Inhibition of HIV by Legalon-SIL is independent of its effect on cellular metabolism

Energy Technology Data Exchange (ETDEWEB)

McClure, Janela [Department of Laboratory Medicine, University of Washington, Seattle, WA (United States); Margineantu, Daciana H. [Department of Clinical Research, Fred Hutchinson Cancer Research Center, Seattle, WA (United States); Sweet, Ian R. [Department of Medicine (Division of Metabolism, Endocrinology, and Nutrition), University of Washington, Seattle, WA (United States); Polyak, Stephen J., E-mail: polyak@uw.edu [Department of Laboratory Medicine, University of Washington, Seattle, WA (United States); Department of Global Health, University of Washington, Seattle, WA (United States)

2014-01-20

In this report, we further characterized the effects of silibinin (SbN), derived from milk thistle extract, and Legalon-SIL (SIL), a water-soluble derivative of SbN, on T cell metabolism and HIV infection. We assessed the effects of SbN and SIL on peripheral blood mononuclear cells (PBMC) and CEM-T4 cells in terms of cellular growth, ATP content, metabolism, and HIV infection. SIL and SbN caused a rapid and reversible (upon removal) decrease in cellular ATP levels, which was associated with suppression of mitochondrial respiration and glycolysis. SbN, but not SIL inhibited glucose uptake. Exposure of T cells to SIL (but not SbN or metabolic inhibitors) during virus adsorption blocked HIV infection. Thus, both SbN and SIL rapidly perturb T cell metabolism in vitro, which may account for its anti-inflammatory and anti-proliferative effects that arise with prolonged exposure of cells. However, the metabolic effects are not involved in SIL's unique ability to block HIV entry. - Highlights: • Silibinin (SbN) and Legalon-SIL (SIL) are cytoprotective mixtures of natural products. • SbN and SIL reduce T cell oxidative phosphorylation and glycolysis in vitro. • SIL but not SbN blocks entry of multiple HIV isolates into T cells in vitro. • SIL's suppression of HIV appears independent of its effects on T cell metabolism. • Metabolic effects of SIL and SbN may be relevant in inflammatory diseases.

Inhibition of HIV by Legalon-SIL is independent of its effect on cellular metabolism

International Nuclear Information System (INIS)

McClure, Janela; Margineantu, Daciana H.; Sweet, Ian R.; Polyak, Stephen J.

2014-01-01

In this report, we further characterized the effects of silibinin (SbN), derived from milk thistle extract, and Legalon-SIL (SIL), a water-soluble derivative of SbN, on T cell metabolism and HIV infection. We assessed the effects of SbN and SIL on peripheral blood mononuclear cells (PBMC) and CEM-T4 cells in terms of cellular growth, ATP content, metabolism, and HIV infection. SIL and SbN caused a rapid and reversible (upon removal) decrease in cellular ATP levels, which was associated with suppression of mitochondrial respiration and glycolysis. SbN, but not SIL inhibited glucose uptake. Exposure of T cells to SIL (but not SbN or metabolic inhibitors) during virus adsorption blocked HIV infection. Thus, both SbN and SIL rapidly perturb T cell metabolism in vitro, which may account for its anti-inflammatory and anti-proliferative effects that arise with prolonged exposure of cells. However, the metabolic effects are not involved in SIL's unique ability to block HIV entry. - Highlights: • Silibinin (SbN) and Legalon-SIL (SIL) are cytoprotective mixtures of natural products. • SbN and SIL reduce T cell oxidative phosphorylation and glycolysis in vitro. • SIL but not SbN blocks entry of multiple HIV isolates into T cells in vitro. • SIL's suppression of HIV appears independent of its effects on T cell metabolism. • Metabolic effects of SIL and SbN may be relevant in inflammatory diseases

Research System Integration Laboratory (SIL)

Data.gov (United States)

Federal Laboratory Consortium — The VEA Research SIL (VRS) is essential to the success of the TARDEC 30-Year Strategy. The vast majority of the TARDEC Capability Sets face challenging electronics...

Localization and analysis of error sources for the numerical SIL proof; Lokalisierung und Analyse von Fehlerquellen beim numerischen SIL-Nachweis

Energy Technology Data Exchange (ETDEWEB)

Duepont, D.; Litz, L. [Technische Univ. Kaiserslautern (Germany). Lehrstuhl fuer Automatisierungstechnik; Netter, P. [Infraserv GmbH und Co. Hoechst KG, Frankfurt am Main (Germany)

2008-07-01

According to the standard IEC 61511 each safety-related loop is assigned to one of the four Safety Integrity Levels (SILs). For every safety-related loop a SIL-specific Probability of Failure on Demand (PFD) must be proven. Usually, the PFD calculation is performed based upon the failure rates of each loop component aided by commercial software tools. However, this bottom-up approach suffers from many uncertainties. Especially, a lack of reliable failure rate data causes many problems. Reference data collected in different environments are available to solve this situation. However, this pragmatism leads to a PFD bandwidth, not to a single PFD value as desired. In order to make a decision for a numerical value appropriate for the chemical and pharmaceutical process industry a data ascertainment has been initiated by the European NAMUR. Its results display large deficiencies for the bottom-up approach. The error sources leading to this situation are located and analyzed. (orig.)

Silêncio nas organizações: uma revisão e discussão da literatura.

Directory of Open Access Journals (Sweden)

Marcos Júnior de Moura-Paula

2014-10-01

Full Text Available O objetivo deste trabalho é apresentar como o silêncio tem sido estudado por pesquisadores de gestão ou áreas afins (como psicologia ou comunicação organizacionais. Ignorado por longo tempo, o silêncio emerge como uma área frutífera de pesquisa devido a diversas consequências que ele pode causar para os empregados (estresse, angústia, baixa autoestima e dissonância cognitiva, para as organizações (absenteísmo, maior rotatividade, baixa produtividade e para a sociedade (não denúncia de ilegalidades cometidas pelas organizações. Faz-se um levantamento bibliográfico com base na divisão em três ondas de pesquisa sobre a evolução dos estudos de voz e silêncio nas organizações baseado em Brinsfield, Edwards e Greenberg (2009, com foco no silêncio. Da primeira onda (1970-1980 são apresentados: o conceito de voz e a subsunção do silêncio ao conceito de lealdade; as “espirais de silêncio” e o “efeito mudo” (MUM effect. Da segunda onda (1980-2000: a “denúncia de irregularidades organizacionais” (whistleblowing; a “discordância organizacional baseada em princípios” (principled organizational dissent; a justiça organizacional; a “promoção de questões” (issue selling; a cidadania organizacional; o ostracismo social e a “síndrome do surdo” (deaf-ear syndrome. Da terceira onda (2000 em diante: o silêncio organizacional; o silêncio dos empregados; retirada do trabalho (job withdrawal; aprendizagem organizacional e transferência de conhecimento. Observou-se que as pesquisas, principalmente no caso da terceira onda, têm evoluído de pesquisas conceituais e qualitativas para pesquisas quantitativas, havendo questionamentos de alguns pesquisadores sobre a necessidade de se utilizar outras abordagens teórico-metodológicas além das de inspiração positivista. A pesquisa brasileira sobre silêncio, apesar do pequeno volume, contribui para a compreensão do fenômeno na medida em que se insere na

Clinical significance of determination of serum IGF-I and SIL-2R levels in patients with prostatic cancer

International Nuclear Information System (INIS)

Zhang Zaigao; Lv Yuliang; Li Jiacheng

2006-01-01

Objective: To investigate the significance of changes of serum IGF-I and SIL-2R levels in patients with prostatic cancer. Methods: Serum IGF-I levels (with RIA) and SIL-2R levels (with ELISA) were measured in 31 patients with prostatic cancer and 30 controls. Results: Serum levels of IGF-I and SIL-2R in the 31 patients were significantly higher than those in controls (P<0.01), serum IGF-I and SIL-2R levels were mutually positively correlated (r=0.6182, P<0.01). Conclusion: Serum IGF-I and SIL-2R were useful markers for prostatic cancer. (authors)

Le cas du Brésil

International Development Research Centre (IDRC) Digital Library (Canada)

pwust

important volet des activités de coopération du Brésil dans les pays en développement, ...... attention à l'Amérique latine ou aux Caraïbes, malgré la priorité accordée à .... prudente et sélective face aux opérations triangulaires, afin d'éviter la ...

Use of a Fibrinogen/Thrombin-Based Collagen Fleece (TachoComb, TachoSil) With a Stapled Closure to Prevent Pancreatic Fistula Formation Following Distal Pancreatectomy.

Science.gov (United States)

Mita, Kazuhito; Ito, Hideto; Murabayashi, Ryo; Asakawa, Hideki; Nabetani, Masashi; Kamasako, Akira; Koizumi, Kazuya; Hayashi, Takashi

2015-12-01

Postoperative pancreatic fistula formation remains a source of significant morbidity following distal pancreatectomy. The aim of this study was to evaluate the rate of clinically significant fistulas (International Study Group on Pancreatic Fistula grade B and grade C) after distal pancreatectomy using a fibrinogen/thrombin-based collagen fleece (TachoComb, TachoSil) with a stapled closure. Seventy-five patients underwent distal pancreatectomy at our institution between January 2005 and March 2014. A fibrinogen/thrombin-based collagen fleece was applied to the staple line of the pancreas before stapling. Twenty-six patients (34.7%) developed a pancreatic fistula, 8 patients (10.7%) developed a grade B fistula, and no patients developed a grade C fistula. The duration of the drain was significantly different in patients with or without a pancreatic fistula (8.0 ± 4.5 vs. 5.4 ± 1.3 days, P = .0003). Histological analysis showed that there was a tight covering with the fibrinogen/thrombin-based collagen fleece. The fibrinogen/thrombin-based collagen fleece (TachoComb, TachoSil) with a stapled closure has low rates of fistula formation and provides a safe alternative to the conventional stapled technique in distal pancreatectomy. © The Author(s) 2015.

Biocatalytically active silCoat-composites entrapping viable Escherichia coli.

Science.gov (United States)

Findeisen, A; Thum, O; Ansorge-Schumacher, M B

2014-02-01

Application of whole cells in industrial processes requires high catalytic activity, manageability, and viability under technical conditions, which can in principle be accomplished by appropriate immobilization. Here, we report the identification of carrier material allowing exceptionally efficient adsorptive binding of Escherichia coli whole cells hosting catalytically active carbonyl reductase from Candida parapsilosis (CPCR2). With the immobilizates, composite formation with both hydrophobic and hydrophilized silicone was achieved, yielding advanced silCoat-material and HYsilCoat-material, respectively. HYsilCoat-whole cells were viable preparations with a cell loading up to 400 mg(E. coli) · g(-1)(carrier) and considerably lower leaching than native immobilizates. SilCoat-whole cells performed particularly well in neat substrate exhibiting distinctly increased catalytic activity.

Le CRDI au Brésil

International Development Research Centre (IDRC) Digital Library (Canada)

Les recherches subventionnées par le CRDI au Brésil ont permis d'éclairer les débats sur nombre de questions, dont la démocratie, la croissance économique, la santé, les services sociaux, l'innovation, la foresterie et l'eau. Pendant la dictature militaire, qui a pris fin en 1985, le CRDI s'est employé à assurer la survie de la ...

Multi-domain virtual prototyping in a systemC SIL framework : a heating system case study

NARCIS (Netherlands)

Ilieskou, N.; Blom, M.; Somers, L.; Reniers, M.; Basten, T.

2015-01-01

This paper presents a proof-of-concept for a modular SystemC SIL (Software-in-the-Loop) simulation environment, using a blackboard-like architecture. The proposed SIL framework integrates embedded control software with simulators developed in SystemC/SystemC-AMS or external tools, like MATLAB. The

Blaise Cendrars e o Brasil: "Brésil, des hommes sont venus"

OpenAIRE

Wimmer, Norma [UNESP

2013-01-01

The paper intitled Blaise Cendrars and Brazil: Brésil, des hommes sont venus discusses the way Cendrars portrays Brazil, and also debates his influence on the artists of the Semana de Arte Moderna (Modern Art Week) in 1922. O texto intitulado Blaise Cendrars e o Brasil: Brésil, des hommes sont venus tece considerações acerca da perspectiva sob a qual Cendrars vê o Brasil, bem como de sua relação com os artistas da Semana de Arte Moderna de 1922.

Interim report for the project 'Competitive Food Processing in Norway' (NFR no 178280); Midtveis rapport for NFR prosjekt 178280

Energy Technology Data Exchange (ETDEWEB)

Nordtvedt, Tom Staale

2009-05-15

The report is an interim report for the project 'Competitive Food Processing in Norway' (NFR no 178280). It is part of a progress report of 1 June 2009. The project started in 2007. During this period a steering group has been established and 3 meetings have been organised. The Steering group represents different research and development organisations as well as the companies. Equipment for detection of ice fraction (several products) and core temperature has been developed in cooperation with Qvision. There is a strong commercial interest for equipment concerning core temperature. Application is linked to heating processes where an exact core temperature measurement e.g. for the production of sausages minimises energy consumption and increases the possibility of correct temperature measurement during the heating and cooling stages. Extensive testing has been carried out on chicken, salmon and cod in order to find the relation between super cooling methods and product quality. In this process cooperation has been established with equipment suppliers like Yara Praxair, Marel (Skaginn) and John Bean Technologies. The equipment is commercially available and the project has focused on adjusting for different products and comparison of methods. Also during this work the cooperation with representatives from the fisheries sector and the meat-processing industry has been advantageous. The project process requires close contact with all parties involved and project representatives participate in the further development of Nortura Steinkjaer's super cooling line as well as development and testing of Aker Seafood's lines for super-cooling of white-fish. The work is heavily integrated in other projects directed toward end-customers, while KMB Loennsom foredling has focused on in-plant super-cooling. The project follows it's schedule and no important corrections have been planned. (EW).

Clinical significance of changes of serum levels of SIL-2R and CEA in patients with lung cancer after chemotherapy

International Nuclear Information System (INIS)

Rui Zhilian

2004-01-01

Objective: To investigate the changes of serum levels of SIL-2R and CEA after chemotherapy in patients with lung cancer. Methods: Serum levels of SIL-2R (with ELISA) and CEA (with RIA) were measured in 31 patients with lung cancer both before and after chemotherapy as well as in 35 cantrols. Results: Before chemotherapy, both serum SIL-2R and CEA levels in the patients were significantly higher than those in the controls (P 0.05), but the serum SIL-2R levels in the patients remained significantly higher than those in the controls (P<0.05). Conclusion: Determination of changes of serum SIL-2R and CEA levels after chemotherapy might be helpful for predicting the treatment outcomes in patients with lung cancer. (author)

Quem Cala, Consente? Uma Leitura de “Calúnia” e de The Handmaid’s Tale sob a Perspectiva do Silêncio

Directory of Open Access Journals (Sweden)

Relines Rufino de Abreu

2016-07-01

Full Text Available Este artigo visa perscrutar o silêncio nas obras The Handmaid’s Tale (1985, de Margaret Atwood e “Calúnia” (1981, de Lillian Hellman, como elemento promotor de significação, principalmente no que se refere aos papéis sociais representados pelas personagens. Através das vozes sociais do discurso, observase a implantação da política do silêncio por duas vias: o silêncio local e o silêncio constitutivo. Os textos aqui analisados mostram a intersecção dessas duas formas do silêncio ao mesmo tempo em que apresentam diferentes métodos de aplicação dessa política.

Sil: a Streptococcus iniae bacteriocin with dual role as an antimicrobial and an immunomodulator that inhibits innate immune response and promotes S. iniae infection.

Directory of Open Access Journals (Sweden)

Mo-fei Li

Full Text Available Streptococcus iniae is a Gram-positive bacterium and a severe pathogen to a wide range of economically important fish species. In addition, S. iniae is also a zoonotic pathogen and can cause serious infections in humans. In this study, we identified from a pathogenic S. iniae strain a putative bacteriocin, Sil, and examined its biological activity. Sil is composed of 101 amino acid residues and shares 35.6% overall sequence identity with the lactococcin 972 of Lactococcus lactis. Immunoblot analysis showed that Sil was secreted by S. iniae into the extracellular milieu. Purified recombinant Sil (rSil exhibited a dose-dependent inhibitory effect on the growth of Bacillus subtilis but had no impact on the growths of other 16 Gram-positive bacteria and 10 Gram-negative bacteria representing 23 different bacterial species. Treatment of rSil by heating at 50°C abolished the activity of rSil. rSil bound to the surface of B. subtilis but induced no killing of the target cells. Cellular study revealed that rSil interacted with turbot (Scophthalmus maximus head kidney monocytes and inhibited the innate immune response of the cells, which led to enhanced cellular infection of S. iniae. Antibody blocking of the extracellular Sil produced by S. iniae significantly attenuated the infectivity of S. iniae. Consistent with these in vitro observations, in vivo study showed that administration of turbot with rSil prior to S. iniae infection significantly increased bacterial dissemination and colonization in fish tissues. Taken together, these results indicate that Sil is a novel virulence-associated bacteriostatic and an immunoregulator that promotes S. iniae infection by impairing the immune defense of host fish.

No limite do silêncio: a cena mínima de Samuel Beckett

Directory of Open Access Journals (Sweden)

Fernando Mesquita de Faria

2014-07-01

Full Text Available http://dx.doi.org/10.5007/2176-8552.2013n16p133 O artigo pretende demonstrar, por reconhecimento, a apropriação do silêncio na dramaturgia de Samuel Beckett. As múltiplas funções e as possibilidades de articulação dramatúrgicas tornam o silêncio tão importante quanto os sons e seu estudo passa a ser essencial para compreendermos os aspectos sonoro-musicais que envolvem a obra do autor, sobretudo por virem associadas a uma linguagem verbal. A estrutura elíptica das suas peças, a exploração sonora de palavras e frases, a escassez de cenários e objetos cênicos, somados ao silêncio, podem produzir um efeito sinestésico no leitor/espectador e são indícios que nos levam a uma reflexão, servindo como álibi para melhor decifrarmos a obra beckettiana.

Changes of serum IL-1 and sIL-2R levels after intravenous photo-coagulation in patients with varicose greater saphenous vein

International Nuclear Information System (INIS)

Han Li'na; Gu Ying; Liu Fanguang

2004-01-01

Objective: To determine the changes of serum interleukin 2 (IL-2) and soluble interleukin 2 receptor (sIL-2R) levels in patients with varicose greater saphenous vein after intravenous photocoagulation. Methods: Fifty patients with varicose greater saphenous vein were divided into two groups (mild and severe) according to their clinical symptoms. Serum IL-2 and sIL-2R levels were determined with RIA and ELISA respectively in these patients and 30 controls. Results: Serum levels of IL-2 and sIL-2R in patients of the mild group were about the same as those in the controls. In patients of the severe group, levels of IL-2 decreased and levels of sIL-2R increased significantly. After photocoagulation, the IL-2 levels dropped at first but gradually rose; the reverse was true for the sIL-2R levels. The final levels of IL-2 and sIL-2R approached those before treatment in the mild group. In the severe group, the final IL-2 levels were higher and sIL-2R levels lower than those before photocoagulation. Conclusion: Determination of serum IL-2 and sIL-2R levels revealed information about the immune status of the patients and could be applied for judgement of the treatment effect

Clinical significance of changes of serum FT3, FT4 and SIL-2R levels after treatment in patients with hyperthyroidism

International Nuclear Information System (INIS)

Ye Qing

2008-01-01

Objective: To explore the clinical significance of changes of serum FT 3 , FT 4 , SIL-2R levels after treatment in patients with hyperthyroidism. Methods: Serum FT 3 , FT 4 , TSH (with RIA) and SIL-2R (with ELISA) levels were measured in 55 patients with hyperthyroidism both before and after treatment as well as in 35 controls. Results: Before treatment, in the patients the serum FT 3 , FT 4 , SIL-2R levels were significantly higher than those in the controls (P 3 , FT 4 , SIL-2 levels were not significantly different from those in controls (P>0.05). Conclusion: Detection of serum FT 3 , FT 4 , SIL-2R levels is valuable for treatment outcome prediction in patients with hyperthyroidism. (authors)

Testing for HPV as an objective measure for quality assurance in gynecologic cytology: positive rates in equivocal and abnormal specimens and comparison with the ASCUS to SIL ratio.

Science.gov (United States)

Ko, Vincent; Nanji, Shabin; Tambouret, Rosemary H; Wilbur, David C

2007-04-25

Inappropriate use of the category of atypical squamous cells of undetermined significance (ASCUS) can result in overtreatment or undertreatment of patients, which may decrease the cost effectiveness of screening. Quality assurance tools, such as the ASCUS to squamous intraepithelial lesion ratio (ASCUS:SIL) and case review, are imperfect. High-risk HPV (hrHPV) testing is an objective test for a known viral carcinogen, and hrHPV may be more useful in monitoring the quality of ASCUS interpretations. hrHPV rates for cytologic diagnoses and patient age groups were calculated for a 2-year period. All hrHPV results for ASCUS and SIL over a 17-month period were analyzed by patient age group, over time, and by individual cytopathologist to compare hrHPV rates with the corresponding ASCUS:SIL. The hrHPV positive rate for SIL was >90%, and it was 32.6% for ASCUS. Stratification by patient age showed that approximately 50% of patients younger than 30 years and older than 70 years of age were hrHPV positive, whereas other patients had a lower rate ranging from 14% to 34%. The overall ASCUS:SIL was 1.42, and the overall hrHPV positive rate was 39.9%. Over time and by individual cytopathologist, the hrHPV rate performed similarly to the ASCUS:SIL. The analysis by patient age showed a high statistical correlation (R(2) = 0.9772) between the 2 methods. Despite differences between these techniques, the hrHPV rate closely recapitulates the ASCUS:SIL. When used together, the 2 methods can complement each other. The desirable hrHPV-positive range appears to be 40% to 50%; however, this may vary based on the patient population. The hrHPV rate is as quick and cost effective as determining the ASCUS:SIL. (c) 2007 American Cancer Society.

Clinical significance of measurement of changes of serum IL-2, SIL-2R levels after chemotherapy in patients with lung carcinoma

International Nuclear Information System (INIS)

Lu Men; Duo Huanzhi; Luo Guorong

2004-01-01

Objective: To study the changes of serum IL-2 and SIL-2R levels after chemotherapy in 36 patients with lung carcinoma. Methods: Serum IL-2 (with RIA) and SIL-2R (with ELISA) levels were measured in 36 patients with lung carcinoma both before and after chemotherapy as well as in 35 controls. Results: Before chemotherapy, in the patients the serum IL-2 levels were significantly lower and serum SIL-2R levels were significantly higher than those in the controls (P<0.01). Six months after chemotherapy, those patients without recurrence (n=20) had their IL-2 and SIL-2R levels returned to normal but in those with recurrences (n=12) the levels were about the same as before. Conclusion: Cytokines IL-2 and SIL-2R levels changes could reflect the immunostatus of the patient as well as the progress of disease and could be of prognostic value. (authors)

Clinical significance of measurement of changes of serum IL-2, SIL-2R levels after treatment in patients with thrombocytopenic purpura

International Nuclear Information System (INIS)

Feng Yue

2005-01-01

Objective: To study the changes of serum IL-2 and SIL-2R levels after treatment in 31 patients with thrombocytopenic purpura. Methods: Serum IL-2 (with RIA) and SIL-2R (with ELISA) levels were measured in 31 patients with thrombocytopenic purpura both before and after treatment as well as in 35 controls. Results: Before treatment, in the patients the serum IL-2 levels were significantly lower and serum SIL-2R levels were significantly higher than those in the controls ( P 0.05). Conclusion: Cytokines IL-2 and SIL-2R levels changes could reflect the immunostatus of the patients as well as the progress of diseases and could be of prognostic values. (authors)

Clinical significance of the changes of serum IL-2, SIL-2R and VEGF levels in pediatric patients with pulmonary tuberculosis

International Nuclear Information System (INIS)

Zeng Dongliang; Wu Chunfeng; Jiang Huanhao

2005-01-01

Objective: To explore the clinical significance of the changes of serum IL-2, soluble IL-2 receptor (SIL-2R) and vascular endothelial growth factor (VEGF) levels in pediatric patients with tuberculosis. Methods: Serum IL-2 (with RIA) and SIL-2R, VEGF (with ELISA) levels were determined in 68 pediatric patients with tuberculosis (30 active and 38 non- active) and 30 controls. Results: In the patients with active tuberculosis, the serum IL-2 levels were significantly lower and SIL-2R, VEGF levels were significantly higher than those in the controls (P<0.01). Conclusion: Determination of serum IL-2, SIL-2R and VEGF levels was useful for monitoring the activity of tuberculosis in pediatric patients. (authors)

Study on the diagnostic value of combined determination of serum CA125, CA199 and SIL-2R levels in patients with endometriosis

International Nuclear Information System (INIS)

Yang Jingxiu; Shi Shaohong; Wang Yuping; Xie Xueqin; Qin Jibao

2005-01-01

Objective: To investigate the diagnostic values of combined determination of serum CA125, CA199 and SIL-2R levels in patients with endometriosis. Methods: Serum CA125, CA199 were measured with RIA and SIL-2R levels with ELISA in 54 patients with endometriosis and 35 controls. Results: The serum levels of CA125, CA199 and SIL-2R in patients with endometriosis were significantly higher than those in controls (P<0.01). The sensitivity and speciality of CA125 for endometriosis was 70.2% and 80.4% respectively, the sensitivity and speciality of CA199 for endometriosis was 62.4% and 71.8% respectively, the sensitivity and speciality of SIL-2R was 89.5% and 60.2% respectively. The sensitivity of the combined determination of CA125, CA199 and SIL-2R for endometriosis was 86.8% being significantly higher than that of CA125 and CA199 respectively. Conclusion: Combined determination of the serum CA125, CA199 and SIL-2R levels in serum can increase the diagnostic sensitivity for endometriosis. (authors)

Clinical significance of determination of changes of serum NSE, SIL-2R and TNF levels in patients with lung cancer undergoing chemotherapy

International Nuclear Information System (INIS)

Tan Zongxian

2005-01-01

Objective: To detect the changes of serum NSE, SIL-2R and TNF levels in the 33 patients with lung cancer undergoing chemotherapy. Methods: Serum NSE, SIL-2R and TNF levels were determined with RIA and SIL-2R levels with ELISA in 33 lung cancer patients both before and after chemotherapy (n=28) as well as in 30 controls. Results: Before chemotherapy, serum NSE, SIL-2R and TNF levels in the patients were significantly higher than those in the controls (P<0.01). After chemotherapy, in 20 cases without recurrence at 6 months, the levels were much lower but still significantly higher than those in controls (P < 0.05 ). However, in the 8 patients with recurrence, the levels increased again to approaching those before chemotherapy. Conclusion: Serum levels of NSE, SIL-2R and TNF might be useful for diagnosis and predicting therapeutic effects after chemotherapy in patients with lung cancer. (authors)

Single incision laparoscopic surgery (SILS) inguinal hernia repair - recent clinical experiences of this novel technique.

Science.gov (United States)

Yussra, Y; Sutton, P A; Kosai, N R; Razman, J; Mishra, R K; Harunarashid, H; Das, S

2013-01-01

Inguinal hernia remains the most commonly encountered surgical problem. Various methods of repair have been described, and the most suitable one debated. Single port access (SPA) surgery is a rapidly evolving field, and has the advantage of affording 'scarless' surgery. Single incision laparoscopic surgery (SILS) for inguinal hernia repair is seen to be feasible in both total extraperitoneal (TEP) and transabdominal pre-peritoneal (TAPP) approaches. Data and peri-operative information on both of these however are limited. We aimed to review the clinical experience, feasibility and short term complications related to laparoscopic inguinal hernia repair via single port access. A literature search was performed using Google Scholar, Springerlink Library, Highwire Press, Surgical Endoscopy Journal, World Journal of Surgery and Medscape. The following search terms were used: laparoscopic hernia repair, TAPP, TEP, single incision laparoscopic surgery (SILS). Fourteen articles in English language related to SILS inguinal hernia repair were identified. Nine articles were related to TEP repair and the remaining 5 to TAPP. A total of 340 patients were reported within these studies: 294 patients having a TEP repair and 46 a TAPP. Only two cases of recurrence were reported. Various ports have been utilized, including the SILS port, Tri-Port and a custom- made port using conventional laparoscopic instruments. The duration of surgery was 40-100 minutes and the average length of hospital stay was one day. Early outcomes of this novel technique show it to be feasible, safe and with potentially better cosmetic outcome.

Clinical significance of determination of changes of serum IL-2, SIL-2R and TNF-α levels after treatment in patients with endometriosis

International Nuclear Information System (INIS)

Shao Xuefeng; Li Linlin; Shao Jun; Yao Hui

2008-01-01

Objective: To explore the clinical significance of changes of serum IL-2, SIL-2R and TNF-α levels after treatment in patients with endometriosis. Methods: Serum IL-2 and TNF-α (with RIA) and SIL-2R (with ELISA) levels were determined in 42 patients with endometriosis both before and after treatment as well as in 35 controls. Results: Before treatment, the serum SIL-2R and TNF-α levels in patients were significantly higher than those in the controls (P 0.05). Conclusion: Development of endometriosis were closely related to the serum levels of IL-2, SIL-2R and TNF-α. (authors)

Evaluation of CP sil 8 film thickness for the capillary GC analysis of methyl mercury

DEFF Research Database (Denmark)

Petersen, Jens Højslev; Drabæk, Iver

1992-01-01

Different commercially available CP-Sil 8 CB capillary columns have been tested with a mixed standard containing methyl mercury chloride, ethyl mercury chloride and a stable nonpolar chlorinated hydrocarbon. The aim of the study was to see whether the columns tested could be used without special...... available insert for on-column injections on wide bore columns, and a 5.35 mum thick stationary phase. It was concluded that this CP Sil 8 CB column gave good results although minor interactions between the organo-mercury compounds and the column could be seen....

Clinical significance of measurements of changes of serum IL-2, SIL-2R, TNF-α levels after chemotherapy in patients with ovary cancer

International Nuclear Information System (INIS)

Ma Zhongwei

2005-01-01

Objective: To study the changes of serum IL-2, SIL-2R and TNF-α levels after chemotherapy in 34 patients with ovary cancer. Methods: Serum IL-2, TNF-α (with RIA) and SIL-2R (with ELISA) levels were measured in 34 patients with ovary cancers both before and 6 months after chemotherapy as well as in 30 controls. Results: Before chemotherapy in the patients the serum IL-2 levels were significantly lower and serum SIL-2R and TNF-α levels were significantly higher than those in the controls (P<0.01). Six months after chemotherapy, those patients without recurrence (n=21) had their IL-2, SIL-2R and TNF-α levels returned to normal, but in those with recurrences (n=10) the levels were about the same as before. Conclusion: Serum IL-2, SIL-2R and TNF-α levels changes could reflect the immunostatus of the patients as well as the progress of diseases and could be of prognostic value. (authors)

Elevated Plasma Levels of sIL-2R in Complex Regional Pain Syndrome: A Pathogenic Role for T-Lymphocytes?

Directory of Open Access Journals (Sweden)

Krishna D. Bharwani

2017-01-01

Full Text Available The immune system has long been thought to be involved in the pathophysiology of complex regional pain syndrome (CRPS. However, not much is known about the role of the immune system and specifically T-cells in the onset and maintenance of this disease. In this study, we aimed to evaluate T-cell activity in CRPS by comparing blood soluble interleukin-2 receptor (sIL-2R levels between CRPS patients and healthy controls. CRPS patients had statistically significant elevated levels of sIL-2R as compared to healthy controls (median sIL-2R levels: 4151 pg/ml (Q3 − Q1 = 5731 pg/ml − 3546 pg/ml versus 1907 pg/ml (Q3 − Q1: 2206 pg/ml − 1374 pg/ml, p<0.001, resp.. Furthermore, sIL-2R level seems to be a good discriminator between CRPS patients and healthy controls with a high sensitivity (90% and specificity (89.5%. Our finding indicates increased T-cell activity in patients with CRPS. This finding is of considerable relevance as it could point towards a T-cell-mediated inflammatory process in this disease. This could pave the way for new anti-inflammatory therapies in the treatment of CRPS. Furthermore, sIL-2R could be a promising new marker for determining inflammatory disease activity in CRPS.

Clinical significance of measurements of changes of serum IL-2, SIL-2R and TNF-α levels after treatment in patients with rheumatoid arthritis

International Nuclear Information System (INIS)

Yu Songsan

2007-01-01

Objective: To study the changes of serum IL-2, SIL-2R and TNF-α levels after treatment in 39 patients with rheumatoid arthritis. Methods: Serum IL-2, TNF-α (with RIA) and SIL-2R (with ELISA) levels were measured in 39 patients with rheumatoid arthritis. Both before and one year after treatment as well as in 35 controls. Results: Before treatment in the patients the serum IL-2 levels were significantly lower and serum SIL-2R and TNF-α levels, were significantly higher than those in the controls (P<0.01), one year after treatment, the patients without recurrence (n=31) had their serum IL-2, SIL-2R and TNF-α levels returned to normal, but in patients with recurrences (n=8) the levels were about the same as those before treatment. Conclusion: Serum IL-2, SIL-2R and TNF-α lends were closely related to the diseases process and could be of prognostic value. (authors)

The clinical significance of T-cells, sIL-2R and TNF in evaluating patients with splenic autotransplantation

International Nuclear Information System (INIS)

Wang Haowei; Wu Haorong; Li Juncheng; Wu Jingchang

2002-01-01

To study the immunological effects of splenic autotransplantation, forty patients with splenic trauma were divided into two groups equally. One group underwent splenic autotransplantation and another underwent splenectomy. Control group included ten cases. Splenic autotransplantation and splenectomy group were compared with the control group. In the group of splenic autotransplantation, CD3 + , CD4 + , CD8 + , CD4 + /CD8 + dropped and sIL-2R, TNF rose after a week of operation. Then CD3 + , CD4 + , CD8 + , CD4 + /CD8 + rose and sIL-2R, TNF dropped three months later. In the group of splenectomy, CD 3+ , CD4 + , CD8 + and CD4 + /CD8 + dropped persistently, while sIL-2R and TNF rose postoperatively. Result showed splenic autotransplantation can help body to maintain T-cells level and improve the anti-infective ability

Interdito e silêncio: uma abordagem no quadrado das oposições

Directory of Open Access Journals (Sweden)

Fabio Elias Verdiani Tfouni

2010-03-01

Full Text Available O presente trabalho, situado no campo da análise do discurso de Pêcheux, numainterface com a psicanálise, trata o interdito e o silêncio como constitutivos efundadores do discurso. Resumidamente, afirmamos que para que seja possívelque se diga algo é preciso que não se diga tudo. Fazemos uma abordagemdessas questões com base nas modalidades aléticas da lógica aristotélica. Paratal tarefa, tratamos a questão do dizer a partir do quadrado lógico aristotélico.Propusemos e construímos um quadrado do dito e da enunciação.

Multidrug-Resistant CTX-M-(15, 9, 2)- and KPC-2-Producing Enterobacter hormaechei and Enterobacter asburiae Isolates Possessed a Set of Acquired Heavy Metal Tolerance Genes Including a Chromosomal sil Operon (for Acquired Silver Resistance).

Science.gov (United States)

Andrade, Leonardo N; Siqueira, Thiago E S; Martinez, Roberto; Darini, Ana Lucia C

2018-01-01

Bacterial resistance to antibiotics is concern in healthcare-associated infections. On the other hand, bacterial tolerance to other antimicrobials, like heavy metals, has been neglected and underestimated in hospital pathogens. Silver has long been used as an antimicrobial agent and it seems to be an important indicator of heavy metal tolerance. To explore this perspective, we searched for the presence of acquired silver resistance genes ( sil operon: silE, silS, silR, silC, silF, silB, silA , and silP ) and acquired extended-spectrum cephalosporin and carbapenem resistance genes ( bla CTX-M and bla KPC ) in Enterobacter cloacae Complex (EcC) ( n = 27) and Enterobacter aerogenes ( n = 8) isolated from inpatients at a general hospital. Moreover, the genetic background of the silA (silver-efflux pump) and the presence of other acquired heavy metal tolerance genes, pcoD (copper-efflux pump), arsB (arsenite-efflux pump), terF (tellurite resistance protein), and merA (mercuric reductase) were also investigated. Outstandingly, 21/27 (78%) EcC isolates harbored silA gene located in the chromosome. Complete sil operon was found in 19/21 silA -positive EcC isolates. Interestingly, 8/20 (40%) E. hormaechei and 5/6 (83%) E. asburiae co-harbored silA/pcoD genes and bla CTX-M-(15,2,or9) and/or bla KPC-2 genes. Frequent occurrences of arsB, terF , and merA genes were detected, especially in silA/pcoD -positive, multidrug-resistant (MDR) and/or CTX-M-producing isolates. Our study showed co-presence of antibiotic and heavy metal tolerance genes in MDR EcC isolates. In our viewpoint, there are few studies regarding to bacterial heavy metal tolerance and we call attention for more investigations and discussion about this issue in different hospital pathogens.

Multidrug-Resistant CTX-M-(15, 9, 2- and KPC-2-Producing Enterobacter hormaechei and Enterobacter asburiae Isolates Possessed a Set of Acquired Heavy Metal Tolerance Genes Including a Chromosomal sil Operon (for Acquired Silver Resistance

Directory of Open Access Journals (Sweden)

Leonardo N. Andrade

2018-03-01

Full Text Available Bacterial resistance to antibiotics is concern in healthcare-associated infections. On the other hand, bacterial tolerance to other antimicrobials, like heavy metals, has been neglected and underestimated in hospital pathogens. Silver has long been used as an antimicrobial agent and it seems to be an important indicator of heavy metal tolerance. To explore this perspective, we searched for the presence of acquired silver resistance genes (sil operon: silE, silS, silR, silC, silF, silB, silA, and silP and acquired extended-spectrum cephalosporin and carbapenem resistance genes (blaCTX−M and blaKPC in Enterobacter cloacae Complex (EcC (n = 27 and Enterobacter aerogenes (n = 8 isolated from inpatients at a general hospital. Moreover, the genetic background of the silA (silver-efflux pump and the presence of other acquired heavy metal tolerance genes, pcoD (copper-efflux pump, arsB (arsenite-efflux pump, terF (tellurite resistance protein, and merA (mercuric reductase were also investigated. Outstandingly, 21/27 (78% EcC isolates harbored silA gene located in the chromosome. Complete sil operon was found in 19/21 silA-positive EcC isolates. Interestingly, 8/20 (40% E. hormaechei and 5/6 (83% E. asburiae co-harbored silA/pcoD genes and blaCTX−M−(15,2,or9 and/or blaKPC−2 genes. Frequent occurrences of arsB, terF, and merA genes were detected, especially in silA/pcoD-positive, multidrug-resistant (MDR and/or CTX-M-producing isolates. Our study showed co-presence of antibiotic and heavy metal tolerance genes in MDR EcC isolates. In our viewpoint, there are few studies regarding to bacterial heavy metal tolerance and we call attention for more investigations and discussion about this issue in different hospital pathogens.

Three dimensional nilpotent singularity and Sil'nikov bifurcation

International Nuclear Information System (INIS)

Li Xindan; Liu Haifei

2007-01-01

In this paper, by using the normal form, blow-up theory and the technique of global bifurcations, we study the singularity at the origin with threefold zero eigenvalue for nonsymmetric vector fields with nilpotent linear part and 4-jet C ∼ -equivalent toy-bar -bar x+z-bar -bar y+ax 3 y-bar -bar z,with a 0, and analytically prove the existence of Sil'nikov bifurcation, and then of the strange attractor for certain subfamilies of the nonsymmetric versal unfoldings of this singularity under some conditions

Near-Field Phase-Change Optical Recording of 1.36 Numerical Aperture

Science.gov (United States)

Ichimura, Isao; Kishima, Koichiro; Osato, Kiyoshi; Yamamoto, Kenji; Kuroda, Yuji; Saito, Kimihiro

2000-02-01

A bit density of 125 nm was demonstrated through near-field phase-change (PC) optical recording at the wavelength of 657 nm by using a supersphere solid immersion lens (SIL). The lens unit consists of a standard objective and a φ2.5 mm SIL@. Since this lens size still prevents the unit from being mounted on an air-bearing slider, we developed a one-axis positioning actuator and an active capacitance servo for precise gap control to thoroughly investigate near-field recording. An electrode was fabricated on the bottom of the SIL, and a capacitor was formed facing a disk material. This setup realized a stable air gap below 50 nm, and a new method of simulating modulation transfer function (MTF) optimized the PC disk structure at this gap height. Obtained jitter of 8.8% and a clear eye-pattern prove that our system successfully attained the designed numerical-aperture (\\mathit{NA}) of 1.36.

VPLIV VAN DER WAALSOVIH SIL NA TVORBO ASOCIIRANIH MOLEKUL

OpenAIRE

Kuster, Bernarda

2014-01-01

Namen diplomske naloge je preučiti vpliv van der Waalsovih sil na tvorbo asociiranih molekul. V ta namen smo izbrali površinsko aktivne snovi, ki imajo amfifilne lastnosti in vplivajo na povšinske in medfazne napetosti ter pri določeni koncentraciji, imenovani kritična micelna koncentracija (CMC), tvorijo molekulske skupke, ki jim pravimo micele. Kritično micelno koncentracijo smo določili trem površinsko aktivnim snovem: heksadeciltrimetilamonijevemu bromidu, tetradeciltrimetilamonijevemu b...

SILWeb – analisador fonológico silábico-acentual de texto escrito

Directory of Open Access Journals (Sweden)

Ana Cristina Fricke Matte

2012-11-01

Full Text Available Este artigo apresenta o programa SilWeb – um programa analisador de texto escrito cuja finalidade é obter informações lexicais sobre acento e tipo de unidade fonológica –, e discute o processo de sua elaboração, cuja peculiaridade foi ser o resultado de uma interação entre lingüistas e engenheiros. Em função dessa interação, o processo contou com um estudo mattosiano da estrutura da transcrição fonológica adotada, bem como contou com o algoritmo do programa. Ambos os estudos estão relatados no presente artigo. Além da separação silábica tradicional, o programa possui uma versão para separação de unidades vogal avogal.

Case-mix study of single incision laparoscopic surgery (SILS) vs. Conventional laparoscopic surgery in colonic cancer resections

DEFF Research Database (Denmark)

Mynster, Tommie; Wille-Jørgensen, Peer

2013-01-01

of administrations or amount of opioids were seen. Conclusion. With reservation of a small study group we find SILS is like worthy to CLS in colorectal cancer surgery and a benefit in postoperative recovery and pain is possible, but has to be investigated in larger randomised studies.......Single incision laparoscopic surgery (SILS) may be even less invasive to a patient than conventional laparoscopic surgery (CLS). Aim of the study of the applicability of the procedure, the first 1½ year of experiences and comparison with CLS for colonic cancer resections Material and methods. Since...

Soluble interleukin 6 receptor (sIL-6R) mediates colonic tumor cell adherence to the vascular endothelium: a mechanism for metastatic initiation?

LENUS (Irish Health Repository)

Dowdall, J F

2012-02-03

The mechanisms by which surgery increases metastatic proliferation remain poorly characterized, although endotoxin and immunocytes play a role. Recent evidence suggests that endothelial adherence of tumor cells may be important in the formation of metastases. Soluble receptors of interleukin-6 (sIL-6R) shed by activated neutrophils exert IL-6 effects on endothelial cells, which are unresponsive under normal circumstances. This study examined the hypothesis that sIL-6R released by surgical stress increases tumor cell adherence to the endothelium. Neutrophils (PMN) were stimulated with lipopolysaccharide, C-reactive protein (CRP), and tumor necrosis factor-alpha. Soluble IL-6R release was measured by enzyme-linked immunosorbent assay. Colonic tumor cells transfected with green fluorescent protein and endothelial cells were exposed to sIL-6R, and tumor cell adherence and transmigration were measured by fluorescence microscopy. Basal release of sIL-6R from PMN was 44.7 +\\/- 8.2 pg\\/ml at 60 min. This was significantly increased by endotoxin and CRP (131 +\\/- 16.8 and 84.1 +\\/- 5.3, respectively; both P < 0.05). However, tumor necrosis factor-alpha did not significantly alter sIL-6R release. Endothelial and tumor cell exposure to sIL-6R increased tumor cell adherence by 71.3% within 2 h but did not significantly increase transmigration, even at 6 h. Mediators of surgical stress induce neutrophil release of a soluble receptor for IL-6 that enhances colon cancer cell endothelial adherence. Since adherence to the endothelium is now considered to be a key event in metastatic genesis, these findings have important implications for colon cancer treatment strategies.

Ácidos silícicos como catalizadores y fuente de silicio/metal para zeolitas

OpenAIRE

Barea Berzosa, Eva María

2011-01-01

Barea Berzosa, EM. (2005). Ácidos silícicos como catalizadores y fuente de silicio/metal para zeolitas [Tesis doctoral no publicada]. Universitat Politècnica de València. doi:10.4995/Thesis/10251/1868.

Clinical significance of determination of changes of serum IL-2, sIL-2R and TGF-β levels in patients with Graves' ophthalmopathy

International Nuclear Information System (INIS)

Li Han

2009-01-01

Objective: To study the relationship between progress of the disease and the changes of serum IL-2, sIL-2R and TGF-β levels in patients with Graves' ophthalmopathy. Methods: Serum TGF-β(with RIA) and IL-2, sIL-2R(with ELISA) levels were determined in 30 patients with Graves' ophthalmopathy both before and after six months' treatment with prednisonlone as well as in 30 controls. Results: The serum IL-2 levels in the patients before treatment were significantly lower than those in controls (P 0.05). Both serum sIL-2R and TGF-β levels in the patients before treatment were significantly higher than those in controls (P<0.01). After treatment, the levels dropped markedly, but still remained significantly higher than those in controls (P<0.05 and P<0.01). Conclusion: Determination of changes of serum IL-2, sIL-2R and TGF-β levels in patients with Graves' ophthalmopathy might be helpful for outcome prediction. (authors)

Caracterización y significado de las rocas silíceas y ferruginosas del Paleoceno de Zamora

OpenAIRE

Bustillo, Mª Ángeles; Martín Serrano, Ángel

1980-01-01

Se estudian las rocas silíceas y ferruginosas del Paleógeno de la provincia de Zamora dentro del contexto general de la sedimentación fluvial. El análisis detallado de las muestras es realizado por técnicas petrográficas en lámina delgada y probeta pulida, determinando además su composición mineralógica por difracción de Rayos X. Los minerales silíceos detectados son ópalo C y ópalo C-T mientras que como minerales de hierro aparecen hidróxidos amorfos, hematites y goetita. Las conclusiones...

Elevated Plasma Levels of sIL-2R in Complex Regional Pain Syndrome: A Pathogenic Role for T-Lymphocytes?

Science.gov (United States)

Stronks, Dirk L.; Dik, Willem A.; Schreurs, Marco W. J.

2017-01-01

The immune system has long been thought to be involved in the pathophysiology of complex regional pain syndrome (CRPS). However, not much is known about the role of the immune system and specifically T-cells in the onset and maintenance of this disease. In this study, we aimed to evaluate T-cell activity in CRPS by comparing blood soluble interleukin-2 receptor (sIL-2R) levels between CRPS patients and healthy controls. CRPS patients had statistically significant elevated levels of sIL-2R as compared to healthy controls (median sIL-2R levels: 4151 pg/ml (Q3 − Q1 = 5731 pg/ml − 3546 pg/ml) versus 1907 pg/ml (Q3 − Q1: 2206 pg/ml − 1374 pg/ml), p CRPS patients and healthy controls with a high sensitivity (90%) and specificity (89.5%). Our finding indicates increased T-cell activity in patients with CRPS. This finding is of considerable relevance as it could point towards a T-cell-mediated inflammatory process in this disease. This could pave the way for new anti-inflammatory therapies in the treatment of CRPS. Furthermore, sIL-2R could be a promising new marker for determining inflammatory disease activity in CRPS. PMID:28634419

A Profilaxia do Silêncio: Nietzsche e a Virtude da Vita Contemplativa

Directory of Open Access Journals (Sweden)

Jelson Roberto Oliveira

2011-12-01

Full Text Available http://dx.doi.org/10.5007/1677-2954.2011v10n1p133 Pretende-se mostrar como o tema do silêncio, apresentado como parte do projeto nietzscheano de revitalização da vita contemplativa, adquire importância no chamado segundo período de sua produção, ligado àquela que poderia ser considerada a primeira e mais contundente das virtudes humanas apontadas por Nietzsche: o cultivo de si. Nesse sentido, trata-se de uma noção requisitada como parte do projeto crítico da modernidade implementado pelo filósofo alemão, cujo ponto de partida é uma revisão da própria tarefa da filosofia, conduzindo a uma crítica radical da moralidade vigente, da hipertrofia da racionalidade e da importância da linguagem. O silêncio, associado à solidão, aparece como uma profilaxia e radical aprofundamento em relação à anulação de si no arrulho da multidão moderna.

Study on the changes of serum soluble IL-2 receptor (SIL-2R) levels and distribution pattern of peripheral blood T-cell subsets after treatment in pediatric patients with Bronchopneumonia

International Nuclear Information System (INIS)

Chen Chuanbin

2005-01-01

Objective:To investigate the significance of changes of serum SIL-2R levels and T-cell subsets distribution type after treatment in pediatric patients with bronchopneumonia. Methods: Serum SIL-2R levels (with ELISA) and peripheral blood T-cell subset distribution pattern (with monoclonal antibody technique) were determined in 33 pediatric patients with broncho-pneumonia and 30 controls. Results: Before treatment, the serum SIL-2R levels in the patients were significantly higher than those in normal controls (P 0.05). Serum SIL-2R levels were positively correlated with CD4/CD8 ratio. Conclusion: Detection of serum SIL-2R levels and CD4/CD8 ratio is clinically useful in the management of pediatric patients with bronchopneumonia. (authors)

Design and simulation of high resolution optical imaging system based on near-field using solid immersion lens with NA = 2.2

Science.gov (United States)

Abbasian, Karim; Sadeghi, Rasool; Sadeghi, Parvin

2014-03-01

In this work, by changing annular aperture zones transmittance, we could get a spot size smaller than any reported one by utilizing annular aperture. Where, by dividing the annular aperture to more than three zones and utilizing of Sony corporation Produced SIL that has NA higher than 2, we could improve imaging resolution for radial polarization (RP); also we could decrease the FWHM from around ? to near ?. Here, the FWHM variation, according to the refractive index changing, has decreased to zero for RP. After that, circular polarization (CP) has been introduced to get a spot size less than ?. This image resolution improving can be applied to enhance optical data storage, microscopes and lithographic and other high accurate optical systems.

Innovations in Endosurgery-Journey into the Past of the Future: To Ride the SILS Bandwagon or Not?

Science.gov (United States)

Agarwal, Brij B; Chintamani; Ali, Kamran; Goyal, Karan; Mahajan, Krishan C

2012-06-01

Progress in surgical practice has paralleled the civilizational evolution. Surgery has progressed from being the last resort in saving life to being form and function preserver. Post-renaissance Industrial age gave an impetus to this march of surgery. The currently on going digital technological revolution has further catalysed this march. Having achieved the stabilized and acceptable clinical outcomes, the surgeon has embarked on a journey of improving patient reported outcomes (PRO). Improvement in PROs with the advent of laparoscopic surgery with the attendant emphasis on minimising invasion has led to debates about invasion being just parietal or holistic in physiological sense. There is a concern that parietal invasiveness shouldn't be a trade-off for compromised clinical outcomes. Single Incision Laparoscopic Surgery (SILS) in its current avatar with current instrumentation seems to be an enthusiastic bandwagon rolling on with the cosmetic benefits acting as veil to hide the potential clinical concerns. History of surgical innovations is riddled with tales of vindictiveness and vicissitude. Lest the same fate befalls SILS we would do better to examine the SILS bandwagon in its current form till the emerging technologies address the current concerns.

HASILT: An intelligent software platform for HAZOP, LOPA, SRS and SIL verification

International Nuclear Information System (INIS)

Cui, Lin; Shu, Yidan; Wang, Zhaohui; Zhao, Jinsong; Qiu, Tong; Sun, Wenyong; Wei, Zhenqiang

2012-01-01

Incomplete process hazard analysis (PHA) and poor knowledge management have been two major reasons that have caused numerous lamentable disasters in the chemical process industry (CPI). To improve PHA quality, a new integration framework that combines HAZOP, layer of protection analysis (LOPA), safety requirements specification (SRS) and safety integrity level (SIL) validation is proposed in this paper. To facilitate the integrated work flow and improve the relevant knowledge management, an intelligent software platform named HASILT has been developed by our research team. Its key components and functions are described in this paper. Furthermore, since the platform keeps all history data in a central case base and case-based reasoning is used to automatically retrieve similar old cases for helping resolve new problems, a recall opportunity is created to reduce information loss which has been cited many times as a common root cause in investigations of accidents.

Soil reaction and absorption of silicon by rice Reação do solo e absorção de silício pelo arroz

Directory of Open Access Journals (Sweden)

Mônica Sartori de Camargo

2007-01-01

Full Text Available The solubility and availability of silicon can be influenced by soil reaction. A pot experiment with a clayey textured Rhodic Acrustox was conducted under greenhouse conditions to evaluate the effect of soil reaction on silicon availability to rice plants. The experiment was set up in a completely randomized design, using a factorial scheme (4 x 4 with four materials (calcitic lime, calcium and magnesium silicate, pure silicic acid, and wollastonite, four rates (0, 2500, 5000 and 7500 mg per 5 kg-pot and four replicates. After 60 days, dry matter yield and silicon absorption by the rice shoot plants, pH CaCl2, and soluble silicon (0.5 mol L-1 acetic acid and 0.01 mol L-1CaCl2 in the soil were evaluated. The materials increased soil pH as the applied rates increased, except silicic acid. Soluble silicon extracted by 0.5 mol L-1 acetic acid also increased with applied rates. For calcium chloride, soluble silicon increased in the soil only with wollastonite and calcium and magnesium silicate, agreeing with its total content. Silicon absorption by the above-ground part of the rice plants was linearly correlated with rates of wollastonite, followed by calcium and magnesium silicate, silicic acid and calcitic lime. Soil pH increase with lime was not sufficient to provide silicon to the rice. The 0.01 mol L-1 CaCl2 soluble silicon had the best correlation with silicon absorption by plants. More studies are necessary under field conditions and other soils to corroborate the presented results.A solubilidade e disponibilidade de silício podem ser influenciadas pela reação do solo. Com o objetivo de estudar o efeito da reação do solo sobre a disponibilidade de silício para a cultura do arroz, foi conduzido experimento em Latossolo Vermelho álico textura argilosa em casa-de-vegetação. O experimento foi conduzido em fatorial 4 x 4, delineamento em blocos inteiramente casualizados e quatro repetições. Quatro materiais (calcário, silicato de c

Les facteurs territoriaux de la compétitivité de la filière soja au Brésil

Directory of Open Access Journals (Sweden)

Bertrand Jean-Pierre

2001-05-01

Full Text Available Ce papier discute les facteurs de progression du complexe soja dans les régions de Cerrados du Nord du Brésil, proches de la forêt amazonienne. Le Mato Grosso est déjà le premier État producteur de soja du Brésil, tandis que le Para entre dans le processus de production intensif. Les deux États obtiennent des rendements élevés ; mais ils risquent de connaître des problèmes environnementaux du fait d’un usage excessif des pesticides.

Clinical significance of determination of changes of serum IL-2, SIL-2R, TNF-α contents and T-cell subgroup distribution type in patients with psoriasis

International Nuclear Information System (INIS)

Mou Xudong

2005-01-01

Objective: To investigate the changes of serum IL-2, SIL-2R, TNF-α contents and T-cell subgroup distribution type in patients with psoriasis. Methods: Serum IL-2 and TNF-α levels were measured with RIA, SIL-2R levels was measured with ELISA and T-cell subgroup distribution type was detected with monoclonal antibody in 40 patients with psoriasis and 35 controls. Results: The serum IL-2 levels and CD 4 /CD 8 values were significantly lower in the patients than those in controls (P<0.01), while the serum SIL-2R, TNF-α levels were significantly higher (P<0.01). Conclusion: Determination of serum IL-2, SIL-2R, TNF-α contents and T-cell subgroup distribution type is clinically useful for understanding the disturbances of immuno-modulation in these patients. (authors)

ÉTUDE DE CAS — Governador Valdares, Brésil : Le jardinage s ...

International Development Research Centre (IDRC) Digital Library (Canada)

16 déc. 2010 ... À Governador Valadares, au Brésil, un programme municipal d'agriculture urbaine contribue à garnir la table des citadins des quartiers à faible revenu. Les protagonistes vont et viennent, mais les jardiniers tiennent bon, grâce à l'appui bien coordonné de nombreux acteurs locaux.

Solid immersion lenses for enhancing the optical resolution of thermal and electroluminescence mapping of GaN-on-SiC transistors

International Nuclear Information System (INIS)

Pomeroy, J. W.; Kuball, M.

2015-01-01

Solid immersion lenses (SILs) are shown to greatly enhance optical spatial resolution when measuring AlGaN/GaN High Electron Mobility Transistors (HEMTs), taking advantage of the high refractive index of the SiC substrates commonly used for these devices. Solid immersion lenses can be applied to techniques such as electroluminescence emission microscopy and Raman thermography, aiding the development device physics models. Focused ion beam milling is used to fabricate solid immersion lenses in SiC substrates with a numerical aperture of 1.3. A lateral spatial resolution of 300 nm is demonstrated at an emission wavelength of 700 nm, and an axial spatial resolution of 1.7 ± 0.3 μm at a laser wavelength of 532 nm is demonstrated; this is an improvement of 2.5× and 5×, respectively, when compared with a conventional 0.5 numerical aperture objective lens without a SIL. These results highlight the benefit of applying the solid immersion lenses technique to the optical characterization of GaN HEMTs. Further improvements may be gained through aberration compensation and increasing the SIL numerical aperture

Le Brésil et sa généreuse diplomatie : un dragon amical ou un tigre de papier ?

Directory of Open Access Journals (Sweden)

Robert Muggah

2012-04-01

Full Text Available Jouissant d’une démocratie stable et d’une croissance économique vertigineuse, le Brésil est en passe de devenir une puissance mondiale. Le pays s’attelle aujourd’hui à renforcer ses relations multilatérales et bilatérales en vue de promouvoir le commerce et de réduire sa vulnérabilité à l’étranger et au niveau national. Cet article montre comment le Brésil a progressivement aligné sa politique étrangère sur la coopération Sud-Sud (CSS dans le but d’atteindre ces objectifs parallèles. Si les priorités politiques du Brésil en matière de commerce ont retenu l’attention, il en est tout autrement de ses politiques et de ses pratiques en matière d’aide au développement. En outre, il est surprenant de constater que le lien explicite entre ces deux piliers de la politique étrangère brésilienne que sont le commerce et l’aide ne suscite guère de débat. Le présent article cherche à démontrer que le nouveau programme d’aide du Brésil repose fondamentalement sur des considérations commerciales. Au cours des dix dernières années, le Brésil s’est en effet attaché à positionner son programme de politique étrangère de manière à remodeler les termes mondiaux de l’échange en sa faveur et à diminuer sa dépendance aux niveaux international et national. Les attributions relativement modestes de l’aide au développement du Brésil augmentent avec l’effort plus général de faire progresser le commerce, l’investissement étranger direct et le transfert technologique. En cherchant de nouveaux marchés pour ses produits, services et investissements, le Brésil escompte que sa position en faveur de la coopération pour le développement Sud-Sud (CDSS l’aidera à renforcer son influence dans les organisations bilatérales et multilatérales, y compris au sein de l’Organisation mondiale du commerce (OMC et du Conseil de sécurité de l’ONU.

HybridSil Icephobic Nanocomposites for Next Generation Aircraft In-Flight Icing Measurement and Mitigation, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The purpose of this SBIR program is to adapt NanoSonic's HybridSil® nanocomposites and combine high erosion resistance, low ice adhesion, and passive anti-icing...

[Genotyping of oncogenic human papilloma viruses in women with HG SIL diagnosis].

Science.gov (United States)

Kedzia, Witold; Pruski, Dominik; Józefiak, Agata; Rokita, Wojciech; Spaczyński, Marek

2010-10-01

Development of primary prevention of cervical cancer in other words a vaccination against selected, oncogenic HPV types, entails an increasing importance of epidemiological studies and prevalence of various types of human papilloma virus. The incidence of HPV varies depending on the geographic location of the population. The effectiveness of primary prevention against HPV 16, 18, in the context of reducing the incidence of cervical cancer will depend, among others, on the prevalence of these types in the population and virus-like antigens, which are partially cross-resistant. Identification of the most frequent, oncogenic HPV types in women with HG SIL diagnosis from Central and Western Poland to assess the merits of the development of primary prevention. For the purpose of molecular tests identifying the presence of 13 DNA oncogenic virus types, swabs were taken with the cyto-brush from 76 women diagnosed with CIN 2 or CIN 3 (HG SIL). Patients eligible for the study were diagnosed at the Laboratory of Pathophysiology of Uterine Cervix, Gynecology and Obstetrics Clinical Hospital of Karol Marcinkowski University of Medical Sciences. Patients came from Central and Western parts of Poland. Cell material in which the method of Amplicor HPV (Roche Diagnostics) identified the presence of DNA of oncogenic HPV types was in each case subsequently subjected to genotyping using the molecular test - Linear Array HPV Genotyping (Roche Diagnostics). Five most common oncogenic HPV types in order of detection included: 16, 33, 18, 31, 56. Together these five types of virus comprised 75.86% (88/116) of all detected HPV types. 1. In women from Central and Western Poland, diagnosed with HG SIL, the most common HPV genotypes were HPV 16, HPV33, HPV 18, HPV31, HPV56. 2. Two HPV types 16 and 18, against which vaccinations are directed, belong to the group of three genotypes of HPV most commonly identified in the evolution of CIN 2, CIN 3 diagnosed in women from Central and Western

Shakespeare dans le Brésil du 19e siècle : un exemple de transfert culturel

OpenAIRE

Segurado, Livia

2015-01-01

Partant de l’Angleterre vers l’Europe continentale au 18ème siècle, les pièces de Shakespeare arrivent au Brésil au 19ème siècle via des modèles français. Ce transfert culturel se fait d’abord par la perception de la culture étrangère imposée au Brésil lors de sa colonisation, suivie d’une graduelle interaction avec elle, puis d’une réinvention adaptée à la couleur locale. L’acteur João Caetano débute en 1835 une approche plus nationaliste, mais c’est la littérature qui voit surgir un authent...

Clinical audit on documentation of anticipatory "Not for Resuscitation" orders in a tertiary australian teaching hospital

Directory of Open Access Journals (Sweden)

Naveen Sulakshan Salins

2011-01-01

Full Text Available Aim: The purpose of this clinical audit was to determine how accurately documentation of anticipatory Not for Resuscitation (NFR orders takes place in a major metropolitan teaching hospital of Australia. Materials and Methods: Retrospective hospital-based study. Independent case reviewers using a questionnaire designed to study NFR documentation reviewed documentation of NFR in 88 case records. Results: Prognosis was documented in only 40% of cases and palliative care was offered to two-third of patients with documented NFR. There was no documentation of the cardiopulmonary resuscitation (CPR process or outcomes of CPR in most of the cases. Only in less than 50% of cases studied there was documented evidence to suggest that the reason for NFR documentation was consistent with patient′s choices. Conclusion: Good discussion, unambiguous documentation and clinical supervision of NFR order ensure dignified and quality care to the dying.

Soluble intercellular adhesion molecule-1 (sICAM-1) and soluble interleukin-2 receptors (sIL-2R) in scleroderma skin

DEFF Research Database (Denmark)

Søndergaard, Klaus; Deleuran, Mette; Heickendorff, Lene

1998-01-01

In order to investigate whether soluble intercellular adhesion molecule-1 (sICAM-1) and soluble interleukin-2 receptors (sIL-2R) were present in scleroderma skin, and to compare their levels to concentrations measured in plasma and clinical parameters, we examined suction blister fluid and plasma...... from 13 patients with systemic sclerosis and 11 healthy volunteers. Suction blisters and biopsies were from the transition zone between normal skin and scleroderma, and uninvolved abdominal skin. The levels of sICAM-1 and sIL-2R were significantly increased in both plasma and suction blister fluid from...

O caminho do silêncio: Mallarmé e Blanchot = The way of silence: Mallarmé and Blanchot

Directory of Open Access Journals (Sweden)

Stroparo, Sandra M.

2013-01-01

Full Text Available A mudança de paradigma representada pela poesia moderna implica uma série de particularidades dentre as quais o silêncio e suas possibilidades elocutórias se afirmam em embate e fertilidade. Contando com a leitura da obra de Mallarmé, e particularmente de alguns ensaios e do poema “Um lance de dados”, o texto busca apresentar o trajeto pelo qual a descoberta do que Mallarmé chamou de Nada, destruição e silêncio, pôde gerar para a crítica moderna, e especialmente para o crítico e autor Maurice Blanchot, uma vertente de compreensão da nova poesia bem como de suas próprias possibilidades de análise e compreensão

Feasibility of Optical Instruments Based on Multiaperture Optics.

Science.gov (United States)

1984-10-16

system may be configured. The optical elements may be nonimaging concentrators (light horns), the field of view (FOV) of which may be controlled by a...RD-RI58 868 FEASIBILITY OF OPTICAL INSTRUMENTS BASED ON i/I MULTIAPERTURE OPTICS (U) FLORIDA UNIV GAINESVILLE DEPT OF NUCLEAR ENGINEERING SCIENCES J D...d Subtitle) 5. TYPE OF REPORT & PERIOD COVERED ’ 0 Feasibility of Optical Instruments Based on Final Report * CD Multiaperature Optics 615/83 to 9/30

Near-field microscopy with a microfabricated solid immersion lens

Science.gov (United States)

Fletcher, Daniel Alden

2001-07-01

Diffraction of focused light prevents optical microscopes from resolving features in air smaller than half the wavelength, λ Spatial resolution can be improved by passing light through a sub-wavelength metal aperture scanned close to a sample, but aperture-based probes suffer from low optical throughput, typically below 10-4. An alternate and more efficient technique is solid immersion microscopy in which light is focused through a high refractive index Solid Immersion Lens (SIL). This work describes the fabrication, modeling, and use of a microfabricated SIL to obtain spatial resolution better than the diffraction limit in air with high optical throughput for infrared applications. SILs on the order of 10 μm in diameter are fabricated from single-crystal silicon and integrated onto silicon cantilevers with tips for scanning. We measure a focused spot size of λ/5 with optical throughput better than 10-1 at a wavelength of λ = 9.3 μm. Spatial resolution is improved to λ/10 with metal apertures fabricated directly on the tip of the silicon SIL. Microlenses have reduced spherical aberration and better transparency than large lenses but cannot be made arbitrarily small and still focus. We model the advantages and limitations of focusing in lenses close to the wavelength in diameter using an extension of Mie theory. We also investigate a new contrast mechanism unique to microlenses resulting from the decrease in field-of-view with lens diameter. This technique is shown to achieve λ/4 spatial resolution. We explore applications of the microfabricated silicon SIL for high spatial resolution thermal microscopy and biological spectroscopy. Thermal radiation is collected through the SIL from a heated surface with spatial resolution four times better than that of a diffraction- limited infrared microscope. Using a Fourier-transform infrared spectrometer, we observe absorption peaks in bacteria cells positioned at the focus of the silicon SIL.

An unexpected role for the yeast nucleotide exchange factor Sil1 as a reductant acting on the molecular chaperone BiP

Science.gov (United States)

Siegenthaler, Kevin D; Pareja, Kristeen A; Wang, Jie; Sevier, Carolyn S

2017-01-01

Unfavorable redox conditions in the endoplasmic reticulum (ER) can decrease the capacity for protein secretion, altering vital cell functions. While systems to manage reductive stress are well-established, how cells cope with an overly oxidizing ER remains largely undefined. In previous work (Wang et al., 2014), we demonstrated that the chaperone BiP is a sensor of overly oxidizing ER conditions. We showed that modification of a conserved BiP cysteine during stress beneficially alters BiP chaperone activity to cope with suboptimal folding conditions. How this cysteine is reduced to reestablish 'normal' BiP activity post-oxidative stress has remained unknown. Here we demonstrate that BiP's nucleotide exchange factor – Sil1 – can reverse BiP cysteine oxidation. This previously unexpected reductant capacity for yeast Sil1 has potential implications for the human ataxia Marinesco-Sjögren syndrome, where it is interesting to speculate that a disruption in ER redox-signaling (due to genetic defects in SIL1) may influence disease pathology. DOI: http://dx.doi.org/10.7554/eLife.24141.001 PMID:28257000

Higher proliferation of peritumoral endothelial cells to IL-6/sIL-6R than tumoral endothelial cells in hepatocellular carcinoma

International Nuclear Information System (INIS)

Zhuang, Peng-Yuan; Wang, Jian-Dong; Tang, Zhao-Hui; Zhou, Xue-Ping; Quan, Zhi-Wei; Liu, Ying-Bin; Shen, Jun

2015-01-01

This study aimed to explore the responses to the interleukin-6 (IL-6)/soluble interleukin-6 receptor (sIL-6R) complex in peritumoral endothelial cells (PECs) and tumor endothelial cells (TECs), as well as determine the signaling pathways in the angiogenesis of hepatocellular carcinoma (HCC). The expression of IL-6, IL-6R, gp130, CD68, HIF-1α, and microvessel density (MVD) were assessed with an orthotopic xenograft model in nude mice. ECs were incubated under hypoxic conditions to detect IL-6 and gp130. The proliferation of PECs and TECs in the presence of IL-6 and sIL-6R, as well as the expression of gp130, JAK2/STAT3, PI3K/AKT in endothelial cells were measured. Peritumoral IL-6, IL-6R, gp130, CD68, and HIF-1α expression, as well as MVD, gradually increased during tumor growth. Hypoxia could directly induce IL-6 expression, but not gp130 in PECs. The co-culture of IL-6/sIL-6R induced much higher PEC proliferation and gp130 expression, as well as the elevated phosphorylation of JAK2 and STAT3, however not the phosphorylation of PI3K and AKT. PECs exhibited higher proliferation in response to IL-6/sIL-6R co-treatment compared with TECs in HCC via the up-regulation of gp130 /JAK2/STAT3. PEC and its associated peritumoral angiogenesis microenvironment may be a potential novel target for anti-angiogenic treatment. The online version of this article (doi:10.1186/s12885-015-1763-2) contains supplementary material, which is available to authorized users

O medo e o silêncio na ficção de Boris Schnaiderman

Directory of Open Access Journals (Sweden)

Ivone Gomes de Assis

2014-05-01

Full Text Available Este artigo aborda duas poéticas apresentadas em Guerra em surdina, de Boris Schnaiderman: o medo e o silêncio. Não se trata de uma condição isolada, mas, de experiências relatadas pelo personagem João Afonso, durante seu período de combate, na Segunda Guerra Mundial, na Itália

Efficacy and safety of TachoSil® versus standard treatment of air leakage after pulmonary lobectomy

DEFF Research Database (Denmark)

Marta, Gabriel Mihai; Facciolo, Francesco; Ladegaard, Lars

2010-01-01

Alveolar air leakage remains a serious problem in lung surgery, being associated with increased postoperative morbidity, prolonged hospital stay and greater health-care costs. The aim of this study was to evaluate the sealing efficacy and safety of the surgical patch, TachoSil®, in lung surgery....

Clinical significance of the changes of serum levels of the rheumatoid activity markers IL-2, sIL-2R, HA and VEGF

International Nuclear Information System (INIS)

Bao Yong; Long Wubin; Yu Ke; Zeng Ying; Liu Deying

2004-01-01

Objective: To explore the relationship between rheumatoid activity and serum levels of the cytokines interleukin-2 (IL-2), soluble interleukin-2 receptor (sIL-2R), hyaluronic acid (HA), vascular endothelial growth factor (VEGF) in patients with rheumatoid arthritis. Methods: Serum IL-2, HA(with RIA) and sIL-2R, VEGF (with ELISA) levels were determined in 30 controls, 30 patients with active rheumatoid arthritis and 30 patients with rheumatoid arthritis in remission. Sensitivity and specificity for each marker were analyzed. Results: In patients with active rheumatoid arthritis, the serum levels of sIL-2R, HA, VEGF were significantly higher and serum levels of IL-2 significantly lower than those in patients in remission and controls (p<0.01). Determination of VEGF levels possessed the highest specificity (93.3%) and also a high sensitivity (93.3% as well). Conclusion: Determination of the serum levels of any of these markers was valuable for monitoring the activity of the rheumatoid process. It is more desirable to take measurements of VEGF levels due to its highest specificity

Silício na micropropagação de orquídeas: características morfofisiológicas

OpenAIRE

Soares, Joyce Dória Rodrigues

2013-01-01

O cultivo in vitro de espécies de orquídeas constitui a base para a propagação massal de mudas livre de doenças. Este trabalho objetivou estudar o desenvolvimento fitotécnico, o comportamento fisiológico e ultraestrutural em orquídeas micropropagadas. Três experimentos foram realizados, os quais avaliaram: 1) concentrações de silício e qualidade de luz no cultivo in vitro; 2) anatomia de espécies híbrida e nativa sob concentrações de silicio; 3) estiolamento e luz artificial na multiplicação ...

Highly Flexible, Fire Resistant HybridSil Foams for Next Generation Fireproofing, Insulation, and Energy Absorption NASA Applications, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this Phase I STTR program is to adapt NanoSonic's HybridSil™ nanocomposite technology for the creation of next generation highly flexible, fire...

Resposta do silício em condições de estresse salino em feijão caupi variedade Gurgéia

Directory of Open Access Journals (Sweden)

Anatercia Ferreira Alves

2014-12-01

Full Text Available Conduziu-se um experimento em casa de vegetação do Departamento de Ciência do Solo da Universidade Federal de Lavras com o objetivo de avaliar o efeito do silício na produção de matéria seca na cultura de feijão caupi variedade Gurgéia, submetidas a estresse salino. Adotou-se esquema fatorial em delineamento inteiramente casualizado, com 4 repetições e duas plantas por vaso de 3 L de capacidade, em que o primeiro fator referiu-se aos níveis de  NaCl (0; 25; 50; 100 e 150 mmol.L-1 e o segundo  aos níveis de SiO2 (0 e 50 mg.L-1. As soluções foram renovadas em intervalos de 15 dias e aos 90 dias após a semeadura, as plantas foram colhidas e separadas em parte aérea, vagens e raízes, em seguida foram secas para determinação da produção de matéria seca. Observou-se que a adição de silício na dose de 50 ml.L -1 de solução nutritiva contendo NaCl  diminuiu o teor de matéria seca na parte aérea e raíz, com exceção das vagens. Na ausência de silício, a produção de matéria seca nas raízes e parte aérea foram maiores nas mesmas condições de estresse salino e em baixas concentrações de NaCl. A produção de matéria seca foi estimulada na ausência de silício.

Systèmes d'innovation des pays BRICS (Brésil, Russie, Inde, Chine ...

International Development Research Centre (IDRC) Digital Library (Canada)

Le Brésil, la Russie, l'Inde, la Chine et l'Afrique du Sud (dits pays BRICS) ont placé l'innovation au coeur de leur stratégie de développement. Toutefois, les chercheurs disposent de très peu de connaissances sur le système d'innovation de chacun de ces pays et sur les répercussions qu'il a sur l'économie. La subvention ...

Effects of Surface Roughness and Mechanical Properties of Cover-Layer on Near-Field Optical Recording

Science.gov (United States)

Kim, Jin-Hong; Lee, Jun-Seok; Lim, Jungshik; Seo, Jung-Kyo

2009-03-01

Narrow gap distance in cover-layer incident near-field recording (NFR) configuration causes a collision problem in the interface between a solid immersion lens and a disk surface. A polymer cover-layer with smooth surface results in a stable gap servo while a nanocomposite cover-layer with high refractive index shows a collision problem during the gap servo test. Even though a dielectric cover-layer, in which the surface is rougher than the polymer, supplements the mechanical properties, an unclear eye pattern due to an unstable gap servo can be obtained after a chemical mechanical polishing. Not only smooth surface but also good mechanical properties of cover-layer are required for the stable gap servo in the NFR.

Superdiffusion of Carbon by Vacancies Irradiated with Soft X-Rays in CZ Silicon / Superdifūzija Ar Vakancēm Iestarota Ar Mīkstajiem Rentgenstariem CZ Silīcijā

Directory of Open Access Journals (Sweden)

Janavičius A. J.

2015-10-01

Full Text Available Rezumējums: Rentgena staru fotoni, absorbēti Si atoma iekšējos slāņos, izstaro fotoelektronus un Ožē elektronus, ģenerējot vakances, starpmezglu silīcija atomus, vakanču un skābekļa kompleksus. Čohraļska silīcija kristāli, kas pārklāti ar oglekli 0.1 μm biezuma kārtā, tika apstaroti ar rentgena stariem, izmantojot krievu difraktometru DRON-3M. Oglekļa un skābekļa difūzija un koncentrāciju izmaiņa silīcijā tika izmērīta izmantojot infrasarkano staru FTIR spektroskopiju. Rentgena staru ģenerētās ļoti ātrās oglekļa difūzijas vai superdifūzijas koeficients istabas temperatūrā silīcijā ir simtiem tūkstošu reižu lielāks nekā termodifūzijas gadījumā.

Realization of an optical interferometer based on holographic optics ...

Indian Academy of Sciences (India)

The paper describes a simple and cost effective method for the realization of an optical interferometer based on holographic optics, which use minimal bulk optical components. The optical arrangement in the proposed method involves a very simple alignment procedure and inexpensive holographic recording material is ...

Goals of patient care system change with video-based education increases rates of advance cardiopulmonary resuscitation decision-making and discussions in hospitalised rehabilitation patients.

Science.gov (United States)

Johnson, Claire E; Chong, Jeffrey C; Wilkinson, Anne; Hayes, Barbara; Tait, Sonia; Waldron, Nicholas

2017-07-01

Advance cardiopulmonary resuscitation (CPR) discussions and decision-making are not routine clinical practice in the hospital setting. Frail older patients may be at risk of non-beneficial CPR. To assess the utility and safety of two interventions to increase CPR decision-making, documentation and communication for hospitalised older patients. A pre-post study tested two interventions: (i) standard ward-based education forums with CPR content; and (ii) a combined, two-pronged strategy with 'Goals of Patient Care' (GoPC) system change and a structured video-based workshop; against usual practice (i.e. no formal training). Participants were a random sample of patients in a hospital rehabilitation unit. The outcomes were the proportion of patients documented as: (i) not for resuscitation (NFR); and (ii) eligible for rapid response team (RRT) calls, and rates of documented discussions with the patient, family and carer. When compared with usual practice, patients were more likely to be documented as NFR following the two-pronged intervention (adjusted odds ratio (aOR): 6.4, 95% confidence interval (CI): 3.0; 13.6). Documentation of discussions with patients was also more likely (aOR: 3.3, 95% CI:1.8; 6.2). Characteristics of patients documented NFR were similar between the phases, but were more likely for RRT calls following Phase 3 (P 0.03). An increase in advance CPR decisions occurred following GoPC system change with education. This appears safe as NFR patients had the same level of frailty between phases but were more likely to be eligible for RRT review. Increased documentation of discussions suggests routine use of the GoPC form may improve communication with patients about their care. © 2017 Royal Australasian College of Physicians.

Hédonismes et leurres d’un Brésil indien 

Directory of Open Access Journals (Sweden)

Alessandra Russo

2005-06-01

Full Text Available Comment exposer aujourd’hui des objets "non-occidentaux" dans un parcours muséographique à la fois original et précis, conjurant les dangers du "politically correct" ? Sans doute, s’agit-il là de l’un des grands débats du XXIe siècle. A l’heure où les plus importants musées d’anthropologie du monde réaménagent leurs collections (Mexico, Vienne, Paris, Genève,…, l’exposition Brésil indien présentée au Grand Palais de Paris donne matière à réfléchir. En invitant le public à "une approch...

Fiber-optical accelerometers based on polymer optical fiber Bragg gratings

DEFF Research Database (Denmark)

Yuan, Scott Wu; Stefani, Alessio; Bang, Ole

2010-01-01

Fiber-optical accelerometers based on polymer optical fiber Bragg gratings (FBGs) are reported. We have written 3mm FBGs for 1550nm operation, characterized their temperature and strain response, and tested their performance in a prototype accelerometer.......Fiber-optical accelerometers based on polymer optical fiber Bragg gratings (FBGs) are reported. We have written 3mm FBGs for 1550nm operation, characterized their temperature and strain response, and tested their performance in a prototype accelerometer....

All-optical microwave signal processing based on optical phase modulation

Science.gov (United States)

Zeng, Fei

This thesis presents a theoretical and experimental study of optical phase modulation and its applications in all-optical microwave signal processing, which include all-optical microwave filtering, all-optical microwave mixing, optical code-division multiple-access (CDMA) coding, and ultrawideband (UWB) signal generation. All-optical microwave signal processing can be considered as the use of opto-electronic devices and systems to process microwave signals in the optical domain, which provides several significant advantages such as low loss, low dispersion, light weight, high time bandwidth products, and immunity to electromagnetic interference. In conventional approaches, the intensity of an optical carrier is modulated by a microwave signal based on direct modulation or external modulation. The intensity-modulated optical signal is then fed to a photonic circuit or system to achieve specific signal processing functionalities. The microwave signal being processed is usually obtained based on direct detection, i.e., an opto-electronic conversion by use of a photodiode. In this thesis, the research efforts are focused on the optical phase modulation and its applications in all-optical microwave signal processing. To avoid using coherent detection which is complicated and costly, simple and effective phase modulation to intensity modulation (PM-IM) conversion schemes are pursued. Based on a theoretical study of optical phase modulation, two approaches to achieving PM-IM conversions are proposed. In the first approach, the use of chromatic dispersion induced by a dispersive device to alter the phase relationships among the sidebands and the optical carrier of a phase-modulated optical signal to realize PM-IM conversion is investigated. In the second approach, instead of using a dispersive device, the PM-IM conversion is realized based on optical frequency discrimination implemented using an optical filter. We show that the proposed PM-IM conversion schemes can be

Biblioteca escolar: espaço de silêncio e interdição | School library: a place of silence and prohibition

Directory of Open Access Journals (Sweden)

Gustavo Grandini Bastos

2011-10-01

Full Text Available Resumo Postulamos que a biblioteca, ao legitimar e instaurar o silêncio em seu espaço impede de proporcionar aos leitores um espaço de possibilidades de construção de sentidos, de fuga e de contestação da ordem em que vivemos. Marcamos que, ainda mais pelo fato de trabalhar muito com alunos é complexo imaginar os mesmos se relacionando bem em um espaço tão sisudo. Ocorre ainda que quem comanda a biblioteca crê no silêncio como a ausência de sentido, ato vazio de qualquer rastro, buscando garantir uma ausência de quebrar uma segurança aparente, censurando o aluno, impedindo-o de enunciar outros sentidos além dos apresentados pelo professor, na sala de aula. Procuramos nesse trabalho, à luz da teoria discursiva, questionar e expor que o silêncio está longe de ser oco de sentidos e significados. Palavras-chave discurso; biblioteca escolar; silêncio; sentido; leitores Abstract We postulated that the library, when legitimating and to establish the silence in your space impedes of providing to the readers a space of possibilities of construction of senses, of escape and of reply of the order in that lived. We marked that, still more for the fact of working a lot with students is complex to imagine the same ones linking well in such a discerning space. It happens although who commands the library has faith in the silence as the sense absence, empty act of any trace, looking for to guarantee an absence of breaking an apparent safety, censuring the student, impeding him/it of enunciating other senses besides introduced them by the teacher, in the class room. We sought in that work, to the light of the discursive theory, to question and to expose that the silence is far away from being hollow of senses and meanings. Keywords discourse; school library; silence; sense; readers

The use of TachoSil for the prevention of postoperative complications after groin dissection in cases of gynecologic malignancy.

Science.gov (United States)

Buda, Alessandro; Fruscio, Robert; Pirovano, Cecilia; Signorelli, Mauro; Betti, Marta; Milani, Rodolfo

2012-06-01

To evaluate the effect of TachoSil in preventing postoperative complications after groin dissection performed for primary or recurrent gynecologic malignancy. In a case-control analysis, the incidence of postoperative complications-including lymphocyst formation, wound breakdown and/or infection, and chronic lymphedema-was examined among 8 patients who received TachoSil and 16 controls (standard technique) treated for vulvar cancer or recurrent ovarian/breast cancer at San Gerardo Hospital, Monza, Italy, from 2008 to 2011. Thirty-eight inguinal dissections were performed in the 24 patients. Bilateral groin dissection was performed in 14 patients (n=4 in the study group; n=10 in the control group). Patients in the study group had a lower mean daily drainage volume than those in the control group (133 mL [range, 50-356 mL] vs 320 mL [range, 67-472 mL]; Pgynecologic malignancy. Copyright © 2012 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Review article: silicon carbide. Structure, properties and processing Artigo revisão: carbeto de silício, estrtutura, propriedades e processamento

Directory of Open Access Journals (Sweden)

V. A. Izhevskyi

2000-03-01

Full Text Available In view of considerable interest in the development of liquid phase sintered structural and high-temperature ceramics on the base of silicon carbide, a comprehensive review of the data on structure, properties and the known methods of processing of silicon carbide seems timely. The most striking feature of silicon carbide is its polytypism, i.e. formation of a great number of different structural modifications without any change in composition. Although this feature of silicon carbide was extensively studied, no systematic up to date analysis was done. However, polytypism and the tendency of the polytypes to undergo structural transformations at working temperatures may lead to uncontrollable modification of the materials properties, and therefore needs to be fully understood. Furthermore, the recently developed liquid phase sintering technique for silicon carbide densification is of an undoubtful interest and the overview of the results achieved until present time may provide some guidelines for the ceramists.Em vista do considerável interesse no desenvolvimento de cerâmicas estruturais e para aplicações em alta temperatura, é oportuna uma revisão quanto a estrutura, propriedades e métodos conhecidos de processamento de cerâmicas a base de carbeto de silício sinterizados via fase líquida. A característica mais interessante do carbeto de silício é o seu politipismo, isto é, a formação de um grande número modificações estruturais para uma mesma composição. Embora este fenômeno venha sendo extensivamente estudado, não se tem até o momento, uma análise sistemática do mesmo, o que seria de extrema importância, uma vez que o politipismo e a tendência à transformação estrutural destes politipos em temperaturas típicas de trabalho podem levar a incontroláveis modificações nas propriedades do material. Além disso, os recentes avanços obtidos na densificação do carbeto de silício através da técnica de sinteriza

Cre-/IoxP-Mediated Recombination between the SIL and SCL Genes Leads to a Block in T-Cell Development at the CD4-CD8- to CD4+CD8+ Transition

Directory of Open Access Journals (Sweden)

Yue Cheng

2007-04-01

Full Text Available In the most common form of stem cell leukemia (SCL gene rearrangement, an interstitial deletion of 82 kb brings SCL under the control of regulatory elements that normally govern expression of the ubiquitously expressed SCL interrupting locus (SIL gene, which is located directly upstream of SCL. To investigate the effect of this fusion in a mouse model, a bacterial artificial chromosome (BAC clone containing both human SIL and SCL genes was isolated, and IoxP sites were inserted into intron 1 of both the SIL and SCL genes, corresponding to the sites at which recombination occurs in human T-cell acute lymphocytic leukemia patients. This BAC clone was used to generate transgenic SILIoxloxSCL mice. These transgenic mice were subsequently bred to Lck-Cre mice that express the Cre recombinase specifically in the thymus. The BAC transgene was recombined between the two IoxP sites in over 50% of the thymocytes from SILIoxloxSCL/Cre double-transgenic mice, bringing the SCL gene under the direct control of SIL regulatory elements. Aberrant SCL gene expression in the thymus was verified by reverse transcription- polymerase chain reaction. Using FACS analysis, we found that mice carrying both SILIoxloxSCL and Cre transgenes have increased CD4-/CD8- thymocytes compared with transgenenegative mice. In the spleen, these transgenic mice show a marked reduction in the number of mature CD4+ or CD8+ cells. These results demonstrate that conditional activation of SCL under control of SIL regulatory elements can impair normal T-cell development.

Zpráva z konference o domácím násilí "A co příjde poté? Když rozchodem partnerství domácí násilí nekončí

Czech Academy of Sciences Publication Activity Database

Vohlídalová, Marta

2008-01-01

Roč. 9, č. 1 (2008), s. 68-68 ISSN 1213-0028. [„A co přijde poté? Když rozchodem partnerství domácí násilí nekončí…“. Praha, 21.11.2008] Institutional research plan: CEZ:AV0Z70280505 Keywords : domestic violence Subject RIV: AO - Sociology, Demography http://www. gender online.cz

Adhesions, inflammatory response and foreign body giant cells infiltration of the topical hemostats TachoSil®, Hemopatch™ and Veriset™

DEFF Research Database (Denmark)

Schiøtt Nissen, Line; Hunter, Jacob; Schrøder, Henrik Daa

2017-01-01

Background: When liver bleeding cannot be controlled by conventional methods, a topical hemostatic patch can be applied during surgery. In recent years new hemostats have become available. The aim of this study was to investigate the degree of adhesion and inflammation for three topical hemostatic...... patches, TachoSil®, Hemopatch™ and Veriset™. Methods: In 60 adult male Sprague Dawley rats liver two lesions were induced with a scalpel. Each rat was treated with two of the three patches tested. After 1, 2 and 3 months the animals were euthanized and macroscopic evaluation of adhesions and histological...... assessment of inflammation and macrophage infiltration were performed. Results: A significant higher (pforeign body giant cells (FBGCs) was found in Hemopatch™ and Veriset™, whereas both had a lower degree of infl ammatory and macrophage infiltration compared to TachoSil®. No differences...

The receptor kinase CERK1 has dual functions in symbiosis and immunity signalling.

Science.gov (United States)

Zhang, Xiaowei; Dong, Wentao; Sun, Jongho; Feng, Feng; Deng, Yiwen; He, Zuhua; Oldroyd, Giles E D; Wang, Ertao

2015-01-01

The establishment of symbiotic interactions between mycorrhizal fungi, rhizobial bacteria and their legume hosts involves a common symbiosis signalling pathway. This signalling pathway is activated by Nod factors produced by rhizobia and these are recognised by the Nod factor receptors NFR1/LYK3 and NFR5/NFP. Mycorrhizal fungi produce lipochitooligosaccharides (LCOs) similar to Nod factors, as well as short-chain chitin oligomers (CO4/5), implying commonalities in signalling during mycorrhizal and rhizobial associations. Here we show that NFR1/LYK3, but not NFR5/NFP, is required for the establishment of the mycorrhizal interaction in legumes. NFR1/LYK3 is necessary for the recognition of mycorrhizal fungi and the activation of the symbiosis signalling pathway leading to induction of calcium oscillations and gene expression. Chitin oligosaccharides also act as microbe associated molecular patterns that promote plant immunity via similar LysM receptor-like kinases. CERK1 in rice has the highest homology to NFR1 and we show that this gene is also necessary for the establishment of the mycorrhizal interaction as well as for resistance to the rice blast fungus. Our results demonstrate that NFR1/LYK3/OsCERK1 represents a common receptor for chitooligosaccharide-based signals produced by mycorrhizal fungi, rhizobial bacteria (in legumes) and fungal pathogens. It would appear that mycorrhizal recognition has been conserved in multiple receptors across plant species, but additional diversification in certain plant species has defined other signals that this class of receptors can perceive. © 2014 The Authors The Plant Journal © 2014 John Wiley & Sons Ltd.

Silicon based ultrafast optical waveform sampling

DEFF Research Database (Denmark)

Ji, Hua; Galili, Michael; Pu, Minhao

2010-01-01

A 300 nmx450 nmx5 mm silicon nanowire is designed and fabricated for a four wave mixing based non-linear optical gate. Based on this silicon nanowire, an ultra-fast optical sampling system is successfully demonstrated using a free-running fiber laser with a carbon nanotube-based mode-locker as th......A 300 nmx450 nmx5 mm silicon nanowire is designed and fabricated for a four wave mixing based non-linear optical gate. Based on this silicon nanowire, an ultra-fast optical sampling system is successfully demonstrated using a free-running fiber laser with a carbon nanotube-based mode......-locker as the sampling source. A clear eye-diagram of a 320 Gbit/s data signal is obtained. The temporal resolution of the sampling system is estimated to 360 fs....

Reducing Striping and Near Field Response Influence in the MODIS 1.38um Cirrus Detection Band.

Science.gov (United States)

Ackerman, S. A.; Moeller, C. C.; Frey, R. A.; Gumley, L. E.; Menzel, W. P.

2002-05-01

Since first light in February 2000, the MODIS L1B data from Terra has exhibited detector striping in the cirrus detection band at 1.38 um (B26). This band's unique characteristic is that it is potentially able to discriminate very thin cirrus (optical depth of 0.1) because water vapor absorption effectively attenuates the upwelling signal from the earth's surface, leaving a flat dark background underneath the thin cirrus. The striping has diminished the power of this band for detecting thin cirrus in the MODIS Cloud Mask (MOD35) over the global environment by imparting a structure on the background. The striping amplitude (valley to peak) is 10 - 15% of the MODIS Ltyp radiance in B26 over land backgrounds, thus exceeding the 5% radiance prelaunch accuracy specification for the band. Also unexpected has been the presence of earth surface reflectance in B26. Forward model calculations indicate that the two-way transmittance of B26 in-band (1% to 1% response) should be water (TPW) exceeds about 12 mm. However, MODIS B26 imagery has routinely shown land surface reflectance, such as Florida, even in very moist (TPW > 30 mm) tropical air masses. MODIS prelaunch test data suggests that a near field response (NFR) at about 1.3 um in the B26 filter may be contributing to this behavior. A destriping and out-of-band correction algorithm has been under development at the University of Wisconsin to address the these issues. The simple linear algorithm is based on tuning detector dependent influence coefficients for B26 as a function of B5 (1.24 um) radiance so that the corrected B26 radiance is near zero for all B26 detectors in moist atmospheric conditions. B5 was chosen as a surrogate to characterize the NFR leak in the B26 filter because of its close spectral proximity to the NFR leak. Real MODIS L1B data is being used to estimate the influence coefficients. The paper will describe the B5 based destriping and NFR correction algorithm and influence coefficient development. It

Clinical significance of measurement of changes of serum IL-2, SIL-2R levels, B lymphocyte number and T-cell subsets after chemotherapy in patients with malignant hydatidiform mole

International Nuclear Information System (INIS)

Zhang Guangcai

2007-01-01

Objective: To study the clinical significance of changes of serum IL-2, SIL-2R level, peripheral blood B lymphocyte number and T-cell subsets after chemotherapy in patients with malignant hydatidiform mole. Methods: Serum IL-2 ( with RIA), SIL-2R level (with ELISA) and peripheral blood B lymphocytes number as well as T subsets (with monoclonal antibody technique) were measured both before and after chemotherapy in 32 patients with malignant hydatidiform mole as well as in 35 controls. Results: Before chemotherapy serum SIL-2R level and B lymphocyte were significantly higher in the patients than those in controls (P<0.01), while the serum IL-2 level, CD3, CD4, CD4/CD8 were significantly lower (P<0.01). Six months after chemotherapy the levels changed markedly toward normal, but remained significantly different from those in controls (P<0.05). Conclusion: Abnormal immuno-regulation were present in patients with malignant mole. (authors)

ADAPTIVE STRATEGIES FOR INLAND TOURISTIC DESTINATIONS (SIL CANYON, GALICIA, NW SPAIN

Directory of Open Access Journals (Sweden)

Elena De Uña-Álvarez

2017-01-01

Full Text Available El potencial del turismo está relacionado en gran medida con la capacidad de reorganización e innovación de los destinos. Durante los últimos quince años, la evolución del turismo en el sector occidental del Cañón del Sil (Galicia, NO España refleja las transformaciones ante momentos de crisis. Asumiendo que el turismo es un sistema adaptativo complejo, los objetivos de esta investigación sobre un destino de interior están centrados en la interpretación de las estrategias turísticas. El estudio de la evolución del destino turístico incluye la lectura de los actores clave. Las estrategias de turismo rural cambian integrando las estrategias de turismo en la naturaleza y cultural.

Fiber optic based optical tomography sensor for monitoring plasma uniformity

International Nuclear Information System (INIS)

Benck, Eric C.; Etemadi, Kasra

2001-01-01

A new type of fiber optic based optical tomography sensor has been developed for in situ monitoring of plasma uniformity. Optical tomography inverts optical emission measurements into the actual plasma distribution without assuming radial symmetry. The new sensor is designed to operate with only two small windows and acquire the necessary data in less than a second. Optical tomography is being tested on an ICP-GEC RF plasma source. Variations in plasma uniformity are measured as a function of different plasma conditions

Clinical significance of measurement of changes of serum IL-2, SIL-2R, TNF-α levels, B lymphocyte count and T subsets distribution type after treatment in patients with vitiligo

International Nuclear Information System (INIS)

Xie Chuntao

2007-01-01

Objective: To study the changes of serum IL-2, SIL-2R, TNF-α levels B lymphocytes count and T lyonphocyte subsets distribation type after treatment in patients with vitiligo. Methods: Serum IL-2, TNF-α (with RIA), SIL-2R (with ELISA) levels, B lymphocytes count and T subsets (with monoclonal antibody technique) were examined in 40 patients with vitiligo both before and after treatment as well as in 35 controls. Results: Before treatment, serum SIL-2R, TNF-α levels and B lymphocytes count were significantly higher than those in controls (P<0.01), while the serum IL-2, CD3, CD4 levels CD4/CD8 ratio were significantly lower(P<0.01). After treatment for 6 months, the data were greatly corrected but remanied significantly different from those in controls (P<0.05). Conclusion: Vitiligo is a kind of auto-immune diseases with abnormal immuno-regulation. (authors)

Optical switches based on surface plasmons

International Nuclear Information System (INIS)

Chen Cong; Wang Pei; Yuan Guanghui; Wang Xiaolei; Min Changjun; Deng Yan; Lu Yonghua; Ming Hai

2008-01-01

Great attention is being paid to surface plasmons (SPs) because of their potential applications in sensors, data storage and bio-photonics. Recently, more and more optical switches based on surface plasmon effects have been demonstrated either by simulation or experimentally. This article describes the principles, advantages and disadvantages of various types of optical switches based on SPs, in particular the all-optical switches. (authors)

L’impact environnemental de l’usine hydroélectrique de Porto Primavera (Brésil

Directory of Open Access Journals (Sweden)

Jailton Dias

2002-12-01

Full Text Available L’implantation de l’usine hydroélectrique de Porto Primavera sur le cours du haut Paraná, au Centre-Sud du Brésil, a entraîné de grandes transformations de l’environnement et de l’organisation de l’espace. L’ampleur et la rapidité des modifications se prêtent à un suivi par télédétection. Les images Landsat™ démontrent que la construction du barrage a donné une nouvelle impulsion au développement économique régional.

Moderniser la démarche visant la qualité de l'eau au Brésil | CRDI ...

International Development Research Centre (IDRC) Digital Library (Canada)

20 sept. 2017 ... Après la rupture d'un grand barrage au sud-est du Brésil, des déchets métalliques et de boue contaminèrent l'eau et causèrent la pire catastrophe écologique de l'histoire de la nation. La recherche d'Adalto Bianchini aide son pays à réviser sa règlementation relative à une de ses ressources les plus ...

Silicon leaf application and physiological quality of white oat and wheat seedsAplicação foliar de silício e qualidade fisiológica de sementes de aveia-branca e trigo

Directory of Open Access Journals (Sweden)

Mariane Sayuri Ishizuka

2012-10-01

Full Text Available Plant nutrition can positively influence quality of seeds by improving plant tolerance to adverse climate. In this context, silicon is currently considered a micronutrient and it is beneficial to plant growth, especially Poaceaes such as white oat and wheat, thereby improving physiological quality of seeds. This study had the objective of evaluating the effects of silicon leaf application on plant tillering, silicon levels and physiological quality of white oat and wheat seeds besides establishing correlations between them. Two experiments were carried out in winter with white oat and wheat. The experimental design was the completely randomized block with eight replications. Treatments consisted of foliar application of silicon (0.8% of soluble silicon, as stabilized orthosilicic acid and a control (with no application. Silicon levels in leaves were determined at flowering whereas the number of plants and panicles/spikes per area was counted right before harvest. Seed quality was evaluated right after harvest through mass, germination and vigor tests. Data was submitted to variance analysis and means were compared by the Tukey test at a probability level of 5%. Person’s linear correlation test was performed among silicon level in plants, tillering and seed quality data. Silicon leaf application increases root and total length of white oat seedlings as an effect of higher Si level in leaves. Silicon leaf application increases mass of wheat seeds without affecting germination or vigor. A nutrição das plantas pode influenciar positivamente a qualidade das sementes por proporcionar maior tolerância às adversidades climáticas. Neste contexto, o silício é atualmente considerado um micronutriente e tem efeito benéfico no crescimento das plantas, especialmente Poaceaes como aveia-branca e trigo, consequentemente melhorando a qualidade fisiológica das sementes. Este estudo objetivou avaliar os efeitos da aplicação foliar de silício no

Autophosphorylation is essential for the in vivo function of the Lotus japonicus Nod factor receptor 1 and receptor-mediated signalling in cooperation with Nod factor receptor 5

DEFF Research Database (Denmark)

Madsen, Esben B; Antolín-Llovera, Meritxell; Grossmann, Christina

2011-01-01

and cloning of downstream components, little is known about the activation and signalling mechanisms of the Nod-factor receptors themselves. Here we show that both receptor proteins localize to the plasma membrane, and present evidence for heterocomplex formation initiating downstream signalling. Expression...... of NFR1 and NFR5 in Nicotiana benthamiana and Allium ampeloprasum (leek) cells caused a rapid cell-death response. The signalling leading to cell death was abrogated using a kinase-inactive variant of NFR1. In these surviving cells, a clear interaction between NFR1 and NFR5 was detected in vivo through...

Optical measuring system with an interrogator and a polymer-based single-mode fibre optic sensor system

DEFF Research Database (Denmark)

2017-01-01

The present invention relates to an optical measuring system comprising a polymer-based single-mode fibre-optic sensor system (102), an optical interrogator (101), and an optical arrangement (103) interconnecting the optical interrogator (101) and the polymer-based single-mode fibre-optic sensor...... system (102). The invention further relates to an optical interrogator adapted to be connected to a polymer-based single-mode fibre-optic sensor system via an optical arrangement. The interrogator comprises a broadband light source arrangement (104) and a spectrum analysing arrangement which receives...

Wideband optical vector network analyzer based on optical single-sideband modulation and optical frequency comb.

Science.gov (United States)

Xue, Min; Pan, Shilong; He, Chao; Guo, Ronghui; Zhao, Yongjiu

2013-11-15

A novel approach to increase the measurement range of the optical vector network analyzer (OVNA) based on optical single-sideband (OSSB) modulation is proposed and experimentally demonstrated. In the proposed system, each comb line in an optical frequency comb (OFC) is selected by an optical filter and used as the optical carrier for the OSSB-based OVNA. The frequency responses of an optical device-under-test (ODUT) are thus measured channel by channel. Because the comb lines in the OFC have fixed frequency spacing, by fitting the responses measured in all channels together, the magnitude and phase responses of the ODUT can be accurately achieved in a large range. A proof-of-concept experiment is performed. A measurement range of 105 GHz and a resolution of 1 MHz is achieved when a five-comb-line OFC with a frequency spacing of 20 GHz is applied to measure the magnitude and phase responses of a fiber Bragg grating.

LA RÉCENTE DINAMIQUE GEOECONOMIQUE DE LA CHAINE DE PRODUCTION DE SOJA AU BRÉSIL ET DANS LE MONDE

Directory of Open Access Journals (Sweden)

Roberto César Cunha

2015-07-01

Full Text Available L’agro-industrie de soja consolidé, au Brésil, à partir des années 1980, se constitue comme une des principales chaînes productives de la structure agricole brésilienne, offrant des grains, son de blé e d’huiles pour l’approvisionnement du marché interne et externe. Dans la récolte 2013/2014, la production a atteint plus de 87 millions de tonnes cultivées en trente millions hectares, qui représentent juste 8,9% dans la domaine cultivées au Bresil. Les exportations de soja em grains couvrent 42 millions de tonnes dans l’année agricole 2012/2013, l’équivalent a U$ 22,8 milliards. Les segments de grains, huile e son de blé ont gagné U$ S 31 milliards, qui signifie 12,8 % de toutes les ventes externes du Brésil et 31 % des exportations de l’agro-industrie brésiliens. Ce texte a pour objectif d’identifier les facteurs responsables de la recente dinamique de cette chaîne productive dans le territoire bresilien et son insertion au marché mondial.

Glass-based integrated optical splitters: engineering oriented research

Science.gov (United States)

Hao, Yinlei; Zheng, Weiwei; Yang, Jianyi; Jiang, Xiaoqing; Wang, Minghua

2010-10-01

Optical splitter is one of most typical device heavily demanded in implementation of Fiber To The Home (FTTH) system. Due to its compatibility with optical fibers, low propagation loss, flexibility, and most distinguishingly, potentially costeffectiveness, glass-based integrated optical splitters made by ion-exchange technology promise to be very attractive in application of optical communication networks. Aiming at integrated optical splitters applied in optical communication network, glass ion-exchange waveguide process is developed, which includes two steps: thermal salts ion-exchange and field-assisted ion-diffusion. By this process, high performance optical splitters are fabricated in specially melted glass substrate. Main performance parameters of these splitters, including maximum insertion loss (IL), polarization dependence loss (PDL), and IL uniformity are all in accordance with corresponding specifications in generic requirements for optic branching components (GR-1209-CORE). In this paper, glass based integrated optical splitters manufacturing is demonstrated, after which, engineering-oriented research work results on glass-based optical splitter are presented.

O silêncio no cotidiano do adolescente com HIV/AIDS

Directory of Open Access Journals (Sweden)

Maria da Graça Corso da Motta

2013-06-01

Full Text Available Este estudo caracteriza-se por ser uma pesquisa qualitativa que objetivou desvelar a percepção e a vivência em relação ao tratamento antirretroviral do adolescente com síndrome da imunodeficiência adquirida. A pesquisa foi realizada em serviços de referência em dois municípios na região sul do Brasil. A produção dos dados foi desenvolvida com a dinâmica de criatividade e sensibilidade mapa falante, por cinco participantes. Foi aplicada a técnica de análise temática do conteúdo. Das produções artísticas e depoimentos emergiram o cotidiano do uso dos medicamentos e o silêncio do diagnóstico da doença e do tratamento que implicam o cuidado à saúde. Conclui-se que é necessário o envolvimento dos profissionais de saúde, possibilitando espaços para a família e promovendo diálogos desta com o adolescente, visando à adesão ao tratamento.

Biaxial crystal-based optical tweezers

DEFF Research Database (Denmark)

Angelsky, Oleg V.; Maksimyak, Andrew P.; Maksimyak, Peter P.

2010-01-01

We suggest an optical tweezer setup based on an optically biaxial crystal. To control movements of opaque particles, we use shifts. The results of experimental studies are reported which are concerned with this laser tweezer setup. We demonstrate a movement of microparticles of toner using...... a singular-optical trap, rotation of particles due to orbital angular momentum of the field, and converging or diverging of two different traps when changing transmission plane of polariser at the input of our polarisation interferometer....

All-optical signal processing of OTDM and OFDM signals based on time-domain optical fourier transformation

DEFF Research Database (Denmark)

Galili, Michael; Guan, Pengyu; Lillieholm, Mads

2017-01-01

In the talk, we will review recent work on optical signal processing based on time lenses. Various applications of optical Fourier transformation for optical communications will be discussed.......In the talk, we will review recent work on optical signal processing based on time lenses. Various applications of optical Fourier transformation for optical communications will be discussed....

Advanced Optical Signal Processing using Time Lens based Optical Fourier Transformation

DEFF Research Database (Denmark)

Guan, Pengyu; Røge, Kasper Meldgaard; Lillieholm, Mads

2016-01-01

An overview of recent progress on time lens based advanced optical signal processing is presented, with a special focus on all-optical ultrafast 640 Gbit/s all-channel serial-to-parallel conversion, and scalable WDM regeneration....

A development optical course based on optical fiber white light interference

Science.gov (United States)

Jiang, Haili; Sun, Qiuhua; Zhao, Yancheng; Li, Qingbo

2017-08-01

The Michelson interferometer is a very important instrument in optical part for college physics teaching. But most students only know the instrument itself and don't know how to use it in practical engineering problems. A case about optical fiber white light interference based on engineering practice was introduced in the optical teaching of college physics and then designed a development course of university physical optics part. This system based on low-coherence white light interferometric technology can be used to measure distribution strain or temperature. It also could be used in the case of temperature compensation mode.This teaching design can use the knowledge transfer rule to enable students to apply the basic knowledge in the university physics to the new knowledge domain, which can promote the students' ability of using scientific methods to solve complex engineering problems.

Evaluation of radar-derived precipitation estimates using runoff simulation : report for the NFR Energy Norway funded project 'Utilisation of weather radar data in atmospheric and hydrological models'

Energy Technology Data Exchange (ETDEWEB)

Abdella, Yisak; Engeland, Kolbjoern; Lepioufle, Jean-Marie

2012-11-01

This report presents the results from the project called 'Utilisation of weather radar data in atmospheric and hydrological models' funded by NFR and Energy Norway. Three precipitation products (radar-derived, interpolated and combination of the two) were generated as input for hydrological models. All the three products were evaluated by comparing the simulated and observed runoff at catchments. In order to expose any bias in the precipitation inputs, no precipitation correction factors were applied. Three criteria were used to measure the performance: Nash, correlation coefficient, and bias. The results shows that the simulations with the combined precipitation input give the best performance. We also see that the radar-derived precipitation estimates give reasonable runoff simulation even without a region specific parameters for the Z-R relationship. All the three products resulted in an underestimation of the estimated runoff, revealing a systematic bias in measurements (e.g. catch deficit, orographic effects, Z-R relationships) that can be improved. There is an important potential of using radar-derived precipitation for simulation of runoff, especially in catchments without precipitation gauges inside.(Author)

Expression and purification of Nod factor receptors - Initial characterization of ligand binding

DEFF Research Database (Denmark)

Broghammer, Angelique

Carbohydrate signals have been shown to regulate defence, growth and development in plants. Decorated chitin molecules, lipochitooligosaccharides, synthesized and secreted by rhizobia are the major signal molecules initiating the plant processes establishing legume-rhizobia symbiosis. Lipochitool......Carbohydrate signals have been shown to regulate defence, growth and development in plants. Decorated chitin molecules, lipochitooligosaccharides, synthesized and secreted by rhizobia are the major signal molecules initiating the plant processes establishing legume-rhizobia symbiosis...... and LjNFR5 ectodomains were glycosylated; 3) LjNFR1 retained its in vitro kinase activity and 4) LjNFR1 and LjNFR5 were localized to the plasma membrane. In depth mass spectroscopy analysis of the N-glycan structure of LjNFR5 resulted in identification of two different glycan structures with identical...

Gallium-based avalanche photodiode optical crosstalk

International Nuclear Information System (INIS)

Blazej, Josef; Prochazka, Ivan; Hamal, Karel; Sopko, Bruno; Chren, Dominik

2006-01-01

Solid-state single photon detectors based on avalanche photodiode are getting more attention in various areas of applied physics: optical sensors, quantum key distribution, optical ranging and Lidar, time-resolved spectroscopy, X-ray laser diagnostics, and turbid media imaging. Avalanche photodiodes specifically designed for single photon counting semiconductor avalanche structures have been developed on the basis of various materials: Si, Ge, GaP, GaAsP, and InGaP/InGaAs at the Czech Technical University in Prague during the last 20 years. They have been tailored for numerous applications. Trends in demand are focused on detection array construction recently. Even extremely small arrays containing a few cells are of great importance for users. Electrical crosstalk between individual gating and quenching circuits and optical crosstalk between individual detecting cells are serious limitation for array design and performance. Optical crosstalk is caused by the parasitic light emission of the avalanche which accompanies the photon detection process. We have studied in detail the optical emission of the avalanche photon counting structure in the silicon- and gallium-based photodiodes. The timing properties and spectral distribution of the emitted light have been measured for different operating conditions to quantify optical crosstalk. We conclude that optical crosstalk is an inherent property of avalanche photodiode operated in Geiger mode. The only way to minimize optical crosstalk in avalanche photodiode array is to build active quenching circuit with minimum response time

Time Lens based Optical Fourier Transformation for All-Optical Signal Processing of Spectrally-Efficient Data

DEFF Research Database (Denmark)

Guan, Pengyu; Røge, Kasper Meldgaard; Lillieholm, Mads

2017-01-01

We review recent progress in the use of time lens based optical Fourier transformation for advanced all-optical signal processing. A novel time lens based complete optical Fourier transformation (OFT) technique is introduced. This complete OFT is based on two quadratic phase-modulation stages using...... four-wave mixing (FWM), separated by a dispersive medium, which enables time-to-frequency and frequency-to-time conversions simultaneously, thus performing an exchange between the temporal and spectral profiles of the input signal. Using the proposed complete OFT, several advanced all-optical signal......, such as orthogonal frequency division multiplexing (OFDM), Nyquist wavelength-division multiplexing (Nyquist-WDM) and Nyquist optical time division multiplexing (Nyquist-OTDM) signals....

Optical stimulator for vision-based sensors

DEFF Research Database (Denmark)

Rössler, Dirk; Pedersen, David Arge Klevang; Benn, Mathias

2014-01-01

We have developed an optical stimulator system for vision-based sensors. The stimulator is an efficient tool for stimulating a camera during on-ground testing with scenes representative of spacecraft flights. Such scenes include starry sky, planetary objects, and other spacecraft. The optical...

Conventional and Indigenous Biodiversity Conservation Approach: A Comparative Study of Jachie Sacred Grove and Nkrabea Forest Reserve

Directory of Open Access Journals (Sweden)

Samuel Boadi

2017-01-01

Full Text Available Conventional managed forests and sacred groves are seldom assessed to determine their effectiveness in biodiversity conservation strategies. This study investigated tree and insect diversity in Jachie sacred grove (JSG and Nkrabea forest reserve (NFR in Ashanti region, Ghana. The study area constituted eight plots of 50 × 50 m along two 300 m long transects. Insects were sampled in eight pitfall traps, diagonally between the transects. Out of 150 individuals, 13 species in NFR and 15 species from JSG were registered. Celtis mildbraedii was the most dominant species in NFR = 43.18% and JSG = 23.58%. Mean DBH showed a significant relationship with basal area in NFR and JSG. Tree diversity and richness were higher in JSG (H′ = 1.43–2.3 ± 0.10; D = 1.8–3.69 ± 0.30 compared to NFR (H′ = 0.86–1.56 ± 0.09; D = 1.1–2.3 ± 0.57. However, insect diversity was higher in NFR (H′ = 1.34 ± 0.10 than in JSG (H′ = 0.5 ± 0.005. Camponotus furvus and Pachycondyla tarsata were most abundant in JSG and NFR, respectively. These findings will help conservationists work closely with traditional authorities in protecting sacred groves as key biodiversity hotspots.

Optical image hiding based on interference

Science.gov (United States)

Zhang, Yan; Wang, Bo

2009-11-01

Optical image processing has been paid a lot of attentions recently due to its large capacitance and fast speed. Many image encryption and hiding technologies have been proposed based on the optical technology. In conventional image encryption methods, the random phase masks are usually used as encryption keys to encode the images into random white noise distribution. However, this kind of methods requires interference technology such as holography to record complex amplitude. Furthermore, it is vulnerable to attack techniques. The image hiding methods employ the phase retrieve algorithm to encode the images into two or more phase masks. The hiding process is carried out within a computer and the images are reconstructed optically. But the iterative algorithms need a lot of time to hide the image into the masks. All methods mentioned above are based on the optical diffraction of the phase masks. In this presentation, we will propose a new optical image hiding method based on interference. The coherence lights pass through two phase masks and are combined by a beam splitter. Two beams interfere with each other and the desired image appears at the pre-designed plane. Two phase distribution masks are designed analytically; therefore, the hiding speed can be obviously improved. Simulation results are carried out to demonstrate the validity of the new proposed methods.

Le candomblé au Brésil, ou l'Afrique réinventée

OpenAIRE

Capone , Stefania

2005-01-01

Le Brésil est historiquement associé à l'idée d'un métissage – culturel et « racial » – qui aurait donné naissance à une société dépourvue de tensions raciales. La « démocratie raciale » brésilienne est ainsi devenue, dans les années 1950, un modèle à suivre pour le reste du monde. Depuis la fin des années 1970, les leaders du mouvement noir brésilien et certains représentants des maisons de culte de candomblé ont commencé à miner en profondeur ce modèle, en mettant en avant un discours « eth...

O silêncio de Deus em Morangos Silvestres e O Sétimo Selo de Ingmar Bergman

OpenAIRE

Sinay, Isadora Goldberg

2014-01-01

A presente dissertação de mestrado é composta da análise de dois longa-metragens de ficção, Morangos Silvestres e O Sétimo Selo, de Ingmar Bergman . A análise busca mapear nas duas obras a temática do silêncio de Deus, aspecto relevante na obra do cineasta em questão. Ingmar Bergman é um dos maiores nomes da arte contemporânea e seus filmes articulam filosofia e religião, tornando-os de interesse fundamental para as ciências da religião como manifestação de reflexões essenci...

Spectroscopic study of the interaction of styrylcyanine dyes Sbo, Sil and their derivatives with bovine serum albumin.

Science.gov (United States)

Kurtaliev, Eldar N

2011-07-01

The spectral-luminescent characteristics of newly synthesized styrylcyanine dyes on the base of dyes Sbo ((E)-2-(4-(dimethylamino)styryl)-3-methylbenzo[d]oxazol-3-ium iodide) and Sil ((E)-2-(4-(dimethylamino)styryl)-1,3,3-trimethyl-3H-indolium perchlorate) in aqueous solutions without and in the presence of bovine serum albumin (BSA) were studied. It was established that the absorption spectra of dyes Tol-6, Dbo-10 and Dil-10 with increasing amount of BSA appear new bands with λ(max)=505 nm, λ(max)=512 nm and λ(max)=566 nm, respectively, whose intensity increases in proportion to the amount of albumin. The intensity of the glow of the main band of fluorescence in the presence of BSA sharply increases. The binding constant (K) and the number of binding sites (N) of studied dyes with BSA were determined. The dependence of binding constants with BSA on the dipole moment of dye molecules was determined, which indicates that besides electrostatic forces of attraction between molecules styrylcyanine dyes with BSA, hydrophobic interactions are essential. © Springer Science+Business Media, LLC 2011

Integration of LCoS-SLM and LabVIEW based software to simulate fundamental optics, wave optics, and Fourier optics

Science.gov (United States)

Lyu, Bo-Han; Wang, Chen; Tsai, Chun-Wei

2017-08-01

Jasper Display Corp. (JDC) offer high reflectivity, high resolution Liquid Crystal on Silicon - Spatial Light Modulator (LCoS-SLM) which include an associated controller ASIC and LabVIEW based modulation software. Based on this LCoS-SLM, also called Education Kit (EDK), we provide a training platform which includes a series of optical theory and experiments to university students. This EDK not only provides a LabVIEW based operation software to produce Computer Generated Holograms (CGH) to generate some basic diffraction image or holographic image, but also provides simulation software to verity the experiment results simultaneously. However, we believe that a robust LCoSSLM, operation software, simulation software, training system, and training course can help students to study the fundamental optics, wave optics, and Fourier optics more easily. Based on these fundamental knowledges, they could develop their unique skills and create their new innovations on the optoelectronic application in the future.

Multicasting based optical inverse multiplexing in elastic optical network.

Science.gov (United States)

Guo, Bingli; Xu, Yingying; Zhu, Paikun; Zhong, Yucheng; Chen, Yuanxiang; Li, Juhao; Chen, Zhangyuan; He, Yongqi

2014-06-16

Optical multicasting based inverse multiplexing (IM) is introduced in spectrum allocation of elastic optical network to resolve the spectrum fragmentation problem, where superchannels could be split and fit into several discrete spectrum blocks in the intermediate node. We experimentally demonstrate it with a 1-to-7 optical superchannel multicasting module and selecting/coupling components. Also, simulation results show that, comparing with several emerging spectrum defragmentation solutions (e.g., spectrum conversion, split spectrum), IM could reduce blocking performance significantly but without adding too much system complexity as split spectrum. On the other hand, service fairness for traffic with different granularity of these schemes is investigated for the first time and it shows that IM performs better than spectrum conversion and almost as well as split spectrum, especially for smaller size traffic under light traffic intensity.

Work-related fatigue: the specific case of highly educated women in the Netherlands.

Science.gov (United States)

Verdonk, Petra; Hooftman, Wendela E; van Veldhoven, Marc J P M; Boelens, Louise R M; Koppes, Lando L J

2010-03-01

This study aims to establish the prevalence of high work-related fatigue (need for recovery, NFR) among employees and to explain group differences categorized by gender, age, and education. The study particularly aims to clarify prevalence and explanatory factors in highly educated women. In 2005 and 2006, large representative samples of 80,000 Dutch employees (net response rate 33.0%; N = 47,263) received the Netherlands working conditions survey questionnaire. First, we calculated the prevalence of high NFR for men and women with different age and education levels. The average prevalence of high NFR was 28.8% and was highest among highly educated women (35.2%) in particular those aged 50-64 years (40.3%). Second, logistic regression analyses were used to compare subgroups' NFR in relation to situational factors, working conditions, and health. Three comparisons were made: (1) highly educated women versus men; (2) highly educated versus lower educated women and; (3) older highly educated versus younger highly educated women. The situational, working conditions and health factors in our model did not explain the gender differences among highly educated employees (OR = 1.37; CI = 1.3-1.5, adjusted for all factors OR = 1.32; CI = 1.2-1.5). Despite that lower autonomy and workplace violence explained highly educated women's NFR, working fewer hours counterbalanced this. Time pressure in work largely explained the differences in NFR among women at different education levels (crude OR 1.44; CI = 1.4-1.5, adjusted OR 1.14; CI = 1.0-1.3). In the age comparison, lower health ratings, more adverse working conditions, and working as a teacher explained older highly educated women's high prevalence of high NFR (crude OR 1.32; CI = 1.2-1.5, adjusted OR 0.94; CI = 0.8-1.2). NFR has high prevalence in highly educated women (35.2%) in particular those aged 50-64 years (40.3%). Our model did not explain gender differences in NFR, because working fewer hours counterbalanced the

Mobile based optical form evaluation system

Directory of Open Access Journals (Sweden)

Asım Sinan YÜKSEL

2016-05-01

Full Text Available Optical forms that contain multiple-choice answers are widely used both for electing students and evaluating student achievements in education systems in our country and worldwide. Optical forms are evaluated by employing optical mark recognition techniques through optical readers. High cost of these machines, limited access to them, long waiting time for evaluation results make the process hard for educationists working in cities or countries. In this study, a mobile application was developed for the educationists who own mobile phones or tablets for the purpose of evaluating students' answer sheets quickly and independent of location and optical readers. Optical form recognition, reading and evaluation processes are done on the image of student's answer sheet that is taken with the mobile phone or tablet of educationist. The Android based mobile application that we developed has a user-friendly interface, high success rate and is the first of our knowledge application that operates on mobile platforms in this field.

Decoupling Solar Variability and Instrument Trends Using the Multiple Same-Irradiance-Level (MuSIL) Analysis Technique

Science.gov (United States)

Woods, Thomas N.; Eparvier, Francis G.; Harder, Jerald; Snow, Martin

2018-05-01

The solar spectral irradiance (SSI) dataset is a key record for studying and understanding the energetics and radiation balance in Earth's environment. Understanding the long-term variations of the SSI over timescales of the 11-year solar activity cycle and longer is critical for many Sun-Earth research topics. Satellite measurements of the SSI have been made since the 1970s, most of them in the ultraviolet, but recently also in the visible and near-infrared. A limiting factor for the accuracy of previous solar variability results is the uncertainties for the instrument degradation corrections, which need fairly large corrections relative to the amount of solar cycle variability at some wavelengths. The primary objective of this investigation has been to separate out solar cycle variability and any residual uncorrected instrumental trends in the SSI measurements from the Solar Radiation and Climate Experiment (SORCE) mission and the Thermosphere, Mesosphere, Ionosphere, Energetic, and Dynamics (TIMED) mission. A new technique called the Multiple Same-Irradiance-Level (MuSIL) analysis has been developed, which examines an SSI time series at different levels of solar activity to provide long-term trends in an SSI record, and the most common result is a downward trend that most likely stems from uncorrected instrument degradation. This technique has been applied to each wavelength in the SSI records from SORCE (2003 - present) and TIMED (2002 - present) to provide new solar cycle variability results between 27 nm and 1600 nm with a resolution of about 1 nm at most wavelengths. This technique, which was validated with the highly accurate total solar irradiance (TSI) record, has an estimated relative uncertainty of about 5% of the measured solar cycle variability. The MuSIL results are further validated with the comparison of the new solar cycle variability results from different solar cycles.

Duality based optical flow algorithms with applications

DEFF Research Database (Denmark)

Rakêt, Lars Lau

We consider the popular TV-L1 optical flow formulation, and the so-called duality based algorithm for minimizing the TV-L1 energy. The original formulation is extended to allow for vector valued images, and minimization results are given. In addition we consider different definitions of total...... variation regularization, and related formulations of the optical flow problem that may be used with a duality based algorithm. We present a highly optimized algorithmic setup to estimate optical flows, and give five novel applications. The first application is registration of medical images, where X......-ray images of different hands, taken using different imaging devices are registered using a TV-L1 optical flow algorithm. We propose to regularize the input images, using sparsity enhancing regularization of the image gradient to improve registration results. The second application is registration of 2D...

Miniaturized optical sensors based on lens arrays

DEFF Research Database (Denmark)

Hanson, Steen Grüner; Jakobsen, M.L.; Larsen, H.E.

2005-01-01

A suite of optical sensors based on the use of lenticular arrays for probing mechanical deflections will be displayed. The optical systems are well suited for miniaturization, and utilize speckles as the information-carriers. This implementation allows for acquiring directional information...

Singlet oxygen sensitizing materials based on porous silicone: photochemical characterization, effect of dye reloading and application to water disinfection with solar reactors.

Science.gov (United States)

Manjón, Francisco; Santana-Magaña, Montserrat; García-Fresnadillo, David; Orellana, Guillermo

2010-06-01

Photogeneration of singlet molecular oxygen ((1)O(2)) is applied to organic synthesis (photooxidations), atmosphere/water treatment (disinfection), antibiofouling materials and in photodynamic therapy of cancer. In this paper, (1)O(2) photosensitizing materials containing the dyes tris(4,4'-diphenyl-2,2'-bipyridine)ruthenium(II) (1, RDB(2+)) or tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) (2, RDP(2+)), immobilized on porous silicone (abbreviated RDB/pSil and RDP/pSil), have been produced and tested for waterborne Enterococcus faecalis inactivation using a laboratory solar simulator and a compound parabolic collector (CPC)-based solar photoreactor. In order to investigate the feasibility of its reuse, the sunlight-exposed RDP/pSil sensitizing material (RDP/pSil-a) has been reloaded with RDP(2+) (RDP/pSil-r). Surprisingly, results for bacteria inactivation with the reloaded material have demonstrated a 4-fold higher efficiency compared to those of either RDP/pSil-a, unused RDB/pSil and the original RDP/pSil. Surface and bulk photochemical characterization of the new material (RDP/pSil-r) has shown that the bactericidal efficiency enhancement is due to aggregation of the silicone-supported photosensitizer on the surface of the polymer, as evidenced by confocal fluorescence lifetime imaging microscopy (FLIM). Photogenerated (1)O(2) lifetimes in the wet sensitizer-doped silicone have been determined to be ten times longer than in water. These facts, together with the water rheology in the solar reactor and the interfacial production of the biocidal species, account for the more effective disinfection observed with the reloaded photosensitizing material. These results extend and improve the operational lifetime of photocatalytic materials for point-of-use (1)O(2)-mediated solar water disinfection.

Fiber-optic coupling based on nonimaging expanded-beam optics.

Science.gov (United States)

Moslehi, B; Ng, J; Kasimoff, I; Jannson, T

1989-12-01

We have fabricated and experimentally tested low-cost and mass-producible multimode fiber-optic couplers and connectors based on nonimaging beam-expanding optics and Liouville's theorem. Analysis indicates that a pair coupling loss of -0.25 dB can be achieved. Experimentally, we measured insertion losses as low as -0.38 dB. The beam expanders can be mass produced owing to the use of plastic injection-molding fabrication techniques and packaged in standard connector housings. This design is compatible with the fiber geometry and can yield highly stable coupling owing to its high tolerance for misalignments.

Superdiffusion of Carbon by Vacancies Irradiated with Soft X-Rays in CZ Silicon / Superdifūzija Ar Vakancēm Iestarota Ar Mīkstajiem Rentgenstariem CZ Silīcijā

Science.gov (United States)

Janavičius, A. J.; Mekys, A.; Purlys, R.; Norgėla, Ž.; Daugėla, S.; Rinkūnas, R.

2015-10-01

The soft X-ray photons absorbed in the inner K, L, M shells of Si atoms produce photoelectrons and Auger electrons, thus generating vacancies, interstitials and metastable oxygen complexes. The samples of Czochralski silicon crystals covered with 0.1 μm thickness layer of carbon have been irradiated by X-rays using different voltages of Cu anode of the Russian diffractometer DRON-3M. The influence of X-rays on the formation of point defects and vacancy complexes, and their dynamics in Cz-Si crystals have been studied by infrared absorption. We have measured and calculated dynamics of concentration of carbon and interstitial oxygen using FTIR spectroscopy at room temperature after irradiation by soft X-rays. Using transmittance measurements and nonlinear diffusion theory we have calculated densities increasing for substitutional carbon and interstitial oxygen by reactions and very fast diffusion. The superdiffusion coefficients of carbon in silicon at room temperature generated by X-rays are about hundred thousand times greater than diffusion coefficients obtained for thermodiffusion. Rezumējums: Rentgena staru fotoni, absorbēti Si atoma iekšējos slāņos, izstaro fotoelektronus un Ožē elektronus, ģenerējot vakances, starpmezglu silīcija atomus, vakanču un skābekļa kompleksus. Čohraļska silīcija kristāli, kas pārklāti ar oglekli 0.1 μm biezuma kārtā, tika apstaroti ar rentgena stariem, izmantojot krievu difraktometru DRON-3M. Oglekļa un skābekļa difūzija un koncentrāciju izmaiņa silīcijā tika izmērīta izmantojot infrasarkano staru FTIR spektroskopiju. Rentgena staru ģenerētās ļoti ātrās oglekļa difūzijas vai superdifūzijas koeficients istabas temperatūrā silīcijā ir simtiem tūkstošu reižu lielāks nekā termodifūzijas gadījumā.

All-semiconductor metamaterial-based optical circuit board at the microscale

International Nuclear Information System (INIS)

Min, Li; Huang, Lirong

2015-01-01

The newly introduced metamaterial-based optical circuit, an analogue of electronic circuit, is becoming a forefront topic in the fields of electronics, optics, plasmonics, and metamaterials. However, metals, as the commonly used plasmonic elements in an optical circuit, suffer from large losses at the visible and infrared wavelengths. We propose here a low-loss, all-semiconductor metamaterial-based optical circuit board at the microscale by using interleaved intrinsic GaAs and doped GaAs, and present the detailed design process for various lumped optical circuit elements, including lumped optical inductors, optical capacitors, optical conductors, and optical insulators. By properly combining these optical circuit elements and arranging anisotropic optical connectors, we obtain a subwavelength optical filter, which can always hold band-stop filtering function for various polarization states of the incident electromagnetic wave. All-semiconductor optical circuits may provide a new opportunity in developing low-power and ultrafast components and devices for optical information processing

Graphene-based fine-tunable optical delay line for optical beamforming in phased-array antennas.

Science.gov (United States)

Tatoli, Teresa; Conteduca, Donato; Dell'Olio, Francesco; Ciminelli, Caterina; Armenise, Mario N

2016-06-01

The design of an integrated graphene-based fine-tunable optical delay line on silicon nitride for optical beamforming in phased-array antennas is reported. A high value of the optical delay time (τg=920  ps) together with a compact footprint (4.15  mm2) and optical loss graphene-based Mach-Zehnder interferometer switches and two vertically stacked microring resonators between which a graphene capacitor is placed. The tuning range is obtained by varying the value of the voltage applied to the graphene electrodes, which controls the optical path of the light propagation and therefore the delay time. The graphene provides a faster reconfigurable time and low values of energy dissipation. Such significant advantages, together with a negligible beam-squint effect, allow us to overcome the limitations of conventional RF beamformers. A highly efficient fine-tunable optical delay line for the beamsteering of 20 radiating elements up to ±20° in the azimuth direction of a tile in a phased-array antenna of an X-band synthetic aperture radar has been designed.

Laser-based optical detection of explosives

CERN Document Server

Pellegrino, Paul M; Farrell, Mikella E

2015-01-01

Laser-Based Optical Detection of Explosives offers a comprehensive review of past, present, and emerging laser-based methods for the detection of a variety of explosives. This book: Considers laser propagation safety and explains standard test material preparation for standoff optical-based detection system evaluation Explores explosives detection using deep ultraviolet native fluorescence, Raman spectroscopy, laser-induced breakdown spectroscopy, reflectometry, and hyperspectral imaging Examines photodissociation followed by laser-induced fluorescence, photothermal methods, cavity-enhanced absorption spectrometry, and short-pulse laser-based techniques Describes the detection and recognition of explosives using terahertz-frequency spectroscopic techniques Each chapter is authored by a leading expert on the respective technology, and is structured to supply historical perspective, address current advantages and challenges, and discuss novel research and applications. Readers are left with an in-depth understa...

Analysis of blocking probability for OFDM-based variable bandwidth optical network

Science.gov (United States)

Gong, Lei; Zhang, Jie; Zhao, Yongli; Lin, Xuefeng; Wu, Yuyao; Gu, Wanyi

2011-12-01

Orthogonal Frequency Division Multiplexing (OFDM) has recently been proposed as a modulation technique. For optical networks, because of its good spectral efficiency, flexibility, and tolerance to impairments, optical OFDM is much more flexible compared to traditional WDM systems, enabling elastic bandwidth transmissions, and optical networking is the future trend of development. In OFDM-based optical network the research of blocking rate has very important significance for network assessment. Current research for WDM network is basically based on a fixed bandwidth, in order to accommodate the future business and the fast-changing development of optical network, our study is based on variable bandwidth OFDM-based optical networks. We apply the mathematical analysis and theoretical derivation, based on the existing theory and algorithms, research blocking probability of the variable bandwidth of optical network, and then we will build a model for blocking probability.

Experimental and theoretical investigation of semiconductor optical amplifier (SOA) based all-optical switches

DEFF Research Database (Denmark)

Nielsen, Mads Lønstrup

2004-01-01

This thesis analyzes semiconductor optical amplifier (SOA) based all-optical switches experimentally and through numerical simulations. These devices are candidates for optical signal processing functionalities such as wavelength conversion, regeneration, and logic processing in future transparent......, consisting of an SOA and an asymmetric MZI filter, is analyzed in the small-signal regime, and the obtainable modulation bandwidth is expressed analytically. A new optical spectrum approach to small signal analysis is introduced, and is used to assess the bandwidth enhancing effect of different optical...... filters, as well the impact of the filter phase response. Experiments at 40 Gb/s verify the predictions of the small-signal analysis. Wavelength conversion is demonstrated experimentally at 40 Gb/s using a simple filtering-assisted scheme with an ultra-low optical switching energy, and up to 80 Gb...

AIMgSil Alloy Characterization Using Transmission Electron Microscope (TEM)

International Nuclear Information System (INIS)

Masrukan; Elman, P.

1996-01-01

The aging alloy of AIMgSil containing Mg 2 Si of 1.29 % has been done with the following steps: e.q (a) part of the specimen was heated at 400 o C during 3 hours, and (b) the other part was done with solution treatment at 550 o C followed by quenching. After quenching a part of the specimen was aged at room temperature and other specimen was aged at 160 o C during 16 hours. After the specimen had been heated, then it was shaped into thin foil to be examined by Transmission Electron Microscope. The result showed that the heating at temperature of 400 o C during 3 hours created a second phase (i.e.Mg 2 Si) was like stick shape with the hexagonal structure at [0111] orientation and matrix [001], and the hardness was 31 HB. The aging of specimen at room temperature gave result a GP zone which was like the needles shape in the dislocation area of the face center cubic structure at [111] orientation and [111] matrix. The hardness obtained was 64 HB. In the other hand the aging process at temperature of 160 o C within 16 hours have resulted the precipitate which was greater than that of the former needle shaped as the face center cubic structure without dislocation at matrix with [111] orientation and [114] matrix. The hardness at this condition was 94 HB

A Millimetre-Wave Cuboid Solid Immersion Lens with Intensity-Enhanced Amplitude Mask Apodization

Science.gov (United States)

Yue, Liyang; Yan, Bing; Monks, James N.; Dhama, Rakesh; Wang, Zengbo; Minin, Oleg V.; Minin, Igor V.

2018-03-01

Photonic jet is a narrow, highly intensive, weak-diverging beam propagating into a background medium and can be produced by a cuboid solid immersion lens (SIL) in both transmission and reflection modes. Amplitude mask apodization is an optical method to further improve the spatial resolution of a SIL imaging system via reduction of waist size of photonic jet, but always leading to intensity loss due to central masking of the incoming plane wave. In this letter, we report a particularly sized millimetre-wave cuboid SIL with the intensity-enhanced amplitude mask apodization for the first time. It is able to simultaneously deliver extra intensity enhancement and waist narrowing to the produced photonic jet. Both numerical simulation and experimental verification of the intensity-enhanced apodization effect are demonstrated using a copper-masked Teflon cuboid SIL with 22-mm side length under radiation of a plane wave with 8-mm wavelength. Peak intensity enhancement and the lateral resolution of the optical system increase by about 36.0% and 36.4% in this approach, respectively.

Optical touch screen based on waveguide sensing

DEFF Research Database (Denmark)

Pedersen, Henrik Chresten; Jakobsen, Michael Linde; Hanson, Steen Grüner

2011-01-01

We disclose a simple, optical touch screen technique based on a planar injection molded polymer waveguide, a single laser, and a small linear detector array. The solution significantly reduces the complexity and cost as compared to existing optical touch technologies. Force detection of a touching...

When to Perform Antenna Measurements in a Near-Field Range or a Short Tapered Chamber

Science.gov (United States)

2017-03-01

results for future antennas under test in the most cost-effective manner (man-hours, custom mount, etc.) 15. SUBJECT TERMS electromagnetic, chamber...to obtain the results for future antennas under test (AUTs) in the most cost-effective manner (man-hours, custom mounting, etc.). The NFR and...the most cost-effective manner to obtain AUT data be established for either the NFR or tapered anechoic chamber. The NFR can obtain planar

Optical/Infrared Signatures for Space-Based Remote Sensing

National Research Council Canada - National Science Library

Picard, R. H; Dewan, E. M; Winick, J. R; O'Neil, R. R

2007-01-01

This report describes work carried out under the Air Force Research Laboratory's basic research task in optical remote-sensing signatures, entitled Optical / Infrared Signatures for Space-Based Remote Sensing...

Silica-on-silicon optical couplers and coupler based optical filters

DEFF Research Database (Denmark)

Leick, Lasse

2002-01-01

is not an adequate description of the waveguides. A simple application for an optical couplers is as a 980/1550 nm mulitmplexer for erbium doped wavguide amplifiers. A numerical analysis shows that a directional coupler has acceptable specifications, whereas a mulit mode interference coupler does not. The wavelength......This work concerns modeling and chracterization of non ampligying silica-on-silicon optical components for wavelength division mulitplexed networks. Emphasis is placed on optical couplers and how they can be used as building blocks for devices with a larger complexity. It has been investigated how...... to construct wavelength flattened and process tolerant couplers. A thorough comparison between directional couplers, multi mode interference couplers and interferometer-based couplers has been performed. Numerically all these architectures have the ability to obtain similar wavelength-flatness, but the multi...

All-optical, thermo-optical path length modulation based on the vanadium-doped fibers.

Science.gov (United States)

Matjasec, Ziga; Campelj, Stanislav; Donlagic, Denis

2013-05-20

This paper presents an all-fiber, fully-optically controlled, optical-path length modulator based on highly absorbing optical fiber. The modulator utilizes a high-power 980 nm pump diode and a short section of vanadium-co-doped single mode fiber that is heated through absorption and a non-radiative relaxation process. The achievable path length modulation range primarily depends on the pump's power and the convective heat-transfer coefficient of the surrounding gas, while the time response primarily depends on the heated fiber's diameter. An absolute optical length change in excess of 500 µm and a time-constant as short as 11 ms, were demonstrated experimentally. The all-fiber design allows for an electrically-passive and remote operation of the modulator. The presented modulator could find use within various fiber-optics systems that require optical (remote) path length control or modulation.

Potential of VIS-NIR-SWIR Spectroscopy from the Chinese Soil Spectral Library for Assessment of Nitrogen Fertilization Rates in the Paddy-Rice Region, China

Directory of Open Access Journals (Sweden)

Shuo Li

2015-05-01

Full Text Available To meet growing food demand with limited land and reduced environmental impact, soil testing and formulated fertilization methods have been widely adopted around the world. However, conventional technology for investigating nitrogen fertilization rates (NFR is time consuming and expensive. Here, we evaluated the use of visible near-infrared shortwave-infrared (VIS-NIR-SWIR: 400–2500 nm spectroscopy for the assessment of NFR to provide necessary information for fast, cost-effective and precise fertilization rating. Over 2000 samples were collected from paddy-rice fields in 10 Chinese provinces; samples were added to the Chinese Soil Spectral Library (CSSL. Two kinds of modeling strategies for NFR, quantitative estimation of soil N prior to classification and qualitative by classification, were employed using partial least squares regression (PLSR, locally weighted regression (LWR, and support vector machine discriminant analogy (SVMDA. Overall, both LWR and SVMDA had moderate accuracies with Cohen’s kappa coefficients of 0.47 and 0.48, respectively, while PLSR had fair accuracy (0.37. We conclude that VIS-NIR-SWIR spectroscopy coupled with the CSSL appears to be a viable, rapid means for the assessment of NFR in paddy-rice soil. Based on qualitative classification of soil spectral data only, it is recommended that the SVMDA be adopted for rapid implementation.

Evaluation of workload among industrial workers with the Need for Recovery Scale.

Science.gov (United States)

Moriguchi, Cristiane S; Alem, Michele E R; Coury, Helenice J C G

2011-01-01

Work conditions can overload a worker's capabilities and result in health complaints. The early identification of hazardous work conditions allows the definition of priorities for more efficient ergonomic interventions. To assess the need for recovery among industrial workers under different work conditions using the Need for Recovery Scale (NFR), and to verify the association between the scores and personal factors, occupational factors and daily activities. 191 workers (mean age of 34.5±8.3 years) from a manufactory industry participated in this study. Workers answered both a questionnaire regarding demographic and occupational factors, and daily activities as well as the NFR. Ergonomic assessment of workplace sectors was carried out based on the Ergonomic Workplace Analysis. The Pearson chi-square test (significance level 5%) was used to verify the association between NFR scores and the variables of interest. The only association was between work sector and NFR score. According to the ergonomic assessment, the work sector with the highest need for recovery also presented the worst environmental and organizational conditions. The Need for Recovery Scale proved to be a helpful tool for differentiating work sectors presenting different workload demands and contributed to the definition of intervention priorities for preserving worker health.

Fiber optic-based optical coherence tomography (OCT) for dental applications

Science.gov (United States)

Everett, Matthew J.; Colston, Bill W., Jr.; Da Silva, Luiz B.; Otis, Linda L.

1998-09-01

We have developed a hand-held fiber optic based optical coherence tomography (OCT) system for scanning of the oral cavity. We have produced, using this scanning device, in vivo cross-sectional images of hard and soft dental tissues in human volunteers. Clinically relevant anatomical structures, including the gingival margin, periodontal sulcus, and dento- enamel junction, were visible in all the images. The cemento- enamel junction and the alveolar bone were identified in approximately two thirds of the images. These images represent, or our knowledge, the first in vivo OCT images of human dental tissue.

Fiber optic based optical coherence tomography (OCT) for dental applications

Energy Technology Data Exchange (ETDEWEB)

Everett, M. J., LLNL

1998-06-02

We have developed a hand-held fiber optic based optical coherence tomography (OCT) system for scanning of the oral cavity We have produced, using this scanning device, in viva cross-sectional images of hard and soft dental tissues in human volunteers Clinically relevant anatomical structures, including the gingival margin, periodontal sulcus, and dento-enamel junction, were visible in all the images The dento-enamel junction and the alveolar bone were identifiable in approximately two thirds of the images These images represent, to our knowledge, the first in viva OCT images of human dental tissue.

Scaling architecture-on-demand based optical networks

NARCIS (Netherlands)

Meyer, Hugo; Sancho, Jose Carlos; Mrdakovic, Milica; Peng, Shuping; Simeonidou, Dimitra; Miao, Wang; Calabretta, Nicola

2016-01-01

This paper analyzes methodologies that allow scaling properly Architecture-On-Demand (AoD) based optical networks. As Data Centers and HPC systems are growing in size and complexity, optical networks seem to be the way to scale the bandwidth of current network infrastructures. To scale the number of

Microcontroller-based locking in optics experiments

International Nuclear Information System (INIS)

Huang, K.; Le Jeannic, H.; Ruaudel, J.; Morin, O.; Laurat, J.

2014-01-01

Optics experiments critically require the stable and accurate locking of relative phases between light beams or the stabilization of Fabry-Perot cavity lengths. Here, we present a simple and inexpensive technique based on a stand-alone microcontroller unit to perform such tasks. Easily programmed in C language, this reconfigurable digital locking system also enables automatic relocking and sequential functioning. Different algorithms are detailed and applied to fringe locking and to low- and high-finesse optical cavity stabilization, without the need of external modulations or error signals. This technique can readily replace a number of analog locking systems advantageously in a variety of optical experiments

Microcontroller-based locking in optics experiments.

Science.gov (United States)

Huang, K; Le Jeannic, H; Ruaudel, J; Morin, O; Laurat, J

2014-12-01

Optics experiments critically require the stable and accurate locking of relative phases between light beams or the stabilization of Fabry-Perot cavity lengths. Here, we present a simple and inexpensive technique based on a stand-alone microcontroller unit to perform such tasks. Easily programmed in C language, this reconfigurable digital locking system also enables automatic relocking and sequential functioning. Different algorithms are detailed and applied to fringe locking and to low- and high-finesse optical cavity stabilization, without the need of external modulations or error signals. This technique can readily replace a number of analog locking systems advantageously in a variety of optical experiments.

Microcontroller-based locking in optics experiments

Energy Technology Data Exchange (ETDEWEB)

Huang, K. [Laboratoire Kastler Brossel, UPMC-Sorbonne Universités, CNRS, ENS-PSL Research University, Collège de France, 4 place Jussieu, 75005 Paris (France); State Key Laboratory of Precision Spectroscopy, East China Normal University, Shanghai 200062 (China); Le Jeannic, H.; Ruaudel, J.; Morin, O.; Laurat, J., E-mail: julien.laurat@upmc.fr [Laboratoire Kastler Brossel, UPMC-Sorbonne Universités, CNRS, ENS-PSL Research University, Collège de France, 4 place Jussieu, 75005 Paris (France)

2014-12-15

Optics experiments critically require the stable and accurate locking of relative phases between light beams or the stabilization of Fabry-Perot cavity lengths. Here, we present a simple and inexpensive technique based on a stand-alone microcontroller unit to perform such tasks. Easily programmed in C language, this reconfigurable digital locking system also enables automatic relocking and sequential functioning. Different algorithms are detailed and applied to fringe locking and to low- and high-finesse optical cavity stabilization, without the need of external modulations or error signals. This technique can readily replace a number of analog locking systems advantageously in a variety of optical experiments.

Proposal for electro-optic multiplier based on dual transverse electro-optic Kerr effect.

Science.gov (United States)

Li, Changsheng

2008-10-20

A novel electro-optic multiplier is proposed, which can perform voltage multiplication operation by use of the Kerr medium exhibiting dual transverse electro-optic Kerr effect. In this kind of Kerr medium, electro-optic phase retardation is proportional to the square of its applied electric field, and orientations of the field-induced birefringent axes are only related to the direction of the field. Based on this effect, we can design an electro-optic multiplier by selecting the crystals of 6/mmm, 432, and m3m classes and isotropic Kerr media such as glass. Simple calculation demonstrates that a kind of glass-ceramic material with a large Kerr constant can be used for the design of the proposed electro-optic multiplier.

Monitoring of need for recovery and prolonged fatigue within the working population: Evaluation of reliability and agreement over time.

Science.gov (United States)

Hoofs, H; Jansen, N W H; Jansen, M W J; Kant, I J

2017-01-01

Need for recovery (NFR) and prolonged fatigue are two important concepts for monitoring short- and long-term outcomes of psychological job demands within employees. For effective monitoring it is, however, important to gain insight in the reproducibility of the instruments that are used. The objective was to assess reproducibility of the NFR scale and Checklist Individual Strength (CIS), measuring NFR and prolonged fatigue respectively, in the working population. Longitudinal data from the Maastricht Cohort Study (MCS) study was used, capturing 12,140 employees from 45 different companies at baseline. A 'working' and 'returning to work' sample was conceived for different intervals; 4-month, 1-year, and 2-year. Reliability, assessed with the interclass correlation, was high within employees with a stable work environment for the NFR scale (0.78) and CIS (0.75). The smallest detectable change, assessing the agreement, was 41.20 for the NFR scale and 31.10 for the CIS. Reliability was satisfactory for both the NFR scale and CIS. The agreement of both scales to detect a changes within employees was, however, less optimal. It is, therefore, suggested that, ideally, both instruments are placed within a broader range of instruments to effectively monitor the outcomes of psychological job demands.

All-optical virtual private network and ONUs communication in optical OFDM-based PON system.

Science.gov (United States)

Zhang, Chongfu; Huang, Jian; Chen, Chen; Qiu, Kun

2011-11-21

We propose and demonstrate a novel scheme, which enables all-optical virtual private network (VPN) and all-optical optical network units (ONUs) inter-communications in optical orthogonal frequency-division multiplexing-based passive optical network (OFDM-PON) system using the subcarrier bands allocation for the first time (to our knowledge). We consider the intra-VPN and inter-VPN communications which correspond to two different cases: VPN communication among ONUs in one group and in different groups. The proposed scheme can provide the enhanced security and a more flexible configuration for VPN users compared to the VPN in WDM-PON or TDM-PON systems. The all-optical VPN and inter-ONU communications at 10-Gbit/s with 16 quadrature amplitude modulation (16 QAM) for the proposed optical OFDM-PON system are demonstrated. These results verify that the proposed scheme is feasible. © 2011 Optical Society of America

Optimize Etching Based Single Mode Fiber Optic Temperature Sensor

OpenAIRE

Ajay Kumar; Dr. Pramod Kumar

2014-01-01

This paper presents a description of etching process for fabrication single mode optical fiber sensors. The process of fabrication demonstrates an optimized etching based method to fabricate single mode fiber (SMF) optic sensors in specified constant time and temperature. We propose a single mode optical fiber based temperature sensor, where the temperature sensing region is obtained by etching its cladding diameter over small length to a critical value. It is observed that th...

L’enjeu du régionalisme dans les relations entre les pays émergents. Le cas du Brésil et de l’Afrique du Sud

Directory of Open Access Journals (Sweden)

Audrey Lauriello

2011-01-01

Full Text Available La présente contribution se penche sur la place accordée au régionalisme dans les relations entre les pays dits «émergents» que sont le Brésil et l’Afrique du Sud. La dernière décennie a vu apparaître de nouvelles puissances qui entendent participer à l’édiction des règles régissant le comportement des États sur la scène internationale au même titre que les grandes puissances industrielles traditionnelles. À cette fin, le Brésil et l’Afrique du Sud notamment ont développé une diplomatie active et multi-niveaux et s’accordent mutuellement davantage de place dans leur agenda extérieur. Parmi les différents instruments – bilatéraux, régionaux, et multilatéraux – qu’ils mobilisent, la relation interrégionale apparaît comme un outil parmi d’autres qui vise avant tout à concrétiser leurs aspirations plus globales.

Imágenes (políticas de vida: ¿el animal?, ¿el fósil? Figuras del prisma poshumano en la obra de Nuno Ramos

Directory of Open Access Journals (Sweden)

Victoria Cóccaro

2017-07-01

Full Text Available El presente artículo analiza la figura del fósil en algunas obras del artista brasileño Nuno Ramos, a partir del debate abierto en la crítica literaria de los últimos años denominado giro animal. Desde el campo de los estudios posthumanistas, el fósil permite articular un pensamiento sobre la vida distinto a la Forma Hombre moderna, interpela sobre las nociones de vida y demanda la necesidad, entonces, de crear modos de lectura y lenguajes: ¿Cómo leer un tiempo y un espacio más allá de lo humano, desde lo (poshumano? Nuno Ramos trabajará con el tacto (como lectura que excede a lo lingüístico y la materia (como lenguaje con asignificantes en obras plásticas y escritas que dan tratamiento al lenguaje y a los materiales plásticos como minerales o fósiles, materias que erosionan los límites entre lo orgánico y lo inorgánico, lo vivo y lo muerto.

Nas sombras da Ditadura: as marcas da violência em Uma varanda sobre o silêncio e De amor y de sombra

Directory of Open Access Journals (Sweden)

Cristiane Aparecida da Rosa Rossi

2015-06-01

Full Text Available Com base no estudo dos romances Uma varanda sobre o silêncio, do escritor brasileiro Josué Montello (1917-2006, e De amor y de sombra, da escritora chilena Isabel Allende (1942, pretendemos compreender a maneira como o autoritarismo político instaurado no Brasil, a partir de 1964 a 1985, conforma a vida do indivíduo, de modo a cercear sua liberdade, impedindo-o de agir livremente. Com base nisso, dizemos que o estado autoritário age como coator e intensificador do sofrimento humano, de modo a tornar o cidadão comum incapaz de governar sua vida, sem que a opressão condicione sua conduta. Dessa forma, a fim de realizarmos este estudo, faremos uma análise comparativa dos referidos romances, aliando-os à pesquisa bibliográfica. Os resultados apontarão para os desaparecimentos de Mário Júlio e de Evangelina Ranquileo como exemplos, casos de violência comumente encontrados no Brasil e no Chile, no período que sucedeu o golpe militar de 1964.

Silicon carbide optics for space and ground based astronomical telescopes

Science.gov (United States)

Robichaud, Joseph; Sampath, Deepak; Wainer, Chris; Schwartz, Jay; Peton, Craig; Mix, Steve; Heller, Court

2012-09-01

Silicon Carbide (SiC) optical materials are being applied widely for both space based and ground based optical telescopes. The material provides a superior weight to stiffness ratio, which is an important metric for the design and fabrication of lightweight space telescopes. The material also has superior thermal properties with a low coefficient of thermal expansion, and a high thermal conductivity. The thermal properties advantages are important for both space based and ground based systems, which typically need to operate under stressing thermal conditions. The paper will review L-3 Integrated Optical Systems - SSG’s (L-3 SSG) work in developing SiC optics and SiC optical systems for astronomical observing systems. L-3 SSG has been fielding SiC optical components and systems for over 25 years. Space systems described will emphasize the recently launched Long Range Reconnaissance Imager (LORRI) developed for JHU-APL and NASA-GSFC. Review of ground based applications of SiC will include supporting L-3 IOS-Brashear’s current contract to provide the 0.65 meter diameter, aspheric SiC secondary mirror for the Advanced Technology Solar Telescope (ATST).

Optical phantoms of varying geometry based on thin building blocks with controlled optical properties

NARCIS (Netherlands)

de Bruin, Daniel M.; Bremmer, Rolf H.; Kodach, Vitali M.; de Kinkelder, Roy; van Marle, Jan; van Leeuwen, Ton G.; Faber, Dirk J.

2010-01-01

Current innovations in optical imaging, measurement techniques, and data analysis algorithms express the need for reliable testing and comparison methods. We present the design and characterization of silicone elastomer-based optical phantoms. Absorption is included by adding a green dye and

Accurate optical vector network analyzer based on optical single-sideband modulation and balanced photodetection.

Science.gov (United States)

Xue, Min; Pan, Shilong; Zhao, Yongjiu

2015-02-15

A novel optical vector network analyzer (OVNA) based on optical single-sideband (OSSB) modulation and balanced photodetection is proposed and experimentally demonstrated, which can eliminate the measurement error induced by the high-order sidebands in the OSSB signal. According to the analytical model of the conventional OSSB-based OVNA, if the optical carrier in the OSSB signal is fully suppressed, the measurement result is exactly the high-order-sideband-induced measurement error. By splitting the OSSB signal after the optical device-under-test (ODUT) into two paths, removing the optical carrier in one path, and then detecting the two signals in the two paths using a balanced photodetector (BPD), high-order-sideband-induced measurement error can be ideally eliminated. As a result, accurate responses of the ODUT can be achieved without complex post-signal processing. A proof-of-concept experiment is carried out. The magnitude and phase responses of a fiber Bragg grating (FBG) measured by the proposed OVNA with different modulation indices are superimposed, showing that the high-order-sideband-induced measurement error is effectively removed.

Limiares de reconhecimento de sentenças no silêncio em campo livre versus limiares tonais em fone em indivíduos com perda auditiva coclear Sentence recognition thresholds in silence in free field versus pure tone thresholds in individuals with hearing loss

Directory of Open Access Journals (Sweden)

Nilvia Herondina Soares Aurélio

2008-01-01

Full Text Available OBJETIVO: investigar a correlação existente entre os limiares tonais e os Limiares de Reconhecimento de Sentenças no Silêncio (LRSS e verificar, se é possível, através do audiograma estabelecer um prognóstico deste paciente sobre a sua habilidade de reconhecer a fala. MÉTODOS: foram analisados 42 indivíduos com perda auditiva coclear de grau moderado, 18 do sexo feminino e 24 do masculino, com idades entre 41 e 76 anos. Primeiramente foi realizada avaliação audiológica básica e, em seguida, a pesquisa dos Limiares de Reconhecimento de Sentenças no Silêncio, em campo livre, por meio do teste Listas de Sentenças em Português. RESULTADOS: a análise estatística evidenciou correlação significante entre o limiar de reconhecimento de sentenças no silêncio e a média das freqüências de 0,5, 1 e 2 kHz. Por sua vez, ao correlacionar os Limiares de Reconhecimento de Sentenças no Silêncio com a média das freqüências de 3, 4 e 6 kHz, não houve correlação significante. CONCLUSÃO: o prognóstico provável da habilidade de reconhecimento de fala no silêncio, pode ser feito apenas com base nos limiares das freqüências de 0,5, 1 e 2 kHz em perdas auditivas cocleares.PURPOSE: to investigate the existent correlation among pure tone thresholds and Sentence Recognition Thresholds in Silence (TRSS and to check if it is possible, through the audiogram, to set up a prognostic of the patients about their communication ability. METHODS: 42 individuals with moderate cochlear hearing loss, 18 females and 24 males, 41 to 76-year old were studied. Firstly, a basic audiologic evaluation was carried out, then a search of TRSS in free field, through the Portuguese Sentence List Test (PSLT (Costa, 1998. RESULTS: The statistical analysis showed significant correlation between the sentence recognition thresholds in silence and the average of frequencies of 0.5, 1 and 2 kHz. However, when correlating with the average frequencies of 3, 4 e 6 k

Generación controlada de nanocoloides de plata en materiales silíceos amorfos

Directory of Open Access Journals (Sweden)

Gil, C.

2004-04-01

Full Text Available Amorphous silica-based materials bulk and superficially doped with silver nanocolloids were prepared. Bulk doped glasses were obtained by conventional melting and doped monolithic slabs by sol-gel. Superficially doped glasses were obtained by ion-exchange and doped coatings by sol-gel. The samples were characterised by TEM and UV-VIS spectrophotometry. Depending on the composition, the silver incorporation process, and the thermal treatments, several colourings were obtained. By controlling these parameters, metallic silver nanocolloids can be generated in the matrices studied. Colloids aggregation and growing up depends on the matrix nature and on the experimental process carried out.

Se prepararon materiales silíceos amorfos dopados con nanocoloides de plata en masa y en superficie. Se obtuvieron vidrios dopados en masa por fusión convencional y láminas monolíticas dopadas por sol-gel. Asimismo se prepararon vidrios dopados superficialmente por cambio iónico y recubrimientos dopados por sol-gel. Los materiales se caracterizaron por MET y espectrofotometría UV-VIS. Dependiendo de la composición del material, del proceso de incorporación de la plata y de los tratamientos térmicos, se obtuvieron diferentes coloraciones. El control de estas variables permitió generar nanocoloides metálicos de plata en las matrices estudiadas. La agregación y crecimiento de los coloides depende de la naturaleza de la matriz y del proceso experimental utilizado.

Distributed Optical Fiber Sensors Based on Optical Frequency Domain Reflectometry: A review.

Science.gov (United States)

Ding, Zhenyang; Wang, Chenhuan; Liu, Kun; Jiang, Junfeng; Yang, Di; Pan, Guanyi; Pu, Zelin; Liu, Tiegen

2018-04-03

Distributed optical fiber sensors (DOFS) offer unprecedented features, the most unique one of which is the ability of monitoring variations of the physical and chemical parameters with spatial continuity along the fiber. Among all these distributed sensing techniques, optical frequency domain reflectometry (OFDR) has been given tremendous attention because of its high spatial resolution and large dynamic range. In addition, DOFS based on OFDR have been used to sense many parameters. In this review, we will survey the key technologies for improving sensing range, spatial resolution and sensing performance in DOFS based on OFDR. We also introduce the sensing mechanisms and the applications of DOFS based on OFDR including strain, stress, vibration, temperature, 3D shape, flow, refractive index, magnetic field, radiation, gas and so on.

Aspectos bioquímicos da resistência do algodoeiro à ramulose potencializada pelo silício

Directory of Open Access Journals (Sweden)

Antonia Mirian Nogueira de Moura Guerra

2013-01-01

Full Text Available Objetivou-se avaliar o efeito do silício (Si sobre a ramulose e aspectos bioquímicos da resistência do algodoeiro a essa doença. Os cultivares BRS Araçá e FM 993 foram desenvolvidos em solução nutritiva contendo (+Si ou não (-Si silício. Avaliou-se o período de incubação (PI, incidência (I, área abaixo da curva do índice da ramulose (AACIR e concentração foliar de Si (CFSi. A CFSi e o PI aumentaram em 76% e 19,5%, respectivamente, nas plantas +Si em relação às -Si, e a I e a AACIR diminuíram em 64% e 18%, respectivamente. A concentração dos compostos fenólicos solúveis totais (CFST e dos derivados da lignina-ácido tioglicólico (DLATG dos dois cultivares supridos com Si aumentou durante o progresso da ramulose, porém essa concentração foi inferior à daquelas que não receberam Si. No cultivar BRS Araçá +Si a atividade das enzimas quitinase (QUI e glicanase (GLI aumentou até os 10 dai em relação às plantas -Si. A atividade das enzimas peroxidase (POX e polifenoloxidase (PPO no cultivar BRS Araçá +Si aumentou entre 20 e 30 dai em relação às plantas -Si, enquanto na FM 993 +Si o aumento foi de até 10 dai. No cultivar FM 993 +Si, a atividade da fenilalanina amônia-liase (FAL aumentou. O fornecimento de Si às plantas de algodoeiro aumentou a resistência à ramulose mediante incremento na concentração CFST e de DLATG nos dois cultivares e na atividade das POX, PPO, QUI e GLI na BRS Araçá, e de POX e FAL na FM 993.

Threshold-Based Multiple Optical Signal Selection Scheme for Free-Space Optical Wavelength Division Multiplexing Systems

KAUST Repository

Nam, Sung Sik; Alouini, Mohamed-Slim; Zhang, Lin; Ko, Young-Chai

2017-01-01

We propose a threshold-based multiple optical signal selection scheme (TMOS) for free-space optical wavelength division multiplexing systems. With this scheme, we can obtain higher spectral efficiency while reducing the possible complexity

Optical burst switching based satellite backbone network

Science.gov (United States)

Li, Tingting; Guo, Hongxiang; Wang, Cen; Wu, Jian

2018-02-01

We propose a novel time slot based optical burst switching (OBS) architecture for GEO/LEO based satellite backbone network. This architecture can provide high speed data transmission rate and high switching capacity . Furthermore, we design the control plane of this optical satellite backbone network. The software defined network (SDN) and network slice (NS) technologies are introduced. Under the properly designed control mechanism, this backbone network is flexible to support various services with diverse transmission requirements. Additionally, the LEO access and handoff management in this network is also discussed.

Optical encoder based on a nondiffractive beam

International Nuclear Information System (INIS)

Lutenberg, Ariel; Perez-Quintian, Fernando; Rebollo, Maria A.

2008-01-01

Optical encoders are used in industrial and laboratory motion equipment to measure rotations and linear displacements. We introduce a design of an optical encoder based on a nondiffractive beam. We expect that the invariant profile and radial symmetry of the nondiffractive beam provide the design with remarkable tolerance to mechanical perturbations. We experimentally demonstrate that the proposed design generates a suitable output sinusoidal signal with low harmonic distortion. Moreover, we present a numerical model of the system based on the angular spectrum approximation whose predictions are in excellent agreement with the experimental results

Optical Slot-Waveguide Based Biochemical Sensors

Directory of Open Access Journals (Sweden)

Carlos Angulo Barrios

2009-06-01

Full Text Available Slot-waveguides allow light to be guided and strongly confined inside a nanometer-scale region of low refractive index. Thus stronger light-analyte interaction can be obtained as compared to that achievable by a conventional waveguide, in which the propagating beam is confined to the high-refractive-index core of the waveguide. In addition, slot-waveguides can be fabricated by employing CMOS compatible materials and technology, enabling miniaturization, integration with electronic, photonic and fluidic components in a chip, and mass production. These advantages have made the use of slot-waveguides for highly sensitive biochemical optical integrated sensors an emerging field. In this paper, recent achievements in slot-waveguide based biochemical sensing will be reviewed. These include slot-waveguide ring resonator based refractometric label-free biosensors, label-based optical sensing, and nano-opto-mechanical sensors.

Iterative Decoding for an Optical CDMA based Laser communication System

International Nuclear Information System (INIS)

Kim, Jin Young; Kim, Eun Cheol; Cha, Jae Sang

2008-01-01

An optical CDMA(code division multiple access)based Laser communication system has attracted much attention since it requires minimal optical Laser signal processing and it is virtually delay free, while from the theoretical point of view, its performance depends on the auto and cross correlation properties of employed sequences. Various kinds of channel coding schemes for optical CDMA based Laser communication systems have been proposed and analyzed to compensate nonideal channel and receiver conditions in impaired photon channels. In this paper, we propose and analyze an iterative decoding of optical CDMA based Laser communication signals for both shot noise limited and thermal noise limited systems. It is assumed that optical channel is an intensity modulated (IM)channel and direct detection scheme is employed to detect the received optical signal. The performance is evaluated in terms of bit error probability and throughput. It is demonstrated that the BER and throughput performance is substantially improved with interleaver length for a fixed code rate and with alphabet size of PPM (pulse position modulation). Also, the BER and throughput performance is significantly enhanced with the number of iterations for decoding process. The results in this paper can be applied to the optical CDMA based Laser communication network with multiple access applications

Iterative Decoding for an Optical CDMA based Laser communication System

Energy Technology Data Exchange (ETDEWEB)

Kim, Jin Young; Kim, Eun Cheol [Kwangwoon Univ., Seoul (Korea, Republic of); Cha, Jae Sang [Seoul National Univ. of Technology, Seoul (Korea, Republic of)

2008-11-15

An optical CDMA(code division multiple access)based Laser communication system has attracted much attention since it requires minimal optical Laser signal processing and it is virtually delay free, while from the theoretical point of view, its performance depends on the auto and cross correlation properties of employed sequences. Various kinds of channel coding schemes for optical CDMA based Laser communication systems have been proposed and analyzed to compensate nonideal channel and receiver conditions in impaired photon channels. In this paper, we propose and analyze an iterative decoding of optical CDMA based Laser communication signals for both shot noise limited and thermal noise limited systems. It is assumed that optical channel is an intensity modulated (IM)channel and direct detection scheme is employed to detect the received optical signal. The performance is evaluated in terms of bit error probability and throughput. It is demonstrated that the BER and throughput performance is substantially improved with interleaver length for a fixed code rate and with alphabet size of PPM (pulse position modulation). Also, the BER and throughput performance is significantly enhanced with the number of iterations for decoding process. The results in this paper can be applied to the optical CDMA based Laser communication network with multiple access applications.

Pupil-segmentation-based adaptive optics for microscopy

Science.gov (United States)

Ji, Na; Milkie, Daniel E.; Betzig, Eric

2011-03-01

Inhomogeneous optical properties of biological samples make it difficult to obtain diffraction-limited resolution in depth. Correcting the sample-induced optical aberrations needs adaptive optics (AO). However, the direct wavefront-sensing approach commonly used in astronomy is not suitable for most biological samples due to their strong scattering of light. We developed an image-based AO approach that is insensitive to sample scattering. By comparing images of the sample taken with different segments of the pupil illuminated, local tilt in the wavefront is measured from image shift. The aberrated wavefront is then obtained either by measuring the local phase directly using interference or with phase reconstruction algorithms similar to those used in astronomical AO. We implemented this pupil-segmentation-based approach in a two-photon fluorescence microscope and demonstrated that diffraction-limited resolution can be recovered from nonbiological and biological samples.

Inventory of atmospheric pollutant emissions in France under the Convention on long-distance transfrontier atmospheric pollution and the European directive on national emission ceilings (NEC) - CEE-NU/NFR and NEC, March 2011

International Nuclear Information System (INIS)

Mathias, Etienne; Chang, Jean-Pierre; Fontelle, Jean-Pierre; Allemand, Nadine; Jacquier, Guillaume; Andre, Jean-Marc; Joya, Romain; Deflorenne, Emmanuel; Martinet, Yann; Druart, Ariane; Nicco, Laetitia; Gavel, Antoine; Prouteau, Emilie; Gueguen, Celine; Serveau, Laetitia; Jabot, Julien; Vincent, Julien

2011-03-01

This report supplies emissions data, for France, concerning all the substances covered by the different protocols adopted under the Convention on Long Range Transboundary Air Pollution (LRTAP), under the aegis of the United Nations Economic Commission for Europe (UNECE) and by the directive on national emission ceilings (NEC). The substances covered are sulphur dioxide (SO 2 ), nitrogen oxides (NO x ), non-methane volatile organic compounds (NMVOCs), ammonia (NH 3 ), carbon monoxide (CO), total suspended particles (TSP), fine particles (PM 10 and PM 2.5 ), heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb, Se, Zn) and persistent organic pollutants (POPs) such as dioxins and furans (PCDD/F), specified polycyclic aromatic hydrocarbons (PAHs) compounds (BaP, BbF, BkF, IndPy), polychlorobiphenyls (PCBs) and hexa-chlorobenzene (HCB). Parties to the Convention have to report emissions of these substances annually. Since the edition of march 2010, results are reported in the format UNECE/NFR in accordance with the new specifications set out in the guidelines (ECE/EB.AIR/97 adopted in December 2008) defined by the United Nations Economic Commission for Europe. The results are presented at the national level of aggregation with the NFR nomenclature using 6 sectors and 109 sub-sectors. Conversely, the nomenclature used in the national inventory system to conduct inventories is the CORINAIR/ SNAP 97c nomenclature. A table of correspondence NFR/SNAP 97c is included in this report (cf. annex 10). For the entire period (going back as far as 1980) concerning each substance, estimates provided in the previous inventories have been reviewed and corrected to take into account updated statistics, improved knowledge and possible changes in methodology. Emission trends between the reference year and 2009 show a decline for most substances: - a very sharp decrease (at least 50%) for hexachlorobenzene (99%), lead (98%), dioxins and furans (95%), chromium (94%), zinc (92%), sulphur oxides (90

Photonic processing and realization of an all-optical digital comparator based on semiconductor optical amplifiers

Science.gov (United States)

Singh, Simranjit; Kaur, Ramandeep; Kaler, Rajinder Singh

2015-01-01

A module of an all-optical 2-bit comparator is analyzed and implemented using semiconductor optical amplifiers (SOAs). By employing SOA-based cross phase modulation, the optical XNOR logic is used to get an A=B output signal, where as AB¯ and A¯B> logics operations are used to realize A>B and Aoperations results along with the wide open eye diagrams are obtained. It is suggested that the proposed system would be promising in all-optical high speed networks and computing systems.

Recent Advancements in Semiconductor-based Optical Signal Processing

DEFF Research Database (Denmark)

Nielsen, M L; Mørk, Jesper

2006-01-01

Significant advancements in technology and basic understanding of device physics are bringing optical signal processing closer to a commercial breakthrough. In this paper we describe the main challenges in high-speed SOA-based switching.......Significant advancements in technology and basic understanding of device physics are bringing optical signal processing closer to a commercial breakthrough. In this paper we describe the main challenges in high-speed SOA-based switching....

An agent-based QoS provisioning mechanism for WDM optical networks

Science.gov (United States)

Ouyang, Yong; Zeng, Qingji; Yue, Ling

2004-04-01

This paper addresses QoS provisioning mechanisms in the WDM optical networks. With the appearance of metropolitan optical network, a hierarchical metro and wide area optical network will be envisioned in the near future. This hierarchical optical transport network is often divided into optical domains by geography, administration and technology, which usually employ different QoS routing algorithms and policies. To provide end-to-end optical QoS is becoming a new challenge for the optical network design. In this paper, we first give an overview of issues on the QoS provisioning in data, control and management planes of the WDM optical network. And then three provisioning approaches are analyzed and compared. Finally, we propose an agent-based hybrid centralized/distributed QoS provisioning mechanism based on the concept of domain agent. This agent-based hybrid mechanism employs centralized approach in the domain and distributed approach between domains. It offers scalability and intra-domain optimal QoS routing. It also keeps independence and interoperability between domains.

Distributed Optical Fiber Sensors Based on Optical Frequency Domain Reflectometry: A review

Directory of Open Access Journals (Sweden)

Zhenyang Ding

2018-04-01

Full Text Available Distributed optical fiber sensors (DOFS offer unprecedented features, the most unique one of which is the ability of monitoring variations of the physical and chemical parameters with spatial continuity along the fiber. Among all these distributed sensing techniques, optical frequency domain reflectometry (OFDR has been given tremendous attention because of its high spatial resolution and large dynamic range. In addition, DOFS based on OFDR have been used to sense many parameters. In this review, we will survey the key technologies for improving sensing range, spatial resolution and sensing performance in DOFS based on OFDR. We also introduce the sensing mechanisms and the applications of DOFS based on OFDR including strain, stress, vibration, temperature, 3D shape, flow, refractive index, magnetic field, radiation, gas and so on.

Distributed Optical Fiber Sensors Based on Optical Frequency Domain Reflectometry: A review

Science.gov (United States)

Wang, Chenhuan; Liu, Kun; Jiang, Junfeng; Yang, Di; Pan, Guanyi; Pu, Zelin; Liu, Tiegen

2018-01-01

Distributed optical fiber sensors (DOFS) offer unprecedented features, the most unique one of which is the ability of monitoring variations of the physical and chemical parameters with spatial continuity along the fiber. Among all these distributed sensing techniques, optical frequency domain reflectometry (OFDR) has been given tremendous attention because of its high spatial resolution and large dynamic range. In addition, DOFS based on OFDR have been used to sense many parameters. In this review, we will survey the key technologies for improving sensing range, spatial resolution and sensing performance in DOFS based on OFDR. We also introduce the sensing mechanisms and the applications of DOFS based on OFDR including strain, stress, vibration, temperature, 3D shape, flow, refractive index, magnetic field, radiation, gas and so on. PMID:29614024

Microcomputer-based real-time optical signal processing system

Science.gov (United States)

Yu, F. T. S.; Cao, M. F.; Ludman, J. E.

1986-01-01

A microcomputer-based real-time programmable optical signal processing system utilizing a Magneto-Optic Spatial Light Modulator (MOSLM) and a Liquid Crystal Light Valve (LCLV) is described. This system can perform a myriad of complicated optical operations, such as image correlation, image subtraction, matrix multiplication and many others. The important assets of this proposed system must be the programmability and the capability of real-time addressing. The design specification and the progress toward practical implementation of this proposed system are discussed. Some preliminary experimental demonstrations are conducted. The feasible applications of this proposed system to image correlation for optical pattern recognition, image subtraction for IC chip inspection and matrix multiplication for optical computing are demonstrated.

Optical-Correlator Neural Network Based On Neocognitron

Science.gov (United States)

Chao, Tien-Hsin; Stoner, William W.

1994-01-01

Multichannel optical correlator implements shift-invariant, high-discrimination pattern-recognizing neural network based on paradigm of neocognitron. Selected as basic building block of this neural network because invariance under shifts is inherent advantage of Fourier optics included in optical correlators in general. Neocognitron is conceptual electronic neural-network model for recognition of visual patterns. Multilayer processing achieved by iteratively feeding back output of feature correlator to input spatial light modulator and updating Fourier filters. Neural network trained by use of characteristic features extracted from target images. Multichannel implementation enables parallel processing of large number of selected features.

NovaSil clay intervention in Ghanaians at high risk for aflatoxicosis: II. Reduction in biomarkers of aflatoxin exposure in blood and urine.

Science.gov (United States)

Wang, P; Afriyie-Gyawu, E; Tang, Y; Johnson, N M; Xu, L; Tang, L; Huebner, H J; Ankrah, N-A; Ofori-Adjei, D; Ellis, W; Jolly, P E; Williams, J H; Wang, J-S; Phillips, T D

2008-05-01

The efficacy of NovaSil clay (NS) to reduce aflatoxin (AF) biomarkers of exposure was evaluated in 656 blood samples and 624 urine samples collected from study participants during a 3-month phase IIa clinical intervention trial in Ghana. NS was delivered before meals via capsules. Serum AFB (1)-albumin adduct was measured by radioimmunoassay and urinary AFM (1) metabolites were quantified by immunoaffinity-high-performance liquid chromatography (HPLC)-fluorescence methods. Levels of AFB (1) -albumin adduct in serum samples collected at baseline and at 1 month were similar (p = 0.2354 and p = 0.3645, respectively) among the placebo (PL), low dose (LD, 1.5 g NS day (-1)), and high dose (HD, 3.0 g NS day (-1)) groups. However, the levels of AFB (1)-albumin adduct at 3 months were significantly decreased in both the LD group (p clay can be used to reduce effectively the bioavailability of dietary AF based on a reduction of AF-specific biomarkers.

All-Optical Ultra-High-Speed OFDM to Nyquist-WDM Conversion Based on Complete Optical Fourier Transformation

DEFF Research Database (Denmark)

Guan, Pengyu; Røge, Kasper Meldgaard; Mulvad, Hans Christian Hansen

2016-01-01

We propose a novel all-optical ultra-high-speed orthogonal frequency-division multiplexing (OFDM) to Nyquist wavelength-division multiplexing (Nyquist-WDM) conversion scheme, achieved by exchanging the temporal and spectral profiles using a complete optical Fourier transformation (OFT). This scheme...... enables high-speed OFDM to Nyquist-WDM conversion without complex optical/electrical/optical conversion. The all-optical OFDM transmitter is based on the generation of OFDM symbols with a low duty cycle by rectangular temporal gating, which in combination with optical time-division multiplexing yields...... a higher symbol-rate OFDM signal. In the receiver, the converted Nyquist-WDM super-channel is WDM demultiplexed into individual Nyquist-WDM channels using a rectangular optical bandpass filter, followed by optical sampling at the intersymbol-interference free point. In the experimental demonstration...

Non-reciprocal optical mirrors based on spatio-temporal acousto-optic modulation

Science.gov (United States)

Fleury, R.; Sounas, D. L.; Alù, A.

2018-03-01

Here, we investigate a scheme to realize free-space isolators and highly non-reciprocal mirrors with weak modulation imparted by an acoustic wave. We propose a strategy to dramatically break time-reversal symmetry by exploiting resonant interactions between a travelling acoustic wave and highly resonant Fabry-Pérot modes, inducing total reflection of an optical beam at a given angle, and no reflection at the negative angle. Different from conventional acousto-optic isolators, which are based on non-resonant frequency conversion and filtering, our proposal operates at the frequency of the optical signal by tailoring the resonant properties of the structure as well as the acoustic wave frequency and intensity, enabling 50 dB isolation with modest modulation requirements. Operation in the reflection mode allows for close-to-zero insertion loss, enabling disruptive opportunities in our ability to control and manipulate photons.

Comparison of 3 tall fescue-based stocker systems.

Science.gov (United States)

Bailey, N J; Kallenbach, R L

2010-05-01

A 2-yr production study was conducted to evaluate 3 systems of growing stocker calves under rotational stocking. One group of steers was stocked on pasture from early April to mid August (spring-stocked steers = SSS), and another group of steers was stocked from early July to late October (fall-stocked steers = FSS). Steers were stratified by BW (n = 72, BW = 229 +/- 11 kg for SSS; n = 72, BW = 248 +/- 18 kg for FSS) and randomly assigned to 1 of 3 treatments. The 3 treatments were 1) rotationally stocked only (control; CON), steers rotated to a new paddock as forage availability dropped below acceptable levels in the occupied paddock; 2) rotationally stocked with distillers grains (DIST); this was the same as CON except steers were supplemented with varying amounts of distillers dried grains with solubles (DDGS) based on forage nutritive value; and 3) rotationally stocked with round-bale silage (SIL); excess forage in spring was harvested and stored as round-bale silage and fed back as needed. Total BW gain/ha over the entire grazing season did not differ between DIST and SIL (P = 0.09) steers, but both were greater than CON (P forage nutritive value resulted in consistent BW gains throughout the grazing study, whereas steers in the SIL and CON treatments gained less BW during the latter portion of the season. Controlling forage maturity by removal in the SIL treatment resulted in total BW gains/ha that were not different than the DIST treatment.

Characterization of the Bonds Developed between Calcium Silicate Hydrate and Polycarboxylate-Based Superplasticizers with Silyl Functionalities

KAUST Repository

Orozco, Carlos A.

2017-03-24

Major developments in concrete technology have been achieved with the use of polycarboxylate-based superplasticizers (PCEs) to improve the concrete rheology without increasing the mix water content. Currently, it is possible to control the fluidity of the fresh concrete and obtain stronger and more durable structures. Therefore, there is a strong incentive to understand the interactions between PCEs and cement hydrates at the atomic scale to design new customized functional PCEs according to the ever-increasing requirements of the concrete industry. Here, the bonding types generated between a PCE with silyl functionalities (PCE-Sil) and a synthetic calcium silicate hydrate (C-S-H) are analyzed using XRD, 29Si NMR spectroscopy, and synchrotron-based techniques, such as NEXAFS and EXAFS. The results indicated that the carboxylic groups present in PCE-Sil interact by a ligand-type bond with calcium, which modified not only the symmetry and coordination number of the calcium located at the surface of C-S-H but also the neighboring silicon atoms of the C-S-H. In addition, the silyl functionalities of the PCE-Sil generated covalent bonds through siloxane bridges between the silanol groups of PCE-Sil and the nonbonding oxygen located at the dimeric sites in C-S-H, forming new bridging silicon sites and subsequently increasing the silicate polymerization.

Characterization of the Bonds Developed between Calcium Silicate Hydrate and Polycarboxylate-Based Superplasticizers with Silyl Functionalities.

Science.gov (United States)

Orozco, Carlos A; Chun, Byong W; Geng, Guoqing; Emwas, Abdul H; Monteiro, Paulo J M

2017-04-11

Major developments in concrete technology have been achieved with the use of polycarboxylate-based superplasticizers (PCEs) to improve the concrete rheology without increasing the mix water content. Currently, it is possible to control the fluidity of the fresh concrete and obtain stronger and more durable structures. Therefore, there is a strong incentive to understand the interactions between PCEs and cement hydrates at the atomic scale to design new customized functional PCEs according to the ever-increasing requirements of the concrete industry. Here, the bonding types generated between a PCE with silyl functionalities (PCE-Sil) and a synthetic calcium silicate hydrate (C-S-H) are analyzed using XRD, 29 Si NMR spectroscopy, and synchrotron-based techniques, such as NEXAFS and EXAFS. The results indicated that the carboxylic groups present in PCE-Sil interact by a ligand-type bond with calcium, which modified not only the symmetry and coordination number of the calcium located at the surface of C-S-H but also the neighboring silicon atoms of the C-S-H. In addition, the silyl functionalities of the PCE-Sil generated covalent bonds through siloxane bridges between the silanol groups of PCE-Sil and the nonbonding oxygen located at the dimeric sites in C-S-H, forming new bridging silicon sites and subsequently increasing the silicate polymerization.

Characterization of the Bonds Developed between Calcium Silicate Hydrate and Polycarboxylate-Based Superplasticizers with Silyl Functionalities

KAUST Repository

Orozco, Carlos A.; Chun, Byong W.; Geng, Guoqing; Emwas, Abdul-Hamid M.; Monteiro, Paulo J. M.

2017-01-01

Major developments in concrete technology have been achieved with the use of polycarboxylate-based superplasticizers (PCEs) to improve the concrete rheology without increasing the mix water content. Currently, it is possible to control the fluidity of the fresh concrete and obtain stronger and more durable structures. Therefore, there is a strong incentive to understand the interactions between PCEs and cement hydrates at the atomic scale to design new customized functional PCEs according to the ever-increasing requirements of the concrete industry. Here, the bonding types generated between a PCE with silyl functionalities (PCE-Sil) and a synthetic calcium silicate hydrate (C-S-H) are analyzed using XRD, 29Si NMR spectroscopy, and synchrotron-based techniques, such as NEXAFS and EXAFS. The results indicated that the carboxylic groups present in PCE-Sil interact by a ligand-type bond with calcium, which modified not only the symmetry and coordination number of the calcium located at the surface of C-S-H but also the neighboring silicon atoms of the C-S-H. In addition, the silyl functionalities of the PCE-Sil generated covalent bonds through siloxane bridges between the silanol groups of PCE-Sil and the nonbonding oxygen located at the dimeric sites in C-S-H, forming new bridging silicon sites and subsequently increasing the silicate polymerization.

Laterally vibrating resonator based elasto-optic modulation in aluminum nitride

Directory of Open Access Journals (Sweden)

Siddhartha Ghosh

2016-06-01

Full Text Available An integrated strain-based optical modulator driven by a piezoelectric laterally vibrating resonator is demonstrated. The composite structure consists of an acoustic Lamb wave resonator, in which a photonic racetrack resonator is internally embedded to enable overlap of the guided optical mode with the induced strain field. Both types of resonators are defined in an aluminum nitride (AlN thin film, which rests upon a layer of silicon dioxide in order to simultaneously define optical waveguides, and the structure is released from a silicon substrate. Lateral vibrations produced by the acoustic resonator are transferred through a partially etched layer of AlN, producing a change in the effective index of the guided wave through the interaction of the strain components with the AlN elasto-optic (p coefficients. Optical modulation through the elasto-optic effect is demonstrated at electromechanically actuated frequencies of 173 MHz and 843 MHz. This device geometry further enables the development of MEMS-based optical modulators in addition to studying elasto-optic interactions in suspended piezoelectric thin films.

Attenuation measurements show that the presence of a TachoSil surgical patch will not compromise target irradiation in intra-operative electron radiation therapy or high-dose-rate brachytherapy

International Nuclear Information System (INIS)

Sarmento, Sandra; Costa, Filipa; Pereira, Alexandre; Lencart, Joana; Dias, Anabela; Cunha, Luís; Sousa, Olga; Silva, José Pedro; Santos, Lúcio

2015-01-01

Surgery of locally advanced and/or recurrent rectal cancer can be complemented with intra-operative electron radiation therapy (IOERT) to deliver a single dose of radiation directly to the unresectable margins, while sparing nearby sensitive organs/structures. Haemorrhages may occur and can affect the dose distribution, leading to an incorrect target irradiation. The TachoSil (TS) surgical patch, when activated, creates a fibrin clot at the surgical site to achieve haemostasis. The aim of this work was to determine the effect of TS on the dose distribution, and ascertain whether it could be used in combination with IOERT. This characterization was extended to include high dose rate (HDR) intraoperative brachytherapy, which is sometimes used at other institutions instead of IOERT. CT images of the TS patch were acquired for initial characterization. Dosimetric measurements were performed in a water tank phantom, using a conventional LINAC with a hard-docking system of cylindrical applicators. Percentage Depth Dose (PDD) curves were obtained, and measurements made at the depth of dose maximum for the three clinically used electron energies (6, 9 and 12MeV), first without any attenuator and then with the activated patch of TS completely covering the tip of the IOERT applicator. For HDR brachytherapy, a measurement setup was improvised using a solid water phantom and a Farmer ionization chamber. Our measurements show that the attenuation of a TachoSil patch is negligible, both for high energy electron beams (6 to 12MeV), and for a HDR 192 Ir brachytherapy source. Our results cannot be extrapolated to lower beam energies such as 50 kVp X-rays, which are sometimes used for breast IORT. The TachoSil surgical patch can be used in IORT procedures using 6MeV electron energies or higher, or HDR 192 Ir brachytherapy

Attenuation measurements show that the presence of a TachoSil surgical patch will not compromise target irradiation in intra-operative electron radiation therapy or high-dose-rate brachytherapy.

Science.gov (United States)

Sarmento, Sandra; Costa, Filipa; Pereira, Alexandre; Lencart, Joana; Dias, Anabela; Cunha, Luís; Sousa, Olga; Silva, José Pedro; Santos, Lúcio

2015-01-09

Surgery of locally advanced and/or recurrent rectal cancer can be complemented with intra-operative electron radiation therapy (IOERT) to deliver a single dose of radiation directly to the unresectable margins, while sparing nearby sensitive organs/structures. Haemorrhages may occur and can affect the dose distribution, leading to an incorrect target irradiation. The TachoSil (TS) surgical patch, when activated, creates a fibrin clot at the surgical site to achieve haemostasis. The aim of this work was to determine the effect of TS on the dose distribution, and ascertain whether it could be used in combination with IOERT. This characterization was extended to include high dose rate (HDR) intraoperative brachytherapy, which is sometimes used at other institutions instead of IOERT. CT images of the TS patch were acquired for initial characterization. Dosimetric measurements were performed in a water tank phantom, using a conventional LINAC with a hard-docking system of cylindrical applicators. Percentage Depth Dose (PDD) curves were obtained, and measurements made at the depth of dose maximum for the three clinically used electron energies (6, 9 and 12MeV), first without any attenuator and then with the activated patch of TS completely covering the tip of the IOERT applicator. For HDR brachytherapy, a measurement setup was improvised using a solid water phantom and a Farmer ionization chamber. Our measurements show that the attenuation of a TachoSil patch is negligible, both for high energy electron beams (6 to 12MeV), and for a HDR (192)Ir brachytherapy source. Our results cannot be extrapolated to lower beam energies such as 50 kVp X-rays, which are sometimes used for breast IORT. The TachoSil surgical patch can be used in IORT procedures using 6MeV electron energies or higher, or HDR (192)Ir brachytherapy.

Broadband illusion optical devices based on conformal mappings

Science.gov (United States)

Xiong, Zhan; Xu, Lin; Xu, Ya-Dong; Chen, Huan-Yang

2017-10-01

In this paper, we propose a simple method of illusion optics based on conformal mappings. By carefully developing designs with specific conformal mappings, one can make an object look like another with a significantly different shape. In addition, the illusion optical devices can work in a broadband of frequencies.

Flexible biodegradable citrate-based polymeric step-index optical fiber.

Science.gov (United States)

Shan, Dingying; Zhang, Chenji; Kalaba, Surge; Mehta, Nikhil; Kim, Gloria B; Liu, Zhiwen; Yang, Jian

2017-10-01

Implanting fiber optical waveguides into tissue or organs for light delivery and collection is among the most effective ways to overcome the issue of tissue turbidity, a long-standing obstacle for biomedical optical technologies. Here, we report a citrate-based material platform with engineerable opto-mechano-biological properties and demonstrate a new type of biodegradable, biocompatible, and low-loss step-index optical fiber for organ-scale light delivery and collection. By leveraging the rich designability and processibility of citrate-based biodegradable polymers, two exemplary biodegradable elastomers with a fine refractive index difference and yet matched mechanical properties and biodegradation profiles were developed. Furthermore, we developed a two-step fabrication method to fabricate flexible and low-loss (0.4 db/cm) optical fibers, and performed systematic characterizations to study optical, spectroscopic, mechanical, and biodegradable properties. In addition, we demonstrated the proof of concept of image transmission through the citrate-based polymeric optical fibers and conducted in vivo deep tissue light delivery and fluorescence sensing in a Sprague-Dawley (SD) rat, laying the groundwork for realizing future implantable devices for long-term implantation where deep-tissue light delivery, sensing and imaging are desired, such as cell, tissue, and scaffold imaging in regenerative medicine and in vivo optogenetic stimulation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Surface-site-selective study of valence electronic structures of clean Si(100)-2x1 using Si-L23VV Auger electron-Si-2p photoelectron coincidence spectroscopy

International Nuclear Information System (INIS)

Kakiuchi, Takuhiro; Nagaoka, Shinichi; Hashimoto, Shogo; Fujita, Narihiko; Tanaka, Masatoshi; Mase, Kazuhiko

2010-01-01

Valence electronic structures of a clean Si(100)-2x1 surface are investigated in a surface-site-selective way using Si-L 23 VV Auger electron-Si-2p photoelectron coincidence spectroscopy. The Si-L 23 VV Auger electron spectra measured in coincidence with Si-2p photoelectrons emitted from the Si up-atoms or Si 2nd-layer of Si(100)-2x1 suggest that the position where the highest density of valence electronic states located in the vicinity of the Si up-atoms is shifted by 0.8 eV towards lower binding energy relative to that in the vicinity of the Si 2nd-layer. Furthermore, the valence band maximum in the vicinity of the Si up-atoms is indicated to be shifted by 0.1 eV towards lower binding energy relative to that in the vicinity of the Si 2nd-layer. These results are direct evidence of the transfer of negative charge from the Si 2nd-layer to the Si up-atoms. (author)

Optical multiple-image encryption based on multiplane phase retrieval and interference

International Nuclear Information System (INIS)

Chen, Wen; Chen, Xudong

2011-01-01

In this paper, we propose a new method for optical multiple-image encryption based on multiplane phase retrieval and interference. An optical encoding system is developed in the Fresnel domain. A phase-only map is iteratively extracted based on a multiplane phase retrieval algorithm, and multiple plaintexts are simultaneously encrypted. Subsequently, the extracted phase-only map is further encrypted into two phase-only masks based on a non-iterative interference algorithm. During image decryption, the advantages and security of the proposed optical cryptosystem are analyzed. Numerical results are presented to demonstrate the validity of the proposed optical multiple-image encryption method

Optical spatial differentiator based on subwavelength high-contrast gratings

Science.gov (United States)

Dong, Zhewei; Si, Jiangnan; Yu, Xuanyi; Deng, Xiaoxu

2018-04-01

An optical spatial differentiator based on subwavelength high-contrast gratings (HCGs) is proposed experimentally. The spatial differentiation property of the subwavelength HCG is analyzed by calculating its spatial spectral transfer function based on the periodic waveguide theory. By employing the FDTD solutions, the performance of the subwavelength HCG spatial differentiator was investigated numerically. The subwavelength HCG differentiator with the thickness at the nanoscale was fabricated on the quartz substrate by electron beam lithography and Bosch deep silicon etching. Observed under an optical microscope with a CCD camera, the spatial differentiation of the incident field profile was obtained by the subwavelength HCG differentiator in transmission without Fourier lens. By projecting the images of slits, letter "X," and a cross on the subwavelength HCG differentiator, edge detections of images were obtained in transmission. With the nanoscale HCG structure and simple optical implementation, the proposed optical spatial differentiator provides the prospects for applications in optical computing systems and parallel data processing.

Optic axis determination by fibre-based polarization-sensitive swept-source optical coherence tomography

Energy Technology Data Exchange (ETDEWEB)

Lu Zenghai; Kasaragod, Deepa K; Matcher, Stephen J, E-mail: z.lu@sheffield.ac.uk, E-mail: s.j.matcher@sheffield.ac.uk [Department of Materials Science and Engineering, Kroto Research Institute, University of Sheffield, North Campus, Broad Lane, Sheffield, S3 7HQ (United Kingdom)

2011-02-21

We describe a fibre-based variable-incidence angle (VIA) polarization-sensitive swept-source optical coherence tomography (PS-SS-OCT) system to determine the 3D optical axis of birefringent biological tissues. Single-plane VIA-PS-OCT is also explored which requires measurement of the absolute fast-axis orientation. A state-of-the-art PS-SS-OCT system with some improvements both in hardware and software was used to determine the apparent optical birefringence of equine tendon for a number of different illumination directions. Polar and azimuthal angles of cut equine tendon were produced by the VIA method and compared with the nominal values. A quarter waveplate (QWP) and equine tendon were used as test targets to validate the fast-axis measurements using the system. Polar and azimuthal angles of cut equine tendon broadly agreed with the expected values within about 8% of the nominal values. A theoretical and experimental analysis of the effect of the sample arm fibre on determination of optical axis orientation using a proposed definition based on the orientation of the eigenpolarization ellipse experimentally confirms that this algorithm only works correctly for special settings of the sample arm fibre. A proposed algorithm based on the angle between Stokes vectors on the Poincare sphere is confirmed to work for all settings of the sample arm fibre. A calibration procedure is proposed to remove the sign ambiguity of the measured orientation and was confirmed experimentally by using the QWP.

Optic axis determination by fibre-based polarization-sensitive swept-source optical coherence tomography

International Nuclear Information System (INIS)

Lu Zenghai; Kasaragod, Deepa K; Matcher, Stephen J

2011-01-01

We describe a fibre-based variable-incidence angle (VIA) polarization-sensitive swept-source optical coherence tomography (PS-SS-OCT) system to determine the 3D optical axis of birefringent biological tissues. Single-plane VIA-PS-OCT is also explored which requires measurement of the absolute fast-axis orientation. A state-of-the-art PS-SS-OCT system with some improvements both in hardware and software was used to determine the apparent optical birefringence of equine tendon for a number of different illumination directions. Polar and azimuthal angles of cut equine tendon were produced by the VIA method and compared with the nominal values. A quarter waveplate (QWP) and equine tendon were used as test targets to validate the fast-axis measurements using the system. Polar and azimuthal angles of cut equine tendon broadly agreed with the expected values within about 8% of the nominal values. A theoretical and experimental analysis of the effect of the sample arm fibre on determination of optical axis orientation using a proposed definition based on the orientation of the eigenpolarization ellipse experimentally confirms that this algorithm only works correctly for special settings of the sample arm fibre. A proposed algorithm based on the angle between Stokes vectors on the Poincare sphere is confirmed to work for all settings of the sample arm fibre. A calibration procedure is proposed to remove the sign ambiguity of the measured orientation and was confirmed experimentally by using the QWP.

Phosphorus-based compounds for EUV multilayer optics materials

NARCIS (Netherlands)

Medvedev, Viacheslav; Yakshin, Andrey; van de Kruijs, Robbert Wilhelmus Elisabeth; Bijkerk, Frederik

2015-01-01

We have evaluated the prospects of phosphorus-based compounds in extreme ultraviolet multilayer optics. Boron phosphide (BP) is suggested to be used as a spacer material in reflective multilayer optics operating just above the L-photoabsorption edge of P (λ ≈9.2 nm). Mo, Ag, Ru, Rh, and Pd were

Les politiques d’appui à l’agriculture familiale au Brésil : quelques éléments de comparaison avec le Maroc

Directory of Open Access Journals (Sweden)

Philippe Bonnal

2015-10-01

Full Text Available Au Brésil comme au Maroc, le secteur agricole est marqué par des différences extrêmes en termes de taille d’exploitation, ainsi que de niveaux d’équipement, de capitalisation et de techniques. L’article présente la politique brésilienne d’appui à l’agriculture familiale, et quelques éléments de comparaison avec les choix faits au Maroc. Les politiques agricoles brésiliennes proposent depuis une vingtaine d’années un appui spécifique aux exploitations familiales, avec notamment la constitution d’un ministère spécifique. De nombreux dispositifs d’appui à l’agriculture familiale ont été mis en place, dont notamment des crédits à taux préférentiel et des programmes d’achat de denrées agricoles pour les institutions publiques (écoles, hôpitaux, etc.. Dans les zones rurales particulièrement fragiles, des dispositifs permettent une coordination entre l’ensemble des politiques publiques concernant ces zones. Enfin, la conception et la mise en oeuvre de ces politiques publiques se font avec une forte implication des syndicats agricoles. Les politiques publiques brésiliennes et marocaines reconnaissent la dualité du monde agricole, mais cette dualité est définie par zone au Maroc, tandis qu’elle est fondée sur des caractéristiques explicites des exploitations au Brésil. Dans les deux pays, le coeur des politiques publiques d’appui aux exploitations familiales porte sur l’aide à l’investissement. Au-delà de ce coeur commun, les politiques brésiliennes ont plus spécifiquement développé des approches au niveau des territoires locaux et associent plus fortement qu’au Maroc les organisations professionnelles agricoles représentant l’agriculture familiale dans la conception de l’action publique. La comparaison des politiques agricoles au Maroc et au Brésil sur quelques éléments permet de souligner la forte étendue des choix qu’il est possible de considérer, pour définir des

Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach

Science.gov (United States)

Jumadi, Nur Anida; Beng, Gan Kok; Ali, Mohd Alauddin Mohd; Zahedi, Edmond; Morsin, Marlia

2017-09-01

The implementation of surface-based Monte Carlo simulation technique for oxygen saturation (SaO2) calibration curve estimation is demonstrated in this paper. Generally, the calibration curve is estimated either from the empirical study using animals as the subject of experiment or is derived from mathematical equations. However, the determination of calibration curve using animal is time consuming and requires expertise to conduct the experiment. Alternatively, an optical simulation technique has been used widely in the biomedical optics field due to its capability to exhibit the real tissue behavior. The mathematical relationship between optical density (OD) and optical density ratios (ODR) associated with SaO2 during systole and diastole is used as the basis of obtaining the theoretical calibration curve. The optical properties correspond to systolic and diastolic behaviors were applied to the tissue model to mimic the optical properties of the tissues. Based on the absorbed ray flux at detectors, the OD and ODR were successfully calculated. The simulation results of optical density ratio occurred at every 20 % interval of SaO2 is presented with maximum error of 2.17 % when comparing it with previous numerical simulation technique (MC model). The findings reveal the potential of the proposed method to be used for extended calibration curve study using other wavelength pair.

Cantilever-based optical interfacial force microscope in liquid using an optical-fiber tip

Directory of Open Access Journals (Sweden)

Byung I. Kim

2013-03-01

Full Text Available We developed a novel cantilever-based optical interfacial force microscope (COIFM to study molecular interaction in liquid environments. The force sensor was created by attaching a chemically etched optical-fiber tip to the force sensor with UV epoxy, and characterized by imaging on a calibration grid. The performance of the COIFM was then demonstrated by measuring the force between two oxidized silicon surfaces in 1 mM KCl as a function of distance. The result was consistent with previously reported electrical double layer forces, suggesting that a COIFM using an optical-fiber tip is capable of measuring force in a liquid environment.

Integrated optical readout for miniaturization of cantilever-based sensor system

DEFF Research Database (Denmark)

Nordström, Maria; Zauner, Dan; Calleja, Montserrat

2007-01-01

The authors present the fabrication and characterization of an integrated optical readout scheme based on single-mode waveguides for cantilever-based sensors. The cantilever bending is read out by monitoring changes in the optical intensity of light transmitted through the cantilever that also acts...

Photodiode Based Detection for Multiple Trap Optical Tweezers

DEFF Research Database (Denmark)

Ott, Dino

This thesis is concerned with the position tracking of microscopic, optically trapped particles and the quantification of the forces acting on them. A new detection method for simultaneous, three-dimensional tracking of multiple particles is presented, its performance is evaluated, and its...... usefulness is illustrated in specific application examples. Optical traps enable contact-less, all-optical manipulation of microscopic objects. Over the last decades, this laser-based micro-manipulation tool has facilitated numerous exciting discoveries within biology and physics, and it is today regarded...

Study of the electroplating mechanism and physicochemical proprieties of deposited Ni-W-Silicate composite alloy

International Nuclear Information System (INIS)

Sassi, W.; Dhouibi, L.; Berçot, P.; Rezrazi, M.; Triki, E.

2014-01-01

In this work, layers based on Nickel-Tungsten (Ni-W) were electroplated from citrate-ammonia bath with and without silicate addition. Firstly, Electrochemical Quartz Crystal Microbalance (EQCM) and Global Discharge Optical Emission Spectroscopy (GDOES) were used to investigate the electroplating mechanism of both coatings. The gain mass was 14 and 4.13 μg cm −2 for Ni-W-Sil and Ni-W coatings, respectively. Secondly, the morphology of the composite alloy shows a smooth and homogenous surface with compact cauliflower like-structure identified as silicate incorporation. Finally, after a long immersion into chloride solution, Ni-W-Sil composite film showed a good surface stability and a remarkable mechanical hardness. These proprieties enhanced the electrochemical behavior of the composite alloy

Optical hydrogen sensors based on metal-hydrides

Science.gov (United States)

Slaman, M.; Westerwaal, R.; Schreuders, H.; Dam, B.

2012-06-01

For many hydrogen related applications it is preferred to use optical hydrogen sensors above electrical systems. Optical sensors reduce the risk of ignition by spark formation and are less sensitive to electrical interference. Currently palladium and palladium alloys are used for most hydrogen sensors since they are well known for their hydrogen dissociation and absorption properties at relatively low temperatures. The disadvantages of palladium in sensors are the low optical response upon hydrogen loading, the cross sensitivity for oxygen and carbon, the limited detection range and the formation of micro-cracks after some hydrogen absorption/desorption cycles. In contrast to Pd, we find that the use of magnesium or rear earth bases metal-hydrides in optical hydrogen sensors allow tuning of the detection levels over a broad pressure range, while maintaining a high optical response. We demonstrate a stable detection layer for detecting hydrogen below 10% of the lower explosion limit in an oxygen rich environment. This detection layer is deposited at the bare end of a glass fiber as a micro-mirror and is covered with a thin layer of palladium. The palladium layer promotes the hydrogen uptake at room temperature and acts as a hydrogen selective membrane. To protect the sensor for a long time in air a final layer of a hydrophobic fluorine based coating is applied. Such a sensor can be used for example as safety detector in automotive applications. We find that this type of fiber optic hydrogen sensor is also suitable for hydrogen detection in liquids. As example we demonstrate a sensor for detecting a broad range of concentrations in transformer oil. Such a sensor can signal a warning when sparks inside a high voltage power transformer decompose the transformer oil over a long period.

Optical reading of contaminants in aqueous media based on gold nanoparticles.

Science.gov (United States)

Du, Jianjun; Zhu, Bowen; Peng, Xiaojun; Chen, Xiaodong

2014-09-10

With increasing trends of global population growth, urbanization, pollution over-exploitation, and climate change, the safe water supply has become a global issue and is threatening our society in terms of sustainable development. Therefore, there is a growing need for a water-monitoring platform with the capability of rapidness, specificity, low-cost, and robustness. This review summarizes the recent developments in the design and application of gold nanoparticles (AuNPs) based optical assays to detect contaminants in aqueous media with a high performance. First, a brief discussion on the correlation between the optical reading strategy and the optical properties of AuNPs is presented. Then, we summarize the principle behind AuNP-based optical assays to detect different contaminants, such as toxic metal ion, anion, and pesticides, according to different optical reading strategies: colorimetry, scattering, and fluorescence. Finally, the comparison of these assays and the outlook of AuNP-based optical detection are discussed. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A la recherche de l'opérationnalité : le cas de l'agriculture familiale dans le Nordeste du Brésil

OpenAIRE

Caron, P.; Sabourin, E.; Sautier, D.; Gama da Silva, P.C.; Tonneau, J.P.

1997-01-01

Le projet d'appui au développement de l'agriculture familiale dans le Nordeste du Brésil a pour but de produire des références méthodologiques (analyse de situation et intervention) pour la recherche (identification de thèmes prioritaires), pour le développement (connaissances pour l'action) et pour la formation. Pour atteindre ces objectifs, l'équipe du projet est impliquée dans différentes opérations de développement conduites en partenariat avec des acteurs locaux, en assurant trois princi...

Light distribution analysis of optical fibre probe-based near-field optical tweezers using FDTD

Energy Technology Data Exchange (ETDEWEB)

Liu, B H; Yang, L J; Wang, Y [School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Heilongjiang, Harbin, 150001 (China)], E-mail: richelaw@163.com

2009-09-01

Optical fibre probe-based near-field optical tweezers overcomes the diffraction limit of conventional optical tweezers, utilizing strong mechanical forces and torque associated with highly enhanced electric fields to trap and manipulate nano-scale particles. Near-field evanescent wave generated at optical fibre probe decays rapidly with the distance that results a significant reduced trapping volume, thus it is necessary to analyze the near-field distribution of optical fibre probe. The finite difference time domain (FDTD) method is applied to characterize the near-field distribution of optical fibre probe. In terms of the distribution patterns, depolarization and polarization, the near-field distributions in longitudinal sections and cross-sections of tapered metal-coated optical fibre probe are calculated. The calculation results reveal that the incident polarized wave becomes depolarized after exiting from the nano-scale aperture of probe. The near-field distribution of the probe is unsymmetrical, and the near-field distribution in the cross-section vertical to the incident polarized wave is different from that in the cross-section parallel to the incident polarized wave. Moreover, the polarization of incident wave has a great impact on the light intensity distribution.

Interferometric architectures based All-Optical logic design methods and their implementations

Science.gov (United States)

Singh, Karamdeep; Kaur, Gurmeet

2015-06-01

All-Optical Signal Processing is an emerging technology which can avoid costly Optical-electronic-optical (O-E-O) conversions which are usually compulsory in traditional Electronic Signal Processing systems, thus greatly enhancing operating bit rate with some added advantages such as electro-magnetic interference immunity and low power consumption etc. In order to implement complex signal processing tasks All-Optical logic gates are required as backbone elements. This review describes the advances in the field of All-Optical logic design methods based on interferometric architectures such as Mach-Zehnder Interferometer (MZI), Sagnac Interferometers and Ultrafast Non-Linear Interferometer (UNI). All-Optical logic implementations for realization of arithmetic and signal processing applications based on each interferometric arrangement are also presented in a categorized manner.

an optical tweezer based study

Indian Academy of Sciences (India)

Shankar Ghosh

2006-11-12

Nov 12, 2006 ... Liquid-Solid interface. Liquid-liquid interface. Shankar Ghosh. Motion of a sphere in an .... Bare mass of a colloidal sphere ∼ 10^15Kg. Note : The effective mass scales with viscosity and not with the density. Shankar Ghosh. Motion of a sphere in an oscillatory boundary layer: an optical tweezer based study ...

Integrated optical isolators based on two-mode interference couplers

International Nuclear Information System (INIS)

Sun, Yiling; Zhou, Haifeng; Jiang, Xiaoqing; Hao, Yinlei; Yang, Jianyi; Wang, Minghua

2010-01-01

This paper presents an optical waveguide isolator based on two-mode interference (TMI) couplers, by utilizing the magneto-optical nonreciprocal phase shift (NPS). The operating principle of this device is to utilize the difference between the nonreciprocal phase shifts of the two lowest-order modes. A two-dimensional (2D) semi-vectorial finite difference method is used to calculate the difference between the nonreciprocal phase shifts of the two lowest-order modes and optimize the parameters. The proposed device may play an important role in integrated optical devices and optical communication systems

Automated genomic DNA purification options in agricultural applications using MagneSil paramagnetic particles

Science.gov (United States)

Bitner, Rex M.; Koller, Susan C.

2002-06-01

The automated high throughput purification of genomic DNA form plant materials can be performed using MagneSil paramagnetic particles on the Beckman-Coulter FX, BioMek 2000, and the Tecan Genesis robot. Similar automated methods are available for DNA purifications from animal blood. These methods eliminate organic extractions, lengthy incubations and cumbersome filter plates. The DNA is suitable for applications such as PCR and RAPD analysis. Methods are described for processing traditionally difficult samples such as those containing large amounts of polyphenolics or oils, while still maintaining a high level of DNA purity. The robotic protocols have ben optimized for agricultural applications such as marker assisted breeding, seed-quality testing, and SNP discovery and scoring. In addition to high yield purification of DNA from plant samples or animal blood, the use of Promega's DNA-IQ purification system is also described. This method allows for the purification of a narrow range of DNA regardless of the amount of additional DNA that is present in the initial sample. This simultaneous Isolation and Quantification of DNA allows the DNA to be used directly in applications such as PCR, SNP analysis, and RAPD, without the need for separate quantitation of the DNA.

Novel Ethernet Based Optical Local Area Networks for Computer Interconnection

NARCIS (Netherlands)

Radovanovic, Igor; van Etten, Wim; Taniman, R.O.; Kleinkiskamp, Ronny

2003-01-01

In this paper we present new optical local area networks for fiber-to-the-desk application. Presented networks are expected to bring a solution for having optical fibers all the way to computers. To bring the overall implementation costs down we have based our networks on short-wavelength optical

Invisibility Cloaking Based on Geometrical Optics for Visible Light

Science.gov (United States)

Ichikawa, H.; Oura, M.; Taoda, T.

2013-06-01

Optical cloaking has been one of unattainable dreams and just a subject in fiction until recently. Several different approaches to cloaking have been proposed and demonstrated: stealth technology, active camouflage and transformation optics. The last one would be the most formal approach modifying electromagnetic field around an object to be cloaked with metamaterials. While cloaking based on transformation optics, though valid only at single frequency, is experimentally demonstrated in microwave region, its operation in visible spectrum is still distant from realisation mainly owing to difficulty in fabricating metamaterial structure whose elements are much smaller than wavelength of light. Here we show that achromatic optical cloaking in visible spectrum is possible with the mere principle based on geometrical optics. In combining a pair of polarising beam splitters and right-angled prisms, rays of light to be obstructed by an object can make a detour to an observer, while unobstructed rays go straight through two polarising beam splitters. What is observed eventually through the device is simply background image as if nothing exists in between.

NONLINEAR OPTICAL MOLECULAR CRYSTAL BASED ON 2,6-DIAMINOPYRIDINE: SYNTHESIS AND CHARACTERIZATION

Directory of Open Access Journals (Sweden)

I. M. Pavlovetc

2014-05-01

Full Text Available The paper deals with investigation of a new nonlinear optical material based on nonlinear optical chromophore (4-Nitrophenol and aminopyridine (2,6-Diaminopyridine. Calculation results are presented for molecular packing in the crystalline compound, based on the given components. According to these results the finite material must have a noncentrosymmetric lattice, which determines the presence of the second order nonlinear optical response. Investigations carried out in this work confirm these calculations. Results of experiments are given describing the co-crystallization of these components and the following re-crystallization of the obtained material. In order to get a monocrystal form, the optimal conditions for the synthesis of molecular crystals based on these components are determined. Sufficiently large homogeneous crystals are obtained, that gave the possibility to record their spectra in the visible and near infrared parts of the spectrum, to determine their nonlinear optical properties and the level of homogeneity. Their optical (optical transmission and optical laser damage threshold and nonlinear optical properties are presented. For observation and measurement of the nonlinear optical properties an installation was built which implements the comparative method for measurements of nonlinear optical properties. A potassium titanyl oxide phosphate crystal was used as a sample for comparison. Results are given for the conversion efficiency of the primary laser radiation in the second optical harmonic relative to the signal obtained on the potassium titanyl oxide phosphate crystal. Obtained results show that the molecular co-crystal based on 2,6-Diaminopyridine is a promising nonlinear optical material for generating the second optical harmonic on the Nd: YAG laser (532 nm.

Study of passive optical network monitoring based on non-OTDR

Science.gov (United States)

Li, Chuan-qi; Wang, Da-chi; Hu, Jin-lin

2014-03-01

Aiming at the defects of passive optical network (PON) monitoring based on optical time domain reflectometry (OTDR) technology, we research the non-OTDR monitoring technology. The coding scheme based on periodic encoder monitoring is discussed, and its limitation is analyzed. On this basis, the monitoring technology based on optical code division multiple access (OCDMA) is put forward. We analyze the feasibility of monitoring scheme based on PON of OCDMA, design a monitoring plan, and then use OptiSystem to simulate the design. The results of simulation and bit error rate (BER) analysis show that this monitoring technology can overcome the deficiencies of OTDR and distinguish the monitoring signals of different fiber branches clearly, which meets the demands for high beam split ratio of multi-user communication.

Research of detection depth for graphene-based optical sensor

Science.gov (United States)

Yang, Yong; Sun, Jialve; Liu, Lu; Zhu, Siwei; Yuan, Xiaocong

2018-03-01

Graphene-based optical sensors have been developed for research into the biological intercellular refractive index (RI) because they offer greater detection depths than those provided by the surface plasmon resonance technique. In this Letter, we propose an experimental approach for measurement of the detection depth in a graphene-based optical sensor system that uses transparent polydimethylsiloxane layers with different thicknesses. The experimental results show that detection depths of 2.5 μm and 3 μm can be achieved at wavelengths of 532 nm and 633 nm, respectively. These results prove that graphene-based optical sensors can realize long-range RI detection and are thus promising for use as tools in the biological cell detection field. Additionally, we analyze the factors that influence the detection depth and provide a feasible approach for detection depth control based on adjustment of the wavelength and the angle of incidence. We believe that this approach will be useful in RI tomography applications.

Challenges in paper-based fluorogenic optical sensing with smartphones

Science.gov (United States)

Ulep, Tiffany-Heather; Yoon, Jeong-Yeol

2018-05-01

Application of optically superior, tunable fluorescent nanotechnologies have long been demonstrated throughout many chemical and biological sensing applications. Combined with microfluidics technologies, i.e. on lab-on-a-chip platforms, such fluorescent nanotechnologies have often enabled extreme sensitivity, sometimes down to single molecule level. Within recent years there has been a peak interest in translating fluorescent nanotechnology onto paper-based platforms for chemical and biological sensing, as a simple, low-cost, disposable alternative to conventional silicone-based microfluidic substrates. On the other hand, smartphone integration as an optical detection system as well as user interface and data processing component has been widely attempted, serving as a gateway to on-board quantitative processing, enhanced mobility, and interconnectivity with informational networks. Smartphone sensing can be integrated to these paper-based fluorogenic assays towards demonstrating extreme sensitivity as well as ease-of-use and low-cost. However, with these emerging technologies there are always technical limitations that must be addressed; for example, paper's autofluorescence that perturbs fluorogenic sensing; smartphone flash's limitations in fluorescent excitation; smartphone camera's limitations in detecting narrow-band fluorescent emission, etc. In this review, physical optical setups, digital enhancement algorithms, and various fluorescent measurement techniques are discussed and pinpointed as areas of opportunities to further improve paper-based fluorogenic optical sensing with smartphones.

Demonstration of optical computing logics based on binary decision diagram.

Science.gov (United States)

Lin, Shiyun; Ishikawa, Yasuhiko; Wada, Kazumi

2012-01-16

Optical circuits are low power consumption and fast speed alternatives for the current information processing based on transistor circuits. However, because of no transistor function available in optics, the architecture for optical computing should be chosen that optics prefers. One of which is Binary Decision Diagram (BDD), where signal is processed by sending an optical signal from the root through a serial of switching nodes to the leaf (terminal). Speed of optical computing is limited by either transmission time of optical signals from the root to the leaf or switching time of a node. We have designed and experimentally demonstrated 1-bit and 2-bit adders based on the BDD architecture. The switching nodes are silicon ring resonators with a modulation depth of 10 dB and the states are changed by the plasma dispersion effect. The quality, Q of the rings designed is 1500, which allows fast transmission of signal, e.g., 1.3 ps calculated by a photon escaping time. A total processing time is thus analyzed to be ~9 ps for a 2-bit adder and would scales linearly with the number of bit. It is two orders of magnitude faster than the conventional CMOS circuitry, ~ns scale of delay. The presented results show the potential of fast speed optical computing circuits.

Modelisation et simulation d'un PON (Passive Optical Network) base ...

African Journals Online (AJOL)

English Title: Modeling and simulation of a PON (Passive Optical Network) Based on hybrid technology WDM/TDM. English Abstract. This development is part of dynamism of design for a model combining WDM and TDM multiplexing in the optical network of PON (Passive Optical Network) type, in order to satisfy the high bit ...

Last Advances in Silicon-Based Optical Biosensors

Directory of Open Access Journals (Sweden)

Adrián Fernández Gavela

2016-02-01

Full Text Available We review the most important achievements published in the last five years in the field of silicon-based optical biosensors. We focus specially on label-free optical biosensors and their implementation into lab-on-a-chip platforms, with an emphasis on developments demonstrating the capability of the devices for real bioanalytical applications. We report on novel transducers and materials, improvements of existing transducers, new and improved biofunctionalization procedures as well as the prospects for near future commercialization of these technologies.

Last Advances in Silicon-Based Optical Biosensors.

Science.gov (United States)

Fernández Gavela, Adrián; Grajales García, Daniel; Ramirez, Jhonattan C; Lechuga, Laura M

2016-02-24

We review the most important achievements published in the last five years in the field of silicon-based optical biosensors. We focus specially on label-free optical biosensors and their implementation into lab-on-a-chip platforms, with an emphasis on developments demonstrating the capability of the devices for real bioanalytical applications. We report on novel transducers and materials, improvements of existing transducers, new and improved biofunctionalization procedures as well as the prospects for near future commercialization of these technologies.

Reset Tree-Based Optical Fault Detection

Directory of Open Access Journals (Sweden)

Howon Kim

2013-05-01

Full Text Available In this paper, we present a new reset tree-based scheme to protect cryptographic hardware against optical fault injection attacks. As one of the most powerful invasive attacks on cryptographic hardware, optical fault attacks cause semiconductors to misbehave by injecting high-energy light into a decapped integrated circuit. The contaminated result from the affected chip is then used to reveal secret information, such as a key, from the cryptographic hardware. Since the advent of such attacks, various countermeasures have been proposed. Although most of these countermeasures are strong, there is still the possibility of attack. In this paper, we present a novel optical fault detection scheme that utilizes the buffers on a circuit’s reset signal tree as a fault detection sensor. To evaluate our proposal, we model radiation-induced currents into circuit components and perform a SPICE simulation. The proposed scheme is expected to be used as a supplemental security tool.

All-optical two-way relaying free-space optical communications for HAP-based broadband backhaul networks

Science.gov (United States)

Vu, Minh Q.; Nguyen, Nga T. T.; Pham, Hien T. T.; Dang, Ngoc T.

2018-03-01

High-altitude platforms (HAPs) are flexible, non-pollutant and cost-effective infrastructures compared to satellite or old terrestrial systems. They are being researched and developed widely in Europe, USA, Japan, Korea, and so on. However, the current limited data rates and the overload of radio frequency (RF) spectrum are problems which the developers for HAPs are confronting because most of them use RF links to communicate with the ground stations (GSs) or each other. In this paper, we propose an all-optical two-way half-duplex relaying free-space optical (FSO) communication for HAP-based backhaul networks, which connect the base transceiver station (BTS) to the core network (CN) via a single HAP. Our proposed backhaul solution can be deployed quickly and flexibly for disaster relief and for serving users in both urban environments and remote areas. The key subsystem of HAP is an optical regenerate-and-forward (ORF) equipped with an optical hard-limiter (OHL) and an optical XOR gate to perform all-optical processing and help mitigate the background noise. In addition, two-way half-duplex relaying can be provided thanks to the use of network coding scheme. The closed-form expression for the bit error rate (BER) of our proposed system under the effect of path loss, atmospheric turbulence, and noise induced by the background light is formulated. The numerical results are demonstrated to prove the feasibility of our proposed system with the verification by using Monte-Carlo (M-C) simulations.

An optical CDMA system based on chaotic sequences

Science.gov (United States)

Liu, Xiao-lei; En, De; Wang, Li-guo

2014-03-01

In this paper, a coherent asynchronous optical code division multiple access (OCDMA) system is proposed, whose encoder/decoder is an all-optical generator. This all-optical generator can generate analog and bipolar chaotic sequences satisfying the logistic maps. The formula of bit error rate (BER) is derived, and the relationship of BER and the number of simultaneous transmissions is analyzed. Due to the good property of correlation, this coherent OCDMA system based on these bipolar chaotic sequences can support a large number of simultaneous users, which shows that these chaotic sequences are suitable for asynchronous OCDMA system.

Ultrafast all-optical clock recovery based on phase-only linear optical filtering

DEFF Research Database (Denmark)

Maram, Reza; Kong, Deming; Galili, Michael

2014-01-01

We report on a novel technique for all-optical clock recovery from RZ OOK data based on phase-only filtering, significantly enhancing the recovered clock quality and energy-efficiency compared to the use of a Fabry-Perot filter....

The use of a biologic topical haemostatic agent (TachoSil(®)) for the prevention of postoperative bleeding in patients on antithrombotic therapy undergoing thyroid surgery: A randomised controlled pilot trial.

Science.gov (United States)

Erdas, Enrico; Medas, Fabio; Podda, Francesco; Furcas, Silvia; Pisano, Giuseppe; Nicolosi, Angelo; Calò, Pietro Giorgio

2015-08-01

Anticoagulants and antiplatelet agents are well-known risk factors for post-operative bleeding. The aim of this prospective, randomized pilot study was to evaluate the effectiveness of a topical haemostatic agent, namely TachoSil, for the prevention of postoperative bleeding in patients on antithrombotic therapy undergoing thyroidectomy. Perioperative management and some distinctive aspects of cervical haematomas were also discussed. Between January 2012 and May 2014, all patients taking vitamin K antagonists (VKAs) or acetyl salicylic acid (ASA) scheduled for total thyroidectomy were enrolled and randomly allocated to group 1 (standard haemostasis) and group 2 (standard haemostasis + TachoSil). Antithrombotic drugs were always suspended prior to surgery and, when indicated, replaced by bridging anticoagulation with low-molecular-weight heparin. The primary endpoint was the incidence of postoperative cervical haematomas. A total of 70 patients were included in the study, representing 8.5% (70/820) of all patients who underwent thyroidectomies in the same period. The overall rate of post-operative cervical haematoma was 7.1% (5/70) and reached 14.8% (4/27) in patients on VKA therapy. All but one occurred more than 24 h after surgery (32nd hour, 8th, 10th, and 13th days). Group 1 (37 patients) and group 2 (33 patients) were well-matched according to clinical and demographic features. Postoperative haematoma was observed in 2/37 patients (5.4%) recruited in the Group 1 and 3/33 patients (9.1%) recruited in the Group 2 (P = 0.661). Patients taking antithrombotic drugs represent a major problem in thyroid surgery. The incidence of bleeding after thyroidectomy is significantly high and the use of TachoSil do not seem effective in preventing its occurrence. However, larger multicenter study is needed to confirm these results. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Semiconductor optical amplifier-based all-optical gates for high-speed optical processing

DEFF Research Database (Denmark)

Stubkjær, Kristian

2000-01-01

Semiconductor optical amplifiers are useful building blocks for all-optical gates as wavelength converters and OTDM demultiplexers. The paper reviews the progress from simple gates using cross-gain modulation and four-wave mixing to the integrated interferometric gates using cross-phase modulation....... These gates are very efficient for high-speed signal processing and open up interesting new areas, such as all-optical regeneration and high-speed all-optical logic functions...

Terahertz bandwidth all-optical Hilbert transformers based on long-period gratings.

Science.gov (United States)

Ashrafi, Reza; Azaña, José

2012-07-01

A novel, all-optical design for implementing terahertz (THz) bandwidth real-time Hilbert transformers is proposed and numerically demonstrated. An all-optical Hilbert transformer can be implemented using a uniform-period long-period grating (LPG) with a properly designed amplitude-only grating apodization profile, incorporating a single π-phase shift in the middle of the grating length. The designed LPG-based Hilbert transformers can be practically implemented using either fiber-optic or integrated-waveguide technologies. As a generalization, photonic fractional Hilbert transformers are also designed based on the same optical platform. In this general case, the resulting LPGs have multiple π-phase shifts along the grating length. Our numerical simulations confirm that all-optical Hilbert transformers capable of processing arbitrary optical signals with bandwidths well in the THz range can be implemented using feasible fiber/waveguide LPG designs.

Bridge SHM system based on fiber optical sensing technology

Science.gov (United States)

Li, Sheng; Fan, Dian; Fu, Jiang-hua; Huang, Xing; Jiang, De-sheng

2015-09-01

The latest progress of our lab in recent 10 years on the area of bridge structural health monitoring (SHM) based on optical fiber sensing technology is introduced. Firstly, in the part of sensing technology, optical fiber force test-ring, optical fiber vibration sensor, optical fiber smart cable, optical fiber prestressing loss monitoring method and optical fiber continuous curve mode inspection system are developed, which not only rich the sensor types, but also provides new monitoring means that are needed for the bridge health monitoring system. Secondly, in the optical fiber sensing network and computer system platform, the monitoring system architecture model is designed to effectively meet the integration scale and effect requirement of engineering application, especially the bridge expert system proposed integration of sensing information and informatization manual inspection to realize the mode of multi index intelligence and practical monitoring, diagnosis and evaluation. Finally, the Jingyue bridge monitoring system as the representative, the research on the technology of engineering applications are given.

Twistacene contained molecule for optical nonlinearity: Excited-state based negative refraction and optical limiting

Science.gov (United States)

Wu, Xingzhi; Xiao, Jinchong; Sun, Ru; Jia, Jidong; Yang, Junyi; Ao, Guanghong; Shi, Guang; Wang, Yuxiao; Zhang, Xueru; Song, Yinglin

2018-06-01

Spindle-type molecules containing twisted acenes (PyBTA-1 &PyBTA-2) are designed, synthesized characterized. Picosecond Z-scan experiments under 532 nm show reverse saturable absorption and negative nonlinear refraction, indicating large third-order optical nonlinearity in PyBTA-1. The mechanism of the optical nonlinearity is investigated and the results show that the nonlinear absorption and refraction in PyBTA-1 originates from a charge transfer (CT) state. Furthermore, relatively long lifetime and absorptive cross section of the CT state are measured. Based on the excited state absorption in PyBTA-1, strong optical limiting with ∼0.3 J/cm2 thresholds are obtained when excited by picoseconds and nanoseconds pulses. The findings on nonlinear optics suggest PyBTA-1 a promising material of all optical modulation and laser protection, which enrich the potential applications of these spindle-type molecules. Comparing to the previously reported spindle-type molecules with analogous structures, the introduction of ICT in PyBTA-1 &PyBTA-2 dramatically decreases the two-photon absorption while enhances the nonlinear refraction. The results could be used to selectively tailor the optical nonlinearity in such kind of compounds.

Chemical Sensors Based on Optical Ring Resonators

Science.gov (United States)

Homer, Margie; Manfreda, Allison; Mansour, Kamjou; Lin, Ying; Ksendzov, Alexander

2005-01-01

Chemical sensors based on optical ring resonators are undergoing development. A ring resonator according to this concept is a closed-circuit dielectric optical waveguide. The outermost layer of this waveguide, analogous to the optical cladding layer on an optical fiber, is a made of a polymer that (1) has an index of refraction lower than that of the waveguide core and (2) absorbs chemicals from the surrounding air. The index of refraction of the polymer changes with the concentration of absorbed chemical( s). The resonator is designed to operate with relatively strong evanescent-wave coupling between the outer polymer layer and the electromagnetic field propagating along the waveguide core. By virtue of this coupling, the chemically induced change in index of refraction of the polymer causes a measurable shift in the resonance peaks of the ring. In a prototype that has been used to demonstrate the feasibility of this sensor concept, the ring resonator is a dielectric optical waveguide laid out along a closed path resembling a racetrack (see Figure 1). The prototype was fabricated on a silicon substrate by use of standard techniques of thermal oxidation, chemical vapor deposition, photolithography, etching, and spin coating. The prototype resonator waveguide features an inner cladding of SiO2, a core of SixNy, and a chemical-sensing outer cladding of ethyl cellulose. In addition to the ring Chemical sensors based on optical ring resonators are undergoing development. A ring resonator according to this concept is a closed-circuit dielectric optical waveguide. The outermost layer of this waveguide, analogous to the optical cladding layer on an optical fiber, is a made of a polymer that (1) has an index of refraction lower than that of the waveguide core and (2) absorbs chemicals from the surrounding air. The index of refraction of the polymer changes with the concentration of absorbed chemical( s). The resonator is designed to operate with relatively strong

Fluorescence-Based Multiplex Protein Detection Using Optically Encoded Microbeads

Directory of Open Access Journals (Sweden)

Dae Hong Jeong

2012-03-01

Full Text Available Potential utilization of proteins for early detection and diagnosis of various diseases has drawn considerable interest in the development of protein-based multiplex detection techniques. Among the various techniques for high-throughput protein screening, optically-encoded beads combined with fluorescence-based target monitoring have great advantages over the planar array-based multiplexing assays. This review discusses recent developments of analytical methods of screening protein molecules on microbead-based platforms. These include various strategies such as barcoded microbeads, molecular beacon-based techniques, and surface-enhanced Raman scattering-based techniques. Their applications for label-free protein detection are also addressed. Especially, the optically-encoded beads such as multilayer fluorescence beads and SERS-encoded beads are successful for generating a large number of coding.

Movable Thomson scattering system based on optical fiber (TS-probe)

International Nuclear Information System (INIS)

Narihara, K.; Hayashi, H.

2009-01-01

This paper proposes a movable compact Thomson scattering (TS) system based on optical fibers (TS-probe). A TS-probe consists of a probe head, optical fiber, a laser-diode, polychromators and lock-in amplifiers. A laser beam optics and light collection optics are mounted rigidly on a probe head with a fixed scattering position. Laser light and scattered light are transmitted by flexible optical fibers, enabling us to move the TS-prove head freely during plasma discharge. The light signal scattered from an amplitude-modulated laser is detected against the plasma light based on the principle of the lock-in amplifier. With a modulated laser power of 300W, the scattered signal from a sheet plasma of 15 mm depth and n e -10 19 m -3 will be measured with 10% accuracy by setting the integrating time to 0.1 s. The TS-probe head is like a 1/20 model of the currently operating LHD-TS. (author)

Highly Efficient Coherent Optical Memory Based on Electromagnetically Induced Transparency

Science.gov (United States)

Hsiao, Ya-Fen; Tsai, Pin-Ju; Chen, Hung-Shiue; Lin, Sheng-Xiang; Hung, Chih-Chiao; Lee, Chih-Hsi; Chen, Yi-Hsin; Chen, Yong-Fan; Yu, Ite A.; Chen, Ying-Cheng

2018-05-01

Quantum memory is an important component in the long-distance quantum communication based on the quantum repeater protocol. To outperform the direct transmission of photons with quantum repeaters, it is crucial to develop quantum memories with high fidelity, high efficiency and a long storage time. Here, we achieve a storage efficiency of 92.0 (1.5)% for a coherent optical memory based on the electromagnetically induced transparency scheme in optically dense cold atomic media. We also obtain a useful time-bandwidth product of 1200, considering only storage where the retrieval efficiency remains above 50%. Both are the best record to date in all kinds of schemes for the realization of optical memory. Our work significantly advances the pursuit of a high-performance optical memory and should have important applications in quantum information science.

Combined optic system based on polycapillary X-ray optics and single-bounce monocapillary optics for focusing X-rays from a conventional laboratory X-ray source

Energy Technology Data Exchange (ETDEWEB)

Sun, Xuepeng; Liu, Zhiguo [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Sun, Tianxi, E-mail: stx@bnu.edu.cn [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Yi, Longtao; Sun, Weiyuan; Li, Fangzuo; Jiang, Bowen [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Ma, Yongzhong [Center for Disease Control and Prevention of Beijing, Beijing 100013 (China); Ding, Xunliang [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China)

2015-12-01

Two combined optic systems based on polycapillary X-ray optics and single-bounce monocapillary optics (SBMO) were designed for focusing the X-rays from a conventional laboratory X-ray source. One was based on a polycapillary focusing X-ray lens (PFXRL) and a single-bounce ellipsoidal capillary (SBEC), in which the output focal spot with the size of tens of micrometers of the PFXRL was used as the “virtual” X-ray source for the SBEC. The other system was based on a polycapillary parallel X-ray lens (PPXRL) and a single-bounce parabolic capillary (SBPC), in which the PPXRL transformed the divergent X-ray beam from an X-ray source into a quasi-parallel X-ray beam with the divergence of sever milliradians as the incident illumination of the SBPC. The experiment results showed that the combined optic systems based on PFXRL and SBEC with a Mo rotating anode X-ray generator with the focal spot with a diameter of 300 μm could obtain a focal spot with the total gain of 14,300 and focal spot size of 37.4 μm, and the combined optic systems based on PPXRL and SBPC with the same X-ray source mentioned above could acquire a focal spot with the total gain of 580 and focal spot size of 58.3 μm, respectively. The two combined optic systems have potential applications in micro X-ray diffraction, micro X-ray fluorescence, micro X-ray absorption near edge structure, full field X-ray microscopes and so on.

Une géographie de la coopération universitaire France-Brésil, analyse des accords Capes-Cofecub

Directory of Open Access Journals (Sweden)

Hervé Théry

2011-04-01

Full Text Available L’analyse et la cartographie des 750 accords de coopération universitaire entre la France et le Brésil fait apparaître, au-delà de l’effet évident des hiérarchies urbaines (les villes les plus peuplées sont aussi les grands centres universitaires, des spécialisations qui renvoient à des traditions locales et la résultante des réseaux des équipes candidates.The analysis and mapping of the 750 agreements for academic cooperation between France and Brazil shows, beyond the obvious effect of urban hierarchies (the most populous cities are also the major academic centers, specializations wich refer to local traditions and the result of networking made by the candidate teams.

38.2-Gb/s Optical-Wireless Transmission in 75-110 GHz Based on Electrical OFDM with Optical Comb Expansion

DEFF Research Database (Denmark)

Deng, Lei; Pang, Xiaodan; Beltrán, Marta

2012-01-01

We demonstrate scalable optical comb- and heterodyning-based generation, optical and 1.3-m wireless transmission, and electrical heterodyne detection of multiband OFDM up to 38.2 Gb/s occupying 14.4-GHz RF bandwidth, for high-capacity optical-wireless links in 75-110 GHz....

Raman Probe Based on Optically-Poled Double-Core Fiber

DEFF Research Database (Denmark)

Brunetti, Anna Chiara; Margulis, Walter; Rottwitt, Karsten

2012-01-01

A Raman probe based on an optically-poled double-core fiber. In-fiber SHG allows for Raman spectroscopy of DMSO at 532nm when illuminating the fiber with 1064nm light. The fiber structure provides independent excitation and collection paths.......A Raman probe based on an optically-poled double-core fiber. In-fiber SHG allows for Raman spectroscopy of DMSO at 532nm when illuminating the fiber with 1064nm light. The fiber structure provides independent excitation and collection paths....

OPTICALLY BASED CHARGE INJECTION SYSTEM FOR IONIZATION DETECTORS

International Nuclear Information System (INIS)

CHEN, H.; CITTERIO, M.; LANNI, F.; LEITE, M.A.L.; RADEKA, V.; RESCIA, S.; TAKAI, H.

2001-01-01

An optically coupled charge injection system for ionization based radiation detectors which allows a test charge to be injected without the creation of ground loops has been developed. An ionization like signal from an external source is brought into the detector through an optical fiber and injected into the electrodes by means of a photodiode. As an application example, crosstalk measurements on a liquid Argon electromagnetic calorimeter readout electrodes were performed

STUDY ON HIGH RESOLUTION MEMBRANE-BASED DIFFRACTIVE OPTICAL IMAGING ON GEOSTATIONARY ORBIT

Directory of Open Access Journals (Sweden)

J. Jiao

2017-05-01

Full Text Available Diffractive optical imaging technology provides a new way to realize high resolution earth observation on geostationary orbit. There are a lot of benefits to use the membrane-based diffractive optical element in ultra-large aperture optical imaging system, including loose tolerance, light weight, easy folding and unfolding, which make it easy to realize high resolution earth observation on geostationary orbit. The implementation of this technology also faces some challenges, including the configuration of the diffractive primary lens, the development of high diffraction efficiency membrane-based diffractive optical elements, and the correction of the chromatic aberration of the diffractive optical elements. Aiming at the configuration of the diffractive primary lens, the “6+1” petal-type unfold scheme is proposed, which consider the compression ratio, the blocking rate and the development complexity. For high diffraction efficiency membrane-based diffractive optical element, a self-collimating method is proposed. The diffraction efficiency is more than 90 % of the theoretical value. For the chromatic aberration correction problem, an optimization method based on schupmann is proposed to make the imaging spectral bandwidth in visible light band reach 100 nm. The above conclusions have reference significance for the development of ultra-large aperture diffractive optical imaging system.

Study on High Resolution Membrane-Based Diffractive Optical Imaging on Geostationary Orbit

Science.gov (United States)

Jiao, J.; Wang, B.; Wang, C.; Zhang, Y.; Jin, J.; Liu, Z.; Su, Y.; Ruan, N.

2017-05-01

Diffractive optical imaging technology provides a new way to realize high resolution earth observation on geostationary orbit. There are a lot of benefits to use the membrane-based diffractive optical element in ultra-large aperture optical imaging system, including loose tolerance, light weight, easy folding and unfolding, which make it easy to realize high resolution earth observation on geostationary orbit. The implementation of this technology also faces some challenges, including the configuration of the diffractive primary lens, the development of high diffraction efficiency membrane-based diffractive optical elements, and the correction of the chromatic aberration of the diffractive optical elements. Aiming at the configuration of the diffractive primary lens, the "6+1" petal-type unfold scheme is proposed, which consider the compression ratio, the blocking rate and the development complexity. For high diffraction efficiency membrane-based diffractive optical element, a self-collimating method is proposed. The diffraction efficiency is more than 90 % of the theoretical value. For the chromatic aberration correction problem, an optimization method based on schupmann is proposed to make the imaging spectral bandwidth in visible light band reach 100 nm. The above conclusions have reference significance for the development of ultra-large aperture diffractive optical imaging system.

Tamper indicating and sensing optical-based smart structures

International Nuclear Information System (INIS)

Sliva, P.; Anheier, N.C.; Gordon, N.R.; Simmons, K.L.; Stahl, K.A.; Undem, H.A.

1995-05-01

This paper has presented an overview of the type of optical-based structures that can be designed and constructed. These smart structures are capable of responding to their environment. The examples given represent a modest sampling of the complexity that can be achieved in both design and practice. Tamper-indicating containers and smart, sensing windows demonstrate just a few of the applications. We have shown that optical-based smart structures can be made multifunctional with the sensing built in. The next generation smart structure will combine the sensing functionality of these optical-based smart structures with other sensors such as piezoelectrics and electro-rheological fluids to not only be able to respond to the environment, but to adapt to it as well. An example of functionality in this regime would be a piezosensor that senses pressure changes (e.g., shock waves), which then causes an electro-rheological fluid to change viscosity. A fiber sensor located in or near the electro-rheological fluid senses the stiffness change and sends a signal through a feedback loop back to the piezosensor for additional adjustments to the electro-rheological fluid

Fiber optic-based biosensor

Science.gov (United States)

Ligler, Frances S.

1991-01-01

The NRL fiber optic biosensor is a device which measures the formation of a fluorescent complex at the surface of an optical fiber. Antibodies and DNA binding proteins provide the mechanism for recognizing an analyze and immobilizing a fluorescent complex on the fiber surface. The fiber optic biosensor is fast, sensitive, and permits analysis of hazardous materials remote from the instrumentation. The fiber optic biosensor is described in terms of the device configuration, chemistry for protein immobilization, and assay development. A lab version is being used for assay development and performance characterization while a portable device is under development. Antibodies coated on the fiber are stable for up to two years of storage prior to use. The fiber optic biosensor was used to measure concentration of toxins in the parts per billion (ng/ml) range in under a minute. Immunoassays for small molecules and whole bacteria are under development. Assays using DNA probes as the detection element can also be used with the fiber optic sensor, which is currently being developed to detect biological warfare agents, explosives, pathogens, and toxic materials which pollute the environment.

A novel optical transmission link with DHT-based constant envelope optical OFDM signal

Science.gov (United States)

Ma, Jianxin; Liang, Hao

2013-07-01

In this paper, we have proposed a novel optical OFDM transmission link that takes advantages of discrete Hartley Transform (DHT) and constant envelope (CE) modulation, obtaining DHT-based constant envelope optical OFDM. The numerical results show that this design achieves better performance when compared with conventional O-OFDM in terms of bit error rate (BER) and peak-to-average power ratio (PAPR). The impact of phase modulation index (PMI) on both PAPR and noise tolerance is investigated. Since the scheme has simplified design, it is believed to be a cost-effective in the practical implement.

Associations between overweight, obesity, health measures and need for recovery in office employees: a cross-sectional analysis

NARCIS (Netherlands)

van der Starre, R.E.; Coffeng, J.K.; Hendriksen, I.J.M.; van Mechelen, W.; Boot, C.R.L.

2013-01-01

Background: With both a high need for recovery (NFR) and overweight and obesity being a potential burden for organizations (e.g. productivity loss and sickness absence), the aim of this paper was to examine the associations between overweight and obesity and several other health measures and NFR in

Optical computation based on nonlinear total reflectional optical ...

Indian Academy of Sciences (India)

Optical computing; beam splitter; optical switch; polarized beams. ... main research direction called quantum information and quantum computation is .... above has several advantages: Firstly, it is easy to be integrated with appropriate.

Proton irradiation of liquid crystal based adaptive optical devices

International Nuclear Information System (INIS)

Buis, E.J.; Berkhout, G.C.G.; Love, G.D.; Kirby, A.K.; Taylor, J.M.; Hannemann, S.; Collon, M.J.

2012-01-01

To assess its radiation hardness, a liquid crystal based adaptive optical element has been irradiated using a 60 MeV proton beam. The device with the functionality of an optical beam steerer was characterised before, during and after the irradiation. A systematic set of measurements on the transmission and beam deflection angles was carried out. The measurements showed that the transmission decreased only marginally and that its optical performance degraded only after a very high proton fluence (10 10 p/cm 2 ). The device showed complete annealing in the functionality as a beam steerer, which leads to the conclusion that the liquid crystal technology for optical devices is not vulnerable to proton irradiation as expected in space.

Proton irradiation of liquid crystal based adaptive optical devices

Energy Technology Data Exchange (ETDEWEB)

Buis, E.J., E-mail: ernst-jan.buis@tno.nl [cosine Science and Computing BV, Niels Bohrweg 11, 2333 CA Leiden (Netherlands); Berkhout, G.C.G. [cosine Science and Computing BV, Niels Bohrweg 11, 2333 CA Leiden (Netherlands); Huygens Laboratory, Leiden University, P.O. Box 9504, 2300 RA Leiden (Netherlands); Love, G.D.; Kirby, A.K.; Taylor, J.M. [Department of Physics, Durham University, South Road, Durham DH1 3LE (United Kingdom); Hannemann, S.; Collon, M.J. [cosine Research BV, Niels Bohrweg 11, 2333 CA Leiden (Netherlands)

2012-01-01

To assess its radiation hardness, a liquid crystal based adaptive optical element has been irradiated using a 60 MeV proton beam. The device with the functionality of an optical beam steerer was characterised before, during and after the irradiation. A systematic set of measurements on the transmission and beam deflection angles was carried out. The measurements showed that the transmission decreased only marginally and that its optical performance degraded only after a very high proton fluence (10{sup 10}p/cm{sup 2}). The device showed complete annealing in the functionality as a beam steerer, which leads to the conclusion that the liquid crystal technology for optical devices is not vulnerable to proton irradiation as expected in space.

All-optical switching based on optical fibre long period gratings modified bacteriorhodopsin

Science.gov (United States)

Korposh, S.; James, S.; Partridge, M.; Sichka, M.; Tatam, R.

2018-05-01

All-optical switching using an optical fibre long-period gating (LPG) modified with bacteriorhodopsin (bR) is demonstrated. The switching process is based on the photo-induced RI change of bR, which in turn changes the phase matching conditions of the mode coupling by the LPG, leading to modulation of the propagating light. The effect was studied with an LPG immersed into a bR solution and with LPGs coated with the bR films, deposited onto the LPGs using the layer-by-layer electrostatic self-assembly (LbL) method. The dependence of the all-optical switching efficiency upon the concentration of the bR solution and on the grating period of the LPG was also studied. In addition, an in-fibre Mach-Zehnder interferometer (MZI) composed of a cascaded LPG pair separated by 30 mm and modified with bR was used to enhance the wavelength range of all-optical switching. The switching wavelength is determined by the grating period of the LPG. Switching efficiencies of 16% and 35% were observed when an LPG and an MZI were immersed into bR solutions, respectively. The switching time for devices coated with bR-films was within 1 s, 10 times faster than that observed for devices immersed into bR solution.

Optical three-step binary-logic-gate-based MSD arithmetic

Science.gov (United States)

Fyath, R. S.; Alsaffar, A. A. W.; Alam, M. S.

2003-11-01

A three-step modified signed-digit (MSD) adder is proposed which can be optically implmented using binary logic gates. The proposed scheme depends on encoding each MSD digits into a pair of binary digits using a two-state and multi-position based encoding scheme. The design algorithm depends on constructing the addition truth table of binary-coded MSD numbers and then using Karnaugh map to achieve output minimization. The functions associated with the optical binary logic gates are achieved by simply programming the decoding masks of an optical shadow-casting logic system.

Determination of phenolic acids and flavonoids in raw propolis by silica-supported ionic liquid-based matrix solid phase dispersion extraction high performance liquid chromatography-diode array detection.

Science.gov (United States)

Wang, Zhibing; Sun, Rui; Wang, Yuanpeng; Li, Na; Lei, Lei; Yang, Xiao; Yu, Aimin; Qiu, Fangping; Zhang, Hanqi

2014-10-15

The silica-supported ionic liquid (S-SIL) was prepared by impregnation and used as the dispersion adsorbent of matrix solid phase dispersion (MSPD) for the simultaneous extraction of eight phenolic acids and flavonoids, including caffeic acid, ferulic acid, morin, luteolin, quercetin, apigenin, chrysin, and kaempferide in raw propolis. High performance liquid chromatography with a Zorbax SB-C18 column (150mm×4.6mm, 3.5μm) was used for separation of the analytes. The mobile phase consisted of 0.2% phosphoric acid aqueous solution and acetonitrile and the flow rate of the mobile phase was 0.5mL/min. The experimental conditions for silica-supported ionic liquid-based matrix solid phase dispersion (S-SIL-based MSPD) were optimized. S-SIL containing 10% [C6MIM]Cl was used as dispersant, 20mL of n-hexane as washing solvent and 15mL of methanol as elution solvent. The ratio of S-SIL to sample was selected to be 4:1. The standard curves showed good linear relationship (r>0.9995). The limits of detection and quantification were in the range of 5.8-22.2ngmL(-1) and 19.2-74.0ngmL(-1), respectively. The relative standard deviations (RSDs) of intra-day and inter-day determination were lower than 8.80% and 11.19%, respectively. The recoveries were between 65.51% and 92.32% with RSDs lower than 8.95%. Compared with ultrasound-assisted extraction (UAE) and soxhlet extraction, the present method consumed less sample, organic solvent, and extraction time, although the extraction yields obtained by S-SIL-based MSPD are slightly lower than those obtained by UAE. Copyright © 2014 Elsevier B.V. All rights reserved.

Desempenho de escolares com dislexia do desenvolvimento em tarefas fonológicas e silábicas Performance of students with developmental dyslexia in phonological and syllabic tasks

Directory of Open Access Journals (Sweden)

Giseli Donadon Germano

2009-06-01

Full Text Available OBJETIVO: caracterizar o desempenho em tarefas fonológicas e silábicas de escolares com dislexia do desenvolvimento e comparar estes achados com o desempenho de discentes com bom desempenho escolar. MÉTODOS: participaram do estudo 26 alunos de oito a 12 anos de idade, de ambos os sexos, de 2ª. a 4ª. séries do Ensino Fundamental municipal na cidade de Marilia-SP, divididas em GI: composto por 13 escolares com dislexia atendidos no Centro de Estudos da Educação e Saúde - CEES/UNESP e GII: composto por 13 alunos com bom desempenho acadêmico, pareados segundo sexo, idade e escolaridade com o GI. Como procedimento foi utilizada a Prova de Consciência Fonológica - Instrumento de Avaliação Seqüencial - CONFIAS. Os resultados foram analisados estatisticamente pelo Teste Mann-Whitney (comparação entre os grupos e Teste dos Postos Sinalizados-Wilcoxon (comparação entre as variáveis. RESULTADOS: os resultados evidenciaram diferença estatisticamente significante, sugerindo melhor desempenho do GII em relação ao GI quanto às tarefas fonêmicas e silábicas. O GI apresentou diferença estatisticamente significativa nas tarefas silábicas e fonêmicas, com melhor desempenho nas primeiras. Entre os escolares do GII não houve grande diferença estatística entre tarefas silábicas, apenas entre tarefas fonêmicas. CONCLUSÃO: o estudo concluiu que escolares com dislexia do desenvolvimento apresentam dificuldades quanto à identificação de rima e produção de palavras com o som dado, apontando para um déficit em acessar os códigos e as representações fonológicas.PURPOSE: to characterize and to compare the performance in phonological and syllabic tasks of developmental dyslexia to good readers. METHODS: twenty-six students participated, with age varying between 8 and 12 years, both genders, of 2nd and 4th grades of the municipal elementary education of the city of Marília-SP. They were divided into GI: 13 developmental dyslexic

Contrast-based sensorless adaptive optics for retinal imaging.

Science.gov (United States)

Zhou, Xiaolin; Bedggood, Phillip; Bui, Bang; Nguyen, Christine T O; He, Zheng; Metha, Andrew

2015-09-01

Conventional adaptive optics ophthalmoscopes use wavefront sensing methods to characterize ocular aberrations for real-time correction. However, there are important situations in which the wavefront sensing step is susceptible to difficulties that affect the accuracy of the correction. To circumvent these, wavefront sensorless adaptive optics (or non-wavefront sensing AO; NS-AO) imaging has recently been developed and has been applied to point-scanning based retinal imaging modalities. In this study we show, for the first time, contrast-based NS-AO ophthalmoscopy for full-frame in vivo imaging of human and animal eyes. We suggest a robust image quality metric that could be used for any imaging modality, and test its performance against other metrics using (physical) model eyes.

All-optical optoacoustic microscope based on wideband pulse interferometry.

Science.gov (United States)

Wissmeyer, Georg; Soliman, Dominik; Shnaiderman, Rami; Rosenthal, Amir; Ntziachristos, Vasilis

2016-05-01

Optical and optoacoustic (photoacoustic) microscopy have been recently joined in hybrid implementations that resolve extended tissue contrast compared to each modality alone. Nevertheless, the application of the hybrid technique is limited by the requirement to combine an optical objective with ultrasound detection collecting signal from the same micro-volume. We present an all-optical optoacoustic microscope based on a pi-phase-shifted fiber Bragg grating (π-FBG) with coherence-restored pulsed interferometry (CRPI) used as the interrogation method. The sensor offers an ultra-small footprint and achieved higher sensitivity over piezoelectric transducers of similar size. We characterize the spectral bandwidth of the ultrasound detector and interrogate the imaging performance on phantoms and tissues. We show the first optoacoustic images of biological specimen recorded with π-FBG sensors. We discuss the potential uses of π-FBG sensors based on CRPI.

Cinemática de la extensión jurásica vinculada a la Provincia Silícea Chon Aike, Santa Cruz, Argentina

OpenAIRE

Japas, Maria Silvia; Sruoga, Patricia; Kleiman, Laura Elena; Gayone, María Rosario; Maloberti, Alejandro L.; Comito, Oscar

2017-01-01

La Provincia Silícea Chon Aike, de vasta distribución en Patagonia, plataforma continental y Península Antártica, representa un megaevento volcánico ocurrido en tiempos jurásicos (188-152 Ma), cuyo emplazamiento estuvo controlado por una tectónica extensional. El análisis cinemático llevado a cabo a partir de fallas y zonas de cizalla frágil-dúctil en cuatro localidades (El Dorado- Monserrat, Norte de Cerro Vanguardia y El Fénix, en la comarca del Deseado; y Lago Ghío, en la Cordillera Patagó...

Acrylic and metal based Y-branch plastic optical fiber splitter with optical NOA63 polymer waveguide taper region

Science.gov (United States)

Ehsan, Abang Annuar; Shaari, Sahbudin; Rahman, Mohd Kamil Abd.

2011-01-01

We proposed a simple low-cost acrylic and metal-based Y-branch plastic optical fiber (POF) splitter which utilizes a low cost optical polymer glue NOA63 as the main waveguiding medium at the waveguide taper region. The device is composed of three sections: an input POF waveguide, a middle waveguide taper region and output POF waveguides. A desktop high speed CNC engraver is utilized to produce the mold inserts used for the optical devices. Short POF fibers are inserted into the engraved slots at the input and output ports. UV curable optical polymer glue NOA63 is injected into the waveguide taper region and cured. The assembling is completed when the top plate is positioned to enclose the device structure and connecting screws are secured. Both POF splitters have an average insertion loss of 7.8 dB, coupling ratio of 55: 45 and 57: 43 for the acrylic and metal-based splitters respectively. The devices have excess loss of 4.82 and 4.73 dB for the acrylic and metal-based splitters respectively.

Respiratory monitoring system based on fiber optic macro bending

Science.gov (United States)

Purnamaningsih, Retno Wigajatri; Widyakinanti, Astari; Dhia, Arika; Gumelar, Muhammad Raditya; Widianto, Arif; Randy, Muhammad; Soedibyo, Harry

2018-02-01

We proposed a respiratory monitoring system for living activities in human body based on fiber optic macro-bending for laboratory scale. The respiration sensor consists of a single-mode optical fiber and operating on a wavelength at around 1550 nm. The fiber optic was integrated into an elastic fabric placed on the chest and stomach of the monitored human subject. Deformations of the flexible textile involving deformations of the fiber optic bending curvature, which was proportional to the chest and stomach expansion. The deformation of the fiber was detected using photodetector and processed using microcontroller PIC18F14K50. The results showed that this system able to display various respiration pattern and rate for sleeping, and after walking and running activities in real time.

Centralized light-source optical access network based on polarization multiplexing.

Science.gov (United States)

Grassi, Fulvio; Mora, José; Ortega, Beatriz; Capmany, José

2010-03-01

This paper presents and demonstrates a centralized light source optical access network based on optical polarization multiplexing technique. By using two optical sources emitting light orthogonally polarized in the Central Node for downstream and upstream operations, the Remote Node is kept source-free. EVM values below telecommunication standard requirements have been measured experimentally when bidirectional digital signals have been transmitted over 10 km of SMF employing subcarrier multiplexing technique in the electrical domain.

Evaluation of polymer based third order nonlinear integrated optics devices

NARCIS (Netherlands)

Driessen, A.; Hoekstra, Hugo; Blom, F.C.; Horst, F.; Horst, F.; Krijnen, Gijsbertus J.M.; van Schoot, J.B.P.; van Schoot, J.B.P.; Lambeck, Paul; Popma, T.J.A.; Diemeer, Mart

Nonlinear polymers are promising materials for high speed active integrated optics devices. In this paper we evaluate the perspectives polymer based nonlinear optical devices can offer. Special attention is directed to the materials aspects. In our experimental work we applied mainly Akzo Nobel DANS

Plasmonic Nanomaterial-Based Optical Biosensing Platforms for Virus Detection

Directory of Open Access Journals (Sweden)

Jaewook Lee

2017-10-01

Full Text Available Plasmonic nanomaterials (P-NM are receiving attention due to their excellent properties, which include surface-enhanced Raman scattering (SERS, localized surface plasmon resonance (LSPR effects, plasmonic resonance energy transfer (PRET, and magneto optical (MO effects. To obtain such plasmonic properties, many nanomaterials have been developed, including metal nanoparticles (MNP, bimetallic nanoparticles (bMNP, MNP-decorated carbon nanotubes, (MNP-CNT, and MNP-modified graphene (MNP-GRP. These P-NMs may eventually be applied to optical biosensing systems due to their unique properties. Here, probe biomolecules, such as antibodies (Ab, probe DNA, and probe aptamers, were modified on the surface of plasmonic materials by chemical conjugation and thiol chemistry. The optical property change in the plasmonic nanomaterials was monitored based on the interaction between the probe biomolecules and target virus. After bioconjugation, several optical properties, including fluorescence, plasmonic absorbance, and diffraction angle, were changed to detect the target biomolecules. This review describes several P-NMs as potential candidates of optical sensing platforms and introduces various applications in the optical biosensing field.

Performance Study of optical Modulator based on electrooptic effect

International Nuclear Information System (INIS)

Palodiya, V; Raghuwanshi, S K

2016-01-01

In this paper, we have studied and derive performance parameter of highly integrated Lithium Niobate optical modulator. This is a chirp free modulator having low switching voltage and large bandwidth. For an external modulator in which travelling-wave electrodes length L imposed the modulating switching voltage, the product of V_π and L is fixed for a given electro optic material Lithium Niobate. We investigate to achieve a low V_π by both magnitude of the electro-optic coefficient for a wide variety of electro-optic materials. A Sellmeier equation for the extraordinary index of congruent lithium niobate is derived. For phase-matching, predictions are accmate for temperature between room temperature 250°C and wavelength ranging from 0.4 to 5µm. The Sellmeier equations predict more accmately refractive indices at long wavelengths. Theoretical result is confirmed by simulated results. We have analysed the various parameters such as switching voltage, device performance index, time constant, transmittance, cut-off frequency, 3-dB bandwidth, power absorption coefficient and transmission bit rate of Lithium Niobate optical Modulator based on electro -optic effect. (paper)

Universal Michelson Gires-Tournois interferometer optical interleaver based on digital signal processing.

Science.gov (United States)

Zhang, Juan; Yang, Xiaowei

2010-03-01

Optical interleavers based on Michelson Gires-Tournois interferometer (MGTI) with arbitrary cascaded reflectors for symmetrical or asymmetrical periodic frequency response with arbitrary duty cycles are defined as universal MGTI optical interleaver (UMGTIOI). It can significantly enhance flexibility and applicability of optical networks. A novel and simple method based on digital signal processing is proposed for the design of UMGTIOI. Different kinds of design examples are given to confirm effectiveness of the method.

O silêncio do estrangeiro: por uma tentativa da tradução da letra nos primeiros cadernos de Albert Camus

Directory of Open Access Journals (Sweden)

Albert Camus

2013-05-01

Full Text Available Partindo das teorias de Antoine Berman em A prova do estrangeiro, o presente artigo tem como objetivo introduzir uma discussão acerca da tradução dos primeiros cadernos de Albert Camus. A proposta de uma tradução da letra do original permite que se conserve a natureza própria dos cadernos que é de ser fragmentário, íntimo e inacabado, evitando, assim, processos como o de clarificação e o de enobrecimento. Essa postura tradutória se coaduna com a temática camusiana do silêncio e do estranhamento, que podemos observar ao longo de toda  sua obra, e particularmente nos cadernos.

Multisensor transducer based on a parallel fiber optic digital-to-analog converter

Directory of Open Access Journals (Sweden)

Grechishnikov Vladimir

2017-01-01

Full Text Available Considered possibility of creating a multisensory information converter (MSPI based on new fiber-optic functional element-digital-to-analog (DAC fiber optic converter. The use of DAC fiber-optic provides jamming immunity combined with low weight and cost of indicators .Because of that MSPI scheme was developed based on parallel DAC fiber-optic (Russian Federation Patent 157416. We came up with an equation for parallel DAC fiber-optic. An eleborate general mathematical model of the proposed converter. Developed a method for reducing conversion errors by placing the DAC transfer function between i and i + 1 ADC quantization levels. By using this model it allows you to obtain reliable information about the technical capabilities of a converter without the need for costly experiments.

A fast method for linear waves based on geometrical optics

NARCIS (Netherlands)

Stolk, C.C.

2009-01-01

We develop a fast method for solving the one-dimensional wave equation based on geometrical optics. From geometrical optics (e.g., Fourier integral operator theory or WKB approximation) it is known that high-frequency waves split into forward and backward propagating parts, each propagating with the

3 x 3 free-space optical router based on crossbar network and its control algorithm

Science.gov (United States)

Hou, Peipei; Sun, Jianfeng; Yu, Zhou; Lu, Wei; Wang, Lijuan; Liu, Liren

2015-08-01

A 3 × 3 free-space optical router, which comprises optical switches and polarizing beam splitter (PBS) and based on crossbar network, is proposed in this paper. A control algorithm for the 3 × 3 free-space optical router is also developed to achieve rapid control without rearrangement. In order to test the performance of the network based on 3 × 3 free-space optical router and that of the algorithm developed for the optical router, experiments are designed. The experiment results show that the interconnection network based on the 3 × 3 free-space optical router has low cross talk, fast connection speed. Under the control of the algorithm developed, a non-block and real free interconnection network is obtained based on the 3 × 3 free-space optical router we proposed.

Visibility-Based Hypothesis Testing Using Higher-Order Optical Interference

Science.gov (United States)

Jachura, Michał; Jarzyna, Marcin; Lipka, Michał; Wasilewski, Wojciech; Banaszek, Konrad

2018-03-01

Many quantum information protocols rely on optical interference to compare data sets with efficiency or security unattainable by classical means. Standard implementations exploit first-order coherence between signals whose preparation requires a shared phase reference. Here, we analyze and experimentally demonstrate the binary discrimination of visibility hypotheses based on higher-order interference for optical signals with a random relative phase. This provides a robust protocol implementation primitive when a phase lock is unavailable or impractical. With the primitive cost quantified by the total detected optical energy, optimal operation is typically reached in the few-photon regime.

Study on multiple-hops performance of MOOC sequences-based optical labels for OPS networks

Science.gov (United States)

Zhang, Chongfu; Qiu, Kun; Ma, Chunli

2009-11-01

In this paper, we utilize a new study method that is under independent case of multiple optical orthogonal codes to derive the probability function of MOOCS-OPS networks, discuss the performance characteristics for a variety of parameters, and compare some characteristics of the system employed by single optical orthogonal code or multiple optical orthogonal codes sequences-based optical labels. The performance of the system is also calculated, and our results verify that the method is effective. Additionally it is found that performance of MOOCS-OPS networks would, negatively, be worsened, compared with single optical orthogonal code-based optical label for optical packet switching (SOOC-OPS); however, MOOCS-OPS networks can greatly enlarge the scalability of optical packet switching networks.

Optical diagnostics based on elastic scattering: An update of clinical demonstrations with the Optical Biopsy System

Energy Technology Data Exchange (ETDEWEB)

Bigio, I.J.; Boyer, J.; Johnson, T.M.; Lacey, J.; Mourant, J.R. [Los Alamos National Lab., NM (United States); Conn, R. [Lovelace Medical Center, Albuquerque, NM (United States); Bohorfoush, A. [Wisconsin Medical School, Milwaukee, WI (United States)

1994-10-01

The Los Alamos National Laboratory has continued the development of the Optical Biopsy System (OBS) for noninvasive, real-time in situ diagnosis of tissue pathologies. Our clinical studies have expanded since the last Biomedical Optics Europe conference (Budapest, September 1993), and we report here on the latest results of clinical tests in gastrointestinal tract. The OBS invokes a unique approach to optical diagnosis of tissue pathologies based on the elastic scattering properties, over a wide range of wavelengths, of the tissue. The use of elastic scattering as the key to optical tissue diagnostics in the OBS is based on the fact that many tissue pathologies, including a majority of cancer forms, manifest significant architectural changes at the cellular and sub-cellular level. Since the cellular components that cause elastic scattering have dimensions typically on the order of visible to near-IR wavelengths, the elastic (Mie) scattering properties will be wavelength dependent. Thus, morphology and size changes can be expected to cause significant changes in an optical signature that is derived from the wavelength-dependence of elastic scattering. The OBS employs a small fiberoptic probe that is amenable to use with any endoscope or catheter, or to direct surface examination. The probe is designed to be used in optical contact with the tissue under examination and has separate illuminating and collecting fibers. Thus, the light that is collected and transmitted to the analyzing spectrometer must first scatter through a small volume of the tissue before entering the collection fiber(s). Consequently, the system is also sensitive to the optical absorption spectrum of the tissue, over an effective operating range of <300 to 950 nm, and such absorption adds valuable complexity to the scattering spectral signature.

Capillarity-based preparation system for optical colorimetric sensor arrays.

Science.gov (United States)

Luo, Xiao-Gang; Yi, Xin; Bu, Xiang-Nan; Hou, Chang-Jun; Huo, Dan-Qun; Yang, Mei; Fa, Huan-Bao; Lei, Jin-Can

2017-03-01

In recent years, optical colorimetric sensor arrays have demonstrated beneficial features, including rapid response, high selectivity, and high specificity; as a result, it has been extensively applied in food inspection and chemical studies, among other fields. There are instruments in the current market available for the preparation of an optical colorimetric sensor array, but it lacks the corresponding research of the preparation mechanism. Therefore, in connection with the main features of this kind of sensor array such as consistency, based on the preparation method of contact spotting, combined with a capillary fluid model, Washburn equation, Laplace equation, etc., this paper develops a diffusion model of an optical colorimetric sensor array during its preparation and sets up an optical colorimetric sensor array preparation system based on this diffusion model. Finally, this paper compares and evaluates the sensor arrays prepared by the system and prepared manually in three aspects such as the quality of array point, response of array, and response result, and the results show that the performance index of the sensor array prepared by a system under this diffusion model is better than that of the sensor array of manual spotting, which meets the needs of the experiment.

A nonlinear plasmonic waveguide based all-optical bidirectional switching

Science.gov (United States)

Bana, Xiaoqiang; Pang, Xingxing; Li, Xiaohui; Hu, Bin; Guo, Yixuan; Zheng, Hairong

2018-01-01

In this paper, an all-optical switching with a nanometer coupled ring resonator is demonstrated based on the nonlinear material. By adjusting the light intensity, we implement the resonance wavelength from 880 nm to 940 nm in the nonlinear material structure monocyclic. In the bidirectional switch structure, the center wavelength (i.e. 880 nm) is fixed. By changing the light intensity from I = 0 to I = 53 . 1 MW /cm2, the function of optical switching can be obtained. The results demonstrate that both the single-ring cavity and the T-shaped double-ring structure can realize the optical switching effect. This work takes advantage of the simple structure. The single-ring cavity plasmonic switches have many advantages, such as nanoscale size, low pumping light intensity, ultrafast response time (femtosecond level), etc. It is expected that the proposed all-optical integrated devices can be potentially applied in optical communication, signal processing, and signal sensing, etc.

Underwater Object Segmentation Based on Optical Features

Directory of Open Access Journals (Sweden)

Zhe Chen

2018-01-01

Full Text Available Underwater optical environments are seriously affected by various optical inputs, such as artificial light, sky light, and ambient scattered light. The latter two can block underwater object segmentation tasks, since they inhibit the emergence of objects of interest and distort image information, while artificial light can contribute to segmentation. Artificial light often focuses on the object of interest, and, therefore, we can initially identify the region of target objects if the collimation of artificial light is recognized. Based on this concept, we propose an optical feature extraction, calculation, and decision method to identify the collimated region of artificial light as a candidate object region. Then, the second phase employs a level set method to segment the objects of interest within the candidate region. This two-phase structure largely removes background noise and highlights the outline of underwater objects. We test the performance of the method with diverse underwater datasets, demonstrating that it outperforms previous methods.

Raman probes based on optically-poled double-clad fiber and coupler

DEFF Research Database (Denmark)

Brunetti, Anna Chiara; Margulis, Walter; Rottwitt, Karsten

2012-01-01

of a sample of dimethyl sulfoxide (DMSO), when illuminating the waveguide with 1064nm laser light. The Raman signal is collected in the inner cladding, from which it is retrieved with either a bulk dichroic mirror or a double-clad fiber coupler. The coupler allows for a substantial reduction of the fiber......Two fiber Raman probes are presented, one based on an optically-poled double-clad fiber and the second based on an optically-poled double-clad fiber coupler respectively. Optical poling of the core of the fiber allows for the generation of enough 532nm light to perform Raman spectroscopy...

Mobile device-based optical instruments for agriculture

Science.gov (United States)

Sumriddetchkajorn, Sarun

2013-05-01

Realizing that a current smart-mobile device such as a cell phone and a tablet can be considered as a pocket-size computer embedded with a built-in digital camera, this paper reviews and demonstrates on how a mobile device can be specifically functioned as a portable optical instrument for agricultural applications. The paper highlights several mobile device-based optical instruments designed for searching small pests, measuring illumination level, analyzing spectrum of light, identifying nitrogen status in the rice field, estimating chlorine in water, and determining ripeness level of the fruit. They are suitable for individual use as well as for small and medium enterprises.

Optical voice encryption based on digital holography.

Science.gov (United States)

Rajput, Sudheesh K; Matoba, Osamu

2017-11-15

We propose an optical voice encryption scheme based on digital holography (DH). An off-axis DH is employed to acquire voice information by obtaining phase retardation occurring in the object wave due to sound wave propagation. The acquired hologram, including voice information, is encrypted using optical image encryption. The DH reconstruction and decryption with all the correct parameters can retrieve an original voice. The scheme has the capability to record the human voice in holograms and encrypt it directly. These aspects make the scheme suitable for other security applications and help to use the voice as a potential security tool. We present experimental and some part of simulation results.

Parametric Covariance Model for Horizon-Based Optical Navigation

Science.gov (United States)

Hikes, Jacob; Liounis, Andrew J.; Christian, John A.

2016-01-01

This Note presents an entirely parametric version of the covariance for horizon-based optical navigation measurements. The covariance can be written as a function of only the spacecraft position, two sensor design parameters, the illumination direction, the size of the observed planet, the size of the lit arc to be used, and the total number of observed horizon points. As a result, one may now more clearly understand the sensitivity of horizon-based optical navigation performance as a function of these key design parameters, which is insight that was obscured in previous (and nonparametric) versions of the covariance. Finally, the new parametric covariance is shown to agree with both the nonparametric analytic covariance and results from a Monte Carlo analysis.

Multi-tap complex-coefficient incoherent microwave photonic filters based on optical single-sideband modulation and narrow band optical filtering.

Science.gov (United States)

Sagues, Mikel; García Olcina, Raimundo; Loayssa, Alayn; Sales, Salvador; Capmany, José

2008-01-07

We propose a novel scheme to implement tunable multi-tap complex coefficient filters based on optical single sideband modulation and narrow band optical filtering. A four tap filter is experimentally demonstrated to highlight the enhanced tuning performance provided by complex coefficients. Optical processing is performed by the use of a cascade of four phase-shifted fiber Bragg gratings specifically fabricated for this purpose.

Silicon-based optical integrated circuits for terabit communication networks

International Nuclear Information System (INIS)

Svidzinsky, K K

2003-01-01

A brief review is presented of the development of silicon-based optical integrated circuits used as components in modern all-optical communication networks with the terabit-per-second transmission capacity. The designs and technologies for manufacturing these circuits are described and the problems related to their development and application in WDM communication systems are considered. (special issue devoted to the memory of academician a m prokhorov)

Fiber Optic Surface Plasmon Resonance-Based Biosensor Technique: Fabrication, Advancement, and Application.

Science.gov (United States)

Liang, Gaoling; Luo, Zewei; Liu, Kunping; Wang, Yimin; Dai, Jianxiong; Duan, Yixiang

2016-05-03

Fiber optic-based biosensors with surface plasmon resonance (SPR) technology are advanced label-free optical biosensing methods. They have brought tremendous progress in the sensing of various chemical and biological species. This review summarizes four sensing configurations (prism, grating, waveguide, and fiber optic) with two ways, attenuated total reflection (ATR) and diffraction, to excite the surface plasmons. Meanwhile, the designs of different probes (U-bent, tapered, and other probes) are also described. Finally, four major types of biosensors, immunosensor, DNA biosensor, enzyme biosensor, and living cell biosensor, are discussed in detail for their sensing principles and applications. Future prospects of fiber optic-based SPR sensor technology are discussed.

New Ethernet Based Optically Transparent Network for Fiber-to-the-Desk Application

NARCIS (Netherlands)

Radovanovic, Igor; van Etten, Wim

2003-01-01

We present a new optical local area network architecture based on multimode optical fibers and components, short wavelength lasers and detectors and the widely used fast Ethernet protocol. The presented optically transparent network represent a novel approach in fiber-to-the-desk applications. It is

Optical microwave filter based on spectral slicing by use of arrayed waveguide gratings.

Science.gov (United States)

Pastor, Daniel; Ortega, Beatriz; Capmany, José; Sales, Salvador; Martinez, Alfonso; Muñoz, Pascual

2003-10-01

We have experimentally demonstrated a new optical signal processor based on the use of arrayed waveguide gratings. The structure exploits the concept of spectral slicing combined with the use of an optical dispersive medium. The approach presents increased flexibility from previous slicing-based structures in terms of tunability, reconfiguration, and apodization of the samples or coefficients of the transversal optical filter.

Optical force rectifiers based on PT-symmetric metasurfaces

Science.gov (United States)

Alaee, Rasoul; Gurlek, Burak; Christensen, Johan; Kadic, Muamer

2018-05-01

We introduce here the concept of optical force rectifier based on parity-time symmetric metasurfaces. Directly linked to the properties of non-Hermitian systems engineered by balanced loss and gain constituents, we show that light can exert asymmetric pulling or pushing forces on metasurfaces depending on the direction of the impinging light. This generates a complete force rectification in the vicinity of the exceptional point. Our findings have the potential to spark the design of applications in optical manipulation where the forces, strictly speaking, act unidirectionally.

SQoS based Planning using 4-regular Grid for Optical Fiber Metworks

DEFF Research Database (Denmark)

Riaz, Muhammad Tahir; Pedersen, Jens Myrup; Madsen, Ole Brun

optical fiber based network infrastructures. In the first step of SQoS based planning, this paper describes how 4-regular Grid structures can be implemented in the physical level of optical fiber network infrastructures. A systematic approach for implementing the Grid structure is presented. We used...

SQoS based Planning using 4-regular Grid for Optical Fiber Networks

DEFF Research Database (Denmark)

Riaz, Muhammad Tahir; Pedersen, Jens Myrup; Madsen, Ole Brun

2005-01-01

optical fiber based network infrastructures. In the first step of SQoS based planning, this paper describes how 4-regular Grid structures can be implemented in the physical level of optical fiber network infrastructures. A systematic approach for implementing the Grid structure is presented. We used...

MEMS-based non-rotatory circumferential scanning optical probe for endoscopic optical coherence tomography

Science.gov (United States)

Xu, Yingshun; Singh, Janak; Siang, Teo Hui; Ramakrishna, Kotlanka; Premchandran, C. S.; Sheng, Chen Wei; Kuan, Chuah Tong; Chen, Nanguang; Olivo, Malini C.; Sheppard, Colin J. R.

2007-07-01

In this paper, we present a non-rotatory circumferential scanning optical probe integrated with a MEMS scanner for in vivo endoscopic optical coherence tomography (OCT). OCT is an emerging optical imaging technique that allows high resolution cross-sectional imaging of tissue microstructure. To extend its usage to endoscopic applications, a miniaturized optical probe based on Microelectromechanical Systems (MEMS) fabrication techniques is currently desired. A 3D electrothermally actuated micromirror realized using micromachining single crystal silicon (SCS) process highlights its very large angular deflection, about 45 degree, with low driving voltage for safety consideration. The micromirror is integrated with a GRIN lens into a waterproof package which is compatible with requirements for minimally invasive endoscopic procedures. To implement circumferential scanning substantially for diagnosis on certain pathological conditions, such as Barret's esophagus, the micromirror is mounted on 90 degree to optical axis of GRIN lens. 4 Bimorph actuators that are connected to the mirror on one end via supporting beams and springs are selected in this micromirror design. When actuators of the micromirror are driven by 4 channels of sinusoidal waveforms with 90 degree phase differences, beam focused by a GRIN is redirected out of the endoscope by 45 degree tilting mirror plate and achieve circumferential scanning pattern. This novel driving method making full use of very large angular deflection capability of our micromirror is totally different from previously developed or developing micromotor-like rotatory MEMS device for circumferential scanning.

QKD-Based Secured Burst Integrity Design for Optical Burst Switched Networks

Science.gov (United States)

Balamurugan, A. M.; Sivasubramanian, A.; Parvathavarthini, B.

2016-03-01

The field of optical transmission has undergone numerous advancements and is still being researched mainly due to the fact that optical data transmission can be done at enormous speeds. It is quite evident that people prefer optical communication when it comes to large amount of data involving its transmission. The concept of switching in networks has matured enormously with several researches, architecture to implement and methods starting with Optical circuit switching to Optical Burst Switching. Optical burst switching is regarded as viable solution for switching bursts over networks but has several security vulnerabilities. However, this work exploited the security issues associated with Optical Burst Switching with respect to integrity of burst. This proposed Quantum Key based Secure Hash Algorithm (QKBSHA-512) with enhanced compression function design provides better avalanche effect over the conventional integrity algorithms.

Fiber Temperature Sensor Based on Micro-mechanical Membranes and Optical Interference Structure

International Nuclear Information System (INIS)

Liu Yueming; Tian Weijian; Hua Jing

2011-01-01

A novel fiber temperature sensor is presented theoretically and experimentally in this paper. Its working principle is based on Optical Fabry-Perot interference structure that is formed between a polished optical fiber end and micro-mechanical Bi-layered membranes. When ambient temperature is varying, Bi-layered membranes will be deflected and the length of Fabry-Perot cavity will be changed correspondingly. By detecting the reflecting optical intensity from the Fabry-Perot cavity, the ambient temperature can be measured. Using finite element software ANSYS, the sensor structure was optimized based on optical Interference theory and Bi-layered membranes thermal expansion theory, and theoretical characteristics was simulated by computer software. In the end, using optical fiber 2x2 coupler and photo-electrical detector, the fabricated sample sensor was tested successfully by experiment that demonstrating above theoretical analysis and simulation results. This sensor has some favorable features, such as: micro size owing to its micro-mechanical structure, high sensitivity owing to its working Fabry-Perot interference cavity structure, and optical integration character by using optical fiber techniques.

Refractive index sensor based on optical fiber end face using pulse reference-based compensation technique

Science.gov (United States)

Bian, Qiang; Song, Zhangqi; Zhang, Xueliang; Yu, Yang; Chen, Yuzhong

2018-03-01

We proposed a refractive index sensor based on optical fiber end face using pulse reference-based compensation technique. With good compensation effect of this compensation technique, the power fluctuation of light source, the change of optic components transmission loss and coupler splitting ratio can be compensated, which largely reduces the background noise. The refractive index resolutions can achieve 3.8 × 10-6 RIU and1.6 × 10-6 RIU in different refractive index regions.

Características anatômicas de mudas de morangueiro micropropagadas com diferentes fontes de silício Anatomical characteristics of the strawberry seedlings micropropagated using different sources of silicon

Directory of Open Access Journals (Sweden)

Francyane Tavares Braga

2009-02-01

Full Text Available O objetivo deste trabalho foi avaliar o efeito de diferentes fontes de silício, utilizadas na micropropagação, nas características anatômicas de mudas de morangueiro (Fragaria x ananassa. Foram utilizados propágulos da cv. Oso Grande cultivados em meio Murashige e Skoog (MS, acrescido de 30 gL-1 de sacarose, 6 gL-1 de ágar e 1 mgL-1 de 6-benzilaminopurina. Os tratamentos consistiram da adição ao meio MS dos silicatos de cálcio, de sódio e de potássio, na dosagem de 1 gL-1. O tratamento testemunha foi o meio MS sem fonte de silício. Odelineamento experimental foi o inteiramente ao acaso, com dez repetições. Os propágulos foram mantidos por 45 dias em sala de crescimento, em condições controladas. Avaliaram-se características fitotécnicas e anatômicas dos propágulos in vitro. Verificou-se que o aumento da massa de matéria fresca e seca dos propágulos de morangueiro ocorreu na presença de silicato de sódio. Asuplementação do meio de cultura com silício proporcionou maior teor de clorofila. Aadição de silicato de sódio ao meio MS resultou em aumento da espessura dos tecidos do limbo foliar e da deposição de cera epicuticular e na formação de depósito de silício nas células.The objective of this work was to evaluate the effect of different silicon sources, used in micropropagation, on the anatomical characteristics of strawberry's (Fragaria x ananassa seedlings. Propagules of cv.Oso Grande were cultivated on a Murashige and Skoog (MS medium containing 30 gL-1 of sucrose, 6 gL-1 of agar and 1mgL-1 of 6-benzylamino purine. The treatments consisted of calcium, sodium, or potassium silicates added to the MS medium, at the dosage of 1 gL-1. The MS medium without added silicon was the check treatment. The experimental design was completely randomized with ten replications. The propagules were maintained during 45days in a growth chamber, under controlled conditions. Developmental and anatomical characteristics of the

Noninvasive blood pressure measurement scheme based on optical fiber sensor

Science.gov (United States)

Liu, Xianxuan; Yuan, Xueguang; Zhang, Yangan

2016-10-01

Optical fiber sensing has many advantages, such as volume small, light quality, low loss, strong in anti-jamming. Since the invention of the optical fiber sensing technology in 1977, optical fiber sensing technology has been applied in the military, national defense, aerospace, industrial, medical and other fields in recent years, and made a great contribution to parameter measurement in the environment under the limited condition .With the rapid development of computer, network system, the intelligent optical fiber sensing technology, the sensor technology, the combination of computer and communication technology , the detection, diagnosis and analysis can be automatically and efficiently completed. In this work, we proposed a noninvasive blood pressure detection and analysis scheme which uses optical fiber sensor. Optical fiber sensing system mainly includes the light source, optical fiber, optical detector, optical modulator, the signal processing module and so on. wavelength optical signals were led into the optical fiber sensor and the signals reflected by the human body surface were detected. By comparing actual testing data with the data got by traditional way to measure the blood pressure we can establish models for predicting the blood pressure and achieve noninvasive blood pressure measurement by using spectrum analysis technology. Blood pressure measurement method based on optical fiber sensing system is faster and more convenient than traditional way, and it can get accurate analysis results in a shorter period of time than before, so it can efficiently reduce the time cost and manpower cost.

Optical Fiber Sensor Based on Localized Surface Plasmon Resonance Using Silver Nanoparticles Photodeposited on the Optical Fiber End

Directory of Open Access Journals (Sweden)

J. Gabriel Ortega-Mendoza

2014-10-01

Full Text Available This paper reports the implementation of an optical fiber sensor to measure the refractive index in aqueous media based on localized surface plasmon resonance (LSPR. We have used a novel technique known as photodeposition to immobilize silver nanoparticles on the optical fiber end. This technique has a simple instrumentation, involves laser light via an optical fiber and silver nanoparticles suspended in an aqueous medium. The optical sensor was assembled using a tungsten lamp as white light, a spectrometer, and an optical fiber with silver nanoparticles. The response of this sensor is such that the LSPR peak wavelength is linearly shifted to longer wavelengths as the refractive index is increased, showing a sensitivity of 67.6 nm/RIU. Experimental results are presented.

Optical Fiber Thermometer Based on Fiber Bragg Gratings

Science.gov (United States)

Rosli, Ekbal Bin; Mohd. Noor, Uzer

2018-03-01

Fiber Bragg grating has generated much interest in use as sensors to measure strain, temperature, and other physical parameters. It also the most common component used to develop this sensor with the advantages of simple, intrinsic sensing elements, electrically passive operation, EMI immunity, high sensitivity, compact size and potentially low cost [6]. This paper reports the design of an optical fiber thermometer based on fiber Bragg gratings. The system was developed for detecting temperature and strain by monitoring the shift of Bragg wavelength. The shifting of Bragg wavelength is used to indicate the temperature and strain due to the change in the surrounding temperature and strain. When the temperature and strain reach the exact wavelength level of the system, the temperature and strain value will display on the Arduino liquid crystal display (LCD). The optical fiber will provide the broadband light source and after passing the FBG the Bragg wavelength into the optical spectrum analyzer (OSA). The system is based on FBG as a physical quantity sensor. The temperatures measured is taken from the water bath and that of the strain is provided by amount of slotted mass used. The outcome of this project is to characterize the Bragg wavelength shifting from the fiber Bragg grating output. As the conclusion, this project provides an efficient optical fiber thermometer in measuring temperature and strain in order to replace the use of conventional electrical instruments.

Optical sensor in planar configuration based on multimode interference

Science.gov (United States)

Blahut, Marek

2017-08-01

In the paper a numerical analysis of optical sensors based on multimode interference in planar one-dimensional step-index configuration is presented. The structure consists in single-mode input and output waveguides and multimode waveguide which guide only few modes. Material parameters discussed refer to a SU8 polymer waveguide on SiO2 substrate. The optical system described will be designed to the analysis of biological substances.

Microresonator-Based Optical Frequency Combs: A Time Domain Perspective

Science.gov (United States)

2016-04-19

AFRL-AFOSR-VA-TR-2016-0165 (BRI) Microresonator-Based Optical Frequency Combs: A Time Domain Perspective Andrew Weiner PURDUE UNIVERSITY 401 SOUTH...Optical Frequency Combs: A Time Domain Perspective 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9550-12-1-0236 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data

Optical Fiber Sensing Based on Reflection Laser Spectroscopy

Directory of Open Access Journals (Sweden)

Gianluca Gagliardi

2010-03-01

Full Text Available An overview on high-resolution and fast interrogation of optical-fiber sensors relying on laser reflection spectroscopy is given. Fiber Bragg-gratings (FBGs and FBG resonators built in fibers of different types are used for strain, temperature and acceleration measurements using heterodyne-detection and optical frequency-locking techniques. Silica fiber-ring cavities are used for chemical sensing based on evanescent-wave spectroscopy. Various arrangements for signal recovery and noise reduction, as an extension of most typical spectroscopic techniques, are illustrated and results on detection performances are presented.

Speckle-based at-wavelength metrology of x-ray optics at Diamond Light Source

Science.gov (United States)

Wang, Hongchang; Zhou, Tunhe; Kashyap, Yogesh; Sawhney, Kawal

2017-08-01

To achieve high resolution and sensitivity on the nanometer scale, further development of X-ray optics is required. Although ex-situ metrology provides valuable information about X-ray optics, the ultimate performance of X-ray optics is critically dependent on the exact nature of the working conditions. Therefore, it is equally important to perform in-situ metrology at the optics' operating wavelength (`at-wavelength' metrology) to optimize the performance of X-ray optics and correct and minimize the collective distortions of the upstream beamline optics, e.g. monochromator, windows, etc. Speckle-based technique has been implemented and further improved at Diamond Light Source. We have demonstrated that the angular sensitivity for measuring the slope error of an optical surface can reach an accuracy of two nanoradians. The recent development of the speckle-based at-wavelength metrology techniques will be presented. Representative examples of the applications of the speckle-based technique will also be given - including optimization of X-ray mirrors and characterization of compound refraction lenses. Such a high-precision metrology technique will be extremely beneficial for the manufacture and in-situ alignment/optimization of X-ray mirrors for next-generation synchrotron beamlines.

Moire-Fringe-Based Fiber Optic Tiltmeter for Structural Health Monitoring

International Nuclear Information System (INIS)

Kim, Dae Hyun

2008-01-01

This paper presents a novel fiber optic tiltmeter system for the health monitoring of large-size structures. The system is composed of a sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy ratting, and low cost. In this paper, a prototype of the fiber optic tiltmeter system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. From an experimental test, the fiber optic tiltmeter is proven to be a prospective sensor for the monitoring of the tilting angle of civil structure with a good linearity. Finally, the test also successfully demonstrates the performance and the potential of the novel fiber optic tiltmeter system to monitor the health of civil infrastructures.

Moire-Fringe-Based Fiber Optic Tiltmeter for Structural Health Monitoring

Energy Technology Data Exchange (ETDEWEB)

Kim, Dae Hyun [Seoul National of Technology, Seoul (Korea, Republic of)

2008-04-15

This paper presents a novel fiber optic tiltmeter system for the health monitoring of large-size structures. The system is composed of a sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy ratting, and low cost. In this paper, a prototype of the fiber optic tiltmeter system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. From an experimental test, the fiber optic tiltmeter is proven to be a prospective sensor for the monitoring of the tilting angle of civil structure with a good linearity. Finally, the test also successfully demonstrates the performance and the potential of the novel fiber optic tiltmeter system to monitor the health of civil infrastructures.

Laser Tweezer Controlled Solid Immersion Lens for High Resolution Imaging in Microfluidic and Biological Samples

National Research Council Canada - National Science Library

Birkbeck, Aaron L; Zlatanovic, Sanja; Ozkan, Mihrimah; Esener, Sadik C

2005-01-01

...). Up to now, solid immersion lens imaging systems have relied upon cantilever-mounted SILs that are difficult to integrate into microfluidic systems and require an extra alignment step with external optics...

Optical Fiber Sensors Based on Nanoparticle-Embedded Coatings

Directory of Open Access Journals (Sweden)

Aitor Urrutia

2015-01-01

Full Text Available The use of nanoparticles (NPs in scientific applications has attracted the attention of many researchers in the last few years. The use of NPs can help researchers to tune the physical characteristics of the sensing coating (thickness, roughness, specific area, refractive index, etc. leading to enhanced sensors with response time or sensitivity better than traditional sensing coatings. Additionally, NPs also offer other special properties that depend on their nanometric size, and this is also a source of new sensing applications. This review focuses on the current status of research in the use of NPs within coatings in optical fiber sensing. Most used sensing principles in fiber optics are briefly described and classified into several groups: absorbance-based sensors, interferometric sensors, fluorescence-based sensors, fiber grating sensors, and resonance-based sensors, among others. For each sensor group, specific examples of the utilization of NP-embedded coatings in their sensing structure are reported.

Real-time all-optical OFDM transmission system based on time-domain optical fourier transformation

DEFF Research Database (Denmark)

Guan, Pengyu; Kong, Deming; Røge, Kasper Meldgaard

2014-01-01

We propose a novel simple all-optical OFDM transmission system based on time-domain OFT using time-lenses. A real-time 160 Gbit/s DPSK OFDM transmission with 16 decorrelated data subcarriers is successfully demonstrated over 100 km....

Retina image–based optic disc segmentation

Directory of Open Access Journals (Sweden)

Ching-Lin Wang

2016-05-01

Full Text Available The change of optic disc can be used to diagnose many eye diseases, such as glaucoma, diabetic retinopathy and macular degeneration. Moreover, retinal blood vessel pattern is unique for human beings even for identical twins. It is a highly stable pattern in biometric identification. Since optic disc is the beginning of the optic nerve and main blood vessels in retina, it can be used as a reference point of identification. Therefore, optic disc segmentation is an important technique for developing a human identity recognition system and eye disease diagnostic system. This article hence presents an optic disc segmentation method to extract the optic disc from a retina image. The experimental results show that the optic disc segmentation method can give impressive results in segmenting the optic disc from a retina image.

Investigation on performance of all optical buffer with large dynamical delay time based on cascaded double loop optical buffers

International Nuclear Information System (INIS)

Yong-Jun, Wang; Xiang-Jun, Xin; Xiao-Lei, Zhang; Chong-Qing, Wu; Kuang-Lu, Yu

2010-01-01

Optical buffers are critical for optical signal processing in future optical packet-switched networks. In this paper, a theoretical study as well as an experimental demonstration on a new optical buffer with large dynamical delay time is carried out based on cascaded double loop optical buffers (DLOBs). It is found that pulse distortion can be restrained by a negative optical control mode when the optical packet is in the loop. Noise analysis indicates that it is feasible to realise a large variable delay range by cascaded DLOBs. These conclusions are validated by the experiment system with 4-stage cascaded DLOBs. Both the theoretical simulations and the experimental results indicate that a large delay range of 1–9999 times the basic delay unit and a fine granularity of 25 ns can be achieved by the cascaded DLOBs. The performance of the cascaded DLOBs is suitable for the all optical networks. (classical areas of phenomenology)

Structural and optical investigation of Te-based chalcogenide thin films

Energy Technology Data Exchange (ETDEWEB)

Sharma, Rita, E-mail: reetasharma2012@gmail.com; Sharma, Shaveta; Thangaraj, R.; Mian, M. [Semiconductors Laboratory, Department of Physics, GND University, Amritsar (India); Chander, Ravi [Applied Science Deptt. Govt. Polytechnic College Amritsar (India); Kumar, Praveen [Department of Physics, DAV University, Sarmastipur, Jalandhar-144012 (India)

2015-05-15

We report the structural and optical properties of thermally evaporated Bi{sub 2}Te{sub 3}, In{sub 2}Te{sub 3} and InBiTe{sub 3} films by using X-ray diffraction, optical and Raman Spectroscopy techniques. The as-prepared thin films were found to be Semi-crystalline by X-ray diffraction. Particle Size and Strain has been calculated from XRD data. The optical constants, film thickness, refractive index and optical band gap (E{sub g}) has been reported for In{sub 2}Te{sub 3}, InBiTe{sub 3} films. Raman Spectroscopy was performed to investigate the effect of Bi, In, on lattice vibration and chemical bonding in Te based chalcogenide glassy alloys.

Silicon-on-Insulator Nanowire Based Optical Waveguide Biosensors

International Nuclear Information System (INIS)

Li, Mingyu; Liu, Yong; Chen, Yangqing; He, Jian-Jun

2016-01-01

Optical waveguide biosensors based on silicon-on-insulator (SOI) nanowire have been developed for label free molecular detection. This paper reviews our work on the design, fabrication and measurement of SOI nanowire based high-sensitivity biosensors employing Vernier effect. Biosensing experiments using cascaded double-ring sensor and Mach-Zehnder- ring sensor integrated with microfluidic channels are demonstrated (paper)

An optical tunable filter array based on LCOS phase grating

Science.gov (United States)

Feng, Dong; Wan, Zhujun; Chen, Xu; Yan, Shijia; Luo, Zhixiang

2018-01-01

This paper reports an optical tunable filter array (TFA) based on a LCOS (liquid crystal on silicon) chip. The input broadband optical beam is first dispersed by a bulk grating and then incident on the LCOS chip. The LCOS chip is phase-only modulated and constructed as a dynamic reflective phase grating. The phase modulation is adjusted to meet the Littrow angle for a specified passband wavelength and thus the optical beam corresponding to this wavelength is steered to the output. The input/output optical beams are coupled to optical fibers with a dual-fiber collimator. Four dualfiber collimators are vertically aligned as the inputs/outputs and the pixels of the LCOS chip are vertically allocated as four independent zones. Thus the device can act as a 4-channel TFA, which is assembled and functionally demonstrated.

High frequency of silver resistance genes in invasive isolates of Enterobacter and Klebsiella species.

Science.gov (United States)

Sütterlin, S; Dahlö, M; Tellgren-Roth, C; Schaal, W; Melhus, Å

2017-07-01

Silver-based products have been marketed as an alternative to antibiotics, and their consumption has increased. Bacteria may, however, develop resistance to silver. To study the presence of genes encoding silver resistance (silE, silP, silS) over time in three clinically important Enterobacteriaceae genera. Using polymerase chain reaction (PCR), 752 bloodstream isolates from the years 1990-2010 were investigated. Age, gender, and ward of patients were registered, and the susceptibility to antibiotics and silver nitrate was tested. Clonality and single nucleotide polymorphism were assessed with repetitive element sequence-based PCR, multi-locus sequence typing, and whole-genome sequencing. Genes encoding silver resistance were detected most frequently in Enterobacter spp. (48%), followed by Klebsiella spp. (41%) and Escherichia coli 4%. Phenotypical resistance to silver nitrate was found in Enterobacter (13%) and Klebsiella (3%) isolates. The lowest carriage rate of sil genes was observed in blood isolates from the neonatology ward (24%), and the highest in blood isolates from the oncology/haematology wards (66%). Presence of sil genes was observed in international high-risk clones. Sequences of the sil and pco clusters indicated that a single mutational event in the silS gene could have caused the phenotypic resistance. Despite a restricted consumption of silver-based products in Swedish health care, silver resistance genes are widely represented in clinical isolates of Enterobacter and Klebsiella species. To avoid further selection and spread of silver-resistant bacteria with a high potential for healthcare-associated infections, the use of silver-based products needs to be controlled and the silver resistance monitored. Copyright © 2017 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Flexible optical fiber sensor based on polyurethane

DEFF Research Database (Denmark)

Kaysir, Md Rejvi; Stefani, Alessio; Lwin, Richard

Polyurethane (PU) based hollow core fibers are investigated as optical sensors. The flexibility of PU fibers makes it suitable for sensing mechanical perturbations. We fabricated a PU fiber using the fiber drawing method, characterized the fiber and experimentally demonstrated a simple way...... to measure deformation, in the form of applied pressure....

Fiber-Optic Vibration Sensor Based on Multimode Fiber

Directory of Open Access Journals (Sweden)

I. Lujo

2008-06-01

Full Text Available The purpose of this paper is to present a fiberoptic vibration sensor based on the monitoring of the mode distribution in a multimode optical fiber. Detection of vibrations and their parameters is possible through observation of the output speckle pattern from the multimode optical fiber. A working experimental model has been built in which all used components are widely available and cheap: a CCD camera (a simple web-cam, a multimode laser in visible range as a light source, a length of multimode optical fiber, and a computer for signal processing. Measurements have shown good agreement with the actual frequency of vibrations, and promising results were achieved with the amplitude measurements although they require some adaptation of the experimental model. Proposed sensor is cheap and lightweight and therefore presents an interesting alternative for monitoring large smart structures.

Optical fibre multi-parameter sensing with secure cloud based signal capture and processing

Science.gov (United States)

Newe, Thomas; O'Connell, Eoin; Meere, Damien; Yuan, Hongwei; Leen, Gabriel; O'Keeffe, Sinead; Lewis, Elfed

2016-05-01

Recent advancements in cloud computing technologies in the context of optical and optical fibre based systems are reported. The proliferation of real time and multi-channel based sensor systems represents significant growth in data volume. This coupled with a growing need for security presents many challenges and presents a huge opportunity for an evolutionary step in the widespread application of these sensing technologies. A tiered infrastructural system approach is adopted that is designed to facilitate the delivery of Optical Fibre-based "SENsing as a Service- SENaaS". Within this infrastructure, novel optical sensing platforms, deployed within different environments, are interfaced with a Cloud-based backbone infrastructure which facilitates the secure collection, storage and analysis of real-time data. Feedback systems, which harness this data to affect a change within the monitored location/environment/condition, are also discussed. The cloud based system presented here can also be used with chemical and physical sensors that require real-time data analysis, processing and feedback.

Advanced applications of scatterometry based optical metrology

Science.gov (United States)

Dixit, Dhairya; Keller, Nick; Kagalwala, Taher; Recchia, Fiona; Lifshitz, Yevgeny; Elia, Alexander; Todi, Vinit; Fronheiser, Jody; Vaid, Alok

2017-03-01

The semiconductor industry continues to drive patterning solutions that enable devices with higher memory storage capacity, faster computing performance, and lower cost per transistor. These developments in the field of semiconductor manufacturing along with the overall minimization of the size of transistors require continuous development of metrology tools used for characterization of these complex 3D device architectures. Optical scatterometry or optical critical dimension (OCD) is one of the most prevalent inline metrology techniques in semiconductor manufacturing because it is a quick, precise and non-destructive metrology technique. However, at present OCD is predominantly used to measure the feature dimensions such as line-width, height, side-wall angle, etc. of the patterned nano structures. Use of optical scatterometry for characterizing defects such as pitch-walking, overlay, line edge roughness, etc. is fairly limited. Inspection of process induced abnormalities is a fundamental part of process yield improvement. It provides process engineers with important information about process errors, and consequently helps optimize materials and process parameters. Scatterometry is an averaging technique and extending it to measure the position of local process induced defectivity and feature-to-feature variation is extremely challenging. This report is an overview of applications and benefits of using optical scatterometry for characterizing defects such as pitch-walking, overlay and fin bending for advanced technology nodes beyond 7nm. Currently, the optical scatterometry is based on conventional spectroscopic ellipsometry and spectroscopic reflectometry measurements, but generalized ellipsometry or Mueller matrix spectroscopic ellipsometry data provides important, additional information about complex structures that exhibit anisotropy and depolarization effects. In addition the symmetry-antisymmetry properties associated with Mueller matrix (MM) elements

Optical Fiber Grating based Sensors

DEFF Research Database (Denmark)

Michelsen, Susanne

2003-01-01

In this thesis differenct optical fiber gratings are used for sensor purposes. If a fiber with a core concentricity error (CCE) is used, a directional dependent bend sensor can be produced. The CCE direction can be determined by means of diffraction. This makes it possible to produce long......-period gratings in a fiber with a CCE direction parallel or perpendicular to the writing direction. The maximal bending sensitivity is independent on the writing direction, but the detailed bending response is different in the two cases. A temperature and strain sensor, based on a long-period grating and two...... sampled gratings, was produced and investigated. It is based on the different temperature and strain response of these gratings. Both a transfer matrix method and an overlap calculation is performed to explain the sensor response. Another type of sensor is based on tuning and modulation of a laser...

Alcohol sensor based on u-bent hetero-structured fiber optic

Science.gov (United States)

Patrialova, Sefi N.; Hatta, Agus M.; Sekartedjo, Sekartedjo

2016-11-01

A sensor based on a fiber optic hetero-structure to determine the concentration of alcohol has been proposed. The structure of the sensing probe in this research is a singlemode-multimode-singlemode (SMS) which bent into Ushaped and soon called as SMS u-bent. The SMS structure was chosen to get a higher sensitivity. This research utilizes the principle of multimode interference and evanescent field by modifying the cladding with various alcohol concentration. Testing of the sensor's performance has been done by measuring the sensor's power output response to the length of the SMS fiber optic, bending diameter, and alcohol concentration. Based on the experiment result, the ubent SMS fiber optic with 50 mm bending diameter and 63 mm MMF lenght has the highest sensitivity, 3.87 dB/% and the minimum resolution, 0.26 x 10-3 %.

Soliton-based ultra-high speed optical communications

Indian Academy of Sciences (India)

All these facts are the outcome of research on optical solitons in fibers in spite of the fact that the commonly used RZ format is not always called a soliton format. The overview presented here attempts to incorporate the role of soliton-based communications research in present day ultra-high speed communications.

Coherent optical communication detection device based on modified balanced optical phase-locked loop

Science.gov (United States)

Zhang, Bo; Sun, Jianfeng; Xu, Mengmeng; Li, Guangyuan; Zhang, Guo; Lao, Chenzhe; He, Hongyu; Lu, Zhiyong

2017-08-01

In the field of satellite communication, space laser communication technology is famous for its high communication rate, good confidentiality, small size, low power consumption and so on. The design of coherent optical communication detection device based on modified balanced optical phase-locked loop (OPLL) is presented in the paper. It combined by local oscillator beam, modulator, voltage controlled oscillator, signal beam, optical filter, 180 degree hybrid, balanced detector, loop filter and signal receiver. Local oscillator beam and voltage controlled oscillator trace the phase variation of signal beam simultaneously. That taking the advantage of voltage controlled oscillator which responses sensitively and tunable local oscillator laser source with large tuning range can trace the phase variation of signal beam rapidly and achieve phase locking. The demand of the phase deviation is very low, and the system is easy to adjust. When the transmitter transmits the binary phase shift keying (BPSK) signal, the receiver can demodulate the baseband signal quickly, which has important significance for the free space coherent laser communication.

Optical feedback-induced light modulation for fiber-based laser ablation.

Science.gov (United States)

Kang, Hyun Wook

2014-11-01

Optical fibers have been used as a minimally invasive tool in various medical fields. However, due to excessive heat accumulation, the distal end of a fiber often suffers from severe melting or devitrification, leading to the eventual fiber failure during laser treatment. In order to minimize thermal damage at the fiber tip, an optical feedback sensor was developed and tested ex vivo. Porcine kidney tissue was used to evaluate the feasibility of optical feedback in terms of signal activation, ablation performance, and light transmission. Testing various signal thresholds demonstrated that 3 V was relatively appropriate to trigger the feedback sensor and to prevent the fiber deterioration during kidney tissue ablation. Based upon the development of temporal signal signatures, full contact mode rapidly activated the optical feedback sensor possibly due to heat accumulation. Modulated light delivery induced by optical feedback diminished ablation efficiency by 30% in comparison with no feedback case. However, long-term transmission results validated that laser ablation assisted with optical feedback was able to almost consistently sustain light delivery to the tissue as well as ablation efficiency. Therefore, an optical feedback sensor can be a feasible tool to protect optical fiber tips by minimizing debris contamination and delaying thermal damage process and to ensure more efficient and safer laser-induced tissue ablation.

Evaluation of Research in Engineering Science in Norway

DEFF Research Database (Denmark)

Van Brussel, Hendrik Van Brussel; Lindberg, Bengt; Cederwall, Klas

This report presents the conclusions of Panel 1: Construction engineering, Production and Operation. The Research Council of Norway (NFR) appointed three expert panels to evaluate Research in Engineering Science in Norway .......This report presents the conclusions of Panel 1: Construction engineering, Production and Operation. The Research Council of Norway (NFR) appointed three expert panels to evaluate Research in Engineering Science in Norway ....

Optical Graphene Gas Sensors Based on Microfibers: A Review

Directory of Open Access Journals (Sweden)

Yu Wu

2018-03-01

Full Text Available Graphene has become a bridge across optoelectronics, mechanics, and bio-chemical sensing due to its unique photoelectric characteristics. Moreover, benefiting from its two-dimensional nature, this atomically thick film with full flexibility has been widely incorporated with optical waveguides such as fibers, realizing novel photonic devices including polarizers, lasers, and sensors. Among the graphene-based optical devices, sensor is one of the most important branch, especially for gas sensing, as rapid progress has been made in both sensing structures and devices in recent years. This article presents a comprehensive and systematic overview of graphene-based microfiber gas sensors regarding many aspects including sensing principles, properties, fabrication, interrogating and implementations.

Monitoring system of hydraulic lifting device based on the fiber optic sensors

Science.gov (United States)

Fajkus, Marcel; Nedoma, Jan; Novak, Martin; Martinek, Radek; Vanus, Jan; Mec, Pavel; Vasinek, Vladimir

2017-10-01

This article deals with the description of the monitoring system of hydraulic lifting device based on the fiber-optic sensors. For minimize the financial costs of the proposed monitoring system, the power evaluation of measured signal has been chosen. The solution is based on an evaluation of the signal obtained using the single point optic fiber sensors with overlapping reflective spectra. For encapsulation of the sensors was used polydimethylsiloxane (PDMS) polymer. To obtain a information of loading is uses the action of deformation of the lifting device on the pair single point optic fiber sensors mounted on the lifting device of the tested car. According to the proposed algorithm is determined information of pressure with an accuracy of +/- 5 %. Verification of the proposed system was realized on the various types of the tested car with different loading. The original contribution of the paper is to verify the new low-cost system for monitoring the hydraulic lifting device based on the fiber-optic sensors.

Homogenous isotropic invisible cloak based on geometrical optics.

Science.gov (United States)

Sun, Jingbo; Zhou, Ji; Kang, Lei

2008-10-27

Invisible cloak derived from the coordinate transformation requires its constitutive material to be anisotropic. In this work, we present a cloak of graded-index isotropic material based on the geometrical optics theory. The cloak is realized by concentric multilayered structure with designed refractive index to achieve the low-scattering and smooth power-flow. Full-wave simulations on such a design of a cylindrical cloak are performed to demonstrate the cloaking ability to incident wave of any polarization. Using normal nature material with isotropy and low absorption, the cloak shows light on a practical path to stealth technology, especially that in the optical range.

Ultracompact all-optical logic gates based on nonlinear plasmonic nanocavities

Directory of Open Access Journals (Sweden)

Yang Xiaoyu

2016-09-01

Full Text Available In this study, nanoscale integrated all-optical XNOR, XOR, and NAND logic gates were realized based on all-optical tunable on-chip plasmon-induced transparency in plasmonic circuits. A large nonlinear enhancement was achieved with an organic composite cover layer based on the resonant excitation-enhancing nonlinearity effect, slow light effect, and field confinement effect provided by the plasmonic nanocavity mode, which ensured a low excitation power of 200 μW that is three orders of magnitude lower than the values in previous reports. A feature size below 600 nm was achieved, which is a one order of magnitude lower compared to previous reports. The contrast ratio between the output logic states “1” and “0” reached 29 dB, which is among the highest values reported to date. Our results not only provide an on-chip platform for the study of nonlinear and quantum optics but also open up the possibility for the realization of nanophotonic processing chips based on nonlinear plasmonics.

Applied research of quantum information based on linear optics

International Nuclear Information System (INIS)

Xu, Xiao-Ye

2016-01-01

This thesis reports on outstanding work in two main subfields of quantum information science: one involves the quantum measurement problem, and the other concerns quantum simulation. The thesis proposes using a polarization-based displaced Sagnac-type interferometer to achieve partial collapse measurement and its reversal, and presents the first experimental verification of the nonlocality of the partial collapse measurement and its reversal. All of the experiments are carried out in the linear optical system, one of the earliest experimental systems to employ quantum communication and quantum information processing. The thesis argues that quantum measurement can yield quantum entanglement recovery, which is demonstrated by using the frequency freedom to simulate the environment. Based on the weak measurement theory, the author proposes that white light can be used to precisely estimate phase, and effectively demonstrates that the imaginary part of the weak value can be introduced by means of weak measurement evolution. Lastly, a nine-order polarization-based displaced Sagnac-type interferometer employing bulk optics is constructed to perform quantum simulation of the Landau-Zener evolution, and by tuning the system Hamiltonian, the first experiment to research the Kibble-Zurek mechanism in non-equilibrium kinetics processes is carried out in the linear optical system.

Applied research of quantum information based on linear optics

Energy Technology Data Exchange (ETDEWEB)

Xu, Xiao-Ye

2016-08-01

This thesis reports on outstanding work in two main subfields of quantum information science: one involves the quantum measurement problem, and the other concerns quantum simulation. The thesis proposes using a polarization-based displaced Sagnac-type interferometer to achieve partial collapse measurement and its reversal, and presents the first experimental verification of the nonlocality of the partial collapse measurement and its reversal. All of the experiments are carried out in the linear optical system, one of the earliest experimental systems to employ quantum communication and quantum information processing. The thesis argues that quantum measurement can yield quantum entanglement recovery, which is demonstrated by using the frequency freedom to simulate the environment. Based on the weak measurement theory, the author proposes that white light can be used to precisely estimate phase, and effectively demonstrates that the imaginary part of the weak value can be introduced by means of weak measurement evolution. Lastly, a nine-order polarization-based displaced Sagnac-type interferometer employing bulk optics is constructed to perform quantum simulation of the Landau-Zener evolution, and by tuning the system Hamiltonian, the first experiment to research the Kibble-Zurek mechanism in non-equilibrium kinetics processes is carried out in the linear optical system.

De-optical-line-terminal hybrid access-aggregation optical network for time-sensitive services based on software-defined networking orchestration

Science.gov (United States)

Bai, Wei; Yang, Hui; Xiao, Hongyun; Yu, Ao; He, Linkuan; Zhang, Jie; Li, Zhen; Du, Yi

2017-11-01

With the increase in varieties of services in network, time-sensitive services (TSSs) appear and bring forward an impending need for delay performance. Ultralow-latency communication has become one of the important development goals for many scenarios in the coming 5G era (e.g., robotics and driverless cars). However, the conventional methods, which decrease delay by promoting the available resources and the network transmission speed, have limited effect; a new breakthrough for ultralow-latency communication is necessary. We propose a de-optical-line-terminal (De-OLT) hybrid access-aggregation optical network (DAON) for TSS based on software-defined networking (SDN) orchestration. In this network, low-latency all-optical communication based on optical burst switching can be achieved by removing OLT. For supporting this network and guaranteeing the quality of service for TSSs, we design SDN-driven control method and service provision method. Numerical results demonstrate the proposed DAON promotes network service efficiency and avoids traffic congestion.

Efficient IP Traffic over Optical Network Based on Wavelength Translation Switching

DEFF Research Database (Denmark)

Jha, Vikas; Kalia, Kartik; Chowdhary, Bhawani Shankar

2016-01-01

With the advent of TCP/IP protocol suite the overall era of communication technologies had been redefined. Now, we can’t ignore the presence of huge amount of IP traffic; data, voice or video increasing day by day creating more pressure on existing communicating media and supporting back bone....... With the humongous popularity of Internet the overall traffic on Internet has the same story. Focusing on transmission of IP traffic in an optical network with signals remaining in their optical nature generated at particular wavelength, proposed is the switching of optically generated IP packets through optical...... cross connects based on translation of wavelength when an IP packet is crossing the optical cross connect. Adding the concepts of layer 3 routing protocols along with the wavelength translation scheme, will help in spanning the overall optical network for a larger area....

Fiber-Optic Surface Temperature Sensor Based on Modal Interference

Directory of Open Access Journals (Sweden)

Frédéric Musin

2016-07-01

Full Text Available Spatially-integrated surface temperature sensing is highly useful when it comes to controlling processes, detecting hazardous conditions or monitoring the health and safety of equipment and people. Fiber-optic sensing based on modal interference has shown great sensitivity to temperature variation, by means of cost-effective image-processing of few-mode interference patterns. New developments in the field of sensor configuration, as described in this paper, include an innovative cooling and heating phase discrimination functionality and more precise measurements, based entirely on the image processing of interference patterns. The proposed technique was applied to the measurement of the integrated surface temperature of a hollow cylinder and compared with a conventional measurement system, consisting of an infrared camera and precision temperature probe. As a result, the optical technique is in line with the reference system. Compared with conventional surface temperature probes, the optical technique has the following advantages: low heat capacity temperature measurement errors, easier spatial deployment, and replacement of multiple angle infrared camera shooting and the continuous monitoring of surfaces that are not visually accessible.

Fluorescence based fiber optic and planar waveguide biosensors. A review

International Nuclear Information System (INIS)

Benito-Peña, Elena; Valdés, Mayra Granda; Glahn-Martínez, Bettina; Moreno-Bondi, Maria C.

2016-01-01

The application of optical biosensors, specifically those that use optical fibers and planar waveguides, has escalated throughout the years in many fields, including environmental analysis, food safety and clinical diagnosis. Fluorescence is, without doubt, the most popular transducer signal used in these devices because of its higher selectivity and sensitivity, but most of all due to its wide versatility. This paper focuses on the working principles and configurations of fluorescence-based fiber optic and planar waveguide biosensors and will review biological recognition elements, sensing schemes, as well as some major and recent applications, published in the last ten years. The main goal is to provide the reader a general overview of a field that requires the joint collaboration of researchers of many different areas, including chemistry, physics, biology, engineering, and material science. - Highlights: • Principles, configurations and fluorescence techniques using fiber optic and planar waveguide biosensors are discussed. • The biorecognition elements and sensing schemes used in fiber optic and planar waveguide platforms are reviewed. • Some major and recent applications of fiber optic and planar waveguide biosensors are introduced.

Fluorescence based fiber optic and planar waveguide biosensors. A review

Energy Technology Data Exchange (ETDEWEB)

Benito-Peña, Elena [Department of Analytical Chemistry, Faculty of Chemistry, Complutense University, 28040 Madrid (Spain); Valdés, Mayra Granda [Department of Analytical Chemistry, Faculty of Chemistry, University of La Habana, 10400 La Habana (Cuba); Glahn-Martínez, Bettina [Department of Analytical Chemistry, Faculty of Chemistry, Complutense University, 28040 Madrid (Spain); Moreno-Bondi, Maria C., E-mail: mcmbondi@quim.ucm.es [Department of Analytical Chemistry, Faculty of Chemistry, Complutense University, 28040 Madrid (Spain)

2016-11-02

The application of optical biosensors, specifically those that use optical fibers and planar waveguides, has escalated throughout the years in many fields, including environmental analysis, food safety and clinical diagnosis. Fluorescence is, without doubt, the most popular transducer signal used in these devices because of its higher selectivity and sensitivity, but most of all due to its wide versatility. This paper focuses on the working principles and configurations of fluorescence-based fiber optic and planar waveguide biosensors and will review biological recognition elements, sensing schemes, as well as some major and recent applications, published in the last ten years. The main goal is to provide the reader a general overview of a field that requires the joint collaboration of researchers of many different areas, including chemistry, physics, biology, engineering, and material science. - Highlights: • Principles, configurations and fluorescence techniques using fiber optic and planar waveguide biosensors are discussed. • The biorecognition elements and sensing schemes used in fiber optic and planar waveguide platforms are reviewed. • Some major and recent applications of fiber optic and planar waveguide biosensors are introduced.

Water-based metamaterial absorbers for optical transparency and broadband microwave absorption

Science.gov (United States)

Pang, Yongqiang; Shen, Yang; Li, Yongfeng; Wang, Jiafu; Xu, Zhuo; Qu, Shaobo

2018-04-01

Naturally occurring water is a promising candidate for achieving broadband absorption. In this work, by virtue of the optically transparent character of the water, the water-based metamaterial absorbers (MAs) are proposed to achieve the broadband absorption at microwave frequencies and optical transparence simultaneously. For this purpose, the transparent indium tin oxide (ITO) and polymethyl methacrylate (PMMA) are chosen as the constitutive materials. The water is encapsulated between the ITO backed plate and PMMA, serving as the microwave loss as well as optically transparent material. Numerical simulations show that the broadband absorption with the efficiency over 90% in the frequency band of 6.4-30 GHz and highly optical transparency of about 85% in the visible region can be achieved and have been well demonstrated experimentally. Additionally, the proposed water-based MA displays a wide-angle absorption performance for both TE and TM waves and is also robust to the variations of the structure parameters, which is much desired in a practical application.

Optical asymmetric cryptography using a three-dimensional space-based model

International Nuclear Information System (INIS)

Chen, Wen; Chen, Xudong

2011-01-01

In this paper, we present optical asymmetric cryptography combined with a three-dimensional (3D) space-based model. An optical multiple-random-phase-mask encoding system is developed in the Fresnel domain, and one random phase-only mask and the plaintext are combined as a series of particles. Subsequently, the series of particles is translated along an axial direction, and is distributed in a 3D space. During image decryption, the robustness and security of the proposed method are further analyzed. Numerical simulation results are presented to show the feasibility and effectiveness of the proposed optical image encryption method

Shared protection based virtual network mapping in space division multiplexing optical networks

Science.gov (United States)

Zhang, Huibin; Wang, Wei; Zhao, Yongli; Zhang, Jie

2018-05-01

Space Division Multiplexing (SDM) has been introduced to improve the capacity of optical networks. In SDM optical networks, there are multiple cores/modes in each fiber link, and spectrum resources are multiplexed in both frequency and core/modes dimensions. Enabled by network virtualization technology, one SDM optical network substrate can be shared by several virtual networks operators. Similar with point-to-point connection services, virtual networks (VN) also need certain survivability to guard against network failures. Based on customers' heterogeneous requirements on the survivability of their virtual networks, this paper studies the shared protection based VN mapping problem and proposes a Minimum Free Frequency Slots (MFFS) mapping algorithm to improve spectrum efficiency. Simulation results show that the proposed algorithm can optimize SDM optical networks significantly in terms of blocking probability and spectrum utilization.

On the possibility of developing incoherent fibre-optic data transmission systems based on signal spectral coding with matched acousto-optical filters

International Nuclear Information System (INIS)

Proklov, Valerii V; Byshevski-Konopko, O A; Grigorievski, V I

2013-01-01

The scheme is suggested for developing the optical communication line based on the principle of code division of multiple access with matched acousto-optical filters and a 16-bit long Walsh sequence. Results of modelling show that such a line can operate if adjacent spectral lines are separated by at least double the Rayleigh criterion. (optical information transmission)

Intraradical colonization by arbuscular mycorrhizal fungi triggers induction of a lipochitooligosaccharide receptor

Science.gov (United States)

Rasmussen, S. R.; Füchtbauer, W.; Novero, M.; Volpe, V.; Malkov, N.; Genre, A.; Bonfante, P.; Stougaard, J.; Radutoiu, S.

2016-07-01

Functional divergence of paralogs following gene duplication is one of the mechanisms leading to evolution of novel pathways and traits. Here we show that divergence of Lys11 and Nfr5 LysM receptor kinase paralogs of Lotus japonicus has affected their specificity for lipochitooligosaccharides (LCOs) decorations, while the innate capacity to recognize and induce a downstream signalling after perception of rhizobial LCOs (Nod factors) was maintained. Regardless of this conserved ability, Lys11 was found neither expressed, nor essential during nitrogen-fixing symbiosis, providing an explanation for the determinant role of Nfr5 gene during Lotus-rhizobia interaction. Lys11 was expressed in root cortex cells associated with intraradical colonizing arbuscular mycorrhizal fungi. Detailed analyses of lys11 single and nfr1nfr5lys11 triple mutants revealed a functional arbuscular mycorrhizal symbiosis, indicating that Lys11 alone, or its possible shared function with the Nod factor receptors is not essential for the presymbiotic phases of AM symbiosis. Hence, both subfunctionalization and specialization appear to have shaped the function of these paralogs where Lys11 acts as an AM-inducible gene, possibly to fine-tune later stages of this interaction.

100 GHz pulse waveform measurement based on electro-optic sampling

Science.gov (United States)

Feng, Zhigang; Zhao, Kejia; Yang, Zhijun; Miao, Jingyuan; Chen, He

2018-05-01

We present an ultrafast pulse waveform measurement system based on an electro-optic sampling technique at 1560 nm and prepare LiTaO3-based electro-optic modulators with a coplanar waveguide structure. The transmission and reflection characteristics of electrical pulses on a coplanar waveguide terminated with an open circuit and a resistor are investigated by analyzing the corresponding time-domain pulse waveforms. We measure the output electrical pulse waveform of a 100 GHz photodiode and the obtained rise times of the impulse and step responses are 2.5 and 3.4 ps, respectively.

Rectangular optical filter based on high-order silicon microring resonators

Science.gov (United States)

Bao, Jia-qi; Yu, Kan; Wang, Li-jun; Yin, Juan-juan

2017-07-01

The rectangular optical filter is one of the most important optical switching components in the dense wavelength division multiplexing (DWDM) fiber-optic communication system and the intelligent optical network. The integrated highorder silicon microring resonator (MRR) is one of the best candidates to achieve rectangular filtering spectrum response. In general, the spectrum response rectangular degree of the single MRR is very low, so it cannot be used in the DWDM system. Using the high-order MRRs, the bandwidth of flat-top pass band, the out-of-band rejection degree and the roll-off coefficient of the edge will be improved obviously. In this paper, a rectangular optical filter based on highorder MRRs with uniform couplers is presented and demonstrated. Using 15 coupled race-track MRRs with 10 μm in radius, the 3 dB flat-top pass band of 2 nm, the out-of-band rejection ratio of 30 dB and the rising and falling edges of 48 dB/nm can be realized successfully.

Rectangular optical filter based on high-order silicon microring resonators

Institute of Scientific and Technical Information of China (English)

BAO Jia-qi; YU Kan; WANG Li-jun; YIN Juan-juan

2017-01-01

The rectangular optical filter is one of the most important optical switching components in the dense wavelength division multiplexing (DWDM) fiber-optic communication system and the intelligent optical network.The integrated highorder silicon microring resonator (MRR) is one of the best candidates to achieve rectangular filtering spectrum response.In general,the spectrum response rectangular degree of the single MRR is very low,so it cannot be used in the DWDM system.Using the high-order MRRs,the bandwidth of flat-top pass band,the out-of-band rejection degree and the roll-off coefficient of the edge will be improved obviously.In this paper,a rectangular optical filter based on highorder MRRs with uniform couplers is presented and demonstrated.Using 15 coupled race-track MRRs with 10 μm in radius,the 3 dB flat-top pass band of 2 nm,the out-of-band rejection ratio of 30 dB and the rising and falling edges of 48 dB/nm can be realized successfully.

Semi-analytical model of filtering effects in microwave phase shifters based on semiconductor optical amplifiers

DEFF Research Database (Denmark)

Chen, Yaohui; Xue, Weiqi; Öhman, Filip

2008-01-01

We present a model to interpret enhanced microwave phase shifts based on filter assisted slow and fast light effects in semiconductor optical amplifiers. The model also demonstrates the spectral phase impact of input optical signals.......We present a model to interpret enhanced microwave phase shifts based on filter assisted slow and fast light effects in semiconductor optical amplifiers. The model also demonstrates the spectral phase impact of input optical signals....

Optical fiber strain sensor using fiber resonator based on frequency comb Vernier spectroscopy

DEFF Research Database (Denmark)

Zhang, Liang; Lu, Ping; Chen, Li

2012-01-01

A novel (to our best knowledge) optical fiber strain sensor using a fiber ring resonator based on frequency comb Vernier spectroscopy is proposed and demonstrated. A passively mode-locked optical fiber laser is employed to generate a phased-locked frequency comb. Strain applied to the optical fib...

Research on the adaptive optical control technology based on DSP

Science.gov (United States)

Zhang, Xiaolu; Xue, Qiao; Zeng, Fa; Zhao, Junpu; Zheng, Kuixing; Su, Jingqin; Dai, Wanjun

2018-02-01

Adaptive optics is a real-time compensation technique using high speed support system for wavefront errors caused by atmospheric turbulence. However, the randomness and instantaneity of atmospheric changing introduce great difficulties to the design of adaptive optical systems. A large number of complex real-time operations lead to large delay, which is an insurmountable problem. To solve this problem, hardware operation and parallel processing strategy are proposed, and a high-speed adaptive optical control system based on DSP is developed. The hardware counter is used to check the system. The results show that the system can complete a closed loop control in 7.1ms, and improve the controlling bandwidth of the adaptive optical system. Using this system, the wavefront measurement and closed loop experiment are carried out, and obtain the good results.

Optical diagnostics based on elastic scattering: Recent clinical demonstrations with the Los Alamos Optical Biopsy System

Energy Technology Data Exchange (ETDEWEB)

Bigio, I.J.; Loree, T.R.; Mourant, J.; Shimada, T. [Los Alamos National Lab., NM (United States); Story-Held, K.; Glickman, R.D. [Texas Univ. Health Science Center, San Antonio, TX (United States). Dept. of Ophthalmology; Conn, R. [Lovelace Medical Center, Albuquerque, NM (United States). Dept. of Urology

1993-08-01

A non-invasive diagnostic tool that could identify malignancy in situ and in real time would have a major impact on the detection and treatment of cancer. We have developed and are testing early prototypes of an optical biopsy system (OBS) for detection of cancer and other tissue pathologies. The OBS invokes a unique approach to optical diagnosis of tissue pathologies based on the elastic scattering properties, over a wide range of wavelengths, of the microscopic structure of the tissue. The use of elastic scattering as the key to optical tissue diagnostics in the OBS is based on the fact that many tissue pathologies, including a majority of cancer forms, manifest significant architectural changes at the cellular and sub-cellular level. Since the cellular components that cause elastic scattering have dimensions typically on the order of visible to near-IR wavelengths, the elastic (Mie) scattering properties will be strongly wavelength dependent. Thus, morphology and size changes can be expected to cause significant changes in an optical signature that is derived from the wavelength dependence of elastic scattering. The data acquisition and storage/display time with the OBS instrument is {approximately}1 second. Thus, in addition to the reduced invasiveness of this technique compared with current state-of-the-art methods (surgical biopsy and pathology analysis), the OBS offers the possibility of impressively faster diagnostic assessment. The OBS employs a small fiber-optic probe that is amenable to use with any endoscope, catheter or hypodermic, or to direct surface examination (e.g. as in skin cancer or cervical cancer). It has been tested in vitro on animal and human tissue samples, and clinical testing in vivo is currently in progress.

A beamforming system based on the acousto-optic effect

DEFF Research Database (Denmark)

Torras Rosell, Antoni; Barrera Figueroa, Salvador; Jacobsen, Finn

2012-01-01

Beamforming techniques are usually based on microphone arrays. The present work uses a beam of light as a sensor element, and describes a beamforming system that locates sound sources based on the acousto-optic effect, this is, the interaction between sound and light. The use of light as a sensin...

640 Gbit/s RZ-to-NRZ format conversion based on optical phase filtering

DEFF Research Database (Denmark)

Maram, Reza; Kong, Deming; Galili, Michael

2014-01-01

We propose a novel approach for all optical RZ-to-NRZ conversion based on optical phase filtering. The proposed concept is experimentally validated through format conversion of a 640 Gbit/s coherent RZ signal to NRZ signal using a simple phase filter implemented by a commercial optical waveshaper....

Optical character recognition based on nonredundant correlation measurements.

Science.gov (United States)

Braunecker, B; Hauck, R; Lohmann, A W

1979-08-15

The essence of character recognition is a comparison between the unknown character and a set of reference patterns. Usually, these reference patterns are all possible characters themselves, the whole alphabet in the case of letter characters. Obviously, N analog measurements are highly redundant, since only K = log(2)N binary decisions are enough to identify one out of N characters. Therefore, we devised K reference patterns accordingly. These patterns, called principal components, are found by digital image processing, but used in an optical analog computer. We will explain the concept of principal components, and we will describe experiments with several optical character recognition systems, based on this concept.

A simulator-based approach to evaluating optical trackers

NARCIS (Netherlands)

Smit, F.A.; Liere, van R.

2009-01-01

We describe a software framework to evaluate the performance of model-based optical trackers in virtual environments. The framework can be used to evaluate and compare the performance of different trackers under various conditions, to study the effects of varying intrinsic and extrinsic camera

Analysis of Plasmonics Based Fiber Optic Sensing Structures

Science.gov (United States)

Moayyed, Hamed

The work described in this PhD Thesis focuses on the post-processing of optical fibers and their enhancement as sensing element. Since the majority of sensors presented are based in Fabry-Perot interferometers, an historical overview of this category of optical fiber sensors is firstly presented. This review considers the works published since the early years, in the beginning of the 1980s, until the middle of 2015. The incorporation of microcavities at the tip of a single mode fiber was extensively studied, particularly for the measurement of nitrogen and methane gas pressure. These cavities were fabricated using hollow core silica tubes and a hollow core photonic crystal fiber. Following a different approach, the microcavities were incorporated between two sections of single mode fiber. In this case, the low sensitivity to temperature makes these microcavities highly desirable for the measurement of strain at high temperatures. Competences in post-processing techniques such as the chemical etching and the writing of periodical structures in the fiber core by means of an excimer or a femtosecond laser were also acquired in the course of the PhD programme. One of the works consisted in the design and manufacturing of a double clad optical fiber. The refractive index of the inner cladding was higher than the one of the outer cladding and the core. Thus, light was guided in the inner cladding instead of propagating in the core. This situation was overcome by applying chemical etching, thus removing the inner cladding. The core, surrounded by air, was then able to guide light. Two different applications were found for this fiber, as a temperature sensor and as an optical refractometer. In the last, the optical phase changes with the liquid refractive index. Two different types of fiber Bragg gratings were characterized in strain and temperature. Sensing structures obtained through the phase mask technique at the tip of an optical fiber were subjected to chemical

Micro-resonators based on integrated polymer technology for optical sensing

OpenAIRE

Girault , Pauline; Lemaitre , Jonathan; Guendouz , Mohammed; Lorrain , Nathalie; Poffo , Luiz; Gadonna , Michel; Bosc , Dominique

2014-01-01

International audience; Research on sensors has experienced a noticeable development over the last decades especially in label free optical biosensors. However, compact sensors without markers for rapid, reliable and inexpensive detection of various substances induces a significant research of new technological solutions. The context of this work is the development of a sensor based on easily integrated and inexpensive micro-resonator (MR) component in integrated optics, highly sensitive and ...

Optically controlled tunable dispersion compensators based on pumped fiber gratings.

Science.gov (United States)

Shu, Xuewen; Sugden, Kate; Bennion, Ian

2011-08-01

We demonstrate optically tunable dispersion compensators based on pumping fiber Bragg gratings made in Er/Yb codoped fiber. The tunable dispersion for a chirped grating and also a uniform-period grating was successfully demonstrated in the experiment. The dispersion of the chirped grating was tuned from 900 to 1990 ps/nm and also from -600 to -950 ps/nm in the experiment. © 2011 Optical Society of America

Dual-modal cancer detection based on optical pH sensing and Raman spectroscopy.

Science.gov (United States)

Kim, Soogeun; Lee, Seung Ho; Min, Sun Young; Byun, Kyung Min; Lee, Soo Yeol

2017-10-01

A dual-modal approach using Raman spectroscopy and optical pH sensing was investigated to discriminate between normal and cancerous tissues. Raman spectroscopy has demonstrated the potential for in vivo cancer detection. However, Raman spectroscopy has suffered from strong fluorescence background of biological samples and subtle spectral differences between normal and disease tissues. To overcome those issues, pH sensing is adopted to Raman spectroscopy as a dual-modal approach. Based on the fact that the pH level in cancerous tissues is lower than that in normal tissues due to insufficient vasculature formation, the dual-modal approach combining the chemical information of Raman spectrum and the metabolic information of pH level can improve the specificity of cancer diagnosis. From human breast tissue samples, Raman spectra and pH levels are measured using fiber-optic-based Raman and pH probes, respectively. The pH sensing is based on the dependence of pH level on optical transmission spectrum. Multivariate statistical analysis is performed to evaluate the classification capability of the dual-modal method. The analytical results show that the dual-modal method based on Raman spectroscopy and optical pH sensing can improve the performance of cancer classification. (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

Submicron hollow spot generation by solid immersion lens and structured illumination

International Nuclear Information System (INIS)

Kim, M-S; Scharf, T; Herzig, H P; Assafrao, A C; Wachters, A J H; Pereira, S F; Urbach, H P; Brun, M; Olivier, S; Nicoletti, S

2012-01-01

We report on the experimental and numerical demonstration of immersed submicron-size hollow focused spots, generated by structuring the polarization state of an incident light beam impinging on a micro-size solid immersion lens (μ-SIL) made of SiO 2 . Such structured focal spots are characterized by a doughnut-shaped intensity distribution, whose central dark region is of great interest for optical trapping of nano-size particles, super-resolution microscopy and lithography. In this work, we have used a high-resolution interference microscopy technique to measure the structured immersed focal spots, whose dimensions were found to be significantly reduced due to the immersion effect of the μ-SIL. In particular, a reduction of 37% of the dark central region was verified. The measurements were compared with a rigorous finite element method model for the μ-SIL, revealing excellent agreement between them. (paper)

Integrating sphere-based setup as an accurate system for optical properties measurements

CSIR Research Space (South Africa)

Abdalmonem, S

2010-09-01

Full Text Available Determination of the optical properties of solid and liquid samples has great importance. Since the integrating sphere-based setup is used to measure the amount of reflected and transmitted light by the examined samples, optical properties could...

Optical implementation of neural learning algorithms based on cross-gain modulation in a semiconductor optical amplifier

Science.gov (United States)

Li, Qiang; Wang, Zhi; Le, Yansi; Sun, Chonghui; Song, Xiaojia; Wu, Chongqing

2016-10-01

Neuromorphic engineering has a wide range of applications in the fields of machine learning, pattern recognition, adaptive control, etc. Photonics, characterized by its high speed, wide bandwidth, low power consumption and massive parallelism, is an ideal way to realize ultrafast spiking neural networks (SNNs). Synaptic plasticity is believed to be critical for learning, memory and development in neural circuits. Experimental results have shown that changes of synapse are highly dependent on the relative timing of pre- and postsynaptic spikes. Synaptic plasticity in which presynaptic spikes preceding postsynaptic spikes results in strengthening, while the opposite timing results in weakening is called antisymmetric spike-timing-dependent plasticity (STDP) learning rule. And synaptic plasticity has the opposite effect under the same conditions is called antisymmetric anti-STDP learning rule. We proposed and experimentally demonstrated an optical implementation of neural learning algorithms, which can achieve both of antisymmetric STDP and anti-STDP learning rule, based on the cross-gain modulation (XGM) within a single semiconductor optical amplifier (SOA). The weight and height of the potentitation and depression window can be controlled by adjusting the injection current of the SOA, to mimic the biological antisymmetric STDP and anti-STDP learning rule more realistically. As the injection current increases, the width of depression and potentitation window decreases and height increases, due to the decreasing of recovery time and increasing of gain under a stronger injection current. Based on the demonstrated optical STDP circuit, ultrafast learning in optical SNNs can be realized.

Scheduling algorithm for data relay satellite optical communication based on artificial intelligent optimization

Science.gov (United States)

Zhao, Wei-hu; Zhao, Jing; Zhao, Shang-hong; Li, Yong-jun; Wang, Xiang; Dong, Yi; Dong, Chen

2013-08-01

Optical satellite communication with the advantages of broadband, large capacity and low power consuming broke the bottleneck of the traditional microwave satellite communication. The formation of the Space-based Information System with the technology of high performance optical inter-satellite communication and the realization of global seamless coverage and mobile terminal accessing are the necessary trend of the development of optical satellite communication. Considering the resources, missions and restraints of Data Relay Satellite Optical Communication System, a model of optical communication resources scheduling is established and a scheduling algorithm based on artificial intelligent optimization is put forwarded. According to the multi-relay-satellite, multi-user-satellite, multi-optical-antenna and multi-mission with several priority weights, the resources are scheduled reasonable by the operation: "Ascertain Current Mission Scheduling Time" and "Refresh Latter Mission Time-Window". The priority weight is considered as the parameter of the fitness function and the scheduling project is optimized by the Genetic Algorithm. The simulation scenarios including 3 relay satellites with 6 optical antennas, 12 user satellites and 30 missions, the simulation result reveals that the algorithm obtain satisfactory results in both efficiency and performance and resources scheduling model and the optimization algorithm are suitable in multi-relay-satellite, multi-user-satellite, and multi-optical-antenna recourses scheduling problem.

Fiber-optic perimeter security system based on WDM technology

Science.gov (United States)

Polyakov, Alexandre V.

2017-10-01

Intelligent underground fiber optic perimeter security system is presented. Their structure, operation, software and hardware with neural networks elements are described. System allows not only to establish the fact of violation of the perimeter, but also to locate violations. This is achieved through the use of WDM-technology division spectral information channels. As used quasi-distributed optoelectronic recirculation system as a discrete sensor. The principle of operation is based on registration of the recirculation period change in the closed optoelectronic circuit at different wavelengths under microstrain exposed optical fiber. As a result microstrain fiber having additional power loss in a fiber optical propagating pulse, which causes a time delay as a result of switching moments of the threshold device. To separate the signals generated by intruder noise and interference, the signal analyzer is used, based on the principle of a neural network. The system detects walking, running or crawling intruder, as well as undermining attempts to register under the perimeter line. These alarm systems can be used to protect the perimeters of facilities such as airports, nuclear reactors, power plants, warehouses, and other extended territory.

Time lens based optical fourier transformation for advanced processing of spectrally-efficient OFDM and N-WDM signals

DEFF Research Database (Denmark)

Guan, Pengyu; Røge, Kasper Meldgaard; Morioka, Toshio

2016-01-01

We review recent progress in the use of time lens based optical Fourier transformation for advanced optical signal processing, with focus on all-optical generation, detection and format conversion of spectrally-efficient OFDM and N-WDM signals.......We review recent progress in the use of time lens based optical Fourier transformation for advanced optical signal processing, with focus on all-optical generation, detection and format conversion of spectrally-efficient OFDM and N-WDM signals....

Hierarchy Bayesian model based services awareness of high-speed optical access networks

Science.gov (United States)

Bai, Hui-feng

2018-03-01

As the speed of optical access networks soars with ever increasing multiple services, the service-supporting ability of optical access networks suffers greatly from the shortage of service awareness. Aiming to solve this problem, a hierarchy Bayesian model based services awareness mechanism is proposed for high-speed optical access networks. This approach builds a so-called hierarchy Bayesian model, according to the structure of typical optical access networks. Moreover, the proposed scheme is able to conduct simple services awareness operation in each optical network unit (ONU) and to perform complex services awareness from the whole view of system in optical line terminal (OLT). Simulation results show that the proposed scheme is able to achieve better quality of services (QoS), in terms of packet loss rate and time delay.

Comparison of delay-interferometer and time-lens-based all-optical OFDM demultiplexers

DEFF Research Database (Denmark)

Lillieholm, Mads; Mulvad, Hans Christian Hansen; Galili, Michael

2015-01-01

) based on time lenses. In the former scheme, cascaded delay-interferometers (DIs) are used to perform the O-DFT, with subsequent active optical gating to remove the intercarrier interference (ICI). Here a reduced-complexity partial O-DFT, realized by replacing a number of DIs with optical bandpass......In this paper we present the first detailed numerical comparison of two promising all-optical schemes to demultiplex orthogonal frequency-division multiplexing (OFDM) signals. The investigated schemes are the optical discrete Fourier transformation (O-DFT) and the optical spectral magnification (SM...... filters, is investigated. In the latter scheme the OFDM spectrum is magnified, allowing for simple optical bandpass filtering of the individual subcarriers with reduced ICI. Ideally only a single unit consisting of two time lenses is needed, reducing the complexity and potentially the energy consumption...

Comparison of Delay-Interferometer and Time- Lens-Based All-Optical OFDM Demultiplexers

DEFF Research Database (Denmark)

Lillieholm, Mads; Mulvad, Hans Christian Hansen; Galili, Michael

2015-01-01

(SM) based on time lenses. In the former scheme, cascaded delay-interferometers (DIs) are used to perform the O-DFT, with subsequent active optical gating to remove the intercarrier interference (ICI). Here, a reduced-complexity partial O-DFT, realized by replacing a number of DIs with optical......In this letter, we present the first detailed numerical comparison of two promising all-optical schemes to demultiplex orthogonal frequency-division multiplexing (OFDM) signals. The investigated schemes are the optical discrete Fourier transformation (O-DFT) and the optical spectral magnification...... bandpass filters, is investigated. In the latter scheme, the OFDM spectrum is magnified, allowing for simple optical bandpass filtering of the individual subcarriers with reduced ICI. Ideally, only a single unit consisting of two time lenses is needed, reducing the complexity and potentially the energy...

Fiber optic-based regenerable biosensor

Science.gov (United States)

Sepaniak, Michael J.; Vo-Dinh, Tuan

1993-01-01

A fiber optic-based regenerable biosensor. The biosensor is particularly suitable for use in microscale work in situ. In one embodiment, the biosensor comprises a reaction chamber disposed adjacent the distal end of a waveguide and adapted to receive therein a quantity of a sample containing an analyte. Leading into the chamber is a plurality of capillary conduits suitable for introducing into the chamber antibodies or other reagents suitable for selective interaction with a predetermined analyte. Following such interaction, the contents of the chamber may be subjected to an incident energy signal for developing fluorescence within the chamber that is detectable via the optical fiber and which is representative of the presence, i.e. concentration, of the selected analyte. Regeneration of the biosensor is accomplished by replacement of the reagents and/or the analyte, or a combination of these, at least in part via one or more of the capillary conduits. The capillary conduits extend from their respective terminal ends that are in fluid communication with the chamber, away from the chamber to respective location(s) remote from the chamber thereby permitting in situ location of the chamber and remote manipulation and/or analysis of the activity with the chamber.

A new repeatable, optical writing and electrical erasing device based on photochromism and electrochromism of viologen

International Nuclear Information System (INIS)

Gao, Li-ping; Wei, Jian; Wang, Yue-chuan; Ding, Guo-jing; Yang, Yu-lin

2012-01-01

New optical writing and electrical erasing devices have been successfully fabricated that exploit the photochromism and electrochromism of viologen. In a preliminary study, both the structures of viologen and device were investigated in detail by UV–vis spectra in order to confirm their effects on the optical writing and electrical erasing performances of corresponding devices. For sandwiched, single and complementary devices based on benzyl viologen (BV 2+ ), only optical writing can be performed, not electrical erasing operations, which indicated these devices cannot realize optical information rewriting. For single and complementary devices based on styrene-functional viologen (V BV 2+ ) and acrylic-functional viologen (ACV 2+ ), optical writing and electrical erasing operations can be reversibly performed and optical information rewriting realized. It is clear that single devices based on V BV 2+ and ACV 2+ possess better performance accompanied with contrast without significant degradation and bleaching times and without significant deterioration over 10 repeated writing/erasing cycles. Furthermore, we put forward possible mechanisms for sandwiched, single and complementary devices based on V BV 2+ and ACV 2+ for the optical writing and electrical erasing operations. This study provides a new strategy to design optical writing and electrical erasing devices to realize optical information rewriting. (paper)

Fast optical recording media based on semiconductor nanostructures for image recording and processing

International Nuclear Information System (INIS)

Kasherininov, P. G.; Tomasov, A. A.

2008-01-01

Fast optical recording media based on semiconductor nanostructures (CdTe, GaAs) for image recording and processing with a speed to 10 6 cycle/s (which exceeds the speed of known recording media based on metal-insulator-semiconductor-(liquid crystal) (MIS-LC) structures by two to three orders of magnitude), a photosensitivity of 10 -2 V/cm 2 , and a spatial resolution of 5-10 (line pairs)/mm are developed. Operating principles of nanostructures as fast optical recording media and methods for reading images recorded in such media are described. Fast optical processors for recording images in incoherent light based on CdTe crystal nanostructures are implemented. The possibility of their application to fabricate image correlators is shown.

An All-optical 3R Regenerator Using Fiber-based Four Wave Mixing

Directory of Open Access Journals (Sweden)

Theint Theint Htike

2015-07-01

Full Text Available Abstract All optical 3R regeneration is a key function of the future all optical network and ultra-long-haul transmission. In this paper all-optical regenerator utilizes a Fabry-Perot F-P filter for clock recovery four wavemixing based in a 500m-long highly nonlinear fiber and optical band pass filter for retiming and reshaping. A 10Gbs RZ signal was transmitted through 1200 km with a power penalty of 1dB at a BER of 10-9 compared to the back-to-back case. All optical 3R is shown to improve the performance of input signals degraded by transmission impairments and timing jitter of 10ps is reduced.

Optical security based on near-field processes at the nanoscale

International Nuclear Information System (INIS)

Naruse, Makoto; Tate, Naoya; Ohtsu, Motoichi

2012-01-01

Optics has been playing crucial roles in security applications ranging from authentication and watermarks to anti-counterfeiting. However, since the fundamental physical principle involves optical far-fields, or propagating light, diffraction of light causes severe difficulties, for example in device scaling and system integration. Moreover, conventional security technologies in use today have been facing increasingly stringent demands to safeguard against threats such as counterfeiting of holograms, requiring innovative physical principles and technologies to overcome their limitations. Nanophotonics, which utilizes interactions between light and matter at the nanometer scale via optical near-field interactions, can break through the diffraction limit of conventional propagating light. Moreover, nanophotonics has some unique physical attributes, such as localized optical energy transfer and the hierarchical nature of optical near-field interactions, which pave the way for novel security functionalities. This paper reviews the physical principles and describes some experimental demonstrations of systems based on nanophotonics with respect to security applications such as tamper resistance against non-invasive and invasive attacks, hierarchical information retrieval, hierarchical holograms, authentication, and traceability. (paper)

Radiation imaging with optically read out GEM-based detectors

Science.gov (United States)

Brunbauer, F. M.; Lupberger, M.; Oliveri, E.; Resnati, F.; Ropelewski, L.; Streli, C.; Thuiner, P.; van Stenis, M.

2018-02-01

Modern imaging sensors allow for high granularity optical readout of radiation detectors such as MicroPattern Gaseous Detectors (MPGDs). Taking advantage of the high signal amplification factors achievable by MPGD technologies such as Gaseous Electron Multipliers (GEMs), highly sensitive detectors can be realised and employing gas mixtures with strong scintillation yield in the visible wavelength regime, optical readout of such detectors can provide high-resolution event representations. Applications from X-ray imaging to fluoroscopy and tomography profit from the good spatial resolution of optical readout and the possibility to obtain images without the need for extensive reconstruction. Sensitivity to low-energy X-rays and energy resolution permit energy resolved imaging and material distinction in X-ray fluorescence measurements. Additionally, the low material budget of gaseous detectors and the possibility to couple scintillation light to imaging sensors via fibres or mirrors makes optically read out GEMs an ideal candidate for beam monitoring detectors in high energy physics as well as radiotherapy. We present applications and achievements of optically read out GEM-based detectors including high spatial resolution imaging and X-ray fluorescence measurements as an alternative readout approach for MPGDs. A detector concept for low intensity applications such as X-ray crystallography, which maximises detection efficiency with a thick conversion region but mitigates parallax-induced broadening is presented and beam monitoring capabilities of optical readout are explored. Augmenting high resolution 2D projections of particle tracks obtained with optical readout with timing information from fast photon detectors or transparent anodes for charge readout, 3D reconstruction of particle trajectories can be performed and permits the realisation of optically read out time projection chambers. Combining readily available high performance imaging sensors with compatible

Event-based Simulation Model for Quantum Optics Experiments

NARCIS (Netherlands)

De Raedt, H.; Michielsen, K.; Jaeger, G; Khrennikov, A; Schlosshauer, M; Weihs, G

2011-01-01

We present a corpuscular simulation model of optical phenomena that does not require the knowledge of the solution of a wave equation of the whole system and reproduces the results of Maxwell's theory by generating detection events one-by-one. The event-based corpuscular model gives a unified

Fiber-optical microphones and accelerometers based on polymer optical fiber Bragg gratings

DEFF Research Database (Denmark)

Yuan, Scott Wu; Stefani, Alessio; Bang, Ole

2010-01-01

Polymer optical fibers (POFs) are ideal for applications as the sensing element in fiber-optical microphones and accelerometers based on fiber Bragg gratings (FBGs) due to their reduced Young’s Modulus of 3.2GPa, compared to 72GPa of Silica. To maximize the sensitivity and the dynamic range...... of the device the outer diameter and the length of the sensing fiber segment should be as small as possible. To this end we have fabricated 3mm FBGs in single-mode step-index POFs of diameter 115 micron, using 325nm UV writing and a phase-mask technique. 6mm POF sections with FBGs in the center have been glued...... to standard Silica SMF28 fibers. These POF FBGs have been characterized in terms of temperature and strain to find operating regimes with no hysteresis. Commercial fast wavelength interrogators (KHz) are shown to be able to track the thin POF FBGs and they are finally applied in a prototype accelerometer...

Optical MSD symbolic substitution system based on a higher ordered rule

Science.gov (United States)

Reddy, A. K.; Mallikarjun, Tatipamula; Raina, J. P.

1992-12-01

The advantages provided by Photonic Computing has been well documented. An Optical arithmetic processor has to take full advantage of the massive parallelism in optical signals. Such a processor, using the Modified - Signed - Digit (MSD) number . (i) representation, has been presented here based (2) on the symbolic substitution 1ogi. The higher order symbolic substitution rules are formulated for the addition operation, which is carried out in just two steps. Based on the addition operation, the other arithmetic operations - subtraction, multiplication and division - are implemented. Finally, the usefulness of this MSD system is studied.

Effective star tracking method based on optical flow analysis for star trackers.

Science.gov (United States)

Sun, Ting; Xing, Fei; Wang, Xiaochu; Li, Jin; Wei, Minsong; You, Zheng

2016-12-20

Benefiting from rapid development of imaging sensor technology, modern optical technology, and a high-speed computing chip, the star tracker's accuracy, dynamic performance, and update rate have been greatly improved with low power consumption and miniature size. The star tracker is currently one of the most competitive attitude measurement sensors. However, due to restrictions of the optical imaging system, difficulties still exist in moving star spot detection and star tracking when in special motion conditions. An effective star tracking method based on optical flow analysis for star trackers is proposed in this paper. Spot-based optical flow, based on a gray gradient between two adjacent star images, is analyzed to distinguish the star spot region and obtain an accurate star spot position so that the star tracking can keep continuous under high dynamic conditions. The obtained star vectors and extended Kalman filter (EKF) are then combined to conduct an angular velocity estimation to ensure region prediction of the star spot; this can be combined with the optical flow analysis result. Experiment results show that the method proposed in this paper has advantages in conditions of large angular velocity and large angular acceleration, despite the presence of noise. Higher functional density and better performance can be achieved; thus, the star tracker can be more widely applied in small satellites, remote sensing, and other complex space missions.

Novel flat datacenter network architecture based on scalable and flow-controlled optical switch system

NARCIS (Netherlands)

Miao, W.; Luo, J.; Di Lucente, S.; Dorren, H.J.S.; Calabretta, N.

2013-01-01

We propose and demonstrate an optical flat datacenter network based on scalable optical switch system with optical flow control. 4×4 dynamic switch operation at 40 Gb/s reported 300ns minimum end-to-end latency (including 25m transmission link) and

Negative base encoding in optical linear algebra processors

Science.gov (United States)

Perlee, C.; Casasent, D.

1986-01-01

In the digital multiplication by analog convolution algorithm, the bits of two encoded numbers are convolved to form the product of the two numbers in mixed binary representation; this output can be easily converted to binary. Attention is presently given to negative base encoding, treating base -2 initially, and then showing that the negative base system can be readily extended to any radix. In general, negative base encoding in optical linear algebra processors represents a more efficient technique than either sign magnitude or 2's complement encoding, when the additions of digitally encoded products are performed in parallel.

The optimal input optical pulse shape for the self-phase modulation based chirp generator

Science.gov (United States)

Zachinyaev, Yuriy; Rumyantsev, Konstantin

2018-04-01

The work is aimed to obtain the optimal shape of the input optical pulse for the proper functioning of the self-phase modulation based chirp generator allowing to achieve high values of chirp frequency deviation. During the research, the structure of the device based on self-phase modulation effect using has been analyzed. The influence of the input optical pulse shape of the transmitting optical module on the chirp frequency deviation has been studied. The relationship between the frequency deviation of the generated chirp and frequency linearity for the three options for implementation of the pulse shape has been also estimated. The results of research are related to the development of the theory of radio processors based on fiber-optic structures and can be used in radars, secure communications, geolocation and tomography.

Cost and Performance Comparison of an Earth-Orbiting Optical Communication Relay Transceiver and a Ground-Based Optical Receiver Subnet

Science.gov (United States)

Wilson, K. E.; Wright, M.; Cesarone, R.; Ceniceros, J.; Shea, K.

2003-01-01

Optical communications can provide high-data-rate telemetry from deep-space probes with subsystems that have lower mass, consume less power, and are smaller than their radio frequency (RF) counterparts. However, because optical communication is more affected by weather than is RF communication, it requires ground station site diversity to mitigate the adverse effects of inclement weather on the link. An optical relay satellite is not affected by weather and can provide 24-hour coverage of deep-space probes. Using such a relay satellite for the deep-space link and an 8.4-GHz (X-band) link to a ground station would support high-data-rate links from small deep-space probes with very little link loss due to inclement weather. We have reviewed past JPL-funded work on RF and optical relay satellites, and on proposed clustered and linearly dispersed optical subnets. Cost comparisons show that the life cycle costs of a 7-m optical relay station based on the heritage of the Next Generation Space Telescope is comparable to that of an 8-station subnet of 10-m optical ground stations. This makes the relay link an attractive option vis-a-vis a ground station network.

Effects of two-photon absorption on all optical logic operation based on quantum-dot semiconductor optical amplifiers

Science.gov (United States)

Zhang, Xiang; Dutta, Niloy K.

2018-01-01

We investigate all-optical logic operation in quantum-dot semiconductor optical amplifier (QD-SOA) based Mach-Zehnder interferometer considering the effects of two-photon absorption (TPA). TPA occurs during the propagation of sub-picosecond pulses in QD-SOA, which leads to a change in carrier recovery dynamics in quantum-dots. We utilize a rate equation model to take into account carrier refill through TPA and nonlinear dynamics including carrier heating and spectral hole burning in the QD-SOA. The simulation results show the TPA-induced pumping in the QD-SOA can reduce the pattern effect and increase the output quality of the all-optical logic operation. With TPA, this scheme is suitable for high-speed Boolean logic operation at 320 Gb/s.

LES VARIANTES LEXICALES POUR LE MOT ESPADRILLES AU PARANÁ ET DANS LA RÉGION NORD-EST DU BRÉSIL: UNE ETUDE ETHNOLINGUISTIQUE

Directory of Open Access Journals (Sweden)

Maranúbia Pereira Barbosa Doiron

2014-03-01

Full Text Available : Cette étude concerne les variantes lexicales pour le mot espadrilles dans l’Etat du Paraná et dans la région Nord-Est du Brésil, sous un regard ethnolinguistique. Le corpus est composé par les donnés obtenues à partir de la question numéro 276 du Questionnaire Semantique-Lexical de l’Atlas Linguistique du Paraná (ALPR, dont l’auteur est le professeur Vanderci de Andrade Aguilera (1994, de l’Université de l’Etat de Londrina, autant que les variantes lexicales pour le mot espadrilles trouvées dans deux ouvrages littéraires d’auteurs originaires du Nord-Est du Brésil – Fogo Morto, de José Lins do Rego (2009 et Vidas Secas, de Graciliano Ramos (1969. Dans ces livres, les espadrilles jouent un rôle fondamental, tout en reflétant son importance dans le vestiaire de cette région, du moins jusqu’à moitié du XXème siècle. On rechercha des éventuelles ressemblances ou différences existentes entre les variantes lexicales de la chaussure mentionnée par les informateurs “paranaenses” et le modèle cité dans les ouvrages des écrivains Rego et Ramos. Dans les deuxs sources – la linguistique et la littéraire – on privilégia l’analyse semantique des unités lexicales et le contexte dans lequel elles ont été enregistrées. L’étude démontra que l’unité lexicale espadrilles et ses variantes phonétiques similaires dans les deux corpora, aussi que les variantes lexicales populaires présentes dans l’Atlas Linguistique du Paraná (ALPR. En dépit des simitudes l’esthétique et la fonction des espadrilles ne sont pas les mêmes dans les localitées concernées.

LES VARIANTES LEXICALES POUR LE MOT ESPADRILLES AU PARANÁ ET DANS LA RÉGION NORD-EST DU BRÉSIL: UNE ETUDE ETHNOLINGUISTIQUE

Directory of Open Access Journals (Sweden)

Vanderci de Andrade AGUILERA

2013-12-01

Full Text Available Cette étude concerne les variantes lexicales pour le mot espadrilles dans l’Etat du Paraná et dans la région Nord-Est du Brésil, sous un regard ethnolinguistique. Le corpus est composé par les donnés obtenues à partir de la question numéro 276 du Questionnaire Semantique-Lexical de l’Atlas Linguistique du Paraná (ALPR, dont l’auteur est le professeur Vanderci de Andrade Aguilera (1994, de l’Université de l’Etat de Londrina, autant que les variantes lexicales pour le mot espadrilles trouvées dans deux ouvrages littéraires d’auteurs originaires du Nord-Est du Brésil – Fogo Morto, de José Lins do Rego (2009 et Vidas Secas, de Graciliano Ramos (1969. Dans ces livres, les espadrilles jouent un rôle fondamental, tout en reflétant son importance dans le vestiaire de cette région, du moins jusqu’à moitié du XXème siècle. On rechercha des éventuelles ressemblances ou différences existentes entre les variantes lexicales de la chaussure mentionnée par les informateurs “paranaenses” et le modèle cité dans les ouvrages des écrivains Rego et Ramos. Dans les deuxs sources – la linguistique et la littéraire – on privilégia l’analyse semantique des unités lexicales et le contexte dans lequel elles ont été enregistrées. L’étude démontra que l’unité lexicale espadrilles et ses variantes phonétiques similaires dans les deux corpora, aussi que les variantes lexicales populaires présentes dans l’Atlas Linguistique du Paraná (ALPR. En dépit des simitudes l’esthétique et la fonction des espadrilles ne sont pas les mêmes dans les localitées concernées.

Bit-rate-transparent optical RZ-to-NRZ format conversion based on linear spectral phase filtering

DEFF Research Database (Denmark)

Maram, Reza; Da Ros, Francesco; Guan, Pengyu

2017-01-01

We propose a novel and strikingly simple design for all-optical bit-rate-transparent RZ-to-NRZ conversion based on optical phase filtering. The proposed concept is experimentally validated through format conversion of a 640 Gbit/s coherent RZ signal to NRZ signal.......We propose a novel and strikingly simple design for all-optical bit-rate-transparent RZ-to-NRZ conversion based on optical phase filtering. The proposed concept is experimentally validated through format conversion of a 640 Gbit/s coherent RZ signal to NRZ signal....

Development of evanescent wave absorbance-based fibre-optic ...

Indian Academy of Sciences (India)

potential human health risk and may lead to death in young children and adults ... tive measures for disease outbreak are necessary, because of the recent biothreat, ... optical fibres in chemical sensing and biosensing are reviewed in detail in [12–19]. ... systematic development of these evanescent wave absorbance-based ...

Event-Based Corpuscular Model for Quantum Optics Experiments

NARCIS (Netherlands)

Michielsen, K.; Jin, F.; Raedt, H. De

A corpuscular simulation model of optical phenomena that does not require the knowledge of the solution of a wave equation of the whole system and reproduces the results of Maxwell's theory by generating detection events one-by-one is presented. The event-based corpuscular model is shown to give a

Single-pulse CARS based multimodal nonlinear optical microscope for bioimaging.

Science.gov (United States)

Kumar, Sunil; Kamali, Tschackad; Levitte, Jonathan M; Katz, Ori; Hermann, Boris; Werkmeister, Rene; Považay, Boris; Drexler, Wolfgang; Unterhuber, Angelika; Silberberg, Yaron

2015-05-18

Noninvasive label-free imaging of biological systems raises demand not only for high-speed three-dimensional prescreening of morphology over a wide-field of view but also it seeks to extract the microscopic functional and molecular details within. Capitalizing on the unique advantages brought out by different nonlinear optical effects, a multimodal nonlinear optical microscope can be a powerful tool for bioimaging. Bringing together the intensity-dependent contrast mechanisms via second harmonic generation, third harmonic generation and four-wave mixing for structural-sensitive imaging, and single-beam/single-pulse coherent anti-Stokes Raman scattering technique for chemical sensitive imaging in the finger-print region, we have developed a simple and nearly alignment-free multimodal nonlinear optical microscope that is based on a single wide-band Ti:Sapphire femtosecond pulse laser source. Successful imaging tests have been realized on two exemplary biological samples, a canine femur bone and collagen fibrils harvested from a rat tail. Since the ultra-broad band-width femtosecond laser is a suitable source for performing high-resolution optical coherence tomography, a wide-field optical coherence tomography arm can be easily incorporated into the presented multimodal microscope making it a versatile optical imaging tool for noninvasive label-free bioimaging.

Biomedical and sensing applications of a multi-mode biodegradable phosphate-based optical fiber

Science.gov (United States)

Podrazky, Ondřej; Peterka, Pavel; Vytykáčová, SoÅa.; Proboštová, Jana; Kuneš, Martin; Lyutakov, Oleksiy; Ceci-Ginistrelli, Edoardo; Pugliese, Diego; Boetti, Nadia G.; Janner, Davide; Milanese, Daniel

2018-02-01

We report on the employment of a biodegradable phosphate-based optical fiber as a pH sensing probe in physiological environment. The phosphate-based optical fiber preform was fabricated by the rod-in-tube technique. The fiber biodegradability was first tested in-vitro and then its biodegradability and toxicity were tested in-vivo. Optical probes for pH sensing were prepared by the immobilization of a fluorescent dye on the fiber tip by a sol-gel method. The fluorescence response of the pH-sensor was measured as a ratio of the emission intensities at the excitation wavelengths of 405 and 450 nm.

Fiber Optic Chemical Nanosensors Based on Engineered Single-Walled Carbon Nanotubes

Directory of Open Access Journals (Sweden)

M. Consales

2008-01-01

Full Text Available In this contribution, a review of the development of high-performance optochemical nanosensors based on the integration of carbon nanotubes with the optical fiber technology is presented. The paper first provide an overview of the amazing features of carbon nanotubes and their exploitation as highly adsorbent nanoscale materials for gas sensing applications. Successively, the attention is focused on the operating principle, fabrication, and characterization of fiber optic chemosensors in the Fabry-Perot type reflectometric configuration, realized by means of the deposition of a thin layer of single-walled carbon nanotubes (SWCNTs upon the distal end of standard silica optical fibers. This is followed by an extensive review of the excellent sensing capabilities of the realized SWCNTs-based chemical nanosensors against volatile organic compounds and other pollutants in different environments (air and water and operating conditions (room temperature and cryogenic temperatures. The experimental results reported here reveal that ppm and sub-ppm chemical detection limits, low response times, as well as fast and complete recovery of the sensor responses have been obtained in most of the investigated cases. This evidences the great potentialities of the proposed photonic nanosensors based on SWCNTs to be successfully employed for practical environmental monitoring applications both in liquid and vapor phase as well as for space. Furthermore, the use of novel SWCNTs-based composites as sensitive fiber coatings is proposed to enhance the sensing performance and to improve the adhesion of carbon nanotubes to the fiber surface. Finally, new advanced sensing configurations based on the use of hollow-core optical fibers coated and partially filled by carbon nanotubes are also presented.

Optical Fiber Sensors Based on Fiber Ring Laser Demodulation Technology.

Science.gov (United States)

Xie, Wen-Ge; Zhang, Ya-Nan; Wang, Peng-Zhao; Wang, Jian-Zhang

2018-02-08

A review for optical fiber sensors based on fiber ring laser (FRL) demodulation technology is presented. The review focuses on the principles, main structures, and the sensing performances of different kinds of optical fiber sensors based on FRLs. First of all, the theory background of the sensors has been discussed. Secondly, four different types of sensors are described and compared, which includes Mach-Zehnder interferometer (MZI) typed sensors, Fabry-Perot interferometer (FPI) typed sensors, Sagnac typed sensors, and fiber Bragg grating (FBG) typed sensors. Typical studies and main properties of each type of sensors are presented. Thirdly, a comparison of different types of sensors are made. Finally, the existing problems and future research directions are pointed out and analyzed.

Stable integrated hyper-parametric oscillator based on coupled optical microcavities.

Science.gov (United States)

Armaroli, Andrea; Feron, Patrice; Dumeige, Yannick

2015-12-01

We propose a flexible scheme based on three coupled optical microcavities that permits us to achieve stable oscillations in the microwave range, the frequency of which depends only on the cavity coupling rates. We find that the different dynamical regimes (soft and hard excitation) affect the oscillation intensity, but not their periods. This configuration may permit us to implement compact hyper-parametric sources on an integrated optical circuit with interesting applications in communications, sensing, and metrology.

Distributed fiber optic interferometric geophone system based on draw tower gratings

Science.gov (United States)

Xu, Ruquan; Guo, Huiyong; Liang, Lei

2017-09-01

A distributed fiber optic interferometric geophone array based on draw tower grating (DTG) array is proposed. The DTG geophone array is made by the DTG array fabricated based on a near-contact exposure through a phase mask during the fiber drawing process. A distributed sensing system with 96 identical DTGs in an equal separation of 20 m and an unbalanced Michelson interferometer for vibration measurement has been experimentally validated compared with a moving-coil geophone. The experimental results indicate that the sensing system can linearly demodulate the phase shift. Compared with the moving coil geophone, the fiber optic sensing system based on DTG has higher signal-to-noise ratio at low frequency.

Characteristic Analysis Light Intensity Sensor Based On Plastic Optical Fiber At Various Configuration

Science.gov (United States)

Arifin, A.; Lusiana; Yunus, Muhammad; Dewang, Syamsir

2018-03-01

This research discusses the light intensity sensor based on plastic optical fiber. This light intensity sensor is made of plastic optical fiber consisting of two types, namely which is cladding and without cladding. Plastic optical fiber used multi-mode step-index type made of polymethyl metacrylate (PMMA). The infrared LED emits light into the optical fiber of the plastic and is subsequently received by the phototransistor to be converted to an electric voltage. The sensor configuration is made with three models: straight configuration, U configuration and gamma configuration with cladding and without cladding. The measured light source uses a 30 Watt high power LED with a light intensity of 0 to 10 Klux. The measured light intensity will affect the propagation of light inside the optical fiber sensor. The greater the intensity of the measured light, the greater the output voltage that is read on the computer. The results showed that the best optical fiber sensor characteristics were obtained in U configuration. Sensors with U-configuration without cladding had the best sensitivity and resolution values of 0.0307 volts/Klux and 0.0326 Klux. The advantages of this measuring light intensity based on the plastic optical fiber instrument are simple, easy-to-make operational systems, low cost, high sensitivity and resolution.

Semiconductor optical amplifier-based heterodyning detection for resolving optical terahertz beat-tone signals from passively mode-locked semiconductor lasers

International Nuclear Information System (INIS)

Latkowski, Sylwester; Maldonado-Basilio, Ramon; Carney, Kevin; Parra-Cetina, Josue; Philippe, Severine; Landais, Pascal

2010-01-01

An all-optical heterodyne approach based on a room-temperature controlled semiconductor optical amplifier (SOA) for measuring the frequency and linewidth of the terahertz beat-tone signal from a passively mode-locked laser is proposed. Under the injection of two external cavity lasers, the SOA acts as a local oscillator at their detuning frequency and also as an optical frequency mixer whose inputs are the self-modulated spectrum of the device under test and the two laser beams. Frequency and linewidth of the intermediate frequency signal (and therefore, the beat-tone signal) are resolved by using a photodiode and an electrical spectrum analyzer.

Optical indicators based on environment sensitive fluorophors

Energy Technology Data Exchange (ETDEWEB)

Shakhsher, Z.M.; Seitz, W.R. (Univ. of New Hampshire, Durham, NC (USA))

1990-01-01

The authors are interested in the development of optical indicators based on environment sensitive fluorophors. The fluorophor is immobilized on a solid substrate. Interaction with analyte modifies the fluorophor environment, leading to a shift in the distribution of emission wavelengths. Because the indicator is based on spectral shift, it is possible to relate analyte concentration to a ratio of intensities at two different wavelengths. This parameter is insensitive to instrumental drift and slow loss of indicator. Two indicator systems have been investigated. Both involve dansyl derivation, i.e., derivatives of 5-dimethylamino-1-naphthalene sulfonic acid.

High-speed VCSEL-based optical interconnects

Science.gov (United States)

Ishak, Waguih S.

2001-11-01

Vertical Cavity Surface Emitting Lasers (VCSEL) have made significant inroads into commercial realization especially in the area of data communications. Single VCSEL devices are key components in Gb Ethernet Transceivers. A multi-element VCSEL array is the key enabling technology for high-speed multi Gb/s parallel optical interconnect modules. In 1996, several companies introduced a new generation of fiber optic products based VCSEL technology such as multimode fiber transceivers for the ANSI Fiber Channel and Gigabit Ethernet IEEE 802.3 standards. VCSELs offer unique advantages over its edge-emitting counterparts in several areas. These include low-cost (LED-like) manufacturability, low current operation and array integrability. As data rates continue to increase, VCSELs offer the advantage of being able to provide the highest modulation bandwidth per milliamp of modulation current. Currently, most of the VCSEL-based products use short (780 - 980 nm) wavelength lasers. However, significant research efforts are taking place at universities and industrial research labs around the world to develop reliable, manufacturable and high-power long (1300 - 1550 nm) wavelength VCSELs. These lasers will allow longer (several km) transmission distances and will help alleviate some of the eye-safety issues. Perhaps, the most important advantage of VCSELs is the ability to form two-dimensional arrays much easier than in the case of edge-emitting lasers. These arrays (single and two-dimensional) will allow a whole new family of applications, specifically in very high-speed computer and switch interconnects.

Artificial Neural Network Based Optical Character Recognition

OpenAIRE

Vivek Shrivastava; Navdeep Sharma

2012-01-01

Optical Character Recognition deals in recognition and classification of characters from an image. For the recognition to be accurate, certain topological and geometrical properties are calculated, based on which a character is classified and recognized. Also, the Human psychology perceives characters by its overall shape and features such as strokes, curves, protrusions, enclosures etc. These properties, also called Features are extracted from the image by means of spatial pixel-...

Photoprotection in Plants Optical Screening-based Mechanisms

CERN Document Server

Solovchenko, Alexei

2010-01-01

Optical screening of excessive and potentially harmful solar radiation is an important photoprotective mechanism, though it has received much less attention in comparison with other systems preventing photooxidative damage to photoautotrophic organisms. This photoprotection in the form of screening appears to be especially important for juvenile and senescing plants as well as under environmental stresses—i.e. in situations where the efficiency of enzymatic ROS elimination, DNA repair and other ‘classical’ photoprotective systems could be impaired. This book represents an attempt to develop an integral view of optical screening-based photoprotection in microalgae and higher plants. Towards this end, the key groups of pigments involved in the screening of ultraviolet and visible components of solar radiation in microalgae and higher plants, and the patterns of their accumulation and distribution within plant cells and tissues, are described. Special attention is paid to the manifestations of screening pi...

Cross layer optimization for cloud-based radio over optical fiber networks

Science.gov (United States)

Shao, Sujie; Guo, Shaoyong; Qiu, Xuesong; Yang, Hui; Meng, Luoming

2016-07-01

To adapt the 5G communication, the cloud radio access network is a paradigm introduced by operators which aggregates all base stations computational resources into a cloud BBU pool. The interaction between RRH and BBU or resource schedule among BBUs in cloud have become more frequent and complex with the development of system scale and user requirement. It can promote the networking demand among RRHs and BBUs, and force to form elastic optical fiber switching and networking. In such network, multiple stratum resources of radio, optical and BBU processing unit have interweaved with each other. In this paper, we propose a novel multiple stratum optimization (MSO) architecture for cloud-based radio over optical fiber networks (C-RoFN) with software defined networking. Additionally, a global evaluation strategy (GES) is introduced in the proposed architecture. MSO can enhance the responsiveness to end-to-end user demands and globally optimize radio frequency, optical spectrum and BBU processing resources effectively to maximize radio coverage. The feasibility and efficiency of the proposed architecture with GES strategy are experimentally verified on OpenFlow-enabled testbed in terms of resource occupation and path provisioning latency.

All-optical optoacoustic microscopy based on probe beam deflection technique

Directory of Open Access Journals (Sweden)

Saher M. Maswadi

2016-09-01

Full Text Available Optoacoustic (OA microscopy using an all-optical system based on the probe beam deflection technique (PBDT for detection of laser-induced acoustic signals was investigated as an alternative to conventional piezoelectric transducers. PBDT provides a number of advantages for OA microscopy including (i efficient coupling of laser excitation energy to the samples being imaged through the probing laser beam, (ii undistorted coupling of acoustic waves to the detector without the need for separation of the optical and acoustic paths, (iii high sensitivity and (iv ultrawide bandwidth. Because of the unimpeded optical path in PBDT, diffraction-limited lateral resolution can be readily achieved. The sensitivity of the current PBDT sensor of 22 μV/Pa and its noise equivalent pressure (NEP of 11.4 Pa are comparable with these parameters of the optical micro-ring resonator and commercial piezoelectric ultrasonic transducers. Benefits of the present prototype OA microscope were demonstrated by successfully resolving micron-size details in histological sections of cardiac muscle.

All-optical optoacoustic microscopy based on probe beam deflection technique.

Science.gov (United States)

Maswadi, Saher M; Ibey, Bennett L; Roth, Caleb C; Tsyboulski, Dmitri A; Beier, Hope T; Glickman, Randolph D; Oraevsky, Alexander A

2016-09-01

Optoacoustic (OA) microscopy using an all-optical system based on the probe beam deflection technique (PBDT) for detection of laser-induced acoustic signals was investigated as an alternative to conventional piezoelectric transducers. PBDT provides a number of advantages for OA microscopy including (i) efficient coupling of laser excitation energy to the samples being imaged through the probing laser beam, (ii) undistorted coupling of acoustic waves to the detector without the need for separation of the optical and acoustic paths, (iii) high sensitivity and (iv) ultrawide bandwidth. Because of the unimpeded optical path in PBDT, diffraction-limited lateral resolution can be readily achieved. The sensitivity of the current PBDT sensor of 22 μV/Pa and its noise equivalent pressure (NEP) of 11.4 Pa are comparable with these parameters of the optical micro-ring resonator and commercial piezoelectric ultrasonic transducers. Benefits of the present prototype OA microscope were demonstrated by successfully resolving micron-size details in histological sections of cardiac muscle.

DMD-based LED-illumination super-resolution and optical sectioning microscopy.

Science.gov (United States)

Dan, Dan; Lei, Ming; Yao, Baoli; Wang, Wen; Winterhalder, Martin; Zumbusch, Andreas; Qi, Yujiao; Xia, Liang; Yan, Shaohui; Yang, Yanlong; Gao, Peng; Ye, Tong; Zhao, Wei

2013-01-01

Super-resolution three-dimensional (3D) optical microscopy has incomparable advantages over other high-resolution microscopic technologies, such as electron microscopy and atomic force microscopy, in the study of biological molecules, pathways and events in live cells and tissues. We present a novel approach of structured illumination microscopy (SIM) by using a digital micromirror device (DMD) for fringe projection and a low-coherence LED light for illumination. The lateral resolution of 90 nm and the optical sectioning depth of 120 μm were achieved. The maximum acquisition speed for 3D imaging in the optical sectioning mode was 1.6×10(7) pixels/second, which was mainly limited by the sensitivity and speed of the CCD camera. In contrast to other SIM techniques, the DMD-based LED-illumination SIM is cost-effective, ease of multi-wavelength switchable and speckle-noise-free. The 2D super-resolution and 3D optical sectioning modalities can be easily switched and applied to either fluorescent or non-fluorescent specimens.

Demonstration of glass-based photonic interposer for mid-board-optical engines and electrical-optical circuit board (EOCB) integration strategy

Science.gov (United States)

Schröder, H.; Neitz, M.; Schneider-Ramelow, M.

2018-02-01

Due to its optical transparency and superior dielectric properties glass is regarded as a promising candidate for advanced applications as active photonic interposer for mid-board-optics and optical PCB waveguide integration. The concepts for multi-mode and single-mode photonic system integration are discussed and related demonstration project results will be presented. A hybrid integrated photonic glass body interposer with integrated optical lenses for multi-mode data communication wavelength of 850 nm have been realized. The paper summarizes process developments which allow cost efficient metallization of TGV. Electro-optical elements like photodiodes and VCSELs can be directly flip-chip mounted on the glass substrate according to the desired lens positions. Furthermore results for a silicon photonic based single-mode active interposer integration onto a single mode glass made EOCB will be compared in terms of packaging challenges. The board level integration strategy for both of these technological approaches and general next generation board level integration concepts for photonic interposer will be introductorily discussed.

Respiration rate detection based on intensity modulation using plastic optical fiber

Science.gov (United States)

Anwar, Zawawi Mohd; Ziran Nurul Sufia, Nor; Hadi, Manap

2017-11-01

This paper presents the implementation of respiration rate measurement via a simple intensity-based optical fiber sensor using optical fiber technology. The breathing rate is measured based on the light intensity variation due to the longitudinal gap changes between two separated fibers. In order to monitor the breathing rate continuously, the output from the photodetector conditioning circuit is connected to a low-cost Arduino kit. At the sensing point, two optical fiber cables are positioned in series with a small gap and fitted inside a transparent plastic tube. To ensure smooth movement of the fiber during inhale and exhale processes as well as to maintain the gap of the fiber during idle condition, the fiber is attached firmly to a stretchable bandage. This study shows that this simple fiber arrangement can be applied to detect respiration activity which might be critical for patient monitoring.

Respiration rate detection based on intensity modulation using plastic optical fiber

Directory of Open Access Journals (Sweden)

Mohd Anwar Zawawi

2017-01-01

Full Text Available This paper presents the implementation of respiration rate measurement via a simple intensity-based optical fiber sensor using optical fiber technology. The breathing rate is measured based on the light intensity variation due to the longitudinal gap changes between two separated fibers. In order to monitor the breathing rate continuously, the output from the photodetector conditioning circuit is connected to a low-cost Arduino kit. At the sensing point, two optical fiber cables are positioned in series with a small gap and fitted inside a transparent plastic tube. To ensure smooth movement of the fiber during inhale and exhale processes as well as to maintain the gap of the fiber during idle condition, the fiber is attached firmly to a stretchable bandage. This study shows that this simple fiber arrangement can be applied to detect respiration activity which might be critical for patient monitoring.

Electro-optical logic gates based on graphene-silicon waveguides

Science.gov (United States)

Chen, Weiwei; Yang, Longzhi; Wang, Pengjun; Zhang, Yawei; Zhou, Liqiang; Yang, Tianjun; Wang, Yang; Yang, Jianyi

2016-08-01

In this paper, designs of electro-optical AND/NAND, OR/ NOR, XOR/XNOR logic gates based on cascaded silicon graphene switches and regular 2×1 multimode interference combiners are presented. Each switch consists of a Mach-Zehnder interferometer in which silicon slot waveguides embedded with graphene flakes are designed for phase shifters. High-speed switching function is achieved by applying an electrical signal to tune the Fermi levels of graphene flakes causing the variation of modal effective index. Calculation results show the crosstalk in the proposed optical switch is lower than -22.9 dB within a bandwidth from 1510 nm to 1600 nm. The designed six electro-optical logic gates with the operation speed of 10 Gbit/s have a minimum extinction ratio of 35.6 dB and a maximum insertion loss of 0.21 dB for transverse electric modes at 1.55 μm.

Design and performance evaluation of an OpenFlow-based control plane for software-defined elastic optical networks with direct-detection optical OFDM (DDO-OFDM) transmission.

Science.gov (United States)

Liu, Lei; Peng, Wei-Ren; Casellas, Ramon; Tsuritani, Takehiro; Morita, Itsuro; Martínez, Ricardo; Muñoz, Raül; Yoo, S J B

2014-01-13

Optical Orthogonal Frequency Division Multiplexing (O-OFDM), which transmits high speed optical signals using multiple spectrally overlapped lower-speed subcarriers, is a promising candidate for supporting future elastic optical networks. In contrast to previous works which focus on Coherent Optical OFDM (CO-OFDM), in this paper, we consider the direct-detection optical OFDM (DDO-OFDM) as the transport technique, which leads to simpler hardware and software realizations, potentially offering a low-cost solution for elastic optical networks, especially in metro networks, and short or medium distance core networks. Based on this network scenario, we design and deploy a software-defined networking (SDN) control plane enabled by extending OpenFlow, detailing the network architecture, the routing and spectrum assignment algorithm, OpenFlow protocol extensions and the experimental validation. To the best of our knowledge, it is the first time that an OpenFlow-based control plane is reported and its performance is quantitatively measured in an elastic optical network with DDO-OFDM transmission.

Micro- and nanostructured sol-gel-based materials for optical chemical sensing (2005–2015)

International Nuclear Information System (INIS)

Barczak, Mariusz; McDonagh, Colette; Wencel, Dorota

2016-01-01

This review (with 172 references) highlights the progress made in the past 10 years in silica sol-gel-based materials for use in optical chemical sensing. Following an introduction, the processes leading to the sol-gel-based and ormosil materials, their printability and methods for characterisation are discussed. Then various classes of optical sensors, with a focus on sensors for pH values, oxygen, carbon dioxide, ammonia (also in dissolved form), and heavy metal ions are described. A further section covers nanoparticle-based optical sensors mainly for use in intracellular sensing of the above species. Recent developments in this area are also emphasised and future trends discussed. (author)

Multifunctional fiber-optic microwave links based on remote heterodyne detection

DEFF Research Database (Denmark)

Gliese, Ulrik Bo; Nielsen, Torben Nørskov; Nielsen, Søren Nørskov

1998-01-01

The multifunctionality of microwave links based on remote heterodyne detection (RHD) of signals from a dual-frequency laser transmitter is discussed and experimentally demonstrated in this paper. Typically, direct detection (DD) in conjunction with optical intensity modulation is used to implement...... fiber-optic microwave links. The resulting links are inherently transparent. As opposed to DD links, RHD links can perform radio-system functionalities such as modulation and frequency conversion in addition to transparency. All of these three functionalities are presented and experimentally...

Dynamic optical tweezers based assay for monitoring early drug resistance

International Nuclear Information System (INIS)

Wu, Xiaojing; Zhu, Siwei; Feng, Jie; Zhang, Yuquan; Min, Changjun; Yuan, X-C

2013-01-01

In this letter, a dynamic optical tweezers based assay is proposed and investigated for monitoring early drug resistance with Pemetrexed-resistant non-small cell lung cancer (NSCLC) cell lines. The validity and stability of the method are verified experimentally in terms of the physical parameters of the optical tweezers system. The results demonstrate that the proposed technique is more convenient and faster than traditional techniques when the capability of detecting small variations of the response of cells to a drug is maintained. (letter)

Ambassadeur du Royaume-Uni de Portugal et Brésil à Washington, 1816-20

Directory of Open Access Journals (Sweden)

Francisco Iglésias

1977-09-01

Full Text Available BOURDON, Léon. José Corrêa da Serra. Ambassadeur du Royaume-Uni de Portugal et Brésil à Washington, 1816-20. Paris: Fundação Calouste Gulbenkian. Centro Cultural Português. 1975. (primeiro parágrafo do texto Afirmar que a série "A evolução da humanidade" tem dado, desde sua fundação, por Henri Berr, contribuição das mais expressivas para o estudo da História, é, um truísmo. As dezenas de títulos já publicados constituem-se em prova substantiva, eliminando a necessidade de qualquer adjetivação. A chamada História Judaica tem sido privilegiada na coleção. As obras de Lods e de Guignebert, notadamente Israel, das origens até meados do século VIII, do primeiro, já ultrapassaram os estreitos limites do mundo acadêmico, para adquirirem o status de leitura indispensável para qualquer interessado no tema. Rigorosamente, a obra de Feuerwerker, não pode ser colocada lado a lado com as acima referidas. Dificilmente poderíamos classificá-la como obra de síntese — pelo menos de grande síntese. Pelo contrário, é um trabalho de minuciosa elaboração, fruto de longa pesquisa documental e centrada num tema específico.

Effects of climatic factors, drought risk and irrigation requirement on maize yield in the Northeast Farming Region of China

DEFF Research Database (Denmark)

Yin, Xiaogang; Jabloun, Mohamed; Olesen, Jørgen Eivind

2016-01-01

Drought risk is considered to be among the main limiting factors for maize (Zea mays L.) production in the Northeast Farming Region of China (NFR). Maize yield data from 44 stations over the period 1961–2010 were combined with data from weather stations to evaluate the effects of climatic factors...... drought and intense rainfall illustrate the importance of further development of irrigation and drainage systems for ensuring the stability of maize production in NFR....

Cost-Effective Magnetoencephalography Based on Time Encoded Optical Fiber Interferometry for Epilepsy and Tinnitus

Science.gov (United States)

2016-09-01

respectively. A length of dispersive fiber and a computer are used to first “decode” the optical interference signal into dispersed optical wave-packet...AWARD NUMBER: W81XWH-15-1-0008 TITLE: Cost-Effective Magnetoencephalography Based on Time-Encoded Optical Fiber Interferometry for Epilepsy...10 Dec 2014 - 9 Jun 2016 4. TITLE AND SUBTITLE 5a.16 CONTRACT NUMBER Encoded Optical Fiber Interferometry for Epilepsy and Tinnitus Diagnosis 5b

Towards development of a fiber optic-based transmission monitoring system

Science.gov (United States)

Baldwin, Chris S.; Kiddy, Jason S.; Samuel, Paul D.

2011-06-01

There is interest in the rotorcraft community to develop health monitoring technologies. Among these technologies is the ability to monitor the transmission planetary gear system. The gearbox environment does not lend itself to traditional sensing technologies due to the harsh environment and crowed space. Traditional vibration-based diagnostics are based on the output from externally mounted sensors, usually accelerometers fixed to the gearbox exterior. This type of system relies on the ability of the vibration signal to travel from the gears through the gearbox housing. These sensors are also susceptible to other interference including electrical magnetic interference (EMI). For these reasons, the development of a fiber optic-based transmission monitoring system represents an appealing alternative to the accelerometer due to their resistance to EMI and other signal corrupting influences. Aither Engineering has been working on integrating the fiber optic sensors into the gearbox environment to measure strain on the ring gear of the planetary gear system. This application utilizes a serial array of wavelength division multiplexed fiber Bragg grating (FBG) sensors. Work in this area has been conducted at both the University of Maryland, College Park and more recently at the NASA Glenn Research Center (NGRC) OH-58 transmission test rig facility. This paper discusses some of the testing results collected from the fiber optic ring gear sensor array. Based on these results, recommendations for system requirements are addressed in terms of the capabilities of the FBG instrumentation.

Optical polarization based logic functions (XOR or XNOR) with nonlinear Gallium nitride nanoslab.

Science.gov (United States)

Bovino, F A; Larciprete, M C; Giardina, M; Belardini, A; Centini, M; Sibilia, C; Bertolotti, M; Passaseo, A; Tasco, V

2009-10-26

We present a scheme of XOR/XNOR logic gate, based on non phase-matched noncollinear second harmonic generation from a medium of suitable crystalline symmetry, Gallium nitride. The polarization of the noncollinear generated beam is a function of the polarization of both pump beams, thus we experimentally investigated all possible polarization combinations, evidencing that only some of them are allowed and that the nonlinear interaction of optical signals behaves as a polarization based XOR. The experimental results show the peculiarity of the nonlinear optical response associated with noncollinear excitation, and are explained using the expression for the effective second order optical nonlinearity in noncollinear scheme.

Optical Fiber-Tip Sensors Based on In-Situ µ-Printed Polymer Suspended-Microbeams.

Science.gov (United States)

Yao, Mian; Ouyang, Xia; Wu, Jushuai; Zhang, A Ping; Tam, Hwa-Yaw; Wai, P K A

2018-06-05

Miniature optical fiber-tip sensors based on directly µ-printed polymer suspended-microbeams are presented. With an in-house optical 3D μ-printing technology, SU-8 suspended-microbeams are fabricated in situ to form Fabry⁻Pérot (FP) micro-interferometers on the end face of standard single-mode optical fiber. Optical reflection spectra of the fabricated FP micro-interferometers are measured and fast Fourier transform is applied to analyze the cavity of micro-interferometers. The applications of the optical fiber-tip sensors for refractive index (RI) sensing and pressure sensing, which showed 917.3 nm/RIU to RI change and 4.29 nm/MPa to pressure change, respectively, are demonstrated in the experiments. The sensors and their optical µ-printing method unveil a new strategy to integrate complicated microcomponents on optical fibers toward 'lab-on-fiber' devices and applications.

Optic neuropathy following combined proton and photon radiotherapy for base of skull tumors

International Nuclear Information System (INIS)

Kim, June; Munzenrider, John; Maas, Alicea; Finkelstein, Dianne; Liebsch, Norbert; Hug, Eugen; Suit, Herman; Smith, Al; Goitein, Michael

1997-01-01

Purpose/Objective: To evaluate the risk of radiation injury to the optic pathway following high dose radiation therapy (RT) for base of skull tumors with regard to the following variables: diabetes, hypertension, number of surgical procedures, use of patch, patch distance, radiation dose, and volume of optic structures receiving 50, 55, or 60 Cobalt Gray Equivalent (CGE). Materials and Methods: A total of 359 patients with base of skull chordoma or low grade chondrosarcoma received high dose radiation therapy. Patients were treated with external beam radiotherapy utilizing protons alone or combined protons and photons. Protons of 160 MeV were delivered at the Harvard Cyclotron Laboratory using a modulated Bragg peak. The tumor dose ranged from 61 to 76 CGE. CGE was used because modulated protons have an RBE of 1.1 compared to 60 Co. Among 359 patients, 85 patients were excluded from evaluation based on age, tumor location, and pre-RT treatment criteria. All 274 evaluable patients had a minimum follow up of 12 months. Medical records were reviewed to determine the actual cause of vision changes. A total of 12 patients with grade II, III, and IV radiation-induced optic neuropathy were identified. Twenty-four patients without complications who closely matched the aforementioned 12 cases with optic neuropathy were selected from the 274 patients as a control group. Dose volume histograms of 12 cases and 24 controls were reviewed to determine minimum, median, and maximum dose to the optic apparatus as well as dose volume at 50, 55, and 60 CGE. Other information regarding remaining potential risk factors, such as diabetes, hypertension, number of surgical procedures, use of patch, and patch distance, was also obtained. Results: A total of 12 patients (4.4%) developed radiation-induced optic neuropathy: 1 grade II, 9 grade III, and 2 grade IV. Specific sites of involvement were left optic nerve in 9, right optic nerve in 5, and chiasm in 4 cases. The duration to the onset

Porous silicon based micro-opto-electro-mechanical-systems (MOEMS) components for free space optical interconnects

Science.gov (United States)

Song, Da

2008-02-01

One of the major challenges confronting the current integrated circuits (IC) industry is the metal "interconnect bottleneck". To overcome this obstacle, free space optical interconnects (FSOIs) can be used to address the demand for high speed data transmission, multi-functionality and multi-dimensional integration for the next generation IC. One of the crucial elements in FSOIs system is to develop a high performance and flexible optical network to transform the incoming optical signal into a distributed set of optical signals whose direction, alignment and power can be independently controlled. Among all the optical materials for the realization of FSOI components, porous silicon (PSi) is one of the most promising candidates because of its unique optical properties, flexible fabrication methods and integration with conventional IC material sets. PSi-based Distributed Bragg Reflector (DBR) and Fabry-Perot (F-P) structures with unique optical properties are realized by electrochemical etching of silicon. By incorporating PSi optical structures with Micro-Opto-Electro-Mechanical-Systems (MOEMS), several components required for FSOI have been developed. The first type of component is the out-of-plane freestanding optical switch. Implementing a PSi DBR structure as an optically active region, the device can realize channel selection by changing the tilting angle of the micromirror supported by the thermal bimorph actuator. All the fabricated optical switches have reached kHz working frequency and life time of millions of cycles. The second type of component is the in-plane tunable optical filter. By introducing PSi F-P structure into the in-plane PSi film, a thermally tunable optical filter with a sensitivity of 7.9nm/V has been realized for add/drop optical signal selection. Also, for the first time, a new type of PSi based reconfigurable diffractive optical element (DOE) has been developed. By using patterned photoresist as a protective mask for electrochemical

Optical conductivity of iron-based superconductors

International Nuclear Information System (INIS)

Charnukha, A

2014-01-01

The new family of unconventional iron-based superconductors discovered in 2006 immediately relieved their copper-based high-temperature predecessors as the most actively studied superconducting compounds in the world. The experimental and theoretical effort made in order to unravel the mechanism of superconductivity in these materials has been overwhelming. Although our understanding of their microscopic properties has been improving steadily, the pairing mechanism giving rise to superconducting transition temperatures up to 55 K remains elusive. And yet the hope is strong that these materials, which possess a drastically different electronic structure but similarly high transition temperatures compared to the copper-based compounds, will shed essential new light onto the several-decade-old problem of unconventional superconductivity. In this work we review the current understanding of the itinerant-charge-carrier dynamics in the iron-based superconductors and parent compounds largely based on the optical-conductivity data the community has gleaned over the past seven years using such experimental techniques as reflectivity, ellipsometry, and terahertz transmission measurements and analyze the implications of these studies for the microscopic properties of the iron-based materials as well as the mechanism of superconductivity therein. (topical review)

Isometric multimodal photoacoustic microscopy based on optically transparent micro-ring ultrasonic detection.

Science.gov (United States)

Dong, Biqin; Li, Hao; Zhang, Zhen; Zhang, Kevin; Chen, Siyu; Sun, Cheng; Zhang, Hao F

2015-01-01

Photoacoustic microscopy (PAM) is an attractive imaging tool complementary to established optical microscopic modalities by providing additional molecular specificities through imaging optical absorption contrast. While the development of optical resolution photoacoustic microscopy (ORPAM) offers high lateral resolution, the acoustically-determined axial resolution is limited due to the constraint in ultrasonic detection bandwidth. ORPAM with isometric spatial resolution along both axial and lateral direction is yet to be developed. Although recently developed sophisticated optical illumination and reconstruction methods offer improved axial resolution in ORPAM, the image acquisition procedures are rather complicated, limiting their capabilities for high-speed imaging and being easily integrated with established optical microscopic modalities. Here we report an isometric ORPAM based on an optically transparent micro-ring resonator ultrasonic detector and a commercial inverted microscope platform. Owing to the superior spatial resolution and the ease of integrating our ORPAM with established microscopic modalities, single cell imaging with extrinsic fluorescence staining, intrinsic autofluorescence, and optical absorption can be achieved simultaneously. This technique holds promise to greatly improve the accessibility of PAM to the broader biomedical researchers.

Virtual-optical information security system based on public key infrastructure

Science.gov (United States)

Peng, Xiang; Zhang, Peng; Cai, Lilong; Niu, Hanben

2005-01-01

A virtual-optical based encryption model with the aid of public key infrastructure (PKI) is presented in this paper. The proposed model employs a hybrid architecture in which our previously published encryption method based on virtual-optics scheme (VOS) can be used to encipher and decipher data while an asymmetric algorithm, for example RSA, is applied for enciphering and deciphering the session key(s). The whole information security model is run under the framework of international standard ITU-T X.509 PKI, which is on basis of public-key cryptography and digital signatures. This PKI-based VOS security approach has additional features like confidentiality, authentication, and integrity for the purpose of data encryption under the environment of network. Numerical experiments prove the effectiveness of the method. The security of proposed model is briefly analyzed by examining some possible attacks from the viewpoint of a cryptanalysis.

Using optical remote sensing model to estimate oil slick thickness based on satellite image

International Nuclear Information System (INIS)

Lu, Y C; Tian, Q J; Lyu, C G; Fu, W X; Han, W C

2014-01-01

An optical remote sensing model has been established based on two-beam interference theory to estimate marine oil slick thickness. Extinction coefficient and normalized reflectance of oil are two important parts in this model. Extinction coefficient is an important inherent optical property and will not vary with the background reflectance changed. Normalized reflectance can be used to eliminate the background differences between in situ measured spectra and remotely sensing image. Therefore, marine oil slick thickness and area can be estimated and mapped based on optical remotely sensing image and extinction coefficient

Radio-over-fiber using an optical antenna based on Rydberg states of atoms

Science.gov (United States)

Deb, A. B.; Kjærgaard, N.

2018-05-01

We provide an experimental demonstration of a direct fiber-optic link for RF transmission ("radio-over-fiber") using a sensitive optical antenna based on a rubidium vapor cell. The scheme relies on measuring the transmission of laser light at an electromagnetically induced transparency resonance that involves highly excited Rydberg states. By dressing pairs of Rydberg states using microwave fields that act as local oscillators, we encoded RF signals in the optical frequency domain. The light carrying the information is linked via a virtually lossless optical fiber to a photodetector where the signal is retrieved. We demonstrate a signal bandwidth in excess of 1 MHz limited by the available coupling laser power and atomic optical density. Our sensitive, non-metallic and readily scalable optical antenna for microwaves allows extremely low-levels of optical power (˜1 μW) throughput in the fiber-optic link. It offers a promising future platform for emerging wireless network infrastructures.

Great circle solution to polarization-based quantum communication (QC) in optical fiber

Science.gov (United States)

Nordholt, Jane Elizabeth; Peterson, Charles Glen; Newell, Raymond Thorson; Hughes, Richard John

2016-03-15

Birefringence in optical fibers is compensated by applying polarization modulation at a receiver. Polarization modulation is applied so that a transmitted optical signal has states of polarization (SOPs) that are equally spaced on the Poincare sphere. Fiber birefringence encountered in propagation between a transmitter and a receiver rotates the great circle on the Poincare sphere that represents the polarization bases used for modulation. By adjusting received polarizations, polarization components of the received optical signal can be directed to corresponding detectors for decoding, regardless of the magnitude and orientation of the fiber birefringence. A transmitter can be configured to transmit in conjugate polarization bases whose SOPs can be represented as equidistant points on a great circle so that the received SOPs are mapped to equidistant points on a great circle and routed to corresponding detectors.

Influência do hipoclorito de sódio como fungicida na absorção de cálcio e silício pela soja

OpenAIRE

Resende, Anselmo; Souza, Jurandir Rodrigues de; Souza, Plínio Itamar de Mello de; Blum, Luiz Eduardo Bassay

2009-01-01

O objetivo da pesquisa foi verificar a ação do hipoclorito de sódio (NaOCl) no combate ao oídio na soja, quando aplicado só ou associado ao uso de fungicida, e a possível influência na absorção de cálcio e silício pela soja. Foram realizadas oito aplicações de NaOCl em parcelas que receberam apenas o sanitizante, com concentrações de 0,2%, 0,4% e 0,6%, parcelas que receberam essas mesmas concentrações e duas aplicações de fungicida e uma parcela controle. Não foram observadas diferenças es...

High performance electro-optical modulator based on photonic crystal and graphene

Science.gov (United States)

Malekmohammad, M.; Asadi, R.

2017-07-01

An electro-optical modulator is demonstrated based on Fano-resonance effect in an out-of-plane illumination of one-dimensional slab photonic crystal composed of two graphene layers. It has been shown that high sensitivity of the Fano-resonance and electro-refractive tuning of graphene layers provides a suitable condition to obtain an electro-optical modulator with low energy consumption (8 pJ) with contrast of 0.4.

Sol gel based fiber optic sensor for blook pH measurement

International Nuclear Information System (INIS)

Grant, S. A.; Glass, R. S.

1996-01-01

This paper describes a fiber-optic pH sensor based upon sol-gel encapsulation of a self-referencing dye, seminaphthorhodamine-1 carboxylate (SNARF-1C). The simple sol-gel fabrication procedure and low coating leachability are ideal for encapsulation and immobilization of dye molecules onto the end of an optical fiber. A miniature bench-top fluorimeter system was developed for use with the optical fiber to obtain pH measurements. Linear and reproducible responses were obtained in human blood in the pH range 6.8 to 8.0, which encompasses the clinically-relevant range. Therefore, this sensor can be considered for in vivo use

Design Optimization of Mixed-Criticality Real-Time Embedded Systems

DEFF Research Database (Denmark)

Tamas-Selicean, Domitian; Pop, Paul

2015-01-01

is allocated several time slots on a processor. Tasks of different SILs can share a partition only if they are all elevated to the highest SIL among them. Such elevation leads to increased development costs, which increase dramatically with each SIL. Tasks of higher SILs can be decomposed into redundant...... structures of lower SIL tasks. We are interested to determine (i) the mapping of tasks to processors, (ii) the assignment of tasks to partitions, (iii) the decomposition of tasks into redundant lower SIL tasks, (iv) the sequence and size of the partition time slots on each processor, and (v) the schedule...... tables, such that all the applications are schedulable and the development costs are minimized. We have proposed a Tabu Search-based approach to solve this optimization problem. The proposed algorithm has been evaluated using several synthetic and real-life benchmarks....

Fiber-optic based instrumentation for water and air monitoring

International Nuclear Information System (INIS)

MacCraith, B.D.

1991-01-01

In this paper real-time in-situ water and air monitoring capabilities based on fiber-optic sensing technology are described. This relatively new technology combines advances in fiber optic and optoelectronics with chemical spectorscopic techniques to enable field environmental monitoring of sub ppm quantities of specific pollutants. The advantages of this technology over conventional sampling methods are outlined. As it is the more developed area the emphasis is on water quality monitoring rather than air. Examples of commercially available, soon-to be available and laboratory systems are presented. One such example is a system used to detect hydrocarbon spills and leaking of underground hydrocarbon storage tanks

Optical logic gates based on electro-optic modulation with Sagnac interferometer.

Science.gov (United States)

Li, Qiliang; Zhu, Mengyun; Li, Dongqiang; Zhang, Zhen; Wei, Yizhen; Hu, Miao; Zhou, Xuefang; Tang, Xianghong

2014-07-20

In this work, we present a new structure to realize optical logic operation in a Sagnac interferometer with electro-optical modulation. In the scheme, we divide two counterpropagation signals in a Sagnac loop to two different arms with the electro-optical crystal by using two circulators. Lithium niobate materials whose electro-optical coefficient can be as large as 32.2×10(-12)  m/V make up the arms of the waveguides. Using the transfer matrix of the fiber coupler, we analyze the propagation of signals in this system and obtain the transmission characteristic curves and the extinction ratio. The results indicate that this optical switching has a high extinction ratio of about 60 dB and an ultrafast response time of 2.036 ns. In addition, the results reveal that the change of the dephasing between the two input signals and the modification of the modulation voltage added to the electro-optical crystal leads to the change of the extinction ratio. We also conclude that, in cases of the dephasing of two initial input signals Δφ=0, we can obtain the various logical operations, such as the logical operations D=A¯·B, D=A·B¯, C=A+B, and D=A⊕B in ports C and D of the system by adjusting the modulation voltage. When Δφ≠0, we obtain the arithmetic operations D=A+B, C=A⊕B, D=A·B¯, and C=A¯·B in ports C and D. This study is significant for the design of all optical networks by adjusting the modulation voltage.

An Evaluation of PC-Based Optical Character Recognition Systems.

Science.gov (United States)

Schreier, E. M.; Uslan, M. M.

1991-01-01

The review examines six personal computer-based optical character recognition (OCR) systems designed for use by blind and visually impaired people. Considered are OCR components and terms, documentation, scanning and reading, command structure, conversion, unique features, accuracy of recognition, scanning time, speed, and cost. (DB)

SciLab Based Remote Control of Thermo-Optical Plant

Directory of Open Access Journals (Sweden)

Miroslav Jano

2011-11-01

Full Text Available The paper deals with the web-based implementation of the control system of a thermo-optical plant. The control of the plant is based on the SciLab software which originally is not designed for web-based applications. The paper shows a possible way to circumvent this limitation. The ultimate goal is to enable remote controlled experiment using SciLab. The paper also describes possible tools for communication and control of the real plant and visualization of results.

A High-Performance Optical Memory Array Based on Inhomogeneity of Organic Semiconductors.

Science.gov (United States)

Pei, Ke; Ren, Xiaochen; Zhou, Zhiwen; Zhang, Zhichao; Ji, Xudong; Chan, Paddy Kwok Leung

2018-03-01

Organic optical memory devices keep attracting intensive interests for diverse optoelectronic applications including optical sensors and memories. Here, flexible nonvolatile optical memory devices are developed based on the bis[1]benzothieno[2,3-d;2',3'-d']naphtho[2,3-b;6,7-b']dithiophene (BBTNDT) organic field-effect transistors with charge trapping centers induced by the inhomogeneity (nanosprouts) of the organic thin film. The devices exhibit average mobility as high as 7.7 cm 2 V -1 s -1 , photoresponsivity of 433 A W -1 , and long retention time for more than 6 h with a current ratio larger than 10 6 . Compared with the standard floating gate memory transistors, the BBTNDT devices can reduce the fabrication complexity, cost, and time. Based on the reasonable performance of the single device on a rigid substrate, the optical memory transistor is further scaled up to a 16 × 16 active matrix array on a flexible substrate with operating voltage less than 3 V, and it is used to map out 2D optical images. The findings reveal the potentials of utilizing [1]benzothieno[3,2-b][1]benzothiophene (BTBT) derivatives as organic semiconductors for high-performance optical memory transistors with a facile structure. A detailed study on the charge trapping mechanism in the derivatives of BTBT materials is also provided, which is closely related to the nanosprouts formed inside the organic active layer. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Metal-Organic Framework Thin Film Coated Optical Fiber Sensors: A Novel Waveguide-Based Chemical Sensing Platform.

Science.gov (United States)

Kim, Ki-Joong; Lu, Ping; Culp, Jeffrey T; Ohodnicki, Paul R

2018-02-23

Integration of optical fiber with sensitive thin films offers great potential for the realization of novel chemical sensing platforms. In this study, we present a simple design strategy and high performance of nanoporous metal-organic framework (MOF) based optical gas sensors, which enables detection of a wide range of concentrations of small molecules based upon extremely small differences in refractive indices as a function of analyte adsorption within the MOF framework. Thin and compact MOF films can be uniformly formed and tightly bound on the surface of etched optical fiber through a simple solution method which is critical for manufacturability of MOF-based sensor devices. The resulting sensors show high sensitivity/selectivity to CO 2 gas relative to other small gases (H 2 , N 2 , O 2 , and CO) with rapid (optical fiber platform which results in an amplification of inherent optical absorption present within the MOF-based sensing layer with increasing values of effective refractive index associated with adsorption of gases.

Active polarization imaging system based on optical heterodyne balanced receiver

Science.gov (United States)

Xu, Qian; Sun, Jianfeng; Lu, Zhiyong; Zhou, Yu; Luan, Zhu; Hou, Peipei; Liu, liren

2017-08-01

Active polarization imaging technology has recently become the hot research field all over the world, which has great potential application value in the military and civil area. By introducing active light source, the Mueller matrix of the target can be calculated according to the incident light and the emitted or reflected light. Compared with conventional direct detection technology, optical heterodyne detection technology have higher receiving sensitivities, which can obtain the whole amplitude, frequency and phase information of the signal light. In this paper, an active polarization imaging system will be designed. Based on optical heterodyne balanced receiver, the system can acquire the horizontal and vertical polarization of reflected optical field simultaneously, which contain the polarization characteristic of the target. Besides, signal to noise ratio and imaging distance can be greatly improved.

Dual-modal cancer detection based on optical pH sensing and Raman spectroscopy

Science.gov (United States)

Kim, Soogeun; Lee, Seung Ho; Min, Sun Young; Byun, Kyung Min; Lee, Soo Yeol

2017-10-01

A dual-modal approach using Raman spectroscopy and optical pH sensing was investigated to discriminate between normal and cancerous tissues. Raman spectroscopy has demonstrated the potential for in vivo cancer detection. However, Raman spectroscopy has suffered from strong fluorescence background of biological samples and subtle spectral differences between normal and disease tissues. To overcome those issues, pH sensing is adopted to Raman spectroscopy as a dual-modal approach. Based on the fact that the pH level in cancerous tissues is lower than that in normal tissues due to insufficient vasculature formation, the dual-modal approach combining the chemical information of Raman spectrum and the metabolic information of pH level can improve the specificity of cancer diagnosis. From human breast tissue samples, Raman spectra and pH levels are measured using fiber-optic-based Raman and pH probes, respectively. The pH sensing is based on the dependence of pH level on optical transmission spectrum. Multivariate statistical analysis is performed to evaluate the classification capability of the dual-modal method. The analytical results show that the dual-modal method based on Raman spectroscopy and optical pH sensing can improve the performance of cancer classification.

Fog Density Estimation and Image Defogging Based on Surrogate Modeling for Optical Depth.

Science.gov (United States)

Jiang, Yutong; Sun, Changming; Zhao, Yu; Yang, Li

2017-05-03

In order to estimate fog density correctly and to remove fog from foggy images appropriately, a surrogate model for optical depth is presented in this paper. We comprehensively investigate various fog-relevant features and propose a novel feature based on the hue, saturation, and value color space which correlate well with the perception of fog density. We use a surrogate-based method to learn a refined polynomial regression model for optical depth with informative fog-relevant features such as dark-channel, saturation-value, and chroma which are selected on the basis of sensitivity analysis. Based on the obtained accurate surrogate model for optical depth, an effective method for fog density estimation and image defogging is proposed. The effectiveness of our proposed method is verified quantitatively and qualitatively by the experimental results on both synthetic and real-world foggy images.

Optical power-based interrogation of plasmonic tilted fiber Bragg grating biosensors

Science.gov (United States)

González-Vila, Á.; Lopez-Aldaba, A.; Kinet, D.; Mégret, P.; Lopez-Amo, M.; Caucheteur, C.

2017-04-01

Two interrogation techniques for plasmonic tilted fiber Bragg grating sensors are reported and experimentally tested. Typical interrogation methods are usually based on tracking the wavelength shift of the most sensitive cladding mode, but for biosensing applications, spectrometer-based methods can be replaced by more efficient solutions. The proposed techniques thus rely on the measurement of the induced changes in optical power. The first one consists of a properly polarized tunable laser source set to emit at the wavelength of the sensor most sensitive mode and an optical power meter to measure the transmitted response. For the second method, a uniform fiber Bragg grating is photo-inscribed beyond the sensor in such a way that its central wavelength matches the sensor most sensitive mode, acting as an optical filter. Using a LED source, light reflected backwards by this grating is partially attenuated when passing through the sensor due to plasmon wave excitation and the power changes are quantified once again with an optical power meter. A performance analysis of the techniques is carried out and they both result competitive interrogation solutions. The work thus focuses on the development of cost-effective alternatives for monitoring this kind of biosensors in practical situations.