scheme, dependent on only the stator current. Keywords: saturated reactances, no-load field voltage, excitation control, synchronous generators. 1. Introduction. Introduction. Introduction. The commonest generator in use today is ...

Development of a core management tool for MYRRHA

International Nuclear Information System (INIS)

Jalůvka, David; Van den Eynde, Gert; Vandewalle, Stefan

2013-01-01

Highlights: • An in-core fuel management tool is being developed for the flexible irradiation machine MYRRHA. • Specific issues of the MYRRHA in-core fuel management are briefly discussed. • The tool addresses the loading pattern optimization problem. • Illustrative in-core fuel management optimization problems are solved using the tool. - Abstract: MYRRHA is an advanced multi-purpose irradiation facility under development at SCK• CEN in Mol, Belgium. In order to ensure an economical and safe operation of the reactor, an in-core fuel management tool is being developed within the project to address the loading pattern optimization problem. In the paper, the current version of the tool – its architecture and design, unique features, and the field of its application, are presented. In the second part of the paper, the tool’s capabilities are demonstrated on simple MYRRHA in-core fuel management optimization problems

Design and implementation of a web-based PET-CT reporting assessment and e-portfolio tool

International Nuclear Information System (INIS)

Subesinghe, M.; Goldstone, A.R.; Patel, C.N.; Chowdhury, F.U.; Scarsbrook, A.F.

2015-01-01

Highlights: • We describe a simple internet-based reporting tool to enhance PET-CT training. • Automatically created competency based metrics are valuable in monitoring progress. • This tool provides robust evidence of competency in PET-CT reporting

A modeling paradigm for interdisciplinary water resources modeling: Simple Script Wrappers (SSW)

Science.gov (United States)

Steward, David R.; Bulatewicz, Tom; Aistrup, Joseph A.; Andresen, Daniel; Bernard, Eric A.; Kulcsar, Laszlo; Peterson, Jeffrey M.; Staggenborg, Scott A.; Welch, Stephen M.

2014-05-01

Holistic understanding of a water resources system requires tools capable of model integration. This team has developed an adaptation of the OpenMI (Open Modelling Interface) that allows easy interactions across the data passed between models. Capabilities have been developed to allow programs written in common languages such as matlab, python and scilab to share their data with other programs and accept other program's data. We call this interface the Simple Script Wrapper (SSW). An implementation of SSW is shown that integrates groundwater, economic, and agricultural models in the High Plains region of Kansas. Output from these models illustrates the interdisciplinary discovery facilitated through use of SSW implemented models. Reference: Bulatewicz, T., A. Allen, J.M. Peterson, S. Staggenborg, S.M. Welch, and D.R. Steward, The Simple Script Wrapper for OpenMI: Enabling interdisciplinary modeling studies, Environmental Modelling & Software, 39, 283-294, 2013. http://dx.doi.org/10.1016/j.envsoft.2012.07.006 http://code.google.com/p/simple-script-wrapper/

Designing Tools for Supporting User Decision-Making in e-Commerce

Science.gov (United States)

Sutcliffe, Alistair; Al-Qaed, Faisal

The paper describes a set of tools designed to support a variety of user decision-making strategies. The tools are complemented by an online advisor so they can be adapted to different domains and users can be guided to adopt appropriate tools for different choices in e-commerce, e.g. purchasing high-value products, exploring product fit to users’ needs, or selecting products which satisfy requirements. The tools range from simple recommenders to decision support by interactive querying and comparison matrices. They were evaluated in a scenario-based experiment which varied the users’ task and motivation, with and without an advisor agent. The results show the tools and advisor were effective in supporting users and agreed with the predictions of ADM (adaptive decision making) theory, on which the design of the tools was based.

A numerical tool for reproducing driver behaviour: experiments and predictive simulations.

Science.gov (United States)

Casucci, M; Marchitto, M; Cacciabue, P C

2010-03-01

This paper presents the simulation tool called SDDRIVE (Simple Simulation of Driver performance), which is the numerical computerised implementation of the theoretical architecture describing Driver-Vehicle-Environment (DVE) interactions, contained in Cacciabue and Carsten [Cacciabue, P.C., Carsten, O. A simple model of driver behaviour to sustain design and safety assessment of automated systems in automotive environments, 2010]. Following a brief description of the basic algorithms that simulate the performance of drivers, the paper presents and discusses a set of experiments carried out in a Virtual Reality full scale simulator for validating the simulation. Then the predictive potentiality of the tool is shown by discussing two case studies of DVE interactions, performed in the presence of different driver attitudes in similar traffic conditions.

A simple nonlinear dynamical computing device

International Nuclear Information System (INIS)

Miliotis, Abraham; Murali, K.; Sinha, Sudeshna; Ditto, William L.; Spano, Mark L.

2009-01-01

We propose and characterize an iterated map whose nonlinearity has a simple (i.e., minimal) electronic implementation. We then demonstrate explicitly how all the different fundamental logic gates can be implemented and morphed using this nonlinearity. These gates provide the full set of gates necessary to construct a general-purpose, reconfigurable computing device. As an example of how such chaotic computing devices can be exploited, we use an array of these maps to encode data and to process information. Each map can store one of M items, where M is variable and can be large. This nonlinear hardware stores data naturally in different bases or alphabets. We also show how this method of storing information can serve as a preprocessing tool for exact or inexact pattern-matching searches.

An easy teaching tool for holography

International Nuclear Information System (INIS)

Voslion, T; Escarguel, A

2012-01-01

In the framework of scientific outreach at the Maison des Sciences of Aix-Marseilles University, we created a teaching kit for holography that can be packed into a small case. It includes all the equipment required to produce holograms almost anywhere and has a simple optical assembly and very good vibration tolerance. The fundamental principles of holography and several applications are illustrated through simple experiments: reflection Denisyuk holograms, angular multiplexing, notch filters, holographic interferometry and diffraction holographic gratings. It is possible to use this tool for several purposes: science outreach, teaching for undergraduate and graduate students and continuing education. In this paper, we explain the basis of holography, how the kit works and indicate some applications and results that can be performed and obtained with it. (paper)

Application of Item Response Theory to Modeling of Expanded Disability Status Scale in Multiple Sclerosis.

NARCIS (Netherlands)

Novakovic, A.M.; Krekels, E.H.; Munafo, A.; Ueckert, S.; Karlsson, M.O.

2016-01-01

In this study, we report the development of the first item response theory (IRT) model within a pharmacometrics framework to characterize the disease progression in multiple sclerosis (MS), as measured by Expanded Disability Status Score (EDSS). Data were collected quarterly from a 96-week phase III

Feasibility of using acoustic emission to determine in-process tool wear

Energy Technology Data Exchange (ETDEWEB)

Lazarus, L.J.

1996-04-01

Acoustic emission (AE) was evaluated for its ability to predict and recognize failure of cutting tools during machining processes when the cutting tool rotates and the workpiece is stationary. AE output was evaluated with a simple algorithm. AE was able to detect drill failure when the transducer was mounted on the workpiece holding fixture. Drill failure was recognized as size was reduced to 0.0003 in. diameter. The ability to predict failure was reduced with drill size, drill material elasticity, and tool coating. AE output for the turning process on a lathe was compared to turning tool insert wear. The turning tool must have sufficient wear to produce a detectable change in AE output to predict insert failure.

Simple countermeasures against the TM110-beam-blowup-mode in biperiodic structures

International Nuclear Information System (INIS)

Euteneuer, H.; Herminghaus, H.; Schoeler, H.

1984-01-01

The two fundamental methods of fighting beam blow-up in rf-accelerating-structures are staggered detuning and selective Q-spoiling of their higher order modes. Biperiodic structures offer a very simple way of applying the latter technique of the most dangerous TM 110 -like blowup mode at 1.7 times the accelerating frequency: letting this mode propagate but giving a large gap to the TM 110 -passband. This gap must be positive for electric coupling (f(phi=0) =1.7c. With asymmetric coupling elements between the cavities of a structure, one has a simple tool for staggered detuning: a change of the relative orientation of these elements spreads the resonance frequencies not only of the TM 110 -mode, but of at least all dipole modes. (orig.)

Improved Analysis of Earth System Models and Observations using Simple Climate Models

Science.gov (United States)

Nadiga, B. T.; Urban, N. M.

2016-12-01

Earth system models (ESM) are the most comprehensive tools we have to study climate change and develop climate projections. However, the computational infrastructure required and the cost incurred in running such ESMs precludes direct use of such models in conjunction with a wide variety of tools that can further our understanding of climate. Here we are referring to tools that range from dynamical systems tools that give insight into underlying flow structure and topology to tools that come from various applied mathematical and statistical techniques and are central to quantifying stability, sensitivity, uncertainty and predictability to machine learning tools that are now being rapidly developed or improved. Our approach to facilitate the use of such models is to analyze output of ESM experiments (cf. CMIP) using a range of simpler models that consider integral balances of important quantities such as mass and/or energy in a Bayesian framework.We highlight the use of this approach in the context of the uptake of heat by the world oceans in the ongoing global warming. Indeed, since in excess of 90% of the anomalous radiative forcing due greenhouse gas emissions is sequestered in the world oceans, the nature of ocean heat uptake crucially determines the surface warming that is realized (cf. climate sensitivity). Nevertheless, ESMs themselves are never run long enough to directly assess climate sensitivity. So, we consider a range of models based on integral balances--balances that have to be realized in all first-principles based models of the climate system including the most detailed state-of-the art climate simulations. The models range from simple models of energy balance to those that consider dynamically important ocean processes such as the conveyor-belt circulation (Meridional Overturning Circulation, MOC), North Atlantic Deep Water (NADW) formation, Antarctic Circumpolar Current (ACC) and eddy mixing. Results from Bayesian analysis of such models using

Machine learning plus optical flow: a simple and sensitive method to detect cardioactive drugs

Science.gov (United States)

Lee, Eugene K.; Kurokawa, Yosuke K.; Tu, Robin; George, Steven C.; Khine, Michelle

2015-07-01

Current preclinical screening methods do not adequately detect cardiotoxicity. Using human induced pluripotent stem cell-derived cardiomyocytes (iPS-CMs), more physiologically relevant preclinical or patient-specific screening to detect potential cardiotoxic effects of drug candidates may be possible. However, one of the persistent challenges for developing a high-throughput drug screening platform using iPS-CMs is the need to develop a simple and reliable method to measure key electrophysiological and contractile parameters. To address this need, we have developed a platform that combines machine learning paired with brightfield optical flow as a simple and robust tool that can automate the detection of cardiomyocyte drug effects. Using three cardioactive drugs of different mechanisms, including those with primarily electrophysiological effects, we demonstrate the general applicability of this screening method to detect subtle changes in cardiomyocyte contraction. Requiring only brightfield images of cardiomyocyte contractions, we detect changes in cardiomyocyte contraction comparable to - and even superior to - fluorescence readouts. This automated method serves as a widely applicable screening tool to characterize the effects of drugs on cardiomyocyte function.

Interactive exploratory data analysis tool in Alzheimer’s disease

Directory of Open Access Journals (Sweden)

Diana Furcila

2015-04-01

Thus, MorExAn provide us the possibility to relate histopathological data with neuropsychological and clinical variables. The aid of this interactive visualization tool brings us the possibility to find unexpected conclusions beyond the insight provided by simple statistics analysis, as well as to improve neuroscientists’ productivity.

Crossing simple resonances

International Nuclear Information System (INIS)

Collins, T.

1985-08-01

A simple criterion governs the beam distortion and/or loss of protons on a fast resonance crossing. Results from numerical integrations are illustrated for simple sextupole, octupole, and 10-pole resonances

Crossing simple resonances

Energy Technology Data Exchange (ETDEWEB)

Collins, T.

1985-08-01

A simple criterion governs the beam distortion and/or loss of protons on a fast resonance crossing. Results from numerical integrations are illustrated for simple sextupole, octupole, and 10-pole resonances.

Simple deterministic model of the hydraulic buffer effect in septic tanks

OpenAIRE

Forquet, N.; Dufresne, M.

2015-01-01

Septic tanks are widely used in on-site wastewater treatment systems. In addition to anaerobic pre-treatment, hydraulic buffering is one of the roles attributed to septic tanks. However there is still no tool for assessing it, especially in dynamic conditions. For gravity fed system, it could help both researchers and system designers. This technical note reports a simple mechanistic model based on the assumption of flow transition between the septic tank and the outflow pipe. The only parame...

Simple Genome Editing of Rodent Intact Embryos by Electroporation.

Directory of Open Access Journals (Sweden)

Takehito Kaneko

Full Text Available The clustered regularly interspaced short palindromic repeat (CRISPR/CRISPR-associated (Cas system is a powerful tool for genome editing in animals. Recently, new technology has been developed to genetically modify animals without using highly skilled techniques, such as pronuclear microinjection of endonucleases. Technique for animal knockout system by electroporation (TAKE method is a simple and effective technology that produces knockout rats by introducing endonuclease mRNAs into intact embryos using electroporation. Using TAKE method and CRISPR/Cas system, the present study successfully produced knockout and knock-in mice and rats. The mice and rats derived from embryos electroporated with Cas9 mRNA, gRNA and single-stranded oligodeoxynucleotide (ssODN comprised the edited targeted gene as a knockout (67% of mice and 88% of rats or knock-in (both 33%. The TAKE method could be widely used as a powerful tool to produce genetically modified animals by genome editing.

Cardiac implantable electronic device lead extraction using the lead-locking device system: keeping it simple, safe, and inexpensive with mechanical tools and local anesthesia.

Science.gov (United States)

Manolis, Antonis S; Georgiopoulos, Georgios; Metaxa, Sofia; Koulouris, Spyridon; Tsiachris, Dimitris

2017-10-01

We have previously reported our successful approach for percutaneous cardiac implantable electronic device (CIED) lead extraction using inexpensive tools, which we have continued over the years. Herein we report the results of the systematic use of a unique stylet, the lead-locking device (LLD), which securely locks the entire lead lumen, aided with non-powered telescoping sheaths in 54 patients to extract 98 CIED leads. This prospective observational clinical study included 38 men and 16 women aged 68.9±13.1 years undergoing lead extraction for device infection (n=46), lead malfunction (n=5), or prior to defibrillator implant (n=3). Leads were in place for 6.7±4.3 years. Infections were more commonly due to Staphylococcus species (n=40). There were 78 pacing (31 ventricular, 37 atrial, 4 VDD, and 6 coronary sinus leads) and 20 defibrillating leads. Using simple traction (6 leads) and the LLD stylets (92 leads) aided with telescoping sheaths (15 patients), 96 (98%) leads in 52 (96.3%) patients were successfully removed, with all but one leads removed using a subclavian approach; in 1 patient, the right femoral approach was also required. In 2 patients, distal fragments from one ventricular pacing and one defibrillating lead could not be removed. Finally, lead removal was completely (52/54) (96.3%) or partially (2/54) (3.7%) successful in 54 patients for 96 of 98 leads (98%) without major complications. Percutaneous lead extraction can be successful with mechanical tools using the LLD locking stylet aided with non-powered telescoping sheaths through a simplified, safe, and inexpensive procedure using local anesthesia.

SimpleITK Image-Analysis Notebooks: a Collaborative Environment for Education and Reproducible Research.

Science.gov (United States)

Yaniv, Ziv; Lowekamp, Bradley C; Johnson, Hans J; Beare, Richard

2018-06-01

Modern scientific endeavors increasingly require team collaborations to construct and interpret complex computational workflows. This work describes an image-analysis environment that supports the use of computational tools that facilitate reproducible research and support scientists with varying levels of software development skills. The Jupyter notebook web application is the basis of an environment that enables flexible, well-documented, and reproducible workflows via literate programming. Image-analysis software development is made accessible to scientists with varying levels of programming experience via the use of the SimpleITK toolkit, a simplified interface to the Insight Segmentation and Registration Toolkit. Additional features of the development environment include user friendly data sharing using online data repositories and a testing framework that facilitates code maintenance. SimpleITK provides a large number of examples illustrating educational and research-oriented image analysis workflows for free download from GitHub under an Apache 2.0 license: github.com/InsightSoftwareConsortium/SimpleITK-Notebooks .

Simple implementation of general dark energy models

International Nuclear Information System (INIS)

Bloomfield, Jolyon K.; Pearson, Jonathan A.

2014-01-01

We present a formalism for the numerical implementation of general theories of dark energy, combining the computational simplicity of the equation of state for perturbations approach with the generality of the effective field theory approach. An effective fluid description is employed, based on a general action describing single-scalar field models. The formalism is developed from first principles, and constructed keeping the goal of a simple implementation into CAMB in mind. Benefits of this approach include its straightforward implementation, the generality of the underlying theory, the fact that the evolved variables are physical quantities, and that model-independent phenomenological descriptions may be straightforwardly investigated. We hope this formulation will provide a powerful tool for the comparison of theoretical models of dark energy with observational data

Inequivalent topologies of chaos in simple equations

International Nuclear Information System (INIS)

Letellier, Christophe; Roulin, Elise; Roessler, Otto E.

2006-01-01

In the 1970, one of us introduced a few simple sets of ordinary differential equations as examples showing different types of chaos. Most of them are now more or less forgotten with the exception of the so-called Roessler system published in [Roessler OE. An equation for continuous chaos. Phys Lett A 1976;57(5):397-8]. In the present paper, we review most of the original systems and classify them using the tools of modern topological analysis, that is, using the templates and the bounding tori recently introduced by Tsankov and Gilmore in [Tsankov TD, Gilmore R. Strange attractors are classified by bounding tori. Phys Rev Lett 2003;91(13):134104]. Thus, examples of inequivalent topologies of chaotic attractors are provided in modern spirit

The biomechanics of simple steatosis and steatohepatitis

Science.gov (United States)

Parker, K. J.; Ormachea, J.; Drage, M. G.; Kim, H.; Hah, Z.

2018-05-01

Magnetic resonance and ultrasound elastography techniques are now important tools for staging high-grade fibrosis in patients with chronic liver disease. However, uncertainty remains about the effects of simple accumulation of fat (steatosis) and inflammation (steatohepatitis) on the parameters that can be measured using different elastographic techniques. To address this, we examine the rheological models that are capable of capturing the dominant viscoelastic behaviors associated with fat and inflammation in the liver, and quantify the resulting changes in shear wave speed and viscoelastic parameters. Theoretical results are shown to match measurements in phantoms and animal studies reported in the literature. These results are useful for better design of elastographic studies of fatty liver disease and steatohepatitis, potentially leading to improved diagnosis of these conditions.

Simple unification

International Nuclear Information System (INIS)

Ponce, W.A.; Zepeda, A.

1987-08-01

We present the results obtained from our systematic search of a simple Lie group that unifies weak and electromagnetic interactions in a single truly unified theory. We work with fractionally charged quarks, and allow for particles and antiparticles to belong to the same irreducible representation. We found that models based on SU(6), SU(7), SU(8) and SU(10) are viable candidates for simple unification. (author). 23 refs

“DRYPACK” - a calculation and analysis tool

DEFF Research Database (Denmark)

Andreasen, M.B.; Toftegaard, R.; Schneider, P.

2013-01-01

drying processes. Moreover, it is possible to change the configuration of the dryer by including/changing energy saving components to illustrate the potential of the new configuration. The calculation tool is demonstrated in four different case studies, where the actual energy consumption and possible......“DryPack” is a calculation tool that visualises the energy consumption of airbased and superheated steam drying processes. With “DryPack”, it is possible to add different components to a simple drying process, and thereby increase the flexibility, which makes it possible to analyse the most common...... energy consumption reductions by using “DryPack” are calculated. With the “DryPack” calculation tool, it is possible to calculate four different unit operations with moist air (dehumidification of air, humidification of air, mixing of two air streams, and heating of air). In addition, a Mollier diagram...

Physics validation of detector simulation tools for LHC

International Nuclear Information System (INIS)

Beringer, J.

2004-01-01

Extensive studies aimed at validating the physics processes built into the detector simulation tools Geant4 and Fluka are in progress within all Large Hardon Collider (LHC) experiments, within the collaborations developing these tools, and within the LHC Computing Grid (LCG) Simulation Physics Validation Project, which has become the primary forum for these activities. This work includes detailed comparisons with test beam data, as well as benchmark studies of simple geometries and materials with single incident particles of various energies for which experimental data is available. We give an overview of these validation activities with emphasis on the latest results

A risk assessment tool for contaminated sites in low-permeability fractured media

DEFF Research Database (Denmark)

Chambon, Julie Claire Claudia; Binning, Philip John; Jørgensen, Peter R.

2011-01-01

A risk assessment tool for contaminated sites in low-permeability fractured media is developed, based on simple transient and steady-state analytical solutions. The discrete fracture (DF) tool, which explicitly accounts for the transport along fractures, covers different source geometries...... and history (including secondary sources) and can be applied to a wide range of compounds. The tool successfully simulates published data from short duration column and field experiments. The use for risk assessment is illustrated by three typical risk assessment case studies, involving pesticides...

New Tools to Prepare ACE Cross-section Files for MCNP Analytic Test Problems

International Nuclear Information System (INIS)

Brown, Forrest B.

2016-01-01

Monte Carlo calculations using one-group cross sections, multigroup cross sections, or simple continuous energy cross sections are often used to: (1) verify production codes against known analytical solutions, (2) verify new methods and algorithms that do not involve detailed collision physics, (3) compare Monte Carlo calculation methods with deterministic methods, and (4) teach fundamentals to students. In this work we describe 2 new tools for preparing the ACE cross-section files to be used by MCNP ® for these analytic test problems, simple a ce.pl and simple a ce m g.pl.

Tools & training for more secure software

CERN Multimedia

CERN. Geneva

2017-01-01

Just by fate of nature, software today is shipped out as “beta”, coming with vulnerabilities and weaknesses, which should already have been fixed at the programming stage. This presentation will show the consequences of suboptimal software, why good programming, thorough software design, and a proper software development process is imperative for the overall security of the Organization, and how a few simple tools and training are supposed to make CERN software more secure.

The DAFNE databank as a simple tool for nutrition policy. DAta Food NEtworking.

Science.gov (United States)

Trichopoulou, A

2001-10-01

To identify, quantify and depict variation of food habits in Europe, using data from the DAFNE (DAta Food NEtworking) databank. Household budget survey data of 12 European countries, namely Belgium, Germany, Greece, Hungary, Ireland, Italy, Luxembourg, Norway, Poland, Portugal, Spain and the United Kingdom, around 1990. Data from the DAFNE databank are presented in simple pictorial presentations, which reveal considerable disparities in food habits. Furthermore, there appears to be nutritional variation within countries by socio-demographic groups, defined by their residence and educational level. The distribution patterns of food availability provide insights into the determinants of food preferences, as conditioned by current forces. The factors influencing consumer choice are many and varied. Thus, in order to promote healthy eating, it is essential to identify the food habits of the target population. In this context, information derived from household budget surveys, used in the development of the DAFNE databank, could be very important.

Using a Conflict Map as an Instructional Tool To Change Student Conceptions in Simple Series Electric-Circuits.

Science.gov (United States)

Tsai, Chin-Chung

2003-01-01

Examines the effects of using a conflict map on 8th grade students' conceptual change and ideational networks about simple series electric circuits. Analyzes student interview data through a flow map method. Shows that the use of conflict maps could help students construct greater, richer, and more integrated ideational networks about electric…

A simple model of hysteresis behavior using spreadsheet analysis

Science.gov (United States)

Ehrmann, A.; Blachowicz, T.

2015-01-01

Hysteresis loops occur in many scientific and technical problems, especially as field dependent magnetization of ferromagnetic materials, but also as stress-strain-curves of materials measured by tensile tests including thermal effects, liquid-solid phase transitions, in cell biology or economics. While several mathematical models exist which aim to calculate hysteresis energies and other parameters, here we offer a simple model for a general hysteretic system, showing different hysteresis loops depending on the defined parameters. The calculation which is based on basic spreadsheet analysis plus an easy macro code can be used by students to understand how these systems work and how the parameters influence the reactions of the system on an external field. Importantly, in the step-by-step mode, each change of the system state, compared to the last step, becomes visible. The simple program can be developed further by several changes and additions, enabling the building of a tool which is capable of answering real physical questions in the broad field of magnetism as well as in other scientific areas, in which similar hysteresis loops occur.

A simple model of hysteresis behavior using spreadsheet analysis

International Nuclear Information System (INIS)

Ehrmann, A; Blachowicz, T

2015-01-01

Hysteresis loops occur in many scientific and technical problems, especially as field dependent magnetization of ferromagnetic materials, but also as stress-strain-curves of materials measured by tensile tests including thermal effects, liquid-solid phase transitions, in cell biology or economics. While several mathematical models exist which aim to calculate hysteresis energies and other parameters, here we offer a simple model for a general hysteretic system, showing different hysteresis loops depending on the defined parameters. The calculation which is based on basic spreadsheet analysis plus an easy macro code can be used by students to understand how these systems work and how the parameters influence the reactions of the system on an external field. Importantly, in the step-by-step mode, each change of the system state, compared to the last step, becomes visible. The simple program can be developed further by several changes and additions, enabling the building of a tool which is capable of answering real physical questions in the broad field of magnetism as well as in other scientific areas, in which similar hysteresis loops occur

A defect-driven diagnostic method for machine tool spindles.

Science.gov (United States)

Vogl, Gregory W; Donmez, M Alkan

2015-01-01

Simple vibration-based metrics are, in many cases, insufficient to diagnose machine tool spindle condition. These metrics couple defect-based motion with spindle dynamics; diagnostics should be defect-driven. A new method and spindle condition estimation device (SCED) were developed to acquire data and to separate system dynamics from defect geometry. Based on this method, a spindle condition metric relying only on defect geometry is proposed. Application of the SCED on various milling and turning spindles shows that the new approach is robust for diagnosing the machine tool spindle condition.

CRISP. Simulation tool for fault detection and diagnostics in high-DG power networks

International Nuclear Information System (INIS)

Fontela, M.; Andrieu, C.; Raison, B.

2004-08-01

This document gives a description of a tool proposed for fault detection and diagnostics. The main principles of the functions of fault localization are described and detailed for a given MV network that will be used for the ICT experiment in Grenoble (experiment 3B). The aim of the tool is to create a technical, simple and realistic context for testing ICT dedicated to an electrical application. The tool gives the expected inputs and outputs contents of the various distributed ICT components when a fault occurs in a given MV network. So the requirements for the ICT components are given in term of expected data collected, analysed and transmitted. Several examples are given in order to illustrate the inputs/outputs in case of different faults. The tool includes a topology description which is a main aspect to develop in the future for managing the distribution network. Updating topology in real time will become necessary for fault diagnostic and protection, but also necessary for the various possible added applications (local market balance and local electrical power quality for instance). The tool gives a context and a simple view for the ICT components behaviours assuming an ideal response and transmission from them. The real characteristics and possible limitations for the ICT (information latency, congestion, security) will be established during the experiments from the same context described in the HTFD tool

A tool for early workstation design for small and medium enterprises evaluated in five cases

NARCIS (Netherlands)

Hallbeck, M.S.; Bosch, T.; Rhijn, J.W.van; Krause, F.; Looze, M.P.de; Vink, P.

2010-01-01

Five case studies on production line design were described to study the effect of an early design support tool. Based on these case studies, the simple, interactive, real-time, medium-fidelity, mixed-reality methodology was not only found to be a good early design stage evaluative tool for

Is primate tool use special? Chimpanzee and New Caledonian crow compared.

Science.gov (United States)

McGrew, W C

2013-11-19

The chimpanzee (Pan troglodytes) is well-known in both nature and captivity as an impressive maker and user of tools, but recently the New Caledonian crow (Corvus moneduloides) has been championed as being equivalent or superior to the ape in elementary technology. I systematically compare the two taxa, going beyond simple presence/absence scoring of tool-using and -making types, on four more precise aspects of material culture: (i) types of associative technology (tools used in combination); (ii) modes of tool making; (iii) modes of tool use; and (iv) functions of tool use. I emphasize tool use in nature, when performance is habitual or customary, rather than in anecdotal or idiosyncratic. On all four measures, the ape shows more variety than does the corvid, especially in modes and functions that go beyond extractive foraging. However, more sustained field research is required on the crows before this contrast is conclusive.

A simple tool for estimating city-wide annual electrical energy savings from cooler surfaces

Energy Technology Data Exchange (ETDEWEB)

Pomerantz, Melvin; Rosado, Pablo J.; Levinson, Ronnen

2015-12-01

We present a simple method to estimate the maximum possible electrical energy saving that might be achieved by increasing the albedo of surfaces in a large city. We restrict this to the “indirect effect”, the cooling of outside air that lessens the demand for air conditioning (AC). Given the power demand of the electric utilities and data about the city, we can use a single linear equation to estimate the maximum savings. For example, the result for an albedo change of 0.2 of pavements in a typical warm city in California, such as Sacramento, is that the saving is less than about 2 kWh per m2 per year. This may help decision makers choose which heat island mitigation techniques are economical from an energy-saving perspective.

Simple approach to study biomolecule adsorption in polymeric microfluidic channels

Energy Technology Data Exchange (ETDEWEB)

Gubala, Vladimir, E-mail: V.Gubala@kent.ac.uk [Biomedical Diagnostics Institute (BDI), National Centre for Sensor Research (NCSR), Dublin City University, Dublin 9 (Ireland); Medway School of Pharmacy, University of Kent, Central Avenue, Anson 120, Chatham Maritime, Kent ME4 4TB (United Kingdom); Siegrist, Jonathan; Monaghan, Ruairi; O' Reilly, Brian; Gandhiraman, Ram Prasad [Biomedical Diagnostics Institute (BDI), National Centre for Sensor Research (NCSR), Dublin City University, Dublin 9 (Ireland); Daniels, Stephen [Biomedical Diagnostics Institute (BDI), National Centre for Sensor Research (NCSR), Dublin City University, Dublin 9 (Ireland); National Centre for Plasma Science and Technology (NCPST), Dublin City University, Dublin 9 (Ireland); Williams, David E. [Biomedical Diagnostics Institute (BDI), National Centre for Sensor Research (NCSR), Dublin City University, Dublin 9 (Ireland); MacDiarmid Institute for Advanced Materials and Nanotechnology, School of Chemical Sciences, University of Auckland, Auckland 1142 (New Zealand); Ducree, Jens [Biomedical Diagnostics Institute (BDI), National Centre for Sensor Research (NCSR), Dublin City University, Dublin 9 (Ireland)

2013-01-14

Highlights: Black-Right-Pointing-Pointer A simple tool to assess biomolecule adsorption onto the surfaces of microchannels. Black-Right-Pointing-Pointer Development for dilution by surface-adsorption based depletion of protein samples. Black-Right-Pointing-Pointer It can easily be done using a readily available apparatus like a spin-coater. Black-Right-Pointing-Pointer The assessment tool is facile and quantitative. Black-Right-Pointing-Pointer Straightforward comparison of different surface chemistries. - Abstract: Herein a simple analytical method is presented for the characterization of biomolecule adsorption on cyclo olefin polymer (COP, trade name: Zeonor{sup Registered-Sign }) substrates which are widely used in microfluidic lab-on-a-chip devices. These Zeonor{sup Registered-Sign} substrates do not possess native functional groups for specific reactions with biomolecules. Therefore, depending on the application, such substrates must be functionalized by surface chemistry methods to either enhance or suppress biomolecular adsorption. This work demonstrates a microfluidic method for evaluating the adsorption of antibodies and oligonucleotides surfaces. The method uses centrifugal microfluidic flow-through chips and can easily be implemented using common equipment such as a spin coater. The working principle is very simple. The user adds 40 L of the solution containing the sample to the starting side of a microfluidic channel, where it is moved through by centrifugal force. Some molecules are adsorbed in the channel. The sample is then collected at the other end in a small reservoir and the biomolecule concentration is measured. As a pilot application, we characterized the adsorption of goat anti-human IgG and a 20-mer DNA on Zeonor{sup Registered-Sign }, and on three types of functionalized Zeonor: 3-aminopropyltriethoxysilane (APTES) modified surface with mainly positive charge, negatively charged surface with immobilized bovine serum albumin (BSA), and

Simple approach to study biomolecule adsorption in polymeric microfluidic channels

International Nuclear Information System (INIS)

Gubala, Vladimir; Siegrist, Jonathan; Monaghan, Ruairi; O’Reilly, Brian; Gandhiraman, Ram Prasad; Daniels, Stephen; Williams, David E.; Ducrée, Jens

2013-01-01

Highlights: ► A simple tool to assess biomolecule adsorption onto the surfaces of microchannels. ► Development for dilution by surface-adsorption based depletion of protein samples. ► It can easily be done using a readily available apparatus like a spin-coater. ► The assessment tool is facile and quantitative. ► Straightforward comparison of different surface chemistries. - Abstract: Herein a simple analytical method is presented for the characterization of biomolecule adsorption on cyclo olefin polymer (COP, trade name: Zeonor ® ) substrates which are widely used in microfluidic lab-on-a-chip devices. These Zeonor ® substrates do not possess native functional groups for specific reactions with biomolecules. Therefore, depending on the application, such substrates must be functionalized by surface chemistry methods to either enhance or suppress biomolecular adsorption. This work demonstrates a microfluidic method for evaluating the adsorption of antibodies and oligonucleotides surfaces. The method uses centrifugal microfluidic flow-through chips and can easily be implemented using common equipment such as a spin coater. The working principle is very simple. The user adds 40 L of the solution containing the sample to the starting side of a microfluidic channel, where it is moved through by centrifugal force. Some molecules are adsorbed in the channel. The sample is then collected at the other end in a small reservoir and the biomolecule concentration is measured. As a pilot application, we characterized the adsorption of goat anti-human IgG and a 20-mer DNA on Zeonor ® , and on three types of functionalized Zeonor: 3-aminopropyltriethoxysilane (APTES) modified surface with mainly positive charge, negatively charged surface with immobilized bovine serum albumin (BSA), and neutral, hydrogel-like film with polyethylene glycol (PEG) characteristics. This simple analytical approach adds to the fundamental understanding of the interaction forces in real

High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

Science.gov (United States)

Valls, I.; Hamasaiid, A.; Padré, A.

2017-09-01

available gas-quenching, whereas the other new grade enables a faster manufacturing of the tool at reduced cost by eliminating the time and money consuming high temperature hardening altogether. The latter newly developed grade can be hardened from a soft delivery state for easy machining to 52 HRc by way of a simple low temperature precipitation hardening. In this work, these new grades and the role of the tool material’s thermal, mechanical and tribological properties as well as their processing features will be discussed in light of enabling the manufacture of intelligent hot stamping tools.

VaRank: a simple and powerful tool for ranking genetic variants

Directory of Open Access Journals (Sweden)

Véronique Geoffroy

2015-03-01

Full Text Available Background. Most genetic disorders are caused by single nucleotide variations (SNVs or small insertion/deletions (indels. High throughput sequencing has broadened the catalogue of human variation, including common polymorphisms, rare variations or disease causing mutations. However, identifying one variation among hundreds or thousands of others is still a complex task for biologists, geneticists and clinicians.Results. We have developed VaRank, a command-line tool for the ranking of genetic variants detected by high-throughput sequencing. VaRank scores and prioritizes variants annotated either by Alamut Batch or SnpEff. A barcode allows users to quickly view the presence/absence of variants (with homozygote/heterozygote status in analyzed samples. VaRank supports the commonly used VCF input format for variants analysis thus allowing it to be easily integrated into NGS bioinformatics analysis pipelines. VaRank has been successfully applied to disease-gene identification as well as to molecular diagnostics setup for several hundred patients.Conclusions. VaRank is implemented in Tcl/Tk, a scripting language which is platform-independent but has been tested only on Unix environment. The source code is available under the GNU GPL, and together with sample data and detailed documentation can be downloaded from http://www.lbgi.fr/VaRank/.

Improvements in Spectrum's fit to program data tool.

Science.gov (United States)

Mahiane, Severin G; Marsh, Kimberly; Grantham, Kelsey; Crichlow, Shawna; Caceres, Karen; Stover, John

2017-04-01

The Joint United Nations Program on HIV/AIDS-supported Spectrum software package (Glastonbury, Connecticut, USA) is used by most countries worldwide to monitor the HIV epidemic. In Spectrum, HIV incidence trends among adults (aged 15-49 years) are derived by either fitting to seroprevalence surveillance and survey data or generating curves consistent with program and vital registration data, such as historical trends in the number of newly diagnosed infections or people living with HIV and AIDS related deaths. This article describes development and application of the fit to program data (FPD) tool in Joint United Nations Program on HIV/AIDS' 2016 estimates round. In the FPD tool, HIV incidence trends are described as a simple or double logistic function. Function parameters are estimated from historical program data on newly reported HIV cases, people living with HIV or AIDS-related deaths. Inputs can be adjusted for proportions undiagnosed or misclassified deaths. Maximum likelihood estimation or minimum chi-squared distance methods are used to identify the best fitting curve. Asymptotic properties of the estimators from these fits are used to estimate uncertainty. The FPD tool was used to fit incidence for 62 countries in 2016. Maximum likelihood and minimum chi-squared distance methods gave similar results. A double logistic curve adequately described observed trends in all but four countries where a simple logistic curve performed better. Robust HIV-related program and vital registration data are routinely available in many middle-income and high-income countries, whereas HIV seroprevalence surveillance and survey data may be scarce. In these countries, the FPD tool offers a simpler, improved approach to estimating HIV incidence trends.

Leveling a Simple Manufacturing Process Using Microsoft Project and Oracle Primavera

Directory of Open Access Journals (Sweden)

Ilie Margareta

2017-01-01

Full Text Available The present paper main objective is to put forward two software application tools: Microsoft Project 2013 and Oracle Primavera P6 Professional, used for the management process planning, especially for industrial projects. Second goals is to compare some feature of the two software and emphasize some aspects used for an easier use. The presentation and comparison considered four small processes with a total of 38 activities. The two software are used for the leveling of seven labor resources defined for the achievement of the activities. The results of the analyzes point out that even the two tools have the same purpose, Microsoft Project can be used for general simple to average processes’ complexity and size, Oracle Primavera has more specialized possibilities (libraries and specific project plans and more possibilities to model the actions needed for better leveling.

New tools for evaluating LQAS survey designs

OpenAIRE

Hund, Lauren

2014-01-01

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are pr...

The Predictive Accuracy of PREDICT : A Personalized Decision-Making Tool for Southeast Asian Women With Breast Cancer

NARCIS (Netherlands)

Wong, Hoong-Seam; Subramaniam, Shridevi; Alias, Zarifah; Taib, Nur Aishah; Ho, Gwo-Fuang; Ng, Char-Hong; Yip, Cheng-Har; Verkooijen, Helena M.; Hartman, Mikael; Bhoo Pathy, N

Web-based prognostication tools may provide a simple and economically feasible option to aid prognostication and selection of chemotherapy in early breast cancers. We validated PREDICT, a free online breast cancer prognostication and treatment benefit tool, in a resource-limited setting. All 1480

TFV as a strategic tool

DEFF Research Database (Denmark)

Bonke, Sten; Bertelsen, Sven

2011-01-01

The paper investigates the use of the Transformation-Flow-Value theory as a strategic tool in the development of the project production firm. When producing products such as ships, focus on value more than on cost may be the best approach, but in service industries such as construction, focus...... on flow may often be a far better approach than just looking at the costs. The paper presents a simple, general financial model to support this argument and not least to assist the reader in conducting similar analyses in his own company....

Laser safety tools and training

CERN Document Server

Barat, Ken

2008-01-01

Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase

Simple classical model for Fano statistics in radiation detectors

Energy Technology Data Exchange (ETDEWEB)

Jordan, David V. [Pacific Northwest National Laboratory, National Security Division - Radiological and Chemical Sciences Group PO Box 999, Richland, WA 99352 (United States)], E-mail: David.Jordan@pnl.gov; Renholds, Andrea S.; Jaffe, John E.; Anderson, Kevin K.; Rene Corrales, L.; Peurrung, Anthony J. [Pacific Northwest National Laboratory, National Security Division - Radiological and Chemical Sciences Group PO Box 999, Richland, WA 99352 (United States)

2008-02-01

A simple classical model that captures the essential statistics of energy partitioning processes involved in the creation of information carriers (ICs) in radiation detectors is presented. The model pictures IC formation from a fixed amount of deposited energy in terms of the statistically analogous process of successively sampling water from a large, finite-volume container ('bathtub') with a small dipping implement ('shot or whiskey glass'). The model exhibits sub-Poisson variance in the distribution of the number of ICs generated (the 'Fano effect'). Elementary statistical analysis of the model clarifies the role of energy conservation in producing the Fano effect and yields Fano's prescription for computing the relative variance of the IC number distribution in terms of the mean and variance of the underlying, single-IC energy distribution. The partitioning model is applied to the development of the impact ionization cascade in semiconductor radiation detectors. It is shown that, in tandem with simple assumptions regarding the distribution of energies required to create an (electron, hole) pair, the model yields an energy-independent Fano factor of 0.083, in accord with the lower end of the range of literature values reported for silicon and high-purity germanium. The utility of this simple picture as a diagnostic tool for guiding or constraining more detailed, 'microscopic' physical models of detector material response to ionizing radiation is discussed.

Bloom: A Relationship Visualization Tool for Complex Networks

Directory of Open Access Journals (Sweden)

Frank Horsfall

2010-07-01

Full Text Available Faced with an ever-increasing capacity to collect and store data, organizations must find a way to make sense of it to their advantage. Methods are required to simplify the data so that it can inform strategic decisions and help solve problems. Visualization tools are becoming increasingly popular since they can display complex relationships in a simple, visual format. This article describes Bloom, a project at Carleton University to develop an open source visualization tool for complex networks and business ecosystems. It provides an overview of the visualization technology used in the project and demonstrates its potential impact through a case study using real-world data.

Can we estimate the cellular phone RF peak output power with a simple experiment?

Science.gov (United States)

Fioreze, Maycon; dos Santos Junior, Sauli; Goncalves Hönnicke, Marcelo

2016-07-01

Cellular phones are becoming increasingly useful tools for students. Since cell phones operate in the microwave bandwidth, they can be used to motivate students to demonstrate and better understand the properties of electromagnetic waves. However, since these waves operate at higher frequencies (L-band, from 800 MHz to 2 GHz) it is not simple to detect them. Usually, expensive real-time high frequency oscilloscopes are required. Indirect measurements are also possible through heat-based and diode-detector-based radio-frequency (RF) power sensors. Another didactic and intuitive way is to explore a simple and inexpensive detection system, based on the interference effect caused in the electronic circuit of TV and PC soundspeakers, and to try to investigate different properties of the cell phones’ RF electromagnetic waves, such as its power and modulated frequency. This manuscript proposes a trial to quantify these measurements, based on a simple Friis equation model and the time constant of the circuit used in the detection system, in order to show it didactically to the students and even allow them also to explore such a simple detection system at home.

Can we estimate the cellular phone RF peak output power with a simple experiment?

International Nuclear Information System (INIS)

Fioreze, Maycon; Hönnicke, Marcelo Goncalves; Dos Santos Junior, Sauli

2016-01-01

Cellular phones are becoming increasingly useful tools for students. Since cell phones operate in the microwave bandwidth, they can be used to motivate students to demonstrate and better understand the properties of electromagnetic waves. However, since these waves operate at higher frequencies (L-band, from 800 MHz to 2 GHz) it is not simple to detect them. Usually, expensive real-time high frequency oscilloscopes are required. Indirect measurements are also possible through heat-based and diode-detector-based radio-frequency (RF) power sensors. Another didactic and intuitive way is to explore a simple and inexpensive detection system, based on the interference effect caused in the electronic circuit of TV and PC soundspeakers, and to try to investigate different properties of the cell phones’ RF electromagnetic waves, such as its power and modulated frequency. This manuscript proposes a trial to quantify these measurements, based on a simple Friis equation model and the time constant of the circuit used in the detection system, in order to show it didactically to the students and even allow them also to explore such a simple detection system at home. (paper)

Investigation of tool engagement and cutting performance in machining a pocket

Science.gov (United States)

Adesta, E. Y. T.; Hamidon, R.; Riza, M.; Alrashidi, R. F. F. A.; Alazemi, A. F. F. S.

2018-01-01

This study investigates the variation of tool engagement for different profile of cutting. In addition, behavior of cutting force and cutting temperature for different tool engagements for machining a pocket also been explored. Initially, simple tool engagement models were developed for peripheral and slot cutting for different types of corner. Based on these models, the tool engagements for contour and zig zag tool path strategies for a rectangular shape pocket with dimension 80 mm x 60 mm were analyzed. Experiments were conducted to investigate the effect of tool engagements on cutting force and cutting temperature for the machining of a pocket of AISI H13 material. The cutting parameters used were 150m/min cutting speed, 0.05mm/tooth feed, and 0.1mm depth of cut. Based on the results obtained, the changes of cutting force and cutting temperature performance there exist a relationship between cutting force, cutting temperature and tool engagement. A higher cutting force and cutting temperature is obtained when the cutting tool goes through up milling and when the cutting tool makes a full engagement with the workpiece.

Terminology tools: state of the art and practical lessons.

Science.gov (United States)

Cimino, J J

2001-01-01

As controlled medical terminologies evolve from simple code-name-hierarchy arrangements, into rich, knowledge-based ontologies of medical concepts, increased demands are placed on both the developers and users of the terminologies. In response, researchers have begun developing tools to address their needs. The aims of this article are to review previous work done to develop these tools and then to describe work done at Columbia University and New York Presbyterian Hospital (NYPH). Researchers working with the Systematized Nomenclature of Medicine (SNOMED), the Unified Medical Language System (UMLS), and NYPH's Medical Entities Dictionary (MED) have created a wide variety of terminology browsers, editors and servers to facilitate creation, maintenance and use of these terminologies. Although much work has been done, no generally available tools have yet emerged. Consensus on requirement for tool functions, especially terminology servers is emerging. Tools at NYPH have been used successfully to support the integration of clinical applications and the merger of health care institutions. Significant advancement has occurred over the past fifteen years in the development of sophisticated controlled terminologies and the tools to support them. The tool set at NYPH provides a case study to demonstrate one feasible architecture.

Simple genomes, complex interactions: Epistasis in RNA virus

Science.gov (United States)

Elena, Santiago F.; Solé, Ricard V.; Sardanyés, Josep

2010-06-01

Owed to their reduced size and low number of proteins encoded, RNA viruses and other subviral pathogens are often considered as being genetically too simple. However, this structural simplicity also creates the necessity for viral RNA sequences to encode for more than one protein and for proteins to carry out multiple functions, all together resulting in complex patterns of genetic interactions. In this work we will first review the experimental studies revealing that the architecture of viral genomes is dominated by antagonistic interactions among loci. Second, we will also review mathematical models and provide a description of computational tools for the study of RNA virus dynamics and evolution. As an application of these tools, we will finish this review article by analyzing a stochastic bit-string model of in silico virus replication. This model analyzes the interplay between epistasis and the mode of replication on determining the population load of deleterious mutations. The model suggests that, for a given mutation rate, the deleterious mutational load is always larger when epistasis is predominantly antagonistic than when synergism is the rule. However, the magnitude of this effect is larger if replication occurs geometrically than if it proceeds linearly.

Simple real-time computerized tasks for detection of malingering among murderers with schizophrenia.

Science.gov (United States)

Kertzman, Semion; Grinspan, Haim; Birger, Moshe; Shliapnikov, Nina; Alish, Yakov; Ben Nahum, Zeev; Mester, Roberto; Kotler, Moshe

2006-01-01

It is our contention that computer-based two-alternative forced choice techniques can be useful tools for the detection of patients with schizophrenia who feign acute psychotic symptoms and cognitive impairment as opposed to patients with schizophrenia with a true active psychosis. In our experiment, Visual Simple and Choice Reaction Time tasks were used. Reaction time in milliseconds was recorded and accuracy rate was obtained for all subjects' responses. Both types of task were administered to 27 patients with schizophrenia suspected of having committed murder. Patients with schizophrenia who were clinically assessed as malingerers achieved significantly fewer correct results, were significantly slower and less consistent in their reaction time. Congruence of performance between the Simple and Choice tasks was an additional parameter for the accurate diagnosis of malingering. The four parameters of both tests (accuracy of response, reaction time, standard deviation of reaction time and task congruency) are simple and constitute a user-friendly means for the detection of malingering in forensic practice. Another advantage of this procedure is that the software automatically measures and evaluates all the parameters.

Simple sequence repeat marker loci discovery using SSR primer.

Science.gov (United States)

Robinson, Andrew J; Love, Christopher G; Batley, Jacqueline; Barker, Gary; Edwards, David

2004-06-12

Simple sequence repeats (SSRs) have become important molecular markers for a broad range of applications, such as genome mapping and characterization, phenotype mapping, marker assisted selection of crop plants and a range of molecular ecology and diversity studies. With the increase in the availability of DNA sequence information, an automated process to identify and design PCR primers for amplification of SSR loci would be a useful tool in plant breeding programs. We report an application that integrates SPUTNIK, an SSR repeat finder, with Primer3, a PCR primer design program, into one pipeline tool, SSR Primer. On submission of multiple FASTA formatted sequences, the script screens each sequence for SSRs using SPUTNIK. The results are parsed to Primer3 for locus-specific primer design. The script makes use of a Web-based interface, enabling remote use. This program has been written in PERL and is freely available for non-commercial users by request from the authors. The Web-based version may be accessed at http://hornbill.cspp.latrobe.edu.au/

User guide – COE Calculation Tool for Wave Energy Converters

DEFF Research Database (Denmark)

Chozas, Julia Fernandez; Kofoed, Jens Peter; Jensen, Niels Ejner Helstrup

Aalborg University together with Energinet.dk and Julia F. Chozas Consulting Engineer, have released a freely available online spreadsheet to evaluate the Levelised Cost of Energy (LCOE) for wave energy projects. The open-access tool calculates the LCOE based on the power production of a Wave...... Energy Converter (WEC) at a particular location. Production data may derive from laboratory testing, numerical modelling or from sea trials. The tool has been developed as a transparent and simple model that evaluates WEC’s economic feasibility in a range of locations, while scaling WEC’s features...

Applying open source data visualization tools to standard based medical data.

Science.gov (United States)

Kopanitsa, Georgy; Taranik, Maxim

2014-01-01

Presentation of medical data in personal health records (PHRs) requires flexible platform independent tools to ensure easy access to the information. Different backgrounds of the patients, especially elder people require simple graphical presentation of the data. Data in PHRs can be collected from heterogeneous sources. Application of standard based medical data allows development of generic visualization methods. Focusing on the deployment of Open Source Tools, in this paper we applied Java Script libraries to create data presentations for standard based medical data.

Think Stoma Nurse: a tool to trigger referral to specialist care.

Science.gov (United States)

Hanley, Judy; Adams, Jane

This article describes the initial development and subsequent evolution of a simple referral assessment tool for stoma care. The first author's personal experience identified that there was widespread inconsistency in perceptions of local multidisciplinary teams as to when it was appropriate to refer to specific specialist nursing teams. This resulted in both inappropriate and delayed referrals. A 'Think Specialist Nurse' initiative was developed across the author's trust, building on the traffic light template from the 'ThinkGlucose' tool, to facilitate referrals to clinical nurse specialists. The stoma-care specific tool, 'Think Stoma Nurse', has subsequently evolved beyond its initial audience, and has been adapted into materials aimed at patients and carers.

Twelve essential tools for living the life of whole person health care.

Science.gov (United States)

Schlitz, Marilyn; Valentina, Elizabeth

2013-01-01

The integration of body, mind, and spirit has become a key dimension of health education and disease prevention and treatment; however, our health care system remains primarily disease centered. Finding simple steps to help each of us find our own balance can improve our lives, our work, and our relationships. On the basis of interviews with health care experts at the leading edge of the new model of medicine, this article identifies simple tools to improve the health of patients and caregivers.

OMIRIS educational tool

International Nuclear Information System (INIS)

Dumont, X.; Artus, J.C.; Gonin, M.; Bidard, F.; Hickman, B.

2004-01-01

The biological effects of ionizing radiations are one of the most important issues for workers exposed to these radiations in nuclear plants. To deliver information to workers about this topic, the 'Utility Medical Work Officers' wanted an educational tool. This tool named 'OMIRIS' was prepared under the authority of the federation of professors in radiology, radiobiology and radioprotection and the industrial nuclear partners in France (ANDRA, AREVA/COGEMA and FRAMATOME-ANP, CEA and EDF). The use of animation techniques helps to present in a simple way this complex topic using an interactive, pleasant and comprehensible form. Detailed information is given about 5 themes: 1) the various sources of ionizing radiation whatever they are natural, medical, industrial or military; 2) the various types of exposure, whether internal or external, their characteristics: duration, target organs and radiological toxicity and the different means of protection; 3) the concept of dose, the importance of dose rate and the reference values of doses; 4) the biological effects on the human organism, notions of dose threshold and aims, results and limitations of epidemiological surveys; and 5) the regulation based on radiological protection studies

Systematic Analysis of Quantitative Logic Model Ensembles Predicts Drug Combination Effects on Cell Signaling Networks

Science.gov (United States)

2016-08-27

bovine serum albumin (BSA) diluted to the amount corresponding to that in the media of the stimulated cells. Phospho-JNK comprises two isoforms whose...information accompanies this paper on the CPT: Pharmacometrics & Systems Pharmacology website (http://www.wileyonlinelibrary.com/psp4) Systematic Analysis of Quantitative Logic Model Morris et al. 553 www.wileyonlinelibrary/psp4

COPD assessment test (CAT): simple tool for evaluating quality of life of chemical warfare patients with chronic obstructive pulmonary disease.

Science.gov (United States)

Lari, Shahrzad M; Ghobadi, Hassan; Attaran, Davood; Mahmoodpour, Afsoun; Shadkam, Omid; Rostami, Maryam

2014-01-01

Chronic obstructive pulmonary disease (COPD) is one of the serious late pulmonary complications caused by sulphur mustard exposure. Health status evaluations of chemical warfare patients with COPD are important to the management of these patients. The aim of this study was to determine the efficacy of the COPD assessment test (CAT) in evaluating the health-related quality of life (HRQOL) of chemical warfare patients with COPD. Eighty-two consecutive patients with stable COPD were enrolled in this study. All subjects were visited by one physician, and the HRQOL was evaluated by the CAT and St. George Respiratory Questionnaires (SGRQs). In addition, a standard spirometry test, 6-min walk distance test and pulse oxymetry were conducted. The severity of the COPD was determined using Global Initiative for Chronic Obstructive Lung Disease (GOLD) staging and the body mass index, obstruction, dyspnoea and exercise (BODE) index. The mean age of the patients was 47.30 ± 7.08 years. The mean CAT score was 26.03 ± 8.28. Thirty-five (43%) patients were in CAT stage 3. There were statistically significant correlations between the CAT and the SGRQ (r = 0.70, P = 0.001) and the BODE index (r = 0.70, P = 0.001). A statistically significant inverse correlation was found between the CAT score and the forced expiratory volume in 1 s (r = -0.30, P = 0.03). Our results demonstrated that the CAT is a simple and valid tool for assessment of HRQOL in chemical warfare patients with COPD and can be used in clinical practice. © 2013 John Wiley & Sons Ltd.

Uniting Evidence-Based Evaluation with the ACGME Plastic Surgery Milestones: A Simple and Reliable Assessment of Resident Operative Performance.

Science.gov (United States)

Kobraei, Edward M; Bohnen, Jordan D; George, Brian C; Mullen, John T; Lillemoe, Keith D; Austen, William G; Liao, Eric C

2016-08-01

Milestones evaluations in plastic surgery reflect a shift toward competency-based training but have created a number of challenges. The authors have incorporated the smartphone application evaluation tool, System for Improving and Measuring Procedural Learning (SIMPL), that was recently developed by a multi-institutional research collaborative. In this pilot study, the authors hypothesize that SIMPL can improve resident evaluation and also collect granular performance data to simplify compliance with the plastic surgery Milestones. SIMPL was prospectively piloted with a plastic surgery resident and faculty surgeon at Massachusetts General Hospital in this institutional review board-approved study. The study period was a 2-month interval corresponding to the resident's rotation. The resident-faculty combination performed 20 cases together. All cases were evaluated with SIMPL. SIMPL evaluations uniformly took under 1 minute to submit. The average time to completed evaluation from surgery completion was 5 hours (technology will support a shared vocabulary between residents and faculty to enhance intraoperative education.

Validity of a simple Internet-based outcome-prediction tool in patients with total hip replacement: a pilot study.

Science.gov (United States)

Stöckli, Cornel; Theiler, Robert; Sidelnikov, Eduard; Balsiger, Maria; Ferrari, Stephen M; Buchzig, Beatus; Uehlinger, Kurt; Riniker, Christoph; Bischoff-Ferrari, Heike A

2014-04-01

We developed a user-friendly Internet-based tool for patients undergoing total hip replacement (THR) due to osteoarthritis to predict their pain and function after surgery. In the first step, the key questions were identified by statistical modelling in a data set of 375 patients undergoing THR. Based on multiple regression, we identified the two most predictive WOMAC questions for pain and the three most predictive WOMAC questions for functional outcome, while controlling for comorbidity, body mass index, age, gender and specific comorbidities relevant to the outcome. In the second step, a pilot study was performed to validate the resulting tool against the full WOMAC questionnaire among 108 patients undergoing THR. The mean difference between observed (WOMAC) and model-predicted value was -1.1 points (95% confidence interval, CI -3.8, 1.5) for pain and -2.5 points (95% CI -5.3, 0.3) for function. The model-predicted value was within 20% of the observed value in 48% of cases for pain and in 57% of cases for function. The tool demonstrated moderate validity, but performed weakly for patients with extreme levels of pain and extreme functional limitations at 3 months post surgery. This may have been partly due to early complications after surgery. However, the outcome-prediction tool may be useful in helping patients to become better informed about the realistic outcome of their THR.

Simple Design Tool for Development of Well Insulated Window Frames and Optimization of the Frame Geometry

DEFF Research Database (Denmark)

Zajas, Jan Jakub; Heiselberg, Per

2012-01-01

in order to approach an optimal solution. The program was also used to conduct an optimization process of the frame geometry. A large number of various window frame designs were created and evaluated, based on their insulation properties. The paper presents the investigation process and some of the best......This paper describes a design tool created with the purpose of designing highly insulated window frames. The design tool is based on a parametric model of the frame geometry, where various parameters describing the frame can be easily changed by the user. Based on this input, geometry of the frame...... is generated by the program and is used by the finite element simulator to calculate the thermal performance of the frame (the U value). After the initial design is evaluated, the user can quickly modify chosen parameters and generate a new design. This process can then be repeated in multiple iterations...

Criticality safety validation: Simple geometry, single unit 233U systems

International Nuclear Information System (INIS)

Putman, V.L.

1997-06-01

Typically used LMITCO criticality safety computational methods are evaluated for suitability when applied to INEEL 233 U systems which reasonably can be modeled as simple-geometry, single-unit systems. Sixty-seven critical experiments of uranium highly enriched in 233 U, including 57 aqueous solution, thermal-energy systems and 10 metal, fast-energy systems, were modeled. These experiments include 41 cylindrical and 26 spherical cores, and 41 reflected and 26 unreflected systems. No experiments were found for intermediate-neutron-energy ranges, or with interstitial non-hydrogenous materials typical of waste systems, mixed 233 U and plutonium, or reflectors such as steel, lead, or concrete. No simple geometry experiments were found with cubic or annular cores, or approximating infinite sea systems. Calculations were performed with various tools and methodologies. Nine cross-section libraries, based on ENDF/B-IV, -V, or -VI.2, or on Hansen-Roach source data, were used with cross-section processing methods of MCNP or SCALE. The k eff calculations were performed with neutral-particle transport and Monte Carlo methods of criticality codes DANT, MCNP 4A, and KENO Va

An intelligent tool for activity data collection.

Science.gov (United States)

Sarkar, A M Jehad

2011-01-01

Activity recognition systems using simple and ubiquitous sensors require a large variety of real-world sensor data for not only evaluating their performance but also training the systems for better functioning. However, a tremendous amount of effort is required to setup an environment for collecting such data. For example, expertise and resources are needed to design and install the sensors, controllers, network components, and middleware just to perform basic data collections. It is therefore desirable to have a data collection method that is inexpensive, flexible, user-friendly, and capable of providing large and diverse activity datasets. In this paper, we propose an intelligent activity data collection tool which has the ability to provide such datasets inexpensively without physically deploying the testbeds. It can be used as an inexpensive and alternative technique to collect human activity data. The tool provides a set of web interfaces to create a web-based activity data collection environment. It also provides a web-based experience sampling tool to take the user's activity input. The tool generates an activity log using its activity knowledge and the user-given inputs. The activity knowledge is mined from the web. We have performed two experiments to validate the tool's performance in producing reliable datasets.

Simple arithmetic: not so simple for highly math anxious individuals.

Science.gov (United States)

Chang, Hyesang; Sprute, Lisa; Maloney, Erin A; Beilock, Sian L; Berman, Marc G

2017-12-01

Fluency with simple arithmetic, typically achieved in early elementary school, is thought to be one of the building blocks of mathematical competence. Behavioral studies with adults indicate that math anxiety (feelings of tension or apprehension about math) is associated with poor performance on cognitively demanding math problems. However, it remains unclear whether there are fundamental differences in how high and low math anxious individuals approach overlearned simple arithmetic problems that are less reliant on cognitive control. The current study used functional magnetic resonance imaging to examine the neural correlates of simple arithmetic performance across high and low math anxious individuals. We implemented a partial least squares analysis, a data-driven, multivariate analysis method to measure distributed patterns of whole-brain activity associated with performance. Despite overall high simple arithmetic performance across high and low math anxious individuals, performance was differentially dependent on the fronto-parietal attentional network as a function of math anxiety. Specifically, low-compared to high-math anxious individuals perform better when they activate this network less-a potential indication of more automatic problem-solving. These findings suggest that low and high math anxious individuals approach even the most fundamental math problems differently. © The Author (2017). Published by Oxford University Press.

Free and simple GIS as appropriate for health mapping in a low resource setting: a case study in eastern Indonesia.

Science.gov (United States)

Fisher, Rohan P; Myers, Bronwyn A

2011-02-25

Despite the demonstrated utility of GIS for health applications, there are perceived problems in low resource settings: GIS software can be expensive and complex; input data are often of low quality. This study aimed to test the appropriateness of new, inexpensive and simple GIS tools in poorly resourced areas of a developing country. GIS applications were trialled in pilot studies based on mapping of health resources and health indicators at the clinic and district level in the predominantly rural province of Nusa Tenggara Timur in eastern Indonesia. The pilot applications were (i) rapid field collection of health infrastructure data using a GPS enabled PDA, (ii) mapping health indicator data using open source GIS software, and (iii) service availability mapping using a free modelling tool. Through contextualised training, district and clinic staff acquired skills in spatial analysis and visualisation and, six months after the pilot studies, they were using these skills for advocacy in the planning process, to inform the allocation of some health resources, and to evaluate some public health initiatives. We demonstrated that GIS can be a useful and inexpensive tool for the decentralisation of health data analysis to low resource settings through the use of free and simple software, locally relevant training materials and by providing data collection tools to ensure data reliability.

Video analysis of projectile motion using tablet computers as experimental tools

Science.gov (United States)

Klein, P.; Gröber, S.; Kuhn, J.; Müller, A.

2014-01-01

Tablet computers were used as experimental tools to record and analyse the motion of a ball thrown vertically from a moving skateboard. Special applications plotted the measurement data component by component, allowing a simple determination of initial conditions and g in order to explore the underlying laws of motion. This experiment can easily be performed by students themselves, providing more autonomy in their problem-solving processes than traditional learning approaches. We believe that this autonomy and the authenticity of the experimental tool both foster their motivation.

Image based method for aberration measurement of lithographic tools

Science.gov (United States)

Xu, Shuang; Tao, Bo; Guo, Yongxing; Li, Gongfa

2018-01-01

Information of lens aberration of lithographic tools is important as it directly affects the intensity distribution in the image plane. Zernike polynomials are commonly used for a mathematical description of lens aberrations. Due to the advantage of lower cost and easier implementation of tools, image based measurement techniques have been widely used. Lithographic tools are typically partially coherent systems that can be described by a bilinear model, which entails time consuming calculations and does not lend a simple and intuitive relationship between lens aberrations and the resulted images. Previous methods for retrieving lens aberrations in such partially coherent systems involve through-focus image measurements and time-consuming iterative algorithms. In this work, we propose a method for aberration measurement in lithographic tools, which only requires measuring two images of intensity distribution. Two linear formulations are derived in matrix forms that directly relate the measured images to the unknown Zernike coefficients. Consequently, an efficient non-iterative solution is obtained.

Strategy as simple rules.

Science.gov (United States)

Eisenhardt, K M; Sull, D N

2001-01-01

The success of Yahoo!, eBay, Enron, and other companies that have become adept at morphing to meet the demands of changing markets can't be explained using traditional thinking about competitive strategy. These companies have succeeded by pursuing constantly evolving strategies in market spaces that were considered unattractive according to traditional measures. In this article--the third in an HBR series by Kathleen Eisenhardt and Donald Sull on strategy in the new economy--the authors ask, what are the sources of competitive advantage in high-velocity markets? The secret, they say, is strategy as simple rules. The companies know that the greatest opportunities for competitive advantage lie in market confusion, but they recognize the need for a few crucial strategic processes and a few simple rules. In traditional strategy, advantage comes from exploiting resources or stable market positions. In strategy as simple rules, advantage comes from successfully seizing fleeting opportunities. Key strategic processes, such as product innovation, partnering, or spinout creation, place the company where the flow of opportunities is greatest. Simple rules then provide the guidelines within which managers can pursue such opportunities. Simple rules, which grow out of experience, fall into five broad categories: how- to rules, boundary conditions, priority rules, timing rules, and exit rules. Companies with simple-rules strategies must follow the rules religiously and avoid the temptation to change them too frequently. A consistent strategy helps managers sort through opportunities and gain short-term advantage by exploiting the attractive ones. In stable markets, managers rely on complicated strategies built on detailed predictions of the future. But when business is complicated, strategy should be simple.

Simple WZW currents

International Nuclear Information System (INIS)

Fuchs, J.

1990-08-01

A complete classification of simple currents of WZW theory is obtained. The proof is based on an analysis of the quantum dimensions of the primary fields. Simple currents are precisely the primaries with unit quantum dimension; for WZW theories explicit formulae for the quantum dimensions can be derived so that an identification of the fields with unit quantum dimension is possible. (author). 19 refs.; 2 tabs

Tool for efficient intermodulation analysis using conventional HB packages

OpenAIRE

Vannini, G.; Filicori, F.; Traverso, P.

1999-01-01

A simple and efficient approach is proposed for the intermodulation analysis of nonlinear microwave circuits. The algorithm, which is based on a very mild assumption about the frequency response of the linear part of the circuit, allows for a reduction in computing time and memory requirement. Moreover. It can be easily implemented using any conventional tool for harmonic-balance circuit analysis

The terminator "toy" chemistry test: a simple tool to assess errors in transport schemes

Directory of Open Access Journals (Sweden)

P. H. Lauritzen

2015-05-01

Full Text Available This test extends the evaluation of transport schemes from prescribed advection of inert scalars to reactive species. The test consists of transporting two interacting chemical species in the Nair and Lauritzen 2-D idealized flow field. The sources and sinks for these two species are given by a simple, but non-linear, "toy" chemistry that represents combination (X + X → X2 and dissociation (X2 → X + X. This chemistry mimics photolysis-driven conditions near the solar terminator, where strong gradients in the spatial distribution of the species develop near its edge. Despite the large spatial variations in each species, the weighted sum XT = X + 2X2 should always be preserved at spatial scales at which molecular diffusion is excluded. The terminator test demonstrates how well the advection–transport scheme preserves linear correlations. Chemistry–transport (physics–dynamics coupling can also be studied with this test. Examples of the consequences of this test are shown for illustration.

Structure of simple liquids; Structure des liquides simples

Energy Technology Data Exchange (ETDEWEB)

Blain, J F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1969-07-01

The results obtained by application to argon and sodium of the two important methods of studying the structure of liquids: scattering of X-rays and neutrons, are presented on one hand. On the other hand the principal models employed for reconstituting the structure of simple liquids are exposed: mathematical models, lattice models and their derived models, experimental models. (author) [French] On presente d'une part les resultats obtenus par application a l'argon et au sodium des deux principales methodes d'etude de la structure des liquides: la diffusion des rayons X et la diffusion des neutrons; d'autre part, les principaux modeles employes pour reconstituer la structure des liquides simples sont exposes: modeles mathematiques, modeles des reseaux et modeles derives, modeles experimentaux. (auteur)

So simple, so hard: Taking medication as directed.

Science.gov (United States)

Burkholder, Rebecca; Linn, Elaine

Millions of Americans either fail to take the full course of prescribed medication or they take it incorrectly. The problem is particularly serious for people with cardiovascular disease, respiratory disease, and diabetes, and for racially and ethnically diverse populations. The (U.S.) National Consumers League through its Script Your Future medication adherence awareness campaign presented the conference "So Simple, So Hard: Taking Medications as Directed", convening health care professionals, community health workers, consumer and patient advocates, researchers, industry representatives, public agencies, and policymakers. This a one-day research symposium aimed to explore challenges and barriers to medication adherence and to highlight tools and strategies to improve adherence and health outcomes, particularly among underserved populations. The conference began with presentations on adherence research and health disparities, and continued with presentations on strategies and tools to improve adherence that could be utilized in health care practices or organizations (including assessing adherence, medication synchronization, and comprehensive medication management). Through group discussions, the conference provided a forum for participants to interact and lay the groundwork to develop partnerships for collaborative initiatives to improve appropriate medication use and adherence. Participants surveyed at the end of the day and 30 days after the conference reported that they found the meeting highly useful (rated 4.6 out of 5), with the vast majority saying they learned about research and tools they can apply in their work and made new connections for potential collaborations. The conference learnings are being shared by participants and disseminated to other interested organizations and individuals. Copyright © 2016 Elsevier Inc. All rights reserved.

Supporting geoscience with graphical-user-interface Internet tools for the Macintosh

Science.gov (United States)

Robin, Bernard

1995-07-01

This paper describes a suite of Macintosh graphical-user-interface (GUI) software programs that can be used in conjunction with the Internet to support geoscience education. These software programs allow science educators to access and retrieve a large body of resources from an increasing number of network sites, taking advantage of the intuitive, simple-to-use Macintosh operating system. With these tools, educators easily can locate, download, and exchange not only text files but also sound resources, video movie clips, and software application files from their desktop computers. Another major advantage of these software tools is that they are available at no cost and may be distributed freely. The following GUI software tools are described including examples of how they can be used in an educational setting: ∗ Eudora—an e-mail program ∗ NewsWatcher—a newsreader ∗ TurboGopher—a Gopher program ∗ Fetch—a software application for easy File Transfer Protocol (FTP) ∗ NCSA Mosaic—a worldwide hypertext browsing program. An explosive growth of online archives currently is underway as new electronic sites are being added continuously to the Internet. Many of these resources may be of interest to science educators who learn they can share not only ASCII text files, but also graphic image files, sound resources, QuickTime movie clips, and hypermedia projects with colleagues from locations around the world. These powerful, yet simple to learn GUI software tools are providing a revolution in how knowledge can be accessed, retrieved, and shared.

Parameter Extraction for PSpice Models by means of an Automated Optimization Tool – An IGBT model Study Case

DEFF Research Database (Denmark)

Suárez, Carlos Gómez; Reigosa, Paula Diaz; Iannuzzo, Francesco

2016-01-01

An original tool for parameter extraction of PSpice models has been released, enabling a simple parameter identification. A physics-based IGBT model is used to demonstrate that the optimization tool is capable of generating a set of parameters which predicts the steady-state and switching behavio...

Experimental guinea pig model of dermatophytosis: a simple and useful tool for the evaluation of new diagnostics and antifungals

DEFF Research Database (Denmark)

Saunte, D.M.; Hasselby, J.P.; Brillowska-Dabrowska, A.

2008-01-01

The aim of this study was to establish a simple guinea pig model for the purpose of evaluating diagnostic principles and treatment modalities for dermatophytic infections. The following variables were evaluated; pre-treatment of the skin by shaving versus tape stripping, Microsporum canis...

Simple technologies and diverse food strategies of the Late Pleistocene and Early Holocene at Huaca Prieta, Coastal Peru.

Science.gov (United States)

Dillehay, Tom D; Goodbred, Steve; Pino, Mario; Vásquez Sánchez, Víctor F; Tham, Teresa Rosales; Adovasio, James; Collins, Michael B; Netherly, Patricia J; Hastorf, Christine A; Chiou, Katherine L; Piperno, Dolores; Rey, Isabel; Velchoff, Nancy

2017-05-01

Simple pebble tools, ephemeral cultural features, and the remains of maritime and terrestrial foods are present in undisturbed Late Pleistocene and Early Holocene deposits underneath a large human-made mound at Huaca Prieta and nearby sites on the Pacific coast of northern Peru. Radiocarbon ages indicate an intermittent human presence dated between ~15,000 and 8000 calendar years ago before the mound was built. The absence of fishhooks, harpoons, and bifacial stone tools suggests that technologies of gathering, trapping, clubbing, and exchange were used primarily to procure food resources along the shoreline and in estuarine wetlands and distant mountains. The stone artifacts are minimally worked unifacial stone tools characteristic of several areas of South America. Remains of avocado, bean, and possibly cultivated squash and chile pepper are also present, suggesting human transport and consumption. Our new findings emphasize an early coastal lifeway of diverse food procurement strategies that suggest detailed observation of resource availability in multiple environments and a knowledgeable economic organization, although technologies were simple and campsites were seemingly ephemeral and discontinuous. These findings raise questions about the pace of early human movement along some areas of the Pacific coast and the level of knowledge and technology required to exploit maritime and inland resources.

Sodium-glucose cotransporter 2 inhibitor use: A pharmaco-ergonomic qualification tool

Directory of Open Access Journals (Sweden)

Sanjay Kalra

2017-01-01

Full Text Available Pharmaco-ergonomics implies tailoring the drug therapy to an individual patient's requirement(s. The development of sodium-glucose cotransporter 2 inhibitor (SGLT2-i agents has impelled multiple clinical considerations, in the management of type-2 diabetes. This paper attempts to summarize the pharmaco-ergonomic considerations for these agents, in the form of an SGLT2-i qualification tool, based on a clinical score. This tool may serve as a simple and inexpensive practical guide, to optimize the risk-benefit considerations for SGLT2-i agents.

A least-squares computational ''tool kit''

International Nuclear Information System (INIS)

Smith, D.L.

1993-04-01

The information assembled in this report is intended to offer a useful computational ''tool kit'' to individuals who are interested in a variety of practical applications for the least-squares method of parameter estimation. The fundamental principles of Bayesian analysis are outlined first and these are applied to development of both the simple and the generalized least-squares conditions. Formal solutions that satisfy these conditions are given subsequently. Their application to both linear and non-linear problems is described in detail. Numerical procedures required to implement these formal solutions are discussed and two utility computer algorithms are offered for this purpose (codes LSIOD and GLSIOD written in FORTRAN). Some simple, easily understood examples are included to illustrate the use of these algorithms. Several related topics are then addressed, including the generation of covariance matrices, the role of iteration in applications of least-squares procedures, the effects of numerical precision and an approach that can be pursued in developing data analysis packages that are directed toward special applications

Simple Rules, Not So Simple: The Use of International Ovarian Tumor Analysis (IOTA) Terminology and Simple Rules in Inexperienced Hands in a Prospective Multicenter Cohort Study.

Science.gov (United States)

Meys, Evelyne; Rutten, Iris; Kruitwagen, Roy; Slangen, Brigitte; Lambrechts, Sandrina; Mertens, Helen; Nolting, Ernst; Boskamp, Dieuwke; Van Gorp, Toon

2017-12-01

 To analyze how well untrained examiners - without experience in the use of International Ovarian Tumor Analysis (IOTA) terminology or simple ultrasound-based rules (simple rules) - are able to apply IOTA terminology and simple rules and to assess the level of agreement between non-experts and an expert.  This prospective multicenter cohort study enrolled women with ovarian masses. Ultrasound was performed by non-expert examiners and an expert. Ultrasound features were recorded using IOTA nomenclature, and used for classifying the mass by simple rules. Interobserver agreement was evaluated with Fleiss' kappa and percentage agreement between observers.  50 consecutive women were included. We observed 46 discrepancies in the description of ovarian masses when non-experts utilized IOTA terminology. Tumor type was misclassified often (n = 22), resulting in poor interobserver agreement between the non-experts and the expert (kappa = 0.39, 95 %-CI 0.244 - 0.529, percentage of agreement = 52.0 %). Misinterpretation of simple rules by non-experts was observed 57 times, resulting in an erroneous diagnosis in 15 patients (30 %). The agreement for classifying the mass as benign, malignant or inconclusive by simple rules was only moderate between the non-experts and the expert (kappa = 0.50, 95 %-CI 0.300 - 0.704, percentage of agreement = 70.0 %). The level of agreement for all 10 simple rules features varied greatly (kappa index range: -0.08 - 0.74, percentage of agreement 66 - 94 %).  Although simple rules are useful to distinguish benign from malignant adnexal masses, they are not that simple for untrained examiners. Training with both IOTA terminology and simple rules is necessary before simple rules can be introduced into guidelines and daily clinical practice. © Georg Thieme Verlag KG Stuttgart · New York.

Simple tool for the rapid, automated quantification of glacier advance/retreat observations using multiple methods

Science.gov (United States)

Lea, J.

2017-12-01

The quantification of glacier change is a key variable within glacier monitoring, with the method used potentially being crucial to ensuring that data can be appropriately compared with environmental data. The topic and timescales of study (e.g. land/marine terminating environments; sub-annual/decadal/centennial/millennial timescales) often mean that different methods are more suitable for different problems. However, depending on the GIS/coding expertise of the user, some methods can potentially be time consuming to undertake, making large-scale studies problematic. In addition, examples exist where different users have nominally applied the same methods in different studies, though with minor methodological inconsistencies in their approach. In turn, this will have implications for data homogeneity where regional/global datasets may be constructed. Here, I present a simple toolbox scripted in a Matlab® environment that requires only glacier margin and glacier centreline data to quantify glacier length, glacier change between observations, rate of change, in addition to other metrics. The toolbox includes the option to apply the established centreline or curvilinear box methods, or a new method: the variable box method - designed for tidewater margins where box width is defined as the total width of the individual terminus observation. The toolbox is extremely flexible, and has the option to be applied as either Matlab® functions within user scripts, or via a graphical user interface (GUI) for those unfamiliar with a coding environment. In both instances, there is potential to apply the methods quickly to large datasets (100s-1000s of glaciers, with potentially similar numbers of observations each), thus ensuring large scale methodological consistency (and therefore data homogeneity) and allowing regional/global scale analyses to be achievable for those with limited GIS/coding experience. The toolbox has been evaluated against idealised scenarios demonstrating

Video Analysis of Projectile Motion Using Tablet Computers as Experimental Tools

Science.gov (United States)

Klein, P.; Gröber, S.; Kuhn, J.; Müller, A.

2014-01-01

Tablet computers were used as experimental tools to record and analyse the motion of a ball thrown vertically from a moving skateboard. Special applications plotted the measurement data component by component, allowing a simple determination of initial conditions and "g" in order to explore the underlying laws of motion. This experiment…

From complex to simple: interdisciplinary stochastic models

International Nuclear Information System (INIS)

Mazilu, D A; Zamora, G; Mazilu, I

2012-01-01

We present two simple, one-dimensional, stochastic models that lead to a qualitative understanding of very complex systems from biology, nanoscience and social sciences. The first model explains the complicated dynamics of microtubules, stochastic cellular highways. Using the theory of random walks in one dimension, we find analytical expressions for certain physical quantities, such as the time dependence of the length of the microtubules, and diffusion coefficients. The second one is a stochastic adsorption model with applications in surface deposition, epidemics and voter systems. We introduce the ‘empty interval method’ and show sample calculations for the time-dependent particle density. These models can serve as an introduction to the field of non-equilibrium statistical physics, and can also be used as a pedagogical tool to exemplify standard statistical physics concepts, such as random walks or the kinetic approach of the master equation. (paper)

Sophisticated lessons from simple organisms: appreciating the value of curiosity-driven research

Directory of Open Access Journals (Sweden)

Robert J. Duronio

2017-12-01

Full Text Available For hundreds of years, biologists have studied accessible organisms such as garden peas, sea urchins collected at low tide, newt eggs, and flies circling rotten fruit. These organisms help us to understand the world around us, attracting and inspiring each new generation of biologists with the promise of mystery and discovery. Time and time again, what we learn from such simple organisms has emphasized our common biological origins by proving to be applicable to more complex organisms, including humans. Yet, biologists are increasingly being tasked with developing applications from the known, rather than being allowed to follow a path to discovery of the as yet unknown. Here, we provide examples of important lessons learned from research using selected non-vertebrate organisms. We argue that, for the purpose of understanding human disease, simple organisms cannot and should not be replaced solely by human cell-based culture systems. Rather, these organisms serve as powerful discovery tools for new knowledge that could subsequently be tested for conservation in human cell-based culture systems. In this way, curiosity-driven biological research in simple organisms has and will continue to pay huge dividends in both the short and long run for improving the human condition.

Simple-MSSM: a simple and efficient method for simultaneous multi-site saturation mutagenesis.

Science.gov (United States)

Cheng, Feng; Xu, Jian-Miao; Xiang, Chao; Liu, Zhi-Qiang; Zhao, Li-Qing; Zheng, Yu-Guo

2017-04-01

To develop a practically simple and robust multi-site saturation mutagenesis (MSSM) method that enables simultaneously recombination of amino acid positions for focused mutant library generation. A general restriction enzyme-free and ligase-free MSSM method (Simple-MSSM) based on prolonged overlap extension PCR (POE-PCR) and Simple Cloning techniques. As a proof of principle of Simple-MSSM, the gene of eGFP (enhanced green fluorescent protein) was used as a template gene for simultaneous mutagenesis of five codons. Forty-eight randomly selected clones were sequenced. Sequencing revealed that all the 48 clones showed at least one mutant codon (mutation efficiency = 100%), and 46 out of the 48 clones had mutations at all the five codons. The obtained diversities at these five codons are 27, 24, 26, 26 and 22, respectively, which correspond to 84, 75, 81, 81, 69% of the theoretical diversity offered by NNK-degeneration (32 codons; NNK, K = T or G). The enzyme-free Simple-MSSM method can simultaneously and efficiently saturate five codons within one day, and therefore avoid missing interactions between residues in interacting amino acid networks.

Value based building renovation - A tool for decision-making and evaluation

DEFF Research Database (Denmark)

Jensen, Per Anker; Maslesa, Esmir

2015-01-01

Research on the barriers for building renovation in Denmark has revealed that an important obstacle is a lack of simple and holistic tools that can assist stakeholders in prioritisation and decision-making during the early stages of building renovation projects. The purpose of this article...... is to present a tool - RENO-EVALUE, which can be used as decision support for sustainable renovation projects, and for evaluation, during and after building renovations. The tool is a result from the European Eracobuild project ACES - "A concept for promotion of sustainable retrofitting and renovation in early...... stages". This article presents the main result of a work package concerning benefits of renovation. RENO-EVALUE has been developed from four case studies on renovation projects in Denmark, tested and validated on the cases and in a Delphi study. The tool is value based by focusing on the different...

A set of tools for determining the LAT performance in specific applications

International Nuclear Information System (INIS)

Lott, B.; Ballet, J.; Chiang, J.; Lonjou, V.; Funk, S.

2007-01-01

The poster presents a set of simple tools being developed to predict GLAST's performance for specific cases, like the accumulation time needed to reach a given significance or statistical accuracy for a particular source. Different examples are given, like the generation of a full-sky sensitivity map

Simple Finite Sums

KAUST Repository

Alabdulmohsin, Ibrahim M.

2018-01-01

We will begin our treatment of summability calculus by analyzing what will be referred to, throughout this book, as simple finite sums. Even though the results of this chapter are particular cases of the more general results presented in later chapters, they are important to start with for a few reasons. First, this chapter serves as an excellent introduction to what summability calculus can markedly accomplish. Second, simple finite sums are encountered more often and, hence, they deserve special treatment. Third, the results presented in this chapter for simple finite sums will, themselves, be used as building blocks for deriving the most general results in subsequent chapters. Among others, we establish that fractional finite sums are well-defined mathematical objects and show how various identities related to the Euler constant as well as the Riemann zeta function can actually be derived in an elementary manner using fractional finite sums.

Simple Finite Sums

KAUST Repository

Alabdulmohsin, Ibrahim M.

2018-03-07

We will begin our treatment of summability calculus by analyzing what will be referred to, throughout this book, as simple finite sums. Even though the results of this chapter are particular cases of the more general results presented in later chapters, they are important to start with for a few reasons. First, this chapter serves as an excellent introduction to what summability calculus can markedly accomplish. Second, simple finite sums are encountered more often and, hence, they deserve special treatment. Third, the results presented in this chapter for simple finite sums will, themselves, be used as building blocks for deriving the most general results in subsequent chapters. Among others, we establish that fractional finite sums are well-defined mathematical objects and show how various identities related to the Euler constant as well as the Riemann zeta function can actually be derived in an elementary manner using fractional finite sums.

New tools for evaluating LQAS survey designs.

Science.gov (United States)

Hund, Lauren

2014-02-15

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

A Job Monitoring and Accounting Tool for the LSF Batch System

International Nuclear Information System (INIS)

Sarkar, Subir; Taneja, Sonia

2011-01-01

This paper presents a web based job monitoring and group-and-user accounting tool for the LSF Batch System. The user oriented job monitoring displays a simple and compact quasi real-time overview of the batch farm for both local and Grid jobs. For Grid jobs the Distinguished Name (DN) of the Grid users is shown. The overview monitor provides the most up-to-date status of a batch farm at any time. The accounting tool works with the LSF accounting log files. The accounting information is shown for a few pre-defined time periods by default. However, one can also compute the same information for any arbitrary time window. The tool already proved to be an extremely useful means to validate more extensive accounting tools available in the Grid world. Several sites have already been using the present tool and more sites running the LSF batch system have shown interest. We shall discuss the various aspects that make the tool essential for site administrators and end-users alike and outline the current status of development as well as future plans.

PipelineDog: a simple and flexible graphic pipeline construction and maintenance tool.

Science.gov (United States)

Zhou, Anbo; Zhang, Yeting; Sun, Yazhou; Xing, Jinchuan

2018-05-01

Analysis pipelines are an essential part of bioinformatics research, and ad hoc pipelines are frequently created by researchers for prototyping and proof-of-concept purposes. However, most existing pipeline management system or workflow engines are too complex for rapid prototyping or learning the pipeline concept. A lightweight, user-friendly and flexible solution is thus desirable. In this study, we developed a new pipeline construction and maintenance tool, PipelineDog. This is a web-based integrated development environment with a modern web graphical user interface. It offers cross-platform compatibility, project management capabilities, code formatting and error checking functions and an online repository. It uses an easy-to-read/write script system that encourages code reuse. With the online repository, it also encourages sharing of pipelines, which enhances analysis reproducibility and accountability. For most users, PipelineDog requires no software installation. Overall, this web application provides a way to rapidly create and easily manage pipelines. PipelineDog web app is freely available at http://web.pipeline.dog. The command line version is available at http://www.npmjs.com/package/pipelinedog and online repository at http://repo.pipeline.dog. ysun@kean.edu or xing@biology.rutgers.edu or ysun@diagnoa.com. Supplementary data are available at Bioinformatics online.

Simple proteomics data analysis in the object-oriented PowerShell.

Science.gov (United States)

Mohammed, Yassene; Palmblad, Magnus

2013-01-01

Scripting languages such as Perl and Python are appreciated for solving simple, everyday tasks in bioinformatics. A more recent, object-oriented command shell and scripting language, Windows PowerShell, has many attractive features: an object-oriented interactive command line, fluent navigation and manipulation of XML files, ability to consume Web services from the command line, consistent syntax and grammar, rich regular expressions, and advanced output formatting. The key difference between classical command shells and scripting languages, such as bash, and object-oriented ones, such as PowerShell, is that in the latter the result of a command is a structured object with inherited properties and methods rather than a simple stream of characters. Conveniently, PowerShell is included in all new releases of Microsoft Windows and therefore already installed on most computers in classrooms and teaching labs. In this chapter we demonstrate how PowerShell in particular allows easy interaction with mass spectrometry data in XML formats, connection to Web services for tools such as BLAST, and presentation of results as formatted text or graphics. These features make PowerShell much more than "yet another scripting language."

An easy physics outreach and teaching tool for holography

International Nuclear Information System (INIS)

Voslion, T; Escarguel, A

2013-01-01

in the framework of scientific outreach at the 'Maison des Sciences' of the Aix-Marseilles University, we created a teaching kit for holography contained in a small case. It includes all the required equipment to produce holograms almost anywhere with a simple optical assembly with a very good vibration tolerance. The fundamental principles of holography and several applications are illustrated through simple experiments: reflection Denisyuk holograms, angular multiplexing, notch filters, holographic interferometry and diffraction holographic gratings. It is possible to use this tool for several purposes: science outreach, teaching for undergraduate and graduate students and continuing education. In this article, we explain the basis of holography, how the kit works, and give some applications and results that can be done with it.

An Intelligent Tool for Activity Data Collection

Directory of Open Access Journals (Sweden)

A. M. Jehad Sarkar

2011-04-01

Full Text Available Activity recognition systems using simple and ubiquitous sensors require a large variety of real-world sensor data for not only evaluating their performance but also training the systems for better functioning. However, a tremendous amount of effort is required to setup an environment for collecting such data. For example, expertise and resources are needed to design and install the sensors, controllers, network components, and middleware just to perform basic data collections. It is therefore desirable to have a data collection method that is inexpensive, flexible, user-friendly, and capable of providing large and diverse activity datasets. In this paper, we propose an intelligent activity data collection tool which has the ability to provide such datasets inexpensively without physically deploying the testbeds. It can be used as an inexpensive and alternative technique to collect human activity data. The tool provides a set of web interfaces to create a web-based activity data collection environment. It also provides a web-based experience sampling tool to take the user’s activity input. The tool generates an activity log using its activity knowledge and the user-given inputs. The activity knowledge is mined from the web. We have performed two experiments to validate the tool’s performance in producing reliable datasets.

The Need for Systematic Naming Software Tools for Exchange of Chemical Information

Directory of Open Access Journals (Sweden)

Andrey Yerin

1999-09-01

Full Text Available The availability of systematic names can enable the simple textual exchange of chemical structure information. The exchange of molecular structures in graphical format or connection tables has become well established in the field of cheminformatics and many structure drawing tools exist to enable this exchange. However, even with the availability of systematic naming rules, software tools to allow the generation of names from structures, and hopefully the reversal of these systematic names back to the original chemical structure, have been sorely lacking in capability and quality. Here we review the need for systematic naming as well as some of the tools and approaches being taken today in this area.

Evaluation of IOTA Simple Ultrasound Rules to Distinguish Benign and Malignant Ovarian Tumours.

Science.gov (United States)

Garg, Sugandha; Kaur, Amarjit; Mohi, Jaswinder Kaur; Sibia, Preet Kanwal; Kaur, Navkiran

2017-08-01

IOTA stands for International Ovarian Tumour Analysis group. Ovarian cancer is one of the common cancers in women and is diagnosed at later stage in majority. The limiting factor for early diagnosis is lack of standardized terms and procedures in gynaecological sonography. Introduction of IOTA rules has provided some consistency in defining morphological features of ovarian masses through a standardized examination technique. To evaluate the efficacy of IOTA simple ultrasound rules in distinguishing benign and malignant ovarian tumours and establishing their use as a tool in early diagnosis of ovarian malignancy. A hospital based case control prospective study was conducted. Patients with suspected ovarian pathology were evaluated using IOTA ultrasound rules and designated as benign or malignant. Findings were correlated with histopathological findings. Collected data was statistically analysed using chi-square test and kappa statistical method. Out of initial 55 patients, 50 patients were included in the final analysis who underwent surgery. IOTA simple rules were applicable in 45 out of these 50 patients (90%). The sensitivity for the detection of malignancy in cases where IOTA simple rules were applicable was 91.66% and the specificity was 84.84%. Accuracy was 86.66%. Classifying inconclusive cases as malignant, the sensitivity and specificity was 93% and 80% respectively. High level of agreement was found between USG and histopathological diagnosis with Kappa value as 0.323. IOTA simple ultrasound rules were highly sensitive and specific in predicting ovarian malignancy preoperatively yet being reproducible, easy to train and use.

History of optics: a modern teaching tool

OpenAIRE

Vázquez Moliní, Daniel; González Cano, Agustín; Díaz Herrera, Natalia; Llombart, N.; Alda, Javier

2012-01-01

The history of optics is a very rich field of science and it is possible to find many simple and significant examples of the application and success of the experimental method and therefore is a very good tool to transmit to the student the way science proceeds and to introduce the right spirit of critical analysis, building and testing of models, etc. Optical phenomena are specially well suited for this because in fact optical observations and experiments have made science advance in a cruci...

A Simple Combinatorial Codon Mutagenesis Method for Targeted Protein Engineering.

Science.gov (United States)

Belsare, Ketaki D; Andorfer, Mary C; Cardenas, Frida S; Chael, Julia R; Park, Hyun June; Lewis, Jared C

2017-03-17

Directed evolution is a powerful tool for optimizing enzymes, and mutagenesis methods that improve enzyme library quality can significantly expedite the evolution process. Here, we report a simple method for targeted combinatorial codon mutagenesis (CCM). To demonstrate the utility of this method for protein engineering, CCM libraries were constructed for cytochrome P450 BM3 , pfu prolyl oligopeptidase, and the flavin-dependent halogenase RebH; 10-26 sites were targeted for codon mutagenesis in each of these enzymes, and libraries with a tunable average of 1-7 codon mutations per gene were generated. Each of these libraries provided improved enzymes for their respective transformations, which highlights the generality, simplicity, and tunability of CCM for targeted protein engineering.

The VI-Suite: a set of environmental analysis tools with geospatial data applications

NARCIS (Netherlands)

Southall, Ryan; Biljecki, F.

2017-01-01

Background: The VI-Suite is a free and open-source addon for the 3D content creation application Blender, developed primarily as a tool for the contextual and performative analysis of buildings. Its functionality has grown from simple, static lighting analysis to fully parametric lighting,

A simple method to predict regional fish abundance: an example in the McKenzie River Basin, Oregon

Science.gov (United States)

D.J. McGarvey; J.M. Johnston

2011-01-01

Regional assessments of fisheries resources are increasingly called for, but tools with which to perform them are limited. We present a simple method that can be used to estimate regional carrying capacity and apply it to the McKenzie River Basin, Oregon. First, we use a macroecological model to predict trout densities within small, medium, and large streams in the...

Simple prostatectomy

Science.gov (United States)

... Han M, Partin AW. Simple prostatectomy: open and robot-assisted laparoscopic approaches. In: Wein AJ, Kavoussi LR, ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

High-Performance Integrated Virtual Environment (HIVE) Tools and Applications for Big Data Analysis.

Science.gov (United States)

Simonyan, Vahan; Mazumder, Raja

2014-09-30

The High-performance Integrated Virtual Environment (HIVE) is a high-throughput cloud-based infrastructure developed for the storage and analysis of genomic and associated biological data. HIVE consists of a web-accessible interface for authorized users to deposit, retrieve, share, annotate, compute and visualize Next-generation Sequencing (NGS) data in a scalable and highly efficient fashion. The platform contains a distributed storage library and a distributed computational powerhouse linked seamlessly. Resources available through the interface include algorithms, tools and applications developed exclusively for the HIVE platform, as well as commonly used external tools adapted to operate within the parallel architecture of the system. HIVE is composed of a flexible infrastructure, which allows for simple implementation of new algorithms and tools. Currently, available HIVE tools include sequence alignment and nucleotide variation profiling tools, metagenomic analyzers, phylogenetic tree-building tools using NGS data, clone discovery algorithms, and recombination analysis algorithms. In addition to tools, HIVE also provides knowledgebases that can be used in conjunction with the tools for NGS sequence and metadata analysis.

High-Performance Integrated Virtual Environment (HIVE Tools and Applications for Big Data Analysis

Directory of Open Access Journals (Sweden)

Vahan Simonyan

2014-09-01

Full Text Available The High-performance Integrated Virtual Environment (HIVE is a high-throughput cloud-based infrastructure developed for the storage and analysis of genomic and associated biological data. HIVE consists of a web-accessible interface for authorized users to deposit, retrieve, share, annotate, compute and visualize Next-generation Sequencing (NGS data in a scalable and highly efficient fashion. The platform contains a distributed storage library and a distributed computational powerhouse linked seamlessly. Resources available through the interface include algorithms, tools and applications developed exclusively for the HIVE platform, as well as commonly used external tools adapted to operate within the parallel architecture of the system. HIVE is composed of a flexible infrastructure, which allows for simple implementation of new algorithms and tools. Currently, available HIVE tools include sequence alignment and nucleotide variation profiling tools, metagenomic analyzers, phylogenetic tree-building tools using NGS data, clone discovery algorithms, and recombination analysis algorithms. In addition to tools, HIVE also provides knowledgebases that can be used in conjunction with the tools for NGS sequence and metadata analysis.

General practice ethnicity data: evaluation of a tool

Directory of Open Access Journals (Sweden)

Neuwelt P

2014-03-01

Full Text Available INTRODUCTION: There is evidence that the collection of ethnicity data in New Zealand primary care is variable and that data recording in practices does not always align with the procedures outlined in the Ethnicity Data Protocols for the Health and Disability Sector. In 2010, The Ministry of Health funded the development of a tool to audit the collection of ethnicity data in primary care. The aim of this study was to pilot the Ethnicity Data Audit Tool (EAT in general practice. The goal was to evaluate the tool and identify recommendations for its improvement. METHODS: Eight general practices in the Waitemata District Health Board region participated in the EAT pilot. Feedback about the pilot process was gathered by questionnaires and interviews, to gain an understanding of practices’ experiences in using the tool. Questionnaire and interview data were analysed using a simple analytical framework and a general inductive method. FINDINGS: General practice receptionists, practice managers and general practitioners participated in the pilot. Participants found the pilot process challenging but enlightening. The majority felt that the EAT was a useful quality improvement tool for handling patient ethnicity data. Larger practices were the most positive about the tool. CONCLUSION: The findings suggest that, with minor improvements to the toolkit, the EAT has the potential to lead to significant improvements in the quality of ethnicity data collection and recording in New Zealand general practices. Other system-level factors also need to be addressed.

Addressing challenges in single species assessments via a simple state-space assessment model

DEFF Research Database (Denmark)

Nielsen, Anders

Single-species and age-structured fish stock assessments still remains the main tool for managing fish stocks. A simple state-space assessment model is presented as an alternative to (semi) deterministic procedures and the full parametric statistical catch at age models. It offers a solution...... to some of the key challenges of these models. Compared to the deterministic procedures it solves a list of problems originating from falsely assuming that age classified catches are known without errors and allows quantification of uncertainties of estimated quantities of interest. Compared to full...

New tools for comparing microscopy images : Quantitative analysis of cell types in Bacillus subtilis

NARCIS (Netherlands)

van Gestel, Jordi; Vlamakis, Hera; Kolter, Roberto

2015-01-01

Fluorescence microscopy is a method commonly used to examine individual differences between bacterial cells, yet many studies still lack a quantitative analysis of fluorescence microscopy data. Here we introduce some simple tools that microbiologists can use to analyze and compare their microscopy

Droids Made Simple

CERN Document Server

Mazo, Gary

2011-01-01

If you have a Droid series smartphone - Droid, Droid X, Droid 2, or Droid 2 Global - and are eager to get the most out of your device, Droids Made Simple is perfect for you. Authors Martin Trautschold, Gary Mazo and Marziah Karch guide you through all of the features, tips, and tricks using their proven combination of clear instructions and detailed visuals. With hundreds of annotated screenshots and step-by-step directions, Droids Made Simple will transform you into a Droid expert, improving your productivity, and most importantly, helping you take advantage of all of the cool features that c

Association "Les Simples"

OpenAIRE

Thouzery, Michel

2014-01-01

Fondée par les producteurs du Syndicat Inter-Massifs pour la Production et l’Économie des Simples (S.I.M.P.L.E.S), l’association base son action sur la recherche et le maintien d’une production de qualité (herboristerie et préparations à base de plantes) qui prend en compte le respect de l’environnement et la pérennité des petits producteurs en zone de montagne. Actions de formation Stages de découverte de la flore médicinale sauvage, Stages de culture et transformation des plantes médicinale...

Proceedings of the of the Eleventh Workshop on Language Descriptions, Tools and Applications (LDTA 2011)

DEFF Research Database (Denmark)

This volume contains the proceedings of the Eleventh Workshop on Language Descriptions, Tools and Applications (LDTA 2011), held in Saarbrücken, Germany on March 26 & 27, 2011. LDTA is a two-day satellite event of ETAPS (European Joint Conferences on Theory and Practice of Software) and organized...... in cooperation with ACM SIGPLAN. LDTA is an application and tool-oriented workshop focused on grammarware---software based on grammars in some form. Grammarware applications are typically language processing applications and traditional examples include parsers, program analyzers, optimizers and translators......, as well as techniques and tools, to the test in a new way in the form of the LDTA Tool Challenge. Tool developers were invited to participate in the Challenge by developing solutions to a range of language processing tasks over a simple but evolving set of imperative programming languages. Tool challenge...

The Effect of Combining Analogy-Based Simulation and Laboratory Activities on Turkish Elementary School Students' Understanding of Simple Electric Circuits

Science.gov (United States)

Unlu, Zeynep Koyunlu; Dokme, Ibilge

2011-01-01

The purpose of this study was to investigate whether the combination of both analogy-based simulation and laboratory activities as a teaching tool was more effective than utilizing them separately in teaching the concepts of simple electricity. The quasi-experimental design that involved 66 seventh grade students from urban Turkish elementary…

Causal Relation Analysis Tool of the Case Study in the Engineer Ethics Education

Science.gov (United States)

Suzuki, Yoshio; Morita, Keisuke; Yasui, Mitsukuni; Tanada, Ichirou; Fujiki, Hiroyuki; Aoyagi, Manabu

In engineering ethics education, the virtual experiencing of dilemmas is essential. Learning through the case study method is a particularly effective means. Many case studies are, however, difficult to deal with because they often include many complex causal relationships and social factors. It would thus be convenient if there were a tool that could analyze the factors of a case example and organize them into a hierarchical structure to get a better understanding of the whole picture. The tool that was developed applies a cause-and-effect matrix and simple graph theory. It analyzes the causal relationship between facts in a hierarchical structure and organizes complex phenomena. The effectiveness of this tool is shown by presenting an actual example.

A Maturity Grid Assessment Tool for Environmentally Conscious Design in the Medical Device Industry

DEFF Research Database (Denmark)

Moultrie, James; Sutcliffe, Laura Francesca Rose; Maier, Anja

2016-01-01

. This intervention tool provides designers and product marketers with insights on how to improve the design of their medical devices and specifically allows consideration of the complex trade-offs between decisions that influence different life-cycle stages. Through the tool, actionable insight is created......The medical device industry is growing increasingly concerned about environmental impact of products. Whilst there are many tools aiming to support environmentally conscious design, they are typically complex to use, demand substantial data collection and are not tailored to the specific needs...... of the medical device sector. This paper reports on the development of a Maturity Grid to address this gap. This novel design tool was developed iteratively through application in five case studies. The tool captures principles of eco-design for medical devices in a simple form, designed to be used by a team...

MyPMFs: a simple tool for creating statistical potentials to assess protein structural models.

Science.gov (United States)

Postic, Guillaume; Hamelryck, Thomas; Chomilier, Jacques; Stratmann, Dirk

2018-05-29

Evaluating the model quality of protein structures that evolve in environments with particular physicochemical properties requires scoring functions that are adapted to their specific residue compositions and/or structural characteristics. Thus, computational methods developed for structures from the cytosol cannot work properly on membrane or secreted proteins. Here, we present MyPMFs, an easy-to-use tool that allows users to train statistical potentials of mean force (PMFs) on the protein structures of their choice, with all parameters being adjustable. We demonstrate its use by creating an accurate statistical potential for transmembrane protein domains. We also show its usefulness to study the influence of the physical environment on residue interactions within protein structures. Our open-source software is freely available for download at https://github.com/bibip-impmc/mypmfs. Copyright © 2018. Published by Elsevier B.V.

Linear regression metamodeling as a tool to summarize and present simulation model results.

Science.gov (United States)

Jalal, Hawre; Dowd, Bryan; Sainfort, François; Kuntz, Karen M

2013-10-01

Modelers lack a tool to systematically and clearly present complex model results, including those from sensitivity analyses. The objective was to propose linear regression metamodeling as a tool to increase transparency of decision analytic models and better communicate their results. We used a simplified cancer cure model to demonstrate our approach. The model computed the lifetime cost and benefit of 3 treatment options for cancer patients. We simulated 10,000 cohorts in a probabilistic sensitivity analysis (PSA) and regressed the model outcomes on the standardized input parameter values in a set of regression analyses. We used the regression coefficients to describe measures of sensitivity analyses, including threshold and parameter sensitivity analyses. We also compared the results of the PSA to deterministic full-factorial and one-factor-at-a-time designs. The regression intercept represented the estimated base-case outcome, and the other coefficients described the relative parameter uncertainty in the model. We defined simple relationships that compute the average and incremental net benefit of each intervention. Metamodeling produced outputs similar to traditional deterministic 1-way or 2-way sensitivity analyses but was more reliable since it used all parameter values. Linear regression metamodeling is a simple, yet powerful, tool that can assist modelers in communicating model characteristics and sensitivity analyses.

Evaluation of IOTA Simple Ultrasound Rules to Distinguish Benign and Malignant Ovarian Tumours

Science.gov (United States)

Kaur, Amarjit; Mohi, Jaswinder Kaur; Sibia, Preet Kanwal; Kaur, Navkiran

2017-01-01

Introduction IOTA stands for International Ovarian Tumour Analysis group. Ovarian cancer is one of the common cancers in women and is diagnosed at later stage in majority. The limiting factor for early diagnosis is lack of standardized terms and procedures in gynaecological sonography. Introduction of IOTA rules has provided some consistency in defining morphological features of ovarian masses through a standardized examination technique. Aim To evaluate the efficacy of IOTA simple ultrasound rules in distinguishing benign and malignant ovarian tumours and establishing their use as a tool in early diagnosis of ovarian malignancy. Materials and Methods A hospital based case control prospective study was conducted. Patients with suspected ovarian pathology were evaluated using IOTA ultrasound rules and designated as benign or malignant. Findings were correlated with histopathological findings. Collected data was statistically analysed using chi-square test and kappa statistical method. Results Out of initial 55 patients, 50 patients were included in the final analysis who underwent surgery. IOTA simple rules were applicable in 45 out of these 50 patients (90%). The sensitivity for the detection of malignancy in cases where IOTA simple rules were applicable was 91.66% and the specificity was 84.84%. Accuracy was 86.66%. Classifying inconclusive cases as malignant, the sensitivity and specificity was 93% and 80% respectively. High level of agreement was found between USG and histopathological diagnosis with Kappa value as 0.323. Conclusion IOTA simple ultrasound rules were highly sensitive and specific in predicting ovarian malignancy preoperatively yet being reproducible, easy to train and use. PMID:28969237

Criticality safety validation: Simple geometry, single unit {sup 233}U systems

Energy Technology Data Exchange (ETDEWEB)

Putman, V.L.

1997-06-01

Typically used LMITCO criticality safety computational methods are evaluated for suitability when applied to INEEL {sup 233}U systems which reasonably can be modeled as simple-geometry, single-unit systems. Sixty-seven critical experiments of uranium highly enriched in {sup 233}U, including 57 aqueous solution, thermal-energy systems and 10 metal, fast-energy systems, were modeled. These experiments include 41 cylindrical and 26 spherical cores, and 41 reflected and 26 unreflected systems. No experiments were found for intermediate-neutron-energy ranges, or with interstitial non-hydrogenous materials typical of waste systems, mixed {sup 233}U and plutonium, or reflectors such as steel, lead, or concrete. No simple geometry experiments were found with cubic or annular cores, or approximating infinite sea systems. Calculations were performed with various tools and methodologies. Nine cross-section libraries, based on ENDF/B-IV, -V, or -VI.2, or on Hansen-Roach source data, were used with cross-section processing methods of MCNP or SCALE. The k{sub eff} calculations were performed with neutral-particle transport and Monte Carlo methods of criticality codes DANT, MCNP 4A, and KENO Va.

Squidpops: A Simple Tool to Crowdsource a Global Map of Marine Predation Intensity.

Directory of Open Access Journals (Sweden)

J Emmett Duffy

Full Text Available We present a simple, standardized assay, the squidpop, for measuring the relative feeding intensity of generalist predators in aquatic systems. The assay consists of a 1.3-cm diameter disk of dried squid mantle tethered to a rod, which is either inserted in the sediment in soft-bottom habitats or secured to existing structure. Each replicate squidpop is scored as present or absent after 1 and 24 hours, and the data for analysis are proportions of replicate units consumed at each time. Tests in several habitats of the temperate southeastern USA (Virginia and North Carolina and tropical Central America (Belize confirmed the assay's utility for measuring variation in predation intensity among habitats, among seasons, and along environmental gradients. In Belize, predation intensity varied strongly among habitats, with reef > seagrass = mangrove > unvegetated bare sand. Quantitative visual surveys confirmed that assayed feeding intensity increased with abundance and species richness of fishes across sites, with fish abundance and richness explaining up to 45% and 70% of the variation in bait loss respectively. In the southeastern USA, predation intensity varied seasonally, being highest during summer and declining in late autumn. Deployments in marsh habitats generally revealed a decline in mean predation intensity from fully marine to tidal freshwater sites. The simplicity, economy, and standardization of the squidpop assay should facilitate engagement of scientists and citizens alike, with the goal of constructing high-resolution maps of how top-down control varies through space and time in aquatic ecosystems, and addressing a broad array of long-standing hypotheses in macro- and community ecology.

Mathematics a simple tool for geologists

CERN Document Server

Waltham, D, D

1994-01-01

Uses geological examples to illustrate mathematical ideas. Contains a large number of worked examples, and problems for students to attempt themselves. Answers to all the questions are given at the end of the book.

The IATH ELAN Text-Sync Tool: A Simple System for Mobilizing ELAN Transcripts On- or Off-Line

Science.gov (United States)

Dobrin, Lise M.; Ross, Douglas

2017-01-01

In this article we present the IATH ELAN Text-Sync Tool (ETST; see http://community.village.virginia.edu/etst), a series of scripts and workflow for playing ELAN files and associated audiovisual media in a web browser either on- or off-line. ELAN has become an indispensable part of documentary linguists' toolkit, but it is less than ideal for…

User guide - COE calculation tool for wave energy converters. Draft version 1

Energy Technology Data Exchange (ETDEWEB)

Fernandez-Chozas, J.; Kofoed, J.P. [Aalborg Univ., Aalborg (Denmark); Helstrup Jensen, N.E. [Energinet.dk, Fredericia (Denmark)

2013-08-15

Aalborg University together with Energinet.dk and Julia F. Chozas Consulting Engineer, have released a freely available online spreadsheet to evaluate the Levelised Cost of Energy (LCOE) for wave energy projects. The open-access tool calculates the LCOE based on the power production of a Wave Energy Converter (WEC) at a particular location. Production data may derive from laboratory testing, numerical modelling or from sea trials. The tool has been developed as a transparent and simple model that evaluates WEC's economic feasibility in a range of locations, while scaling WEC's features to the selected site. (Author)

A tool for safety evaluations of road improvements.

Science.gov (United States)

Peltola, Harri; Rajamäki, Riikka; Luoma, Juha

2013-11-01

Road safety impact assessments are requested in general, and the directive on road infrastructure safety management makes them compulsory for Member States of the European Union. However, there is no widely used, science-based safety evaluation tool available. We demonstrate a safety evaluation tool called TARVA. It uses EB safety predictions as the basis for selecting locations for implementing road-safety improvements and provides estimates of safety benefits of selected improvements. Comparing different road accident prediction methods, we demonstrate that the most accurate estimates are produced by EB models, followed by simple accident prediction models, the same average number of accidents for every entity and accident record only. Consequently, advanced model-based estimates should be used. Furthermore, we demonstrate regional comparisons that benefit substantially from such tools. Comparisons between districts have revealed significant differences. However, comparisons like these produce useful improvement ideas only after taking into account the differences in road characteristics between areas. Estimates on crash modification factors can be transferred from other countries but their benefit is greatly limited if the number of target accidents is not properly predicted. Our experience suggests that making predictions and evaluations using the same principle and tools will remarkably improve the quality and comparability of safety estimations. Copyright © 2013 Elsevier Ltd. All rights reserved.

An effective tool to manage the distribution of medicines and monitor the treatment in hospital pharmacies.

Science.gov (United States)

Franzoso, Gianpaolo

2014-01-01

Introduction The purpose of the article is to share a modus operandi and a tool that allows the recruitment and management of thousands of patients and their treatment by using a simple software created by the author and made freely available to all colleague-pharmacists. The author, a pharmacist, created this database because there were no tools on the market with all the features needed to manage the treatment of patients and the orders of drugs to ensure continuity of care without waste of public money. Methods The data collection is facilitated by the software and allows the monitoring of treatment of the patients and their re-evaluation. This tool can create a table containing all the information needed to predict the demand for drugs, the timing of therapies and of the treatment plans. It is an effective instrument to calculate the optimal purchase of drugs and the delivery of therapies to patients. Conclusions A simple tool that allows the management of many patients, reduces research time and facilitates the control of therapies. It allows us to optimize inventory and minimize the stock of drugs. It allows the pharmacist to focus attention on the clinical management of the patient by helping him to follow therapy and respond to his needs.

Reconstructing Nearly Simple Polytopes from their Graph

OpenAIRE

Doolittle, Joseph

2017-01-01

We present a partial description of which polytopes are reconstructible from their graphs. This is an extension of work by Blind and Mani (1987) and Kalai (1988), which showed that simple polytopes can be reconstructed from their graphs. In particular, we introduce a notion of $h$-nearly simple and prove that 1-nearly simple and 2-nearly simple polytopes are reconstructible from their graphs. We also give an example of a 3-nearly simple polytope which is not reconstructible from its graph. Fu...

Evaluation of the nutrition screening tool for childhood cancer (SCAN).

Science.gov (United States)

Murphy, Alexia J; White, Melinda; Viani, Karina; Mosby, Terezie T

2016-02-01

Malnutrition is a serious concern for children with cancer and nutrition screening may offer a simple alternative to nutrition assessment for identifying children with cancer who are at risk of malnutrition. The present paper aimed to evaluate the nutrition screening tool for childhood cancer (SCAN). SCAN was developed after an extensive review of currently available tools and published screening recommendation, consideration of pediatric oncology nutrition guidelines, piloting questions, and consulting with members of International Pediatric Oncology Nutrition Group. In Study 1, the accuracy and validity of SCAN against pediatric subjective global nutrition assessment (pediatric SGNA) was determined. In Study 2, subjects were classified as 'at risk of malnutrition' and 'not at risk of malnutrition' according to SCAN and measures of height, weight, body mass index (BMI) and body composition were compared between the groups. The validation of SCAN against pediatric SGNA showed SCAN had 'excellent' accuracy (0.90, 95% CI 0.78-1.00; p malnutrition' and 'not at risk of malnutrition' according to SCAN, the 'at risk of malnutrition' group had significantly lower values for weight Z score (p = 0.001), BMI Z score (p = 0.001) and fat mass index (FMI) (p = 0.04), than the 'not at risk of malnutrition' group. This study shows that SCAN is a simple, quick and valid tool which can be used to identify children with cancer who are at risk of malnutrition. Copyright © 2015 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

A simple extension of contraction theory to study incremental stability properties

DEFF Research Database (Denmark)

Jouffroy, Jerome

Contraction theory is a recent tool enabling to study the stability of nonlinear systems trajectories with respect to one another, and therefore belongs to the class of incremental stability methods. In this paper, we extend the original definition of contraction theory to incorporate...... in an explicit manner the control input of the considered system. Such an extension, called universal contraction, is quite analogous in spirit to the well-known Input-to-State Stability (ISS). It serves as a simple formulation of incremental ISS, external stability, and detectability in a differential setting....... The hierarchical combination result of contraction theory is restated in this framework, and a differential small-gain theorem is derived from results already available in Lyapunov theory....

Simple mathematical law benchmarks human confrontations

Science.gov (United States)

Johnson, Neil F.; Medina, Pablo; Zhao, Guannan; Messinger, Daniel S.; Horgan, John; Gill, Paul; Bohorquez, Juan Camilo; Mattson, Whitney; Gangi, Devon; Qi, Hong; Manrique, Pedro; Velasquez, Nicolas; Morgenstern, Ana; Restrepo, Elvira; Johnson, Nicholas; Spagat, Michael; Zarama, Roberto

2013-01-01

Many high-profile societal problems involve an individual or group repeatedly attacking another – from child-parent disputes, sexual violence against women, civil unrest, violent conflicts and acts of terror, to current cyber-attacks on national infrastructure and ultrafast cyber-trades attacking stockholders. There is an urgent need to quantify the likely severity and timing of such future acts, shed light on likely perpetrators, and identify intervention strategies. Here we present a combined analysis of multiple datasets across all these domains which account for >100,000 events, and show that a simple mathematical law can benchmark them all. We derive this benchmark and interpret it, using a minimal mechanistic model grounded by state-of-the-art fieldwork. Our findings provide quantitative predictions concerning future attacks; a tool to help detect common perpetrators and abnormal behaviors; insight into the trajectory of a ‘lone wolf'; identification of a critical threshold for spreading a message or idea among perpetrators; an intervention strategy to erode the most lethal clusters; and more broadly, a quantitative starting point for cross-disciplinary theorizing about human aggression at the individual and group level, in both real and online worlds. PMID:24322528

Simple mathematical law benchmarks human confrontations

Science.gov (United States)

Johnson, Neil F.; Medina, Pablo; Zhao, Guannan; Messinger, Daniel S.; Horgan, John; Gill, Paul; Bohorquez, Juan Camilo; Mattson, Whitney; Gangi, Devon; Qi, Hong; Manrique, Pedro; Velasquez, Nicolas; Morgenstern, Ana; Restrepo, Elvira; Johnson, Nicholas; Spagat, Michael; Zarama, Roberto

2013-12-01

Many high-profile societal problems involve an individual or group repeatedly attacking another - from child-parent disputes, sexual violence against women, civil unrest, violent conflicts and acts of terror, to current cyber-attacks on national infrastructure and ultrafast cyber-trades attacking stockholders. There is an urgent need to quantify the likely severity and timing of such future acts, shed light on likely perpetrators, and identify intervention strategies. Here we present a combined analysis of multiple datasets across all these domains which account for >100,000 events, and show that a simple mathematical law can benchmark them all. We derive this benchmark and interpret it, using a minimal mechanistic model grounded by state-of-the-art fieldwork. Our findings provide quantitative predictions concerning future attacks; a tool to help detect common perpetrators and abnormal behaviors; insight into the trajectory of a `lone wolf' identification of a critical threshold for spreading a message or idea among perpetrators; an intervention strategy to erode the most lethal clusters; and more broadly, a quantitative starting point for cross-disciplinary theorizing about human aggression at the individual and group level, in both real and online worlds.

Investigation of Micro Square Structure Fabrication by Applying Textured Cutting Tool in WEDM

Directory of Open Access Journals (Sweden)

Jianguo Zhang

2015-09-01

Full Text Available This paper studies micro structure fabrication by means of a textured tool cutting edge, which is manufactured by applying the wire cut electrical discharge machining (WEDM. Machining performance of the square structure fabrication on the tool cutting edge is investigated in the WEDM process, and the machining accuracy is explored in experimental analyses. In this proposed method, undesired overcut comes from the discharge between the processing debris and the side wall of the target structure. Furthermore, by applying the textured cutting tool, the target square structure is directly fabricated on the alumina workpiece with just a simple turning process, which verifies the feasibility of the proposed tool cutting edge textured method by applying the WEDM. This technology is expected to become a potential method for the mass production of micro structure surfaces in the future.

Comparison of four modeling tools for the prediction of potential distribution for non-indigenous weeds in the United States

Science.gov (United States)

Magarey, Roger; Newton, Leslie; Hong, Seung C.; Takeuchi, Yu; Christie, Dave; Jarnevich, Catherine S.; Kohl, Lisa; Damus, Martin; Higgins, Steven I.; Miller, Leah; Castro, Karen; West, Amanda; Hastings, John; Cook, Gericke; Kartesz, John; Koop, Anthony

2018-01-01

This study compares four models for predicting the potential distribution of non-indigenous weed species in the conterminous U.S. The comparison focused on evaluating modeling tools and protocols as currently used for weed risk assessment or for predicting the potential distribution of invasive weeds. We used six weed species (three highly invasive and three less invasive non-indigenous species) that have been established in the U.S. for more than 75 years. The experiment involved providing non-U. S. location data to users familiar with one of the four evaluated techniques, who then developed predictive models that were applied to the United States without knowing the identity of the species or its U.S. distribution. We compared a simple GIS climate matching technique known as Proto3, a simple climate matching tool CLIMEX Match Climates, the correlative model MaxEnt, and a process model known as the Thornley Transport Resistance (TTR) model. Two experienced users ran each modeling tool except TTR, which had one user. Models were trained with global species distribution data excluding any U.S. data, and then were evaluated using the current known U.S. distribution. The influence of weed species identity and modeling tool on prevalence and sensitivity effects was compared using a generalized linear mixed model. Each modeling tool itself had a low statistical significance, while weed species alone accounted for 69.1 and 48.5% of the variance for prevalence and sensitivity, respectively. These results suggest that simple modeling tools might perform as well as complex ones in the case of predicting potential distribution for a weed not yet present in the United States. Considerations of model accuracy should also be balanced with those of reproducibility and ease of use. More important than the choice of modeling tool is the construction of robust protocols and testing both new and experienced users under blind test conditions that approximate operational conditions.

The Design of SimpleITK

Directory of Open Access Journals (Sweden)

Bradley Christopher Lowekamp

2013-12-01

Full Text Available SimpleITK is a new interface to the Insight Segmentation andRegistration Toolkit (ITK designed to facilitate rapid prototyping, educationand scientific activities, via high level programminglanguages. ITK is a templated C++ library of image processingalgorithms and frameworks for biomedical and other applications, andit was designed to be generic, flexible and extensible. Initially, ITKprovided a direct wrapping interface to languages such as Python andTcl through the WrapITK system. Unlike WrapITK, which exposed ITK'scomplex templated interface, SimpleITK was designed to provide an easyto use and simplified interface to ITK's algorithms. It includesprocedural methods, hides ITK's demand driven pipeline, and provides atemplate-less layer. Also SimpleITK provides practical conveniencessuch as binary distribution packages and overloaded operators. Ouruser-friendly design goals dictated a departure from the directinterface wrapping approach of WrapITK, towards a new facadeclass structure that only exposes the required functionality, hidingITK's extensive template use. Internally SimpleITK utilizes a manualdescription of each filter with code-generation and advanced C++meta-programming to provide the higher-level interface, bringing thecapabilities of ITK to a wider audience. SimpleITK is licensed asopen source software under the Apache License Version 2.0 and more informationabout downloading it can be found at http://www.simpleitk.org.

Simple approach to three-color two-photon microscopy by a fiber-optic wavelength convertor.

Science.gov (United States)

Li, Kuen-Che; Huang, Lynn L H; Liang, Jhih-Hao; Chan, Ming-Che

2016-11-01

A simple approach to multi-color two-photon microscopy of the red, green, and blue fluorescent indicators was reported based on an ultra-compact 1.03-μm femtosecond laser and a nonlinear fiber. Inside the nonlinear fiber, the 1.03-μm laser pulses were simultaneously blue-shifted to 0.6~0.8 μm and red-shifted to 1.2~1.4 μm region by the Cherenkov radiation and fiber Raman gain effects. The wavelength-shifted 0.6~0.8 μm and 1.2~1.4 μm radiations were co-propagated with the residual non-converted 1.03-μm pulses inside the same nonlinear fiber to form a fiber-output three-color femtosecond source. The application of the multi-wavelength sources on multi-color two-photon fluorescence microscopy were also demonstrated. Overall, due to simple system configuration, convenient wavelength conversion, easy wavelength tunability within the entire 0.7~1.35 μm bio-penetration window and less requirement for high power and bulky light sources, the simple approach to multi-color two-photon microscopy could be widely applicable as an easily implemented and excellent research tool for future biomedical and possibly even clinical applications.

A simple and effective method for detecting precipitated proteins in MALDI-TOF MS.

Science.gov (United States)

Oshikane, Hiroyuki; Watabe, Masahiko; Nakaki, Toshio

2018-04-01

MALDI-TOF MS has developed rapidly into an essential analytical tool for the life sciences. Cinnamic acid derivatives are generally employed in routine molecular weight determinations of intact proteins using MALDI-TOF MS. However, a protein of interest may precipitate when mixed with matrix solution, perhaps preventing MS detection. We herein provide a simple approach to enable the MS detection of such precipitated protein species by means of a "direct deposition method" -- loading the precipitant directly onto the sample plate. It is thus expected to improve routine MS analysis of intact proteins. Copyright © 2018. Published by Elsevier Inc.

JJ Stent Removal under Ultrasound Guidance in Women: It is Simple and Safe.

Science.gov (United States)

Amer, Bernard; Gupta, Sandeep; Kanwar, Vijayendra S; Lodh, Bijit; Khumukcham, Somarendra; Akoijam, Kaku Singh

2014-12-01

With the increase in number of patients treated for urological problems with endoscopic procedures, the number of patients with JJ stent is also increasing. The amount of workload thus incurred multiplies, even to the point that, sometimes we waste more time in the operating room removing JJ stents than the actual endourological procedures. Here in our institute, we have devised a very simple and effective way of removing JJ stents in women and also determined the efficacy, safety and cost of JJ stent removal under ultrasound guidance in women in comparison to cystoscopic removal. Two hundred women attending the Department of Urology from July 2012 to July 2013 at RIMS hospital were randomly divided into two arms. One hundred women had their JJ stent removed with cystoscope and another 100 women had their JJ stent removed under ultrasound guidance using simple surgical tools available at the hospital. The primary comparative points were waiting time for operating room appointment date, cost of the procedure, time taken for the procedure, discomfort or pain felt by the patient and urethral injuries. In all the parameters, stent removal under ultrasound guidance was significantly better except for urethral injuries where both the procedures had similar outcomes. We concluded that JJ stent removal under ultrasound guidance in women was simple, effective and safe.

Pseudo-simple heteroclinic cycles in R4

Science.gov (United States)

Chossat, Pascal; Lohse, Alexander; Podvigina, Olga

2018-06-01

We study pseudo-simple heteroclinic cycles for a Γ-equivariant system in R4 with finite Γ ⊂ O(4) , and their nearby dynamics. In particular, in a first step towards a full classification - analogous to that which exists already for the class of simple cycles - we identify all finite subgroups of O(4) admitting pseudo-simple cycles. To this end we introduce a constructive method to build equivariant dynamical systems possessing a robust heteroclinic cycle. Extending a previous study we also investigate the existence of periodic orbits close to a pseudo-simple cycle, which depends on the symmetry groups of equilibria in the cycle. Moreover, we identify subgroups Γ ⊂ O(4) , Γ ⊄ SO(4) , admitting fragmentarily asymptotically stable pseudo-simple heteroclinic cycles. (It has been previously shown that for Γ ⊂ SO(4) pseudo-simple cycles generically are completely unstable.) Finally, we study a generalized heteroclinic cycle, which involves a pseudo-simple cycle as a subset.

Monte Carlo Simulations of Neutron Oil well Logging Tools

International Nuclear Information System (INIS)

Azcurra, Mario

2002-01-01

Monte Carlo simulations of simple neutron oil well logging tools into typical geological formations are presented.The simulated tools consist of both 14 MeV pulsed and continuous Am-Be neutron sources with time gated and continuous gamma ray detectors respectively.The geological formation consists of pure limestone with 15% absolute porosity in a wide range of oil saturation.The particle transport was performed with the Monte Carlo N-Particle Transport Code System, MCNP-4B.Several gamma ray spectra were obtained at the detector position that allow to perform composition analysis of the formation.In particular, the ratio C/O was analyzed as an indicator of oil saturation.Further calculations are proposed to simulate actual detector responses in order to contribute to understand the relation between the detector response with the formation composition

Monte Carlo simulations of neutron oil well logging tools

International Nuclear Information System (INIS)

Azcurra, Mario O.; Zamonsky, Oscar M.

2003-01-01

Monte Carlo simulations of simple neutron oil well logging tools into typical geological formations are presented. The simulated tools consist of both 14 MeV pulsed and continuous Am-Be neutron sources with time gated and continuous gamma ray detectors respectively. The geological formation consists of pure limestone with 15% absolute porosity in a wide range of oil saturation. The particle transport was performed with the Monte Carlo N-Particle Transport Code System, MCNP-4B. Several gamma ray spectra were obtained at the detector position that allow to perform composition analysis of the formation. In particular, the ratio C/O was analyzed as an indicator of oil saturation. Further calculations are proposed to simulate actual detector responses in order to contribute to understand the relation between the detector response with the formation composition. (author)

Global-Scale Hydrology: Simple Characterization of Complex Simulation

Science.gov (United States)

Koster, Randal D.

1999-01-01

Atmospheric general circulation models (AGCMS) are unique and valuable tools for the analysis of large-scale hydrology. AGCM simulations of climate provide tremendous amounts of hydrological data with a spatial and temporal coverage unmatched by observation systems. To the extent that the AGCM behaves realistically, these data can shed light on the nature of the real world's hydrological cycle. In the first part of the seminar, I will describe the hydrological cycle in a typical AGCM, with some emphasis on the validation of simulated precipitation against observations. The second part of the seminar will focus on a key goal in large-scale hydrology studies, namely the identification of simple, overarching controls on hydrological behavior hidden amidst the tremendous amounts of data produced by the highly complex AGCM parameterizations. In particular, I will show that a simple 50-year-old climatological relation (and a recent extension we made to it) successfully predicts, to first order, both the annual mean and the interannual variability of simulated evaporation and runoff fluxes. The seminar will conclude with an example of a practical application of global hydrology studies. The accurate prediction of weather statistics several months in advance would have tremendous societal benefits, and conventional wisdom today points at the use of coupled ocean-atmosphere-land models for such seasonal-to-interannual prediction. Understanding the hydrological cycle in AGCMs is critical to establishing the potential for such prediction. Our own studies show, among other things, that soil moisture retention can lead to significant precipitation predictability in many midlatitude and tropical regions.

STUDYING STUDENT BEHAVIOR AND CHEMISTRY SKILL USING BROWSER-BASED TOOLS AND EYE-TRACKING HARDWARE

Directory of Open Access Journals (Sweden)

Norbert J. Pienta

Full Text Available Browser-based tools were created to collect quantitative data about university student problem-solving skills. Three of these tools have been described: a word question tool that creates ideal gas law and stoichiometry questions using a set of complexity factors; a Lewis structure drawing tool that enables the user to draw a solution to an ion or molecule assigned to them; and a "spheres" tool that uses spheres to represent atoms and molecules to denote the particulate nature of matter. Results from these studies show that relatively simple questions can be made very complex by the addition of many complexity factors that challenge the cognitive skills. The drawing tools can be used for instruction or to collect data about student understanding; the outcomes suggest that students with more instruction in chemistry are more successful but even the performance of students after four semesters is somewhat disappointing. Eye-tracking hardware enabled the study of the student use of the visual interface of the other tools and to study molecular representation or interpret spectral data.

The use of magnetic susceptibility as a forensic search tool.

Science.gov (United States)

Pringle, Jamie K; Giubertoni, Matteo; Cassidy, Nigel J; Wisniewski, Kristopher D; Hansen, James D; Linford, Neil T; Daniels, Rebecca M

2015-01-01

There are various techniques available for forensic search teams to employ to successfully detect a buried object. Near-surface geophysical search methods have been dominated by ground penetrating radar but recently other techniques, such as electrical resistivity, have become more common. This paper discusses magnetic susceptibility as a simple surface search tool illustrated by various research studies. These suggest magnetic susceptibility to be a relatively low cost, quick and effective tool, compared to other geophysical methods, to determine disturbed ground above buried objects and burnt surface remains in a variety of soil types. Further research should collect datasets over objects of known burial ages for comparison purposes and used in forensic search cases to validate the technique. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Design and usability of heuristic-based deliberation tools for women facing amniocentesis.

Science.gov (United States)

Durand, Marie-Anne; Wegwarth, Odette; Boivin, Jacky; Elwyn, Glyn

2012-03-01

Evidence suggests that in decision contexts characterized by uncertainty and time constraints (e.g. health-care decisions), fast and frugal decision-making strategies (heuristics) may perform better than complex rules of reasoning. To examine whether it is possible to design deliberation components in decision support interventions using simple models (fast and frugal heuristics). The 'Take The Best' heuristic (i.e. selection of a 'most important reason') and 'The Tallying' integration algorithm (i.e. unitary weighing of pros and cons) were used to develop two deliberation components embedded in a Web-based decision support intervention for women facing amniocentesis testing. Ten researchers (recruited from 15), nine health-care providers (recruited from 28) and ten pregnant women (recruited from 14) who had recently been offered amniocentesis testing appraised evolving versions of 'your most important reason' (Take The Best) and 'weighing it up' (Tallying). Most researchers found the tools useful in facilitating decision making although emphasized the need for simple instructions and clear layouts. Health-care providers however expressed concerns regarding the usability and clarity of the tools. By contrast, 7 out of 10 pregnant women found the tools useful in weighing up the pros and cons of each option, helpful in structuring and clarifying their thoughts and visualizing their decision efforts. Several pregnant women felt that 'weighing it up' and 'your most important reason' were not appropriate when facing such a difficult and emotional decision. Theoretical approaches based on fast and frugal heuristics can be used to develop deliberation tools that provide helpful support to patients facing real-world decisions about amniocentesis. © 2011 Blackwell Publishing Ltd.

CSS Preprocessing: Tools and Automation Techniques

Directory of Open Access Journals (Sweden)

Ricardo Queirós

2018-01-01

Full Text Available Cascading Style Sheets (CSS is a W3C specification for a style sheet language used for describing the presentation of a document written in a markup language, more precisely, for styling Web documents. However, in the last few years, the landscape for CSS development has changed dramatically with the appearance of several languages and tools aiming to help developers build clean, modular and performance-aware CSS. These new approaches give developers mechanisms to preprocess CSS rules through the use of programming constructs, defined as CSS preprocessors, with the ultimate goal to bring those missing constructs to the CSS realm and to foster stylesheets structured programming. At the same time, a new set of tools appeared, defined as postprocessors, for extension and automation purposes covering a broad set of features ranging from identifying unused and duplicate code to applying vendor prefixes. With all these tools and techniques in hands, developers need to provide a consistent workflow to foster CSS modular coding. This paper aims to present an introductory survey on the CSS processors. The survey gathers information on a specific set of processors, categorizes them and compares their features regarding a set of predefined criteria such as: maturity, coverage and performance. Finally, we propose a basic set of best practices in order to setup a simple and pragmatic styling code workflow.

Clusters in simple fluids

International Nuclear Information System (INIS)

Sator, N.

2003-01-01

This article concerns the correspondence between thermodynamics and the morphology of simple fluids in terms of clusters. Definitions of clusters providing a geometric interpretation of the liquid-gas phase transition are reviewed with an eye to establishing their physical relevance. The author emphasizes their main features and basic hypotheses, and shows how these definitions lead to a recent approach based on self-bound clusters. Although theoretical, this tutorial review is also addressed to readers interested in experimental aspects of clustering in simple fluids

A simple electron multiplexer

International Nuclear Information System (INIS)

Dobrzynski, L; Akjouj, A; Djafari-Rouhani, B; Al-Wahsh, H; Zielinski, P

2003-01-01

We present a simple multiplexing device made of two atomic chains coupled by two other transition metal atoms. We show that this simple atomic device can transfer electrons at a given energy from one wire to the other, leaving all other electron states unaffected. Closed-form relations between the transmission coefficients and the inter-atomic distances are given to optimize the desired directional electron ejection. Such devices can be adsorbed on insulating substrates and characterized by current surface technologies. (letter to the editor)

Prototyping Tool for Web-Based Multiuser Online Role-Playing Game

Science.gov (United States)

Okamoto, Shusuke; Kamada, Masaru; Yonekura, Tatsuhiro

This letter proposes a prototyping tool for Web-based Multiuser Online Role-Playing Game (MORPG). The design goal is to make this tool simple and powerful. The tool is comprised of a GUI editor, a translator and a runtime environment. The GUI editor is used to edit state-transition diagrams, each of which defines the behavior of the fictional characters. The state-transition diagrams are translated into C program codes, which plays the role of a game engine in RPG system. The runtime environment includes PHP, JavaScript with Ajax and HTML. So the prototype system can be played on the usual Web browser, such as Fire-fox, Safari and IE. On a click or key press by a player, the Web browser sends it to the Web server to reflect its consequence on the screens which other players are looking at. Prospected users of this tool include programming novices and schoolchildren. The knowledge or skill of any specific programming languages is not required to create state-transition diagrams. Its structure is not only suitable for the definition of a character behavior but also intuitive to help novices understand. Therefore, the users can easily create Web-based MORPG system with the tool.

A simple and sensitive method for the determination of fibric acids in the liver by liquid chromatography.

Science.gov (United States)

Karahashi, Minako; Fukuhara, Hiroto; Hoshina, Miki; Sakamoto, Takeshi; Yamazaki, Tohru; Mitsumoto, Atsushi; Kawashima, Yoichi; Kudo, Naomi

2014-01-01

Fibrates are used in biochemical and pharmacological studies as bioactive tools. Nevertheless, most studies have lacked information concerning the concentrations of fibric acids working inside tissues because a simple and sensitive method is not available for their quantitation. This study aimed to develop a simple and sensitive bioanalytical method for the quantitation of clofibric, bezafibric and fenofibric acids in samples of very small portions of tissues. Fibric acids were extracted into n-hexane-ethyl acetate from tissue homogenates (10 mg of liver, kidney or muscle) or serum (100 µL) and were derivatized with 4-bromomethyl-6,7-dimethoxycoumarin, followed by HPLC with fluorescence detection. These compounds were separated isocratically on a reversed phase with acetonitrile-water. Standard analytical curves were linear over the concentration range of 0.2-20 nmol/10 mg of liver. Precision and accuracy were within acceptable limits. Recovery from liver homogenates ranged from 93.03 to 112.29%. This method enabled the quantitation of fibric acids in 10 mg of liver from rats treated with clofibric acid, bezafibric acid or fenofibrate. From these analytical data, it became clear that there was no large difference in ratio of acyl-CoA oxidase 1 (Acox1) mRNA level to fibric acid content in the liver among the three fibric acids, suggesting that these three fibric acids have similar potency to increase expression of the Acox1 gene, which is a target of peroxisome proliferator-activated receptor α. Thus, the proposed method is a simple, sensitive and reliable tool for the quantitation of fibric acids working in vivo inside livers.

IEEE 802.11 Networks: A Simple Model Geared Towards Offloading Studies and Considerations on Future Small Cells

DEFF Research Database (Denmark)

Garcia, Luis Guilherme Uzeda; Rodriguez, Ignacio; Catania, Davide

2013-01-01

WiFi is the prevalent wireless access technology in local area deployments and is expected to play a major role in a mobile operator’s data offloading strategy. As a result, having simple tools that are able to assess the offloading potential of IEEE 802.11 networks is vital. In this paper, we...... propose a simple closed-form solution to calculate down- and uplink throughput values per user under full-buffer traffic when small WiFi cells are used to offload macrocells. Extensive measurement campaigns and simulation results demonstrate that there is an excellent quantitative match between analytical...... model and data despite the simplicity of the former. Finally, in light of our observations we discuss some of the fundamental technological limitations that may have a significant impact on the future of small cells....

Active ultrasound pattern injection system (AUSPIS for interventional tool guidance.

Directory of Open Access Journals (Sweden)

Xiaoyu Guo

Full Text Available Accurate tool tracking is a crucial task that directly affects the safety and effectiveness of many interventional medical procedures. Compared to CT and MRI, ultrasound-based tool tracking has many advantages, including low cost, safety, mobility and ease of use. However, surgical tools are poorly visualized in conventional ultrasound images, thus preventing effective tool tracking and guidance. Existing tracking methods have not yet provided a solution that effectively solves the tool visualization and mid-plane localization accuracy problem and fully meets the clinical requirements. In this paper, we present an active ultrasound tracking and guiding system for interventional tools. The main principle of this system is to establish a bi-directional ultrasound communication between the interventional tool and US imaging machine within the tissue. This method enables the interventional tool to generate an active ultrasound field over the original imaging ultrasound signals. By controlling the timing and amplitude of the active ultrasound field, a virtual pattern can be directly injected into the US machine B mode display. In this work, we introduce the time and frequency modulation, mid-plane detection, and arbitrary pattern injection methods. The implementation of these methods further improves the target visualization and guiding accuracy, and expands the system application beyond simple tool tracking. We performed ex vitro and in vivo experiments, showing significant improvements of tool visualization and accurate localization using different US imaging platforms. An ultrasound image mid-plane detection accuracy of ±0.3 mm and a detectable tissue depth over 8.5 cm was achieved in the experiment. The system performance is tested under different configurations and system parameters. We also report the first experiment of arbitrary pattern injection to the B mode image and its application in accurate tool tracking.

GPS for QSP: A Summary of the ACoP6 Symposium on Quantitative Systems Pharmacology and a Stage for Near‐Term Efforts in the Field

Science.gov (United States)

Musante, CJ; Abernethy, DR; Allerheiligen, SR; Lauffenburger, DA

2016-01-01

Quantitative Systems Pharmacology (QSP) is experiencing increased application in the drug discovery and development process. Like its older sibling, systems biology, the QSP field is comprised of a mix of established disciplines and methods, from molecular biology to engineering to pharmacometrics.1 As a result, there exist critical segments of the discipline that differ dramatically in approach and a need to bring these groups together toward a common goal. PMID:27639191

PASTEC: an automatic transposable element classification tool.

Directory of Open Access Journals (Sweden)

Claire Hoede

Full Text Available SUMMARY: The classification of transposable elements (TEs is key step towards deciphering their potential impact on the genome. However, this process is often based on manual sequence inspection by TE experts. With the wealth of genomic sequences now available, this task requires automation, making it accessible to most scientists. We propose a new tool, PASTEC, which classifies TEs by searching for structural features and similarities. This tool outperforms currently available software for TE classification. The main innovation of PASTEC is the search for HMM profiles, which is useful for inferring the classification of unknown TE on the basis of conserved functional domains of the proteins. In addition, PASTEC is the only tool providing an exhaustive spectrum of possible classifications to the order level of the Wicker hierarchical TE classification system. It can also automatically classify other repeated elements, such as SSR (Simple Sequence Repeats, rDNA or potential repeated host genes. Finally, the output of this new tool is designed to facilitate manual curation by providing to biologists with all the evidence accumulated for each TE consensus. AVAILABILITY: PASTEC is available as a REPET module or standalone software (http://urgi.versailles.inra.fr/download/repet/REPET_linux-x64-2.2.tar.gz. It requires a Unix-like system. There are two standalone versions: one of which is parallelized (requiring Sun grid Engine or Torque, and the other of which is not.

ThManager: An Open Source Tool for Creating and Visualizing SKOS

Directory of Open Access Journals (Sweden)

Javier Lacasta

2007-09-01

Full Text Available Knowledge organization systems denotes formally represented knowledge that is used within the context of digital libraries to improve data sharing and information retrieval. To increase their use, and to reuse them when possible, it is vital to manage them adequately and to provide them in a standard interchange format. Simple knowledge organization systems (SKOS seem to be the most promising representation for the type of knowledge models used in digital libraries, but there is a lack of tools that are able to properly manage it. This work presents a tool that fills this gap, facilitating their use in different environments and using SKOS as an interchange format.

MODIFIED MALLAMPATI CLASSIFICATION SCORE- A SIMPLE TOOL FOR PREDICTING TOLERANCE IN UNSEDATED OESOPHAGOGASTRODUODENOSCOPY

Directory of Open Access Journals (Sweden)

Abishek Sasidharan

2017-04-01

Full Text Available BACKGROUND 40-47% of patients poorly tolerates esophagogastroduodenoscopy (EGD. Early identification of potentially intolerant patients improve procedural success and avoid patient discomfort. Modified Mallampati Classification (MMC score is a simple scoring system used to predict difficult tracheal intubation and laryngoscope insertion. As EGD involves the same level of patient discomfort during introduction, MMC may predict EGD tolerance. MATERIALS AND METHODS 100 patients with dyspeptic symptoms and no alarm features attending our department were recruited for unsedated EGD between January and July 2012. All patients had good performance status and underlying anxiety disorder was excluded. Based on MMC, patients placed into 4 classes- I: Soft palate, fauces, pillars and uvula visible. II: Soft palate, fauces and uvula visible. III: Soft palate and base of uvula visible. IV: Soft palate not visible. They were divided into good view (class I and II and poor view (class III and IV. EGD was performed by the same consultant and MMS status assessed by two independent trained personnel. All received 2 doses of topical pharyngeal spray containing 10% lidocaine hydrochloride. Outcome measurements were gag reflex, endoscopist’s assessment and patient feedback. RESULTS Of 100 patients, 52 were males. 58 in group A and 42 in group B. Gag reflex was present in 32.7% of good view group compared to 78.6% in poor view (p<0.001. From the endoscopist’s view, good tolerability observed in 72.4% of good view group compared to 21% in poor view (p<0.001. 74.1% patient reported satisfactory feedback in good view group compared to 19% in poor view group (p<0.001. CONCLUSION MMC is a good clinical indicator for predicting tolerance in unsedated EGD.

Complexity is simple!

Science.gov (United States)

Cottrell, William; Montero, Miguel

2018-02-01

In this note we investigate the role of Lloyd's computational bound in holographic complexity. Our goal is to translate the assumptions behind Lloyd's proof into the bulk language. In particular, we discuss the distinction between orthogonalizing and `simple' gates and argue that these notions are useful for diagnosing holographic complexity. We show that large black holes constructed from series circuits necessarily employ simple gates, and thus do not satisfy Lloyd's assumptions. We also estimate the degree of parallel processing required in this case for elementary gates to orthogonalize. Finally, we show that for small black holes at fixed chemical potential, the orthogonalization condition is satisfied near the phase transition, supporting a possible argument for the Weak Gravity Conjecture first advocated in [1].

What Can We Learn from a Simple Physics-Based Earthquake Simulator?

Science.gov (United States)

Artale Harris, Pietro; Marzocchi, Warner; Melini, Daniele

2018-03-01

Physics-based earthquake simulators are becoming a popular tool to investigate on the earthquake occurrence process. So far, the development of earthquake simulators is commonly led by the approach "the more physics, the better". However, this approach may hamper the comprehension of the outcomes of the simulator; in fact, within complex models, it may be difficult to understand which physical parameters are the most relevant to the features of the seismic catalog at which we are interested. For this reason, here, we take an opposite approach and analyze the behavior of a purposely simple earthquake simulator applied to a set of California faults. The idea is that a simple simulator may be more informative than a complex one for some specific scientific objectives, because it is more understandable. Our earthquake simulator has three main components: the first one is a realistic tectonic setting, i.e., a fault data set of California; the second is the application of quantitative laws for earthquake generation on each single fault, and the last is the fault interaction modeling through the Coulomb Failure Function. The analysis of this simple simulator shows that: (1) the short-term clustering can be reproduced by a set of faults with an almost periodic behavior, which interact according to a Coulomb failure function model; (2) a long-term behavior showing supercycles of the seismic activity exists only in a markedly deterministic framework, and quickly disappears introducing a small degree of stochasticity on the recurrence of earthquakes on a fault; (3) faults that are strongly coupled in terms of Coulomb failure function model are synchronized in time only in a marked deterministic framework, and as before, such a synchronization disappears introducing a small degree of stochasticity on the recurrence of earthquakes on a fault. Overall, the results show that even in a simple and perfectly known earthquake occurrence world, introducing a small degree of

Development of a tool to recognize small airways dysfunction in asthma (SADT).

Science.gov (United States)

Schiphof-Godart, Lieke; van der Wiel, Erica; Ten Hacken, Nick H T; van den Berge, Maarten; Postma, Dirkje S; van der Molen, Thys

2014-11-22

Small airways dysfunction (SAD) contributes to the clinical expression of asthma. The identification of patients who suffer from SAD is important from a clinical perspective, as targeted therapy may improve patients' well-being and treatment efficacy. We aimed to realize the first step in the development of a simple small airways dysfunction tool (SADT) that may help to identify asthma patients having SAD. Asthma patients with and without SAD were interviewed. Patients were selected to participate in this study based on FEF50% and R5-R20 values from spirometry and impulse oscillometry respectively. Ten in depth interviews and two focus groups revealed that patients with and without SAD perceived differences in symptoms and signs, habits and health related issues. For example, patients with SAD reported to wheeze easily, were unable to breathe in deeply, mentioned more symptoms related to bronchial hyperresponsiveness, experienced more pronounced exercise-induced symptoms and more frequently had allergic respiratory symptoms after exposure to cats and birds. Based on these differences, 63 items were retained to be further explored for the SADT. The first step of the development of the SADT tool shows that there are relevant differences in signs and respiratory symptoms between asthma patients with and without SAD. The next step is to test and validate all items in order to retain the most relevant items to create a short and simple tool, which should be useful to identify asthma patients with SAD in clinical practice.

Median of patient results as a tool for assessment of analytical stability.

Science.gov (United States)

Jørgensen, Lars Mønster; Hansen, Steen Ingemann; Petersen, Per Hyltoft; Sölétormos, György

2015-06-15

In spite of the well-established external quality assessment and proficiency testing surveys of analytical quality performance in laboratory medicine, a simple tool to monitor the long-term analytical stability as a supplement to the internal control procedures is often needed. Patient data from daily internal control schemes was used for monthly appraisal of the analytical stability. This was accomplished by using the monthly medians of patient results to disclose deviations from analytical stability, and by comparing divergences with the quality specifications for allowable analytical bias based on biological variation. Seventy five percent of the twenty analytes achieved on two COBASs INTEGRA 800 instruments performed in accordance with the optimum and with the desirable specifications for bias. Patient results applied in analytical quality performance control procedures are the most reliable sources of material as they represent the genuine substance of the measurements and therefore circumvent the problems associated with non-commutable materials in external assessment. Patient medians in the monthly monitoring of analytical stability in laboratory medicine are an inexpensive, simple and reliable tool to monitor the steadiness of the analytical practice. Copyright © 2015 Elsevier B.V. All rights reserved.

Design principles of a web interface for monitoring tools

International Nuclear Information System (INIS)

Aiftimiei, C; Pra, S D; Fantinel, S; Andreozzi, S; Fattibene, E; Misurelli, G; Cuscela, G; Donvito, G; Dudhalkar, V; Maggi, G; Pierro, A

2008-01-01

A monitoring tool of a complex Grid system can gather a huge amount of information that have to be presented to the users in the most comprehensive way. Moreover different types of consumers could be interested in inspecting and analyzing different subsets of data. The main goal in designing a Web interface for the presentation of monitoring information is to organize the huge amount of data in a simple, user-friendly and usable structure. One more problem is to consider different approaches, skills and interests that all the possible categories of users have in looking for the desired information. Starting from the Information Architecture guidelines for the Web, it is possible to design Web interfaces towards a closer user experience and to deal with an advanced user interaction through the implementation of many Web standard technologies. In this paper, we will present a number of principles for the design of Web interface for monitoring tools that provide a wider, richer range of possibilities for what concerns the user interaction. These principles are based on an extensive review of the current literature in Web design and on the experience with the development of the GridICE monitoring tool. The described principles can drive the evolution of the Web interface of Grid monitoring tools

SPET/CT image co-registration in the abdomen with a simple and cost-effective tool

International Nuclear Information System (INIS)

Foerster, Gregor J.; Laumann, Christina; Nickel, Otmar; Bartenstein, Peter; Kann, Peter; Rieker, Olaf

2003-01-01

Fusion of morphology and function has been shown to improve diagnostic accuracy in many clinical circumstances. Taking this into account, a number of instruments combining computed tomography (CT) with positron emission tomography (PET) or single-photon emission tomography (SPET) are appearing on the market. The aim of this study was to evaluate a simple and cost-effective approach to generate fusion images of similar quality. For the evaluation of the proposed approach, patients with neuroendocrine abdominal tumours with liver metastases were chosen, since the exact superimposition in the abdomen is more difficult than in other regions. Five hours following the injection of 110 MBq 111 In-DTPA-octreotide, patients were fixed in a vacuum cushion (MED-TEC, Vac-Loc) and investigated with helical CT in a mid-inspiration position (n=14). Directly following the CT, a SPET study (SPET1) of the abdominal region was performed without changing the position of the patient. A second SPET study (SPET2), 24 h p.i., was acquired after repositioning the patient in his or her individually moulded vacuum cushion. A total of nine markers suitable for imaging with CT and SPET were fixed on the cushion. Datasets were fused by means of internal landmarks (e.g. metastases or margin of abdominal organs) or by the external markers. Image fusion using external markers was fast and easy to handle compared with the use of internal landmarks. Using this technique, all lesions detectable by SPET (n=28) appeared exactly superpositioned on the respective CT morphology by visual inspection. Image fusion of CT/SPET1 and CT/SPET2 showed a mean deviation of the external markers that in the former case was smaller than the voxel size of 4.67 mm: 4.17±0.61 (CT/SPET1; ±SD) and 5.52±1.56 mm (CT/SPET2), respectively. Using internal landmarks, the mean deviation of the chosen landmarks was 6.47±1.37 and 7.78±1.21 mm. Vector subtraction of corresponding anatomical points of the CT and the re

A simple and highly efficient Agrobacterium-mediated transformation protocol for Setaria viridis

Directory of Open Access Journals (Sweden)

Polyana Kelly Martins

2015-06-01

Full Text Available The production and use of sugarcane in Brazil is very important for bioenergy production and is recognized as one of the most efficient in the world. In our laboratory, Setaria viridis is being tested as a model plant for sugarcane. S. viridis has biological attributes (rapid life cycle, small genome, diploid, short stature and simple growth requirements that make it suitable for use as a model system. We report a highly efficient protocol for Agrobacterium-mediated genetic transformation of S. viridis. The optimization of several steps in tissue culture allowed the rapid regeneration of plants and increased the rate of transformation up to 29%. This protocol could become a powerful tool for functional genomics in sugarcane.

SAMP, the Simple Application Messaging Protocol: Letting applications talk to each other

Science.gov (United States)

Taylor, M. B.; Boch, T.; Taylor, J.

2015-06-01

SAMP, the Simple Application Messaging Protocol, is a hub-based communication standard for the exchange of data and control between participating client applications. It has been developed within the context of the Virtual Observatory with the aim of enabling specialised data analysis tools to cooperate as a loosely integrated suite, and is now in use by many and varied desktop and web-based applications dealing with astronomical data. This paper reviews the requirements and design principles that led to SAMP's specification, provides a high-level description of the protocol, and discusses some of its common and possible future usage patterns, with particular attention to those factors that have aided its success in practice.

8 CFR 293.3 - Simple interest table.

Science.gov (United States)

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Simple interest table. 293.3 Section 293.3 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS DEPOSIT OF AND INTEREST ON CASH RECEIVED TO SECURE IMMIGRATION BONDS § 293.3 Simple interest table. Following is a simple interest...

Galaxy tools and workflows for sequence analysis with applications in molecular plant pathology.

Science.gov (United States)

Cock, Peter J A; Grüning, Björn A; Paszkiewicz, Konrad; Pritchard, Leighton

2013-01-01

The Galaxy Project offers the popular web browser-based platform Galaxy for running bioinformatics tools and constructing simple workflows. Here, we present a broad collection of additional Galaxy tools for large scale analysis of gene and protein sequences. The motivating research theme is the identification of specific genes of interest in a range of non-model organisms, and our central example is the identification and prediction of "effector" proteins produced by plant pathogens in order to manipulate their host plant. This functional annotation of a pathogen's predicted capacity for virulence is a key step in translating sequence data into potential applications in plant pathology. This collection includes novel tools, and widely-used third-party tools such as NCBI BLAST+ wrapped for use within Galaxy. Individual bioinformatics software tools are typically available separately as standalone packages, or in online browser-based form. The Galaxy framework enables the user to combine these and other tools to automate organism scale analyses as workflows, without demanding familiarity with command line tools and scripting. Workflows created using Galaxy can be saved and are reusable, so may be distributed within and between research groups, facilitating the construction of a set of standardised, reusable bioinformatic protocols. The Galaxy tools and workflows described in this manuscript are open source and freely available from the Galaxy Tool Shed (http://usegalaxy.org/toolshed or http://toolshed.g2.bx.psu.edu).

Early visual analysis tool using magnetoencephalography for treatment and recovery of neuronal dysfunction.

Science.gov (United States)

Rasheed, Waqas; Neoh, Yee Yik; Bin Hamid, Nor Hisham; Reza, Faruque; Idris, Zamzuri; Tang, Tong Boon

2017-10-01

Functional neuroimaging modalities play an important role in deciding the diagnosis and course of treatment of neuronal dysfunction and degeneration. This article presents an analytical tool with visualization by exploiting the strengths of the MEG (magnetoencephalographic) neuroimaging technique. The tool automates MEG data import (in tSSS format), channel information extraction, time/frequency decomposition, and circular graph visualization (connectogram) for simple result inspection. For advanced users, the tool also provides magnitude squared coherence (MSC) values allowing personalized threshold levels, and the computation of default model from MEG data of control population. Default model obtained from healthy population data serves as a useful benchmark to diagnose and monitor neuronal recovery during treatment. The proposed tool further provides optional labels with international 10-10 system nomenclature in order to facilitate comparison studies with EEG (electroencephalography) sensor space. Potential applications in epilepsy and traumatic brain injury studies are also discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Chemical Risk Assessment Screening Tool of a Global Chemical Company

Directory of Open Access Journals (Sweden)

Evelyn Tjoe-Nij

2018-03-01

Full Text Available Background: This paper describes a simple-to-use and reliable screening tool called Critical Task Exposure Screening (CTES, developed by a chemical company. The tool assesses if the exposure to a chemical for a task is likely to be within acceptable levels. Methods: CTES is a Microsoft Excel tool, where the inhalation risk score is calculated by relating the exposure estimate to the corresponding occupational exposure limit (OEL or occupational exposure band (OEB. The inhalation exposure is estimated for tasks by preassigned ART1.5 activity classes and modifying factors. Results: CTES requires few inputs. The toxicological data, including OELs, OEBs, and vapor pressure are read from a database. Once the substance is selected, the user specifies its concentration and then chooses the task description and its duration. CTES has three outputs that may trigger follow-up: (1 inhalation risk score; (2 identification of the skin hazard with the skin warnings for local and systemic adverse effects; and (3 status for carcinogenic, mutagenic, or reprotoxic effects. Conclusion: The tool provides an effective way to rapidly screen low-concern tasks, and quickly identifies certain tasks involving substances that will need further review with, nevertheless, the appropriate conservatism. This tool shows that the higher-tier ART1.5 inhalation exposure assessment model can be included effectively in a screening tool. After 2 years of worldwide extensive use within the company, CTES is well perceived by the users, including the shop floor management, and it fulfills its target of screening tool. Keywords: occupational exposure, risk assessment, risk management

Intuitive Tools for the Design and Analysis of Communication Payloads for Satellites

Science.gov (United States)

Culver, Michael R.; Soong, Christine; Warner, Joseph D.

2014-01-01

In an effort to make future communications satellite payload design more efficient and accessible, two tools were created with intuitive graphical user interfaces (GUIs). The first tool allows payload designers to graphically design their payload by using simple drag and drop of payload components onto a design area within the program. Information about each picked component is pulled from a database of common space-qualified communication components sold by commerical companies. Once a design is completed, various reports can be generated, such as the Master Equipment List. The second tool is a link budget calculator designed specifically for ease of use. Other features of this tool include being able to access a database of NASA ground based apertures for near Earth and Deep Space communication, the Tracking and Data Relay Satellite System (TDRSS) base apertures, and information about the solar system relevant to link budget calculations. The link budget tool allows for over 50 different combinations of user inputs, eliminating the need for multiple spreadsheets and the user errors associated with using them. Both of the aforementioned tools increase the productivity of space communication systems designers, and have the colloquial latitude to allow non-communication experts to design preliminary communication payloads.

An open source GIS-based tool to integrate the fragmentation mechanism in rockfall propagation

Science.gov (United States)

Matas, Gerard; Lantada, Nieves; Gili, Josep A.; Corominas, Jordi

2015-04-01

Rockfalls are frequent instability processes in road cuts, open pit mines and quarries, steep slopes and cliffs. Even though the stability of rock slopes can be determined using analytical approaches, the assessment of large rock cliffs require simplifying assumptions due to the difficulty of working with a large amount of joints, the scattering of both the orientations and strength parameters. The attitude and persistency of joints within the rock mass define the size of kinematically unstable rock volumes. Furthermore the rock block will eventually split in several fragments during its propagation downhill due its impact with the ground surface. Knowledge of the size, energy, trajectory… of each block resulting from fragmentation is critical in determining the vulnerability of buildings and protection structures. The objective of this contribution is to present a simple and open source tool to simulate the fragmentation mechanism in rockfall propagation models and in the calculation of impact energies. This tool includes common modes of motion for falling boulders based on the previous literature. The final tool is being implemented in a GIS (Geographic Information Systems) using open source Python programming. The tool under development will be simple, modular, compatible with any GIS environment, open source, able to model rockfalls phenomena correctly. It could be used in any area susceptible to rockfalls with a previous adjustment of the parameters. After the adjustment of the model parameters to a given area, a simulation could be performed to obtain maps of kinetic energy, frequency, stopping density and passing heights. This GIS-based tool and the analysis of the fragmentation laws using data collected from recent rockfall have being developed within the RockRisk Project (2014-2016). This project is funded by the Spanish Ministerio de Economía y Competitividad and entitled "Rockfalls in cliffs: risk quantification and its prevention"(BIA2013-42582-P).

Machining of high performance workpiece materials with CBN coated cutting tools

International Nuclear Information System (INIS)

Uhlmann, E.; Fuentes, J.A. Oyanedel; Keunecke, M.

2009-01-01

The machining of high performance workpiece materials requires significantly harder cutting materials. In hard machining, the early tool wear occurs due to high process forces and temperatures. The hardest known material is the diamond, but steel materials cannot be machined with diamond tools because of the reactivity of iron with carbon. Cubic boron nitride (cBN) is the second hardest of all known materials. The supply of such PcBN indexable inserts, which are only geometrically simple and available, requires several work procedures and is cost-intensive. The development of a cBN coating for cutting tools, combine the advantages of a thin film system and of cBN. Flexible cemented carbide tools, in respect to the geometry can be coated. The cBN films with a thickness of up to 2 μm on cemented carbide substrates show excellent mechanical and physical properties. This paper describes the results of the machining of various workpiece materials in turning and milling operations regarding the tool life, resultant cutting force components and workpiece surface roughness. In turning tests of Inconel 718 and milling tests of chrome steel the high potential of cBN coatings for dry machining was proven. The results of the experiments were compared with common used tool coatings for the hard machining. Additionally, the wear mechanisms adhesion, abrasion, surface fatigue and tribo-oxidation were researched in model wear experiments.

Excel 2010 Made Simple

CERN Document Server

Katz, Abbott

2011-01-01

Get the most out of Excel 2010 with Excel 2010 Made Simple - learn the key features, understand what's new, and utilize dozens of time-saving tips and tricks to get your job done. Over 500 screen visuals and clear-cut instructions guide you through the features of Excel 2010, from formulas and charts to navigating around a worksheet and understanding Visual Basic for Applications (VBA) and macros. Excel 2010 Made Simple takes a practical and highly effective approach to using Excel 2010, showing you the best way to complete your most common spreadsheet tasks. You'll learn how to input, format,

A motion-planning method for dexterous hand operating a tool based on bionic analysis

Directory of Open Access Journals (Sweden)

Wei Bo

2017-01-01

Full Text Available In order to meet the needs of robot’s operating tools for different types and sizes, the dexterous hand is studied by many scientific research institutions. However, the large number of joints in a dexterous hand leads to the difficulty of motion planning. Aiming at this problem, this paper proposes a planning method abased on BPNN inspired by human hands. Firstly, this paper analyses the structure and function of the human hand and summarizes its typical strategy of operation. Secondly, based on the manual operation strategy, the tools are classified according to the shape and the operation mode of the dexterous hand is presented. Thirdly, the BPNN is used to train the humanoid operation, and then output the operation plan. Finally, the simulating experiments of grasping simple tools and operating complex tools are made by MATLAB and ADAMS. The simulation verifies the effectiveness of this method.

Developing GIS based decision-making tools in case of radiological contamination of agricultural soil

International Nuclear Information System (INIS)

Kepka, Pavel; Brom, Jakub; Prochazka, Jan; Vincikova, Hana; Pecharova, Emilie

2010-01-01

A set of supporting tools to help take remedial decisions in case of radiological contamination of agricultural produce is being developed within the EURANOS project. The tools are created in the ArcGIS environment in the Python programming language. So far, a simple model to estimate biomass in the contaminated area has been set up. This module will make it possible to estimate additional parameters, such as activity per kg or amount of waste created, which are useful when taking decision regarding premature crops harvesting. Areas where no remedial action is required can be also identified, of course

NVU perspective on simple liquids’ quasiuniversality

DEFF Research Database (Denmark)

Dyre, J. C.

2013-01-01

The last half-century of research into the structure, dynamics, and thermodynamics of simple liquids has revealed a number of approximate universalities. This paper argues that simple liquids' reduced-coordinate constant-potential-energy hypersurfaces constitute a quasiuniversal family of compact...

Computerized versus hand-scored health literacy tools: a comparison of Simple Measure of Gobbledygook (SMOG) and Flesch-Kincaid in printed patient education materials.

Science.gov (United States)

Grabeel, Kelsey Leonard; Russomanno, Jennifer; Oelschlegel, Sandy; Tester, Emily; Heidel, Robert Eric

2018-01-01

The research compared and contrasted hand-scoring and computerized methods of evaluating the grade level of patient education materials that are distributed at an academic medical center in east Tennessee and sought to determine if these materials adhered to the American Medical Association's (AMA's) recommended reading level of sixth grade. Librarians at an academic medical center located in the heart of Appalachian Tennessee initiated the assessment of 150 of the most used printed patient education materials. Based on the Flesch-Kincaid (F-K) scoring rubric, 2 of the 150 documents were excluded from statistical comparisons due to the absence of text (images only). Researchers assessed the remaining 148 documents using the hand-scored Simple Measure of Gobbledygook (SMOG) method and the computerized F-K grade level method. For SMOG, 3 independent reviewers hand-scored each of the 150 documents. For F-K, documents were analyzed using Microsoft Word. Reading grade levels scores were entered into a database for statistical analysis. Inter-rater reliability was calculated using intra-class correlation coefficients (ICC). Paired t -tests were used to compare readability means. Acceptable inter-rater reliability was found for SMOG (ICC=0.95). For the 148 documents assessed, SMOG produced a significantly higher mean reading grade level (M=9.6, SD=1.3) than F-K (M=6.5, SD=1.3; p SMOG method of assessment, 147 of the 148 documents (99.3%) scored above the AMA's recommended reading level of sixth grade. Computerized health literacy assessment tools, used by many national patient education material providers, might not be representative of the actual reading grade levels of patient education materials. This is problematic in regions like Appalachia because materials may not be comprehensible to the area's low-literacy patients. Medical librarians have the potential to advance their role in patient education to better serve their patient populations.

StAR: a simple tool for the statistical comparison of ROC curves

Directory of Open Access Journals (Sweden)

Melo Francisco

2008-06-01

Full Text Available Abstract Background As in many different areas of science and technology, most important problems in bioinformatics rely on the proper development and assessment of binary classifiers. A generalized assessment of the performance of binary classifiers is typically carried out through the analysis of their receiver operating characteristic (ROC curves. The area under the ROC curve (AUC constitutes a popular indicator of the performance of a binary classifier. However, the assessment of the statistical significance of the difference between any two classifiers based on this measure is not a straightforward task, since not many freely available tools exist. Most existing software is either not free, difficult to use or not easy to automate when a comparative assessment of the performance of many binary classifiers is intended. This constitutes the typical scenario for the optimization of parameters when developing new classifiers and also for their performance validation through the comparison to previous art. Results In this work we describe and release new software to assess the statistical significance of the observed difference between the AUCs of any two classifiers for a common task estimated from paired data or unpaired balanced data. The software is able to perform a pairwise comparison of many classifiers in a single run, without requiring any expert or advanced knowledge to use it. The software relies on a non-parametric test for the difference of the AUCs that accounts for the correlation of the ROC curves. The results are displayed graphically and can be easily customized by the user. A human-readable report is generated and the complete data resulting from the analysis are also available for download, which can be used for further analysis with other software. The software is released as a web server that can be used in any client platform and also as a standalone application for the Linux operating system. Conclusion A new software for

Millifluidics as a simple tool to optimize droplet networks: Case study on drop traffic in a bifurcated loop

Science.gov (United States)

Wang, William S.; Vanapalli, Siva A.

2014-01-01

We report that modular millifluidic networks are simpler, more cost-effective alternatives to traditional microfluidic networks, and they can be rapidly generated and altered to optimize designs. Droplet traffic can also be studied more conveniently and inexpensively at the millimeter scale, as droplets are readily visible to the naked eye. Bifurcated loops, ladder networks, and parking networks were made using only Tygon® tubing and plastic T-junction fittings and visualized using an iPod® camera. As a case study, droplet traffic experiments through a millifluidic bifurcated loop were conducted, and the periodicity of drop spacing at the outlet was mapped over a wide range of inlet drop spacing. We observed periodic, intermittent, and aperiodic behaviors depending on the inlet drop spacing. The experimentally observed periodic behaviors were in good agreement with numerical simulations based on the simple network model. Our experiments further identified three main sources of intermittency between different periodic and/or aperiodic behaviors: (1) simultaneous entering and exiting events, (2) channel defects, and (3) equal or nearly equal hydrodynamic resistances in both sides of the bifurcated loop. In cases of simultaneous events and/or channel defects, the range of input spacings where intermittent behaviors are observed depends on the degree of inherent variation in input spacing. Finally, using a time scale analysis of syringe pump fluctuations and experiment observation times, we find that in most cases, more consistent results can be generated in experiments conducted at the millimeter scale than those conducted at the micrometer scale. Thus, millifluidic networks offer a simple means to probe collective interactions due to drop traffic and optimize network geometry to engineer passive devices for biological and material analysis. PMID:25553188

Use of simple finite elements for mechanical systems impact analysis based on stereomechanics, stress wave propagation, and energy method approaches

International Nuclear Information System (INIS)

McCoy, Michael L.; Moradi, Rasoul; Lankarani, Hamid M.

2011-01-01

This paper examines the effectiveness of analyzing impact events in mechanical systems for design purposes using simple or low ordered finite elements. Traditional impact dynamics analyses of mechanical systems namely stereomechanics, energy method, stress-wave propagation and contact mechanics approaches are limited to very simplified geometries and provide basic analyses in making predictions and understanding the dominant features of the impact in a mechanical system. In engineering practice, impacted systems present a complexity of geometry, stiffness, mass distributions, contact areas and impact angles that are impossible to analyze and design with the traditional impact dynamics methods. In real cases, the effective tool is the finite element (FE) method. The high-end FEA codes though may be not available for typical engineer/designer. This paper provides information on whether impact events of mechanical systems can be successfully modeled using simple or low-order finite elements. FEA models using simple elements are benchmarked against theoretical impact problems and published experimental impact results. As a case study, an FE model using simple plastic beam elements is further tested to predict stresses and deflections in an experimental structural impact

SIRW: A web server for the Simple Indexing and Retrieval System that combines sequence motif searches with keyword searches.

Science.gov (United States)

Ramu, Chenna

2003-07-01

SIRW (http://sirw.embl.de/) is a World Wide Web interface to the Simple Indexing and Retrieval System (SIR) that is capable of parsing and indexing various flat file databases. In addition it provides a framework for doing sequence analysis (e.g. motif pattern searches) for selected biological sequences through keyword search. SIRW is an ideal tool for the bioinformatics community for searching as well as analyzing biological sequences of interest.

jSPyDB, an open source database-independent tool for data management

CERN Document Server

Pierro, Giuseppe Antonio

2010-01-01

Nowadays, the number of commercial tools available for accessing Databases, built on Java or .Net, is increasing. However, many of these applications have several drawbacks: usually they are not open-source, they provide interfaces only with a specific kind of database, they are platform-dependent and very CPU and memory consuming. jSPyDB is a free web based tool written using Python and Javascript. It relies on jQuery and python libraries, and is intended to provide a simple handler to different Database technologies inside a local web browser. Such a tool, exploiting fast access libraries such as SQLAlchemy, is easy to install, and to configure. The design of this tool envisages three layers. The front-end client side in the local web browser communicates with a backend server. Only the server is able to connect to the different databases for the purposes of performing data definition and manipulation. The server makes the data available to the client, so that the user can display and handle them safely. ...

A Web tool for calculating k0-NAA uncertainties

International Nuclear Information System (INIS)

Younes, N.; Robouch, P.

2003-01-01

The calculation of uncertainty budgets is becoming a standard step in reporting analytical results. This gives rise to the need for simple, easily accessed tools to calculate uncertainty budgets. An example of such a tool is the Excel spreadsheet approach of Robouch et al. An internet application which calculates uncertainty budgets for k 0 -NAA is presented. The Web application has built in 'Literature' values for standard isotopes and accepts as inputs fixed information such as the thermal to epithermal neutron flux ratio, as well as experiment specific data such as the mass of the sample. The application calculates and displays intermediate uncertainties as well as the final combined uncertainty of the element concentration in the sample. The interface only requires access to a standard browser and is thus easily accessible to researchers and laboratories. This may facilitate and standardize the calculation of k 0 -NAA uncertainty budgets. (author)

Utility of the heteroduplex assay (HDA) as a simple and cost-effective tool for the identification of HIV type 1 dual infections in resource-limited settings.

Science.gov (United States)

Powell, Rebecca L R; Urbanski, Mateusz M; Burda, Sherri; Nanfack, Aubin; Kinge, Thompson; Nyambi, Phillipe N

2008-01-01

The predominance of unique recombinant forms (URFs) of HIV-1 in Cameroon suggests that dual infection, the concomitant or sequential infection with genetically distinct HIV-1 strains, occurs frequently in this region; yet, identifying dual infection among large HIV cohorts in local, resource-limited settings is uncommon, since this generally relies on labor-intensive and costly sequencing methods. Consequently, there is a need to develop an effective, cost-efficient method appropriate to the developing world to identify these infections. In the present study, the heteroduplex assay (HDA) was used to verify dual or single infection status, as shown by traditional sequence analysis, for 15 longitudinally sampled study subjects from Cameroon. Heteroduplex formation, indicative of a dual infection, was identified for all five study subjects shown by sequence analysis to be dually infected. Conversely, heteroduplex formation was not detectable for all 10 HDA reactions of the singly infected study subjects. These results suggest that the HDA is a simple yet powerful and inexpensive tool for the detection of both intersubtype and intrasubtype dual infections, and that the HDA harbors significant potential for reliable, high-throughput screening for dual infection. As these infections and the recombinants they generate facilitate leaps in HIV-1 evolution, and may present major challenges for treatment and vaccine design, this assay will be critical for monitoring the continuing pandemic in regions of the world where HIV-1 viral diversity is broad.

Computational Tools for RF Structure Design

CERN Document Server

Jensen, E

2004-01-01

The Finite Differences Method and the Finite Element Method are the two principally employed numerical methods in modern RF field simulation programs. The basic ideas behind these methods are explained, with regard to available simulation programs. We then go through a list of characteristic parameters of RF structures, explaining how they can be calculated using these tools. With the help of these parameters, we introduce the frequency-domain and the time-domain calculations, leading to impedances and wake-fields, respectively. Subsequently, we present some readily available computer programs, which are in use for RF structure design, stressing their distinctive features and limitations. One final example benchmarks the precision of different codes for calculating the eigenfrequency and Q of a simple cavity resonator.

Simple mathematical fireworks

International Nuclear Information System (INIS)

De Luca, R; Faella, O

2014-01-01

Mathematical fireworks are reproduced in two dimensions by means of simple notions in kinematics and Newtonian mechanics. Extension of the analysis in three dimensions is proposed and the geometric figures the falling tiny particles make on the ground after explosion are determined. (paper)

Cavilaciones sobre el interés simple

OpenAIRE

Leonor Cabeza de Vergara

2010-01-01

Como producto de las reflexiones sobre la conceptualización del interés simple surgieron dos preguntas a nivel de clase: ¿Por qué, bajo la modalidad del interés simple, el presente de cada una de las cuotas constantes vencidas no es igual al presente de la anualidad vencida?, y ¿Qué porción de una cuota vencida bajo el interés simple se asigna a interés y a capital? Para trabajar estos interrogantes se partió de un caso práctico y con el soporte conceptual de interés simple, series, serie arm...

Building an asynchronous web-based tool for machine learning classification.

Science.gov (United States)

Weber, Griffin; Vinterbo, Staal; Ohno-Machado, Lucila

2002-01-01

Various unsupervised and supervised learning methods including support vector machines, classification trees, linear discriminant analysis and nearest neighbor classifiers have been used to classify high-throughput gene expression data. Simpler and more widely accepted statistical tools have not yet been used for this purpose, hence proper comparisons between classification methods have not been conducted. We developed free software that implements logistic regression with stepwise variable selection as a quick and simple method for initial exploration of important genetic markers in disease classification. To implement the algorithm and allow our collaborators in remote locations to evaluate and compare its results against those of other methods, we developed a user-friendly asynchronous web-based application with a minimal amount of programming using free, downloadable software tools. With this program, we show that classification using logistic regression can perform as well as other more sophisticated algorithms, and it has the advantages of being easy to interpret and reproduce. By making the tool freely and easily available, we hope to promote the comparison of classification methods. In addition, we believe our web application can be used as a model for other bioinformatics laboratories that need to develop web-based analysis tools in a short amount of time and on a limited budget.

Correction tool for Active Shape Model based lumbar muscle segmentation.

Science.gov (United States)

Valenzuela, Waldo; Ferguson, Stephen J; Ignasiak, Dominika; Diserens, Gaelle; Vermathen, Peter; Boesch, Chris; Reyes, Mauricio

2015-08-01

In the clinical environment, accuracy and speed of the image segmentation process plays a key role in the analysis of pathological regions. Despite advances in anatomic image segmentation, time-effective correction tools are commonly needed to improve segmentation results. Therefore, these tools must provide faster corrections with a low number of interactions, and a user-independent solution. In this work we present a new interactive correction method for correcting the image segmentation. Given an initial segmentation and the original image, our tool provides a 2D/3D environment, that enables 3D shape correction through simple 2D interactions. Our scheme is based on direct manipulation of free form deformation adapted to a 2D environment. This approach enables an intuitive and natural correction of 3D segmentation results. The developed method has been implemented into a software tool and has been evaluated for the task of lumbar muscle segmentation from Magnetic Resonance Images. Experimental results show that full segmentation correction could be performed within an average correction time of 6±4 minutes and an average of 68±37 number of interactions, while maintaining the quality of the final segmentation result within an average Dice coefficient of 0.92±0.03.

A simple rhodamine hydrazide-based turn-on fluorescent probe for HOCl detection.

Science.gov (United States)

Zhang, Zhen; Zou, Yuan; Deng, Chengquan; Meng, Liesu

2016-06-01

Hypochlorous acid (HOCl) plays a crucial role in daily life and mediates a variety of physiological processes, however, abnormal levels of HOCl have been associated with numerous human diseases. It is therefore of significant interest to establish a simple, selective, rapid and sensitive fluorogenic method for the detection of HOCl in environmental and biological samples. A hydrazide-containing fluorescent probe based on a rhodamine scaffold was facilely developed that could selectively detect HOCl over other biologically relevant reactive oxygen species, reactive nitrogen species and most common metal ions in vitro. Via an irreversible oxidation-hydrolysis mechanism, and upon HOCl-triggered opening of the intramolecular spirocyclic ring during detection, the rhodamine hydrazide-based probe exhibited large fluorescence enhancement in the emission spectra with a fast response, low detection limit and comparatively wide pH detection range in aqueous media. The probe was further successfully applied to monitoring trace HOCl in tap water and imaging both exogenous and endogenous HOCl within living cells. It is anticipated that this simple and useful probe might be an efficient tool with which to facilitate more HOCl-related chemical and biological research. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Identification of apple cultivars on the basis of simple sequence repeat markers.

Science.gov (United States)

Liu, G S; Zhang, Y G; Tao, R; Fang, J G; Dai, H Y

2014-09-12

DNA markers are useful tools that play an important role in plant cultivar identification. They are usually based on polymerase chain reaction (PCR) and include simple sequence repeats (SSRs), inter-simple sequence repeats, and random amplified polymorphic DNA. However, DNA markers were not used effectively in the complete identification of plant cultivars because of the lack of known DNA fingerprints. Recently, a novel approach called the cultivar identification diagram (CID) strategy was developed to facilitate the use of DNA markers for separate plant individuals. The CID was designed whereby a polymorphic maker was generated from each PCR that directly allowed for cultivar sample separation at each step. Therefore, it could be used to identify cultivars and varieties easily with fewer primers. In this study, 60 apple cultivars, including a few main cultivars in fields and varieties from descendants (Fuji x Telamon) were examined. Of the 20 pairs of SSR primers screened, 8 pairs gave reproducible, polymorphic DNA amplification patterns. The banding patterns obtained from these 8 primers were used to construct a CID map. Each cultivar or variety in this study was distinguished from the others completely, indicating that this method can be used for efficient cultivar identification. The result contributed to studies on germplasm resources and the seedling industry in fruit trees.

The McKesson prop--an essential tool for the emergency physician?

LENUS (Irish Health Repository)

Murphy, A P

2010-02-01

Facial trauma is a commonly encountered presentation to emergency departments. When associated airway compromise occurs, co-existing head and neck injuries serve to produce a challenging clinical situation. We describe two patients who suffered multi-system trauma, with severe maxillofacial injuries that necessitated prompt definitive airway management and mid-face stabilisation in the pre-hospital and emergency department phases of resuscitation. The McKesson prop is a simple yet highly effective tool for use in these injuries.

A new tool to evaluate postgraduate training posts: the Job Evaluation Survey Tool (JEST).

Science.gov (United States)

Wall, David; Goodyear, Helen; Singh, Baldev; Whitehouse, Andrew; Hughes, Elizabeth; Howes, Jonathan

2014-10-02

Three reports in 2013 about healthcare and patient safety in the UK, namely Berwick, Francis and Keogh have highlighted the need for junior doctors' views about their training experience to be heard. In the UK, the General Medical Council (GMC) quality assures medical training programmes and requires postgraduate deaneries to undertake quality management and monitoring of all training posts in their area. The aim of this study was to develop a simple trainee questionnaire for evaluation of postgraduate training posts based on the GMC, UK standards and to look at the reliability and validity including comparison with a well-established and internationally validated tool, the Postgraduate Hospital Educational Environment Measure (PHEEM). The Job Evaluation Survey Tool (JEST), a fifteen item job evaluation questionnaire was drawn up in 2006, piloted with Foundation doctors (2007), field tested with specialist paediatric registrars (2008) and used over a three year period (2008-11) by Foundation Doctors. Statistical analyses including descriptives, reliability, correlation and factor analysis were undertaken and JEST compared with PHEEM. The JEST had a reliability of 0.91 in the pilot study of 76 Foundation doctors, 0.88 in field testing of 173 Paediatric specialist registrars and 0.91 in three years of general use in foundation training with 3367 doctors completing JEST. Correlation of JEST with PHEEM was 0.80 (p training posts.

Revisiting Bevacizumab + Cytotoxics Scheduling Using Mathematical Modeling: Proof of Concept Study in Experimental Non-Small Cell Lung Carcinoma.

Science.gov (United States)

Imbs, Diane-Charlotte; El Cheikh, Raouf; Boyer, Arnaud; Ciccolini, Joseph; Mascaux, Céline; Lacarelle, Bruno; Barlesi, Fabrice; Barbolosi, Dominique; Benzekry, Sébastien

2018-01-01

Concomitant administration of bevacizumab and pemetrexed-cisplatin is a common treatment for advanced nonsquamous non-small cell lung cancer (NSCLC). Vascular normalization following bevacizumab administration may transiently enhance drug delivery, suggesting improved efficacy with sequential administration. To investigate optimal scheduling, we conducted a study in NSCLC-bearing mice. First, experiments demonstrated improved efficacy when using sequential vs. concomitant scheduling of bevacizumab and chemotherapy. Combining this data with a mathematical model of tumor growth under therapy accounting for the normalization effect, we predicted an optimal delay of 2.8 days between bevacizumab and chemotherapy. This prediction was confirmed experimentally, with reduced tumor growth of 38% as compared to concomitant scheduling, and prolonged survival (74 vs. 70 days). Alternate sequencing of 8 days failed in achieving a similar increase in efficacy, thus emphasizing the utility of modeling support to identify optimal scheduling. The model could also be a useful tool in the clinic to personally tailor regimen sequences. © 2017 The Authors CPT: Pharmacometrics & Systems Pharmacology published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.

Item Response Theory to Quantify Longitudinal Placebo and Paliperidone Effects on PANSS Scores in Schizophrenia.

Science.gov (United States)

Krekels, Ehj; Novakovic, A M; Vermeulen, A M; Friberg, L E; Karlsson, M O

2017-08-01

As biomarkers are lacking, multi-item questionnaire-based tools like the Positive and Negative Syndrome Scale (PANSS) are used to quantify disease severity in schizophrenia. Analyzing composite PANSS scores as continuous data discards information and violates the numerical nature of the scale. Here a longitudinal analysis based on Item Response Theory is presented using PANSS data from phase III clinical trials. Latent disease severity variables were derived from item-level data on the positive, negative, and general PANSS subscales each. On all subscales, the time course of placebo responses were best described with Weibull models, and dose-independent functions with exponential models to describe the onset of the full effect were used to describe paliperidone's effect. Placebo and drug effect were most pronounced on the positive subscale. The final model successfully describes the time course of treatment effects on the individual PANSS item-levels, on all PANSS subscale levels, and on the total score level. © 2017 The Authors CPT: Pharmacometrics & Systems Pharmacology published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.

Tool path in torus tool CNC machining

Directory of Open Access Journals (Sweden)

XU Ying

2016-10-01

Full Text Available This paper is about tool path in torus tool CNC machining.The mathematical model of torus tool is established.The tool path planning algorithm is determined through calculation of the cutter location,boundary discretization,calculation of adjacent tool path and so on,according to the conversion formula,the cutter contact point will be converted to the cutter location point and then these points fit a toolpath.Lastly,the path planning algorithm is implemented by using Matlab programming.The cutter location points for torus tool are calculated by Matlab,and then fit these points to a toolpath.While using UG software,another tool path of free surface is simulated of the same data.It is drew compared the two tool paths that using torus tool is more efficient.

AppEEARS: A Simple Tool that Eases Complex Data Integration and Visualization Challenges for Users

Science.gov (United States)

Maiersperger, T.

2017-12-01

The Application for Extracting and Exploring Analysis-Ready Samples (AppEEARS) offers a simple and efficient way to perform discovery, processing, visualization, and acquisition across large quantities and varieties of Earth science data. AppEEARS brings significant value to a very broad array of user communities by 1) significantly reducing data volumes, at-archive, based on user-defined space-time-variable subsets, 2) promoting interoperability across a wide variety of datasets via format and coordinate reference system harmonization, 3) increasing the velocity of both data analysis and insight by providing analysis-ready data packages and by allowing interactive visual exploration of those packages, and 4) ensuring veracity by making data quality measures more apparent and usable and by providing standards-based metadata and processing provenance. Development and operation of AppEEARS is led by the National Aeronautics and Space Administration (NASA) Land Processes Distributed Active Archive Center (LP DAAC). The LP DAAC also partners with several other archives to extend the capability across a larger federation of geospatial data providers. Over one hundred datasets are currently available, covering a diversity of variables including land cover, population, elevation, vegetation indices, and land surface temperature. Many hundreds of users have already used this new web-based capability to make the complex tasks of data integration and visualization much simpler and more efficient.

Simple versus complex degenerative mitral valve disease.

Science.gov (United States)

Javadikasgari, Hoda; Mihaljevic, Tomislav; Suri, Rakesh M; Svensson, Lars G; Navia, Jose L; Wang, Robert Z; Tappuni, Bassman; Lowry, Ashley M; McCurry, Kenneth R; Blackstone, Eugene H; Desai, Milind Y; Mick, Stephanie L; Gillinov, A Marc

2018-07-01

At a center where surgeons favor mitral valve (MV) repair for all subsets of leaflet prolapse, we compared results of patients undergoing repair for simple versus complex degenerative MV disease. From January 1985 to January 2016, 6153 patients underwent primary isolated MV repair for degenerative disease, 3101 patients underwent primary isolated MV repair for simple disease (posterior prolapse), and 3052 patients underwent primary isolated MV repair for complex disease (anterior or bileaflet prolapse), based on preoperative echocardiographic images. Logistic regression analysis was used to generate propensity scores for risk-adjusted comparisons (n = 2065 matched pairs). Durability was assessed by longitudinal recurrence of mitral regurgitation and reoperation. Compared with patients with simple disease, those undergoing repair of complex pathology were more likely to be younger and female (both P values < .0001) but with similar symptoms (P = .3). The most common repair technique was ring/band annuloplasty (3055/99% simple vs 3000/98% complex; P = .5), followed by leaflet resection (2802/90% simple vs 2249/74% complex; P < .0001). Among propensity-matched patients, recurrence of severe mitral regurgitation 10 years after repair was 6.2% for simple pathology versus 11% for complex pathology (P = .007), reoperation at 18 years was 6.3% for simple pathology versus 11% for complex pathology, and 20-year survival was 62% for simple pathology versus 61% for complex pathology (P = .6). Early surgical intervention has become more common in patients with degenerative MV disease, regardless of valve prolapse complexity or symptom status. Valve repair was associated with similarly low operative risk and time-related survival but less durability in complex disease. Lifelong annual echocardiographic surveillance after MV repair is recommended, particularly in patients with complex disease. Copyright © 2018 The American Association for Thoracic Surgery

Development and Testing of Tailored Tool Surfaces for Sheet Metal Forming

DEFF Research Database (Denmark)

Sulaiman, Mohd Hafis Bin

MPa. The above mentioned simple experimental procedure for determining lubricant bulk modulus gives a first rough estimate, and it is supplemented by a more advanced laboratory test based on a newly designed equipment. The lubricant compressibility experiment with a direct pressure measurement inside...... to achieve this purpose. A simple laboratory test consisting of upsetting a specially designed metal cylinder with a lubricant reservoir together with elasto-plastic, numerical modelling of the metal cylinder is carried out in order to determine the bulk modulus at low pressure regimes of approximately 100...... for the manufacturing. The SRT tools were manufactured with longitudinal, shallow pocket geometries oriented perpendicular to the sliding direction. The pockets have small angles to the workpiece surface and varying distance. The experiments show an optimum distance between the pockets to exist that creates a table...

HDF-EOS Dump Tools

Science.gov (United States)

Prasad, U.; Rahabi, A.

2001-05-01

Descriptor file (.desc) as the reference. The tool takes (.desc), and (.met) an ODL file as inputs, and generates a simple output file contains the results of the checking process.

Simple Tidal Prism Models Revisited

Science.gov (United States)

Luketina, D.

1998-01-01

Simple tidal prism models for well-mixed estuaries have been in use for some time and are discussed in most text books on estuaries. The appeal of this model is its simplicity. However, there are several flaws in the logic behind the model. These flaws are pointed out and a more theoretically correct simple tidal prism model is derived. In doing so, it is made clear which effects can, in theory, be neglected and which can not.

Dynamics and forecast in a simple model of sustainable development for rural populations.

Science.gov (United States)

Angulo, David; Angulo, Fabiola; Olivar, Gerard

2015-02-01

Society is becoming more conscious on the need to preserve the environment. Sustainable development schemes have grown rapidly as a tool for managing, predicting and improving the growth path in different regions and economy sectors. We introduce a novel and simple mathematical model of ordinary differential equations (ODEs) in order to obtain a dynamical description for each one of the sustainability components (economy, social development and environment conservation), together with their dependence with demographic dynamics. The main part in the modeling task is inspired by the works by Cobb, Douglas, Brander and Taylor. This is completed through some new insights by the authors. A model application is presented for three specific geographical rural regions in Caldas (Colombia).

Discovery Mondays: Surveyors' Tools

CERN Multimedia

2003-01-01

Surveyors of all ages, have your rulers and compasses at the ready! This sixth edition of Discovery Monday is your chance to learn about the surveyor's tools - the state of the art in measuring instruments - and see for yourself how they work. With their usual daunting precision, the members of CERN's Surveying Group have prepared some demonstrations and exercises for you to try. Find out the techniques for ensuring accelerator alignment and learn about high-tech metrology systems such as deviation indicators, tracking lasers and total stations. The surveyors will show you how they precisely measure magnet positioning, with accuracy of a few thousandths of a millimetre. You can try your hand at precision measurement using different types of sensor and a modern-day version of the Romans' bubble level, accurate to within a thousandth of a millimetre. You will learn that photogrammetry techniques can transform even a simple digital camera into a remarkable measuring instrument. Finally, you will have a chance t...

A simple water-immersion condenser for imaging living brain slices on an inverted microscope.

Science.gov (United States)

Prusky, G T

1997-09-05

Due to some physical limitations of conventional condensers, inverted compound microscopes are not optimally suited for imaging living brain slices with transmitted light. Herein is described a simple device that converts an inverted microscope into an effective tool for this application by utilizing an objective as a condenser. The device is mounted on a microscope in place of the condenser, is threaded to accept a water immersion objective, and has a slot for a differential interference contrast (DIC) slider. When combined with infrared video techniques, this device allows an inverted microscope to effectively image living cells within thick brain slices in an open perfusion chamber.

Interactions between the Real Economy and the Stock Market: A Simple Agent-Based Approach

Directory of Open Access Journals (Sweden)

Frank Westerhoff

2012-01-01

Full Text Available We develop a simple behavioral macromodel to study interactions between the real economy and the stock market. The real economy is represented by a Keynesian-type goods market approach while the setup for the stock market includes heterogeneous speculators. Using a mixture of analytical and numerical tools we find, for instance, that speculators may create endogenous boom-bust dynamics in the stock market which, by spilling over into the real economy, can cause lasting fluctuations in economic activity. However, fluctuations in economic activity may, by shaping the firms' fundamental values, also have an impact on the dynamics of the stock market.

A Simple Tiltmeter

Science.gov (United States)

Dix, M. G.; Harrison, D. R.; Edwards, T. M.

1982-01-01

Bubble vial with external aluminum-foil electrodes is sensing element for simple indicating tiltmeter. To measure bubble displacement, bridge circuit detects difference in capacitance between two sensing electrodes and reference electrode. Tiltmeter was developed for experiment on forecasting seismic events by changes in Earth's magnetic field.

Sporadic simple groups and quotient singularities

International Nuclear Information System (INIS)

Cheltsov, I A; Shramov, C A

2013-01-01

We show that if a faithful irreducible representation of a central extension of a sporadic simple group with centre contained in the commutator subgroup gives rise to an exceptional (resp. weakly exceptional but not exceptional) quotient singularity, then that simple group is the Hall-Janko group (resp. the Suzuki group)

Semiquantitative Decision Tools for FMD Emergency Vaccination Informed by Field Observations and Simulated Outbreak Data

DEFF Research Database (Denmark)

Willeberg, Preben; AlKhamis, Mohammad; Boklund, Anette

2017-01-01

We present two simple, semiquantitative model-based decision tools, based on the principle of first 14 days incidence (FFI). The aim is to estimate the likelihood and the consequences, respectively, of the ultimate size of an ongoing FMD epidemic. The tools allow risk assessors to communicate...... and optimize the presentation of the resulting data for urgent decisions to be made by the risk managers, we estimated the sensitivity, specificity, as well as the negative and positive predictive values, using a chosen day-14 outbreak number as predictor of the magnitude of the number of remaining post-day-14...

Nanocapillary Atmospheric Pressure Plasma Jet: A Tool for Ultrafine Maskless Surface Modification at Atmospheric Pressure.

Science.gov (United States)

Motrescu, Iuliana; Nagatsu, Masaaki

2016-05-18

With respect to microsized surface functionalization techniques we proposed the use of a maskless, versatile, simple tool, represented by a nano- or microcapillary atmospheric pressure plasma jet for producing microsized controlled etching, chemical vapor deposition, and chemical modification patterns on polymeric surfaces. In this work we show the possibility of size-controlled surface amination, and we discuss it as a function of different processing parameters. Moreover, we prove the successful connection of labeled sugar chains on the functionalized microscale patterns, indicating the possibility to use ultrafine capillary atmospheric pressure plasma jets as versatile tools for biosensing, tissue engineering, and related biomedical applications.

Evaluation of the validity of osteoporosis and fracture risk assessment tools (IOF One Minute Test, SCORE, and FRAX) in postmenopausal Palestinian women.

Science.gov (United States)

Kharroubi, Akram; Saba, Elias; Ghannam, Ibrahim; Darwish, Hisham

2017-12-01

The need for simple self-assessment tools is necessary to predict women at high risk for developing osteoporosis. In this study, tools like the IOF One Minute Test, Fracture Risk Assessment Tool (FRAX), and Simple Calculated Osteoporosis Risk Estimation (SCORE) were found to be valid for Palestinian women. The threshold for predicting women at risk for each tool was estimated. The purpose of this study is to evaluate the validity of the updated IOF (International Osteoporosis Foundation) One Minute Osteoporosis Risk Assessment Test, FRAX, SCORE as well as age alone to detect the risk of developing osteoporosis in postmenopausal Palestinian women. Three hundred eighty-two women 45 years and older were recruited including 131 women with osteoporosis and 251 controls following bone mineral density (BMD) measurement, 287 completed questionnaires of the different risk assessment tools. Receiver operating characteristic (ROC) curves were evaluated for each tool using bone BMD as the gold standard for osteoporosis. The area under the ROC curve (AUC) was the highest for FRAX calculated with BMD for predicting hip fractures (0.897) followed by FRAX for major fractures (0.826) with cut-off values ˃1.5 and ˃7.8%, respectively. The IOF One Minute Test AUC (0.629) was the lowest compared to other tested tools but with sufficient accuracy for predicting the risk of developing osteoporosis with a cut-off value ˃4 total yes questions out of 18. SCORE test and age alone were also as good predictors of risk for developing osteoporosis. According to the ROC curve for age, women ≥64 years had a higher risk of developing osteoporosis. Higher percentage of women with low BMD (T-score ≤-1.5) or osteoporosis (T-score ≤-2.5) was found among women who were not exposed to the sun, who had menopause before the age of 45 years, or had lower body mass index (BMI) compared to controls. Women who often fall had lower BMI and approximately 27% of the recruited postmenopausal

A simple formulation and solution to the replacement problem: a practical tool to assess the economic cow value, the value of a new pregnancy, and the cost of a pregnancy loss.

Science.gov (United States)

Cabrera, V E

2012-08-01

This study contributes to the research literature by providing a new formulation for the cow replacement problem, and it also contributes to the Extension deliverables by providing a user-friendly decision support system tool that would more likely be adopted and applied for practical decision making. The cow value, its related values of a new pregnancy and a pregnancy loss, and their associated replacement policies determine profitability in dairy farming. One objective of this study was to present a simple, interactive, dynamic, and robust formulation of the cow value and the replacement problem, including expectancy of the future production of the cow and the genetic gain of the replacement. The proven hypothesis of this study was that all the above requirements could be achieved by using a Markov chain algorithm. The Markov chain model allowed (1) calculation of a forward expected value of a studied cow and its replacement; (2) use of a single model (the Markov chain) to calculate both the replacement policies and the herd statistics; (3) use of a predefined, preestablished farm reproductive replacement policy; (4) inclusion of a farmer's assessment of the expected future performance of a cow; (5) inclusion of a farmer's assessment of genetic gain with a replacement; and (6) use of a simple spreadsheet or an online system to implement the decision support system. Results clearly demonstrated that the decision policies found with the Markov chain model were consistent with more complex dynamic programming models. The final user-friendly decision support tool is available at http://dairymgt.info/ → Tools → The Economic Value of a Dairy Cow. This tool calculates the cow value instantaneously and is highly interactive, dynamic, and robust. When a Wisconsin dairy farm was studied using the model, the solution policy called for replacing nonpregnant cows 11 mo after calving or months in milk (MIM) if in the first lactation and 9 MIM if in later lactations. The

GIS based application tool -- history of East India Company

Science.gov (United States)

Phophaliya, Sudhir

The emphasis of the thesis is to build an intuitive and robust GIS (Geographic Information systems) Tool which gives an in depth information on history of East India Company. The GIS tool also incorporates various achievements of East India Company which helped to establish their business all over world especially India. The user has the option to select these movements and acts by clicking on any of the marked states on the World map. The World Map also incorporates key features for East India Company like landing of East India Company in India, Darjeeling Tea Establishment, East India Company Stock Redemption Act etc. The user can know more about these features simply by clicking on each of them. The primary focus of the tool is to give the user a unique insight about East India Company; for this the tool has several HTML (Hypertext markup language) pages which the user can select. These HTML pages give information on various topics like the first Voyage, Trade with China, 1857 Revolt etc. The tool has been developed in JAVA. For the Indian map MOJO (Map Objects Java Objects) is used. MOJO is developed by ESRI. The major features shown on the World map was designed using MOJO. MOJO made it easy to incorporate the statistical data with these features. The user interface was intentionally kept simple and easy to use. To keep the user engaged, key aspects are explained using HTML pages. The idea is that pictures will help the user garner interest in the history of East India Company.

A Tool and Application Programming Interface for Browsing Historical Geostationary Satellite Data

Science.gov (United States)

Chee, T.; Nguyen, L.; Minnis, P.; Spangenberg, D.; Ayers, J.

2013-12-01

Providing access to information is a key concern for NASA Langley Research Center. We describe a tool and method that allows end users to easily browse and access information that is otherwise difficult to acquire and manipulate. The tool described has as its core the application-programming interface that is made available to the public. One goal of the tool is to provide a demonstration to end users so that they can use the enhanced imagery as an input into their own work flows. This project builds upon NASA Langley Cloud and Radiation Group's experience with making real-time and historical satellite imagery accessible and easily searchable. As we see the increasing use of virtual supply chains that provide additional value at each link there is value in making satellite imagery available through a simple access method as well as allowing users to browse and view that imagery as they need rather than in a manner most convenient for the data provider.

Review of ATLAS Open Data 8 TeV datasets, tools and activities

CERN Document Server

The ATLAS collaboration

2018-01-01

The ATLAS Collaboration has released two 8 TeV datasets and relevant simulated samples to the public for educational use. A number of groups within ATLAS have used these ATLAS Open Data 8 TeV datasets, developing tools and educational material to promote particle physics. The general aim of these activities is to provide simple and user-friendly interactive interfaces to simulate the procedures used by high-energy physics researchers. International Masterclasses introduce particle physics to high school students and have been studying 8 TeV ATLAS Open Data since 2015. Inspired by this success, a new ATLAS Open Data initiative was launched in 2016 for university students. A comprehensive educational platform was thus developed featuring a second 8 TeV dataset and a new set of educational tools. The 8 TeV datasets and associated tools are presented and discussed here, as well as a selection of activities studying the ATLAS Open Data 8 TeV datasets.

A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications

International Nuclear Information System (INIS)

Saleema, N.; Sarkar, D.K.; Paynter, R.W.; Gallant, D.; Eskandarian, M.

2012-01-01

Highlights: ► A very simple surface treatment method to achieve excellent and durable aluminum adhesive bonding. ► Our method involves simple immersion of aluminum in very dilute NaOH solution at room temperature with no involvement of strong acids or multiple procedures. ► Surface analysis via various surface characterization techniques showed morphological and chemical modifications favorable for obtaining highly durable bond strengths on the treated surface. ► Safe, economical, reproducible and simple method, easily applicable in industries. - Abstract: Structural adhesive bonding of aluminum is widely used in aircraft and automotive industries. It has been widely noted that surface preparation of aluminum surfaces prior to adhesive bonding plays a significant role in improving the strength of the adhesive bond. Surface cleanliness, surface roughness, surface wettability and surface chemistry are controlled primarily by proper surface treatment methods. In this study, we have employed a very simple technique influencing all these criteria by simply immersing aluminum substrates in a very dilute solution of sodium hydroxide (NaOH) and we have studied the effect of varying the treatment period on the adhesive bonding characteristics. A bi-component epoxy adhesive was used to join the treated surfaces and the bond strengths were evaluated via single lap shear (SLS) tests in pristine as well as degraded conditions. Surface morphology, chemistry, crystalline nature and wettability of the NaOH treated surfaces were characterized using various surface analytical tools such as scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDX), optical profilometry, infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and contact angle goniometry. Excellent adhesion characteristics with complete cohesive failure of the adhesive were encountered on the NaOH treated surfaces that are comparable to the benchmark

Supervised learning of tools for content-based search of image databases

Science.gov (United States)

Delanoy, Richard L.

1996-03-01

A computer environment, called the Toolkit for Image Mining (TIM), is being developed with the goal of enabling users with diverse interests and varied computer skills to create search tools for content-based image retrieval and other pattern matching tasks. Search tools are generated using a simple paradigm of supervised learning that is based on the user pointing at mistakes of classification made by the current search tool. As mistakes are identified, a learning algorithm uses the identified mistakes to build up a model of the user's intentions, construct a new search tool, apply the search tool to a test image, display the match results as feedback to the user, and accept new inputs from the user. Search tools are constructed in the form of functional templates, which are generalized matched filters capable of knowledge- based image processing. The ability of this system to learn the user's intentions from experience contrasts with other existing approaches to content-based image retrieval that base searches on the characteristics of a single input example or on a predefined and semantically- constrained textual query. Currently, TIM is capable of learning spectral and textural patterns, but should be adaptable to the learning of shapes, as well. Possible applications of TIM include not only content-based image retrieval, but also quantitative image analysis, the generation of metadata for annotating images, data prioritization or data reduction in bandwidth-limited situations, and the construction of components for larger, more complex computer vision algorithms.

A simple approach to nonlinear oscillators

International Nuclear Information System (INIS)

Ren Zhongfu; He Jihuan

2009-01-01

A very simple and effective approach to nonlinear oscillators is suggested. Anyone with basic knowledge of advanced calculus can apply the method to finding approximately the amplitude-frequency relationship of a nonlinear oscillator. Some examples are given to illustrate its extremely simple solution procedure and an acceptable accuracy of the obtained solutions.

Indoor Air Quality Tools for Schools Program: Benefits of Improving Air Quality in the School Environment.

Science.gov (United States)

Environmental Protection Agency, Washington, DC. Office of Radiation and Indoor Air.

The U.S. Environmental Protection Agency (EPA) developed the Indoor Air Quality Tools for Schools (IAQ TfS) Program to help schools prevent, identify, and resolve their IAQ problems. This publication describes the program and its advantages, explaining that through simple, low-cost measures, schools can: reduce IAQ-related health risks and…

A simple tool for preliminary hazard identification and quick assessment in craftwork and small/medium enterprises (SME).

Science.gov (United States)

Colombini, Daniela; Occhipinti, E; Di Leone, G

2012-01-01

During the last Congress of the International Ergonomics Association (IEA), Beijing, August 2009, an international group was founded aimed at developing a "toolkit for MSD prevention" within IEA and in collaboration with World Health Organization (WHO). Possible users of toolkits are: members of health and safety committees, health and safety representatives, line supervisors; labor inspectors; health workers implementing basic occupational health services; occupational health and safety specialists.According to ISO standard 11228 series and the new Draft CD ISO 12259-2009: Application document guides for the potential user, a computer software ( in Excel®) was create dealing with hazard "mapping" in handicraft The proposed methodology, using specific key enters and quick assessment criteria, allows a simple ergonomics hazard identification and risk estimation. Thus it makes possible to decide for which professional hazards a more exhaustive risk assessment will be necessary and which professional consultant should be involved (occupational physician, safety engineer, industrial hygienist, etc.).

Simple utility functions with Giffen demand

DEFF Research Database (Denmark)

Sørensen, Peter Norman

2007-01-01

Simple utility functions with the Giffen property are presented: locally, the demand curve for a good is upward sloping. The utility functions represent continuous, monotone, convex preferences......Simple utility functions with the Giffen property are presented: locally, the demand curve for a good is upward sloping. The utility functions represent continuous, monotone, convex preferences...

Analytical Aerodynamic Simulation Tools for Vertical Axis Wind Turbines

International Nuclear Information System (INIS)

Deglaire, Paul

2010-01-01

Wind power is a renewable energy source that is today the fastest growing solution to reduce CO 2 emissions in the electric energy mix. Upwind horizontal axis wind turbine with three blades has been the preferred technical choice for more than two decades. This horizontal axis concept is today widely leading the market. The current PhD thesis will cover an alternative type of wind turbine with straight blades and rotating along the vertical axis. A brief overview of the main differences between the horizontal and vertical axis concept has been made. However the main focus of this thesis is the aerodynamics of the wind turbine blades. Making aerodynamically efficient turbines starts with efficient blades. Making efficient blades requires a good understanding of the physical phenomena and effective simulations tools to model them. The specific aerodynamics for straight bladed vertical axis turbine flow are reviewed together with the standard aerodynamic simulations tools that have been used in the past by blade and rotor designer. A reasonably fast (regarding computer power) and accurate (regarding comparison with experimental results) simulation method was still lacking in the field prior to the current work. This thesis aims at designing such a method. Analytical methods can be used to model complex flow if the geometry is simple. Therefore, a conformal mapping method is derived to transform any set of section into a set of standard circles. Then analytical procedures are generalized to simulate moving multibody sections in the complex vertical flows and forces experienced by the blades. Finally the fast semi analytical aerodynamic algorithm boosted by fast multipole methods to handle high number of vortices is coupled with a simple structural model of the rotor to investigate potential aeroelastic instabilities. Together with these advanced simulation tools, a standard double multiple streamtube model has been developed and used to design several straight bladed

Modeling Composite Assessment Data Using Item Response Theory

Science.gov (United States)

Ueckert, Sebastian

2018-01-01

Composite assessments aim to combine different aspects of a disease in a single score and are utilized in a variety of therapeutic areas. The data arising from these evaluations are inherently discrete with distinct statistical properties. This tutorial presents the framework of the item response theory (IRT) for the analysis of this data type in a pharmacometric context. The article considers both conceptual (terms and assumptions) and practical questions (modeling software, data requirements, and model building). PMID:29493119

wft4galaxy: a workflow testing tool for galaxy.

Science.gov (United States)

Piras, Marco Enrico; Pireddu, Luca; Zanetti, Gianluigi

2017-12-01

Workflow managers for scientific analysis provide a high-level programming platform facilitating standardization, automation, collaboration and access to sophisticated computing resources. The Galaxy workflow manager provides a prime example of this type of platform. As compositions of simpler tools, workflows effectively comprise specialized computer programs implementing often very complex analysis procedures. To date, no simple way to automatically test Galaxy workflows and ensure their correctness has appeared in the literature. With wft4galaxy we offer a tool to bring automated testing to Galaxy workflows, making it feasible to bring continuous integration to their development and ensuring that defects are detected promptly. wft4galaxy can be easily installed as a regular Python program or launched directly as a Docker container-the latter reducing installation effort to a minimum. Available at https://github.com/phnmnl/wft4galaxy under the Academic Free License v3.0. marcoenrico.piras@crs4.it. © The Author 2017. Published by Oxford University Press.

Greenhouse gas emission trading schemes: a new tool for the environmental regulator's kit

International Nuclear Information System (INIS)

Soleille, Sebastien

2006-01-01

As the European Union greenhouse gas emission trading scheme (ETS) is emerging, it seems interesting to look back on previous experiments and to bring together a few elements of reflection about the pertinence of ETS as a new policy tool to regulate industrial pollution. So far, several regulatory tools have been used to decrease pollution. This article focuses on two of them, command-and-control (CAC) and ETS. There is no simple answer to which one is more efficient. It depends strongly on the context. Given a few elements outlined in this paper, the choice of an ETS to abate industrial emissions of greenhouse gases in the European Union (EU) can be considered pertinent. But, ultimately, what makes a scheme environmentally efficient is not the tool in itself (ETS or CAC) but the ambition of the target. Hence the design of the National Allocation Plans setting the emission caps are of paramount importance. They will make the EU ETS either a useless mess or an effective climate change mitigation policy tool

Sutura simples e âncora em quadris de coelhos Simple suture and anchor in rabbit hips

Directory of Open Access Journals (Sweden)

Fernando Cal Garcia Filho

2012-01-01

Full Text Available OBJETIVO: Por meio de ensaios biomecânicos, comparar as capsulorrafias com sutura simples e com âncoras, em quadris de coelhos. MÉTODO: Foram utilizados 13 coelhos, 26 quadris, todos machos da raça Nova Zelândia albinos (Oryctolaguscuniculus. Inicialmente, realizamos um projeto piloto em três coelhos (seis quadris. Este experimento constou de 10 coelhos, divididos em 2 grupos: o Grupo 1 submetido à capsulorrafia (quadris direito e esquerdo com sutura simples utilizando fio absorvível de ácido poliglicólico e o Grupo 2 submetido a capsulorrafia (quadris direito e esquerdo com âncora de titânio. Após o período de quatro semanas de operados, todos animais foram submetidos à eutanásia e seus quadris congelados. Após um descongelamento prévio das peças, no mesmo dia das análises biomecânicas, foram avaliados os parâmetros de rigidez, força máxima, deformidade máxima e energia. RESULTADOS: Não houve diferença estatisticamente significante em relação à força no limite de proporcionalidade, rigidez e força máxima entre os grupos com sutura simples e com âncora. CONCLUSÃO: Por meio dos ensaios biomecânicos, tendo como parâmetro a rigidez, a força máxima, a deformidade máxima e a energia, ficou demonstrado que as capsulorrafias em quadris de coelhos com sutura simples e com âncora são semelhantes entre si. Nível de Evidência II, Estudo Prospectivo Comparativo.OBJECTIVE: Using biomechanical studies, this research aims to compare hip capsulorrhaphy in rabbits, carried out with two different techniques: capsulorrhaphy with simple sutures and with anchors. METHOD: Thirteen New Zealand Albino (Oryctolaguscuniculus male rabbits, twenty-six hip joints, were used. First, a pilot project was performed with three rabbits (six hip joints. This experiment consisted of ten rabbits divided into two groups: group 1 underwent capsulorrhaphy on both right and left hips with simple suture using polyglycolic acid absorbable thread

Towards tool support for spreadsheet-based domain-specific languages

DEFF Research Database (Denmark)

Adam, Marian Sorin; Schultz, Ulrik Pagh

2015-01-01

Spreadsheets are commonly used by non-programmers to store data in a structured form, this data can in some cases be considered to be a program in a domain-specific language (DSL). Unlike ordinary text-based domain-specific languages, there is however currently no formalism for expressing...... the syntax of such spreadsheet-based DSLs (SDSLs), and there is no tool support for automatically generating language infrastructure such as parsers and IDE support. In this paper we define a simple notion of two-dimensional grammars for SDSLs, and show how such grammars can be used for automatically...

Keeping it simple: flowering plants tend to retain, and revert to, simple leaves.

Science.gov (United States)

Geeta, R; Dávalos, Liliana M; Levy, André; Bohs, Lynn; Lavin, Mathew; Mummenhoff, Klaus; Sinha, Neelima; Wojciechowski, Martin F

2012-01-01

• A wide range of factors (developmental, physiological, ecological) with unpredictable interactions control variation in leaf form. Here, we examined the distribution of leaf morphologies (simple and complex forms) across angiosperms in a phylogenetic context to detect patterns in the directions of changes in leaf shape. • Seven datasets (diverse angiosperms and six nested clades, Sapindales, Apiales, Papaveraceae, Fabaceae, Lepidium, Solanum) were analysed using maximum likelihood and parsimony methods to estimate asymmetries in rates of change among character states. • Simple leaves are most frequent among angiosperm lineages today, were inferred to be ancestral in angiosperms and tended to be retained in evolution (stasis). Complex leaves slowly originated ('gains') and quickly reverted to simple leaves ('losses') multiple times, with a significantly greater rate of losses than gains. Lobed leaves may be a labile intermediate step between different forms. The nested clades showed mixed trends; Solanum, like the angiosperms in general, had higher rates of losses than gains, but the other clades had higher rates of gains than losses. • The angiosperm-wide pattern could be taken as a null model to test leaf evolution patterns in particular clades, in which patterns of variation suggest clade-specific processes that have yet to be investigated fully. © 2011 The Authors. New Phytologist © 2011 New Phytologist Trust.

Evaluation of Oral and Maxillofacial Surgery Residents' Operative Skills: Feasibility and Engagement Study Using SIMPL Software for a Mobile Phone.

Science.gov (United States)

Kaban, Leonard B; Cappetta, Alyssa; George, Brian C; Lahey, Edward T; Bohnen, Jordan D; Troulis, Maria J

2017-10-01

There are no universally accepted tools to evaluate operative skills of surgical residents in a timely fashion. The purpose of this study was to determine the feasibility of using a smartphone application, SIMPL (System for Improving and Measuring Procedural Learning), developed by a multi-institutional research collaborative, to achieve a high rate of timely operative evaluations and resident communication and to collect performance data. The authors hypothesized that these goals would be achieved because the process is convenient and efficient. This was a prospective feasibility and engagement study using SIMPL to evaluate residents' operative skills. SIMPL requires the attending surgeon to answer 3 multiple-choice questions: 1) What level of help (Zwisch Scale) was required by the trainee? 2) What was the level of performance? 3) How complex was the case? The evaluator also can dictate a narrative. The sample was composed of 3 faculty members and 3 volunteer senior residents. Predictor variables were the surgeons, trainees, and procedures performed. Outcome variables included number and percentage of procedures performed by faculty-and-resident pairs assessed, time required to complete assessments, time lapsed to submission, percentage of assessments with narratives, and residents' response rates. From March through June 2016, 151 procedures were performed in the operating room by the faculty-and-resident teams. There were 107 assessments submitted (71%). Resident response (self-assessment) to faculty evaluations was 81%. Recorded time to complete assessments (n = 75 of 107) was shorter than 2 minutes. The time lapsed to submission was shorter than 72 hours (100%). Dictations were submitted for 35 evaluations (33%). Data for the type of help, performance, and complexity of cases were collected for each resident. SIMPL facilitates timely intraoperative evaluations of surgical skills, engagement by faculty and residents, and collection of detailed procedural

Complexity-aware simple modeling.

Science.gov (United States)

Gómez-Schiavon, Mariana; El-Samad, Hana

2018-02-26

Mathematical models continue to be essential for deepening our understanding of biology. On one extreme, simple or small-scale models help delineate general biological principles. However, the parsimony of detail in these models as well as their assumption of modularity and insulation make them inaccurate for describing quantitative features. On the other extreme, large-scale and detailed models can quantitatively recapitulate a phenotype of interest, but have to rely on many unknown parameters, making them often difficult to parse mechanistically and to use for extracting general principles. We discuss some examples of a new approach-complexity-aware simple modeling-that can bridge the gap between the small-scale and large-scale approaches. Copyright © 2018 Elsevier Ltd. All rights reserved.

Solution of the schrodinger equation in one dimension by simple method for a simple step potential

International Nuclear Information System (INIS)

Ertik, H.

2005-01-01

The coefficients of the transmission and reflection for the simple-step barrier potential were calculated by a simple method. Their values were entirely different from those often encountered in the literature. Especially in the case that the total energy is equal to the barrier potential, the value of 0,20 for the reflection coefficient was obtained whereas this is zero in the literature. This may be considered as an interesting point

SU-D-BRB-01: A Predictive Planning Tool for Stereotactic Radiosurgery

Energy Technology Data Exchange (ETDEWEB)

Palefsky, S; Roper, J; Elder, E; Dhabaan, A [Winship Cancer Institute of Emory University, Atlanta, GA (United States)

2015-06-15

Purpose: To demonstrate the feasibility of a predictive planning tool which provides SRS planning guidance based on simple patient anatomical properties: PTV size, PTV shape and distance from critical structures. Methods: Ten framed SRS cases treated at Winship Cancer Institute of Emory University were analyzed to extract data on PTV size, sphericity (shape), and distance from critical structures such as the brainstem and optic chiasm. The cases consisted of five pairs. Each pair consisted of two cases with a similar diagnosis (such as pituitary adenoma or arteriovenous malformation) that were treated with different techniques: DCA, or IMRS. A Naive Bayes Classifier was trained on this data to establish the conditions under which each treatment modality was used. This model was validated by classifying ten other randomly-selected cases into DCA or IMRS classes, calculating the probability of each technique, and comparing results to the treated technique. Results: Of the ten cases used to validate the model, nine had their technique predicted correctly. The three cases treated with IMRS were all identified as such. Their probabilities of being treated with IMRS ranged between 59% and 100%. Six of the seven cases treated with DCA were correctly classified. These probabilities ranged between 51% and 95%. One case treated with DCA was incorrectly predicted to be an IMRS plan. The model’s confidence in this case was 91%. Conclusion: These findings indicate that a predictive planning tool based on simple patient anatomical properties can predict the SRS technique used for treatment. The algorithm operated with 90% accuracy. With further validation on larger patient populations, this tool may be used clinically to guide planners in choosing an appropriate treatment technique. The prediction algorithm could also be adapted to guide selection of treatment parameters such as treatment modality and number of fields for radiotherapy across anatomical sites.

SU-D-BRB-01: A Predictive Planning Tool for Stereotactic Radiosurgery

International Nuclear Information System (INIS)

Palefsky, S; Roper, J; Elder, E; Dhabaan, A

2015-01-01

Purpose: To demonstrate the feasibility of a predictive planning tool which provides SRS planning guidance based on simple patient anatomical properties: PTV size, PTV shape and distance from critical structures. Methods: Ten framed SRS cases treated at Winship Cancer Institute of Emory University were analyzed to extract data on PTV size, sphericity (shape), and distance from critical structures such as the brainstem and optic chiasm. The cases consisted of five pairs. Each pair consisted of two cases with a similar diagnosis (such as pituitary adenoma or arteriovenous malformation) that were treated with different techniques: DCA, or IMRS. A Naive Bayes Classifier was trained on this data to establish the conditions under which each treatment modality was used. This model was validated by classifying ten other randomly-selected cases into DCA or IMRS classes, calculating the probability of each technique, and comparing results to the treated technique. Results: Of the ten cases used to validate the model, nine had their technique predicted correctly. The three cases treated with IMRS were all identified as such. Their probabilities of being treated with IMRS ranged between 59% and 100%. Six of the seven cases treated with DCA were correctly classified. These probabilities ranged between 51% and 95%. One case treated with DCA was incorrectly predicted to be an IMRS plan. The model’s confidence in this case was 91%. Conclusion: These findings indicate that a predictive planning tool based on simple patient anatomical properties can predict the SRS technique used for treatment. The algorithm operated with 90% accuracy. With further validation on larger patient populations, this tool may be used clinically to guide planners in choosing an appropriate treatment technique. The prediction algorithm could also be adapted to guide selection of treatment parameters such as treatment modality and number of fields for radiotherapy across anatomical sites

CrossQuery: a web tool for easy associative querying of transcriptome data.

Directory of Open Access Journals (Sweden)

Toni U Wagner

Full Text Available Enormous amounts of data are being generated by modern methods such as transcriptome or exome sequencing and microarray profiling. Primary analyses such as quality control, normalization, statistics and mapping are highly complex and need to be performed by specialists. Thereafter, results are handed back to biomedical researchers, who are then confronted with complicated data lists. For rather simple tasks like data filtering, sorting and cross-association there is a need for new tools which can be used by non-specialists. Here, we describe CrossQuery, a web tool that enables straight forward, simple syntax queries to be executed on transcriptome sequencing and microarray datasets. We provide deep-sequencing data sets of stem cell lines derived from the model fish Medaka and microarray data of human endothelial cells. In the example datasets provided, mRNA expression levels, gene, transcript and sample identification numbers, GO-terms and gene descriptions can be freely correlated, filtered and sorted. Queries can be saved for later reuse and results can be exported to standard formats that allow copy-and-paste to all widespread data visualization tools such as Microsoft Excel. CrossQuery enables researchers to quickly and freely work with transcriptome and microarray data sets requiring only minimal computer skills. Furthermore, CrossQuery allows growing association of multiple datasets as long as at least one common point of correlated information, such as transcript identification numbers or GO-terms, is shared between samples. For advanced users, the object-oriented plug-in and event-driven code design of both server-side and client-side scripts allow easy addition of new features, data sources and data types.

CrossQuery: a web tool for easy associative querying of transcriptome data.

Science.gov (United States)

Wagner, Toni U; Fischer, Andreas; Thoma, Eva C; Schartl, Manfred

2011-01-01

Enormous amounts of data are being generated by modern methods such as transcriptome or exome sequencing and microarray profiling. Primary analyses such as quality control, normalization, statistics and mapping are highly complex and need to be performed by specialists. Thereafter, results are handed back to biomedical researchers, who are then confronted with complicated data lists. For rather simple tasks like data filtering, sorting and cross-association there is a need for new tools which can be used by non-specialists. Here, we describe CrossQuery, a web tool that enables straight forward, simple syntax queries to be executed on transcriptome sequencing and microarray datasets. We provide deep-sequencing data sets of stem cell lines derived from the model fish Medaka and microarray data of human endothelial cells. In the example datasets provided, mRNA expression levels, gene, transcript and sample identification numbers, GO-terms and gene descriptions can be freely correlated, filtered and sorted. Queries can be saved for later reuse and results can be exported to standard formats that allow copy-and-paste to all widespread data visualization tools such as Microsoft Excel. CrossQuery enables researchers to quickly and freely work with transcriptome and microarray data sets requiring only minimal computer skills. Furthermore, CrossQuery allows growing association of multiple datasets as long as at least one common point of correlated information, such as transcript identification numbers or GO-terms, is shared between samples. For advanced users, the object-oriented plug-in and event-driven code design of both server-side and client-side scripts allow easy addition of new features, data sources and data types.

A GIS Tool for evaluating and improving NEXRAD and its application in distributed hydrologic modeling

Science.gov (United States)

Zhang, X.; Srinivasan, R.

2008-12-01

In this study, a user friendly GIS tool was developed for evaluating and improving NEXRAD using raingauge data. This GIS tool can automatically read in raingauge and NEXRAD data, evaluate the accuracy of NEXRAD for each time unit, implement several geostatistical methods to improve the accuracy of NEXRAD through raingauge data, and output spatial precipitation map for distributed hydrologic model. The geostatistical methods incorporated in this tool include Simple Kriging with varying local means, Kriging with External Drift, Regression Kriging, Co-Kriging, and a new geostatistical method that was newly developed by Li et al. (2008). This tool was applied in two test watersheds at hourly and daily temporal scale. The preliminary cross-validation results show that incorporating raingauge data to calibrate NEXRAD can pronouncedly change the spatial pattern of NEXRAD and improve its accuracy. Using different geostatistical methods, the GIS tool was applied to produce long term precipitation input for a distributed hydrologic model - Soil and Water Assessment Tool (SWAT). Animated video was generated to vividly illustrate the effect of using different precipitation input data on distributed hydrologic modeling. Currently, this GIS tool is developed as an extension of SWAT, which is used as water quantity and quality modeling tool by USDA and EPA. The flexible module based design of this tool also makes it easy to be adapted for other hydrologic models for hydrological modeling and water resources management.

Tool life equation for blanking 18-8 stainless steel strips

International Nuclear Information System (INIS)

Faura, F.; Lopez, J.; Sanes, J.; Garcia, A.

1998-01-01

Hereinafter it is presented a model for the behaviour and life of circular blanking tool used in sheet forming processes of 18-8 stainless steel (sheet thickness: 1 mm). Frostily it has analyzed the different studies that have previously dealt with this problem. Secondly taking into account recently made experiments, it is proposed a simple formulation to predict tool life with enough reliability. to this purpose it has examined different parameters in the wear process, inferring from these the fundamental parameters that regulate them and about which the different equations have been configurated. Blanking tests were performed using a 20 t press at a speed of 150 strokes/min. Punch materials used in these test were AISI A2 and AISI D2 with diameters between 1.5 and 10 mm. The blanking tests were performed at a clearance between 5 and 20% of the work material thickness. (Author) 8 refs

Fast scattering simulation tool for multi-energy x-ray imaging

Energy Technology Data Exchange (ETDEWEB)

Sossin, A., E-mail: artur.sossin@cea.fr [CEA-LETI MINATEC Grenoble, F-38054 Grenoble (France); Tabary, J.; Rebuffel, V. [CEA-LETI MINATEC Grenoble, F-38054 Grenoble (France); Létang, J.M.; Freud, N. [Université de Lyon, CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon, Université Claude Bernard Lyon 1, Centre Léon Bérard (France); Verger, L. [CEA-LETI MINATEC Grenoble, F-38054 Grenoble (France)

2015-12-01

A combination of Monte Carlo (MC) and deterministic approaches was employed as a means of creating a simulation tool capable of providing energy resolved x-ray primary and scatter images within a reasonable time interval. Libraries of Sindbad, a previously developed x-ray simulation software, were used in the development. The scatter simulation capabilities of the tool were validated through simulation with the aid of GATE and through experimentation by using a spectrometric CdTe detector. A simple cylindrical phantom with cavities and an aluminum insert was used. Cross-validation with GATE showed good agreement with a global spatial error of 1.5% and a maximum scatter spectrum error of around 6%. Experimental validation also supported the accuracy of the simulations obtained from the developed software with a global spatial error of 1.8% and a maximum error of around 8.5% in the scatter spectra.

A simple spatial working memory and attention test on paired symbols shows developmental deficits in schizophrenia patients.

Science.gov (United States)

Song, Wei; Zhang, Kai; Sun, Jinhua; Ma, Lina; Jesse, Forrest Fabian; Teng, Xiaochun; Zhou, Ying; Bao, Hechen; Chen, Shiqing; Wang, Shuai; Yang, Beimeng; Chu, Xixia; Ding, Wenhua; Du, Yasong; Cheng, Zaohuo; Wu, Bin; Chen, Shanguang; He, Guang; He, Lin; Chen, Xiaoping; Li, Weidong

2013-01-01

People with neuropsychiatric disorders such as schizophrenia often display deficits in spatial working memory and attention. Evaluating working memory and attention in schizophrenia patients is usually based on traditional tasks and the interviewer's judgment. We developed a simple Spatial Working Memory and Attention Test on Paired Symbols (SWAPS). It takes only several minutes to complete, comprising 101 trials for each subject. In this study, we tested 72 schizophrenia patients and 188 healthy volunteers in China. In a healthy control group with ages ranging from 12 to 60, the efficiency score (accuracy divided by reaction time) reached a peak in the 20-27 age range and then declined with increasing age. Importantly, schizophrenia patients failed to display this developmental trend in the same age range and adults had significant deficits compared to the control group. Our data suggests that this simple Spatial Working Memory and Attention Test on Paired Symbols can be a useful tool for studies of spatial working memory and attention in neuropsychiatric disorders.

Identification of facilitators and barriers to residents' use of a clinical reasoning tool.

Science.gov (United States)

DiNardo, Deborah; Tilstra, Sarah; McNeil, Melissa; Follansbee, William; Zimmer, Shanta; Farris, Coreen; Barnato, Amber E

2018-03-28

While there is some experimental evidence to support the use of cognitive forcing strategies to reduce diagnostic error in residents, the potential usability of such strategies in the clinical setting has not been explored. We sought to test the effect of a clinical reasoning tool on diagnostic accuracy and to obtain feedback on its usability and acceptability. We conducted a randomized behavioral experiment testing the effect of this tool on diagnostic accuracy on written cases among post-graduate 3 (PGY-3) residents at a single internal medical residency program in 2014. Residents completed written clinical cases in a proctored setting with and without prompts to use the tool. The tool encouraged reflection on concordant and discordant aspects of each case. We used random effects regression to assess the effect of the tool on diagnostic accuracy of the independent case sets, controlling for case complexity. We then conducted audiotaped structured focus group debriefing sessions and reviewed the tapes for facilitators and barriers to use of the tool. Of 51 eligible PGY-3 residents, 34 (67%) participated in the study. The average diagnostic accuracy increased from 52% to 60% with the tool, a difference that just met the test for statistical significance in adjusted analyses (p=0.05). Residents reported that the tool was generally acceptable and understandable but did not recognize its utility for use with simple cases, suggesting the presence of overconfidence bias. A clinical reasoning tool improved residents' diagnostic accuracy on written cases. Overconfidence bias is a potential barrier to its use in the clinical setting.

Generalized Gradient Approximation Made Simple

International Nuclear Information System (INIS)

Perdew, J.P.; Burke, K.; Ernzerhof, M.

1996-01-01

Generalized gradient approximations (GGA close-quote s) for the exchange-correlation energy improve upon the local spin density (LSD) description of atoms, molecules, and solids. We present a simple derivation of a simple GGA, in which all parameters (other than those in LSD) are fundamental constants. Only general features of the detailed construction underlying the Perdew-Wang 1991 (PW91) GGA are invoked. Improvements over PW91 include an accurate description of the linear response of the uniform electron gas, correct behavior under uniform scaling, and a smoother potential. copyright 1996 The American Physical Society

A Simple Evaluation Tool (ET-CET) Indicates Increase of Diagnostic Skills From Small Bowel Capsule Endoscopy Training Courses

OpenAIRE

Albert, J.G.; Humbla, O.; McAlindon, M.E.; Davison, C.; Seitz, U.; Fraser, C.; Hagenm?ller, F.; Noetzel, E.; Spada, C.; Riccioni, M.E.; Barnert, J.; Filmann, N.; Keuchel, M.

2015-01-01

Abstract Small bowel capsule endoscopy (SBCE) has become a first line diagnostic tool. Several training courses with a similar format have been established in Europe; however, data on learning curve and training in SBCE remain sparse. Between 2008 and 2011, different basic SBCE training courses were organized internationally in UK (n?=?2), Italy (n?=?2), Germany (n?=?2), Finland (n?=?1), and nationally in Germany (n?=?10), applying similar 8-hour curricula with 50% lectures and 50% hands-on t...

Falling balls and simple shearing strain

International Nuclear Information System (INIS)

Brun, J L; Pacheco, A F

2006-01-01

The problem of particles falling under gravity allows us to relate Hamiltonian mechanics to such different subjects as elasticity and fluid mechanics. It is with this in mind that mechanics gives us the opportunity of introducing, in a rather simple and unusual form, some concepts such as vorticity, the incompressibility condition or simple shear strain to physics students at the undergraduate level

ATLAS OpenData and OpenKey: using low tech computational tools for students training in High Energy Physics

CERN Document Server

Sanchez Pineda, Arturos; The ATLAS collaboration

2018-01-01

One of the big challenges in High Energy Physics development is the fact that many potential -and very valuable- students and young researchers live in countries where internet access and computational infrastructure are poor compared to institutions already participating. In order to accelerate the process, the ATLAS Open Data project releases useful and meaningful data and tools using standard and easy-to-deploy computational means, such as custom and light Linux Virtual Machines, open source technologies, web and desktop applications. The ATLAS Open Key, a simple USB pen, allows transporting all those resources around the globe. As simple as it sounds, this approach is helping to train students that are now PhD candidates and to integrate HEP educational programs at Master level in universities where did not exist before. The software tools and resources used will be presented, as well as results and stories, ideas and next steps of the ATLAS Open Data project.

Cardiodynamicsgram: a novel tool for monitoring cardiac function in exercise training.

Science.gov (United States)

Wen, Xu; Guo, Bokai; Gong, Yinglan; Xia, Ling; Yu, Jie

2018-04-27

This study evaluated the feasibility of cardiodynamicsgram (CDG) for monitoring the cardiac functions of athletes and exercisers. CDG could provide an effective, simple, and economical tool for exercise training. Seventeen middle-distance race athletes aged 14-28 years old were recruited. CDG tests and blood test including creatine kinase (CK), CK-MB isoenzyme, and high-sensitivity troponin I (hsTnI) were performed before a high-intensity prolonged training, as well as 2 and 14 h after training, respectively. The CDG test result was unsatisfactory when the CK test result was used as standard. However, the accuracy of CDG test was about 80% when CK-MB and hsTnI were used as standards. Thus, CDG offers a noninvasive, simple, and economical approach for monitoring the cardiac function of athletes and exercisers during exercise training. Nonetheless, the applicability of CDG needs further investigation.

Vortex breakdown in simple pipe bends

Science.gov (United States)

Ault, Jesse; Shin, Sangwoo; Stone, Howard

2016-11-01

Pipe bends and elbows are one of the most common fluid mechanics elements that exists. However, despite their ubiquity and the extensive amount of research related to these common, simple geometries, unexpected complexities still remain. We show that for a range of geometries and flow conditions, these simple flows experience unexpected fluid dynamical bifurcations resembling the bubble-type vortex breakdown phenomenon. Specifically, we show with simulations and experiments that recirculation zones develop within the bends under certain conditions. As a consequence, fluid and particles can remain trapped within these structures for unexpectedly-long time scales. We also present simple techniques to mitigate this recirculation effect which can potentially have impact across industries ranging from biomedical and chemical processing to food and health sciences.

Teaching scientific concepts through simple models and social communication techniques

International Nuclear Information System (INIS)

Tilakaratne, K.

2011-01-01

For science education, it is important to demonstrate to students the relevance of scientific concepts in every-day life experiences. Although there are methods available for achieving this goal, it is more effective if cultural flavor is also added to the teaching techniques and thereby the teacher and students can easily relate the subject matter to their surroundings. Furthermore, this would bridge the gap between science and day-to-day experiences in an effective manner. It could also help students to use science as a tool to solve problems faced by them and consequently they would feel science is a part of their lives. In this paper, it has been described how simple models and cultural communication techniques can be used effectively in demonstrating important scientific concepts to the students of secondary and higher secondary levels by using two consecutive activities carried out at the Institute of Fundamental Studies (IFS), Sri Lanka. (author)

Comparison between the SIMPLE and ENERGY mixing models

International Nuclear Information System (INIS)

Burns, K.J.; Todreas, N.E.

1980-07-01

The SIMPLE and ENERGY mixing models were compared in order to investigate the limitations of SIMPLE's analytically formulated mixing parameter, relative to the experimentally calibrated ENERGY mixing parameters. For interior subchannels, it was shown that when the SIMPLE and ENERGY parameters are reduced to a common form, there is good agreement between the two models for a typical fuel geometry. However, large discrepancies exist for typical blanket (lower P/D) geometries. Furthermore, the discrepancies between the mixing parameters result in significant differences in terms of the temperature profiles generated by the ENERGY code utilizing these mixing parameters as input. For edge subchannels, the assumptions made in the development of the SIMPLE model were extended to the rectangular edge subchannel geometry used in ENERGY. The resulting effective eddy diffusivities (used by the ENERGY code) associated with the SIMPLE model are again closest to those of the ENERGY model for the fuel assembly geometry. Finally, the SIMPLE model's neglect of a net swirl effect in the edge region is most limiting for assemblies exhibiting relatively large radial power skews

Eddy currents self-tuning dynamic vibration absorber for machine tool chatter suppression

OpenAIRE

Aguirre , Gorka; Gorostiaga , Mikel; Porchez , Thomas; Munoa , Jokin

2013-01-01

International audience; The current trend in machine tool design aims at stiffer machines with lowerinfluence of friction, leading to faster and more precise machines. However, this is atthe expense of reducing the machine damping, which is mainly produced by friction,and thus increasing the risk of suffering from a self-excited vibration named chatter,which limits the productivity of the process. Dynamic vibration absorbers (DVAs)offer a relatively simple and low cost solution to reduce chat...

Comparison Between Physics and Conventional Forceps in Simple Dental Extraction.

Science.gov (United States)

El-Kenawy, Mohamed H; Ahmed, Wael Mohamed Said

2015-12-01

Atraumatic dental extraction preserves bone, gingival architecture, and allows for the option of future or immediate dental implant placement. A number of tools and techniques have been proposed for minimally invasive tooth removal such as physics forceps. The biomechanical design of physics forceps decreases the incidence of root fracture, and maintains the buccal bone plate, which is essential for the proper healing of an immediately placed dental implant. This study was conducted to evaluate the efficacy of physics forceps versus conventional forceps in simple dental extraction. 200 adult patients seeking simple dental extraction were selected from the Outpatient Clinic in the Oral and Maxillofacial Surgery Department, Faculty of Dentistry, Mansoura University, Egypt. The selected patients were randomly allocated into two groups: group I: included 100 patients, in this group extraction was done using physics forceps, and group II: included 100 patients, in this group extraction was done using conventional forceps. In physics forceps group: crown fracture occurred in three cases (3 %), buccal bone fracture occurred in three cases (3 %), and root fracture occurred in 14 roots (8.5 %), while in conventional forceps group: crown fracture occurred in 10 cases (10 %), buccal bone fracture occurred in seven cases (7 %), and root fracture occurred in 27 roots (16.6 %). Physics forceps are innovative extraction instruments. By using them, it is possible to perform difficult extractions, with predictable results, and without need to reflect a flap. Using physics forceps decreases the incidence of crown, root, and buccal bone plate fractures, in comparison to the conventional forceps.

Simple Driving Techniques

DEFF Research Database (Denmark)

Rosendahl, Mads

2002-01-01

-like language. Our aim is to extract a simple notion of driving and show that even in this tamed form it has much of the power of more general notions of driving. Our driving technique may be used to simplify functional programs which use function composition and will often be able to remove intermediate data...

HistFactory: A tool for creating statistical models for use with RooFit and RooStats

CERN Document Server

Cranmer, Kyle; Moneta, Lorenzo; Shibata, Akira; Verkerke, Wouter

2012-01-01

The HistFactory is a tool to build parametrized probability density functions (pdfs) in the RooFit/RooStats framework based based on simple ROOT histograms organized in an XML file. The pdf has a restricted form, but it is sufficiently flexible to describe many analyses based on template histograms. The tool takes a modular approach to build complex pdfs from more primative conceptual building blocks. The resulting PDF is stored in a RooWorkspace which can be saved to and read from a ROOT file. This document describes the defaults and interface in HistFactory 5.32.

The Hematopoietic Expression Viewer: expanding mobile apps as a scientific tool.

Science.gov (United States)

James, Regis A; Rao, Mitchell M; Chen, Edward S; Goodell, Margaret A; Shaw, Chad A

2012-07-15

Many important data in current biological science comprise hundreds, thousands or more individual results. These massive data require computational tools to navigate results and effectively interact with the content. Mobile device apps are an increasingly important tool in the everyday lives of scientists and non-scientists alike. These software present individuals with compact and efficient tools to interact with complex data at meetings or other locations remote from their main computing environment. We believe that apps will be important tools for biologists, geneticists and physicians to review content while participating in biomedical research or practicing medicine. We have developed a prototype app for displaying gene expression data using the iOS platform. To present the software engineering requirements, we review the model-view-controller schema for Apple's iOS. We apply this schema to a simple app for querying locally developed microarray gene expression data. The challenge of this application is to balance between storing content locally within the app versus obtaining it dynamically via a network connection. The Hematopoietic Expression Viewer is available at http://www.shawlab.org/he_viewer. The source code for this project and any future information on how to obtain the app can be accessed at http://www.shawlab.org/he_viewer.

Seismic Safety Of Simple Masonry Buildings

International Nuclear Information System (INIS)

Guadagnuolo, Mariateresa; Faella, Giuseppe

2008-01-01

Several masonry buildings comply with the rules for simple buildings provided by seismic codes. For these buildings explicit safety verifications are not compulsory if specific code rules are fulfilled. In fact it is assumed that their fulfilment ensures a suitable seismic behaviour of buildings and thus adequate safety under earthquakes. Italian and European seismic codes differ in the requirements for simple masonry buildings, mostly concerning the building typology, the building geometry and the acceleration at site. Obviously, a wide percentage of buildings assumed simple by codes should satisfy the numerical safety verification, so that no confusion and uncertainty have to be given rise to designers who must use the codes. This paper aims at evaluating the seismic response of some simple unreinforced masonry buildings that comply with the provisions of the new Italian seismic code. Two-story buildings, having different geometry, are analysed and results from nonlinear static analyses performed by varying the acceleration at site are presented and discussed. Indications on the congruence between code rules and results of numerical analyses performed according to the code itself are supplied and, in this context, the obtained result can provide a contribution for improving the seismic code requirements

A simple model for indentation creep

Science.gov (United States)

Ginder, Ryan S.; Nix, William D.; Pharr, George M.

2018-03-01

A simple model for indentation creep is developed that allows one to directly convert creep parameters measured in indentation tests to those observed in uniaxial tests through simple closed-form relationships. The model is based on the expansion of a spherical cavity in a power law creeping material modified to account for indentation loading in a manner similar to that developed by Johnson for elastic-plastic indentation (Johnson, 1970). Although only approximate in nature, the simple mathematical form of the new model makes it useful for general estimation purposes or in the development of other deformation models in which a simple closed-form expression for the indentation creep rate is desirable. Comparison to a more rigorous analysis which uses finite element simulation for numerical evaluation shows that the new model predicts uniaxial creep rates within a factor of 2.5, and usually much better than this, for materials creeping with stress exponents in the range 1 ≤ n ≤ 7. The predictive capabilities of the model are evaluated by comparing it to the more rigorous analysis and several sets of experimental data in which both the indentation and uniaxial creep behavior have been measured independently.

A simple non-linear model of immune response

International Nuclear Information System (INIS)

Gutnikov, Sergei; Melnikov, Yuri

2003-01-01

It is still unknown why the adaptive immune response in the natural immune system based on clonal proliferation of lymphocytes requires interaction of at least two different cell types with the same antigen. We present a simple mathematical model illustrating that the system with separate types of cells for antigen recognition and patogen destruction provides more robust adaptive immunity than the system where just one cell type is responsible for both recognition and destruction. The model is over-simplified as we did not have an intention of describing the natural immune system. However, our model provides a tool for testing the proposed approach through qualitative analysis of the immune system dynamics in order to construct more sophisticated models of the immune systems that exist in the living nature. It also opens a possibility to explore specific features of highly non-linear dynamics in nature-inspired computational paradigms like artificial immune systems and immunocomputing . We expect this paper to be of interest not only for mathematicians but also for biologists; therefore we made effort to explain mathematics in sufficient detail for readers without professional mathematical background

Field Assessment of Energy Audit Tools for Retrofit Programs

Energy Technology Data Exchange (ETDEWEB)

Edwards, J.; Bohac, D.; Nelson, C.; Smith, I.

2013-07-01

This project focused on the use of home energy ratings as a tool to promote energy retrofits in existing homes. A home energy rating provides a quantitative appraisal of a home's asset performance, usually compared to a benchmark such as the average energy use of similar homes in the same region. Home rating systems can help motivate homeowners in several ways. Ratings can clearly communicate a home's achievable energy efficiency potential, provide a quantitative assessment of energy savings after retrofits are completed, and show homeowners how they rate compared to their neighbors, thus creating an incentive to conform to a social standard. An important consideration is how rating tools for the retrofit market will integrate with existing home energy service programs. For residential programs that target energy savings only, home visits should be focused on key efficiency measures for that home. In order to gain wide adoption, a rating tool must be easily integrated into the field process, demonstrate consistency and reasonable accuracy to earn the trust of home energy technicians, and have a low monetary cost and time hurdle for homeowners. Along with the Home Energy Score, this project also evaluated the energy modeling performance of SIMPLE and REM/Rate.

Dosimetric characterization of an electronic portal imaging device (EPID) and development of a portal dosimetry simple model; Caracterizacion dosimetrica de un dispositivo electronico de imagen portal (EPID) y desarrollo de un modelo simple de dosimetria portal

Energy Technology Data Exchange (ETDEWEB)

Ripol ValentIn, O.; GarcIa Romero, A.; Hernandez Vitoria, A.; Jimenez Albericio, J.; Cortes Rodicio, J.; Millan Cebrian, E.; Ruiz Manzano, P.; Canellas Anoz, M.

2010-07-01

The use of the Electronic Portal Imaging Devices (EPID) for the quality control of linear accelerators of electrons is increasingly extended in practice. In this work the dosimetric characteristics of an EPID OptiVue{sup TM}1000 ST were studied and a friendly and simple method for the absorbed dose calibration was suggested. This method is based on a simple mathematical model, including: an absorbed dose transformation coefficient and image lag and field shape corrections. Software tools were developed in order to process the information and the results were validated by comparing them with the measured data with ionization chambers. The studied device showed suitable characteristics for its use for EPID dosimetry and the calculated results fitted satisfactorily with the dose planes obtained with the ionization chambers. Keeping in mind the model limitations, we concluded that it is possible to start the use of the EPID for the accelerator quality control and improvements for the current model should be studied, as well as other suitable applications: e.g. the Intensity Modulated Radiation Therapy (IMRT) treatment verification procedures. (Author).

A simple model for binary star evolution

International Nuclear Information System (INIS)

Whyte, C.A.; Eggleton, P.P.

1985-01-01

A simple model for calculating the evolution of binary stars is presented. Detailed stellar evolution calculations of stars undergoing mass and energy transfer at various rates are reported and used to identify the dominant physical processes which determine the type of evolution. These detailed calculations are used to calibrate the simple model and a comparison of calculations using the detailed stellar evolution equations and the simple model is made. Results of the evolution of a few binary systems are reported and compared with previously published calculations using normal stellar evolution programs. (author)

A Global Multi-Objective Optimization Tool for Design of Mechatronic Components using Generalized Differential Evolution

DEFF Research Database (Denmark)

Bech, Michael Møller; Nørgård, Christian; Roemer, Daniel Beck

2016-01-01

This paper illustrates how the relatively simple constrained multi-objective optimization algorithm Generalized Differential Evolution 3 (GDE3), can assist with the practical sizing of mechatronic components used in e.g. digital displacement fluid power machinery. The studied bi- and tri-objectiv......This paper illustrates how the relatively simple constrained multi-objective optimization algorithm Generalized Differential Evolution 3 (GDE3), can assist with the practical sizing of mechatronic components used in e.g. digital displacement fluid power machinery. The studied bi- and tri...... different optimization control parameter settings and it is concluded that GDE3 is a reliable optimization tool that can assist mechatronic engineers in the design and decision making process....

Extensions of the Johnson-Neyman Technique to Linear Models with Curvilinear Effects: Derivations and Analytical Tools

Science.gov (United States)

Miller, Jason W.; Stromeyer, William R.; Schwieterman, Matthew A.

2013-01-01

The past decade has witnessed renewed interest in the use of the Johnson-Neyman (J-N) technique for calculating the regions of significance for the simple slope of a focal predictor on an outcome variable across the range of a second, continuous independent variable. Although tools have been developed to apply this technique to probe 2- and 3-way…

Measurement of tool forces in diamond turning

Energy Technology Data Exchange (ETDEWEB)

Drescher, J.; Dow, T.A.

1988-12-01

A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

A Simple Flight Mill for the Study of Tethered Flight in Insects.

Science.gov (United States)

Attisano, Alfredo; Murphy, James T; Vickers, Andrew; Moore, Patricia J

2015-12-10

Flight in insects can be long-range migratory flights, intermediate-range dispersal flights, or short-range host-seeking flights. Previous studies have shown that flight mills are valuable tools for the experimental study of insect flight behavior, allowing researchers to examine how factors such as age, host plants, or population source can influence an insects' propensity to disperse. Flight mills allow researchers to measure components of flight such as speed and distance flown. Lack of detailed information about how to build such a device can make their construction appear to be prohibitively complex. We present a simple and relatively inexpensive flight mill for the study of tethered flight in insects. Experimental insects can be tethered with non-toxic adhesives and revolve around an axis by means of a very low friction magnetic bearing. The mill is designed for the study of flight in controlled conditions as it can be used inside an incubator or environmental chamber. The strongest points are the very simple electronic circuitry, the design that allows sixteen insects to fly simultaneously allowing the collection and analysis of a large number of samples in a short time and the potential to use the device in a very limited workspace. This design is extremely flexible, and we have adjusted the mill to accommodate different species of insects of various sizes.

A simple model for retrieving bare soil moisture from radar-scattering coefficients

International Nuclear Information System (INIS)

Chen, K.S.; Yen, S.K.; Huang, W.P.

1995-01-01

A simple algorithm based on a rough surface scattering model was developed to invert the bare soil moisture content from active microwave remote sensing data. In the algorithm development, a frequency mixing model was used to relate soil moisture to the dielectric constant. In particular, the Integral Equation Model (IEM) was used over a wide range of surface roughness and radar frequencies. To derive the algorithm, a sensitivity analysis was performed using a Monte Carlo simulation to study the effects of surface parameters, including height variance, correlation length, and dielectric constant. Because radar return is inherently dependent on both moisture content and surface roughness, the purpose of the sensitivity testing was to select the proper radar parameters so as to optimally decouple these two factors, in an attempt to minimize the effects of one while the other was observed. As a result, the optimal radar parameter ranges can be chosen for the purpose of soil moisture content inversion. One thousand samples were then generated with the IEM model followed by multivariate linear regression analysis to obtain an empirical soil moisture model. Numerical comparisons were made to illustrate the inversion performance using experimental measurements. Results indicate that the present algorithm is simple and accurate, and can be a useful tool for the remote sensing of bare soil surfaces. (author)

The three-item ALERT-B questionnaire provides a validated screening tool to detect chronic gastrointestinal symptoms after pelvic radiotherapy in cancer survivors

OpenAIRE

Taylor, Sophia; Byrne, Anthony; Adams, R.; Turner, J.; Hanna, L.; Staffurth, John Nicholas; Farnell, Damian; Sivell, Stephanie; Nelson, Annmarie; Green, J.

2016-01-01

Aims: Although pelvic radiotherapy is an effective treatment for various malignancies, around half of patients develop significant gastrointestinal problems. These symptoms often remain undetected, despite the existence of effective treatments. This study developed and refined a simple screening tool to detect common gastrointestinal symptoms in outpatient clinics. These symptoms have a significant effect on quality of life. This tool will increase detection rates and so enable access to spec...

Software Tools Streamline Project Management

Science.gov (United States)

2009-01-01

-Based Document Management (QBDM) is a tool that enables content or context searches, either simple or hierarchical, across a variety of databases. The system enables users to specify notification subscriptions where they associate "contexts of interest" and "events of interest" to one or more documents or collection(s) of documents. Based on these subscriptions, users receive notification when the events of interest occur within the contexts of interest for associated document or collection(s) of documents. Users can also associate at least one notification time as part of the notification subscription, with at least one option for the time period of notifications.

Genephony: a knowledge management tool for genome-wide research

Directory of Open Access Journals (Sweden)

Riva Alberto

2009-09-01

Full Text Available Abstract Background One of the consequences of the rapid and widespread adoption of high-throughput experimental technologies is an exponential increase of the amount of data produced by genome-wide experiments. Researchers increasingly need to handle very large volumes of heterogeneous data, including both the data generated by their own experiments and the data retrieved from publicly available repositories of genomic knowledge. Integration, exploration, manipulation and interpretation of data and information therefore need to become as automated as possible, since their scale and breadth are, in general, beyond the limits of what individual researchers and the basic data management tools in normal use can handle. This paper describes Genephony, a tool we are developing to address these challenges. Results We describe how Genephony can be used to manage large datesets of genomic information, integrating them with existing knowledge repositories. We illustrate its functionalities with an example of a complex annotation task, in which a set of SNPs coming from a genotyping experiment is annotated with genes known to be associated to a phenotype of interest. We show how, thanks to the modular architecture of Genephony and its user-friendly interface, this task can be performed in a few simple steps. Conclusion Genephony is an online tool for the manipulation of large datasets of genomic information. It can be used as a browser for genomic data, as a high-throughput annotation tool, and as a knowledge discovery tool. It is designed to be easy to use, flexible and extensible. Its knowledge management engine provides fine-grained control over individual data elements, as well as efficient operations on large datasets.

Experimental evidence for the co-evolution of hominin tool-making teaching and language.

Science.gov (United States)

Morgan, T J H; Uomini, N T; Rendell, L E; Chouinard-Thuly, L; Street, S E; Lewis, H M; Cross, C P; Evans, C; Kearney, R; de la Torre, I; Whiten, A; Laland, K N

2015-01-13

Hominin reliance on Oldowan stone tools-which appear from 2.5 mya and are believed to have been socially transmitted-has been hypothesized to have led to the evolution of teaching and language. Here we present an experiment investigating the efficacy of transmission of Oldowan tool-making skills along chains of adult human participants (N=184) using five different transmission mechanisms. Across six measures, transmission improves with teaching, and particularly with language, but not with imitation or emulation. Our results support the hypothesis that hominin reliance on stone tool-making generated selection for teaching and language, and imply that (i) low-fidelity social transmission, such as imitation/emulation, may have contributed to the ~700,000 year stasis of the Oldowan technocomplex, and (ii) teaching or proto-language may have been pre-requisites for the appearance of Acheulean technology. This work supports a gradual evolution of language, with simple symbolic communication preceding behavioural modernity by hundreds of thousands of years.

A remote sensing computer-assisted learning tool developed using the unified modeling language

Science.gov (United States)

Friedrich, J.; Karslioglu, M. O.

The goal of this work has been to create an easy-to-use and simple-to-make learning tool for remote sensing at an introductory level. Many students struggle to comprehend what seems to be a very basic knowledge of digital images, image processing and image arithmetic, for example. Because professional programs are generally too complex and overwhelming for beginners and often not tailored to the specific needs of a course regarding functionality, a computer-assisted learning (CAL) program was developed based on the unified modeling language (UML), the present standard for object-oriented (OO) system development. A major advantage of this approach is an easier transition from modeling to coding of such an application, if modern UML tools are being used. After introducing the constructed UML model, its implementation is briefly described followed by a series of learning exercises. They illustrate how the resulting CAL tool supports students taking an introductory course in remote sensing at the author's institution.

The new designs of diamond drill bits for composite polymers tooling

Directory of Open Access Journals (Sweden)

Ruslan Yu. Melentiev

2015-12-01

Full Text Available The author explores the drilling operation of some new engineering materials such as carbon fiber reinforced plastics (CFRP and other polymers that have an anisotropic structure, high-strength and elastic properties combined with low heat endurance. Such combination of properties makes impossible the simple transfer of the existing technologies for classic materials working to considered new class. At the same time, the existing tools cannot assure the specified quality of tooled products at the current productivity and tool life. Aim: The aim of this research is to increase the process efficiency of diamond drilling in composite polymers by developing the new designs of diamond drill bits. Materials and Methods: One of the most promising directions to solve this problem is the diamond coated abrasive type tool. This paper addresses and classifies the existing types of diamond drill bits according to their application and operation. The literature data analysis of known disadvantages during drilling operation, the quality of surface and joining face was performed. Results: The experimental researches of the author prove the negative meaning of the already known but kept out fact – the drill core blocking. The most important factors and structural features affecting the CFRP drilling process are revealed. The accounting of these factors allowed creating the set of unique designs of diamond drill bits for different purposes. The presented patented models has different allowance distribution schemes and cutting forces, thus satisfy the mechanical requirements of quality, productivity, tool life and hole geometry in the tooling of the specified material class.

Development and validation of a simple questionnaire for the identification of hereditary breast cancer in primary care

Directory of Open Access Journals (Sweden)

Palmero Edenir I

2009-08-01

Full Text Available Abstract Background Breast cancer is a significant public health problem worldwide and the development of tools to identify individuals at-risk for hereditary breast cancer syndromes, where specific interventions can be proposed to reduce risk, has become increasingly relevant. A previous study in Southern Brazil has shown that a family history suggestive of these syndromes may be prevalent at the primary care level. Development of a simple and sensitive instrument, easily applicable in primary care units, would be particularly helpful in underserved communities in which identification and referral of high-risk individuals is difficult. Methods A simple 7-question instrument about family history of breast, ovarian and colorectal cancer, FHS-7, was developed to screen for individuals with an increased risk for hereditary breast cancer syndromes. FHS-7 was applied to 9218 women during routine visits to primary care units in Southern Brazil. Two consecutive samples of 885 women and 910 women who answered positively to at least one question and negatively to all questions were included, respectively. The sensitivity, specificity and positive and negative predictive values were determined. Results Of the 885 women reporting a positive family history, 211 (23.8%; CI95%: 21.5–26.2 had a pedigree suggestive of a hereditary breast and/or breast and colorectal cancer syndrome. Using as cut point one positive answer, the sensitivity and specificity of the instrument were 87.6% and 56.4%, respectively. Concordance between answers in two different applications was given by a intra-class correlation (ICC of 0.84 for at least one positive answer. Temporal stability of the instrument was adequate (ICC = 0.65. Conclusion A simple instrument for the identification of the most common hereditary breast cancer syndrome phenotypes, showing good specificity and temporal stability was developed and could be used as a screening tool in primary care to refer at

A discussion of tools and techniques for distributed processor based control systems using CAMAC

International Nuclear Information System (INIS)

Tippie, J.W.; Scandora, A.E.

1985-01-01

This paper describes and analyzes various distributed processor architectures using commercially available CAMAC components. The general orientation is toward distributed control systems using Digital Equipment Corporation LSI11 processors in a CAMAC environment. The paper describes in detail software tools available to simplify the development of applications software and to provide a high-level runtime environment both at the host and the remote processors. Discussion focuses on techniques for downloading of operating systems from a large host and applications tasks written in high-level languages. It also discusses software tools which enable tasks in the remote processors to exchange messages and data with tasks in the host in a simple and elegant way

Structural and computational aspects of simple and influence games

OpenAIRE

Riquelme Csori, Fabián

2014-01-01

Simple games are a fundamental class of cooperative games. They have a huge relevance in several areas of computer science, social sciences and discrete applied mathematics. The algorithmic and computational complexity aspects of simple games have been gaining notoriety in the recent years. In this thesis we review different computational problems related to properties, parameters, and solution concepts of simple games. We consider different forms of representation of simple games, regular...

Simple and Effective Algorithms: Computer-Adaptive Testing.

Science.gov (United States)

Linacre, John Michael

Computer-adaptive testing (CAT) allows improved security, greater scoring accuracy, shorter testing periods, quicker availability of results, and reduced guessing and other undesirable test behavior. Simple approaches can be applied by the classroom teacher, or other content specialist, who possesses simple computer equipment and elementary…

Drug–drug interaction of microdose and regular-dose omeprazole with a CYP2C19 inhibitor and inducer

OpenAIRE

Park G; Bae SH; Park W; Han S; Park M; Shin S; Shin YG; Yim DS

2017-01-01

Gab-jin Park,1 Soo Hyeon Bae,1 Wan-Su Park,1 Seunghoon Han,1 Min-Ho Park,2 Seok-Ho Shin,2 Young G Shin,2 Dong-Seok Yim1,2 1Department of Clinical Pharmacology and Therapeutics, Seoul St Mary’s Hospital, PIPET (Pharmacometrics Institute for Practical Education and Training), College of Medicine, Catholic University of Korea, Seoul, South Korea; 2College of Pharmacy, Chungnam National University, Daejeon, South Korea Purpose: A microdose drug–drug interaction (DDI) study may be a ...

PharmML in Action: an Interoperable Language for Modeling and Simulation

Science.gov (United States)

Bizzotto, R; Smith, G; Yvon, F; Kristensen, NR; Swat, MJ

2017-01-01

PharmML1 is an XML‐based exchange format2, 3, 4 created with a focus on nonlinear mixed‐effect (NLME) models used in pharmacometrics,5, 6 but providing a very general framework that also allows describing mathematical and statistical models such as single‐subject or nonlinear and multivariate regression models. This tutorial provides an overview of the structure of this language, brief suggestions on how to work with it, and use cases demonstrating its power and flexibility. PMID:28575551

Validation of the simpleFoam (RANS solver for the atmospheric boundary layer in complex terrain

Directory of Open Access Journals (Sweden)

Peralta C.

2014-01-01

Full Text Available We validate the simpleFoam (RANS solver in OpenFOAM (version 2.1.1 for simulating neutral atmospheric boundary layer flows in complex terrain. Initial and boundary conditions are given using Richards and Hoxey proposal [1]. In order to obtain stable simulation of the ABL, modified wall functions are used to set the near-wall boundary conditions, following Blocken et al remedial measures [2]. A structured grid is generated with the new library terrainBlockMesher [3,4], based on OpenFOAM's blockMesh native mesher. The new tool is capable of adding orographic features and the forest canopy. Additionally, the mesh can be refined in regions with complex orography. We study both the classical benchmark case of Askervein hill [5] and the more recent Bolund island data set [6]. Our purpose is two-folded: to validate the performance of OpenFOAM steady state solvers, and the suitability of the new meshing tool to generate high quality structured meshes, which will be used in the future for performing more computationally intensive LES simulations in complex terrain.

Parallel processing and learning in simple systems. Final report, 10 January 1986-14 January 1989

Energy Technology Data Exchange (ETDEWEB)

Mpitsos, G.J.

1989-03-15

Work over the three-year tenure of this grant has dealt with interrelated studies of (1) neuropharmacology, (2) behavior, and (3) distributed/parallel processing in the generation of variable motor patterns in the buccal-oral system of the sea slug Pleurobranchaea californica. (4) Computer simulations of simple neutral networks have been undertaken to examine neurointegrative principles that could not be examined in biological preparations. The simulation work has set the basis for further simulations dealing with networks having characteristics relating to real neurons. All of the work has had the goal of developing interdisciplinary tools for understanding the scale-independent problem of how individuals, each possessing only local knowledge of group activity, act within a group to produce different and variable adaptive outputs, and, in turn, of how the group influences the activity of the individual. The pharmacologic studies have had the goal of developing biochemical tools with which to identify groups of neurons that perform specific tasks during the production of a given behavior but are multifunctional by being critically involved in generating several different behaviors.

Analysis of functionality free CASE-tools databases design

Directory of Open Access Journals (Sweden)

A. V. Gavrilov

2016-01-01

Full Text Available The introduction in the educational process of database design CASEtechnologies requires the institution of significant costs for the purchase of software. A possible solution could be the use of free software peers. At the same time this kind of substitution should be based on even-com representation of the functional characteristics and features of operation of these programs. The purpose of the article – a review of the free and non-profi t CASE-tools database design, as well as their classifi cation on the basis of the analysis functionality. When writing this article were used materials from the offi cial websites of the tool developers. Evaluation of the functional characteristics of CASEtools for database design made exclusively empirically with the direct work with software products. Analysis functionality of tools allow you to distinguish the two categories CASE-tools database design. The first category includes systems with a basic set of features and tools. The most important basic functions of these systems are: management connections to database servers, visual tools to create and modify database objects (tables, views, triggers, procedures, the ability to enter and edit data in table mode, user and privilege management tools, editor SQL-code, means export/import data. CASE-system related to the first category can be used to design and develop simple databases, data management, as well as a means of administration server database. A distinctive feature of the second category of CASE-tools for database design (full-featured systems is the presence of visual designer, allowing to carry out the construction of the database model and automatic creation of the database on the server based on this model. CASE-system related to this categories can be used for the design and development of databases of any structural complexity, as well as a database server administration tool. The article concluded that the

Generation of orientation tools for automated zebrafish screening assays using desktop 3D printing

OpenAIRE

Wittbrodt, Jonas N.; Liebel, Urban; Gehrig, Jochen

2014-01-01

Background The zebrafish has been established as the main vertebrate model system for whole organism screening applications. However, the lack of consistent positioning of zebrafish embryos within wells of microtiter plates remains an obstacle for the comparative analysis of images acquired in automated screening assays. While technical solutions to the orientation problem exist, dissemination is often hindered by the lack of simple and inexpensive ways of distributing and duplicating tools. ...

ThinkHazard!: an open-source, global tool for understanding hazard information

Science.gov (United States)

Fraser, Stuart; Jongman, Brenden; Simpson, Alanna; Nunez, Ariel; Deparday, Vivien; Saito, Keiko; Murnane, Richard; Balog, Simone

2016-04-01

Rapid and simple access to added-value natural hazard and disaster risk information is a key issue for various stakeholders of the development and disaster risk management (DRM) domains. Accessing available data often requires specialist knowledge of heterogeneous data, which are often highly technical and can be difficult for non-specialists in DRM to find and exploit. Thus, availability, accessibility and processing of these information sources are crucial issues, and an important reason why many development projects suffer significant impacts from natural hazards. The World Bank's Global Facility for Disaster Reduction and Recovery (GFDRR) is currently developing a new open-source tool to address this knowledge gap: ThinkHazard! The main aim of the ThinkHazard! project is to develop an analytical tool dedicated to facilitating improvements in knowledge and understanding of natural hazards among non-specialists in DRM. It also aims at providing users with relevant guidance and information on handling the threats posed by the natural hazards present in a chosen location. Furthermore, all aspects of this tool will be open and transparent, in order to give users enough information to understand its operational principles. In this presentation, we will explain the technical approach behind the tool, which translates state-of-the-art probabilistic natural hazard data into understandable hazard classifications and practical recommendations. We will also demonstrate the functionality of the tool, and discuss limitations from a scientific as well as an operational perspective.

A least-squares computational ``tool kit``. Nuclear data and measurements series

Energy Technology Data Exchange (ETDEWEB)

Smith, D.L.

1993-04-01

The information assembled in this report is intended to offer a useful computational ``tool kit`` to individuals who are interested in a variety of practical applications for the least-squares method of parameter estimation. The fundamental principles of Bayesian analysis are outlined first and these are applied to development of both the simple and the generalized least-squares conditions. Formal solutions that satisfy these conditions are given subsequently. Their application to both linear and non-linear problems is described in detail. Numerical procedures required to implement these formal solutions are discussed and two utility computer algorithms are offered for this purpose (codes LSIOD and GLSIOD written in FORTRAN). Some simple, easily understood examples are included to illustrate the use of these algorithms. Several related topics are then addressed, including the generation of covariance matrices, the role of iteration in applications of least-squares procedures, the effects of numerical precision and an approach that can be pursued in developing data analysis packages that are directed toward special applications.

A GUI-based intuitive tool for analyzing formats and extracting contents of binary data in fusion research

International Nuclear Information System (INIS)

Naito, O.

2015-01-01

Highlights: • A GUI-based intuitive tool for data format analysis is presented. • Data can be viewed in any data types specified by the user in real time. • Analyzed formats are saved and reused as templates for other data of the same forms. • Users can easily extract contents in any forms by writing a simple script file. • The tool would be useful for exchanging data in collaborative fusion researches. - Abstract: An intuitive tool with graphical user interface (GUI) for analyzing formats and extracting contents of binary data in fusion research is presented. Users can examine structures of binary data at arbitrary addresses by selecting their type from a list of radio buttons in the data inspection window and checking their representations instantly on the computer screen. The result of analysis is saved in a file which contains the information such as name, data type, start address, and array size of the data. If the array size of some data depends on others that appear prior to the former and if the users specify their relation in the inspection window, the resultant file can also be used as a format template for the same series of data. By writing a simple script, the users can extract the contents of data either to a text or binary file in the format of their preference. As a real-life example, the tool is applied to the MHD equilibrium data at JT-60U, where poloidal flux data are extracted and converted to a format suitable for contour plotting in other data visualization program. The tool would be useful in collaborative fusion researches for exchanging relatively small-size data, which don’t fit in well with the standard routine processes

CRITICAL RADAR: TOOL AND METHODOLOGY FOR EVALUATING CURRENT PROJECTS USING MULTIPLE VARIABLES

Directory of Open Access Journals (Sweden)

André M. Ferrari

2017-06-01

Full Text Available Many resources are invested in measurement processes of projects indicators without, however, give a clear view of which projects deserves the right attention at the right time. This paper proposes the use of statistics, through the analysis of multiple variables and their interrelationships, to give better basis to a critical assessment methodology of current projects used in a multinational mining company. The contribution of the research is to report the methodology called Critical Radar which is based on a graphical tool with simple operationalization that can support the decision making in complex environments, and has great flexibility across the different market scenarios and possible changes in companies guidelines. The tool has great potential to help evaluate current projects due to their characteristics of flexible use in different business areas; high degree of freedom for improvement; use of known market tool in its development; ease of viewing the results through charts and notes and user freedom to use any existing indicators in the company if complied with some statistical data quality characteristics.

Three-Dimensional Online Visualization and Engagement Tools for the Geosciences

Science.gov (United States)

Cockett, R.; Moran, T.; Pidlisecky, A.

2013-12-01

Educational tools often sacrifice interactivity in favour of scalability so they can reach more users. This compromise leads to tools that may be viewed as second tier when compared to more engaging activities performed in a laboratory; however, the resources required to deliver laboratory exercises that are scalable is often impractical. Geoscience education is well situated to benefit from interactive online learning tools that allow users to work in a 3D environment. Visible Geology (http://3ptscience.com/visiblegeology) is an innovative web-based application designed to enable visualization of geologic structures and processes through the use of interactive 3D models. The platform allows users to conceptualize difficult, yet important geologic principles in a scientifically accurate manner by developing unique geologic models. The environment allows students to interactively practice their visualization and interpretation skills by creating and interacting with their own models and terrains. Visible Geology has been designed from a user centric perspective resulting in a simple and intuitive interface. The platform directs students to build there own geologic models by adding beds and creating geologic events such as tilting, folding, or faulting. The level of ownership and interactivity encourages engagement, leading learners to discover geologic relationships on their own, in the context of guided assignments. In January 2013, an interactive geologic history assignment was developed for a 700-student introductory geology class at The University of British Columbia. The assignment required students to distinguish the relative age of geologic events to construct a geologic history. Traditionally this type of exercise has been taught through the use of simple geologic cross-sections showing crosscutting relationships; from these cross-sections students infer the relative age of geologic events. In contrast, the Visible Geology assignment offers students a unique

FORMAL MODELLING OF BUSINESS RULES: WHAT KIND OF TOOL TO USE?

Directory of Open Access Journals (Sweden)

Sandra Lovrenčić

2006-12-01

Full Text Available Business rules are today essential parts of a business system model. But presently, there are still various approaches to, definitions and classifications of this concept. Similarly, there are also different approaches in business rules formalization and implementation. This paper investigates formalization using formal language in association with easy domain modelling. Two of the tools that enable such approach are described and compared according to several factors. They represent ontology modelling and UML, nowadays widely used standard for object-oriented modelling. A simple example is also presented.

CONFUSION IN SIMPLE STATE / YALIN DURUM KARMAŞASI

Directory of Open Access Journals (Sweden)

Assoc. Prof. Dr. Kerime ÜSTÜNOVA

2007-05-01

Full Text Available The simple state which is shown with zero form unit in Turkish is a type of state incorporating language units that are at position of subject. Therefore only the language units that assume "noun” and “pronoun” functions are able to stay in simple state. Even if they are of noun origin, because adjectives, adverbs, prepositions, conjunctions and exclamations can not enter into noun state inflection, they do not show the characteristic of simple state. However the language units having assumed the function of a noun may only enter into simple state inflection if they undertake the function of indicating the work, event, rendering and one who performs the action, establishing a connection with the verb.

A ligand predication tool based on modeling and reasoning with imprecise probabilistic knowledge.

Science.gov (United States)

Liu, Weiru; Yue, Anbu; Timson, David J

2010-04-01

Ligand prediction has been driven by a fundamental desire to understand more about how biomolecules recognize their ligands and by the commercial imperative to develop new drugs. Most of the current available software systems are very complex and time-consuming to use. Therefore, developing simple and efficient tools to perform initial screening of interesting compounds is an appealing idea. In this paper, we introduce our tool for very rapid screening for likely ligands (either substrates or inhibitors) based on reasoning with imprecise probabilistic knowledge elicited from past experiments. Probabilistic knowledge is input to the system via a user-friendly interface showing a base compound structure. A prediction of whether a particular compound is a substrate is queried against the acquired probabilistic knowledge base and a probability is returned as an indication of the prediction. This tool will be particularly useful in situations where a number of similar compounds have been screened experimentally, but information is not available for all possible members of that group of compounds. We use two case studies to demonstrate how to use the tool. 2009 Elsevier Ireland Ltd. All rights reserved.

Towards diagnostic tools for analysing Swarm data through model retrievals

DEFF Research Database (Denmark)

Kotsiaros, Stavros; Plank, Gernot; Haagmans, R.

polar orbits between 300 and 550 km altitude. Goal of the current study is to build tools and to analyze datasets, in order to allow a fast diagnosis of the Swarm system performance in orbit during the commission phase and operations of the spacecraft. The effects on the reconstruction of the magnetic...... field resulting from various error sources are investigated. By using a specially developed software package closed loop simulations are performed aiming at different scenarios. We start from the simple noise-free case and move on to more complex and realistic situations which include attitude errors...

Headspace-SPME-GC/MS as a simple cleanup tool for sensitive 2,6-diisopropylphenol analysis from lipid emulsions and adaptable to other matrices.

Science.gov (United States)

Pickl, Karin E; Adamek, Viktor; Gorges, Roland; Sinner, Frank M

2011-07-15

Due to increased regulatory requirements, the interaction of active pharmaceutical ingredients with various surfaces and solutions during production and storage is gaining interest in the pharmaceutical research field, in particular with respect to development of new formulations, new packaging material and the evaluation of cleaning processes. Experimental adsorption/absorption studies as well as the study of cleaning processes require sophisticated analytical methods with high sensitivity for the drug of interest. In the case of 2,6-diisopropylphenol - a small lipophilic drug which is typically formulated as lipid emulsion for intravenous injection - a highly sensitive method in the concentration range of μg/l suitable to be applied to a variety of different sample matrices including lipid emulsions is needed. We hereby present a headspace-solid phase microextraction (HS-SPME) approach as a simple cleanup procedure for sensitive 2,6-diisopropylphenol quantification from diverse matrices choosing a lipid emulsion as the most challenging matrix with regard to complexity. By combining the simple and straight forward HS-SPME sample pretreatment with an optimized GC-MS quantification method a robust and sensitive method for 2,6-diisopropylphenol was developed. This method shows excellent sensitivity in the low μg/l concentration range (5-200μg/l), good accuracy (94.8-98.8%) and precision (intraday-precision 0.1-9.2%, inter-day precision 2.0-7.7%). The method can be easily adapted to other, less complex, matrices such as water or swab extracts. Hence, the presented method holds the potential to serve as a single and simple analytical procedure for 2,6-diisopropylphenol analysis in various types of samples such as required in, e.g. adsorption/absorption studies which typically deal with a variety of different surfaces (steel, plastic, glass, etc.) and solutions/matrices including lipid emulsions. Copyright © 2011 Elsevier B.V. All rights reserved.

Direct Simple Shear Test Data Analysis using Jupyter Notebooks on DesignSafe-CI

Science.gov (United States)

Eslami, M.; Esteva, M.; Brandenberg, S. J.

2017-12-01

Due to the large number of files and their complex structure, managing data generated during natural hazards experiments requires scalable and specialized tools. DesignSafe-CI (https://www.designsafe-ci.org/) is a web-based research platform that provides computational tools to analyze, curate, and publish critical data for natural hazards research making it understandable and reusable. We present a use case from a series of Direct Simple Shear (DSS) experiments in which we used DS-CI to post-process, visualize, publish, and enable further analysis of the data. Current practice in geotechnical design against earthquakes relies on the soil's plasticity index (PI) to assess liquefaction susceptibility, and cyclic softening triggering procedures, although, quite divergent recommendations on recommended levels of plasticity can be found in the literature for these purposes. A series of cyclic and monotonic direct simple shear experiments was conducted on three low-plasticity fine-grained mixtures at the same plasticity index to examine the effectiveness of the PI in characterization of these types of materials. Results revealed that plasticity index is an insufficient indicator of the cyclic behavior of low-plasticity fine-grained soils, and corrections for pore fluid chemistry and clay minerology may be necessary for future liquefaction susceptibility and cyclic softening assessment procedures. Each monotonic, or cyclic experiment contains two stages; consolidation and shear, which include time series of load, displacement, and corresponding stresses and strains, as well as equivalent excess pore-water pressure. Using the DS-CI curation pipeline we categorized the data to display and describe the experiment's structure and files corresponding to each stage of the experiments. Two separate notebooks in Python 3 were created using the Jupyter application available in DS-CI. A data plotter aids visualizing the experimental data in relation to the sensor from which it was

Asymmetric simple exclusion process with position-dependent hopping rates: Phase diagram from boundary-layer analysis.

Science.gov (United States)

Mukherji, Sutapa

2018-03-01

In this paper, we study a one-dimensional totally asymmetric simple exclusion process with position-dependent hopping rates. Under open boundary conditions, this system exhibits boundary-induced phase transitions in the steady state. Similarly to totally asymmetric simple exclusion processes with uniform hopping, the phase diagram consists of low-density, high-density, and maximal-current phases. In various phases, the shape of the average particle density profile across the lattice including its boundary-layer parts changes significantly. Using the tools of boundary-layer analysis, we obtain explicit solutions for the density profile in different phases. A detailed analysis of these solutions under different boundary conditions helps us obtain the equations for various phase boundaries. Next, we show how the shape of the entire density profile including the location of the boundary layers can be predicted from the fixed points of the differential equation describing the boundary layers. We discuss this in detail through several examples of density profiles in various phases. The maximal-current phase appears to be an especially interesting phase where the boundary layer flows to a bifurcation point on the fixed-point diagram.

A simple mathematical procedure to estimate heat flux in machining using measured surface temperature with infrared laser

Directory of Open Access Journals (Sweden)

Hocine Mzad

2015-09-01

Full Text Available Several techniques have been developed over time for the measurement of heat and the temperatures generated in various manufacturing processes and tribological applications. Each technique has its own advantages and disadvantages. The appropriate technique for temperature measurement depends on the application under consideration as well as the available tools for measurement. This paper presents a procedure for a simple and accurate determination of the time-varying heat flux at the workpiece–tool interface of three different metals under known cutting conditions. A portable infrared thermometer is used for surface temperature measurements. A spline smoothing interpolation of the surface temperature history enables to determine the local heat flux produced during stock removal. The measured temperature is represented by a third-order spline approximation. Nonetheless, the accuracy of polynomial interpolation depends on how close are the interpolated points; an increase in degree cannot be used to increase the accuracy. Although the data analysis is relatively complicated, the computing time is very small.

Laterality of Grooming and Tool Use in a Group of Captive Bonobos (Pan paniscus).

Science.gov (United States)

Brand, Colin M; Marchant, Linda F; Boose, Klaree J; White, Frances J; Rood, Tabatha M; Meinelt, Audra

2017-01-01

Humans exhibit population level handedness for the right hand; however, the evolution of this behavioral phenotype is poorly understood. Here, we compared the laterality of a simple task (grooming) and a complex task (tool use) to investigate whether increasing task difficulty elicited individual hand preference among a group of captive bonobos (Pan paniscus). Subjects were 17 bonobos housed at the Columbus Zoo and Aquarium. Laterality of grooming was recorded using group scans; tool use was recorded using all-occurrence sampling. Grooming was characterized as unimanual or bimanual, and both tasks were scored as right-handed or left-handed. Most individuals did not exhibit significant hand preference for unimanual or bimanual (asymmetrical hand use) grooming, although 1 individual was lateralized for each. For the 8 subjects who engaged in termite fishing enough for statistical testing, 7 individuals exhibited significant laterality and strong individual hand preference. Four subjects preferred their left hand, 3 preferred their right, and 1 had no preference. Grooming, a simple behavior, was not lateralized in this group, yet a more complex behavior revealed a strong individual hand preference, and these results are congruent with other recent findings that demonstrate complex tasks elicit hand preference in bonobos. © 2017 S. Karger AG, Basel.

Simple Lie algebras and Dynkin diagrams

International Nuclear Information System (INIS)

Buccella, F.

1983-01-01

The following theorem is studied: in a simple Lie algebra of rank p there are p positive roots such that all the other n-3p/2 positive roots are linear combinations of them with integer non negative coefficients. Dykin diagrams are built by representing the simple roots with circles and drawing a junction between the roots. Five exceptional algebras are studied, focusing on triple junction algebra, angular momentum algebra, weights of the representation, antisymmetric tensors, and subalgebras

Unicameral (simple) bone cysts.

Science.gov (United States)

Baig, Rafath; Eady, John L

2006-09-01

Since their original description by Virchow, simple bone cysts have been studied repeatedly. Although these defects are not true neoplasms, simple bone cysts may create major structural defects of the humerus, femur, and os calcis. They are commonly discovered incidentally when x-rays are taken for other reasons or on presentation due to a pathologic fracture. Various treatment strategies have been employed, but the only reliable predictor of success of any treatment strategy is the age of the patient; those being older than 10 years of age heal their cysts at a higher rate than those under age 10. The goal of management is the formation of a bone that can withstand the stresses of use by the patient without evidence of continued bone destruction as determined by serial radiographic follow-up. The goal is not a normal-appearing x-ray, but a functionally stable bone.

Sorting protein lists with nwCompare: a simple and fast algorithm for n-way comparison of proteomic data files.

Science.gov (United States)

Pont, Frédéric; Fournié, Jean Jacques

2010-03-01

MS, the reference technology for proteomics, routinely produces large numbers of protein lists whose fast comparison would prove very useful. Unfortunately, most softwares only allow comparisons of two to three lists at once. We introduce here nwCompare, a simple tool for n-way comparison of several protein lists without any query language, and exemplify its use with differential and shared cancer cell proteomes. As the software compares character strings, it can be applied to any type of data mining, such as genomic or metabolomic datalists.

Omics Informatics: From Scattered Individual Software Tools to Integrated Workflow Management Systems.

Science.gov (United States)

Ma, Tianle; Zhang, Aidong

2017-01-01

Omic data analyses pose great informatics challenges. As an emerging subfield of bioinformatics, omics informatics focuses on analyzing multi-omic data efficiently and effectively, and is gaining momentum. There are two underlying trends in the expansion of omics informatics landscape: the explosion of scattered individual omics informatics tools with each of which focuses on a specific task in both single- and multi- omic settings, and the fast-evolving integrated software platforms such as workflow management systems that can assemble multiple tools into pipelines and streamline integrative analysis for complicated tasks. In this survey, we give a holistic view of omics informatics, from scattered individual informatics tools to integrated workflow management systems. We not only outline the landscape and challenges of omics informatics, but also sample a number of widely used and cutting-edge algorithms in omics data analysis to give readers a fine-grained view. We survey various workflow management systems (WMSs), classify them into three levels of WMSs from simple software toolkits to integrated multi-omic analytical platforms, and point out the emerging needs for developing intelligent workflow management systems. We also discuss the challenges, strategies and some existing work in systematic evaluation of omics informatics tools. We conclude by providing future perspectives of emerging fields and new frontiers in omics informatics.

GOSSIP, a New VO Compliant Tool for SED Fitting

Science.gov (United States)

Franzetti, P.; Scodeggio, M.; Garilli, B.; Fumana, M.; Paioro, L.

2008-08-01

We present GOSSIP (Galaxy Observed-Simulated SED Interactive Program), a new tool developed to perform SED fitting in a simple, user friendly and efficient way. GOSSIP automatically builds-up the observed SED of an object (or a large sample of objects) combining magnitudes in different bands and eventually a spectrum; then it performs a χ^2 minimization fitting procedure versus a set of synthetic models. The fitting results are used to estimate a number of physical parameters like the Star Formation History, absolute magnitudes, stellar mass and their Probability Distribution Functions. User defined models can be used, but GOSSIP is also able to load models produced by the most commonly used synthesis population codes. GOSSIP can be used interactively with other visualization tools using the PLASTIC protocol for communications. Moreover, since it has been developed with large data sets applications in mind, it will be extended to operate within the Virtual Observatory framework. GOSSIP is distributed to the astronomical community from the PANDORA group web site (http://cosmos.iasf-milano.inaf.it/pandora/gossip.html).

What Is a Simple Liquid?

Directory of Open Access Journals (Sweden)

Trond S. Ingebrigtsen

2012-03-01

Full Text Available This paper is an attempt to identify the real essence of simplicity of liquids in John Locke’s understanding of the term. Simple liquids are traditionally defined as many-body systems of classical particles interacting via radially symmetric pair potentials. We suggest that a simple liquid should be defined instead by the property of having strong correlations between virial and potential-energy equilibrium fluctuations in the NVT ensemble. There is considerable overlap between the two definitions, but also some notable differences. For instance, in the new definition simplicity is not a direct property of the intermolecular potential because a liquid is usually only strongly correlating in part of its phase diagram. Moreover, not all simple liquids are atomic (i.e., with radially symmetric pair potentials and not all atomic liquids are simple. The main part of the paper motivates the new definition of liquid simplicity by presenting evidence that a liquid is strongly correlating if and only if its intermolecular interactions may be ignored beyond the first coordination shell (FCS. This is demonstrated by NVT simulations of the structure and dynamics of several atomic and three molecular model liquids with a shifted-forces cutoff placed at the first minimum of the radial distribution function. The liquids studied are inverse power-law systems (r^{-n} pair potentials with n=18,6,4, Lennard-Jones (LJ models (the standard LJ model, two generalized Kob-Andersen binary LJ mixtures, and the Wahnstrom binary LJ mixture, the Buckingham model, the Dzugutov model, the LJ Gaussian model, the Gaussian core model, the Hansen-McDonald molten salt model, the Lewis-Wahnstrom ortho-terphenyl model, the asymmetric dumbbell model, and the single-point charge water model. The final part of the paper summarizes properties of strongly correlating liquids, emphasizing that these are simpler than liquids in general. Simple liquids, as defined here, may be

A simple method to calculate first-passage time densities with arbitrary initial conditions

Science.gov (United States)

Nyberg, Markus; Ambjörnsson, Tobias; Lizana, Ludvig

2016-06-01

Numerous applications all the way from biology and physics to economics depend on the density of first crossings over a boundary. Motivated by the lack of general purpose analytical tools for computing first-passage time densities (FPTDs) for complex problems, we propose a new simple method based on the independent interval approximation (IIA). We generalise previous formulations of the IIA to include arbitrary initial conditions as well as to deal with discrete time and non-smooth continuous time processes. We derive a closed form expression for the FPTD in z and Laplace-transform space to a boundary in one dimension. Two classes of problems are analysed in detail: discrete time symmetric random walks (Markovian) and continuous time Gaussian stationary processes (Markovian and non-Markovian). Our results are in good agreement with Langevin dynamics simulations.

IT-based wellness tools for older adults: Design concepts and feedback.

Science.gov (United States)

Joe, Jonathan; Hall, Amanda; Chi, Nai-Ching; Thompson, Hilaire; Demiris, George

2018-03-01

To explore older adults' preferences regarding e-health applications through use of generated concepts that inform wellness tool design. The 6-8-5 method and affinity mapping were used to create e-health design ideas that were translated into storyboards and scenarios. Focus groups were conducted to obtain feedback on the prototypes and included participant sketching. A qualitative analysis of the focus groups for emerging themes was conducted, and sketches were analyzed. Forty-three older adults participated in six focus group sessions. The majority of participants found the wellness tools useful. Preferences included features that supported participants in areas of unmet needs, such as ability to find reliable health information, cognitive training, or maintaining social ties. Participants favored features such as use of voice navigation, but were concerned over cost and the need for technology skills and access. Sketches reinforced these wants, including portability, convenience, and simplicity. Several factors were found to increase the desirability of such devices including convenient access to their health and health information, a simple, accessible interface, and support for memory issues. Researchers and designers should incorporate the feedback of older adults regarding wellness tools, so that future designs meet the needs of older adults.

Analytical and numerical tools for vacuum systems

CERN Document Server

Kersevan, R

2007-01-01

Modern particle accelerators have reached a level of sophistication which require a thorough analysis of all their sub-systems. Among the latter, the vacuum system is often a major contributor to the operating performance of a particle accelerator. The vacuum engineer has nowadays a large choice of computational schemes and tools for the correct analysis, design, and engineering of the vacuum system. This paper is a review of the different type of algorithms and methodologies which have been developed and employed in the field since the birth of vacuum technology. The different level of detail between simple back-of-the-envelope calculations and more complex numerical analysis is discussed by means of comparisons. The domain of applicability of each method is discussed, together with its pros and cons.

Evaluation of professional practices and quality management: use of some tools in nuclear medicine

International Nuclear Information System (INIS)

Israel, J.M.

2009-01-01

The walk to continue quality improvement is an obligation in all French health structures and the departments of nuclear medicine have to take part in, particularly for the evaluation of professional practices (E.P.P.). This work meant to show how simple and classical tools (process analysis, scheme of Ishikawa, '5M' method, logo-grams, EFQM or Shortell methods) could be used to impulse an E.P.P. according to the rules proposed by the 'Haute Autorite de sante'. We try to show how these tools can be used to analyze and solve practical as managerial problems. For example, we set out a process analysis of nuclear medicine acts in several levels of discrimination. Lastly, we expose some classical problems in the application of the E.P.P.. The aim of this article is not to offer ready-made solutions, but only to show what is possible with these user-friendly tools. (author)

Simple stålrammebygninger

DEFF Research Database (Denmark)

Ellum, J.C.

Anvisningen gennemgår dimensioneringen og bringer detaljerede konstruktionstegninger til simple stålrammebygninger, dvs. lukkede, fritliggende bygninger i én etage, hvor tagkonstruktionen ud over egenlast kun er påvirket af naturlaster, dvs. sne og vind. Dimensioneringen sker ved at udfylde et di...

Optimizing Libraries’ Content Findability Using Simple Object Access Protocol (SOAP) With Multi-Tier Architecture

Science.gov (United States)

Lahinta, A.; Haris, I.; Abdillah, T.

2017-03-01

The aim of this paper is to describe a developed application of Simple Object Access Protocol (SOAP) as a model for improving libraries’ digital content findability on the library web. The study applies XML text-based protocol tools in the collection of data about libraries’ visibility performance in the search results of the book. Model from the integrated Web Service Document Language (WSDL) and Universal Description, Discovery and Integration (UDDI) are applied to analyse SOAP as element within the system. The results showed that the developed application of SOAP with multi-tier architecture can help people simply access the website in the library server Gorontalo Province and support access to digital collections, subscription databases, and library catalogs in each library in Regency or City in Gorontalo Province.

GOKaRT: Graphical Online Search Tool for Maps

Directory of Open Access Journals (Sweden)

Mechthild Schüler

2008-09-01

Full Text Available The map department of the Staats- und Universitätsbibliothek Göttingen together with the Berlin State Library propose a project to develop a web-based graphic cataloguing and search system for maps, to be funded by the German Research Foundation. This tool shall be made available to all map holdings in archives, libraries, university departments and museums in Germany as a comfortable means for the administration of map holdings and as a search tool. Sheets belonging to map series as well as single maps (old and new will be registered cooperatively by the participants with simple tools. This cooperation in data maintenance will facilitate the work especially for understaffed map holdings. Depending on the type of map there are four different mechanisms for map reference. For map series electronic index sheets are used which will show information regarding the various issues of the map sheets. Due to the intuitive graphic search entry GOKaRT-users will easily find the required maps of a certain region available in a chosen holding. User administration modules ensure comfortable handling. GOKaRT is being developed on the basis of licence-free open source programmes. In case financing is provided by the German Research Foundation, GOKaRT can be used free of charge internationally. This would require a contract stipulating data exchange between the partners as well as permanent storage and usability of the data.

The Virtual UNICOS Process Expert: integration of Artificial Intelligence tools in Control Systems

CERN Multimedia

Vilches Calvo, I; Barillere, R

2009-01-01

UNICOS is a CERN framework to produce control applications. It provides operators with ways to interact with all process items from the most simple (e.g. I/O channels) to the most abstract objects (e.g. a part of the plant). This possibility of fine grain operation is particularly useful to recover from abnormal situations if operators have the required knowledge. The Virtual UNICOS Process Expert project aims at providing operators with means to handle difficult operation cases for which the intervention of process experts is usually requested. The main idea of project is to use the openness of the UNICOS-based applications to integrate tools (e.g. Artificial Intelligence tools) which will act as Process Experts to analyze complex situations, to propose and to execute smooth recovery procedures.

Quantitative Evaluation of Heavy Duty Machine Tools Remanufacturing Based on Modified Catastrophe Progression Method

Science.gov (United States)

shunhe, Li; jianhua, Rao; lin, Gui; weimin, Zhang; degang, Liu

2017-11-01

The result of remanufacturing evaluation is the basis for judging whether the heavy duty machine tool can remanufacture in the EOL stage of the machine tool lifecycle management.The objectivity and accuracy of evaluation is the key to the evaluation method.In this paper, the catastrophe progression method is introduced into the quantitative evaluation of heavy duty machine tools’ remanufacturing,and the results are modified by the comprehensive adjustment method,which makes the evaluation results accord with the standard of human conventional thinking.Using the catastrophe progression method to establish the heavy duty machine tools’ quantitative evaluation model,to evaluate the retired TK6916 type CNC floor milling-boring machine’s remanufacturing.The evaluation process is simple,high quantification,the result is objective.

Healthy habits: efficacy of simple advice on weight control based on a habit-formation model.

Science.gov (United States)

Lally, P; Chipperfield, A; Wardle, J

2008-04-01

To evaluate the efficacy of a simple weight loss intervention, based on principles of habit formation. An exploratory trial in which overweight and obese adults were randomized either to a habit-based intervention condition (with two subgroups given weekly vs monthly weighing; n=33, n=36) or to a waiting-list control condition (n=35) over 8 weeks. Intervention participants were followed up for 8 months. A total of 104 adults (35 men, 69 women) with an average BMI of 30.9 kg m(-2). Intervention participants were given a leaflet containing advice on habit formation and simple recommendations for eating and activity behaviours promoting negative energy balance, together with a self-monitoring checklist. Weight change over 8 weeks in the intervention condition compared with the control condition and weight loss maintenance over 32 weeks in the intervention condition. At 8 weeks, people in the intervention condition had lost significantly more weight (mean=2.0 kg) than those in the control condition (0.4 kg), with no difference between weekly and monthly weighing subgroups. At 32 weeks, those who remained in the study had lost an average of 3.8 kg, with 54% losing 5% or more of their body weight. An intention-to-treat analysis (based on last-observation-carried-forward) reduced this to 2.6 kg, with 26% achieving a 5% weight loss. This easily disseminable, low-cost, simple intervention produced clinically significant weight loss. In limited resource settings it has potential as a tool for obesity management.

The Fluid Foil: The Seventh Simple Machine

Science.gov (United States)

Mitts, Charles R.

2012-01-01

A simple machine does one of two things: create a mechanical advantage (lever) or change the direction of an applied force (pulley). Fluid foils are unique among simple machines because they not only change the direction of an applied force (wheel and axle); they convert fluid energy into mechanical energy (wind and Kaplan turbines) or vice versa,…

A Simple Spatial Working Memory and Attention Test on Paired Symbols Shows Developmental Deficits in Schizophrenia Patients

Directory of Open Access Journals (Sweden)

Wei Song

2013-01-01

Full Text Available People with neuropsychiatric disorders such as schizophrenia often display deficits in spatial working memory and attention. Evaluating working memory and attention in schizophrenia patients is usually based on traditional tasks and the interviewer’s judgment. We developed a simple Spatial Working Memory and Attention Test on Paired Symbols (SWAPS. It takes only several minutes to complete, comprising 101 trials for each subject. In this study, we tested 72 schizophrenia patients and 188 healthy volunteers in China. In a healthy control group with ages ranging from 12 to 60, the efficiency score (accuracy divided by reaction time reached a peak in the 20–27 age range and then declined with increasing age. Importantly, schizophrenia patients failed to display this developmental trend in the same age range and adults had significant deficits compared to the control group. Our data suggests that this simple Spatial Working Memory and Attention Test on Paired Symbols can be a useful tool for studies of spatial working memory and attention in neuropsychiatric disorders.

simple sequence repeat (SSR)

African Journals Online (AJOL)

In the present study, 78 mapped simple sequence repeat (SSR) markers representing 11 linkage groups of adzuki bean were evaluated for transferability to mungbean and related Vigna spp. 41 markers amplified characteristic bands in at least one Vigna species. The transferability percentage across the genotypes ranged ...

The skeletons in our closet: E-learning tools and what happens when one side does not fit all.

Science.gov (United States)

Van Nuland, Sonya E; Rogers, Kem A

2017-11-01

In the anatomical sciences, e-learning tools have become a critical component of teaching anatomy when physical space and cadaveric resources are limited. However, studies that use empirical evidence to compare their efficacy to visual-kinesthetic learning modalities are scarce. The study examined how a visual-kinesthetic experience, involving a physical skeleton, impacts learning when compared with virtual manipulation of a simple two-dimensional (2D) e-learning tool, A.D.A.M. Interactive Anatomy. Students from The University of Western Ontario, Canada (n = 77) participated in a dual-task study to: (1) investigate if a dual-task paradigm is an effective tool for measuring cognitive load across these different learning modalities; and (2) to assess the impact of knowledge recall and spatial ability when using them. Students were assessed using knowledge scores, Stroop task reaction times, and mental rotation test scores. Results demonstrated that the dual-task paradigm was not an effective tool for measuring cognitive load across different learning modalities with respect to kinesthetic learning. However, our study highlighted that handing physical specimens yielded major, positive impacts on performance that a simple commercial e-learning tool failed to deliver (P < 0.001). Furthermore, students with low spatial ability were significantly disadvantaged when they studied the bony joint and were tested on contralateral images (P = 0.046, R = 0.326). This suggests that, despite limbs being mirror images, students should be taught the anatomy of, as well as procedures on, both sides of the human body, enhancing the ability of all students, regardless of spatial ability, to take anatomical knowledge into the clinic and perform successfully. Anat Sci Educ 10: 570-588. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

Comparison of discrete event simulation tools in an academic environment

Directory of Open Access Journals (Sweden)

Mario Jadrić

2014-12-01

Full Text Available A new research model for simulation software evaluation is proposed consisting of three main categories of criteria: modeling and simulation capabilities of the explored tools, and tools’ input/output analysis possibilities, all with respective sub-criteria. Using the presented model, two discrete event simulation tools are evaluated in detail using the task-centred scenario. Both tools (Arena and ExtendSim were used for teaching discrete event simulation in preceding academic years. With the aim to inspect their effectiveness and to help us determine which tool is more suitable for students i.e. academic purposes, we used a simple simulation model of entities competing for limited resources. The main goal was to measure subjective (primarily attitude and objective indicators while using the tools when the same simulation scenario is given. The subjects were first year students of Master studies in Information Management at the Faculty of Economics in Split taking a course in Business Process Simulations (BPS. In a controlled environment – in a computer lab, two groups of students were given detailed, step-by-step instructions for building models using both tools - first using ExtendSim then Arena or vice versa. Subjective indicators (students’ attitudes were collected using an online survey completed immediately upon building each model. Subjective indicators primarily include students’ personal estimations of Arena and ExtendSim capabilities/features for model building, model simulation and result analysis. Objective indicators were measured using specialised software that logs information on user's behavior while performing a particular task on their computer such as distance crossed by mouse during model building, the number of mouse clicks, usage of the mouse wheel and speed achieved. The results indicate that ExtendSim is well preferred comparing to Arena with regards to subjective indicators while the objective indicators are

Quantitative Systems Pharmacology: A Case for Disease Models.

Science.gov (United States)

Musante, C J; Ramanujan, S; Schmidt, B J; Ghobrial, O G; Lu, J; Heatherington, A C

2017-01-01

Quantitative systems pharmacology (QSP) has emerged as an innovative approach in model-informed drug discovery and development, supporting program decisions from exploratory research through late-stage clinical trials. In this commentary, we discuss the unique value of disease-scale "platform" QSP models that are amenable to reuse and repurposing to support diverse clinical decisions in ways distinct from other pharmacometrics strategies. © 2016 The Authors Clinical Pharmacology & Therapeutics published by Wiley Periodicals, Inc. on behalf of The American Society for Clinical Pharmacology and Therapeutics.

Innovative Instructional Tools from the AMS

Science.gov (United States)

Abshire, W. E.; Geer, I. W.; Mills, E. W.; Nugnes, K. A.; Stimach, A. E.

2016-12-01

Since 1996, the American Meteorological Society (AMS) has been developing online educational materials with dynamic features that engage students and encourage additional exploration of various concepts. Most recently, AMS transitioned its etextbooks to webBooks. Now accessible anywhere with internet access, webBooks can be read with any web browser. Prior versions of AMS etextbooks were difficult to use in a lab setting, however webBooks are much easier to use and no longer a hurdle to learning. Additionally, AMS eInvestigations Manuals, also in webBook format, include labs with innovative features and educational tools. One such example is the AMS Climate at a Glance (CAG) app that draws data from NOAA's Climate at a Glance website. The user selects historical data of a given parameter and the app calculates various statistics revealing whether or not the results are consistent with climate change. These results allow users to distinguish between climate variability and climate change. This can be done for hundreds of locations across the U.S. and on multiple time scales. Another innovative educational tool used in AMS eInvestigations Manuals is the AMS Conceptual Climate Energy Model (CCEM). The CCEM is a computer simulation designed to enable users to track the paths that units of energy might follow as they enter, move through and exit an imaginary system according to simple rules applied to different scenarios. The purpose is to provide insight into the impacts of physical processes that operate in the real world. Finally, AMS educational materials take advantage of Google Earth imagery to reproduce the physical aspects of globes, allowing users to investigate spatial relationships in three dimensions. Google Earth imagery is used to explore tides, ocean bottom bathymetry and El Nino and La Nina. AMS will continue to develop innovative educational materials and tools as technology advances, to attract more students to the Earth sciences.

Performance of the Osteoporosis Self-Assessment Tool in ruling out low bone mineral density in postmenopausal women: a systematic review

DEFF Research Database (Denmark)

Rud, B; Hilden, J; Hyldstrup, L

2007-01-01

SUMMARY: The Osteoporosis Self-Assessment Tool (OST) is a simple test that may be of clinical value to rule-out low bone mineral density. We performed a systematic review to assess its performance in postmenopausal women. We included 36 studies. OST performed moderately in ruling-out femoral neck T...

Performance of the osteoporosis self-assessment tool in ruling out low bone mineral density in postmenopausal women: A systematic review

DEFF Research Database (Denmark)

Rud, B.; Hilden, Jørgen; Hyldstrup, L.

2007-01-01

SUMMARY: The Osteoporosis Self-Assessment Tool (OST) is a simple test that may be of clinical value to rule-out low bone mineral density. We performed a systematic review to assess its performance in postmenopausal women. We included 36 studies. OST performed moderately in ruling-out femoral neck T...

CoC GIS Tools (GIS Tool)

Data.gov (United States)

Department of Housing and Urban Development — This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through...

jSPyDB, an open source database-independent tool for data management

Science.gov (United States)

Pierro, Giuseppe Antonio; Cavallari, Francesca; Di Guida, Salvatore; Innocente, Vincenzo

2011-12-01

Nowadays, the number of commercial tools available for accessing Databases, built on Java or .Net, is increasing. However, many of these applications have several drawbacks: usually they are not open-source, they provide interfaces only with a specific kind of database, they are platform-dependent and very CPU and memory consuming. jSPyDB is a free web-based tool written using Python and Javascript. It relies on jQuery and python libraries, and is intended to provide a simple handler to different database technologies inside a local web browser. Such a tool, exploiting fast access libraries such as SQLAlchemy, is easy to install, and to configure. The design of this tool envisages three layers. The front-end client side in the local web browser communicates with a backend server. Only the server is able to connect to the different databases for the purposes of performing data definition and manipulation. The server makes the data available to the client, so that the user can display and handle them safely. Moreover, thanks to jQuery libraries, this tool supports export of data in different formats, such as XML and JSON. Finally, by using a set of pre-defined functions, users are allowed to create their customized views for a better data visualization. In this way, we optimize the performance of database servers by avoiding short connections and concurrent sessions. In addition, security is enforced since we do not provide users the possibility to directly execute any SQL statement.

jSPyDB, an open source database-independent tool for data management

International Nuclear Information System (INIS)

Pierro, Giuseppe Antonio; Cavallari, Francesca; Di Guida, Salvatore; Innocente, Vincenzo

2011-01-01

Nowadays, the number of commercial tools available for accessing Databases, built on Java or .Net, is increasing. However, many of these applications have several drawbacks: usually they are not open-source, they provide interfaces only with a specific kind of database, they are platform-dependent and very CPU and memory consuming. jSPyDB is a free web-based tool written using Python and Javascript. It relies on jQuery and python libraries, and is intended to provide a simple handler to different database technologies inside a local web browser. Such a tool, exploiting fast access libraries such as SQLAlchemy, is easy to install, and to configure. The design of this tool envisages three layers. The front-end client side in the local web browser communicates with a backend server. Only the server is able to connect to the different databases for the purposes of performing data definition and manipulation. The server makes the data available to the client, so that the user can display and handle them safely. Moreover, thanks to jQuery libraries, this tool supports export of data in different formats, such as XML and JSON. Finally, by using a set of pre-defined functions, users are allowed to create their customized views for a better data visualization. In this way, we optimize the performance of database servers by avoiding short connections and concurrent sessions. In addition, security is enforced since we do not provide users the possibility to directly execute any SQL statement.

Modeling and Controlling Flow Transient in Pipeline Systems: Applied for Reservoir and Pump Systems Combined with Simple Surge Tank

Directory of Open Access Journals (Sweden)

Itissam ABUIZIAH

2014-03-01

Full Text Available When transient conditions (water hammer exist, the life expectancy of the system can be adversely impacted, resulting in pump and valve failures and catastrophic pipe rupture. Hence, transient control has become an essential requirement for ensuring safe operation of water pipeline systems. To protect the pipeline systems from transient effects, an accurate analysis and suitable protection devices should be used. This paper presents the problem of modeling and simulation of transient phenomena in hydraulic systems based on the characteristics method. Also, it provides the influence of using the protection devices to control the adverse effects due to excessive and low pressure occuring in the transient. We applied this model for two main pipeline systems: Valve and pump combined with a simple surge tank connected to reservoir. The results obtained by using this model indicate that the model is an efficient tool for water hammer analysis. Moreover, using a simple surge tank reduces the unfavorable effects of transients by reducing pressure fluctuations.

Building a Natural Language Processing Tool to Identify Patients With High Clinical Suspicion for Kawasaki Disease from Emergency Department Notes.

Science.gov (United States)

Doan, Son; Maehara, Cleo K; Chaparro, Juan D; Lu, Sisi; Liu, Ruiling; Graham, Amanda; Berry, Erika; Hsu, Chun-Nan; Kanegaye, John T; Lloyd, David D; Ohno-Machado, Lucila; Burns, Jane C; Tremoulet, Adriana H

2016-05-01

Delayed diagnosis of Kawasaki disease (KD) may lead to serious cardiac complications. We sought to create and test the performance of a natural language processing (NLP) tool, the KD-NLP, in the identification of emergency department (ED) patients for whom the diagnosis of KD should be considered. We developed an NLP tool that recognizes the KD diagnostic criteria based on standard clinical terms and medical word usage using 22 pediatric ED notes augmented by Unified Medical Language System vocabulary. With high suspicion for KD defined as fever and three or more KD clinical signs, KD-NLP was applied to 253 ED notes from children ultimately diagnosed with either KD or another febrile illness. We evaluated KD-NLP performance against ED notes manually reviewed by clinicians and compared the results to a simple keyword search. KD-NLP identified high-suspicion patients with a sensitivity of 93.6% and specificity of 77.5% compared to notes manually reviewed by clinicians. The tool outperformed a simple keyword search (sensitivity = 41.0%; specificity = 76.3%). KD-NLP showed comparable performance to clinician manual chart review for identification of pediatric ED patients with a high suspicion for KD. This tool could be incorporated into the ED electronic health record system to alert providers to consider the diagnosis of KD. KD-NLP could serve as a model for decision support for other conditions in the ED. © 2016 by the Society for Academic Emergency Medicine.

Infinitivo simple y compuesto con predicados declarativos

OpenAIRE

Rodríguez Espiñeira, María José

2012-01-01

Este trabajo se centra en las diferencias semánticas y sintácticas que presentan las construcciones de infinitivo simple y compuesto que actúan como objeto directo de predicados declarativos. El tema despierta interés por varios motivos: (1) Se trata de un subconjunto de verbos que subordinan infinitivos simples de un elenco restringido, pero que admiten regularmente infinitivos compuestos.

A Novel Real-Time Data Acquisition Using an Excel Spreadsheet in Pendulum Experiment Tool with Light-Based Timer

Science.gov (United States)

Adhitama, Egy; Fauzi, Ahmad

2018-01-01

In this study, a pendulum experimental tool with a light-based timer has been developed to measure the period of a simple pendulum. The obtained data was automatically recorded in an Excel spreadsheet. The intensity of monochromatic light, sensed by a 3DU5C phototransistor, dynamically changes as the pendulum swings. The changed intensity varies…

Let's Stop Trying to Quantify Household Vulnerability: The Problem With Simple Scales for Targeting and Evaluating Economic Strengthening Programs.

Science.gov (United States)

Moret, Whitney M

2018-03-21

Economic strengthening practitioners are increasingly seeking data collection tools that will help them target households vulnerable to HIV and poor child well-being outcomes, match households to appropriate interventions, monitor their status, and determine readiness for graduation from project support. This article discusses efforts in 3 countries to develop simple, valid tools to quantify and classify economic vulnerability status. In Côte d'Ivoire, we conducted a cross-sectional survey with 3,749 households to develop a scale based on the definition of HIV-related economic vulnerability from the U.S. President's Emergency Plan for AIDS Relief (PEPFAR) for the purpose of targeting vulnerable households for PEPFAR-funded programs for orphans and vulnerable children. The vulnerability measures examined did not cluster in ways that would allow for the creation of a small number of composite measures, and thus we were unable to develop a scale. In Uganda, we assessed the validity of a vulnerability index developed to classify households according to donor classifications of economic status by measuring its association with a validated poverty measure, finding only a modest correlation. In South Africa, we developed monitoring and evaluation tools to assess economic status of individual adolescent girls and their households. We found no significant correlation with our validation measures, which included a validated measure of girls' vulnerability to HIV, a validated poverty measure, and subjective classifications generated by the community, data collector, and respondent. Overall, none of the measures of economic vulnerability used in the 3 countries varied significantly with their proposed validation items. Our findings suggest that broad constructs of economic vulnerability cannot be readily captured using simple scales to classify households and individuals in a way that accounts for a substantial amount of variance at locally defined vulnerability levels. We

Extraction Analysis and Creation of Three-Dimensional Road Profiles Using Matlab OpenCRG Tool

Directory of Open Access Journals (Sweden)

Rakesh Hari Borse

2015-08-01

Full Text Available In vehicle systems dynamics there are wide applications of simulation of vehicles on road surfaces. These simulation applications are related to vehicle handling ride comfort and durability. For accurate prediction of results there is a need for a reliable and efficient road representations. The efficient representation of road surface profiles is to represent them in three-dimensional space. This is made possible by the CRG Curved Regular Grid approach. OpenCRG is a completely open source project including a tool suite for the creation modification and evaluation of road surfaces. Its objective is to standardized detailed road surface description and it may be used for applications like tire models vibrations or driving simulation. The Matlab tool suite of OpenCRG provides powerful modification or creation tools and allows to visualize the 3D road data representation. The current research focuses on basic concepts of OpenCRG and its Matlab environment. The extraction of longitudinal two-dimensional road profiles from three-dimensional CRG format is researched. The creation of simple virtual three-dimensional roads has been programmed. A Matlab software tool to extract create and analyze the three-dimensional road profiles is to be developed.

Building Automatic Grading Tools for Basic of Programming Lab in an Academic Institution

Science.gov (United States)

Harimurti, Rina; Iwan Nurhidayat, Andi; Asmunin

2018-04-01

The skills of computer programming is a core competency that must be mastered by students majoring in computer sciences. The best way to improve this skill is through the practice of writing many programs to solve various problems from simple to complex. It takes hard work and a long time to check and evaluate the results of student labs one by one, especially if the number of students a lot. Based on these constrain, web proposes Automatic Grading Tools (AGT), the application that can evaluate and deeply check the source code in C, C++. The application architecture consists of students, web-based applications, compilers, and operating systems. Automatic Grading Tools (AGT) is implemented MVC Architecture and using open source software, such as laravel framework version 5.4, PostgreSQL 9.6, Bootstrap 3.3.7, and jquery library. Automatic Grading Tools has also been tested for real problems by submitting source code in C/C++ language and then compiling. The test results show that the AGT application has been running well.

Strong Bisimilarity of Simple Process Algebras

DEFF Research Database (Denmark)

Srba, Jirí

2003-01-01

We study bisimilarity and regularity problems of simple process algebras. In particular, we show PSPACE-hardness of the following problems: (i) strong bisimilarity of Basic Parallel Processes (BPP), (ii) strong bisimilarity of Basic Process Algebra (BPA), (iii) strong regularity of BPP, and (iv......) strong regularity of BPA. We also demonstrate NL-hardness of strong regularity problems for the normed subclasses of BPP and BPA. Bisimilarity problems of simple process algebras are introduced in a general framework of process rewrite systems, and a uniform description of the new techniques used...

Molecular implementation of simple logic programs.

Science.gov (United States)

Ran, Tom; Kaplan, Shai; Shapiro, Ehud

2009-10-01

Autonomous programmable computing devices made of biomolecules could interact with a biological environment and be used in future biological and medical applications. Biomolecular implementations of finite automata and logic gates have already been developed. Here, we report an autonomous programmable molecular system based on the manipulation of DNA strands that is capable of performing simple logical deductions. Using molecular representations of facts such as Man(Socrates) and rules such as Mortal(X) logical deductions and delivers the result. This prototype is the first simple programming language with a molecular-scale implementation.

NIHSeniorHealth: a free tool for online health information for older adults.

Science.gov (United States)

Linares, Brenda M

2013-01-01

NIHSeniorHealth is a free, consumer health website that covers health topics affecting older adults. The website was created and is maintained by the National Library of Medicine (NLM) and features more than 55 health topics and nearly 150 videos. The easy-to-use navigational and visual tools create a user-friendly experience for older adults, their families, and caregivers who seek senior-specific information on the web. This column will include an overview of the website, a simple search, and a review of the features of NIHSeniorHealth.

Simple spherical ablative-implosion model

International Nuclear Information System (INIS)

Mayer, F.J.; Steele, J.T.; Larsen, J.T.

1980-01-01

A simple model of the ablative implosion of a high-aspect-ratio (shell radius to shell thickness ratio) spherical shell is described. The model is similar in spirit to Rosenbluth's snowplow model. The scaling of the implosion time was determined in terms of the ablation pressure and the shell parameters such as diameter, wall thickness, and shell density, and compared these to complete hydrodynamic code calculations. The energy transfer efficiency from ablation pressure to shell implosion kinetic energy was examined and found to be very efficient. It may be possible to attach a simple heat-transport calculation to our implosion model to describe the laser-driven ablation-implosion process. The model may be useful for determining other energy driven (e.g., ion beam) implosion scaling

A Simple Hydrogen Electrode

Science.gov (United States)

Eggen, Per-Odd

2009-01-01

This article describes the construction of an inexpensive, robust, and simple hydrogen electrode, as well as the use of this electrode to measure "standard" potentials. In the experiment described here the students can measure the reduction potentials of metal-metal ion pairs directly, without using a secondary reference electrode. Measurements…

SSL - THE SIMPLE SOCKETS LIBRARY

Science.gov (United States)

Campbell, C. E.

1994-01-01

The Simple Sockets Library (SSL) allows C programmers to develop systems of cooperating programs using Berkeley streaming Sockets running under the TCP/IP protocol over Ethernet. The SSL provides a simple way to move information between programs running on the same or different machines and does so with little overhead. The SSL can create three types of Sockets: namely a server, a client, and an accept Socket. The SSL's Sockets are designed to be used in a fashion reminiscent of the use of FILE pointers so that a C programmer who is familiar with reading and writing files will immediately feel comfortable with reading and writing with Sockets. The SSL consists of three parts: the library, PortMaster, and utilities. The user of the SSL accesses it by linking programs to the SSL library. The PortMaster initializes connections between clients and servers. The PortMaster also supports a "firewall" facility to keep out socket requests from unapproved machines. The "firewall" is a file which contains Internet addresses for all approved machines. There are three utilities provided with the SSL. SKTDBG can be used to debug programs that make use of the SSL. SPMTABLE lists the servers and port numbers on requested machine(s). SRMSRVR tells the PortMaster to forcibly remove a server name from its list. The package also includes two example programs: multiskt.c, which makes multiple accepts on one server, and sktpoll.c, which repeatedly attempts to connect a client to some server at one second intervals. SSL is a machine independent library written in the C-language for computers connected via Ethernet using the TCP/IP protocol. It has been successfully compiled and implemented on a variety of platforms, including Sun series computers running SunOS, DEC VAX series computers running VMS, SGI computers running IRIX, DECstations running ULTRIX, DEC alpha AXPs running OSF/1, IBM RS/6000 computers running AIX, IBM PC and compatibles running BSD/386 UNIX and HP Apollo 3000

Tool post modification allows easy turret lathe cutting-tool alignment

Science.gov (United States)

Fouts, L.

1966-01-01

Modified tool holder and tool post permit alignment of turret lathe cutting tools on the center of the spindle. The tool is aligned with the spindle by the holder which is kept in position by a hydraulic lock in feature of the tool post. The tool post is used on horizontal and vertical turret lathes and other engine lathes.

Simple Solutions for Dry Eye

Science.gov (United States)

Patient Education Sheet Simple Solutions for Dry Eye The SSF thanks J. Daniel Nelson, MD, Associate Medical Director, Specialty Care HealthPartners Medical Group & Clinics, and Professor of Ophthalmology, University of ...

Simple analytical relations for ship bow waves

Science.gov (United States)

Noblesse, Francis; Delhommeau, G.?Rard; Guilbaud, Michel; Hendrix, Dane; Yang, Chi

Simple analytical relations for the bow wave generated by a ship in steady motion are given. Specifically, simple expressions that define the height of a ship bow wave, the distance between the ship stem and the crest of the bow wave, the rise of water at the stem, and the bow wave profile, explicitly and without calculations, in terms of the ship speed, draught, and waterline entrance angle, are given. Another result is a simple criterion that predicts, also directly and without calculations, when a ship in steady motion cannot generate a steady bow wave. This unsteady-flow criterion predicts that a ship with a sufficiently fine waterline, specifically with waterline entrance angle 2, may generate a steady bow wave at any speed. However, a ship with a fuller waterline (25E) can only generate a steady bow wave if the ship speed is higher than a critical speed, defined in terms of αE by a simple relation. No alternative criterion for predicting when a ship in steady motion does not generate a steady bow wave appears to exist. A simple expression for the height of an unsteady ship bow wave is also given. In spite of their remarkable simplicity, the relations for ship bow waves obtained in the study (using only rudimentary physical and mathematical considerations) are consistent with experimental measurements for a number of hull forms having non-bulbous wedge-shaped bows with small flare angle, and with the authors' measurements and observations for a rectangular flat plate towed at a yaw angle.

Substoichiometric method in the simple radiometric analysis

International Nuclear Information System (INIS)

Ikeda, N.; Noguchi, K.

1979-01-01

The substoichiometric method is applied to simple radiometric analysis. Two methods - the standard reagent method and the standard sample method - are proposed. The validity of the principle of the methods is verified experimentally in the determination of silver by the precipitation method, or of zinc by the ion-exchange or solvent-extraction method. The proposed methods are simple and rapid compared with the conventional superstoichiometric method. (author)

Development of nonlinear acoustic propagation analysis tool toward realization of loud noise environment prediction in aeronautics

Energy Technology Data Exchange (ETDEWEB)

Kanamori, Masashi, E-mail: kanamori.masashi@jaxa.jp; Takahashi, Takashi, E-mail: takahashi.takashi@jaxa.jp; Aoyama, Takashi, E-mail: aoyama.takashi@jaxa.jp [Japan Aerospace Exploration Agency, 7-44-1, Jindaijihigashi-machi, Chofu, Tokyo (Japan)

2015-10-28

Shown in this paper is an introduction of a prediction tool for the propagation of loud noise with the application to the aeronautics in mind. The tool, named SPnoise, is based on HOWARD approach, which can express almost exact multidimensionality of the diffraction effect at the cost of back scattering. This paper argues, in particular, the prediction of the effect of atmospheric turbulence on sonic boom as one of the important issues in aeronautics. Thanks to the simple and efficient modeling of the atmospheric turbulence, SPnoise successfully re-creates the feature of the effect, which often emerges in the region just behind the front and rear shock waves in the sonic boom signature.

A simple Chelex protocol for DNA extraction from Anopheles spp.

Science.gov (United States)

Musapa, Mulenga; Kumwenda, Taida; Mkulama, Mtawa; Chishimba, Sandra; Norris, Douglas E; Thuma, Philip E; Mharakurwa, Sungano

2013-01-09

Endemic countries are increasingly adopting molecular tools for efficient typing, identification and surveillance against malaria parasites and vector mosquitoes, as an integral part of their control programs. For sustainable establishment of these accurate approaches in operations research to strengthen malaria control and elimination efforts, simple and affordable methods, with parsimonious reagent and equipment requirements are essential. Here we present a simple Chelex-based technique for extracting malaria parasite and vector DNA from field collected mosquito specimens. We morphologically identified 72 Anopheles gambiae sl. from 156 mosquitoes captured by pyrethrum spray catches in sleeping rooms of households within a 2,000 km(2) vicinity of the Malaria Institute at Macha. After dissection to separate the head and thorax from the abdomen for all 72 Anopheles gambiae sl. mosquitoes, the two sections were individually placed in 1.5 ml microcentrifuge tubes and submerged in 20 μl of deionized water. Using a sterile pipette tip, each mosquito section was separately homogenized to a uniform suspension in the deionized water. Of the ensuing homogenate from each mosquito section, 10 μl was retained while the other 10 μl was transferred to a separate autoclaved 1.5 ml tube. The separate aliquots were subjected to DNA extraction by either the simplified Chelex or the standard salting out extraction protocol(9,10). The salting out protocol is so-called and widely used because it employs high salt concentrations in lieu of hazardous organic solvents (such as phenol and chloroform) for the protein precipitation step during DNA extraction(9). Extracts were used as templates for PCR amplification using primers targeting arthropod mitochondrial nicotinamide adenine dinucleotide dehydrogenase (NADH) subunit 4 gene (ND4) to check DNA quality, a PCR for identification of Anopheles gambiae sibling species(10) and a nested PCR for typing of Plasmodium falciparum infection

SCRAED - Simple and Complex Random Assignment in Experimental Designs

OpenAIRE

Alferes, Valentim R.

2009-01-01

SCRAED is a package of 37 self-contained SPSS syntax files that performs simple and complex random assignment in experimental designs. For between-subjects designs, SCRAED includes simple random assignment (no restrictions, forced equal sizes, forced unequal sizes, and unequal probabilities), block random assignment (simple and generalized blocks), and stratified random assignment (no restrictions, forced equal sizes, forced unequal sizes, and unequal probabilities). For within-subject...