Gelation induced supramolecular chirality: chirality transfer, amplification and application.

Science.gov (United States)

Duan, Pengfei; Cao, Hai; Zhang, Li; Liu, Minghua

2014-08-14

Supramolecular chirality defines chirality at the supramolecular level, and is generated from the spatial arrangement of component molecules assembling through non-covalent interactions such as hydrogen bonding, van der Waals interactions, π-π stacking, hydrophobic interactions and so on. During the formation of low molecular weight gels (LMWGs), one kind of fascinating soft material, one frequently encounters the phenomenon of chirality as well as chiral nanostructures, either from chiral gelators or even achiral gelators. A view of gelation-induced supramolecular chirality will be very helpful to understand the self-assembly process of the gelator molecules as well as the chiral structures, the regulation of the chirality in the gels and the development of the "smart" chiral materials such as chiroptical devices, catalysts and chiral sensors. It necessitates fundamental understanding of chirality transfer and amplification in these supramolecular systems. In this review, recent progress in gelation-induced supramolecular chirality is discussed.

The influence of Uranium-Thorium ratio and heating time during gelation using as a CCl4(NH3) on the Gel quality

International Nuclear Information System (INIS)

Indra-Suryawan; Sukarsono, R; Setyo-Sulardi

1996-01-01

Gel has been prepared from a uranium-thorium sol using CCI 4 (NH 3 ) as a gelling medium. The uranium-thorium ratio and the heating time during gelation have been chosen as variables. The sol was prepared by mixing Th(NO 3 ) 4 and UO 2 (NO 3 ) 2 solutions, heating the solution at 95 o C and adding NH 4 OH solution drop by drop until colloidal particles were formed. Sol was then fed into a gelation column containing CCI 4 (NH 3 ), where the sol was transformed into gel. A good gel has properties such as sphere in shape and elastic which it will not crack when it is dropped from 2 metres height. The experimental work resulted a good gel when the percentage of uranium was about 15 - 25 % at heating time of 40 - 50 minutes

The risk of shorter fasting time for pediatric deep sedation.

Science.gov (United States)

Clark, Mathew; Birisci, Esma; Anderson, Jordan E; Anliker, Christina M; Bryant, Micheal A; Downs, Craig; Dalabih, Abdallah

2016-01-01

Current guidelines adopted by the American Academy of Pediatrics calls for prolonged fasting times before performing pediatric procedural sedation and analgesia (PSA). PSA is increasingly provided to children outside of the operating theater by sedation trained pediatric providers and does not require airway manipulation. We investigated the safety of a shorter fasting time compared to a longer and guideline compliant fasting time. We tried to identify the association between fasting time and sedation-related complications. This is a prospective observational study that included children 2 months to 18 years of age and had an American Society of Anesthesiologists physical status classification of I or II, who underwent deep sedation for elective procedures, performed by pediatric critical care providers. Procedures included radiologic imaging studies, electroencephalograms, auditory brainstem response, echocardiograms, Botox injections, and other minor surgical procedures. Subjects were divided into two groups depending on the length of their fasting time (4-6 h and >6 h). Complication rates were calculated and compared between the three groups. In the studied group of 2487 subjects, 1007 (40.5%) had fasting time of 4-6 h and the remaining 1480 (59.5%) subjects had fasted for >6 h. There were no statistically significant differences in any of the studied complications between the two groups. This study found no difference in complication rate in regard to the fasting time among our subjects cohort, which included only healthy children receiving elective procedures performed by sedation trained pediatric critical care providers. This suggests that using shorter fasting time may be safe for procedures performed outside of the operating theater that does not involve high-risk patients or airway manipulation.

Influence of pre-cooking protein paste gelation conditions and post-cooking gel storage conditions on gel texture.

Science.gov (United States)

Paker, Ilgin; Matak, Kristen E

2016-01-15

Gelation conditions affect the setting of myofibrillar fish protein gels. Therefore the impact of widely applied pre-cooking gelation time/temperature strategies and post-cooking period on the texture and color of final protein gels was determined. Four pre-cooking gelation strategies (no setting time, 30 min at 25 °C, 1 h at 40 °C or 24 h at 4 °C) were applied to protein pastes (fish protein concentrate and standard functional additives). After cooking, texture and color were analyzed either directly or after 24 h at 4 °C on gels adjusted to 25 °C. No-set gels were harder, gummier and chewier (P cooking. Gel-setting conditions had a greater (P cooking stored gels in texture and color, depending on the pre-cooking gelation strategy. Pre-cooking gelation conditions will affect final protein gel texture and color, with gel stability benefiting from a gel-setting period. However, post-cooking storage may have a greater impact on final gels, with textural attributes becoming more consistent between all samples. © 2015 Society of Chemical Industry.

Towards a fragment-based approach in gelator design: halogen effects leading to thixotropic, mouldable and self-healing systems in aryl-triazolyl amino acid-based gelators!

Science.gov (United States)

Srivastava, Bhartendu K; Manheri, Muraleedharan K

2017-04-18

A simple replacement of a H atom by Br transformed non-gelating aryl triazolyl amino acid benzyl ester into a versatile gelator, which formed shape-persistent, self-healing and mouldable gels. The 'bromo-aryl benzyl ester' fragment was then transplanted into another framework, which resulted in similar solvent preference and gelation efficiency.

Photoinduced gelation by stilbene oxalyl amide compounds.

Science.gov (United States)

Miljanić, Snezana; Frkanec, Leo; Meić, Zlatko; Zinić, Mladen

2005-03-29

Oxalyl amide derivatives bearing 4-dodecyloxy-stilbene as a cis-trans photoisomerizing unit were synthesized. The trans derivative acted as a versatile gelator of various organic solvents, whereas the corresponding cis derivative showed a poor gelation ability or none at all. In diluted solution (c = 2.0 x10(-5) mol dm(-3), ethanol), the cis isomer was photochemically converted into the trans isomer within 4 min. Depending on the radiation wavelength, the trans isomer was stable or liable to photodecomposition. When exposed to irradiation, a concentrated solution of the cis isomer (c = 2.0 x 10(-2) mol dm(-3), ethanol) turned into a gel. The FT-Raman, FT-IR, and 1H NMR spectra demonstrated that the gelation process occurred because of a rapid cis --> trans photoisomerization followed by a self-assembly of the trans molecules. Apart from the formation of hydrogen bonding between the oxalyl amide parts of the molecules, confirmed by FT-IR spectroscopy, it was assumed that the pi-pi stacking between the trans-stilbene units of the molecule and a lipophilic interaction between long alkyl chains were the interactions responsible for gelation.

Physical activity during video capsule endoscopy correlates with shorter bowel transit time.

Science.gov (United States)

Stanich, Peter P; Peck, Joshua; Murphy, Christopher; Porter, Kyle M; Meyer, Marty M

2017-09-01

 Video capsule endoscopy (VCE) is limited by reliance on bowel motility for propulsion, and lack of physical activity has been proposed as a cause of incomplete studies. Our aim was to prospectively investigate the association between physical activity and VCE bowel transit.  Ambulatory outpatients receiving VCE were eligible for the study. A pedometer was attached at the time of VCE ingestion and step count was recorded at the end of the procedure. VCE completion was assessed by logistic regression models, which included step count (500 steps as one unit). Total transit time was analyzed by Cox proportional hazards models. The hazard ratios (HR) with 95 % confidence interval (CI) indicated the "hazard" of completion, such that HRs > 1 indicated a reduced transit time.  A total of 100 patients were included. VCE was completed in 93 patients (93 %). The median step count was 2782 steps. Step count was not significantly associated with VCE completion (odds ratio 1.45, 95 %CI 0.84, 2.49). Pedometer step count was significantly associated with shorter total, gastric, and small-bowel transit times (HR 1.09, 95 %CI 1.03, 1.16; HR 1.05, 95 %CI 1.00, 1.11; HR 1.07, 95 %CI 1.01, 1.14, respectively). Higher body mass index (BMI) was significantly associated with VCE completion (HR 1.87, 95 %CI 1.18, 2.97) and shorter bowel transit times (HR 1.05, 95 %CI 1.02, 1.08).  Increased physical activity during outpatient VCE was associated with shorter bowel transit times but not with study completion. In addition, BMI was a previously unreported clinical characteristic associated with VCE completion and should be included as a variable of interest in future studies.

Determination of Ideal Broth Formulations Needed to Prepare Hydrous Cerium Oxide Microspheres via the Internal Gelation Process

Energy Technology Data Exchange (ETDEWEB)

Collins, Jack Lee [ORNL; Chi, Anthony [ORNL

2009-02-01

A simple test tube methodology was used to determine optimum process parameters for preparing hydrous cerium oxide microspheres via the internal gelation process.1 Broth formulations of cerium ammonium nitrate [(NH4)2Ce(NO3)6], hexamethylenetetramine, and urea were found that can be used to prepare hydrous cerium oxide gel spheres in the temperature range of 60 to 90 C. A few gel-forming runs were made in which microspheres were prepared with some of these formulations to be able to equate the test-tube gelation times to actual gelation times. These preparations confirmed that the test-tube methodology is reliable for determining the ideal broth formulations.

Performance test of a vertically-directed electric-field cavity resonator made for the rapid gelation apparatus with microwave heating

International Nuclear Information System (INIS)

Yamagishi, Shigeru; Ogawa, Toru; Hasegawa, Atsushi.

1996-06-01

A cavity resonator with vertically-directed electric field was produced and attached to 'the rapid gelation apparatus with microwave heating' previously reported. Using the rapid gelation apparatus, drops of a simulated solution and of U-containing solutions for internal gelation were heated. The results indicated that the heating required for gelation of the U-containing solutions was possible. However, the electric field strength in the cavity resonator at that time was comparable to that causing the discharge due to the gaseous ammonia released from the heated drops. As a result, gel microspheres were not obtained in a stable state. The discussion suggests that the stable gelation would be realized by improving the cavity resonator shape and/or by modifying the power supply accompanied with using a power stabilizer. (author)

Permanganate gel (PG) for groundwater remediation: compatibility, gelation, and release characteristics.

Science.gov (United States)

Lee, Eung Seok; Olson, Pamela R; Gupta, Neha; Solpuker, Utku; Schwartz, Franklin W; Kim, Yongje

2014-02-01

Permanganate (MnO4(-)) is a strong oxidant that is widely used for treating chlorinated ethylenes in groundwater. This study aims to develop hyper-saline MnO4(-) solution (MnO4(-) gel; PG) that can be injected into aquifers via wells, slowly gelates over time, and slowly release MnO4(-) to flowing water. In this study, compatibility and miscibility of gels, such as chitosan, aluminosilicate, silicate, and colloidal silica gels, with MnO4(-) were tested. Of these gels, chitosan was reactive with MnO4(-). Aluminosilicates were compatible but not readily miscible with MnO4(-). Silicates and colloidal silica were both compatible and miscible with MnO4(-), and gelated with addition of KMnO4 granules. Colloidal silica has low initial viscosity (<15cP), exhibited delayed gelation characteristics with the lag times ranging from 0 to 200min. Release of MnO4(-) from the colloidal silica-based PG gel occurred in a delayed fashion, with maximum duration of 24h. These results suggested that colloidal silica can be used to create PG or delayed-gelling forms containing other oxidants which can be used for groundwater remediation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Factors influencing chymosin-induced gelation of milk from individual dairy cows

DEFF Research Database (Denmark)

Gustavsson, F.; Glantz, M; Buitenhuis, Albert Johannes

2014-01-01

the variation of gelation properties in this sample set. Non-coagulating milk was suggested to have lower ionic and total calcium content as well as lower relative concentrations of β-lactoglobulin than coagulating milk. The lower total calcium content in non-coagulating milk poses a problem as the difference...... calcium content, phosphorous content and casein micelle size on chymosin-induced gelation was determined in milk from 98 Swedish Red cows. The study showed that protein content and total calcium content, ionic calcium concentration and casein micelle size were the most important factors explaining...... was, theoretically, four times larger than the amount of calcium that is normally added in cheese processing...

Factors influencing the gelation and rennetability of camel milk using camel chymosin

DEFF Research Database (Denmark)

Hailu, Yonas; Hansen, Egon Bech; Seifu, Eyassu

2016-01-01

The effects of temperature, pH, concentration of camel chymosin and addition of CaCl2 on the hydrolysis of κ-casein (κ-CN) and the coagulation kinetics of camel milk were investigated. The rate of κ-CN hydrolysis was higher at 40 °C than at 30 °C and with increasing addition of chymosin...... and decreasing pH. For all samples gelation was initiated at levels of camel milk κ-CN hydrolysis >95%. The gelation time (Tg) of camel milk was significantly reduced (from 717 to 526 s) at 30 °C when the concentration of chymosin was increased, but was independent of chymosin concentration at 40 °C. Reducing p......H also reduced Tg. The gel firmness increased at 40 °C (58 Pa) compared with 30 °C (44 Pa) and effect of CaCl2 addition on the gelation properties of camel milk was found to be dependent on pH; a significant improvement was only found at pH 6.3....

Comparison of the sickling and gelation properties of acidic ...

African Journals Online (AJOL)

The effects of acidic metabolites of A. vera and C. cajan extracts on the sickling and gelation times of human HbSS erythrocytes were investigated to obtain a better understanding of the anti-sickling compounds contained in them for use in the management of sickle cell disease. The results obtained showed that the acidic ...

Ultrasound- and Temperature-Induced Gelation of Gluconosemicarbazide Gelator in DMSO and Water Mixtures

Directory of Open Access Journals (Sweden)

Mothukunta Himabindu

2017-04-01

Full Text Available We have developed amphiphilic supramolecular gelators carrying glucose moiety that could gel a mixture of dimethyl sulfoxide (DMSO and water upon heating as well as ultrasound treatment. When the suspension of gluconosemicarbazide was subjected to ultrasound treatment, gelation took place at much lower concentrations compared to thermal treatment, and the gels transformed into a solution state at higher temperatures compared to temperature-induced gels. The morphology was found to be influenced by the nature of the stimulus and presence of salts such as KCl, NaCl, CaCl2 and surfactant (sodium dodecyl sulphate at a concentration of 0.05 M. The gel exhibited impressive tolerance to these additives, revealing the stability and strength of the gels. Fourier transform infrared spectroscopy (FTIR revealed the presence of the intermolecular hydrogen bonding interactions while differential scanning calorimetry (DSC and rheological studies supported better mechanical strength of ultrasound-induced (UI gels over thermally-induced (TI gels.

Silica-gel structural characterization during the initial phases of gelation and drying

International Nuclear Information System (INIS)

Ferreira, Max Passos

1996-01-01

For centuries, glasses and ceramics have been made via melting or solid state reactions at temperatures above 100 deg C. The sol-gel process offers new approaches to the synthesis of glasses and ceramics, combining control of composition and structure at the molecular level with the ability to shape materials in bulk, powder, fiber and thin-film forms. The growth of sol-gel technology research is due to the many unique features of that class of materials. Major applications include optical elements and integrated optical devices, ceramic filters, membranes, supercondutors, magnetic, catalytic and manostructured materials to antioxidant, anticorrosion coatings and composite and biomedical materials. In this work a variety of techniques like spectroscopy, Raman spectroscopy, ultraviolet-visible spectroscopy, light scattering nuclear magnetic resonance, X ray diffraction and nitrogen adsorption have been employed to investigate the initial phase of the sol-gel transition of gamma ray irradiated tetramethoxysilane (TMOS) solutions and non-irradiated TMOS solution and to get information about the structure of the silica gels obtained under different gelation conditions. Typically the tetramethoxysilane solutions were prepared using a molar ratio of TMOS to demineralized water of 1 to 16. Some experiments were made under catalysed conditions. The mixing was carried out at room temperature. The turbidity and light scattering experiments on the polycondensation of tetramethoxysilane show that exists no drastic difference in the gelling time of a gamma ray irradiated and a non-irradiated TMOS+H 2 O (1+16 M) solution. In the absence of a catalyst, the gelling time for both reactions occurs in about 3.30 h. When HNO 3 (o.03 M) was used, the gelling time observed was 3 days. Raman and ultraviolet-visible spectroscopy show no drastic difference during the initial phase at the sol-gel transition under ambient temperature/pressure and under gamma radiation. The gels heated

Production of cerium dioxide microspheres by an internal gelation sol–gel method

Energy Technology Data Exchange (ETDEWEB)

Katalenich, Jeffrey A.

2017-03-27

An internal gelation sol-gel technique was used to prepare cerium dioxide microspheres with uniform diameters near 100 µm. In this process, chilled aqueous solutions containing cerium, hexamethylenetetramine (HMTA), and urea are transformed into a solid gel by heat addition and are subsequently washed, dried, and sintered to produce pure cerium dioxide. Cerous nitrate and ceric ammonium nitrate solutions were compared for their usefulness in microsphere production. Gelation experiments were performed with both cerous nitrate and ceric ammonium nitrate to determine desirable concentrations of cerium, HMTA, and urea in feed solutions as well as the necessary quantity of ammonium hydroxide added to cerium solutions. Analysis of the pH before and after sample gelation was found to provide a quantitative metric for optimal parameter selection along with subjective evaluations of gel qualities. The time necessary for chilled solutions to gel upon inserting into a hot water bath was determined for samples with a variety of parameters and also used to determine desirable formulations for microsphere production. A technique for choosing the optimal mixture of ceric ammonium nitrate, HMTA, and urea was determined using gelation experiments and used to produce microspheres by dispersion of the feed solution into heated silicone oil. Gelled spheres were washed to remove excess reactants and reaction products before being dried and sintered. X-ray diffraction of air-dried microspheres, sintered microspheres, and commercial CeO₂ powders indicated that air-dried and sintered spheres were pure CeO₂.

Evaluation of polyacrylamide gels with accelerator ammonium salts for water shutoff in ultralow temperature reservoirs: Gelation performance and application recommendations

Directory of Open Access Journals (Sweden)

Hu Jia

2016-03-01

Full Text Available Water shutoff in ultralow temperature reservoirs has received great attention in recent years. In previous study, we reported a phenol-formaldehyde-based gel formula with ammonium salt which can provide a gelation time between 2 hrs and 2 days at 25 °C. However, systematic evaluation and field recommendations of this gel formula when encountering complex reservoirs environment are not addressed. In this paper, how and why such practical considerations as water composition, temperature, pH, weight ratio of formaldehyde to resorcinol and contaminant Fe3+ to affect the gelation performance are examined. Brookfield DV-III and scanning electron microscopy (SEM are employed respectively for viscosity measurement and microstructure analysis. SEM results further illustrate the mechanism of the effect of salinity on gelation performance. It reveals that crosslinking done by covalent bond has great advantage for gel stability under high salinity environment. The target gel formula can provide desirable gelation time below 60 °C, perfect for 15–45 °C, while it is unfeasible to use high salinity to delay gelation at 60 °C. We summarized the effect of salinity on gelation performance of different gel formulas from the present study and published literature. The summarized data can provide important guideline for gel formula design before conducting any kinds of experiments. The variation of gelation performance at different salinity may be dominated by the interaction between crosslinker-salt-polymer, not only limited to “charge-screening effect” and “ion association” proposed by several authors. We hope the analysis encouraging further investigations. Some recommendations for field application of this gel are given in the end of this paper.

The Change of the Family Life Affected by the Shorter Working Time : From the Point of View of the Home Management

OpenAIRE

平田, 道憲

1994-01-01

In Japan, the working time has been decreasing. However, Japanese working people spend more hours per year to work than those in Western countries. The policy of the shorter working time is conducted by the Japanese Government in order that the working people get more free time. This paper examines whether the shorter working time of working members in the family enrich the time use of the other members of the family. Especially, the effect of the shorter working time of husbands to wives...

Internal gelation at PSI. The past and the future

International Nuclear Information System (INIS)

Pouchon, Manuel A.; Ingold, Franz

2009-01-01

The Paul Scherrer Institute used to be very active in fuel fabrication R and D using the internal gelation process, which is a promising production method for spherical nuclear fuel. Such fuel kernels can be directly packed in a cylindrical cladding (a sphere-pac pin), or they can be coated in the TRISO concept. The internal gelation offers several advantages, as it is aqueous up to the forming of the sphere. Consequently, the process is almost dustless, with lower risk of incorporation. The production does not require mechanical and maintenance intensive equipment, as for example presses and grinding machines necessary for pellet type fuel. Especially for low decontaminated fuel coming from aqueous reprocessing, this offers a great advantage, because the production line can easily be handled remotely in a hot cell. In the past, many different fuel matrices were produced and tested at PSI (carbide, nitride and oxide fuels). The paper summarizes the past activities, and some important findings. Furthermore, future perspectives of this concept are shown. These are especially seen in context of Generation IV nuclear systems such as the sodium cooled fast reactor (SFR), the very high temperature reactor (VHTR), and the gas cooled fast reactor (GFR). The paper describes the former production line, which was a classical internal gelation process. Some advantages and disadvantages of this system will be illustrated which lead to a new project at PSI. A silicon oil-free system will be developed over the next years. The oil as a heat carrier is replaced by a cavity, where microwaves act on falling drops and lead to the desired gelation before the spheres drop into a washing solution. The idea of a microwave gelation has already been tested at several laboratories in the past. The paper gives an overview of these activities. Finally the concept of the new production at PSI is introduced. (author)

Universal sol state behavior and gelation kinetics in mixed clay dispersions.

Science.gov (United States)

Pujala, Ravi Kumar; Pawar, Nisha; Bohidar, H B

2011-05-03

Sol and gel state behavior, in aqueous salt free dispersions, of clays Laponite (L) and Na montmorillonite (MMT) was studied at various mixing ratios (L:MMT = r = 1:0.5, 1:1, and 1:2). In the sol state, the zeta potential and gelation concentration of L-MMT obeyed the universal relation, X(L-MMT) = (rX(L) + X(MMT))/(1 + r), where X is zeta potential or gelation concentration (c(g)), implying that these properties are linear combinations of the same of their individual components. The low frequency storage modulus (G(0)'), relative viscosity (η(r)), and apparent cluster size (R) could be universally described by the power-law, G(0)' ∼ ((c/c(g)) - 1)(t) (c > c(g)), and η(r), R ∼ (1 - (c/c(g)))(-k,ν) (c < c(g)), with t = 1.5, k = 1.1, and υ = 0.8 close to the gelation concentration, for r = 1:1 cogel, consistent with the percolation model description of gelation. Interestingly, the hyperscaling relation δ = t/(k + t) yielded δ = 0.56 not too different from the predicted value ∼0.7, while the experimental value of δ obtained from G''(ω) ∼ ω(δ) close to c ≈ c(g) yielded δ = 1.5, which was at variance with the hyperscaling result. The experimental data, on hand, mostly supported percolation type gelation mechanism. As the cogels were slowly heated, at a characteristic temperature, T(g), a sharp increase in G' value was noticed, implying a transition to gel hardening (a new phase state). The temperature-dependent behavior followed the power-law description, G' ∼ (T(g) - T)(-γ) (T < T(g)), with γ = 0.40 ± 0.05 invariant of composition of the cogel, whereas for MMT and Laponite, γ = 0.25 and 0.55, respectively. It has been shown that the cogel has significantly enhanced mechanical (G(0) increased by 10 times for r = 1:1 cogel) and thermal properties (T(g) increased by 13 °C for 1:1 cogel) that can be exploited to design customized soft materials.

Heat stability and acid gelation properties of calcium-enriched reconstituted skim milk affected by ultrasonication.

Science.gov (United States)

Chandrapala, Jayani; Bui, Don; Kentish, Sandra; Ashokkumar, Muthupandian

2014-05-01

The aggregation of proteins after heating of calcium-fortified milks has been an ongoing problem in the dairy industry. This undesirable effect restricts the manufacture of calcium rich dairy products. To overcome this problem, a completely new approach in controlling the heat stability of dairy protein solutions, developed in our lab, has been employed. In this approach, high intensity, low frequency ultrasound is applied for a very short duration after a pre-heating step at ⩾70 °C. The ultrasound breaks apart whey/whey and whey/casein aggregates through the process of acoustic cavitation. Protein aggregates do not reform on subsequent post-heating, thereby making the systems heat stable. In this paper, the acid gelation properties of ultrasonicated calcium-enriched skim milks have also been investigated. It is shown that ultrasonication alone does not change the gelation properties significantly whereas a sequence of preheating (72 °C/1 min) followed by ultrasonication leads to decreased gelation times, decreased gel syneresis and increased skim milk viscosity in comparison to heating alone. Overall, ultrasonication has the potential to provide calcium-fortified dairy products with increased heat stability. However, enhanced gelation properties can only be achieved when ultrasonication is completed in conjunction with heating.

Photothermal characterization of the gelation process in Gelidium robustum Agar

Science.gov (United States)

Freile-Pelegrín, Y.; Bante, J.; Alvarado-Gil, J. J.; Yánez-Limón, J. M.

2005-06-01

Agar is a hydrophilic colloid formed by polysaccharides, whose ability to form reversible gels simply by cooling hot aqueous solutions is the most important property and can be regarded as the prototype and model for all gelling systems. In this paper the evolution of the gelation process of agar obtained from algae of the species Gelidium robustum, using the photopyroelectric technique is reported. It is shown that thermal effusivity increase when the agar is cooled, reaching a maximum value around 37°C. The increase in thermal effusivity can be related to the increasing of the bondings in the gel as temperature decreases, reaching the maximum at the gelation point. The decrease of the thermal effusivity at lower temperature could be due to the syneresis process involving a gradual release of water after gelation.

Reversible thermal gelation in soft spheres

DEFF Research Database (Denmark)

Kapnistos, M.; Vlassopoulos, D.; Fytas, G.

2000-01-01

Upon heating, concentrated solutions of star polymers and block copolymer micelles in a good solvent, representing soft spheres, undergo a reversible gelation. This phenomenon is attributed to the formation of clusters causing a partial dynamic arrest of the swollen interpenetrating spheres at hi...

Gelation And Mechanical Response of Patchy Rods

Science.gov (United States)

Kazem, Navid; Majidi, Carmel; Maloney, Craig

We perform Brownian Dynamics simulations to study the gelation of suspensions of attractive, rod-like particles. We show that details of the particle-particle interactions can dramatically affect the dynamics of gelation and the structure and mechanics of the networks that form. If the attraction between the rods is perfectly smooth along their length, they will collapse into compact bundles. If the attraction is sufficiently corrugated or patchy, over time, a rigid space spanning network forms. We study the structure and mechanical properties of the networks that form as a function of the fraction of the surface that is allowed to bind. Surprisingly, the structural and mechanical properties are non-monotonic in the surface coverage. At low coverage, there are not a sufficient number of cross-linking sites to form networks. At high coverage, rods bundle and form disconnected clusters. At intermediate coverage, robust networks form. The elastic modulus and yield stress are both non-monotonic in the surface coverage. The stiffest and strongest networks show an essentially homogeneous deformation under strain with rods re-orienting along the extensional axis. Weaker, clumpy networks at high surface coverage exhibit relatively little re-orienting with strong non-affine deformation. These results suggest design strategies for tailoring surface interactions between rods to yield rigid networks with optimal properties. National Science Foundation and the Air Force Office of Scientific Research.

KINETICS OF A SILICATE COMPOSITION GELATION IN PRESENCE OF REACTION RATE REGULATING COMPOUNDS

Directory of Open Access Journals (Sweden)

Olga Titova

2013-12-01

Full Text Available The influence of organic and inorganic additions on the formation rate of the silicate gels standard systems – sodium silicate solution in model fresh water was studied. As a result of the experiments were selected optimum concentrations of additives - gelation time regulators

Preparation of curcumin nanoparticle by using reinforcement ionic gelation technique

Science.gov (United States)

Suryani, Halid, Nur Hatidjah Awaliyah; Akib, Nur Illiyyin; Rahmanpiu, Mutmainnah, Nina

2017-05-01

Curcumin, a polyphenolic compound present in curcuma longa has a wide range of activities including anti-inflammatory properties. The potency of curcumin is limited by its poor oral bioavailability because of its poor solubility in aqueous. Various methods have been tried to solve the problem including its encapsulation into nanoparticle. The aim of this study is to develop curcumin nanoparticle by using reinforcement ionic gelation technique and to evaluate the stability of curcumin nanoparticles in gastrointestinal fluid. Curcumin nanoparticles were prepared by using reinforcement ionic gelation technique with different concentrations of chitosan, trypolyphosphate, natrium alginate and calcium chloride. Curcumin nanoparticles were then characterized including particle size and zeta potential by using particle size analyzer and morphology using a transmission electron microscope, entrapment efficiency using UV-Vis Spectrophotometer and chemical structure analysis by Infra Red Spectrophotometer (FTIR). Furthermore, the stability of curcumin nanoparticles were evaluated on artificial gastric fluid and artificial intestinal fluids by measuring the amount of curcumin released in the medium at a time interval. The result revealed that curcumin nanoparticles can be prepared by reinforcement ionic gelation technique, the entrapment efficiency of curcumin nanoparticles were from 86.08 to 91.41%. The average of particle size was 272.9 nm and zeta potential was 12.05 mV. The morphology examination showed that the curcumin nanoparticles have spherical shape. The stability evaluation of curcumin nanoparticles showed that the nanoparticles were stable on artificial gastric fluid and artificial intestinal fluid. This result indicates that curcumin nanoparticles have the potential to be developed for oral delivery.

Gelation or molecular recognition; is the bis-(α,β-dihydroxy esters motif an omnigelator?

Directory of Open Access Journals (Sweden)

Peter C. Griffiths

2010-11-01

Full Text Available Understanding the gelation of liquids by low molecular weight solutes at low concentrations gives an insight into many molecular recognition phenomena and also offers a simple route to modifying the physical properties of the liquid. Bis-(α,β-dihydroxy esters are shown here to gel thermoreversibly a wide range of solvents, raising interesting questions as to the mechanism of gelation. At gelator concentrations of 5–50 mg ml−1, gels were successfully formed in acetone, ethanol/water mixtures, toluene, cyclohexane and chloroform (the latter, albeit at a higher gelator concentration. A range of neutron techniques – in particular small-angle neutron scattering (SANS – have been employed to probe the structure of a selection of these gels. The universality of gelation in a range of solvent types suggests the gelation mechanism is a feature of the bis-(α,β-dihydroxy ester motif, with SANS demonstrating the presence of regular structures in the 30–40 Å range. A correlation between the apparent rodlike character of the structures formed and the polarity of the solvent is evident. Preliminary spin-echo neutron scattering studies (SESANS indicated the absence of any larger scale structures. Inelastic neutron spectroscopy (INS studies demonstrated that the solvent is largely unaffected by gelation, but does reveal insights into the thermal history of the samples. Further neutron studies of this kind (particularly SESANS and INS are warranted, and it is hoped that this work will stimulate others to pursue this line of research.

Structural and solubility parameter correlations of gelation abilities for dihydroxylated derivatives of long-chain, naturally occurring fatty acids.

Science.gov (United States)

Zhang, Mohan; Selvakumar, Sermadurai; Zhang, Xinran; Sibi, Mukund P; Weiss, Richard G

2015-06-01

Creating structure-property correlations at different distance scales is one of the important challenges to the rational design of molecular gelators. Here, a series of dihydroxylated derivatives of long-chain fatty acids, derived from three naturally occurring molecules-oleic, erucic and ricinoleic acids-are investigated as gelators of a wide variety of liquids. Conclusions about what constitutes a more (or less!) efficient gelator are based upon analyses of a variety of thermal, structural, molecular modeling, and rheological results. Correlations between the manner of molecular packing in the neat solid or gel states of the gelators and Hansen solubility data from the liquids leads to the conclusion that diol stereochemistry, the number of carbon atoms separating the two hydroxyl groups, and the length of the alkanoic chains are the most important structural parameters controlling efficiency of gel formation for these gelators. Some of the diol gelators are as efficient or even more efficient than the well-known, excellent gelator, (R)-12-hydroxystearic acid; others are much worse. The ability to form extensive intermolecular H-bonding networks along the alkyl chains appears to play a key role in promoting fiber growth and, thus, gelation. In toto, the results demonstrate how the efficiency of gelation can be modulated by very small structural changes and also suggest how other structural modifications may be exploited to create efficient gelators. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synergistic enhancement in the co-gelation of salt-soluble pea proteins and whey proteins.

Science.gov (United States)

Wong, Douglas; Vasanthan, Thava; Ozimek, Lech

2013-12-15

This paper investigated the enhancement of thermal gelation properties when salt-soluble pea proteins were co-gelated with whey proteins in NaCl solutions, using different blend ratios, total protein concentrations, pH, and salt concentrations. Results showed that the thermal co-gelation of pea/whey proteins blended in ratio of 2:8 in NaCl solutions showed synergistic enhancement in storage modulus, gel hardness, paste viscosity and minimum gelation concentrations. The highest synergistic enhancement was observed at pH 6.0 as compared with pH 4.0 and 8.0, and at the lower total protein concentration of 10% as compared with 16% and 22% (w/v), as well as in lower NaCl concentrations of 0.5% and 1.0% as compared with 1.5%, 2.0%, 2.5%, and 3.0% (w/v). The least gelation concentrations were also lower in the different pea/whey protein blend ratios than in pure pea or whey proteins, when dissolved in 1.0% or 2.5% (w/v) NaCl aqueous solutions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Organic Gelators as Growth Control Agents for Stable and Reproducible Hybrid Perovskite-Based Solar Cells

KAUST Repository

Masi, Sofia

2017-03-03

Low-molecular-weight organic gelators are widely used to influence the solidification of polymers, with applications ranging from packaging items, food containers to organic electronic devices, including organic photovoltaics. Here, this concept is extended to hybrid halide perovskite-based materials. In situ time-resolved grazing incidence wide-angle X-ray scattering measurements performed during spin coating reveal that organic gelators beneficially influence the nucleation and growth of the perovskite precursor phase. This can be exploited for the fabrication of planar n-i-p heterojunction devices with MAPbI3 (MA = CH3NH3+) that display a performance that not only is enhanced by ≈25% compared to solar cells where the active layer is produced without the use of a gelator but that also features a higher stability to moisture and a reduced hysteresis. Most importantly, the presented approach is straightforward and simple, and it provides a general method to render the film formation of hybrid perovskites more reliable and robust, analogous to the control that is afforded by these additives in the processing of commodity “plastics.”

Microspheres Prepared by Internal Gelation - Understanding of HMTA and urea reactions

International Nuclear Information System (INIS)

Robisson, A.C.; Dauby, J.; Grandjean, S.; Benay, G.; Modolo, G.

2008-01-01

Homogenous microspheres of minor actinide (hereafter MA) compounds are of interest to prevent the generation and dispersal of MA powder at the early stages of the fabrication of targets for homogenous or heterogeneous transmutation. Sol-gel routes are being investigated as one of the possible solutions for producing these homogeneous starting materials. This document describes internal gelation basis experiments led at Cea Marcoule and at the Institute for Energy Research Juelich dedicated to the synthesis of mixed compounds including MAs, particularly mixed actinide-actinide or mixed actinide-inert element compounds. Parameter studies were undertaken by simulating cations in order to scan a larger range of conditions and to optimise more easily gelation conditions. With these experiments, key parameters were put forward and the main successive reactions taking care during gelation were understood. (authors)

Dynamic covalent gels assembled from small molecules:from discrete gelators to dynamic covalent polymers

Institute of Scientific and Technical Information of China (English)

Jian-Yong Zhang; Li-Hua Zeng; Juan Feng

2017-01-01

Dynamic covalent chemistry has emerged recently to be a powerful tool to construct functional materials.This article reviews the progress in the research and development of dynamic covalent chemistry in gels assembled from small molecules.First dynamic covalent reactions used in gels are reviewed to understand the dynamic covalent bonding.Afterwards the catalogues of dynamic covalent gels are reviewed according to the nature of gelators and the interactions between gelators.Dynamic covalent bonding can be involved to form low molecular weight gelators.Low molecular weight molecules with multiple functional groups react to form dynamic covalent cross-linked polymers and act as gelators.Two catalogues of gels show different properties arising from their different structures.This review aims to illustrate the structure-property relationships of these dynamic covalent gels.

Fabrication of uranium-based ceramics using internal gelation for the conversion of trivalent actinides

International Nuclear Information System (INIS)

Daniels, Henrik

2012-01-01

Alternative to today's direct final waste disposal strategy of long-lived radionuclides, for example the minor actinides neptunium, americium, curium and californium, is their selective separation from the radioactive wastestream with subsequent transmutation by neutron irradiation. Hereby it is possible to obtain nuclides with a lower risk-potential concerning their radiotoxicity. 1 neutron irradiation can be carried out either with neutron sources or in the next generation of nuclear reactors. Before the treatment, the minor actinides need to be converted in a suitable chemical and physical form. Internal gelation offers a route through which amorphous gel-spheres can be obtained directly from a metal-salt solution. Due to the presence of different types of metal ions as well as changing pH-values in a stock solution, a complex hydrolysis behaviour of these elements before and during gelation occurs. Therefore, investigations with uranium and neodymium as a minor actinide surrogate were carried out. As a result of suitable gelation-parameters, uraniumneodymium gel-spheres were successfully synthesised. The spheres also stayed intact during the subsequent thermal treatment. Based upon these findings, uranium-plutonium and uranium-americium gels were successfully created. For theses systems, the determined parameters for the uraniumneodymium gelation could also be applied. Additionally, investigations to reduce the acidity of uranium-based stock solutions for internal gelation were carried out. The necessary amount of urea and hexamethylenetetramine to induce gelation could hereby be decreased. This lead to a general increase of the gel quality and made it possible to carry out uranium-americium gelation in the first place. To investigate the stability of urea and hexamethylenetetramine, solutions of these chemicals were irradiated with different radiation doses. These chemicals showed a high stability against radiolysis in aqueous solutions.

Gelation of mucin: Protecting the stomach from autodigestion

Science.gov (United States)

Bansil, Rama

2011-03-01

In this talk I will describe the molecular mechanisms involved in the remarkable ability of the mucus lining of the stomach for protecting the stomach from being digested by the acidic gastric juices that it secretes. These physical properties can be attributed to the presence of a high molecular weight glycoprotein found in mucus, called mucin. Rheology and other measurements show that gastric mucin forms a gel under acidic pH. A model of gelation based on the interplay of hydrophobic and electrostatic interactions will be discussed. Molecular Dynamics simulation studies of folding and aggregation of mucin domains provide further support for this model. The relevance of gelation to the motion of the ulcer causing bacterium H. pylori will be discussed.

Gelation on heating of supercooled gelatin solutions.

Science.gov (United States)

Guigo, Nathanaël; Sbirrazzuoli, Nicolas; Vyazovkin, Sergey

2012-04-23

Diluted (1.0-1.5 wt%) aqueous gelatin solutions have been cooled to -10 °C at a cooling rate 20 °C min(-1) without freezing and detectable gelation. When heated at a constant heating rate (0.5 -2 °C min(-1)), the obtained supercooled solutions demonstrate an atypical process of gelation that has been characterized by regular and stochastically modulated differential scanning calorimetry (DSC) as well as by isoconversional kinetic analysis. The process is detectable as an exothermic peak in the total heat flow of regular DSC and in the nonreversing heat flow of stochastically modulated DSC. Isoconversional kinetic analysis applied to DSC data reveals that the effective activation energy of the process increases from approximately 75 to 200 kJ mol(-1) as a supercooled solution transforms to gel on continuous heating. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of the molecular weight of a neutral polysaccharide on soy protein gelation.

Science.gov (United States)

Monteiro, Sónia R; Lopes-da-Silva, José A

2017-12-01

The effects of galactomannans with different molecular weights on the heat-induced gelation characteristics of soybean protein were investigated using dynamic small-strain rheometry, under conditions where the proteins carry a net negative charge (pH7). Microstructure of the resulting gels was investigated by confocal laser scanning microscopy. Phase-separated systems were obtained with different morphologies and degree of phase separation, depending on both biopolymer concentrations and polysaccharide molecular weight. In general, a gelling enhancing effect on soy proteins was verified, despite extensive phase-separation processes observed at the higher polysaccharide molecular weight. This effect was demonstrated by an increase of the gelation rate, a decrease in the temperature at the onset of gelation, and an increase of gel stiffness and elastic character, with the length of polysaccharide chains. Overall, the results obtained established that the judicious selection of the galactomannan molecular weight may be used to modify the structure and gelation properties of soy proteins, originating a diversity of rheological characteristics and microstructures that will impact on the design of novel food formulations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Solubility and dissolution improvement of ketoprofen by emulsification ionic gelation

Science.gov (United States)

Rachmaniar, Revika; Tristiyanti, Deby; Hamdani, Syarif; Afifah

2018-02-01

Ketoprofen or [2-(3-benzoylphenyl) propionic acid] is non-steroidal anti-inflammatory (NSAID) and an analgesic which has high permeability and low solubility. The purpose of this work was to improve the solubility and dissolution of poorly water-soluble ketoprofen prepared by emulsification ionic gelation method and utilizing polymer (chitosan) and cross linker (tripolyphosphate, TPP) for particles formulation. The results show that increasing pH value of TPP, higher solubility and dissolution of as-prepared ketoprofen-chitosan was obtained. The solubility in water of ketoprofen-chitosan with pH 6 for TPP increased 2.71-fold compared to untreated ketoprofen. While the dissolution of ketoprofen-chitosan with pH 6 of TPP in simulated gastric fluid without enzyme (0.1 N HCl), pH 4.5 buffer and simulated intestinal fluid without enzyme (phosphate buffer pH 6.8) was increased 1.9-fold, 1.6-fold and 1.2-fold compared to untreated ketoprofen for dissolution time of 30 minutes, respectively. It could be concluded that chitosan and TPP in the emulsification ionic gelation method for ketoprofen preparation effectively increases solubility and dissolution of poorly water-soluble ketoprofen.

SANS study of understanding mechanism of cold gelation of globular proteins

International Nuclear Information System (INIS)

Chinchalikar, A. J.; Kumar, Sugam; Aswal, V. K.; Wagh, A. G.; Kohlbrecher, J.

2014-01-01

Small-angle neutron scattering (SANS) has been used to probe the evolution of interaction and the resultant structures in the cold gelation of globular proteins. The cold gelation involves two steps consisting of irreversible protein deformation by heating followed by some means (e.g. increasing ionic strength) to bring them together at room temperature. We have examined the role of different salts in cold gelation of preheated aqueous Bovine Serum Albumin (BSA) protein solutions. The interactions have been modeled by two Yukawa potential combining short-range attraction and long-range repulsion. We show that in step 1 (preheated temperature effect) the deformation of protein increases the magnitude of attractive interaction but not sufficient to induce gel. The attractive interaction is further enhanced in step 2 (salt effect) to result in gel formation. The salt effect is found to be strongly depending on the valency of the counterions. The gel structure has been characterized by the mass fractals

Optimization of a shorter variable-acquisition time for legs to achieve true whole-body PET/CT images.

Science.gov (United States)

Umeda, Takuro; Miwa, Kenta; Murata, Taisuke; Miyaji, Noriaki; Wagatsuma, Kei; Motegi, Kazuki; Terauchi, Takashi; Koizumi, Mitsuru

2017-12-01

The present study aimed to qualitatively and quantitatively evaluate PET images as a function of acquisition time for various leg sizes, and to optimize a shorter variable-acquisition time protocol for legs to achieve better qualitative and quantitative accuracy of true whole-body PET/CT images. The diameters of legs to be modeled as phantoms were defined based on data derived from 53 patients. This study analyzed PET images of a NEMA phantom and three plastic bottle phantoms (diameter, 5.68, 8.54 and 10.7 cm) that simulated the human body and legs, respectively. The phantoms comprised two spheres (diameters, 10 and 17 mm) containing fluorine-18 fluorodeoxyglucose solution with sphere-to-background ratios of 4 at a background radioactivity level of 2.65 kBq/mL. All PET data were reconstructed with acquisition times ranging from 10 to 180, and 1200 s. We visually evaluated image quality and determined the coefficient of variance (CV) of the background, contrast and the quantitative %error of the hot spheres, and then determined two shorter variable-acquisition protocols for legs. Lesion detectability and quantitative accuracy determined based on maximum standardized uptake values (SUV max ) in PET images of a patient using the proposed protocols were also evaluated. A larger phantom and a shorter acquisition time resulted in increased background noise on images and decreased the contrast in hot spheres. A visual score of ≥ 1.5 was obtained when the acquisition time was ≥ 30 s for three leg phantoms, and ≥ 120 s for the NEMA phantom. The quantitative %errors of the 10- and 17-mm spheres in the leg phantoms were ± 15 and ± 10%, respectively, in PET images with a high CV (scan mean SUV max of three lesions using the current fixed-acquisition and two proposed variable-acquisition time protocols in the clinical study were 3.1, 3.1 and 3.2, respectively, which did not significantly differ. Leg acquisition time per bed position of even 30-90�

Gelation mechanism of poly(N-isopropylacrylamide)-clay nanocomposite hydrogels synthesized by photopolymerization.

Science.gov (United States)

Ferse, Bernhard; Richter, Sven; Eckert, Franziska; Kulkarni, Amit; Papadakis, Christine M; Arndt, Karl-Friedrich

2008-11-04

The gelation process of poly-(N-isopropylacrylamide)-clay nanocomposite hydrogels (PNIPAAm-clay NC gels) was investigated by dynamic and static light scattering (DLS and SLS), as well as by fluorescence correlation spectroscopy (FCS). The photopolymerization method chosen for the radical polymerizing system ensured that, when the irradiation is removed, the reaction stopped immediately. Experiments showed that shortly before the gelation threshold is reached, no changes in the DLS autocorrelation functions appear, while the monomer conversion can be observed by 1H NMR spectroscopy. These results correspond to the formation of microparticles, in which the PNIPAAm chains are closely attached to the clay platelets. During the further polymerization process, clay clusters are developed before the sol-gel threshold is reached. FCS measurements were performed to obtain information on the motion of the clay platelets inside the NC gel. The DLS method gives only an average of the motions in the gel. In a time window between 10 micros and 1 s, the clay sheets labeled with Rhodamine B show no characteristic motions.

The Metal Effect on Self-Assembling of Oxalamide Gelators Explored by Mass Spectrometry and DFT Calculations

Science.gov (United States)

Dabić, Dario; Brkljačić, Lidija; Tandarić, Tana; Žinić, Mladen; Vianello, Robert; Frkanec, Leo; Kobetić, Renata

2018-01-01

Gels formed by self-assembly of small organic molecules are of wide interest as dynamic soft materials with numerous possible applications, especially in terms of nanotechnology for functional and responsive biomaterials, biosensors, and nanowires. Four bis-oxalamides were chosen to show if electrospray ionization mass spectrometry (ESI-MS) could be used as a prediction of a good gelator and also to shed light on the gelation processes. By inspecting the gelation of several solvent, we showed that bis(amino acid)oxalamide 1 proved to be the most efficient, also being able of forming the largest observable assemblies in the gas phase. The formation of singly charged assemblies holding from one up to six monomer units is the outcome of the strong intermolecular H-bonds, particularly among terminal carboxyl groups. The variation of solvents from polar aprotic towards polar protic did not have any significant effects on the size of the assemblies. The addition of a salt such as NaOAc or Mg(OAc)2, depending on the concentration, altered the assembling. Computational analysis at the DFT level aided in the interpretation of the observed trends and revealed that individual gelator molecules spontaneously assemble to higher aggregates, but the presence of the Na+ cation disrupts any gelator organization since it becomes significantly more favorable for gelator molecules to bind Na+ cations up to the 3:1 ratio than to self-assemble, being fully in line with experimental observations reported here. [Figure not available: see fulltext.

Uranium kernel formation via internal gelation

International Nuclear Information System (INIS)

Hunt, R.D.; Collins, J.L.

2004-01-01

In the 1970s and 1980s, U.S. Department of Energy (DOE) conducted numerous studies on the fabrication of nuclear fuel particles using the internal gelation process. These amorphous kernels were prone to flaking or breaking when gases tried to escape from the kernels during calcination and sintering. These earlier kernels would not meet today's proposed specifications for reactor fuel. In the interim, the internal gelation process has been used to create hydrous metal oxide microspheres for the treatment of nuclear waste. With the renewed interest in advanced nuclear fuel by the DOE, the lessons learned from the nuclear waste studies were recently applied to the fabrication of uranium kernels, which will become tri-isotropic (TRISO) fuel particles. These process improvements included equipment modifications, small changes to the feed formulations, and a new temperature profile for the calcination and sintering. The modifications to the laboratory-scale equipment and its operation as well as small changes to the feed composition increased the product yield from 60% to 80%-99%. The new kernels were substantially less glassy, and no evidence of flaking was found. Finally, key process parameters were identified, and their effects on the uranium microspheres and kernels are discussed. (orig.)

Studies on gelation of sodium silicate hydrosol for immobilization of high level liquid waste (HLLW).

Energy Technology Data Exchange (ETDEWEB)

Abdel Raouf, M W [Hot Lab. Centre, Atomic Energy Authority, Cairo (Egypt); Sharaf El-deen, A N; El-Dessouky, M M [Military Technical College, Kobry El-Kobbah, Cairo (Egypt)

1995-10-01

Immobilization of the simulated high-level liquid waste (HLLW) was performed via the gelation with sodium silicate hydrosol at room temperature. The simulated waste in this study, was represented by the electrolytes of Li, Na, K, Cs, Co and Sr at different concentrations. Specific loading of the liquid waste with 0.6 M Mg (NO{sub 3})2 and tailoring with Al salts were tried during most of the gelation processes. Mineral acid (HCl or {sub 3}) were added during the gelation processes to achieve the gel point, especially when lower concentrations of the simulated waste were used. The obtained hydrogel were dried to obtain the solid gel form. The gelation processes were investigated in terms of the different factors that affected them, namely: temperature, pH, changes in the concentration of the initial hydrosol and the used electrolytes. The efficiency of the gelation processes was investigated from the ratio of the amount of simulated waste reacted (m mole) to the initial silicate used (m mole), i.e. X value. Lower X values were observed when using multi valent cations (higher polarizing power). A special effect of increasing the sorption of metal cations in the silica matrix was observed when Al{sup 3+} replaced Si{sup 4+} in the three-dimensional network structure of the matrix. 3 figs., 7 tabs.

Solvent-mediated pathways to gelation and phase separation in suspensions of grafted nanoparticles

KAUST Repository

Anyfantakis, Manos

2009-01-01

We explore the role of the solvent medium on the interplay between gelation and phase separation in suspensions of organosilicate planar hybrids grafted with hydrocarbon chains. We establish their phase diagram by means of dynamic light scattering, rheology and visual observations, and different routes to gelation, depending on the solvent used. In agreement with earlier works, the solvent quality for the grafted chains at a given temperature controls the balance between attractions and repulsions, and hence the phase diagram of the nanoparticles and their tendency to gel. Here we show how to tune the suspension state and hence its rheology. For decane, a good solvent for the hydrocarbon chains, gelation occurs at rather low volume fractions in the presence of phase separation. This is due to the interdigitation of solvent molecules with the grafted chains, resulting in their crystalline packing that promotes the attraction between particles. For toluene, a solvent of reduced quality for the hydrocarbon chains, no interdigitation takes place, and hence gelation is triggered by clustering at higher volume fractions before phase separation. Our results support the generic picture of complex kinetic arrest/phase separation interplay in soft matter, where phase separation can proceed, be interrupted or be completely inhibited. A number of interesting possibilities for tailoring the rheology of grafted colloidal systems emerge. © 2009 The Royal Society of Chemistry.

Oxidative enzymatic gelation of sugar beet pectin for emulsion stabilization

DEFF Research Database (Denmark)

Abang Zaidel, Dayang Norulfairuz; Meyer, Anne S.

2013-01-01

Pectin from sugar beet is derived from the sugar beet pulp residue which results when sugar beets are processed for sucrose extraction. The sugar beet pectin has poor gelationability by the classic divalentcation molecular mechanism because of a relatively high acetylation degree and short...... polygalacturonate backbone chain length. However, due to the feruloyl-substitutions on the side chains, the sugar beet pectic polysaccharides can be cross-linked via enzyme catalyzed oxidation. The enzyme kinetics and functionality of such oxidativelycross-linked sugar beet pectin, in relation to stabilizing...... emulsions has recently been investigated in model food emulsions. This paper reviews the pectin chemistry, enzymatic oxidative gelation mechanisms, interaction mechanisms of the sugar beet pectin with the emulsion droplets and explores how the gelation affects the rheology and stability of emulsion systems...

Nanospheres of alginate prepared through w/o emulsification and internal gelation with nanoparticles of CaCO3

NARCIS (Netherlands)

Paques, J.P.; Sagis, L.M.C.; Rijn, van C.J.M.; Linden, van der E.

2014-01-01

Gelled nanospheres of alginate are prepared through a single step technique involving emulsification and gelation. CaCO3 nanoparticles, together with glucono delta-lactone (GDL), are dispersed in an alginate solution, which is subsequently dispersed in an oil phase and followed by gelation of the

Driving for shorter outages

International Nuclear Information System (INIS)

Tritch, S.

1996-01-01

Nuclear plant outages are necessary to complete activities that cannot be completed during the operating cycle, such as steam generator inspection and testing, refueling, installing modifications, and performing maintenance tests. The time devoted to performing outages is normally the largest contributor to plant unavailability. Similarly, outage costs are a sizable portion of the total plant budget. The scope and quality of work done during outages directly affects operating reliability and the number of unplanned outages. Improved management and planning of outages enhances the margin of safety during the outage and results in increased plant reliability. The detailed planning and in-depth preparation that has become a necessity for driving shorter outage durations has also produced safer outages and improved post-outage reliability. Short outages require both plant and vendor management to focus on all aspects of the outage. Short outage durations, such as 26 days at South Texas or 29 days at North Anna, require power plant inter-department and intra-department teamwork and communication and vendor participation. In this paper shorter and safer outage at the 3-loop plants in the United States are explained. (J.P.N.)

Gelation under shear

Energy Technology Data Exchange (ETDEWEB)

Butler, B.D.; Hanley, H.J.M.; Straty, G.C. [National Institute of Standards and Technology, Boulder, CO (United States); Muzny, C.D. [Univ. of Colorado, Boulder, CO (United States)

1995-12-31

An experimental small angle neutron scattering (SANS) study of dense silica gels, prepared from suspensions of 24 nm colloidal silica particles at several volume fractions {theta} is discussed. Provided that {theta}{approx_lt}0.18, the scattered intensity at small wave vectors q increases as the gelation proceeds, and the structure factor S(q, t {yields} {infinity}) of the gel exhibits apparent power law behavior. Power law behavior is also observed, even for samples with {theta}>0.18, when the gel is formed under an applied shear. Shear also enhances the diffraction maximum corresponding to the inter-particle contact distance of the gel. Difficulties encountered when trying to interpret SANS data from these dense systems are outlined. Results of computer simulations intended to mimic gel formation, including computations of S(q, t), are discussed. Comments on a method to extract a fractal dimension characterizing the gel are included.

Process and equipment development for the preparation of UO2 microspheres using trichloroethylene as gelation medium (Paper No. AL-23)

International Nuclear Information System (INIS)

Suryanarayana, S.; Kumar, N.; Bamankar, Y.R.; Vaidya, V.N.; Sood, D.D.

1990-02-01

Uranium dioxide microspheres have been prepared by internal gelation process, one of the sol-gel routes for fuel fabrication. The process flow sheet for internal gelation has been modified by employing trichloroethylene(TCE) as an alternate gelation medium. Based on the modified flow sheet, a 5Kg/day assembly for the production of UO 2 microspheres has been developed and installed. (author). 1 fig

Preparation of ThO2 sols suitable for gelation into microspheres in CCl4-ammonia media

International Nuclear Information System (INIS)

Yamagishi, Shigeru; Takahashi, Yoshihisa

1985-01-01

Production conditions of ThO 2 sols are studied for satisfactorily gelling them into microspheres in CCl 4 -ammonia media, which result gel-spheres with good sphericities but need high-quality source-sols for crackfree gelation. Two-stage pH-setting techniques were added to the previously reported method, which had been developed to produce ThO 2 sols suitable for gelation in hexone-ammonia media and was characterized by preneutralization followed by neutralization under pH-control. As a result, colloid fractions of Th in sols were increased without decreasing colloid size. This enabled one to obtain crackfree, large, spherical ThO 2 particles by gelation in the CCl 4 -ammonia media. (author)

Transdermal gelation of methacrylated macromers with near-infrared light and gold nanorods

International Nuclear Information System (INIS)

Gramlich, William M; Holloway, Julianne L; Rai, Reena; Burdick, Jason A

2014-01-01

Injectable hydrogels provide locally controlled tissue bulking and a means to deliver drugs and cells to the body. The formation of hydrogels in vivo may involve the delivery of two solutions that spontaneously crosslink when mixed, with pH or temperature changes, or with light (e.g., visible or ultraviolet). With these approaches, control over the kinetics of gelation, introduction of the initiation trigger (e.g., limited penetration of ultraviolet light through tissues), or alteration of the material physical properties (e.g., mechanics) may be difficult to achieve. To overcome these limitations, we used the interaction of near-infrared (NIR) light with gold nanorods (AuNRs) to generate heat through the photothermal effect. NIR light penetrates tissues to a greater extent than other wavelengths and provides a means to indirectly initiate radical polymerization. Specifically, this heating coupled with a thermal initiator (VA-044) produced radicals that polymerized methacrylated hyaluronic acid (MeHA) and generated hydrogels. A range of VA-044 concentrations changed the gelation time, yielding a system stable at 37 ° C for 22 min that gels quickly (∼3 min) when heated to 55 ° C. With a constant irradiation time (10 min) and laser power (0.3 W), different VA-044 and AuNR concentrations tuned the compressive modulus of the hydrogel. By changing the NIR irradiation time we attained a wide range of moduli at a set solution composition. In vivo mouse studies confirmed that NIR laser irradiation through tissue could gel an injected precursor solution transdermally. (paper)

Transdermal gelation of methacrylated macromers with near-infrared light and gold nanorods

Science.gov (United States)

Gramlich, William M.; Holloway, Julianne L.; Rai, Reena; Burdick, Jason A.

2014-01-01

Injectable hydrogels provide locally controlled tissue bulking and a means to deliver drugs and cells to the body. The formation of hydrogels in vivo may involve the delivery of two solutions that spontaneously crosslink when mixed, with pH or temperature changes, or with light (e.g., visible or ultraviolet). With these approaches, control over the kinetics of gelation, introduction of the initiation trigger (e.g., limited penetration of ultraviolet light through tissues), or alteration of the material physical properties (e.g., mechanics) may be difficult to achieve. To overcome these limitations, we used the interaction of near-infrared (NIR) light with gold nanorods (AuNRs) to generate heat through the photothermal effect. NIR light penetrates tissues to a greater extent than other wavelengths and provides a means to indirectly initiate radical polymerization. Specifically, this heating coupled with a thermal initiator (VA-044) produced radicals that polymerized methacrylated hyaluronic acid (MeHA) and generated hydrogels. A range of VA-044 concentrations changed the gelation time, yielding a system stable at 37 ° C for 22 min that gels quickly (˜3 min) when heated to 55 ° C. With a constant irradiation time (10 min) and laser power (0.3 W), different VA-044 and AuNR concentrations tuned the compressive modulus of the hydrogel. By changing the NIR irradiation time we attained a wide range of moduli at a set solution composition. In vivo mouse studies confirmed that NIR laser irradiation through tissue could gel an injected precursor solution transdermally.

Conductive Screen Printing Inks by Gelation of Graphene Dispersions

NARCIS (Netherlands)

Arapov, K.; Rubingh, E.; Abbel, R.J.; Laven, J.; With, G. de; Friedrich, H.

2016-01-01

This paper describes the gelation of highly concentrated graphene/polymer dispersions triggered by mild heating. The gel formation is only dependent on the concentration of graphene with 3.25 mg mL-1 as the minimum value for graphene network formation. The graphene gel is then utilized for the

Effect of Sol Concentration, Aging and Drying Process on Cerium Stabilization Zirconium Gel Produced by External Gelation

Science.gov (United States)

Sukarsono, R.; Rachmawati, M.; Susilowati, S. R.; Husnurrofiq, D.; Nurwidyaningrum, K.; Dewi, A. K.

2018-02-01

Cerium Stabilized Zirconium gel has been prepared using external gelation process. As the raw materials was used ZrO(NO3)2 and Ce(NO3)4 nitrate salt which was dissolved with water into Zr-Ce nitrate mixture. The concentration of the nitrate salt mixture in the sol solution was varied by varying the concentration of zirconium and cerium nitrate in the sol solution and the addition of PVA and THFA to produce a sol with a viscosity of 40-60 cP. The viscosity range of 40-60cP is the viscosity of the sol solution that was easy to produce a good gel in the gelation apparatus. Sol solution was casted in a gelation column equipped with following tools: a 1 mm diameter drip nozzle which was vibrated to adjust the best frequency and amplitude of vibration, a flow meter to measure the flow rate of sol, flowing of NH3 gas to presolidification process. Gelation column was contained NH4OH solution as gelation medium and gel container to collect gel product. Gel obtained from the gelation process than processed with ageing, washing, drying and calcinations to get round gel and not broken at calcinations up to 500°C. The parameters observed in this research are variation of Zr nitrate concentration, Ce nitrate concentration, ratio of Zr and Ce in the sol and ageing and drying process method which was appropriate to get a good gel. From the gelation processes that has been done, it can be seen that with the presolidification process can be obtained a round gel and without presolidification process, produce not round gel. In the process of ageing to get not broken gel, ageing was done on the rotary flask so that during the ageing, gels rotate in gelation media. Gels, then be washed by dilute ammonium nitrate, demireralized water and iso prophyl alcohol. The washed gel was then dried by vacuum drying to form pores on the gel which become the path for the gases resulting from decomposition of the gel to exit the gel. Vacuum drying can prevent cracking because the pores allow the gel

Time-oriented experimental design method to optimize hydrophilic matrix formulations with gelation kinetics and drug release profiles.

Science.gov (United States)

Shin, Sangmun; Choi, Du Hyung; Truong, Nguyen Khoa Viet; Kim, Nam Ah; Chu, Kyung Rok; Jeong, Seong Hoon

2011-04-04

A new experimental design methodology was developed by integrating the response surface methodology and the time series modeling. The major purposes were to identify significant factors in determining swelling and release rate from matrix tablets and their relative factor levels for optimizing the experimental responses. Properties of tablet swelling and drug release were assessed with ten factors and two default factors, a hydrophilic model drug (terazosin) and magnesium stearate, and compared with target values. The selected input control factors were arranged in a mixture simplex lattice design with 21 experimental runs. The obtained optimal settings for gelation were PEO, LH-11, Syloid, and Pharmacoat with weight ratios of 215.33 (88.50%), 5.68 (2.33%), 19.27 (7.92%), and 3.04 (1.25%), respectively. The optimal settings for drug release were PEO and citric acid with weight ratios of 191.99 (78.91%) and 51.32 (21.09%), respectively. Based on the results of matrix swelling and drug release, the optimal solutions, target values, and validation experiment results over time were similar and showed consistent patterns with very small biases. The experimental design methodology could be a very promising experimental design method to obtain maximum information with limited time and resources. It could also be very useful in formulation studies by providing a systematic and reliable screening method to characterize significant factors in the sustained release matrix tablet. Copyright © 2011 Elsevier B.V. All rights reserved.

Towards a fully synthetic substitute of alginate: optimization of a thermal gelation/chemical cross-linking scheme ("tandem" gelation) for the production of beads and liquid-core capsules.

Science.gov (United States)

Cellesi, F; Weber, W; Fussenegger, M; Hubbell, J A; Tirelli, N

2004-12-20

Fully synthetic polymers were used for the preparation of hydrogel beads and capsules, in a processing scheme that, originally designed for calcium alginate, was adapted to a "tandem" process, that is the combination a physical gelation with a chemical cross-linking. The polymers feature a Tetronic backbone (tetra armed Pluronics), which exhibits a reverse thermal gelation in water solutions within a physiological range of temperatures and pHs. The polymers bear terminal reactive groups that allow for a mild, but effective chemical cross-linking. Given an appropriate temperature jump, the thermal gelation provides a hardening kinetics similar to that of alginate. With slower kinetics, the chemical cross-linking then develops an irreversible and elastic gel structure, and determines its transport properties. In the present article this process has been optimized for the production of monodisperse, high elastic, hydrogel microbeads, and liquid-core microcapsules. We also show the feasibility of the use of liquid-core microcapsules in cell encapsulation. In preliminary experiments, CHO cells have been successfully encapsulated preserving their viability during the process and after incubation. The advantages of this process are mainly in the use of synthetic polymers, which provide great flexibility in the molecular design. This, in principle, allows for a precise tailoring of mechanical and transport properties and of bioactivity of the hydrogels, and also for a precise control in material purification.

Pinning of phase separation of aqueous solution of hydroxypropylmethylcellulose by gelation

Science.gov (United States)

Kita, Rio; Kaku, Takeshi; Kubota, Kenji; Dobashi, Toshiaki

1999-08-01

Opalescence of the aqueous solution of hydroxypropylmethylcellulose (HPMC) induced by heating has been studied in terms of the phase diagram and the phase separation dynamics. The cloud point curve and the sol-to-gel transition curve intersected with each other at about 55 °C. Just above the cloud-point curve at which the spinodal curve has its minimum, a ring-like scattering pattern appeared corresponding to the spinodal decomposition. Temporal growth of the scattering function in the course of phase separation was studied by a time-resolved light scattering technique. The gelation pinned the phase separation (spinodal decomposition) of the aqueous HPMC solution.

Pectin gelation with chlorhexidine: Physico-chemical studies in dilute solutions.

Science.gov (United States)

Lascol, Manon; Bourgeois, Sandrine; Guillière, Florence; Hangouët, Marie; Raffin, Guy; Marote, Pedro; Lantéri, Pierre; Bordes, Claire

2016-10-05

Low methoxyl pectin is known to gel with divalent cations (e.g. Ca(2+), Zn(2+)). In this study, a new way of pectin gelation in the presence of an active pharmaceutical ingredient, chlorhexidine (CX), was highlighted. Thus chlorhexidine interactions with pectin were investigated and compared with the well-known pectin/Ca(2+) binding model. Gelation mechanisms were studied by several physico-chemical methods such as zeta potential, viscosity, size measurements and binding isotherm was determined by Proton Nuclear Magnetic Resonance Spectroscopy ((1)H NMR). The binding process exhibited similar first two steps for both divalent ions: a stoichiometric monocomplexation of the polymer followed by a dimerization step. However, stronger interactions were observed between pectin and chlorhexidine. Moreover, the dimerization step occurred under stoichiometric conditions with chlorhexidine whereas non-stoichiometric conditions were involved with calcium ions. In the case of chlorhexidine, an additional intermolecular binding occurred in a third step. Copyright © 2016 Elsevier Ltd. All rights reserved.

Preparation of ThO2 sols having colloid-size distributions suitable for gelation into microspheres

International Nuclear Information System (INIS)

Yamagishi, Shigeru; Takahashi, Yoshihisa; Shiba, Koreyuki

1984-01-01

Production conditions of ThO 2 sols suitable for gelling into crackfree microspheres in an external gelation process were studied. The sols were prepared under pH control and colloid size distributions of the resulting sols were determined. The gelation was carried out by using hexone as a drop formation medium and ammonia as a gelling agent. The crackfree gelation was achieved by the use of ThO 2 sols produced under favorable pH, which were large in colloid size and high in colloid fraction. ''Preneutralization'' preceding the pH control is also important for the good sols. Analyzing the colloid fraction, colloid size and crystallite size of sol, it was found that, under the favorable pH, colloid nuclei generating at early stages grow in the form of single-crystals with their number kept constant and, after cooling, they exist as polycrystalline colloids. The mechanism of cracking is also discussed. (author)

Peptide Drug Release Behavior from Biodegradable Temperature-Responsive Injectable Hydrogels Exhibiting Irreversible Gelation

Directory of Open Access Journals (Sweden)

Kazuyuki Takata

2017-10-01

Full Text Available We investigated the release behavior of glucagon-like peptide-1 (GLP-1 from a biodegradable injectable polymer (IP hydrogel. This hydrogel shows temperature-responsive irreversible gelation due to the covalent bond formation through a thiol-ene reaction. In vitro sustained release of GLP-1 from an irreversible IP formulation (F(P1/D+PA40 was observed compared with a reversible (physical gelation IP formulation (F(P1. Moreover, pharmaceutically active levels of GLP-1 were maintained in blood after subcutaneous injection of the irreversible IP formulation into rats. This system should be useful for the minimally invasive sustained drug release of peptide drugs and other water-soluble bioactive reagents.

Enzyme catalyzed oxidative gelation of sugar beet pectin: Kinetics and rheology

DEFF Research Database (Denmark)

Abang Zaidel, Dayang Norulfairuz; Chronakis, Ioannis S.; Meyer, Anne S.

2012-01-01

Sugar beet pectin (SBP) is a marginally utilized co-processing product from sugar production from sugar beets. In this study, the kinetics of oxidative gelation of SBP, taking place via enzyme catalyzed cross-linking of ferulic acid moieties (FA), was studied using small angle oscillatory...

Gelation of Oil upon Contact with Water: A Bioinspired Scheme for the Self-Repair of Oil Leaks from Underwater Tubes.

Science.gov (United States)

Oh, Hyuntaek; Yaraghi, Nicholas; Raghavan, Srinivasa R

2015-05-19

Molecular organogelators convert oils into gels by forming self-assembled fibrous networks. Here, we demonstrate that such gelation can be activated by contacting the oil with an immiscible solvent (water). Our gelator is dibenzylidene sorbitol (DBS), which forms a low-viscosity sol when added to toluene containing a small amount of dimethyl sulfoxide (DMSO). Upon contact with water, DMSO partitions into the water, activating gelation of DBS in the toluene. The gel grows from the oil/water interface and slowly envelops the oil phase. We have exploited this effect for the self-repair of oil leaks from underwater tubes. When a DBS/toluene/DMSO solution flows through the tube, it forms a gel selectively at the leak point, thereby plugging the leak and restoring flow. Our approach is reminiscent of wound-sealing via blood-clotting: there also, inactive gelators in blood are activated at the wound site into a fibrous network, thereby plugging the wound and restoring blood flow.

Effects of irradiation on the gelation properties of muscle protein

International Nuclear Information System (INIS)

Lin Xianping; Yang Wenge

2014-01-01

Gel properties of muscle protein are the important functional characteristics in meat and its products. which determine the meat products' unique quality. such as texture. Juiciness. fat content and sensory characteristics As a novel food preservation technique, irradiation may lead to changes in the composition and structure of protein molecule. and impact the gel forming ability and gelation properties of muscle protein. Based on the introduction of gel forming mechanism of muscle protein, effects of irradiation on the water holding capacity, mechanical properties and structure of muscle protein gel were reviewed in detail. High-dose irradiation could weaken the water holding capacity of muscle protein and result in the loss of meat juice. With different irradiation conditions or raw materials, influences of irradiation on the texture and theological properties of muscle protein gels are varied, and effects on the structure of muscle protein and its gel are more complex. Finally, the research trend of irradiation effects on the gelation properties of muscle protein is put forward. (authors)

Rheological and gelation properties of rice starch modified with 4-alpha-glucanotransferase.

Science.gov (United States)

Lee, Kwang Yeon; Kim, Yong-Ro; Park, Kwan Hwa; Lee, Hyeon Gyu

2008-04-01

Rheological measurements were performed to characterize rice starch modified with 4-alpha-glucanotransferase (4alphaGTase) isolated from Thermus scotoductus, in terms of effects of the enzyme and starch concentration on flow behavior, gel strength, and melting and gelling kinetics of the modified rice starch. Consistency index decreased and flow behavior index increased with the level of enzyme treatment, and at high level of enzyme treatment, it demonstrated Bingham plastic behavior. As the level of enzyme decreased and the starch concentration increased, gelation time decreased and the final gel strength increased significantly. Regardless of treatment variables, all the modified starch gels melted at similar temperature.

Comparing and correlating solubility parameters governing the self-assembly of molecular gels using 1,3:2,4-dibenzylidene sorbitol as the gelator.

Science.gov (United States)

Lan, Yaqi; Corradini, Maria G; Liu, Xia; May, Tim E; Borondics, Ferenc; Weiss, Richard G; Rogers, Michael A

2014-12-02

Solvent properties play a central role in mediating the aggregation and self-assembly of molecular gelators and their growth into fibers. Numerous attempts have been made to correlate the solubility parameters of solvents and gelation abilities of molecular gelators, but a comprehensive comparison of the most important parameters has yet to appear. Here, the degree to which partition coefficients (log P), Henry's law constants (HLC), dipole moments, static relative permittivities (ε(r)), solvatochromic E(T)(30) parameters, Kamlet-Taft parameters (β, α, and π), Catalan's solvatochromic parameters (SPP, SB, and SA), Hildebrand solubility parameters (δ(i)), and Hansen solubility parameters (δ(p), δ(d), δ(h)) and the associated Hansen distance (R(ij)) of 62 solvents (covering a wide range of properties) can be correlated with the self-assembly and gelation of 1,3:2,4-dibenzylidene sorbitol (DBS) gelation, a classic molecular gelator, is assessed systematically. The approach presented describes the basis for each of the parameters and how it can be applied. As such, it is an instructional blueprint for how to assess the appropriate type of solvent parameter for use with other molecular gelators as well as with molecules forming other types of self-assembled materials. The results also reveal several important insights into the factors favoring the gelation of solvents by DBS. The ability of a solvent to accept or donate a hydrogen bond is much more important than solvent polarity in determining whether mixtures with DBS become solutions, clear gels, or opaque gels. Thermodynamically derived parameters could not be correlated to the physical properties of the molecular gels unless they were dissected into their individual HSPs. The DBS solvent phases tend to cluster in regions of Hansen space and are highly influenced by the hydrogen-bonding HSP, δ(h). It is also found that the fate of this molecular gelator, unlike that of polymers, is influenced not only by

In Situ Observations of Thermoreversible Gelation and Phase Separation of Agarose and Methylcellulose Solutions under High Pressure.

Science.gov (United States)

Kometani, Noritsugu; Tanabe, Masahiro; Su, Lei; Yang, Kun; Nishinari, Katsuyoshi

2015-06-04

Thermoreversible sol-gel transitions of agarose and methylcellulose (MC) aqueous solutions on isobaric cooling or heating under high pressure up to 400 MPa have been investigated by in situ observations of optical transmittance and falling-ball experiments. For agarose, which undergoes the gelation on cooling, the application of pressure caused a gradual rise in the cloud-point temperature over the whole pressure range examined, which is almost consistent with the pressure dependence of gelling temperature estimated by falling-ball experiments, suggesting that agarose gel is stabilized by compression and that the gelation occurs nearly in parallel with phase separation under ambient and high-pressure conditions. For MC, which undergoes the gelation on heating, the cloud-point temperature showed a slight rise with an initial elevation of pressure up to ∼150 MPa, whereas it showed a marked depression above 200 MPa. In contrast, the gelling temperature of MC, which is nearly identical to the cloud-point temperature at ambient pressure, showed a monotonous rise with increasing pressure up to 350 MPa, which means that MC undergoes phase separation prior to gelation on heating under high pressure above 200 MPa. Similar results were obtained for the melting process of MC gel on cooling. The unique behavior of the sol-gel transition of MC under high pressure has been interpreted in terms of the destruction of hydrophobic hydration by compression.

Effect of gum tragacanth exuded by three Iranian Astragalus on mixed milk protein system during acid gelation.

Science.gov (United States)

Nejatian, Mohammad; Hatami, Masoud; Mohammadifar, Mohammad Amin

2013-02-01

The effects of various concentrations of three species of gum tragacanth on the gelation process, microstructure and viscoelastic properties of milk protein mixed gels acidified at 37°C by glucono-δ-lactone (GDL) were investigated using dynamic rheometry and microscopy. According to rheological measurements, the addition of gum tragacanth in the range of 0.05-0.2% (w/w) into milk protein dispersions led to a weaker structure for the milk protein network, compared to the control sample. This weakening effect could be eliminated by adding 0.3% (w/w) gum tragacanth exudates from A. gossypinus; the compositional features of gum tragacanth may have been responsible for the improved protein-protein interactions, greater structural strength and reduced gelation time onset. It was determined by scanning electron microscopy that the addition of gum tragacanth at a low concentration caused the density of the matrix to increase, while an open structure was observed in the presence of a higher gum concentration. Copyright © 2012 Elsevier B.V. All rights reserved.

Use of different additives to improve low quality surimi gelation.

Directory of Open Access Journals (Sweden)

Deysi Cando

2014-06-01

In conclusion, in general, the physicochemical and viscoelastic properties of gels were improved by the addition of both ingredients, giving stronger gels even at very low level of salt. These results indicate that both ingredients, which do not add calories to the final gels, can be used as a good alternative for the better gelation of the low quality surimis.

Thiol-Ene Photo-Click Collagen-PEG Hydrogels: Impact of Water-Soluble Photoinitiators on Cell Viability, Gelation Kinetics and Rheological Properties

Directory of Open Access Journals (Sweden)

Róisín Holmes

2017-06-01

Full Text Available Thiol-ene photo-click hydrogels were prepared via step-growth polymerisation using thiol-functionalised type-I collagen and 8-arm poly(ethylene glycol norbornene-terminated (PEG-NB, as a potential injectable regenerative device. Type-I collagen was thiol-functionalised by a ring opening reaction with 2-iminothiolane (2IT, whereby up to 80 Abs.% functionalisation and 90 RPN% triple helical preservation were recorded via 2,4,6-Trinitrobenzenesulfonic acid (TNBS colorimetric assay and circular dichroism (CD. Type, i.e., either 2-Hydroxy-1-[4-(2-hydroxyethoxy phenyl]-2-methyl-1-propanone (I2959 or lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP, and concentration of photoinitiator were varied to ensure minimal photoinitiator-induced cytotoxicity and to enable thiol-ene network formation of collagen-PEG mixtures. The viability of G292 cells following 24 h culture in photoinitiator-supplemented media was largely affected by the photoinitiator concentration, with I2959-supplemented media observed to induce higher toxic response (0.1 → 0.5% (w/v I2959, cell survival: 62 → 2 Abs.% compared to LAP-supplemented media (cell survival: 86 → 8 Abs.%. In line with the in vitro study, selected photoinitiator concentrations were used to prepare thiol-ene photo-click hydrogels. Gelation kinetics proved to be largely affected by the specific photoinitiator, with LAP-containing thiol-ene mixtures leading to significantly reduced complete gelation time (τ: 187 s with respect to I2959-containing mixtures (τ: 1683 s. Other than the specific photoinitiator, the photoinitiator concentration was key to adjusting the hydrogel storage modulus (G’, whereby 15-fold G’ increase (232 → 3360 Pa was observed in samples prepared with 0.5% (w/v compared to 0.1% (w/v LAP. Further thiol-ene formulations with 0.5% (w/v LAP and varied content of PEG-NB were tested to prepare photo-click hydrogels with porous architecture, as well as tunable storage modulus (G�

Inhibition and Promotion of Heat-Induced Gelation of Whey Proteins in the Presence of Calcium by Addition of Sodium Caseinate.

Science.gov (United States)

Nguyen, Bach T; Balakrishnan, Gireeshkumar; Jacquette, Boris; Nicolai, Taco; Chassenieux, Christophe; Schmitt, Christophe; Bovetto, Lionel

2016-11-14

Heat-induced aggregation and gelation of aqueous solutions of whey protein isolate (WPI) in the presence of sodium caseinate (SC) and CaCl 2 was studied at pH 6.6. The effect of adding SC (0-100 g/L) on the structure of the aggregates and the gels was investigated by light scattering and confocal laser scanning microscopy at different CaCl 2 concentration ([CaCl 2 ] = 0-30 mM). The gelation process was studied by oscillatory shear rheology. At the whey protein concentrations studied here (34 and 60 g/L), no gels were formed in the absence of CaCl 2 and SC. However, WPI solutions gelled above a critical CaCl 2 concentration that increased with increasing SC concentration. In the absence of CaCl 2 , WPI gels were formed only above a critical SC concentration. The critical SC concentration needed to induce WPI gelation decreased weakly when CaCl 2 was added. In an intermediate range of CaCl 2 concentrations, gels were formed both at low and high SC concentrations, but not at intermediate SC concentrations. Finally, at high CaCl 2 concentrations gels were formed at all SC concentrations. The gelation rate and the gel structure of the gels formed at low and high casein concentrations were very different. The effect of SC on the thermal gelation of WPI was interpreted by competition for Ca 2+ , a chaperon effect, and microphase separation.

Solvent-mediated pathways to gelation and phase separation in suspensions of grafted nanoparticles

KAUST Repository

Anyfantakis, Manos; Bourlinos, Athanasios; Vlassopoulos, Dimitris; Fytas, George; Giannelis, Emmanuel; Kumar, Sanat K.

2009-01-01

, rheology and visual observations, and different routes to gelation, depending on the solvent used. In agreement with earlier works, the solvent quality for the grafted chains at a given temperature controls the balance between attractions and repulsions

Effect of protease inhibitors on thermal gelation of squid (Illex argentinus. mantle paste

Directory of Open Access Journals (Sweden)

Maria Elida Paredi

2014-04-01

Full Text Available The characteristics of the thermal gelation of squid mantle paste and the effect of protease inhibitors on them were investigated. Pastes in the absence and presence the protease inhibitors, ethylendiaminetetracetic acid (EDTA and phenylmethylsulfonyl fluoride (PMSF, were formulated. Pastes were made by the respective one or two step thermal treatments: direct heating at 85°C for 20 min and preincubation at 27 or 40 °C for 3 or 2 hours, followed by heating at 85 °C for 20 min. The gel strength, water holding capacity (WHC and whiteness of gelled pastes were analyzed. The tricloroacetic acid (TCA soluble peptides in homogenate of the muscle were determined. Gel strength decreased when heating was made in two steps. EDTA and PMSF were effective in avoiding that decrease when pre-incubation was made at 40 °C. Maximum gel strength was observed for the gels in presence of EDTA, giving values of 255 and 219 g x cm for the samples made by direct heating and pre-incubated at 40 °C  respectively. TCA soluble peptides increased between 20 and 60 °C, with maximum values reached at 30 and 60 °C. No significant differences (p>0.05 were observed in gel whiteness, neither with the thermal treatment nor with the inhibitors. The WHC was higher (p<0.05 in the gelated paste formulated with EDTA. These results show a good gelation capacity of I argentinus pastes and improvements with protease inhibitors. 

Acceleration of gelation and promotion of mineralization of chitosan hydrogels by alkaline phosphatase

NARCIS (Netherlands)

Douglas, T.E.L.; Skwarczynska, A.; Modrzejewska, Z.; Balcaen, L.; Schaubroeck, D.; Lycke, S.; Vanhaecke, F.; Vandenabeele, P.; Dubruel, P.; Jansen, J.A.; Leeuwenburgh, S.C.G.

2013-01-01

Thermosensitive chitosan hydrogels containing sodium beta-glycerophosphate (beta-GP), whose gelation is induced by increasing temperature to body temperature, were functionalized by incorporation of alkaline phosphatase (ALP), an enzyme involved in mineralization of bone. ALP incorporation led to

Chitosan microparticles: influence of the gelation process on the release profile and oral bioavailability of albendazole, a class II compound.

Science.gov (United States)

Piccirilli, Gisela N; García, Agustina; Leonardi, Darío; Mamprin, María E; Bolmaro, Raúl E; Salomón, Claudio J; Lamas, María C

2014-11-01

Encapsulation of albendazole, a class II compound, into polymeric microparticles based on chitosan-sodium lauryl sulfate was investigated as a strategy to improve drug dissolution and oral bioavailability. The microparticles were prepared by spray drying technique and further characterized by means of X-ray powder diffractometry, infrared spectroscopy and scanning electron microscopy. The formation of a novel polymeric structure between chitosan and sodium lauryl sulfate, after the internal or external gelation process, was observed by infrared spectroscopy. The efficiency of encapsulation was found to be between 60 and 85% depending on the internal or external gelation process. Almost spherically spray dried microparticles were observed using scanning electron microscopy. In vitro dissolution results indicated that the microparticles prepared by internal gelation released 8% of the drug within 30 min, while the microparticles prepared by external gelation released 67% within 30 min. It was observed that the AUC and Cmax values of ABZ from microparticles were greatly improved, in comparison with the non-encapsulated drug. In conclusion, the release properties and oral bioavailability of albendazole were greatly improved by using spraydried chitosan-sodium lauryl sulphate microparticles.

Nozzleless Fabrication of Oil-Core Biopolymeric Microcapsules by the Interfacial Gelation of Pickering Emulsion Templates.

Science.gov (United States)

Leong, Jun-Yee; Tey, Beng-Ti; Tan, Chin-Ping; Chan, Eng-Seng

2015-08-05

Ionotropic gelation has been an attractive method for the fabrication of biopolymeric oil-core microcapsules due to its safe and mild processing conditions. However, the mandatory use of a nozzle system to form the microcapsules restricts the process scalability and the production of small microcapsules (microcapsules through ionotropic gelation at the interface of an O/W Pickering emulsion. This approach involves the self-assembly of calcium carbonate (CaCO3) nanoparticles at the interface of O/W emulsion droplets followed by the addition of a polyanionic biopolymer into the aqueous phase. Subsequently, CaCO3 nanoparticles are dissolved by pH reduction, thus liberating Ca(2+) ions to cross-link the surrounding polyanionic biopolymer to form a shell that encapsulates the oil droplet. We demonstrate the versatility of this method by fabricating microcapsules from different types of polyanionic biopolymers (i.e., alginate, pectin, and gellan gum) and water-immiscible liquid cores (i.e., palm olein, cyclohexane, dichloromethane, and toluene). In addition, small microcapsules with a mean size smaller than 100 μm can be produced by selecting the appropriate conventional emulsification methods available to prepare the Pickering emulsion. The simplicity and versatility of this method allows biopolymeric microcapsules to be fabricated with ease by ionotropic gelation for numerous applications.

Fabrication of uranium-based ceramics using internal gelation for the conversion of trivalent actinides; Herstellung uranbasierter Keramiken mittel interner Gelierung zur Konversion trivalenter Actinoiden

Energy Technology Data Exchange (ETDEWEB)

Daniels, Henrik

2012-07-01

Alternative to today's direct final waste disposal strategy of long-lived radionuclides, for example the minor actinides neptunium, americium, curium and californium, is their selective separation from the radioactive wastestream with subsequent transmutation by neutron irradiation. Hereby it is possible to obtain nuclides with a lower risk-potential concerning their radiotoxicity. 1 neutron irradiation can be carried out either with neutron sources or in the next generation of nuclear reactors. Before the treatment, the minor actinides need to be converted in a suitable chemical and physical form. Internal gelation offers a route through which amorphous gel-spheres can be obtained directly from a metal-salt solution. Due to the presence of different types of metal ions as well as changing pH-values in a stock solution, a complex hydrolysis behaviour of these elements before and during gelation occurs. Therefore, investigations with uranium and neodymium as a minor actinide surrogate were carried out. As a result of suitable gelation-parameters, uraniumneodymium gel-spheres were successfully synthesised. The spheres also stayed intact during the subsequent thermal treatment. Based upon these findings, uranium-plutonium and uranium-americium gels were successfully created. For theses systems, the determined parameters for the uraniumneodymium gelation could also be applied. Additionally, investigations to reduce the acidity of uranium-based stock solutions for internal gelation were carried out. The necessary amount of urea and hexamethylenetetramine to induce gelation could hereby be decreased. This lead to a general increase of the gel quality and made it possible to carry out uranium-americium gelation in the first place. To investigate the stability of urea and hexamethylenetetramine, solutions of these chemicals were irradiated with different radiation doses. These chemicals showed a high stability against radiolysis in aqueous solutions.

Effect of co-solute and gelation temperature on milk protein and gum tragacanth interaction in acidified gels.

Science.gov (United States)

Hatami, Masoud; Nejatian, Mohammad; Mohammadifar, Mohammad Amin

2012-05-01

The aim of this study was to investigate the role of process conditions and system composition on the acid-induced gelation of a mixture of milk protein and gum tragacanth. This was studied by determining the effects of co-solute (lactose) addition (3, 5 and 7%) and gelation temperature (25, 37 and 45°C) on the mixture's rheological properties and microstructure using a combination of techniques including small-deformation rheology and scanning electron microscopy. The presence of lactose played an important role in the microstructure formation of gels but did not change most rheological properties. The microstructure of gels formed in the presence of lactose was coarser and more particulate, but less interconnected; this can be explained by lactose's role in improving protein aggregation. Gels prepared at a lower temperature had a high structure strength, as indicated by their high storage modulus, τ(f) and G(f) values. Low gelation temperature also caused a more branched and homogenous microstructure. Copyright © 2012 Elsevier B.V. All rights reserved.

How do shorter working hours affect employee wellbeing? : Shortening working time in Finland

OpenAIRE

Lahdenperä, Netta

2017-01-01

The way work is done is dramatically changing due to digital breakthroughs. Generation Y is entering the workforce with a changed attitude towards work as organizations are increasing their focus towards employee wellbeing. Organizations who adopt the new model of work and understand the importance of the wellbeing of their staff are leading the transition to a more efficient business, better working life and a healthier planet. The thesis explores the numerous effects of shorter working...

Organic Gelators as Growth Control Agents for Stable and Reproducible Hybrid Perovskite-Based Solar Cells

KAUST Repository

Masi, Sofia; Rizzo, Aurora; Munir, Rahim; Listorti, Andrea; Giuri, Antonella; Esposito Corcione, Carola; Treat, Neil D.; Gigli, Giuseppe; Amassian, Aram; Stingelin, Natalie; Colella, Silvia

2017-01-01

Low-molecular-weight organic gelators are widely used to influence the solidification of polymers, with applications ranging from packaging items, food containers to organic electronic devices, including organic photovoltaics. Here, this concept

Shorter Ground Contact Time and Better Running Economy: Evidence From Female Kenyan Runners.

Science.gov (United States)

Mooses, Martin; Haile, Diresibachew W; Ojiambo, Robert; Sang, Meshack; Mooses, Kerli; Lane, Amy R; Hackney, Anthony C

2018-06-25

Mooses, M, Haile, DW, Ojiambo, R, Sang, M, Mooses, K, Lane, AR, and Hackney, AC. Shorter ground contact time and better running economy: evidence from female Kenyan runners. J Strength Cond Res XX(X): 000-000, 2018-Previously, it has been concluded that the improvement in running economy (RE) might be considered as a key to the continued improvement in performance when no further increase in V[Combining Dot Above]O2max is observed. To date, RE has been extensively studied among male East African distance runners. By contrast, there is a paucity of data on the RE of female East African runners. A total of 10 female Kenyan runners performed 3 × 1,600-m steady-state run trials on a flat outdoor clay track (400-m lap) at the intensities that corresponded to their everyday training intensities for easy, moderate, and fast running. Running economy together with gait characteristics was determined. Participants showed moderate to very good RE at the first (202 ± 26 ml·kg·km) and second (188 ± 12 ml·kg·km) run trials, respectively. Correlation analysis revealed significant relationship between ground contact time (GCT) and RE at the second run (r = 0.782; p = 0.022), which represented the intensity of anaerobic threshold. This study is the first to report the RE and gait characteristics of East African female athletes measured under everyday training settings. We provided the evidence that GCT is associated with the superior RE of the female Kenyan runners.

LABORATORY-SCALE PRODUCTION OF ADU GELS BY EXTERNAL GELATION FOR AN INTERMEDIATE HTGR NUCLEAR

Directory of Open Access Journals (Sweden)

S Simbolon

2015-03-01

Full Text Available LABORATORY-SCALE PRODUCTION OF ADU GELS BY EXTERNAL GELATION FOR AN INTERMEDIATE HTGR NUCLEAR. The The aim of this research is to produce thousands of microsphere ADU (Ammonium Diuranate gels by using external gelation for an intermediate HTGR (High Temperature Gas-cooled Reactor nuclear fuel in laboratory-scale. Microsphere ADU gels were based on sol-solution which was made from a homogeneous mixture of ADUN (Acid Deficient Uranyl Nitrate which was containing uranyl ion in high concentration, a water soluble organic compound PVA (Polyvinyl Alcohol and THFA (Tetrahydrofurfuryl Alcohol. The simple unified home made laboratory experimental machine was developed to replace test tube experiment method which was once used due to a tiny amount of microsphere ADU gels produced. It consists of four main parts: tank filled sol-solution connecting to peristaltic pump and vibrating nozzle, preliminary gelation and gelation column. The machine has successfully converted 150 mL sol-solution into thousands of drops which produced 120 - 130 drops in each minute in steady state in ammonia gas free sector. Preliminary gelation reaction was carried out in ammonia gas sector where drops react with ammonia gas in a bat an eye followed by gelation reaction in column containing ammonia solution 7 M. In ageing process, ADU gels were collected and submerged into a vessel containing ammonia solution which was shaken for 1 hour in a shaker device. Isopropyl alcohol (90% solution was used to wash ADU gels and a digital camera was used to measured spherical form of ADU gels. Diameters in spherical spheroid form were found between 1.8 mm until 2.2 mm. The spherical purity of ADU gels were 10% - 20% others were oblate, prolate spheroid and microsphere which have hugetiny of dimples on the surface.   PRODUKSI GEL ADU SKALA LABORATORIUM DENGAN MENGGUNAKAN GELASI EKSTERNAL UNTUK BAHAN BAKAR ANTARA HTGR. Penelitian ini bertujuan untuk membuat ribuan gel bulat ADU (Ammonium

Combination of high-performance refractometry and infrared spectroscopy as a probe for chemically induced gelation and vitrification of epoxies

Energy Technology Data Exchange (ETDEWEB)

Mueller, U; Philipp, M; Gervais, P-C; Sanctuary, R; Krueger, J K [Laboratoire de Physique des Materiaux, Universite du Luxembourg, 162A avenue de la faiencerie, L-1511 Luxembourg (Luxembourg); Possart, W; Wehlack, C [Fachbereich Werkstoffwissenschaften, Universitaet des Saarlandes, D-66123 Saarbruecken (Germany); Kieffer, J, E-mail: ulrich.mueller@uni.l [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI (United States)

2010-08-15

A combination of infrared spectroscopy and high-performance refractometry was used to investigate the chemically induced sol-gel and glass transition during the polymerization of epoxies. Representations of the refractive index versus chemical conversion reveal an interesting insight into the optical properties accompanying gelation and vitrification. Whereas the electronic polarizability of the liquid state of small average molecular mass and the glassy state is dominated by the mass density, an unexpected excess polarizability observed during the gelation is attributed to cooperative dipole-dipole interactions.

Combination of high-performance refractometry and infrared spectroscopy as a probe for chemically induced gelation and vitrification of epoxies

International Nuclear Information System (INIS)

Mueller, U; Philipp, M; Gervais, P-C; Sanctuary, R; Krueger, J K; Possart, W; Wehlack, C; Kieffer, J

2010-01-01

A combination of infrared spectroscopy and high-performance refractometry was used to investigate the chemically induced sol-gel and glass transition during the polymerization of epoxies. Representations of the refractive index versus chemical conversion reveal an interesting insight into the optical properties accompanying gelation and vitrification. Whereas the electronic polarizability of the liquid state of small average molecular mass and the glassy state is dominated by the mass density, an unexpected excess polarizability observed during the gelation is attributed to cooperative dipole-dipole interactions.

Silica-gel structural characterization during the initial phases of gelation and drying; Caracterizacao estrutural de geis de silica durante as etapas iniciais de gelacao e secagem

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Max Passos

1997-12-31

For centuries, glasses and ceramics have been made via melting or solid state reactions at temperatures above 100 deg C. The sol-gel process offers new approaches to the synthesis of glasses and ceramics, combining control of composition and structure at the molecular level with the ability to shape materials in bulk, powder, fiber and thin-film forms. The growth of sol-gel technology research is due to the many unique features of that class of materials. Major applications include optical elements and integrated optical devices, ceramic filters, membranes, supercondutors, magnetic, catalytic and manostructured materials to antioxidant, anticorrosion coatings and composite and biomedical materials. In this work a variety of techniques like spectroscopy, Raman spectroscopy, ultraviolet-visible spectroscopy, light scattering nuclear magnetic resonance, X ray diffraction and nitrogen adsorption have been employed to investigate the initial phase of the sol-gel transition of gamma ray irradiated tetramethoxysilane (TMOS) solutions and non-irradiated TMOS solution and to get information about the structure of the silica gels obtained under different gelation conditions. Typically the tetramethoxysilane solutions were prepared using a molar ratio of TMOS to demineralized water of 1 to 16. Some experiments were made under catalysed conditions. The mixing was carried out at room temperature. The turbidity and light scattering experiments on the polycondensation of tetramethoxysilane show that exists no drastic difference in the gelling time of a gamma ray irradiated and a non-irradiated TMOS+H{sub 2}O (1+16 M) solution. In the absence of a catalyst, the gelling time for both reactions occurs in about 3.30 h. When HNO{sub 3} (o.03 M) was used, the gelling time observed was 3 days. Raman and ultraviolet-visible spectroscopy show no drastic difference during the initial phase at the sol-gel transition under ambient temperature/pressure and under gamma radiation. The gels

Silica-gel structural characterization during the initial phases of gelation and drying; Caracterizacao estrutural de geis de silica durante as etapas iniciais de gelacao e secagem

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Max Passos

1996-12-31

For centuries, glasses and ceramics have been made via melting or solid state reactions at temperatures above 100 deg C. The sol-gel process offers new approaches to the synthesis of glasses and ceramics, combining control of composition and structure at the molecular level with the ability to shape materials in bulk, powder, fiber and thin-film forms. The growth of sol-gel technology research is due to the many unique features of that class of materials. Major applications include optical elements and integrated optical devices, ceramic filters, membranes, supercondutors, magnetic, catalytic and manostructured materials to antioxidant, anticorrosion coatings and composite and biomedical materials. In this work a variety of techniques like spectroscopy, Raman spectroscopy, ultraviolet-visible spectroscopy, light scattering nuclear magnetic resonance, X ray diffraction and nitrogen adsorption have been employed to investigate the initial phase of the sol-gel transition of gamma ray irradiated tetramethoxysilane (TMOS) solutions and non-irradiated TMOS solution and to get information about the structure of the silica gels obtained under different gelation conditions. Typically the tetramethoxysilane solutions were prepared using a molar ratio of TMOS to demineralized water of 1 to 16. Some experiments were made under catalysed conditions. The mixing was carried out at room temperature. The turbidity and light scattering experiments on the polycondensation of tetramethoxysilane show that exists no drastic difference in the gelling time of a gamma ray irradiated and a non-irradiated TMOS+H{sub 2}O (1+16 M) solution. In the absence of a catalyst, the gelling time for both reactions occurs in about 3.30 h. When HNO{sub 3} (o.03 M) was used, the gelling time observed was 3 days. Raman and ultraviolet-visible spectroscopy show no drastic difference during the initial phase at the sol-gel transition under ambient temperature/pressure and under gamma radiation. The gels

Self-produced Time Intervals Are Perceived as More Variable and/or Shorter Depending on Temporal Context in Subsecond and Suprasecond Ranges

Directory of Open Access Journals (Sweden)

Keita eMitani

2016-06-01

Full Text Available The processing of time intervals is fundamental for sensorimotor and cognitive functions. Perceptual and motor timing are often performed concurrently (e.g., playing a musical instrument. Although previous studies have shown the influence of body movements on time perception, how we perceive self-produced time intervals has remained unclear. Furthermore, it has been suggested that the timing mechanisms are distinct for the sub- and suprasecond ranges. Here, we compared perceptual performances for self-produced and passively presented time intervals in random contexts (i.e., multiple target intervals presented in a session across the sub- and suprasecond ranges (Experiment 1 and within the sub- (Experiment 2 and suprasecond (Experiment 3 ranges, and in a constant context (i.e., a single target interval presented in a session in the sub- and suprasecond ranges (Experiment 4. We show that self-produced time intervals were perceived as shorter and more variable across the sub- and suprasecond ranges and within the suprasecond range but not within the subsecond range in a random context. In a constant context, the self-produced time intervals were perceived as more variable in the suprasecond range but not in the subsecond range. The impairing effects indicate that motor timing interferes with perceptual timing. The dependence of impairment on temporal contexts suggests multiple timing mechanisms for the subsecond and suprasecond ranges. In addition, violation of the scalar property (i.e., a constant variability to target interval ratio was observed between the sub- and suprasecond ranges. The violation was clearer for motor timing than for perceptual timing. This suggests that the multiple timing mechanisms for the sub- and suprasecond ranges overlap more for perception than for motor. Moreover, the central tendency effect (i.e., where shorter base intervals are overestimated and longer base intervals are underestimated disappeared with subsecond

Controlling the aggregation and gelation of ß-lactoglobulin by the addition of its peptides

NARCIS (Netherlands)

Kosters, H.A.

2012-01-01

In this thesis the effects of peptides, or protein hydrolysates on the heat-induced aggregation and gelation of (concentrated) protein systems were studied. First, it was investigated if specific peptides could influence the heat-induced denaturation and aggregation of intact proteins solutions,

Effects of nano-scaled fish bone on the gelation properties of Alaska pollock surimi.

Science.gov (United States)

Yin, Tao; Park, Jae W

2014-05-01

Gelation properties of Alaska pollock surimi as affected by addition of nano-scaled fish bone (NFB) at different levels (0%, 0.1%, 0.25%, 0.5%, 1% and 2%) were investigated. Breaking force and penetration distance of surimi gels after setting increased significantly as NFB concentration increased up to 1%. The first peak temperature and value of storage modulus (G'), which is known to relate to the unfolding and aggregation of light meromyosin, increased as NFB concentration increased. In addition, 1% NFB treatment demonstrated the highest G' after gelation was completed. The activity of endogenous transglutaminase (TGase) in Alaska pollock surimi increased as NFB calcium concentration increased. The intensity of myosin heavy chain cross-links also increased as NFB concentration increased indicating the formation of more ε-(γ-glutamyl) lysine covalent bond by endogenous TGase and calcium ions from NFB. Copyright © 2013 Elsevier Ltd. All rights reserved.

Selective removals of heavy metals (Pb(2+), Cu(2+), and Cd(2+)) from wastewater by gelation with alginate for effective metal recovery.

Science.gov (United States)

Wang, Fei; Lu, Xingwen; Li, Xiao-yan

2016-05-05

A novel method that uses the aqueous sodium alginate solution for direct gelation with metal ions is developed for effective removal and recovery of heavy metals from industrial wastewater. The experimental study was conducted on Pb(2+), Cu(2+), and Cd(2+) as the model heavy metals. The results show that gels can be formed rapidly between the metals and alginate in less than 10 min and the gelation rates fit well with the pseudo second-order kinetic model. The optimum dosing ratio of alginate to the metal ions was found to be between 2:1 and 3:1 for removing Pb(2+) and around 4:1 for removing Cu(2+) and Cd(2+) from wastewater, and the metal removal efficiency by gelation increased as the solution pH increased. Alginate exhibited a higher gelation affinity toward Pb(2+) than Cu(2+) and Cd(2+), which allowed a selective removal of Pb(2+) from the wastewater in the presence of Cu(2+) and Cd(2+) ions. Chemical analysis of the gels suggests that the gelation mainly occurred between the metal ions and the -COO(-) and -OH groups on alginate. By simple calcination of the metal-laden gels at 700 °C for 1 h, the heavy metals can be well recovered as valuable resources. The metals obtained after the thermal treatment are in the form of PbO, CuO, and CdO nanopowders with crystal sizes of around 150, 50, and 100 nm, respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

Oil encapsulation in core-shell alginate capsules by inverse gelation II: comparison between dripping techniques using W/O or O/W emulsions.

Science.gov (United States)

Martins, Evandro; Poncelet, Denis; Rodrigues, Ramila Cristiane; Renard, Denis

2017-09-01

In the first part of this article, it was described an innovative method of oil encapsulation from dripping-inverse gelation using water-in-oil (W/O) emulsions. It was noticed that the method of oil encapsulation was quite different depending on the emulsion type (W/O or oil-in-water (O/W)) used and that the emulsion structure (W/O or O/W) had a high impact on the dripping technique and the capsules characteristics. The objective of this article was to elucidate the differences between the dripping techniques using both emulsions and compare the capsule properties (mechanical resistance and release of actives). The oil encapsulation using O/W emulsions was easier to perform and did not require the use of emulsion destabilisers. However, capsules produced from W/O emulsions were more resistant to compression and showed the slower release of actives over time. The findings detailed here widened the knowledge of the inverse gelation and gave opportunities to develop new techniques of oil encapsulation.

A saponification-triggered gelation of ester-based Zn(II) complex through conformational transformations.

Science.gov (United States)

Kumar, Ashish; Dubey, Mrigendra; Kumar, Amit; Pandey, Daya Shankar

2014-09-11

Novel saponification-triggered gelation in an ester-based bis-salen Zn(II) complex (1) is described. Strategic structural modifications induced by NaOH in 1 tune the dipolar-/π-interactions leading to J-aggregation and the creation of an inorganic gel material (IGM), which has been established by photophysical, DFT and rheological studies.

Production of Monodisperse Cerium Oxide Microspheres with Diameters near 100 µm by Internal Gelation Sol-Gel Methods

Energy Technology Data Exchange (ETDEWEB)

Katalenich, Jeffrey A.; Kitchen, Brian B.; Pierson, Bruce

2018-05-01

Internal gelation sol-gel methods have used a variety of sphere forming methods in the past to produce metal oxide microspheres, but typically with poor control over the size uniformity at diameters near 100 µm. This work describes efforts to make and measure internal gelation, sol-gel microspheres with very uniform diameters in the 100 – 200 µm size range using a two-fluid nozzle. A custom apparatus was used to form aqueous droplets of sol-gel feed solutions in silicone oil and heat them to cause gelation of the spheres. Gelled spheres were washed, dried, and sintered prior to mounting on glass slides for optical imaging and analysis. Microsphere diameters and shape factors were determined as a function of silicone oil flow rate in a two-fluid nozzle and the size of a needle dispensing the aqueous sol-gel solution. Nine batches of microspheres were analyzed and had diameters ranging from 65.5 ± 2.4 µm for the smallest needle and fastest silicone oil flow rate to 211 ± 4.7 µm for the largest needle and slowest silicone oil flow rate. Standard deviations for measured diameters were less than 8% for all samples and most were less than 4%. Microspheres had excellent circularity with measured shape factors of 0.9 – 1. However, processing of optical images was complicated by shadow effects in the photoresist layer on glass slides and by overlapping microspheres. Based on calculated flow parameters, microspheres were produced in a simple dripping mode in the two-fluid nozzle. Using flow rates consistent with a simple dripping mode in a two-fluid nozzle configuration allows for very uniform oxide microspheres to be produced using the internal-gelation sol-gel method.

Influence of gamma-irradiation on thermally-induced mesoscopic gelation of degalactosylated xyloglucans

International Nuclear Information System (INIS)

Todaro, S.; Sabatino, M.A.; Walo, M.; Mangione, M.R.; Bulone, D.; Dispenza, C.

2014-01-01

Thermoresponsive degalactosylated xyloglucans have been already proposed as in situ gelling scaffolds for tissue engineering, due to their reversible macroscopic thermal gelation at body temperature and biodegradability. The highly branched, hydroxyl group-rich molecular structure renders xyloglucans interesting raw materials also in the form of micro/nanoparticles for application as nanoscalar drug delivery devices in cosmetic and pharmaceutical formulations. Owing to their natural source, xyloglucans show high average molecular weight, broad molecular weight distribution and poor water solubility, as large and compact aggregates usually form via inter-molecular hydrogen bonding. 60 Co γ-irradiation has been here applied to reduce the molecular weight. The aqueous solutions of irradiated xyloglucan were characterized by dynamic light scattering measurements and gel filtration chromatography. The aggregation kinetics at 37 °C were studied by dynamic light scattering measurements to confirm the temperature-responsive behavior of this polymer even when dispersed in water at low concentration after γ-irradiation. Irradiation dose–molecular properties relationship has been sought. - Highlights: • Influence of γ-irradiation on a partially degalactosylated xyloglucan is investigated. • Molecular weight reduction is observed in the investigated dose range. • Modification of the temperature-induced mesoscopic gelation kinetics is evidenced

Preparation of porous zirconia microspheres by internal gelation method

International Nuclear Information System (INIS)

Pathak, Sachin S.; Pius, I.C.; Bhanushali, R.D.; Rao, T.V. Vittal; Mukerjee, S.K.

2008-01-01

A modified internal gelation process for the preparation of porous zirconia microspheres has been developed. The conventional method has been modified by adding a surfactant in the feed broth. The effects of variation of surfactant concentration, washing techniques and temperature of calcination on the pore volume and the surface area of the microspheres have been studied. The conditions were optimized to obtain porous stable microspheres suitable for various applications. The microspheres were characterized by surface area analysis, pore volume analysis, thermogravimetric analysis and X-ray diffraction. The ion exchange behavior was studied using pH titration

Determination of heat-set gelation capacity of a quinoa protein isolate (Chenopodium quinoa) by dynamic oscillatory rheological analysis.

Science.gov (United States)

Kaspchak, Elaine; Oliveira, Marco Aurelio Schüler de; Simas, Fernanda Fogagnoli; Franco, Célia Regina Cavicchiolo; Silveira, Joana Léa Meira; Mafra, Marcos Rogério; Igarashi-Mafra, Luciana

2017-10-01

This work aimed to study the influence of pH (3.5 and 7.0) and CaCl 2 and MgCl 2 addition on heat-set gelation of a quinoa protein isolate at 10% and 15% (w/w). The protein isolate obtained was composed mainly of 11S globulin as was observed by electrophoresis and mass spectrometry analysis. Heat-set gelation occurred at both pH values studied. Nevertheless, the gels formed at pH 3.5 were more viscoelastic and denser than those formed at pH 7.0, that was coarser and presented syneresis. The CaCl 2 and MgCl 2 addition increased the gel strength during rheological analysis at pH 3.5, possibly due to the formation of fiber-like connections in the gel network. At pH 7.0, the divalent salts resulted in weaker gels formed by agglomerates, suggesting a neutralization of the protein surface charges. The differences in quinoa protein gelation were attributed to solubility, and the flexibility of proteins secondary structure at the pH studied. Copyright © 2017 Elsevier Ltd. All rights reserved.

Investigation of small scale sphere-pac fuel fabrication plant with external gelation process

International Nuclear Information System (INIS)

Maekawa, Kazuhiko; Yoshimura, Tadahiro; Kikuchi, Toshiaki; Hoshino, Yasushi; Munekata, Hideki; Shimizu, Makoto

2005-02-01

In feasibility studies on commercialized FBR cycle system, comprehensive system investigation and properties evaluation for candidate FBR cycle systems have been implemented through view point of safety, economics, environmental burden reduction, non-proliferation resistivity, etc. As part of these studies, an investigation of small scale sphere-pac fuel fabrication plant with external gelation process was conducted. Until last fiscal year, equipment layout in cells and overall layout design of the 200t-HM/y scale fuel fabrication plant were conducted as well as schematical design studies on main equipments in gelation and reagent recovery processes of the plant. System property data concerning economics and environmental burden reduction of fuel fabrication plant was also acquired. In this fiscal year, the processes from vibropacking to fuel assemblies storage were added to the investigation range, and a conceptual design of whole fuel fabrication plant was studied as well as deepening the design study on main equipments. The conceptual design study was mainly conducted for small 50t-HM/y scale plant and a revising investigation was done for 200t-HM/y scale plant. Taking the planed comparative evaluation with pellet fuel fabrication system into account, design of equipments which should be equivalent with pellet system, especially in post-vibropacking processes, were standardized in each system. Based on these design studies, system properties data concerning economics and environmental burden reduction of the plant was also acquired. In comparison with existing design, the cell height was lowered on condition that plug type pneumatic system was adopted and fuel fabrication building was downsized by applying rationalized layout design of pellet system to post-vibropacking processes. Reduction of reagent usage at gelation process and rationalization of sintering and O/M controlling processes etc., are foremost tasks. (author)

The Napoleon Complex: When Shorter Men Take More.

Science.gov (United States)

Knapen, Jill E P; Blaker, Nancy M; Van Vugt, Mark

2018-05-01

Inspired by an evolutionary psychological perspective on the Napoleon complex, we hypothesized that shorter males are more likely to show indirect aggression in resource competitions with taller males. Three studies provide support for our interpretation of the Napoleon complex. Our pilot study shows that men (but not women) keep more resources for themselves when they feel small. When paired with a taller male opponent (Study 1), shorter men keep more resources to themselves in a game in which they have all the power (dictator game) versus a game in which the opponent also has some power (ultimatum game). Furthermore, shorter men are not more likely to show direct, physical aggression toward a taller opponent (Study 2). As predicted by the Napoleon complex, we conclude that (relatively) shorter men show greater behavioral flexibility in securing resources when presented with cues that they are physically less competitive. Theoretical and practical implications are discussed.

Synthesis and characterization of sugar based low molecular weight gelators and the preparation of chiral sulfinamides

Science.gov (United States)

Mangunuru, Hari Prasad Reddy

Low molecular weight gelators (LMWGs) have received considerable attention in the field of chemistry from last few decades. These compounds form self-assembled fibrous networks like micelles, cylindrical, sheets, fibers, layers and so on. The fibrous network entraps the solvent and forms gel, because of the self-assembly phenomenon and their demonstrated potential uses in a variety of areas, ranging from environmental to medicinal applications. Sugars are good starting materials to synthesize the new class of LMWG's, because these are different from some expensive materials, these are natural products. We have synthesized and characterized the LMGS's based on D-glucose and D-glucosamine. D-glucosamine is the versatile starting material to make different peptoids and triazoles. Several series of compounds were synthesized using compounds 1-3 as starting material and studied the gelation behavior all the compounds. We have studied the self-assembling properties of a new class of tripeptoids, synthesized by one-pot Ugi reaction from simple starting materials. Among the focused library of tripeptoids synthesized, we found that several efficient low molecular weight organogelators were obtained for aqueous DMSO and ethanol mixtures. We have also synthesized and characterized a series of monosaccharide triazole derivatives. These compounds were synthesized from N-acetyl glucosamine and D-glucose via a Cu(I) catalyzed azide/alkyne cycloaddition reaction (CuAAc). The compounds have been screened for their gelation properties and several efficient low molecular weight organo/hydro gelators were obtained, among these compounds, five per-acetyl glucosamine derivatives and one peracetyl glucose derivative were able to form gels in water. These new molecules are expected to be useful in drug delivery and tissue engineering.*. Asymmetric synthesis of chiral amines is a challenging in synthetic organic chemistry. The development of new catalysts for asymmetric organic

A comparative study of nitride purity and Am fabrication losses in PuN materials by the powder and internal gelation production routes

Energy Technology Data Exchange (ETDEWEB)

Hedberg, Marcus, E-mail: marhed@chalmers.se; Ekberg, Christian

2016-12-15

Fabrication of plutonium containing fuels through the internal gelation method has mostly been studied in mixed metal systems such as U, Pu or Zr,Pu. In this work production of undiluted PuN has been performed by carbothermal reduction on both oxide powder and Pu microspheres produced by the internal gelation method. Nitride purities reached using the different methods have been studied together with final densities achieved during pellet fabrication as well as losses of ingrown Am during the different production steps. Formation of Pu microspheres was successfully performed using the internal gelation method, although extensive microsphere fracturing occurred during thermal treatment. Final densities of PuN pellets produced by cold pressing and sintering reached 70–80% of theoretical density. Am losses during the carbothermal reduction step was on average about 3.7%. After sintering about 11% of Am was lost in total through the entire production process if sintering in N{sub 2} + 5% H{sub 2} atmosphere while about 50% of the Am in total was lost when using Ar as sintering atmosphere. - Highlights: • Internal gelation Pu based sols was performed. • Nitride formation by carbothermal reduction on Pu microspheres and powders was performed. • Pelletization and sintering of pellets was performed. • Am losses were measured throughout the production steps.

In Situ Gelation-Induced Death of Cancer Cells Based on Proteinosomes.

Science.gov (United States)

Zhou, Yuting; Song, Jianmin; Wang, Lei; Xue, Xuting; Liu, Xiaoman; Xie, Hui; Huang, Xin

2017-08-14

Hydrogels are an excellent type of material that can be utilized as a platform for cell culture. However, when a bulky hydrogel forms on the inside of cancer cells, the result would be different. In this study, we demonstrate a method for in situ gelation inside cancer cells that can efficiently induce cell death. Glutathione-responsive proteinosomes with good biocompatibility were prepared as carriers for sodium alginate to be endocytosed by cancer cells, where the chelation between sodium alginate and free calcium ions in the culture medium occurs during the diffusion process. The uptake of the hydrogel-loaded proteinosomes into the cancer cells, and then the triggered release of hydrogel with concomitant aggregation, was well-confirmed by monitoring the change of the Young's modulus of the cells based on AFM force measurements. Accordingly, when a large amount of hydrogel formed in cells, the cell viability would be inhibited by ∼90% by MTT assay at a concentration of 5.0 μM of hydrogel-loaded proteinosomes after 48 h incubation, which clearly proves the feasibility of the demonstrated method for killing cancer cells. Although more details regarding the mechanism of cell death should be conducted in the near future, such a demonstrated method of in situ gelation inside cells provides another choice for killing cancer cells.

Effects of shorter versus longer storage time of transfused red blood cells in adult ICU patients

DEFF Research Database (Denmark)

Rygård, Sofie L; Jonsson, Andreas B; Madsen, Martin B

2018-01-01

on the effects of shorter versus longer storage time of transfused RBCs on outcomes in ICU patients. METHODS: We conducted a systematic review with meta-analyses and trial sequential analyses (TSA) of randomised clinical trials including adult ICU patients transfused with fresher versus older or standard issue...... blood. RESULTS: We included seven trials with a total of 18,283 randomised ICU patients; two trials of 7504 patients were judged to have low risk of bias. We observed no effects of fresher versus older blood on death (relative risk 1.04, 95% confidence interval (CI) 0.97-1.11; 7349 patients; TSA......-adjusted CI 0.93-1.15), adverse events (1.26, 0.76-2.09; 7332 patients; TSA-adjusted CI 0.16-9.87) or post-transfusion infections (1.07, 0.96-1.20; 7332 patients; TSA-adjusted CI 0.90-1.27). The results were unchanged by including trials with high risk of bias. TSA confirmed the results and the required...

Synthesis and Properties of Gelators Derived from Tetraphenylethylene and Gallic Acid with Aggregation-Induced Emission

Science.gov (United States)

Luo, Miao; Zhou, Xie; Chi, Zhenguo; Ma, Chunping; Zhang, Yi; Liu, Siwei; Xu, Jiarui

2013-09-01

Two novel organogelators (TEG and TAG) based on tetraphenylethylene and 3,4,5-tris(dodecyloxy) benzoic acid were synthesized through ester bond and amido bond linkages, respectively. Compounds TEG and TAG were able to induce gelation in ethanol. Aggregation-induced enhanced emission was observed in these organogelator molecules, with increased fluorescence intensity from the solutions to the gels. The completely thermoreversible gelation occurred due to the aggregation of the organogelators. In the process, a fibrous network was formed by a combination of intermolecular hydrogen bonding, π-π stacking and van der Waals interactions. These phenomena were observed in the xerogels by field-emission scanning electron microscopy and Fourier-transform infrared spectroscopy. The results of differential scanning calorimetry and polarized optical microscopy indicated that compound TAG exhibited stable liquid crystalline phases over a wide temperature range. The linking groups have severe influence on the properties of the organogelators, which was mainly attributed to the hydrogen bonding interaction in compound TAG.

Non-Steroidal Biphenyl Gelators: Correlation of Xerogel Structure with Solid-State Structure and Circular Dichroism Spectroscopy

Directory of Open Access Journals (Sweden)

H. Cristina Geiger

2018-04-01

Full Text Available Because the factors favoring the formation of well-formed single crystals are dissimilar to those conducive to gel formation, few examples of single-crystal structural characterizations of organogelators are found in the literature. A series of biphenyl methyl and ethyl diester derivatives of varying chain length were synthesized and their gelation abilities explored. X-ray diffraction of single crystals of one of the gelators reveals a columnar extended structure. Based on XRD results for xerogels obtained from the reported organogelators, the members of the series are isostructural and so also adopt a columnar superstructure. Scanning electron microscopy (SEM was used for the investigation of the morphology of the xerogels, which display either platelet-like morphologies or more typical entangled twisted ribbon-like aggregates. The gels exhibit chirality, which depends on the sol-gel transition history, as observed by induced circular dichroism (ICD spectroscopy.

Slow-release Permanganate Gel (SRP-G) for Groundwater Remediation: Spreading, Gelation, and Release in Porous and Low-Permeability Media

Science.gov (United States)

Lee, E. S.; Hastings, J.; Kim, Y.

2015-12-01

Dense nonaqueous phase liquids (DNAPLs) like trichloroethylene (TCE) serve as the most common form of groundwater pollution in the world. Pore-plugging by the solid oxidation product MnO2 and limited lateral dispersion of the oxidant are two common problems with existing in-situ chemical oxidation (ISCO) schemes that could be alleviated through the development of a delayed gelation method for oxidant delivery. The objective of the current study was to further develop and optimize slow-release permanganate gel (SRP-G), a solution comprising colloidal silica and KMnO4, as a novel low-cost treatment option for large and dilute TCE plumes in groundwater. Batch tests showed that gelation could be delayed through manipulation of KMnO4 concentration, pH, and silica particle size of the SRP-G solution. In flow-through columns and flow-tanks filled with saturated sands, silica concentration had little effect on the gelation lag stage and release rate, but increasing silica concentration was associated with increasing release duration. When compared to a pure KMnO4 solution, visual observations and [MnO4-] measurements from flow tank tests demonstrated that the SRP-G prolonged the release duration and enhanced lateral spreading of the oxidant.

36 CFR 223.81 - Shorter advertising periods in emergencies.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Shorter advertising periods... OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Advertisement and Bids § 223.81 Shorter advertising periods in emergencies. In emergency situations where prompt...

Gelation of photopolymerized hyaluronic acid grafted with glycidyl methacrylate

International Nuclear Information System (INIS)

Prado, S.S.; Weaver, J.M.; Love, B.J.

2011-01-01

Experiments have tracked the ambient gelation of a series of hydrophilic hyaluronic acid (HA) resins grafted with glycidyl methacrylate (GM) and photopolymerized as a function of dose. The resin mixtures range in GMHA concentration between 0.5 and 1.5% w/w in phosphate buffered saline (PBS). Illuminated at 20 mW/cm 2 , the dynamic viscosity (η(t)) has been tracked and characterized using the Boltzmann log-sigmoidal model. A gelled viscosity of ∼ 10 Pa s was determined at 0.5% w/w which rose to ∼ 50 Pa s at or above 1% w/w. More curing agent marginally increased the gel viscosity at each concentration. Time constants associated with viscosity advancement were shortest at [GMHA] = 1.0%; higher concentrations are attributed with lower quantum efficiency when illuminated. Subsequent frequency sweeps replicated already published work using similar GHMA concentrations in PBS. G' values ranged from 100 to 500 Pa over the formulation range with expected sensitivity to GMHA and curing agent concentration. Overall, the sigmoidal model represented this advancing viscosity data well, and further analysis of the physical significance of these model parameters may help in understanding photopolymerization of this complicated formulation more broadly. Highlights: → The ambient dynamic viscosity of photopolymerized GMHA gels has been measured. → 2 physical parameters and two time constants were extracted from the sigmoidal model. → Higher crosslinker content for a fixed GMHA concentration led to higher gel viscosity. → The time to toggle between the initial and final viscosity ranged between 5 and 10 s. → Dynamic frequency sweep tests on cured gels also revealed G' values between 100 and 500 Pa.

Do shorter wavelengths improve contrast in optical mammography?

International Nuclear Information System (INIS)

Taroni, P; Pifferi, A; Torricelli, A; Spinelli, L; Danesini, G M; Cubeddu, R

2004-01-01

The detection of tumours with time-resolved transmittance imaging relies essentially on blood absorption. Previous theoretical and phantom studies have shown that both contrast and spatial resolution of optical images are affected by the optical properties of the background medium, and high absorption and scattering are generally beneficial. Based on these observations, wavelengths shorter than presently used (680-780 nm) could be profitable for optical mammography. A study was thus performed analysing time-resolved transmittance images at 637, 656, 683 and 785 nm obtained from 26 patients bearing 16 tumours and 15 cysts. The optical contrast proved to increase upon decreasing wavelengths for the detection of cancers in late-gated intensity images, with higher gain in contrast for lesions of smaller size (<1.5 cm diameter). For cysts either a progressive increase or decrease in contrast with wavelength was observed in scattering images

Insights into the mechanical properties of a silicone oil gel with a ‘latent’ gelator, 1-octadecylamine, and CO2 as an ‘activator’

Directory of Open Access Journals (Sweden)

Emiliano Carretti

2010-10-01

Full Text Available A detailed study of the rheological properties of silicone oil gels, made from a low-molecular-mass organic gelator, a combination of 1-octadecylamine (a latent gelator and carbon dioxide (an ‘activating’ molecule, is reported. Information gleaned from the mechanical measurements is used to characterize the gel networks and how they respond to temperature and strain. It is shown, for example, that very precise measurements of the gel-to-sol transitions can be obtained from plots of viscosity versus temperature.

Study of the gelation behaviour of Brazilian waxy crude oils

Energy Technology Data Exchange (ETDEWEB)

Ziglio, C.M.; Sant' Ana, D.F. [Petroleo Brasileiro S.A., Petrobras, Rio de Janeiro (Brazil)

2008-07-01

The precipitation of wax from crude oil results in the formation of a paraffin network which evolves into a gel structure, causing a major operating issue for the petroleum industry. A gelled oil in a pipeline may need a very high re-start pressure that is beyond the capacity of the pump. The gelation of the oil can also develop into a wax deposit on the pipeline wall that restricts the flow of crude oil. Rheometry tests were used in this study to determine the yielding process of wax gels formed by the cooling of Brazilian crude oils. The effect of selected chemical additives on the gel strength was also examined. Dynamic rheology was used to study the oil-gel transition under quiescent conditions. Two rheological methods were used to study the gel yield stress, which is related to the gel strength. In the Creep and Recovery method, a stress was applied to the sample for a short period while the resulting deformation was measured. The stress was then removed to allow the sample to recover the gel structure. The steps of creep and recovery were repeated with an increasing stress value. The yield stress was identified as the minimum stress to cause an irreversible deformation in the sample. The yield stress of the gelled oil was estimated through dynamic measurements. Gel breakdown occurred when the sample was submitted to a critical strain, which is related to the yield stress value. This study showed that the gelation temperature can be reduced considerably by adding small amounts of readily available additives. These additives have an influence on yield stress values. In a cold re-start situation, they can reduce the pump pressure.

1,3:2,4-Dibenzylidene-D-sorbitol (DBS) and its derivatives--efficient, versatile and industrially-relevant low-molecular-weight gelators with over 100 years of history and a bright future.

Science.gov (United States)

Okesola, Babatunde O; Vieira, Vânia M P; Cornwell, Daniel J; Whitelaw, Nicole K; Smith, David K

2015-06-28

Dibenzylidene-D-sorbitol (DBS) has been a well-known low-molecular-weight gelator of organic solvents for over 100 years. As such, it constitutes a very early example of a supramolecular gel--a research field which has recently developed into one of intense interest. The ability of DBS to self-assemble into sample-spanning networks in numerous solvents is predicated upon its 'butterfly-like' structure, whereby the benzylidene groups constitute the 'wings' and the sorbitol backbone the 'body'--the two parts representing the molecular recognition motifs underpinning its gelation mechanism, with the nature of solvent playing a key role in controlling the precise assembly mode. This gelator has found widespread applications in areas as diverse as personal care products and polymer nucleation/clarification, and has considerable potential in applications such as dental composites, energy technology and liquid crystalline materials. Some derivatives of DBS have also been reported which offer the potential to expand the scope and range of applications of this family of gelators and endow the nansocale network with additional functionality. This review aims to explain current trends in DBS research, and provide insight into how by combining a long history of application, with modern methods of derivatisation and analysis, the future for this family of gelators is bright, with an increasing number of high-tech applications, from environmental remediation to tissue engineering, being within reach.

Gelation of Photonic Microdomain Structures Formed in Semi-Dilute Solutions of Ultra-High-Molecular-Weight Polystyrene-b-Polybutadiene with Various Polybutadiene Contents

International Nuclear Information System (INIS)

Okamoto, S; Ito, S; Ando, K; Mouri, M; Ikeda, A; Hasegawa, H; Koshikawa, N

2010-01-01

Well-ordered microdomain structures were obtained in semi-dilute solutions and successfully stabilized by gelation. We used polystyrene-b-polybutadiene (PS-b-PB) diblock copolymer with the weight-averaged molecular weight varying from several hundred thousands to millions g/mol. The solutions had iridescent colors because the domain spacing is on the order of the wavelength of visible light. As the structures are susceptible to distortion by flow or vibration, structural fixation was carried out by gelation. The polybutadiene used has the microstructure of 1,2-linkage and hence the chains can be cross-linkable. The Small-Angle X-ray Scattering and the UV-vis spectroscopic measurements showed that in the case of PS-b-PBs with the PB volume fraction, φ PB , greater than about 50 vol % the microdomain structures were successfully fixed by gelation, while largely distorted in the case of those with φ PB < ca. 50 vol %. The SAXS scattering intensities were quantitatively analyzed by the scattering functions numerically calculated based on the one- and two-dimensional paracrystal theories and on the concentration fluctuation between the polymers and the solvent molecules.

Proton triggered circularly polarized luminescence in orthogonal- and co-assemblies of chiral gelators with achiral perylene bisimide.

Science.gov (United States)

Han, Dongxue; Han, Jianlei; Huo, Shengwei; Qu, Zuoming; Jiao, Tifeng; Liu, Minghua; Duan, Pengfei

2018-05-29

The orthogonal- or co-assembly of achiral perylene bisimide (PBI) with chiral gelators can be regulated by solvents. While the coassembly leads to the formation of chiroptical nanofibers through chirality transfer, the orthogonal assemblies could not. Moreover, protonation on the coassembled nanofibers could light up the circularly polarized luminescence (CPL).

Acid-Induced Cold Gelation of Globular Proteins: Effects of Protein Aggregate Characteristics and Disulfide Bonding on Rheological Properties

NARCIS (Netherlands)

Alting, A.C.; Weijers, M.; Hoog, E.H.A. de; Pijpekamp, A.M. van de; Cohen Stuart, M.A.; Hamer, R.J.; Kruif, C.G. de; Visschers, R.W.

2004-01-01

The process of cold gelation of ovalbumin and the properties of the resulting cold-set gels were compared to those of whey protein isolate. Under the chosen heating conditions, most protein was organized in aggregates. For both protein preparations, the aggregates consisted of covalently linked

Bis(PheOH) maleic acid amide-fumaric acid amide photoizomerization induces microsphere-to-gel fiber morphological transition: the photoinduced gelation system.

Science.gov (United States)

Frkanec, Leo; Jokić, Milan; Makarević, Janja; Wolsperger, Kristina; Zinić, Mladen

2002-08-21

The photoinduced gelation system based on 1 (non-gelling) to 2 (gelling) molecular photoisomerization in water results by microspheres (1) to gel fibers (2) transformation at the supramolecular level.

Representativeness of shorter measurement sessions in long-term indoor air monitoring.

Science.gov (United States)

Maciejewska, M; Szczurek, A

2015-02-01

Indoor air quality (IAQ) considerably influences health, comfort and the overall performance of people who spend most of their lives in confined spaces. For this reason, there is a strong need to develop methods for IAQ assessment. The fundamental issue in the quantitative determination of IAQ is the duration of measurements. Its inadequate choice may result in providing incorrect information and this potentially leads to wrong conclusions. The most complete information may be acquired through long-term monitoring. However it is typically perceived as impractical due to time and cost load. The aim of this study was to determine whether long-term monitoring can be adequately represented by a shorter measurement session. There were considered three measurable quantities: temperature, relative humidity and carbon dioxide concentration. They are commonly recognized as indicatives for IAQ and may be readily monitored. Scaled Kullback-Leibler divergence, also called relative entropy, was applied as a measure of data representativeness. We considered long-term monitoring in a range from 1 to 9 months. Based on our work, the representative data on CO2 concentration may be acquired while performing measurements during 20% of time dedicated to long-term monitoring. In the case of temperature and relative humidity the respective time demand was 50% of long-term monitoring. From our results, in indoor air monitoring strategies, there could be considered shorter measurement sessions, while still collecting data which are representative for long-term monitoring.

Enzymatic gelation of sugar beet pectin in food products

DEFF Research Database (Denmark)

Bergsøe, Merete Norsker; Jensen, Mette; Adler-Nissen, Jens

2000-01-01

Sugar beet pectin is a food ingredient with specific functional properties. It may form gels by an oxidative cross-linking of ferulic acid. In the present study, the gel forming properties of three oxidative enzymes were examined in different food relevant conditions. The enzymes chosen were two...... laccases and one peroxidase. The textural properties of the produced gels were measured on a texture analyser. The influence of sugar, salt and protein were analysed. Finally, the enzymatic gelation was studied in three food products with added sugar beet pectin. These were black currant juice, milk...... and chopped heat-treated meat emulsion. The addition of salt resulted in softer, less stiff and chewy, and less adhesive gels. Generally speaking, sugar addition increased the hardness but at high concentration the gels were very brittle. However, Young's modulus was lower in gels containing sugar than...

The crucial effect of early-stage gelation on the mechanical properties of cement hydrates

Science.gov (United States)

Ioannidou, Katerina; Kanduč, Matej; Li, Lunna; Frenkel, Daan; Dobnikar, Jure; Del Gado, Emanuela

2016-07-01

Gelation and densification of calcium-silicate-hydrate take place during cement hydration. Both processes are crucial for the development of cement strength, and for the long-term evolution of concrete structures. However, the physicochemical environment evolves during cement formation, making it difficult to disentangle what factors are crucial for the mechanical properties. Here we use Monte Carlo and Molecular Dynamics simulations to study a coarse-grained model of cement formation, and investigate the equilibrium and arrested states. We can correlate the various structures with the time evolution of the interactions between the nano-hydrates during the preparation of cement. The novel emerging picture is that the changes of the physicochemical environment, which dictate the evolution of the effective interactions, specifically favour the early gel formation and its continuous densification. Our observations help us understand how cement attains its unique strength and may help in the rational design of the properties of cement and related materials.

Gels with exceptional thermal stability formed by bis(amino acid) oxalamide gelators and solvents of low polarity.

Science.gov (United States)

Makarević, Janja; Jokić, Milan; Frkanec, Leo; Katalenić, Darinka; Zinić, Mladen

2002-10-07

Some bis (amino acid) oxalamide gelators form common thermo-reversible gels with various organic solvents but also gels of exceptional thermal stability with some solvents of medium and low polarity; the latter gels can be heated up to 50 degrees C higher temperatures than the bp of the solvent without apparent gel-to-sol transition.

Supra-dendron Gelator Based on Azobenzene-Cyclodextrin Host-Guest Interactions: Photoswitched Optical and Chiroptical Reversibility.

Science.gov (United States)

Xie, Fan; Ouyang, Guanghui; Qin, Long; Liu, Minghua

2016-12-12

A novel amphiphilic dendron (AZOC 8 GAc) with three l-glutamic acid units and an azobenzene moiety covalently linked by an alkyl spacer has been designed. The compound formed hydrogels with water at very low concentration and self-assembled into chiral-twist structures. The gel showed a reversible macroscopic volume phase transition in response to pH variations and photo-irradiation. During the photo-triggered changes, although the gel showed complete reversibility in its optical absorptions, only an incomplete chiroptical property change was achieved. On the other hand, the dendron could form a 1:1 inclusion complex through a host-guest interaction with α-cyclodextrin (α-CD), designated as supra-dendron gelator AZOC 8 GAc/α-CD. The supra-dendron showed similar gelation behavior to that of AZOC 8 GAc, but with enhanced photoisomerization-transition efficiency and chiroptical switching capacity, which was completely reversible in terms of both optical and chiroptical performances. The self-assembly of the supra-dendron is a hierarchical or multi-supramolecular self-assembling process. This work has clearly illustrated that the hierarchical and multi-supramolecular self-assembling system endows the supramolecular nanostructures or materials with superior reversible optical and chiroptical switching. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of gelation of inner dispersed phase on stability of (w1/o/w2) multiple emulsions

NARCIS (Netherlands)

Oppermann, A.K.L.; Renssen, M.; Schuch, A.; Stieger, M.A.; Scholten, E.

2015-01-01

The use of water-in-oil-in-water (w1/o/w2) multiple emulsions offers a method for the reduction of oil in foods. In this study we investigated the influence of osmotic pressure tailoring and gelation of the inner dispersed w1 water droplets on the stability and yield of multiple emulsions. Yield is

Impact of preacidification of milk and fermentation time on the properties of yogurt.

Science.gov (United States)

Peng, Y; Horne, D S; Lucey, J A

2009-07-01

Casein interactions play an important role in the textural properties of yogurt. The objective of this study was to investigate how the concentration of insoluble calcium phosphate (CCP) that is associated with casein particles and the length of fermentation time influence properties of yogurt gels. A central composite experimental design was used. The initial milk pH was varied by preacidification with glucono-delta-lactone (GDL), and fermentation time (time to reach pH 4.6 from the initial pH) was altered by varying the inoculum level. We hypothesized that by varying the initial milk pH value, the amount of CCP would be modified and that by varying the length of the fermentation time we would influence the rate and extent of solubilization of CCP during any subsequent gelation process. We believe that both of these factors could influence casein interactions and thereby alter gel properties. Milks were preacidified to pH values from 6.55 to 5.65 at 40 degrees C using GDL and equilibrated for 4 h before inoculation. Fermentation time was varied from 250 to 500 min by adding various amounts of culture at 40 degrees C. Gelation properties were monitored using dynamic oscillatory rheology, and microstructure was studied using fluorescence microscopy. Whey separation and permeability were analyzed at pH 4.6. The preacidification pH value significantly affected the solubilization of CCP. Storage modulus values at pH 4.6 were positively influenced by the preacidification pH value and negatively affected by fermentation time. The value for the loss tangent maximum during gelation was positively affected by the preacidification pH value. Fermentation time positively affected whey separation and significantly influenced the rate of CCP dissolution during fermentation, as CCP dissolution was a slow process. Longer fermentation times resulted in greater loss of CCP at the pH of gelation. At the end of fermentation (pH approximately 4.6), virtually all CCP was dissolved

Gelation in a model 1-component system with adhesive hard-sphere interactions

Science.gov (United States)

Kim, Jung Min; Eberle, Aaron; Fang, Jun; Wagner, Norman

2012-02-01

Colloidal dispersions can undergo a dynamical arrest of the disperse phase leading to a system with solid-like properties when either the volume fraction or the interparticle potential is varied. Systems that contain low to moderate particulate concentrations form gels whereas higher concentrations lead to glassy states in which caging by nearest neighbors can be a significant contributor to the arrested long-time dynamics. Colloid polymer mixtures have been the prevalent model system for studying the effect of attraction, where attractions are entropically driven by depletion effects, in which gelation has been shown to be a result of phase separation [1]. Using the model 1-component octadecyl coated silica nanoparticle system, Eberle et al. [2] found the gel-line to intersect the spinodal to the left of the critical point, and at higher concentrations extended toward the mode coupling theory attractive driven glass line. . We continue this study by varying the particle diameter and find quantitative differences which we explain by gravity. 1. Lu, P.J., et al., Nature, 2008. 453(7194): p. 499-504.2. Eberle, A.P.R., N.J. Wagner, and R. Castaneda-Priego, Physical Review Letters, 2011. 106(10).

Thermal gelation and tissue adhesion of biomimetic hydrogels

International Nuclear Information System (INIS)

Burke, Sean A; Ritter-Jones, Marsha; Lee, Bruce P; Messersmith, Phillip B

2007-01-01

Marine and freshwater mussels are notorious foulers of natural and manmade surfaces, secreting specialized protein adhesives for rapid and durable attachment to wet substrates. Given the strong and water-resistant nature of mussel adhesive proteins, significant potential exists for mimicking their adhesive characteristics in bioinspired synthetic polymer materials. An important component of these proteins is L-3,4-dihydroxylphenylalanine (DOPA), an amino acid believed to contribute to mussel glue solidification through oxidation and crosslinking reactions. Synthetic polymers containing DOPA residues have previously been shown to crosslink into hydrogels upon the introduction of oxidizing reagents. Here we introduce a strategy for stimuli responsive gel formation of mussel adhesive protein mimetic polymers. Lipid vesicles with a bilayer melting transition of 37 0 C were designed from a mixture of dipalmitoyl and dimyristoyl phosphatidylcholines and exploited for the release of a sequestered oxidizing reagent upon heating from ambient to physiologic temperature. Colorimetric studies indicated that sodium-periodate-loaded liposomes released their cargo at the phase transition temperature, and when used in conjunction with a DOPA-functionalized poly(ethylene glycol) polymer gave rise to rapid solidification of a crosslinked polymer hydrogel. The tissue adhesive properties of this biomimetic system were determined by in situ thermal gelation of liposome/polymer hydrogel between two porcine dermal tissue surfaces. Bond strength measurements showed that the bond formed by the adhesive hydrogel (mean = 35.1 kPa, SD = 12.5 kPa, n = 11) was several times stronger than a fibrin glue control tested under the same conditions. The results suggest a possible use of this biomimetic strategy for repair of soft tissues

High Numbers of Stromal Cancer-Associated Fibroblasts Are Associated With a Shorter Survival Time in Cats With Oral Squamous Cell Carcinoma.

Science.gov (United States)

Klobukowska, H J; Munday, J S

2016-11-01

Cancer-associated fibroblasts (CAFs) are fibroblastic cells that express α-smooth muscle actin and have been identified in the stroma of numerous epithelial tumors. The presence of CAFs within the tumor stroma has been associated with a poorer prognosis in some human cancers, including oral squamous cell carcinomas (SCCs). Cats frequently develop oral SCCs, and although these are generally highly aggressive neoplasms, there is currently a lack of prognostic markers for these tumors. The authors investigated the prognostic value of the presence of CAFs within the stroma of oral SCC biopsy specimens from 47 cats. In addition, several epidemiologic, clinical, and histologic variables were also assessed for prognostic significance. A CAF-positive stroma was identified in 35 of 47 SCCs (74.5%), and the median survival time (ST) of cats with CAF-positive SCCs (35 days) was significantly shorter than that of cats with CAF-negative SCCs (48.5 days) (P = .031). ST was also associated with the location of the primary tumor (P = .0018): the median ST for oropharyngeal SCCs (179 days) was significantly longer than for maxillary (43.5 days; P = .047), mandibular (42 days; P = .022), and sublingual SCCs (22.5 days; P = .0005). The median ST of sublingual SCCs was also shorter compared with maxillary SCCs (P = .0017). Furthermore, a significant association was identified between site and the presence of stromal CAFs (P = .025). On the basis of this retrospective study, evaluating the tumor stroma for CAFs in feline oral SCC biopsy specimens may be of potential prognostic value. © The Author(s) 2016.

Experimental Methodology for Determining Optimum Process Parameters for Production of Hydrous Metal Oxides by Internal Gelation

Energy Technology Data Exchange (ETDEWEB)

Collins, J.L.

2005-10-28

The objective of this report is to describe a simple but very useful experimental methodology that was used to determine optimum process parameters for preparing several hydrous metal-oxide gel spheres by the internal gelation process. The method is inexpensive and very effective in collection of key gel-forming data that are needed to prepare the hydrous metal-oxide microspheres of the best quality for a number of elements.

Shorter time since inflammatory bowel disease diagnosis in children is associated with lower mental health in parents.

Science.gov (United States)

Werner, H; Braegger, Cp; Buehr, P; Koller, R; Nydegger, A; Spalinger, J; Heyland, K; Schibli, S; Landolt, Ma

2015-01-01

This study assessed the mental health of parents of children with inflammatory bowel disease (IBD), compared their mental health with age-matched and gender-matched references and examined parental and child predictors for mental health problems. A total of 125 mothers and 106 fathers of 125 children with active and inactive IBD from the Swiss IBD multicentre cohort study were included. Parental mental health was assessed by the Symptom Checklist 27 and child behaviour problems by the Strengths and Difficulties Questionnaire. Child medical data were extracted from hospital records. While the mothers reported lower mental health, the fathers' mental health was similar, or even better, than in age-matched and gender-matched community controls. In both parents, shorter time since the child's diagnosis was associated with poorer mental health. In addition, the presence of their own IBD diagnosis and child behaviour problems predicted maternal mental health problems. Parents of children with IBD may need professional support when their child is diagnosed, to mitigate distress. This, in turn, may help the child to adjust better to IBD. Particular attention should be paid to mothers who have their own IBD diagnosis and whose children display behaviour problems. ©2014 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Physical properties and compatibility with dental stones of current alginate impression materials.

Science.gov (United States)

Murata, H; Kawamura, M; Hamada, T; Chimori, H; Nikawa, H

2004-11-01

This study examined physical properties and compatibility with dental stones of two types of alginate impression materials. Five powder-type alginate impression materials (Alginoplast EM, Aroma Fine, Algiace Z, Coe Alginate, Jeltrate Plus) and a paste-type alginate impression material (Tokuso AP-1) were used. The dynamic viscosity immediately after mixing was measured by means of a controlled-stress rheometer. The gelation times were determined according to Japanese Industrial Standards (JIS) T6505, and recovery from deformation, strain in compression and compressive strength were determined according to the International Organization for Standardization (ISO) specification 1563. Detail reproduction and surface roughness of type III dental stones (New Plastone, New Sunstone) and a type IV dental stone (Die Stone) were evaluated using a ruled test block as specified in the ISO specification 1563 and a profilometer, respectively. The alginate impression materials evaluated in this study were all in compliance with the ISO specification 1563 and JIS T6505. The alginate impression materials had similar mechanical properties after gelation, whilst a wide range of dynamic viscosity immediately after being mixed, gelation times and compatibility with dental stones were found among the materials. The paste-type material had a higher dynamic viscosity and a shorter gelation time than the powder-type materials. The best surface quality was obtained with the paste-type material/type III dental stone cast combinations. The materials should be selected in consideration of initial flow, setting characteristics and compatibility with dental stones. The results suggested that a paste-type material would better meet the requirements of an alginate impression material.

Properties of bioadhesive ketoprofen liquid suppositories: preparation, determination of gelation temperature, viscosity studies and evaluation of mechanical properties using texture analyzer by 4 × 4 factorial design.

Science.gov (United States)

Ozgüney, Işık; Kardhiqi, Anita

2014-12-01

Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation temperature, viscosity and mechanical properties. Bioadhesive liquid suppositories were prepared by the cold method using poloxamer 407 (P 407), Poloxamer 188 (P 188) and various amounts of different bioadhesive polymers. Their gelation temperatures, viscosity values and mechanical properties were determined using texture analyzer by 4 × 4 factorial design. It was seen that in presence of KP, gelation temperature of formulation P 407/P 188 (4/20%) significantly decreased from 64 to 37.1 °C. It is to be noted that addition of increasing concentrations of bioadhesive polymers lowered gelation temperature and its decrease was highest with addition of Carbopol 934 P (C). Results of texture profile analysis (TPA) showed that formulations containing C have significantly higher hardness and adhesiveness values than other bioadhesive formulations. According to TPA, gel structure of liquid suppository formulation F5, containing P 407/P 188/KP/C (4/20/2.5/0.8%), exhibited the greatest hardness, compressibilty, adhesiveness and besides greatest viscosity. According to mechanical properties and viscosity values, it was concluded that F5 could be a promising formulation.

Washing of Uranium Gel Resulted from Gelation Using Ammonia

International Nuclear Information System (INIS)

Nurwijayadi; Bangun-Wasito; Sukarsono; Endang-Nawangsih

2000-01-01

Washing of uranium gel resulted from gelation using ammonia underconcentration of 1, 2.5, 3, 4 and 5 % has been carried out. The sol wasprepared by reacting uranyl nitrate, urea and HMTA at 5 o C. The resulted solwas dropped into a column containing paraffin oil at temperature of 95 o C.The resulted gel color was orange. It was simmered in a 2.5 % ammoniasolution for 24 hours. After that, the gel was washed in an ammonia solutionunder a concentration variation. The best washing process occurred at ammoniaconcentration of 2.5 % with most absorbed ion nitrate, i.e. 292.2 ppm. Theresulted true density using N 2 was about 8.3 - 8.6 g/ml, specific surfacearea using multi point BET was about 1.5 - 3.1 m 2 /g, average pore radius was22.27 -41.22 A and total pore volume was 3.55 x 10 -3 cc/g. (author)

Effect of N-Ethylmaleimide as a Blocker of Disulfide Crosslinks Formation on the Alkali-Cold Gelation of Whey Proteins.

Directory of Open Access Journals (Sweden)

Zhao Lei

Full Text Available N-ethylmaleimide (NEM was used to verify that no new disulfide crosslinks were formed during the fascinating rheology of the alkali cold-gelation of whey proteins, which show Sol-Gel-Sol transitions with time at pH > 11.5. These dynamic transitions involve the formation and subsequent destruction of non-covalent interactions between soluble whey aggregates. Therefore, incubation of aggregates with NEM was expected not to affect much the rheology. Experiments show that very little additions of NEM, such as 0.5 mol per mol of protein, delayed and significantly strengthened the metastable gels formed. Interactions between whey protein aggregates were surprisingly enhanced during incubation with NEM as inferred from oscillatory rheometry at different protein concentrations, dynamic swelling, Trp fluorescence and SDS-PAGE measurements.

Effect of N-Ethylmaleimide as a Blocker of Disulfide Crosslinks Formation on the Alkali-Cold Gelation of Whey Proteins

Science.gov (United States)

Lei, Zhao; Chen, Xiao Dong

2016-01-01

N-ethylmaleimide (NEM) was used to verify that no new disulfide crosslinks were formed during the fascinating rheology of the alkali cold-gelation of whey proteins, which show Sol-Gel-Sol transitions with time at pH > 11.5. These dynamic transitions involve the formation and subsequent destruction of non-covalent interactions between soluble whey aggregates. Therefore, incubation of aggregates with NEM was expected not to affect much the rheology. Experiments show that very little additions of NEM, such as 0.5 mol per mol of protein, delayed and significantly strengthened the metastable gels formed. Interactions between whey protein aggregates were surprisingly enhanced during incubation with NEM as inferred from oscillatory rheometry at different protein concentrations, dynamic swelling, Trp fluorescence and SDS-PAGE measurements. PMID:27732644

Intermediate Compound Preparation Using Modified External Gelation Method and Thermal Treatment Equipment Development for UCO Kernel

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kyung Chai; Eom, Sung Ho; Kim, Yeon Ku; Yeo, Seoung Hwan; Kim, Young Min; Cho, Moon Sung [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

VHTR (Very High Temperature Gas Reactor) fuel technology is being actively developed in the US, China, Japan, and Korea for a Next Generation Nuclear Plant (NGNP). The concept of fuel of a VHTR is based on a sphere kernel of UO{sub 2} or UCO, with multiple coating layers to create a gas-tight particle. The fuel particle of a VHTR in the US is based on microspheres containing a UCO, mixture compound of UO{sub 2} and UC{sub 2} , coated particles with multi carbon layers and a SiC layer. This was first prepared through an internal gelation method at ORNL in the late 1970s. This study presents; (1) C-ADU gel particles were prepared using a modified sol-gel process. The particles fabricated with a KAERI-established gelation and AWD processes showed good sphericity and no cracks were found on the surfaces. (2) High temperature rotating furnace was designed and fabricated in our laboratory, and the maximum operation temperature was about 2000℃. The furnace was equipped with Mo crucible and graphite heating system, and now it is being operated. (3) Well-prepared C-ADU gel particles were converted into UCO compounds using high temperature rotating furnace, and the physical properties of the UCO kernels will be analyzed.

Effect of extraction pH on heat-induced aggregation, gelation and microstructure of protein isolate from quinoa (Chenopodium quinoa Willd)

NARCIS (Netherlands)

Ruiz, Geraldine Avila; Xiao, Wukai; Boekel, van Tiny; Minor, Marcel; Stieger, Markus

2016-01-01

The aim of this study was to determine the influence of extraction pH on heat-induced aggregation, gelation and microstructure of suspensions of protein isolates extracted from quinoa (Chenopodium quinoa Willd). Quinoa seed protein was extracted by alkaline treatment at various pH values (pH 8

Studying the gelation process of titanium isopropoxide by method of positron annihilation spectroscopy; Studium procesu gelacie izopropoxidu titaniciteho metodou pozitronovej anihilacnej spektroskopie

Energy Technology Data Exchange (ETDEWEB)

Nyblova, D.; Jesenak, K. [Univerzita Komenskeho, Prirodovedecka fakulta, Katedra anorganickej chemie, 84215 Bratislava (Slovakia); Sausa, O. [Slovenska akademia vied, Fyzikalny ustav, 84511 Bratislava (Slovakia)

2013-04-16

Thank to its harmlessness titanium dioxide is widely utilized material. One of the new areas to use titanium dioxide is photocatalysis, which could be the way to e.g. remove organic pollutants from water or air. Titanium dioxide based gels are perspective form of TiO{sub 2} for photocatalysis because of their high porosity thus high surface area. Positron annihilation spectroscopy is a physical method to study microporous structure and electron energy distribution in materials. We studied gelation process of titanium isopropoxide in ethanol with various amount of water catalyzed by hydrochloric acid by positron annihilation lifetime spectroscopy and doppler broadening of annihilation line in this work. Positronium is weakly formed in TiO{sub 2} in general wherefore it cannot be monitored by positron annihilation spectroscopy very well. Gelation process can be monitored through pick-off annihilation of ortho-positronium. (authors)

Preparation and characterization of monodisperse microcapsules with alginate and bentonite via external gelation technique encapsulating Pseudomonas putida Rs-198.

Science.gov (United States)

Li, Xuan; Wu, Zhansheng; He, Yanhui; Ye, Bang-Ce; Wang, Jun

2017-10-01

This paper evaluated the external gelation technique for preparing microcapsules. The microcapsules were consisted of Pseudomonas putida Rs-198 (Rs-198) core and sodium alginate (NaAlg)-bentonite (Bent) shell. Different emulsification rotation speeds and core/shell ratios were used to prepare the microcapsules of each formulation. The near-spherical microcapsules were monodisperse with a mean diameter of 25-100 μm and wrinkled surfaces. Fourier transform infrared spectrophotometry (FTIR) and thermogravimetric analysis (TGA) revealed the physical mixture of the wall material and the superior thermal stability of the microcapsules. Percentage yield, water content, and encapsulation efficiency were evaluated and correlated with the changes in emulsification rotation speed and core/shell ratio. In vitro release experiments demonstrated that 60% of the bacteria were released from the NaAlg-Bent microcapsules within three days. Considerably better survival was observed for encapsulated cells compared to free cells, especially in pH 4.0 and 10.0. In summary, the desired properties of microcapsules can be obtained by external gelation technique and the microcapsules on the bacteria had a good protective effect.

Influent of Carbonization of Sol Solution at the External Gelation Process on the Quality of Uranium Oxide Kernel

International Nuclear Information System (INIS)

Damunir; Sukarsono

2007-01-01

The influent of carbonization of sol solution at the external gelation process on the quality of uranium oxide kernel was done. Variables observed are the influent of carbon, temperature and time of reduction process of U 3 O 8 kernel resulted from carbonization of sol solution. First of all, uranyl nitrate was reacted with 1 M NH 4 OH solution, producing the colloid of UO 3 . Then by mixing and heating up to the temperature of 60-80 °C, the colloid solution was reacted with PVA, mono sorbitol oleate and paraffin producing of uranium-PVA sol. Then sol solution was carbonized with carbon black of mol ratio of carbon to uranium =2.32-6.62, produce of carbide gel. Gel then washed, dried and calcined at 800 °C for 4 hours to produce of U 3 O 8 kernel containing carbon. Then the kernel was reduced by H 2 gas in the medium of N 2 gas at 500-800 °C, 50 mmHg pressure for 3 hours. The process was repeated at 700 °C, 50 mmHg pressure for 1-4 hours. The characterization of chemical properties of the gel grains and uranium oxide kernel using FTIR covering the analysis of absorption band of infra red spectrum of UO 3 , C-OH, NH 3 , C-C, C-H and OH functional group. The physical properties of uranium oxide covering specific surface area, void volume, mean diameter using surface area meter Nova-1000 and as N 2 gas an absorbent. And O/U ratio of uranium dioxide kernel by gravimetry method. The result of experiment showed that carbonization of sol solution at the external gelation process give influencing the quality of uranium oxide kernel. (author)

Microspheres Prepared by Internal Gelation for Actinide Co-Conversion - Influence of Organic Precursors in Initial Solution on Structure during Thermal Treatment

International Nuclear Information System (INIS)

Benay, G.; Modolo, G.; Robisson, A.C.; Grandjean, S.

2008-01-01

The fabrication of fuels or targets for transmutation of minor actinides requires a dust-free process. Such a requirement can be fulfilled by sol-gel methods, which allow the production of microsphere precursors. Internal gelation, one of these methods, was studied at Cea Marcoule and FZ (Forschungszentrum Juelich Germany). A study of the parameters involved in internal gelation (essentially the quantity of organic additives urea and hexa-methylene-tetramine (HMTA) present in the initial solution) was performed. Afterwards, the effects of these parameters on the structural evolution of the microspheres during thermal treatment were studied. It was observed that the structure and density of the microspheres are heavily dependant of the quantity of organic precursors present in the initial solution. Urea in particular has been found to bring porosity to the material, in addition to its catalytic effect on HMTA decomposition. The elimination of these organic compounds is however a major issue which causes the formation of cracks on the microspheres if no optimization is performed. (authors)

Hereditary angioedema attacks resolve faster and are shorter after early icatibant treatment.

Directory of Open Access Journals (Sweden)

Marcus Maurer

Full Text Available BACKGROUND: Attacks of hereditary angioedema (HAE are unpredictable and, if affecting the upper airway, can be lethal. Icatibant is used for physician- or patient self-administered symptomatic treatment of HAE attacks in adults. Its mode of action includes disruption of the bradykinin pathway via blockade of the bradykinin B(2 receptor. Early treatment is believed to shorten attack duration and prevent severe outcomes; however, evidence to support these benefits is lacking. OBJECTIVE: To examine the impact of timing of icatibant administration on the duration and resolution of HAE type I and II attacks. METHODS: The Icatibant Outcome Survey is an international, prospective, observational study for patients treated with icatibant. Data on timings and outcomes of icatibant treatment for HAE attacks were collected between July 2009-February 2012. A mixed-model of repeated measures was performed for 426 attacks in 136 HAE type I and II patients. RESULTS: Attack duration was significantly shorter in patients treated <1 hour of attack onset compared with those treated ≥ 1 hour (6.1 hours versus 16.8 hours [p<0.001]. Similar significant effects were observed for <2 hours versus ≥ 2 hours (7.2 hours versus 20.2 hours [p<0.001] and <5 hours versus ≥ 5 hours (8.0 hours versus 23.5 hours [p<0.001]. Treatment within 1 hour of attack onset also significantly reduced time to attack resolution (5.8 hours versus 8.8 hours [p<0.05]. Self-administrators were more likely to treat early and experience shorter attacks than those treated by a healthcare professional. CONCLUSION: Early blockade of the bradykinin B(2 receptor with icatibant, particularly within the first hour of attack onset, significantly reduced attack duration and time to attack resolution.

Influence of THFA on the surface area and porosity of U3O8 kernel of produced by external gelation process

International Nuclear Information System (INIS)

Susilowati, Sri Rinanti; Triyono; Nawangsih, Endang; Widiyati, Sri

2013-01-01

The research of the influence of THFA on the surface area and porosity of U 3 O 8 by kernel external gelation results has done. U 3 0 8 kernel made by external gelation process using uranyl nitrate solution with various concentration of THFA in sol solution. UN solution preparation by dissolving UO 3 powder into 7N HNO 3 at a temperature of 60 °C with a certain amount and volume, resulting in a solution of uranyl nitrate with high uranium concentrations but low acidity. Preparation of sol begins by dissolving 1.8 9 of polyvinyl alcohol in demineralized water at 70 °C, the volume varied tetrahydrofurfural alcohol, then added a solution of UN stirring constantly until homogeneous. Sol solution was then dripped in 7N ammonia in the medium gelation column. Gel ADU diaging in ammonia solution 7N for 30 minutes, then washed with ammonia 2.5% and n propanol. ADU gel diameter was measured using calipers. ADU silenced gel at room temperature 48 hours and then dried in an oven 100 °C at a rate of temperature rising 5°C/minutes. After drying, the gel ADU calcined at 600°C with an increase rate of 5°C/minutes for 2 hours. Kernel density U 3 O 8 then analyzed, surface area, mean pore radius and total pore volume. U 3 O 8 best kernel at 2.5% THFA concentration conditions, because it has a high density is 7.877 g/mL and extensive porosity and lower surface area is 5,180 % and 4,898 m 2 /g. (author)

Spindle assembly checkpoint protein expression correlates with cellular proliferation and shorter time to recurrence in ovarian cancer.

LENUS (Irish Health Repository)

McGrogan, Barbara

2014-07-01

Ovarian carcinoma (OC) is the most lethal of the gynecological malignancies, often presenting at an advanced stage. Treatment is hampered by high levels of drug resistance. The taxanes are microtubule stabilizing agents, used as first-line agents in the treatment of OC that exert their apoptotic effects through the spindle assembly checkpoint. BUB1-related protein kinase (BUBR1) and mitotic arrest deficient 2 (MAD2), essential spindle assembly checkpoint components, play a key role in response to taxanes. BUBR1, MAD2, and Ki-67 were assessed on an OC tissue microarray platform representing 72 OC tumors of varying histologic subtypes. Sixty-one of these patients received paclitaxel and platinum agents combined; 11 received platinum alone. Overall survival was available for all 72 patients, whereas recurrence-free survival (RFS) was available for 66 patients. Increased BUBR1 expression was seen in serous carcinomas, compared with other histologies (P = .03). Increased BUBR1 was significantly associated with tumors of advanced stage (P = .05). Increased MAD2 and BUBR1 expression also correlated with increased cellular proliferation (P < .0002 and P = .02, respectively). Reduced MAD2 nuclear intensity was associated with a shorter RFS (P = .03), in ovarian tumors of differing histologic subtype (n = 66). In this subgroup, for those women who received paclitaxel and platinum agents combined (n = 57), reduced MAD2 intensity also identified women with a shorter RFS (P < .007). For the entire cohort of patients, irrespective of histologic subtype or treatment, MAD2 nuclear intensity retained independent significance in a multivariate model, with tumors showing reduced nuclear MAD2 intensity identifying patients with a poorer RFS (P = .05).

Extending 3D near-cloud corrections from shorter to longer wavelengths

International Nuclear Information System (INIS)

Marshak, Alexander; Evans, K. Frank; Várnai, Tamás; Wen, Guoyong

2014-01-01

Satellite observations have shown a positive correlation between cloud amount and aerosol optical thickness (AOT) that can be explained by the humidification of aerosols near clouds, and/or by cloud contamination by sub-pixel size clouds and the cloud adjacency effect. The last effect may substantially increase reflected radiation in cloud-free columns, leading to overestimates in the retrieved AOT. For clear-sky areas near boundary layer clouds the main contribution to the enhancement of clear sky reflectance at shorter wavelengths comes from the radiation scattered into clear areas by clouds and then scattered to the sensor by air molecules. Because of the wavelength dependence of air molecule scattering, this process leads to a larger reflectance increase at shorter wavelengths, and can be corrected using a simple two-layer model [18]. However, correcting only for molecular scattering skews spectral properties of the retrieved AOT. Kassianov and Ovtchinnikov [9] proposed a technique that uses spectral reflectance ratios to retrieve AOT in the vicinity of clouds; they assumed that the cloud adjacency effect influences the spectral ratio between reflectances at two wavelengths less than it influences the reflectances themselves. This paper combines the two approaches: It assumes that the 3D correction for the shortest wavelength is known with some uncertainties, and then it estimates the 3D correction for longer wavelengths using a modified ratio method. The new approach is tested with 3D radiances simulated for 26 cumulus fields from Large-Eddy Simulations, supplemented with 40 aerosol profiles. The results showed that (i) for a variety of cumulus cloud scenes and aerosol profiles over ocean the 3D correction due to cloud adjacency effect can be extended from shorter to longer wavelengths and (ii) the 3D corrections for longer wavelengths are not very sensitive to unbiased random uncertainties in the 3D corrections at shorter wavelengths. - Highlights: �

Insights into gelation kinetics and gel front migration in cation-induced polysaccharide hydrogels by viscoelastic and turbidity measurements: Effect of the nature of divalent cations.

Science.gov (United States)

Huynh, Uyen T D; Chambin, Odile; du Poset, Aline Maire; Assifaoui, Ali

2018-06-15

Polysaccharide-based hydrogels were prepared by the diffusion of various divalent cations (X 2+ ) into the polygalacturonate (polyGal) solution through a dialysis membrane. The diffusion of various divalent cations (Mg 2+ , Ca 2+ , Zn 2+ and Ba 2+ ) was investigated. The polyGal gel growth was studied as a function of the initial cation concentration by both viscoelastic and turbidity measurements. We have demonstrated for the first time that the determination of the spatiotemporal variation of turbidity during the gelation process allowed to study the gel front migration. For Ca-polyGal, Zn-polyGal and Ba-polyGal, the gel front migration was characterized by the presence of a peak at the sol/gel interface. This peak was not observed in the case of Mg-polyGal where the gel was not formed. The apparent diffusion coefficient of the gel front (D app ) which was calculated from the evolution of this peak increased when the initial cation concentration was increased. Moreover, we have suggested a gelation mechanism based on the presence of a threshold molar ratio R* (=[X 2+ ]/[Galacturonic unit]) in which some point-like crosslinks are precursors of the formation of dimers and multimers inducing the contraction of the gel and thus the formation of the gel front. Copyright © 2018 Elsevier Ltd. All rights reserved.

A shear-induced network of aligned wormlike micelles in a sugar-based molecular gel. From gelation to biocompatibility assays.

Science.gov (United States)

Fitremann, Juliette; Lonetti, Barbara; Fratini, Emiliano; Fabing, Isabelle; Payré, Bruno; Boulé, Christelle; Loubinoux, Isabelle; Vaysse, Laurence; Oriol, Luis

2017-10-15

A new low molecular weight hydrogelator with a saccharide (lactobionic) polar head linked by azide-alkyne click chemistry was prepared in three steps. It was obtained in high purity without chromatography, by phase separation and ultrafiltration of the aqueous gel. Gelation was not obtained reproducibly by conventional heating-cooling cycles and instead was obtained by shearing the aqueous solutions, from 2 wt% to 0.25 wt%. This method of preparation favored the formation of a quite unusual network of interconnected large but thin 2D-sheets (7nm-thick) formed by the association side-by-side of long and aligned 7nm diameter wormlike micelles. It was responsible for the reproducible gelation at the macroscopic scale. A second network made of helical fibres with a 10-13nm diameter, more or less intertwined was also formed but was scarcely able to sustain a macroscopic gel on its own. The gels were analysed by TEM (Transmission Electronic Microscopy), cryo-TEM and SAXS (Small Angle X-ray Scattering). Molecular modelling was also used to highlight the possible conformations the hydrogelator can take. The gels displayed a weak and reversible transition near 20°C, close to room temperature, ascribed to the wormlike micelles 2D-sheets network. Heating over 30°C led to the loss of the gel macroscopic integrity, but gel fragments were still observed in suspension. A second transition near 50°C, ascribed to the network of helical fibres, finally dissolved completely these fragments. The gels showed thixotropic behaviour, recovering slowly their initial elastic modulus, in few hours, after injection through a needle. Stable gels were tested as scaffold for neural cell line culture, showing a reduced biocompatibility. This new gelator is a clear illustration of how controlling the pathway was critical for gel formation and how a new kind of self-assembly was obtained by shearing. Copyright © 2017 Elsevier Inc. All rights reserved.

Study for process and equipment design of wet gelation stages in vibropacking process

International Nuclear Information System (INIS)

Tanimoto, Ryoji; Kikuchi, Toshiaki; Tanaka, Hirokazu; Amino, Masaki; Yanai, Minoru

2004-02-01

Process and layout design of external wet gelation stages in vibropacking process was examined for the feasibility study of commercialized FBR cycle system. In this study, following process stages for the oxide core fuel production line were covered, that is, solidification, washing, drying, calcination, reduction, sintering stages including interim storage of sintering particles and reagent recovery stage. The main results obtained by this study are as follows: (1) Based on the process examination results conducted previously, process-flow, mass-balance and number of production line/equipment were clarified. The process is covered from the receive tank of feed solution to the interim storage equipment. Reagent recovery process-flow, mass-balance were also clarified. And preliminary design of the main equipment was reexamined. (2) Normal operation procedure and the procedure after process failure were summarized along with a remote automated operation procedure. Operation sequence of each production line was mapped out by using a time-chart. (3) Design outline of reagent recovery equipments, installed to recover waste liquid from the wet gelation stages in the view of environmental impact were examined. Effective techniques such as collection of solvent, residue waste treatment method were examined its applicability and selected. Schematic block diagram was presented. (4) Analytical items and analyzing apparatus were extracted taking into account of quality control and process management. Analytical sample taking position and frequency of sampling were also examined. (5) A schematic layout drawing of main manufacturing process and reagent recovery process was presented taking into account of material handling. (6) A feature of the operating rate at each process stage was examined by analyzing failure rate reliability of each component. applying the reliability-centred method. (RCM), the operating rate was evaluated and annual maintenance period was estimated using

Shorter Perceived Outpatient MRI Wait Times Associated With Higher Patient Satisfaction.

Science.gov (United States)

Holbrook, Anna; Glenn, Harold; Mahmood, Rabia; Cai, Qingpo; Kang, Jian; Duszak, Richard

2016-05-01

The aim of this study was to assess differences in perceived versus actual wait times among patients undergoing outpatient MRI examinations and to correlate those times with patient satisfaction. Over 15 weeks, 190 patients presenting for outpatient MR in a radiology department in which "patient experience" is one of the stated strategic priorities were asked to (1) estimate their wait times for various stages in the imaging process and (2) state their satisfaction with their imaging experience. Perceived times were compared with actual electronic time stamps. Perceived and actual times were compared and correlated with standardized satisfaction scores using Kendall τ correlation. The mean actual wait time between patient arrival and examination start was 53.4 ± 33.8 min, whereas patients perceived a mean wait time of 27.8 ± 23.1 min, a statistically significant underestimation of 25.6 min (P perceived wait times at all points during patient encounters were correlated with higher satisfaction scores (P perceived and actual wait times were both correlated with higher satisfaction scores. As satisfaction surveys play a larger role in an environment of metric transparency and value-based payments, better understanding of such factors will be increasingly important. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Diffusion of Acetic Acid Across Oil/Water Interface in Emulsification-Internal Gelation Process for Preparation of Alginate Gel Beads

Institute of Scientific and Technical Information of China (English)

LIU Xiu-dong; YU Wei-ting; LIN Jun-zhang; MA Xiao-jun; YUAN Quan

2007-01-01

Alginate has been widely used in cell microencapsulation and drug delivery systems in the form of gel beads or microcapsules. Although an alternative novel emulsification-internal gelation technology has been established and both the properties and the potential applications of the beads in drug delivery systems have been studied, the mechanism has not been well understood compared with the traditional droplet method( external gelation technology). On the basis of our previous knowledge that the novel technology is composed of complicatedly consecutive processes with multistep diffusion and re action, and the diffusion of acetic acid across oil/water interface being the prerequisite that determines the occurrence and rate for the reactions and the structures and properties of final produced gel beads, a special emphasis was placed on the diffusion process. With the aid of diffusion modeling and simple experimental design, the diffusion rate constant and diffusion coefficient of acetic acid across oil/water interface were determined to be in the orders of magnitude of 10-6 and 10-16, respectively. This knowledge will be of particular importance in understanding and interpreting the formation, structure of the gel beads and the relationship between the structure and properties and guiding the preparation and quality control of the gel beads.

Efficient Synthesis of MCu (M = Pd, Pt, and Au) Aerogels with Accelerated Gelation Kinetics and their High Electrocatalytic Activity.

Science.gov (United States)

Zhu, Chengzhou; Shi, Qiurong; Fu, Shaofang; Song, Junhua; Xia, Haibing; Du, Dan; Lin, Yuehe

2016-10-01

To accelerate hydrogel formation and further simplify the synthetic procedure, a series of MCu (M = Pd, Pt, and Au) bimetallic aerogels is synthesized from the in situ reduction of metal precursors through enhancement of the gelation kinetics at elevated temperature. Moreover, the resultant PdCu aerogel with ultrathin nanowire networks exhibits excellent electrocatalytic performance toward ethanol oxidation, holding promise in fuel-cell applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Investigations of model polymers: Dynamics of melts and statics of a long chain in a dilute melt of shorter chains

International Nuclear Information System (INIS)

Bishop, M.; Ceperley, D.; Frisch, H.L.; Kalos, M.H.

1982-01-01

We report additional results on a simple model of polymers, namely the diffusion in concentrated polymer systems and the static properties of one long chain in a dilute melt of shorter chains. It is found, for the polymer sizes and time scales amenable to our computer calculations, that there is as yet no evidence for a ''reptation'' regime in a melt. There is some indication of reptation in the case of a single chain moving through fixed obstacles. No statistically significant effect of the change, from excluded volume behavior of the long chain to ideal behavior as the shorter chains grow, is observed

In Vitro Comparison of Holmium Lasers: Evidence for Shorter Fragmentation Time and Decreased Retropulsion Using a Modern Variable-pulse Laser.

Science.gov (United States)

Bell, John Roger; Penniston, Kristina L; Nakada, Stephen Y

2017-09-01

To compare the performance of variable- and fixed-pulse lasers on stone phantoms in vitro. Seven-millimeter stone phantoms were made to simulate calcium oxalate monohydrate stones using BegoStone plus. The in vitro setting was created with a clear polyvinyl chloride tube. For each trial, a stone phantom was placed at the open end of the tubing. The Cook Rhapsody H-30 variable-pulse laser was tested on both long- and short-pulse settings and was compared to the Dornier H-20 fixed-pulse laser; 5 trials were conducted for each trial arm. Fragmentation was accomplished with the use of a flexible ureteroscope and a 273-micron holmium laser fiber using settings of 1 J × 12 Hz. The treatment time (in minute) for complete fragmentation was recorded as was the total retropulsion distance (in centimeter) during treatment. Laser fibers were standardized for all repetitions. The treatment time was significantly shorter with the H-30 vs the H-20 laser (14.3 ± 2.5 vs 33.1 ± 8.9 minutes, P = .008). There was no difference between the treatment times using the long vs short pulse widths of the H-30 laser (14.4 ± 3.4 vs 14.3 ± 1.7 minutes, P = .93). Retropulsion differed by laser type and pulse width, H-30 long pulse (15.8 ± 5.7 cm), H-30 short pulse (54.8 ± 7.1 cm), and H-20 (33.2 ± 12.5 cm) (P laser fragmented stone phantoms in half the time of the H-20 laser regardless of the pulse width. Retropulsion effects differed between the lasers, with the H-30 causing the least retropulsion. Longer pulse widths result in less stone retropulsion. Copyright © 2017 Elsevier Inc. All rights reserved.

Shorter height is related to lower cardiovascular disease risk – A narrative review

Directory of Open Access Journals (Sweden)

Thomas T. Samaras

2013-01-01

Full Text Available Numerous Western studies have shown a negative correlation between height and cardiovascular disease. However, these correlations do not prove causation. This review provides a variety of studies showing short people have little to no cardiovascular disease. When shorter people are compared to taller people, a number of biological mechanisms evolve favoring shorter people, including reduced telomere shortening, lower atrial fibrillation, higher heart pumping efficiency, lower DNA damage, lower risk of blood clots, lower left ventricular hypertrophy and superior blood parameters. The causes of increased heart disease among shorter people in the developed world are related to lower income, excessive weight, poor diet, lifestyle factors, catch-up growth, childhood illness and poor environmental conditions. For short people in developed countries, the data indicate that a plant-based diet, leanness and regular exercise can substantially reduce the risk of cardiovascular disease.

Fabrication and Characterization of Device Pressure Regulation System Orifice of Manufacturing Process Gel Uranium Column Gelation External

International Nuclear Information System (INIS)

Triyono; Sutarni; Indra Suryawan

2009-01-01

The device pressure regulation orifice system of manufacturing process gel uranium on external column gelation has been made and characterized. The device consists : compressor 5.75-6.75 kg / cm 2 , air container tank, power supply 24 volts dc, solenoid valve 24 volts dc, pressure indicator 0-100 mbar, pressure indicator 0-250 mbar, mechanical valve and power electric 380 volts 50 Hz. The activity includes: installation device system and characterization with pressure variation orifice 5-75 mbar on the compressor 5.75-6.5 kg/cm 2 continuously for 1 minute. The method of installation i.e: wiring and piping to first component and support component (compressor and pressure air indicator, air container tank and pressure air indicator, solenoid valve, power supply 220 volts / 24 volts dc and orifice). After apparatus installed has been tested by the characterization without feed under air pressure varied to orifice of 5-75 mbar and device characterization with variation diameter orifice of 0.5-1 mm and orifice pressure of 5-75 mbar. The result in the characterization an every component good function, can be operation by input pressure range of 15-185 mbar orifice pressure range of 5-75 mbar. The characterization result device pressure regulation orifice system showed that: the system can be good operation of air pressure regulation orifice between 5-75 mbar with diameter orifice 0.5 mm to result gelation range of 10-25 piece / minute with variation air pressure input between 15-185 mbar of air pressure compressor 5.75-6.5 kg cm 2 . (author)

Evaluation of some physico-chemical properties of restructured trout and hake mince during cold gelation and chilled storage

DEFF Research Database (Denmark)

Moreno, H.M.; Javier Borderias, A.; Baron, Caroline

2010-01-01

Cold gelation was carried out on trout (Oncorhynchus mykiss) or on hake (Merluccius mertuccius) mince with or without addition of fish oil and using microbial transglutaminase (MTGase). Products were stored at 4 QC for 6 days and lipid oxidation, protein oxidation, texture, water binding capacity......, and colour were followed. Results indicated that MTGase was able to generate gels with good properties for both trout and hake. Gels prepared with trout were oxidised whilst gels prepared with hake were stable toward oxidation even in the presence of 5% fish oil. However, in the presence of oil...

Self-Healing Phase Change Salogels with Tunable Gelation Temperature.

Science.gov (United States)

Karimineghlani, Parvin; Palanisamy, Anbazhagan; Sukhishvili, Svetlana A

2018-04-19

Chemically cross-linked polymer matrices have demonstrated strong potential for shape stabilization of molten phase change materials (PCM). However, they are not designed to be fillable and removable from a heat exchange module for an easy replacement with new PCM matrices and lack self-healing capability. Here, a new category of shapeable, self-healing gels, "salogels", is introduced. The salogels reversibly disassemble in a high-salinity environment of a fluid inorganic PCM [lithium nitrate trihydrate (LNH)], at a preprogrammed temperature. LNH was employed as a high latent heat PCM and simultaneously as a solvent, which supported the formation of a network of polyvinyl alcohol (PVA) chains via physical cross-linking through poly(amidoamine) dendrimers of various generations. The existence of hydrogen bonding and the importance of low-hydration state of PVA for the efficient gelation were experimentally confirmed. The thermal behavior of PCM salogels was highly reversible and repeatable during multiple heating/cooling cycles. Importantly, the gel-sol transition temperature could be precisely controlled within a range of temperature above LNH's melting point by the choice of dendrimer generation and their concentration. Shape stabilization and self-healing properties of the salogels, taken together with tunability of their temperature-induced fluidization make these materials attractive for thermal energy storage applications that require on-demand removal and replacement of used inorganic PCM salt hydrates.

SHORTER MENSTRUAL CYCLES ASSOCIATED WITH CHLORINATION BY-PRODUCTS IN DRINKING WATER

Science.gov (United States)

Shorter Menstrual Cycles Associated with Chlorination by-Products in Drinking Water. Gayle Windham, Kirsten Waller, Meredith Anderson, Laura Fenster, Pauline Mendola, Shanna Swan. California Department of Health Services.In previous studies of tap water consumption we...

Production and characterization of nanocapsules encapsulated linalool by ionic gelation method using chitosan as wall material

Directory of Open Access Journals (Sweden)

Zuobing XIAO

Full Text Available Abstract Linalool has been extensively applied in various fields, such as flavoring agent, perfumes, cosmetics and medical science. However, linalool is unstable, volatile and readily oxidizable. A sensitive substance can be encapsulated in a capsule, so encapsulation technology can solve these problems. In this paper, linalool-loaded nanocapsules (Lin-nanocapsules were prepared via the ionic gelation method and Lin-nanocapsules were characterized. The results of Fourier transformation infrared spectroscopy (FTIR showed that linalool was successfully encapsulated in the wall materials. Scanning electron microscopy (SEM results demonstrated that the shapes of Lin-nanocapsules, with smooth surfaces, were nearly spherical. Lin-nanocapsule average particle size was 352 nm and its polydispersity index (PDI was proved to be 0.214 by the results of dynamic light scattering (DLC. Thermogravimetric results indicated that linalool loading capacity (LC was 15.17%, and encapsulation could decrease linalool release and increase linalool retaining time under the high temperature. Oscillatory shear and steady-state shear measurements of Lin-nanocapsule emulsions were systematically investigated. The results of steady-state shear showed that Lin-nanocapsule emulsion, which was Newtonian only for high shear rate, was non-Newtonian. It was proved by oscillatory shear that when oscillation frequency changed from low to high, Lin-nanocapsules emulsion changed from viscous into elastic.

Nanoparticle and gelation stabilized functional composites of an ionic salt in a hydrophobic polymer matrix.

Directory of Open Access Journals (Sweden)

Selin Kanyas

Full Text Available Polymer composites consisted of small hydrophilic pockets homogeneously dispersed in a hydrophobic polymer matrix are important in many applications where controlled release of the functional agent from the hydrophilic phase is needed. As an example, a release of biomolecules or drugs from therapeutic formulations or release of salt in anti-icing application can be mentioned. Here, we report a method for preparation of such a composite material consisted of small KCOOH salt pockets distributed in the styrene-butadiene-styrene (SBS polymer matrix and demonstrate its effectiveness in anti-icing coatings. The mixtures of the aqueous KCOOH and SBS-cyclohexane solutions were firstly stabilized by adding silica nanoparticles to the emulsions and, even more, by gelation of the aqueous phase by agarose. The emulsions were observed in optical microscope to check its stability in time and characterized by rheological measurements. The dry composite materials were obtained via casting the emulsions onto the glass substrates and evaporations of the organic solvent. Composite polymer films were characterized by water contact angle (WCA measurements. The release of KCOOH salt into water and the freezing delay experiments of water droplets on dry composite films demonstrated their anti-icing properties. It has been concluded that hydrophobic and thermoplastic SBS polymer allows incorporation of the hydrophilic pockets/phases through our technique that opens the possibility for controlled delivering of anti-icing agents from the composite.

New models of radical polymerization with branching and scission predicting molecular weight distribution in tubular and series of continuous stirred tank reactors allowing for multiradicals and gelation

NARCIS (Netherlands)

Yaghini, N.; Iedema, P.D.

2015-01-01

Modeling of the mol. wt. distribution (MWD) of low-​d. Polyethylene (ldPE) has been carried out for a tubular reactor under realistic non-​isothermal conditions and for a series of CSTR's. The model allows for the existence of multiradicals and the occurrence of gelation. The deterministic model is

Production and characterization of alginate-starch-chitosan microparticles containing stigmasterol through the external ionic gelation technique

Directory of Open Access Journals (Sweden)

Gislene Mari Fujiwara

2013-09-01

Full Text Available Stigmasterol - a plant sterol with several pharmacological activities - is susceptible to oxidation when exposed to air, a process enhanced by heat and humidity. In this context, microencapsulation is a way of preventing oxidation, allowing stigmasterol to be incorporated into various pharmaceutical forms while increasing its absorption. Microparticles were obtained using a blend of polymers of sodium alginate, starch and chitosan as the coating material through a one-stage process using the external gelation technique. Resultant microparticles were spherical, averaging 1.4 mm in size. Encapsulation efficiency was 90.42% and method yield 94.87%. The amount of stigmasterol in the oil recovered from microparticles was 9.97 mg/g. This technique proved feasible for the microencapsulation of stigmasterol.

Biological Effects of Drug-Free Alginate Beads Cross-Linked by Copper Ions Prepared Using External Ionotropic Gelation.

Science.gov (United States)

Pavelková, M; Kubová, K; Vysloužil, J; Kejdušová, M; Vetchý, D; Celer, V; Molinková, D; Lobová, D; Pechová, A; Vysloužil, J; Kulich, P

2017-05-01

External ionotropic gelation offers a unique possibility to entrap multivalent ions in a polymer structure. The aim of this experimental study was to prepare new drug-free sodium alginate (ALG) particles cross-linked by Cu 2+ ions and to investigate their technological parameters (particle size, sphericity, surface topology, swelling capacity, copper content, release of Cu 2+ ions, mucoadhesivity) and biological activity (cytotoxicity and efficiency against the most common vaginal pathogens-Herpes simplex, Escherichia coli, Candida albicans) with respect to potential vaginal administration. Beads prepared from NaALG dispersions (3 or 4%) were cross-linked by Cu 2+ ions (0.5 or 1.0 M CuCl 2 ) using external ionotropic gelation. Prepared mucoadhesive beads with particle size over 1000 μm exhibited sufficient sphericity (all ˃0.89) and copper content (214.8-249.07 g/kg), which increased with concentration of polymer and hardening solution. Dissolution behaviour was characterized by extended burst effect, followed by 2 h of copper release. The efficiency of all samples against the most common vaginal pathogens was observed at cytotoxic Cu 2+ concentrations. Anti-HSV activity was demonstrated at a Cu 2+ concentration of 546 mg/L. Antibacterial activity of beads (expressed as minimum inhibition concentration, MIC) was influenced mainly by the rate of Cu 2+ release which was controlled by the extent of swelling capacity. Lower MIC values were found for E. coli in comparison with C. albicans. Sample ALG-3_1.0 exhibited the fastest copper release and was proved to be the most effective against both bacteria. This could be a result of its lower polymer concentration in combination with smaller particle size and thus larger surface area.

Gelation of high-methoxy pectin by enzymic de-esterification in the presence of calcium ions: a preliminary evaluation.

Science.gov (United States)

O'Brien, Aileen B; Philp, Kevin; Morris, Edwin R

2009-09-28

Cohesive gels have been obtained by de-esterification of 1.0wt% high-methoxy citrus pectin (degree of esterification approximately 68%) in the presence of Ca(2+) cations, using a commercial preparation (NovoShape) of fungal methyl esterase cloned from Aspergillus aculeatus. A convenient rate of network formation (gelation within approximately 30min) was achieved at an enzyme concentration of 0.2 PEU/g pectin. At a Ca(2+)-concentration of 40mM and incubation temperature of 20 degrees C, severe syneresis (>7% of sample mass) was observed, but release of fluid decreased with decreasing concentration of Ca(2+) and increasing temperature of incubation, becoming undetectable for 10mM Ca(2+) at 30 degrees C. Under these conditions, progressive development of solid-like character (storage modulus, G') was observed during 160min of enzymic de-esterification, and the mechanical spectrum recorded at the end of the incubation period had the form typical of a biopolymer gel. On subsequent heating to 70 degrees C, dissociation of the gel network (sigmoidal reduction in G' and G'') was observed. At or above the midpoint temperature of this melting process ( approximately 50 degrees C), there was no indication of gel formation on enzymic de-esterification (at 50 or 60 degrees C). At lower temperatures (20, 30 and 40 degrees C), the rate of gelation (assessed visually) showed no systematic increase as the incubation temperature was increased towards the temperature-optimum of the enzyme ( approximately 50 degrees C). This unexpected behaviour is attributed to competition between faster de-esterification and slower formation of Ca(2+)-induced 'egg-box' junctions.

Homework schedule: an important factor associated with shorter sleep duration among Chinese school-aged children.

Science.gov (United States)

Li, Shenghui; Yang, Qian; Chen, Zhe; Jin, Xingming; Jiang, Fan; Shen, Xiaoming

2014-09-03

This study was designed to examine the hypothesis that homework schedule has adverse impacts on Chinese children's sleep-wake habits and sleep duration. A random sample of 19,299 children aged 5.08 to 11.99 years old participated in a large, cross-sectional survey. A parent-administered questionnaire was completed to quantify children's homework schedule and sleep behaviors. Generally, it was demonstrated that more homework schedule was significantly associated with later bedtime, later wake time, and shorter sleep duration. Among all sleep variables, bedtime and sleep duration during weekdays appeared to be most affected by homework schedule, especially homework schedule during weekdays.

Insight on the formation of chitosan nanoparticles through ionotropic gelation with tripolyphosphate.

Science.gov (United States)

Koukaras, Emmanuel N; Papadimitriou, Sofia A; Bikiaris, Dimitrios N; Froudakis, George E

2012-10-01

This work reports details pertaining to the formation of chitosan nanoparticles that we prepare by the ionic gelation method. The molecular interactions of the ionic cross-linking of chitosan with tripolyphosphate have been investigated and elucidated by means of all-electron density functional theory. Solvent effects have been taken into account using implicit models. We have identified primary-interaction ionic cross-linking configurations that we define as H-link, T-link, and M-link, and we have quantified the corresponding interaction energies. H-links, which display high interaction energies and are also spatially broadly accessible, are the most probable cross-linking configurations. At close range, proton transfer has been identified, with maximum interaction energies ranging from 12.3 up to 68.3 kcal/mol depending on the protonation of the tripolyphosphate polyanion and the relative coordination of chitosan with tripolyphosphate. On the basis of our results for the linking types (interaction energies and torsion bias), we propose a simple mechanism for their impact on the chitosan/TPP nanoparticle formation process. We introduce the β ratio, which is derived from the commonly used α ratio but is more fundamental since it additionally takes into account structural details of the oligomers.

OPTIMIZATION OF STIRRING SPEED AND STIRRING TIME TOWARD NANOPARTICLE SIZE OF CHITOSAN-SIAM CITRUS PEEL (Citrus nobilis L.var Microcarpa 70% ETHANOL EXTRACT

Directory of Open Access Journals (Sweden)

Wintari Taurina

2017-04-01

Full Text Available Siam citrus peel (Citrus nobilis L. var. Microcarpa is a plant derived from Sambas Regency, West Kalimantan Province. Bioavailability of herbal active compounds can be enhanced by formulating extract into nanoparticle. The polymer used was chitosan with crosslinker Na-TPP. Stirring speed and stirring time play an important role to produce small particle size in forming nanoparticle using ionic gelation method. Enhancement of stirring speed and stirring time could reduce particle size. Nanoparticles were prepared using ionic gelation method by mixing Na-TPP, extract and chitosan (1:1:6 with varying the stirring speed 500 rpm, 1000 rpm, 1500 rpm and stirring time 1 hrs, 2 hrs, 3 hrs. The particle size of nanoparticle was found to be 85.3 nm at 1000 rpm of stirring speed and 3 hrs of stirring times, with polidispersity index 0.287, zeta potential +32.37 mV and entrapment efficiency 87.12 %.

Family History of Early Infant Death Correlates with Earlier Age at Diagnosis But Not Shorter Time to Diagnosis for Severe Combined Immunodeficiency

Directory of Open Access Journals (Sweden)

Anderson Dik Wai Luk

2017-07-01

Full Text Available BackgroundSevere combined immunodeficiency (SCID is fatal unless treated with hematopoietic stem cell transplant. Delay in diagnosis is common without newborn screening. Family history of infant death due to infection or known SCID (FH has been associated with earlier diagnosis.ObjectiveThe aim of this study was to identify the clinical features that affect age at diagnosis (AD and time to the diagnosis of SCID.MethodsFrom 2005 to 2016, 147 SCID patients were referred to the Asian Primary Immunodeficiency Network. Patients with genetic diagnosis, age at presentation (AP, and AD were selected for study.ResultsA total of 88 different SCID gene mutations were identified in 94 patients, including 49 IL2RG mutations, 12 RAG1 mutations, 8 RAG2 mutations, 7 JAK3 mutations, 4 DCLRE1C mutations, 4 IL7R mutations, 2 RFXANK mutations, and 2 ADA mutations. A total of 29 mutations were previously unreported. Eighty-three of the 94 patients fulfilled the selection criteria. Their median AD was 4 months, and the time to diagnosis was 2 months. The commonest SCID was X-linked (n = 57. A total of 29 patients had a positive FH. Candidiasis (n = 27 and bacillus Calmette–Guérin (BCG vaccine infection (n = 19 were the commonest infections. The median age for candidiasis and BCG infection documented were 3 months and 4 months, respectively. The median absolute lymphocyte count (ALC was 1.05 × 109/L with over 88% patients below 3 × 109/L. Positive FH was associated with earlier AP by 1 month (p = 0.002 and diagnosis by 2 months (p = 0.008, but not shorter time to diagnosis (p = 0.494. Candidiasis was associated with later AD by 2 months (p = 0.008 and longer time to diagnosis by 0.55 months (p = 0.003. BCG infections were not associated with age or time to diagnosis.ConclusionFH was useful to aid earlier diagnosis but was overlooked by clinicians and not by parents. Similarly, typical clinical features of

Micellizationa and Gelation of Water Soluable Thermo-and Light-sensitive Block Copolymer Investigated by SANS

Science.gov (United States)

He, Lilin; Hu, Bin; Zhao, Bin

2015-03-01

Here we present an extensive small-angle neutron scattering (SANS) characterization of micellization and gelation of PEO-b-P(TEGEA-co-NBA) in deuterated water in a wide range of temperatures and concentrations before and after the removal of o-nitrobenzyl group by UV irradiation. Scattering data analysis indicated that unimers predominated in the solutions at low temperatures and concentrations. The polymer self-assembled into micelles with the P(TEGEA-co-NBA) block packed into the core and PEO forming the corona layer. A core-shell model was used to fit SANS data and obtain sizes and scattering length densities. Structural parameters such as the aggregation numbers, the radius of gyration of the chains in the shell region, the number of water molecules in the both regions were determined. The structural information combined with the rheological data were used to describe the phase behaviors of the diblock copolymer in aqueous solution.

Implications of shorter cells in PEP

International Nuclear Information System (INIS)

Wiedemann, H.

1975-01-01

Further studies on the beam-stay-clear requirements in PEP led to the conclusion that the vertical aperture needed to be enlarged. There are two main reasons for that: Observations at SPEAR indicate that the aperture should be large enough for a fully coupled beam. Full coupling of the horizontal and vertical betatron oscillations occurs not only occasionally when the energy, tune or betatron function at the interaction point is changed but also due to the beam/endash/beam effect of two strong colliding beams. The second reason for an increased aperture requirement is the nonlinear perturbation of the particle trajectories by the sextupoles. This perturbation increases a fully coupled beam by another 50% to 80%. Both effects together with a +-5 mm allowance for closed orbit perturbation result in a vertical beam-stay-clear in the bending magnets of +-4.8 to +-5.6 cm, compared to the present +-2.0 cm. This beam-stay-clear, together with additional space for vacuum chamber, etc., leads to very costly bending magnets. In this note, a shorter cell length is proposed which would reduce considerably the vertical beam-stay-clear requirements in the bending magnets. 7 figs

One long chain among shorter chains : the Flory approach revisited

OpenAIRE

Raphaël , E.; Fredrickson , G.; Pincus , P.

1992-01-01

We consider the mean square end-to-end distance of a long chain immersed in a monodisperse, concentrated solution of shorter, chemically identical chains. In contrast with the earlier work of Flory, no simplifying assumption on the wave vector dependence of the effective potential between segments is made. In order to obtain a closed form expression for the dimension of the long chain, we first derive a general expression for the mean square end-to-end distance of a flexible chain with arbitr...

Shorter telomeres in peripheral blood mononuclear cells from older persons with sarcopenia: results from an exploratory study

Directory of Open Access Journals (Sweden)

Emanuele eMarzetti

2014-08-01

Full Text Available Background. Telomere shortening in peripheral blood mononuclear cells (PBMCs has been associated with biological age and several chronic degenerative diseases. However, the relationship between telomere length and sarcopenia, a hallmark of the aging process, is unknown. The aim of the present study was therefore to determine whether PBMC telomeres obtained from sarcopenic older persons were shorter relative to non-sarcopenic peers. We further explored if PBMC telomere length was associated with frailty, a major clinical correlate of sarcopenia.Methods. Analyses were conducted in 142 persons aged >/= 65 years referred to a geriatric outpatient clinic (University Hospital. The presence of sarcopenia was established according to the European Working Group on Sarcopenia in Older People criteria, with bioelectrical impedance analysis used for muscle mass estimation. The frailty status was determined by both the Fried’s criteria (physical frailty, PF and a modified Rockwood’s frailty index (FI. Telomere length was measured in PBMCs by quantitative real-time polymerase chain reaction according to the Telomere/Single copy gene ratio (T/S method.Results. Among 142 outpatients (mean age 75.0 ± 6.5 years, 59.2% women, sarcopenia was diagnosed in 23 individuals (19.3%. The PF phenotype was detected in 74 participants (52.1%. The average FI score was 0.46 ± 0.17. PBMC telomeres were shorter in sarcopenic subjects (T/S = 0.21; 95% CI: 0.18 – 0.24 relative to non-sarcopenic individuals (T/S = 0.26; 95%: CI: 0.24 – 0.28; p = 0.01, independent of age, gender, smoking habit, or comorbidity. No significant associations were determined between telomere length and either PF or FI.Conclusion. PBMC telomere length, expressed as T/S values, is shorter in older outpatients with sarcopenia. The cross-sectional assessment of PBMC telomere length is not sufficient at capturing the complex, multidimensional syndrome of frailty.

1H, 15N and 13C assignments of domain 5 of Dictyostelium discoideum gelation factor (ABP-120) in its native and 8M urea-denatured states.

Science.gov (United States)

Hsu, Shang-Te Danny; Cabrita, Lisa D; Christodoulou, John; Dobson, Christopher M

2009-06-01

The gelation factor from Dictyostelium discoideum (ABP-120) is an actin binding protein consisting of six immunoglobulin (Ig) domains in the C-terminal rod domain. We have recently used the pair of domains 5 and 6 of ABP-120 as a model system for studying multi-domain nascent chain folding on the ribosome. Here we present the NMR assignments of domain 5 in its native and 8M urea-denatured states.

Examination of an aloe vera galacturonate polysaccharide capable of in situ gelation for the controlled release of protein therapeutics

Science.gov (United States)

McConaughy, Shawn David

fluorescence emission of the probe molecule 1,8-anilino-1-naphthalene sulphonic acid (1,8-ANS) as a function of polymer concentration. Correlations are drawn between viscosity experiments and measurement of zeta potential. Increased degrees of intermolecular interactions are responsible for a shift of Ce to lower polymer concentrations with increasing ionic strength. Additionally, dynamic rheology data are presented highlighting the ability of AvP to form gels at low polymer and calcium ion concentrations, exemplifying the technological potential of this polysaccharide for in-situ drug delivery. In the second section, properties of Aloe vera galacturonate hydrogels formed via Ca2+ crosslinking have been studied in regard to key parameters influencing gel formation including molecular weight, ionic strength and molar ratio of Ca2+ to COO- functionality. Dynamic oscillatory rheology and pulsed field gradient NMR (PFG-NMR) studies have been conducted on hydrogels formed at specified Ca2+ concentrations in the presence and absence of Na+ and K+ ions, in order to assess the feasibility of in situ gelation for controlled delivery of therapeutics. Aqueous Ca2+ concentrations similar to those present in nasal and subcutaneous fluids induce the formation of elastic Aloe vera polysaccharide (AvP) hydrogel networks. By altering the ratio of Ca2+ to COO- functionality, networks may be tailored to provide elastic modulus (G') values between 20 and 20,000 Pa. The Aloe vera polysaccharide exhibits time dependent phase separation in the presence of monovalent electrolytes. Thus the relative rates of calcium induced gelation and phase separation become major considerations when designing a system for in situ delivery applications where both monovalent (Na+, K+) and divalent (Ca2+) ions are present. PFG-NMR and fluorescence microscopy confirm that distinctly different morphologies are present in gels formed in the presence and absence 0.15 M NaCl. Curve fitting of theoretical models to

Production of BCG alginate-PLL microcapsules by emulsification/internal gelation.

Science.gov (United States)

Esquisabel, A; Hernández, R M; Igartua, M; Gascón, A R; Calvo, B; Pedraz, J L

1997-01-01

A biocompatible emulsification method for microencapsulation of live cells and enzymes within a calcium alginate matrix applied to Bacillus Calmette-Guérin (BCG) has been developed. Small-diameter alginate beads (microcapsules) were formed via internal gelation of an alginate solution emulsified within vegetable oil. Five different oils (sesame, sweet almond, perhydrosqualene, camomile and jojoba) were used. The rheological analysis of the oils showed a Newtonian behaviour, with viscosities = 30.0, 37.7, 51.2, 59.3 and 67.1 mPa.s for perhydrosqualene, jojoba, camomile, sesame and sweet almond oil respectively. The particle size of the microcapsules obtained ranged from 30.3 microns for the microcapsules prepared with sweet almond oil to 57.0 microns for those made with perhydrosqualene. The mean particle diameter obtained was found to be dependent on the viscosity of the oil employed, according to the equation: phi (micron) = 76.6-0.628 eta (mPa.s) (r2 = 0.943). The encapsulated BCG was identified by the Difco TB stain set K, followed by observation under optical microscopy. Freeze-drying of the microcapsules was carried out to ensure their stability during storage. Two batches of microcapsules (those prepared with sesame and jojoba oil) and four types of cryoprotectors (glucose, trehalose, mannitol and sorbitol), at three concentration levels (5, 10 and 20% w/v) were studied. The parameters evaluated were particle size, physical appearance, reconstitution of lyophilizates and microscopical evaluation. For both batches of microcapsules the best results were obtained with trehalose 5%, showing particle sizes of 42.1 microns in the case of the microcapsules prepared with sesame oil, and of 45.3 microns for those prepared with jojoba.

Combined effects of presalted prerigor and postrigor batter mixtures on chicken breast gelation.

Science.gov (United States)

Choi, Yun-Sang; Kim, Hyun-Wook; Hwang, Ko-Eun; Song, Dong-Hun; Jeong, Tae-Jun; Jeon, Ki-Hong; Kim, Young-Boong; Kim, Cheon-Jei

2015-04-01

We examined the combined effects of prerigor and postrigor batter mixtures on protein gelation. The postrigor batter was prepared with 2% salt, whereas the prerigor meat at 5 min postmortem was used to prepare postrigor batters at different salt levels. For 5 treatments, prerigor batters were mixed with postrigor batter that had 2% salt (control) as follows: T1: ground presalted (1%) hot-boned breast with 1% salt for 50% total batch; T2: ground presalted (2%) hot-boned breast for 50% total batch; T3: ground presalted (3%) hot-boned breast for 30% total batch that was mixed with cold-boned batter for 50% total batch; T4: ground presalted (4%) hot-boned breast for 25% total batch that was mixed with cold-boned batter for 50% total batch; and T5: ground presalted (5%) hot-boned breast for 20% total batch that was mixed with cold-boned batter for 50% total batch. Treatments with both presalted prerigor and postrigor muscle showed less cooking loss and lower emulsion stability than the control, except T5. The protein solubility and apparent viscosity of the control was the lowest. Thus, presalted hot-boned muscle combined with cold-boned muscle positively affected physicochemical properties. © 2015 Poultry Science Association Inc.

A shorter and more specific oral sensitization-based experimental model of food allergy in mice.

Science.gov (United States)

Bailón, Elvira; Cueto-Sola, Margarita; Utrilla, Pilar; Rodríguez-Ruiz, Judith; Garrido-Mesa, Natividad; Zarzuelo, Antonio; Xaus, Jordi; Gálvez, Julio; Comalada, Mònica

2012-07-31

Cow's milk protein allergy (CMPA) is one of the most prevalent human food-borne allergies, particularly in children. Experimental animal models have become critical tools with which to perform research on new therapeutic approaches and on the molecular mechanisms involved. However, oral food allergen sensitization in mice requires several weeks and is usually associated with unspecific immune responses. To overcome these inconveniences, we have developed a new food allergy model that takes only two weeks while retaining the main characters of allergic response to food antigens. The new model is characterized by oral sensitization of weaned Balb/c mice with 5 doses of purified cow's milk protein (CMP) plus cholera toxin (CT) for only two weeks and posterior challenge with an intraperitoneal administration of the allergen at the end of the sensitization period. In parallel, we studied a conventional protocol that lasts for seven weeks, and also the non-specific effects exerted by CT in both protocols. The shorter protocol achieves a similar clinical score as the original food allergy model without macroscopically affecting gut morphology or physiology. Moreover, the shorter protocol caused an increased IL-4 production and a more selective antigen-specific IgG1 response. Finally, the extended CT administration during the sensitization period of the conventional protocol is responsible for the exacerbated immune response observed in that model. Therefore, the new model presented here allows a reduction not only in experimental time but also in the number of animals required per experiment while maintaining the features of conventional allergy models. We propose that the new protocol reported will contribute to advancing allergy research. Copyright © 2012 Elsevier B.V. All rights reserved.

Encapsulating betalains from Opuntia ficus-indica fruits by ionic gelation: Pigment chemical stability during storage of beads.

Science.gov (United States)

Otálora, María Carolina; Carriazo, José Gregorio; Iturriaga, Laura; Osorio, Coralia; Nazareno, Mónica Azucena

2016-07-01

Betalain encapsulation was performed by ionic gelation as a stabilization strategy for these natural pigments. Betalains were extracted from purple cactus fruits and encapsulated in calcium-alginate and in combination of calcium alginate and bovine serum albumin. Beads were characterised by scanning electron microscopy and thermal analysis using differential scanning calorimetry and thermogravimetry. Moisture sorption isotherms were determined. Bead morphology was affected by matrix composition. Pigments storage stability was evaluated at different equilibrium relative humidity and temperatures. Pigment composition of beads was determined by HPLC-MS-MS and degradation products were also analysed after storage; betalamic acid being the major one. Both types of matrices protected the encapsulated pigments, being their storage stability better at low relative humidity than that of the non-encapsulated control material. Antiradical activities of beads were proportional to remaining betalain contents. At high relative humidity, there was no protection and low storage stability was observed in the samples. Copyright © 2016 Elsevier Ltd. All rights reserved.

DSC and TMA studies on freezing and thawing gelation of galactomannan polysaccharide

International Nuclear Information System (INIS)

Iijima, Mika; Hatakeyama, Tatsuko; Hatakeyama, Hyoe

2012-01-01

Research highlights: ► Locust bean gum forms hydrogels by freezing and thawing. ► Syneresis was observed when freezing and thawing cycle (n) increased. ► Dynamic Young's modulus increased with increasing n. ► Non-freezing water content restrained by hydrogels decreased with increasing n. ► Strong gel with densely packed network structure formed with increasing n. - Abstract: Among various kinds of polysaccharides known to form hydrogels, locust bean gum (LBG) consisting of a mannose backbone and galactose side chains has unique characteristics, since LBG forms hydrogels by freezing and thawing. In this study, effect of thermal history on gelation was investigated by differential scanning calorimetry (DSC) and thermomechanical analysis (TMA). Gel/sol ratio calculated by weighing method was found to be affected by sol concentration, freezing rate and the number of freezing and thawing cycle (n). Once LBG hydrogels are formed, they are thermally stable, although syneresis was observed when n increased. Dynamic Young's modulus (E′) of hydrogels measured by TMA in water increased with increasing n and decreasing freezing rate. Non-freezing water calculated from DSC melting peak of ice in the gel decreased with increasing n and decreasing freezing rate. Morphological observation of freeze-dried gels was carried out by scanning electron microscopy (SEM). The above results indicate that weak hydrogel having large molecular network structure transformed into strong gel with densely packed network structure by increasing n and decreasing freezing rate.

Long-Term Costs and Health Consequences of Issuing Shorter Duration Prescriptions for Patients with Chronic Health Conditions in the English NHS.

Science.gov (United States)

Martin, Adam; Payne, Rupert; Wilson, Edward Cf

2018-06-01

The National Health Service (NHS) in England spends over £9 billion on prescription medicines dispensed in primary care, of which over two-thirds is accounted for by repeat prescriptions. Recently, GPs in England have been urged to limit the duration of repeat prescriptions, where clinically appropriate, to 28 days to reduce wastage and hence contain costs. However, shorter prescriptions will increase transaction costs and thus may not be cost saving. Furthermore, there is evidence to suggest that shorter prescriptions are associated with lower adherence, which would be expected to lead to lower clinical benefit. The objective of this study is to estimate the cost-effectiveness of 3-month versus 28-day repeat prescriptions from the perspective of the NHS. We adapted three previously developed UK policy-relevant models, incorporating transaction (dispensing fees, prescriber time) and drug wastage costs associated with 3-month and 28-day prescriptions in three case studies: antihypertensive medications for prevention of cardiovascular events; drugs to improve glycaemic control in patients with type 2 diabetes; and treatments for depression. In all cases, 3-month prescriptions were associated with lower costs and higher QALYs than 28-day prescriptions. This is driven by assumptions that higher adherence leads to improved disease control, lower costs and improved QALYs. Longer repeat prescriptions may be cost-effective compared with shorter ones. However, the quality of the evidence base on which this modelling is based is poor. Any policy rollout should be within the context of a trial such as a stepped-wedge cluster design.

Dyslexics' faster decay of implicit memory for sounds and words is manifested in their shorter neural adaptation.

Science.gov (United States)

Jaffe-Dax, Sagi; Frenkel, Or; Ahissar, Merav

2017-01-24

Dyslexia is a prevalent reading disability whose underlying mechanisms are still disputed. We studied the neural mechanisms underlying dyslexia using a simple frequency-discrimination task. Though participants were asked to compare the two tones in each trial, implicit memory of previous trials affected their responses. We hypothesized that implicit memory decays faster among dyslexics. We tested this by increasing the temporal intervals between consecutive trials, and by measuring the behavioral impact and ERP responses from the auditory cortex. Dyslexics showed a faster decay of implicit memory effects on both measures, with similar time constants. Finally, faster decay of implicit memory also characterized the impact of sound regularities in benefitting dyslexics' oral reading rate. Their benefit decreased faster as a function of the time interval from the previous reading of the same non-word. We propose that dyslexics' shorter neural adaptation paradoxically accounts for their longer reading times, since it reduces their temporal window of integration of past stimuli, resulting in noisier and less reliable predictions for both simple and complex stimuli. Less reliable predictions limit their acquisition of reading expertise.

Synthesis and Characterization of New Thiolated Chitosan Nanoparticles Obtained by Ionic Gelation Method

Directory of Open Access Journals (Sweden)

Reynaldo Esquivel

2015-01-01

Full Text Available We derivatized low molecular weight chitosan (LMWC with 3-mercaptopropanoic acid (3-MPA by a coupling reaction. The chemical modification of LMWC was characterized by Fourier transform infrared spectroscopy (FT-IR and nuclear magnetic resonance, 1HNMR. We researched the influence of 3-MPA on the nanoparticles formation by ionic gelation method using sodium tripolyphosphate (TPP as cross-linker reagent. In order to optimize the nanoparticles formation, we studied the effect of the pH solution and molar ratio on nanoparticles stability. Analyses of particle size, morphology, and surface charge were determined by dynamic light scattering, Atomic Force Microscopy, and zeta potential, respectively. It was found that formation of semispherical and stable nanoparticles was improved due to the chemical modification of chitosan. Optimized semispherical nanoparticles of thiolated chitosan were synthesized with the parameters (pH 4.7, molar ratios 1 : 106. Additionally, we reported the thermodynamic profile of the nanoparticles formation determined by isothermal titration calorimetry (ITC. The aggregation process achieved to form nanoparticles of thiolated and nonmodified chitosan consisted of two stages, considering one binding site model. Gibbs free energy (ΔG and binding constant (Ka describe the aggregation process of thiolated chitosan/TPP, which is an initial reaction and followed by an endothermic stage. These results are promising for the possible application of these nanoparticles as nanocarriers and delivery systems.

Incorporation of essential oil in alginate microparticles by multiple emulsion/ionic gelation process.

Science.gov (United States)

Hosseini, Seyede Marzieh; Hosseini, Hedayat; Mohammadifar, Mohammad Amin; Mortazavian, Amir Mohammad; Mohammadi, Abdorreza; Khosravi-Darani, Kianoosh; Shojaee-Aliabadi, Saeedeh; Dehghan, Solmaz; Khaksar, Ramin

2013-11-01

In this study, an o/w/o multiple emulsion/ionic gelation method was developed for production of alginate microparticles loaded with Satureja hortensis essential oil (SEO). It was found that the essential oil concentration has significant influence on encapsulation efficiency (EE), loading capacity (LC) and size of microparticles. The values of EE, LC and particle mean diameter were about 52-66%, 20-26%, and 47-117 μm, respectively, when the initial SEO content was 1-3% (v/v) .The essential oil-loaded microparticles were porous, as displayed by scanning electron micrograph. The presence of SEO in alginate microparticles was confirmed by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) analyses. SEO-loaded microparticles showed good antioxidant (with DPPH radical scavenging activity of 40.7-73.5%) and antibacterial properties; this effect was greatly improved when the concentration of SEO was 3% (v/v). S. aureus was found to be the most sensitive bacterium to SEO and showed a highest inhibition zone of 304.37 mm(2) in the microparticles incorporated with 3% (v/v) SEO. In vitro release studies showed an initial burst release and followed by a slow release. In addition, the release of SEO from the microparticles followed Fickian diffusion with acceptable release. Copyright © 2013 Elsevier B.V. All rights reserved.

Two-Phase Diffusion Technique for the Preparation of Ultramacroporous/Mesoporous Silica Microspheres via Interface Hydrolysis, Diffusion, and Gelation of TEOS.

Science.gov (United States)

Ju, Minhua; Li, Yupeng; Yu, Liang; Wang, Chongqing; Zhang, Lixiong

2018-02-06

Honeycombed hierarchical ultramacroporous/mesoporous silica microspheres were prepared via the hydrolysis of TEOS in the oil-water interface, with subsequent diffusion and gelation in the acidic water-phase microdroplets with the assistance of a simple homemade microdevice. The diffusion of furfuryl alcohol (FA) also happened at a relatively high rate during the hydrolysis and diffusion of TEOS. Therefore, plenty of FA will be inside of the water microdroplets and form a decent number of polyfurfuryl alcohol (PFA) microparticles, thereby obtaining honeycombed hierarchical porosity silica microspheres with abundant ultramacroporous cavities and mesopores after calcination. It was found that the concentration of FA, residence time, and reaction temperature have significant effects on the porosity and pore size due to the influence on the diffusion rate and amount of FA in water-phase microdroplets. The honeycombed silica microspheres have obvious microscopic visible ultramacroporous cavities with the submicrometer cavity diameter as high as 85% porosity based on the rough overall volume of microsphere. N 2 adsorption-desorption isotherms show that the honeycombed hierarchical porosity silica microspheres have a high surface area of 602 m 2 g -1 , a mesopore volume of 0.77 cm 3 /g, and a mesopore porosity of 99.6% based on the total pore volume of N 2 adsorption-desorption. On the basis of the experiment results, a rational formation process of the honeycombed hierarchical porosity silica microspheres was deduced.

The role of romantic attraction and conflict resolution in predicting shorter and longer relationship maintenance among adolescents.

Science.gov (United States)

Appel, Israel; Shulman, Shmuel

2015-04-01

This study examined the role of romantic attraction and conflict resolution patterns in shorter and longer relationship maintenance among adolescent couples. Data were used from 55 couples aged 15-18 years. Partners completed the Romantic Attraction scale and were observed negotiating a disagreement. Three and 6 months later, they were asked to report whether they were still together. Findings indicated that partners' romantic attraction and the tendency to minimize disagreements during interaction predicted shorter relationship maintenance. In contrast, longer relationship maintenance was predicted by partners' capability to resolve conflicts constructively in a positive atmosphere. Findings are embedded and discussed within Fisher's (2004) evolutionary theory of love.

Shorter Decentralized Attribute-Based Encryption via Extended Dual System Groups

Directory of Open Access Journals (Sweden)

Jie Zhang

2017-01-01

Full Text Available Decentralized attribute-based encryption (ABE is a special form of multiauthority ABE systems, in which no central authority and global coordination are required other than creating the common reference parameters. In this paper, we propose a new decentralized ABE in prime-order groups by using extended dual system groups. We formulate some assumptions used to prove the security of our scheme. Our proposed scheme is fully secure under the standard k-Lin assumption in random oracle model and can support any monotone access structures. Compared with existing fully secure decentralized ABE systems, our construction has shorter ciphertexts and secret keys. Moreover, fast decryption is achieved in our system, in which ciphertexts can be decrypted with a constant number of pairings.

Precipitation and ultimate pH effect on chemical and gelation properties of protein prepared by isoelectric solubilization/precipitation process from pale, soft, exudative (PSE)-like chicken breast meat1.

Science.gov (United States)

Zhao, X; Xing, T; Chen, X; Han, M-Y; Li, X; Xu, X-L; Zhou, G-H

2017-05-01

Pale, soft, exudative (PSE)-like chicken breast is considered deteriorated raw material in the poultry meat industry that has inferior processing ability. The chemical and gelation properties of PSE-like chicken breast meat paste were studied. These pastes were prepared by the pH adjustment method and protein isolation using the isoelectric solubilization/precipitation (ISP) process from PSE-like chicken meat. The ISP-isolated samples were solubilized at pH 11.0 and recovered at pH 5.5 and 6.2. The ultimate pH of the ISP-isolated protein and meat paste was adjusted to 6.2 and 7.0. The ultimate pH in this article referred to the final pH of the extracted protein and meat paste. Higher reactive sulfhydryl content and surface hydrophobicity were found in the precipitation at pH 6.2 than at pH 5.5. However, various ultimate pH values showed no significant influence on the surface hydrophobicity. The hardness of gel, as measured by textural profile analysis, was improved using 6.2 as the precipitation pH compared with pH 5.5. The viscoelastic modulus (G΄) of gel pastes prior to the thermal gelation was higher with ISP treatment. However, lower G΄ was seen after thermal gelation compared with the control. Dynamic rheological measurement demonstrated a different gel-forming mechanism for protein precipitated at pH values of 5.5 and 6.2 compared with the meat paste. The cooking loss showed that the recovered protein failed to form a gel with good water-retention capacity unless the ultimate pH was adjusted to 7.0. Gels made from protein extracted by the ISP method had higher yellowness and lower redness values, probably due to protein denaturation. Precipitation at pH 6.2 formed a harder gel with lower water-retention ability than that at pH 5.5, and this result was possibly due to higher surface hydrophobicity and S-S bridge formation. Overall, network characteristics of ISP-treated protein gels were strongly dependent on precipitation pH and ultimate pH. © 2016

Marital disruption is associated with shorter salivary telomere length in a probability sample of older adults.

Science.gov (United States)

Whisman, Mark A; Robustelli, Briana L; Sbarra, David A

2016-05-01

Marital disruption (i.e., marital separation, divorce) is associated with a wide range of poor mental and physical health outcomes, including increased risk for all-cause mortality. One biological intermediary that may help explain the association between marital disruption and poor health is accelerated cellular aging. This study examines the association between marital disruption and salivary telomere length in a United States probability sample of adults ≥50 years of age. Participants were 3526 individuals who participated in the 2008 wave of the Health and Retirement Study. Telomere length assays were performed using quantitative real-time polymerase chain reaction (qPCR) on DNA extracted from saliva samples. Health and lifestyle factors, traumatic and stressful life events, and neuroticism were assessed via self-report. Linear regression analyses were conducted to examine the associations between predictor variables and salivary telomere length. Based on their marital status data in the 2006 wave, people who were separated or divorced had shorter salivary telomeres than people who were continuously married or had never been married, and the association between marital disruption and salivary telomere length was not moderated by gender or neuroticism. Furthermore, the association between marital disruption and salivary telomere length remained statistically significant after adjusting for demographic and socioeconomic variables, neuroticism, cigarette use, body mass, traumatic life events, and other stressful life events. Additionally, results revealed that currently married adults with a history of divorce evidenced shorter salivary telomeres than people who were continuously married or never married. Accelerated cellular aging, as indexed by telomere shortening, may be one pathway through which marital disruption is associated with morbidity and mortality. Copyright © 2016 Elsevier Ltd. All rights reserved.

The return trip is felt shorter only postdictively: A psychophysiological study of the return trip effect [corrected].

Directory of Open Access Journals (Sweden)

Ryosuke Ozawa

Full Text Available The return trip often seems shorter than the outward trip even when the distance and actual time are identical. To date, studies on the return trip effect have failed to confirm its existence in a situation that is ecologically valid in terms of environment and duration. In addition, physiological influences as part of fundamental timing mechanisms in daily activities have not been investigated in the time perception literature. The present study compared round-trip and non-round-trip conditions in an ecological situation. Time estimation in real time and postdictive estimation were used to clarify the situations where the return trip effect occurs. Autonomic nervous system activity was evaluated from the electrocardiogram using the Lorenz plot to demonstrate the relationship between time perception and physiological indices. The results suggest that the return trip effect is caused only postdictively. Electrocardiographic analysis revealed that the two experimental conditions induced different responses in the autonomic nervous system, particularly in sympathetic nervous function, and that parasympathetic function correlated with postdictive timing. To account for the main findings, the discrepancy between the two time estimates is discussed in the light of timing strategies, i.e., prospective and retrospective timing, which reflect different emphasis on attention and memory processes. Also each timing method, i.e., the verbal estimation, production or comparative judgment, has different characteristics such as the quantification of duration in time units or knowledge of the target duration, which may be responsible for the discrepancy. The relationship between postdictive time estimation and the parasympathetic nervous system is also discussed.

ATM/RB1 mutations predict shorter overall survival in urothelial cancer.

Science.gov (United States)

Yin, Ming; Grivas, Petros; Emamekhoo, Hamid; Mendiratta, Prateek; Ali, Siraj; Hsu, JoAnn; Vasekar, Monali; Drabick, Joseph J; Pal, Sumanta; Joshi, Monika

2018-03-30

Mutations of DNA repair genes, e.g. ATM/RB1 , are frequently found in urothelial cancer (UC) and have been associated with better response to cisplatin-based chemotherapy. Further external validation of the prognostic value of ATM/RB1 mutations in UC can inform clinical decision making and trial designs. In the discovery dataset, ATM/RB1 mutations were present in 24% of patients and were associated with shorter OS (adjusted HR 2.67, 95% CI, 1.45-4.92, p = 0.002). There was a higher mutation load in patients carrying ATM/RB1 mutations (median mutation load: 6.7 versus 5.5 per Mb, p = 0.072). In the validation dataset, ATM/RB1 mutations were present in 22.2% of patients and were non-significantly associated with shorter OS (adjusted HR 1.87, 95% CI, 0.97-3.59, p = 0.06) and higher mutation load (median mutation load: 8.1 versus 7.2 per Mb, p = 0.126). Exome sequencing data of 130 bladder UC patients from The Cancer Genome Atlas (TCGA) dataset were analyzed as a discovery cohort to determine the prognostic value of ATM/RB1 mutations. Results were validated in an independent cohort of 81 advanced UC patients. Cox proportional hazard regression analysis was performed to calculate the hazard ratio (HR) and 95% confidence interval (CI) to compare overall survival (OS). ATM/RB1 mutations may be a biomarker of poor prognosis in unselected UC patients and may correlate with higher mutational load. Further studies are required to determine factors that can further stratify prognosis and evaluate predictive role of ATM/RB1 mutation status to immunotherapy and platinum-based chemotherapy.

Why shorter half-times of repair lead to greater damage in pulsed brachytherapy

International Nuclear Information System (INIS)

Fowler, J.F.

1993-01-01

Pulsed brachytherapy consists of replacing continuous irradiation at low dose-rate with a series of medium dose-rate fractions in the same overall time and to the same total dose. For example, pulses of 1 Gy given every 2 hr or 2 Gy given every 4 hr would deliver the same 70 Gy in 140 hr as continuous irradiation at 0.5 Gy/hr. If higher dose-rates are used, even with gaps between the pulses, the biological effects are always greater. Provided that dose rates in the pulse do not exceed 3 Gy/hr, and provided that pulses are given as often as every 2 hr, the inevitable increases of biological effect are no larger than a few percent (of biologically effective dose or extrapolated response dose). However, these increases are more likely to exceed 10% (and thus become clinically significant) if the half-time of repair of sublethal damage is short (less than 1 hr) rather than long. This somewhat unexpected finding is explained in detail here. The rise and fall of Biologically Effective Dose (and hence of Relative Effectiveness, for a constant dose in each pulse) is calculated during and after single pulses, assuming a range of values of T 1/2 , the half-time of sublethal damage repair. The area under each curve is proportional to Biologically Effective Dose and therefore to log cell kill. Pulses at 3 Gy/hr do yield greater biological effect (dose x integrated Relative Effectiveness) than lower dose-rate pulses or continuous irradiation at 0.5 Gy/hr. The contrast is greater for the short T 1/2 of 0.5 hr than for the longer T 1/2 of 1.5 hr. More biological damage will be done (compared with traditional low dose rate brachytherapy) in tissues with short T 1/2 (0.1-1 hr) than in tissues with longer T 1/2 values. 8 refs., 3 figs

Development of new ionic gelation strategy: Towards the preparation of new monodisperse and stable hyaluronic acid/β-cyclodextrin-grafted chitosan nanoparticles as drug delivery carriers for doxorubicin

Science.gov (United States)

Mihoub, Amina Ben; Saidat, Boubakeur; Bal, Youssef; Frochot, Céline; Vanderesse, Régis; Acherar, Samir

2018-03-01

In the present study, β-cyclodextrin-grafted chitosan nanoparticles (β-CD- g-CS NPs) were prepared using a new ionic gelation strategy involving a synergistic effect of NaCl (150 mmol/L), 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES, 10 mmol/L), and water bath sonication. This new strategy afforded smaller and more monodisperse β-CD- g-CS NPs vs. the classical ionic gelation method. New HA/β-CD- g-CS NPs were also prepared using the above-mentioned strategy by adding hyaluronic acid (HA) to the β-CD- g-CS copolymer at different weight ratios until the ZP values conversion. The best result was obtained with the weight ratio of w(HA): w(β-CD- g-CS) = 2:1 and furnished new spherical and smooth HA/β-CD- g-CS NPs. Furthermore, the stability of β- CD- g-CS NPs and HA/β-CD- g-CS NPs at 4°C in physiological medium (pH 7.4) was compared for 3 weeks period and showed that HA/β-CD- g-CS NPs were more stable all maintaining their monodispersity and high negative ZP values compared to β-CD- g-CS NPs. Finally, preliminary study of HA/β-CD- g-CS NPs as carrier for the controlled release of the anticancer drug doxorubicin was investigated. These new HA/β-CD- g-CS NPs can potentially be used as drug delivery and targeting systems for cancer treatment.

The effect of shorter exposure versus prolonged exposure on treatment outcome in Tourette syndrome and chronic tic disorders - an open trial.

Science.gov (United States)

van de Griendt, Jolande M T M; van Dijk, Maarten K; Verdellen, Cara W J; Verbraak, Marc J P M

2018-01-11

Exposure and response prevention has shown to be an effective strategy and is considered a first-line intervention in the behavioural treatment of tic disorders. Prior research demonstrated significant tic reduction after 12 two hour sessions. In this open trial, the question is addressed whether, relative to these prolonged sessions, exposure sessions of shorter duration yield differential outcome for patients with tic disorders. A total of 29 patients diagnosed with Tourette syndrome (TS) or chronic tic disorder were treated with shorter exposure sessions (1 h), and these data were compared to the data from a study about prolonged exposure (2 h, n = 21). Outcome was measured by the Yale Global Tic Severity Scale (YGTSS). Results suggest that after taking the difference in illness duration between the two groups into account, the effectiveness of shorter exposure sessions is not inferior to that of prolonged exposure. Results suggest that treatment with shorter exposure might be more efficient and more patients can be reached. Future research is needed to gain more insight into the mechanisms underlying the efficacy of behavioural treatments for tics.

Addition of sodium caseinate to skim milk increases nonsedimentable casein and causes significant changes in rennet-induced gelation, heat stability, and ethanol stability.

Science.gov (United States)

Lin, Yingchen; Kelly, Alan L; O'Mahony, James A; Guinee, Timothy P

2017-02-01

The protein content of skim milk was increased from 3.3 to 4.1% (wt/wt) by the addition of a blend of skim milk powder and sodium caseinate (NaCas), in which the weight ratio of skim milk powder to NaCas was varied from 0.8:0.0 to 0.0:0.8. Addition of NaCas increased the levels of nonsedimentable casein (from ∼6 to 18% of total casein) and calcium (from ∼36 to 43% of total calcium) and reduced the turbidity of the fortified milk, to a degree depending on level of NaCas added. Rennet gelation was adversely affected by the addition of NaCas at 0.2% (wt/wt) and completely inhibited at NaCas ≥0.4% (wt/wt). Rennet-induced hydrolysis was not affected by added NaCas. The proportion of total casein that was nonsedimentable on centrifugation (3,000 × g, 1 h, 25°C) of the rennet-treated milk after incubation for 1 h at 31°C increased significantly on addition of NaCas at ≥0.4% (wt/wt). Heat stability in the pH range 6.7 to 7.2 and ethanol stability at pH 6.4 were enhanced by the addition of NaCas. It is suggested that the negative effect of NaCas on rennet gelation is due to the increase in nonsedimentable casein, which upon hydrolysis by chymosin forms into small nonsedimentable particles that physically come between, and impede the aggregation of, rennet-altered para-casein micelles, and thereby inhibit the development of a gel network. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Preformulation and characterization of a lidocaine hydrochloride and dexamethasone sodium phosphate thermo-reversible and bioadhesive long-acting gel for intraperitoneal administration.

Science.gov (United States)

Arbelaez-Camargo, Diana; Suñé-Negre, Josep Maria; Roig-Carreras, Manel; García-Montoya, Encarna; Pérez-Lozano, Pilar; Miñarro-Carmona, Montserrat; Ticó-Grau, Josep Ramon

2016-02-10

The search for new formulations of anaesthetic agents that allow a localized administration and provide a prolonged effect is of great interest in the multimodal management of postoperative pain. The pre-formulation and characterization of a lidocaine and dexamethasone thermosensitive and bioadhesive long-acting gel for intraperitoneal administration was done as a tool in the management of pain in abdominal surgeries. The pre-formulation process was conducted by a systematic variation of the concentration of the different polymers, until setting it, in a suitable concentration that allowed an adequate gelation temperature. The poloxamer 407 (P407) was used as the main polymer; hydroxypropyl methylcellulose (HPMC) as the bioadhesive agent and polyvinyl pyrrolidone (PVP) to adjust the gelation temperature and physicochemical properties. The formulations were characterized by gelation temperature, pH, viscosity at 25°C and 37°C, gelation time, density and osmolality. Gelation temperature was decreased when increasing the concentration of hydroxypropyl methylcellulose and poloxamer 407, this effect was also observed when adding lidocaine hydrochloride and dexamethasone sodium phosphate to the formulations. The gelation temperature did not have statistically significant relation with the PVP concentration (P-value of 0.6797), even though, there is a tendency in the gelation temperature by varying it. Between the developed formulations, the 12.5/3.3/0.4% (P407/HPMC/PVP) formulation presents an appropriate gelation temperature, a suitable viscosity for administration by syringe, an adequate and stable pH and osmolality to prevent tissue damage and a correct gelation time that allowed the formation of a prolonged release implant. Copyright © 2015 Elsevier B.V. All rights reserved.

Moderate Exercise Allows for shorter Recovery Time in Critical Limb Ischemia

Directory of Open Access Journals (Sweden)

Anne Lejay

2017-07-01

Full Text Available Whether and how moderate exercise might allow for accelerated limb recovery in chronic critical limb ischemia (CLI remains to be determined. Chronic CLI was surgically induced in mice, and the effect of moderate exercise (training five times per week over a 3-week period was investigated. Tissue damages and functional scores were assessed on the 4th, 6th, 10th, 20th, and 30th day after surgery. Mice were sacrificed 48 h after the last exercise session in order to assess muscle structure, mitochondrial respiration, calcium retention capacity, oxidative stress and transcript levels of genes encoding proteins controlling mitochondrial functions (PGC1α, PGC1β, NRF1 and anti-oxidant defenses markers (SOD1, SOD2, catalase. CLI resulted in tissue damages and impaired functional scores. Mitochondrial respiration and calcium retention capacity were decreased in the ischemic limb of the non-exercised group (Vmax = 7.11 ± 1.14 vs. 9.86 ± 0.86 mmol 02/min/g dw, p < 0.001; CRC = 7.01 ± 0.97 vs. 11.96 ± 0.92 microM/mg dw, p < 0.001, respectively. Moderate exercise reduced tissue damages, improved functional scores, and restored mitochondrial respiration and calcium retention capacity in the ischemic limb (Vmax = 9.75 ± 1.00 vs. 9.82 ± 0.68 mmol 02/min/g dw; CRC = 11.36 ± 1.33 vs. 12.01 ± 1.24 microM/mg dw, respectively. Exercise also enhanced the transcript levels of PGC1α, PGC1β, NRF1, as well as SOD1, SOD2, and catalase. Moderate exercise restores mitochondrial respiration and calcium retention capacity, and it has beneficial functional effects in chronic CLI, likely by stimulating reactive oxygen species-induced biogenesis and anti-oxidant defenses. These data support further development of exercise therapy even in advanced peripheral arterial disease.

N-Terminal Domains in Two-Domain Proteins Are Biased to Be Shorter and Predicted to Fold Faster Than Their C-Terminal Counterparts

Directory of Open Access Journals (Sweden)

Etai Jacob

2013-04-01

Full Text Available Computational analysis of proteomes in all kingdoms of life reveals a strong tendency for N-terminal domains in two-domain proteins to have shorter sequences than their neighboring C-terminal domains. Given that folding rates are affected by chain length, we asked whether the tendency for N-terminal domains to be shorter than their neighboring C-terminal domains reflects selection for faster-folding N-terminal domains. Calculations of absolute contact order, another predictor of folding rate, provide additional evidence that N-terminal domains tend to fold faster than their neighboring C-terminal domains. A possible explanation for this bias, which is more pronounced in prokaryotes than in eukaryotes, is that faster folding of N-terminal domains reduces the risk for protein aggregation during folding by preventing formation of nonnative interdomain interactions. This explanation is supported by our finding that two-domain proteins with a shorter N-terminal domain are much more abundant than those with a shorter C-terminal domain.

Monte Carlo simulation of non-linear free radical polymerization using a percolation kinetic gelation model (I): free radical homo polymerization

International Nuclear Information System (INIS)

Ghiass, M.; Dabir, B.; Nikazar, M.; Rey, A.D.; Mirzadeh, H.

2001-01-01

A kinetic gelation model that incorporates the kinetics of free radical homo polymerization is implemented to determine the effects of kinetics on polymerization statistics and microstructures. The simulation is performed on a simple cubic lattice that has 100 sites in each direction. A new algorithm for random selecting of the next step in a self-avoiding random walk and very efficient mechanisms of mobility of components are introduced to improve the generality of the predictions by removing commonly accruing deficiencies due to early trapping of radicals. A first order kinetics is considered for decomposition of initiator that enables us to consider the effect of temperature on polymerization reaction. Better understanding of microstructural evolution during polymerization and providing a framework to produce a realistic system of highly packed random chains within polymer network are among the benefits of model

Elastin Based Cell-laden Injectable Hydrogels with Tunable Gelation, Mechanical and Biodegradation Properties

Science.gov (United States)

Fathi, Ali; Mithieux, Suzanne M.; Wei, Hua; Chrzanowski, Wojciech; Valtchev, Peter; Weiss, Anthony S.; Dehghani, Fariba

2015-01-01

Injectable hydrogels made from extracellular matrix proteins such as elastin show great promise for various biomedical applications. Use of cytotoxic reagents, fixed gelling behavior, and lack of mechanical strength in these hydrogels are the main associated drawbacks. The aim of this study was to develop highly cytocompatible and injectable elastin-based hydrogels with alterable gelation characteristics, favorable mechanical properties and structural stability for load bearing applications. A thermoresponsive copolymer, poly(N-isopropylacrylamide-co-polylactide-2-hydroxyethyl methacrylate-co-oligo(ethylene glycol)monomethyl ether methacrylate, was functionalized with succinimide ester groups by incorporating N-acryloxysuccinimide monomer. These ester groups were exploited to covalently bond this polymer, denoted as PNPHO, to different proteins with primary amine groups such as α-elastin in aqueous media. The incorporation of elastin through covalent bond formation with PNPHO promotes the structural stability, mechanical properties and live cell proliferation within the structure of hydrogels. Our results demonstrated that elastin-co-PNPHO solutions were injectable through fine gauge needles and converted to hydrogels in situ at 37 °C in the absence of any crosslinking reagent. By altering PNPHO content, the gelling time of these hydrogels can be finely tuned within the range of 2 to 15 min to ensure compatibility with surgical requirements. In addition, these hydrogels exhibited compression moduli in the range of 40 to 145 kPa, which are substantially higher than those of previously developed elastin-based hydrogels. These hydrogels were highly stable in the physiological environment with the evidence of 10 wt% mass loss in 30 days of incubation in a simulated environment. This class of hydrogels is in vivo bioabsorbable due to the gradual increase of the lower critical solution temperature of the copolymer to above 37 °C due to the cleavage of polylactide from

Encapsulating anthocyanins from Hibiscus sabdariffa L. calyces by ionic gelation: Pigment stability during storage of microparticles.

Science.gov (United States)

de Moura, Sílvia C S R; Berling, Carolina L; Germer, Sílvia P M; Alvim, Izabela D; Hubinger, Míriam D

2018-02-15

Hibiscus extract (HE) has a strong antioxidant activity and high anthocyanin content; it can be used as a natural pigment, also adding potential health benefits. The objective of this work was the microencapsulation of HE anthocyanin by ionic gelation (IG) using two techniques: dripping-extrusion and atomization, both by means of a double emulsion (HE/rapseed oil/pectin) and a cross-linked solution (CaCl 2 ). Particles (77-83% moisture content) were conditioned in acidified solution at 5, 15 and 25°C, absence of light, and evaluated for anthocyanins and color for 50-days. The median diameter (D 50 ) of the particles ranged from 78 to 1100μm and encapsulation efficiency ranged from 67.9 to 93.9%. The encapsulation caused higher temperature stability compared with the free extract. The half-life (t 1/2 ) values of the particles ranged from 7 (25°C) to 180days (5°C) for anthocyanins and from 25 (25°C) to 462days (5°C) for Chroma value. The IG increased the stability of HE anthocyanin. Both the dripping-extrusion and the atomization have shown to be feasible techniques. Copyright © 2017 Elsevier Ltd. All rights reserved.

Coupling the Alkaline-Surfactant-Polymer Technology and The Gelation Technology to Maximize Oil Production

Energy Technology Data Exchange (ETDEWEB)

Malcolm Pitts; Jie Qi; Dan Wilson; Phil Dowling; David Stewart; Bill Jones

2005-12-01

Performance and produced polymer evaluation of four alkaline-surfactant-polymer projects concluded that only one of the projects could have benefited from combining the alkaline-surfactant-polymer and gelation technologies. Cambridge, the 1993 Daqing, Mellott Ranch, and the Wardlaw alkaline-surfacant-polymer floods were studied. An initial gel treatment followed by an alkaline-surfactant-polymer flood in the Wardlaw field would have been a benefit due to reduction of fracture flow. Numerical simulation demonstrated that reducing the permeability of a high permeability zone of a reservoir with gel improved both waterflood and alkaline-surfactant-polymer flood oil recovery. A Minnelusa reservoir with both A and B sand production was simulated. A and B sands are separated by a shale layer. A sand and B sand waterflood oil recovery was improved by 196,000 bbls or 3.3% OOIP when a gel was placed in the B sand. Alkaline-surfactant-polymer flood oil recovery improvement over a waterflood was 392,000 bbls or 6.5% OOIP. Placing a gel into the B sand prior to an alkaline-surfactant-polymer flood resulted in 989,000 bbl or 16.4% OOIP more oil than only water injection. A sand and B sand alkaline-surfactant-polymer flood oil recovery was improved by 596,000 bbls or 9.9% OOIP when a gel was placed in the B sand.

Pre-hospital electrocardiogram triage with tele-cardiology support is associated with shorter time-to-balloon and higher rates of timely reperfusion even in rural areas: data from the Bari- Barletta/Andria/Trani public emergency medical service 118 registry on primary angioplasty in ST-elevation myocardial infarction.

Science.gov (United States)

Brunetti, Natale Daniele; Di Pietro, Gaetano; Aquilino, Ambrogio; Bruno, Angela I; Dellegrottaglie, Giulia; Di Giuseppe, Giuseppe; Lopriore, Claudio; De Gennaro, Luisa; Lanzone, Saverio; Caldarola, Pasquale; Antonelli, Gianfranco; Di Biase, Matteo

2014-09-01

We report the preliminary data from a regional registry on ST-elevation myocardial infarction (STEMI) patients treated with primary angioplasty in Apulia, Italy; the region is covered by a single public health-care service, a single public emergency medical service (EMS), and a single tele-medicine service provider. Two hundred and ninety-seven consecutive patients with STEMI transferred by regional free public EMS 1-1-8 for primary-PCI were enrolled in the study; 123 underwent pre-hospital electrocardiograms (ECGs) triage by tele-cardiology support and directly referred for primary-PCI, those remaining were just transferred by 1-1-8 ambulances for primary percutaneous coronary intervention (PCI) (diagnosis not based on tele-medicine ECG; already hospitalised patients, emergency-room without tele-medicine support). Time from first ECG diagnostic for STEMI to balloon was recorded; a time-to-balloon primary-PCI). Pre-hospital triage with tele-cardiology ECG in an EMS registry from an area with more than one and a half million inhabitants was associated with shorter time-to-balloon and higher rates of timely treated patients, even in 'rural' areas. © The European Society of Cardiology 2014.

Applicability of the shorter ‘Bangladesh regimen’ in high multidrug-resistant tuberculosis settings

Directory of Open Access Journals (Sweden)

Giovanni Sotgiu

2017-03-01

Full Text Available In spite of the recent introduction of two new drugs (delamanid and bedaquiline and a few repurposed compounds to treat multidrug-resistant and extensively drug-resistant tuberculosis (MDR- and XDR-TB, clinicians are facing increasing problems in designing effective regimens in severe cases. Recently a 9 to 12-month regimen (known as the ‘Bangladesh regimen’ proved to be effective in treating MDR-TB cases. It included an initial phase of 4 to 6 months of kanamycin, moxifloxacin, prothionamide, clofazimine, pyrazinamide, high-dose isoniazid, and ethambutol, followed by 5 months of moxifloxacin, clofazimine, pyrazinamide, and ethambutol. However, recent evidence from Europe and Latin America identified prevalences of resistance to the first-line drugs in this regimen (ethambutol and pyrazinamide exceeding 60%, and of prothionamide exceeding 50%. Furthermore, the proportions of resistance to the two most important pillars of the regimen – quinolones and kanamycin – were higher than 40%. Overall, only 14 out of 348 adult patients (4.0% were susceptible to all of the drugs composing the regimen, and were therefore potentially suitable for the ‘shorter regimen’. A shorter, cheaper, and well-tolerated MDR-TB regimen is likely to impact the number of patients treated and improve adherence if prescribed to the right patients through the systematic use of rapid MTBDRsl testing.

Development and characterization of colloidal silica-based slow-release permanganate gel (SRP-G): laboratory investigations.

Science.gov (United States)

Lee, Eung Seok; Gupta, Neha

2014-08-01

Slow-release permanganate (MnO4(-)) gel (SRP-G) is a hyper-saline KMnO4 solution that can be used for treating large, dilute, or deep plumes of chlorinated solvents in groundwater. Ideally, the SRP-G injected into aquifers will slowly gelate to form MnO4(-) gel in situ, and the gel will slowly releases MnO4(-). Objectives of this study were to develop SRP-G using colloidal silica as gelling solution, characterize its gelation and release kinetics, and delineate its dynamics in a saturated sandy media. The SRP-G exhibited a two-phase increase in viscosity: a lag phase characterized by little increase in viscosity followed by a short gelation phase. Gelation lag times of SRP-G solutions increased (from 0.5h to 13d) with decreasing KMnO4 concentrations (from 25 to 8 g L(-1)). Permanganate release from gelated SRP-G increased with increasing KMnO4 concentrations, and was characterized as asymptotic release with initial peak (0.9-2.2 mg min(-1)) followed by more attenuated release. Gelation lag times of SRP-G flowing in sands (linear velocity=2.1md(-1)) increased (1, 3, and 6h) with decreasing KMnO4 concentrations (25.0, 23.0, and 22.9 g L(-1)). Permanganate release from gelated SRP-Gs continued for up to 3d and was characterized as asymptotic release with an initial peak release (∼1.2 g min(-1)) followed by more attenuated release over 70h. Dilution of SRP-G by dispersion in porous media affects gelation and release kinetics. Increasing the silica concentration in the SRP-G may facilitate gelation and extend the duration of MnO4(-) release from emplaced SRP-G in porous media. Copyright © 2014. Published by Elsevier Ltd.

Accelerated stress testing in a time-driven product development process

NARCIS (Netherlands)

Lu, Y.; Loh, H.T.; Brombacher, A.C.; Ouden, den P.H.

2000-01-01

In order to compete in the market, companies have to produce the right products with a shorter time to market and at lower costs than before. Shorter time to market requires the product development process (PDP) to change the way of working from the classical ‘wait and react’ to anticipating and

The association between post-traumatic stress disorder and shorter telomere length: A systematic review and meta-analysis.

Science.gov (United States)

Li, Xuemei; Wang, Jiang; Zhou, Jianghua; Huang, Pan; Li, Jiping

2017-08-15

Post-traumatic stress disorder (PTSD) is a common psychiatric disorder, which may accelerate aging. Many study have investigated the association between telomeres length and PTSD, but results from published studies are contradictory. Therefore, Meta-analysis approaches were conducted to give more precise estimate of relationship between telomere length and PTSD. We systematically reviewed the databases of PUBMED, PsycINFO, Medline(Ovid SP) and EMBASE for all articles on the association between telomere length and PTSD. Data were summarized by using random-effects in the meta-analysis. The heterogeneity among studies were examined by using Cochrane's Q statistic and I-squared. Five eligible studies containing 3851 participants were included in our meta-analysis. Shorten telomere length was significantly associated with PTSD with mean difference of -0.19( 95% CI: -0.27, -0.01; P<0.001) with I-square of 96%. The results from subgroup analysis demonstrated that shorter telomere length was significantly associated with PTSD across all gender groups, with mean difference of -0.15( 95% CI: -0.29, -0.01; P=0.04) for female, mean difference of -0.17( 95% CI: -0.19, -0.15; P<0.001) for male. Meanwhile, shorten telomere length was significantly associated with sexual assault(mean difference =-0.15, 95% CI: -0.29, -0.01), childhood trauma (mean difference =-0.08, 95% CI: -0.19, -0.07), but not combat (mean difference =-0.39, 95% CI: -0.83, 0.05). Compared to the individuals without PTSD, individuals with PTSD have shorter telomere length, which has implications for early intervention and timely treatment to prevent future adverse health outcomes. Copyright © 2017. Published by Elsevier B.V.

Shorter exposures to harder X-rays trigger early apoptotic events in Xenopus laevis embryos.

Directory of Open Access Journals (Sweden)

JiaJia Dong

Full Text Available BACKGROUND: A long-standing conventional view of radiation-induced apoptosis is that increased exposure results in augmented apoptosis in a biological system, with a threshold below which radiation doses do not cause any significant increase in cell death. The consequences of this belief impact the extent to which malignant diseases and non-malignant conditions are therapeutically treated and how radiation is used in combination with other therapies. Our research challenges the current dogma of dose-dependent induction of apoptosis and establishes a new parallel paradigm to the photoelectric effect in biological systems. METHODOLOGY/PRINCIPAL FINDINGS: We explored how the energy of individual X-ray photons and exposure time, both factors that determine the total dose, influence the occurrence of cell death in early Xenopus embryo. Three different experimental scenarios were analyzed and morphological and biochemical hallmarks of apoptosis were evaluated. Initially, we examined cell death events in embryos exposed to increasing incident energies when the exposure time was preset. Then, we evaluated the embryo's response when the exposure time was augmented while the energy value remained constant. Lastly, we studied the incidence of apoptosis in embryos exposed to an equal total dose of radiation that resulted from increasing the incoming energy while lowering the exposure time. CONCLUSIONS/SIGNIFICANCE: Overall, our data establish that the energy of the incident photon is a major contributor to the outcome of the biological system. In particular, for embryos exposed under identical conditions and delivered the same absorbed dose of radiation, the response is significantly increased when shorter bursts of more energetic photons are used. These results suggest that biological organisms display properties similar to the photoelectric effect in physical systems and provide new insights into how radiation-mediated apoptosis should be understood and

Comparison of setting time and temperature hydration in mortar with substituent ceramic

International Nuclear Information System (INIS)

Rodrigues, R.A.; Alves, L.S.; Evangelista, A.C.J.; Almeida, V.C.

2011-01-01

The workability of mortar is determined mainly by the kinetics of hydration of the hydraulic binder, the process of gelation / hydration of this material in aqueous solutions is significantly influenced by the presence of additives. As a result, this work aims at studying changes in setting time and temperature of hydration of mortars with 10, 15 and 30% of Portland cement replaced by residues of porcelain and ceramic bricks. The influence of these residues in the cement hydration process was studied by testing takes time, temperature, hydration and X-ray diffraction. The results indicate that the mortar setting time not changed significantly since the temperature of hydration has a minor variation on what is preferred because it reduces the microcracks created in mortar during drying.(author)

High lung cancer surgical procedure volume is associated with shorter length of stay and lower risks of re-admission and death

DEFF Research Database (Denmark)

Møller, Henrik; Riaz, Sharma P; Holmberg, Lars

2016-01-01

It is debated whether treating cancer patients in high-volume surgical centres can lead to improvement in outcomes, such as shorter length of hospital stay, decreased frequency and severity of post-operative complications, decreased re-admission, and decreased mortality. The dataset for this anal......It is debated whether treating cancer patients in high-volume surgical centres can lead to improvement in outcomes, such as shorter length of hospital stay, decreased frequency and severity of post-operative complications, decreased re-admission, and decreased mortality. The dataset...... to their geographical population. Higher volume hospitals had shorter length of stay and the odds of re-admission were 15% lower in the highest hospital volume quintile compared with the lowest quintile. Mortality risks were 1% after 30 d and 3% after 90 d. Patients from hospitals in the highest volume quintile had...

Construction time of PWRs

Energy Technology Data Exchange (ETDEWEB)

Carajilescov, Pedro; Moreira, Joao M.L., E-mail: pedro.carajilescov@ufabc.edu.b, E-mail: joao.moreira@ufabc.edu.b [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil). Center of Engineering, Modeling and Applied Social Sciences

2011-07-01

The cost of electricity generated by nuclear power is greatly affected by the capital cost, which is dependent on the construction time of the plant. This work analyses the construction time of PWRs in several countries with different market structure and licensing experience. Countries which succeeded to establish a more collaborative environment among utilities, constructors, regulators, and energy planners through effective partnerships were able to build PWRs in shorter times. The construction time in Germany, France and Russia was around 80 months and in Japan, about 60 months. The envelope of 95% of the cases includes a range between 50 and 250 months of construction time. The evaluations show that construction time of PWRs has been longer for countries that did not hold the technology to build their own reactors, and depended on contracts with foreign suppliers. The nominal power of the reactors was considered a measure of plant size, technology complexity and standardization. Countries with standardized reactor designs (France, Japan and Russia) were able to build plants in shorter times. (author)

Construction time of PWRs

International Nuclear Information System (INIS)

Carajilescov, Pedro; Moreira, Joao M.L.

2011-01-01

The cost of electricity generated by nuclear power is greatly affected by the capital cost, which is dependent on the construction time of the plant. This work analyses the construction time of PWRs in several countries with different market structure and licensing experience. Countries which succeeded to establish a more collaborative environment among utilities, constructors, regulators, and energy planners through effective partnerships were able to build PWRs in shorter times. The construction time in Germany, France and Russia was around 80 months and in Japan, about 60 months. The envelope of 95% of the cases includes a range between 50 and 250 months of construction time. The evaluations show that construction time of PWRs has been longer for countries that did not hold the technology to build their own reactors, and depended on contracts with foreign suppliers. The nominal power of the reactors was considered a measure of plant size, technology complexity and standardization. Countries with standardized reactor designs (France, Japan and Russia) were able to build plants in shorter times. (author)

The Effect of Various Acids to the Gelation Process to the Silica Gel Characteristic Using Organic Silica

Science.gov (United States)

Rahman, NA; Widiyastuti, W.; Sigit, D.; Ajiza, M.; Sujana, W.

2018-01-01

Bagasse ash is solid waste of cane sugar industry which contain of silica more than 51%. Some previous study of silica gel from bagasse ash have been conducted often and been applied. This study concerns about the effect of various acid used in the process of gelation to the characteristic of silica gel produced. Then, this silica gel will be used as adsorbent. As that, the silica gel must fulfill the requirements of adsorbent, as have good pores characteristics, fit in mesoporous size so that adsorbent diffusion process is not disturbed. A fitted pores size of silica gel can be prepared by managing acid concentration used. The effect of acid, organic acid (tartaric acid) and inorganic acid (hydrochloric acid), is investigated in detail. The acid is added into sodium silicate solution in that the gel is formed, the pores structures can be investigated with BET, the crystal form is analyzed with XRD and the pore structure is analyzed visually with SEM. By managing the acid concentration added, it gets the effect of acid to the pore structure of silica gel. The bigger concentration is, the bigger the pore’s size of silica gel produced.

An unprecedented amplification of near-infrared emission in a Bodipy derived π-system by stress or gelation.

Science.gov (United States)

Cherumukkil, Sandeep; Ghosh, Samrat; Praveen, Vakayil K; Ajayaghosh, Ayyappanpillai

2017-08-01

We report an unprecedented strategy to generate and amplify near-infrared (NIR) emission in an organic chromophore by mechanical stress or gelation pathways. A greenish-yellow emitting film of π-extended Bodipy-1 , obtained from n -decane, became orange-red upon mechanical shearing, with a 15-fold enhancement in NIR emission at 738 nm. Alternatively, a DMSO gel of Bodipy-1 exhibited a 7-fold enhancement in NIR emission at 748 nm with a change in emission color from yellow to orange-red upon drying. The reason for the amplified NIR emission in both cases is established from the difference in chromophore packing, by single crystal analysis of a model compound ( Bodipy-2 ), which also exhibited a near identical emission spectrum with red to NIR emission (742 nm). Comparison of the emission features and WAXS and FT-IR data of the sheared n -decane film and the DMSO xerogel with the single crystal data supports a head-to-tail slipped arrangement driven by the N-H···F-B bonding in the sheared or xerogel states, which facilitates strong exciton coupling and the resultant NIR emission.

Effects of rare sugar d-allulose on heat-induced gelation of surimi prepared from marine fish.

Science.gov (United States)

Ogawa, Masahiro; Inoue, Masaki; Hayakawa, Shigeru; O'Charoen, Siwaporn; Ogawa, Makiko

2017-11-01

d-Allulose (Alu), the C3-epimer of d-fructose, is a non-caloric sweetener (0.39 kcal g -1 ) with a suppressive effect on postprandial blood glucose elevation. The aim of this study was to investigate the effects of Alu used as a sweetener and gel improver instead of sucrose on heat-induced gelation of surimi. The puncture test of a heat-induced surimi gel showed that with 50 g kg -1 Alu the gel had 15% and 6% higher gel strength than the corresponding gel with sucrose (Suc) and with sorbitol (Sor), respectively. In addition, Alu-gel had 26% and 25% higher water-holding capacity (WHC) than Suc- and Sor-gel. Heating of myofibrillar protein with Alu, unlike Suc and Sor, facilitated the formation of both disulfide and non-disulfide crosslinks that might be associated with the mechanical properties and WHC of Alu-gel. Alu improves the mechanical properties and WHC of the heat-induced surimi gel. Furthermore, Alu is low in calories compared with Suc (4.0 kcal g -1 ) and Sor (3.0 kcal g -1 ). Thus Alu will be an alternative of Suc or Sor for developing surimi-based products with health benefits. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Shorter Fallow Cycles Affect the Availability of Noncrop Plant Resources in a Shifting Cultivation System

Directory of Open Access Journals (Sweden)

Sarah Paule. Dalle

2006-12-01

Full Text Available Shifting cultivation systems, one of the most widely distributed forms of agriculture in the tropics, provide not only crops of cultural significance, but also medicinal, edible, ritual, fuel, and forage resources, which contribute to the livelihoods, health, and cultural identity of local people. In many regions across the globe, shifting cultivation systems are undergoing important changes, one of the most pervasive being a shortening of the fallow cycle. Although there has been much attention drawn to declines in crop yields in conjunction with reductions in fallow times, little if any research has focused on the dynamics of noncrop plant resources. In this paper, we use a data set of 26 fields of the same age, i.e., ~1.5 yr, but differing in the length and frequency of past fallow cycles, to examine the impact of shorter fallow periods on the availability of noncrop plant resources. The resources examined are collected in shifting cultivation fields by the Yucatec Maya in Quintana Roo, Mexico. These included firewood, which is cut from remnant trees and stumps spared at the time of felling, and 17 forage species that form part of the weed vegetation. Firewood showed an overall decrease in basal area with shorter fallow cycles, which was mostly related to the smaller diameter of the spared stumps and trees in short-fallow milpas. In contrast, forage species showed a mixed response. Species increasing in abundance in short-fallow milpas tended to be short-lived herbs and shrubs often with weedy habits, whereas those declining in abundance were predominantly pioneer trees and animal-dispersed species. Coppicing tree species showed a neutral response to fallow intensity. Within the cultural and ecological context of our study area, we expect that declines in firewood availability will be most significant for livelihoods because of the high reliance on firewood for local fuel needs and the fact that the main alternative source of firewood, forest

The Glycated Albumin (GA) to HbA1c Ratio Reflects Shorter-Term Glycemic Control than GA: Analysis of Patients with Fulminant Type 1 Diabetes.

Science.gov (United States)

Koga, Masafumi; Inada, Shinya; Nakao, Taisei; Kawamori, Ryuzo; Kasayama, Soji

2017-01-01

Glycated albumin (GA) reflects shorter-term glycemic control than HbA1c. We have reported that HbA1c is paradoxically increased in diabetic patients whose glycemic control deteriorated before ameliorating. In this study, we analyzed paradoxical increases of glycemic control indicators after treatment in patients with fulminant type 1 diabetes (FT1D). We also investigated whether the GA/HbA1c ratio may reflect shorter-term glycemic control than GA. Five FT1D patients whose post-treatment HbA1c and GA levels were measured were enrolled. We also used a formula to estimate HbA1c and GA from the fictitious models of changes in plasma glucose in FT1D patients. In this model, the periods during which HbA1c, GA, and the GA/HbA1c ratio were higher than at the first visit were compared. In addition, the half-life for the GA/HbA1c ratio was calculated in accordance with the half-lives for HbA1c and GA (36 and 14 days, respectively). In all FT1D patients, HbA1c levels 2-4 weeks after treatment were increased, with three patients (60%) experiencing an increase of GA levels. In contrast, an increase of the GA/HbA1c ratio was observed in only one patient. In all of the different models of changes in plasma glucose in FT1D patients, the length of time during which the values were higher than at the first visit was in the order of HbA1c > GA > GA/HbA1c ratio. The half-life for the GA/HbA1c ratio was 9 days, shorter than GA. These findings suggest that the GA/HbA1c ratio reflects shorter-term glycemic control than GA. © 2016 Wiley Periodicals, Inc.

Making tomorrow's mistakes today: Evolutionary prototyping for risk reduction and shorter development time

Science.gov (United States)

Friedman, Gary; Schwuttke, Ursula M.; Burliegh, Scott; Chow, Sanguan; Parlier, Randy; Lee, Lorrine; Castro, Henry; Gersbach, Jim

1993-01-01

In the early days of JPL's solar system exploration, each spacecraft mission required its own dedicated data system with all software applications written in the mainframe's native assembly language. Although these early telemetry processing systems were a triumph of engineering in their day, since that time the computer industry has advanced to the point where it is now advantageous to replace these systems with more modern technology. The Space Flight Operations Center (SFOC) Prototype group was established in 1985 as a workstation and software laboratory. The charter of the lab was to determine if it was possible to construct a multimission telemetry processing system using commercial, off-the-shelf computers that communicated via networks. The staff of the lab mirrored that of a typical skunk works operation -- a small, multi-disciplinary team with a great deal of autonomy that could get complex tasks done quickly. In an effort to determine which approaches would be useful, the prototype group experimented with all types of operating systems, inter-process communication mechanisms, network protocols, packet size parameters. Out of that pioneering work came the confidence that a multi-mission telemetry processing system could be built using high-level languages running in a heterogeneous, networked workstation environment. Experience revealed that the operating systems on all nodes should be similar (i.e., all VMS or all PC-DOS or all UNIX), and that a unique Data Transport Subsystem tool needed to be built to address the incompatibilities of network standards, byte ordering, and socket buffering. The advantages of building a telemetry processing system based on emerging industry standards were numerous: by employing these standards, we would no longer be locked into a single vendor. When new technology came to market which offered ten times the performance at one eighth the cost, it would be possible to attach the new machine to the network, re-compile the

Making tomorrow's mistakes today: Evolutionary prototyping for risk reduction and shorter development time

Science.gov (United States)

Friedman, Gary; Schwuttke, Ursula M.; Burliegh, Scott; Chow, Sanguan; Parlier, Randy; Lee, Lorrine; Castro, Henry; Gersbach, Jim

1993-03-01

In the early days of JPL's solar system exploration, each spacecraft mission required its own dedicated data system with all software applications written in the mainframe's native assembly language. Although these early telemetry processing systems were a triumph of engineering in their day, since that time the computer industry has advanced to the point where it is now advantageous to replace these systems with more modern technology. The Space Flight Operations Center (SFOC) Prototype group was established in 1985 as a workstation and software laboratory. The charter of the lab was to determine if it was possible to construct a multimission telemetry processing system using commercial, off-the-shelf computers that communicated via networks. The staff of the lab mirrored that of a typical skunk works operation -- a small, multi-disciplinary team with a great deal of autonomy that could get complex tasks done quickly. In an effort to determine which approaches would be useful, the prototype group experimented with all types of operating systems, inter-process communication mechanisms, network protocols, packet size parameters. Out of that pioneering work came the confidence that a multi-mission telemetry processing system could be built using high-level languages running in a heterogeneous, networked workstation environment. Experience revealed that the operating systems on all nodes should be similar (i.e., all VMS or all PC-DOS or all UNIX), and that a unique Data Transport Subsystem tool needed to be built to address the incompatibilities of network standards, byte ordering, and socket buffering. The advantages of building a telemetry processing system based on emerging industry standards were numerous: by employing these standards, we would no longer be locked into a single vendor. When new technology came to market which offered ten times the performance at one eighth the cost, it would be possible to attach the new machine to the network, re-compile the

Association of mutations in the hemochromatosis gene with shorter life expectancy

DEFF Research Database (Denmark)

Bathum, L; Christiansen, L; Nybo, H

2001-01-01

BACKGROUND: To investigate whether the frequency of carriers of mutations in the HFE gene associated with hereditary hemochromatosis diminishes with age as an indication that HFE mutations are associated with increased mortality. It is of value in the debate concerning screening for hereditary...... hemochromatosis to determine the significance of heterozygosity. METHODS: Genotyping for mutations in exons 2 and 4 of the HFE gene using denaturing gradient gel electrophoresis in 1784 participants aged 45 to 100 years from 4 population-based studies: all 183 centenarians from the Danish Centenarian Study, 601...... in the distribution of mutations in exon 2 in the different age groups. CONCLUSIONS: In a high-carrier frequency population like Denmark, mutations in HFE show an age-related reduction in the frequency of heterozygotes for C282Y, which suggests that carrier status is associated with shorter life expectancy....

Single-Handed Helical Polybissilsesquioxane Nanotubes and Mesoporous Nanofibers Prepared by an External Templating Approach Using Low-Molecular-Weight Gelators

Directory of Open Access Journals (Sweden)

Jing Hu

2017-01-01

Full Text Available Chiral low-molecular-weight gelators (LMWGs derived from amino acids can self-assemble into helical fibers and twisted/coiled nanoribbons by H-bonding and π–π interaction. Silica nanotubes with single-handed helices have been prepared using chiral LMWGs through sol–gel transcription. Molecular-scale chirality exists at the inner surfaces. Here, we discuss single-handed helical aromatic ring-bridged polybissilsesquioxane nanotubes and mesoporous nanofibers prepared using chiral LMWGs. This review aims at describing the formation mechanisms of the helical nanostructures, the origination of optical activity, and the applications for other helical nanomaterial preparation, mainly based on our group’s results. The morphology and handedness can be controlled by changing the chirality and kinds of LMWGs and tuning the reaction conditions. The aromatic rings arrange in a partially crystalline structure. The optical activity of the polybissilsesquioxane nanotubes and mesoporous nanofibers originates from chiral defects, including stacking and twisting of aromatic groups, on the inner surfaces. They can be used as the starting materials for preparation of silica, silicon, carbonaceous, silica/carbon, and silicon carbide nanotubes.

Is equity confined to the shorter term projects - and if not, what does it need?

International Nuclear Information System (INIS)

Cryan, T.

1996-01-01

There are two types of equity investor generally found in shorter term energy projects: energy project developers or sponsors who view a given project as buying or building a business; and financial investors who have viewed an investment as buying a stream of cash flows. This article examines the objectives and needs of these two investor groups, and discusses the principal issues which govern their respective decision-making process. (author)

Untitled

Indian Academy of Sciences (India)

Sol-Gel Laboratory, Central Glass & Ceramic Research Institute, Calcutta 700 032, India. Abstract. Gelation times of tetraethyl orthosilicate-derived sols containing selected di- to tetravalent cations as ... polymers in sols, thereby accelerating gelation and (ii) hydrolyzed cations retarded the process by offering molecular ...

Defining Accelerometer Nonwear Time to Maximize Detection of Sedentary Time in Youth

DEFF Research Database (Denmark)

Cain, Kelli L; Bonilla, Edith; Conway, Terry L

2018-01-01

PURPOSE: The present study examined various accelerometer nonwear definitions and their impact on detection of sedentary time using different ActiGraph models, filters, and axes. METHODS: In total, 61 youth (34 children and 27 adolescents; aged 5-17 y) wore a 7164 and GT3X+ ActiGraph on a hip......), and GT3X+N (V and VM), and sedentary estimates were computed. RESULTS: The GT3X+LFE-VM was most sensitive to movement and could accurately detect observed sedentary time with the shortest nonwear definition of 20 minutes of consecutive "0" counts for children and 40 minutes for adolescents. The GT3X......+N-V was least sensitive to movement and required longer definitions to detect observed sedentary time (40 min for children and 90 min for adolescents). VM definitions were 10 minutes shorter than V definitions. LFE definitions were 40 minutes shorter than N definitions in adolescents. CONCLUSION: Different...

Shorter preschool, leukocyte telomere length is associated with obesity at age 9 in Latino children.

Science.gov (United States)

Kjaer, T W; Faurholt-Jepsen, D; Mehta, K M; Christensen, V B; Epel, E; Lin, J; Blackburn, E; Wojcicki, J M

2018-04-01

The aim of this study was to determine the potential role of leukocyte telomere length as a biomarker for development of childhood obesity in a low-income Latino population. A birth cohort of Latino children (N = 201) in San Francisco (recruited May 2006-May 2007) was followed until age 9 and assessed annually for obesity and dietary intake. Leukocyte telomere length was measured at 4 and 5 years (n = 102) and assessed as a predictor for obesity at age 9, adjusting for known risk factors. Furthermore, leukocyte telomere length at age 4 and 5 was evaluated as a possible mediator of the relationship between excessive sugar-sweetened beverage consumption and obesity at age 9. Shorter leukocyte telomere length in preschoolers was associated with obesity at age 9 (adjusted odds ratio 0.35, 95% confidence interval 0.13-0.94) after adjustment for known risk factors. Telomere length mediated 11% of the relationship between excessive sugar-sweetened beverage consumption and obesity. Shorter leukocyte telomere length may be an indicator of future obesity risk in high-risk populations as it is particularly sensitive to damage from oxidative stress exposure, including those from sugar-sweetened beverages. © 2017 World Obesity Federation.

Are Shorter Versions of the Positive and Negative Syndrome Scale (PANSS) Doable? A Critical Review.

Science.gov (United States)

Lindenmayer, Jean-Pierre

2017-12-01

The Positive and Negative Syndrome Scale (PANSS) is a well-established assessment tool for measuring symptom severity in schizophrenia. Researchers and clinicians have been interested in the development of a short version of the PANSS that could reduce the burden of its administration for patients and raters. The author presents a comprehensive overview of existing brief PANSS measures, including their strengths and limitations, and discusses some possible next steps. There are two available scales that offer a reduced number of original PANSS items: PANSS-14 and PANSS-19; and two shorter versions that include six items: Brief PANSS and PANSS-6. The PANSS-6 has been tested quite extensively in established trials and appears to demonstrate high sensitivity to change and an established cut off definition for remission. Prospective testing in new antipsychotic treatment trials is still required for these shorter versions of PANSS. In addition, they need to be supplemented with interview guides, as well as provide conversion formulas to translate total scores from the short PANSS versions to the PANSS-30. Both short versions of the PANSS are essentially designed to evaluate response to antipsychotic treatment. Future PANSS scale development needs to address specific measurement of treatment-responsive positive symptoms by including treatment-sensitive items, as well as illness-phase specific PANSS tools.

A novel method for the production of core-shell microparticles by inverse gelation optimized with artificial intelligent tools.

Science.gov (United States)

Rodríguez-Dorado, Rosalia; Landín, Mariana; Altai, Ayça; Russo, Paola; Aquino, Rita P; Del Gaudio, Pasquale

2018-03-01

Numerous studies have been focused on hydrophobic compounds encapsulation as oils. In fact, oils can provide numerous health benefits as synergic ingredient combined with other hydrophobic active ingredients. However, stable microparticles for pharmaceutical purposes are difficult to achieve when commonly techniques are used. In this work, sunflower oil was encapsulated in calcium-alginate capsules by prilling technique in co-axial configuration. Core-shell beads were produced by inverse gelation directly at the nozzle using a w/o emulsion containing aqueous calcium chloride solution in sunflower oil pumped through the inner nozzle while an aqueous alginate solution, coming out from the annular nozzle, produced the beads shell. To optimize process parameters artificial intelligence tools were proposed to optimize the numerous prilling process variables. Homogeneous and spherical microcapsules with narrow size distribution and a thin alginate shell were obtained when the parameters as w/o constituents, polymer concentrations, flow rates and frequency of vibration were optimized by two commercial software, FormRules® and INForm®, which implement neurofuzzy logic and Artificial Neural Networks together with genetic algorithms, respectively. This technique constitutes an innovative approach for hydrophobic compounds microencapsulation. Copyright © 2018 Elsevier B.V. All rights reserved.

Structural and thermo-rheological analysis of solutions and gels of a β-lactoglobulin fraction isolated from bovine whey.

Science.gov (United States)

Estévez, Natalia; Fuciños, Pablo; Bargiela, Verónica; Pastrana, Lorenzo; Tovar, Clara Asunción; Luisa Rúa, M

2016-05-01

A β-Lactoglobulin fraction (r-βLg) was isolated from milk whey hydrolysates produced with cardosins from Cynara cardunculus. The impact of the technological process on the r-βLg structure and how in turn this determined its heat-induced gelation was investigated. Results were analysed taking pure β-Lg (p-βLg) as control sample. The process induced changes in the r-βLg native conformation causing exposure of hydrophobic groups, lower thermal stability and also, shorter thermal treatments needed to give rise to non-native and aggregated species. At pH 3.2, r-βLg and p-βLg solutions exhibited two gelation steps, with the advantage that r-βLg protein may form stable gels at lower temperature than p-βLg. At pH 7.2, a specific thermo-viscoelastic stability to 73 °C was found, which corresponded to the gel point in both protein solutions. The difference was that while for p-βLg solution in sol state δ45° (fluid-like). Copyright © 2015 Elsevier Ltd. All rights reserved.

Minimally invasive oesophagectomy more expensive than open despite shorter length of stay.

Science.gov (United States)

Dhamija, Anish; Dhamija, Ankit; Hancock, Jacquelyn; McCloskey, Barbara; Kim, Anthony W; Detterbeck, Frank C; Boffa, Daniel J

2014-05-01

The minimally invasive oesophagectomy (MIO) approach offers a number of advantages over open approaches including reduced discomfort, shorter length of stay and a faster recovery to baseline status. On the other hand, minimally invasive procedures typically are longer and consume greater disposable instrumentation, potentially resulting in a greater overall cost. The objective of this study was to compare costs associated with various oesophagectomy approaches for oesophageal cancer. An institutional Resource Information Management System (RIMS) was queried for cost data relating to hospital expenditures (as opposed to billings or collections). The RIMS was searched for patients undergoing oesophagectomy for oesophageal cancer between 2003 and 2012 via minimally invasive, open transthoracic (OTT) (including Ivor Lewis, modified McKeown or thoracoabdominal) or transhiatal approaches. Patients that were converted from minimally invasive to open, or involved hybrid procedures, were excluded. A total of 160 oesophagectomies were identified, including 61 minimally invasive, 35 open transthoracic and 64 transhiatal. Costs on the day of surgery averaged higher in the MIO group ($12 476 ± 2190) compared with the open groups, OTT ($8202 ± 2512, P < 0.0001) or OTH ($5809 ± 2575, P < 0.0001). The median costs associated with the entire hospitalization also appear to be higher in the MIO group ($25 935) compared with OTT ($24 440) and OTH ($15 248). The average length of stay was lowest in the MIO group (11 ± 9 days) compared with OTT (19 ± 18 days, P = 0.006) and OTH (18 ± 28 days P = 0.07). The operative mortality was similar in the three groups (MIO = 3%, OTT = 9% and OTH = 3%). The operating theatre costs associated with minimally invasive oesophagectomy are significantly higher than OTT or OTH approaches. Unfortunately, a shorter hospital stay after MIO does not consistently offset higher surgical expense, as total hospital costs trend higher in the MIO patients. In

Access to Electric Light Is Associated with Shorter Sleep Duration in a Traditionally Hunter-Gatherer Community.

Science.gov (United States)

de la Iglesia, Horacio O; Fernández-Duque, Eduardo; Golombek, Diego A; Lanza, Norberto; Duffy, Jeanne F; Czeisler, Charles A; Valeggia, Claudia R

2015-08-01

Access to electric light might have shifted the ancestral timing and duration of human sleep. To test this hypothesis, we studied two communities of the historically hunter-gatherer indigenous Toba/Qom in the Argentinean Chaco. These communities share the same ethnic and sociocultural background, but one has free access to electricity while the other relies exclusively on natural light. We fitted participants in each community with wrist activity data loggers to assess their sleep-wake cycles during one week in the summer and one week in the winter. During the summer, participants with access to electricity had a tendency to a shorter daily sleep bout (43 ± 21 min) than those living under natural light conditions. This difference was due to a later daily bedtime and sleep onset in the community with electricity, but a similar sleep offset and rise time in both communities. In the winter, participants without access to electricity slept longer (56 ± 17 min) than those with access to electricity, and this was also related to earlier bedtimes and sleep onsets than participants in the community with electricity. In both communities, daily sleep duration was longer during the winter than during the summer. Our field study supports the notion that access to inexpensive sources of artificial light and the ability to create artificially lit environments must have been key factors in reducing sleep in industrialized human societies. © 2015 The Author(s).

Comprehensive borehole management for shorter drilling time; Umfassendes Bohrfortschrittsmanagement zur Verkuerzung der Bohrprojektdauer

Energy Technology Data Exchange (ETDEWEB)

Roehrlich, M. [ExxonMobil Production Deutschland GmbH, Hannover (Germany)

2007-09-13

In 2006, the trademarked ExxonMobil Fast Drill Process (FDP) was introduced also in the German ExxonMobil boreholes. The process is to maximize the drilling speed for every meter drilled. The process makes it possible to ensure borehole management on the basis of quantitative data and in consideration of all phases that are relevant for sinking a borehole. The FDP is used world-wide in all ExxonMobil drilling departments. More than 1.35 million meters are drilled annually in many different boreholes with different geological conditions, drilling profiles and international sites. The results were similar in many cases, with a significant increase in ROP and drill bit life, and with less damage caused by vibrations. FDP was developed on the basis of real time monitoring of the specific mechanical energy (MSE) required for drilling. MSE monitoring was found to be an effective tool dor detecting inefficient functioning of the drill bit and the overall system. To make operation more efficient, the causes must be identified and measures must be taken accordingly, taking into account the potential risks involved in such measures. MSE monitoring is a tool while FDPL is a broad management process ensuring that MSE and many other data sources are used effectively for optimisation of the ROP. Consequent implementation of the process resulted in a significant increase of the ROP. The major elements required for achieving this goal are discussed. (orig.)

A Swiss contribution to a secure LMFBR fuel cycle

International Nuclear Information System (INIS)

Nicolet, M.; Bischoff, K.; Hausmann, W.; Stofer, B.

1978-12-01

Since 1967, EIR has been using the sphere-pac fuel concept, which takes advantage of the wet route fabrication of (U,Pu) carbide-microspheres using an internal gelation method, followed by carbothermic reduction of the precipitated metal-oxides. Some of the promises of the wet process are a shorter fabrication route than for pellet manufacture, no dust problems, reduced fire hazard for carbides, and last but not least the improvement of Pu safeguards. The method is particularly suitable for direct coupling to a reprocessing plant, where coprocessing of both U and Pu and spiked solutions will be possible. (Auth.)

Intragastric Gelation of Heated Soy Protein Isolate-Alginate Mixtures and Its Effect on Sucrose Release.

Science.gov (United States)

Huang, Zhaozhi; Gruen, Ingolf; Vardhanabhuti, Bongkosh

2018-06-15

The goal of our study was to investigate the effect of alginate on in vitro gastric digestion and sucrose release of soy protein isolate (SPI) in model beverages. Model beverages containing 5% w/w SPI, 0% to 0.20% w/w alginate, and 10% w/w sucrose were prepared by heating the mixtures at 85 °C for 30 min at pH 6.0 or 7.0. Characterizations of beverages included determination of zeta potential, particle size and rheological properties. Digestion patterns and sucrose release profiles were determined during 2 hr in vitro gastric digestion using SDS-PAGE and HPLC analysis, respectively. Increasing alginate concentration led to increased negative surface charge, particle size, as well as viscosity and pseudoplastic behavior; however, no phase separation was observed. SPI beverages formed intragastric gel during in vitro gastric digestion when the formulations contained alginate or at pH 6.0 without alginate. Formation of the intragastric gel led to delayed protein digestion and release of sucrose. Higher resistance to digestion and a slower sucrose release rate were exhibited at increased alginate concentration, and to a lesser extent, at pH 6.0. This suggests that electrostatic interaction between SPI and alginate that occurred when the beverages were under gastric condition could be responsible for the intragastric gelation. These results could potentially lead to the formulation of SPI beverages with functionality to lower postprandial glycemic response. The results could be used to design beverages or semi solid food products with altered digestion properties and lowered or slower glucose release. © 2018 Institute of Food Technologists®.

Shorter Leukocyte Telomere Length in Relation to Presumed Nonalcoholic Fatty Liver Disease in Mexican-American Men in NHANES 1999–2002

Directory of Open Access Journals (Sweden)

Janet M. Wojcicki

2017-01-01

Full Text Available Leukocyte telomere length is shorter in response to chronic disease processes associated with inflammation such as diabetes mellitus and coronary artery disease. Data from the National Health and Nutrition Examination Survey (NHANES from 1999 to 2002 was used to explore the relationship between leukocyte telomere length and presumed NAFLD, as indicated by elevated serum alanine aminotransferase (ALT levels, obesity, or abdominal obesity. Logistic regression models were used to evaluate the relationship between telomere length and presumed markers of NAFLD adjusting for possible confounders. There was no relationship between elevated ALT levels, abdominal obesity, or obesity and telomere length in adjusted models in NHANES (OR 1.13, 95% CI 0.48–2.65; OR 1.17, 95% CI 0.52–2.62, resp.. Mexican-American men had shorter telomere length in relation to presumed NAFLD (OR 0.07, 95% CI 0.006–0.79 and using different indicators of NAFLD (OR 0.012, 95% CI 0.0006–0.24. Mexican origin with presumed NAFLD had shorter telomere length than men in other population groups. Longitudinal studies are necessary to evaluate the role of telomere length as a potential predictor to assess pathogenesis of NALFD in Mexicans.

Time versus frequency domain measurements: layered model ...

African Journals Online (AJOL)

... their high frequency content while among TEM data sets with low frequency content, the averaging times for the FEM ellipticity were shorter than the TEM quality. Keywords: ellipticity, frequency domain, frequency electromagnetic method, model parameter, orientation error, time domain, transient electromagnetic method

COUPLING THE ALKALINE-SURFACTANT-POLYMER TECHNOLOGY AND THE GELATION TECHNOLOGY TO MAXIMIZE OIL PRODUCTION

Energy Technology Data Exchange (ETDEWEB)

Malcolm Pitts; Jie Qui; Dan Wilson; Phil Dowling

2004-05-01

Gelation technologies have been developed to provide more efficient vertical sweep efficiencies for flooding naturally fractured oil reservoirs or more efficient areal sweep efficiency those with high permeability contrast ''thief zones''. The field proven alkaline-surfactant-polymer technology economically recovers 15% to 25% OOIP more oil than waterflooding in the swept pore space of an oil reservoir. However, alkaline-surfactant-polymer technology is not amenable to the naturally fractured reservoirs or those with thief zones because much of the injected solution bypasses the target pore space containing oil. The objective of this work is to investigate whether combining these two technologies could broaden the applicability of alkaline-surfactant-polymer flooding into these reservoirs. Fluid-fluid interaction with different gel chemical compositions and alkaline-surfactant-polymer solution with pH values ranging from 9.2 to 12.9 have been tested. Aluminum-polyacrylamide gels are not stable to alkaline-surfactant-polymer solutions at any pH. Chromium--polyacrylamide gels with polymer to chromium ion ratios of 25 or greater were stable to alkaline-surfactant-polymer solutions if solution pH was 10.6 or less. When the polymer to chromium ion was 15 or less, chromium-polyacrylamide gels were stable to alkaline-surfactant-polymer solutions with pH values up to 12.9. Chromium-xanthan gum gels were stable to alkaline-surfactant-polymer solutions with pH values of 12.9 at the polymer to chromium ion ratios tested. Silicate-polyacrylamide, resorcinol-formaldehyde, and sulfomethylated resorcinol-formaldehyde gels were also stable to alkaline-surfactant-polymer solutions with pH values ranging from 9.2 to 12.9. Iron-polyacrylamide gels were immediately destroyed when contacted with any of the alkaline-surfactant-polymer solutions with pH values of 9.2 to 12.9.

COUPLING THE ALKALINE-SURFACTANT-POLYMER TECHNOLOGY AND THE GELATION TECHNOLOGY TO MAXIMIZE OIL PRODUCTION

Energy Technology Data Exchange (ETDEWEB)

Malcolm Pitts; Jie Qi; Dan Wilson

2004-10-01

Gelation technologies have been developed to provide more efficient vertical sweep efficiencies for flooding naturally fractured oil reservoirs or more efficient areal sweep efficiency for those with high permeability contrast ''thief zones''. The field proven alkaline-surfactant-polymer technology economically recovers 15% to 25% OOIP more oil than waterflooding from swept pore space of an oil reservoir. However, alkaline-surfactant-polymer technology is not amenable to naturally fractured reservoirs or those with thief zones because much of injected solution bypasses target pore space containing oil. This work investigates whether combining these two technologies could broaden applicability of alkaline-surfactant-polymer flooding into these reservoirs. A prior fluid-fluid report discussed interaction of different gel chemical compositions and alkaline-surfactant-polymer solutions. Gel solutions under dynamic conditions of linear corefloods showed similar stability to alkaline-surfactant-polymer solutions as in the fluid-fluid analyses. Aluminum-polyacrylamide, flowing gels are not stable to alkaline-surfactant-polymer solutions of either pH 10.5 or 12.9. Chromium acetate-polyacrylamide flowing and rigid flowing gels are stable to subsequent alkaline-surfactant-polymer solution injection. Rigid flowing chromium acetate-polyacrylamide gels maintained permeability reduction better than flowing chromium acetate-polyacrylamide gels. Silicate-polyacrylamide gels are not stable with subsequent injection of either a pH 10.5 or a 12.9 alkaline-surfactant-polymer solution. Neither aluminum citrate-polyacrylamide nor silicate-polyacrylamide gel systems produced significant incremental oil in linear corefloods. Both flowing and rigid flowing chromium acetate-polyacrylamide gels produced incremental oil with the rigid flowing gel producing the greatest amount. Higher oil recovery could have been due to higher differential pressures across cores. None of

Is Alcohol Use Disorder Identification Test (AUDIT or its shorter versions more useful to identify risky drinkers in a Chinese population? A diagnostic study.

Directory of Open Access Journals (Sweden)

Benjamin H K Yip

Full Text Available To examine the diagnostic performance of shorter versions of Alcohol Use Disorder Identification Test (AUDIT, including Alcohol Consumption (AUDIT-C, in identifying risky drinkers in primary care settings using conventional performance measures, supplemented by decision curve analysis and reclassification table.A cross-sectional study of adult males in general outpatient clinics in Hong Kong. The study included only patients who reported at least sometimes drinking alcoholic beverages. Timeline follow back alcohol consumption assessment method was used as the reference standard. A Chinese translated and validated 10-item AUDIT (Ch-AUDIT was used as a screening tool of risky drinking.Of the participants, 21.7% were classified as risky drinkers. AUDIT-C has the best overall performance among the shorter versions of Ch-AUDIT. The AUC of AUDIT-C was comparable to Ch-AUDIT (0.898 vs 0.901, p-value = 0.959. Decision curve analysis revealed that when the threshold probability ranged from 15-30%, the AUDIT-C had a higher net-benefit than all other screens. AUDIT-C improved the reclassification of risky drinking when compared to Ch-AUDIT (net reclassification improvement = 0.167. The optimal cut-off of AUDIT-C was at ≥5.Given the rising levels of alcohol consumption in the Chinese regions, this Chinese translated 3-item instrument provides convenient and time-efficient risky drinking screening and may become an increasingly useful tool.

Cost-effectiveness of longer-term versus shorter-term provision of antibiotics in patients with persistent symptoms attributed to Lyme disease

NARCIS (Netherlands)

Berende, A.; Nieuwenhuis, L.; Hofstede, H.J.M. ter; Vos, F.J.; Vogelaar, M.L.; Tromp, M.A.; Middendorp, H. van; Donders, A.R.T.; Evers, A.W.M.; Kullberg, B.J.; Adang, E.M.M.

2018-01-01

BACKGROUND: The treatment of persistent symptoms attributed to Lyme disease remains controversial. Recently, the PLEASE study did not demonstrate any additional clinical benefit of longer-term versus shorter-term antibiotic treatment. However, the economic impact of the antibiotic strategies has not

Interstitial lung abnormalities in treatment-naïve advanced non-small-cell lung cancer patients are associated with shorter survival

Energy Technology Data Exchange (ETDEWEB)

Nishino, Mizuki, E-mail: Mizuki_Nishino@DFCI.HARVARD.EDU [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Department of Imaging, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215 (United States); Cardarella, Stephanie [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States); Dahlberg, Suzanne E. [Department of Biostatistics and Computational Biology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215 (United States); Araki, Tetsuro [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Lydon, Christine; Jackman, David M.; Rabin, Michael S. [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States); Hatabu, Hiroto [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Johnson, Bruce E. [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States)

2015-05-15

Highlights: • Interstitial lung abnormalities were present in 14% of stage IV NSCLC patients. • ILA was more common in older patients with heavier smoking history. • ILA was associated with shorter survival after adjusting for smoking and therapy. • ILA could be an additional independent marker for survival in advanced NSCLC. - Abstract: Objective: Interstitial lung diseases are associated with increased risk of lung cancer. The prevalence of ILA at diagnosis of advanced non-small-cell lung cancer (NSCLC) and its impact on overall survival (OS) remain to be investigated. Materials and method: The study included 120 treatment-naïve stage IV NSCLC patients (53 males, 67 females). ILA was scored on CT prior to any systemic therapy using a 4-point scale [0 = no evidence of ILA, 1 = equivocal for ILA, 2 = suspicious for ILA, 3 = ILA] by a sequential reading method previously reported. ILA scores of 2 or 3 indicated the presence of ILA. Results: ILA was present in 17 patients (14%) with advanced NSCLC prior to any treatment (score3: n = 2, score2: n = 15). These 17 patients were significantly older (median age: 69 vs. 63, p = 0.04) and had a heavier smoking history (median: 40 vs. 15.5 pack-year, p = 0.003) than those with ILA score 0 or 1. Higher ILA scores were associated with shorter OS (p = 0.001). Median OS of the 17 patients with ILA was 7.2 months [95%CI: 2.9–9.4] compared to 14.8 months [95%CI: 11.1–18.4] in patients with ILA score 0 or 1 (p = 0.002). In a multivariate model, the presence of ILA remained significant for increased risk for death (HR = 2.09, p = 0.028) after adjusting for first-line systemic therapy (chemotherapy, p < 0.001; TKI, p < 0.001; each compared to no therapy) and pack years of smoking (p = 0.40). Conclusion: Radiographic ILA was present in 14% of treatment-naïve advanced NSCLC patients. Higher ILA scores were associated with shorter OS, indicating that ILA could be a marker of shorter survival in advanced NSCLC.

Search times and probability of detection in time-limited search

Science.gov (United States)

Wilson, David; Devitt, Nicole; Maurer, Tana

2005-05-01

When modeling the search and target acquisition process, probability of detection as a function of time is important to war games and physical entity simulations. Recent US Army RDECOM CERDEC Night Vision and Electronics Sensor Directorate modeling of search and detection has focused on time-limited search. Developing the relationship between detection probability and time of search as a differential equation is explored. One of the parameters in the current formula for probability of detection in time-limited search corresponds to the mean time to detect in time-unlimited search. However, the mean time to detect in time-limited search is shorter than the mean time to detect in time-unlimited search and the relationship between them is a mathematical relationship between these two mean times. This simple relationship is derived.

Systemic lupus erythematosus and vitamin D deficiency are associated with shorter telomere length among African Americans: a case-control study.

Directory of Open Access Journals (Sweden)

Brett M Hoffecker

Full Text Available Systemic lupus erythematosus (SLE is a chronic systemic autoimmune disease that disproportionately affects African American females. The causes of SLE are unknown but postulated to be a combination of genetic predisposition and environmental triggers. Vitamin D deficiency is one of the possible environmental triggers. In this study we evaluated relationships between vitamin D status, cellular aging (telomere length and anti-telomere antibodies among African American Gullah women with SLE. The study population included African American female SLE patients and unaffected controls from the Sea Island region of South Carolina. Serum 25-hydroxyvitamin D levels were measured using a nonchromatographic radioimmunoassay. Telomere length was measured in genomic DNA of peripheral blood mononuclear cells (PBMCs by monochrome multiplex quantitative PCR. Anti-telomere antibody levels were measured by enzyme-linked immunosorbent assay (ELISA. Patients with SLE had significantly shorter telomeres and higher anti-telomere antibody titers compared to age- and gender-matched unaffected controls. There was a positive correlation between anti-telomere antibody levels and disease activity among patients and a significant correlation of shorter telomeres with lower 25-hydroxyvitamin D levels in both patients and controls. In follow-up examination of a subset of the patients, the patients who remained vitamin D deficient tended to have shorter telomeres than those patients whose 25-hydroxyvitamin D levels were repleted. Increasing 25-hydroxyvitamin D levels in African American patients with SLE may be beneficial in maintaining telomere length and preventing cellular aging. Moreover, anti-telomere antibody levels may be a promising biomarker of SLE status and disease activity.

Wake-up times following sedation with sevoflurane versus propofol after cardiac surgery.

Science.gov (United States)

Hellström, Jan; Öwall, Anders; Sackey, Peter V

2012-10-01

Intravenous sedation in the intensive care unit (ICU) may contribute to altered consciousness and prolonged mechanical ventilation. We tested the hypothesis that replacing intravenous propofol with inhaled sevoflurane for sedation after cardiac surgery would lead to shorter wake-up times, quicker patient cooperation, and less delusional memories. Following coronary artery bypass surgery with cardiopulmonary bypass, 100 patients were randomized to sedation with sevoflurane via the anesthetic conserving device or propofol. Study drugs were administered for a minimum of 2 hours until criteria for extubation were met. Primary endpoints were time from drug stop to extubation and to adequate verbal response. Secondary endpoints were adverse recovery events, memories reported in the ICU Memory Tool test, and ICU/hospital stay. Median time from drug stop to extubation (interquartile range/total range) was shorter after sevoflurane compared to propofol sedation; 10 (10/100) minutes versus 25 (21/240) minutes (p sedation after cardiac surgery leads to shorter wake-up times and quicker cooperation compared to propofol. No differences were seen in ICU-stay, adverse memories or recovery events in our short-term sedation.

Smoking Topography among Korean Smokers: Intensive Smoking Behavior with Larger Puff Volume and Shorter Interpuff Interval.

Science.gov (United States)

Kim, Sungroul; Yu, Sol

2018-05-18

The difference of smoker's topography has been found to be a function many factors, including sex, personality, nicotine yield, cigarette type (i.e., flavored versus non-flavored) and ethnicity. We evaluated the puffing behaviors of Korean smokers and its association with smoking-related biomarker levels. A sample of 300 participants was randomly recruited from metropolitan areas in South Korea. Topography measures during a 24-hour period were obtained using a CReSS pocket device. Korean male smokers smoked two puffs less per cigarette compared to female smokers (15.0 (13.0⁻19.0) vs. 17.5 (15.0⁻21.0) as the median (Interquartile range)), but had a significantly larger puff volume (62.7 (52.7⁻75.5) mL vs. 53.5 (42.0⁻64.2) mL); p = 0.012). The interpuff interval was similar between men and women (8.9 (6.5⁻11.2) s vs. 8.3 (6.2⁻11.0) s; p = 0.122) but much shorter than other study results. A dose-response association ( p = 0.0011) was observed between daily total puff volumes and urinary cotinine concentrations, after controlling for sex, age, household income level and nicotine addiction level. An understanding of the difference of topography measures, particularly the larger puff volume and shorter interpuff interval of Korean smokers, may help to overcome a potential underestimation of internal doses of hazardous byproducts of smoking.

At least 10% shorter C–H bonds in cryogenic protein crystal structures than in current AMBER forcefields

Energy Technology Data Exchange (ETDEWEB)

Pang, Yuan-Ping, E-mail: pang@mayo.edu

2015-03-06

High resolution protein crystal structures resolved with X-ray diffraction data at cryogenic temperature are commonly used as experimental data to refine forcefields and evaluate protein folding simulations. However, it has been unclear hitherto whether the C–H bond lengths in cryogenic protein structures are significantly different from those defined in forcefields to affect protein folding simulations. This article reports the finding that the C–H bonds in high resolution cryogenic protein structures are 10–14% shorter than those defined in current AMBER forcefields, according to 3709 C–H bonds in the cryogenic protein structures with resolutions of 0.62–0.79 Å. Also, 20 all-atom, isothermal–isobaric, 0.5-μs molecular dynamics simulations showed that chignolin folded from a fully-extended backbone formation to the native β-hairpin conformation in the simulations using AMBER forcefield FF12SB at 300 K with an aggregated native state population including standard error of 10 ± 4%. However, the aggregated native state population with standard error reduced to 3 ± 2% in the same simulations except that C–H bonds were shortened by 10–14%. Furthermore, the aggregated native state populations with standard errors increased to 35 ± 3% and 26 ± 3% when using FF12MC, which is based on AMBER forcefield FF99, with and without the shortened C–H bonds, respectively. These results show that the 10–14% bond length differences can significantly affect protein folding simulations and suggest that re-parameterization of C–H bonds according to the cryogenic structures could improve the ability of a forcefield to fold proteins in molecular dynamics simulations. - Highlights: • Cryogenic crystal structures are commonly used in computational studies of proteins. • C–H bonds in the cryogenic structures are shorter than those defined in forcefields. • A survey of 3709 C–H bonds shows that the cryogenic bonds are 10–14% shorter. • The

Reemission spectra and inelastic processes at interaction of attosecond and shorter duration electromagnetic pulses with atoms

International Nuclear Information System (INIS)

Makarov, D.N.; Matveev, V.I.

2017-01-01

Inelastic processes and the reemission of attosecond and shorter electromagnetic pulses by atoms have been considered within the analytical solution of the Schrödinger equation in the sudden perturbation approximation. A method of calculations with the exact inclusion of spatial inhomogeneity of the field of an ultrashort pulse and the momenta of photons in the reemission processes has been developed. The probabilities of inelastic processes and spectra of reemission of ultrashort electromagnetic pulses by one- and many-electron atoms have been calculated. The results have been presented in the form of analytical formulas.

Prospective and retrospective time perception are related to mental time travel: evidence from Alzheimer's disease.

Science.gov (United States)

El Haj, Mohamad; Moroni, Christine; Samson, Séverine; Fasotti, Luciano; Allain, Philippe

2013-10-01

Unlike prospective time perception paradigms, in which participants are aware that they have to estimate forthcoming time, little is known about retrospective time perception in normal aging and Alzheimer's disease (AD). Our paper addresses this shortcoming by comparing prospective and retrospective time estimation in younger adults, older adults, and AD patients. In four prospective tasks (lasting 30s, 60s, 90s, or 120s) participants were asked to read a series of numbers and to provide a verbal estimation of the reading time. In four other retrospective tasks, they were not informed about time judgment until they were asked to provide a verbal estimation of four elapsed time intervals (lasting 30s, 60s, 90s, or 120s). AD participants gave shorter verbal time estimations than older adults and younger participants did, suggesting that time is perceived to pass quickly in these patients. For all participants, the duration of the retrospective tasks was underestimated as compared to the prospective tasks and both estimations were shorter than the real time interval. Prospective time estimation was further correlated with mental time travel, as measured with the Remember/Know paradigm. Mental time travel was even higher correlated with retrospective time estimation. Our findings shed light on the relationship between time perception and the ability to mentally project oneself into time, two skills contributing to human memory functioning. Finally, time perception deficits, as observed in AD patients, can be interpreted in terms of dramatic changes occurring in frontal lobes and hippocampus. Copyright © 2013 Elsevier Inc. All rights reserved.

Use of a novel shorter minimum caliber needle for creating endoscopic tattoos for preoperative localization: a comparative ex vivo study.

Science.gov (United States)

Imai, Kenichiro; Hotta, Kinichi; Ito, Sayo; Yamaguchi, Yuichiro; Kawakami, Takeshi; Wada, Takuya; Igarashi, Kimihiro; Kishida, Yoshihiro; Kinugasa, Yusuke; Kawata, Noboru; Tanaka, Masaki; Kakushima, Naomi; Takizawa, Kohei; Ishiwatari, Hirotoshi; Matsubayashi, Hiroyuki; Ono, Hiroyuki

2017-06-01

In colorectal cancer surgery, inadvertent deep injections during endoscopic tattooing can cause India ink leakage into the peritoneum, leading to complications or to poor visualization of the surgical plane. This ex vivo animal study compared the use of novel shorter, minimum caliber needles versus conventional injection needles for endoscopic tattooing. Four endoscopists used the novel needles and conventional needles to make ten endoscopic tattoos (five tattoos/needle type/endoscopist) in harvested porcine rectum using a saline test-injection method. India ink leakage and the success of the tattoo (i. e. visible, tattoos but for none of the novel needle tattoos ( P  = 0.02). Tattoos created using the novel needles were more successful than those made with the conventional needles: 18/20 (90 %) vs. 11/20 (55 %); P  = 0.01. The use of novel shorter minimum caliber needles may be safe and effective for endoscopic tattooing for preoperative localization prior to colorectal cancer surgery.

MO-E-BRD-02: Accelerated Partial Breast Irradiation in Brachytherapy: Is Shorter Better?

International Nuclear Information System (INIS)

Todor, D.

2015-01-01

Is Non-invasive Image-Guided Breast Brachytherapy Good? – Jess Hiatt, MS Non-invasive Image-Guided Breast Brachytherapy (NIBB) is an emerging therapy for breast boost treatments as well as Accelerated Partial Breast Irradiation (APBI) using HDR surface breast brachytherapy. NIBB allows for smaller treatment volumes while maintaining optimal target coverage. Considering the real-time image-guidance and immobilization provided by the NIBB modality, minimal margins around the target tissue are necessary. Accelerated Partial Breast Irradiation in brachytherapy: is shorter better? - Dorin Todor, PhD VCU A review of balloon and strut devices will be provided together with the origins of APBI: the interstitial multi-catheter implant. A dosimetric and radiobiological perspective will help point out the evolution in breast brachytherapy, both in terms of devices and the protocols/clinical trials under which these devices are used. Improvements in imaging, delivery modalities and convenience are among the factors driving the ultrashort fractionation schedules but our understanding of both local control and toxicities associated with various treatments is lagging. A comparison between various schedules, from a radiobiological perspective, will be given together with a critical analysis of the issues. to review and understand the evolution and development of APBI using brachytherapy methods to understand the basis and limitations of radio-biological ‘equivalence’ between fractionation schedules to review commonly used and proposed fractionation schedules Intra-operative breast brachytherapy: Is one stop shopping best?- Bruce Libby, PhD. University of Virginia A review of intraoperative breast brachytherapy will be presented, including the Targit-A and other trials that have used electronic brachytherapy. More modern approaches, in which the lumpectomy procedure is integrated into an APBI workflow, will also be discussed. Learning Objectives: To review past and current

MO-E-BRD-02: Accelerated Partial Breast Irradiation in Brachytherapy: Is Shorter Better?

Energy Technology Data Exchange (ETDEWEB)

Todor, D. [Virginia Commonwealth University (United States)

2015-06-15

Is Non-invasive Image-Guided Breast Brachytherapy Good? – Jess Hiatt, MS Non-invasive Image-Guided Breast Brachytherapy (NIBB) is an emerging therapy for breast boost treatments as well as Accelerated Partial Breast Irradiation (APBI) using HDR surface breast brachytherapy. NIBB allows for smaller treatment volumes while maintaining optimal target coverage. Considering the real-time image-guidance and immobilization provided by the NIBB modality, minimal margins around the target tissue are necessary. Accelerated Partial Breast Irradiation in brachytherapy: is shorter better? - Dorin Todor, PhD VCU A review of balloon and strut devices will be provided together with the origins of APBI: the interstitial multi-catheter implant. A dosimetric and radiobiological perspective will help point out the evolution in breast brachytherapy, both in terms of devices and the protocols/clinical trials under which these devices are used. Improvements in imaging, delivery modalities and convenience are among the factors driving the ultrashort fractionation schedules but our understanding of both local control and toxicities associated with various treatments is lagging. A comparison between various schedules, from a radiobiological perspective, will be given together with a critical analysis of the issues. to review and understand the evolution and development of APBI using brachytherapy methods to understand the basis and limitations of radio-biological ‘equivalence’ between fractionation schedules to review commonly used and proposed fractionation schedules Intra-operative breast brachytherapy: Is one stop shopping best?- Bruce Libby, PhD. University of Virginia A review of intraoperative breast brachytherapy will be presented, including the Targit-A and other trials that have used electronic brachytherapy. More modern approaches, in which the lumpectomy procedure is integrated into an APBI workflow, will also be discussed. Learning Objectives: To review past and current

A characterization of persistence at short times in the WFC3/IR detector

Science.gov (United States)

Gennaro, M.; Bajaj, V.; Long, K.

2018-05-01

Persistence in the WFC3/IR detector appears to decay as a power law as a function of time elapsed since the end of a stimulus. In this report we study departures from the power law at times shorter than a few hundreds seconds after the stimulus. In order to have better short-time cadence, we use the Multiaccum (.ima) files, which trace the accumulated charge in the pixels as function of time, rather than the final pipeline products (.flt files), which instead report the electron rate estimated via a linear fit to the accumulated charge vs. time relation. We note that at short times after the stimulus, the absolute change in persistence is the strongest, thus a linear fit to the accumulated signal (the .flt values) can be a poor representation of the strongly varying persistence signal. The already observed power-law decay of the persistence signal, still holds at shorter times, with typical values of the power law index, gamma in [-0.8,-1] for stimuli that saturate the WFC3 pixels. To a good degree of approximation, a single power law is a good fit to the persistence signal decay from 100 to 5000 seconds. We also detect a tapering-off in the power-law decay at increasingly shorter times. This change in behavior is of the order of Delta Gamma 0.02 - 0.05 when comparing power-law fits performed to the persistence signal from 0 up to 250 seconds and from 0 up to 4000 seconds after the stimulus, indicating that persistence decays slightly more rapidly as time progresses. Our results may suggest that for even shorter times, not probed by our study, the WFC3 persistence signal might deviate from a single power-law model.

Coupling the Alkaline-Surfactant-Polymer Technology and The Gelation Technology to Maximize Oil Production

Energy Technology Data Exchange (ETDEWEB)

Malcolm Pitts; Jie Qi; Dan Wilson; Phil Dowling; David Stewart; Bill Jones

2005-12-01

Gelation technologies have been developed to provide more efficient vertical sweep efficiencies for flooding naturally fractured oil reservoirs or reservoirs with different sand lenses with high permeability contrast. The field proven alkaline-surfactant-polymer technology economically recovers 15% to 25% OOIP more crude oil than waterflooding from swept pore space of an oil reservoir. However, alkaline-surfactant-polymer technology is not amenable to naturally fractured reservoirs or reservoirs with high permeability contrast zones because much of injected solution bypasses target pore space containing oil. This work investigates whether combining these two technologies could broaden applicability of alkaline-surfactant-polymer flooding into these reservoirs. Fluid-fluid interaction with different gel chemical compositions and alkaline-surfactant-polymer solution with pH values ranging from 9.2 to 12.9 have been tested. Aluminum-polyacrylamide gels are not stable to alkaline-surfactant-polymer solutions at any pH. Chromium-polyacrylamide gels with polymer to chromium ion ratios of 25 or greater were stable to alkaline-surfactant-polymer solutions if solution pH was 10.6 or less. When the polymer to chromium ion was 15 or less, chromium-polyacrylamide gels were stable to alkaline-surfactant-polymer solutions with pH values up to 12.9. Chromium-xanthan gum gels were stable to alkaline-surfactant-polymer solutions with pH values of 12.9 at the polymer to chromium ion ratios tested. Silicate-polyacrylamide, resorcinol-formaldehyde, and sulfomethylated resorcinol-formaldehyde gels were also stable to alkaline-surfactant-polymer solutions with pH values ranging from 9.2 to 12.9. Iron-polyacrylamide gels were immediately destroyed when contacted with any of the alkaline-surfactant-polymer solutions with pH values ranging from 9.2 to 12.9. Gel solutions under dynamic conditions of linear corefloods showed similar stability to alkaline-surfactant-polymer solutions as in

Shorter daily dwelling time in peritoneal dialysis attenuates the epithelial-to-mesenchymal transition of mesothelial cells

Science.gov (United States)

2014-01-01

Background Peritoneal dialysis (PD) therapy is known to induce morphological and functional changes in the peritoneal membrane. Long-term exposure to conventional bio-incompatible dialysate and peritonitis is the main etiology of inflammation. Consequently, the peritoneal membrane undergoes structural changes, including angiogenesis, fibrosis, and hyalinizing vasculopathy, which ultimately results in technique failure. The epithelial-to-mesenchymal transition (EMT) of mesothelial cells (MCs) plays an important role during the above process; however, the clinical parameters associated with the EMT process of MCs remain to be explored. Methods To investigate the parameters impacting EMT during PD therapy, 53 clinical stable PD patients were enrolled. EMT assessments were conducted through human peritoneal MCs cultured from dialysate effluent with one consistent standard criterion (MC morphology and the expression of an epithelial marker, cytokeratin 18). The factors potentially associated with EMT were analyzed using logistic regression analysis. Primary MCs derived from the omentum were isolated for the in vitro study. Results Forty-seven percent of the patients presented with EMT, 28% with non-EMT, and 15% with a mixed presentation. Logistic regression analysis showed that patients who received persistent PD therapy (dwelling time of 24 h/day) had significantly higher EMT tendency. These results were consistent in vitro. Conclusions Dwelling time had a significant effect on the occurrence of EMT on MCs. PMID:24555732

The Rheology behind Stress-Induced Solidification in Native Silk Feedstocks.

Science.gov (United States)

Laity, Peter R; Holland, Chris

2016-10-29

The mechanism by which native silk feedstocks are converted to solid fibres in nature has attracted much interest. To address this question, the present work used rheology to investigate the gelation of Bombyx mori native silk feedstock. Exceeding a critical shear stress appeared to be more important than shear rate, during flow-induced initiation. Compositional changes (salts, pH etc.,) were not required, although their possible role in vivo is not excluded. Moreover, after successful initiation, gel strength continued to increase over a considerable time under effectively quiescent conditions, without requiring further application of the initial stimulus. Gelation by elevated temperature or freezing was also observed. Prior to gelation, literature suggests that silk protein adopts a random coil configuration, which argued against the conventional explanation of gelation, based on hydrophilic and hydrophobic interactions. Instead, a new hypothesis is presented, based on entropically-driven loss of hydration, which appears to explain the apparently diverse methods by which silk feedstocks can be gelled.

Obtention of hydrogels for use as water retainers in soil by gamma irradiation

International Nuclear Information System (INIS)

Burillo, G.; Ogawa, T.

1981-01-01

We have been studying for some time the radiation induced gelation of aqueous polyacrylamide solutions in order to clarify the relationships between the gel structure and gelation conditions. The application of hydrogels as water retainers has been reported previously by some workers and there exist some commercially produced hydrogels in the market, but their costs are not yet satisfactory for use on a large scale in the agricultural region in northern Mexico, where scarcity of water is always the serious problem. In this work, with an aim of obtaining hydrogels most economically, acrylamide, polyethylene oxide, and mixtures of water soluble polymers with acrylamide monomer, were irradiated in solid state under various conditions, in order to find the optimum conditions for gelation and to obtain the hydrogels most suitable as water retainers in soil. The relationships between the gelation, amount of water in the starting materials, molecular weights of polymers, effects of additives and the dose rates, were studied. (author)

The Rheology behind Stress-Induced Solidification in Native Silk Feedstocks

Directory of Open Access Journals (Sweden)

Peter R. Laity

2016-10-01

Full Text Available The mechanism by which native silk feedstocks are converted to solid fibres in nature has attracted much interest. To address this question, the present work used rheology to investigate the gelation of Bombyx mori native silk feedstock. Exceeding a critical shear stress appeared to be more important than shear rate, during flow-induced initiation. Compositional changes (salts, pH etc., were not required, although their possible role in vivo is not excluded. Moreover, after successful initiation, gel strength continued to increase over a considerable time under effectively quiescent conditions, without requiring further application of the initial stimulus. Gelation by elevated temperature or freezing was also observed. Prior to gelation, literature suggests that silk protein adopts a random coil configuration, which argued against the conventional explanation of gelation, based on hydrophilic and hydrophobic interactions. Instead, a new hypothesis is presented, based on entropically-driven loss of hydration, which appears to explain the apparently diverse methods by which silk feedstocks can be gelled.

Effect of extraction pH on heat-induced aggregation, gelation and microstructure of protein isolate from quinoa (Chenopodium quinoa Willd).

Science.gov (United States)

Ruiz, Geraldine Avila; Xiao, Wukai; van Boekel, Martinus; Minor, Marcel; Stieger, Markus

2016-10-15

The aim of this study was to determine the influence of extraction pH on heat-induced aggregation, gelation and microstructure of suspensions of protein isolates extracted from quinoa (Chenopodium quinoa Willd). Quinoa seed protein was extracted by alkaline treatment at various pH values (pH 8 (E8), 9 (E9), 10 (E10) and 11 (E11)), followed by acid precipitation. The obtained protein isolates were freeze dried. The protein isolates E8 and E9 resulted in a lower protein yield as well as less protein denaturation. These isolates also had a higher protein purity, more protein bands at higher molecular weights, and a higher protein solubility in the pH range of 3-4.5, compared to the isolates E10 and E11. Heating the 10%w/w protein isolate suspensions E8 and E9 led to increased aggregation, and semi-solid gels with a dense microstructure were formed. The isolate suspensions E10 and E11, on the other hand, aggregated less, did not form self-supporting gels and had loose particle arrangements. We conclude that extraction pH plays an important role in determining the functionality of quinoa protein isolates. Copyright © 2016 Elsevier Ltd. All rights reserved.

Buffering Capacity of Fast-Growing Species and Curing Time of UF Resin Modified With Zinc Borate and Monoammonium Phosphate

OpenAIRE

Izran Kamal; Koh M. Poh; Tan Y. Eng; Xue J. Ren; Zaidon Ashaari; Faizah Abood; Guenter Beyer; Khairul Masseat

2010-01-01

Problem statement: Occupying a suitable hot pressing time for particleboard fabrication seems very tricky for manufacturers of the wood-based panel. Longer or shorter pressing times can affect physical and mechanical properties of the produced particleboards and that is why extra care should be given on this matter. Longer pressing time can cause resin in a particleboard to over-cure whereas shorter pressing time can cause insufficient curing of the resin. Determination of hot pressing time i...

Alternative promoter usage generates novel shorter MAPT mRNA transcripts in Alzheimer's disease and progressive supranuclear palsy brains.

Science.gov (United States)

Huin, Vincent; Buée, Luc; Behal, Hélène; Labreuche, Julien; Sablonnière, Bernard; Dhaenens, Claire-Marie

2017-10-03

Alternative promoter usage is an important mechanism for transcriptome diversity and the regulation of gene expression. Indeed, this alternative usage may influence tissue/subcellular specificity, protein translation and function of the proteins. The existence of an alternative promoter for MAPT gene was considered for a long time to explain differential tissue specificity and differential response to transcription and growth factors between mRNA transcripts. The alternative promoter usage could explain partly the different tau proteins expression patterns observed in tauopathies. Here, we report on our discovery of a functional alternative promoter for MAPT, located upstream of the gene's second exon (exon 1). By analyzing genome databases and brain tissue from control individuals and patients with Alzheimer's disease or progressive supranuclear palsy, we identified novel shorter transcripts derived from this alternative promoter. These transcripts are increased in patients' brain tissue as assessed by 5'RACE-PCR and qPCR. We suggest that these new MAPT isoforms can be translated into normal or amino-terminal-truncated tau proteins. We further suggest that activation of MAPT's alternative promoter under pathological conditions leads to the production of truncated proteins, changes in protein localization and function, and thus neurodegeneration.

Cleavage of SNAP25 and its shorter versions by the protease domain of serotype A botulinum neurotoxin.

Directory of Open Access Journals (Sweden)

Rahman M Mizanur

Full Text Available Various substrates, catalysts, and assay methods are currently used to screen inhibitors for their effect on the proteolytic activity of botulinum neurotoxin. As a result, significant variation exists in the reported results. Recently, we found that one source of variation was the use of various catalysts, and have therefore evaluated its three forms. In this paper, we characterize three substrates under near uniform reaction conditions using the most active catalytic form of the toxin. Bovine serum albumin at varying optimum concentrations stimulated enzymatic activity with all three substrates. Sodium chloride had a stimulating effect on the full length synaptosomal-associated protein of 25 kDa (SNAP25 and its 66-mer substrates but had an inhibitory effect on the 17-mer substrate. We found that under optimum conditions, full length SNAP25 was a better substrate than its shorter 66-mer or 17-mer forms both in terms of kcat, Km, and catalytic efficiency kcat/Km. Assay times greater than 15 min introduced large variations and significantly reduced the catalytic efficiency. In addition to characterizing the three substrates, our results identify potential sources of variations in previous published results, and underscore the importance of using well-defined reaction components and assay conditions.

Discrimination in waiting times by insurance type and financial soundness of German acute care hospitals.

Science.gov (United States)

Schwierz, Christoph; Wübker, Achim; Wübker, Ansgar; Kuchinke, Björn A

2011-10-01

This paper shows that patients with private health insurance (PHI) are being offered significantly shorter waiting times than patients with statutory health insurance (SHI) in German acute hospital care. This behavior may be driven by the higher expected profitability of PHI relative to SHI holders. Further, we find that hospitals offering private insurees shorter waiting times when compared with SHI holders have a significantly better financial performance than those abstaining from or with less discrimination.

Towards shorter wavelength x-ray lasers using a high power, short pulse pump laser

International Nuclear Information System (INIS)

Tighe, W.; Krushelnick, K.; Valeo, E.; Suckewer, S.

1991-05-01

A near-terawatt, KrF* laser system, focussable to power densities >10 18 W/cm 2 has been constructed for use as a pump laser in various schemes aimed at the development of x-ray lasing below 5nm. The laser system along with output characteristics such as the pulse duration, the focal spot size, and the percentage of amplified spontaneous emission (ASE) emitted along with the laser pulse will be presented. Schemes intended to lead to shorter wavelength x-ray emission will be described. The resultant requirements on the pump laser characteristics and the target design will be outlined. Results from recent solid target experiments and two-laser experiments, showing the interaction of a high-power, short pulse laser with a preformed plasma, will be presented. 13 refs., 5 figs

Kinetics of microstructure formation of high-pressure induced gel from a whey protein isolate

Science.gov (United States)

He, Jin-Song; Yang, Hongwei; Zhu, Wanpeng; Mu, Tai-Hua

2010-03-01

The kinetic process of pressure-induced gelation of whey protein isolate (WPI) solutions was studied using in situ light scattering. The relationship of the logarithm of scattered light intensity (I) versus time (t) was linear after the induced time and could be described by the Cahn-Hilliard linear theory. With increasing time, the scattered intensity deviated from the exponential relationship, and the time evolution of the scattered light intensity maximum Im and the corresponding wavenumber qm could be described in terms of the power-law relationship as Im~fβ and qm~f-α, respectively. These results indicated that phase separation occurred during the gelation of WPI solutions under high pressure.

Facile synthesis of radial-like macroporous superparamagnetic chitosan spheres with in-situ co-precipitation and gelation of ferro-gels.

Directory of Open Access Journals (Sweden)

Chih-Hui Yang

Full Text Available Macroporous chitosan spheres encapsulating superparamagnetic iron oxide nanoparticles were synthesized by a facile and effective one-step fabrication process. Ferro-gels containing ferrous cations, ferric cations and chitosan were dropped into a sodium hydroxide solution through a syringe pump. In addition, a sodium hydroxide solution was employed for both gelation (chitosan and co-precipitation (ferrous cations and ferric cations of the ferro-gels. The results showed that the in-situ co-precipitation of ferro-ions gave rise to a radial morphology with non-spheroid macro pores (large cavities inside the chitosan spheres. The particle size of iron oxide can be adjusted from 2.5 nm to 5.4 nm by tuning the concentration of the sodium hydroxide solution. Using Fourier Transform Infrared Spectroscopy and X-ray diffraction spectra, the synthesized nanoparticles were illustrated as Fe(3O(4 nanoparticles. In addition, the prepared macroporous chitosan spheres presented a super-paramagnetic behaviour at room temperature with a saturation magnetization value as high as ca. 18 emu/g. The cytotoxicity was estimated using cell viability by incubating doses (0∼1000 µg/mL of the macroporous chitosan spheres. The result showed good viability (above 80% with alginate chitosan particles below 1000 µg/mL, indicating that macroporous chitosan spheres were potentially useful for biomedical applications in the future.

Postoperative radiotherapy in squamous cell carcinoma of the oral cavity: the importance of the overall treatment time

NARCIS (Netherlands)

Langendijk, J. A.; de Jong, M. A.; Leemans, C. R.; de Bree, R.; Smeele, L. E.; Doornaert, P.; Slotman, B. J.

2003-01-01

To test the hypothesis that (1) the distinction between intermediate- and high-risk patients by clustering different prognostic factors results in a significant difference in treatment outcome and (2) a shorter interval between surgery and radiotherapy and shorter overall treatment times of

Continuous Positive Airway Pressure Device Time to Procurement in a Disadvantaged Population

Directory of Open Access Journals (Sweden)

Lourdes M. DelRosso

2015-01-01

Full Text Available Introduction. The management of obstructive sleep apnea (OSA in patients who cannot afford a continuous positive airway pressure (CPAP device is challenging. In this study we compare time to CPAP procurement in three groups of patients diagnosed with OSA: uninsured subsidized by a humanitarian grant (Group 1, uninsured unsubsidized (Group 2, and those with Medicare or Medicaid (Group 3. We evaluate follow-up and adherence in Group 1. We hypothesize that additional factors, rather than just the ability to obtain CPAP, may uniquely affect follow-up and adherence in uninsured patients. Methods. 30 patients were in Groups 1 and 2, respectively. 12 patients were in Group 3. Time of CPAP procurement from OSA diagnosis to CPAP initiation was assessed in all groups. CPAP adherence data was collected for Group 1 patients at 1, 3, 6, and 9 months. Results. There were no significant differences between groups in gender, age, body mass index, or apnea hypopnea index. The mean time to procurement in Group 1 was shorter compared to Group 2 but not significant. Compared to both Group 1 and Group 2, Group 3 patients had significantly shorter times to device procurement. Conclusion. Time to procurement of CPAP was significantly shorter in those with Medicaid/Medicare insurance compared to the uninsured.

Discrimination of Urban Spaces with Different Level of Restorativeness Based on the Original and on a Shorter Version of Hartig et al.’s Perceived Restorativeness Scale

Directory of Open Access Journals (Sweden)

Fátima Negrín

2017-10-01

Full Text Available Restorativeness is defined as the potential of the environment to re-establish certain cognitive capacities related to human information processing. The most frequently used instrument for evaluating the restorativeness of places is the Perceived Restorativeness Scale, proposed by Hartig et al. (1991. Later on, shorter versions of the Perceived Restorativeness Scale were proposed. The aim of this work is to evaluate the discriminatory capacity of the original and of a shorter Spanish version of the PRS, considering urban settings previously selected for having different level of restorativeness, according to expert’s criteria. The study involved 244 students and used a 3 × 2 mixed experimental design, with two independent variables: Restorativeness of a place (between-subjects, which was manipulated by showing pictures of settings selected with varying levels of restorativeness (high, medium, low, and length of the scale (within-subjects, which was manipulated by asking subjects to fill in both the original and a shorter version of the PRS. The order of presentation of the two scales was counterbalanced. Results show an appropriate reliability for both version of the scale. Items of being-away, fascination, and coherence of the shorter scale correlate more strongly with the corresponding factor of the original scale, compared to the others factors. Both scales produce similar values for the perceived restorativeness of the different places, except for places with low restorativeness.

Control of Urania Crystallite Size by HMTA-Urea Reactions in the Internal Gelation Process for Preparing (U, Pu)O₂Fuel Kernels

Energy Technology Data Exchange (ETDEWEB)

Collins, J.L.

2005-04-26

In the development of (U,Pu)O{sub 2} kernels by the internal gelation process for the Direct Press Spheroidized process at Oak Ridge National Laboratory, a novel crystal growth step was discovered that made it possible to prepare calcined porous kernels that could be used as direct-press feed for Fast Breeder Reactor pellet fabrication. High-quality pellets were prepared that were near theoretical density and that (upon examination) revealed no evidence of sphere remnants. The controlled crystal growth step involved using hexamethylenetetramine (HMTA)-urea stock solutions that were boiled for 60 min or less. Before this discovery, all the other crystal growth steps (when utilized) could reduce the tap density to only {approx}1.3 g/cm{sup 3}, which was not sufficiently low for use in ideal pellet pressing. The use of the boiled HMTA-urea solution allowed the tap density to be lowered to 0.93 g/cm{sup 3}, with the ideal density being about 1.0 g/cm{sup 3}. This report describes the development of this technology and its scaleup.

Risky family processes prospectively forecast shorter telomere length mediated through negative emotions.

Science.gov (United States)

Brody, Gene H; Yu, Tianyi; Shalev, Idan

2017-05-01

This study was designed to examine prospective associations of risky family environments with subsequent levels of negative emotions and peripheral blood mononuclear cell telomere length (TL), a marker of cellular aging. A second purpose was to determine whether negative emotions mediate the hypothesized link between risky family processes and diminished telomere length. Participants were 293 adolescents (age 17 years at the first assessment) and their primary caregivers. Caregivers provided data on risky family processes when the youths were age 17 years, youths reported their negative emotions at age 18 years, and youths' TL was assayed from a blood sample at age 22 years. The results revealed that (a) risky family processes forecast heightened negative emotions (β = .316, p emotions forecast shorter TL (β = -.187, p = .012), and (c) negative emotions served as a mediator connecting risky family processes with diminished TL (indirect effect = -0.012, 95% CI [-0.036, -0.002]). These findings are consistent with the hypothesis that risky family processes presage premature cellular aging through effects on negative emotions, with potential implications for lifelong health. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Face to phase: pitfalls in time delay estimation from coherency phase

NARCIS (Netherlands)

Campfens, S.F.; van der Kooij, Herman; Schouten, Alfred Christiaan

2014-01-01

Coherency phase is often interpreted as a time delay reflecting a transmission delay between spatially separated neural populations. However, time delays estimated from corticomuscular coherency are conflicting and often shorter than expected physiologically. Recent work suggests that

Synthesis and characterization of an in situ forming hydrogel using tyramine conjugated high methoxyl gum tragacanth.

Science.gov (United States)

Tavakol, Moslem; Vasheghani-Farahani, Ebrahim; Mohammadifar, Mohammad Amin; Soleimani, Masoud; Hashemi-Najafabadi, Sameereh

2016-02-01

In this study, an enzyme catalyzed in situ forming hydrogel based on tyramine conjugated high methoxyl content gum tragacanth (TA-HMGT) was prepared and characterized. TA-HMGT was synthesized via heterogeneous ammonolysis of methyl ester groups of HMGT. Then, the hydrogel was prepared via horseradish peroxidase catalyzed coupling reaction in the presence of hydrogen peroxide. Hydrogel properties, such as gelation time, swelling/degradation behavior and rheological properties could be adjusted by tuning the gelation parameters and extent of tyramine conjugation. This system was a soft elastic hydrogel with appropriate biocompatibility. The fast gelation of the hydrogel is desirable for clinical applications. Also, in vitro bovine serum albumin release from the synthesized hydrogel showed good release profile with limited burst release. © The Author(s) 2015.

The effect of tonal changes on voice onset time in Mandarin esophageal speech.

Science.gov (United States)

Liu, Hanjun; Ng, Manwa L; Wan, Mingxi; Wang, Supin; Zhang, Yi

2008-03-01

The present study investigated the effect of tonal changes on voice onset time (VOT) between normal laryngeal (NL) and superior esophageal (SE) speakers of Mandarin Chinese. VOT values were measured from the syllables /pha/, /tha/, and /kha/ produced at four tone levels by eight NL and seven SE speakers who were native speakers of Mandarin. Results indicated that Mandarin tones were associated with significantly different VOT values for NL speakers, in which high-falling tone was associated with significantly shorter VOT values than mid-rising tone and falling-rising tone. Regarding speaker group, SE speakers showed significantly shorter VOT values than NL speakers across all tone levels. This may be related to their use of pharyngoesophageal (PE) segment as another sound source. SE speakers appear to take a shorter time to start PE segment vibration compared to NL speakers using the vocal folds for vibration.

Defibrillator charging before rhythm analysis significantly reduces hands-off time during resuscitation

DEFF Research Database (Denmark)

Hansen, L. K.; Folkestad, L.; Brabrand, M.

2013-01-01

BACKGROUND: Our objective was to reduce hands-off time during cardiopulmonary resuscitation as increased hands-off time leads to higher mortality. METHODS: The European Resuscitation Council (ERC) 2005 and ERC 2010 guidelines were compared with an alternative sequence (ALT). Pulseless ventricular...... physicians were included. All had prior experience in advanced life support. Chest compressions were shorter interrupted using ALT (mean, 6.7 vs 13.0 seconds). Analyzing data for ventricular tachycardia scenarios only, hands-off time was shorter using ALT (mean, 7.1 vs 18.2 seconds). In ERC 2010 vs ALT, 12...... physicians were included. Two physicians had not prior experience in advanced life support. Hands-off time was reduced using ALT (mean, 3.9 vs 5.6 seconds). Looking solely at ventricular tachycardia scenarios, hands-off time was shortened using ALT (mean, 4.5 vs 7.6 seconds). No significant reduction...

Kinetics of microstructure formation of high-pressure induced gel from a whey protein isolate

International Nuclear Information System (INIS)

He Jinsong; Yang Hongwei; Zhu Wanpeng; Mu Taihua

2010-01-01

The kinetic process of pressure-induced gelation of whey protein isolate (WPI) solutions was studied using in situ light scattering. The relationship of the logarithm of scattered light intensity (I) versus time (t) was linear after the induced time and could be described by the Cahn-Hilliard linear theory. With increasing time, the scattered intensity deviated from the exponential relationship, and the time evolution of the scattered light intensity maximum I m and the corresponding wavenumber q m could be described in terms of the power-law relationship as I m ∼f β and q m ∼f -α , respectively. These results indicated that phase separation occurred during the gelation of WPI solutions under high pressure.

Urdu translation and validation of shorter version of Positive Affect and Negative Affect Schedule (PANAS) on Pakistani bank employees.

Science.gov (United States)

Akhter, Noreen

2017-10-01

To translate, adapt and validate shorter version of positive affect and negative affect scale on Pakistani corporate employees. This cross-sectional study was conducted in the twin cities of Islamabad and Rawalpindi from October 2014 to December 2015. The study was completed into two independent parts. In part one, the scale was translated by forward translation. Then it was pilot-tested and administered on customer services employees from commercial banks and the telecommunication sector. Data of the pilot study was analysed by using exploratory factor analysis to extract the initial factor of positive affect and negative affect scale. Part two comprised the main study. Commercial bank employees were included in the sample using convenient sampling technique. Data of the main study was analysed using confirmatory factor analysis in order to establish construct validity of positive affect and negative affect scale. There were145 participants in the first part of the study and 495 in the second. Results of confirmatory factor analysis confirmed the two-factor structure of positive affect and negative affect scale suggesting that the scale has two distinct domains, i.e. positive affect and negative affect. The shorter version of positive affect and negative affect scale was found to be a valid and reliable measure.

Transmission time of a particle in the reflectionless Sech-squared potential: Quantum clock approach

International Nuclear Information System (INIS)

Park, Chang-Soo

2011-01-01

We investigate the time for a particle to pass through the reflectionless Sech-squared potential. Using the Salecker-Wigner and Peres quantum clock an average transmission time of a Gaussian wave packet representing the particle is explicitly evaluated in terms of average momentum and travel distance. The average transmission time is shown to be shorter than the time of free-particle motion and very close to the classical time for wave packets with well-localized momentum states. Since the clock measures the duration of scattering process the average transmission time can be interpreted as the average dwell time. -- Highlights: → We examine the scattering of a particle in the Sech-squared potential. → We use quantum clock to find an average transmission time. → It is very close to the classical time. → It is shorter than the time of free particle. → It is interpreted as the average dwell time.

42 CFR 137.78 - May a Self-Governance Tribe negotiate a funding agreement for a term longer or shorter than one...

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false May a Self-Governance Tribe negotiate a funding agreement for a term longer or shorter than one year? 137.78 Section 137.78 Public Health PUBLIC HEALTH... SERVICES TRIBAL SELF-GOVERNANCE Funding General § 137.78 May a Self-Governance Tribe negotiate a funding...

Effect of Group Exercising and Adjusting the Brace at Shorter Intervals on Cobb Angle and Quality of Life of Patients with Idiopathic Scoliosis

Directory of Open Access Journals (Sweden)

Zahra Hedayati

2016-01-01

Full Text Available Objective: Bracing along with exercising is the most effective protocol in patients with idiopathic scoliosis which have Cobb angles of 25 to 45 degrees. However, since the psychological aspects of scoliosis treatment may affect the quality of life, and the exact time for adjusting the pads of Milwaukee brace is unknown; Therefore the aim of this study was evaluating the effect of exercising in a group, with adjusting the brace in shorter intervals, in compare to routine protocol, in the treatment of idiopathic scoliosis. Matterials & Methods: Thirty-four patients with idiopathic scoliosis which had Cobb angles of 50 to 15 degrees were included in this study and were divided into experimental and control groups. The patients of two groups participated in an eleven-week treatment program, differ between the two groups. Quality of life scores of both groups were evaluated before and after intervention using SRS-22 questionnaire, as well as scoliosis angles before and after the intervention according to the primary and secondary radiographic X-rays. Results: Statistical analysis was performed using Paired T-Test in each group, and Independent T-Test between the two groups before and after treatment. The severity of scoliosis curvature and satisfaction domain of the experimental group was reduced significantly in compared with the control group, after intervention (P=0.04. Moreover in the case of  the quality of life in patients with Cobb angles less than 30 degrees, compared with patients with Cobb angles greater than 31 degrees, in the domains of self-image, satisfaction, and total score, the difference was significant (P<0.05. Conclusion: Adjusting the brace at shorter intervals along with exercising as a group, during the eleven weeks of treatment, has increased satisfaction and reduced the scoliosis Cobb angles of patients.

"Taller and Shorter": Human 3-D Spatial Memory Distorts Familiar Multilevel Buildings.

Directory of Open Access Journals (Sweden)

Thomas Brandt

Full Text Available Animal experiments report contradictory findings on the presence of a behavioural and neuronal anisotropy exhibited in vertical and horizontal capabilities of spatial orientation and navigation. We performed a pointing experiment in humans on the imagined 3-D direction of the location of various invisible goals that were distributed horizontally and vertically in a familiar multilevel hospital building. The 21 participants were employees who had worked for years in this building. The hypothesis was that comparison of the experimentally determined directions and the true directions would reveal systematic inaccuracy or dimensional anisotropy of the localizations. The study provides first evidence that the internal representation of a familiar multilevel building was distorted compared to the dimensions of the true building: vertically 215% taller and horizontally 51% shorter. This was not only demonstrated in the mathematical reconstruction of the mental model based on the analysis of the pointing experiments but also by the participants' drawings of the front view and the ground plan of the building. Thus, in the mental model both planes were altered in different directions: compressed for the horizontal floor plane and stretched for the vertical column plane. This could be related to human anisotropic behavioural performance of horizontal and vertical navigation in such buildings.

"Taller and Shorter": Human 3-D Spatial Memory Distorts Familiar Multilevel Buildings.

Science.gov (United States)

Brandt, Thomas; Huber, Markus; Schramm, Hannah; Kugler, Günter; Dieterich, Marianne; Glasauer, Stefan

2015-01-01

Animal experiments report contradictory findings on the presence of a behavioural and neuronal anisotropy exhibited in vertical and horizontal capabilities of spatial orientation and navigation. We performed a pointing experiment in humans on the imagined 3-D direction of the location of various invisible goals that were distributed horizontally and vertically in a familiar multilevel hospital building. The 21 participants were employees who had worked for years in this building. The hypothesis was that comparison of the experimentally determined directions and the true directions would reveal systematic inaccuracy or dimensional anisotropy of the localizations. The study provides first evidence that the internal representation of a familiar multilevel building was distorted compared to the dimensions of the true building: vertically 215% taller and horizontally 51% shorter. This was not only demonstrated in the mathematical reconstruction of the mental model based on the analysis of the pointing experiments but also by the participants' drawings of the front view and the ground plan of the building. Thus, in the mental model both planes were altered in different directions: compressed for the horizontal floor plane and stretched for the vertical column plane. This could be related to human anisotropic behavioural performance of horizontal and vertical navigation in such buildings.

TIA model is attainable in Wistar rats by intraluminal occlusion of the MCA for 10min or shorter.

Science.gov (United States)

Durukan Tolvanen, A; Tatlisumak, E; Pedrono, E; Abo-Ramadan, U; Tatlisumak, T

2017-05-15

Transient ischemic attack (TIA) has received only little attention in the experimental research field. Recently, we introduced a TIA model for mice, and here we set similar principles for simulating this human condition in Wistar rats. In the model: 1) transient nature of the event is ensured, and 2) 24h after the event animals are free from any sensorimotor deficit and from any detectable lesion by magnetic resonance imaging (MRI). Animals experienced varying durations of ischemia (5, 10, 12.5, 15, 25, and 30min, n=6-8pergroup) by intraluminal middle cerebral artery occlusion (MCAO). Ischemia severity and reperfusion rates were controlled by cerebral blood flow measurements. Sensorimotor neurological evaluations and MRI at 24h differentiated between TIA and ischemic stroke. Hematoxylin and eosin staining and apoptotic cell counts revealed pathological correlates of the event. We found that already 12.5min of ischemia was long enough to induce ischemic stroke in Wistar rats. Ten min or shorter durations induced neither gross neurological deficits nor infarcts visible on MRI, but histologically caused selective neuronal necrosis. A separate group of animals with 10min of ischemia followed up to 1week after reperfusion remained free of infarction and any MRI signal change. Thus, 10min or shorter focal cerebral ischemia induced by intraluminal MCAO in Wistar rats provides a clinically relevant TIA the rat. This model is useful for studying molecular correlates of TIA. Copyright © 2017 Elsevier B.V. All rights reserved.

Shorter epilepsy duration is associated with better seizure outcome in temporal lobe epilepsy surgery

Directory of Open Access Journals (Sweden)

Lucas Crociati Meguins

2015-03-01

Full Text Available Objective To investigate the influence of patient’s age and seizure onset on surgical outcome of temporal lobe epilepsy (TLE. Method A retrospective observational investigation performed from a cohort of patients from 2000 to 2012. Results A total of 229 patients were included. One-hundred and eleven of 179 patients (62% were classified as Engel I in the group with < 50 years old, whereas 33 of 50 (66% in the group with ≥ 50 years old group (p = 0.82. From those Engel I, 88 (61% reported epilepsy duration inferior to 10 years and 56 (39% superior to 10 years (p < 0.01. From the total of patients not seizure free, 36 (42% reported epilepsy duration inferior to 10 years and 49 (58% superior to 10 years (p < 0.01. Conclusion Patients with shorter duration of epilepsy before surgery had better postoperative seizure control than patients with longer duration of seizures.

Shorter Versus Longer Shift Durations to Mitigate Fatigue and Fatigue-Related Risks in Emergency Medical Services Personnel and Related Shift Workers: A Systematic Review

Science.gov (United States)

2018-01-11

Background: This study comprehensively reviewed the literature on the impact of shorter versus longer shifts on critical and important outcomes for Emergency Medical Services (EMS) personnel and related shift worker groups. Methods: Six databases (e....

Time profile of type 3 bursts in decameter and hectometer range

Science.gov (United States)

Takakura, T.; Naito, Y.; Ohki, K.

1973-01-01

The following new hypothesis is proposed. The decay time of plasma waves is much shorter than the time scale of type 3 bursts especially at low frequencies. Accordingly, the time variation of radio flux at a given frequency merely corresponds to the flux of fast electrons passing through the corresponding plasma layer.

Prenatal paracetamol exposure is associated with shorter anogenital distance in male infants

Science.gov (United States)

Fisher, B.G.; Thankamony, A.; Hughes, I.A.; Ong, K.K.; Dunger, D.B.; Acerini, C.L.

2016-01-01

STUDY QUESTION What is the relationship between maternal paracetamol intake during the masculinisation programming window (MPW, 8–14 weeks of gestation) and male infant anogenital distance (AGD), a biomarker for androgen action during the MPW? SUMMARY ANSWER Intrauterine paracetamol exposure during 8–14 weeks of gestation is associated with shorter AGD from birth to 24 months of age. WHAT IS ALREADY KNOWN The increasing prevalence of male reproductive disorders may reflect environmental influences on foetal testicular development during the MPW. Animal and human xenograft studies have demonstrated that paracetamol reduces foetal testicular testosterone production, consistent with reported epidemiological associations between prenatal paracetamol exposure and cryptorchidism. STUDY DESIGN, SIZE, DURATION Prospective cohort study (Cambridge Baby Growth Study), with recruitment of pregnant women at ~12 post-menstrual weeks of gestation from a single UK maternity unit between 2001 and 2009, and 24 months of infant follow-up. Of 2229 recruited women, 1640 continued with the infancy study after delivery, of whom 676 delivered male infants and completed a medicine consumption questionnaire. PARTICIPANTS/MATERIALS, SETTING, METHOD Mothers self-reported medicine consumption during pregnancy by a questionnaire administered during the perinatal period. Infant AGD (measured from 2006 onwards), penile length and testicular descent were assessed at 0, 3, 12, 18 and 24 months of age, and age-specific Z scores were calculated. Associations between paracetamol intake during three gestational periods (14 weeks) and these outcomes were tested by linear mixed models. Two hundred and twenty-five (33%) of six hundred and eighty-one male infants were exposed to paracetamol during pregnancy, of whom sixty-eight were reported to be exposed during 8–14 weeks. AGD measurements were available for 434 male infants. MAIN RESULTS AND THE ROLE OF CHANCE Paracetamol exposure during 8–14

Feasibility of a shorter Goal Attainment Scaling method for a pediatric spasticity clinic - The 3-milestones GAS.

Science.gov (United States)

Krasny-Pacini, A; Pauly, F; Hiebel, J; Godon, S; Isner-Horobeti, M-E; Chevignard, M

2017-07-01

Goal Attainment Scaling (GAS) is a method for writing personalized evaluation scales to quantify progress toward defined goals. It is useful in rehabilitation but is hampered by the experience required to adequately "predict" the possible outcomes relating to a particular goal before treatment and the time needed to describe all 5 levels of the scale. Here we aimed to investigate the feasibility of using GAS in a clinical setting of a pediatric spasticity clinic with a shorter method, the "3-milestones" GAS (goal setting with 3 levels and goal rating with the classical 5 levels). Secondary aims were to (1) analyze the types of goals children's therapists set for botulinum toxin treatment and (2) compare the score distribution (and therefore the ability to predict outcome) by goal type. Therapists were trained in GAS writing and prepared GAS scales in the regional spasticity-management clinic they attended with their patients and families. The study included all GAS scales written during a 2-year period. GAS score distribution across the 5 GAS levels was examined to assess whether the therapist could reliably predict outcome and whether the 3-milestones GAS yielded similar distributions as the original GAS method. In total, 541 GAS scales were written and showed the expected score distribution. Most scales (55%) referred to movement quality goals and fewer (29%) to family goals and activity domains. The 3-milestones GAS method was feasible within the time constraints of the spasticity clinic and could be used by local therapists in cooperation with the hospital team. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Kinetics of microstructure formation of high-pressure induced gel from a whey protein isolate

Energy Technology Data Exchange (ETDEWEB)

He Jinsong; Yang Hongwei; Zhu Wanpeng [Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084 (China); Mu Taihua, E-mail: mutaihuacaas@126.co [Institute of Agro-Food Science and Technology, Chinese Academy of Agricultural Sciences, Beijing 100094 (China)

2010-03-01

The kinetic process of pressure-induced gelation of whey protein isolate (WPI) solutions was studied using in situ light scattering. The relationship of the logarithm of scattered light intensity (I) versus time (t) was linear after the induced time and could be described by the Cahn-Hilliard linear theory. With increasing time, the scattered intensity deviated from the exponential relationship, and the time evolution of the scattered light intensity maximum I{sub m} and the corresponding wavenumber q{sub m} could be described in terms of the power-law relationship as I{sub m}{approx}f{sup {beta}} and q{sub m}{approx}f{sup -}{alpha}, respectively. These results indicated that phase separation occurred during the gelation of WPI solutions under high pressure.

Interpenetrating polymer networks based on cyanate ester and fluorinated ethynyl-terminated imide oligomers

Directory of Open Access Journals (Sweden)

Y. Wen

2017-12-01

Full Text Available Highly soluble fluorinated ethynyl-terminated imide (FETI oligomers were prepared via a conventional one-step method in m-cresol, using 4, 4′-(hexafluoroisopropylidene diphthalic anhydride and 2, 2′-bis(trifluoromethyl benzidine as the monomers, and ethynylphthalic anhydride as the end-capper; then interpenetrating polymer networks (IPN were formulated from FETI oligomers and bisphenol A dicyanate ester (BADCy through a solvent-free procedure, and their thermal, mechanical, and dielectric properties were fully characterized. The curing mechanism was studied by model reactions using nitrogen nuclear magnetic resonance. As evidenced by differential scanning calorimetry analysis and rheological measurements, the FETI/BADCy blends exhibited lower curing temperature and shorter gelation time in comparison with pure BADCy due to the catalytic effects of ethynyl and residue amic acid groups. The properties of IPNs were fully compared with those of polycyanurate, and the results revealed that the incorporation of FETI into cyanate ester resins could significantly improve the toughness, glass transition temperatures, mechanical and dielectric properties of the resultant IPNs.

Call-to-balloon time dashboard in patients with ST-segment elevation myocardial infarction results in significant improvement in the logistic chain.

Science.gov (United States)

Hermans, Maaike P J; Velders, Matthijs A; Smeekes, Martin; Drexhage, Olivier S; Hautvast, Raymond W M; Ytsma, Timon; Schalij, Martin J; Umans, Victor A W M

2017-08-04

Timely reperfusion with primary percutaneous coronary intervention (pPCI) in ST-segment elevation myocardial infarction (STEMI) patients is associated with superior clinical outcomes. Aiming to reduce ischaemic time, an innovative system for home-to-hospital (H2H) time monitoring was implemented, which enabled real-time evaluation of ischaemic time intervals, regular feedback and improvements in the logistic chain. The objective of this study was to assess the results after implementation of the H2H dashboard for monitoring and evaluation of ischaemic time in STEMI patients. Ischaemic time in STEMI patients transported by emergency medical services (EMS) and treated with pPCI in the Noordwest Ziekenhuis, Alkmaar before (2008-2009; n=495) and after the implementation of the H2H dashboard (2011-2014; n=441) was compared. Median time intervals were significantly shorter in the H2H group (door-to-balloon time 32 [IQR 25-43] vs. 40 [IQR 28-55] minutes, p-value dashboard was independently associated with shorter time delays. Real-time monitoring and feedback on time delay with the H2H dashboard improves the logistic chain in STEMI patients, resulting in shorter ischaemic time intervals.

Nation-Scale Adoption of Shorter Breast Radiation Therapy Schedules Can Increase Survival in Resource Constrained Economies: Results From a Markov Chain Analysis

Energy Technology Data Exchange (ETDEWEB)

Khan, Atif J., E-mail: atif.j.khan@rutgers.edu [Department of Radiation Oncology, Robert Wood Johnson Medical School/Cancer Institute of New Jersey, New Brunswick, New Jersey (United States); Rafique, Raza [Suleman Dawood School of Business, Lahore University of Management Sciences, Lahore (Pakistan); Zafar, Waleed [Shaukat Khanum Memorial Cancer Hospital and Research Centre, Lahore (Pakistan); Shah, Chirag [Department of Radiation Oncology, Cleveland Clinic, Cleveland, Ohio (United States); Haffty, Bruce G. [Department of Radiation Oncology, Robert Wood Johnson Medical School/Cancer Institute of New Jersey, New Brunswick, New Jersey (United States); Vicini, Frank [Michigan HealthCare Professionals, Farmington Hills, Michigan (United States); Jamshed, Arif [Shaukat Khanum Memorial Cancer Hospital and Research Centre, Lahore (Pakistan); Zhao, Yao [Rutgers University School of Business, Newark, New Jersey (United States)

2017-02-01

Purpose: Hypofractionated whole breast irradiation and accelerated partial breast irradiation (APBI) offer women options for shorter courses of breast radiation therapy. The impact of these shorter schedules on the breast cancer populations of emerging economies with limited radiation therapy resources is unknown. We hypothesized that adoption of these schedules would improve throughput in the system and, by allowing more women access to life-saving treatments, improve patient survival within the system. Methods and Materials: We designed a Markov chain model to simulate the different health states that a postlumpectomy or postmastectomy patient could enter over the course of a 20-year follow-up period. Transition rates between health states were adapted from published data on recurrence rates. We used primary data from a tertiary care hospital in Lahore, Pakistan, to populate the model with proportional use of mastectomy versus breast conservation and to estimate the proportion of patients suitable for APBI. Sensitivity analyses on the use of APBI and relative efficacy of APBI were conducted to study the impact on the population. Results: The shorter schedule resulted in more women alive and more women remaining without evidence of disease (NED) compared with the conventional schedule, with an absolute difference of about 4% and 7% at 15 years, respectively. Among women who had lumpectomies, the chance of remaining alive and with an intact breast was 62% in the hypofractionation model and 54% in the conventional fractionation model. Conclusions: Increasing throughput in the system can result in improved survival, improved chances of remaining without evidence of disease, and improved chances of remaining alive with a breast. These findings are significant and suggest that adoption of hypofractionation in emerging economies is not simply a question of efficiency and cost but one of access to care and patient survivorship.

Nation-Scale Adoption of Shorter Breast Radiation Therapy Schedules Can Increase Survival in Resource Constrained Economies: Results From a Markov Chain Analysis

International Nuclear Information System (INIS)

Khan, Atif J.; Rafique, Raza; Zafar, Waleed; Shah, Chirag; Haffty, Bruce G.; Vicini, Frank; Jamshed, Arif; Zhao, Yao

2017-01-01

Purpose: Hypofractionated whole breast irradiation and accelerated partial breast irradiation (APBI) offer women options for shorter courses of breast radiation therapy. The impact of these shorter schedules on the breast cancer populations of emerging economies with limited radiation therapy resources is unknown. We hypothesized that adoption of these schedules would improve throughput in the system and, by allowing more women access to life-saving treatments, improve patient survival within the system. Methods and Materials: We designed a Markov chain model to simulate the different health states that a postlumpectomy or postmastectomy patient could enter over the course of a 20-year follow-up period. Transition rates between health states were adapted from published data on recurrence rates. We used primary data from a tertiary care hospital in Lahore, Pakistan, to populate the model with proportional use of mastectomy versus breast conservation and to estimate the proportion of patients suitable for APBI. Sensitivity analyses on the use of APBI and relative efficacy of APBI were conducted to study the impact on the population. Results: The shorter schedule resulted in more women alive and more women remaining without evidence of disease (NED) compared with the conventional schedule, with an absolute difference of about 4% and 7% at 15 years, respectively. Among women who had lumpectomies, the chance of remaining alive and with an intact breast was 62% in the hypofractionation model and 54% in the conventional fractionation model. Conclusions: Increasing throughput in the system can result in improved survival, improved chances of remaining without evidence of disease, and improved chances of remaining alive with a breast. These findings are significant and suggest that adoption of hypofractionation in emerging economies is not simply a question of efficiency and cost but one of access to care and patient survivorship.

Less is more: latent learning is maximized by shorter training sessions in auditory perceptual learning.

Science.gov (United States)

Molloy, Katharine; Moore, David R; Sohoglu, Ediz; Amitay, Sygal

2012-01-01

The time course and outcome of perceptual learning can be affected by the length and distribution of practice, but the training regimen parameters that govern these effects have received little systematic study in the auditory domain. We asked whether there was a minimum requirement on the number of trials within a training session for learning to occur, whether there was a maximum limit beyond which additional trials became ineffective, and whether multiple training sessions provided benefit over a single session. We investigated the efficacy of different regimens that varied in the distribution of practice across training sessions and in the overall amount of practice received on a frequency discrimination task. While learning was relatively robust to variations in regimen, the group with the shortest training sessions (∼8 min) had significantly faster learning in early stages of training than groups with longer sessions. In later stages, the group with the longest training sessions (>1 hr) showed slower learning than the other groups, suggesting overtraining. Between-session improvements were inversely correlated with performance; they were largest at the start of training and reduced as training progressed. In a second experiment we found no additional longer-term improvement in performance, retention, or transfer of learning for a group that trained over 4 sessions (∼4 hr in total) relative to a group that trained for a single session (∼1 hr). However, the mechanisms of learning differed; the single-session group continued to improve in the days following cessation of training, whereas the multi-session group showed no further improvement once training had ceased. Shorter training sessions were advantageous because they allowed for more latent, between-session and post-training learning to emerge. These findings suggest that efficient regimens should use short training sessions, and optimized spacing between sessions.

Effect of uranyl nitrate and free acid concentration in feed solution of gelation on UO2 kernel quality

International Nuclear Information System (INIS)

Masduki, B.; Wardaya; Widarmoko, A.

1996-01-01

An investigation on the effect of uranium and free nitric acid concentration of uranyl nitrate as feed of gelation process on quality of UO 2 kernel was done.The investigation is to look for some concentration of uranyl nitrate solutions those are optimum as feed for preparation of gelled UO 3 . Uranyl nitrate solution of various concentration of uranium (450; 500; 550; 600; 650; 700 g/l) and free nitric acid of (0.9; 1.0; 1.1 N) was made into feed solutions by adding urea and HMTA with mole ratio of urea/uranium and HMTA/uranium 2.1 and 2.0. The feed solutions were changed into spherical gelled UO 3 by dropping was done to get the optimum concentrations of uranyl nitrate solutions. The gelled UO 3 was soaked and washed with 2.5% ammonia solution for 17 hours, dried at 70 o C, calcined at 350 o C for 3 hours then reduced at 850 o C for 3 hours. At every step of the steps process the colour and percentage of well product of gelled UO 3 were noticed. The density and O/U ratio of end product (UO 2 kernel) was determined, the percentage of well product of all steps process was also determined. The three factor were used to chose the optimum concentration of uranyl nitrate solution. From this investigation it was concluded that the optimum concentration of uranyl nitrate was 600 g/l uranium with free nitric acid 0,9 - 1,0 N, the percentage of well product was 97% density of 6.12 - 4.8 g/cc and O/U ratio of 2.15 - 2.06. (author)

Stabilization Mechanism of Roxithromycin Tablets under Gastric pH Conditions.

Science.gov (United States)

Inukai, Koki; Noguchi, Shuji; Kimura, Shin-Ichiro; Itai, Shigeru; Iwao, Yasunori

2018-05-31

Macrolide antibiotics are widely used at clinical sites. Clarithromycin (CAM), a 14-membered macrolide antibiotic, was reported to gelate under acidic conditions. Gelation allows oral administration of acid-sensitive CAM without enteric coating by hindering the penetration of gastric fluid into CAM tablets. However, it is unknown whether this phenomenon occurs in other macrolide antibiotics. In this study, we examined the gelation ability of three widely used macrolide antibiotics, roxithromycin (RXM), erythromycin A (EM), and azithromycin (AZM). The results indicated that not only CAM but also RXM gelated under acidic conditions. EM and AZM did not gelate under the same conditions. Gelation of RXM delayed the disintegration of the tablet and release of RXM from the tablet. Disintegration and release were also delayed in commercial RXM tablets containing disintegrants. This study showed that two of the four macrolides gelated, which affects tablet disintegration and dissolution and suggests that this phenomenon might also occur in other macrolides. Copyright © 2018. Published by Elsevier Inc.

Shorter preschool, leukocyte telomere length is associated with obesity at age 9 in Latino children

DEFF Research Database (Denmark)

Kjaer, Thora Wesenberg; Faurholt-Jepsen, D; Mehta, K M

2018-01-01

The aim of this study was to determine the potential role of leukocyte telomere length as a biomarker for development of childhood obesity in a low-income Latino population. A birth cohort of Latino children (N = 201) in San Francisco (recruited May 2006-May 2007) was followed until age 9...... and assessed annually for obesity and dietary intake. Leukocyte telomere length was measured at 4 and 5 years (n = 102) and assessed as a predictor for obesity at age 9, adjusting for known risk factors. Furthermore, leukocyte telomere length at age 4 and 5 was evaluated as a possible mediator...... of the relationship between excessive sugar-sweetened beverage consumption and obesity at age 9. Shorter leukocyte telomere length in preschoolers was associated with obesity at age 9 (adjusted odds ratio 0.35, 95% confidence interval 0.13-0.94) after adjustment for known risk factors. Telomere length mediated 11...

Travel time and concurrent-schedule choice: retrospective versus prospective control.

OpenAIRE

Davison, M; Elliffe, D

2000-01-01

Six pigeons were trained on concurrent variable-interval schedules in which two different travel times between alternatives, 4.5 and 0.5 s, were randomly arranged. In Part 1, the next travel time was signaled while the subjects were responding on each alternative. Generalized matching analyses of performance in the presence of the two travel-time signals showed significantly higher response and time sensitivity when the longer travel time was signaled compared to when the shorter time was sig...

Research of zirconia-based oxide spheres for CERMET fuel. Production through internal gelation process and the compatibility with Zr, Zircaloy-4 and Si

International Nuclear Information System (INIS)

Idemitsu, Kazuya; Inagaki, Yaohiro; Arima, Tatsumi

2003-05-01

Optimizing of sol-gel processes was carried out for manufacturing of ziroconium based oxide spheres used in CERMET fuels. In addition, compatibility of CERMET fuels was studied. The Zr 0.85-x Y 0.1 Er 0.05 Ce x O 2 (x=0.0-0.2) oxide spheres were made by preparation of suitable starting materials and the dropping method for an internal gelation process, and thorugh suitable drying, calcination and sintering processes. However, further studies were needed for optimizing the sintering condition. About the reaction of YSZ(yttria-stabilized zirconia) with Zr, Zry4 and Si, isothermal heating tests have been done at the temperature range from 800degC to 1150degC for a maximum of 112 days. Some reactions between YSZ and Zr were observed at temperatures ≥1000degC, which means the formation of a metallic reaction layer at the interface between them and the occurrence of meatallic phases inside the YSZ. Similar results were observed for the YSZ-Zry4 (cladding) system. The YSZ and Si were compatible below the temperature of 1000degC. However, above the temperatures, Si attacked YSZ so that the reaction layers formed on the YSZ side. (author)

Structure formation in pH-sensitive hydrogels composed of sodium caseinate and N,O-carboxymethyl chitosan.

Science.gov (United States)

Wei, Yanxia; Xie, Rui; Lin, Yanbin; Xu, Yunfei; Wang, Fengxia; Liang, Wanfu; Zhang, Ji

2016-08-01

The pH-sensitive hydrogels composed of sodium caseinate (SC) and N,O-carboxymethyl chitosan (NOCC) were prepared and a new method to characterize the gelation process was presented in this work. Reological tests suggested that RSC/NOCC=3/7 (the weight ratio of SC and NOCC) was the best ratio of hydrogel. The well-developed three-dimensional network structures in the hydrogel were confirmed by AFM. Two structural parameters, tIS and tCS, denoted as the initial and critical structure formation time, respectively, were used to provide an exact determination of the start of structure formation and description of gelation process. The gelation process strongly depended on temperature changes, a high temperature resulted in an early start of gelation. The non-kinetic model suggested the higher activation energy in the higher temperatures was disadvantageous to structure formation, and vice versa. Due to the smart gel reported here was very stable at room temperature, we believed that the gel is required for applications in drug delivery or could be exploited in the development of potential application as molecular switches in the future. Copyright © 2016 Elsevier B.V. All rights reserved.

Thiolated chitosan nanoparticles as an oral delivery system for Amikacin: in vitro and ex vivo evaluations.

Science.gov (United States)

Atyabi, F; Talaie, F; Dinarvand, R

2009-08-01

The purpose of this study was the synthesis of two thiol conjugated Chitosan polymers, and evaluation of the potential of Thiomer nanoparticle formulation as a carrier for oral delivery system. Mediated by EDAC (Ethylene-3-(3-di-methylaminopropyl)-carbodiimide), either N-acetyl Cysteine (NAC) or N-acetyl D-penicillamine (NAP) were covalently attached to Chitosan. The success of the synthesis was demonstrated by comparing FTIR spectra. Iodometric titration demonstrated that depending on the pH value of the synthesis medium, the Thiomers display 250 +/- 30 microMol and 300 +/- 20 microMol thiol groups per gram of polymer respectively. The interaction between mucin and Thiomers, compared to mucin and Chitosan was studied for assessment of mucoadhesion properties of synthesized polymers. This interaction was determined by the measurement of the amount of mucin adsorbed on Chitosan and the conjugated polymers. Rotating cylinder method demonstrated an average of 20 times improvement in mucoadhesion of Thiomers compared to the unmodified polymer. Chitosan and Thiomer nanoparticles were formulated by two methods; TPP and Sodium Sulfate gelation. SEM micrographs and data achieved by a Malvern nano/zetasizer show nanoparticles formed by TPP gelation have a mean size of 150 +/- 15 nm compared to 300 +/- 25 nm sized nanoparticles obtained by Sodium sulfate gelation. TPP gelation yields smaller, more spherical shaped nanoparticles with a smaller range of size distribution. Amikacin loaded nanoparticles with an average size of 280 nm were prepared by TPP gelation in which disulfide bond formation was achieved by a time dependent oxidation process. In vitro studies were carried out; a recovery rate of 33% and a drug entrapment of 25% were achieved. The amount of release was determined during 18 hr in a carefully prepared media. The permeation time across a biological membrane was observed to be about 150 minutes. Microbiological tests were carried out on two microorganisms

The Frugal Librarian: Thriving in Tough Economic Times

Science.gov (United States)

Smallwood, Carol, Ed.

2011-01-01

Fewer employees, shorter hours, diminished collection budgets, reduced programs and services--all at a time of record library usage. In this book, library expert Carol Smallwood demonstrates that despite the obvious downsides, the necessity of doing business differently can be positive, leading to partnering, sharing, and innovating. This…

In vitro evaluation of chitosan coated- and uncoated-calcium alginate beads containing methyl salicylate-lactose physical mixture.

Science.gov (United States)

Tamilvanan, S; Karmegam, S

2012-01-01

Methyl salicylate-lactose physical mixture (1:1 and 1:1.5 ratios) was incorporated into calcium alginate beads by a coacervation method involving an ionotropic gelation/polyelectrolyte complexation approach. This study aims to determine the influence of chitosan coating over the beads on drug entrapment efficiency (DEE) and release characteristics in artificial saliva compared to that of the uncoated beads. Changes in formulation parameters (gelation time, concentrations of Ca(2+) and alginate) resulted in decrease in DEE of chitosan-uncoated beads (p methyl salicylate-lactose physical mixture.

Influence of adding Sea Spaghetti seaweed and replacing the animal fat with olive oil or a konjac gel on pork meat batter gelation. Potential protein/alginate association.

Science.gov (United States)

Fernández-Martín, F; López-López, I; Cofrades, S; Colmenero, F Jiménez

2009-10-01

Standard and modulated differential scanning calorimetry (DSC, MDSC) and dynamic rheological thermal analysis (DRTA) were used to in situ simulate the batter gelation process. Texture profile analysis (TPA) and conventional quality evaluations were applied to processed products. Sea Spaghetti seaweed addition was highly effective at reinforcing water/oil retention capacity, hardness and elastic modulus in all formulations. Olive oil substituting half pork fat yielded a presumably healthier product with slightly better characteristics than control. A konjac-starch mixed gel replacing 70% of pork fat produced a similar product to control but with nearly 10% more water. DSC revealed the currently unknown phenomenon that Sea Spaghetti alginates apparently prevented thermal denaturation of a considerable protein fraction. MDSC confirmed that this mainly concerned non-reversing effects, and displayed glass transition temperatures in the range of 55-65°C. DRTA and TPA indicated however much stronger alginate-type gels. It is tentatively postulated that salt-soluble proteins associate athermally with seaweed alginates on heating to constitute a separate phase in a thermal composite-gelling process.

Potential barrier classification by short-time measurement

International Nuclear Information System (INIS)

Granot, Er'el; Marchewka, Avi

2006-01-01

We investigate the short-time dynamics of a delta-function potential barrier on an initially confined wave packet. There are mainly two conclusions: (A) At short times the probability density of the first particles that passed through the barrier is unaffected by it. (B) When the barrier is absorptive (i.e., its potential is imaginary) it affects the transmitted wave function at shorter times than a real potential barrier. Therefore, it is possible to distinguish between an imaginary and a real potential barrier by measuring its effect at short times only on the transmitting wave function

Potential barrier classification by short-time measurement

Science.gov (United States)

Granot, Er'El; Marchewka, Avi

2006-03-01

We investigate the short-time dynamics of a delta-function potential barrier on an initially confined wave packet. There are mainly two conclusions: (A) At short times the probability density of the first particles that passed through the barrier is unaffected by it. (B) When the barrier is absorptive (i.e., its potential is imaginary) it affects the transmitted wave function at shorter times than a real potential barrier. Therefore, it is possible to distinguish between an imaginary and a real potential barrier by measuring its effect at short times only on the transmitting wave function.

Perception of short time scale intervals in a hypnotic virtuoso

NARCIS (Netherlands)

Noreika, Valdas; Falter, Christine M.; Arstila, Valtteri; Wearden, John H.; Kallio, Sakari

2012-01-01

Previous studies showed that hypnotized individuals underestimate temporal intervals in the range of several seconds to tens of minutes. However, no previous work has investigated whether duration perception is equally disorderly when shorter time intervals are probed. In this study, duration

Greater reproductive investment, but shorter lifespan, in agrosystem than in natural-habitat toads

Directory of Open Access Journals (Sweden)

Francisco Javier Zamora-Camacho

2017-09-01

Full Text Available Global amphibian decline is due to several factors: habitat loss, anthropization, pollution, emerging diseases, and global warming. Amphibians, with complex life cycles, are particularly susceptible to habitat alterations, and their survival may be impaired in anthropized habitats. Increased mortality is a well-known consequence of anthropization. Life-history theory predicts higher reproductive investment when mortality is increased. In this work, we compared age, body size, and different indicators of reproductive investment, as well as prey availability, in natterjack toads (Epidalea calamita from agrosystems and adjacent natural pine groves in Southwestern Spain. Mean age was lower in agrosystems than in pine groves, possibly as a consequence of increased mortality due to agrosystem environmental stressors. Remarkably, agrosystem toads were larger despite being younger, suggesting accelerated growth rate. Although we detected no differences in prey availability between habitats, artificial irrigation could shorten aestivation in agrosystems, thus increasing energy trade. Moreover, agrosystem toads exhibited increased indicators of reproductive investment. In the light of life-history theory, agrosystem toads might compensate for lesser reproductive events—due to shorter lives—with a higher reproductive investment in each attempt. Our results show that agrosystems may alter demography, which may have complex consequences on both individual fitness and population stability.

Catalytic activity of acid and base with different concentration on sol-gel kinetics of silica by ultrasonic method.

Science.gov (United States)

Das, R K; Das, M

2015-09-01

The effects of both acid (acetic acid) and base (ammonia) catalysts in varying on the sol-gel synthesis of SiO2 nanoparticles using tetra ethyl ortho silicate (TEOS) as a precursor was determined by ultrasonic method. The ultrasonic velocity was received by pulsar receiver. The ultrasonic velocity in the sol and the parameter ΔT (time difference between the original pulse and first back wall echo of the sol) was varied with time of gelation. The graphs of ln[ln1/ΔT] vs ln(t), indicate two region - nonlinear region and a linear region. The time corresponds to the point at which the non-linear region change to linear region is considered as gel time for the respective solutions. Gelation time is found to be dependent on the concentration and types of catalyst and is found from the graphs based on Avrami equation. The rate of condensation is found to be faster for base catalyst. The gelation process was also characterized by viscosity measurement. Normal sol-gel process was also carried out along with the ultrasonic one to compare the effectiveness of ultrasonic. The silica gel was calcined and the powdered sample was characterized with scanning electron microscopy, energy dispersive spectra, X-ray diffractogram, and FTIR spectroscopy. Copyright © 2014 Elsevier B.V. All rights reserved.

Progesterone-releasing devices for cattle estrus induction and synchronization: Device optimization to anticipate shorter treatment durations and new device developments.

Science.gov (United States)

de Graaff, W; Grimard, B

2018-05-01

Synchronization programs using progesterone-releasing intravaginal devices that allow for fixed time artificial insemination are still finding increasing application in bovine reproduction. This practice is useful for rationalizing livestock management because an increased number of cows can be inseminated in one session without the need for estrus detection. Although much of the innovation related to the design and development of intravaginal devices for use in cattle took place in the previous century, progress in understanding the physiology of the bovine estrous cycle resulted in shorter treatment durations, a trend which is still continuing. In this competitive market, with little functional differentiation between the existing devices, the shorter treatment duration prompted for optimization of the progesterone content in the device, as the cost of the drug significantly contributes to the price per unit. For CIDR ® a reduction of the progesterone content of about 30 per cent was realized. Price reduction remained an important target for further device development. Next to reduction of progesterone content, cheaper and easier to process materials like polyethylene vinyl acetate (EVA) copolymers have been explored to replace the commonly used silicone elastomers. The reengineering effort of CIDR ® demonstrated that knowledge of release kinetics and insight into gradual depletion patterns in the device is critical for optimization of drug content without compromising performance (blood levels). More recent publications related to the use of alternative polymers like EVA and polyisoprene (IP) indicated encouraging results regarding further reduction of progesterone content. The use of EVA seems most promising, because it is in principle a low-cost polymer available in many grades and this thermoplastic polymer can be processed easily by means of commonly used techniques like injection molding and extrusion. The use of thermoplastic polymers, however, requires

Characterization of Binary Organogels Based on Some Azobenzene Compounds and Alkyloxybenzoic Acids with Different Chain Lengths

Directory of Open Access Journals (Sweden)

Yongmei Hu

2014-01-01

Full Text Available In this work the gelation behaviors of binary organogels composed of azobenzene amino derivatives and alkyloxybenzoic acids with different lengths of alkyl chains in various organic solvents were investigated and characterized. The corresponding gelation behaviors in 20 solvents were characterized and shown as new binary organic systems. It showed that the lengths of substituent alkyl chains in compounds have played an important role in the gelation formation of gelator mixtures in present tested organic solvents. Longer methylene chains in molecular skeletons in these gelators seem more suitable for the gelation of present solvents. Morphological characterization showed that these gelator molecules have the tendency to self-assemble into various aggregates from lamella, wrinkle, and belt to dot with change of solvents and gelator mixtures. Spectral characterization demonstrated different H-bond formation and hydrophobic force existing in gels, depending on different substituent chains in molecular skeletons. Meanwhile, these organogels can self-assemble to form monomolecular or multilayer nanostructures owing to the different lengths of due to alkyl substituent chains. Possible assembly modes for present xerogels were proposed. The present investigation is perspective to provide new clues for the design of new nanomaterials and functional textile materials with special microstructures.

Experimental and model study of the formation of chitosan-tripolyphosphate-siRNA nanoparticles

DEFF Research Database (Denmark)

Schrøder, Tine Daa; Olsen, Lars Folke; Long, Yi

2014-01-01

Chitosan-tripolyphosphate (TPP) nanoparticles have received great interest as a drug delivery system due to the simple and mild procedure of ionic gelation and the biocompatibility of chitosan. We have studied the formation of chitosan nano- and microparticles through ionic gelation with TPP...... in the absence and presence of NaCl, by measuring the kinetics of formation, particle size, and zeta potential. Depending on the experimental conditions (concentrations of chitosan and TPP and the presence or absence of NaCl), particle formation displays an exponential or a sigmoidal time dependency. In order...

Diagnostic time in digital pathology: A comparative study on 400 cases

Directory of Open Access Journals (Sweden)

Aleksandar Vodovnik

2016-01-01

Full Text Available Background: Numerous validation studies in digital pathology confirmed its value as a diagnostic tool. However, a longer time to diagnosis than traditional microscopy has been seen as a significant barrier to the routine use of digital pathology. As a part of our validation study, we compared a digital and microscopic diagnostic time in the routine diagnostic setting. Materials and Methods: One senior staff pathologist reported 400 consecutive cases in histology, nongynecological, and fine needle aspiration cytology (20 sessions, 20 cases/session, over 4 weeks. Complex, difficult, and rare cases were excluded from the study to reduce the bias. A primary diagnosis was digital, followed by traditional microscopy, 6 months later, with only request forms available for both. Microscopic slides were scanned at ×20, digital images accessed through the fully integrated laboratory information management system (LIMS and viewed in the image viewer on double 23” displays. A median broadband speed was 299 Mbps. A diagnostic time was measured from the point slides were made available to the point diagnosis was made or additional investigations were deemed necessary, recorded independently in minutes/session and compared. Results: A digital diagnostic time was 1841 and microscopic 1956 min; digital being shorter than microscopic in 13 sessions. Four sessions with shorter microscopic diagnostic time included more cases requiring extensive use of magnifications over ×20. Diagnostic time was similar in three sessions. Conclusions: A diagnostic time in digital pathology can be shorter than traditional microscopy in the routine diagnostic setting, with adequate and stable network speeds, fully integrated LIMS and double displays as default parameters. This also related to better ergonomics, larger viewing field, and absence of physical slide handling, with effects on both diagnostic and nondiagnostic time. Differences with previous studies included a design

Effect of different temperature-time combinations on physicochemical, microbiological, textural and structural features of sous-vide cooked lamb loins.

Science.gov (United States)

Roldán, Mar; Antequera, Teresa; Martín, Alberto; Mayoral, Ana Isabel; Ruiz, Jorge

2013-03-01

Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70, and 80 °C) and time (6, 12, and 24 h). Different physicochemical, histological and structural parameters were studied. Increasing cooking temperatures led to higher weight losses and lower moisture contents, whereas the effect of cooking time on these variables was limited. Samples cooked at 60 °C showed the highest lightness and redness, while increasing cooking temperature and cooking time produced higher yellowness values. Most textural variables in a texture profile analysis showed a marked interaction between cooking temperature and time. Samples cooked for 24h showed significantly lower values for most of the studied textural parameters for all the temperatures considered. Connective tissue granulation at 60 °C and gelation at 70 °C were observed in the SEM micrographs. The sous-vide cooking of lamb loins dramatically reduced microbial population even with the less intense heat treatment studied (60 °C-6 h). Copyright © 2012 Elsevier Ltd. All rights reserved.

Foot strike patterns and ground contact times during high-calibre middle-distance races.

Science.gov (United States)

Hayes, Phil; Caplan, Nicholas

2012-01-01

The aims of this study were to examine ground contact characteristics, their relationship with race performance, and the time course of any changes in ground contact time during competitive 800 m and 1500 m races. Twenty-two seeded, single-sex middle-distance races totalling 181 runners were filmed at a competitive athletics meeting. Races were filmed at 100 Hz. Ground contact time was recorded one step for each athlete, on each lap of their race. Forefoot and midfoot strikers had significantly shorter ground contact times than heel strikers. Forefoot and midfoot strikers had significantly faster average race speed than heel strikers. There were strong large correlations between ground contact time and average race speed for the women's events and men's 1500 m (r = -0.521 to -0.623; P < 0.05), whereas the men's 800 m displayed only a moderate relationship (r = -0.361; P = 0.002). For each event, ground contact time for the first lap was significantly shorter than for the last lap, which might reflect runners becoming fatigued.

Atmospheric modelling and prediction at time scales from days to seasons

CSIR Research Space (South Africa)

Landman, WA

2010-09-01

Full Text Available to seasonal forecasts, and produce multi-decadal climate change projections. This paper focuses on the shorter time-range from days to seasons. The conformal-cubic atmospheric model (CCAM) is an atmospheric global circulation model (AGCM) that can operate...

Regular transport dynamics produce chaotic travel times.

Science.gov (United States)

Villalobos, Jorge; Muñoz, Víctor; Rogan, José; Zarama, Roberto; Johnson, Neil F; Toledo, Benjamín; Valdivia, Juan Alejandro

2014-06-01

In the hope of making passenger travel times shorter and more reliable, many cities are introducing dedicated bus lanes (e.g., Bogota, London, Miami). Here we show that chaotic travel times are actually a natural consequence of individual bus function, and hence of public transport systems more generally, i.e., chaotic dynamics emerge even when the route is empty and straight, stops and lights are equidistant and regular, and loading times are negligible. More generally, our findings provide a novel example of chaotic dynamics emerging from a single object following Newton's laws of motion in a regularized one-dimensional system.

Bis-naphthalimides self-assembly organogel formation and application in detection of p-phenylenediamine

Energy Technology Data Exchange (ETDEWEB)

Cao, Xinhua, E-mail: caoxh@xynu.edu.cn [College of Chemistry and Chemical Engineering, Institute for Conservation and Utilization of Agro-bioresources in Dabie Mountains, Xinyang Normal University, Xinyang, Henan, 464000 (China); State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082 (China); Zhao, Na; Gao, Aiping; Lv, Haiting; Jia, Yuling [College of Chemistry and Chemical Engineering, Institute for Conservation and Utilization of Agro-bioresources in Dabie Mountains, Xinyang Normal University, Xinyang, Henan, 464000 (China); Wu, Renmiao [School of Chemistry and Chemical Engineering, Gannan Normal University, Ganzhou, Jiangxi 341000 (China); Wu, Yongquan, E-mail: wyq@gnnu.edu.cn [School of Chemistry and Chemical Engineering, Gannan Normal University, Ganzhou, Jiangxi 341000 (China)

2017-01-01

Two new gelators containing bis-naphthalimides group were designed and synthesized. The gelator 1b could form gels in DMF and mixed solvent of DMSO/H{sub 2}O (10/1, v/v). The self-assembly processes of 1b in two kinds of solvents were detailedly investigated by UV–vis, fluorescence, infrared spectroscopy, field emission scanning electron microscope (FE-SEM), X-ray diffraction and contact angle experiments. The experiment results showed the hydrogen bonding was the main force for the gel formation. The gel 1b formed in mixed solvent of DMSO/H{sub 2}O (10/1, v/v) possessed of the ability of distinguishing of o-phenylenediamine, m-phenylenediamine and p-phenylenediamine. At the same time, the gelator 1b could selectively and sensitively detect p-phenylenediamine in solution with the detection limit of 8.961 × 10{sup −8} M L{sup −1}. The detection experiment was also confirmed by DFT theoretical calculations. This research would expand the supramolecular self-assembly materials application in sensor field and offer a new detection method for organic amines. - Highlights: • The self-assembly process of the gelator 1b in mixed solvent of DMSO/H{sub 2}O (10/1, v/v) are studied. • The gel 1b had the ability of distinguishing of o-phenylenediamine, m-phenylenediamine and p-phenylenediamine. • The gelator 1b could selectively and sensitively detect p-phenylenediamine with the detection limit of 8.961 × 10{sup −8} mol L{sup −1}.

First-line intra-arterial versus intravenous chemotherapy in unilateral sporadic group D retinoblastoma: evidence of better visual outcomes, ocular survival and shorter time to success with intra-arterial delivery from retrospective review of 20 years of treatment.

Science.gov (United States)

Munier, Francis L; Mosimann, Pascal; Puccinelli, Francesco; Gaillard, Marie-Claire; Stathopoulos, Christina; Houghton, Susan; Bergin, Ciara; Beck-Popovic, Maja

2017-08-01

The introduction of intra-arterial chemotherapy (IAC) as salvage treatment has improved the prognosis for eye conservation in group D retinoblastoma. The aim of this study was to compare the outcomes of consecutive patients with advanced unilateral disease treated with either first-line intravenous chemotherapy (IVC) or first-line IAC. This is a retrospective mono-centric comparative review of consecutive patients. Sporadic unilateral retinoblastoma group D cases treated conservatively at Jules-Gonin Eye Hospital and CHUV between 1997 and 2014. From January 1997 to August 2008, IVC, combined with focal treatments, was the primary treatment approach. From September 2008 to October 2014, IAC replaced IVC as first-line therapy. 48 patients met the inclusion criteria, receiving only either IAC or IVC as primary treatment modality. Outcomes of 23 patients treated by IVC were compared with those of 25 treated by IAC; mean follow-up was 105.3 months (range 29.2-218.6) and 41.7 months (range 19.6-89.5), respectively. Treatment duration was significantly shorter in the IAC group (pchemotherapy treatment. Despite this, the results reported here imply that eyes treated with first-line IAC will have shorter treatment period, better ocular survival and visual acuity than first-line IVC. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Structure, dynamics and folding of an immunoglobulin domain of the gelation factor (ABP-120) from Dictyostelium discoideum.

Science.gov (United States)

Hsu, Shang-Te Danny; Cabrita, Lisa D; Fucini, Paola; Dobson, Christopher M; Christodoulou, John

2009-05-15

We have carried out a detailed structural and dynamical characterisation of the isolated fifth repeat of the gelation factor (ABP-120) from Dictyostelium discoideum (ddFLN5) by NMR spectroscopy to provide a basis for studies of co-translational folding on the ribosome of this immunoglobulin-like domain. The isolated ddFLN5 can fold autonomously in solution into a structure that resembles very closely the crystal structure of the domain in a construct in which the adjacent sixth repeat (ddFLN6) is covalently linked to its C-terminus in tandem but deviates locally from a second crystal structure in which ddFLN5 is flanked by ddFLN4 and ddFLN6 at both N- and C-termini. Conformational fluctuations were observed via (15)N relaxation methods and are primarily localised in the interstrand loops that encompass the C-terminal hemisphere. These fluctuations are distinct in location from the region where line broadening is observed in ddFLN5 when attached to the ribosome as part of a nascent chain. This observation supports the conclusion that the broadening is associated with interactions with the ribosome surface [Hsu, S. T. D., Fucini, P., Cabrita, L. D., Launay, H., Dobson, C. M. & Christodoulou, J. (2007). Structure and dynamics of a ribosome-bound nascent chain by NMR spectroscopy. Proc. Natl. Acad. Sci. USA, 104, 16516-16521]. The unfolding of ddFLN5 induced by high concentrations of urea shows a low population of a folding intermediate, as inferred from an intensity-based analysis, a finding that differs from that of ddFLN5 as a ribosome-bound nascent chain. These results suggest that interesting differences in detail may exist between the structure of the domain in isolation and when linked to the ribosome and between protein folding in vitro and the folding of a nascent chain as it emerges from the ribosome.

Detection of the pyrogen in the radiopharmaceuticals using Limulus test and inhibitory factors in the gelation reaction

International Nuclear Information System (INIS)

Murata, Hajime; Iio, Masahiro; Yamada, Hideo; Chiba, Kazuo; Kobayashi, Masayoshi.

1975-01-01

To examine the sensitivities of the Limulus test and the inhibitory factors in radiopharmaceuticals, the following procedures were employed. Twenty commonly used radiopharmaceuticals were examined by Limulus Lysate (Pre-gel). In order to detect the inhibitory factors, several doses of endotoxin (E. coli) were added to the radiopharmaceuticals before the Limulus test was made and the results were compared with control results using saline solution of endotoxin. When the pH of the reaction solution lay out of a suitable range (6.0-7.5), the pH was adjusted by Tris-HCl buffer before the reaction. The sensitivity of the Limulus test control using Pre-gel was positive at a concentration of 10 -3 μg/ml of endotoxin. The Limulus test was sensitive and without inhibitory reactions for sup(99m)TcO 4 -, sup(99m)Tc-albumin, sup(99m)Tc-MAA, sup(99m)Tc-Sn-colloid, 131 I-hippurate, Na 131 I, Na 2 51 CrO 4 , 67 Ga-citrate and 57 Co-bleomycin as they were supplied. 111 In-DTPA, sup(99m)Tc-phytate, sup(99m)Tc-pyrophosphate, sup(99m)Tc-DTPA, 131 I-PVP, 59 FeCl 3 , Na-phosphate ( 32 P), 198 Au-colloid and 75 Se-selenomethionine needed to have their pH adjusted to avoid inhibition. Benzyl alcohol in the radiopharmaceutical showed an inhibitory effect at a concentration greater than 1%. Commonly used 169 Yb-DTPA which was evaluated by this test had a sensitivity of 2.5 x 10 -3 μg/ml due to addition of a small amount of benzyl alcohol. 131 I-BSP showed intense inhibition in gelation reaction. Contaminations of endotoxin were detected in sup(99m)Tc-albumin, sup(99m)Tc-Sn-colloid, 131 I-hippurate, Na 131 I, Na 2 51 CrO 4 , 198 Au-colloid, 57 Co-bleomycin and 75 Se-selenomethionine. (auth.)

A Kinetic Model Explains Why Shorter and Less Affine Enzyme-recruiting Oligonucleotides Can Be More Potent

Directory of Open Access Journals (Sweden)

Lykke Pedersen

2014-01-01

Full Text Available Antisense oligonucleotides complementary to RNA targets promise generality and ease of drug design. The first systemically administered antisense drug was recently approved for treatment and others are in clinical development. Chemical modifications that increase the hybridization affinity of oligonucleotides are reasoned to confer higher potency, i.e., modified oligonucleotides can be dosed at lower concentrations to achieve the same effect. Surprisingly, shorter and less affine oligonucleotides sometimes display increased potency. To explain this apparent contradiction, increased uptake or decreased propensity to form structures have been suggested as possible mechanisms. Here, we provide an alternative explanation that invokes only the kinetics behind oligonucleotide-mediated cleavage of RNA targets. A model based on the law of mass action predicts, and experiments support, the existence of an optimal binding affinity. Exaggerated affinity, and not length per se, is detrimental to potency. This finding clarifies how to optimally apply high-affinity modifications in the discovery of potent antisense oligonucleotide drugs.

Control of fibroin conformation: Toward the development of a biomimetic spinning process for silk fibers

Science.gov (United States)

Carlson, Kimberly Ann Trabbic

1999-09-01

Nature has shown that silks are sophisticated structural materials with remarkable mechanical properties; however, they are produced using far milder conditions than high-performance synthetic polymer fibers. While recent advances in molecular biotechnology have taken great strides toward the production of proteinaceous biopolymers, little is known about the processing conditions needed to spin fibers with the correct microstructures and mechanical properties. It is the purpose of this research to gain a fundamental understanding about how processing conditions affect the molecular structure of a model protein biopolymer, Bombyx mori silkworm fibroin, the structural protein of cocoon silk. Fibers of B. mori fibroin were wet spun from 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) into a methanol coagulation bath. X-ray fiber diffraction and quantitative Raman spectroscopy were used to determine that both naturally- and synthetically-spun fibers contain a high degree of beta-sheet (~50%). Fibers subjected to a post-spinning draw exhibited a preferential molecular alignment parallel to the fiber axis resulting in increased strength, stiffness, and extensibility. Fibers with microstructures and mechanical properties most similar to those of naturally-spun fibers were reproduced in synthetically-spun fibers with a draw ratio of 3.5. The transformation of helical fibroin in HFIP to beta-sheet sheet fibroin in synthetically-spun fibers was determined to be caused by the methanol coagulation bath. The kinetics beta-sheet fibroin crystallization from aqueous solution was investigated by monitoring the sigmoidal progression of gel formation using turbidity and Raman spectroscopy. Gelation kinetics were evaluated by measuring lag time, maximum gelation rate, and optical density to determine the effects of protein concentration, detergent concentration (nucleating agent), headgroup chemistry, ionic strength, pH, and temperature. An optimal molar ratio between SDS and fibroin (100

The effects of in-vehicle tasks and time-gap selection while reclaiming control from adaptive cruise control (ACC) with bus simulator.

Science.gov (United States)

Lin, Tsang-Wei; Hwang, Sheue-Ling; Su, Jau-Ming; Chen, Wan-Hui

2008-05-01

This research aimed to find out the effects of in-vehicle distractions and time-gap settings with a fix-based bus driving simulator in a following scenario. Professional bus drivers were recruited to perform in-vehicle tasks while driving with adaptive cruise control (ACC) of changeable time-gap settings in freeway traffic. Thirty subjects were divided equally into three groups for different in-vehicle task modes (between subjects), including no task distraction, hands-free, and manual modes. Further, time-gap settings for the experimental ACC were: shorter than 1.0 s, 1.0-1.5 s, 1.5-2.0 s, and longer than 2.0 s (within subjects). Longitudinal (mean headway, forward collision rate, and response time) and lateral control (mean lateral lane position and its standard deviation) performance was assessed. In the results, longitudinal control performance was worsened by both shorter time-gaps and heavier in-vehicle tasks. But the interaction indicated that the harm by heavier in-vehicle distraction could be improved by longer time-gaps. As for the lateral control, it would only be negatively affected by shorter time-gap settings. This research indicates the effects of time-gaps and in-vehicle distraction, as well as the interaction. Proper time-gap selection under different in-vehicle distractions can help avoid accidents and keep safe.

Hypermetabolism in ALS is associated with greater functional decline and shorter survival.

Science.gov (United States)

Steyn, Frederik J; Ioannides, Zara A; van Eijk, Ruben P A; Heggie, Susan; Thorpe, Kathryn A; Ceslis, Amelia; Heshmat, Saman; Henders, Anjali K; Wray, Naomi R; van den Berg, Leonard H; Henderson, Robert D; McCombe, Pamela A; Ngo, Shyuan T

2018-04-29

To determine the prevalence of hypermetabolism, relative to body composition, in amyotrophic lateral sclerosis (ALS) and its relationship with clinical features of disease and survival. Fifty-eight patients with clinically definite or probable ALS as defined by El Escorial criteria, and 58 age and sex-matched control participants underwent assessment of energy expenditure. Our primary outcome was the prevalence of hypermetabolism in cases and controls. Longitudinal changes in clinical parameters between hypermetabolic and normometabolic patients with ALS were determined for up to 12 months following metabolic assessment. Survival was monitored over a 30-month period following metabolic assessment. Hypermetabolism was more prevalent in patients with ALS than controls (41% vs 12%, adjusted OR=5.4; pALS. Mean lower motor neuron score (SD) was greater in hypermetabolic patients when compared with normometabolic patients (4 (0.3) vs 3 (0.7); p=0.04). In the 12 months following metabolic assessment, there was a greater change in Revised ALS Functional Rating Scale score in hypermetabolic patients when compared with normometabolic patients (-0.68 points/month vs -0.39 points/month; p=0.01). Hypermetabolism was inversely associated with survival. Overall, hypermetabolism increased the risk of death during follow-up to 220% (HR 3.2, 95% CI 1.1 to 9.4, p=0.03). Hypermetabolic patients with ALS have a greater level of lower motor neuron involvement, faster rate of functional decline and shorter survival. The metabolic index could be important for informing prognosis in ALS. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The Time Is Up: Compression of Visual Time Interval Estimations of Bimodal Aperiodic Patterns

Science.gov (United States)

Duarte, Fabiola; Lemus, Luis

2017-01-01

The ability to estimate time intervals subserves many of our behaviors and perceptual experiences. However, it is not clear how aperiodic (AP) stimuli affect our perception of time intervals across sensory modalities. To address this question, we evaluated the human capacity to discriminate between two acoustic (A), visual (V) or audiovisual (AV) time intervals of trains of scattered pulses. We first measured the periodicity of those stimuli and then sought for correlations with the accuracy and reaction times (RTs) of the subjects. We found that, for all time intervals tested in our experiment, the visual system consistently perceived AP stimuli as being shorter than the periodic (P) ones. In contrast, such a compression phenomenon was not apparent during auditory trials. Our conclusions are: first, the subjects exposed to P stimuli are more likely to measure their durations accurately. Second, perceptual time compression occurs for AP visual stimuli. Lastly, AV discriminations are determined by A dominance rather than by AV enhancement. PMID:28848406

Predicting the time of conversion to MCI in the elderly: role of verbal expression and learning.

Science.gov (United States)

Oulhaj, Abderrahim; Wilcock, Gordon K; Smith, A David; de Jager, Celeste A

2009-11-03

Increasing awareness that minimal or mild cognitive impairment (MCI) in the elderly may be a precursor of dementia has led to an increase in the number of people attending memory clinics. We aimed to develop a way of predicting the period of time before cognitive impairment occurs in community-dwelling elderly. The method is illustrated by the use of simple tests of different cognitive domains. A cohort of 241 normal elderly volunteers was followed for up to 20 years with regular assessments of cognitive abilities using the Cambridge Cognitive Examination (CAMCOG); 91 participants developed MCI. We used interval-censored survival analysis statistical methods to model which baseline cognitive tests best predicted the time to convert to MCI. Out of several baseline variables, only age and CAMCOG subscores for expression and learning/memory were predictors of the time to conversion. The time to conversion was 14% shorter for each 5 years of age, 17% shorter for each point lower in the expression score, and 15% shorter for each point lower in the learning score. We present in tabular form the probability of converting to MCI over intervals between 2 and 10 years for different combinations of expression and learning scores. In apparently normal elderly people, subtle measurable cognitive deficits that occur within the normal range on standard testing protocols reliably predict the time to clinically relevant cognitive impairment long before clinical symptoms are reported.

Do Dysphagic Patients with an Absent Pharyngeal Swallow Have a Shorter Survival than Dysphagic Patients with Pharyngeal Swallow? Prognostic Importance of a Therapeutic Videoradiographic Swallowing Study (TVSS)

International Nuclear Information System (INIS)

Buelow, M.; Olsson, R.; Ekberg, O.

2005-01-01

Purpose: To study survival in two groups of dysphagic patients - one group unable to elicit the pharyngeal stage of swallow (APS) and another group with pharyngeal swallow (WPS) - and to compare recommendations regarding nutrition and therapeutic strategies based on the therapeutic swallowing study. Material and Methods: In this retrospective study, the records of dysphagic patients who have undergone a therapeutic videoradiographic swallowing study (TVSS) were reviewed. Forty patients without pharyngeal swallow were matched for age and gender with 40 patients with pharyngeal swallow; altogether 80 patients were included in the study. Survival was registered at 3, 12, and 72 months after the TVSS. Results: In this study, the APS group had a significantly shorter survival time compared to the WPS group when followed-up at 12 months. In the APS group, most patients (37.5% (15/40)) died within the 3 months after TVSS. At 72 months, 62.5% (25/40) of the patients in the APS group had died. In the WPS group, 5% (2/40) had died within 3 months and 47.4% (19/40) after 12 months. At 72 months, 52.5% (21/40) of the patients in the WPS group had died. Regarding nutritional and therapeutic recommendations based on TVSS, 34/40 in the APS group were recommended no oral intake. Eighteen naso-gastric tubes were placed directly after TVSS. The therapeutic strategies recommended were head-positioning, thermal tactile stimulation, and tongue exercises (in 8 patients). In the WPS group, all patients were recommended oral intake. Diet modification was recommended in 29 patients. The therapeutic strategies recommended were head-positioning, thermal tactile stimulation, tongue exercises, supraglottic swallow, and effortful swallow (in 24 patients). Conclusion: Patients unable to elicit the pharyngeal stage of swallow had a shorter survival time than patients with pharyngeal swallow, probably due to a more severe underlying disease. Tube feeding was more frequent in the APS group. Fewer

SHORTER, Aylward. African recruits and missionary conscripts: the White Fathers and the Great War (1914 – 1922. London: Missionaries of Africa History Project, 2007. 270 p. ISBN: 9780955523502

Directory of Open Access Journals (Sweden)

Jefferson Olivatto da Silva

2011-09-01

Full Text Available Resenha do livroSHORTER, Aylward. African recruits and missionary conscripts: the White Fathers and the Great War (1914 – 1922. London: Missionaries of Africa History Project, 2007. 270 p. ISBN: 9780955523502

Measuring small time periods in earth sciences by uranium series disequilibrium

International Nuclear Information System (INIS)

Choudhary, A.K.

2008-01-01

During the last three decades mass spectrometry in India has seen its application in almost every field of science. In particular, TIMS has revolutionized geological sciences by taking it from a mainly descriptive to modern quantitative Earth Sciences. It has largely contributed in measurement of precise time scales of geological processes. During the last decade, focus has primarily been on measurement of time scales of these fundamental processes. Some of the radiometric methods initially developed for measuring shorter time-scales have their own problems. The intermediate nuclides in the uranium and thorium decay series having much shorter half lives compared to their parents, provide a useful tool to measure intermediate time scales. These isotopes had earlier been ignored due to analytical difficulties associated with their measurement. The development of new generation mass spectrometers with very high abundance sensitivity has now made it possible to measure these isotopic ratios. Consequently U-series isotopic measurements have put unique and at times the only quantitative constraints on the processes taking place in the interior of the Earth. Since such mass spectrometers have recently been installed in some of the laboratories in India, scientific investigation may now be taken up in some of the unexplored areas of Earth Sciences in our country

Enhancing Antidepressant Effect of Poloxamer/Chitosan Thermosensitive Gel Containing Curcumin-Cyclodextrin Inclusion Complex

Directory of Open Access Journals (Sweden)

Ye Zhang

2018-01-01

Full Text Available Poor solubility and bioavailability are limiting factors for the clinical application of curcumin. This study seeks to develop poloxamer/chitosan thermosensitive gel containing curcumin-cyclodextrin inclusion complex with enhanced brain bioavailability and antidepressant effect. The optimized gel had shorter gelation time and produced sustained release in vitro characterized with non-Fickian diffusion. Pharmacokinetics of gel were evaluated using male Sprague-Dawley rats receiving 240 μg/kg of curcumin and curcumin-cyclodextrin inclusion complex through intranasal administration, compared against a control group receiving intravenous curcumin (240 μg/kg. The intranasal administration of gel provided sustained release by maintaining plasma concentrations of curcumin above 21.27 ± 3.26 ng/mL for up to 8 h. Compared to intranasal administration of the inclusion complex, AUC0–8 h of curcumin from thermoreversible gel in plasma and hippocampus was increased 1.62- and 1.28-fold, respectively. The gel exhibited superior antidepressant activity in mice. The findings reported here suggested that the clinical application of curcumin can be better exploited through an intranasal administration of the thermosensitive gel.

Lithium-Catalyzed Carbon Aerogel and Its Possible Application in Energy Storage Materials

Science.gov (United States)

Ciszewski, Mateusz; Szatkowska, Elżbieta; Koszorek, Andrzej

2017-07-01

A lithium-based catalyst for carbon aerogel compounds and carbon nanotubes synthesis was used. Lithium hydroxide-catalyzed and CNT-modified carbon aerogel was compared to traditionally synthesized sodium carbonate-catalyzed carbon aerogel, as well as to the same material modified with CNT to evaluate the real effect of lithium hydroxide addition. Enhancement in the specific surface area from 498 m2/g to 786 m2/g and significant change in pore size distribution were observed. Low temperature, supercritical drying in carbon dioxide was used to prepare an organic aerogel with subsequent pyrolysis in an inert gas flow to convert it into carbon aerogel. The as-obtained material was examined with respect to energy storage applications, i.e. symmetric hybrid supercapacitors. It was shown that lithium hydroxide was responsible for shorter gelation time, increased specific surface area, and a greater number of micropores within the structure. For both reference materials prepared using sodium carbonate, quite different data were recorded. It was presented that the proper choice of carbon matrix should combine both high specific surface area and appropriate pore size distribution. High surface area and a relatively large number of micropores were responsible for specific capacity loss.

Do Japanese Work Shorter Hours than before?: Measuring Trends in Market Work and Leisure Using 1976-2006 Japanese Time-Use Survey

OpenAIRE

Kuroda, Sachiko

2009-01-01

Using Japanese time-use data from the Survey on Time Use and Leisure Activities (STULA), this paper measures trends in average hours worked (market work) and leisure for Japanese over the past three decades. OECD reports at least a 15 percent decline in market work for Japan since the 1970s. However, holding demographic changes constant, we found that market work per week increased from the 1970s until mid 1980s, and has been relatively stable for the last two decades for both male and female...

Online Synthesis for Operation Execution Time Variability on Digital Microfluidic Biochips

DEFF Research Database (Denmark)

Alistar, Mirela; Pop, Paul

2014-01-01

have assumed that each biochemical operation in an application is characterized by a worst-case execution time (wcet). However, during the execution of the application, due to variability and randomness in biochemical reactions, operations may finish earlier than their wcets. In this paper we propose...... an online synthesis strategy that re-synthesizes the application at runtime when operations experience variability in their execution time, obtaining thus shorter application execution times. The proposed strategy has been evaluated using several benchmarks....

Sol-gel technology applied to crystalline ceramic nuclear waste forms

International Nuclear Information System (INIS)

Angelini, P.; Bond, W.D.; Caputo, A.J.; Mack, J.E.; Lackey, W.J.; Lee, D.A.; Stinton, D.P.

1980-01-01

The sol-gel process is being developed for the solidification and isolation of high-level nuclear fuel waste. Three gelation methods are being developed for producing alternative waste forms. These include internal gelation for producing spheres of up to 1 mm diam suitable for coating, external gelation, and water extraction methods for producing material suitable for alternate ceramic processing. In this study internal gelation has been used to produce ceramic spheres of various alternative nuclear waste compositions. A gelation system capable of producing 100-g batches has been assembled and used for development. Waste forms containing up to 70 wt % simulated Savannah River Plant waste have been produced. Dopants such as Cs, Sr, Nd, Ru, and Mo were used in some experiments to observe side waste streams and sintering effects. Synroc microspheres were coated with both low-density carbon, high-density impermeable carbon, high-temperature dense SiC, and SiC deposited at temperatures near 900 0 C. Other gelation methods and other alternative waste forms are being developed

Time and speed of fruit drying on batch fluid-beds

Indian Academy of Sciences (India)

Drying of particles (pieces) in a fluidized bed affords better quality of end products, especially for better product structure and its shorter reconstitution time. Fluid-bed drying of different fruit particles has been investigated. Starting water content varies from grape berries 81·5% and peach 87·7% to apricot 86·9%.

The self-crosslinking smart hyaluronic acid hydrogels as injectable three-dimensional scaffolds for cells culture.

Science.gov (United States)

Bian, Shaoquan; He, Mengmeng; Sui, Junhui; Cai, Hanxu; Sun, Yong; Liang, Jie; Fan, Yujiang; Zhang, Xingdong

2016-04-01

Although the disulfide bond crosslinked hyaluronic acid hydrogels have been reported by many research groups, the major researches were focused on effectively forming hydrogels. However, few researchers paid attention to the potential significance of controlling the hydrogel formation and degradation, improving biocompatibility, reducing the toxicity of exogenous and providing convenience to the clinical operations later on. In this research, the novel controllable self-crosslinking smart hydrogels with in-situ gelation property was prepared by a single component, the thiolated hyaluronic acid derivative (HA-SH), and applied as a three-dimensional scaffold to mimic native extracellular matrix (ECM) for the culture of fibroblasts cells (L929) and chondrocytes. A series of HA-SH hydrogels were prepared depending on different degrees of thiol substitution (ranging from 10 to 60%) and molecule weights of HA (0.1, 0.3 and 1.0 MDa). The gelation time, swelling property and smart degradation behavior of HA-SH hydrogel were evaluated. The results showed that the gelation and degradation time of hydrogels could be controlled by adjusting the component of HA-SH polymers. The storage modulus of HA-SH hydrogels obtained by dynamic modulus analysis (DMA) could be up to 44.6 kPa. In addition, HA-SH hydrogels were investigated as a three-dimensional scaffold for the culture of fibroblasts cells (L929) and chondrocytes cells in vitro and as an injectable hydrogel for delivering chondrocytes cells in vivo. These results illustrated that HA-SH hydrogels with controllable gelation process, intelligent degradation behavior, excellent biocompatibility and convenient operational characteristics supplied potential clinical application capacity for tissue engineering and regenerative medicine. Copyright © 2016 Elsevier B.V. All rights reserved.

Time to punishment: the effects of a shorter criminal procedure on crime rates

Czech Academy of Sciences Publication Activity Database

Dušek, Libor

2015-01-01

Roč. 43, August (2015), s. 134-147 ISSN 0144-8188 Institutional support: PRVOUK-P23 Keywords : criminal procedure * deterrence * law enforcement Subject RIV: AH - Economics Impact factor: 0.543, year: 2015

Time to punishment: the effects of a shorter criminal procedure on crime rates

Czech Academy of Sciences Publication Activity Database

Dušek, Libor

2015-01-01

Roč. 43, August (2015), s. 134-147 ISSN 0144-8188 Institutional support: RVO:67985998 Keywords : criminal procedure * deterrence * law enforcement Subject RIV: AH - Economics Impact factor: 0.543, year: 2015

Accuracy of rate coding: When shorter time window and higher spontaneous activity help

Czech Academy of Sciences Publication Activity Database

Leváková, Marie; Tamborrino, M.; Košťál, Lubomír; Lánský, Petr

2017-01-01

Roč. 95, č. 2 (2017), č. článku 022310. ISSN 2470-0045 R&D Projects: GA ČR(CZ) GA15-08066S; GA MŠk(CZ) 7AMB17AT048 Institutional support: RVO:67985823 Keywords : rate coding * observation window * spontaneous activity * Fisher information * perfect integrate- and -fire model * Wiener process Subject RIV: BB - Applied Statistics, Operational Research OBOR OECD: Biology (theoretical, mathematical, thermal, cryobiology, biological rhythm), Evolutionary biology Impact factor: 2.366, year: 2016

Tracheal intubation with rocuronium using a "modified timing principle".

Science.gov (United States)

Kwon, Min A; Song, Jaegyok; Kim, Ju-Ri

2013-03-01

Rapid sequence induction (RSI) is indicated in various situations. Succinylcholine has been the muscle relaxant of choice for RSI, and rocuronium has become an alternative medicine for patients who cannot be administered succinylcholine for various reasons. Although rocuronium has the most rapid onset time among non-depolarizing muscle relaxants, the standard dose of rocuronium (0.6 mg/kg) takes 60 seconds to achieve appropriate muscle relaxation. We evaluated intubating conditions using the "modified timing principle" with rocuronium and succinylcholine. In this prospective controlled blinded study, all patients received 1.5 µg/kg fentanyl intravenously with preoxygenation for 2 minutes and were randomized to receive 0.6 mg/kg rocuronium followed by 1.5 mg/kg propofol or 1.5 mg/kg propofol and 1.5 mg/kg succinylcholine. The rocuronium group was intubated just after confirming loss of consciousness, and the succinylcholine group was intubated 1 minute after injecting succinylcholine. Intubation condition, timing of events, and complications were recorded. All patients were successfully intubated in both groups. Apnea time of the rocuronium group (38.5 seconds) was significantly shorter than that in the succinylcholine group (100.7 seconds). No significant differences were observed in loss of consciousness time or intubation time. The succinylcholine group tended to show better intubation conditions, but no significant difference was observed. None of the patients complained awareness of the intubation procedure or had respiratory difficulty during a postoperative interview. The modified RSI with rocuronium showed shorter intubation sequence, acceptable intubation conditions, and a similar level of complications compared to those of conventional RSI with succinylcholine.

The Effect of Sports and Physical Activity on Elderly Reaction Time and Response Time

Directory of Open Access Journals (Sweden)

Abdolrahman Khezri

2014-07-01

Full Text Available Objectives: Physical activities ameliorate elderly motor and cognitive performance. The aim of this research is to study the effect of sport and physical activity on elderly reaction time and response time. Methods & Materials: The research method is causal-comparative and its statistical population consists of 60 active and non-active old males over 60 years residing at Mahabad city. Reaction time was measured by reaction timer apparatus, made in Takei Company (YB1000 model. Response time was measured via Nelson’s Choice- Response Movement Test. At first, reaction time and then response time was measured. For data analysis, descriptive statistic, K-S Test and One Sample T Test were used Results K-S Test show that research data was parametric. According to the results of this research, physical activity affected reaction time and response time. Results: of T test show that reaction time (P=0.000 and response time (P=0.000 of active group was statistically shorter than non- active group. Conclusion: The result of current study demonstrate that sport and physical activity, decrease reaction and response time via psychomotor and physiological positive changes.

Gender and socioeconomic status as determinants of waiting time for inpatient surgery in a system with implicit queue management.

Science.gov (United States)

Arnesen, Kjell E; Erikssen, Jan; Stavem, Knut

2002-12-01

In a system with implicit queue management, to examine gender and socioeconomic status as determinants of waiting time for inpatient surgery, after adjusting for other potential predictors. A cohort of 452 subjects was examined in outpatient clinics of a general hospital and referred to inpatient surgery. They were followed until scheduled hospital admission (n=396) or until the requested procedure no longer was relevant (n=56). We compared waiting time between groups from referral date until hospital admission, using Kaplan-Meier estimates of waiting times and log rank test. A Cox proportional hazards model was used for assessing the risk ratio (RR) of hospital admission for scheduled surgery. Gender and socioeconomic status could not explain variations in waiting time. However, patients with suspected/verified neoplastic disease or a risk of serious deterioration without treatment had markedly shorter waiting times than the reference groups, with adjusted RR (95% confidence intervals (95%CI)) of time to receiving in-patient surgery of 2.3 (1.7-3.0) and 2.0 (1.3-3.0), respectively. Being on sick leave was associated with shorter waiting time, adjusted RR of 1.7 (1.2-2.5). Referrals from within the hospital or other hospitals had also shorter waiting times than referrals from primary health care physicians, adjusted RR=1.4 (1.1-1.8). There was no evidence of bias against women or people in lower socioeconomic classes in this implicit queue management system. However, patients' access to inpatient surgery was associated with malignancy, prognosis, sick leave status, physician experience, referral pattern and the major diagnosis category.

Detection of the pyrogen in the radiopharmaceuticals using Limulus test and inhibitory factors in the gelation reaction

Energy Technology Data Exchange (ETDEWEB)

Murata, H; Iio, M; Yamada, H; Chiba, K [Tokyo Metropolitan Geriatric Medical Center (Japan); Kobayashi, M

1975-08-01

To examine the sensitivities of the Limulus test and the inhibitory factors in radiopharmaceuticals, the following procedures were employed. Twenty commonly used radiopharmaceuticals were examined by Limulus Lysate (Pre-gel). In order to detect the inhibitory factors, several doses of endotoxin (E. coli) were added to the radiopharmaceuticals before the Limulus test was made and the results were compared with control results using saline solution of endotoxin. When the pH of the reaction solution lay out of a suitable range (6.0-7.5), the pH was adjusted by Tris-HCl buffer before the reaction. The sensitivity of the Limulus test control using Pre-gel was positive at a concentration of 10/sup -3/ ..mu..g/ml of endotoxin. The Limulus test was sensitive and without inhibitory reactions for sup(99m)TcO/sub 4/-, sup(99m)Tc-albumin, sup(99m)Tc-MAA, sup(99m)Tc-Sn-colloid, /sup 131/I-hippurate, Na/sup 131/I, Na/sub 2//sup 51/CrO/sub 4/, /sup 67/Ga-citrate and /sup 57/Co-bleomycin as they were supplied. /sup 111/In-DTPA, sup(99m)Tc-phytate, sup(99m)Tc-pyrophosphate, sup(99m)Tc-DTPA, /sup 131/I-PVP, /sup 59/FeCl/sub 3/, Na-phosphate (/sup 32/P), /sup 198/Au-colloid and /sup 75/Se-selenomethionine needed to have their pH adjusted to avoid inhibition. Benzyl alcohol in the radiopharmaceutical showed an inhibitory effect at a concentration greater than 1%. Commonly used /sup 169/Yb-DTPA which was evaluated by this test had a sensitivity of 2.5 x 10/sup -3/ ..mu..g/ml due to addition of a small amount of benzyl alcohol. /sup 131/I-BSP showed intense inhibition in gelation reaction. Contaminations of endotoxin were detected in sup(99m)Tc-albumin, sup(99m)Tc-Sn-colloid, /sup 131/I-hippurate, Na/sup 131/I, Na/sub 2//sup 51/CrO/sub 4/, /sup 198/Au-colloid, /sup 57/Co-bleomycin and /sup 75/Se-selenomethionine.

Simultaneous acoustic and dielectric real time curing monitoring of epoxy systems

Science.gov (United States)

Gkikas, G.; Saganas, Ch.; Grammatikos, S. A.; Aggelis, D. G.; Paipetis, A. S.

2012-04-01

The attainment of structural integrity of the reinforcing matrix in composite materials is of primary importance for the final properties of the composite structure. The detailed monitoring of the curing process on the other hand is paramount (i) in defining the optimal conditions for the impregnation of the reinforcement by the matrix (ii) in limiting the effects of the exotherm produced by the polymerization reaction which create unwanted thermal stresses and (iii) in securing optimal behavior in matrix controlled properties, such as off axis or shear properties and in general the durability of the composite. Dielectric curing monitoring is a well known technique for distinguishing between the different stages of the polymerization of a typical epoxy system. The technique successfully predicts the gelation and the vitrification of the epoxy and has been extended for the monitoring of prepregs. Recent work has shown that distinct changes in the properties of the propagated sound in the epoxy which undergoes polymerization is as well directly related to the gelation and vitrification of the resin, as well as to the attainment of the final properties of the resin system. In this work, a typical epoxy is simultaneously monitored using acoustic and dielectric methods. The system is isothermally cured in an oven to avoid effects from the polymerization exotherm. Typical broadband sensors are employed for the acoustic monitoring, while flat interdigital sensors are employed for the dielectric scans. All stages of the polymerization process were successfully monitored and the validity of both methods was cross checked and verified.

High-Resolution Esophageal Manometry: A Time Motion Study

Directory of Open Access Journals (Sweden)

Daniel C Sadowski

2008-01-01

Full Text Available INTRODUCTION: High-resolution manometry (HRM of the esophagus is a new technique that provides a more precise assessment of esophageal motility than conventional techniques. Because HRM measures pressure events along the entire length of the esophagus simultaneously, clinical procedure time should be shorter because less catheter manipulation is required. According to manufacturer advertising, the new HRM system is more accurate and up to 50% faster than conventional methods.

Time-to-treatment of mental disorders in a community sample of Dutch adolescents. A TRAILS study.

Science.gov (United States)

Raven, D; Jörg, F; Visser, E; Oldehinkel, A J; Schoevers, R A

2017-04-01

the presence of a co-morbid mood disorder predicted a shorter time-to-treatment in general. Disorder severity predicted a shorter time-to-treatment for any care, but not for secondary care. Time-to-treatment for secondary care was shorter for adolescents from low and middle socioeconomic background than for adolescents from a high socioeconomic background. Although the time-to-treatment was shorter for adolescents than for adults, it was still substantial, and the overall patterns were remarkably similar to those found in adults. Efforts to reduce time-to-treatment should therefore be aimed at children and adolescents. Future research should address mechanisms underlying time-to-treatment and its consequences for early-onset disorders in particular.

Rheological study of a gel-forming precursor for superconducting YBa2Cu3O/sub 7-//sub x/

International Nuclear Information System (INIS)

Khan, S.A.; Barboux, P.; Bagley, B.G.; Tarascon, J.M.

1988-01-01

Rheological measurements are used to monitor the sol-gel behavior of a superconducting precursor. A precursor made with an aged yttrium component [Y(OH) 3 ] has a much higher elastic modulus (G') and complex viscosity (eta*) but the same loss modulus (G'') compared to that made with a fresher yttrium solution. The G''/G' ratio is less than unity for the older solution but greater than 1 for the fresher sample, indicating that the former solution has a more gel-like character. The high viscosity sample gives better fired thick-film superconducting properties but has a shorter shelf life. Measurements on yttrium components of different age show differences in viscosity and G''/G' which correlate with the behavior of the oxide precursors. Reshearing the precursor solution at any stage during its gelation process can cause irreversible changes in the gel structure

Subdecoherence time generation and detection of orbital entanglement in quantum dots.

Science.gov (United States)

Brange, F; Malkoc, O; Samuelsson, P

2015-05-01

Recent experiments have demonstrated subdecoherence time control of individual single-electron orbital qubits. Here we propose a quantum-dot-based scheme for generation and detection of pairs of orbitally entangled electrons on a time scale much shorter than the decoherence time. The electrons are entangled, via two-particle interference, and transferred to the detectors during a single cotunneling event, making the scheme insensitive to charge noise. For sufficiently long detector dot lifetimes, cross-correlation detection of the dot charges can be performed with real-time counting techniques, providing for an unambiguous short-time Bell inequality test of orbital entanglement.

Assessment of the methods for determining net radiation at different time-scales of meteorological variables

Directory of Open Access Journals (Sweden)

Ni An

2017-04-01

Full Text Available When modeling the soil/atmosphere interaction, it is of paramount importance to determine the net radiation flux. There are two common calculation methods for this purpose. Method 1 relies on use of air temperature, while Method 2 relies on use of both air and soil temperatures. Nowadays, there has been no consensus on the application of these two methods. In this study, the half-hourly data of solar radiation recorded at an experimental embankment are used to calculate the net radiation and long-wave radiation at different time-scales (half-hourly, hourly, and daily using the two methods. The results show that, compared with Method 2 which has been widely adopted in agronomical, geotechnical and geo-environmental applications, Method 1 is more feasible for its simplicity and accuracy at shorter time-scale. Moreover, in case of longer time-scale, daily for instance, less variations of net radiation and long-wave radiation are obtained, suggesting that no detailed soil temperature variations can be obtained. In other words, shorter time-scales are preferred in determining net radiation flux.

Factors Influencing Time-to-diagnosis of Biliary Atresia.

Science.gov (United States)

Harpavat, Sanjiv; Lupo, Philip J; Liwanag, Loriel; Hollier, John; Brandt, Mary L; Finegold, Milton J; Shneider, Benjamin L

2018-06-01

Diagnosing biliary atresia (BA) quickly is critical, because earlier treatment correlates with delayed or reduced need for liver transplantation. However, diagnosing BA quickly is also difficult, with infants usually treated after 60 days of life. In this study, we aim to accelerate BA diagnosis and treatment, by better understanding factors influencing the diagnostic timeline. Infants born between 2007 and 2014 and diagnosed with BA at our institution were included (n = 65). Two periods were examined retrospectively: P1, the time from birth to specialist referral, and P2, the time from specialist referral to treatment. How sociodemographic factors associate with P1 and P2 were analyzed with Kaplan-Meier curves and Cox proportional hazard models. In addition, to better characterize P2, laboratory results and early tissue histology were studied. P1 associated with race/ethnicity, with shorter times in non-Hispanic white infants compared to non-Hispanic black and Hispanic infants (P = 0.007 and P = 0.004, respectively). P2 associated with referral age, with shorter times in infants referred after 30, 45, or 60 days of life (P P2 in infants referred ≤30 days is that aminotransferase levels were normal or near-normal. However, despite reassuring laboratory values, tissue histology in early cases showed key features of BA. Our findings suggest 2 opportunities to accelerate BA diagnosis and treatment. First, to achieve prompt referrals for all races/ethnicities, universal screening strategies should be considered. Second, to ensure efficient evaluations independent of age, algorithms designed to detect early features of BA can be developed.

Vreme reagovanja vojnika vozača / Reacting time of military solders

Directory of Open Access Journals (Sweden)

Radomir S. Gordić

2006-10-01

Full Text Available Bezbednost vojnog saobraćaja i upravljanje kretanjem zavise od vremena reagovanja vojnika vozača. Vojnici vozači su selekcionirana grupa vozača, pa se smatra daje njihovo vreme reagovanja kraće od vremena reagovanja generalne populacije vozača i od normativnog vremena reagovanja, koje se koristi u analizama. Zbog toga je izvršeno merenje vremena reagovanja vojnika vozača kočenjem, s ciljem da se sagleda njegov uticaj na bezbednost saobraćaja i na upravljanje saobraćajnim tokovima, kao i da se stručna javnost upozna sa dobijenim rezultatima. U radu su prikazani rezultati merenja vremena reagovanja vojnika vozača kočenjem, za slučajno odabranu grupu, u realnim uslovima. / Safety in military traffic and its management depends on the reaction time of military drivers. Military drivers are a selected group of soldiers, so it is considered that their reaction time is shorter than the reaction time of general drivers population and it is also shorter than the normative reaction time, which is used in the analyses. Therefore, the stopping time of military drivers was tested, in aider to see the influence on traffic safety and management of traffic courses, and to interest the professionals in the given results. In the essay results of stopping time in the real conditions for a random chosen group of military drivers are shown.

Study of the photoexcited carrier dynamics in InP:Fe using time-resolved reflection and photoluminescence spectra

International Nuclear Information System (INIS)

Huang Shihua; Li Xi; Lu Fang

2004-01-01

The photoexcited carrier dynamics and photoluminescence of the undoped InP and Fe implanted InP was studied by time-resolved reflection and photoluminescence spectra. The decay times of reflection recovery and the radiative recombination for Fe implanted InP are shorter than those of undoped InP. Considering the surface recombination, a model was developed to simulate the reflection recovery dynamics, it agrees with the experimental results very well. Moreover, we obtained the ambipolar diffusion coefficient and the surface recombination velocity by using the model. For Fe-doped InP, the surface recombination velocity is much larger than that for the undoped InP, which is probably due to Fe 2+/3+ trapping centers and the large surface band bending. The PL decay time for Fe implanted InP is shorter than that for undoped InP, which is ascribed to the capture centers introduced by metallic precipitates

Elevated CD147 expression is associated with shorter overall survival in non-small cell lung cancer.

Science.gov (United States)

Zhang, Xiaojun; Tian, Tian; Zhang, Xiaofeng; Liu, Changting; Fang, Xiangqun

2017-06-06

A number of studies have reported on the prognostic role of CD147 expression in non-small cell lung cancer (NSCLC); however, the results remain controversial. This study aims to investigate the impact of CD147 on the prognosis of NSCLC by means of a meta-analysis. A literature search was performed for relevant studies published before October 29, 2016. The hazard ratios (HRs), odds ratios (ORs), and 95% confidence intervals (CIs) were calculated as effective measures. Sensitivity analysis and publication bias examination were also conducted. Ten eligible studies with a total of 1605 patients were included in this meta-analysis. CD147 overexpression was correlated with poor overall survival (OS) (HR=1.59, 95% CI=1.32-1.91, pCD147 expression was associated with the presence of lymph node metastasis (OR=2.31, 95% CI=1.74-3.07, pCD147 and sex, age, differentiation, or histology was found. No evidence of significant publication bias was identified. This meta-analysis revealed that overexpression of CD147 was associated with shorter OS, the presence of lymph node metastasis and advanced TNM stage in NSCLC. Therefore, CD147 could serve as a potential prognostic marker for NSCLC.

Travel Times for Screening Mammography: Impact of Geographic Expansion by a Large Academic Health System.

Science.gov (United States)

Rosenkrantz, Andrew B; Liang, Yu; Duszak, Richard; Recht, Michael P

2017-09-01

This study aims to assess the impact of off-campus facility expansion by a large academic health system on patient travel times for screening mammography. Screening mammograms performed from 2013 to 2015 and associated patient demographics were identified using the NYU Langone Medical Center Enterprise Data Warehouse. During this time, the system's number of mammography facilities increased from 6 to 19, reflecting expansion beyond Manhattan throughout the New York metropolitan region. Geocoding software was used to estimate driving times from patients' homes to imaging facilities. For 147,566 screening mammograms, the mean estimated patient travel time was 19.9 ± 15.2 minutes. With facility expansion, travel times declined significantly (P travel times between such subgroups. However, travel times to pre-expansion facilities remained stable (initial: 26.8 ± 18.9 minutes, final: 26.7 ± 18.6 minutes). Among women undergoing mammography before and after expansion, travel times were shorter for the postexpansion mammogram in only 6.3%, but this rate varied significantly (all P travel burden and reduce travel time variation among sociodemographic populations. Nonetheless, existing patients strongly tend to return to established facilities despite potentially shorter travel time locations, suggesting strong site loyalty. Variation in travel times likely relates to various factors other than facility proximity. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

Relationship Between Final Performance and Block Times with the Traditional and the New Starting Platforms with A Back Plate in International Swimming Championship 50-M and 100-M Freestyle Events

Science.gov (United States)

Garcia-Hermoso, Antonio; Escalante, Yolanda; Arellano, Raul; Navarro, Fernando; Domínguez, Ana M.; Saavedra, Jose M.

2013-01-01

The purpose of this study was to investigate the association between block time and final performance for each sex in 50-m and 100-m individual freestyle, distinguishing between classification (1st to 3rd, 4th to 8th, 9th to 16th) and type of starting platform (old and new) in international competitions. Twenty-six international competitions covering a 13-year period (2000-2012) were analysed retrospectively. The data corresponded to a total of 1657 swimmers’ competition histories. A two-way ANOVA (sex x classification) was performed for each event and starting platform with the Bonferroni post-hoc test, and another two-way ANOVA for sex and starting platform (sex x starting platform). Pearson’s simple correlation coefficient was used to determine correlations between the block time and the final performance. Finally, a simple linear regression analysis was done between the final time and the block time for each sex and platform. The men had shorter starting block times than the women in both events and from both platforms. For 50-m event, medalists had shorter block times than semi- finalists with the old starting platforms. Block times were directly related to performance with the old starting platforms. With the new starting platforms, however, the relationship was inverse, notably in the women’s 50-m event. The block time was related for final performance in the men’s 50- m event with the old starting platform, but with the new platform it was critical only for the women’s 50-m event. Key Points The men had shorter block times than the women in both events and with both platforms. For both distances, the swimmers had shorter block times in their starts from the new starting platform with a back plate than with the old platform. For the 50-m event with the old starting platform, the medalists had shorter block times than the semi-finalists. The new starting platform block time was only determinant in the women’s 50-m event. In order to improve

Significance of Glucose Addition on Chitosan-Glycerophosphate Hydrogel Properties

Directory of Open Access Journals (Sweden)

Dian Susanthy

2016-03-01

Full Text Available Chitosan-glycerophosphate hydrogel can be used as dental scaffold due to its thermosensitivity, gelation performance at body temperature, suitable acidity for body condition, biocompatibility, and ability to provide good environment for cell proliferation and differentiation. Previous study showed that glucose addition to the chitosan solution before steam sterilization improved its hydrogel mechanical strength. However, the effectiveness of glucose addition was still doubted because glucose might undergo Maillard reaction in that particular condition. The aims of this study are to confirm whether the glucose addition can increase the hydrogel mechanical strength and gelation rate effectively and also to compare their performance to be dental scaffold. This research was performed through several steps, namely preparation of chitosan-glycerophosphate solution, addition of glucose, gelation time test, gel mechanical strength measurement, functional group analysis, and physical properties measurements (pH, viscosity, and pore size. The result showed that glucose addition did not improve the hydrogel mechanical strength and gelation rate, neither when it was added before nor after steam sterilization. Glucose addition before steam sterilization seemed to trigger Maillard reaction or browning effect, while glucose addition after steam sterilization increased the amount of free water molecules in the hydrogel. Chitosan and glycerophosphate interact physically, but interaction between chitosan and glucose seems to occur chemically and followed by the formation of free water molecules. Glucose addition decreases the solution viscosity and hydrogel pore size so the hydrogel performance as dental scaffold is lowered.

A cell-compatible PEO–PPO–PEO (Pluronic®)-based hydrogel stabilized through secondary structures

International Nuclear Information System (INIS)

Peng, Sydney; Lin, Ji-Yu; Cheng, Ming-Huei; Wu, Chih-Wei; Chu, I-Ming

2016-01-01

Pluronic F-127 (PF127) is a thermosensitive polymer that has been widely recognized as a potential candidate for various bio-applications. However, in hydrogel form, its rapid disintegration and inhospitality toward cells have significantly limited its usage. As a means to increase the integrity and cell compatibility of a PF127 hydrogel, we propose the introduction of stabilizing secondary structures to the gel network by the addition of secondary structure-forming oligo-alanine and oligo-phenylalanine. Results indicate that increasing the oligo(peptides) attached to PF127 led to a significant decrease in the gelation concentration and temperature. A selected oligo(peptide)-modified PF127 was capable of forming a stable hydrogel network at 5% and suffered only 20% weight loss after 7 days of incubation in media. Scanning electron microscopy (SEM) revealed comparably more interconnected morphology in modified hydrogels which may be attributed to the presence of secondary structures, as verified by circular dichroism (CD) and Fourier-transformed infrared (FT-IR) spectroscopy. Nuclear magnetic resonance (NMR) provided insights into the extensive interactions at the micelle core, which is the key to altered gelation behavior. Furthermore, modified hydrogels maintained structural integrity within culturing media and supported the proliferation of encapsulated chondrocytes. In addition, in vivo residence time was extended to well beyond 2 weeks after oligo(peptide) modification, thereby broadening the application scope of the PF127 hydrogel to encompass long-term drug delivery and cell culturing. - Highlights: • Modification of Pluronic-F127 with oligo(peptides) decreased gelation concentration and prolonged residence time in vitro and in vivo. • Oligo(peptide)-modified Pluronic-F127 exhibited critical gelation concentration as low as 5%. • Cells encapsulated within 5% oligo(peptide)-modified hydrogel proliferated within a period of 7 days. • Oligo

A cell-compatible PEO–PPO–PEO (Pluronic®)-based hydrogel stabilized through secondary structures

Energy Technology Data Exchange (ETDEWEB)

Peng, Sydney; Lin, Ji-Yu [Deparment of Chemical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Cheng, Ming-Huei [Division of Microsurgery Reconstructive Microsurgery, Department of Plastic and Reconstructive Surgery, Chang Gung Memorial Hospital, College of Medicine, Chang Gung University, Taoyuan, Taiwan (China); Center for Tissue Engineering, Chang Gung Memorial Hospital, Taoyuan, Taiwan (China); Wu, Chih-Wei, E-mail: drwu.jerry@gmail.com [Division of Microsurgery Reconstructive Microsurgery, Department of Plastic and Reconstructive Surgery, Chang Gung Memorial Hospital, College of Medicine, Chang Gung University, Taoyuan, Taiwan (China); Center for Tissue Engineering, Chang Gung Memorial Hospital, Taoyuan, Taiwan (China); Chu, I-Ming, E-mail: chuiming456@gmail.com [Deparment of Chemical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan (China)

2016-12-01

Pluronic F-127 (PF127) is a thermosensitive polymer that has been widely recognized as a potential candidate for various bio-applications. However, in hydrogel form, its rapid disintegration and inhospitality toward cells have significantly limited its usage. As a means to increase the integrity and cell compatibility of a PF127 hydrogel, we propose the introduction of stabilizing secondary structures to the gel network by the addition of secondary structure-forming oligo-alanine and oligo-phenylalanine. Results indicate that increasing the oligo(peptides) attached to PF127 led to a significant decrease in the gelation concentration and temperature. A selected oligo(peptide)-modified PF127 was capable of forming a stable hydrogel network at 5% and suffered only 20% weight loss after 7 days of incubation in media. Scanning electron microscopy (SEM) revealed comparably more interconnected morphology in modified hydrogels which may be attributed to the presence of secondary structures, as verified by circular dichroism (CD) and Fourier-transformed infrared (FT-IR) spectroscopy. Nuclear magnetic resonance (NMR) provided insights into the extensive interactions at the micelle core, which is the key to altered gelation behavior. Furthermore, modified hydrogels maintained structural integrity within culturing media and supported the proliferation of encapsulated chondrocytes. In addition, in vivo residence time was extended to well beyond 2 weeks after oligo(peptide) modification, thereby broadening the application scope of the PF127 hydrogel to encompass long-term drug delivery and cell culturing. - Highlights: • Modification of Pluronic-F127 with oligo(peptides) decreased gelation concentration and prolonged residence time in vitro and in vivo. • Oligo(peptide)-modified Pluronic-F127 exhibited critical gelation concentration as low as 5%. • Cells encapsulated within 5% oligo(peptide)-modified hydrogel proliferated within a period of 7 days. • Oligo

Shorter Hospital Stays and Lower Costs for Rivaroxaban Compared With Warfarin for Venous Thrombosis Admissions.

Science.gov (United States)

Margolis, Jay M; Deitelzweig, Steven; Kline, Jeffrey; Tran, Oth; Smith, David M; Bookhart, Brahim; Crivera, Concetta; Schein, Jeff

2016-10-06

Venous thromboembolism, including deep vein thrombosis and pulmonary embolism, results in a substantial healthcare system burden. This retrospective observational study compared hospital length of stay (LOS) and hospitalization costs for patients with venous thromboembolism treated with rivaroxaban versus those treated with warfarin. Hospitalizations for adult patients with a primary diagnosis of deep vein thrombosis or pulmonary embolism who were initiated on rivaroxaban or warfarin were selected from MarketScan's Hospital Drug Database between November 1, 2012, and December 31, 2013. Patients treated with warfarin were matched 1:1 to patients treated with rivaroxaban using exact and propensity score matching. Hospital LOS, time from first dose to discharge, and hospitalization costs were reported descriptively and with generalized linear models (GLMs). The final study cohorts each included 1223 patients (751 with pulmonary embolism and 472 with deep vein thrombosis). Cohorts were well matched for demographic and clinical characteristics. Mean (±SD) LOS was 3.7±3.1 days for patients taking rivaroxaban and 5.2±3.7 days for patients taking warfarin, confirmed by GLM-adjusted results (rivaroxaban 3.7 days, warfarin 5.3 days, P<0.001). Patients with provoked venous thromboembolism admissions showed longer LOSs (rivaroxaban 5.1±4.5 days, warfarin 6.5±5.6 days, P<0.001) than those with unprovoked venous thromboembolism (rivaroxaban 3.3±2.4 days, warfarin 4.8±2.8 days, P<0.001). Days from first dose to discharge were 2.4±1.7 for patients treated with rivaroxaban and 3.9±3.7 for patients treated with warfarin when initiated with parenteral anticoagulants (P<0.001), and 2.7±1.7 and 3.7±2.1, respectively, when initiated without parenteral anticoagulants (P<0.001). Patients initiated on rivaroxaban incurred significantly lower mean total hospitalization costs ($8688±$9927 versus $9823±$9319, P=0.004), confirmed by modeling (rivaroxaban $8387 [95

Force-Time Entropy of Isometric Impulse.

Science.gov (United States)

Hsieh, Tsung-Yu; Newell, Karl M

2016-01-01

The relation between force and temporal variability in discrete impulse production has been viewed as independent (R. A. Schmidt, H. Zelaznik, B. Hawkins, J. S. Frank, & J. T. Quinn, 1979 ) or dependent on the rate of force (L. G. Carlton & K. M. Newell, 1993 ). Two experiments in an isometric single finger force task investigated the joint force-time entropy with (a) fixed time to peak force and different percentages of force level and (b) fixed percentage of force level and different times to peak force. The results showed that the peak force variability increased either with the increment of force level or through a shorter time to peak force that also reduced timing error variability. The peak force entropy and entropy of time to peak force increased on the respective dimension as the parameter conditions approached either maximum force or a minimum rate of force production. The findings show that force error and timing error are dependent but complementary when considered in the same framework with the joint force-time entropy at a minimum in the middle parameter range of discrete impulse.

Selective binding of carotenoids with a shorter conjugated chain to the LH2 antenna complex and those with a longer conjugated chain to the reaction center from Rubrivivax gelatinosus.

Science.gov (United States)

Kakitani, Yoshinori; Fujii, Ritsuko; Hayakawa, Yoshihiro; Kurahashi, Masahiro; Koyama, Yasushi; Harada, Jiro; Shimada, Keizo

2007-06-19

Rubrivivax gelatinosus having both the spheroidene and spirilloxanthin biosynthetic pathways produces carotenoids (Cars) with a variety of conjugated chains, which consist of different numbers of conjugated double bonds (n), including the C=C (m) and C=O (o) bonds. When grown under anaerobic conditions, the wild type produces Cars for which n = m = 9-13, whereas under semiaerobic conditions, it additionally produces Cars for which n = m + o = 10 + 1, 13 + 1, and 13 + 2. On the other hand, a mutant, in which the latter pathway is genetically blocked, produces only Cars for which n = 9 and 10 under anaerobic conditions and n = 9, 10, and 10 + 1 under semianaerobic conditions. Those Cars that were extracted from the LH2 complex (LH2) and the reaction center (RC), isolated from the wild-type and the mutant Rvi. gelatinosus, were analyzed by HPLC, and their structures were determined by mass spectrometry and 1H NMR spectroscopy. The selective binding of Cars to those pigment-protein complexes has been characterized as follows. (1) Cars with a shorter conjugated chain are selectively bound to LH2 whereas Cars with a longer conjugated chain to the RC. (2) Shorter chain Cars with a hydroxyl group are bound to LH2 almost exclusively. This rule holds either in the absence or in the presence of the keto group. The natural selection of shorter chain Cars by LH2 and longer chain Cars by the RC is discussed, on the basis of the results now available, in relation to the light-harvesting and photoprotective functions of Cars.

Time-Separating Heating and Sensor Functions of Thermistors in Precision Thermal Control Applications

Science.gov (United States)

Cho, Hyung J.; Sukhatme, Kalyani G.; Mahoney, John C.; Penanen, Konstantin Penanen; Vargas, Rudolph, Jr.

2010-01-01

A method allows combining the functions of a heater and a thermometer in a single device, a thermistor, with minimal temperature read errors. Because thermistors typically have a much smaller thermal mass than the objects they monitor, the thermal time to equilibrate the thermometer to the temperature of the object is typically much shorter than the thermal time of the object to change its temperature in response to an external perturbation.

Transdermal thiol-acrylate polyethylene glycol hydrogel synthesis using near infrared light

Science.gov (United States)

Chung, Solchan; Lee, Hwangjae; Kim, Hyung-Seok; Kim, Min-Gon; Lee, Luke P.; Lee, Jae Young

2016-07-01

Light-induced polymerization has been widely applied for hydrogel synthesis, which conventionally involves the use of ultraviolet or visible light to activate a photoinitiator for polymerization. However, with these light sources, transdermal gelation is not efficient and feasible due to their substantial interactions with biological systems, and thus a high power is required. In this study, we used biocompatible and tissue-penetrating near infrared (NIR) light to remotely trigger a thiol-acrylate reaction for efficient in vivo gelation with good controllability. Our gelation system includes gold nanorods as a photothermal agent, a thermal initiator, diacrylate polyethylene glycol (PEG), and thiolated PEG. Irradiation with a low-power NIR laser (0.3 W cm-2) could induce gelation via a mixed-mode reaction with a small increase in temperature (~5 °C) under the optimized conditions. We also achieved successful transdermal gelation via the NIR-assisted photothermal thiol-acryl reactions. This new type of NIR-assisted thiol-acrylate polymerization provides new opportunities for in situ hydrogel formation for injectable hydrogels and delivery of drugs/cells for various biomedical applications.Light-induced polymerization has been widely applied for hydrogel synthesis, which conventionally involves the use of ultraviolet or visible light to activate a photoinitiator for polymerization. However, with these light sources, transdermal gelation is not efficient and feasible due to their substantial interactions with biological systems, and thus a high power is required. In this study, we used biocompatible and tissue-penetrating near infrared (NIR) light to remotely trigger a thiol-acrylate reaction for efficient in vivo gelation with good controllability. Our gelation system includes gold nanorods as a photothermal agent, a thermal initiator, diacrylate polyethylene glycol (PEG), and thiolated PEG. Irradiation with a low-power NIR laser (0.3 W cm-2) could induce gelation

Fully phase-encoded MRI near metallic implants using ultrashort echo times and broadband excitation.

Science.gov (United States)

Wiens, Curtis N; Artz, Nathan S; Jang, Hyungseok; McMillan, Alan B; Koch, Kevin M; Reeder, Scott B

2018-04-01

To develop a fully phase-encoded MRI method for distortion-free imaging near metallic implants, in clinically feasible acquisition times. An accelerated 3D fully phase-encoded acquisition with broadband excitation and ultrashort echo times is presented, which uses a broadband radiofrequency pulse to excite the entire off-resonance induced by the metallic implant. Furthermore, fully phase-encoded imaging is used to prevent distortions caused by frequency encoding, and to obtain ultrashort echo times for rapidly decaying signal. Phantom and in vivo acquisitions were used to describe the relationship among excitation bandwidth, signal loss near metallic implants, and T 1 weighting. Shorter radiofrequency pulses captured signal closer to the implant by improving spectral coverage and allowing shorter echo times, whereas longer pulses improved T 1 weighting through larger maximum attainable flip angles. Comparisons of fully phase-encoded acquisition with broadband excitation and ultrashort echo times to T 1 -weighted multi-acquisition with variable resonance image combination selective were performed in phantoms and subjects with metallic knee and hip prostheses. These acquisitions had similar contrast and acquisition efficiency. Accelerated fully phase-encoded acquisitions with ultrashort echo times and broadband excitation can generate distortion free images near metallic implants in clinically feasible acquisition times. Magn Reson Med 79:2156-2163, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

Comparison of selected physico-chemical properties of calcium alginate films prepared by two different methods.

Science.gov (United States)

Crossingham, Yazmin J; Kerr, Philip G; Kennedy, Ross A

2014-10-01

Sodium alginate (SA) is a naturally occurring, non-toxic, polysaccharide that is able to form gels after exposure to calcium. These gels have been used in food and biomedical industries. This is the first direct comparison of two different methods of calcium alginate film production, namely interfacial gelation (IFG) and dry cast gelation (DCG). IFG films were significantly thicker than DCG films, and were more extensively rehydrated in water and 0.1M HCl than the DCG films. During rehydration in 0.1M HCl almost all calcium ions were lost. Under scanning electron microscopy, IFG films appeared less dense than DCG films. IFG films were mechanically weaker than DCG films, and both types of film were weaker after rehydration in 0.1M HCl compared with deionized water. Permeation of theophylline (TPL) was evaluated in-vitro; the diffusion coefficient (D) of the TPL was almost 90 times lower in DCG films than IFG films when both were rehydrated in water. Although the 0.1M HCl rendered both gels more permeable to TPL, D of TPL was still about five times lower in DCG compared to IFG films. The evaluation of selected physico-chemical properties of films is important, since this information may inform the choice of gelation technique used to produce calcium alginate coatings on pharmaceutical products. Copyright © 2014 Elsevier B.V. All rights reserved.

Real time wave forecasting using wind time history and numerical model

Science.gov (United States)

Jain, Pooja; Deo, M. C.; Latha, G.; Rajendran, V.

Operational activities in the ocean like planning for structural repairs or fishing expeditions require real time prediction of waves over typical time duration of say a few hours. Such predictions can be made by using a numerical model or a time series model employing continuously recorded waves. This paper presents another option to do so and it is based on a different time series approach in which the input is in the form of preceding wind speed and wind direction observations. This would be useful for those stations where the costly wave buoys are not deployed and instead only meteorological buoys measuring wind are moored. The technique employs alternative artificial intelligence approaches of an artificial neural network (ANN), genetic programming (GP) and model tree (MT) to carry out the time series modeling of wind to obtain waves. Wind observations at four offshore sites along the east coast of India were used. For calibration purpose the wave data was generated using a numerical model. The predicted waves obtained using the proposed time series models when compared with the numerically generated waves showed good resemblance in terms of the selected error criteria. Large differences across the chosen techniques of ANN, GP, MT were not noticed. Wave hindcasting at the same time step and the predictions over shorter lead times were better than the predictions over longer lead times. The proposed method is a cost effective and convenient option when a site-specific information is desired.

Propofol for procedural sedation and analgesia reduced dedicated emergency nursing time while maintaining safety in a community emergency department.

Science.gov (United States)

Reynolds, Joshua C; Abraham, Michael K; Barrueto, Fermin F; Lemkin, Daniel L; Hirshon, Jon M

2013-09-01

Procedural sedation and analgesia is a core competency in emergency medicine. Propofol is replacing midazolam in many emergency departments. Barriers to performing procedural sedation include resource utilization. We hypothesized that emergency nursing time is shorter with propofol than midazolam, without increasing complications. Retrospective analysis of a procedural sedation registry for two community emergency departments with combined census of 100,000 patients/year. Demographics, procedure, and ASA physical classification status of adult patients receiving procedural sedation between 2007-2010 with midazolam or propofol were analyzed. Primary outcome was dedicated emergency nursing time. Secondary outcomes were procedural success, ED length of stay, and complication rate. Comparative statistics were performed with Mann-Whitney, Kruskal-Wallis, chi-square, or Fisher's exact test. Linear regression was performed with log-transformed procedural sedation time to define predictors. Of 328 procedural sedation and analgesia, 316 met inclusion criteria, of which 60 received midazolam and 256 propofol. Sex distribution varied between groups (midazolam 3% male; propofol 55% male; P = 0.04). Age, procedure, and ASA status were not significantly different. Propofol had shorter procedural sedation time (propofol 32.5 ± 24.2 minutes; midazolam 78.7 ± 51.5 minutes; P differences between complication rates (propofol 14%; midazolam 13%; P = 0.88) or emergency department length of stay (propofol 262.5 ± 132.8 minutes; midazolam 288.6 ± 130.6 minutes; P = 0.09). Use of propofol resulted in shorter emergency nursing time and higher procedural success rate than midazolam with a comparable safety profile. Copyright © 2013 Emergency Nurses Association. Published by Mosby, Inc. All rights reserved.

Impact of sludge retention time on sludge characteristics and microbial community in MBR.

Science.gov (United States)

Su, Yuchun; Pan, Jill Ruhsing; Huang, Chihpin; Chang, Chialing

2011-01-01

In this study, the impact of sludge retention time (SRT) on sludge characteristics and microbial community and the effect on membrane fouling in membrane bioreactor (MBR) was investigated. The results show that MBR with longer SRT has less fouling propensity, in agreement with other studies, despite the fact that the MBR with longer SRT contained higher MLSS and smaller particle size. However, much more soluble microbial products (SMPs) were released in MBR with shorter SRT. More slime on the membrane surface was observed in MBR with shorter SRT while sludge cakes formed on the membrane surface in MBR with longer SRT. The results show that SMP contributes to the severe fouling observed in MBR with shorter SRT, which is in agreement with other studies showing that SMPs were the major foulants in MBR. Under different SRTs of operation, the bacterial community structures of the sludge obtained by use of polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) were almost identical, but those on the membrane surface differed substantially. It suggests that, although SRT has impact on sludge characteristics, it doesn't affect the microbial community in the suspension.

Interactive vs passive screen time and nighttime sleep duration among school-aged children.

Science.gov (United States)

Yland, Jennifer; Guan, Stanford; Emanuele, Erin; Hale, Lauren

2015-09-01

Insufficient sleep among school-aged children is a growing concern, as numerous studies have shown that chronic short sleep duration increases the risk of poor academic performance and specific adverse health outcomes. We examined the association between weekday nighttime sleep duration and 3 types of screen exposure: television, computer use, and video gaming. We used age 9 data from an ethnically diverse national birth cohort study, the Fragile Families and Child Wellbeing Study, to assess the association between screen time and sleep duration among 9-year-olds, using screen time data reported by both the child (n = 3269) and by the child's primary caregiver (n= 2770). Within the child-reported models, children who watched more than 2 hours of television per day had shorter sleep duration by approximately 11 minutes per night compared to those who watched less than 2 hours of television (β = -0.18; P computer use were associated with reduced sleep duration. For both child- and parent-reported screen time measures, we did not find statistically significant differences in effect size across various types of screen time. Screen time from televisions and computers is associated with reduced sleep duration among 9-year-olds, using 2 sources of estimates of screen time exposure (child and parent reports). No specific type or use of screen time resulted in significantly shorter sleep duration than another, suggesting that caution should be advised against excessive use of all screens.

Time-limited optimal dynamics beyond the Quantum Speed Limit

DEFF Research Database (Denmark)

Gajdacz, Miroslav; Das, Kunal K.; Arlt, Jan

2015-01-01

The quantum speed limit sets the minimum time required to transfer a quantum system completely into a given target state. At shorter times the higher operation speed has to be paid with a loss of fidelity. Here we quantify the trade-off between the fidelity and the duration in a system driven......-off expressed in terms of the direct Hilbert velocity provides a robust prediction of the quantum speed limit and allows to adapt the control optimization such that it yields a predefined fidelity. The results are verified numerically in a multilevel system with a constrained Hamiltonian, and a classification...

Time Seeing a Hand Surgeon Is Not Associated With Patient Satisfaction.

Science.gov (United States)

Teunis, Teun; Thornton, Emily R; Jayakumar, Prakash; Ring, David

2015-07-01

Previous studies, predominantly in the primary care setting, identified time spent with the physician as an important predictor of satisfaction. It is unknown if the same holds true in hand surgery. Is patient satisfaction measured immediately after an office visit associated with the duration of time spent with the hand surgeon? What other factors are associated with satisfaction directly after the visits and 2 weeks after the appointment? We prospectively enrolled 81 patients visiting our hand and upper extremity surgery outpatient clinic. We recorded their demographics and measured physical function, pain behavior, symptoms of depression, time spent in the waiting room, time spent with the physician, and patient satisfaction. Office times were measured using our patient ambulatory tracking system and by a research assistant outside the clinic room. To assess satisfaction we used items from the Consumer Assessment of Healthcare Providers and Systems survey (a federally developed standardized survey instrument) relevant to our study. Two weeks later, 51 (64%) patients were available for telephone followup and the same measures were completed. Mean time spent with the hand surgeon was 8 ± 5 minutes and mean in-office wait time to see the hand surgeon was 32 ± 18 minutes. A priori power analyses indicated that 77 patients would provide 80% power to detect an effect size f(2) = 0.18 for a regression with five predictors. This means that we would detect time spent with the physician as a significant factor if it accounted for 7% or more of the variability in satisfaction. Time spent with the hand surgeon was not associated with patient satisfaction measured directly after the visit (r = -0.023; p = 0.84). Longer time waiting to see the physician correlated with decreased patient satisfaction (r = -0.30; p = 0.0057). The final multivariable model for increased satisfaction directly after the office visit included shorter waiting time (regression coefficient [β] -0

Shorter duration of non-rapid eye movement sleep slow waves in EphA4 knockout mice.

Science.gov (United States)

Freyburger, Marlène; Poirier, Gaétan; Carrier, Julie; Mongrain, Valérie

2017-10-01

Slow waves occurring during non-rapid eye movement sleep have been associated with neurobehavioural performance and memory. In addition, the duration of previous wakefulness and sleep impacts characteristics of these slow waves. However, molecular mechanisms regulating the dynamics of slow-wave characteristics remain poorly understood. The EphA4 receptor regulates glutamatergic transmission and synaptic plasticity, which have both been linked to sleep slow waves. To investigate if EphA4 regulates slow-wave characteristics during non-rapid eye movement sleep, we compared individual parameters of slow waves between EphA4 knockout mice and wild-type littermates under baseline conditions and after a 6-h sleep deprivation. We observed that, compared with wild-type mice, knockout mice display a shorter duration of positive and negative phases of slow waves under baseline conditions and after sleep deprivation. However, the mutation did not change slow-wave density, amplitude and slope, and did not affect the sleep deprivation-dependent changes in slow-wave characteristics, suggesting that EphA4 is not involved in the response to elevated sleep pressure. Our present findings suggest a role for EphA4 in shaping cortical oscillations during sleep that is independent from sleep need. © 2017 European Sleep Research Society.

Adolescents' technology and face-to-face time use predict objective sleep outcomes.

Science.gov (United States)

Tavernier, Royette; Heissel, Jennifer A; Sladek, Michael R; Grant, Kathryn E; Adam, Emma K

2017-08-01

The present study examined both within- and between-person associations between adolescents' time use (technology-based activities and face-to-face interactions with friends and family) and sleep behaviors. We also assessed whether age moderated associations between adolescents' time use with friends and family and sleep. Adolescents wore an actigraph monitor and completed brief evening surveys daily for 3 consecutive days. Adolescents (N=71; mean age=14.50 years old, SD=1.84; 43.7% female) were recruited from 3 public high schools in the Midwest. We assessed 8 technology-based activities (eg, texting, working on a computer), as well as time spent engaged in face-to-face interactions with friends and family, via questions on adolescents' evening surveys. Actigraph monitors assessed 3 sleep behaviors: sleep latency, sleep hours, and sleep efficiency. Hierarchical linear models indicated that texting and working on the computer were associated with shorter sleep, whereas time spent talking on the phone predicted longer sleep. Time spent with friends predicted shorter sleep latencies, while family time predicted longer sleep latencies. Age moderated the association between time spent with friends and sleep efficiency, as well as between family time and sleep efficiency. Specifically, longer time spent interacting with friends was associated with higher sleep efficiency but only among younger adolescents. Furthermore, longer family time was associated with higher sleep efficiency but only for older adolescents. Findings are discussed in terms of the importance of regulating adolescents' technology use and improving opportunities for face-to-face interactions with friends, particularly for younger adolescents. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Time-domain analysis of frequency dependent inertial wave forces on cylinders

DEFF Research Database (Denmark)

Krenk, Steen

2013-01-01

a simple time-domain procedure for the inertial force, in which the frequency dependence is represented via a simple explicit time filter on the wave particle acceleration or velocity. The frequency dependence of the inertia coefficient is known analytically as a function of the wave......-number, and the relevant range of waves shorter than about six times the diameter typically corresponds to deep water waves. This permits a universal non-dimensional frequency representation, that is converted to rational form to provide the relevant filter equation. Simple time-domain simulations demonstrate...... the reduction of the resonant part of the response for natural structural frequencies above the dominating wave frequency....

Failure modes and natural control time for distributed vibrating systems

International Nuclear Information System (INIS)

Reid, R.M.

1994-01-01

The eigenstructure of the Gram matrix of frequency exponentials is used to study linear vibrating systems of hyperbolic type with distributed control. Using control norm as a practical measure of controllability and the vibrating string as a prototype, it is demonstrated that hyperbolic systems have a natural control time, even when only finitely many modes are excited. For shorter control times there are identifiable control failure modes which can be steered to zero only with very high cost in control norm. Both natural control time and the associated failure modes are constructed for linear fluids, strings, and beams, making note of the essential algorithms and Mathematica code, and displaying results graphically

Comparison of laparoscopic and open appendectomy in terms of operative time, hospital stay and frequency of surgical site infection

International Nuclear Information System (INIS)

Ibrahim, T.; Saleem, M.R.; Aziz, O.B.; Arshad, A.

2014-01-01

To compare laparoscopic and conventional open appendectomy in terms of operative time, hospital stay and frequency of surgical site infection (SSI). Patient and Methods: A total of 417 patients underwent appendectomy during this period. 137 patients underwent laparoscopic appendectomy (group A) while 280 patient had open appendectomy (group B). The samples include all patients who were operated open between the time span of june 2010 to september 2011. A chi square-test was performed to compare the data for statistical significance. Result: Mean operative time for group A was 79.21+-23.42 minitues where as in group B, the mean operative time was 41.49+-20.86 minitues. Group A patients had a shorter hospital 1 stay (3.6+-1 day) but in group B it was (5.2+-3 days). Seven patients (5.1 %) developed surgical site infection (SSI) in group A and 34 patients (12.14 %)developed postoperative SSI in group B. Conclusion: Laparoscopic appendectomy is superior to open appendectomy because of shorter hospital stay and laser-operative SSI, but requires longer operative time. (author)

Connectivity and theoretical physics: some applications to chemistry

International Nuclear Information System (INIS)

Stanley, H.E.; Coniglio, A.; Klein, W.; Teixeira, J.

1981-01-01

Two classical problems are treated, viz., the polymer gelation and the polymer gelation and the liquid water. In both problems, the concept of connectivity and generalized percolation has been used. (L.C.) [pt

Cement paste prior to setting: A rheological approach

Energy Technology Data Exchange (ETDEWEB)

Bellotto, Maurizio, E-mail: maurizio.bellotto@bozzetto.it

2013-10-15

The evolution of cement paste during the dormant period is analyzed via small amplitude oscillation rheological measurements. Cement paste, from the very first moments after mixing cement and water, shows the formation of an elastic gel whose strength is rapidly increasing over time. Up to the onset of Portlandite precipitation G′(t) increases by more than 2 orders of magnitude and in the acceleratory period G′(t) continues steadily to increase. A microstructural modification is likely to occur between the dormant and the acceleratory period. At low deformations in the linearity domain the storage modulus G′(ω) exhibits a negligible frequency dependence. At higher deformations cement paste shows a yield stress which increases on increasing paste concentration. The presence of superplasticizers decreases the yield stress and increases the gelation threshold of the paste. Above the gelation threshold the evolution of cement paste with superplasticizers follows similar trends to the neat paste. -- Highlights: •The gelation of cement paste during the dormant period is analyzed via rheometry. •The observed evolution is proposed to be related to the pore structure refinement. •Similarities are observed with colloidal gels and colloidal glasses.

Construction time of PWRs

International Nuclear Information System (INIS)

Moreira, João M.L.; Gallinaro, Bruno; Carajilescov, Pedro

2013-01-01

The construction time of PWRs is studied considering published data about nuclear power plants in the world. For the 268 PWRs in operation in 2010, the mode of the construction time distribution is around 5–6 years, and 80% of the plants were built in less than 120 months. To circumvent the problem of comparing plants with different size we normalized the construction time to plants with 1 GW. We restricted the analysis to 201 PWRs which suffered less from external factors that were beyond the control of the management from 1965 to 2010. The results showed that the normalized construction time did not increase over the years and nor with the plants’ gross power level. The learning rate of the industry regarding normalized construction times showed a reduction with 95% confidence level of about 0.56±0.07 months for each 10 GW of installed capacity. Over the years the normalized construction time decreased and became more predictable. The data showed that countries with more centralized regulatory, construction and operation environments were able to build PWRs in shorter times. Countries less experienced with the nuclear technology built PWRs in longer times. - Highlights: ► The construction time of PWRs is analyzed based on historical data. ► Different factors affecting construction time are considered in the analyses. ► The normalized construction time of PWRs decreased with time and gross power level. ► Countries with more centralized institutions built PWRs more quickly

Thermoreversible gelation polymer as an embolic material for aneurysm treatment: a delivery device for dermal fibroblasts and basic fibroblast growing factor into experimental aneurysms in rats.

Science.gov (United States)

Dobashi, Hisashi; Akasaki, Yasuharu; Yuki, Ichiro; Arai, Takao; Ohashi, Hiroki; Murayama, Yuichi; Takao, Hiroyuki; Abe, Toshiaki

2013-11-01

This study evaluates whether thermoreversible gelation polymer (TGP) can be used as a delivery device to deploy dermal fibroblasts and cytokines into experimental aneurysms in rats. The right common iliac artery of rats was surgically ligated and an experimental aneurysm was created by applying exogenous elastase. Seven days later, two aneurysms were harvested and used as controls (Group A), two were embolized with pure TGP (Group B), two were embolized with TGP and basic fibroblast growth factor (bFGF) (Group C) and two were embolized with TGP loaded with rat dermal fibroblasts (Group D). The aneurysms were also embolized with TGP mixed with dermal fibroblasts and bFGF at different concentrations (10 ng/ml: Group E (n=2), 100 ng/ml: Group F (n=2), 1000 ng/ml: Group G (n=2)). Each aneurysm sample was harvested after 7 days and histologic analyses were performed. The most advanced thrombus organization in the aneurysm, such as prominent fibroblast proliferation and collagen deposition, was observed in Groups E, F and G, although there was no noticeable difference between the groups. Moderate thrombus organization was seen in Group D and minimal thrombus organization was seen in Groups B and C. TGP mixed with both dermal fibroblasts and bFGF induced the most advanced thrombus organization in the experimental aneurysms followed by TGP mixed only with dermal fibroblasts. TGP may be useful as a delivery device to deploy fibroblasts and cytokines into aneurysms.

Climatology and time series of surface meteorology in Ny-Ålesund, Svalbard

Directory of Open Access Journals (Sweden)

M. Maturilli

2013-04-01

Full Text Available A consistent meteorological dataset of the Arctic site Ny-Ålesund (11.9° E, 78.9° N spanning the 18 yr-period 1 August 1993 to 31 July 2011 is presented. Instrumentation and data handling of temperature, humidity, wind and pressure measurements are described in detail. Monthly mean values are shown for all years to illustrate the interannual variability of the different parameters. Climatological mean values are given for temperature, humidity and pressure. From the climatological dataset, we also present the time series of annual mean temperature and humidity, revealing a temperature increase of +1.35 K per decade and an increase in water vapor mixing ratio of +0.22 g kg−1 per decade for the given time period, respectively. With the continuation of the presented measurements, the Ny-Ålesund high resolution time series will provide a reliable source to monitor Arctic change and retrieve trends in the future. The relevant data are provided in high temporal resolution as averages over 5 (1 min before (after 14 July 1998, respectively, placed on the PANGAEA repository (doi:10.1594/PANGAEA.793046. While 6 hourly synoptic observations in Ny-Ålesund by the Norwegian Meteorological Institute reach back to 1974 (Førland et al., 2011, the meteorological data presented here cover a shorter time period, but their high temporal resolution will be of value for atmospheric process studies on shorter time scales.

Carbon black selection from simulated broth solution for ADU gel spheres

International Nuclear Information System (INIS)

Chai, Jeong Kyung; Ho, Eom Sung; Kim, Yeon Ku; Cho, Moon Seoung

2012-01-01

The VHTR (Very High Temperature Gas Reactor) is one of the reactor concepts in the Gen IV International Collaboration. The nuclear fuel of a VHTR in the US is based on microspheres containing a mixture of UO 2 and UC 2 coated with multi carbon layers and a SiC layer. This mixture is called a 'UCO (uranium oxi carbide)' kernel. The fabrication process of this kernel was based on the sol-gel method between an ADUN and HMTA and urea, a process referred to as internal gelation. UCO kernel microspheres were first prepared at ORNL in the late 1970s. CB(Carbon Black) as a carbon source in the final UCO kernel is added during the broth solution preparation, in the processing of UCO kernel fabrication. The preparation of a good quality UCO kernel is very difficult due to the homogeneous distribution of carbon in a UCO kernel. The key requirement to obtain a good quality kernel is a uniform distribution of carbon in the ADU gel sphere forming process before the thermal treatment, i.e., during the gel formation step. The internal gelation concept was adapted in ADU gel sphere fabrication in the ORNL process of the US. Generally, UO 2 kernel microspheres are prepared by an internal gelation method (USA, India) or external gelation method (Germany, China, Japan). The UCO kernel microspheres prepared only in the US, use an internal gelation method. A material flow chart on the preparation of the microsphere kernel is simply shown in Fig. 1. The broth solution preparation, the raw material, additives, and thermal steps such as calcining and sintering processes were different to compared with the external gelation and internal gelation methods. In this study, we first carried out the matching CB selection experiments among the various kinds of CBs in a broth solution, for UCO kernel preparation using an external gelation method.

Gain of chromosome arm 1q in atypical meningioma correlates with shorter progression-free survival.

LENUS (Irish Health Repository)

2012-02-01

Aims: Atypical (WHO grade II) meningiomas have moderately high recurrence rates; even for completely resected tumours, approximately one-third will recur. Post-operative radiotherapy (RT) may aid local control and improve survival, but carries the risk of side effects. More accurate prediction of recurrence risk is therefore needed for patients with atypical meningioma. Previously, we used high-resolution array CGH to identify genetic variations in 47 primary atypical meningiomas and found that approximately 60% of tumors show gain of 1q at 1q25.1 and 1q25.3 to 1q32.1 and that 1q gain appeared to correlate with shorter progression-free survival. This study aimed to validate and extend these findings in an independent sample. Methods: 86 completely resected atypical meningiomas (with 25 recurrences) from two neurosurgical centres in Ireland were identified and clinical follow up was obtained. Utilizing a dual-colour interphase FISH assay, 1q gain was assessed using BAC probes directed against 1q25.1 and 1q32.1. Results: The results confirm the high prevalence of 1q gain at these loci in atypical meningiomas. We further show that gain at 1q32.1 and age each correlate with progression-free survival in patients who have undergone complete surgical resection of atypical meningiomas. Conclusions: These independent findings suggest that assessment of 1q copy number status can add clinically useful information for the management of patients with atypical meningiomas.

American time use survey: sleep time and its relationship to waking activities.

Science.gov (United States)

Basner, Mathias; Fomberstein, Kenneth M; Razavi, Farid M; Banks, Siobhan; William, Jeffrey H; Rosa, Roger R; Dinges, David F

2007-09-01

To gain some insight into how various behavioral (lifestyle) factors influence sleep duration, by investigation of the relationship of sleep time to waking activities using the American Time Use Survey (ATUS). Cross-sectional data from ATUS, an annual telephone survey of a population sample of US citizens who are interviewed regarding how they spent their time during a 24-hour period between 04:00 on the previous day and 04:00 on the interview day. Data were pooled from the 2003, 2004, and 2005 ATUS databases involving N=47,731 respondents older than 14 years of age. N/A. Adjusted multiple linear regression models showed that the largest reciprocal relationship to sleep was found for work time, followed by travel time, which included commute time. Only shorter than average sleepers (socializing, relaxing, and engaging in leisure activities, while both short ( or =8.5 h) watched more TV than the average sleeper. The extent to which sleep time was exchanged for waking activities was also shown to depend on age and gender. Sleep time was minimal while work time was maximal in the age group 45-54 yr, and sleep time increased both with lower and higher age. Work time, travel time, and time for socializing, relaxing, and leisure are the primary activities reciprocally related to sleep time among Americans. These activities may be confounding the frequently observed association between short and long sleep on one hand and morbidity and mortality on the other hand and should be controlled for in future studies.

Detector dead-time effects and paralyzability in high-speed quantum key distribution

International Nuclear Information System (INIS)

Rogers, Daniel J; Bienfang, Joshua C; Nakassis, Anastase; Xu Hai; Clark, Charles W

2007-01-01

Recent advances in quantum key distribution (QKD) have given rise to systems that operate at transmission periods significantly shorter than the dead times of their component single-photon detectors. As systems continue to increase in transmission rate, security concerns associated with detector dead times can limit the production rate of sifted bits. We present a model of high-speed QKD in this limit that identifies an optimum transmission rate for a system with given link loss and detector response characteristics

Structured syncope care pathways based on lean six sigma methodology optimises resource use with shorter time to diagnosis and increased diagnostic yield.

Science.gov (United States)

Martens, Leon; Goode, Grahame; Wold, Johan F H; Beck, Lionel; Martin, Georgina; Perings, Christian; Stolt, Pelle; Baggerman, Lucas

2014-01-01

To conduct a pilot study on the potential to optimise care pathways in syncope/Transient Loss of Consciousness management by using Lean Six Sigma methodology while maintaining compliance with ESC and/or NICE guidelines. Five hospitals in four European countries took part. The Lean Six Sigma methodology consisted of 3 phases: 1) Assessment phase, in which baseline performance was mapped in each centre, processes were evaluated and a new operational model was developed with an improvement plan that included best practices and change management; 2) Improvement phase, in which optimisation pathways and standardised best practice tools and forms were developed and implemented. Staff were trained on new processes and change-management support provided; 3) Sustaining phase, which included support, refinement of tools and metrics. The impact of the implementation of new pathways was evaluated on number of tests performed, diagnostic yield, time to diagnosis and compliance with guidelines. One hospital with focus on geriatric populations was analysed separately from the other four. With the new pathways, there was a 59% reduction in the average time to diagnosis (p = 0.048) and a 75% increase in diagnostic yield (p = 0.007). There was a marked reduction in repetitions of diagnostic tests and improved prioritisation of indicated tests. Applying a structured Lean Six Sigma based methodology to pathways for syncope management has the potential to improve time to diagnosis and diagnostic yield.

Structured syncope care pathways based on lean six sigma methodology optimises resource use with shorter time to diagnosis and increased diagnostic yield.

Directory of Open Access Journals (Sweden)

Leon Martens

Full Text Available To conduct a pilot study on the potential to optimise care pathways in syncope/Transient Loss of Consciousness management by using Lean Six Sigma methodology while maintaining compliance with ESC and/or NICE guidelines.Five hospitals in four European countries took part. The Lean Six Sigma methodology consisted of 3 phases: 1 Assessment phase, in which baseline performance was mapped in each centre, processes were evaluated and a new operational model was developed with an improvement plan that included best practices and change management; 2 Improvement phase, in which optimisation pathways and standardised best practice tools and forms were developed and implemented. Staff were trained on new processes and change-management support provided; 3 Sustaining phase, which included support, refinement of tools and metrics. The impact of the implementation of new pathways was evaluated on number of tests performed, diagnostic yield, time to diagnosis and compliance with guidelines. One hospital with focus on geriatric populations was analysed separately from the other four.With the new pathways, there was a 59% reduction in the average time to diagnosis (p = 0.048 and a 75% increase in diagnostic yield (p = 0.007. There was a marked reduction in repetitions of diagnostic tests and improved prioritisation of indicated tests.Applying a structured Lean Six Sigma based methodology to pathways for syncope management has the potential to improve time to diagnosis and diagnostic yield.

Universal short-time motion of a polymer in a random environment: Analytical calculations, a blob picture, and Monte Carlo results

NARCIS (Netherlands)

Ebert, U.; Baumgärtner, A.; Schäfer, L.

1996-01-01

Using a recently established renormalization group approach [U. Ebert, J. Stat. Phys. (to be published)], we analyze the center-of-mass motion of a polymer in a Gaussian disordered potential. While in the long-time limit normal diffusion is found, we concentrate here on shorter times. We discuss the

Comparison of the tritium residence times of various ceramic breeder materials irradiated in EXOTIC experiments 4 and 5

International Nuclear Information System (INIS)

Kwast, H.; Elen, J.D.; Conrad, R.; Casadio, S.; Werle, H.; Verstappen, G.

1990-09-01

Tritium residence times have been determined for various ceramic tritium breeding materials from in-situ release measurements. The irradiations, codenamed EXOTIC (EXtraction Of Tritium In Ceramics), were carried out in the High Flux Reactor (HFR) Petten. During the irradiation more than 450 transients were performed and the corresponding tritium release measured. Materials supplied by SCK/CEN (Li 2 ZrO 3 ), CEA (Li 2 ZrO 3 and LiAlO 2 ), ENEA (LiAlO 2 ), KfK (Li 4 SiO 4 ), NRL (Li 6 Zr 2 O 7 ) and ECN (Li 8 ZrO 6 ) were irradiated in EXOTIC-5 to compare the tritium residence times obtained under equal conditions. Apart from differences in density, grain size, pore size and OPV it appeared that the tritium residence times of the lithium zirconates (pellets) were shorter than those of the Li 4 SiO 4 pebbles. The tritium residence times of the Li 4 SiO 4 pebbles were shorter than those of the LiAlO 2 pellets. (author). 7 refs.; 5 figs.; 3 tabs

Pre-hospital transport times and survival for Hypotensive patients with penetrating thoracic trauma

Directory of Open Access Journals (Sweden)

Mamta Swaroop

2013-01-01

Full Text Available Background: Achieving definitive care within the "Golden Hour" by minimizing response times is a consistent goal of regional trauma systems . This study hypothesizes that in urban Level I Trauma Centers, shorter pre-hospital times would predict outcomes in penetrating thoracic injuries. Materials and Methods: A retrospective cohort study was performed using a statewide trauma registry for the years 1999-2003 . Total pre-hospital times were measured for urban victims of penetrating thoracic trauma. Crude and adjusted mortality rates were compared by pre-hospital time using STATA statistical software. Results: During the study period, 908 patients presented to the hospital after penetrating thoracic trauma, with 79% surviving . Patients with higher injury severity scores (ISS were transported more quickly. Injury severity scores (ISS ≥16 and emergency department (ED hypotension (systolic blood pressure, SBP <90 strongly predicted mortality (P < 0.05 for each . In a logistic regression model including age, race, and ISS, longer transport times for hypotensive patients were associated with higher mortality rates (all P values <0.05. This was seen most significantly when comparing patient transport times 0-15 min and 46-60 min (P < 0.001. Conclusion: In victims of penetrating thoracic trauma, more severely injured patients arrive at urban trauma centers sooner . Mortality is strongly predicted by injury severity, although shorter pre-hospital times are associated with improved survival . These results suggest that careful planning to optimize transport time-encompassing hospital capacity and existing resources, traffic patterns, and trauma incident densities may be beneficial in areas with a high burden of penetrating trauma.

The spreading time in SIS epidemics on networks

Science.gov (United States)

He, Zhidong; Van Mieghem, Piet

2018-03-01

In a Susceptible-Infected-Susceptible (SIS) process, we investigate the spreading time Tm, which is the time when the number of infected nodes in the metastable state is first reached, starting from the outbreak of the epidemics. We observe that the spreading time Tm resembles a lognormal-like distribution, though with different deep tails, both for the Markovian and the non-Markovian infection process, which implies that the spreading time can be very long with a relatively high probability. In addition, we show that a stronger virus, with a higher effective infection rate τ or an earlier timing of the infection attempts, does not always lead to a shorter average spreading time E [Tm ] . We numerically demonstrate that the average spreading time E [Tm ] in the complete graph and the star graph scales logarithmically as a function of the network size N for a fixed fraction of infected nodes in the metastable state.

3D Vision Provides Shorter Operative Time and More Accurate Intraoperative Surgical Performance in Laparoscopic Hiatal Hernia Repair Compared With 2D Vision.

Science.gov (United States)

Leon, Piera; Rivellini, Roberta; Giudici, Fabiola; Sciuto, Antonio; Pirozzi, Felice; Corcione, Francesco

2017-04-01

The aim of this study is to evaluate if 3-dimensional high-definition (3D) vision in laparoscopy can prompt advantages over conventional 2D high-definition vision in hiatal hernia (HH) repair. Between September 2012 and September 2015, we randomized 36 patients affected by symptomatic HH to undergo surgery; 17 patients underwent 2D laparoscopic HH repair, whereas 19 patients underwent the same operation in 3D vision. No conversion to open surgery occurred. Overall operative time was significantly reduced in the 3D laparoscopic group compared with the 2D one (69.9 vs 90.1 minutes, P = .006). Operative time to perform laparoscopic crura closure did not differ significantly between the 2 groups. We observed a tendency to a faster crura closure in the 3D group in the subgroup of patients with mesh positioning (7.5 vs 8.9 minutes, P = .09). Nissen fundoplication was faster in the 3D group without mesh positioning ( P = .07). 3D vision in laparoscopic HH repair helps surgeon's visualization and seems to lead to operative time reduction. Advantages can result from the enhanced spatial perception of narrow spaces. Less operative time and more accurate surgery translate to benefit for patients and cost savings, compensating the high costs of the 3D technology. However, more data from larger series are needed to firmly assess the advantages of 3D over 2D vision in laparoscopic HH repair.

Preparation of collagen peptide functionalized chitosan nanoparticles by ionic gelation method: An effective carrier system for encapsulation and release of doxorubicin for cancer drug delivery

Energy Technology Data Exchange (ETDEWEB)

Anandhakumar, S., E-mail: rsanandhakumar@gmail.com [SRM Research Institute, SRM University, Kattankulathur, Chennai 603203 (India); Krishnamoorthy, G.; Ramkumar, K.M. [SRM Research Institute, SRM University, Kattankulathur, Chennai 603203 (India); Raichur, A.M. [Department of Materials Engineering, Indian Institute of Science, Bangalore 560012 (India)

2017-01-01

In recent years, nanoparticles (NPs) based on biopolymers or peptides are gaining popularity for the encapsulation and release of drug molecules, especially for cancer therapy, due to their ability for targeted and controlled release. The use of collagen peptide (CP) for the preparation of chitosan (CN) NPs is especially interesting as it results in NPs that are stable under physiological conditions. In this work, mono-dispersed pH responsive CPCN NPs of about 100 nm were prepared via ionic gelation method by simple and mild co-precipitation of CN and CP. Investigation of NPs with Fourier transform infra-red (FTIR) spectroscopy and dynamic light scattering (DLS) measurements reveals that hydrogen bonding and electrostatic interactions are believed to be major driving forces for NP formation and drug encapsulation, respectively. Scanning electron microscopic (SEM) investigations show that hard and fine CPCN NPs transform to soft and bigger gel like particles as a function of collagen concentration. The unique “polymeric gel” structure of NPs showed high encapsulation efficiency towards doxorubicin hydrochloride (DOX) as well as pH controlled release. Anti-proliferative and cell viability analysis revealed that DOX loaded NPs showed excellent anti-proliferative characteristics against HeLa cells with favorable biocompatibility against normal cells. Such NPs have high potential for use as smart drug delivery carriers in advanced cancer therapy. - Highlights: • Preparation of collagen peptide functionalized chitosan nanoparticles • Hydrogen bonding plays a key role in particle formation. • Electrostatic interaction plays a key role in drug encapsulation. • Functionalized chitosan particles are more stable than chitosan NPs.

Effects of preparation time and trial type probability on performance of anti- and pro-saccades.

Science.gov (United States)

Pierce, Jordan E; McDowell, Jennifer E

2016-02-01

Cognitive control optimizes responses to relevant task conditions by balancing bottom-up stimulus processing with top-down goal pursuit. It can be investigated using the ocular motor system by contrasting basic prosaccades (look toward a stimulus) with complex antisaccades (look away from a stimulus). Furthermore, the amount of time allotted between trials, the need to switch task sets, and the time allowed to prepare for an upcoming saccade all impact performance. In this study the relative probabilities of anti- and pro-saccades were manipulated across five blocks of interleaved trials, while the inter-trial interval and trial type cue duration were varied across subjects. Results indicated that inter-trial interval had no significant effect on error rates or reaction times (RTs), while a shorter trial type cue led to more antisaccade errors and faster overall RTs. Responses following a shorter cue duration also showed a stronger effect of trial type probability, with more antisaccade errors in blocks with a low antisaccade probability and slower RTs for each saccade task when its trial type was unlikely. A longer cue duration yielded fewer errors and slower RTs, with a larger switch cost for errors compared to a short cue duration. Findings demonstrated that when the trial type cue duration was shorter, visual motor responsiveness was faster and subjects relied upon the implicit trial probability context to improve performance. When the cue duration was longer, increased fixation-related activity may have delayed saccade motor preparation and slowed responses, guiding subjects to respond in a controlled manner regardless of trial type probability. Copyright © 2016 Elsevier B.V. All rights reserved.

Organogel polymers from 10-undecenoic acid and poly(vinyl acetate)

Science.gov (United States)

Organogels are used in a variety of high value applications including the removal of toxic solvents from aqueous environments and the time-controlled release of compounds. One of the most promising gelators is a polyvinyl polymer containing medium chain length carboxylic acids. The existing producti...

Measurement of gastric emptying time in various positions using sup(99m)Tc-DTPA

Energy Technology Data Exchange (ETDEWEB)

Shibatsuji, H; Hamada, S; Takahashi, H; Ohishi, H; Hachiya, T [Nara Medical Univ., Kashihara (Japan)

1976-04-01

Gastric emptying with the patients in various positions was evaluated in a group of 8 volunteers by means of serial recordings of gastric radioactivity after administration of a test meal labelled with sup(99m)Tc-DTPA. Gastric emptying time was measured in the supine, prone and sitting position, and the time, which differed according to the position, was expressed as a half life (T1/2) of meal in the stomach. Emptying time was shorter in the prone position and longer in the supine position.

Repose time and cumulative moment magnitude: A new tool for forecasting eruptions?

Science.gov (United States)

Thelen, W. A.; Malone, S. D.; West, M. E.

2010-09-01

During earthquake swarms on active volcanoes, one of the primary challenges facing scientists is determining the likelihood of an eruption. Here we present the relation between repose time and the cumulative moment magnitude (CMM) as a tool to aid in differentiating between an eruption and a period of unrest. In several case studies, the CMM is lower at shorter repose times than it is at longer repose times. The relationship between repose time and CMM may be linear in log-log space, particularly at Mount St. Helens. We suggest that the volume and competence of the plug within the conduit drives the strength of the precursory CMM.

Effect of portal access system and surgery type on surgery times during laparoscopic ovariectomy and salpingectomy in captive African lions and cheetahs.

Science.gov (United States)

Hartman, Marthinus Jacobus; Monnet, Eric; Kirberger, Robert Murco; Schoeman, Johan Petrus

2016-03-02

A prospective randomized study was used to compare surgery times for laparoscopic ovariectomy and salpingectomy in female African lion (Panthera leo) (n = 14) and cheetah (Acinonyx jubatus) (n = 20) and to compare the use of a multiple portal access system (MPAS) and single portal access system (SPAS) between groups. Two different portal techniques were used, namely MPAS (three separate ports) in lions and SPAS (SILS™ port) in cheetahs, using standard straight laparoscopic instruments. Portal access system and first ovary was not randomized. Five different surgery times were compared for the two different procedures as well as evaluating the use and application of MPAS and SPAS. Carbon dioxide volumes for lions were recorded. In adult lionesses operative time (OPT) (P = 0.016) and total surgical time (TST) (P = 0.032) were significantly shorter for salpingectomy compared to ovariectomy. Similarly in cheetahs OPT (P = 0.001) and TST (P = 0.005) were also shorter for salpingectomy compared to ovariectomy. In contrast, in lion cubs no difference was found in surgery times for ovariectomy and salpingectomy. Total unilateral procedure time was shorter than the respective bilateral time for both procedures (P = 0.019 and P = 0.001) respectively and unilateral salpingectomy was also faster than unilateral ovariectomy (P = 0.035) in cheetahs. Port placement time, suturing time and TST were significantly shorter for SPAS compared to MPAS (P = 0.008). There was, however, no difference in OPT between SPAS and MPAS. Instrument cluttering with SPAS was found to be negligible. There was no difference in mean volume CO2 required to complete ovariectomy in lions but the correlation between bodyweight and total volume of CO2 in lions was significant (rs = 0.867; P = 0.002). Laparoscopic salpingectomy was faster than ovariectomy in both adult lions and cheetahs. Using SPAS, both unilateral procedures were faster than bilateral procedures in cheetahs

Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures.

Science.gov (United States)

Jin, Yifei; Compaan, Ashley; Bhattacharjee, Tapomoy; Huang, Yong

2016-06-03

Freeform fabrication of soft structures has been of great interest in recent years. In particular, it is viewed as a critical step toward the grand vision of organ printing--the on-demand design and fabrication of three-dimensional (3D) human organ constructs for implantation and regenerative medicine. The objective of this study is to develop a novel granular gel support material-enabled, two-step gelation-based 'printing-then-gelation' approach to fabricate 3D alginate structures using filament extrusion. Specifically, a granular Carbopol microgel bath holds the ungelled alginate structure being extruded, avoiding the instantaneous gelation of each printed layer as well as resultant surface tension-induced nozzle clogging. Since Carbopol microgels react with multivalent cations, which are needed for alginate crosslinking, gelatin is introduced as a sacrificial material to make an alginate and gelatin bioink for extrusion, which gels thermally (step-one gelation) to initially stabilize the printed structure for removal from Carbopol. Then gelatin is melted and diffused away while alginate is ionically crosslinked in a 37 °C calcium chloride bath (step-two gelation), resulting in an alginate structure. The proposed 'printing-then-gelation' approach works for alginate structure fabrication, and it is also applicable for the printing of cellular constructs and other similar homogeneous soft structures using a two-step or even multi-step approach. The main conclusions are: (1) 0.8% (w/v) Carbopol bath with a neutral pH value may be most suitable for soft structure printing; (2) it is most effective to use a 0.9% (w/v) NaCl solution to facilitate the removal of residual Carbopol; and (3) alginate structures fabricated using the proposed approach demonstrate better mechanical properties than those fabricated using the conventional 'gelation-while-printing' approach.

Denosumab and bone metastasis-free survival in men with nonmetastatic castration-resistant prostate cancer: exploratory analyses by baseline prostate-specific antigen doubling time.

Science.gov (United States)

Smith, Matthew R; Saad, Fred; Oudard, Stephane; Shore, Neal; Fizazi, Karim; Sieber, Paul; Tombal, Bertrand; Damiao, Ronaldo; Marx, Gavin; Miller, Kurt; Van Veldhuizen, Peter; Morote, Juan; Ye, Zhishen; Dansey, Roger; Goessl, Carsten

2013-10-20

Denosumab, an anti-RANK ligand monoclonal antibody, significantly increases bone metastasis-free survival (BMFS; hazard ratio [HR], 0.85; P = .028) and delays time to first bone metastasis in men with nonmetastatic castration-resistant prostate cancer (CRPC) and baseline prostate-specific antigen (PSA) ≥ 8.0 ng/mL and/or PSA doubling time (PSADT) ≤ 10.0 months. To identify men at greatest risk for bone metastasis or death, we evaluated relationships between PSA and PSADT with BMFS in the placebo group and the efficacy and safety of denosumab in men with PSADT ≤ 10, ≤ 6, and ≤ 4 months. A total of 1,432 men with nonmetastatic CRPC were randomly assigned 1:1 to monthly subcutaneous denosumab 120 mg or placebo. Enrollment began February 2006; primary analysis cutoff was July 2010, when approximately 660 men were anticipated to have developed bone metastases or died. In the placebo group, shorter BMFS was observed as PSADT decreased below 8 months. In analyses by shorter baseline PSADT, denosumab consistently increased BMFS by a median of 6.0, 7.2, and 7.5 months among men with PSADT ≤ 10 (HR, 0.84; P = .042), ≤ 6 (HR, 0.77; P = .006), and ≤ 4 months (HR, 0.71; P = .004), respectively. Denosumab also consistently increased time to bone metastasis by PSADT subset. No difference in survival was observed between treatment groups for the overall study population or PSADT subsets. Patients with shorter PSADT are at greater risk for bone metastasis or death. Denosumab consistently improves BMFS in men with shorter PSADT and seems to have the greatest treatment effects in men at high risk for progression.

On the possibility of superconducting phase coherence through time barriers

International Nuclear Information System (INIS)

Barone, A.; Kulik, I.O.

1993-01-01

The possibility of the occurrence of weak coupling between the superconducting order parameters in a single superconductor before and after an ultrashot quenching of superconductivity, is analyzed. The time barrier corresponding to such a quenching of the order parameter has to be shorter than, or comparable with, the characteristic 'coherence time' τ ∼ = Δ. Such an effect is somewhat analogous to a Josephson effect in which phase difference is now considered in the time domain rather than in space. A qualitative derivation of the constitutive relation for such a weak time correlation is obtained which gives, by the duality condition, a dependence of the supercharge on the time phase difference. The role of high-T c superconductors in the detection of this coherent transient response appears to be quite relevant. 21 refs., 4 figs

Mathematical analysis of endothelial sibling pair cell-cell interactions using time-lapse cinematography data.

Science.gov (United States)

Brown, L M; Ryan, U S; Absher, M; Olazabal, B M

1982-01-01

The sibling pairs from two different endothelial cell cultures were analysed by time-lapse cinematography. It was shown that wounded and regular (low density seeded) cultures differed in the behaviour patterns of their siblings. The cultures differed most significantly in the minimum interdivision time (IDT) which was 27% lower for the wounded culture. In the wounded culture there was a greater correlation of IDT values between sibling pairs. IDT values recorded both for paired and for unpaired cells were shorter for the wounded than for the regular culture. The mean IDT for unpaired cells was longer than the mean IDT for paired cells in the regular culture. Thus paired cells in the regular culture, had shorter IDTs, but not as short as in the wounded culture. It was significant that in the wounded culture the first generation of siblings were very close (less than 150 microns apart) at division. Overall the behaviour differences between the two cultures resulted in a higher rate of increase in cell numbers, and thus faster repair, of the wounded monolayer.

The prosurvival activity of ascites against TRAIL is associated with a shorter disease-free interval in patients with ovarian cancer

Directory of Open Access Journals (Sweden)

Lane Denis

2010-01-01

associated with shorter disease-free interval. Conclusions The prosurvival activity of ascites against TRAIL is associated with shorter disease-free interval, which may be explained, at least in part, by ascites-induced cisplatin/paclitaxel resistance. Our findings suggest that ascites may contain prosurvival factors that protect against TRAIL and chemotherapy and consequently affect disease progression.

Time-resolved studies

International Nuclear Information System (INIS)

Mills, D.M.

1992-01-01

When new or more powerful probes become available that offer both shorter data-collection times and the opportunity to apply innovative approaches to established techniques, it is natural that investigators consider the feasibility of exploring the kinetics of time-evolving systems. This stimulating area of research not only can lead to insights into the metastable or excited states that a system may populate on its way to a ground state, but can also lead to a better understanding of that final state. Synchrotron radiation, with its unique properties, offers just such a tool to extend X-ray measurements from the static to the time-resolved regime. The most straight-forward application of synchrotron radiation to the study of transient phenomena is directly through the possibility of decreased data-collection times via the enormous increase in flux over that of a laboratory X-ray system. Even further increases in intensity can be obtained through the use of novel X-ray optical devices. Widebandpass monochromators, e.g., that utilize the continuous spectral distribution of synchrotron radiation, can increase flux on the sample several orders of magnitude over conventional X-ray optical systems thereby allowing a further shortening of the data-collection time. Another approach that uses the continuous spectral nature of synchrotron radiation to decrease data-collection times is the open-quote parallel data collectionclose quotes method. Using this technique, intensities as a function of X-ray energy are recorded simultaneously for all energies rather than sequentially recording data at each energy, allowing for a dramatic decrease in the data-collection time

Adenosine diphosphate-decorated chitosan nanoparticles shorten blood clotting times, influencing the structures and varying the mechanical properties of the clots

Directory of Open Access Journals (Sweden)

Chung TW

2014-03-01

Full Text Available Tze-Wen Chung,1,3 Pei-Yi Lin,2 Shoei-Shen Wang,2 Yen-Fung Chen31Department of Biomedical Engineering, National Yang-Ming University, 2Department of Surgery, National Taiwan University Hospital, Taipei, Taiwan, Republic of China; 3Department of Chemical and Materials Engineering, National Yunlin University of Science and Technology, Yunlin, Taiwan, Republic of ChinaAbstract: Chitosan nanoparticles (NPs decorated with adenosine diphosphate (ADP (ANPs or fibrinogen (FNPs were used to fabricate hemostatic NPs that can shorten blood clotting time and prevent severe local hemorrhage. The structure and mechanical properties of the blood clot induced with ANP (clot/ANP or FNP (clot/FNP were also investigated. The NPs, ANPs, and FNPs, which had particle sizes of 245.1±14.0, 251.0±9.8, and 326.5±14.5 nm and zeta potentials of 24.1±0.5, 20.6±1.9, and 15.3±1.5 mV (n=4, respectively, were fabricated by ionic gelation and then decorated with ADP and fibrinogen. The zeta potentials and Fourier transform infrared (FTIR spectroscopy of the NPs confirmed that their surfaces were successfully coated with ADP and fibrinogen. The scanning electron microscope (SEM micrographs of the structure of the clot induced with "undecorated" chitosan NPs (clot/NP, clot/ANP, and clot/FNP (at 0.05 wt% were different, after citrated bloods had been recalcified by a calcium chloride solution containing NPs, ANPs, or FNPs. This indicated that many NPs adhered on the membrane surfaces of red blood cells, that ANPs induced many platelet aggregates, and that FNPs were incorporated into the fibrin network in the clots. Measurements of the blood clotting times (Tc of blood clot/NPs, clot/ANPs, and clot/FNPs, based on 90% of ultimate frequency shifts measured on a quartz crystal microbalance (QCM, were significantly (P<0.05 (n=4 shorter than that of a clot induced by a phosphate-buffered solution (PBS (clot/PBS (63.6%±3.1%, 48.3%±6.2%, and 63.2%±4.7%, respectively. The ∆F2

Rapid heating of Alaska pollock and chicken breast myofibrillar protein gels as affecting water-holding properties.

Science.gov (United States)

Stevenson, Clinton D; Liu, Wenjie; Lanier, Tyre C

2012-10-10

The gelation response of salted muscle minces to rapid versus slow heating rates is thought to differ between homeotherm and poikilotherm species. This study investigated water-holding (WH) properties of pastes prepared from refined myofibrils, at equal pH, of chicken breast versus Alaska pollock both during [cook loss (CL)] and following [expressible water (EW)] their cooking by rapid [microwave (MW)] versus slow [water bath (WB)] heating and whether such properties were related to gel matrix structure parameters and water mobility. Results did not confirm the industrial experience that pastes of meat from homeotherms benefit from slower cooking. Gels of equally high WH ability (low CL or EW) were made by rapid heating when the holding time did not exceed 5 min prior to cooling, which was sufficient for completion of gelation. Reduced CL and EW correlated with larger and smaller amplitudes of T21 and T22 water pools, respectively, measured by time-domain nuclear magnetic resonance (TD-NMR).

Whey protein isolate modified by transglutaminase aggregation and emulsion gel properties

Science.gov (United States)

Qi, Weiwei; Chen, Chong; Liu, Mujun; Yu, Guoping; Cai, Xinghang; Guo, Peipei; Yao, Yuxiu; Mei, Sijie

2015-07-01

Whey protein isolate and commercial soybean salad oil were used to produce the WPI emulsion dispersions. The properties of TG-catalyzed emulsion gelation produced from WPI emulsion dispersions were investigated by the amount of TG, temperature, pH and reaction time. Specifically, the texture properties (hardness and springiness), water-holding capacity and rheological properties (G' and G") were assessed. The result of Orthogonal tests showed WPI emulsion can form better hardness and springiness gel when the ratio of TG and WPI was 20U/g, pH 7.5, treatment temperature and time were 50°C and 3 h, respectively. The microstructure of TG emulsion gels was more compact, gel pore is smaller, distribution more uniform, the oil droplets size smaller compared with untreated emulsion gels. Compared to the control of rheological properties, G' and G" were significantly increased and G' > G", results showed that the gel was solid state, and TG speeded up the process of gelation.

Time step length versus efficiency of Monte Carlo burnup calculations

International Nuclear Information System (INIS)

Dufek, Jan; Valtavirta, Ville

2014-01-01

Highlights: • Time step length largely affects efficiency of MC burnup calculations. • Efficiency of MC burnup calculations improves with decreasing time step length. • Results were obtained from SIE-based Monte Carlo burnup calculations. - Abstract: We demonstrate that efficiency of Monte Carlo burnup calculations can be largely affected by the selected time step length. This study employs the stochastic implicit Euler based coupling scheme for Monte Carlo burnup calculations that performs a number of inner iteration steps within each time step. In a series of calculations, we vary the time step length and the number of inner iteration steps; the results suggest that Monte Carlo burnup calculations get more efficient as the time step length is reduced. More time steps must be simulated as they get shorter; however, this is more than compensated by the decrease in computing cost per time step needed for achieving a certain accuracy

Time-to-reperfusion in STEMI undergoing interhospital transfer using smartphone and WhatsApp messenger.

Science.gov (United States)

Astarcioglu, Mehmet Ali; Sen, Taner; Kilit, Celal; Durmus, Halil Ibrahim; Gozubuyuk, Gokhan; Kalcik, Macit; Karakoyun, Suleyman; Yesin, Mahmut; Zencirkiran Agus, Hicaz; Amasyali, Basri

2015-10-01

The objective of this study is to assess the efficacy of WhatsApp application as a communication method among the emergency physician (EP) in a rural hospital without percutaneous coronary intervention (PCI) capability and the interventional cardiologist at a tertiary PCI center. Current guidelines recommend that patients with ST-segment elevation myocardial infarction (STEMI) receive primary PCI within 90 minutes. This door-to-balloon (D2B) time has been difficult to achieve in rural STEMI. We evaluated 108 patients with STEMI in a rural hospital with emergency department but without PCI capability to determine the impact of WhatsApp triage and activation of the cardiac catheterization laboratory on D2B time. The images were obtained from cases of suspected STEMI using the smartphones by the EP and were sent to the interventional cardiologist via the WhatsApp application (group 1, n=53). The control group included concurrently treated patients with STEMI during the same period but not receiving triage (group 2, n=55). The D2B time was significantly shorter in the intervention group (109±31 vs 130±46 minutes, PWhatsApp triage with activation of the cardiac catheterization laboratory was associated with shorter D2B time and results in a greater proportion of patients achieving guideline recommendations. The method is cheap, quick, and easy to operate. Copyright © 2015 Elsevier Inc. All rights reserved.

Spin and time-resolved magnetic resonance in radiation chemistry. Recent developments and perspectives

International Nuclear Information System (INIS)

Shkrob, I.A.; Trifunac, A.D.

1997-01-01

Time-resolved pulsed EPR and ODMR in studies on early events in radiation chemistry are examined. It is concluded that these techniques yield valuable and diverse information about chemical reactions in spurs, despite the fact that the spur reactions occur on a time scale that is much shorter than the time resolution of these methods. Several recent examples include EPR of H/D atoms in vitreous silica and cryogenic liquids and ODMR of doped alkane solids and amorphous semiconductors. It is argued that a wider use of time-resolved magnetic resonance methods would benefit the studies on radiation chemistry of disordered solids, simple liquids, and polymers. (author)

Integrated response and transit time distributions of watersheds by combining hydrograph separation and long-term transit time modeling

Directory of Open Access Journals (Sweden)

M. C. Roa-García

2010-08-01

Full Text Available We present a new modeling approach analyzing and predicting the Transit Time Distribution (TTD and the Response Time Distribution (RTD from hourly to annual time scales as two distinct hydrological processes. The model integrates Isotope Hydrograph Separation (IHS and the Instantaneous Unit Hydrograph (IUH approach as a tool to provide a more realistic description of transit and response time of water in catchments. Individual event simulations and parameterizations were combined with long-term baseflow simulation and parameterizations; this provides a comprehensive picture of the catchment response for a long time span for the hydraulic and isotopic processes. The proposed method was tested in three Andean headwater catchments to compare the effects of land use on hydrological response and solute transport. Results show that the characteristics of events and antecedent conditions have a significant influence on TTD and RTD, but in general the RTD of the grassland dominated catchment is concentrated in the shorter time spans and has a higher cumulative TTD, while the forest dominated catchment has a relatively higher response distribution and lower cumulative TTD. The catchment where wetlands concentrate shows a flashier response, but wetlands also appear to prolong transit time.

The influence of single neuron dynamics and network topology on time delay-induced multiple synchronous behaviors in inhibitory coupled network

International Nuclear Information System (INIS)

Zhao, Zhiguo; Gu, Huaguang

2015-01-01

Highlights: • Time delay-induced multiple synchronous behaviors was simulated in neuronal networks. • Multiple behaviors appear at time delays shorter than a bursting period of neurons. • The more spikes per burst of bursting, the more synchronous regions of time delay. • From regular to random via small-world networks, synchronous degree becomes weak. • An interpretation of the multiple behaviors and the influence of network are provided. - Abstract: Time delay induced-multiple synchronous behaviors are simulated in neuronal network composed of many inhibitory neurons and appear at different time delays shorter than a period of endogenous bursting of individual neurons. It is different from previous investigations wherein only one of multiple synchronous behaviors appears at time delay shorter than a period of endogenous firing and others appear at time delay longer than the period duration. The bursting patterns of the synchronous behaviors are identified based on the dynamics of an individual neuron stimulated by a signal similar to the inhibitory coupling current, which is applied at the decaying branch of a spike and suitable phase within the quiescent state of the endogenous bursting. If a burst of endogenous bursting contains more spikes, the synchronous behaviors appear at more regions of time delay. As the coupling strength increases, the multiple synchronous behaviors appear in a sequence because the different threshold of coupling current or strength is needed to achieve synchronous behaviors. From regular, to small-world, and to random networks, synchronous degree of the multiple synchronous behaviors becomes weak, and synchronous bursting patterns with lower spikes per burst disappear, which is properly interpreted by the difference of coupling current between neurons induced by different degree and the high threshold of coupling current to achieve synchronization for the absent synchronous bursting patterns. The results of the influence of

Fused deposition modelling of sodium caseinate dispersions

NARCIS (Netherlands)

Schutyser, M.A.I.; Houlder, S.; Wit, de Martin; Buijsse, C.A.P.; Alting, A.C.

2018-01-01

Only recently, researchers have started experimenting with 3D printing of foods. The aim of this study was to investigate 3D printed objects from sodium caseinate dispersions, exhibiting reversible gelation behaviour. Gelation and dispensing behaviour were explored and structures of different

Preparation and in vitro evaluation of amoxicillin encapsulated in ...

African Journals Online (AJOL)

Methods: Eighteen batches of various ratios of chitosan, sodium alginate and calcium chloride were ... emulsion, ionotropic gelation or reverse micellar methods. The method used here is ionotropic gelation method ... washed twice with distilled water and used for ..... Characterization of insulin-loaded alginate nanoparticles.

Legal Status, Time in the USA, and the Well-Being of Latinos in Los Angeles.

Science.gov (United States)

Young, Maria-Elena De Trinidad; Pebley, Anne R

2017-12-01

In the USA, undocumented Latino immigrants may have poorer health because of barriers to health care, stressors, and detrimental effects of immigration enforcement. Previous immigrant health research, however, suggests that recently arrived Latino immigrants have better health than US-born Latinos and their health deteriorates over time. Given the current environments that undocumented immigrants face, legal status is a structural factor that likely influences the patterns of immigrant health. Therefore, the aim of this study was to examine the extent to which physical and mental health differed by legal status and duration in the USA for the Latino population in Los Angeles County, California. We conducted analysis of Latino respondents (n = 1396) to the Los Angeles Family and Neighborhood Survey (L.A.FANS) Wave II. We examined self-reported health, depression measured by the Composite International Diagnostic Interview-Short Form, and blood pressure collected by trained interviewers. Respondents reported their legal status, time in the USA, and other sociodemographic characteristics. Regression models were used to test associations between each outcome and 1) legal status and 2) legal status by duration (≤ 15 and > 15 years) in the USA. Without taking duration into account, we found no significant differences in outcomes between undocumented, documented, or US-born Latinos. Taking duration into account, shorter duration undocumented immigrants had worse self-reported health than the US born. Undocumented immigrants, regardless of duration, had higher blood pressure than documented immigrants who had been in the USA for less time and the same level of blood pressure as the US born. In contrast, shorter duration documented immigrants had lower blood pressure compared to longer duration documented immigrants and US-born counterparts, and marginally lower blood pressure than shorter duration undocumented immigrants. The findings suggest that the "health

Time between plastic displacements of elasto-plastic oscillators subject to Gaussian white noise

DEFF Research Database (Denmark)

Tarp-Johansen, Niels Jacob; Ditlevsen, Ove Dalager

2001-01-01

A one degree of freedom elasto-plastic oscillator subject to stationary Gaussian white noise has a plastic displacement response process of intermittent character. During shorter or longer time intervals the oscillator vibrates within the elastic domain without undergoing any plastic displacements...... between the clumps of plastic displacements. This is needed for a complete description of the plastic displacement process. A quite accurate fast simulation procedure is presented based on an amplitude model to determine the short waiting times in the transient regime of the elastic vibrations existing...

TIME HORIZON AND UNCOVERED INTEREST PARITY IN EMERGING ECONOMIES

Directory of Open Access Journals (Sweden)

Norlida Hanim Mohd Salleh

2011-07-01

Full Text Available The aim of this study is to re-examine the well-known empirical puzzle of uncovered interest parity (UIP for emerging market economies with different prediction time horizons. The empirical results obtained using dynamic panel and time series techniques for monthly data from January 1995 to December 2009 eventually show that the panel data estimates are more powerful than those obtained by applying individual time series estimations and the significant contribution of the exchange rate prediction horizons in determining the status of UIP. This finding reveals that at the longer time horizon, the model has better econometric specification and thus more predictive power for exchange rate movements compared to the shorter time period. The findings can also be a signalling of well-integrated currency markets and a reliable guide to international investors as well as for the orderly conduct of monetary authorities.

Effect of Ankle Joint Contact Angle and Ground Contact Time on Depth Jump Performance.

Science.gov (United States)

Phillips, Joshua H; Flanagan, Sean P

2015-11-01

Athletes often need to both jump high and get off the ground quickly, but getting off the ground quickly can decrease the vertical ground reaction force (VGRF) impulse, impeding jump height. Energy stored in the muscle-tendon complex during the stretch-shortening cycle (SSC) may mitigate the effects of short ground contact times (GCTs). To take advantage of the SSC, several coaches recommend "attacking" the ground with the foot in a dorsiflexed (DF) position at contact. However, the efficacy of this technique has not been tested. This investigation tested the hypotheses that shorter GCTs would lead to smaller vertical depth jump heights (VDJH), and that this difference could be mitigated by instructing the athletes to land in a DF as opposed to a plantar flexed (PF) foot position. Eighteen healthy junior college athletes performed depth jumps from a 45-cm box onto force platforms under instruction to achieve one of the 2 objectives (maximum jump height [hmax] or minimal GCT [tmin]), with one of the 2 foot conditions (DF or PF). These variations created 4 distinct jump conditions: DF-hmax, DF-tmin, PF-hmax, and PF-tmin. For all variables examined, there were no significant interactions. For all 4 conditions, the ankle was PF during landing, but the DF condition was 28.87% less PF than the PF condition. The tmin conditions had a 23.48% shorter GCT than hmax. There were no significant main effects for jump height. The peak impact force for tmin was 22.14% greater than hmax and 19.11% greater for DF compared with PF conditions. A shorter GCT did not necessitate a smaller jump height, and a less PF foot did not lead to improvements in jump height or contact time during a depth jump from a 45-cm box. The same jump height was attained in less PF and shorter GCT conditions by larger impact forces. To decrease contact time while maintaining jump height, athletes should be instructed to "get off the ground as fast as possible." This cue seems to be more important than foot

Time to Detection with BacT/Alert FA Plus Compared to BacT/Alert FA Blood Culture Media.

Science.gov (United States)

Nutman, A; Fisher Even-Tsur, S; Shapiro, G; Braun, T; Schwartz, D; Carmeli, Y

2016-09-01

Rapid identification of the causative pathogen in patients with bacteremia allows adjustment of antibiotic therapy and improves patient outcomes. We compared in vitro and real-life time to detection (TTD) of two blood culture media, BacT/Alert FA (FA) and BacT/Alert FA Plus (FA Plus), for the nine most common species of bacterial pathogens recovered from blood samples. Experimental data from simulated cultures was compared with microbiology records of TTD for both culture media with growth of the species of interest in clinical blood cultures. In the experimental conditions, median TTD was 3.8 hours (23.9 %) shorter using FA Plus media. The magnitude of reduction differed between species. Similarly, in real life data, FA Plus had shorter TTD than FA media; however, the difference between culture media was smaller, and median TTD was only 1 hour (8.5 %) less. We found shorter TTD with BacT/Alert FA Plus culture media, both experimentally and in real-life conditions and unrelated to antibiotic neutralization, highlighting the importance of appropriate blood culture media selection.

Bovine chromosomal regions affecting rheological traits in rennet-induced skim milk gels

DEFF Research Database (Denmark)

Gregersen, Vivi Raundahl; Gustavsson, F; Glantz, M

2015-01-01

genomic regions affecting traits related to rennet-induced gelation, the aim of this study was to identify potential candidate genes affecting these traits. Hence, rennet-induced gelation, including rennet coagulation time, gel strength, and yield stress, was measured in skim milk samples collected from...... 379 animals of the Swedish Red breed using low-amplitude oscillation measurements. All animals had genotypes for almost 621,000 segregating single nucleotide polymorphisms (SNP), identified using the Bovine HD SNPChip (Illumina Inc., San Diego, CA). The genome was scanned for associations, haplotypes...... based on SNP sets comprising highly associated SNP were inferred, and the effects of the 2 most common haplotypes within each region were analyzed using mixed models. Even though the number of animals was relatively small, a total of 21 regions were identified, with 4 regions showing association...

Induction of a shorter compression phase is correlated with a deeper chest compression during metronome-guided cardiopulmonary resuscitation: a manikin study.

Science.gov (United States)

Chung, Tae Nyoung; Bae, Jinkun; Kim, Eui Chung; Cho, Yun Kyung; You, Je Sung; Choi, Sung Wook; Kim, Ok Jun

2013-07-01

Recent studies have shown that there may be an interaction between duty cycle and other factors related to the quality of chest compression. Duty cycle represents the fraction of compression phase. We aimed to investigate the effect of shorter compression phase on average chest compression depth during metronome-guided cardiopulmonary resuscitation. Senior medical students performed 12 sets of chest compressions following the guiding sounds, with three down-stroke patterns (normal, fast and very fast) and four rates (80, 100, 120 and 140 compressions/min) in random sequence. Repeated-measures analysis of variance was used to compare the average chest compression depth and duty cycle among the trials. The average chest compression depth increased and the duty cycle decreased in a linear fashion as the down-stroke pattern shifted from normal to very fast (pmetronome-guided cardiopulmonary resuscitation.

The effect of masking in the attentional dwell time paradigm

DEFF Research Database (Denmark)

Petersen, Anders

2009-01-01

, 1994). In most studies of attentional dwell time, two masked targets have been used. Moore et al. (1996) have criticised the masking of the first target when measuring the attentional dwell time, finding a shorter attentional dwell time when the first mask was omitted. In the presented work, the effect...... of the first mask is further investigated by including a condition where the first mask is presented without a target. The results from individual subjects show that the findings of Moore et al. can be replicated. The results also suggest that presenting the first mask without a target is enough to produce...... an impairment of the second target. Hence, the attentional dwell time may be a combined effect arising from attending to both the first target and its mask....

Time flies with music whatever its emotional valence.

Science.gov (United States)

Droit-Volet, Sylvie; Bigand, Emmanuel; Ramos, Danilo; Bueno, José Lino Oliveira

2010-10-01

The present study used a temporal bisection task to investigate whether music affects time estimation differently from a matched auditory neutral stimulus, and whether the emotional valence of the musical stimuli (i.e., sad vs. happy music) modulates this effect. The results showed that, compared to sine wave control music, music presented in a major (happy) or a minor (sad) key shifted the bisection function toward the right, thus increasing the bisection point value (point of subjective equality). This indicates that the duration of a melody is judged shorter than that of a non-melodic control stimulus, thus confirming that "time flies" when we listen to music. Nevertheless, sensitivity to time was similar for all the auditory stimuli. Furthermore, the temporal bisection functions did not differ as a function of musical mode. Copyright © 2010 Elsevier B.V. All rights reserved.

Fabrication and physical and biological properties of fibrin gel derived from human plasma

Science.gov (United States)

Zhao, Haiguang; Ma, Lie; Zhou, Jie; Mao, Zhengwei; Gao, Changyou; Shen, Jiacong

2008-03-01

The fast development of tissue engineering and regenerative medicine drives the old biomaterials, for example, fibrin glue, to find new applications in these areas. Aiming at developing a commercially available hydrogel for cell entrapment and delivery, in this study we optimized the fabrication and gelation conditions of fibrin gel. Fibrinogen was isolated from human plasma by a freeze-thaw circle. Gelation of the fibrinogen was accomplished by mixing with thrombin. Absorbance of the fibrinogen/thrombin mixture at 550 nm as a function of reaction time was monitored by UV-VIS spectroscopy. It was found that the clotting time is significantly influenced by the thrombin concentration and the temperature, while less influenced by the fibrinogen concentration. After freeze-drying, the fibrin gel was characterized by scanning electron microscopy (SEM), revealing fibrous microstructure. Thermal gravimetric analysis found that the degradation temperature of the crosslinked fibrin gel starts from 288 °C, which is about 30 °C higher than that of the fibrinogen. The hydrogel has an initial water-uptake ratio of ~50, decreased to 30-40 after incubation in water for 11 h depending on the thrombin concentration. The fibrin gels lost their weights in PBS very rapidly, while slowly in DMEM/fetal bovine serum and DMEM. In vitro cell culture found that human fibroblasts could normally proliferate in the fibrin gel with spreading morphology. In conclusion, the fibrin gel containing higher concentration of fibrinogen (20 mg ml-1) and thrombin (5 U ml-1) has suitable gelation time and handling properties, and thus is applicable as a delivery vehicle for cells such as fibroblasts.

Spontaneous stacking of purple membranes during immobilization with physical cross-linked poly(vinyl alcohol) hydrogel with retaining native-like functionality of bacteriorhodopsin

Science.gov (United States)

Yokoyama, Yasunori; Tanaka, Hikaru; Yano, Shunsuke; Takahashi, Hiroshi; Kikukawa, Takashi; Sonoyama, Masashi; Takenaka, Koshi

2017-05-01

We previously discovered the correlation between light-induced chromophore color change of a photo-receptor membrane protein bacteriorhodopsin (bR) and its two-dimensional crystalline state in the membrane. To apply this phenomenon to a novel optical memory device, it is necessary that bR molecules are immobilized as maintaining their structure and functional properties. In this work, a poly(vinyl alcohol) (PVA) hydrogel with physical cross-linkages (hydrogen bonds between PVA chains) that resulted from repeated freezing-and-thawing (FT) cycles was used as an immobilization medium. To investigate the effects of physically cross-linked PVA gelation on the structure and function of bR in purple membranes (PMs), spectroscopic techniques were employed against PM/PVA immobilized samples prepared with different FT cycle numbers. Visible circular dichroism spectroscopy strongly suggested PM stacking during gelation. X-ray diffraction data also indicated the PM stacking as well as its native-like crystalline lattice even after gelation. Time-resolved absorption spectroscopy showed that bR photocycle behaviors in PM/PVA immobilized samples were almost identical to that in suspension. These results suggested that a physically cross-linked PVA hydrogel is appropriate for immobilizing membrane proteins in terms of maintaining their structure and functionality.

Two-component self-assembly with solvent leading to "wet" and microcrystalline organogel fibers.

Science.gov (United States)

Löfman, Miika; Lahtinen, Manu; Rissanen, Kari; Sievänen, Elina

2015-01-15

The microcrystalline fibers of N-(2-aminoethyl)-3α-hydroxy-5β-cholan-24-amide 1 provided a useful model system for studying the complex relationship between morphology, experimental parameters, solvent, and the phenomenon of organogelation. The presence of solvents in the solid forms of 1 along with crystallization behavior suggested solvate formation and polymorphic behavior. Forty solid state- and xerogel samples of 1 formed in organic solvents and in three categories of experimental conditions were analyzed with single crystal X-ray diffraction (XRD), powder X-ray diffraction (PXRD), Raman microscopy, and attenuated total reflection Fourier-transform infrared spectroscopy (ATR FTIR). Two polymorphs and four isostructural aromatic solvates of 1 were found among some unknown forms in the samples. Single crystal X-ray structures of one polymorph and bromobenzene solvate were obtained, the latter from a xerogel. Multiple crystal forms could be present in a sample, and their contributions to gelation were estimated taking the experimental conditions into account. Gelator 1 could act as a variable component gelator, either alone or in combination with an aromatic solvent. The research brings new insight into the structures of microcrystalline organogel fibers, linking solvate/inclusion crystal formation with microcrystalline fibers of an organogelator for the first time. Copyright © 2014 Elsevier Inc. All rights reserved.

Microcapsules with intrinsic barium radiopacity for immunoprotection and X-ray/CT imaging of pancreatic islet cells.

Science.gov (United States)

Arifin, Dian R; Manek, Sameer; Call, Emma; Arepally, Aravind; Bulte, Jeff W M

2012-06-01

Microencapsulation is a commonly used technique for immunoprotection of engrafted therapeutic cells. We investigated a library of capsule formulations to determine the most optimal formulation for pancreatic beta islet cell transplantation, using barium as the gelating ion and clinical-grade protamine sulfate (PS) as a new cationic capsule cross-linker. Barium-gelated alginate/PS/alginate microcapsules (APSA, diameter = 444 ± 21 μm) proved to be mechanically stronger and supported a higher cell viability as compared to conventional alginate/poly-l-lysine/alginate (APLLA) capsules. Human pancreatic islets encapsulated inside APSA capsules, gelated with 20 mm barium as optimal concentration, exhibited a sustained morphological integrity, viability, and functionality for at least 3-4 weeks in vitro, with secreted human C-peptide levels of 0.2-160 pg/ml/islet. Unlike APLLA capsules that are gelled with calcium, barium-APSA capsules are intrinsically radiopaque and, when engrafted into mice, could be readily imaged in vivo with micro-computed tomography (CT). Without the need of adding contrast agents, these capsules offer a clinically applicable alternative for simultaneous immunoprotection and real-time, non-invasive X-ray/CT monitoring of engrafted cells during and after in vivo administration. Copyright © 2012 Elsevier Ltd. All rights reserved.

The preparation of UO2 ceramic microspheres with an advanced process (TGU)

International Nuclear Information System (INIS)

Xu Zhichang; Tang Yaping; Zhang Fuhong

1994-04-01

The UO 2 ceramic microspheres are the most important materials in the spherical fuel elements for high temperature reactor (HTR). An advanced process for preparation of UO 2 ceramic microspheres has been developed at Institute of Nuclear Energy Technology, Tsinghua University. This process known as total gelation process of uranium (TGU), is based on the traditional sol-gel process, external gelation process and internal gelation process of uranium (EGU and IGU), and has been selected as the production process. The result of batch test is described. Accordance with the requirements of quality control (QC) and quality assurance (QA), the stabilization of operating parameters and product quality is tested., The results on batch test have shown that as well as all of the operated parameters are fixed, then the product quality can be stable as well as the product specification can be met. When the colloidal flow rate and the vibration frequency of nozzle are fixed, the kernel's size is also fixed. When the sintering temperature and time are fixed, the product density is also fixed. When the hydrogen atmosphere is used, the O/U ratio is very near to stoichiometry. The performance and structure of UO 2 ceramic microspheres are also given

Are Shorter Article Titles More Attractive for Citations? Cross-sectional Study of 22 Scientific Journals

Science.gov (United States)

Habibzadeh, Farrokh; Yadollahie, Mahboobeh

2010-01-01

Aim To investigate the correlation between the length of the title of a scientific article and the number of citations it receives, in view of the common editorial call for shorter titles. Methods Title and the number of citations to all articles published in 2005 in 22 arbitrarily chosen English-language journals (n = 9031) were retrieved from citation database Scopus. The 2008 journal impact factors of these 22 journals were also retrieved from Thomson Reuters’ Journal Citation Report (JCR). Assuming the article title length as the independent variable, and the number of citations to the article as the dependent variable, a linear regression model was applied. Results The slope of the regression line for some journals (n = 6, when titles were measured in characters but 7 when titles were measured in words) was negative – none was significantly different from 0. The overall slope for all journals was 0.140 (when titles were measured in characters) and 0.778 (when titles were measured in words), significantly different from 0 (P articles with longer titles received more citations – Spearman ρ = 0.266 – when titles were measured in characters, and ρ = 0.244 when titles were measured in words (P 10 and for 2 out of 14 journals with impact factor <10 (P < 0.001, Fisher exact test). Conclusion Longer titles seem to be associated with higher citation rates. This association is more pronounced for journals with high impact factors. Editors who insist on brief and concise titles should perhaps update the guidelines for authors of their journals and have more flexibility regarding the length of the title. PMID:20401960

Reducing preoperative fasting time: A trend based on evidence.

Science.gov (United States)

de Aguilar-Nascimento, José Eduardo; Dock-Nascimento, Diana Borges

2010-03-27

Preoperative fasting is mandatory before anesthesia to reduce the risk of aspiration. However, the prescribed 6-8 h of fasting is usually prolonged to 12-16 h for various reasons. Prolonged fasting triggers a metabolic response that precipitates gluconeogenesis and increases the organic response to trauma. Various randomized trials and meta-analyses have consistently shown that is safe to reduce the preoperative fasting time with a carbohydrate-rich drink up to 2 h before surgery. Benefits related to this shorter preoperative fasting include the reduction of postoperative gastrointestinal discomfort and insulin resistance. New formulas containing amino acids such as glutamine and other peptides are being studied and are promising candidates to be used to reduce preoperative fasting time.

Temperature and time variations during osteotomies performed with different piezosurgical devices: an in vitro study.

Science.gov (United States)

Delgado-Ruiz, R A; Sacks, D; Palermo, A; Calvo-Guirado, J L; Perez-Albacete, C; Romanos, G E

2016-09-01

The aim of this experimental in vitro study was to evaluate the effects of the piezoelectric device in temperature and time variations in standardized osteotomies performed with similar tip inserts in bovine bone blocks. Two different piezosurgical devices were used the OE-F15(®) (Osada Inc., Los Angeles, California, USA) and the Surgybone(®) (Silfradent Inc., Sofia, Forli Cesena, Italy). Serrated inserts with similar geometry were coupled with each device (ST94 insert/test A and P0700 insert/test B). Osteotomies 10 mm long and 3 mm deep were performed in bone blocks resembling type II (dense) and type IV (soft) bone densities with and without irrigation. Thermal changes and time variations were recorded. The effects of bone density, irrigation, and device on temperature changes and time necessary to accomplish the osteotomies were analyzed. Thermal analysis showed significant higher temperatures during piezosurgery osteotomies in hard bone without irrigation (P  0.05). Time analysis showed that the mean time values necessary to perform osteotomies were shorter in soft bone than in dense bone (P piezosurgery osteotomies in dense bone without irrigation; the time to perform the osteotomy with piezosurgery is shorter in soft bone compared to hard bone; and the piezosurgical device have a minimal influence in the temperature and time variations when a similar tip design is used during piezosurgery osteotomies. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Seasonal change of residence time in spring water and groundwater at a mountainous headwater catchment

Science.gov (United States)

Nagano, Kosuke; Tsujimura, Maki; Onda, Yuichi; Iwagami, Sho; Sakakibara, Koichi; Sato, Yutaro

2017-04-01

Determination of water age in headwater is important to consider water pathway, source and storage in the catchment. Previous studies showed that groundwater residence time changes seasonally. These studies reported that mean residence time of water in dry season tends to be longer than that in rainy season, and it becomes shorter as precipitation and discharge amount increases. However, there are few studies to clarify factors causing seasonal change in mean residence time in spring water and groundwater based on observed data. Therefore, this study aims to reveal the relationship between mean residence time and groundwater flow system using SFconcentration in spring and 10 minutes interval hydrological data such as discharge volume, groundwater level and precipitation amount in a headwater catchment in Fukushima, Japan. The SF6 concentration data in spring water observed from April 2015 to November 2016 shows the mean residence time of springs ranged from zero to 14 years. We also observed a clear negative correlation between discharge rate and residence time in the spring. The residence time in shallow groundwater in rainy season was younger as compared with that in low rainfall period. Therefore, the shallow groundwater with young residence time seems to contribute to the spring in rainy season, causing shorter residence time. Additionally, the residence time of groundwater ranged from 3 to 5 years even in low rainfall period. The residence time in high groundwater table level in ridge was older as compared with that in low groundwater table level. These suggest that the contribution of groundwater with older age in the ridge becomes dominant in the low discharge.

Denosumab and Bone Metastasis–Free Survival in Men With Nonmetastatic Castration-Resistant Prostate Cancer: Exploratory Analyses by Baseline Prostate-Specific Antigen Doubling Time

Science.gov (United States)

Smith, Matthew R.; Saad, Fred; Oudard, Stephane; Shore, Neal; Fizazi, Karim; Sieber, Paul; Tombal, Bertrand; Damiao, Ronaldo; Marx, Gavin; Miller, Kurt; Van Veldhuizen, Peter; Morote, Juan; Ye, Zhishen; Dansey, Roger; Goessl, Carsten

2013-01-01

Purpose Denosumab, an anti–RANK ligand monoclonal antibody, significantly increases bone metastasis–free survival (BMFS; hazard ratio [HR], 0.85; P = .028) and delays time to first bone metastasis in men with nonmetastatic castration-resistant prostate cancer (CRPC) and baseline prostate-specific antigen (PSA) ≥ 8.0 ng/mL and/or PSA doubling time (PSADT) ≤ 10.0 months. To identify men at greatest risk for bone metastasis or death, we evaluated relationships between PSA and PSADT with BMFS in the placebo group and the efficacy and safety of denosumab in men with PSADT ≤ 10, ≤ 6, and ≤ 4 months. Patients and Methods A total of 1,432 men with nonmetastatic CRPC were randomly assigned 1:1 to monthly subcutaneous denosumab 120 mg or placebo. Enrollment began February 2006; primary analysis cutoff was July 2010, when approximately 660 men were anticipated to have developed bone metastases or died. Results In the placebo group, shorter BMFS was observed as PSADT decreased below 8 months. In analyses by shorter baseline PSADT, denosumab consistently increased BMFS by a median of 6.0, 7.2, and 7.5 months among men with PSADT ≤ 10 (HR, 0.84; P = .042), ≤ 6 (HR, 0.77; P = .006), and ≤ 4 months (HR, 0.71; P = .004), respectively. Denosumab also consistently increased time to bone metastasis by PSADT subset. No difference in survival was observed between treatment groups for the overall study population or PSADT subsets. Conclusion Patients with shorter PSADT are at greater risk for bone metastasis or death. Denosumab consistently improves BMFS in men with shorter PSADT and seems to have the greatest treatment effects in men at high risk for progression. PMID:24043751

Statistical study on applied stress dependence of failure time in stress corrosion cracking of Zircaloy-4 alloy

International Nuclear Information System (INIS)

Hirao, Keiichi; Yamane, Toshimi; Minamino, Yoritoshi; Tanaka, Akiei.

1988-01-01

Effects of applied stress on failure time in stress corrosion cracking of Zircaloy-4 alloy were investigated by Weibull distribution method. Test pieces in the evaculated silica tubes were annealed at 1,073 K for 7.2 x 10 3 s, and then quenched into ice-water. These species under constant applied stresses of 40∼90 % yield stress were immersed in CH 3 OH-1 w% I 2 solution at room temperature. The probability distribution of failure times under applied stress of 40 % of yield stress was described as single Weibull distribution, which had one shape parameter. The probability distributions of failure times under applied stress above 60 % of yield stress were described as composite and mixed Weibull distributions, which had the two shape parameters of Weibull distributions for the regions of the shorter time and longer one of failure. The values of these shape parameters in this study were larger than the value of 1 which corresponded to that of wear out failure. The observation of fracture surfaces and the stress dependence of the shape parameters indicated that the shape parameters both for the times of failure under 40 % of yield stress and for the longer ones above 60 % of yield stress corresponded to intergranular cracking, and that for shorter times of failure corresponded to transgranular cracking and dimple fracture. (author)

The microstructure and rheology of homogeneous and phase separated gelatine gels

NARCIS (Netherlands)

Ersch, C.; Linden, E. van der; Venema, P.; Martin, A.

2016-01-01

The gelation of gelatine in mixtures of gelatine (type A or type B) and globular proteins (Whey Protein Isolate (WPI), Whey Protein Aggregates (WPA) and Soy Protein Isolate (SPI)) was studied with a focus on their phase separation during gelation. Confocal laser scanning microscopy, visual

Properties of acid gels made from sodium caseinate-maltodextrin conjugates prepared by a wet heating method.

Science.gov (United States)

Zhang, Shuwen; Gong, Yuansheng; Khanal, Som; Lu, Yanjie; Lucey, John A

2017-11-01

CN dispersion resulted in slightly shorter acid gelation times even without the conjugation reaction. The storage modulus (G') of acid gels was significantly lower in conjugated samples compared with the corresponding (unreacted) mixtures of Md and NaCN. The sample with the lowest G' value at pH 4.6 was the C40 conjugate. Fluorescence microscopy showed that gels made by conjugates had slightly larger pores. These results indicate that conjugation of casein modified its acid gelation properties, presumably by the Md polysaccharide moiety hindering aggregation and rearrangements of the casein network. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Sitting Time, Physical Activity and Sleep by Work Type and Pattern—The Australian Longitudinal Study on Women’s Health

Directory of Open Access Journals (Sweden)

Bronwyn K. Clark

2017-03-01

Full Text Available Data from the Australian Longitudinal Study on Women’s Health were used to examine how work was associated with time spent sleeping, sitting and in physical activity (PA, in working women. Young (31–36 years; 2009 and mid-aged (59–64 years; 2010 women reported sleep (categorised as shorter ≤6 h/day and longer ≥8 h/day and sitting time (work, transport, television, non-work computer, and other; summed for total sitting time on the most recent work and non-work day; and moderate and vigorous PA (categorised as meeting/not meeting guidelines in the previous week. Participants reported occupation (manager/professional; clerical/sales; trades/transport/labourer, work hours (part-time; full-time and work pattern (shift/night; not shift/night. The odds of shorter sleep on work days was higher in both cohorts for women who worked shift or night hours. Longer sitting time on work days, made up primarily of sitting for work, was found for managers/professionals, clerical/sales and full-time workers. In the young cohort, clerical/sales workers and in the mid-aged cohort, full-time workers were less likely to meet PA guidelines. These results suggest multiple behaviour interventions tailored to work patterns and occupational category may be useful to improve the sleep, sitting and activity of working women.

Assessing the Financial Benefits of Faster Development Times: The Case of Single-source Versus Multi-vendor Outsourced Biopharmaceutical Manufacturing.

Science.gov (United States)

DiMasi, Joseph A; Smith, Zachary; Getz, Kenneth A

2018-05-10

The extent to which new drug developers can benefit financially from shorter development times has implications for development efficiency and innovation incentives. We provided a real-world example of such gains by using recent estimates of drug development costs and returns. Time and fee data were obtained on 5 single-source manufacturing projects. Time and fees were modeled for these projects as if the drug substance and drug product processes had been contracted separately from 2 vendors. The multi-vendor model was taken as the base case, and financial impacts from single-source contracting were determined relative to the base case. The mean and median after-tax financial benefits of shorter development times from single-source contracting were $44.7 million and $34.9 million, respectively (2016 dollars). The after-tax increases in sponsor fees from single-source contracting were small in comparison (mean and median of $0.65 million and $0.25 million). For the data we examined, single-source contracting yielded substantial financial benefits over multi-source contracting, even after accounting for somewhat higher sponsor fees. Copyright © 2018 Elsevier HS Journals, Inc. All rights reserved.

1742-IJBCS-Article-Usaku Reuben

African Journals Online (AJOL)

hp

with fluid (Brune, 1990). The major property of this tannin formaldehyde adhesive is that it is the moset in ... dimensional network structure. They cannot be softened by heating for the purpose of reprocessing. Some of the ... computed on the basis of the original air- dried samples. Gelation times of Anogeissus Leiocarpus.

Dedicated robotics team reduces pre-surgical preparation time

Directory of Open Access Journals (Sweden)

Michael S Lasser

2012-01-01

Statistical Analysis Used: Analysis of variance; Two-sample t-test for unequal variances. Results: The first and last 100 cases were found to have similar age (P=0.27, BMI (P=0.11, and ASA (P=0.09. The average preoperative times were 66. 4 and 53.4 min, respectively (P<0.05. The second 100 patients treated were found to have a significantly shorter preoperative time when compared to the first 100 patients (P<0.05. When the first 100 cases were divided into cohorts of 10 cases the mean preoperative time for the first through fourth cohorts were 80.5, 69.3, 78.8, and 64.7 min, respectively. After treatment of our first 30 patients we found a significant drop in preoperative time. This persisted throughout the remainder of our experience. Conclusions: From the time of patient arrival a number of tasks are accomplished by the non-physician operating room staff during RALRP. The use of a consistent staff can decrease preoperative setup times and, therefore, the overall length of surgery.

Pramana – Journal of Physics | Indian Academy of Sciences

Indian Academy of Sciences (India)

The nanosized triterpenoid, arjunolic acid, showed efficient gelation of various organic solvents at low concentrations. The low molecular mass gelator molecules self-assembled in the solvents to form fibers of nanometer diameters. The movement of the solvent molecules was hindered inside the fibrous network leading to ...

Impact of protein pre-treatment conditions on the iron encapsulation efficiency of whey protein cold-set gel particles

NARCIS (Netherlands)

Martin, A.H.; Jong, G.A.H. de

2012-01-01

This paper investigates the possibility for iron fortification of food using protein gel particles in which iron is entrapped using cold-set gelation. The aim is to optimize the iron encapsulation efficiency of whey protein by giving the whey protein different heat treatment prior to gelation with

Preparation and in vitro evaluation of amoxicillin encapsulated in ...

African Journals Online (AJOL)

emulsion, ionotropic gelation or reverse micellar methods. The method used here is ionotropic gelation ... and deionized water (National Commission for. Energy Research and Development, University of Nigeria ... washed twice with distilled water and used for the particle size determination. A thin smear was made on a ...

The microstructure and rheology of homogeneous and phase separated gelatine gels

NARCIS (Netherlands)

Ersch, Carsten; Linden, van der Erik; Venema, Paul; Martin, Anneke

2016-01-01

The gelation of gelatine in mixtures of gelatine (type A or type B) and globular proteins (Whey Protein Isolate (WPI), Whey Protein Aggregates (WPA) and Soy Protein Isolate (SPI)) was studied with a focus on their phase separation during gelation. Confocal laser scanning microscopy, visual

Approaching time is important for assessment of endoscopic surgical skills.

Science.gov (United States)

Tokunaga, Masakazu; Egi, Hiroyuki; Hattori, Minoru; Yoshimitsu, Masanori; Sumitani, Daisuke; Kawahara, Tomohiro; Okajima, Masazumi; Ohdan, Hideki

2012-05-01

This study aimed to verify whether the approaching time (the time taken to reach the target point from another point, a short distance apart, during point-to-point movement in endoscopic surgery), assessed using the Hiroshima University Endoscopic Surgical Assessment Device (HUESAD), could distinguish the skill level of surgeons. Expert surgeons (who had performed more than 50 endoscopic surgeries) and novice surgeons (who had no experience in performing endoscopic surgery) were tested using the HUESAD. The approaching time, total time, and intermediate time (total time--approaching time) were measured and analyzed using the trajectory of the tip of the instrument. The approaching time and total time were significantly shorter in the expert group than in the novice group (p time did not significantly differ between the groups (p > 0.05). The approaching time, which is a component of the total time, is very mportant in the measurement of the total time to assess endoscopic surgical skills. Further, the approaching time was useful for skill assessment by the HUESAD for evaluating the skill of surgeons performing endoscopic surgery.

A multiscale view on inverse statistics and gain/loss asymmetry in financial time series

International Nuclear Information System (INIS)

Siven, Johannes; Lins, Jeffrey; Hansen, Jonas Lundbek

2009-01-01

Researchers have studied the first-passage time of financial time series and observed that the smallest time interval needed for a stock index to move a given distance is typically shorter for negative than for positive price movements. The same is not observed for the index constituents, the individual stocks. We use the discrete wavelet transform to show that this is a long, rather than short, timescale phenomenon—if enough low frequency content of the price process is removed, the asymmetry disappears. We also propose a model which explains the asymmetry in terms of prolonged, correlated downward movements of individual stocks

Effect of Xanthan Gum on the Rheological Behavior and Microstructure of Sodium Caseinate Acid Gels

Directory of Open Access Journals (Sweden)

María E. Hidalgo

2016-09-01

Full Text Available The aim of this work was to study the effect of xanthan gum (XG on the gelation process of bovine sodium caseinate (NaCAS induced by acidification with glucono-δ-lactone (GDL and on the mixed acid gel microstructure. Before GDL addition, segregative phase separation was observed in all the NaCAS-XG mixtures evaluated. The gelation process was analyzed by using a fractional factorial experimental design. The images of the microstructure of the mixed acid gels were obtained by conventional optical microscopy and the mean diameter of the interstices was determined. Both the elastic character and the microstructure of the gels depended on the concentrations of XG added. As XG concentration increased, the kinetics of the gelation process was modified and the degree of compactness and elasticity component of the gel network increased. The microstructure of gels depends on the balance among thermodynamic incompatibility, protein gelation and NaCAS-XG interactions.

Self-Assembly of Molecular Threads into Reversible Gels

Science.gov (United States)

Sayar, Mehmet; Stupp, Samuel I.

2001-03-01

Reversible gels formed by low concentrations of molecular gelators that self-assemble into fibers with molecular width and extremely long length have been studied via Monte Carlo simulations. The gelators of interest have two kinds of interactions, one governs self-assembly into fibers and the other provides inter-fiber connectivity to drive the formation of a network. The off-lattice Monte Carlo simulation presented here is based on a point particle representation of gelators. In this model each particle can form only two strong bonds, that enable linear fiber formation, but a variable number of weak bonds which provide inter-fiber connectivity. The gel formation has been studied as a function of concentration of monomers, the strength of interactions, number of bonding sites per particle for weak interactions, and the stiffness of the fibers. The simulation results are compared with two experimental systems synthesized in our group in order to understand gelation mechanisms.

Effect Of Electric Field Induced Texture On The Properties Of Piezoelectric Lead Zirconate Titanate

International Nuclear Information System (INIS)

Alkoy, S.

2010-01-01

Texturing a polycrystalline piezoelectric ceramic provide single-crystal like properties without experiencing any difficulties of single crystal growth process. This study reports a method to obtain texture in PbZr 0 .5Ti 0 .5O 3 ceramics by application of an electric field during gelation of a gelcast slurry. Gelcasting provides a means to lock the particles aligned under the application of a high electric field via gelation and this alignment in green body was retained after sintering. Monomer, cross linker and dispersant were dissolved in DI water and PZT powder was dispersed in this premix. Iniator and catalyzer were added to the slurry. An electric field was applied to the slurry for 30 min during gelation. XRD pattern of sintered samples indicates that PZT develops a tetragonal symmetry as a result of E-field applied during gelation. Dielectric constants and piezoelectric d 3 3 coefficients along and perpendicular to E-field are 1070 and 450 and 390 and 280 pC/N, respectively.

Speech timing and working memory in profoundly deaf children after cochlear implantation

OpenAIRE

Burkholder, Rose A.; Pisoni, David B.

2003-01-01

Thirty-seven profoundly deaf children between 8- and 9-years-old with cochlear implants and a comparison group of normal-hearing children were studied to measure speaking rates, digit spans, and speech timing during digit span recall. The deaf children displayed longer sentence durations and pauses during recall and shorter digit spans compared to the normal-hearing children. Articulation rates, measured from sentence durations, were strongly correlated with immediate memory span in both norm...

The Effect of Shorter Treatment Regimens for Hepatitis C on Population Health and Under Fixed Budgets.

Science.gov (United States)

Morgan, Jake R; Kim, Arthur Y; Naggie, Susanna; Linas, Benjamin P

2018-01-01

Direct acting antiviral hepatitis C virus (HCV) therapies are highly effective but costly. Wider adoption of an 8-week ledipasvir/sofosbuvir treatment regimen could result in significant savings, but may be less efficacious compared with a 12-week regimen. We evaluated outcomes under a constrained budget and cost-effectiveness of 8 vs 12 weeks of therapy in treatment-naïve, noncirrhotic, genotype 1 HCV-infected black and nonblack individuals and considered scenarios of IL28B and NS5A resistance testing to determine treatment duration in sensitivity analyses. We developed a decision tree to use in conjunction with Monte Carlo simulation to investigate the cost-effectiveness of recommended treatment durations and the population health effect of these strategies given a constrained budget. Outcomes included the total number of individuals treated and attaining sustained virologic response (SVR) given a constrained budget and incremental cost-effectiveness ratios. We found that treating eligible (treatment-naïve, noncirrhotic, HCV-RNA budget among both black and nonblack individuals, and our results suggested that NS5A resistance testing is cost-effective. Eight-week therapy provides good value, and wider adoption of shorter treatment could allow more individuals to attain SVR on the population level given a constrained budget. This analysis provides an evidence base to justify movement of the 8-week regimen to the preferred regimen list for appropriate patients in the HCV treatment guidelines and suggests expanding that recommendation to black patients in settings where cost and relapse trade-offs are considered.

Electrically conductive gold nanoparticle-chitosan thermosensitive hydrogels for cardiac tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Baei, Payam [Department of Stem Cells and Developmental Biology, Cell Science Research Center, Royan Institute for Stem Cell Biology and Technology, ACECR, Tehran (Iran, Islamic Republic of); Cardiovascular Engineering Laboratory, Faculty of Biomedical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran (Iran, Islamic Republic of); Jalili-Firoozinezhad, Sasan [Department of Biomedicine and Surgery, University Hospital Basel, University of Basel, Hebelstrasse 20, CH-4031 Basel (Switzerland); Department of Bioengineeringand IBB - Institute for Bioengineering and Biosciences, Instituto Superior Técnico, Universidade de Lisboa, Lisboa (Portugal); Rajabi-Zeleti, Sareh [Department of Stem Cells and Developmental Biology, Cell Science Research Center, Royan Institute for Stem Cell Biology and Technology, ACECR, Tehran (Iran, Islamic Republic of); Tafazzoli-Shadpour, Mohammad [Cardiovascular Engineering Laboratory, Faculty of Biomedical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran (Iran, Islamic Republic of); Baharvand, Hossein, E-mail: Baharvand@royaninstitute.org [Department of Stem Cells and Developmental Biology, Cell Science Research Center, Royan Institute for Stem Cell Biology and Technology, ACECR, Tehran (Iran, Islamic Republic of); Department of Developmental Biology, University of Science and Culture, ACECR, Tehran (Iran, Islamic Republic of); Aghdami, Nasser, E-mail: Nasser.Aghdami@royaninstitute.org [Department of Stem Cells and Developmental Biology, Cell Science Research Center, Royan Institute for Stem Cell Biology and Technology, ACECR, Tehran (Iran, Islamic Republic of)

2016-06-01

Injectable hydrogels that resemble electromechanical properties of the myocardium are crucial for cardiac tissue engineering prospects. We have developed a facile approach that uses chitosan (CS) to generate a thermosensitive conductive hydrogel with a highly porous network of interconnected pores. Gold nanoparticles (GNPs) were evenly dispersed throughout the CS matrix in order to provide electrical cues. The gelation response and electrical conductivity of the hydrogel were controlled by different concentrations of GNPs. The CS-GNP hydrogels were seeded with mesenchymal stem cells (MSCs) and cultivated for up to 14 days in the absence of electrical stimulations. CS-GNP scaffolds supported viability, metabolism, migration and proliferation of MSCs along with the development of uniform cellular constructs. Immunohistochemistry for early and mature cardiac markers showed enhanced cardiomyogenic differentiation of MSCs within the CS-GNP compared to the CS matrix alone. The results of this study demonstrate that incorporation of nanoscale electro-conductive GNPs into CS hydrogels enhances the properties of myocardial constructs. These constructs could find utilization for regeneration of other electroactive tissues. - Highlights: • Thermosensitive electro-conductive hydrogels were prepared from CS and GNPs. • Gelation time and conductivity were tuned by varying concentration of GNPs. • CS-2GNP with gelation time of 25.7 min and conductivity of 0.13 S·m{sup −1} was selected for in vitro studies. • CS-2GNP supported active metabolism, migration and proliferation of MSCs. • Expression of cardiac markers increased about two-fold in CS-2GNP compared to CS.

Electrically conductive gold nanoparticle-chitosan thermosensitive hydrogels for cardiac tissue engineering

International Nuclear Information System (INIS)

Baei, Payam; Jalili-Firoozinezhad, Sasan; Rajabi-Zeleti, Sareh; Tafazzoli-Shadpour, Mohammad; Baharvand, Hossein; Aghdami, Nasser

2016-01-01

Injectable hydrogels that resemble electromechanical properties of the myocardium are crucial for cardiac tissue engineering prospects. We have developed a facile approach that uses chitosan (CS) to generate a thermosensitive conductive hydrogel with a highly porous network of interconnected pores. Gold nanoparticles (GNPs) were evenly dispersed throughout the CS matrix in order to provide electrical cues. The gelation response and electrical conductivity of the hydrogel were controlled by different concentrations of GNPs. The CS-GNP hydrogels were seeded with mesenchymal stem cells (MSCs) and cultivated for up to 14 days in the absence of electrical stimulations. CS-GNP scaffolds supported viability, metabolism, migration and proliferation of MSCs along with the development of uniform cellular constructs. Immunohistochemistry for early and mature cardiac markers showed enhanced cardiomyogenic differentiation of MSCs within the CS-GNP compared to the CS matrix alone. The results of this study demonstrate that incorporation of nanoscale electro-conductive GNPs into CS hydrogels enhances the properties of myocardial constructs. These constructs could find utilization for regeneration of other electroactive tissues. - Highlights: • Thermosensitive electro-conductive hydrogels were prepared from CS and GNPs. • Gelation time and conductivity were tuned by varying concentration of GNPs. • CS-2GNP with gelation time of 25.7 min and conductivity of 0.13 S·m"−"1 was selected for in vitro studies. • CS-2GNP supported active metabolism, migration and proliferation of MSCs. • Expression of cardiac markers increased about two-fold in CS-2GNP compared to CS.

The impact of baking time and bread storage temperature on bread crumb properties.

Science.gov (United States)

Bosmans, Geertrui M; Lagrain, Bert; Fierens, Ellen; Delcour, Jan A

2013-12-15

Two baking times (9 and 24 min) and storage temperatures (4 and 25 °C) were used to explore the impact of heat exposure during bread baking and subsequent storage on amylopectin retrogradation, water mobility, and bread crumb firming. Shorter baking resulted in less retrogradation, a less extended starch network and smaller changes in crumb firmness and elasticity. A lower storage temperature resulted in faster retrogradation, a more rigid starch network with more water inclusion and larger changes in crumb firmness and elasticity. Crumb to crust moisture migration was lower for breads baked shorter and stored at lower temperature, resulting in better plasticized biopolymer networks in crumb. Network stiffening, therefore, contributed less to crumb firmness. A negative relation was found between proton mobilities of water and biopolymers in the crumb gel network and crumb firmness. The slope of this linear function was indicative for the strength of the starch network. Copyright © 2013 Elsevier Ltd. All rights reserved.

Time-reversal focusing of an expanding soliton gas in disordered replicas

KAUST Repository

Fratalocchi, Andrea; Armaroli, A.; Trillo, S.

2011-01-01

We investigate the properties of time reversibility of a soliton gas, originating from a dispersive regularization of a shock wave, as it propagates in a strongly disordered environment. An original approach combining information measures and spin glass theory shows that time-reversal focusing occurs for different replicas of the disorder in forward and backward propagation, provided the disorder varies on a length scale much shorter than the width of the soliton constituents. The analysis is performed by starting from a new class of reflectionless potentials, which describe the most general form of an expanding soliton gas of the defocusing nonlinear Schrödinger equation.

Time-reversal focusing of an expanding soliton gas in disordered replicas

KAUST Repository

Fratalocchi, Andrea

2011-05-31

We investigate the properties of time reversibility of a soliton gas, originating from a dispersive regularization of a shock wave, as it propagates in a strongly disordered environment. An original approach combining information measures and spin glass theory shows that time-reversal focusing occurs for different replicas of the disorder in forward and backward propagation, provided the disorder varies on a length scale much shorter than the width of the soliton constituents. The analysis is performed by starting from a new class of reflectionless potentials, which describe the most general form of an expanding soliton gas of the defocusing nonlinear Schrödinger equation.

HELIOSEISMIC SIGNATURE OF CHROMOSPHERIC DOWNFLOWS IN ACOUSTIC TRAVEL-TIME MEASUREMENTS FROM HINODE

International Nuclear Information System (INIS)

Nagashima, Kaori; Sekii, Takashi; Kosovichev, Alexander G.; Zhao Junwei; Tarbell, Theodore D.

2009-01-01

We report on a signature of chromospheric downflows in two emerging flux regions detected by time-distance helioseismology analysis. We use both chromospheric intensity oscillation data in the Ca II H line and photospheric Dopplergrams in the Fe I 557.6 nm line obtained by Hinode/SOT for our analyses. By cross-correlating the Ca II oscillation signals, we have detected a travel-time anomaly in the plage regions; outward travel times are shorter than inward travel times by 0.5-1 minute. However, such an anomaly is absent in the Fe I data. These results can be interpreted as evidence of downflows in the lower chromosphere. The downflow speed is estimated to be below 10 km s -1 . This result demonstrates a new possibility of studying chromospheric flows by time-distance analysis.

Cycle Time and Throughput Rate Modelling Study through the Simulation Platform

Directory of Open Access Journals (Sweden)

Fei Xiong

2014-02-01

Full Text Available The shorter cycle time (CT and higher throughput rate (TH are primary goals of the industry, including sensors and transducer factory. The common way of cycle time reduction is to reduce WIP, but such action may also reduce throughput. This paper will show one practical healthy heuristic algorithm based on tool time modelling to balance both the CT and the TH. This algorithm considers the factors that exist in the work in process (WIP and its constrains in modules of the factory. One computer simulation platform based on a semiconductor factory is built to verify this algorithm. The result of computing simulation experiments suggests that the WIP level calculated by this algorithm can achieve the good balance of CT and TH.

Estimation of time-series properties of gourd observed solar irradiance data using cloud properties derived from satellite observations

Science.gov (United States)

Watanabe, T.; Nohara, D.

2017-12-01

The shorter temporal scale variation in the downward solar irradiance at the ground level (DSI) is not understood well because researches in the shorter-scale variation in the DSI is based on the ground observation and ground observation stations are located coarsely. Use of dataset derived from satellite observation will overcome such defect. DSI data and MODIS cloud properties product are analyzed simultaneously. Three metrics: mean, standard deviation and sample entropy, are used to evaluate time-series properties of the DSI. Three metrics are computed from two-hours time-series centered at the observation time of MODIS over the ground observation stations. We apply the regression methods to design prediction models of each three metrics from cloud properties. The validation of the model accuracy show that mean and standard deviation are predicted with a higher degree of accuracy and that the accuracy of prediction of sample entropy, which represents the complexity of time-series, is not high. One of causes of lower prediction skill of sample entropy is the resolution of the MODIS cloud properties. Higher sample entropy is corresponding to the rapid fluctuation, which is caused by the small and unordered cloud. It seems that such clouds isn't retrieved well.

Observed travel times for Multiply-reflected ScS waves from a deep-focus earthquake

Directory of Open Access Journals (Sweden)

A. F. ESPISOSA

1966-06-01

Full Text Available Tlie deep-focus Argentinean earthquake of December 8
1962, generated multiply reflected ScS phases which were recorded very
clearly at stations of the IGY and the TJSC&GS standardized worldwide
networks and at Canadian stations. The data gathered from this earthquake
for the multiply-reflected ScS and sScS were used to construct the
travel times and to extend them to shorter epicentral distances. These
new data brought to light an error in published travel times for the 2(ScS
phase.

Effect of temperature on the morphology and electro-optical properties of liquid crystal physical gel

International Nuclear Information System (INIS)

Leaw, W.L.; Mamat, C.R.; Triwahyono, S.; Jalil, A.A.; Bidin, N.

2016-01-01

Liquid crystal physical gels were (thermally) prepared with cholesteryl stearate as a gelator in nematic liquid crystal, 4-cyano-4′-pentylbiphenyl. The electro-optical performance of liquid crystal physical gels is almost entirely dependent on the gels' inherent morphology. This study involved an empirical investigation of the relationships among all of the gelation temperature, morphology, and electro-optical properties. Besides continuous cooling at room temperature, isothermal cooling was also performed at both 18 and 0 °C, corresponding to near-solid and solid phases of 4-cyano-4′-pentylbiphenyl respectively. Nevertheless, the liquid crystal physical gel was also isothermally rapidly cooled using liquid nitrogen. Polarizing optical microscopy showed that the gel structure became thinner when isothermal cooling was carried out. These thinner gel aggregates then interconnected to form larger liquid crystal domains. Moreover, it was also revealed that the gel networks were randomized. Electron spin resonance results showed that the liquid crystal director orientation was severely randomized in the presence of gel networks. Conversely, isothermal cooling using liquid nitrogen generated a higher liquid crystal director orientation order. The 6.0 wt% cholesteryl stearate/4-cyano-4′-pentylbiphenyl physical gel that was isothermally cooled using liquid nitrogen showed the lowest response time in a twisted nematic mode optical cell. - Graphical abstract: Liquid crystal physical gel was prepared using nematic liquid crystal, 4-cyano-4′-pentylbiphenyl and cholesteryl stearate as gelator. Isothermal cooling at lower temperature produced thinner gel network and larger liquid crystal domain. - Highlights: • 5CB nematic liquid crystal was successfully gelled by cholesteryl stearate gelator. • The morphology of gel network was controlled by different cooling conditions. • Thinner gel network was formed by the rapid cooling using liquid nitrogen. • Enhanced

Effect of temperature on the morphology and electro-optical properties of liquid crystal physical gel

Energy Technology Data Exchange (ETDEWEB)

Leaw, W.L. [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Mamat, C.R., E-mail: che@kimia.fs.utm.my [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Triwahyono, S. [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Jalil, A.A. [Department of Chemical Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Centre of Hydrogen Energy, Institute of Future Energy, Univerisiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Bidin, N. [Department of Physics, Faculty of Science, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia)

2016-12-01

Liquid crystal physical gels were (thermally) prepared with cholesteryl stearate as a gelator in nematic liquid crystal, 4-cyano-4′-pentylbiphenyl. The electro-optical performance of liquid crystal physical gels is almost entirely dependent on the gels' inherent morphology. This study involved an empirical investigation of the relationships among all of the gelation temperature, morphology, and electro-optical properties. Besides continuous cooling at room temperature, isothermal cooling was also performed at both 18 and 0 °C, corresponding to near-solid and solid phases of 4-cyano-4′-pentylbiphenyl respectively. Nevertheless, the liquid crystal physical gel was also isothermally rapidly cooled using liquid nitrogen. Polarizing optical microscopy showed that the gel structure became thinner when isothermal cooling was carried out. These thinner gel aggregates then interconnected to form larger liquid crystal domains. Moreover, it was also revealed that the gel networks were randomized. Electron spin resonance results showed that the liquid crystal director orientation was severely randomized in the presence of gel networks. Conversely, isothermal cooling using liquid nitrogen generated a higher liquid crystal director orientation order. The 6.0 wt% cholesteryl stearate/4-cyano-4′-pentylbiphenyl physical gel that was isothermally cooled using liquid nitrogen showed the lowest response time in a twisted nematic mode optical cell. - Graphical abstract: Liquid crystal physical gel was prepared using nematic liquid crystal, 4-cyano-4′-pentylbiphenyl and cholesteryl stearate as gelator. Isothermal cooling at lower temperature produced thinner gel network and larger liquid crystal domain. - Highlights: • 5CB nematic liquid crystal was successfully gelled by cholesteryl stearate gelator. • The morphology of gel network was controlled by different cooling conditions. • Thinner gel network was formed by the rapid cooling using liquid nitrogen. �

Impact of thoracic radiotherapy timing in limited-stage small-cell lung cancer: usefulness of the individual patient data meta-analysis.

Science.gov (United States)

De Ruysscher, D; Lueza, B; Le Péchoux, C; Johnson, D H; O'Brien, M; Murray, N; Spiro, S; Wang, X; Takada, M; Lebeau, B; Blackstock, W; Skarlos, D; Baas, P; Choy, H; Price, A; Seymour, L; Arriagada, R; Pignon, J-P

2016-10-01

Chemotherapy (CT) combined with radiotherapy is the standard treatment of 'limited-stage' small-cell lung cancer. However, controversy persists over the optimal timing of thoracic radiotherapy and CT. We carried out a meta-analysis of individual patient data in randomized trials comparing earlier versus later radiotherapy, or shorter versus longer radiotherapy duration, as defined in each trial. We combined the results from trials using the stratified log-rank test to calculate pooled hazard ratios (HRs). The primary outcome was overall survival. Twelve trials with 2668 patients were eligible. Data from nine trials comprising 2305 patients were available for analysis. The median follow-up was 10 years. When all trials were analysed together, 'earlier or shorter' versus 'later or longer' thoracic radiotherapy did not affect overall survival. However, the HR for overall survival was significantly in favour of 'earlier or shorter' radiotherapy among trials with a similar proportion of patients who were compliant with CT (defined as having received 100% or more of the planned CT cycles) in both arms (HR 0.79, 95% CI 0.69-0.91), and in favour of 'later or longer' radiotherapy among trials with different rates of CT compliance (HR 1.19, 1.05-1.34, interaction test, P < 0.0001). The absolute gain between 'earlier or shorter' versus 'later or longer' thoracic radiotherapy in 5-year overall survival for similar and for different CT compliance trials was 7.7% (95% CI 2.6-12.8%) and -2.2% (-5.8% to 1.4%), respectively. However, 'earlier or shorter' thoracic radiotherapy was associated with a higher incidence of severe acute oesophagitis than 'later or longer' radiotherapy. 'Earlier or shorter' delivery of thoracic radiotherapy with planned CT significantly improves 5-year overall survival at the expense of more acute toxicity, especially oesophagitis. © The Author 2016. Published by Oxford University Press on behalf of the European Society for Medical Oncology. All rights

Evaluation of time lapse for establishing distal tubal occlusion diagnosis during hysterosalpingography procedure performed by using water soluble contrast media

Directory of Open Access Journals (Sweden)

Serkan Kahyaoglu

2017-05-01

Conclusion: Although a trend exists towards shorter time period intervals between the first uterine visualization and distal tubal filling graphy among patients with tubal patency, rather than patients with distal tubal occlusion confirmed by diagnostic laparoscopy, clinically reliable objective time period intervals for finalizing the HSG procedure and proceeding with diagnostic laparoscopy due to distal tubal occlusion diagnosis on HSG could not be detected.

Description of recovery method used for curdlan produced by Agrobacterium sp. IFO 13140 and its relation to the morphology and physicochemical and technological properties of the polysaccharide.

Science.gov (United States)

Mangolim, Camila Sampaio; Silva, Thamara Thaiane da; Fenelon, Vanderson Carvalho; Koga, Luciana Numata; Ferreira, Sabrina Barbosa de Souza; Bruschi, Marcos Luciano; Matioli, Graciette

2017-01-01

Curdlan is a linear polysaccharide considered a dietary fiber and with gelation properties. This study evaluated the structure, morphology and the physicochemical and technological properties of curdlan produced by Agrobacterium sp. IFO 13140 recovered by pre-gelation and precipitation methods. Commercial curdlan submitted or otherwise to the pre-gelation process was also evaluated. The data obtained from structural analysis revealed a similarity between the curdlan produced by Agrobacterium sp. IFO 13140 (recovered by both methods) and the commercial curdlans. The results showed that the curdlans evaluated differed significantly in terms of dispersibility and gelation, and only the pre-gelled ones had significant potential for food application, because this method influence on the size of the particles and in the presence of NaCl. In terms of technological properties, the curdlan produced by Agrobacterium sp. IFO 13140 (pre-gelation method) had a greater water and oil holding capacity (64% and 98% greater, respectively) and a greater thickening capacity than the pre-gelled commercial curdlan. The pre-gelled commercial curdlan displayed a greater gelling capacity at 95°C than the others. When applied to food, only the pre-gelled curdlans improved the texture parameters of yogurts and reduced syneresis. The curdlan gels, which are rigid and stable in structure, demonstrated potential for improving the texture of food products, with potential industrial use.

An OPTIMIZE study retrospective analysis for management of telaprevir-treated hepatitis C virus (HCV)-infected patients by use of the Abbott RealTime HCV RNA assay.

Science.gov (United States)

Sarrazin, Christoph; Dierynck, Inge; Cloherty, Gavin; Ghys, Anne; Janssen, Katrien; Luo, Donghan; Witek, James; Buti, Maria; Picchio, Gaston; De Meyer, Sandra

2015-04-01

Protease inhibitor (PI)-based response-guided triple therapies for hepatitis C virus (HCV) infection are still widely used. Noncirrhotic treatment-naive and prior relapser patients receiving telaprevir-based treatment are eligible for shorter, 24-week total therapy if HCV RNA is undetectable at both weeks 4 and 12. In this study, the concordance in HCV RNA assessments between the Roche High Pure System/Cobas TaqMan and Abbott RealTime HCV RNA assays and the impacts of different HCV RNA cutoffs on treatment outcome were evaluated. A total of 2,629 samples from 663 HCV genotype 1 patients receiving telaprevir/pegylated interferon/ribavirin in OPTIMIZE were analyzed using the High Pure System and reanalyzed using Abbott RealTime (limits of detection, 15.1 IU/ml versus 8.3 IU/ml; limits of quantification, 25 IU/ml versus 12 IU/ml, respectively). Overall, good concordance was observed between the assays. Using undetectable HCV RNA at week 4, 34% of the patients would be eligible for shorter treatment duration with Abbott RealTime versus 72% with the High Pure System. However, using Abbott RealTime, a similar proportion (74%) would be eligible. Of the patients receiving 24-week total therapy, 87% achieved a sustained virologic response with undetectable HCV RNA by the High Pure System or Abbott RealTime; however, 92% of the patients with undetectable HCV RNA by Abbott RealTime achieved a sustained virologic response. Using undetectable HCV RNA as the cutoff, the more sensitive Abbott RealTime assay would identify fewer patients eligible for shorter treatment than the High Pure System. Our data confirm the Abbott RealTime assay, to determine eligibility for shortened PI-based HCV treatment. (The study was registered with ClinicalTrials.gov under registration no. NCT01241760.). Copyright © 2015, American Society for Microbiology. All Rights Reserved.

Factors affecting colonoscope insertion time in patients with or without a colostomy after left-sided colorectal resection.

Science.gov (United States)

Jang, Hui Won; Kim, Yoon Nam; Nam, Chung Mo; Lee, Hyun Jung; Park, Soo Jung; Hong, Sung Pil; Kim, Tae Il; Kim, Won Ho; Cheon, Jae Hee

2012-12-01

We examined whether the insertion time for colonoscopies performed after left-sided resection was different in patients with a colostomy from that in patients without a colostomy and identified factors that could impact colonoscopy performance. We included consecutive patients who underwent colonoscopy between July 2005 and March 2011 after left-sided colorectal resection for colorectal cancer. We classified surgical methods according to the presence or absence of a colostomy and evaluated colonoscope insertion time retrospectively. Furthermore, we analyzed factors that might affect insertion time. A total of 1,041 patients underwent colonoscopy after left-sided colorectal resection during the study period. The colonoscopy completion rate was 98.6 %, and the mean insertion time was 6.1 ± 4.6 min (median 4.7 min, range 0.3-35.8 min). A shorter resection length of colon, the presence of a colostomy, and a lower endoscopist case volume were found to be independent factors associated with prolonged insertion time in patients with left-sided colorectal resection. Among experienced colonoscopists, no colonoscopy-associated or clinical factors were found to affect insertion time. However, a shorter resection length of colon, the presence of a colostomy, and poor bowel preparation were associated with prolonged insertion time among inexperienced endoscopists. We identified three factors that affect colonoscope insertion time after left-sided colorectal resection, including the presence of a colostomy. Inexperienced endoscopists were much more affected by the presence of a colostomy after left-sided colorectal resection. These findings have implications for the practice and teaching of colonoscopy after left-sided colorectal resection.

Remote real-time monitoring of free flaps via smartphone photography and 3G wireless Internet: a prospective study evidencing diagnostic accuracy.

Science.gov (United States)

Engel, Holger; Huang, Jung Ju; Tsao, Chung Kan; Lin, Chia-Yu; Chou, Pan-Yu; Brey, Eric M; Henry, Steven L; Cheng, Ming Huei

2011-11-01

This prospective study was designed to compare the accuracy rate between remote smartphone photographic assessments and in-person examinations for free flap monitoring. One hundred and three consecutive free flaps were monitored with in-person examinations and assessed remotely by three surgeons (Team A) via photographs transmitted over smartphone. Four other surgeons used the traditional in-person examinations as Team B. The response time to re-exploration was defined as the interval between when a flap was evaluated as compromised by the nurse/house officer and when the decision was made for re-exploration. The accuracy rate was 98.7% and 94.2% for in-person and smartphone photographic assessments, respectively. The response time of 8 ± 3 min in Team A was statistically shorter than the 180 ± 104 min in Team B (P = 0.01 by the Mann-Whitney test). The remote smartphone photography assessment has a comparable accuracy rate and shorter response time compared with in-person examination for free flap monitoring. Copyright © 2011 Wiley Periodicals, Inc.

Neutrino flavor instabilities in a time-dependent supernova model

Energy Technology Data Exchange (ETDEWEB)

Abbar, Sajad; Duan, Huaiyu, E-mail: duan@unm.edu

2015-12-17

A dense neutrino medium such as that inside a core-collapse supernova can experience collective flavor conversion or oscillations because of the neutral-current weak interaction among the neutrinos. This phenomenon has been studied in a restricted, stationary supernova model which possesses the (spatial) spherical symmetry about the center of the supernova and the (directional) axial symmetry around the radial direction. Recently it has been shown that these spatial and directional symmetries can be broken spontaneously by collective neutrino oscillations. In this letter we analyze the neutrino flavor instabilities in a time-dependent supernova model. Our results show that collective neutrino oscillations start at approximately the same radius in both the stationary and time-dependent supernova models unless there exist very rapid variations in local physical conditions on timescales of a few microseconds or shorter. Our results also suggest that collective neutrino oscillations can vary rapidly with time in the regimes where they do occur which need to be studied in time-dependent supernova models.

Different Perceptions of Time Passage Among Older People: A Comparative Study in Terms of Age and Gender

Directory of Open Access Journals (Sweden)

Mohammad Ali Nazari

2016-04-01

Conclusion: Research findings indicate that age affects time perception so that perceived time in the elderly people is shorter than the real physical time. Our findings also showed that if sources pay less attention to the passage of time or the memory capacity declines, the time estimation will be less. Based on cognitive changes in old age, the cognitive abilities of older people were found to decrease with increasing age. As the accurate processing of time intervals relates to memory capacity and attention, the changes in any cognitive process could affect the differences in the perception of time. Probably due to these factors, the reproduction of time in the older people shortens.

Dwell time dependent morphological transition and sputtering yield of ion sputtered Sn

International Nuclear Information System (INIS)

Qian, H X; Zeng, X R; Zhou, W

2010-01-01

Self-organized nano-scale patterns may appear on a wide variety of materials irradiated with an ion beam. Good manipulation of these structures is important for application in nanostructure fabrication. In this paper, dwell time has been demonstrated to be able to control the ripple formation and sputtering yield on Sn surface. Ripples with a wavelength of 1.7 μm were observed for a dwell time in the range 3-20 μs, whereas much finer ripples with a wavelength of 540 nm and a different orientation were observed for a shorter dwell time in the range 0.1-2 μs. The sputtering yield increases with dwell time significantly. The results provide a new basis for further steps in the theoretical description of morphology evolution during ion beam sputtering.

Gels and lyotropic liquid crystals: using an imidazolium-based catanionic surfactant in binary solvents.

Science.gov (United States)

Cheng, Ni; Hu, Qiongzheng; Bi, Yanhui; Xu, Wenwen; Gong, Yanjun; Yu, Li

2014-08-05

The self-assembly behavior of an imidazolium-based catanionic surfactant, 1-butyl-3-methylimidazolium dodecylsulfate ([C4mim][C12H25SO4]), was investigated in water-ethylammonium nitrate (EAN) mixed solvents with different volume ratios. It is particular interesting that this simple surfactant could not only form lyotropic liquid crystals (LLC) with multimesophases, i.e., normal hexagonal (H1), lamellar liquid crystal (Lα), and reverse bicontinuous cubic phase (V2), in the water-rich environment but also act as an efficient low-molecular-weight gelator (LMWG) which gelated EAN-abundant binary media in a broad concentration range. The peculiar nanodisk cluster morphology of gels composed of similar bilayer units was first observed. FT-IR spectra and density functional theory (DFT) calculations reveal that strong H bonding and electrostatic interactions between EAN and the headgroups of [C4mim][C12H25SO4] are primarily responsible for gelation. The self-assembled gels displayed excellent mechanical strength and a thermoreversible sol-gel transition. It is for the first time that a rich variety of controllable ordered aggregates could be observed only by simply modulating the concentration of a single imidazolium-based catanionic surfactant or the ratio of mixed solvents. This environmentally friendly system is expected to have broad applications in various fields, such as materials science, drug delivery systems, and supramolecular chemistry.

Dissolution and regeneration of non-mulberry Eriogyna Pyretorum silk fibroin

Science.gov (United States)

Guo, Yuhang; Li, Xiufang; Zhang, Qiang; Yan, Shuqin; You, Renchuan

2017-10-01

Protein-based materials have been actively pursued as biomaterials because of their nontoxicity, biocompatibility and biodegradability. In this work, we demonstrated the potential of Eriogyna pyretorum silk fibroin (ESF), a non-mulberry silk protein, as biomaterials. The degummed ESF fibers could be dissolved completely by Ca(NO3)2/H2O/C2H5OH solution to produce regenerated ESF. The solubility was strongly dependent on the addition of C2H5OH, heating temperature and dissolving time. α-helix and random coil are main molecular conformation in aqueous ESF solution. The sol-gel transition behavior of regenerated ESF was also studied, indicating that the conformational transition of regenerated ESF from random coil/α-helix to β-sheet during gelation. Especially, ESF showed more rapid gelation than mulberry silk fibroin (BSF). Consequently, the gelation rate of BSF could be controlled ranging from tens of minutes to days by changing the ESF ratio, providing useful options for the fabrication of silk hydrogels. Water-stable regenerated ESF film could be achieved by using aqueous ethanol to induce structural transition. Tensile tests showed that the ESF films have a dry strength of approximate 31.0 MPa and a wet strength of approximate 3.3 MPa. This study provides new opportunities as an alternative natural protein material for biomedical applications.

Preparation of Chitosan-based Injectable Hydrogels and Its Application in 3D Cell Culture.

Science.gov (United States)

Li, Yongsan; Zhang, Yaling; Wei, Yen; Tao, Lei

2017-09-29

The protocol presents a facile, efficient, and versatile method to prepare chitosan-based hydrogels using dynamic imine chemistry. The hydrogel is prepared by mixing solutions of glycol chitosan with a synthesized benzaldehyde terminated polymer gelator, and hydrogels are efficiently obtained in several minutes at room temperature. By varying ratios between glycol chitosan, polymer gelator, and water contents, versatile hydrogels with different gelation times and stiffness are obtained. When damaged, the hydrogel can recover its appearances and modulus, due to the reversibility of the dynamic imine bonds as crosslinkages. This self-healable property enables the hydrogel to be injectable since it can be self-healed from squeezed pieces to an integral bulk hydrogel after the injection process. The hydrogel is also multi-responsive to many bio-active stimuli due to different equilibration statuses of the dynamic imine bonds. This hydrogel was confirmed as bio-compatible, and L929 mouse fibroblast cells were embedded following standard procedures and the cell proliferation was easily assessed by a 3D cell cultivation process. The hydrogel can offer an adjustable platform for different research where a physiological mimic of a 3D environment for cells is profited. Along with its multi-responsive, self-healable, and injectable properties, the hydrogels can potentially be applied as multiple carriers for drugs and cells in future bio-medical applications.

Coupling the Alkaline-Surfactant-Polymer Technology and the Gelation Technology to Maximize Oil Production

Energy Technology Data Exchange (ETDEWEB)

Malcolm Pitts; Jie Qi; Dan Wilson; Phil Dowling; David Stewart; Bill Jones

2005-12-01

Gelation technologies have been developed to provide more efficient vertical sweep efficiencies for flooding naturally fractured oil reservoirs or reservoirs with different sand lenses with high permeability contrast. The field proven alkaline-surfactant-polymer technology economically recovers 15% to 25% OOIP more crude oil than waterflooding froin swept pore space of an oil reservoir. However, alkaline-surfactant-polymer technology is not amenable to naturally fractured reservoirs or reservoirs with high permeability contrast zones because much of injected solution bypasses target pore space containing oil. This work investigates whether combining these two technologies could broaden applicability of alkaline-surfactant-polymer flooding into these reservoirs. Fluid-fluid interaction with different gel chemical compositions and alkaline-surfactant-polymer solution with pH values ranging from 9.2 to 12.9 have been tested. Aluminum-polyacrylamide gels are not stable to alkaline-surfactant-polymer solutions at any pH. Chromium-polyacrylamide gels with polymer to chromium ion ratios of 25 or greater were stable to alkaline-surfactant-polymer solutions if solution pH was 10.6 or less. When the polymer to chromium ion was 15 or less, chromium-polyacrylamide gels were stable to alkaline-surfactant-polymer solutions with pH values up to 12.9. Chromium-xanthan gum gels were stable to alkaline-surfactant-polymer solutions with pH values of 12.9 at the polymer to chromium ion ratios tested. Silicate-polyacrylamide, resorcinol-formaldehyde, and sulfomethylated resorcinol-formaldehyde gels were also stable to alkaline-surfactant-polymer solutions with pH values ranging from 9.2 to 12.9. Iron-polyacrylamide gels were immediately destroyed when contacted with any of the alkaline-surfactant-polymer solutions with pH values ranging from 9.2 to 12.9. Gel solutions under dynamic conditions of linear corefloods showed similar stability to alkaline-surfactant-polymer solutions as in

Enhanced proton conductivity of yttrium-doped barium zirconate with sinterability in protonic ceramic fuel cells

International Nuclear Information System (INIS)

Park, Ka-Young; Seo, Yongho; Kim, Ki Buem; Song, Sun-Ju; Park, Byoungnam; Park, Jun-Young

2015-01-01

Highlights: • Report effects of ceramic processing methods on the electrical conductivity of BZY. • Present effects of sintering aids on the conductivity and density of BZY. • CuO is the most effective sintering aid for the BZY. • Polymer gelation is the most effective method in terms of conductivity of BZY. • Grain boundary conductivity of the polymer gelation BZY is higher than others. - Abstract: In this study, we report the effects of various ceramic processing methods with different sintering aids on the relative density, crystallinity, microstructure, and electrical conductivity of proton conducting BaZr 0.85 Y 0.15 O 3−δ (BZY) pellets in details. First, the BZY ceramic pellets are fabricated by the solid-state reactive sintering by adding diverse sintering aids including CuO, NiO, ZnO, SnO, MgO, and Al 2 O 3 . Among these, CuO is found to be the most effective sintering aid in terms of the sintering temperature and total conductivity. However, transition metals as sintering aids have detrimental effects on the electrical conductivity of the BZY electrolytes. Second, the BZY electrolytes have been synthesized by four different methods: the solid-state, combustion, hydrothermal, and polymer gelation methods. The BZY pellets synthesized by the polymer gelation method exhibit dense microstructure with a high relative density of 95.3%. Moreover, the electrical conductivity of the BZY pellets synthesized by the polymer gelation method is higher than those prepared by the solid-state methods under the same test conditions: 1.28 × 10 −2 S cm −1 (by the polymer gelation method) vs. 0.53 × 10 −2 S cm −1 by the solid-state method at 600 °C in wet 5% H 2 in Ar

Solubilization of bovine gelatin using power ultrasound: gelation without heating.

Science.gov (United States)

Farahnaky, Asgar; Zendeboodi, Fatemeh; Azizi, Rezvan; Mesbahi, Gholamreza; Majzoobi, Mahsa

2017-04-01

The aim of this study was to investigate the efficacy of power ultrasound without using any heating stage in solubilizeing gelatin dispersions, and to characterize the mechanical and microstructural properties of the resulting gels using texture analysis and scanning electron microscopy, respectively. Usually to prepare a gel from gelatin, a primary heating stage of at about 40C or above is required to solubilize gelatin macromolecules. In this study solubilizing gelatin dispersions using power ultrasound without any heating was successfully performed. For solubilising gelatin, an ultrasound equipment with a frequency of 20 kHz, amplitude of 100% and power range of 50-150 W was used. Aqueous gelatin dispersions (4% w/v) were subjected to ultrasound for different times (40-240 s) at a constant temperature of 13C. Applying ultrasound to gelatin dispersions caused increases in water absorption and water solubility of the hydrocolloid. The textural parameters of the resulting gelatin gels, increased with increasing time and power of ultrasound. Moreover, a generalized Maxwell model with three elements was used for calculating relaxation times of the gels. The microstructural observations by SEM showed that the structural cohesiveness of the gels increased by increasing ultrasonication time. Ultrasound-assisted solubilization of gelatin can have emerging implications for industrial uses in pharmaceuticals, food and non-food systems. Usually to prepare a gel from gelatin, a primary heating stage of at about 40C or above is required to solubilize gelatin macromolecules. Therefore, the use of gelatin as a hydrocolloid in food processings or pharmaceutical formulations which lack a heating step has been a technological and practical challenge. In this study solubilizing gelatin dispersions using power ultrasound without any heating was successfully performed. Ultrasound-assisted solubilisation of gelatin can have emerging implications for industrial uses in pharmaceuticals

Heterogeneous dynamics of ionic liquids: A four-point time correlation function approach

Science.gov (United States)

Liu, Jiannan; Willcox, Jon A. L.; Kim, Hyung J.

2018-05-01

Many ionic liquids show behavior similar to that of glassy systems, e.g., large and long-lasted deviations from Gaussian dynamics and clustering of "mobile" and "immobile" groups of ions. Herein a time-dependent four-point density correlation function—typically used to characterize glassy systems—is implemented for the ionic liquids, choline acetate, and 1-butyl-3-methylimidazolium acetate. Dynamic correlation beyond the first ionic solvation shell on the time scale of nanoseconds is found in the ionic liquids, revealing the cooperative nature of ion motions. The traditional solvent, acetonitrile, on the other hand, shows a much shorter length-scale that decays after a few picoseconds.

Effect of temperature and aging time on the rheological behavior of aqueous poly(ethylene glycol)/Laponite RD dispersions.

Science.gov (United States)

Morariu, Simona; Bercea, Maria

2012-01-12

The viscoelastic properties of 2% poly(ethylene glycol) aqueous solutions containing Laponite RD from 1% to 4% were investigated by oscillatory and flow measurements in the temperature range of 15-40 °C. The enhancement of the clay content from mixture causes the increase of the viscoelastic moduli and the change of the flow from liquid-like behavior (Maxwellian fluid) to a solid-like one at a set temperature. The longest relaxation times (τ(1)) of the mixtures with low clay concentrations (1% and 2%) are not affected by changes in temperature unlike the samples having high content of clay at which τ(1) increases above 30 °C and below 17.5 °C. The characteristic behavior of the mixtures with the high clay concentration could be explained by considering the effect of Brownian motion on the network structure formed in these dispersions as well as by the poor solubility of poly(ethylene glycol) in water at high temperatures. The flow activation energy was determined and discussed. An abrupt increase of the flow activation energy was evidenced between 2% and 3% Laponite RD. The rheological measurements carried out at different rest times showed a decrease of the gelation time from 1 week to 2 h when the clay concentration increases from 2% to 4%. The aging kinetics of poly(ethylene glycol)/Laponite RD/water mixtures, investigated at 25 °C, revealed the increase of the viscosity-rate kinetic constant by increasing the clay concentration.

Stochastic inflation as a time-dependent random walk

International Nuclear Information System (INIS)

Kandrup, H.E.

1989-01-01

This paper exploits the ''stochastic inflation'' paradigm introduced by Starobinskii to study the evolution of long-wavelength modes for a free scalar field Phi in an inflationary Universe. By relaxing the assumption of a ''slow roll,'' it becomes obvious that the well-known late-time infrared divergence of the vacuum for a massless field in de Sitter space may be viewed as a consequence of the fluctuation-dissipation theorem. This stochastic model is also extended to allow for nonvacuum states and power-law inflation, situations where the fluctuation-dissipation theorem no longer holds. One recovers the correct late-time form for the expectation value 2 > in these cases as well, corroborating thereby the intuitive picture that, quite generally, the long-wavelength modes of the field evolve in a thermal ''bath'' provided by the shorter-wavelength modes

Chiroptical studies on supramolecular chirality of molecular aggregates.

Science.gov (United States)

Sato, Hisako; Yajima, Tomoko; Yamagishi, Akihiko

2015-10-01

The attempts of applying chiroptical spectroscopy to supramolecular chirality are reviewed with a focus on vibrational circular dichroism (VCD). Examples were taken from gels, solids, and monolayers formed by low-molecular mass weight chiral gelators. Particular attention was paid to a group of gelators with perfluoroalkyl chains. The effects of the helical conformation of the perfluoroalkyl chains on the formation of chiral architectures are reported. It is described how the conformation of a chiral gelator was determined by comparing the experimental and theoretical VCD spectra together with a model proposed for the molecular aggregation in fibrils. The results demonstrate the potential utility of the chiroptical method in analyzing organized chiral aggregates. © 2015 Wiley Periodicals, Inc.

In vivo time-gated fluorescence imaging with biodegradable luminescent porous silicon nanoparticles.

Science.gov (United States)

Gu, Luo; Hall, David J; Qin, Zhengtao; Anglin, Emily; Joo, Jinmyoung; Mooney, David J; Howell, Stephen B; Sailor, Michael J

2013-01-01

Fluorescence imaging is one of the most versatile and widely used visualization methods in biomedical research. However, tissue autofluorescence is a major obstacle confounding interpretation of in vivo fluorescence images. The unusually long emission lifetime (5-13 μs) of photoluminescent porous silicon nanoparticles can allow the time-gated imaging of tissues in vivo, completely eliminating shorter-lived (50-fold in vitro and by >20-fold in vivo when imaging porous silicon nanoparticles. Time-gated imaging of porous silicon nanoparticles accumulated in a human ovarian cancer xenograft following intravenous injection is demonstrated in a live mouse. The potential for multiplexing of images in the time domain by using separate porous silicon nanoparticles engineered with different excited state lifetimes is discussed.

Can pre-season fitness measures predict time to injury in varsity athletes?: a retrospective case control study

Directory of Open Access Journals (Sweden)

Kennedy Michael D

2012-07-01

Full Text Available Abstract Background The ability to determine athletic performance in varsity athletes using preseason measures has been established. The ability of pre-season performance measures and athlete’s exposure to predict the incidence of injuries is unclear. Thus our purpose was to determine the ability of pre-season measures of athletic performance to predict time to injury in varsity athletes. Methods Male and female varsity athletes competing in basketball, volleyball and ice hockey participated in this study. The main outcome measures were injury prevalence, time to injury (based on calculated exposure and pre-season fitness measures as predictors of time to injury. Fitness measures were Apley’s range of motion, push-up, curl-ups, vertical jump, modified Illinois agility, and sit-and-reach. Cox regression models were used to identify which baseline fitness measures were predictors of time to injury. Results Seventy-six percent of the athletes reported 1 or more injuries. Mean times to initial injury were significantly different for females and males (40.6% and 66.1% of the total season (p , respectively. A significant univariate correlation was observed between push-up performance and time to injury (Pearson’s r = 0.332, p . No preseason fitness measure impacted the hazard of injury. Regardless of sport, female athletes had significantly shorter time to injury than males (Hazard Ratio = 2.2, p . Athletes playing volleyball had significantly shorter time to injury (Hazard Ratio = 4.2, p  compared to those playing hockey or basketball. Conclusions When accounting for exposure, gender, sport and fitness measures, prediction of time to injury was influenced most heavily by gender and sport.

Time to reach tacrolimus maximum blood concentration,mean residence time, and acute renal allograft rejection: an open-label, prospective, pharmacokinetic study in adult recipients.

Science.gov (United States)