Synthesis and characterization of micrometer Cu/PVP architectures

International Nuclear Information System (INIS)

Luo, Huajuan; Zhao, Yanbao; Sun, Lei

2011-01-01

Graphical abstract: A simple method for the synthesis of novel micrometer flower-like Cu/PVP architectures was introduced. Highlights: → Micrometer flower-like copper/polyvinylpyrrolidone architectures were obtained by a simple chemical route. → The amount of N 2 H 4 ·H 2 O, the reaction temperature, the molar ratio of CuCl 2 to PVP and different molecular weights of PVP play an important role in the controlling the morphology of the Cu/PVP architectures. → A possible mechanism of the formation of Cu/PVP architectures was discussed. -- Abstract: Micrometer-sized flower-like Cu/polyvinylpyrrolidone (PVP) architectures are synthesized by the reduction of copper (II) salt with hydrazine hydrate in aqueous solution in the presence of PVP capping agent. The resulting Cu/PVP architectures are investigated by UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). The Cu/PVP flowers have uniform morphologies with an average diameter of 10 μm, made of several intercrossing plates. The formation of Cu/PVP flowers is a new kinetic control process, and the factors such as the amount of N 2 H 4 ·H 2 O, reaction temperature, molar ratio of CuCl 2 to PVP and molecular weight of PVP have significant effect on the morphology of Cu/PVP architectures. A possible mechanism of the formation of micrometer Cu/PVP architectures was discussed.

Storage system architectures and their characteristics

Science.gov (United States)

Sarandrea, Bryan M.

1993-01-01

Not all users storage requirements call for 20 MBS data transfer rates, multi-tier file or data migration schemes, or even automated retrieval of data. The number of available storage solutions reflects the broad range of user requirements. It is foolish to think that any one solution can address the complete range of requirements. For users with simple off-line storage requirements, the cost and complexity of high end solutions would provide no advantage over a more simple solution. The correct answer is to match the requirements of a particular storage need to the various attributes of the available solutions. The goal of this paper is to introduce basic concepts of archiving and storage management in combination with the most common architectures and to provide some insight into how these concepts and architectures address various storage problems. The intent is to provide potential consumers of storage technology with a framework within which to begin the hunt for a solution which meets their particular needs. This paper is not intended to be an exhaustive study or to address all possible solutions or new technologies, but is intended to be a more practical treatment of todays storage system alternatives. Since most commercial storage systems today are built on Open Systems concepts, the majority of these solutions are hosted on the UNIX operating system. For this reason, some of the architectural issues discussed focus around specific UNIX architectural concepts. However, most of the architectures are operating system independent and the conclusions are applicable to such architectures on any operating system.

A simple security architecture for smart water management system

CSIR Research Space (South Africa)

Ntuli, N

2016-05-01

Full Text Available . Secure booting prevents installation of malicious code onto the device. By making sure that the booting process is secured, we can establish securely the root of trust for the device. Public key cryptography is utilized at this stage. During... Architecture 1168 Nonhlanhla Ntuli and Adnan Abu-Mahfouz / Procedia Computer Science 83 ( 2016 ) 1164 – 1169 3.2. Secure Communication While public key cryptography can be used in the first step (secure booting), it would be too heavy to use during...

METRIC context unit architecture

Energy Technology Data Exchange (ETDEWEB)

Simpson, R.O.

1988-01-01

METRIC is an architecture for a simple but powerful Reduced Instruction Set Computer (RISC). Its speed comes from the simultaneous processing of several instruction streams, with instructions from the various streams being dispatched into METRIC's execution pipeline as they become available for execution. The pipeline is thus kept full, with a mix of instructions for several contexts in execution at the same time. True parallel programming is supported within a single execution unit, the METRIC Context Unit. METRIC's architecture provides for expansion through the addition of multiple Context Units and of specialized Functional Units. The architecture thus spans a range of size and performance from a single-chip microcomputer up through large and powerful multiprocessors. This research concentrates on the specification of the METRIC Context Unit at the architectural level. Performance tradeoffs made during METRIC's design are discussed, and projections of METRIC's performance are made based on simulation studies.

Architectural fragments

DEFF Research Database (Denmark)

Bang, Jacob Sebastian

2018-01-01

I have created a large collection of plaster models: a collection of Obstructions, errors and opportunities that may develop into architecture. The models are fragments of different complex shapes as well as more simple circular models with different profiling and diameters. In this contect I have....... I try to invent the ways of drawing the models - that decode and unfold them into architectural fragments- into future buildings or constructions in the landscape. [1] Luigi Moretti: Italian architect, 1907 - 1973 [2] Man Ray: American artist, 1890 - 1976. in 2015, I saw the wonderful exhibition...... "Man Ray - Human Equations" at the Glyptotek in Copenhagen, organized by the Philips Collection in Washington D.C. and the Israel Museum in Jerusalem (in 2013). See also: "Man Ray - Human Equations" catalogue published by Hatje Cantz Verlag, Germany, 2014....

Using a cognitive architecture for general purpose service robot control

Science.gov (United States)

Puigbo, Jordi-Ysard; Pumarola, Albert; Angulo, Cecilio; Tellez, Ricardo

2015-04-01

A humanoid service robot equipped with a set of simple action skills including navigating, grasping, recognising objects or people, among others, is considered in this paper. By using those skills the robot should complete a voice command expressed in natural language encoding a complex task (defined as the concatenation of a number of those basic skills). As a main feature, no traditional planner has been used to decide skills to be activated, as well as in which sequence. Instead, the SOAR cognitive architecture acts as the reasoner by selecting which action the robot should complete, addressing it towards the goal. Our proposal allows to include new goals for the robot just by adding new skills (without the need to encode new plans). The proposed architecture has been tested on a human-sized humanoid robot, REEM, acting as a general purpose service robot.

Architectural freedom and industrialised architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

Architectural freedom and industrialized architecture. Inge Vestergaard, Associate Professor, Cand. Arch. Aarhus School of Architecture, Denmark Noerreport 20, 8000 Aarhus C Telephone +45 89 36 0000 E-mai l inge.vestergaard@aarch.dk Based on the repetitive architecture from the "building boom" 1960...... customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performed expression in direct relation to the given context. Through the last couple of years we have in Denmark been focusing a more sustainable and low energy building technique, which also include...... to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...

Architecture & Environment

Science.gov (United States)

Erickson, Mary; Delahunt, Michael

2010-01-01

Most art teachers would agree that architecture is an important form of visual art, but they do not always include it in their curriculums. In this article, the authors share core ideas from "Architecture and Environment," a teaching resource that they developed out of a long-term interest in teaching architecture and their fascination with the…

A software architecture for adaptive modular sensing systems.

Science.gov (United States)

Lyle, Andrew C; Naish, Michael D

2010-01-01

By combining a number of simple transducer modules, an arbitrarily complex sensing system may be produced to accommodate a wide range of applications. This work outlines a novel software architecture and knowledge representation scheme that has been developed to support this type of flexible and reconfigurable modular sensing system. Template algorithms are used to embed intelligence within each module. As modules are added or removed, the composite sensor is able to automatically determine its overall geometry and assume an appropriate collective identity. A virtual machine-based middleware layer runs on top of a real-time operating system with a pre-emptive kernel, enabling platform-independent template algorithms to be written once and run on any module, irrespective of its underlying hardware architecture. Applications that may benefit from easily reconfigurable modular sensing systems include flexible inspection, mobile robotics, surveillance, and space exploration.

Enterprise architecture evaluation using architecture framework and UML stereotypes

Directory of Open Access Journals (Sweden)

Narges Shahi

2014-08-01

Full Text Available There is an increasing need for enterprise architecture in numerous organizations with complicated systems with various processes. Support for information technology, organizational units whose elements maintain complex relationships increases. Enterprise architecture is so effective that its non-use in organizations is regarded as their institutional inability in efficient information technology management. The enterprise architecture process generally consists of three phases including strategic programing of information technology, enterprise architecture programing and enterprise architecture implementation. Each phase must be implemented sequentially and one single flaw in each phase may result in a flaw in the whole architecture and, consequently, in extra costs and time. If a model is mapped for the issue and then it is evaluated before enterprise architecture implementation in the second phase, the possible flaws in implementation process are prevented. In this study, the processes of enterprise architecture are illustrated through UML diagrams, and the architecture is evaluated in programming phase through transforming the UML diagrams to Petri nets. The results indicate that the high costs of the implementation phase will be reduced.

Object Detection Based on Fast/Faster RCNN Employing Fully Convolutional Architectures

Directory of Open Access Journals (Sweden)

Yun Ren

2018-01-01

Full Text Available Modern object detectors always include two major parts: a feature extractor and a feature classifier as same as traditional object detectors. The deeper and wider convolutional architectures are adopted as the feature extractor at present. However, many notable object detection systems such as Fast/Faster RCNN only consider simple fully connected layers as the feature classifier. In this paper, we declare that it is beneficial for the detection performance to elaboratively design deep convolutional networks (ConvNets of various depths for feature classification, especially using the fully convolutional architectures. In addition, this paper also demonstrates how to employ the fully convolutional architectures in the Fast/Faster RCNN. Experimental results show that a classifier based on convolutional layer is more effective for object detection than that based on fully connected layer and that the better detection performance can be achieved by employing deeper ConvNets as the feature classifier.

Instrumentation Standard Architectures for Future High Availability Control Systems

International Nuclear Information System (INIS)

Larsen, R.S.

2005-01-01

Architectures for next-generation modular instrumentation standards should aim to meet a requirement of High Availability, or robustness against system failure. This is particularly important for experiments both large and small mounted on production accelerators and light sources. New standards should be based on architectures that (1) are modular in both hardware and software for ease in repair and upgrade; (2) include inherent redundancy at internal module, module assembly and system levels; (3) include modern high speed serial inter-module communications with robust noise-immune protocols; and (4) include highly intelligent diagnostics and board-management subsystems that can predict impending failure and invoke evasive strategies. The simple design principles lead to fail-soft systems that can be applied to any type of electronics system, from modular instruments to large power supplies to pulsed power modulators to entire accelerator systems. The existing standards in use are briefly reviewed and compared against a new commercial standard which suggests a powerful model for future laboratory standard developments. The past successes of undertaking such projects through inter-laboratory engineering-physics collaborations will be briefly summarized

Architectural-level power estimation and experimentation

Science.gov (United States)

Ye, Wu

With the emergence of a plethora of embedded and portable applications and ever increasing integration levels, power dissipation of integrated circuits has moved to the forefront as a design constraint. Recent years have also seen a significant trend towards designs starting at the architectural (or RT) level. Those demand accurate yet fast RT level power estimation methodologies and tools. This thesis addresses issues and experiments associate with architectural level power estimation. An execution driven, cycle-accurate RT level power simulator, SimplePower, was developed using transition-sensitive energy models. It is based on the architecture of a five-stage pipelined RISC datapath for both 0.35mum and 0.8mum technology and can execute the integer subset of the instruction set of SimpleScalar . SimplePower measures the energy consumed in the datapath, memory and on-chip buses. During the development of SimplePower , a partitioning power modeling technique was proposed to model the energy consumed in complex functional units. The accuracy of this technique was validated with HSPICE simulation results for a register file and a shifter. A novel, selectively gated pipeline register optimization technique was proposed to reduce the datapath energy consumption. It uses the decoded control signals to selectively gate the data fields of the pipeline registers. Simulation results show that this technique can reduce the datapath energy consumption by 18--36% for a set of benchmarks. A low-level back-end compiler optimization, register relabeling, was applied to reduce the on-chip instruction cache data bus switch activities. Its impact was evaluated by SimplePower. Results show that it can reduce the energy consumed in the instruction data buses by 3.55--16.90%. A quantitative evaluation was conducted for the impact of six state-of-art high-level compilation techniques on both datapath and memory energy consumption. The experimental results provide a valuable insight for

Cognitive Architectures for Multimedia Learning

Science.gov (United States)

Reed, Stephen K.

2006-01-01

This article provides a tutorial overview of cognitive architectures that can form a theoretical foundation for designing multimedia instruction. Cognitive architectures include a description of memory stores, memory codes, and cognitive operations. Architectures that are relevant to multimedia learning include Paivio's dual coding theory,…

A Software Architecture for Adaptive Modular Sensing Systems

Directory of Open Access Journals (Sweden)

Andrew C. Lyle

2010-08-01

Full Text Available By combining a number of simple transducer modules, an arbitrarily complex sensing system may be produced to accommodate a wide range of applications. This work outlines a novel software architecture and knowledge representation scheme that has been developed to support this type of flexible and reconfigurable modular sensing system. Template algorithms are used to embed intelligence within each module. As modules are added or removed, the composite sensor is able to automatically determine its overall geometry and assume an appropriate collective identity. A virtual machine-based middleware layer runs on top of a real-time operating system with a pre-emptive kernel, enabling platform-independent template algorithms to be written once and run on any module, irrespective of its underlying hardware architecture. Applications that may benefit from easily reconfigurable modular sensing systems include flexible inspection, mobile robotics, surveillance, and space exploration.

The ATLAS Analysis Architecture

International Nuclear Information System (INIS)

Cranmer, K.S.

2008-01-01

We present an overview of the ATLAS analysis architecture including the relevant aspects of the computing model and the major architectural aspects of the Athena framework. Emphasis will be given to the interplay between the analysis use cases and the technical aspects of the architecture including the design of the event data model, transient-persistent separation, data reduction strategies, analysis tools, and ROOT interoperability

Architectural Surfaces and Structures from Circular Arcs

KAUST Repository

Shi, Ling

2013-01-01

the most attention from geometry researchers. In this thesis, we aim to realize this process with simple geometric primitives, circular arcs. We investigate architectural surfaces and structures consisting of circular arcs. Our focus is lying on how

Floating point only SIMD instruction set architecture including compare, select, Boolean, and alignment operations

Science.gov (United States)

Gschwind, Michael K [Chappaqua, NY

2011-03-01

Mechanisms for implementing a floating point only single instruction multiple data instruction set architecture are provided. A processor is provided that comprises an issue unit, an execution unit coupled to the issue unit, and a vector register file coupled to the execution unit. The execution unit has logic that implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA). The floating point vector registers of the vector register file store both scalar and floating point values as vectors having a plurality of vector elements. The processor may be part of a data processing system.

Data Architecture for Sensor Network

Directory of Open Access Journals (Sweden)

Jan Ježek

2012-03-01

Full Text Available Fast development of hardware in recent years leads to the high availability of simple sensing devices at minimal cost. As a consequence, there is many of sensor networks nowadays. These networks can continuously produce a large amount of observed data including the location of measurement. Optimal data architecture for such propose is a challenging issue due to its large scale and spatio-temporal nature.  The aim of this paper is to describe data architecture that was used in a particular solution for storage of sensor data. This solution is based on relation data model – concretely PostgreSQL and PostGIS. We will mention out experience from real world projects focused on car monitoring and project targeted on agriculture sensor networks. We will also shortly demonstrate the possibilities of client side API and the potential of other open source libraries that can be used for cartographic visualization (e.g. GeoServer. The main objective is to describe the strength and weakness of usage of relation database system for such propose and to introduce also alternative approaches based on NoSQL concept.

High Contrast Coherent Population Trapping Resonances in Cs Vapour Cells with a Simple-Architecture Laser System

International Nuclear Information System (INIS)

Liu, Xiaochi

2013-01-01

This thesis reports the development of a simple-architecture laser system resonant at 895 nm used for the detection of high-contrast coherent population trapping (CPT) resonances in Cs vapor cells. The laser system combines a distributed feedback-diode (DFB) laser, a pigtailed Mach-Zehnder intensity electro-optic modulator (EOM) driven at 4.596 GHz for the generation of optical sidebands frequency-split by 9.192 GHz and a Michelson delay-line system to produce a bi-chromatic optical field that alternates between right and left circular polarization. This polarization pumping scheme, first proposed by Happer's group in Princeton on K atoms, allows to optically pump a maximum number of Cs atoms into the 0-0 magnetic field insensitive clock transition. Advanced noise reduction techniques were implemented in order to stabilize the laser power, the optical carrier suppression at the output of the EOM and the DFB laser frequency. Using this system, we demonstrated the detection of CPT resonances with a contrast of 80% in cm-scale Cs vapor cells. This contrast was measured to be increased until a saturation effect with the laser power at the expense of the CPT line broadening. To circumvent this issue, we proposed with a simple setup Ramsey spectroscopy of CPT resonances in vapor cells to combine high-contrast and narrow line width of the CPT resonances. In this setup, the EOM is used both for optical sidebands generation and light switch to produce Ramsey interaction. Ramsey fringes of 166 Hz line width with a contrast better than 30% were detected with this setup. This laser system will be in a near future devoted to be used for the development of a high-performance CPT-based atomic clock. (author)

A Simple Signal Processing Architecture for Instantaneous Radar Polarimetry

Science.gov (United States)

2006-11-01

Stephen D. Howard, A. Robert Calderbank, Fellow, IEEE, and William Moran, Member, IEEE Abstract—This paper describes a new radar primitive that en...Skolnik, Introduction to Radar Systems, 3rd ed. New York: Mc- Graw -Hill, 2001. [14] S. Alamouti, “A simple transmit diversity technique for wireless

Developing Dynamic Field Theory Architectures for Embodied Cognitive Systems with cedar.

Science.gov (United States)

Lomp, Oliver; Richter, Mathis; Zibner, Stephan K U; Schöner, Gregor

2016-01-01

Embodied artificial cognitive systems, such as autonomous robots or intelligent observers, connect cognitive processes to sensory and effector systems in real time. Prime candidates for such embodied intelligence are neurally inspired architectures. While components such as forward neural networks are well established, designing pervasively autonomous neural architectures remains a challenge. This includes the problem of tuning the parameters of such architectures so that they deliver specified functionality under variable environmental conditions and retain these functions as the architectures are expanded. The scaling and autonomy problems are solved, in part, by dynamic field theory (DFT), a theoretical framework for the neural grounding of sensorimotor and cognitive processes. In this paper, we address how to efficiently build DFT architectures that control embodied agents and how to tune their parameters so that the desired cognitive functions emerge while such agents are situated in real environments. In DFT architectures, dynamic neural fields or nodes are assigned dynamic regimes, that is, attractor states and their instabilities, from which cognitive function emerges. Tuning thus amounts to determining values of the dynamic parameters for which the components of a DFT architecture are in the specified dynamic regime under the appropriate environmental conditions. The process of tuning is facilitated by the software framework cedar , which provides a graphical interface to build and execute DFT architectures. It enables to change dynamic parameters online and visualize the activation states of any component while the agent is receiving sensory inputs in real time. Using a simple example, we take the reader through the workflow of conceiving of DFT architectures, implementing them on embodied agents, tuning their parameters, and assessing performance while the system is coupled to real sensory inputs.

Minimalism in architecture: Architecture as a language of its identity

Directory of Open Access Journals (Sweden)

Vasilski Dragana

2012-01-01

Full Text Available Every architectural work is created on the principle that includes the meaning, and then this work is read like an artifact of the particular meaning. Resources by which the meaning is built primarily, susceptible to transformation, as well as routing of understanding (decoding messages carried by a work of architecture, are subject of semiotics and communication theories, which have played significant role for the architecture and the architect. Minimalism in architecture, as a paradigm of the XXI century architecture, means searching for essence located in the irreducible minimum. Inspired use of architectural units (archetypical elements, trough the fatasm of simplicity, assumes the primary responsibility for providing the object identity, because it participates in language formation and therefore in its reading. Volume is form by clean language that builds the expression of the fluid areas liberated of recharge needs. Reduced architectural language is appropriating to the age marked by electronic communications.

Doping chloro boron subnaphthalocyanines and chloro boron subphthalocyanine in simple OLED architectures yields warm white incandescent-like emissions

Science.gov (United States)

Plint, Trevor G.; Lessard, Benoît H.; Bender, Timothy P.

2018-01-01

We have incorporated chloro boron subphthalocyanine (Cl-BsubPc) and chloro boron subnapthalocyanines (Cl-ClnBsubNcs) into organic light emitting diodes (OLEDs) that enabled an overall warm white emission with CIE coordinates close to that of a 60 W incandescent lightbulb. More specifically, we have shown that Cl-BsubPc and Cl-ClnBsubNcs can be used as dopant emitters in a simple host-dopant architecture, and we have compared the use of NPB and Alq3 as potential hosts for these materials. When doped into Alq3, Cl-BsubPc shows a strong orange emission, and Cl-ClnBsubNcs shows a moderately strong red emission. We have further demonstrated that Cl-BsubPc and Cl-ClnBsubNcs can be co-doped into the same layer giving combined orange and red emission peaks. A "cascade" energy transfer mechanism of sequential absorption and re-emission is proposed. Device performance characteristics such as luminance, current efficiency, photoluminescence efficiency, and external quantum efficiency are tabulated. Additionally, in view of ongoing research into white emitting OLEDs for indoor lighting purposes, the Colour Rendering Index (CRI), R9 values, and CIE co-ordinates for these devices are also discussed. We conclude from this study that the BsubNc chromophore has potential application as a red dopant in OLEDs including for indoor lighting. Additionally, given the scope for axial and peripheral derivatization of the BsubNc motif, we believe that this chromophore has many unexplored molecular design handles that will affect its ultimate performance and application in OLEDs and other opto-electronic devices.

Use of Open Architecture Middleware for Autonomous Platforms

Science.gov (United States)

Naranjo, Hector; Diez, Sergio; Ferrero, Francisco

2011-08-01

Network Enabled Capabilities (NEC) is the vision for next-generation systems in the defence domain formulated by governments, the European Defence Agency (EDA) and the North Atlantic Treaty Organization (NATO). It involves the federation of military information systems, rather than just a simple interconnection, to provide each user with the "right information, right place, right time - and not too much". It defines openness, standardization and flexibility principles in military systems, likewise applicable in the civilian space applications.This paper provides the conclusions drawn from "Architecture for Embarked Middleware" (EMWARE) study, funded by the European Defence Agency (EDA).The aim of the EMWARE project was to provide the information and understanding to facilitate the adoption of informed decisions regarding the specification and implementation of Open Architecture Middleware in future distributed systems, linking it with the NEC goal.EMWARE project included the definition of four business cases, each devoted to a different field of application (Unmanned Aerial Vehicles, Helicopters, Unmanned Ground Vehicles and the Satellite Ground Segment).

On Architectural Acoustics Design using Computer Simulation

DEFF Research Database (Denmark)

Schmidt, Anne Marie Due; Kirkegaard, Poul Henning

2004-01-01

The acoustical quality of a given building, or space within the building, is highly dependent on the architectural design. Architectural acoustics design has in the past been based on simple design rules. However, with a growing complexity in the architectural acoustic and the emergence of potent...... room acoustic simulation programs it is now possible to subjectively analyze and evaluate acoustic properties prior to the actual construction of a facility. With the right tools applied, the acoustic design can become an integrated part of the architectural design process. The aim of the present paper...... this information is discussed. The conclusion of the paper is that the application of acoustical simulation programs is most beneficial in the last of three phases but that an application of the program to the two first phases would be preferable and possible with an improvement of the interface of the program....

Interplay between efficiency and device architecture for small molecule organic solar cells.

Science.gov (United States)

Williams, Graeme; Sutty, Sibi; Aziz, Hany

2014-06-21

Small molecule organic solar cells (OSCs) have experienced a resurgence of interest over their polymer solar cell counterparts, owing to their improved batch-to-batch (thus, cell-to-cell) reliability. In this systematic study on OSC device architecture, we investigate five different small molecule OSC structures, including the simple planar heterojunction (PHJ) and bulk heterojunction (BHJ), as well as several planar-mixed structures. The different OSC structures are studied over a wide range of donor:acceptor mixing concentrations to gain a comprehensive understanding of their charge transport behavior. Transient photocurrent decay measurements provide crucial information regarding the interplay between charge sweep-out and charge recombination, and ultimately hint toward space charge effects in planar-mixed structures. Results show that the BHJ/acceptor architecture, comprising a BHJ layer with high C60 acceptor content, generates OSCs with the highest performance by balancing charge generation with charge collection. The performance of other device architectures is largely limited by hole transport, with associated hole accumulation and space charge effects.

High-level language computer architecture

CERN Document Server

Chu, Yaohan

1975-01-01

High-Level Language Computer Architecture offers a tutorial on high-level language computer architecture, including von Neumann architecture and syntax-oriented architecture as well as direct and indirect execution architecture. Design concepts of Japanese-language data processing systems are discussed, along with the architecture of stack machines and the SYMBOL computer system. The conceptual design of a direct high-level language processor is also described.Comprised of seven chapters, this book first presents a classification of high-level language computer architecture according to the pr

Towards a semantic web layered architecture

CSIR Research Space (South Africa)

Gerber, AJ

2007-02-01

Full Text Available as an architectural pattern or architectural style [6, 43]. In this section we give a brief description of the con- cepts software architecture and layered architecture. In ad- dition we provide a summary of a list of criteria for layered architectures identified...- els caused some architectural recurrences to evolve. These are described as architectural patterns [6] or architectural styles [43]. Examples of the best known architectural patterns include, but are not limited to, the client/server architectural...

Design and implementation of dynamic microservice discovery solution in cloud architectures

OpenAIRE

Malc, Urban

2017-01-01

Microservice architecture offers many advantages over monolithic application design, but at the same time presents challenges, not present in traditional architectures. One of the challenges is handling dynamic allocation of microservice addresses. Modern applications, built in microservice arhitecture typically run in containerized environments, which enable simple deployment and horizontal scaling of microservices. Containerized environments usually allocate microservice addresses dynamical...

Transverse pumped laser amplifier architecture

Science.gov (United States)

Bayramian, Andrew James; Manes, Kenneth; Deri, Robert; Erlandson, Al; Caird, John; Spaeth, Mary

2013-07-09

An optical gain architecture includes a pump source and a pump aperture. The architecture also includes a gain region including a gain element operable to amplify light at a laser wavelength. The gain region is characterized by a first side intersecting an optical path, a second side opposing the first side, a third side adjacent the first and second sides, and a fourth side opposing the third side. The architecture further includes a dichroic section disposed between the pump aperture and the first side of the gain region. The dichroic section is characterized by low reflectance at a pump wavelength and high reflectance at the laser wavelength. The architecture additionally includes a first cladding section proximate to the third side of the gain region and a second cladding section proximate to the fourth side of the gain region.

Grid Architecture 2

Energy Technology Data Exchange (ETDEWEB)

Taft, Jeffrey D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-01-01

The report describes work done on Grid Architecture under the auspices of the Department of Electricity Office of Electricity Delivery and Reliability in 2015. As described in the first Grid Architecture report, the primary purpose of this work is to provide stakeholder insight about grid issues so as to enable superior decision making on their part. Doing this requires the creation of various work products, including oft-times complex diagrams, analyses, and explanations. This report provides architectural insights into several important grid topics and also describes work done to advance the science of Grid Architecture as well.

Developing dynamic field theory architectures for embodied cognitive systems with cedar

Directory of Open Access Journals (Sweden)

Oliver Lomp

2016-11-01

Full Text Available Embodied artificial cognitive systems such as autonomous robots or intelligent observers connect cognitive processes to sensory and effector systems in real time. Prime candidates for such embodied intelligence are neurally inspired architectures. While components such as forward neural networks are well established, designing pervasively autonomous neural architectures remains a challenge. This includes the problem of tuning the parameters of such architectures so that they deliver specified functionality under variable environmental conditions and retain these functions as the architectures are expanded. The scaling and autonomy problems are solved, in part, by dynamic field theory (DFT, a theoretical framework for the neural grounding of sensorimotor and cognitive processes. In this paper, we address how to efficiently build DFT architectures that control embodied agents and how to tune their parameters so that the desired cognitive functions emerge while such agents are situated in real environments. In DFT architectures, dynamic neural fields or nodes are assigned dynamic regimes, that is, attractor states and their instabilities, from which cognitive function emerges. Tuning thus amounts to determining values of the dynamic parameters for which the components of a DFT architecture are in the specified dynamic regime under the appropriate environmental conditions. The process of tuning is facilitated by the software framework cedar, which provides a graphical interface to build and execute DFT architectures. It enables to change dynamic parameters online and visualize the activation states of any component while the agent is receiving sensory inputs in real-time. Using a simple example, we take the reader through the workflow of conceiving of DFT architectures, implementing them on embodied agents, tuning their parameters, and assessing performance while the system is coupled to real sensory inputs.

Maglev Train Signal Processing Architecture Based on Nonlinear Discrete Tracking Differentiator.

Science.gov (United States)

Wang, Zhiqiang; Li, Xiaolong; Xie, Yunde; Long, Zhiqiang

2018-05-24

In a maglev train levitation system, signal processing plays an important role for the reason that some sensor signals are prone to be corrupted by noise due to the harsh installation and operation environment of sensors and some signals cannot be acquired directly via sensors. Based on these concerns, an architecture based on a new type of nonlinear second-order discrete tracking differentiator is proposed. The function of this signal processing architecture includes filtering signal noise and acquiring needed signals for levitation purposes. The proposed tracking differentiator possesses the advantages of quick convergence, no fluttering, and simple calculation. Tracking differentiator's frequency characteristics at different parameter values are studied in this paper. The performance of this new type of tracking differentiator is tested in a MATLAB simulation and this tracking-differentiator is implemented in Very-High-Speed Integrated Circuit Hardware Description Language (VHDL). In the end, experiments are conducted separately on a test board and a maglev train model. Simulation and experiment results show that the performance of this novel signal processing architecture can fulfill the real system requirement.

Maglev Train Signal Processing Architecture Based on Nonlinear Discrete Tracking Differentiator

Directory of Open Access Journals (Sweden)

Zhiqiang Wang

2018-05-01

Full Text Available In a maglev train levitation system, signal processing plays an important role for the reason that some sensor signals are prone to be corrupted by noise due to the harsh installation and operation environment of sensors and some signals cannot be acquired directly via sensors. Based on these concerns, an architecture based on a new type of nonlinear second-order discrete tracking differentiator is proposed. The function of this signal processing architecture includes filtering signal noise and acquiring needed signals for levitation purposes. The proposed tracking differentiator possesses the advantages of quick convergence, no fluttering, and simple calculation. Tracking differentiator’s frequency characteristics at different parameter values are studied in this paper. The performance of this new type of tracking differentiator is tested in a MATLAB simulation and this tracking-differentiator is implemented in Very-High-Speed Integrated Circuit Hardware Description Language (VHDL. In the end, experiments are conducted separately on a test board and a maglev train model. Simulation and experiment results show that the performance of this novel signal processing architecture can fulfill the real system requirement.

Search for design intelligence: A field study on the role of emotional intelligence in architectural design studios

Directory of Open Access Journals (Sweden)

Sajjad Nazidizaji

2014-12-01

Full Text Available The design studio is the core of the architecture curriculum. Interpersonal interactions have a key role during the processes of design and critique. The influence of emotional intelligence (EQ on interpersonal communication skills has been widely proven. This study examines the correlation between EQ and architectural design competence. To achieve this, 78 architecture students were selected via a simple random sampling method and tested using an EQ test questionnaire developed by Bradbury and Greaves (2006. The scores of five architectural design studio courses (ADS-1, ADS-2, ADS-3, ADS-4, and ADS-5 were used as indicators of the progress in design of the students. Descriptive and inferential statistics methods were both employed to analyze the research data. The methods included correlation analysis, mean comparison t-test for independent samples, and single sample t-test. Findings showed no significant relationship between EQ and any of the indicators.

From functional architecture to functional connectomics.

Science.gov (United States)

Reid, R Clay

2012-07-26

"Receptive Fields, Binocular Interaction and Functional Architecture in the Cat's Visual Cortex" by Hubel and Wiesel (1962) reported several important discoveries: orientation columns, the distinct structures of simple and complex receptive fields, and binocular integration. But perhaps the paper's greatest influence came from the concept of functional architecture (the complex relationship between in vivo physiology and the spatial arrangement of neurons) and several models of functionally specific connectivity. They thus identified two distinct concepts, topographic specificity and functional specificity, which together with cell-type specificity constitute the major determinants of nonrandom cortical connectivity. Orientation columns are iconic examples of topographic specificity, whereby axons within a column connect with cells of a single orientation preference. Hubel and Wiesel also saw the need for functional specificity at a finer scale in their model of thalamic inputs to simple cells, verified in the 1990s. The difficult but potentially more important question of functional specificity between cortical neurons is only now becoming tractable with new experimental techniques. Copyright © 2012 Elsevier Inc. All rights reserved.

Evaluating Architecture Implementation Alternatives based on Adaptability Concerns

NARCIS (Netherlands)

Aksit, Mehmet; Tekinerdogan, B.

Software is rarely designed for ultimate adaptability, performance or reusability but rather it is a compromise of multiple considerations. Even for a simple architecture specification, one may identify many alternative implementations. This paper makes an attempt to depict the space of

Theories of minimalism in architecture: Post scriptum

Directory of Open Access Journals (Sweden)

Stevanović Vladimir

2012-01-01

Full Text Available Owing to the period of intensive development in the last decade of XX century, architectural phenomenon called Minimalism in Architecture was remembered as the Style of the Nineties, which is characterized, morphologically speaking, by simplicity and formal reduction. Simultaneously with its development in practice, on a theoretical level several dominant interpretative models were able to establish themselves. The new millennium and time distance bring new problems; therefore this paper represents a discussion on specific theorization related to Minimalism in Architecture that can bear the designation of post scriptum, because their development starts after the constitutional period of architectural minimalist discourse. In XXI century theories, the problem of definition of minimalism remains important topic, approached by theorists through resolving on the axis: Modernism - Minimal Art - Postmodernism - Minimalism in Architecture. With regard to this, analyzed texts can be categorized in two groups: 1 texts of affirmative nature and historical-associative approach in which minimalism is identified with anything that is simple and reduced, in an idealizing manner, relied mostly on the existing hypotheses; 2 critically oriented texts, in which authors reconsider adequacy of the very term 'minimalism' in the context of architecture and take a metacritical attitude towards previous texts.

Developing Distributed System With Service Resource Oriented Architecture

Directory of Open Access Journals (Sweden)

Hermawan Hermawan

2012-06-01

Full Text Available Service Oriented Architecture is a design paradigm in software engineering with which a distributed system is built for an enterprise. This paradigm aims at providing the system as a service through a protocol in web service technology, namely Simple Object Access Protocol (SOAP. However, SOA is service level agreements of webservice. For this reason, this reasearch aims at combining SOA with Resource Oriented Architecture in order to expand scalability of services. This combination creates Sevice Resource Oriented Architecture (SROA with which a distributed system is developed that integrates services within project management software. Following this design, the software is developed according to a framework of Agile Model Driven Development which can reduce complexities of the whole process of software development.

Self-assembly of Fe3O4 nanocrystal-clusters into cauliflower-like architectures: Synthesis and characterization

International Nuclear Information System (INIS)

Zhu Luping; Liao Guihong; Bing Naici; Wang Linlin; Xie Hongyong

2011-01-01

Large-scale cauliflower-like Fe 3 O 4 architectures consist of well-assembled magnetite nanocrystal clusters have been synthesized by a simple solvothermal process. The as-synthesized Fe 3 O 4 samples were characterized by XRD, XPS, FT-IR, SEM, TEM, etc. The results show that the samples exhibit cauliflower-like hierarchical microstructures. The influences of synthesis parameters on the morphology of the samples were experimentally investigated. Magnetic properties of the Fe 3 O 4 cauliflower-like hierarchical microstructures have been detected by VSM at room temperature, showing a relatively low saturation magnetization of 65 emu/g and an enhanced coercive force of 247 Oe. - Graphical Abstract: Cauliflower-like Fe 3 O 4 architectures consist of well-assembled magnetite nanocrystal clusters have been synthesized by a simple solvothermal process, using FeCl 3 .6H 2 O and EDA as the starting materials. Highlights: → Cauliflower-like Fe 3 O 4 architectures were successfully prepared by a simple solvothermal route. → The cauliflower-like Fe 3 O 4 architectures have a size in the range of 200-300 nm. → They show a low saturation magnetization of 65 emu/g and an enhanced coercive force of 247 Oe. → These Fe 3 O 4 architectures may have potential applications in catalysis and biological fields.

From green architecture to architectural green

DEFF Research Database (Denmark)

Earon, Ofri

2011-01-01

that describes the architectural exclusivity of this particular architecture genre. The adjective green expresses architectural qualities differentiating green architecture from none-green architecture. Currently, adding trees and vegetation to the building’s facade is the main architectural characteristics...... they have overshadowed the architectural potential of green architecture. The paper questions how a green space should perform, look like and function. Two examples are chosen to demonstrate thorough integrations between green and space. The examples are public buildings categorized as pavilions. One......The paper investigates the topic of green architecture from an architectural point of view and not an energy point of view. The purpose of the paper is to establish a debate about the architectural language and spatial characteristics of green architecture. In this light, green becomes an adjective...

Religious architecture: anthropological perspectives

NARCIS (Netherlands)

Verkaaik, O.

2013-01-01

Religious Architecture: Anthropological Perspectives develops an anthropological perspective on modern religious architecture, including mosques, churches and synagogues. Borrowing from a range of theoretical perspectives on space-making and material religion, this volume looks at how religious

Architecture on Architecture

DEFF Research Database (Denmark)

Olesen, Karen

2016-01-01

that is not scientific or academic but is more like a latent body of data that we find embedded in existing works of architecture. This information, it is argued, is not limited by the historical context of the work. It can be thought of as a virtual capacity – a reservoir of spatial configurations that can...... correlation between the study of existing architectures and the training of competences to design for present-day realities.......This paper will discuss the challenges faced by architectural education today. It takes as its starting point the double commitment of any school of architecture: on the one hand the task of preserving the particular knowledge that belongs to the discipline of architecture, and on the other hand...

The relationship between nectaries and floral architecture: a case study in Geraniaceae and Hypseocharitaceae.

Science.gov (United States)

Jeiter, Julius; Hilger, Hartmut H; Smets, Erik F; Weigend, Maximilian

2017-11-10

Flowers of Geraniaceae and Hypseocharitaceae are generally considered as morphologically simple. However, previous studies indicated complex diversity in floral architecture including tendencies towards synorganization. Most of the species have nectar-rewarding flowers which makes the nectaries a key component of floral organization and architecture. Here, the development of the floral nectaries is studied and placed into the context of floral architecture. Seven species from Geraniaceae and one from Hypseocharitaceae were investigated using scanning electron microscopy and light microscopy. Samples were prepared and processed using standard protocols. The development of the nectary glands follows the same trajectory in all species studied. Minor differences occur in the onset of nectarostomata development. The most striking finding is the discovery that a short anthophore develops via intercalary growth at the level of the nectary glands. This anthophore lifts up the entire flower apart from the nectary gland itself and thus plays an important role in floral architecture, especially in the flowers of Pelargonium. Here, the zygomorphic flowers show a particularly extensive receptacular growth, resulting in the formation of a spur-like receptacular cavity ('inner spur'). The nectary gland is hidden at the base of the cavity. Various forms of compartmentalization, culminating in the 'revolver flower' of Geranium maderense, are described. Despite the superficial similarity of the flowers in Geraniaceae and Hypseocharitaceae, there is broad diversity in floral organization and floral architecture. While the receptacular origin of the spur-like cavity in Pelargonium had already been described, anthophore formation via intercalary growth of the receptacle in the other genera had not been previously documented. In the context of the most recent phylogenies of the families, an evolutionary series for the floral architecture is proposed, underscoring the importance of

Virtual Sensor Web Architecture

Science.gov (United States)

Bose, P.; Zimdars, A.; Hurlburt, N.; Doug, S.

2006-12-01

NASA envisions the development of smart sensor webs, intelligent and integrated observation network that harness distributed sensing assets, their associated continuous and complex data sets, and predictive observation processing mechanisms for timely, collaborative hazard mitigation and enhanced science productivity and reliability. This paper presents Virtual Sensor Web Infrastructure for Collaborative Science (VSICS) Architecture for sustained coordination of (numerical and distributed) model-based processing, closed-loop resource allocation, and observation planning. VSICS's key ideas include i) rich descriptions of sensors as services based on semantic markup languages like OWL and SensorML; ii) service-oriented workflow composition and repair for simple and ensemble models; event-driven workflow execution based on event-based and distributed workflow management mechanisms; and iii) development of autonomous model interaction management capabilities providing closed-loop control of collection resources driven by competing targeted observation needs. We present results from initial work on collaborative science processing involving distributed services (COSEC framework) that is being extended to create VSICS.

Realistic absorption coefficient of each individual film in a multilayer architecture

Science.gov (United States)

Cesaria, M.; Caricato, A. P.; Martino, M.

2015-02-01

A spectrophotometric strategy, termed multilayer-method (ML-method), is presented and discussed to realistically calculate the absorption coefficient of each individual layer embedded in multilayer architectures without reverse engineering, numerical refinements and assumptions about the layer homogeneity and thickness. The strategy extends in a non-straightforward way a consolidated route, already published by the authors and here termed basic-method, able to accurately characterize an absorbing film covering transparent substrates. The ML-method inherently accounts for non-measurable contribution of the interfaces (including multiple reflections), describes the specific film structure as determined by the multilayer architecture and used deposition approach and parameters, exploits simple mathematics, and has wide range of applicability (high-to-weak absorption regions, thick-to-ultrathin films). Reliability tests are performed on films and multilayers based on a well-known material (indium tin oxide) by deliberately changing the film structural quality through doping, thickness-tuning and underlying supporting-film. Results are found consistent with information obtained by standard (optical and structural) analysis, the basic-method and band gap values reported in the literature. The discussed example-applications demonstrate the ability of the ML-method to overcome the drawbacks commonly limiting an accurate description of multilayer architectures.

Architecture for autonomy

Science.gov (United States)

Broten, Gregory S.; Monckton, Simon P.; Collier, Jack; Giesbrecht, Jared

2006-05-01

In 2002 Defence R&D Canada changed research direction from pure tele-operated land vehicles to general autonomy for land, air, and sea craft. The unique constraints of the military environment coupled with the complexity of autonomous systems drove DRDC to carefully plan a research and development infrastructure that would provide state of the art tools without restricting research scope. DRDC's long term objectives for its autonomy program address disparate unmanned ground vehicle (UGV), unattended ground sensor (UGS), air (UAV), and subsea and surface (UUV and USV) vehicles operating together with minimal human oversight. Individually, these systems will range in complexity from simple reconnaissance mini-UAVs streaming video to sophisticated autonomous combat UGVs exploiting embedded and remote sensing. Together, these systems can provide low risk, long endurance, battlefield services assuming they can communicate and cooperate with manned and unmanned systems. A key enabling technology for this new research is a software architecture capable of meeting both DRDC's current and future requirements. DRDC built upon recent advances in the computing science field while developing its software architecture know as the Architecture for Autonomy (AFA). Although a well established practice in computing science, frameworks have only recently entered common use by unmanned vehicles. For industry and government, the complexity, cost, and time to re-implement stable systems often exceeds the perceived benefits of adopting a modern software infrastructure. Thus, most persevere with legacy software, adapting and modifying software when and wherever possible or necessary -- adopting strategic software frameworks only when no justifiable legacy exists. Conversely, academic programs with short one or two year projects frequently exploit strategic software frameworks but with little enduring impact. The open-source movement radically changes this picture. Academic frameworks

An annunciator architecture for the year 2000

International Nuclear Information System (INIS)

Adams, D.G.; Fitzgerald, D.S.; Ortiz, S.

1996-01-01

Exciting new safeguards and security technologies are on the horizon, and some are even on the shelves today. Self-testing sensors, smart sensors, and intelligent alarm analyzers are all designed to provide useful information to the operator. However, today''s current annunciator systems were not designed to accommodate these new technologies. New display technologies are also changing the look and feel of the annunciator of the future. Annunciator technology needs to catch up to these other security technologies. This paper presents the concept for a new, object-oriented approach to annunciator architecture design. The new architecture could accommodate simple, switch-closure devices as well as information-rich sensors and intelligent analyzers. In addition the architecture could allow other leading-edge interfaces to be easily integrated into the annunciator system. These technologies will reduce operator workload and aid the operator in making informed security decisions

Italian bioclimatic architecture

Energy Technology Data Exchange (ETDEWEB)

D' Errico, E

1987-04-01

This paper deals with the results of solar space heating research developed within the Finalized Energy Project of the National Research Council of Italy. Energy and cost/benefit parameters were compared for a certain number of Italian buildings incorporating solar architecture. The technical and economic analysis was performed on 31 buildings, of which 24 are residential, and 7 are schools, with different solar devices (direct gain, Trombe walls, sunspaces, hybrid systems). The buildings were constructed between 1976 and 1982. The results emphasize that simple technologies with lower costs and good design usually have a higher performance/cost ratio.

Architecture for the senses

DEFF Research Database (Denmark)

Ryhl, Camilla

2009-01-01

Accommodating sensory disabilities in architectural design requires specific design considerations. These are different from the ones included by the existing design concept 'accessibility', which primarily accommodates physical disabilites. Hence a new design concept 'sensory accessbility......' is presented as a parallel and complementary concept to the existing one. Sensory accessiblity accommodates sensory disabilities and describes architectural design requirements needed to ensure access to to the sensory experiences and architectural quality of a given space. The article is based on research...

Architectural Analysis of Dynamically Reconfigurable Systems

Science.gov (United States)

Lindvall, Mikael; Godfrey, Sally; Ackermann, Chris; Ray, Arnab; Yonkwa, Lyly

2010-01-01

oTpics include: the problem (increased flexibility of architectural styles decrease analyzability, behavior emerges and varies depending on the configuration, does the resulting system run according to the intended design, and architectural decisions can impede or facilitate testing); top down approach to architecture analysis, detection of defects and deviations, and architecture and its testability; currently targeted projects GMSEC and CFS; analyzing software architectures; analyzing runtime events; actual architecture recognition; GMPUB in Dynamic SAVE; sample output from new approach; taking message timing delays into account; CFS examples of architecture and testability; some recommendations for improved testablity; and CFS examples of abstract interfaces and testability; CFS example of opening some internal details.

Information Architecture: Looking Ahead.

Science.gov (United States)

Rosenfeld, Louis

2002-01-01

Considers the future of the field of information architecture. Highlights include a comparison with the growth of the field of professional management; the design of information systems since the Web; more demanding users; the need for an interdisciplinary approach; and how to define information architecture. (LRW)

A Low Cost VLSI Architecture for Spike Sorting Based on Feature Extraction with Peak Search.

Science.gov (United States)

Chang, Yuan-Jyun; Hwang, Wen-Jyi; Chen, Chih-Chang

2016-12-07

The goal of this paper is to present a novel VLSI architecture for spike sorting with high classification accuracy, low area costs and low power consumption. A novel feature extraction algorithm with low computational complexities is proposed for the design of the architecture. In the feature extraction algorithm, a spike is separated into two portions based on its peak value. The area of each portion is then used as a feature. The algorithm is simple to implement and less susceptible to noise interference. Based on the algorithm, a novel architecture capable of identifying peak values and computing spike areas concurrently is proposed. To further accelerate the computation, a spike can be divided into a number of segments for the local feature computation. The local features are subsequently merged with the global ones by a simple hardware circuit. The architecture can also be easily operated in conjunction with the circuits for commonly-used spike detection algorithms, such as the Non-linear Energy Operator (NEO). The architecture has been implemented by an Application-Specific Integrated Circuit (ASIC) with 90-nm technology. Comparisons to the existing works show that the proposed architecture is well suited for real-time multi-channel spike detection and feature extraction requiring low hardware area costs, low power consumption and high classification accuracy.

Success in Architecture: Handedness and/or Visual Thinking.

Science.gov (United States)

Peterson, John M.; Lansky, Leonard M.

1980-01-01

Some data on sex and handedness in relation to academic predictors and success in architectural education were reexamined. The new variable was the notion of visual thinking, measured by the manner, "visually" or "cognitively," of executing a simple line drawing. As expected, significant differences appeared between persons using these modes.…

Using Container Structures in Architecture and Urban Design

Science.gov (United States)

Grębowski, Karol; Kałdunek, Daniel

2017-10-01

The paper presents the use of shipping containers in architecture and urban design. Even today, houses and apartments are still too expensive. Since 1923 architects have been improving the living conditions of citizens by building very simple, repeatable forms. With prefabrication technology it became possible to build quicker, causing house prices to decrease. Apartments in block of flats became affordable to more and more people. Modernism had great impact on the quality of living spaces, despite the detrimental effect of large panel technology on social life. It gave people their own bathrooms, and gifted them with simple solutions we now consider indispensable. The ambition to build cheaply but effectively is still here. The future of housing lies in prefabricated apartment modules. A well optimized creation process is the key, but taking into consideration the mistakes made by past generations should be the second most important factor. Studies show that large panel buildings were too monumental and solid for a housing structure, and offered no public spaces between them. Lack of urban design transformed a great idea into blocks that are considered to be ugly and unfriendly. Diversity is something that large panel structures were missing. While most block of flats were being constructed out of the same module (Model 770), differentiated architecture was difficult to achieve. Nowadays, increasing numbers of shipping containers are being used for housing purposes. These constructions show that it is possible to create astonishing housing with modules. Shipping containers were not designed to be a building material, but in contrast to large panel modules, there are many more possibilities of their transformation. In this paper the authors propose a set of rules that, if followed, would result in cheaper apartments, while keeping in consideration both tremendous architecture and friendly urban design. What is more, the proposed solution is designed to adapt to

A parallel architecture for digital filtering using Fermat number transforms

Science.gov (United States)

Truong, T. K.; Reed, I. S.; Yeh, C.-S.; Shao, H. M.

1983-01-01

In this correspondence, a parallel architecture is developed to compute the linear convolution of two sequences of arbitrary lengths using the Fermat number transform (FNT). In particular, a pipeline structure is designed to compute a 128-point FNT. In this FNT, only additions and bit rotations are required. The overlap-save method is generalized for the FNT to realize a digital filter of arbitrary length. The generalized overlap-save method alleviates the usual dynamic range limitation of FNT's of long transform lengths. A parallel architecture is developed to realize this type of overlap-save method using one FNT and several inverse FNT's of 128 points. Its architecture is regular, simple, and flexible, and therefore naturally suitable for VLSI implementation.

Nanoscale nuclear architecture for cancer diagnosis by spatial-domain low-coherence quantitative phase microscopy

Science.gov (United States)

Wang, Pin; Bista, Rajan K.; Khalbuss, Walid E.; Qiu, Wei; Staton, Kevin D.; Zhang, Lin; Brentnall, Teresa A.; Brand, Randall E.; Liu, Yang

2011-03-01

Alterations in nuclear architecture are the hallmark diagnostic characteristic of cancer cells. In this work, we show that the nuclear architectural characteristics quantified by spatial-domain low-coherence quantitative phase microscopy (SL-QPM), is more sensitive for the identification of cancer cells than conventional cytopathology. We demonstrated the importance of nuclear architectural characteristics in both an animal model of intestinal carcinogenesis - APC/Min mouse model and human cytology specimens with colorectal cancer by identifying cancer from cytologically noncancerous appearing cells. The determination of nanoscale nuclear architecture using this simple and practical optical instrument is a significant advance towards cancer diagnosis.

Program Execution on Reconfigurable Multicore Architectures

Directory of Open Access Journals (Sweden)

Sanjiva Prasad

2016-06-01

Full Text Available Based on the two observations that diverse applications perform better on different multicore architectures, and that different phases of an application may have vastly different resource requirements, Pal et al. proposed a novel reconfigurable hardware approach for executing multithreaded programs. Instead of mapping a concurrent program to a fixed architecture, the architecture adaptively reconfigures itself to meet the application's concurrency and communication requirements, yielding significant improvements in performance. Based on our earlier abstract operational framework for multicore execution with hierarchical memory structures, we describe execution of multithreaded programs on reconfigurable architectures that support a variety of clustered configurations. Such reconfiguration may not preserve the semantics of programs due to the possible introduction of race conditions arising from concurrent accesses to shared memory by threads running on the different cores. We present an intuitive partial ordering notion on the cluster configurations, and show that the semantics of multithreaded programs is always preserved for reconfigurations "upward" in that ordering, whereas semantics preservation for arbitrary reconfigurations can be guaranteed for well-synchronised programs. We further show that a simple approximate notion of efficiency of execution on the different configurations can be obtained using the notion of amortised bisimulations, and extend it to dynamic reconfiguration.

Reasons for Implementing Movement in Kinetic Architecture

Science.gov (United States)

Cudzik, Jan; Nyka, Lucyna

2017-10-01

The paper gives insights into different forms of movement in contemporary architecture and examines them based on the reasons for their implementation. The main objective of the paper is to determine: the degree to which the complexity of kinematic architecture results from functional and spatial needs and what other motivations there are. The method adopted to investigate these questions involves theoretical studies and comparative analyses of architectural objects with different forms of movement imbedded in their structure. Using both methods allowed delving into reasons that lie behind the implementation of movement in contemporary kinetic architecture. As research shows, there is a constantly growing range of applications with kinematic solutions inserted in buildings’ structures. The reasons for their implementation are manifold and encompass pursuits of functional qualities, environmental performance, spatial effects, social interactions and new aesthetics. In those early projects based on simple mechanisms, the main motives were focused on functional values and in later experiments - on improving buildings’ environmental performance. Additionally, in recent proposals, a significant quest could be detected toward kinematic solutions that are focused on factors related to alternative aesthetics and innovative spatial effects. Research reveals that the more complicated form of movement, the more often the reason for its implementation goes beyond the traditionally understood “function”. However, research also shows that the effects resulting from investigations on spatial qualities of architecture and new aesthetics often appear to provide creative insights into new functionalities in architecture.

PICNIC Architecture.

Science.gov (United States)

Saranummi, Niilo

2005-01-01

The PICNIC architecture aims at supporting inter-enterprise integration and the facilitation of collaboration between healthcare organisations. The concept of a Regional Health Economy (RHE) is introduced to illustrate the varying nature of inter-enterprise collaboration between healthcare organisations collaborating in providing health services to citizens and patients in a regional setting. The PICNIC architecture comprises a number of PICNIC IT Services, the interfaces between them and presents a way to assemble these into a functioning Regional Health Care Network meeting the needs and concerns of its stakeholders. The PICNIC architecture is presented through a number of views relevant to different stakeholder groups. The stakeholders of the first view are national and regional health authorities and policy makers. The view describes how the architecture enables the implementation of national and regional health policies, strategies and organisational structures. The stakeholders of the second view, the service viewpoint, are the care providers, health professionals, patients and citizens. The view describes how the architecture supports and enables regional care delivery and process management including continuity of care (shared care) and citizen-centred health services. The stakeholders of the third view, the engineering view, are those that design, build and implement the RHCN. The view comprises four sub views: software engineering, IT services engineering, security and data. The proposed architecture is founded into the main stream of how distributed computing environments are evolving. The architecture is realised using the web services approach. A number of well established technology platforms and generic standards exist that can be used to implement the software components. The software components that are specified in PICNIC are implemented in Open Source.

Fault-tolerant architectures for superconducting qubits

International Nuclear Information System (INIS)

DiVincenzo, David P

2009-01-01

In this short review, I draw attention to new developments in the theory of fault tolerance in quantum computation that may give concrete direction to future work in the development of superconducting qubit systems. The basics of quantum error-correction codes, which I will briefly review, have not significantly changed since their introduction 15 years ago. But an interesting picture has emerged of an efficient use of these codes that may put fault-tolerant operation within reach. It is now understood that two-dimensional surface codes, close relatives of the original toric code of Kitaev, can be adapted as shown by Raussendorf and Harrington to effectively perform logical gate operations in a very simple planar architecture, with error thresholds for fault-tolerant operation simulated to be 0.75%. This architecture uses topological ideas in its functioning, but it is not 'topological quantum computation'-there are no non-abelian anyons in sight. I offer some speculations on the crucial pieces of superconducting hardware that could be demonstrated in the next couple of years that would be clear stepping stones towards this surface-code architecture.

Error Resilience in Current Distributed Video Coding Architectures

Directory of Open Access Journals (Sweden)

Tonoli Claudia

2009-01-01

Full Text Available In distributed video coding the signal prediction is shifted at the decoder side, giving therefore most of the computational complexity burden at the receiver. Moreover, since no prediction loop exists before transmission, an intrinsic robustness to transmission errors has been claimed. This work evaluates and compares the error resilience performance of two distributed video coding architectures. In particular, we have considered a video codec based on the Stanford architecture (DISCOVER codec and a video codec based on the PRISM architecture. Specifically, an accurate temporal and rate/distortion based evaluation of the effects of the transmission errors for both the considered DVC architectures has been performed and discussed. These approaches have been also compared with H.264/AVC, in both cases of no error protection, and simple FEC error protection. Our evaluations have highlighted in all cases a strong dependence of the behavior of the various codecs to the content of the considered video sequence. In particular, PRISM seems to be particularly well suited for low-motion sequences, whereas DISCOVER provides better performance in the other cases.

Design and Training of Limited-Interconnect Architectures

Science.gov (United States)

1991-07-16

and signal processing. Neuromorphic (brain like) models, allow an alternative for achieving real-time operation tor such tasks, while having a...compact and robust architecture. Neuromorphic models consist of interconnections of simple computational nodes. In this approach, each node computes a...operational performance. I1. Research Objectives The research objectives were: 1. Development of on- chip local training rules specifically designed for

Architectural design for a topological cluster state quantum computer

International Nuclear Information System (INIS)

Devitt, Simon J; Munro, William J; Nemoto, Kae; Fowler, Austin G; Stephens, Ashley M; Greentree, Andrew D; Hollenberg, Lloyd C L

2009-01-01

The development of a large scale quantum computer is a highly sought after goal of fundamental research and consequently a highly non-trivial problem. Scalability in quantum information processing is not just a problem of qubit manufacturing and control but it crucially depends on the ability to adapt advanced techniques in quantum information theory, such as error correction, to the experimental restrictions of assembling qubit arrays into the millions. In this paper, we introduce a feasible architectural design for large scale quantum computation in optical systems. We combine the recent developments in topological cluster state computation with the photonic module, a simple chip-based device that can be used as a fundamental building block for a large-scale computer. The integration of the topological cluster model with this comparatively simple operational element addresses many significant issues in scalable computing and leads to a promising modular architecture with complete integration of active error correction, exhibiting high fault-tolerant thresholds.

A memory-array architecture for computer vision

Energy Technology Data Exchange (ETDEWEB)

Balsara, P.T.

1989-01-01

With the fast advances in the area of computer vision and robotics there is a growing need for machines that can understand images at a very high speed. A conventional von Neumann computer is not suited for this purpose because it takes a tremendous amount of time to solve most typical image processing problems. Exploiting the inherent parallelism present in various vision tasks can significantly reduce the processing time. Fortunately, parallelism is increasingly affordable as hardware gets cheaper. Thus it is now imperative to study computer vision in a parallel processing framework. The author should first design a computational structure which is well suited for a wide range of vision tasks and then develop parallel algorithms which can run efficiently on this structure. Recent advances in VLSI technology have led to several proposals for parallel architectures for computer vision. In this thesis he demonstrates that a memory array architecture with efficient local and global communication capabilities can be used for high speed execution of a wide range of computer vision tasks. This architecture, called the Access Constrained Memory Array Architecture (ACMAA), is efficient for VLSI implementation because of its modular structure, simple interconnect and limited global control. Several parallel vision algorithms have been designed for this architecture. The choice of vision problems demonstrates the versatility of ACMAA for a wide range of vision tasks. These algorithms were simulated on a high level ACMAA simulator running on the Intel iPSC/2 hypercube, a parallel architecture. The results of this simulation are compared with those of sequential algorithms running on a single hypercube node. Details of the ACMAA processor architecture are also presented.

Viable Syntax: Rethinking Minimalist Architecture

Directory of Open Access Journals (Sweden)

Ken Safir

2010-03-01

Full Text Available Hauser et al. (2002 suggest that the human language faculty emerged as a genetic innovation in the form of what is called here a ‘keystone factor’—a single, simple, formal mental capability that, interacting with the pre-existing faculties of hominid ancestors, caused a cascade of effects resulting in the language faculty in modern humans. They take Merge to be the keystone factor, but instead it is posited here that Merge is the pre-existing mechanism of thought made viable by a principle that permits relations interpretable at the interfaces to be mapped onto c-command. The simplified minimalist architecture proposed here respects the keystone factor as closely as possible, but is justified on the basis of linguistic analyses it makes available, including a relativized intervention theory applicable across Case, scope, agreement, selection and linearization, a derivation of the A/A’-distinction from Case theory, and predictions such as why in situ wh-interpretation is island-insensitive, but susceptible to intervention effects.

GAUDI-Architecture design document

CERN Document Server

Mato, P

1998-01-01

98-064 This document is the result of the architecture design phase for the LHCb event data processing applications project. The architecture of the LHCb software system includes its logical and physical structure which has been forged by all the strategic and tactical decisions applied during development. The strategic decisions should be made explicitly with the considerations for the trade-off of each alternative. The other purpose of this document is that it serves as the main material for the scheduled architecture review that will take place in the next weeks. The architecture review will allow us to identify what are the weaknesses or strengths of the proposed architecture as well as we hope to obtain a list of suggested changes to improve it. All that well before the system is being realized in code. It is in our interest to identify the possible problems at the architecture design phase of the software project before much of the software is implemented. Strategic decisions must be cross checked caref...

Teaching Creative Thinking through Architectural Design

Science.gov (United States)

Jeon, Kijeong; Cotner, Teresa L.

2010-01-01

Art and art education are open to broader definitions in the twenty-first century. It is time that teachers seriously think about including built environment design in K-12 art education. The term "built environment" includes interior design, architecture, landscape architecture, and urban planning. Due to increased exposure to built environment…

A Low Cost VLSI Architecture for Spike Sorting Based on Feature Extraction with Peak Search

Directory of Open Access Journals (Sweden)

Yuan-Jyun Chang

2016-12-01

Full Text Available The goal of this paper is to present a novel VLSI architecture for spike sorting with high classification accuracy, low area costs and low power consumption. A novel feature extraction algorithm with low computational complexities is proposed for the design of the architecture. In the feature extraction algorithm, a spike is separated into two portions based on its peak value. The area of each portion is then used as a feature. The algorithm is simple to implement and less susceptible to noise interference. Based on the algorithm, a novel architecture capable of identifying peak values and computing spike areas concurrently is proposed. To further accelerate the computation, a spike can be divided into a number of segments for the local feature computation. The local features are subsequently merged with the global ones by a simple hardware circuit. The architecture can also be easily operated in conjunction with the circuits for commonly-used spike detection algorithms, such as the Non-linear Energy Operator (NEO. The architecture has been implemented by an Application-Specific Integrated Circuit (ASIC with 90-nm technology. Comparisons to the existing works show that the proposed architecture is well suited for real-time multi-channel spike detection and feature extraction requiring low hardware area costs, low power consumption and high classification accuracy.

Social topos of church architecture

Directory of Open Access Journals (Sweden)

Zarochintseva Irina

2017-01-01

Full Text Available The article proves the idea that descendants are reminded about the history and culture of their country through the architectural forms of Church architecture. Church architecture expresses the power and greatness of folk feats, patriotism and love of freedom. Each church has its own history, includes the architectural style of its epoch, and occupies a certain position among the other religious buildings. Churches have city-forming significance and represent the sacred center of the city; as well they possess a sign, marking function in the area, which can be “read” as a common landmark in the social topes

Bioinspired Architecture Selection for Multitask Learning

Directory of Open Access Journals (Sweden)

Andrés Bueno-Crespo

2017-06-01

Full Text Available Faced with a new concept to learn, our brain does not work in isolation. It uses all previously learned knowledge. In addition, the brain is able to isolate the knowledge that does not benefit us, and to use what is actually useful. In machine learning, we do not usually benefit from the knowledge of other learned tasks. However, there is a methodology called Multitask Learning (MTL, which is based on the idea that learning a task along with other related tasks produces a transfer of information between them, what can be advantageous for learning the first one. This paper presents a new method to completely design MTL architectures, by including the selection of the most helpful subtasks for the learning of the main task, and the optimal network connections. In this sense, the proposed method realizes a complete design of the MTL schemes. The method is simple and uses the advantages of the Extreme Learning Machine to automatically design a MTL machine, eliminating those factors that hinder, or do not benefit, the learning process of the main task. This architecture is unique and it is obtained without testing/error methodologies that increase the computational complexity. The results obtained over several real problems show the good performances of the designed networks with this method.

Mapping robust parallel multigrid algorithms to scalable memory architectures

Science.gov (United States)

Overman, Andrea; Vanrosendale, John

1993-01-01

The convergence rate of standard multigrid algorithms degenerates on problems with stretched grids or anisotropic operators. The usual cure for this is the use of line or plane relaxation. However, multigrid algorithms based on line and plane relaxation have limited and awkward parallelism and are quite difficult to map effectively to highly parallel architectures. Newer multigrid algorithms that overcome anisotropy through the use of multiple coarse grids rather than relaxation are better suited to massively parallel architectures because they require only simple point-relaxation smoothers. In this paper, we look at the parallel implementation of a V-cycle multiple semicoarsened grid (MSG) algorithm on distributed-memory architectures such as the Intel iPSC/860 and Paragon computers. The MSG algorithms provide two levels of parallelism: parallelism within the relaxation or interpolation on each grid and across the grids on each multigrid level. Both levels of parallelism must be exploited to map these algorithms effectively to parallel architectures. This paper describes a mapping of an MSG algorithm to distributed-memory architectures that demonstrates how both levels of parallelism can be exploited. The result is a robust and effective multigrid algorithm for distributed-memory machines.

Architecture of Brazil 1900-1990

CERN Document Server

Segawa, Hugo

2013-01-01

Architecture of Brazil: 1900-1990 examines the processes that underpin modern Brazilian architecture under various influences and characterizes different understandings of modernity, evident in the chapter topics of this book. Accordingly, the author does not give overall preference to particular architects nor works, with the exception of a few specific works and architects, including Warchavchik, Niemeyer, Lucio Costa, and Vilanova Artigas. In summary, this book: Meticulously examines the controversies, achievements, and failures in constructing spaces, buildings, and cities in a dynamic country Gives a broad view of Brazilian architecture in the twentieth century Proposes a reinterpretation of the varied approaches of the modern movement up to the Second World War Analyzes ideological impacts of important Brazilian architects including Oscar Niemeyer, Lucio Costa and Vilanova Artigas Discusses work of expatriate architects in Brazil Features over 140 illustrations In Architecture of Brazil: 1900-1990, S...

Symmetry in quantum system theory: Rules for quantum architecture design

Energy Technology Data Exchange (ETDEWEB)

Schulte-Herbrueggen, Thomas; Sander, Uwe [Technical University of Munich, Garching (Germany). Dept. Chem.

2010-07-01

We investigate universality in the sense of controllability and observability, of multi-qubit systems in architectures of various symmetries of coupling type and topology. By determining the respective dynamic system Lie algebras, explicit reachability sets under symmetry constraints are provided. Thus for a given (possibly symmetric) experimental coupling architecture several decision problems can be solved in a unified way: (i) can a target Hamiltonian be simulated? (ii) can a target gate be synthesised? (iii) to which extent is the system observable by a given set of detection operators? and, as a special case of the latter, (iv) can an underlying system Hamiltonian be identified with a given set of detection operators? Finally, in turn, the absence of symmetry provides a convenient necessary condition for full controllability. Though often easier to assess than the well-established Lie-algebra rank condition, this is not sufficient unless the candidate dynamic simple Lie algebra can be pre-identified uniquely. Thus for architectures with various Ising and Heisenberg coupling types we give design rules sufficient to ensure full controllability. In view of follow-up studies, we relate the unification of necessary and sufficient conditions for universality to filtering simple Lie subalgebras of su(N) comprising classical and exceptional types.

The Simulation Intranet Architecture

Energy Technology Data Exchange (ETDEWEB)

Holmes, V.P.; Linebarger, J.M.; Miller, D.J.; Vandewart, R.L.

1998-12-02

The Simdarion Infranet (S1) is a term which is being used to dcscribc one element of a multidisciplinary distributed and distance computing initiative known as DisCom2 at Sandia National Laboratory (http ct al. 1998). The Simulation Intranet is an architecture for satisfying Sandia's long term goal of providing an end- to-end set of scrviccs for high fidelity full physics simu- lations in a high performance, distributed, and distance computing environment. The Intranet Architecture group was formed to apply current distributed object technologies to this problcm. For the hardware architec- tures and software models involved with the current simulation process, a CORBA-based architecture is best suited to meet Sandia's needs. This paper presents the initial desi-a and implementation of this Intranct based on a three-tier Network Computing Architecture(NCA). The major parts of the architecture include: the Web Cli- ent, the Business Objects, and Data Persistence.

Travels in Architectural History

Directory of Open Access Journals (Sweden)

Davide Deriu

2016-11-01

Full Text Available Travel is a powerful force in shaping the perception of the modern world and plays an ever-growing role within architectural and urban cultures. Inextricably linked to political and ideological issues, travel redefines places and landscapes through new transport infrastructures and buildings. Architecture, in turn, is reconstructed through visual and textual narratives produced by scores of modern travellers — including writers and artists along with architects themselves. In the age of the camera, travel is bound up with new kinds of imaginaries; private records and recollections often mingle with official, stereotyped views, as the value of architectural heritage increasingly rests on the mechanical reproduction of its images. Whilst students often learn about architectural history through image collections, the place of the journey in the formation of the architect itself shifts. No longer a lone and passionate antiquarian or an itinerant designer, the modern architect eagerly hops on buses, trains, and planes in pursuit of personal as well as professional interests. Increasingly built on a presumption of mobility, architectural culture integrates travel into cultural debates and design experiments. By addressing such issues from a variety of perspectives, this collection, a special 'Architectural Histories' issue on travel, prompts us to rethink the mobile conditions in which architecture has historically been produced and received.

Future city architecture for optimal living

CERN Document Server

Pardalos, Panos

2015-01-01

  This book offers a wealth of interdisciplinary approaches to urbanization strategies in architecture centered on growing concerns about the future of cities and their impacts on essential elements of architectural optimization, livability, energy consumption and sustainability. It portrays the urban condition in architectural terms, as well as the living condition in human terms, both of which can be optimized by mathematical modeling as well as mathematical calculation and assessment.   Special features include:   ·        new research on the construction of future cities and smart cities   ·        discussions of sustainability and new technologies designed to advance ideas to future city developments   Graduate students and researchers in architecture, engineering, mathematical modeling, and building physics will be engaged by the contributions written by eminent international experts from a variety of disciplines including architecture, engineering, modeling, optimization, and relat...

Artificial cognition architectures

CERN Document Server

Crowder, James A; Friess, Shelli A

2013-01-01

The goal of this book is to establish the foundation, principles, theory, and concepts that are the backbone of real, autonomous Artificial Intelligence. Presented here are some basic human intelligence concepts framed for Artificial Intelligence systems. These include concepts like Metacognition and Metamemory, along with architectural constructs for Artificial Intelligence versions of human brain functions like the prefrontal cortex. Also presented are possible hardware and software architectures that lend themselves to learning, reasoning, and self-evolution

Switch/router architectures shared-bus and shared-memory based systems

CERN Document Server

Aweya, James

2018-01-01

A practicing engineer's inclusive review of communication systems based on shared-bus and shared-memory switch/router architectures. This book delves into the inner workings of router and switch design in a comprehensive manner that is accessible to a broad audience. It begins by describing the role of switch/routers in a network, then moves on to the functional composition of a switch/router. A comparison of centralized versus distributed design of the architecture is also presented. The author discusses use of bus versus shared-memory for communication within a design, and also covers Quality of Service (QoS) mechanisms and configuration tools. Written in a simple style and language to allow readers to easily understand and appreciate the material presented, Switch/Router Architectures: Shared-Bus and Shared-Memory Based Systems discusses the design of multilayer switches—starting with the basic concepts and on to the basic architectures. It describes the evolution of multilayer switch designs and highli...

Simple machines

CERN Document Server

Graybill, George

2007-01-01

Just how simple are simple machines? With our ready-to-use resource, they are simple to teach and easy to learn! Chocked full of information and activities, we begin with a look at force, motion and work, and examples of simple machines in daily life are given. With this background, we move on to different kinds of simple machines including: Levers, Inclined Planes, Wedges, Screws, Pulleys, and Wheels and Axles. An exploration of some compound machines follows, such as the can opener. Our resource is a real time-saver as all the reading passages, student activities are provided. Presented in s

Database architecture evolution: Mammals flourished long before dinosaurs became extinct

NARCIS (Netherlands)

S. Manegold (Stefan); M.L. Kersten (Martin); P.A. Boncz (Peter)

2009-01-01

textabstractThe holy grail for database architecture research is to find a solution that is Scalable & Speedy, to run on anything from small ARM processors up to globally distributed compute clusters, Stable & Secure, to service a broad user community, Small & Simple, to be comprehensible to a small

Architectural slicing

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2013-01-01

Architectural prototyping is a widely used practice, con- cerned with taking architectural decisions through experiments with light- weight implementations. However, many architectural decisions are only taken when systems are already (partially) implemented. This is prob- lematic in the context...... of architectural prototyping since experiments with full systems are complex and expensive and thus architectural learn- ing is hindered. In this paper, we propose a novel technique for harvest- ing architectural prototypes from existing systems, \\architectural slic- ing", based on dynamic program slicing. Given...... a system and a slicing criterion, architectural slicing produces an architectural prototype that contain the elements in the architecture that are dependent on the ele- ments in the slicing criterion. Furthermore, we present an initial design and implementation of an architectural slicer for Java....

Search for design intelligence: A field study on the role of emotional intelligence in architectural design studios

OpenAIRE

Nazidizaji, Sajjad; Tomé, Ana; Regateiro, Francisco

2017-01-01

The design studio is the core of the architecture curriculum. Interpersonal interactions have a key role during the processes of design and critique. The influence of emotional intelligence (EQ) on interpersonal communication skills has been widely proven. This study examines the correlation between EQ and architectural design competence. To achieve this, 78 architecture students were selected via a simple random sampling method and tested using an EQ test questionnaire developed by Bradbury ...

The application of vernacular Australian environmental design principles in Glenn Murcutt’s architecture

OpenAIRE

Lecaro, Mauricio; Lau, Benson; Rodrigues, Lucelia; Jarman, Dik

2017-01-01

Glenn Murcutt is recognised as one of the most influential architects of the last few decades. His design philosophy, environmental awareness and in-depth understanding of the Australian context and vernacular architecture, have made him one of the leaders of critical regionalism worldwide. His buildings not only provide shelter, but also offer comfort with lower environmental impacts through simple, yet creative design solutions. Although Murcutt’s architecture is well documented, limited ev...

SUSTAINABLE ARCHITECTURE : WHAT ARCHITECTURE STUDENTS THINK

OpenAIRE

SATWIKO, PRASASTO

2013-01-01

Sustainable architecture has become a hot issue lately as the impacts of climate change become more intense. Architecture educations have responded by integrating knowledge of sustainable design in their curriculum. However, in the real life, new buildings keep coming with designs that completely ignore sustainable principles. This paper discusses the results of two national competitions on sustainable architecture targeted for architecture students (conducted in 2012 and 2013). The results a...

Simple substrates for complex cognition

Directory of Open Access Journals (Sweden)

Peter Dayan

2008-12-01

Full Text Available Complex cognitive tasks present a range of computational and algorithmic challenges for neural accounts of both learning and inference. In particular, it is extremely hard to solve them using the sort of simple policies that have been extensively studied as solutions to elementary Markov decision problems. There has thus been recent interest in architectures for the instantiation and even learning of policies that are formally more complicated than these, involving operations such as gated working memory. However, the focus of these ideas and methods has largely been on what might best be considered as automatized, routine or, in the sense of animal conditioning, habitual, performance. Thus, they have yet to provide a route towards understanding the workings of rule-based control, which is critical for cognitively sophisticated competence. Here, we review a recent suggestion for a uniform architecture for habitual and rule-based execution, discuss some of the habitual mechanisms that underpin the use of rules, and consider a statistical relationship between rules and habits.

Noncontextuality with Marginal Selectivity in Reconstructing Mental Architectures

Directory of Open Access Journals (Sweden)

Ru eZhang

2015-06-01

Full Text Available We present a general theory of series-parallel mental architectures with selectively influenced stochastically non-independent components. A mental architecture is a hypothetical network of processes aimed at performing a task, of which we only observe the overall time it takes under variable parameters of the task. It is usually assumed that the network contains several processes selectively influenced by different experimental factors, and then the question is asked as to how these processes are arranged within the network, e.g., whether they are concurrent or sequential. One way of doing this is to consider the distribution functions for the overall processing time and compute certain linear combinations thereof (interaction contrasts. The theory of selective influences in psychology can be viewed as a special application of the interdisciplinary theory of (noncontextuality having its origins and main applications in quantum theory. In particular, lack of contextuality is equivalent to the existence of a hidden random entity of which all the random variables in play are functions. Consequently, for any given value of this common random entity, the processing times and their compositions (minima, maxima, or sums become deterministic quantities. These quantities, in turn, can be treated as random variables with (shifted Heaviside distribution functions, for which one can easily compute various linear combinations across different treatments, including interaction contrasts. This mathematical fact leads to a simple method, more general than the previously used ones, to investigate and characterize the interaction contrast for different types of series-parallel architectures.

Architecture

OpenAIRE

Clear, Nic

2014-01-01

When discussing science fiction’s relationship with architecture, the usual practice is to look at the architecture “in” science fiction—in particular, the architecture in SF films (see Kuhn 75-143) since the spaces of literary SF present obvious difficulties as they have to be imagined. In this essay, that relationship will be reversed: I will instead discuss science fiction “in” architecture, mapping out a number of architectural movements and projects that can be viewed explicitly as scien...

Marshall Application Realignment System (MARS) Architecture

Science.gov (United States)

Belshe, Andrea; Sutton, Mandy

2010-01-01

The Marshall Application Realignment System (MARS) Architecture project was established to meet the certification requirements of the Department of Defense Architecture Framework (DoDAF) V2.0 Federal Enterprise Architecture Certification (FEAC) Institute program and to provide added value to the Marshall Space Flight Center (MSFC) Application Portfolio Management process. The MARS Architecture aims to: (1) address the NASA MSFC Chief Information Officer (CIO) strategic initiative to improve Application Portfolio Management (APM) by optimizing investments and improving portfolio performance, and (2) develop a decision-aiding capability by which applications registered within the MSFC application portfolio can be analyzed and considered for retirement or decommission. The MARS Architecture describes a to-be target capability that supports application portfolio analysis against scoring measures (based on value) and overall portfolio performance objectives (based on enterprise needs and policies). This scoring and decision-aiding capability supports the process by which MSFC application investments are realigned or retired from the application portfolio. The MARS Architecture is a multi-phase effort to: (1) conduct strategic architecture planning and knowledge development based on the DoDAF V2.0 six-step methodology, (2) describe one architecture through multiple viewpoints, (3) conduct portfolio analyses based on a defined operational concept, and (4) enable a new capability to support the MSFC enterprise IT management mission, vision, and goals. This report documents Phase 1 (Strategy and Design), which includes discovery, planning, and development of initial architecture viewpoints. Phase 2 will move forward the process of building the architecture, widening the scope to include application realignment (in addition to application retirement), and validating the underlying architecture logic before moving into Phase 3. The MARS Architecture key stakeholders are most

The signs of life in architecture.

Science.gov (United States)

Gruber, Petra

2008-06-01

Engineers, designers and architects often look to nature for inspiration. The research on 'natural constructions' is aiming at innovation and the improvement of architectural quality. The introduction of life sciences terminology in the context of architecture delivers new perspectives towards innovation in architecture and design. The investigation is focused on the analogies between nature and architecture. Apart from other principles that are found in living nature, an interpretation of the so-called 'signs of life', which characterize living systems, in architecture is presented. Selected architectural projects that have applied specific characteristics of life, whether on purpose or not, will show the state of development in this field and open up future challenges. The survey will include famous built architecture as well as students' design programs, which were carried out under supervision of the author at the Department of Design and Building Construction at the Vienna University of Technology.

Instruments to Evaluate and Improve IT Architecture Work

NARCIS (Netherlands)

Pruijt, L.

2015-01-01

IT Architecture work is demanding and includes, inter alia, identifying architectural significant requirements, designing and selecting solutions for these requirements, and ensuring that the solutions are implemented according to the architectural design. The research presented here, contributes to

The Timelessness Quality In Architecture

Directory of Open Access Journals (Sweden)

Sally Essawy

2017-02-01

Full Text Available This paper explores the process of defining an aesthetic philosophy and criteria of Timeless architecture and using it to enhance building effect on users. An argument is made for the justification of the concepts manifested for a timeless architectural aesthetic over the continuation of the current paradigm. The various factors that influence the development of a timeless aesthetic are also discussed including architectural concept varying style references and the moral and social obligation that timelessness represents. By the end principles of a timeless aesthetic architecture are established that timelessness represents a practical philosophy that timelessness serves as the concept generator in the design process and that timeless architecture is universally specific to the constraints of its concepts and style. Two case studies are also examined in relation to these principles as well as more qualitative and quantitative evaluation factors.

Computer architecture a quantitative approach

CERN Document Server

Hennessy, John L

2019-01-01

Computer Architecture: A Quantitative Approach, Sixth Edition has been considered essential reading by instructors, students and practitioners of computer design for over 20 years. The sixth edition of this classic textbook is fully revised with the latest developments in processor and system architecture. It now features examples from the RISC-V (RISC Five) instruction set architecture, a modern RISC instruction set developed and designed to be a free and openly adoptable standard. It also includes a new chapter on domain-specific architectures and an updated chapter on warehouse-scale computing that features the first public information on Google's newest WSC. True to its original mission of demystifying computer architecture, this edition continues the longstanding tradition of focusing on areas where the most exciting computing innovation is happening, while always keeping an emphasis on good engineering design.

Photonic Architecture for Scalable Quantum Information Processing in Diamond

Directory of Open Access Journals (Sweden)

Kae Nemoto

2014-08-01

Full Text Available Physics and information are intimately connected, and the ultimate information processing devices will be those that harness the principles of quantum mechanics. Many physical systems have been identified as candidates for quantum information processing, but none of them are immune from errors. The challenge remains to find a path from the experiments of today to a reliable and scalable quantum computer. Here, we develop an architecture based on a simple module comprising an optical cavity containing a single negatively charged nitrogen vacancy center in diamond. Modules are connected by photons propagating in a fiber-optical network and collectively used to generate a topological cluster state, a robust substrate for quantum information processing. In principle, all processes in the architecture can be deterministic, but current limitations lead to processes that are probabilistic but heralded. We find that the architecture enables large-scale quantum information processing with existing technology.

Creating 3D Hierarchical Carbon Architectures with Micro-, Meso-, and Macropores via a Simple Self-Blowing Strategy for a Flow-through Deionization Capacitor.

Science.gov (United States)

Zhao, Shanshan; Yan, Tingting; Wang, Hui; Zhang, Jianping; Shi, Liyi; Zhang, Dengsong

2016-07-20

In this work, 3D hierarchical carbon architectures (3DHCAs) with micro-, meso-, and macropores were prepared via a simple self-blowing strategy as highly efficient electrodes for a flow-through deionization capacitor (FTDC). The obtained 3DHCAs have a hierarchically porous structure, large accessible specific surface area (2061 m(2) g(-1)), and good wettability. The electrochemical tests show that the 3DHCA electrode has a high specific capacitance and good electric conductivity. The deionization experiments demonstrate that the 3DHCA electrodes possess a high deionization capacity of 17.83 mg g(-1) in a 500 mg L(-1) NaCl solution at 1.2 V. Moreover, the 3DHCA electrodes present a fast deionization rate in 100-500 mg L(-1) NaCl solutions at 0.8-1.4 V. The 3DHCA electrodes also present a good regeneration behavior in the reiterative regeneration test. These above factors render the 3DHCAs a promising FTDC electrode material.

Modeling Architectural Patterns Using Architectural Primitives

NARCIS (Netherlands)

Zdun, Uwe; Avgeriou, Paris

2005-01-01

Architectural patterns are a key point in architectural documentation. Regrettably, there is poor support for modeling architectural patterns, because the pattern elements are not directly matched by elements in modeling languages, and, at the same time, patterns support an inherent variability that

A technique system for the measurement, reconstruction and character extraction of rice plant architecture.

Directory of Open Access Journals (Sweden)

Xumeng Li

Full Text Available This study developed a technique system for the measurement, reconstruction, and trait extraction of rice canopy architectures, which have challenged functional-structural plant modeling for decades and have become the foundation of the design of ideo-plant architectures. The system uses the location-separation-measurement method (LSMM for the collection of data on the canopy architecture and the analytic geometry method for the reconstruction and visualization of the three-dimensional (3D digital architecture of the rice plant. It also uses the virtual clipping method for extracting the key traits of the canopy architecture such as the leaf area, inclination, and azimuth distribution in spatial coordinates. To establish the technique system, we developed (i simple tools to measure the spatial position of the stem axis and azimuth of the leaf midrib and to capture images of tillers and leaves; (ii computer software programs for extracting data on stem diameter, leaf nodes, and leaf midrib curves from the tiller images and data on leaf length, width, and shape from the leaf images; (iii a database of digital architectures that stores the measured data and facilitates the reconstruction of the 3D visual architecture and the extraction of architectural traits; and (iv computation algorithms for virtual clipping to stratify the rice canopy, to extend the stratified surface from the horizontal plane to a general curved surface (including a cylindrical surface, and to implement in silico. Each component of the technique system was quantitatively validated and visually compared to images, and the sensitivity of the virtual clipping algorithms was analyzed. This technique is inexpensive and accurate and provides high throughput for the measurement, reconstruction, and trait extraction of rice canopy architectures. The technique provides a more practical method of data collection to serve functional-structural plant models of rice and for the

Religious Architecture : Anthropological Perspectives

OpenAIRE

2013-01-01

Religious Architecture: Anthropological Perspectives develops an anthropological perspective on modern religious architecture, including mosques, churches and synagogues. Borrowing from a range of theoretical perspectives on space-making and material religion, this volume looks at how religious buildings take their place in opposition to the secular surroundings, how they, as evocations of the sublime, help believers to move beyond the boundaries of modern subjectivity, and how they, in their...

Performative Architecture and Urban Spaces

DEFF Research Database (Denmark)

Kiib, Hans

2008-01-01

  3 Workshops one exibition   Three conceptual architectural workshops took take place in parallel from August 16th - 22nd 2008. Each workshop carried a specific methodology and the goal is to come up with conceptual proposals that could be further developed for selected sites in the city of Aalb...... This workshop focus on temporary architecture and urban catalysts. Informal spaces and the interface between the built and the void are foremost in the development of performative urban environments and cultural interaction. ......  3 Workshops one exibition   Three conceptual architectural workshops took take place in parallel from August 16th - 22nd 2008. Each workshop carried a specific methodology and the goal is to come up with conceptual proposals that could be further developed for selected sites in the city...... The workshop model includes an open workshop where a handful of international architects are invited to spend five days with local architects, engineers and scholars contributing to a work of architectural vision and quality. The workshop includes presentations and discussions and development of projects...

Effects of different petal thickness on gas sensing properties of flower-like WO3·H2O hierarchical architectures

International Nuclear Information System (INIS)

Zeng, Wen; Zhang, He; Wang, Zhongchang

2015-01-01

Graphical abstract: In this work, we prepare four different petal thicknesses of hierarchical WO 3 ·H 2 O architectures via a simple hydrothermal process, and systematically report their formation mechanisms and gas-sensing properties. - Highlights: • Flower-like WO 3 ·H 2 O architectures with different petal thickness were reported. • The WO 3 ·H 2 O sheet-flower sensor shows a significantly enhanced gas response. • A possible growth mechanism for the flower-like architectures is proposed. - Abstract: Hierarchical architectures consisting of two-dimensional (2D) nanostructures are of great interest for potential use in recent year. Here, we report the successful synthesis of four hierarchical tungsten oxide flower-like architectures via a simple yet facile hydrothermal method. The as-prepared WO 3 ·H 2 O hierarchical architectures are in fact assembled with numerous nanosheets or nanoplates. Through a comprehensive characterization of microstructures and morphologies of the as-prepared products, we find that petal thickness is a key factor for affecting gas-sensing performances. We further propose a possible growth mechanism for the four flower-like architectures. Moreover, gas-sensing measurements showed that the well-defined sheet-flower WO 3 ·H 2 O hierarchical architectures exhibited the excellent gas-sensing properties to ethanol owing to their largest amount of thin petal structures and pores

DSP Architecture Design Essentials

CERN Document Server

Marković, Dejan

2012-01-01

In DSP Architecture Design Essentials, authors Dejan Marković and Robert W. Brodersen cover a key subject for the successful realization of DSP algorithms for communications, multimedia, and healthcare applications. The book addresses the need for DSP architecture design that maps advanced DSP algorithms to hardware in the most power- and area-efficient way. The key feature of this text is a design methodology based on a high-level design model that leads to hardware implementation with minimum power and area. The methodology includes algorithm-level considerations such as automated word-length reduction and intrinsic data properties that can be leveraged to reduce hardware complexity. From a high-level data-flow graph model, an architecture exploration methodology based on linear programming is used to create an array of architectural solutions tailored to the underlying hardware technology. The book is supplemented with online material: bibliography, design examples, CAD tutorials and custom software.

Computer programming and architecture the VAX

CERN Document Server

Levy, Henry

2014-01-01

Takes a unique systems approach to programming and architecture of the VAXUsing the VAX as a detailed example, the first half of this book offers a complete course in assembly language programming. The second describes higher-level systems issues in computer architecture. Highlights include the VAX assembler and debugger, other modern architectures such as RISCs, multiprocessing and parallel computing, microprogramming, caches and translation buffers, and an appendix on the Berkeley UNIX assembler.

Tank waste remediation system architecture tree

International Nuclear Information System (INIS)

PECK, L.G.

1999-01-01

The TWRS Architecture Tree presented in this document is a hierarchical breakdown to support the TWRS systems engineering analysis of the TWRS physical system, including facilities, hardware and software. The purpose for this systems engineering architecture tree is to describe and communicate the system's selected and existing architecture, to provide a common structure to improve the integration of work and resulting products, and to provide a framework as a basis for TWRS Specification Tree development

Protein Kinases in Shaping Plant Architecture.

Science.gov (United States)

Wu, Juan; Wang, Bo; Xin, Xiaoyun; Ren, Dongtao

2018-02-13

Plant architecture, the three-dimensional organization of the plant body, includes the branching pattern and the size, shape, and position of organs. Plant architecture is genetically controlled and is influenced by environmental conditions. The regulations occur at most of the stages from the first division of the fertilized eggs to the final establishment of plant architecture. Among the various endogenous regulators, protein kinases and their associated signaling pathways have been shown to play important roles in regulating the process of plant architecture establishment. In this review, we summarize recent progress in the understanding of the mechanisms by which plant architecture formation is regulated by protein kinases, especially mitogen-activated protein kinase (MAPK). Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

A Systems Engineering Approach to Architecture Development

Science.gov (United States)

Di Pietro, David A.

2015-01-01

Architecture development is often conducted prior to system concept design when there is a need to determine the best-value mix of systems that works collectively in specific scenarios and time frames to accomplish a set of mission area objectives. While multiple architecture frameworks exist, they often require use of unique taxonomies and data structures. In contrast, this paper characterizes architecture development using terminology widely understood within the systems engineering community. Using a notional civil space architecture example, it employs a multi-tier framework to describe the enterprise level architecture and illustrates how results of lower tier, mission area architectures integrate into the enterprise architecture. It also presents practices for conducting effective mission area architecture studies, including establishing the trade space, developing functions and metrics, evaluating the ability of potential design solutions to meet the required functions, and expediting study execution through the use of iterative design cycles

Comparison of different artificial neural network architectures in modeling of Chlorella sp. flocculation.

Science.gov (United States)

Zenooz, Alireza Moosavi; Ashtiani, Farzin Zokaee; Ranjbar, Reza; Nikbakht, Fatemeh; Bolouri, Oberon

2017-07-03

Biodiesel production from microalgae feedstock should be performed after growth and harvesting of the cells, and the most feasible method for harvesting and dewatering of microalgae is flocculation. Flocculation modeling can be used for evaluation and prediction of its performance under different affective parameters. However, the modeling of flocculation in microalgae is not simple and has not performed yet, under all experimental conditions, mostly due to different behaviors of microalgae cells during the process under different flocculation conditions. In the current study, the modeling of microalgae flocculation is studied with different neural network architectures. Microalgae species, Chlorella sp., was flocculated with ferric chloride under different conditions and then the experimental data modeled using artificial neural network. Neural network architectures of multilayer perceptron (MLP) and radial basis function architectures, failed to predict the targets successfully, though, modeling was effective with ensemble architecture of MLP networks. Comparison between the performances of the ensemble and each individual network explains the ability of the ensemble architecture in microalgae flocculation modeling.

Passion fruit-like nano-architectures: a general synthesis route

Science.gov (United States)

Cassano, D.; David, J.; Luin, S.; Voliani, V.

2017-03-01

Noble metal nanostructures have demonstrated a number of intriguing features for both medicine and catalysis. However, accumulation issues have prevented their clinical translation, while their use in catalysis has shown serious efficiency and stability hurdles. Here we introduce a simple and robust synthetic protocol for passion fruit-like nano-architectures composed by a silica shell embedding polymeric arrays of ultrasmall noble metal nanoparticles. These nano-architectures show interesting features for both oncology and catalysis. They avoid the issue of persistence in organism thanks to their fast biodegradation in renal clearable building blocks. Furthermore, their calcination results in yolk-shell structures composed by naked metal or alloy nanospheres shielded from aggregation by a silica shell.

A polyamidoamine dendrimer-streptavidin supramolecular architecture for biosensor development.

Science.gov (United States)

Soda, N; Arotiba, O A

2017-12-01

A novel polyamidoamine dendrimer-streptavidin supramolecular architecture suitable as a versatile platform for biosensor development is reported. The dendrimer was electrodeposited on a glassy carbon electrode via cyclic voltammetry. The dendrimer electrode was further modified with streptavidin by electrostatic attraction upon drop coating. The platform i.e. the dendrimer-streptavidin modified electrode was electrochemically interrogated in phosphate buffer, ferrocyanide and H 2 O 2 . The dendrimer-streptavidin platform was used in the preparation of a simple DNA biosensor as a proof of concept. The supramolecular architecture of dendrimer-streptavidin was stable, electroactive and thus lends itself as a versatile immobilisation layer for any biotinylated bioreceptors in biosensor development. Copyright © 2017 Elsevier B.V. All rights reserved.

Real-Time 3D Face Acquisition Using Reconfigurable Hybrid Architecture

Directory of Open Access Journals (Sweden)

Mitéran Johel

2007-01-01

Full Text Available Acquiring 3D data of human face is a general problem which can be applied in face recognition, virtual reality, and many other applications. It can be solved using stereovision. This technique consists in acquiring data in three dimensions from two cameras. The aim is to implement an algorithmic chain which makes it possible to obtain a three-dimensional space from two two-dimensional spaces: two images coming from the two cameras. Several implementations have already been considered. We propose a new simple real-time implementation based on a hybrid architecture (FPGA-DSP, allowing to consider an embedded and reconfigurable processing. Then we show our method which provides depth map of face, dense and reliable, and which can be implemented on an embedded architecture. A various architecture study led us to a judicious choice allowing to obtain the desired result. The real-time data processing is implemented in an embedded architecture. We obtain a dense face disparity map, precise enough for considered applications (multimedia, virtual worlds, biometrics and using a reliable method.

Bio-inspired adaptive feedback error learning architecture for motor control.

Science.gov (United States)

Tolu, Silvia; Vanegas, Mauricio; Luque, Niceto R; Garrido, Jesús A; Ros, Eduardo

2012-10-01

This study proposes an adaptive control architecture based on an accurate regression method called Locally Weighted Projection Regression (LWPR) and on a bio-inspired module, such as a cerebellar-like engine. This hybrid architecture takes full advantage of the machine learning module (LWPR kernel) to abstract an optimized representation of the sensorimotor space while the cerebellar component integrates this to generate corrective terms in the framework of a control task. Furthermore, we illustrate how the use of a simple adaptive error feedback term allows to use the proposed architecture even in the absence of an accurate analytic reference model. The presented approach achieves an accurate control with low gain corrective terms (for compliant control schemes). We evaluate the contribution of the different components of the proposed scheme comparing the obtained performance with alternative approaches. Then, we show that the presented architecture can be used for accurate manipulation of different objects when their physical properties are not directly known by the controller. We evaluate how the scheme scales for simulated plants of high Degrees of Freedom (7-DOFs).

A Bayesian Approach to Model Selection in Hierarchical Mixtures-of-Experts Architectures.

Science.gov (United States)

Tanner, Martin A.; Peng, Fengchun; Jacobs, Robert A.

1997-03-01

There does not exist a statistical model that shows good performance on all tasks. Consequently, the model selection problem is unavoidable; investigators must decide which model is best at summarizing the data for each task of interest. This article presents an approach to the model selection problem in hierarchical mixtures-of-experts architectures. These architectures combine aspects of generalized linear models with those of finite mixture models in order to perform tasks via a recursive "divide-and-conquer" strategy. Markov chain Monte Carlo methodology is used to estimate the distribution of the architectures' parameters. One part of our approach to model selection attempts to estimate the worth of each component of an architecture so that relatively unused components can be pruned from the architecture's structure. A second part of this approach uses a Bayesian hypothesis testing procedure in order to differentiate inputs that carry useful information from nuisance inputs. Simulation results suggest that the approach presented here adheres to the dictum of Occam's razor; simple architectures that are adequate for summarizing the data are favored over more complex structures. Copyright 1997 Elsevier Science Ltd. All Rights Reserved.

Separating VNF and Network Control for Hardware‐Acceleration of SDN/NFV Architecture

Directory of Open Access Journals (Sweden)

Tong Duan

2017-08-01

Full Text Available A hardware‐acceleration architecture that separates virtual network functions (VNFs and network control (called HSN is proposed to solve the mismatch between the simple flow steering requirements and strong packet processing abilities of software‐defined networking (SDN forwarding elements (FEs in SDN/network function virtualization (NFV architecture, while improving the efficiency of NFV infrastructure and the performance of network‐intensive functions. HSN makes full use of FEs and accelerates VNFs through two mechanisms: (1 separation of traffic steering and packet processing in the FEs; (2 separation of SDN and NFV control in the FEs. Our HSN prototype, built on NetFPGA‐10G, demonstrates that the processing performance can be greatly improved with only a small modification of the traditional SDN/NFV architecture.

Optical linear algebra processors - Architectures and algorithms

Science.gov (United States)

Casasent, David

1986-01-01

Attention is given to the component design and optical configuration features of a generic optical linear algebra processor (OLAP) architecture, as well as the large number of OLAP architectures, number representations, algorithms and applications encountered in current literature. Number-representation issues associated with bipolar and complex-valued data representations, high-accuracy (including floating point) performance, and the base or radix to be employed, are discussed, together with case studies on a space-integrating frequency-multiplexed architecture and a hybrid space-integrating and time-integrating multichannel architecture.

Migration of vectorized iterative solvers to distributed memory architectures

Energy Technology Data Exchange (ETDEWEB)

Pommerell, C. [AT& T Bell Labs., Murray Hill, NJ (United States); Ruehl, R. [CSCS-ETH, Manno (Switzerland)

1994-12-31

Both necessity and opportunity motivate the use of high-performance computers for iterative linear solvers. Necessity results from the size of the problems being solved-smaller problems are often better handled by direct methods. Opportunity arises from the formulation of the iterative methods in terms of simple linear algebra operations, even if this {open_quote}natural{close_quotes} parallelism is not easy to exploit in irregularly structured sparse matrices and with good preconditioners. As a result, high-performance implementations of iterative solvers have attracted a lot of interest in recent years. Most efforts are geared to vectorize or parallelize the dominating operation-structured or unstructured sparse matrix-vector multiplication, or to increase locality and parallelism by reformulating the algorithm-reducing global synchronization in inner products or local data exchange in preconditioners. Target architectures for iterative solvers currently include mostly vector supercomputers and architectures with one or few optimized (e.g., super-scalar and/or super-pipelined RISC) processors and hierarchical memory systems. More recently, parallel computers with physically distributed memory and a better price/performance ratio have been offered by vendors as a very interesting alternative to vector supercomputers. However, programming comfort on such distributed memory parallel processors (DMPPs) still lags behind. Here the authors are concerned with iterative solvers and their changing computing environment. In particular, they are considering migration from traditional vector supercomputers to DMPPs. Application requirements force one to use flexible and portable libraries. They want to extend the portability of iterative solvers rather than reimplementing everything for each new machine, or even for each new architecture.

Data architecture from zen to reality

CERN Document Server

Tupper, Charles D

2011-01-01

Data Architecture: From Zen to Reality explains the principles underlying data architecture, how data evolves with organizations, and the challenges organizations face in structuring and managing their data. It also discusses proven methods and technologies to solve the complex issues dealing with data. The book uses a holistic approach to the field of data architecture by covering the various applied areas of data, including data modelling and data model management, data quality , data governance, enterprise information management, database design, data warehousing, and warehouse design. This book is a core resource for anyone emplacing, customizing or aligning data management systems, taking the Zen-like idea of data architecture to an attainable reality.

An Evaluation of ADLs on Modeling Patterns for Software Architecture

NARCIS (Netherlands)

Waqas Kamal, Ahmad; Avgeriou, Paris

2007-01-01

Architecture patterns provide solutions to recurring design problems at the architecture level. In order to model patterns during software architecture design, one may use a number of existing Architecture Description Languages (ADLs), including the UML, a generic language but also a de facto

Architectural prototyping

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

2004-01-01

A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

Persian architecture and mathematics

CERN Document Server

2012-01-01

This volulme features eight original papers dedicated to the theme “Persian Architecture and Mathematics,” guest edited by Reza Sarhangi. All papers were approved through a rigorous process of blind peer review and edited by an interdisciplinary scientific editorial committee. Topics range from symmetry in ancient Persian architecture to the elaborate geometric patterns and complex three-dimensional structures of standing monuments of historical periods, from the expression of mathematical ideas to architectonic structures, and from decorative ornament to the representation of modern group theory and quasi-crystalline patterns. The articles discuss unique monuments Persia, including domed structures and two-dimensional patterns, which have received significant scholarly attention in recent years. This book is a unique contribution to studies of Persian architecture in relation to mathematics.

Architectural communication: Intra and extra activity of architecture

Directory of Open Access Journals (Sweden)

Stamatović-Vučković Slavica

2013-01-01

Full Text Available Apart from a brief overview of architectural communication viewed from the standpoint of theory of information and semiotics, this paper contains two forms of dualistically viewed architectural communication. The duality denotation/connotation (”primary” and ”secondary” architectural communication is one of semiotic postulates taken from Umberto Eco who viewed architectural communication as a semiotic phenomenon. In addition, architectural communication can be viewed as an intra and an extra activity of architecture where the overall activity of the edifice performed through its spatial manifestation may be understood as an act of communication. In that respect, the activity may be perceived as the ”behavior of architecture”, which corresponds to Lefebvre’s production of space.

Archibabel: Tracing the Writing Architecture Project in Architectural Education

Science.gov (United States)

Lappin, Sarah A.; Erk, Gül Kaçmaz; Martire, Agustina

2015-01-01

Though much recent scholarship has investigated the potential of writing in creative practice (including visual arts, drama, even choreography), there are few models in the literature which discuss writing in the context of architectural education. This article aims to address this dearth of pedagogical research, analysing the cross-disciplinary…

Architectural freedom and industrialized architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... proportions, to organize the process on site choosing either one room wall components or several rooms wall components – either horizontally or vertically. Combined with the seamless joint the playing with these possibilities the new industrialized architecture can deliver variations in choice of solutions...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....

Architectural freedom and industrialized architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... expression in the specific housing area. It is the aim of this article to expand the different design strategies which architects can use – to give the individual project attitudes and designs with architectural quality. Through the customized component production it is possible to choose different...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....

An Integrated Hybrid Transportation Architecture for Human Mars Expeditions

Science.gov (United States)

Merrill, Raymond G.; Chai, Patrick R.; Qu, Min

2015-01-01

NASA's Human Spaceflight Architecture Team is developing a reusable hybrid transportation architecture that uses both chemical and electric propulsion systems on the same vehicle to send crew and cargo to Mars destinations such as Phobos, Deimos, the surface of Mars, and other orbits around Mars. By applying chemical and electrical propulsion where each is most effective, the hybrid architecture enables a series of Mars trajectories that are more fuel-efficient than an all chemical architecture without significant increases in flight times. This paper presents an integrated Hybrid in-space transportation architecture for piloted missions and delivery of cargo. A concept for a Mars campaign including orbital and Mars surface missions is described in detail including a system concept of operations and conceptual design. Specific constraints, margin, and pinch points are identified for the architecture and opportunities for critical path commercial and international collaboration are discussed.

TAD-free analysis of architectural proteins and insulators.

Science.gov (United States)

Mourad, Raphaël; Cuvier, Olivier

2018-03-16

The three-dimensional (3D) organization of the genome is intimately related to numerous key biological functions including gene expression and DNA replication regulations. The mechanisms by which molecular drivers functionally organize the 3D genome, such as topologically associating domains (TADs), remain to be explored. Current approaches consist in assessing the enrichments or influences of proteins at TAD borders. Here, we propose a TAD-free model to directly estimate the blocking effects of architectural proteins, insulators and DNA motifs on long-range contacts, making the model intuitive and biologically meaningful. In addition, the model allows analyzing the whole Hi-C information content (2D information) instead of only focusing on TAD borders (1D information). The model outperforms multiple logistic regression at TAD borders in terms of parameter estimation accuracy and is validated by enhancer-blocking assays. In Drosophila, the results support the insulating role of simple sequence repeats and suggest that the blocking effects depend on the number of repeats. Motif analysis uncovered the roles of the transcriptional factors pannier and tramtrack in blocking long-range contacts. In human, the results suggest that the blocking effects of the well-known architectural proteins CTCF, cohesin and ZNF143 depend on the distance between loci, where each protein may participate at different scales of the 3D chromatin organization.

Style grammars for interactive visualization of architecture.

Science.gov (United States)

Aliaga, Daniel G; Rosen, Paul A; Bekins, Daniel R

2007-01-01

Interactive visualization of architecture provides a way to quickly visualize existing or novel buildings and structures. Such applications require both fast rendering and an effortless input regimen for creating and changing architecture using high-level editing operations that automatically fill in the necessary details. Procedural modeling and synthesis is a powerful paradigm that yields high data amplification and can be coupled with fast-rendering techniques to quickly generate plausible details of a scene without much or any user interaction. Previously, forward generating procedural methods have been proposed where a procedure is explicitly created to generate particular content. In this paper, we present our work in inverse procedural modeling of buildings and describe how to use an extracted repertoire of building grammars to facilitate the visualization and quick modification of architectural structures and buildings. We demonstrate an interactive application where the user draws simple building blocks and, using our system, can automatically complete the building "in the style of" other buildings using view-dependent texture mapping or nonphotorealistic rendering techniques. Our system supports an arbitrary number of building grammars created from user subdivided building models and captured photographs. Using only edit, copy, and paste metaphors, the entire building styles can be altered and transferred from one building to another in a few operations, enhancing the ability to modify an existing architectural structure or to visualize a novel building in the style of the others.

Generic robot architecture

Science.gov (United States)

Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

2010-09-21

The present invention provides methods, computer readable media, and apparatuses for a generic robot architecture providing a framework that is easily portable to a variety of robot platforms and is configured to provide hardware abstractions, abstractions for generic robot attributes, environment abstractions, and robot behaviors. The generic robot architecture includes a hardware abstraction level and a robot abstraction level. The hardware abstraction level is configured for developing hardware abstractions that define, monitor, and control hardware modules available on a robot platform. The robot abstraction level is configured for defining robot attributes and provides a software framework for building robot behaviors from the robot attributes. Each of the robot attributes includes hardware information from at least one hardware abstraction. In addition, each robot attribute is configured to substantially isolate the robot behaviors from the at least one hardware abstraction.

System architectures for telerobotic research

Science.gov (United States)

Harrison, F. Wallace

1989-01-01

Several activities are performed related to the definition and creation of telerobotic systems. The effort and investment required to create architectures for these complex systems can be enormous; however, the magnitude of process can be reduced if structured design techniques are applied. A number of informal methodologies supporting certain aspects of the design process are available. More recently, prototypes of integrated tools supporting all phases of system design from requirements analysis to code generation and hardware layout have begun to appear. Activities related to system architecture of telerobots are described, including current activities which are designed to provide a methodology for the comparison and quantitative analysis of alternative system architectures.

Different micromanipulation applications based on common modular control architecture

Science.gov (United States)

Sipola, Risto; Vallius, Tero; Pudas, Marko; Röning, Juha

2010-01-01

This paper validates a previously introduced scalable modular control architecture and shows how it can be used to implement research equipment. The validation is conducted by presenting different kinds of micromanipulation applications that use the architecture. Conditions of the micro-world are very different from those of the macro-world. Adhesive forces are significant compared to gravitational forces when micro-scale objects are manipulated. Manipulation is mainly conducted by automatic control relying on haptic feedback provided by force sensors. The validated architecture is a hierarchical layered hybrid architecture, including a reactive layer and a planner layer. The implementation of the architecture is modular, and the architecture has a lot in common with open architectures. Further, the architecture is extensible, scalable, portable and it enables reuse of modules. These are the qualities that we validate in this paper. To demonstrate the claimed features, we present different applications that require special control in micrometer, millimeter and centimeter scales. These applications include a device that measures cell adhesion, a device that examines properties of thin films, a device that measures adhesion of micro fibers and a device that examines properties of submerged gel produced by bacteria. Finally, we analyze how the architecture is used in these applications.

Software architecture 2

CERN Document Server

Oussalah, Mourad Chabanne

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

Lightweight enterprise architectures

CERN Document Server

Theuerkorn, Fenix

2004-01-01

STATE OF ARCHITECTUREArchitectural ChaosRelation of Technology and Architecture The Many Faces of Architecture The Scope of Enterprise Architecture The Need for Enterprise ArchitectureThe History of Architecture The Current Environment Standardization Barriers The Need for Lightweight Architecture in the EnterpriseThe Cost of TechnologyThe Benefits of Enterprise Architecture The Domains of Architecture The Gap between Business and ITWhere Does LEA Fit? LEA's FrameworkFrameworks, Methodologies, and Approaches The Framework of LEATypes of Methodologies Types of ApproachesActual System Environmen

Software architecture 1

CERN Document Server

Oussalah , Mourad Chabane

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

Developing a Distributed Computing Architecture at Arizona State University.

Science.gov (United States)

Armann, Neil; And Others

1994-01-01

Development of Arizona State University's computing architecture, designed to ensure that all new distributed computing pieces will work together, is described. Aspects discussed include the business rationale, the general architectural approach, characteristics and objectives of the architecture, specific services, and impact on the university…

Indigenous architecture as a context-oriented architecture, a look at ...

African Journals Online (AJOL)

What has become problematic as the achievement of international style and globalization of architecture during the time has been the purely technological look at architecture, and the architecture without belonging to a place. In recent decades, the topic of sustainable architecture and reconsidering indigenous architecture ...

Design Methodology of a Sensor Network Architecture Supporting Urgent Information and Its Evaluation

Science.gov (United States)

Kawai, Tetsuya; Wakamiya, Naoki; Murata, Masayuki

Wireless sensor networks are expected to become an important social infrastructure which helps our life to be safe, secure, and comfortable. In this paper, we propose design methodology of an architecture for fast and reliable transmission of urgent information in wireless sensor networks. In this methodology, instead of establishing single complicated monolithic mechanism, several simple and fully-distributed control mechanisms which function in different spatial and temporal levels are incorporated on each node. These mechanisms work autonomously and independently responding to the surrounding situation. We also show an example of a network architecture designed following the methodology. We evaluated the performance of the architecture by extensive simulation and practical experiments and our claim was supported by the results of these experiments.

Control system architecture: The standard and non-standard models

International Nuclear Information System (INIS)

Thuot, M.E.; Dalesio, L.R.

1993-01-01

Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a ''standard model''. The ''standard model'' consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the ''standard model'' to determine if the requirements of ''non-standard'' architectures can be met. Several possible extensions to the ''standard model'' are suggested including software as well as the hardware architectural feature

Tank waste remediation system architecture tree; TOPICAL

International Nuclear Information System (INIS)

PECK, L.G.

1999-01-01

The TWRS Architecture Tree presented in this document is a hierarchical breakdown to support the TWRS systems engineering analysis of the TWRS physical system, including facilities, hardware and software. The purpose for this systems engineering architecture tree is to describe and communicate the system's selected and existing architecture, to provide a common structure to improve the integration of work and resulting products, and to provide a framework as a basis for TWRS Specification Tree development

Architecture in the Islamic Civilization: Muslim Building or Islamic Architecture

OpenAIRE

Yassin, Ayat Ali; Utaberta, Dr. Nangkula

2012-01-01

The main problem of the theory in the arena of islamic architecture is affected by some of its Westernthoughts, and stereotyping the islamic architecture according to Western thoughts; this leads to the breakdownof the foundations in the islamic architecture. It is a myth that islamic architecture is subjected to theinfluence from foreign architectures. This paper will highlight the dialectical concept of islamic architecture ormuslim buildings and the areas of recognition in islamic architec...

A flexible architecture for advanced process control solutions

Science.gov (United States)

Faron, Kamyar; Iourovitski, Ilia

2005-05-01

Advanced Process Control (APC) is now mainstream practice in the semiconductor manufacturing industry. Over the past decade and a half APC has evolved from a "good idea", and "wouldn"t it be great" concept to mandatory manufacturing practice. APC developments have primarily dealt with two major thrusts, algorithms and infrastructure, and often the line between them has been blurred. The algorithms have evolved from very simple single variable solutions to sophisticated and cutting edge adaptive multivariable (input and output) solutions. Spending patterns in recent times have demanded that the economics of a comprehensive APC infrastructure be completely justified for any and all cost conscious manufacturers. There are studies suggesting integration costs as high as 60% of the total APC solution costs. Such cost prohibitive figures clearly diminish the return on APC investments. This has limited the acceptance and development of pure APC infrastructure solutions for many fabs. Modern APC solution architectures must satisfy the wide array of requirements from very manual R&D environments to very advanced and automated "lights out" manufacturing facilities. A majority of commercially available control solutions and most in house developed solutions lack important attributes of scalability, flexibility, and adaptability and hence require significant resources for integration, deployment, and maintenance. Many APC improvement efforts have been abandoned and delayed due to legacy systems and inadequate architectural design. Recent advancements (Service Oriented Architectures) in the software industry have delivered ideal technologies for delivering scalable, flexible, and reliable solutions that can seamlessly integrate into any fabs" existing system and business practices. In this publication we shall evaluate the various attributes of the architectures required by fabs and illustrate the benefits of a Service Oriented Architecture to satisfy these requirements. Blue

UMA/GAN network architecture analysis

Science.gov (United States)

Yang, Liang; Li, Wensheng; Deng, Chunjian; Lv, Yi

2009-07-01

This paper is to critically analyze the architecture of UMA which is one of Fix Mobile Convergence (FMC) solutions, and also included by the third generation partnership project(3GPP). In UMA/GAN network architecture, UMA Network Controller (UNC) is the key equipment which connects with cellular core network and mobile station (MS). UMA network could be easily integrated into the existing cellular networks without influencing mobile core network, and could provides high-quality mobile services with preferentially priced indoor voice and data usage. This helps to improve subscriber's experience. On the other hand, UMA/GAN architecture helps to integrate other radio technique into cellular network which includes WiFi, Bluetooth, and WiMax and so on. This offers the traditional mobile operators an opportunity to integrate WiMax technique into cellular network. In the end of this article, we also give an analysis of potential influence on the cellular core networks ,which is pulled by UMA network.

Internationalising architectural education

OpenAIRE

Byrd, Hugh

2013-01-01

This is a track record of my involvement and success in internationalizing architectural education since 2009. It includes projects and outcomes that cover several continents and celebrates the success of my students in various areas of teaching and research including: • International design competitions • International employment • International PhD Students • Student publications in international journals and conferences

Teaching Architecture - Contemporary Challenges and Threats in the Complexity of Built Environment

Science.gov (United States)

Borucka, Justyna; Macikowski, Bartosz

2017-10-01

The complexity of the modern built environment is a problem not only of architectural and urban issues. This issue extends to many other disciplines as well as covering a wide range of social engagements. The idea of writing this paper is generally initiated by the debate which took place in Gdańsk on 22.01.2016, and was prepared in order to meet representatives of the four circles of interest within the architectural sphere: universities, professional architectural organisations and associations, architectural practice (professionals running their own studios, managing projects and leading construction) and local social organisations active in city of Gdańsk. This paper is a comparison of the results of this discussion in relation to the policy and methodology of architecture teaching on the University level. Teaching architecture and urban planning according to the present discussion needs to be improved and advanced to meet the increasing complexity of both disciplines. Contemporary dynamic development of cities creates the necessity of engaging multiple stakeholders, participants and users of architecture and urban space. This is crucial to make them conscious of sharing responsibility for increasing the quality of living in the built environment. This discussion about architectural education is open and has the nature of an ongoing process adapting to a changing environment and is in fact a constant challenge which brings questions rather than simple answers. Transformation of architecture and urban planning, and consequently its education are increasingly entering into the related fields, especially into the professional practice and social environment. The question of how to teach architecture and urban planning and educate users of urban space should take place in the context of a wide discussion. This interdisciplinary debate seems to be a crucial and challenging step towards improving the future education of architecture and urban planning leading to a

Theatre and Cinema Architecture: A Guide to Information Sources.

Science.gov (United States)

Stoddard, Richard

This annotated bibliography cites works related to theatres, movie houses, opera houses, and dance facilities. It is divided into three parts: general references, theatre architecture, and cinema architecture. The part on general references includes bibliographies and periodicals. The second and main part of the guide, on theatre architecture,…

Application of Tessellation in Architectural Geometry Design

Science.gov (United States)

Chang, Wei

2018-06-01

Tessellation plays a significant role in architectural geometry design, which is widely used both through history of architecture and in modern architectural design with the help of computer technology. Tessellation has been found since the birth of civilization. In terms of dimensions, there are two- dimensional tessellations and three-dimensional tessellations; in terms of symmetry, there are periodic tessellations and aperiodic tessellations. Besides, some special types of tessellations such as Voronoi Tessellation and Delaunay Triangles are also included. Both Geometry and Crystallography, the latter of which is the basic theory of three-dimensional tessellations, need to be studied. In history, tessellation was applied into skins or decorations in architecture. The development of Computer technology enables tessellation to be more powerful, as seen in surface control, surface display and structure design, etc. Therefore, research on the application of tessellation in architectural geometry design is of great necessity in architecture studies.

Advanced pixel architectures for scientific image sensors

CERN Document Server

Coath, R; Godbeer, A; Wilson, M; Turchetta, R

2009-01-01

We present recent developments from two projects targeting advanced pixel architectures for scientific applications. Results are reported from FORTIS, a sensor demonstrating variants on a 4T pixel architecture. The variants include differences in pixel and diode size, the in-pixel source follower transistor size and the capacitance of the readout node to optimise for low noise and sensitivity to small amounts of charge. Results are also reported from TPAC, a complex pixel architecture with ~160 transistors per pixel. Both sensors were manufactured in the 0.18μm INMAPS process, which includes a special deep p-well layer and fabrication on a high resistivity epitaxial layer for improved charge collection efficiency.

Multiprocessor architecture: Synthesis and evaluation

Science.gov (United States)

Standley, Hilda M.

1990-01-01

Multiprocessor computed architecture evaluation for structural computations is the focus of the research effort described. Results obtained are expected to lead to more efficient use of existing architectures and to suggest designs for new, application specific, architectures. The brief descriptions given outline a number of related efforts directed toward this purpose. The difficulty is analyzing an existing architecture or in designing a new computer architecture lies in the fact that the performance of a particular architecture, within the context of a given application, is determined by a number of factors. These include, but are not limited to, the efficiency of the computation algorithm, the programming language and support environment, the quality of the program written in the programming language, the multiplicity of the processing elements, the characteristics of the individual processing elements, the interconnection network connecting processors and non-local memories, and the shared memory organization covering the spectrum from no shared memory (all local memory) to one global access memory. These performance determiners may be loosely classified as being software or hardware related. This distinction is not clear or even appropriate in many cases. The effect of the choice of algorithm is ignored by assuming that the algorithm is specified as given. Effort directed toward the removal of the effect of the programming language and program resulted in the design of a high-level parallel programming language. Two characteristics of the fundamental structure of the architecture (memory organization and interconnection network) are examined.

Architecture effects on multivalent interactions by polypeptide-based multivalent ligands

Science.gov (United States)

Liu, Shuang

protein materials, including structural as well as functional proteins. Therefore, polypeptide-based multivalent scaffolds are used to display ligands to assess the contribution of different architectural parameters to the multivalent binding events. In this work, a family of alanine-rich alpha-helical glycopolypeptides was designed and synthesized by a combination of protein engineering and chemical coupling, to display two types of saccharide ligands for two different multivalent binding systems. The valencies, chain length and spacing between adjacent ligands of these multivalent ligands were designed in order to study architecture effects on multivalent interactions. The polypeptides and their glycoconjugates were characterized via various methods, including SDS-PAGE, NMR, HPLC, amino acid analysis (AAA), MALDI, circular dichroism (CD) and GPC. In the first multivalent binding system, cholera toxin B pentamer (CT B5) was chosen to be the protein receptor due to its well-characterized structure, lack of significant steric interference of binding to multiple binding sites, and requirement of only simple monosaccharide as ligands. Galactopyranoside was incorporated into polypeptide scaffolds through amine-carboxylic acid coupling to the side chains of glutamic acid residues. The inhibition and binding to CT B5 of these glycopolypeptide ligands were evaluated by direct enzyme-linked assay (DELA). As a complement method, weak affinity chromatography (WAC) was also used to evaluate glycopolypeptides binding to a CT B5 immobilized column. The architecture effects on CT B 5 inhibition are discussed. In the second system, cell surface receptor L-selectin was targeted by polypeptide-based multivalent ligands containing disulfated galactopyranoside ligands, due to its important roles in various immunological activities. The effects of glycopolypeptide architectural variables L-selectin shedding were evaluated via ELISA-based assays. These polypeptide-based multivalent ligands

Software architecture analysis tool : software architecture metrics collection

NARCIS (Netherlands)

Muskens, J.; Chaudron, M.R.V.; Westgeest, R.

2002-01-01

The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a

Architectural Considerations for Holonic Shop Floor Control

DEFF Research Database (Denmark)

Langer, Gilad; Bilberg, Arne

1997-01-01

of the HMS concept, followed by an investigation regard-ing the development of shop floor control architectures. This will include a summary of the ongoing research on HMS, and current results regarding the development of a holonic SFC architecture in a cellular manufacturing perspective. The paper...

Functional Interface Considerations within an Exploration Life Support System Architecture

Science.gov (United States)

Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

2016-01-01

As notional life support system (LSS) architectures are developed and evaluated, myriad options must be considered pertaining to process technologies, components, and equipment assemblies. Each option must be evaluated relative to its impact on key functional interfaces within the LSS architecture. A leading notional architecture has been developed to guide the path toward realizing future crewed space exploration goals. This architecture includes atmosphere revitalization, water recovery and management, and environmental monitoring subsystems. Guiding requirements for developing this architecture are summarized and important interfaces within the architecture are discussed. The role of environmental monitoring within the architecture is described.

Implications of behavioral architecture for the evolution of self-organized division of labor.

Directory of Open Access Journals (Sweden)

A Duarte

Full Text Available Division of labor has been studied separately from a proximate self-organization and an ultimate evolutionary perspective. We aim to bring together these two perspectives. So far this has been done by choosing a behavioral mechanism a priori and considering the evolution of the properties of this mechanism. Here we use artificial neural networks to allow for a more open architecture. We study whether emergent division of labor can evolve in two different network architectures; a simple feedforward network, and a more complex network that includes the possibility of self-feedback from previous experiences. We focus on two aspects of division of labor; worker specialization and the ratio of work performed for each task. Colony fitness is maximized by both reducing idleness and achieving a predefined optimal work ratio. Our results indicate that architectural constraints play an important role for the outcome of evolution. With the simplest network, only genetically determined specialization is possible. This imposes several limitations on worker specialization. Moreover, in order to minimize idleness, networks evolve a biased work ratio, even when an unbiased work ratio would be optimal. By adding self-feedback to the network we increase the network's flexibility and worker specialization evolves under a wider parameter range. Optimal work ratios are more easily achieved with the self-feedback network, but still provide a challenge when combined with worker specialization.

Implications of behavioral architecture for the evolution of self-organized division of labor.

Science.gov (United States)

Duarte, A; Scholtens, E; Weissing, F J

2012-01-01

Division of labor has been studied separately from a proximate self-organization and an ultimate evolutionary perspective. We aim to bring together these two perspectives. So far this has been done by choosing a behavioral mechanism a priori and considering the evolution of the properties of this mechanism. Here we use artificial neural networks to allow for a more open architecture. We study whether emergent division of labor can evolve in two different network architectures; a simple feedforward network, and a more complex network that includes the possibility of self-feedback from previous experiences. We focus on two aspects of division of labor; worker specialization and the ratio of work performed for each task. Colony fitness is maximized by both reducing idleness and achieving a predefined optimal work ratio. Our results indicate that architectural constraints play an important role for the outcome of evolution. With the simplest network, only genetically determined specialization is possible. This imposes several limitations on worker specialization. Moreover, in order to minimize idleness, networks evolve a biased work ratio, even when an unbiased work ratio would be optimal. By adding self-feedback to the network we increase the network's flexibility and worker specialization evolves under a wider parameter range. Optimal work ratios are more easily achieved with the self-feedback network, but still provide a challenge when combined with worker specialization.

Hydrothermal synthesis of lindgrenite with a hollow and prickly sphere-like architecture

International Nuclear Information System (INIS)

Xu Jiasheng; Xue Dongfeng

2007-01-01

Lindgrenite [Cu 3 (OH) 2 (MoO 4 ) 2 ] with a hollow and prickly sphere-like architecture has been synthesized via a simple and mild hydrothermal route in the absence of any external inorganic additives or organic structure-directing templates. The hierarchical lindgrenite particles are hollow and prickly spheres, which are comprised of numerous small crystal strips that are aligned perpendicularly to the spherical surface. Two factors are important for the formation of hollow and prickly architecture in the present process. One is the general phenomenon of Ostwald ripening in solution, which can be responsible for the hollow structure; the other is that lindgrenite crystals have a rhombic growth habit, which plays an important role in the formation of prickly surface. Furthermore, Cu 3 Mo 2 O 9 with the similar size and morphology can be easily obtained by a simple thermal treatment of the as-prepared lindgrenite in air atmosphere. - Graphical abstract: Lindgrenite [Cu 3 (OH) 2 (MoO 4 ) 2 ] with a hollow and prickly sphere-like architecture has been synthesized via a hydrothermal route. The hierarchical lindgrenite particles are hollow and prickly spheres, which are comprised of numerous crystal strips that are aligned perpendicularly to the spherical surface. Cu 3 Mo 2 O 9 with the similar size and morphology can be easily obtained by a thermal treatment of the as-prepared lindgrenite

Control system architecture: The standard and non-standard models

International Nuclear Information System (INIS)

Thuot, M.E.; Dalesio, L.R.

1993-01-01

Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a open-quotes standard modelclose quotes. The open-quotes standard modelclose quotes consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the open-quotes standard modelclose quotes to determine if the requirements of open-quotes non-standardclose quotes architectures can be met. Several possible extensions to the open-quotes standard modelclose quotes are suggested including software as well as the hardware architectural features

Developing a Psychologically Inspired Cognitive Architecture for Robotic Control: The Symbolic and Subsymbolic Robotic Intelligence Control System (SS-RICS

Directory of Open Access Journals (Sweden)

Troy Dale Kelley

2006-09-01

Full Text Available This paper describes the ongoing development of a robotic control architecture that was inspired by computational cognitive architectures from the discipline of cognitive psychology. The robotic control architecture combines symbolic and subsymbolic representations of knowledge into a unified control structure. The architecture is organized as a goal driven, serially executing, production system at the highest symbolic level; and a multiple algorithm, parallel executing, simple collection of algorithms at the lowest subsymbolic level. The goal is to create a system that will progress through the same cognitive developmental milestones as do human infants. Common robotics problems of localization, object recognition, and object permanence are addressed within the specified framework.

Developing a Psychologically Inspired Cognitive Architecture for Robotic Control: The Symbolic and Subsymbolic Robotic Intelligence Control System (SS-RICS

Directory of Open Access Journals (Sweden)

Troy Dale Kelley

2008-11-01

Full Text Available This paper describes the ongoing development of a robotic control architecture that was inspired by computational cognitive architectures from the discipline of cognitive psychology. The robotic control architecture combines symbolic and subsymbolic representations of knowledge into a unified control structure. The architecture is organized as a goal driven, serially executing, production system at the highest symbolic level; and a multiple algorithm, parallel executing, simple collection of algorithms at the lowest subsymbolic level. The goal is to create a system that will progress through the same cognitive developmental milestones as do human infants. Common robotics problems of localization, object recognition, and object permanence are addressed within the specified framework.

Aerobot Autonomy Architecture

Science.gov (United States)

Elfes, Alberto; Hall, Jeffery L.; Kulczycki, Eric A.; Cameron, Jonathan M.; Morfopoulos, Arin C.; Clouse, Daniel S.; Montgomery, James F.; Ansar, Adnan I.; Machuzak, Richard J.

2009-01-01

An architecture for autonomous operation of an aerobot (i.e., a robotic blimp) to be used in scientific exploration of planets and moons in the Solar system with an atmosphere (such as Titan and Venus) is undergoing development. This architecture is also applicable to autonomous airships that could be flown in the terrestrial atmosphere for scientific exploration, military reconnaissance and surveillance, and as radio-communication relay stations in disaster areas. The architecture was conceived to satisfy requirements to perform the following functions: a) Vehicle safing, that is, ensuring the integrity of the aerobot during its entire mission, including during extended communication blackouts. b) Accurate and robust autonomous flight control during operation in diverse modes, including launch, deployment of scientific instruments, long traverses, hovering or station-keeping, and maneuvers for touch-and-go surface sampling. c) Mapping and self-localization in the absence of a global positioning system. d) Advanced recognition of hazards and targets in conjunction with tracking of, and visual servoing toward, targets, all to enable the aerobot to detect and avoid atmospheric and topographic hazards and to identify, home in on, and hover over predefined terrain features or other targets of scientific interest. The architecture is an integrated combination of systems for accurate and robust vehicle and flight trajectory control; estimation of the state of the aerobot; perception-based detection and avoidance of hazards; monitoring of the integrity and functionality ("health") of the aerobot; reflexive safing actions; multi-modal localization and mapping; autonomous planning and execution of scientific observations; and long-range planning and monitoring of the mission of the aerobot. The prototype JPL aerobot (see figure) has been tested extensively in various areas in the California Mojave desert.

Information management architecture for an integrated computing environment for the Environmental Restoration Program. Environmental Restoration Program, Volume 3, Interim technical architecture

International Nuclear Information System (INIS)

1994-09-01

This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole

Defining inter-cloud architecture for interoperability and integration

NARCIS (Netherlands)

Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.; de Laat, C.; Zimmermann, W.; Lee, Y.W.; Demchenko, Y.

2012-01-01

This paper presents an on-going research to develop the Inter-Cloud Architecture, which addresses the architectural problems in multi-provider multi-domain heterogeneous cloud based applications integration and interoperability, including integration and interoperability with legacy infrastructure

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

Science.gov (United States)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

Adaptive Architecture - a Spatial Objective

DEFF Research Database (Denmark)

Unterrainer, Walter

2011-01-01

New challenges of a fast changing society with new social phenomena as well as growing environmental problems ask for rethinking our habitats on all scales and reflecting our design methods to produce them. Many Megacities prepare with big projects against dramatic environmental threats (New York...... detail in itself, does not create humanity: We have today enough of superficial and rather bad architecture which is modern.´ There is nothing to add on....... the weakest point in the development towards a more sustainable architecture on all scales, the problems and solutions are discussed as spatial challenges, including all aspects of spatial creations and spatial retrofitting. To get to the point: The ´sustainable´ in ´sustainable architecture´ is reduced...... in too many buildings to implementations of new technologies, in its worst examples reduced to meaningless applications of new technologies to rather mediocre architecture. I am not arguing in general against new building technologies and I have been involved myself in developments of new building skins...

Kirigami-based three-dimensional OLED concepts for architectural lighting

Science.gov (United States)

Kim, Taehwan; Price, Jared S.; Grede, Alex; Lee, Sora; Jackson, Thomas N.; Giebink, Noel C.

2017-08-01

Dramatic improvements in white organic light emitting diode (OLED) performance and lifetime over the past decade are driving commercialization of this technology for solid-state lighting applications. As white OLEDs attempt to gain a foothold in the market, however, the biggest challenge outside of lowering their manufacturing cost arguably now lies in creating an architecturally adaptable form factor that will drive public adoption and differentiate OLED lighting from established LED products. Here, we present concepts based on kirigami (the Japanese art of paper cutting and folding) that enable intricate three-dimensional (3D) OLED lighting structures from two dimensional layouts. Using an ultraflexible, encapsulated OLED device architecture on 25 60 μm thick clear polyimide film substrate with simple cut and fold patterns, we demonstrate a series of different lighting concepts ranging from a simple `pop up' structure to more complex designs such as stretchable window blind-like panel, candle flame, and multi-element globe lamp. We only find slight degradation in OLED electrical performance when these designs are shaped into 3D. Our results point to an alternate paradigm for OLED lighting that moves beyond traditional 2D panels toward 3D designs that deliver unique and creative new opportunities for lighting.

Space Internet Architectures and Technologies for NASA Enterprises

Science.gov (United States)

Bhasin, Kul; Hayden, Jeffrey L.

2001-01-01

NASA's future communications services will be supplied through a space communications network that mirrors the terrestrial Internet in its capabilities and flexibility. The notional requirements for future data gathering and distribution by this Space Internet have been gathered from NASA's Earth Science Enterprise (ESE), the Human Exploration and Development in Space (HEDS), and the Space Science Enterprise (SSE). This paper describes a communications infrastructure for the Space Internet, the architectures within the infrastructure, and the elements that make up the architectures. The architectures meet the requirements of the enterprises beyond 2010 with Internet 'compatible technologies and functionality. The elements of an architecture include the backbone, access, inter-spacecraft and proximity communication parts. From the architectures, technologies have been identified which have the most impact and are critical for the implementation of the architectures.

Analysis of Architecture Pattern Usage in Legacy System Architecture Documentation

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2008-01-01

Architecture patterns are an important tool in architectural design. However, while many architecture patterns have been identified, there is little in-depth understanding of their actual use in software architectures. For instance, there is no overview of how many patterns are used per system or

On the Architectural Engineering Competences in Architectural Design

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning

2007-01-01

In 1997 a new education in Architecture & Design at Department of Architecture and Design, Aalborg University was started with 50 students. During the recent years this number has increased to approximately 100 new students each year, i.e. approximately 500 students are following the 3 years...... bachelor (BSc) and the 2 years master (MSc) programme. The first 5 semesters are common for all students followed by 5 semesters with specialization into Architectural Design, Urban Design, Industrial Design or Digital Design. The present paper gives a short summary of the architectural engineering...

REST in practice Hypermedia and systems architecture

CERN Document Server

Webber, Jim; Robinson, Ian

2010-01-01

Why don't typical enterprise projects go as smoothly as projects you develop for the Web? Does the REST architectural style really present a viable alternative for building distributed systems and enterprise-class applications? In this insightful book, three SOA experts provide a down-to-earth explanation of REST and demonstrate how you can develop simple and elegant distributed hypermedia systems by applying the Web's guiding principles to common enterprise computing problems. You'll learn techniques for implementing specific Web technologies and patterns to solve the needs of a typical com

A Flight Control System Architecture for the NASA AirSTAR Flight Test Infrastructure

Science.gov (United States)

Murch, Austin M.

2008-01-01

A flight control system architecture for the NASA AirSTAR infrastructure has been designed to address the challenges associated with safe and efficient flight testing of research control laws in adverse flight conditions. The AirSTAR flight control system provides a flexible framework that enables NASA Aviation Safety Program research objectives, and includes the ability to rapidly integrate and test research control laws, emulate component or sensor failures, inject automated control surface perturbations, and provide a baseline control law for comparison to research control laws and to increase operational efficiency. The current baseline control law uses an angle of attack command augmentation system for the pitch axis and simple stability augmentation for the roll and yaw axes.

Automation and Control Learning Environment with Mixed Reality Remote Experiments Architecture

Directory of Open Access Journals (Sweden)

Frederico M. Schaf

2007-05-01

Full Text Available This work aims to the use of remotely web-based experiments to improve the learning process of automation and control systems theory courses. An architecture combining virtual learning environments, remote experiments, students guide and experiments analysis is proposed based on a wide state of art study. The validation of the architecture uses state of art technologies and new simple developed programs to implement the case studies presented. All implementations presented use an internet accessible virtual learning environment providing educational resources, guides and learning material to create a distance learning course associated with the remote mixed reality experiment. This work is part of the RExNet consortium, supported by the European Alfa project.

Connecting Architecture and Implementation

Science.gov (United States)

Buchgeher, Georg; Weinreich, Rainer

Software architectures are still typically defined and described independently from implementation. To avoid architectural erosion and drift, architectural representation needs to be continuously updated and synchronized with system implementation. Existing approaches for architecture representation like informal architecture documentation, UML diagrams, and Architecture Description Languages (ADLs) provide only limited support for connecting architecture descriptions and implementations. Architecture management tools like Lattix, SonarJ, and Sotoarc and UML-tools tackle this problem by extracting architecture information directly from code. This approach works for low-level architectural abstractions like classes and interfaces in object-oriented systems but fails to support architectural abstractions not found in programming languages. In this paper we present an approach for linking and continuously synchronizing a formalized architecture representation to an implementation. The approach is a synthesis of functionality provided by code-centric architecture management and UML tools and higher-level architecture analysis approaches like ADLs.

Raexplore: Enabling Rapid, Automated Architecture Exploration for Full Applications

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yao [Argonne National Lab. (ANL), Argonne, IL (United States); Balaprakash, Prasanna [Argonne National Lab. (ANL), Argonne, IL (United States); Meng, Jiayuan [Argonne National Lab. (ANL), Argonne, IL (United States); Morozov, Vitali [Argonne National Lab. (ANL), Argonne, IL (United States); Parker, Scott [Argonne National Lab. (ANL), Argonne, IL (United States); Kumaran, Kalyan [Argonne National Lab. (ANL), Argonne, IL (United States)

2014-12-01

We present Raexplore, a performance modeling framework for architecture exploration. Raexplore enables rapid, automated, and systematic search of architecture design space by combining hardware counter-based performance characterization and analytical performance modeling. We demonstrate Raexplore for two recent manycore processors IBM Blue- Gene/Q compute chip and Intel Xeon Phi, targeting a set of scientific applications. Our framework is able to capture complex interactions between architectural components including instruction pipeline, cache, and memory, and to achieve a 3–22% error for same-architecture and cross-architecture performance predictions. Furthermore, we apply our framework to assess the two processors, and discover and evaluate a list of architectural scaling options for future processor designs.

Visualization of decision processes using a cognitive architecture

Science.gov (United States)

Livingston, Mark A.; Murugesan, Arthi; Brock, Derek; Frost, Wende K.; Perzanowski, Dennis

2013-01-01

Cognitive architectures are computational theories of reasoning the human mind engages in as it processes facts and experiences. A cognitive architecture uses declarative and procedural knowledge to represent mental constructs that are involved in decision making. Employing a model of behavioral and perceptual constraints derived from a set of one or more scenarios, the architecture reasons about the most likely consequence(s) of a sequence of events. Reasoning of any complexity and depth involving computational processes, however, is often opaque and challenging to comprehend. Arguably, for decision makers who may need to evaluate or question the results of autonomous reasoning, it would be useful to be able to inspect the steps involved in an interactive, graphical format. When a chain of evidence and constraint-based decision points can be visualized, it becomes easier to explore both how and why a scenario of interest will likely unfold in a particular way. In initial work on a scheme for visualizing cognitively-based decision processes, we focus on generating graphical representations of models run in the Polyscheme cognitive architecture. Our visualization algorithm operates on a modified version of Polyscheme's output, which is accomplished by augmenting models with a simple set of tags. We provide example visualizations and discuss properties of our technique that pose challenges for our representation goals. We conclude with a summary of feedback solicited from domain experts and practitioners in the field of cognitive modeling.

Designing Domain-Specific Heterogeneous Architectures from Dataflow Programs

Directory of Open Access Journals (Sweden)

Süleyman Savas

2018-04-01

Full Text Available The last ten years have seen performance and power requirements pushing computer architectures using only a single core towards so-called manycore systems with hundreds of cores on a single chip. To further increase performance and energy efficiency, we are now seeing the development of heterogeneous architectures with specialized and accelerated cores. However, designing these heterogeneous systems is a challenging task due to their inherent complexity. We proposed an approach for designing domain-specific heterogeneous architectures based on instruction augmentation through the integration of hardware accelerators into simple cores. These hardware accelerators were determined based on their common use among applications within a certain domain.The objective was to generate heterogeneous architectures by integrating many of these accelerated cores and connecting them with a network-on-chip. The proposed approach aimed to ease the design of heterogeneous manycore architectures—and, consequently, exploration of the design space—by automating the design steps. To evaluate our approach, we enhanced our software tool chain with a tool that can generate accelerated cores from dataflow programs. This new tool chain was evaluated with the aid of two use cases: radar signal processing and mobile baseband processing. We could achieve an approximately 4 × improvement in performance, while executing complete applications on the augmented cores with a small impact (2.5–13% on area usage. The generated accelerators are competitive, achieving more than 90% of the performance of hand-written implementations.

Electromagnetic Physics Models for Parallel Computing Architectures

Science.gov (United States)

Amadio, G.; Ananya, A.; Apostolakis, J.; Aurora, A.; Bandieramonte, M.; Bhattacharyya, A.; Bianchini, C.; Brun, R.; Canal, P.; Carminati, F.; Duhem, L.; Elvira, D.; Gheata, A.; Gheata, M.; Goulas, I.; Iope, R.; Jun, S. Y.; Lima, G.; Mohanty, A.; Nikitina, T.; Novak, M.; Pokorski, W.; Ribon, A.; Seghal, R.; Shadura, O.; Vallecorsa, S.; Wenzel, S.; Zhang, Y.

2016-10-01

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part of the GeantV project. Results of preliminary performance evaluation and physics validation are presented as well.

Module Architecture for in Situ Space Laboratories

Science.gov (United States)

Sherwood, Brent

2010-01-01

The paper analyzes internal outfitting architectures for space exploration laboratory modules. ISS laboratory architecture is examined as a baseline for comparison; applicable insights are derived. Laboratory functional programs are defined for seven planet-surface knowledge domains. Necessary and value-added departures from the ISS architecture standard are defined, and three sectional interior architecture options are assessed for practicality and potential performance. Contemporary guidelines for terrestrial analytical laboratory design are found to be applicable to the in-space functional program. Densepacked racks of system equipment, and high module volume packing ratios, should not be assumed as the default solution for exploration laboratories whose primary activities include un-scriptable investigations and experimentation on the system equipment itself.

Novel Architecture for LTE World-Phones

DEFF Research Database (Denmark)

Barrio, Samantha Caporal Del; Tatomirescu, Alexandru; Pedersen, Gert Frølund

2013-01-01

The 4th Generation of mobile communications (4G) came with new challenges on the antenna bandwidth and on the front-end architecture of mobile phones. This letter proposes a novel architecture overcoming these challenges. It includes narrow-band tunable antennas, co-designed with a tunable Front-......- End (FE). Simulations and measurements demonstrate the concept for low and high bands of the LTE frequency spectrum....

Rock and pop venues acoustic and architectural design

CERN Document Server

Adelman-Larsen, Niels Werner

2014-01-01

Popular music plays an substantial role in most people’s life. The demand and financial revenue of Rock and pop concerts is large and still increasing. Though 80% of the music turnover is done in Rock and Pop Music, books assess only Classical concert and opera houses. However, the requirements for pop music halls are different from classical Music and opera houses. This book closes this gap including the following features: In part one, the book A. Gives a objective methodology to assess Rock and Pop Music Venues B. Shows essential construction details and choices of building materials in the design of new venues or the renovation of old ones. In part two, the book C. Presents a set of famous European rock and pop venues, their architecture, their beauty and their properties. D. These Venues are assessed by a new and comparably simple method to objectively rate halls. Subjective data complete the assessment and give a full picture of the sound quality of a venue.

How organisation of architecture documentation affects architectural knowledge retrieval

NARCIS (Netherlands)

de Graaf, K.A.; Liang, P.; Tang, A.; Vliet, J.C.

A common approach to software architecture documentation in industry projects is the use of file-based documents. This approach offers a single-dimensional arrangement of the architectural knowledge. Knowledge retrieval from file-based architecture documentation is efficient if the organisation of

Security for service oriented architectures

CERN Document Server

Williams, Walter

2014-01-01

Although integrating security into the design of applications has proven to deliver resilient products, there are few books available that provide guidance on how to incorporate security into the design of an application. Filling this need, Security for Service Oriented Architectures examines both application and security architectures and illustrates the relationship between the two. Supplying authoritative guidance on how to design distributed and resilient applications, the book provides an overview of the various standards that service oriented and distributed applications leverage, includ

HyperCell: A Bio-inspired Design Framework for Real-time Interactive Architectures

Directory of Open Access Journals (Sweden)

Jia-Rey Chang

2018-01-01

Full Text Available This pioneering research focuses on Biomimetic Interactive Architecture using “Computation”, “Embodiment”, and “Biology” to generate an intimate embodied convergence to propose a novel rule-based design framework for creating organic architectures composed of swarm-based intelligent components. Furthermore, the research boldly claims that Interactive Architecture should emerge as the next truly Organic Architecture. As the world and society are dynamically changing, especially in this digital era, the research dares to challenge the Utilitas, Firmitas, and Venustas of the traditional architectural Weltanschauung, and rejects them by adopting the novel notion that architecture should be dynamic, fluid, and interactive. This project reflects a trajectory from the 1960’s with the advent of the avant-garde architectural design group, Archigram, and its numerous intriguing and pioneering visionary projects. Archigram’s non-standard, mobile, and interactive projects profoundly influenced a new generation of architects to explore the connection between technology and their architectural projects. This research continues this trend of exploring novel design thinking and the framework of Interactive Architecture by discovering the interrelationship amongst three major topics: “Computation”, “Embodiment”, and “Biology”. The project aims to elucidate pioneering research combining these three topics in one discourse: “Bio-inspired digital architectural design”. These three major topics will be introduced in this Summary.   “Computation”, is any type of calculation that includes both arithmetical and nonarithmetical steps and follows a well-defined model understood and described as, for example, an algorithm. But, in this research, refers to the use of data storage, parametric design application, and physical computing for developing informed architectural designs. “Form” has always been the most critical focus in

Eco-architecture: Nostalgia or present-day challenge

Energy Technology Data Exchange (ETDEWEB)

Spath, R.

1982-05-01

Ecological architecture contains the so-called alternative ways of building, taking into consideration passive energy systems in accordance with building-biological aspects and their natural incorporation in the landscape. The objective of ecological architecture is to connect the historical experiences in the adaptation of buildings to regional, local, and climate conditions with todays possibilities of building. This requests a changed planning of the building. Alternative architecture begins with the planning process and the user has to participate actively. It also includes the greening of the plot and the external arrangement.

The NOAA Satellite Observing System Architecture Study

Science.gov (United States)

Volz, Stephen; Maier, Mark; Di Pietro, David

2016-01-01

NOAA is beginning a study, the NOAA Satellite Observing System Architecture (NSOSA) study, to plan for the future operational environmental satellite system that will follow GOES and JPSS, beginning about 2030. This is an opportunity to design a modern architecture with no pre-conceived notions regarding instruments, platforms, orbits, etc. The NSOSA study will develop and evaluate architecture alternatives to include partner and commercial alternatives that are likely to become available. The objectives will include both functional needs and strategic characteristics (e.g., flexibility, responsiveness, sustainability). Part of this study is the Space Platform Requirements Working Group (SPRWG), which is being commissioned by NESDIS. The SPRWG is charged to assess new or existing user needs and to provide relative priorities for observational needs in the context of the future architecture. SPRWG results will serve as input to the process for new foundational (Level 0 and Level 1) requirements for the next generation of NOAA satellites that follow the GOES-R, JPSS, DSCOVR, Jason-3, and COSMIC-2 missions.

Integrated Optical Interconnect Architectures for Embedded Systems

CERN Document Server

Nicolescu, Gabriela

2013-01-01

This book provides a broad overview of current research in optical interconnect technologies and architectures. Introductory chapters on high-performance computing and the associated issues in conventional interconnect architectures, and on the fundamental building blocks for integrated optical interconnect, provide the foundations for the bulk of the book which brings together leading experts in the field of optical interconnect architectures for data communication. Particular emphasis is given to the ways in which the photonic components are assembled into architectures to address the needs of data-intensive on-chip communication, and to the performance evaluation of such architectures for specific applications.   Provides state-of-the-art research on the use of optical interconnects in Embedded Systems; Begins with coverage of the basics for high-performance computing and optical interconnect; Includes a variety of on-chip optical communication topologies; Features coverage of system integration and opti...

Capital Architecture: Situating symbolism parallel to architectural methods and technology

Science.gov (United States)

Daoud, Bassam

Capital Architecture is a symbol of a nation's global presence and the cultural and social focal point of its inhabitants. Since the advent of High-Modernism in Western cities, and subsequently decolonised capitals, civic architecture no longer seems to be strictly grounded in the philosophy that national buildings shape the legacy of government and the way a nation is regarded through its built environment. Amidst an exceedingly globalized architectural practice and with the growing concern of key heritage foundations over the shortcomings of international modernism in representing its immediate socio-cultural context, the contextualization of public architecture within its sociological, cultural and economic framework in capital cities became the key denominator of this thesis. Civic architecture in capital cities is essential to confront the challenges of symbolizing a nation and demonstrating the legitimacy of the government'. In today's dominantly secular Western societies, governmental architecture, especially where the seat of political power lies, is the ultimate form of architectural expression in conveying a sense of identity and underlining a nation's status. Departing with these convictions, this thesis investigates the embodied symbolic power, the representative capacity, and the inherent permanence in contemporary architecture, and in its modes of production. Through a vast study on Modern architectural ideals and heritage -- in parallel to methodologies -- the thesis stimulates the future of large scale governmental building practices and aims to identify and index the key constituents that may respond to the lack representation in civic architecture in capital cities.

Software architecture evolution

DEFF Research Database (Denmark)

Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence

2008-01-01

Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution....... The software architect must modify multiple elements of the architecture manually, which risks introducing inconsistencies. This chapter provides an overview, comparison and detailed treatment of the various state-of-the-art approaches to describing and evolving software architectures. Furthermore, we discuss...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...

Design Principles for E-Government Architectures

Science.gov (United States)

Sandoz, Alain

The paper introduces a holistic approach for architecting systems which must sustain the entire e-government activity of a public authority. Four principles directly impact the architecture: Legality, Responsibility, Transparency, and Symmetry leading to coherent representations of the architecture for the client, the designer and the builder. The approach enables to deploy multipartite, distributed public services, including legal delegation of roles and outsourcing of non mandatory tasks through PPP.

Architectural design decisions

NARCIS (Netherlands)

Jansen, Antonius Gradus Johannes

2008-01-01

A software architecture can be considered as the collection of key decisions concerning the design of the software of a system. Knowledge about this design, i.e. architectural knowledge, is key for understanding a software architecture and thus the software itself. Architectural knowledge is mostly

A Generalized DRM Architectural Framework

Directory of Open Access Journals (Sweden)

PATRICIU, V. V.

2011-02-01

Full Text Available Online digital goods distribution environment lead to the need for a system to protect digital intellectual property. Digital Rights Management (DRM is the system born to protect and control distribution and use of those digital assets. The present paper is a review of the current state of DRM, focusing on architectural design, security technologies, and important DRM deployments. The paper primarily synthesizes DRM architectures within a general framework. We also present DRM ecosystem as providing a better understanding of what is currently happening to content rights management from a technological point of view. This paper includes conclusions of several DRM initiative studies, related to rights management systems with the purpose of identifying and describing the most significant DRM architectural models. The basic functions and processes of the DRM solutions are identified.

Electromagnetic Physics Models for Parallel Computing Architectures

International Nuclear Information System (INIS)

Amadio, G; Bianchini, C; Iope, R; Ananya, A; Apostolakis, J; Aurora, A; Bandieramonte, M; Brun, R; Carminati, F; Gheata, A; Gheata, M; Goulas, I; Nikitina, T; Bhattacharyya, A; Mohanty, A; Canal, P; Elvira, D; Jun, S Y; Lima, G; Duhem, L

2016-01-01

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part of the GeantV project. Results of preliminary performance evaluation and physics validation are presented as well. (paper)

One approach to architectural acoustics in education

Science.gov (United States)

Jaffe, J. Christopher

2003-04-01

In the fall of 1997, Dean Alan Balfour of the School of Architecture at the Rennselaer Polytechnic Institute asked me to introduce an undergraduate 14 credit certificate course entitled ''Sonics in Architecture.`` Subsequently, the program was expanded to include a Master's Degree in Building Science. This paper discusses the trials and tribulations of building a scientific program in a liberal arts school. In addition, the problem of acquiring the research funds needed to provide tuition assistance for graduate students in Architectural Acoustics is reviewed. Information on the curriculum developed for both the lecture and laboratory courses is provided. I will also share my concerns regarding the teaching methods currently prevalent in many schools of architecture today, and how building science professionals might assist in addressing these issues.

Architecture, design and protection of electrical distribution networks

Energy Technology Data Exchange (ETDEWEB)

Sorrel, J.P. [Schneider electric Industries SA (France)

2000-07-01

Architectures related to AII Electric Ship (AES) require high level of propulsion power. Merchant ships and obviously warships require a low vulnerability, a high reliability and availability, a simple maintainability as well as an ordinary ode of operation. These constraints converge to an optimum single line diagram. We will focus on the mode of operation of the network, its constraints, the facilities to use a ring distribution for the ship service distribution system, the earthing of HV network as well as future developments. (author)

Hydrothermal self-assembly of novel porous flower-like SnO_2 architecture and its application in ethanol sensor

International Nuclear Information System (INIS)

Jiang, X.H.; Ma, S.Y.; Sun, A.M.; Zhang, Z.M.; Jin, W.X.; Wang, T.T.; Li, W.Q.; Xu, X.L.; Luo, J.; Cheng, L.; Mao, Y.Z.; Zhang, M.

2015-01-01

Graphical abstract: - Highlights: • We have fabricated porous SnO_2 nanoflowers using a simple hydrothermal route. • The sensitivity of porous SnO_2 nanoflowers is about 208 for 500 ppm ethanol at 300 °C. • The porous SnO_2 nanoflowers could be a good candidate for fabricating effective ethanol sensor. - Abstract: Different morphologies of tin dioxide (SnO_2) architectures were prepared by increasing reaction time (12, 18, 24 and 48 h) under a facile hydrothermal process and followed by calcination. The crystal structures and morphologies of the hierarchical architecture were characterized in detail by means of powder X-ray diffraction (XRD), energy dispersive X-ray detector (EDX), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results showed that the porous flower-like SnO_2 architecture was obtained by 24 h hydrotherm treatment. Most importantly, the sensors based on porous flower-like SnO_2 architecture exhibited perfect sensing performance toward ethanol with excellent selectivity, high response and fast response-recovery capability compared with other SnO_2 nanoflowers for the same ethanol concentration at 300 °C. The response value was about 208 and the response-recovery time was around 8 and 7 s for 500 ppm ethanol, respectively. The enhancement in gas sensing properties was attributed to the unique structures, including the flower-like structure and porous feature, which provided more gas active center and diffusion pathways. The results indicated that porous flower-like SnO_2 architecture was a potential candidate for fabricating effective ethanol sensor. Furthermore, the possible growth mechanism and the ethanol sensing mechanism of the architecture were discussed, too.

Architecture Governance: The Importance of Architecture Governance for Achieving Operationally Responsive Ground Systems

Science.gov (United States)

Kolar, Mike; Estefan, Jeff; Giovannoni, Brian; Barkley, Erik

2011-01-01

Topics covered (1) Why Governance and Why Now? (2) Characteristics of Architecture Governance (3) Strategic Elements (3a) Architectural Principles (3b) Architecture Board (3c) Architecture Compliance (4) Architecture Governance Infusion Process. Governance is concerned with decision making (i.e., setting directions, establishing standards and principles, and prioritizing investments). Architecture governance is the practice and orientation by which enterprise architectures and other architectures are managed and controlled at an enterprise-wide level

Terpsichorean Architecture: Guest Editor’s Introduction

Directory of Open Access Journals (Sweden)

Tony Mitchell

2011-09-01

Full Text Available ‘Writing about music is like dancing about architecture – it’s a really stupid thing to want to do,’ is a statement usually attributed to Elvis Costello in Musician magazine No. 60 (October 1983, 52, which has long been quoted as evidence of the impossibility of writing adequately about the processes of producing and listening to music. Leaving aside the fact that Costello has denied he ever said it, and it has been mistakenly attributed to a number of other musicians over the years, including Laurie Anderson, David Byrne and Frank Zappa (who actually said ‘rock journalism is people who can't write, preparing stories based on interviews with people who can't talk, in order to amuse people who can't read’, this special journal issue sets out to prove the contrary. The papers in this special issue draw on evidence of the volume of important writing that exists about all forms of music, in academic, journalistic and creative fields, and discuss different ways in which music has been ‘translated’ into language. The English jazz writer Paul Savage, for example, describing the music of John Coltrane, refers to ‘a musical monument like that feat of terpsichorean architecture Giant Steps’. And in a 2004 issue of the Architectural Review (vol. 216, August entitled ‘Terpsichore and the Architects,’ Simon Goldhill notes that in ancient Greek theatre, ‘the chorus danced the architecture of the theatrical space into being’ and ‘the dancer was a storyteller whose body told a story, like a sculpture coming alive or a mobile embodiment of tradition.’ Choreographer Siobhan Davies speaks of the dancer building ‘an inner architecture with volume, texture and rhythm, which allows you to slice up space … Classical ballet and classical architecture share proportion, grandeur, and the idea of being at the centre of the universe … Light and acoustics are very important in dance and architecture: we have to consider how we introduce

A Router Architecture for Connection-Oriented Service Guarantees in the MANGO Clockless Network-on-Chip

DEFF Research Database (Denmark)

Bjerregaard, Tobias; Sparsø, Jens

2005-01-01

On-chip networks for future system-on-chip designs need simple, high performance implementations. In order to promote system-level integrity, guaranteed services (GS) need to be provided. We propose a network-on-chip (NoC) router architecture to support this, and demonstrate with a CMOS standard...... cell design. Our implementation is based on clockless circuit techniques, and thus inherently supports a modular, GALS-oriented design flow. Our router exploits virtual channels to provide connection-oriented GS, as well as connection-less best-effort (BE) routing. The architecture is highly flexible...

Architectural Narratives

DEFF Research Database (Denmark)

Kiib, Hans

2010-01-01

a functional framework for these concepts, but tries increasingly to endow the main idea of the cultural project with a spatially aesthetic expression - a shift towards “experience architecture.” A great number of these projects typically recycle and reinterpret narratives related to historical buildings......In this essay, I focus on the combination of programs and the architecture of cultural projects that have emerged within the last few years. These projects are characterized as “hybrid cultural projects,” because they intend to combine experience with entertainment, play, and learning. This essay...... and architectural heritage; another group tries to embed new performative technologies in expressive architectural representation. Finally, this essay provides a theoretical framework for the analysis of the political rationales of these projects and for the architectural representation bridges the gap between...

Nonlinear pattern formation in bone growth and architecture

Directory of Open Access Journals (Sweden)

Phil eSalmon

2015-01-01

Full Text Available The 3D morphology of bone arises through adaptation to its required engineering performance. Genetically and adaptively bone travels along a complex spatio-temporal trajectory to acquire optimal architecture. On a cellular, micro-anatomical scale, what mechanisms coordinate the activity of osteoblasts and osteoclasts to produce complex and efficient bone architectures? One mechanism is examined here – chaotic nonlinear pattern formation (NPF – which underlies in a unifying way natural structures as disparate as trabecular bone, swarms of birds flying, island formation, fluid turbulence and others. At the heart of NPF is the fact that simple rules operating between interacting elements, and Turing-like interaction between global and local signals, lead to complex and structured patterns. The study of group intelligence exhibited by swarming birds or shoaling fish has led to an embodiment of NPF called particle swarm optimization (PSO. This theoretical model could be applicable to the behavior of osteoblasts osteoclasts and osteocytes, seeing them operating socially in response simultaneously to both global and local signals (endocrine, cytokine, mechanical resulting in their clustered activity at formation and resorption sites. This represents problem-solving by social intelligence, and could potentially add further realism to in-silico simulation of bone modeling.What insights has NPF provided to bone biology? One example concerns the genetic disorder Juvenile Pagets Disease (JPD or Idiopathic Hyperphosphatasia, where the anomalous parallel trabecular architecture characteristic of this pathology is consistent with an NPF paradigm by analogy with known experimental NPF systems. Here coupling or feedback between osteoblasts and osteoclasts is the critical element.This NPF paradigm implies a profound link between bone regulation and its architecture: in bone the architecture is the regulation. The former is the emergent consequence of the

New Course Design: Classification Schemes and Information Architecture.

Science.gov (United States)

Weinberg, Bella Hass

2002-01-01

Describes a course developed at St. John's University (New York) in the Division of Library and Information Science that relates traditional classification schemes to information architecture and Web sites. Highlights include functional aspects of information architecture, that is, the way content is structured; assignments; student reactions; and…

Living in Style: A Guide to American Architecture.

Science.gov (United States)

Instructor, 1990

1990-01-01

Studying architectural styles is an exciting way to make history come alive and to help students feel a part of their community. This teacher's guide includes several classroom activities, a historical guide to American architectural styles, a list of resources, and a reproducible student worksheet. (IAH)

Multilayered and complex nanoparticle architectures through plasma synthesis

Energy Technology Data Exchange (ETDEWEB)

Phillips, Jonathan [Los Alamos National Laboratory; Wakeland, Stephen [UNM MECH.ENG.; Cui, Yuehua [UNM MECH.ENG.; Knapp, Angela [TOYOTA USA; Richard, Monique [TOYOTA USA; Luhrs, Claudia [UNM MECH.ENG.

2009-01-01

Using the Aerosol Through Plasma (ATP) method in conjunction with simple chemical techniques a variety of complex and novel nanoparticle architectures were created. A TP was used to make metal-core/carbon shell nanoparticles (ca. 50 nm diameter) of SnlCarbon and AI/Carbon. These have, respectively, potential for application as battery anode (for hybrid and electric vehicles) and high energy fuel In one example of post processing, the Sn-core/carbon-shell material is treated in acidic solution and yields a true nano-sized hollow carbon shell. These shells have potential application as catalyst supports, gas storage, a neutral buoyancy material for applications as varied as proppants, and slow release capsules for pharmaceutical or agricultural applications. A different set of post-A-T-P processes were used to make three layer nanoparticles with a metal core, graphite inner shell and ceramic outer shell. This method extends the range of achievable nanoparticles architectures, hence enabling new applications.

Examining the volume efficiency of the cortical architecture in a multi-processor network model.

Science.gov (United States)

Ruppin, E; Schwartz, E L; Yeshurun, Y

1993-01-01

The convoluted form of the sheet-like mammalian cortex naturally raises the question whether there is a simple geometrical reason for the prevalence of cortical architecture in the brains of higher vertebrates. Addressing this question, we present a formal analysis of the volume occupied by a massively connected network or processors (neurons) and then consider the pertaining cortical data. Three gross macroscopic features of cortical organization are examined: the segregation of white and gray matter, the circumferential organization of the gray matter around the white matter, and the folded cortical structure. Our results testify to the efficiency of cortical architecture.

Preserving urban objects of historicaland architectural heritage

Directory of Open Access Journals (Sweden)

Bal'zannikova Ekaterina Mikhailovna

2014-01-01

Full Text Available Large cities of central Russia were built under the influence of the factors that played an important role in protecting their population; natural resources and opportunities for trading were also essential. The industrial development and construction of large industrial facilities were significant for the formation of urban environment. As a result architectural monuments of great historical value that have a significant influence on the formation of the modern city image were preserved.Nowadays, a great number of buildings of historical and architectural heritage turned out to be in poor condition. Funding and its efficient use are rational means of saving the most valuable objects of historical and cultural heritage. In order to do this it is necessary to solve the problems of developing complex and effective measures for preserving these objectsThe existing method of preserving urban objects does not focus on urban architectural objects of historical and architectural value. It does not cover the study of urban development features in architectural and town-planning environment surrounding this object, it does not determine the historical and architectural value of the object and it does not identify the relationship of the object and the surrounding objects as well as architectural frame of the total area. That is why the existing method cannot be considered an appropriate system for preserving the objects of historical and architectural heritage.In order to avoid the disadvantages mentioned above and to increase tourist interest to the architecturally valuable buildings in urban areas, the author has proposed a complex approach to improve the method of reconstructing urban objects of great historical and architectural significance.The existing method of preserving historical objects includes the preparatory period of studying the degree of historical and architectural heritage wear and decay, developing the techniques for strengthening

A simple self-restored fiber Bragg grating (FBG)-based passive sensing ring network

International Nuclear Information System (INIS)

Yeh, Chien-Hung; Chow, Chi-Wai; Wang, Chia-Husan; Shih, Fu-Yuan; Wu, Yu-Fu; Chi, Sien

2009-01-01

In this investigation, we propose and experimentally investigate a simple self-restored fiber Bragg grating (FBG)-based sensor ring system. This proposed multi-ring passive sensing architecture does not require active components in the network. In this experiment, the network survivability and capacity for the multi-point sensor systems are also enhanced. Besides, the tunable laser source (TLS) is adopted in a central office (CO) for FBG sensing. The survivability of an eight-point FBG sensor is examined and analyzed. It is cost effective since the sensing system is entirely centralized in the CO. Experimental results show that the proposed system can enhance the reliability of the FBG sensing network for large-scale and multi-point architecture. (rapid communication)

Towards an autonomous sensor architecture for persistent area protection

Science.gov (United States)

Thomas, Paul A.; Marshall, Gillian F.; Stubbins, Daniel J.; Faulkner, David A.

2016-10-01

The majority of sensor installations for area protection (e.g. critical national infrastructure, military forward operating bases, etc.) make use of banks of screens each containing one or more sensor feeds, such that the burden of combining data from the various sources, understanding the situation, and controlling the sensors all lies with the human operator. Any automation in the system is generally heavily bespoke for the particular installation, leading to an inflexible system which is difficult to change or upgrade. We have developed a modular system architecture consisting of intelligent autonomous sensor modules, a high level decision making module, a middleware integration layer and an end-user GUI. The modules are all effectively "plug and play", and we have demonstrated that it is relatively simple to incorporate legacy sensors into the architecture. We have extended our previously-reported SAPIENT demonstration system to operate with a larger number and variety of sensor modules, over an extended area, detecting and classifying a wider variety of "threat activities", both vehicular and pedestrian. We report the results of a demonstration of the SAPIENT system containing multiple autonomous sensor modules with a range of modalities including laser scanners, radar, TI, EO, acoustic and seismic sensors. They operate from a combination of mains, generator and battery power, and communicate with the central "hub" over Ethernet, point-to-point wireless links and Wi-Fi. The system has been configured to protect an extended area in a complex semi-urban environment. We discuss the operation of the SAPIENT system in a realistic demonstration environment (which included significant activity not under trial control), showing sensor cueing, multi-modal sensor fusion, threat prioritisation and target hand-off.

Functional webs for freeform architecture

KAUST Repository

Deng, Bailin

2011-08-01

Rationalization and construction-aware design dominate the issue of realizability of freeform architecture. The former means the decomposition of an intended shape into parts which are sufficiently simple and efficient to manufacture; the latter refers to a design procedure which already incorporates rationalization. Recent contributions to this topic have been concerned mostly with small-scale parts, for instance with planar faces of meshes. The present paper deals with another important aspect, namely long-range parts and supporting structures. It turns out that from the pure geometry viewpoint this means studying families of curves which cover surfaces in certain well-defined ways. Depending on the application one has in mind, different combinatorial arrangements of curves are required. We here restrict ourselves to so-called hexagonal webs which correspond to a triangular or tri-hex decomposition of a surface. The individual curve may have certain special properties, like being planar, being a geodesic, or being part of a circle. Each of these properties is motivated by manufacturability considerations and imposes constraints on the shape of the surface. We investigate the available degrees of freedom, show numerical methods of optimization, and demonstrate the effectivity of our approach and the variability of construction solutions derived from webs by means of actual architectural designs.

Exporting Humanist Architecture

DEFF Research Database (Denmark)

Nielsen, Tom

2016-01-01

The article is a chapter in the catalogue for the Danish exhibition at the 2016 Architecture Biennale in Venice. The catalogue is conceived at an independent book exploring the theme Art of Many - The Right to Space. The chapter is an essay in this anthology tracing and discussing the different...... values and ethical stands involved in the export of Danish Architecture. Abstract: Danish architecture has, in a sense, been driven by an unwritten contract between the architects and the democratic state and its institutions. This contract may be viewed as an ethos – an architectural tradition...... with inherent aesthetic and moral values. Today, however, Danish architecture is also an export commodity. That raises questions, which should be debated as openly as possible. What does it mean for architecture and architects to practice in cultures and under political systems that do not use architecture...

Study on the contract characteristics of Internet architecture

Science.gov (United States)

Fu, Chuan; Zhang, Guoqing; Yang, Jing; Liu, Xiaona

2011-11-01

The importance of Internet architecture goes beyond the technical aspects. The architecture of Internet has a profound influence on the Internet-based economy in term of how the profits are shared by different market participants (Internet Server Provider, Internet Content Provider), since it is the physical foundation upon which the profit-sharing contracts are derived. In order to facilitate the continuing growth of the Internet, it is necessary to systematically study factors that curtail the Internet-based economy including the existing Internet architecture. In this paper, we used transaction cost economics and contract economics as new tools to analyse the contracts derived from the current Internet architecture. This study sheds light on how the macro characteristics of Internet architecture effect the microeconomical decisions of market participants. Based on the existing Internet architecture, we discuss the possibility of promoting Internet-based economy by encouraging user to connect their private stub network to the Internet and giving the user more right of self-governing.

Simple Screening Methods for Drought and Heat Tolerance in Cowpea

International Nuclear Information System (INIS)

Singh, B. B.

2000-10-01

Success in breeding for drought tolerance has not been as pronounced as for other traits. This is partly due to lack of simple, cheap and reliable screening methods to select drought tolerant plants/progenies from the segregating populations and partly due to complexity of factors involved in drought tolerance. Measuring drought tolerance through physiological parameters is expensive, time consuming and difficult to use for screening large numbers of lines and segregating populations. Since several factors/mechanisms (in shoot and root) operate independently and/or jointly to enable plants to cope with drought stress, drought tolerance appears as a complex trait. However, if these factors/mechanisms can be separated and studied individually, the components leading to drought tolerance will appear less complex and may be easy to manipulate by breeders. We have developed a simple box screening method for shoot drought tolerance in cowpea, which eliminates the effects of roots and permits non-destructive visual identification of shoot dehydration tolerance. We have also developed a 'root-box pin-board' method to study two dimensional root architecture of individual plants. Using these methods, we have identified two mechanisms of shoot drought tolerance in cowpea which are controlled by single dominant genes and major difference for root architecture among cowpea varieties. Combining deep and dense root system with shoot dehydration tolerance results into highly drought tolerant plants

Fragments of Architecture

DEFF Research Database (Denmark)

Bang, Jacob Sebastian

2016-01-01

Topic 3: “Case studies dealing with the artistic and architectural work of architects worldwide, and the ties between specific artistic and architectural projects, methodologies and products”......Topic 3: “Case studies dealing with the artistic and architectural work of architects worldwide, and the ties between specific artistic and architectural projects, methodologies and products”...

Fault-tolerant architecture: Evaluation methodology

International Nuclear Information System (INIS)

Battle, R.E.; Kisner, R.A.

1992-08-01

The design and reliability of four fault-tolerant architectures that may be used in nuclear power plant control systems were evaluated. Two architectures are variations of triple-modular-redundant (TMR) systems, and two are variations of dual redundant systems. The evaluation includes a review of methods of implementing fault-tolerant control, the importance of automatic recovery from failures, methods of self-testing diagnostics, block diagrams of typical fault-tolerant controllers, review of fault-tolerant controllers operating in nuclear power plants, and fault tree reliability analyses of fault-tolerant systems

Toward a Fault Tolerant Architecture for Vital Medical-Based Wearable Computing.

Science.gov (United States)

Abdali-Mohammadi, Fardin; Bajalan, Vahid; Fathi, Abdolhossein

2015-12-01

Advancements in computers and electronic technologies have led to the emergence of a new generation of efficient small intelligent systems. The products of such technologies might include Smartphones and wearable devices, which have attracted the attention of medical applications. These products are used less in critical medical applications because of their resource constraint and failure sensitivity. This is due to the fact that without safety considerations, small-integrated hardware will endanger patients' lives. Therefore, proposing some principals is required to construct wearable systems in healthcare so that the existing concerns are dealt with. Accordingly, this paper proposes an architecture for constructing wearable systems in critical medical applications. The proposed architecture is a three-tier one, supporting data flow from body sensors to cloud. The tiers of this architecture include wearable computers, mobile computing, and mobile cloud computing. One of the features of this architecture is its high possible fault tolerance due to the nature of its components. Moreover, the required protocols are presented to coordinate the components of this architecture. Finally, the reliability of this architecture is assessed by simulating the architecture and its components, and other aspects of the proposed architecture are discussed.

Enterprise architecture management

DEFF Research Database (Denmark)

Rahimi, Fatemeh; Gøtze, John; Møller, Charles

2017-01-01

Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise...... architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

Enterprise architecture management

DEFF Research Database (Denmark)

Rahimi, Fatemeh; Gøtze, John; Møller, Charles

2017-01-01

architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process......Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

Goethe among the Ancients: Nature and Architecture

Directory of Open Access Journals (Sweden)

Alberto Rubio Garrido

2018-04-01

Full Text Available During his trip to Sicily, a striking triad influenced Goethe. In the first place, a certain mythological predisposition presides over his descriptions. Second, he includes in his narration digressions about geology, geography, and botany. Finally, he dwells on detailed allusions to his artistic experiences, which include principally those related to architecture. As a result, Goethe combined in Sicily the experience of the ancient myth with the intimate conviction that feeling the natural and the Greek, as far as architecture is concerned, joins him to a meaning with validity in his time.

Monte Carlo simulations on SIMD computer architectures

International Nuclear Information System (INIS)

Burmester, C.P.; Gronsky, R.; Wille, L.T.

1992-01-01

In this paper algorithmic considerations regarding the implementation of various materials science applications of the Monte Carlo technique to single instruction multiple data (SIMD) computer architectures are presented. In particular, implementation of the Ising model with nearest, next nearest, and long range screened Coulomb interactions on the SIMD architecture MasPar MP-1 (DEC mpp-12000) series of massively parallel computers is demonstrated. Methods of code development which optimize processor array use and minimize inter-processor communication are presented including lattice partitioning and the use of processor array spanning tree structures for data reduction. Both geometric and algorithmic parallel approaches are utilized. Benchmarks in terms of Monte Carl updates per second for the MasPar architecture are presented and compared to values reported in the literature from comparable studies on other architectures

Remote observing from the bottom up: the architecture of the WIYN telescope control system

Science.gov (United States)

Percival, Jeffrey W.

1995-06-01

Remote observing has many definitions, ranging from unattended batch-mode use through simple remote logins to fully faithful off-site observing centers indistinguishable from the on- site telescope control room. There are problems with each of these ideas: batch mode operation, for example, precludes remote interactive target acquisition and remote access to targets of opportunity. Simple remote login suffers from network problems such as full-duplex character latency; shipping screens instead of the underlying data can cause bandwidth problems and interferes with analyzing or archiving data. Brute-force reproduction of the control room requires expensive fiber or satellite connections. The WIYN Telescope control system was designed to be inexpensive to build and inexpensive to maintain. We emphasized the use of standard tools, portable implementations, and network friendliness. These techniques and features are precisely those that underlie a powerful remote observing capability. The WIYN Telescope control system therefore supports remote observing from the very lowest levels, and does so effectively and inexpensively using a carefully planned architecture, standard software and network tools, and innovative methods to ship large digital images over low bandwidth connections such as phone lines. Even before the construction was complete, these techniques proved their value by allowing remote access for the purposes of eavesdropping, troubleshooting, and servo tuning. This paper presents a block diagram and detailed descriptions of the WIYN Telescope control system architecture. Each aspect of the control system is discussed with respect to its contribution to the overall goal of remote observing, including multi-user access, bandwidth conservation, interoperability, and portability.

TEACHING CAD PROGRAMMING TO ARCHITECTURE STUDENTS

Directory of Open Access Journals (Sweden)

Maria Gabriela Caffarena CELANI

2008-11-01

Full Text Available The objective of this paper is to discuss the relevance of including the discipline of computer programming in the architectural curriculum. To do so I start by explaining how computer programming has been applied in other educational contexts with pedagogical success, describing Seymour Papert's principles. After that, I summarize the historical development of CAD and provide three historical examples of educational applications of computer programming in architecture, followed by a contemporary case that I find of particular relevance. Next, I propose a methodology for teaching programming for architects that aims at improving the quality of designs by making their concepts more explicit. This methodology is based on my own experience teaching computer programming for architecture students at undergraduate and graduate levels at the State University of Campinas, Brazil. The paper ends with a discussion about the role of programming nowadays, when most CAD software are user-friendly and do not require any knowledge of programming for improving performance. I conclude that the introduction of programming in the CAD curriculum within a proper conceptual framework may transform the concept of architectural education. Key-words: Computer programming; computer-aided design; architectural education.

The architecture of Newton, a general-purpose dynamics simulator

Science.gov (United States)

Cremer, James F.; Stewart, A. James

1989-01-01

The architecture for Newton, a general-purpose system for simulating the dynamics of complex physical objects, is described. The system automatically formulates and analyzes equations of motion, and performs automatic modification of this system equations when necessitated by changes in kinematic relationships between objects. Impact and temporary contact are handled, although only using simple models. User-directed influence of simulations is achieved using Newton's module, which can be used to experiment with the control of many-degree-of-freedom articulated objects.

SASAgent: an agent based architecture for search, retrieval and composition of scientific models.

Science.gov (United States)

Felipe Mendes, Luiz; Silva, Laryssa; Matos, Ely; Braga, Regina; Campos, Fernanda

2011-07-01

Scientific computing is a multidisciplinary field that goes beyond the use of computer as machine where researchers write simple texts, presentations or store analysis and results of their experiments. Because of the huge hardware/software resources invested in experiments and simulations, this new approach to scientific computing currently adopted by research groups is well represented by e-Science. This work aims to propose a new architecture based on intelligent agents to search, recover and compose simulation models, generated in the context of research projects related to biological domain. The SASAgent architecture is described as a multi-tier, comprising three main modules, where CelO ontology satisfies requirements put by e-science projects mainly represented by the semantic knowledge base. Preliminary results suggest that the proposed architecture is promising to achieve requirements found in e-Science projects, considering mainly the biological domain. Copyright © 2011 Elsevier Ltd. All rights reserved.

Modeling Architectural Patterns’ Behavior Using Architectural Primitives

NARCIS (Netherlands)

Waqas Kamal, Ahmad; Avgeriou, Paris

2008-01-01

Architectural patterns have an impact on both the structure and the behavior of a system at the architecture design level. However, it is challenging to model patterns’ behavior in a systematic way because modeling languages do not provide the appropriate abstractions and because each pattern

Space and Architecture's Current Line of Research? A Lunar Architecture Workshop With An Architectural Agenda.

Science.gov (United States)

Solomon, D.; van Dijk, A.

The "2002 ESA Lunar Architecture Workshop" (June 3-16) ESTEC, Noordwijk, NL and V2_Lab, Rotterdam, NL) is the first-of-its-kind workshop for exploring the design of extra-terrestrial (infra) structures for human exploration of the Moon and Earth-like planets introducing 'architecture's current line of research', and adopting an architec- tural criteria. The workshop intends to inspire, engage and challenge 30-40 European masters students from the fields of aerospace engineering, civil engineering, archi- tecture, and art to design, validate and build models of (infra) structures for Lunar exploration. The workshop also aims to open up new physical and conceptual terrain for an architectural agenda within the field of space exploration. A sound introduc- tion to the issues, conditions, resources, technologies, and architectural strategies will initiate the workshop participants into the context of lunar architecture scenarios. In my paper and presentation about the development of the ideology behind this work- shop, I will comment on the following questions: * Can the contemporary architectural agenda offer solutions that affect the scope of space exploration? It certainly has had an impression on urbanization and colonization of previously sparsely populated parts of Earth. * Does the current line of research in architecture offer any useful strategies for com- bining scientific interests, commercial opportunity, and public space? What can be learned from 'state of the art' architecture that blends commercial and public pro- grammes within one location? * Should commercial 'colonisation' projects in space be required to provide public space in a location where all humans present are likely to be there in a commercial context? Is the wave in Koolhaas' new Prada flagship store just a gesture to public space, or does this new concept in architecture and shopping evolve the public space? * What can we learn about designing (infra-) structures on the Moon or any other

An Introduction to Architectural Surety(SM) Education

Energy Technology Data Exchange (ETDEWEB)

Matalucci, R.V.; Miyoshi, D.S.

1998-09-01

This report describes the Sandia activities in the developing field management approach to enhancing National Laboratories (Sandia) educational outreach of architectural and infrastructure surety, a risk the safety, security, and reliability of facilities, systems, and structures. It begins with a description of the field of architectural and infrastmcture surety, including Sandia's historical expertise and experience in nuclear weapons surety. An overview of the 1996 Sandia Workshop on Architectural SuretysM is then provided to reference the initiation of the various activities. This workshop established the need for a surety education program at the University level and recommended that Sandia develop the course material as soon as possible. Technical material was assembled and the course was offered at the University of New Mexico (UNM) during the 1997 spring semester. The bulk of this report accordingly summarizes the lecture material presented in this pioneering graduate-level course on Infrastructure Surety in the Civil Engineering Department at UNM. This groundbreaking class presented subject matter developed by experts from Sandia, and included additional information from guest lecturers from academia, government, and industry. Also included in this report are summaries of the term projects developed by the graduate students, an overview of the 1997 International Conference on Architectural Suretp: Assuring the Performance of Buildings and Injiastruchwes (co-sponsored by Sandia, the American Institute of Architects, and the American Society of Civil Engineers), and recommendations for further course work development. The U.S. Department of Energy provides support to this emerging field of architectural and infrastructure surety and recognizes its broad application to developing government, industry, and professional standards in the national interest.

Comparison Between Physics and Conventional Forceps in Simple Dental Extraction.

Science.gov (United States)

El-Kenawy, Mohamed H; Ahmed, Wael Mohamed Said

2015-12-01

Atraumatic dental extraction preserves bone, gingival architecture, and allows for the option of future or immediate dental implant placement. A number of tools and techniques have been proposed for minimally invasive tooth removal such as physics forceps. The biomechanical design of physics forceps decreases the incidence of root fracture, and maintains the buccal bone plate, which is essential for the proper healing of an immediately placed dental implant. This study was conducted to evaluate the efficacy of physics forceps versus conventional forceps in simple dental extraction. 200 adult patients seeking simple dental extraction were selected from the Outpatient Clinic in the Oral and Maxillofacial Surgery Department, Faculty of Dentistry, Mansoura University, Egypt. The selected patients were randomly allocated into two groups: group I: included 100 patients, in this group extraction was done using physics forceps, and group II: included 100 patients, in this group extraction was done using conventional forceps. In physics forceps group: crown fracture occurred in three cases (3 %), buccal bone fracture occurred in three cases (3 %), and root fracture occurred in 14 roots (8.5 %), while in conventional forceps group: crown fracture occurred in 10 cases (10 %), buccal bone fracture occurred in seven cases (7 %), and root fracture occurred in 27 roots (16.6 %). Physics forceps are innovative extraction instruments. By using them, it is possible to perform difficult extractions, with predictable results, and without need to reflect a flap. Using physics forceps decreases the incidence of crown, root, and buccal bone plate fractures, in comparison to the conventional forceps.

Towards a Classification of Architecture Initiatives: Outlining the External Factors

DEFF Research Database (Denmark)

Hansen, Christian Lindschou; Mortensen, Niels Henrik; Hvam, Lars

2012-01-01

or bad, without including the contextual differences. The purpose of the external factors is to improve scoping and goal setting of architecture initiatives, and improve comparability between- and transferability of knowledge from architecture initiatives. The external factors are a first step towards......This paper introduced a set of external factors capturing the contextual differences that set the stage for architecture initiatives. These are derived from a systems theoretical approach recognizing the fact that architecture initiatives should respond the challenges posed by the external...

Architecture and monument

Directory of Open Access Journals (Sweden)

Arjen Oosterman

2010-08-01

Full Text Available The relation between architectural history and heritage is ambiguous. Both domains are confronted with rapid changes in scale and complexity, leaving practitioners in both fields with the challenging task to provide new methods and a new vocabulary to enable research and communication. 70 years ago Nicolaus Pevsner could write about Lincoln cathedral and the bicycle shed to discern between architecture and building. These days not only housing and urban development have been accepted as ‘objects’ of research, in fact all material manifestation of human occupation, at least as far as design is involved, is considered worth studying. On the heritage side, developments are comparable: horizontally and vertically the domain has been enlarged tremendously: from a collection of ‘diamonds’ to complete cities, to landscapes and structures. This is not only true for scale and layers, but also for cultural norms of quality. Cultural relativism requires that ‘beauty’ and ‘quality’ are defined in relation to the social group or culture they refer to. The logic that an elite determines what is good and what is right is challenged by the notion that popular taste is in principle equal. So what does this do to our museum collections and lists of protected monuments? The consequences for architectural history are not yet clear. Including new realities like digital design and new fields of practice like the virtual, the knowledge base and toolbox of the architectural historian has to expand beyond the Renaissance ideal of the ‘uomo universale’.

A parallel VLSI architecture for a digital filter of arbitrary length using Fermat number transforms

Science.gov (United States)

Truong, T. K.; Reed, I. S.; Yeh, C. S.; Shao, H. M.

1982-01-01

A parallel architecture for computation of the linear convolution of two sequences of arbitrary lengths using the Fermat number transform (FNT) is described. In particular a pipeline structure is designed to compute a 128-point FNT. In this FNT, only additions and bit rotations are required. A standard barrel shifter circuit is modified so that it performs the required bit rotation operation. The overlap-save method is generalized for the FNT to compute a linear convolution of arbitrary length. A parallel architecture is developed to realize this type of overlap-save method using one FNT and several inverse FNTs of 128 points. The generalized overlap save method alleviates the usual dynamic range limitation in FNTs of long transform lengths. Its architecture is regular, simple, and expandable, and therefore naturally suitable for VLSI implementation.

A Survey on Next-generation Power Grid Data Architecture

Energy Technology Data Exchange (ETDEWEB)

You, Shutang [University of Tennessee, Knoxville (UTK); Zhu, Dr. Lin [University of Tennessee (UT); Liu, Yong [ORNL; Liu, Yilu [ORNL; Shankar, Mallikarjun (Arjun) [ORNL; Robertson, Russell [Grid Protection Alliance; King Jr, Thomas J [ORNL

2015-01-01

The operation and control of power grids will increasingly rely on data. A high-speed, reliable, flexible and secure data architecture is the prerequisite of the next-generation power grid. This paper summarizes the challenges in collecting and utilizing power grid data, and then provides reference data architecture for future power grids. Based on the data architecture deployment, related research on data architecture is reviewed and summarized in several categories including data measurement/actuation, data transmission, data service layer, data utilization, as well as two cross-cutting issues, interoperability and cyber security. Research gaps and future work are also presented.

Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

Science.gov (United States)

2005-04-01

PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

Design of a large remote seismic exploration data acquisition system, with the architecture of a distributed storage area network

International Nuclear Information System (INIS)

Cao, Ping; Song, Ke-zhu; Yang, Jun-feng; Ruan, Fu-ming

2011-01-01

Nowadays, seismic exploration data acquisition (DAQ) systems have been developed into remote forms with a large-scale coverage area. In this kind of application, some features must be mentioned. Firstly, there are many sensors which are placed remotely. Secondly, the total data throughput is high. Thirdly, optical fibres are not suitable everywhere because of cost control, harsh running environments, etc. Fourthly, the ability of expansibility and upgrading is a must for this kind of application. It is a challenge to design this kind of remote DAQ (rDAQ). Data transmission, clock synchronization, data storage, etc must be considered carefully. A fourth-hierarchy model of rDAQ is proposed. In this model, rDAQ is divided into four different function levels. From this model, a simple and clear architecture based on a distributed storage area network is proposed. rDAQs with this architecture have advantages of flexible configuration, expansibility and stability. This architecture can be applied to design and realize from simple single cable systems to large-scale exploration DAQs

SANDS: a service-oriented architecture for clinical decision support in a National Health Information Network.

Science.gov (United States)

Wright, Adam; Sittig, Dean F

2008-12-01

In this paper, we describe and evaluate a new distributed architecture for clinical decision support called SANDS (Service-oriented Architecture for NHIN Decision Support), which leverages current health information exchange efforts and is based on the principles of a service-oriented architecture. The architecture allows disparate clinical information systems and clinical decision support systems to be seamlessly integrated over a network according to a set of interfaces and protocols described in this paper. The architecture described is fully defined and developed, and six use cases have been developed and tested using a prototype electronic health record which links to one of the existing prototype National Health Information Networks (NHIN): drug interaction checking, syndromic surveillance, diagnostic decision support, inappropriate prescribing in older adults, information at the point of care and a simple personal health record. Some of these use cases utilize existing decision support systems, which are either commercially or freely available at present, and developed outside of the SANDS project, while other use cases are based on decision support systems developed specifically for the project. Open source code for many of these components is available, and an open source reference parser is also available for comparison and testing of other clinical information systems and clinical decision support systems that wish to implement the SANDS architecture. The SANDS architecture for decision support has several significant advantages over other architectures for clinical decision support. The most salient of these are:

Possible Simple Structures of the Universe to Include General Relativity Effects

Directory of Open Access Journals (Sweden)

Corneliu BERBENTE

2017-12-01

Full Text Available The general relativity describes the universe properties, the gravity playing a fundamental role. One uses a metric tensor in a Riemann space, g  , which should be in agreement with a mass (or energy tensor in order to satisfy the Einstein equation of the general relativity [1]. This equation contains the Ricci curvature as well. In general, applications are done considering that a chosen metric is valid without region limits. In fact, the density of the energy whose distribution is however unknown is variable in universe; therefore, the metrics need to be adapted to different regions. For this reason one suggests to start with a simple, average mass-energy distribution that could represent in a first step the actual universe. This suggestion is in agreement with the symmetrical distribution of equal spheres existing in a model of the early universe given by one of the authors. Two kinds of distribution are given. The possibility of black holes formation is studied and a criterion is given.

Information architecture. Volume 4: Vision

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The Vision document marks the transition from definition to implementation of the Department of Energy (DOE) Information Architecture Program. A description of the possibilities for the future, supported by actual experience with a process model and tool set, points toward implementation options. The directions for future information technology investments are discussed. Practical examples of how technology answers the business and information needs of the organization through coordinated and meshed data, applications, and technology architectures are related. This document is the fourth and final volume in the planned series for defining and exhibiting the DOE information architecture. The targeted scope of this document includes DOE Program Offices, field sites, contractor-operated facilities, and laboratories. This document paints a picture of how, over the next 7 years, technology may be implemented, dramatically improving the ways business is conducted at DOE. While technology is mentioned throughout this document, the vision is not about technology. The vision concerns the transition afforded by technology and the process steps to be completed to ensure alignment with business needs. This goal can be met if those directing the changing business and mission-support processes understand the capabilities afforded by architectural processes.

A new simple parameterization of daily clear-sky global solar radiation including horizon effects

International Nuclear Information System (INIS)

Lopez, Gabriel; Javier Batlles, F.; Tovar-Pescador, Joaquin

2007-01-01

Estimation of clear-sky global solar radiation is usually an important previous stage for calculating global solar radiation under all sky conditions. This is, for instance, a common procedure to derive incoming solar radiation from remote sensing or by using digital elevation models. In this work, we present a new model to calculate daily values of clear-sky global solar irradiation. The main goal is the simple parameterization in terms of atmospheric temperature and relative humidity, Angstroem's turbidity coefficient, ground albedo and site elevation, including a factor to take into account horizon obstructions. This allows us to obtain estimates even though a free horizon is not present as is the case of mountainous locations. Comparisons of calculated daily values with measured data show that this model is able to provide a good level of accurate estimates using either daily or mean monthly values of the input parameters. This new model has also been shown to improve daily estimates against those obtained using the clear-sky model from the European Solar Radiation Atlas and other accurate parameterized daily irradiation models. The introduction of Angstroem's turbidity coefficient and ground albedo should allow us to use the increasing worldwide aerosol information available and to consider those sites affected by snow covers in an easy and fast way. In addition, the proposed model is intended to be a useful tool to select clear-sky conditions

CONTEMPORARY SLOVENIAN TIMBER ARCHITECTURE INTERNATIONAL RECOGNIZED

Directory of Open Access Journals (Sweden)

Manja Kitek Kuzman

2014-12-01

Full Text Available The book presents Slovenia' s contemporary timber architecture. Thanks to its abundant forests, Slovenia has preserved the tradition of wood construction. As much as 60% of its surface is covered by forests. Slovenia is also the third most forested country in Europe. The high share of forest-covered surface allows for a sustainable production of high-quality wood. In the past, wood was used primarily in the construction of farm buildings, but now timber architecture is used for everything from residences and office buildings to public buildings such as community centres and schools. Timber construction is becoming increasingly popular. Apart from larger companies taking this approach, a great number of wooden houses have sprung up, built either on personal initiative or with the support of carpenter workshops. Slovenian timber architecture has taken a new approach to environmental and energy-efficiency problems and received great international recognition. The book discusses over fifty projects built over a ten-year period, and includes descriptions, photographs, and plans. The projects include residential areas, administration, and office, as well as tourist, educational, and industrial buildings. Timber architecture is presented as an integral part of the Slovenian landscape. The monograph will be useful to designers and future experts in their planning of optimal timber buildings and will highlight the main benefits of using timber construction.

Architectural freedom and industrialised architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...... to this systematic thinking of the building technique we get a diverse and functional architecture. Creating a new and clearer story telling about new and smart system based thinking behind the architectural expression....

Preemptive Architecture: Explosive Art and Future Architectures in Cursed Urban Zones

Directory of Open Access Journals (Sweden)

Stahl Stenslie

2017-04-01

Full Text Available This article describes the art and architectural research project Preemptive Architecture that uses artistic strategies and approaches to create bomb-ready architectural structures that act as instruments for the undoing of violence in war. Increasing environmental usability through destruction represents an inverse strategy that reverses common thinking patterns about warfare, art and architecture. Building structures predestined for a construc­tive destruction becomes a creative act. One of the main motivations behind this paper is to challenge and expand the material thinking as well as the socio-political conditions related to artistic, architectural and design based practices.   Article received: December 12, 2016; Article accepted: January 10, 2017; Published online: April 20, 2017 Original scholarly paper How to cite this article: Stenslie, Stahl, and Magne Wiggen. "Preemptive Architecture: Explosive Art and Future Architectures in Cursed Urban Zones." AM Journal of Art and Media Studies 12 (2017: 29-39. doi: 10.25038/am.v0i12.165

Enterprise architecture patterns practical solutions for recurring IT-architecture problems

CERN Document Server

Perroud, Thierry

2013-01-01

Every enterprise architect faces similar problems when designing and governing the enterprise architecture of a medium to large enterprise. Design patterns are a well-established concept in software engineering, used to define universally applicable solution schemes. By applying this approach to enterprise architectures, recurring problems in the design and implementation of enterprise architectures can be solved over all layers, from the business layer to the application and data layer down to the technology layer.Inversini and Perroud describe patterns at the level of enterprise architecture

MUF architecture /art London

DEFF Research Database (Denmark)

Svenningsen Kajita, Heidi

2009-01-01

Om MUF architecture samt interview med Liza Fior og Katherine Clarke, partnere i muf architecture/art......Om MUF architecture samt interview med Liza Fior og Katherine Clarke, partnere i muf architecture/art...

Software architecture and engineering for patient records: current and future.

Science.gov (United States)

Weng, Chunhua; Levine, Betty A; Mun, Seong K

2009-05-01

During the "The National Forum on the Future of the Defense Health Information System," a track focusing on "Systems Architecture and Software Engineering" included eight presenters. These presenters identified three key areas of interest in this field, which include the need for open enterprise architecture and a federated database design, net centrality based on service-oriented architecture, and the need for focus on software usability and reusability. The eight panelists provided recommendations related to the suitability of service-oriented architecture and the enabling technologies of grid computing and Web 2.0 for building health services research centers and federated data warehouses to facilitate large-scale collaborative health care and research. Finally, they discussed the need to leverage industry best practices for software engineering to facilitate rapid software development, testing, and deployment.

A cost-effective and serviceable ATLAST 9.2m telescope architecture

Science.gov (United States)

Feinberg, Lee D.; Jones, Andrew; Mosier, Gary; Rioux, Norman; Redding, Dave; Kienlen, Mike

2014-08-01

The ATLAST 9.2m architecture has evolved to be more cost effective while also meeting a more thorough understanding of the driving science requirements. The new approach can fit in an existing Delta IV Heavy rocket and makes extensive use of heritage and selective use of technology in order to minimize development time and cost. We have performed a more thorough look at how to meet the stability requirements for both thermal and dynamics and have an approach consistent with an initial error budget. In addition, we have developed concepts to support robotic or human servicing in a cost effective manner through a modular approach that relies on simple, external access and metrology. These refinements to the architecture enable a cost-effective, long-lifecycle, and relatively low risk approach to development.

Architecture and mathematics from antiquity to the future

CERN Document Server

2015-01-01

The aim of this collection of essays is to present a broad portrait of the ways in which two seemingly different disciplines are interconnected. The diversity and varied texture of the essays richly illustrates the affinity between architecture and mathematics. As the almost 100 papers presented in this two-volume publication show, every age and every culture has relied on principles of mathematics incorporated in their works of architecture to imbue their built environment with meaning and order. Included are discussions of geometry, proportional systems, linear algebra, periodic and aperiodic tilings, fractals, perspective, computer science and mechanics. Western architecture of every period is examined: Egyptian, Roman, Medieval, Renaissance, Baroque, Enlightenment, twentieth-century and beyond, as is the architecture of Turkey, China, India, Japan, Australia and Islam. The mathematical nature of the architecture of Leon Battista Alberti, Andrea Palladio and Frank Lloyd Wright is examined, and the philosop...

Clock generators for SOC processors circuits and architectures

CERN Document Server

Fahim, Amr

2004-01-01

This book explores the design of fully-integrated frequency synthesizers suitable for system-on-a-chip (SOC) processors. The text takes a more global design perspective in jointly examining the design space at the circuit level as well as at the architectural level. The comprehensive coverage includes summary chapters on circuit theory as well as feedback control theory relevant to the operation of phase locked loops (PLLs). On the circuit level, the discussion includes low-voltage analog design in deep submicron digital CMOS processes, effects of supply noise, substrate noise, as well device noise. On the architectural level, the discussion includes PLL analysis using continuous-time as well as discrete-time models, linear and nonlinear effects of PLL performance, and detailed analysis of locking behavior. The book provides numerous real world applications, as well as practical rules-of-thumb for modern designers to use at the system, architectural, as well as the circuit level.

VERNACULAR ARCHITECTURE: AN INTRODUCTORY COURSE TO LEARN ARCHITECTURE IN INDIA

Directory of Open Access Journals (Sweden)

Miki Desai

2010-07-01

Full Text Available “The object in view of both my predecessors in office and by myself has been rather to bring out the reasoning powers of individual students, so that they may understand the inner meaning of the old forms and their original function and may develop and modernize and gradually produce an architecture, Indian in character, but at the same time as suited to present day India as the old styles were to their own times and environment.” Claude Batley-1940; Lang, Desai, Desai, 1997 (p.143. The article introduces teaching philosophy, content and method of Basic Design I and II for first year students of architecture at the Faculty of Architecture, Centre for Environmental Planning and Technology (CEPT University, Ahmedabad, India. It is framed within the Indian perspective of architectural education from the British colonial times. Commencing with important academic literature and biases of the initial colonial period, it quickly traces architectural education in CEPT, the sixteenth school of post-independent India, set up in 1962, discussing the foundation year teaching imparted. The school was Modernist and avant-garde. The author introduced these two courses against the back drop of the Universalist Modernist credo of architecture and education. In the courses, the primary philosophy behind learning design emerges from heuristic method. The aim of the first course is seen as infusing interest in visual world, development of manual skills and dexterity through the dictum of ‘Look-feel-reason out-evaluate’ and ‘observe-record-interpret-synthesize transform express’. Due to the lack of architectural orientation in Indian schooling; the second course assumes vernacular architecture as a reasonable tool for a novice to understand the triangular relationship of society, architecture and physical context and its impact on design. The students are analytically exposed to the regional variety of architectures logically stemming from the geo

Architectural Surfaces and Structures from Circular Arcs

KAUST Repository

Shi, Ling

2013-12-01

In recent decades, the popularity of freeform shapes in contemporary architecture poses new challenges to digital design. One of them is the process of rationalization, i.e. to make freeform skins or structures affordable to manufacture, which draws the most attention from geometry researchers. In this thesis, we aim to realize this process with simple geometric primitives, circular arcs. We investigate architectural surfaces and structures consisting of circular arcs. Our focus is lying on how to employ them nicely and repetitively in architectural design, in order to decrease the cost in manufacturing. Firstly, we study Darboux cyclides, which are algebraic surfaces of order ≤ 4. We provide a computational tool to identify all families of circles on a given cyclide based on the spherical model of M ̈obius geometry. Practical ways to design cyclide patches that pass through certain inputs are presented. In particular, certain triples of circle families on Darboux cyclides may be suitably arranged as 3-webs. We provide a complete classification of all possible 3-webs of circles on Darboux cyclides. We then investigate the circular arc snakes, which are smooth sequences of circu- lar arcs. We evolve the snakes such that their curvature, as a function of arc length, remains unchanged. The evolution of snakes is utilized to approximate given surfaces by circular arcs or to generated freeform shapes, and it is realized by a 2-step pro- cess. More interestingly, certain 6-arc snake with boundary constraints can produce a smooth self motion, which can be employed to build flexible structures. Another challenging topic is approximating smooth freeform skins with simple panels. We contribute to this problem area by approximating a negatively-curved 5 surface with a smooth union of rational bilinear patches. We provide a proof for vertex consistency of hyperbolic nets using the CAGD approach of the rational B ́ezier form. Moreover, we use Darboux transformations for the

Architecture Descriptions. A Contribution to Modeling of Production System Architecture

DEFF Research Database (Denmark)

Jepsen, Allan Dam; Hvam, Lars

a proper understanding of the architecture phenomenon and the ability to describe it in a manner that allow the architecture to be communicated to and handled by stakeholders throughout the company. Despite the existence of several design philosophies in production system design such as Lean, that focus...... a diverse set of stakeholder domains and tools in the production system life cycle. To support such activities, a contribution is made to the identification and referencing of production system elements within architecture descriptions as part of the reference architecture framework. The contribution...

Architectural Guide of Jordan

DEFF Research Database (Denmark)

2016-01-01

Architectural and cultural guidebook for Jordan that also includes a view on the Syrian refugee situation, especially in the large UNHCR camp of Zaatari. The guide book is a preparatory study for a field trip our master studio undertook to the Hashemite Kingdom of Jordan in Fall 2016....

Non-linear pattern formation in bone growth and architecture.

Science.gov (United States)

Salmon, Phil

2014-01-01

The three-dimensional morphology of bone arises through adaptation to its required engineering performance. Genetically and adaptively bone travels along a complex spatiotemporal trajectory to acquire optimal architecture. On a cellular, micro-anatomical scale, what mechanisms coordinate the activity of osteoblasts and osteoclasts to produce complex and efficient bone architectures? One mechanism is examined here - chaotic non-linear pattern formation (NPF) - which underlies in a unifying way natural structures as disparate as trabecular bone, swarms of birds flying, island formation, fluid turbulence, and others. At the heart of NPF is the fact that simple rules operating between interacting elements, and Turing-like interaction between global and local signals, lead to complex and structured patterns. The study of "group intelligence" exhibited by swarming birds or shoaling fish has led to an embodiment of NPF called "particle swarm optimization" (PSO). This theoretical model could be applicable to the behavior of osteoblasts, osteoclasts, and osteocytes, seeing them operating "socially" in response simultaneously to both global and local signals (endocrine, cytokine, mechanical), resulting in their clustered activity at formation and resorption sites. This represents problem-solving by social intelligence, and could potentially add further realism to in silico computer simulation of bone modeling. What insights has NPF provided to bone biology? One example concerns the genetic disorder juvenile Pagets disease or idiopathic hyperphosphatasia, where the anomalous parallel trabecular architecture characteristic of this pathology is consistent with an NPF paradigm by analogy with known experimental NPF systems. Here, coupling or "feedback" between osteoblasts and osteoclasts is the critical element. This NPF paradigm implies a profound link between bone regulation and its architecture: in bone the architecture is the regulation. The former is the emergent

Enterprise Architecture in the Company Management Framework

Directory of Open Access Journals (Sweden)

Bojinov Bojidar Violinov

2016-11-01

Full Text Available The study aims to explore the role and importance of the concept of enterprise architecture in modern company management. For this purpose it clarifies the nature, scope, components of the enterprise architecture and relationships within it using the Zachman model. Based on the critical analysis of works by leading scientists, there presented a definition of enterprise architecture as a general description of all elements of strategic management of the company combined with description of its organizational, functional and operational structure, including the relationship between all tangible and intangible resources essential for its normal functioning and development. This in turn enables IT enterprise architecture to be defined as a set of corporate IT resources (hardware, software and technology, their interconnection and integration within the overall architecture of the company, as well as their formal description, methods and tools for their modeling and management in order to achieve strategic business goals of the organization. In conclusion the article summarizes the significance and role of enterprise architecture for strategic management of the company in today’s digital economy. The study underlines the importance of an integrated multidisciplinary approach to the work of a contemporary company, and the need for adequate matching and alignment of IT with business priorities and objectives of the company.

Architecture and Film

OpenAIRE

Mohammad Javaheri, Saharnaz

2016-01-01

Film does not exist without architecture. In every movie that has ever been made throughout history, the cinematic image of architecture is embedded within the picture. Throughout my studies and research, I began to see that there is no director who can consciously or unconsciously deny the use of architectural elements in his or her movies. Architecture offers a strong profile to distinguish characters and story. In the early days, films were shot in streets surrounde...

Microgrid cyber security reference architecture.

Energy Technology Data Exchange (ETDEWEB)

Veitch, Cynthia K.; Henry, Jordan M.; Richardson, Bryan T.; Hart, Derek H.

2013-07-01

This document describes a microgrid cyber security reference architecture. First, we present a high-level concept of operations for a microgrid, including operational modes, necessary power actors, and the communication protocols typically employed. We then describe our motivation for designing a secure microgrid; in particular, we provide general network and industrial control system (ICS)-speci c vulnerabilities, a threat model, information assurance compliance concerns, and design criteria for a microgrid control system network. Our design approach addresses these concerns by segmenting the microgrid control system network into enclaves, grouping enclaves into functional domains, and describing actor communication using data exchange attributes. We describe cyber actors that can help mitigate potential vulnerabilities, in addition to performance bene ts and vulnerability mitigation that may be realized using this reference architecture. To illustrate our design approach, we present a notional a microgrid control system network implementation, including types of communica- tion occurring on that network, example data exchange attributes for actors in the network, an example of how the network can be segmented to create enclaves and functional domains, and how cyber actors can be used to enforce network segmentation and provide the neces- sary level of security. Finally, we describe areas of focus for the further development of the reference architecture.

Architectural visualisation toolkit for 3D Studio Max users

OpenAIRE

Cooper , Neil

2012-01-01

Architectural Visualisation has become a vital part of the design process for architects and engineers. The process of modelling and rendering an architectural visualisation can be complex and time consuming with only a few tools available to assist novice modellers. This paper looks at available solutions for visualisation specialists including AutoCAD, 3D Studio Max and Google SketchUp as well as available solutions which attempt to automate the process including Batzal Roof ...

THE CASE FOR DAYLIGHTING IN ARCHITECTURE

Directory of Open Access Journals (Sweden)

Barrett Richard

2009-07-01

Full Text Available The paper discusses the reasons for using daylight in the design of architectural form and space. These reasons extend from those of a practical nature, including energy conservation, cost factors, and health and wellbeing, to those of a more intangible, aesthetic nature. Some historical precedents are offered as examples of projects in which designing to maximize daylighting was crucial in the mind of the architect. By contrast there is also discussion relating to the ‘the lost art’ of using natural lighting in architecture. Some of the reasons for this loss of conviction and expertise are considered. The place of national building codes and other statutory requirements is examined, as is the role of the architect and his/her relationship with other professionals involved in daylighting design in architecture.

Architectural geometry

KAUST Repository

Pottmann, Helmut

2014-11-26

Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural geometry, meanwhile contains a great wealth of individual contributions which are relevant in various fields. For mathematicians, the relation to discrete differential geometry is significant, in particular the integrable system viewpoint. Besides, new application contexts have become available for quite some old-established concepts. Regarding graphics and geometry processing, architectural geometry yields interesting new questions but also new objects, e.g. replacing meshes by other combinatorial arrangements. Numerical optimization plays a major role but in itself would be powerless without geometric understanding. Summing up, architectural geometry has become a rewarding field of study. We here survey the main directions which have been pursued, we show real projects where geometric considerations have played a role, and we outline open problems which we think are significant for the future development of both theory and practice of architectural geometry.

Architectural geometry

KAUST Repository

Pottmann, Helmut; Eigensatz, Michael; Vaxman, Amir; Wallner, Johannes

2014-01-01

Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural geometry, meanwhile contains a great wealth of individual contributions which are relevant in various fields. For mathematicians, the relation to discrete differential geometry is significant, in particular the integrable system viewpoint. Besides, new application contexts have become available for quite some old-established concepts. Regarding graphics and geometry processing, architectural geometry yields interesting new questions but also new objects, e.g. replacing meshes by other combinatorial arrangements. Numerical optimization plays a major role but in itself would be powerless without geometric understanding. Summing up, architectural geometry has become a rewarding field of study. We here survey the main directions which have been pursued, we show real projects where geometric considerations have played a role, and we outline open problems which we think are significant for the future development of both theory and practice of architectural geometry.

75 FR 5637 - Culturally Significant Objects Imported for Exhibition Determinations: “Architecture as Icon...

Science.gov (United States)

2010-02-03

... Determinations: ``Architecture as Icon: Perception and Representation of Architecture in Byzantine Art'' SUMMARY... objects to be included in the exhibition ``Architecture as Icon: Perception and Representation of Architecture in Byzantine Art,'' imported from abroad for temporary exhibition within the United States, are of...

Multicore technology architecture, reconfiguration, and modeling

CERN Document Server

Qadri, Muhammad Yasir

2013-01-01

The saturation of design complexity and clock frequencies for single-core processors has resulted in the emergence of multicore architectures as an alternative design paradigm. Nowadays, multicore/multithreaded computing systems are not only a de-facto standard for high-end applications, they are also gaining popularity in the field of embedded computing. The start of the multicore era has altered the concepts relating to almost all of the areas of computer architecture design, including core design, memory management, thread scheduling, application support, inter-processor communication, debu

Elements of Architecture

DEFF Research Database (Denmark)

Elements of Architecture explores new ways of engaging architecture in archaeology. It conceives of architecture both as the physical evidence of past societies and as existing beyond the physical environment, considering how people in the past have not just dwelled in buildings but have existed...

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2014-07-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means.In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

SULTAN HASSAN MOSQUE: AN ISLAMIC ARCHITECTURAL WONDER ANALYTICAL STUDY OF DESIGN AND ITS EFFECT ON ISLAMIC CAIRO

Directory of Open Access Journals (Sweden)

Kareem Adel Mohamed Kamal Ismail

2012-03-01

Full Text Available Cities in 21st century are losing identity due to globalization and rapid urbanism. However, great architectural buildings like Sultan Hassan Mosque Complex show us that great architectural wonders can keep this identity and can affect positively in society’s life. The simple aim of this study is to investigate the relationship between architectural features and Islamic meanings in modern world through studying the past. The study is mainly based on two main sources of data, literature review regarding historical part and site visit dealing with discussion of architectural features, uses and effect on surroundings society. Based on these sources, analysis was made based on matrix relationship between two sets of criteria, architectural parts (design, usage, location, artistic features, and mosque significance in Islam (prayer house, community center, center of knowledge, meeting place for shoura. Findings proved the existence of consequent relationship between Islam and architecture, as Islamic principles affect the design of the mosque in religious, social, and service aspects. Alternatively, architectural building satisfies all Muslim needs. This dual effect situation shapes recommend-dations like enhancement of the multidimensional use of the mosque, strengthen the community service role of the mosque, and developing design of modern mosques to fulfill Muslim requirements with 21st century measures and also endorse Islamic values through architecture.

Architectural design and analysis of a programmable image processor

International Nuclear Information System (INIS)

Siyal, M.Y.; Chowdhry, B.S.; Rajput, A.Q.K.

2003-01-01

In this paper we present an architectural design and analysis of a programmable image processor, nicknamed Snake. The processor was designed with a high degree of parallelism to speed up a range of image processing operations. Data parallelism found in array processors has been included into the architecture of the proposed processor. The implementation of commonly used image processing algorithms and their performance evaluation are also discussed. The performance of Snake is also compared with other types of processor architectures. (author)

Evaluation of urban infrastructure on the basis of architectural ...

African Journals Online (AJOL)

Landscape architecture, including expertise that despite the long history of its use in human life has not much experience in academia environments as an ... And creating reasonable rules for ecological planning and landscape architecture in order to establish the foundations for the future development of ecology design ...

AN ARCHITECTURAL ANALYSIS: THE MUSEUM OF CONTEMPORARY ART, TEHRAN, IRAN

Directory of Open Access Journals (Sweden)

Kambiz Navai

2010-03-01

Full Text Available Kamran Tabatabai Diba is one of Iranian Architects, whose works during 60’s and 70’s are well-known among architects and scholars. His works are mostly considered as examples of Modern Style, scented by Iranian Architecture. His efforts on creating public, socio-cultural centers in Iran was a result of his concern about social matters, as well as seeking for a national, contemporary Architecture. Tehran’s Museum of Contemporary Art is one of the most popular and well-known Diba’s works. In this article an effort has been made to get a better understanding of this remarkable piece of work, and to light up the Architect’s intents and the architectural methods he used to express them. The critique is concentrated mostly on two mentioned aspects of Diba’s works: “Integrating Modern Style and traditional Iranian Architecture”, and “Creating socio-cultural centers and institutions well related to society.” The Analysis is based on the most important features of every work of Architecture: “Space” and “Form”. The author seeks for the meaning by “watching” the whole complex carefully, “giving descriptive information” about it, and in the meantime “analyzing data” with the help of “basic design methods” together with the knowledge of “Modern Style”, “Characteristics of Late Modern Movement” and “Traditional Iranian Architecture.” Text is accompanied by drawings and figures, which help for better knowing the complex. The effort is made to use a simple language, understandable not only by Architects or scholars, but by every other interested non-specialist reader.

Sonographic ally Detected Architectural Distortion: Clinical Significance

Energy Technology Data Exchange (ETDEWEB)

Kim, Shin Kee; Seo, Bo Kyoung; Yi, Ann; Cha, Sang Hoon; Kim, Baek Hyun; Cho, Kyu Ran; Kim, Young Sik; Son, Gil Soo; Kim, Young Soo; Kim, Hee Young [Korea University Ansan Hospital, Ansan (Korea, Republic of)

2008-12-15

Architectural distortion is a suspicious abnormality for the diagnosis of breast cancer. The aim of this study was to investigate the clinical significance of sonographic ally detected architectural distortion. From January 2006 to June 2008, 20 patients were identified who had sonographic ally detected architectural distortions without a history of trauma or surgery and abnormal mammographic findings related to an architectural distortion. All of the lesions were pathologically verified. We evaluated the clinical and pathological findings and then assessed the clinical significance of the sonographic ally detected architectural distortions. Based on the clinical findings, one (5%) of the 20 patients had a palpable lump and the remaining 19 patients had no symptoms. No patient had a family history of breast cancer. Based on the pathological findings, three (15%) patients had malignancies. The malignant lesions included invasive ductal carcinomas (n = 2) and ductal carcinoma in situ (n = 1). Four (20%) patients had high-risk lesions: atypical ductal hyperplasia (n = 3) and lobular carcinoma in situ (n = 1). The remaining 13 (65%) patients had benign lesions, however, seven (35%) out of 13 patients had mild-risk lesions (three intraductal papillomas, three moderate or florid epithelial hyperplasia and one sclerosing adenosis). Of the sonographic ally detected architectural distortions, 35% were breast cancers or high-risk lesions and 35% were mild-risk lesions. Thus, a biopsy might be needed for an architectural distortion without an associated mass as depicted on breast ultrasound, even though the mammographic findings are normal

Sonographic ally Detected Architectural Distortion: Clinical Significance

International Nuclear Information System (INIS)

Kim, Shin Kee; Seo, Bo Kyoung; Yi, Ann; Cha, Sang Hoon; Kim, Baek Hyun; Cho, Kyu Ran; Kim, Young Sik; Son, Gil Soo; Kim, Young Soo; Kim, Hee Young

2008-01-01

Architectural distortion is a suspicious abnormality for the diagnosis of breast cancer. The aim of this study was to investigate the clinical significance of sonographic ally detected architectural distortion. From January 2006 to June 2008, 20 patients were identified who had sonographic ally detected architectural distortions without a history of trauma or surgery and abnormal mammographic findings related to an architectural distortion. All of the lesions were pathologically verified. We evaluated the clinical and pathological findings and then assessed the clinical significance of the sonographic ally detected architectural distortions. Based on the clinical findings, one (5%) of the 20 patients had a palpable lump and the remaining 19 patients had no symptoms. No patient had a family history of breast cancer. Based on the pathological findings, three (15%) patients had malignancies. The malignant lesions included invasive ductal carcinomas (n = 2) and ductal carcinoma in situ (n = 1). Four (20%) patients had high-risk lesions: atypical ductal hyperplasia (n = 3) and lobular carcinoma in situ (n = 1). The remaining 13 (65%) patients had benign lesions, however, seven (35%) out of 13 patients had mild-risk lesions (three intraductal papillomas, three moderate or florid epithelial hyperplasia and one sclerosing adenosis). Of the sonographic ally detected architectural distortions, 35% were breast cancers or high-risk lesions and 35% were mild-risk lesions. Thus, a biopsy might be needed for an architectural distortion without an associated mass as depicted on breast ultrasound, even though the mammographic findings are normal

Heterogeneous reconfigurable processors for real-time baseband processing from algorithm to architecture

CERN Document Server

Zhang, Chenxin; Öwall, Viktor

2016-01-01

This book focuses on domain-specific heterogeneous reconfigurable architectures, demonstrating for readers a computing platform which is flexible enough to support multiple standards, multiple modes, and multiple algorithms. The content is multi-disciplinary, covering areas of wireless communication, computing architecture, and circuit design. The platform described provides real-time processing capability with reasonable implementation cost, achieving balanced trade-offs among flexibility, performance, and hardware costs. The authors discuss efficient design methods for wireless communication processing platforms, from both an algorithm and architecture design perspective. Coverage also includes computing platforms for different wireless technologies and standards, including MIMO, OFDM, Massive MIMO, DVB, WLAN, LTE/LTE-A, and 5G. •Discusses reconfigurable architectures, including hardware building blocks such as processing elements, memory sub-systems, Network-on-Chip (NoC), and dynamic hardware reconfigur...

Architectural Theatricality

DEFF Research Database (Denmark)

Tvedebrink, Tenna Doktor Olsen

environments and a knowledge gap therefore exists in present hospital designs. Consequently, the purpose of this thesis has been to investigate if any research-based knowledge exist supporting the hypothesis that the interior architectural qualities of eating environments influence patient food intake, health...... and well-being, as well as outline a set of basic design principles ‘predicting’ the future interior architectural qualities of patient eating environments. Methodologically the thesis is based on an explorative study employing an abductive approach and hermeneutic-interpretative strategy utilizing tactics...... and food intake, as well as a series of references exist linking the interior architectural qualities of healthcare environments with the health and wellbeing of patients. On the basis of these findings, the thesis presents the concept of Architectural Theatricality as well as a set of design principles...

Architecture of Institution & Home. Architecture as Cultural Medium

NARCIS (Netherlands)

Robinson, J.W.

2004-01-01

This dissertation addresses how architecture functions as a cultural medium. It does so by by investigating how the architecture of institution and home each construct and support different cultural practices. By studying the design of ordinary settings in terms of how qualitative differences in

On Detailing in Contemporary Architecture

DEFF Research Database (Denmark)

Kristensen, Claus; Kirkegaard, Poul Henning

2010-01-01

Details in architecture have a significant influence on how architecture is experienced. One can touch the materials and analyse the detailing - thus details give valuable information about the architectural scheme as a whole. The absence of perceptual stimulation like details and materiality...... / tactility can blur the meaning of the architecture and turn it into an empty statement. The present paper will outline detailing in contemporary architecture and discuss the issue with respect to architectural quality. Architectural cases considered as sublime piece of architecture will be presented...

Power system data communication architecture at BC Hydro

Energy Technology Data Exchange (ETDEWEB)

Struyk, E.

2001-07-01

Development of a power system data communication architecture (PSDCA) at British Columbia Hydro that enables authorized corporate users to access station-intelligent electronic devices (IEDs) for power system data in non real-time, without compromising the reliability and availability of the real-time SCADA systems, is described. Also discussed is the development of major upgrade initiatives for expanding the use of intelligent electronic devices and remote terminal units (RTUs) which report to the main System Control Centre at Burnaby, BC, and to the four Area Control Centres located throughout the province. The network architecture that incorporates industry standards for PSDCA also provides an opportunity to existing network security systems against electronic threats such as hackers and saboteurs, beyond the simple methods of single or two-level passwords of existing protection control and monitoring equipment systems. The virtual private network (VPN) technology built into the PSDCA will allow secure access to station IED data by corporate users to access their own power data in a secure and reliable fashion. 4 figs.

Terra Harvest software architecture

Science.gov (United States)

Humeniuk, Dave; Klawon, Kevin

2012-06-01

Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

The TIM Barrel Architecture Facilitated the Early Evolution of Protein-Mediated Metabolism.

Science.gov (United States)

Goldman, Aaron David; Beatty, Joshua T; Landweber, Laura F

2016-01-01

The triosephosphate isomerase (TIM) barrel protein fold is a structurally repetitive architecture that is present in approximately 10% of all enzymes. It is generally assumed that this ubiquity in modern proteomes reflects an essential historical role in early protein-mediated metabolism. Here, we provide quantitative and comparative analyses to support several hypotheses about the early importance of the TIM barrel architecture. An information theoretical analysis of protein structures supports the hypothesis that the TIM barrel architecture could arise more easily by duplication and recombination compared to other mixed α/β structures. We show that TIM barrel enzymes corresponding to the most taxonomically broad superfamilies also have the broadest range of functions, often aided by metal and nucleotide-derived cofactors that are thought to reflect an earlier stage of metabolic evolution. By comparison to other putatively ancient protein architectures, we find that the functional diversity of TIM barrel proteins cannot be explained simply by their antiquity. Instead, the breadth of TIM barrel functions can be explained, in part, by the incorporation of a broad range of cofactors, a trend that does not appear to be shared by proteins in general. These results support the hypothesis that the simple and functionally general TIM barrel architecture may have arisen early in the evolution of protein biosynthesis and provided an ideal scaffold to facilitate the metabolic transition from ribozymes, peptides, and geochemical catalysts to modern protein enzymes.

Systemic Architecture

DEFF Research Database (Denmark)

Poletto, Marco; Pasquero, Claudia

-up or tactical design, behavioural space and the boundary of the natural and the artificial realms within the city and architecture. A new kind of "real-time world-city" is illustrated in the form of an operational design manual for the assemblage of proto-architectures, the incubation of proto-gardens...... and the coding of proto-interfaces. These prototypes of machinic architecture materialize as synthetic hybrids embedded with biological life (proto-gardens), computational power, behavioural responsiveness (cyber-gardens), spatial articulation (coMachines and fibrous structures), remote sensing (FUNclouds...

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2010-06-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisa­tion focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means. In this context, this sixth Footprint issue examines the influence of digital means as prag­matic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

An architecture for fault tolerant controllers

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Stoustrup, Jakob

2005-01-01

degradation in the sense of guaranteed degraded performance. A number of fault diagnosis problems, fault tolerant control problems, and feedback control with fault rejection problems are formulated/considered, mainly from a fault modeling point of view. The method is illustrated on a servo example including......A general architecture for fault tolerant control is proposed. The architecture is based on the (primary) YJBK parameterization of all stabilizing compensators and uses the dual YJBK parameterization to quantify the performance of the fault tolerant system. The approach suggested can be applied...

Architecture and Stages

DEFF Research Database (Denmark)

Kiib, Hans

2009-01-01

as "experiencescape" - a space between tourism, culture, learning and economy. Strategies related to these challenges involve new architectural concepts and art as ‘engines' for a change. New expressive architecture and old industrial buildings are often combined into hybrid narratives, linking the past...... with the future. But this is not enough. The agenda is to develop architectural spaces, where social interaction and learning are enhanced by art and fun. How can we develop new architectural designs in our inner cities and waterfronts where eventscapes, learning labs and temporal use are merged with everyday...

Architecture in Its Own Shadow

Directory of Open Access Journals (Sweden)

Alexander Rappaport

2016-11-01

Full Text Available Those who consider themselves architects disapprove of the statements about destruction of the subject of architectural culture, profession and of the subject of architectural theory. At the same time, a deep crisis of both theory and practice is obvious. When theorists of architecture of the 20th and early 21st centuries turned to the subjects external to architecture – sociology, psychology, semiotics, ecology, post-structuralist criticism, etc., instead of enriching and renovating the architectural theory, the results were just the opposite. A brand new and independent paradigm of architecture is needed. It should contain three parts specific by their logical-subject nature: ontology of architecture, methodology of architectural thought and axiology of architectural thought.

Framework for Architecture Trade Study Using MBSE and Performance Simulation

Science.gov (United States)

Ryan, Jessica; Sarkani, Shahram; Mazzuchim, Thomas

2012-01-01

Increasing complexity in modern systems as well as cost and schedule constraints require a new paradigm of system engineering to fulfill stakeholder needs. Challenges facing efficient trade studies include poor tool interoperability, lack of simulation coordination (design parameters) and requirements flowdown. A recent trend toward Model Based System Engineering (MBSE) includes flexible architecture definition, program documentation, requirements traceability and system engineering reuse. As a new domain MBSE still lacks governing standards and commonly accepted frameworks. This paper proposes a framework for efficient architecture definition using MBSE in conjunction with Domain Specific simulation to evaluate trade studies. A general framework is provided followed with a specific example including a method for designing a trade study, defining candidate architectures, planning simulations to fulfill requirements and finally a weighted decision analysis to optimize system objectives.

Context Aware Middleware Architectures: Survey and Challenges

Directory of Open Access Journals (Sweden)

Xin Li

2015-08-01

Full Text Available Context aware applications, which can adapt their behaviors to changing environments, are attracting more and more attention. To simplify the complexity of developing applications, context aware middleware, which introduces context awareness into the traditional middleware, is highlighted to provide a homogeneous interface involving generic context management solutions. This paper provides a survey of state-of-the-art context aware middleware architectures proposed during the period from 2009 through 2015. First, a preliminary background, such as the principles of context, context awareness, context modelling, and context reasoning, is provided for a comprehensive understanding of context aware middleware. On this basis, an overview of eleven carefully selected middleware architectures is presented and their main features explained. Then, thorough comparisons and analysis of the presented middleware architectures are performed based on technical parameters including architectural style, context abstraction, context reasoning, scalability, fault tolerance, interoperability, service discovery, storage, security & privacy, context awareness level, and cloud-based big data analytics. The analysis shows that there is actually no context aware middleware architecture that complies with all requirements. Finally, challenges are pointed out as open issues for future work.

A MCIN-based architecture of smart agriculture

Directory of Open Access Journals (Sweden)

Xiang Gu

2017-09-01

Full Text Available Purpose – Material conscious and information network (MCIN is a kind of cyber physics social system. This paper aims to study the MCIN modeling method and design the MCIN-based architecture of smart agriculture (MCIN-ASA which is different from current vertical architecture and involves production, management and commerce. Architecture is composed of three MCIN-ASA participants which are MCIN-ASA enterprises, individuals and commodity. Design/methodology/approach – Architecture uses enterprises and individuals personalized portals as the carriers which are linked precisely with each other through a peer-to-peer network called six-degrees-of-separation block-chain. The authors want to establish a self-organization, open and ecological operational system which includes active, personalized consumption, direct, centralized distribution, distributed and smart production. Findings – The paper models three main MCIN-ASA participants, namely, design the smart supply, demand and management functions, which show the feasibility innovation and high efficiency of implementing MCIN on agriculture. At the same time, the paper presents a prototype system based on the architecture. Originality/value – The authors think that MCIN-ASA improves current agriculture greatly and inspires a lot in production-marketing-combined electronic commerce.

Business process architectures: overview, comparison and framework

Science.gov (United States)

Dijkman, Remco; Vanderfeesten, Irene; Reijers, Hajo A.

2016-02-01

With the uptake of business process modelling in practice, the demand grows for guidelines that lead to consistent and integrated collections of process models. The notion of a business process architecture has been explicitly proposed to address this. This paper provides an overview of the prevailing approaches to design a business process architecture. Furthermore, it includes evaluations of the usability and use of the identified approaches. Finally, it presents a framework for business process architecture design that can be used to develop a concrete architecture. The use and usability were evaluated in two ways. First, a survey was conducted among 39 practitioners, in which the opinion of the practitioners on the use and usefulness of the approaches was evaluated. Second, four case studies were conducted, in which process architectures from practice were analysed to determine the approaches or elements of approaches that were used in their design. Both evaluations showed that practitioners have a preference for using approaches that are based on reference models and approaches that are based on the identification of business functions or business objects. At the same time, the evaluations showed that practitioners use these approaches in combination, rather than selecting a single approach.

Cloud Based Big Data Infrastructure: Architectural Components and Automated Provisioning

OpenAIRE

Demchenko, Yuri; Turkmen, Fatih; Blanchet, Christophe; Loomis, Charles; Laat, Caees de

2016-01-01

This paper describes the general architecture and functional components of the cloud based Big Data Infrastructure (BDI). The proposed BDI architecture is based on the analysis of the emerging Big Data and data intensive technologies and supported by the definition of the Big Data Architecture Framework (BDAF) that defines the following components of the Big Data technologies: Big Data definition, Data Management including data lifecycle and data structures, Big Data Infrastructure (generical...

An Architectural Modelfor Intelligent Network Management

Institute of Scientific and Technical Information of China (English)

罗军舟; 顾冠群; 费翔

2000-01-01

Traditional network management approach involves the management of each vendor's equipment and network segment in isolation through its own proprietary element management system. It is necessary to set up a new network management architecture that calls for operation consolidation across vendor and technology boundaries. In this paper, an architectural model for Intelligent Network Management (INM) is presented. The INM system includes a manager system, which controls all subsystems and coordinates different management tasks; an expert system, which is responsible for handling particularly difficult problems, and intelligent agents, which bring the management closer to applications and user requirements by spreading intelligent agents through network segments or domain. In the expert system model proposed, especially an intelligent fault management system is given.The architectural model is to build the INM system to meet the need of managing modern network systems.

Medical Data Architecture Project Status

Science.gov (United States)

Krihak, M.; Middour, C.; Gurram, M.; Wolfe, S.; Marker, N.; Winther, S.; Ronzano, K.; Bolles, D.; Toscano, W.; Shaw, T.

2018-01-01

The Medical Data Architecture (MDA) project supports the Exploration Medical Capability (ExMC) risk to minimize or reduce the risk of adverse health outcomes and decrements in performance due to in-flight medical capabilities on human exploration missions. To mitigate this risk, the ExMC MDA project addresses the technical limitations identified in ExMC Gap Med 07: We do not have the capability to comprehensively process medically-relevant information to support medical operations during exploration missions. This gap identifies that the current in-flight medical data management includes a combination of data collection and distribution methods that are minimally integrated with on-board medical devices and systems. Furthermore, there are a variety of data sources and methods of data collection. For an exploration mission, the seamless management of such data will enable a more medically autonomous crew than the current paradigm. The medical system requirements are being developed in parallel with the exploration mission architecture and vehicle design. ExMC has recognized that in order to make informed decisions about a medical data architecture framework, current methods for medical data management must not only be understood, but an architecture must also be identified that provides the crew with actionable insight to medical conditions. This medical data architecture will provide the necessary functionality to address the challenges of executing a self-contained medical system that approaches crew health care delivery without assistance from ground support. Hence, the products supported by current prototype development will directly inform exploration medical system requirements.

Architectural technology

DEFF Research Database (Denmark)

2005-01-01

The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...

Humanizing Architecture

DEFF Research Database (Denmark)

Toft, Tanya Søndergaard

2015-01-01

The article proposes the urban digital gallery as an opportunity to explore the relationship between ‘human’ and ‘technology,’ through the programming of media architecture. It takes a curatorial perspective when proposing an ontological shift from considering media facades as visual spectacles...... agency and a sense of being by way of dematerializing architecture. This is achieved by way of programming the symbolic to provide new emotional realizations and situations of enlightenment in the public audience. This reflects a greater potential to humanize the digital in media architecture....

Robotic architectures

CSIR Research Space (South Africa)

Mtshali, M

2010-01-01

Full Text Available In the development of mobile robotic systems, a robotic architecture plays a crucial role in interconnecting all the sub-systems and controlling the system. The design of robotic architectures for mobile autonomous robots is a challenging...

Security Policy for a Generic Space Exploration Communication Network Architecture

Science.gov (United States)

Ivancic, William D.; Sheehe, Charles J.; Vaden, Karl R.

2016-01-01

This document is one of three. It describes various security mechanisms and a security policy profile for a generic space-based communication architecture. Two other documents accompany this document- an Operations Concept (OpsCon) and a communication architecture document. The OpsCon should be read first followed by the security policy profile described by this document and then the architecture document. The overall goal is to design a generic space exploration communication network architecture that is affordable, deployable, maintainable, securable, evolvable, reliable, and adaptable. The architecture should also require limited reconfiguration throughout system development and deployment. System deployment includes subsystem development in a factory setting, system integration in a laboratory setting, launch preparation, launch, and deployment and operation in space.

PLURALITY AND DIVERSITY IN ARCHITECTURAL AND URBAN RESEARCH

Directory of Open Access Journals (Sweden)

Ashraf M. Salama

2017-07-01

Full Text Available Demonstrating the essence of the journal as a truly international platform that covers issues of interest and concern to the global academic and professional community, this issue of Archnet-IJAR, volume 11, issue # 2, July 2017 includes various topics that manifest plurality and diversity as inherent qualities of architectural and urban research published in the journal.  Topics include architectural education and design studio teaching, urban and rural slums, heritage and historic environments in various contexts, participatory planning and the charrette process, assessment of public spaces and plazas, and human perception of the built environment. These topics are debated and analytically discussed within cities, settlements, and urban environments in Bahrain, Bangladesh, California-USA, Libya, Scotland, and Spain. The issue also includes three papers selected from the Fifth Architectural Jordanian International Conference – 1-3 November 2016, which uniquely speak to the context of Jordan and the wider Middle East. The edition ends with a book review that highlights emerging issues related to border landscapes and social ecologies.

The Walk-Man Robot Software Architecture

Directory of Open Access Journals (Sweden)

Mirko Ferrati

2016-05-01

Full Text Available A software and control architecture for a humanoid robot is a complex and large project, which involves a team of developers/researchers to be coordinated and requires many hard design choices. If such project has to be done in a very limited time, i.e., less than 1 year, more constraints are added and concepts, such as modular design, code reusability, and API definition, need to be used as much as possible. In this work, we describe the software architecture developed for Walk-Man, a robot participant at the Darpa Robotics Challenge. The challenge required the robot to execute many different tasks, such as walking, driving a car, and manipulating objects. These tasks need to be solved by robotics specialists in their corresponding research field, such as humanoid walking, motion planning, or object manipulation. The proposed architecture was developed in 10 months, provided boilerplate code for most of the functionalities required to control a humanoid robot and allowed robotics researchers to produce their control modules for DRC tasks in a short time. Additional capabilities of the architecture include firmware and hardware management, mixing of different middlewares, unreliable network management, and operator control station GUI. All the source code related to the architecture and some control modules have been released as open source projects.

Collaborative production indicators in information architecture

Directory of Open Access Journals (Sweden)

Zayr Claudio Gomes da Silva

2017-04-01

Full Text Available Information architecture is considered a strategic domain of collaborative production of Information Science. We describe the conditions of collaborative production in information architecture, considering it a sub-area of the study of Information Science. In order to do so, we specifically address indicators of scientific production that include topics of study, typology and authorship, postgraduate programs and areas to which it is linked, among others. This is an exploratory and descriptive research. The scientific production of the National Meeting of Information Science Research (ENANCIB, from 2003 to 2013, is mapped in the "Network Matters" repository. Bibliometry is used to identify paratextual and textual elements that form evidence of collaborative production in information architecture. We verified the plurality in the academic formation of the researchers that approach information architecture, the sharing of languages, some indications of the disciplinary convergences from the collaboration in coauthorship, as well as a plexus of relations through the indirect citations that represent the sharing of elements Theoretical-methodological approaches in interdisciplinary production. In addition, the academic training of the researchers with the highest productivity index is mainly related to Librarianship and Computer Science. The collaborative production in the information architecture is presented as a multidisciplinary production process, constituting a convergent domain that allows the effectiveness of interdisciplinary practices in Information Science.

Architecture Sustainability

NARCIS (Netherlands)

Avgeriou, Paris; Stal, Michael; Hilliard, Rich

2013-01-01

Software architecture is the foundation of software system development, encompassing a system's architects' and stakeholders' strategic decisions. A special issue of IEEE Software is intended to raise awareness of architecture sustainability issues and increase interest and work in the area. The

Effect of Ceramic Scaffold Architectural Parameters on Biological Response

Directory of Open Access Journals (Sweden)

Maria Isabella eGariboldi

2015-10-01

Full Text Available Numerous studies have focused on the optimization of ceramic architectures to fulfill a variety of scaffold functional requirements and improve biological response. Conventional fabrication techniques, however, do not allow for the production of geometrically controlled, reproducible structures and often fail to allow the independent variation of individual geometric parameters. Current developments in additive manufacturing technologies suggest that 3D printing will allow a more controlled and systematic exploration of scaffold architectures. This more direct translation of design into structure requires a pipeline for design-driven optimization. A theoretical framework for systematic design and evaluation of architectural parameters on biological response is presented. Four levels of architecture are considered, namely (1 surface topography, (2 pore size and geometry, (3 porous networks and (4 macroscopic pore arrangement, including the potential for spatially varied architectures. Studies exploring the effect of various parameters within these levels are reviewed. This framework will hopefully allow uncovering of new relationships between architecture and biological response in a more systematic way, as well as inform future refinement of fabrication techniques to fulfill architectural necessities with a consideration of biological implications.

Architectural development of an advanced EVA Electronic System

Science.gov (United States)

Lavelle, Joseph

1992-01-01

An advanced electronic system for future EVA missions (including zero gravity, the lunar surface, and the surface of Mars) is under research and development within the Advanced Life Support Division at NASA Ames Research Center. As a first step in the development, an optimum system architecture has been derived from an analysis of the projected requirements for these missions. The open, modular architecture centers around a distributed multiprocessing concept where the major subsystems independently process their own I/O functions and communicate over a common bus. Supervision and coordination of the subsystems is handled by an embedded real-time operating system kernel employing multitasking software techniques. A discussion of how the architecture most efficiently meets the electronic system functional requirements, maximizes flexibility for future development and mission applications, and enhances the reliability and serviceability of the system in these remote, hostile environments is included.

Feedback control architecture and the bacterial chemotaxis network.

Directory of Open Access Journals (Sweden)

Abdullah Hamadeh

2011-05-01

Full Text Available Bacteria move towards favourable and away from toxic environments by changing their swimming pattern. This response is regulated by the chemotaxis signalling pathway, which has an important feature: it uses feedback to 'reset' (adapt the bacterial sensing ability, which allows the bacteria to sense a range of background environmental changes. The role of this feedback has been studied extensively in the simple chemotaxis pathway of Escherichia coli. However it has been recently found that the majority of bacteria have multiple chemotaxis homologues of the E. coli proteins, resulting in more complex pathways. In this paper we investigate the configuration and role of feedback in Rhodobacter sphaeroides, a bacterium containing multiple homologues of the chemotaxis proteins found in E. coli. Multiple proteins could produce different possible feedback configurations, each having different chemotactic performance qualities and levels of robustness to variations and uncertainties in biological parameters and to intracellular noise. We develop four models corresponding to different feedback configurations. Using a series of carefully designed experiments we discriminate between these models and invalidate three of them. When these models are examined in terms of robustness to noise and parametric uncertainties, we find that the non-invalidated model is superior to the others. Moreover, it has a 'cascade control' feedback architecture which is used extensively in engineering to improve system performance, including robustness. Given that the majority of bacteria are known to have multiple chemotaxis pathways, in this paper we show that some feedback architectures allow them to have better performance than others. In particular, cascade control may be an important feature in achieving robust functionality in more complex signalling pathways and in improving their performance.

Architecture-independent power bound for vibration energy harvesters

International Nuclear Information System (INIS)

Halvorsen, E; Le, C P; Mitcheson, P D; Yeatman, E M

2013-01-01

The maximum output power of energy harvesters driven by harmonic vibrations is well known for a range of specific harvester architectures. An architecture-independent bound based on the mechanical input-power also exists and gives a strict limit on achievable power with one mechanical degree of freedom, but is a least upper bound only for lossless devices. We report a new theoretical bound on the output power of vibration energy harvesters that includes parasitic, linear mechanical damping while still being architecture independent. This bound greatly improves the previous bound at moderate force amplitudes and is compared to the performance of established harvester architectures which are shown to agree with it in limiting cases. The bound is a hard limit on achievable power with one mechanical degree of freedom and can not be circumvented by transducer or power-electronic-interface design

Expanding color design methods for architecture and allied disciplines

Science.gov (United States)

Linton, Harold E.

2002-06-01

The color design processes of visual artists, architects, designers, and theoreticians included in this presentation reflect the practical role of color in architecture. What the color design professional brings to the architectural design team is an expertise and rich sensibility made up of a broad awareness and a finely tuned visual perception. This includes a knowledge of design and its history, expertise with industrial color materials and their methods of application, an awareness of design context and cultural identity, a background in physiology and psychology as it relates to human welfare, and an ability to problem-solve and respond creatively to design concepts with innovative ideas. The broadening of the definition of the colorists's role in architectural design provides architects, artists and designers with significant opportunities for continued professional and educational development.

ARCHITECTURE OF WEB BASED COMPUTER-AIDED MANUFACTURING SYSTEM

Directory of Open Access Journals (Sweden)

N. E. Filyukov

2014-09-01

Full Text Available The paper deals with design of a web-based system for Computer-Aided Manufacturing (CAM. Remote applications and databases located in the "private cloud" are proposed to be the basis of such system. The suggested approach contains: service - oriented architecture, using web applications and web services as modules, multi-agent technologies for implementation of information exchange functions between the components of the system and the usage of PDM - system for managing technology projects within the CAM. The proposed architecture involves CAM conversion into the corporate information system that will provide coordinated functioning of subsystems based on a common information space, as well as parallelize collective work on technology projects and be able to provide effective control of production planning. A system has been developed within this architecture which gives the possibility for a rather simple technological subsystems connect to the system and implementation of their interaction. The system makes it possible to produce CAM configuration for a particular company on the set of developed subsystems and databases specifying appropriate access rights for employees of the company. The proposed approach simplifies maintenance of software and information support for CAM subsystems due to their central location in the data center. The results can be used as a basis for CAM design and testing within the learning process for development and modernization of the system algorithms, and then can be tested in the extended enterprise.

Influence of Architectural Features and Styles on Various Acoustical Measures in Churches

Science.gov (United States)

Carvalho, Antonio Pedro Oliveira De.

This work reports on acoustical field measurements made in a major survey of 41 Catholic churches in Portugal that were built in the last 14 centuries. A series of monaural and binaural acoustical measurements was taken at multiple source/receiver positions in each church using the impulse response with noise burst method. The acoustical measures were Reverberation Time (RT), Early Decay Time (EDT), Clarity (C80), Definition (D), Center Time (TS), Loudness (L), Bass Ratios based on the Reverberation Time and Loudness rm (BR_-RT and rm BR_-L), Rapid Speech Transmission Index (RASTI), and the binaural Coherence (COH). The scope of this research is to investigate how the acoustical performance of Catholic churches relates to their architectural features and to determine simple formulas to predict acoustical measures by the use of elementary architectural parameters. Prediction equations were defined among the acoustical measures to estimate values at individual locations within each room as well as the mean values in each church. Best fits with rm R^2~0.9 were not uncommon among many of the measures. Within and interchurch differences in the data for the acoustical measures were also analyzed. The variations of RT and EDT were identified as much smaller than the variations of the other measures. The churches tested were grouped in eight architectural styles, and the effect of their evolution through time on these acoustical measures was investigated. Statistically significant differences were found regarding some architectural styles that can be traced to historical changes in Church history, especially to the Reformation period. Prediction equations were defined to estimate mean acoustical measures by the use of fifteen simple architectural parameters. The use of the Sabine and Eyring reverberation time equations was tested. The effect of coupled spaces was analyzed, and a new algorithm for the application of the Sabine equation was developed, achieving an average of

ETL as a Necessity for Business Architectures

Directory of Open Access Journals (Sweden)

Aurelian TITIRISCA

2013-07-01

Full Text Available Today, the new trend that companies are following is to digitalize all data they have in order to reduce costs with physical space and better handle data volume. The new era, the era of bundling data sources and huge volumes of data continues this decade also. In all industries, companies are starting to understand and appreciate the value of data, the value that these volumes of data can produce. Companies are collecting huge volumes of data but not always the actual solution for business intelligence (BI can handle these volumes. To obtain information, those volumes of data are analyzed with extract-transform-load (ETL software solutions. Companies, in the current economic context, are finding hard to invest in improvements of BI process including in ETL process. In this paper I will demonstrate why this kind of investment is necessary and also I will demonstrate that ETL process must be included in BI and big data architectures. In the following pages I will refer to business architectures as BI and big data architectures.

Information Integration Architecture Development

OpenAIRE

Faulkner, Stéphane; Kolp, Manuel; Nguyen, Duy Thai; Coyette, Adrien; Do, Thanh Tung; 16th International Conference on Software Engineering and Knowledge Engineering

2004-01-01

Multi-Agent Systems (MAS) architectures are gaining popularity for building open, distributed, and evolving software required by systems such as information integration applications. Unfortunately, despite considerable work in software architecture during the last decade, few research efforts have aimed at truly defining patterns and languages for designing such multiagent architectures. We propose a modern approach based on organizational structures and architectural description lan...

Architectural Contestation

NARCIS (Netherlands)

Merle, J.

2012-01-01

This dissertation addresses the reductive reading of Georges Bataille's work done within the field of architectural criticism and theory which tends to set aside the fundamental ‘broken’ totality of Bataille's oeuvre and also to narrowly interpret it as a mere critique of architectural form,

Information architecture. Volume 3: Guidance

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

The purpose of this document, as presented in Volume 1, The Foundations, is to assist the Department of Energy (DOE) in developing and promulgating information architecture guidance. This guidance is aimed at increasing the development of information architecture as a Departmentwide management best practice. This document describes departmental information architecture principles and minimum design characteristics for systems and infrastructures within the DOE Information Architecture Conceptual Model, and establishes a Departmentwide standards-based architecture program. The publication of this document fulfills the commitment to address guiding principles, promote standard architectural practices, and provide technical guidance. This document guides the transition from the baseline or defacto Departmental architecture through approved information management program plans and budgets to the future vision architecture. This document also represents another major step toward establishing a well-organized, logical foundation for the DOE information architecture.

Research and Design in Unified Coding Architecture for Smart Grids

Directory of Open Access Journals (Sweden)

Gang Han

2013-09-01

Full Text Available Standardized and sharing information platform is the foundation of the Smart Grids. In order to improve the dispatching center information integration of the power grids and achieve efficient data exchange, sharing and interoperability, a unified coding architecture is proposed. The architecture includes coding management layer, coding generation layer, information models layer and application system layer. Hierarchical design makes the whole coding architecture to adapt to different application environments, different interfaces, loosely coupled requirements, which can realize the integration model management function of the power grids. The life cycle and evaluation method of survival of unified coding architecture is proposed. It can ensure the stability and availability of the coding architecture. Finally, the development direction of coding technology of the Smart Grids in future is prospected.

Software architecture as a set of architectural design decisions

NARCIS (Netherlands)

Jansen, Anton; Bosch, Jan; Nord, R; Medvidovic, N; Krikhaar, R; Khrhaar, R; Stafford, J; Bosch, J

2006-01-01

Software architectures have high costs for change, are complex, and erode during evolution. We believe these problems are partially due to knowledge vaporization. Currently, almost all the knowledge and information about the design decisions the architecture is based on are implicitly embedded in

Advanced connection systems for architectural glazing

CERN Document Server

Afghani Khoraskani, Roham

2015-01-01

This book presents the findings of a detailed study to explore the behavior of architectural glazing systems during and after an earthquake and to develop design proposals that will mitigate or even eliminate the damage inflicted on these systems. The seismic behavior of common types of architectural glazing systems are investigated and causes of damage to each system, identified. Furthermore, depending on the geometrical and structural characteristics, the ultimate horizontal load capacity of glass curtain wall systems is defined based on the stability of the glass components. Detailed attention is devoted to the incorporation of advanced connection devices between the structure of the building and the building envelope system in order to minimize the damage to glazed components. An innovative new connection device is introduced that results in a delicate and functional system easily incorporated into different architectural glazing systems, including those demanding maximum transparency.

The architectural design of networks of protein domain architectures.

Science.gov (United States)

Hsu, Chia-Hsin; Chen, Chien-Kuo; Hwang, Ming-Jing

2013-08-23

Protein domain architectures (PDAs), in which single domains are linked to form multiple-domain proteins, are a major molecular form used by evolution for the diversification of protein functions. However, the design principles of PDAs remain largely uninvestigated. In this study, we constructed networks to connect domain architectures that had grown out from the same single domain for every single domain in the Pfam-A database and found that there are three main distinctive types of these networks, which suggests that evolution can exploit PDAs in three different ways. Further analysis showed that these three different types of PDA networks are each adopted by different types of protein domains, although many networks exhibit the characteristics of more than one of the three types. Our results shed light on nature's blueprint for protein architecture and provide a framework for understanding architectural design from a network perspective.

EZ-Rhizo software: the gateway to root architecture analysis.

Science.gov (United States)

Armengaud, Patrick

2009-02-01

Plants are sessile organisms that have to cope with the available nutritional resources and environmental constraints in the place where they germinate. To fully exploit their nearby resources, they have evolved a highly plastic and responsive root system. Adaptations to limited nutrients include a wide range of specific root responses, e.g., the emergence of new root types, root branching or specific growth of lateral roots. These root system architecture (RSA) features are of utmost importance when investigating the underlying mechanisms by forward, reverse or quantitative genetic approaches. The EZ-Rhizo software was developed to facilitate such root measurements in a fast, simple and accurate way. The performances of EZ-Rhizo in providing about 20 primary and derived RSA parameters were illustrated by looking at natural variability across 23 Arabidopsis accessions. The different RSA profiles obtained from plants grown in favorable condition illustrated the wide reservoir of natural genetic resources underlying specific features of root growth. This diversity was used here to correlate the RSA genetic variability with growth, development and environmental properties of accession origins.

The fractal dimension of architecture

CERN Document Server

Ostwald, Michael J

2016-01-01

Fractal analysis is a method for measuring, analysing and comparing the formal or geometric properties of complex objects. In this book it is used to investigate eighty-five buildings that have been designed by some of the twentieth-century’s most respected and celebrated architects. Including designs by Le Corbusier, Eileen Gray, Frank Lloyd Wright, Robert Venturi, Frank Gehry, Peter Eisenman, Richard Meier and Kazuyo Sejima amongst others, this book uses mathematics to analyse arguments and theories about some of the world’s most famous designs. Starting with 625 reconstructed architectural plans and elevations, and including more than 200 specially prepared views of famous buildings, this book presents the results of the largest mathematical study ever undertaken into architectural design and the largest single application of fractal analysis presented in any field. The data derived from this study is used to test three overarching hypotheses about social, stylistic and personal trends in design, along...

Design studio as a life space in architectural education: privacy requirements

OpenAIRE

Demirbaş, Özgen Osman

1997-01-01

Ankara : The Department of Interior Architecture and Environmental Design and the Institute of Fine Arts of Bilkent Univ., 1997. Thesis (Master's) -- Bilkent University, 1997. Includes bibliographical refences. There is a very important relationship between the educational outcomes and the architectural design of educational facilities. The most commonly used space in an architectural education is the design studio. Therefore, it is claimed that there should be a living process in a ...

System architecture of communication infrastructures for PPDR organisations

Science.gov (United States)

Müller, Wilmuth

2017-04-01

The growing number of events affecting public safety and security (PS and S) on a regional scale with potential to grow up to large scale cross border disasters puts an increased pressure on organizations responsible for PS and S. In order to respond timely and in an adequate manner to such events Public Protection and Disaster Relief (PPDR) organizations need to cooperate, align their procedures and activities, share the needed information and be interoperable. Existing PPDR/PMR technologies do not provide broadband capability, which is a major limitation in supporting new services hence new information flows and currently they have no successor. There is also no known standard that addresses interoperability of these technologies. The paper at hands provides an approach to tackle the above mentioned aspects by defining an Enterprise Architecture (EA) of PPDR organizations and a System Architecture of next generation PPDR communication networks for a variety of applications and services on broadband networks, including the ability of inter-system, inter-agency and cross-border operations. The Open Safety and Security Architecture Framework (OSSAF) provides a framework and approach to coordinate the perspectives of different types of stakeholders within a PS and S organization. It aims at bridging the silos in the chain of commands and on leveraging interoperability between PPDR organizations. The framework incorporates concepts of several mature enterprise architecture frameworks including the NATO Architecture Framework (NAF). However, OSSAF is not providing details on how NAF should be used for describing the OSSAF perspectives and views. In this contribution a mapping of the NAF elements to the OSSAF views is provided. Based on this mapping, an EA of PPDR organizations with a focus on communication infrastructure related capabilities is presented. Following the capability modeling, a system architecture for secure and interoperable communication infrastructures

Information Architecture: Notes toward a New Curriculum.

Science.gov (United States)

Latham, Don

2002-01-01

Considers the evolution of information architectures as a field of professional education. Topics include the need for an interdisciplinary approach; balancing practical skills with theoretical concepts; and key content areas, including information organization, graphic design, computer science, user and usability studies, and communication.…

A Simple GPU-Accelerated Two-Dimensional MUSCL-Hancock Solver for Ideal Magnetohydrodynamics

Science.gov (United States)

Bard, Christopher; Dorelli, John C.

2013-01-01

We describe our experience using NVIDIA's CUDA (Compute Unified Device Architecture) C programming environment to implement a two-dimensional second-order MUSCL-Hancock ideal magnetohydrodynamics (MHD) solver on a GTX 480 Graphics Processing Unit (GPU). Taking a simple approach in which the MHD variables are stored exclusively in the global memory of the GTX 480 and accessed in a cache-friendly manner (without further optimizing memory access by, for example, staging data in the GPU's faster shared memory), we achieved a maximum speed-up of approx. = 126 for a sq 1024 grid relative to the sequential C code running on a single Intel Nehalem (2.8 GHz) core. This speedup is consistent with simple estimates based on the known floating point performance, memory throughput and parallel processing capacity of the GTX 480.

Emerging technology and architecture for big-data analytics

CERN Document Server

Chang, Chip; Yu, Hao

2017-01-01

This book describes the current state of the art in big-data analytics, from a technology and hardware architecture perspective. The presentation is designed to be accessible to a broad audience, with general knowledge of hardware design and some interest in big-data analytics. Coverage includes emerging technology and devices for data-analytics, circuit design for data-analytics, and architecture and algorithms to support data-analytics. Readers will benefit from the realistic context used by the authors, which demonstrates what works, what doesn’t work, and what are the fundamental problems, solutions, upcoming challenges and opportunities. Provides a single-source reference to hardware architectures for big-data analytics; Covers various levels of big-data analytics hardware design abstraction and flow, from device, to circuits and systems; Demonstrates how non-volatile memory (NVM) based hardware platforms can be a viable solution to existing challenges in hardware architecture for big-data analytics.

GNC Architecture Design for ARES Simulation. Revision 3.0. Revision 3.0

Science.gov (United States)

Gay, Robert

2006-01-01

The purpose of this document is to describe the GNC architecture and associated interfaces for all ARES simulations. Establishing a common architecture facilitates development across the ARES simulations and provides an efficient mechanism for creating an end-to-end simulation capability. In general, the GNC architecture is the frame work in which all GNC development takes place, including sensor and effector models. All GNC software applications have a standard location within the architecture making integration easier and, thus more efficient.

Energy and architecture. [Denmark]; Energi + arkitektur

Energy Technology Data Exchange (ETDEWEB)

Lehrskov, H. [Ingenioerhoejskolen i Aarhus, Aarhus (Denmark); Oehlenschlaeger, R. [AplusB, Aarhus (Denmark); Kappel, K. [Solar City Copenhagen, Copenhagen (Denmark); Kleis, B. [Arkitekturformidling.dk, Vanloese (Denmark); Klint, J. [Kuben Management, Aarhus (Denmark); Vejsig Pedersen, P. [Cenergia, Herlev (Denmark)

2011-07-01

The book presents the best examples of Danish energy-oriented architecture with a focus on architectural and energy measures in the integrated design process, resulting in architectural quality. The book consists of two parts and consists first of an introduction to the challenges and tools within low-energy buildings, and then a catalog of a wide range of building projects in the categories of housing, business, education, institutions and sports. The book contains examples of new buildings that as a minimum meet the requirements of the building codes LE1, BR08. The book also contains suggestions for renovation projects that meet LE2 BR08, as the energy optimization of the existing building stock is an imminent task with great constructional and aesthetic challenges. The selected projects are designed and built in the period 2009 to 2011 and include both everyday architecture, created under highly competitive economic environment, as more exclusive development projects. The objectives of the projects are often higher than required by the building code, and in many projects measurements were made to find out what works. These examples show that the stricter energy requirements can serve as inspiration for a holistic architecture and contribute to a paradigm shift in the cooperation process between the project parties. But it is also clear that it requires a focused commitment of all players in the construction industry - clients, consultants, contractors and building product manufacturers - to reduce energy consumption significantly. (LN)

Physics Detector Simulation Facility (PDSF) architecture/utilization

International Nuclear Information System (INIS)

Scipioni, B.

1993-05-01

The current systems architecture for the SSCL's Physics Detector Simulation Facility (PDSF) is presented. Systems analysis data is presented and discussed. In particular, these data disclose the effectiveness of utilization of the facility for meeting the needs of physics computing, especially as concerns parallel architecture and processing. Detailed design plans for the highly networked, symmetric, parallel, UNIX workstation-based facility are given and discussed in light of the design philosophy. Included are network, CPU, disk, router, concentrator, tape, user and job capacities and throughput

ATCA for Machines-- Advanced Telecommunications Computing Architecture

Energy Technology Data Exchange (ETDEWEB)

Larsen, R.S.; /SLAC

2008-04-22

The Advanced Telecommunications Computing Architecture is a new industry open standard for electronics instrument modules and shelves being evaluated for the International Linear Collider (ILC). It is the first industrial standard designed for High Availability (HA). ILC availability simulations have shown clearly that the capabilities of ATCA are needed in order to achieve acceptable integrated luminosity. The ATCA architecture looks attractive for beam instruments and detector applications as well. This paper provides an overview of ongoing R&D including application of HA principles to power electronics systems.

Memory architecture

NARCIS (Netherlands)

2012-01-01

A memory architecture is presented. The memory architecture comprises a first memory and a second memory. The first memory has at least a bank with a first width addressable by a single address. The second memory has a plurality of banks of a second width, said banks being addressable by components

Recreation of architectural structures using procedural modeling based on volumes

Directory of Open Access Journals (Sweden)

Santiago Barroso Juan

2013-11-01

Full Text Available While the procedural modeling of buildings and other architectural structures has evolved very significantly in recent years, there is noticeable absence of high-level tools that allow a designer, an artist or an historian, creating important buildings or architectonic structures in a particular city. In this paper we present a tool for creating buildings in a simple and clear, following rules that use the language and methodology of creating their own buildings, and hiding the user the algorithmic details of the creation of the model.

High-performance, scalable optical network-on-chip architectures

Science.gov (United States)

Tan, Xianfang

The rapid advance of technology enables a large number of processing cores to be integrated into a single chip which is called a Chip Multiprocessor (CMP) or a Multiprocessor System-on-Chip (MPSoC) design. The on-chip interconnection network, which is the communication infrastructure for these processing cores, plays a central role in a many-core system. With the continuously increasing complexity of many-core systems, traditional metallic wired electronic networks-on-chip (NoC) became a bottleneck because of the unbearable latency in data transmission and extremely high energy consumption on chip. Optical networks-on-chip (ONoC) has been proposed as a promising alternative paradigm for electronic NoC with the benefits of optical signaling communication such as extremely high bandwidth, negligible latency, and low power consumption. This dissertation focus on the design of high-performance and scalable ONoC architectures and the contributions are highlighted as follow: 1. A micro-ring resonator (MRR)-based Generic Wavelength-routed Optical Router (GWOR) is proposed. A method for developing any sized GWOR is introduced. GWOR is a scalable non-blocking ONoC architecture with simple structure, low cost and high power efficiency compared to existing ONoC designs. 2. To expand the bandwidth and improve the fault tolerance of the GWOR, a redundant GWOR architecture is designed by cascading different type of GWORs into one network. 3. The redundant GWOR built with MRR-based comb switches is proposed. Comb switches can expand the bandwidth while keep the topology of GWOR unchanged by replacing the general MRRs with comb switches. 4. A butterfly fat tree (BFT)-based hybrid optoelectronic NoC (HONoC) architecture is developed in which GWORs are used for global communication and electronic routers are used for local communication. The proposed HONoC uses less numbers of electronic routers and links than its counterpart of electronic BFT-based NoC. It takes the advantages of

The Rhetoric of Campus Architecture

Science.gov (United States)

Smith, Cynthia Duquette

2016-01-01

The group activity described in this article was originally designed for an upper-division undergraduate course on Rhetoric and Architecture, but would also be well suited for courses in Persuasion, Rhetorical Criticism, or Visual Rhetoric. Any undergraduate course related to communication and design (including Advertising) could make excellent…

An OER Architecture Framework: Need and Design

Directory of Open Access Journals (Sweden)

Pankaj Khanna

2013-03-01

Full Text Available This paper describes an open educational resources (OER architecture framework that would bring significant improvements in a well-structured and systematic way to the educational practices of distance education institutions of India. The OER architecture framework is articulated with six dimensions: pedagogical, technological, managerial, academic, financial, and ethical. These dimensions are structured with the component areas of relevance: IT infrastructure services, management support systems, open content development and maintenance, online teaching-learning, and learner assessment and evaluation of the OER architecture framework. An OER knowledge and information base, including a web portal, is proposed in the form of a series of knowledge repositories. This system would not only streamline the delivery of distance education but also would enhance the quality of distance learning through the development of high quality e-content, instructional processes, course/programme content development, IT infrastructure, and network systems. Thus the proposed OER architecture framework when implemented in the distance education system (DES of India would improve the quality of distance education and also increase its accessibility in a well-organised and structured way.

Can You Hear Architecture

DEFF Research Database (Denmark)

Ryhl, Camilla

2016-01-01

Taking an off set in the understanding of architectural quality being based on multisensory architecture, the paper aims to discuss the current acoustic discourse in inclusive design and its implications to the integration of inclusive design in architectural discourse and practice as well...... as the understanding of user needs. The paper further points to the need to elaborate and nuance the discourse much more, in order to assure inclusion to the many users living with a hearing impairment or, for other reasons, with a high degree of auditory sensitivity. Using the authors’ own research on inclusive...... design and architectural quality for people with a hearing disability and a newly conducted qualitative evaluation research in Denmark as well as architectural theories on multisensory aspects of architectural experiences, the paper uses examples of existing Nordic building cases to discuss the role...

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael

2010-07-25

The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael

2010-07-26

The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.

Tutorial on architectural acoustics

Science.gov (United States)

Shaw, Neil; Talaske, Rick; Bistafa, Sylvio

2002-11-01

This tutorial is intended to provide an overview of current knowledge and practice in architectural acoustics. Topics covered will include basic concepts and history, acoustics of small rooms (small rooms for speech such as classrooms and meeting rooms, music studios, small critical listening spaces such as home theatres) and the acoustics of large rooms (larger assembly halls, auditoria, and performance halls).

Vital architecture, slow momentum policy

DEFF Research Database (Denmark)

Braae, Ellen Marie

2010-01-01

A reflection on the relation between Danish landscape architecture policy and the statements made through current landscape architectural project.......A reflection on the relation between Danish landscape architecture policy and the statements made through current landscape architectural project....

Photo-Modeling and Cloud Computing. Applications in the Survey of Late Gothic Architectural Elements

Science.gov (United States)

Casu, P.; Pisu, C.

2013-02-01

This work proposes the application of the latest methods of photo-modeling to the study of Gothic architecture in Sardinia. The aim is to consider the versatility and ease of use of such documentation tools in order to study architecture and its ornamental details. The paper illustrates a procedure of integrated survey and restitution, with the purpose to obtain an accurate 3D model of some gothic portals. We combined the contact survey and the photographic survey oriented to the photo-modelling. The software used is 123D Catch by Autodesk an Image Based Modelling (IBM) system available free. It is a web-based application that requires a few simple steps to produce a mesh from a set of not oriented photos. We tested the application on four portals, working at different scale of detail: at first the whole portal and then the different architectural elements that composed it. We were able to model all the elements and to quickly extrapolate simple sections, in order to make a comparison between the moldings, highlighting similarities and differences. Working in different sites at different scale of detail, have allowed us to test the procedure under different conditions of exposure, sunshine, accessibility, degradation of surface, type of material, and with different equipment and operators, showing if the final result could be affected by these factors. We tested a procedure, articulated in a few repeatable steps, that can be applied, with the right corrections and adaptations, to similar cases and/or larger or smaller elements.

Development of a modular integrated control architecture for flexible manipulators. Final report

International Nuclear Information System (INIS)

Burks, B.L.; Battiston, G.

1994-01-01

In April 1994, ORNL and SPAR completed the joint development of a manipulator controls architecture for flexible structure controls under a CRADA between the two organizations. The CRADA project entailed design and development of a new architecture based upon the Modular Integrated Control Architecture (MICA) previously developed by ORNL. The new architecture, dubbed MICA-II, uses an object-oriented coding philosophy to provide a highly modular and expandable architecture for robotic manipulator control. This architecture can be readily ported to control of many different manipulator systems. The controller also provides a user friendly graphical operator interface and display of many forms of data including system diagnostics. The capabilities of MICA-II were demonstrated during oscillation damping experiments using the Flexible Beam Experimental Test Bed at Hanford

The Architecture Improvement Method: cost management and systematic learning about strategic product architectures

NARCIS (Netherlands)

de Weerd-Nederhof, Petronella C.; Wouters, Marc; Teuns, Steven J.A.; Hissel, Paul H.

2007-01-01

The architecture improvement method (AIM) is a method for multidisciplinary product architecture improvement, addressing uncertainty and complexity and incorporating feedback loops, facilitating trade-off decision making during the architecture creation process. The research reported in this paper

The ABC Adaptive Fusion Architecture

DEFF Research Database (Denmark)

Bunde-Pedersen, Jonathan; Mogensen, Martin; Bardram, Jakob Eyvind

2006-01-01

and early implementation of a systemcapable of adapting to its operating environment, choosingthe best fit combination of the client-server and peerto-peer architectures. The architecture creates a seamlessintegration between a centralized hybrid architecture and adecentralized architecture, relying on what...

Architecture humanitarian emergencies

DEFF Research Database (Denmark)

Gomez-Guillamon, Maria; Eskemose Andersen, Jørgen; Contreras, Jorge Lobos

2013-01-01

Introduced by scientific articles conserning architecture and human rights in light of cultures, emergencies, social equality and sustainability, democracy, economy, artistic development and science into architecture. Concluding in definition of needs for new roles, processes and education of arc......, Architettura di Alghero in Italy, Architecture and Design of Kocaeli University in Turkey, University of Aguascalientes in Mexico, Architectura y Urbanismo of University of Chile and Escuela de Architectura of Universidad Austral in Chile....

Minimalism in architecture: Abstract conceptualization of architecture

Directory of Open Access Journals (Sweden)

Vasilski Dragana

2015-01-01

Full Text Available Minimalism in architecture contains the idea of the minimum as a leading creative tend to be considered and interpreted in working through phenomena of empathy and abstraction. In the Western culture, the root of this idea is found in empathy of Wilhelm Worringer and abstraction of Kasimir Malevich. In his dissertation, 'Abstraction and Empathy' Worringer presented his thesis on the psychology of style through which he explained the two opposing basic forms: abstraction and empathy. His conclusion on empathy as a psychological basis of observation expression is significant due to the verbal congruence with contemporary minimalist expression. His intuition was enhenced furthermore by figure of Malevich. Abstraction, as an expression of inner unfettered inspiration, has played a crucial role in the development of modern art and architecture of the twentieth century. Abstraction, which is one of the basic methods of learning in psychology (separating relevant from irrelevant features, Carl Jung is used to discover ideas. Minimalism in architecture emphasizes the level of abstraction to which the individual functions are reduced. Different types of abstraction are present: in the form as well as function of the basic elements: walls and windows. The case study is an example of Sou Fujimoto who is unequivocal in its commitment to the autonomy of abstract conceptualization of architecture.

Economics-driven software architecture

CERN Document Server

Mistrik, Ivan; Kazman, Rick; Zhang, Yuanyuan

2014-01-01

Economics-driven Software Architecture presents a guide for engineers and architects who need to understand the economic impact of architecture design decisions: the long term and strategic viability, cost-effectiveness, and sustainability of applications and systems. Economics-driven software development can increase quality, productivity, and profitability, but comprehensive knowledge is needed to understand the architectural challenges involved in dealing with the development of large, architecturally challenging systems in an economic way. This book covers how to apply economic consider

Do Architectural Design Decisions Improve the Understanding of Software Architecture? Two Controlled Experiments

NARCIS (Netherlands)

Shahin, M.; Liang, P.; Li, Z.

2014-01-01

Architectural design decision (ADD) and its design rationale, as a paradigm shift on documenting and enriching architecture design description, is supposed to facilitate the understanding of architecture and the reasoning behind the design rationale, which consequently improves the architecting

An SOA-based architecture framework

NARCIS (Netherlands)

Aalst, van der W.M.P.; Beisiegel, M.; Hee, van K.M.; König, D.; Stahl, C.

2007-01-01

We present an Service-Oriented Architecture (SOA)– based architecture framework. The architecture framework is designed to be close to industry standards, especially to the Service Component Architecture (SCA). The framework is language independent and the building blocks of each system, activities

Rhein-Ruhr architecture

DEFF Research Database (Denmark)

2002-01-01

katalog til udstillingen 'Rhein - Ruhr architecture' Meldahls smedie, 15. marts - 28. april 2002. 99 sider......katalog til udstillingen 'Rhein - Ruhr architecture' Meldahls smedie, 15. marts - 28. april 2002. 99 sider...

ATCA for Machines-- Advanced Telecommunications Computing Architecture

International Nuclear Information System (INIS)

Larsen, R

2008-01-01

The Advanced Telecommunications Computing Architecture is a new industry open standard for electronics instrument modules and shelves being evaluated for the International Linear Collider (ILC). It is the first industrial standard designed for High Availability (HA). ILC availability simulations have shown clearly that the capabilities of ATCA are needed in order to achieve acceptable integrated luminosity. The ATCA architecture looks attractive for beam instruments and detector applications as well. This paper provides an overview of ongoing R and D including application of HA principles to power electronics systems

Bionics in architecture

Directory of Open Access Journals (Sweden)

Sugár Viktória

2017-04-01

Full Text Available The adaptation of the forms and phenomena of nature is not a recent concept. Observation of natural mechanisms has been a primary source of innovation since prehistoric ages, which can be perceived through the history of architecture. Currently, this idea is coming to the front again through sustainable architecture and adaptive design. Investigating natural innovations and the clear-outness of evolution during the 20th century led to the creation of a separate scientific discipline, Bionics. Architecture and Bionics are strongly related to each other, since the act of building is as old as the human civilization - moreover its first formal and structural source was obviously the surrounding environment. Present paper discusses the definition of Bionics and its connection with the architecture.

Integrating Computing Resources: A Shared Distributed Architecture for Academics and Administrators.

Science.gov (United States)

Beltrametti, Monica; English, Will

1994-01-01

Development and implementation of a shared distributed computing architecture at the University of Alberta (Canada) are described. Aspects discussed include design of the architecture, users' views of the electronic environment, technical and managerial challenges, and the campuswide human infrastructures needed to manage such an integrated…

Simple engineering design for complex thermoelectric generators based on reduced current approach

DEFF Research Database (Denmark)

Wijesooriyage, Waruna Dissanayaka; Rezaniakolaei, Alireza; Rosendahl, Lasse

2015-01-01

Thermoelectric generators (TEGs) are niche candidate for the field of energy management as electrical generator devices. Generally, comprehensive and accurate design techniques for TEGs (thermoelectric generators), such as reduced current approach (RCA), are complex and time consuming processes....... This study develops a simple, comprehensive and accurate TEG designing technique based on RCA. The proposed method can predict the most efficient TEG architecture with more than 97% accuracy comparing to the RCA over wide range of possible temperature and zT for present TEG applications. Moreover...

Advanced Ground Systems Maintenance Enterprise Architecture Project

Science.gov (United States)

Perotti, Jose M. (Compiler)

2015-01-01

The project implements an architecture for delivery of integrated health management capabilities for the 21st Century launch complex. The delivered capabilities include anomaly detection, fault isolation, prognostics and physics based diagnostics.

Reliability analysis of multicellular system architectures for low-cost satellites

Science.gov (United States)

Erlank, A. O.; Bridges, C. P.

2018-06-01

Multicellular system architectures are proposed as a solution to the problem of low reliability currently seen amongst small, low cost satellites. In a multicellular architecture, a set of independent k-out-of-n systems mimic the cells of a biological organism. In order to be beneficial, a multicellular architecture must provide more reliability per unit of overhead than traditional forms of redundancy. The overheads include power consumption, volume and mass. This paper describes the derivation of an analytical model for predicting a multicellular system's lifetime. The performance of such architectures is compared against that of several common forms of redundancy and proven to be beneficial under certain circumstances. In addition, the problem of peripheral interfaces and cross-strapping is investigated using a purpose-developed, multicellular simulation environment. Finally, two case studies are presented based on a prototype cell implementation, which demonstrate the feasibility of the proposed architecture.

Architectural Prototyping in Industrial Practice

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2008-01-01

Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system......, in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... and focus group involving architects from four companies in which we have focused on architectural prototypes. Our findings conclude that architectural prototypes play an important role in resolving problems experimentally, but less so in exploring alternative solutions. Furthermore, architectural...

Constellation Architecture Team-Lunar Scenario 12.0 Habitation Overview

Science.gov (United States)

Kennedy, Kriss J.; Toups, Larry D.; Rudisill, Marianne

2010-01-01

This paper will describe an overview of the Constellation Architecture Team Lunar Scenario 12.0 (LS-12) surface habitation approach and concept performed during the study definition. The Lunar Scenario 12 architecture study focused on two primary habitation approaches: a horizontally-oriented habitation module (LS-12.0) and a vertically-oriented habitation module (LS-12.1). This paper will provide an overview of the 12.0 lunar surface campaign, the associated outpost architecture, habitation functionality, concept description, system integration strategy, mass and power resource estimates. The Scenario 12 architecture resulted from combining three previous scenario attributes from Scenario 4 "Optimized Exploration", Scenario 5 "Fission Surface Power System" and Scenario 8 "Initial Extensive Mobility" into Scenario 12 along with an added emphasis on defining the excursion ConOps while the crew is away from the outpost location. This paper will describe an overview of the CxAT-Lunar Scenario 12.0 habitation concepts and their functionality. The Crew Operations area includes basic crew accommodations such as sleeping, eating, hygiene and stowage. The EVA Operations area includes additional EVA capability beyond the suitlock function such as suit maintenance, spares stowage, and suit stowage. The Logistics Operations area includes the enhanced accommodations for 180 days such as enhanced life support systems hardware, consumable stowage, spares stowage, interconnection to the other habitation elements, a common interface mechanism for future growth, and mating to a pressurized rover or Pressurized Logistics Module (PLM). The Mission & Science Operations area includes enhanced outpost autonomy such as an IVA glove box, life support, medical operations, and exercise equipment.

Secure Storage Architectures

Energy Technology Data Exchange (ETDEWEB)

Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

2015-01-01

The purpose of this report is to clarify the challenges associated with storage for secure enclaves. The major focus areas for the report are: - review of relevant parallel filesystem technologies to identify assets and gaps; - review of filesystem isolation/protection mechanisms, to include native filesystem capabilities and auxiliary/layered techniques; - definition of storage architectures that can be used for customizable compute enclaves (i.e., clarification of use-cases that must be supported for shared storage scenarios); - investigate vendor products related to secure storage. This study provides technical details on the storage and filesystem used for HPC with particular attention on elements that contribute to creating secure storage. We outline the pieces for a a shared storage architecture that balances protection and performance by leveraging the isolation capabilities available in filesystems and virtualization technologies to maintain the integrity of the data. Key Points: There are a few existing and in-progress protection features in Lustre related to secure storage, which are discussed in (Chapter 3.1). These include authentication capabilities like GSSAPI/Kerberos and the in-progress work for GSSAPI/Host-keys. The GPFS filesystem provides native support for encryption, which is not directly available in Lustre. Additionally, GPFS includes authentication/authorization mechanisms for inter-cluster sharing of filesystems (Chapter 3.2). The limitations of key importance for secure storage/filesystems are: (i) restricting sub-tree mounts for parallel filesystem (which is not directly supported in Lustre or GPFS), and (ii) segregation of hosts on the storage network and practical complications with dynamic additions to the storage network, e.g., LNET. A challenge for VM based use cases will be to provide efficient IO forwarding of the parallel filessytem from the host to the guest (VM). There are promising options like para-virtualized filesystems to

Product Architecture Modularity Strategies

DEFF Research Database (Denmark)

Mikkola, Juliana Hsuan

2003-01-01

The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...

Iraqi architecture in mogul period

Directory of Open Access Journals (Sweden)

Hasan Shatha

2018-01-01

Full Text Available Iraqi architecture have many periods passed through it until now, each on from these periods have it is architectural style, also through time these styles interacted among us, to creating kind of space forming, space relationships, and architectural elements (detailed treatments, the research problem being from the multi interacted architectural styles causing some of confused of general characteristic to every style, that we could distinguish by it. Research tries to study architecture style through Mogul Conquest to Baghdad. Aim of research follow main characteristic for this architectural style in the Mogul periods on the level of form, elements, and treatments. Research depending on descriptive and analytical all buildings belong to this period, so from analyzing there style by, general form for building, architectural elements, and it architectural treatment, therefore; repeating this procedures to every building we get some similarities, from these similarities we can making conclusion about pure characteristic of the style of these period. Other side, we also discover some Dissimilar in the building periods, these will lead research to make what interacting among styles in this period, after all that we can drew clearly main characteristic of Architectural Style for Mogul Conquest in Baghdad

Advanced and secure architectural EHR approaches.

Science.gov (United States)

Blobel, Bernd

2006-01-01

Electronic Health Records (EHRs) provided as a lifelong patient record advance towards core applications of distributed and co-operating health information systems and health networks. For meeting the challenge of scalable, flexible, portable, secure EHR systems, the underlying EHR architecture must be based on the component paradigm and model driven, separating platform-independent and platform-specific models. Allowing manageable models, real systems must be decomposed and simplified. The resulting modelling approach has to follow the ISO Reference Model - Open Distributing Processing (RM-ODP). The ISO RM-ODP describes any system component from different perspectives. Platform-independent perspectives contain the enterprise view (business process, policies, scenarios, use cases), the information view (classes and associations) and the computational view (composition and decomposition), whereas platform-specific perspectives concern the engineering view (physical distribution and realisation) and the technology view (implementation details from protocols up to education and training) on system components. Those views have to be established for components reflecting aspects of all domains involved in healthcare environments including administrative, legal, medical, technical, etc. Thus, security-related component models reflecting all view mentioned have to be established for enabling both application and communication security services as integral part of the system's architecture. Beside decomposition and simplification of system regarding the different viewpoint on their components, different levels of systems' granularity can be defined hiding internals or focusing on properties of basic components to form a more complex structure. The resulting models describe both structure and behaviour of component-based systems. The described approach has been deployed in different projects defining EHR systems and their underlying architectural principles. In that context

Insights in Architecture. Resources in Education.

Science.gov (United States)

Skena, K. George

1996-01-01

Focuses on new technological advances in the design process and especially the use of new materials to construct architectural marvels. Discusses the innovations of Le Corbusier, Mies van de Rohe, and Frank Lloyd Wright. Includes a student quiz and possible student outcomes. (JOW)

Medical Data Architecture (MDA) Project Status

Science.gov (United States)

Krihak, M.; Middour, C.; Gurram, M.; Wolfe, S.; Marker, N.; Winther, S.; Ronzano, K.; Bolles, D.; Toscano, W.; Shaw, T.

2018-01-01

The Medical Data Architecture (MDA) project supports the Exploration Medical Capability (ExMC) risk to minimize or reduce the risk of adverse health outcomes and decrements in performance due to in-flight medical capabilities on human exploration missions. To mitigate this risk, the ExMC MDA project addresses the technical limitations identified in ExMC Gap Med 07: We do not have the capability to comprehensively process medically-relevant information to support medical operations during exploration missions. This gap identifies that the current in-flight medical data management includes a combination of data collection and distribution methods that are minimally integrated with on-board medical devices and systems. Furthermore, there are a variety of data sources and methods of data collection. For an exploration mission, the seamless management of such data will enable a more medically autonomous crew than the current paradigm. The medical system requirements are being developed in parallel with the exploration mission architecture and vehicle design. ExMC has recognized that in order to make informed decisions about a medical data architecture framework, current methods for medical data management must not only be understood, but an architecture must also be identified that provides the crew with actionable insight to medical conditions. This medical data architecture will provide the necessary functionality to address the challenges of executing a self-contained medical system that approaches crew health care delivery without assistance from ground support. Hence, the products supported by current prototype development will directly inform exploration medical system requirements.

A COMPARATIVE STUDY OF SYSTEM NETWORK ARCHITECTURE Vs DIGITAL NETWORK ARCHITECTURE

OpenAIRE

Seema; Mukesh Arya

2011-01-01

The efficient managing system of sources is mandatory for the successful running of any network. Here this paper describes the most popular network architectures one of developed by IBM, System Network Architecture (SNA) and other is Digital Network Architecture (DNA). As we know that the network standards and protocols are needed for the network developers as well as users. Some standards are The IEEE 802.3 standards (The Institute of Electrical and Electronics Engineers 1980) (LAN), IBM Sta...

Architecture and emplacement of flood basalt flow fields: case studies from the Columbia River Basalt Group, NW USA

Science.gov (United States)

Vye-Brown, C.; Self, S.; Barry, T. L.

2013-03-01

The physical features and morphologies of collections of lava bodies emplaced during single eruptions (known as flow fields) can be used to understand flood basalt emplacement mechanisms. Characteristics and internal features of lava lobes and whole flow field morphologies result from the forward propagation, radial spread, and cooling of individual lobes and are used as a tool to understand the architecture of extensive flood basalt lavas. The features of three flood basalt flow fields from the Columbia River Basalt Group are presented, including the Palouse Falls flow field, a small (8,890 km2, ˜190 km3) unit by common flood basalt proportions, and visualized in three dimensions. The architecture of the Palouse Falls flow field is compared to the complex Ginkgo and more extensive Sand Hollow flow fields to investigate the degree to which simple emplacement models represent the style, as well as the spatial and temporal developments, of flow fields. Evidence from each flow field supports emplacement by inflation as the predominant mechanism producing thick lobes. Inflation enables existing lobes to transmit lava to form new lobes, thus extending the advance and spread of lava flow fields. Minimum emplacement timescales calculated for each flow field are 19.3 years for Palouse Falls, 8.3 years for Ginkgo, and 16.9 years for Sand Hollow. Simple flow fields can be traced from vent to distal areas and an emplacement sequence visualized, but those with multiple-layered lobes present a degree of complexity that make lava pathways and emplacement sequences more difficult to identify.

Performance evaluation of enterprise architecture with a formal fuzzy model (FPN

Directory of Open Access Journals (Sweden)

Ashkan Marahel

2012-10-01

Full Text Available Preparing enterprise architecture is complicated procedure, which uses framework as structure regularity and style as the behavior director for controlling complexity. As in architecture behavior, precedence over structure, for better diagnosis of a behavior than other behaviors, there is a need to evaluate the architecture performance. Enterprise architecture cannot be organized without the benefit of the logical structure. Framework provides a logical structure for classifying architectural output. Among the common architectural framework, the C4ISR is one of the most appropriate frameworks because of the methodology of its production and the level of aggregation capability and minor revisions. C4ISR framework, in three views and by using some documents called product, describes the architecture. In this paper, for developing the systems, there are always uncertainties in information systems and we may use new version of UML called FUZZY-UML, which includes structure and behavior of the system. The proposed model of this paper also uses Fuzzy Petri nets to analyze the developed system.

Democratic management and architecture school

Directory of Open Access Journals (Sweden)

Silvana Aparecida de Souza

2011-10-01

Full Text Available It is a conceptual and theoretical research on school organization and its democratization, focusing on one aspect of an objective nature: its architecture. The study was based on the academic literature on democratization and theoretical contribution of Michel Foucault, with regard to the analysis of space as a resourcecontrol, surveillance and training, going through a historical review of the modelconstruction of school buildings in Brazil. It is therefore a sociological analysis of the school environment, in relation to the democratization process of basic education, understood as ensuring that the conditions of access and permanence to a universalquality education, and conceived and gestated from collective interests of its users.We conclude that the architecture of public schools in Brazil do not provides democratic management, either by format controller of buildings constructed in the republican period, either by the current economic priority for the construction of public school buildings, which includes little or no space for collective activities. The character of the buildings remains controller, no more for its architecture, but made possible by technological development, which allows monitoring by video cameras, which is made with the permission and support of community.

ARCHITECTURAL FORM CREATION IN THE DESIGN STUDIO: PHYSICAL MODELING AS AN EFFECTIVE DESIGN TOOL

Directory of Open Access Journals (Sweden)

Wael Abdelhameed

2011-11-01

Full Text Available This research paper attempts to shed more light on an area of the design studio, which concerns with the use of physical modeling as a design medium in architectural form creation. An experiment has been carried out during an architectural design studio in order to not only investigate physical modeling as a tool of form creation but also improve visual design thinking that students employ while using this manual tool. To achieve the research objective, a method was proposed and applied to track form creation processes, based upon three types of operation, namely: sketching transformations, divergent physical-modeling transformations, and convergent physical-modeling transformations. The method helps record the innovative transitions of form during conceptual designing in a simple way. Investigating form creation processes and activities associated with visual design thinking enables the research to conclude to general results of the role of physical modeling in the conceptual phase of designing, and to specific results of the methods used in this architectural design studio experiment.

Architectural Lessons: Look Back In Order To Move Forward

Science.gov (United States)

Huang, T.; Djorgovski, S. G.; Caltagirone, S.; Crichton, D. J.; Hughes, J. S.; Law, E.; Pilone, D.; Pilone, T.; Mahabal, A.

2015-12-01

True elegance of scalable and adaptable architecture is not about incorporating the latest and greatest technologies. Its elegance is measured by its ability to scale and adapt as its operating environment evolves over time. Architecture is the link that bridges people, process, policies, interfaces, and technologies. Architectural development begins by observe the relationships which really matter to the problem domain. It follows by the creation of a single, shared, evolving, pattern language, which everyone contributes to, and everyone can use [C. Alexander, 1979]. Architects are the true artists. Like all masterpieces, the values and strength of architectures are measured not by the volumes of publications, it is measured by its ability to evolve. An architect must look back in order to move forward. This talk discusses some of the prior works including onboard data analysis system, knowledgebase system, cloud-based Big Data platform, as enablers to help shape the new generation of Earth Science projects at NASA and EarthCube where a community-driven architecture is the key to enable data-intensive science. [C. Alexander, The Timeless Way of Building, Oxford University, 1979.

RATS: Reactive Architectures

National Research Council Canada - National Science Library

Christensen, Marc

2004-01-01

This project had two goals: To build an emulation prototype board for a tiled architecture and to demonstrate the utility of a global inter-chip free-space photonic interconnection fabric for polymorphous computer architectures (PCA...

Architectural Anthropology

DEFF Research Database (Denmark)

Stender, Marie

Architecture and anthropology have always had a common focus on dwelling, housing, urban life and spatial organisation. Current developments in both disciplines make it even more relevant to explore their boundaries and overlaps. Architects are inspired by anthropological insights and methods......, while recent material and spatial turns in anthropology have also brought an increasing interest in design, architecture and the built environment. Understanding the relationship between the social and the physical is at the heart of both disciplines, and they can obviously benefit from further...... collaboration: How can qualitative anthropological approaches contribute to contemporary architecture? And just as importantly: What can anthropologists learn from architects’ understanding of spatial and material surroundings? Recent theoretical developments in anthropology stress the role of materials...

Modular Integrated Monitoring System (MIMS) - architecture and implementation

International Nuclear Information System (INIS)

Funkhouser, D.R.; Davidson, G.W.; Deland, S.M.

1997-01-01

The MIMS is being developed as a cost-effective means of performing safeguards in unattended remote monitoring applications. Based on industry standards and an open systems approach, the MIMS architecture supports both data acquisition and data review subsystems. Data includes images as well as discrete and analog sensor outputs. The MIMS uses an Echelon LonWorks network as a standard means and method of data acquisition from the sensor. A common data base not only stores sensor and image data but also provides a structure by which dynamic changes to the sensor system can be reflected in the data acquisition and data review subsystems without affecting the execution software. The architecture includes standards for wide area communications between data acquisition systems and data review systems. Data authentication is provided as an integral part of the design. The MIMS software implements this architecture by combining the use of commercial applications with a set of custom 16 and 32 bit Microsoft Windows applications which are run under Windows NT and Windows 95 operating systems

Architectural Knitted Surfaces

DEFF Research Database (Denmark)

Mossé, Aurélie

2010-01-01

WGSN reports from the Architectural Knitted Surfaces workshop recently held at ShenkarCollege of Engineering and Design, Tel Aviv, which offered a cutting-edge insight into interactive knitted surfaces. With the increasing role of smart textiles in architecture, the Architectural Knitted Surfaces...... workshop brought together architects and interior and textile designers to highlight recent developments in intelligent knitting. The five-day workshop was led by architects Ayelet Karmon and Mette Ramsgaard Thomsen, together with Amir Cang and Eyal Sheffer from the Knitting Laboratory, in collaboration...

Quenched Large Deviations for Simple Random Walks on Percolation Clusters Including Long-Range Correlations

Science.gov (United States)

Berger, Noam; Mukherjee, Chiranjib; Okamura, Kazuki

2018-03-01

We prove a quenched large deviation principle (LDP) for a simple random walk on a supercritical percolation cluster (SRWPC) on {Z^d} ({d ≥ 2}). The models under interest include classical Bernoulli bond and site percolation as well as models that exhibit long range correlations, like the random cluster model, the random interlacement and the vacant set of random interlacements (for {d ≥ 3}) and the level sets of the Gaussian free field ({d≥ 3}). Inspired by the methods developed by Kosygina et al. (Commun Pure Appl Math 59:1489-1521, 2006) for proving quenched LDP for elliptic diffusions with a random drift, and by Yilmaz (Commun Pure Appl Math 62(8):1033-1075, 2009) and Rosenbluth (Quenched large deviations for multidimensional random walks in a random environment: a variational formula. Ph.D. thesis, NYU, arXiv:0804.1444v1) for similar results regarding elliptic random walks in random environment, we take the point of view of the moving particle and prove a large deviation principle for the quenched distribution of the pair empirical measures of the environment Markov chain in the non-elliptic case of SRWPC. Via a contraction principle, this reduces easily to a quenched LDP for the distribution of the mean velocity of the random walk and both rate functions admit explicit variational formulas. The main difficulty in our set up lies in the inherent non-ellipticity as well as the lack of translation-invariance stemming from conditioning on the fact that the origin belongs to the infinite cluster. We develop a unifying approach for proving quenched large deviations for SRWPC based on exploiting coercivity properties of the relative entropies in the context of convex variational analysis, combined with input from ergodic theory and invoking geometric properties of the supercritical percolation cluster.

Technical architecture of ONC-approved plans for statewide health information exchange.

Science.gov (United States)

Barrows, Randolph C; Ezzard, John

2011-01-01

ONC-approved state plans for HIE were reviewed for descriptions and depictions of statewide HIE technical architecture. Review was complicated by non-standard organizational elements and technical terminology across state plans. Findings were mapped to industry standard, referenced, and defined HIE architecture descriptions and characteristics. Results are preliminary due to the initial subset of ONC-approved plans available, the rapid pace of new ONC-plan approvals, and continuing advancements in standards and technology of HIE, etc. Review of 28 state plans shows virtually all include a direct messaging component, but for participating entities at state-specific levels of granularity (RHIO, enterprise, organization/provider). About ½ of reviewed plans describe a federated architecture, and ¼ of plans utilize a single-vendor "hybrid-federated" architecture. About 1/3 of states plan to leverage new federal and open exchange technologies (DIRECT, CONNECT, etc.). Only one plan describes a centralized architecture for statewide HIE, but others combine central and federated architectural approaches.

A New Electronic Commerce Architecture in the Cloud

OpenAIRE

Guigang Zhang; Chao Li; Sixin Xue; Yuenan Liu; Yong Zhang; Chunxiao Xing

2012-01-01

In this paper, the authors propose a new electronic commerce architecture in the cloud that satisfies the requirements of the cloud. This architecture includes five technologies, which are the massive EC data storage technology in the cloud, the massive EC data processing technology in the cloud, the EC security management technology in the cloud, OLAP technology for EC in the cloud, and active EC technology in the cloud. Finally, a detailed discussion of future trends for EC in the cloud env...

Different Device Architectures for Bulk-Heterojunction Solar Cells

Directory of Open Access Journals (Sweden)

Getachew Adam

2016-08-01

Full Text Available We report different solar cell designs which allow a simple electrical connection of subsequent devices deposited on the same substrate. By arranging so-called standard and inverted solar-cell architectures next to each other, a serial connection of the two devices can easily be realized by a single compound electrode. In this work, we tested different interfacial layer materials like polyethylenimine (PEI and PEDOT:PSS, and silver as a non-transparent electrode material. We also built organic light emitting diodes applying the same device designs demonstrating the versatility of applied layer stacks. The proposed design should allow the preparation of organic bulk-heterojunction modules with minimized photovoltaically inactive regions at the interconnection of individual devices.

Manipulations of Totalitarian Nazi Architecture

Science.gov (United States)

Antoszczyszyn, Marek

2017-10-01

The paper takes under considerations controversies surrounding German architecture designed during Nazi period between 1933-45. This architecture is commonly criticized for being out of innovation, taste & elementary sense of beauty. Moreover, it has been consequently wiped out from architectural manuals, probably for its undoubted associations with the totalitarian system considered as the most maleficent in the whole history. But in the meantime the architecture of another totalitarian system which appeared to be not less sinister than Nazi one is not stigmatized with such verve. It is Socrealism architecture, developed especially in East Europe & reportedly containing lots of similarities with Nazi architecture. Socrealism totalitarian architecture was never condemned like Nazi one, probably due to politically manipulated propaganda that influenced postwar public opinion. This observation leads to reflection that maybe in the same propaganda way some values of Nazi architecture are still consciously dissembled in order to hide the fact that some rules used by Nazi German architects have been also consciously used after the war. Those are especially manipulations that allegedly Nazi architecture consisted of. The paper provides some definitions around totalitarian manipulations as well as ideological assumptions for their implementation. Finally, the register of confirmed manipulations is provided with use of photo case study.

Intercloud Architecture Framework for Interoperability and Integration

NARCIS (Netherlands)

Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.J.

2013-01-01

This report presents on-going research to develop the Intercloud Architecture Framework (ICAF) that addresses interoperability and integration issues in multi-provider multi-domain heterogeneous Cloud based infrastructure services and applications provisioning, including integration and

Architectural design of an advanced naturally ventilated building form

Energy Technology Data Exchange (ETDEWEB)

Lomas, K.J. [De Montfort University, Leicester (United Kingdom). Institute of Energy and Sustainable Development

2007-02-15

Advanced stack-ventilated buildings have the potential to consume much less energy for space conditioning than typical mechanically ventilated or air-conditioned buildings. This paper describes how environmental design considerations in general, and ventilation considerations in particular, shape the architecture of advanced naturally ventilated (ANV) buildings. The attributes of simple and advanced naturally ventilated buildings are described and a taxonomy of ANV buildings presented. Simple equations for use at the preliminary design stage are presented. These produce target structural cross section areas for the key components of ANV systems. The equations have been developed through practice-based research to design three large educational buildings: the Frederick Lanchester Library, Coventry, UK; the School of Slavonic and East European Studies, London, UK; the Harm A. Weber Library, Elgin, near Chicago, USA. These buildings are briefly described and the sizes of the as-built ANV features compared with the target values for use in preliminary design. The three buildings represent successive evolutionary stages: from advanced natural ventilation, to ANV with passive downdraught cooling, and finally ANV with HVAC support. Hopefully the guidance, simple calculation tools and case study examples will give architects and environmental design consultants confidence to embark on the design of ANV buildings. (author)

Architecture at Hydro-Quebec. L'architecture a Hydro-Quebec

Energy Technology Data Exchange (ETDEWEB)

1991-01-01

Architecture at Hydro-Quebec is concerned not only with combining function and aesthetics in designing buildings and other structures for an electrical utility, but also to satisfy technical and administrative needs and to help solve contemporary problems such as the rational use of energy. Examples are presented of Hydro-Quebec's architectural accomplishments in the design of hydroelectric power stations and their surrounding landscapes, thermal power stations, transmission substations, research and testing facilities, and administrative buildings. It is shown how some buildings are designed to adapt to local environments and to conserve energy. The utility's policy of conserving installations of historic value, such as certain pre-1930 power stations, is illustrated, and aspects of its general architectural policy are outlined. 20 figs.

Quantifying the Value of RFID and the EPCglobal Architecture Framework in Logistics

CERN Document Server

Uckelmann, Dieter

2012-01-01

The “EPCglobal Architecture Framework” is currently the most accepted technical approach to the Internet of Things and provides a solid foundation for building Business-to-Business information networks based on unique identifications of ‘things’. Lately, the vision of the Internet of Things has been extended to a more holistic approach that integrates sensors as well as actuators and includes non-business stakeholders. A detailed look at the current state of the art in research concerning cost and benefit estimations is provided and the limits of Cost Benefit Sharing for RFID-based IT-infrastructures are explained. In this work a market driven evaluation based on sales potential of information is developed. Simple technical means for aggregation of micro values to a billable amount are discussed. The requirements for electronic billing infrastructure are defined and a matching e-billing solutions for an evaluation scenario is presented, providing a technical infrastructure to evaluate and bill product...

Emerging memory technologies design, architecture, and applications

CERN Document Server

2014-01-01

This book explores the design implications of emerging, non-volatile memory (NVM) technologies on future computer memory hierarchy architecture designs. Since NVM technologies combine the speed of SRAM, the density of DRAM, and the non-volatility of Flash memory, they are very attractive as the basis for future universal memories. This book provides a holistic perspective on the topic, covering modeling, design, architecture and applications. The practical information included in this book will enable designers to exploit emerging memory technologies to improve significantly the performance/power/reliability of future, mainstream integrated circuits. • Provides a comprehensive reference on designing modern circuits with emerging, non-volatile memory technologies, such as MRAM and PCRAM; • Explores new design opportunities offered by emerging memory technologies, from a holistic perspective; • Describes topics in technology, modeling, architecture and applications; • Enables circuit designers to ex...

Designs and Architectures for the Next Generation of Organic Solar Cells

Directory of Open Access Journals (Sweden)

Kang-Shyang Liao

2010-06-01

Full Text Available Organic solar cells show great promise as an economically and environmentally friendly technology to utilize solar energy because of their simple fabrication processes and minimal material usage. However, new innovations and breakthroughs are needed for organic solar cell technology to become competitive in the future. This article reviews research efforts and accomplishments focusing on three issues: power conversion efficiency, device stability and processability for mass production, followed by an outlook for optimizing OSC performance through device engineering and new architecture designs to realize next generation organic solar cells.

VLSI Architectures for Sliding-Window-Based Space-Time Turbo Trellis Code Decoders

Directory of Open Access Journals (Sweden)

Georgios Passas

2012-01-01

Full Text Available The VLSI implementation of SISO-MAP decoders used for traditional iterative turbo coding has been investigated in the literature. In this paper, a complete architectural model of a space-time turbo code receiver that includes elementary decoders is presented. These architectures are based on newly proposed building blocks such as a recursive add-compare-select-offset (ACSO unit, A-, B-, Γ-, and LLR output calculation modules. Measurements of complexity and decoding delay of several sliding-window-technique-based MAP decoder architectures and a proposed parameter set lead to defining equations and comparison between those architectures.

Towards a Media Architecture

DEFF Research Database (Denmark)

Ebsen, Tobias

2010-01-01

This text explores the concept of media architecture as a phenomenon of visual culture that describes the use of screen-technology in new spatial configurations in practices of architecture and art. I shall argue that this phenomenon is not necessarily a revolutionary new approach, but rather...... a result of conceptual changes in both modes visual representation and in expressions of architecture. These are changes the may be described as an evolution of ideas and consequent experiments that can be traced back to changes in the history of art and the various styles and ideologies of architecture....

Architectural Engineers

DEFF Research Database (Denmark)

Petersen, Rikke Premer

engineering is addresses from two perspectives – as an educational response and an occupational constellation. Architecture and engineering are two of the traditional design professions and they frequently meet in the occupational setting, but at educational institutions they remain largely estranged....... The paper builds on a multi-sited study of an architectural engineering program at the Technical University of Denmark and an architectural engineering team within an international engineering consultancy based on Denmark. They are both responding to new tendencies within the building industry where...... the role of engineers and architects increasingly overlap during the design process, but their approaches reflect different perceptions of the consequences. The paper discusses some of the challenges that design education, not only within engineering, is facing today: young designers must be equipped...

Simple vibration modeling of structural fuzzy with continuous boundary by including two-dimensional spatial memory

DEFF Research Database (Denmark)

Friis, Lars; Ohlrich, Mogens

2008-01-01

Many complicated systems of practical interest consist basically of a well-defined outer shell-like master structure and a complicated internal structure with uncertain dynamic properties. Using the "fuzzy structure theory" for predicting audible frequency vibration, the internal structure......-dimensional continuous boundary. Additionally, a simple method for determining the so-called equivalent coupling factor is presented. The validity of this method is demonstrated by numerical simulations of the vibration response of a master plate structure with fuzzy attachments. It is revealed that the method performs...

Knowledge and Architectural Practice

DEFF Research Database (Denmark)

Verbeke, Johan

2017-01-01

of the level of research methods and will explain that the research methods and processes in creative practice research are very similar to grounded theory which is an established research method in the social sciences. Finally, an argument will be made for a more explicit research attitude in architectural......This paper focuses on the specific knowledge residing in architectural practice. It is based on the research of 35 PhD fellows in the ADAPT-r (Architecture, Design and Art Practice Training-research) project. The ADAPT-r project innovates architectural research in combining expertise from academia...... and from practice in order to highlight and extract the specific kind of knowledge which resides and is developed in architectural practice (creative practice research). The paper will discuss three ongoing and completed PhD projects and focusses on the outcomes and their contribution to the field...

Deployment Analysis of a Simple Tape-Spring Hinge Using Probabilistic Methods

Science.gov (United States)

Lyle, Karen H.; Horta, Lucas G.

2012-01-01

Acceptance of new deployable structures architectures and concepts requires validated design methods to minimize the expense involved with technology validation flight testing. Deployable concepts for large lightweight spacecraft include booms, antennae, and masts. This paper explores the implementation of probabilistic methods in the design process for the deployment of a strain-energy mechanism, specifically a simple tape-spring hinge. Strain-energy mechanisms are attractive for deployment in very lightweight systems because they do not require the added mass and complexity associated with motors and controllers. However, designers are hesitant to include free deployment, strain-energy mechanisms because of the potential for uncontrolled behavior. In the example presented here, the tapespring cross-sectional dimensions have been varied and a target displacement during deployment has been selected as the design metric. Specifically, the tape-spring should reach the final position in the shortest time with the minimal amount of overshoot and oscillations. Surrogate models have been used to reduce computational expense. Parameter values to achieve the target response have been computed and used to demonstrate the approach. Based on these results, the application of probabilistic methods for design of a tape-spring hinge has shown promise as a means of designing strain-energy components for more complex space concepts.

A new architecture for a single-chip multi-channel beamformer based on a standard FPGA

DEFF Research Database (Denmark)

Tomov, Borislav Gueorguiev; Jensen, Jørgen Arendt

2001-01-01

) modulation analog-to-digital converters (ADC). Second, simple second-order ΔΣ modulation ADC with classic topology is used. This allows for simple analog circuitry and a very compact design. Several tens of these together with the corresponding preamplifiers can be fitted together onto a single analog......A new architecture for a compact medical ultrasound beamformer has been developed. Combination of novel and known principles has been utilized, leading to low processing power requirements and simple analog circuitry. Usage of a field programmable gate array (FPGA) for the digital signal processing...... integrated circuit. Third, parameter driven delay generation is used, using 3 input parameters per line per channel for either linear array imaging or phased array imaging. The delays are generated on the fly. The delay generation logic also determines the digital apodization by using 2 additional parameters...

ISLAMIZATION OF CONTEMPORARY ARCHITECTURE: SHIFTING THE PARADIGM OF ISLAMIC ARCHITECTURE

Directory of Open Access Journals (Sweden)

Mustapha Ben- Hamouche

2012-03-01

Full Text Available Islamic architecture is often thought as a history course and thus finds its material limited to the cataloguing and studying of legacies of successive empires or various geographic regions of the Islamic world. In practice, adherent professionals tend to reproduce high styles such as Umayyad, Abassid, Fatimid, Ottoman, etc., or recycle well known elements such as the minarets, courtyards, and mashrabiyyahs. This approach, endorsed by the present comprehensive Islamic revival, is believed to be the way to defend and revitalize the identity of Muslim societies that was initially affected by colonization and now is being offended by globalization. However, this approach often clashes with the contemporary trends in architecture that do not necessarily oppose the essence of Islamic architecture. Furthermore, it sometimes lead to an erroneous belief that consists of relating a priori forms to Islam and that clashes with the timeless and universal character of the Islamic religion. The key question to be asked then is, beyond this historicist view, what would be an “Islamic architec-ture” of nowadays that originates from the essence of Islam and that responds to contemporary conditions, needs, aspirations of present Muslim societies and individuals. To what extends can Islamic architecture bene-fits from modern progress and contemporary thought in resurrecting itself without loosing its essence. The hypothesis of the study is that, just as early Muslim architecture started from the adoption, use and re-use of early pre-Islamic architectures before reaching originality, this process, called Islamization, could also take place nowadays with the contemporary thought that is mostly developed in Western and non-Islamic environ-ments. Mechanisms in Islam that allowed the “absorption” of pre-existing civilizations should thus structure the islamization approach and serve the scholars and professionals to reach the new Islamic architecture. The

Architectural design of heterogeneous metallic nanocrystals--principles and processes.

Science.gov (United States)

Yu, Yue; Zhang, Qingbo; Yao, Qiaofeng; Xie, Jianping; Lee, Jim Yang

2014-12-16

CONSPECTUS: Heterogeneous metal nanocrystals (HMNCs) are a natural extension of simple metal nanocrystals (NCs), but as a research topic, they have been much less explored until recently. HMNCs are formed by integrating metal NCs of different compositions into a common entity, similar to the way atoms are bonded to form molecules. HMNCs can be built to exhibit an unprecedented architectural diversity and complexity by programming the arrangement of the NC building blocks ("unit NCs"). The architectural engineering of HMNCs involves the design and fabrication of the architecture-determining elements (ADEs), i.e., unit NCs with precise control of shape and size, and their relative positions in the design. Similar to molecular engineering, where structural diversity is used to create more property variations for application explorations, the architectural engineering of HMNCs can similarly increase the utility of metal NCs by offering a suite of properties to support multifunctionality in applications. The architectural engineering of HMNCs calls for processes and operations that can execute the design. Some enabling technologies already exist in the form of classical micro- and macroscale fabrication techniques, such as masking and etching. These processes, when used singly or in combination, are fully capable of fabricating nanoscopic objects. What is needed is a detailed understanding of the engineering control of ADEs and the translation of these principles into actual processes. For simplicity of execution, these processes should be integrated into a common reaction system and yet retain independence of control. The key to architectural diversity is therefore the independent controllability of each ADE in the design blueprint. The right chemical tools must be applied under the right circumstances in order to achieve the desired outcome. In this Account, after a short illustration of the infinite possibility of combining different ADEs to create HMNC design

Information Architecture as Reflected in Classrooms.

Science.gov (United States)

Zhang, Xiangmin; Strand, Linda; Fisher, Nancy; Kneip, Jason; Ayoub, Olga

2002-01-01

Explores information architecture curricula at North American universities based on an analysis of 40 course descriptions available on the Web. Academic disciplines related to IA education include library and information science, information technology, business administration, literature, arts, and design as well as continuing education programs.…

RETHINKING HOUSING EDUCATION IN ARCHITECTURE SCHOOLS

Directory of Open Access Journals (Sweden)

Avi Friedman

2010-07-01

Full Text Available Architects are involved in only a small percentage of all built projects and are becoming marginalized in the huge home-building industry where other professions are moving in to profit from the need for affordable housing. The vast majority of homebuyers today view housing as a commodity and are unwilling to spend more on an architect-designed house. Architects must expand the market for their services to include a far greater percentage of new buildings. It is my contention that the new place for architects is in the design of speculative housing as expert consultant to the developer. The practice of architecture must change emphasis to consider more social and economic concerns. The attitudes and skills currently being taught in architecture schools must change to reflect the new needs of the profession. Architects must be taught behavioral psychology, demographics, and building economics to enable them to apply their knowledge to the market, thereby rendering the architect’s services indispensable to developers and the housing industry. Architectural education must play a key role in redefining the scope of the profession.

Turbo decoder architecture for beyond-4G applications

CERN Document Server

Wong, Cheng-Chi

2013-01-01

This book describes the most recent techniques for turbo decoder implementation, especially for 4G and beyond 4G applications. The authors reveal techniques for the design of high-throughput decoders for future telecommunication systems, enabling designers to reduce hardware cost and shorten processing time. Coverage includes an explanation of VLSI implementation of the turbo decoder, from basic functional units to advanced parallel architecture. The authors discuss both hardware architecture techniques and experimental results, showing the variations in area/throughput/performance with respec

Pale Nordic Architecture : Why are our walls so white?

OpenAIRE

Anttalainen, Sisko

2018-01-01

The aim was to investigate the perception of whiteness in Nordic architecture and analyse the reasonsbehind the pale colour scheme in a public space context. The word pale was used alongsidewith white, since it gave broader possibilities to ponder over the topic. The geographical researcharea was framed to cover Sweden and Finland, although the search for underlying reasons extendedbeyond the borders of the North. Architecture was viewed as an entity, including both exteriors andinteriors. Th...

The Political Economy of Architectural Research : Dutch Architecture, Architects and the City, 2000-2012

NARCIS (Netherlands)

Djalali, A.

2016-01-01

The status of architectural research has not yet been clearly defined. Nevertheless, architectural research has surely become a core element in the profession of architecture. In fact, the tendency seem for architects to be less and less involved with building design and construction services, which

Materials Driven Architectural Design and Representation

DEFF Research Database (Denmark)

Kruse Aagaard, Anders

2015-01-01

This paper aims to outline a framework for a deeper connection between experimentally obtained material knowledge and architectural design. While materials and architecture in the process of realisation are tightly connected, architectural design and representation are often distanced from...... another role in relation to architectural production. It is, in this paper, the intention to point at material research as an active initiator in explorative approaches to architectural design methods and architectural representation. This paper will point at the inclusion of tangible and experimental...... material research in the early phases of architectural design and to that of the architectural set of tools and representation. The paper will through use of existing research and the author’s own material research and practice suggest a way of using a combination of digital drawing, digital fabrication...

Architectural Engineering to Super-Light Structures

DEFF Research Database (Denmark)

Castberg, Niels Andreas

The increasing global urbanisation creates a great demand for new buildings. In the aim to honour this, a new structural system, offering flexibility and variation at no extra cost appears beneficial. Super-Light Structures constitute such a system. This PhD thesis examines Super-Light Structures...... with architectural engineering as a starting point. The thesis is based on a two stringed hypothesis: Architectural engineering gives rise to better architecture and Super-Light Structures support and enables a static, challenging architecture. The aim of the thesis is to clarify architectural engineering's impact...... on the work process between architects and engineers in the design development. Using architectural engineering, Super-Light Structures are examined in an architectural context, and it is explained how digital tools can support architectural engineering and design of Super-Light Structures. The experiences...

Software Architectures – Present and Visions

Directory of Open Access Journals (Sweden)

Catalin STRIMBEI

2015-01-01

Full Text Available Nowadays, architectural software systems are increasingly important because they can determine the success of the entire system. In this article we intend to rigorously analyze the most common types of systems architectures and present a personal opinion about the specifics of the university architecture. After analyzing monolithic architectures, SOA architecture and those of the micro- based services, we present specific issues and specific criteria for the university software systems. Each type of architecture is rundown and analyzed according to specific academic challenges. During the analysis, we took into account the factors that determine the success of each architecture and also the common causes of failure. At the end of the article, we objectively decide which architecture is best suited to be implemented in the university area.

Application of simple approximate system analysis methods for reliability and availability improvement of reactor WWER-1000

International Nuclear Information System (INIS)

Manchev, B.; Marinova, B.; Nenkova, B.

2001-01-01

The method described on this report provides a set of simple, easily understood 'approximate' models applicable to a large class of system architectures. Constructing a Markov model of each redundant subsystem and its replacement after that by a pseudo-component develops the approximation models. Of equal importance, the models can be easily understood even of non-experts, including managers, high-level decision-makers and unsophisticated consumers. A necessary requirement for their application is the systems to be repairable and the mean time to repair to be much smaller than the mean time to failure. This ia a case most often met in the real practice. Results of the 'approximate' model application on a technological system of Kozloduy NPP are also presented. The results obtained can be compared quite favorably with the results obtained by using SAPHIRE software

Re[valuating]-architecture

NARCIS (Netherlands)

Pereira Roders, A.R.; Post, J.M.; Erkelens, P.A.; Haugen, T.I.

2006-01-01

The architectural hierarchy of aims altered in the last decades. Quality and comfort have dethroned functionality! We are already familiar with the taxonomy – quality certification in the construction world; but in architectural designs, it is not common to evaluate scientifically, if the design has

Adaptive Architectural Envelope

DEFF Research Database (Denmark)

Foged, Isak Worre; Kirkegaard, Poul Henning

2010-01-01

. The general scopes of this paper are to develop a new adaptive kinetic architectural structure, particularly a reconfigurable architectural structure which can transform body shape from planar geometries to hyper-surfaces using different control strategies, i.e. a transformation into more than one or two...

Architecture and energy

DEFF Research Database (Denmark)

Marsh, Rob; Lauring, Michael

2011-01-01

Traditional low-energy architecture has not necessarily led to reduced energy consumption. A paradigm shift is proposed promoting pluralistic energy-saving strategies.......Traditional low-energy architecture has not necessarily led to reduced energy consumption. A paradigm shift is proposed promoting pluralistic energy-saving strategies....

Architectural Physics: Lighting.

Science.gov (United States)

Hopkinson, R. G.

The author coordinates the many diverse branches of knowledge which have dealt with the field of lighting--physiology, psychology, engineering, physics, and architectural design. Part I, "The Elements of Architectural Physics", discusses the physiological aspects of lighting, visual performance, lighting design, calculations and measurements of…

Base Camp Architecture

Directory of Open Access Journals (Sweden)

Warebi Gabriel Brisibe

2016-03-01

Full Text Available Longitudinal or time line studies of change in the architecture of a particular culture are common, but an area still open to further research is change across space or place. In particular, there is need for studies on architectural change of cultures stemming from the same ethnic source split between their homeland and other Diasporas. This change may range from minor deviations to drastic shifts away from an architectural norm and the accumulation of these shifts within a time frame constitutes variations. This article focuses on identifying variations in the architecture of the Ijo fishing group that migrates along the coastline of West Africa. It examines the causes of cross-cultural variation between base camp dwellings of Ijo migrant fishermen in the Bakassi Peninsula in Cameroon and Bayelsa State in Nigeria. The study draws on the idea of the inevitability of cultural and social change over time as proposed in the theories of cultural dynamism and evolution. It tests aspects of cultural transmission theory using the principal coordinates analysis to ascertain the possible causes of variation. From the findings, this research argues that migration has enhanced the forces of cultural dynamism, which have resulted in significant variations in the architecture of this fishing group.

Using an Integrated Distributed Test Architecture to Develop an Architecture for Mars

Science.gov (United States)

Othon, William L.

2016-01-01

The creation of a crew-rated spacecraft architecture capable of sending humans to Mars requires the development and integration of multiple vehicle systems and subsystems. Important new technologies will be identified and matured within each technical discipline to support the mission. Architecture maturity also requires coordination with mission operations elements and ground infrastructure. During early architecture formulation, many of these assets will not be co-located and will required integrated, distributed test to show that the technologies and systems are being developed in a coordinated way. When complete, technologies must be shown to function together to achieve mission goals. In this presentation, an architecture will be described that promotes and advances integration of disparate systems within JSC and across NASA centers.

The Hi-Ring DCN Architecture

DEFF Research Database (Denmark)

Galili, Michael; Kamchevska, Valerija; Ding, Yunhong

2016-01-01

We will review recent work on the proposed hierarchical ring-based architecture (HiRing) proposed for data center networks. We will discuss the architecture and initial demonstrations of optical switching performance and time-domain synchronization......We will review recent work on the proposed hierarchical ring-based architecture (HiRing) proposed for data center networks. We will discuss the architecture and initial demonstrations of optical switching performance and time-domain synchronization...

Software architecture for time-constrained machine vision applications

Science.gov (United States)

Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.

2013-01-01

Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility, because they are normally oriented toward particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse, and inefficient execution on multicore processors. We present a novel software architecture for time-constrained machine vision applications that addresses these issues. The architecture is divided into three layers. The platform abstraction layer provides a high-level application programming interface for the rest of the architecture. The messaging layer provides a message-passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of message. The application layer provides a repository for reusable application modules designed for machine vision applications. These modules, which include acquisition, visualization, communication, user interface, and data processing, take advantage of the power of well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, the proposed architecture is applied to a real machine vision application: a jam detector for steel pickling lines.

Relational Architecture

DEFF Research Database (Denmark)

Reeh, Henrik

2018-01-01

in a scholarly institution (element #3), as well as the certified PhD scholar (element #4) and the architectural profession, notably its labour market (element #5). This first layer outlines the contemporary context which allows architectural research to take place in a dynamic relationship to doctoral education...... a human and institutional development going on since around 1990 when the present PhD institution was first implemented in Denmark. To be sure, the model is centred around the PhD dissertation (element #1). But it involves four more components: the PhD candidate (element #2), his or her supervisor...... and interrelated fields in which history, place, and sound come to emphasize architecture’s relational qualities rather than the apparent three-dimensional solidity of constructed space. A third layer of relational architecture is at stake in the professional experiences after the defence of the authors...

Trans-architecture

Directory of Open Access Journals (Sweden)

Tim Gough

2017-12-01

Full Text Available Starting from the intense experience of the gay club, this paper asks whether that experience or event can be acknowledged by architectural theory. Via a reading of Judith Butler’s Gender Trouble and Jacques Derrida’s Before the Law, it posits that the transing of gender can be a clue as to the transing of architecture away from essentialising ontologies. It then uses Deleuze and Guattari’s idea of an assemblage to show how this can be done, making reference to the assemblage of the gay seduction scene in Proust’s Remembrance of Things Past and the image of the interplay of orchid and wasp that is inspired by it. The paper concludes by showing how this ontology relates to a specific instance of transing architecture in the gay and SM clubs of Vauxhall, South London.

Enterprise Architecture beyond the Enterprise:Extended Enterprise Architecture Revisited

OpenAIRE

Tambo, Torben

2017-01-01

As the most enterprises are relying on relations to other enterprises, it is relevant to consider enterprise architecture for inter-organisational relations particularly those relations involving technology. This has been conceptualised as Extended Enterprise Architecture, and a systematic review of this discipline is the topic of this paper. This paper is taking a point of departure in general theories of business-to-business relationships along with inter-organisational information systems,...

Mechanical stability of surface architecture--consequences for superhydrophobicity.

Science.gov (United States)

Dyett, Brendan P; Wu, Alex H; Lamb, Robert N

2014-11-12

Wet chemistry methods such as sol-gel provide a facile means of preparing coatings with controlled surface chemistry and architecture. The manipulation of colloidal "building blocks," film constituents, and reaction conditions makes it a promising method for simple, scalable, and routine production of superhydrophobic coatings. Despite all of this, the practical application of superhydrophobic coatings remains limited by low mechanical durability. The translation of chemistry to mechanical strength within superhydrophobic films is severely hindered by the requisite physical structure. More specifically, porosity and the surface architecture of roughness in sol-gel-derived films contribute significantly to poor mechanical properties. These physical effects emphasize that collective structure and chemistry-based strategies are required. This challenge is not unique to superhydrophobics, and there are many principles that can be drawn upon to greatly improve performance. The delicate interplay between chemistry and physical structure has been highlighted through theory and characterization of porous and rough interfaces within and outside the framework of superhydrophobics. Insights can further be drawn from biology. Nature's capacity for self-repair remains extremely challenging to mimic in materials. However, nature does demonstrate strategies for structuring nano- and microbuilding blocks to achieve generally mutually exclusive properties. Difficulties with characterization and example mechanical characterization methods have also been emphasized.

Architecture, Drawing, Topology

DEFF Research Database (Denmark)

Meldgaard, Morten

This book presents contributions of drawing and text along with their many relationalities from ontology to history and vice versa in a range of reflections on architecture, drawing and topology. We hope to thereby indicate the potential of the theme in understanding not only the architecture of ...

Software Architecture Evolution

Science.gov (United States)

Barnes, Jeffrey M.

2013-01-01

Many software systems eventually undergo changes to their basic architectural structure. Such changes may be prompted by new feature requests, new quality attribute requirements, changing technology, or other reasons. Whatever the causes, architecture evolution is commonplace in real-world software projects. Today's software architects, however,…

Enterprise architecture intelligence

NARCIS (Netherlands)

Veneberg, R.K.M.; Iacob, Maria Eugenia; van Sinderen, Marten J.; Bodenstaff, L.; Reichert, M.U.; Rinderle-Ma, S.; Grossmann, G.

2014-01-01

Combining enterprise architecture and operational data is complex (especially when considering the actual ‘matching’ of data with enterprise architecture objects), and little has been written on how to do this. Therefore, in this paper we aim to fill this gap and propose a method to combine

Re-engineering Nascom's network management architecture

Science.gov (United States)

Drake, Brian C.; Messent, David

1994-01-01

The development of Nascom systems for ground communications began in 1958 with Project Vanguard. The low-speed systems (rates less than 9.6 Kbs) were developed following existing standards; but, there were no comparable standards for high-speed systems. As a result, these systems were developed using custom protocols and custom hardware. Technology has made enormous strides since the ground support systems were implemented. Standards for computer equipment, software, and high-speed communications exist and the performance of current workstations exceeds that of the mainframes used in the development of the ground systems. Nascom is in the process of upgrading its ground support systems and providing additional services. The Message Switching System (MSS), Communications Address Processor (CAP), and Multiplexer/Demultiplexer (MDM) Automated Control System (MACS) are all examples of Nascom systems developed using standards such as, X-windows, Motif, and Simple Network Management Protocol (SNMP). Also, the Earth Observing System (EOS) Communications (Ecom) project is stressing standards as an integral part of its network. The move towards standards has produced a reduction in development, maintenance, and interoperability costs, while providing operational quality improvement. The Facility and Resource Manager (FARM) project has been established to integrate the Nascom networks and systems into a common network management architecture. The maximization of standards and implementation of computer automation in the architecture will lead to continued cost reductions and increased operational efficiency. The first step has been to derive overall Nascom requirements and identify the functionality common to all the current management systems. The identification of these common functions will enable the reuse of processes in the management architecture and promote increased use of automation throughout the Nascom network. The MSS, CAP, MACS, and Ecom projects have indicated

Computing architecture for autonomous microgrids

Science.gov (United States)

Goldsmith, Steven Y.

2015-09-29

A computing architecture that facilitates autonomously controlling operations of a microgrid is described herein. A microgrid network includes numerous computing devices that execute intelligent agents, each of which is assigned to a particular entity (load, source, storage device, or switch) in the microgrid. The intelligent agents can execute in accordance with predefined protocols to collectively perform computations that facilitate uninterrupted control of the .

Contemporary earthen architecture in the northern temperate climate

DEFF Research Database (Denmark)

Vestergaard, Inge; Eybye, Birgitte Tanderup

2017-01-01

houses designed using passive strategies and renewable materials have increased. Often the earth material, with its low environmental impact, is involved in the construction process. Building qualities include both pleasant living spaces and comfort in terms of better indoor climate. During the last few...... years new developments towards industrialized earthen building components can be seen. Hence the research question is: how can earth as a building material contribute to future Danish architecture? The results point out possible future developments in earthen architecture in Denmark. The methodologies...... and studying the applied materials and techniques....

Evolutionary Effect on the Embodied Beauty of Landscape Architectures.

Science.gov (United States)

Zhang, Wei; Tang, Xiaoxiang; He, Xianyou; Chen, Guangyao

2018-01-01

According to the framework of evolutionary aesthetics, a sense of beauty is related to environmental adaptation and plasticity of human beings, which has adaptive value and biological foundations. Prior studies have demonstrated that organisms derive benefits from the landscape. In this study, we investigated whether the benefits of landscape might elicit a stronger sense of beauty and what the nature of this sense of beauty is. In two experiments, when viewing classical landscape and nonlandscape architectures photographs, participants rated the aesthetic scores (Experiment 1) and had a two-alternative forced choice aesthetic judgment by pressing the reaction button located near to (15 cm) or far from (45 cm) the presenting stimuli (Experiment 2). The results showed that reaction of aesthetic ratings for classical landscape architectures was faster than those of classical nonlandscape architectures. Furthermore, only the reaction of beautiful judgment of classical landscape architecture photograph was significantly faster when the reaction button was in the near position to the presenting photograph than those in the position of far away from the presenting photograph. This finding suggests a facilitated effect for the aesthetic perception of classical landscape architectures due to their corresponding components including water and green plants with strong evolutionary implications. Furthermore, this sense of beauty for classical landscape architectures might be the embodied approach to beauty based on the viewpoint of evolutionary aesthetics and embodied cognition.

Architecture and Phenomenology: Introduction

Directory of Open Access Journals (Sweden)

Brendan O’ Byrne

2014-07-01

Full Text Available The implications of philosophical aesthetics in the consideration of architecture have been relatively slight. Part of the reason is the neglect of architecture in the work of Baumgarten, Burke and Kant. Within the discourse of architecture the questions raised for philosophical consideration arising out of practice restricted the area of reflection and investigation. The dominant positions were to become either a version of neo-Kantianism, or a direct re-working of Hegel’s Lectures on Aesthetics. The significance of Kant’s distinction between ‘free’ and ‘dependent beauty’ is analysed, and in consequence the need to philosophically question again the relation of architecture to buiding, to dwelling and space. For this the question of accessibility as raised in the phenomenological enquiry, in the work of Brentano, Sartre, Bachelard, Merleau-Ponty, and especially Heidegger points to a different route for the appraisal of philosophical and architectural relations which are exhibited in the contributions of the 10 authors to this issue of Footprint.

Architecture and Phenomenology: Introduction

Directory of Open Access Journals (Sweden)

Brendan O’ Byrne

2008-10-01

Full Text Available The implications of philosophical aesthetics in the consideration of architecture have been relatively slight. Part of the reason is the neglect of architecture in the work of Baumgarten, Burke and Kant. Within the discourse of architecture the questions raised for philosophical consideration arising out of practice restricted the area of reflection and investigation. The dominant positions were to become either a version of neo-Kantianism, or a direct re-working of Hegel’s Lectures on Aesthetics. The significance of Kant’s distinction between ‘free’ and ‘dependent beauty’ is analysed, and in consequence the need to philosophically question again the relation of architecture to building, to dwelling and space. For this the question of accessibility as raised in the phenomenological enquiry, in the work of Brentano, Sartre, Bachelard, Merleau-Ponty, and especially Heidegger points to a different route for the appraisal of philosophical and architectural relations which are exhibited in the contributions of the 10 authors to this issue of Footprint.

Can architecture be barbaric?

Science.gov (United States)

Hürol, Yonca

2009-06-01

The title of this article is adapted from Theodor W. Adorno's famous dictum: 'To write poetry after Auschwitz is barbaric.' After the catastrophic earthquake in Kocaeli, Turkey on the 17th of August 1999, in which more than 40,000 people died or were lost, Necdet Teymur, who was then the dean of the Faculty of Architecture of the Middle East Technical University, referred to Adorno in one of his 'earthquake poems' and asked: 'Is architecture possible after 17th of August?' The main objective of this article is to interpret Teymur's question in respect of its connection to Adorno's philosophy with a view to make a contribution to the politics and ethics of architecture in Turkey. Teymur's question helps in providing a new interpretation of a critical approach to architecture and architectural technology through Adorno's philosophy. The paper also presents a discussion of Adorno's dictum, which serves for a better understanding of its universality/particularity.

A Simple and Robust Sliding Mode Velocity Observer for Moving Coil Actuators in Digital Hydraulic Valves

DEFF Research Database (Denmark)

Nørgård, Christian; Schmidt, Lasse; Bech, Michael Møller

2016-01-01

This paper focuses on estimating the velocity and position of fast switching digital hydraulic valves actuated by electromagnetic moving coil actuators, based on measurements of the coil current and voltage. The velocity is estimated by a simple first-order sliding mode observer architecture...... and the position is estimated by integrating the estimated velocity. The binary operation of digi-valves enables limiting and resetting the position estimate since the moving member is switched between the mechanical end-stops of the valve. This enables accurate tracking since drifting effects due to measurement...... noise and integration of errors in the velocity estimate may be circumvented. The proposed observer architecture is presented along with stability proofs and initial experimental results. To reveal the optimal observer performance, an optimization of the observer parameters is carried out. Subsequently...

Towards a networkArchitecture

DEFF Research Database (Denmark)

Rüdiger, Bjarne; Tournay, Bruno

2001-01-01

Planche, bidrag til DAL-konkurrencen. Hvor industrien har været inspirationen for udviklingen af den moderne arkitektur, er IT det tekniske og æstetiske grundlag for den spirende NetworkArchitecture. Computeren og netværker af computerne er således mere end en metafor for NetworkArchitecture....... NetworkArchitecture består af intelligente byggekomponenter forbundet med hinanden i et netværk og i interaktion med omgivelser....

Urban architecture in urban renewal

DEFF Research Database (Denmark)

Holmgren, Steen; Svensson, Ole

2001-01-01

and without obvious architectural value. These issues raise pertinent questions: what urban architectural problems and qualities exist in the complex, inner suburbs? What differences exist between professionals' and residents' perceptions and assessments of urban architecture? How can a shared language...

Synthesis-Based Software Architecture Design

NARCIS (Netherlands)

Tekinerdogan, B.; Aksit, Mehmet; Aksit, Mehmet

2001-01-01

During the last decade several architecture design approaches have been introduced. These approaches however have to cope with several obstacles and software architecture design remains a difficult problem. To cope with these obstacles this chapter introduces a novel architecture design approach.

Hybrid architecture for building secure sensor networks

Science.gov (United States)

Owens, Ken R., Jr.; Watkins, Steve E.

2012-04-01

Sensor networks have various communication and security architectural concerns. Three approaches are defined to address these concerns for sensor networks. The first area is the utilization of new computing architectures that leverage embedded virtualization software on the sensor. Deploying a small, embedded virtualization operating system on the sensor nodes that is designed to communicate to low-cost cloud computing infrastructure in the network is the foundation to delivering low-cost, secure sensor networks. The second area focuses on securing the sensor. Sensor security components include developing an identification scheme, and leveraging authentication algorithms and protocols that address security assurance within the physical, communication network, and application layers. This function will primarily be accomplished through encrypting the communication channel and integrating sensor network firewall and intrusion detection/prevention components to the sensor network architecture. Hence, sensor networks will be able to maintain high levels of security. The third area addresses the real-time and high priority nature of the data that sensor networks collect. This function requires that a quality-of-service (QoS) definition and algorithm be developed for delivering the right data at the right time. A hybrid architecture is proposed that combines software and hardware features to handle network traffic with diverse QoS requirements.

Space Architecture: The Role, Work and Aptitude

Science.gov (United States)

Griffin, Brand

2014-01-01

Space architecture has been an emerging discipline for at least 40 years. Has it arrived? Is space architecture a legitimate vocation or an avocation? If it leads to a job, what do employers want? In 2002, NASA Headquarters created a management position for a space architect whose job was to "lead the development of strategic architectures and identify high level requirements for systems that will accomplish the Nation's space exploration vision." This is a good job description with responsibility at the right level in NASA, but unfortunately, the office was discontinued two years later. Even though there is no accredited academic program or professional licensing for space architecture, there is a community of practitioners. They are civil servants, contractors and academicians supporting International Space Station and space exploration programs. In various ways, space architects currently contribute to human spaceflight, but there is a way for the discipline to be more effective in developing solutions to large scale complex problems. This paper organizes contributions from engineers, architects and psychologists into recommendations on the role of space architects in the organization, the process of creating and selecting options, and intrinsic personality traits including why they must have a high tolerance for ambiguity.

Architecture or Sculpture?

DEFF Research Database (Denmark)

Baumeister, Ruth

2014-01-01

Jørn Utzon´s museum design for Asger Jorn´s collection in Silkeborg contextualized in the postwar context of an organic architecture.......Jørn Utzon´s museum design for Asger Jorn´s collection in Silkeborg contextualized in the postwar context of an organic architecture....

Modular Integrated Monitoring System (MIMS). Architecture and implementation

International Nuclear Information System (INIS)

Funkhouser, D.R.; Davidson, G.W.; Deland, S.M.

1999-01-01

The MIMS is being developed as a cost-effective means of performing safeguards in unattended remote monitoring applications. Based on industry standards and an open systems approach, the MIMS architecture supports both data acquisition and data review subsystems. Data includes images as well as discrete and analog sensor outputs. The MIMS uses an Echelon LonWorks network as a standard means and method of data acquisition from the sensor. A common data base not only stores sensor and image data but also provides a structure by which dynamic changes to the sensor system can be reflected in the data acquisition and data review subsystems without affecting the execution software. The architecture includes standards for wide area communications between data acquisition systems and data review systems. Data authentication is provided as an integral part of the design. The MIMS also provides a generic set of tools for analyzing both system behavior and observed events. The MIMS software implements this architecture by combining the use of commercial applications with a set of custom 16 and 32 bit Microsoft Windows applications which are run under Windows NT and Windows 95 operating systems. (author)

Bipolarity and Ambivalence in Landscape Architecture

NARCIS (Netherlands)

Koh, J.

2010-01-01

Our discipline of landscape architecture contains bipolarity, not only in terms of landscape and architecture but also because the idea of landscape is both aesthetic and scientific. Furthermore, within landscape architecture there is a gap between design (as implied by architecture) and planning

Study on Reverse Engineering of Historical Architecture Based on 3D Laser Scanner

International Nuclear Information System (INIS)

Cheng, X J; Jin, W

2006-01-01

Repair and maintenance of historical architecture includes reinforcement of configuration, repair of figure and so on. All these need surveying information such as blueprint etc. 3D laser scanning technology is one of the important technique methods to acquire spatial data. It scans the architecture point by point quickly; registers and joints point cloud to simulate the shape by computer; reconstructs 3D model accurately finally. It also produces construction drawing including ichnography, elevation, and cutaway. In addition, detail structure and vignette can be got by close-range photogrammetry method, which produces the orthoimage and linear drawing. This method is especially fit for surveying historical architecture that lacks construction records

Software Architecture Reconstruction Method, a Survey

OpenAIRE

Zainab Nayyar; Nazish Rafique

2014-01-01

Architecture reconstruction belongs to a reverse engineering process, in which we move from code to architecture level for reconstructing architecture. Software architectures are the blue prints of projects which depict the external overview of the software system. Mostly maintenance and testing cause the software to deviate from its original architecture, because sometimes for enhancing the functionality of a system the software deviates from its documented specifications, some new modules a...

Architecture of WEST plasma control system

International Nuclear Information System (INIS)

Ravenel, N.; Nouailletas, R.; Barana, O.; Brémond, S.; Moreau, P.; Guillerminet, B.; Balme, S.; Allegretti, L.; Mannori, S.

2014-01-01

To operate advanced plasma scenario (long pulse with high stored energy) in present and future tokamak devices under safe operation conditions, the control requirements of the plasma control system (PCS) leads to the development of advanced feedback control and real time handling exceptions. To develop these controllers and these exceptions handling strategies, a project aiming at setting up a flight simulator has started at CEA in 2009. Now, the new WEST (W Environment in Steady-state Tokamak) project deals with modifying Tore Supra into an ITER-like divertor tokamak. This upgrade impacts a lot of systems including Tore Supra PCS and is the opportunity to improve the current PCS architecture to implement the previous works and to fulfill the needs of modern tokamak operation. This paper is dealing with the description of the architecture of WEST PCS. Firstly, the requirements will be presented including the needs of new concepts (segments configuration, alternative (or backup) scenario, …). Then, the conceptual design of the PCS will be described including the main components and their functions. The third part will be dedicated to the proposal RT framework and to the technologies that we have to implement to reach the requirements

Simple Urban Simulation Atop Complicated Models: Multi-Scale Equation-Free Computing of Sprawl Using Geographic Automata

Directory of Open Access Journals (Sweden)

Yu Zou

2013-07-01

Full Text Available Reconciling competing desires to build urban models that can be simple and complicated is something of a grand challenge for urban simulation. It also prompts difficulties in many urban policy situations, such as urban sprawl, where simple, actionable ideas may need to be considered in the context of the messily complex and complicated urban processes and phenomena that work within cities. In this paper, we present a novel architecture for achieving both simple and complicated realizations of urban sprawl in simulation. Fine-scale simulations of sprawl geography are run using geographic automata to represent the geographical drivers of sprawl in intricate detail and over fine resolutions of space and time. We use Equation-Free computing to deploy population as a coarse observable of sprawl, which can be leveraged to run automata-based models as short-burst experiments within a meta-simulation framework.

Functional Detachment of Totalitarian Nazi Architecture

Science.gov (United States)

Antoszczyszyn, Marek

2017-10-01

The paper describes the systematization process of architectural styles in use during Nazi period in Germany between 1933-45. In the results of the research some regularity about strict concern between function & styling has been observed. Using comparison & case study as well as analytical methods there were pointed out characteristic features of more than 500 objects’ architectural appearance that helped to specify their styling & group them into architectural trends. Ultimately the paper proves that the found trends of architectural styling could be collected by functional detachment key. This observation explains easy to recognize even nowadays traceability - so characteristic to Nazi German architecture. Facing today pluralism in architecture, the findings could be a helpful key in the organization of spatial architectural identification process.

Telemedicine system interoperability architecture: concept description and architecture overview.

Energy Technology Data Exchange (ETDEWEB)

Craft, Richard Layne, II

2004-05-01

In order for telemedicine to realize the vision of anywhere, anytime access to care, it must address the question of how to create a fully interoperable infrastructure. This paper describes the reasons for pursuing interoperability, outlines operational requirements that any interoperability approach needs to consider, proposes an abstract architecture for meeting these needs, identifies candidate technologies that might be used for rendering this architecture, and suggests a path forward that the telemedicine community might follow.

CogWnet: A Resource Management Architecture for Cognitive Wireless Networks

KAUST Repository

Alqerm, Ismail

2013-07-01

With the increasing adoption of wireless communication technologies, there is a need to improve management of existing radio resources. Cognitive radio is a promising technology to improve the utilization of wireless spectrum. Its operating principle is based on building an integrated hardware and software architecture that configures the radio to meet application requirements within the constraints of spectrum policy regulations. However, such an architecture must be able to cope with radio environment heterogeneity. In this paper, we propose a cognitive resource management architecture, called CogWnet, that allocates channels, re-configures radio transmission parameters to meet QoS requirements, ensures reliability, and mitigates interference. The architecture consists of three main layers: Communication Layer, which includes generic interfaces to facilitate the communication between the cognitive architecture and TCP/IP stack layers; Decision-Making Layer, which classifies the stack layers input parameters and runs decision-making optimization algorithms to output optimal transmission parameters; and Policy Layer to enforce policy regulations on the selected part of the spectrum. The efficiency of CogWnet is demonstrated through a testbed implementation and evaluation.

A New Perspective On Architectural Sustainability

DEFF Research Database (Denmark)

Hermund, Anders; Klint, Lars; Schipull Kauschen, Jan

2013-01-01

The research presented in this paper intends to establish a new perspective on architectural sustainability as an effect of good architectural quality. The intention is to show the importance of an actual architectural mindset in the design phase, and whether the conscious architectural material...

A method for valuing architecture-based business transformation and measuring the value of solutions architecture

OpenAIRE

Slot, R.G.

2010-01-01

Enterprise and Solution Architecture are key in today’s business environment. It is surprising that the foundation and business case for these activities are nonexistent; the financial value for the business of these activities is largely undetermined. To determine business value of enterprise and solution architecture, this thesis shows how to measure and quantify, in business terms, the value of enterprise architecture-based on business transformation and the value of solution architecture.

Urban Sustainability through Public Architecture

Directory of Open Access Journals (Sweden)

Soomi Kim

2018-04-01

Full Text Available As the sustainability of contemporary cities has gained emphasis, interest in architecture has increased, due to its social and public responsibility. Since sustainability is linked to public values, research on sustainable public spaces is an important way to secure sustainability in cities. Based on this, we analyzed the sustainability of European cities by examining the design methods of public architecture according to the region. The aim of the study is to derive architectural methodology corresponding to local characteristics, and to suggest issues to consider in public architecture design to promote urban sustainability based on this. First, regarding the environmental aspect, it can be observed that there is an effort to secure sustainability. Second, in terms of social sustainability, historical value remains as a trace of architectural place, so that it continues in people’s memory. In addition, public architecture provides public places where citizens can gather and enjoy programs, while the architectural methods showed differences influenced by cultural conditions. Third, in economic sustainability, it was shown that energy saving was achieved through cost reduction through recycling of materials, facilities, or environmental factors. In conclusion, the issues to be considered in public architectural design are the voiding of urban space through architectural devices in the construction method. In other words, the intention is to form “ground” that attempts to be part of the city, and thereby create better places. Since skin and material have a deep relationship with the environment, they should have the durability and an outer skin that are suitable for the regional environment. Finally, sustainability is to be utilized through the influx of programs that meet local and environmental characteristics. Design research into public architecture that is oriented towards urban sustainability will be a task to be carried out by the

Domain architecture conservation in orthologs

Science.gov (United States)

2011-01-01

Background As orthologous proteins are expected to retain function more often than other homologs, they are often used for functional annotation transfer between species. However, ortholog identification methods do not take into account changes in domain architecture, which are likely to modify a protein's function. By domain architecture we refer to the sequential arrangement of domains along a protein sequence. To assess the level of domain architecture conservation among orthologs, we carried out a large-scale study of such events between human and 40 other species spanning the entire evolutionary range. We designed a score to measure domain architecture similarity and used it to analyze differences in domain architecture conservation between orthologs and paralogs relative to the conservation of primary sequence. We also statistically characterized the extents of different types of domain swapping events across pairs of orthologs and paralogs. Results The analysis shows that orthologs exhibit greater domain architecture conservation than paralogous homologs, even when differences in average sequence divergence are compensated for, for homologs that have diverged beyond a certain threshold. We interpret this as an indication of a stronger selective pressure on orthologs than paralogs to retain the domain architecture required for the proteins to perform a specific function. In general, orthologs as well as the closest paralogous homologs have very similar domain architectures, even at large evolutionary separation. The most common domain architecture changes observed in both ortholog and paralog pairs involved insertion/deletion of new domains, while domain shuffling and segment duplication/deletion were very infrequent. Conclusions On the whole, our results support the hypothesis that function conservation between orthologs demands higher domain architecture conservation than other types of homologs, relative to primary sequence conservation. This supports the

Research Through Architecture

DEFF Research Database (Denmark)

Peder Pedersen, Claus

2018-01-01

Presentation of the PhD research at the Aarhus School of Architecture and selected PhD projects in relation to PhD exhibition at Godsbanen.......Presentation of the PhD research at the Aarhus School of Architecture and selected PhD projects in relation to PhD exhibition at Godsbanen....

New Energy Architecture. Myanmar

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-15

A global transition towards a new energy architecture is under way, driven by countries' need to respond to the changing dynamics of economic growth, environmental sustainability and energy security. The World Economic Forum, in collaboration with Accenture, has created the New Energy Architecture Initiative to address and accelerate this transition. The Initiative supports the development of national strategies and policy frameworks as countries seek to achieve the combined goals of energy security and access, sustainability, and economic growth and development. The World Economic Forum has formed a partnership with the Ministry of Energy of Myanmar to help apply the Initiative's approach to this developing and resource-rich nation. The Asian Development Bank and the World Economic Forum's Project Adviser, Accenture, have collaborated with the Forum on this consultation process, and have been supported by relevant government, industry and civil society stakeholders. The consultation process aims to understand the nation's current energy architecture challenges and provide an overview of a path to a New Energy Architecture through a series of insights. These insights could form the basis for a long-term multistakeholder roadmap to build Myanmar's energy sector in a way that is secure and sustainable, and promotes economic growth as the country makes its democratic transition. While not all recommendations can be implemented in the near term, they do provide options for creating a prioritized roadmap for Myanmar's energy transition. This report is the culmination of a nine-month multistakeholder process investigating Myanmar's energy architecture. Over the course of many visits to the country, the team has conducted numerous interviews, multistakeholder workshops, and learning and data-gathering exercises to ensure a comprehensive range of information and views. The team has also engaged with a variety of stakeholders to better inform their findings, which have come

New Energy Architecture. Myanmar

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-15

A global transition towards a new energy architecture is under way, driven by countries' need to respond to the changing dynamics of economic growth, environmental sustainability and energy security. The World Economic Forum, in collaboration with Accenture, has created the New Energy Architecture Initiative to address and accelerate this transition. The Initiative supports the development of national strategies and policy frameworks as countries seek to achieve the combined goals of energy security and access, sustainability, and economic growth and development. The World Economic Forum has formed a partnership with the Ministry of Energy of Myanmar to help apply the Initiative's approach to this developing and resource-rich nation. The Asian Development Bank and the World Economic Forum's Project Adviser, Accenture, have collaborated with the Forum on this consultation process, and have been supported by relevant government, industry and civil society stakeholders. The consultation process aims to understand the nation's current energy architecture challenges and provide an overview of a path to a New Energy Architecture through a series of insights. These insights could form the basis for a long-term multistakeholder roadmap to build Myanmar's energy sector in a way that is secure and sustainable, and promotes economic growth as the country makes its democratic transition. While not all recommendations can be implemented in the near term, they do provide options for creating a prioritized roadmap for Myanmar's energy transition. This report is the culmination of a nine-month multistakeholder process investigating Myanmar's energy architecture. Over the course of many visits to the country, the team has conducted numerous interviews, multistakeholder workshops, and learning and data-gathering exercises to ensure a comprehensive range of information and views. The team has also engaged with a variety of stakeholders to better

Modular architectures for quantum networks

Science.gov (United States)

Pirker, A.; Wallnöfer, J.; Dür, W.

2018-05-01

We consider the problem of generating multipartite entangled states in a quantum network upon request. We follow a top-down approach, where the required entanglement is initially present in the network in form of network states shared between network devices, and then manipulated in such a way that the desired target state is generated. This minimizes generation times, and allows for network structures that are in principle independent of physical links. We present a modular and flexible architecture, where a multi-layer network consists of devices of varying complexity, including quantum network routers, switches and clients, that share certain resource states. We concentrate on the generation of graph states among clients, which are resources for numerous distributed quantum tasks. We assume minimal functionality for clients, i.e. they do not participate in the complex and distributed generation process of the target state. We present architectures based on shared multipartite entangled Greenberger–Horne–Zeilinger states of different size, and fully connected decorated graph states, respectively. We compare the features of these architectures to an approach that is based on bipartite entanglement, and identify advantages of the multipartite approach in terms of memory requirements and complexity of state manipulation. The architectures can handle parallel requests, and are designed in such a way that the network state can be dynamically extended if new clients or devices join the network. For generation or dynamical extension of the network states, we propose a quantum network configuration protocol, where entanglement purification is used to establish high fidelity states. The latter also allows one to show that the entanglement generated among clients is private, i.e. the network is secure.

Architecture for Data Management

OpenAIRE

Vukolic, Marko

2015-01-01

In this document we present the preliminary architecture of the SUPERCLOUD data management and storage. We start by defining the design requirements of the architecture, motivated by use cases and then review the state-of-the-art. We survey security and dependability technologies and discuss designs for the overall unifying architecture for data management that serves as an umbrella for different security and dependability data management features. Specifically the document lays out the archi...

A New Perspective On Architectural Sustainability

DEFF Research Database (Denmark)

Hermund, Anders; Klint, Lars; Schipull Kauschen, Jan

2013-01-01

The research presented in this paper intends to establish a new perspective on architectural sustainability as an effect of good architectural quality. The intention is to show the importance of an actual architectural mindset in the design phase, and whether the conscious architectural material...... selection based on a balanced cost and aesthetics decision making will prove more sustainable and ensure better maintenance, as a result of architectural appeal, than cheaper standard houses....

Efficient electroluminescence from a perylenediimide fluorophore obtained from a simple solution processed OLED

International Nuclear Information System (INIS)

Cespedes-Guirao, F J; Fernandez-Lazaro, F; Sastre-Santos, A; Garcia-Santamaria, S; Bolink, H J

2009-01-01

Simple solution processed organic light emitting diodes are used to screen the performance of two types of highly efficient, narrow band red emitting fluorescent perylenediimides (PDIs). PDIs substituted at the diimide positions seem to form aggregates in the thin film architecture as evidenced by the shifted electroluminescent spectrum. When substituted on the bay position and when used both as the emitting and the electron transporting specie, bright electroluminescence with a narrow width around 610 nm reaching 500 cd m -2 at moderate voltages was observed, demonstrating the usefulness of these fluorophores for OLED applications.

How architecture students gain and apply knowledge of sustainable architecture

DEFF Research Database (Denmark)

Donovan, Elizabeth; Holder, Anna

2016-01-01

understandings of how architects synthesise different types of knowledge while designing, raising questions about the ‘match’ between educational experiences and subsequent behaviours in practice. Taking an example from Denmark, we outline the approach of Aarhus School of Architecture, where sustainability...... teaching is partially integrated within the design studio courses. We compare the institution’s philosophy for sustainability with pedagogical approaches as practiced within the school. An empirical study was made of 2nd year architecture student experiences of a one-month introduction course to ‘Reuse...... to be supported in gaining different types of knowledge (ie. propositional, experiential, applied) through different modes of learning. There are gaps to be bridged in education in order for the sustainability agenda to be fully integrated in architectural practice....

Introducing regenerative design and circularity into architectural and engineering curriculum

OpenAIRE

Attia, Shady

2016-01-01

Looking today to the challenges for planning and design of sustainable built environment including, carbon emissions, climate change, human health, water problems, biodiversity, scarcity of resources, depletion of fossil fuel, population growth and urbanization; sustainable architecture will play a key role for the sustainable development of society as a whole. In the context of an architectural design studio, this paper presents the experience of introducing the concept of regenerative desig...

The genetic architecture of type 2 diabetes

NARCIS (Netherlands)

Fuchsberger, Christian; Flannick, Jason; Teslovich, Tanya M.; Mahajan, Anubha; Agarwala, Vineeta; Gaulton, Kyle J.; Ma, Clement; Fontanillas, Pierre; Moutsianas, Loukas; McCarthy, Davis J.; Rivas, Manuel A.; Perry, John R. B.; Sim, Xueling; Blackwell, Thomas W.; Robertson, Neil R.; Rayner, N. William; Cingolani, Pablo; Locke, Adam E.; Fernandez Tajes, Juan; Highland, Heather M.; Dupuis, Josee; Chines, Peter S.; Lindgren, Cecilia M.; Hartl, Christopher; Jackson, Anne U.; Chen, Han; Huyghe, Jeroen R.; van de Bunt, Martijn; Pearson, Richard D.; Kumar, Ashish; Müller-Nurasyid, Martina; Grarup, Niels; Stringham, Heather M.; Gamazon, Eric R.; Lee, Jaehoon; Chen, Yuhui; Scott, Robert A.; Below, Jennifer E.; Chen, Peng; Huang, Jinyan; Go, Min Jin; Stitzel, Michael L.; Pasko, Dorota; Parker, Stephen C. J.; Varga, Tibor V.; Green, Todd; Beer, Nicola L.; Day-Williams, Aaron G.; Ferreira, Teresa; Fingerlin, Tasha; Horikoshi, Momoko; Hu, Cheng; Huh, Iksoo; Ikram, Mohammad Kamran; Kim, Bong-Jo; Kim, Yongkang; Kim, Young Jin; Kwon, Min-Seok; Lee, Juyoung; Lee, Selyeong; Lin, Keng-Han; Maxwell, Taylor J.; Nagai, Yoshihiko; Wang, Xu; Welch, Ryan P.; Yoon, Joon; Zhang, Weihua; Barzilai, Nir; Voight, Benjamin F.; Han, Bok-Ghee; Jenkinson, Christopher P.; Kuulasmaa, Teemu; Kuusisto, Johanna; Manning, Alisa; Ng, Maggie C. Y.; Palmer, Nicholette D.; Balkau, Beverley; Stancáková, Alena; Abboud, Hanna E.; Boeing, Heiner; Giedraitis, Vilmantas; Prabhakaran, Dorairaj; Gottesman, Omri; Scott, James; Carey, Jason; Kwan, Phoenix; Grant, George; Smith, Joshua D.; Neale, Benjamin M.; Purcell, Shaun; Butterworth, Adam S.; Howson, Joanna M. M.; Lee, Heung Man; Lu, Yingchang; Kwak, Soo-Heon; Zhao, Wei; Danesh, John; Lam, Vincent K. L.; Park, Kyong Soo; Saleheen, Danish; So, Wing Yee; Tam, Claudia H. T.; Afzal, Uzma; Aguilar, David; Arya, Rector; Aung, Tin; Chan, Edmund; Navarro, Carmen; Cheng, Ching-Yu; Palli, Domenico; Correa, Adolfo; Curran, Joanne E.; Rybin, Denis; Farook, Vidya S.; Fowler, Sharon P.; Freedman, Barry I.; Griswold, Michael; Hale, Daniel Esten; Hicks, Pamela J.; Khor, Chiea-Chuen; Kumar, Satish; Lehne, Benjamin; Thuillier, Dorothée; Lim, Wei Yen; Liu, Jianjun; van der Schouw, Yvonne T.; Loh, Marie; Musani, Solomon K.; Puppala, Sobha; Scott, William R.; Yengo, Loïc; Tan, Sian-Tsung; Taylor, Herman A.; Thameem, Farook; Wilson, Gregory; Wong, Tien Yin; Njølstad, Pål Rasmus; Levy, Jonathan C.; Mangino, Massimo; Bonnycastle, Lori L.; Schwarzmayr, Thomas; Fadista, João; Surdulescu, Gabriela L.; Herder, Christian; Groves, Christopher J.; Wieland, Thomas; Bork-Jensen, Jette; Brandslund, Ivan; Christensen, Cramer; Koistinen, Heikki A.; Doney, Alex S. F.; Kinnunen, Leena; Esko, Tõnu; Farmer, Andrew J.; Hakaste, Liisa; Hodgkiss, Dylan; Kravic, Jasmina; Lyssenko, Valeriya; Hollensted, Mette; Jørgensen, Marit E.; Jørgensen, Torben; Ladenvall, Claes; Justesen, Johanne Marie; Käräjämäki, Annemari; Kriebel, Jennifer; Rathmann, Wolfgang; Lannfelt, Lars; Lauritzen, Torsten; Narisu, Narisu; Linneberg, Allan; Melander, Olle; Milani, Lili; Neville, Matt; Orho-Melander, Marju; Qi, Lu; Qi, Qibin; Roden, Michael; Rolandsson, Olov; Swift, Amy; Rosengren, Anders H.; Stirrups, Kathleen; Wood, Andrew R.; Mihailov, Evelin; Blancher, Christine; Carneiro, Mauricio O.; Maguire, Jared; Poplin, Ryan; Shakir, Khalid; Fennell, Timothy; DePristo, Mark; Hrabé de Angelis, Martin; Deloukas, Panos; Gjesing, Anette P.; Jun, Goo; Nilsson, Peter; Murphy, Jacquelyn; Onofrio, Robert; Thorand, Barbara; Hansen, Torben; Meisinger, Christa; Hu, Frank B.; Isomaa, Bo; Karpe, Fredrik; Liang, Liming; Peters, Annette; Huth, Cornelia; O'Rahilly, Stephen P.; Palmer, Colin N. A.; Pedersen, Oluf; Rauramaa, Rainer; Tuomilehto, Jaakko; Salomaa, Veikko; Watanabe, Richard M.; Syvänen, Ann-Christine; Bergman, Richard N.; Bharadwaj, Dwaipayan; Bottinger, Erwin P.; Cho, Yoon Shin; Chandak, Giriraj R.; Chan, Juliana C. N.; Chia, Kee Seng; Daly, Mark J.; Ebrahim, Shah B.; Langenberg, Claudia; Elliott, Paul; Jablonski, Kathleen A.; Lehman, Donna M.; Jia, Weiping; Ma, Ronald C. W.; Pollin, Toni I.; Sandhu, Manjinder; Tandon, Nikhil; Froguel, Philippe; Barroso, Inês; teo, Yik Ying; Zeggini, Eleftheria; Loos, Ruth J. F.; Small, Kerrin S.; Ried, Janina S.; DeFronzo, Ralph A.; Grallert, Harald; Glaser, Benjamin; Metspalu, Andres; Wareham, Nicholas J.; Walker, Mark; Banks, Eric; Gieger, Christian; Ingelsson, Erik; Im, Hae Kyung; Illig, Thomas; Franks, Paul W.; Buck, Gemma; Trakalo, Joseph; Buck, David; Prokopenko, Inga; Mägi, Reedik; Lind, Lars; Farjoun, Yossi; Owen, Katharine R.; Gloyn, Anna L.; Strauch, Konstantin; Tuomi, Tiinamaija; Kooner, Jaspal Singh; Lee, Jong-Young; Park, Taesung; Donnelly, Peter; Morris, Andrew D.; Hattersley, Andrew T.; Bowden, Donald W.; Collins, Francis S.; Atzmon, Gil; Chambers, John C.; Spector, Timothy D.; Laakso, Markku; Strom, Tim M.; Bell, Graeme I.; Blangero, John; Duggirala, Ravindranath; Tai, E. Shyong; McVean, Gilean; Hanis, Craig L.; Wilson, James G.; Seielstad, Mark; Frayling, Timothy M.; Meigs, James B.; Cox, Nancy J.; Sladek, Rob; Lander, Eric S.; Gabriel, Stacey; Burtt, Noël P.; Mohlke, Karen L.; Meitinger, Thomas; Groop, Leif; Abecasis, Goncalo; Florez, Jose C.; Scott, Laura J.; Morris, Andrew P.; Kang, Hyun Min; Boehnke, Michael; Altshuler, David; McCarthy, Mark I.

2016-01-01

The genetic architecture of common traits, including the number, frequency, and effect sizes of inherited variants that contribute to individual risk, has been long debated. Genome-wide association studies have identified scores of common variants associated with type 2 diabetes, but in aggregate,

The genetic architecture of type 2 diabetes

DEFF Research Database (Denmark)

Fuchsberger, Christian; Flannick, Jason; Teslovich, Tanya M

2016-01-01

The genetic architecture of common traits, including the number, frequency, and effect sizes of inherited variants that contribute to individual risk, has been long debated. Genome-wide association studies have identified scores of common variants associated with type 2 diabetes, but in aggregate...

INTEGRATED INFORMATION SYSTEM ARCHITECTURE PROVIDING BEHAVIORAL FEATURE

Directory of Open Access Journals (Sweden)

Vladimir N. Shvedenko

2016-11-01

Full Text Available The paper deals with creation of integrated information system architecture capable of supporting management decisions using behavioral features. The paper considers the architecture of information decision support system for production system management. The behavioral feature is given to an information system, and it ensures extraction, processing of information, management decision-making with both automated and automatic modes of decision-making subsystem being permitted. Practical implementation of information system with behavior is based on service-oriented architecture: there is a set of independent services in the information system that provides data of its subsystems or data processing by separate application under the chosen variant of the problematic situation settlement. For creation of integrated information system with behavior we propose architecture including the following subsystems: data bus, subsystem for interaction with the integrated applications based on metadata, business process management subsystem, subsystem for the current state analysis of the enterprise and management decision-making, behavior training subsystem. For each problematic situation a separate logical layer service is created in Unified Service Bus handling problematic situations. This architecture reduces system information complexity due to the fact that with a constant amount of system elements the number of links decreases, since each layer provides communication center of responsibility for the resource with the services of corresponding applications. If a similar problematic situation occurs, its resolution is automatically removed from problem situation metamodel repository and business process metamodel of its settlement. In the business process performance commands are generated to the corresponding centers of responsibility to settle a problematic situation.

Architecture Approach in System Development

Directory of Open Access Journals (Sweden)

Ladislav Burita

2017-01-01

Full Text Available The purpose of this paper is to describe a practical solution of architecture approach in system development. The software application is the system which optimizes the transport service. The first part of the paper defines the enterprise architecture, its parts and frameworks. Next is explained the NATO Architecture Framework (NAF, a tool for command and control systems development in military environment. The NAF is used for architecture design of the system for optimization of the transport service.

Enterprise architecture for business success

CERN Document Server

Wijegunaratne, Inji; Evans-Greenwood, Peter

2014-01-01

Enterprise Architecture (EA) has evolved to become a prominent presence in today's information systems and technology landscape. The EA discipline is rich in frameworks, methodologies, and the like. However, the question of 'value' for business ;professionals remains largely unanswered - that is, how best can Enterprise Architecture and Enterprise Architects deliver value to the enterprise? Enterprise Architecture for Business Success answers this question. Enterprise Architecture for Business Success is primarily intended for IT professionals working in the area of Enterprise Architectu

A COMPUTER APPLICATION FOR THE ARCHITECTURAL PROGRAM DEVELOPMENT IN DESIGN EDUCATION

Directory of Open Access Journals (Sweden)

Daniel de Carvalho Moreira

2012-02-01

Full Text Available The development of the architectural program in the design studio faces several difficulties. The purpose of the program is to describe the conditions where the building being designed will operate; this requires a lot of information and organization. Due to its complexity, the architetural program definition in the disciplines of design is often simplified. This article discusses such issue and proposes a computer application (SINFORMA that gathers information about the building and the theme of the project in order to develop the architectural program based on structures proposed by bibliographic references. The SINFORMA is composed by a framework which includes a data base and modules which analyze and organize functional requirements, according to the Problem Seeking method and the contemporary values of architecture enumerated by Hershberger. It is discussed how the application can be applied in design education and how it offers students a practical approach and a comprehensive data analysis for the design of built environment. Keywords: Architectural programming, Architectural design, Education.

Architecture is always in the middle…

Directory of Open Access Journals (Sweden)

Tim Gough

2015-12-01

Full Text Available This essay proposes an ontology of architecture that takes its lead from the bread and butter of architecture: a flat ontology opposed to Cartesianism in the sense that no differentiation between realms (body/mind, high/low is accepted. The work of Spinoza and Deleuze is referred to in order to flesh out such an ontology, whose aim is to destroy the very desire for architecture and architectural theory to even pose the question about the difference between bread-and-butter architecture and high architecture. Architecture is shown to be of the nature of an assemblage, of a machine or a haecceity (to use Deleuze and Guattari’s phrase, and the implications of this in relation to the question of composition and reception are outlined.

Business value of solution architecture

NARCIS (Netherlands)

Slot, R.; Dedene, G.; Maes, R.; Proper, E.; Harmsen, F.; Dietz, J.L.G.

2009-01-01

The theory and especially the practice of IT architecture have been developed quite vigorously the last years. However, hardly any quantitative data about the value of IT architecture is available. This paper presents the results of a study, which measures the value of IT solution architecture for

Low-Power Architecture for an Optical Life Gas Analyzer

Science.gov (United States)

Pilgrim, Jeffrey; Vakhtin, Andrei

2012-01-01

Analog and digital electronic control architecture has been combined with an operating methodology for an optical trace gas sensor platform that allows very low power consumption while providing four independent gas measurements in essentially real time, as well as a user interface and digital data storage and output. The implemented design eliminates the cross-talk between the measurement channels while maximizing the sensitivity, selectivity, and dynamic range for each measured gas. The combination provides for battery operation on a simple camcorder battery for as long as eight hours. The custom, compact, rugged, self-contained design specifically targets applications of optical major constituent and trace gas detection for multiple gases using multiple lasers and photodetectors in an integrated package.

Flexible weapons architecture design

OpenAIRE

Pyant, William C.

2015-01-01

Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilia...

Architecture in Everyday Life

OpenAIRE

Costa Agarez, Ricardo

2015-01-01

For most architects, architecture is not only art, craft, passion and engagement; it is their ‘bread-and-butter’, too, and has been so since long. Architecture, consciously or unconsciously, is also the ‘bread-and-butter’ of communities across the world: successfully or unsuccessfully it is part of the daily lives of ordinary women and men. Yet practitioners, theoreticians and historians of architecture often disregard the more quotidian side of the discipline, a neglect that is inversely pro...

Experiencing a Problem-Based Learning Approach for Teaching Reconfigurable Architecture Design

Directory of Open Access Journals (Sweden)

Erwan Fabiani

2009-01-01

Full Text Available This paper presents the “reconfigurable computing” teaching part of a computer science master course (first year on parallel architectures. The practical work sessions of this course rely on active pedagogy using problem-based learning, focused on designing a reconfigurable architecture for the implementation of an application class of image processing algorithms. We show how the successive steps of this project permit the student to experiment with several fundamental concepts of reconfigurable computing at different levels. Specific experiments include exploitation of architectural parallelism, dataflow and communicating component-based design, and configurability-specificity tradeoffs.