Atlantic salmon skin and fillet color changes effected by perimortem handling stress, rigor mortis, and ice storage.

Science.gov (United States)

Erikson, U; Misimi, E

2008-03-01

The changes in skin and fillet color of anesthetized and exhausted Atlantic salmon were determined immediately after killing, during rigor mortis, and after ice storage for 7 d. Skin color (CIE L*, a*, b*, and related values) was determined by a Minolta Chroma Meter. Roche SalmoFan Lineal and Roche Color Card values were determined by a computer vision method and a sensory panel. Before color assessment, the stress levels of the 2 fish groups were characterized in terms of white muscle parameters (pH, rigor mortis, and core temperature). The results showed that perimortem handling stress initially significantly affected several color parameters of skin and fillets. Significant transient fillet color changes also occurred in the prerigor phase and during the development of rigor mortis. Our results suggested that fillet color was affected by postmortem glycolysis (pH drop, particularly in anesthetized fillets), then by onset and development of rigor mortis. The color change patterns during storage were different for the 2 groups of fish. The computer vision method was considered suitable for automated (online) quality control and grading of salmonid fillets according to color.

Color change of CAD-CAM materials and composite resin cements after thermocycling.

Science.gov (United States)

Gürdal, Isil; Atay, Ayse; Eichberger, Marlis; Cal, Ebru; Üsümez, Aslihan; Stawarczyk, Bogna

2018-04-24

The color of resin cements and computer-aided-design and computer-aided-manufacturing (CAD-CAM) restorations may change with aging. The purpose of this in vitro study was to analyze the influence of thermocycling on the color of CAD-CAM materials with underlying resin cement. Seven different CAD-CAM materials, composite resins and glass-ceramics were cut into 0.7-mm and 1.2-mm thicknesses (n=10) and cemented with a dual-polymerizing resin cement, a light-polymerizing resin cement, and a preheated composite resin (N=420). Color values were measured by using spectrophotometry. Specimens were subjected to thermocycling (5°C and 55°C; 5000 cycles). The measured color difference (ΔE) data were analyzed by using descriptive statistics. Normality of data distribution was tested by using the Kolmogorov-Smirnov test. Three-way and 1-way ANOVA followed by the Scheffé post-hoc test and unpaired 2-sample Student t test were computed to determine the significant differences among the tested parameters (α=.05). ΔE values were significantly influenced by the CAD-CAM material (η p 2 =0.85, Pcement (η P 2 =0.03, P=.003) but were not influenced by thickness (P=.179). Significant interactions were present among thickness, cement, and CAD-CAM materials (Pcement showed significantly lower ΔE values than the preheated composite resin (P=.003). Restoration materials and composite resin cement types used for cementation influence the amount of color change due to aging. Copyright © 2018 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Color Changing Hydrogen Sensors

Science.gov (United States)

Roberson, Luke B.; Williams, Martha; Captain, Janine E.; Mohajeri, Nahid; Raissi, Ali

2015-01-01

During the Space Shuttle Program, one of the most hazardous operation that occurred was the loading of liquid hydrogen (LH2) during fueling operations of the spacecraft. Due to hydrogen's low explosive limit, any amount leaked could lead to catastrophic event. Hydrogen's chemical properties make it ideal as a rocket fuel; however, the fuel is deemed unsafe for most commercial use because of the inability to easily detect the gas leaking. The increased use of hydrogen over traditional fossil fuels would reduce greenhouse gases and America's dependency on foreign oil. Therefore a technology that would improve safety at NASA and in the commercial sector while creating a new economic sector would have a huge impact to NASA's mission. The Chemochromic Detector for sensing hydrogen gas leakage is a color-changing detector that is useful in any application where it is important to know not only the presence but also the location of the hydrogen gas leak. This technology utilizes a chemochromicpigment and polymer matrix that can be molded or spun into rigid or pliable shapes useable in variable temperature environments including atmospheres of inert gas, hydrogen gas, or mixtures of gases. A change in color of the detector material indicates where gaseous hydrogen leaks are occurring. The irreversible sensor has a dramatic color change from beige to dark grey and remains dark grey after exposure. A reversible pigment changes from white to blue in the presence of hydrogen and reverts back to white in the presence of oxygen. Both versions of the sensor's pigments were comprised of a mixture of a metal oxide substrate and a hydro-chromic compound (i.e., the compound that changed color in the presence of hydrogen) and immediately notified the operator of the presence of low levels of hydrogen. The detector can be used in a variety of formats including paint, tape, caulking, injection molded parts, textiles and fabrics, composites, and films. This technology brings numerous

Statistical and molecular analyses of evolutionary significance of red-green color vision and color blindness in vertebrates.

Science.gov (United States)

Yokoyama, Shozo; Takenaka, Naomi

2005-04-01

Red-green color vision is strongly suspected to enhance the survival of its possessors. Despite being red-green color blind, however, many species have successfully competed in nature, which brings into question the evolutionary advantage of achieving red-green color vision. Here, we propose a new method of identifying positive selection at individual amino acid sites with the premise that if positive Darwinian selection has driven the evolution of the protein under consideration, then it should be found mostly at the branches in the phylogenetic tree where its function had changed. The statistical and molecular methods have been applied to 29 visual pigments with the wavelengths of maximal absorption at approximately 510-540 nm (green- or middle wavelength-sensitive [MWS] pigments) and at approximately 560 nm (red- or long wavelength-sensitive [LWS] pigments), which are sampled from a diverse range of vertebrate species. The results show that the MWS pigments are positively selected through amino acid replacements S180A, Y277F, and T285A and that the LWS pigments have been subjected to strong evolutionary conservation. The fact that these positively selected M/LWS pigments are found not only in animals with red-green color vision but also in those with red-green color blindness strongly suggests that both red-green color vision and color blindness have undergone adaptive evolution independently in different species.

Determination of Polymers Thermal Degradation by Color Change Analysis

Directory of Open Access Journals (Sweden)

Andrés Felipe Rojas González

2016-01-01

Full Text Available Context: It has been observed that thermal degradation of thermoplastic polymers, when they are reprocessed by injection, extrusion and extrusion / injection, undergo color changes in the product, although it not has been established as this change occurs. Method: It analyzed the effect on thermal degradation caused by polymer type, processing type, polymer grade, rotation speed of the extrusion screw and number of reprocessing, which is quantified by the color change using an empirical equation, with experimental data obtained by analysis through a microcolor colorimeter. Results: It was found that the color change analysis provides information about progress of the thermal degradation and stability of thermoplastic polymers, which are undergoing to multiple reprocessing events and processes. Conclusions: It was established that this technique can be implemented as a simple and efficient measure of thermoplastic products quality control, according to their color change.

Color appearance of familiar objects: effects of object shape, texture, and illumination changes.

Science.gov (United States)

Olkkonen, Maria; Hansen, Thorsten; Gegenfurtner, Karl R

2008-05-26

People perceive roughly constant surface colors despite large changes in illumination. The familiarity of colors of some natural objects might help achieve this feat through direct modulation of the objects' color appearance. Research on memory colors and color appearance has yielded controversial results and due to the employed methods has often confounded perceptual with semantic effects. We studied the effect of memory colors on color appearance by presenting photographs of fruit on a monitor under various simulated illuminations and by asking observers to make either achromatic or typical color settings without placing demands on short-term memory or semantic processing. In a control condition, we presented photographs of 3D fruit shapes without texture and 2D outline shapes. We found that (1) achromatic settings for fruit were systematically biased away from the gray point toward the opposite direction of a fruit's memory color; (2) the strength of the effect depended on the degree of naturalness of the stimuli; and (3) the effect was evident under all tested illuminations, being strongest for illuminations whose chromaticity was closest to the stimulus chromaticity. We conclude that the visual identity of an object has a measurable effect on color perception, and that this effect is robust under illuminant changes, indicating its potential significance as an additional mechanism for color constancy.

Perceived changes in ordinary autobiographical events' affect and visual imagery colorfulness.

Science.gov (United States)

Ritchie, Timothy D; Batteson, Tamzin J

2013-06-01

We examined the extent to which the perceived changes in visual imagery colorfulness impact on the affect intensity associated with ordinary autobiographical events across time. We garnered support for the hypothesis that recent events become memorial phenomena via an emotion regulation process such that positive events retained their affective pleasantness longer than negative events retained affective unpleasantness because, in part, across 2 weeks the former retained their imagery colorfulness longer than the latter events did. A similar but distinct model was unsupported. We discuss the significance of imagery colorfulness and affect intensity in the context of memory for everyday autobiographical events. Copyright © 2013 Elsevier Inc. All rights reserved.

You are what you eat: within-subject increases in fruit and vegetable consumption confer beneficial skin-color changes.

Directory of Open Access Journals (Sweden)

Ross D Whitehead

Full Text Available Fruit and vegetable consumption and ingestion of carotenoids have been found to be associated with human skin-color (yellowness in a recent cross-sectional study. This carotenoid-based coloration contributes beneficially to the appearance of health in humans and is held to be a sexually selected cue of condition in other species.Here we investigate the effects of fruit and vegetable consumption on skin-color longitudinally to determine the magnitude and duration of diet change required to change skin-color perceptibly. Diet and skin-color were recorded at baseline and after three and six weeks, in a group of 35 individuals who were without makeup, self-tanning agents and/or recent intensive UV exposure. Six-week changes in fruit and vegetable consumption were significantly correlated with changes in skin redness and yellowness over this period, and diet-linked skin reflectance changes were significantly associated with the spectral absorption of carotenoids and not melanin. We also used psychophysical methods to investigate the minimum color change required to confer perceptibly healthier and more attractive skin-coloration. Modest dietary changes are required to enhance apparent health (2.91 portions per day and attractiveness (3.30 portions.Increased fruit and vegetable consumption confers measurable and perceptibly beneficial effects on Caucasian skin appearance within six weeks. This effect could potentially be used as a motivational tool in dietary intervention.

Color of bulk-fill composite resin restorative materials.

Science.gov (United States)

Barutcigil, Çağatay; Barutcigil, Kubilay; Özarslan, Mehmet Mustafa; Dündar, Ayşe; Yilmaz, Burak

2018-03-01

To evaluate the color stability of novel bulk-fill composite resins. Color measurements of a nanohybrid composite resin (Z550) and 3 bulk-fill composite resins (BLK, AFX, XTF; n = 45) were performed before polymerization. After polymerization, color measurements were repeated and specimens were immersed in distilled water or red wine, or coffee. Color change [CIEDE2000 (ΔE 00 )] was calculated after 24 h, 1 and 3 weeks. Data were analyzed with Kruskal-Wallis, Mann-Whitney U and Wilcoxon tests (α = 0.05). Color changes observed after polymerization were significant for all groups. Color changes observed in distilled water for Z550 and AFX were significant. Color changes after stored in red wine and coffee were significant for all groups. Bulk-fill composite resin color change increased over time for all groups in red wine and coffee (P composite resin and bulk-fill composite resins. AFX had the highest color change in distilled water. The color of tested bulk-fill composite resins significantly changed after immersion in beverages and over time. Color change observed with the nanohybrid composite resin after 1 week was stable. Clinicians should keep in mind that tested composite resins may change color when exposed to water and significantly change color immediately after they are polymerized. In addition, the color change continues over time should the patient is a coffee and/or red wine consumer. © 2017 Wiley Periodicals, Inc.

Why Leaves Change Color

Science.gov (United States)

USDA Forest Service

For years, scientists have worked to understand the changes that happen to trees and shrubs in the autumn. Although we don't know all the details, we do know enough to explain the basics and help you to enjoy more fully Nature's multicolored autumn farewell. Three factors influence autumn leaf color-leaf pigments, length of night, and weather, but not quite...

The role of unique color changes and singletons in attention capture.

Science.gov (United States)

von Mühlenen, Adrian; Conci, Markus

2016-10-01

Previous studies have shown that a sudden color change is typically less salient in capturing attention than the onset of a new object. Von Mühlenen, Rempel, and Enns (Psychological Science 16: 979-986, 2005) showed that a color change can capture attention as effectively as the onset of a new object given that it occurs during a period of temporal calm, where no other display changes happen. The current study presents a series of experiments that further investigate the conditions under which a change in color captures attention, by disentangling the change signal from the onset of a singleton. The results show that the item changing color receives attentional priority irrespective of whether this change goes along with the appearance of a singleton or not.

At-line cotton color measurements by portable color spectrophotometers

Science.gov (United States)

As a result of reports of cotton bales that had significant color changes from their initial Uster® High Volume Instrument (HVI™) color measurements, a program was implemented to measure cotton fiber color (Rd, +b) at-line in remote locations (warehouse, mill, etc.). The measurement of cotton fiber...

Role of color memory in successive color constancy.

Science.gov (United States)

Ling, Yazhu; Hurlbert, Anya

2008-06-01

We investigate color constancy for real 2D paper samples using a successive matching paradigm in which the observer memorizes a reference surface color under neutral illumination and after a temporal interval selects a matching test surface under the same or different illumination. We find significant effects of the illumination, reference surface, and their interaction on the matching error. We characterize the matching error in the absence of illumination change as the "pure color memory shift" and introduce a new index for successive color constancy that compares this shift against the matching error under changing illumination. The index also incorporates the vector direction of the matching errors in chromaticity space, unlike the traditional constancy index. With this index, we find that color constancy is nearly perfect.

Color changes kinetics during deep fat frying of carrot slice

Science.gov (United States)

Salehi, Fakhreddin

2018-05-01

Heat and mass transfer phenomena take place during frying cause physicochemical changes, which affect the colour and surface of the fried products. The effect of frying temperature on the colour changes and heat transfer during deep fat frying of carrot has been investigated. The colour scale parameters redness (a*), yellowness (b*) and lightness (L*), and color change intensity (ΔE) were used to estimate colour changes during frying as a function of oil temperature. L* value of fried carrot decreased during frying. The redness of fried carrot decreased during the early stages of frying, while it increased afterwards (become more red). A first-order kinetic equation was used for each one of the three colour parameters, in which the rate constant is a function of oil temperatures. The results showed that oil temperature has a significant effect on the colour parameters. Different kinetic models were used to fit the experimental data and the results revealed that the quadratic model was the most suitable to describe the color change intensity (ΔE) (R > 0.96). Center temperature of carrot slice increased with increase in oil temperature and time during frying.

Melanin deposition ruled out as cause of color changes in the red-eared sliders (Trachemys scripta elegans).

Science.gov (United States)

Cao, Dainan; Gong, Shiping; Yang, Jiangbo; Li, Weiye; Ge, Yan; Wei, Yufeng

2018-03-01

Animal coloration primarily depends on the presence of pigments and the mixing ratio of eumelanin and pheomelanin. The color of red-eared slider's carapace varies with age, from an olive green to a yellow green, and then to a yellow brown in juveniles, generally. The purpose of the present study was to investigate whether this color change is related to the difference in melanin expression. Melanin deposition levels were examined in the carapace, skin, eye and muscle of the three color-types using hematoxylin and eosin staining. Moreover, the full-length coding sequence (CDS) of red-eared slider turtle melanin biosynthesis regulatory genes TYR, TYRP1, MITF and SLC24A5 were cloned, sequenced and quantitatively analyzed. Both histological view of melanin deposition and quantitative real-time PCR test of melanin-regulated gene expressions showed that there are significant differences among different tissues of red-eared slider, but no significant difference among different color-types, indicating that melanin deposition is not associated with ontogenetic color change in the carapace of red-eared slider. This study initially explore the melanin deposition and the mRNA expression of melanin biosynthesis regulatory genes in red-eared slider, which serve as a foundation for further insight into the pigmentation patterns and the mechanism of body color change in turtles. Copyright © 2017 Elsevier Inc. All rights reserved.

Characterization of Angle Dependent Color Travel of Printed Multi-Color Effect Pigment on Different Color Substrates

Directory of Open Access Journals (Sweden)

Mirica Karlovits

2015-03-01

Full Text Available Color-travel pigments, which exhibit much more extensive color change as well provide angle-dependent optical effect can be used in many industrial products. In present paper the multi-color effect pigment printed on three different foils with different background color (black, silver and transparent was investigated. The pigment was based on synthetically produced transparent silicon dioxide platelets coated with titanium dioxide. CIEL*a*b* values and reflection of prints were measured by multi-angle spectrophotometer at constant illumination at an angle of 45º and different viewing angles (-15º, 15°, 25º, 45º, 75º and 110º were used. The measurements of printed multi-color pigment showed that CIEL*a*b* color coordinates varied to great extents, depending on detection angles as well on color of the printing substrate. The study revealed that pigmnet printed on black background obtained significant change in color. The study has also shown that when viewing angle increases, the reflection curves decreases.

Rotary motion impairs attention to color change in 4-month-old infants.

Science.gov (United States)

Kavšek, Michael

2013-06-01

Continuous color changes of an array of elements appear to stop changing if the array undergoes a coherent motion. This silencing illusion was demonstrated for adults by Suchow and Alvarez (Current Biology, 2011, vol. 21, pp. 140-143). The current forced-choice preferential looking study examined 4-month-old infants' sensitivity to the silencing illusion. Two experimental conditions were conducted. In the dynamic condition, infants were tested with two rotating rings of circular different-colored dots. In one of these rings the dots continuously changed color, whereas in the other ring the dots did not change color. In the static condition, the global rotary motion was eliminated from the targets. Infants preferred looking at the color-changing target in the static condition but not in the dynamic condition; they attended to the color changes in the static condition but failed to detect them in the dynamic condition. This differential looking pattern is consistent with the hypothesis that the silencing illusion can be established during early infancy. A control group of adults also responded to the silencing phenomenon. This substantiates that the stimuli generate a robust illusory effect. Copyright © 2013 Elsevier Inc. All rights reserved.

Dimensional Stability of Color-Changing Irreversible Hydrocolloids after Disinfection

Directory of Open Access Journals (Sweden)

Khaledi AAR

2015-03-01

Full Text Available Statement of Problem: Disinfection of dental impressions is a weak point in the dental hygiene chain. In addition, dental office personnel and dental technicians are endangered by cross-contamination. Objectives: This study aimed to investigate the dimensional stability of two color-changing irreversible hydrocolloid materials (IH after disinfection with glutaraldehyde. Materials and Methods: In this in vitro study, impressions were made of a master maxillary arch containing three reference inserts on the occlucal surface of the left and right maxillary second molars and in the incisal surface of the maxillary central incisors. Two types of color-changing irreversible hydrocolloid (tetrachrom, cavex were used. Glutaraldehyde 2% was used in two methods of spraying and immersion to disinfect the impressions. The control group was not disinfected. Casts were made of type IV gypsum. The linear dimensional change of the stone casts was measured with a profile projector. For statistical analysis, Kruskall-Wallis and Mann-Witney tests were used (α=0.05. Results: By immersion method, the casts fabricated from tetrachrom were 0.36% larger in the anteroposterior (AP and 0.05% smaller in cross arch (CA dimensions; however, the casts prepared after spraying of tetrachrom were 0.44% larger in the AP and 0.10% smaller in CA dimensions. The casts made from Cavex were 0.05% smaller in the AP and 0.02% smaller in CA dimensions after spraying and 0.01% smaller in the AP and 0.003% smaller in CA dimensions after immersion. Generally there were not significant differences in AP and CA dimensions of the experimental groups compared to the control (p > 0.05. Conclusions: Disinfection of the tested color-changing irreversible hydrocolloids by glutaraldahyde 2% did not compromise the accuracy of the obtained casts.

Oral mucosal color changes as a clinical biomarker for cancer detection.

Science.gov (United States)

Latini, Giuseppe; De Felice, Claudio; Barducci, Alessandro; Chitano, Giovanna; Pignatelli, Antonietta; Grimaldi, Luca; Tramacere, Francesco; Laurini, Ricardo; Andreassi, Maria Grazia; Portaluri, Maurizio

2012-07-01

Screening is a key tool for early cancer detection/prevention and potentially saves lives. Oral mucosal vascular aberrations and color changes have been reported in hereditary nonpolyposis colorectal cancer patients, possibly reflecting a subclinical extracellular matrix abnormality implicated in the general process of cancer development. Reasoning that physicochemical changes of a tissue should affect its optical properties, we investigated the diagnostic ability of oral mucosal color to identify patients with several types of cancer. A total of 67 patients with several histologically proven malignancies at different stages were enrolled along with a group of 60 healthy controls of comparable age and sex ratio. Oral mucosal color was measured in selected areas, and then univariate, cluster, and principal component analyses were carried out. Lower red and green and higher blue values were significantly associated with evidence of cancer (all Pgreen coordinates. Likewise, the second principal component coordinate of the red-green clusters discriminated patients from controls with 98.2% sensitivity and 95% specificity (cut-off criterion≤0.4547; P=0.0001). The scatterplots of the chrominances revealed the formation of two well separated clusters, separating cancer patients from controls with a 99.4% probability of correct classification. These findings highlight the ability of oral color to encode clinically relevant biophysical information. In the near future, this low-cost and noninvasive method may become a useful tool for early cancer detection.

Physiologically induced color-pattern changes in butterfly wings: mechanistic and evolutionary implications.

Science.gov (United States)

Otaki, Joji M

2008-07-01

A mechanistic understanding of the butterfly wing color-pattern determination can be facilitated by experimental pattern changes. Here I review physiologically induced color-pattern changes in nymphalid butterflies and their mechanistic and evolutionary implications. A type of color-pattern change can be elicited by elemental changes in size and position throughout the wing, as suggested by the nymphalid groundplan. These changes of pattern elements are bi-directional and bi-sided dislocation toward or away from eyespot foci and in both proximal and distal sides of the foci. The peripheral elements are dislocated even in the eyespot-less compartments. Anterior spots are more severely modified, suggesting the existence of an anterior-posterior gradient. In one species, eyespots are transformed into white spots with remnant-like orange scales, and such patterns emerge even at the eyespot-less "imaginary" foci. A series of these color-pattern modifications probably reveal "snap-shots" of a dynamic morphogenic signal due to heterochronic uncoupling between the signaling and reception steps. The conventional gradient model can be revised to account for these observed color-pattern changes.

Color change of composite resins subjected to accelerated artificial aging

Directory of Open Access Journals (Sweden)

Denise Cremonezzi Tornavoi

2013-01-01

Conclusions: All composite resins presented unacceptable color changes after 382 h of aging and different composite resins with same hue, presented different colors before being subjected to the aging process (B2 and C2 and after (B2. It was also observed color difference within a group of the same composite resin and same hue.

Visual fields and eye morphology support color vision in a color-changing crab-spider.

Science.gov (United States)

Insausti, Teresita C; Defrize, Jérémy; Lazzari, Claudio R; Casas, Jérôme

2012-03-01

Vision plays a major role in many spiders, being involved in prey hunting, orientation or substrate choice, among others. In Misumena vatia, which experiences morphological color changes, vision has been reported to be involved in substrate color matching. Electrophysiological evidence reveals that at least two types of photoreceptors are present in this species, but these data are not backed up by morphological evidence. This work analyzes the functional structure of the eyes of this spider and relates it to its color-changing abilities. A broad superposition of the visual field of the different eyes was observed, even between binocular regions of principal and secondary eyes. The frontal space is simultaneously analyzed by four eyes. This superposition supports the integration of the visual information provided by the different eye types. The mobile retina of the principal eyes of this spider is organized in three layers of three different types of rhabdoms. The third and deepest layer is composed by just one large rhabdom surrounded by dark screening pigments that limit the light entry. The three pairs of secondary eyes have all a single layer of rhabdoms. Our findings provide strong support for an involvement of the visual system in color matching in this spider. Copyright © 2011 Elsevier Ltd. All rights reserved.

Change Detection Analysis of Water Pollution in Coimbatore Region using Different Color Models

Science.gov (United States)

Jiji, G. Wiselin; Devi, R. Naveena

2017-12-01

The data acquired through remote sensing satellites furnish facts about the land and water at varying resolutions and has been widely used for several change detection studies. Apart from the existence of many change detection methodologies and techniques, emergence of new ones continues to subsist. Existing change detection techniques exploit images that are either in gray scale or RGB color model. In this paper we introduced color models for performing change detection for water pollution. Here the polluted lakes are classified and post-classification change detection techniques are applied to RGB images and results obtained are analysed for changes to exist or not. Furthermore RGB images obtained after classification when converted to any of the two color models YCbCr and YIQ is found to produce the same results as that of the RGB model images. Thus it can be concluded that other color models like YCbCr, YIQ can be used as substitution to RGB color model for analysing change detection with regard to water pollution.

Drying and radial shrinkage characteristics and changes in color ...

African Journals Online (AJOL)

Drying and radial shrinkage characteristics and changes in color and shape of carrots tissues during air drying were studied. Slices dimensions were obtained by computer vision and the color was quantified by chroma, hue, whitening index and total carotenoids contents. The drying time became shorter of 1 h when ...

Estimation of color modification in digital images by CFA pattern change.

Science.gov (United States)

Choi, Chang-Hee; Lee, Hae-Yeoun; Lee, Heung-Kyu

2013-03-10

Extensive studies have been carried out for detecting image forgery such as copy-move, re-sampling, blurring, and contrast enhancement. Although color modification is a common forgery technique, there is no reported forensic method for detecting this type of manipulation. In this paper, we propose a novel algorithm for estimating color modification in images acquired from digital cameras when the images are modified. Most commercial digital cameras are equipped with a color filter array (CFA) for acquiring the color information of each pixel. As a result, the images acquired from such digital cameras include a trace from the CFA pattern. This pattern is composed of the basic red green blue (RGB) colors, and it is changed when color modification is carried out on the image. We designed an advanced intermediate value counting method for measuring the change in the CFA pattern and estimating the extent of color modification. The proposed method is verified experimentally by using 10,366 test images. The results confirmed the ability of the proposed method to estimate color modification with high accuracy. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

75 FR 48736 - Culturally Significant Objects Imported for Exhibition Determinations: “Kurt Schwitters: Color...

Science.gov (United States)

2010-08-11

... DEPARTMENT OF STATE [Public Notice 7117] Culturally Significant Objects Imported for Exhibition Determinations: ``Kurt Schwitters: Color and Collage'' SUMMARY: Notice is hereby given of the following... objects to be included in the exhibition ``Kurt Schwitters: Color and Collage,'' imported from abroad for...

77 FR 12103 - Culturally Significant Objects Imported for Exhibition Determinations: “Colorful Realm: Japanese...

Science.gov (United States)

2012-02-28

... DEPARTMENT OF STATE [Public Notice: 7807] Culturally Significant Objects Imported for Exhibition Determinations: ``Colorful Realm: Japanese Bird-and-Flower Paintings by It[omacr] Jakuch[umacr] (1716-1800... determine that the objects to be included in the exhibition ``Colorful Realm: Japanese Bird-and-Flower...

Transcriptomics of morphological color change in polychromatic Midas cichlids.

Science.gov (United States)

Henning, Frederico; Jones, Julia C; Franchini, Paolo; Meyer, Axel

2013-03-13

Animal pigmentation has received much attention in evolutionary biology research due to its strong implications for adaptation and speciation. However, apart from a few cases the genetic changes associated with these evolutionary processes remain largely unknown. The Midas cichlid fish from Central America are an ideal model system for investigating pigmentation traits that may also play a role in speciation. Most Midas cichlids maintain their melanophores and exhibit a grayish (normal) color pattern throughout their lives. A minority of individuals, however, undergo color change and exhibit a distinctive gold or even white coloration in adulthood. The ontogenetic color change in the Midas cichlids may also shed light on the molecular mechanisms underlying pigmentation disorders in humans. Here we use next-generation sequencing (Illumina) RNAseq analyses to compare skin transcriptome-wide expression levels in three distinct stages of color transformation in Midas cichlids. cDNA libraries of scale tissue, for six biological replicates of each group, were generated and sequenced using Illumina technology. Using a combination of three differential expression (DE) analyses we identified 46 candidate genes that showed DE between the color morphs. We find evidence for two key DE patterns: a) genes involved in melanosomal pathways are up-regulated in normally pigmented fish; and b) immediate early and inflammatory response genes were up-regulated in transitional fish, a response that parallels some human skin disorders such as melanoma formation and psoriasis. One of the DE genes segregates with the gold phenotype in a genetic cross and might be associated with incipient speciation in this highly "species-rich" lineage of cichlids. Using transcriptomic analyses we successfully identified key expression differences between different color morphs of Midas cichlid fish. These differentially expressed genes have important implications for our understanding of the molecular

Color change in acrylic resin processed in three ways after immersion in water, cola, coffee, mate and wine.

Science.gov (United States)

Waldemarin, Renato Fa; Terra, Priscila C; Pinto, Luciana R; Faot, Fernanda; Camacho, Guilherme B

2013-01-01

Denture bases may undergo color change over time induced by pigment accumulation within their body; however there is a lack of information regarding the role of yerba mate tea in this process. This work evaluated the effect of five common beverages, including yerba mate tea, on color changes of acrylic denture base resins processed in three different ways. Three different processing techniques were used (P1--microwave irradiation/microwave activated resin; P2--heat polymerization/conventional heat activated resin and P3--microwave irradiation/conventional heat polymerized resin) to make twenty five resin discs each (3.0 mm thick x 20 mm diameter), totaling seventy-five resin discs. The discs made with each technique were randomly divided into five groups (n = 5) and placed in the following solutions: G1-water; G2-cola; G3-coffee; G4-yerba mate tea; G5-red wine, for 30 days at 37 degrees C. The solutions were renewed every 3 days. Color change on the CIE-L*a*b* scale was measured with a Konica-Minolta CR-10 colorimeter and compared with original L* a* and b* values of each specimen prior to immersion. Data were analyzed using 2-way ANOVA, and showed no difference among techniques and significant statistical differences among solutions (p < 0.05). Tukey's post-hoc test showed that the lowest color changes were for water and cola, which were undistinguishable from each other; coffee produced the second lowest color change; yerba mate tea produced second greatest color change, while the greatest color change was produced by red wine. Within the limitations of this study, it was concluded that almost all the solutions used can change color in acrylic resin, especially yerba mate tea, considered distinguishable by professionals, and red wine, considered distinguishable by patients and clinically unacceptable.

Color change of composite resins subjected to accelerated artificial aging.

Science.gov (United States)

Tornavoi, Denise Cremonezzi; Agnelli, José Augusto Marcondes; Panzeri, Heitor; Dos Reis, Andréa Cândido

2013-01-01

The aim of this study was to evaluate the influence of accelerated artificial aging (AAA) on the color change of composite resins used in dentistry. Three composite resins were evaluated: Two microhybrids and one hybrid of higher viscosity, with different amounts and sizes of filler particles, shades C2 and B2. A total of 54 specimens were obtained (18 for each composite resin), made of a Teflon matrix (15 mm in diameter and 2 mm in height). The color measurements were obtained with a Spectrophotometer, (PCB 6807 BYK Gardner) before and after AAA. Data were submitted to the Kolmogorov-Smirnov test (α >0.05), ANOVA and Tukey test (α 3). Considering the variable ∆E, it was observed that the color tone C2 was already statistically different for the microhybrid composite resin prior to AAA (P aging the composite resin hybrid of higher viscosity B2 showed the highest color variation rate and microhybrid with zirconium/silica C2 showed the lowest. All composite resins presented unacceptable color changes after 382 h of aging and different composite resins with same hue, presented different colors before being subjected to the aging process (B2 and C2) and after (B2). It was also observed color difference within a group of the same composite resin and same hue.

Bidirectional Flower Color and Shape Changes Allow a Second Opportunity for Pollination

NARCIS (Netherlands)

Willmer, P.; Stanley, D.A.; Steijven, K.; Matthews, I.M.; Nuttman, C.V.

2009-01-01

Flowers act as "sensory billboards" with multiple signals (color, morphology, odor) attracting and manipulating potential pollinators [1]. Many use changing signals as indicators that visitation and/or pollination have occurred (2, 3]). Floral color change is commonly used to transmit this

Preliminary assessments of portable color spectrophotometer measurements of cotton color

Science.gov (United States)

Cotton in the U.S. is classified for color with the Uster® High Volume Instrument (HVI), using the parameters Rd (diffuse reflectance) and +b (yellowness). It has been reported that some cotton bales, especially those transported overseas, appear to have changed significantly in color from their in...

Color Stability of Enamel following Different Acid Etching and Color Exposure Times

Directory of Open Access Journals (Sweden)

Arezoo Jahanbin

2014-06-01

Full Text Available Background and aims. The aim of this study was to evaluate the effect of different etching times on enamel color stability after immediate versus delayed exposure to colored artificial saliva (CAS. Materials and methods. Human first premolars were divided into five groups of twenty. A colorimeter was used according to the CIE system on the mid-buccal and mid-lingual surfaces to evaluate initial tooth color. Samples in group A remained unetched. In groups B to E, buccal and lingual surfaces were initially etched with phosphoric acid for 15 and 60 seconds, respectively. Then, the samples in groups A and C were immersed in colored artificial saliva (cola+saliva. In group B, the teeth were immersed in simple artificial saliva (AS. Samples in groups D and E were immersed in AS for 24 and 72 hours, respectively before being immersed in colored AS. The teeth were immersed for one month in each solution before color measurement. During the test period, the teeth were retrieved from the staining solution and stored in AS for five minutes. This was repeated 60 times. Color changes of buccal and lingual surfaces were calculated. Kruskal-Wallis and Wilcoxon tests were used for statistical analysis (α ≤ 0.05. Results. There were no significant differences between the groups in term of ΔE of buccal (P = 0.148 and lingual surfaces (P = 0.73. Conclusion. Extended time of etching did not result in significant enamel color change. Immediate and delayed exposure of etched enamel to staining solutions did not result in clinically detectable tooth color changes.

Assessment of Color Changes in Vita 3D-Master Shade Guide after Sterilization and Disinfection

Directory of Open Access Journals (Sweden)

Hossein Dashti

2017-06-01

Full Text Available Purpose:Dental shade guides are commonly used for color determination and should be disinfected and sterilized. The purpose of this study was to evaluate the color change of Vita 3D Master shade tabs after disinfection and sterilization. Material and methods:Overall, 98 samples (shade tabs were randomly selected from 14 new, unused Vita 3D sets, including the following shades: 2M1, 3L1.5, 3M1, 3M2, 3M3, 3R1.5 and 4M1. In each set, values of 2, 3 and 4, chroma of 1, 2 and 3 and hue were selected for the comparison of different shades. All tabs were measured using the Vita Easyshade device at baseline. The first group was disinfected with Deconex and the second group was sterilized by autoclaving in a simulated annual application. All the tabs were measured again using the same device. This process was repeated to simulate 2 and 3 years of usage. Statistical analysis was conducted by repeated measures analysis of variance (ANOVA and independent t-test and paired sample t-test. Results:In the disinfected group, we observed significant differences in value and chroma in all periods (p˂0.001. However, hue showed no significant difference after the first year of simulated treatment (p=0.527, though it was significantly different in the second and third simulations (p˂0.001. In the sterilized group, all variables showed a significant difference for each year (p˂0.05. Considering total color difference (ΔE, there was a significant difference between the two groups in the first, second and third simulated years; ΔE increased in the sterilized group more than in the disinfected samples (p˂0.001.  Conclusions:  The color change of shade tabs was significant both after disinfection by a chemical solution and by sterilization through autoclaving. However, although disinfectants may not have a clinically important effect, sterilization should be considered as an interfering factor during color-matching procedure.

Six-month color change and water sorption of 9 new-generation flowable composites in 6 staining solutions.

Science.gov (United States)

Arregui, Maria; Giner, Luis; Ferrari, Marco; Vallés, Marta; Mercadé, Montserrat

2016-11-28

Color match and water sorption are two factors that affect restorative materials. Discoloration is essential in the lifespan of restorations. The aim of this study was to evaluate color change and water sorption of nine flowable composites at multiple time points over 6 months. 60 samples of each composite were divided into two groups (Color Change and Water Sorption/Solubility). Each Color Change group was divided into six subgroups, which were immersed in distilled water (DW), coffee (CF), Coca-Cola (CC), red wine (RW), tea (TE) and orange juice (OJ). The color was measured at the baseline, 1, 2, 3 and 4 weeks, and 3 and 6 months and color change values (ΔE) were calculated. Each Water Sorption [WS]/Solubility [WL] group was tested according to ISO 4049:2009. The data were evaluated using two-way ANOVA, Fisher's post-hoc test and Pearson's correlation test. The composite with the lowest ΔE differed for each solution: Filtek™ Bulk Fill in DW (∆E = 0.73 (0.17-1.759)); Vertise Flow in CF (∆E = 14.75 (7.91-27.41)), in TE (∆E = 7.27 (2.81-24.81)) and OJ (∆E = 3.17 (0.87-9.92)); Tetric EvoFlow® in CC (∆E = 1.27 (0.45-4.02)); and Filtek™ Supreme XTE in RW (∆E = 8.88 (5.23-19.59)). RW caused the most discoloration (∆E = 23.62 (4.93-51.36)). Vertise Flow showed the highest water sorption (WS = 69.10 ± 7.19). The Pearson test showed statistically significant positive correlations between water sorption and solubility and between water sorption and ∆E; the positive solubility-∆E correlation was not statistically significant. The findings suggest that water sorption is one factor associated with the ability of composites to discolor; however, discoloration is a multifactorial problem.

Color changes and acrylamide formation in fried potato slices

DEFF Research Database (Denmark)

Pedreschi, Franco; Moyano, Pedro; Kaack, Karl

2005-01-01

The objective of this work was to study the kinetics of browning during deep-fat frying of blanched and unblanched potato chips by using the dynamic method and to find a relationship between browning development and acrylamide formation. Prior to frying, potato slices were blanched in hot water...... at 85degreesC for 3.5 min. Unblanched slices were used as the control. Control and blanched potato slices (Panda variety, diameter: 37 mm, width: 2.2 mm) were fried at 120, 150 and 180degreesC until reaching moisture contents of similar to1.8% (total basis) and their acrylamide content and final color...... were measured. Color changes were recorded at different sampling times during frying at the three mentioned temperatures using the chromatic redness parameter a(*). Experimental data of surface temperature, moisture content and color change in potato chips during frying were fit to empirical...

A new type of change blindness: smooth, isoluminant color changes are monitored on a coarse spatial scale.

Science.gov (United States)

Goddard, Erin; Clifford, Colin W G

2013-04-22

Attending selectively to changes in our visual environment may help filter less important, unchanging information within a scene. Here, we demonstrate that color changes can go unnoticed even when they occur throughout an otherwise static image. The novelty of this demonstration is that it does not rely upon masking by a visual disruption or stimulus motion, nor does it require the change to be very gradual and restricted to a small section of the image. Using a two-interval, forced-choice change-detection task and an odd-one-out localization task, we showed that subjects were slowest to respond and least accurate (implying that change was hardest to detect) when the color changes were isoluminant, smoothly varying, and asynchronous with one another. This profound change blindness offers new constraints for theories of visual change detection, implying that, in the absence of transient signals, changes in color are typically monitored at a coarse spatial scale.

Effect of Bleaching on Color Change and Surface Topography of Composite Restorations

OpenAIRE

Pruthi, Gunjan; Jain, Veena; Kandpal, H. C.; Mathur, Vijay Prakash; Shah, Naseem

2010-01-01

This study was conducted to determine the effect of 15% carbamide peroxide bleaching agent on color change and surface topography of different composite veneering materials (Filtek Z350 (3M ESPE), Esthet X (Dentsply India), and Admira (Voco, Germany). Methods. 30 samples were fabricated for evaluation of color change using CIELAB color system and Gonioreflectometer (GK 311/M, ZEISS). 45 disc-shaped specimens were made for evaluation of surface topography after bleaching (Nupro White Gold; Den...

Heat-induced chemical and color changes of extractive-free Black Locust (Rosinia Pseudoacacia) wood

Science.gov (United States)

Yao Chen; Jianmin Gao; Yongming Fan; Mandla A. Tshabalala; Nicole M. Stark

2012-01-01

To investigate chemical and color changes of the polymeric constituents of black locust (Robinia pseudoacacia) wood during heat treatment, extractive-free wood flour was conditioned to 30% initial moisture content (MC) and heated for 24 h at 120 °C in either an oxygen or nitrogen atmosphere. The color change was measured using the CIELAB color system. Chemical changes...

Using color histogram normalization for recovering chromatic illumination-changed images.

Science.gov (United States)

Pei, S C; Tseng, C L; Wu, C C

2001-11-01

We propose a novel image-recovery method using the covariance matrix of the red-green-blue (R-G-B) color histogram and tensor theories. The image-recovery method is called the color histogram normalization algorithm. It is known that the color histograms of an image taken under varied illuminations are related by a general affine transformation of the R-G-B coordinates when the illumination is changed. We propose a simplified affine model for application with illumination variation. This simplified affine model considers the effects of only three basic forms of distortion: translation, scaling, and rotation. According to this principle, we can estimate the affine transformation matrix necessary to recover images whose color distributions are varied as a result of illumination changes. We compare the normalized color histogram of the standard image with that of the tested image. By performing some operations of simple linear algebra, we can estimate the matrix of the affine transformation between two images under different illuminations. To demonstrate the performance of the proposed algorithm, we divide the experiments into two parts: computer-simulated images and real images corresponding to illumination changes. Simulation results show that the proposed algorithm is effective for both types of images. We also explain the noise-sensitive skew-rotation estimation that exists in the general affine model and demonstrate that the proposed simplified affine model without the use of skew rotation is better than the general affine model for such applications.

Temperature and ontogenetic effects on color change in the larval salamander species Ambystoma barbouri and Ambystoma texanum

Energy Technology Data Exchange (ETDEWEB)

Garcia, T S; Straus, R; Sih, A [Univ. of Kentucky, Dept. of Biological Sciences, Lexington, Kentucky (United States)

2003-04-01

Temperature has been shown to affect body color in several species of amphibians. The interaction between color and temperature may also change over larval ontogeny, perhaps because of age-related or seasonal changes in selection pressures on color. We quantified the effects of temperature on the color of the salamander sister species Ambystoma barbouri and Ambystoma texanum over larval ontogeny. We found that early-stage larvae responded to cold temperatures with a dark color relative to that of the warm temperature response. Both species then exhibited an ontogenetic shift in larval color, with larvae becoming lighter with age. Interestingly, older larvae showed decreased plasticity in color change to temperature when compared with younger stages. Older A. texanum larvae exhibited a reversal in the direction of color change, with cold temperatures inducing a lighter color relative to warm temperatures. We suggest that the overall pattern of color change (a plastic color response to temperature for young larvae, a progressive lightening of larvae over development, and an apparent loss of color plasticity to temperature over ontogeny) can be plausibly explained by seasonal changes in environmental factors (temperature, ultraviolet radiation) selecting for body color. (author)

Temperature and ontogenetic effects on color change in the larval salamander species Ambystoma barbouri and Ambystoma texanum

International Nuclear Information System (INIS)

Garcia, T.S.; Straus, R.; Sih, A.

2003-01-01

Temperature has been shown to affect body color in several species of amphibians. The interaction between color and temperature may also change over larval ontogeny, perhaps because of age-related or seasonal changes in selection pressures on color. We quantified the effects of temperature on the color of the salamander sister species Ambystoma barbouri and Ambystoma texanum over larval ontogeny. We found that early-stage larvae responded to cold temperatures with a dark color relative to that of the warm temperature response. Both species then exhibited an ontogenetic shift in larval color, with larvae becoming lighter with age. Interestingly, older larvae showed decreased plasticity in color change to temperature when compared with younger stages. Older A. texanum larvae exhibited a reversal in the direction of color change, with cold temperatures inducing a lighter color relative to warm temperatures. We suggest that the overall pattern of color change (a plastic color response to temperature for young larvae, a progressive lightening of larvae over development, and an apparent loss of color plasticity to temperature over ontogeny) can be plausibly explained by seasonal changes in environmental factors (temperature, ultraviolet radiation) selecting for body color. (author)

Color changes of esthetic orthodontic ligatures evaluated by orthodontists and patients: a clinical study

Directory of Open Access Journals (Sweden)

Edilene Kawabata

Full Text Available ABSTRACT Objective: To evaluate in vivo changes in the color of esthetic elastomeric ligatures from different manufacturers. Methods: Four widely used commercial brands of elastomeric ligatures were selected and used in 20 adult patients in a split-mouth design. The ligatures were evaluated by orthodontists and patients in a double-blind manner on the day the ligatures were placed (T0 and 30 days after intraoral exposure (T1 by means of a system of staining scores. Groups were compared by Friedman test with p 0.05. Results showed that all brands underwent significant staining when exposed to the intraoral environment. Modular-crystal MorelliTM (Sorocaba, SP, Brazil showed the highest degree of staining with the median reaching the maximum value (3; while the other brands (3M UnitekTM, American OrthodonticsTM and GAC DentsplyTM showed the median equal to 1 (p < 0.001. A large individual variability in the degree of staining was also found for all brands. Conclusions: All four brands of esthetic ligatures showed significant staining, which appeared to be more pronounced for the MorelliTM brand. Changes in color of the elastomeric ligatures were perceived similarly by patients and orthodontists. The industry needs to improve the color stability of esthetic ligatures.

Effects of Fibers on Color and Translucency Changes of Bulk-Fill and Anterior Composites after Accelerated Aging

Directory of Open Access Journals (Sweden)

Ali Riza Tuncdemir

2018-01-01

Full Text Available The aim of this study was to determine the effects of glass and polyethylene fibers on the color and translucency change of bulk-fill and anterior composites before and after artificial accelerated aging (AAA. Two types of teflon molds were used to fabricate samples which were 13 mm in diameter and, respectively, 2 mm and 4 mm in height. Polyethylene fiber (PF and glass fiber (GF were incorporated in the middle of the composite samples. Color and translucency changes of each composite were evaluated before and after AAA with spectrophotometer. ANOVA and Tukey’s HSD post hoc statistical analysis were used at a significance level of 0.05. Before AAA (for anterior composites, there were no significant differences in L* and b* parameters among the three groups (p>0.05; there were no significant differences in L* parameter between PF and GF groups or in TP between GF and control groups (p>0.05 (for bulk-fill composites. After AAA, there were no significant differences in L* parameter between GF and control groups, in a* parameter between PF and control groups, in b* parameter among all groups, or in TP parameter between GF and control groups (p>0.05. Fiber reinforcement led to color and TP change in both anterior and bulk-fill resin composites.

Effect of Accelerated Aging on Color Change of Direct and Indirect Fiber-Reinforced Composite Restorations

Directory of Open Access Journals (Sweden)

Masomeh Hasani Tabatabaei

2016-10-01

Full Text Available Objectives: The aim of this study was to assess the effect of artificial accelerated aging (AAA on color change of direct and indirect fiber-reinforced composite (FRC restorations.Materials and Methods: Direct (Z250 and indirect (Gradia composite resins were reinforced with glass (GF and polyethylene fibers (PF based on the manufacturers’ instructions. Forty samples were fabricated and divided into eight groups (n=5. Four groups served as experimental groups and the remaining four served as controls. Color change (∆E and color parameters (∆L*, ∆a*, ∆b* were read at baseline and after AAA based on the CIELAB system. Three-way ANOVA and Tukey’s test were used for statistical analysis.Results: Significant differences were found in ΔE, ΔL*, Δa* and Δb* among the groups after AAA (P<0.05. Most of the studied samples demonstrated an increase in lightness and a red-yellow shift after AAA.Conclusions: The obtained ∆E values were unacceptable after AAA (∆E≥ 3.3. All indirect samples showed a green-blue shift with a reduction in lightness except for Gradia/PF+ NuliteF.Keywords: Aging; Composite Resins; Color

Six-month color change and water sorption of 9 new-generation flowable composites in 6 staining solutions

Directory of Open Access Journals (Sweden)

Maria ARREGUI

Full Text Available Abstract Color match and water sorption are two factors that affect restorative materials. Discoloration is essential in the lifespan of restorations. The aim of this study was to evaluate color change and water sorption of nine flowable composites at multiple time points over 6 months. 60 samples of each composite were divided into two groups (Color Change and Water Sorption/Solubility. Each Color Change group was divided into six subgroups, which were immersed in distilled water (DW, coffee (CF, Coca-Cola (CC, red wine (RW, tea (TE and orange juice (OJ. The color was measured at the baseline, 1, 2, 3 and 4 weeks, and 3 and 6 months and color change values (ΔE were calculated. Each Water Sorption [WS]/Solubility [WL] group was tested according to ISO 4049:2009. The data were evaluated using two-way ANOVA, Fisher’s post-hoc test and Pearson’s correlation test. The composite with the lowest ΔE differed for each solution: Filtek™ Bulk Fill in DW (∆E = 0.73 (0.17–1.759; Vertise Flow in CF (∆E = 14.75 (7.91–27.41, in TE (∆E = 7.27 (2.81–24.81 and OJ (∆E = 3.17 (0.87–9.92; Tetric EvoFlow® in CC (∆E = 1.27 (0.45–4.02; and Filtek™ Supreme XTE in RW (∆E = 8.88 (5.23–19.59. RW caused the most discoloration (∆E = 23.62 (4.93–51.36. Vertise Flow showed the highest water sorption (WS = 69.10 ± 7.19. The Pearson test showed statistically significant positive correlations between water sorption and solubility and between water sorption and ∆E; the positive solubility-∆E correlation was not statistically significant. The findings suggest that water sorption is one factor associated with the ability of composites to discolor; however, discoloration is a multifactorial problem.

Change in Color and Volatile Composition of Skim Milk Processed with Pulsed Electric Field and Microfiltration Treatments or Heat Pasteurization.

Science.gov (United States)

Chugh, Anupam; Khanal, Dipendra; Walkling-Ribeiro, Markus; Corredig, Milena; Duizer, Lisa; Griffiths, Mansel W

2014-04-23

Non-thermal processing methods, such as pulsed electric field (PEF) and tangential-flow microfiltration (TFMF), are emerging processing technologies that can minimize the deleterious effects of high temperature short time (HTST) pasteurization on quality attributes of skim milk. The present study investigates the impact of PEF and TFMF, alone or in combination, on color and volatile compounds in skim milk. PEF was applied at 28 or 40 kV/cm for 1122 to 2805 µs, while microfiltration (MF) was conducted using membranes with three pore sizes (lab-scale 0.65 and 1.2 µm TFMF, and pilot-scale 1.4 µm MF). HTST control treatments were applied at 75 or 95 °C for 20 and 45 s, respectively. Noticeable color changes were observed with the 0.65 µm TFMF treatment. No significant color changes were observed in PEF-treated, 1.2 µm TFMF-treated, HTST-treated, and 1.4 µm MF-treated skim milk ( p ≥ 0.05) but the total color difference indicated better color retention with non-thermal preservation. The latter did not affect raw skim milk volatiles significantly after single or combined processing ( p ≥ 0.05), but HTST caused considerable changes in their composition, including ketones, free fatty acids, hydrocarbons, and sulfur compounds ( p < 0.05). The findings indicate that for the particular thermal and non-thermal treatments selected for this study, better retention of skim milk color and flavor components were obtained for the non-thermal treatments.

Change in Color and Volatile Composition of Skim Milk Processed with Pulsed Electric Field and Microfiltration Treatments or Heat Pasteurization

Directory of Open Access Journals (Sweden)

Anupam Chugh

2014-04-01

Full Text Available Non-thermal processing methods, such as pulsed electric field (PEF and tangential-flow microfiltration (TFMF, are emerging processing technologies that can minimize the deleterious effects of high temperature short time (HTST pasteurization on quality attributes of skim milk. The present study investigates the impact of PEF and TFMF, alone or in combination, on color and volatile compounds in skim milk. PEF was applied at 28 or 40 kV/cm for 1122 to 2805 µs, while microfiltration (MF was conducted using membranes with three pore sizes (lab-scale 0.65 and 1.2 µm TFMF, and pilot-scale 1.4 µm MF. HTST control treatments were applied at 75 or 95 °C for 20 and 45 s, respectively. Noticeable color changes were observed with the 0.65 µm TFMF treatment. No significant color changes were observed in PEF-treated, 1.2 µm TFMF-treated, HTST-treated, and 1.4 µm MF-treated skim milk (p ≥ 0.05 but the total color difference indicated better color retention with non-thermal preservation. The latter did not affect raw skim milk volatiles significantly after single or combined processing (p ≥ 0.05, but HTST caused considerable changes in their composition, including ketones, free fatty acids, hydrocarbons, and sulfur compounds (p < 0.05. The findings indicate that for the particular thermal and non-thermal treatments selected for this study, better retention of skim milk color and flavor components were obtained for the non-thermal treatments.

Tooth color change caused by photosensitizers after photodynamic therapy: An in vitro study.

Science.gov (United States)

Costa, Larissa Menezes; Matos, Felipe de Souza; Correia, Ayla Macyelle de Oliveira; Carvalho, Nayane Chagas; Faria-E-Silva, André Luís; Paranhos, Luiz Renato; Ribeiro, Maria Amália Gonzaga

2016-07-01

This study aimed to perform an in vitro evaluation of the effect of photosensitizers used in photodynamic therapy (PDT) on tooth color change when used in combination with conventional endodontic treatment. Forty extracted human mandibular premolars were accessed and underwent root canal therapy and PDT. Photosensitizers were used in accordance with the experimental groups: MB (n=10) - PDT with Methylene Blue at 0.01%; TB (n=10) - PDT with Toluidine Blue at 0.01%; MG (n=10) - PDT with Malachite Green at 0.01%, at the concentration of 0.1mg/mL; and PC (n=10) - positive control, PDT with Endo-PTC cream stained with Methylene Blue at 25%. The samples were irradiated with 660-nm diode laser by means of a 330-μm-diameter optical fiber cable at a power density of 40mW for 120s. After light curing, the photosensitizers were removed from the specimens with 10mL sodium hypochlorite at 1%. A reflectance spectrometer was used for evaluation of color prior to and 60days after the experimental procedure based on the CIE L*a*b* system. According to ANOVA test, there were statistically significant differences between the experimental groups (p=0.003). Tukey's test showed a significant difference between PC and TB (p=0.008), as well as between MG and TB (p=0.009). However, there was no statistically significant difference between PC, MG (p=0.957) and MB (p=0.103). It was concluded that the use of PDT as an adjuvant to root canal therapy, using different photosensitizers, led to color change in tooth structure. Copyright © 2016 Elsevier B.V. All rights reserved.

A one-step colorimetric acid-base titration sensor using a complementary color changing coordination system.

Science.gov (United States)

Cho, Hui Hun; Kim, Si Hyun; Heo, Jun Hyuk; Moon, Young Eel; Choi, Young Hun; Lim, Dong Cheol; Han, Kwon-Hoon; Lee, Jung Heon

2016-06-21

We report the development of a colorimetric sensor that allows for the quantitative measurement of the acid content via acid-base titration in a single-step. In order to create the sensor, we used a cobalt coordination system (Co-complex sensor) that changes from greenish blue colored Co(H2O)4(OH)2 to pink colored Co(H2O)6(2+) after neutralization. Greenish blue and pink are two complementary colors with a strong contrast. As a certain amount of acid is introduced to the Co-complex sensor, a portion of greenish blue colored Co(H2O)4(OH)2 changes to pink colored Co(H2O)6(2+), producing a different color. As the ratio of greenish blue and pink in the Co-complex sensor is determined by the amount of neutralization reaction occurring between Co(H2O)4(OH)2 and an acid, the sensor produced a spectrum of green, yellow green, brown, orange, and pink colors depending on the acid content. In contrast, the color change appeared only beyond the end point for normal acid-base titration. When we mixed this Co-complex sensor with different concentrations of citric acid, tartaric acid, and malic acid, three representative organic acids in fruits, we observed distinct color changes for each sample. This color change could also be observed in real fruit juice. When we treated the Co-complex sensor with real tangerine juice, it generated diverse colors depending on the concentration of citric acid in each sample. These results provide a new angle on simple but quantitative measurements of analytes for on-site usage in various applications, such as in food, farms, and the drug industry.

Radiation detection using the color changes of lilac spodumene

International Nuclear Information System (INIS)

Oliveira, Raquel A.P.; Mello, Ana Carolina S.; Lima, Hestia R.B.R.; Campos, Simara Santos; Souza, Suzana O.

2009-01-01

The use of radiation in industrial processes currently offers several advantages in the field of sterilization of medical and pharmaceuticals products, the preservation of food, and a variety of other products widely used in modern society. A dosimetry of confidence is a key parameter for the quality assurance of radiation processing and the irradiated products. This work investigates dosimetric properties in natural spodumene, LiAlSi 2 O 6 , called kunzite, from Minas Gerais State, Brazil. After X irradiation on the samples in powder form was detected a change in color of the crystal where the dose received. This makes a possible viability of this material is applied in research on development of radiation detectors using the change in color of purple spodumene. (author)

Color printing enabled by phase change materials on paper substrate

Science.gov (United States)

Ji, Hong-Kai; Tong, Hao; Qian, Hang; Liu, Nian; Xu, Ming; Miao, Xiang-Shui

2017-12-01

We have coated phase change materials (PCMs) on rough and flexible substrates to achieve multicolor changeable devices. The principle of the device is based on an earlier discovery that lights have strong interference effect in PCM films, leading to various colors by reflection. In this work, paper substrates are laminated by parylene layers to protect the device from water before coated with functional PCM films. The PCM-based color printing (PCP) on paper is not affected by rough surfaces and shows a similar color appearance as that on smooth surfaces. In particular, the color-printed device can be patterned by UV lithography to display a clear and tunable optical image, and it exhibits a low sensitivity to the angle of view. Such PCP has potential applications for low-cost, disposable, and flexible displays.

Investigation Of The Color Changing Properties Of Wood Stain Derived From Pinar Leaves

Directory of Open Access Journals (Sweden)

Abdi Atılgan

2011-11-01

Full Text Available This study was designed to develop an environmentally friendly wood stain derived pinar (Quercus aucheri leaves and determine the color stability of this stain when exposed to UV light irradiation. Wood stains derived from pinar leaves were prepared from aqueous solution with %3 iron (FeSO4.7H2O , % 5 alum ((KAl(SO42.12H2O, and % 10 vinegar mordant mixtures. Scots pine (Pinus sylvestris L., Turkish oriental beech (Fagus orientalis Lipsky and oak (Quercus petraea L. wood specimens were used as staining substrates. After treatment with the stain, the wood panels were exposed to UV light irradiation for periods of 100, 200, and 300 hours and determinated the total color changes was according to ISO 2470 standards. Results showed that wood stain derived from pinar extract provided some color stability after UV irradiation. According to results, Scots pine specimens treated with the pinar extract + iron mixture provided the smallest total color changes. Meanwhile the highest total color change provided on the Scots pine treated with pinar extract+alum mixture.

Exploring transgender legal name change as a potential structural intervention for mitigating social determinants of health among transgender women of color.

Science.gov (United States)

Hill, Brandon J; Crosby, Richard; Bouris, Alida; Brown, Rayna; Bak, Trevor; Rosentel, Kris; VandeVusse, Alicia; Silverman, Michael; Salazar, Laura

2018-03-01

The purpose of this exploratory study was to examine the effects of legal name change on socioeconomic factors, general and transgender-related healthcare access and utilization, and transgender-related victimization in a sample of young transgender women (transwomen) of color. A cross-sectional group comparison approach was used to assess the potential effects of legal name change. A convenience sample of young transwomen enrolled in a no-cost legal name change clinic were recruited to complete a 30-minute interviewer-guided telephone survey including sociodemographic and socioeconomic factors, health and well-being, health care utilization, transgender transition-related health care, and transgender-related victimization. Sixty-five transgender women of color (37 = pre-name change group; 28 = post-name change group) completed the survey. Results indicated that the transwomen in the post-name change group were significantly older than the pre-name change group. In age-adjusted analyses, the post-name change group was significantly more likely to have a higher monthly income and stable housing than the pre-name change group. No significant differences were observed for general healthcare utilization; however, a significantly greater percentage of transwomen in the pre-name change group reported postponing medical care due to their gender identity. In addition, a significantly larger proportion of transwomen in the pre-name change group reported using non-prescribed hormones injected by friends and experiencing verbal harassment by family and friends compared to transwomen in the post-name change group. Findings suggest that legal name change may be an important structural intervention for low-income transwomen of color, providing increased socioeconomic stability and improved access to primary and transition-related health care.

Effects of surface-finishing protocols on the roughness, color change, and translucency of different ceramic systems.

Science.gov (United States)

Akar, Gülcan Coşkun; Pekkan, Gürel; Çal, Ebru; Eskitaşçıoğlu, Gürcan; Özcan, Mutlu

2014-08-01

Surface-finishing protocols have a mechanical impact on ceramic surfaces that could eventually affect surface topography and light scattering. An optimum protocol is needed to avoid damaging the optical properties of ceramics. The purpose of this study was to determine the effects of different surface-finishing protocols on the surface roughness, color change, and translucency of ceramic and metal ceramic restorations. Standardized disk-shaped specimens (1.5 × 10 mm, n=128) were fabricated from 3 different ceramic core materials (aluminum oxide [Al2O3]-AL, zirconium oxide [ZrO2]-ZR, lithium disilicate [Li2Si2O5]-LIT), veneered (V) with dentin ceramics (n=32 per group), and placed in the following groups: ALV, ZRV, and LITV. The metal ceramic group acted as the control (n=32). Four different surface-finishing methods were tested. Airborne-particle abrasion with 50 μm Al2O3, polishing with adjustment kit, polishing with adjustment kit plus diamond polishing paste, and autoglazing (n=8 subgroup) were applied on the veneering ceramics. The specimens were analyzed with a profilometer for surface roughness, and color change and translucency were measured with a clinical spectrophotometer. Statistical analyses were performed with 1-way ANOVA and the Tukey honest significant difference tests (α=.05). Specimens treated with the airborne particle abrasion method showed significantly higher mean profilometer for surface roughness values in all groups (P.05). With the diamond polishing paste method, lower surface roughness values were achieved in the ZRV and metal ceramic groups acted as the control groups. Different surface-finishing methods affected the color change of the ceramic systems, except for ZRV. Surface-finishing protocols significantly affected the translucency values of the ALV, LITV, and metal ceramic groups (Pceramics tested. The airborne-particle abrasion protocol created rougher surfaces and decreased translucency, and color change in zirconia was not

Comparing Color Change Value of Three Types of Composite Resins in Distilled Water during the First 24 Hours after Exposure to Light

Directory of Open Access Journals (Sweden)

S Afkhami

2016-09-01

Full Text Available BACKGROUND AND OBJECTIVE: Color change of composite resin restorations is one the most common causes for replacing these restorations, which might occur due to internal and external factors. This research was carried out to study and compare color change value of three types of composite resins in distilled water during the first 24 hours after exposure to light. METHODS: In this laboratory research, 120 samples were prepared from three types of composites (Z350, Z250 and Heliomolar and were divided into 3 groups of 40. Samples with 2 mm thickness and 7 mm diameter were prepared. After assessing the initial color by spectrophotometer, samples were exposed to distilled water for 1, 6, 12 and 24 hours, respectively. Then, the final color was assessed by EasyShade device and the color change value (ΔE was calculated for all samples. Moreover, ΔE<3.3 was clinically acceptable. FINDINGS: In 12h group, Heliomolar composite showed lowest color change value compared with two other composites (Z350=1.385, Z250=1.179 and Heliomolar=0.854 (p<0.05, while no significant difference was observed in other groups. Furthermore, lowest color change value in each composite was observed 1 hour after curing (Z350=0.352, Z250=0.641 and Heliomolar=0.298 and color change value increased 24 hours after curing (Z350=1.888, Z250=1.903 and Heliomolar=1.929. CONCLUSION: Results of the study revealed that color change value of all three composites in distilled water was less than 3.3 after 24 hours and it was clinically acceptable

Shear bond strength of metallic and ceramic brackets using color change adhesives.

Science.gov (United States)

Stumpf, Aisha de Souza Gomes; Bergmann, Carlos; Prietsch, José Renato; Vicenzi, Juliane

2013-01-01

To determine the shear bond strength of orthodontic brackets using color change adhesives that are supposed to aid in removing excess of bonding material and compare them to a traditional adhesive. Ninety metallic and ninety ceramic brackets were bonded to bovine incisors using two color change adhesives and a regular one. A tensile stress was applied by a universal testing machine. The teeth were observed in a microscope after debonding in order to determine the Adhesive Remnant Index (ARI). The statistical analysis (ANOVA, Tukey, and Kruskall-Wallis tests) demonstrated that the mean bond strength presented no difference when metallic and ceramic brackets were compared, but the bond resistance values were significantly different for the three adhesives used. The most common ARI outcome was the entire adhesive remaining on the enamel. The bond strength was similar for metallic and ceramic brackets when the same adhesive system was used. ARI scores demonstrated that bonding with these adhesives is safe even when ceramic brackets were used. On the other hand, bond strength was too low for orthodontic purposes when Ortho Lite Cure was used.

Kinetics of heat-induced color change of a tuna-vegetable mixture

OpenAIRE

Scherer, Erika; Sandoval, Aleida J; Barreiro, José A

2009-01-01

Heat induced color change kinetics in a tuna-vegetable mixture was evaluated by measuring color parameter "L" (Hunter-Lab) and 5-hydroxi-methyl-furfural (5-HMF) accumulation. For this purpose small reusable stainless steel TDT cans were used and the kinetic studies performed in a temperature range characteristic of thermal processing of low acid canned foods (110-125°C). The color parameter L was better described by a pseudo zero order while a pseudo first order reaction was found for 5-HMF a...

Color printing enabled by phase change materials on paper substrate

Directory of Open Access Journals (Sweden)

Hong-Kai Ji

2017-12-01

Full Text Available We have coated phase change materials (PCMs on rough and flexible substrates to achieve multicolor changeable devices. The principle of the device is based on an earlier discovery that lights have strong interference effect in PCM films, leading to various colors by reflection. In this work, paper substrates are laminated by parylene layers to protect the device from water before coated with functional PCM films. The PCM-based color printing (PCP on paper is not affected by rough surfaces and shows a similar color appearance as that on smooth surfaces. In particular, the color-printed device can be patterned by UV lithography to display a clear and tunable optical image, and it exhibits a low sensitivity to the angle of view. Such PCP has potential applications for low-cost, disposable, and flexible displays.

The functional morphology of color changing in a spider: development of ommochrome pigment granules.

Science.gov (United States)

Insausti, Teresita C; Casas, Jérôme

2008-03-01

Studies on the formation of ommochrome pigment granules are very few, despite their generalized occurrence as screening pigments in insect eyes. This is particularly true for ommochrome granules responsible for epidermal coloration. The aims of this study were to characterize the localization of major body pigments in a color changing mimetic spider, Misumena vatia (Thomisidae), and to describe the formation and location of ommochrome pigment granules responsible for the spider's color change from white to yellow. The unpigmented cuticula of this spider is transparent. Both the guanine localized in guanine cells in the opisthosoma and the uric acid localized in epidermis cells in the prosoma are responsible for the white coloration. The bright yellow color is due to the combination of ommochrome pigment granules and the white reflectance from coincident guanine and/or uric acid. The formation of ommochrome pigment granules in epidermis cells proceeds via three distinctive steps. Translucent, UV fluorescent, progranules (type I) are produced by a dense network of endoplasmic reticulum associated with numerous mitochondria and glycogen rosettes. These progranules are present in white spiders only, and regularly distributed in the cytoplasm. The merging of several progranules of type I into a transient state (progranule type II) leads to the formation of granules (type III) characterized by their lack of fluorescence, their spherical sections and their osmophilic-electron-dense contents. They are found in yellow spiders and in the red stripes on the body sides. Their color varies from yellow to red. Thus, white spiders contain only type I granules, yellow tinted spiders contain type II and III granules and bright yellow spiders contain only type III granules. We present a synthetic view of the ontogeny of ommochrome granules. We discuss the physiology of color changing and the nature of the chemical compounds in the different types of granules. Extended studies on the

Change in Color and Volatile Composition of Skim Milk Processed with Pulsed Electric Field and Microfiltration Treatments or Heat Pasteurization †

Science.gov (United States)

Chugh, Anupam; Khanal, Dipendra; Walkling-Ribeiro, Markus; Corredig, Milena; Duizer, Lisa; Griffiths, Mansel W.

2014-01-01

Non-thermal processing methods, such as pulsed electric field (PEF) and tangential-flow microfiltration (TFMF), are emerging processing technologies that can minimize the deleterious effects of high temperature short time (HTST) pasteurization on quality attributes of skim milk. The present study investigates the impact of PEF and TFMF, alone or in combination, on color and volatile compounds in skim milk. PEF was applied at 28 or 40 kV/cm for 1122 to 2805 µs, while microfiltration (MF) was conducted using membranes with three pore sizes (lab-scale 0.65 and 1.2 µm TFMF, and pilot-scale 1.4 µm MF). HTST control treatments were applied at 75 or 95 °C for 20 and 45 s, respectively. Noticeable color changes were observed with the 0.65 µm TFMF treatment. No significant color changes were observed in PEF-treated, 1.2 µm TFMF-treated, HTST-treated, and 1.4 µm MF-treated skim milk (p ≥ 0.05) but the total color difference indicated better color retention with non-thermal preservation. The latter did not affect raw skim milk volatiles significantly after single or combined processing (p ≥ 0.05), but HTST caused considerable changes in their composition, including ketones, free fatty acids, hydrocarbons, and sulfur compounds (p < 0.05). The findings indicate that for the particular thermal and non-thermal treatments selected for this study, better retention of skim milk color and flavor components were obtained for the non-thermal treatments. PMID:28234317

THE EFFECT OF HEAT TREATMENT ON THE CHEMICAL AND COLOR CHANGE OF BLACK LOCUST (ROBINIA PSEUDOACACIA WOOD FLOUR

Directory of Open Access Journals (Sweden)

Yao Chen,

2012-01-01

Full Text Available The aim of this study was to investigate the effects of oxygen and moisture content (MC on the chemical and color changes of black locust (Robinia pseudoacacia wood during heat treatment. The wood flour was conditioned to different initial MCs and heated for 24 h at a constant temperature of 120ºC in either oxygen or nitrogen atmosphere. The pH values and chromaticity indexes were examined. Diffuse reflectance UV-Vis (DRUV and Fourier transform infrared (FTIR spectra were used to characterize the changes of chromophores upon heating. The study demonstrated that the pH values decreased after heat treatment, and it was lower when the heat treated was in oxygen than in nitrogen. The L* decreased significantly, while a* and b* increased. The total color difference ΔE* increased with increasing initial MC until a plateau was reached after 30% MC. The color change was greater in oxygen than in nitrogen. The hydroxyl groups decreased after heat treatment. The releases of acid and formation of quinoid compounds and carboxylic groups during heat treatment were confirmed. Discoloration of wood is due mainly to the condensation and oxidation reactions, which are accelerated by oxygen. Higher MCs are required to obtain the greatest color change of wood in inert atmosphere.

A method and results of color calibration for the Chang'e-3 terrain camera and panoramic camera

International Nuclear Information System (INIS)

Ren Xin; Li Chun-Lai; Liu Jian-Jun; Wang Fen-Fei; Yang Jian-Feng; Xue Bin; Liu En-Hai; Zhao Ru-Jin

2014-01-01

The terrain camera (TCAM) and panoramic camera (PCAM) are two of the major scientific payloads installed on the lander and rover of the Chang'e 3 mission respectively. They both use a Bayer color filter array covering CMOS sensor to capture color images of the Moon's surface. RGB values of the original images are related to these two kinds of cameras. There is an obvious color difference compared with human visual perception. This paper follows standards published by the International Commission on Illumination to establish a color correction model, designs the ground calibration experiment and obtains the color correction coefficient. The image quality has been significantly improved and there is no obvious color difference in the corrected images. Ground experimental results show that: (1) Compared with uncorrected images, the average color difference of TCAM is 4.30, which has been reduced by 62.1%. (2) The average color differences of the left and right cameras in PCAM are 4.14 and 4.16, which have been reduced by 68.3% and 67.6% respectively

Spatiotemporal phenological changes in fall foliage peak coloration in deciduous forest and the responses to climatic variation

Science.gov (United States)

Xie, Y.; Wilson, A. M.

2017-12-01

Plant phenology studies typically focus on the beginning and end of the growing season in temperate forests. We know too little about fall foliage peak coloration, which is a bioindicator of plant response in autumn to environmental changes, an important visual cue in fall associated with animal activities, and a key element in fall foliage ecotourism. Spatiotemporal changes in timing of fall foliage peak coloration of temperate forests and the associated environmental controls are not well understood. In this study, we examined multiple color indices to estimate Land Surface Phenology (LSP) of fall foliage peak coloration of deciduous forest in the northeastern USA using Moderate Resolution Imaging Spectroradiometer (MODIS) daily imagery from 2000 to 2015. We used long term phenology ground observations to validate our estimated LSP, and found that Visible Atmospherically Resistant Index (VARI) and Plant Senescence Reflectance Index (PSRI) were good metrics to estimate peak and end of leaf coloration period of deciduous forest. During the past 16 years, the length of period with peak fall foliage color of deciduous forest at southern New England and northern Appalachian forests regions became longer (0.3 7.7 days), mainly driven by earlier peak coloration. Northern New England, southern Appalachian forests and Ozark and Ouachita mountains areas had shorter period (‒0.2 ‒9.2 days) mainly due to earlier end of leaf coloration. Changes in peak and end of leaf coloration not only were associated with changing temperature in spring and fall, but also to drought and heat in summer, and heavy precipitation in both summer and fall. The associations between leaf peak coloration phenology and climatic variations were not consistent among ecoregions. Our findings suggested divergent change patterns in fall foliage peak coloration phenology in deciduous forests, and improved our understanding in the environmental control on timing of fall foliage color change.

Color change at the push of a buttom; Farbwechsel auf Knopfdruck

Energy Technology Data Exchange (ETDEWEB)

Mortimer, Roger J. [Loughborough Univ. (United Kingdom)

2013-05-15

Materials with electrically switchable color open up many fascinating application possibilities - from the glare protection on low-cost displays to adaptive camouflage. Electrochromic materials can be electrically switched between different colors back and forth. The effect is based on a change of light absorption by current induced oxidation and reduction processes. Meanwhile electrochromic materials cover the entire color spectrum. In addition, the electrochromic materials are inexpensive and consume little power. This makes them attractive for many applications. However, their response times are still relatively long. The first commercial products include mirrors with automatic anti-glare and aircraft windows that can be darkened electrically.

Color changing block copolymer films for chemical sensing of simple sugars.

Science.gov (United States)

Ayyub, Omar B; Sekowski, Jennifer W; Yang, Ta-I; Zhang, Xin; Briber, Robert M; Kofinas, Peter

2011-10-15

We investigated the use of functionalized photonic block copolymer films for the detection of glucose. Polystyrene-b-poly(2-vinyl pyridine) (PS-b-P2VP) block copolymers were chemically functionalized with 2-(bromomethyl)phenylboronic acid and cast into films that reflect a visible color when exposed to aqueous media. The 2-(bromomethyl)phenylboronic acid functionality can reversibly bind to glucose. When exposed to high concentrations of glucose the polymer responded with a red shift in color. Low concentration exposure of glucose caused the polymer films to blue shift in color. The BCP films also exhibited a selective response to fructose, mannose or galactose, giving a different response depending on which sugar is present. The color of the polymer was tuned to blue, green, yellow or orange by varying the film's crosslink density. The color change can be visually observed without the use of equipment such as a spectrometer. Copyright © 2011 Elsevier B.V. All rights reserved.

Shear bond strength of metallic and ceramic brackets using color change adhesives

Directory of Open Access Journals (Sweden)

Aisha de Souza Gomes Stumpf

2013-04-01

Full Text Available OBJECTIVE: To determine the shear bond strength of orthodontic brackets using color change adhesives that are supposed to aid in removing excess of bonding material and compare them to a traditional adhesive. METHODS: Ninety metallic and ninety ceramic brackets were bonded to bovine incisors using two color change adhesives and a regular one. A tensile stress was applied by a universal testing machine. The teeth were observed in a microscope after debonding in order to determine the Adhesive Remnant Index (ARI. RESULTS: The statistical analysis (ANOVA, Tukey, and Kruskall-Wallis tests demonstrated that the mean bond strength presented no difference when metallic and ceramic brackets were compared but the bond resistance values were significantly different for the three adhesives used. The most common ARI outcome was the entire adhesive remaining on the enamel. CONCLUSIONS: The bond strength was similar for metallic and ceramic brackets when the same adhesive system was used. ARI scores demonstrated that bonding with these adhesives is safe even when ceramic brackets were used. On the other hand, bond strength was too low for orthodontic purposes when Ortho Lite Cure was used.

Do focal colors look particularly "colorful"?

Science.gov (United States)

Witzel, Christoph; Franklin, Anna

2014-04-01

If the most typical red, yellow, green, and blue were particularly colorful (i.e., saturated), they would "jump out to the eye." This would explain why even fundamentally different languages have distinct color terms for these focal colors, and why unique hues play a prominent role in subjective color appearance. In this study, the subjective saturation of 10 colors around each of these focal colors was measured through a pairwise matching task. Results show that subjective saturation changes systematically across hues in a way that is strongly correlated to the visual gamut, and exponentially related to sensitivity but not to focal colors.

Comparative evaluation of color change between two types of acrylic resin and flexible resin after thermo cycling. An in vitro study.

Science.gov (United States)

Hatim, Nadira A; Al-Tahho, Omar Zeno

2013-09-01

Evaluation of the effect of different beverages (tea with sugar, coffee with sugar, and Pepsi), and immersion time cycles (2, 4, and 12 weeks) on color change property, and dimensional change of Vertex Dental BV, Netherlands heat cured acrylic resin, recently modified Vertex Dental BV, Netherlands heat cured acrylic resin with additive (20 % banana oil), and Valplast(®) flexible resin (FR) denture base materials by using artificial saliva cycle. The total samples of this study for color, and dimensional changes were 360 samples, divided into three groups according to the type of the material, Vertex Dental BV, Netherlands heat cured acrylic resin, modified heat cured acrylic resin (Vertex with additive 20 % banana oil), and Valplast(®) FR groups, each group contains 120 samples. The thermal cycling used in this study was as follows: The samples were incubated in distilled water at 37 ± 1 °C for 2 days for conditioning. Then, the samples were immersed in beverage solutions for 10 min daily at 50 ± 1 °C temperature for tea, and coffee with sugar, while for Pepsi at 20 ± 1 °C. Then, the samples were immersed in artificial saliva at 37 ± 1 °C for 5 h, and 10 min. This cycle was repeated three times daily, and then the samples were immersed in distilled water at 22 ± 2 °C room temperature for 8 h at night. This cycle was repeated for 2, 4, and 12 weeks. At the end of each time period, the immersed samples were tested to evaluate the color change property. Descriptive statistics, ANOVA, and Duncan's multiple range tests were used to analyze the collected data. The results of this study showed that, in comparison between the materials at different times for colors L*a*b* properties, there were significant differences at P ≤ 0.05 except in color b* at 12 weeks, which showed no significant difference at P > 0.05 between materials. And there was a significant difference in dimensional change at P > 0.05 for different beverages

Color Appearance of the Neon Color Spreading Effect

Directory of Open Access Journals (Sweden)

Damir Vusić

2017-04-01

Full Text Available As a part of this paper, the influence of various parameters within the target process of graphic reproduction on the color appearance of the neon color spreading effect was investigated. The shift in a color appearance qualitatively is determined through the calculation of changes in perceptual attributes of color, i.e. differences in lightness, chroma and hue. The influence of different media (printed images, and LCD display in the “cross-media” system was examined, as well as the role of the inserted segment color choice and background of the primary stimulus as an element of design solutions. These parameters were evaluated in a variety of ambient conditions and under the observation of three CIE standard light sources and illuminants. It was found that it was mostly the changes of the chroma and lightness. The change in the color hue is the lowest.

RETENSI VANILIN DAN PERUBAHAN WARNA EKSTRAK PEKAT VANILI SELAMA PENYIMPANAN [Vanillin Retention and Color Changes of Concentrated Vanilla Extract During Storage

Directory of Open Access Journals (Sweden)

Mira Sofyaningsih1*

2011-12-01

Full Text Available The purpose of this research was to observe vanillin retention and color changes during storage of concentrated vanilla extract at the low temperature (10°C, room temperature (30°C, and high temperature (55°C for 49 days. The methodology of this research consisted of vanilla curing process, vanilla extraction, evaporation of vanilla extract, formulation of concentrated vanilla extract, and measuring the vanillin retention and color change.The best products of concentrated vanilla extract were made with formula containing 10 ml vanilla extract, 10 ml high fructose syrup (HFS 55% and 3 ml of carboxyl methyl cellulose (CMC solution 1% and that made with formula containing 10 ml vanilla extract, 15 ml glucose syrup 75°Brix and 3 ml of CMC solution 1%. The vanillin retention of both formulas had a trend to descrease. The pattern of vanillin retention and color change during storage of both formulas followed linear equations.Thetemperature and period of storage significantly affected the color of concentrated vanilla extract. Both formulas did not show any differences in vanillin retention and color during storage at refrigerator and room temperature.

Color changes in pork in relation to high pressure treatment

DEFF Research Database (Denmark)

Bak, Kathrine Holmgaard

treatment and during a six-day storage period was investigated via surface reflectance. Spectroscopic studies (in the form of surface reflectance, UV-vis, and circular dichroism) on the effect of HP treatment on the soluble protein fraction of porcine LD were conducted attempting to explain the color......-denatured ferric myoglobin species was not similar to the heat-denatured pigment, ferrihemochrome, but instead a closely related species sharing features of denatured gobin, ferric iron, and brown color. The reversibility of the pressure-induced changes often observed for various myoglobin forms in solution were...

Image analysis of skin color heterogeneity focusing on skin chromophores and the age-related changes in facial skin.

Science.gov (United States)

Kikuchi, Kumiko; Masuda, Yuji; Yamashita, Toyonobu; Kawai, Eriko; Hirao, Tetsuji

2015-05-01

Heterogeneity with respect to skin color tone is one of the key factors in visual perception of facial attractiveness and age. However, there have been few studies on quantitative analyses of the color heterogeneity of facial skin. The purpose of this study was to develop image evaluation methods for skin color heterogeneity focusing on skin chromophores and then characterize ethnic differences and age-related changes. A facial imaging system equipped with an illumination unit and a high-resolution digital camera was used to develop image evaluation methods for skin color heterogeneity. First, melanin and/or hemoglobin images were obtained using pigment-specific image-processing techniques, which involved conversion from Commission Internationale de l'Eclairage XYZ color values to melanin and/or hemoglobin indexes as measures of their contents. Second, a spatial frequency analysis with threshold settings was applied to the individual images. Cheek skin images of 194 healthy Asian and Caucasian female subjects were acquired using the imaging system. Applying this methodology, the skin color heterogeneity of Asian and Caucasian faces was characterized. The proposed pigment-specific image-processing techniques allowed visual discrimination of skin redness from skin pigmentation. In the heterogeneity analyses of cheek skin color, age-related changes in melanin were clearly detected in Asian and Caucasian skin. Furthermore, it was found that the heterogeneity indexes of hemoglobin were significantly higher in Caucasian skin than in Asian skin. We have developed evaluation methods for skin color heterogeneity by image analyses based on the major chromophores, melanin and hemoglobin, with special reference to their size. This methodology focusing on skin color heterogeneity should be useful for better understanding of aging and ethnic differences. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Clinical study of color Doppler sonography in Graves' disease blood flow changes after thyroid arteries embolization

International Nuclear Information System (INIS)

Zhuang Wenquan; Li Weiduo; Yang Jianyong; Chen Wei; Huang Yonghui; Guo Wenbo; Li Jiaping

2003-01-01

Objective: To study the color doppler image characteristics of thyroid arteries pre- and post-interventional procedure and to assess the clinical efficacy in Gnaves' disease. Methods: 11 from 31 patients diagnosed as Graves' disease undertaken thyroid arteries embolization, were analyzed. Color Doppler sonography was applied to monitor the pre-and post- procedure thyroid size and diameters of thyroid arteries. Power Doppler was used to detect the Vmax, Vmin, RI and blood flow. Results: After thyroid arteries embolization, the size and vascularity of thyroids were reduced. The thyroid arteries showed shrinkage and stoppage blood flow at the embolized site. The changes of RI, blood parameters of Vmax, Vmin and diameters of the thyroid arteries pre- and post-procedure turned out to be statistically significant for clinical restriction. Conclusion: The color Doppler sonography plays an important role for preoperative diagnosis and predicting the prognosis

Color change mechanism of niobium oxide thin film with incidental light angle and applied voltage

Energy Technology Data Exchange (ETDEWEB)

Komatsu, Isao [Course of Information Science and Technology, Graduate School of Science and Technology, Tokai University (Japan); Aoki, Hayata [Course of Electro Photo Optics, Graduate School of Engineering, Tokai University (Japan); Ebisawa, Mizue [Tokyo Metropolitan Industrial Technology Research Institute (Japan); Kuroda, Akihiro [Department of Optical and Imaging Science & Technology, Faculty of Engineering, Tokai University (Japan); Kuroda Consulting Incorporated (Japan); Kuroda, Koichi [Kuroda Consulting Incorporated (Japan); Maeda, Shuichi [Course of Information Science and Technology, Graduate School of Science and Technology, Tokai University (Japan); Course of Electro Photo Optics, Graduate School of Engineering, Tokai University (Japan); Department of Optical and Imaging Science & Technology, Faculty of Engineering, Tokai University (Japan)

2016-03-31

Niobium oxide thin layers made by the anodization process showed coloration owing to thin film interference. The reflection spectra depended on both the applied voltage and incident light angle. Large color differences were observed at incident light angles between 5° and 70°, when the applied voltage was over 60 V. In this study, we explored the cause of these results using ellipsometry and goniophotometry to understand the transition of optical constants and the reflection spectra with applied voltage. Finally, we concluded that the coloration of the reflection spectra, which included only a first-order interference peak, exhibits a smaller change because the first order interference peak has a wider half value width than higher order interference peaks. - Highlights: • We investigated color change of Nb{sub 2}O{sub 5} oxide thin layers with incidental light angle. • The reflection spectra shift to lower wavelength region with increasing incident light angle. • The reflection spectra shift to higher wavelength region with increasing applied voltage. • First-order interference has wider half value width, and exhibits small color change.

Accelerating Change for Women Faculty of Color in STEM: Policy, Action, and Collaboration

Science.gov (United States)

Hess, Cynthia; Gault, Barbara; Yi, Youngmin

2013-01-01

This report summarizes findings and recommendations from a convening, "Accelerating Change for Women Faculty of Color in STEM: Policy, Action, and Collaboration," that was designed to address the underrepresentation of women of color in STEM academic careers. The convening provided an opportunity for individuals who work in various…

Influence of Surrounding Colors in the Illuminant-Color Mode on Color Constancy

Directory of Open Access Journals (Sweden)

Kazuho Fukuda

2011-05-01

Full Text Available On color constancy, we showed that brighter surrounding colors had greater influence than dim colors (Uchikawa, Kitazawa, MacLeod, Fukuda, 2010 APCV. Increasing luminance of a stimulus causes the change in appearance from the surface-color to the illuminant-color mode. However it is unknown whether the visual system considers such color appearance mode of surrounding colors to achieve color constancy. We investigated the influence of surrounding colors that appeared illuminant on color constancy. The stimulus was composed of a central test stimulus and surrounding six colors: bright and dim red, green and blue. The observers adjusted the chromaticity of the test stimulus to be appeared as an achromatic surface. The luminance balance of three bright surrounding colors was equalized with that of the optimal colors in three illuminant conditions, then, the luminance of one of the three bright colors was varied in the range beyond the critical luminance of color appearance mode transition. The results showed that increasing luminance of a bright surrounding color shifted the observers' achromatic setting toward its chromaticity, but this effect diminished for the surrounding color in the illuminant-color mode. These results suggest that the visual system considers color appearance mode of surrounding colors to accomplish color constancy.

Effect of light irradiation on tooth whitening: enamel microhardness and color change.

Science.gov (United States)

Gomes, Mauricio Neves; Francci, Carlos; Medeiros, Igor Studart; De Godoy Froes Salgado, Nívea Regina; Riehl, Heraldo; Marasca, José Milton; Muench, Antônio

2009-01-01

The aim of this study was to evaluate the influence of light exposure associated with 35% hydrogen peroxide (Pola Office, SDI, Melbourne, Vic., Australia) or 15% hydrogen peroxide (BriteSmile, Discus, Culver City, CA, USA) on the microhardness and color changes of bovine enamel. Experimental groups were Britesmile + Light (BL) (15% hydrogen peroxide + plasm arc; 4 x 20 minutes), Britesmile + No Light (BN) (BL, no light), Pola office + Light (PL) (35% hydrogen peroxide + LED; 4 x 8 minutes), and Pola office + No light (PN) (PL, no light). Color changes (DeltaE) and the CIELAB (Commission Internationale de l' Eclairage, L* a* b* color system) parameters (L*, a*, and b*) were assessed with a spectrophotometer before (B), immediately (A), 1 day and 7 days after bleaching. The microhardness was measured before (B) and after (A), the obtained data were submitted to a two-way analysis of variance, and DeltaE were submitted to t-test for each period. Only Pola Office, in which the peroxide is associated with the light, improved DeltaE when evaluated immediately after bleaching (p enamel microhardness was not altered after bleaching for BriteSmile. However, enamel microhardness was reduced after bleaching for Pola Office, 283 MPa (+/-21) and 265 MPa (+/-27), respectively. It was concluded that these two bleaching systems were efficient regardless of the light systems used. However, the 35% hydrogen peroxide altered the enamel microhardness. CLINICAL SIGNIFICANCE Enamel microhardness was affected by a 35% hydrogen peroxide in-office bleaching therapy. Moreover, the in-office bleaching outcome was not improved by using the light associated with systems tested in this study. (J Esthet Restor Dent 21:387-396, 2009).

Tongue color changes within a menstrual cycle in eumenorrheic women

Directory of Open Access Journals (Sweden)

Shu-Feng Hsieh

2016-07-01

Full Text Available Tongue color (舌色 shé sè has been used to diagnose abnormal body conditions for thousands of years in traditional Chinese Medicine (中醫 zhōng yī. However, it is not clear whether tongue color alters with physiological changes within a normal menstrual cycle (月經周期 yuè jīng zhōu qī. This study investigated difference in tongue color between the follicular phase and luteal phase in eumenorrheic women. Tongue surface photographs were taken in the follicular phase and the luteal phase of thirty-two volunteers with biphasic basal body temperature. Color values on five areas of the tongue surface were examined and comparisons of color values were made between the two phases according to the red–green–blue (RGB, hue–saturation–brightness (HSB, luminance-a-b (Lab, and cyan–magenta–yellow–black (CMYK models. Based on the RGB model, the values of green and blue in the tip area were larger in the follicular phase than both in the luteal phase. The values of magenta and yellow based in the CMYK model were smaller in the tip area in the follicular phase than that in the luteal phase. The saturation in the tip area was smaller in the follicular phase than that in the luteal phase. Based on the Lab model, b value in the middle area was smaller in the follicular phase than that in the luteal phase. The data revealed that tongue color varied within a eumenorrheic menstrual cycle, suggesting that tongue color differences between the follicular and luteal phases need to be considered while practicing tongue diagnosis (舌診 shé zhěn or performing clinical studies among childbearing women.

Effect of one-step polishing system on the color stability of nanocomposites.

Science.gov (United States)

Alawjali, S S; Lui, J L

2013-08-01

This study was to compare the effect of three different one-step polishing systems on the color stability of three different types of nanocomposites after immersion in coffee for one day and seven days and determine which nanocomposite material has the best color stability following polishing with each of the one-step polishing system. The nanocomposites tested were Tetric EvoCeram, Grandio and Herculite Précis. A total of 120 discs (40/nanocomposite, 8mm×2mm) were fabricated. Ten specimens for each nanocomposite cured under Mylar strips served as the control. The other specimens were polished with OptraPol, OneGloss and Occlubrush immersed in coffee (Nescafé) up to seven days. Color measurements were made with a spectrophotometer at baseline and after one and seven days. Two way repeated measure ANOVA, two way ANOVA and Bonferroni tests were used for statistical analyses (P<0.05). The immersion time was a significant factor in the discoloration of the nanocomposites. The effect of three one-step polishing systems on the color stability was also significant. The color change values of the materials cured against Mylar strips were the greatest. The lowest mean color change values were from the Occlubrush polished groups. The effect of the three different types of nanocomposite on the color change was significant. The highest color change values were with Tetric EvoCeram groups. The lowest color change values were with Herculite Précis groups. The color change of nanocomposite resins is affected by the type of composite, polishing procedure and the period of immersion in the staining agent. Copyright © 2012 Elsevier Ltd. All rights reserved.

Availability of color calibration for consistent color display in medical images and optimization of reference brightness for clinical use

Science.gov (United States)

Iwai, Daiki; Suganami, Haruka; Hosoba, Minoru; Ohno, Kazuko; Emoto, Yutaka; Tabata, Yoshito; Matsui, Norihisa

2013-03-01

Color image consistency has not been accomplished yet except the Digital Imaging and Communication in Medicine (DICOM) Supplement 100 for implementing a color reproduction pipeline and device independent color spaces. Thus, most healthcare enterprises could not check monitor degradation routinely. To ensure color consistency in medical color imaging, monitor color calibration should be introduced. Using simple color calibration device . chromaticity of colors including typical color (Red, Green, Blue, Green and White) are measured as device independent profile connection space value called u'v' before and after calibration. In addition, clinical color images are displayed and visual differences are observed. In color calibration, monitor brightness level has to be set to quite lower value 80 cd/m2 according to sRGB standard. As Maximum brightness of most color monitors available currently for medical use have much higher brightness than 80 cd/m2, it is not seemed to be appropriate to use 80 cd/m2 level for calibration. Therefore, we propose that new brightness standard should be introduced while maintaining the color representation in clinical use. To evaluate effects of brightness to chromaticity experimentally, brightness level is changed in two monitors from 80 to 270cd/m2 and chromaticity value are compared with each brightness levels. As a result, there are no significant differences in chromaticity diagram when brightness levels are changed. In conclusion, chromaticity is close to theoretical value after color calibration. Moreover, chromaticity isn't moved when brightness is changed. The results indicate optimized reference brightness level for clinical use could be set at high brightness in current monitors .

Fast photo-induced color changes of Ag particles deposited on single-crystalline TiO2 surface

Science.gov (United States)

Bai, Y. J.; Liu, W. Z.; Chen, A.; Shi, L.; Liu, X. H.; Zi, J.

2018-05-01

It is well known that surface-plasmon enhanced photo-electrochemical effect or photo-thermal effect of metallic particles on a semiconductor substrate or in a suspension may result in color changes. Such character could be potentially applicable to colorimetric sensors, optical filters, and data storage devices. However, usually the response time for color changes is too long to be practically applied. In this letter, we found that the response rate of color changes could be controlled by the annealing condition of the semiconductor substrate, and changes larger than 10% in spectra were observed after only 1-min exposure to light. Furthermore, such fast response was applied to realize wavelength-dependent "write" and "read" applications with high spatial resolution.

Rapid visible color change and physical swelling during water exposure in triethanolamine-metalcone films formed by molecular layer deposition

International Nuclear Information System (INIS)

Lemaire, Paul C.; Oldham, Christopher J.; Parsons, Gregory N.

2016-01-01

Molecular layer deposition (MLD) of “metalcones,” including alucone, zincone, titanicone, and others, involves self-limiting half-reactions between organic and organometallic (or metal-halide) reactants. Studies have typically focused on metal precursors reacting with ethylene glycol or glycerol to form the films' polymeric O-M-O-(CH x ) y -O-M-O repeat units. The authors report new MLD materials that incorporate tertiary amine groups into the organic linkage. Specifically, reacting triethanolamine (TEA) with either trimethylaluminum or titanium tetrachloride produces TEA-alucone (Al-TEA) and TEA-titanicone (Ti-TEA), respectively, and the amine group leads to unique physical and optical properties. Fourier-transform infrared (FTIR) analysis confirms that the films have prominent C-H, C-N, and M-O-C peaks, consistent with the expected bond structure. When exposed to vapors, including water, alcohol, or ammonia, the Ti-TEA films changed their visible color within minutes and increased physical thickness by >35%. The Al-TEA showed significantly less response. X-ray photoelectron spectroscopy and FTIR suggest that HCl generated during MLD coordinates to the amine forming a quaternary ammonium salt that readily binds adsorbates via hydrogen bonding. The visible color change is reversible, and ellipsometry confirms that the color change results from vapor absorption. The unique absorptive and color-changing properties of the TEA-metalcone films point to new possible applications for MLD materials in filtration, chemical absorption, and multifunctional chemical separations/sensing device systems

Rapid visible color change and physical swelling during water exposure in triethanolamine-metalcone films formed by molecular layer deposition

Energy Technology Data Exchange (ETDEWEB)

Lemaire, Paul C.; Oldham, Christopher J.; Parsons, Gregory N., E-mail: gnp@ncsu.edu [Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States)

2016-01-15

Molecular layer deposition (MLD) of “metalcones,” including alucone, zincone, titanicone, and others, involves self-limiting half-reactions between organic and organometallic (or metal-halide) reactants. Studies have typically focused on metal precursors reacting with ethylene glycol or glycerol to form the films' polymeric O-M-O-(CH{sub x}){sub y}-O-M-O repeat units. The authors report new MLD materials that incorporate tertiary amine groups into the organic linkage. Specifically, reacting triethanolamine (TEA) with either trimethylaluminum or titanium tetrachloride produces TEA-alucone (Al-TEA) and TEA-titanicone (Ti-TEA), respectively, and the amine group leads to unique physical and optical properties. Fourier-transform infrared (FTIR) analysis confirms that the films have prominent C-H, C-N, and M-O-C peaks, consistent with the expected bond structure. When exposed to vapors, including water, alcohol, or ammonia, the Ti-TEA films changed their visible color within minutes and increased physical thickness by >35%. The Al-TEA showed significantly less response. X-ray photoelectron spectroscopy and FTIR suggest that HCl generated during MLD coordinates to the amine forming a quaternary ammonium salt that readily binds adsorbates via hydrogen bonding. The visible color change is reversible, and ellipsometry confirms that the color change results from vapor absorption. The unique absorptive and color-changing properties of the TEA-metalcone films point to new possible applications for MLD materials in filtration, chemical absorption, and multifunctional chemical separations/sensing device systems.

Effect of Color Light Stimulation Using LED on Sleep Induction Time

Directory of Open Access Journals (Sweden)

Seonjin Lee

2017-01-01

Full Text Available The effects of color are already being used widely. For this reason, in this study, an attempt was made to use such effects of color to examine the changes in sleep onset through the use of the preferred and nonpreferred color light stimulation. Color light stimulations were randomly presented to the subjects, and based on these colors, the changes in sleep onset were examined through the EEG. Also, to quantify the physiological changes that were caused by each color light stimulation, the changes in the HRV were examined through ECG to determine the level of activation of the autonomous nervous system. The results showed that sleep onset time was changed based on the light stimulation. The result of the EEG analysis showed that sleep onset time was most significantly shortened in preferred color light stimulation. Also, the result of HRV was the fastest change about both the time domain and the frequency domain in the preferred color light stimulation. Therefore, because the preferred color light stimulation activated the parasympathetic nervous system, sleep was induced quickly. Also, by simply using the HRV, the differences in the index of HRV showed changes of sleep onset according to the color light stimulation.

The color changes and tensile properties of oxidized Ti–6A1–2Mo–1.5Cr–2Zr–2Sn–2Nb alloy

International Nuclear Information System (INIS)

Jia, Zhiqiang; Zeng, Weidong; Zhang, Yaowu; Shi, Chunling; Quan, Biao; Wu, Jianding

2015-01-01

Highlights: • The oxidized alloy exhibited notable color changes. • The color was mainly attributed to the mixing of titanium oxides. • A corresponding relation between the color and tensile properties was established. • A predicted model was proposed to characterize the diffusion of oxygen. - Abstract: The oxidation of titanium alloy at elevated temperature severely limits its property and service life. It is a common and urgent issue to assess the mechanical property of oxidized titanium component without destroying its structural integrity. In this work, the color changes and tensile properties of oxidized Ti–6A1–2Mo–1.5Cr–2Zr–2Sn–2Nb alloy with initial basket-weave microstructure were investigated in the temperature range of 100–1000 °C. It was found that the oxidized specimens exhibited brilliant and regular color changes. X-ray diffraction (XRD) analysis indicated that the color changes were mainly attributed to the mixing of colored titanium oxides in the oxidation layer (such as yellow TiO, white TiO 2 and blue Ti 2 O 3 ). It was also found that mechanical properties were significant influenced by the oxidation treatment. The specimens oxidized below 600 °C exhibited excellent strength and plasticity due to its fine basket-weave microstructure and dense oxidation layer. In the temperature range from 600 to 800 °C, the strength slightly decreased while the plasticity rose a little. The change of mechanical properties during the temperature range was mainly determined by the microstructure change. Eventually, both strength and plasticity decreased sharply when the temperature was over 800 °C, which was mainly caused by the thick oxidation layer with porous and loose microstructure. The fracture mode of tensile specimens also changed from ductile fracture (below 800 °C) to transgranular cleavage fracture (over 800 °C). On the basis of experiments, a corresponding relation between the color changes and tensile properties was

Color categories and color appearance

Science.gov (United States)

Webster, Michael A.; Kay, Paul

2011-01-01

We examined categorical effects in color appearance in two tasks, which in part differed in the extent to which color naming was explicitly required for the response. In one, we measured the effects of color differences on perceptual grouping for hues that spanned the blue–green boundary, to test whether chromatic differences across the boundary were perceptually exaggerated. This task did not require overt judgments of the perceived colors, and the tendency to group showed only a weak and inconsistent categorical bias. In a second case, we analyzed results from two prior studies of hue scaling of chromatic stimuli (De Valois, De Valois, Switkes, & Mahon, 1997; Malkoc, Kay, & Webster, 2005), to test whether color appearance changed more rapidly around the blue–green boundary. In this task observers directly judge the perceived color of the stimuli and these judgments tended to show much stronger categorical effects. The differences between these tasks could arise either because different signals mediate color grouping and color appearance, or because linguistic categories might differentially intrude on the response to color and/or on the perception of color. Our results suggest that the interaction between language and color processing may be highly dependent on the specific task and cognitive demands and strategies of the observer, and also highlight pronounced individual differences in the tendency to exhibit categorical responses. PMID:22176751

A colorimetric method for highly sensitive and accurate detection of iodide by finding the critical color in a color change process using silver triangular nanoplates

Energy Technology Data Exchange (ETDEWEB)

Yang, Xiu-Hua; Ling, Jian, E-mail: lingjian@ynu.edu.cn; Peng, Jun; Cao, Qiu-E., E-mail: qecao@ynu.edu.cn; Ding, Zhong-Tao; Bian, Long-Chun

2013-10-10

Graphical abstract: -- Highlights: •Demonstrated a new colorimetric strategy for iodide detection by silver nanoplates. •The colorimetric strategy is to find the critical color in a color change process. •The colorimetric strategy is more accurate and sensitive than common colorimetry. •Discovered a new morphological transformation phenomenon of silver nanoplates. -- Abstract: In this contribution, we demonstrated a novel colorimetric method for highly sensitive and accurate detection of iodide using citrate-stabilized silver triangular nanoplates (silver TNPs). Very lower concentration of iodide can induce an appreciable color change of silver TNPs solution from blue to yellow by fusing of silver TNPs to nanoparticles, as confirmed by UV–vis absorption spectroscopy and transmission electron microscopy (TEM). The principle of this colorimetric assay is not an ordinary colorimetry, but a new colorimetric strategy by finding the critical color in a color change process. With this strategy, 0.1 μM of iodide can be recognized within 30 min by naked-eyes observation, and lower concentration of iodide down to 8.8 nM can be detected using a spectrophotometer. Furthermore, this high sensitive colorimetric assay has good accuracy, stability and reproducibility comparing with other ordinary colorimetry. We believe this new colorimetric method will open up a fresh insight of simple, rapid and reliable detection of iodide and can find its future application in the biochemical analysis or clinical diagnosis.

A colorimetric method for highly sensitive and accurate detection of iodide by finding the critical color in a color change process using silver triangular nanoplates

International Nuclear Information System (INIS)

Yang, Xiu-Hua; Ling, Jian; Peng, Jun; Cao, Qiu-E.; Ding, Zhong-Tao; Bian, Long-Chun

2013-01-01

Graphical abstract: -- Highlights: •Demonstrated a new colorimetric strategy for iodide detection by silver nanoplates. •The colorimetric strategy is to find the critical color in a color change process. •The colorimetric strategy is more accurate and sensitive than common colorimetry. •Discovered a new morphological transformation phenomenon of silver nanoplates. -- Abstract: In this contribution, we demonstrated a novel colorimetric method for highly sensitive and accurate detection of iodide using citrate-stabilized silver triangular nanoplates (silver TNPs). Very lower concentration of iodide can induce an appreciable color change of silver TNPs solution from blue to yellow by fusing of silver TNPs to nanoparticles, as confirmed by UV–vis absorption spectroscopy and transmission electron microscopy (TEM). The principle of this colorimetric assay is not an ordinary colorimetry, but a new colorimetric strategy by finding the critical color in a color change process. With this strategy, 0.1 μM of iodide can be recognized within 30 min by naked-eyes observation, and lower concentration of iodide down to 8.8 nM can be detected using a spectrophotometer. Furthermore, this high sensitive colorimetric assay has good accuracy, stability and reproducibility comparing with other ordinary colorimetry. We believe this new colorimetric method will open up a fresh insight of simple, rapid and reliable detection of iodide and can find its future application in the biochemical analysis or clinical diagnosis

Color change of tourmaline by heat treatment and electron beam irradiation: UV-Visible, EPR, and Mid-IR spectroscopic analyses

Science.gov (United States)

Maneewong, Apichate; Seong, Baek Seok; Shin, Eun Joo; Kim, Jeong Seog; Kajornrith, Varavuth

2016-01-01

The color of pink tourmaline gemstone changed to colorless when heating at temperature of 600 °C in air. This colorless tourmaline recovered its pink color when irradiated with an electron beam (e-beam) of 800 kGy. The origin of the color change was investigated in three types of tourmaline gemstones, two pink are from Afghanistan and one green are from Nigeria, by using Ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), Electron paramagnetic resonance (EPR), and Energy Dispersive X-ray Fluorescence (EDXRF). The UV-Vis absorption spectrum of the pink tourmaline with higher Mn concentration (T2, 0.24 wt%) showed characteristic absorption peaks originating from the Mn3+ color center: two absorption bands centered at wavelength of 396 and 520 nm, respectively. Both absorption bands disappeared when heated in air at 600 °C and then reappeared when irradiated with an e-beam at 800 kGy. EPR T2 spectra showed that the color change was related to the valence change of Mn3+ to Mn2+ and vice versa. The pink tourmaline of lower MnO content (T1, 0.08 wt%) also became colorless when heated, but the color was not recovered when the gemstone underwent e-beam irradiation. Instead, a yellow color was obtained. UV-Vis and FTIR spectra indicated that this yellow color originated from a decomposition of the hydroxyl group (-OH) into O- and Ho by the e-beam irradiation. Green tourmaline did not show any color change with either heat treatment or e-beam irradiation.

Automatic color preference correction for color reproduction

Science.gov (United States)

Tsukada, Masato; Funayama, Chisato; Tajima, Johji

2000-12-01

The reproduction of natural objects in color images has attracted a great deal of attention. Reproduction more pleasing colors of natural objects is one of the methods available to improve image quality. We developed an automatic color correction method to maintain preferred color reproduction for three significant categories: facial skin color, green grass and blue sky. In this method, a representative color in an object area to be corrected is automatically extracted from an input image, and a set of color correction parameters is selected depending on the representative color. The improvement in image quality for reproductions of natural image was more than 93 percent in subjective experiments. These results show the usefulness of our automatic color correction method for the reproduction of preferred colors.

Evaluation of color stability of different temporary restorative materials

Directory of Open Access Journals (Sweden)

José Vitor Quinelli Mazaro

Full Text Available AbstractIntroductionTemporary restorative materials are widely used, however, little is know about their color stability.Objectiveto evaluate the color stability of the following temporary restorative materials: acrylic and bis-acrylic resins after immersion in pigmenting solutions for different periods of storage.Material and methodFour materials were tested (Dêncor/Clássico, Protemp 4/3M ESPE; Structur 2 SC/Voco; Luxatemp AM Plus/DMG and 30 test specimens (15 mm in diameter and 2 mm thick per material were fabricated. They were divided according to the storage medium (artificial saliva, saliva + cola type soda, and saliva + coffee and storage time intervals (2, 5, 7 and 15 days. Color measurements were made before and after immersions, with use of a spectrophotometer, by means of the CIE L*a*b* system. The data were analyzed by the analysis of variance and the Tukey Test, at a level of significance of 5%.ResultAcrylic resin presented greater color stability in comparison with bis-acrylic resins (p<0.001. When bis-acrylic resins were compared no significant difference was observed between the resins Structur and Luxatemp (p=0.767. As regards solutions tested, coffee showed the highest color change values (p<0.001, and the longer the storage time interval, the greater was the color change in all the temporary restorative materials analyzed (p<0.001.ConclusionAcrylic resin presented greater color stability in comparison with bis-acrylic resins (p<0.001. Coffee caused the greatest color change, and immersion time was determinant in color stability of the temporary materials analyzed.

Biomolecule-to-fluorescent-color encoder: modulation of fluorescence emission via DNA structural changes

Science.gov (United States)

Nishimura, Takahiro; Ogura, Yusuke; Yamada, Kenji; Ohno, Yuko; Tanida, Jun

2014-01-01

A biomolecule-to-fluorescent-color (B/F) encoder for optical readout of biomolecular information is proposed. In the B/F encoder, a set of fluorescence wavelengths and their intensity levels are used for coding of a biomolecular signal. A hybridization chain reaction of hairpin DNAs labeled with fluorescent reporters was performed to generate the fluorescence color codes. The fluorescence is modulated via fluorescence resonance energy transfer, which is controlled by DNA structural changes. The results demonstrate that fluorescent color codes can be configured based on two wavelengths and five intensities using the B/F encoder, and the assigned codes can be retrieved via fluorescence measurements. PMID:25071950

[Study of spectrum drifting of primary colors and its impact on color rendering properties].

Science.gov (United States)

Cui, Xiao-yan; Zhang, Xiao-dong

2012-08-01

LEDs are currently used widely to display text, graphics and images in large screens. With red, green and blue LEDs as three primary colors, color rendition will be realized through color mixing. However, LEDs' spectrum will produce drifts with the changes in the temperature environment. With the changes in the driving current simulating changes in the temperature, the three primary color LEDs' spectral drifts were tested, and the drift characteristics of the three primary colors were obtained respectively. Based on the typical characteristics of the LEDs and the differences between LEDs with different colors in composition and molecular structure, the paper analyzed the reason for the spectrum drifts and the drift characteristics of different color LEDs, and proposed the equations of spectrum drifts. Putting the experimental data into the spectrum drift equations, the paper analyzed the impacts of primary colors on the mixed color, pointed out a way to reduce the chromatic aberration, and provided the theory for engineering application of color LEDs.

Rotary Motion Impairs Attention to Color Change in 4-Month-Old Infants

Science.gov (United States)

Kavsek, Michael

2013-01-01

Continuous color changes of an array of elements appear to stop changing if the array undergoes a coherent motion. This "silencing" illusion was demonstrated for adults by Suchow and Alvarez ("Current Biology", 2011, vol. 21, pp. 140-143). The current forced-choice preferential looking study examined 4-month-old infants' sensitivity to the…

Carbon Dioxide Absorption in a Membrane Contactor with Color Change

Science.gov (United States)

Pantaleao, Ines; Portugal, Ana F.; Mendes, Adelio; Gabriel, Joaquim

2010-01-01

A pedagogical experiment is described to examine the physical absorption of gases, in this case carbon dioxide, in a hollow fiber membrane contactor (HFMC) where the absorption concentration profile can be followed by a color change. The HFMC is used to teach important concepts and can be used in interesting applications for students, such as…

The color changes and tensile properties of oxidized Ti–6A1–2Mo–1.5Cr–2Zr–2Sn–2Nb alloy

Energy Technology Data Exchange (ETDEWEB)

Jia, Zhiqiang, E-mail: jzq19841102@gmail.com [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China); Zeng, Weidong, E-mail: zengwd@nwpu.edu.cn [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China); Zhang, Yaowu [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China); Shi, Chunling [Xi’an Aircraft Industry Company LTD, 710089 (China); Quan, Biao; Wu, Jianding [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China)

2015-08-15

Highlights: • The oxidized alloy exhibited notable color changes. • The color was mainly attributed to the mixing of titanium oxides. • A corresponding relation between the color and tensile properties was established. • A predicted model was proposed to characterize the diffusion of oxygen. - Abstract: The oxidation of titanium alloy at elevated temperature severely limits its property and service life. It is a common and urgent issue to assess the mechanical property of oxidized titanium component without destroying its structural integrity. In this work, the color changes and tensile properties of oxidized Ti–6A1–2Mo–1.5Cr–2Zr–2Sn–2Nb alloy with initial basket-weave microstructure were investigated in the temperature range of 100–1000 °C. It was found that the oxidized specimens exhibited brilliant and regular color changes. X-ray diffraction (XRD) analysis indicated that the color changes were mainly attributed to the mixing of colored titanium oxides in the oxidation layer (such as yellow TiO, white TiO{sub 2} and blue Ti{sub 2}O{sub 3}). It was also found that mechanical properties were significant influenced by the oxidation treatment. The specimens oxidized below 600 °C exhibited excellent strength and plasticity due to its fine basket-weave microstructure and dense oxidation layer. In the temperature range from 600 to 800 °C, the strength slightly decreased while the plasticity rose a little. The change of mechanical properties during the temperature range was mainly determined by the microstructure change. Eventually, both strength and plasticity decreased sharply when the temperature was over 800 °C, which was mainly caused by the thick oxidation layer with porous and loose microstructure. The fracture mode of tensile specimens also changed from ductile fracture (below 800 °C) to transgranular cleavage fracture (over 800 °C). On the basis of experiments, a corresponding relation between the color changes and tensile properties

Investigation of functional properties and color changes of corn extrudates enriched with broccoli or olive paste.

Science.gov (United States)

Bisharat, Ghassan I; Katsavou, Ioanna D; Panagiotou, Nikolaos M; Krokida, Magdalini K; Maroulis, Zacharias B

2015-12-01

Following the tendency of replacing common food snacks with healthier food products, extruded snacks with corn flour and broccoli (4-10%) or olive paste (4-8%) were investigated in this study. The effect of material characteristics, including feed moisture content (14-19%), and broccoli or olive paste concentration, and extrusion conditions, including screw speed (150-250 r/min), and extrusion temperature (140-180 ℃), on the functional properties (water absorption index, water solubility index, and oil absorption index), as well as color change (ΔE) of the extruded snacks was studied. Regression analysis showed that screw speed did not significantly influence (p > 0.05) the properties. After mathematical modelling it was found that broccoli and olive paste concentration, as well as temperature increment, caused a decrease in water absorption index (minimum of 5.6 and 6.4 g/g sample, respectively) and an increase in water solubility index (maximum of 18.7 and 10.9 g/100 g sample, respectively), while feed moisture presented opposite tendency. Higher extrusion temperature led to an increment of oil absorption index (approximately to 1.2 and 1 mL/g sample) and decrement of color changes. Finally, feed moisture and broccoli concentration lowered oil absorption index and color of corn/broccoli extrudates, while olive paste concentration caused their increment. © The Author(s) 2014.

Finding text in color images

Science.gov (United States)

Zhou, Jiangying; Lopresti, Daniel P.; Tasdizen, Tolga

1998-04-01

In this paper, we consider the problem of locating and extracting text from WWW images. A previous algorithm based on color clustering and connected components analysis works well as long as the color of each character is relatively uniform and the typography is fairly simple. It breaks down quickly, however, when these assumptions are violated. In this paper, we describe more robust techniques for dealing with this challenging problem. We present an improved color clustering algorithm that measures similarity based on both RGB and spatial proximity. Layout analysis is also incorporated to handle more complex typography. THese changes significantly enhance the performance of our text detection procedure.

The color changes on varnish layers after accelerated aging through ...

African Journals Online (AJOL)

The endurance of the protective coating (such as paint and varnish) to external effects is limited and the lifetime of the coating is determined by the type and the severity of the effects to which it is exposed. The effect of a color change on varnish layers can determine the usefulness of the varnish. It is conjectured that ...

Perceived color shift of ceramics according to the change of illuminating light with spectroradiometer

Science.gov (United States)

Cha, Hyun-Suk; Yu, Bin

2013-01-01

PURPOSE Perceived color of ceramics changes by the spectral power distribution of ambient light. This study aimed to quantify the amount of shifts in color and color coordinates of clinically simulated seven all-ceramics due to the switch of three ambient light sources using a human vision simulating spectroradiometer. MATERIALS AND METHODS CIE color coordinates, such as L*, a* and b*,of ceramic specimens were measured under three light sources, which simulate the CIE standard illuminant D65 (daylight), A (incandescent lamp), and F9 (fluorescent lamp). Shifts in color and color coordinate by the switch of lights were determined. Influence of the switched light (D65 to A, or D65 to F9), shade of veneer ceramics (A2 or A3), and brand of ceramics on the shifts was analyzed by a three-way ANOVA. RESULTS Shifts in color and color coordinates were influenced by three factors (P 5.5). When switched to A, CIE a* increased (Δa*: 5.6 to 7.6), however, CIE b* increased (Δb*: 4.9 to 7.8) when switched to F9. CONCLUSION Clinically simulated ceramics demonstrated clinically unacceptable color shifts according to the switches in ambient lights based on spectroradiometric readings. Therefore, shade matching and compatibility evaluation should be performed considering ambient lighting conditions and should be done under most relevant lighting condition. PMID:24049567

Examination of Color-Lighting Control System Using Colored Paper User Interface

OpenAIRE

Aida Hiroto; Matsui Kento; Keisuke Soma; Murakami Hiroki; Miki Mistunori

2016-01-01

In recent year, Full-Color LED Lighting that can be changed to various color such as red, green, blue has been appeared with development of LED Lighting. By Color-Lighting control, users affected such as concentrating and relaxing. Therefore, Color-lighting control will spread to various place such as home, offices, stations. However color-lighting control affected some disturbance such as daylight, display when Full-Color LED controlled indoors. Also, information devices control get difficul...

Ornaments in radiation treatment of cultural heritage: Color and UV–vis spectral changes in irradiated nacres

International Nuclear Information System (INIS)

Marušić, Katarina; Pucić, Irina; Desnica, Vladan

2016-01-01

Cultural heritage objects that are radiation treated in order to stop their biodegradation often contain ornamenting materials that cannot be removed. Radiation may produce unwanted changes to such materials. Nacre is a common ornamenting material so this is an attempt to assess the impact of gamma-radiation on its optical properties. Two types of nacre (yellow and white) were obtained from a museum and subjected to different absorbed doses of Co-60 gamma irradiation under the same conditions. The radiation induced changes of nacres color were investigated with fiber optic reflectance spectroscopy (FORS). Colorimetry in CIE Lab space revealed that in both nacres the lightness shifted to darker grey hues at high doses while the color component's (red, green, yellow and blue) behavior depended on the nacre type. Observable changes occurred at doses much above the dose range needed for radiation treatment of cultural heritage objects that are often ornamented with nacre. In UV–vis reflectance spectra of samples irradiated to high doses carbonate radical anion absorption appeared. - Highlights: • Radiation induced changes of nacres color were investigated with FORS. • Nacres darken at high doses while the color component depends on the nacre type. • Observable changes occurred at larger doses than needed for cultural heritage. • For samples irradiated to high doses carbonate radical anion absorption appeared.

Colored tracks of heavy ion particles recorded on photographic color film

International Nuclear Information System (INIS)

Kuge, K.; Yasuda, N.; Kumagai, H.; Aoki, N.; Hasegawa, A.

2002-01-01

A new method to obtain the three-dimensional information on nuclear tracks was developed using color photography. Commercial color films were irradiated with ion beam and color-developed. The ion tracks were represented with color images in which different depths were indicated by different colors, and the three-dimensional information was obtained from color changes. Details of this method are reported, and advantages and limitations are discussed in comparison with a conventional method using a nuclear emulsion

Seasonal Variations in Color Preference.

Science.gov (United States)

Schloss, Karen B; Nelson, Rolf; Parker, Laura; Heck, Isobel A; Palmer, Stephen E

2017-08-01

We investigated how color preferences vary according to season and whether those changes could be explained by the ecological valence theory (EVT). To do so, we assessed the same participants' preferences for the same colors during fall, winter, spring, and summer in the northeastern United States, where there are large seasonal changes in environmental colors. Seasonal differences were most pronounced between fall and the other three seasons. Participants liked fall-associated dark-warm colors-for example, dark-red, dark-orange (brown), dark-yellow (olive), and dark-chartreuse-more during fall than other seasons. The EVT could explain these changes with a modified version of Palmer and Schloss' (2010) weighted affective valence estimate (WAVE) procedure that added an activation term to the WAVE equation. The results indicate that color preferences change according to season, as color-associated objects become more/less activated in the observer. These seasonal changes in color preferences could not be characterized by overall shifts in weights along cone-contrast axes. Copyright © 2016 Cognitive Science Society, Inc.

Lipid oxidation and color changes of goose meat stored under vacuum and modified atmosphere conditions.

Science.gov (United States)

Orkusz, A; Haraf, G; Okruszek, A; Werenska-Sudnik, M

2017-03-01

The objective of the work was to investigate the color and lipid oxidation changes of goose breast meat packaged in vacuum and modified atmosphere (MA) conditions consisting of 80% O2, 20% CO2, and stored in refrigerated conditions at 4°C. Color stability was monitored by determining total heme pigments concentration; relative concentration of myoglobin, oxymyoglobin, and metmyoglobin; parameters of color L*, a*, b*, and sensory evaluation of the surface color. Lipid stability was measured by determining thiobarbituric acid reactive substances (TBARS). The samples were examined in 24 h after slaughter (unpacked muscles) and on d 4, 7, 9, 11 of storage (muscles packed in vacuum and in MA). Through the time of storage, samples packed in MA had higher TBARS values in comparison to the meat packed in vacuum. For samples packed in two types of atmospheres, the total pigments concentration decreased gradually within 11 d of storage. It was observed that relative metmyoglobin concentration increased whereas relative oxymyoglobin concentration decreased in total heme pigments in the MA stored muscle. The relative concentration of all three myoglobin forms sample packed in vacuum remained unchanged. The color parameters (L*, a*, b*) did not change for 11 d of storage for the vacuum packed meat. The value of the color parameter a* decreased and the value of the color parameters L* and b* increased in the samples packaged in MA. The data prove that if you store goose meat in MA (consisting of 80% O2, 20% CO2) or vacuum, the unchanged surface color is preserved for 9 and 11 day, respectively.Vacuum appears to be a better method as regards the maintaining of lipid stability in goose meat. © 2016 Poultry Science Association Inc.

Pseudo color ghost coding imaging with pseudo thermal light

Science.gov (United States)

Duan, De-yang; Xia, Yun-jie

2018-04-01

We present a new pseudo color imaging scheme named pseudo color ghost coding imaging based on ghost imaging but with multiwavelength source modulated by a spatial light modulator. Compared with conventional pseudo color imaging where there is no nondegenerate wavelength spatial correlations resulting in extra monochromatic images, the degenerate wavelength and nondegenerate wavelength spatial correlations between the idle beam and signal beam can be obtained simultaneously. This scheme can obtain more colorful image with higher quality than that in conventional pseudo color coding techniques. More importantly, a significant advantage of the scheme compared to the conventional pseudo color coding imaging techniques is the image with different colors can be obtained without changing the light source and spatial filter.

Shifts in color discrimination during early pregnancy.

Science.gov (United States)

Orbán, Levente L; Dastur, Farhad N

2012-05-25

The present study explores two hypotheses: a) women during early pregnancy should experience increased color discrimination ability, and b) women during early pregnancy should experience shifts in subjective preference away from images of foods that appear either unripe or spoiled. Both of these hypotheses derive from an adaptive view of pregnancy sickness that proposes the function of pregnancy sickness is to decrease the likelihood of ingestion of foods with toxins or teratogens. Changes to color discrimination could be part of a network of perceptual and physiological defenses (e.g., changes to olfaction, nausea, vomiting) that support such a function. Participants included 13 pregnant women and 18 non-pregnant women. Pregnant women scored significantly higher than non-pregnant controls on the Farnsworth-Munsell (FM) 100 Hue Test, an objective test of color discrimination, although no difference was found between groups in preferences for food images at different stages of ripeness or spoilage. These results are the first indication that changes to color discrimination may occur during early pregnancy, and is consistent with the view that pregnancy sickness may function as an adaptive defense mechanism.

Properties of a color-changeable chewing gum used to evaluate masticatory performance.

Science.gov (United States)

Hama, Yohei; Kanazawa, Manabu; Minakuchi, Shunsuke; Uchida, Tatsuro; Sasaki, Yoshiyuki

2014-04-01

To clarify the basic properties of a color-changeable chewing gum to determine its applicability to evaluations of masticatory performance under different types of dental status. Ten participants with natural dentition aged 26-30 years chewed gum that changes color during several chewing strokes over five repetitions. Changes in color were assessed using a colorimeter, and then L*, a*, and b* values in the CIELAB color system were quantified. Relationships between chewing progression and color changes were assessed using regression analysis and the reliability of color changes was assessed using intraclass correlation coefficients. We then measured 42 dentate participants (age, 22-31 years) and 47 complete denture wearers (age, 44-90 years) to determine the detectability of masticatory performance under two types of dental status. Regression between the number of chewing strokes and the difference between two colors was non-linear. The intraclass correlation coefficients were highest between 60 and 160 chewing strokes. Dentate and edentulous groups significantly differed (Wilcoxon rank sum test) and values were widely distributed within each group. The color of the chewing gum changed over a wide range, which was sufficient to evaluate the masticatory performance of individuals with natural dentition and those with complete dentures. Changes in the color values of the gum reliably reflected masticatory performance. These findings indicate that the color-changeable chewing gum will be useful for evaluating masticatory performance under any dental status. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

3D Surface Profile and Color Stability of Tooth Colored Filling Materials after Bleaching

Directory of Open Access Journals (Sweden)

Bryant Anthony Irawan

2015-01-01

Full Text Available This study aims to evaluate the effects of vital tooth bleaching with carbamide peroxide home bleaching and in-office bleaching on the color stability and 3D surface profile of dental restorative filling materials. Thirty discs (n=30 measure 6 mm in diameter and 2 mm thick for each of three restorative materials. These are nanofilled composite Filtek Z350 XT, the submicron composite Estelite Σ Quick, and nanofilled glass ionomer Ketac N100 nanoionomer and were fabricated in shade A2. Each group was further divided into three subgroups (n=10: subgroup A (Opalescence PF, subgroup B (Opalescence Boost in-office bleaching, and subgroup C (distilled water serving as control. Samples were bleached according to the manufacturer’s instructions for a period of two weeks. The Commission Internationale de L’Eclairage (CIE L*, a*, b* system was chosen for image processing, while 3D surface profile was tested with atomic force microscopy (AFM. Statistical analyses were performed with the Mann-Whitney tests and Krusal-Wallis with a P value of ≤0.05. The three restorative materials showed significant color changes (ΔE; P≤0.05. In diminishing order, the mean color changes recorded were Estelite Σ (3.82 ± 1.6 > Ketac Nano (2.97 ± 1.2 > Filtek Z350 XT (2.25 ± 1.0. However, none of the tested materials showed statistically significant changes in surface roughness; P>0.05.

Examination of Color-Lighting Control System Using Colored Paper User Interface

Directory of Open Access Journals (Sweden)

Aida Hiroto

2016-01-01

Full Text Available In recent year, Full-Color LED Lighting that can be changed to various color such as red, green, blue has been appeared with development of LED Lighting. By Color-Lighting control, users affected such as concentrating and relaxing. Therefore, Color-lighting control will spread to various place such as home, offices, stations. However color-lighting control affected some disturbance such as daylight, display when Full-Color LED controlled indoors. Also, information devices control get difficult with information technology develop. I propose Color-Lighting Control System using Colored Paper User Interface(CLC/CPUI. The purpose of CLC/CPUI is that anyone can intuitively control Full-Color LED Lighting. CLC/CPUI uses colored paper as user interface by sensing the paper. CLC/CPUI realizes lighting color that user demanded to do feedback control. I conduct accuracy verification experiment of CLC/CPUI.

In vitro color stability of provisional restorative materials

Directory of Open Access Journals (Sweden)

Hamid Jalali

2012-01-01

Aims: The purpose of this study was to investigate the effect of tea on provisional restorative materials. Setting and Design: This study was designed to measure the degree of color change of three acrylic resin provisional materials, before and after immersion in artificial saliva and artificial saliva-tea solution for 2 and 4 weeks. Materials and Methods : Three types of acrylic provisional materials (duralay, tempron, acropars TRP, were studied. Twenty disks (20±0.1 mm by 2±0.05 mm were fabricated from each material. Specimens were polished with acrylic bur using pumice and diamond polishing paste. Base line color was measured using a spectrophotometer. Ten disks were stored in artificial saliva and 10 were stored in a solution of artificial saliva and tea at room temperature. Color measurements were made after 2 and 4 weeks of immersion. Statistical analysis used: Differences in color changes were compared by two way ANOVA, across the six groups, followed by a Turkey-Kramer′s multiple comparison test. Results: For specimens immersed in artificial saliva, the color change of methyl methacrylate materials; duralay (ΔE=4.94 and tempron (ΔE=6.54, was significantly more than butyl methacrylate material; acropars (ΔE=4.10. After immersion in an artificial saliva- tea solution, tempron exhibited less color change (ΔE=8.50 compared to duralay (ΔE=10.93 and acropars (ΔE=15.64. Conclusion: Color stability of methyl methacrylate is higher than butyl methacrylates so if provisional materials are used for extended periods of time; tempron is preferred.

Does Fine Color Discrimination Learning in Free-Flying Honeybees Change Mushroom-Body Calyx Neuroarchitecture?

Science.gov (United States)

Sommerlandt, Frank M J; Spaethe, Johannes; Rössler, Wolfgang; Dyer, Adrian G

2016-01-01

Honeybees learn color information of rewarding flowers and recall these memories in future decisions. For fine color discrimination, bees require differential conditioning with a concurrent presentation of target and distractor stimuli to form a long-term memory. Here we investigated whether the long-term storage of color information shapes the neural network of microglomeruli in the mushroom body calyces and if this depends on the type of conditioning. Free-flying honeybees were individually trained to a pair of perceptually similar colors in either absolute conditioning towards one of the colors or in differential conditioning with both colors. Subsequently, bees of either conditioning groups were tested in non-rewarded discrimination tests with the two colors. Only bees trained with differential conditioning preferred the previously learned color, whereas bees of the absolute conditioning group, and a stimuli-naïve group, chose randomly among color stimuli. All bees were then kept individually for three days in the dark to allow for complete long-term memory formation. Whole-mount immunostaining was subsequently used to quantify variation of microglomeruli number and density in the mushroom-body lip and collar. We found no significant differences among groups in neuropil volumes and total microglomeruli numbers, but learning performance was negatively correlated with microglomeruli density in the absolute conditioning group. Based on these findings we aim to promote future research approaches combining behaviorally relevant color learning tests in honeybees under free-flight conditions with neuroimaging analysis; we also discuss possible limitations of this approach.

Use of color-change indicators to quantify passive films on the stainless steel valves of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Cheng, Cong Qian [School of Materials Science, Engineering, Dalian University of Technology, Dalian 116085 (China); Yang, Shu Kai [School of Materials Science, Engineering, Dalian University of Technology, Dalian 116085 (China); Suzhou Nuclear Power Research Institute, Suzhou 215004 (China); Zhao, Jie, E-mail: jiezhao@dlut.edu.cn [School of Materials Science, Engineering, Dalian University of Technology, Dalian 116085 (China)

2016-02-15

Highlights: • A facile method to evaluate passivation quality by color change indicator. • Two indicators were compared in lab and applied on vales in nuclear power plants. • It shows that the higher value of color change the worse quality of passivation. • Traditional ferroxyl solution is unstable and might impair the vale surface. • The new indicator is more practicable than the ferroxyl test for on-site inspection. - Abstract: The passive film on nuclear-grade stainless steels was evaluated by quantifying its color changes. Coloration reactions were compared by using ferroin and blue dot solutions as indicators on the basis of the measured results in a laboratory. The reactions were then applied on stainless steel valves in a nuclear power plant. The degree of color change indicates the degree of growth of a passive film. The ferroin solution exhibits higher accuracy and more stable than blue dot solution in determining passive film quality. The potentiodynamic polarization curves show that blue dot solution might cause surface damage compared with ferroin solution. The inspection result on stainless steel valves supports our laboratory result. However, stainless steel exhibited a dramatic decrease in sensitivity to blue dot because of the intrinsic instability and high acidity of this solution. Ferroin solution is superior to blue dot solution for stainless steel facilities in a nuclear power plant.

Human preferences for colorful birds: Vivid colors or pattern?

Science.gov (United States)

Lišková, Silvie; Landová, Eva; Frynta, Daniel

2015-04-29

In a previous study, we found that the shape of a bird, rather than its color, plays a major role in the determination of human preferences. Thus, in the present study, we asked whether the preferences of human respondents towards uniformly shaped, colorful birds are determined by pattern rather than color. The experimental stimuli were pictures of small passerine birds of the family Pittidae possessing uniform shape but vivid coloration. We asked 200 participants to rank 43 colored and 43 identical, but grayscaled, pictures of birds. To find the traits determining human preferences, we performed GLM analysis in which we tried to explain the mean preference ranks and PC axes by the following explanatory variables: the overall lightness and saturation, edges (pattern), and the portion of each of the basic color hues. The results showed that the mean preference ranks of the grayscale set is explained mostly by the birds' pattern, whereas the colored set ranking is mostly determined by the overall lightness. The effect of colors was weaker, but still significant, and revealed that people liked blue and green birds. We found no significant role of the color red, the perception of which was acquired relatively recently in evolution.

Human Preferences for Colorful Birds: Vivid Colors or Pattern?

Directory of Open Access Journals (Sweden)

Silvie Lišková

2015-04-01

Full Text Available In a previous study, we found that the shape of a bird, rather than its color, plays a major role in the determination of human preferences. Thus, in the present study, we asked whether the preferences of human respondents towards uniformly shaped, colorful birds are determined by pattern rather than color. The experimental stimuli were pictures of small passerine birds of the family Pittidae possessing uniform shape but vivid coloration. We asked 200 participants to rank 43 colored and 43 identical, but grayscaled, pictures of birds. To find the traits determining human preferences, we performed GLM analysis in which we tried to explain the mean preference ranks and PC axes by the following explanatory variables: the overall lightness and saturation, edges (pattern, and the portion of each of the basic color hues. The results showed that the mean preference ranks of the grayscale set is explained mostly by the birds' pattern, whereas the colored set ranking is mostly determined by the overall lightness. The effect of colors was weaker, but still significant, and revealed that people liked blue and green birds. We found no significant role of the color red, the perception of which was acquired relatively recently in evolution.

Lipid and cholesterol oxidation, color changes, and volatile compounds production in irradiated raw pork batters with different fat content

International Nuclear Information System (INIS)

Jo, Cheo Run; Byun, Myung Woo

2000-01-01

An emulsion-type product was prepared to determine the effect of irradiation on lipid and cholesterol oxidation, color change, and volatile production in raw pork with different fat content. Lipid oxidation increased with an increase in fat content or irradiation dose. Irradiated batters had higher cholesterol oxides than did non-irradiated batters, and the major cholesterol oxides formed in irradiated pork batters were 7α- and 7β- hydroxycholesterol. Hunter color a- and b-values of raw pork batters were decreased by irradiation regardless of fat content. Irradiation significantly increased the amount of volatile compounds. Although lipid oxidation of high fat products (10 and 15% fat) was higher than that of low fat products (4%), high fat products did not always produce greater amount of volatile compounds in raw pork batters. In summary, irradiation increased lipid and cholesterol oxidation, and volatile compounds production, and had detrimental effects on the color of raw pork batter under aerobic conditions

Color management of porcelain veneers: influence of dentin and resin cement colors.

Science.gov (United States)

Dozic, Alma; Tsagkari, Maria; Khashayar, Ghazal; Aboushelib, Moustafa

2010-01-01

Porcelain veneers have become an interesting treatment option to correct the shape and color of anterior teeth. Because of their limited thickness and high translucency, achieving a good color match is influenced by several variables. The aim of this work was to investigate the influence of natural dentin and resin cement colors on final color match of porcelain veneers. A preselected shade tab (A1) was chosen as the target color for a maxillary central incisor, and its color parameters (L*a*b*) were measured using a digital spectrophotometer (SpectroShade, MHT). Nine natural dentin colors (Natural Die Material, Ivoclar Vivadent) representing a wide range of tooth colors were used to prepare resin replicas of the maxillary central incisor with a standard preparation for porcelain veneers. The prepared porcelain veneers (IPS Empress Esthetic, A1, 0.6 mm thick, Ivoclar Vivadent) were cemented on the resin dies (nine groups of natural dentin colors) using seven shades of resin cement (Variolink Veneers, Ivoclar Vivadent). The L*a*b* values of the cemented veneers were measured, and DE values were calculated against the preselected target color (A1). DE greater than 3.3 was considered as a significant color mismatch detectable by the human eye. The seven shades of resin cement had no significant influence on the final color of the veneers, as the measured DE values were almost identical for every test group. On the other hand, the color of natural dentin was a significant factor that influenced final color match. None of the 63 tested combinations (nine natural dentin colors and seven resin cement colors) produced an acceptable color match. Thin porcelain veneers cannot mask underlying tooth color even when different shades of resin cement are used. Incorporation of opaque porcelain (high chroma) may improve final color match.

Shifts in Color Discrimination during Early Pregnancy

Directory of Open Access Journals (Sweden)

Levente L. Orbán

2012-04-01

Full Text Available The present study explores two hypotheses: a women during early pregnancy should experience increased color discrimination ability, and b women during early pregnancy should experience shifts in subjective preference away from images of foods that appear either unripe or spoiled. Both of these hypotheses derive from an adaptive view of pregnancy sickness that proposes the function of pregnancy sickness is to decrease the likelihood of ingestion of foods with toxins or teratogens. Changes to color discrimination could be part of a network of perceptual and physiological defenses (e.g., changes to olfaction, nausea, vomiting that support such a function. Participants included 13 pregnant women and 18 non-pregnant women. Pregnant women scored significantly higher than non-pregnant controls on the Farnsworth-Munsell (FM 100 Hue Test, an objective test of color discrimination, although no difference was found between groups in preferences for food images at different stages of ripeness or spoilage. These results are the first indication that changes to color discrimination may occur during early pregnancy, and is consistent with the view that pregnancy sickness may function as an adaptive defense mechanism.

Color stability of esthetic restorative materials: a spectrophotometric analysis.

Science.gov (United States)

Poggio, Claudio; Ceci, Matteo; Beltrami, Riccardo; Mirando, Maria; Wassim, Jaffal; Colombo, Marco

2016-12-01

Objective: The aim of this in vitro study was to evaluate the color stability of different restorative materials (one microfilled composite, one nanofilled composite, one nanohybrid composite and one Ormocer-based composite) after exposure to different staining solutions (coffee, coca-cola and red wine). Material and methods: All materials were polymerized into silicon rings (2 mm ×6 mm ×8 mm) to obtain specimens identical in size. Thirty cylindrical specimens of each material were prepared. They were immersed in staining solutions over a 28-day test period. A colorimetric evaluation according to the CIE L*a*b* system was performed by a blind trained operator at 7, 14, 21, 28 days of the staining process. The Shapiro-Wilk test and Kruskal-Wallis ANOVA were applied to assess significant differences among restorative materials. The paired t -test was applied to test which CIE L*a*b* parameters significantly changed after immersion in staining solutions. Results: All restorative materials showed clinically perceptible color differences after immersion in coffee. L* and b* values showed the highest variability. Coca cola and red wine did not influence the color stability for all restorative materials except for Filtek Supreme XTE. Conclusions: Coffee caused a significant color change in all types of tested composite resins. Filtek Supreme XTE demonstrated alone a staining susceptibility to red wine; no other significant differences among the materials were demonstrated. Long-term exposure to some food dyes (coffee in particular) can significantly affect the color stability of modern esthetic restorative materials regardless of materials' different composition.

Does Fine Color Discrimination Learning in Free-Flying Honeybees Change Mushroom-Body Calyx Neuroarchitecture?

Directory of Open Access Journals (Sweden)

Frank M J Sommerlandt

Full Text Available Honeybees learn color information of rewarding flowers and recall these memories in future decisions. For fine color discrimination, bees require differential conditioning with a concurrent presentation of target and distractor stimuli to form a long-term memory. Here we investigated whether the long-term storage of color information shapes the neural network of microglomeruli in the mushroom body calyces and if this depends on the type of conditioning. Free-flying honeybees were individually trained to a pair of perceptually similar colors in either absolute conditioning towards one of the colors or in differential conditioning with both colors. Subsequently, bees of either conditioning groups were tested in non-rewarded discrimination tests with the two colors. Only bees trained with differential conditioning preferred the previously learned color, whereas bees of the absolute conditioning group, and a stimuli-naïve group, chose randomly among color stimuli. All bees were then kept individually for three days in the dark to allow for complete long-term memory formation. Whole-mount immunostaining was subsequently used to quantify variation of microglomeruli number and density in the mushroom-body lip and collar. We found no significant differences among groups in neuropil volumes and total microglomeruli numbers, but learning performance was negatively correlated with microglomeruli density in the absolute conditioning group. Based on these findings we aim to promote future research approaches combining behaviorally relevant color learning tests in honeybees under free-flight conditions with neuroimaging analysis; we also discuss possible limitations of this approach.

The interaction between surface color and color knowledge: behavioral and electrophysiological evidence.

Science.gov (United States)

Bramão, Inês; Faísca, Luís; Forkstam, Christian; Inácio, Filomena; Araújo, Susana; Petersson, Karl Magnus; Reis, Alexandra

2012-02-01

In this study, we used event-related potentials (ERPs) to evaluate the contribution of surface color and color knowledge information in object identification. We constructed two color-object verification tasks - a surface and a knowledge verification task - using high color diagnostic objects; both typical and atypical color versions of the same object were presented. Continuous electroencephalogram was recorded from 26 subjects. A cluster randomization procedure was used to explore the differences between typical and atypical color objects in each task. In the color knowledge task, we found two significant clusters that were consistent with the N350 and late positive complex (LPC) effects. Atypical color objects elicited more negative ERPs compared to typical color objects. The color effect found in the N350 time window suggests that surface color is an important cue that facilitates the selection of a stored object representation from long-term memory. Moreover, the observed LPC effect suggests that surface color activates associated semantic knowledge about the object, including color knowledge representations. We did not find any significant differences between typical and atypical color objects in the surface color verification task, which indicates that there is little contribution of color knowledge to resolve the surface color verification. Our main results suggest that surface color is an important visual cue that triggers color knowledge, thereby facilitating object identification. Copyright © 2011 Elsevier Inc. All rights reserved.

Color stability of esthetic coatings applied to nickel-titanium archwires

Directory of Open Access Journals (Sweden)

Marcus Vinicius Neiva Nunes do REGO

Full Text Available Abstract Introduction Color stability is an important feature to be considered when using esthetic coated archwires. Objective To evaluate color changes on the surface of esthetic nickel-titanium archwires coated with Teflon (Ortho Organizers, USA or epoxy resin (Tecnident, Brazil after immersion in staining solution. Material and method Twelve 20-mm-long wire segments were used for each type of coating, which were mounted as two test specimens with a width of 7 mm each. The buccal surface of the archwires was evaluated for fluorescence and color measurements both at baseline and after immersion in a staining solution for 21 days using the VITA Easyshade® Compact spectrophotometer (Model DEASYC220. Differences in total color change according to coating type were compared using an independent samples t-test (p<0.05. The surface characteristics of as-received coated archwires were assessed using scanning electron microscopy. Result Color changes were observed on the esthetic coatings, with a significant difference between the two brands analyzed. Surface analysis revealed flaws such as wear, pitting, elevations, lack of material, granulation, grooves, cracks, and lack of standardization in the coating process in all as-received archwires, but flaws were less evident in epoxy-resin coatings. Conclusion The two esthetic coatings did not show color stability, but Teflon coatings showed a more intense color change than epoxy-resin coatings.

The weight of color

OpenAIRE

Brunberg, Mikael

2013-01-01

This paper explores the weight of color, with the focus lying on the symbolic significance ofcolor. Exploring whether color in itself conveys symbolic significance and is the symbolicsignificance of color permanent, or is it an after construction? It will be looking at differentareas such as what makes us humans able to perceive colors in the first place, beginning withan insight at some of the foundations in the area of color theory. Mentioning experiments ondecomposed white light, that cont...

In vitro color stability of provisional restorative materials.

Science.gov (United States)

Jalali, Hamid; Dorriz, Hassan; Hoseinkhezri, Farzaneh; Emadian Razavi, S F

2012-01-01

Discoloration of provisional restorations can result in esthetic problems which are critically important in, for example, anterior areas and may compromise the acceptability of the restoration. The purpose of this study was to investigate the effect of tea on provisional restorative materials. This study was designed to measure the degree of color change of three acrylic resin provisional materials, before and after immersion in artificial saliva and artificial saliva-tea solution for 2 and 4 weeks. Three types of acrylic provisional materials (duralay, tempron, acropars TRP), were studied. Twenty disks (20 ± 0.1 mm by 2 ± 0.05 mm) were fabricated from each material. Specimens were polished with acrylic bur using pumice and diamond polishing paste. Base line color was measured using a spectrophotometer. Ten disks were stored in artificial saliva and 10 were stored in a solution of artificial saliva and tea at room temperature. Color measurements were made after 2 and 4 weeks of immersion. Differences in color changes were compared by two way ANOVA, across the six groups, followed by a Turkey-Kramer's multiple comparison test. For specimens immersed in artificial saliva, the color change of methyl methacrylate materials; duralay (ΔE=4.94) and tempron (ΔE=6.54), was significantly more than butyl methacrylate material; acropars (ΔE=4.10). After immersion in an artificial saliva- tea solution, tempron exhibited less color change (ΔE=8.50) compared to duralay (ΔE=10.93) and acropars (ΔE=15.64). Color stability of methyl methacrylate is higher than butyl methacrylates so if provisional materials are used for extended periods of time; tempron is preferred.

Structural color changes in permanent enamel of patients with cleft lip and palate: a case-control study.

Science.gov (United States)

Kulas, Antje; Illge, Christina; Bekes, Katrin; Eckert, Alexander W; Fuhrmann, Robert A W; Hirsch, Christian

2016-01-01

White spots are more common in patients with cleft lip and palate (CLP) than in the normal population. Whether these are due to the cleft itself or concomitant circumstances (e.g., surgical procedures, orthodontic treatments, systemic fluoridation, increased caries risk) remains unclear. This case-control study evaluated both their prevalence in CLP patients versus control subjects and associated risk factors. A total of 73 CLP patients (average age 8.7 years, range 6-18 years, 42 % male) and a control group of 73 age- and gender-matched non-CLP patients were included. Enamel color changes, subsuming mineralization defects (DDE index), mild dental fluorosis (Dean's index), and initial caries (ICDAS score 2), were recorded. Caries index (dmf-t/DMF-T) scores were also recorded to distinguish between high or low caries risk as defined by the Deutsche Arbeitsgemeinschaft für Jugendzahnpflege criteria. Histories of systemic fluoridation, trauma to primary teeth, surgery, and orthodontic treatment were obtained using a questionnaire. Statistical analysis included t test, χ (2) test, and multivariable logistic regression. Enamel color changes were observed three times more often in the CLP group than in the control group (39.7 vs. 12.3 %; p enamel color changes was associated with CLP itself [OR (odds ratio) 3.6; 95 % confidence interval (CI) 1.3-9.9] and table salt plus tablets combined for systemic fluoridation (OR 2.7, 95 % CI 1.1-6.9). No increased risks were identified for increased caries risk, history of primary-tooth trauma, or history of orthodontic treatment. The higher prevalence of enamel color changes in the CLP group (more than threefold compared to the control group) was not related to previous orthodontic treatments; however, systemic fluoridation (table salt and tablets) constituted a risk factor for the enamel color changes seen in the CLP patients.

Analysis of the Color and Fluorescence Alterations of Enamel and Dentin Treated With Hydrogen Peroxide.

Science.gov (United States)

Caneppele, Taciana Marco Ferraz; Rocha Gomes Torres, Carlos; Bresciani, Eduardo

2015-10-01

The aim of this study was to evaluate the effect of hydrogen peroxide whitening on fluorescence and color of bovine enamel and dentin. Twenty five dentin discs and 25 enamel discs, with 6 mm diameter and 1 mm thick, were obtained. Direct fluorescence (spectrofluorophotometry) and color (spectrophotometry) were assessed. After fluorescence and color baseline measurements, specimens were immersed in a 35% hydrogen peroxide (HP) solution for 1 h. This procedure was repeated after 7 days. Final fluorescence and color measurements were performed after the second immersion. Chemical characterization of 5 additional specimens was also performed. Data were submitted to repeated analysis of variance and Tukey's test for fluorescence and unpaired t-test for color and chemical components (pwhitening. Enamel presented lower fluorescence than dentin at baseline, but this parameter did not decrease after whitening. Color changes were observed for both substrates, with significantly greater whitening effect in dentin (ΔE=10.37) (pWhitening by hydrogen peroxide induced significant decrease in fluorescence of tooth dentin and promoted significant color changes in dentin and enamel with more accentuated outcomes in dentin.

Effects of cold light bleaching on the color stability of composite resins

Science.gov (United States)

Cao, Liqun; Huang, Lijuan; Wu, Meisheng; Wei, Hua; Zhao, Shouliang

2015-01-01

To evaluate the effects of cold light bleaching on the color stability of four restorations using a thermocycling stain challenge. 160 specimens (10 mm in diameter and 2 mm thick) were fabricated from 4 composite resins (Gradia Direct-A, Z350XT, Premisa, and Précis) and divided into 4 subgroups. Color was assessed according to the CIEL*a*b* color scale at baseline, after the first cycle of bleaching, after thermocycling stain challenges, and after the second cycle of bleaching. Mean values were compared using three-way analysis of variance, and multiple comparisons of the mean values were performed using the Tukey-Kramer test. All groups showed significant color changes after stain challenge, the color change was more significant in Gradia Direct and Z350XT than in Premisa and Précis. After the second cycle of bleaching, color mostly recovered to its original values. The color stability of Gradia Direct and Z350XT was inferior to that of Premisa and Précis. The discoloration of composite resin materials can be partly removed after cold light bleaching. PMID:26309549

Development of the RGB LEDs color mixing mechanism for stability the color temperature at different projection distances.

Science.gov (United States)

Hung, Chih-Ching

2015-01-01

In lighting application, the color mixing of the RGB LEDs can provide more color selection in correlated color temperature and color rendering. Therefore, the purpose of this study is to propose a RGB color mixing mechanism by applying the mechanism design. Three sets of lamp-type RGB LEDs are individually installed on three four-bar linkages. A crank is used to drive three groups of RGB LEDs lamp-type to project lights onto a single plane in order to mix the lights. And, simulations of the illuminance and associated color temperatures are conducted by changing the distance to the projection plane, under the assumption that the stability of the color temperature of the projected light does not change according to the projecting height. Thus, the effect of change in the color temperature on color determination by the humans' eyes was avoided. The success of the proposed method will allow medical personnel to choose suitable wavelengths and color temperatures according to the particular requirements of their medical-examination environments.

Pink-color sign in esophageal squamous neoplasia, and speculation regarding the underlying mechanism

Science.gov (United States)

Ishihara, Ryu; Kanzaki, Hiromitsu; Iishi, Hiroyasu; Nagai, Kengo; Matsui, Fumi; Yamashina, Takeshi; Matsuura, Noriko; Ito, Takashi; Fujii, Mototsugu; Yamamoto, Sachiko; Hanaoka, Noboru; Takeuchi, Yoji; Higashino, Koji; Uedo, Noriya; Tatsuta, Masaharu; Tomita, Yasuhiko; Ishiguro, Shingo

2013-01-01

AIM: To investigate the reasons for the occurrence of the pink-color sign of iodine-unstained lesions. METHODS: In chromoendoscopy, the pink-color sign of iodine-unstained lesions is recognized as useful for the diagnosis of esophageal squamous cell carcinoma. Patients with superficial esophageal neoplasms treated by endoscopic resection were included in the study. Areas of mucosa with and without the pink-color sign were evaluated histologically. The following histologic features that were possibly associated with the pink-color sign were evaluated. The keratinous layer and basal cell layer were classified as present or absent. Cellular atypia was classified as high grade, moderate grade or low grade, based on nuclear irregularity, mitotic figures, loss of polarity, chromatin pattern and nuclear/cytoplasmic ratio. Vascular change was assessed based on dilatation, tortuosity, caliber change and variability in shape. Vessels with these four findings were classified as positive for vascular change. Endoscopic images of the lesions were captured immediately after iodine staining, 2-3 min after iodine staining and after complete fading of iodine staining. Quantitative analysis of color changes after iodine staining was also performed. RESULTS: A total of 61 superficial esophageal neoplasms in 54 patients were included in the study. The lesions were located in the cervical esophagus in one case, the upper thoracic esophagus in 10 cases, the mid-thoracic esophagus in 33 cases, and the lower thoracic esophagus in 17 cases. The median diameter of the lesions was 20 mm (range: 2-74 mm). Of the 61 lesions, 28 were classified as pink-color sign positive and 33 as pink-color sign negative. The histologic diagnosis was high-grade intraepithelial neoplasia (HGIN) or cancer invading into the lamina propria in 26 of the 28 pink-color sign positive lesions. There was a significant association between pink-color sign positive epithelium and HGIN or invasive cancer (P = 0

Color change of gemstones by exposure to gamma rays

Energy Technology Data Exchange (ETDEWEB)

Lima, Giovanna L.C. de; Lameiras, Fernando S., E-mail: giovannalarissa17@hotmail.com, E-mail: fsl@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2015-07-01

A gem is appreciated by collectors and, when polished, widely used for jewelry manufacturing. For example, when quartz naturally or artificially acquires a color it becomes a gemstone (smoky quartz, morion, citrine, amethyst, or prasyolite). The presence of chromophore elements in a quartz sample was analysed by Fourier transform infrared spectrometry (FTIR). With a semi-quantitative analysis of the absorption FTIR spectra, it was possible to predict if colorless quartz has the potential to develop color when exposed to ionizing radiation and heat. Specific absorption bands show the presence of chromophore elements in quartz such as aluminum, iron, hydrogen, sodium, or lithium. Considering the ratio of the heights of the absorption bands of these elements, it was possible to predict the color quartz can develop. Samples of irradiated dark and light violet fluorites were analyzed by FTIR and energy-dispersive X-rays spectroscopy. The light violet samples has higher content of calcium relative to fluorine, as well higher content of hydroxyl, probably replacing fluorine in crystal lattice. Hydroxyls cannot be precursors of F color centers, which are the cause of violet color in fluorite, explaining the light violet color of hydroxyl-rich samples. (author)

Color change of gemstones by exposure to gamma rays

International Nuclear Information System (INIS)

Lima, Giovanna L.C. de; Lameiras, Fernando S.

2015-01-01

A gem is appreciated by collectors and, when polished, widely used for jewelry manufacturing. For example, when quartz naturally or artificially acquires a color it becomes a gemstone (smoky quartz, morion, citrine, amethyst, or prasyolite). The presence of chromophore elements in a quartz sample was analysed by Fourier transform infrared spectrometry (FTIR). With a semi-quantitative analysis of the absorption FTIR spectra, it was possible to predict if colorless quartz has the potential to develop color when exposed to ionizing radiation and heat. Specific absorption bands show the presence of chromophore elements in quartz such as aluminum, iron, hydrogen, sodium, or lithium. Considering the ratio of the heights of the absorption bands of these elements, it was possible to predict the color quartz can develop. Samples of irradiated dark and light violet fluorites were analyzed by FTIR and energy-dispersive X-rays spectroscopy. The light violet samples has higher content of calcium relative to fluorine, as well higher content of hydroxyl, probably replacing fluorine in crystal lattice. Hydroxyls cannot be precursors of F color centers, which are the cause of violet color in fluorite, explaining the light violet color of hydroxyl-rich samples. (author)

Bare-part color in female budgerigars changes from brown to structural blue following testosterone treatment but is not strongly masculinized.

Directory of Open Access Journals (Sweden)

Stefanie E P Lahaye

Full Text Available Whereas several studies have shown that experimentally increased levels of the androgenic steroid testosterone can affect female behavior, fewer studies have focused on the activational effects of exogenous testosterone on female morphology. With respect to colorful displays in birds, almost exclusively the effects of testosterone manipulation on female carotenoid-based colorations have been studied. Other color types such as structural colors (i.e. UV, blue and violet colors that result from differential light reflection in the nanostructures of the tissue remain largely unstudied. Here, we investigated the short- and long-term effects of exogenous testosterone on the expression of structural bare-part coloration in female budgerigars, Melopsittacus undulatus. In this parrot species, bare-part coloration is expressed in the cere, a structure over the beak which is brown in females and structural blue in males. We experimentally increased plasma testosterone levels in testosterone-treated females (T-females compared to controls (C-females and we performed weekly spectrophotometric measurements of the cere for five weeks after implantation and one measurement after ten weeks. We also estimated the extent to which testosterone masculinized female cere color by comparing the experimental females with untreated males. We found significant effects of testosterone on cere color from week four after implantation onwards. T-females expressed significantly bluer ceres than C-females with higher values for brightness and UV reflectance. T-female cere color, however, remained significantly less blue than in males, while values for brightness and UV reflectance were significantly higher in T-females than in males. Our quantitative results show that exogenous testosterone induces the expression of structural blue color in females but does not strongly masculinize female cere coloration. We provide several potential pathways for the action of testosterone on

Perception of color emotions for single colors in red-green defective observers.

Science.gov (United States)

Sato, Keiko; Inoue, Takaaki

2016-01-01

It is estimated that inherited red-green color deficiency, which involves both the protan and deutan deficiency types, is common in men. For red-green defective observers, some reddish colors appear desaturated and brownish, unlike those seen by normal observers. Despite its prevalence, few studies have investigated the effects that red-green color deficiency has on the psychological properties of colors (color emotions). The current study investigated the influence of red-green color deficiency on the following six color emotions: cleanliness, freshness, hardness, preference, warmth, and weight. Specifically, this study aimed to: (1) reveal differences between normal and red-green defective observers in rating patterns of six color emotions; (2) examine differences in color emotions related to the three cardinal channels in human color vision; and (3) explore relationships between color emotions and color naming behavior. Thirteen men and 10 women with normal vision and 13 men who were red-green defective performed both a color naming task and an emotion rating task with 32 colors from the Berkeley Color Project (BCP). Results revealed noticeable differences in the cleanliness and hardness ratings between the normal vision observers, particularly in women, and red-green defective observers, which appeared mainly for colors in the orange to cyan range, and in the preference and warmth ratings for colors with cyan and purple hues. Similarly, naming errors also mainly occurred in the cyan colors. A regression analysis that included the three cone-contrasts (i.e., red-green, blue-yellow, and luminance) as predictors significantly accounted for variability in color emotion ratings for the red-green defective observers as much as the normal individuals. Expressly, for warmth ratings, the weight of the red-green opponent channel was significantly lower in color defective observers than in normal participants. In addition, the analyses for individual warmth ratings in

Perception of color emotions for single colors in red-green defective observers

Directory of Open Access Journals (Sweden)

Keiko Sato

2016-12-01

Full Text Available It is estimated that inherited red-green color deficiency, which involves both the protan and deutan deficiency types, is common in men. For red-green defective observers, some reddish colors appear desaturated and brownish, unlike those seen by normal observers. Despite its prevalence, few studies have investigated the effects that red-green color deficiency has on the psychological properties of colors (color emotions. The current study investigated the influence of red-green color deficiency on the following six color emotions: cleanliness, freshness, hardness, preference, warmth, and weight. Specifically, this study aimed to: (1 reveal differences between normal and red-green defective observers in rating patterns of six color emotions; (2 examine differences in color emotions related to the three cardinal channels in human color vision; and (3 explore relationships between color emotions and color naming behavior. Thirteen men and 10 women with normal vision and 13 men who were red-green defective performed both a color naming task and an emotion rating task with 32 colors from the Berkeley Color Project (BCP. Results revealed noticeable differences in the cleanliness and hardness ratings between the normal vision observers, particularly in women, and red-green defective observers, which appeared mainly for colors in the orange to cyan range, and in the preference and warmth ratings for colors with cyan and purple hues. Similarly, naming errors also mainly occurred in the cyan colors. A regression analysis that included the three cone-contrasts (i.e., red-green, blue-yellow, and luminance as predictors significantly accounted for variability in color emotion ratings for the red-green defective observers as much as the normal individuals. Expressly, for warmth ratings, the weight of the red-green opponent channel was significantly lower in color defective observers than in normal participants. In addition, the analyses for individual warmth

Use of image analysis to assess color response on plants caused by herbicide application

DEFF Research Database (Denmark)

Asif, Ali; Streibig, Jens Carl; Duus, Joachim

2013-01-01

by herbicides. The range of color components of green and nongreen parts of the plants and soil in Hue, Saturation, and Brightness (HSB) color space were used for segmentation. The canopy color changes of barley, winter wheat, red fescue, and brome fescue caused by doses of a glyphosate and diflufenican mixture...... for the green and nongreen parts of the plants and soil were different. The relative potencies were not significantly different from one, indicating that visual and image analysis estimations were about the same. The comparison results suggest that image analysis can be used to assess color changes of plants......In herbicide-selectivity experiments, response can be measured by visual inspection, stand counts, plant mortality, and biomass. Some response types are relative to nontreated control. We developed a nondestructive method by analyzing digital color images to quantify color changes in leaves caused...

Experimental Study on Color Durability of Color Asphalt Pavement

Science.gov (United States)

Ning, Shi; Huan, Su

2017-06-01

Aiming at the poor Color durability and the lack of research on Color asphalt pavement, spraying an anti-tire trace seal resin emulsion on the surface, a Color durable asphalt pavement was proposed. After long-term rolling and long-term aging test, the Color durability was evaluated by RGB function in Photoshop and trace residue rate formula. Test results proved that the Evaluation method was simple and effective. After long-term rolling, the Color of the road surface tends to a constant value. Spraying the emulsion on the road surface can resist tire traces. After long-term aging test, the resistance to tire traces was increased by 26.6% compared with the conventional type, while the former was 44.1% higher than the latter without long-term aging. The Color durable asphalt pavement can effectively improve the ability of Color asphalt pavement to resist tire traces, and significantly improve the Color durability of Color asphalt pavement.

Evaluation of Degradation Kinetic of Tomato Paste Color in Heat Processing and Modeling of These Changes by Response Surface Methodology

Directory of Open Access Journals (Sweden)

M. Ganjeh

2015-12-01

Full Text Available Color is an important qualitative factor in tomato products such as tomato paste which is affected by heat processing. The main goal of this study was to evaluate the degradation kinetics of tomato paste color during heat processing by Arrhenius equation and modeling of these changes by response surface methodology (RSM. Considering this purpose, tomato paste was processed at three temperatures of 60, 70 and 80 °C for 25-100 minutes and by three main color indices including L, a and b, a/b ratio, total color difference (TCD, Saturation index (SI and hue angle (HU was analyzed. Degradation kinetics of these parameters was evaluated by Arrhenius equation and their changing trends were modeled by RSM. All parameters except TCA (zero order followed a first order reaction. The b index by highest and TCA and a/b by least activation energies had the maximum and minimum sensitivity to the temperature changes, respectively. Also, TCD and b had the maximum and minimum changing rates, respectively. All responses were influenced by independent parameters (the influence of temperature was more than time and RSM was capable of modeling and predicting these responses. In general, Arrhenius equation was appropriate to evaluate degradation kinetics of tomato paste color changes and RSM was able to estimate independent and interaction effects of time and temperature so that quadratic models were capable to predict these changes by a high accuracy (R2 > 0.95.

Does Blue Uniform Color Enhance Winning Probability in Judo Contests?

Directory of Open Access Journals (Sweden)

Peter D. Dijkstra

2018-01-01

Full Text Available The color of an athlete's uniform may have an effect on psychological functioning and consequently bias the chances of winning contests in sport competition. Several studies reported a winning bias for judo athletes wearing a blue outfit relative to those wearing a white outfit. However, we argue there is no winning bias and that previous studies were confounded and based on small and specific data sets. We tested whether blue biases winning in judo using a very extensive judo data set (45,874 contests from all international judo tournaments between 2008 and 2014. In judo, the first called athlete for the fight used to wear the blue judogi but this was changed to the white judogi in 2011. This switch enabled us to compare the win bias before and after this change to isolate the effect of the color of the judogi. We found a significant win bias for the first called athlete, but this effect was not significantly related to the color of the judogi. The lack of a significant win effect of judogi color suggests that blue does not bias winning in judo, and that the blue-white pairing ensures an equal level of play. Our study shows the importance of thoroughly considering alternative explanations and using extensive datasets in color research in sports and psychology.

Does Blue Uniform Color Enhance Winning Probability in Judo Contests?

Science.gov (United States)

Dijkstra, Peter D; Preenen, Paul T Y; van Essen, Hans

2018-01-01

The color of an athlete's uniform may have an effect on psychological functioning and consequently bias the chances of winning contests in sport competition. Several studies reported a winning bias for judo athletes wearing a blue outfit relative to those wearing a white outfit. However, we argue there is no winning bias and that previous studies were confounded and based on small and specific data sets. We tested whether blue biases winning in judo using a very extensive judo data set (45,874 contests from all international judo tournaments between 2008 and 2014). In judo, the first called athlete for the fight used to wear the blue judogi but this was changed to the white judogi in 2011. This switch enabled us to compare the win bias before and after this change to isolate the effect of the color of the judogi . We found a significant win bias for the first called athlete, but this effect was not significantly related to the color of the judogi . The lack of a significant win effect of judogi color suggests that blue does not bias winning in judo, and that the blue-white pairing ensures an equal level of play. Our study shows the importance of thoroughly considering alternative explanations and using extensive datasets in color research in sports and psychology.

A bioinspired color-changing polystyrene microarray as a rapid qualitative sensor for methanol and ethanol

International Nuclear Information System (INIS)

Kuo, Wen-Kai; Weng, Hsueh-Ping; Hsu, Jyun-Jheng; Yu, Hsin Her

2016-01-01

Polystyrene (PS) microspheres were synthesized by emulsifier-free emulsion polymerization and arranged in an array of closely packed, opal-like photonic crystals by slow self-assembly through dip-coating. This periodic array of PS microspheres was then employed as a rapid qualitative sensor for methanol and ethanol. Both solvents could be detected rapidly based on the routes of their reflection coordinates in the chromaticity diagram or directly by the naked eye on the basis of the change in color within 1 min once a solvent sample had been placed on the PS photochromic sensor. This opal-like PS sensor can thus not only be employed as a rapid sensor for methanol and ethanol but can also be used as a powerful tool for the fast screening of illicit drugs and toxic chemicals during forensic investigations. - Highlights: • Opal-like array of polystyrene (PS) microspheres is synthesized by self-assembly. • This periodic PS array is used as a rapid sensor for methanol and ethanol. • Solvents are detected by routes of reflection coordinates in chromaticity diagram. • They are also detected directly by naked eye based on change in color of sensor. • The color change is irreversible for methanol but reversible for ethanol.

A bioinspired color-changing polystyrene microarray as a rapid qualitative sensor for methanol and ethanol

Energy Technology Data Exchange (ETDEWEB)

Kuo, Wen-Kai, E-mail: wkkuo@nfu.edu.tw [Graduate Institute of Electro-Optical and Materials Science, National Formosa University, 64 Wenhua Road, Huwei, Yunlin 63208, Taiwan (China); Weng, Hsueh-Ping, E-mail: sherry.weng7949@gmail.com [Graduate Institute of Electro-Optical and Materials Science, National Formosa University, 64 Wenhua Road, Huwei, Yunlin 63208, Taiwan (China); Hsu, Jyun-Jheng, E-mail: k88520x@gmail.com [Graduate Institute of Electro-Optical and Materials Science, National Formosa University, 64 Wenhua Road, Huwei, Yunlin 63208, Taiwan (China); Yu, Hsin Her, E-mail: hhyu@nfu.edu.tw [Department of Biotechnology, National Formosa University, 64 Wenhua Road, Huwei, Yunlin 63208, Taiwan (China)

2016-04-15

Polystyrene (PS) microspheres were synthesized by emulsifier-free emulsion polymerization and arranged in an array of closely packed, opal-like photonic crystals by slow self-assembly through dip-coating. This periodic array of PS microspheres was then employed as a rapid qualitative sensor for methanol and ethanol. Both solvents could be detected rapidly based on the routes of their reflection coordinates in the chromaticity diagram or directly by the naked eye on the basis of the change in color within 1 min once a solvent sample had been placed on the PS photochromic sensor. This opal-like PS sensor can thus not only be employed as a rapid sensor for methanol and ethanol but can also be used as a powerful tool for the fast screening of illicit drugs and toxic chemicals during forensic investigations. - Highlights: • Opal-like array of polystyrene (PS) microspheres is synthesized by self-assembly. • This periodic PS array is used as a rapid sensor for methanol and ethanol. • Solvents are detected by routes of reflection coordinates in chromaticity diagram. • They are also detected directly by naked eye based on change in color of sensor. • The color change is irreversible for methanol but reversible for ethanol.

The mere exposure effect is sensitive to color information: evidence for color effects in a perceptual implicit memory test.

Science.gov (United States)

Hupbach, Almut; Melzer, André; Hardt, Oliver

2006-01-01

Priming effects in perceptual tests of implicit memory are assumed to be perceptually specific. Surprisingly, changing object colors from study to test did not diminish priming in most previous studies. However, these studies used implicit tests that are based on object identification, which mainly depends on the analysis of the object shape and therefore operates color-independently. The present study shows that color effects can be found in perceptual implicit tests when the test task requires the processing of color information. In Experiment 1, reliable color priming was found in a mere exposure design (preference test). In Experiment 2, the preference test was contrasted with a conceptually driven color-choice test. Altering the shape of object from study to test resulted in significant priming in the color-choice test but eliminated priming in the preference test. Preference judgments thus largely depend on perceptual processes. In Experiment 3, the preference and the color-choice test were studied under explicit test instructions. Differences in reaction times between the implicit and the explicit test suggest that the implicit test results were not an artifact of explicit retrieval attempts. In contrast with previous assumptions, it is therefore concluded that color is part of the representation that mediates perceptual priming.

Effects of water depth and substrate color on the growth and body color of the red sea cucumber, Apostichopus japonicus

Science.gov (United States)

Jiang, Senhao; Dong, Shuanglin; Gao, Qinfeng; Ren, Yichao; Wang, Fang

2015-05-01

Three color variants of the sea cucumber, Apostichopus japonicus are recognized, the red one is highly valued in the market. When the red variant is cultured in ponds in China, its body color changes from red to celadon in 3-6 months. The effects of water depth and substrate color on the growth and body color of this animal were investigated. Juveniles of red A. japonicus were cultured in cages suspended at a range of water depths (20, 50, 100, 150 and 200 cm). The specific growth rate of red sea cucumbers was significantly higher in animals cultured at deeper water layers compared with those grown at shallowers. Body weights were greatest for sea cucumbers cultured at a depth of 150 cm and their survival rates were highest at a depth of 200 cm. A scale to evaluate the color of red sea cucumbers ( R value) was developed using a Pantone standard color card. All stocked animals in the 9-month trial retained a red color, however the red body color was much more intense in sea cucumbers cultured at shallower depths, while animals suspended in deeper layers became pale. In a separate trial, A. japonicus were cultured in suspended cages with seven different colored substrates. Substrate color had a significant effect on the growth and body-color of red A. japonicus. The yield were greatest for A. japonicus cultured on a yellow substrate, followed by green > white > orange > red > black and blue. All sea cucumbers in the 7-month trial retained a red color, although the red was most intense (highest R value) in animals cultured on a blue substrate and pale (lowest R value) for animals cultured on a green substrate.

Effects of polishing procedures on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2009-04-01

Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

Color-Changing Sensors for Detecting the Presence of Hypergolic Fuels

Science.gov (United States)

Roberson, Luke; Captain, Janine; Santiago-Maldonado, Edgardo; Starr, Stanley; DeVor, Robert

2013-01-01

Hypergolic fuel sensors were designed to incorporate novel chemochromic pigments into substrates for use in various methods of leak detection. There are several embodiments to this invention that would provide specific visual indication of hypergols used during and after transfer. The ability to incorporate these pigments into various polymer matrices provides a unique opportunity to manufacture nearly any type of sensor shape that is required. The vibrant color change from yellow to black instantaneously shows the worker the presence of hypergols in the area.

Full color camouflage in a printable photonic blue-colored polymer

NARCIS (Netherlands)

Moirangthem, M.; Schenning, A.P.H.J.

2018-01-01

A blue reflective photonic polymer coating which can be patterned in full color, from blue to red, by printing with an aqueous calcium nitrate solution has been fabricated. Color change in the cholesteric liquid-crystalline polymer network over the entire visible spectrum is obtained by the use of

Evaluation of the effect of various types of fluoride varnishes on color stability of a composite resin

Directory of Open Access Journals (Sweden)

Effat Khodadadi

2017-01-01

Full Text Available BACKGROUND AND AIM: Fluoride varnish as an extrinsic factor may cause discoloration in tooth-colored restorative materials. This research compared the impact of different fluoride varnishes on color change of a composite restorative material. METHODS: This laboratory experimental study was conducted on 40 specimens of flowable composite resin were divided into four groups based on the brand of applied varnishes (Durashield, Nupro, Fluorilaque, and Profluoride varnishes (n = 10. Color measuring (ΔE was performed using the easy shade device and according to Commission Internationale de l’Eclairage (CIE L*a*b* system at three times: 24 hours after immersing in artificial salvia (baseline, 24 hours after fluoride varnishes application and after brushing. The amount of color changes was calculated for all of the specimens as follows: ΔE1 (difference between fluoride application-base line, ΔE2 (difference between brushing-fluoride application, and ΔE3 (difference between brushing-base line. P < 0.05 was considered as significant. Statistical analysis was performed by one-way ANOVA and post-hoc Tukey. RESULTS: The maximum and minimum color changes after applying varnishes were observed by Nupro and Profluoride, respectively. A significant difference was observed between ΔE 1 values of all types of studied varnishes (P < 0.01 except Durashield and Fluorilaque (P = 0.35. After brushing, no significant difference was shown between color change of stained specimens due to Durashield, Fluorilaque, and Nupro. There was no significant difference between ΔE 3 values of Durashield and Fluorilaque. CONCLUSION: Trends of color change after using all studied varnishes were clinically acceptable (ΔE < 3.3. Durashield, Nupro, Fluorilaque, and Profluoride varnishes can be used without adversely affecting the color of flowable composite resin.

Extrinsic Tooth Enamel Color Changes and Their Relationship with the Quality of Water Consumed

Directory of Open Access Journals (Sweden)

Maria da Luz Rosário de Sousa

2012-10-01

Full Text Available The quality of the consumed drinking water may affect oral health. For example, the presence of iron in drinking water can cause aesthetic problems related to changes in dental enamel color. This study assessed the prevalence of extrinsic enamel color changes and their relationship with the quality of the water in the town of Caapiranga/AM-Brazil. Three hundred and forty six residents of the urban area were examined, and they also answered a questionnaire on eating habits and self-perceived oral health. As the initial results indicated an insufficient number of observations for the application of variance analysis (one-way ANOVA, the Student t test was chosen to compare levels of iron content in the water coming from two sources. The change in tooth color had a prevalence of 5.78% (20 people. The majority of the population (n = 261, 75.43% consumed well water. Those who presented extrinsic stains were uncomfortable with the appearance of their teeth (15.09%. We conclude that while there is excess of iron in the water in this region of Brazil, no association between extrinsic stains on the enamel and the level of iron in the water was found. There was a low prevalence of extrinsic stains in Caaparinga, being found only in children and adolescents. In the present study, an association between the presence of stains and the consumption of açai was determined, and those who presented them felt uncomfortable about their aesthetics.

Effects of Room Color on Mirror-Tracing by Junior High School Girls.

Science.gov (United States)

Bross, Cindy; Jackson, Karen

1981-01-01

Girls in Grades 7, 8, and 9 practiced mirror-tracing in a neutral colored room to a criterion before being tested in their preferred or nonpreferred colored rooms. The errors decreased significantly in the preferred room, while the time to complete changed minimally. (Author)

When Did Coloring Books Become Mindful? Exploring the Effectiveness of a Novel Method of Mindfulness-Guided Instructions for Coloring Books to Increase Mindfulness and Decrease Anxiety.

Science.gov (United States)

Mantzios, Michail; Giannou, Kyriaki

2018-01-01

Mindfulness has been associated with the use of coloring books for adults; however, the question of whether they do increase mindfulness has not been addressed. In two studies, we attempted to identify whether mindfulness is increased, and whether there is a need for ongoing guidance while coloring, similar to mindfulness meditation. In the first randomized controlled experiment, university students ( n = 88) were assigned to an unguided mandala coloring group (i.e., described in mainstream literature as a mindfulness practice) or to a free-drawing group. Measurements of state mindfulness and state anxiety were taken pre- and post- experiment. Results indicated no change in mindfulness or anxiety. In the second randomized controlled experiment, university students ( n = 72) were assigned to an unguided mandala coloring group (i.e., same as Experiment 1), or, to a mindfulness-guided coloring group (i.e., same as the unguided coloring group with a mindfulness practitioner guiding participants as in mindfulness breathing meditation, with instructions modified and applied to coloring). Results indicated that the mindfulness-guided mandala coloring group performed better in decreasing anxiety, but no change was observed in mindfulness. Exit interviews revealed that some participants did not like the voice guiding them while coloring, which suggested further differing and significant findings. While mindfulness-guided coloring appears promising, guidance or instructions on how to color mindfully may require further development and adjustment to enhance health and wellbeing.

Color back projection for fruit maturity evaluation

Science.gov (United States)

Zhang, Dong; Lee, Dah-Jye; Desai, Alok

2013-12-01

In general, fruits and vegetables such as tomatoes and dates are harvested before they fully ripen. After harvesting, they continue to ripen and their color changes. Color is a good indicator of fruit maturity. For example, tomatoes change color from dark green to light green and then pink, light red, and dark red. Assessing tomato maturity helps maximize its shelf life. Color is used to determine the length of time the tomatoes can be transported. Medjool dates change color from green to yellow, and the orange, light red and dark red. Assessing date maturity helps determine the length of drying process to help ripen the dates. Color evaluation is an important step in the processing and inventory control of fruits and vegetables that directly affects profitability. This paper presents an efficient color back projection and image processing technique that is designed specifically for real-time maturity evaluation of fruits. This color processing method requires very simple training procedure to obtain the frequencies of colors that appear in each maturity stage. This color statistics is used to back project colors to predefined color indexes. Fruit maturity is then evaluated by analyzing the reprojected color indexes. This method has been implemented and used for commercial production.

Visualizing Nanocatalysts in Action from Color Change Reaction to Magnetic Recycling and Reuse

Science.gov (United States)

Hudson, Reuben; Bishop, Alexandra; Glaisher, Samuel; Katz, Jeffrey L.

2015-01-01

A demonstration to highlight the utility and ease of handling environmentally benign magnetically recoverable nanoparticle catalysts is described. The demonstration offers two powerful visuals. The first is a color change oxidation of tetramethylbenzidine by hydrogen peroxide catalyzed by Fe[subscript 3]O[subscript 4] nanoparticles. The second,…

ColorMoves: Optimizing Color's Potential for Exploration and Communication of Data

Science.gov (United States)

Samsel, F.

2017-12-01

Color is the most powerful perceptual channel available for exposing and communicating data. Most visualizations are rendered in one of a handful of common colormaps - the rainbow, cool-warm, heat map and viridis. These maps meet the basic criteria for encoding data - perceptual uniformity and reasonable discriminatory power. However, as the size and complexity of data grows, our need to optimize the potential of color grows. The ability to expose greater detail and differentiate between multiple variables becomes ever more important. To meet this need we have created ColorMoves, an interactive colormap construction tool that enables scientists to quickly and easily align a concentration contrast with the data ranges of interest. Perceptual research tells us that luminance is the strongest contrast and thus provides the highest degree of perceptual discrimination. However, the most commonly used colormaps contain a limited range of luminance contrast. ColorMoves enables interactive constructing colormaps enabling one to distribute the luminance where is it most needed. The interactive interface enables optimal placement of the color scales. The ability to watch the changes on ones data, in real time makes precision adjustment quick and easy. By enabling more precise placement and multiple ranges of luminance one can construct colomaps containing greater discriminatory power. By selecting from the wide range of color scale hues scientists can create colormaps intuitive to their subject. ColorMoves is comprised of four main components: a set of 40 color scales; a histogram of the data distribution; a viewing area showing the colormap on your data; and the controls section. The 40 color scales span the spectrum of hues, saturation levels and value distributions. The histogram of the data distribution enables placement of the color scales in precise locations. The viewing area show is the impact of changes on the data in real time. The controls section enables export

Effect of different polishing systems and drinks on the color stability of resin composite.

Science.gov (United States)

Berber, Asll; Cakir, Filiz Yalcin; Baseren, Meserret; Gurgan, Sevil

2013-07-01

The purpose of this study was to evaluate the color stability of resin composit using different finishing systems and drinks. Composit disks (5 mm diameter, 2 mm thickness) were prepared for each nanofilled composite using a brass mold. The specimens were divided into 5 finishing system groups Mylar strip (Mylar, DuPont, Wilmington, Del., USA), Soft Lex (3M(™) ESPE(™) St. Paul, MN, USA), Enhance (Dentsply-DeTrey GmbHD Konstanz, Germany), Hiluster (KerrHawe, Bioggio, Switzerland), Opti Disc (KerrHawe, Bioggio, Switzerland) and each group was divided into 10 subgroups (n = 10) and stored for 24 hours at 37°C in different drinks water coffee, coffee with sugar, tea, tea with sugar, diet coke, coke, light sour cherry juice or sour cherry juice. Color of all specimens was measured before and after exposure with a spectrophotometer using CIE L*a*b* relative, and color changes (ΔE*) were then calculated. The data were analyzed with a twoway analysis of variance (ANOVA), and mean values were compared by the Tukey HSD test (p = 0.05). For the drinks, the lowest ΔE* values were observed in the water and highest ΔE* values were observed in sour cherry juice. When drinks with and without sugar were compared, all groups with sugar demonstrated a higher color difference than without sugar. For the different finishing systems, Mylar strip group demonstrated significantly highest color change; Enhance groups demonstrated significantly lowest color change. Finishing treatments and storage solutions significantly affect the color stability of resin composite. The presence of sugar in drinks increased the color difference compared to drinks without composit. Polishing techniques and drinking drinks with sugar may affect the color of esthetic restorations.

A Multi-Addressable Dyad with Switchable CMY Colors for Full-Color Rewritable Papers.

Science.gov (United States)

Qin, Tianyou; Han, Jiaqi; Geng, Yue; Ju, Le; Sheng, Lan; Zhang, Sean Xiao-An

2018-06-23

Reversible multicolor displays on solid media using single molecule pigments have been a long-awaited goal. Herein, a new and simple molecular dyad, which can undergo switchable CMY color changes both in solution and solid substrate upon exposure to light, water/acid, and nucleophiles, is designed and synthesized. The stimuli used in this work can be applied independent of each other, which is beneficial for color changes without mutual interference. As a comparison, the mixtures of the two molecular switching motifs forming the basis of the dyad were also studied. The dyad greatly outperforms the corresponding mixed system with respect to reversible color-switching on the paper substrate. Its potential for full-color rewritable paper with excellent reversibility has been demonstrated. Legible multicolor prints, that is, high color contrast and resolution, good dispersion, excellent reversibility, were achieved using common water-jet and light-based printers. This work provides a very promising approach for further development of full-color switchable molecules, materials and displays. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Camouflage through colour change: mechanisms, adaptive value and ecological significance.

Science.gov (United States)

Duarte, Rafael C; Flores, Augusto A V; Stevens, Martin

2017-07-05

Animals from a wide range of taxonomic groups are capable of colour change, of which camouflage is one of the main functions. A considerable amount of past work on this subject has investigated species capable of extremely rapid colour change (in seconds). However, relatively slow colour change (over hours, days, weeks and months), as well as changes arising via developmental plasticity are probably more common than rapid changes, yet less studied. We discuss three key areas of colour change and camouflage. First, we review the mechanisms underpinning colour change and developmental plasticity for camouflage, including cellular processes, visual feedback, hormonal control and dietary factors. Second, we discuss the adaptive value of colour change for camouflage, including the use of different camouflage types. Third, we discuss the evolutionary-ecological implications of colour change for concealment, including what it can tell us about intraspecific colour diversity, morph-specific strategies, and matching to different environments and microhabitats. Throughout, we discuss key unresolved questions and present directions for future work, and highlight how colour change facilitates camouflage among habitats and arises when animals are faced with environmental changes occurring over a range of spatial and temporal scales.This article is part of the themed issue 'Animal coloration: production, perception, function and application'. © 2017 The Authors.

Color center formation in plutonium electrorefining residues

International Nuclear Information System (INIS)

Morris, D.E.; Eller, P.G.; Hobart, D.E.; Eastman, M.P.; McCurry, L.E.

1989-01-01

Plutonium electrorefining residues containing Pu(III) in KCl exhibit dramatic reversible, light-induced color changes. Similar color changes were observed in Ln-doped (Ln = La, Nd, Gd, and Lu) and undoped KCl samples which were subjected to intense gamma irradiation. Diffuse reflectance electronic and electron paramagnetic resonance spectroscopies were used to show conclusively that Pu(III) is present in both the bleached and unbleached plutonium-bearing residues and the spectacular color changes are the result of color center formation and alternation by visible light. (orig.)

Full Color Camouflage in a Printable Photonic Blue-Colored Polymer

OpenAIRE

Moirangthem, Monali; Schenning, Albertus P. H. J.

2018-01-01

A blue reflective photonic polymer coating which can be patterned in full color, from blue to red, by printing with an aqueous calcium nitrate solution has been fabricated. Color change in the cholesteric liquid-crystalline polymer network over the entire visible spectrum is obtained by the use of nonreactive mesogen. The pattern in the coating is hidden in the blue color dry state and appears upon exposure to water or by exhaling breath onto it due to different degrees of swelling of the pol...

Effect of various teas on color stability of resin composites.

Science.gov (United States)

Dinç Ata, Gül; Gokay, Osman; Müjdeci, Arzu; Kivrak, Tugba Congara; Mokhtari Tavana, Armin

2017-12-01

To investigate the effect of various teas on color stability of resin composites. Two methacrylate-based (Arabesk Top, Grandio) and a silorane-based (Filtek Silorane) resin composites were used. 110 cylindrical samples of each resin composite were prepared (2 mm thickness and 8 mm diameter), polished and stored in distilled water (37°C for 24 hours). They were randomly divided into 11 groups (n= 10) and color measurements were taken. Then the samples were immersed in tap water (control), a black tea, a green tea or one of the eight herbal-fruit teas (37°C for 1 week) and subsequently subjected to the final color measurements. The color change of samples (ΔE*) was calculated, data were subjected to two-way ANOVA and Tukey's HSD tests. Teas, resin composites and their interactions were significant (P= 0.000). All the teas and control caused color changes in all three resin composites. Rosehip tea caused the most color changes, while tap water showed the least in all resin composites. Arabesk Top had the most staining potential in all the teas and control, whereas Filtek Silorane was the most stain resistant except Grandio immersed in sage tea. Color stability of all resin composites used were affected from both structure of resin materials and constituents of teas used. All resin composites were susceptible to staining by all teas especially rosehip tea. Arabesk Top composite showed the greatest color susceptibility in all teas and Filtek Silorane the least with one exception. Color of resin composites can be negatively affected from teas consumed. Clinicians should advise patients that drinking different kind of teas could intensify surface staining of resin based restorations.

Color stability of microfilled, microhybrid and nanocomposite resins--an in vitro study.

Science.gov (United States)

Nasim, Iffat; Neelakantan, Prasanna; Sujeer, R; Subbarao, C V

2010-01-01

The aim of this study was to evaluate the effect of two beverages-Tea and Pepsi on the color stability of three different composite resins after a period of 7 and 30 days. Color stability of a microfilled, microhybrid and nanocomposite was evaluated after storage in Tea, a carbonated drink or Distilled Water for 7 and 30 days. Color measurement was done using reflectance spectrophotometer based on the CIE L*a*b* color scale. Mean values of the different groups were compared using three-way analysis of variance and multiple comparisons of the mean values were done using Tukey-Kramer test with 0.05 as significance level. All tested resin composites showed color change after a period of 7 and 30 days. The color change exhibited by all three groups was significantly different for all three beverages studied, at both time periods (pPepsi at the 7th and 30th day. The nanocomposite discolored most in Tea at 7th and 30th day. All efforts should be made to minimize discoloration of composite restorations by adopting excellent polishing techniques. Patients should also be educated on the possibility of the restoration to undergo staining under the influence of beverages. Copyright © 2010 Elsevier Ltd. All rights reserved.

When Did Coloring Books Become Mindful? Exploring the Effectiveness of a Novel Method of Mindfulness-Guided Instructions for Coloring Books to Increase Mindfulness and Decrease Anxiety

Directory of Open Access Journals (Sweden)

Michail Mantzios

2018-01-01

Full Text Available Mindfulness has been associated with the use of coloring books for adults; however, the question of whether they do increase mindfulness has not been addressed. In two studies, we attempted to identify whether mindfulness is increased, and whether there is a need for ongoing guidance while coloring, similar to mindfulness meditation. In the first randomized controlled experiment, university students (n = 88 were assigned to an unguided mandala coloring group (i.e., described in mainstream literature as a mindfulness practice or to a free-drawing group. Measurements of state mindfulness and state anxiety were taken pre- and post- experiment. Results indicated no change in mindfulness or anxiety. In the second randomized controlled experiment, university students (n = 72 were assigned to an unguided mandala coloring group (i.e., same as Experiment 1, or, to a mindfulness-guided coloring group (i.e., same as the unguided coloring group with a mindfulness practitioner guiding participants as in mindfulness breathing meditation, with instructions modified and applied to coloring. Results indicated that the mindfulness-guided mandala coloring group performed better in decreasing anxiety, but no change was observed in mindfulness. Exit interviews revealed that some participants did not like the voice guiding them while coloring, which suggested further differing and significant findings. While mindfulness-guided coloring appears promising, guidance or instructions on how to color mindfully may require further development and adjustment to enhance health and wellbeing.

Changes in color and odorant compounds during oxidative aging of Pedro Ximenez sweet wines.

Science.gov (United States)

Chaves, Margarita; Zea, Luis; Moyano, Lourdes; Medina, Manuel

2007-05-02

Pedro Ximenez sweet wines obtained following the typical criaderas and solera method for sherry wines and subjected to oxidative aging for 0, 1.3, 4.2, 7.0, or 11.5 years were studied in terms of color and aroma fraction by using the CIELab method and gas chromatography, respectively. The parameters defining the CIELab color space (a*, b*, and L*) were subjected to a multiple-range test (p 1 that enriched the wines with fruity, fatty, floral, and balsamic notes during the aging process. The changes in color parameters and active odorants were not linearly related to aging time, being especially marked during the first 1.3 years and then less substantial up to the 7 years, the oldest wines exhibiting sensorial properties markedly departing from all others. For the wines aged over 1.3 years (minimum aging), 2,3-butanedione, linalool, and decanal can be used as reliable fingerprints of the older wines' quality.

Synthesis of indolo[3,2-b]carbazole-based new colorimetric receptor for anions: A unique color change for fluoride ions

Directory of Open Access Journals (Sweden)

Ajit Kumar Mahapatra

2010-02-01

Full Text Available A novel indolocarbazole-based chemosensor 1 containing hydrogen bond donor moieties has been established as a selective colorimetric and fluorometric sensor for F− in CH3CN/H2O (4:1 v/v. Upon the addition of a series of tetrabutylammonium salts to receptor 1 in aqueous CH3CN, only when the counter ion was F− was a significant color change (from light violet to dark orange observed.

Effect of Weathering Time on the Physical - Mechanical Properties and Color Change in Wood Flour/HDPE Composite

Directory of Open Access Journals (Sweden)

Behzad Kord

2014-05-01

Full Text Available This study was carried out to investigate the effect of weathering time on the physical and mechanical properties and color change in composite made of wood flour and high density polyethylene (HDPE. For this purpose, wood flour and polyethylene at a weight ratio of 60:40 with coupling agent were compounded in an internal mixer, and the samples were made in injection molding. Then, the weathering process by ultraviolet irradiation and water spray was done on the samples at different times of 250, 500, 1000 and 2000 hours in accelerated weathering apparatus. Finally, the physical and mechanical properties and color measurement of samples were tested, and compared with control samples. Results indicated that the flexural strength, flexural modulus, tensile strength and tensile modulus decreased with an increase in weathering time; however, the water absorption increased. Also, the yellowness of wood plastic samples decreased with an increase in weathering time and due to the lightness and color change increased.

Color and Surface Chemistry Changes of Pine Wood Flour after Extraction and Delignification

Science.gov (United States)

Yao Chen; Mandla A. Tshabalala; Jianmin Gao; Nicole M. Stark; Yongming Fan

2014-01-01

A detailed study was undertaken to examine the color and chemistry changes of pine wood flour when its extractives are removed and when it is delignified. The solvent systems employed were toluene/ethanol (TE), acetone/water (AW), and hot-water (HW), while sodium chlorite/acetic acid were used for delignification (i.e., lignin removal (LR)). Samples were analyzed by...

Fear no colors? Observer clothing color influences lizard escape behavior.

Science.gov (United States)

Putman, Breanna J; Drury, Jonathan P; Blumstein, Daniel T; Pauly, Gregory B

2017-01-01

Animals often view humans as predators, leading to alterations in their behavior. Even nuanced aspects of human activity like clothing color affect animal behavior, but we lack an understanding of when and where such effects will occur. The species confidence hypothesis posits that birds are attracted to colors found on their bodies and repelled by non-body colors. Here, we extend this hypothesis taxonomically and conceptually to test whether this pattern is applicable in a non-avian reptile and to suggest that species should respond less fearfully to their sexually-selected signaling color. Responses to clothing color could also be impacted by habituation to humans, so we examine whether behavior varied between areas with low and high human activity. We quantified the effects of four T-shirt colors on flight initiation distances (FID) and on the ease of capture in western fence lizards (Sceloporus occidentalis), and we accounted for detectability against the background environment. We found no differences in lizard behavior between sites. However, lizards tolerated the closest approaches and were most likely to be captured when approached with the T-shirt that resembled their sexually-selected signaling color. Because changes in individual behavior affect fitness, choice of clothing color by people, including tourists, hikers, and researchers, could impact wildlife populations and research outcomes.

Experimental Investigation of Surface Color Changes in Vacuum Evaporation Process for Gold-like Stainless Steel

Directory of Open Access Journals (Sweden)

Yang Baojian

2016-01-01

Full Text Available In order to reduce the environmental pollution caused by the three wastes during the process of electroplating of gold-like film on stainless steel, in this paper, the "vacuum evaporation and annealing" composite technologies were adopted to evaporate gold-like film in 16 stainless steel 304 substrates, and electronic color cards and color software were also used for analyzing the color and luster of the gold-like film. Experiments shows that the negative pressure, annealing temperature and mass fraction of the double copper alloys have influence on preparation of imitation in assaying the fineness of gold film, the annealing temperature has significant effects on imitation in assaying the fineness of gold film.

Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces

CERN Document Server

American Society for Testing and Materials. Philadelphia

2001-01-01

1.1 This test method covers the determination of color change and staining from liquid solutions, such as cleaning or disinfecting chemicals or both, on painted metallic surfaces and nonmetallic surfaces of materials being used inside the aircraft cabin. The effects upon the exposed specimens are measured with the AATCC Gray Scale for Color Change and AATCC Gray Color Scale for Staining. Note 1—This test method is applicable to any colored nonmetallic hard surface in contact with liquids. The selected test specimens are chosen because these materials are present in the majority of aircraft cabin interiors. 1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Revisiting "Color Names and Color Notions": a contemporary examination of the language and attitudes of skin color among young black women.

Science.gov (United States)

Wilder, JeffriAnne

2010-01-01

Employing the pioneering work of Charles Parrish as a basis of comparison, this study serves as a follow-up to “Color Names and Color Notions” by deconstructing the contemporary language and attitudes surrounding skin color. Nine focus groups with 58 black women between the ages of 18 and 25 reveal that the color names and color notions offered were consistent with many of the terms and stereotypes that Parrish found, thereby indicating that there has been no change in colorist ideology among African Americans. Participants discussed 40 color names regularly employed to describe light, medium, and dark skin tones. The terms and attitudes associated with light skin tones were generally negative; conversely, the terms and attitudes associated with dark skin tones were derogatory. The language and beliefs connected to medium skin tones indicate that colorism operates as a three-tiered structure rather than the traditionally situated binary paradigm.

P1-15: Categorical Color Perception of LED Illuminant Color for Deuteranomals

Directory of Open Access Journals (Sweden)

Saeko Oishi

2012-10-01

Full Text Available Color information has great value in our everyday lives, but it is not mindful of people with color vision deficiency (CVD. We can choose several color names to categorize a lot of colors around us. Eleven color names (white, black, red, green, yellow, blue, brown, orange, pink, and gray are known as basic color categories, but people with CVD cannot necessarily describe colors as people who are color vision normal (CVN do. Previous studies showed that it was hard for people with CVD to discriminate illuminant color from object color, and their color perception changed largely depending on experimental conditions. In this study we investigated categorical color perception of illuminant color for deuteranomals, using a mixture of light which consists of a red, a green, and a blue LED as a test stimulus. We tested those stimuli with three luminance levels (180 cd/m2, 18 cd/m2, 1.8 cd/m2 and two visual angles (10 deg, 0.5 deg. Subjects were three deuteranomals and three people who are CVN. Our result showed that the categorical color of mild deuteranomals was similar to that of those who were CVN, but that of severe deuteranomals was not. Severe deuteranomals judged more low chromatic colors as achromatic colors than those who were CVN. The smaller visual angle or lower luminance level the test stimulus had, the more deuteranomals confused color. The results suggest that the effect of the Bezold-Brucke phenomenon is greater to deuteranomals than to those who are CVN. Furthermore, deuteranomals use not only chromatic information but also luminance information when they describe color.

Modeling human color categorization: Color discrimination and color memory

OpenAIRE

Heskes, T.; van den Broek, Egon; Lucas, P.; Hendriks, Maria A.; Vuurpijl, L.G.; Puts, M.J.H.; Wiegerinck, W.

2003-01-01

Color matching in Content-Based Image Retrieval is done using a color space and measuring distances between colors. Such an approach yields non-intuitive results for the user. We introduce color categories (or focal colors), determine that they are valid, and use them in two experiments. The experiments conducted prove the difference between color categorization by the cognitive processes color discrimination and color memory. In addition, they yield a Color Look-Up Table, which can improve c...

Future of color

Science.gov (United States)

Ladson, Jack A.; Turner, Laraine B.; Green-Armytage, Paul; Hunt, Robert W. G.

2002-06-01

We live in a world in which styles and technologies are nearly the same from place to place, but change daily. This changing global culture is unprecedented, and reinforced by emerging new technologies that affect us all. The Future of Color, examines new technologies, how they will affect the selection and promulgation of color in the near future, and their impact upon us. We examine this topic from many perspectives - technological, business and commercial. Most importantly, as we understand how our world is emerging, we can position ourselves strategically for tomorrow.

Comparison of the color stability of provisional restorative materials after storing in different drinks

Directory of Open Access Journals (Sweden)

Merve Bankoğlu Güngör

2016-05-01

Full Text Available OBJECTIVE: The objective of the present study was to compare the color stability of provisional restorative materials after stroring in different drinks. MATERIALS AND METHOD: Thirty specimens (10 mm in diameter and 2 mm in thickness were prepared from three different materials (Temdent, TRIAD ve TelioCAD. Specimens were divided into six groups according to drinks (distilled water, coffee, tea, cola, red wine and fruit juice; n=5. Specimens were stored in these drinks at 37 °C for 48 hours. The L*, a*, b* values of the specimens were measured with a spectrophometer and recorded before and after storing in drinks. Then ΔE* values were calculated. The data were statistically analyzed using two-way analysis of variance (ANOVA and Tukey’s HSD post hoc tests (α=0.05. RESULTS: Difference between the ΔE* values of specimens stored in different drinks was statistically significant (p<0.05. Color change of TelioCAD specimens was smallest in cola drink and greatest in red wine. Color change of Temdent specimens was smallest in fruit juice and greatest in coffee. For TRIAD specimens, greater color change was observed in coffee, red wine, and tea, in descending order. When the results of storing in the same drink were compared, TRIAD showed the greatest values of color change in coffee and red wine in comparison to the other provisional materials (p<0.05. CONCLUSION: Color stability changed according to the type of the provisional material and the drink. When the drinks were evaluated, greater color changes were observed in coffee, and when the materials were evaluated greater color changes were observed in TRIAD.

Irradiated beetroot extract as a colorant for cream cheese

Science.gov (United States)

Junqueira-Goncalves, Maria Paula; Cardoso, Lediana Pereira; Pinto, Michele Silva; Pereira, Rodrigo Magela; Soares, Nilda Ferreira; Miltz, Joseph

2011-01-01

A Brazilian ham-flavored cream cheese was developed using gamma-irradiated beetroot extract as the colorant. An irradiation dose of 5.0 kGy was used based on previous studies that indicated no growth of moulds, yeasts and aerobic psychotropic microorganisms during 12 days at 5 °C, and with no changes in the structure of the pigment. One part of the cheese was colored with the irradiated beetroot extract and the other part with carmine cochineal, which is a natural stable colorant but expensive and difficult to extract. Both portions were submitted to sensory evaluation with 67 panelists. No significant differences were found in flavor and overall appearance. The cream cheese containing carmine cochineal was slightly preferred in regards to color. However, being a new product, these results were encouraging and point towards the potential use of irradiated beetroot extract as a natural food colorant.

Irradiated beetroot extract as a colorant for cream cheese

Energy Technology Data Exchange (ETDEWEB)

Junqueira-Goncalves, Maria Paula, E-mail: mpaula.junqueira@usach.c [Universidad de Santiago de Chile, Department of Food Science and Technology, Ecuador 3769, Santiago (Chile); Cardoso, Lediana Pereira; Pinto, Michele Silva; Pereira, Rodrigo Magela; Soares, Nilda Ferreira [Universidade Federal de Vicosa, Department of Food Science and Technology, CEP 36570-000, Vicosa, MG (Brazil); Miltz, Joseph [Technion Israel Institute of Technology, Department of Biotechnology and Food Engineering, Haifa 32000 (Israel)

2011-01-15

A Brazilian ham-flavored cream cheese was developed using gamma-irradiated beetroot extract as the colorant. An irradiation dose of 5.0 kGy was used based on previous studies that indicated no growth of moulds, yeasts and aerobic psychotropic microorganisms during 12 days at 5 {sup o}C, and with no changes in the structure of the pigment. One part of the cheese was colored with the irradiated beetroot extract and the other part with carmine cochineal, which is a natural stable colorant but expensive and difficult to extract. Both portions were submitted to sensory evaluation with 67 panelists. No significant differences were found in flavor and overall appearance. The cream cheese containing carmine cochineal was slightly preferred in regards to color. However, being a new product, these results were encouraging and point towards the potential use of irradiated beetroot extract as a natural food colorant.

Irradiated beetroot extract as a colorant for cream cheese

International Nuclear Information System (INIS)

Junqueira-Goncalves, Maria Paula; Cardoso, Lediana Pereira; Pinto, Michele Silva; Pereira, Rodrigo Magela; Soares, Nilda Ferreira; Miltz, Joseph

2011-01-01

A Brazilian ham-flavored cream cheese was developed using gamma-irradiated beetroot extract as the colorant. An irradiation dose of 5.0 kGy was used based on previous studies that indicated no growth of moulds, yeasts and aerobic psychotropic microorganisms during 12 days at 5 o C, and with no changes in the structure of the pigment. One part of the cheese was colored with the irradiated beetroot extract and the other part with carmine cochineal, which is a natural stable colorant but expensive and difficult to extract. Both portions were submitted to sensory evaluation with 67 panelists. No significant differences were found in flavor and overall appearance. The cream cheese containing carmine cochineal was slightly preferred in regards to color. However, being a new product, these results were encouraging and point towards the potential use of irradiated beetroot extract as a natural food colorant.

Depth profile analysis of non-specific fluorescence and color of tooth tissues after peroxide bleaching.

Science.gov (United States)

Klukowska, Malgorzata; Götz, Hermann; White, Donald J; Zoladz, James; Schwarz, Björn-Olaf; Duschner, Heinz

2013-02-01

To examine laboratory changes of endogenous non-specific fluorescence and color throughout subsurface of tooth structures prior to and following peroxide bleaching. Extracted human teeth were cross sectioned and mounted on glass slides. Cross sections were examined for internal color (digital camera) and nonspecific fluorescence (microRaman spectroscopy) throughout the tooth structure at specified locations. Surfaces of sections were then saturation bleached for 70 hours with a gel containing 6% hydrogen peroxide. Cross sections were reexamined for color and non-specific fluorescence changes. Unbleached enamel, dentin-enamel junction and dentin exhibit different CIELab color and non-specific fluorescence properties. Bleaching of teeth produced significant changes in color of internal cross sections and substantial reductions of non-specific fluorescence levels within enamel dentin and DEJ. Enamel and dentin non-specific fluorescence were reduced to common values with bleaching with enamel and the DEJ showing larger reductions than dentin.

The Control of Single-color and Multiple-color Visual Search by Attentional Templates in Working Memory and in Long-term Memory.

Science.gov (United States)

Grubert, Anna; Carlisle, Nancy B; Eimer, Martin

2016-12-01

The question whether target selection in visual search can be effectively controlled by simultaneous attentional templates for multiple features is still under dispute. We investigated whether multiple-color attentional guidance is possible when target colors remain constant and can thus be represented in long-term memory but not when they change frequently and have to be held in working memory. Participants searched for one, two, or three possible target colors that were specified by cue displays at the start of each trial. In constant-color blocks, the same colors remained task-relevant throughout. In variable-color blocks, target colors changed between trials. The contralateral delay activity (CDA) to cue displays increased in amplitude as a function of color memory load in variable-color blocks, which indicates that cued target colors were held in working memory. In constant-color blocks, the CDA was much smaller, suggesting that color representations were primarily stored in long-term memory. N2pc components to targets were measured as a marker of attentional target selection. Target N2pcs were attenuated and delayed during multiple-color search, demonstrating less efficient attentional deployment to color-defined target objects relative to single-color search. Importantly, these costs were the same in constant-color and variable-color blocks. These results demonstrate that attentional guidance by multiple-feature as compared with single-feature templates is less efficient both when target features remain constant and can be represented in long-term memory and when they change across trials and therefore have to be maintained in working memory.

Fear no colors? Observer clothing color influences lizard escape behavior

Science.gov (United States)

Drury, Jonathan P.; Blumstein, Daniel T.; Pauly, Gregory B.

2017-01-01

Animals often view humans as predators, leading to alterations in their behavior. Even nuanced aspects of human activity like clothing color affect animal behavior, but we lack an understanding of when and where such effects will occur. The species confidence hypothesis posits that birds are attracted to colors found on their bodies and repelled by non-body colors. Here, we extend this hypothesis taxonomically and conceptually to test whether this pattern is applicable in a non-avian reptile and to suggest that species should respond less fearfully to their sexually-selected signaling color. Responses to clothing color could also be impacted by habituation to humans, so we examine whether behavior varied between areas with low and high human activity. We quantified the effects of four T-shirt colors on flight initiation distances (FID) and on the ease of capture in western fence lizards (Sceloporus occidentalis), and we accounted for detectability against the background environment. We found no differences in lizard behavior between sites. However, lizards tolerated the closest approaches and were most likely to be captured when approached with the T-shirt that resembled their sexually-selected signaling color. Because changes in individual behavior affect fitness, choice of clothing color by people, including tourists, hikers, and researchers, could impact wildlife populations and research outcomes. PMID:28792983

Fear no colors? Observer clothing color influences lizard escape behavior.

Directory of Open Access Journals (Sweden)

Breanna J Putman

Full Text Available Animals often view humans as predators, leading to alterations in their behavior. Even nuanced aspects of human activity like clothing color affect animal behavior, but we lack an understanding of when and where such effects will occur. The species confidence hypothesis posits that birds are attracted to colors found on their bodies and repelled by non-body colors. Here, we extend this hypothesis taxonomically and conceptually to test whether this pattern is applicable in a non-avian reptile and to suggest that species should respond less fearfully to their sexually-selected signaling color. Responses to clothing color could also be impacted by habituation to humans, so we examine whether behavior varied between areas with low and high human activity. We quantified the effects of four T-shirt colors on flight initiation distances (FID and on the ease of capture in western fence lizards (Sceloporus occidentalis, and we accounted for detectability against the background environment. We found no differences in lizard behavior between sites. However, lizards tolerated the closest approaches and were most likely to be captured when approached with the T-shirt that resembled their sexually-selected signaling color. Because changes in individual behavior affect fitness, choice of clothing color by people, including tourists, hikers, and researchers, could impact wildlife populations and research outcomes.

How to display data by color schemes compatible with red-green color perception deficiencies.

Science.gov (United States)

Geissbuehler, Matthias; Lasser, Theo

2013-04-22

Visualization of data concerns most scientists. The use of color is required in order to display multidimensional information. In addition, color encoding a univariate image can improve the interpretation significantly. However up to 10% of the adult male population are affected by a red-green color perception deficiency which hampers the correct interpretation and appreciation of color encoded information. This work attempts to give guidelines on how to display a given dataset in a balanced manner. Three novel color maps are proposed providing readers with normal color perception a maximum of color contrast while being a good compromise for readers with color perception deficiencies.

Colored Chaos

Science.gov (United States)

2004-01-01

[figure removed for brevity, see original site] Released 7 May 2004 This daytime visible color image was collected on May 30, 2002 during the Southern Fall season in Atlantis Chaos. The THEMIS VIS camera is capable of capturing color images of the martian surface using its five different color filters. In this mode of operation, the spatial resolution and coverage of the image must be reduced to accommodate the additional data volume produced from the use of multiple filters. To make a color image, three of the five filter images (each in grayscale) are selected. Each is contrast enhanced and then converted to a red, green, or blue intensity image. These three images are then combined to produce a full color, single image. Because the THEMIS color filters don't span the full range of colors seen by the human eye, a color THEMIS image does not represent true color. Also, because each single-filter image is contrast enhanced before inclusion in the three-color image, the apparent color variation of the scene is exaggerated. Nevertheless, the color variation that does appear is representative of some change in color, however subtle, in the actual scene. Note that the long edges of THEMIS color images typically contain color artifacts that do not represent surface variation. Image information: VIS instrument. Latitude -34.5, Longitude 183.6 East (176.4 West). 38 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D

Cool colored coating and phase change materials as complementary cooling strategies for building cooling load reduction in tropics

International Nuclear Information System (INIS)

Lei, Jiawei; Kumarasamy, Karthikeyan; Zingre, Kishor T.; Yang, Jinglei; Wan, Man Pun; Yang, En-Hua

2017-01-01

Highlights: • Cool colored coating and PCM are two complementary passive cooling strategies. • A PCM cool colored coating system is developed. • The coating reduces cooling energy by 8.5% and is effective yearly in tropical Singapore. - Abstract: Cool colored coating and phase change materials (PCM) are two passive cooling strategies often used separately in many studies and applications. This paper investigated the integration of cool colored coating and PCM for building cooling through experimental and numerical studies. Results showed that cool colored coating and PCM are two complementary passive cooling strategies that could be used concurrently in tropical climate where cool colored coating in the form of paint serves as the “first protection” to reflect solar radiation and a thin layer of PCM forms the “second protection” to absorb the conductive heat that cannot be handled by cool paint. Unlike other climate zones where PCM is only seasonally effective and cool paint is only beneficial during summer, the application of the proposed PCM cool colored coating in building envelope could be effective throughout the entire year with a monthly cooling energy saving ranging from 5 to 12% due to the uniform climatic condition all year round in tropical Singapore.

A Long-lived and Color Changing Oval on Jupiter's NTrZ (at 19ºN)

Science.gov (United States)

Barrado-Izagirre, N.; Legarreta, J.; Sanchez-Lavega, A.; Hueso, R.; Perez-Hoyos, S.; Rojas, J. F.; Mendikoa, I.

2015-12-01

A long lived oval located in the boundary between the North Tropical Zone and the North Equatorial Band (NEBn) of Jupiter at 19º of planetographic latitude is being observed at least since 2008. At this latitude the mean wind profile of the planet provide winds of around 10 m/s [1]. Since 2012 and using the PVOL image database of Jupiter (http://www.pvol.ehu.es/pvol/) we have tracked it observing and characterizing its changes. In this period of time, it has merged with another oval (in February 2013) and it has changed it color from white to red (in September 2013) and again white. We have also performed some EPIC simulations of the merger between both ovals. Thanks to Hubble Space Telescope data in Septembers 2012, we have also been able to measure its internal rotation while it was white, unfortunately this set of images only have observations in the near infrared (F763M) and in the ultraviolet (F275W). And finally, using HST and PlanetCam (a planetary camera developed in our research team) images, we are trying to measure the color and the altitude-opacity indexes [2] to assess the color change it has suffered. Acknowledgements: This work has been funded by the Spanish MICIIN proyect AYA2012-36666 with FEDER support, Grupos Gobierno Vasco IT765-13 and UPV/EHU UFI11/55. [1] García-Melendo & Sanchéz-Lavega., Icarus, 152, 136 (2001). [2] Sánchez-Lavega et al., JGR, 118, 1-21 (2013).

Color stability of shade guides after autoclave sterilization.

Science.gov (United States)

Schmeling, Max; Sartori, Neimar; Monteiro, Sylvio; Baratieri, Luiz

2014-01-01

This study evaluated the influence of 120 autoclave sterilization cycles on the color stability of two commercial shade guides (Vita Classical and Vita System 3D-Master). The specimens were evaluated by spectrophotometer before and after the sterilization cycles. The color was described using the three-dimensional CIELab system. The statistical analysis was performed in three chromaticity coordinates, before and after sterilization cycles, using the paired samples t test. All specimens became darker after autoclave sterilization cycles. However, specimens of Vita Classical became redder, while those of the Vita System 3D-Master became more yellow. Repeated cycles of autoclave sterilization caused statistically significant changes in the color coordinates of the two shade guides. However, these differences are considered clinically acceptable.

Color Stability of CAD/CAM Fabricated Inlays after Accelerated Artificial Aging.

Science.gov (United States)

Karaokutan, Isil; Yilmaz Savas, Tuba; Aykent, Filiz; Ozdere, Eda

2016-08-01

To investigate the influence of accelerated artificial aging on the color stability of three different inlay restorations produced with a CAD/CAM system. Thirty non-carious human mandibular molar teeth were used. The teeth were embedded in autopolymerizing acrylic resin blocks. Standard Class I inlay cavities were prepared, and the teeth were randomly divided into three groups (n = 10) to fabricate inlay restorations: (1) a feldspathic-ceramic group, (2) a resin nano-ceramic group, and (3) a leucite glass-ceramic group. Optical impressions were made with CEREC software, and the restorations were designed and then milled. The inlays were adhesively cemented with a dual-polymerizing resin cement and left in distilled water at room temperature for 1 week. Color measurements were performed with a spectrophotometer before and after accelerated aging in a weathering machine with a total energy of 150 kJ/m(2) . Changes in color (∆E, ∆L, ∆a, ∆b, ∆C) were determined using the CIE L*a*b* system. The results were assessed using a one-way ANOVA and Tukey's HSD test (p = 0.05). The color changes of the materials ranged from 2.1 to 9.29. The highest color change was seen in the resin nano-ceramic material. This change was not clinically acceptable (∆E > 5.5). No significant differences were found in the ∆L and ∆a values of the test groups. Color changes were observed in each evaluated material after accelerated aging. All CAD/CAM inlays became darker in appearance, more saturated, a little reddish, and more yellow. © 2015 by the American College of Prosthodontists.

Remote Sensing of Ocean Color

Science.gov (United States)

Dierssen, Heidi M.; Randolph, Kaylan

The oceans cover over 70% of the earth's surface and the life inhabiting the oceans play an important role in shaping the earth's climate. Phytoplankton, the microscopic organisms in the surface ocean, are responsible for half of the photosynthesis on the planet. These organisms at the base of the food web take up light and carbon dioxide and fix carbon into biological structures releasing oxygen. Estimating the amount of microscopic phytoplankton and their associated primary productivity over the vast expanses of the ocean is extremely challenging from ships. However, as phytoplankton take up light for photosynthesis, they change the color of the surface ocean from blue to green. Such shifts in ocean color can be measured from sensors placed high above the sea on satellites or aircraft and is called "ocean color remote sensing." In open ocean waters, the ocean color is predominantly driven by the phytoplankton concentration and ocean color remote sensing has been used to estimate the amount of chlorophyll a, the primary light-absorbing pigment in all phytoplankton. For the last few decades, satellite data have been used to estimate large-scale patterns of chlorophyll and to model primary productivity across the global ocean from daily to interannual timescales. Such global estimates of chlorophyll and primary productivity have been integrated into climate models and illustrate the important feedbacks between ocean life and global climate processes. In coastal and estuarine systems, ocean color is significantly influenced by other light-absorbing and light-scattering components besides phytoplankton. New approaches have been developed to evaluate the ocean color in relationship to colored dissolved organic matter, suspended sediments, and even to characterize the bathymetry and composition of the seafloor in optically shallow waters. Ocean color measurements are increasingly being used for environmental monitoring of harmful algal blooms, critical coastal habitats

Determining color difference thresholds in denture base acrylic resin.

Science.gov (United States)

Ren, Jiabao; Lin, Hong; Huang, Qingmei; Zheng, Gang

2015-11-01

In restorative prostheses, color is important, but the choice of color difference formula used to quantify color change in acrylic resins is not straightforward. The purpose of this in vitro study was to choose a color difference formula that best represented differences between the calculated color and the observed imperceptible to unacceptable color and to determine the corresponding perceptibility and acceptability threshold of color stability for denture base acrylic resins. A total of 291 acrylic resin denture base plates were fabricated and subjected to radiation tests from zero to 42 hours in accordance with ISO 7491:2000. Color was measured with a portable spectrophotometer, and color differences were calculated with 3 International Commission on Illumination (CIE) formulas: CIELab, CMC(1:1), and CIEDE2000. Thirty-four observers with no deficiencies in color perception participated in psychophysical perceptibility and acceptability assessments under controlled conditions in vitro. These 2 types of assessments were regressed to each observer by each formula to generate receiver operator characteristic (ROC) curves. Areas under the curves (AUCs) were then calculated and analyzed to exclude observers with poor color discrimination. AUCs were subjected to 1-way ANOVA (α=.05) to deter the statistical significance of discriminability among the 3 formulas in terms of perceptibility and acceptability judgments. Student-Newman-Keuls tests (α=.05) were used for post hoc comparison. CMC(1:1) and CIEDE2000 formulas performed better for imperceptible to unacceptable color differences, with corresponding CMC(1:1) and CIEDE2000 values for perceptibility of 2.52 and 1.72, respectively, and acceptability thresholds of 6.21 and 4.08, respectively. Formulas CMC(1:1) and CIEDE2000 possess higher discriminability than that of CIELab in the assessment of perceptible color difference threshold of denture base acrylic resin. A statistically significant difference exists

Heart rate variability changes during stroop color and word test among genders.

Science.gov (United States)

Satish, Priyanka; Muralikrishnan, Krishnan; Balasubramanian, Kabali; Shanmugapriya

2015-01-01

Stress is the reaction of the body to a change that requires physical, mental or emotional adjustments. Individual differences in stress reactivity are a potentially important risk factor for gender-specific health problems in men and women. The Autonomic regulation of the cardiovascular system is most commonly affected by stress and is assessed by means of short term heart rate variability (HRV).The present study was undertaken to investigate the difference in the cardiovascular Autonomic Nervous System response to mental stress between the genders using HRV as tool. We compared the mean RR interval, Blood pressure and indices of HRV during the StroopColor Word Test (SCWT).Twenty five male (Age 19.52±0.714, BMI 22.73±2 kg/m2) and twenty five female subjects (Age 19.80±0.65, BMI 22.39±1.9) performed SCWT for five minutes. Blood Pressure (SBP p<0.01, DBP p<0.042) & Mean HR (p<0.010) values showed statistically significant difference among the genders. HRV indices like LFms2 (p<0.051), HF nu (p<0.029) and LF/HF ratio (p<0.025, p<0.052) show statistically significant difference among the genders. The response by the cardiovascular system to a simple mental stressor exhibits difference among the genders.

Surface color perception under two illuminants: the second illuminant reduces color constancy

Science.gov (United States)

Yang, Joong Nam; Shevell, Steven K.

2003-01-01

This study investigates color perception in a scene with two different illuminants. The two illuminants, in opposite corners, simultaneously shine on a (simulated) scene with an opaque dividing wall, which controls how much of the scene is illuminated by each source. In the first experiment, the height of the dividing wall was varied. This changed the amount of each illuminant reaching objects on the opposite side of the wall. Results showed that the degree of color constancy decreased when a region on one side of the wall had cues to both illuminants, suggesting that cues from the second illuminant are detrimental to color constancy. In a later experiment, color constancy was found to improve when the specular highlight cues from the second illuminant were altered to be consistent with the first illuminant. This corroborates the influence of specular highlights in surface color perception, and suggests that the reduced color constancy in the first experiment is due to the inconsistent, though physically correct, cues from the two illuminants.

Hoopoes color their eggs with antimicrobial uropygial secretions

Science.gov (United States)

Soler, Juan J.; Martín-Vivaldi, M.; Peralta-Sánchez, J. M.; Arco, L.; Juárez-García-Pelayo, N.

2014-09-01

Uropygial gland secretions are used as cosmetics by some species of birds to color and enhance properties of feathers and teguments, which may signal individual quality. Uropygial secretions also reach eggshells during incubation and, therefore, may influence the coloration of birds' eggs, a trait that has attracted the attention of evolutionary biologists for more than one century. The color of hoopoe eggs typically changes along incubation, from bluish-gray to greenish-brown. Here, we test experimentally the hypothesis that dark uropygial secretion of females is responsible for such drastic color change. Moreover, since uropygial secretion of hoopoes has antimicrobial properties, we also explore the association between color and antimicrobial activity of the uropygial secretion of females. We found that eggs stayed bluish-gray in nests where female access to the uropygial secretion was experimentally blocked. Furthermore, experimental eggs that were maintained in incubators and manually smeared with uropygial secretion experienced similar color changes that naturally incubated eggs did, while control eggs that were not in contact with the secretions did not experience such color changes. All these results strongly support the hypothesis that female hoopoes use their uropygial gland secretion to color the eggs. Moreover, saturation of the uropygial secretion was associated with antimicrobial activity against Bacillus licheniformis. Given the known antimicrobial potential of uropygial secretions of birds, this finding opens the possibility that in scenarios of sexual selection, hoopoes in particular and birds in general signal antimicrobial properties of their uropygial secretion by mean of changes in egg coloration along incubation.

Data on internal cDNA amplification and color changes of the proteins derived from Pacific white leg shrimp shell.

Science.gov (United States)

Chuang, Pan; Shoichiro, Ishizaki; Yuji, Nagashima; Jialong, Gao; Shugo, Watabe

2018-02-01

In this article, we report original data on the designation of the primers for full-length cDNA amplification and the internal cDNA amplification of red color-related pigment-binding protein derived from shrimp shell. Data on the color shifts of different soluble proteins under 100 °C 10 min heat treatment and the effects of heating temperatures (from 30 to 100 °C) on the color changes of crude water-soluble proteins are also included in this report. For further details and experimental findings please refer to the article "Isolation and cDNA cloning of a novel red color-related pigment-binding protein derived from the shell of shrimp, Litopenaeus vannamei " (Chuang et al., 2017) [1].

Data on internal cDNA amplification and color changes of the proteins derived from Pacific white leg shrimp shell

Directory of Open Access Journals (Sweden)

Pan Chuang

2018-02-01

Full Text Available In this article, we report original data on the designation of the primers for full-length cDNA amplification and the internal cDNA amplification of red color-related pigment-binding protein derived from shrimp shell. Data on the color shifts of different soluble proteins under 100 °C 10 min heat treatment and the effects of heating temperatures (from 30 to 100 °C on the color changes of crude water-soluble proteins are also included in this report. For further details and experimental findings please refer to the article “Isolation and cDNA cloning of a novel red color-related pigment-binding protein derived from the shell of shrimp, Litopenaeus vannamei” (Chuang et al., 2017 [1].

Changes in White college students' color-blind racial ideology over 4 years: do diversity experiences make a difference?

Science.gov (United States)

Neville, Helen A; Poteat, V Paul; Lewis, Jioni A; Spanierman, Lisa B

2014-04-01

In this longitudinal study, we explored how White students' (N = 857) color-blind racial ideology (CBRI; i.e., beliefs that serve to deny, minimize, and/or distort the existence of racism) changed over time and the factors associated with these patterns of change. Specifically, we investigated whether gender, diversity attitudes (i.e., openness to diversity and interest in social issues), and college diversity experiences (i.e., diversity-related courses/activities and close interracial friendships) predicted patterns of CBRI change. Findings indicated that gender and diversity attitudes were related to initial levels of CBRI, such that women and students who were more open to diversity issues at the beginning of college were more likely to report lower levels of CBRI; gender was also related to a greater decrease in CBRI changes over the college experience. Furthermore, college diversity experiences predicted changes in CBRI over time, such that students who completed a greater number of diversity courses and activities and those who had a greater number of close Black friends showed a significantly greater decrease in CBRI over their 4 years in college; interestingly, students who reported having no Latino friends compared with having some close Latino friends showed a significantly greater decrease in CBRI over time. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

Managing of the baking bread process based on mathematical model of change crust color dynamics

Directory of Open Access Journals (Sweden)

V. K. Bitjukov

2013-01-01

Full Text Available In this article a support system of making decision about control of baking process of bread on the basis of estimating the quality ( the colors of the product surface and the mathematical model of the dynamics of change in this indicator is offered.

Proteomics approach reveals mechanism underlying susceptibility of loquat fruit to sunburn during color changing period.

Science.gov (United States)

Jiang, Ji-Mou; Lin, Yong-Xiang; Chen, Yi-Yong; Deng, Chao-Jun; Gong, Hui-Wen; Xu, Qi-Zhi; Zheng, Shao-Quan; Chen, Wei

2015-06-01

The objective of this work was to investigate why loquat fruit peels are more sensitive to high temperature and strong sunlight, making them highly susceptible to sunburn, during the color changing period (CCP). Two dimensional gel electrophoresis (2-DE) of the fruit peel proteins was performed over three developmental periods, namely green fruit period (GFP), color changing period and yellow ripening period (YRP). Fifty-five protein spots with at least 2-fold differences in abundance were successfully identified by MALDI-TOF-TOF/MS. The identified proteins were divided into categories related to heat-shock response, stress response and defense, energy metabolism, photosynthesis and protein biosynthesis. The results showed that expression of proteins related to anaerobic respiration and photorespiration were increased while the proteins related to ROS scavenging, polyamine biosynthesis, defense pathogens and photosynthesis were decreased during CCP under heat stress. Our findings provide new insights into the molecular mechanism of loquat fruit susceptible to sunburn during CCP. Copyright © 2014 Elsevier Ltd. All rights reserved.

Wood Colorization through Pressure Treating: The Potential of Extracted Colorants from Spalting Fungi as a Replacement for Woodworkers’ Aniline Dyes

Directory of Open Access Journals (Sweden)

Sara C. Robinson

2014-07-01

Full Text Available The extracellular colorants produced by Chlorociboria aeruginosa, Scytalidium cuboideum, and Scytalidium ganodermophthorum, three commonly utilized spalting fungi, were tested against a standard woodworker’s aniline dye to determine if the fungal colorants could be utilized in an effort to find a naturally occurring replacement for the synthetic dye. Fungal colorants were delivered in two methods within a pressure treater—the first through solubilization of extracted colorants in dichloromethane, and the second via liquid culture consisting of water, malt, and the actively growing fungus. Visual external evaluation of the wood test blocks showed complete surface coloration of all wood species with all colorants, with the exception of the green colorant (xylindein from C. aeruginosa in liquid culture, which did not produce a visible surface color change. The highest changes in external color came from noble fir, lodgepole pine, port orford cedar and sugar maple with aniline dye, cottonwood with the yellow colorant in liquid culture, lodgepole pine with the red colorant in liquid culture, red alder and Oregon maple with the green colorant in dichloromethane, and sugar maple and port orford cedar with the yellow colorant in dichloromethane. The aniline dye was superior to the fungal colorants in terms of internal coloration, although none of the tested compounds were able to completely visually color the inside of the test blocks.

Modeling human color categorization: Color discrimination and color memory

NARCIS (Netherlands)

Heskes, T.; van den Broek, Egon; Lucas, P.; Hendriks, Maria A.; Vuurpijl, L.G.; Puts, M.J.H.; Wiegerinck, W.

2003-01-01

Color matching in Content-Based Image Retrieval is done using a color space and measuring distances between colors. Such an approach yields non-intuitive results for the user. We introduce color categories (or focal colors), determine that they are valid, and use them in two experiments. The

Image color reduction method for color-defective observers using a color palette composed of 20 particular colors

Science.gov (United States)

Sakamoto, Takashi

2015-01-01

This study describes a color enhancement method that uses a color palette especially designed for protan and deutan defects, commonly known as red-green color blindness. The proposed color reduction method is based on a simple color mapping. Complicated computation and image processing are not required by using the proposed method, and the method can replace protan and deutan confusion (p/d-confusion) colors with protan and deutan safe (p/d-safe) colors. Color palettes for protan and deutan defects proposed by previous studies are composed of few p/d-safe colors. Thus, the colors contained in these palettes are insufficient for replacing colors in photographs. Recently, Ito et al. proposed a p/dsafe color palette composed of 20 particular colors. The author demonstrated that their p/d-safe color palette could be applied to image color reduction in photographs as a means to replace p/d-confusion colors. This study describes the results of the proposed color reduction in photographs that include typical p/d-confusion colors, which can be replaced. After the reduction process is completed, color-defective observers can distinguish these confusion colors.

Effect of fluoride varnishes on color stability of esthetic restorative materials.

Science.gov (United States)

Autio-Gold, Jaana T; Barrett, Allyson A

2004-01-01

Fluoride varnish applications were applied to two hybrid resin composite materials, Z-100 (3M Dental Products, St Paul, MN, USA) and Esthet-X (Dentsply Caulk, Milford, DE, USA), shades A1 and A2 and a glass ionomer, GC Fuji IX GP Fast (GC Corporation, Tokyo, Japan), shade A2, to evaluate color stability. Specimens (12.6-mm dia x 2.3 mm) were prepared using a polyethylene frame, light-cured and polished through a 1-microm alumina finish. After the initial baseline color measurements, the discs were suspended in Fusayama artificial saliva (FAS) solution at 37 degrees C for 48 hours. Post immersion, the specimens were divided into five groups (n=15 each). The following fluoride varnishes were applied to four groups of test specimens: Duraphat (Colgate Oral Pharmaceutical, Inc, Canton MA, USA), Cavity Shield (OMNII Oral Pharmaceuticals, West Palm Beach, FL, USA), Duraflor (Pharmascience Inc, Montreal, Canada) and Fluor Protector (Vivadent, Ivoclar North America, Amherst, NY, USA). The varnish was allowed to dry for five minutes before immersion. The control group was not coated with varnish, although the specimens were immersed in FAS. All specimens were incubated in newly prepared FAS at 37 degrees C for 24 hours, cleaned with an electric toothbrush and the process repeated using newly prepared FAS. CIE L*a*b* color measurements were recorded five times: at baseline, after 48 hours FAS immersion, after cleaning the first and second fluoride varnish applications and after the final brushing using a commercial toothpaste (Crest). A Minolta CR-300 tristimulus colorimeter with an 8-mm aperture (Ramsey, NJ, USA) was used to record color measurements with the daylight (D65) setting. Calculations were performed for using CIE parameters deltaE*, deltaL*, delta a*, delta b*. Analysis of variance (ANOVA) and post-hoc test (Fisher's PLSD) were used for statistical analysis. After immersion in saliva, the tested glass ionomer (Fuji IX) produced the most significant color changes

Role of wing color and seasonal changes in ambient temperature and solar irradiation on predicted flight efficiency of the Albatross.

Science.gov (United States)

Hassanalian, M; Throneberry, G; Ali, M; Ben Ayed, S; Abdelkefi, A

2018-01-01

Drag reduction of the wings of migrating birds is crucial to their flight efficiency. Wing color impacts absorption of solar irradiation which may affect drag but there is little known in this area. To this end, the drag reduction induced by the thermal effect of the wing color of migrating birds with unpowered flight modes is presented in this study. Considering this natural phenomenon in the albatross as an example of migrating birds, and applying an energy balance for this biological system, a thermal analysis is performed on the wings during the summer and winter to obtain different ranges of air density, viscosity, and wing surface temperature brought about from a range of ambient temperatures and climatic conditions seen in different seasons and to study their effects. The exact shape of the albatross wing is used and nine different wing colors are considered in order to gain a better understanding of the effect different colors' absorptivities make on the change in aerodynamic performances. The thermal effect is found to be more important during the summer than during the winter due to the higher values of solar irradiation and a maximum drag reduction of 7.8% is found in summer changing the wing color from light white to dark black. The obtained results show that albatrosses with darker colored wings are more efficient (constant lift to drag ratio and drag reduction) and have better endurance due to this drag reduction. Copyright © 2017 Elsevier Ltd. All rights reserved.

Color record in self-monitoring of blood glucose improves glycemic control by better self-management.

Science.gov (United States)

Nishimura, Akiko; Harashima, Shin-ichi; Honda, Ikumi; Shimizu, Yoshiyuki; Harada, Norio; Nagashima, Kazuaki; Hamasaki, Akihiro; Hosoda, Kiminori; Inagaki, Nobuya

2014-07-01

Color affects emotions, feelings, and behaviors. We hypothesized that color used in self-monitoring of blood glucose (SMBG) is helpful for patients to recognize and act on their glucose levels to improve glycemic control. Here, two color-indication methods, color record (CR) and color display (CD), were independently compared for their effects on glycemic control in less frequently insulin-treated type 2 diabetes. One hundred twenty outpatients were randomly allocated to four groups with 2×2 factorial design: CR or non-CR and CD or non-CD. Blood glucose levels were recorded in red or blue pencil in the CR arm, and a red or blue indicator light on the SMBG meter was lit in the CD arm, under hyperglycemia or hypoglycemia, respectively. The primary end point was difference in glycated hemoglobin (HbA1c) reduction in 24 weeks. Secondary end points were self-management performance change and psychological state change. HbA1c levels at 24 weeks were significantly decreased in the CR arm by -0.28% but were increased by 0.03% in the non-CR arm (P=0.044). In addition, diet and exercise scores were significantly improved in the CR arm compared with the non-CR arm. The exercise score showed significant improvement in the CD arm compared with the non-CD arm but without a significant difference in HbA1c reduction. Changes in psychological states were not altered between the arms. CR has a favorable effect on self-management performance without any influence on psychological stress, resulting in improved glycemic control in type 2 diabetes patients using less frequent insulin injection. Thus, active but not passive usage of color-indication methods by patients is important in successful SMBG.

Effect of different solutions on color stability of acrylic resin-based dentures

Directory of Open Access Journals (Sweden)

Marcelo Coelho Goiato

2014-01-01

Full Text Available The aim of this study was to evaluate the effect of thermocycling and immersion in mouthwash or beverage solutions on the color stability of four different acrylic resin-based dentures (Onda Cryl, OC; QC20, QC; Classico, CL; and Lucitone, LU. The factors evaluated were type of acrylic resin, immersion time, and solution (mouthwash or beverage. A total of 224 denture samples were fabricated. For each type of resin, eight samples were immersed in mouthwashes (Plax-Colgate, PC; Listerine, LI; and Oral-B, OB, beverages (coffee, CP; cola, C; and wine, W, and artificial saliva (AS; control. The color change (DE was evaluated before (baseline and after thermocycling (T1, and after immersion in solution for 1 h (T2, 3 h (T3, 24 h (T4, 48 h (T5, and 96 h (T6. The CIE Lab system was used to determine the color changes. The thermocycling test was performed for 5000 cycles. Data were submitted to three-way repeated-measures analysis of variance and Tukey's test (p < 0.05. When the samples were immersed in each mouthwash, all assessed factors, associated or not, significantly influenced the color change values, except there was no association between the mouthwash and acrylic resin. Similarly, when the samples were immersed in each beverage, all studied factors influenced the color change values. In general, regardless of the solution, LU exhibited the greatest DE values in the period from T1 to T5; and QC presented the greatest DE values at T6. Thus, thermocycling and immersion in the various solutions influenced the color stability of acrylic resins and QC showed the greatest color alteration.

Effect of different solutions on color stability of acrylic resin-based dentures.

Science.gov (United States)

Goiato, Marcelo Coelho; Nóbrega, Adhara Smith; dos Santos, Daniela Micheline; Andreotti, Agda Marobo; Moreno, Amália

2014-01-01

The aim of this study was to evaluate the effect of thermocycling and immersion in mouthwash or beverage solutions on the color stability of four different acrylic resin-based dentures (Onda Cryl, OC; QC20, QC; Classico, CL; and Lucitone, LU). The factors evaluated were type of acrylic resin, immersion time, and solution (mouthwash or beverage). A total of 224 denture samples were fabricated. For each type of resin, eight samples were immersed in mouthwashes (Plax-Colgate, PC; Listerine, LI; and Oral-B, OB), beverages (coffee, CP; cola, C; and wine, W), and artificial saliva (AS; control). The color change (DE) was evaluated before (baseline) and after thermocycling (T1), and after immersion in solution for 1 h (T2), 3 h (T3), 24 h (T4), 48 h (T5), and 96 h (T6). The CIE Lab system was used to determine the color changes. The thermocycling test was performed for 5000 cycles. Data were submitted to three-way repeated-measures analysis of variance and Tukey's test (p<0.05). When the samples were immersed in each mouthwash, all assessed factors, associated or not, significantly influenced the color change values, except there was no association between the mouthwash and acrylic resin. Similarly, when the samples were immersed in each beverage, all studied factors influenced the color change values. In general, regardless of the solution, LU exhibited the greatest DE values in the period from T1 to T5; and QC presented the greatest DE values at T6. Thus, thermocycling and immersion in the various solutions influenced the color stability of acrylic resins and QC showed the greatest color alteration.

Harnessing color vision for visual oximetry in central cyanosis.

Science.gov (United States)

Changizi, Mark; Rio, Kevin

2010-01-01

Central cyanosis refers to a bluish discoloration of the skin, lips, tongue, nails, and mucous membranes, and is due to poor arterial oxygenation. Although skin color is one of its characteristic properties, it has long been realized that by the time skin color signs become visible, oxygen saturation is dangerously low. Here we investigate the visibility of cyanosis in light of recent discoveries on what color vision evolved for in primates. We elucidate why low arterial oxygenation is visible at all, why it is perceived as blue, and why it can be so difficult to perceive. With a better understanding of the relationship between color vision and blood physiology, we suggest two simple techniques for greatly enhancing the clinician's ability to detect cyanosis and other clinical color changes. The first is called "skin-tone adaptation", wherein sheets, gowns, walls and other materials near a patient have a color close to that of the patient's skin, thereby optimizing a color-normal viewer's ability to sense skin color modulations. The second technique is called "biosensor color tabs", wherein adhesive tabs with a color matching the patient's skin tone are placed in several spots on the skin, and subsequent skin color changes have the effect of making the initially-invisible tabs change color, their hue and saturation indicating the direction and magnitude of the skin color shift.

The change in color matches with retinal angle of incidence of the colorimeter beams.

Science.gov (United States)

Alpern, M; Kitahara, H; Fielder, G H

1987-01-01

Differences between W.D.W. chromaticities of monochromatic lights obtained with all colorimeter beams incident on the retina "off-axis" and those found for lights striking the retina normally have been studied throughout the visible spectrum on 4 normal trichromats. The results are inconsistent with: (i) the assumption in Weale's theories of the Stiles-Crawford hue shift that the sets of absorption spectra of the visual pigments catching normally and obliquely incident photons are identical, and (ii) "self-screening" explanations for the change in color with angle of incidence on the retina. The color matching functions of a protanomalous trichromat are inconsistent with the hypothesis that the absorption spectra of the visual pigments catching normally incident photons in his retina are those catching obliquely incident photons in the normal retina.

The dynamics of color signals in male threespine sticklebacks Gasterosteus aculeatus.

Science.gov (United States)

Hiermes, Meike; Rick, Ingolf P; Mehlis, Marion; Bakker, Theo C M

2016-02-01

Body coloration and color patterns are ubiquitous throughout the animal kingdom and vary between and within species. Recent studies have dealt with individual dynamics of various aspects of coloration, as it is in many cases a flexible trait and changes in color expression may be context-dependent. During the reproductive phase, temporal changes of coloration in the visible spectral range (400-700 nm) have been shown for many animals but corresponding changes in the ultraviolet (UV) waveband (300-400 nm) have rarely been studied. Threespine stickleback Gasterosteus aculeatus males develop conspicuous orange-red breeding coloration combined with UV reflectance in the cheek region. We investigated dynamics of color patterns including UV throughout a male breeding cycle, as well as short-term changes in coloration in response to a computer-animated rival using reflectance spectrophotometry and visual modeling, to estimate how colors would be perceived by conspecifics. We found the orange-red component of coloration to vary during the breeding cycle with respect to hue ( theta /R50) and intensity (achieved chroma/red chroma). Furthermore, color intensity in the orange-red spectral part (achieved chroma) tended to be increased after the presentation of an artificial rival. Dynamic changes in specific measures of hue and intensity in the UV waveband were not found. In general, the orange-red component of the signal seems to be dynamic with respect to color intensity and hue. This accounts in particular for color changes during the breeding cycle, presumably to signal reproductive status, and with limitations as well in the intrasexual context, most likely to signal dominance or inferiority.

Enhancing the color gamut of white displays using novel deep-blue organic fluorescent dyes to form color-changed thin films with improved efficiency

Science.gov (United States)

Liu, Wei-Ting; Huang, Wen-Yao

2012-10-01

This study used the novel fluorescence based deep-blue-emitting molecule BPVPDA in an organic fluorescent color thin film to exhibit deep blue color with CIE coordinates of (0.13, 0.16). The developed original organic RGB color thin film technology enables the optimization of the distinctive features of an organic light emitting diode (OLED) and thin-film-transistor (TFT) LCD display. The color filter structure maintains the same high resolution to obtain a higher level of brightness in comparison with conventional organic RGB color thin film. The image-processing engine is designed to achieve a sharp text image for a TFT LCD with organic color thin films. The organic color thin films structure uses an organic dye dopant in a limpid photoresist. With this technology, the following characteristics can be obtained: 1. high color reproduction of gamut ratio, and 2. improved luminous efficiency with organic color fluorescent thin film. This performance is among the best results ever reported for a color-filter used on TFT-LCD or OLED.

Coloring of Topaz After Irradiation

International Nuclear Information System (INIS)

Salama, S.; Helal, A.I.; Gomaa, M.A.M.; Abou-Salem, L.I.; Nafie, H.; Badawi, E.A.

2011-01-01

Raw topaz stone samples are subjected to irradiation by neutrons from the Egyptian research reactor and by γ rays from a gamma source. Changes in the color of the stones are observed which can be attributed to the formation of defects in the structure of the stones. The defects can absorb certain wave length which is observed as a change in the stone color .The absorption of light is investigated by an optical spectrophotometer technique at different irradiation and heating conditions. Raman studies of topaz stones showed a relation between the color changes with changes in the intensities of the band of scattered peaks corresponding to OH group stretching modes of vibration.Positron Annihilation Spectroscopy (PAS) technique is used to study the behavior of defect concentration in topaz in two states; pure and irradiated stones by neutrons and γ. It has been shown that positrons are trapped in imperfect locations in topaz samples and their mean lifetime can be influenced by changes in the concentration of such defects.

How to display data by color schemes compatible with red-green color perception deficiencies

OpenAIRE

Geissbuehler, Matthias; Lasser, Theo

2013-01-01

Visualization of data concerns most scientists. The use of color is required in order to display multidimensional information. In addition, color encoding a univariate image can improve the interpretation significantly. However up to 10% of the adult male population are affected by a red-green color perception deficiency which hampers the correct interpretation and appreciation of color encoded information. This work attempts to give guidelines on how to display a given dataset in a balanced ...

Color-Changing Microfiber-Based Multifunctional Window Screen for Capture and Visualized Monitoring of NH3.

Science.gov (United States)

Wang, Zhen; Yuan, Xinxin; Cong, Shan; Chen, Zhigang; Li, Qingwen; Geng, Fengxia; Zhao, Zhigang

2018-05-02

Air pollution is one of the most serious issues affecting the world today. Instead of expensive and energy-intensive air filtering devices, a fiber-based transparent air filter coated on a window screen is seen as one of the state-of-the-art filtration technologies to combat the seriously growing problem, delivering the advantages of simplicity, convenience, and high filtering efficiency. However, such a window screen is currently limited to particulate matter (PM) filtration and ineffective with other air pollutants. Here, we report the use of a newfangled type of color-changing fibers, porous Prussian blue analogues (CuHCF)/polymer composite microfibers, for transparent window screens toward air pollutant filtration. To increase pollution filtration, pores and dimples are purposely introduced to the fibers using binary solvent systems through a nonsolvent-induced phase separation mechanism. Such composite microfibers overcome some of the limitations of those previously used fibers and could simultaneously capture PM 2.5 , PM 10 , and NH 3 with high efficiency. More interestingly, a distinct color change is observed upon exposure to air pollutants in such window screens, which provides multifunctional capability of simultaneous pollutant capture and naked eye screening of the pollutant amount. Specifically, in the case of long-term exposure to low-concentration NH 3 , the symbol displayed in such window screens changes from yellow color to brown and the coloration rate is directly controlled by the NH 3 concentration, which may serve as a careful reminder for those people who are repeatedly exposed to low-concentration ammonia gas (referred to as chronic poisoning). In contrast, after short-term exposure to a high concentration of ammonia gas, the yellow symbol immediately becomes blackened, which provides timely information about the risk of acute ammonia poisoning or even ammonia explosion. Further spectroscopic results show that the chromatic behaviors in

Lipid Oxidation, Color Changes, and Microbiological Quality of Frozen Beef Burgers Incorporated with Shirazi Thyme, Cinnamon, and Rosemary Extracts

Directory of Open Access Journals (Sweden)

Hadi Hashemi Gahruie

2017-01-01

Full Text Available In this study, the oxidative stability of beef burgers incorporated with Shirazi thyme, cinnamon, and rosemary extracts was compared with that of BHT-incorporated and antioxidant-free samples. The chemical composition, TBARS, metmyoglobin, pH, color, and microbial and sensory characteristics were evaluated during storage at −18°C for 2 months. The results indicated that Shirazi thyme and cinnamon extracts did not change the colorimetric properties significantly (P BHT > Shirazi thyme > rosemary > control. Finally, the results showed that these plant extracts can be utilized as an alternative to synthetic antioxidants in formulation of burgers.

Reflectance, illumination, and appearance in color constancy.

Science.gov (United States)

McCann, John J; Parraman, Carinna; Rizzi, Alessandro

2014-01-01

We studied color constancy using a pair of identical 3-D Color Mondrian displays. We viewed one 3-D Mondrian in nearly uniform illumination, and the other in directional, nonuniform illumination. We used the three dimensional structures to modulate the light falling on the painted surfaces. The 3-D structures in the displays were a matching set of wooden blocks. Across Mondrian displays, each corresponding facet had the same paint on its surface. We used only 6 chromatic, and 5 achromatic paints applied to 104 block facets. The 3-D blocks add shadows and multiple reflections not found in flat Mondrians. Both 3-D Mondrians were viewed simultaneously, side-by-side. We used two techniques to measure correlation of appearance with surface reflectance. First, observers made magnitude estimates of changes in the appearances of identical reflectances. Second, an author painted a watercolor of the 3-D Mondrians. The watercolor's reflectances quantified the changes in appearances. While constancy generalizations about illumination and reflectance hold for flat Mondrians, they do not for 3-D Mondrians. A constant paint does not exhibit perfect color constancy, but rather shows significant shifts in lightness, hue and chroma in response to the structure in the nonuniform illumination. Color appearance depends on the spatial information in both the illumination and the reflectances of objects. The spatial information of the quanta catch from the array of retinal receptors generates sensations that have variable correlation with surface reflectance. Models of appearance in humans need to calculate the departures from perfect constancy measured here. This article provides a dataset of measurements of color appearances for computational models of sensation.

Reflectance, illumination, and appearance in color constancy

Directory of Open Access Journals (Sweden)

John J. McCann

2014-01-01

Full Text Available We studied color constancy using a pair of identical 3-D Color Mondrian displays. We viewed one 3-D Mondrian in nearly uniform illumination, and the other in directional, nonuniform illumination. We used the three dimensional structures to modulate the light falling on the painted surfaces. The 3-D structures in the displays were a matching set of wooden blocks. Across Mondrian displays, each corresponding facet had the same paint on its surface. We used only 6 chromatic, and 5 achromatic paints applied to 104 block facets. The 3-D blocks add shadows and multiple reflections not found in flat Mondrians. Both 3-D Mondrians were viewed simultaneously, side-by-side. We used two techniques to measure correlation of appearance with surface reflectance. First, observers made magnitude estimates of changes in the appearances of identical reflectances. Second, an author painted a watercolor of the 3-D Mondrians. The watercolor’s reflectances quantified the changes in appearances. While constancy generalizations about illumination and reflectance hold for flat Mondrians, they do not for 3-D Mondrians. A constant paint does not exhibit perfect color constancy, but rather shows significant shifts in lightness, hue and chroma in response to the structure in the nonuniform illumination. Color appearance depends on the spatial information in both the illumination and the reflectances of objects. The spatial information of the quanta catch from the array of retinal receptors generates sensations that have variable correlation with surface reflectance. Models of appearance in humans need to calculate the departures from perfect constancy measured here. This article provides a dataset of measurements of color appearances for computational models of sensation.

Tuning the Colors of the Dark Isomers of Photochromic Boron Compounds with Fluoride Ions: Four-State Color Switching.

Science.gov (United States)

Mellerup, Soren K; Rao, Ying-Li; Amarne, Hazem; Wang, Suning

2016-09-02

Combining a three-coordinated boron (BMes2) moiety with a four-coordinated photochromic organoboron unit leads to a series of new diboron compounds that undergo four-state reversible color switching in response to stimuli of light, heat, and fluoride ions. Thus, these hybrid diboron systems allow both convenient color tuning/switching of such photochromic systems, as well as visual fluoride sensing by color or fluorescent emission color change.

Using color and grayscale images to teach histology to color-deficient medical students.

Science.gov (United States)

Rubin, Lindsay R; Lackey, Wendy L; Kennedy, Frances A; Stephenson, Robert B

2009-01-01

Examination of histologic and histopathologic microscopic sections relies upon differential colors provided by staining techniques, such as hematoxylin and eosin, to delineate normal tissue components and to identify pathologic alterations in these components. Given the prevalence of color deficiency (commonly called "color blindness") in the general population, it is likely that this reliance upon color differentiation poses a significant obstacle for several medical students beginning a course of study that includes examination of histologic slides. In the past, first-year medical students at Michigan State University who identified themselves as color deficient were encouraged to use color transparency overlays or tinted contact lenses to filter out problematic colors. Recently, however, we have offered such students a computer monitor adjusted to grayscale for in-lab work, as well as grayscale copies of color photomicrographs for examination purposes. Grayscale images emphasize the texture of tissues and the contrasts between tissues as the students learn histologic architecture. Using this approach, color-deficient students have quickly learned to compensate for their deficiency by focusing on cell and tissue structure rather than on color variation. Based upon our experience with color-deficient students, we believe that grayscale photomicrographs may also prove instructional for students with normal (trichromatic) color vision, by encouraging them to consider structural characteristics of cells and tissues that may otherwise be overshadowed by stain colors.

Can color changes alter the neural correlates of recognition memory? Manipulation of processing affects an electrophysiological indicator of conceptual implicit memory.

Science.gov (United States)

Cui, Xiaoyu; Gao, Chuanji; Zhou, Jianshe; Guo, Chunyan

2016-09-28

It has been widely shown that recognition memory includes two distinct retrieval processes: familiarity and recollection. Many studies have shown that recognition memory can be facilitated when there is a perceptual match between the studied and the tested items. Most event-related potential studies have explored the perceptual match effect on familiarity on the basis of the hypothesis that the specific event-related potential component associated with familiarity is the FN400 (300-500 ms mid-frontal effect). However, it is currently unclear whether the FN400 indexes familiarity or conceptual implicit memory. In addition, on the basis of the findings of a previous study, the so-called perceptual manipulations in previous studies may also involve some conceptual alterations. Therefore, we sought to determine the influence of perceptual manipulation by color changes on recognition memory when the perceptual or the conceptual processes were emphasized. Specifically, different instructions (perceptually or conceptually oriented) were provided to the participants. The results showed that color changes may significantly affect overall recognition memory behaviorally and that congruent items were recognized with a higher accuracy rate than incongruent items in both tasks, but no corresponding neural changes were found. Despite the evident familiarity shown in the two tasks (the behavioral performance of recognition memory was much higher than at the chance level), the FN400 effect was found in conceptually oriented tasks, but not perceptually oriented tasks. It is thus highly interesting that the FN400 effect was not induced, although color manipulation of recognition memory was behaviorally shown, as seen in previous studies. Our findings of the FN400 effect for the conceptual but not perceptual condition support the explanation that the FN400 effect indexes conceptual implicit memory.

Tuning the color point of a white LED

NARCIS (Netherlands)

Adhikary, Manashee; Meretska, Maryna; Ladovrechis, K.; Fokkema, Wouter K.; Vissenberg, Gilles; Lagendijk, Ad; Ijzerman, W.L.; Vos, Willem L.

2018-01-01

White light is conveniently characterized by a color point that is represented on the color space. Color point of white LED is fixed by the design parameters (e.g. Phosphor type and concentration). When the design parameters are chosen, the color point of the white LED cannot be changed. Here, we

The Manchester Color Wheel: validation in secondary school pupils.

Science.gov (United States)

Carruthers, Helen R; Magee, Linda; Osborne, Susan; Hall, Linda K; Whorwell, Peter J

2012-09-05

As part of our research programme into facilitating improved ways of communicating with patients, especially about more sensitive clinical issues, we have been investigating whether there are any non-verbal methods that might aid this process. One such approach is to ask patients to choose a color in response to a particular question, for instance about health or psychological status, and for this purpose we developed the Manchester Color Wheel (MCW). This instrument consists of positive, neutral and negative colors and its validation in normal adults and those with anxiety or depression showed that it is responsive to change and reproducible. It also has the capacity to identify a positive frame of mind. We concluded that it might be a particularly useful instrument in adolescents and therefore this study aimed to validate it in a secondary school. 620 pupils (aged 11-17 years, mean age 14.0 years, 298 (48.1%) males, 322 (51.9%) females) at Sale Grammar School in Greater Manchester were asked to relate their mood to a MCW color and also complete the Hospital Anxiety Depression (HAD) questionnaire. To give these pupils an experience in science, 197 were divided into four subgroups for an 'experiment' to ascertain whether, compared to controls, a change in mood color choice could be induced by participation in sport, music or art activities. Although mood color and HAD depression score are unlikely to be measuring exactly the same psychological state, a negative mood color was chosen by 62.5% of HAD depressed compared to only 14.5% of HAD normal pupils (p color was chosen by 48.9% of normal and only 18.8% of depressed pupils (p colors which reached significance for sport and music. This study confirms the potential utility of the MCW to rapidly and easily assess a variety of health issues in large populations, including adolescents. Some of our results should also be of interest to educationalists.

Laser-evoked coloration in polymers

International Nuclear Information System (INIS)

Zheng, H.Y.; Rosseinsky, David; Lim, G.C.

2005-01-01

Laser-evoked coloration in polymers has long been a major aim of polymer technology for potential applications in product surface decoration, marking personalised images and logos. However, the coloration results reported so far were mostly attributed to laser-induced thermal-chemical reactions. The laser-irradiated areas are characterized with grooves due to material removal. Furthermore, only single color was laser-induced in any given polymer matrix. To induce multiple colors in a given polymer matrix with no apparent surface material removal is most desirable and challenging and may be achieved through laser-induced photo-chemical reactions. However, little public information is available at present. We report that two colors of red and green have been produced on an initially transparent CPV/PVA samples through UV laser-induced photo-chemical reactions. This is believed the first observation of laser-induced multiple-colors in the given polymer matrix. It is believed that the colorants underwent photo-effected electron transfer with suitable electron donors from the polymers to change from colorless bipyridilium Bipm 2+ to the colored Bipm + species. The discovery may lead to new approaches to the development of laser-evoked multiple coloration in polymers

Synesthesia induced colors do not bias attention in the same manner as physical colors do

DEFF Research Database (Denmark)

Sørensen, Thomas Alrik; Ásgeirsson, Árni Gunnar

2015-01-01

and performance in visual search, much like physical stimulus features. It has been demonstrated that the content of visual memory can guide attention (e.g. Carlisle & Woodman, 2011). This effect can be measured in the response time costs or benefits related to the presence of memorized color in a visual search......Grapheme-color synesthesia affects visual cognition in significant ways. The congruence or incongruence of physical stimuli with synesthetic color affects how quickly and accurately synesthetes respond to stimuli, and the induced color experience may help them memorize achromatic material...... display. Retaining color information in memory biases attention towards that specific color in visual search, apparent by response time costs when a matching distractor is present, but a benefit when the target matches the retained color. We investigated whether a synesthetic color is automatically...

H I-SELECTED GALAXIES IN THE SLOAN DIGITAL SKY SURVEY. II. THE COLORS OF GAS-RICH GALAXIES

International Nuclear Information System (INIS)

West, Andrew A.; Garcia-Appadoo, Diego A.; Dalcanton, Julianne J.; Ivezic, Zeljko; Disney, Mike J.; Rockosi, Constance M.

2009-01-01

We utilize color information for an H I-selected sample of 195 galaxies to explore the star formation histories and physical conditions that produce the observed colors. We show that the H I selection creates a significant offset toward bluer colors that can be explained by enhanced recent bursts of star formation. There is also no obvious color bimodality, because the H I selection restricts the sample to bluer, actively star-forming systems, diminishing the importance of the red sequence. Rising star formation rates are still required to explain the colors of galaxies bluer than g - r< 0.3. We also demonstrate that the colors of the bluest galaxies in our sample are dominated by emission lines and that stellar population synthesis models alone (without emission lines) are not adequate for reproducing many of the galaxy colors. These emission lines produce large changes in the r - i colors but leave the g - r color largely unchanged. In addition, we find an increase in the dispersion of galaxy colors at low masses that may be the result of a change in the star formation process in low-mass galaxies.

Processing of Color Words Activates Color Representations

Science.gov (United States)

Richter, Tobias; Zwaan, Rolf A.

2009-01-01

Two experiments were conducted to investigate whether color representations are routinely activated when color words are processed. Congruency effects of colors and color words were observed in both directions. Lexical decisions on color words were faster when preceding colors matched the color named by the word. Color-discrimination responses…

Daytime Changes of Skin Biophysical Characteristics: A Study of Hydration, Transepidermal Water Loss, pH, Sebum, Elasticity, Erythema, and Color Index on Middle Eastern Skin.

Science.gov (United States)

Firooz, Alireza; Zartab, Hamed; Sadr, Bardia; Bagherpour, Leili Naraghi; Masoudi, Aidin; Fanian, Ferial; Dowlati, Yahya; Ehsani, Amir Hooshang; Samadi, Aniseh

2016-01-01

The exposure of skin to ultraviolet radiation and temperature differs significantly during the day. It is reasonable that biophysical parameters of human skin have periodic daily fluctuation. The objective of this study was to study the fluctuations of various biophysical characteristics of Middle Eastern skin in standardized experimental conditions. Seven biophysical parameters of skin including stratum corneum hydration, transepidermal water loss, pH, sebum, elasticity, skin color, and erythema index were measured at three time points (8 a.m., 12 p.m. and 4 p.m.) on the forearm of 12 healthy participants (mean age of 28.4 years) without any ongoing skin disease using the CK MPA 580 device in standard temperature and humidity conditions. A significant difference was observed between means of skin color index at 8 a.m. (175.42 ± 13.92) and 4 p.m. (164.44 ± 13.72, P = 0.025), between the pH at 8 a.m. (5.72 ± 0.48) and 4 p.m. (5.33 ± 0.55, P = 0.001) and pH at 12 p.m. (5.60 ± 0.48) and 4 p.m. (5.33 ± 0.55, P = 0.001). Other comparisons between the means of these parameters at different time points resulted in nonsignificant P values. There are daytime changes in skin color index and pH. Skin color index might be higher and cutaneous pH more basic in the early morning compared to later of the day.

Effects of 15% carbamide peroxide and 40% hydrogen peroxide on the microhardness and color change of composite resins.

Directory of Open Access Journals (Sweden)

Sedighe Sadat Hashemi Kamangar

2014-04-01

Full Text Available The aim of this study was to determine the effects of 40% hydrogen peroxide and 15% carbamide peroxide on microhardness and color change of a silorane-based composite resin in comparison with two methacrylate-based composites.Fifty-four disc-shaped specimens (A3 shade were fabricated of Filtek P90 (P90, Filtek Z350XT Enamel (Z350 and Filtek Z250 (Z250 (3MESPE (n=18. The samples of each composite were randomly divided into three subgroups of 6. The control subgroups were immersed in distilled water; the test groups were exposed to Opalescence Boost (OB once; and Opalescence PF (OP (Ultradent for two weeks. Vickers microhardness testing and a spectrophotometric analysis of the color of samples were performed before and after each intervention.The baseline microhardness of P90 was significantly lower than that of the other two composites (P=0.001, but no difference was found between Z250 and Z350 in this respect (P=0.293. Bleaching treatments significantly decreased the microhardness of Z250 and Z350 (P 0.05. No significant difference was detected between the two types of bleaching (P>0.05. After bleaching with OB, ΔE value was measured to be 3.12(1.97, 3.31(1.84 and 3.7(2.11 for P90, Z250 and Z350, respectively. These values were 5.98(2.42, 4.66(2.85 and 4.90(2.78 after bleaching with OP with no significant difference.Bleaching decreased the microhardness of methacrylate-based but not silorane-based composites. Although no significant differences were found in ΔE of composites, ΔE of all groups did not remain in the clinically acceptable range after bleaching except for P90 after bleaching with 40% H2O2 (ΔE < 3.3.

Color Vision Defects in School Going Children

Directory of Open Access Journals (Sweden)

R K Shrestha

2010-12-01

Full Text Available Introduction: Color Vision defect can be observed in various diseases of optic nerve and retina and also a significant number of people suffer from the inherited condition of red and green color defect. Methods: A cross-sectional descritptive study was designed with purposive sampling of students from various schools of Kathmandu Valley. All children were subjected to color vision evaluation using Ishihara Isochromatic color plates along with other examination to rule out any other causes of color deficiency. Results: A total of 2001 students were examined, 1050 male students and 951 females with mean age of 10.35 (±2.75 and 10.54 (±2.72 respectively. Among the total students examined, 2.1% had some form of color vision defects. Of the male population , 3.9% had color vision defects while none of the female was found with the deficiency. Conclusions: The prelevance of color vision defect in Nepal is significant and comparable with the prelevance quoted in the studies from different countries. Keywords:color vision; congenital red green color effect; Nepal; prevalence.

Daytime changes of skin biophysical characteristics: A study of hydration, transepidermal water loss, ph, sebum, elasticity, erythema, and color index on middle eastern skin

Directory of Open Access Journals (Sweden)

Alireza Firooz

2016-01-01

Full Text Available Background: The exposure of skin to ultraviolet radiation and temperature differs significantly during the day. It is reasonable that biophysical parameters of human skin have periodic daily fluctuation. The objective of this study was to study the fluctuations of various biophysical characteristics of Middle Eastern skin in standardized experimental conditions. Materials and Methods: Seven biophysical parameters of skin including stratum corneum hydration, transepidermal water loss, pH, sebum, elasticity, skin color, and erythema index were measured at three time points (8 a.m., 12 p.m. and 4 p.m. on the forearm of 12 healthy participants (mean age of 28.4 years without any ongoing skin disease using the CK MPA 580 device in standard temperature and humidity conditions. Results: A significant difference was observed between means of skin color index at 8 a.m. (175.42 ± 13.92 and 4 p.m. (164.44 ± 13.72, P = 0.025, between the pH at 8 a.m. (5.72 ± 0.48 and 4 p.m. (5.33 ± 0.55, P = 0.001 and pH at 12 p.m. (5.60 ± 0.48 and 4 p.m. (5.33 ± 0.55, P = 0.001. Other comparisons between the means of these parameters at different time points resulted in nonsignificant P values. Conclusion: There are daytime changes in skin color index and pH. Skin color index might be higher and cutaneous pH more basic in the early morning compared to later of the day.

Preferred skin color enhancement for photographic color reproduction

Science.gov (United States)

Zeng, Huanzhao; Luo, Ronnier

2011-01-01

Skin tones are the most important colors among the memory color category. Reproducing skin colors pleasingly is an important factor in photographic color reproduction. Moving skin colors toward their preferred skin color center improves the color preference of skin color reproduction. Several methods to morph skin colors to a smaller preferred skin color region has been reported in the past. In this paper, a new approach is proposed to further improve the result of skin color enhancement. An ellipsoid skin color model is applied to compute skin color probabilities for skin color detection and to determine a weight for skin color adjustment. Preferred skin color centers determined through psychophysical experiments were applied for color adjustment. Preferred skin color centers for dark, medium, and light skin colors are applied to adjust skin colors differently. Skin colors are morphed toward their preferred color centers. A special processing is applied to avoid contrast loss in highlight. A 3-D interpolation method is applied to fix a potential contouring problem and to improve color processing efficiency. An psychophysical experiment validates that the method of preferred skin color enhancement effectively identifies skin colors, improves the skin color preference, and does not objectionably affect preferred skin colors in original images.

NONLINEAR COLOR-METALLICITY RELATIONS OF GLOBULAR CLUSTERS. II. A TEST ON THE NONLINEARITY SCENARIO FOR COLOR BIMODALITY USING THE u-BAND COLORS: THE CASE OF M87 (NGC 4486)

International Nuclear Information System (INIS)

Yoon, Suk-Jin; Lee, Sang-Yoon; Kim, Hak-Sub; Cho, Jaeil; Chung, Chul; Sohn, Sangmo T.; Blakeslee, John P.

2011-01-01

The optical color distributions of globular clusters (GCs) in most large elliptical galaxies are bimodal. Based on the assumed linear relationship between GC colors and their metallicities, the bimodality has been taken as evidence of two GC subsystems with different metallicities in each galaxy and has led to a number of theories in the context of galaxy formation. More recent observations and modeling of GCs, however, suggests that the color-metallicity relations (CMRs) are inflected, and thus colors likely trace metallicities in a nonlinear manner. The nonlinearity could produce bimodal color distributions from a broad underlying metallicity spread, even if it is unimodal. Despite the far-reaching implications, whether CMRs are nonlinear and whether the nonlinearity indeed causes the color bimodality are still open questions. Given that the spectroscopic refinement of CMRs is still very challenging, we here propose a new photometric technique to probe the possible nonlinear nature of CMRs. In essence, a color distribution of GCs is a 'projected' distribution of their metallicities. Since the form of CMRs hinges on which color is used, the shape of color distributions varies depending significantly on the colors. Among other optical colors, the u-band related colors (e.g., u – g and u – z) are theoretically predicted to exhibit significantly less inflected CMRs than other preferred CMRs (e.g., for g – z). As a case study, we performed the Hubble Space Telescope (HST)/WFPC2 archival u-band photometry for the M87 (NGC 4486) GC system with confirmed color bimodality. We show that the u-band color distributions are significantly different from that of g – z and consistent with our model predictions. With more u-band measurements, this method will support or rule out the nonlinear CMR scenario for the origin of GC color bimodality with high confidence. The HST/WFC3 observations in F336W for nearby large elliptical galaxies are highly anticipated in this regard.

On the characteristics of color film dosimeter

International Nuclear Information System (INIS)

Ohnishi, Tokuhiro; Hiraoka, Eiichi; Furuta, Junichiro

1978-01-01

Practical applicability of dosimetric color films available as Nitto Radocolor in commerce have been examined. The characteristics for dosimetry were studied using gamma-rays from Co-60 sources. The films can be stored without any deterioration unless they are exposed directly to sunlight or ultraviolet light. The dosage is easily estimated by comparing the irradiation-changed color of the film with a given standardized color chart. The dosage can be determined within an accuracy of 40% by the use of the printed color chart (Color Standard) supplied Nitto Co. and within an accuracy of 20% by the use of a color chart with color films which has been prepared by the present study. (auth.)

For fashion and health (coloring of gems)

International Nuclear Information System (INIS)

Umeda, Iwao

1998-01-01

Artificial coloration of colorless jewel grade diamonds can be made by fast neutron irradiation using a research reactor or high energy electron beam bombardment by a linear accelerator. The irradiated color diamonds are from blue to green. After irradiation, the blue-green diamonds change color to yellow or orange by subsequent annealing using an electric furnace. The colored diamond hue depends on the treatment conditions. Fancy hue can be produced under some suitable conditions. Some special absorption bands in the spectrum obtained by a spectrophotometer can discriminate artificially colored diamonds from natural fancy color diamonds. Diamonds become to be radioactive immediately after irradiation by a reactor, but the radioactivity decay rapidly and become safe after a month. Some imported gems without diamond as blue topaz etc. are sometimes discovered to be radioactive artificially. Cultured pearls are covered by 0.4 mm thick nacreous layer on the pearl nucleus made of fresh-water unionidae thick shell. White pearls turn color to silver by 60 Co γ-ray irradiation. The pearl nucleus contained Mn turns color to brown by irradiation and absorbs red light from reflection on the surface, whereas the nacreous layer is little color change by irradiation because of small quantity of Mn and remains the luster. White pearls turn beautiful blue-silver of like natural color pearls seemingly, by γ-ray irradiation in suitable solution. Cubic zirconia made from ZrO 2 is a man-made colorless crystal looked like a diamond. The crystals turn color to orange by irradiation. (J.P.N)

Different effects of color-based and location-based selection on visual working memory.

Science.gov (United States)

Li, Qi; Saiki, Jun

2015-02-01

In the present study, we investigated how feature- and location-based selection influences visual working memory (VWM) encoding and maintenance. In Experiment 1, cue type (color, location) and cue timing (precue, retro-cue) were manipulated in a change detection task. The stimuli were color-location conjunction objects, and binding memory was tested. We found a significantly greater effect for color precues than for either color retro-cues or location precues, but no difference between location pre- and retro-cues, consistent with previous studies (e.g., Griffin & Nobre in Journal of Cognitive Neuroscience, 15, 1176-1194, 2003). We also found no difference between location and color retro-cues. Experiment 2 replicated the color precue advantage with more complex color-shape-location conjunction objects. Only one retro-cue effect was different from that in Experiment 1: Color retro-cues were significantly less effective than location retro-cues in Experiment 2, which may relate to a structural property of multidimensional VWM representations. In Experiment 3, a visual search task was used, and the result of a greater location than color precue effect suggests that the color precue advantage in a memory task is related to the modulation of VWM encoding rather than of sensation and perception. Experiment 4, using a task that required only memory for individual features but not for feature bindings, further confirmed that the color precue advantage is specific to binding memory. Together, these findings reveal new aspects of the interaction between attention and VWM and provide potentially important implications for the structural properties of VWM representations.

Relationship between hemodynamic changes of portal vein and hepatic artery measured by color Doppler ultrasound and FibroScan value in patients with liver cirrhosis

Directory of Open Access Journals (Sweden)

CHENG Xiaofei

2014-11-01

Full Text Available ObjectiveTo explore the relationship between hemodynamic changes of the portal vein and hepatic artery measured by color Doppler ultrasound and FibroScan value in patients with liver cirrhosis. MethodsA total of 192 patients with hepatitis B cirrhosis who were admitted to our hospital from March 2010 to December 2013, as well as 100 healthy persons, were recruited. The mean portal vein blood flow velocity (PVVmean, hepatic artery pulsatility index (HAPI, and hepatic artery resistance index (HARI were measured by color Doppler ultrasound. FibroScan was also carried out. All data were statistically analyzed using SPSS 13.0. Continuous data were expressed as mean±SD and compared between groups by t-test. ResultsThe HAPI, HARI, and FibroScan value of the patient group were 1.56±024, 0.73±0.05, and 25.38±7.73, respectively, significantly higher than those of the control group (1.36±0.14, 0.65±0.07, and 7.8±3.6 (P＜0.05; the PVVmean of the patient group was 14.43±1.86, significantly lower than that of the control group (17.35±0.56 (P＜0.05. FibroScan value was positively correlated with HAPI and HARI (r1=0.59, r2=0.66, P＜0.001, but negatively correlated with PVVmean (r=-0.64, P＜0.001. ConclusionThe liver stiffness assessed by FibroScan and the hemodynamic changes of the portal vein and hepatic artery measured by color Doppler ultrasound are vitally important for evaluating the severity of liver cirrhosis.

Formation of radiation images using photographic color film

International Nuclear Information System (INIS)

Kuge, Ken'ichi; Kobayashi, Takaharu; Hasegawa, Akira; Yasuda, Nakahiro; Kumagai, Hiroshi

2001-01-01

A new method to reveal the three-dimensional information of nuclear tracks in a nuclear emulsion layer was developed by the use of color photography. The tracks were represented with a color image in which different depths were indicated by different colors, and the three-dimensional information was obtained from color changes. We present the procedure for a self-made photographic coating and the development formula that can represent the color tracks clearly. (author)

Bold colors in a cryptic lineage: do Eastern Indigo Snakes exhibit color dimorphism?

Science.gov (United States)

Deitloff, Jennifer; Johnson, Valerie M; Guyer, Craig

2013-01-01

Many species exhibit variation in the color of their scales, feathers, or fur. Various forms of natural selection, such as mimicry, crypsis, and species recognition, as well as sexual selection, can influence the evolution of color. Eastern Indigo Snakes (Drymarchon couperi), a federally threatened species, have coloration on the sides of the head and the chin that can vary from black to red or cream. Despite significant conservations efforts for this species, little is known about its biology in the field. Past researchers have proposed that the color variation on the head and chin is associated with the sex of the individual. Alternatively, color might vary among individuals because it is controlled by genes that are under natural selection or neutral evolution. We tested these alternative hypotheses by examining whether coloration of the sublabial, submaxillary, and ventral scales of this species differed by sex or among clutches. We used color spectrometry to characterize important aspects of color in two ways: by examining overall color differences across the entire color spectrum and by comparing differences within the ultraviolet, yellow, and red colorbands. We found that Eastern Indigo Snakes do not exhibit sexual dichromatism, but their coloration does vary among clutches; therefore, the pattern of sexual selection leading to sexual dichromatism observed in many squamates does not appear to play a role in the evolution and maintenance of color variation in Eastern Indigo Snakes. We suggest that future studies should focus on determining whether color variation in these snakes is determined by maternal effects or genetic components and if color is influenced by natural selection or neutral evolutionary processes. Studying species that exhibit bright colors within lineages that are not known for such coloration will contribute greatly to our understanding of the evolutionary and ecological factors that drive these differences.

Coevolution of coloration and colour vision?

Science.gov (United States)

Lind, Olle; Henze, Miriam J; Kelber, Almut; Osorio, Daniel

2017-07-05

The evolutionary relationship between signals and animal senses has broad significance, with potential consequences for speciation, and for the efficacy and honesty of biological communication. Here we outline current understanding of the diversity of colour vision in two contrasting groups: the phylogenetically conservative birds, and the more variable butterflies. Evidence for coevolution of colour signals and vision exists in both groups, but is limited to observations of phenotypic differences between visual systems, which might be correlated with coloration. Here, to illustrate how one might interpret the evolutionary significance of such differences, we used colour vision modelling based on an avian eye to evaluate the effects of variation in three key characters: photoreceptor spectral sensitivity, oil droplet pigmentation and the proportions of different photoreceptor types. The models predict that physiologically realistic changes in any one character will have little effect, but complementary shifts in all three can substantially affect discriminability of three types of natural spectra. These observations about the adaptive landscape of colour vision may help to explain the general conservatism of photoreceptor spectral sensitivities in birds. This approach can be extended to other types of eye and spectra to inform future work on coevolution of coloration and colour vision.This article is part of the themed issue 'Animal coloration: production, perception, function and application'. © 2017 The Author(s).

A comparative study of the effect of low laser radiation on mast cells in inflammatory fibrous hyperplasia colored and not colored by the toluidine blue

International Nuclear Information System (INIS)

Sawazaki, Iris

2001-01-01

THIS STUDY SHOWS A COMPARATIVE ANALYSIS OF THE EFFECTS OF THE LASER RADIATION IN LOW INTENSITY ON THE MAST CELL DEGRANULATION IN INFLAMMATORY FIBROUS HYPERPLASIA WHEN THEY ARE COLORED OR NOT BY THE TOLUIDINE BLUE. THE DYE WAS USED IN ORDER TO INCREASE THE ABSORPTION OF THE LASER LIGHT BY THE TISSUE. THE INJURE WAS DIVIDED IN THREE EQUAL PARTS, AND EACH PART RECEIVED A DIFFERENT KIND OF TREATMENT. ONE OF THEM WAS REMOVED TO BE THE CONTROL, THE SECOND PART WAS LASER TREATED AND THEN IMMEDIATELY REMOVED AND THE LAST ONE, AFTER BEING SUPERFICIALLY COLORED, WAS LASER TREATED AND THEN IMMEDIATELY REMOVED . THE ORDER OF THE STAGES WAS RANDOMLY CHANGED , THEN THE TIME BETWEEN THE STAGES WOULD NOT INTERFERE IN THE STATISTICAL ANALYSIS OF THE MAST CELL DEGRANULATION RATES. IT WAS FOUND THAT THE MAST CELL DEGRANULATION RATES WERE 49% FOR THE CONTROL GROUP, 87% FOR THE LASER GROUP AND 88% FOR THE COLORED/LASER GROUP. THERE WAS NO SIGNIFICANT STATISTICAL DIFFERENCES BETWEEN THE GROUP LASER TREATED AND THE ONE COLORED/LASER TREATED. HOWEVER, THERE WAS A SIGNIFICANT DIFFERENCE BETWEEN THE CONTROL AND THE TREATED GROUP (PS ≤ 0,01). (AUTHOR)

Geometric morphometric analysis of cyclical body shape changes in color pattern variants of Cichla temensis Humboldt, 1821 (Perciformes: Cichlidae demonstrates reproductive energy allocation

Directory of Open Access Journals (Sweden)

Paul Reiss

Full Text Available Previously recognized color and pattern variants of adult Cichla temensis in Amazon flood pulse river environments reflect the cycling of individuals through seasonal sexual maturity and spawning. Individuals also vary in shape from blocky to fusiform. To determine if shape differences are related to patterns of fat reserve deposition and utilization, and to quantify the relationship of shape with color and pattern variation and life history status, specimens in each of four previously defined grades of color and pattern variation were compared using geometric morphometric techniques. Progressive shape changes occurred between grades independent of sex and correlated to gonosomatic index (GSI. Thin plate spline deformation visualizations indicate that the observed shape differences are related to fat deposition patterns. The seasonal timing of shape change and its link to color pattern variation, sexual maturity and local water level conditions suggests a relationship between the physiological and behavioral characteristics of C. temensis and the cyclical flood pulse pattern of its habitat.

Effects of adhesive used as modeling liquid on the stability of the color and opacity of composites.

Science.gov (United States)

Araujo, Fernanda Santos; Barros, Mellany Cristie Ramos; Santana, Márcia Luciana Carregosa; de Jesus Oliveira, Ludmila Smith; Silva, Paula Fernanda Damasceno; Lima, Giana da Silveira; Faria-E-Silva, André Luis

2018-04-01

This study evaluated the effects of adhesive type used as modeling liquid on the stability of the color and opacity of composites submitted to thermal cycling in staining solutions followed by a bleaching procedure. Thirty cylinder-shaped composite specimens (10 mm diameter × 1.5 mm thickness) were built using or not using (control) an adhesive (Adper Universal or Scotchbond Multipurpose) as the modeling liquid. After polishing procedures, the color and opacity were measured, and the specimens were submitted to 200 thermal cycles with 10 s of dwell time in baths of grape juice at 5°C, water at 37°C, and coffee at 55°C. Changes in opacity and color caused by the staining solutions were measured. Then, the specimens were bleached with 35% hydrogen peroxide for 45 minutes followed by color/opacity measurements. Data were analyzed by ANOVA and Tukey's test (α = 0.05). The use of modeling liquids did not affect the initial color and opacity of composite. Reduced changes to color (E 00  = 3.44) and opacity (+2.67%) were observed for specimens modeled using Adper Universal. Bleaching procedures reduced the color (E 00  = 1.9-3.8) and opacity (-2.3 to 3.1%) alterations caused by staining solutions but were unable to restore the values observed at baseline. The use of universal adhesive as modeling liquid significantly reduced the color and opacity changes caused by staining solutions, and the bleaching procedure partially re-established the opacity and color of the composites. This study evaluates whether using adhesive systems for modeling a composite affects the color and opacity changes caused by staining solutions followed by a bleaching procedure. The findings suggest that the use of a universal adhesive as modeling liquid can reduce the alterations in optical properties caused by staining solutions, and the application of high-concentrated hydrogen peroxide over the composite reduce the color changes without fully recover the initial color. © 2018

Contribution of spiral artery blood flow changes assessed by transvaginal color Doppler sonography for predicting endometrial pathologies

Directory of Open Access Journals (Sweden)

Suna Kabil Kucur

2013-01-01

Full Text Available ive: To investigate the diagnostic value of blood flow measurements in spiral artery by transvaginal color Doppler sonography (CDS in predicting endometrial pathologies.Methods: Ninety-seven patients presenting with abnormal uterine bleeding and requiring endometrial assessment were included in this prospective observational study. Endometrial thickness, structure and echogenicity were recorded. Pulsatility index (PI and resistive index (RI of the spiral artery were measured by transvaginal CDS. Endometrial sampling was performed for all subjects. Sonographic and hystopathologic findings were compared.Results: The histopathological diagnoses were as follows; 39 cases (40.2% endometrial polyp, 9 cases (9.3% endometrial hyperplasia, 10 cases (10.3 submucous myoma, 7 cases (7.2% endometrium cancer, and 32 cases (33% nonspecific findings. The spiral artery PI in endometrium cancer group was highly significantly lower than other groups (p<0.01. The spiral artery RI was also significantly lower in the patients with malignant histology (p<0.05. Conclusion: Endometrial pathologies are associated significantly with endometrial spiral artery Doppler changes.Key words: Spiral artery, Doppler ultrasonography, endometrium

Perspectives on empirical approaches for ocean color remote sensing of chlorophyll in a changing climate.

Science.gov (United States)

Dierssen, Heidi M

2010-10-05

Phytoplankton biomass and productivity have been continuously monitored from ocean color satellites for over a decade. Yet, the most widely used empirical approach for estimating chlorophyll a (Chl) from satellites can be in error by a factor of 5 or more. Such variability is due to differences in absorption and backscattering properties of phytoplankton and related concentrations of colored-dissolved organic matter (CDOM) and minerals. The empirical algorithms have built-in assumptions that follow the basic precept of biological oceanography--namely, oligotrophic regions with low phytoplankton biomass are populated with small phytoplankton, whereas more productive regions contain larger bloom-forming phytoplankton. With a changing world ocean, phytoplankton composition may shift in response to altered environmental forcing, and CDOM and mineral concentrations may become uncoupled from phytoplankton stocks, creating further uncertainty and error in the empirical approaches. Hence, caution is warranted when using empirically derived Chl to infer climate-related changes in ocean biology. The Southern Ocean is already experiencing climatic shifts and shows substantial errors in satellite-derived Chl for different phytoplankton assemblages. Accurate global assessments of phytoplankton will require improved technology and modeling, enhanced field observations, and ongoing validation of our "eyes in space."

Using color management in color document processing

Science.gov (United States)

Nehab, Smadar

1995-04-01

Color Management Systems have been used for several years in Desktop Publishing (DTP) environments. While this development hasn't matured yet, we are already experiencing the next generation of the color imaging revolution-Device Independent Color for the small office/home office (SOHO) environment. Though there are still open technical issues with device independent color matching, they are not the focal point of this paper. This paper discusses two new and crucial aspects in using color management in color document processing: the management of color objects and their associated color rendering methods; a proposal for a precedence order and handshaking protocol among the various software components involved in color document processing. As color peripherals become affordable to the SOHO market, color management also becomes a prerequisite for common document authoring applications such as word processors. The first color management solutions were oriented towards DTP environments whose requirements were largely different. For example, DTP documents are image-centric, as opposed to SOHO documents that are text and charts centric. To achieve optimal reproduction on low-cost SOHO peripherals, it is critical that different color rendering methods are used for the different document object types. The first challenge in using color management of color document processing is the association of rendering methods with object types. As a result of an evolutionary process, color matching solutions are now available as application software, as driver embedded software and as operating system extensions. Consequently, document processing faces a new challenge, the correct selection of the color matching solution while avoiding duplicate color corrections.

Color consilience: color through the lens of art practice, history, philosophy, and neuroscience.

Science.gov (United States)

Conway, Bevil R

2012-03-01

Paintings can be interpreted as the product of the complex neural machinery that translates physical light signals into behavior, experience, and emotion. The brain mechanisms responsible for vision and perception have been sculpted during evolution and further modified by cultural exposure and development. By closely examining artists' paintings and practices, we can discover hints to how the brain works, and achieve insight into the discoveries and inventions of artists and their impact on culture. Here, I focus on an integral aspect of color, color contrast, which poses a challenge for artists: a mark situated on an otherwise blank canvas will appear a different color in the context of the finished painting. How do artists account for this change in color during the production of a painting? In the broader context of neural and philosophical considerations of color, I discuss the practices of three modern masters, Henri Matisse, Paul Cézanne, and Claude Monet, and suggest that the strategies they developed not only capitalized on the neural mechanisms of color, but also influenced the trajectory of western art history. © 2012 New York Academy of Sciences.

Grapheme learning and grapheme-color synesthesia: toward a comprehensive model of grapheme-color association

Science.gov (United States)

Asano, Michiko; Yokosawa, Kazuhiko

2013-01-01

Recent progress in grapheme-color synesthesia research has revealed that certain regularities, as well as individual differences, figure into grapheme-color associations. Although several factors are known to regulate grapheme-color associations, the impact of factors, including their interrelationships, on synesthesia remains unclear. We investigated determinants of synesthetic color for graphemes (characters, letters) of Hiragana, a phonetic script in the Japanese language, and the English alphabet. Results revealed that grapheme ordinality was the strongest predictor of synesthetic colors for Hiragana characters, followed by character sound, and visual shape. Ordinality and visual shapes also significantly predicted synesthetic colors for English alphabet letters, however, sounds did not. The relative impact of grapheme properties on grapheme-color associations and the differences between these two writing systems are accounted for by considering the way graphemes are processed in the brain and introduced during an individual's development. A new model is proposed which takes into account the developmental process of grapheme learning. The model provides comprehensive explanation of synesthetic grapheme-color association determination processes, including the differences across writing systems. PMID:24273504

Grapheme learning and grapheme-color synesthesia: Toward a comprehensive model of grapheme-color association

Directory of Open Access Journals (Sweden)

Michiko eAsano

2013-11-01

Full Text Available Recent progress in grapheme-color synesthesia research has revealed that certain regularities, as well as individual differences, figure into grapheme-color associations. Although several factors are known to regulate grapheme-color associations, the impact of factors, including their interrelationships, on synesthesia remains unclear. We investigated determinants of synesthetic color for graphemes (characters, letters of Hiragana, a phonetic script in the Japanese language, and the English alphabet. Results revealed that grapheme ordinality was the strongest predictor of synesthetic colors for Hiragana characters, followed by character sound, and visual shape. Ordinality and visual shapes also significantly predicted synesthetic colors for English alphabet letters, however, sounds did not. The relative impact of grapheme properties on grapheme-color associations and the differences between these two writing systems are accounted for by considering the way graphemes are processed in the brain and introduced during an individual's development. A new model is proposed which takes into account the developmental process of grapheme learning. The model provides comprehensive explanation of synesthetic grapheme-color association determination processes, including the differences across writing systems.

Grapheme learning and grapheme-color synesthesia: toward a comprehensive model of grapheme-color association.

Science.gov (United States)

Asano, Michiko; Yokosawa, Kazuhiko

2013-01-01

Recent progress in grapheme-color synesthesia research has revealed that certain regularities, as well as individual differences, figure into grapheme-color associations. Although several factors are known to regulate grapheme-color associations, the impact of factors, including their interrelationships, on synesthesia remains unclear. We investigated determinants of synesthetic color for graphemes (characters, letters) of Hiragana, a phonetic script in the Japanese language, and the English alphabet. Results revealed that grapheme ordinality was the strongest predictor of synesthetic colors for Hiragana characters, followed by character sound, and visual shape. Ordinality and visual shapes also significantly predicted synesthetic colors for English alphabet letters, however, sounds did not. The relative impact of grapheme properties on grapheme-color associations and the differences between these two writing systems are accounted for by considering the way graphemes are processed in the brain and introduced during an individual's development. A new model is proposed which takes into account the developmental process of grapheme learning. The model provides comprehensive explanation of synesthetic grapheme-color association determination processes, including the differences across writing systems.

Repeatability in Color Measurements of a Spectrophotometer using Different Positioning Devices.

Science.gov (United States)

Hemming, Michael; Kwon, So Ran; Qian, Fang

2015-12-01

This study aimed to evaluate the repeatability of color measurements of an intraoral spectrophotometer with the use of three different methods by two operators. A total of 60 teeth were obtained, comprising 30 human maxillary teeth [central incisors (n = 10); canines (n = 10); molars (n = 10)] and 30 artificial teeth [lateral incisors (n = 10); premolar (n = 20)]. Multiple repeated color measurements were obtained from each tooth using three measuring methods by each of the two operators. Five typodonts with alternating artificial and human teeth were made. Measurements were taken by two operators with the Vita EasyShade spectrophotometer using the custom tray (CT), custom jig (CJ) and free hand (FH) method, twice, at an interval of 2 to 7 days. Friedman test was used to detect difference among the three color measuring methods. Post hoc Wilcoxon signed-rank test with Bonferroni correction applied was used for pair-wise comparison of color measurements among the three methods. Additionally, a paired-sample t-test was used to assess a significant difference between the two duplicated measurements made on the same tooth by the same operator for each color parameter and measuring method. For operator A, mean (SD) overall color change-ΔE* (SD) perceived for FH, CT and CJ were 2.21(2.00), 2.39 (1.58) and 2.86 (1.92), respectively. There was statistically significant difference in perceived ΔE* in FH vs CJ (p = 0.0107). However, there were no significant differences between FH and CT (p = 0.2829) or between CT and CJ (p = 0.1159). For operator B mean ΔE* (SD) for FH, CT and CJ were 3.24 (3.46), 1.95 (1.19) and 2.45 (1.56), respectively. There was a significant difference between FH and CT (p = 0.0031). However, there were no statistically significant differences in ΔE* in FH vs CJ (p = 0.3696) or CT vs CJ (p = 0.0809). The repeatability of color measurements was different among the three measuring methods by operators. Overall, the CT method worked well for both

Characteristics of color memory for natural scenes

Science.gov (United States)

Amano, Kinjiro; Uchikawa, Keiji; Kuriki, Ichiro

2002-08-01

To study the characteristics of color memory for natural images, a memory-identification task was performed with differing color contrasts; three of the contrasts were defined by chromatic and luminance components of the image, and the others were defined with respect to the categorical colors. After observing a series of pictures successively, subjects identified the pictures using a confidence rating. Detection of increased contrasts tended to be harder than detection of decreased contrasts, suggesting that the chromaticness of pictures is enhanced in memory. Detecting changes within each color category was more difficult than across the categories. A multiple mechanism that processes color differences and categorical colors is briefly considered. 2002 Optical Society of America

Color preferences are not universal.

Science.gov (United States)

Taylor, Chloe; Clifford, Alexandra; Franklin, Anna

2013-11-01

Claims of universality pervade color preference research. It has been argued that there are universal preferences for some colors over others (e.g., Eysenck, 1941), universal sex differences (e.g., Hurlbert & Ling, 2007), and universal mechanisms or dimensions that govern these preferences (e.g., Palmer & Schloss, 2010). However, there have been surprisingly few cross-cultural investigations of color preference and none from nonindustrialized societies that are relatively free from the common influence of global consumer culture. Here, we compare the color preferences of British adults to those of Himba adults who belong to a nonindustrialized culture in rural Namibia. British and Himba color preferences are found to share few characteristics, and Himba color preferences display none of the so-called "universal" patterns or sex differences. Several significant predictors of color preference are identified, such as cone-contrast between stimulus and background (Hurlbert & Ling, 2007), the valence of color-associated objects (Palmer & Schloss, 2010), and the colorfulness of the color. However, the relationship of these predictors to color preference was strikingly different for the two cultures. No one model of color preference is able to account for both British and Himba color preferences. We suggest that not only do patterns of color preference vary across individuals and groups but the underlying mechanisms and dimensions of color preference vary as well. The findings have implications for broader debate on the extent to which our perception and experience of color is culturally relative or universally constrained. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Embedding Color Watermarks in Color Images

Directory of Open Access Journals (Sweden)

Wu Tung-Lin

2003-01-01

Full Text Available Robust watermarking with oblivious detection is essential to practical copyright protection of digital images. Effective exploitation of the characteristics of human visual perception to color stimuli helps to develop the watermarking scheme that fills the requirement. In this paper, an oblivious watermarking scheme that embeds color watermarks in color images is proposed. Through color gamut analysis and quantizer design, color watermarks are embedded by modifying quantization indices of color pixels without resulting in perceivable distortion. Only a small amount of information including the specification of color gamut, quantizer stepsize, and color tables is required to extract the watermark. Experimental results show that the proposed watermarking scheme is computationally simple and quite robust in face of various attacks such as cropping, low-pass filtering, white-noise addition, scaling, and JPEG compression with high compression ratios.

Race/ethnicity, color-blind racial attitudes, and multicultural counseling competence: the moderating effects of multicultural counseling training.

Science.gov (United States)

Chao, Ruth Chu-Lien; Wei, Meifen; Good, Glenn E; Flores, Lisa Y

2011-01-01

Increasing trainees' multicultural counseling competence (MCC) has been a hot topic in counseling. Scholars have identified predictors (e.g., race/ethnicity, color-blindness) of MCC, and educators provide multicultural training for trainees. Using a sample of 370 psychology trainees, this study examined whether multicultural training (a) moderated racial/ethnic differences on MCC and (b) changed the relationship between color-blindness and MCC. Results indicated a significant interaction effect of race/ethnicity (i.e., White vs. ethnic minority) and multicultural training on multicultural awareness, but not on multicultural knowledge. Specifically, at lower levels of training, racial/ethnic minority trainees had significantly higher multicultural awareness than their White counterparts; at higher levels of training, no significant difference was found. Described differently, more training significantly enhanced Whites' multicultural awareness, but did not enhance racial/ethnic minority trainees' awareness. Additionally, there was a significant interaction effect of color-blindness and multicultural training on multicultural knowledge, but not on multicultural awareness. The association between color-blindness and multicultural knowledge was stronger at higher levels of multicultural training than at lower levels of training. Alternatively, the effect of training on enhancing knowledge was stronger for those with lower color-blindness than for those with higher color-blindness.

Correlation between skin color evaluation by skin color scale chart and narrowband reflectance spectrophotometer.

Science.gov (United States)

Treesirichod, Arucha; Chansakulporn, Somboon; Wattanapan, Pattra

2014-07-01

Various methods are available for the evaluation of skin color. A skin color scale chart is a convenient and inexpensive tool. However, the correlation between a skin color scale chart and objective measurement has not been evaluated. To assess the correlation between skin color evaluation done by a skin color scale chart (Felix von Luschan skin color chart) and a narrowband reflectance spectrophotometer (Mexameter MX18). The participants were evaluated for skin color by using the Felix von Luschan skin color chart (range 1-36) and a narrowband reflectance spectrophotometer (Mexameter MX18) in which the results of the measurements were expressed as Erythema (E) and Melanin (M) indices. Skin color was measured on four different anatomical skin sites from each participant on the medial aspect of the volar and the dorsal regions of both forearms. A total of 208 records from 52 participants were established. The majority of participants (19.2%) were rated with the skin color scale at the number 16 (range 14-33). The mean M plus E, M, and E indices were 498.9 ± 143.9, 230.4 ± 74.4, and 268.5 ± 73.2, respectively. The correlation coefficient between the number on the skin color scale and each index: M plus E, M, and E indices were 0.90, 0.90, and 0.86, respectively, with a statistical significance of P spectrophotometer.

Coloring Jupiter's clouds: Radiolysis of ammonium hydrosulfide (NH4SH)

Science.gov (United States)

Loeffler, Mark J.; Hudson, Reggie L.

2018-03-01

Here we present our recent studies on the color and spectral reflectance changes induced by ∼0.9 MeV proton irradiation of ammonium hydrosulfide, NH4SH, a compound predicted to be an important tropospheric cloud component of Jupiter and other giant planets. Ultraviolet-visible spectroscopy was used to observe and identify reaction products in the ice sample and digital photography was used to document the corresponding color changes at 10-160 K. Our experiments clearly show that the resulting color of the sample depends not only on the irradiation dose but also the irradiation temperature. Furthermore, unlike in our most recent studies of irradiation of NH4SH at 120 K, which showed that higher irradiation doses caused the sample to appear green, the lower temperature studies now show that the sample becomes red after irradiation. However, comparison of these lower temperature spectra over the entire spectral range observed by HST shows that even though the color and spectrum resemble the color and spectrum of the GRS, there is still enough difference to suggest that another component may be needed to adequately fit spectra of the GRS and other red regions of Jupiter's clouds. Regardless, the presence of NH4SH in the atmosphere of Jupiter and other gas giants, combined with this compound's clear alteration via radiolysis, suggests that its contribution to the ultraviolet-visible spectra of any of these object's clouds is significant.

Scanner-based macroscopic color variation estimation

Science.gov (United States)

Kuo, Chunghui; Lai, Di; Zeise, Eric

2006-01-01

Flatbed scanners have been adopted successfully in the measurement of microscopic image artifacts, such as granularity and mottle, in print samples because of their capability of providing full color, high resolution images. Accurate macroscopic color measurement relies on the use of colorimeters or spectrophotometers to provide a surrogate for human vision. The very different color response characteristics of flatbed scanners from any standard colorimetric response limits the utility of a flatbed scanner as a macroscopic color measuring device. This metamerism constraint can be significantly relaxed if our objective is mainly to quantify the color variations within a printed page or between pages where a small bias in measured colors can be tolerated as long as the color distributions relative to the individual mean values is similar. Two scenarios when converting color from the device RGB color space to a standardized color space such as CIELab are studied in this paper, blind and semi-blind color transformation, depending on the availability of the black channel information. We will show that both approaches offer satisfactory results in quantifying macroscopic color variation across pages while the semi-blind color transformation further provides fairly accurate color prediction capability.

Influence of Mechanical and Chemical Degradation in the Surface Roughness, Gloss, and Color of Microhybrid Composites.

Science.gov (United States)

Lemos, Cleidiel Aa; Mauro, Silvio J; Dos Santos, Paulo H; Briso, Andre Lf; Fagundes, Ticiane C

2017-04-01

The aim of this study was to investigate the association of different degradations on the roughness, gloss, and color changes of microhybrid composites. Ten specimens were prepared for Charisma, Amelogen Plus, Point 4, and Opallis resins. Surfaces were polished and baseline measurements of roughness, gloss, and color were recorded. Specimens were then submitted to chemical and mechanical challenges, and the specimens were reevaluated. Roughness and gloss were analyzed by Kruskal -Wallis and Dunn's test (p one-way analysis of variance and Tukey's tests (p gloss (p gloss, there was no difference between composites before challenges. However, all composites showed a significant increase of roughness after challenges, with highest values for Charisma. The gloss was influenced by challenges, evidencing the best gloss for Point 4. Charisma showed the highest value of color change. There was no correlation between surface roughness and gloss for the initial analysis, and after the challenges. Composites were influenced by association of challenges, and Charisma showed the highest changes for roughness, gloss, and color. The type of composite resin influenced the properties of materials, which are surface roughness, gloss, and color change. The dentist should be aware of the performance of different brands, to choose the correct required composite resin for each type of patient or region to be restored.

Object color affects identification and repetition priming.

Science.gov (United States)

Uttl, Bob; Graf, Peter; Santacruz, Pilar

2006-10-01

We investigated the influence of color on the identification of both non-studied and studied objects. Participants studied black and white and color photos of common objects and memory was assessed with an identification test. Consistent with our meta-analysis of prior research, we found that objects were easier to identify from color than from black and white photos. We also found substantial priming in all conditions, and study-to-test changes in an object's color reduced the magnitude of priming. Color-specific priming effects were large for color-complex objects, but minimal for color-simple objects. The pattern and magnitude of priming effects was not influenced either by the extent to which an object always appears in the same color (i.e., whether a color is symptomatic of an object) or by the object's origin (natural versus fabricated). We discuss the implications of our findings for theoretical accounts of object perception and repetition priming.

Effect of the shades of background substructures on the overall color of zirconia-based all-ceramic crowns

Science.gov (United States)

Tulapornchai, Chantana; Mamani, Jatuphol; Kamchatphai, Wannaporn; Thongpun, Noparat

2013-01-01

PURPOSE The objective of this study was to determine the effect of the color of a background substructure on the overall color of a zirconia-based all-ceramic crown. MATERIALS AND METHODS Twenty one posterior zirconia crowns were made for twenty subjects. Seven premolar crowns and six molar crowns were cemented onto abutments with metal post and core in the first and second group. In the third group, eight molar crowns were cemented onto abutments with a prefabricated post and composite core build-up. The color measurements of all-ceramic crowns were made before try-in, before and after cementation. A repeated measure ANOVA was used for a statistical analysis of a color change of all-ceramic crowns at α=.05. Twenty four zirconia specimens, with different core thicknesses (0.4-1 mm) were also prepared to obtain the contrast ratio of zirconia materials after veneering. RESULTS L*, a*, and b* values of all-ceramic crowns cemented either on a metal cast post and core or on a prefabricated post did not show significant changes (P>.05). However, the slight color changes of zirconia crowns were detected and represented by ΔE*ab values, ranging from 1.2 to 3.1. The contrast ratios of zirconia specimens were 0.92-0.95 after veneering. CONCLUSION No significant differences were observed between the L*, a*, and b* values of zirconia crowns cemented either on a metal cast post and core or a prefabricated post and composite core. However, the color of a background substructure could affect the overall color of posterior zirconia restorations with clinically recommended core thickness according to ΔE*ab values. PMID:24049574

Color Perception in Children with Autism

Science.gov (United States)

Franklin, Anna; Sowden, Paul; Burley, Rachel; Notman, Leslie; Alder, Elizabeth

2008-01-01

This study examined whether color perception is atypical in children with autism. In experiment 1, accuracy of color memory and search was compared for children with autism and typically developing children matched on age and non-verbal cognitive ability. Children with autism were significantly less accurate at color memory and search than…

Analysis of the Influence of Food Colorings in Esthetic Orthodontic Elastomeric Ligatures.

Science.gov (United States)

Dias da Silva, Vanessa; de Lima, Eduardo Martinelli S; Dias, Caroline; Osório, Leandro Berni

2016-01-01

The purpose of this study was to evaluate in vitro the color changes of esthetic orthodontic elastomeric ligatures of different shades when exposed to four food colorings commonly found in the diet of patients. The sample consisted of esthetic orthodontic elastomeric ligatures in the colors pearl, pearl blue, pearl white and colorless, which were immersed for 72 hours in five different solutions: distilled water (control group), coffee, tea, Coca-Cola ® and wine. The color changes of the esthetic orthodontic elastomeric ligatures were measured with the aid of a spectrophotometer, at T1 - as provided by the manufacturer; and T2 - after colorings process. The results indicated that the esthetic orthodontic elastomeric ligatures of all initial hues are susceptible to pigmentation. Among the evaluated colors, all changed the finished look and the color of the samples tested. In ascending order, the color of the samples was as follows: distilled water, Coca-Cola ® , black tea, wine and coffee. The substances that have a greater potential for pigmentation in esthetic orthodontic elastomeric ligatures were black tea, wine and coffee, respectively. All shades of esthetic orthodontic elastomeric ligatures are susceptible to color change.

[Effect of bleaching agents on the color of indirect and direct composite resins].

Science.gov (United States)

Xing, Wenzhong; Jiang, Tao; Chen, Xiaodong; Wang, Yining

2014-09-01

To evaluate the effect of bleaching agents on the color of indirect and direct composite resins. Five resin composite materials were tested in this in vitro study. The five composites were as follow: two indirect composite resins (Adoro SR, Ceramage) and three direct composite resins (Filtek Z350, Clearfil Majesty Esthetic, and Gradia Direct Anterior). For each material, twenty disk-shaped specimens were prepared and randomly divided into five groups according to the color parameters of specimens before bleaching treatment. The composite resin specimens were treated by one of five sample solutions which were at-home bleaching agents (10% and 15% carbarmide peroxide), in- office bleaching agents (38% H(2)O(2) and 35%H(2)O(2)) and deionized water (control group). The color parameters of specimens were measured by spectrophotometer at baseline and after bleaching treatments. The color differences (ΔE values) between baseline and post-treatments were calculated. The data of color differences were evaluated statistically using two-way analysis with a significance level of 0.05. The color changes of the resin composites were less than 2.0 after bleaching agent treatment, therefore were not perceptible. Slight increase of L(*) values and decrease of C(*)ab values in color parameters of specimens were observed. There were statistically significant differences in ΔE values for different bleaching treatments and resin materials (P = 0.001). The bleaching agents did not affect the color of indirect and direct composite resins tested.

Color evaluation of computer-generated color rainbow holography

International Nuclear Information System (INIS)

Shi, Yile; Wang, Hui; Wu, Qiong

2013-01-01

A color evaluation approach for computer-generated color rainbow holography (CGCRH) is presented. Firstly, the relationship between color quantities of a computer display and a color computer-generated holography (CCGH) colorimetric system is discussed based on color matching theory. An isochromatic transfer relationship of color quantity and amplitude of object light field is proposed. Secondly, the color reproduction mechanism and factors leading to the color difference between the color object and the holographic image that is reconstructed by CGCRH are analyzed in detail. A quantitative color calculation method for the holographic image reconstructed by CGCRH is given. Finally, general color samples are selected as numerical calculation test targets and the color differences between holographic images and test targets are calculated based on our proposed method. (paper)

Sensory Drive, Color, and Color Vision.

Science.gov (United States)

Price, Trevor D

2017-08-01

Colors often appear to differ in arbitrary ways among related species. However, a fraction of color diversity may be explained because some signals are more easily perceived in one environment rather than another. Models show that not only signals but also the perception of signals should regularly evolve in response to different environments, whether these primarily involve detection of conspecifics or detection of predators and prey. Thus, a deeper understanding of how perception of color correlates with environmental attributes should help generate more predictive models of color divergence. Here, I briefly review our understanding of color vision in vertebrates. Then I focus on opsin spectral tuning and opsin expression, two traits involved in color perception that have become amenable to study. I ask how opsin tuning is correlated with ecological differences, notably the light environment, and how this potentially affects perception of conspecific colors. Although opsin tuning appears to evolve slowly, opsin expression levels are more evolutionarily labile but have been difficult to connect to color perception. The challenge going forward will be to identify how physiological differences involved in color vision, such as opsin expression levels, translate into perceptual differences, the selection pressures that have driven those differences, and ultimately how this may drive evolution of conspecific colors.

Theoretical predictions of the changes in the irradiance and color of light beams traveling in sugared water caused by optical rotation phenomena, and their possible applications for educational purposes

Science.gov (United States)

Tokumitsu, S.; Hasegawa, M.

2018-05-01

The coloring phenomena caused by optical rotation of polarized light beams in sugared water can be an appropriate subject for use as an educational tool. In this paper, such coloring phenomena are studied in terms of theory, and the results are compared with experimental results. First, polarized laser beams in red, blue, or green were allowed to travel in sugared water of certain concentrations, and changes in the irradiance of the beams were measured while changing the distance between a pair of polarizing plates arranged in the sugared water. The angle of rotation was then determined for each color. An equation was established for predicting a theoretical value of the angle of rotation for laser beams of specific colors (wavelengths) traveling in sugared water of specific concentrations. The predicted results from the equation exhibited satisfactory agreement with the experimental values obtained from the measurements. In addition, changes in the irradiance of traveling laser beams, as well as the changes in colors observable for white light beams, were also predicted, resulting in good agreement with the observed results.

Color planner for designers based on color emotions

Science.gov (United States)

Cheng, Ka-Man; Xin, John H.; Taylor, Gail

2002-06-01

During the color perception process, an associated feeling or emotion is induced in our brains, and this kind of emotion is termed as 'color emotion.' The researchers in the field of color emotions have put many efforts in quantifying color emotions with the standard color specifications and evaluating the influence of hue, lightness and chroma to the color emotions of human beings. In this study, a color planner was derived according to these findings so that the correlation of color emotions and standard color specifications was clearly indicated. Since people of different nationalities usually have different color emotions as different cultural and traditional backgrounds, the subjects in this study were all native Hong Kong Chinese and the color emotion words were all written in Chinese language in the visual assessments. Through the color planner, the designers from different areas, no matter fashion, graphic, interior or web site etc., can select suitable colors for inducing target color emotions to the customers or product-users since different colors convey different meanings to them. In addition, the designers can enhance the functionality and increase the attractiveness of their designed products by selecting suitable colors.

Influence of Resin Cements on Color Stability of Different Ceramic Systems.

Science.gov (United States)

Rodrigues, Renata Borges; Lima, Erick de; Roscoe, Marina Guimarães; Soares, Carlos José; Cesar, Paulo Francisco; Novais, Veridiana Resende

2017-01-01

The purpose of this study was to evaluate color stability of two dental ceramics cemented with two resin cements, assessing the color difference (ΔE00) by the measurement of L*, a*, b*, c* and h* of transmittance. The combination of two ceramic system (feldspathic and lithium disilicate) and two resin cements - color A3 (RelyX ARC and Variolink II) resulted in 4 groups (n=5). Ten disks-shaped specimens were fabricated for each ceramic system (10x1.5 mm), etched with hydrofluoric acid (10%) and silanized prior to cementation. The color analysis was performed 24 h after cementation of the samples and after 6 months of storage in relative humidity by means of spectrophotometry. The ΔE00 values were analyzed statistically by two-way ANOVA followed by the Tukey test (p<0.05). One-way ANOVA were calculated for the means of individual color coordinates (L*, a*, b*, c* and h*). Two-way ANOVA showed that only the ceramic factor was significant (p=0.003), but there was no difference for the cement factor (p=0.275) nor for the ceramic/cement interaction (p=0.161). The feldspathic ceramic showed the highest values of ΔE00. Variations in L*, a*, b*, c* and h* were more significant for feldspathic ceramic. In conclusion, storage alters similarly the optical properties of the resin cements and feldspathic porcelain was more susceptible to cement color change after aging.

Integrated color face graphs for plant accident display

International Nuclear Information System (INIS)

Hara, Fumio

1987-01-01

This paper presents an integrated man-machine interface that uses cartoon-like colored graphs in the form of faces, that, through different facial expressions, display a plant condition. This is done by drawing the face on a CRT by nonlinearly transforming 31 variables and coloring the face. This integrated color graphics technique is applied to display the progess of events in the Three Mile Island nuclear power plant accident. Human visual perceptive characteristics are investigated in relation to the perception of the plant accident process, the naturality in face color change, and the consistency between facial expressions and colors. This paper concludes that colors used in an integrated color face graphs must be completely consistent with emotional feelings perceived from the colors. (author)

Real color captures attention and overrides spatial cues in grapheme-color synesthetes but not in controls.

Science.gov (United States)

van Leeuwen, Tessa M; Hagoort, Peter; Händel, Barbara F

2013-08-01

Grapheme-color synesthetes perceive color when reading letters or digits. We investigated oscillatory brain signals of synesthetes vs. controls using magnetoencephalography. Brain oscillations specifically in the alpha band (∼10Hz) have two interesting features: alpha has been linked to inhibitory processes and can act as a marker for attention. The possible role of reduced inhibition as an underlying cause of synesthesia, as well as the precise role of attention in synesthesia is widely discussed. To assess alpha power effects due to synesthesia, synesthetes as well as matched controls viewed synesthesia-inducing graphemes, colored control graphemes, and non-colored control graphemes while brain activity was recorded. Subjects had to report a color change at the end of each trial which allowed us to assess the strength of synesthesia in each synesthete. Since color (synesthetic or real) might allocate attention we also included an attentional cue in our paradigm which could direct covert attention. In controls the attentional cue always caused a lateralization of alpha power with a contralateral decrease and ipsilateral alpha increase over occipital sensors. In synesthetes, however, the influence of the cue was overruled by color: independent of the attentional cue, alpha power decreased contralateral to the color (synesthetic or real). This indicates that in synesthetes color guides attention. This was confirmed by reaction time effects due to color, i.e. faster RTs for the color side independent of the cue. Finally, the stronger the observed color dependent alpha lateralization, the stronger was the manifestation of synesthesia as measured by congruency effects of synesthetic colors on RTs. Behavioral and imaging results indicate that color induces a location-specific, automatic shift of attention towards color in synesthetes but not in controls. We hypothesize that this mechanism can facilitate coupling of grapheme and color during the development of

Color and behavior differently predict competitive outcomes for divergent stickleback color morphs

Science.gov (United States)

Lehto, Whitley R; Lierheimer, V Faith

2018-01-01

Abstract Our knowledge of how male competition contributes to speciation is dominated by investigations of competition between within-species morphs or closely related species that differ in conspicuous traits expressed during the breeding season (e.g. color, song). In such studies, it is important to consider the manner in which putatively sexually selected traits influence the outcome of competitive interactions within and between types because these traits can communicate information about competitor quality and may not be utilized by homotypic and heterotypic receivers in the same way. We studied the roles of breeding color and aggressive behaviors in competition within and between two divergent threespine stickleback Gasterosteus aculeatus color types. Our previous work in this system showed that the switch from red to black breeding coloration is associated with changes in male competition biases. Here, we find that red and black males also use different currencies in competition. Winners of both color types performed more aggressive behaviors than losers, regardless of whether the competitor was of the same or opposite color type. But breeding color differently predicted competitive outcomes for red and black males. Males who were redder at the start of competition were more likely to win when paired with homotypic competitors and less likely to win when paired with heterotypic competitors. In contrast, black color, though expressed in the breeding season and condition dependent, was unrelated to competitive outcomes. Placing questions about the role of male competition in speciation in a sexual signal evolution framework may provide insight into the “why and how” of aggression biases and asymmetries in competitive ability between closely related morphs and species. PMID:29492044

Synesthesia induced colors do not bias attention in the same manner as physical colors do

OpenAIRE

Sørensen, Thomas Alrik; Ásgeirsson, Árni Gunnar

2015-01-01

Grapheme-color synesthesia affects visual cognition in significant ways. The congruence or incongruence of physical stimuli with synesthetic color affects how quickly and accurately synesthetes respond to stimuli, and the induced color experience may help them memorize achromatic material and performance in visual search, much like physical stimulus features. It has been demonstrated that the content of visual memory can guide attention (e.g. Carlisle & Woodman, 2011). This effect can be ...

Transparent organic light-emitting diodes with different bi-directional emission colors using color-conversion capping layers

Energy Technology Data Exchange (ETDEWEB)

Lee, Jonghee, E-mail: jonghee.lee@etri.re.kr [OLED Research Center, Electronics and Telecommunications Research Institute (ETRI), Daejeon 305-700 (Korea, Republic of); Institut für Angewandte Photophysik, Technische Universität Dresden, George-Bähr-Straße 1, 01062 Dresden (Germany); Koh, Tae-Wook [Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701 (Korea, Republic of); Cho, Hyunsu [OLED Research Center, Electronics and Telecommunications Research Institute (ETRI), Daejeon 305-700 (Korea, Republic of); Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701 (Korea, Republic of); Schwab, Tobias [Institut für Angewandte Photophysik, Technische Universität Dresden, George-Bähr-Straße 1, 01062 Dresden (Germany); Lee, Jae-Hyun [Department School of Global Convergence Studies, Hanbat National University, San 16-1, Duckmyoung-dong, Daejeon 305-719 (Korea, Republic of); Hofmann, Simone [Institut für Angewandte Photophysik, Technische Universität Dresden, George-Bähr-Straße 1, 01062 Dresden (Germany); Lee, Jeong-Ik [OLED Research Center, Electronics and Telecommunications Research Institute (ETRI), Daejeon 305-700 (Korea, Republic of); Yoo, Seunghyup [Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701 (Korea, Republic of); and others

2015-06-15

We report a study on transparent organic light-emitting diodes (OLEDs) with different bi-directional emission colors, enabled by color-conversion organic capping layers. Starting from a transparent blue OLED with an uncapped Ag top electrode exhibiting an average transmittance of 33.9%, a 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)-doped tris-(8-hydroxy-quinolinato)-aluminum (Alq3) capping layer is applied to achieve color-conversion from blue to orange-red on the top side while maintaining almost unchanged device transmittance. This color-conversion capping layer does not only change the color of the top side emission, but also enhances the overall device efficiency due to the optical interaction of the capping layer with the primary blue transparent OLED. Top white emission from the transparent bi-directional OLED exhibits a correlated color temperature around 6000–7000 K, with excellent color stability as evidenced by an extremely small variation in color coordinate of Δ(x,y)=(0.002, 0.002) in the forward luminance range of 100–1000 cd m{sup −2}. At the same time, the blue emission color of bottom side is not influenced by the color conversion capping layer, which finally results in different emission colors of the two opposite sides of our transparent OLEDs. - Highlights: • We report transparent organic light-emitting diodes (OLEDs) with different bi-directional emission colors. • Transparent blue OLED with color-conversion organic capping layers (CCL) shows orange top side emission. • Top white emission exhibits a CCT around 7000 K, with excellent color stability on a driving voltage.

Transparent organic light-emitting diodes with different bi-directional emission colors using color-conversion capping layers

International Nuclear Information System (INIS)

Lee, Jonghee; Koh, Tae-Wook; Cho, Hyunsu; Schwab, Tobias; Lee, Jae-Hyun; Hofmann, Simone; Lee, Jeong-Ik; Yoo, Seunghyup

2015-01-01

We report a study on transparent organic light-emitting diodes (OLEDs) with different bi-directional emission colors, enabled by color-conversion organic capping layers. Starting from a transparent blue OLED with an uncapped Ag top electrode exhibiting an average transmittance of 33.9%, a 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)-doped tris-(8-hydroxy-quinolinato)-aluminum (Alq3) capping layer is applied to achieve color-conversion from blue to orange-red on the top side while maintaining almost unchanged device transmittance. This color-conversion capping layer does not only change the color of the top side emission, but also enhances the overall device efficiency due to the optical interaction of the capping layer with the primary blue transparent OLED. Top white emission from the transparent bi-directional OLED exhibits a correlated color temperature around 6000–7000 K, with excellent color stability as evidenced by an extremely small variation in color coordinate of Δ(x,y)=(0.002, 0.002) in the forward luminance range of 100–1000 cd m −2 . At the same time, the blue emission color of bottom side is not influenced by the color conversion capping layer, which finally results in different emission colors of the two opposite sides of our transparent OLEDs. - Highlights: • We report transparent organic light-emitting diodes (OLEDs) with different bi-directional emission colors. • Transparent blue OLED with color-conversion organic capping layers (CCL) shows orange top side emission. • Top white emission exhibits a CCT around 7000 K, with excellent color stability on a driving voltage

Influence of Tannin Extract and Yeast Extract on Color Preservation and Anthocyanin Content of Mulberry Wine.

Science.gov (United States)

You, Yilin; Li, Na; Han, Xue; Guo, Jielong; Liu, Guojie; Huang, Weidong; Zhan, Jicheng

2018-04-01

The color of mulberry wine is extremely unstable in processing and aging. This paper investigates the effects of tannin extract and yeast extract on the color and color-preserving characteristics of mulberry wine made from the Dashi cultivar. The results showed that the maximum absorption wavelength in both tannin extract and yeast extract groups changed generating the red shift effect. The color of the tannin extract maintained a good gloss in the first 4 months, while the yeast extract group showed remarkable color preservation for the first 3 months. The total anthocyanin and cyanidin-3-rutinoside contents in both experiment groups were significantly higher than that of the control group, thus proving that tannin extract and yeast extract both exert a remarkably positive effect on preserving the color of mulberry wine during its aging. Moreover, sensory analysis indicated that the quality of mulberry wine treated with tannin extract was significantly higher than that of the control. The distinct color of mulberry wine is one of the foremost qualities that imprints on consumers' senses, but it is extremely unstable in processing and aging. However, the color protection of mulberry wine was not studied previously. In this study, we found that tannin extract and yeast extract both exert a remarkably positive effect on preserving the color of mulberry wine during aging. The study is of great significance as a guide to improving the color stability of mulberry wine, thereby also improving and promoting the development of the mulberry deep processing industry. © 2018 Institute of Food Technologists®.

Biological associations of color variation in the Indo-Pacific swimming crab Charybdis hellerii

Directory of Open Access Journals (Sweden)

TIMOTEO T. WATANABE

2015-03-01

Full Text Available A marine biological invasion is a natural process accelerated by human activities, and the crab Charybdis hellerii is an example of a globally widespread invasive species. This study evaluated color variation in C. hellerii and its relationship to the sex, size and sexual maturity of these crabs, and compared the efficiency of a freeware digital image-editing program with a commercially available program. The color of the individuals was analyzed using standardized digital images. The color pattern varied significantly with size; smaller and immature individuals were darker than larger and mature ones. The female abdomen changed in morphology and color with sexual maturity, becoming wider and orange-colored. There was no statistical difference in the color values between males and females and immature males did not show morphological or color differences in their abdomen. This study highlights the possible relationships of the color and physiological state of the reproductive system, which could help in future studies of behavior, avoiding the need to dissect and/or remove individuals from nature for assessment of sexual maturity. The freeware program showed the same efficiency in digital image analysis as a widely known commercial program.

THE INFLUENCE OF WALL COLOR AND LAMP COLOR TEMPERATURE TO STUDENT’S CONCENTRATION AND COGNITION

Directory of Open Access Journals (Sweden)

KRISTANTO Luciana

2016-07-01

Full Text Available Concentration has an important role in our life, especially in order to get a quality and productivity in working. With concentration we can achieve the maximum and faster result in our work. Some ways to improve concentration that being researched here is by arranging the wall color and the lamp color temperature of the room. The color used as wall color in this research was the blue 9.8B, 7.4/5.6; and the orange 8.1YR, 8.7/3.7 of the Munsell color palette. Whereas the room lighting was the fluorescent lamp in 6500K (cool daylight and 2700K (warm white color temperature. Respondents of this research were 117 undergraduate students, the average GPA was 3.28; and 20,26 years as the mean age. The concentration and cognition tests are the Army Alfa test and IST subtest 9 that conducted in the room with different condition. Found in this research that the blue with cool daylight lamp has significant impact to concentration in 2,526 Lickert scale; and that orange with cool daylight lamp has correlation 0.781 to cognition result; but the other conditions have no significancy toward concentration and cognition

Observations and theoretical evaluations of color changes of traveling light beams caused by optical rotation phenomena in sugared water and their applications for educational purposes

Science.gov (United States)

Tokumitsu, Seika; Hasegawa, Makoto

2017-08-01

Investigations were conducted for the purposes of understanding coloring phenomena to be caused by optical rotation of polarized light beams in sugared water and realizing their applications as educational tools. By allowing polarized laser beams in red, blue or green to travel in sugared water of certain concentrations, changes in their intensities were measured while changing a distance between a pair of polarizing plates in the sugared water. An equation was established for a theoretical value for the angle of rotation for light of any colors (wavelengths) travelling in sugared water of any concentrations. The predicted results exhibited satisfactory matching with the measured values. In addition, the intensities of transmitted laser beams, as well as colors to be observable when a white-color LED torch was employed as a light source, were also become predictable, and the predicted results were well-matched with the observation results.

Possible influences on color constancy by motion of color targets and by attention-controlled gaze.

Science.gov (United States)

Wan, Lifang; Shinomori, Keizo

2018-04-01

We investigated the influence of motion on color constancy using a chromatic stimulus presented in various conditions (static, motion, and rotation). Attention to the stimulus and background was also controlled in different gaze modes, constant fixation of the stimulus, and random viewing of the stimulus. Color constancy was examined in six young observers using a haploscopic view of a computer monitor. The target and background were illuminated in simulation by red, green, blue, and yellow, shifted from daylight (D65) by specific color differences along L - M or S - (L + M) axes on the equiluminance plane. The standard pattern (under D65) and test pattern (under the color illuminant) of a 5-deg square were presented side by side, consisting of 1.2-deg square targets with one of 12 colors at each center, surrounded by 230 background ellipses consisting of eight other colors. The central color targets in both patterns flipped between top and bottom locations at the rate of 3 deg/s in the motion condition. The results indicated an average reduction of color constancy over the 12 test colors by motion. The random viewing parameter indicated better color constancy by more attention to the background, although the difference was not significant. Color constancy of the four color illuminations was better to worse in green, red, yellow, and blue, respectively. The reduction of color constancy by motion could be explained by less contribution of the illumination estimation effect on color constancy. In the motion with constant fixation condition, the retina strongly adapted to the mean chromaticity of the background. However, motion resulted in less attention to the color of the background, causing a weaker effect of the illumination estimation. Conversely, in the static state with a random viewing condition, more attention to the background colors caused a stronger illumination estimation effect, and color constancy was improved overall.

Colorization-Based RGB-White Color Interpolation using Color Filter Array with Randomly Sampled Pattern.

Science.gov (United States)

Oh, Paul; Lee, Sukho; Kang, Moon Gi

2017-06-28

Recently, several RGB-White (RGBW) color filter arrays (CFAs) have been proposed, which have extra white (W) pixels in the filter array that are highly sensitive. Due to the high sensitivity, the W pixels have better SNR (Signal to Noise Ratio) characteristics than other color pixels in the filter array, especially, in low light conditions. However, most of the RGBW CFAs are designed so that the acquired RGBW pattern image can be converted into the conventional Bayer pattern image, which is then again converted into the final color image by using conventional demosaicing methods, i.e., color interpolation techniques. In this paper, we propose a new RGBW color filter array based on a totally different color interpolation technique, the colorization algorithm. The colorization algorithm was initially proposed for colorizing a gray image into a color image using a small number of color seeds. Here, we adopt this algorithm as a color interpolation technique, so that the RGBW color filter array can be designed with a very large number of W pixels to make the most of the highly sensitive characteristics of the W channel. The resulting RGBW color filter array has a pattern with a large proportion of W pixels, while the small-numbered RGB pixels are randomly distributed over the array. The colorization algorithm makes it possible to reconstruct the colors from such a small number of RGB values. Due to the large proportion of W pixels, the reconstructed color image has a high SNR value, especially higher than those of conventional CFAs in low light condition. Experimental results show that many important information which are not perceived in color images reconstructed with conventional CFAs are perceived in the images reconstructed with the proposed method.

Modeling Color Difference for Visualization Design.

Science.gov (United States)

Szafir, Danielle Albers

2018-01-01

Color is frequently used to encode values in visualizations. For color encodings to be effective, the mapping between colors and values must preserve important differences in the data. However, most guidelines for effective color choice in visualization are based on either color perceptions measured using large, uniform fields in optimal viewing environments or on qualitative intuitions. These limitations may cause data misinterpretation in visualizations, which frequently use small, elongated marks. Our goal is to develop quantitative metrics to help people use color more effectively in visualizations. We present a series of crowdsourced studies measuring color difference perceptions for three common mark types: points, bars, and lines. Our results indicate that peoples' abilities to perceive color differences varies significantly across mark types. Probabilistic models constructed from the resulting data can provide objective guidance for designers, allowing them to anticipate viewer perceptions in order to inform effective encoding design.

Surface water change as a significant contributor to global evapotranspiration change

Science.gov (United States)

Zhan, S.; Song, C.

2017-12-01

Water comprises a critical component of global/regional hydrological and biogeochemical cycles and is essential to all organisms including humans. In the past several decades, climate change has intensified the hydrological cycle, with significant implications for ecosystem services and feedback to regional and global climate. Evapotranspiration (ET) as a linking mechanism between land surface and atmosphere is central to the water cycle and an excellent indicator of the intensity of water cycle. Knowledge of the temporal changes of ET is crucial for accurately estimating global or regional water budgets and better understanding climate and hydrological interactions. While studies have examined changes in global ET, they were conducted using a constant land and surface water (SW) area. However, as many studies have found that global SW is very dynamic and their surface areas have generally been increasing since the 1980s. The conversion from land to water and vice versa significantly changes the local ET since water bodies evaporate at a rate that can be much higher than that of the land. Here, we quantify the global changes in ET caused by such land-water conversion using remotely-sensed SW area and various ET and potential ET products. New SW and lost SW between circa-1985 and circa-2015 were derived from remote sensing and were used to modify the local ET estimates. We found an increase in ET in all continents as consistent with the net increase in SW area. The increasing SW area lead to a global increase in ET by 30.38 ± 5.28 km3/yr. This is a significant contribution when compared to the 92.95 km3/yr/yr increase in ET between 1982-1997 and 103.43 km3/yr/yr decrease between 1998-2008 by Jung et al., (2010) assuming a constant SW. The results enhance our understanding of the water fluxes between the land and atmosphere and supplement land water budget estimates. We conclude that changes in SW lead to a significant change in global ET that cannot be neglected in

Of colored numbers and numbered colors: interactive processes in grapheme-color synesthesia.

Science.gov (United States)

Gebuis, Titia; Nijboer, Tanja C W; van der Smagt, Maarten J

2009-01-01

Grapheme-color synesthetes experience a specific color when they see a grapheme but they do not report to perceive a grapheme when a color is presented. In this study, we investigate whether color can still evoke number-processes even when a vivid number experience is absent. We used color-number and number-color priming, both revealing faster responses in congruent compared to incongruent conditions. Interestingly, the congruency effect was of similar magnitude for both conditions, and a numerical distance effect was present only in the color-number priming task. In addition, a priming task in which synesthetes had to judge the parity of a colored number revealed faster responses in parity congruent than in parity incongruent trials. These combined results demonstrate that synesthesia is indeed bi-directional and of similar strength in both directions. Furthermore, they illustrate the precise nature of these interactions and show that the direction of these interactions is determined by task demands, not by the more vividly experienced aspect of the stimulus.

Color Sense

Science.gov (United States)

Johnson, Heidi S. S.; Maki, Jennifer A.

2009-01-01

This article reports a study conducted by members of the WellU Academic Integration Subcommittee of The College of St. Scholastica's College's Healthy Campus Initiative plan whose purpose was to determine whether changing color in the classroom could have a measurable effect on students. One simple improvement a school can make in a classroom is…

Role of Colors in Pediatric Dental Practices.

Science.gov (United States)

Bubna, Ketan; Hegde, Sapna; Rao, Dinesh

This study evaluated the association between colors and emotions in a pediatric dental population. In this randomized cross-sectional study, 100 children aged 6-12 years were categorized as non-anxious and anxious using Corah's Dental Anxiety Scale-Revised. They were then instructed to color two cartoon faces, one depicting happiness emotion and the other, sadness, with any of six colors provided. Data obtained were statistically analyzed. The mean Corah's Dental Anxiety scores were 11.7 and 4.97 for the anxious and non-anxious children, respectively. Both groups expressed the highest preference for the color yellow for happiness emotion. No significant differences were observed between color choices in either group (p>0.05), except for black which was not chosen by any child for happiness (pcolor choices in the anxious group (p>0.05). In the non-anxious group, yellow assumed significant preference over green (pcolor and black, the least-preferred, for happiness emotion, whereas, for sadness emotion, red and green were the most- and least-preferred colors, respectively. Color preference was not affected by the presence of dental anxiety.

Color improvement by irradiation of Curcuma aromatica extract for industrial application

International Nuclear Information System (INIS)

Kim, Jae Kyung; Jo, Cheorun; Hwang, Han Joon; Park, Hyun Jin; Kim, Young Ji; Byun, Myung Woo

2006-01-01

Curcuma species are medicinal herbs with various pharmacological activities. They have a characteristic yellow color and contain curcuminoids which are natural antioxidants. In this study, Curcuma aromatica (Canada) and Curcuma longa (CL) extracts were gamma-irradiated for improving the color, and the irradiation effects on the curcuminoids contents in CA and CL extracts were determined in order to evaluate if CA can replace CL on the market, where the price of CA is 70% lower than the price of CL. The Hunter color L*-values were increased significantly in all the samples with increasing dose, while the a*-values and b*-values decreased, which implies that the color of the CA and CL extracts changed from dark yellow to brighter yellow. Curcuminoids contents of all the samples were evaluated, and CA contains more curcuminoids than CL. These results indicated that irradiation improved the properties of CA for possible industrial use in manufacturing food and cosmetic industrial products

Color improvement by irradiation of Curcuma aromatica extract for industrial application

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Kyung [Radiation Food Science and Biotechnology Team, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup 580-185 (Korea, Republic of); Jo, Cheorun [Radiation Food Science and Biotechnology Team, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup 580-185 (Korea, Republic of); Hwang, Han Joon [Graduate School of Biotechnology, Korea University, 5-1, Anam-dong, Sungbuk-Gu, Seoul 136-701 (Korea, Republic of); Park, Hyun Jin [Graduate School of Biotechnology, Korea University, 5-1, Anam-dong, Sungbuk-Gu, Seoul 136-701 (Korea, Republic of); Kim, Young Ji [Division of Food Beverage and Culinary Arts, Younganm College of Science and Technology, Daegu 705-703 (Korea, Republic of); Byun, Myung Woo [Radiation Food Science and Biotechnology Team, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup 580-185 (Korea, Republic of)]. E-mail: mwbyun@kaeri.re.kr

2006-03-15

Curcuma species are medicinal herbs with various pharmacological activities. They have a characteristic yellow color and contain curcuminoids which are natural antioxidants. In this study, Curcuma aromatica (Canada) and Curcuma longa (CL) extracts were gamma-irradiated for improving the color, and the irradiation effects on the curcuminoids contents in CA and CL extracts were determined in order to evaluate if CA can replace CL on the market, where the price of CA is 70% lower than the price of CL. The Hunter color L*-values were increased significantly in all the samples with increasing dose, while the a*-values and b*-values decreased, which implies that the color of the CA and CL extracts changed from dark yellow to brighter yellow. Curcuminoids contents of all the samples were evaluated, and CA contains more curcuminoids than CL. These results indicated that irradiation improved the properties of CA for possible industrial use in manufacturing food and cosmetic industrial products.

Color improvement by irradiation of Curcuma aromatica extract for industrial application

Science.gov (United States)

Kim, Jae Kyung; Jo, Cheorun; Hwang, Han Joon; Park, Hyun Jin; Kim, Young Ji; Byun, Myung Woo

2006-03-01

Curcuma species are medicinal herbs with various pharmacological activities. They have a characteristic yellow color and contain curcuminoids which are natural antioxidants. In this study, Curcuma aromatica (CA) and Curcuma longa (CL) extracts were gamma-irradiated for improving the color, and the irradiation effects on the curcuminoids contents in CA and CL extracts were determined in order to evaluate if CA can replace CL on the market, where the price of CA is 70% lower than the price of CL. The Hunter color L*-values were increased significantly in all the samples with increasing dose, while the a*-values and b*-values decreased, which implies that the color of the CA and CL extracts changed from dark yellow to brighter yellow. Curcuminoids contents of all the samples were evaluated, and CA contains more curcuminoids than CL. These results indicated that irradiation improved the properties of CA for possible industrial use in manufacturing food and cosmetic industrial products.

P1-13: Color Induction from Surround Color under Interocular Suppression

Directory of Open Access Journals (Sweden)

Ichiro Kuriki

2012-10-01

Full Text Available The effect of surround colors on color appearance is known to subserve color constancy in humans, but how multiple mechanisms in the visual system are involved in this effect is controversial. We used an interocular-suppression technique to examine how the effect occurs at the level higher than the interaction of binocular information. A test color chip (1.7 × 1.7 deg visual angle was presented in a static surround either with continuous-flash suppression in the dominant eye (CFS condition to make the surround inperceptible or without the suppression (no-CFS condition. The surround stimulus was either a Mondrian or a uniform field of the same mean chromaticity. Stimuli were simulated OSA color chips under red, white (D65, or green illuminant color and were presented on a CRT display. Unique yellows were measured by asking the subjects to judge whether the test stimulus appeared reddish or greenish. Two sizes of the surround stimuli (widths of 1 deg and 4 deg were used. Results showed significant shifts in unique yellow even under the CFS conditions, except for the 1 deg uniform-surround condition. Under the no-CFS condition, the shifts showed remarkable difference between subjects, except for the 4 deg Mondrian-surround condition. Interestingly, trends of the shifts showed high consistency within each subject, across conditions. These results indicate that mechanisms at both higher and lower levels than the neuronal site of interocular suppression are involved, and that the color shifts follow each subject's strategy in the higher-order mechanisms when only insufficient clues are available in the surround to estimate illuminant color.

Space Environmental Effects on Colored Coatings and Anodizes

Science.gov (United States)

Kamenetzky, Rachel R.; Finckenor, Miria M.; Vaughn, Jason A.

1999-01-01

Colored coatings and anodizes are used on spacecraft as markers and astronaut visual aids. These materials must be stable in the space environment and withstand atomic oxygen, ultraviolet radiation, particulate radiation, thermal cycling, and high vacuum without significant change in optical and mechanical properties. A variety of colored coatings and anodizes have been exposed to simulated space environments at Marshall Space Flight Center and also actual space environment as part of the Passive Optical Sample Assembly (POSA) - I flight experiment. Colored coatings were developed by AZ Technology, Huntsville, AL, under a NASA contract for International Space Station (ISS). These include yellow, red, blue, and black paints suitable for Extra-Vehicular Activity (EVA) visual aids and ISS emblems. AaChron, Inc., Minneapolis, MN, developed stable colored anodizes, also in yellow, red, blue, and black, for astronaut visual aids. These coatings were exposed in the laboratory to approximately 550 equivalent sun-hours of solar ultraviolet radiation and approximately 1 x 10(exp 21) atoms/sq cm of atomic oxygen in vacuum. The AZ Technology yellow colored coating, designated TMS800IY, and all four AaChron colored anodizes were flown on POSA-I. POSA-I was a Risk Mitigation Experiment for ISS. It was attached to the exterior of the Mir space station docking module by EVA and was exposed for 18 months. The laboratory-simulated space environment, the natural space environment and the unique environment of an orbiting, active space station and their effects on these developmental materials are discussed.

Structural change of cooper pairs in color superconductivity. Crossover from weak coupling to strong coupling

Energy Technology Data Exchange (ETDEWEB)

Abuki, Hiroaki; Hatsuda, Tetsuo [Tokyo Univ., Dept. of Physics, Tokyo (Japan); Itakura, Kazunori [Brookhaven National Laboratory, RIKEN BNL Research Center, Upton, NY (United States)

2002-09-01

The two-flavor color superconductivity is studied over a wide range of baryon density with a single model. We pay a special attention to the spatial-momentum dependence of the gap and to the spatial-structure of Cooper pairs. At extremely high baryon density ({approx}O(10{sup 10} {rho}{sub 0}) with {rho}{sub 0} being the normal nuclear matter density), our model becomes equivalent to the usual perturbative QCD treatment and the gap is shown to have a sharp peak near the Fermi surface due to the weak-coupling nature of QCD. On the other hand, the gap is a smooth function of the momentum at lower densities ({approx}O(10{sup 10} {rho}{sub 0})) due to strong color magnetic and electric interactions. To study the structural change of Cooper pairs from high density to lower density, quark correlation in the color superconductor is studied both in the momentum space and in the coordinate space. The size of the Cooper pair is shown to become comparable to the averaged inter-quark distance at low densities. Also, effects of the momentum-dependent running coupling and the antiquark pairing, which are both small at high density, are shown to be non-negligible at low densities. These features are highly contrasted to the standard BCS superconductivity in metals. (author)

Visual wetness perception based on image color statistics.

Science.gov (United States)

Sawayama, Masataka; Adelson, Edward H; Nishida, Shin'ya

2017-05-01

Color vision provides humans and animals with the abilities to discriminate colors based on the wavelength composition of light and to determine the location and identity of objects of interest in cluttered scenes (e.g., ripe fruit among foliage). However, we argue that color vision can inform us about much more than color alone. Since a trichromatic image carries more information about the optical properties of a scene than a monochromatic image does, color can help us recognize complex material qualities. Here we show that human vision uses color statistics of an image for the perception of an ecologically important surface condition (i.e., wetness). Psychophysical experiments showed that overall enhancement of chromatic saturation, combined with a luminance tone change that increases the darkness and glossiness of the image, tended to make dry scenes look wetter. Theoretical analysis along with image analysis of real objects indicated that our image transformation, which we call the wetness enhancing transformation, is consistent with actual optical changes produced by surface wetting. Furthermore, we found that the wetness enhancing transformation operator was more effective for the images with many colors (large hue entropy) than for those with few colors (small hue entropy). The hue entropy may be used to separate surface wetness from other surface states having similar optical properties. While surface wetness and surface color might seem to be independent, there are higher order color statistics that can influence wetness judgments, in accord with the ecological statistics. The present findings indicate that the visual system uses color image statistics in an elegant way to help estimate the complex physical status of a scene.

Quantitation of chlorophylls and 22 of their colored degradation products in culinary aromatic herbs by HPLC-DAD-MS and correlation with color changes during the dehydration process.

Science.gov (United States)

Lafeuille, Jean-Louis; Lefèvre, Stéphane; Lebuhotel, Julie

2014-02-26

Chlorophylls and their green and olive-brown derivatives were successfully separated from culinary herb extracts by HPLC with photodiode-array and mass spectrometry detection. The method involved a ternary gradient elution and reverse-phase separation conditions capable of resolving 24 different pigments (2 chlorophylls and 22 of their derivatives) of different polarities within 28 min. The method was applied to monitor color changes in 50 samples of culinary aromatic herbs subjected to five different drying treatments. Of the 24 pigments, 14 were key to understanding the differences between the primary degradation pathways of chlorophyll a and chlorophyll b in culinary herbs during drying processes. A color degradation ladder based on the total molar percentage of all the remaining green pigments was also proposed as a tool to measure the impact of drying treatments on aromatic herb visual aspects.

Precision of synesthetic color matching resembles that for recollected colors rather than physical colors.

Science.gov (United States)

Arnold, Derek H; Wegener, Signy V; Brown, Francesca; Mattingley, Jason B

2012-10-01

Grapheme-color synesthesia is an atypical condition in which individuals experience sensations of color when reading printed graphemes such as letters and digits. For some grapheme-color synesthetes, seeing a printed grapheme triggers a sensation of color, but hearing the name of a grapheme does not. This dissociation allowed us to compare the precision with which synesthetes are able to match their color experiences triggered by visible graphemes, with the precision of their matches for recalled colors based on the same graphemes spoken aloud. In six synesthetes, color matching for printed graphemes was equally variable relative to recalled experiences. In a control experiment, synesthetes and age-matched controls either matched the color of a circular patch while it was visible on a screen, or they judged its color from memory after it had disappeared. Both synesthetes and controls were more variable when matching from memory, and the variance of synesthetes' recalled color judgments matched that associated with their synesthetic judgments for visible graphemes in the first experiment. Results suggest that synesthetic experiences of color triggered by achromatic graphemes are analogous to recollections of color.

Color Terms and Color Concepts

Science.gov (United States)

Davidoff, Jules

2006-01-01

In their lead articles, both Kowalski and Zimiles (2006) and O'Hanlon and Roberson (2006) declare a general relation between color term knowledge and the ability to conceptually represent color. Kowalski and Zimiles, in particular, argue for a priority for the conceptual representation in color term acquisition. The complexities of the interaction…

Obtention of tumor volumes in PET images stacks using techniques of colored image segmentation

International Nuclear Information System (INIS)

Vieira, Jose W.; Lopes Filho, Ferdinand J.; Vieira, Igor F.

2014-01-01

This work demonstrated step by step how to segment color images of the chest of an adult in order to separate the tumor volume without significantly changing the values of the components R (Red), G (Green) and B (blue) of the colors of the pixels. For having information which allow to build color map you need to segment and classify the colors present at appropriate intervals in images. The used segmentation technique is to select a small rectangle with color samples in a given region and then erase with a specific color called 'rubber' the other regions of image. The tumor region was segmented into one of the images available and the procedure is displayed in tutorial format. All necessary computational tools have been implemented in DIP (Digital Image Processing), software developed by the authors. The results obtained, in addition to permitting the construction the colorful map of the distribution of the concentration of activity in PET images will also be useful in future work to enter tumors in voxel phantoms in order to perform dosimetric assessments

Food Coloring and Behavior

OpenAIRE

J Gordon Millichap

1994-01-01

The association between the ingestion of tartrazine synthetic food coloring and behavioral change in children referred for assessment of hyperactivity was investigated at the Royal Children’s Hospital, University of Melbourne, Australia.

Color Categories and Color Appearance

Science.gov (United States)

Webster, Michael A.; Kay, Paul

2012-01-01

We examined categorical effects in color appearance in two tasks, which in part differed in the extent to which color naming was explicitly required for the response. In one, we measured the effects of color differences on perceptual grouping for hues that spanned the blue-green boundary, to test whether chromatic differences across the boundary…

Color Memory of University Students: Influence of Color Experience and Color Characteristic

Science.gov (United States)

Bynum, Carlisle; Epps, Helen H.; Kaya, Naz

2006-01-01

The ability to select a previously viewed color specimen from an array of specimens that differ in hue, value, or chroma varies among individuals, and may be related to one's basic color discrimination ability or to prior experience with color. This study investigated short-term color memory of 40 college students, 20 of whom were interior design…

Robust object tracking combining color and scale invariant features

Science.gov (United States)

Zhang, Shengping; Yao, Hongxun; Gao, Peipei

2010-07-01

Object tracking plays a very important role in many computer vision applications. However its performance will significantly deteriorate due to some challenges in complex scene, such as pose and illumination changes, clustering background and so on. In this paper, we propose a robust object tracking algorithm which exploits both global color and local scale invariant (SIFT) features in a particle filter framework. Due to the expensive computation cost of SIFT features, the proposed tracker adopts a speed-up variation of SIFT, SURF, to extract local features. Specially, the proposed method first finds matching points between the target model and target candidate, than the weight of the corresponding particle based on scale invariant features is computed as the the proportion of matching points of that particle to matching points of all particles, finally the weight of the particle is obtained by combining weights of color and SURF features with a probabilistic way. The experimental results on a variety of challenging videos verify that the proposed method is robust to pose and illumination changes and is significantly superior to the standard particle filter tracker and the mean shift tracker.

Memory for color reactivates color processing region.

Science.gov (United States)

Slotnick, Scott D

2009-11-25

Memory is thought to be constructive in nature, where features processed in different cortical regions are synthesized during retrieval. In an effort to support this constructive memory framework, the present functional magnetic resonance imaging study assessed whether memory for color reactivated color processing regions. During encoding, participants were presented with colored and gray abstract shapes. During retrieval, old and new shapes were presented in gray and participants responded 'old-colored', 'old-gray', or 'new'. Within color perception regions, color memory related activity was observed in the left fusiform gyrus, adjacent to the collateral sulcus. A retinotopic mapping analysis indicated this activity occurred within color processing region V8. The present feature specific evidence provides compelling support for a constructive view of memory.

The effect of different shades of specific luting agents and IPS empress ceramic thickness on overall color.

Science.gov (United States)

Terzioğlu, Hakan; Yilmaz, Burak; Yurdukoru, Bengul

2009-10-01

The color stability of both porcelain and luting materials is very important for the esthetics of laminate veneers and all-ceramic crowns. The purpose of this study was to determine the effect of different shades of resin-based luting cement and the thickness of IPS Empress ceramics on the final color of the restorations. Resin-based dual-polymerized composite cement in two different shades (RelyX ARC) and ceramic disks of different thicknesses were selected for the study. Forty specimens (ten each of four different thicknesses: 0.5 mm, 1 mm, 2 mm, and 3 mm) were used for the evaluation. Initial specimen color parameters were determined in a Commission Internationale de l'Eclairage L*a*b* color order system with a colorimeter. Two different shades of the cement were prepared as polymerized layers and applied to one face of the specimens in order. Color changes were calculated between baseline color measurements and measurements after cementation. Color difference data were analyzed statistically. All specimens showed a significant color shift (DE > 3.7) after cementation regardless of the cement shade. However, the differences in the cement shade did not significantly affect the final color of the ceramic specimens for any thickness, and color shifts were not perceivable between the different shades of cement. (Int J Periodontics Restorative Dent 2009;29:499-505.).

Health risks occurring when color is percepted under led lighting

Directory of Open Access Journals (Sweden)

V.A. Kaptsov

2017-06-01

Full Text Available The article deals with problems of color perception under LED lighting. We revealed that inadequate perception of a signal color by a driver led to greater risks of transport accidents. We reviewed both Jung-Helmholtz three-color hypothesis and a modern one based on fiber-optical approach to functioning of "Mueller cells and cones" system. We made an attempt to explain a number of effects related to visibility curves and time delays when defining color of light signals. Our research on assessing influence exerted by LED lighting on functional state and working capacity of railway workers during which we applied occupational selection techniques revealed negative changes. We proved there was a decrease in functional resistance to color sense between red and green signals as well as longer response time for complicated sight-motor reaction and significant decrease in readiness to emergency actions (resistance to monotony in examined individuals. The article also contains data on time peculiarities which are characteristic for defining signals color in relation to red signal (650 nm. We showed that when red color LEDs with wave length much shorter than 650 nm were used in signaling devices it caused risks of inadequate color detection, longer reaction to inhibiting signals, and greater possibility of transport accidents and negative events in everyday life. These peculiarities should be taken into account when designing traffic lights and other signaling devices which provide transport safety. We also proved that signaling traffic lights for transport systems should be designed allowing for physiology of color perception by a human visual analyzer; application of LEDs with wave length shorter than 650 nm should be absolutely excluded

The fading of irradiated blue-colored pearls

International Nuclear Information System (INIS)

Okamoto, Shinichi

1982-01-01

The fading of irradiated and natural blue-colored pearls was investigated in this experiment. Thirty natural blue-colored pearls and sixty irradiated blue-colored pearls were used. Some of them were placed at a light position of RT. Another pearls were placed at a dark position of 50 0 C. The irradiated pearls placed at a light position of RT didn't show remarkable fading in their color in 294 days. But the natural blue-colored pearls showed a little recovery from 4% to 8% in reflection factors in 223 days at RT. The irradiated pearls placed at a dark position of 50 0 C showed the recovery from 9% to 14% in 264 days independently of irradiation times. The natural blue-colored pearls also showed the bleaching from 5% to 10% in reflection factor in 86 days at 50 0 C. Both irradiated and natural blue-colored pearls hardly showed their remarkable changes in their chromaticities independently of temperatures. (author)

Development of colored alumilite dosimeter

Energy Technology Data Exchange (ETDEWEB)

Obara, Kenjiro; Shibanuma, Kiyoshi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Yagi, Toshiaki [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Yokoo, Noriko [Radiation Application Development Association, Tokai, Ibaraki (Japan)

2003-03-01

In the ITER (International Thermonuclear Experimental Reactor), in-vessel components such as blanket and divertor, which are installed in the vacuum vessel of the ITER, are maintained by remote handling equipment (RH equipment). The RH equipment for maintenance is operated under sever environmental conditions, such as high temperature (50{approx}100 degC), high gamma-ray radiation ({approx}1 kGy/h) in an atmosphere of inert gas or vacuum; therefore many components of the RH equipment must have a suitable radiation resistance efficiency for long time operation (10{approx}100 MGy). Typical components of the RH equipment have been extensively tested under an intensive gamma-ray radiation. Monitoring of the radiation dose of the components of the RH equipment is essential to control the operation period of the RH equipment considering radiation resistance. However, the maximum measurable radiation dose of the conventional dosimeters, such as ionization chamber, liquid, glass and plastic dosimeters are limited to be approximately 1MGy which is too low to monitor the RH equipment for the ITER. In addition, these conventional dosimeters do not involve sufficient radiation resistance against the high gamma-ray radiation as well as are not easy handling and low cost. Based on the above backgrounds, a new dosimeter with bleaching of an azo group dye to be applied to a radiation monitor has been developed for high gamma-ray radiation use. The colored alumilite dosimeter is composed of the azo group dye (-N=N-) in an anodic oxidation layer of aluminum alloy (Al{sub 2}O{sub 3}). It can monitor the radiation dose by measuring the change of the bleaching of azo dye in the Al{sub 2}O{sub 3} layer due to gamma-ray irradiation. The degree of bleaching is measured as the change of hue (color) and brightness based on the Munsell's colors with a three dimensional universe using spectrophotometer. In the tests, the dependencies such as colors, anodized layer thickness, type of azo

Long-term microwaving of denture base materials: effects on dimensional, color and translucency stability

Directory of Open Access Journals (Sweden)

Nick POLYCHRONAKIS

2018-06-01

Full Text Available Abstract While the combined effect of microwave irradiation with cleansing solutions on denture base materials has been investigated, the effects of only using microwave irradiation and, more importantly, in a long-term basis, was not studied yet. Objective The purpose of this study was to evaluate the effect of a long-term repeated microwaving on the dimensional, color and translucency stability of acrylic and polyamide denture base materials. Material and Methods Thirty two specimens (32 mm x 10 mm x 2.5 mm from polyamide (Valplast and PMMA (Vertex Rapid Simplified denture base materials were made. Eight specimens from each material were immersed in distilled water (control and 8 were subjected to microwave exposure at 450 W for 3 minutes for a period simulating 224 days of daily disinfection. Linear dimension, color change (ΔE* and translucency parameter (TP were measured at baseline and after certain intervals up to 224 cycles of immersion, using a digital calliper and a portable colorimeter. The results were analysed using two-way repeated measures ANOVA to estimate possible differences among predetermined cycles and material type. Regression analysis was also performed to estimate the trend of changes with time. Statistical evaluations performed at a significance level of 5%. Results Data analysis showed significant changes in length at baseline with an increasing number of cycles (p0.05. TP decreased similarly in both materials following microwave action but in a significantly higher level for Valplast (p<0.001. Conclusions The results indicated that long-term repeated microwaving affects linear dimensional, color and translucency changes of both materials. Differences between PMMA and polyamide material were noted only in dimension and translucency changes.

Joint effects of emotion and color on memory.

Science.gov (United States)

Kuhbandner, Christof; Pekrun, Reinhard

2013-06-01

Numerous studies have shown that memory is enhanced for emotionally negative and positive information relative to neutral information. We examined whether emotion-induced memory enhancement is influenced by low-level perceptual attributes such as color. Because in everyday life red is often used as a warning signal, whereas green signals security, we hypothesized that red might enhance memory for negative information and green memory for positive information. To capture the signaling function of colors, we measured memory for words standing out from the context by color, and manipulated the color and emotional significance of the outstanding words. Making words outstanding by color strongly enhanced memory, replicating the well-known von Restorff effect. Furthermore, memory for colored words was further increased by emotional significance, replicating the memory-enhancing effect of emotion. Most intriguingly, the effects of emotion on memory additionally depended on color type. Red strongly increased memory for negative words, whereas green strongly increased memory for positive words. These findings provide the first evidence that emotion-induced memory enhancement is influenced by color and demonstrate that different colors can have different functions in human memory.

Surface properties and color stability of an acrylic resin combined with an antimicrobial polymer

Directory of Open Access Journals (Sweden)

Ana Carolina Pero

Full Text Available INTRODUCTION: The occurrence of stomatitis is common since the surface characteristics of the dentures may act as reservoirs for microorganisms and have the potential to support biofilm formation. PURPOSE: To assess the surface properties (wettability/roughness and color stability of an acrylic resin combined with the antimicrobial polymer poly (2-tert-butylaminoethyl methacrylate (PTBAEMA. MATERIAL AND METHOD: Thirty disc-shaped specimens of an acrylic resin (Lucitone 550 were divided into three groups: 0% (control; 5% and 10% PTBAEMA. Surface roughness values (Ra were measured using a profilometer and wettability was determined through contact angle measurements using a goniometer and deionized water as a test liquid. Color data were measured with a spectrophotometer. Kruskal-Wallis and Dunn's test were used to compare roughness values. Wettability data were analyzed using ANOVA and Tukey's test. Color data were compared using the Student's t-test and ∆E values were classified according to the National Bureau of Standards (NBS. All statistical analyses were performed considering α=.05. RESULT: Significant differences (p<.05 were detected among the groups for roughness, wettability and color stability. According to the NBS, the color changes obtained in the 5% and 10% PTBAEMA groups were "appreciable" and "much appreciable", respectively. CONCLUSION: It could be concluded that PTBAEMA incorporation in an acrylic resin increased the roughness and wettability of surfaces and produced color changes with clinical relevance.

Correlation between three color coordinates of human teeth

Science.gov (United States)

Lee, Yong-Keun

2014-11-01

The objective was to determine whether there were significant correlations in the three color coordinates within each of two color coordinate systems, such as the Commission Internationale de l'Eclairage (CIE) L*a*b* system, and the lightness, chroma, and hue angle system, of human vital teeth. The color of six maxillary and six mandibular anterior teeth was measured by the Shade Vision System. Pearson correlations between each pair of the color coordinates were determined (α=0.01). The influence of two color coordinates on the other color coordinate was determined with a multiple regression analysis (α=0.01). Based on correlation analyses, all the color coordinate pairs showed significant correlations except for the chroma and hue angle pair. The CIE L* was negatively correlated with the CIE a*, b*, and chroma, but positively correlated with the hue angle. The CIE a* was positively correlated with the CIE b* and chroma. Tooth color coordinates were correlated each other. Lighter teeth were less chromatic both in the CIE a* and b* coordinates. Therefore, it was postulated that the three color coordinates of human teeth were harmonized within certain color attribute ranges, and a lack of correlations in these coordinates might indicate external/internal discolorations and/or anomalies of teeth.

Using Single Colors and Color Pairs to Communicate Basic Tastes II: Foreground-Background Color Combinations.

Science.gov (United States)

Woods, Andy T; Marmolejo-Ramos, Fernando; Velasco, Carlos; Spence, Charles

2016-01-01

People associate basic tastes (e.g., sweet, sour, bitter, and salty) with specific colors (e.g., pink or red, green or yellow, black or purple, and white or blue). In the present study, we investigated whether a color bordered by another color (either the same or different) would give rise to stronger taste associations relative to a single patch of color. We replicate previous findings, highlighting the existence of a robust crossmodal correspondence between individual colors and basic tastes. On occasion, color pairs were found to communicate taste expectations more consistently than were single color patches. Furthermore, and in contrast to a recent study in which the color pairs were shown side-by-side, participants took no longer to match the color pairs with tastes than the single colors (they had taken twice as long to respond to the color pairs in the previous study). Possible reasons for these results are discussed, and potential applications for the results, and for the testing methodology developed, are outlined.

Cortical response to categorical color perception in infants investigated by near-infrared spectroscopy.

Science.gov (United States)

Yang, Jiale; Kanazawa, So; Yamaguchi, Masami K; Kuriki, Ichiro

2016-03-01

Perceptual color space is continuous; however, we tend to divide it into only a small number of categories. It is unclear whether categorical color perception is obtained solely through the development of the visual system or whether it is affected by language acquisition. To address this issue, we recruited prelinguistic infants (5- to 7-mo-olds) to measure changes in brain activity in relation to categorical color differences by using near-infrared spectroscopy (NIRS). We presented two sets of geometric figures to infants: One set altered in color between green and blue, and the other set altered between two different shades of green. We found a significant increase in hemodynamic responses during the between-category alternations, but not during the within-category alternations. These differences in hemodynamic response based on categorical relationship were observed only in the bilateral occipitotemporal regions, and not in the occipital region. We confirmed that categorical color differences yield behavioral differences in infants. We also observed comparable hemodynamic responses to categorical color differences in adults. The present study provided the first evidence, to our knowledge, that colors of different categories are represented differently in the visual cortex of prelinguistic infants, which implies that color categories may develop independently before language acquisition.

Stroop effects in Alzheimer's disease: selective attention speed of processing, or color-naming? A meta-analysis.

Science.gov (United States)

Ben-David, Boaz M; Tewari, Anita; Shakuf, Vered; Van Lieshout, Pascal H H M

2014-01-01

Selective attention, an essential part of daily activity, is often impaired in people with Alzheimer's disease (AD). Usually, it is measured by the color-word Stroop test. However, there is no universal agreement whether performance on the Stroop task changes significantly in AD patients; or if so, whether an increase in Stroop effects reflects a decrease in selective attention, a slowing in generalized speed of processing (SOP), or is the result of degraded color-vision. The current study investigated the impact of AD on Stroop performance and its potential sources in a meta-analysis and mathematical modeling of 18 studies, comparing 637 AD patients with 977 healthy age-matched participants. We found a significant increase in Stroop effects for AD patients, across studies. This AD-related change was associated with a slowing in SOP. However, after correcting for a bias in the distribution of latencies, SOP could only explain a moderate portion of the total variance (25%). Moreover, we found strong evidence for an AD-related increase in the latency difference between naming the font-color and reading color-neutral stimuli (r2 = 0.98). This increase in the dimensional imbalance between color-naming and word-reading was found to explain a significant portion of the AD-related increase in Stroop effects (r2 = 0.87), hinting on a possible sensory source. In conclusion, our analysis highlights the importance of controlling for sensory degradation and SOP when testing cognitive performance and, specifically, selective attention in AD patients. We also suggest possible measures and tools to better test for selective attention in AD.

Adaptive shell color plasticity during the early ontogeny of an intertidal keystone snail.

Science.gov (United States)

Manríquez, Patricio H; Lagos, Nelson A; Jara, María Elisa; Castilla, Juan Carlos

2009-09-22

We report a mechanism of crypsis present during the vulnerable early post-metamorphic ontogeny (Concholepas concholepas, a rocky shore keystone predator characteristic of the southeastern Pacific coast. In the field, we found a significant occurrence (>95%) of specimens bearing patterns of shell coloration (dark or light colored) that matched the background coloration provided by patches of Concholepas' most abundant prey (mussels or barnacles respectively). The variation in shell color was positively associated with the color of the most common prey (r = 0.99). In laboratory experiments, shell coloration of C. concholepas depended on the prey-substrate used to induce metamorphosis and for the post-metamorphic rearing. The snail shell color matched the color of the prey offered during rearing. Laboratory manipulation experiments, switching the prey during rearing, showed a corresponding change in snail shell color along the outermost shell edge. As individuals grew and became increasingly indistinguishable from the surrounding background, cryptic individuals had higher survival (71%) than the non cryptic ones (4%) when they were reared in the presence of the predatory crab Acanthocyclus hassleri. These results suggest that the evolution of shell color plasticity during the early ontogeny of C. concholepas, depends on the color of the more abundant of the consumed prey available in the natural habitat where settlement has taken place; this in turn has important consequences for their fitness and survivorship in the presence of visual predators.

Color preference and familiarity in performance on brand logo recall.

Science.gov (United States)

Huang, Kuo-Chen; Lin, Chin-Chiuan; Chiang, Shu-Ying

2008-10-01

Two experiments assessed effects of color preference and brand-logo familiarity on recall performance. Exp. 1 explored the color preferences, using a forced-choice technique, of 189 women and 63 men, Taiwanese college students ages 18 to 20 years (M = 19.4, SD = 1.5). The sequence of the three most preferred colors was white, light blue, and black and of the three least preferred colors was light orange, dark violet, and dark brown. Exp. 2 investigated the effects of color preference based on the results of Exp. 1 and brand-logo familiarity on recall. A total of 27 women and 21 men, Taiwanese college students ages 18 to 20 years (M = 19.2, SD = 1.2) participated. They memorized a list of 24 logos (four logos shown in six colors) and then performed sequential recall. Analyses showed color preference significantly affected recall accuracy. Accuracy for high color preference was significantly greater than that for low preferences. Results showed no significant effects of brand-logo familiarity or sex on accuracy. In addition, the interactive effect of color preference and brand-logo familiarity on accuracy was significant. These results have implications for the design of brand logos to create and sustain memory of brand images.

Hourly changes in sea surface salinity in coastal waters recorded by Geostationary Ocean Color Imager

Science.gov (United States)

Liu, Rongjie; Zhang, Jie; Yao, Haiyan; Cui, Tingwei; Wang, Ning; Zhang, Yi; Wu, Lingjuan; An, Jubai

2017-09-01

In this study, we monitored hourly changes in sea surface salinity (SSS) in turbid coastal waters from geostationary satellite ocean color images for the first time, using the Bohai Sea as a case study. We developed a simple multi-linear statistical regression model to retrieve SSS data from Geostationary Ocean Color Imager (GOCI) based on an in situ satellite matched-up dataset (R2 = 0.795; N = 41; Range: 26.4 to 31.9 psμ). The model was then validated using independent continuous SSS measurements from buoys, with the average percentage difference of 0.65%. The model was applied to GOCI images from the dry season during an astronomical tide to characterize hourly changes in SSS in the Bohai Sea. We found that the model provided reasonable estimates of the hourly changes in SSS and that trends in the modeled and measured data were similar in magnitude and direction (0.43 vs 0.33 psμ, R2 = 0.51). There were clear diurnal variations in the SSS of the Bohai Sea, with a regional average of 0.455 ± 0.079 psμ (0.02-3.77 psμ). The magnitude of the diurnal variations in SSS varied spatially, with large diurnal variability in the nearshore, particularly in the estuary, and small variability in the offshore area. The model for the riverine area was based on the inverse correlation between SSS and CDOM absorption. In the offshore area, the water mass of the North Yellow Sea, characterized by high SSS and low CDOM concentrations, dominated. Analysis of the driving mechanisms showed that the tidal current was the main control on hourly changes in SSS in the Bohai Sea.

Colorism/Neo-Colorism

Science.gov (United States)

Snell, Joel

2017-01-01

There are numerous aspects to being non-Caucasian that may not be known by Whites. Persons of color suggest folks who are African, South Americans, Native Americans, Biracial, Asians and others. The question is what do these individuals feel relative to their color and facial characteristics. Eugene Robinson suggest that the future favorable color…

Effects of hue, saturation, and brightness on preference: a study on Goethe's color circle with RGB color space

Science.gov (United States)

Camgoz, Nilgun; Yener, Cengiz

2002-06-01

In order to investigate preference responses for foreground- background color relationships, 85 university undergraduates in Ankara, Turkey, viewed 6 background colors (red, yellow, green, cyan, blue, and magenta) on which color squares of differing hues, saturations, and brightnesses were presented. All the background colors had maximum brightness (100%) and maximum saturation (100%). Subjects were asked to show the color square they preferred on the presented background color viewed through a computer monitor. The experimental setup consisted of a computer monitor located in a windowless room, illuminated with cove lighting. The findings of the experiment show that the brightness 100%- saturation 100% range is significantly preferred the most (p-value < 0.03). Thus, color squares that are most saturated and brightest are preferred on backgrounds of most saturated and brightest colors. Regardless of the background colors viewed, the subjects preferred blue the most (p-value < 0.01). Findings of the study are also discussed with pertinent research on the field. Through this analysis, an understanding of foreground-background color relationships in terms of preference is sought.

A Fuzzy Logic-Based Video Subtitle and Caption Coloring System

Directory of Open Access Journals (Sweden)

Mohsen Davoudi

2012-01-01

Full Text Available An approach has been proposed for automatic adaptive subtitle coloring using fuzzy logic-based algorithm. This system changes the color of the video subtitle/caption to “pleasant” color according to color harmony and the visual perception of the image background colors. In the fuzzy analyzer unit, using RGB histograms of background image, the R, G, and B values for the color of the subtitle/caption are computed using fixed fuzzy IF-THEN rules fully driven from the color harmony theories to satisfy complementary color and subtitle-background color harmony conditions. A real-time hardware structure has been proposed for implementation of the front-end processing unit as well as the fuzzy analyzer unit.

The Effect of Fluoridated and Non Fluoridated Mouth Washes on Color Stability of Different Aesthetic Arch Wires At Different Time Intervals (An in Vitro Study

Directory of Open Access Journals (Sweden)

Lubna Maky Hussein

2018-01-01

Full Text Available Background:The color stability of aesthetic arch wires is an important factor in the success of an aesthetic orthodontic treatment, but the color of these arch wires tends to change with time.This study was performed to assess the effect of two types of mouth washes on the color  stability of different types of aesthetic arch wires at different time intervals. Materials and methods:Four brands of nickel titanium coated aesthetic arch wires were used: epoxy coated (Orthotechnology and G&H and Teflon coated (Dany and Hubit.Thirty six samples were prepared, each sample contains ten halves of the aesthetic arch wires. They were divided into three groups according to the immersion media (distilled water as a control media, Listerine with fluoride and Listerine without fluoride and immersed for 30 seconds twice daily according to manufacturer's instructions to measure color change after 1 week, 3 weeks and 6 weeks by using spectrophotometer VITA Easyshade Compact according to Commission Internationale de l’Eclairage L*a*b* color space system. Results:It was found that there were highly significant differences in color change values of aesthetic arch wires among all immersion media at different time intervals and color change value increases as the time of immersion increases.Additionally, Listerine with fluoride mouth wash caused higher color change values of aesthetic arch wires than Listerine without fluoride and Hubit aesthetic arch wires were the least color stable while Orthotechnology aesthetic arch wires were the most color stable. Conclusions: We can conclude that the daily use of Listerine mouth washes could affect on the color stability of aesthetic arch wires. Although all tested aesthetic arch wires revealed color changes at variable degrees but some of these changes were not  visible and the others were clinically acceptable while the remaining were clinically unacceptable.

Luminance contours can gate afterimage colors and "real" colors.

Science.gov (United States)

Anstis, Stuart; Vergeer, Mark; Van Lier, Rob

2012-09-06

It has long been known that colored images may elicit afterimages in complementary colors. We have already shown (Van Lier, Vergeer, & Anstis, 2009) that one and the same adapting image may result in different afterimage colors, depending on the test contours presented after the colored image. The color of the afterimage depends on two adapting colors, those both inside and outside the test. Here, we further explore this phenomenon and show that the color-contour interactions shown for afterimage colors also occur for "real" colors. We argue that similar mechanisms apply for both types of stimulation.

A laboratory evaluation of color video monitors

Energy Technology Data Exchange (ETDEWEB)

Terry, P.L.

1993-07-01

Sandia National Laboratories has considerable experience with monochrome video monitors used in alarm assessment video systems. Most of these systems, used for perimeter protection, were designed to classify rather than to identify intruders. There is a growing interest in the identification function of security video systems for both access control and insider protection. Because color video technology is rapidly changing and because color information is useful for identification purposes, Sandia National Laboratories established a program to evaluate the newest relevant color video equipment. This report documents the evaluation of an integral component, color monitors. It briefly discusses a critical parameter, dynamic range, details test procedures, and evaluates the results.

A laboratory evaluation of color video monitors

International Nuclear Information System (INIS)

Terry, P.L.

1993-07-01

Sandia National Laboratories has considerable experience with monochrome video monitors used in alarm assessment video systems. Most of these systems, used for perimeter protection, were designed to classify rather than to identify intruders. There is a growing interest in the identification function of security video systems for both access control and insider protection. Because color video technology is rapidly changing and because color information is useful for identification purposes, Sandia National Laboratories established a program to evaluate the newest relevant color video equipment. This report documents the evaluation of an integral component, color monitors. It briefly discusses a critical parameter, dynamic range, details test procedures, and evaluates the results

Influences of Thermo-Vacuum Treatment on Colors and Chemical Compositions of Alder Birch Wood

Directory of Open Access Journals (Sweden)

Yan Yang

2015-10-01

Full Text Available With high temperature-heat treatment, the dimensional stability and durability of wood is improved and wood color is darkened as well. In this paper, alder birch wood (Betula alnoides was treated by the Thermo-Vacuum Treatment (TVT. The changes of wood color parameters and the chemical composition were determined by the CIE1976 L*a*b* method and the chemical analysis method, respectively. The results were revealed as follows: (1 A lower value of lightness, L*, and a higher value of total color difference, △E*, were obtained at the higher heat-treatment temperatures and longer treatment time. (2 The higher the heat-treatment temperatures and the longer the heat-treatment times were, the lower the contents of hemicellulose and cellulose were and the higher the content of lignin was. Moreover, Fourier Transform infrared spectroscopy (FTIR analysis demonstrated that the characteristic absorption peaks of cellulose, hemicellulose, and lignin diminished. The acetylation reaction of hemicellulose and the degradation reaction of groups of lignin side chain occurred during TVT. (3 TVT degraded the chemical composition of cell walls, which resulted in further changes of the wood color. A significant correlation existed between the differences of color indices and the differences of the chemical composition after TVT.

METAPHOR OF COLORS IN INDONESIAN

Directory of Open Access Journals (Sweden)

I Dewa Putu Wijana

2015-06-01

Full Text Available This brief article deals with the use of Indonesian words referring to colors for creating metaphorical expressions. All data presented are collected from various sources, such as Kamus Besar Bahasa Indonesia (Indonesian Standard Dictionary, and added with data obtained from Oxford Advanced Leaner’s Dictionary, Indonesian proverb book, encyclopedia, terminology collection book, poetry anthology, song lyrics, and data of the author’s own creation as an Indonesian native speaker. Set aside from their literal meanings, the metaphorically used color words are collected and classified into two categories, i.e. achromatic and chromatic colors. Then, their universalities are determined by comparing them with English color metaphors. Finally the existence of specific Indonesian color metaphors are identified by correlating them with extra linguistic factors, such as environment, history, religion, politic and other socio cultural activities. A careful analysis on the data shows that there is nearly no significant difference in metaphorical uses of achromatic colors in English and Indonesian. However, despite universal nuances of chromatic color metaphors, some specific ones emerge due to various external factors, such as environment, education, history, politic, law, religion, literature, and other socio cultural facts that are specifically found and practiced in Indonesia.

Using Single Colors and Color Pairs to Communicate Basic Tastes II: Foreground–Background Color Combinations

Science.gov (United States)

Marmolejo-Ramos, Fernando; Velasco, Carlos; Spence, Charles

2016-01-01

People associate basic tastes (e.g., sweet, sour, bitter, and salty) with specific colors (e.g., pink or red, green or yellow, black or purple, and white or blue). In the present study, we investigated whether a color bordered by another color (either the same or different) would give rise to stronger taste associations relative to a single patch of color. We replicate previous findings, highlighting the existence of a robust crossmodal correspondence between individual colors and basic tastes. On occasion, color pairs were found to communicate taste expectations more consistently than were single color patches. Furthermore, and in contrast to a recent study in which the color pairs were shown side-by-side, participants took no longer to match the color pairs with tastes than the single colors (they had taken twice as long to respond to the color pairs in the previous study). Possible reasons for these results are discussed, and potential applications for the results, and for the testing methodology developed, are outlined. PMID:27708752

New generation of color bonding: A comparative in vitro study

Directory of Open Access Journals (Sweden)

Rajkumar Maurya

2011-01-01

Statistical Analysis: Comparison of the mean rank among the groups was done by Kruskal-Wallis one-way analysis of variance (ANOVA. To determine the mean difference among groups, the Mann-Whitney test with Bon Ferroni adjustment was applied. Observations: It was observed that light-cure conventional composite resin with the conventional etchant group had the highest and glass ionomer resin adhesive had the lowest shear bond strength. There was no statistically significant difference between conventional composite used with conventional etchant and color-changing composite resin used with conventional etchant or with self-etch primer. Conclusion: Considering the advantages of a color-changing composite and self-etch primer especially in patients having high DMFT scores or physically and mentally compromised patients unable to maintain their hygiene properly, it was concluded in the present study that it would be the most suitable material for direct bonding.

Color blindness among multiple sclerosis patients in Isfahan.

Science.gov (United States)

Shaygannejad, Vahid; Golabchi, Khodayar; Dehghani, Alireza; Ashtari, Fereshteh; Haghighi, Sepehr; Mirzendehdel, Mahsa; Ghasemi, Majid

2012-03-01

Multiple sclerosis (MS) is a disease of young and middle aged individuals with a demyelinative axonal damage nature in central nervous system that causes various signs and symptoms. As color vision needs normal function of optic nerve and macula, it is proposed that MS can alter it via influencing optic nerve. In this survey, we evaluated color vision abnormalities and its relationship with history of optic neuritis and abnormal visual evoked potentials (VEPs) among MS patients. The case group was included of clinically definitive MS patients and the same number of normal population was enrolled as the control group. Color vision of all the participants was evaluated by Ishihara test and then visual evoked potential (VEPs) and history of optic neuritis (ON) was assessed among them. Then, frequency of color blindness was compared between the case and the control group. Finally, color blinded patients were compared to those with the history of ON and abnormal VEPs. 63 MS patients and the same number of normal populations were enrolled in this study. 12 patients had color blindness based on the Ishihara test; only 3 of them were among the control group, which showed a significant different between the two groups (P = 0.013). There was a significant relationship between the color blindness and abnormal VEP (R = 0.53, P = 0.023) but not for the color blindness and ON (P = 0.67). This study demonstrates a significant correlation between color blindness and multiple sclerosis including ones with abnormal prolonged VEP latencies. Therefore, in individuals with acquired color vision impairment, an evaluation for potentially serious underlying diseases like MS is essential.

Color blindness among multiple sclerosis patients in Isfahan

Directory of Open Access Journals (Sweden)

Vahid Shaygannejad

2012-01-01

Full Text Available Background: Multiple sclerosis (MS is a disease of young and middle aged individuals with a demyelinative axonal damage nature in central nervous system that causes various signs and symptoms. As color vision needs normal function of optic nerve and macula, it is proposed that MS can alter it via influencing optic nerve. In this survey, we evaluated color vision abnormalities and its relationship with history of optic neuritis and abnormal visual evoked potentials (VEPs among MS patients. Materials and Methods: The case group was included of clinically definitive MS patients and the same number of normal population was enrolled as the control group. Color vision of all the participants was evaluated by Ishihara test and then visual evoked potential (VEPs and history of optic neuritis (ON was assessed among them. Then, frequency of color blindness was compared between the case and the control group. Finally, color blinded patients were compared to those with the history of ON and abnormal VEPs. Results: 63 MS patients and the same number of normal populations were enrolled in this study. 12 patients had color blindness based on the Ishihara test; only 3 of them were among the control group, which showed a significant different between the two groups (P = 0.013. There was a significant relationship between the color blindness and abnormal VEP (R = 0.53, P = 0.023 but not for the color blindness and ON (P = 0.67. Conclusions: This study demonstrates a significant correlation between color blindness and multiple sclerosis including ones with abnormal prolonged VEP latencies. Therefore, in individuals with acquired color vision impairment, an evaluation for potentially serious underlying diseases like MS is essential.

Working Memory Is Related to Perceptual Processing: A Case from Color Perception

Science.gov (United States)

Allen, Elizabeth C.; Beilock, Sian L.; Shevell, Steven K.

2011-01-01

We explored the relation between individual differences in working memory (WM) and color constancy, the phenomenon of color perception that allows us to perceive the color of an object as relatively stable under changes in illumination. Successive color constancy (measured by first viewing a colored surface under a particular illumination and…

Color enhancement in multispectral image of human skin

Science.gov (United States)

Mitsui, Masanori; Murakami, Yuri; Obi, Takashi; Yamaguchi, Masahiro; Ohyama, Nagaaki

2003-07-01

Multispectral imaging is receiving attention in medical color imaging, as high-fidelity color information can be acquired by the multispectral image capturing. On the other hand, as color enhancement in medical color image is effective for distinguishing lesion from normal part, we apply a new technique for color enhancement using multispectral image to enhance the features contained in a certain spectral band, without changing the average color distribution of original image. In this method, to keep the average color distribution, KL transform is applied to spectral data, and only high-order KL coefficients are amplified in the enhancement. Multispectral images of human skin of bruised arm are captured by 16-band multispectral camera, and the proposed color enhancement is applied. The resultant images are compared with the color images reproduced assuming CIE D65 illuminant (obtained by natural color reproduction technique). As a result, the proposed technique successfully visualizes unclear bruised lesions, which are almost invisible in natural color images. The proposed technique will provide support tool for the diagnosis in dermatology, visual examination in internal medicine, nursing care for preventing bedsore, and so on.

Color adaptation induced from linguistic description of color.

Directory of Open Access Journals (Sweden)

Liling Zheng

Full Text Available Recent theories propose that language comprehension can influence perception at the low level of perceptual system. Here, we used an adaptation paradigm to test whether processing language caused color adaptation in the visual system. After prolonged exposure to a color linguistic context, which depicted red, green, or non-specific color scenes, participants immediately performed a color detection task, indicating whether they saw a green color square in the middle of a white screen or not. We found that participants were more likely to perceive the green color square after listening to discourses denoting red compared to discourses denoting green or conveying non-specific color information, revealing that language comprehension caused an adaptation aftereffect at the perceptual level. Therefore, semantic representation of color may have a common neural substrate with color perception. These results are in line with the simulation view of embodied language comprehension theory, which predicts that processing language reactivates the sensorimotor systems that are engaged during real experience.

Color formation on irradiated polystyrene by electrons beam; Formacao de cor no poliestireno irradiado com feixes de eletrons

Energy Technology Data Exchange (ETDEWEB)

Nardi, Daniela T.; Guedes, Selma M.L. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: smguedes@ipen.br

2005-07-01

The color formation on national and commercial polystyrene (PS) irradiated by electrons beam was investigated in function of dose (0-150 kGy), post-irradiation time (0-31 days) and heating by colorimetry (CIELab), electron spectroscopy resonance (RPE) and photoacoustic infrared spectroscopy (FTIR-PAS). Visually or by colorimetric parameters the radiation became the PS yellow and dark which intensified by increase the dose and disappeared after the post-irradiation time. Variations of green/red colors were insignificant. After post irradiation time of 30 days (150 kGy) or the heating (150 kGy) both yellow color and darkening decreased significantly showing the unstable color centers formation during the irradiation. The RPE spectra indicated that the radicals can be responsible by the formation of these color centers but there can not be responsible s by stable color centers. The FTIR-PAS spectra did not show the presence of different functional groups after irradiation. The PS studied can be radiosterilized (25 kGy) without significant colorimetric changes because it is radioresistant. (author)

Cryptic color change in a crab spider (Misumena vatia): identification and quantification of precursors and ommochrome pigments by HPLC.

Science.gov (United States)

Riou, Mickaël; Christidès, Jean-Philippe

2010-04-01

Mimicry is used widely by arthropods to survive in a hostile environment. Often mimicry is associated with the production of chemical compounds such as pigments. In crab spiders, the change of color is based on a complex physiological process that still is not understood. The aim of this study was to identify and quantify the ommochrome pigments and precursors responsible for the color change in the mimetic crab spider Misumena vatia (Thomisidae). A modified high performance reverse phase ion-pair chromatography technique enabled us to separate and quantify the ommochrome pigments, their precursors, and related metabolites in individual spiders. Compounds such as tryptophan, kynurenine, and kynurenic acid occurred only or mainly in white crab spiders. In contrast, compounds such as 3-hydroxy-kynurenine, xanthommatin, and ommatin D occurred only or mainly in yellow crab spiders. Factor analysis ranked the different color forms in accordance with their metabolites. The biochemical results enabled us to associate the different phases of formation of pigment granules with specific metabolites. Yellow crab spiders contain many unknown ommochrome-like compounds not present in white crab spiders. We also found large quantities of decarboxylated xanthommatin, whose role as precursor of new pathways in ommochrome synthesis needs to be assessed. The catabolism of ommochromes, a process occurring when spiders revert from yellow to white, warrants further study.

Accurate color measurement methods for medical displays.

Science.gov (United States)

Saha, Anindita; Kelley, Edward F; Badano, Aldo

2010-01-01

The necessity for standard instrumentation and measurements of color that are repeatable and reproducible is the major motivation behind this work. Currently, different instrumentation and methods can yield very different results when measuring the same feature such as color uniformity or color difference. As color increasingly comes into play in medical imaging diagnostics, display color will have to be quantified in order to assess whether the display should be used for imaging purposes. The authors report on the characterization of three novel probes for measuring display color with minimal contamination from screen areas outside the measurement spot or from off-normal emissions. They compare three probe designs: A modified small-spot luminance probe and two conic probe designs based on black frusta. To compare the three color probe designs, spectral and luminance measurements were taken with specialized instrumentation to determine the luminance changes and color separation abilities of the probes. The probes were characterized with a scanning slit method, veiling glare, and a moving laser and LED arrangement. The scanning slit measurement was done using a black slit plate over a white line on an LCD monitor. The luminance was measured in 1 mm increments from the center of the slit to +/- 15 mm above and below the slit at different distances between the probe and the slit. The veiling glare setup consisted of measurements of the luminance of a black spot pattern with a white disk of radius of 100 mm as the black spot increases in 1 mm radius increments. The moving LED and laser method consisted of a red and green light orthogonal to the probe tip for the light to directly shine into the probe. The green light source was moved away from the red source in 1 cm increments to measure color stray-light contamination at different probe distances. The results of the color testing using the LED and laser methods suggest a better performance of one of the frusta probes

Shift Colors

Science.gov (United States)

Publications & News Shift Colors Pages default Sign In NPC Logo Banner : Shift Colors Search Navy Personnel Command > Reference Library > Publications & News > Shift Colors Top Link Bar Navy Personnel Library Expand Reference Library Quick Launch Shift Colors Shift Colors Archives Mailing Address How to

Probing Xe electronic structure by two-color HHG

International Nuclear Information System (INIS)

Faccialà, D; Ciriolo, A G; De Silvestri, S; Devetta, M; Negro, M; Stagira, S; Vozzi, C; Pabst, S; Bruner, B D; Dudovich, N; Soifer, H

2015-01-01

The aim of this study is probing the multi-electron behavior in xenon by two-color driven high harmonic generation. By changing the relative polarization of the two colors we were able to study different aspects of the multi-electron response. (paper)

Evaluation of the impact of initial red wine composition on changes in color and anthocyanin content during bottle storage.

Science.gov (United States)

Avizcuri, José-Miguel; Sáenz-Navajas, María-Pilar; Echávarri, José-Federico; Ferreira, Vicente; Fernández-Zurbano, Purificación

2016-12-15

Sixteen commercial red wines, selected to cover a different range of color and total polyphenols index (TPI), were stored at 25°C during 6months under controlled and different oxygen additions (0, 1.1, 3.1, 10.6 and 30.4mgL(-1)) during the bottling process. Changes in color and the anthocyanic composition were evaluated using transmittance spectra and UPLC-MS-UV/Vis respectively. Results reveal a general pattern in the evolution of wines. However, different patterns of evolution related to initial wine composition, especially to TPI, were observed. Wines with higher TPI had a lower evolution, whereas wines with lower TPI showed a higher evolution and greater variability in behavior. In general, oxygen seemed to accelerate all changes observed during aging although the oxygen effect was more limited than the effect of the storage time. These results are relevant for wine experts and help explain the evolution of wine at the bottling stage. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sensitive color dosimeters using photochromic diarylethenes

International Nuclear Information System (INIS)

Irie, Setsuko; Irie, Masahiro

2008-01-01

Various types of color dosimeters are conveniently used for estimating absorbed dose in the radiation sterilization of biomedical materials. Diarylethenes with heterocyclic aryl groups are extensively studied for the applications to the optoelectronic devices, such as optical memory media and photowitching devices because of their thermally irreversible and fatigue-resistant properties. The colors of diarylethenes never fade in the dark conditions. The thermally stable dithienylethene derivatives are applied to sensitive color dosimeters. Upon γ-irradiation, polystyrene films containing diarylethene derivatives, such as 1,2-bis(2-methyl-5-phenyl-3-thienyl) perfluorocyclopentene 1 or 1,2-bis(2,5-dimethyl-3-thienyl) perfluorocyclopentene 2, and fluorescent metal complexes turned blue or red. Even if the absorbed dose was as small as 10 Gy, a clear color change was observed. (author)

Color quality improvement of reconstructed images in color digital holography using speckle method and spectral estimation

Science.gov (United States)