WorldWideScience

Sample records for shorter productive life

  1. Application of ESL (Extended Shelf Life) Technology in Drinking Milk Production

    OpenAIRE

    ÜNVER, Naciye; ÇELİK, Şerafettin

    2017-01-01

    Nowadays pasteurization andUHT are the best known and most commonly used technologies in milk production.While products which have shorter shelf life and fresh taste are obtained byusing pasteurization, products which have longer shelf life but less desirabletaste are obtained by UHT technology. ESL technology is a new method which wasdeveloped to obtain a longer shelf life product than pasteurized milk andbetter sensory quality product than UHT milk. ESL milk includes technologiessuch as mic...

  2. SHORTER MENSTRUAL CYCLES ASSOCIATED WITH CHLORINATION BY-PRODUCTS IN DRINKING WATER

    Science.gov (United States)

    Shorter Menstrual Cycles Associated with Chlorination by-Products in Drinking Water. Gayle Windham, Kirsten Waller, Meredith Anderson, Laura Fenster, Pauline Mendola, Shanna Swan. California Department of Health Services.In previous studies of tap water consumption we...

  3. Projecting LED product life based on application

    Science.gov (United States)

    Narendran, Nadarajah; Liu, Yi-wei; Mou, Xi; Thotagamuwa, Dinusha R.; Eshwarage, Oshadhi V. Madihe

    2016-09-01

    LED products have started to displace traditional light sources in many lighting applications. One of the commonly claimed benefits for LED lighting products is their long useful lifetime in applications. Today there are many replacement lamp products using LEDs in the marketplace. Typically, lifetime claims of these replacement lamps are in the 25,000-hour range. According to current industry practice, the time for the LED light output to reach the 70% value is estimated according to IESNA LM-80 and TM-21 procedures and the resulting value is reported as the whole system life. LED products generally experience different thermal environments and switching (on-off cycling) patterns when used in applications. Current industry test methods often do not produce accurate lifetime estimates for LED systems because only one component of the system, namely the LED, is tested under a continuous-on burning condition without switching on and off, and because they estimate for only one failure type, lumen depreciation. The objective of the study presented in this manuscript was to develop a test method that could help predict LED system life in any application by testing the whole LED system, including on-off power cycling with sufficient dwell time, and considering both failure types, catastrophic and parametric. The study results showed for the LED A-lamps tested in this study, both failure types, catastrophic and parametric, exist. The on-off cycling encourages catastrophic failure, and maximum operating temperature influences the lumen depreciation rate and parametric failure time. It was also clear that LED system life is negatively affected by on-off switching, contrary to commonly held belief. In addition, the study results showed that most of the LED systems failed catastrophically much ahead of the LED light output reaching the 70% value. This emphasizes the fact that life testing of LED systems must consider catastrophic failure in addition to lumen depreciation, and

  4. Association of mutations in the hemochromatosis gene with shorter life expectancy

    DEFF Research Database (Denmark)

    Bathum, L; Christiansen, L; Nybo, H

    2001-01-01

    BACKGROUND: To investigate whether the frequency of carriers of mutations in the HFE gene associated with hereditary hemochromatosis diminishes with age as an indication that HFE mutations are associated with increased mortality. It is of value in the debate concerning screening for hereditary...... hemochromatosis to determine the significance of heterozygosity. METHODS: Genotyping for mutations in exons 2 and 4 of the HFE gene using denaturing gradient gel electrophoresis in 1784 participants aged 45 to 100 years from 4 population-based studies: all 183 centenarians from the Danish Centenarian Study, 601...... in the distribution of mutations in exon 2 in the different age groups. CONCLUSIONS: In a high-carrier frequency population like Denmark, mutations in HFE show an age-related reduction in the frequency of heterozygotes for C282Y, which suggests that carrier status is associated with shorter life expectancy....

  5. Déjà-vu all over again: using simulation to evaluate the impact of shorter shelf life for red blood cells at Héma-Québec.

    Science.gov (United States)

    Blake, John T; Hardy, Matthew; Delage, Gilles; Myhal, Geneviève

    2013-07-01

    Since the 1970s red blood cells (RBCs) have had a rated shelf life of 42 days. Recently, studies have suggested poorer patient outcomes when older blood is transfused. However, shortening the shelf life of RBCs may increase costs and lead to greater instances of outdates and shortages. A simulation method to evaluate the impact of a shorter shelf life for RBCs on a regional blood network was developed. A network model of the production and distribution system in the province of Quebec was built and validated. The model suggests that a shelf life of 21 or 28 days will have modest impact on outdate and shortage rates. A shelf life of 14 days will create significant challenges for both blood suppliers and hospitals and will result in systemwide outdate rates of 6.64% and shortage rates of 2.75%. The impact of a shorter shelf life for RBCs will disproportionately affect smaller and midsize hospitals. A shelf life of 28 or 21 days is feasible without excessive increases to systemwide outdate, shortage, or emergency ordering rates. Large hospitals will see minimal impact; smaller hospitals will see larger increases and may be unable to find inventory policies that maintain both low outdate and shortage rates. Reducing the shelf life to 14 days, or lower, results in significant challenges for suppliers and hospitals of all sizes. All hospitals will see an impact on outdate and shortage rates; overall systemwide outdate rates (6% or more) will reach levels that would currently be considered unacceptably high. © 2012 American Association of Blood Banks.

  6. Performance improvement: an active life cycle product management

    Science.gov (United States)

    Cucchiella, Federica; Gastaldi, Massimo; Lenny Koh, S. C.

    2010-03-01

    The management of the supply chain has gained importance in many manufacturing firms. Operational flexibility can be considered a crucial weapon to increase competitiveness in a turbulent marketplace. It reflects the ability of a firm to properly and rapidly respond to a variable and dynamic environment. For the firm operating in a fashion sector, the management of the supply chain is even more complex because the product life cycle is shorter than that of the firm operating in a non-fashion sector. The increase of firm flexibility level can be reached through the application of the real option theory inside the firm network. In fact, real option may increase the project value by allowing managers to more efficiently direct the production. The real option application usually analysed in literature does not take into account that the demands of products are well-defined by the product life cycle. Working on a fashion sector, the life cycle pattern is even more relevant because of an expected demand that grows according to a constant rate that does not capture the demand dynamics of the underlying fashion goods. Thus, the primary research objective of this article is to develop a model useful for the management of investments in a supply chain operating in a fashion sector where the system complexity is increased by the low level of unpredictability and stability that is proper of the mood phenomenon. Moreover, unlike the traditional model, a real option framework is presented here that considers fashion product characterised by uncertain stages of the production cycle.

  7. Product Life Design: Notes for course 41627

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles; Andreasen, Mogens Myrup

    2003-01-01

    - and ecological specifications, life cycle-oriented quality, whole life costs. - Product life systems, "the meeting", relational properties, the role of the human operator. - Modelling of the product and the product life cycle, computer modelling. - The score model, Integrated Product Development, Life Cycle...... Engineering, Concurrent Engineering. - The importance of the product concept, explicit life phase concepts. - Modelling of meetings, "universal virtues", simulation. - Product modelling, Product Data Management, life cycle databases, design history, documentation. - The structure and the content of the DFX......The course in product life design is designed to give an understanding of the phenomena of life cycle and product life thinking, the role of product design in fitting to product life systems and thus achieving sound product life perspectives. The course aims at developing an ability in the student...

  8. Confronting product life thinking with product life cycle analysis

    DEFF Research Database (Denmark)

    McAloone, Tim C.

    2001-01-01

    to "read" the environment out of the product, in order to systematically, quickly and efficiently come to some design recommendations for the company. The phrases "LCA" and "product life thinking" will be described and differentiated and a pattern identified for their cooperative effect in use....

  9. Effect of Group Exercising and Adjusting the Brace at Shorter Intervals on Cobb Angle and Quality of Life of Patients with Idiopathic Scoliosis

    Directory of Open Access Journals (Sweden)

    Zahra Hedayati

    2016-01-01

    Full Text Available Objective: Bracing along with exercising is the most effective protocol in patients with idiopathic scoliosis which have Cobb angles of 25 to 45 degrees. However, since the psychological aspects of scoliosis treatment may affect the quality of life, and the exact time for adjusting the pads of Milwaukee brace is unknown; Therefore the aim of this study was evaluating the effect of exercising in a group, with adjusting the brace in shorter intervals, in compare to routine protocol, in the treatment of idiopathic scoliosis. Matterials & Methods: Thirty-four patients with idiopathic scoliosis which had Cobb angles of 50 to 15 degrees were included in this study and were divided into experimental and control groups. The patients of two groups participated in an eleven-week treatment program, differ between the two groups. Quality of life scores of both groups were evaluated before and after intervention using SRS-22 questionnaire, as well as scoliosis angles before and after the intervention according to the primary and secondary radiographic X-rays. Results: Statistical analysis was performed using Paired T-Test in each group, and Independent T-Test between the two groups before and after treatment. The severity of scoliosis curvature and satisfaction domain of the experimental group was reduced significantly in compared with the control group, after intervention (P=0.04. Moreover in the case of  the quality of life in patients with Cobb angles less than 30 degrees, compared with patients with Cobb angles greater than 31 degrees, in the domains of self-image, satisfaction, and total score, the difference was significant (P<0.05. Conclusion: Adjusting the brace at shorter intervals along with exercising as a group, during the eleven weeks of treatment, has increased satisfaction and reduced the scoliosis Cobb angles of patients.

  10. End-of-Life Inventory Decisions of Service Parts

    NARCIS (Netherlands)

    M. Pourakbar (Morteza)

    2011-01-01

    textabstractWith the spurt of technology and innovation the life cycles of parts and products have become shorter and service parts enter their final phases earlier. Final phase of a typical service part starts once the part production is ceased and ends when the last service or warranty contract

  11. Selling new products

    NARCIS (Netherlands)

    Borgh, van der W.

    2012-01-01

    As we proceed into the 21st century, companies are facing increasingly complex and dynamic business environments. Many organizations have to deal with intense competition as more products are introduced faster, with shorter life cycles, and less competitive differentiation. Consequently, companies

  12. Life cycle and nano-products: end-of-life assessment

    International Nuclear Information System (INIS)

    Asmatulu, Eylem; Twomey, Janet; Overcash, Michael

    2012-01-01

    Understanding environmental impacts of nanomaterials necessitates analyzing the life cycle profile. The initial emphasis of nanomaterial life cycle studies has been on the environmental and health effects of nanoproducts during the production and usage stages. Analyzing the end-of-life (eol) stage of nanomaterials is also critical because significant impacts or benefits for the environment may arise at that particular stage. In this article, the Woodrow Wilson Center’s Project on Emerging Nanotechnologies (PEN) Consumer Products Inventory (CPI) model was used, which contains a relatively large and complete nanoproduct list (1,014) as of 2010. The consumer products have wide range of applications, such as clothing, sports goods, personal care products, medicine, as well as contributing to faster cars and planes, more powerful computers and satellites, better micro and nanochips, and long-lasting batteries. In order to understand the eol cycle concept, we allocated 1,014 nanoproducts into the nine end-of-life categories (e.g., recyclability, ingestion, absorption by skin/public sewer, public sewer, burning/landfill, landfill, air release, air release/public sewer, and other) based on probable final destinations of the nanoproducts. This article highlights the results of this preliminary assessment of end-of-life stage of nanoproducts. The largest potential eol fate was found to be recyclability, however little literature appears to have evolved around nanoproduct recycling. At lower frequency is dermal and ingestion human uptake and then landfill. Release to water and air are much lower potential eol fates for current nanoproducts. In addition, an analysis of nano-product categories with the largest number of products listed indicated that clothes, followed by dermal-related products and then sports equipment were the most represented in the PEN CPI (http

  13. Life cycle and nano-products: end-of-life assessment

    Energy Technology Data Exchange (ETDEWEB)

    Asmatulu, Eylem; Twomey, Janet; Overcash, Michael, E-mail: mrovercash@earthlink.net [Wichita State University, Department of Industrial and Manufacturing Engineering (United States)

    2012-03-15

    Understanding environmental impacts of nanomaterials necessitates analyzing the life cycle profile. The initial emphasis of nanomaterial life cycle studies has been on the environmental and health effects of nanoproducts during the production and usage stages. Analyzing the end-of-life (eol) stage of nanomaterials is also critical because significant impacts or benefits for the environment may arise at that particular stage. In this article, the Woodrow Wilson Center's Project on Emerging Nanotechnologies (PEN) Consumer Products Inventory (CPI) model was used, which contains a relatively large and complete nanoproduct list (1,014) as of 2010. The consumer products have wide range of applications, such as clothing, sports goods, personal care products, medicine, as well as contributing to faster cars and planes, more powerful computers and satellites, better micro and nanochips, and long-lasting batteries. In order to understand the eol cycle concept, we allocated 1,014 nanoproducts into the nine end-of-life categories (e.g., recyclability, ingestion, absorption by skin/public sewer, public sewer, burning/landfill, landfill, air release, air release/public sewer, and other) based on probable final destinations of the nanoproducts. This article highlights the results of this preliminary assessment of end-of-life stage of nanoproducts. The largest potential eol fate was found to be recyclability, however little literature appears to have evolved around nanoproduct recycling. At lower frequency is dermal and ingestion human uptake and then landfill. Release to water and air are much lower potential eol fates for current nanoproducts. In addition, an analysis of nano-product categories with the largest number of products listed indicated that clothes, followed by dermal-related products and then sports equipment were the most represented in the PEN CPI (http

  14. A comparison of production system life cycle models

    Science.gov (United States)

    Attri, Rajesh; Grover, Sandeep

    2012-09-01

    Companies today need to keep up with the rapidly changing market conditions to stay competitive. The main issues in this paper are related to a company's market and its competitors. The prediction of market behavior is helpful for a manufacturing enterprise to build efficient production systems. However, these predictions are usually not reliable. A production system is required to adapt to changing markets, but such requirement entails higher cost. Hence, analyzing different life cycle models of the production system is necessary. In this paper, different life cycle models of the production system are compared to evaluate the distinctive features and the limitations of each model. Furthermore, the difference between product life cycle and production life cycle is summarized, and the effect of product life cycle on production life cycle is explained. Finally, a production system life cycle model, along with key activities to be performed in each stage, is proposed specifically for the manufacturing sector.

  15. Preservation of Yangzhou flavor of dried bean cured products by irradiation

    International Nuclear Information System (INIS)

    Jiang Yunsheng; Lu Maolin; Dong Jie; Guo Dongfen; Chen Xiulan; Cao Hong

    2008-01-01

    White dried tofu as raw materials of Yangzhou dishes bean curd shreds, its shelf life was shorter for the traditional craft-making. This paper through improved its production technology and products for vacuum packaging with radiation durability, the shelf life at 4 degree C for 3 months was achieved. This technology may also apply to other related products. (authors)

  16. The Change of the Family Life Affected by the Shorter Working Time : From the Point of View of the Home Management

    OpenAIRE

    平田, 道憲

    1994-01-01

    In Japan, the working time has been decreasing. However, Japanese working people spend more hours per year to work than those in Western countries. The policy of the shorter working time is conducted by the Japanese Government in order that the working people get more free time. This paper examines whether the shorter working time of working members in the family enrich the time use of the other members of the family. Especially, the effect of the shorter working time of husbands to wives...

  17. On the shelf life of pharmaceutical products.

    Science.gov (United States)

    Capen, Robert; Christopher, David; Forenzo, Patrick; Ireland, Charles; Liu, Oscar; Lyapustina, Svetlana; O'Neill, John; Patterson, Nate; Quinlan, Michelle; Sandell, Dennis; Schwenke, James; Stroup, Walter; Tougas, Terrence

    2012-09-01

    This article proposes new terminology that distinguishes between different concepts involved in the discussion of the shelf life of pharmaceutical products. Such comprehensive and common language is currently lacking from various guidelines, which confuses implementation and impedes comparisons of different methodologies. The five new terms that are necessary for a coherent discussion of shelf life are: true shelf life, estimated shelf life, supported shelf life, maximum shelf life, and labeled shelf life. These concepts are already in use, but not named as such. The article discusses various levels of "product" on which different stakeholders tend to focus (e.g., a single-dosage unit, a batch, a production process, etc.). The article also highlights a key missing element in the discussion of shelf life-a Quality Statement, which defines the quality standard for all key stakeholders. Arguments are presented that for regulatory and statistical reasons the true product shelf life should be defined in terms of a suitably small quantile (e.g., fifth) of the distribution of batch shelf lives. The choice of quantile translates to an upper bound on the probability that a randomly selected batch will be nonconforming when tested at the storage time defined by the labeled shelf life. For this strategy, a random-batch model is required. This approach, unlike a fixed-batch model, allows estimation of both within- and between-batch variability, and allows inferences to be made about the entire production process. This work was conducted by the Stability Shelf Life Working Group of the Product Quality Research Institute.

  18. Non-arrhenius behavior in product life extension

    International Nuclear Information System (INIS)

    Dulka, C.P.; Scamman, J.F.

    1988-01-01

    The purpose of the work reported in this paper was to investigate contact sticking, which was determined to be caused by a materials shrinkage phenomenon. The phenomenon was noted after a brief accelerated thermal aging format, which was followed during the course of a General Electric materials analysis technique (GEMAT) product life extension program. The original qualification work did not address this phenomenon. This shrinkage phenomenon occurs in some materials and, depending upon the design of the product, could be a significant factor in a product life extension program. Further tests are planned in which this phenomenon will be investigated as a function of temperature and time duration in a GEMAT program. The extent of this phenomenon's effect on product life depends on type of material, product design, and product tolerances. Furthermore, this phenomenon may or may not exhibit an Arrhenius-type behavior, and more investigation is required in this area. In any product life extension program, the existence of this phenomenon and the degree to which it affects the product's life should be investigated. This phenomenon can be a significant factor

  19. Design of Demand Driven Return Supply Chain for High-Tech Products

    NARCIS (Netherlands)

    Ashayeri, J.; Tuzkaya, G.

    2010-01-01

    Many high-tech supply chain operate in a context of high process and market uncertainties due to shorter product life cycles. When introducing a new product, a company must manage the cost of supply, including the cost of returns over its short life cycle. The returns distribution looks like a

  20. Selling new products

    OpenAIRE

    Borgh, van der, W.

    2012-01-01

    As we proceed into the 21st century, companies are facing increasingly complex and dynamic business environments. Many organizations have to deal with intense competition as more products are introduced faster, with shorter life cycles, and less competitive differentiation. Consequently, companies are pushed to not only be more adept in product development but also in capitalizing on these innovative activities. However, while companies have become more successful in inventing and developing ...

  1. The Napoleon Complex: When Shorter Men Take More.

    Science.gov (United States)

    Knapen, Jill E P; Blaker, Nancy M; Van Vugt, Mark

    2018-05-01

    Inspired by an evolutionary psychological perspective on the Napoleon complex, we hypothesized that shorter males are more likely to show indirect aggression in resource competitions with taller males. Three studies provide support for our interpretation of the Napoleon complex. Our pilot study shows that men (but not women) keep more resources for themselves when they feel small. When paired with a taller male opponent (Study 1), shorter men keep more resources to themselves in a game in which they have all the power (dictator game) versus a game in which the opponent also has some power (ultimatum game). Furthermore, shorter men are not more likely to show direct, physical aggression toward a taller opponent (Study 2). As predicted by the Napoleon complex, we conclude that (relatively) shorter men show greater behavioral flexibility in securing resources when presented with cues that they are physically less competitive. Theoretical and practical implications are discussed.

  2. How do shorter working hours affect employee wellbeing? : Shortening working time in Finland

    OpenAIRE

    Lahdenperä, Netta

    2017-01-01

    The way work is done is dramatically changing due to digital breakthroughs. Generation Y is entering the workforce with a changed attitude towards work as organizations are increasing their focus towards employee wellbeing. Organizations who adopt the new model of work and understand the importance of the wellbeing of their staff are leading the transition to a more efficient business, better working life and a healthier planet. The thesis explores the numerous effects of shorter working...

  3. Combining information flow and physics-of-failure in mechatronic products

    NARCIS (Netherlands)

    Magniez, C.A.A.

    2007-01-01

    A continuous acceleration in the rate of technological development, shorter product life cycles, more intense competition due to maturing of markets and globalization, have forced firms to increasingly rely on new products for sales and profitability. However, reliability and quality management

  4. Driving for shorter outages

    International Nuclear Information System (INIS)

    Tritch, S.

    1996-01-01

    Nuclear plant outages are necessary to complete activities that cannot be completed during the operating cycle, such as steam generator inspection and testing, refueling, installing modifications, and performing maintenance tests. The time devoted to performing outages is normally the largest contributor to plant unavailability. Similarly, outage costs are a sizable portion of the total plant budget. The scope and quality of work done during outages directly affects operating reliability and the number of unplanned outages. Improved management and planning of outages enhances the margin of safety during the outage and results in increased plant reliability. The detailed planning and in-depth preparation that has become a necessity for driving shorter outage durations has also produced safer outages and improved post-outage reliability. Short outages require both plant and vendor management to focus on all aspects of the outage. Short outage durations, such as 26 days at South Texas or 29 days at North Anna, require power plant inter-department and intra-department teamwork and communication and vendor participation. In this paper shorter and safer outage at the 3-loop plants in the United States are explained. (J.P.N.)

  5. Predicting product life cycle using fuzzy neural network

    Directory of Open Access Journals (Sweden)

    Ali Mohammadi

    2014-09-01

    Full Text Available One of the most important tasks of science in different fields is to find the relationships among various phenomena in order to predict future. Production and service organizations are not exceptions and they should predict future to survive. Predicting the life cycle of the organization's products is one of the most important prediction cases in an organization. Predicting the product life cycle provides an opportunity to identify the product position and help to get a better insight about competitors. This paper deals with the predictability of the product life cycle with Adaptive Network-Based Fuzzy Inference System (ANFIS. The Population of this study was Pegah Fars products and the sample was this company's cheese products. In this regard, this paper attempts to model and predict the product life cycle of cheese products in Pegah Fars Company. In this due, a designed questionnaire was distributed among some experts, distributors and retailers and seven independent variables were selected. In this survey, ANFIS sales forecasting technique was employed and MATLAB software was used for data analysis. The results confirmed ANFIS as a good method to predict the product life cycle.

  6. A business model framework for product life extension

    NARCIS (Netherlands)

    Den Hollander, M.C.; Bakker, C.A.

    2012-01-01

    Product life extension is an increase in the utilization period of products. Design research on product life extension strategies has so far mainly focused on technical aspects of products, like ‘prevention engineering’ or ‘design for repair, maintenance and upgradability’, and on individual

  7. Survey on the life cycle system of a product with shared information; Joho kyoyugata product life cycle system ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report provides and proposes new concept and optimization technology on the life cycle system of product for emission minimum. For the proposed life cycle system of product with shared information, the global emission minimum is realized by considering the final emission, the information is given to the product and shared in all the life cycle system, the information sending function is considered from the product, and the information necessary for material processing are actively used. For this life cycle system of product, development of the information model for the system, development of the technology of data saving, renewing, searching and sending, development of sensing and re-using technologies of the product for life cycle, development of the technology attaching information in the product for emission minimum, design of the guidelines of material composition, and research and development of materials for emission minimum are extracted and provided as tasks. 26 refs., 69 figs., 8 tabs.

  8. Work-Life Balance, Management Practices and Productivity

    OpenAIRE

    Nick Bloom; Tobias Kretschmer; John Van Reenen

    2006-01-01

    Do “Anglo-Saxon” management practices generate higher productivity only at the expense of lousy work-life balance (WLB) for workers? Many critics of “neo-libéralisme sauvage” have argued that increased competition from globalisation is damaging employees’ quality of life. Others have argued the opposite that improving work-life balance is actually a competitive tool that companies can use to raise productivity. We try to shed some empirical light on these issues using an innovative survey too...

  9. 36 CFR 223.81 - Shorter advertising periods in emergencies.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Shorter advertising periods... OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Advertisement and Bids § 223.81 Shorter advertising periods in emergencies. In emergency situations where prompt...

  10. Comparison of conventional Injection Mould Inserts to Additively Manufactured Inserts using Life Cycle Assessment

    DEFF Research Database (Denmark)

    Hofstätter, Thomas; Bey, Niki; Mischkot, Michael

    2016-01-01

    Polymer Additive Manufacturing can be used to produce soft tooling inserts for injection moulding. Compared to conventional tooling, the energy and time consumption during production are significantly lower. As the life time of such inserts is significantly shorter than the life time of traditional...... of their potential environmental impact and yield throughout the development and pilot phase. Insert geometry is particularly advantageous for pilot production and small production sizes. In this research, Life Cycle Assessment is used to compare the environmental impact of soft tooling by Additive Manufacturing...... (using Digital Light Processing) and three traditional methods for the manufacture of inserts (milling of brass, steel, and aluminium) for injection moulds during the pre-production phase....

  11. Applying life cycle management of colombian cocoa production

    Directory of Open Access Journals (Sweden)

    Oscar Orlando Ortiz-R

    2014-03-01

    Full Text Available The present research aims to evaluate the usefulness of the application of Life Cycle Management in the agricultural sector focusing on the environmental and socio-economic aspects of decision making in the Colombian cocoa production. Such appraisal is based on the application of two methodological tools: Life Cycle Assessment, which considers environmental impacts throughout the life cycle of the cocoa production system, and Taguchi Loss Function, which measures the economic impact of a process' deviation from production targets. Results show that appropriate improvements in farming practices and supply consumption can enhance decision-making in the agricultural cocoa sector towards sustainability. In terms of agri-business purposes, such qualitative shift allows not only meeting consumer demands for environmentally friendly products, but also increasing the productivity and competitiveness of cocoa production, all of which has helped Life Cycle Management gain global acceptance. Since farmers have an important role in improving social and economic indicators at the national level, more attention should be paid to the upgrading of their cropping practices. Finally, one fundamental aspect of national cocoa production is the institutional and governmental support available for farmers in face of socio-economic or technological needs.

  12. Implementing Life Cycle Assessment in Product development

    DEFF Research Database (Denmark)

    Bhander, Gurbakhash Singh

    2003-01-01

    The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating the envir......The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating......, and of the opportunities for introducing environmental criteria in the design process through meeting the information requirements of the designer on the different life cycle stages, producing an in-depth understanding of the attitudes of practitioners among product developers to the subject area, and an understanding...... of possible future directions for product development. An Environmentally Conscious Design method is introduced and trade-offs are presented between design degrees of freedom and environmental solutions. Life cycle design frameworks and strategies are addressed. The paper collects experiences and ideas around...

  13. Shelf life study on Nuclear Malaysia biofertilizer products

    International Nuclear Information System (INIS)

    Phua Choo Kwai Hoe; Ahmad Nazrul Abd Wahid; Khairuddin Abdul Rahim

    2009-01-01

    Phosphate solubilising bacteria and plant growth promoting rhizobacteria are biofertilizer microorganisms known to increase crop yields. It is important to prepare suitable sterile carriers or substrates for these microorganisms into biofertilizer products with long shelf life. Optimum storage conditions, especially storage temperature is needed to improve shelf life of the products. Isolates of two phosphate solubilising bacteria (AP1 and AP3) and one plant growth promoting rhizobacteria (AP2) have been developed into biofertilizer products in Malaysian Nuclear Agency (NuclearMalaysia). These isolates were inoculated into a compost-based carrier, sterilised by gamma irradiation at 50 kGy, from MINTec-SINAGAMA, Nuclear Malaysia. Biofertilizer products kept at low temperatures (9 ± 2 degree C) showed better shelf life (storage for six months) as compared to those stored at room temperatures (28 ± 2 degree C). Further observation of the shelf life is still in progress. (Author)

  14. Total Product Life Cycle (TPLC)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Total Product Life Cycle (TPLC) database integrates premarket and postmarket data about medical devices. It includes information pulled from CDRH databases...

  15. N-Terminal Domains in Two-Domain Proteins Are Biased to Be Shorter and Predicted to Fold Faster Than Their C-Terminal Counterparts

    Directory of Open Access Journals (Sweden)

    Etai Jacob

    2013-04-01

    Full Text Available Computational analysis of proteomes in all kingdoms of life reveals a strong tendency for N-terminal domains in two-domain proteins to have shorter sequences than their neighboring C-terminal domains. Given that folding rates are affected by chain length, we asked whether the tendency for N-terminal domains to be shorter than their neighboring C-terminal domains reflects selection for faster-folding N-terminal domains. Calculations of absolute contact order, another predictor of folding rate, provide additional evidence that N-terminal domains tend to fold faster than their neighboring C-terminal domains. A possible explanation for this bias, which is more pronounced in prokaryotes than in eukaryotes, is that faster folding of N-terminal domains reduces the risk for protein aggregation during folding by preventing formation of nonnative interdomain interactions. This explanation is supported by our finding that two-domain proteins with a shorter N-terminal domain are much more abundant than those with a shorter C-terminal domain.

  16. DESIGN CONSIDERATIONS UPON PRODUCT END-OF-LIFE OPTIONS

    Directory of Open Access Journals (Sweden)

    BARSAN Lucian

    2016-11-01

    Full Text Available The paper presents some considerations about the necessity of evaluating the environmental impact of a product during its entire life. The present situation (economic, social and ecologic imposes solutions to reduce this impact as a result of an analysis performed during all stages of the life cycle. This paper focuses on design solutions with consequences in the last stage, the end-of-life. Reusing products, with, or without remanufacturing and recycling the materials from products that cannot be reused represent some options analysed in this paper. The end-of-life options should be known even from the beginning of the design process and should be included as design objectives or, at least as constrictions. Considering them as human needs would naturally include them in the requirements list.

  17. Genetic value of herd life adjusted for milk production.

    Science.gov (United States)

    Allaire, F R; Gibson, J P

    1992-05-01

    Cow herd life adjusted for lactational milk production was investigated as a genetic trait in the breeding objective. Under a simple model, the relative economic weight of milk to adjusted herd life on a per genetic standard deviation basis was equal to CVY/dCVL where CVY and CVL are the genetic coefficients of variation of milk production and adjusted herd life, respectively, and d is the depreciation per year per cow divided by the total fixed costs per year per cow. The relative economic value of milk to adjusted herd life at the prices and parameters for North America was about 3.2. An increase of 100-kg milk was equivalent to 2.2 mo of adjusted herd life. Three to 7% lower economic gain is expected when only improved milk production is sought compared with a breeding objective that included both production and adjusted herd life for relative value changed +/- 20%. A favorable economic gain to cost ratio probably exists for herd life used as a genetic trait to supplement milk in the breeding objective. Cow survival records are inexpensive, and herd life evaluations from such records may not extend the generation interval when such an evaluation is used in bull sire selection.

  18. FY 1997 survey report on information sharing product life-cycle systems. 2; 1997 nendo joho kyoyugata product life cycle system ni kansuru chosa hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Highly value-added products considering a total life-cycle of products by integrating both production and consumption activities are much in demand, and each information corresponding to each product should be realized by concept integrating both information and product as common element. Survey was made on what a social system integrating production and consumption should be, a product information model, and technology integrating both information and product for raw material, industrial machine and household appliance as examples. An information model shared by the whole production and consumption activities was first prepared. Based on this model, data storage, update, retrieval and dispatch technologies were surveyed and developed for life-cycle systems. Degradation and life sensing technology was surveyed for maintenance, repair and disposal activities using proper unstable information of each product. A support system for use of shared information was developed to promote a new highly value-added function. Total evaluation was made on information sharing product life-cycle systems. 10 refs., 23 figs., 7 tabs.

  19. Marital disruption is associated with shorter salivary telomere length in a probability sample of older adults.

    Science.gov (United States)

    Whisman, Mark A; Robustelli, Briana L; Sbarra, David A

    2016-05-01

    Marital disruption (i.e., marital separation, divorce) is associated with a wide range of poor mental and physical health outcomes, including increased risk for all-cause mortality. One biological intermediary that may help explain the association between marital disruption and poor health is accelerated cellular aging. This study examines the association between marital disruption and salivary telomere length in a United States probability sample of adults ≥50 years of age. Participants were 3526 individuals who participated in the 2008 wave of the Health and Retirement Study. Telomere length assays were performed using quantitative real-time polymerase chain reaction (qPCR) on DNA extracted from saliva samples. Health and lifestyle factors, traumatic and stressful life events, and neuroticism were assessed via self-report. Linear regression analyses were conducted to examine the associations between predictor variables and salivary telomere length. Based on their marital status data in the 2006 wave, people who were separated or divorced had shorter salivary telomeres than people who were continuously married or had never been married, and the association between marital disruption and salivary telomere length was not moderated by gender or neuroticism. Furthermore, the association between marital disruption and salivary telomere length remained statistically significant after adjusting for demographic and socioeconomic variables, neuroticism, cigarette use, body mass, traumatic life events, and other stressful life events. Additionally, results revealed that currently married adults with a history of divorce evidenced shorter salivary telomeres than people who were continuously married or never married. Accelerated cellular aging, as indexed by telomere shortening, may be one pathway through which marital disruption is associated with morbidity and mortality. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Enriching step-based product information models to support product life-cycle activities

    Science.gov (United States)

    Sarigecili, Mehmet Ilteris

    The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

  1. Application of product life cycle concept to private label management

    Directory of Open Access Journals (Sweden)

    Sandra Horvat

    2013-06-01

    Full Text Available Private labels have recorded significant growth rates worldwide, becoming a serious threat to manufacturer brands. Development of private labels in many different product categories increased the complexity of their management. Therefore, this paper examines the possibility of using the product life cycle concept in private label management. Given that private labels are a specific brand type, it is necessary to adjust certain elements of the product life cycle concept, as it was developed on the basis of manufacturer brands. For instance, in the growth stage of the product life cycle, retailers expand private labels to a number of product categories and use the push strategy while manufacturers tend to expand their distribution network in the expansion of their brands and predominantly use the pull strategy in doing so. Furthermore, there is a focus shift from low-price strategy, predominantly used in the introduction phase, to increasing the quality and private label value in the later stages of the product life cycle.

  2. Life Cycle Assessment Of Hydrogen Production From Natural Gas Reforming Process

    International Nuclear Information System (INIS)

    Ozturk, M.

    2010-01-01

    Society has become concerned about the issues of natural resource depletion and environmental degradation. The environmental performance of products or processes has become a key issue, which is why ways to minimize the effects on the environment are investigated. The most effective tool for this purpose is called life cycle assessment (LCA). This concept considers the entire life cycle of product or process. The life cycle of a product begins with the extraction of raw materials from the earth to create the product and ends at the point when all materials are returned to the earth. LCA makes it possible to estimate the cumulative environmental impacts resulting from all stages in the product life cycle, often including impacts not considered in more traditional analyses. Therefore, LCA provides a comprehensive view of the environmental aspects of the product or process and a more accurate picture of the true environmental trade-offs in product selection. In the case of this study, life cycle assessments of hydrogen production via natural gas reforming process are investigated for environmental affect.

  3. Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hanssen, Ole Joergen

    1997-12-31

    This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

  4. Greater reproductive investment, but shorter lifespan, in agrosystem than in natural-habitat toads

    Directory of Open Access Journals (Sweden)

    Francisco Javier Zamora-Camacho

    2017-09-01

    Full Text Available Global amphibian decline is due to several factors: habitat loss, anthropization, pollution, emerging diseases, and global warming. Amphibians, with complex life cycles, are particularly susceptible to habitat alterations, and their survival may be impaired in anthropized habitats. Increased mortality is a well-known consequence of anthropization. Life-history theory predicts higher reproductive investment when mortality is increased. In this work, we compared age, body size, and different indicators of reproductive investment, as well as prey availability, in natterjack toads (Epidalea calamita from agrosystems and adjacent natural pine groves in Southwestern Spain. Mean age was lower in agrosystems than in pine groves, possibly as a consequence of increased mortality due to agrosystem environmental stressors. Remarkably, agrosystem toads were larger despite being younger, suggesting accelerated growth rate. Although we detected no differences in prey availability between habitats, artificial irrigation could shorten aestivation in agrosystems, thus increasing energy trade. Moreover, agrosystem toads exhibited increased indicators of reproductive investment. In the light of life-history theory, agrosystem toads might compensate for lesser reproductive events—due to shorter lives—with a higher reproductive investment in each attempt. Our results show that agrosystems may alter demography, which may have complex consequences on both individual fitness and population stability.

  5. Money-back guarantee warranty policy with preventive maintenance strategy for sensor-embedded remanufactured products

    Science.gov (United States)

    Alqahtani, Ammar Y.; Gupta, Surendra M.

    2018-01-01

    In today's global environment, technology is constantly evolving. Being able to stay up-to-date with the very latest technological advances can be extremely hard to accomplish. As a result of these changes and developments in technology, which often come unexpectedly, consumers are frequently tempted to update their devices to the very latest model. The result is that the life cycle of a product is becoming shorter and shorter than before. Manufacturers attempt to respond to consumers' concerns involving environmental issues as well as the more governmentally stringent environmental legislations by establishing facilities which include the minimization of the totality of waste relocated to landfills by recovering materials and components from returned, or End-Of-Life products and reuse them to build a remanufactured product, and/or novel components. With the rapid growth of interest in remanufactured products' market, offering warranty for remanufactured products and components is becoming a necessity for remanufacturer in order to meet customers' requirement and as a marketing mechanism. During that process, maintenance policies are of great importance in order to reduce the warranty cost on the remanufacturer. In this paper, an optimization simulation model for remanufactured items sold with one-dimensional non-renewing money-back guarantee (MBG) warranty policy is proposed from the view of remanufacturer, in which, an End-Of-Life product is subjected to upgrade action at the end of its past life and during the warranty period, preventive maintenance actions are carried out when the remaining life of the product reaches a pre-specified value so that the remanufacturer's expected profit can be maximized. Finally, a numerical example and design of experiment analysis are provided to demonstrate the proposed approach.

  6. Replacement and inspection policies for products with random life cycle

    International Nuclear Information System (INIS)

    Yun, Won Young; Nakagawa, Toshio

    2010-01-01

    In this paper, we consider maintenance policies for products in which the economical life cycle of products is a random variable. First, we study a periodic replacement policy with minimal repair. The system is minimally repaired at failure and is replaced by new one at age T (periodic replacement policy with minimal repair of Barlow and Hunter). The expected present value of total maintenance cost of products with random life cycle is obtained and the optimal replacement interval minimizing the cost is found. Second, we consider an inspection policy for products with random life cycle to detect the system failure. The expected total cost is obtained and the optimal inspection interval is found. Numerical examples are also included.

  7. Estimating pesticide emissions for life cycle assessment of agricultural products

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Røpke, Inge

    2004-01-01

    As the first country in Europe Denmark almost 2 years ago established an official center for Life Cycle Assessments and life cycle approaches as an element of the national IPP (Integrated Product Policy). The Danish EPA lends financial support to this important initiative, the aim of which is to: 1....... promote the use of Life Cycle Assessment and other product-oriented environmental tools in companies, 2. support companies and other in using environmental assessment of products and services, 3. ensure that the effort in the LCA area is based on a solid and scientific basis, and 4. maintain the well...... evaluation finished in September 2004. Important learnings for all who are engaged in dissemination of life cycle thinking in industry will be presented....

  8. EPD--environmental product declarations for wood products : an application of life cycle information about forest products

    Science.gov (United States)

    Richard Bergman; Adam Taylor

    2011-01-01

    Transparent and credible environmental labeling of products is vital for a sustainable future. Ecolabeling shows information on the environmental performance of products, processes, and services. This article focuses on one type of ecolabeling referred to as environmental product declarations (EPDs) that provide environmental impact information based on life cycle...

  9. Industrial open source solutions for product life cycle management

    Directory of Open Access Journals (Sweden)

    Jaime Campos

    2014-12-01

    Full Text Available The authors go through the open source for product life cycle management (PLM and the efforts done from communities such as the open source initiative. The characteristics of the open source solutions are highlighted as well. Next, the authors go through the requirements for PLM. This is an area where more attention has been given as the manufacturers are competing with the quality and life cycle costs of their products. Especially, the need of companies to try to get a strong position in providing services for their products and thus to make themselves less vulnerable to changes in the market has led to high interest in product life cycle simulation. The potential of applying semantic data management to solve these problems discussed in the light of recent developments. In addition, a basic roadmap is presented as to how the above-described problems could be tackled with open software solutions.

  10. Quality estimation methods used in product life cycle

    OpenAIRE

    M. Dudek-Burlikowska; D. Szewieczek

    2007-01-01

    Purpose: A new approach to quality control in production company with usage of quality research methods has been presented.Design/methodology/approach: The possibility of usage of quality research methods are connected with continuous quality improvement of pre-production, production and after-production spheres of organization. Interdependence of the quality research methods and product life cycle has been taken into account.Findings: At the present time the enterprises should integrate qua...

  11. Lysine: Participation in life, production and biosynthesis

    International Nuclear Information System (INIS)

    Shah, A.H.; Hameed, A.

    2002-01-01

    Lysine plays a vital role in life. Its demands increase worldwide. It is in the interest of students to advertise the supreme importance of its productions. In this report, the mechanism and the biosynthetic pathway of lysine in corynebacterium glutamicum is illustrated, in a simple and ready understandable way. These will pave the way of lysine production. (author)

  12. Life-cycle greenhouse gas emissions and energy balances of sugarcane ethanol production in Mexico

    International Nuclear Information System (INIS)

    Garcia, Carlos A.; Fuentes, Alfredo; Hennecke, Anna; Riegelhaupt, Enrique; Manzini, Fabio; Masera, Omar

    2011-01-01

    The purpose of this work was to estimate GHG emissions and energy balances for the future expansion of sugarcane ethanol fuel production in Mexico with one current and four possible future modalities. We used the life cycle methodology that is recommended by the European Renewable Energy Directive (RED), which distinguished the following five system phases: direct Land Use Change (LUC); crop production; biomass transport to industry; industrial processing; and ethanol transport to admixture plants. Key variables affecting total GHG emissions and fossil energy used in ethanol production were LUC emissions, crop fertilization rates, the proportion of sugarcane areas that are burned to facilitate harvest, fossil fuels used in the industrial phase, and the method for allocation of emissions to co-products. The lower emissions and higher energy ratios that were observed in the present Brazilian case were mainly due to the lesser amount of fertilizers applied, also were due to the shorter distance of sugarcane transport, and to the smaller proportion of sugarcane areas that were burned to facilitate manual harvest. The resulting modality with the lowest emissions of equivalent carbon dioxide (CO 2e ) was ethanol produced from direct juice and generating surplus electricity with 36.8 kgCO 2e /GJ ethanol . This was achieved using bagasse as the only fuel source to satisfy industrial phase needs for electricity and steam. Mexican emissions were higher than those calculated for Brazil (27.5 kgCO 2e /GJ ethanol ) among all modalities. The Mexican modality with the highest ratio of renewable/fossil energy was also ethanol from sugarcane juice generating surplus electricity with 4.8 GJ ethanol /GJ fossil .

  13. Rapid Production Ramp-up for International Collaborative Supply Network in Electronics Goods Industry (X-Box, PS II, I-Pod, Etc) A Review of Existing Practices, Issues, and Challenges

    OpenAIRE

    Hu, Ning

    2006-01-01

    The fierce competition of international consumer electronics market has brought more pressures on the manufacturing section especially in the context of globalization. The global producers have to find effective solution to cope with the challenges such as shorter and shorter product life, less and less customer loyalty and resources limitation. The fact that rapid production ramp up and supply network collaboration could benefit their performance has been recognized by many business giants s...

  14. When Product Life Cycle Meets Customer Activity Cycle

    DEFF Research Database (Denmark)

    Tan, Adrian Ronald

    2007-01-01

    Manufacturing companies have traditionally focused their efforts on designing, developing and producing products to offer on the market. Today global competition and demands for greater company responsibility of products throughout their entire life cycle are driving manufacturing companies to sh...

  15. An MILP modeling approach for shelf life integrated planning in yoghurt production

    NARCIS (Netherlands)

    Lütke Entrup, M.; Grunow, M.; Günther, H.O.; Seiler, T.; Beek, van P.

    2005-01-01

    In the production of perishable products such as dairy, meat, or bakery goods, the consideration of shelf life in production planning is of particular importance. Retail customers with relatively low inventory turns can benefit significantly from longer product shelf life as wastage and out-of-stock

  16. Environmental and economic analysis of end of life management options for an HDPE product using a life cycle thinking approach.

    Science.gov (United States)

    Simões, Carla L; Pinto, Lígia M Costa; Bernardo, C A

    2014-05-01

    Manufacturers have been increasingly considering the implication of materials used in commercial products and the management of such products at the end of their useful lives (as waste or as post-consumer secondary materials). The present work describes the application of the life cycle thinking approach to a plastic product, specifically an anti-glare lamellae (used for road safety applications) made with high-density polyethylene (HDPE). This study shows that optimal environmental and economic outcomes associated with this product can be realized by recovering the material at the end of its useful life (end of life, EoL) and by using the recycled HDPE as a raw material in the production of new similar products. The study confirmed the applicability of the life cycle thinking approach by industry in sustainable products development, supporting the development of robust environmental and economic guidelines.

  17. Integrated design strategy for product life-cycle management

    Science.gov (United States)

    Johnson, G. Patrick

    2001-02-01

    Two major trends suggest new considerations for environmentally conscious manufacturing (ECM) -- the continuation of dematerialization and the growing trend toward goods becoming services. A diversity of existing research could be integrated around those trends in ways that can enhance ECM. Major research-based achievements in information, computation, and communications systems, sophisticated and inexpensive sensing capabilities, highly automated and precise manufacturing technologies, and new materials continue to drive the phenomenon of dematerialization - the reduction of the material and energy content of per capita GDP. Knowledge is also growing about the sociology, economics, mathematics, management and organization of complex socio-economic systems. And that has driven a trend towards goods evolving into services. But even with these significant trends, the value of material, energy, information and human resources incorporated into the manufacture, use and disposal of modern products and services often far exceeds the benefits realized. Multi-disciplinary research integrating these drivers with advances in ECM concepts could be the basis for a new strategy of production. It is argued that a strategy of integrating information resources with physical and human resources over product life cycles, together with considering products as streams of service over time, could lead to significant economic payoff. That strategy leads to an overall design concept to minimize costs of all resources over the product life cycle to more fully capture benefits of all resources incorporated into modern products. It is possible by including life cycle monitoring, periodic component replacement, re-manufacture, salvage and human factor skill enhancement into initial design.

  18. Advanced glycation end-products and skin autofluorescence in end-stage renal disease : a review

    NARCIS (Netherlands)

    Arsov, Stefan; Graaff, Reindert; van Oeveren, Wim; Stegmayr, Bernd; Sikole, Aleksandar; Rakhorst, Gerhard; Smit, Andries J.

    Chronic kidney disease (CKD), especially in its end stage, is marked by extremely high cardiovascular rates of morbidity and mortality; hemodialysis patients have a five-fold shorter life expectancy than healthy subjects of the same age. In CKD the metabolic products that accumulate in the body are

  19. Life Cycle Assessment in the Cereal and Derived Products Sector

    DEFF Research Database (Denmark)

    Renzulli, Pietro A.; Bacenetti, Jacopo; Benedetto, Graziella

    2015-01-01

    environmental improvement in such systems. Following a brief introduction to the cereal sector and supply chain, this chapter reviews some of the current cereal-based life cycle thinking literature, with a particular emphasis on LCA. Next, an analysis of the LCA methodological issues emerging from......This chapter discusses the application of life cycle assessment methodologies to rice, wheat, corn and some of their derived products. Cereal product systems are vital for the production of commodities of worldwide importance that entail particular environmental hot spots originating from...... their widespread use and from their particular nature. It is thus important for tools such as life cycle assessment (LCA) to be tailored to such cereal systems in order to be used as a means of identifying the negative environmental effects of cereal products and highlighting possible pathways to overall...

  20. Customer-driven Product Development

    DEFF Research Database (Denmark)

    Sommer, Anita Friis

    2011-01-01

    look for new ways to gain competitive advantage. In competitive markets there is a tendency of shorter product life cycles, and thus a competitive factor is to keep at pace with the market or even driving the market by developing new products. This research study seeks to investigate Customer......Demand chain management is a research area of increasing attention. It is the undertaking of reacting to customer requirements through a responsive chain going from customers through a focal company towards raw material distributors. With faster growing markets and increasing competition, companies......-driven Product Development (CDPD) from a demand chain management perspective. CDPD is the counterpart to typical research and development processes, which has no direct customer involvement. The proposition is that letting customers initiate and participate in the product development process...

  1. Environmental Product Development Combining the Life Cycle Perspective with Chemical Hazard Information

    DEFF Research Database (Denmark)

    Askham, Cecilia

    in the design or redesign process. This thesis concerns marrying the life cycle perspective with chemical hazard information, in order to advance the practice of environmental product development, and hence takes further steps towards sustainable development. The need to consider the full value chain...... for the life cycle of products meant that systems theory and systems engineering principles were important in this work. Life cycle assessment methodology was important for assessing environmental impacts for case products. The new European regulation for chemicals (REACH) provided the main driver......Concerns regarding the short- and long-term detrimental effects of chemicals on human health and ecosystems have made the minimisation of chemical hazards a vitally important issue. If sustainable development is to be achieved, environmental efficient products (and product life cycles...

  2. Effect of length of productive life on genetic trend of milk production ...

    African Journals Online (AJOL)

    Longevity is an important economic trait in dairy cattle. Including this trait in a breeding scheme, increases profit. The aim of this study was to evaluate the relationship between length of productive life (LPL), genetic trend of milk production and profitability of herds. LPL has been defined as time from first calving to culling.

  3. Environmental Performance of Kettle Production: Product Life Cycle Assessment

    Science.gov (United States)

    Marcinkowski, Andrzej; Zych, Krzysztof

    2017-12-01

    The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA) conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach) where the main function is boiling 3360 l of water during 4-year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g). The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste scenario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix) which determined final comparison results. Basing on LCA results, some improvements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

  4. ENVIRONMENTAL PERFORMANCE OF KETTLE PRODUCTION: PRODUCT LIFE CYCLE ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Andrzej MARCINKOWSKI

    2017-10-01

    Full Text Available The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach where the main function is boiling 3360 l of water during 4- year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g. The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste sce-nario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix which determined final comparison results. Basing on LCA results, some im-provements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

  5. Extending 3D near-cloud corrections from shorter to longer wavelengths

    International Nuclear Information System (INIS)

    Marshak, Alexander; Evans, K. Frank; Várnai, Tamás; Wen, Guoyong

    2014-01-01

    Satellite observations have shown a positive correlation between cloud amount and aerosol optical thickness (AOT) that can be explained by the humidification of aerosols near clouds, and/or by cloud contamination by sub-pixel size clouds and the cloud adjacency effect. The last effect may substantially increase reflected radiation in cloud-free columns, leading to overestimates in the retrieved AOT. For clear-sky areas near boundary layer clouds the main contribution to the enhancement of clear sky reflectance at shorter wavelengths comes from the radiation scattered into clear areas by clouds and then scattered to the sensor by air molecules. Because of the wavelength dependence of air molecule scattering, this process leads to a larger reflectance increase at shorter wavelengths, and can be corrected using a simple two-layer model [18]. However, correcting only for molecular scattering skews spectral properties of the retrieved AOT. Kassianov and Ovtchinnikov [9] proposed a technique that uses spectral reflectance ratios to retrieve AOT in the vicinity of clouds; they assumed that the cloud adjacency effect influences the spectral ratio between reflectances at two wavelengths less than it influences the reflectances themselves. This paper combines the two approaches: It assumes that the 3D correction for the shortest wavelength is known with some uncertainties, and then it estimates the 3D correction for longer wavelengths using a modified ratio method. The new approach is tested with 3D radiances simulated for 26 cumulus fields from Large-Eddy Simulations, supplemented with 40 aerosol profiles. The results showed that (i) for a variety of cumulus cloud scenes and aerosol profiles over ocean the 3D correction due to cloud adjacency effect can be extended from shorter to longer wavelengths and (ii) the 3D corrections for longer wavelengths are not very sensitive to unbiased random uncertainties in the 3D corrections at shorter wavelengths. - Highlights:

  6. The Environmental Impact of Industrial Bamboo Products : Life-cycle Assessment and Carbon Sequestration

    NARCIS (Netherlands)

    Vogtlander, J.G.; Van der Lugt, P.

    2014-01-01

    This report gives a Life-Cycle Assessment (LCA) and carbon footprint analysis on a selection of industrial bamboo products. The LCA is made for cradle-to-gate, plus the end-of-life stages of the bamboo products. For end-of-life it is assumed that 90% of the bamboo products are incinerated in an

  7. Use of Optical Oxygen Sensors in Non-Destructively Determining the Levels of Oxygen Present in Combined Vacuum and Modified Atmosphere Packaged Pre-Cooked Convenience-Style Foods and the Use of Ethanol Emitters to Extend Product Shelf-Life

    Directory of Open Access Journals (Sweden)

    Andreas W. Hempel

    2013-11-01

    Full Text Available O2 sensors were used to non-destructively monitor O2 levels in commercially packed pre-cooked, convenience modified atmosphere packaging (MAP foods. A substantial level of O2 (>15% was present in packs resulting in a shorter than expected shelf-life, where the primary spoilage mechanism was found to be mould. Various combinations of vacuum (0–0.6 MPa and gas flush (0.02–0.03 MPa (30% CO2/70% N2 settings were assessed as treatments that result in the desired shelf-life (28 days. This was achieved using the combined treatment of vacuum 0.35 MPa and gas flush 0.02 MPa which resulted in a reduction of 6%–9% O2 in all three samples (battered sausages (BS, bacon slices (BA, and meat and potato pies (PP. Reduced O2 levels reflect the microbial quality of products, which has been successfully reduced. Duplicate samples of all product packs were produced using ethanol emitters (EE to see if shelf-life could be further extended. Results showed a further improvement in shelf-life to 35 days. Sensory analysis showed that ethanol flavour and aroma was not perceived by panellists in two of the three products assessed. This study demonstrates how smart packaging technologies, both intelligent and active, can be used to assist in the modification of conventional packaging systems in order to enhance product quality and safety and through the extension of product shelf-life.

  8. Life cycle assessment of products and technologies. LCA Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Koukkari, H.; Nors, M. (eds.)

    2009-12-15

    VTT Technical Research Centre of Finland organised a Symposium 'Life Cycle Assessment of Products and Technologies' on the 6th of October, 2009. The Symposium gave a good overview of methods, tools and applications of Life Cycle Assessment developed and utilised in several technology fields of VTT. The 12 Symposium papers deal with recent LCA studies on products and technologies. The scope ranges from beverage cups to urban planning, from inventory databases to rating systems. Topical issues relating to climate change concern biorefineries and the overall impacts of the utilisation of biomass. The calculation of carbon footprints is also introduced through paper products and magazines. One example of LCA tools developed at VTT addresses cement manufacturing. VTT's transport emission database, LIPASTO, was introduced in detail. The use of LCA methods and life cycle thinking is described in various contexts: product development in relation to precision instruments; selection of materials and work processes in relation to sediment remediation project; and procedures of sustainability rating through VTT's office building Digitalo. The Climate Bonus project presented a demonstrated ICT support that informs about the greenhouse gas emissions and carbon footprints of households. (orig.)

  9. A Study on Shelf Life Prolonging Process of Chili Soy Sauce in Malaysian SMEs’ (Small Medium Enterprise)

    Science.gov (United States)

    Mat Sharif, Zainon Binti; Taib, Norhasnina Binti Mohd; Yusof, Mohd Sallehuddin Bin; Rahim, Mohammad Zulafif Bin; Tobi, Abdul Latif Bin Mohd; Othman, Mohd Syafiq Bin

    2017-05-01

    This research paper presents the possible solutions to prolong the shelf life of spicy (chili) soy sauce. The current spicy soy sauce formulation is without adding preservative which result in shorter shelf life. It is suggested to add chemical preservative to this spicy soy sauce in order to prolong its shelf life without jeopardising its prevailing taste. The proposed preservative is sodium benzoate. It is hope that by adding sodium benzoate, it can prolong the shelf life of the products from one year to two years without jeopardising the taste and quality of the products. The problem to extend the shelf life of spicy (chilli) soy sauce was 100% solved. The product could be extended to 2 years without adding any preservative (sodium benzoate) as the main raw material (soy sauce) purchased from “Kicap Jalen” had been added sodium benzoate as their preservative to prolong the soy sauce shelf life. All the physicochemical and nutritional analysis shown good results. As for the microbiological analysis, all the 3 samples shown good results on the total plate count.

  10. The effect of life expectancy on aggression and generativity: a life history perspective.

    Science.gov (United States)

    Dunkel, Curtis S; Mathes, Eugene; Papini, Dennis R

    2010-09-23

    Following a model that is inclusive of both dispositional and situational influences on life-history behaviors and attitudes, the effect of life expectancies on aggression and generativity was examined. Consistent with the hypotheses it was found that shorter life expectancies led to an increase in the desire to aggress and a decrease in the desire to engage in generative behaviors. The results are discussed in terms of how life history theory can be used to frame research on person-situation interactions.

  11. Short communication: Feed utilization and its associations with fertility and productive life in 11 commercial Pennsylvania tie-stall herds.

    Science.gov (United States)

    Vallimont, J E; Dechow, C D; Daubert, J M; Dekleva, M W; Blum, J W; Liu, W; Varga, G A; Heinrichs, A J; Baumrucker, C R

    2013-02-01

    The objectives of this study were to quantify the relationships of various definitions of feed utilization with both fertility and productive life. Intake and body measurement data were collected monthly on 970 cows in 11 tie-stall herds for 6 consecutive months. Measures of feed utilization for this study were dry matter intake (DMI), dry matter intake efficiency (DME, defined as 305-d fat-corrected milk/305-d DMI), DME with intake adjusted for maintenance requirements (DMEM), crude protein efficiency (defined as 305-d protein yield/305-d crude protein intake), and 2 definitions of residual feed intake (RFI). The first, RFI(reg), was calculated by regressing daily DMI on daily milk, fat, and protein yields, body weight (BW), daily body condition score (BCS) gain or loss, the interaction between BW and BCS gain or loss, and days in milk. The second, RFI(NRC), was estimated by subtracting 305-d DMI predicted according to their fat-corrected milk and BW from actual 305-d DMI. Data were analyzed with 8-trait animal models and included one measure of feed utilization and milk, fat, and protein yields, BW, BCS, days open (DO), and productive life (PL). The genetic correlation between DME and DO was 0.53 (± 0.19) and that between DME and PL was 0.66 (± 0.10). These results show that cows who had higher feed efficiency had greater DO (undesirable) and greater PL (desirable). Results were similar for the genetic correlation between DO and crude protein efficiency (0.42). Productive life had genetic correlations of -0.22 with BW and -0.48 with BCS, suggesting that larger, fatter cows in this study had shorter PL. Correlations between estimated breeding values for feed utilization and official sire genetic evaluations for fertility were in agreement with the results from the multiple-trait models. Selection programs intended to enhance feed efficiency should factor relationships with functional traits to avoid unfavorable effects on cow fertility. Copyright © 2013

  12. THE EFFICIENCY OF PROMOTIONAL INSTRUMENTS RELATED TO THE PRODUCT LIFE CYCLE STAGES

    Directory of Open Access Journals (Sweden)

    MIHAELA MARCU

    2010-01-01

    Full Text Available Regarded as a planning tool, PLC (product life cycle strongly contributes to the identification of the main marketing challenges that may arise throughout the life of a product/service. Thus, the marketing management has the opportunity to develop and implement those solutions designed to optimize each of the 4P of marketing mix: product (quality, price, distribution (placement and promotion. The communication program has an essential role, because the company presents through it its "product" to actual or potential customers in order to convince them of the benefits of purchasing/using it. The efficiency of the promotional instruments involves an appropriate allocation of funds needed to promote the product/service in relation to the stage of its life cycle.

  13. Sources of New Life Insurance Product Ideas in LIC of India

    Directory of Open Access Journals (Sweden)

    Furquan Uddin

    2018-06-01

    Full Text Available The present complex nature of market has created sturdy challenges before the business world in the form of designing right product, right price, right placement and right promotion. In order to survive and thrive, a marketer has to focus on these challenges. Amongst, right product is most crucial which requires good and feasible ideas in all industries including life insurance. In fact, life insurance is perceived as an unsought and complicated financial product in India. The present paper is a humble attempt to examine the sources of new life insurance product ideas in LIC of India. The findings of the present study include the sources into six groups such as key stakeholders, workforce, organizational documents and other sources, research unit, competitors, and national and international source. It may be noticed the key stakeholders like Insurance Regulatory and Development Authority of India, actuary, top management, and policyholders play vital role in providing ideas in the new product development process of LIC of India.

  14. Towards a life cycle sustainability assessment: making informed choices on products

    Energy Technology Data Exchange (ETDEWEB)

    Ciroth, Andreas [GreenDeltaTC, Berlin (Germany); Finkbeiner, Matthias; Traverso, Marzia [TU Berlin (Germany); Hildenbrand, Jutta [Chalmers University (United States); Kloepffer, Walter [Editor-in-Chief of the International Journal of Life Cycle Assessment (Germany); Mazijn, Bernard [Ghent University (Belgium); Prakash, Siddharth [Oeko-Institut (Germany); Sonnemann, Guido; Valdivia, Sonia [UNEP (France); Ugaya, Cassia Maria Lie [Technological Federal University of Parana, ACV (Brazil); Vickery-Niederman, Gina [University of Arkansas (United States)

    2011-07-01

    In this introduction to the concept of life cycle sustainability assessment (LCSA), we acknowledge the foundations laid by previous works and initiatives. One such initiative has been the ISO 14040 series (Environmental management -- Life cycle assessment -- Principles and framework), which in addition to the ISO 26000: Social Responsibility Guidance Standard, and the contribution of a number of international initiatives (Appendix A) have been essential for the development of this publication. The life cycle of a product involves flows of material, energy and money. Nonetheless, the picture is not complete unless we look also at the production and consumption impacts on all actors along the 'value chain' -- workers, local communities, consumers and society itself. Different life cycle assessment techniques allow individuals and enterprises to assess the impact of their purchasing decisions and production methods along different aspects of this value chain. An (Environmental) life cycle assessment (LCA) looks at potential impacts to the environment as a result of the extraction of resources, transportation, production, use, recycling and discarding of products; life cycle costing (LCC) is used to assess the cost implications of this life cycle; and social life cycle assessment (S-LCA) examines the social consequences. However, in order to get the 'whole picture', it is vital to extend current life cycle thinking to encompass all three pillars of sustainability: (i) environmental, (ii) economic and (iii) social. This means carrying out an assessment based on environmental, economic and social issues -- by conducting an overarching life cycle sustainability assessment (LCSA). This publication shows how all three techniques -- which all share similar methodological frameworks and aims -- can be combined to make the move towards an overarching LCSA possible. Because it is holistic, systemic and rigorous, (environmental) LCA is the preferred technique

  15. Towards a life cycle sustainability assessment: making informed choices on products

    Energy Technology Data Exchange (ETDEWEB)

    Ciroth, Andreas [GreenDeltaTC, Berlin (Germany); Finkbeiner, Matthias; Traverso, Marzia [TU Berlin (Germany); Hildenbrand, Jutta [Chalmers University (United States); Kloepffer, Walter [Editor-in-Chief of the International Journal of Life Cycle Assessment (Germany); Mazijn, Bernard [Ghent University (Belgium); Prakash, Siddharth [Oeko-Institut (Germany); Sonnemann, Guido; Valdivia, Sonia [UNEP (France); Ugaya, Cassia Maria Lie [Technological Federal University of Parana, ACV (Brazil); Vickery-Niederman, Gina [University of Arkansas (United States)

    2011-07-01

    In this introduction to the concept of life cycle sustainability assessment (LCSA), we acknowledge the foundations laid by previous works and initiatives. One such initiative has been the ISO 14040 series (Environmental management -- Life cycle assessment -- Principles and framework), which in addition to the ISO 26000: Social Responsibility Guidance Standard, and the contribution of a number of international initiatives (Appendix A) have been essential for the development of this publication. The life cycle of a product involves flows of material, energy and money. Nonetheless, the picture is not complete unless we look also at the production and consumption impacts on all actors along the 'value chain' -- workers, local communities, consumers and society itself. Different life cycle assessment techniques allow individuals and enterprises to assess the impact of their purchasing decisions and production methods along different aspects of this value chain. An (Environmental) life cycle assessment (LCA) looks at potential impacts to the environment as a result of the extraction of resources, transportation, production, use, recycling and discarding of products; life cycle costing (LCC) is used to assess the cost implications of this life cycle; and social life cycle assessment (S-LCA) examines the social consequences. However, in order to get the 'whole picture', it is vital to extend current life cycle thinking to encompass all three pillars of sustainability: (i) environmental, (ii) economic and (iii) social. This means carrying out an assessment based on environmental, economic and social issues -- by conducting an overarching life cycle sustainability assessment (LCSA). This publication shows how all three techniques -- which all share similar methodological frameworks and aims -- can be combined to make the move towards an overarching LCSA possible. Because it is holistic, systemic and rigorous, (environmental) LCA is the preferred technique when it comes to

  16. Shelf Life of Food Products: From Open Labeling to Real-Time Measurements.

    Science.gov (United States)

    Corradini, Maria G

    2018-03-25

    The labels currently used on food and beverage products only provide consumers with a rough guide to their expected shelf lives because they assume that a product only experiences a limited range of predefined handling and storage conditions. These static labels do not take into consideration conditions that might shorten a product's shelf life (such as temperature abuse), which can lead to problems associated with food safety and waste. Advances in shelf-life estimation have the potential to improve the safety, reliability, and sustainability of the food supply. Selection of appropriate kinetic models and data-analysis techniques is essential to predict shelf life, to account for variability in environmental conditions, and to allow real-time monitoring. Novel analytical tools to determine safety and quality attributes in situ coupled with modern tracking technologies and appropriate predictive tools have the potential to provide accurate estimations of the remaining shelf life of a food product in real time. This review summarizes the necessary steps to attain a transition from open labeling to real-time shelf-life measurements.

  17. Updating of U.S. Wood Product Life-Cycle Assessment Data for Environmental Product Declarations

    Science.gov (United States)

    Richard Bergman; Elaine Oneil; Maureen Puettmann; Ivan Eastin; Indroneil Ganguly

    2014-01-01

    The marketplace has an increasing desire for credible and transparent product eco-labels based on life-cycle assessment (LCA) data, especially involving international trade. Over the past several years, stakeholders in the U.S. wood products industry have developed many such “eco-labels” under the ISO standard of LCA-based environmental product declarations (EPDs). The...

  18. Evaluating natural resource amenities in a human life expectancy production function

    Science.gov (United States)

    Neelam C. Poudyal; Donald G. Hodges; J.M. Bowker; H.K. Cordell

    2009-01-01

    This study examined the effect of natural resource amenities on human life expectancy. Extending theexisting model of the life expectancy production function, and correcting for spatial dependence, weevaluated the determinants of life expectancy using county level data. Results indicate that after controlling

  19. The utilisation of the product life cycle concept in South African banks dealing with mortgage products and markets

    Directory of Open Access Journals (Sweden)

    F. J. Herbst

    2005-12-01

    Full Text Available The purpose of the study as demarcated in this article was to test the use of the product life cycle concept (PLC theory among marketing decision-makers and product decision-makers dealing with mortgage products and markets in the leading South African Banks. The main focus was to test the application and likelihood to use the PLC assumptions provided by Kotler (2003:340 on marketing characteristics, described marketing objectives and the proposed marketing strategies in the four PLC phases. A major finding was that the majority of these decision-makers in banks indicated a high likelihood of continuing to use the product life cycle concept. Another important conclusion of this study was that further empirical research is needed to develop product life cycle concept assumptions to be inclusive of the intangible nature linked to the marketing of services.

  20. Microgreens: Production, shelf life, and bioactive components.

    Science.gov (United States)

    Mir, Shabir Ahmad; Shah, Manzoor Ahmad; Mir, Mohammad Maqbool

    2017-08-13

    Microgreens are emerging specialty food products which are gaining popularity and increased attention nowadays. They are young and tender cotyledonary leafy greens that are found in a pleasing palette of colors, textures, and flavors. Microgreens are a new class of edible vegetables harvested when first leaves have fully expanded and before true leaves have emerged. They are gaining popularity as a new culinary ingredient. They are used to enhance salads or as edible garnishes to embellish a wide variety of other dishes. Common microgreens are grown mainly from mustard, cabbage, radish, buckwheat, lettuce, spinach, etc. The consumption of microgreens has nowadays increased due to higher concentrations of bioactive components such as vitamins, minerals, and antioxidants than mature greens, which are important for human health. However, they typically have a short shelf life due to rapid product deterioration. This review aimed to evaluate the postharvest quality, potential bioactive compounds, and shelf life of microgreens for proper management of this specialty produce.

  1. The development and validation of a shorter version of the Canadian Health Care Evaluation Project Questionnaire (CANHELP Lite): a novel tool to measure patient and family satisfaction with end-of-life care.

    Science.gov (United States)

    Heyland, Daren K; Jiang, Xuran; Day, Andrew G; Cohen, S Robin

    2013-08-01

    The recently developed Canadian Health Care Evaluation Project (CANHELP) questionnaire, which can be used to assess both patient and family satisfaction with end-of-life care, takes 40-60 minutes to complete. The length of the interview may limit its uptake and clinical utility; a shorter version would make its use more feasible. The purpose of this study was to develop and validate a shorter version of the CANHELP questionnaire. Data were collected using a cross-sectional survey of patients with advanced medical diseases and their family members. Participants completed the long version of CANHELP, a global rating of satisfaction with care (GRS), the FAMCARE scale (family members only), and a quality-of-life (QOL) questionnaire. We reduced the items on the long version based on their relationship to the GRS, the frequency of missing data, the distribution of responses, the redundancy of the items, and focus groups with frontline users. With the remaining items, we assessed internal consistency using Cronbach's alpha, and evaluated construct validity by describing the correlation of the new CANHELP Lite with the full version of CANHELP, GRS, FAMCARE, and the QOL questionnaire scores. A total of 363 patients and 193 family members participated in this study. The patient version was reduced from 37 items to 20 items and the caregiver version was reduced from 38 items to 21 items. Cronbach's alphas ranged from 0.68 to 0.93 for all domains of both the patient and caregiver questionnaires. We observed a high degree of correlation between CANHELP Lite domains and overall scores and the same domains and overall scores for the full version of CANHELP. In addition, we observed moderate to strong correlation between the CANHELP Lite overall satisfaction scores and the GRS questions. There was moderate correlation between the overall family member CANHELP Lite score and overall FAMCARE score (r = 0.45) and this was similar to the correlation between the full version of

  2. An approach to incorporate risks into a product's life-cycle assessment

    International Nuclear Information System (INIS)

    Pirhonen, P.

    1995-01-01

    Life-cycle assessment is usually based on regular discharges that occur at a more or less constant rate. Nevertheless, the more factors that are taken into account in the LCA the better picture it gives on the environmental aspects of a product. In this study an approach to incorporate accidental releases into a products' life-cycle assessment was developed. In this approach accidental releases are divided into two categories. The first category consists of those unplanned releases which occur with a predicted level and frequency. Due to the high frequency and small release size at a time, these accidental releases can be compared to continuous emissions. Their global impacts are studied in this approach. Accidental releases of the second category are sudden, unplanned releases caused by exceptional situations, e.g. technical failure, action error or disturbances in process conditions. These releases have a singular character and local impacts are typical of them. As far as the accidental releases of the second category are concerned, the approach introduced in this study results in a risk value for every stage of a life-cycle, the sum of which is a risk value for the whole life-cycle. Risk value is based on occurrence frequencies of incidents and potential environmental damage caused by releases. Risk value illustrates the level of potential damage caused by accidental releases related to the system under study and is meant to be used for comparison of these levels of two different products. It can also be used to compare the risk levels of different stages of the life-cycle. An approach was illustrated using petrol as an example product. The whole life-cycle of petrol from crude oil production to the consumption of petrol was studied

  3. Regional distribution and losses of end-of-life steel throughout multiple product life cycles-Insights from the global multiregional MaTrace model.

    Science.gov (United States)

    Pauliuk, Stefan; Kondo, Yasushi; Nakamura, Shinichiro; Nakajima, Kenichi

    2017-01-01

    Substantial amounts of post-consumer scrap are exported to other regions or lost during recovery and remelting, and both export and losses pose a constraint to desires for having regionally closed material cycles. To quantify the challenges and trade-offs associated with closed-loop metal recycling, we looked at the material cycles from the perspective of a single material unit and trace a unit of material through several product life cycles. Focusing on steel, we used current process parameters, loss rates, and trade patterns of the steel cycle to study how steel that was originally contained in high quality applications such as machinery or vehicles with stringent purity requirements gets subsequently distributed across different regions and product groups such as building and construction with less stringent purity requirements. We applied MaTrace Global, a supply-driven multiregional model of steel flows coupled to a dynamic stock model of steel use. We found that, depending on region and product group, up to 95% of the steel consumed today will leave the use phase of that region until 2100, and that up to 50% can get lost in obsolete stocks, landfills, or slag piles until 2100. The high losses resulting from business-as-usual scrap recovery and recycling can be reduced, both by diverting postconsumer scrap into long-lived applications such as buildings and by improving the recovery rates in the waste management and remelting industries. Because the lifetimes of high-quality (cold-rolled) steel applications are shorter and remelting occurs more often than for buildings and infrastructure, we found and quantified a tradeoff between low losses and high-quality applications in the steel cycle. Furthermore, we found that with current trade patterns, reduced overall losses will lead to higher fractions of secondary steel being exported to other regions. Current loss rates, product lifetimes, and trade patterns impede the closure of the steel cycle.

  4. The impact of extended half-life versus conventional factor product on hemophilia caregiver burden.

    Science.gov (United States)

    Schwartz, Carolyn E; Powell, Victoria E; Su, Jun; Zhang, Jie; Eldar-Lissai, Adi

    2018-05-01

    Extended half-life factor products have reduced annualized bleeding rates in hemophilia patients. The impact of extended half-life versus conventional factor products on hemophilia caregiver burden has not been investigated. This study aimed to evaluate caregiver burden in extended half-life versus conventional factor products for hemophilia A and B. This cross-sectional web-based study of caregivers of people with hemophilia A or B was recruited from a panel research company and by word of mouth. Participants completed the Hemophilia Caregiver Impact measure, the PedsQL Family Impact Module (PedsQL), and the Work Productivity and Activity Impairment Questionnaire (WPAI). We also collected demographic, insurance coverage, and medical information related to the hemophilia patient(s). Burden differences were assessed using linear regression and matched cohort analyses. The sample (n = 448) included 49 people who were caring for people on extended half-life factor products. Worse caregiver burden was associated with more infusions per week and more bleeds in the past 6 months. Regression analyses suggested that caring for someone who is on a extended half-life factor product is associated with lower emotional impact (β = - 0.11, p factor product had lower Emotional Impact and Practical Impact scores (t = - 2.95 and - 2.94, respectively, p factor product infusions of extended half-life factor products appears to reduce the emotional distress and practical burden of caregiving. Future work should evaluate the longitudinal impact.

  5. The power of the kashrut: older but shorter. The impact of religious nutritional and hygienic rules on stature and life expectancy of Jewish conscripts in the early 19th century.

    Science.gov (United States)

    Tassenaar, V; Karel, E H

    2016-06-01

    We test the impact of several demographic, economic and social factors on stature in an early nineteenth century environment. We use a database of conscripts from the period 1818-1860 of a rural province in The Netherlands (Drenthe). This area had a rather high biological standard of living. This database of 413 conscripts contains information about family structure, family rank order, height, tax income, occupation and age of death. Conscripts came from two communities: one from a particular village (Oosterhesselen) and the other was Jewish conscripts that came from the countryside of the province. Our statistical analysis shows a positive significant relationship between family size and height, which confirms the resource dilution theory. Remarkably, the sign of the relation between family size and life expectancy is inverse. Other factors such as the potato crisis and income had the expected effect on conscript heights. The community effect was strong. Jewish conscripts were much shorter than their counterparts. Access to nutrition, the specific food laws and other factors can explain this difference. An increasing sibship size had a negative impact on body height but positive effects on life expectancy when adulthood was reached. Specifically for the Jewish community was the positive effect of the death of the father on conscript height. The mechanisms behind this phenomenon are unclear and open for further research.

  6. Development of fatigue life evaluation method using small specimen

    International Nuclear Information System (INIS)

    Nogami, Shuhei; Nishimura, Arata; Wakai, Eichi; Tanigawa, Hiroyasu; Itoh, Takamoto; Hasegawa, Akira

    2013-01-01

    For developing the fatigue life evaluation method using small specimen, the effect of specimen size and shape on the fatigue life of the reduced activation ferritic/martensitic steels (F82H-IEA, F82H-BA07 and JLF-1) was investigated by the fatigue test at room temperature in air using round-bar and hourglass specimens with various specimen sizes (test section diameter: 0.85–10 mm). The round-bar specimen showed no specimen size and no specimen shape effects on the fatigue life, whereas the hourglass specimen showed no specimen size effect and obvious specimen shape effect on it. The shorter fatigue life of the hourglass specimen observed under low strain ranges could be attributed to the shorter micro-crack initiation life induced by the stress concentration dependent on the specimen shape. On the basis of this study, the small round-bar specimen was an acceptable candidate for evaluating the fatigue life using small specimen

  7. Work-Life Balance: the Links with Management Practices and Productivity

    OpenAIRE

    Nick Bloom; Tobias Kretschmer; John Van Reenen

    2006-01-01

    Does good management and higher productivity come at the expense of work-life balance? Or is good work-life balance an important component of the management of successful firms? New research by Nick Bloom, Tobias Kretschmer and John Van Reenen finds evidence for a hybrid view between these two polar extremes.

  8. Energy Production and Transmutation of Nuclear Waste by Accelerator Driven Systems

    Science.gov (United States)

    Zhivkov, P. K.

    2018-05-01

    There is a significant amount of highly radiotoxic long-life nuclear waste (NW) produced by NPP (Nuclear Power Plants). Transmutation is a process which transforms NW into less radiotoxic nuclides with a shorter period of half-life by spallation neutrons or radiative capture of neutrons produced by ADS (Accelerator Driven System). In the processes of transmutation new radioactive nuclides are produced. ADS is big energy consumer equipment. It is a method for production of a high-flux and high-energy neutron field. All these processes occur in ADS simultaneously. ADS is able to transmute actinides and produce energy simultaneously. The article considers the energy production problems in ADS. Several ideas are developed regarding the solution of the global energy supply.

  9. The Glycated Albumin (GA) to HbA1c Ratio Reflects Shorter-Term Glycemic Control than GA: Analysis of Patients with Fulminant Type 1 Diabetes.

    Science.gov (United States)

    Koga, Masafumi; Inada, Shinya; Nakao, Taisei; Kawamori, Ryuzo; Kasayama, Soji

    2017-01-01

    Glycated albumin (GA) reflects shorter-term glycemic control than HbA1c. We have reported that HbA1c is paradoxically increased in diabetic patients whose glycemic control deteriorated before ameliorating. In this study, we analyzed paradoxical increases of glycemic control indicators after treatment in patients with fulminant type 1 diabetes (FT1D). We also investigated whether the GA/HbA1c ratio may reflect shorter-term glycemic control than GA. Five FT1D patients whose post-treatment HbA1c and GA levels were measured were enrolled. We also used a formula to estimate HbA1c and GA from the fictitious models of changes in plasma glucose in FT1D patients. In this model, the periods during which HbA1c, GA, and the GA/HbA1c ratio were higher than at the first visit were compared. In addition, the half-life for the GA/HbA1c ratio was calculated in accordance with the half-lives for HbA1c and GA (36 and 14 days, respectively). In all FT1D patients, HbA1c levels 2-4 weeks after treatment were increased, with three patients (60%) experiencing an increase of GA levels. In contrast, an increase of the GA/HbA1c ratio was observed in only one patient. In all of the different models of changes in plasma glucose in FT1D patients, the length of time during which the values were higher than at the first visit was in the order of HbA1c > GA > GA/HbA1c ratio. The half-life for the GA/HbA1c ratio was 9 days, shorter than GA. These findings suggest that the GA/HbA1c ratio reflects shorter-term glycemic control than GA. © 2016 Wiley Periodicals, Inc.

  10. 76 FR 41525 - Hewlett Packard Global Parts Supply Chain, Global Product Life Cycles Management Unit Including...

    Science.gov (United States)

    2011-07-14

    ... Parts Supply Chain, Global Product Life Cycles Management Unit Including Teleworkers Reporting to... workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit...). Since eligible workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles...

  11. Shorter height is related to lower cardiovascular disease risk – A narrative review

    Directory of Open Access Journals (Sweden)

    Thomas T. Samaras

    2013-01-01

    Full Text Available Numerous Western studies have shown a negative correlation between height and cardiovascular disease. However, these correlations do not prove causation. This review provides a variety of studies showing short people have little to no cardiovascular disease. When shorter people are compared to taller people, a number of biological mechanisms evolve favoring shorter people, including reduced telomere shortening, lower atrial fibrillation, higher heart pumping efficiency, lower DNA damage, lower risk of blood clots, lower left ventricular hypertrophy and superior blood parameters. The causes of increased heart disease among shorter people in the developed world are related to lower income, excessive weight, poor diet, lifestyle factors, catch-up growth, childhood illness and poor environmental conditions. For short people in developed countries, the data indicate that a plant-based diet, leanness and regular exercise can substantially reduce the risk of cardiovascular disease.

  12. Shelf life and safety concerns of bakery products--a review.

    Science.gov (United States)

    Smith, James P; Daifas, Daphne Phillips; El-Khoury, Wassim; Koukoutsis, John; El-Khoury, Anis

    2004-01-01

    Bakery products are an important part of a balanced diet and, today, a wide variety of such products can be found on supermarket shelves. This includes unsweetened goods (bread, rolls, buns, crumpets, muffins and bagels), sweet goods (pancakes, doughnuts, waffles and cookies) and filled goods (fruit and meat pies, sausage rolls, pastries, sandwiches, cream cakes, pizza and quiche). However, bakery products, like many processed foods, are subject to physical, chemical and microbiological spoilage. While physical and chemical spoilage limits the shelf life of low and intermediate moisture bakery products, microbiological spoilage by bacteria, yeast and molds is the concern in high moisture products i.e., products with a water activity (a(w)) > 0.85. Furthermore, several bakery products also have been implicated infoodborne illnesses involving Salmonella spp., Listeria monoctyogenes and Bacillus cereus, while Clostridium botulinum is a concern in high moisture bakery products packaged under modified atmospheres. This extensive review is divided into two parts. Part I focuses on the spoilage concerns of low, intermediate and high moisture bakery products while Part II focuses on the safety concerns of high moisture bakery products only. In both parts, traditional and novel methods of food preservation that can be used by the bakery industry to extend the shelf life and enhance the safety of products are discussed in detail.

  13. Productivity at work and quality of life in patients with rheumatoid arthritis.

    Science.gov (United States)

    van Vilsteren, Myrthe; Boot, Cecile R L; Knol, Dirk L; van Schaardenburg, Dirkjan; Voskuyl, Alexandre E; Steenbeek, Romy; Anema, Johannes R

    2015-05-06

    The aim of this study was to determine which combination of personal, disease-related and environmental factors is best associated with at-work productivity loss in patients with rheumatoid arthritis (RA), and to determine whether at-work productivity loss is associated with the quality of life for these patients. This study is based on cross-sectional data. Patients completed a questionnaire with personal, disease-related and environmental factors (related to the work environment), and clinical characteristics were obtained from patient medical records. At-work productivity loss was measured with the Work Limitations Questionnaire, and quality of life with the RAND 36. Using linear regression analyses, a multivariate model was built containing the combination of factors best associated with at-work productivity loss. This model was cross-validated internally. We furthermore determined whether at-work productivity loss was associated with quality of life using linear regression analyses. We found that at-work productivity loss was associated with workers who had poorer mental health, more physical role limitations, were ever treated with a biological therapeutic medication, were not satisfied with their work, and had more work instability (R(2) = 0.50 and R(2) following cross-validation was 0.32). We found that at-work productivity loss was negatively associated with health-related quality of life, especially with dimensions of mental health, physical role limitations, and pain. We found that at-work productivity loss was associated with personal, work-related, and clinical factors. Although our study results should be interpreted with caution, they provide insight into patients with RA who are at risk for at-work productivity loss.

  14. Life-cycle analysis of product integrated polymer solar cells

    DEFF Research Database (Denmark)

    Espinosa Martinez, Nieves; García-Valverde, Rafael; Krebs, Frederik C

    2011-01-01

    A life cycle analysis (LCA) on a product integrated polymer solar module is carried out in this study. These assessments are well-known to be useful in developmental stages of a product in order to identify the bottlenecks for the up-scaling in its production phase for several aspects spanning from...... economics through design to functionality. An LCA study was performed to quantify the energy use and greenhouse gas (GHG) emissions from electricity use in the manufacture of a light-weight lamp based on a plastic foil, a lithium-polymer battery, a polymer solar cell, printed circuitry, blocking diode......, switch and a white light emitting semiconductor diode. The polymer solar cell employed in this prototype presents a power conversion efficiency in the range of 2 to 3% yielding energy payback times (EPBT) in the range of 1.3–2 years. Based on this it is worthwhile to undertake a life-cycle study...

  15. Product Development and Commercialization of Diagnostic or Life Science Products for Scientists and Researchers.

    Science.gov (United States)

    Alonso, Meghan M

    2017-01-01

    Commercializing a diagnostic or life science product often encompasses different goals than that of research and grant funding. There are several necessary steps, and a strategy needs to be well defined in order to be successful. Product development requires input from and between various groups within a company and, for academia, outside entities. The product development stakeholder groups/entities are research, marketing, development, regulatory, manufacturing, clinical, safety/efficacy, and quality. After initial research and development, much of the work in product development can be outsourced or jointly created using public-private partnerships. This chapter serves as an overview of the product development process and provides a guide to best define a product strategy.

  16. Mixed-Integer Linear Programming approaches to shelf-life-integrated planning and scheduling in yoghurt production

    NARCIS (Netherlands)

    Lütke Entrup, M.; Günther, H.O.; Beek, van P.; Grunow, M.; Seiler, T.

    2005-01-01

    In the production of perishable products such as dairy, meat or bakery goods, the consideration of shelf life in production planning is of particular importance. Retail customers with relatively low inventory turns can benefit significantly from longer product shelf life as wastage and out-of-stock

  17. Loss of Work Productivity and Quality of Life in Patients With Autoimmune Bullous Dermatoses.

    Science.gov (United States)

    Heelan, K; Hitzig, S L; Knowles, S; Drucker, A M; Mittmann, N; Walsh, S; Shear, N H

    2015-01-01

    Little is known about quality of life and work productivity in autoimmune bullous dermatoses (AIBDs). To determine the impact of AIBDs on quality of life and work productivity. An observational cross-sectional study took place between February and May 2013 at an AIBD tertiary referral centre. Ninety-four patients were included. All participants completed the Dermatology Life Quality Index and the Work Productivity and Activity Impairment-Specific Health Problem questionnaires. Responders to treatment had less impairment (Pwork missed. Those with a higher Dermatology Life Quality Index score had greater work impairment and overall activity impairment (P=.041, P=.024). Nonresponders had increased impairment while working (Pwork impairment (PWork Productivity and Activity Impairment Questionnaire domains. AIBD has the potential to be a large burden on ability to work and quality of life. Larger studies are needed to clarify how these domains change over time and whether or not they improve with treatment. © The Author(s) 2015.

  18. The importance of work or productive activity in life care planning and case management.

    Science.gov (United States)

    Reid, Christine; Riddick-Grisham, Susan

    2015-01-01

    The importance of work or productive activity for the well-being, community integration, and quality of life of people living with disabilities is addressed, with implications for life care planning and case management. The role of work or productive activity in our society, and consequences of deprivation if rehabilitation services do not address vocational effects of disabilities, is explored. A continuum of productivity options is introduced; types of vocational rehabilitation assessment processes and interventions are described. The role of vocational rehabilitation services in life care planning and case management is discussed, focusing on quality of life for people living with disabilities. Rehabilitation and health care professionals should understand the importance of work or other productive activity, and support the development of appropriate plans to address those needs among people who have disabilities.

  19. Absorbent products for incontinence: 'treatment effects' and impact on quality of life.

    Science.gov (United States)

    Getliffe, Kathryn; Fader, Mandy; Cottenden, Alan; Jamieson, Katharine; Green, Nicholas

    2007-10-01

    This study aimed to determine how the use and characteristics of absorbent products for incontinence impact on women's quality of life, and to examine the concept of 'treatment effects' in the context of pad use. Key pad performance characteristics were identified from the literature and focus group work. Semi-structured interviews with 99 women with light incontinence were used to investigate the impact of pad use on women's quality of life, including both positive and negative 'treatment effects', and to rank pad characteristics by their importance. Achieving effective and discrete containment of urine was the dominant factor impacting on women's lives. Sub-themes embraced physical effects, psychological impact and social functioning. The five pad characteristics ranked most important for day time use were: 'to hold urine, to contain smell, to stay in place, discreteness, and comfort when wet. For night use discreteness was replaced by to keep skin dry'. High levels of reported anxiety were associated with perceived risk of poor pad performance, lack of discreteness and need for complex regimes for pad management. Insufficient attention has been paid to the balance between the beneficial and negative treatment effects of absorbent pads to date. Existing continence-related quality of life measures are not designed for conditions where change in symptoms is not an outcome measure. The study findings provide the basis for developing a more sensitive, patient-oriented, quality of life measure for pad-users which can aid product selection, new product development and inform future evaluative comparisons between products/products and treatments. This paper illustrates the complex influence on quality of life caused by using absorbent pads to contain incontinence. It raises awareness of the importance of careful selection of the most appropriate pad for each individual to minimize unfavourable side effects, and the need for a new quality of life measure designed for pad-users.

  20. End-of-Life Medical Spending In Last Twelve Months of Life is Lower than Previously Reported

    DEFF Research Database (Denmark)

    French, Eric; Aragon, Maria; Mccauley, Jeremy

    2017-01-01

    Although end-of-life medical spending is often viewed as a major component of aggregate medical expenditure, accurate measures of this type of medical spending are scarce. We used detailed health care data for the period 2009–11 from Denmark, England, France, Germany, Japan, the Netherlands, Taiw...... but to spending on people with chronic conditions, which are associated with shorter life expectancies....

  1. ANALYSIS OF RISK FACTORS AT THE STAGE OF THE PRODUCT LIFE CYCLE

    Directory of Open Access Journals (Sweden)

    N. Skopenko

    2016-10-01

    Full Text Available The article outlines and summarizes the risks of enterprises at different stages of product life cycle. A diagnose and assess of risks according to the main stages of the product development are offered. Groups of factors that shape the economic risks at different stages of the product life cycle, by the possible negative consequences of their impact are formulated. To reduce the probable losses of the company and a reasonable assortment portfolio formation generalized classification of risks that are typical for any company is proposed.

  2. Product-related research: how research can contribute to successful life-cycle management.

    Science.gov (United States)

    Sandner, Peter; Ziegelbauer, Karl

    2008-05-01

    Declining productivity with decreasing new molecular entity output combined with increased R&D spending is one of the key challenges for the entire pharmaceutical industry. In order to offset decreasing new molecular entity output, life-cycle management activities for established drugs become more and more important to maintain or even expand clinical indication and market opportunities. Life-cycle management covers a whole range of activities from strategic pricing to a next generation product launch. In this communication, we review how research organizations can contribute to successful life-cycle management strategies using phosphodiesterase 5 inhibitors as an example.

  3. Microalgal biomass production pathways: evaluation of life cycle environmental impacts.

    Science.gov (United States)

    Zaimes, George G; Khanna, Vikas

    2013-06-20

    Microalgae are touted as an attractive alternative to traditional forms of biomass for biofuel production, due to high productivity, ability to be cultivated on marginal lands, and potential to utilize carbon dioxide (CO2) from industrial flue gas. This work examines the fossil energy return on investment (EROIfossil), greenhouse gas (GHG) emissions, and direct Water Demands (WD) of producing dried algal biomass through the cultivation of microalgae in Open Raceway Ponds (ORP) for 21 geographic locations in the contiguous United States (U.S.). For each location, comprehensive life cycle assessment (LCA) is performed for multiple microalgal biomass production pathways, consisting of a combination of cultivation and harvesting options. Results indicate that the EROIfossil for microalgae biomass vary from 0.38 to 1.08 with life cycle GHG emissions of -46.2 to 48.9 (g CO2 eq/MJ-biomass) and direct WDs of 20.8 to 38.8 (Liters/MJ-biomass) over the range of scenarios analyzed. Further anaylsis reveals that the EROIfossil for production pathways is relatively location invariant, and that algae's life cycle energy balance and GHG impacts are highly dependent on cultivation and harvesting parameters. Contrarily, algae's direct water demands were found to be highly sensitive to geographic location, and thus may be a constraining factor in sustainable algal-derived biofuel production. Additionally, scenarios with promising EROIfossil and GHG emissions profiles are plagued with high technological uncertainty. Given the high variability in microalgae's energy and environmental performance, careful evaluation of the algae-to-fuel supply chain is necessary to ensure the long-term sustainability of emerging algal biofuel systems. Alternative production scenarios and technologies may have the potential to reduce the critical demands of biomass production, and should be considered to make algae a viable and more efficient biofuel alternative.

  4. Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2012-01-01

    extension to the concept of IPDs discussed. Due to extended product responsibility, the concept of PSSs will offer new possibilities of planning and pre-defining life cycles of IPDs more precisely than for regular building components. Reducing or eliminating point-of-sales will induce producers to optimize...... on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...

  5. The importance of work or productive activity in life care planning and case management

    Science.gov (United States)

    Reid, Christine; Riddick-Grisham, Susan

    2015-01-01

    Abstract INTRODUCTION: The importance of work or productive activity for the well-being, community integration, and quality of life of people living with disabilities is addressed, with implications for life care planning and case management. BACKGROUND: The role of work or productive activity in our society, and consequences of deprivation if rehabilitation services do not address vocational effects of disabilities, is explored. A continuum of productivity options is introduced; types of vocational rehabilitation assessment processes and interventions are described. PURPOSE: The role of vocational rehabilitation services in life care planning and case management is discussed, focusing on quality of life for people living with disabilities. CONCLUSION: Rehabilitation and health care professionals should understand the importance of work or other productive activity, and support the development of appropriate plans to address those needs among people who have disabilities. PMID:26409330

  6. Metabotypes with properly functioning mitochondria and anti-inflammation predict extended productive life span in dairy cows

    Science.gov (United States)

    Huber, K.; Dänicke, S.; Rehage, J.; Sauerwein, H.; Otto, W.; Rolle-Kampczyk, U.; von Bergen, M.

    2016-01-01

    The failure to adapt metabolism to the homeorhetic demands of lactation is considered as a main factor in reducing the productive life span of dairy cows. The so far defined markers of production performance and metabolic health in dairy cows do not predict the length of productive life span satisfyingly. This study aimed to identify novel pathways and biomarkers related to productive life in dairy cows by means of (targeted) metabolomics. In a longitudinal study from 42 days before up to 100 days after parturition, we identified metabolites such as long-chain acylcarnitines and biogenic amines associated with extended productive life spans. These metabolites are mainly secreted by the liver and depend on the functionality of hepatic mitochondria. The concentrations of biogenic amines and some acylcarnitines differed already before the onset of lactation thus indicating their predictive potential for continuation or early ending of productive life. PMID:27089826

  7. Comparative Life Cycle Assessment of Lignocellulosic Ethanol Production: Biochemical Versus Thermochemical Conversion

    Science.gov (United States)

    Mu, Dongyan; Seager, Thomas; Rao, P. Suresh; Zhao, Fu

    2010-10-01

    Lignocellulosic biomass can be converted into ethanol through either biochemical or thermochemical conversion processes. Biochemical conversion involves hydrolysis and fermentation while thermochemical conversion involves gasification and catalytic synthesis. Even though these routes produce comparable amounts of ethanol and have similar energy efficiency at the plant level, little is known about their relative environmental performance from a life cycle perspective. Especially, the indirect impacts, i.e. emissions and resource consumption associated with the production of various process inputs, are largely neglected in previous studies. This article compiles material and energy flow data from process simulation models to develop life cycle inventory and compares the fossil fuel consumption, greenhouse gas emissions, and water consumption of both biomass-to-ethanol production processes. The results are presented in terms of contributions from feedstock, direct, indirect, and co-product credits for four representative biomass feedstocks i.e., wood chips, corn stover, waste paper, and wheat straw. To explore the potentials of the two conversion pathways, different technological scenarios are modeled, including current, 2012 and 2020 technology targets, as well as different production/co-production configurations. The modeling results suggest that biochemical conversion has slightly better performance on greenhouse gas emission and fossil fuel consumption, but that thermochemical conversion has significantly less direct, indirect, and life cycle water consumption. Also, if the thermochemical plant operates as a biorefinery with mixed alcohol co-products separated for chemicals, it has the potential to achieve better performance than biochemical pathway across all environmental impact categories considered due to higher co-product credits associated with chemicals being displaced. The results from this work serve as a starting point for developing full life cycle

  8. Designing life-time recycling loops for elastomer products

    NARCIS (Netherlands)

    Noordermeer, Jacques; Dierkes, Wilma; Blume, Anke; Dijkhuis, Kuno; van Hoek, Hans; Reuvekamp, Louis; Saiwari, Siti

    2017-01-01

    With depletion of natural resources and growing awareness of the limited capabilities of the globe to cope with pollution, the need to design life-time recycling loops for all types of products is steadily increasing. Rubber articles of all sorts and the need for a proper disposal of these at the

  9. Life Cycle Assessment of Sugar Production (VB)

    DEFF Research Database (Denmark)

    Teljigovic, Mehmed; Mengiardi, Jon; Factor, Gabriela

    1999-01-01

    The environmental organisation NOAH has proposed carrying out an environmental assessment of two different sugar productions (using sugar beet or sugar cane) in order to illustrate which of the systems has a higher environmental impact for sugar consumption in Denmark. Therefore a comparison...... will be made between sugar from sugar beet produced in Denmark versus sugar produces from sugar cane in a tropical country, Brazil, and transported afterwards to Denmark. To evaluate the environmental aspects of these two product systems a Life Cycle Assessement (LCA) will be carried out.From the results...... obtained in the present LCA of sugar produces from sugar canes or sugar beet it is difficult to make an immediate choice between the two possibilities. Indeed, Quantitative results from the EDIP (Environmental Design of Industrial Products) software are globally similar for both ways of producing sugar...

  10. LIFE CYCLE INVENTORY ANALYSIS IN THE PRODUCTION OF METALS USED IN PHOTOVOLTAICS.

    Energy Technology Data Exchange (ETDEWEB)

    FTHENAKIS,V.M.; KIM, H.C.; WANG, W.

    2007-03-30

    Material flows and emissions in all the stages of production of zinc, copper, aluminum, cadmium, indium, germanium, gallium, selenium, tellurium, and molybdenum were investigated. These metals are used selectively in the manufacture of solar cells, and emission and energy factors in their production are used in the Life Cycle Analysis (LCA) of photovoltaics. Significant changes have occurred in the production and associated emissions for these metals over the last 10 years, which are not described in the LCA databases. Furthermore, emission and energy factors for several of the by-products of the base metal production were lacking. This report aims in updating the life-cycle inventories associated with the production of the base metals (Zn, Cu, Al, Mo) and in defining the emission and energy allocations for the minor metals (Cd, In, Ge, Se, Te and Ga) used in photovoltaics.

  11. Shelf-life modeling of bakery products by using oxidation indices.

    Science.gov (United States)

    Calligaris, Sonia; Manzocco, Lara; Kravina, Giuditta; Nicoli, Maria Cristina

    2007-03-07

    The aim of this work was to develop a shelf-life prediction model of lipid-containing bakery products. To this purpose (i) the temperature dependence of the oxidation rate of bakery products was modeled, taking into account the changes in lipid physical state; (ii) the acceptance limits were assessed by sensory analysis; and (iii) the relationship between chemical oxidation index and acceptance limit was evaluated. Results highlight that the peroxide number, the changes of which are linearly related to consumer acceptability, is a representative index of the quality depletion of biscuits during their shelf life. In addition, the evolution of peroxides can be predicted by a modified Arrhenius equation accounting for the changes in the physical state of biscuit fat. Knowledge of the relationship between peroxides and sensory acceptability together with the temperature dependence of peroxide formation allows a mathematical model to be set up to simply and quickly calculate the shelf life of biscuits.

  12. A life cycle greenhouse gas inventory of a tree production system

    Science.gov (United States)

    Alissa Kendall; E. Gregory McPherson

    2012-01-01

    PurposeThis study provides a detailed, process-based life cycle greenhouse gas (GHG) inventory of an ornamental tree production system for urban forestry. The success of large-scale tree planting initiatives for climate protection depends on projects being net sinks for CO2 over their entire life cycle....

  13. ‘Publish or perish’: Family life and academic research productivity

    Directory of Open Access Journals (Sweden)

    Chris W. Callaghan

    2016-05-01

    Full Text Available Research purpose: The influence of work-to-family and family-to-work spillovers is well documented in the human resources literature. However, little is known of the relationships between the pressures faced by academics to publish and the potential family life consequences of being a highly productive academic. Research design, approach and method: This research sought to investigate these relationships within the context of a large South African university by testing associations between family life variables such as marriage and dependent children against measures of the following specific types of research publication: (1 South African Department of Higher Education and Training–accredited journal publications; (2 Thompson Reuters Institute for Scientific Information (ISI and ProQuest’s International Bibliography of the Social Sciences (IBSS– indexed journal article publications; (3 conference proceedings publications; (4 conference paper presentations; (5 book chapter publications; (6 book publications; and (7 gross research productivity, reflecting a volume or quantity measure of research publication. Main findings: ISI and/or IBSS journal article publication is found to be negatively associated with dependent children, but only for male academics, and to be negatively associated with female gender over and above the effect of family life variables in testing. Practical/managerial implications: Human resources managers in universities need to be cognisant of the specific pressures faced by staff that are required to produce ever more research publications, in order to help them achieve work–life balance. Contribution: In a global context of increasing pressures for research publication, and for higher and higher numbers of publications, it is necessary to identify the potential costs involved for high-volume–producing academics, particularly in terms of family versus work. Keywords: research productivity; family-work life balance

  14. Mobility, productivity, gender and career development of Argentinean life scientists

    OpenAIRE

    Koen Jonkers

    2011-01-01

    In this study we use survival or event history analysis to explore the effect of international mobility, gender and productivity on career development of researchers in CONICET life science research institutes in Buenos Aires. We find support for our hypothesis that various productivity measures can explain the likelihood of promotion. Given the same level of productivity, female researchers tend to take longer to being promoted. Unconditionally international work experience has a positive ef...

  15. YAOPBM-II: extension to higher degrees and to shorter time series

    Energy Technology Data Exchange (ETDEWEB)

    Korzennik, S G [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (United States)], E-mail: skorzennik@cfa.harvard.edu

    2008-10-15

    In 2005, I presented a new fitting methodology (Yet AnOther Peak Bagging Method -YAOPBM), derived for very-long time series (2088-day-long) and applied it to low degree modes, {iota} {<=} 25. That very-long time series was also sub-divided into shorter segments (728-day-long) that were each fitted over the same range of degrees, to estimate changes with solar activity levels. I present here the extension of this method in several 'directions': a) to substantially higher degrees ({iota} {<=} 125); b) to shorter time series (364- and 182-day-long); and c) to additional 728-day-long segments, covering now some 10 years of observations. I discuss issues with the fitting, namely the leakage matrix, and the f- and p1 mode at very low frequencies, and I present some of the characteristics of the observed temporal changes.

  16. Product Life Cycle: Moving from Theory to Practice

    Directory of Open Access Journals (Sweden)

    Stanley Buchin

    2015-02-01

    Full Text Available Restaurant, bar, and hospitality trends are rapidly changing, and businesses must be more proactive than ever before to continuously stimulate business and prepare for a products natural life cycle. This article will explore a model of predicting PLC and strategic practices that can extend the mature phase of a restaurant or bar.

  17. The ecological half-life of 137Cs in undisturbed silt soil

    International Nuclear Information System (INIS)

    Drosg, M.

    2012-01-01

    The time necessary to safely cultivate agricultural areas after they have been contaminated by radioactivity (e.g. after the Chernobyl accident) is not determined by the physical half-life of the radioactive isotopes in question but by their (usually much shorter) ecological half-life (). This half-life not only depends on the type of soil but also on whether the soil was fertilized or not. Therefore it is not possible to determine an ecological half-life that is universally valid. However, the value for undisturbed, unfertilized soil should provide a general indication for the duration of ecological half-life. In a silt soil in Vienna, Austria, the ecological half-life of 137 Cs was determined to be 0.8 years, which is much shorter than the physical half-life of 30 years. - Highlights: ► Absolute measurements of 137 Cs radioactivity in leaves of perennial plants. ► The natural 40 K radioactivity served as reference. ► The ecological half-life of 137 Cs in loamy soil was determined.

  18. Modified Atmosphere Systems and Shelf Life Extension of Fish and Fishery Products

    Science.gov (United States)

    DeWitt, Christina A. Mireles; Oliveira, Alexandra C.M.

    2016-01-01

    This review aims at summarizing the findings of studies published over the past 15 years on the application of modified atmosphere (MA) systems for shelf life extension of fish and fishery products. This review highlights the importance of CO2 in the preservation of seafood products, and underscores the benefits of combining MA technology with product storage in the superchilled temperature range. It is generally accepted that MA technology cannot improve product quality and should not be utilized as a substitute for good sanitation and strict temperature control. Benefits derived from application of MA, however, can significantly impact preservation of product quality and it subsequent shelf-life. For this reason, this review is the first of its kind to propose detailed handling and quality guidelines for fresh fish to realize the maximum benefit of MA technology. PMID:28231143

  19. Transitions in waste treatment as a driver for product life extension

    DEFF Research Database (Denmark)

    Lauridsen, Erik Hagelskjær; Jørgensen, Michael Søgaard

    2015-01-01

    that emphasise prolonged product life and stresses the importance of avoiding down cycling of products and material streams. The destabilisation of the old incineration regime thus opens up for new opportunities with both new policies and potentially new social practices. This paper describes a number...

  20. Life-Cycle Assessment of Pyrolysis Bio-Oil Production*

    Energy Technology Data Exchange (ETDEWEB)

    Steele, Philip; Puettmann, Maureen E.; Penmetsa, Venkata Kanthi; Cooper, Jerome E.

    2012-07-01

    As part ofthe Consortium for Research on Renewable Industrial Materials' Phase I life-cycle assessments ofbiofuels, lifecycle inventory burdens from the production of bio-oil were developed and compared with measures for residual fuel oil. Bio-oil feedstock was produced using whole southern pine (Pinus taeda) trees, chipped, and converted into bio-oil by fast pyrolysis. Input parameters and mass and energy balances were derived with Aspen. Mass and energy balances were input to SimaPro to determine the environmental performance of bio-oil compared with residual fuel oil as a heating fuel. Equivalent functional units of 1 MJ were used for demonstrating environmental preference in impact categories, such as fossil fuel use and global warming potential. Results showed near carbon neutrality of the bio-oil. Substituting bio-oil for residual fuel oil, based on the relative carbon emissions of the two fuels, estimated a reduction in CO2 emissions by 0.075 kg CO2 per MJ of fuel combustion or a 70 percent reduction in emission over residual fuel oil. The bio-oil production life-cycle stage consumed 92 percent of the total cradle-to-grave energy requirements, while feedstock collection, preparation, and transportation consumed 4 percent each. This model provides a framework to better understand the major factors affecting greenhouse gas emissions related to bio-oil production and conversion to boiler fuel during fast pyrolysis.

  1. Life Cycle Assessment for the Production of Oil Palm Seeds.

    Science.gov (United States)

    Muhamad, Halimah; Ai, Tan Yew; Khairuddin, Nik Sasha Khatrina; Amiruddin, Mohd Din; May, Choo Yuen

    2014-12-01

    The oil palm seed production unit that generates germinated oil palm seeds is the first link in the palm oil supply chain, followed by the nursery to produce seedling, the plantation to produce fresh fruit bunches (FFB), the mill to produce crude palm oil (CPO) and palm kernel, the kernel crushers to produce crude palm kernel oil (CPKO), the refinery to produce refined palm oil (RPO) and finally the palm biodiesel plant to produce palm biodiesel. This assessment aims to investigate the life cycle assessment (LCA) of germinated oil palm seeds and the use of LCA to identify the stage/s in the production of germinated oil palm seeds that could contribute to the environmental load. The method for the life cycle impact assessment (LCIA) is modelled using SimaPro version 7, (System for Integrated environMental Assessment of PROducts), an internationally established tool used by LCA practitioners. This software contains European and US databases on a number of materials in addition to a variety of European- and US-developed impact assessment methodologies. LCA was successfully conducted for five seed production units and it was found that the environmental impact for the production of germinated oil palm was not significant. The characterised results of the LCIA for the production of 1000 germinated oil palm seeds showed that fossil fuel was the major impact category followed by respiratory inorganics and climate change.

  2. The challenge of product development and tariff migration; Herausforderung Produktentwicklung und Tarifmigration

    Energy Technology Data Exchange (ETDEWEB)

    Haller, Thomas [Simon-Kucher und Partners, Strategy und Marketing Consults, Wien (Austria); Stiller, Michael [Simon-Kucher und Partners, Bonn (Germany); Cerna, Daniela [Simon-Kucher und Partners, Frankfurt am Main (Germany)

    2011-01-15

    Power supply companies in German-speaking countries expect a marked shortening of product life cycles over the next five years. This means that new products will need to be developed at ever shorter time intervals. However, opinions on the success of newly introduced products are mediocre. While there is an understanding that the product portfolio should meet customers' needs, the importance of the conceptualisation phase in developing suitable products is systematically underestimated. A study performed by a reputed strategic consultancy firm has shown that at least when it comes to tariff migration there is a failure to address customers in a differentiated manner. A rethink in conceptualising product portfolios is needed if the success of new product launches is to be driven by other criteria than merely the price.

  3. Life-Cycle Inventory Analysis of I-joist Production in the United States

    Science.gov (United States)

    Richard D. Bergman

    2015-01-01

    Documenting the environmental performance of building products is becoming increasingly common. Creating environmental product declarations (EPDs) based on life-cycle assessment (LCA) data is one approach to provide scientific documentation of the products’ environmental performance. Many U.S. structural wood products have LCA-based “eco-labels” developed under the ISO...

  4. Life Cycle Assessment and Water Footprint of Hydrogen Production Methods: From Conventional to Emerging Technologies

    Directory of Open Access Journals (Sweden)

    Andi Mehmeti

    2018-02-01

    Full Text Available A common sustainability issue, arising in production systems, is the efficient use of resources for providing goods or services. With the increased interest in a hydrogen (H2 economy, the life-cycle environmental performance of H2 production has special significance for assisting in identifying opportunities to improve environmental performance and to guide challenging decisions and select between technology paths. Life cycle impact assessment methods are rapidly evolving to analyze multiple environmental impacts of the production of products or processes. This study marks the first step in developing process-based streamlined life cycle analysis (LCA of several H2 production pathways combining life cycle impacts at the midpoint (17 problem-oriented and endpoint (3 damage-oriented levels using the state-of-the-art impact assessment method ReCiPe 2016. Steam reforming of natural gas, coal gasification, water electrolysis via proton exchange membrane fuel cell (PEM, solid oxide electrolyzer cell (SOEC, biomass gasification and reforming, and dark fermentation of lignocellulosic biomass were analyzed. An innovative aspect is developed in this study is an analysis of water consumption associated with H2 production pathways by life-cycle stage to provide a better understanding of the life cycle water-related impacts on human health and natural environment. For water-related scope, Water scarcity footprint (WSF quantified using Available WAter REmaining (AWARE method was applied as a stand-alone indicator. The paper discusses the strengths and weaknesses of each production pathway, identify the drivers of environmental impact, quantify midpoint environmental impact and its influence on the endpoint environmental performance. The findings of this study could serve as a useful theoretical reference and practical basis to decision-makers of potential environmental impacts of H2 production systems.

  5. Deterioration and shelf-life extension of fish and fishery products by modified atmosphere packaging

    Directory of Open Access Journals (Sweden)

    Payap Masniyom

    2011-04-01

    Full Text Available Fish and fishery products have been recognized as a nutrition source due to their high protein content. Moreover, theycontain considerable amount of unsaturated fatty acids, especially omega-3 fatty acids, which are regarded as preventivecompounds. However, shelf-life of seafood is limited by biochemical and microbiological changes. Modified atmospherepackaging (MAP is widely used for minimally processed fishery products including fresh meat for retarding microbial growthand enzymatic spoilage. CO2, O2, and N2 are most often used in MAP. CO2 enriched atmosphere inhibits the autolyticdegradation of fish muscle during storage. However, high levels of CO2 negatively affect product quality, especially by increasingdrip loss and altering texture. Development of satisfactory methods for shelf-life extension that ensure qualitymaintenance of products with minimum loss has drawn the attention of food technologists. The application of MAP andcombination process in seafood is a promising preservation method to extend the shelf-life of fish and fishery products.

  6. End-of-life resource recovery from emerging electronic products

    DEFF Research Database (Denmark)

    Parajuly, Keshav; Habib, Komal; Cimpan, Ciprian

    2016-01-01

    Integrating product design with appropriate end-of-life (EoL) processing is widely recognized to have huge potentials in improving resource recovery from electronic products. In this study, we investigate both the product characteristics and EoL processing of robotic vacuum cleaner (RVC), as a case...... of emerging electronic product, in order to understand the recovery fate of different materials and its linkage to product design. Ten different brands of RVC were dismantled and their material composition and design profiles were studied. Another 125 RVCs (349 kg) were used for an experimental trial...... at a conventional ‘shred-and-separate’ type preprocessing plant in Denmark. A detailed material flow analysis was performed throughout the recycling chain. The results show a mismatch between product design and EoL processing, and the lack of practical implementation of ‘Design for EoL’ thinking. In the best...

  7. Break free from the product life cycle.

    Science.gov (United States)

    Moon, Youngme

    2005-05-01

    Most firms build their marketing strategies around the concept of the product life cycle--the idea that after introduction, products inevitably follow a course of growth, maturity, and decline. It doesn't have to be that way, says HBS marketing professor Youngme Moon. By positioning their products in unexpected ways, companies can change how customers mentally categorize them. In doing so, they can shift products lodged in the maturity phase back--and catapult new products forward--into the growth phase. The author describes three positioning strategies that marketers use to shift consumers' thinking. Reverse positioning strips away"sacred" product attributes while adding new ones (JetBlue, for example, withheld the expected first-class seating and in-flight meals on its planes while offering surprising perks like leather seats and extra legroom). Breakaway positioning associates the product with a radically different category (Swatch chose not to associate itself with fine jewelry and instead entered the fashion accessory category). And stealth positioning acclimates leery consumers to a new offering by cloaking the product's true nature (Sony positioned its less-than-perfect household robot as a quirky pet). Clayton Christensen described how new, simple technologies can upend a market. In an analogous way, these positioning strategies can exploit the vulnerability of established categories to new positioning. A company can use these techniques to go on the offensive and transform a category by demolishing its traditional boundaries. Companies that disrupt a category through positioning create a lucrative place to ply their wares--and can leave category incumbents scrambling.

  8. Product Life Cycle concept use and application by marketing decision-makers in small South African organisations

    Directory of Open Access Journals (Sweden)

    F. J. Herbst

    2003-12-01

    Full Text Available The purpose of the study was to test the underlying theory of the product life cycle concept with the primary objective of establishing what the use and practical value of the product life cycle concept is in making marketing decisions in small manufacturing and dealer organisations in Gauteng. The main focus was to test the ability of marketing decision-makers in these small organisations to associate their application and use of the product life cycle concept with Kotler's assumptions on marketing characteristics, described marketing objectives and proposed marketing strategies. A major finding was that small organisations tended to display a marketing knowledge level with the existing marketing theory. Another important conclusion of the study was that the current product life cycle concept theory needs to be broadened to include strategies on the expanded marketing mix. Apart from the different use and application by marketing decision-makers in small organisations in South Africa the product life cycle concept theory has potential as a strategic tool and a high likelihood for its future use as a marketing decision-making instrument.

  9. Life cycle assessment of agricultural biogas production systems

    Energy Technology Data Exchange (ETDEWEB)

    Lansche, J.; Muller, J. [Hohenheim Univ., Stuttgart (Germany). Inst. of Agricultural Engineering, Tropical and Subtropical Group

    2010-07-01

    Agricultural activities are large contributors to anthropogenic greenhouse gas emissions. This paper discussed the effectiveness of reducing agricultural emissions by using liquid manure to produce biogas. When using this technique, greenhouse gas emissions from manure storage are avoided and renewable energy is generated as heat and electricity in combined heat and power plants. The purpose of this study was to evaluate the environmental impacts of biogas production systems based on the methods of life cycle assessment. The traditional use of agricultural manures was compared with conventional energy production. The Gabi 4.3 software was used to create a model to evaluate the biogas production systems according to their environmental impact. In addition to the global warming potential, other impact categories were also used to evaluate the effects of the systems in eutrophication and acidification. It was concluded that environmental benefits can be obtained in terms of greenhouse gas emissions compared to electricity production from biogas with the typical German marginal electricity mix.

  10. Sex differences in life span: Females homozygous for the X chromosome do not suffer the shorter life span predicted by the unguarded X hypothesis.

    Science.gov (United States)

    Brengdahl, Martin; Kimber, Christopher M; Maguire-Baxter, Jack; Friberg, Urban

    2018-03-01

    Life span differs between the sexes in many species. Three hypotheses to explain this interesting pattern have been proposed, involving different drivers: sexual selection, asymmetrical inheritance of cytoplasmic genomes, and hemizygosity of the X(Z) chromosome (the unguarded X hypothesis). Of these, the unguarded X has received the least experimental attention. This hypothesis suggests that the heterogametic sex suffers a shortened life span because recessive deleterious alleles on its single X(Z) chromosome are expressed unconditionally. In Drosophila melanogaster, the X chromosome is unusually large (∼20% of the genome), providing a powerful model for evaluating theories involving the X. Here, we test the unguarded X hypothesis by forcing D. melanogaster females from a laboratory population to express recessive X-linked alleles to the same degree as males, using females exclusively made homozygous for the X chromosome. We find no evidence for reduced life span or egg-to-adult viability due to X homozygozity. In contrast, males and females homozygous for an autosome both suffer similar, significant reductions in those traits. The logic of the unguarded X hypothesis is indisputable, but our results suggest that the degree to which recessive deleterious X-linked alleles depress performance in the heterogametic sex appears too small to explain general sex differences in life span. © 2018 The Author(s). Evolution © 2018 The Society for the Study of Evolution.

  11. Multi-board concept - a scenario based approach for supporting product quality and life cycle oriented design

    DEFF Research Database (Denmark)

    Robotham, Antony John; Hertzum, Morten

    2000-01-01

    This paper will describe the multi-board concept, which is a working approach for supporting life cycle oriented design and product quality. Aspects of this concept include construction of a common working environment where multiple display boards depict scenarios of the product life cycle...... to believe that the multi-board concept promises to be a useful means of communication amongst the design team. We be-lieve that it fosters a thorough understanding of life cycle events, which, in turn, inspires the design of innovative products of the highest quality......., creating a shared quality mindset amongst design-ers, and developing creativity and synthesis in product design. The appropriateness of scenarios for supporting life cycle oriented design will be ar-gued and preliminary results from early experi-mentation will be presented.Initial results lead us...

  12. Life's Impact on the Soil Production Function

    Science.gov (United States)

    Harrison, Emma; Willenbring, Jane; Brocard, Gilles

    2016-04-01

    Soil melds life and lithology, but the top-down production of soil by the incorporation of organic matter has typically been viewed through a lens of soil biogeochemistry and the bottom-up weathering of bedrock viewed from a geomorphologic perspective. We merge these perspectives by developing a variation on the classic geomorphological soil production function [1] that accounts for the influence of top-down soil production by additions of organic material. In the classic view [1], production rate of soil from bedrock weathering is a function of the thickness of the soil horizon. Under steady state conditions, this thickness is controlled by a constant coefficient of diffusion and by the hillslope curvature. Across the globe, equilibrium landscapes can be hard to find. We explore the many ways that biota influence the upper soil horizons and move the soil-hillslope system out of steady state using measurements of in situ 10Be at depth in soil profiles. Our empirical case study is in the Luquillo Critical Zone Observatory of northeastern Puerto Rico, where long term ecological monitoring suggests an average of 375 m My-1 of litter fall [2] and as much as 17.5 m My-1 of dust [3] is contributed to the forest floor. This substantial volume of material forms an active surficial layer, functionally increasing the residence time of grains deeper in the soil profile. Litter recycling influences the cosmogenic dose rate to be higher by increasing the residence time of grains and to be lower by increasing environmental shielding. In unconstrained systems, probabilistic modeling can determine a range of solutions for the ages of grains determined with 10Be depth profiles[4]. We compare the probabilistic outcomes to actual measurements of the in situ 10Be at depth in soil profiles from the Luquillo Mountains. Life living in the soil, rather than on it, is of equal importance in the Luquillo Mountains. On average, the soil is occupied by 200 individual earthworms per m2 [5

  13. Combination of potassium sorbate and irradiation treatments to extend the shelf-life cured fish products

    International Nuclear Information System (INIS)

    Maha, M.; Sudarman, H.; Chosdu, R.; Siagian, E.G.; Nasran, S.

    1981-01-01

    Studies on shelf-life extension of three kinds of cured fish product, i.e. salted chub mackerel (Rastrelliger neglectus), boiled chub mackerel (Rastrelliger neglectus) and smoked milkfish (Chanos chanos) have been done using a combined potassium sorbate and irradiation treatment. An integrated process for the preparation of each cured product provided with the combined treatment is described. Total bacterial count, total volatile base nitrogen, content of volatile reducing substances and mould growth were used as objective indices of quality in comparison with sensory evaluation to determine the shelf-life of the products held at ambient conditions. It was found that potassium sorbate residue of 0.1% level followed by irradiation up to 4 kGy could retard mould growth on the products and extend the shelf-life considerably in comparison with the commercially prepared products. (author)

  14. Determinants of life expectancy in eastern mediterranean region: a health production function.

    Science.gov (United States)

    Bayati, Mohsen; Akbarian, Reza; Kavosi, Zahra

    2013-06-01

    Determinants of health or health production function in health economics literature constitute noticeable issues in health promotion. This study aimed at estimating a health production function for East Mediterranean Region (EMR) based on the Grossman theoretical model. This ecological study was performed using the econometric methods. The panel data model was used in order to determine the relationship between life expectancy and socioeconomic factors. The data for 21 EMR countries between 1995 and 2007 were used. Fixed-effect-model was employed to estimate the parameters based on Hausman test. In estimating the health production function, factors such as income per capita (β=0.05, Pdeterminants of health status, proxied by life expectancy at birth. A notable result was the elasticity of life expectancy with respect to the employment rate and its significance level was different between males (β=0.13, P0.001). In order to improve the health status in EMR countries, health policymakers should focus on the factors which lie outside the healthcare system. These factors are mainly associated with economic growth and development level. Thus, the economic stabilisation policies with the aim of increasing the productivity, economic growth, and reducing unemployment play significant roles in the health status of the people of the region.

  15. Application of Pharmacokinetics and Pharmacodynamics in Product Life Cycle Management. A Case Study with a Carbidopa-Levodopa Extended-Release Formulation.

    Science.gov (United States)

    Modi, Nishit B

    2017-05-01

    Increasing costs in discovering and developing new molecular entities and the continuing debate on limited company pipelines mean that pharmaceutical companies are under significant pressure to maximize the value of approved products. Life cycle management in the context of drug development comprises activities to maximize the effective life of a product. Life cycle approaches can involve new formulations, new routes of delivery, new indications or expansion of the population for whom the product is indicated, or development of combination products. Life cycle management may provide an opportunity to improve upon the current product through enhanced efficacy or reduced side effects and could expand the therapeutic market for the product. Successful life cycle management may include the potential for superior efficacy, improved tolerability, or a better prescriber or patient acceptance. Unlike generic products where bioequivalence to an innovator product may be sufficient for drug approval, life cycle management typically requires a series of studies to characterize the value of the product. This review summarizes key considerations in identifying product candidates that may be suitable for life cycle management and discusses the application of pharmacokinetics and pharmacodynamics in developing new products using a life cycle management approach. Examples and a case study to illustrate how pharmacokinetics and pharmacodynamics contributed to the selection of dosing regimens, demonstration of an improved therapeutic effect, or regulatory approval of an improved product label are presented.

  16. Applying unit process life cycle inventor (UPLCI) methodology in product/packaging combinatons

    NARCIS (Netherlands)

    Oude Luttikhuis, Ellen; Toxopeus, Marten E.; Overcash, M.; Nee, Andrew Y.C.; Song, Bin; Ong, Soh-Khim

    2013-01-01

    This paper discusses how the UPLCI approach can be used for determining the inventory of the manufacturing phases of product/packaging combinations. The UPLCI approach can make the inventory of the manufacturing process of the product that is investigated more accurate. The life cycle of

  17. The Meaning of Life-long Education for Contemporal' Industrial Production

    Directory of Open Access Journals (Sweden)

    Janez Tušek

    2001-12-01

    Full Text Available The article shows the significance of and the need for permanent education of the people employed in industry who want to update production, implement novelties, monitor competition, and constantly increase productivity. Besides general needs and principles of life-long education there are some basic and general needs of education for modern industrial production. There is a special emphasis on education for overall quality, the significance of standardisation, protection of the environment, job satisfaction, safety at work, and dealing with customers. One chapter is dedicated to training for development and improvement of products, patent protection of new products, learning from competition, use of internet and other sources. At the end there are some cases of successful education in Slovenian industry.

  18. 76 FR 34271 - Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including...

    Science.gov (United States)

    2011-06-13

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,671] Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including Teleworkers Reporting to... Supply Chain, Global Product Life Cycles Management Unit, including teleworkers reporting to Houston...

  19. Productivity at work and quality of life in patients with rheumatoid arthritis

    NARCIS (Netherlands)

    van Vilsteren, Myrthe; Boot, Cecile R. L.; Knol, Dirk L.; van Schaardenburg, Dirkjan; Voskuyl, Alexandre E.; Steenbeek, Romy; Anema, Johannes R.

    2015-01-01

    The aim of this study was to determine which combination of personal, disease-related and environmental factors is best associated with at-work productivity loss in patients with rheumatoid arthritis (RA), and to determine whether at-work productivity loss is associated with the quality of life for

  20. Product Life Cycle of the Manufactured Home Industry

    Directory of Open Access Journals (Sweden)

    Gavin Wherry

    2014-09-01

    Full Text Available Residential construction consumes an estimated 26 percent of the total U.S. wood harvest and thus plays an important role in the forest products value chain. While being a relatively small part of the U.S. residential construction market, the factory-built residential housing industry, originating from manufactured homes (e.g. mobile homes, is embracing emerging industry segments such as modular or panelized homes. Since indications exist that factory-built home production is slated to gain a more prominent role in the U.S. construction markets at the cost of traditional stick-built production, the factory-built home industry sub-segment is of considerable importance to the forest products industry. This research looks at manufactured home producers as a benchmark for analyzing the current economic state of the industry and discusses competitive strategies. The analysis concludes, through macroeconomic modeling, that manufactured homes are in the declining stage of their product life cycle due to changes to the U.S. residential construction sector and the factory-built home industry and by advancements of rival industry-segments. As market share continues to decline, firms operating in this industry-segment seek to either hedge their losses through product diversification strategies or remain focused on strategically repositioning the manufactured home segment.

  1. Life cycle assessment of hydrogen production and fuel cell systems

    International Nuclear Information System (INIS)

    Dincer, I.

    2007-01-01

    This paper details life cycle assessment (LCA) of hydrogen production and fuel cell system. LCA is a key tool in hydrogen and fuel cell technologies for design, analysis, development; manufacture, applications etc. Energy efficiencies and greenhouse gases and air pollution emissions have been evaluated in all process steps including crude oil and natural gas pipeline transportation, crude oil distillation, natural gas reprocessing, wind and solar electricity generation , hydrogen production through water electrolysis and gasoline and hydrogen distribution and utilization

  2. Life Cycle Price Trends and Product Replacement: Implications for the Measurement of Inflation

    OpenAIRE

    Daniel Melser; Iqbal A. Syed

    2014-01-01

    The paper explores the extent to which products follow systematic pricing patterns over their life cycle and the impact this has on the measurement of inflation. Using a large US scanner data set on supermarket products and applying flexible regression methods, we find that on average prices decline as items age. This life cycle price change is often attributed to quality difference in the construction of CPI as items are replaced due to disappearance or during sample rotations. This introduces a...

  3. Determination of Shelf Life for Butter and Cheese Products in Actual and Accelerated Conditions.

    Science.gov (United States)

    Park, Jung-Min; Shin, Jin-Ho; Bak, Da-Jeong; Kim, Na-Kyeong; Lim, Kwang-Sei; Yang, Cheul-Young; Kim, Jin-Man

    2014-01-01

    The aim of this study was to estimate the shelf life of butter and cheese products, with shelf life being a guide used to determine the storage period of food before deterioration. Butter and cheese samples stored at 10℃ and 15℃ had a shelf life of 221 d, while those stored at 25℃ and 35℃ had a shelf life of 109 d. Quality changes, including total cell count, coliform counts, Listeria monocytogenes counts, acid value, moisture content, pH, acidity and overall sensory evaluation, were monitored. In order to pass the overall sensory evaluation, a quality score of 5 points on a 9-point scale was required. For other quality criteria, legal quality limits were established based on the "Process Criteria and Ingredient Standard of Livestock Products" by the Animal, Plant and Fisheries Quarantine and Inspection Agency (Republic of Korea). The nonlegal quality limit was estimated by regression analysis between non-quality criteria (y) and overall sensory evaluation (x). The shelf life was estimated based on the number of days that the product passed the quality limit of the quality criteria. The shelf life of samples stored at 10℃, 15℃, 25℃ and 35℃ was 21.94, 17.18, 6.10 and 0.58 mon, respectively, for butter and 10.81, 9.47, 4.64 and 0.20 mon, respectively, for cheese.

  4. Qualitative Characteristics and Determining Shelf-Life of Milk Beverage Product Supplemented with Coffee Extracts.

    Science.gov (United States)

    Yoon, Ji-Woo; Ahn, Sung-Il; Kim, Ha-Na; Park, Jun-Hong; Park, Sun-Young; Kim, Jae-Hoon; Oh, Duk-Geun; Jhoo, Jin-Woo; Kim, Gur-Yoo

    2017-01-01

    This study was conducted to establish the shelf-life of a milk beverage product supplemented with coffee extracts. Qualitative changes including peroxide value (PV), microorganism content, caffeine content, and sensory evaluation were measured periodically in beverages kept at 10, 20, and 30°C for 8 wk. Lipid oxidation of the product was measured by peroxide value analysis, and apparent changes were observed during a 4 wk storage period. Caffeine analysis revealed that the changes in caffeine content were negligible during the storage period. Total aerobic bacteria, Escherichia coli , yeast, and mold were not detected in the products during an 8 wk storage period. Sensory evaluation revealed that after 4 wk of storage overall acceptance was less than 3 points on a 5-point scale. In this study, PV was used as an indicator of the shelf-life of the milk beverage product. PV analysis revealed that a value of 20 meq/kg was the end of the shelf-life using the Arrhenius equation and the accelerated shelf-life test (ASLT). Assuming that the beverages are kept at 4°C during distribution, calculation of when the PV reached the quality limit point (20 meq/kg) was done with the equation ln(PV) = 0.3644X - 2.21834 and, using that equation, PV = e 0.3644X-2.21834 was calculated. Therefore, 14.3086 wk was determined to be the shelf-life of the milk beverage supplemented with coffee when stored at 4°C.

  5. A Life-Cycle Assessment of Biofuels: Tracing Energy and Carbon through a Fuel-Production System

    Science.gov (United States)

    Krauskopf, Sara

    2010-01-01

    A life-cycle assessment (LCA) is a tool used by engineers to make measurements of net energy, greenhouse gas production, water consumption, and other items of concern. This article describes an activity designed to walk students through the qualitative part of an LCA. It asks them to consider the life-cycle costs of ethanol production, in terms of…

  6. Carbon dioxide emission in hydrogen production technology from coke oven gas with life cycle approach

    Directory of Open Access Journals (Sweden)

    Burmistrz Piotr

    2016-01-01

    Full Text Available The analysis of Carbon Footprint (CF for technology of hydrogen production from cleaned coke oven gas was performed. On the basis of real data and simulation calculations of the production process of hydrogen from coke gas, emission indicators of carbon dioxide (CF were calculated. These indicators are associated with net production of electricity and thermal energy and direct emission of carbon dioxide throughout a whole product life cycle. Product life cycle includes: coal extraction and its transportation to a coking plant, the process of coking coal, purification and reforming of coke oven gas, carbon capture and storage. The values were related to 1 Mg of coking blend and to 1 Mg of the hydrogen produced. The calculation is based on the configuration of hydrogen production from coke oven gas for coking technology available on a commercial scale that uses a technology of coke dry quenching (CDQ. The calculations were made using ChemCAD v.6.0.2 simulator for a steady state of technological process. The analysis of carbon footprint was conducted in accordance with the Life Cycle Assessment (LCA.

  7. Distance saturation product predicts health-related quality of life among sarcoidosis patients.

    Science.gov (United States)

    Bourbonnais, Julie M; Malaisamy, Subramanian; Dalal, Bhavinkumar D; Samarakoon, Priyan C; Parikh, Swapna R; Samavati, Lobelia

    2012-06-13

    Sarcoidosis is a chronic disease with different phenotypic manifestations. Health-related quality of life is an important aspect in sarcoidosis, yet difficult to measure. The objective of this study was to identify clinical markers predictive of poor quality of life in sarcoidosis patients that can be followed over time and targeted for intervention. We assessed the quality of life of 162 patients with confirmed sarcoidosis in a prospective, cross-sectional study using the Sarcoidosis Health Questionnaire (SHQ) and Short Form-36 Health Survey (SF-36). We evaluated the validity of these questionnaires and sought to identify variables that would best explain the performance scores of the patients. On multivariate regression analyses, the very best composite model to predict total scores from both surveys was a model containing the distance-saturation product and Borg Dyspnea Scale score at the end of a 6-min walk test. This model could better predict SF-36 scores (R² = 0.33) than SHQ scores (R² = 0.24). Substitution of distanced walked in 6 min for the distance-saturation product in this model resulted in a lesser ability to predict both scores (R² = 0.26 for SF-36; R² = 0.22 for SHQ). Both the SHQ and SF-36 surveys are valuable tools in the assessment of health-related quality of life in sarcoidosis patients. The best model to predict quality of life among these patients, as determined by regression analyses, included the distance-saturation product and Borg score after the 6-min walk test. Both variables represent easily obtainable clinical parameters that can be followed over time and targeted for intervention.

  8. Implications of shorter cells in PEP

    International Nuclear Information System (INIS)

    Wiedemann, H.

    1975-01-01

    Further studies on the beam-stay-clear requirements in PEP led to the conclusion that the vertical aperture needed to be enlarged. There are two main reasons for that: Observations at SPEAR indicate that the aperture should be large enough for a fully coupled beam. Full coupling of the horizontal and vertical betatron oscillations occurs not only occasionally when the energy, tune or betatron function at the interaction point is changed but also due to the beam/endash/beam effect of two strong colliding beams. The second reason for an increased aperture requirement is the nonlinear perturbation of the particle trajectories by the sextupoles. This perturbation increases a fully coupled beam by another 50% to 80%. Both effects together with a +-5 mm allowance for closed orbit perturbation result in a vertical beam-stay-clear in the bending magnets of +-4.8 to +-5.6 cm, compared to the present +-2.0 cm. This beam-stay-clear, together with additional space for vacuum chamber, etc., leads to very costly bending magnets. In this note, a shorter cell length is proposed which would reduce considerably the vertical beam-stay-clear requirements in the bending magnets. 7 figs

  9. SEMEN PRODUCTION AND PRODUCTIVE LIFE OF SAHIWAL BULLS: RELATIONSHIP WITH GENETIC WORTH

    Directory of Open Access Journals (Sweden)

    M. S. KHAN, A. A. BHATTI, S. A. BHATTI1 AND M. ASHIQ2

    2007-01-01

    Full Text Available Objective of the present study was to document the semen producing ability, productive life and genetic ability for lactation milk yield of Sahiwal bulls used for artificial insemination (AI in Punjab and to find the impact of AI bulls on the improvement of Sahiwal cattle. Data from Semen Production Unit (SPU, Qadirabad, Sahiwal, Pakistan were used for this purpose. A repeatability animal model was used for estimation of breeding values for lactation milk yield. Productive life of a bull was calculated as a difference between culling age and the age at first ejaculation. Number of bulls brought to SPU varied from 9 to 102 for any year. Average number of doses of semen produced by any bull for a year varied from 724 to 5745. On the average, 238 bulls produced 17143 ± 1164 semen doses during their average stay of 5.4 ± 0.2 years. About 50% of the bulls stayed for less than four years at the SPU; with a maximum range of 14 years. Progeny tested bulls (n=90 produced 5000 and 10000 semen doses (Y in three and four years of stay (X, respectively (Y = 24.8 + 2.3635 X - 0.0112 X2. To produce 20,000 doses, it is predicted that bulls need to stay for six and a half years at the SPU. There was no association between breeding values for lactation milk yield estimated under a repeatability animal model (EBVs and number of semen doses produced (r = 0.17 and EBVs and number of daughters. Lack of genetic superiority of bulls used indicated that AI did not bring desired genetic improvement in Sahiwal cattle in the present situation. Modifications for judicious utilization of bulls are suggested along with improvements in data recording.

  10. Activities, productivity, and compensation of men and women in the life sciences.

    Science.gov (United States)

    DesRoches, Catherine M; Zinner, Darren E; Rao, Sowmya R; Iezzoni, Lisa I; Campbell, Eric G

    2010-04-01

    To determine whether professional activities, professional productivity, and salaries of life sciences faculty differ by gender. The authors undertook this study because previous studies found differences in the academic experiences of women and men. In 2007, the authors conducted a mailed survey of 3,080 life sciences faculty at the 50 universities whose medical schools received the greatest amount of National Institutes of Health funding in 2004. The response rate was 74% (n = 2,168). The main outcome measures were a faculty member's total number of publications; number of publications in the past three years; average impact score of the journals in which he or she had published; professional activities; work hours per week; the numbers of hours spent specifically in teaching, patient care, research, professional activities, and administrative activities; and annual income. Among professors, the women reported greater numbers of hours worked per week and greater numbers of administrative and professional activities than did the men. Female faculty members reported fewer publications across all ranks. After control for professional characteristics and productivity, female researchers in the life sciences earned, on average, approximately $13,226 less annually than did their male counterparts. Men and women in the academic life sciences take on different roles as they advance through their careers. A substantial salary gap still exists between men and women that cannot be explained by productivity or other professional factors. Compensation and advancement policies should recognize the full scope of the roles that female researchers play.

  11. Combination of potassium sorbate and irradiation treatments to extend the shelf life of cured fish products

    International Nuclear Information System (INIS)

    Maha, M.; Sudarman, H.; Chosdu, R.; Siagian, E.G.

    1989-01-01

    Studies on shelf life extension of three kinds of cured fish products, i.e. salted chub mackeral (Rastrelliger neglectus), boiled chub mackerel (Rastrelliger neglectus) and smoked milkfish (Chanos chanos) have been made using a combined potassium sorbate and irradiation treatment. An integrated process for the preparation of each cured product provided with the combination treatment is described. Total bacterial count, total volatile base nitrogen, volatile reducing substances, and mould growth were used as objective indices of quality in comparison with sensory evaluation to determine the shelf life of the products held at ambient conditions. It was found that 0.1% potassium sorbate followed by irradiation up to 4 kGy retards mould growth on the products and extends the shelf life to a considerable length of time in comparison with the commercially prepared products. (author). 14 refs, 3 figs, 5 tabs

  12. Omaeluloolisus eesti teatris: Merle Karusoo lavastustest. Life Narratives and Estonian Theatre: The Productions of Merle Karusoo

    Directory of Open Access Journals (Sweden)

    Piret Kruuspere

    2012-04-01

    Full Text Available Any consideration of Estonian theatre from the point of view of biographical theatre needs to include the work of playwright and director Merle Karusoo. Productions based on various life narratives (diaries, letters, biographical interviews form the core of her work that can be defined as biographical or memory theatre. Her work has also been viewed within the context of community theatre or political theatre; Karusoo has herself referred to her work as sociological theatre. Life narratives have functioned in Karusoo’s productions as the basis for restoring oppressed or denied collective discourses of memory. Her productions emerged within the framework of the more general process of restoration of historical heritage and the rehabilitation of collective memory at the end of the 1980s and the beginning of the 1990s. Life story can be viewed as the essence of Merle Karusoo’s theatre. The personal in the life story in the production activates the emotional memory of the audience; for older generations such theatre facilitates a legitimisation of remembering one’s life story in entirety, and for younger generations it functions as a vehicle of collective, historical and national memory. The current article outlines the main stages of Karusoo’s biographical theatre, highlights major productions of each stage and provides an overview of their reception. Karusoo’s theatre dates back to 1980s. Productions based on life stories of the generations born in 1950s and 1960s, Meie elulood (Our Biographies and Kui ruumid on täis ... (Full Rooms both in 1982, mediated fragments of life stories of 16 drama students, focusing on the processes of self-conception and -reflection of young persons. In the context of the Soviet regime that exerted firm ideological control over the private lives of its citizens, Karusoo’s productions struck an especially powerful and unusual chord. Karusoo’s biographical theatre has gathered momentum and assumed a more

  13. Effect of length of productive life on genetic trend of milk ... - AJOL

    African Journals Online (AJOL)

    USER

    2010-05-17

    May 17, 2010 ... Longevity is an important economic trait in dairy cattle. Including this trait in a breeding scheme, increases profit. The aim of this study was to evaluate the relationship between length of productive life. (LPL), genetic trend of milk production and profitability of herds. LPL has been defined as time from.

  14. From life cycle assessment to sustainable production: Status and perspectives

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Jeswiet, Jack; Alting, Leo

    2005-01-01

    to the tools for design for disassembly. Life Cycle Engineering is defined, and a systematic hierarchy is presented for the different levels at which environmental impacts from industry can be addressed by the engineer in order to improve the eco-efficiency of the industry. The role of industry in meeting...... the sustainability challenge to our societies is discussed, and it is concluded that industry must include not only the eco-efficiency but also the product's environmental justification and the company ethics in a life cycle perspective in order to become sustainable. In the outlook it is concluded that current...

  15. ESOL facility for the generation and radiochemical separation of short half-life fission products

    International Nuclear Information System (INIS)

    Gehrke, R.J.; Meikrantz, D.H.; Baker, J.D.; Anderl, R.A.; Novick, V.J.; Greenwood, R.C.

    1988-01-01

    A facility has been developed at the Idaho National Engineering Laboratory (INEL) for the generation and rapid radiochemical separation of short half-life mixed fission products. This facility, referred to as the Idaho Elemental Separation On Line (ESOL), consists of electro-plated sources of spontaneously fissioning 252 Cf with a helium jet transport arrangement to continuously deliver short half-life, mixed fission products to the radiochemistry laboratory for rapid, computer controlled, radiochemical separations. 18 refs., 13 figs

  16. Life-Cycle Inventory Analysis of Laminated Veneer Lumber Production in the United States

    Science.gov (United States)

    Richard D. Bergman

    2015-01-01

    Documenting the environmental performance of building products is becoming increasingly common. Developing environmental product declarations (EPDs) based on life-cycle assessment (LCA) data is one way to provide scientific documentation. Many U.S. structural wood products have LCA-based “eco-labels” using the ISO standard. However, the standard requires underlying...

  17. A shorter and more specific oral sensitization-based experimental model of food allergy in mice.

    Science.gov (United States)

    Bailón, Elvira; Cueto-Sola, Margarita; Utrilla, Pilar; Rodríguez-Ruiz, Judith; Garrido-Mesa, Natividad; Zarzuelo, Antonio; Xaus, Jordi; Gálvez, Julio; Comalada, Mònica

    2012-07-31

    Cow's milk protein allergy (CMPA) is one of the most prevalent human food-borne allergies, particularly in children. Experimental animal models have become critical tools with which to perform research on new therapeutic approaches and on the molecular mechanisms involved. However, oral food allergen sensitization in mice requires several weeks and is usually associated with unspecific immune responses. To overcome these inconveniences, we have developed a new food allergy model that takes only two weeks while retaining the main characters of allergic response to food antigens. The new model is characterized by oral sensitization of weaned Balb/c mice with 5 doses of purified cow's milk protein (CMP) plus cholera toxin (CT) for only two weeks and posterior challenge with an intraperitoneal administration of the allergen at the end of the sensitization period. In parallel, we studied a conventional protocol that lasts for seven weeks, and also the non-specific effects exerted by CT in both protocols. The shorter protocol achieves a similar clinical score as the original food allergy model without macroscopically affecting gut morphology or physiology. Moreover, the shorter protocol caused an increased IL-4 production and a more selective antigen-specific IgG1 response. Finally, the extended CT administration during the sensitization period of the conventional protocol is responsible for the exacerbated immune response observed in that model. Therefore, the new model presented here allows a reduction not only in experimental time but also in the number of animals required per experiment while maintaining the features of conventional allergy models. We propose that the new protocol reported will contribute to advancing allergy research. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. Assessing the Life-Cycle Performance of Hydrogen Production via Biofuel Reforming in Europe

    Directory of Open Access Journals (Sweden)

    Ana Susmozas

    2015-06-01

    Full Text Available Currently, hydrogen is mainly produced through steam reforming of natural gas. However, this conventional process involves environmental and energy security concerns. This has led to the development of alternative technologies for (potentially green hydrogen production. In this work, the environmental and energy performance of biohydrogen produced in Europe via steam reforming of glycerol and bio-oil is evaluated from a life-cycle perspective, and contrasted with that of conventional hydrogen from steam methane reforming. Glycerol as a by-product from the production of rapeseed biodiesel and bio-oil from the fast pyrolysis of poplar biomass are considered. The processing plants are simulated in Aspen Plus® to provide inventory data for the life cycle assessment. The environmental impact potentials evaluated include abiotic depletion, global warming, ozone layer depletion, photochemical oxidant formation, land competition, acidification and eutrophication. Furthermore, the cumulative (total and non-renewable energy demand is calculated, as well as the corresponding renewability scores and life-cycle energy balances and efficiencies of the biohydrogen products. In addition to quantitative evidence of the (expected relevance of the feedstock and impact categories considered, results show that poplar-derived bio-oil could be a suitable feedstock for steam reforming, in contrast to first-generation bioglycerol.

  19. One long chain among shorter chains : the Flory approach revisited

    OpenAIRE

    Raphaël , E.; Fredrickson , G.; Pincus , P.

    1992-01-01

    We consider the mean square end-to-end distance of a long chain immersed in a monodisperse, concentrated solution of shorter, chemically identical chains. In contrast with the earlier work of Flory, no simplifying assumption on the wave vector dependence of the effective potential between segments is made. In order to obtain a closed form expression for the dimension of the long chain, we first derive a general expression for the mean square end-to-end distance of a flexible chain with arbitr...

  20. Comparing the environmental footprints of home-care and personal-hygiene products: the relevance of different life-cycle phases.

    Science.gov (United States)

    Koehler, Annette; Wildbolz, Caroline

    2009-11-15

    An in-depth life-cycle assessment of nine home-care and personal-hygiene products was conducted to determine the ecological relevance of different life-cycle phases and compare the environmental profiles of products serving equal applications. Using detailed data from industry and consumer-behavior studies a broad range of environmental impacts were analyzed to identify the main drivers in each life-cycle stage and potentials for improving the environmental footprints. Although chemical production significantly adds to environmental burdens, substantial impacts are caused in the consumer-use phase. As such, this research provides recommendations for product development, supply chain management, product policies, and consumer use. To reduce environmental burdens products should, for instance, be produced in concentrated form, while consumers should apply correct product dosages and low water temperatures during product application.

  1. Storage temperature: A factor of shelf life of dairy products

    Directory of Open Access Journals (Sweden)

    Memiši Nurgin R.

    2014-01-01

    Full Text Available An experiment was designed to monitor the durability of certain dairy products stored at proper temperatures (8°C and elevated temperatures (14°C within their shelf life. Samples of fermented milk products were tested during 25 days, samples of cheese spread products over 80 days, while soft white cheese samples were analyzed during a storage period of 100 days. In the defined study periods, depending on the type of product, pH and aw value of the product, as well as sensory analysis (odor, taste, color and consistency, along with microbiological safety, were investigated. The investigations were performed in accordance with national legislation. The results indicate that the products stored at 14°C showed significant acidity (lower pH value, changed sensory properties, and had an increased number of aerobic bacteria. [Projekat Ministarstva nauke Republike Srbije, br. III 46009: Improvement and development of hygienic and technological procedures in production of foodstuffs of animal origin with the aim of producing high-quality and safe products competitive on the global market

  2. Shelf life extension as solution for environmental impact mitigation: A case study for bakery products.

    Science.gov (United States)

    Bacenetti, Jacopo; Cavaliere, Alessia; Falcone, Giacomo; Giovenzana, Valentina; Banterle, Alessandro; Guidetti, Riccardo

    2018-06-15

    Over the last years, increasing attention has been paid to environmental concerns related to food production and potential solutions to this issue. Among the different strategies being considered to reduce the impact food production has on the environment, only moderate has been paid to the extension of shelf life; a longer shelf life can reduce food losses as well as the economic and environmental impacts of the distribution logistics. The aim of this study is to assess the environmental performance of whole-wheat breadsticks with extended shelf lives and to evaluate whether the shelf-life extension is an effective mitigation solution from an environmental point of view. To this purpose, the life cycle assessment (LCA) approach was applied from a "cradle-to-grave" perspective. Rosmarinic acid was used as an antioxidant to extend the shelf life. To test the robustness of the results and to investigate the influence of the choices made in the modelling phase, a sensitivity and uncertainty analysis were carried out. The achieved results highlighted how, for 10 of the 12 evaluated impact categories, the shelf-life extension is a proper mitigation solution, and its effectiveness depends on the magnitude of product loss reduction that is achieved. The shelf-life extension doesn't allow for the reduction of environmental impact in the categories of human toxicity, cancer effects and freshwater eutrophication. Copyright © 2018 Elsevier B.V. All rights reserved.

  3. Impact of nocturnal heartburn on quality of life, sleep, and productivity: the SINERGE study.

    Science.gov (United States)

    Calleja, José Luis; Bixquert, M; Maldonado, J

    2007-10-01

    The aim of the SINERGE study was to assess the impact of nocturnal heartburn on quality of life, sleep, and productivity. Ambulatory patients >/=18 years old and classified as defined cases of nocturnal heartburn (n=337), nonnocturnal heartburn (n=139), uncontrolled hypertension (n=198), and symptomatic depression (n=104) were included in this cross-sectional study. Information on age, gender, body mass index, and comorbidity was collected and the following validated questionnaires were applied: SF-12, Pittsburgh Sleep Quality Index, and Work Productivity and Activity Impairment questionnaire. The prevalence of primary care consultation for heartburn and nocturnal heartburn was 4.7% and 1.9%, respectively. Health-related quality of life, sleep, and productivity were significantly impaired in patients with frequent nocturnal heartburn symptoms as compared with those of the patients without nocturnal symptoms or patients with hypertension. Nocturnal heartburn poses a considerable burden for the sufferer because of the impact on quality of life, sleep, and daily activities.

  4. Effects of shortened host life span on the evolution of parasite life history and virulence in a microbial host-parasite system

    Directory of Open Access Journals (Sweden)

    Koella Jacob C

    2009-03-01

    Full Text Available Abstract Background Ecological factors play an important role in the evolution of parasite exploitation strategies. A common prediction is that, as shorter host life span reduces future opportunities of transmission, parasites compensate with an evolutionary shift towards earlier transmission. They may grow more rapidly within the host, have a shorter latency time and, consequently, be more virulent. Thus, increased extrinsic (i.e., not caused by the parasite host mortality leads to the evolution of more virulent parasites. To test these predictions, we performed a serial transfer experiment, using the protozoan Paramecium caudatum and its bacterial parasite Holospora undulata. We simulated variation in host life span by killing hosts after 11 (early killing or 14 (late killing days post inoculation; after killing, parasite transmission stages were collected and used for a new infection cycle. Results After 13 cycles (≈ 300 generations, parasites from the early-killing treatment were less infectious, but had shorter latency time and higher virulence than those from the late-killing treatment. Overall, shorter latency time was associated with higher parasite loads and thus presumably with more rapid within-host replication. Conclusion The analysis of the means of the two treatments is thus consistent with theory, and suggests that evolution is constrained by trade-offs between virulence, transmission and within-host growth. In contrast, we found little evidence for such trade-offs across parasite selection lines within treatments; thus, to some extent, these traits may evolve independently. This study illustrates how environmental variation (experienced by the host can lead to the evolution of distinct parasite strategies.

  5. Life cycle assessment and the resilience of product systems

    DEFF Research Database (Denmark)

    Pizzol, Massimo

    2015-01-01

    Resilience is the capacity of systems to withstand and recover from disturbance, depends on the structure and architecture of a system, and plays a key role for the sustainability of complex systems. Despite its importance, resilience is not explicitly taken into account by studies of life cycle...... assessment (LCA), which main objective is determining the eco-efficiency of a product system with limited focus on its structure. The question is whether a product system which structure is improved or designed to be more resilient will result in being not only inefficient, but also eco-inefficient, when...... assessed by means of LCA. This study proposes a theoretical modelling approach to compare vulnerable and resilient product systems within the framework of LCA, consisting of assessment of disturbance and system expansion. Examples are provided where the theory is made operational. The structure...

  6. LIFE CYCLE DESIGN GUIDANCE MANUAL - ENVIRONMENTAL REQUIREMENTS AND THE PRODUCT SYSTEM

    Science.gov (United States)

    The U.S Environmental Protection Agency's (EPA) Risk Reduction Engineering Laboratory and the University of Michigan are cooperating in a project to reduce environmental impacts and health risks through product system design. The resulting framework for life cycle design is pr...

  7. Nation-Scale Adoption of Shorter Breast Radiation Therapy Schedules Can Increase Survival in Resource Constrained Economies: Results From a Markov Chain Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Atif J., E-mail: atif.j.khan@rutgers.edu [Department of Radiation Oncology, Robert Wood Johnson Medical School/Cancer Institute of New Jersey, New Brunswick, New Jersey (United States); Rafique, Raza [Suleman Dawood School of Business, Lahore University of Management Sciences, Lahore (Pakistan); Zafar, Waleed [Shaukat Khanum Memorial Cancer Hospital and Research Centre, Lahore (Pakistan); Shah, Chirag [Department of Radiation Oncology, Cleveland Clinic, Cleveland, Ohio (United States); Haffty, Bruce G. [Department of Radiation Oncology, Robert Wood Johnson Medical School/Cancer Institute of New Jersey, New Brunswick, New Jersey (United States); Vicini, Frank [Michigan HealthCare Professionals, Farmington Hills, Michigan (United States); Jamshed, Arif [Shaukat Khanum Memorial Cancer Hospital and Research Centre, Lahore (Pakistan); Zhao, Yao [Rutgers University School of Business, Newark, New Jersey (United States)

    2017-02-01

    Purpose: Hypofractionated whole breast irradiation and accelerated partial breast irradiation (APBI) offer women options for shorter courses of breast radiation therapy. The impact of these shorter schedules on the breast cancer populations of emerging economies with limited radiation therapy resources is unknown. We hypothesized that adoption of these schedules would improve throughput in the system and, by allowing more women access to life-saving treatments, improve patient survival within the system. Methods and Materials: We designed a Markov chain model to simulate the different health states that a postlumpectomy or postmastectomy patient could enter over the course of a 20-year follow-up period. Transition rates between health states were adapted from published data on recurrence rates. We used primary data from a tertiary care hospital in Lahore, Pakistan, to populate the model with proportional use of mastectomy versus breast conservation and to estimate the proportion of patients suitable for APBI. Sensitivity analyses on the use of APBI and relative efficacy of APBI were conducted to study the impact on the population. Results: The shorter schedule resulted in more women alive and more women remaining without evidence of disease (NED) compared with the conventional schedule, with an absolute difference of about 4% and 7% at 15 years, respectively. Among women who had lumpectomies, the chance of remaining alive and with an intact breast was 62% in the hypofractionation model and 54% in the conventional fractionation model. Conclusions: Increasing throughput in the system can result in improved survival, improved chances of remaining without evidence of disease, and improved chances of remaining alive with a breast. These findings are significant and suggest that adoption of hypofractionation in emerging economies is not simply a question of efficiency and cost but one of access to care and patient survivorship.

  8. Nation-Scale Adoption of Shorter Breast Radiation Therapy Schedules Can Increase Survival in Resource Constrained Economies: Results From a Markov Chain Analysis

    International Nuclear Information System (INIS)

    Khan, Atif J.; Rafique, Raza; Zafar, Waleed; Shah, Chirag; Haffty, Bruce G.; Vicini, Frank; Jamshed, Arif; Zhao, Yao

    2017-01-01

    Purpose: Hypofractionated whole breast irradiation and accelerated partial breast irradiation (APBI) offer women options for shorter courses of breast radiation therapy. The impact of these shorter schedules on the breast cancer populations of emerging economies with limited radiation therapy resources is unknown. We hypothesized that adoption of these schedules would improve throughput in the system and, by allowing more women access to life-saving treatments, improve patient survival within the system. Methods and Materials: We designed a Markov chain model to simulate the different health states that a postlumpectomy or postmastectomy patient could enter over the course of a 20-year follow-up period. Transition rates between health states were adapted from published data on recurrence rates. We used primary data from a tertiary care hospital in Lahore, Pakistan, to populate the model with proportional use of mastectomy versus breast conservation and to estimate the proportion of patients suitable for APBI. Sensitivity analyses on the use of APBI and relative efficacy of APBI were conducted to study the impact on the population. Results: The shorter schedule resulted in more women alive and more women remaining without evidence of disease (NED) compared with the conventional schedule, with an absolute difference of about 4% and 7% at 15 years, respectively. Among women who had lumpectomies, the chance of remaining alive and with an intact breast was 62% in the hypofractionation model and 54% in the conventional fractionation model. Conclusions: Increasing throughput in the system can result in improved survival, improved chances of remaining without evidence of disease, and improved chances of remaining alive with a breast. These findings are significant and suggest that adoption of hypofractionation in emerging economies is not simply a question of efficiency and cost but one of access to care and patient survivorship.

  9. Challenges of electricity production scenarios modelling for life cycle assessment of environmental impacts

    International Nuclear Information System (INIS)

    Blanc, Isabelle; Beloin-Saint-Pierre, Didier

    2013-01-01

    This communication presents a first attempt at making a life cycle assessment of prospective electricity production scenarios which were designed in the EnerGEO project. We start by a basic review of system (in this case, scenario) modelling expectations in today's LCA study. We then review some of the challenges of implementation due to the lack of detailed description of present and future electricity production systems. The importance of a detailed description is then shown with an evaluation of uncertainty of life cycle impact assessment results for three scenarios of German electricity production in 2030. The significant uncertainties we found, prevent us from detecting a relevant trend or making any comparison between the three chosen scenarios. We finally come to the conclusion that the LCA methodology will become relevant for the environmental assessment of electricity production scenarios when many more detailed information are accounted to describe future technologies, structures and sources of energy. (orig.)

  10. Challenges of electricity production scenarios modelling for life cycle assessment of environmental impacts

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, Isabelle; Beloin-Saint-Pierre, Didier [MINES ParisTech, Sophia Antipolis (France). Observation, Impacts, Energy Center

    2013-07-01

    This communication presents a first attempt at making a life cycle assessment of prospective electricity production scenarios which were designed in the EnerGEO project. We start by a basic review of system (in this case, scenario) modelling expectations in today's LCA study. We then review some of the challenges of implementation due to the lack of detailed description of present and future electricity production systems. The importance of a detailed description is then shown with an evaluation of uncertainty of life cycle impact assessment results for three scenarios of German electricity production in 2030. The significant uncertainties we found, prevent us from detecting a relevant trend or making any comparison between the three chosen scenarios. We finally come to the conclusion that the LCA methodology will become relevant for the environmental assessment of electricity production scenarios when many more detailed information are accounted to describe future technologies, structures and sources of energy. (orig.)

  11. Physical activity during video capsule endoscopy correlates with shorter bowel transit time.

    Science.gov (United States)

    Stanich, Peter P; Peck, Joshua; Murphy, Christopher; Porter, Kyle M; Meyer, Marty M

    2017-09-01

     Video capsule endoscopy (VCE) is limited by reliance on bowel motility for propulsion, and lack of physical activity has been proposed as a cause of incomplete studies. Our aim was to prospectively investigate the association between physical activity and VCE bowel transit.  Ambulatory outpatients receiving VCE were eligible for the study. A pedometer was attached at the time of VCE ingestion and step count was recorded at the end of the procedure. VCE completion was assessed by logistic regression models, which included step count (500 steps as one unit). Total transit time was analyzed by Cox proportional hazards models. The hazard ratios (HR) with 95 % confidence interval (CI) indicated the "hazard" of completion, such that HRs > 1 indicated a reduced transit time.  A total of 100 patients were included. VCE was completed in 93 patients (93 %). The median step count was 2782 steps. Step count was not significantly associated with VCE completion (odds ratio 1.45, 95 %CI 0.84, 2.49). Pedometer step count was significantly associated with shorter total, gastric, and small-bowel transit times (HR 1.09, 95 %CI 1.03, 1.16; HR 1.05, 95 %CI 1.00, 1.11; HR 1.07, 95 %CI 1.01, 1.14, respectively). Higher body mass index (BMI) was significantly associated with VCE completion (HR 1.87, 95 %CI 1.18, 2.97) and shorter bowel transit times (HR 1.05, 95 %CI 1.02, 1.08).  Increased physical activity during outpatient VCE was associated with shorter bowel transit times but not with study completion. In addition, BMI was a previously unreported clinical characteristic associated with VCE completion and should be included as a variable of interest in future studies.

  12. Impact of schistosomiasis on quality of life and productivity of workers.

    Science.gov (United States)

    Kamel, M I; Moustafa, Y A; Foda, N; Khashab, S; Moemen, M; Abo el-Naga, R M

    2002-01-01

    The effect of schistosomiasis on quality of life (QOL) and productivity of workers was examined. In a textile factory in Alexandria, Egypt, personal, occupational and sociodemographic data were collected from 172 workers with schistosomiasis and 172 workers without schistosomiasis. Several indicators of productivity and the World Health Organization QOL brief were used to determine the impact of schistosomiasis. The disease affected the general, physical and independence, psychological and spiritual, and social domains of QOL. Although the productivity score of workers with schistosomiasis did not differ significantly from the control group, they had significantly lower additional hours of work and lower total incentives/month. A significant relationship was found between severity of schistosomiasis and QOL domains and productivity indicators.

  13. Effects of co-products on the life-cycle impacts of microalgal biodiesel.

    Science.gov (United States)

    Soratana, Kullapa; Barr, William J; Landis, Amy E

    2014-05-01

    Microalgal biodiesel production has been investigated for decades, yet it is not commercially available. Part of the problem is that the production process is energy and chemical intensive due, in part, to the high portion of microalgal biomass left as residues. This study investigated cradle-to-gate life-cycle environmental impacts from six different scenarios of microalgal biodiesel and its co-products. Ozone depletion, global warming, photochemical smog formation, acidification and eutrophication potentials were assessed using the Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI). Monte Carlo Analysis was conducted to investigate the processes with major contribution in each impact category. The market opportunity for each co-product was examined based on supply, demand and prices of the products that could potentially be substituted by the co-products. The results indicated that the scenario with the least life-cycle environmental impacts in all the five impact categories with the highest net energy ratio was the scenario utilizing a multitude of co-products including bioethanol from lipid-extracted microalgae (LEA), biomethane (to produce electricity and heat) from simultaneous saccharification-fermentation (SSF) residues, land-applied material from SSF residue anaerobic digestion (AD) solid digestate, recycling nutrients from SSF residue AD liquid digestate and CO2 recovered from SSF process contributed. Decreasing the energy consumption of the centrifuge in the land-applied material production process and increasing the lipid content of microalgae can reduce environmental footprints of the co-products. The same scenario also had the highest total income indicating their potential as co-products in the market. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Challenges for Life Support Systems in Space Environments, Including Food Production

    Science.gov (United States)

    Wheeler, Raymond M.

    2012-01-01

    Environmental Control and Life Support Systems (ECLSS) refer to the technologies needed to sustain human life in space environments. Histor ically these technologies have focused on providing a breathable atmo sphere, clean water, food, managing wastes, and the associated monitoring capabilities. Depending on the space agency or program, ELCSS has sometimes expanded to include other aspects of managing space enviro nments, such as thermal control, radiation protection, fire detection I suppression, and habitat design. Other times, testing and providing these latter technologies have been associated with the vehicle engi neering. The choice of ECLSS technologies is typically driven by the mission profile and their associated costs and reliabilities. These co sts are largely defined by the mass, volume, power, and crew time req uirements. For missions close to Earth, e.g., low-Earth orbit flights, stowage and resupply of food, some 0 2, and some water are often the most cost effective option. But as missions venture further into spa ce, e.g., transit missions to Mars or asteroids, or surface missions to Moon or Mars, the supply line economics change and the need to clos e the loop on life support consumables increases. These are often ref erred to as closed loop or regenerative life support systems. Regardless of the technologies, the systems must be capable of operating in a space environment, which could include micro to fractional g setting s, high radiation levels, and tightly closed atmospheres, including perhaps reduced cabin pressures. Food production using photosynthetic o rganisms such as plants by nature also provides atmospheric regenerat ion (e.g., CO2 removal and reduction, and 0 2 production), yet to date such "bioregenerative" technologies have not been used due largely t o the high power requirements for lighting. A likely first step in te sting bioregenerative capabilities will involve production of small a mounts of fresh foods to supplement to crew

  15. A two-level strategy to realize life-cycle production optimization in an operational setting

    NARCIS (Netherlands)

    Essen, van G.M.; Hof, Van den P.M.J.; Jansen, J.D.

    2012-01-01

    We present a two-level strategy to improve robustness against uncertainty and model errors in life-cycle flooding optimization. At the upper level, a physics-based large-scale reservoir model is used to determine optimal life-cycle injection and production profiles. At the lower level these profiles

  16. A two-level strategy to realize life-cycle production optimization in an operational setting

    NARCIS (Netherlands)

    Essen, van G.M.; Hof, Van den P.M.J.; Jansen, J.D.

    2013-01-01

    We present a two-level strategy to improve robustness against uncertainty and model errors in life-cycle flooding optimization. At the upper level, a physics-based large-scale reservoir model is used to determine optimal life-cycle injection and production profiles. At the lower level these profiles

  17. Life Cycle Based Evaluation of Environmental and Economic Impacts of Agricultural Productions in the Mediterranean Area

    Directory of Open Access Journals (Sweden)

    Elena Tamburini

    2015-03-01

    Full Text Available In recent years, there has been an increasing interest in Life Cycle Assessment (LCA applied to estimate the cradle-to-grave environmental impact of agricultural products or processes. Furthermore, including in the analysis an economic evaluation, from the perspective of an integrated life cycle approach, appears nowadays as a fundamental improvement. In particular, Life Cycle Costing (LCC, is a method that could integrate financial data and cost information with metrics of life cycle approaches. In this study, LCA in conjunction with LCC methods were used, with the aim to evaluate the main cost drivers—environmental and economic—of five widely diffused and market-valued agricultural productions (organic tomato and pear, integrated wheat, apple and chicory and to combine the results in order to understand the long-term externalities impacts of agricultural productions. Data obtained in local assessment show a wide margin of improvement of resources management at farms level in the short-term, but also allow for the investigation of future effects of environmental impacts not expressed in product price on the market. Reaching a real sustainable model for agriculture could be a value added approach firstly for farmers, but also for all the people who live in rural areas or use agricultural products.

  18. An integrated factor analysis model for product eco-design based on full life cycle assessment

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Z.; Xiao, T.; Li, D.

    2016-07-01

    Among the methods of comprehensive analysis for a product or an enterprise, there exist defects and deficiencies in traditional standard cost analyses and life cycle assessment methods. For example, some methods only emphasize one dimension (such as economic or environmental factors) while neglecting other relevant dimensions. This paper builds a factor analysis model of resource value flow, based on full life cycle assessment and eco-design theory, in order to expose the relevant internal logic between these two factors. The model considers the efficient multiplication of resources, economic efficiency, and environmental efficiency as its core objectives. The model studies the status of resource value flow during the entire life cycle of a product, and gives an in-depth analysis on the mutual logical relationship of product performance, value, resource consumption, and environmental load to reveal the symptoms and potentials in different dimensions. This provides comprehensive, accurate and timely decision-making information for enterprise managers regarding product eco-design, as well as production and management activities. To conclude, it verifies the availability of this evaluation and analysis model using a Chinese SUV manufacturer as an example. (Author)

  19. Do shorter wavelengths improve contrast in optical mammography?

    International Nuclear Information System (INIS)

    Taroni, P; Pifferi, A; Torricelli, A; Spinelli, L; Danesini, G M; Cubeddu, R

    2004-01-01

    The detection of tumours with time-resolved transmittance imaging relies essentially on blood absorption. Previous theoretical and phantom studies have shown that both contrast and spatial resolution of optical images are affected by the optical properties of the background medium, and high absorption and scattering are generally beneficial. Based on these observations, wavelengths shorter than presently used (680-780 nm) could be profitable for optical mammography. A study was thus performed analysing time-resolved transmittance images at 637, 656, 683 and 785 nm obtained from 26 patients bearing 16 tumours and 15 cysts. The optical contrast proved to increase upon decreasing wavelengths for the detection of cancers in late-gated intensity images, with higher gain in contrast for lesions of smaller size (<1.5 cm diameter). For cysts either a progressive increase or decrease in contrast with wavelength was observed in scattering images

  20. [Health related quality of life and productivity of women with overactive bladder].

    Science.gov (United States)

    Péntek, Márta; Gulácsi, László; Majoros, Attila; Piróth, Csaba; Rubliczky, Levente; Böszörményi Nagy, Géza; Törzsök, Ferenc; Timár, Petra; Baji, Petra; Brodszky, Valentin

    2012-07-08

    The objective of the research was to assess the health related quality of life and productivity of women with overactive bladder. A cross-sectional survey was performed in 5 outpatient centers. General health status (EQ-5D), disease-specific quality of life (King's Health Questionnaire) and productivity (Work Productivity and Activity Impairment) were assessed. Sixty-one women with mean age of 57.7 (SD = 11.6) years have had symptoms for 6.6 (SD = 6.2) years and 57 (93%) had incontinence. The EQ-5D (mean 0.668, SD = 0.314) was not significantly lower than that of the average population (p>0.05). The impact of incontinence and physical limitation (mean 70.5 and 68.9, respectively) were significant, the King's Health Questionnaire-utility was 0.932 (SD = 0.029). Productivity scores of involved patients were: absenteeism 0.04% (SD = 0.11), presenteeism 43.64% (SD = 28.54), overall work impairment 40.97% (SD = 26.91), and other activities 47.72% (SD = 27.24). Applicability of the EQ-5D and King's Health Questionnaire as utility measures in overactive bladder deserve further research. Presenteeism should be considered in the evaluation of the therapy.

  1. Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2012-01-01

    on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...... IPDs with regard to longevity and adaptability. CONCLUSION The new type of service-focused IPD and the related life-cycle responsibility (development, building phase, maintenance and dismantling/adaption/recycling) creates incentive to integrate life cycle thinking into the development process of IPDs......, resulting in more sustainable building solutions with a greater extend of positive environmental, economical and social impacts. The research presented will also show the importance of adaption and configuration of these complex building components by architects and planners, as they will have a great...

  2. Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2012-01-01

    extension to the concept of IPDs discussed. Due to extended product responsibility, the concept of PSSs will offer new possibilities of planning and pre-defining life cycles of IPDs more precisely than for regular building components. Reducing or eliminating point-of-sales will induce producers to optimize...

  3. Resource consumption and environmental impacts of the agrofood sector: life cycle assessment of italian citrus-based products.

    Science.gov (United States)

    Beccali, Marco; Cellura, Maurizio; Iudicello, Maria; Mistretta, Marina

    2009-04-01

    Food production and consumption cause significant environmental burdens during the product life cycles. As a result of intensive development and the changing social attitudes and behaviors in the last century, the agrofood sector is the highest resource consumer after housing in the EU. This paper is part of an effort to estimate environmental impacts associated with life cycles of the agrofood chain, such as primary energy consumption, water exploitation, and global warming. Life cycle assessment is used to investigate the production of the following citrus-based products in Italy: essential oil, natural juice, and concentrated juice from oranges and lemons. The related process flowcharts, the relevant mass and energy flows, and the key environmental issues are identified for each product. This paper represents one of the first studies on the environmental impacts from cradle to gate for citrus products in order to suggest feasible strategies and actions to improve their environmental performance.

  4. Updated Life-Cycle Assessment of Aluminum Production and Semi-fabrication for the GREET Model

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Qiang [Argonne National Lab. (ANL), Argonne, IL (United States); Kelly, Jarod C. [Argonne National Lab. (ANL), Argonne, IL (United States); Burnham, Andrew [Argonne National Lab. (ANL), Argonne, IL (United States); Elgowainy, Amgad [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    This report serves as an update for the life-cycle analysis (LCA) of aluminum production based on the most recent data representing the state-of-the-art of the industry in North America. The 2013 Aluminum Association (AA) LCA report on the environmental footprint of semifinished aluminum products in North America provides the basis for the update (The Aluminum Association, 2013). The scope of this study covers primary aluminum production, secondary aluminum production, as well as aluminum semi-fabrication processes including hot rolling, cold rolling, extrusion and shape casting. This report focuses on energy consumptions, material inputs and criteria air pollutant emissions for each process from the cradle-to-gate of aluminum, which starts from bauxite extraction, and ends with manufacturing of semi-fabricated aluminum products. The life-cycle inventory (LCI) tables compiled are to be incorporated into the vehicle cycle model of Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) Model for the release of its 2015 version.

  5. Life project of adolescents, a product of socio-educational work of school

    Directory of Open Access Journals (Sweden)

    Maibel Rebollar-Ferrer

    2016-10-01

    Full Text Available The improvement of formative work, through a life orientation that is characterized by the correspondence of aspirations or individual goals, potentials and social demands is a challenge to Junior high school in the design and implementation of sócio–educative system of actions, that led by principals and teachers, integrates socializing agents, in order to prepare adolescents in managing a developmental life project to ensure their integration into dynamic and complex society. This research paper nowadays, from the pedagogical, psychological and sociological references, a conceptual basis for understanding adolescents’ life project as an expression of integral formation and the product of social and educational work of school.

  6. Product configuration system and its impact on product’s life cycle complexity

    DEFF Research Database (Denmark)

    Myrodia, Anna; Kristjansdottir, Katrin; Shafiee, Sara

    2016-01-01

    The purpose of this paper is to identify areas throughout a product's lifecycle processes where complexity can be reduced by implementing a product configuration system (PCS). As discussed in the literature, several benefits are realized by using a PCS in terms of product and process standardizat...... for the company in several life cycle processes....... standardization. This also leads to control and reduce of complexity both in products and processes. To this end, this research attempts to quantify and assess these benefits and is supported by empirical evidence. A case study of an engineering company is used and the results indicate significant improvements...

  7. Investigating the life-span of cork products through a longitudinal approach with users- Interim results

    NARCIS (Netherlands)

    Da Silva Pereira, A.C.; Brezet, J.C.; Pereira, H.; Vogtlander, J.G.

    2012-01-01

    Products with long life-spans are generally preferred form an environmental perspective. This paper addresses the longevity of cork products, and the respective influencing aspects. This is accomplished through a longitudinal study where several cork products are used, and at different moments in

  8. Accelerated stress testing in a time-driven product development process

    NARCIS (Netherlands)

    Lu, Y.; Loh, H.T.; Brombacher, A.C.; Ouden, den P.H.

    2000-01-01

    In order to compete in the market, companies have to produce the right products with a shorter time to market and at lower costs than before. Shorter time to market requires the product development process (PDP) to change the way of working from the classical ‘wait and react’ to anticipating and

  9. A New Dynamic Pricing Model for the Effective Sustainability of Perishable Product Life Cycle

    OpenAIRE

    Pırıl Tekin; Rızvan Erol

    2017-01-01

    Perishable products run their life cycle in a short period of time due to the shortness of their shelf lives. Product efficiency falls when especially non-recyclable products are thrown away without being used. Furthermore, this kind of products that unnecessarily occupy shelves of supermarkets cause supermarkets to follow an insufficient stock management policy. Unconscious and unplanned use of our limited natural resources will deteriorate the product portfolio for future generations. Such ...

  10. Applications of pharmacogenomics in regulatory science: a product life cycle review.

    Science.gov (United States)

    Tan-Koi, W C; Leow, P C; Teo, Y Y

    2018-05-22

    With rapid developments of pharmacogenomics (PGx) and regulatory science, it is important to understand the current PGx integration in product life cycle, impact on clinical practice thus far and opportunities ahead. We conducted a cross-sectional review on PGx-related regulatory documents and implementation guidelines in the United States and Europe. Our review found that although PGx-related guidance in both markets span across the entire product life cycle, the scope of implementation guidelines varies across two continents. Approximately one-third of Food and Drug Administration (FDA)-approved drugs with PGx information in drug labels and half of the European labels posted on PharmGKB website contain recommendations on genetic testing. The drugs affected 19 and 15 World Health Organization Anatomical Therapeutic Chemical drug classes (fourth level) in the United States and Europe, respectively, with protein kinase inhibitors (13 drugs in the United States and 16 drugs in Europe) being most prevalent. Topics of emerging interest were novel technologies, adaptive design in clinical trial and sample collection.

  11. Life cycle inventory for the production of germinated oil palm seeds at a selected seed production unit in Malaysia

    Science.gov (United States)

    Khairuddin, Nik Sasha Khatrina; Ismail, B. S.; Muhamad, Halimah; May, Choo Yuen

    2013-11-01

    The increasing global demand for edible oil has encouraged Malaysia to increase the areas under oil palm cultivation. The total demand for germinated oil palm seeds in the years 2009, 2010, 2011 and 2012 were 86.4, 76.5, 72.6 and 75.2 million, respectively. Production of germinated oil palm seeds is the first link in the palm oil supply chain. Therefore, good management practices at seed production stage is required to ensure only high quality germinated oil palm seeds are produced before sale to customers. Life cycle assessment (LCA) has been used as a tool to assess environmental impact of the processes throughout a product's lifespan and this approach is an important tool for assessing green house gas (GHG) emission. For this study, a gate-to-gate life cycle inventory (LCI) of a single germinated oil palm seed production unit was carried out. The functional unit used for this LCI was one germinated oil palm seed. To determine the environmental impact for the production of germinated oil palm seeds, information on the inputs were obtained. The inputs for the production of germinated oil palm seeds involved materials such as polyethylene bags, electricity, water, chemicals and fungicides. For this study, the system boundary involved seed germination process and management of germinated oil palm seeds. It was found that the amount of input such as materials and energy used in the production of germinated oil palm seeds was very minimal.

  12. Prices over the Product Life Cycle: Implications for Quality-Adjustment and the Measurement of Inflation

    OpenAIRE

    Daniel Melser; Iqbal A. Syed

    2013-01-01

    The paper explores the extent to which products follow systematic pricing patterns over their life cycle and the impact this has on the measurement of inflation. Using a large US scanner data set on supermarket products and applying exible regression methods, we find that on average prices decline as items age. This life cycle price change is often attributed to quality difference in the construction of CPI as items are replaced due to disappearance and at sample rotations. This introduces a ...

  13. Life Cycle Environmental Impact Assessment of Local Wine Production and Consumption in Texas: Using LCA to Inspire Environmental Improvements

    OpenAIRE

    Poupart, Ashley

    2017-01-01

    The future viability of wine production is directly linked to its environmental impacts and conditions in which it is required to operate. The environmental impacts related to the production of a food product are directly influenced by the amount of materials, energy, waste and the emissions the product releases throughout the products life cycle. A life cycle assessment (LCA) provides a framework that can identify a food products relative environmental impacts and provides insights into the ...

  14. Fatigue life prediction for a cold worked T316 stainless steel

    International Nuclear Information System (INIS)

    Manjoine, M.J.

    1983-01-01

    Permanent damage curves of initiation-life and propagation-life which predict the fatigue life of specimens of a cold-worked type 316 stainless steel under complex strain-range histories were generated by a limited test program. Analysis of the test data showed that fatigue damage is not linear throughout life and that propagation life is longer than initiation-life at high strain ranges but is shorter at low strain ranges. If permanent damage has been initiated by prior history and/or fabrication, propagation to a given life can occur at a lower strain range than that estimated from the fatigue curves for constant CSR. (author) [pt

  15. assessment of environmental impacts in comfortable furniture production process using life cycle assessment (LCA technique

    Directory of Open Access Journals (Sweden)

    hejhar abbasi

    2016-12-01

    Full Text Available Furniture industry releases annually a large amount of volatile organic compound to the environment due to the use of adhesives, textiles, paints and coating materials. There are some different methods to measure the load of pollutions and the environmental impacts. Life cycle assessment (LCA is one of the best techniques. LCA is a technique in which all environmental impacts related to a product assessed all over its life cycle, from cradle to grave, and ultimately can be used to improve the production process and to prevent unsuitable environmental impacts. In summary, it can be concluded that the use of this technique is the basis for sustainable development and improving social, economic, and environmental indices. This study focused on the collecting of a comprehensive life cycle inventory data for comfortable furniture in two different production processes (B1 and B2 located in Tehran province, and analyzed the environmental impacts during the production process as gate to gate investigation. The results revealed that emissions in production process B1 were higher than that of production process B2. The reason for this is that basic operations such as sawing and frame assembling along with final operation have been done in the same unit for case B1. Textile production and usage, and polyurethane foam were identified as the main hotspots, respectively. Moreover, the results showed that comfortable furniture production process has the highest effects on ecosystem quality, human health, and resources (fossil fuels and mines, respectively.

  16. An MILP approach to shelf life integrated planning and scheduling in scalded sausage production

    DEFF Research Database (Denmark)

    Günther, H.O.; van Beek, P.; Grunow, Martin

    2006-01-01

    in which shelf life aspects are integrated into operational production planning and scheduling functions. Specifically we make use of so-called Mixed Integer Linear Programming (MILP) models. Our research is based on an industrial case study of yogurt production. Relying on the principle of block planning...

  17. Trapping truffle production in holes: a promising technique for improving production and unravelling truffle life cycle

    Directory of Open Access Journals (Sweden)

    Claude Murat

    2016-10-01

    Full Text Available The Périgord black truffle, Tuber melanosporum Vittad., is an ectomycorrhizal fungus that forms edible hypogeous ascomata. It is now harvested in plantations and is recognized as an agricultural product by European policy. Empirical techniques without scientific demonstration of their efficiency are often used to improve the production of truffles in plantations. One of these techniques is “truffle trapping” which consists in practicing holes inside the potential productive area and to fill them with a substrate containing ascospores. We report an experiment in a truffle orchard where 784 holes were set under 196 trees. Two years after the installation of the holes, 95% of the truffles were found inside the holes corresponding to only 5% of the productive area. This study confirms the efficiency of this empirical technique and demonstrates new ways for in situ studies of the truffle life cycle.

  18. Fatigue life estimation on coke drum due to cycle optimization

    Science.gov (United States)

    Siahaan, Andrey Stephan; Ambarita, Himsar; Kawai, Hideki; Daimaruya, Masashi

    2018-04-01

    In the last decade, due to the increasing demand of petroleum product, the necessity for converting the heavy oil are increasing. Thus, demand for installing coke drum in whole world will be increase. The coke drum undergoes the cyclic high temperature and suddenly cooling but in fact is not designed to withstand that kind of cycle, thus the operational life of coke drum is much shorter in comparison to other equipment in oil refinery. Various factors determine in order to improve reliability and minimize the down time, and it is found that the cycle optimization due to cycle, temperature, and pressure have an important role. From this research it is found that the fatigue life of the short cycle is decrease by a half compare to the normal cycle. It also found that in the preheating stage, the stress peak is far exceed the yield strength of coke drum material and fall into plastic deformation. This is happened because of the temperature leap in the preheating stage that cause thermal shock in the upper part of the skirt of the coke drum.

  19. A Label Correcting Algorithm for Partial Disassembly Sequences in the Production Planning for End-of-Life Products

    Directory of Open Access Journals (Sweden)

    Pei-Fang (Jennifer Tsai

    2012-01-01

    Full Text Available Remanufacturing of used products has become a strategic issue for cost-sensitive businesses. Due to the nature of uncertain supply of end-of-life (EoL products, the reverse logistic can only be sustainable with a dynamic production planning for disassembly process. This research investigates the sequencing of disassembly operations as a single-period partial disassembly optimization (SPPDO problem to minimize total disassembly cost. AND/OR graph representation is used to include all disassembly sequences of a returned product. A label correcting algorithm is proposed to find an optimal partial disassembly plan if a specific reusable subpart is retrieved from the original return. Then, a heuristic procedure that utilizes this polynomial-time algorithm is presented to solve the SPPDO problem. Numerical examples are used to demonstrate the effectiveness of this solution procedure.

  20. A LCA (life cycle assessment) of the methanol production from sugarcane bagasse

    International Nuclear Information System (INIS)

    Reno, Maria Luiza Grillo; Lora, Electo Eduardo Silva; Palacio, Jose Carlos Escobar; Venturini, Osvaldo Jose; Buchgeister, Jens; Almazan, Oscar

    2011-01-01

    Nowadays one of the most important environmental issues is the exponential increase of the greenhouse effect by the polluting action of the industrial and transport sectors. The production of biofuels is considered a viable alternative for the pollution mitigation but also to promote rural development. The work presents an analysis of the environmental impacts of the methanol production from sugarcane bagasse, taking into consideration the balance of the energy life cycle and its net environmental impacts, both are included in a LCA (Life Cycle Assessment) approach. The evaluation is done as a case study of a 100,000 t/y methanol plant, using sugarcane bagasse as raw material. The methanol is produced through the BTL (Biomass to Liquid) route. The results of the environmental impacts were compared to others LCA studies of biofuel and it was showed that there are significant differences of environmental performance among the existing biofuel production system, even for the same feedstock. The differences are dependent on many factors such as farming practices, technology of the biomass conversion. With relation to the result of output/input ratio, the methanol production from sugarcane bagasse showed to be a feasible alternative for the substitution of an amount of fossil methanol obtained from natural gas. -- Highlights: → High and favorable energy ratio value of methanol from bagasse. → Sugarcane production has a low participation on environmental impacts. → The gasification and methanol synthesis can be combined in a biorefinery. → Farming biomass could cause the environmental impact land competition. → The trash of sugarcane can be used successfully in methanol production.

  1. Investigation on life cycle assessment of lead and zinc production

    Directory of Open Access Journals (Sweden)

    Sabere Nazari

    2015-12-01

    Full Text Available Lead and zinc production is one of the main predisposing factors of excessive greenhouse gases emissions, air pollution and water consumption. In this paper, the environmental problems of lead and zinc production in Calcimin plant are expressed and life cycle assessment of this plant is assessed. The data regarding the amount of induced global warming and pollution, acidification, and depletion of water resources were collected and discussed. It was concluded that depletion of water resources affected the environment and this was the main issue of the lead and zinc production of this plant. According to the results, in the global warming’s impact category, the proportion of carbon dioxide is more than that of methane. The results also showed that in the acidification’s impact category, the nitrogen oxide proportion is greater compared to that of the sulfur dioxide.

  2. The risk of shorter fasting time for pediatric deep sedation.

    Science.gov (United States)

    Clark, Mathew; Birisci, Esma; Anderson, Jordan E; Anliker, Christina M; Bryant, Micheal A; Downs, Craig; Dalabih, Abdallah

    2016-01-01

    Current guidelines adopted by the American Academy of Pediatrics calls for prolonged fasting times before performing pediatric procedural sedation and analgesia (PSA). PSA is increasingly provided to children outside of the operating theater by sedation trained pediatric providers and does not require airway manipulation. We investigated the safety of a shorter fasting time compared to a longer and guideline compliant fasting time. We tried to identify the association between fasting time and sedation-related complications. This is a prospective observational study that included children 2 months to 18 years of age and had an American Society of Anesthesiologists physical status classification of I or II, who underwent deep sedation for elective procedures, performed by pediatric critical care providers. Procedures included radiologic imaging studies, electroencephalograms, auditory brainstem response, echocardiograms, Botox injections, and other minor surgical procedures. Subjects were divided into two groups depending on the length of their fasting time (4-6 h and >6 h). Complication rates were calculated and compared between the three groups. In the studied group of 2487 subjects, 1007 (40.5%) had fasting time of 4-6 h and the remaining 1480 (59.5%) subjects had fasted for >6 h. There were no statistically significant differences in any of the studied complications between the two groups. This study found no difference in complication rate in regard to the fasting time among our subjects cohort, which included only healthy children receiving elective procedures performed by sedation trained pediatric critical care providers. This suggests that using shorter fasting time may be safe for procedures performed outside of the operating theater that does not involve high-risk patients or airway manipulation.

  3. Integrated Metrics for Improving the Life Cycle Approach to Assessing Product System Sustainability

    Directory of Open Access Journals (Sweden)

    Wesley Ingwersen

    2014-03-01

    Full Text Available Life cycle approaches are critical for identifying and reducing environmental burdens of products. While these methods can indicate potential environmental impacts of a product, current Life Cycle Assessment (LCA methods fail to integrate the multiple impacts of a system into unified measures of social, economic or environmental performance related to sustainability. Integrated metrics that combine multiple aspects of system performance based on a common scientific or economic principle have proven to be valuable for sustainability evaluation. In this work, we propose methods of adapting four integrated metrics for use with LCAs of product systems: ecological footprint, emergy, green net value added, and Fisher information. These metrics provide information on the full product system in land, energy, monetary equivalents, and as a unitless information index; each bundled with one or more indicators for reporting. When used together and for relative comparison, integrated metrics provide a broader coverage of sustainability aspects from multiple theoretical perspectives that is more likely to illuminate potential issues than individual impact indicators. These integrated metrics are recommended for use in combination with traditional indicators used in LCA. Future work will test and demonstrate the value of using these integrated metrics and combinations to assess product system sustainability.

  4. Life cycle costs for the optimized production of hydrogen and biogas from microalgae

    International Nuclear Information System (INIS)

    Meyer, Markus A.; Weiss, Annika

    2014-01-01

    Despite the known advantages of microalgae compared with other biomass providers or fossil fuels, microalgae are predominately produced for high-value products. Economic constraints might limit the commercial energetic use of microalgae. Therefore, we identify the LCCs (life cycle costs) and economic hot spots for photoautotrophic hydrogen generation from photoautotrophically grown Chlamydomonas reinhardtii in a novel staggered PBR (photobioreactor) and the anaerobic digestion of the residual biomass to obtain biogas. The novel PBR aims at minimizing energy consumption for mixing and aeration and at optimizing the light conditions for algal growth. The LCCs per MJ amounted to 12.17 Euro for hydrogen and 0.99 Euro for biogas in 2011 for Germany. Market prices per MJ of 0.02 Euro for biogas and 0.04 Euro for hydrogen are considerably exceeded. Major contributors to operating costs, about 70% of total LCCs, are personnel and overhead costs. The investment costs consist to about 92% of those for the PBR with a share of 61% membrane costs. The choice of Madrid as another production location with higher incident solar irradiation and lower personnel costs reduces LCCs by about 40%. Projecting LCCs to 2030 with experience curves, the LCCs still exceed future market prices. - Highlights: • Life cycle cost assessment of hydrogen and biogas from microalgae in a novel photobioreactor. • Current and future (2030) economically viable production unlikely in Germany. • Personnel and photobioreactor costs are major cost drivers. • Changing the production location may significantly reduce the life cycle costs

  5. Short-term planning and the life-cycle consumption puzzle

    OpenAIRE

    Frank Caliendo; David Aadland

    2004-01-01

    This paper provides a new explanation for the hump-shaped age- consumption profile observed in household data. Standard life-cycle models are based on an optimization problem that spans the entire life expectancy. Alternatively, we examine the consumption profile of an individual with a shorter planning horizon. The actual consumption profile is the envelope of a continuum of control problems because the agent’s short-term planning horizon continually slides along the time- scale, and the age...

  6. Comparison of Algal Biodiesel Production Pathways Using Life Cycle Assessment Tool

    DEFF Research Database (Denmark)

    Singh, Anoop; Olsen, Stig Irving

    2013-01-01

    The consideration of algal biomass in biodiesel production increased very rapidly in the last decade. A life cycle assessment (LCA) study is presented to compare six different biodiesel production pathways (three different harvesting techniques, i.e., aluminum as flocculent, lime flocculent, and ......, ecosystem quality, and resources were higher than the conventional diesel. This study recommends more practical data at pilot-scale production plant with maximum utilization of by-products generated during the production to produce a sustainable algal biodiesel......., and centrifugation, and two different oil extraction methods, i.e., supercritical CO2 (sCO2) and press and co-solvent extraction). The cultivation of Nannochloropsis sp. considered in a flat-panel photobioreactor (FPPBR). These algal biodiesel production systems were compared with the conventional diesel in a EURO 5...... passenger car used for transport purpose (functional unit 1 person km (pkm). The algal biodiesel production systems provide lesser impact (22–105 %) in comparison with conventional diesel. Impacts of algal biodiesel on climate change were far better than conventional diesel, but impacts on human health...

  7. Life Cycle Assessment of pig production systems of the Noir de Bigorre chain

    OpenAIRE

    Garcia-Launay, F; Rouillon, V; Faure, J; Fonseca, A

    2018-01-01

    Outdoor pig production systems relying on local pig breeds may cope with environmental and socio-economic challenges. They produce high quality products with added economic value and rely mainly on local feed resources. Within the European TREASURE project, we conducted the Life Cycle Assessment (LCA) of the Noir de Bigorre (NDB) pig production systems located in South West of France. The environmental impacts were calculated at farm gate and expressed per kg live pig and per ha land use. Fro...

  8. Pricing decision model for new and remanufactured short-life cycle products with time-dependent demand

    Directory of Open Access Journals (Sweden)

    Shu San Gan

    2015-12-01

    Full Text Available In this study we develop a model that optimizes the price for new and remanufactured short life-cycle products where demands are time-dependent and price sensitive. While there has been very few published works that attempt to model remanufacturing decisions for products with short life cycle, we believe that there are many situations where remanufacturing short life cycle products is rewarding economically as well as environmentally. The system that we model consists of a retailer, a manufacturer, and a collector of used product from the end customers. Two different scenarios are evaluated for the system. The first is the independent situation where each party attempts to maximize his/her own total profit and the second is the joint profit model where we optimize the combined total profit for all three members of the supply chain. Manufacturer acts as the Stackelberg leader in the independently optimized scenario, while in the other the intermediate prices are determined by coordinated pricing policy. The results suggest that (i reducing the price of new products during the decline phase does not give better profit for the whole system, (ii the total profit obtained from optimizing each player is lower than the total profit of the integrated model, and (iii speed of change in demand influences the robustness of the prices as well as the total profit gained.

  9. Improvement by the Life Cycle Control System of University Production With Use of CALS-Tehnology

    Directory of Open Access Journals (Sweden)

    Yuriy I. Dreizis

    2013-01-01

    Full Text Available The mechanism of management by life cycle of production of university with use of CALS technologies is described. Tasks of service of marketing and the quality management department, connected with university product quality control are defined

  10. Intelligent Human Machine Interface Design for Advanced Product Life Cycle Management Systems

    OpenAIRE

    Ahmed, Zeeshan

    2010-01-01

    Designing and implementing an intelligent and user friendly human machine interface for any kind of software or hardware oriented application is always be a challenging task for the designers and developers because it is very difficult to understand the psychology of the user, nature of the work and best suit of the environment. This research paper is basically about to propose an intelligent, flexible and user friendly machine interface for Product Life Cycle Management products or PDM Syste...

  11. Life Cycle Assessment of Hydrogen Production and Consumption in an Isolated Territory

    DEFF Research Database (Denmark)

    Zhao, Guangling; Pedersen, Allan Schrøder

    2018-01-01

    cylinder by road and ferry. The hydrogen is used to provide electricity and heat through fuel cell stacks as well as hydrogen fuel for fuel cell vehicles. In order to evaluate the environmental impacts related to the hydrogen production and utilisation, this work conducts an investigation of the entire...... life cycle of the described hydrogen production, transportation, and utilisation. All the processes related to the equipment manufacture, operation, maintenance, and disposal are considered in this study....

  12. Life Expectancy in Police Officers: A Comparison with the U.S. General Population

    Science.gov (United States)

    Violanti, John M.; Hartley, Tara A.; Gu, Ja K.; Fekedulegn, Desta; Andrew, Michael E.; Burchfiel, Cecil M.

    2016-01-01

    Previous epidemiological research indicates that police officers have an elevated risk of death relative to the general population overall and for several specific causes. Despite the increased risk for mortality found in previous research, controversy still exists over the life expectancy of police officers. The goal of the present study was to compare life expectancy of male police officers from Buffalo New York with the U.S. general male population utilizing an abridged life table method. On average, the life expectancy of Buffalo police officers in our sample was significantly lower than the U.S. population (mean difference in life expectancy =21.9 years; 95% CI: 14.5-29.3; ppolice officers was shorter and differences were more pronounced in younger age categories. Additionally, police officers had a significantly higher average probability of death than did males in the general population (mean difference= 0.40; 95% CI: 0.26,-0.54; ppolice officers was 21 times larger than that of the general population (Buffalo male officers vs. U.S. males = 21.7, 95% CI: 5.8-37.7). Possible reasons for shorter life expectancy among police are discussed, including stress, shift work, obesity, and hazardous environmental work exposures. PMID:24707585

  13. Associations between skeletal growth in childhood and cognitive function in mid-life in a 53-year prospective birth cohort study.

    Directory of Open Access Journals (Sweden)

    Robert Stewart

    Full Text Available Several studies have found that shorter stature (height and limb length in late life is associated with dementia and cognitive impairment. The extent to which childhood environment and early life cognitive function accounts for these associations is not clear.We investigated associations of adult trunk height and leg length with cognitive function in middle age, analysing data from the MRC National Survey of Health and Development: a cohort followed from birth to age 53, 1677 of whom had data on all covariates. The four cognitive tests measured verbal ability, word list memory, verbal fluency and speed/concentration. Early life environmental measures included parental education, poverty, parental divorce, physical health, cognitive ability at age 15, own education and own adult social class.After adjusting for gender, shorter trunk length was associated with lower cognitive function on all four tests and shorter leg length with lower verbal intelligence and word list memory. These associations were only partially attenuated following adjustment for childhood adversity/health but were substantially accounted for by cognitive ability at age 15.Shorter stature was associated with lower cognitive function at age 53, the majority of this association being accounted for by cognitive function at age 15. Reduced cognitive reserve may well account for later associations between anthropometric measures and dementia.

  14. Associations between skeletal growth in childhood and cognitive function in mid-life in a 53-year prospective birth cohort study.

    Science.gov (United States)

    Stewart, Robert; Hardy, Rebecca; Richards, Marcus

    2015-01-01

    Several studies have found that shorter stature (height and limb length) in late life is associated with dementia and cognitive impairment. The extent to which childhood environment and early life cognitive function accounts for these associations is not clear. We investigated associations of adult trunk height and leg length with cognitive function in middle age, analysing data from the MRC National Survey of Health and Development: a cohort followed from birth to age 53, 1677 of whom had data on all covariates. The four cognitive tests measured verbal ability, word list memory, verbal fluency and speed/concentration. Early life environmental measures included parental education, poverty, parental divorce, physical health, cognitive ability at age 15, own education and own adult social class. After adjusting for gender, shorter trunk length was associated with lower cognitive function on all four tests and shorter leg length with lower verbal intelligence and word list memory. These associations were only partially attenuated following adjustment for childhood adversity/health but were substantially accounted for by cognitive ability at age 15. Shorter stature was associated with lower cognitive function at age 53, the majority of this association being accounted for by cognitive function at age 15. Reduced cognitive reserve may well account for later associations between anthropometric measures and dementia.

  15. Eco-Efficiency Assessment of Bioplastics Production Systems and End-of-Life Options

    Directory of Open Access Journals (Sweden)

    Kunnika Changwichan

    2018-03-01

    Full Text Available Bioplastics demand has been increased globally due to concerns regarding environmentally friendly consumption and production. Polylactic acid (PLA, polyhydroxyalkanoates (PHAs, and polybutylene succinate (PBS are promising bioplastics with bio-based feedstocks and property of biodegradability. They are produced by bacterial fermentation of sugars from carbohydrate sources. With flexibility in their properties, PLA, PHAs, and PBS can potentially substitute conventional plastics such as polypropylene (PP, polyethylene terephthalate (PET, and polystyrene (PS. This study aims at evaluating the environmental and economic sustainability of bioplastics production together with end-of-life (EOL options. The combination of environmental and economic indicators, eco-efficiency (E/E, was selected to investigate the performance of PLA, PHAs, and PBS from sugarcane and cassava in comparison with PP. The environmental impacts were determined using life cycle assessment. The product cost was used to represent the economic value. The E/E results showed that the environmental and economic sustainability could be enhanced with 100% mechanical recycling of all kinds of studied plastics. It is also important to highlight that mechanical recycling showed a better performance in terms of E/E than composting of bioplastics.

  16. The Controlled Ecological Life Support System Antarctic Analog Project: Prototype Crop Production and Water Treatment System Performance

    Science.gov (United States)

    Bubenheim, David L.; Flynn, Michael T.; Bates, Maynard; Schlick, Greg; Kliss, Mark (Technical Monitor)

    1997-01-01

    The Controlled Ecological Life Support System (CELSS) Antarctic Analog Project (CAAP), is a joint endeavor between the National Science Foundation, Office of Polar Programs (NSF-OPP) and the NASA. The fundamental objective is to develop, deploy, and operate a testbed of advanced life support technologies at the Amundsen-Scott South Pole Station that enable the objectives of both the NSF and NASA. The functions of food production, water purification, and waste treatment, recycle and reduction provided by CAAP will improve the quality of life for the South Pole inhabitants, reduce logistics dependence, enhance safety and minimize environmental impacts associated with human presence on the polar plateau. Because of the analogous technical, scientific, and mission features with Planetary missions such as a mission to Mars, CAAP provides NASA with a method for validating technologies and overall approaches to supporting humans. Prototype systems for sewage treatment, water recycle and crop production are being evaluated at Ames Research Center. The product water from sewage treatment using a Wiped-Film Rotating Disk is suitable for input to the crop production system. The crop production system has provided an enhanced level of performance compared with projected performance for plant-based life support: an approximate 50% increase in productivity per unit area, more than a 65% decrease in power for plant lighting, and more than a 75% decrease in the total power requirement to produce an equivalent mass of edible biomass.

  17. Representativeness of shorter measurement sessions in long-term indoor air monitoring.

    Science.gov (United States)

    Maciejewska, M; Szczurek, A

    2015-02-01

    Indoor air quality (IAQ) considerably influences health, comfort and the overall performance of people who spend most of their lives in confined spaces. For this reason, there is a strong need to develop methods for IAQ assessment. The fundamental issue in the quantitative determination of IAQ is the duration of measurements. Its inadequate choice may result in providing incorrect information and this potentially leads to wrong conclusions. The most complete information may be acquired through long-term monitoring. However it is typically perceived as impractical due to time and cost load. The aim of this study was to determine whether long-term monitoring can be adequately represented by a shorter measurement session. There were considered three measurable quantities: temperature, relative humidity and carbon dioxide concentration. They are commonly recognized as indicatives for IAQ and may be readily monitored. Scaled Kullback-Leibler divergence, also called relative entropy, was applied as a measure of data representativeness. We considered long-term monitoring in a range from 1 to 9 months. Based on our work, the representative data on CO2 concentration may be acquired while performing measurements during 20% of time dedicated to long-term monitoring. In the case of temperature and relative humidity the respective time demand was 50% of long-term monitoring. From our results, in indoor air monitoring strategies, there could be considered shorter measurement sessions, while still collecting data which are representative for long-term monitoring.

  18. Occupational Health Impacts Due to Exposure to Organic Chemicals over an Entire Product Life Cycle.

    Science.gov (United States)

    Kijko, Gaël; Jolliet, Olivier; Margni, Manuele

    2016-12-06

    This article presents an innovative approach to include occupational exposures to organic chemicals in life cycle impact assessment (LCIA) by building on the characterization factors set out in Kijko et al. (2015) to calculate the potential impact of occupational exposure over the entire supply chain of product or service. Based on an economic input-output model and labor and economic data, the total impacts per dollar of production are provided for 430 commodity categories and range from 0.025 to 6.6 disability-adjusted life years (DALY) per million dollar of final economic demand. The approach is applied on a case study assessing human health impacts over the life cycle of a piece of office furniture. It illustrates how to combine monitoring data collected at the manufacturing facility and averaged sector specific data to model the entire supply chain. This paper makes the inclusion of occupational exposure to chemicals fully compatible with the LCA framework by including the supply chain of a given production process and will help industries focus on the leading causes of human health impacts and prevent impact shifting.

  19. Life Cycle Assessment of Fiber-Reinforced Additive Manufacturing for Injection Molding Insert Production

    DEFF Research Database (Denmark)

    Hofstätter, Thomas; Stotz, Philippe Maurice; Bey, Niki

    2017-01-01

    Additively manufactured (AM) injection molding (IM) inserts have proved to be capable to substitute conventionally manufactured metal inserts with polymer-based insert enforced with short, virgin, unseized carbon fibers (CFs). It has been shown that the implementation of AM technology resulted......, this contribution provides a comparison of environmental performance of conventionally vs. additively manufactured inserts in a full life cycle perspective indicated in Figure 1, including materials, production, use and end-of-life (EoL) stages....

  20. Life cycle inventory of the production of rare earths and the subsequent production of NdFeB rare earth permanent magnets.

    Science.gov (United States)

    Sprecher, Benjamin; Xiao, Yanping; Walton, Allan; Speight, John; Harris, Rex; Kleijn, Rene; Visser, Geert; Kramer, Gert Jan

    2014-04-01

    Neodymium is one of the more critical rare earth elements with respect to current availability and is most often used in high performance magnets. In this paper, we compare the virgin production route of these magnets with two hypothetical recycling processes in terms of environmental impact. The first recycling process looks at manual dismantling of computer hard disk drives (HDDs) combined with a novel hydrogen based recycling process. The second process assumes HDDs are shredded. Our life cycle assessment is based both on up to date literature and on our own experimental data. Because the production process of neodymium oxide is generic to all rare earths, we also report the life cycle inventory data for the production of rare earth oxides separately. We conclude that recycling of neodymium, especially via manual dismantling, is preferable to primary production, with some environmental indicators showing an order of magnitude improvement. The choice of recycling technology is also important with respect to resource recovery. While manual disassembly allows in principle for all magnetic material to be recovered, shredding leads to very low recovery rates (<10%).

  1. New exergy criterion in the 'multi-criteria' context: a life cycle assessment of two plaster products

    International Nuclear Information System (INIS)

    Beccali, Giorgio; Cellura, Maurizio; Mistretta, Marina

    2003-01-01

    This paper deals with the exergy analysis (EXA) of plaster materials and ranks the environmental burdens due to the production of such materials. The calculation of the exergy loss during the whole examined process represents a relevant index, looking at the technology improvement of a process, as a suitable tool in aid of the trade-off of alternative materials in the decision making. A life cycle inventory is performed for building plaster products and the matrix method is used. The authors extend the application of EXA to life cycle assessment, conducting an exergetic life cycle assessment, and propose an exergetic index in the framework of multi-criteria decision making. An exergy balance, accounting for energy and material flows, is applied to calculate the exergy losses and efficiencies for each stage of the examined processes: resources extraction, materials processing, transport and product manufacturing. Furthermore, exergy values are calculated for the pollutants and wastes

  2. Healthy Aging After Age 65: A Life-Span Health Production Function Approach.

    Science.gov (United States)

    Ferdows, Nasim B; Jensen, Gail A; Tarraf, Wassim

    2018-06-01

    This article examines the determinants of healthy aging using Grossman's framework of a health production function. Healthy aging, sometimes described as successful aging, is produced using a variety of inputs, determined in early life, young adulthood, midlife, and later life. A healthy aging production function is estimated using nationally representative data from the 2010 and 2012 Health and Retirement Study on 7,355 noninstitutionalized seniors. Using a simultaneous equation mediation model, we quantify how childhood factors contribute to healthy aging, both directly and indirectly through their effects on mediating adult outcomes. We find that favorable childhood conditions significantly improve healthy aging scores, both directly and indirectly, mediated through education, income, and wealth. We also find that good health habits have positive effects on healthy aging that are larger in magnitude than the effects of childhood factors. Our findings suggest that exercising, maintaining proper weight, and not smoking are likely to translate into healthier aging.

  3. Effects of gamma irradiation on the shelf-life of a dairy-like product

    Science.gov (United States)

    Odueke, Oluwakemi B.; Chadd, Stephen A.; Baines, Richard N.; Farag, Karim W.; Jansson, Jonathan

    2018-02-01

    This study was aimed to assess the effect of irradiation on the shelf-life of pseudo-dairy food product consisting of different concentration levels of the structural and energy-giving caloric component macronutrients (protein, fat and carbohydrate). Gamma irradiated products (1 kGy, 3 kGy, 5 kGy and 10 kGy) were compared to the current procedure used by the industry of non-irradiated dairy products. The study looked at the impact of different treatments on storage quality in respect to physicochemical (pH, acidity, macronutrients), and microbiological properties [total viable count (TVC)]. The products were aseptically packaged in plastic containers and analysed at regular weekly intervals up until 100 days during refrigerated storage at 4 ± 1 °C. The storage period did not bring about any significant change in physicochemical properties of the products throughout the period of study while the TVC displayed a linear regression for irradiated products stored at 4 ± 1 °C as well as the control (non-irradiated). At the end of the shelf-life trial (benchmarked at log 4.3 CFU/g), the total viable count did not exceed log 3.94 CFU/g for samples treated at 10 kGy after 100 days of analysis. These observations indicated that the product could be safely stored aerobically for > 100days (10 and 5 kGy), 56days at (3 kGy), 42 days at (1 kGy) for the irradiated samples' and 14-28 days for the non-irradiated samples without much change in physicochemical and microbiological properties using refrigerated storage.

  4. Life cycle impact assessment of ammonia production in Algeria: A comparison with previous studies

    Energy Technology Data Exchange (ETDEWEB)

    Makhlouf, Ali, E-mail: almakhsme@gmail.com; Serradj, Tayeb; Cheniti, Hamza

    2015-01-15

    In this paper, a Life Cycle Analysis (LCA) from “cradle to gate” of one anhydrous ton of ammonia with a purity of 99% was achieved. Particularly, the energy and environmental performance of the product (ammonia) were evaluated. The eco-profile of the product and the share of each stage of the Life Cycle on the whole environmental impacts have been evaluated. The flows of material and energy for each phase of the life cycle were counted and the associated environmental problems were identified. Evaluation of the impact was achieved using GEMIS 4.7 software. The primary data collection was executed at the production installations located in Algeria (Annaba locality). The analysis was conducted according to the LCA standards ISO 14040 series. The results show that Cumulative Energy Requirement (CER) is of 51.945 × 10{sup 3} MJ/t of ammonia, which is higher than the global average. Global Warming Potential (GWP) is of 1.44 t CO{sub 2} eq/t of ammonia; this value is lower than the world average. Tropospheric ozone precursor and Acidification are also studied in this article, their values are: 549.3 × 10{sup −6} t NMVOC eq and 259.3 × 10{sup −6} t SO{sub 2} eq respectively.

  5. Life cycle impact assessment of ammonia production in Algeria: A comparison with previous studies

    International Nuclear Information System (INIS)

    Makhlouf, Ali; Serradj, Tayeb; Cheniti, Hamza

    2015-01-01

    In this paper, a Life Cycle Analysis (LCA) from “cradle to gate” of one anhydrous ton of ammonia with a purity of 99% was achieved. Particularly, the energy and environmental performance of the product (ammonia) were evaluated. The eco-profile of the product and the share of each stage of the Life Cycle on the whole environmental impacts have been evaluated. The flows of material and energy for each phase of the life cycle were counted and the associated environmental problems were identified. Evaluation of the impact was achieved using GEMIS 4.7 software. The primary data collection was executed at the production installations located in Algeria (Annaba locality). The analysis was conducted according to the LCA standards ISO 14040 series. The results show that Cumulative Energy Requirement (CER) is of 51.945 × 10 3 MJ/t of ammonia, which is higher than the global average. Global Warming Potential (GWP) is of 1.44 t CO 2 eq/t of ammonia; this value is lower than the world average. Tropospheric ozone precursor and Acidification are also studied in this article, their values are: 549.3 × 10 −6 t NMVOC eq and 259.3 × 10 −6 t SO 2 eq respectively

  6. Life history strategies of fish species and biodiversity in eastern USA streams

    Science.gov (United States)

    Meador, Michael R.; Brown, Larry M.

    2015-01-01

    Predictive models have been used to determine fish species that occur less frequently than expected (decreasers) and those that occur more frequently than expected (increasers) in streams in the eastern U.S. Coupling life history traits with 51 decreaser and 38 increaser fish species provided the opportunity to examine potential mechanisms associated with predicted changes in fish species distributions in eastern streams. We assigned six life history traits – fecundity, longevity, maturation age, maximum total length, parental care, and spawning season duration – to each fish species. Decreaser species were significantly smaller in size and shorter-lived with reduced fecundity and shorter spawning seasons compared to increaser species. Cluster analysis of traits revealed correspondence with a life history model defining equilibrium (low fecundity, high parental care), opportunistic (early maturation, low parental care), and periodic (late maturation, high fecundity, low parental care) end-point strategies. Nearly 50 % of decreaser species were associated with an intermediate opportunistic-periodic strategy, suggesting that abiotic factors such as habitat specialization and streamflow alteration may serve as important influences on life history traits and strategies of decreaser species. In contrast, the percent of increaser species among life history strategy groups ranged from 21 to 32 %, suggesting that life history strategies of increaser species were more diverse than those of decreaser species. This study highlights the utility of linking life history theory to biodiversity to better understand mechanisms that contribute to fish species distributions in the eastern U.S.

  7. From menarche to menopause: the fertile life span of celiac women.

    Science.gov (United States)

    Santonicola, Antonella; Iovino, Paola; Cappello, Carmelina; Capone, Pietro; Andreozzi, Paolo; Ciacci, Carolina

    2011-10-01

    We evaluated menopause-associated disorders and fertile life span in women with celiac disease (CD) under untreated conditions and after long-term treatment with a gluten-free diet. The participants were 33 women with CD after menopause (untreated CD group), 25 celiac women consuming a gluten-free diet at least 10 years before menopause (treated CD group), and 45 healthy volunteers (control group). The Menopause Rating Scale questionnaire was used to gather information on menopause-associated disorders. The International Physical Activity Questionnaire was used to acquire information on physical activity. Untreated celiac women had a shorter duration of fertile life span than did the control women because of an older age of menarche and a younger age of menopause (P menopause causes a shorter fertile period in untreated celiac women compared with control women. A gluten-free diet that started at least 10 years before menopause prolongs the fertile life span of celiac women. The perception of intensity of hot flushes and irritability is more severe in untreated celiac women than in controls. Low physical exercise and/or poorer quality of life frequently reported by untreated celiac women might be the cause of reduced discomfort tolerance, thus increasing the subjective perception of menopausal symptoms.

  8. Associations of Smoking, Physical Inactivity, Heavy Drinking, and Obesity with Quality-Adjusted Life Expectancy among US Adults with Depression.

    Science.gov (United States)

    Jia, Haomiao; Zack, Matthew M; Gottesman, Irving I; Thompson, William W

    2018-03-01

    To examine associations between four health behaviors (smoking, physical inactivity, heavy alcohol drinking, and obesity) and three health indices (health-related quality of life, life expectancy, and quality-adjusted life expectancy (QALE)) among US adults with depression. Data were obtained from the 2006, 2008, and 2010 Behavioral Risk Factor Surveillance System data. The EuroQol five-dimensional questionnaire (EQ-5D) health preference scores were estimated on the basis of extrapolations from the Centers for Disease Control and Prevention's healthy days measures. Depression scores were estimated using the eight-item Patient Health Questionnaire. Life expectancy estimates were obtained from US life tables, and QALE was estimated from a weighted combination of the EQ-5D scores and the life expectancy estimates. Outcomes were summarized by depression status for the four health behaviors (smoking, physical inactivity, heavy alcohol drinking, and obesity). For depressed adults, current smokers and the physically inactive had significantly lower EQ-5D scores (0.040 and 0.171, respectively), shorter life expectancy (12.9 and 10.8 years, respectively), and substantially less QALE (8.6 and 10.9 years, respectively). For nondepressed adults, estimated effects were similar but smaller. Heavy alcohol drinking among depressed adults, paradoxically, was associated with higher EQ-5D scores but shorter life expectancy. Obesity was strongly associated with lower EQ-5D scores but only weakly associated with shorter life expectancy. Among depressed adults, physical inactivity and smoking were strongly associated with lower EQ-5D scores, life expectancy, and QALE, whereas obesity and heavy drinking were only weakly associated with these indices. These results suggest that reducing physical inactivity and smoking would improve health more among depressed adults. Copyright © 2018. Published by Elsevier Inc.

  9. Key issues in life cycle assessment of ethanol production from lignocellulosic biomass: Challenges and perspectives.

    Science.gov (United States)

    Singh, Anoop; Pant, Deepak; Korres, Nicholas E; Nizami, Abdul-Sattar; Prasad, Shiv; Murphy, Jerry D

    2010-07-01

    Progressive depletion of conventional fossil fuels with increasing energy consumption and greenhouse gas (GHG) emissions have led to a move towards renewable and sustainable energy sources. Lignocellulosic biomass is available in massive quantities and provides enormous potential for bioethanol production. However, to ascertain optimal biofuel strategies, it is necessary to take into account environmental impacts from cradle to grave. Life cycle assessment (LCA) techniques allow detailed analysis of material and energy fluxes on regional and global scales. This includes indirect inputs to the production process and associated wastes and emissions, and the downstream fate of products in the future. At the same time if not used properly, LCA can lead to incorrect and inappropriate actions on the part of industry and/or policy makers. This paper aims to list key issues for quantifying the use of resources and releases to the environment associated with the entire life cycle of lignocellulosic bioethanol production. Copyright 2009 Elsevier Ltd. All rights reserved.

  10. APPLICATION OF DIHYDROQUERCETIN IN THE PRODUCTION OF PRODUCTS WITH PROLONGED SHELF LIFE

    Directory of Open Access Journals (Sweden)

    O. V. Kostyria

    2015-01-01

    Full Text Available The article describes the use for the production of food products with prolonged shelf-life food additives - dihydroquercetin. Dihydroquercetin is a bioflavonoid natural origin, which has the highest antioxidant activity compared with all known exogenous antioxidants, including vitamins E, A, B, C, D, K, beta-carotene. This connection is included in the list of food additives, do not have harmful effects on health when used for cooking food. Dihydroquercetin is non-toxic, physiologically harmless to human health, not give them a foreign tastes and odors, does not change their color when using it.Additive stable with respect to temperature (from minus 50 to plus 1800 с, mechanical stress , and the processes taking place in the manufacture of products, i.e., meets all the requirements applicable generally to all food additives, and in particular, to the antioxidants. Dihydroquercetin has antibacterial properties against some types of bacteria, and has a positive impact on the development and growth of the lactic microflora. Dihydroquercetin has antibacterial properties against some types of bacteria, and has a positive impact on the development and growth of the lactic microflora. Bioflavonoid is not synthesized in the human body, so you need to eat foods in which it is contained ..In addition, the use of dihydroquercetin will produce food therapeutic orientation that the positive effect of bioflavonoids on human health has been proven through years of experimental and clinical research medical institutions of Russia.

  11. Unlabelled advertorials in Slovenian life-style press: a study of the promotion of health products.

    Science.gov (United States)

    Kovacic, Melita Poler; Erjavec, Karmen; Stular, Katarina

    2011-01-01

    The paper analyses unlabelled advertorials about health products in four life-style magazines and three daily newspapers' life-style supplements in Slovenia. Based on 250 hours of observing the production practice, 20 in-depth interviews with the main participants and a textual analysis of 247 advertorials, supported by three detailed case studies, the process of unlabelled advertorial production was unveiled, reasons for their production explained and their discursive elements of promotion uncovered. Despite their typical news-like appearance, advertorials focus on a product's positive characteristics only and represent an oversimplified viewpoint on health, primarily oriented towards the interest of the pharmaceutical industry. In advertorials, readers are instructed in healthy living and caring about their health through buying the promoted product. No particular differences were found between the magazines and quality dailies' supplements, indicating that the advertorial practice has become a common part of the Slovenian press media scene. The outburst of advertorials in Slovenia is outstanding due to the lack of historical democracy, problems with the supervision of legal transgressions, the small media and advertising market, economic downturns and the financial weakness of the media.

  12. Health programmes for school employees: improving quality of life, health and productivity.

    Science.gov (United States)

    Kolbe, Lloyd J; Tirozzi, Gerald N; Marx, Eva; Bobbitt-Cooke, Mary; Riedel, Sara; Jones, Jack; Schmoyer, Michael

    2005-01-01

    School health programmes in the 21st century could include eight components: 1) health services; 2) health education; 3) healthy physical and psychosocial environments; 4) psychological, counselling, and social services; 5) physical education and other physical activities; 6) healthy food services; and 7) integrated efforts of schools, families, and communities to improve the health of school students and employees. The eighth component of modern school health programmes, health programmes for school employees, is the focus of this article. Health programmes for school employees could be designed to increase the recruitment, retention, and productivity of school employees by partially focusing each of the preceding seven components of the school health programme on improving the health and quality of life of school employees as well as students. Thus, efforts to improve the quality of life, health, and productivity of school employees may be distinct from, but integrated with, efforts to improve the quality of life, health, and education of students. School employee health programmes can improve employee: 1) recruitment; 2) morale; 3) retention; and 4) productivity. They can reduce employee: 5) risk behaviours (e.g., physical inactivity); 6) risk factors (e.g., stress, obesity, high blood pressure); (7) illnesses; 8) work-related injuries; 9) absentee days; 10) worker compensation and disability claims; and 11) health care and health insurance costs. Further, if we hope to improve our schools' performance and raise student achievement levels, developing effective school employee health programmes can increase the likelihood that employees will: 12) serve as healthy role models for students; 13) implement effective school health programmes for students; and 14) present a positive image of the school to the community. If we are to improve the quality of life, health, and productivity of school employees in the 21st century: school administrators, employees, and

  13. Life Cycle Assessment of Hydrogen Production via Natural Gas Steam Reforming; TOPICAL

    International Nuclear Information System (INIS)

    Spath, P. L.; Mann, M. K.

    2000-01-01

    A life cycle assessment of hydrogen production via natural gas steam reforming was performed to examine the net emissions of greenhouse gases as well as other major environmental consequences. LCA is a systematic analytical method that helps identify and evaluate the environmental impacts of a specific process or competing processes

  14. Experiencing the Product Life Cycle Management Highs and Lows through Dramatic Simulation

    Science.gov (United States)

    Pearce, Glenn; Jackson, John

    2009-01-01

    Product life cycle (PLC) stages and diagrams are briefly and dispassionately covered in the standard marketing textbook format with little attention to the social-psychological experiences of those actually participating. This qualitative study used process drama as a teaching tool and a research instrument to probe the PLC phenomenon in a…

  15. Assessment of Predictable Productivity of Nurses Working in Kerman University of Medical Sciences' Teaching Hospitals via the Dimensions of Quality of Work Life.

    Science.gov (United States)

    Borhani, Fariba; Arbabisarjou, Azizollah; Kianian, Toktam; Saber, Saman

    2016-10-01

    Despite the existence of a large community of nurses, specific mechanisms have not been developed yet to consider their needs and the quality of their work life. Moreover, few studies have been conducted to analyze the nature of nursing, nursing places or nurses' quality of work life. In this regard, the present study aimed to assess predictable productivity of nurses working in Kerman University of Medical Sciences' teaching hospitals via the dimensions of Quality of Work Life. The present descriptive-correlational study was conducted to assess predictable productivity of nurses via the dimensions of Quality of Work Life. The study's population consisted of all nurses working in different wards of teaching hospitals associated with Kerman University of Medical Sciences. Out of the whole population, 266 nurses were selected based on the simple random sampling method. To collect data, the questionnaires of 'Quality of Nursing Work Life' and 'Productivity' were used after confirming their reliability (test-retest) and content validity. Finally, the collected data were analyzed through the SPSS software (version 16). Although the quality of work life for nurses was average and their productivity was low but the results showed that quality of life is directly related to nurses' productivity. Quality of life and its dimensions are predictive factors in the in the nurses' productivity. It can conclude that by recognizing the nurses' quality of work life situation, it can realize this group productivity and their values to the efficiency of the health system. For the quality of working life improvement and increasing nurses' productivity more efforts are needed by authorities. The findings can be applied by managers of hospitals and nursing services along with head nurses to enhance the quality of health services and nursing profession in general.

  16. Comparative life cycle assessment and financial analysis of mixed culture polyhydroxyalkanoate production.

    Science.gov (United States)

    Gurieff, Nicholas; Lant, Paul

    2007-12-01

    A life cycle assessment and financial analysis of mixed culture PHA (PHA(MC)) and biogas production was undertaken based on treating an industrial wastewater. Internal rate of return (IRR) and non-renewable CO(2)eq emissions were used to quantify financial viability and environmental impact. PHA(MC) was preferable to biogas production for treating the specified industrial effluent. PHA(MC) was also financially attractive in comparison to pure culture PHA production. Both PHA production processes had similar environmental impacts that were significantly lower than HDPE production. A large potential for optimisation exists for the PHA(MC) process as financial and environmental costs were primarily due to energy use for downstream processing. Under the conditions used in this work PHA(MC) was shown to be a viable biopolymer production process and an effective industrial wastewater treatment technology. This is the first study of its kind and provides valuable insight into the PHA(MC) process.

  17. Comparison of Asian Aquaculture Products by Use of Statistically Supported Life Cycle Assessment

    NARCIS (Netherlands)

    Henriksson, P.J.G.; Rico Artero, A.; Zhang, W.; Nahid, S.S.A.; Newton, R.; Phan, L.T.; Zhang, Z.

    2015-01-01

    We investigated aquaculture production of Asian tiger shrimp, whiteleg shrimp, giant river prawn, tilapia, and pangasius catfish in Bangladesh, China, Thailand, and Vietnam by using life cycle assessments (LCAs), with the purpose of evaluating the comparative eco-efficiency of producing different

  18. Life Expectancy of Brazilian Neurosurgeons.

    Science.gov (United States)

    Botelho, Ricardo Vieira; Jardim Miranda, Bárbara Cristina; Nishikuni, Koshiro; Waisberg, Jaques

    2018-06-01

    Life expectancy (LE) refers to the number of years that an individual is expected to survive. Emphasis is frequently placed on the relationship between LE and the conditions under which a population lives, but fewer studies have investigated the relationship between stress factors associated with specific professions and their effects on LE. The aim of this study is to evaluate Brazilian neurosurgeons' life expectancies (BNLEs) and compare them with those of physicians (both Brazilian and foreign) from other fields, as well as with Brazilian nondoctors. The Brazilian Society of Neurosurgery death registry was used to obtain data that compared LEs from non-neurosurgeon physicians, as described in the national and international literature. BNLEs were also compared with the LEs of Brazilian citizens. Fifty-one neurosurgeons died between 2009 and 2016. All were males. The mean age at death was 68.31 ± 17.71 years. Among all-cause mortality, the breakdown was 20% cardiovascular diseases, 39% malignancies, 10% external factors, 6% gastrointestinal disorders, 12% neurologic illnesses, and 14% unknown causes. BNLE was shorter than LE of male Brazilian citizens. LE was similar among neurosurgeons and other doctors but shorter compared with Brazilian citizens. Further research is needed to provide data that can add to and confirm these results. Copyright © 2018 Elsevier Inc. All rights reserved.

  19. Sex differences in cognitive ageing: testing predictions derived from life-history theory in a dioecious nematode.

    Science.gov (United States)

    Zwoinska, Martyna K; Kolm, Niclas; Maklakov, Alexei A

    2013-12-01

    Life-history theory maintains that organisms allocate limited resources to different traits to maximize fitness. Learning ability and memory are costly and known to trade-off with longevity in invertebrates. However, since the relationship between longevity and fitness often differs between the sexes, it is likely that sexes will differentially resolve the trade-off between learning and longevity. We used an established associative learning paradigm in the dioecious nematode Caenorhabditis remanei, which is sexually dimorphic for lifespan, to study age-related learning ability in males and females. In particular, we tested the hypothesis that females (the shorter-lived sex) show higher learning ability than males early in life but senesce faster. Indeed, young females outperformed young males in learning a novel association between an odour (butanone) and food (bacteria). However, while learning ability and offspring production declined rapidly with age in females, males maintained high levels of these traits until mid-age. These results not only demonstrate sexual dimorphism in age-related learning ability but also suggest that it conforms to predictions derived from the life-history theory. © 2013.

  20. Household production and consumption over the life cycle: National Time Transfer Accounts in 14 European countries

    Directory of Open Access Journals (Sweden)

    Lili Vargha

    2017-03-01

    Full Text Available Background: While the importance of unpaid household labour is recognised in total economic output, little is known about the demographics of household production and consumption. Objective: Our goal is to give a comprehensive estimation on the value of household production and its consumption by age and gender and analyse nonmarket economic transfers in 14 European countries based on publicly available harmonised data. Methods: We introduce a novel imputation method of harmonised European time use (HETUS data to the European Union Statistics on Income and Living Conditions (EU-SILC in order to assign time spent on home production to consumers in households and estimate time transfers. Moreover, monetary values are attributed to household production activities using data on earnings from the Structure of Earnings Survey (SES. Results: We show that the nonmarket economic life cycle of men differs from that of women. The gender gap in household production is not evenly distributed over the life cycle. Women of working age contribute the most in net terms, while the main beneficiaries of household goods and services are children and to a lesser extent adult men. These patterns are similar across countries, with variations in the gender- and age-specific levels of home production and consumption. Conclusions: In Europe, in the national economy, intergenerational flows are important in sustaining both childhood and old age. In contrast, in the household economy, intergenerational transfers flow mostly towards children. Contribution: We add a new focus to the research on household production: While keeping the gender aspect, we demonstrate the importance of the life cycle component in household production.

  1. A thematic review of life cycle assessment (LCA) applied to pig production

    International Nuclear Information System (INIS)

    McAuliffe, Graham A.; Chapman, Deborah V.; Sage, Colin L.

    2016-01-01

    Commercial livestock production is known to have significant impacts on the environment. Pig production is a complex system which involves the production of animal feed, transportation, animal rearing and waste management. One tool for assessing the environmental performance of such complex systems is life cycle assessment (LCA). LCA has been applied to pig production considerably to date. This paper provides a chronological review of state-of-the-art pig production LCAs under three themes: feed production; entire-system livestock rearing; and waste management. The study considers how LCA applications have addressed technological improvements in animal husbandry, and highlights methodological limitations, particularly related to cross-study comparisons. Recent research demonstrates crude protein reduction in feed and anaerobic treatment of pig excreta resulting in bioenergy production are the key targets for environmental performance improvements related to pig production. - Highlights: • An extensive review of LCA applied to pig production is provided chronologically over the past decade. • Individual studies have been categorised into feed, whole-system pig production and waste management themes. • We consider how LCAs have addressed state-of-the-art pig husbandry. • We offer a discussion on key findings, limitations and future research.

  2. A thematic review of life cycle assessment (LCA) applied to pig production

    Energy Technology Data Exchange (ETDEWEB)

    McAuliffe, Graham A., E-mail: g.a.mcauliffe@umail.ucc.ie [Department of Geography, University College Cork, O' Donovan' s Road, Cork (Ireland); School of Biological, Earth and Environmental Sciences, University College Cork, Distillery Fields, North Mall, Cork (Ireland); Chapman, Deborah V. [School of Biological, Earth and Environmental Sciences, University College Cork, Distillery Fields, North Mall, Cork (Ireland); Sage, Colin L. [Department of Geography, University College Cork, O' Donovan' s Road, Cork (Ireland)

    2016-01-15

    Commercial livestock production is known to have significant impacts on the environment. Pig production is a complex system which involves the production of animal feed, transportation, animal rearing and waste management. One tool for assessing the environmental performance of such complex systems is life cycle assessment (LCA). LCA has been applied to pig production considerably to date. This paper provides a chronological review of state-of-the-art pig production LCAs under three themes: feed production; entire-system livestock rearing; and waste management. The study considers how LCA applications have addressed technological improvements in animal husbandry, and highlights methodological limitations, particularly related to cross-study comparisons. Recent research demonstrates crude protein reduction in feed and anaerobic treatment of pig excreta resulting in bioenergy production are the key targets for environmental performance improvements related to pig production. - Highlights: • An extensive review of LCA applied to pig production is provided chronologically over the past decade. • Individual studies have been categorised into feed, whole-system pig production and waste management themes. • We consider how LCAs have addressed state-of-the-art pig husbandry. • We offer a discussion on key findings, limitations and future research.

  3. Identifying improvement potentials in cement production with life cycle assessment.

    Science.gov (United States)

    Boesch, Michael Elias; Hellweg, Stefanie

    2010-12-01

    Cement production is an environmentally relevant process responsible for 5% of total anthropogenic carbon dioxide emissions and 7% of industrial fuel use. In this study, life cycle assessment is used to evaluate improvement potentials in the cement production process in Europe and the USA. With a current fuel substitution rate of 18% in Europe and 11% in the USA, both regions have a substantial potential to reduce greenhouse gas emissions and save virgin resources by further increasing the coprocessing of waste fuels. Upgrading production technology would be particularly effective in the USA where many kiln systems with very low energy efficiency are still in operation. Using best available technology and a thermal substitution rate of 50% for fuels, greenhouse gas emissions could be reduced by 9% for Europe and 18% for the USA per tonne of cement. Since clinker production is the dominant pollution producing step in cement production, the substitution of clinker with mineral components such as ground granulated blast furnace slag or fly ash is an efficient measure to reduce the environmental impact. Blended cements exhibit substantially lower environmental footprints than Portland cement, even if the substitutes feature lower grindability and require additional drying and large transport distances. The highest savings in CO(2) emissions and resource consumption are achieved with a combination of measures in clinker production and cement blending.

  4. Factors Affecting Consumer Purchase Decision on Insurance Product in PT. Prudential Life Assurance Manado

    OpenAIRE

    Esau, Eko Yiswa Rasti

    2015-01-01

    Marketing Mix is the main factor that could affect the whole marketing system. The absence of marketing mix analysis will affecting negatively on a marketing performance. The research aims to analyze the influence of Product, Price, Promotion, People and Process of the Prudential Life Assurance Manado Area on the Consumer Purchase Decision. Data collected through distribution of questionnaires to 100 consumer of Prudential Life Assurance Manado Area. The research used Classic Assumption test ...

  5. Life cycle assessment of hydrogen and power production by supercritical water reforming of glycerol

    International Nuclear Information System (INIS)

    Galera, S.; Gutiérrez Ortiz, F.J.

    2015-01-01

    Highlights: • The environmental performance of the supercritical water reforming (SCWR) of glycerol was assessed. • Biogenic CO 2 emissions allowed quantifying a realistic GHG inventory of 3.8 kg CO 2 -eq/kg H 2 . • The environmental profile of SCWR process was compared to those of other technologies. • A good environmental performance of H 2 and power production by SCWR of glycerol was obtained. - Abstract: The environmental performance of hydrogen and electricity production by supercritical water reforming (SCWR) of glycerol was evaluated following a Life Cycle Assessment (LCA) approach. The heat-integrated process was designed to be energy self-sufficient. Mass and energy balances needed for the study were performed using Aspen Plus 8.4, and the environmental assessment was carried out through SimaPro 8.0. CML 2000 was selected as the life cycle impact assessment method, considering as impact categories the global warming, ozone layer depletion, abiotic depletion, photochemical oxidant formation, eutrophication, acidification, and cumulative energy demand. A distinction between biogenic and fossil CO 2 emissions was done to quantify a more realistic GHG inventory of 3.77 kg CO 2 -eq per kg H 2 produced. Additionally, the environmental profile of SCWR process was compared to other H 2 production technologies such as steam methane reforming, carbon gasification, water electrolysis and dark fermentation among others. This way, it is shown that SCWR of glycerol allows reducing greenhouse gas emissions and obtaining a favorable positive life cycle energy balance, achieving a good environmental performance of H 2 and power production by SCWR of glycerol

  6. Development of fatigue life evaluation technique using miniature specimen

    International Nuclear Information System (INIS)

    Nogami, Shuhei; Nishimura, Arata; Fujiwara, Masaharu; Hisaka, Tomoaki

    2012-01-01

    To develop the fatigue life evaluation technique using miniature specimen, the investigation of the effect of specimen size and specimen shape on the fatigue life and the development of the fatigue testing machine, especially the extensometer, were carried out. The effect of specimen size on the fatigue life was almost negligible for the round-bar specimens. The shorter fatigue life at relatively low strain range conditions for the hourglass specimen that the standard specimen were observed. Therefore the miniature round-bar specimen was considered to be adequate for the fatigue life evaluation using small specimen. Several types of the extensometer system using a strain gauge and a laser has been developed for realizing the fatigue test of the miniature round-bar specimen at high temperature in vacuum. (author)

  7. Life cycle GHG analysis of rice straw bio-DME production and application in Thailand

    International Nuclear Information System (INIS)

    Silalertruksa, Thapat; Gheewala, Shabbir H.; Sagisaka, Masayuki; Yamaguchi, Katsunobu

    2013-01-01

    Highlights: • Life cycle GHG emissions of rice straw bio-DME production in Thailand are assessed. • Bio-DME replaces diesel in engines and supplements LPG for household application. • Rice straw bio-DME in both cases of substitution helps reduce GHG emissions. - Abstract: Thailand is one of the leading countries in rice production and export; an abundance of rice straw, therefore, is left in the field nowadays and is commonly burnt to facilitate quick planting of the next crop. The study assesses the life cycle greenhouse gas (GHG) emissions of using rice straw for bio-DME production in Thailand. The analysis is divided into two scenarios of rice straw bio-DME utilization i.e. used as automotive fuel for diesel engines and used as LPG supplement for household application. The results reveal that that utilization of rice straw for bio-DME in the two scenarios could help reduce GHG emissions by around 14–70% and 2–66%, respectively as compared to the diesel fuel and LPG substituted. In case rice straw is considered as a by-product of rice cultivation, the cultivation of rice straw will be the major source of GHG emission contributing around 50% of the total GHG emissions of rice straw bio-DME production. Several factors that can affect the GHG performance of rice straw bio-DME production are discussed along with measures to enhance GHG performance of rice straw bio-DME production and utilization

  8. Life Cycle Assessment and Release Studies for 15 Nanosilver-Enabled Consumer Products: Investigating Hotspots and Patterns of Contribution.

    Science.gov (United States)

    Pourzahedi, Leila; Vance, Marina; Eckelman, Matthew J

    2017-06-20

    Increasing use of silver nanoparticles (AgNPs) in consumer products as antimicrobial agents has prompted extensive research toward the evaluation of their potential release to the environment and subsequent ecotoxicity to aquatic organisms. It has also been shown that AgNPs can pose significant burdens to the environment from life cycle emissions associated with their production, but these impacts must be considered in the context of actual products that contain nanosilver. Here, a cradle-to-gate life cycle assessment for the production of 15 different AgNP-enabled consumer products was performed, coupled with release studies of those same products, thus providing a consistent analytical platform for investigation of potential nanosilver impacts across a range of product types and concentrations. Environmental burdens were assessed over multiple impact categories defined by the United States Environmental Protection Agency's Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI 2.1) method. Depending on the product composition and silver loading, the contribution of AgNP synthesis to the overall impacts was seen to vary over a wide range from 1% to 99%. Release studies found that solid polymeric samples lost more silver during wash compared to fibrous materials. Estimates of direct ecotoxicity impacts of AgNP releases from those products with the highest leaching rates resulted in lower impact levels compared to cradle-to-gate ecotoxicity from production for those products. Considering both cradle-to-gate production impacts and nanoparticle release studies, in conjunction with estimates of life cycle environmental and health benefits of nanoparticle incorporation, can inform sustainable nanoenabled product design.

  9. The role of romantic attraction and conflict resolution in predicting shorter and longer relationship maintenance among adolescents.

    Science.gov (United States)

    Appel, Israel; Shulman, Shmuel

    2015-04-01

    This study examined the role of romantic attraction and conflict resolution patterns in shorter and longer relationship maintenance among adolescent couples. Data were used from 55 couples aged 15-18 years. Partners completed the Romantic Attraction scale and were observed negotiating a disagreement. Three and 6 months later, they were asked to report whether they were still together. Findings indicated that partners' romantic attraction and the tendency to minimize disagreements during interaction predicted shorter relationship maintenance. In contrast, longer relationship maintenance was predicted by partners' capability to resolve conflicts constructively in a positive atmosphere. Findings are embedded and discussed within Fisher's (2004) evolutionary theory of love.

  10. Shorter Decentralized Attribute-Based Encryption via Extended Dual System Groups

    Directory of Open Access Journals (Sweden)

    Jie Zhang

    2017-01-01

    Full Text Available Decentralized attribute-based encryption (ABE is a special form of multiauthority ABE systems, in which no central authority and global coordination are required other than creating the common reference parameters. In this paper, we propose a new decentralized ABE in prime-order groups by using extended dual system groups. We formulate some assumptions used to prove the security of our scheme. Our proposed scheme is fully secure under the standard k-Lin assumption in random oracle model and can support any monotone access structures. Compared with existing fully secure decentralized ABE systems, our construction has shorter ciphertexts and secret keys. Moreover, fast decryption is achieved in our system, in which ciphertexts can be decrypted with a constant number of pairings.

  11. Fully automatic CNC machining production system

    Directory of Open Access Journals (Sweden)

    Lee Jeng-Dao

    2017-01-01

    Full Text Available Customized manufacturing is increasing years by years. The consumption habits change has been cause the shorter of product life cycle. Therefore, many countries view industry 4.0 as a target to achieve more efficient and more flexible automated production. To develop an automatic loading and unloading CNC machining system via vision inspection is the first step in industrial upgrading. CNC controller is adopted as the main controller to command to the robot, conveyor, and other equipment in this study. Moreover, machine vision systems are used to detect position of material on the conveyor and the edge of the machining material. In addition, Open CNC and SCADA software will be utilized to make real-time monitor, remote system of control, alarm email notification, and parameters collection. Furthermore, RFID has been added to employee classification and management. The machine handshaking has been successfully proposed to achieve automatic vision detect, edge tracing measurement, machining and system parameters collection for data analysis to accomplish industrial automation system integration with real-time monitor.

  12. Life cycle environmental performance of miscanthus gasification versus other technologies for electricity production

    DEFF Research Database (Denmark)

    Nguyen, T Lan T; Hermansen, John Erik

    2015-01-01

    In this paper, the life cycle environmental performance of miscanthus gasification for electricity production in Denmark is evaluated and compared with that of direct combustion and anaerobic digestion. Furthermore, the results obtained are compared to those of natural gas to assess the potential...

  13. Evaluating European imports of Asian aquaculture products using statistically supported life cycle assessments

    NARCIS (Netherlands)

    Henriksson, Patrik John Gustav

    2015-01-01

    This thesis aims to evaluate the environmental sustainability of European imports of farmed aquatic food products from Asia, using life cycle assessment (LCA). Farming of Asian tiger prawn, whiteleg shrimp, freshwater prawn, tilapia and pangasius catfish in Bangladesh, China, Thailand and Vietnam

  14. Adversity and Syndemic Production Among Men Participating in the Multicenter AIDS Cohort Study: A Life-Course Approach

    Science.gov (United States)

    Lim, Sin How; Plankey, Michael W.; Chmiel, Joan S.; Guadamuz, Thomas T.; Kao, Uyen; Shoptaw, Steven; Carrico, Adam; Ostrow, David; Stall, Ron

    2013-01-01

    Objectives. We tested a theory of syndemic production among men who have sex with men (MSM) using data from a large cohort study. Methods. Participants were 1551 men from the Multicenter AIDS Cohort Study enrolled at 4 study sites: Baltimore, Maryland–Washington, DC; Chicago, Illinois; Los Angeles, California; and Pittsburgh, Pennsylvania. Participants who attended semiannual visits from April 1, 2008, to March 31, 2009, completed an additional survey that captured data about events throughout their life course thought to be related to syndemic production. Results. Using multivariate analysis, we found that the majority of life-course predictor variables (e.g., victimization, internalized homophobia) were significantly associated with both the syndemic condition and the component psychosocial health outcomes (depressive symptoms, stress, stimulant use, sexual compulsivity, intimate partner violence). A nested negative binomial analysis showed that the overall life course significantly explained variability in the syndemic outcomes (χ2 = 247.94; P < .001; df = 22). Conclusions. We identified life-course events and conditions related to syndemic production that may help to inform innovative interventions that will effectively disentangle interconnecting health problems and promote health among MSM. PMID:23153154

  15. Deterioration and shelf-life extension of fish and fishery products by modified atmosphere packaging

    OpenAIRE

    Payap Masniyom

    2011-01-01

    Fish and fishery products have been recognized as a nutrition source due to their high protein content. Moreover, theycontain considerable amount of unsaturated fatty acids, especially omega-3 fatty acids, which are regarded as preventivecompounds. However, shelf-life of seafood is limited by biochemical and microbiological changes. Modified atmospherepackaging (MAP) is widely used for minimally processed fishery products including fresh meat for retarding microbial growthand enzymatic spoila...

  16. Development of a Life Cycle Inventory of Water Consumption Associated with the Production of Transportation Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Lampert, David J. [Argonne National Lab. (ANL), Argonne, IL (United States); Cai, Hao [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Zhichao [Argonne National Lab. (ANL), Argonne, IL (United States); Keisman, Jennifer [Argonne National Lab. (ANL), Argonne, IL (United States); Wu, May [Argonne National Lab. (ANL), Argonne, IL (United States); Han, Jeongwoo [Argonne National Lab. (ANL), Argonne, IL (United States); Dunn, Jennifer [Argonne National Lab. (ANL), Argonne, IL (United States); Sullivan, John L. [Argonne National Lab. (ANL), Argonne, IL (United States); Elgowainy, Amgad [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Keisman, Jennifer [American Association for the Advancemetn of Science (AAAS), Washington, DC (United States)

    2015-10-01

    The production of all forms of energy consumes water. To meet increased energy demands, it is essential to quantify the amount of water consumed in the production of different forms of energy. By analyzing the water consumed in different technologies, it is possible to identify areas for improvement in water conservation and reduce water stress in energy-producing regions. The transportation sector is a major consumer of energy in the United States. Because of the relationships between water and energy, the sustainability of transportation is tied to management of water resources. Assessment of water consumption throughout the life cycle of a fuel is necessary to understand its water resource implications. To perform a comparative life cycle assessment of transportation fuels, it is necessary first to develop an inventory of the water consumed in each process in each production supply chain. The Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model is an analytical tool that can used to estimate the full life-cycle environmental impacts of various transportation fuel pathways from wells to wheels. GREET is currently being expanded to include water consumption as a sustainability metric. The purpose of this report was to document data sources and methodologies to estimate water consumption factors (WCF) for the various transportation fuel pathways in GREET. WCFs reflect the quantity of freshwater directly consumed per unit production for various production processes in GREET. These factors do not include consumption of precipitation or low-quality water (e.g., seawater) and reflect only water that is consumed (i.e., not returned to the source from which it was withdrawn). The data in the report can be combined with GREET to compare the life cycle water consumption for different transportation fuels.

  17. Missing Links... Production Structures and Quality of Working Life in the Clothing Industry

    NARCIS (Netherlands)

    Dhondt, S.; Benders, J.G.J.M.

    1998-01-01

    The Dutch version of sociotechnical systems design called “modern sociotechnology” stresses that the quality of working life is dependent on the choice for a certain “production structure”, i.e. the physical layout of operations. Two propositions about this relationship are derived from modern

  18. ATM/RB1 mutations predict shorter overall survival in urothelial cancer.

    Science.gov (United States)

    Yin, Ming; Grivas, Petros; Emamekhoo, Hamid; Mendiratta, Prateek; Ali, Siraj; Hsu, JoAnn; Vasekar, Monali; Drabick, Joseph J; Pal, Sumanta; Joshi, Monika

    2018-03-30

    Mutations of DNA repair genes, e.g. ATM/RB1 , are frequently found in urothelial cancer (UC) and have been associated with better response to cisplatin-based chemotherapy. Further external validation of the prognostic value of ATM/RB1 mutations in UC can inform clinical decision making and trial designs. In the discovery dataset, ATM/RB1 mutations were present in 24% of patients and were associated with shorter OS (adjusted HR 2.67, 95% CI, 1.45-4.92, p = 0.002). There was a higher mutation load in patients carrying ATM/RB1 mutations (median mutation load: 6.7 versus 5.5 per Mb, p = 0.072). In the validation dataset, ATM/RB1 mutations were present in 22.2% of patients and were non-significantly associated with shorter OS (adjusted HR 1.87, 95% CI, 0.97-3.59, p = 0.06) and higher mutation load (median mutation load: 8.1 versus 7.2 per Mb, p = 0.126). Exome sequencing data of 130 bladder UC patients from The Cancer Genome Atlas (TCGA) dataset were analyzed as a discovery cohort to determine the prognostic value of ATM/RB1 mutations. Results were validated in an independent cohort of 81 advanced UC patients. Cox proportional hazard regression analysis was performed to calculate the hazard ratio (HR) and 95% confidence interval (CI) to compare overall survival (OS). ATM/RB1 mutations may be a biomarker of poor prognosis in unselected UC patients and may correlate with higher mutational load. Further studies are required to determine factors that can further stratify prognosis and evaluate predictive role of ATM/RB1 mutation status to immunotherapy and platinum-based chemotherapy.

  19. The effect of shorter exposure versus prolonged exposure on treatment outcome in Tourette syndrome and chronic tic disorders - an open trial.

    Science.gov (United States)

    van de Griendt, Jolande M T M; van Dijk, Maarten K; Verdellen, Cara W J; Verbraak, Marc J P M

    2018-01-11

    Exposure and response prevention has shown to be an effective strategy and is considered a first-line intervention in the behavioural treatment of tic disorders. Prior research demonstrated significant tic reduction after 12 two hour sessions. In this open trial, the question is addressed whether, relative to these prolonged sessions, exposure sessions of shorter duration yield differential outcome for patients with tic disorders. A total of 29 patients diagnosed with Tourette syndrome (TS) or chronic tic disorder were treated with shorter exposure sessions (1 h), and these data were compared to the data from a study about prolonged exposure (2 h, n = 21). Outcome was measured by the Yale Global Tic Severity Scale (YGTSS). Results suggest that after taking the difference in illness duration between the two groups into account, the effectiveness of shorter exposure sessions is not inferior to that of prolonged exposure. Results suggest that treatment with shorter exposure might be more efficient and more patients can be reached. Future research is needed to gain more insight into the mechanisms underlying the efficacy of behavioural treatments for tics.

  20. Longevity Risk and Natural Hedge Potential in Portfolios Of Life Insurance Products : The Effect of Investment Risk

    NARCIS (Netherlands)

    Stevens, R.S.P.; De Waegenaere, A.M.B.; Melenberg, B.

    2011-01-01

    Payments of life insurance products depend on the uncertain future evolution of survival probabilities. This uncertainty is referred to as longevity risk. Existing literature shows that the effect of longevity risk on single life annuities can be substantial, and that there exists a (natural) hedge

  1. Quantification of the impact of endometriosis symptoms on health-related quality of life and work productivity.

    Science.gov (United States)

    Fourquet, Jessica; Báez, Lorna; Figueroa, Michelle; Iriarte, R Iván; Flores, Idhaliz

    2011-07-01

    To quantify the impact of endometriosis-related symptoms on physical and mental health status, health-related quality of life, and work-related aspects (absenteeism, presenteeism, work productivity, and activity impairment). Cross-sectional quantitative study. Academic and research institution. Women (n = 193) with self-reported surgically diagnosed endometriosis from the Endometriosis Patient Registry at Ponce School of Medicine and Health Sciences (PSMHS). Anonymous questionnaire divided into three sections consisting of questions from the Patient Health Survey (SF-12), the Endometriosis Health Profile (EHP-5), and the Work Productivity and Activity Impairment Survey (WPAI). Quantification of impact of endometriosis symptoms on physical and mental health status, health-related quality of life, absenteeism, presenteeism, work productivity, and activity impairment. Patients had SF-12 scores denoting statistically significant disability in the physical and mental health components. They also reported an average of 7.41 hours (approximately one working day) of work time lost during the week when the symptoms are worse. In addition, the WPAI scores showed a high impact on work-related domains: 13% of average loss in work time (absenteeism), 65% of work impaired (presenteeism), 64% of loss in efficiency levels (work productivity loss), and 60% of daily activities perturbed (activity impairment). Endometriosis symptoms such as chronic, incapacitating pelvic pain and infertility negatively and substantially impact the physical and mental health status, health-related quality of life, and productivity at work of women. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  2. Life cycle management in product development

    DEFF Research Database (Denmark)

    Skelton, Kristen; Pattis, Anna

    2013-01-01

    The integration of Life Cycle Thinking (LCT) and Life Cycle Management (LCM) into business operations poses great challenges, as it requires a wider range of environmental responsibility often extending beyond a company's immediate control. Simultaneously, it offers many opportunities...

  3. Increased volume of distribution for recombinant activated factor VII and longer plasma-derived factor VII half-life may explain their long lasting prophylactic effect.

    Science.gov (United States)

    Mathijssen, Natascha C J; Masereeuw, Rosalinde; Holme, Pal Andre; van Kraaij, Marian G J; Laros-van Gorkom, Britta A P; Peyvandi, Flora; van Heerde, Waander L

    2013-08-01

    Prophylaxis with plasma-derived or recombinant activated factor VII is beneficial in severe factor VII deficiency. To understand why prophylactic treatment with both products is efficacious, we conducted a pharmacokinetic study. Ten factor VII deficient patients were treated with either recombinant activated (20 μg/kg) or plasma-derived (25 IU/kg) factor VII in a cross-over design. Pharmacokinetic parameters were analyzed through activated factor VII activity, factor VII clotting activity, and factor VII antigen levels on depicted time points. Factor VII activity half-lifes, determined by non-compartmental and one-compartmental analysis (results in brackets), were shorter for recombinant activated (1.4h; 0.7h) than for plasma-derived factor VII (6.8h; 3.2h); both recombinant activated (5.1h; 2.1h and plasma-derived factor VII (5.8h; 3.2h) resulted in longer half-lives of factor VII antigen. Activated factor VII half-lives (based on activated factor VII activity levels) were significantly higher compared to factor VII clotting activity (1.6h; 0.9h). Volumes of distribution were significantly higher for activated factor VII (236 ml/kg; 175 ml/kg, measured by activated factor VII) as compared to plasma-derived factor VII (206 ml/kg; 64 ml/kg, measured by factor FVII activity), suggesting a plasma- and extracellular fluid distribution for recombinant activated factor VII. Recombinant activated factor VII showed significantly shorter half-lifes than plasma-derived factor VII. Volumes of distribution were significantly higher for treatment with recombinant activated factor VII. The longer half-life for plasma-derived factor VII, compared to recombinant activated factor VII, and the increased volume of distribution for recombinant activated factor VII, compared to plasma-derived factor VII may further elucidate the beneficial effect of prophylactic treatment of both products. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. How Small Businesses Market Their Products during the Different Phases of the Product Life Cycle: The Case of Swedish Ice Cream Manufacturers

    Directory of Open Access Journals (Sweden)

    Annika Hallberg

    2014-05-01

    Full Text Available The Swedish ice cream market of today is dominated by a few major market leaders, which makes it a challenge for small firms to make themselves visible and survive on a long-term basis. The aim of this article is to investigate and understand how small firms in the ice cream business market their products, based on the marketing mix and the portfolio matrix, during the different phases of the product life cycle. The combination of the two models for strategic planning enables the marketing manager to conduct a more complete analysis of existing products and their place on the market and in the product life cycle. Eight CEOs of small-scale ice cream companies were interviewed. This study found that the marketing activities and strategies of large companies cannot be transferred to and implemented in small-scale businesses. Different marketing theories are developed for big businesses that have many employees and expert knowledge, which small companies do not possess. They also have less resources and knowledge to invest in expensive marketing activities in the marketing mix, and therefore the marketing mix models need to incorporate more of inexpensive marketing.

  5. Application of preference selection index method for decision making over the design stage of production system life cycle

    Directory of Open Access Journals (Sweden)

    Rajesh Attri

    2015-07-01

    Full Text Available The life cycle of production system shows the progress of production system from the inception to the termination of the system. During each stage, mainly in the design stage, certain strategic decisions have to be taken. These decisions are more complex as the decision makers have to assess a wide range of alternatives based on a set of conflicting criteria. As the decision making process is found to be unstructured, characterized by domain dependent knowledge, there is a need to apply an efficient multi-criteria decision making (MCDM tool to help the decision makers in making correct decisions. This paper explores the application of a novel MCDM method i.e. Preference selection index (PSI method to solve various decision-making problems that are generally encountered in the design stage of production system life cycle. To prove the potentiality, applicability and accuracy of PSI method in solving decision making problem during the design stage of production system life cycle, five examples are cited from the literature and are compared with the results obtained by the past researchers.

  6. Real-World Analysis of Dispensed IUs of Coagulation Factor IX and Resultant Expenditures in Hemophilia B Patients Receiving Standard Half-life Versus Extended Half-life Products and Those Switching from Standard Half-life to Extended Half-life Products.

    Science.gov (United States)

    Tortella, Bartholomew J; Alvir, José; McDonald, Margaret; Spurden, Dean; Fogarty, Patrick F; Chhabra, Amit; Pleil, Andreas M

    2018-01-24

    Hemophilia B requires replacement therapy with factor IX (FIX) coagulation products to treat and prevent bleeding episodes. A recently introduced extended half-life (EHL) recombinant FIX replacement product provided the opportunity to compare the amount of dispensed factor and expenditures for EHL treatment compared with a standard half-life (SHL) product. To determine factor international units (IUs) dispensed and expenditures associated with switching from nonacog alfa, the most commonly used SHL replacement product, to eftrenonacog alfa, an EHL FIX replacement product. Two U.S. claims databases were analyzed. A large national specialty pharmacy dispensation claims database was used to identify the number of IUs dispensed and monthly charges for all patients with hemophilia B from April 2015 to June 2016. Truven Health MarketScan Research Databases (January 2010-July 2016) were used to identify IUs and expenditures for patients with claims data for at least 3 months before and after switching from the SHL to the EHL product. Medians for IUs and expenditures are presented to accommodate for skewness of data distribution. The national specialty pharmacy database analysis included 296 patients with moderate or severe hemophilia B (233 on SHL; 94 on EHL). Median monthly factor dispensed was 11% lower (2,142 IU) in the EHL versus SHL cohort over the study period, while individual monthly reductions ranged from 32% to 47% (9,838 IU to 16,514 IU). Using the wholesale acquisition cost, the median per-patient monthly factor expenditures over the 15-month study period were 94% higher ($23,005) for the EHL than for the SHL product. Individual median monthly expenditure differences ranged from 15% ($6,562) to 49% ($19,624). In the Truven database, 14 patients switched from the SHL to the EHL product. The amount of factor dispensed was variable; in the 1-year period before and after the switch from the SHL to the EHL product, mean IUs dispensed decreased by 3,005 IU, while

  7. Life cycle inventory of oil palm lumber production: A gate-to-gate case study

    Science.gov (United States)

    Shamsudin, Noor Ainna; Sahid, Ismail; Mokhtar, Anis; Muhamad, Halimah; Ahmad, Shamim

    2018-04-01

    Life Cycle Assessment (LCA) has been applied in the Malaysian oil palm industry since 2010. It is important to ensure that this main industry is ready to meet the demands and expectations of European market on the environmental performance of the oil palm industry. In addition, oil palm biomass, especially oil palm trunk (OPT) are abundantly available after replanting every year. In order to maximize the usage of OPT as a green product, it can be converted to palm lumber as a value-added product. Palm lumber act as a basis product from OPT before it is converted to panel product such as plywood, sandwich board and so on. However, the LCA study on palm lumber production is still scarce in Malaysia. Hence, this paper aims to perform and collect the inventory data for palm lumber production, which is known as Life Cycle Inventory (LCI). A gate-to-gate system boundary and the functional unit of 1 m3 of palm lumber produced have been used in this study. This inventory data was collected from three batches of the production cycle. The inputs are mainly the raw materials which are the OPT and the energy from diesel and electricity from the grid. Generally, each consumption of input such as energy and fossil fuel were different at each stage of palm lumber production. Kiln-drying represents a prominent stage in terms of energy consumption, which electrical use in the dryer represents 94% of total electrical grid consumption as compared to another stage of palm lumber production. By adding the inventory information especially in the downstream sector of biomass industry, hopefully it can improve the sustainability of oil palm industry in Malaysia.

  8. Combinatorial life cycle assessment to inform process design of industrial production of algal biodiesel.

    Science.gov (United States)

    Brentner, Laura B; Eckelman, Matthew J; Zimmerman, Julie B

    2011-08-15

    The use of algae as a feedstock for biodiesel production is a rapidly growing industry, in the United States and globally. A life cycle assessment (LCA) is presented that compares various methods, either proposed or under development, for algal biodiesel to inform the most promising pathways for sustainable full-scale production. For this analysis, the system is divided into five distinct process steps: (1) microalgae cultivation, (2) harvesting and/or dewatering, (3) lipid extraction, (4) conversion (transesterification) into biodiesel, and (5) byproduct management. A number of technology options are considered for each process step and various technology combinations are assessed for their life cycle environmental impacts. The optimal option for each process step is selected yielding a best case scenario, comprised of a flat panel enclosed photobioreactor and direct transesterification of algal cells with supercritical methanol. For a functional unit of 10 GJ biodiesel, the best case production system yields a cumulative energy demand savings of more than 65 GJ, reduces water consumption by 585 m(3) and decreases greenhouse gas emissions by 86% compared to a base case scenario typical of early industrial practices, highlighting the importance of technological innovation in algae processing and providing guidance on promising production pathways.

  9. How Many Environmental Impact Indicators Are Needed in the Evaluation of Product Life Cycles?

    Science.gov (United States)

    Steinmann, Zoran J N; Schipper, Aafke M; Hauck, Mara; Huijbregts, Mark A J

    2016-04-05

    Numerous indicators are currently available for environmental impact assessments, especially in the field of Life Cycle Impact Assessment (LCIA). Because decision-making on the basis of hundreds of indicators simultaneously is unfeasible, a nonredundant key set of indicators representative of the overall environmental impact is needed. We aimed to find such a nonredundant set of indicators based on their mutual correlations. We have used Principal Component Analysis (PCA) in combination with an optimization algorithm to find an optimal set of indicators out of 135 impact indicators calculated for 976 products from the ecoinvent database. The first four principal components covered 92% of the variance in product rankings, showing the potential for indicator reduction. The same amount of variance (92%) could be covered by a minimal set of six indicators, related to climate change, ozone depletion, the combined effects of acidification and eutrophication, terrestrial ecotoxicity, marine ecotoxicity, and land use. In comparison, four commonly used resource footprints (energy, water, land, materials) together accounted for 84% of the variance in product rankings. We conclude that the plethora of environmental indicators can be reduced to a small key set, representing the major part of the variation in environmental impacts between product life cycles.

  10. Clinical status, quality of life, and work productivity in Crohn's disease patients after one year of treatment with adalimumab.

    Science.gov (United States)

    Saro, Cristina; Ceballos, Daniel; Muñoz, Fernando; de la Coba, Cristóbal; Aguilar, María Dolores; Lázaro, Pablo; García-Sánchez, Valle; Hernández, Mariola; Barrio, Jesús; de Francisco, Ruth; Fernández, Luis I; Barreiro-de Acosta, Manuel

    2017-02-01

    Clinical trials have shown the efficacy of adalimumab in Crohn's disease, but the outcome in regular practice remains unknown. The aim of the study was to examine clinical status, quality of life, and work productivity of Crohn's disease patients receiving adalimumab for one year in the context of usual clinical practice. This was a prospective, observational study with a one-year follow-up. After baseline, Crohn's disease patients were evaluated at 1, 3, 6, 9, and 12 months after starting treatment with adalimumab. Outcome variables included: clinical status (measured with CDAI), quality of life (measured with EuroQoL-5D and IBDQ), and work productivity (measured with WPAI questionnaire). These outcome variables were compared using the Student's t test or Wilcoxon test for paired comparison data according to the data distribution. Statistical significance was set at two-sided p work productivity impact decreased from 53% to 24% (p quality of life and work productivity.

  11. The sustainability effects of Product/Service-System design validated through Life Cycle Assessment

    DEFF Research Database (Denmark)

    Smidt Dreijer, Leise; Birkved, Morten; Howard, Thomas J.

    2013-01-01

    and lifts. The major research question for the case is how the supplier’s continued ownership of the building materials influences the sustainability of such buildings. By using a PSS design approach in the early design stages, the architects involved in the case project were able to make design decisions......Temporary buildings are generally considered to be unsustainable due to a short life span of the materials applied in the building. The construction materials typically have a longer use life than the required use life of the building, thus functioning building materials are often discarded after...... the demolition. In an attempt to improve the sustainability of temporary buildings, a Product/Service-System (PSS) strategy is here applied to a case project. The case project concerns a temporary building made of leased materials and building components such as shipping containers, scaffolding materials...

  12. Impact of gastroesophageal reflux disease on work absenteeism, presenteeism and productivity in daily life: a European observational study.

    Science.gov (United States)

    Gisbert, Javier P; Cooper, Alun; Karagiannis, Dimitrios; Hatlebakk, Jan; Agréus, Lars; Jablonowski, Helmut; Nuevo, Javier

    2009-10-16

    The RANGE (Retrospective ANalysis of GastroEsophageal reflux disease [GERD]) study assessed differences among patients consulting a primary care physician due to GERD-related reasons in terms of: symptoms, diagnosis and management, response to treatment, and effects on productivity, costs and health-related quality of life. This subanalysis of RANGE determined the impact of GERD on productivity in work and daily life. RANGE was conducted at 134 primary care sites across six European countries (Germany, Greece, Norway, Spain, Sweden and the UK). All subjects (aged >or=18 years) who consulted with their primary care physician over a 4-month identification period were screened retrospectively, and those consulting at least once for GERD-related reasons were identified (index visit). From this population, a random sample was selected to enter the study and attended a follow-up appointment, during which the impact of GERD on productivity while working (absenteeism and presenteeism) and in daily life was evaluated using the self-reported Work Productivity and Activity Impairment Questionnaire for patients with GERD (WPAI-GERD). Overall, 373,610 subjects consulted with their primary care physician over the 4-month identification period, 12,815 for GERD-related reasons (3.4%); 2678 randomly selected patients attended the follow-up appointment. Average absenteeism due to GERD was highest in Germany (3.2 hours/week) and lowest in the UK (0.4 hours/week), with an average of up to 6.7 additional hours/week lost due to presenteeism in Norway. The average monetary impact of GERD-related work absenteeism and presenteeism were substantial in all countries (from euro55/week per employed patient in the UK to euro273/patient in Sweden). Reductions in productivity in daily life of up to 26% were observed across the European countries. GERD places a significant burden on primary care patients, in terms of work absenteeism and presenteeism and in daily life. The resulting costs to the

  13. Life cycle analysis for bioethanol production from sugar beet crops in Greece

    Energy Technology Data Exchange (ETDEWEB)

    Foteinis, Spyros; Kouloumpis, Victor [Department of Environmental Engineering, Technical University of Crete, GR 73100 Chania (Greece); Tsoutsos, Theocharis, E-mail: theocharis.tsoutsos@enveng.tuc.gr [Department of Environmental Engineering, Technical University of Crete, GR 73100 Chania (Greece)

    2011-09-15

    The main aim of this study is to evaluate whether the potential transformation of the existing sugar plants of Northern Greece to modern bioethanol plants, using the existing cultivations of sugar beet, would be an environmentally sustainable decision. Using Life Cycle Inventory and Impact Assessment, all processes for bioethanol production from sugar beets were analyzed, quantitative data were collected and the environmental loads of the final product (bioethanol) and of each process were estimated. The final results of the environmental impact assessment are encouraging since bioethanol production gives better results than sugar production for the use of the same quantity of sugar beets. If the old sugar plants were transformed into modern bioethanol plants, the total reduction of the environmental load would be, at least, 32.6% and a reduction of more than 2 tons of CO{sub 2}e/sugar beet of ha cultivation could be reached. Moreover bioethanol production was compared to conventional fuel (gasoline), as well as to other types of biofuels (biodiesel from Greek cultivations). - Highlights: > Bioethanol production gives better results than sugar production from sugar beets. > In most cases, sugar beets, as an already industrialized plant has organizational virtues. > Bioethanol could be a sustainable independent way of energy production, alternative to biodiesel.

  14. Similarities and differences among fluid milk products: traditionally produced, extended shelf life and ultrahigh-temperature processed.

    Science.gov (United States)

    Grabowski, N T; Ahlfeld, B; Brix, A; Hagemann, A; von Münchhausen, C; Klein, G

    2013-06-01

    Extended shelf life milk is a relatively new kind of fluid milk, generally manufactured by high-temperature treatment and/or micro-filtration. Being advertised as 'pasteurized milk with an extended shelf life', its flavour, compositional quality and labelling was questioned. Extended shelf life (high-temperature treatment), pasteurized ('traditionally produced') and ultrahigh-temperature milk were, therefore, compared at the beginning and end of shelf life. In triangle tests, panellists distinguished clearly between all products. High-temperature treatment milk's flavour was closer to ultrahigh-temperature and traditionally produced milk in the beginning and at the end of shelf life, respectively. Physicochemically and bacteriologically, all three types could be distinguished. Since 'extended shelf life' comprises many process varieties (each affecting flavour differently), consumer information and appropriate package labelling beyond 'long-lasting' is necessary, e.g. by mentioning the heat treatment applied.

  15. Safeguard assessment for life extension in nuclear power plants (NPPs) using a production function

    International Nuclear Information System (INIS)

    Woo, Tae-Ho; Lee, Un-Chul

    2011-01-01

    Research highlights: → The numerical value is constructed for the secure operation. → As the power increases, the NSEF increases. → Specific month could be indicated by the relative value of NSEF. → It is suggested for the better power in NPPs. → There is another possibility for the secure operation factors. - Abstract: Life extension is investigated as a safeguard assessment for the stability on the operation of the nuclear power plants (NPPs). The Cobb-Douglas function, one of the production functions, is modified for the nuclear safeguard in NPPs, which was developed for the life quality of the social and natural objects. Nuclear Safeguard Estimator Function (NSEF) is developed for the application in NPPs. The cases of NPPs are compared with each other in the aspect of the secure performance. The results are obtained by the standard productivity comparisons with the designed power operations. The range of secure life extension is between 1.008 and 5.353 in 2000 MW e and the range is between 0.302 and 0.994 in 600 MW e . So, the successfulness of the power operation increases about 5 times higher than that of the interested power in this study, which means that the safeguard assessment has been performed in the life extension of the NPPs. The technology assessment (TA) is suggested for the safe operation which is an advanced method comparing conventional probabilistic safety assessment (PSA).

  16. Wear Fast, Die Young: More Worn Teeth and Shorter Lives in Iberian Compared to Scottish Red Deer.

    Science.gov (United States)

    Pérez-Barbería, F J; Carranza, J; Sánchez-Prieto, C

    2015-01-01

    Teeth in Cervidae are permanent structures that are not replaceable or repairable; consequently their rate of wear, due to the grinding effect of food and dental attrition, affects their duration and can determine an animal's lifespan. Tooth wear is also a useful indicator of accumulative life energy investment in intake and mastication and their interactions with diet. Little is known regarding how natural and sexual selection operate on dental structures within a species in contrasting environments and how these relate to life history traits to explain differences in population rates of tooth wear and longevity. We hypothesised that populations under harsh environmental conditions should be selected for more hypsodont teeth while sexual selection may maintain similar sex differences within different populations. We investigated the patterns of tooth wear in males and females of Iberian red deer (Cervus elaphus hispanicus) in Southern Spain and Scottish red deer (C. e. scoticus) across Scotland, that occur in very different environments, using 10343 samples from legal hunting activities. We found higher rates of both incisor and molar wear in the Spanish compared to Scottish populations. However, Scottish red deer had larger incisors at emergence than Iberian red deer, whilst molars emerged at a similar size in both populations and sexes. Iberian and Scottish males had earlier tooth depletion than females, in support of a similar sexual selection process in both populations. However, whilst average lifespan for Iberian males was 4 years shorter than that for Iberian females and Scottish males, Scottish males only showed a reduction of 1 year in average lifespan with respect to Scottish females. More worn molars were associated with larger mandibles in both populations, suggesting that higher intake and/or greater investment in food comminution may have favoured increased body growth, before later loss of tooth efficiency due to severe wear. These results

  17. Applicability of the shorter ‘Bangladesh regimen’ in high multidrug-resistant tuberculosis settings

    Directory of Open Access Journals (Sweden)

    Giovanni Sotgiu

    2017-03-01

    Full Text Available In spite of the recent introduction of two new drugs (delamanid and bedaquiline and a few repurposed compounds to treat multidrug-resistant and extensively drug-resistant tuberculosis (MDR- and XDR-TB, clinicians are facing increasing problems in designing effective regimens in severe cases. Recently a 9 to 12-month regimen (known as the ‘Bangladesh regimen’ proved to be effective in treating MDR-TB cases. It included an initial phase of 4 to 6 months of kanamycin, moxifloxacin, prothionamide, clofazimine, pyrazinamide, high-dose isoniazid, and ethambutol, followed by 5 months of moxifloxacin, clofazimine, pyrazinamide, and ethambutol. However, recent evidence from Europe and Latin America identified prevalences of resistance to the first-line drugs in this regimen (ethambutol and pyrazinamide exceeding 60%, and of prothionamide exceeding 50%. Furthermore, the proportions of resistance to the two most important pillars of the regimen – quinolones and kanamycin – were higher than 40%. Overall, only 14 out of 348 adult patients (4.0% were susceptible to all of the drugs composing the regimen, and were therefore potentially suitable for the ‘shorter regimen’. A shorter, cheaper, and well-tolerated MDR-TB regimen is likely to impact the number of patients treated and improve adherence if prescribed to the right patients through the systematic use of rapid MTBDRsl testing.

  18. Life cycle assessment of cellulose nanofibrils production by mechanical treatment and two different pretreatment processes.

    Science.gov (United States)

    Arvidsson, Rickard; Nguyen, Duong; Svanström, Magdalena

    2015-06-02

    Nanocellulose is a bionanomaterial with many promising applications, but high energy use in production has been described as a potential obstacle for future use. In fact, life cycle assessment studies have indicated high life cycle energy use for nanocellulose. In this study, we assess the cradle-to-gate environmental impacts of three production routes for a particular type of nanocellulose called cellulose nanofibrils (CNF) made from wood pulp. The three production routes are (1) the enzymatic production route, which includes an enzymatic pretreatment, (2) the carboxymethylation route, which includes a carboxymethylation pretreatment, and (3) one route without pretreatment, here called the no pretreatment route. The results show that CNF produced via the carboxymethylation route clearly has the highest environmental impacts due to large use of solvents made from crude oil. The enzymatic and no pretreatment routes both have lower environmental impacts, of similar magnitude. A sensitivity analysis showed that the no pretreatment route was sensitive to the electricity mix, and the carboxymethylation route to solvent recovery. When comparing the results to those of other carbon nanomaterials, it was shown that in particular CNF produced via the enzymatic and no pretreatment routes had comparatively low environmental impacts.

  19. Non-equilibrium Thermodynamics and the Production of Entropy Life, Earth, and Beyond

    CERN Document Server

    Kleidon, Axel

    2005-01-01

    The present volume studies the application of concepts from non-equilibrium thermodynamics to a variety of research topics. Emphasis is on the Maximum Entropy Production (MEP) principle and applications to Geosphere-Biosphere couplings. Written by leading researchers form a wide range of background, the book proposed to give a first coherent account of an emerging field at the interface of thermodynamics, geophysics and life sciences.

  20. Job-Sharing: An Answer to Productivity Problems?

    Science.gov (United States)

    Frease, Michael; Zawacki, Robert A.

    1979-01-01

    Proponents stress the increased productivity that results for job sharers' ability to work harder for shorter periods of time. Opponents stress the increased expenses, such as fringe benefits, that result. The issue, then, is whether increased productivity outweighs increased expenses. (Author/IRT)

  1. Sensitivity analysis in a life cycle assessment of an aged red wine production from Catalonia, Spain

    Energy Technology Data Exchange (ETDEWEB)

    Meneses, M., E-mail: montse.meneses@uab.cat [Universitat Autònoma de Barcelona, Systems Engineering and Telecomunication Department, ESE, 08193 Bellaterra (Spain); Torres, C.M.; Castells, F. [Universitat Rovira i Virgili, Departament d' Enginyeria Química, Environmental Analysis and Management Group, AGA, Av. Paisos Catalans 26, 43007 Tarragona (Spain)

    2016-08-15

    Sustainability in agriculture and food processing is an issue with a clear growing interest; especially in products were consumers have particular awareness regarding its environmental profile. This is the case of wine industry depending on grape production, winemaking and bottling. Also viticulture and generally agricultural production is significantly affected by climate variations. The aim of this article is to determine the environmental load of an aged red wine from a winery in Catalonia, Spain, over its entire life cycle, including sensitivity analysis of the main parameters related to the cultivation, vinification and bottling. The life cycle assessment (LCA) methodology is used for the environmental analysis. In a first step, life cycle inventory (LCI) data were collected by questionnaires and interviews with the winemaker, all data are actual operating data and all the stages involved in the production have been taken into account (viticulture, vinification, bottling and the disposal subsystem). Data were then used to determine the environmental profile by a life cycle impact assessment using the ReCiPe method. Annual variability in environmental performance, stresses the importance of including timeline analysis in the wine sector. Because of that this study is accompanied with a sensitivity analysis carried out by a Monte Carlo simulation that takes into account the uncertainty and variability of the parameters used. In this manner, the results are presented with confidence intervals to provide a wider view of the environmental issues derived from the activities of the studied wine estate regardless of the eventualities of a specific harvesting year. Since the beverage packaging has an important influence in this case, a dataset for the production of green glass was adapted to reflect the actual recycling situation in Spain. Furthermore, a hypothetical variation of the glass-recycling rate in the glass production completes this article, as a key variable

  2. Sensitivity analysis in a life cycle assessment of an aged red wine production from Catalonia, Spain

    International Nuclear Information System (INIS)

    Meneses, M.; Torres, C.M.; Castells, F.

    2016-01-01

    Sustainability in agriculture and food processing is an issue with a clear growing interest; especially in products were consumers have particular awareness regarding its environmental profile. This is the case of wine industry depending on grape production, winemaking and bottling. Also viticulture and generally agricultural production is significantly affected by climate variations. The aim of this article is to determine the environmental load of an aged red wine from a winery in Catalonia, Spain, over its entire life cycle, including sensitivity analysis of the main parameters related to the cultivation, vinification and bottling. The life cycle assessment (LCA) methodology is used for the environmental analysis. In a first step, life cycle inventory (LCI) data were collected by questionnaires and interviews with the winemaker, all data are actual operating data and all the stages involved in the production have been taken into account (viticulture, vinification, bottling and the disposal subsystem). Data were then used to determine the environmental profile by a life cycle impact assessment using the ReCiPe method. Annual variability in environmental performance, stresses the importance of including timeline analysis in the wine sector. Because of that this study is accompanied with a sensitivity analysis carried out by a Monte Carlo simulation that takes into account the uncertainty and variability of the parameters used. In this manner, the results are presented with confidence intervals to provide a wider view of the environmental issues derived from the activities of the studied wine estate regardless of the eventualities of a specific harvesting year. Since the beverage packaging has an important influence in this case, a dataset for the production of green glass was adapted to reflect the actual recycling situation in Spain. Furthermore, a hypothetical variation of the glass-recycling rate in the glass production completes this article, as a key variable

  3. Uncertainty quantification metrics for whole product life cycle cost estimates in aerospace innovation

    Science.gov (United States)

    Schwabe, O.; Shehab, E.; Erkoyuncu, J.

    2015-08-01

    The lack of defensible methods for quantifying cost estimate uncertainty over the whole product life cycle of aerospace innovations such as propulsion systems or airframes poses a significant challenge to the creation of accurate and defensible cost estimates. Based on the axiomatic definition of uncertainty as the actual prediction error of the cost estimate, this paper provides a comprehensive overview of metrics used for the uncertainty quantification of cost estimates based on a literature review, an evaluation of publicly funded projects such as part of the CORDIS or Horizon 2020 programs, and an analysis of established approaches used by organizations such NASA, the U.S. Department of Defence, the ESA, and various commercial companies. The metrics are categorized based on their foundational character (foundations), their use in practice (state-of-practice), their availability for practice (state-of-art) and those suggested for future exploration (state-of-future). Insights gained were that a variety of uncertainty quantification metrics exist whose suitability depends on the volatility of available relevant information, as defined by technical and cost readiness level, and the number of whole product life cycle phases the estimate is intended to be valid for. Information volatility and number of whole product life cycle phases can hereby be considered as defining multi-dimensional probability fields admitting various uncertainty quantification metric families with identifiable thresholds for transitioning between them. The key research gaps identified were the lacking guidance grounded in theory for the selection of uncertainty quantification metrics and lacking practical alternatives to metrics based on the Central Limit Theorem. An innovative uncertainty quantification framework consisting of; a set-theory based typology, a data library, a classification system, and a corresponding input-output model are put forward to address this research gap as the basis

  4. Life Cycle Assessment of Coal-fired Power Production

    Energy Technology Data Exchange (ETDEWEB)

    Spath, P. L.; Mann, M. K.; Kerr, D. R.

    1999-09-01

    Coal has the largest share of utility power generation in the US, accounting for approximately 56% of all utility-produced electricity (US DOE, 1998). Therefore, understanding the environmental implications of producing electricity from coal is an important component of any plan to reduce total emissions and resource consumption. A life cycle assessment (LCA) on the production of electricity from coal was performed in order to examine the environmental aspects of current and future pulverized coal boiler systems. Three systems were examined: (1) a plant that represents the average emissions and efficiency of currently operating coal-fired power plants in the US (this tells us about the status quo), (2) a new coal-fired power plant that meets the New Source Performance Standards (NSPS), and (3) a highly advanced coal-fired power plant utilizing a low emission boiler system (LEBS).

  5. Shelf life characteristics of bread produced from ozonated wheat flour.

    Science.gov (United States)

    Obadi, Mohammed; Zhu, Ke-Xue; Peng, Wei; Sulieman, Abdellatif A; Mahdi, Amer Ali; Mohammed, Khalid; Zhou, Hui-Ming

    2017-11-13

    The objective of this work was to study the effect of ozone treatment on the quality of bread and its shelf life. Flour was treated with ozone gas a rate of 5 L/min for 5, 15, 25, 35, and 45 min. Baking studies showed that bread made from flour treated with ozone for 15 min exhibited improved quality properties (in terms of specific volume, bread color, and crumb cell numbers). Exposure to ozone for shorter times did not cause obvious changes in the major volatile compounds of bread. A shelf life tests showed that ozone gas treatment influenced the extent of starch crystallinity. The relative starch crystallinity of bread made from flour treated with ozone for 15 min was lower than the control value, as were the hardness, springiness, and cohesiveness. Microscopic examination of crumb structure revealed remarkable differences between control and treated breads. Although ozone is a naturally occurring substance found in the atmosphere, ozone can also be produced synthetically. Recently, ozone has come to be regarded as a new treatment for flour. Especially in countries where the chlorination is forbidden, ozone treatment may be of a great interest if it were associated with significant and reliable changes in flour. Ozone treatment of wheat flour tends to improve bread shelf life and quality in terms of physiochemical, baking properties, X-ray diffraction data, volatile compound levels, crumb structure, and textural characteristics. Given such findings, desirable shelf life and bread qualities may be achieved when ozone is used as a flour oxidant prior to bread baking. Analyses of the effects of ozone gas on treatment of flour on bread shelf life and quality would aid the production of high quality and extend the shelf life of bread. © 2017 Wiley Periodicals, Inc.

  6. Life cycle GHG evaluation of organic rice production in northern Thailand.

    Science.gov (United States)

    Yodkhum, Sanwasan; Gheewala, Shabbir H; Sampattagul, Sate

    2017-07-01

    Greenhouse gas (GHG) emission is one of the serious international environmental issues that can lead to severe damages such as climate change, sea level rise, emerging disease and many other impacts. Rice cultivation is associated with emissions of potent GHGs such as methane and nitrous oxide. Thai rice has been massively exported worldwide however the markets are becoming more competitive than ever since the green market has been hugely promoted. In order to maintain the same level or enhance of competitiveness, Thai rice needs to be considered for environmentally conscious products to meet the international environmental standards. Therefore, it is necessary to evaluate the greenhouse gas emissions throughout the life cycle of rice production in order to identify the major emission sources and possible reduction strategies. In this research, the rice variety considered is Khao Dawk Mali 105 (KDML 105) cultivated by organic practices. The data sources were Don-Chiang Organic Agricultural Cooperative (DCOAC), Mae-teang district, Chiang Mai province, Thailand and the Office of Agricultural Economics (OAE) of Thailand with onsite records and interviews of farmers in 2013. The GHG emissions were calculated from cradle-to-farm by using the Life Cycle Assessment (LCA) approach and the 2006 IPCC Guideline for National Greenhouse Gas Inventories. The functional unit is defined as 1 kg of paddy rice at farm gate. Results showed that the total GHG emissions of organic rice production were 0.58 kg CO 2 -eq per kg of paddy rice. The major source of GHG emission was from the field emissions accounting for 0.48 kg CO 2 -eq per kg of paddy rice, about 83% of total, followed by land preparation, harvesting and other stages (planting, cultivation and transport of raw materials) were 9, 5 and 3% of total, respectively. The comparative results clearly showed that the GHG emissions of organic paddy rice were considerably lower than conventional rice production due to the

  7. Global guidance on environmental life cycle impact assessment indicators: impacts of climate change, fine particulate matter formation, water consumption and land use

    DEFF Research Database (Denmark)

    Jolliet, Olivier; Antón, Assumpció; Boulay, Anne-Marie

    2018-01-01

    of water consumption on human health assesses the DALYs from malnutrition caused by lack of water for irrigated food production. Land use impacts: CFs representing global potential species loss from land use are proposed as interim recommendation suitable to assess biodiversity loss due to land use......Purpose: Guidance is needed on best-suited indicators to quantify and monitor the man-made impacts on human health, biodiversity and resources. Therefore, the UNEP-SETAC Life Cycle Initiative initiated a global consensus process to agree on an updated overall life cycle impact assessment (LCIA...... are recommended: (a) The global warming potential 100 years (GWP 100) represents shorter term impacts associated with rate of change and adaptation capacity, and (b) the global temperature change potential 100 years (GTP 100) characterizes the century-scale long term impacts, both including climate-carbon cycle...

  8. Model for cradle-to-gate life cycle assessment of clinker production

    Energy Technology Data Exchange (ETDEWEB)

    Michael Elias Boesch; Annette Koehler; Stefanie Hellweg [ETH Zurich, Zurich (Switzerland). Institute of Environmental Engineering

    2009-10-01

    A model for input- and technology-dependent cradle-to-gate life cycle assessments (LCA) was constructed to quantify emissions and resource consumption of various clinker production options. The model was compiled using data of more than 100 clinker production lines and complemented with literature data and best judgment from experts. It can be applied by the cement industry for the selection of alternative fuels and raw materials (AFR) and by authorities for decision-support regarding the permission of waste co-processing in cement kilns. In the field of sustainable construction, the model can be used to compare clinker production options. Two case studies are presented. First, co-processing of four different types of waste is analyzed at a modern precalciner kiln system. Second, clinker production is compared between five kiln systems. Results show that the use of waste (tires, prepared industrial waste, dried sewage sludge, blast furnace slag) led to reduced greenhouse gas emissions, decreased resource consumption, and mostly to reduced aggregated environmental impacts. Regarding the different kiln systems, the environmental impact generally increased with decreasing energy efficiency. 35 refs., 2 figs., 2 tabs.

  9. Disease activity, quality of life and indirect costs of reduced productivity at work, generated by Polish patients with ankylosing spondylitis

    Directory of Open Access Journals (Sweden)

    Paweł Kawalec

    2016-02-01

    Full Text Available Objectives: The aim of the study was to investigate the association between activity of ankylosing spondylitis (AS and decrease in quality of life as well as productivity loss of affected patients in a specified group of patients in the Polish setting. Material and methods : An questionnaire survey was conducted using the Bath Ankylosing Spondylitis Disease Activity Index (BASDAI to assess disease activity, as well as the Work Productivity and Activity Impairment Questionnaires to assess productivity loss; quality of life was presented as utility calculated using the EuroQol 5 questionnaire and also measured on a visual analogue scale (VAS. Indirect costs were assessed with the human capital approach implying gross domestic product per capita or gross value added per worker in Poland in 2014 and were expressed in Polish zlotys (PLN as well as in euros. Correlation was presented using Spearman’s rank correlation coefficient. Results : We performed our analysis based on 78 full questionnaires collected. A mean BASDAI score of 5.91 in the analysed group of patients was detected and mean utility of 0.5135 was observed. Average quality of life measured on the visual analogue scale was 46.55. Mean number of days off work was 45.26 days per year and mean on-the-job productivity loss was 49.29%. Average annual indirect costs per patient were €4241 (17 686 PLN calculated using gross domestic product and €10 172 (42 417 PLN estimated using gross value added. Total productivity loss was significantly correlated with disease activity (strong correlation of 0.6005 and utility (moderate correlation of –0.3698. Conclusions : Ankylosing spondylitis causes a great decrease in quality of life as well as patients’ productivity loss associated with both absenteeism and presenteeism. The greater the disease activity is, the lower is the utility, the lower is the quality of life measured on the VAS, and the greater are the total annual indirect costs. Total

  10. Social Life Cycle Approach as a Tool for Promoting the Market Uptake of Bio-Based Products from a Consumer Perspective

    Directory of Open Access Journals (Sweden)

    Pasquale Marcello Falcone

    2018-03-01

    Full Text Available The sustainability of bio-based products, especially when compared with fossil based products, must be assured. The life cycle approach has proven to be a promising way to analyze the social, economic and environmental impacts of bio-based products along the whole value chain. Until now, however, the social aspects have been under-investigated in comparison to environmental and economic aspects. In this context, the present paper aims to identify the main social impact categories and indicators that should be included in a social sustainability assessment of bio-based products, with a focus on the consumers’ category. To identify which social categories and indicators are most relevant, we carry out a literature review on existing social life cycle studies; this is followed by a focus group with industrial experts and academics. Afterwards, we conduct semi-structured interviews with some consumer representatives to understand which social indicators pertaining to consumers are perceived as relevant. Our findings highlight the necessity for the development and dissemination of improved frameworks capable of exploiting the consumers’ role in the ongoing process of market uptake of bio-based products. More specifically, this need regards the effective inclusion of some social indicators (i.e., end users’ health and safety, feedback mechanisms, transparency, and end-of-life responsibility in the social life cycle assessment scheme for bio-based products. This would allow consumers, where properly communicated, to make more informed and aware purchasing choices, therefore having a flywheel effect on the market diffusion of a bio-based product.

  11. High lung cancer surgical procedure volume is associated with shorter length of stay and lower risks of re-admission and death

    DEFF Research Database (Denmark)

    Møller, Henrik; Riaz, Sharma P; Holmberg, Lars

    2016-01-01

    It is debated whether treating cancer patients in high-volume surgical centres can lead to improvement in outcomes, such as shorter length of hospital stay, decreased frequency and severity of post-operative complications, decreased re-admission, and decreased mortality. The dataset for this anal......It is debated whether treating cancer patients in high-volume surgical centres can lead to improvement in outcomes, such as shorter length of hospital stay, decreased frequency and severity of post-operative complications, decreased re-admission, and decreased mortality. The dataset...... to their geographical population. Higher volume hospitals had shorter length of stay and the odds of re-admission were 15% lower in the highest hospital volume quintile compared with the lowest quintile. Mortality risks were 1% after 30 d and 3% after 90 d. Patients from hospitals in the highest volume quintile had...

  12. Effect of calf sex on some productive, reproductive and health traits in Holstein cows

    International Nuclear Information System (INIS)

    Chegini, A.; Hossein-Zadeh, N.G.; Hosseini-Moghadam, H.

    2015-01-01

    Records of Holstein cows from March 1992 to April 2008 from 194 large herds and comprising from 402,716 records for productive traits to 178,344 records of somatic cell count were used to study the effect of calf sex in different parities and calving season on the subsequent productive, reproductive and health traits in Holstein cows. T-test procedure of SAS software was used to investigate the effect of calf sex and season of calving on aforementioned traits. Cows with female calves had higher milk and fat yield, persistency of milk and fat yield and longer lactation length, while cows that gave birth to male calves had shorter calving interval and longer productive life. Also, cows with female calves had higher milk yield per day of lactation in the first two parities, but there was no difference in milk yield per day of lactation for parities ≥ 3. There was no relationship among mean somatic cell count and sex of born calf. Fall calves had the highest adjusted milk yield and milk yield per day of lactation, however, winter calves had the longest lactation lengthand productive life and the highest somatic cell count. Results from this study demonstrate that it seems necessary to consider the effect of calf sex on aforementioned traits when making decision to use sexed semen or conventional semen. (Author)

  13. Effect of calf sex on some productive, reproductive and health traits in Holstein cows

    Energy Technology Data Exchange (ETDEWEB)

    Chegini, A.; Hossein-Zadeh, N.G.; Hosseini-Moghadam, H.

    2015-07-01

    Records of Holstein cows from March 1992 to April 2008 from 194 large herds and comprising from 402,716 records for productive traits to 178,344 records of somatic cell count were used to study the effect of calf sex in different parities and calving season on the subsequent productive, reproductive and health traits in Holstein cows. T-test procedure of SAS software was used to investigate the effect of calf sex and season of calving on aforementioned traits. Cows with female calves had higher milk and fat yield, persistency of milk and fat yield and longer lactation length, while cows that gave birth to male calves had shorter calving interval and longer productive life. Also, cows with female calves had higher milk yield per day of lactation in the first two parities, but there was no difference in milk yield per day of lactation for parities ≥ 3. There was no relationship among mean somatic cell count and sex of born calf. Fall calves had the highest adjusted milk yield and milk yield per day of lactation, however, winter calves had the longest lactation lengthand productive life and the highest somatic cell count. Results from this study demonstrate that it seems necessary to consider the effect of calf sex on aforementioned traits when making decision to use sexed semen or conventional semen. (Author)

  14. Life?cycle impacts of ethanol production from spruce wood chips under high-gravity conditions

    OpenAIRE

    Janssen, Matty; Xiros, Charilaos; Tillman, Anne-Marie

    2016-01-01

    Background Development of more sustainable biofuel production processes is ongoing, and technology to run these processes at a high dry matter content, also called high-gravity conditions, is one option. This paper presents the results of a life?cycle assessment (LCA) of such a technology currently in development for the production of bio-ethanol from spruce wood chips. Results The cradle-to-gate LCA used lab results from a set of 30 experiments (or process configurations) in which the main p...

  15. Life cycle assessment (LCA) and exergetic life cycle assessment (ELCA) of the production of biodiesel from used cooking oil (UCO)

    International Nuclear Information System (INIS)

    Talens Peiro, L.; Lombardi, L.; Villalba Mendez, G.; Gabarrell i Durany, X.

    2010-01-01

    The paper assesses the life cycle of biodiesel from used cooking oil (UCO). Such life cycle involves 4 stages: 1) collection, 2) pre-treatment, 3) delivery and 4) transesterification of UCO. Generally, UCO is collected from restaurants, food industries and recycling centres by authorised companies. Then, UCO is pre-treated to remove solid particles and water to increase its quality. After that, it is charged in cistern trucks and delivered to the biodiesel facility to be then transesterified with methanol to biodiesel. The production of 1 ton of biodiesel is evaluated by a Life Cycle Assessment (LCA) to assess the environmental impact and by an Exergetic Life Cycle Assessment (ELCA) to account for the exergy input to the system. A detailed list of material and energy inputs is done using data from local companies and completed using Ecoinvent 1.2 database. The results show that the transesterification stage causes 68% of the total environmental impact. The major exergy inputs are uranium and natural gas. If targets set by the Spanish Renewable Energy Plan are achieved, the exergy input for producing biodiesel would be reduced by 8% in the present system and consequently environmental impacts and exergy input reduced up to 36% in 2010.

  16. Prenatal paracetamol exposure is associated with shorter anogenital distance in male infants

    Science.gov (United States)

    Fisher, B.G.; Thankamony, A.; Hughes, I.A.; Ong, K.K.; Dunger, D.B.; Acerini, C.L.

    2016-01-01

    STUDY QUESTION What is the relationship between maternal paracetamol intake during the masculinisation programming window (MPW, 8–14 weeks of gestation) and male infant anogenital distance (AGD), a biomarker for androgen action during the MPW? SUMMARY ANSWER Intrauterine paracetamol exposure during 8–14 weeks of gestation is associated with shorter AGD from birth to 24 months of age. WHAT IS ALREADY KNOWN The increasing prevalence of male reproductive disorders may reflect environmental influences on foetal testicular development during the MPW. Animal and human xenograft studies have demonstrated that paracetamol reduces foetal testicular testosterone production, consistent with reported epidemiological associations between prenatal paracetamol exposure and cryptorchidism. STUDY DESIGN, SIZE, DURATION Prospective cohort study (Cambridge Baby Growth Study), with recruitment of pregnant women at ~12 post-menstrual weeks of gestation from a single UK maternity unit between 2001 and 2009, and 24 months of infant follow-up. Of 2229 recruited women, 1640 continued with the infancy study after delivery, of whom 676 delivered male infants and completed a medicine consumption questionnaire. PARTICIPANTS/MATERIALS, SETTING, METHOD Mothers self-reported medicine consumption during pregnancy by a questionnaire administered during the perinatal period. Infant AGD (measured from 2006 onwards), penile length and testicular descent were assessed at 0, 3, 12, 18 and 24 months of age, and age-specific Z scores were calculated. Associations between paracetamol intake during three gestational periods (14 weeks) and these outcomes were tested by linear mixed models. Two hundred and twenty-five (33%) of six hundred and eighty-one male infants were exposed to paracetamol during pregnancy, of whom sixty-eight were reported to be exposed during 8–14 weeks. AGD measurements were available for 434 male infants. MAIN RESULTS AND THE ROLE OF CHANCE Paracetamol exposure during 8–14

  17. Combinatorial Life Cycle Assessment to Inform Process Design of Industrial Production of Algal Biodiesel

    NARCIS (Netherlands)

    Brentner, L.B.; Eckelman, M.J.; Zimmerman, J.B.

    2011-01-01

    The use of algae as a feedstock for biodiesel production is a rapidly growing industry, in the United States and globally. A life cycle assessment (LCA) is presented that compares various methods, either proposed or under development, for algal biodiesel to inform the most promising pathways for

  18. Quality, functionality, and shelf life of fermented meat and meat products: A review.

    Science.gov (United States)

    Kumar, Pavan; Chatli, M K; Verma, Akhilesh K; Mehta, Nitin; Malav, O P; Kumar, Devendra; Sharma, Neelesh

    2017-09-02

    Fermentation of meat is a traditional preservation method used widely for improving quality and shelf life of fermented meat products. Fermentation of meat causes a number of physical, biochemical, and microbial changes, which eventually impart functional properties, sensory characteristics, and nutritional aspects to these products and inhibit the growth of various pathogenic and spoilage microorganisms. These changes include acidification (carbohydrate catabolism), solubilization and gelation of myofibrillar and sarcoplasmic proteins of muscle, degradation of proteins and lipids, reduction of nitrate into nitrite, formation of nitrosomyoglobin, and dehydration. Dry-fermented sausages are increasingly being used as carrier of probiotics. The production of biogenic amines during fermentation can be controlled by selecting proper starter cultures and other preventive measures such as quality of raw materials, hygienic measures, temperature, etc.

  19. Life-Cycle Assessment of the Production of Rare-Earth Elements for Energy Applications: A Review

    Energy Technology Data Exchange (ETDEWEB)

    Navarro, Julio [School of Mechanical Engineering, Purdue University, West Lafayette, IN (United States); Zhao, Fu, E-mail: fzhao@purdue.edu [Division of Environmental and Ecological Engineering, School of Mechanical Engineering, Purdue University, West Lafayette, IN (United States)

    2014-11-06

    Rare-earth elements (REEs) are a group of 17 elements with similar chemical properties, including 15 in the lanthanide group, yttrium, and scandium. Due to their unique physical and chemical properties, REEs gain increasing importance in many new energy technologies and systems that contribute to reduce greenhouse gas emissions and fossil fuel depletion (e.g., wind turbine, electric vehicles, high efficiency lighting, batteries, and hydrogen storage). However, it is well known that production of REEs is far from environmentally sustainable as it requires significant material and energy consumption while generating large amounts of air/water emissions and solid waste. Although life-cycle assessment (LCA) has been accepted as the most comprehensive approach to quantify the environmental sustainability of a product or process, to date, there have been only very limited LCA studies on the production of REEs. With the continual growth of renewable energy and energy efficient technologies, global production of REEs will increase. Therefore, reducing environmental footprints of REE production becomes critical and identifying environmental hotspots based on a holistic and comprehensive assessment on environmental impacts serves as an important starting point. After providing an overview of LCA methodology and a high-level description of the major REE production routes used from 1990s to today, this paper reviews the published LCA studies on the production of REEs. To date, almost all the LCA studies are based on process information collected from the operation of Mountain Pass facility in U.S. in 1990s and the operation of facilities in Bayan Obo, China. Knowledge gaps are identified and future research efforts are suggested to advance understanding on environmental impacts of REE production from the life-cycle perspective.

  20. Life-Cycle Assessment of the Production of Rare-Earth Elements for Energy Applications: A Review

    International Nuclear Information System (INIS)

    Navarro, Julio; Zhao, Fu

    2014-01-01

    Rare-earth elements (REEs) are a group of 17 elements with similar chemical properties, including 15 in the lanthanide group, yttrium, and scandium. Due to their unique physical and chemical properties, REEs gain increasing importance in many new energy technologies and systems that contribute to reduce greenhouse gas emissions and fossil fuel depletion (e.g., wind turbine, electric vehicles, high efficiency lighting, batteries, and hydrogen storage). However, it is well known that production of REEs is far from environmentally sustainable as it requires significant material and energy consumption while generating large amounts of air/water emissions and solid waste. Although life-cycle assessment (LCA) has been accepted as the most comprehensive approach to quantify the environmental sustainability of a product or process, to date, there have been only very limited LCA studies on the production of REEs. With the continual growth of renewable energy and energy efficient technologies, global production of REEs will increase. Therefore, reducing environmental footprints of REE production becomes critical and identifying environmental hotspots based on a holistic and comprehensive assessment on environmental impacts serves as an important starting point. After providing an overview of LCA methodology and a high-level description of the major REE production routes used from 1990s to today, this paper reviews the published LCA studies on the production of REEs. To date, almost all the LCA studies are based on process information collected from the operation of Mountain Pass facility in U.S. in 1990s and the operation of facilities in Bayan Obo, China. Knowledge gaps are identified and future research efforts are suggested to advance understanding on environmental impacts of REE production from the life-cycle perspective.

  1. Life cycle cost and economic assessment of biochar-based bioenergy production and biochar land application in Northwestern Ontario, Canada

    Institute of Scientific and Technical Information of China (English)

    Krish Homagain; Chander Shahi; Nancy Luckai; Mahadev Sharma

    2017-01-01

    Background:Replacement of fossil fuel based energy with biochar-based bioenergy production can help reduce greenhouse gas emissions while mitigating the adverse impacts of climate change and global warming.However,the production of biochar-based bioenergy depends on a sustainable supply of biomass.Although,Northwestern Ontario has a rich and sustainable supply of woody biomass,a comprehensive life cycle cost and economic assessment of biochar-based bioenergy production technology has not been done so far in the region.Methods:In this paper,we conducted a thorough life cycle cost assessment (LCCA) of biochar-based bioenergy production and its land application under four different scenarios:1) biochar production with low feedstock availability;2) biochar production with high feedstock availability;3) biochar production with low feedstock availability and its land application;and 4) biochar production with high feedstock availability and its land application-using SimaPro(R),EIOLCA(R) software and spreadsheet modeling.Based on the LCCA results,we further conducted an economic assessment for the break-even and viability of this technology over the project period.Results:It was found that the economic viability of biochar-based bioenergy production system within the life cycle analysis system boundary based on study assumptions is directly dependent on costs of pyrolysis,feedstock processing (drying,grinding and pelletization) and collection on site and the value of total carbon offset provided by the system.Sensitivity analysis of transportation distance and different values of C offset showed that the system is profitable in case of high biomass availability within 200 km and when the cost of carbon sequestration exceeds CAD S60 per tonne of equivalent carbon (CO2e).Conclusions:Biochar-based bioenergy system is economically viable when life cycle costs and environmental assumptions are accounted for.This study provides a medium scale slow-pyrolysis plant scenario and

  2. Impact of gastroesophageal reflux disease on work absenteeism, presenteeism and productivity in daily life: a European observational study

    Science.gov (United States)

    Gisbert, Javier P; Cooper, Alun; Karagiannis, Dimitrios; Hatlebakk, Jan; Agréus, Lars; Jablonowski, Helmut; Nuevo, Javier

    2009-01-01

    Background The RANGE (Retrospective ANalysis of GastroEsophageal reflux disease [GERD]) study assessed differences among patients consulting a primary care physician due to GERD-related reasons in terms of: symptoms, diagnosis and management, response to treatment, and effects on productivity, costs and health-related quality of life. This subanalysis of RANGE determined the impact of GERD on productivity in work and daily life. Methods RANGE was conducted at 134 primary care sites across six European countries (Germany, Greece, Norway, Spain, Sweden and the UK). All subjects (aged ≥18 years) who consulted with their primary care physician over a 4-month identification period were screened retrospectively, and those consulting at least once for GERD-related reasons were identified (index visit). From this population, a random sample was selected to enter the study and attended a follow-up appointment, during which the impact of GERD on productivity while working (absenteeism and presenteeism) and in daily life was evaluated using the self-reported Work Productivity and Activity Impairment Questionnaire for patients with GERD (WPAI-GERD). Results Overall, 373,610 subjects consulted with their primary care physician over the 4-month identification period, 12,815 for GERD-related reasons (3.4%); 2678 randomly selected patients attended the follow-up appointment. Average absenteeism due to GERD was highest in Germany (3.2 hours/week) and lowest in the UK (0.4 hours/week), with an average of up to 6.7 additional hours/week lost due to presenteeism in Norway. The average monetary impact of GERD-related work absenteeism and presenteeism were substantial in all countries (from €55/week per employed patient in the UK to €273/patient in Sweden). Reductions in productivity in daily life of up to 26% were observed across the European countries. Conclusion GERD places a significant burden on primary care patients, in terms of work absenteeism and presenteeism and in daily

  3. Impact of gastroesophageal reflux disease on work absenteeism, presenteeism and productivity in daily life: a European observational study

    Directory of Open Access Journals (Sweden)

    Hatlebakk Jan

    2009-10-01

    Full Text Available Abstract Background The RANGE (Retrospective ANalysis of GastroEsophageal reflux disease [GERD] study assessed differences among patients consulting a primary care physician due to GERD-related reasons in terms of: symptoms, diagnosis and management, response to treatment, and effects on productivity, costs and health-related quality of life. This subanalysis of RANGE determined the impact of GERD on productivity in work and daily life. Methods RANGE was conducted at 134 primary care sites across six European countries (Germany, Greece, Norway, Spain, Sweden and the UK. All subjects (aged ≥18 years who consulted with their primary care physician over a 4-month identification period were screened retrospectively, and those consulting at least once for GERD-related reasons were identified (index visit. From this population, a random sample was selected to enter the study and attended a follow-up appointment, during which the impact of GERD on productivity while working (absenteeism and presenteeism and in daily life was evaluated using the self-reported Work Productivity and Activity Impairment Questionnaire for patients with GERD (WPAI-GERD. Results Overall, 373,610 subjects consulted with their primary care physician over the 4-month identification period, 12,815 for GERD-related reasons (3.4%; 2678 randomly selected patients attended the follow-up appointment. Average absenteeism due to GERD was highest in Germany (3.2 hours/week and lowest in the UK (0.4 hours/week, with an average of up to 6.7 additional hours/week lost due to presenteeism in Norway. The average monetary impact of GERD-related work absenteeism and presenteeism were substantial in all countries (from €55/week per employed patient in the UK to €273/patient in Sweden. Reductions in productivity in daily life of up to 26% were observed across the European countries. Conclusion GERD places a significant burden on primary care patients, in terms of work absenteeism and

  4. Life-cycle assessment of typical Portuguese cork oak woodlands.

    Science.gov (United States)

    González-García, Sara; Dias, Ana Cláudia; Arroja, Luis

    2013-05-01

    Cork forest systems are responsible for making an important economic contribution to the Mediterranean region, especially Portugal where the cork oak woodlands or montados contain about 32% of the world's area. The environmental profile derived from reproduction cork production and extraction in two Portuguese regions (Tagus valley and Alentejo) representative of the Portuguese sector were assessed in detail using the Life-Cycle Assessment (LCA) methodology from a cradle-to-gate perspective. The production line was divided into four stages considering all the processes involved: stand establishment, stand management, cork stripping and field recovery. According to the environmental results, there were remarkable differences between the two production scenarios mainly due to the intensity and repetition of forest activities even though the cork yield was reported to be the same. The management system in the Alentejo region presented the worse environmental profile in almost all the impact categories under assessment, mainly due to the shorter cycle duration of the mechanical cleaning and pruning processes. Cork stripping was identified in both scenarios as the production stage with the highest contribution to the environmental profile due to the cleaning and pruning processes. A sensitivity assessment concerning the cork yield was performed since the average production yields in the Portuguese montados are lower than the ones used in this study. Thus, if the cork yield is reduced, the environmental profile in both scenarios gets worse since almost all the forest activities involved are the same. Copyright © 2013 Elsevier B.V. All rights reserved.

  5. Combination of irradiation with other treatments to improve the shelf-life and quality of meat and meat products

    International Nuclear Information System (INIS)

    Paul, P.; Chawla, S.P.; Kanatt, S.R.

    1998-01-01

    The effects were studied of low dose gamma irradiation in combination with other treatments (acetic acid and a sodium tripolyphosphate dip for buffalo meat; a hot water dip for lamb meat; ascorbic acid for chicken and curing for meat products) on the shelf-life of prepacked meats at chilled and ambient temperatures in terms of the microbiological, chemical and sensory qualities. Meats irradiated at 2.5 kGy had a shelf-life of 4 weeks at 0-3 deg. C, 2 weeks at 7-10 deg. C and 42 h at 28-30 deg. C, and showed a remarkable improvement in the microbiological quality. irradiation resulted in the reduction/elimination of microorganisms of public health significance, e.g. Enterobacteriaceae, Salmonella, staphylococci and faecal coliforms. In contrast, the corresponding control samples had a shelf-life of less than 2 weeks at 0-3 deg. C, 1 week at 7-10 deg. C and 18 h at ambient temperature (28-30 deg. C). A high level of microorganisms such as Enterobacteriaceae, staphylococci, Salmonella and sulphite reducing Clostridia were detected in the control samples during storage. A combination of acetic acid/hot water pretreatment and irradiation further improved the microbiological quality of the meats, while a pretreatment of sodium tripolyphosphate enhanced the retention of colour and the juiciness of the meat samples. The effects were observed at all the storage temperatures. For the meat products, a low dose of irradiation reduced the total viable counts by 1-2 log cycles, and also eliminated Enterobacteriaceae, staphylococci and Salmonella throughout the storage period. The irradiated meat products had a shelf-life of 2 weeks at 0-3 deg. C and 24 h at 28-30 deg. C, while the non-irradiated meat products had a shelf-life of 1 week at 0-3 deg. C and 18 h at 28-30 deg. C. (author)

  6. Life cycle assessment of sustainable raw material acquisition for functional magnetite bionanoparticle production.

    Science.gov (United States)

    Sadhukhan, Jhuma; Joshi, Nimisha; Shemfe, Mobolaji; Lloyd, Jonathan R

    2017-09-01

    Magnetite nanoparticles (MNPs) have several applications, including use in medical diagnostics, renewable energy production and waste remediation. However, the processes for MNP production from analytical-grade materials are resource intensive and can be environmentally damaging. This work for the first time examines the life cycle assessment (LCA) of four MNP production cases: (i) industrial MNP production system; (ii) a state-of-the-art MNP biosynthesis system; (iii) an optimal MNP biosynthesis system and (iv) an MNP biosynthesis system using raw materials sourced from wastewaters, in order to recommend a sustainable raw material acquisition pathway for MNP synthesis. The industrial production system was used as a benchmark to compare the LCA performances of the bio-based systems (cases ii-iv). A combination of appropriate life cycle impact assessment methods was employed to analyse environmental costs and benefits of the systems comprehensively. The LCA results revealed that the state-of-the-art MNP biosynthesis system, which utilises analytical grade ferric chloride and sodium hydroxide as raw materials, generated environmental costs rather than benefits compared to the industrial MNP production system. Nevertheless, decreases in environmental impacts by six-fold were achieved by reducing sodium hydroxide input from 11.28 to 1.55 in a mass ratio to MNPs and replacing ferric chloride with ferric sulphate (3.02 and 2.59, respectively, in a mass ratio to MNPs) in the optimal biosynthesis system. Thus, the potential adverse environmental impacts of MNP production via the biosynthesis system can be reduced by minimising sodium hydroxide and substituting ferric sulphate for ferric chloride. Moreover, considerable environmental benefits were exhibited in case (iv), where Fe(III) ions were sourced from metal-containing wastewaters and reduced to MNPs by electrons harvested from organic substrates. It was revealed that 14.4 kJ and 3.9 kJ of primary fossil resource

  7. The Effect of Age at First Calving and Calving Interval on Productive Life and Lifetime Profit in Korean Holsteins

    Directory of Open Access Journals (Sweden)

    Changhee Do

    2013-11-01

    Full Text Available This study was performed to estimate the effect of age at first calving and first two calving intervals on productive life and life time profit in Korean Holsteins. Reproduction data of Korean Holsteins born from 1998 to 2004 and lactation data from 276,573 cows with birth and last dry date that calved between 2000 and 2010 were used for the analysis. Lifetime profit increased with the days of life span. Regression of Life Span on Lifetime profit indicated that there was an increase of 3,800 Won (approximately $3.45 of lifetime profit per day increase in life span. This is evidence that care of each cow is necessary to improve net return and important for farms maintaining profitable cows. The estimates of heritability of age at first calving, first two calving intervals, days in milk for lifetime, lifespan, milk income and lifetime profit were 0.111, 0.088, 0.142, 0.140, 0.143, 0.123, and 0.102, respectively. The low heritabilities indicated that the productive life and economical traits include reproductive and productive characteristics. Age at first calving and interval between first and second calving had negative genetic correlation with lifetime profit (−0.080 and −0.265, respectively. Reducing age at first calving and first calving interval had a positive effect on lifetime profit. Lifetime profit increased to approximately 2,600,000 (2,363.6 from 800,000 Won ($727.3 when age at first calving decreased to (22.3 month from (32.8 month. Results suggested that reproductive traits such as age at first calving and calving interval might affect various economical traits and consequently influenced productive life and profitability of cows. In conclusion, regard of the age at first calving must be taken with the optimum age at first calving for maximum lifetime profit being 22.5 to 23.5 months. Moreover, considering the negative genetic correlation of first calving interval with lifetime profit, it should be reduced against the present

  8. The Role of Everyday Life Products and Social Practices in Sustainable Transitions

    DEFF Research Database (Denmark)

    Jensen, Charlotte Louise; Remmen, Arne

    2011-01-01

    and the way we live. When opting for a low carbon society, the innovation dynamics of everyday life products as well as consumption and practice patterns become an important field of investigation. Hence, to approach consumption aspects of using and interacting with energy using products, it is important...... to kill (Røpke, 2009), so in order to make people change practice, alternate routines that work has to be proposed and accepted. Practice theory can help understanding how practices work, and thus clarifying what has to be included in a study of potentials for a sustainable transition. Social practices...... to understand what practices the products are a part of when in use. According to Røpke (2009) “Primarily, people are practitioners who indirectly, through the performance of various practices, draw on resources”. Therefore, in order to make consumers aware of their actions in an environmental perspective...

  9. Improving the quality of life.

    Science.gov (United States)

    Suyono, H

    1993-12-01

    It is encouraging that most developing countries now have population policies, but it is discouraging that some countries have been unable to implement their policies. Therefore, Indonesia believes technical cooperation should be strengthened among developing countries. International cooperation is working in 108 developing countries, but the desired impact has yet to be reached, and the quality of life in many countries is still unacceptable. For example, life expectancy at birth in developing countries is 14-17 years shorter for females and 10-13 years shorter for males as compared to developed countries which have superior health and welfare systems. The speed of population growth is also hindering efforts to help improve living conditions, and the biggest increase in growth will occur in Asia and Africa. This will increase the numbers of poor, hungry, and illiterate in developing countries and will lead to a lack of arable land, deterioration in education, and increase in unsafe sanitation. In order to slow population growth, quality family planning (FP) services must be provided to those who want them. By the year 2000, developed countries and donors should be ready to provide half of the required US$10.5 billion to FP services in developing countries. In Indonesia, population programs and policies have been governed by the National FP Coordinating Board as well as by the State Ministry for Population and the Environment, which was divided into two ministries in 1993 in order to deal with the enormity and seriousness of the two issues.

  10. An examination of the association between premature mortality and life expectancy among men in Europe

    DEFF Research Database (Denmark)

    White, Alan; McKee, Martin; de Sousa, Bruno

    2014-01-01

    A feature of the health of men across Europe is their higher rates of premature mortality and shorter life expectancy at birth than women. Following the publication of the first State of Men's Health in Europe report, we sought to explore possible reasons....

  11. Life cycle assessment of the production of rare earth elements for energy applications: a review

    Directory of Open Access Journals (Sweden)

    Julio eNavarro

    2014-11-01

    Full Text Available Rare earth elements (REEs are a group of seventeen elements with similar chemical properties, including fifteen in the lanthanide group, yttrium, and scandium. Due to their unique physical and chemical properties REEs gain increasing importance in many new energy technologies and systems that contribute to reduce greenhouse gas emissions and fossil fuel depletion (e.g., wind turbine, electric vehicles, high efficiency lighting, batteries, and hydrogen storage. However, it is well known that production of REEs is far from environmentally sustainable as it requires significant material and energy consumption while generating large amounts of air/water emissions and solid waste. Although life cycle assessment (LCA has been accepted as the most comprehensive approach to quantify the environmental sustainability of a product or process, to date, there have been only very limited LCA studies on the production of REEs. With the continual growth of renewable energy and energy efficient technologies, global production of REEs will increase. Therefore reducing environmental footprints of REE production becomes critical and identifying environmental hotspots based on a holistic and comprehensive assessment on environmental impacts serves as an important starting point. After providing an overview of LCA methodology and a high-level description of the major REE production routes used from 1990s to today, this paper reviews the published LCA studies on the production of REEs. To date, almost all the LCA studies are based on process information collected from the operation of Mountain Pass facility in U.S. in 1990s and the operation of facilities in Bayan Obo, China. Knowledge gaps are identified and future research efforts are suggested to advance understanding on environmental impacts of REE production from the life cycle perspective.

  12. Impact of the utilization of a product configuration system on product’s life cycle complexity

    DEFF Research Database (Denmark)

    Myrodia, Anna; Kristjansdottir, Katrin; Shafiee, Sara

    The purpose of this paper is to identify areas throughout a product’s lifecycle processes where complexity can be reduced by implementing a product configuration system (PCS). As discussed in the literature, several benefits are realized by using a PCS in terms of product and process standardizat...... for the company in several life cycle processes....... standardization. This also leads to control and reduce of complexity both in products and processes. To this end, this research attempts to quantify and assess these benefits and is supported by empirical evidence. A case study of an engineering company is used and the results indicate significant improvements...

  13. Hereditary angioedema attacks resolve faster and are shorter after early icatibant treatment.

    Directory of Open Access Journals (Sweden)

    Marcus Maurer

    Full Text Available BACKGROUND: Attacks of hereditary angioedema (HAE are unpredictable and, if affecting the upper airway, can be lethal. Icatibant is used for physician- or patient self-administered symptomatic treatment of HAE attacks in adults. Its mode of action includes disruption of the bradykinin pathway via blockade of the bradykinin B(2 receptor. Early treatment is believed to shorten attack duration and prevent severe outcomes; however, evidence to support these benefits is lacking. OBJECTIVE: To examine the impact of timing of icatibant administration on the duration and resolution of HAE type I and II attacks. METHODS: The Icatibant Outcome Survey is an international, prospective, observational study for patients treated with icatibant. Data on timings and outcomes of icatibant treatment for HAE attacks were collected between July 2009-February 2012. A mixed-model of repeated measures was performed for 426 attacks in 136 HAE type I and II patients. RESULTS: Attack duration was significantly shorter in patients treated <1 hour of attack onset compared with those treated ≥ 1 hour (6.1 hours versus 16.8 hours [p<0.001]. Similar significant effects were observed for <2 hours versus ≥ 2 hours (7.2 hours versus 20.2 hours [p<0.001] and <5 hours versus ≥ 5 hours (8.0 hours versus 23.5 hours [p<0.001]. Treatment within 1 hour of attack onset also significantly reduced time to attack resolution (5.8 hours versus 8.8 hours [p<0.05]. Self-administrators were more likely to treat early and experience shorter attacks than those treated by a healthcare professional. CONCLUSION: Early blockade of the bradykinin B(2 receptor with icatibant, particularly within the first hour of attack onset, significantly reduced attack duration and time to attack resolution.

  14. Bioethanol production from corn stover residues. Process design and Life Cycle Assessment

    International Nuclear Information System (INIS)

    De Bari, I.; Dinnino, G.; Braccio, G.

    2008-01-01

    In this report, the mass and energy balance along with a land-to-wheel Life Cycle Assessment (LCA) is described for a corn stover-to-ethanol industrial process assumed to consist of the main technologies being researched at ENEA TRISAIA: pretreatment by steam explosion and enzymatic hydrolysis. The modelled plant has a processing capacity of 60kt/y (dimensioned on realistic supplying basins of residues in Italy); biomass is pre-treated by acid catalyzed-steam explosion; cellulose and hemicelluloses are hydrolyzed and separately fermented; enzymes are on-site produced. The main target was to minimize the consumption of fresh water, enzymes and energy. The results indicate that the production of 1kg bio ethanol (95.4 wt%) requires 3.5 kg biomass dry matter and produces an energy surplus up to 740 Wh. The main purpose of the LCA analysis was to assess the environmental impact of the entire life cycle from the bio ethanol production up to its end-use as E10 blended gasoline. Boustead Model was used as tool to compile the life cycle inventory. The results obtained and discussed in this reports suffer of some limitations deriving from the following main points: some process yields have been extrapolated according to optimistic development scenarios; the energy and steam recovery could be lower than that projected because of lacks in the real systems; water recycle could be limited by the yeast tolerance toward the potential accumulation of toxic compounds. Nevertheless, the detailed process analysis here provided has its usefulness in: showing the challenging targets (even if they are ambitious) to bet on to make the integrated process feasible; driving the choice of the most suitable technologies to bypass some process bottlenecks [it

  15. Investigations of model polymers: Dynamics of melts and statics of a long chain in a dilute melt of shorter chains

    International Nuclear Information System (INIS)

    Bishop, M.; Ceperley, D.; Frisch, H.L.; Kalos, M.H.

    1982-01-01

    We report additional results on a simple model of polymers, namely the diffusion in concentrated polymer systems and the static properties of one long chain in a dilute melt of shorter chains. It is found, for the polymer sizes and time scales amenable to our computer calculations, that there is as yet no evidence for a ''reptation'' regime in a melt. There is some indication of reptation in the case of a single chain moving through fixed obstacles. No statistically significant effect of the change, from excluded volume behavior of the long chain to ideal behavior as the shorter chains grow, is observed

  16. Improved coordination of the production cycle in the paper industry : To manage a wide product range and sequence-dependent changeovers

    OpenAIRE

    Johansson, Carl; Strandberg, Erik

    2015-01-01

    Today the manufacturing industry is faced with the challenge to stay competitive in an era of shorter product lifecycles and increased product variety. This has forced manufacturing companies to deal with an increased amount of products and more and faster changes to the product line. The same trend can also be seen in the paper industry where bulk products decreasing and more diversified products in smaller lot-sizes increasing, with a greater focus on customer specific products. Traditional...

  17. End-of-life flows of multiple cycle consumer products

    International Nuclear Information System (INIS)

    Tsiliyannis, C.A.

    2011-01-01

    Explicit expressions for the end-of-life flows (EOL) of single and multiple cycle products (MCPs) are presented, including deterministic and stochastic EOL exit. The expressions are given in terms of the physical parameters (maximum lifetime, T, annual cycling frequency, f, number of cycles, N, and early discard or usage loss). EOL flows are also obtained for hi-tech products, which are rapidly renewed and thus may not attain steady state (e.g. electronic products, passenger cars). A ten-step recursive procedure for obtaining the dynamic EOL flow evolution is proposed. Applications of the EOL expressions and the ten-step procedure are given for electric household appliances, industrial machinery, tyres, vehicles and buildings, both for deterministic and stochastic EOL exit, (normal, Weibull and uniform exit distributions). The effect of the physical parameters and the stochastic characteristics on the EOL flow is investigated in the examples: it is shown that the EOL flow profile is determined primarily by the early discard dynamics; it also depends strongly on longevity and cycling frequency: higher lifetime or early discard/loss imply lower dynamic and steady state EOL flows. The stochastic exit shapes the overall EOL dynamic profile: Under symmetric EOL exit distribution, as the variance of the distribution increases (uniform to normal to deterministic) the initial EOL flow rise becomes steeper but the steady state or maximum EOL flow level is lower. The steepest EOL flow profile, featuring the highest steady state or maximum level, as well, corresponds to skew, earlier shifted EOL exit (e.g. Weibull). Since the EOL flow of returned products consists the sink of the reuse/remanufacturing cycle (sink to recycle) the results may be used in closed loop product lifecycle management operations for scheduling and sizing reverse manufacturing and for planning recycle logistics. Decoupling and quantification of both the full age EOL and of the early discard flows is

  18. Pricing and Warranty Level Decisions for New and Remanufactured Short Life-Cycle Products

    Directory of Open Access Journals (Sweden)

    Gan Shu San

    2017-06-01

    Full Text Available Remanufacturing has become more prominent as a recovery process to mitigate the massive disposal of short life-cycle product at its end-of-use. However, remanufactured product is often perceived to be inferior to new product, and it has lower value in consumer’s willingness to pay. To increase the perceived quality of the remanufactured product, manufacturer offers a warranty, since one of the three roles possessed in warranty is being a signal to product reliability. This paper studies the pricing decisions and warranty level decision for new and remanufactured products in a closed-loop supply chain consists of a manufacturer and a retailer. The optimization modeling is performed under Stackelberg game with manufacturer as the leader. We found that higher expansion effectiveness coefficient would increase the supply chain profit. Also, there is an interval of demand’s speed of change, where the total profit would be at its highest. The optimum warranty level can be achieved regardless the initial warranty level set at the beginning of retailer’s optimization. Furthermore, the remanufactured product’s wholesale and retail prices are influenced by the expansion effectiveness coefficient.

  19. Sockets Manufactured by CAD/CAM Method Have Positive Effects on the Quality of Life of Patients With Transtibial Amputation.

    Science.gov (United States)

    Karakoç, Mehmet; Batmaz, İbrahim; Sariyildiz, Mustafa Akif; Yazmalar, Levent; Aydin, Abdülkadir; Em, Serda

    2017-08-01

    Patients with amputation need prosthesis to comfortably move around. One of the most important parts of a good prosthesis is the socket. Currently, the most commonly used method is the traditional socket manufacturing method, which involves manual work; however, computer-aided design/computer-aided manufacturing (CAD/CAM) is also being used in the recent years. The present study aimed to investigate the effects of sockets manufactured by traditional and CAD/CAM method on clinical characteristics and quality of life of patients with transtibial amputation. The study included 72 patients with transtibial amputation using prosthesis, 36 of whom had CAD/CAM prosthetic sockets (group 1) and 36 had traditional prosthetic sockets (group 2). Amputation reason, prosthesis lifetime, walking time and distance with prosthesis, pain-free walking time with prosthesis, production time of the prosthesis, and adaptation time to the prosthesis were questioned. Quality of life was assessed using the 36-item Short Form Health Survey questionnaire and the Trinity Amputation and Prosthesis Experience Scales. Walking time and distance and pain-free walking time with prosthesis were significantly better in group 1 than those in group 2. Furthermore, the prosthesis was applied in a significantly shorter time, and socket adaptation time was significantly shorter in group 1. Except emotional role limitation, all 36-item Short Form Healthy Survey questionnaire parameters were significantly better in group 1 than in group 2. Trinity Amputation and Prosthesis Experience Scales activity limitation scores of group 1 were lower, and Trinity Amputation and Prosthesis Experience Scales satisfaction with the prosthesis scores were higher than those in group 2. Our study demonstrated that the sockets manufactured by CAD/CAM methods yield better outcomes in quality of life of patients with transtibial amputation than the sockets manufactured by the traditional method.

  20. How Small Businesses Market Their Products during the Different Phases of the Product Life Cycle: The Case of Swedish Ice Cream Manufacturers

    OpenAIRE

    Annika Hallberg; Susana Friberg; Paulina Myhrman

    2014-01-01

    The Swedish ice cream market of today is dominated by a few major market leaders, which makes it a challenge for small firms to make themselves visible and survive on a long-term basis. The aim of this article is to investigate and understand how small firms in the ice cream business market their products, based on the marketing mix and the portfolio matrix, during the different phases of the product life cycle. The combination of the two models for strategic planning enables t...

  1. Knocking on Industry’s Door: Needs in Product-Cost Optimization in the Early Product Life Cycle Stages

    Directory of Open Access Journals (Sweden)

    Matthias Walter

    2017-12-01

    Full Text Available While theoretical concepts for product-costing methodologies have evolved over the decades, little emphasis has been placed on their integration into modern information systems. During a co-innovation workshop at SAP SE, we initiated our collaborative research with selected large-scale enterprises from the discrete manufacturing industry. Moreover, we conducted interviews with business experts to gain a sophisticated understanding of the cost-optimization process itself. As a result, we present an exemplary optimization process with an emphasis on the specific characteristics of the product development stage. Based upon this example, we identified associated deficits in information system support. No current software fulfills the enterprises’ requirements regarding cost optimization in the early stages of a product’s life cycle. Thus, the respective processes lack integration in corporate environments. Taking this on, our article compiles detailed problem identification and, moreover, suggests approaches to overcome these hurdles.

  2. Life cycle greenhouse gas impacts of ethanol, biomethane and limonene production from citrus waste

    Science.gov (United States)

    Pourbafrani, Mohammad; McKechnie, Jon; MacLean, Heather L.; Saville, Bradley A.

    2013-03-01

    The production of biofuel from cellulosic residues can have both environmental and financial benefits. A particular benefit is that it can alleviate competition for land conventionally used for food and feed production. In this research, we investigate greenhouse gas (GHG) emissions associated with the production of ethanol, biomethane, limonene and digestate from citrus waste, a byproduct of the citrus processing industry. The study represents the first life cycle-based evaluations of citrus waste biorefineries. Two biorefinery configurations are studied—a large biorefinery that converts citrus waste into ethanol, biomethane, limonene and digestate, and a small biorefinery that converts citrus waste into biomethane, limonene and digestate. Ethanol is assumed to be used as E85, displacing gasoline as a light-duty vehicle fuel; biomethane displaces natural gas for electricity generation, limonene displaces acetone in solvents, and digestate from the anaerobic digestion process displaces synthetic fertilizer. System expansion and two allocation methods (energy, market value) are considered to determine emissions of co-products. Considerable GHG reductions would be achieved by producing and utilizing the citrus waste-based products in place of the petroleum-based or other non-renewable products. For the large biorefinery, ethanol used as E85 in light-duty vehicles results in a 134% reduction in GHG emissions compared to gasoline-fueled vehicles when applying a system expansion approach. For the small biorefinery, when electricity is generated from biomethane rather than natural gas, GHG emissions are reduced by 77% when applying system expansion. The life cycle GHG emissions vary substantially depending upon biomethane leakage rate, feedstock GHG emissions and the method to determine emissions assigned to co-products. Among the process design parameters, the biomethane leakage rate is critical, and the ethanol produced in the large biorefinery would not meet EISA

  3. Life cycle greenhouse gas impacts of ethanol, biomethane and limonene production from citrus waste

    International Nuclear Information System (INIS)

    Pourbafrani, Mohammad; MacLean, Heather L; Saville, Bradley A; McKechnie, Jon

    2013-01-01

    The production of biofuel from cellulosic residues can have both environmental and financial benefits. A particular benefit is that it can alleviate competition for land conventionally used for food and feed production. In this research, we investigate greenhouse gas (GHG) emissions associated with the production of ethanol, biomethane, limonene and digestate from citrus waste, a byproduct of the citrus processing industry. The study represents the first life cycle-based evaluations of citrus waste biorefineries. Two biorefinery configurations are studied—a large biorefinery that converts citrus waste into ethanol, biomethane, limonene and digestate, and a small biorefinery that converts citrus waste into biomethane, limonene and digestate. Ethanol is assumed to be used as E85, displacing gasoline as a light-duty vehicle fuel; biomethane displaces natural gas for electricity generation, limonene displaces acetone in solvents, and digestate from the anaerobic digestion process displaces synthetic fertilizer. System expansion and two allocation methods (energy, market value) are considered to determine emissions of co-products. Considerable GHG reductions would be achieved by producing and utilizing the citrus waste-based products in place of the petroleum-based or other non-renewable products. For the large biorefinery, ethanol used as E85 in light-duty vehicles results in a 134% reduction in GHG emissions compared to gasoline-fueled vehicles when applying a system expansion approach. For the small biorefinery, when electricity is generated from biomethane rather than natural gas, GHG emissions are reduced by 77% when applying system expansion. The life cycle GHG emissions vary substantially depending upon biomethane leakage rate, feedstock GHG emissions and the method to determine emissions assigned to co-products. Among the process design parameters, the biomethane leakage rate is critical, and the ethanol produced in the large biorefinery would not meet EISA

  4. Environmental life cycle assessment of methanol and electricity co-production system based on coal gasification technology.

    Science.gov (United States)

    Śliwińska, Anna; Burchart-Korol, Dorota; Smoliński, Adam

    2017-01-01

    This paper presents a life cycle assessment (LCA) of greenhouse gas emissions generated through methanol and electricity co-production system based on coal gasification technology. The analysis focuses on polygeneration technologies from which two products are produced, and thus, issues related to an allocation procedure for LCA are addressed in this paper. In the LCA, two methods were used: a 'system expansion' method based on two approaches, the 'avoided burdens approach' and 'direct system enlargement' methods and an 'allocation' method involving proportional partitioning based on physical relationships in a technological process. Cause-effect relationships in the analysed production process were identified, allowing for the identification of allocation factors. The 'system expansion' method involved expanding the analysis to include five additional variants of electricity production technologies in Poland (alternative technologies). This method revealed environmental consequences of implementation for the analysed technologies. It was found that the LCA of polygeneration technologies based on the 'system expansion' method generated a more complete source of information on environmental consequences than the 'allocation' method. The analysis shows that alternative technologies chosen for generating LCA results are crucial. Life cycle assessment was performed for the analysed, reference and variant alternative technologies. Comparative analysis was performed between the analysed technologies of methanol and electricity co-production from coal gasification as well as a reference technology of methanol production from the natural gas reforming process. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Life Cycle Analysis of the Production of FT-Fuels. 4 Different Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Blinge, M. [Chalmers University of Technology (Sweden); Rehnlund, B. [Atrax Energi AB (Sweden); Larsen, U.; Lundorf, P.; Ivarsson, A.; Schramm, J. [Technical University of Denmark (Denmark)

    2006-11-15

    This paper deals with aspects concerning the life cycle aspects regarding Fischer-Tropsch (FT) fuels. Four different scenarios are being analysed based on Life Cycle Assessment (LCA) figures. The results etc presented below emanates from a project undertaken by the International Energy Agency's (IEA) Implementing Agreement on Advanced Motor Fuels (IEA/AMF). The project has been carried out as an IEA/AMF annex, number XXXI, with financial support from the USA, Finland and Denmark. Some important results from the scenario studies based on the evaluated LCA data are: Production and use of GTL fuel has the potential of contributing about the same or slightly less greenhouse gas to the atmosphere than production and use of conventional diesel; Production and use of CTL emits more than twice as much greenhouse gases compared to traditional fuels; Production and use of BTL reduces the emissions of greenhouse gases by 60-90 %; To substitute 15 % of the EU 15 countries fuel consumption would an area of 310 000 km2 be cultivated with Salix. This corresponds to an area of the size of Poland. It would also require 122 FTplants of 1,6 GW; Theoretically, it is possible supply the worlds need for energy with biomass. However, planning the production, the localization of plants, building the infrastructure, this will take time and requires heavy long-term investments; The demand for Natural gas is increasing and there is no way for the US to meet an increased demand from supplying the vehicle fleet with F-T fuels from domestic reserves. With the political situation in the Middle East and in Venezuela, it doesn't seem likely that this solution will ease the US problems with reducing their oil dependences. The IEA/AMF project has also included emission tests on road vehicles fuelled by FT-Gasoline. These tests have been performed by The Technical University of Denmark and will be presented in another presentation at the ISAF XVI, 'Emissions from Road Vehicles Fuelled

  6. Risk assessment considerations for plant protection products and terrestrial life-stages of amphibians.

    Science.gov (United States)

    Weltje, Lennart; Ufer, Andreas; Hamer, Mick; Sowig, Peter; Demmig, Sandra; Dechet, Friedrich

    2018-04-28

    Some amphibians occur in agricultural landscapes during certain periods of their life cycle and consequently might be exposed to plant protection products (PPPs). While the sensitivity of aquatic life-stages is considered to be covered by the standard assessment for aquatic organisms (especially fish), the situation is less clear for terrestrial amphibian life-stages. In this paper, considerations are presented on how a risk assessment for PPPs and terrestrial life-stages of amphibians could be conducted. It discusses available information concerning the toxicity of PPPs to terrestrial amphibians, and their potential exposure to PPPs in consideration of aspects of amphibian biology. The emphasis is on avoiding additional vertebrate testing as much as possible by using exposure-driven approaches and by making use of existing vertebrate toxicity data, where appropriate. Options for toxicity testing and risk assessment are presented in a flowchart as a tiered approach, progressing from a non-testing approach, to simple worst-case laboratory testing, to extended laboratory testing, to semi-field enclosure tests and ultimately to full-scale field testing and monitoring. Suggestions are made for triggers to progress to higher tiers. Also, mitigation options to reduce the potential for exposure of terrestrial life-stages of amphibians to PPPs, if a risk were identified, are discussed. Finally, remaining uncertainties and research needs are considered by proposing a way forward (road map) for generating additional information to inform terrestrial amphibian risk assessment. Copyright © 2018 Elsevier B.V. All rights reserved.

  7. Lagged life cycle structures for food products: Their role in global marketing, their determinants and some problems in their estimation

    DEFF Research Database (Denmark)

    Baadsgaard, Allan; Gede, Mads Peter; Grunert, Klaus G.

    cycles for different product categories may be lagged (type II lag) because changes in economic and other factors will result in demands for different products. Identifying lagged life cycle structures major importance in global marketing of food products. The problems in arriving at such estimates...

  8. Is equity confined to the shorter term projects - and if not, what does it need?

    International Nuclear Information System (INIS)

    Cryan, T.

    1996-01-01

    There are two types of equity investor generally found in shorter term energy projects: energy project developers or sponsors who view a given project as buying or building a business; and financial investors who have viewed an investment as buying a stream of cash flows. This article examines the objectives and needs of these two investor groups, and discusses the principal issues which govern their respective decision-making process. (author)

  9. Concurrency in product realization

    Science.gov (United States)

    Kelly, Michael J.

    1994-03-01

    Technology per se does not provide a competitive advantage. Timely exploitation of technology is what gives the competitive edge, and this demands a major shift in the product development process and management of the industrial enterprise. `Teaming to win' is more than a management theme; it is the disciplined engineering practice that is essential to success in today's global marketplace. Teaming supports the concurrent engineering practices required to integrate the activities of people responsible for product realization through achievement of shorter development cycles, lower costs, and defect-free products.

  10. The value of atorvastatin over the product life cycle in the United States.

    Science.gov (United States)

    Grabner, Michael; Johnson, Wallace; Abdulhalim, Abdulla M; Kuznik, Andreas; Mullins, C Daniel

    2011-10-01

    US health care reform mandates the reduction of wasteful health care spending while maintaining quality of care. Introducing new drugs into crowded therapeutic classes may be viewed as offering "me-too" (new drugs with a similar mechanism of action compared to existing drugs) drugs without incremental benefit. This article presents an analysis of the incremental costs and benefits of atorvastatin, a lipid-lowering agent. This analysis models the cost-effectiveness of atorvastatin over the product life cycle. The yearly cost-effectiveness of atorvastatin compared to simvastatin was modeled from 1997 to 2030 from the point of view of a US third-party payer. Estimates for incremental costs (in US $) and effects (in quality-adjusted life-years [QALYs]) for the primary and secondary prevention of cardiovascular events were taken from previously published literature and adjusted for changes in drug prices over time. Estimates of total statin use were derived using the National Health and Nutrition Examination Survey. Sensitivity analyses were conducted to examine variations in study parameters, including drug prices, indications, and discount rates. Assuming increasing statin use over time (with a mean of 1.07 million new users per year) and a 3% discount rate, the cumulative incremental cost-effectiveness ratio (ICER) of atorvastatin versus simvastatin ranged from cost-savings at release to a maximum of $45,066/QALY after 6 years of generic simvastatin use in 2012. Over the full modeled life cycle (1997-2030), the cumulative ICER of atorvastatin was $20,331/QALY. The incremental value of atorvastatin to US payers (after subtracting costs) was estimated at $44.57 to $194.78 billion, depending on willingness to pay. Findings from the sensitivity analyses were similar. A hypothetical situation in which atorvastatin did not exist was associated with a reduction in total expenditures but also a loss of QALYs gained. The cumulative ICER of atorvastatin varied across the

  11. Life cycle assessment of a road safety product made with virgin and recycled HDPE.

    Science.gov (United States)

    Simões, Carla L; Xará, Susana M; Bernardo, C A

    2011-04-01

    The present study aims at evaluating the potential environmental impact of using recycled high-density polyethylene (HDPE) in the production of an anti-glare lamella (AGL), a road safety device currently manufactured from virgin (not recycled) polymer. The impact was evaluated using the life cycle assessment (LCA) technique and comparing two alternative systems: current AGL, manufactured from virgin HDPE, and optional AGL, made with recycled HDPE obtained from post-consumer packages. The AGL manufacturing phase was found to be responsible for most of the impacts in both systems, with the production of the raw material being the largest contributor for that phase. The present study makes a contribution to the problem of developing value-added products made from post-consumer polymeric recyclates.

  12. Assessing the Life-Cycle Performance of Hydrogen Production via Biofuel Reforming in Europe

    OpenAIRE

    Susmozas, Ana; Iribarren, Diego; Dufour, Javier

    2015-01-01

    Currently, hydrogen is mainly produced through steam reforming of natural gas. However, this conventional process involves environmental and energy security concerns. This has led to the development of alternative technologies for (potentially) green hydrogen production. In this work, the environmental and energy performance of biohydrogen produced in Europe via steam reforming of glycerol and bio-oil is evaluated from a life-cycle perspective, and contrasted with that of conventional hydroge...

  13. A spatially and temporally explicit, individual-based, life-history and productivity modeling approach for aquatic species

    Science.gov (United States)

    Realized life history expression and productivity in aquatic species, and salmonid fishes in particular, is the result of multiple interacting factors including genetics, habitat, growth potential and condition, and the thermal regime individuals experience, both at critical stag...

  14. Defoliation and bark harvesting affect life-history traits of a tropical tree

    DEFF Research Database (Denmark)

    Gaoue, Orou; Horvitz, Carol; Ticktin, Tamara

    2013-01-01

    Selectively harvesting whole individuals in managed populations (e.g. fisheries, hunting) has substantial effects on life expectancy and age at maturity. Although demographic rates of trees are impacted by recurrent harvest of plant organs (e.g. fruit, leaf, bark) known as non-timber forest...... of life expectancy to perturbation of vital rates to the elasticities of population growth rate, emphasizing how the two kinds of elasticity address distinct biological issues and management goals. Life expectancy was shorter and reproduction delayed in the dry than in the moist region, indicating a cost...... of drought to life-history traits. Harvesting at constant rates only affects (increased) life expectancy in the moist region and (reduced) age at first reproduction in the dry region. Models in which harvest intensity varies stochastically over time show results similar to those with constant harvesting rate...

  15. Life cycle water demand coefficients for crude oil production from five North American locations.

    Science.gov (United States)

    Ali, Babkir; Kumar, Amit

    2017-10-15

    The production of liquid fuels from crude oil requires water. There has been limited focus on the assessment of life cycle water demand footprints for crude oil production and refining. The overall aim of this paper is address this gap. The objective of this research is to develop water demand coefficients over the life cycle of fuels produced from crude oil pathways. Five crude oil fields were selected in the three North American countries to reflect the impact of different spatial locations and technologies on water demand. These include the Alaska North Slope, California's Kern County heavy oil, and Mars in the U.S.; Maya in Mexico; and Bow River heavy oil in Alberta, Canada. A boundary for an assessment of the life cycle water footprint was set to cover the unit operations related to exploration, drilling, extraction, and refining. The recovery technology used to extract crude oil is one of the key determining factors for water demand. The amount of produced water that is re-injected to recover the oil is essential in determining the amount of fresh water that will be required. During the complete life cycle of one barrel of conventional crude oil, 1.71-8.25 barrels of fresh water are consumed and 2.4-9.51 barrels of fresh water are withdrawn. The lowest coefficients are for Bow River heavy oil and the highest coefficients are for Maya crude oil. Of all the unit operations, exploration and drilling require the least fresh water (less than 0.015 barrel of water per barrel of oil produced). A sensitivity analysis was conducted and uncertainty in the estimates was determined. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Stochastic Dynamic Programming for Three-Echelon Inventory System of Limited Shelf Life Products

    Directory of Open Access Journals (Sweden)

    Galal Noha M.

    2016-01-01

    Full Text Available Coordination of inventory decisions within the supply chain is one of the major determinants of its competitiveness in the global market. Products with limited shelf life impose additional challenges in managing the inventory across the supply chain because of the additional wastage costs incurred in case of being stored beyond product’s useful life. This paper presents a stochastic dynamic programming model for inventory replenishment in a serial multi-echelon distribution supply chain. The model considers uncertain stationary discrete demand at the retailer and zero lead time. The objective is to minimize expected total costs across the supply chain echelons, while maintaining a preset service level. The results illustrate that a cost saving of around 17% is achievable due to coordinating inventory decisions across the supply chain.

  17. Shorter preschool, leukocyte telomere length is associated with obesity at age 9 in Latino children.

    Science.gov (United States)

    Kjaer, T W; Faurholt-Jepsen, D; Mehta, K M; Christensen, V B; Epel, E; Lin, J; Blackburn, E; Wojcicki, J M

    2018-04-01

    The aim of this study was to determine the potential role of leukocyte telomere length as a biomarker for development of childhood obesity in a low-income Latino population. A birth cohort of Latino children (N = 201) in San Francisco (recruited May 2006-May 2007) was followed until age 9 and assessed annually for obesity and dietary intake. Leukocyte telomere length was measured at 4 and 5 years (n = 102) and assessed as a predictor for obesity at age 9, adjusting for known risk factors. Furthermore, leukocyte telomere length at age 4 and 5 was evaluated as a possible mediator of the relationship between excessive sugar-sweetened beverage consumption and obesity at age 9. Shorter leukocyte telomere length in preschoolers was associated with obesity at age 9 (adjusted odds ratio 0.35, 95% confidence interval 0.13-0.94) after adjustment for known risk factors. Telomere length mediated 11% of the relationship between excessive sugar-sweetened beverage consumption and obesity. Shorter leukocyte telomere length may be an indicator of future obesity risk in high-risk populations as it is particularly sensitive to damage from oxidative stress exposure, including those from sugar-sweetened beverages. © 2017 World Obesity Federation.

  18. Are Shorter Versions of the Positive and Negative Syndrome Scale (PANSS) Doable? A Critical Review.

    Science.gov (United States)

    Lindenmayer, Jean-Pierre

    2017-12-01

    The Positive and Negative Syndrome Scale (PANSS) is a well-established assessment tool for measuring symptom severity in schizophrenia. Researchers and clinicians have been interested in the development of a short version of the PANSS that could reduce the burden of its administration for patients and raters. The author presents a comprehensive overview of existing brief PANSS measures, including their strengths and limitations, and discusses some possible next steps. There are two available scales that offer a reduced number of original PANSS items: PANSS-14 and PANSS-19; and two shorter versions that include six items: Brief PANSS and PANSS-6. The PANSS-6 has been tested quite extensively in established trials and appears to demonstrate high sensitivity to change and an established cut off definition for remission. Prospective testing in new antipsychotic treatment trials is still required for these shorter versions of PANSS. In addition, they need to be supplemented with interview guides, as well as provide conversion formulas to translate total scores from the short PANSS versions to the PANSS-30. Both short versions of the PANSS are essentially designed to evaluate response to antipsychotic treatment. Future PANSS scale development needs to address specific measurement of treatment-responsive positive symptoms by including treatment-sensitive items, as well as illness-phase specific PANSS tools.

  19. Life Cycle Sustainability Dashboard

    DEFF Research Database (Denmark)

    Traverso, Marzia; Finkbeiner, Matthias; Jørgensen, Andreas

    2012-01-01

    One method to assess the sustainability performance of products is life cycle sustainability assessment (LCSA), which assesses product performance considering the environmental,economic, and social dimensions of the life cycle. The results of LCSA can be used to compare different products...... of sustainability is the communicability of the results by means of a graphical representation (a cartogram), characterized by a suitable chromatic scale and ranking score. The integration of LCSA and the dashboard of sustainability into a so-called Life Cycle Sustainability Dashboard (LCSD) is described here...

  20. Sustainable design for automotive products: dismantling and recycling of end-of-life vehicles.

    Science.gov (United States)

    Tian, Jin; Chen, Ming

    2014-02-01

    The growth in automotive production has increased the number of end-of-life vehicles (ELVs) annually. The traditional approach ELV processing involves dismantling, shredding, and landfill disposal. The "3R" (i.e., reduce, reuse, and recycle) principle has been increasingly employed in processing ELVs, particularly ELV parts, to promote sustainable development. The first step in processing ELVs is dismantling. However, certain parts of the vehicle are difficult to disassemble and use in practice. The extended producer responsibility policy requires carmakers to contribute in the processing of scrap cars either for their own developmental needs or for social responsibility. The design for dismantling approach can be an effective solution to the existing difficulties in dismantling ELVs. This approach can also provide guidelines in the design of automotive products. This paper illustrates the difficulty of handling polymers in dashboards. The physical properties of polymers prevent easy separation and recycling by using mechanical methods. Thus, dealers have to rely on chemical methods such as pyrolysis. Therefore, car designers should use a single material to benefit dealers. The use of materials for effective end-of-life processing without sacrificing the original performance requirements of the vehicle should be explored. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. Design for life-cycle profit with simultaneous consideration of initial manufacturing and end-of-life remanufacturing

    Science.gov (United States)

    Kwak, Minjung; Kim, Harrison

    2015-01-01

    Remanufacturing is emerging as a promising solution for achieving green, profitable businesses. This article considers a manufacturer that produces new products and also remanufactured versions of the new products that become available at the end of their life cycle. For such a manufacturer, design decisions at the initial design stage determine both the current profit from manufacturing and future profit from remanufacturing. To maximize the total profit, design decisions must carefully consider both ends of product life cycle, i.e. manufacturing and end-of-life stages. This article proposes a decision-support model for the life-cycle design using mixed-integer nonlinear programming. With an aim to maximize the total life-cycle profit, the proposed model searches for an (at least locally) optimal product design (i.e. design specifications and the selling price) for the new and remanufactured products. It optimizes both the initial design and design upgrades at the end-of-life stage and also provides corresponding production strategies, including production quantities and take-back rate. The model is extended to a multi-objective model that maximizes both economic profit and environmental-impact saving. To illustrate, the developed model is demonstrated with an example of a desktop computer.

  2. Optimal Consumer Electronics Product Take-Back Time with Consideration of Consumer Value

    Directory of Open Access Journals (Sweden)

    Yi-Tse Fang

    2017-03-01

    Full Text Available Rapid economic growth in recent years has transformed our lifestyle to massively produce, consume, and dispose of products, especially for consumer electronics. This change has put great threat to our environment and caused natural resource depletion. Moreover, short product life cycles and quick replacements of consumer electronics create enormous electronic wastes (e-wastes. Without proper waste management, immense environmental damage is expected. In this empirical study, we notice that lots of valuable materials that can still be recycled from these used consumer electronics are left unused at home instead of being recycled at the appropriate time, which causes a low collection rate and a decrease in residual value for the used products. Therefore, it is important for the government and the recyclers to handle them efficiently by increasing the used product take-back rate. Our study develops an assessment model for customer value based on the idea of value engineering and the perspective of product life cycle. We also explore the relationship between product value and the total cost of ownership with an evaluation of their time variation, considering different usage modes for various consumer groups and different recycling award schemes (fixed and variable recycling awards. Proper take-back management is likely to create a win-win situation both for consumers and environmental protection. This study regards the notebook computer as an example to determine the optimal time for recycling laptops based on usage patterns and provides consumers a reference for when to replace their used product. The results from our modeling firstly clearly indicate that consumers with higher frequency of usage have shorter take back times and higher maximum consumer value. Secondly, a variable recycling award scheme with higher maximum consumer value is more practical than a fixed recycling award scheme.

  3. How to manage uncertainty in future Life Cycle Assessment (LCA) scenarios addressing the effect of climate change in crop production

    DEFF Research Database (Denmark)

    Niero, Monia; Ingvordsen, Cathrine Heinz; Bagger Jørgensen, Rikke

    2015-01-01

    When Life Cycle Assessment (LCA) is used to provide insights on how to pursue future food demand, it faces the challenge to describe scenarios of the future in which the environmental impacts occur. In the case of future crop production, the effects of climate change should be considered. In this......When Life Cycle Assessment (LCA) is used to provide insights on how to pursue future food demand, it faces the challenge to describe scenarios of the future in which the environmental impacts occur. In the case of future crop production, the effects of climate change should be considered....... In this context, the objectives of this paper are two-fold: (i) to recommend an approach to deal with uncertainty in scenario analysis for LCA of crop production in a changed climate, when the goal of the study is to suggest strategies for adaptation of crop cultivation practices towards low environmental impacts...... climate, soil, water loss and production parameters. Secondly, the handling of these factors in the inventory modeling is discussed and finally implemented in the case study. Our approach follows a 3-step procedure consisting of: (1) definition of a baseline scenario at the Life Cycle Inventory (LCI...

  4. Sensitivity analysis in a life cycle assessment of an aged red wine production from Catalonia, Spain.

    Science.gov (United States)

    Meneses, M; Torres, C M; Castells, F

    2016-08-15

    Sustainability in agriculture and food processing is an issue with a clear growing interest; especially in products were consumers have particular awareness regarding its environmental profile. This is the case of wine industry depending on grape production, winemaking and bottling. Also viticulture and generally agricultural production is significantly affected by climate variations. The aim of this article is to determine the environmental load of an aged red wine from a winery in Catalonia, Spain, over its entire life cycle, including sensitivity analysis of the main parameters related to the cultivation, vinification and bottling. The life cycle assessment (LCA) methodology is used for the environmental analysis. In a first step, life cycle inventory (LCI) data were collected by questionnaires and interviews with the winemaker, all data are actual operating data and all the stages involved in the production have been taken into account (viticulture, vinification, bottling and the disposal subsystem). Data were then used to determine the environmental profile by a life cycle impact assessment using the ReCiPe method. Annual variability in environmental performance, stresses the importance of including timeline analysis in the wine sector. Because of that this study is accompanied with a sensitivity analysis carried out by a Monte Carlo simulation that takes into account the uncertainty and variability of the parameters used. In this manner, the results are presented with confidence intervals to provide a wider view of the environmental issues derived from the activities of the studied wine estate regardless of the eventualities of a specific harvesting year. Since the beverage packaging has an important influence in this case, a dataset for the production of green glass was adapted to reflect the actual recycling situation in Spain. Furthermore, a hypothetical variation of the glass-recycling rate in the glass production completes this article, as a key variable

  5. The product life cycle revisited

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    1995-01-01

    Efter et introduktionsafsnit følger afsnit II, hvor der gives en historisk analyse af Life Cycle Assessment (LCA) og Environmental Impact Assessment (EIA). I afsnit III munder analysen ud i en vurdering af ligheder og forskelle mellem LCA analyser og EIA analyser, og en diskussion følger af...

  6. LongerLife products increase the sustainability. Is corrosion protection ecologically useful for steel components?; LongerLife-Produkte erhoehen die Nachhaltigkeit. Ist Korrosionsschutz von Stahlbauteilen oekologisch sinnvoll?

    Energy Technology Data Exchange (ETDEWEB)

    Rogall, Armin Dietmar [Fachhochschule Dortmund (Germany). Fachbereich Architektur

    2011-07-01

    The installation of hot-dip galvanized construction units means sustainable acting. Since corrosion protection by hot-dip galvanizing can be particularly named sustainable due to its longevity, its environmental careful production, its recycling ability and life extension of steel components. Particularly the reduction of the maintenance cycles and utilization costs accompanying with a slightly higher initial investment makes the hot-dip galvanizing a sustainable system. Steel components which are treated with galvanization and colour coating, have a maintenance-free life span of more than 80 years.

  7. Tool life and cutting speed for the maximum productivity at the drilling of the stainless steel X22CrMoV12-1

    Science.gov (United States)

    Vlase, A.; Blăjină, O.; Iacob, M.; Darie, V.

    2015-11-01

    Two addressed issues in the research regarding the cutting machinability, establishing of the optimum cutting processing conditions and the optimum cutting regime, do not yet have sufficient data for solving. For this reason, in the paper it is proposed the optimization of the tool life and the cutting speed at the drilling of a certain stainless steel in terms of the maximum productivity. For this purpose, a nonlinear programming mathematical model to maximize the productivity at the drilling of the steel is developed in the paper. The optimum cutting tool life and the associated cutting tool speed are obtained by solving the numerical mathematical model. Using this proposed model allows increasing the accuracy in the prediction of the productivity for the drilling of a certain stainless steel and getting the optimum tool life and the optimum cutting speed for the maximum productivity. The results presented in this paper can be used in the production activity, in order to increase the productivity of the stainless steels machining. Also new research directions for the specialists in this interested field may come off from this paper.

  8. The economic value of innovative treatments over the product life cycle: the case of targeted trastuzumab therapy for breast cancer.

    Science.gov (United States)

    Garrison, Louis P; Veenstra, David L

    2009-01-01

    Pharmacoeconomic analyses typically project the expected cost-effectiveness of a new product for a specific indication. This analysis develops a dynamic life-cycle model to conduct a multi-indication evaluation using the case of trastuzumab licensed in the United States for both early-stage and metastatic (or late-stage) human epidermal growth factor receptor 2 (HER2)-positive breast cancer therapy (early breast cancer [EBC]; metastatic breast cancer [MBC]), approved in 2006 and 1998, respectively. This dynamic model combined information on expected incremental cost-utility ratios for specific indications with an epidemiologically based projection of utilization by indication over the product life cycle-from 1998 to 2016. Net economic value was estimated as the cumulative quality-adjusted life years (QALYs) gained over the life cycle multiplied by a societal valuation of health gains ($/QALY) minus cumulative net direct treatment costs. Sensitivity analyses were performed under a range of assumptions. We projected that the annual number of EBC patients receiving trastuzumab will be more than three times that of MBC by 2016, in part because adjuvant treatment reduces the future incidence of MBC. Over this life cycle, the estimated overall incremental cost-effectiveness ratio (ICER) was $35,590/QALY with a total of 432,547 discounted QALYs gained. Under sensitivity analyses, the overall ICER varied from $21,000 to $53,000/QALY, and the projected net economic value resulting from trastuzumab treatment ranged from $6.2 billion to $49.5 billion. Average ICERs for multi-indication compounds can increase or decrease over the product life cycle. In this example, the projected overall life-cycle ICER for trastuzumab was less than one half of that in the initial indication. This dynamic perspective-versus the usual static one-highlights the interdependence of drug development decisions and investment incentives, raising important reimbursement policy issues.

  9. Shorter Fallow Cycles Affect the Availability of Noncrop Plant Resources in a Shifting Cultivation System

    Directory of Open Access Journals (Sweden)

    Sarah Paule. Dalle

    2006-12-01

    Full Text Available Shifting cultivation systems, one of the most widely distributed forms of agriculture in the tropics, provide not only crops of cultural significance, but also medicinal, edible, ritual, fuel, and forage resources, which contribute to the livelihoods, health, and cultural identity of local people. In many regions across the globe, shifting cultivation systems are undergoing important changes, one of the most pervasive being a shortening of the fallow cycle. Although there has been much attention drawn to declines in crop yields in conjunction with reductions in fallow times, little if any research has focused on the dynamics of noncrop plant resources. In this paper, we use a data set of 26 fields of the same age, i.e., ~1.5 yr, but differing in the length and frequency of past fallow cycles, to examine the impact of shorter fallow periods on the availability of noncrop plant resources. The resources examined are collected in shifting cultivation fields by the Yucatec Maya in Quintana Roo, Mexico. These included firewood, which is cut from remnant trees and stumps spared at the time of felling, and 17 forage species that form part of the weed vegetation. Firewood showed an overall decrease in basal area with shorter fallow cycles, which was mostly related to the smaller diameter of the spared stumps and trees in short-fallow milpas. In contrast, forage species showed a mixed response. Species increasing in abundance in short-fallow milpas tended to be short-lived herbs and shrubs often with weedy habits, whereas those declining in abundance were predominantly pioneer trees and animal-dispersed species. Coppicing tree species showed a neutral response to fallow intensity. Within the cultural and ecological context of our study area, we expect that declines in firewood availability will be most significant for livelihoods because of the high reliance on firewood for local fuel needs and the fact that the main alternative source of firewood, forest

  10. Exergetic life cycle assessment of hydrogen production from renewables

    Science.gov (United States)

    Granovskii, Mikhail; Dincer, Ibrahim; Rosen, Marc A.

    Life cycle assessment is extended to exergetic life cycle assessment and used to evaluate the exergy efficiency, economic effectiveness and environmental impact of producing hydrogen using wind and solar energy in place of fossil fuels. The product hydrogen is considered a fuel for fuel cell vehicles and a substitute for gasoline. Fossil fuel technologies for producing hydrogen from natural gas and gasoline from crude oil are contrasted with options using renewable energy. Exergy efficiencies and greenhouse gas and air pollution emissions are evaluated for all process steps, including crude oil and natural gas pipeline transportation, crude oil distillation and natural gas reforming, wind and solar electricity generation, hydrogen production through water electrolysis, and gasoline and hydrogen distribution and utilization. The use of wind power to produce hydrogen via electrolysis, and its application in a fuel cell vehicle, exhibits the lowest fossil and mineral resource consumption rate. However, the economic attractiveness, as measured by a "capital investment effectiveness factor," of renewable technologies depends significantly on the ratio of costs for hydrogen and natural gas. At the present cost ratio of about 2 (per unit of lower heating value or exergy), capital investments are about five times lower to produce hydrogen via natural gas rather than wind energy. As a consequence, the cost of wind- and solar-based electricity and hydrogen is substantially higher than that of natural gas. The implementation of a hydrogen fuel cell instead of an internal combustion engine permits, theoretically, an increase in a vehicle's engine efficiency of about of two times. Depending on the ratio in engine efficiencies, the substitution of gasoline with "renewable" hydrogen leads to (a) greenhouse gas (GHG) emissions reductions of 12-23 times for hydrogen from wind and 5-8 times for hydrogen from solar energy, and (b) air pollution (AP) emissions reductions of 38

  11. Minimally invasive oesophagectomy more expensive than open despite shorter length of stay.

    Science.gov (United States)

    Dhamija, Anish; Dhamija, Ankit; Hancock, Jacquelyn; McCloskey, Barbara; Kim, Anthony W; Detterbeck, Frank C; Boffa, Daniel J

    2014-05-01

    The minimally invasive oesophagectomy (MIO) approach offers a number of advantages over open approaches including reduced discomfort, shorter length of stay and a faster recovery to baseline status. On the other hand, minimally invasive procedures typically are longer and consume greater disposable instrumentation, potentially resulting in a greater overall cost. The objective of this study was to compare costs associated with various oesophagectomy approaches for oesophageal cancer. An institutional Resource Information Management System (RIMS) was queried for cost data relating to hospital expenditures (as opposed to billings or collections). The RIMS was searched for patients undergoing oesophagectomy for oesophageal cancer between 2003 and 2012 via minimally invasive, open transthoracic (OTT) (including Ivor Lewis, modified McKeown or thoracoabdominal) or transhiatal approaches. Patients that were converted from minimally invasive to open, or involved hybrid procedures, were excluded. A total of 160 oesophagectomies were identified, including 61 minimally invasive, 35 open transthoracic and 64 transhiatal. Costs on the day of surgery averaged higher in the MIO group ($12 476 ± 2190) compared with the open groups, OTT ($8202 ± 2512, P < 0.0001) or OTH ($5809 ± 2575, P < 0.0001). The median costs associated with the entire hospitalization also appear to be higher in the MIO group ($25 935) compared with OTT ($24 440) and OTH ($15 248). The average length of stay was lowest in the MIO group (11 ± 9 days) compared with OTT (19 ± 18 days, P = 0.006) and OTH (18 ± 28 days P = 0.07). The operative mortality was similar in the three groups (MIO = 3%, OTT = 9% and OTH = 3%). The operating theatre costs associated with minimally invasive oesophagectomy are significantly higher than OTT or OTH approaches. Unfortunately, a shorter hospital stay after MIO does not consistently offset higher surgical expense, as total hospital costs trend higher in the MIO patients. In

  12. The life-cycle research productivity of mathematicians and scientists.

    Science.gov (United States)

    Diamond, A M

    1986-07-01

    Declining research productivity with age is implied by economic models of life-cycle human capital investment but is denied by some recent empirical studies. The purpose of the present study is to provide new evidence on whether a scientist's output generally declines with advancing age. A longitudinal data set has been compiled for scientists and mathematicians at six major departments, including data on age, salaries, annual citations (stock of human capital), citations to current output (flow of human capital), and quantity of current output measured both in number of articles and in number of pages. Analysis of the data indicates that salaries peak from the early to mid-60s, whereas annual citations appear to peak from age 39 to 89 for different departments with a mean age of 59 for the 6 departments. The quantity and quality of current research output appear to decline continuously with age.

  13. Parthenogenetic reproduction of Diaphanosoma celebensis (Crustacea: Cladocera). Effect of algae and algal density on survival, growth, life span and neonate production

    Digital Repository Service at National Institute of Oceanography (India)

    Shrivastava, Y.; Mahambre, G.G.; Achuthankutty, C.T.; Fernandes, Brenda; Goswami, S.C.; Madhupratap, M.

    ) and Tetraselmis gracilis (Kylin), was determined. Growth was faster in the initial stage with all three diets but slowed down in later life. Increased food concentrations resulted in higher neonate production but reduced the life span of females. However, long...

  14. Incorporating uncertainty analysis into life cycle estimates of greenhouse gas emissions from biomass production

    International Nuclear Information System (INIS)

    Johnson, David R.; Willis, Henry H.; Curtright, Aimee E.; Samaras, Constantine; Skone, Timothy

    2011-01-01

    Before further investments are made in utilizing biomass as a source of renewable energy, both policy makers and the energy industry need estimates of the net greenhouse gas (GHG) reductions expected from substituting biobased fuels for fossil fuels. Such GHG reductions depend greatly on how the biomass is cultivated, transported, processed, and converted into fuel or electricity. Any policy aiming to reduce GHGs with biomass-based energy must account for uncertainties in emissions at each stage of production, or else it risks yielding marginal reductions, if any, while potentially imposing great costs. This paper provides a framework for incorporating uncertainty analysis specifically into estimates of the life cycle GHG emissions from the production of biomass. We outline the sources of uncertainty, discuss the implications of uncertainty and variability on the limits of life cycle assessment (LCA) models, and provide a guide for practitioners to best practices in modeling these uncertainties. The suite of techniques described herein can be used to improve the understanding and the representation of the uncertainties associated with emissions estimates, thus enabling improved decision making with respect to the use of biomass for energy and fuel production. -- Highlights: → We describe key model, scenario and data uncertainties in LCAs of biobased fuels. → System boundaries and allocation choices should be consistent with study goals. → Scenarios should be designed around policy levers that can be controlled. → We describe a new way to analyze the importance of covariance between inputs.

  15. Positive Youth Development Life Skills Gained at the Iowa 4-H Youth Conference

    Directory of Open Access Journals (Sweden)

    Brenda S. Allen

    2016-12-01

    Full Text Available Research suggests 4-H programs build Life Skills such as leadership, communication, citizenship and learning. However, 4-H programs vary from long-term on-going experiences to shorter, more intense opportunities. This paper discusses a program evaluation articulating the life skill development of participants in a 3-day residential State 4-H Conference on a Midwestern college campus. The Life Skills assessed were in the areas of leadership, citizenship, communication, and learning as part of overall Life Skill development. Participants were youth ages 14-18 years. A retrospective pretest-posttest was used to evaluate skill development and understanding. Analysis, including paired sample t-tests, indicated growth in each of the 12 common outcome measures evaluated. This study supports the importance of purposeful planning and youth engagement in the learning process to achieve desired life skill outcomes.

  16. Shorter telomeres in peripheral blood mononuclear cells from older persons with sarcopenia: results from an exploratory study

    Directory of Open Access Journals (Sweden)

    Emanuele eMarzetti

    2014-08-01

    Full Text Available Background. Telomere shortening in peripheral blood mononuclear cells (PBMCs has been associated with biological age and several chronic degenerative diseases. However, the relationship between telomere length and sarcopenia, a hallmark of the aging process, is unknown. The aim of the present study was therefore to determine whether PBMC telomeres obtained from sarcopenic older persons were shorter relative to non-sarcopenic peers. We further explored if PBMC telomere length was associated with frailty, a major clinical correlate of sarcopenia.Methods. Analyses were conducted in 142 persons aged >/= 65 years referred to a geriatric outpatient clinic (University Hospital. The presence of sarcopenia was established according to the European Working Group on Sarcopenia in Older People criteria, with bioelectrical impedance analysis used for muscle mass estimation. The frailty status was determined by both the Fried’s criteria (physical frailty, PF and a modified Rockwood’s frailty index (FI. Telomere length was measured in PBMCs by quantitative real-time polymerase chain reaction according to the Telomere/Single copy gene ratio (T/S method.Results. Among 142 outpatients (mean age 75.0 ± 6.5 years, 59.2% women, sarcopenia was diagnosed in 23 individuals (19.3%. The PF phenotype was detected in 74 participants (52.1%. The average FI score was 0.46 ± 0.17. PBMC telomeres were shorter in sarcopenic subjects (T/S = 0.21; 95% CI: 0.18 – 0.24 relative to non-sarcopenic individuals (T/S = 0.26; 95%: CI: 0.24 – 0.28; p = 0.01, independent of age, gender, smoking habit, or comorbidity. No significant associations were determined between telomere length and either PF or FI.Conclusion. PBMC telomere length, expressed as T/S values, is shorter in older outpatients with sarcopenia. The cross-sectional assessment of PBMC telomere length is not sufficient at capturing the complex, multidimensional syndrome of frailty.

  17. Using life cycle assessment in design for environment education of product development staff

    Energy Technology Data Exchange (ETDEWEB)

    Jauhiainen, H. [Vaisala Oyj, Helsinki (Finland); Kaipainen, J.; Ristolainen, E.; Valkama, J. [Tampere Univ. of Technology, Inst. of Electronics, Tampere (Finland)

    2004-07-01

    The environmental information of the whole life cycle of a product is needed in design for environment (DfE). Therefore, LCA results are possible starting points for the DfE, but the results need to be summarized for a company staff in DfE education. The reliability of results must be taken into consideration, particularly when going into the details of a product. Those issues were examined when the manufacturing phase of the product of Vaisala company was assessed using two different LCA software tools and inventory databases. Differences between the methods and data had an influence on differences of the results. Comparing of those differences helped to show the main reliability issues of LCA for the staff. It was found out that as a background the LCA results were sufficient, whereas LCA based design rules needed further simplification of the results. In that connection, reliability issues and increased subjectivity must be emphasized. (orig.)

  18. Life cycle assessment of energy consumption and GHG emissions of olefins production from alternative resources in China

    International Nuclear Information System (INIS)

    Xiang, Dong; Yang, Siyu; Li, Xiuxi; Qian, Yu

    2015-01-01

    Highlights: • Conduct a life cycle energy use and GHG emissions of olefins production processes. • Analyse effects of carbon capture and efficiency on alternative olefins production. • Analyse life cycle performance of Chinese olefins industry in three key periods. • Present the advantages and challenges of alternative olefins routes. - Abstract: Olefins are important platform chemicals widely used in industry. In terms of the short supply of oil resources, natural gas and coal are two significant alternative feedstocks. In this paper, energy consumption and GHG emissions of olefins production are analysed with life cycle assessment methods. Results showed the energy consumption and GHG emissions of natural gas-to-olefins are roughly equivalent to those of oil-to-olefins, while coal-to-olefins suffers from higher energy consumption and serious GHG emissions, including 5793 kg eq. CO 2 /t olefins of direct emissions and 5714 kg eq. CO 2 /t olefins of indirect emissions. To address the problem, the effect of carbon capture on coal-to-olefins is investigated. In comprehensive consideration of energy utilization, environmental impact, and economic benefit, the coal-to-olefins with 80% CO 2 capture of the direct emissions is found to be an appropriate choice. With this carbon capture configuration, the direct emissions of the coal-to-olefins are reduced to 1161 kg eq. CO 2 /t olefins. However, the indirect emissions are still not captured, which should be strictly monitored and significantly reduced. Finally, a scenario analysis is conducted to estimate resource utilization and GHG emissions of olefins production of China in 2020. Several suggestions are also proposed for policy making on the sustainable development of olefins industry

  19. Alternative promoter usage generates novel shorter MAPT mRNA transcripts in Alzheimer's disease and progressive supranuclear palsy brains.

    Science.gov (United States)

    Huin, Vincent; Buée, Luc; Behal, Hélène; Labreuche, Julien; Sablonnière, Bernard; Dhaenens, Claire-Marie

    2017-10-03

    Alternative promoter usage is an important mechanism for transcriptome diversity and the regulation of gene expression. Indeed, this alternative usage may influence tissue/subcellular specificity, protein translation and function of the proteins. The existence of an alternative promoter for MAPT gene was considered for a long time to explain differential tissue specificity and differential response to transcription and growth factors between mRNA transcripts. The alternative promoter usage could explain partly the different tau proteins expression patterns observed in tauopathies. Here, we report on our discovery of a functional alternative promoter for MAPT, located upstream of the gene's second exon (exon 1). By analyzing genome databases and brain tissue from control individuals and patients with Alzheimer's disease or progressive supranuclear palsy, we identified novel shorter transcripts derived from this alternative promoter. These transcripts are increased in patients' brain tissue as assessed by 5'RACE-PCR and qPCR. We suggest that these new MAPT isoforms can be translated into normal or amino-terminal-truncated tau proteins. We further suggest that activation of MAPT's alternative promoter under pathological conditions leads to the production of truncated proteins, changes in protein localization and function, and thus neurodegeneration.

  20. The Effect of Uncertain End-of-Life Product Quality and Consumer Incentives on Partial Disassembly Sequencing in Value Recovery Operations

    OpenAIRE

    Rickli, Jeremy Lewis

    2013-01-01

    This dissertation addresses gaps in the interaction between End-of-Life (EoL) product acquisition systems and disassembly sequencing. The research focuses on two remanufacturing research problems; 1) modeling uncertain EoL product quality, quantity, and timing in regards to EoL product acquisition and disassembly sequencing and 2) designing EoL product acquisition schemes considering EoL product uncertainty. The main research objectives within these areas are; analyzing, predicting, and contr...

  1. Exergetic life cycle assessment of cement production process with waste heat power generation

    International Nuclear Information System (INIS)

    Sui, Xiuwen; Zhang, Yun; Shao, Shuai; Zhang, Shushen

    2014-01-01

    Highlights: • Exergetic life cycle assessment was performed for the cement production process. • Each system’s efficiency before and after waste heat power generation was analyzed. • The waste heat power generation improved the efficiency of each production system. • It provided technical support for the implementation of energy-saving schemes. - Abstract: The cement industry is an industry that consumes a considerable quantity of resources and energy and has a very large influence on the efficient use of global resources and energy. In this study, exergetic life cycle assessment is performed for the cement production process, and the energy efficiency and exergy efficiency of each system before and after waste heat power generation is investigated. The study indicates that, before carrying out a waste heat power generation project, the objective energy efficiencies of the raw material preparation system, pulverized coal preparation system and rotary kiln system are 39.4%, 10.8% and 50.2%, respectively, and the objective exergy efficiencies are 4.5%, 1.4% and 33.7%, respectively; after carrying out a waste heat power generation project, the objective energy efficiencies are 45.8%, 15.5% and 55.1%, respectively, and the objective exergy efficiencies are 7.8%, 2.8% and 38.1%, respectively. The waste heat power generation project can recover 3.7% of the total input exergy of a rotary kiln system and improve the objective exergy efficiencies of the above three systems. The study can identify degree of resource and energy utilization and the energy-saving effect of a waste heat power generation project on each system, and provide technical support for managers in the implementation of energy-saving schemes

  2. Intrinsically disordered segments and the evolution of protein half-life

    Science.gov (United States)

    Babu, M.

    2013-03-01

    Precise turnover of proteins is essential for cellular homeostasis and is primarily mediated by the proteasome. Thus, a fundamental question is: What features make a protein an efficient substrate for degradation? Here I will present results that proteins with a long terminal disordered segment or internal disordered segments have a significantly shorter half-life in yeast. This relationship appears to be evolutionarily conserved in mouse and human. Furthermore, upon gene duplication, divergence in the length of terminal disorder or variation in the number of internal disordered segments results in significant alteration of the half-life of yeast paralogs. Many proteins that exhibit such changes participate in signaling, where altered protein half-life will likely influence their activity. We suggest that variation in the length and number of disordered segments could serve as a remarkably simple means to evolve protein half-life and may serve as an underappreciated source of genetic variation with important phenotypic consequences. MMB acknowledges the Medical Research Council for funding his research program.

  3. Aquatic food production modules in bioregenerative life support systems based on higher plants

    Science.gov (United States)

    Bluem, V.; Paris, F.

    Most bioregenerative life support systems (BLSS) are based on gravitropic higher plants which exhibit growth and seed generation disturbances in microgravity. Even when used for a lunar or martian base the reduced gravity may induce a decreased productivity in comparison to Earth. Therefore, the implementation of aquatic biomass production modules in higher plant and/or hybrid BLSS may compensate for this and offer, in addition, the possibility to produce animal protein for human nutrition. It was shown on the SLS-89 and SLS-90 space shuttle missions with the C.E.B.A.S.-MINI MODULE that the edible non gravitropic rootless higher aquatic plant Ceratophyllum demeresum exhibits an undisturbed high biomass production rate in space and that the teleost fish species, Xiphophorus helleri, adapts rapidly to space conditions without loss of its normal reproductive functions. Based on these findings a series of ground-based aquatic food production systems were developed which are disposed for utilization in space. These are plant production bioreactors for the species mentioned above and another suitable candidate, the lemnacean (duckweed) species, Wolffia arrhiza. Moreover, combined intensive aquaculture systems with a closed food loop between herbivorous fishes and aquatic and land plants are being developed which may be suitable for integration into a BLSS of higher complexity.

  4. Life-cycle energy production and emissions mitigation by comprehensive biogas-digestate utilization.

    Science.gov (United States)

    Chen, Shaoqing; Chen, Bin; Song, Dan

    2012-06-01

    In the context of global energy shortages and climate change, developing biogas plants with links to agricultural system has become an important strategy for cleaner rural energy and renewable agriculture. In this study, a life-cycle energy and environmental assessment was performed for a biogas-digestate utilization system in China. The results suggest that biogas utilization (heating, illumination, and fuel) and comprehensive digestate reuse are of equal importance in the total energy production of the system, and they also play an important role in systemic greenhouse gas mitigation. Improvement can be achieved in both energy production and emissions mitigation when the ratio of the current three biogas utilization pathways is adjusted. Regarding digestate reuse, a tradeoff between energy and environmental performance can be obtained by focusing on the substitution for top-dressing, base fertilizers, and the application to seed soaking. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. United States Food and Drug Administration and Department of Defense shelf-life extension program of pharmaceutical products: progress and promise.

    Science.gov (United States)

    Khan, Saeed R; Kona, Ravikanth; Faustino, Patrick J; Gupta, Abhay; Taylor, Jeb S; Porter, Donna A; Khan, Mansoor

    2014-05-01

    The Department of Defense (DoD)-United States Food and Drug Administration (FDA) shelf-life extension program (SLEP) was established in 1986 through an intra-agency agreement between the DoD and the FDA to extend the shelf life of product nearing expiry. During the early stages of development, special attention was paid to program operation, labeling requirements, and the cost benefits associated with this program. In addition to the substantial cost benefits, the program also provides the FDA's Center for Drug Evaluation and Research with significant scientific understanding and pharmaceutical resource. As a result of this unique resource, numerous regulatory research opportunities to improve public health present themselves from this distinctive scientific database, which includes examples of products shelf life, their long-term stability issues, and various physical and chemical tests to identify such failures. The database also serves as a scientific resource for mechanistic understanding and identification of test failures leading to the development of new formulations or more robust packaging. It has been recognized that SLEP is very important in maintaining both national security and public welfare by confirming that the stockpiled pharmaceutical products meet quality standards after the "expiration date" assigned by the sponsor. SLEP research is an example of regulatory science that is needed to best ensure product performance past the original shelf life. The objective of this article is to provide a brief history and background and most importantly the public health benefits of the SLEP. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  6. Methods of dealing with co-products of biofuels in life-cycle analysis and consequent results within the U.S. context

    International Nuclear Information System (INIS)

    Wang, Michael; Huo Hong; Arora, Salil

    2011-01-01

    Products other than biofuels are produced in biofuel plants. For example, corn ethanol plants produce distillers' grains and solubles. Soybean crushing plants produce soy meal and soy oil, which is used for biodiesel production. Electricity is generated in sugarcane ethanol plants both for internal consumption and export to the electric grid. Future cellulosic ethanol plants could be designed to co-produce electricity with ethanol. It is important to take co-products into account in the life-cycle analysis of biofuels and several methods are available to do so. Although the International Standard Organization's ISO 14040 advocates the system boundary expansion method (also known as the 'displacement method' or the 'substitution method') for life-cycle analyses, application of the method has been limited because of the difficulty in identifying and quantifying potential products to be displaced by biofuel co-products. As a result, some LCA studies and policy-making processes have considered alternative methods. In this paper, we examine the available methods to deal with biofuel co-products, explore the strengths and weaknesses of each method, and present biofuel LCA results with different co-product methods within the U.S. context.

  7. Methods of dealing with co-products of biofuels in life-cycle analysis and consequent results within the U.S. context

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Michael, E-mail: mqwang@anl.gov [Center for Transportation Research, Argonne National Laboratory, Argonne, IL 60439 (United States); Huo Hong [Institute of Energy, Environment, and Economics, Tsinghua University, Beijing, 100084 (China); Arora, Salil [Center for Transportation Research, Argonne National Laboratory, Argonne, IL 60439 (United States)

    2011-10-15

    Products other than biofuels are produced in biofuel plants. For example, corn ethanol plants produce distillers' grains and solubles. Soybean crushing plants produce soy meal and soy oil, which is used for biodiesel production. Electricity is generated in sugarcane ethanol plants both for internal consumption and export to the electric grid. Future cellulosic ethanol plants could be designed to co-produce electricity with ethanol. It is important to take co-products into account in the life-cycle analysis of biofuels and several methods are available to do so. Although the International Standard Organization's ISO 14040 advocates the system boundary expansion method (also known as the 'displacement method' or the 'substitution method') for life-cycle analyses, application of the method has been limited because of the difficulty in identifying and quantifying potential products to be displaced by biofuel co-products. As a result, some LCA studies and policy-making processes have considered alternative methods. In this paper, we examine the available methods to deal with biofuel co-products, explore the strengths and weaknesses of each method, and present biofuel LCA results with different co-product methods within the U.S. context.

  8. Inventory Data on Commercial Broiler Chicken Production System using Life Cycle Assessment Approach: A Case Study

    Science.gov (United States)

    Suffian, S. A.; Sidek, A. A.; Yusof, H. M.; Al-Hazza, M. H. F.

    2018-01-01

    An inventory analysis of the life cycle of broiler chicken production from cradle-to-gate perspective was carried out with the aim to identify possible input and output parameters involved in the system. To do so, broiler chicken production in Myra Chicken Farm and Services was investigated in detail. Result shows the inventory data on feed consumption, transportation, physical performance parameter and other utilities that affect the product which is broilers. Broilers production in fact shows escalation year by year because of high demand from consumer. A cradle-to-gate assessment was conducted based on ISO 14040/14044 guidelines. Inventory data was gathered from farmers and available literature. Improving all the input and output system will increase the level of productivity and the cost of the production. Thus, at the end of the research, it will able to make industry player to understand and take into consideration the solutions in order to promote a green broiler chicken production.

  9. Green energy criteria and life cycle assessment in assessing environmental competitiveness of energy products

    International Nuclear Information System (INIS)

    Maelkki, H.; Hongisto, M.; Turkulainen, T.; Kuisma, J.; Loikkanen, T.

    1999-01-01

    The liberalisation of energy markets has increased the need to enlarge the information base of fuel chains, to evaluate the environmental quality of energy products transparently and to communicate results in a credible way. The preparedness of energy purchasers, producers and sellers to support energy choices of their customers and to meet the information requirements of various stake holders can be strengthened. The environmental impacts related to energy products are turning into a significant dimension of competitiveness. Possibilities to promote market-driven environmental protection mechanisms and to construct incentives, which cover the whole energy production system exist and can be supported. Knowledge of environmental impacts of various energy products can be increased by means of several supplementary instruments like eco-profiles, environmental labels and life cycle assessments of products. Life cycle assessment forms a systematic basis of information, which supports the environmental communications directed to various stake holders. In this study selected public LCA-studies concerning energy production have been compared, criteria of green energy have been charted and their outlook has been assessed. In addition the development of an LCA- based relative environmental performance indicator system, which supports various transparent comparisons, has been outlined. The mapping of methodological differences of published LCA-studies regarding various energy alternatives proves, that there is differences e.g. in allocation principles, system boundaries, and age of source information and in many other details. These discrepancies should be known, because they also affect the results. That is why the use of available LCA studies as a basis for comparative assertions may be problematic. The renewability of an energy source is a threshold requirement in eco-energy criteria formulated and introduced by Finnish, Swedish and Norwegian nature conservation

  10. Quantification of the Impact of Endometriosis Symptoms on Health Related Quality of Life and Work Productivity

    Science.gov (United States)

    Fourquet, Jessica; Báez, Lorna; Figueroa, Michelle; Iriarte, R. Iván; Flores, Idhaliz

    2011-01-01

    OBJECTIVE To quantify the impact of endometriosis-related symptoms on physical and mental health status, health-related quality of life (HRQoL), and work-related aspects (absenteeism, presenteeism, work productivity, activity impairment). DESIGN Cross-sectional quantitative study. SETTING Academic and research institution. PATIENT(S) Women (n=193) with self-reported surgically diagnosed endometriosis from the Endometriosis Patient Registry at Ponce School of Medicine and Health Sciences (PSMHS). INTERVENTION(S) Patients completed an anonymous questionnaire divided into three sections consisting of questions from the Patient Health Survey (SF-12®), the Endometriosis Health Profile (EHP-5), and the Work Productivity and Activity Impairment Survey (WPAI). MAIN OUTCOME MEASURE(S) Impact of endometriosis symptoms on physical and mental health status, health-related quality of life (HRQoL), absenteeism, presenteeism, work productivity and activity impairment was quantified. RESULTS Patients had SF-12 scores denoting significant disability in the phyisical and mental health components. They also reported an average of 7.41 hrs (approximately one working day) of work time loss during the week the symptoms are worse. In addition, WPAI scores show high impact on work-related domains: 13% of average loss in work time (absenteeism), 65% of their work was impaired (presenteeism), 64% loss in efficiency levels (work productivity loss), and 60% of daily activities perturbed (activity impairment). CONCLUSION Endometriosis symptoms such as chronic, incapacitating pelvic pain and infertility negatively and substantially impact the physical and mental health status, HRQoL, and productivity at work of patients with endometriosis. PMID:21621771

  11. Indirect water management through Life Cycle Assessment: Fostering sustainable production in developing countries

    Science.gov (United States)

    Pfister, S.; Bayer, P.; Koehler, A.; Hellweg, S.

    2009-04-01

    Life Cycle Assessment (LCA) represents a methodological framework for analyzing the total environmental impact of any product or service of our daily life. After tracking all associated emissions and the consumption of resources, this impact is expressed with respect to a few common impact categories. These are supposed to reflect major societal and environmental priorities. However, despite their central role in environmental processes, to date hydrological as well as hydrogeological aspects are only rarely considered in LCA. Compared with standard impact categories within LCA, water is special. In contrast to other abiotic resources such as crude oil, it can be replenished. Total freshwater resources are immense, but not evenly distributed and often scarce in regions of high demand. Consequently, threads to natural water bodies have immense spatial dependency. Setting up functional relationships in order to derive a generally valid and practicable evaluation is tedious due to the complex, insufficiently understood, and uncertain natural processes involved. LCA that includes the environmental effects of water consumption means global indirect water resource management. It supports goal-directed consumer behaviour that aims to reduce pressure on natural water systems. By developing a hydrologically-based assessment of potential impacts from human interaction with natural water bodies, "greener" products can be prioritised. More sustainable and environmentally friendly water management is the result. The proposed contribution presents an operational assessment method of global surface water consumption for impacts on human health and ecosystem quality within a LCA framework. A major focus is the issue of how such global assessment helps to quantify potential impacts from water-intensive production in developing countries, where the means for proper water management are often limited. We depict a compensation scheme for impacts related to water consumption that

  12. Optimization of a shorter variable-acquisition time for legs to achieve true whole-body PET/CT images.

    Science.gov (United States)

    Umeda, Takuro; Miwa, Kenta; Murata, Taisuke; Miyaji, Noriaki; Wagatsuma, Kei; Motegi, Kazuki; Terauchi, Takashi; Koizumi, Mitsuru

    2017-12-01

    The present study aimed to qualitatively and quantitatively evaluate PET images as a function of acquisition time for various leg sizes, and to optimize a shorter variable-acquisition time protocol for legs to achieve better qualitative and quantitative accuracy of true whole-body PET/CT images. The diameters of legs to be modeled as phantoms were defined based on data derived from 53 patients. This study analyzed PET images of a NEMA phantom and three plastic bottle phantoms (diameter, 5.68, 8.54 and 10.7 cm) that simulated the human body and legs, respectively. The phantoms comprised two spheres (diameters, 10 and 17 mm) containing fluorine-18 fluorodeoxyglucose solution with sphere-to-background ratios of 4 at a background radioactivity level of 2.65 kBq/mL. All PET data were reconstructed with acquisition times ranging from 10 to 180, and 1200 s. We visually evaluated image quality and determined the coefficient of variance (CV) of the background, contrast and the quantitative %error of the hot spheres, and then determined two shorter variable-acquisition protocols for legs. Lesion detectability and quantitative accuracy determined based on maximum standardized uptake values (SUV max ) in PET images of a patient using the proposed protocols were also evaluated. A larger phantom and a shorter acquisition time resulted in increased background noise on images and decreased the contrast in hot spheres. A visual score of ≥ 1.5 was obtained when the acquisition time was ≥ 30 s for three leg phantoms, and ≥ 120 s for the NEMA phantom. The quantitative %errors of the 10- and 17-mm spheres in the leg phantoms were ± 15 and ± 10%, respectively, in PET images with a high CV (scan mean SUV max of three lesions using the current fixed-acquisition and two proposed variable-acquisition time protocols in the clinical study were 3.1, 3.1 and 3.2, respectively, which did not significantly differ. Leg acquisition time per bed position of even 30-90

  13. Life-cycle assessment of eucalyptus short-rotation coppices for bioenergy production in Southern France

    OpenAIRE

    Gabrielle , Benoit; Nguyen The , Nicolas; Maupu , Pauline; Vial , Estelle

    2011-01-01

    Short rotation coppices (SRCs) are considered prime candidates for biomass production, yielding good-quality feedstock that is easy to harvest. Besides technical, social and economical aspects, environmental issues are important to take into account when developing SRCs. Here, we evaluated the environmental impacts of delivering 1 GJ of heat from eucalyptus SRC using life cycle assessment (LCA), based on management scenarios involving different rotations lengths, fertilizer input rates, stem ...

  14. Energy-efficient routes for the production of gasoline from biogas and pyrolysis oil—process design and life-cycle assessment

    NARCIS (Netherlands)

    Sundaram, S.; Kolb, G.A.; Hessel, V.; Wang, Q.

    2017-01-01

    Two novel routes for the production of gasoline from pyrolysis oil (from timber pine) and biogas (from ley grass) are simulated, followed by a cradle-to-gate life-cycle assessment of the two production routes. The main aim of this work is to conduct a holistic evaluation of the proposed routes and

  15. Engineering Bereitschaft as an enabler for Concurrent Engineering

    DEFF Research Database (Denmark)

    Christiansen, Kåre; Vesterager, Johan

    1999-01-01

    Industrial companies observe a general trend towards more customised products and shorter product life cycles. Furthermore, the market demands shorter lead-time and high-quality products at a competitive price. Concurrent Engineering address these challenges. Product modelling is a key aspect...... of the Concurrent Engineering literature. One problem with the product modelling literature is that it tends to assume that product development is revolutionary. Very often product development is evolutionary and it means that product modelling should have a major emphasis on reuse. In this paper it is suggested...... that industrial companies should develop an engineering development Bereitschaft (preparatory engineering knowledge) as an approach to Concurrent Engineering and product modelling. To develop such an engineering development Bereitschaft, a company must develop company generic product models.This paper...

  16. Preliminary study of the effect of gamma irradiation on the vase life of Iridaceae Hollandica

    Science.gov (United States)

    Dennis, S.; Fisher, L.; Ware, C.; Giraldo, C. H. C.

    2018-03-01

    The vase life of irises (Iridaceae Hollandica 'Telstar') was determined before and after gamma irradiation in the Missouri S&T Research Reactor (MSTR) at 20, 80, 457, 1060, and 1473 Gy. It was determined that vase life improves by as much as 7% for the 20 Gy irradiation. At about 100 Gy the vase life is comparable to non-irradiated flowers. Unfortunately pest control requires 200-300 Gy. At 457 Gy the vase life is about 15% shorter, and it gets worse at higher doses (30% lower vase life at 1 kGy). Gamma irradiation of irises can be a viable method of pest control, but the irradiation dose should be kept as low as possible while still achieving the phytosanitary objectives depending on the type of pest to control.

  17. Social impact assessment of sugar production operations in South Africa : a social life cycle assessment perspective

    OpenAIRE

    2013-01-01

    M.Tech. (Quality and Operations Management) This paper focuses on the social impact of the sugar industry in South Africa. A social impact assessment is a method that aims to assess social features of the product and their positive and negative aspects in terms of its processing of raw material to the final stages of its disposal. The objectives of the study were guided by the guidelines on social life cycle assessment of products of the South African Sugar Industry developed by the United...

  18. Life cycle energy efficiency and environmental impact assessment of bioethanol production from sweet potato based on different production modes

    Science.gov (United States)

    Zhang, Jun; Jia, Chunrong; Wu, Yi; Xi, Beidou; Wang, Lijun; Zhai, Youlong

    2017-01-01

    The bioethanol is playing an increasingly important role in renewable energy in China. Based on the theory of circular economy, integration of different resources by polygeneration is one of the solutions to improve energy efficiency and to reduce environmental impact. In this study, three modes of bioethanol production were selected to evaluate the life cycle energy efficiency and environmental impact of sweet potato-based bioethanol. The results showed that, the net energy ratio was greater than 1 and the value of net energy gain was positive in the three production modes, in which the maximum value appeared in the circular economy mode (CEM). The environment emission mainly occurred to bioethanol conversion unit in the conventional production mode (CPM) and the cogeneration mode (CGM), and eutrophication potential (EP) and global warming potential (GWP) were the most significant environmental impact category. While compared with CPM and CGM, the environmental impact of CEM significantly declined due to increasing recycling, and plant cultivation unit mainly contributed to EP and GWP. And the comprehensive evaluation score of environmental impact decreased by 73.46% and 23.36%. This study showed that CEM was effective in improving energy efficiency, especially in reducing the environmental impact, and it provides a new method for bioethanol production. PMID:28672044

  19. LIFE CYCLE ASSESSMENT AND HAZARD ANALYSIS AND CRITICAL CONTROL POINTS TO THE PASTA PRODUCT

    Directory of Open Access Journals (Sweden)

    Yulexis Meneses Linares

    2016-10-01

    Full Text Available The objective of this work is to combine the Life Cycle Assessment (LCA and Hazard Analysis and Critical Control Points (HACCP methodologies for the determination of risks that the food production represents to the human health and the ecosystem. The environmental performance of the production of pastas in the “Marta Abreu” Pasta Factory of Cienfuegos is assessed, where the critical control points determined by the biological dangers (mushrooms and plagues and the physical dangers (wood, paper, thread and ferromagnetic particles were the raw materials: flour, semolina and its mixtures, and the disposition and extraction of them. Resources are the most affected damage category due to the consumption of fossil fuels.

  20. Modality effects in Second Life: the mediating role of social presence and the moderating role of product involvement.

    Science.gov (United States)

    Jin, Seung-A Annie

    2009-12-01

    The rapid growth of virtual worlds is one of the most recent Internet trends. Some distinguishing features of virtual environments include the employment of avatars and multimodal communication among avatars. This study examined the effects of the modality (text vs. audio) of message presentation on people's evaluation of spokes-avatar credibility and the informational value of promotional messages in avatar-based advertising inside 3D virtual environments. An experiment was conducted in the virtual Apple retail store inside Second Life, the most popular and fastest growing virtual world. The author designed a two-group (textual advertisement vs. auditory advertisement) comparison experiment by manipulating the modality of conveying advertisement messages. The author also created a spokes-avatar that represents a real-life organization (Apple) and presents promotional messages about its innovative product, the iPhone. Data analyses showed that (a) textual modality (vs. auditory modality) resulted in greater source expertise, informational value of the advertisement message, and social presence; and that (b) high product involvement (vs. low product involvement) resulted in a more positive attitude toward the product, higher buying intention, and a higher level of perceived interactivity. In addition to the main effects of product involvement and modality, results showed significant interaction between involvement and modality. Modality effects were stronger for people with low product involvement than for those with high product involvement, thus confirming the moderating effects of product involvement. Results of a path analysis also showed that social presence mediated the effects of modality on the perceived informational value of the advertisement message.

  1. Life history comparison of two terrestrial isopods in relation to habitat specialization

    Science.gov (United States)

    Quadros, Aline Ferreira; Caubet, Yves; Araujo, Paula Beatriz

    2009-03-01

    For many animal species, there is a relationship between life history strategies, as predicted by the r- K-selection theory, degree of habitat specialization and response to habitat alteration and loss. Here we compare two sympatric woodlice species with contrasting patterns of habitat use and geographical distribution. We predict that Atlantoscia floridana (Philosciidae), considered a habitat generalist, would exhibit the r-selected traits, whereas Balloniscus glaber (Balloniscidae), considered a habitat specialist, should have the K-selected traits. We analyzed several life history traits as well as life and fecundity tables using 715 and 842 females of A. floridana and B. glaber, respectively, from populations living in syntopy in southern Brazil. As predicted, most evaluated traits allow A. floridana to be considered an r-strategist and B. glaber a K-strategist: A. floridana showed a shorter lifetime, faster development, earlier reproduction, a smaller parental investment, higher net reproductive rate ( R0), a higher growth rate ( r) and a shorter generation time ( T) in comparison to B. glaber. A. floridana seems to be a successful colonizer with a high reproductive output. These characteristics explain its local abundance, commonness and wide geographical distribution. On the contrary, B. glaber has a restricted geographical distribution that is mainly associated with Atlantic forest fragments, a biome threatened by deforestation and replacement by monocultures. Its narrow distribution combined with the K-selected traits may confer to this species an increased extinction risk.

  2. Characterization of heavy users of skin care products among Norwegian women from 2003 to 2011.

    Science.gov (United States)

    Aniansson, Boel; Veierød, Marit B; Rylander, Charlotta; Lund, Eiliv; Sandanger, Torkjel M

    2016-01-01

    Several ingredients in personal care products (PCPs) have been classified as endocrine disruptors (EDs) and concern has been raised whether use of PCPs can affect human health. We aimed to characterize Norwegian female users of skin care products and compare life style characteristics between heavy users and non-users. This cross-sectional study consisted of 114 202 women (age 41-76 years) participating in the Norwegian Women and Cancer study, a large population-based prospective cohort study. Based on self-reported questionnaire data, we classified the study subjects into five groups according to a calculated percentage of skin area creamed per day. Life-style characteristics were then compared between heavy users (using body lotion twice a day) and non-users. Change in use from 2003 to 2011 was assessed through repeated measurements ( n  = 8484). Heavy users of skin care products had a significantly lower BMI, higher level of physical activity, higher income, higher alcohol consumption, fewer children and a shorter total time of breastfeeding than non-users ( p  skin care products was, to a moderate extent (weighted kappa 0.52), consistent over time from 2003 to 2011, and as many as 91.5% of the women were classified into the same user group ±1 category in 2003 and 2011. Heavy users of skin care products differ significantly from non-users on BMI, degree of daily physical activity, income, number of children, use of hormonal pharmaceuticals, smoking and alcohol consumption. Use of skin care products is common among women aged 41-76 years in Norway, and the use is consistent over time.

  3. Unemployment, disability and life expectancy in the United States: A life course study.

    Science.gov (United States)

    Laditka, James N; Laditka, Sarah B

    2016-01-01

    Unemployment may be associated with health through factors including stress, depression, unhealthy behaviors, reduced health care, and loss of social networks. Little is known about associations of total lifetime unemployment with disability and life expectancy. People with high unemployment (≥the median) will live shorter lives with more disability than those with less unemployment. Data were nationally representative of African Americans and non-Hispanic whites, from the Panel Study of Income Dynamics (37 waves 1968-2011, n = 7,970, mean work years = 24.7). Seven waves (1999-2011, 58,268 person-years) measured disability in activities of daily living. We estimated monthly probabilities of disability and death associated with unemployment using multinomial logistic Markov models adjusted for age, sex, race/ethnicity, education, health status at baseline and throughout work life, and social support. We used the probabilities to create large populations with microsimulation, each individual having known monthly disability status, age 40 to death. We analyzed the populations to measure outcomes. Respectively for African American and white women and African American and white men, life expectancies (with 95% confidence intervals) from age 40 with low unemployment were ages: 77.1 (75.0-78.3), 80.6 (78.4-81.4), 71.4 (69.6-72.5), and 76.9 (74.9-77.9). Corresponding high unemployment results were: 73.7 (71.7-75.0), 77.5 (75.1-78.0), 68.4 (66.8-69.0), and 73.7 (71.5-74.3). The percentage of life disabled from age 40 was greater with high unemployment for the same groups, by 23.9%, 21.0%, 21.3%, and 21.1% (all p unemployment may be associated with a larger proportion of later life with disability and lower life expectancy. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Improving Students' Argumentation Skills through a Product Life-Cycle Analysis Project in Chemistry Education

    Science.gov (United States)

    Juntunen, M. K.; Aksela, M. K.

    2014-01-01

    The aim of the study discussed in this paper was to link existing research about the argumentation skills of students to the teaching of life-cycle analysis (LCA) in order to promote an evidence-based approach to the teaching of and learning about materials used in consumer products. This case-study is part of a larger design research project that…

  5. Farm and product carbon footprints of China's fruit production--life cycle inventory of representative orchards of five major fruits.

    Science.gov (United States)

    Yan, Ming; Cheng, Kun; Yue, Qian; Yan, Yu; Rees, Robert M; Pan, Genxing

    2016-03-01

    Understanding the environmental impacts of fruit production will provide fundamental information for policy making of fruit consumption and marketing. This study aims to characterize the carbon footprints of China's fruit production and to figure out the key greenhouse gas emissions to cut with improved orchard management. Yearly input data of materials and energy in a full life cycle from material production to fruit harvest were obtained via field visits to orchards of five typical fruit types from selected areas of China. Carbon footprint (CF) was assessed with quantifying the greenhouse gas emissions associated with the individual inputs. Farm and product CFs were respectively predicted in terms of land use and of fresh fruit yield. Additionally, product CFs scaled by fruit nutrition value (vitamin C (Vc) content) and by the economic benefit from fruit production were also evaluated. The estimated farm CF ranged from 2.9 to 12.8 t CO2-eq ha(-1) across the surveyed orchards, whereas the product CF ranged from 0.07 to 0.7 kg CO2-eq kg(-1) fruit. While the mean product CFs of orange and pear were significantly lower than those of apple, banana, and peach, the nutrition-scaled CF of orange (0.5 kg CO2-eq g(-1) Vc on average) was significantly lower than others (3.0-5.9 kg CO2-eq g(-1) Vc). The income-scaled CF of orange and pear (1.20 and 1.01 kg CO2-eq USD(-1), respectively) was higher than apple, banana, and peach (0.87~0.39 kg CO2-eq USD(-1)). Among the inputs, synthetic nitrogen fertilizer contributed by over 50 % to the total greenhouse gas (GHG) emissions, varying among the fruit types. There were some tradeoffs in product CFs between fruit nutrition value and fruit growers' income. Low carbon production and consumption policy and marketing mechanism should be developed to cut down carbon emissions from fruit production sector, with balancing the nutrition value, producer's income, and climate change mitigation.

  6. Development with DMU. Options in the modern product life cycle; Entwicklung mit DMU. Moeglichkeiten im modernen Produktlebenszyklus

    Energy Technology Data Exchange (ETDEWEB)

    Hoehn, H.; Moser, H. [Competent Engineering GmbH, Graz (Austria)

    2005-02-01

    In this contribution, the Graz-based development company Competent Engineering outlines the advantages of digital mock-ups for efficient product development. The focus is on a uniform product and data structure that is to ensure early availability of DMU for all stages of the product life cycle. (orig.) [German] Der Grazer Entwicklungsdienstleister Competent Engineering beschreibt in diesem Beitrag anhand der Entwicklung eines Ottomotors, welche Vorteile der Einsatz von Digital Mock-Ups fuer eine effiziente Produktentwicklung hat. Besondere Bedeutung hat dabei eine moeglichst durchgaengige Produkt- und Datenstruktur, um eine fruehe Verfuegbarkeit der DMUs fuer alle Bereiche innerhalb des Produktlebenszyklus zu ermoeglichen. (orig.)

  7. The maximization of the productivity of aquatic plants for use in controlled ecological life support systems (CELSS)

    Science.gov (United States)

    Thompson, B. G.

    Lemna minor (common duckweed) and a Wolffia sp. were grown in submerged growth systems. Submerged growth increased the productivity/unit volume (P/UV) of the organisms and may allow these plants to be used in a controlled ecological life support system (CELSS).

  8. A Technique to Perfuse Cadavers that Extends the Useful Life of Fresh Tissues: The Duke Experience

    Science.gov (United States)

    Messmer, Caroline; Kellogg, Ryan T.; Zhang, Yixin; Baiak, Andresa; Leiweke, Clinton; Marcus, Jeffrey R.; Levin, L. Scott; Zenn, Michael R.; Erdmann, Detlev

    2010-01-01

    The demand for laboratory-based teaching and training is increasing worldwide as medical training and education confront the pressures of shorter training time and rising costs. This article presents a cost-effective perfusion technique that extends the useful life of fresh tissue. Refrigerated cadavers are preserved in their natural state for up…

  9. Life cycle assessment of Italian citrus-based products. Sensitivity analysis and improvement scenarios.

    Science.gov (United States)

    Beccali, Marco; Cellura, Maurizio; Iudicello, Maria; Mistretta, Marina

    2010-07-01

    Though many studies concern the agro-food sector in the EU and Italy, and its environmental impacts, literature is quite lacking in works regarding LCA application on citrus products. This paper represents one of the first studies on the environmental impacts of citrus products in order to suggest feasible strategies and actions to improve their environmental performance. In particular, it is part of a research aimed to estimate environmental burdens associated with the production of the following citrus-based products: essential oil, natural juice and concentrated juice from oranges and lemons. The life cycle assessment of these products, published in a previous paper, had highlighted significant environmental issues in terms of energy consumption, associated CO(2) emissions, and water consumption. Starting from such results the authors carry out an improvement analysis of the assessed production system, whereby sustainable scenarios for saving water and energy are proposed to reduce environmental burdens of the examined production system. In addition, a sensitivity analysis to estimate the effects of the chosen methods will be performed, giving data on the outcome of the study. Uncertainty related to allocation methods, secondary data sources, and initial assumptions on cultivation, transport modes, and waste management is analysed. The results of the performed analyses allow stating that every assessed eco-profile is differently influenced by the uncertainty study. Different assumptions on initial data and methods showed very sensible variations in the energy and environmental performances of the final products. Besides, the results show energy and environmental benefits that clearly state the improvement of the products eco-profile, by reusing purified water use for irrigation, using the railway mode for the delivery of final products, when possible, and adopting efficient technologies, as the mechanical vapour recompression, in the pasteurisation and

  10. Modeling low-temperature serpentinization reactions to estimate molecular hydrogen production with implications for potential microbial life on Saturn's moon Enceladus.

    Science.gov (United States)

    Zwicker, Jennifer; Smrzka, Daniel; Taubner, Ruth-Sophie; Bach, Wolfgang; Rittmann, Simon; Schleper, Christa; Peckmann, Jörn

    2017-04-01

    Serpentinization of ultramafic rocks attracts much interest in research on the origin of life on Earth and the search for life on extraterrestrial bodies including icy moons like Enceladus. Serpentinization on Earth occurs in peridotite-hosted systems at slow-spreading mid-ocean ridges, and produces large amounts of molecular hydrogen and methane. These reduced compounds can be utilized by diverse chemosynthetic microbial consortia as a metabolic energy source. Although many hydrothermal vents emit hot and acidic fluids today, it is more likely that life originated in the Archean at sites producing much cooler and more alkaline fluids that allowed for the synthesis and stability of essential organic molecules necessary for life. Therefore, a detailed understanding of water-rock interaction processes during low-temperature serpentinization is of crucial importance in assessing the life-sustaining potential of these environments. In the course of serpentinization, the metasomatic hydration of olivine and pyroxene produces various minerals including serpentine minerals, magnetite, brucite, and carbonates. Hydrogen production only occurs if ferrous iron within iron-bearing minerals is oxidized and incorporated as ferric iron into magnetite. The PHREEQC code was used to model the pH- and temperature-dependent dissolution of olivine and pyroxene to form serpentine, magnetite and hydrogen under pressure and temperature conditions that may exist on Saturn's icy moon Enceladus. Various model setups at 25 and 50°C were run to assess the influence of environmental parameters on hydrogen production. The results reveal that hydrogen production rates depend on the composition of the initial mineral assemblage and temperature. The current assumption is that there is a gaseous phase between Enceladus' ice sheet and subsurface ocean. To test various scenarios, model runs were conducted with and without the presence of a gas phase. The model results show that hydrogen production is

  11. Tools and Strategies for Product Life Cycle Management ñ A Case Study in Foundry

    Science.gov (United States)

    Patil, Rajashekar; Kumar, S. Mohan; Abhilash, E.

    2012-08-01

    Advances in information and communication technology (ICT) have opened new possibilities of collaborations among the customers, suppliers, manufactures and partners to effectively tackle various business challenges. Product Life Cycle Management(PLM) has been a proven approach for Original Equipment Manufacturers (OEMs) to increase their productivity, improve their product quality, speed up delivery, and increase their profit and to become more efficient. However, their Tier 2 and Tier 3 suppliers like foundry industries are still in their infancy without adopting PLM. Hence to enhance their understanding, the basic concepts, the tools and strategies for PLM are presented is this paper. By selecting and implementing appropriate PLM strategies in a small foundry, an attempt was also made to understand the immediate benefits of using PLM tools (commercial PLM software and digital manufacturing tools). This study indicated a reduction in lead time and improved utilization of organizational resources in the production of automobile impeller. These observations may be further extrapolated to other multiproduct, multi-discipline and multi-customer companies to realize the advantages of using PLM technology

  12. Shorter Leukocyte Telomere Length in Relation to Presumed Nonalcoholic Fatty Liver Disease in Mexican-American Men in NHANES 1999–2002

    Directory of Open Access Journals (Sweden)

    Janet M. Wojcicki

    2017-01-01

    Full Text Available Leukocyte telomere length is shorter in response to chronic disease processes associated with inflammation such as diabetes mellitus and coronary artery disease. Data from the National Health and Nutrition Examination Survey (NHANES from 1999 to 2002 was used to explore the relationship between leukocyte telomere length and presumed NAFLD, as indicated by elevated serum alanine aminotransferase (ALT levels, obesity, or abdominal obesity. Logistic regression models were used to evaluate the relationship between telomere length and presumed markers of NAFLD adjusting for possible confounders. There was no relationship between elevated ALT levels, abdominal obesity, or obesity and telomere length in adjusted models in NHANES (OR 1.13, 95% CI 0.48–2.65; OR 1.17, 95% CI 0.52–2.62, resp.. Mexican-American men had shorter telomere length in relation to presumed NAFLD (OR 0.07, 95% CI 0.006–0.79 and using different indicators of NAFLD (OR 0.012, 95% CI 0.0006–0.24. Mexican origin with presumed NAFLD had shorter telomere length than men in other population groups. Longitudinal studies are necessary to evaluate the role of telomere length as a potential predictor to assess pathogenesis of NALFD in Mexicans.

  13. Benefit-Risk Assessment, Communication, and Evaluation (BRACE) throughout the life cycle of therapeutic products : overall perspective and role of the pharmacoepidemiologist

    NARCIS (Netherlands)

    Radawski, Christine; Morrato, Elaine; Hornbuckle, Kenneth; Bahri, Priya; Smith, Meredith; Juhaeri, Juhaeri; Mol, Peter; Levitan, Bennett; Huang, Han-Yao; Coplan, Paul; Li, Hu

    2015-01-01

    Purpose Optimizing a therapeutic product's benefit-risk profile is an on-going process throughout the product's life cycle. Different, yet related, benefit-risk assessment strategies and frameworks are being developed by various regulatory agencies, industry groups, and stakeholders. This paper

  14. Effectively Serving the Needs of Today's Business Student: The Product Life Cycle Approach to Class Organization

    Science.gov (United States)

    Eastman, Jacqueline K.; Aviles, Maria; Hanna, Mark

    2012-01-01

    We illustrate a class organization process utilizing the concept of the Product Life Cycle to meet the needs of today's millennial student. In the Introduction stage of a business course, professors need to build structure to encourage commitment. In the Growth stage, professors need to promote the structure through multiple, brief activities that…

  15. Life Cycle Assessment of Miscanthus as a Fuel Alternative in District Heat Production

    DEFF Research Database (Denmark)

    Parajuli, Ranjan; Dalgaard, Tommy; Nguyen, T Lan T

    2013-01-01

    ) plant. Alternatively, we have simulated the combustion process of Miscanthus in a boiler, where only heat is produced. For NG similar scenarios are examined. Life Cycle Assessment (LCA) in relation to 1 MJ of heat production with Miscanthus fired in a CHP would lead to a Global Warming Potential (GWP......This study assesses the environmental performance of district heat production based on Miscanthus as a fuel input and compares it with Natural Gas (NG). As a baseline scenario, we assume that the process of energy conversion from Miscanthus to heat takes place in a Combined Heat and Power (CHP......) of -0.071 kg CO2-eq, a Non-Renewable Energy (NRE) use of -0.767 MJ primary, and 0.09 m2 Land Use (LU). In contrast, production of 1 MJ of heat with Miscanthus fired in a boiler would lead to a GWP of 0.005 kg CO2-eq, NRE use 0.172 MJ primary, and land use 0.063 m2-a. Miscanthus fired in a CHP performs...

  16. Emissions from photovoltaic life cycles

    NARCIS (Netherlands)

    Fthenakis, V.M.; Kim, H.C.; Alsema, E.A.|info:eu-repo/dai/nl/073416258

    2008-01-01

    Photovoltaic (PV) technologies have shown remarkable progress recently in terms of annual production capacity and life cycle environmental performances, which necessitate timely updates of environmental indicators. Based on PV production data of 2004–2006, this study presents the life-cycle

  17. Impact of selected risk factors on quality-adjusted life expectancy in Denmark

    DEFF Research Database (Denmark)

    Brønnum-Hansen, Henrik; Juel, Knud; Davidsen, Michael

    2007-01-01

    AIMS: The construct quality-adjusted life years (QALYs) combines mortality and overall health status and can be used to quantify the impact of risk factors on population health. The purpose of the study was to estimate the impact of tobacco smoking, high alcohol consumption, physical inactivity...... Health Survey 2000, and Danish EQ-5D values. RESULTS: The quality-adjusted life expectancy of 25-year-olds was 10-11 QALYs shorter for heavy smokers than for those who never smoke. The difference in life expectancy was 9-10 years. Men and women with high alcohol consumption could expect to lose about 5...... and 3 QALYs, respectively. Sedentary persons could expect to have about 7 fewer QALYs than physically active persons. Obesity shortened QALYs by almost 3 for men and 6 for women. CONCLUSIONS: Smoking, high alcohol consumption, physical inactivity, and obesity strongly reduce life expectancy and health...

  18. The Fatigue Life Prediction of Train Wheel Rims Containing Spherical Inclusions

    Science.gov (United States)

    Li, Yajie; Chen, Huanguo; Cai, Li; Chen, Pei; Qian, Jiacheng; Wu, Jianwei

    2018-03-01

    It is a common phenomenon that fatigue crack initiation occurs frequently in the inclusions of wheel rims. Research on the fatigue life of wheel rims with spherical inclusions is of great significance on the reliability of wheels. To find the danger point and working condition of a wheel, the stress state of the wheel rim with spherical inclusions was analyzed using the finite element method. Results revealed that curve conditions are dangerous. The critical plane method, based on the cumulative fatigue damage theory, was used to predict the fatigue life of the wheel rim and whether it contained spherical inclusions or not under curve conditions. It was found that the fatigue life of the wheel rim is significantly shorter when the wheel rim contains spherical inclusions. Analysis of the results can provide a theoretical basis and technical support for train operations and maintenance.

  19. A New Dynamic Pricing Model for the Effective Sustainability of Perishable Product Life Cycle

    Directory of Open Access Journals (Sweden)

    Pırıl Tekin

    2017-07-01

    Full Text Available Perishable products run their life cycle in a short period of time due to the shortness of their shelf lives. Product efficiency falls when especially non-recyclable products are thrown away without being used. Furthermore, this kind of products that unnecessarily occupy shelves of supermarkets cause supermarkets to follow an insufficient stock management policy. Unconscious and unplanned use of our limited natural resources will deteriorate the product portfolio for future generations. Such unconscious production and consumption patterns will disrupt natural balance and damage sustainability of products. In addition to creating very high costs for producers, sellers and consumers alike, these unsold or stale products lead to environmental problems due to such pricing policies. In other words, although the products have to be thrown away without being sold is attributed by many managers to be attributable to the unplanned over-orders, the actual reason is something else. The real contributor of the problem is changing purchase attitudes of customers because of wrong pricing policies of wholesaler. In addition, limited resources are also consumed fast and in unnecessary amounts. The imbalance in respect to the sustainability of these products leads to increase in the production costs, procurement costs and failure to achieve balance among products to be kept in storage houses as some of the products occupy stocks unnecessarily. In the present study, a new pricing policy is developed for product stock whose shelf lives are about to expire and generally become waste to increase salability of these products in reference to fresher stocks of these products. The present study, which is designed to reduce the above-mentioned losses, will seek to minimize the cost of waste, maximize the profit earned by supermarkets from the product, maximize product utilization rates and ensure sustainability of products and stocks as well. Fulfillment of these

  20. Calculation of the surface water pollution index in the evaluation of environmental component of product life cycle

    Directory of Open Access Journals (Sweden)

    Олег Аскольдович Проскурнин

    2015-05-01

    Full Text Available The assessment feasibility of the combined effect of the product life cycle on the environment is grounded. As an example, the pollution of surface waters at the production stage is considered in the article. A mechanism of ranking indicators of surface water pollution according to their importance is proposed. An algorithm for checking the consistency of the statistical expert judgment in determining weight coefficient for the indicators of pollution, based on the use of the concordance coefficient, is given

  1. Life Cycle Inventory Analysis of Prospective Insect Based Feed Production in West Africa

    Directory of Open Access Journals (Sweden)

    Martin Roffeis

    2017-09-01

    Full Text Available While the concept of insect based feeds (IBFs promises great potential, especially in developing countries, the sustainability performance of IBF production remains widely underexplored. Drawing on experimental data from rearing trials in West Africa, three different insect production systems were modelled ex-ante. The generic models served as a basis to analyse and compare the process performances of different IBF production systems using Musca domestica and Hermetia illucens reared on different substrates. The results show that the input efficiency in the production of IBF is largely determined by the quality of rearing substrates, the larval development time and the employed inoculation practises, i.e., the method by which eggs or larvae are added to rearing substrates. The H. illucens system ranked highest for conversion efficiency (substrate input per IBF output, but showed substantially higher inputs in labour, fossil energy and output of wastewater. M. domestica systems operated at lower conversion efficiencies, which resulted in higher outputs of residue substrates, together with higher emissions, land requirements, built infrastructure and water. By offering full disclosure of generic inventory data, this study provides data and inspiration for prospect research and development activities and offers a reference to future life cycle assessments (LCAs on IBF.

  2. Life Cycle Assessment of Biogas Production from Marine Macroalgae: a Latvian Scenario

    Science.gov (United States)

    Pilicka, Iluta; Blumberga, Dagnija; Romagnoli, Francesco

    2011-01-01

    There is potential environmental benefit to be gained from the use of algae because of their ability to fix CO2, no need for direct land use and utilization of bio-waste (rich in potassium, phosphate and nitrogen based compounds) as a nutrients. The aim of the research is to assess the impact of biogas production and the final use in a cogeneration unit system from a Life Cycle Assessment (LCA) in comparison with a similar reference system using a non-renewable source (e.g. natural gas). The paper is intended to be a preliminary study for understanding the implementation of this novel technology in a Latvian context.

  3. Product Life Cycle - Quality Management Issues

    DEFF Research Database (Denmark)

    Alting, Leo; Majstorovic, Vidosav D.

    2004-01-01

    The strategic goal of our country is European and world integration. Within this context the management of sustainable development considered from the aspect of product’s life cycle and its quality management represents a real challenge for researchers, economy and educational system. The aim...

  4. My Job is my Life. Overlap between Life and Work in Spanish Companies

    Directory of Open Access Journals (Sweden)

    Hugo Valenzuela

    2015-01-01

    Full Text Available This paper analyses emerging forms in which life and work are interwoven, based on 20 ethnographic studies conducted in enterprises in Spain. Whereas after the Industrial Revolution work processes tended to be autonomous from the living environments of production agents, in recent decades a trend in the opposite direction has been observed in some companies. This re-articulation takes place at several levels: a through the blurring of the boundaries that separate work and everyday life, b through the reintegration of affective dimensions into work processes, c in promoting reciprocity and sociability in the economic sphere and d in the production of meaningful experiences at work. Are we witnessing an emancipating balance between life and work? Or, on the contrary, is private life being colonized by the sphere of production? In this paper we seek to explore a third form of analysis, that of reflexive modernity.

  5. The Half-Life of the HSV-1 1.5 kb LAT Intron is similar to the half-Life of the 2.0 kb LAT Intron

    Science.gov (United States)

    Brinkman, Kerry K.; Mishra, Prakhar; Fraser, Nigel W.

    2013-01-01

    Herpes Simplex Virus type 1 (HSV-1) establishes a latent infection in the sensory neurons of the peripheral nervous system of humans. Although about 80 genes are expressed during the lytic cycle of the virus infection, essentially only one gene is expressed during the latent cycle. This gene is known as the latency associated transcript (LAT) and it appears to play a role in the latency cycle through an anti-apoptotic function in the 5’ end of the gene and miRNA encoded along the length of the transcript which down regulate some of the viral immediate early (IE) gene products. The LAT gene is about 8.3 kb long and consists of two exons separated by an unusual intron. The intron between the exons consists of two nested introns. This arrangement of introns has been called a twintron. Furthermore, the larger (2 kb) intron has been shown to be very stable. In this study we measure the stability of the shorter 1.5 kb nested intron and find its half-life is similar to the longer intron. This was achieved by deleting the 0.5 kb overlapping intron from a plasmid construct designed to express the LAT transcript from a tet-inducible promoter, and measuring the half-life of the 1.5 kb intron in tissue culture cells. This finding supports the hypothesis that it is the common branch-point region of these nested introns that is responsible for their stability. PMID:23335177

  6. Life Cycle and Secondary Production of Four Species from Functional Feeding Groups in a Tropical Stream of South India

    Directory of Open Access Journals (Sweden)

    Sankarappan Anbalagan

    2014-01-01

    Full Text Available This study focused on life strategies of species from functional feeding groups (FFGs found in a tropical stream of the Sirumalai hills, South India. We examined the life cycle and secondary production of species of shredders (Lepidostoma nuburagangai, scrapers (Baetis sp., collectors (Choroterpes alagarensis, and predators (Neoperla biseriata. In addition, we studied the assemblage structure of functional feeding groups. We found the collectors occupied the highest percentage, followed in turn by scrapers, predators, and shredders. The diversity of FFGs was higher at riffle areas and assemblage with stream substrates differing in each functional group. An asynchronous life cycle was observed for Baetis, C. alagarensis, and N. biseriata, while L. nuburagangai was found in four to five generations per year. We acquired data on secondary production of scraper species of Baetis, which reached the highest values among all investigated species. This observation stresses the importance of scrapers as playing a key role in converting coarse particulate organic matter to fine particulate organic matter with low or high abundances of shredder population and maintaining the food chain in tropical streams.

  7. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing

    Energy Technology Data Exchange (ETDEWEB)

    Tuenge, Jason R.; Hollomon, Brad; Dillon, Heather E.; Snowden-Swan, Lesley J.

    2013-03-01

    This report covers the third part of a larger U.S. Department of Energy (DOE) project to assess the life-cycle environmental and resource impacts in the manufacturing, transport, use, and disposal of light-emitting diode (LED) lighting products in relation to incumbent lighting technologies. All three reports are available on the DOE website (www.ssl.energy.gov/tech_reports.html). • Part 1: Review of the Life-Cycle Energy Consumption of Incandescent, Compact Fluorescent and LED Lamps; • Part 2: LED Manufacturing and Performance; • Part 3: LED Environmental Testing. Parts 1 and 2 were published in February and June 2012, respectively. The Part 1 report included a summary of the life-cycle assessment (LCA) process and methodology, provided a literature review of more than 25 existing LCA studies of various lamp types, and performed a meta-analysis comparing LED lamps with incandescent and compact fluorescent lamps (CFLs). Drawing from the Part 1 findings, Part 2 performed a more detailed assessment of the LED manufacturing process and used these findings to provide a comparative LCA taking into consideration a wider range of environmental impacts. Both reports concluded that the life-cycle environmental impact of a given lamp is dominated by the energy used during lamp operation—the upstream generation of electricity drives the total environmental footprint of the product. However, a more detailed understanding of end-of-life disposal considerations for LED products has become increasingly important as their installation base has grown. The Part 3 study (reported herein) was undertaken to augment the LCA findings with chemical analysis of a variety of LED, CFL, and incandescent lamps using standard testing procedures. A total of 22 samples, representing 11 different models, were tested to determine whether any of 17 elements were present at levels exceeding California or Federal regulatory thresholds for hazardous waste. Key findings include: • The selected

  8. Intra-Company Communication: A Key Element in Marketing Strategy.

    Science.gov (United States)

    Frost, Fred A.

    Rapid technological development, rising standards of living, and greater pressures of consumerism and consumer expectations have caused shorter product life cycles. Future organizational success will depend on organizations' abilities to respond to the changing opportunities and threats in the marketplace. As companies and products move through…

  9. Comparative life cycle assessment of pistachio, almond and apple production

    Directory of Open Access Journals (Sweden)

    G. Bartzas

    2017-09-01

    Full Text Available A comparative life cycle assessment (LCA, with the use of GaBi 6 software and specific related databases, of three water intensive tree cultivation systems was conducted in order to evaluate environmental impacts and energy consumption. The tree crops are traditionally cultivated in two representative areas in Greece, namely Aegina island, Attica region, for pistachios and Agia, East Thessaly region, central Greece, for apples and almonds. The impact categories considered include global warming potential (GWP, eutrophication potential (EP, acidification potential (AP and cumulative energy demand (CED. Based upon the results obtained, it is deduced that pistachios and almonds show minor differences for all impact categories considered, while apples exhibit the best environmental profile. The phases of fertilizers production, irrigation system and field management were identified as the main “hot-spots” for all crops, exhibiting the highest environmental impacts and energy consumption. A sensitivity analysis was performed to explore actions that can be considered at farm scale, such as water desalination for irrigation purposes, transition to organic production and use of renewable energy, in order to reduce water requirements and promote energy conservation, especially in semi-arid and arid Mediterranean regions which suffer from water shortage and are prone to salinization. Finally, the results of this study were compared with the results derived from other relevant LCA studies.

  10. Cost-effectiveness of longer-term versus shorter-term provision of antibiotics in patients with persistent symptoms attributed to Lyme disease

    NARCIS (Netherlands)

    Berende, A.; Nieuwenhuis, L.; Hofstede, H.J.M. ter; Vos, F.J.; Vogelaar, M.L.; Tromp, M.A.; Middendorp, H. van; Donders, A.R.T.; Evers, A.W.M.; Kullberg, B.J.; Adang, E.M.M.

    2018-01-01

    BACKGROUND: The treatment of persistent symptoms attributed to Lyme disease remains controversial. Recently, the PLEASE study did not demonstrate any additional clinical benefit of longer-term versus shorter-term antibiotic treatment. However, the economic impact of the antibiotic strategies has not

  11. Life estimation I and C cable insulation materials based on accelerated life testing accelerated life testing

    International Nuclear Information System (INIS)

    Santhosh, T.V.; Ramteke, P.K.; Shrestha, N.B.; Ahirwar, A.K.; Gopika, V.

    2016-01-01

    Accelerated Iife tests are becoming increasingly popular in today's industry due to the need for obtaining life data quickly and reliably. Life testing of products under higher stress levels without introducing additional failure modes can provide significant savings of both time and money. Correct analysis of data gathered via such accelerated life testing will yield parameters and other information for the product's life under use stress conditions. To be of practical use in assessing the operational behaviour of cables in NPPs, laboratory ageing aims to mimic the type of degradation observed under operational conditions. Conditions of testing therefore need to be carefully chosen to ensure that the degradation mechanism occurring in the accelerated tests are similar to those which occur in service. This paper presents the results of an investigation in which the elongation-at-break (EAB) measurements were carried on a typical control cable to predict the mean life at service conditions. A low voltage polyvinyl chloride (PVC) insulated and PVC sheathed control cable, used in NPP instrumentation and control (I and C) applications, was subjected thermal ageing at three elevated temperatures

  12. An integrated approach to extend the shelf life of a composite pastry product (cannoli).

    Science.gov (United States)

    Del Nobile, M A; Muratore, G; Conte, A; Incoronato, A L; Panza, O

    2009-12-01

    In this study, a combined approach is proposed to extend the shelf life of a composite pastry product (cannoli). In particular, to delay moisture migration, one, two, or three layers of a zein-based coating were studied. A three-layer coating represented the most effective solution to prevent rapid pastry softening. A subsequent experimental trial was aimed to prolong the shelf life of the ricotta-based stuffing. To this aim, two different antimicrobial compounds (lysozyme and lemon extract) at three concentrations (2,000, 3,000, and 4,000 ppm) were investigated separately from a microbiological and a sensorial point of view. Lemon extract was the active compound that received a better score, thus suggesting using 2,000 ppm of citrus extract in the last step. In the final experimental trial, cannoli were coated with three layers of zein, stuffed with ricotta containing the selected active agent, and packaged in two microperforated films. The use of zein-based coating and the lemon extract in the ricotta stuffing, combined with the barrier properties of the selected packaging materials, allowed a significant prolongation of cannoli shelf life, regardless of the type of film: a shelf life of more than 3 days was recorded, compared with the control samples, which were acceptable for less than 2 days. It is reasonable to assume that the proposed integrated approach could boost the distribution of the investigated typical pastry beyond local borders.

  13. Smoking, physical inactivity and obesity as predictors of healthy and disease-free life expectancy between ages 50 and 75: a multicohort study.

    Science.gov (United States)

    Stenholm, Sari; Head, Jenny; Kivimäki, Mika; Kawachi, Ichiro; Aalto, Ville; Zins, Marie; Goldberg, Marcel; Zaninotto, Paola; Magnuson Hanson, Linda; Westerlund, Hugo; Vahtera, Jussi

    2016-08-01

    Smoking, physical inactivity and obesity are modifiable risk factors for morbidity and mortality. The aim of this study was to examine the extent to which the co-occurrence of these behaviour-related risk factors predict healthy life expectancy and chronic disease-free life expectancy in four European cohort studies. Data were drawn from repeated waves of four cohort studies in England, Finland, France and Sweden. Smoking status, physical inactivity and obesity (body mass index ≥30 kg/m 2 ) were examined separately and in combination. Health expectancy was estimated by using two health indicators: suboptimal self-rated health and having a chronic disease (cardiovascular disease, cancer, respiratory disease and diabetes). Multistate life table models were used to estimate sex-specific healthy life expectancy and chronic disease-free life expectancy from ages 50 to 75 years. Compared with men and women with at least two behaviour-related risk factors, those with no behaviour-related risk factors could expect to live on average8 years longer in good health and 6 years longer free of chronic diseases between ages 50 and 75. Having any single risk factor was also associated with reduction in healthy years. No consistent differences between cohorts were observed. Data from four European countries show that persons with individual and co-occurring behaviour-related risk factors have shorter healthy life expectancy and shorter chronic disease-free life expectancy. Population level reductions in smoking, physical inactivity and obesity could increase life-years lived in good health. © The Author 2016. Published by Oxford University Press on behalf of the International Epidemiological Association.

  14. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-11-10

    Nov 10, 2017 ... change, shorter product life cycles and intense global competition. ... The circumstances proved that many universities in Malaysia are .... [12] Saunders M., Lewis P., Thornhill A. Research methods for business students.

  15. ANALYSING THE IMPACT OF THE PRODUCT LIFE CYCLE ON THE IMPORTANCE OF OUTSOURCING DECISION-MAKING CRITERIA: A MANUFACTURING CASE STUDY

    Directory of Open Access Journals (Sweden)

    M. Cheshmberah

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This study has been carried out to discover the impact of the product life cycle (PLC on the importance of outsourcing decision-making criteria in a manufacturing firm. The four dimensions of outsourcing decision-making were identified, based on a literature review and on the conditions of the firm: (1 core competencies, (2 information leakage risk, (3 technological capability, and (4 cost. A case study and survey research were used, along with two non-parametric tests (Friedman’s test and Kendall’s W. The results show in particular that the importance of ‘technological capability’ and ‘strategic information leakage risk’ does not differ across the various PLC stages. The importance of ‘leakage risk of product volume information’ and ‘total cost’ change over different stages of the product life cycle are also addressed. For the latter two criteria, the probabilities of each rating related to each criterion importance have been estimated by ordinal logistic regression, and the weights of these criteria have been calculated at each stage of the product life cycle.

    AFRIKAANSE OPSOMMING: Die navorsing ondersoek die invloed van produklewensiklus op die gebruik van buite leweransiers deur ’n vervaardigingsonderneming. ’n Besluitvormingsmetode word ontwerp en getoets deur skepping van ’n boeket van wiskundige gereedskap soos, onder andere, ordinale logistiese regressie en die logistieke funksie. Die metode word ten slotte afgerond met ’n keurige gebruik van die Wasigheidsleer.

  16. Dynamic Heat Production Modeling for Life Cycle Assessment of Insulation in Danish Residential Buildings

    DEFF Research Database (Denmark)

    Sohn, Joshua L.; Kalbar, Pradip; Birkved, Morten

    2017-01-01

    insulation in a Danish single-family detached home. This single family house, is based on averages of current Danish construction practices with building heat losses estimated using Be10. To simulate a changing district heating grid mix, heat supply fuel sources are modeled according to Danish energy mix...... for space heating without insulation over the lifespan of a building. When the energy sources for insulation production are similar to the energy mix that supplies heat, this logic is valid to very high level of insulation. However, in Denmark, as well as many other countries this assumption is becoming...... increasingly incorrect. Given the generally long service life of buildings, the significance of future energy mixes, which are expected/intended to have a smaller environmental impact, can be great. In this paper, a reference house is used to assess the life cycle environmental impacts of mineral wool...

  17. Impact of cough and common cold on productivity, absenteeism, and daily life in the United States: ACHOO Survey.

    Science.gov (United States)

    Dicpinigaitis, Peter V; Eccles, Ron; Blaiss, Michael S; Wingertzahn, Mark A

    2015-08-01

    Although the common cold is among the most frequent ailments encountered in clinical practice, little is known about its impact on productivity, absenteeism, and daily life. The United States Attitudes of Consumers Toward Health, Cough, and Cold (ACHOO) survey was developed to inform healthcare providers on patients' experience of cough/cold. This analysis focuses on the impact of cough/cold on daily activity, productivity, and absenteeism; other results are reported elsewhere. ACHOO was a 36-question online survey. US adult Internet/mobile device users (N = 3333) were recruited in October 2012. Response quotas modeled on 2010 US Census data ensured a demographically representative sample; 75% of completed surveys were randomized as the primary analysis pool. Demographics and impact of cough/cold were reported using means, frequencies, and percentages. Weighted least squares regression or weighted paired t-test were used to identify factors associated with greater impact. The analysis pool (N = 2505) included 1342 (53.6%) women and 1163 (46.4%) men (mean ages, 46.7 and 45.9 years). A majority (84.7%) had ≥1 cold in the past year. Fifty-two percent said cough/cold impacted daily life a fair amount to a lot. Productivity decreased by a mean 26.4%, and 44.5% of respondents reported work/school absenteeism (usually 1-2 days) during a cold. Overall, 93% of survey participants reported sleep difficulty (slight to extreme) during a cough/cold. Among all respondents, 57% reported cough or nasal congestion as the symptoms making sleep difficult. Higher frequency of colds, more cold symptoms, difficulty sleeping, and worse overall health status correlated with greater impact on productivity, absenteeism, and daily life. Study limitations include the potential for recall bias given the retrospective nature of the self-reports. Furthermore, no attempt was made to distinguish treatment effects, if any, from those of the underlying cough/cold. To our knowledge, this is

  18. Homework schedule: an important factor associated with shorter sleep duration among Chinese school-aged children.

    Science.gov (United States)

    Li, Shenghui; Yang, Qian; Chen, Zhe; Jin, Xingming; Jiang, Fan; Shen, Xiaoming

    2014-09-03

    This study was designed to examine the hypothesis that homework schedule has adverse impacts on Chinese children's sleep-wake habits and sleep duration. A random sample of 19,299 children aged 5.08 to 11.99 years old participated in a large, cross-sectional survey. A parent-administered questionnaire was completed to quantify children's homework schedule and sleep behaviors. Generally, it was demonstrated that more homework schedule was significantly associated with later bedtime, later wake time, and shorter sleep duration. Among all sleep variables, bedtime and sleep duration during weekdays appeared to be most affected by homework schedule, especially homework schedule during weekdays.

  19. Evaluation of Aquaponics Techniques for Enhancing Productivity and Degree of Closure of Bioregenerative Life Support Systems (BLSS)

    Science.gov (United States)

    Nelson, Mark; Dempster, William; Highfield, Eric

    A number of researchers in space bioregenerative life support systems (BLSS) have advocated the inclusion of fish-rearing. Fish have relatively high feed to production ratios and can utilize some waste products from other system components. In recent years, there has been much advance in an approach to combining fish-culture with hydroponically-grown crops called “aquaponics”. Aquaponics systems vary but generally include: fish-rearing unit, settling basin, biofilter, hydroponic plant unit and sump where water is pumped back and the cycle continues. Aquaponics research and application has grown since these systems have the potential to increase overall productivity of both crops and fish. Since the fish waste is used as the growth medium of the food plants, there are environmental benefits in reduced discharge of nutrient-rich wastewater which has been one of the drawbacks of conventional aquaculture. In addition, since water use is reduced 95+% over field agriculture, since water from the hydroponic tanks is fed back to the fish tanks and water is recycled apart from evapotranspiration losses, conservation of water resources and applications in water-limited arid regions are other benefits fueling the spread of aquaponics around the world. These considerations also make utilization of aquaponic approaches desirable in BLSS for space application. This paper will examine some recent research results with aquaponics and explore how it might be utilized for food production and reduction of consumables in space life support. In addition, a review and comparison with other fish-culture options previously advanced will evaluate whether aquaponics can improve production efficiency, reduce inputs and better recycle critical resources. Finally, we will explore whether for the space environment, even more advanced aquaponics systems are possible where consumables such as fish-food can be partially or completely supplied from other subsystems of the BLSS and ET water

  20. FY 1998 annual summary report on shared product life-cycle total information system. 3; 1998 nendo joho kyoyugata product lifecycle system ni kansuru chosa hokokusho. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Recycling resources is gaining importance increasingly to correspond to global environmental problems. In urban areas, in particular, it is important to efficiently recover and recycle used large-size consumer products, e.g., home electric appliances and automobiles, which are discharged in large quantities. This study proposes a shared product life-cycle total information system, based on recognition that material recycling systems, encompassing stock materials, product production, consumption, and disposal and recycling of wastes, are essential. This system corresponds a material to information, in an attempt to realize more efficient recycling of products. The study for this fiscal year was focused on use of information modules attached to products and their members, product recycling systems using these modules, necessity for and problems involved in thermal recycle systems, problems involved in recycling home electric appliances and extraction of the data for their recycling, and material recycling process systems for home electric appliances and automobiles. (NEDO)

  1. Interstitial lung abnormalities in treatment-naïve advanced non-small-cell lung cancer patients are associated with shorter survival

    Energy Technology Data Exchange (ETDEWEB)

    Nishino, Mizuki, E-mail: Mizuki_Nishino@DFCI.HARVARD.EDU [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Department of Imaging, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215 (United States); Cardarella, Stephanie [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States); Dahlberg, Suzanne E. [Department of Biostatistics and Computational Biology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215 (United States); Araki, Tetsuro [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Lydon, Christine; Jackman, David M.; Rabin, Michael S. [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States); Hatabu, Hiroto [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Johnson, Bruce E. [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States)

    2015-05-15

    Highlights: • Interstitial lung abnormalities were present in 14% of stage IV NSCLC patients. • ILA was more common in older patients with heavier smoking history. • ILA was associated with shorter survival after adjusting for smoking and therapy. • ILA could be an additional independent marker for survival in advanced NSCLC. - Abstract: Objective: Interstitial lung diseases are associated with increased risk of lung cancer. The prevalence of ILA at diagnosis of advanced non-small-cell lung cancer (NSCLC) and its impact on overall survival (OS) remain to be investigated. Materials and method: The study included 120 treatment-naïve stage IV NSCLC patients (53 males, 67 females). ILA was scored on CT prior to any systemic therapy using a 4-point scale [0 = no evidence of ILA, 1 = equivocal for ILA, 2 = suspicious for ILA, 3 = ILA] by a sequential reading method previously reported. ILA scores of 2 or 3 indicated the presence of ILA. Results: ILA was present in 17 patients (14%) with advanced NSCLC prior to any treatment (score3: n = 2, score2: n = 15). These 17 patients were significantly older (median age: 69 vs. 63, p = 0.04) and had a heavier smoking history (median: 40 vs. 15.5 pack-year, p = 0.003) than those with ILA score 0 or 1. Higher ILA scores were associated with shorter OS (p = 0.001). Median OS of the 17 patients with ILA was 7.2 months [95%CI: 2.9–9.4] compared to 14.8 months [95%CI: 11.1–18.4] in patients with ILA score 0 or 1 (p = 0.002). In a multivariate model, the presence of ILA remained significant for increased risk for death (HR = 2.09, p = 0.028) after adjusting for first-line systemic therapy (chemotherapy, p < 0.001; TKI, p < 0.001; each compared to no therapy) and pack years of smoking (p = 0.40). Conclusion: Radiographic ILA was present in 14% of treatment-naïve advanced NSCLC patients. Higher ILA scores were associated with shorter OS, indicating that ILA could be a marker of shorter survival in advanced NSCLC.

  2. Energy-economic life cycle assessment (LCA) and greenhouse gas emissions analysis of olive oil production in Iran

    International Nuclear Information System (INIS)

    Rajaeifar, Mohammad Ali; Akram, Asadolah; Ghobadian, Barat; Rafiee, Shahin; Heidari, Mohammad Davoud

    2014-01-01

    In this study the energy and economic flows and greenhouse gas (GHG) emissions of olive oil production in Iran were investigated in terms of a life cycle assessment with considering four main stages of agricultural olive production, olive transportation, olive oil extraction and its oil transportation to the customer centers. Data was collected from 150 olive growers in Guilan province of Iran. Results revealed that the total energy consumption through the olive oil life cycle was 20 344 MJ ha −1 while the mass-based allocation method results indicated that the total energy consumption was 8035 MJ ha −1 . The total energy output was estimated as 23 568 MJ ha −1 . The total GHG emissions was estimated to 1333 kg ha −1 (CO 2 eq) while the mass-based allocation method results indicated that the total GHG emissions was 525 kg ha −1 (CO 2 eq). The agricultural production stage ranked the first in GHG emissions among the four stages with the share of 93.81% of total GHG emissions. Results of econometric model estimation revealed that the impact of human labor, farmyard manure and electricity on olive oil yield and the impact of electricity and chemical fertilizers on GHG emissions were significantly positive. - Highlights: • Energy and economic flows and GHG emissions of olive oil production in Iran were investigated. • The total energy consumption of olive oil production was calculated as 20 344 MJ ha −1 . • The mass-based allocation showed the energy consumption of olive oil production was 8035 MJ ha −1 . • The total GHG emissions of olive oil production was 1333 kg ha −1 (CO 2 eq). • The mass-based allocation showed the total GHG emissions of olive oil production was 525 kg ha −1 (CO 2 eq)

  3. The management of subsurface uncertainty using probabilistic modeling of life cycle production forecasts and cash flows

    International Nuclear Information System (INIS)

    Olatunbosun, O. O.

    1998-01-01

    The subject pertains to the implementation of the full range of subsurface uncertainties in life cycle probabilistic forecasting and its extension to project cash flows using the methodology of probabilities. A new tool has been developed in the probabilistic application of Crystal-Ball which can model reservoir volumetrics, life cycle production forecasts and project cash flows in a single environment. The tool is modular such that the volumetrics and cash flow modules are optional. Production forecasts are often generated by applying a decline equation to single best estimate values of input parameters such as initial potential, decline rate, abandonment rate etc -or sometimes by results of reservoir simulation. This new tool provides a means of implementing the full range of uncertainties and interdependencies of the input parameters into the production forecasts by defining the input parameters as probability density functions, PDFs and performing several iterations to generate an expectation curve forecast. Abandonment rate is implemented in each iteration via a link to an OPEX model. The expectation curve forecast is input into a cash flow model to generate a probabilistic NPV. Base case and sensitivity runs from reservoir simulation can likewise form the basis for a probabilistic production forecast from which a probabilistic cash flow can be generated. A good illustration of the application of this tool is in the modelling of the production forecast for a well that encounters its target reservoirs in OUT/ODT situation and thus has significant uncertainties. The uncertainty in presence and size (if present) of gas cap and dependency between ultimate recovery and initial potential amongst other uncertainties can be easily implemented in the production forecast with this tool. From the expectation curve forecast, a probabilistic NPV can be easily generated. Possible applications of this tool include: i. estimation of range of actual recoverable volumes based

  4. Systemic lupus erythematosus and vitamin D deficiency are associated with shorter telomere length among African Americans: a case-control study.

    Directory of Open Access Journals (Sweden)

    Brett M Hoffecker

    Full Text Available Systemic lupus erythematosus (SLE is a chronic systemic autoimmune disease that disproportionately affects African American females. The causes of SLE are unknown but postulated to be a combination of genetic predisposition and environmental triggers. Vitamin D deficiency is one of the possible environmental triggers. In this study we evaluated relationships between vitamin D status, cellular aging (telomere length and anti-telomere antibodies among African American Gullah women with SLE. The study population included African American female SLE patients and unaffected controls from the Sea Island region of South Carolina. Serum 25-hydroxyvitamin D levels were measured using a nonchromatographic radioimmunoassay. Telomere length was measured in genomic DNA of peripheral blood mononuclear cells (PBMCs by monochrome multiplex quantitative PCR. Anti-telomere antibody levels were measured by enzyme-linked immunosorbent assay (ELISA. Patients with SLE had significantly shorter telomeres and higher anti-telomere antibody titers compared to age- and gender-matched unaffected controls. There was a positive correlation between anti-telomere antibody levels and disease activity among patients and a significant correlation of shorter telomeres with lower 25-hydroxyvitamin D levels in both patients and controls. In follow-up examination of a subset of the patients, the patients who remained vitamin D deficient tended to have shorter telomeres than those patients whose 25-hydroxyvitamin D levels were repleted. Increasing 25-hydroxyvitamin D levels in African American patients with SLE may be beneficial in maintaining telomere length and preventing cellular aging. Moreover, anti-telomere antibody levels may be a promising biomarker of SLE status and disease activity.

  5. Surveys on Work-life balance and productivity (in Japanese)

    OpenAIRE

    Ryo Yamada; Miyuki Yoshida

    2009-01-01

    In recent years, developed countries are increasing their focus on policies that improve the balance between work and life. Japan established a "work-life balance" charter at the end of 2007; the Japanese government, workers, and employers have agreed to collaborate in the belief that creating a society that balances work and life for all generations is desirable. Behind the trend is the fact that long working hours are a big reason for Japan's falling birthrate, which has threatened the sust...

  6. An FMS Dynamic Production Scheduling Algorithm Considering Cutting Tool Failure and Cutting Tool Life

    International Nuclear Information System (INIS)

    Setiawan, A; Wangsaputra, R; Halim, A H; Martawirya, Y Y

    2016-01-01

    This paper deals with Flexible Manufacturing System (FMS) production rescheduling due to unavailability of cutting tools caused either of cutting tool failure or life time limit. The FMS consists of parallel identical machines integrated with an automatic material handling system and it runs fully automatically. Each machine has a same cutting tool configuration that consists of different geometrical cutting tool types on each tool magazine. The job usually takes two stages. Each stage has sequential operations allocated to machines considering the cutting tool life. In the real situation, the cutting tool can fail before the cutting tool life is reached. The objective in this paper is to develop a dynamic scheduling algorithm when a cutting tool is broken during unmanned and a rescheduling needed. The algorithm consists of four steps. The first step is generating initial schedule, the second step is determination the cutting tool failure time, the third step is determination of system status at cutting tool failure time and the fourth step is the rescheduling for unfinished jobs. The approaches to solve the problem are complete-reactive scheduling and robust-proactive scheduling. The new schedules result differences starting time and completion time of each operations from the initial schedule. (paper)

  7. Evaluating the potential of renewable diesel production from algae cultured on wastewater: techno-economic analysis and life cycle assessment

    Directory of Open Access Journals (Sweden)

    Ankita Juneja

    2017-03-01

    Full Text Available Algae, a renewable energy source, has an added advantage of consuming nutrients from wastewater and consequently aiding in wastewater treatment. The algae thus produced can be processed using alternative paths for conversion to fuels. However, due to high moisture content of algae, wet algae processing methods are being encouraged to avoid the dewatering cost and energy. Hydrothermal liquefaction is one such technology that converts the algae into high heating value bio-oil under high temperature and pressure. This bio-oil can be further upgraded to renewable diesel (RD which can be used in diesel powered vehicles without any modifications. The objective of this study is to evaluate the economic viability and to estimate the energy use and greenhouse gas (GHG emissions during life cycle of RD production from algae grown in wastewater using hydrothermal liquefaction. Economic analysis of RD production on commercial scale was performed using engineering process model of RD production plant with processing capacity of 60 Mgal wastewater/day, simulated in SuperPro designer. RD yields for algae were estimated as 10.18 MML/year with unit price of production as $1.75/RD. The GHG emissions during life cycle of RD production were found to be 6.2 times less than those produced for conventional diesel. Sensitivity analysis indicated a potential to reduce ethanol production cost either by using high lipid algae or increasing the plant size. The integrated economic and ecological assessment analyses are helpful in determining long-term sustainability of a product and can be used to drive energy policies in an environmentally sustainable direction.

  8. Smoking Topography among Korean Smokers: Intensive Smoking Behavior with Larger Puff Volume and Shorter Interpuff Interval.

    Science.gov (United States)

    Kim, Sungroul; Yu, Sol

    2018-05-18

    The difference of smoker's topography has been found to be a function many factors, including sex, personality, nicotine yield, cigarette type (i.e., flavored versus non-flavored) and ethnicity. We evaluated the puffing behaviors of Korean smokers and its association with smoking-related biomarker levels. A sample of 300 participants was randomly recruited from metropolitan areas in South Korea. Topography measures during a 24-hour period were obtained using a CReSS pocket device. Korean male smokers smoked two puffs less per cigarette compared to female smokers (15.0 (13.0⁻19.0) vs. 17.5 (15.0⁻21.0) as the median (Interquartile range)), but had a significantly larger puff volume (62.7 (52.7⁻75.5) mL vs. 53.5 (42.0⁻64.2) mL); p = 0.012). The interpuff interval was similar between men and women (8.9 (6.5⁻11.2) s vs. 8.3 (6.2⁻11.0) s; p = 0.122) but much shorter than other study results. A dose-response association ( p = 0.0011) was observed between daily total puff volumes and urinary cotinine concentrations, after controlling for sex, age, household income level and nicotine addiction level. An understanding of the difference of topography measures, particularly the larger puff volume and shorter interpuff interval of Korean smokers, may help to overcome a potential underestimation of internal doses of hazardous byproducts of smoking.

  9. Effect of chitosan on shelf life of restructured fish products from pangasius (pangasianodon hypophthalmus) surimi during chilled storage.

    Science.gov (United States)

    Jeyakumari A; George Ninan; Joshy C G; Parvathy U; Zynudheen A A; Lalitha K V

    2016-04-01

    In the present study, restructured products were prepared from pangasius surimi and their qualities were analysed under chilled storage. Pangasius surimi had 75.82 % moisture, 16.91 % protein, 2.76 % fat and 0.95 % ash. Restructured products were prepared in three different formulations by incorporating corn starch (10 %) and chitosan (0.75 %). Formulation containing only corn starch (10 %) was served as control. In all the formulations, mono unsaturated fatty acids were higher (45.14 %). The total volatile base nitrogen (TVB-N) showed an increasing trend and it was found to be higher in control (4.8 mg/100 g) on 10(th) day than the chitosan incorporated sample (3.5-4.2 mg/100 g) on 17(th) day during chill storage. Similarly, peroxide value (PV) was found to higher (8.85 milliequivalent of O2/kg) in control than the chitosan incorporated sample (4.5-6.8 milliequivalent of O2/kg) on 10(th) day. All the three formulations had an acceptable level of thiobarbituric acid (TBA) value that ranged between 0.023-0.098 mg of malanoldehyde/kg during chilled storage. Based on the sensory and microbiological analysis, products prepared without chitosan had a shelf life of 10 day whereas, products incorporated with chitosan had an extended shelf life of 17 day.

  10. Inequalities in US Life Expectancy by Area Unemployment Level, 1990–2010

    Science.gov (United States)

    Singh, Gopal K.; Siahpush, Mohammad

    2016-01-01

    This study examined the association between unemployment and life expectancy in the United States during 1990–2010. Census-based unemployment rates were linked to US county-level mortality data. Life expectancies were calculated by age, sex, race, and unemployment level during 1990–2010. Differences in life expectancy were decomposed by age and cause of death. Life expectancy was consistently lower in areas with higher unemployment rates. In 2006–2010, those in areas with high unemployment rates (≥9%) had a life expectancy of 76.9 years, compared with 80.7 years for those in areas with low unemployment rates (unemployment and life expectancy was stronger for men than for women. Life expectancy ranged from 69.9 years among black men in high unemployment areas to 90.0 years among Asian/Pacific Islander women in low unemployment areas. Disparities persisted over time. In 1990–1992, life expectancy was 4.7 years shorter in high unemployment than in low unemployment areas. In 2006–2010, the life expectancy difference between the lowest and highest unemployment areas decreased to 3.8 years. Heart disease, cancer, homicide, unintentional injuries, diabetes, HIV/AIDS, and liver cirrhosis contributed most to the lower life expectancy in high unemployment areas. High unemployment areas recorded larger gains in life expectancy than low unemployment areas, contributing to the narrowing gap during 1990–2010. PMID:27073716

  11. Application of life cycle assessment to production processes of environmentally sustainable concrete, prepared with artificial aggregates

    International Nuclear Information System (INIS)

    Vaccaro, R.; Colangelo, F.; Palumbo, M.; Cioffi, R.

    2005-01-01

    This paper is about the application of Life Cycle Assessment (L.C.A.) on environmentally sustainable concrete production processes. The goal of this experimentations is to assess environmental impact and energy demand related to concrete production, by using, in different admixtures, natural and artificial aggregates, belonging from treatments of different kind of industrial wastes characterized by very small particle sizes. Particular attention was concentrated on the utilization of fine fraction since it is difficult to recover in usual fields of recycling (i.e. aggers, crowl spaces, etc.). This study follows the approach from cradle to cradle. This experimentation was conducted in relation to four concrete admixtures produced, one of them containing only natural aggregate, and the other ones obtained by substituting the 10% of aggregate respectively with inert wastes as construction and demolition waste (CeD waste). cement kiln dust (CKD) and marble sludge. For all admixtures six different end-life scenarios have been proposed, one of them considers all materials transported in landfill while the other ones consider a partial transportation on landfill (15%) and a recycle of the 85% of wastes obtained after demolition of structures [it

  12. Work productivity in systemic sclerosis, its economic burden and association with health-related quality of life.

    Science.gov (United States)

    Morrisroe, Kathleen; Sudararajan, Vijaya; Stevens, Wendy; Sahhar, Joanne; Zochling, Jane; Roddy, Janet; Proudman, Susanna; Nikpour, Mandana

    2018-01-01

    To evaluate work productivity and its economic burden in SSc patients. Consecutive SSc patients enrolled in the Australian Scleroderma Cohort Study were mailed questionnaires assessing employment (Workers' Productivity and Activity Impairment Questionnaire and a custom-made questionnaire) and health-related quality of life (HRQoL) (36-item Short Form Health Survey and Patient-Reported Outcomes Measurement Information System 29). Linear regression methods were used to determine factors associated with work productivity. Among 476 patients submitting responses, 55.2% productivity while at work (presenteeism) accounted for 22% of their working week. Annual costs per patient as a consequence of unemployment and reduced productivity equated to a total of AUD$67 595.40. Factors independently associated with reduced work productivity were presence of synovitis and sicca symptoms, while tertiary education protected against work impairment. Patients with low HRQoL scores also had low work productivity. SSc is associated with considerable unemployment and reduced productivity, which in turn is associated with a substantial economic burden and poor HRQoL. Raising awareness and identifying modifiable factors are possible ways of reducing this burden. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com

  13. Advances in life cycle assessment and emergy evaluation with case studies in gold mining and pineapple production

    Science.gov (United States)

    Ingwersen, Wesley W.

    Life cycle assessment (LCA) is an internationally standardized framework for assessing the environmental impacts of products that is rapidly evolving to improve understanding and quantification of how complex product systems depend upon and affect the environment. This dissertation contributes to that evolution through the development of new methods for measuring impacts, estimating the uncertainty of impacts, and measuring ranges of environmental performance, with a focus on product systems in non-OECD countries that have not been well characterized. The integration of a measure of total energy use, emergy, is demonstrated in an LCA of gold from the Yanacocha mine in Peru in the second chapter. A model for estimating the accuracy of emergy results is proposed in the following chapter. The fourth chapter presents a template for LCA-based quantification of the range of environmental performance for tropical agricultural products using the example of fresh pineapple production for export in Costa Rica that can be used to create product labels with environmental information. The final chapter synthesizes how each methodological contribution will together improve the science of measuring product environmental performance.

  14. At least 10% shorter C–H bonds in cryogenic protein crystal structures than in current AMBER forcefields

    Energy Technology Data Exchange (ETDEWEB)

    Pang, Yuan-Ping, E-mail: pang@mayo.edu

    2015-03-06

    High resolution protein crystal structures resolved with X-ray diffraction data at cryogenic temperature are commonly used as experimental data to refine forcefields and evaluate protein folding simulations. However, it has been unclear hitherto whether the C–H bond lengths in cryogenic protein structures are significantly different from those defined in forcefields to affect protein folding simulations. This article reports the finding that the C–H bonds in high resolution cryogenic protein structures are 10–14% shorter than those defined in current AMBER forcefields, according to 3709 C–H bonds in the cryogenic protein structures with resolutions of 0.62–0.79 Å. Also, 20 all-atom, isothermal–isobaric, 0.5-μs molecular dynamics simulations showed that chignolin folded from a fully-extended backbone formation to the native β-hairpin conformation in the simulations using AMBER forcefield FF12SB at 300 K with an aggregated native state population including standard error of 10 ± 4%. However, the aggregated native state population with standard error reduced to 3 ± 2% in the same simulations except that C–H bonds were shortened by 10–14%. Furthermore, the aggregated native state populations with standard errors increased to 35 ± 3% and 26 ± 3% when using FF12MC, which is based on AMBER forcefield FF99, with and without the shortened C–H bonds, respectively. These results show that the 10–14% bond length differences can significantly affect protein folding simulations and suggest that re-parameterization of C–H bonds according to the cryogenic structures could improve the ability of a forcefield to fold proteins in molecular dynamics simulations. - Highlights: • Cryogenic crystal structures are commonly used in computational studies of proteins. • C–H bonds in the cryogenic structures are shorter than those defined in forcefields. • A survey of 3709 C–H bonds shows that the cryogenic bonds are 10–14% shorter. • The

  15. Reemission spectra and inelastic processes at interaction of attosecond and shorter duration electromagnetic pulses with atoms

    International Nuclear Information System (INIS)

    Makarov, D.N.; Matveev, V.I.

    2017-01-01

    Inelastic processes and the reemission of attosecond and shorter electromagnetic pulses by atoms have been considered within the analytical solution of the Schrödinger equation in the sudden perturbation approximation. A method of calculations with the exact inclusion of spatial inhomogeneity of the field of an ultrashort pulse and the momenta of photons in the reemission processes has been developed. The probabilities of inelastic processes and spectra of reemission of ultrashort electromagnetic pulses by one- and many-electron atoms have been calculated. The results have been presented in the form of analytical formulas.

  16. Effect of load ratio and saltwater corrosive environment on the initiation life of fatigue of 10Ni5CrMoV steel

    Science.gov (United States)

    Xie, Xing; Yi, Hong; Xu, Jian; Gen, Liming; Chen, Luyun

    2017-09-01

    Fatigue initiation life has been studied with 10CrNi5MoV steel for use in ocean engineering at different load ratios and in different environmental media. The microstructure and micro-topography have been observed and analyzed by means of SEM, EDS and EBSD. Our findings indicate that, the initiation life of 10Ni5CrMoV steel in seawater is shorter than that in air, and the difference in longevity is larger with the increasing of load ratio. Corrosion pits had a great influence on initial corrosion fatigue life.

  17. Perspectives for the Development of a Working Life Policy

    DEFF Research Database (Denmark)

    Hvid, Helge; Hasle, Peter

    2003-01-01

    A discussion of the perspectives in a working life policy with development of both a humane working life and productivity.......A discussion of the perspectives in a working life policy with development of both a humane working life and productivity....

  18. Goal and Scope in Life Cycle Sustainability Analysis: The Case of Hydrogen Production from Biomass

    Directory of Open Access Journals (Sweden)

    Milena Stefanova

    2014-08-01

    Full Text Available The framework for life cycle sustainability analysis (LCSA developed within the project CALCAS (Co-ordination Action for innovation in Life-Cycle Analysis for Sustainability is introducing a truly integrated approach for sustainability studies. However, it needs to be further conceptually refined and to be made operational. In particular, one of the gaps still hindering the adoption of integrated analytic tools for sustainability studies is the lack of a clear link between the goal and scope definition and the modeling phase. This paper presents an approach to structure the goal and scope phase of LCSA so as to identify the relevant mechanisms to be further detailed and analyzed in the modeling phase. The approach is illustrated with an on-going study on a new technology for the production of high purity hydrogen from biomass, to be used in automotive fuel cells.

  19. Use of a novel shorter minimum caliber needle for creating endoscopic tattoos for preoperative localization: a comparative ex vivo study.

    Science.gov (United States)

    Imai, Kenichiro; Hotta, Kinichi; Ito, Sayo; Yamaguchi, Yuichiro; Kawakami, Takeshi; Wada, Takuya; Igarashi, Kimihiro; Kishida, Yoshihiro; Kinugasa, Yusuke; Kawata, Noboru; Tanaka, Masaki; Kakushima, Naomi; Takizawa, Kohei; Ishiwatari, Hirotoshi; Matsubayashi, Hiroyuki; Ono, Hiroyuki

    2017-06-01

    In colorectal cancer surgery, inadvertent deep injections during endoscopic tattooing can cause India ink leakage into the peritoneum, leading to complications or to poor visualization of the surgical plane. This ex vivo animal study compared the use of novel shorter, minimum caliber needles versus conventional injection needles for endoscopic tattooing. Four endoscopists used the novel needles and conventional needles to make ten endoscopic tattoos (five tattoos/needle type/endoscopist) in harvested porcine rectum using a saline test-injection method. India ink leakage and the success of the tattoo (i. e. visible, tattoos but for none of the novel needle tattoos ( P  = 0.02). Tattoos created using the novel needles were more successful than those made with the conventional needles: 18/20 (90 %) vs. 11/20 (55 %); P  = 0.01. The use of novel shorter minimum caliber needles may be safe and effective for endoscopic tattooing for preoperative localization prior to colorectal cancer surgery.

  20. An experimental demonstration that early-life competitive disadvantage accelerates telomere loss.

    Science.gov (United States)

    Nettle, Daniel; Monaghan, Pat; Gillespie, Robert; Brilot, Ben; Bedford, Thomas; Bateson, Melissa

    2015-01-07

    Adverse experiences in early life can exert powerful delayed effects on adult survival and health. Telomere attrition is a potentially important mechanism in such effects. One source of early-life adversity is the stress caused by competitive disadvantage. Although previous avian experiments suggest that competitive disadvantage may accelerate telomere attrition, they do not clearly isolate the effects of competitive disadvantage from other sources of variation. Here, we present data from an experiment in European starlings (Sturnus vulgaris) that used cross-fostering to expose siblings to divergent early experience. Birds were assigned either to competitive advantage (being larger than their brood competitors) or competitive disadvantage (being smaller than their brood competitors) between days 3 and 12 post-hatching. Disadvantage did not affect weight gain, but it increased telomere attrition, leading to shorter telomere length in disadvantaged birds by day 12. There were no effects of disadvantage on oxidative damage as measured by plasma lipid peroxidation. We thus found strong evidence that early-life competitive disadvantage can accelerate telomere loss. This could lead to faster age-related deterioration and poorer health in later life.

  1. Foliar stable carbon and nitrogen isotopes in woody Mediterranean species with different life form and post-fire regeneration.

    Science.gov (United States)

    Saura-Mas, S; Lloret, F

    2010-01-01

    Wildfire is an important ecological disturbance factor in most Mediterranean ecosystems. In the Mediterranean Basin, most shrub species can regenerate after fire by resprouting or seeding. Here, we hypothesize that post-fire regenerative syndromes may potentially co-vary with traits directly related to functional properties involved in resource use. Thus, seeders with a shorter life span and smaller size would have lower water-use efficiency (WUE) than re-sprouting species and would take up nutrients such as nitrogen from more superficial parts of the soil. To test this hypothesis, we compared leaf (13)C and (15)N signatures from 29 co-existing species with different post-fire regeneration strategies. We also considered life form as an additional explanatory variable of the differences between post-fire regenerative groups. Our data support the hypothesis that seeder species (which mostly evolved in the Quaternary under a Mediterranean climate) have lower WUE and less stomatal control than non-seeders (many of which evolved under different climatic conditions in the Tertiary) and consequently greater consumption of water per unit biomass. This would be related to their smaller life forms, which tend to have lower WUE and shorter life and leaf lifespan. Differences in (15)N also support the hypothesis that resprouters have deeper root systems than non-resprouters. The study supports the hypothesis of an overlap between plant functional traits and plant attributes describing post-disturbance resilience.

  2. Measuring the Software Product Quality during the Software Development Life-Cycle: An ISO Standards Perspective

    OpenAIRE

    Rafa E. Al-Qutaish

    2009-01-01

    Problem statement: The International Organization for Standardization (ISO) published a set of international standards related to the software engineering, such as ISO 12207 and ISO 9126. However, there is a set of cross-references between the two standards. Approach: The ISO 9126 on software product quality and ISO 12207 on software life cycle processes had been analyzed to invistigate the relationships between them and to make a mapping from the ISO 9126 quality characteristics to the ISO 1...

  3. Defining product intake fraction to quantify and compare exposure to consumer products

    DEFF Research Database (Denmark)

    Jolliet, Oliver; Ernstoff, Alexi; Csiszar, Susan A.

    2015-01-01

    There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction...... of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example...... modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products...

  4. Intrinsically Disordered Segments Affect Protein Half-Life in the Cell and during Evolution

    Directory of Open Access Journals (Sweden)

    Robin van der Lee

    2014-09-01

    Full Text Available Precise control of protein turnover is essential for cellular homeostasis. The ubiquitin-proteasome system is well established as a major regulator of protein degradation, but an understanding of how inherent structural features influence the lifetimes of proteins is lacking. We report that yeast, mouse, and human proteins with terminal or internal intrinsically disordered segments have significantly shorter half-lives than proteins without these features. The lengths of the disordered segments that affect protein half-life are compatible with the structure of the proteasome. Divergence in terminal and internal disordered segments in yeast proteins originating from gene duplication leads to significantly altered half-life. Many paralogs that are affected by such changes participate in signaling, where altered protein half-life will directly impact cellular processes and function. Thus, natural variation in the length and position of disordered segments may affect protein half-life and could serve as an underappreciated source of genetic variation with important phenotypic consequences.

  5. Nutritional Combined Greenhouse Gas Life Cycle Analysis for Incorporating Canadian Yellow Pea into Cereal-Based Food Products

    Science.gov (United States)

    Marinangeli, Christopher P. F.; Tremorin, Denis

    2018-01-01

    Incorporating low cost pulses, such as yellow peas, that are rich in nutrients and low in fertilizer requirements, into daily food items, can improve the nutritional and sustainability profile of national diets. This paper systematically characterized the effect of using Canadian grown whole yellow pea and refined wheat flours on nutritional density and carbon footprint in cereal-based food products. Canada-specific production data and the levels of 27 macro- and micronutrients were used to calculate the carbon footprint and nutrient balance score (NBS), respectively, for traditional and reformulated pan bread, breakfast cereal, and pasta. Results showed that partial replacement of refined wheat flour with yellow pea flour increased the NBS of pan bread, breakfast cereal, and pasta by 11%, 70%, and 18%, and decreased the life cycle carbon footprint (kg CO2 eq/kg) by 4%, 11%, and 13%, respectively. The cultivation stage of wheat and yellow peas, and the electricity used during the manufacturing stage of food production, were the hotspots in the life cycle. The nutritional and greenhouse gas (GHG) data were combined as the nutrition carbon footprint score (NCFS) (NBS/g CO2 per serving), a novel indicator that reflects product-level nutritional quality per unit environmental impact. Results showed that yellow pea flour increased the NCFS by 15% for pan bread, 90% for breakfast cereal, and 35% for pasta. The results and framework of this study are relevant for food industry, consumers, as well as global and national policy-makers evaluating the effect of dietary change and food reformulation on nutritional and climate change targets. PMID:29659497

  6. Nutritional Combined Greenhouse Gas Life Cycle Analysis for Incorporating Canadian Yellow Pea into Cereal-Based Food Products

    Directory of Open Access Journals (Sweden)

    Abhishek Chaudhary

    2018-04-01

    Full Text Available Incorporating low cost pulses, such as yellow peas, that are rich in nutrients and low in fertilizer requirements, into daily food items, can improve the nutritional and sustainability profile of national diets. This paper systematically characterized the effect of using Canadian grown whole yellow pea and refined wheat flours on nutritional density and carbon footprint in cereal-based food products. Canada-specific production data and the levels of 27 macro- and micronutrients were used to calculate the carbon footprint and nutrient balance score (NBS, respectively, for traditional and reformulated pan bread, breakfast cereal, and pasta. Results showed that partial replacement of refined wheat flour with yellow pea flour increased the NBS of pan bread, breakfast cereal, and pasta by 11%, 70%, and 18%, and decreased the life cycle carbon footprint (kg CO2 eq/kg by 4%, 11%, and 13%, respectively. The cultivation stage of wheat and yellow peas, and the electricity used during the manufacturing stage of food production, were the hotspots in the life cycle. The nutritional and greenhouse gas (GHG data were combined as the nutrition carbon footprint score (NCFS (NBS/g CO2 per serving, a novel indicator that reflects product-level nutritional quality per unit environmental impact. Results showed that yellow pea flour increased the NCFS by 15% for pan bread, 90% for breakfast cereal, and 35% for pasta. The results and framework of this study are relevant for food industry, consumers, as well as global and national policy-makers evaluating the effect of dietary change and food reformulation on nutritional and climate change targets.

  7. Biocidal Products and Borderline Products

    OpenAIRE

    Yılmaz, Abdullah

    2015-01-01

    Biocidal product is defined as preparations sold in ready form to use that contains one or more active substances and has control effect, movement restriction or destruction against harmful organisms which has harmful effect on products that people use or produce or animals or environment. These substances which are composed mostly chemicals and ease our lifes are used in increasingly every areas of our life on the other hand they carry variety of risks and threaten our lives. In terms of env...

  8. Defining the baseline in social life cycle assessment

    DEFF Research Database (Denmark)

    Jørgensen, Andreas; Finkbeiner, Matthias; Jørgensen, Michael Søgaard

    2010-01-01

    A relatively broad consensus has formed that the purpose of developing and using the social life cycle assessment (SLCA) is to improve the social conditions for the stakeholders affected by the assessed product's life cycle. To create this effect, the SLCA, among other things, needs to provide...... valid assessments of the consequence of the decision that it is to support. The consequence of a decision to implement a life cycle of a product can be seen as the difference between the decision being implemented and 'non-implemented' product life cycle. This difference can to some extent be found...... using the consequential environmental life cycle assessment (ELCA) methodology to identify the processes that change as a consequence of the decision. However, if social impacts are understood as certain changes in the lives of the stakeholders, then social impacts are not only related to product life...

  9. Productive criticism, Part 2: A new environment for criticism. Performance appraisals and other real-life situations.

    Science.gov (United States)

    Weisinger, H D

    1996-01-01

    Criticism affects almost all aspects of your job: the quality of work you do, how you feel about it, and your relationships with your boss, coworkers, and subordinates. Used productively, criticism is a powerful tool that helps you improve your work, enhance your working relationships, increase your job satisfaction, and achieve better overall results. Improperly used, it impedes performance, demoralizes you, discourages you from wanting to try again, and creates friction in the workplace. In short, the ability to give and take criticism significantly determines how well you do on the job. In Part 1, we explained how to use productive criticism as an opportunity for the growth and education of subordinates. In Part 2, we will examine how you can productively criticize superiors and peers. We will also offer new performance appraisal technics and examine real-life criticism situations.

  10. The prosurvival activity of ascites against TRAIL is associated with a shorter disease-free interval in patients with ovarian cancer

    Directory of Open Access Journals (Sweden)

    Lane Denis

    2010-01-01

    Full Text Available Abstract Background The production of ascites is a common complication of ovarian cancer. Ascites constitute a unique tumor microenvironment that may affect disease progression. In this context, we recently showed that ovarian cancer ascites may protect tumor cells from TRAIL-induced apoptosis. In this study, we sought to determine whether the prosurvival effect of ascites affects disease-free intervals. Methods Peritoneal fluids were obtained from 54 women undergoing intra-abdominal surgery for suspected ovarian cancer (44 cancers and 10 benign diseases. The ability of peritoneal fluids to protect from TRAIL was assessed in the ovarian cancer cell line CaOV3, and IC50 were determined. The anti-apoptotic activity of 6 ascites against cisplatin, paclitaxel, doxorubicin, etoposide and vinorelbine was also assessed in CaOV3 cells, and the prosurvival activity of two ascites was assessed in 9 primary ovarian cancer cultures. Results Among the 54 peritoneal fluids tested, inhibition of TRAIL cytotoxicity was variable. Fluids originating from ovarian cancer were generally more protective than fluids from non-malignant diseases. Most of the 44 ovarian cancer ascites increased TRAIL IC50 and this inhibitory effect did not correlate strongly with the protein concentration in these ascites or the levels of serum CA125, a tumor antigen which is used in the clinic as a marker of tumor burden. The effect of ascites on cisplatin- and paclitaxel-induced cell death was assessed with 4 ascites having inhibitory effect on TRAIL-induced cell death and 2 that do not. The four ascites with prosurvival activity against TRAIL had some inhibitory on cisplatin and/or paclitaxel. Two ovarian cancer ascites, OVC346 and OVC509, also inhibited TRAIL cytotoxicity in 9 primary cultures of ovarian tumor and induced Akt activation in three of these primary cultures. Among a cohort of 35 patients with ascites, a threshold of TRAIL IC50 with ascites/IC50 without ascites > 2 was

  11. Genetic manipulation of longevity-related genes as a tool to regulate yeast life span and metabolite production during winemaking.

    Science.gov (United States)

    Orozco, Helena; Matallana, Emilia; Aranda, Agustín

    2013-01-02

    Yeast viability and vitality are essential for different industrial processes where the yeast Saccharomyces cerevisiae is used as a biotechnological tool. Therefore, the decline of yeast biological functions during aging may compromise their successful biotechnological use. Life span is controlled by a variety of molecular mechanisms, many of which are connected to stress tolerance and genomic stability, although the metabolic status of a cell has proven a main factor affecting its longevity. Acetic acid and ethanol accumulation shorten chronological life span (CLS), while glycerol extends it. Different age-related gene classes have been modified by deletion or overexpression to test their role in longevity and metabolism. Overexpression of histone deacetylase SIR2 extends CLS and reduces acetate production, while overexpression of SIR2 homolog HST3 shortens CLS, increases the ethanol level, and reduces acetic acid production. HST3 overexpression also enhances ethanol tolerance. Increasing tolerance to oxidative stress by superoxide dismutase SOD2 overexpression has only a moderate positive effect on CLS. CLS during grape juice fermentation has also been studied for mutants on several mRNA binding proteins that are regulators of gene expression at the posttranscriptional level; we found that NGR1 and UTH4 deletions decrease CLS, while PUF3 and PUB1 deletions increase it. Besides, the pub1Δ mutation increases glycerol production and blocks stress granule formation during grape juice fermentation. Surprisingly, factors relating to apoptosis, such as caspase Yca1 or apoptosis-inducing factor Aif1, play a positive role in yeast longevity during winemaking as their deletions shorten CLS. Manipulation of regulators of gene expression at both transcriptional (i.e., sirtuins) and posttranscriptional (i.e., mRNA binding protein Pub1) levels allows to modulate yeast life span during its biotechnological use. Due to links between aging and metabolism, it also influences the

  12. Impact of urinary incontinence on healthcare resource utilization, health-related quality of life and productivity in patients with overactive bladder.

    Science.gov (United States)

    Tang, Derek H; Colayco, Danielle C; Khalaf, Kristin M; Piercy, James; Patel, Vaishali; Globe, Denise; Ginsberg, David

    2014-03-01

    To evaluate the impact of urinary incontinence (UI) on healthcare resource utilization (HRU), health-related quality of life (HRQoL) and productivity measures in patients with overactive bladder (OAB). This retrospective, cross-sectional study used data from the Adelphi OAB/UI Disease Specific Programme, a multinational survey of patient- and physician-reported data, fielded between November 2010 and February 2011. The primary patient groups of interest were those with OAB, both with and without UI. Health-related quality of life and productivity measures were derived from the EuroQoL-5D, the Incontinence Quality of Life questionnaire, the Overactive Bladder Questionnaire, and the Work Productivity and Activity Impairment Questionnaire. Measures of HRU included OAB-related surgeries, OAB-related hospitalizations, incontinence pads, anticholinergic use and physician visits. Multivariate linear regression models and literature-based minimal clinically important differences were used to assess statistically significant and clinically meaningful differences in HRQoL and productivity measures between patients with OAB with UI and those without UI. A total of 1 730 patients were identified, with a mean age of 60.7 years, and 77.0% of them were women, 84.2% were non-Hispanic whites, and 71% were incontinent. Bivariate analyses showed that HRU was significantly higher among patients with OAB with UI than among those without UI in all categories except for the number of OAB-related physician visits. In both bivariate and multivariate analyses, incontinent patients presented with clinically and statistically significantly lower HRQoL and productivity measures with respect to all study endpoints, except for percentage of work time missed due to their OAB/UI. Urinary incontinence was associated with significantly higher HRU and lower HRQoL and productivity in this population of patients with OAB from five different countries. In addition to clinical considerations, the

  13. Recent developments in Life Cycle Assessment

    NARCIS (Netherlands)

    Finnveden, Göran; Hauschild, Michael Z.; Ekvall, Tomas; Guinée, Jeroen B.; Heijungs, Reinout; Hellweg, Stefanie; Koehler, Annette; Pennington, David; Suh, Sangwon

    2009-01-01

    Life Cycle Assessment is a tool to assess the environmental impacts and resources used throughout a product's life cycle, i.e., from raw material acquisition, via production and use phases, to waste management. The methodological development in LCA has been strong, and LCA is broadly applied in

  14. Food neophobia, nanotechnology and satisfaction with life.

    Science.gov (United States)

    Schnettler, Berta; Crisóstomo, Gloria; Sepúlveda, José; Mora, Marcos; Lobos, Germán; Miranda, Horacio; Grunert, Klaus G

    2013-10-01

    This study investigates the relationship between food neophobia, satisfaction with life and food-related life, and acceptance of the use of nanotechnology in food production. Questionnaire data was collected from a sample of 400 supermarket shoppers in southern Chile. The questionnaire measured knowledge of nanotechnology and willingness to purchase food products involving nanotechnology, and included the SWLS (Satisfaction with Life Scale), SWFL (Satisfaction with Food-related Life) and FNS (Food Neophobia Scale) scales. Using cluster analysis, four consumer types were distinguished with significant differences in their scores on the SWLS, SWFL and FNS. The types differed in their knowledge of nanotechnology, willingness to purchase foods involving nanotechnology, age, socioeconomic level and lifestyle. The least food-neophobic type had the highest levels of satisfaction with life and with food-related life and also had the highest acceptance of packaging and foods produced with nanotechnology. The results suggest that the degree of food neophobia is associated with satisfaction with life and with food-related life, as well as with the acceptance of products with nanotechnological applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. The Life Cycle Cost (LCC) of Life Support Recycling and Resupply

    Science.gov (United States)

    Jones, Harry W.

    2015-01-01

    Brief human space missions supply all the crew's water and oxygen from Earth. The multiyear International Space Station (ISS) program instead uses physicochemical life support systems to recycle water and oxygen. This paper compares the Life Cycle Cost (LCC) of recycling to the LCC of resupply for potential future long duration human space missions. Recycling systems have high initial development costs but relatively low durationdependent support costs. This means that recycling is more cost effective for longer missions. Resupplying all the water and oxygen requires little initial development cost but has a much higher launch mass and launch cost. The cost of resupply increases as the mission duration increases. Resupply is therefore more cost effective than recycling for shorter missions. A recycling system pays for itself when the resupply LCC grows greater over time than the recycling LCC. The time when this occurs is called the recycling breakeven date. Recycling will cost very much less than resupply for long duration missions within the Earth-Moon system, such as a future space station or Moon base. But recycling would cost about the same as resupply for long duration deep space missions, such as a Mars trip. Because it is not possible to provide emergency supplies or quick return options on the way to Mars, more expensive redundant recycling systems will be needed.

  16. MODE OF PRODUCTION ANS EDUCATION: QUESTIONS ON THE MODE OF LIFE: A CONTRIBUTION OF LEON TROTSKY

    Directory of Open Access Journals (Sweden)

    Celi Zulke Taffarel

    2009-06-01

    Full Text Available The text addresses the importance of consideration of the contribution of Leon Trotsky - when you look at the issue of mode of life resulting from the general production of existence - to think clearly articulate an educational proposal for the construction of socialist history project. The need to think the human based on the question of cultural activists, on the fight for a policy of cultural formation.

  17. A comparative life cycle analysis of low power PV lighting products for rural areas in South East Asia

    NARCIS (Netherlands)

    Durlinger, Bart; Durlinger, B.P.J.; Reinders, Angelina H.M.E.; Toxopeus, Marten E.

    2012-01-01

    This paper evaluates the environmental effects of low power PV lighting products, which are increasingly used in rural areas in South East Asia, by means of a life cycle analysis (LCA). The main goals of the project are to determine (1) the environmental impacts, (2) which parts are contributing to

  18. A worksite vegan nutrition program is well-accepted and improves health-related quality of life and work productivity.

    Science.gov (United States)

    Katcher, Heather I; Ferdowsian, Hope R; Hoover, Valerie J; Cohen, Joshua L; Barnard, Neal D

    2010-01-01

    Vegetarian and vegan diets are effective in preventing and treating several chronic diseases. However, their acceptability outside a clinical trial setting has not been extensively studied. The aim of this study was to determine the acceptability of a worksite vegan nutrition program and its effects on health-related quality of life and work productivity. Employees of a major insurance corporation with a body mass index > or =25 kg/m(2) and/or a previous diagnosis of type 2 diabetes received either weekly group instruction on a low-fat vegan diet (n = 68) or received no diet instruction (n = 45) for 22 weeks. The vegan group reported improvements in general health (p = 0.002), physical functioning (p = 0.001), mental health (p = 0.03), vitality (p = 0.004), and overall diet satisfaction (p vegan group also reported a decrease in food costs (p = 0.003), and increased difficulty finding foods when eating out (p = 0.04) compared with the control group. The vegan group reported a 40-46% decrease in health-related productivity impairments at work (p = 0.03) and in regular daily activities (p = 0.004). A worksite vegan nutrition program is well-accepted and can be implemented by employers to improve the health, quality of life, and work productivity of employees.

  19. Caed Interactions During A Product Life Cycle Oriented Towards the Decision-Making in the Design of Polymeric Elements

    Science.gov (United States)

    Suffo, M.

    2017-08-01

    In this work, we present the real case of an industrial product was placed prematurely on the market without having checked the different stages of its life cycle. This type of products must be validated by numerical methods and by mechanical tests to verify their rheological behavior. In particular, the product consists of two small pieces in contact, one made of HDPE and the other one corresponding to a stainless steel. The polymeric piece supports the metal pressure under a constant static load over time. As a result of normal operation, the polymer experienced a “crazing” breakdown, which caused the failure to occur. In the study, design methods and computer assisted analysis software (CAED) have been used. These methods were complemented by scanning electron microscopy that confirmed the initial failure hypothesis. Using the finite element method (FEM), a series of load scenarios were carried out, where the different load hypothesis the product must go through prior to its placing on the market were simulated. It is shown that the failure was initiated by stress concentration on one of the edges of the polymeric piece. The proposed solution of the problem based on the analysis focuses on a simple redesign of the piece, which should have been round, or to the reduction of the thickness of the metal piece. As a result of the alteration of its natural life cycle, the company assumed both monetary costs and the definitive loss of customer confidence.

  20. Life cycle water use of energy production and its environmental impacts in China.

    Science.gov (United States)

    Zhang, Chao; Anadon, Laura Diaz

    2013-12-17

    The energy sector is a major user of fresh water resources in China. We investigate the life cycle water withdrawals, consumptive water use, and wastewater discharge of China's energy sectors and their water-consumption-related environmental impacts, using a mixed-unit multiregional input-output (MRIO) model and life cycle impact assessment method (LCIA) based on the Eco-indicator 99 framework. Energy production is responsible for 61.4 billion m(3) water withdrawals, 10.8 billion m(3) water consumption, and 5.0 billion m(3) wastewater discharges in China, which are equivalent to 12.3%, 4.1% and 8.3% of the national totals, respectively. The most important feature of the energy-water nexus in China is the significantly uneven spatial distribution of consumptive water use and its corresponding environmental impacts caused by the geological discrepancy among fossil fuel resources, fresh water resources, and energy demand. More than half of energy-related water withdrawals occur in the east and south coastal regions. However, the arid north and northwest regions have much larger water consumption than the water abundant south region, and bear almost all environmental damages caused by consumptive water use.

  1. Towards shorter wavelength x-ray lasers using a high power, short pulse pump laser

    International Nuclear Information System (INIS)

    Tighe, W.; Krushelnick, K.; Valeo, E.; Suckewer, S.

    1991-05-01

    A near-terawatt, KrF* laser system, focussable to power densities >10 18 W/cm 2 has been constructed for use as a pump laser in various schemes aimed at the development of x-ray lasing below 5nm. The laser system along with output characteristics such as the pulse duration, the focal spot size, and the percentage of amplified spontaneous emission (ASE) emitted along with the laser pulse will be presented. Schemes intended to lead to shorter wavelength x-ray emission will be described. The resultant requirements on the pump laser characteristics and the target design will be outlined. Results from recent solid target experiments and two-laser experiments, showing the interaction of a high-power, short pulse laser with a preformed plasma, will be presented. 13 refs., 5 figs

  2. Accelerated Shelf Life Testing of Jackfruit Extract Powder

    Directory of Open Access Journals (Sweden)

    Enny Hawani Loebis

    2013-06-01

    Full Text Available Jackfruit is a potential tropical fruit as raw material for food industry. Jackfruit could be processed by co-crystallization technique to extend its shelf life and increase its value. This research was conducted to study and to determine the shelf life of jackfruit powder extract. Shelf life test is conducted using variety of treatments such as: anti-caking types and temperature storage. The results showed that the shelf life of the jackfruit extract powder using anti-caking of magnesium oxide (MO, magnesium carbonate (MC, dan magnesium silicate (MS, which is store in the temperature of 27°C, were: 8.06, 5.42, and 5.5 months respectively. The variation of anti-caking type was significantly affect the product shelf life.  The effect of storage temperature on the product shelf life is more significant for the product using anti-caking MO compared with product using anti-caking MC and MS.

  3. Life cycle environmental impacts of bioethanol production from sugarcane molasses in Iran.

    Science.gov (United States)

    Farahani, Saeid Shahvarooghi; Asoodar, Mohammad Amin

    2017-10-01

    In recent years, bioethanol from sugarcane molasses has been produced on an industrial scale in Iran. The aim of this study was to evaluate molasses-based bioethanol production from an environmental point of view. Data were collected from Debel Khazai agro-industry situated in southern region of Iran by using face-to-face interviews and annual statistics of 2010 to 2016 (6-year life cycle of sugarcane cultivation). Ten impact categories including abiotic depletion (AD), acidification (AC), eutrophication (EP), global warming potential (GWP), ozone layer depletion (OLD), human toxicity (HT), freshwater aquatic ecotoxicity (FE), marine aquatic ecotoxicity (ME), terrestrial ecotoxicity (TE), and photochemical oxidation (PO) were selected based on CML methodology. Inventory data for production of the inputs were taken from Ecoinvent, BUWAL 250, and IDMAT 2001 databases. The results revealed that in sugarcane cultivation process, electricity and trash burning were the most important contributors to all impact categories except OLD and TE. In industrial phase, natural gas had the highest contribution to the most impact categories. Greenhouse gas (GHG) emission for production of 1000 L molasses-based bioethanol was 1322.78 kg CO 2  eq. By comparing total GHG emissions from 1000 L bioethanol to gasoline, the net avoided GHG emissions came out at 503.17 kg CO 2  eq. According to results, it is clear that with increasing irrigation efficiency and improving performance of heating systems in industrial phase, environmental burdens would be significantly reduced.

  4. Long-Term Costs and Health Consequences of Issuing Shorter Duration Prescriptions for Patients with Chronic Health Conditions in the English NHS.

    Science.gov (United States)

    Martin, Adam; Payne, Rupert; Wilson, Edward Cf

    2018-06-01

    The National Health Service (NHS) in England spends over £9 billion on prescription medicines dispensed in primary care, of which over two-thirds is accounted for by repeat prescriptions. Recently, GPs in England have been urged to limit the duration of repeat prescriptions, where clinically appropriate, to 28 days to reduce wastage and hence contain costs. However, shorter prescriptions will increase transaction costs and thus may not be cost saving. Furthermore, there is evidence to suggest that shorter prescriptions are associated with lower adherence, which would be expected to lead to lower clinical benefit. The objective of this study is to estimate the cost-effectiveness of 3-month versus 28-day repeat prescriptions from the perspective of the NHS. We adapted three previously developed UK policy-relevant models, incorporating transaction (dispensing fees, prescriber time) and drug wastage costs associated with 3-month and 28-day prescriptions in three case studies: antihypertensive medications for prevention of cardiovascular events; drugs to improve glycaemic control in patients with type 2 diabetes; and treatments for depression. In all cases, 3-month prescriptions were associated with lower costs and higher QALYs than 28-day prescriptions. This is driven by assumptions that higher adherence leads to improved disease control, lower costs and improved QALYs. Longer repeat prescriptions may be cost-effective compared with shorter ones. However, the quality of the evidence base on which this modelling is based is poor. Any policy rollout should be within the context of a trial such as a stepped-wedge cluster design.

  5. Job strain and loss of healthy life years between ages 50 and 75 by sex and occupational position: analyses of 64 934 individuals from four prospective cohort studies.

    Science.gov (United States)

    Magnusson Hanson, Linda L; Westerlund, Hugo; Chungkham, Holendro S; Vahtera, Jussi; Rod, Naja H; Alexanderson, Kristina; Goldberg, Marcel; Kivimäki, Mika; Stenholm, Sari; Platts, Loretta G; Zins, Marie; Head, Jenny

    2018-05-07

    Poor psychosocial working conditions increase the likelihood of various types of morbidity and may substantially limit quality of life and possibilities to remain in paid work. To date, however, no studies to our knowledge have quantified the extent to which poor psychosocial working conditions reduce healthy or chronic disease-free life expectancy, which was the focus of this study. Data were derived from four cohorts with repeat data: the Finnish Public Sector Study (Finland), GAZEL (France), the Swedish Longitudinal Occupational Survey of Health (Sweden) and Whitehall II (UK). Healthy (in good self-rated health) life expectancy (HLE) and chronic disease-free (free from cardiovascular disease, cancer, respiratory disease and diabetes) life expectancy (CDFLE) was calculated from age 50 to 75 based on 64 394 individuals with data on job strain (high demands in combination with low control) at baseline and health at baseline and follow-up. Multistate life table models showed that job strain was consistently related to shorter HLE (overall 1.7 years difference). The difference in HLE was more pronounced among men (2.0 years compared with 1.5 years for women) and participants in lower occupational positions (2.5 years among low-grade men compared with 1.7 years among high-grade men). Similar differences in HLE, although smaller, were observed among those in intermediate or high occupational positions. Job strain was additionally associated with shorter CDFLE, although this association was weaker and somewhat inconsistent. These findings suggest that individuals with job strain have a shorter health expectancy compared with those without job strain. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  6. A field experiment demonstrating plant life-history evolution and its eco-evolutionary feedback to seed predator populations.

    Science.gov (United States)

    Agrawal, Anurag A; Johnson, Marc T J; Hastings, Amy P; Maron, John L

    2013-05-01

    The extent to which evolutionary change occurs in a predictable manner under field conditions and how evolutionary changes feed back to influence ecological dynamics are fundamental, yet unresolved, questions. To address these issues, we established eight replicate populations of native common evening primrose (Oenothera biennis). Each population was planted with 18 genotypes in identical frequency. By tracking genotype frequencies with microsatellite DNA markers over the subsequent three years (up to three generations, ≈5,000 genotyped plants), we show rapid and consistent evolution of two heritable plant life-history traits (shorter life span and later flowering time). This rapid evolution was only partially the result of differential seed production; genotypic variation in seed germination also contributed to the observed evolutionary response. Since evening primrose genotypes exhibited heritable variation for resistance to insect herbivores, which was related to flowering time, we predicted that evolutionary changes in genotype frequencies would feed back to influence populations of a seed predator moth that specializes on O. biennis. By the conclusion of the experiment, variation in the genotypic composition among our eight replicate field populations was highly predictive of moth abundance. These results demonstrate how rapid evolution in field populations of a native plant can influence ecological interactions.

  7. Inequalities in US Life Expectancy by Area Unemployment Level, 1990–2010

    Directory of Open Access Journals (Sweden)

    Gopal K. Singh

    2016-01-01

    Full Text Available This study examined the association between unemployment and life expectancy in the United States during 1990–2010. Census-based unemployment rates were linked to US county-level mortality data. Life expectancies were calculated by age, sex, race, and unemployment level during 1990–2010. Differences in life expectancy were decomposed by age and cause of death. Life expectancy was consistently lower in areas with higher unemployment rates. In 2006–2010, those in areas with high unemployment rates (≥9% had a life expectancy of 76.9 years, compared with 80.7 years for those in areas with low unemployment rates (<3%. The association between unemployment and life expectancy was stronger for men than for women. Life expectancy ranged from 69.9 years among black men in high unemployment areas to 90.0 years among Asian/Pacific Islander women in low unemployment areas. Disparities persisted over time. In 1990–1992, life expectancy was 4.7 years shorter in high unemployment than in low unemployment areas. In 2006–2010, the life expectancy difference between the lowest and highest unemployment areas decreased to 3.8 years. Heart disease, cancer, homicide, unintentional injuries, diabetes, HIV/AIDS, and liver cirrhosis contributed most to the lower life expectancy in high unemployment areas. High unemployment areas recorded larger gains in life expectancy than low unemployment areas, contributing to the narrowing gap during 1990–2010.

  8. Environmental analysis of natural gas life cycle

    International Nuclear Information System (INIS)

    Riva, A.; D'Angelosante, S.; Trebeschi, C.

    2000-01-01

    Life Cycle Assessment is a method aimed at identifying the environmental effects connected with a given product, process or activity during its whole life cycle. The evaluation of published studies and the application of the method to electricity production with fossil fuels, by using data from published databases and data collected by the gas industry, demonstrate the importance and difficulties to have reliable and updated data required for a significant life cycle assessment. The results show that the environmental advantages of natural gas over the other fossil fuels in the final use stage increase still further if the whole life cycle of the fuels, from production to final consumption, is taken into account [it

  9. Environmental Life Cycle Assessment of long-term organic rice production in a Subtropical area of China

    DEFF Research Database (Denmark)

    Xueqing, He; Qiao, Yuhui; Liang, Long

    2018-01-01

    a considerable environmental impact and changing from conventional to organic rice cultivation might therefore have a potentially great impact. Meanwhile, it takes time for the organic farming systems to reach a new steady state after conversion to organic. Thus, the environmental profile of the organic products...... will change over time and it is therefore important to examine whether the difference to conventional will be reduced (and disappear) or be increased over time. The aim of the present study was therefore to assess the environmental impact of organic rice production 5 (OR5), 10 (OR10) and 15 (OR15) years since...... conversion and compare it to conventional rice (CR) in subtropical China. The life cycle assessment (LCA) method was used to assess environmental impact of rice production systems with regard to nine environmental impact categories: Non-renewable Energy Depletion (NED), Water Depletion (WD), Land Occupation...

  10. Mortality and life expectancy of people with alcohol use disorder in Denmark, Finland and Sweden

    DEFF Research Database (Denmark)

    Westman, J; Wahlbeck, K; Laursen, T M

    2014-01-01

    OBJECTIVE: To analyse mortality and life expectancy in people with alcohol use disorder in Denmark, Finland and Sweden. METHOD: A population-based register study including all patients admitted to hospital diagnosed with alcohol use disorder (1 158 486 person-years) from 1987 to 2006 in Denmark......, Finland and Sweden. RESULTS: Life expectancy was 24-28 years shorter in people with alcohol use disorder than in the general population. From 1987 to 2006, the difference in life expectancy between patients with alcohol use disorder and the general population increased in men (Denmark, 1.8 years; Finland......, 2.6 years; Sweden, 1.0 years); in women, the difference in life expectancy increased in Denmark (0.3 years) but decreased in Finland (-0.8 years) and Sweden (-1.8 years). People with alcohol use disorder had higher mortality from all causes of death (mortality rate ratio, 3.0-5.2), all diseases...

  11. Use of edible films and coatings to extend the shelf life of food products.

    Science.gov (United States)

    Maftoonazad, Neda; Badii, Fojan

    2009-06-01

    The increased consumer demand for high quality, extended shelf life, ready to eat foods has initiated the development of several innovative techniques to keep their natural and fresh appearance as long as possible and at the same time render them safe. Packaging has been an important element in these preservation concepts for providing the appropriate (mechanical and functional) protection to the commodity. Since synthetic packaging materials contribute to the environmental pollution, edible coatings and packages have been proposed to replace or complement conventional packaging. Biodegradable and edible films and coatings are made from naturally occurring polymers and functional ingredients, and formed on the surface of food products. Edible films and coating have long been known to protect perishable food products from deterioration and reduce quality loss. These films should have acceptable sensory characteristics, appropriate barrier properties (CO(2), O(2), water, oil), microbial, biochemical and physicochemical stability, they should be safe, and be produced by simple technology in low cost. Also they can act as effective carrier for antioxidant, flavor, color, nutritional or anti-microbial additives. Patents on edible films and food products are also discussed in this article.

  12. A compilation of life cycle studies for six household detergent product categories in Europe: the basis for product-specific A.I.S.E. Charter Advanced Sustainability Profiles.

    Science.gov (United States)

    Golsteijn, Laura; Menkveld, Rimousky; King, Henry; Schneider, Christine; Schowanek, Diederik; Nissen, Sascha

    2015-01-01

    A.I.S.E., the International Association for Soaps, Detergents and Maintenance Products, launched the 'A.I.S.E. Charter for Sustainable Cleaning' in Europe in 2005 to promote sustainability in the cleaning and maintenance products industry. This Charter is a proactive programme for translating the concept of sustainable innovation into reality and actions. Per product category, life cycle assessments (LCA) are used to set sustainability criteria that are ambitious, but also achievable by all market players. This paper presents and discusses LCAs of six household detergent product categories conducted for the Charter, i.e.: manual dishwashing detergents, powder and tablet laundry detergents, window glass trigger spray cleaners, bathroom trigger spray cleaners, acid toilet cleaners, and bleach toilet cleaners. Relevant impact categories are identified, as well as the life cycle stages with the largest contribution to the environmental impact. It was concluded that the variables that mainly drive the results (i.e. the environmental hotspots) for manual dishwashing detergents and laundry detergents were the water temperature, water consumption (for manual dishwashing detergents), product dosage (for laundry detergents), and the choice and amount of surfactant. By contrast, for bathroom trigger sprays, acid and bleach toilet cleaners, the driving factors were plastic packaging, transportation to retailer, and specific ingredients. Additionally, the type of surfactant was important for bleach toilet cleaners. For window glass trigger sprays, the driving factors were the plastic packaging and the type of surfactant, and the other ingredients were of less importance. A.I.S.E. used the results of the studies to establish sustainability criteria, the so-called 'Charter Advanced Sustainability Profiles', which led to improvements in the marketplace.

  13. Environmental impacts of irrigated and rain-fed barley production in Iran using life cycle assessment (LCA)

    Energy Technology Data Exchange (ETDEWEB)

    Houshyar, E.

    2017-07-01

    Current intensive grain crops production is often associated with environmental burdens. However, very few studies deal with the environmental performance of both current and alternative systems of barley production. This study was undertaken to evaluate energy consumption and environmental impacts of irrigated and rain-fed barley production. Additionally, three alternative scenarios were examined for irrigated barley fields including conservation tillage and biomass utilization policies. The findings showed that around 25 GJ/ha energy is needed in order to produce 2300 kg/ha irrigated barley and 13 GJ/ha for 1100 kg/ha rain-fed barley. Life cycle assessment (LCA) results indicated that irrigated farms had more environmental impacts than rain-fed farms. Electricity generation and consumption had the highest effect on the abiotic depletion potential, human toxicity potential, freshwater and marine aquatic ecotoxicity potential. However, alternative scenarios revealed that using soil conservation tillage systems and biomass consumption vs. gas for electricity generation at power plants can significantly mitigate environmental impacts of irrigated barley production similar to the rain-fed conditions while higher yield is obtained.

  14. Environmental impacts of irrigated and rain-fed barley production in Iran using life cycle assessment (LCA)

    International Nuclear Information System (INIS)

    Houshyar, E.

    2017-01-01

    Current intensive grain crops production is often associated with environmental burdens. However, very few studies deal with the environmental performance of both current and alternative systems of barley production. This study was undertaken to evaluate energy consumption and environmental impacts of irrigated and rain-fed barley production. Additionally, three alternative scenarios were examined for irrigated barley fields including conservation tillage and biomass utilization policies. The findings showed that around 25 GJ/ha energy is needed in order to produce 2300 kg/ha irrigated barley and 13 GJ/ha for 1100 kg/ha rain-fed barley. Life cycle assessment (LCA) results indicated that irrigated farms had more environmental impacts than rain-fed farms. Electricity generation and consumption had the highest effect on the abiotic depletion potential, human toxicity potential, freshwater and marine aquatic ecotoxicity potential. However, alternative scenarios revealed that using soil conservation tillage systems and biomass consumption vs. gas for electricity generation at power plants can significantly mitigate environmental impacts of irrigated barley production similar to the rain-fed conditions while higher yield is obtained.

  15. Relationships between Flow Experience, Life Meaningfulness and Subjective Well-being in Music Students

    Directory of Open Access Journals (Sweden)

    Martin Sedlár

    2014-01-01

    Full Text Available The study examines relationships between flow experience in musical activities, life meaningfulness and subjective well – being. Life meaningfulness belongs to eudaimonic good life, subjective well–being belongs to hedonic good life and flow seems to be combination of both approaches. It is supposed that flow experience in musical activity and life meaningfulness should have positive impact on subjective well –being. The research sample consisted of 96 university music students (37 males, 59 females from the Music and Dance Faculty, Academy of Performing Arts in Bratislava, Slovakia. Dispositional Flow Scale–2, which measures nine dimension of flow, was used for measuring frequency o f flow experience. Life Meaningfulness Scale, which measures three dimensions of life meaningfulness, was used for measuring meaningfulness of life. Positive and Negative Affect Schedule measured affective components of subjective well–being, and Satisfaction with Life Scale measured cognitive component of subjective well–being. Categorization revealed that the most favourite performing musical activities are creative musical activities, such as reproduction and production, during which music students relatively often experience flow. The results of correlation analysis showed that total scores of flow experience, life meaningfulness and components of subjective well–being, significantly correlate each other. Aspects of flow, clear goals and autotelic experience are positively related to cognitive and motivational dimension of life meaningfulness and also to positive affectivity. Loss of self–consciousness and autotelic experience are positively related to emotional dimension of life meaningfulness. Challenge–skill balance, action–awareness merging, clear goals, concentration on task at hand, sense of control and autotelic experience are negatively related to negative affectivity. Challenge–skill balance and autotelic experience are related to

  16. On the Limitation of Warranty Duration.

    OpenAIRE

    Emons, Winand

    1989-01-01

    This paper analyzes the frequently-observed phenomenon that firms offer product warranties that are of much shorter duration than the life expectancy of these products. It is shown that competitive equilibria may entail limitation of warranty duration if firms face adverse selection problems with respect to different consumers. Copyright 1989 by Blackwell Publishing Ltd.

  17. Remote Sensing of Clouds And Precipitation: Event-Based Characterization, Life Cycle Evolution, and Aerosol Influences

    Science.gov (United States)

    Esmaili, Rebekah Bradley

    Global climate models, numerical weather prediction, and flood models rely on accurate satellite precipitation products, which are the only datasets that are continuous in time and space across the globe. While there are more earth observing satellites than ever before, gaps in precipitation retrievals exist due to sensor and orbital limitations of low-earth (LEO) satellites, which are overcome by merging data from different sensors in satellite precipitation products (SPPs). Using cloud tracking at higher resolutions than the spatio-temporal scales of LEO satellites, this thesis examines how clouds typically form in the atmosphere, the rate that cloud size and temperature evolve over the life cycle, and the time of day that cloud development take place. This thesis found that cloud evolution was non-linear, which disagrees with the linear interpolation schemes used in SPPs. Longer lasting clouds tended to achieve their temperature and size maturity milestones at different times, while these stages often occurred simultaneously in shorter lasting clouds. Over the ocean, longer lasting clouds were found to occur more frequently at night, while shorter lasting clouds were more common during the daytime. This thesis also examines whether large-scale Saharan dust outbreaks can impact the trajectories and intensity of cloud clusters in the tropical Atlantic, which is predicted by modeling studies. The presented results show that proximity to Saharan dust outbreaks shifts Atlantic cloud development northward and intense storms becoming more common, whereas on days with low dust loading small-scale, warmer clouds are more common. A simplified view of cloud evolution in merged rainfall retrievals is a possible source of errors, which can propagate into higher level analysis. This thesis investigates the difference in the intensity, duration, and frequency of precipitation in IMERG, a next-generation satellite precipitation product with ground radar observations over the

  18. Life Cycle Assessment of Greenhouse Gas Emissions

    NARCIS (Netherlands)

    Reijnders, L.; Chen, W.Y.; Suzuki, T.; Lackner, M.

    2015-01-01

    Life cycle assessments of greenhouse gas emissions have been developed for analyzing products "from cradle to grave": from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production, and waste

  19. Effect of habitat preference on frond life span in three Cyathea tree ferns

    Science.gov (United States)

    Chiu, Tzu Yun; Wang, Hsiang Hua; Lun Kuo, Yao; Kume, Tomonori

    2013-04-01

    It has been reported that plants living in various geographical areas had different physiological forms, as factors of microenvironment have strong impacts on physiological characters. However, the physiological characters of fronds have been scarcely reported in ferns. In this study, we investigated physiological differences in response to the habitat preference in the three tree ferns in northeast Taiwan, Cyathea lepifera, C. spinulosa, and C. podophylla, prefer to open site, edge of forest, and interior forest, respectively. The canopy openness above the individuals of C. lepifera, C. spinulosa and C. podophylla were 29.2 ± 14.10 , 7.0 ± 3.07 and 5.0 ± 2.24 %, respectively. Among three species, C. podophylla had the longest frond life span (13.0 ± 4.12 months) than the two others (C. lepifera (6.8 ± 1.29 months) and C. spinulosa (7.3 ±1.35 months). Our result supported the general patterns that shade intolerant species have a shorter leaf life span than shade tolerant species. The maximum net CO2 assimilation of C. lepifera, C. spinulosa and C. podophylla were 11.46 ± 1.34, 8.27 ± 0.69, and 6.34 ± 0.54 μmol CO2 m-2 s-1, respectively. As well, C. lepifera had the highest photosynthetic light saturation point (LSP), while C. podophylla had the lowest LSP among these three tree ferns. These suggested that C. lepifera could be more efficient for capturing and utilizing light resources under the larger canopy openness condition than the other two species. We also found that frond C : N ratio were positively correlated with frond life span among species. C. podophylla, with the longest frond life span, had the highest frond C : N ratio (22.17 ± 1.95), which was followed by C. spinulosa (18.58 ± 1.37) and C. lepifera (18.68 ± 2.63) with shorter frond life span. The results were consistent to the theory that the fronds and leaves of shade intolerant species have high photosynthetic abilities with low C : N ratio. Key words: Canopy openness, frond life span

  20. Inclusive fitness and differential productivity across the life course determine intergenerational transfers in a small-scale human society.

    Science.gov (United States)

    Hooper, Paul L; Gurven, Michael; Winking, Jeffrey; Kaplan, Hillard S

    2015-03-22

    Transfers of resources between generations are an essential element in current models of human life-history evolution accounting for prolonged development, extended lifespan and menopause. Integrating these models with Hamilton's theory of inclusive fitness, we predict that the interaction of biological kinship with the age-schedule of resource production should be a key driver of intergenerational transfers. In the empirical case of Tsimane' forager-horticulturalists in Bolivian Amazonia, we provide a detailed characterization of net transfers of food according to age, sex, kinship and the net need of donors and recipients. We show that parents, grandparents and siblings provide significant net downward transfers of food across generations. We demonstrate that the extent of provisioning responds facultatively to variation in the productivity and demographic composition of families, as predicted by the theory. We hypothesize that the motivation to provide these critical transfers is a fundamental force that binds together human nuclear and extended families. The ubiquity of three-generational families in human societies may thus be a direct reflection of fundamental evolutionary constraints on an organism's life-history and social organization.

  1. Investigating the road surface effect to the fatigue life of an automotive coil spring

    Science.gov (United States)

    Putra, T. E.; Husaini

    2018-05-01

    This work aims to estimate the life of a coil spring considering road surface profiles. Strain signals were measured by installing a strain gage at the highest stress location of the coil spring and then driving the vehicle on country and village roads. The village road gave high amplitudes containing spikes when the tire touched a curb, bump or pothole. These conditions contributed to a higher loading rate to the car component, contributing to shorter useful fatigue life, which was only 140 reversals of blocks. Driving on the village road resulted in a 6-times decrease in the useful fatigue life of the component in comparison to the country road. In conclusion, the village road caused stronger vibrations to the component because it has a rough surface; meanwhile, the country road provided lower vibrations because the road was smooth.

  2. Inflammatory bowel disease: Greek patients' perspective on quality of life, information on the disease, work productivity and family support.

    Science.gov (United States)

    Viazis, Nikos; Mantzaris, Gerasimos; Karmiris, Konstantinos; Polymeros, Dimitrios; Kouklakis, George; Maris, Theofanis; Karagiannis, John; Karamanolis, Dimitrios G

    2013-01-01

    The aim of this study was to identify inflammatory bowel disease (IBD) patients' perspectives regarding everyday life issues. From October 2010 till April 2011, 1,181 IBD patients completed an anonymous questionnaire through the internet (827 cases) or at the outpatient clinic of the participating centers (354 cases), aiming to identify: a) the impact of disease on social life, emotional status and work productivity; b) the source of disease information; and c) the level of support from family members and friends. Fifty-five percent of the patients reported that IBD interferes with their social life, while 65% felt stressed, 60% depressed and 19% tired because of it. Disease information (physician/ internet) was reported only by 31%, while 26% admitted not discussing their therapy with their gastroenterologist. Forty percent felt that the health service they receive is not satisfactory, with 76% desiring more gastroenterologists, 67% more outpatient clinics, 49% more dieticians and 42% more psychologists specialized in IBD. IBD interfered with working capacity in 40% of the participants, while 57% needed time off of work (ranging from 1-20 days per year). One of three patients (32%) has not informed his work environment about the disease; however, 88% had the support of their family and friends for coping with it. Greek IBD patients claim that health-related social life, emotional status and work productivity are severely affected by their disease, whereas they complain about lack of information regarding the therapy. These unmet demands call for immediate action by healthcare providers and society.

  3. Life-Cycle Energy and GHG Emissions of Forest Biomass Harvest and Transport for Biofuel Production in Michigan

    Directory of Open Access Journals (Sweden)

    Fengli Zhang

    2015-04-01

    Full Text Available High dependence on imported oil has increased U.S. strategic vulnerability and prompted more research in the area of renewable energy production. Ethanol production from renewable woody biomass, which could be a substitute for gasoline, has seen increased interest. This study analysed energy use and greenhouse gas emission impacts on the forest biomass supply chain activities within the State of Michigan. A life-cycle assessment of harvesting and transportation stages was completed utilizing peer-reviewed literature. Results for forest-delivered ethanol were compared with those for petroleum gasoline using data specific to the U.S. The analysis from a woody biomass feedstock supply perspective uncovered that ethanol production is more environmentally friendly (about 62% less greenhouse gas emissions compared with petroleum based fossil fuel production. Sensitivity analysis was conducted with key inputs associated with harvesting and transportation operations. The results showed that research focused on improving biomass recovery efficiency and truck fuel economy further reduced GHG emissions and energy consumption.

  4. Discrimination of Urban Spaces with Different Level of Restorativeness Based on the Original and on a Shorter Version of Hartig et al.’s Perceived Restorativeness Scale

    Directory of Open Access Journals (Sweden)

    Fátima Negrín

    2017-10-01

    Full Text Available Restorativeness is defined as the potential of the environment to re-establish certain cognitive capacities related to human information processing. The most frequently used instrument for evaluating the restorativeness of places is the Perceived Restorativeness Scale, proposed by Hartig et al. (1991. Later on, shorter versions of the Perceived Restorativeness Scale were proposed. The aim of this work is to evaluate the discriminatory capacity of the original and of a shorter Spanish version of the PRS, considering urban settings previously selected for having different level of restorativeness, according to expert’s criteria. The study involved 244 students and used a 3 × 2 mixed experimental design, with two independent variables: Restorativeness of a place (between-subjects, which was manipulated by showing pictures of settings selected with varying levels of restorativeness (high, medium, low, and length of the scale (within-subjects, which was manipulated by asking subjects to fill in both the original and a shorter version of the PRS. The order of presentation of the two scales was counterbalanced. Results show an appropriate reliability for both version of the scale. Items of being-away, fascination, and coherence of the shorter scale correlate more strongly with the corresponding factor of the original scale, compared to the others factors. Both scales produce similar values for the perceived restorativeness of the different places, except for places with low restorativeness.

  5. Life cycle greenhouse gas (GHG) impacts of a novel process for converting food waste to ethanol and co-products

    International Nuclear Information System (INIS)

    Ebner, Jacqueline; Babbitt, Callie; Winer, Martin; Hilton, Brian; Williamson, Anahita

    2014-01-01

    Highlights: • Co-fermentation using SSF at ambient temperature has potential as an ethanol pathway. • Bio-refinery GHG emissions are similar to corn and MSW ethanol production processes. • Net production GHG impact is negative with inclusion of waste disposal avoidance. • Food waste diversion from landfills is the largest contributor to GHG benefits. - Abstract: Waste-to-ethanol conversion is a promising technology to provide renewable transportation fuel while mitigating feedstock risks and land use conflicts. It also has the potential to reduce environmental impacts from waste management such as greenhouse gas (GHG) emissions that contribute to climate change. This paper analyzes the life cycle GHG emissions associated with a novel process for the conversion of food processing waste into ethanol (EtOH) and the co-products of compost and animal feed. Data are based on a pilot plant co-fermenting retail food waste with a sugary industrial wastewater, using a simultaneous saccharification and fermentation (SSF) process at room temperature with a grinding pretreatment. The process produced 295 L EtOH/dry t feedstock. Lifecycle GHG emissions associated with the ethanol production process were 1458 gCO 2 e/L EtOH. When the impact of avoided landfill emissions from diverting food waste to use as feedstock are considered, the process results in net negative GHG emissions and approximately 500% improvement relative to corn ethanol or gasoline production. This finding illustrates how feedstock and alternative waste disposal options have important implications in life cycle GHG results for waste-to-energy pathways

  6. Half-life measurement of 89Rb

    International Nuclear Information System (INIS)

    Guo Xiaoqing; Yuan Daqing; Xu Lijun; Chen Kesheng; Wu Yongle; Zheng Yanming; Yao Shunhe

    2013-01-01

    89 Rb is an important fission product used for monitoring possible release of fission products from fuel element. The half-life is one of important nuclear parameters. The half-life of 89 Rb was determined using reference source method with two sets of HPGe detectors by place-relay way. In reference source method, the ratio of net full- energy peak areas from the measure nuclide and the reference source was used to avoid the count correction caused by dead time and pileup. For the very short half-life of 89 Rb, the half-life iterative method was used in data analysis and the translation method was used in data unification. Finally, the measured half-life of 89 Rb is (14.41±0.04) min. (authors)

  7. Life cycle assessment of greenhouse gas emissions

    NARCIS (Netherlands)

    Reijnders, L.; Chen, W.Y.; Seiner, J.; Suzuki, T.; Lackner, M.

    2012-01-01

    Life cycle assessments of greenhouse gas emissions have been developed for analyzing products "from cradle to grave": from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production and to waste

  8. Life cycle assessment of greenhouse gas emissions

    NARCIS (Netherlands)

    Reijnders, L.; Chen, W.-Y.; Suzuki, T.; Lackner, M.

    2017-01-01

    Life cycle assessments of greenhouse gas emissions have been developed for analyzing products “from cradle to grave”: from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production, and waste

  9. Crop Production for Advanced Life Support Systems - Observations From the Kennedy Space Center Breadboard Project

    Science.gov (United States)

    Wheeler, R. M.; Sager, J. C.; Prince, R. P.; Knott, W. M.; Mackowiak, C. L.; Stutte, G. W.; Yorio, N. C.; Ruffe, L. M.; Peterson, B. V.; Goins, G. D.

    2003-01-01

    The use of plants for bioregenerative life support for space missions was first studied by the US Air Force in the 1950s and 1960s. Extensive testing was also conducted from the 1960s through the 1980s by Russian researchers located at the Institute of Biophysics in Krasnoyarsk, Siberia, and the Institute for Biomedical Problems in Moscow. NASA initiated bioregenerative research in the 1960s (e.g., Hydrogenomonas) but this research did not include testing with plants until about 1980, with the start of the Controlled Ecological Life Support System (CELSS) Program. The NASA CELSS research was carried out at universities, private corporations, and NASA field centers, including Kennedy Space Center (KSC). The project at KSC began in 1985 and was called the CELSS Breadboard Project to indicate the capability for plugging in and testing various life support technologies; this name has since been dropped but bioregenerative testing at KSC has continued to the present under the NASA s Advanced Life Support (ALS) Program. A primary objective of the KSC testing was to conduct pre-integration tests with plants (crops) in a large, atmospherically closed test chamber called the Biomass Production Chamber (BPC). Test protocols for the BPC were based on observations and growing procedures developed by university investigators, as well as procedures developed in plant growth chamber studies at KSC. Growth chamber studies to support BPC testing focused on plant responses to different carbon dioxide (CO2) concentrations, different spectral qualities from various electric lamps, and nutrient film hydroponic culture techniques.

  10. The return trip is felt shorter only postdictively: A psychophysiological study of the return trip effect [corrected].

    Directory of Open Access Journals (Sweden)

    Ryosuke Ozawa

    Full Text Available The return trip often seems shorter than the outward trip even when the distance and actual time are identical. To date, studies on the return trip effect have failed to confirm its existence in a situation that is ecologically valid in terms of environment and duration. In addition, physiological influences as part of fundamental timing mechanisms in daily activities have not been investigated in the time perception literature. The present study compared round-trip and non-round-trip conditions in an ecological situation. Time estimation in real time and postdictive estimation were used to clarify the situations where the return trip effect occurs. Autonomic nervous system activity was evaluated from the electrocardiogram using the Lorenz plot to demonstrate the relationship between time perception and physiological indices. The results suggest that the return trip effect is caused only postdictively. Electrocardiographic analysis revealed that the two experimental conditions induced different responses in the autonomic nervous system, particularly in sympathetic nervous function, and that parasympathetic function correlated with postdictive timing. To account for the main findings, the discrepancy between the two time estimates is discussed in the light of timing strategies, i.e., prospective and retrospective timing, which reflect different emphasis on attention and memory processes. Also each timing method, i.e., the verbal estimation, production or comparative judgment, has different characteristics such as the quantification of duration in time units or knowledge of the target duration, which may be responsible for the discrepancy. The relationship between postdictive time estimation and the parasympathetic nervous system is also discussed.

  11. Effects of dietary protease on nitrogen emissions from broiler production: a holistic comparison using Life Cycle Assessment.

    Science.gov (United States)

    Leinonen, Ilkka; Williams, Adrian G

    2015-12-01

    The aim of the study was to quantify the effects of the use of a protease Ronozyme® ProAct in broiler feed on the environmental impacts of broiler and broiler feed production chains. This was done by using a Life Cycle Assessment (LCA) modelling approach with data from trials using both standard soya-based broiler diets and reduced-protein diets with added protease. The results for the feed production chain showed that there was a reduction in all environmental impact categories when protease was used in the diets. The biggest reduction occurred in the category of Global Warming Potential, mainly as a result of decreased carbon dioxide emissions from land use changes related to soya production. In the results for the broiler production chain, there were relatively bigger reductions in Eutrophication Potential and especially in Acidification Potential, mainly as a result of reduced feed protein content and subsequent nitrogen emissions from housing and manure management. The use of protease in the broiler diets reduced the environmental impacts of both feed production and broiler production. The latter is mainly through reduced ammonia emissions, which has substantial benefit per se in the poultry industry. © 2015 Society of Chemical Industry.

  12. Shelf life of packaged bakery goods--a review.

    Science.gov (United States)

    Galić, K; Curić, D; Gabrić, D

    2009-05-01

    Packaging requirements for fresh bakery goods are often minimal as many of the products are for immediate consumption. However, packaging can be an important factor in extending the shelf life of other cereal-based goods (toast, frozen products, biscuits, cakes, pastas). Some amount of the texture changes and flavor loss manifest over the shelf life of a soft-baked good can usually be minimized or delayed by effective use of packaging materials. The gains in the extension of shelf life will be application specific. It is recognized that defining the shelf life of a food is a difficult task and is an area of intense research for food product development scientists (food technologists, microbiologists, packaging experts). Proper application of chemical kinetic principles to food quality loss allows for efficiently designing appropriate shelf-life tests and maximizing the useful information that can be obtained from the resulting data. In the development of any new food product including reformulating, change of packaging, or storage/distribution condition (to penetrate into a new market), one important aspect is the knowledge of shelf life.

  13. Risky family processes prospectively forecast shorter telomere length mediated through negative emotions.

    Science.gov (United States)

    Brody, Gene H; Yu, Tianyi; Shalev, Idan

    2017-05-01

    This study was designed to examine prospective associations of risky family environments with subsequent levels of negative emotions and peripheral blood mononuclear cell telomere length (TL), a marker of cellular aging. A second purpose was to determine whether negative emotions mediate the hypothesized link between risky family processes and diminished telomere length. Participants were 293 adolescents (age 17 years at the first assessment) and their primary caregivers. Caregivers provided data on risky family processes when the youths were age 17 years, youths reported their negative emotions at age 18 years, and youths' TL was assayed from a blood sample at age 22 years. The results revealed that (a) risky family processes forecast heightened negative emotions (β = .316, p emotions forecast shorter TL (β = -.187, p = .012), and (c) negative emotions served as a mediator connecting risky family processes with diminished TL (indirect effect = -0.012, 95% CI [-0.036, -0.002]). These findings are consistent with the hypothesis that risky family processes presage premature cellular aging through effects on negative emotions, with potential implications for lifelong health. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  14. Prioritization of Bioethanol Production Pathways in China based on Life Cycle Sustainability Assessment and Multi-Criteria Decision-Making

    DEFF Research Database (Denmark)

    Ren, Jingzheng; Manzardo, Alessandro; Mazzi, Anna

    2015-01-01

    Purpose The study objectives are two-fold: (i) combining the life cycle sustainability assessment (LCSA) framework and the multi-criteria decision-making (MCDM) methodology for sustainability assessment; (ii) determining the most sustainable scenario for bioethanol production in China according......’s proposed method investigates an illustrative case about three alternative bioethanol production scenarios (wheat-based, corn-based and cassava-based): the prior sequence (based on the sustainability performances) in descending order is cassava-based, corn-based and wheat-based. The proposed methodology...... is to test the combination of a MCDM methodology and LCSA for sustainability decision-making by studying three alternative pathways for bioethanol production in China. The proposed method feasibly enables the decision-makers/stakeholders to find the most sustainable scenario to achieve their objectives among...

  15. Emissions from photovoltaic life cycles.

    Science.gov (United States)

    Fthenakis, Vasilis M; Kim, Hyung Chul; Alsema, Erik

    2008-03-15

    Photovoltaic (PV) technologies have shown remarkable progress recently in terms of annual production capacity and life cycle environmental performances, which necessitate timely updates of environmental indicators. Based on PV production data of 2004-2006, this study presents the life-cycle greenhouse gas emissions, criteria pollutant emissions, and heavy metal emissions from four types of major commercial PV systems: multicrystalline silicon, monocrystalline silicon, ribbon silicon, and thin-film cadmium telluride. Life-cycle emissions were determined by employing average electricity mixtures in Europe and the United States during the materials and module production for each PV system. Among the current vintage of PV technologies, thin-film cadmium telluride (CdTe) PV emits the least amount of harmful air emissions as it requires the least amount of energy during the module production. However, the differences in the emissions between different PV technologies are very small in comparison to the emissions from conventional energy technologies that PV could displace. As a part of prospective analysis, the effect of PV breeder was investigated. Overall, all PV technologies generate far less life-cycle air emissions per GWh than conventional fossil-fuel-based electricity generation technologies. At least 89% of air emissions associated with electricity generation could be prevented if electricity from photovoltaics displaces electricity from the grid.

  16. On the management of life insurance company risk by strategic choice of product mix, investment strategy and surplus appropriation schemes

    DEFF Research Database (Denmark)

    Bohnert, Alexander; Gatzert, Nadine; Jørgensen, Peter Løchte

    2015-01-01

    The aim of this paper is to analyze the impact of management’s strategic choice of asset and liability composition in life insurance on shortfall risk and the shareholders’ fair risk charge. In contrast to previous work, we focus on the effectiveness of management decisions regarding the product...... mix and the riskiness of the asset side under different surplus appropriation schemes. We propose a model setting that comprises temporary life annuities and endowment insurance contracts. Our numerical results show that the effectiveness of management decisions in regard to risk reduction strongly...

  17. JNDC nuclear data library of fission products

    International Nuclear Information System (INIS)

    Tasaka, Kanji; Ihara, Hitoshi; Akiyama, Masatsugu; Yoshida, Tadashi; Matumoto, Zyun-itiro; Nakasima, Ryuzo

    1983-10-01

    The JNDC (Japanese Nuclear Data Committee) FP (Fission Product) nuclear data library for 1172 fission products is described in this report. The gross theory of beta decay has been used extensively for estimating unknown decay data and also some of known decay data with poor accuracy. The calculated decay powers of fission products using the present library show excellent agreement with the latest measurements at ORNL (Oak Ridge National Laboratory), LANL (Los Alamos National Laboratory) and UTT (University of Tokyo, Tokai) for cooling times shorter than 10 3 s after irradiation. The calculated decay powers by the existing libraries showed systematic deviations at short cooling times; the calculated beta and gamma decay powers after burst fission were smaller than the experimental results for cooling times shorter than 10 s, and in the cooling time range 10 to 10 3 s the beta-decay power was larger than the measured values and the gamma decay power smaller than the measured results. The present JNDC FP nuclear data library resolved these discrepancies in the short cooling time ranges. The decay power of fission products has been calculated for ten fission types and the results have been fitted by an analytical function with 31 exponentials. This permits the easy application of the present results of decay power calculations to a LOCA (Loss-of-Coolant Accident) analysis of a light water reactor and so on. (author)

  18. Improved Environmental Life Cycle Assessment of Crop Production at the Catchment Scale via a Process-Based Nitrogen Simulation Model.

    Science.gov (United States)

    Liao, Wenjie; van der Werf, Hayo M G; Salmon-Monviola, Jordy

    2015-09-15

    One of the major challenges in environmental life cycle assessment (LCA) of crop production is the nonlinearity between nitrogen (N) fertilizer inputs and on-site N emissions resulting from complex biogeochemical processes. A few studies have addressed this nonlinearity by combining process-based N simulation models with LCA, but none accounted for nitrate (NO3(-)) flows across fields. In this study, we present a new method, TNT2-LCA, that couples the topography-based simulation of nitrogen transfer and transformation (TNT2) model with LCA, and compare the new method with a current LCA method based on a French life cycle inventory database. Application of the two methods to a case study of crop production in a catchment in France showed that, compared to the current method, TNT2-LCA allows delineation of more appropriate temporal limits when developing data for on-site N emissions associated with specific crops in this catchment. It also improves estimates of NO3(-) emissions by better consideration of agricultural practices, soil-climatic conditions, and spatial interactions of NO3(-) flows across fields, and by providing predicted crop yield. The new method presented in this study provides improved LCA of crop production at the catchment scale.

  19. Defining Product Intake Fraction to Quantify and Compare Exposure to Consumer Products.

    Science.gov (United States)

    Jolliet, Olivier; Ernstoff, Alexi S; Csiszar, Susan A; Fantke, Peter

    2015-08-04

    There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example applications of the product intake fraction concept, for two chemicals in two personal care products and two chemicals encapsulated in two articles, showing how intakes of these chemicals can primarily occur during product use. We demonstrate the utility of the product intake fraction and its application modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products, or back-calculate maximum allowable concentrations of substances inside products.

  20. Genetic manipulation of longevity-related genes as a tool to regulate yeast life span and metabolite production during winemaking

    Directory of Open Access Journals (Sweden)

    Orozco Helena

    2013-01-01

    Full Text Available Abstract Background Yeast viability and vitality are essential for different industrial processes where the yeast Saccharomyces cerevisiae is used as a biotechnological tool. Therefore, the decline of yeast biological functions during aging may compromise their successful biotechnological use. Life span is controlled by a variety of molecular mechanisms, many of which are connected to stress tolerance and genomic stability, although the metabolic status of a cell has proven a main factor affecting its longevity. Acetic acid and ethanol accumulation shorten chronological life span (CLS, while glycerol extends it. Results Different age-related gene classes have been modified by deletion or overexpression to test their role in longevity and metabolism. Overexpression of histone deacetylase SIR2 extends CLS and reduces acetate production, while overexpression of SIR2 homolog HST3 shortens CLS, increases the ethanol level, and reduces acetic acid production. HST3 overexpression also enhances ethanol tolerance. Increasing tolerance to oxidative stress by superoxide dismutase SOD2 overexpression has only a moderate positive effect on CLS. CLS during grape juice fermentation has also been studied for mutants on several mRNA binding proteins that are regulators of gene expression at the posttranscriptional level; we found that NGR1 and UTH4 deletions decrease CLS, while PUF3 and PUB1 deletions increase it. Besides, the pub1Δ mutation increases glycerol production and blocks stress granule formation during grape juice fermentation. Surprisingly, factors relating to apoptosis, such as caspase Yca1 or apoptosis-inducing factor Aif1, play a positive role in yeast longevity during winemaking as their deletions shorten CLS. Conclusions Manipulation of regulators of gene expression at both transcriptional (i.e., sirtuins and posttranscriptional (i.e., mRNA binding protein Pub1 levels allows to modulate yeast life span during its biotechnological use. Due to