Penalty model for delay of bidding section construction period in South-to-North Water Diversion Eastern Route Project from perspective of programs

Directory of Open Access Journals (Sweden)

Jing-chun Feng

2012-09-01

Full Text Available According to the multi-project and program management theory, this paper analyzes the program generation principle and establishes a program based on progress goals. On the basis of the present situation of calculation of penalty for delay of the bidding section construction period with the critical path method, we studied the effects of contractor-induced delay of the bidding section construction period in detail, including the effects on the construction period of the bidding section itself, the earliest start times of the next bidding section and other subsequent bidding sections, and the construction period of the program, and then constructed a penalty model for delay of the bidding section construction period from the perspective of programs. Using the penalty model, we conducted a practical analysis of penalty for delay of the construction period of the Baoying station program in the South-to-North Water Diversion Project. The model can help determine the amount of penalty for delay of the construction period in bidding sections scientifically and reasonably.

A study on the competitiveness improvement of the OPR1000 through reduction of the construction period

International Nuclear Information System (INIS)

Lee, Deuck Soo

2009-02-01

Current world's nuclear power plant markets change will provide variety opportunities to the Korean nuclear power plant industries. The economic competitiveness is the most significant issue to utilize the forthcoming 'Renaissance of Nuclear Power' as a chance of exporting OPR1000. To improve the competitiveness of the OPR1000, the capital cost which is the key factor of the generating cost of the nuclear power plant should be reduced. Reduction of the construction period is more important than the design improvement or facility change regarding capital cost perspectives. The aim of this study, therefore, is to introduce the parallel installation method for reducing the construction period to achieve the economic competitiveness. The parallel installation path was selected among critical paths by analyzing the construction schedules of the nuclear power plants built in Korea. Reactor Coolant Loop Installation and Reactor Vessel Internal Installation were selected for the parallel installation method in this study. Conventional installation method installs reactor vessel internal after finishing reactor coolant loop installation. Therefore it needs about twenty (20) months from the reactor vessel settings to the completion of the reactor vessel internal installation. The parallel installation methodology proposed in this study can reduce the construction period about two (2) months by installing reactor vessel internals in parallel with the welding process of the cross-over leg between the steam generator and the reactor coolant pump. ANSYS Codes was utilized to show the deformation impacts on the reactor vessel caused by the shrinkage force imposed by the welding process of the cross-over leg. The code analysis results lead the deformation impact is negligible. And it confirms the parallel installation of the reactor vessel internal with the cross-over leg can be applied for the OPR1000 construction. The economic improvement by the parallel installation was also

Sex and ancestry determine the free-running circadian period.

Science.gov (United States)

Eastman, Charmane I; Tomaka, Victoria A; Crowley, Stephanie J

2017-10-01

The endogenous, free-running circadian period (τ) determines the phase relationship that an organism assumes when entrained to the 24-h day. We found a shorter circadian period in African Americans compared to non-Hispanic European Americans (24.07 versus 24.33 h). We speculate that a short circadian period, closer to 24 h, was advantageous to humans living around the equator, but when humans migrated North out of Africa, where the photoperiod changes with seasons, natural selection favoured people with longer circadian periods. Recently, in evolutionary terms, immigrants came from Europe and Africa to America ('the New World'). The Europeans were descendents of people who had lived in Europe for thousands of years with changing photoperiods (and presumably longer periods), whereas Africans had ancestors who had always lived around the equator (with shorter periods). It may have been advantageous to have a longer circadian period while living in Europe early in the evolution of humans. In our modern world, however, it is better to have a shorter period, because it helps make our circadian rhythms earlier, which is adaptive in our early-bird-dominated society. European American women had a shorter circadian period than men (24.24 versus 24.41), but there was no sex difference in African Americans (24.07 for both men and women). We speculate that selection pressures in Europe made men develop a slightly longer period than women to help them track dawn which could be useful for hunters, but less important for women as gatherers. © 2017 The Authors. Journal of Sleep Research published by John Wiley & Sons Ltd on behalf of European Sleep Research Society.

Dam construction in salt rock

International Nuclear Information System (INIS)

Stockmann, N.; Beinlich, A.; Flach, D.; Jockwer, N.; Klarr, K.; Krogmann, P.; Miehe, R.; Schmidt, M.W.; Schwaegermann, H.F.; Walter, F.; Yaramanci, U.

1991-11-01

Barriers are a major component of the satefy concept for the Gorleben repository. The construction and performance of dams are currently tested within the framework of a project carried out in the Asse salt mine. A measuring programme has been established to give evidence of the sealing capacities of a barrier consisting of an abatement, long-term sealing material, and a hydraulic sealing system. Tests are to be made to verify the barrier's performance for shorter of long time periods (up to about 500 years). The tests are assisted by computed models established for the project. The long-term safety aspects to be studied include such conditions as permeability changes due to mechanical impacts, circulation conditions at the roadside, and the serviceable life and efficiency of the sealing components. (DG) [de

Prefabrication in Building Construction: A Perspective of Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Nafees Ahmed Memon

2014-07-01

Full Text Available Construction industry is facing many problems in terms of construction waste, quality, environment, durability, safety and higher construction cost. Adoption of prefabrication is a possible solution to such problems. Accordingly, there is a need to study the prospects that would stimulate the appropriate discussion of the suitability of prefabrication and other construction methods for concrete buildings. Therefore, this study investigates the significance of advantages in adopting prefabrication along with hindrances through questionnaire survey. The data has been analyzed using RIW (Relative Importance Weight method as a MCDM approach. The results depict that main advantages of prefabrication are ?Shorter construction time? and ?Less construction site waste?. The top hindrances in adopting prefabrication as identified in this study are: ?Higher initial construction cost? and ?Inflexible for design changes?. Based on the survey results and apparent progress in the adoption of prefabrication around the world, it is concluded that the use of prefabrication is likely to increase in developing countries like Pakistan

Prefabrication in building construction: a perspective of pakistan construction industry

International Nuclear Information System (INIS)

Memon, N.A.; Memon, F.A.; Khehro, S.H.

2014-01-01

Construction industry is facing many problems in terms of construction waste, quality, environment, durability, safety and higher construction cost. Adoption of prefabrication is a possible solution to such problems. Accordingly, there is a need to study the prospects that would stimulate the appropriate discussion of the suitability of prefabrication and other construction methods for concrete buildings. Therefore, this study investigates the significance of advantages in adopting prefabrication along with hindrances through questionnaire survey. The data has been analyzed using RIW (Relative Importance Weight) method as a MCDM approach. The results depict that main advantages of prefabrication are Shorter construction time and Less construction site waste. The top hindrances in adopting prefabrication as identified in this study are: Higher initial construction cost and Inflexible for design changes. Based on the survey results and apparent progress in the adoption of prefabrication around the world, it is concluded that the use of prefabrication is likely to increase in developing countries like Pakistan. (author)

Measuring single constructs by single items: Constructing an even shorter version of the "Short Five" personality inventory.

Directory of Open Access Journals (Sweden)

Kenn Konstabel

Full Text Available The aim of this study was to construct a short, 30-item personality questionnaire that would be, in terms of content and meaning of the scores, as comparable as possible with longer, well-established inventories such as NEO PI-R and its clones. To do this, we shortened the formerly constructed 60-item "Short Five" (S5 by half so that each subscale would be represented by a single item. We compared all possibilities of selecting 30 items (preserving balanced keying within each domain of the five-factor model in terms of correlations with well-established scales, self-peer correlations, and clarity of meaning, and selected an optimal combination for each domain. The resulting shortened questionnaire, XS5, was compared to the original S5 using data from student samples in 6 different countries (Estonia, Finland, UK, Germany, Spain, and China, and a representative Finnish sample. The correlations between XS5 domain scales and their longer counterparts from well-established scales ranged from 0.74 to 0.84; the difference from the equivalent correlations for full version of S5 or from meta-analytic short-term dependability coefficients of NEO PI-R was not large. In terms of prediction of external criteria (emotional experience and self-reported behaviours, there were no important differences between XS5, S5, and the longer well-established scales. Controlling for acquiescence did not improve the prediction of criteria, self-peer correlations, or correlations with longer scales, but it did improve internal reliability and, in some analyses, comparability of the principal component structure. XS5 can be recommended as an economic measure of the five-factor model of personality at the level of domain scales; it has reasonable psychometric properties, fair correlations with longer well-established scales, and it can predict emotional experience and self-reported behaviours no worse than S5. When subscales are essential, we would still recommend using the

Measuring single constructs by single items: Constructing an even shorter version of the “Short Five” personality inventory

Science.gov (United States)

Konstabel, Kenn; Lönnqvist, Jan-Erik; Leikas, Sointu; García Velázquez, Regina; Qin, Hiaying; Verkasalo, Markku; Walkowitz, Gari

2017-01-01

The aim of this study was to construct a short, 30-item personality questionnaire that would be, in terms of content and meaning of the scores, as comparable as possible with longer, well-established inventories such as NEO PI-R and its clones. To do this, we shortened the formerly constructed 60-item “Short Five” (S5) by half so that each subscale would be represented by a single item. We compared all possibilities of selecting 30 items (preserving balanced keying within each domain of the five-factor model) in terms of correlations with well-established scales, self-peer correlations, and clarity of meaning, and selected an optimal combination for each domain. The resulting shortened questionnaire, XS5, was compared to the original S5 using data from student samples in 6 different countries (Estonia, Finland, UK, Germany, Spain, and China), and a representative Finnish sample. The correlations between XS5 domain scales and their longer counterparts from well-established scales ranged from 0.74 to 0.84; the difference from the equivalent correlations for full version of S5 or from meta-analytic short-term dependability coefficients of NEO PI-R was not large. In terms of prediction of external criteria (emotional experience and self-reported behaviours), there were no important differences between XS5, S5, and the longer well-established scales. Controlling for acquiescence did not improve the prediction of criteria, self-peer correlations, or correlations with longer scales, but it did improve internal reliability and, in some analyses, comparability of the principal component structure. XS5 can be recommended as an economic measure of the five-factor model of personality at the level of domain scales; it has reasonable psychometric properties, fair correlations with longer well-established scales, and it can predict emotional experience and self-reported behaviours no worse than S5. When subscales are essential, we would still recommend using the full version

EVALUATION OF PRODUCTION IN SEASONALITY PERIODS: ANALYSIS OF THE CONSTRUCTION INDUSTRY IN BRAZIL

Directory of Open Access Journals (Sweden)

Marcos William Kaspchak Machado

2013-06-01

Full Text Available The present work has as an objective to evaluate the impacts of production seasonality in seasonality periods in the Brazilian construction industry. The adopted methodology was based on the qualitative and quantitative approaches of the aspects inherent to the seasonality factors in the construction industry and its possible causes. Besides that, literature data were collected in year report books and devices provided by institutions of the sector. The results demonstrated the importance of production management mechanisms to optimize the use of productive factors through cost analysis, which are fundamental to understand the operational flux of resources used in the operational media. Obtaining this information, connected to market indicators helped in the decision making process related to the development of prospective scenarios which will give support to the decision making strategy aiming to stabilize the production levels.

Towards shorter wavelength x-ray lasers using a high power, short pulse pump laser

International Nuclear Information System (INIS)

Tighe, W.; Krushelnick, K.; Valeo, E.; Suckewer, S.

1991-05-01

A near-terawatt, KrF* laser system, focussable to power densities >10 18 W/cm 2 has been constructed for use as a pump laser in various schemes aimed at the development of x-ray lasing below 5nm. The laser system along with output characteristics such as the pulse duration, the focal spot size, and the percentage of amplified spontaneous emission (ASE) emitted along with the laser pulse will be presented. Schemes intended to lead to shorter wavelength x-ray emission will be described. The resultant requirements on the pump laser characteristics and the target design will be outlined. Results from recent solid target experiments and two-laser experiments, showing the interaction of a high-power, short pulse laser with a preformed plasma, will be presented. 13 refs., 5 figs

Extending 3D near-cloud corrections from shorter to longer wavelengths

International Nuclear Information System (INIS)

Marshak, Alexander; Evans, K. Frank; Várnai, Tamás; Wen, Guoyong

2014-01-01

Satellite observations have shown a positive correlation between cloud amount and aerosol optical thickness (AOT) that can be explained by the humidification of aerosols near clouds, and/or by cloud contamination by sub-pixel size clouds and the cloud adjacency effect. The last effect may substantially increase reflected radiation in cloud-free columns, leading to overestimates in the retrieved AOT. For clear-sky areas near boundary layer clouds the main contribution to the enhancement of clear sky reflectance at shorter wavelengths comes from the radiation scattered into clear areas by clouds and then scattered to the sensor by air molecules. Because of the wavelength dependence of air molecule scattering, this process leads to a larger reflectance increase at shorter wavelengths, and can be corrected using a simple two-layer model [18]. However, correcting only for molecular scattering skews spectral properties of the retrieved AOT. Kassianov and Ovtchinnikov [9] proposed a technique that uses spectral reflectance ratios to retrieve AOT in the vicinity of clouds; they assumed that the cloud adjacency effect influences the spectral ratio between reflectances at two wavelengths less than it influences the reflectances themselves. This paper combines the two approaches: It assumes that the 3D correction for the shortest wavelength is known with some uncertainties, and then it estimates the 3D correction for longer wavelengths using a modified ratio method. The new approach is tested with 3D radiances simulated for 26 cumulus fields from Large-Eddy Simulations, supplemented with 40 aerosol profiles. The results showed that (i) for a variety of cumulus cloud scenes and aerosol profiles over ocean the 3D correction due to cloud adjacency effect can be extended from shorter to longer wavelengths and (ii) the 3D corrections for longer wavelengths are not very sensitive to unbiased random uncertainties in the 3D corrections at shorter wavelengths. - Highlights: �

The aeration period of a model nuclear waste repository

International Nuclear Information System (INIS)

Sharland, S.M.; Tasker, P.W.

1987-02-01

We have constructed a model of the evolution of oxygen in a cement backfill which includes both its depletion through the canister corrosion reactions and its migration in the cement pores. The results indicate that the duration in which mild steel waste canisters may be subject to localised corrosion is very much shorter than the intended lifetime of the repository components, provided there is no external source of oxygen. For canisters spaced 1.2m apart, the model predicts a maximum aeration period of approximately 65 years, assuming high oxygen content and diffusivity in the backfill and low leakage current on the canisters (0.01 μA cm -2 ). In such a case a reducing environment is established throughout the backfill within this period. Under conditions of more restricted oxygen transport, reducing conditions are still established within a relatively short time in the immediate vicinity of the canisters, but the oxidation potential elsewhere in the backfill is then controlled by the uniform corrosion rate of the canisters. (author)

TOPS On-Line: Automating the Construction and Maintenance of HTML Pages

Science.gov (United States)

Jones, Kennie H.

1994-01-01

After the Technology Opportunities Showcase (TOPS), in October, 1993, Langley Research Center's (LaRC) Information Systems Division (ISD) accepted the challenge to preserve the investment in information assembled in the TOPS exhibits by establishing a data base. Following the lead of several people at LaRC and others around the world, the HyperText Transport Protocol (HTTP) server and Mosaic were the obvious tools of choice for implementation. Initially, some TOPS exhibitors began the conventional approach of constructing HyperText Markup Language (HTML) pages of their exhibits as input to Mosaic. Considering the number of pages to construct, a better approach was conceived that would automate the construction of pages. This approach allowed completion of the data base construction in a shorter period of time using fewer resources than would have been possible with the conventional approach. It also provided flexibility for the maintenance and enhancement of the data base. Since that time, this approach has been used to automate construction of other HTML data bases. Through these experiences, it is concluded that the most effective use of the HTTP/Mosaic technology will require better tools and techniques for creating, maintaining and managing the HTML pages. The development and use of these tools and techniques are the subject of this document.

A shorter and more specific oral sensitization-based experimental model of food allergy in mice.

Science.gov (United States)

Bailón, Elvira; Cueto-Sola, Margarita; Utrilla, Pilar; Rodríguez-Ruiz, Judith; Garrido-Mesa, Natividad; Zarzuelo, Antonio; Xaus, Jordi; Gálvez, Julio; Comalada, Mònica

2012-07-31

Cow's milk protein allergy (CMPA) is one of the most prevalent human food-borne allergies, particularly in children. Experimental animal models have become critical tools with which to perform research on new therapeutic approaches and on the molecular mechanisms involved. However, oral food allergen sensitization in mice requires several weeks and is usually associated with unspecific immune responses. To overcome these inconveniences, we have developed a new food allergy model that takes only two weeks while retaining the main characters of allergic response to food antigens. The new model is characterized by oral sensitization of weaned Balb/c mice with 5 doses of purified cow's milk protein (CMP) plus cholera toxin (CT) for only two weeks and posterior challenge with an intraperitoneal administration of the allergen at the end of the sensitization period. In parallel, we studied a conventional protocol that lasts for seven weeks, and also the non-specific effects exerted by CT in both protocols. The shorter protocol achieves a similar clinical score as the original food allergy model without macroscopically affecting gut morphology or physiology. Moreover, the shorter protocol caused an increased IL-4 production and a more selective antigen-specific IgG1 response. Finally, the extended CT administration during the sensitization period of the conventional protocol is responsible for the exacerbated immune response observed in that model. Therefore, the new model presented here allows a reduction not only in experimental time but also in the number of animals required per experiment while maintaining the features of conventional allergy models. We propose that the new protocol reported will contribute to advancing allergy research. Copyright © 2012 Elsevier B.V. All rights reserved.

Engineered barrier construction in salt rock. Final report of project phase 2. Period covered: 1 July 1989 - 31 December 1992

International Nuclear Information System (INIS)

Stockmann, N.; Beinlich, A.; Droste, J.; Flach, D.; Glaess, F.; Jockwer, N.; Krogmann, P.; Miehe, R.; Moeller, J.; Schwaegermann, F.; Wallmueller, R.; Walter, F.; Yaramanci, U.

1994-01-01

The project report presents and explains data obtained by a specific measuring programme, giving evidence of the sealing efficiency of an engineered barrier comprising abutment, long-term barrier, and hydraulic short-term barrier, the sealing performance having been verified for shorter and longer periods of time ( up to approx. 500 years). Specific computer codes have been applied for computing and verifying the long-term efficiency of the complex engineered barrier system (artificial structures and surrounding rock). The technical feasibility and the performance of an engineered barrier for reliable sealing of a radwaste repository is thus demonstrated at a scale of 1:1 at the site of the Asse mine [de

Shorter height is related to lower cardiovascular disease risk – A narrative review

Directory of Open Access Journals (Sweden)

Thomas T. Samaras

2013-01-01

Full Text Available Numerous Western studies have shown a negative correlation between height and cardiovascular disease. However, these correlations do not prove causation. This review provides a variety of studies showing short people have little to no cardiovascular disease. When shorter people are compared to taller people, a number of biological mechanisms evolve favoring shorter people, including reduced telomere shortening, lower atrial fibrillation, higher heart pumping efficiency, lower DNA damage, lower risk of blood clots, lower left ventricular hypertrophy and superior blood parameters. The causes of increased heart disease among shorter people in the developed world are related to lower income, excessive weight, poor diet, lifestyle factors, catch-up growth, childhood illness and poor environmental conditions. For short people in developed countries, the data indicate that a plant-based diet, leanness and regular exercise can substantially reduce the risk of cardiovascular disease.

LULA VS ALCKMIN: DISCURSIVE CONSTRUCTIONS OF THE VEJA PERIODIC

Directory of Open Access Journals (Sweden)

Cicília de Sousa Frazão

2009-08-01

Full Text Available This work is carried out an analysis of the cover of the 1980 edition of the magazine Veja, published on November 01, 2006, in the election campaign of 2006 – second round, focusing on the image of President Luiz Inácio Lula da Silva and Geraldo Alckmin. Try to understand the imagetic and verbal speech expressed in covers and its constraints on social and discursive formation, through the investigations of the mechanisms of construction of the iconic and verbal text and reveal the effects of meaning constructed in covers. Based on a theoretical support, to seek to understand of how the effect depends on the codes produced by a culture and how they are mobilized by the media to construct or deconstruct a politician´s image facing society

Urdu translation and validation of shorter version of Positive Affect and Negative Affect Schedule (PANAS) on Pakistani bank employees.

Science.gov (United States)

Akhter, Noreen

2017-10-01

To translate, adapt and validate shorter version of positive affect and negative affect scale on Pakistani corporate employees. This cross-sectional study was conducted in the twin cities of Islamabad and Rawalpindi from October 2014 to December 2015. The study was completed into two independent parts. In part one, the scale was translated by forward translation. Then it was pilot-tested and administered on customer services employees from commercial banks and the telecommunication sector. Data of the pilot study was analysed by using exploratory factor analysis to extract the initial factor of positive affect and negative affect scale. Part two comprised the main study. Commercial bank employees were included in the sample using convenient sampling technique. Data of the main study was analysed using confirmatory factor analysis in order to establish construct validity of positive affect and negative affect scale. There were145 participants in the first part of the study and 495 in the second. Results of confirmatory factor analysis confirmed the two-factor structure of positive affect and negative affect scale suggesting that the scale has two distinct domains, i.e. positive affect and negative affect. The shorter version of positive affect and negative affect scale was found to be a valid and reliable measure.

Construction time of PWRs

International Nuclear Information System (INIS)

Moreira, João M.L.; Gallinaro, Bruno; Carajilescov, Pedro

2013-01-01

The construction time of PWRs is studied considering published data about nuclear power plants in the world. For the 268 PWRs in operation in 2010, the mode of the construction time distribution is around 5–6 years, and 80% of the plants were built in less than 120 months. To circumvent the problem of comparing plants with different size we normalized the construction time to plants with 1 GW. We restricted the analysis to 201 PWRs which suffered less from external factors that were beyond the control of the management from 1965 to 2010. The results showed that the normalized construction time did not increase over the years and nor with the plants’ gross power level. The learning rate of the industry regarding normalized construction times showed a reduction with 95% confidence level of about 0.56±0.07 months for each 10 GW of installed capacity. Over the years the normalized construction time decreased and became more predictable. The data showed that countries with more centralized regulatory, construction and operation environments were able to build PWRs in shorter times. Countries less experienced with the nuclear technology built PWRs in longer times. - Highlights: ► The construction time of PWRs is analyzed based on historical data. ► Different factors affecting construction time are considered in the analyses. ► The normalized construction time of PWRs decreased with time and gross power level. ► Countries with more centralized institutions built PWRs more quickly

Study of building typology of school constructed during the Dutch Colonial Period in Indonesia. Case study of Hoogere Burgerschool (HBS) in Bandung

Science.gov (United States)

Sarwo Wibowo, Arif

2018-03-01

Bandung is one of the most important colonial cities in Indonesia. In the early 20th century the capital city of Dutch East-Indies Government planned to move in Bandung. Critical infrastructures were intensively built during that period, such as streets and railways, houses, governmental buildings, train stations, hospitals and educational facilities. Besides the famous campus of Technische Hoogeschool te Bandoeng (ITB), still in the same period, several schools were also constructed. One of the most important schools was Hoogere Burgerschool in Bandung (HBS Bandung), now SMUN 3 and 5, Bandung designed by Charles Prosper Wolff Schoemaker and constructed in 1915. HBS Bandung was the fourth HBS constructed by Dutch East Indies Government, therefore became important and put itself as a reference for the later school buildings in Bandung. This study is analyzing how the architects’ frame of mind in producing this design works. Survey and direct data collecting were used to take the exact embodiment of building design. Usage and functional analysis were also used to match space and other standard used in a school building at that time. This study will give an understanding of building typology of school during the Dutch Colonial Period in Indonesia.

Prenatal paracetamol exposure is associated with shorter anogenital distance in male infants

Science.gov (United States)

Fisher, B.G.; Thankamony, A.; Hughes, I.A.; Ong, K.K.; Dunger, D.B.; Acerini, C.L.

2016-01-01

STUDY QUESTION What is the relationship between maternal paracetamol intake during the masculinisation programming window (MPW, 8–14 weeks of gestation) and male infant anogenital distance (AGD), a biomarker for androgen action during the MPW? SUMMARY ANSWER Intrauterine paracetamol exposure during 8–14 weeks of gestation is associated with shorter AGD from birth to 24 months of age. WHAT IS ALREADY KNOWN The increasing prevalence of male reproductive disorders may reflect environmental influences on foetal testicular development during the MPW. Animal and human xenograft studies have demonstrated that paracetamol reduces foetal testicular testosterone production, consistent with reported epidemiological associations between prenatal paracetamol exposure and cryptorchidism. STUDY DESIGN, SIZE, DURATION Prospective cohort study (Cambridge Baby Growth Study), with recruitment of pregnant women at ~12 post-menstrual weeks of gestation from a single UK maternity unit between 2001 and 2009, and 24 months of infant follow-up. Of 2229 recruited women, 1640 continued with the infancy study after delivery, of whom 676 delivered male infants and completed a medicine consumption questionnaire. PARTICIPANTS/MATERIALS, SETTING, METHOD Mothers self-reported medicine consumption during pregnancy by a questionnaire administered during the perinatal period. Infant AGD (measured from 2006 onwards), penile length and testicular descent were assessed at 0, 3, 12, 18 and 24 months of age, and age-specific Z scores were calculated. Associations between paracetamol intake during three gestational periods (14 weeks) and these outcomes were tested by linear mixed models. Two hundred and twenty-five (33%) of six hundred and eighty-one male infants were exposed to paracetamol during pregnancy, of whom sixty-eight were reported to be exposed during 8–14 weeks. AGD measurements were available for 434 male infants. MAIN RESULTS AND THE ROLE OF CHANCE Paracetamol exposure during 8–14

SHORTER MENSTRUAL CYCLES ASSOCIATED WITH CHLORINATION BY-PRODUCTS IN DRINKING WATER

Science.gov (United States)

Shorter Menstrual Cycles Associated with Chlorination by-Products in Drinking Water. Gayle Windham, Kirsten Waller, Meredith Anderson, Laura Fenster, Pauline Mendola, Shanna Swan. California Department of Health Services.In previous studies of tap water consumption we...

From Periodic Properties to a Periodic Table Arrangement

Science.gov (United States)

Besalú, Emili

2013-01-01

A periodic table is constructed from the consideration of periodic properties and the application of the principal components analysis technique. This procedure is useful for objects classification and data reduction and has been used in the field of chemistry for many applications, such as lanthanides, molecules, or conformers classification.…

YAOPBM-II: extension to higher degrees and to shorter time series

Energy Technology Data Exchange (ETDEWEB)

Korzennik, S G [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (United States)], E-mail: skorzennik@cfa.harvard.edu

2008-10-15

In 2005, I presented a new fitting methodology (Yet AnOther Peak Bagging Method -YAOPBM), derived for very-long time series (2088-day-long) and applied it to low degree modes, {iota} {<=} 25. That very-long time series was also sub-divided into shorter segments (728-day-long) that were each fitted over the same range of degrees, to estimate changes with solar activity levels. I present here the extension of this method in several 'directions': a) to substantially higher degrees ({iota} {<=} 125); b) to shorter time series (364- and 182-day-long); and c) to additional 728-day-long segments, covering now some 10 years of observations. I discuss issues with the fitting, namely the leakage matrix, and the f- and p1 mode at very low frequencies, and I present some of the characteristics of the observed temporal changes.

Socio-Economic Problems of the Russian Construction of Art Nouveau Period (on the Example of A.I. Lishnevsky’s Activity

Directory of Open Access Journals (Sweden)

Aleksandr I. Chepel

2017-09-01

Full Text Available The author studies the specifics of Russian architect’s work on the example of the activity of prominent architect of Art Nouveau period A.L. Lishnevsky (1868–1942. The special attention is paid to the architect’s relations with the authorities, contractors and workers, as well as with customers and colleagues. The author shows the opinion of citizens about the activities of an architect as a builder and businessman, reveals the main socio-economic problems which the architect faced from the moment of inception and approval of the project prior to its actual implementation. The author attempts to trace the mechanism of professional networking in the architecture environment of that time, and to reveal the peculiarities of private architectural bureaus (“offices”. The attention is paid to the assessment by the architect of their own professional activity. A.L. Lishnevsky’s activity is a good example of architect’s work in the construction business. A native of the city of Kherson, he received the metropolitan education at the Art Academy, then for over six years (1895–1901 he worked as a municipal architect in Elisavetgrad (Kirovograd, since 2016 – Kropivnytsky during the period of rapid economic and cultural growth of the town. After 1901 and up to 1917 he was actively engaged in municipal and private construction in the capital of the Russian Empire, Saint Petersburg. The relevance of the topic is determined by the fact that the Art Nouveau period architect worked in capitalism construction market, and was forced to deal with issues similar to those that the architects of our time solve. The study is based on materials from Russian archives and periodicals of late 19th – early 20th century.

The Glycated Albumin (GA) to HbA1c Ratio Reflects Shorter-Term Glycemic Control than GA: Analysis of Patients with Fulminant Type 1 Diabetes.

Science.gov (United States)

Koga, Masafumi; Inada, Shinya; Nakao, Taisei; Kawamori, Ryuzo; Kasayama, Soji

2017-01-01

Glycated albumin (GA) reflects shorter-term glycemic control than HbA1c. We have reported that HbA1c is paradoxically increased in diabetic patients whose glycemic control deteriorated before ameliorating. In this study, we analyzed paradoxical increases of glycemic control indicators after treatment in patients with fulminant type 1 diabetes (FT1D). We also investigated whether the GA/HbA1c ratio may reflect shorter-term glycemic control than GA. Five FT1D patients whose post-treatment HbA1c and GA levels were measured were enrolled. We also used a formula to estimate HbA1c and GA from the fictitious models of changes in plasma glucose in FT1D patients. In this model, the periods during which HbA1c, GA, and the GA/HbA1c ratio were higher than at the first visit were compared. In addition, the half-life for the GA/HbA1c ratio was calculated in accordance with the half-lives for HbA1c and GA (36 and 14 days, respectively). In all FT1D patients, HbA1c levels 2-4 weeks after treatment were increased, with three patients (60%) experiencing an increase of GA levels. In contrast, an increase of the GA/HbA1c ratio was observed in only one patient. In all of the different models of changes in plasma glucose in FT1D patients, the length of time during which the values were higher than at the first visit was in the order of HbA1c > GA > GA/HbA1c ratio. The half-life for the GA/HbA1c ratio was 9 days, shorter than GA. These findings suggest that the GA/HbA1c ratio reflects shorter-term glycemic control than GA. © 2016 Wiley Periodicals, Inc.

Construction of 2D quasi-periodic Rauzy tiling by similarity transformation

International Nuclear Information System (INIS)

Zhuravlev, V. G.; Maleev, A. V.

2009-01-01

A new approach to constructing self-similar fractal tilings is proposed based on the construction of semigroups generated by a finite set of similarity transformations. The Rauzy tiling-a 2D analog of 1D Fibonacci tiling generated by the golden mean-is used as an example to illustrate this approach. It is shown that the Rauzy torus development and the elementary fractal boundary of Rauzy tiling can be constructed in the form of a set of centers of similarity semigroups generated by two and three similarity transformations, respectively. A centrosymmetric tiling, locally dual to the Rauzy tiling, is constructed for the first time and its parameterization is developed.

Smoking Topography among Korean Smokers: Intensive Smoking Behavior with Larger Puff Volume and Shorter Interpuff Interval.

Science.gov (United States)

Kim, Sungroul; Yu, Sol

2018-05-18

The difference of smoker's topography has been found to be a function many factors, including sex, personality, nicotine yield, cigarette type (i.e., flavored versus non-flavored) and ethnicity. We evaluated the puffing behaviors of Korean smokers and its association with smoking-related biomarker levels. A sample of 300 participants was randomly recruited from metropolitan areas in South Korea. Topography measures during a 24-hour period were obtained using a CReSS pocket device. Korean male smokers smoked two puffs less per cigarette compared to female smokers (15.0 (13.0⁻19.0) vs. 17.5 (15.0⁻21.0) as the median (Interquartile range)), but had a significantly larger puff volume (62.7 (52.7⁻75.5) mL vs. 53.5 (42.0⁻64.2) mL); p = 0.012). The interpuff interval was similar between men and women (8.9 (6.5⁻11.2) s vs. 8.3 (6.2⁻11.0) s; p = 0.122) but much shorter than other study results. A dose-response association ( p = 0.0011) was observed between daily total puff volumes and urinary cotinine concentrations, after controlling for sex, age, household income level and nicotine addiction level. An understanding of the difference of topography measures, particularly the larger puff volume and shorter interpuff interval of Korean smokers, may help to overcome a potential underestimation of internal doses of hazardous byproducts of smoking.

Construction and properties of a topological index for periodically driven time-reversal invariant 2D crystals

Directory of Open Access Journals (Sweden)

D. Carpentier

2015-07-01

Full Text Available We present mathematical details of the construction of a topological invariant for periodically driven two-dimensional lattice systems with time-reversal symmetry and quasienergy gaps, which was proposed recently by some of us. The invariant is represented by a gap-dependent Z2-valued index that is simply related to the Kane–Mele invariants of quasienergy bands but contains an extra information. As a byproduct, we prove new expressions for the two-dimensional Kane–Mele invariant relating the latter to Wess–Zumino amplitudes and the boundary gauge anomaly.

Hitachi's experience and achievements in ABWR construction

International Nuclear Information System (INIS)

Inoue, Takashi; Miura, Jun; Murayama, Kouichi

2003-01-01

Hitachi, Ltd. (Hitachi) is taking charge of the turbine island of Chubu Electric Power Company's Hamaoka nuclear power plant Unit No. 5 (Hamaoka 5), and all facilities of Hokuriku Electric Power Company's Shika Nuclear Power Station Unit No. 2 (Shika 2). Hitachi has achieved shorter schedules and lower costs in the two projects with the following construction methods. First, Hitachi applied modularization and the area-by-area method. These methods enable us to undertake building and installation work in parallel. Second, the floor packaging construction method enables us to finish installation in every area earlier than conventional methods. Moreover, manpower can be distributed evenly. This paper reports the application of these advanced construction methods to the Hamaoka 5 and Shika 2 projects. Installations such as RCCV modules and condenser blocks are presented in this paper. In addition, Hitachi is using 3D-CAD engineering and our own construction management system to optimize the planning of construction procedures and the installation of equipment in these projects. Thus Hitachi is always striving to improve the reliability, safety and economy of ABWR construction technologies. (author)

Distinct functions of Period2 and Period3 in the mouse circadian system revealed by in vitro analysis.

Directory of Open Access Journals (Sweden)

Julie S Pendergast

2010-01-01

Full Text Available The mammalian circadian system, which is composed of a master pacemaker in the suprachiasmatic nuclei (SCN as well as other oscillators in the brain and peripheral tissues, controls daily rhythms of behavior and physiology. Lesions of the SCN abolish circadian rhythms of locomotor activity and transplants of fetal SCN tissue restore rhythmic behavior with the periodicity of the donor's genotype, suggesting that the SCN determines the period of the circadian behavioral rhythm. According to the model of timekeeping in the SCN, the Period (Per genes are important elements of the transcriptional/translational feedback loops that generate the endogenous circadian rhythm. Previous studies have investigated the functions of the Per genes by examining locomotor activity in mice lacking functional PERIOD proteins. Variable behavioral phenotypes were observed depending on the line and genetic background of the mice. In the current study we assessed both wheel-running activity and Per1-promoter-driven luciferase expression (Per1-luc in cultured SCN, pituitary, and lung explants from Per2(-/- and Per3(-/- mice congenic with the C57BL/6J strain. We found that the Per2(-/- phenotype is enhanced in vitro compared to in vivo, such that the period of Per1-luc expression in Per2(-/- SCN explants is 1.5 hours shorter than in Per2+/+ SCN, while the free-running period of wheel-running activity is only 11 minutes shorter in Per2(-/- compared to Per2+/+ mice. In contrast, circadian rhythms in SCN explants from Per3(-/- mice do not differ from Per3+/+ mice. Instead, the period and phase of Per1-luc expression are significantly altered in Per3(-/- pituitary and lung explants compared to Per3+/+ mice. Taken together these data suggest that the function of each Per gene may differ between tissues. Per2 appears to be important for period determination in the SCN, while Per3 participates in timekeeping in the pituitary and lung.

HITACHI construction CAE system

International Nuclear Information System (INIS)

Yoshida, M.

1994-01-01

Construction and maintenance of nuclear power plants have important problems such as shortening the construction period and reducing the construction cost. Recently, the problem of insufficient construction labor has arisen, and as drastic strategic development has become a necessary counter-measure. The following four principles are included in the measures to be taken for efficient execution of the construction work within the short construction period: (1) reduction of on-site work and expansion of module block making, (2)improvement of the accuracy of the on-site work process, adjustment and expansion of the work in parallel with the construction process, (3)improvement of efficiency of the on-site work and mechanization and automation of the work, (4)improvement of the accuracy of the management of the construction. A three dimensional simulation system plant construction plan CAE, comprising five modules has been developed. A project management system was also developed to improve the accuracy and efficiency of management work in the field

Industrial Disputes in the Construction Sector

Directory of Open Access Journals (Sweden)

L.J Perry

2012-11-01

Full Text Available The Cole Royal Commission enquiry into the building and construction (abbreviated to ‘construction’ sector recommended controversial workplace-relation reforms for that sector. The recommended changes are likely to be enshrined in legislation within the year. The Commission drew on analyses of industrial disputes that focused, in the main, on quite recent experience. This paper attempts to give a broader historical perspective on disputes in that sector by considering the pattern of disputes for the entire post-World War II period. Accordingly, data on disputes and employees during the entire period are gathered from Australian Bureau of Statistics current and archived sources. These data are classified according to sector (construction versus non-construction and analysed. It is found that the strike rate has, on average, been greater in the construction sector than in the non-construction sector. However, there have been periods during which disputes in the construction sector have been relatively low. The most recent period was during the period of the Accord (1983-96, during which the strike rate in the construction sector fell relatively strongly. The analysis of this relatively broad historical period draws attention, among other things, to the possibility that the sort of strategies employed during the Accord years – strategies of cooperation and consensus building – may provide a more effective means of bringing industrial peace to the workplace relations scene of the construction sector than policies that are relatively confrontational.

USAID Construction Assessment

Data.gov (United States)

US Agency for International Development — The USAID construction assessment is a survey of the character, scope, value and management of construction activities supported by USAID during the period from June...

A Production Model for Construction: A Theoretical Framework

Directory of Open Access Journals (Sweden)

Ricardo Antunes

2015-03-01

Full Text Available The building construction industry faces challenges, such as increasing project complexity and scope requirements, but shorter deadlines. Additionally, economic uncertainty and rising business competition with a subsequent decrease in profit margins for the industry demands the development of new approaches to construction management. However, the building construction sector relies on practices based on intuition and experience, overlooking the dynamics of its production system. Furthermore, researchers maintain that the construction industry has no history of the application of mathematical approaches to model and manage production. Much work has been carried out on how manufacturing practices apply to construction projects, mostly lean principles. Nevertheless, there has been little research to understand the fundamental mechanisms of production in construction. This study develops an in-depth literature review to examine the existing knowledge about production models and their characteristics in order to establish a foundation for dynamic production systems management in construction. As a result, a theoretical framework is proposed, which will be instrumental in the future development of mathematical production models aimed at predicting the performance and behaviour of dynamic project-based systems in construction.

Implications of shorter cells in PEP

International Nuclear Information System (INIS)

Wiedemann, H.

1975-01-01

Further studies on the beam-stay-clear requirements in PEP led to the conclusion that the vertical aperture needed to be enlarged. There are two main reasons for that: Observations at SPEAR indicate that the aperture should be large enough for a fully coupled beam. Full coupling of the horizontal and vertical betatron oscillations occurs not only occasionally when the energy, tune or betatron function at the interaction point is changed but also due to the beam/endash/beam effect of two strong colliding beams. The second reason for an increased aperture requirement is the nonlinear perturbation of the particle trajectories by the sextupoles. This perturbation increases a fully coupled beam by another 50% to 80%. Both effects together with a +-5 mm allowance for closed orbit perturbation result in a vertical beam-stay-clear in the bending magnets of +-4.8 to +-5.6 cm, compared to the present +-2.0 cm. This beam-stay-clear, together with additional space for vacuum chamber, etc., leads to very costly bending magnets. In this note, a shorter cell length is proposed which would reduce considerably the vertical beam-stay-clear requirements in the bending magnets. 7 figs

Constructability - from Qinshan to the ACR

International Nuclear Information System (INIS)

Elgohary, M.; Fairclough, N.; Ricciuti, R.

2003-01-01

AECL has recognised the importance of Constructability for many years and is applying its principals to CANDU projects with increasing success. Constructability is defined as the consideration of construction knowledge and experience during all phases of a project, and recognizes that maximum benefit can be achieved during the concept phases of a project. The CANDU 6 Nuclear Power Plant has been constructed eleven times in the last 25 years, however, the last two units being completed on the Qinshan project in China have employed some very innovative construction methods that have not been used on the previous units. In order to make nuclear power generation more competitive, shorter construction schedules and reduced project costs and risks are essential objectives. The application of constructability principles is a major contributor to achieving these objectives. The success of Qinshan has increased the confidence in the new construction methods which are being implemented on the ACR (Advanced CANDU Reactor) successfully. An ACR construction strategy that utilizes advanced construction techniques has been developed by AECL. The strategy includes paralleling of activities by using extensive modularization and the vertical installation of equipment and modules into the reactor building, using a VHL (Very Heavy Lift) crane. This strategy allows short schedules to be met with a minimum risk to the project. This paper describes the latest construction methods used successfully on the Qinshan CANDU 6 project and looks at the extensive implementation of similar methods for ACR. It is concluded, based on the Qinshan success, that the ACR construction schedule is readily achievable. (author)

One long chain among shorter chains : the Flory approach revisited

OpenAIRE

Raphaël , E.; Fredrickson , G.; Pincus , P.

1992-01-01

We consider the mean square end-to-end distance of a long chain immersed in a monodisperse, concentrated solution of shorter, chemically identical chains. In contrast with the earlier work of Flory, no simplifying assumption on the wave vector dependence of the effective potential between segments is made. In order to obtain a closed form expression for the dimension of the long chain, we first derive a general expression for the mean square end-to-end distance of a flexible chain with arbitr...

Human Resource Construction

Institute of Scientific and Technical Information of China (English)

2015-01-01

Centering on strategic objective of reform and development,CIAE formulated its objectives in human resource construction for the 13th Five-year Plan period,and achieved new apparent progress in human resource construction in 2015.1 Implementation of"LONGMA Project"

Micropole Undulators In Synchrotron Radiation Technology: Design And Construction Of A Submillimeter Period Prototype With A 3 Kilogauss Peak Field At SSRL

Science.gov (United States)

Tatchyn, Roman; Csonka, Paul

1986-01-01

The availability of undulators with submillimeter periods will profoundly affect the future development of soft x-ray sources and their attendant instrumentation. Outputs comparable to those of present-day conventional undulators, obtainable with much lower energy storage rings, is only one promising aspect of such devices. This paper critically examines some of the future prospects of such devices and describes the design and practical construction of a 1" long prototype consisting of 35 periods. A proposed experiment to test this device on a linac is described.

Micropole undulators in synchrotron radiation technology: Design and construction of a submillimeter period prototype with a 3 kilogauss peak field at SSRL

International Nuclear Information System (INIS)

Tatchyn, R.; Csonka, P.

1987-01-01

The availability of undulators with submillimeter periods profoundly affects the future development of soft x-ray sources and their attendant instrumentation. Outputs comparable to those of present-day conventional undulators, obtainable with much lower energy storage rings, is only one promising aspect of such devices. This paper critically examines some of the future prospects of such devices and describes the design and practical construction of a 1'' long prototype consisting of 35 periods. A proposed experiment to test this device on a linac is described

Physical activity during video capsule endoscopy correlates with shorter bowel transit time.

Science.gov (United States)

Stanich, Peter P; Peck, Joshua; Murphy, Christopher; Porter, Kyle M; Meyer, Marty M

2017-09-01

 Video capsule endoscopy (VCE) is limited by reliance on bowel motility for propulsion, and lack of physical activity has been proposed as a cause of incomplete studies. Our aim was to prospectively investigate the association between physical activity and VCE bowel transit.  Ambulatory outpatients receiving VCE were eligible for the study. A pedometer was attached at the time of VCE ingestion and step count was recorded at the end of the procedure. VCE completion was assessed by logistic regression models, which included step count (500 steps as one unit). Total transit time was analyzed by Cox proportional hazards models. The hazard ratios (HR) with 95 % confidence interval (CI) indicated the "hazard" of completion, such that HRs > 1 indicated a reduced transit time.  A total of 100 patients were included. VCE was completed in 93 patients (93 %). The median step count was 2782 steps. Step count was not significantly associated with VCE completion (odds ratio 1.45, 95 %CI 0.84, 2.49). Pedometer step count was significantly associated with shorter total, gastric, and small-bowel transit times (HR 1.09, 95 %CI 1.03, 1.16; HR 1.05, 95 %CI 1.00, 1.11; HR 1.07, 95 %CI 1.01, 1.14, respectively). Higher body mass index (BMI) was significantly associated with VCE completion (HR 1.87, 95 %CI 1.18, 2.97) and shorter bowel transit times (HR 1.05, 95 %CI 1.02, 1.08).  Increased physical activity during outpatient VCE was associated with shorter bowel transit times but not with study completion. In addition, BMI was a previously unreported clinical characteristic associated with VCE completion and should be included as a variable of interest in future studies.

Abnormal arrangement of a collagen/apatite extracellular matrix orthogonal to osteoblast alignment is constructed by a nanoscale periodic surface structure.

Science.gov (United States)

Matsugaki, Aira; Aramoto, Gento; Ninomiya, Takafumi; Sawada, Hiroshi; Hata, Satoshi; Nakano, Takayoshi

2015-01-01

Morphological and directional alteration of cells is essential for structurally appropriate construction of tissues and organs. In particular, osteoblast alignment is crucial for the realization of anisotropic bone tissue microstructure. In this article, the orientation of a collagen/apatite extracellular matrix (ECM) was established by controlling osteoblast alignment using a surface geometry with nanometer-sized periodicity induced by laser ablation. Laser irradiation induced self-organized periodic structures (laser-induced periodic surface structures; LIPSS) with a spatial period equal to the wavelength of the incident laser on the surface of biomedical alloys of Ti-6Al-4V and Co-Cr-Mo. Osteoblast orientation was successfully induced parallel to the grating structure. Notably, both the fibrous orientation of the secreted collagen matrix and the c-axis of the produced apatite crystals were orientated orthogonal to the cell direction. To the best of our knowledge, this is the first report demonstrating that bone tissue anisotropy is controllable, including the characteristic organization of a collagen/apatite composite orthogonal to the osteoblast orientation, by controlling the cell alignment using periodic surface geometry. Copyright © 2014 Elsevier Ltd. All rights reserved.

Digital Technology for Construction Period Reduction of Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

You, Y. M. [PHILOSOPHIA, Inc., Seoul (Korea, Republic of); Suh, K. Y. [Seoul National Univ., Seoul (Korea, Republic of)

2009-10-15

PHILOSOPHIA, Inc. and Seoul National University have jointly developed a first-of-a-kind engineering (FOAKE) solution. The solution lends itself to the four-plus-dimensional (4{sup +}D) Technology{sup TM} resorting to three -dimensional (3D) computer-aided design (CAD) digital mockup (DMU). The aim is to minimize the working hours via process optimization by real-time exchange of design and process information in the ubiquitous system. The 4{sup +}D Technology{sup TM} in the 3D virtual reality (VR) space and time plus cost coordinates, is developed to reduce the construction time as well as cost of nuclear power plants (NPPs) by optimizing the manufacturing procedure and construction process. The 4{sup +}D Technology{sup TM} anchored to the 3D CAD DMU allows the interference of the NPP components to be checked upon early in the design stage, and the process sequences to be optimized. Moreover, its ergonomic and robotic technologies enable simulation of all the aspects of the workers, robots and machines involved in the construction process. One of the greatest advantages of the 4{sup +}D Technology{sup TM} lies in that any change of the overall process procedures can virtually be tested. On the other hand, it shall financially be unbearable to alter the procedures consisting of plenty of structures and components, complicated detailed processes and long work hours in the physical space.

Digital Technology for Construction Period Reduction of Nuclear Power Plants

International Nuclear Information System (INIS)

You, Y. M.; Suh, K. Y.

2009-01-01

PHILOSOPHIA, Inc. and Seoul National University have jointly developed a first-of-a-kind engineering (FOAKE) solution. The solution lends itself to the four-plus-dimensional (4 + D) Technology TM resorting to three -dimensional (3D) computer-aided design (CAD) digital mockup (DMU). The aim is to minimize the working hours via process optimization by real-time exchange of design and process information in the ubiquitous system. The 4 + D Technology TM in the 3D virtual reality (VR) space and time plus cost coordinates, is developed to reduce the construction time as well as cost of nuclear power plants (NPPs) by optimizing the manufacturing procedure and construction process. The 4 + D Technology TM anchored to the 3D CAD DMU allows the interference of the NPP components to be checked upon early in the design stage, and the process sequences to be optimized. Moreover, its ergonomic and robotic technologies enable simulation of all the aspects of the workers, robots and machines involved in the construction process. One of the greatest advantages of the 4 + D Technology TM lies in that any change of the overall process procedures can virtually be tested. On the other hand, it shall financially be unbearable to alter the procedures consisting of plenty of structures and components, complicated detailed processes and long work hours in the physical space

Do shorter wavelengths improve contrast in optical mammography?

International Nuclear Information System (INIS)

Taroni, P; Pifferi, A; Torricelli, A; Spinelli, L; Danesini, G M; Cubeddu, R

2004-01-01

The detection of tumours with time-resolved transmittance imaging relies essentially on blood absorption. Previous theoretical and phantom studies have shown that both contrast and spatial resolution of optical images are affected by the optical properties of the background medium, and high absorption and scattering are generally beneficial. Based on these observations, wavelengths shorter than presently used (680-780 nm) could be profitable for optical mammography. A study was thus performed analysing time-resolved transmittance images at 637, 656, 683 and 785 nm obtained from 26 patients bearing 16 tumours and 15 cysts. The optical contrast proved to increase upon decreasing wavelengths for the detection of cancers in late-gated intensity images, with higher gain in contrast for lesions of smaller size (<1.5 cm diameter). For cysts either a progressive increase or decrease in contrast with wavelength was observed in scattering images

Periodic Table Target: A Game that Introduces the Biological Significance of Chemical Element Periodicity

Science.gov (United States)

Sevcik, Richard S.; McGinty, Ragan L.; Schultz, Linda D.; Alexander, Susan V.

2008-01-01

Periodic Table Target, a game for middle school or high school students, familiarizes students with the form of the periodic table and the biological significance of different elements. The Periodic Table Target game board is constructed as a class project, and the game is played to reinforce the content. Students are assigned several elements…

Non-shoring construction for T/G pedestal beams

International Nuclear Information System (INIS)

Abe, T.

1992-01-01

The T/G pedestal construction work has been the critical path within the T/B construction work of BWR type nuclear power plant. In order to meet the requirement of shortening the construction period and improved in safety on a Turbine Building (T/B) construction work, Non-soring construction for T/G Pedestal Beams was developed. By applying this method to T/G pedestal construction work, we succeeded in shortening the T/B construction period and improvement in safety significantly. (author)

Bounded and Periodic Solutions of Semilinear Impulsive Periodic System on Banach Spaces

Directory of Open Access Journals (Sweden)

Wei W

2008-01-01

Full Text Available Abstract A class of semilinear impulsive periodic system on Banach spaces is considered. First, we introduce the -periodic PC-mild solution of semilinear impulsive periodic system. By virtue of Gronwall lemma with impulse, the estimate on the PC-mild solutions is derived. The continuity and compactness of the new constructed Poincaré operator determined by impulsive evolution operator corresponding to homogenous linear impulsive periodic system are shown. This allows us to apply Horn's fixed-point theorem to prove the existence of -periodic PC-mild solutions when PC-mild solutions are ultimate bounded. This extends the study on periodic solutions of periodic system without impulse to periodic system with impulse on general Banach spaces. At last, an example is given for demonstration.

Toward 2D Seismic Wavefield Monitoring: Seismic Gradiometry for Long-Period Seismogram and Short-Period Seismogram Envelope applied to the Hi-net Array

Science.gov (United States)

Maeda, T.; Nishida, K.; Takagi, R.; Obara, K.

2015-12-01

The high-sensitive seismograph network Japan (Hi-net) operated by National Research Institute for Earth Science and Disaster Prevention (NIED) has about 800 stations with average separation of 20 km. We can observe long-period seismic wave propagation as a 2D wavefield with station separations shorter than wavelength. In contrast, short-period waves are quite incoherent at stations, however, their envelope shapes resemble at neighbor stations. Therefore, we may be able to extract seismic wave energy propagation by seismogram envelope analysis. We attempted to characterize seismic waveform at long-period and its envelope at short-period as 2D wavefield by applying seismic gradiometry. We applied the seismic gradiometry to a synthetic long-period (20-50s) dataset prepared by numerical simulation in realistic 3D medium at the Hi-net station layout. Wave amplitude and its spatial derivatives are estimated by using data at nearby stations. The slowness vector, the radiation pattern and the geometrical spreading are extracted from estimated velocity, displacement and its spatial derivatives. For short-periods at shorter than 1 s, seismogram envelope shows temporal and spatial broadening through scattering by medium heterogeneity. It is expected that envelope shape may be coherent among nearby stations. Based on this idea, we applied the same method to the time-integration of seismogram envelope to estimate its spatial derivatives. Together with seismogram envelope, we succeeded in estimating the slowness vector from the seismogram envelope as well as long-period waveforms by synthetic test, without using phase information. Our preliminarily results show that the seismic gradiometry suits the Hi-net to extract wave propagation characteristics both at long and short periods. This method is appealing that it can estimate waves at homogeneous grid to monitor seismic wave as a wavefield. It is promising to obtain phase velocity variation from direct waves, and to grasp wave

Development of new construction technologies for nuclear power plant

International Nuclear Information System (INIS)

Kawamata, Susumu; Itoh, Daisuke; Ichizono, Katsuyuki

1995-01-01

In order to proceed rationally with the construction of a nuclear power station, the followings are the subject to solve beside reducing the construction cost: shortening the construction period, improving the quality, and securing safety in the construction work. As a measure to solve the matters, we correctly construct the plant mainly applying 'all-weather proof construction method' and 'pre-assembled large-block construction method'. Furthermore, as the plant construction control system, we perform a construction work applying the design change management system, pre-assessment for safety, and the whole facility check. As a result of our effort, it was attained that when we compare the matured plant with the first unit, the construction cost is reduced by 30%, the construction period is shortened by 12 months, site manpower is decreased by 30%, and the plant had no sudden shutdowns even during the trial operation period. (author)

Nation-Scale Adoption of Shorter Breast Radiation Therapy Schedules Can Increase Survival in Resource Constrained Economies: Results From a Markov Chain Analysis

Energy Technology Data Exchange (ETDEWEB)

Khan, Atif J., E-mail: atif.j.khan@rutgers.edu [Department of Radiation Oncology, Robert Wood Johnson Medical School/Cancer Institute of New Jersey, New Brunswick, New Jersey (United States); Rafique, Raza [Suleman Dawood School of Business, Lahore University of Management Sciences, Lahore (Pakistan); Zafar, Waleed [Shaukat Khanum Memorial Cancer Hospital and Research Centre, Lahore (Pakistan); Shah, Chirag [Department of Radiation Oncology, Cleveland Clinic, Cleveland, Ohio (United States); Haffty, Bruce G. [Department of Radiation Oncology, Robert Wood Johnson Medical School/Cancer Institute of New Jersey, New Brunswick, New Jersey (United States); Vicini, Frank [Michigan HealthCare Professionals, Farmington Hills, Michigan (United States); Jamshed, Arif [Shaukat Khanum Memorial Cancer Hospital and Research Centre, Lahore (Pakistan); Zhao, Yao [Rutgers University School of Business, Newark, New Jersey (United States)

2017-02-01

Purpose: Hypofractionated whole breast irradiation and accelerated partial breast irradiation (APBI) offer women options for shorter courses of breast radiation therapy. The impact of these shorter schedules on the breast cancer populations of emerging economies with limited radiation therapy resources is unknown. We hypothesized that adoption of these schedules would improve throughput in the system and, by allowing more women access to life-saving treatments, improve patient survival within the system. Methods and Materials: We designed a Markov chain model to simulate the different health states that a postlumpectomy or postmastectomy patient could enter over the course of a 20-year follow-up period. Transition rates between health states were adapted from published data on recurrence rates. We used primary data from a tertiary care hospital in Lahore, Pakistan, to populate the model with proportional use of mastectomy versus breast conservation and to estimate the proportion of patients suitable for APBI. Sensitivity analyses on the use of APBI and relative efficacy of APBI were conducted to study the impact on the population. Results: The shorter schedule resulted in more women alive and more women remaining without evidence of disease (NED) compared with the conventional schedule, with an absolute difference of about 4% and 7% at 15 years, respectively. Among women who had lumpectomies, the chance of remaining alive and with an intact breast was 62% in the hypofractionation model and 54% in the conventional fractionation model. Conclusions: Increasing throughput in the system can result in improved survival, improved chances of remaining without evidence of disease, and improved chances of remaining alive with a breast. These findings are significant and suggest that adoption of hypofractionation in emerging economies is not simply a question of efficiency and cost but one of access to care and patient survivorship.

Nation-Scale Adoption of Shorter Breast Radiation Therapy Schedules Can Increase Survival in Resource Constrained Economies: Results From a Markov Chain Analysis

International Nuclear Information System (INIS)

Khan, Atif J.; Rafique, Raza; Zafar, Waleed; Shah, Chirag; Haffty, Bruce G.; Vicini, Frank; Jamshed, Arif; Zhao, Yao

2017-01-01

Purpose: Hypofractionated whole breast irradiation and accelerated partial breast irradiation (APBI) offer women options for shorter courses of breast radiation therapy. The impact of these shorter schedules on the breast cancer populations of emerging economies with limited radiation therapy resources is unknown. We hypothesized that adoption of these schedules would improve throughput in the system and, by allowing more women access to life-saving treatments, improve patient survival within the system. Methods and Materials: We designed a Markov chain model to simulate the different health states that a postlumpectomy or postmastectomy patient could enter over the course of a 20-year follow-up period. Transition rates between health states were adapted from published data on recurrence rates. We used primary data from a tertiary care hospital in Lahore, Pakistan, to populate the model with proportional use of mastectomy versus breast conservation and to estimate the proportion of patients suitable for APBI. Sensitivity analyses on the use of APBI and relative efficacy of APBI were conducted to study the impact on the population. Results: The shorter schedule resulted in more women alive and more women remaining without evidence of disease (NED) compared with the conventional schedule, with an absolute difference of about 4% and 7% at 15 years, respectively. Among women who had lumpectomies, the chance of remaining alive and with an intact breast was 62% in the hypofractionation model and 54% in the conventional fractionation model. Conclusions: Increasing throughput in the system can result in improved survival, improved chances of remaining without evidence of disease, and improved chances of remaining alive with a breast. These findings are significant and suggest that adoption of hypofractionation in emerging economies is not simply a question of efficiency and cost but one of access to care and patient survivorship.

Calculation of the mean differential group delay of periodically spun, randomly birefringent fibers

Science.gov (United States)

Galtarossa, Andrea; Griggio, Paola; Pizzinat, Anna; Palmieri, Luca

2002-05-01

Spinning is one of the most effective and well-known ways to reduce polarization mode dispersion of optical fibers. In spite of the popularity of spinning, a detailed theory of spin effects is still lacking. We report an analytical expression for the mean differential group delay of a randomly birefringent spun fiber. The result holds for any periodic spin function with a period shorter than the fiber's beat length.

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF's management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES ampersand H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES ampersand H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES ampersand H support organizations and administrative groups, and describes their interactions with the NIF Program

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF`s management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES&H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES&H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES&H support organizations and administrative groups, and describes their interactions with the NIF Program.

The construction of periodic unfolding operators on some compact Riemannian manifolds

DEFF Research Database (Denmark)

Dobberschütz, Sören; Böhm, Michael

2014-01-01

The notion of periodic unfolding has become a standard tool in the theory of periodic homogenization. However, all the results obtained so far are only applicable to the "flat" Euclidean space R n. In this paper, we present a generalization of the method of periodic unfolding applicable to struct...

Final construction of the C.R.E.O.L. 8 millimeter period hybrid undulator

Energy Technology Data Exchange (ETDEWEB)

Tesch, P.; Gallagher, J.; Elias, L. [Center for Research and Education in Optics and Lasers, Orlando, FL (United States)

1995-12-31

The construction of an 8 millimeter period hybrid undulator for the C.R.E.O.L. high power far-infared free electron laser has just been completed. This FEL is expected to come on-line in the fall of 1995 and produce close to a kilowatt of continuous power at wavelengths of 225 - 800 microns. The undulator has extremely precise mechanical tolerances and high field uniformity allowing for high electron beam recovery rates. Almost complete beam recovery is required for DC operation at high currents. A novel method for measuring the magnetic properties of individual magnets and sorting the magnets to reduce magnetic field errors will be reported. The peak field and phase errors of the undulator without the pole pieces are reduced through a magnet ordering procedure. These errors are further reduced by inserting and tuning adjustable pole pieces. The reduction of field errors through these two techniques will be presented. An analysis of the final undulator errors and the results of measurements of the mechanical tolerances will be presented.

The risk of shorter fasting time for pediatric deep sedation.

Science.gov (United States)

Clark, Mathew; Birisci, Esma; Anderson, Jordan E; Anliker, Christina M; Bryant, Micheal A; Downs, Craig; Dalabih, Abdallah

2016-01-01

Current guidelines adopted by the American Academy of Pediatrics calls for prolonged fasting times before performing pediatric procedural sedation and analgesia (PSA). PSA is increasingly provided to children outside of the operating theater by sedation trained pediatric providers and does not require airway manipulation. We investigated the safety of a shorter fasting time compared to a longer and guideline compliant fasting time. We tried to identify the association between fasting time and sedation-related complications. This is a prospective observational study that included children 2 months to 18 years of age and had an American Society of Anesthesiologists physical status classification of I or II, who underwent deep sedation for elective procedures, performed by pediatric critical care providers. Procedures included radiologic imaging studies, electroencephalograms, auditory brainstem response, echocardiograms, Botox injections, and other minor surgical procedures. Subjects were divided into two groups depending on the length of their fasting time (4-6 h and >6 h). Complication rates were calculated and compared between the three groups. In the studied group of 2487 subjects, 1007 (40.5%) had fasting time of 4-6 h and the remaining 1480 (59.5%) subjects had fasted for >6 h. There were no statistically significant differences in any of the studied complications between the two groups. This study found no difference in complication rate in regard to the fasting time among our subjects cohort, which included only healthy children receiving elective procedures performed by sedation trained pediatric critical care providers. This suggests that using shorter fasting time may be safe for procedures performed outside of the operating theater that does not involve high-risk patients or airway manipulation.

Magnetospheric Truncation, Tidal Inspiral, and the Creation of Short-period and Ultra-short-period Planets

Energy Technology Data Exchange (ETDEWEB)

Lee, Eve J.; Chiang, Eugene, E-mail: evelee@berkeley.edu [Department of Astronomy, University of California, Berkeley, CA 94720-3411 (United States)

2017-06-10

Sub-Neptunes around FGKM dwarfs are evenly distributed in log orbital period down to ∼10 days, but dwindle in number at shorter periods. Both the break at ∼10 days and the slope of the occurrence rate down to ∼1 day can be attributed to the truncation of protoplanetary disks by their host star magnetospheres at corotation. We demonstrate this by deriving planet occurrence rate profiles from empirical distributions of pre-main-sequence stellar rotation periods. Observed profiles are better reproduced when planets are distributed randomly in disks—as might be expected if planets formed in situ—rather than piled up near disk edges, as would be the case if they migrated in by disk torques. Planets can be brought from disk edges to ultra-short (<1 day) periods by asynchronous equilibrium tides raised on their stars. Tidal migration can account for how ultra-short-period planets are more widely spaced than their longer-period counterparts. Our picture provides a starting point for understanding why the sub-Neptune population drops at ∼10 days regardless of whether the host star is of type FGK or early M. We predict planet occurrence rates around A stars to also break at short periods, but at ∼1 day instead of ∼10 days because A stars rotate faster than stars with lower masses (this prediction presumes that the planetesimal building blocks of planets can drift inside the dust sublimation radius).

Magnetospheric Truncation, Tidal Inspiral, and the Creation of Short-period and Ultra-short-period Planets

International Nuclear Information System (INIS)

Lee, Eve J.; Chiang, Eugene

2017-01-01

Sub-Neptunes around FGKM dwarfs are evenly distributed in log orbital period down to ∼10 days, but dwindle in number at shorter periods. Both the break at ∼10 days and the slope of the occurrence rate down to ∼1 day can be attributed to the truncation of protoplanetary disks by their host star magnetospheres at corotation. We demonstrate this by deriving planet occurrence rate profiles from empirical distributions of pre-main-sequence stellar rotation periods. Observed profiles are better reproduced when planets are distributed randomly in disks—as might be expected if planets formed in situ—rather than piled up near disk edges, as would be the case if they migrated in by disk torques. Planets can be brought from disk edges to ultra-short (<1 day) periods by asynchronous equilibrium tides raised on their stars. Tidal migration can account for how ultra-short-period planets are more widely spaced than their longer-period counterparts. Our picture provides a starting point for understanding why the sub-Neptune population drops at ∼10 days regardless of whether the host star is of type FGK or early M. We predict planet occurrence rates around A stars to also break at short periods, but at ∼1 day instead of ∼10 days because A stars rotate faster than stars with lower masses (this prediction presumes that the planetesimal building blocks of planets can drift inside the dust sublimation radius).

Examining the construct validity of the Basic Traits Inventory and the Ten-Item Personality Inventory in the South African context

Directory of Open Access Journals (Sweden)

Samantha A. Metzer

2014-08-01

Full Text Available Orientation: As there has recently been a need for researchers to consider shorter personality measures, we compared the construct validity of a longer and a shorter personality measure in the South African context. Research purpose: The main purpose of this study was to examine the discriminant and convergent validity of two personality measures that measure the big five personality factors: the longer Basic Traits Inventory (BTI and the shorter Ten-Item Personality Inventory (TIPI. Motivation for the study: Researchers have indicated a need for shorter personality measures, such as the TIPI, to assess personality dimensions. This study assessed the validity of the shorter measure in comparison with the BTI, which is considered cross-culturally valid in the South African context. Research approach, design and method: This study used a quantitative research design. Both personality measures were administered manually to a convenience sample of student participants (n = 662, and data were analysed through factor analysis utilising oblique rotation for all items. Main findings: The main findings indicate that, although the construct validity of both measures was satisfactory, the TIPI yielded unsatisfactory reliability. Practical/managerial implications: The BTI is a more reliable measure than the TIPI, which should only be used when time is limited. Contribution/value-add: In addition to providing insight into how the length of an assessment impacts on the reliability of a measure, this study further reinforces the use of the basic traits inventory as a measure that reliably measures personality in South Africa.

Modular construction: 30 years of experience in the naval sector, useful for nuclear power plants

International Nuclear Information System (INIS)

Lepelletier, P.; Danguy des Deserts, S.

2014-01-01

This article reviews the benefits of modular construction in the sector of submarines that was implemented in the mid eighties in French shipyards. The design of the submarine is cut in different longitudinal parts so that each part can be built and completely equipped independently from the other parts. The different parts are then joined and welded at the end of the process of fabrication to form the submarine. The main advantages of such a construction are shorter construction times, standardized construction and a higher quality standard. DCNS proposes to use modular construction for the design of Flexblue which is an immersed small modular reactor (SMR). More generally, modular construction will add economic competitiveness to SMR reactors that will be necessary to their full development on a worldwide scale

The Change of the Family Life Affected by the Shorter Working Time : From the Point of View of the Home Management

OpenAIRE

平田, 道憲

1994-01-01

In Japan, the working time has been decreasing. However, Japanese working people spend more hours per year to work than those in Western countries. The policy of the shorter working time is conducted by the Japanese Government in order that the working people get more free time. This paper examines whether the shorter working time of working members in the family enrich the time use of the other members of the family. Especially, the effect of the shorter working time of husbands to wives...

Representativeness of shorter measurement sessions in long-term indoor air monitoring.

Science.gov (United States)

Maciejewska, M; Szczurek, A

2015-02-01

Indoor air quality (IAQ) considerably influences health, comfort and the overall performance of people who spend most of their lives in confined spaces. For this reason, there is a strong need to develop methods for IAQ assessment. The fundamental issue in the quantitative determination of IAQ is the duration of measurements. Its inadequate choice may result in providing incorrect information and this potentially leads to wrong conclusions. The most complete information may be acquired through long-term monitoring. However it is typically perceived as impractical due to time and cost load. The aim of this study was to determine whether long-term monitoring can be adequately represented by a shorter measurement session. There were considered three measurable quantities: temperature, relative humidity and carbon dioxide concentration. They are commonly recognized as indicatives for IAQ and may be readily monitored. Scaled Kullback-Leibler divergence, also called relative entropy, was applied as a measure of data representativeness. We considered long-term monitoring in a range from 1 to 9 months. Based on our work, the representative data on CO2 concentration may be acquired while performing measurements during 20% of time dedicated to long-term monitoring. In the case of temperature and relative humidity the respective time demand was 50% of long-term monitoring. From our results, in indoor air monitoring strategies, there could be considered shorter measurement sessions, while still collecting data which are representative for long-term monitoring.

Geographic variation in avian incubation periods and parental influences on embryonic temperature.

Science.gov (United States)

Martin, Thomas E; Auer, Sonya K; Bassar, Ronald D; Niklison, Alina M; Lloyd, Penn

2007-11-01

Theory predicts shorter embryonic periods in species with greater embryo mortality risk and smaller body size. Field studies of 80 passerine species on three continents yielded data that largely conflicted with theory; incubation (embryonic) periods were longer rather than shorter in smaller species, and egg (embryo) mortality risk explained some variation within regions, but did not explain larger differences in incubation periods among geographic regions. Incubation behavior of parents seems to explain these discrepancies. Bird embryos are effectively ectothermic and depend on warmth provided by parents sitting on the eggs to attain proper temperatures for development. Parents of smaller species, plus tropical and southern hemisphere species, commonly exhibited lower nest attentiveness (percent of time spent on the nest incubating) than larger and northern hemisphere species. Lower nest attentiveness produced cooler minimum and average embryonic temperatures that were correlated with longer incubation periods independent of nest predation risk or body size. We experimentally tested this correlation by swapping eggs of species with cool incubation temperatures with eggs of species with warm incubation temperatures and similar egg mass. Incubation periods changed (shortened or lengthened) as expected and verified the importance of egg temperature on development rate. Slower development resulting from cooler temperatures may simply be a cost imposed on embryos by parents and may not enhance offspring quality. At the same time, incubation periods of transferred eggs did not match host species and reflect intrinsic differences among species that may result from nest predation and other selection pressures. Thus, geographic variation in embryonic development may reflect more complex interactions than previously recognized.

Prediction of the period of psychotic episode in individual schizophrenics by simulation-data construction approach.

Science.gov (United States)

Huang, Chun-Jung; Wang, Hsiao-Fan; Chiu, Hsien-Jane; Lan, Tsuo-Hung; Hu, Tsung-Ming; Loh, El-Wui

2010-10-01

Although schizophrenia can be treated, most patients still experience inevitable psychotic episodes from time to time. Precautious actions can be taken if the next onset can be predicted. However, sufficient information is always lacking in the clinical scenario. A possible solution is to use the virtual data generated from limited of original data. Data construction method (DCM) has been shown to generate the virtual felt earthquake data effectively and used in the prediction of further events. Here we investigated the performance of DCM in deriving the membership functions and discrete-event simulations (DES) in predicting the period embracing the initiation and termination time-points of the next psychotic episode of 35 individual schizophrenic patients. The results showed that 21 subjects had a success of simulations (RSS) ≥70%. Further analysis demonstrated that the co-morbidity of coronary heart diseases (CHD), risks of CHD, and the frequency of previous psychotic episodes increased the RSS.

Earth Noise in the 20- to 100-Second Period Range

Science.gov (United States)

1975-09-09

instruments were incapable of following fluctuations of shorter periods.) Gretener (1967) obtained similar results. Both of these workers...found indica- tions that the convection eddies believed to exist were comparable to the hole diameter in vertical extent. Both Gretener (1967...Heat flow in Western Canada: geoph. J., v. 6, p. 245-261. Gretener , P. E., 1967, On the thermal instability of large diameter wells: geophysics, J32

Modeling and designing of variable-period and variable-pole-number undulator

Directory of Open Access Journals (Sweden)

I. Davidyuk

2016-02-01

Full Text Available The concept of permanent-magnet variable-period undulator (VPU was proposed several years ago and has found few implementations so far. The VPUs have some advantages as compared with conventional undulators, e.g., a wider range of radiation wavelength tuning and the option to increase the number of poles for shorter periods. Both these advantages will be realized in the VPU under development now at Budker INP. In this paper, we present the results of 2D and 3D magnetic field simulations and discuss some design features of this VPU.

Refinement of the charcoal meal study by reduction of the fasting period.

Science.gov (United States)

Prior, Helen; Ewart, Lorna; Bright, Jonathan; Valentin, Jean-Pierre

2012-05-01

The aim of this investigation was to determine whether a shorter fasting period than the one historically employed for the charcoal meal test, could be used when measuring gastric emptying and intestinal transit within the same animal, and to ascertain whether the scientific outcome would be affected by this benefit to animal welfare. Rats and mice were fasted for 0, 3, 6 or 18 hours before the oral administration of vehicle or atropine. One hour later, the animals were orally administered a charcoal meal, then 20 minutes later, they were killed and the stomach and small intestine were removed. Intestinal transit time (the position of the charcoal front as a percentage of the total length of the small intestine) and relative gastric emptying (weight of stomach contents) were measured. Rats and mice fasted for six hours showed results for gastric emptying and intestinal transit which were similar to those obtained in animals fasted for 18 hours. Reducing the fasting period reduced the body weight loss in both species, and mice on shorter fasts could be group-housed, as hunger-induced fighting was lessened. Therefore, a fasting period of six hours was subsequently adopted for charcoal meal studies at our institution. 2011 FRAME.

Rogue periodic waves of the modified KdV equation

Science.gov (United States)

Chen, Jinbing; Pelinovsky, Dmitry E.

2018-05-01

Rogue periodic waves stand for rogue waves on a periodic background. Two families of travelling periodic waves of the modified Korteweg–de Vries (mKdV) equation in the focusing case are expressed by the Jacobian elliptic functions dn and cn. By using one-fold and two-fold Darboux transformations of the travelling periodic waves, we construct new explicit solutions for the mKdV equation. Since the dn-periodic wave is modulationally stable with respect to long-wave perturbations, the new solution constructed from the dn-periodic wave is a nonlinear superposition of an algebraically decaying soliton and the dn-periodic wave. On the other hand, since the cn-periodic wave is modulationally unstable with respect to long-wave perturbations, the new solution constructed from the cn-periodic wave is a rogue wave on the cn-periodic background, which generalizes the classical rogue wave (the so-called Peregrine’s breather) of the nonlinear Schrödinger equation. We compute the magnification factor for the rogue cn-periodic wave of the mKdV equation and show that it remains constant for all amplitudes. As a by-product of our work, we find explicit expressions for the periodic eigenfunctions of the spectral problem associated with the dn and cn periodic waves of the mKdV equation.

Construction and commissioning experience of evolutionary water cooled nuclear power plants

International Nuclear Information System (INIS)

2004-04-01

Electricity market liberalization is an established fact in several countries and there is a trend to adopt it in other countries. The essential aim of market liberalization is to improve the overall economic efficiency. In order that nuclear power remains a viable option for electricity generation, its costs should be competitive with alternative sources while, at the same time, it should have a safe and reliable operation record. The capital cost of nuclear power plants (NPPs) generally accounts for 43-70% of the total nuclear electricity generation costs, compared to 26-48% for coal plants and 13-32% for gas plants. Most of these expenditures are incurred during the construction phase of a NPP. The achievement of shorter construction periods using improved technology and construction methods has a significant benefit on the costs incurred prior to any production of electricity. This document is intended to make the recent worldwide experience on construction and commissioning of evolutionary water cooled NPPs available to Member States and especially to those with nuclear power plants under construction/planning, and to those seriously considering nuclear power projects in the future. The final aim is to assist utilities and other organizations in Member States to improve the construction of nuclear power plants and achieve shortened schedules and reduced costs without compromising quality and safety. This document aims to provide an overview of the most advanced technologies, methods and processes used in construction and commissioning of recent nuclear projects. To better achieve this objective the presentation is selectively focused more on the new developments rather than providing a full review of all issues related to construction and commissioning. The experience described in this TECDOC applies to managers, engineers, supervisors, technicians and workers in various organizations dealing with the site construction and commissioning of nuclear power plants

Geographic variation in avian incubation periods and parental influences on embryonic temperature

Science.gov (United States)

Martin, T.E.; Auer, S.K.; Bassar, R.D.; Niklison, Alina M.; Lloyd, P.

2007-01-01

Theory predicts shorter embryonic periods in species with greater embryo mortality risk and smaller body size. Field studies of 80 passerine species on three continents yielded data that largely conflicted with theory; incubation (embryonic) periods were longer rather than shorter in smaller species, and egg (embryo) mortality risk explained some variation within regions, but did not explain larger differences in incubation periods among geographic regions. Incubation behavior of parents seems to explain these discrepancies. Bird embryos are effectively ectothermic and depend on warmth provided by parents sitting on the eggs to attain proper temperatures for development. Parents of smaller species, plus tropical and southern hemisphere species, commonly exhibited lower nest attentiveness (percent of time spent on the nest incubating) than larger and northern hemisphere species. Lower nest attentiveness produced cooler minimum and average embryonic temperatures that were correlated with longer incubation periods independent of nest predation risk or body size. We experimentally tested this correlation by swapping eggs of species with cool incubation temperatures with eggs of species with warm incubation temperatures and similar egg mass. Incubation periods changed (shortened or lengthened) as expected and verified the importance of egg temperature on development rate. Slower development resulting from cooler temperatures may simply be a cost imposed on embryos by parents and may not enhance offspring quality. At the same time, incubation periods of transferred eggs did not match host species and reflect intrinsic differences among species that may result from nest predation and other selection pressures. Thus, geographic variation in embryonic development may reflect more complex interactions than previously recognized. ?? 2007 The Author(s).

Holonomic systems for period mappings

Energy Technology Data Exchange (ETDEWEB)

Chen, Jingyue, E-mail: jychen@brandeis.edu [Department of Mathematics, Brandeis University, Waltham, MA 02454 (United States); Huang, An, E-mail: anhuang@math.harvard.edu [Department of Mathematics, Harvard University, Cambridge, MA 02138 (United States); Lian, Bong H., E-mail: lian@brandeis.edu [Department of Mathematics, Brandeis University, Waltham, MA 02454 (United States)

2015-09-15

Period mappings were introduced in the sixties [4] to study variation of complex structures of families of algebraic varieties. The theory of tautological systems was introduced recently [7,8] to understand period integrals of algebraic manifolds. In this paper, we give an explicit construction of a tautological system for each component of a period mapping. We also show that the D-module associated with the tautological system gives rise to many interesting vanishing conditions for period integrals at certain special points of the parameter space.

Hypermetabolism in ALS is associated with greater functional decline and shorter survival.

Science.gov (United States)

Steyn, Frederik J; Ioannides, Zara A; van Eijk, Ruben P A; Heggie, Susan; Thorpe, Kathryn A; Ceslis, Amelia; Heshmat, Saman; Henders, Anjali K; Wray, Naomi R; van den Berg, Leonard H; Henderson, Robert D; McCombe, Pamela A; Ngo, Shyuan T

2018-04-29

To determine the prevalence of hypermetabolism, relative to body composition, in amyotrophic lateral sclerosis (ALS) and its relationship with clinical features of disease and survival. Fifty-eight patients with clinically definite or probable ALS as defined by El Escorial criteria, and 58 age and sex-matched control participants underwent assessment of energy expenditure. Our primary outcome was the prevalence of hypermetabolism in cases and controls. Longitudinal changes in clinical parameters between hypermetabolic and normometabolic patients with ALS were determined for up to 12 months following metabolic assessment. Survival was monitored over a 30-month period following metabolic assessment. Hypermetabolism was more prevalent in patients with ALS than controls (41% vs 12%, adjusted OR=5.4; pALS. Mean lower motor neuron score (SD) was greater in hypermetabolic patients when compared with normometabolic patients (4 (0.3) vs 3 (0.7); p=0.04). In the 12 months following metabolic assessment, there was a greater change in Revised ALS Functional Rating Scale score in hypermetabolic patients when compared with normometabolic patients (-0.68 points/month vs -0.39 points/month; p=0.01). Hypermetabolism was inversely associated with survival. Overall, hypermetabolism increased the risk of death during follow-up to 220% (HR 3.2, 95% CI 1.1 to 9.4, p=0.03). Hypermetabolic patients with ALS have a greater level of lower motor neuron involvement, faster rate of functional decline and shorter survival. The metabolic index could be important for informing prognosis in ALS. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

A Research of Construction Mechanism of Vassal State's City Group during Spring and Autumn Period Based on the Analyzation of Geographic Image - Take south region of Shandong as example

Science.gov (United States)

Gao, X.; Li, B.; Zhou, X.

2015-08-01

Spring and Autumn period, the vassal states began to carry out country defense construction actively, brought changes to building the ideological. At that time, the south region of Shandong, as an independent unit of geography, seldom affected by external factors, and had striking cultural characteristics. Vassal states there constructed their capital mainly to defense the neighboring countries and cope with small scale mergers war, not involving the nationwide military deployment. Therefore, the region reflect the construction thought changes during the Spring and Autumn Period, and consistent with the research purpose. Based on this judgment, the author analyzed each capital's location and terrain feature by topographic map. In brief, the Spring and Autumn Period, feudal states acted of one's own free will, the relationship between cities contained the one within and between vassal states. Within vassal state relationships included economic support, entrenching each other and protecting the country together. Meanwhile, strategic defensing, scrambling for resources and geographical location comprised of the competition between vassal states. In the agrarian age, the political centers and agricultural areas were interdependent, giving priority to the development of political cities. Transformation of capitals' space layout was actually the process of carving up farming plains, the powerful states occupy favorable geographical position, and the small countries would be encroached and annexed gradually.

ATM/RB1 mutations predict shorter overall survival in urothelial cancer.

Science.gov (United States)

Yin, Ming; Grivas, Petros; Emamekhoo, Hamid; Mendiratta, Prateek; Ali, Siraj; Hsu, JoAnn; Vasekar, Monali; Drabick, Joseph J; Pal, Sumanta; Joshi, Monika

2018-03-30

Mutations of DNA repair genes, e.g. ATM/RB1 , are frequently found in urothelial cancer (UC) and have been associated with better response to cisplatin-based chemotherapy. Further external validation of the prognostic value of ATM/RB1 mutations in UC can inform clinical decision making and trial designs. In the discovery dataset, ATM/RB1 mutations were present in 24% of patients and were associated with shorter OS (adjusted HR 2.67, 95% CI, 1.45-4.92, p = 0.002). There was a higher mutation load in patients carrying ATM/RB1 mutations (median mutation load: 6.7 versus 5.5 per Mb, p = 0.072). In the validation dataset, ATM/RB1 mutations were present in 22.2% of patients and were non-significantly associated with shorter OS (adjusted HR 1.87, 95% CI, 0.97-3.59, p = 0.06) and higher mutation load (median mutation load: 8.1 versus 7.2 per Mb, p = 0.126). Exome sequencing data of 130 bladder UC patients from The Cancer Genome Atlas (TCGA) dataset were analyzed as a discovery cohort to determine the prognostic value of ATM/RB1 mutations. Results were validated in an independent cohort of 81 advanced UC patients. Cox proportional hazard regression analysis was performed to calculate the hazard ratio (HR) and 95% confidence interval (CI) to compare overall survival (OS). ATM/RB1 mutations may be a biomarker of poor prognosis in unselected UC patients and may correlate with higher mutational load. Further studies are required to determine factors that can further stratify prognosis and evaluate predictive role of ATM/RB1 mutation status to immunotherapy and platinum-based chemotherapy.

Medicaid Enrollment Gap Length and Number of Medicaid Enrollment Periods Among US Children

Science.gov (United States)

Schoendorf, Kenneth C.

2014-01-01

Objectives. We examined gap length, characteristics associated with gap length, and number of enrollment periods among Medicaid-enrolled children in the United States. Methods. We linked the 2004 National Health Interview Survey to Medicaid Analytic eXtract files for 1999 through 2008. We examined linkage-eligible children aged 5 to 13 years in the 2004 National Health Interview Survey who disenrolled from Medicaid. We generated Kaplan-Meier curves of time to reenrollment. We used Cox proportional hazards models to assess the effect of sociodemographic variables on time to reenrollment. We compared the percentage of children enrolled 4 or more times across sociodemographic groups. Results. Of children who disenrolled from Medicaid, 35.8%, 47.1%, 63.5%, 70.8%, and 79.1% of children had reenrolled in Medicaid by 6 months, 1, 3, 5, and 10 years, respectively. Children who were younger, poorer, or of minority race/ethnicity or had lower educated parents had shorter gaps in Medicaid and were more likely to have had 4 or more Medicaid enrollment periods. Conclusions. Nearly half of US children who disenrolled from Medicaid reenrolled within 1 year. Children with traditionally high-risk demographic characteristics had shorter gaps in Medicaid enrollment and were more likely to have more periods of Medicaid enrollment. PMID:25033135

The effect of shorter exposure versus prolonged exposure on treatment outcome in Tourette syndrome and chronic tic disorders - an open trial.

Science.gov (United States)

van de Griendt, Jolande M T M; van Dijk, Maarten K; Verdellen, Cara W J; Verbraak, Marc J P M

2018-01-11

Exposure and response prevention has shown to be an effective strategy and is considered a first-line intervention in the behavioural treatment of tic disorders. Prior research demonstrated significant tic reduction after 12 two hour sessions. In this open trial, the question is addressed whether, relative to these prolonged sessions, exposure sessions of shorter duration yield differential outcome for patients with tic disorders. A total of 29 patients diagnosed with Tourette syndrome (TS) or chronic tic disorder were treated with shorter exposure sessions (1 h), and these data were compared to the data from a study about prolonged exposure (2 h, n = 21). Outcome was measured by the Yale Global Tic Severity Scale (YGTSS). Results suggest that after taking the difference in illness duration between the two groups into account, the effectiveness of shorter exposure sessions is not inferior to that of prolonged exposure. Results suggest that treatment with shorter exposure might be more efficient and more patients can be reached. Future research is needed to gain more insight into the mechanisms underlying the efficacy of behavioural treatments for tics.

36 CFR 14.29 - Timely construction.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Timely construction. 14.29...-OF-WAY Procedures § 14.29 Timely construction. (a) Unless otherwise provided by law, a period of up to five years from the date a right-of-way is granted is allowed for completion of construction...

N-Terminal Domains in Two-Domain Proteins Are Biased to Be Shorter and Predicted to Fold Faster Than Their C-Terminal Counterparts

Directory of Open Access Journals (Sweden)

Etai Jacob

2013-04-01

Full Text Available Computational analysis of proteomes in all kingdoms of life reveals a strong tendency for N-terminal domains in two-domain proteins to have shorter sequences than their neighboring C-terminal domains. Given that folding rates are affected by chain length, we asked whether the tendency for N-terminal domains to be shorter than their neighboring C-terminal domains reflects selection for faster-folding N-terminal domains. Calculations of absolute contact order, another predictor of folding rate, provide additional evidence that N-terminal domains tend to fold faster than their neighboring C-terminal domains. A possible explanation for this bias, which is more pronounced in prokaryotes than in eukaryotes, is that faster folding of N-terminal domains reduces the risk for protein aggregation during folding by preventing formation of nonnative interdomain interactions. This explanation is supported by our finding that two-domain proteins with a shorter N-terminal domain are much more abundant than those with a shorter C-terminal domain.

Constraints to 3R construction waste reduction among contractors in Penang

Science.gov (United States)

Ng, L. S.; Tan, L. W.; Seow, T. W.

2018-04-01

Rapid development of construction industry increases construction waste on landfill leading to shorter life span of the landfill. Waste reduction through Reduce, Reuse and Recycle (3R) practice has been encouraged in construction industry towards sustainable waste management since couple of decades ago. However, waste reduction through 3R is still at its infancy in construction industry in Penang, Malaysia. The aim of this paper is to determinate the constraints to construction waste reduction through 3R among contractors in Penang. The findings reported herein is based on feedbacks from 143 construction contractors of grade CIDB G7, G6 and G5 based in Penang, experts from Penang Local Authority, CIDB in Penang and its headquarters, National Solid Waste Management Department, and headquarters of Solid Waste and Public Cleansing Management Corporation (SWCorp). Based on interviews and questionnaire surveys, constraints identified are Time and cost, Contractor’s attitude and low participation, Lack of enforcement law and regulation, Lack of awareness and knowledge, Lack of coordination, and Lack of space. Awareness and knowledge, and enforcement law and regulation are the major barriers which influence others constraints as well. Therefore, these constraints should be emphasized by the authorities in order to improve the implementation of 3R construction waste reduction.

Visualization of construction engineering

International Nuclear Information System (INIS)

Okada, Hisako; Miura, Jun

2000-01-01

It is required for nuclear power plant construction to reduce construction cost and shorten construction period. An early and accurate construction planning including schedule coordination among the companies has recently become more important and it is possible to obtain necessary information for construction planning in early stage. In this situation, we have been developing a visualization system for construction engineering for nuclear power plants. This system has an interface with the existing Plant Layout 3D-CAD system and consists of three sub systems: (1) Scheduling and simulation system, (2) Yard planning system and (3) Scaffolding planning system. This paper describes overview of this system. This visualization system is very helpful for construction engineers to easily understand situation and environment around installation area, to easily plan a work sequence and confirm the planned schedule, and it is also effective for customers and workers to understand the planning. As a result, this visualization system enables safety and high quality construction. (author)

Quasi-periodic luminosity variations in dwarf novae

International Nuclear Information System (INIS)

Robinson, E.L.; Nather, R.E.

1979-01-01

We have identified quasi-periodic oscillations in the light curves of five dwarf novae--U Gem, SS Cyg, RU Peg, KT Per, and VW Hyi-- and in the light curve of the quasi-periodic X-ray source Sco X-1. The mean periods of the quasi-periodic oscillations range from 32 s in SS Cyg to 147 s in KT Per and 165 s in Sco X-l. Their amplitudes are typically 0.005--0.0l mag. The properties of the quasi-periodic oscillations are represented well by a second-order autoregressive process. Use of this representation shows that the length of time over which the quasi-periodic oscillations maintain coherence is very short, typically 3--5 cycles of the oscillations. Thus the quasi-periodic oscillations can be distinguished from the short-period coherent oscillations in dwarf novae, which are usually interpreted as white dwarf pulsations, because t the periods of the quasi-periodic oscillations are 3--4 times longer and their coherence time is much shorter. The quasi-periodic oscillations occur in dwarf novae only during their eruptions and occur in Sco X-l only when the system is bright. The presence of the oscillations does not depend on the subclass to which a dwarf nova belongs or on the morphology of the individual eruptions. We argue that their short periods, their short coherence times, and their presence in Sco X-l require that the quasi-periodic oscillations be produced by the accretion disk, and not by the stars or by the boundary between the a accretion disk and its central star

The history of the construction of main state irrigation systems in the postwar period

Directory of Open Access Journals (Sweden)

A. N. Chepurda

2017-03-01

It was established that the construction of large public irrigation systems in Ukraine started in 1951 stated that hydro construction that unfolded in the south of Ukraine, opened prospects to final elimination of the impact of drought and dry winds, the prospects for an unprecedented economic prosperity of the area.

How do shorter working hours affect employee wellbeing? : Shortening working time in Finland

OpenAIRE

Lahdenperä, Netta

2017-01-01

The way work is done is dramatically changing due to digital breakthroughs. Generation Y is entering the workforce with a changed attitude towards work as organizations are increasing their focus towards employee wellbeing. Organizations who adopt the new model of work and understand the importance of the wellbeing of their staff are leading the transition to a more efficient business, better working life and a healthier planet. The thesis explores the numerous effects of shorter working...

A generalized, periodic nonlinearity-reduced interferometer for straightness measurements

International Nuclear Information System (INIS)

Wu Chienming

2008-01-01

Periodic nonlinearity is a systematic error limiting the accuracy of displacement measurements at the nanometer level. However, an interferometer with a displacement measurement accuracy of less than 1 nm is required in nanometrology and in fundamental scientific research. To meet this requirement, a generalized, periodic nonlinearity-reduced interferometer, based on three construction principles has been developed for straightness measurements. These three construction principles have resulted in an interferometer with a highly stable design with reduced periodic nonlinearity. Verifications by a straightness interferometer have demonstrated that the periodic nonlinearity was less than 40 pm. The results also demonstrate that the interferometer design is capable of subnanometer accuracy and is useful in nanometrology

Perception of User Criteria in the Context of Sustainability of Modern Methods of Construction Based on Wood

Directory of Open Access Journals (Sweden)

Jozef Švajlenka

2018-01-01

Full Text Available Recent developments in the construction industry have brought more efficient and sustainable technologies, technological procedures, and materials. An example of this are modern methods of construction, which offer larger production volumes with a higher quality and shorter procurement time. The goal of those methods is to improve construction sustainability through quality improvement, customer satisfaction, shortened construction time, and reduced environmental impact. The main goal of this research is to demonstrate, by means of theoretical assumptions, surveys, and analyses, the sustainability of modern methods of construction based on wood. The work focuses on identifying the user criteria for construction sustainability. Selected user criteria of construction sustainability are applied in a socio-economic survey whose purpose is to determine how users perceive the efficiency of selected construction systems. We evaluate certain user parameters in the context of sustainability by relying on the users of buildings (family houses which have already been built and compare the results with declared design parameters.

Linking climate change to water provision: greywater treatment by constructed wetlands

Science.gov (United States)

Qomariyah, S.; Ramelan, AH; Setyono, P.; Sobriyah

2018-03-01

Climate change has been felt to take place in Indonesia, causing the temperature to increase, additional drought with more moisture evaporates from rivers, lakes, and other bodies of water, and intense rainfall in a shorter rainy season. One of the major concerns is the risk of severe drought leading to water shortages. It will affect water supply and agriculture yields. As a country extremely vulnerable to the climate change, Indonesia must adapt to the serious environmental issues. This paper aims to offer an effort of water provision by recycling and reusing of greywater applying constructed wetland systems. The treated greywater is useful as water provision for non-consumptive uses. A recent experiment was conducted on a household yard using a single horizontal subsurface flow type of constructed wetland. The experiments demonstrated that the constructed wetland systems reduced effectively the pollutants of TSS, BOD, COD, and detergent to the level that are compliant with regulatory standards. The constructed wetland has been established for almost two years however the system still works properly.

Applicability of the shorter ‘Bangladesh regimen’ in high multidrug-resistant tuberculosis settings

Directory of Open Access Journals (Sweden)

Giovanni Sotgiu

2017-03-01

Full Text Available In spite of the recent introduction of two new drugs (delamanid and bedaquiline and a few repurposed compounds to treat multidrug-resistant and extensively drug-resistant tuberculosis (MDR- and XDR-TB, clinicians are facing increasing problems in designing effective regimens in severe cases. Recently a 9 to 12-month regimen (known as the ‘Bangladesh regimen’ proved to be effective in treating MDR-TB cases. It included an initial phase of 4 to 6 months of kanamycin, moxifloxacin, prothionamide, clofazimine, pyrazinamide, high-dose isoniazid, and ethambutol, followed by 5 months of moxifloxacin, clofazimine, pyrazinamide, and ethambutol. However, recent evidence from Europe and Latin America identified prevalences of resistance to the first-line drugs in this regimen (ethambutol and pyrazinamide exceeding 60%, and of prothionamide exceeding 50%. Furthermore, the proportions of resistance to the two most important pillars of the regimen – quinolones and kanamycin – were higher than 40%. Overall, only 14 out of 348 adult patients (4.0% were susceptible to all of the drugs composing the regimen, and were therefore potentially suitable for the ‘shorter regimen’. A shorter, cheaper, and well-tolerated MDR-TB regimen is likely to impact the number of patients treated and improve adherence if prescribed to the right patients through the systematic use of rapid MTBDRsl testing.

The perspectives of research in the construction field in Romania during the 2014-2020 period

OpenAIRE

Mihai VRABIE; Sergiu-Andrei BĂETU

2013-01-01

The construction field represents an important part of the Romanian economy (and of UE), with a strong social impact on the quality of citizen life. Naturally, the research from the construction field should be a priority in research and innovation activity. However, the research programs recently launched (Horizon 2020, from EU, and the Strategy of Research and Innovation 2014-2020 in Romania), don’t mention the construction field as an explicit priority. Under these conditions, we can speak...

Summary of nuclear power plant construction

International Nuclear Information System (INIS)

Tamura, Saburo

1973-01-01

Various conditions for the construction of nuclear power plants in Japan without natural resources were investigated. Expansion of the sites of plants, change of reactor vessels, standardization of nuclear power plants, possiblity of the reduction of construction period, approaching of nuclear power plants to consuming cities, and group construction were studied. Evaluation points were safety and economy. Previous sites of nuclear power plants were mostly on plane ground or cut and enlarge sites. Proposals for underground or offshore plants have been made. The underground plants were made at several places in Europe, and the ocean plant is now approved in U.S.A. as a plant on a man-made island. Vessels for containing nuclear reactors are the last barriers to the leakage of radioactive substance. At the initial period, the vessels were made of steel, which were surrounded by shielding material. Those were dry well type containers. Then, vessel type changed to pressure-suppression type wet containers. Now, it tends to concrete (PC or RC) type containers. There is the policy on the standardization of nuclear power plants by U.S.A.E.C. in recent remarkable activity. The merit and effect of the standardization were studied, and are presented in this paper. Cost of the construction of nuclear power plants is expensive, and interest of money is large. Then, the reduction of construction period is an important problem. The situations of plants approaching to consuming cities in various countries were studied. Idea of group construction is described. (Kato, T.)

75 FR 70349 - Notice of Final Federal Agency Actions on Proposed Highways in Alaska

Science.gov (United States)

2010-11-17

... time period of less than 180 days for filing such claim, then that shorter time period still applies... Road. Existing frontage roads would be improved, and the existing 10-foot wide pedestrian pathway would be reconstructed and/or relocated as necessary. The project also includes construction of two bridges...

NPP construction cost in Canada

International Nuclear Information System (INIS)

Gorshkov, A.L.

1988-01-01

The structure of capital costs during NPP construction in Canada is considered. Capital costs comprise direct costs (cost of the ground and ground rights, infrastructure, reactor equipment, turbogenerators, electrotechnical equipment, auxiliary equipment), indirect costs (construction equipment and services, engineering works and management services, insurance payments, freight, training, operating expenditures), capital per cents for the period of construction and cost of heavy water storages. It proceeds from the analysis of the construction cost structure for a NPP with the CANDU reactor of unit power of 515, 740 and 880 MW, that direct costs make up on the average 62%

High lung cancer surgical procedure volume is associated with shorter length of stay and lower risks of re-admission and death

DEFF Research Database (Denmark)

Møller, Henrik; Riaz, Sharma P; Holmberg, Lars

2016-01-01

It is debated whether treating cancer patients in high-volume surgical centres can lead to improvement in outcomes, such as shorter length of hospital stay, decreased frequency and severity of post-operative complications, decreased re-admission, and decreased mortality. The dataset for this anal......It is debated whether treating cancer patients in high-volume surgical centres can lead to improvement in outcomes, such as shorter length of hospital stay, decreased frequency and severity of post-operative complications, decreased re-admission, and decreased mortality. The dataset...... to their geographical population. Higher volume hospitals had shorter length of stay and the odds of re-admission were 15% lower in the highest hospital volume quintile compared with the lowest quintile. Mortality risks were 1% after 30 d and 3% after 90 d. Patients from hospitals in the highest volume quintile had...

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-06-26

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF.

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF

Superoutburst of a New Sub-Period-Minimum Dwarf Nova CSS130418 in Hercules

Directory of Open Access Journals (Sweden)

D. Chochol

2015-02-01

Full Text Available Multicolour photometry of a new dwarf nova CSS130418 in Hercules, which underwent superoutburst on April 18, 2013, allow to classified it as a WZ Sge-type dwarf nova. The phase light curves for different stages of superoutburst are presented. The early superhumps were used to determine the orbital period Porb = 64.84(1 minutes, which is shorter than the period minimum ~78 minutes for normal hydrogen-rich cataclysmic variables. We found the mean period of ordinary superhumps Psh = 65.559(1 minutes. The quiescent spectrum is rich in helium, showing double peaked emissionlines of H I and He I from accretion disk, so the dwarf nova is in a late stage of stellar evolution.

Analysis of nuclear power plant construction costs

International Nuclear Information System (INIS)

1986-01-01

The objective of this report is to present the results of a statistical analysis of nuclear power plant construction costs and lead-times (where lead-time is defined as the duration of the construction period), using a sample of units that entered construction during the 1966-1977 period. For more than a decade, analysts have been attempting to understand the reasons for the divergence between predicted and actual construction costs and lead-times. More importantly, it is rapidly being recognized that the future of the nuclear power industry rests precariously on an improvement in the cost and lead-time situation. Thus, it is important to study the historical information on completed plants, not only to understand what has occurred to also to improve the ability to evaluate the economics of future plants. This requires an examination of the factors that have affected both the realized costs and lead-times and the expectations about these factors that have been formed during the construction process. 5 figs., 22 tabs

Analysis of nuclear power plant construction costs

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

The objective of this report is to present the results of a statistical analysis of nuclear power plant construction costs and lead-times (where lead-time is defined as the duration of the construction period), using a sample of units that entered construction during the 1966-1977 period. For more than a decade, analysts have been attempting to understand the reasons for the divergence between predicted and actual construction costs and lead-times. More importantly, it is rapidly being recognized that the future of the nuclear power industry rests precariously on an improvement in the cost and lead-time situation. Thus, it is important to study the historical information on completed plants, not only to understand what has occurred to also to improve the ability to evaluate the economics of future plants. This requires an examination of the factors that have affected both the realized costs and lead-times and the expectations about these factors that have been formed during the construction process. 5 figs., 22 tabs.

The Sensitivity of Income Polarization - Time, length of accounting periods, equivalence scales, and income definitions

DEFF Research Database (Denmark)

Azhar, Hussain

This study looks at polarization and its components’ sensitivity to assumptions about equivalence scales, income definition, ethical income distribution parameters, and the income accounting period. A representative sample of Danish individual incomes from 1984 to 2002 is utilised. Results show...... that polarization has increased over time, regardless of the applied measure, when the last part of the period is compared to the first part of the period. Primary causes being increased inequality (alienation) and faster income growth among high incomes relative to those in the middle of the distribution....... Increasing the accounting period confirms the reduction in inequality found for shorter periods, but polarization is virtually unchanged, because income group identification increases. Applying different equivalence scales does not change polarization ranking for different years, but identification ranks...

On almost-periodic points of a topological Markov chain

International Nuclear Information System (INIS)

Bogatyi, Semeon A; Redkozubov, Vadim V

2012-01-01

We prove that a transitive topological Markov chain has almost-periodic points of all D-periods. Moreover, every D-period is realized by continuously many distinct minimal sets. We give a simple constructive proof of the result which asserts that any transitive topological Markov chain has periodic points of almost all periods, and study the structure of the finite set of positive integers that are not periods.

ALGORITHMIC CONSTRUCTION SCHEDULES IN CONDITIONS OF TIMING CONSTRAINTS

Directory of Open Access Journals (Sweden)

Alexey S. Dobrynin

2014-01-01

Full Text Available Tasks of time-schedule construction (JSSP in various fields of human activities have an important theoretical and practical significance. The main feature of these tasks is a timing requirement, describing allowed planning time periods and periods of downtime. This article describes implementation variations of the work scheduling algorithm under timing requirements for the tasks of industrial time-schedules construction, and service activities.

Periods and Nori motives

CERN Document Server

Huber, Annette

2017-01-01

This book casts the theory of periods of algebraic varieties in the natural setting of Madhav Nori’s abelian category of mixed motives. It develops Nori’s approach to mixed motives from scratch, thereby filling an important gap in the literature, and then explains the connection of mixed motives to periods, including a detailed account of the theory of period numbers in the sense of Kontsevich-Zagier and their structural properties. Period numbers are central to number theory and algebraic geometry, and also play an important role in other fields such as mathematical physics. There are long-standing conjectures about their transcendence properties, best understood in the language of cohomology of algebraic varieties or, more generally, motives. Readers of this book will discover that Nori’s unconditional construction of an abelian category of motives (over fields embeddable into the complex numbers) is particularly well suited for this purpose. Notably, Kontsevich's formal period algebra represents a to...

Reprint Series: Geometric Constructions. RS-10.

Science.gov (United States)

Schaaf, William L., Ed.

This is one in a series of SMSG supplementary and enrichment pamphlets for high school students. The series makes available expository articles which appeared in a variety of mathematical periodicals. Topics covered include: (1) Euclidean constructions; (2) the geometry of the fixed compass; (3) certain topics related to constructions with…

Construction and testing of JT-60

International Nuclear Information System (INIS)

Kishimoto, H.; Aikawa, H.; Oikawa, A.; Miya, N.; Suzuki, K.; Ozeki, T.; Tokutake, T.; Kunieda, S.; Hiruta, K.; Hosoda, R.

1987-01-01

The JT-60 project is reviewed in terms of design, R and D, construction, commissioning and project management. Design features of JT-60 have been refined and renewed through periodic assessments. Engineering targets have been achieved by R and D efforts. Construction and commissioning have progressed on schedule with intensive project management and control. JT-60 obtained high performance and has entered into the experimental phase after completion of machine construction. (orig.)

76 FR 54288 - Notice of Final Federal Agency Actions on Proposed Bridge and Approach Roadways in Nevada and...

Science.gov (United States)

2011-08-31

... construction of a new bridge (two general- purpose lanes in each direction and a multi-use pathway) over the... the Federal law that authorizes judicial review of a claim provides a time period less than 180 days for filing such claim, then that shorter time period still applies. FOR FURTHER INFORMATION CONTACT...

Japanese experience in nuclear power plant construction

International Nuclear Information System (INIS)

Seko, T.

1989-01-01

Development of LWR in JAPAN started by introducing LWR from the U.S.A. Since then we have been improving existing technology and promoting domestic technology development based on experiences accumulated in Japan. As a result, recent operating performance has been excellent. As far as construction work is concerned, we also have been making our best efforts to improve the performance of construction work itself, with the cooperation of manufacturers. As for construction work, we have succeeded in improving the quality of construction work, shortening the construction period and reducing construction costs through new technology and Japanese-style work management

Periodic and quasiperiodic revivals in periodically driven interacting quantum systems

Science.gov (United States)

Luitz, David J.; Lazarides, Achilleas; Bar Lev, Yevgeny

2018-01-01

Recently it has been shown that interparticle interactions generically destroy dynamical localization in periodically driven systems, resulting in diffusive transport and heating. In this Rapid Communication we rigorously construct a family of interacting driven systems which are dynamically localized and effectively decoupled from the external driving potential. We show that these systems exhibit tunable periodic or quasiperiodic revivals of the many-body wave function and thus of all physical observables. By numerically examining spinless fermions on a one-dimensional lattice we show that the analytically obtained revivals of such systems remain stable for finite systems with open boundary conditions while having a finite lifetime in the presence of static spatial disorder. We find this lifetime to be inversely proportional to the disorder strength.

Application of value engineering technique in construction project

International Nuclear Information System (INIS)

Chen Changbing

2003-01-01

The author introduces how to apply the theories and methods of the value engineering in construction project. In the construction of a test device of the thermal hydrodynamic process, the authors have greatly reduced the construction cost and shortened the construction period by using the value engineering analyzing method. The application of value engineering in the project management is innovative. This practice indicates that the value engineering is important in many construction projects

Cross-sectional Internet-based survey of Japanese permanent daytime workers' sleep and daily rest periods.

Science.gov (United States)

Ikeda, Hiroki; Kubo, Tomohide; Sasaki, Takeshi; Liu, Xinxin; Matsuo, Tomoaki; So, Rina; Matsumoto, Shun; Yamauchi, Takashi; Takahashi, Masaya

2018-05-25

This study aimed to describe the sleep quantity, sleep quality, and daily rest periods (DRPs) of Japanese permanent daytime workers. Information about the usual DRP, sleep quantity, and sleep quality (Japanese version of the Pittsburgh Sleep Quality Index: PSQI-J) of 3,867 permanent daytime workers in Japan was gathered through an Internet-based survey. This information was analyzed and divided into the following eight DRP groups: <10, 10, 11, 12, 13, 14, 15, and ≥16 h. The sleep durations for workers in the <10, 10, 11, 12, 13, 14, 15, and ≥16 h DRP groups were found to be 5.3, 5.9, 6.1, 6.3, 6.5, 6.7, 6.7, and 6.9 h, respectively. The trend analysis revealed a significant linear trend as the shorter the DRP, the shorter was the sleep duration. The PSQI-J scores for the <10, 10, 11, 12, 13, 14, 15, and ≥16 h DRP groups were 7.1, 6.7, 6.7, 6.3, 6.0 (5.999), 5.6, 5.2, and 5.2, respectively. The trend analysis revealed a significant linear trend as the shorter the DRP, the lower was the sleep quality. This study described sleep quantity, sleep quality, and DRP in Japanese daytime workers. It was found that a shorter DRP was associated with poorer sleep quantity as well as quality.

State updating and calibration period selection to improve dynamic monthly streamflow forecasts for an environmental flow management application

Science.gov (United States)

Gibbs, Matthew S.; McInerney, David; Humphrey, Greer; Thyer, Mark A.; Maier, Holger R.; Dandy, Graeme C.; Kavetski, Dmitri

2018-02-01

Monthly to seasonal streamflow forecasts provide useful information for a range of water resource management and planning applications. This work focuses on improving such forecasts by considering the following two aspects: (1) state updating to force the models to match observations from the start of the forecast period, and (2) selection of a shorter calibration period that is more representative of the forecast period, compared to a longer calibration period traditionally used. The analysis is undertaken in the context of using streamflow forecasts for environmental flow water management of an open channel drainage network in southern Australia. Forecasts of monthly streamflow are obtained using a conceptual rainfall-runoff model combined with a post-processor error model for uncertainty analysis. This model set-up is applied to two catchments, one with stronger evidence of non-stationarity than the other. A range of metrics are used to assess different aspects of predictive performance, including reliability, sharpness, bias and accuracy. The results indicate that, for most scenarios and metrics, state updating improves predictive performance for both observed rainfall and forecast rainfall sources. Using the shorter calibration period also improves predictive performance, particularly for the catchment with stronger evidence of non-stationarity. The results highlight that a traditional approach of using a long calibration period can degrade predictive performance when there is evidence of non-stationarity. The techniques presented can form the basis for operational monthly streamflow forecasting systems and provide support for environmental decision-making.

Hereditary angioedema attacks resolve faster and are shorter after early icatibant treatment.

Directory of Open Access Journals (Sweden)

Marcus Maurer

Full Text Available BACKGROUND: Attacks of hereditary angioedema (HAE are unpredictable and, if affecting the upper airway, can be lethal. Icatibant is used for physician- or patient self-administered symptomatic treatment of HAE attacks in adults. Its mode of action includes disruption of the bradykinin pathway via blockade of the bradykinin B(2 receptor. Early treatment is believed to shorten attack duration and prevent severe outcomes; however, evidence to support these benefits is lacking. OBJECTIVE: To examine the impact of timing of icatibant administration on the duration and resolution of HAE type I and II attacks. METHODS: The Icatibant Outcome Survey is an international, prospective, observational study for patients treated with icatibant. Data on timings and outcomes of icatibant treatment for HAE attacks were collected between July 2009-February 2012. A mixed-model of repeated measures was performed for 426 attacks in 136 HAE type I and II patients. RESULTS: Attack duration was significantly shorter in patients treated <1 hour of attack onset compared with those treated ≥ 1 hour (6.1 hours versus 16.8 hours [p<0.001]. Similar significant effects were observed for <2 hours versus ≥ 2 hours (7.2 hours versus 20.2 hours [p<0.001] and <5 hours versus ≥ 5 hours (8.0 hours versus 23.5 hours [p<0.001]. Treatment within 1 hour of attack onset also significantly reduced time to attack resolution (5.8 hours versus 8.8 hours [p<0.05]. Self-administrators were more likely to treat early and experience shorter attacks than those treated by a healthcare professional. CONCLUSION: Early blockade of the bradykinin B(2 receptor with icatibant, particularly within the first hour of attack onset, significantly reduced attack duration and time to attack resolution.

Shorter Fallow Cycles Affect the Availability of Noncrop Plant Resources in a Shifting Cultivation System

Directory of Open Access Journals (Sweden)

Sarah Paule. Dalle

2006-12-01

Full Text Available Shifting cultivation systems, one of the most widely distributed forms of agriculture in the tropics, provide not only crops of cultural significance, but also medicinal, edible, ritual, fuel, and forage resources, which contribute to the livelihoods, health, and cultural identity of local people. In many regions across the globe, shifting cultivation systems are undergoing important changes, one of the most pervasive being a shortening of the fallow cycle. Although there has been much attention drawn to declines in crop yields in conjunction with reductions in fallow times, little if any research has focused on the dynamics of noncrop plant resources. In this paper, we use a data set of 26 fields of the same age, i.e., ~1.5 yr, but differing in the length and frequency of past fallow cycles, to examine the impact of shorter fallow periods on the availability of noncrop plant resources. The resources examined are collected in shifting cultivation fields by the Yucatec Maya in Quintana Roo, Mexico. These included firewood, which is cut from remnant trees and stumps spared at the time of felling, and 17 forage species that form part of the weed vegetation. Firewood showed an overall decrease in basal area with shorter fallow cycles, which was mostly related to the smaller diameter of the spared stumps and trees in short-fallow milpas. In contrast, forage species showed a mixed response. Species increasing in abundance in short-fallow milpas tended to be short-lived herbs and shrubs often with weedy habits, whereas those declining in abundance were predominantly pioneer trees and animal-dispersed species. Coppicing tree species showed a neutral response to fallow intensity. Within the cultural and ecological context of our study area, we expect that declines in firewood availability will be most significant for livelihoods because of the high reliance on firewood for local fuel needs and the fact that the main alternative source of firewood, forest

How Do Earth-Sized, Short-Period Planets Form?

Science.gov (United States)

Kohler, Susanna

2017-08-01

Matching theory to observation often requires creative detective work. In a new study, scientists have used a clever test to reveal clues about the birth of speedy, Earth-sized planets.Former Hot Jupiters?Artists impression of a hot Jupiter with an evaporating atmosphere. [NASA/Ames/JPL-Caltech]Among the many different types of exoplanets weve observed, one unusual category is that of ultra-short-period planets. These roughly Earth-sized planets speed around their host stars at incredible rates, with periods of less than a day.How do planets in this odd category form? One popular theory is that they were previously hot Jupiters, especially massive gas giants orbiting very close to their host stars. The close orbit caused the planets atmospheres to be stripped away, leaving behind only their dense cores.In a new study, a team of astronomers led by Joshua Winn (Princeton University) has found a clever way to test this theory.Planetary radius vs. orbital period for the authors three statistical samples (colored markers) and the broader sample of stars in the California Kepler Survey. [Winn et al. 2017]Testing MetallicitiesStars hosting hot Jupiters have an interesting quirk: they typically have metallicities that are significantly higher than an average planet-hosting star. It is speculated that this is because planets are born from the same materials as their host stars, and hot Jupiters require the presence of more metals to be able to form.Regardless of the cause of this trend, if ultra-short-period planets are in fact the solid cores of former hot Jupiters, then the two categories of planets should have hosts with the same metallicity distributions. The ultra-short-period-planet hosts should therefore also be weighted to higher metallicities than average planet-hosting stars.To test this, the authors make spectroscopic measurements and gather data for a sample of stellar hosts split into three categories:64 ultra-short-period planets (orbital period shorter than a

Paving the Way Towards Reactive Planar Spanner Construction in Wireless Networks

Science.gov (United States)

Frey, Hannes; Rührup, Stefan

A spanner is a subgraph of a given graph that supports the original graph's shortest path lengths up to a constant factor. Planar spanners and their distributed construction are of particular interest for geographic routing, which is an efficient localized routing scheme for wireless ad hoc and sensor networks. Planarity of the network graph is a key criterion for guaranteed delivery, while the spanner property supports efficiency in terms of path length. We consider the problem of reactive local spanner construction, where a node's local topology is determined on demand. Known message-efficient reactive planarization algorithms do not preserve the spanner property, while reactive spanner constructions with a low message overhead have not been described so far. We introduce the concept of direct planarization which may be an enabler of efficient reactive spanner construction. Given an edge, nodes check for all incident intersecting edges a certain geometric criterion and withdraw the edge if this criterion is not satisfied. We use this concept to derive a generic reactive topology control mechanism and consider two geometric criteria. Simulation results show that direct planarization increases the performance of localized geographic routing by providing shorter paths than existing reactive approaches.

Investigations of model polymers: Dynamics of melts and statics of a long chain in a dilute melt of shorter chains

International Nuclear Information System (INIS)

Bishop, M.; Ceperley, D.; Frisch, H.L.; Kalos, M.H.

1982-01-01

We report additional results on a simple model of polymers, namely the diffusion in concentrated polymer systems and the static properties of one long chain in a dilute melt of shorter chains. It is found, for the polymer sizes and time scales amenable to our computer calculations, that there is as yet no evidence for a ''reptation'' regime in a melt. There is some indication of reptation in the case of a single chain moving through fixed obstacles. No statistically significant effect of the change, from excluded volume behavior of the long chain to ideal behavior as the shorter chains grow, is observed

STIMULATION OF CONSTRUCTION OF AFFORDABLE HOUSING BY REFORMATION OF A CONSTRUCTION COMPLEX MANAGEMENT SYSTEM

Directory of Open Access Journals (Sweden)

BRONEVYTSKYI S. P.

2015-10-01

Full Text Available Purpose. Development of offers on stimulation of construction of affordable housing by reformation of a construction complex management system. Methodology. The revelation of the problems of planning of construction in large cities. The analysis of forming of structure of a build complex management in soviet times and in a transitional period. The revelation of the modern, actual, socio-economic problems of the construction activity management. Proposition on the improvement of methods of construction management in cities of Ukraine. Results. The methods of a construction complex management in countries with a market economy as for building of affordable housing are shown. Originality. In composition of a town-planning documentations, except for the norms of the common use of territories of city (density of population of micro region, the maximum parameters of a construction examining of land areas are proposed to determine: building percent and coefficient of maximum superficial area. Practical value. The principle of management and organization of construction is norms of a build use of territories for building of mass affordable housing for funds of population and investors while providing of the comfort of housing in accordance with state construction norms.

The ACR: Advanced design features for a short construction schedule

International Nuclear Information System (INIS)

Elgohary, M.; Fairclough, N.

2003-01-01

Building on the successful CANDU construction at Qinshan, the ACR-700 is designed with constructability considerations as a major requirement during all project phases from the concept design stage to the detail design stage. A project schedule of 48 months has been developed for the nth ACR unit with a 36 months construction period from First Concrete to Fuel Load. This paper describes some of the advanced design features implemented in the reactor building design in order to achieve this short construction period. These features include large volume concrete pours, prefabricated rebar, composite structures, prefabricated permanent formwork and significant modularization and prefabrication

Association of mutations in the hemochromatosis gene with shorter life expectancy

DEFF Research Database (Denmark)

Bathum, L; Christiansen, L; Nybo, H

2001-01-01

BACKGROUND: To investigate whether the frequency of carriers of mutations in the HFE gene associated with hereditary hemochromatosis diminishes with age as an indication that HFE mutations are associated with increased mortality. It is of value in the debate concerning screening for hereditary...... hemochromatosis to determine the significance of heterozygosity. METHODS: Genotyping for mutations in exons 2 and 4 of the HFE gene using denaturing gradient gel electrophoresis in 1784 participants aged 45 to 100 years from 4 population-based studies: all 183 centenarians from the Danish Centenarian Study, 601...... in the distribution of mutations in exon 2 in the different age groups. CONCLUSIONS: In a high-carrier frequency population like Denmark, mutations in HFE show an age-related reduction in the frequency of heterozygotes for C282Y, which suggests that carrier status is associated with shorter life expectancy....

NPP Krsko Periodic Safety Review action plan

International Nuclear Information System (INIS)

Bilic Zabric, T.

2006-01-01

In the current, internationally accepted, safety philosophy Periodic Safety Reviews (PSRs) are comprehensive reviews aimed at the verification that an operating NPP remains safe when judged against current safety objectives and practices and that adequate arrangements are in place to maintain an acceptable level of safety. These reviews are complementary to the routine and special safety reviews. They are long time-scale reviews intended to deal with the cumulative effects of plant ageing, modifications, operating experience and technical developments, which are not so easily comprehended over the shorter time-scale routine of safety reviews. The review was completed in 2005 and the next period will see the implementation of the action plan including some plant upgrades. The action plan lists issues that should be implemented at NPP Krsko together with associated milestones. The milestones were assumed based on best estimate resource availability and their ends can be potentially floated. In some cases, multiple corrective measures may be postulated to provide resolution for a given safety issue. The Slovenian Nuclear Safety Administration by decree approved the first periodic safety review and the implementation plan of activities arising from it. The entire implementation plan must be carried out by 15 October 2010. Report on the second periodic safety review must be submitted by the NEK not later than 15 December 2013. (author)

Is equity confined to the shorter term projects - and if not, what does it need?

International Nuclear Information System (INIS)

Cryan, T.

1996-01-01

There are two types of equity investor generally found in shorter term energy projects: energy project developers or sponsors who view a given project as buying or building a business; and financial investors who have viewed an investment as buying a stream of cash flows. This article examines the objectives and needs of these two investor groups, and discusses the principal issues which govern their respective decision-making process. (author)

A novel methodology to estimate the evolution of construction waste in construction sites.

Science.gov (United States)

Katz, Amnon; Baum, Hadassa

2011-02-01

This paper focuses on the accumulation of construction waste generated throughout the erection of new residential buildings. A special methodology was developed in order to provide a model that will predict the flow of construction waste. The amount of waste and its constituents, produced on 10 relatively large construction sites (7000-32,000 m(2) of built area) was monitored periodically for a limited time. A model that predicts the accumulation of construction waste was developed based on these field observations. According to the model, waste accumulates in an exponential manner, i.e. smaller amounts are generated during the early stages of construction and increasing amounts are generated towards the end of the project. The total amount of waste from these sites was estimated at 0.2m(3) per 1m(2) floor area. A good correlation was found between the model predictions and actual data from the field survey. Copyright © 2010 Elsevier Ltd. All rights reserved.

Construction training process of highly skilled players in mini-football for competition period

Directory of Open Access Journals (Sweden)

Stasiuk I.I.

2013-08-01

Full Text Available Analyzed the structure and content of the competition period in mini-football. It was determined that the structure of the competition period consists of 4 competitive mesocycles. In each mesocycle includes various types of micro-cycles (competitive, cross-game and rehabilitation. Reflects the ratio of specific and non-specific (general preparations means training work. So in the competitive period for competitive mesocycles general preparations exercises ranged from 38.3 to 42.4%, special-preparation - from 29.9 to 32.6%, competitive - from 20.9 to 23.3%. The intensity of the training load in intergame microcycles less than competitive. This corresponds to the strategy of building the training process in the competitive period. During the competition period the ratio of the training load was: aerobic focus - 49.2%, mixed - 46.1%, anaerobic alactate - 2.4%, anaerobic glycolytic - 2.3%. Defines the scope and focus of the training load: longer the aerobic work, then - mixed, anaerobic- alactate and anaerobic-glycolytic. The comparative characteristics of the intensity of the training load in competitive and intergame microcycles.

Design of Long Period Pseudo-Random Sequences from the Addition of -Sequences over

Directory of Open Access Journals (Sweden)

Ren Jian

2004-01-01

Full Text Available Pseudo-random sequence with good correlation property and large linear span is widely used in code division multiple access (CDMA communication systems and cryptology for reliable and secure information transmission. In this paper, sequences with long period, large complexity, balance statistics, and low cross-correlation property are constructed from the addition of -sequences with pairwise-prime linear spans (AMPLS. Using -sequences as building blocks, the proposed method proved to be an efficient and flexible approach to construct long period pseudo-random sequences with desirable properties from short period sequences. Applying the proposed method to , a signal set is constructed.

Application of Multi-Valued Weighting Logical Functions in the Analysis of a Degree of Importance of Construction Parameters on the Example of Hydraulic Valves

Science.gov (United States)

Deptuła, A.

2014-08-01

In the optimization process, changes in the construction parameters value influence the behaviour of functions depending on time. Weighting logical coefficients for the stabilisation time are taken into consideration here, i.e., a shorter (better) stabilisation time has a more important (bigger) value of the weighting coefficient. An example of applying weighting logical functions in the analysis of a degree of importance of construction parameters of a hydraulic valve is presented in the paper

Toward an Organic Chemist's Periodic Table.

Science.gov (United States)

Hall, H. K., Jr.

1980-01-01

An analogy between electron transfer reactions of the elements and those of organic molecules is offered. Examples of organic electron transfer reactions are presented. The rationale of constructing an organic chemists' periodic table is also discussed. (HM)

Shorter preschool, leukocyte telomere length is associated with obesity at age 9 in Latino children.

Science.gov (United States)

Kjaer, T W; Faurholt-Jepsen, D; Mehta, K M; Christensen, V B; Epel, E; Lin, J; Blackburn, E; Wojcicki, J M

2018-04-01

The aim of this study was to determine the potential role of leukocyte telomere length as a biomarker for development of childhood obesity in a low-income Latino population. A birth cohort of Latino children (N = 201) in San Francisco (recruited May 2006-May 2007) was followed until age 9 and assessed annually for obesity and dietary intake. Leukocyte telomere length was measured at 4 and 5 years (n = 102) and assessed as a predictor for obesity at age 9, adjusting for known risk factors. Furthermore, leukocyte telomere length at age 4 and 5 was evaluated as a possible mediator of the relationship between excessive sugar-sweetened beverage consumption and obesity at age 9. Shorter leukocyte telomere length in preschoolers was associated with obesity at age 9 (adjusted odds ratio 0.35, 95% confidence interval 0.13-0.94) after adjustment for known risk factors. Telomere length mediated 11% of the relationship between excessive sugar-sweetened beverage consumption and obesity. Shorter leukocyte telomere length may be an indicator of future obesity risk in high-risk populations as it is particularly sensitive to damage from oxidative stress exposure, including those from sugar-sweetened beverages. © 2017 World Obesity Federation.

Are Shorter Versions of the Positive and Negative Syndrome Scale (PANSS) Doable? A Critical Review.

Science.gov (United States)

Lindenmayer, Jean-Pierre

2017-12-01

The Positive and Negative Syndrome Scale (PANSS) is a well-established assessment tool for measuring symptom severity in schizophrenia. Researchers and clinicians have been interested in the development of a short version of the PANSS that could reduce the burden of its administration for patients and raters. The author presents a comprehensive overview of existing brief PANSS measures, including their strengths and limitations, and discusses some possible next steps. There are two available scales that offer a reduced number of original PANSS items: PANSS-14 and PANSS-19; and two shorter versions that include six items: Brief PANSS and PANSS-6. The PANSS-6 has been tested quite extensively in established trials and appears to demonstrate high sensitivity to change and an established cut off definition for remission. Prospective testing in new antipsychotic treatment trials is still required for these shorter versions of PANSS. In addition, they need to be supplemented with interview guides, as well as provide conversion formulas to translate total scores from the short PANSS versions to the PANSS-30. Both short versions of the PANSS are essentially designed to evaluate response to antipsychotic treatment. Future PANSS scale development needs to address specific measurement of treatment-responsive positive symptoms by including treatment-sensitive items, as well as illness-phase specific PANSS tools.

Pairs of dual periodic frames

DEFF Research Database (Denmark)

Christensen, Ole; Goh, Say Song

2012-01-01

The time–frequency analysis of a signal is often performed via a series expansion arising from well-localized building blocks. Typically, the building blocks are based on frames having either Gabor or wavelet structure. In order to calculate the coefficients in the series expansion, a dual frame...... is needed. The purpose of the present paper is to provide constructions of dual pairs of frames in the setting of the Hilbert space of periodic functions L2(0,2π). The frames constructed are given explicitly as trigonometric polynomials, which allows for an efficient calculation of the coefficients...

Periodically driven random quantum spin chains: real-space renormalization for Floquet localized phases

Science.gov (United States)

Monthus, Cécile

2017-07-01

When random quantum spin chains are submitted to some periodic Floquet driving, the eigenstates of the time-evolution operator over one period can be localized in real space. For the case of periodic quenches between two Hamiltonians (or periodic kicks), where the time-evolution operator over one period reduces to the product of two simple transfer matrices, we propose a block-self-dual renormalization procedure to construct the localized eigenstates of the Floquet dynamics. We also discuss the corresponding strong disorder renormalization procedure, that generalizes the RSRG-X procedure to construct the localized eigenstates of time-independent Hamiltonians.

Construct ability Improvement for Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Lee, Dae Soo; Lee, Jong Rim; Kim, Jong Ku [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

1997-12-31

The purpose of this study was to identify methods for improving the construct ability of nuclear power plants. This study reviewed several references of current construction practices of domestic and overseas nuclear plants in order to identify potential methods for improving construct ability. The identified methods for improving construct ability were then evaluated based on the applicability to domestic nuclear plant construction. The selected methods are expected to reduce the construction period, improve the quality of construction, cost, safety, and productivity. Selection of which methods should be implemented will require further evaluation of construction modifications, design changes, contract revisions. Among construction methods studied, platform construction methods can be applied through construction sequence modification without significant design changes, and Over the Top construction method of the NSSS, automatic welding of RCL pipes, CLP modularization, etc., are considered to be applied after design modification and adjustment of material lead time. (author). 49 refs., figs., tabs.

Impact of modules on the ACR construction schedule

International Nuclear Information System (INIS)

Choy, Ed; Elgohary, Medhat; Fairclough, Neville; Yu, Stephen; Murayama, Kouichi; Miura, Jun; Kawahata, Junichi

2003-01-01

The ACR (Advanced CANDU Reactor), developed by Atomic Energy of Canada Ltd. (AECL), is designed with constructability considerations as a major requirement during all project phases from the concept design stage to the detail design stage. For ACR-700, a project schedule of 48 months has been developed for the nth replicated unit with a 36 month construction period duration from First Concrete to Fuel Load. AECL, recognizing the immense benefit of collective experience, is partnering with Hitachi Ltd in the development of the ACR power plant design. AECL has gained valuable experience in implementing new construction methods at the Qinshan (Phase III) twin unit CANDU 6 plant in China, and Hitachi likewise has enjoyed success in modular construction of ABWRs in Japan. Utilizing these experiences, AECL is developing the ACR nuclear steam plant (NSP) and Hitachi is developing the Turbine Building. An overall construction strategy, which builds on the success of these construction methods from the nuclear power plant developments in China and Japan, has been developed for the ACR. The overall construction strategy comprises the 'Open Top' construction technique using a Very Heavy Lift crane, parallel construction activities, with extensive modularization and prefabrication. Modules and prefabrications are major features of the ACR design, resulting in an excess of 80% of Reactor Building internal work being completed as modules or as very streamlined traditional construction. This paper reviews the ACR construction strategy and provides examples of modules and how they impact on the ACR construction schedule. In conclusion, the ACR-700 is designed using the latest, proven construction methods to achieve a 36 month construction period for the nth replicated unit. (author)

Advanced construction methods for new nuclear power plants

International Nuclear Information System (INIS)

Bilbao y Leon, Sama; Cleveland, John; Moon, Seong-Gyun; Tyobeka, Bismark

2009-01-01

The length of the construction and commissioning phases of nuclear power plants have historically been longer than for conventional fossil fuelled plants, often having a record of delays and cost overruns as a result from several factors including legal interventions and revisions of safety regulations. Recent nuclear construction projects however, have shown that long construction periods for nuclear power plants are no longer the norm. While there are several inter-related factors that influence the construction time, the use of advanced construction techniques has contributed significantly to reducing the construction length of recent nuclear projects. (author)

Minimally invasive oesophagectomy more expensive than open despite shorter length of stay.

Science.gov (United States)

Dhamija, Anish; Dhamija, Ankit; Hancock, Jacquelyn; McCloskey, Barbara; Kim, Anthony W; Detterbeck, Frank C; Boffa, Daniel J

2014-05-01

The minimally invasive oesophagectomy (MIO) approach offers a number of advantages over open approaches including reduced discomfort, shorter length of stay and a faster recovery to baseline status. On the other hand, minimally invasive procedures typically are longer and consume greater disposable instrumentation, potentially resulting in a greater overall cost. The objective of this study was to compare costs associated with various oesophagectomy approaches for oesophageal cancer. An institutional Resource Information Management System (RIMS) was queried for cost data relating to hospital expenditures (as opposed to billings or collections). The RIMS was searched for patients undergoing oesophagectomy for oesophageal cancer between 2003 and 2012 via minimally invasive, open transthoracic (OTT) (including Ivor Lewis, modified McKeown or thoracoabdominal) or transhiatal approaches. Patients that were converted from minimally invasive to open, or involved hybrid procedures, were excluded. A total of 160 oesophagectomies were identified, including 61 minimally invasive, 35 open transthoracic and 64 transhiatal. Costs on the day of surgery averaged higher in the MIO group ($12 476 ± 2190) compared with the open groups, OTT ($8202 ± 2512, P < 0.0001) or OTH ($5809 ± 2575, P < 0.0001). The median costs associated with the entire hospitalization also appear to be higher in the MIO group ($25 935) compared with OTT ($24 440) and OTH ($15 248). The average length of stay was lowest in the MIO group (11 ± 9 days) compared with OTT (19 ± 18 days, P = 0.006) and OTH (18 ± 28 days P = 0.07). The operative mortality was similar in the three groups (MIO = 3%, OTT = 9% and OTH = 3%). The operating theatre costs associated with minimally invasive oesophagectomy are significantly higher than OTT or OTH approaches. Unfortunately, a shorter hospital stay after MIO does not consistently offset higher surgical expense, as total hospital costs trend higher in the MIO patients. In

Shorter telomeres in peripheral blood mononuclear cells from older persons with sarcopenia: results from an exploratory study

Directory of Open Access Journals (Sweden)

Emanuele eMarzetti

2014-08-01

Full Text Available Background. Telomere shortening in peripheral blood mononuclear cells (PBMCs has been associated with biological age and several chronic degenerative diseases. However, the relationship between telomere length and sarcopenia, a hallmark of the aging process, is unknown. The aim of the present study was therefore to determine whether PBMC telomeres obtained from sarcopenic older persons were shorter relative to non-sarcopenic peers. We further explored if PBMC telomere length was associated with frailty, a major clinical correlate of sarcopenia.Methods. Analyses were conducted in 142 persons aged >/= 65 years referred to a geriatric outpatient clinic (University Hospital. The presence of sarcopenia was established according to the European Working Group on Sarcopenia in Older People criteria, with bioelectrical impedance analysis used for muscle mass estimation. The frailty status was determined by both the Fried’s criteria (physical frailty, PF and a modified Rockwood’s frailty index (FI. Telomere length was measured in PBMCs by quantitative real-time polymerase chain reaction according to the Telomere/Single copy gene ratio (T/S method.Results. Among 142 outpatients (mean age 75.0 ± 6.5 years, 59.2% women, sarcopenia was diagnosed in 23 individuals (19.3%. The PF phenotype was detected in 74 participants (52.1%. The average FI score was 0.46 ± 0.17. PBMC telomeres were shorter in sarcopenic subjects (T/S = 0.21; 95% CI: 0.18 – 0.24 relative to non-sarcopenic individuals (T/S = 0.26; 95%: CI: 0.24 – 0.28; p = 0.01, independent of age, gender, smoking habit, or comorbidity. No significant associations were determined between telomere length and either PF or FI.Conclusion. PBMC telomere length, expressed as T/S values, is shorter in older outpatients with sarcopenia. The cross-sectional assessment of PBMC telomere length is not sufficient at capturing the complex, multidimensional syndrome of frailty.

Multidimensional periodic Schrödinger operator perturbation theory and applications

CERN Document Server

Veliev, Oktay

2015-01-01

The book describes the direct problems and the inverse problem of the multidimensional Schrödinger operator with a periodic potential. This concerns perturbation theory and constructive determination of the spectral invariants and finding the periodic potential from the given Bloch eigenvalues. The unique method of this book derives the asymptotic formulas for Bloch eigenvalues and Bloch functions for arbitrary dimension. Moreover, the measure of the iso-energetic surfaces in the high energy region is construct and estimated. It implies the validity of the Bethe-Sommerfeld conjecture for arbitrary dimensions and arbitrary lattices. Using the perturbation theory constructed in this book, the spectral invariants of the multidimensional operator from the given Bloch eigenvalues are determined. Some of these invariants are explicitly expressed by the Fourier coefficients of the potential. This way the possibility to determine the potential constructively by using Bloch eigenvalues as input data is given. In the ...

Incubation period and immune function: A comparative field study among coexisting birds

Science.gov (United States)

Palacios, M.G.; Martin, T.E.

2006-01-01

Developmental periods are integral components of life history strategies that can have important fitness consequences and vary enormously among organisms. However, the selection pressures and mechanisms causing variation in length of developmental periods are poorly understood. Particularly puzzling are prolonged developmental periods, because their selective advantage is unclear. Here we tested the hypotheses that immune function is stronger in species that are attacked at a higher rate by parasites and that prolonged embryonic development allows the development of this stronger immune system. Through a comparative field study among 12 coexisting passerine bird species, we show that species with higher blood parasite prevalence mounted stronger cellular immune responses than species with lower prevalence. These results provide support for the hypothesis that species facing greater selection pressure from parasites invest more in immune function. However, species with longer incubation periods mounted weaker cellular immune responses than species with shorter periods. Therefore, cellular immune responses do not support the hypothesis that longer development time enhances immunocompentence. Future studies should assess other components of the immune system and test alternative causes of variation in incubation periods among bird species. ?? Springer-Verlag 2005.

A Theory for the Incubation Period Following a Stress Reduction During Creep

DEFF Research Database (Denmark)

Bilde-Sørensen, Jørgen

1978-01-01

incubation period is much shorter than the time needed to establish an equilibrium structure at the new lower stress. The dependence of dislocation line tension upon line length is taken into account; as a result of this, recovery rates are predicted to depend on stress to a power larger than three......A dislocation model is presented for the phenomena following a stress reduction during creep. It is suggested that an incubation period for the production of new mobile dislocations arises because attractive junctions on the verge of breaking just before the stress reduction are no longer so after...... the stress reduction. The breaking stress of the junctions must be lowered by climb movements in the surrounding network before the junctions can break and release new mobile dislocations. On the basis of these concepts, an expression is derived for the length of the incubation period. This theoretical...

Solar wind plasma periodicities observed at 1 AU by IMP 8

Science.gov (United States)

Paularena, K. I.; Szabo, A.; Lazarus, A. J.

1995-01-01

The IMP 8 spacecraft has been in Earth orbit since 1973, gathering plasma data over one complete 22-year solar cycle. These data are being examined to look for periodicities at time scales ranging from several hours to the entire span of the data set. A 1.3-year periodicity in the radial speed observed by IMP 8 and Voyager 2 has already been reported for the years from 1987 to 1993. The periodogram method, useful for unevenly sampled data such as the IMP 8 plasma data, has been used to search for other periods. It is interesting to note that the 13-year period is not present in the out-of-the-ecliptic component of the velocity (Vz), although a 1-year period is very obvious both visually and on the periodogram. Both components show a very strong peak associated with the 11-year solar cycle variation. This work will be extended to the thermal speed (a measure of the wind's temperature) and density, although the frequent correlations between these parameters and the velocity are expected to cause similar results. Additionally, the fine resolution data will be examined for shorter time periods than are visible using the hourly average data which are appropriate for longer periods. A comparison with periods observed at other spacecraft may also be made.

Optimization of a shorter variable-acquisition time for legs to achieve true whole-body PET/CT images.

Science.gov (United States)

Umeda, Takuro; Miwa, Kenta; Murata, Taisuke; Miyaji, Noriaki; Wagatsuma, Kei; Motegi, Kazuki; Terauchi, Takashi; Koizumi, Mitsuru

2017-12-01

The present study aimed to qualitatively and quantitatively evaluate PET images as a function of acquisition time for various leg sizes, and to optimize a shorter variable-acquisition time protocol for legs to achieve better qualitative and quantitative accuracy of true whole-body PET/CT images. The diameters of legs to be modeled as phantoms were defined based on data derived from 53 patients. This study analyzed PET images of a NEMA phantom and three plastic bottle phantoms (diameter, 5.68, 8.54 and 10.7 cm) that simulated the human body and legs, respectively. The phantoms comprised two spheres (diameters, 10 and 17 mm) containing fluorine-18 fluorodeoxyglucose solution with sphere-to-background ratios of 4 at a background radioactivity level of 2.65 kBq/mL. All PET data were reconstructed with acquisition times ranging from 10 to 180, and 1200 s. We visually evaluated image quality and determined the coefficient of variance (CV) of the background, contrast and the quantitative %error of the hot spheres, and then determined two shorter variable-acquisition protocols for legs. Lesion detectability and quantitative accuracy determined based on maximum standardized uptake values (SUV max ) in PET images of a patient using the proposed protocols were also evaluated. A larger phantom and a shorter acquisition time resulted in increased background noise on images and decreased the contrast in hot spheres. A visual score of ≥ 1.5 was obtained when the acquisition time was ≥ 30 s for three leg phantoms, and ≥ 120 s for the NEMA phantom. The quantitative %errors of the 10- and 17-mm spheres in the leg phantoms were ± 15 and ± 10%, respectively, in PET images with a high CV (scan mean SUV max of three lesions using the current fixed-acquisition and two proposed variable-acquisition time protocols in the clinical study were 3.1, 3.1 and 3.2, respectively, which did not significantly differ. Leg acquisition time per bed position of even 30-90�

Absence of a Metallicity Effect for Ultra-short-period Planets

International Nuclear Information System (INIS)

Winn, Joshua N.; Sanchis-Ojeda, Roberto; Isaacson, Howard; Marcy, Geoffrey W.; Rogers, Leslie; Petigura, Erik A.; Howard, Andrew W.; Schlaufman, Kevin C.; Cargile, Phillip; Hebb, Leslie

2017-01-01

Ultra-short-period (USP) planets are a newly recognized class of planets with periods shorter than one day and radii smaller than about 2  R ⊕ . It has been proposed that USP planets are the solid cores of hot Jupiters that have lost their gaseous envelopes due to photo-evaporation or Roche lobe overflow. We test this hypothesis by asking whether USP planets are associated with metal-rich stars, as has long been observed for hot Jupiters. We find the metallicity distributions of USP-planet and hot-Jupiter hosts to be significantly different ( p = 3 × 10 −4 ) based on Keck spectroscopy of Kepler stars. Evidently, the sample of USP planets is not dominated by the evaporated cores of hot Jupiters. The metallicity distribution of stars with USP planets is indistinguishable from that of stars with short-period planets with sizes between 2 and 4  R ⊕ . Thus, it remains possible that the USP planets are the solid cores of formerly gaseous planets that are smaller than Neptune.

Absence of a Metallicity Effect for Ultra-short-period Planets

Energy Technology Data Exchange (ETDEWEB)

Winn, Joshua N. [Department of Astrophysical Sciences, Princeton University, 4 Ivy Lane, Princeton, NJ 08540 (United States); Sanchis-Ojeda, Roberto; Isaacson, Howard; Marcy, Geoffrey W. [Department of Astronomy, University of California, Berkeley, CA 94720 (United States); Rogers, Leslie [Department of Astronomy and Astrophysics, University of Chicago, 5640 South Ellis Avenue, Chicago, IL 60637 (United States); Petigura, Erik A.; Howard, Andrew W. [Department of Astronomy, California Institute of Technology, Pasadena, CA 91125 (United States); Schlaufman, Kevin C. [Department of Physics and Astronomy, Johns Hopkins University, Baltimore, MD 21218 (United States); Cargile, Phillip [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Hebb, Leslie [Hobart and William Smith Colleges, Geneva, NY 14456 (United States)

2017-08-01

Ultra-short-period (USP) planets are a newly recognized class of planets with periods shorter than one day and radii smaller than about 2  R {sub ⊕}. It has been proposed that USP planets are the solid cores of hot Jupiters that have lost their gaseous envelopes due to photo-evaporation or Roche lobe overflow. We test this hypothesis by asking whether USP planets are associated with metal-rich stars, as has long been observed for hot Jupiters. We find the metallicity distributions of USP-planet and hot-Jupiter hosts to be significantly different ( p = 3 × 10{sup −4}) based on Keck spectroscopy of Kepler stars. Evidently, the sample of USP planets is not dominated by the evaporated cores of hot Jupiters. The metallicity distribution of stars with USP planets is indistinguishable from that of stars with short-period planets with sizes between 2 and 4  R {sub ⊕}. Thus, it remains possible that the USP planets are the solid cores of formerly gaseous planets that are smaller than Neptune.

Improvement of the Management of Infants, Children and Adults with a Molecular Diagnosis of Enterovirus Meningitis during Two Observational Study Periods

Science.gov (United States)

Archimbaud, Christine; Ouchchane, Lemlih; Mirand, Audrey; Chambon, Martine; Demeocq, François; Labbé, André; Laurichesse, Henri; Schmidt, Jeannot; Clavelou, Pierre; Aumaître, Olivier; Regagnon, Christel; Bailly, Jean-Luc; Henquell, Cécile; Peigue-Lafeuille, Hélène

2013-01-01

Enteroviruses (EVs) are a major cause of aseptic meningitis, and RNA detection using molecular assay is the gold standard diagnostic test. The aim of this study was to assess the impact of an EV positive diagnosis on the clinical management of patients admitted for meningitis over the course of two observational study periods (2005 and 2008–09) in the same clinical departments. We further investigated in multivariate analysis various factors possibly associated with hospital length of stay (LOS) in all age groups (infants, children, and adults). The results showed an overall improvement in the management of patients (n = 142) between the study periods, resulting in a significantly shorter hospital LOS for adults and children, and a shorter duration of antibiotic use for adults and infants. In multivariate analysis, we observed that the time from molecular test results to discharge of patients and the median duration of antibiotic treatment were associated with an increase in LOS in all age groups. In addition, among adults, the turnaround time of the molecular assay was significantly correlated with LOS. The use of CT scan in children and hospital admission outside the peak of EV prevalence in infants tended to increase LOS. In conclusion, the shorter length of stay of patients with meningitis in this study was due to various factors including the rapidity of the EV molecular test (particularly in adults), greater physician responsiveness after a positive result (in adults and children), and greater experience on the part of physicians in handling EV meningitis, as evidenced by the shorter duration of antibiotic use in adults and infants. PMID:23874676

Improvement of the management of infants, children and adults with a molecular diagnosis of Enterovirus meningitis during two observational study periods.

Directory of Open Access Journals (Sweden)

Christine Archimbaud

Full Text Available Enteroviruses (EVs are a major cause of aseptic meningitis, and RNA detection using molecular assay is the gold standard diagnostic test. The aim of this study was to assess the impact of an EV positive diagnosis on the clinical management of patients admitted for meningitis over the course of two observational study periods (2005 and 2008-09 in the same clinical departments. We further investigated in multivariate analysis various factors possibly associated with hospital length of stay (LOS in all age groups (infants, children, and adults. The results showed an overall improvement in the management of patients (n = 142 between the study periods, resulting in a significantly shorter hospital LOS for adults and children, and a shorter duration of antibiotic use for adults and infants. In multivariate analysis, we observed that the time from molecular test results to discharge of patients and the median duration of antibiotic treatment were associated with an increase in LOS in all age groups. In addition, among adults, the turnaround time of the molecular assay was significantly correlated with LOS. The use of CT scan in children and hospital admission outside the peak of EV prevalence in infants tended to increase LOS. In conclusion, the shorter length of stay of patients with meningitis in this study was due to various factors including the rapidity of the EV molecular test (particularly in adults, greater physician responsiveness after a positive result (in adults and children, and greater experience on the part of physicians in handling EV meningitis, as evidenced by the shorter duration of antibiotic use in adults and infants.

Construction Worker Fatigue Prediction Model Based on System Dynamic

OpenAIRE

Wahyu Adi Tri Joko; Ayu Ratnawinanda Lila

2017-01-01

Construction accident can be caused by internal and external factors such as worker fatigue and unsafe project environment. Tight schedule of construction project forcing construction worker to work overtime in long period. This situation leads to worker fatigue. This paper proposes a model to predict construction worker fatigue based on system dynamic (SD). System dynamic is used to represent correlation among internal and external factors and to simulate level of worker fatigue. To validate...

Reduction of construction period by development and applying of advanced turbine generator foundation as composite structure

International Nuclear Information System (INIS)

Sekimoto, Hisashi; Fuyama, Hiroyuki; Kameda, Ichiro; Fukunaga, Yuuji; Umetada, Isao; Magoshi, Ryutaro

1999-01-01

Mitsubishi Heavy Industries developed a composite steel-concrete beam for constructing elevated horizontal beams for turbine-generator foundations. This system was used at the company's Verification Test Plant at the Takasago Machinery Works. Composite steel-concrete beams are made from U-shaped steel casings that acts as a temporarily formwork and are permanently used as major concrete beam reinforcement. Prefabricated U-shaped steel casings must be placed on top of vertical concrete columns. After steel casings are positioned and secured, concrete is filled. This technique cuts one month from construction time and simplifies required temporary work such as falsework and formwork. This paper details the results of practical research on design and construction as they relate to required strength and vibration. (author)

Relation between peak period of microtremor spectral ratio (horizontal and vertical components) and basement depth; Bido no suiheido/jogedo supekutoru hi no peak to kiso shindo tono kankei

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, H; Mizutani, K; Saito, T [Iwate University, Iwate (Japan). Faculty of Engineering

1996-05-01

The peak period of the horizontal/vertical spectral ratio of microtremors was referred to the underground structure for the purpose of finding out if it was possible to estimate the ground structure by use of the peak period of the spectral ratio. The observation was carried in the areas of Morioka City and Hachinohe City using seismographs for measuring east-west, north-south, and up-down motions. As for the relationship between the peak period of the spectral ratio distribution involving 490 observation sites and the known gravity anomalies in the Morioka City area, it was found that the peak period of the spectral ratio tended to be shorter from west toward east while the gravity anomalies were greater from west toward east. Again, as for the relations with the underground geology, the period was longer when the distance to the granite basement was greater, and shorter when smaller. In the Hachinohe City area, relations not only of the first period peak but also of the second period peak to the basement were disclosed, which indicates the possibility that the peak period of the spectral ratio will be used as a means for estimating the basement structure. 2 refs., 8 figs.

Non-periodic one-dimensional ideal conductors and integrable turbulence

Energy Technology Data Exchange (ETDEWEB)

Zakharov, Dmitry V. [Courant Institute of Mathematical Sciences, New York University, 251 Mercer Street, New York, NY, 10012 (United States); Zakharov, Vladimir E. [Department of Mathematics, University of Arizona, Tucson, AZ, 85791 (United States); Dyachenko, Sergey A., E-mail: sdyachen@math.uiuc.edu [Department of Mathematics, University of Illinois, Urbana-Champaign, IL, 61801 (United States)

2016-12-01

Highlights: • An efficient procedure for construction of non-periodic, non-vanishing reflectionless potentials is presented. • The analytical procedure is reinforced by numerical simulation that presents some of these potentials. • The present work is a key ingredient for the study of integrable turbulence and statistical description of “solitonic gas”. - Abstract: To relate the motion of a quantum particle to the properties of the potential is a fundamental problem of physics, which is far from being solved. Can a medium with a potential which is neither periodic nor quasi-periodic be a conductor? That question seems to have been never addressed, despite being both interesting and having practical importance. Here we propose a new approach to the spectral problem of the one-dimensional Schrödinger operator with a bounded potential. We construct a wide class of potentials having a spectrum consisting of the positive semiaxis and finitely many bands on the negative semiaxis. These potentials, which we call primitive, are reflectionless for positive energy and in general are neither periodic nor quasi-periodic. Moreover, they can be stochastic, and yet allow ballistic transport, and thus describe one-dimensional ideal conductors. Primitive potentials also generate a new class of solutions of the KdV hierarchy. Stochastic primitive potentials describe integrable turbulence, which is important for hydrodynamics and nonlinear optics. We construct the potentials by numerically solving a system of singular integral equations. We hypothesize that finite-gap potentials are a subclass of primitive potentials, and prove this in the case of one-gap potentials.

Time-Varying Periodicity in Intraday Volatility

DEFF Research Database (Denmark)

Andersen, Torben Gustav; Thyrsgaard, Martin; Todorov, Viktor

We develop a nonparametric test for deciding whether return volatility exhibits time-varying intraday periodicity using a long time-series of high-frequency data. Our null hypothesis, commonly adopted in work on volatility modeling, is that volatility follows a stationary process combined...... with a constant time-of-day periodic component. We first construct time-of-day volatility estimates and studentize the high-frequency returns with these periodic components. If the intraday volatility periodicity is invariant over time, then the distribution of the studentized returns should be identical across...... with estimating volatility moments through their sample counterparts. Critical values are computed via easy-to-implement simulation. In an empirical application to S&P 500 index returns, we find strong evidence for variation in the intraday volatility pattern driven in part by the current level of volatility...

Shorter Leukocyte Telomere Length in Relation to Presumed Nonalcoholic Fatty Liver Disease in Mexican-American Men in NHANES 1999–2002

Directory of Open Access Journals (Sweden)

Janet M. Wojcicki

2017-01-01

Full Text Available Leukocyte telomere length is shorter in response to chronic disease processes associated with inflammation such as diabetes mellitus and coronary artery disease. Data from the National Health and Nutrition Examination Survey (NHANES from 1999 to 2002 was used to explore the relationship between leukocyte telomere length and presumed NAFLD, as indicated by elevated serum alanine aminotransferase (ALT levels, obesity, or abdominal obesity. Logistic regression models were used to evaluate the relationship between telomere length and presumed markers of NAFLD adjusting for possible confounders. There was no relationship between elevated ALT levels, abdominal obesity, or obesity and telomere length in adjusted models in NHANES (OR 1.13, 95% CI 0.48–2.65; OR 1.17, 95% CI 0.52–2.62, resp.. Mexican-American men had shorter telomere length in relation to presumed NAFLD (OR 0.07, 95% CI 0.006–0.79 and using different indicators of NAFLD (OR 0.012, 95% CI 0.0006–0.24. Mexican origin with presumed NAFLD had shorter telomere length than men in other population groups. Longitudinal studies are necessary to evaluate the role of telomere length as a potential predictor to assess pathogenesis of NALFD in Mexicans.

Innovative quality management practices in the Dutch construction industry

NARCIS (Netherlands)

Bossink, B.A.G.

2002-01-01

Quality management practices do support the management of strategically important innoυation processes. This conclusion is based on empirical research in the Dutch construction industry. A large-scale innovative construction project is intensively studied during a three-year period. The quality

Construction of the advanced boiling water reactor in Japan

International Nuclear Information System (INIS)

Natsume, Nobuo; Noda, Hiroshi

1996-01-01

The Advanced Boiling Reactor (ABWR) has been developed with international cooperation between Japan and the US as the generation of plants for the 1990s and beyond. It incorporates the best BWR technologies from the world in challengeable pursuit of improved safety and reliability, reduced construction and operating cost, reduced radiation exposure and radioactive waste. Tokyo Electric Power Company (MPCO) decided to apply the first ABWRs to unit No. 6 and 7 of Kashiwazaki-Kariwa nuclear power station (K-6 and 7). These units are scheduled to commence commercial operation in December 1996 and July 1997 respectively. Particular attention is given in this discussion to the construction period from rock inspection for the reactor building to commercial operation, which is to be achieved in only 52 months through innovative and challenging construction methods. To date, construction work is advancing ahead of the original schedule. This paper describes not only how to shorten the construction period by adoption of a variety of new technologies, such as all-weather construction method and large block module construction method, but also how to check and test the state of the art technologies during manufacturing and installation of new equipment for K-6 and 7

Laser-induced atomic assembling of periodic layered nanostructures of silver nanoparticles in fluoro-polymer film matrix

International Nuclear Information System (INIS)

Bagratashvili, V N; Minaev, N V; Timashev, P S; Yusupov, V I; Rybaltovsky, A O; Firsov, V V

2010-01-01

Fluorinated acrylic polymer (FAP) films have been impregnated with silver precursor (Ag(hfac)COD) by supercritical fluid technique and next irradiated with laser (λ = 532 nm). Laser-chemically reduced Ag atoms have been assembled into massifs of Ag nanoparticles (3 – 8 nm) in FAP/Ag(hfac)COD films matrix in the form of periodic layered nanostructures (horizontal to film surface) with unexpectedly short period (90 – 180 nm). The wavelet analysis of TEM images reveals the existence of even shorter-period structures in such films. Photolysis with non-coherent light or pyrolysis of FAP/Ag(hfac)COD film results in formation of Ag nanoparticles massifs but free of any periodic nanoparticle assemblies. Our interpretation of the observed effect of laser formation of short-period nano-sized Ag nanoparticle assemblies is based on self-enhanced interference process in the course of modification of optical properties of film

Advanced construction methods in ACR

International Nuclear Information System (INIS)

Elgohary, M.; Choy, E.; Yu, S.K.W.

2002-01-01

The ACR - Advanced CANDU Reactor, developed by Atomic Energy of Canada Limited (AECL), is designed with constructability considerations as a major requirement during all project phases from the concept design stage to the detail design stage. This necessitated a much more comprehensive approach in including constructability considerations in the design to ensure that the construction duration is met. For the ACR-700, a project schedule of 48 months has been developed for the nth replicated unit with a 36 month construction period duration from First Concrete to Fuel Load. An overall construction strategy that builds on the success of the construction methods that are proven in the construction of the Qinshan CANDU 6 project has been developed for the ACR. The overall construction strategy comprises the 'Open Top' construction technique using a Very Heavy Lift crane, parallel construction activities, with extensive modularization and prefabrication. In addition, significant applications of up to date construction technology will be implemented, e.g. large volume concrete pours, prefabricated rebar, use of climbing forms, composite structures, prefabricated permanent formwork, automatic welding, and utilization of the latest electronic technology tools such as 3D CADDs modelling yields a very high quality, clash free product to allow construction to be completed 'right the first time' and eliminates rework. Integration of 3D CADDs models and scheduling tools such as Primavera has allowed development of actual construction sequences and an iterative approach to schedule verification and improvement. Modularization and prefabrication are major features of the ACR design in order to achieve the project schedule. For the reactor building approximately 80% of the volume will be installed as modules or prefabricated assembles. This ensures critical path activities are achieved. This paper examines the advanced construction methods implemented in the design in order to

Estimation of construction waste generation and management in Thailand.

Science.gov (United States)

Kofoworola, Oyeshola Femi; Gheewala, Shabbir H

2009-02-01

This study examines construction waste generation and management in Thailand. It is estimated that between 2002 and 2005, an average of 1.1 million tons of construction waste was generated per year in Thailand. This constitutes about 7.7% of the total amount of waste disposed in both landfills and open dumpsites annually during the same period. Although construction waste constitutes a major source of waste in terms of volume and weight, its management and recycling are yet to be effectively practiced in Thailand. Recently, the management of construction waste is being given attention due to its rapidly increasing unregulated dumping in undesignated areas, and recycling is being promoted as a method of managing this waste. If effectively implemented, its potential economic and social benefits are immense. It was estimated that between 70 and 4,000 jobs would have been created between 2002 and 2005, if all construction wastes in Thailand had been recycled. Additionally it would have contributed an average savings of about 3.0 x 10(5) GJ per year in the final energy consumed by the construction sector of the nation within the same period based on the recycling scenario analyzed. The current national integrated waste management plan could enhance the effective recycling of construction and demolition waste in Thailand when enforced. It is recommended that an inventory of all construction waste generated in the country be carried out in order to assess the feasibility of large scale recycling of construction and demolition waste.

Quasi-periodic Pulsations in the Most Powerful Solar Flare of Cycle 24

Science.gov (United States)

Kolotkov, Dmitrii Y.; Pugh, Chloe E.; Broomhall, Anne-Marie; Nakariakov, Valery M.

2018-05-01

Quasi-periodic pulsations (QPPs) are common in solar flares and are now regularly observed in stellar flares. We present the detection of two different types of QPP signals in the thermal emission light curves of the X9.3-class solar flare SOL2017-09-06T12:02, which is the most powerful flare of Cycle 24. The period of the shorter-period QPP drifts from about 12 to 25 s during the flare. The observed properties of this QPP are consistent with a sausage oscillation of a plasma loop in the flaring active region. The period of the longer-period QPP is about 4 to 5 minutes. Its properties are compatible with standing slow magnetoacoustic oscillations, which are often detected in coronal loops. For both QPP signals, other mechanisms such as repetitive reconnection cannot be ruled out, however. The studied solar flare has an energy in the realm of observed stellar flares, and the fact that there is evidence of a short-period QPP signal typical of solar flares along with a long-period QPP signal more typical of stellar flares suggests that the different ranges of QPP periods typically observed in solar and stellar flares is likely due to observational constraints, and that similar physical processes may be occurring in solar and stellar flares.

Periodic permanent magnet focusing system with high peak field

International Nuclear Information System (INIS)

Zhang Hong; Liu Weiwei; Bai Shuxin; Chen Ke

2008-01-01

In this study, hybrid periodic permanent magnet (PPM) system is studied, which has high axial magnetic field and low magnetic leakage. By simulation computation, some laws of magnetic field distribution vs. structure dimensions were obtained. A hybrid PPM is designed and constructed whose peak field reaches 0.6 T. The factors inducing discrepancies between computational results and practical measurements are analyzed. The magnetic field distribution is very sensitive to the variations of constructional parameters. Construction accuracy greatly influences the magnetic field distribution. Research results obtained here are potentially valuable for future work

Inflation from periodic extra dimensions

Energy Technology Data Exchange (ETDEWEB)

Higaki, Tetsutaro [Department of Physics, Keio University, Kanagawa 223-8522 (Japan); Tatsuta, Yoshiyuki, E-mail: thigaki@rk.phys.keio.ac.jp, E-mail: y_tatsuta@akane.waseda.jp [Department of Physics, Waseda University, Tokyo 169-8555 (Japan)

2017-07-01

We discuss a realization of a small field inflation based on string inspired supergravities. In theories accompanying extra dimensions, compactification of them with small radii is required for realistic situations. Since the extra dimension can have a periodicity, there will appear (quasi-)periodic functions under transformations of moduli of the extra dimensions in low energy scales. Such a periodic property can lead to a UV completion of so-called multi-natural inflation model where inflaton potential consists of a sum of multiple sinusoidal functions with a decay constant smaller than the Planck scale. As an illustration, we construct a SUSY breaking model, and then show that such an inflaton potential can be generated by a sum of world sheet instantons in intersecting brane models on extra dimensions containing orbifold. We show also predictions of cosmic observables by numerical analyzes.

Detection of solar radio brightness oscillations with 160.01-min period from direct measurements

International Nuclear Information System (INIS)

Efanov, V.A.; Moiseev, I.G.; Nesterov, N.S.

1983-01-01

It is shown that direct measurements of the quiet Sun brightness at 8.2 and 13.5 mm wavelengths corrected for extinction in the Earth atmosphere by means of the Bouguer law reveal the 160.01-min periodic component. The relative amplitudes of variations are of approximately 6x10 -4 at the shorter wavelength and of 10 -3 at the longer one. The brightness maximum coincides with the phase of the maximal radius of the photosphere as derived from the optical data

Method of constructing reactor buildings

International Nuclear Information System (INIS)

Hyuga, Takenori; Nagai, Fumio; Akutsu, Masayoshi.

1985-01-01

Purpose: To shorten the construction period for LMFBR type reactors, as well as smoothly introduce high pressure steams generated in concretes upon loss of coolant accidents to the outside of the system. Method: After disposing a liner plate as a chamber lining of reactor buildings, heat insulation materials having steam discharge channels at the outer surface are attached to the outside of the liner plate and, further, an organic films are disposed to the outside of the heat insulation materials. Then, concretes are spiked to the outside of the organic films using the liner plate and the heat insulation material as the mold for concretes. In this way, the construction period can be shortened by utilizing the liner plate and the heat insulation materials as the mold for concretes, as well as steams at high temperature resulted in the concretes upon loss of coolant accidents can smoothly be discharged to the outside of the system. (Moriyama, K.)

Periodic oscillation and exponential stability of delayed CNNs

Science.gov (United States)

Cao, Jinde

2000-05-01

Both the global exponential stability and the periodic oscillation of a class of delayed cellular neural networks (DCNNs) is further studied in this Letter. By applying some new analysis techniques and constructing suitable Lyapunov functionals, some simple and new sufficient conditions are given ensuring global exponential stability and the existence of periodic oscillatory solution of DCNNs. These conditions can be applied to design globally exponentially stable DCNNs and periodic oscillatory DCNNs and easily checked in practice by simple algebraic methods. These play an important role in the design and applications of DCNNs.

Positive experience in the construction and project management of Kashiwazaki-Kariwa no. 6 and no. 7

International Nuclear Information System (INIS)

Minematsu, A.

1999-01-01

Kashiwazaki-Kariwa No.6 and No.7 (K-6/7), the world first Advanced Boiling Water Reactor (ABWR) units, started commercial operations on November 7, 1996 and July 2, 1997 respectively. ABWR has been developed as a standard design of the next generation BWR to meet common goals set by the Japanese electric utilities and BWR manufacturers (GE, Hitachi and Toshiba) based on our design, construction, operation and maintenance experience of nuclear power plants. The construction of K-6/7 and confirmatory tests for the verification of the first-of-a-kind (FOAK) design features of ABWR were conducted smoothly without any delay. The duration of the construction was 51.5 months. It was shorter than conventional BWRs in Japan by nearly one year. This was realized by design features of ABWR for better constructability, a principle of 'test before use' applied to the FOAKs, advanced construction technology, detailed engineering at very early stages of the project, and good construction management. The positive experience in the K-6/7 project is now being reviewed and standardized for next ABWR projects. The data and knowledge accumulated through the K-6/7 project will be utilized effectively with the aide of the latest information technology. (author)

Upper Limit of the Periodic Table and Synthesis of Superheavy Elements

Directory of Open Access Journals (Sweden)

Khazan A.

2007-04-01

Full Text Available For the first time, using the heaviest possible element, the diagram for known nuclides and stable isotopes is constructed. The direction of search of superheavy elements is indicated. The Periodic Table with an eighth period is tabulated.

Information systems for material flow management in construction processes

Science.gov (United States)

Mesároš, P.; Mandičák, T.

2015-01-01

The article describes the options for the management of material flows in the construction process. Management and resource planning is one of the key factors influencing the effectiveness of construction project. It is very difficult to set these flows correctly. The current period offers several options and tools to do this. Information systems and their modules can be used just for the management of materials in the construction process.

Tropical temperature altitude amplification in the hiatus period (1998-2012

Directory of Open Access Journals (Sweden)

Ducić Vladan D.

2015-01-01

Full Text Available In the period 1998-2012 there was a stagnation in temperature rise, despite the GHGs radiation forcing is increased (hiatus period. According to Global Circulation Models simulations, expected response on the rise of GHGs forcing is tropical temperature altitude amplification - temperature increases faster in higher troposphere than in lower troposphere. In this paper, two satellite data sets, UAH MSU and RSS, were used to test altitude temperature amplification in tropic (20°N-20°S in the hiatus period. We compared data from satellite data sets from lower troposphere (TLT and middle troposphere (TMT in general and particularly for land and ocean (for UAH MSU. The results from both satellite measurements showed the presence of hiatus, i.e. slowdown of the temperature rise in the period 1998-2012 compared to period 1979-2012 (UAH MSU and temperature fall for RSS data. Smaller increase, i.e. temperature fall over ocean showed that hiatus is an ocean phenomenon above all. Data for UAH MSU showed that temperature altitude amplification in tropic was not present either for period 1979-2012, or 1998-2012. RSS data set also do not show temperature altitude amplification either for longer (1979-2012, or for shorter period (1998-2012. RSS data for successive 15-year periods from 1979-1993 till 1998-2012 does not show tropical temperature altitude amplification and in one case negative trend is registered in TLT and in two cases in TMT. In general, our results do not show presence of temperature altitude amplification in tropic in the hiatus period. [Projekat Ministarstva nauke Republike Srbije, br. III47007

Cost-effectiveness of longer-term versus shorter-term provision of antibiotics in patients with persistent symptoms attributed to Lyme disease

NARCIS (Netherlands)

Berende, A.; Nieuwenhuis, L.; Hofstede, H.J.M. ter; Vos, F.J.; Vogelaar, M.L.; Tromp, M.A.; Middendorp, H. van; Donders, A.R.T.; Evers, A.W.M.; Kullberg, B.J.; Adang, E.M.M.

2018-01-01

BACKGROUND: The treatment of persistent symptoms attributed to Lyme disease remains controversial. Recently, the PLEASE study did not demonstrate any additional clinical benefit of longer-term versus shorter-term antibiotic treatment. However, the economic impact of the antibiotic strategies has not

Construction cost impacts related to manpower, material, and equipment factors in contractor firms perspective

Science.gov (United States)

Husin, Saiful; Abdullah, Riza, Medyan; Afifuddin, Mochammad

2017-11-01

Risk can be defined as consequences which possible happened inscrutably. Although an activity has planned as good as possible, but it keep contains uncertainty. Implementation of construction project was encountering various risk impacts from a number of risk factors. This study was intended to analyze the impacts of construction cost to for contractor firms as construction project executor related to the factors of manpower, material and equipment. The study was using data obtained from questionnaires distributed to 15 large qualification contractor firms. The period of study classified into conflict period (2000-2004), post tsunami disaster rehabilitation and reconstruction period (2005-2009), and post rehabilitation and reconstruction period (2010-present). The statistical analysis of severity index and variance used to analyze the data. The three risk factors reviewed generally affected the cost in a medium impact. The high impact occurred in minor variables, which are `increase in material prices', `theft of materials', and `the fuel scarcity'. In overall, the three risk factors and the observed period contributed significant impact on construction costs.

Homework schedule: an important factor associated with shorter sleep duration among Chinese school-aged children.

Science.gov (United States)

Li, Shenghui; Yang, Qian; Chen, Zhe; Jin, Xingming; Jiang, Fan; Shen, Xiaoming

2014-09-03

This study was designed to examine the hypothesis that homework schedule has adverse impacts on Chinese children's sleep-wake habits and sleep duration. A random sample of 19,299 children aged 5.08 to 11.99 years old participated in a large, cross-sectional survey. A parent-administered questionnaire was completed to quantify children's homework schedule and sleep behaviors. Generally, it was demonstrated that more homework schedule was significantly associated with later bedtime, later wake time, and shorter sleep duration. Among all sleep variables, bedtime and sleep duration during weekdays appeared to be most affected by homework schedule, especially homework schedule during weekdays.

INDOT Construction Inspection Priorities : Technical Summary

Science.gov (United States)

2012-05-01

In the last decade, the Indiana Department of Transportation (INDOT) increased the number of construction projects funded by capital made available through the leasing of the Indiana Toll Road. However, during the same time period, the level of perso...

Interstitial lung abnormalities in treatment-naïve advanced non-small-cell lung cancer patients are associated with shorter survival

Energy Technology Data Exchange (ETDEWEB)

Nishino, Mizuki, E-mail: Mizuki_Nishino@DFCI.HARVARD.EDU [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Department of Imaging, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215 (United States); Cardarella, Stephanie [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States); Dahlberg, Suzanne E. [Department of Biostatistics and Computational Biology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215 (United States); Araki, Tetsuro [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Lydon, Christine; Jackman, David M.; Rabin, Michael S. [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States); Hatabu, Hiroto [Department of Radiology, Brigham and Women' s Hospital, 75 Francis St., Boston, MA 02115 (United States); Johnson, Bruce E. [Department of Medical Oncology, Dana-Farber Cancer Institute, 450 Brookline Ave., Boston, MA 02215, (United States)

2015-05-15

Highlights: • Interstitial lung abnormalities were present in 14% of stage IV NSCLC patients. • ILA was more common in older patients with heavier smoking history. • ILA was associated with shorter survival after adjusting for smoking and therapy. • ILA could be an additional independent marker for survival in advanced NSCLC. - Abstract: Objective: Interstitial lung diseases are associated with increased risk of lung cancer. The prevalence of ILA at diagnosis of advanced non-small-cell lung cancer (NSCLC) and its impact on overall survival (OS) remain to be investigated. Materials and method: The study included 120 treatment-naïve stage IV NSCLC patients (53 males, 67 females). ILA was scored on CT prior to any systemic therapy using a 4-point scale [0 = no evidence of ILA, 1 = equivocal for ILA, 2 = suspicious for ILA, 3 = ILA] by a sequential reading method previously reported. ILA scores of 2 or 3 indicated the presence of ILA. Results: ILA was present in 17 patients (14%) with advanced NSCLC prior to any treatment (score3: n = 2, score2: n = 15). These 17 patients were significantly older (median age: 69 vs. 63, p = 0.04) and had a heavier smoking history (median: 40 vs. 15.5 pack-year, p = 0.003) than those with ILA score 0 or 1. Higher ILA scores were associated with shorter OS (p = 0.001). Median OS of the 17 patients with ILA was 7.2 months [95%CI: 2.9–9.4] compared to 14.8 months [95%CI: 11.1–18.4] in patients with ILA score 0 or 1 (p = 0.002). In a multivariate model, the presence of ILA remained significant for increased risk for death (HR = 2.09, p = 0.028) after adjusting for first-line systemic therapy (chemotherapy, p < 0.001; TKI, p < 0.001; each compared to no therapy) and pack years of smoking (p = 0.40). Conclusion: Radiographic ILA was present in 14% of treatment-naïve advanced NSCLC patients. Higher ILA scores were associated with shorter OS, indicating that ILA could be a marker of shorter survival in advanced NSCLC.

Using the Lens of “Social Construction of Technology” to Understand the Design and Implementation of Aadhaar (UID) Project

OpenAIRE

Sivamalai, Lewin

2013-01-01

Part 7: Shorter Papers; International audience; Extant Research on e-government projects has shown that multiple stakeholders are at play always, each with their own divergent interests. And many a time, differences in stakeholder expectations from a project has resulted in projects failing or being abandoned after initial usage. Social Construction of Technology (SCOT) studies look at the development history of a technology in order to understand how that particular technology has evolved, b...

Constructibility assessment of APR1400

International Nuclear Information System (INIS)

Cho, Sung Jae; Kang, Yong Chul; Lee, Jae Gon; Lim, Woo Sang

2003-01-01

APR1400 (formerly KNGR) development is one of national G-7 projects sponsored by government and KHNP (Korea Hydro and Nuclear Power Co., LTD). It is an evolutionary standard reactor with the thermal output of 4000MWt and has been adopted for Shin-Kori Unit 3 and 4. The government organizations, research institutes, universities and industries have participated in the project since 1992 along with KHNP, and the standard design certification program was issued in May 2002. The project set up the top-tier requirements about the safety, economy, operability and maintainability, and constructibility in the early design stage. The requirements have been evaluated periodically during the design process, and the results were reflected to the design. This paper describes the methods for constructibility enhancement and the results of schedule analysis to assure meeting construction duration target, which is set to 48 months from the first concrete pouring to the commercial operation on the condition that learning effects are maximized at Nth plant. To meet the target schedule, the design characteristics and constructibility studies such as new construction methods and construction schedule analysis were performed. The new construction methods presented here are over the top method for NSSS components, deck plate and steel from for concrete wall and slab, automatic welding for large bore piping, and modularization of components and structure, etc. (author)

Collapse simulation of building constructions

Directory of Open Access Journals (Sweden)

Nekrest'yanov Viktor Nikolaevich

Full Text Available The physical reasons for building structures destruction are both the forces arising at stress-strain state of construction elements and external influences arising at emergency situations, as well as their moments, impulses and periodic impulses with the frequencies close to of fluctuations frequencies of construction elements. We shall call the mathematical calculation models for the parameters-reasons of destructions the basic models. The basic models of destruction of building structures elements allow not only providing necessary level of reliability and survivability of the elements and the construction as a whole already at the stage of their design, but also giving the chance, at their corresponding completion, to provide rational decisions on the general need of recovery works and their volume depending on destruction level. Especially important for rational design decisions development, which ensure the demanded constructional safety of building structures, is library creation of the basic mathematical models of standard processes of bearing elements destructions for standard construction designs for the purpose of the further forecast (assessment of the level and probabilities of standard destructions. Some basic mathematical models of destructions processes of the standard elements of building structures are presented in the present article. A model of accounting for construction defects and a model of obtaining requirements to probabilities of partial destructions of a construction are given. Both of these models are probabilistic.

Periodicity, the Canon and Sport

Directory of Open Access Journals (Sweden)

Thomas F. Scanlon

2015-10-01

Full Text Available The topic according to this title is admittedly a broad one, embracing two very general concepts of time and of the cultural valuation of artistic products. Both phenomena are, in the present view, largely constructed by their contemporary cultures, and given authority to a great extent from the prestige of the past. The antiquity of tradition brings with it a certain cachet. Even though there may be peripheral debates in any given society which question the specifics of periodization or canonicity, individuals generally accept the consensus designation of a sequence of historical periods and they accept a list of highly valued artistic works as canonical or authoritative. We will first examine some of the processes of periodization and of canon-formation, after which we will discuss some specific examples of how these processes have worked in the sport of two ancient cultures, namely Greece and Mesoamerica.

APPLIED ORGANIZATION OF CONSTRUCTION

Directory of Open Access Journals (Sweden)

Kievskiy Leonid Vladimirovich

2017-03-01

Full Text Available Applied disciplines in the sphere of construction which are engaged in the solution of vital macroeconomical problems (the general trend of development of these disciplines is the expansion of problematics and mutual integration are considered. Construction organization characteristic at the present stage as a systems engineering discipline covering the investment process of creation of real estate items, is given. The main source of current research trends for applied sciences (socio-economic development forecasts, regional and local programs is determined. Interpenetration and integration of various fields of knowledge exemplified by the current interindustry problem of blocks renovation organization of existing development, is demonstrated. Mathematical model of wave construction (for the period of deployment is proposed. Nature of dependence of the total duration of renovation on the limit of annual input and coefficient of renovation, is established. Overall structure of the Moscow region housing market is presented, and approaches to definition of effective demand are proposed.

[Impact of maternal HIV status on family constructions and the infant's relational environment during the perinatal period].

Science.gov (United States)

Trocmé, N; Courcoux, M-F; Tabone, M-D; Leverger, G; Dollfus, C

2013-01-01

To assess whether maternal HIV-positive status negatively affects family construction and the child's psychological environment. Could this be responsible for behavioral problems observed in children infected with or affected by HIV? Interviews were conducted with 60 HIV+ mothers and their infants during the perinatal period, within 3 months of delivery, collected at the time of a pediatric outpatient visit within a PMTCT program. Half of the 60 mothers did not live with the infant's father, 56% of multiparous mothers were separated from their previous children. Sixty-five percent of the fathers were informed of the mother's HIV-positive status, although 90% of fathers who lived with the mothers were informed. During pregnancy, 80% of mothers reported psychological stress; after delivery, 72% of mothers suffered from not being allowed to breastfeed their infants, 43.5% expressed a fear of transmitting the infection to the child, and 40% avoided contacts with the infant. The impact of the mother's psychological stress and anxiety related to the risk of HIV transmission through breastfeeding and casual contacts were already noticeable in the first mother-child interrelations. Although the risk of MTC transmission in now very small, psychological troubles related to maternal HIV status may negatively affect the children's well-being and behavior, psychological support should be provided for mothers and children as part of comprehensive services. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Systemic lupus erythematosus and vitamin D deficiency are associated with shorter telomere length among African Americans: a case-control study.

Directory of Open Access Journals (Sweden)

Brett M Hoffecker

Full Text Available Systemic lupus erythematosus (SLE is a chronic systemic autoimmune disease that disproportionately affects African American females. The causes of SLE are unknown but postulated to be a combination of genetic predisposition and environmental triggers. Vitamin D deficiency is one of the possible environmental triggers. In this study we evaluated relationships between vitamin D status, cellular aging (telomere length and anti-telomere antibodies among African American Gullah women with SLE. The study population included African American female SLE patients and unaffected controls from the Sea Island region of South Carolina. Serum 25-hydroxyvitamin D levels were measured using a nonchromatographic radioimmunoassay. Telomere length was measured in genomic DNA of peripheral blood mononuclear cells (PBMCs by monochrome multiplex quantitative PCR. Anti-telomere antibody levels were measured by enzyme-linked immunosorbent assay (ELISA. Patients with SLE had significantly shorter telomeres and higher anti-telomere antibody titers compared to age- and gender-matched unaffected controls. There was a positive correlation between anti-telomere antibody levels and disease activity among patients and a significant correlation of shorter telomeres with lower 25-hydroxyvitamin D levels in both patients and controls. In follow-up examination of a subset of the patients, the patients who remained vitamin D deficient tended to have shorter telomeres than those patients whose 25-hydroxyvitamin D levels were repleted. Increasing 25-hydroxyvitamin D levels in African American patients with SLE may be beneficial in maintaining telomere length and preventing cellular aging. Moreover, anti-telomere antibody levels may be a promising biomarker of SLE status and disease activity.

Computer integrated construction at AB building in reprocessing plant

International Nuclear Information System (INIS)

Takami, Masahiro; Azuchi, Takehiro; Sekiguchi, Kenji

1999-01-01

JNFL (Japan Nuclear Fuel Limited) is now processing with construction of the spent nuclear fuel reprocessing plant at Rokkasho Village in Aomori Prefecture, which is coming near to the busiest period of construction. Now we are trying to complete the civil work of AB Building and KA Building in a very short construction term by applying CIC (Computer Integrated Construction) concept, in spite of its hard construction conditions, such as the massive and complicated building structure, interferences with M and E (Mechanical and Electrical) work, severe winter weather, remote site location, etc. The key technologies of CIC are three-dimensional CAD, information network, and prefabrication and mechanization of site work. (author)

Influence of Formal Education on Cognitive Reserve in Patients with Multiple Sclerosis.

Science.gov (United States)

Luerding, Ralf; Gebel, Sophie; Gebel, Eva-Maria; Schwab-Malek, Susanne; Weissert, Robert

2016-01-01

The concept of cognitive reserve (CR) and its influence on cognitive impairment has attracted increasing interest. One hundred twenty-eight patients with multiple sclerosis (MS) from Southern Germany were evaluated during the years 2000 to 2012. Twenty-seven neuropsychological (NP) tests were applied regarding basic cognitive functions, attention, executive functions, visual perception and construction, memory and learning, problem solving, and language. By this retrospective approach, a comprehensive NP profile of the investigated individuals was established. An effect of timespan of formal education on CR was observed. Enrichment by reading, physical activities, and challenging vocational practices had more profound effects in patients who had undergone a shorter educational period compared to a longer educational period. In summary, our study demonstrates that the advantage of longer formal education periods, compared to shorter formal education periods, can be counterbalanced by high frequencies of reading, physical activities, and challenging vocational practices in patients with MS.

Influence of formal education on cognitive reserve in patients with multiple sclerosis

Directory of Open Access Journals (Sweden)

Ralf eLürding

2016-03-01

Full Text Available The concept of cognitive reserve (CR and its influence on cognitive impairment (CI has attracted increasing interest. 128 patients with multiple sclerosis (MS from Southern Germany were evaluated during the years 2000 to 2012. 27 neuropsychological (NP tests were applied regarding Basic Cognitive Functions, Attention, Executive Functions, Visual Perception and Construction, Memory and Learning, Problem Solving, and Language. By this retrospective approach, a comprehensive neuropsychological profile of the investigated individuals was established. An effect of timespan of formal education on CR was observed. Enrichment by reading, physical activities, and challenging vocational practices had more profound effects in patients who had undergone a shorter educational period compared to a longer educational period. In summary, our study demonstrates that the advantage of longer formal education periods, compared to shorter formal education periods, can be counterbalanced by high frequencies of reading, physical activities, and challenging vocational practices in patients with MS.

The “green wave” mode production on the two-lane highways during the construction works time period

Directory of Open Access Journals (Sweden)

А. Berezhnoy

2007-12-01

Full Text Available In the paper, the problem of a bi-directional “green wave” mode production is considered for the vehicle flows motion on two-lane highways during the conducting of construction works. The solution of the given task allows to develop practical recommendations for the sphere of the construction works management on two-lane roads and country highways, and also to raise traffic control efficiency in the pointed conditions. The comparative analysis of possible traffic regulation modes for the set scheme of road construction works sites and the estimation of their effi ciency is performed, the test of a hypothesis regarding the possibility of a bi-directional “green wave” mode realization is carried out, and calculation of traffic lights signal control phases time is performed.

Integrated construction management technology for power plants

International Nuclear Information System (INIS)

Okada, Hisako; Miura, Jun; Nishitani, Yasuhiko

2003-01-01

The improvement and rationalization of the plant construction technology has been promoted in order to shorten the construction period, to improve the quality and reliability, and especially to reduce construction costs. With the recent remarkable advances of computer technology, it is necessary to introduce an electronic information technology (IT) into the construction field, and to develop a business process. In such a situation, Hitachi has developed and applied integrated construction support system, which is consistent among design, production and construction. This system has design information and schedule information made electronically as a basic database, and characterizes with project management function based on that information. By introduction of this system, electronic processing of information and reduction of paperwork has enabled high efficiency and standardization of on-site indirect work. Furthermore, by collaboration with the civil company, electrical data exchange has been carried out and developed techniques to improve the interface between mechanical and civil work. High accuracy of construction planning and unification of schedule data have been achieved, and consequently, rework and adjustment at the job site have been greatly reduced. (author)

At least 10% shorter C–H bonds in cryogenic protein crystal structures than in current AMBER forcefields

Energy Technology Data Exchange (ETDEWEB)

Pang, Yuan-Ping, E-mail: pang@mayo.edu

2015-03-06

High resolution protein crystal structures resolved with X-ray diffraction data at cryogenic temperature are commonly used as experimental data to refine forcefields and evaluate protein folding simulations. However, it has been unclear hitherto whether the C–H bond lengths in cryogenic protein structures are significantly different from those defined in forcefields to affect protein folding simulations. This article reports the finding that the C–H bonds in high resolution cryogenic protein structures are 10–14% shorter than those defined in current AMBER forcefields, according to 3709 C–H bonds in the cryogenic protein structures with resolutions of 0.62–0.79 Å. Also, 20 all-atom, isothermal–isobaric, 0.5-μs molecular dynamics simulations showed that chignolin folded from a fully-extended backbone formation to the native β-hairpin conformation in the simulations using AMBER forcefield FF12SB at 300 K with an aggregated native state population including standard error of 10 ± 4%. However, the aggregated native state population with standard error reduced to 3 ± 2% in the same simulations except that C–H bonds were shortened by 10–14%. Furthermore, the aggregated native state populations with standard errors increased to 35 ± 3% and 26 ± 3% when using FF12MC, which is based on AMBER forcefield FF99, with and without the shortened C–H bonds, respectively. These results show that the 10–14% bond length differences can significantly affect protein folding simulations and suggest that re-parameterization of C–H bonds according to the cryogenic structures could improve the ability of a forcefield to fold proteins in molecular dynamics simulations. - Highlights: • Cryogenic crystal structures are commonly used in computational studies of proteins. • C–H bonds in the cryogenic structures are shorter than those defined in forcefields. • A survey of 3709 C–H bonds shows that the cryogenic bonds are 10–14% shorter. • The

Reemission spectra and inelastic processes at interaction of attosecond and shorter duration electromagnetic pulses with atoms

International Nuclear Information System (INIS)

Makarov, D.N.; Matveev, V.I.

2017-01-01

Inelastic processes and the reemission of attosecond and shorter electromagnetic pulses by atoms have been considered within the analytical solution of the Schrödinger equation in the sudden perturbation approximation. A method of calculations with the exact inclusion of spatial inhomogeneity of the field of an ultrashort pulse and the momenta of photons in the reemission processes has been developed. The probabilities of inelastic processes and spectra of reemission of ultrashort electromagnetic pulses by one- and many-electron atoms have been calculated. The results have been presented in the form of analytical formulas.

Ecological monitoring of the construction phase of the Cold Northcott wind farm

International Nuclear Information System (INIS)

Hocking, S.

1994-01-01

This report outlines the advice provided during the pre-construction and construction periods and presents the results of the monitoring carried out over the whole construction period. The advice given aimed to ensure that the ecologically important areas, previously identified, were unaffected by the development. Where effects were unavoidable, the advice aimed to ensure that these were minimised and the monitoring undertaken quantified any damage that occurred. Monitoring of the recovery of affected areas also formed an important part of this study and provides valuable information for minimising the effects of similar developments in the future. (author)

Rationalizing of construction engineering of nuclear power plants with pressurized water reactors

International Nuclear Information System (INIS)

Schmidt, S.

1977-01-01

Construction of large power plants requires further reduction of construction efforts and the construction period. A new constructional and technological solution has been developed with the steel-cell composite structure applied in the Greifswald nuclear power plant 'Bruno Leuschner' for the first time. Principles of design, fabrication, transport, and mounting are described. The benefits of the method are indicated. (author)

Use of a novel shorter minimum caliber needle for creating endoscopic tattoos for preoperative localization: a comparative ex vivo study.

Science.gov (United States)

Imai, Kenichiro; Hotta, Kinichi; Ito, Sayo; Yamaguchi, Yuichiro; Kawakami, Takeshi; Wada, Takuya; Igarashi, Kimihiro; Kishida, Yoshihiro; Kinugasa, Yusuke; Kawata, Noboru; Tanaka, Masaki; Kakushima, Naomi; Takizawa, Kohei; Ishiwatari, Hirotoshi; Matsubayashi, Hiroyuki; Ono, Hiroyuki

2017-06-01

In colorectal cancer surgery, inadvertent deep injections during endoscopic tattooing can cause India ink leakage into the peritoneum, leading to complications or to poor visualization of the surgical plane. This ex vivo animal study compared the use of novel shorter, minimum caliber needles versus conventional injection needles for endoscopic tattooing. Four endoscopists used the novel needles and conventional needles to make ten endoscopic tattoos (five tattoos/needle type/endoscopist) in harvested porcine rectum using a saline test-injection method. India ink leakage and the success of the tattoo (i. e. visible, tattoos but for none of the novel needle tattoos ( P  = 0.02). Tattoos created using the novel needles were more successful than those made with the conventional needles: 18/20 (90 %) vs. 11/20 (55 %); P  = 0.01. The use of novel shorter minimum caliber needles may be safe and effective for endoscopic tattooing for preoperative localization prior to colorectal cancer surgery.

Construction contract risk and reasonable evasions

International Nuclear Information System (INIS)

Wu Yunpeng

2012-01-01

Construction project has the characteristics such as large-scale investment, long-period implementation, excessive uncertainties,a single piece of production, etc. These characteristics determine the complexity of a construction project contract. To guarantee the time limit and quality of a project, finding ways to reduce and evade the contract risks as well as avoid unnecessary disputes are urgent requirements for each project manager. According to the practical situation, project contract risks are analyzed and illustrated in detail, and the concrete solutions for evading those risks are put forward. (authors)

APPLE-II type quasi-periodic variably polarizing undulator at HiSOR

International Nuclear Information System (INIS)

Sasaki, Shigemi; Miyamoto, Atsushi; Goto, Kiminori

2012-01-01

A newly constructed quasi-periodic APPLE-II undulator was installed in the HiSOR ring at Hiroshima Synchrotron Radiation Center, Hiroshima University during the summer shutdown period in 2011. This 1.8 m-long undulator has a period length of 78 mm. In this article, the mechanism of magnetic field generation for various polarization modes of APPLE undulator, the principle of quasi-periodic undulator and the performance of HiSOR QP-APPLE-II undulator are described. (author)

[Influence of traffic restriction on road and construction fugitive dust].

Science.gov (United States)

Tian, Gang; Li, Gang; Qin, Jian-Ping; Fan, Shou-Bin; Huang, Yu-Hu; Nie, Lei

2009-05-15

By monitoring the road and construction dust fall continuously during the "Good Luck Beijing" sport events, the reduction of road and construction dust fall caused by traffic restriction was studied. The contribution rate of road and construction dust to particulate matter of Beijing atmosphere environment, and the emission ratio of it to total local PM10 emission were analyzed. The results show that the traffic restriction reduces road and construction dust fall significantly. The dust fall average value of ring roads was 0.27 g x (m2 x d)(-1) in the "traffic restriction" period, and the values were 0.81 and 0.59 g x (m2 x d)(-1) 1 month and 7 days before. The dust fall average value of major arterial and minor arterial was 0.21 g x (m2 x d)(-1) in the "traffic restriction" period, and the values were 0.54 and 0.58 g x (m2 x d)(-1) 1 month and 7 days before. The roads emission reduced 60%-70% compared with before traffic restriction. The dust fall average values of civil architecture and utility architecture were 0.61 and 1.06 g x (m2 x d)(-1) in the "traffic restriction" period, and the values were 1.15 and 1.55 g x (m2 x d)(-1) 20 days before. The construction dust reduced 30%-47% compared with 20 days before traffic restriction. Road and construction dust emission are the main source of atmosphere particulate matter in Beijing, and its contribution to ambient PM10 concentration is 21%-36%. PM10 emitted from roads and constructions account for 42%-72% and 30%-51% of local emission while the local PM10 account for 50% and 70% of the total emission.

Construction industry accidents in Spain.

Science.gov (United States)

Camino López, Miguel A; Ritzel, Dale O; Fontaneda, Ignacio; González Alcantara, Oscar J

2008-01-01

This paper analyzed industrial accidents that take place on construction sites and their severity. Eighteen variables were studied. We analyzed the influence of each of these with respect to the severity and fatality of the accident. This descriptive analysis was grounded in 1,630,452 accidents, representing the total number of accidents suffered by workers in the construction sector in Spain over the period 1990-2000. It was shown that age, type of contract, time of accident, length of service in the company, company size, day of the week, and the remainder of the variables under analysis influenced the seriousness of the accident. IMPACT ON INJURY PREVENTION: The results obtained show that different training was needed, depending on the severity of accidents, for different age, length of service in the company, organization of work, and time when workers work. The research provides an insight to the likely causes of construction injuries in Spain. As a result of the analysis, industries and governmental agencies in Spain can start to provide appropriate strategies and training to the construction workers.

A novel small-period wiggler for free-electron lasers

International Nuclear Information System (INIS)

Feng Bibo; Wang Mingchang; Wang Zhijiang

1992-01-01

A novel small-period wiggler configuration constructed by sheet of bifilar-helix with ferro-core for free-electron lasers is proposed. The performance characteristics of the wiggler prototype with 10 mm period are measured. The field as high as 500 G to 1 kG have been obtained. The amplifier designs for operation at 190 GHz using modest electron beam energies in the range of 400-500 keV are presented

Minimization of Dead-Periods in MRI Pulse Sequences for Imaging Oblique Planes

Science.gov (United States)

Atalar, Ergin; McVeigh, Elliot R.

2007-01-01

With the advent of breath-hold MR cardiac imaging techniques, the minimization of TR and TE for oblique planes has become a critical issue. The slew rates and maximum currents of gradient amplifiers limit the minimum possible TR and TE by adding dead-periods to the pulse sequences. We propose a method of designing gradient waveforms that will be applied to the amplifiers instead of the slice, readout, and phase encoding waveforms. Because this method ensures that the gradient amplifiers will always switch at their maximum slew rate, it results in the minimum possible dead-period for given imaging parameters and scan plane position. A GRASS pulse sequence has been designed and ultra-short TR and TE values have been obtained with standard gradient amplifiers and coils. For some oblique slices, we have achieved shorter TR and TE values than those for nonoblique slices. PMID:7869900

Doubly periodic solutions of the modified Kawahara equation

International Nuclear Information System (INIS)

Zhang Dan

2005-01-01

Some doubly periodic (Jacobi elliptic function) solutions of the modified Kawahara equation are presented in closed form. Our approach is to introduce a new auxiliary ordinary differential equation and use its Jacobi elliptic function solutions to construct doubly periodic solutions of the modified Kawahara equation. When the module m → 1, these solutions degenerate to the exact solitary wave solutions of the equation. Then we reveal the relation of some exact solutions for the modified Kawahara equation obtained by other authors

Streamlined project closeout for construction at KYTC.

Science.gov (United States)

2017-09-01

Project closeout is the period between the end of construction and when a contract is finalized. During closeout, resources are held in encumbered funds intended for the project and in the contractors bonding capacity. Although the Kentucky Transp...

The periodic system of chemical elements: old and new developments

International Nuclear Information System (INIS)

Kibler, M.

1987-09-01

Some historical facts about the construction of a periodic system of chemical elements are reviewed. The Madelung rule is used to generate an unusual format for the periodic table. Following the work of Byakov, Kulakov, Rumer and Fet, such a format is further refined on the basis of a chain of groups starting with SU(2)xS0(4.2)

Long-Term Costs and Health Consequences of Issuing Shorter Duration Prescriptions for Patients with Chronic Health Conditions in the English NHS.

Science.gov (United States)

Martin, Adam; Payne, Rupert; Wilson, Edward Cf

2018-06-01

The National Health Service (NHS) in England spends over £9 billion on prescription medicines dispensed in primary care, of which over two-thirds is accounted for by repeat prescriptions. Recently, GPs in England have been urged to limit the duration of repeat prescriptions, where clinically appropriate, to 28 days to reduce wastage and hence contain costs. However, shorter prescriptions will increase transaction costs and thus may not be cost saving. Furthermore, there is evidence to suggest that shorter prescriptions are associated with lower adherence, which would be expected to lead to lower clinical benefit. The objective of this study is to estimate the cost-effectiveness of 3-month versus 28-day repeat prescriptions from the perspective of the NHS. We adapted three previously developed UK policy-relevant models, incorporating transaction (dispensing fees, prescriber time) and drug wastage costs associated with 3-month and 28-day prescriptions in three case studies: antihypertensive medications for prevention of cardiovascular events; drugs to improve glycaemic control in patients with type 2 diabetes; and treatments for depression. In all cases, 3-month prescriptions were associated with lower costs and higher QALYs than 28-day prescriptions. This is driven by assumptions that higher adherence leads to improved disease control, lower costs and improved QALYs. Longer repeat prescriptions may be cost-effective compared with shorter ones. However, the quality of the evidence base on which this modelling is based is poor. Any policy rollout should be within the context of a trial such as a stepped-wedge cluster design.

Examining the construct validity of the Basic Traits Inventory and the Ten-Item Personality Inventory in the South African context

Directory of Open Access Journals (Sweden)

Samantha A. Metzer

2014-08-01

Research purpose: The main purpose of this study was to examine the discriminant and convergent validity of two personality measures that measure the big five personality factors: the longer Basic Traits Inventory (BTI and the shorter Ten-Item Personality Inventory (TIPI. Motivation for the study: Researchers have indicated a need for shorter personality measures, such as the TIPI, to assess personality dimensions. This study assessed the validity of the shorter measure in comparison with the BTI, which is considered cross-culturally valid in the South African context. Research approach, design and method: This study used a quantitative research design. Both personality measures were administered manually to a convenience sample of student participants (n = 662, and data were analysed through factor analysis utilising oblique rotation for all items. Main findings: The main findings indicate that, although the construct validity of both measures was satisfactory, the TIPI yielded unsatisfactory reliability. Practical/managerial implications: The BTI is a more reliable measure than the TIPI, which should only be used when time is limited. Contribution/value-add: In addition to providing insight into how the length of an assessment impacts on the reliability of a measure, this study further reinforces the use of the basic traits inventory as a measure that reliably measures personality in South Africa.

Construction Worker Fatigue Prediction Model Based on System Dynamic

Directory of Open Access Journals (Sweden)

Wahyu Adi Tri Joko

2017-01-01

Full Text Available Construction accident can be caused by internal and external factors such as worker fatigue and unsafe project environment. Tight schedule of construction project forcing construction worker to work overtime in long period. This situation leads to worker fatigue. This paper proposes a model to predict construction worker fatigue based on system dynamic (SD. System dynamic is used to represent correlation among internal and external factors and to simulate level of worker fatigue. To validate the model, 93 construction workers whom worked in a high rise building construction projects, were used as case study. The result shows that excessive workload, working elevation and age, are the main factors lead to construction worker fatigue. Simulation result also shows that these factors can increase worker fatigue level to 21.2% times compared to normal condition. Beside predicting worker fatigue level this model can also be used as early warning system to prevent construction worker accident

Self-reliance and innovation to improve the localization ability of nuclear power construction

International Nuclear Information System (INIS)

Wu Chongming

2008-01-01

Construction is a crucial link in the course of design, site selection, construction and operation for a nuclear power plant. The quality during construction directly affects the nuclear safety. And the construction quality involves various aspects including quality culture, feasibility of construction technique, quality assurance, and quality control. Through technical management innovation, great achievements have been made in the civil construction of Unit 3 of Qinshan II Extension Project. As a result, the construction period was shortened and the concrete quality reached the fairfaced concrete standard. (authors)

Construction times and the decommissioning of nuclear power plants

International Nuclear Information System (INIS)

Erramuspe, H.J.

1988-01-01

The construction and the decommissioning periods of nuclear power plants (NPP), are studied, due to their importance in the generation costs. With reference to the construction periods of these plants, a review is made of the situation and technical improvements made in different countries, with the purpose of shortening them. In regard to the decommissioning of NPP, the present and future situations are reviewed in connection with different stages of decommissioning and their related problems, as the residual radioactivity of different components, and the size of the final wastes to be disposed of. The possibilities of plant life extensions are also revised in connection with these problems. Finally, the expected decommissioning costs are analyzed. (Author) [es

Discrimination of Urban Spaces with Different Level of Restorativeness Based on the Original and on a Shorter Version of Hartig et al.’s Perceived Restorativeness Scale

Directory of Open Access Journals (Sweden)

Fátima Negrín

2017-10-01

Full Text Available Restorativeness is defined as the potential of the environment to re-establish certain cognitive capacities related to human information processing. The most frequently used instrument for evaluating the restorativeness of places is the Perceived Restorativeness Scale, proposed by Hartig et al. (1991. Later on, shorter versions of the Perceived Restorativeness Scale were proposed. The aim of this work is to evaluate the discriminatory capacity of the original and of a shorter Spanish version of the PRS, considering urban settings previously selected for having different level of restorativeness, according to expert’s criteria. The study involved 244 students and used a 3 × 2 mixed experimental design, with two independent variables: Restorativeness of a place (between-subjects, which was manipulated by showing pictures of settings selected with varying levels of restorativeness (high, medium, low, and length of the scale (within-subjects, which was manipulated by asking subjects to fill in both the original and a shorter version of the PRS. The order of presentation of the two scales was counterbalanced. Results show an appropriate reliability for both version of the scale. Items of being-away, fascination, and coherence of the shorter scale correlate more strongly with the corresponding factor of the original scale, compared to the others factors. Both scales produce similar values for the perceived restorativeness of the different places, except for places with low restorativeness.

Characterizing the Impact of River Barrage Construction on Stream-Aquifer Interactions, Korea

Directory of Open Access Journals (Sweden)

Yun-Yeong Oh

2016-04-01

Full Text Available This study investigated changes in stream–aquifer interactions during the period shortly after the construction of the Changnyeong-Haman River barrage (CHRB on the Nakdong River in South Korea. The hydraulic diffusivity (α and river resistance (R values at the semipervious stream–aquifer interface were estimated by using a one-dimensional (1-D analytical solution with Fourier transform (FT. Prior to the application of the 1-D analytical solution, the noise effects on the groundwater levels were removed by using fast Fourier transform and low-pass filtering techniques. Sinusoidal variation of the river stages was applied to the 1-D analytical solution. For the study period, the R values showed a decreasing trend, while the α values showed an increasing trend, and results showed that the average of the median values of flood duration times (td and flood amplitudes were reduced to 78% and 59%, respectively. Moreover, the ratio of flood peak time to td demonstrated a decreasing tendency after the construction of the CHRB. Hence, it is concluded that the dredging and increase of river-water storage due to CHRB construction enhanced stream–aquifer interactions during the period shortly after the construction of the CHRB.

Constructing the truth: from 'confusion of tongues' to 'constructions in analysis'.

Science.gov (United States)

Press, Jacques

2006-04-01

The author hypothesizes that the papers Freud wrote in the period 1934-9 constitute a final turning point in his work resulting from an attempt to work through, by means of self-analysis, early traumatic elements reactivated by the conditions of his life in the 1930s. The author emphasizes that the ups and downs of Freud's relationship with Sándor Ferenczi and the mourning which followed his death in 1933 played an important role in this traumatic situation. He suggests that through these last works, Freud pursued a posthumous dialogue with Ferenczi. This working through led Freud, in Moses and monotheism, to an ultimate revision of his theory of trauma, a revision which the author examines in full, in the light of the works of the Egyptologist, Jan Assmann. A new analytical paradigm emerges: that of constructions in analysis developed in the article of the same name. The activity of construction appears as an alternative to the mutual analysis proposed by Ferenczi and is closely bound up with the notion of historical truth. In psychoanalysis, it would mean constructing a historical truth whose anchoring in the material truth of the past is essential, though it should not be confused with it.

Marital disruption is associated with shorter salivary telomere length in a probability sample of older adults.

Science.gov (United States)

Whisman, Mark A; Robustelli, Briana L; Sbarra, David A

2016-05-01

Marital disruption (i.e., marital separation, divorce) is associated with a wide range of poor mental and physical health outcomes, including increased risk for all-cause mortality. One biological intermediary that may help explain the association between marital disruption and poor health is accelerated cellular aging. This study examines the association between marital disruption and salivary telomere length in a United States probability sample of adults ≥50 years of age. Participants were 3526 individuals who participated in the 2008 wave of the Health and Retirement Study. Telomere length assays were performed using quantitative real-time polymerase chain reaction (qPCR) on DNA extracted from saliva samples. Health and lifestyle factors, traumatic and stressful life events, and neuroticism were assessed via self-report. Linear regression analyses were conducted to examine the associations between predictor variables and salivary telomere length. Based on their marital status data in the 2006 wave, people who were separated or divorced had shorter salivary telomeres than people who were continuously married or had never been married, and the association between marital disruption and salivary telomere length was not moderated by gender or neuroticism. Furthermore, the association between marital disruption and salivary telomere length remained statistically significant after adjusting for demographic and socioeconomic variables, neuroticism, cigarette use, body mass, traumatic life events, and other stressful life events. Additionally, results revealed that currently married adults with a history of divorce evidenced shorter salivary telomeres than people who were continuously married or never married. Accelerated cellular aging, as indexed by telomere shortening, may be one pathway through which marital disruption is associated with morbidity and mortality. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Domain-specific Framework for Automated Construction and Verification of Railway Control Systems

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth

2009-01-01

in a demand for a higher degree of automation for the development verification, validation and test phases of projects, without impairing the thoroughness of safety-related quality measures and certification activities. Motivated by these considerations, this presentation describes an approach for automated...... elaborate safety mechanisms in order to keep the risk at the same low level that has been established for European railways until today. The challenge is further increased by the demand for shorter time-to-market periods and higher competition among suppliers of the railway domain; both factors resulting...

An assessment of the performance of municipal constructed wetlands in Ireland.

Science.gov (United States)

Hickey, Anthony; Arnscheidt, Joerg; Joyce, Eadaoin; O'Toole, James; Galvin, Gerry; O' Callaghan, Mark; Conroy, Ken; Killian, Darran; Shryane, Tommy; Hughes, Francis; Walsh, Katherine; Kavanagh, Emily

2018-03-15

While performance assessments of constructed wetlands sites around the world have appraised their capacity for effective removal of organics, a large variance remains in these sites' reported ability to retain nutrients, which appears to depend on differences in design, operation and climate factors. Nutrient retention is a very important objective for constructed wetlands, to avoid eutrophication of aquatic environments receiving their effluents. This study assessed the performance of constructed wetlands in terms of nutrient retention and associated parameters under the humid conditions of Ireland's temperate maritime climate. A review of the performance of 52 constructed wetland sites from 17 local authorities aimed to identify the best performing types of constructed wetlands and the treatment factors determining successful compliance with environmental standards. Data analysis compared effluent results from constructed wetlands with secondary free surface flow or tertiary horizontal subsurface flow, hybrid systems and integrated constructed wetlands with those from small-scale mechanical wastewater treatment plants of the same size class. Nutrient concentrations in effluents of constructed wetlands were negatively correlated (p treatment performance of constructed wetlands significantly (p wastewater treatment plants, secondary free surface water and tertiary horizontal subsurface flow wetlands showed a very large variance in effluent concentrations for organic and nutrient parameters. E. coli numbers in effluents were lowest for integrated constructed wetlands with an arithmetic mean of 89 MPN/100 ml. Despite Ireland's humid climate, some constructed wetland sites achieved long or frequent periods of zero effluent discharge and thus did not transfer any waterborne pollution to their receptors during these periods. Copyright © 2018 Elsevier Ltd. All rights reserved.

3D Bioprinting of Carboxymethylated-Periodate Oxidized Nanocellulose Constructs for Wound Dressing Applications.

Science.gov (United States)

Rees, Adam; Powell, Lydia C; Chinga-Carrasco, Gary; Gethin, David T; Syverud, Kristin; Hill, Katja E; Thomas, David W

2015-01-01

Nanocellulose has a variety of advantages, which make the material most suitable for use in biomedical devices such as wound dressings. The material is strong, allows for production of transparent films, provides a moist wound healing environment, and can form elastic gels with bioresponsive characteristics. In this study, we explore the application of nanocellulose as a bioink for modifying film surfaces by a bioprinting process. Two different nanocelluloses were used, prepared with TEMPO mediated oxidation and a combination of carboxymethylation and periodate oxidation. The combination of carboxymethylation and periodate oxidation produced a homogeneous material with short nanofibrils, having widths material with good rheological properties for use as a bioink. The nanocellulose bioink was thus used for printing 3D porous structures, which is exemplified in this study. We also demonstrated that both nanocelluloses did not support bacterial growth, which is an interesting property of these novel materials.

Interspecific studies of circadian genes period and timeless in Drosophila.

Science.gov (United States)

Noreen, Shumaila; Pegoraro, Mirko; Nouroz, Faisal; Tauber, Eran; Kyriacou, Charalambos P

2018-03-30

The level of rescue of clock function in genetically arrhythmic Drosophila melanogaster hosts using interspecific clock gene transformation was used to study the putative intermolecular coevolution between interacting clock proteins. Among them PER and TIM are the two important negative regulators of the circadian clock feedback loop. We transformed either the D. pseudoobscura per or tim transgenes into the corresponding arrhythmic D. melanogaster mutant (per01 or tim01) and observed >50% rhythmicity but the period of activity rhythm was either longer (D. pseudoobscura-per) or shorter than 24 h (D. pseudoobscura-tim) compared to controls. By introducing both transgenes simultaneously into double mutants, we observed that the period of the activity rhythm was rescued by the pair of hemizygous transgenes (~24 h). These flies also showed a more optimal level of temperature compensation for the period. Under LD 12:12 these flies have a D. pseudoobscura like activity profile with the absence of morning anticipation as well as a very prominent earlier evening peak of activity rhythm. These observation are consistent with the view that TIM and PER form a heterospecific coevolved module at least for the circadian period of activity rhythms. However the strength of rhythmicity was reduced by having both transgenes present, so while evidence for a coevolution between PER and TIM is observed for some characters it is not for others. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

Risky family processes prospectively forecast shorter telomere length mediated through negative emotions.

Science.gov (United States)

Brody, Gene H; Yu, Tianyi; Shalev, Idan

2017-05-01

This study was designed to examine prospective associations of risky family environments with subsequent levels of negative emotions and peripheral blood mononuclear cell telomere length (TL), a marker of cellular aging. A second purpose was to determine whether negative emotions mediate the hypothesized link between risky family processes and diminished telomere length. Participants were 293 adolescents (age 17 years at the first assessment) and their primary caregivers. Caregivers provided data on risky family processes when the youths were age 17 years, youths reported their negative emotions at age 18 years, and youths' TL was assayed from a blood sample at age 22 years. The results revealed that (a) risky family processes forecast heightened negative emotions (β = .316, p emotions forecast shorter TL (β = -.187, p = .012), and (c) negative emotions served as a mediator connecting risky family processes with diminished TL (indirect effect = -0.012, 95% CI [-0.036, -0.002]). These findings are consistent with the hypothesis that risky family processes presage premature cellular aging through effects on negative emotions, with potential implications for lifelong health. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Design of Long Period Pseudo-Random Sequences from the Addition of m -Sequences over 𝔽 p

Directory of Open Access Journals (Sweden)

Ren Jian

2004-01-01

Full Text Available Pseudo-random sequence with good correlation property and large linear span is widely used in code division multiple access (CDMA communication systems and cryptology for reliable and secure information transmission. In this paper, sequences with long period, large complexity, balance statistics, and low cross-correlation property are constructed from the addition of m -sequences with pairwise-prime linear spans (AMPLS. Using m -sequences as building blocks, the proposed method proved to be an efficient and flexible approach to construct long period pseudo-random sequences with desirable properties from short period sequences. Applying the proposed method to 𝔽 2 , a signal set ( ( 2 n − 1 ( 2 m − 1 , ( 2 n + 1 ( 2 m + 1 , ( 2 ( n + 1 / 2 + 1 ( 2 ( m + 1 / 2 + 1 is constructed.

Construction of special structures for nuclear power projects

International Nuclear Information System (INIS)

Raghavan, N.

2003-01-01

Construction is a very important stage in the course of realization of Nuclear Power Projects and as much care has be devoted to this stage as to the planning and engineering stages. While the setting up of nuclear power projects used to take over seven years in the past, the time period has now been considerably reduced to about five years with advancements in construction engineering, project management and design techniques, on the basis of new initiatives from the owner agency, Nuclear Power Corporation of India. In this article, the constructional aspects of the specialized structures for nuclear power generation are looked into. (author)

Construction techniques and management methods for BWR plants

International Nuclear Information System (INIS)

Shimizu, Yohji; Tateishi, Mizuo; Hayashi, Yoshishige

1989-01-01

Toshiba is constantly striving for safer and more efficient plant construction to realize high-quality BWR plants within a short construction period. To achieve these aims, Toshiba has developed and improved a large number of construction techniques and construction management methods. In the area of installation, various techniques have been applied such as the modularization of piping and equipment, shop installation of reactor internals, etc. Further, installation management has been upgraded by the use of pre-installation review programs, the development of installation control systems, etc. For commissioning, improvements in commissioning management have been achieved through the use of computer systems, and testing methods have also been upgraded by the development of computer systems for the recording and analysis of test data and the automatic adjustment of controllers in the main control system of the BWR. This paper outlines these construction techniques and management methods. (author)

The Fermi-Pasta-Ulam Model Periodic Solutions

CERN Document Server

Arioli, G; Terracini, S

2003-01-01

We introduce two novel methods for studying periodic solutions of the FPU beta-model, both numerically and rigorously. One is a variational approach, based on the dual formulation of the problem, and the other involves computer-assisted proofs. These methods are used e.g. to construct a new type of solutions, whose energy is spread among several modes, associated with closely spaced resonances.

Design and construction of nuclear power plants

CERN Document Server

Schnell, Jürgen; Meiswinkel, Rüdiger; Bergmeister, Konrad; Fingerloos, Frank; Wörner, Johann-Dietrich

2013-01-01

Despite all the efforts being put into expanding renewable energy sources, large-scale power stations will be essential as part of a reliable energy supply strategy for a longer period. Given that they are low on CO2 emissions, many countries are moving into or expanding nuclear energy to cover their baseload supply.Building structures required for nuclear installations whose protective function means they are classified as safety-related, have to meet particular construction requirements more stringent than those involved in conventional construction. This book gives a comprehensive overv

FORECASTING ENERGY CONSUMPTION IN SHORT-TERM AND LONG-TERM PERIOD BY USING ARIMAX MODEL IN THE CONSTRUCTION AND MATERIALS SECTOR IN THAILAND

Directory of Open Access Journals (Sweden)

Pruethsan Sutthichaimethee

2017-07-01

Full Text Available This study aims to analyze the forecasting of energy consumption in the Construction and Materials sectors. The scope of the study covers the forecasting periods of energy consumption for the next 10 years, 2017-2026, 20 years, 2017-2036, and 30 years, 2017-2046, by using ARIMAX Model. The prediction results show that these models are effective in the forecast measured by RMSE, MAE, and MAPE. The results show that from the first model (2,1,1, which predicted the duration of 10 years, 2017-2026, indicates that Thailand has increased an energy consumption rate with the average of 18.09%, while the second model (2,1,2 with the prediction of 20 years, 2017-2036, Thailand arises its energy consumption up to 37.32%. In addition, the third model (2,1,3 predicted the duration of 30 years from 2017 to 2046, and it has found that Thailand increases its energy consumption up to 49.72%.

Construction of an access shaft for LEP

CERN Document Server

1983-01-01

The main contract for underground work in the plain was signed end of February 1983. It foresaw a five-month preparation period before the order to start construction work could be issued. The latter was delivered on 1 September. See Annual Report 1983 p. 114

Rethinking Constructive Journalism by Means of Service Journalism

DEFF Research Database (Denmark)

From, Unni; Kristensen, Nete Nørgaard

2018-01-01

This article argues that constructive journalism scholarship should look to service journalism and its subfields, cultural journalism and lifestyle journalism, to understand key characteristics of this newer type of journalism. Though constructive journalism is typically associated...... with the reporting of political and social issues, it is also seen to challenge traditional ways of writing about such hard news topics due to its positive and solution-oriented approach. In this respect, constructive journalism seems to reuse some of the approaches known from service journalism, especially in terms...... of audience address and an expanded social role for journalists. However, service journalism emerged in the increasingly commercialized and globalized media landscape of the post-WW2-period, whereas constructive journalism has emerged in the digital media landscape of the 2010s. These historical contexts...

Machine Learning for Slow but Steady Interplanetary Construction

Science.gov (United States)

Agogino, Adrian

2017-01-01

For prolonged manned missions to destinations such as the moon and Mars, there is a need for significant infrastructure construction ahead of time, such as habitats and landing pads. Unfortunately we have little experience in remote construction and using conventional methods is likely to be expensive, cumbersome and unreliable. Fortunately these challenges may be overcome by taking advantage of the long lead time for such missions and using teams of small and slow construction robots. We propose using teams of simple autonomous robots for this purpose that would perform continuous construction over a period of many years or even decades. While individual robot reliability will be low over such long time frames, system reliability will be maintained by using machine learning over simulations to achieve coordination and reconfigurations in the event of lost robots.

Recognition method of construction conflict based on driver's eye movement.

Science.gov (United States)

Xu, Yi; Li, Shiwu; Gao, Song; Tan, Derong; Guo, Dong; Wang, Yuqiong

2018-04-01

Drivers eye movement data in simulated construction conflicts at different speeds were collected and analyzed to find the relationship between the drivers' eye movement and the construction conflict. On the basis of the relationship between the drivers' eye movement and the construction conflict, the peak point of wavelet processed pupil diameter, the first point on the left side of the peak point and the first blink point after the peak point are selected as key points for locating construction conflict periods. On the basis of the key points and the GSA, a construction conflict recognition method so called the CCFRM is proposed. And the construction conflict recognition speed and location accuracy of the CCFRM are verified. The good performance of the CCFRM verified the feasibility of proposed key points in construction conflict recognition. Copyright © 2018 Elsevier Ltd. All rights reserved.

The niche construction perspective: a critical appraisal.

Science.gov (United States)

Scott-Phillips, Thomas C; Laland, Kevin N; Shuker, David M; Dickins, Thomas E; West, Stuart A

2014-05-01

Niche construction refers to the activities of organisms that bring about changes in their environments, many of which are evolutionarily and ecologically consequential. Advocates of niche construction theory (NCT) believe that standard evolutionary theory fails to recognize the full importance of niche construction, and consequently propose a novel view of evolution, in which niche construction and its legacy over time (ecological inheritance) are described as evolutionary processes, equivalent in importance to natural selection. Here, we subject NCT to critical evaluation, in the form of a collaboration between one prominent advocate of NCT, and a team of skeptics. We discuss whether niche construction is an evolutionary process, whether NCT obscures or clarifies how natural selection leads to organismal adaptation, and whether niche construction and natural selection are of equivalent explanatory importance. We also consider whether the literature that promotes NCT overstates the significance of niche construction, whether it is internally coherent, and whether it accurately portrays standard evolutionary theory. Our disagreements reflect a wider dispute within evolutionary theory over whether the neo-Darwinian synthesis is in need of reformulation, as well as different usages of some key terms (e.g., evolutionary process). © 2013 The Author(s). Evolution published by Wiley Periodicals, Inc. on behalf of The Society for the Study of Evolution.

Incidence rates of occupational diseases in the Dutch construction sector, 2010-2014

NARCIS (Netherlands)

van der Molen, Henk F.; de Vries, Sanne C.; Stocks, S. Jill; Warning, Jan; Frings-Dresen, Monique H. W.

2016-01-01

To estimate incidence and trends in incidence of occupational diseases (ODs) in the Dutch construction sector. In a dynamic prospective cohort over a 5-year period (2010-2014), ODs assessed by occupational physicians (OPs) participating in a voluntary construction workers health surveillance (WHS)

On Helmholtz Problem for Plane Periodical Structures

International Nuclear Information System (INIS)

Akishin, P.G.; Vinitskij, S.I.

1994-01-01

The plane Helmholtz problem of the periodical disc structures with the phase shifts conditions of the solutions along the basis lattice vectors and the Dirichlet conditions on the basic boundaries is considered. The Green function satisfying the quasi periodical conditions on the lattice is constructed. The Helmholtz problem is reduced to the boundary integral equations for the simple layer potentials of this Green function. The methods of the discretization of the arising integral equations are proposed. The procedures of calculation of the matrix elements are discussed. The reality of the spectral parameter of the nonlinear continuous and discretized problems is shown. 8 refs., 2 figs

Bioengineering pediatric scaffold-free auricular cartilaginous constructs.

Science.gov (United States)

Akbari, Pedram; Waldman, Stephen D; Cushing, Sharon L; Papsin, Blake C; Propst, Evan J; Weber, Joanna F; Yeger, Herman; Farhat, Walid A

2017-05-01

The use of exogenous materials as scaffolds in cartilage tissue engineering has limited the clinical application of resultant constructs due to the risk of postoperative complications. In an effort to minimize such complications, we aim to generate human, scaffold-free auricular cartilaginous constructs. Laboratory study using pediatric auricular cartilage. Remnant, normal pediatric auricular cartilage samples that would have otherwise been discarded were collected and digested to free cells. Harvested cells were cultured and expanded in vitro for two passages and plated as micromass cultures. The culture medium was replaced with a chemically defined chondrogenic medium, and cellular monolayers surrounding micromass cultures were continuously scraped off. Constructs were allowed to mature for a period of 8 weeks. Micromass constructs showed mechanical stability and structurally resembled native auricular tissue, with a perichondrium-like layer of cells surrounding the inner cartilaginous zone. Constructs accumulated equivalent sulphated glycosaminoglycan and 50% of collagen content compared to native auricular cartilage by mass, while displaying 156% more cellularity. High-density micromass cultures of pediatric auricular chondrocytes can generate stable cartilaginous constructs following prolonged chondrogenic inductions in vitro. This technique is an essential step toward the development of three-dimensional constructs to recreate clinically applicable auricular cartilaginous constructs. NA. Laryngoscope, 127:E153-E158, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Gentilly 2: design, construction and commissioning

International Nuclear Information System (INIS)

Amyot, Paul; Michel, Benoit.

1982-06-01

Construction of the Gentilly 2 power station is essentially complete, and commissioning is proceeding. The main activities during the 1981-82 period have been the completion of the construction and overall testing of the major systems. One cause of delay in the project in 1981 was the discovery of damage to the tubesheet of a steam generator. An internal manhole cover support in the steam generator head had become loose and had caused damage to the tube-to-tubesheet welds. Repairs to the welds were completed in Feb. 1982 after an extensive development program to qualify the welding procedure. Overall project life will be slightly more than 9 years

Cascading Constrained 2-D Arrays using Periodic Merging Arrays

DEFF Research Database (Denmark)

Forchhammer, Søren; Laursen, Torben Vaarby

2003-01-01

We consider a method for designing 2-D constrained codes by cascading finite width arrays using predefined finite width periodic merging arrays. This provides a constructive lower bound on the capacity of the 2-D constrained code. Examples include symmetric RLL and density constrained codes...

Periodic safety analyses; Les essais periodiques

Energy Technology Data Exchange (ETDEWEB)

Gouffon, A; Zermizoglou, R

1990-12-01

The IAEA Safety Guide 50-SG-S8 devoted to 'Safety Aspects of Foundations of Nuclear Power Plants' indicates that operator of a NPP should establish a program for inspection of safe operation during construction, start-up and service life of the plant for obtaining data needed for estimating the life time of structures and components. At the same time the program should ensure that the safety margins are appropriate. Periodic safety analysis are an important part of the safety inspection program. Periodic safety reports is a method for testing the whole system or a part of the safety system following the precise criteria. Periodic safety analyses are not meant for qualification of the plant components. Separate analyses are devoted to: start-up, qualification of components and materials, and aging. All these analyses are described in this presentation. The last chapter describes the experience obtained for PWR-900 and PWR-1300 units from 1986-1989.

Codes in the codons: construction of a codon/amino acid periodic table and a study of the nature of specific nucleic acid-protein interactions.

Science.gov (United States)

Benyo, B; Biro, J C; Benyo, Z

2004-01-01

The theory of "codon-amino acid coevolution" was first proposed by Woese in 1967. It suggests that there is a stereochemical matching - that is, affinity - between amino acids and certain of the base triplet sequences that code for those amino acids. We have constructed a common periodic table of codons and amino acids, where the nucleic acid table showed perfect axial symmetry for codons and the corresponding amino acid table also displayed periodicity regarding the biochemical properties (charge and hydrophobicity) of the 20 amino acids and the position of the stop signals. The table indicates that the middle (2/sup nd/) amino acid in the codon has a prominent role in determining some of the structural features of the amino acids. The possibility that physical contact between codons and amino acids might exist was tested on restriction enzymes. Many recognition site-like sequences were found in the coding sequences of these enzymes and as many as 73 examples of codon-amino acid co-location were observed in the 7 known 3D structures (December 2003) of endonuclease-nucleic acid complexes. These results indicate that the smallest possible units of specific nucleic acid-protein interaction are indeed the stereochemically compatible codons and amino acids.

Bifurcation analysis of the logistic map via two periodic impulsive forces

International Nuclear Information System (INIS)

Jiang Hai-Bo; Li Tao; Zeng Xiao-Liang; Zhang Li-Ping

2014-01-01

The complex dynamics of the logistic map via two periodic impulsive forces is investigated in this paper. The influences of the system parameter and the impulsive forces on the dynamics of the system are studied respectively. With the parameter varying, the system produces the phenomenon such as periodic solutions, chaotic solutions, and chaotic crisis. Furthermore, the system can evolve to chaos by a cascading of period-doubling bifurcations. The Poincaré map of the logistic map via two periodic impulsive forces is constructed and its bifurcation is analyzed. Finally, the Floquet theory is extended to explore the bifurcation mechanism for the periodic solutions of this non-smooth map. (general)

Standartization and Terminography of New Construction Terms

Directory of Open Access Journals (Sweden)

Zofija Babickienė

2011-06-01

Full Text Available The past ten year period showed the occurance of a great number of new construction terms in the Lithua- nian language. Thus it is necessary to collect and systematize construction terms, terminoids, quasi-terms and standardize them from the point of view of the Standard Lithuanian Language taking into account both logic and terminology requirements. This article deals with modern construction terms from the point of view of the Standard Lithuanian Language including newest data bases saving all actual information on them. The reseach showed that The Dictionary of Construction Terms (2003 ought to be included into The Lithuanian language Term Bank (http://terminai.vlkk.lt. It is necessary to be done for the following reasons. Firstly, because of the creation and standartization as well as sistematization process of new construction terms. Secondly, for the development of continuous scientific discusion and successful professional education. It was established that a certain number of construction terms from the point of view of the Standard Lithuanian Language should be included into new Dictionary of Construction Terms as well as into Term Bank of the Lithuanian Republic. The terms analysed in the article are concerning basement types, pile types, construction joints, also details of walls, roofs, chimneys, construction materials and etc. The analysis showed how different morphological variants and undesirable synonymous terms occur. Finally, the analysis helped to identify that the informal terms mix with formal, standard terms and conclude in incorrect term usage.

The economic and financing viability of the OPR-1000 construction at Muria Peninsula

International Nuclear Information System (INIS)

Moch Djoko Birmano; Mochamad Nasrullah

2005-01-01

The study of the economic and financing viability of the OPR-1000 construction at Muria Peninsula have been done. This study is carried out with steps as follows: updating of newest OPR-1000 technical and economic data; survey of financing sources; the calculation of electricity generation cost, electricity tariff, construction cost of OPR-1000; and calculation of OPR-1000 financing viability by using feasibility criteria such as Net Present Value (NPV), Internal Rate of Return (IRR) and capital payback period. The calculation of generation cost, electricity tariff, construction cost and financing viability criteria (IRR, NPV, Payback Period)by using KEPCO Spread Sheet. From the results of calculations how that the electricity generation cost is 4.0866 cent/kWh, while the electricity tariff is 6.6399 cent/kWh(after Value Added Tax). The total construction cost of OPR-1000 is US $4,092.09 million (included interest and financial fee, excluded initial nuclear fuel). The calculation of financing viability in base case obtained that value of IRR, NPV and Payback Period for total investment is 10.37%. US$90.52 million and 12.11 years respectively. From these results can be concluded that with the electricity tariff of 6.640 cent/kWh or 0.0664 US$/kWh, basically this project of OPR-1000 construction is very feasible and beneficial. From investment side, this project can attract investor because the rate of capital return is high enough, profit in the end of economic life is big enough and payback period is short. (author)

Hearing loss among older construction workers: Updated analyses.

Science.gov (United States)

Dement, John; Welch, Laura S; Ringen, Knut; Cranford, Kim; Quinn, Patricia

2018-04-01

A prior study of this construction worker population found significant noise-associated hearing loss. This follow-up study included a much larger study population and consideration of additional risk factors. Data included audiometry, clinical chemistry, personal history, and work history. Qualitative exposure metrics for noise and solvents were developed. Analyses compared construction workers to an internal reference group with lower exposures and an external worker population with low noise exposure. Among participants (n = 19 127) an overall prevalence of hearing loss of 58% was observed, with significantly increased prevalence across all construction trades. Construction workers had significantly increased risk of hearing loss compared to reference populations, with increasing risk by work duration. Noise exposure, solvent exposure, hypertension, and smoking were significant risk factors in multivariate models. Results support a causal relationship between construction trades work and hearing loss. Prevention should focus on reducing exposure to noise, solvents, and cigarette smoke. © 2018 Wiley Periodicals, Inc.

Response of benthic macroinvertebrate communities to highway construction in an Appalachian watershed

Science.gov (United States)

Hedrick, Lara B.; Welsh, S.A.; Anderson, James T.; Lin, L.-S.; Chen, Y.; Wei, X.

2010-01-01

Highway construction in mountainous areas can result in sedimentation of streams, negatively impacting stream habitat, water quality, and biotic communities. We assessed the impacts of construction of a segment of Corridor H, a four-lane highway, in the Lost River watershed, West Virginia, by monitoring benthic macroinvertebrate communities and water quality, before, during, and after highway construction and prior to highway use at upstream and downstream sites from 1997 through 2007. Data analysis of temporal impacts of highway construction followed a Before-After-Control-Impact (BACI) study design. Highway construction impacts included an increase in stream sedimentation during the construction phase. This was indicated by an increase in turbidity and total suspended solids. Benthic macroinvertebrate metrics indicated a community more tolerant during and after construction than in the period before construction. The percent of Chironomidae and the Hilsenhoff Biotic Index (HBI) increased, while percent of Ephemeroptera, Plecoptera, and Trichoptera (EPT) decreased. Our 10-year study addressed short-term impacts of highway construction and found that impacts were relatively minimal. A recovery of the number of EPT taxa collected after construction indicated that the benthic macroinvertebrate community may be recovering from impacts of highway construction. However, this study only addressed a period of 3 years before, 3 years during, and 4 years post construction. Inferences cannot be made concerning the long-term impacts of the highway, highway traffic, runoff, and other factors associated with highway use. Continual monitoring of the watershed is necessary to determine if the highway has a continual impact on stream habitat, water quality, and biotic integrity. ?? 2010 Springer Science+Business Media B.V.

Effect of various periodic forces on Duffing oscillator

Indian Academy of Sciences (India)

ω respectively. However, the Fourier series of all the forces except the force sin ωt considered in our study have various frequencies. The frequencies present in the forces and in the periodic solution confined to the left well alone corresponding to the amplitude f = 0.2 are studied by constructing the Fourier series. 352.

Soil density and moisture content on two unused forest roads during first 30 months after construction

Science.gov (United States)

J.D. Helvey; J.N. Kochenderfer; J.N. Kochenderfer

1990-01-01

Reports results of soil density and soil moisture measurements on two roads in the central Appalachians over a 30-month period. Density increased slightly during the measurement period at most locations. Almost all of the density changes occurred during the first few months after construction. Moisture content decreased during the first few months after construction,...

Construction method of pre assembled unit of bolt sphere grid

Science.gov (United States)

Hu, L. W.; Guo, F. L.; Wang, J. L.; Bu, F. M.

2018-03-01

The traditional construction of bolt sphere grid has many disadvantages, such as high cost, large amount of work at high altitude and long construction period, in order to make up for these shortcomings, in this paper, a new and applicable construction method is explored: setting up local scaffolding, installing the bolt sphere grid starting frame on the local scaffolding, then the pre assembled unit of bolt sphere grid is assembled on the ground, using small hoisting equipment to lift pre assembled unit to high altitude and install. Compared with the traditional installation method, the construction method has strong practicability and high economic efficiency, and has achieved good social and economic benefits.

Return periods of losses associated with European windstorm series in a changing climate

International Nuclear Information System (INIS)

Karremann, Melanie K; Pinto, Joaquim G; Reyers, Mark; Klawa, Matthias

2014-01-01

Possible future changes of clustering and return periods (RPs) of European storm series with high potential losses are quantified. Historical storm series are identified using 40 winters of reanalysis. Time series of top events (1, 2 or 5 year return levels (RLs)) are used to assess RPs of storm series both empirically and theoretically. Additionally, 800 winters of general circulation model simulations for present (1960–2000) and future (2060–2100) climate conditions are investigated. Clustering is identified for most countries, and estimated RPs are similar for reanalysis and present day simulations. Future changes of RPs are estimated for fixed RLs and fixed loss index thresholds. For the former, shorter RPs are found for Western Europe, but changes are small and spatially heterogeneous. For the latter, which combines the effects of clustering and event ranking shifts, shorter RPs are found everywhere except for Mediterranean countries. These changes are generally not statistically significant between recent and future climate. However, the RPs for the fixed loss index approach are mostly beyond the range of pre-industrial natural climate variability. This is not true for fixed RLs. The quantification of losses associated with storm series permits a more adequate windstorm risk assessment in a changing climate. (letter)

Digital reactor period meter type of NSSG-7

Energy Technology Data Exchange (ETDEWEB)

Glowacki, S W

1981-01-01

The paper presents the idea and electronic circuits of the Digital Reactor Period Meter. The instrument consists of a neutron ionisation chamber, the amplifier logarithming the output chamber current, the circuit taking two samples of the log amplifier output signal and subtracting them, the analog -to -digital dividing circuit and the scaler providing the final information of the reactor period value in seconds and in the digital form. Besides it, the instrument produces the acoustic signal in the case, when the rise-time of neutron flux exceeds the permitted value. The untypical construction of the reactor period meter has been developed to obtain both good measurement accuracy and the resistance against the electromagnetic background pulses interfering with the measuring process. The applied measuring system has been patented.

The existence of periodic solutions for nonlinear beam equations on Td by a para-differential method

Science.gov (United States)

Chen, Bochao; Li, Yong; Gao, Yixian

2018-05-01

This paper focuses on the construction of periodic solutions of nonlinear beam equations on the $d$-dimensional tori. For a large set of frequencies, we demonstrate that an equivalent form of the nonlinear equations can be obtained by a para-differential conjugation. Given the non-resonant conditions on each finite dimensional subspaces, it is shown that the periodic solutions can be constructed for the block diagonal equation by a classical iteration scheme.

New plant construction cost and schedule

International Nuclear Information System (INIS)

Akins, M. J.

2009-01-01

The presentation covers the following topics: cost structure; capital costs; variation of capital costs; trends in power plant construction; studies of costs completion; periods and risks. Nuclear plant costs have recently risen so rapidly that vendors are not willing to publicly commit to cost estimates: ∼ $2000/Kw overnight costs in 2006 in the US market > $4000/Kw and in 2008 in the US market > $6000/Kw in 2008 in emerging markets. There is vendors pricing uncertainty. Current contract models may not apply. Current construction projects have problems: Olkiluoto-3 is reported to be 50% over budget and two years behind schedule, increasing perceptions that nuclear costs will continue to increase rapidly; Price of materials is a big volatile unknown, which may decrease Labor could become more available due to limited number of new projects; Lack of debt/credit to finance new project may decrease demand of new construction

The modularization construction of piping system installation in AP1000 plant

International Nuclear Information System (INIS)

Lu Song; Wang Yuan; Wei Junming

2012-01-01

Modularization construction is the main technique used in AP1000 plants, the piping Modularization installation will impact directly to the module construction as the important part of the Modularization construction. After the piping system has took the modularization design in AP1000 plants, some installation works of piping system has moved from the site to fabrication shop. With improving the construction quality and minimizing the time frame of project, the critical paths can be optimized. This paper has analyzed the risk and challenge that met during the modularization construction period of piping systems though introducing the characteristic of modularization construction for AP1000 piping systems, and get construction experiences from the First AP1000 plants in the world, then it will be the firmly basics for the wide application of modularization construction in the future. (authors)

42 CFR 137.78 - May a Self-Governance Tribe negotiate a funding agreement for a term longer or shorter than one...

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false May a Self-Governance Tribe negotiate a funding agreement for a term longer or shorter than one year? 137.78 Section 137.78 Public Health PUBLIC HEALTH... SERVICES TRIBAL SELF-GOVERNANCE Funding General § 137.78 May a Self-Governance Tribe negotiate a funding...

Feasibility of a shorter Goal Attainment Scaling method for a pediatric spasticity clinic - The 3-milestones GAS.

Science.gov (United States)

Krasny-Pacini, A; Pauly, F; Hiebel, J; Godon, S; Isner-Horobeti, M-E; Chevignard, M

2017-07-01

Goal Attainment Scaling (GAS) is a method for writing personalized evaluation scales to quantify progress toward defined goals. It is useful in rehabilitation but is hampered by the experience required to adequately "predict" the possible outcomes relating to a particular goal before treatment and the time needed to describe all 5 levels of the scale. Here we aimed to investigate the feasibility of using GAS in a clinical setting of a pediatric spasticity clinic with a shorter method, the "3-milestones" GAS (goal setting with 3 levels and goal rating with the classical 5 levels). Secondary aims were to (1) analyze the types of goals children's therapists set for botulinum toxin treatment and (2) compare the score distribution (and therefore the ability to predict outcome) by goal type. Therapists were trained in GAS writing and prepared GAS scales in the regional spasticity-management clinic they attended with their patients and families. The study included all GAS scales written during a 2-year period. GAS score distribution across the 5 GAS levels was examined to assess whether the therapist could reliably predict outcome and whether the 3-milestones GAS yielded similar distributions as the original GAS method. In total, 541 GAS scales were written and showed the expected score distribution. Most scales (55%) referred to movement quality goals and fewer (29%) to family goals and activity domains. The 3-milestones GAS method was feasible within the time constraints of the spasticity clinic and could be used by local therapists in cooperation with the hospital team. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

3D Bioprinting of Carboxymethylated-Periodate Oxidized Nanocellulose Constructs for Wound Dressing Applications

Directory of Open Access Journals (Sweden)

Adam Rees

2015-01-01

Full Text Available Nanocellulose has a variety of advantages, which make the material most suitable for use in biomedical devices such as wound dressings. The material is strong, allows for production of transparent films, provides a moist wound healing environment, and can form elastic gels with bioresponsive characteristics. In this study, we explore the application of nanocellulose as a bioink for modifying film surfaces by a bioprinting process. Two different nanocelluloses were used, prepared with TEMPO mediated oxidation and a combination of carboxymethylation and periodate oxidation. The combination of carboxymethylation and periodate oxidation produced a homogeneous material with short nanofibrils, having widths <20 nm and lengths <200 nm. The small dimensions of the nanofibrils reduced the viscosity of the nanocellulose, thus yielding a material with good rheological properties for use as a bioink. The nanocellulose bioink was thus used for printing 3D porous structures, which is exemplified in this study. We also demonstrated that both nanocelluloses did not support bacterial growth, which is an interesting property of these novel materials.

The long view: Causes of climate change over the instrumental period

Science.gov (United States)

Hegerl, G. C.; Schurer, A. P.; Polson, D.; Iles, C. E.; Bronnimann, S.

2016-12-01

The period of instrumentally recorded data has seen remarkable changes in climate, with periods of rapid warming, and periods of stagnation or cooling. A recent analysis of the observed temperature change from the instrumental record confirms that most of the warming recorded since the middle of the 20rst century has been caused by human influences, but shows large uncertainty in separating greenhouse gas from aerosol response if accounting for model uncertainty. The contribution by natural forcing and internal variability to the recent warming is estimated to be small, but becomes more important when analysing climate change over earlier or shorter time periods. For example, the enigmatic early 20th century warming was a period of strong climate anomalies, including the US dustbowl drought and exceptional heat waves, and pronounced Arctic warming. Attribution results suggests that about half of the global warming 1901-1950 was forced by greenhouse gases increases, with an anomalously strong contribution by climate variability, and contributions by natural forcing. Long term variations in circulation are important for some regional climate anomalies. Precipitation is important for impacts of climate change and precipitation changes are uncertain in models. Analysis of the instrumental record suggests a human influence on mean and heavy precipitation, and supports climate model estimates of the spatial pattern of precipitation sensitivity to warming. Broadly, and particularly over ocean, wet regions are getting wetter and dry regions are getting drier. In conclusion, the historical record provides evidence for a strong response to external forcings, supports climate models, and raises questions about multi-decadal variability.

Period functions for Maass wave forms and cohomology

CERN Document Server

Bruggeman, R; Zagier, D; Bruggeman, R W; Zagier, D

2015-01-01

The authors construct explicit isomorphisms between spaces of Maass wave forms and cohomology groups for discrete cofinite groups \\Gamma\\subset\\mathrm{PSL}_2({\\mathbb{R}}). In the case that \\Gamma is the modular group \\mathrm{PSL}_2({\\mathbb{Z}}) this gives a cohomological framework for the results in Period functions for Maass wave forms. I, of J. Lewis and D. Zagier in Ann. Math. 153 (2001), 191-258, where a bijection was given between cuspidal Maass forms and period functions. The authors introduce the concepts of mixed parabolic cohomology group and semi-analytic vectors in principal serie

A construction process model for implementing constructability in construction

NARCIS (Netherlands)

Langkemper, J.; Al-Jibouri, S.; Reymen, I.M.M.J.; Maas, G.J.; Gassel, van F.

2003-01-01

In construction, failure of design professionals to consider how a builder will implement the design can result in scheduling problems, cost escalation, delays and disputes during the construction process. The integration of construction knowledge and experience during planning and design is termed

Spiking mode operation for a uniform-period wiggler

International Nuclear Information System (INIS)

Warren, R.W.; Goldstein, J.C.; Newnam, B.E.

1985-01-01

The onset of saturation in a uniform-period wiggler has been examined experimentally and through numerical simulations. Models have been constructed that explain the observations in simple and consistent ways. The models are based upon the development of strong frequency and amplitude modulation of the optical wave as a way to increase extraction efficiency and optical power

Construction and modernization of underground and surface mines. [USSR

Energy Technology Data Exchange (ETDEWEB)

Burshtein, N M

1983-12-01

Development of the Sredazugol' association in Soviet Central Asia from 1976 to 1985 is discussed. From 1976 to 1980 investment in the association amounted to 151 million rubles, 87.5 million of which fell on construction. Major development projects of the 1976-1980 period are reviewed: construction of new mining levels in underground coal mines, development of a number of operating surface mines, modernization of earthmoving and mining equipment, development of mine haulage by locomotives and railroad cars, improving occupational safety in coal mining, increasing slope stability in surface mining, especially in the area of the Atchinsk landslide in the Angren mine. From 1981 to 1985 investment in the Sredazugol' association should amount to 202 million rubles, of which 126 million rubles will be spent on construction. Investment will be 35% higher than in the 1976-1980 period and investment in mine construction 43% higher. The largest development project will be modernization of the Angren surface mine and increasing its targeted coal output from 5.2 Mt/y to 10.3 Mt/y by 1990. Modernization and reconstruction of the Angren mine will be carried out in 2 stages. Coal output of the mine will increase by 1.2 Mt/y in the current 5 year plan (by 1985), and by 3.9 Mt/y in the next 5 year period. Reconstruction and development of the Angren mine will cost approximately 254 million rubles. Mining and earthmoving equipment which will be used in the Angren mine is reviewed: EhRGV-630 bucket wheel excavators, EhSh-10/70 and EhSh-13/50 walking draglines, etc.

On a Five-Dimensional Nonautonomous Schistosomiasis Model with Latent Period

Directory of Open Access Journals (Sweden)

Shujing Gao

2016-01-01

Full Text Available A five-dimensional nonautonomous schistosomiasis model which include latent period is proposed and studied. By constructing several auxiliary functions and using some skills, we obtain some sufficient conditions for the extinction and permanence (uniform persistence of infectious population of the model. New threshold values of integral form are obtained. For the corresponding autonomous schistosomiasis model, our results are consistent with the past results. For the periodic and almost periodic cases, some corollaries for the extinction and permanence of the disease are established. In order to illustrate our theoretical analysis, some numerical simulations are presented.

On exponential stability and periodic solutions of CNNs with delays

Science.gov (United States)

Cao, Jinde

2000-03-01

In this Letter, the author analyses further problems of global exponential stability and the existence of periodic solutions of cellular neural networks with delays (DCNNs). Some simple and new sufficient conditions are given ensuring global exponential stability and the existence of periodic solutions of DCNNs by applying some new analysis techniques and constructing suitable Lyapunov functionals. These conditions have important leading significance in the design and applications of globally stable DCNNs and periodic oscillatory DCNNs and are weaker than those in the earlier works [Phys. Rev. E 60 (1999) 3244], [J. Comput. Syst. Sci. 59 (1999)].

[Research on the hospital construction and structure in Daehan empire and colonial modern period].

Science.gov (United States)

Han, Dong Gwan; Ryu, Chang Ug; Ko, Sang Kyun; Jung, Jae Kook; Moon, Jong Youn; Park, Yoon Hyung

2011-12-31

It was the late Chosun Dynasty and Daehan Empire era that Western Medicine has firstly been introduced to Korea, previously operating on a basis of Korean traditional medicine. Western Medicine has been introduced by American missionary and Japanese Imperialism. An introduction of Western Medicine made it feasible to proceed new type medical care including operation, leading to require a new form of medical facilities. In the beginning, new facilities were constructed by Japanese Imperialism. Other hand many of facilities including Severance Hospital were established by missionaries. First of all, Daehan Empire established and managed a modern type of medical facility named "Jejoongwon" in 1885 as a government institution hospital. The Red Cross Hospital built in 1889. Afterwards, Jejoongwon and the Red Cross Hospital were taken over to missionary hospital and Japanese Imperialism, respectively. Japanese Imperialists firstly have protected their nationals residing in Chosun but have proceeded care a few Chosun people to exploit medical treatment as a mean to advertise superiority of the Empire of Japan. The facility that has firstly been established and managed was Jeseang Hospital in Busan in 1877, leading to establish in Wonju, Wonsan, and Mokpo. Afterwards, Japan has organized "Donginhoi" as a civil invasion organization, leading for "Donginhoi" to established "Dongin Hospital" in Pyeongyang, Daegu, and Seoul. Since 1909, governmental leading medical facility named Jahye Hospital was established according to an imperial order, leading to establish 32 hospitals all over the nation. American missionaries have established and managed 28 hospitals started from Severance Hospital built in 1904. However, Chosun doctors started to having educated and opening up their own hospital since 1920, leading for many of medical facilities to be established, but most of them have taken different roles followed by 6.25 War and economic development period. However, some of them

"Taller and Shorter": Human 3-D Spatial Memory Distorts Familiar Multilevel Buildings.

Directory of Open Access Journals (Sweden)

Thomas Brandt

Full Text Available Animal experiments report contradictory findings on the presence of a behavioural and neuronal anisotropy exhibited in vertical and horizontal capabilities of spatial orientation and navigation. We performed a pointing experiment in humans on the imagined 3-D direction of the location of various invisible goals that were distributed horizontally and vertically in a familiar multilevel hospital building. The 21 participants were employees who had worked for years in this building. The hypothesis was that comparison of the experimentally determined directions and the true directions would reveal systematic inaccuracy or dimensional anisotropy of the localizations. The study provides first evidence that the internal representation of a familiar multilevel building was distorted compared to the dimensions of the true building: vertically 215% taller and horizontally 51% shorter. This was not only demonstrated in the mathematical reconstruction of the mental model based on the analysis of the pointing experiments but also by the participants' drawings of the front view and the ground plan of the building. Thus, in the mental model both planes were altered in different directions: compressed for the horizontal floor plane and stretched for the vertical column plane. This could be related to human anisotropic behavioural performance of horizontal and vertical navigation in such buildings.

"Taller and Shorter": Human 3-D Spatial Memory Distorts Familiar Multilevel Buildings.

Science.gov (United States)

Brandt, Thomas; Huber, Markus; Schramm, Hannah; Kugler, Günter; Dieterich, Marianne; Glasauer, Stefan

2015-01-01

Animal experiments report contradictory findings on the presence of a behavioural and neuronal anisotropy exhibited in vertical and horizontal capabilities of spatial orientation and navigation. We performed a pointing experiment in humans on the imagined 3-D direction of the location of various invisible goals that were distributed horizontally and vertically in a familiar multilevel hospital building. The 21 participants were employees who had worked for years in this building. The hypothesis was that comparison of the experimentally determined directions and the true directions would reveal systematic inaccuracy or dimensional anisotropy of the localizations. The study provides first evidence that the internal representation of a familiar multilevel building was distorted compared to the dimensions of the true building: vertically 215% taller and horizontally 51% shorter. This was not only demonstrated in the mathematical reconstruction of the mental model based on the analysis of the pointing experiments but also by the participants' drawings of the front view and the ground plan of the building. Thus, in the mental model both planes were altered in different directions: compressed for the horizontal floor plane and stretched for the vertical column plane. This could be related to human anisotropic behavioural performance of horizontal and vertical navigation in such buildings.

TIA model is attainable in Wistar rats by intraluminal occlusion of the MCA for 10min or shorter.

Science.gov (United States)

Durukan Tolvanen, A; Tatlisumak, E; Pedrono, E; Abo-Ramadan, U; Tatlisumak, T

2017-05-15

Transient ischemic attack (TIA) has received only little attention in the experimental research field. Recently, we introduced a TIA model for mice, and here we set similar principles for simulating this human condition in Wistar rats. In the model: 1) transient nature of the event is ensured, and 2) 24h after the event animals are free from any sensorimotor deficit and from any detectable lesion by magnetic resonance imaging (MRI). Animals experienced varying durations of ischemia (5, 10, 12.5, 15, 25, and 30min, n=6-8pergroup) by intraluminal middle cerebral artery occlusion (MCAO). Ischemia severity and reperfusion rates were controlled by cerebral blood flow measurements. Sensorimotor neurological evaluations and MRI at 24h differentiated between TIA and ischemic stroke. Hematoxylin and eosin staining and apoptotic cell counts revealed pathological correlates of the event. We found that already 12.5min of ischemia was long enough to induce ischemic stroke in Wistar rats. Ten min or shorter durations induced neither gross neurological deficits nor infarcts visible on MRI, but histologically caused selective neuronal necrosis. A separate group of animals with 10min of ischemia followed up to 1week after reperfusion remained free of infarction and any MRI signal change. Thus, 10min or shorter focal cerebral ischemia induced by intraluminal MCAO in Wistar rats provides a clinically relevant TIA the rat. This model is useful for studying molecular correlates of TIA. Copyright © 2017 Elsevier B.V. All rights reserved.

Short-term effects of the construction of wind turbines on harbour porpoises at Horns Reef

Energy Technology Data Exchange (ETDEWEB)

Tougaard, J. [Hedeselskabet, Miljoe og Energi A/S, Viborg(Denmark); Carstensen, Jakob [National Environmental Res. Inst., Dept. of Marine Ecology, Roskidle (Denmark); Damsgaard Henriksen, O.; Teilmann, J. [National Environmental Res. Inst., Dept. of Arctic Biology, Roskilde (Denmark)

2003-04-15

In 2002 the Worlds largest offshore wind farm, consisting of 80 2MW wind turbines, was constructed on Horns Reef in the Danish North Sea. Ship based visual surveys and long-term deployment of acoustic dataloggers (PODs) were used to assess short term effects of construction on behaviour and abundance of harbour porpoises (Phocoena phocoena). Most focus was put on mounting of steel monopile foundations for the turbines, as they were rammed into the seabed. This type of operation is known to generate very loud underwater sound levels. Combined evidence from animal densities obtained from visual surveys, behavioural observations during surveys and acoustic activity data in and outside the construction area demonstrated effects on the behaviour and abundance of animals on both short-term (hours) and long term (entire construction period) scales. Acoustic activity by the porpoises decreased dramatically on the entire Horns Reef at the onset of ramming operations and returned to higher levels a few hours after each ramming operation was completed. A reduction in abundance close to ramming operations was anticipated, as deterring devices (pingers and seal scarers) were deployed prior to each ramming operation to deter marine mammals from the area and thus protect them from exposure to the loud sound levels generated by the ramming procedure. The changes in abundance and behaviour over large distances are unlikely to be explained by the deterring sounds, which have comparably lower intensities than the ramming sounds and these effects must be attributed to the ramming. A general effect on the behaviour of animals was seen during the construction period and at distances of up to 10-15 kilometers from the construction site. Compared to observations before and after construction there was a decrease in non-directional swimming, a behaviour assumed to correlate with feeding activity. Animal density estimates indicates that there were fewer animals present on the entire Horns

Short-term effects of the construction of wind turbines on harbour porpoises at Horns Reef

International Nuclear Information System (INIS)

Tougaard, J.; Carstensen, Jakob; Damsgaard Henriksen, O.; Teilmann, J.

2003-04-01

In 2002 the Worlds largest offshore wind farm, consisting of 80 2MW wind turbines, was constructed on Horns Reef in the Danish North Sea. Ship based visual surveys and long-term deployment of acoustic dataloggers (PODs) were used to assess short term effects of construction on behaviour and abundance of harbour porpoises (Phocoena phocoena). Most focus was put on mounting of steel monopile foundations for the turbines, as they were rammed into the seabed. This type of operation is known to generate very loud underwater sound levels. Combined evidence from animal densities obtained from visual surveys, behavioural observations during surveys and acoustic activity data in and outside the construction area demonstrated effects on the behaviour and abundance of animals on both short-term (hours) and long term (entire construction period) scales. Acoustic activity by the porpoises decreased dramatically on the entire Horns Reef at the onset of ramming operations and returned to higher levels a few hours after each ramming operation was completed. A reduction in abundance close to ramming operations was anticipated, as deterring devices (pingers and seal scarers) were deployed prior to each ramming operation to deter marine mammals from the area and thus protect them from exposure to the loud sound levels generated by the ramming procedure. The changes in abundance and behaviour over large distances are unlikely to be explained by the deterring sounds, which have comparably lower intensities than the ramming sounds and these effects must be attributed to the ramming. A general effect on the behaviour of animals was seen during the construction period and at distances of up to 10-15 kilometers from the construction site. Compared to observations before and after construction there was a decrease in non-directional swimming, a behaviour assumed to correlate with feeding activity. Animal density estimates indicates that there were fewer animals present on the entire Horns

Periodic thermodynamics of laser-driven molecular motor

International Nuclear Information System (INIS)

Li Dan; Zheng Wenwei; Wang Zhisong

2008-01-01

Operation of a laser-driven nano-motor inevitably generates a non-trivial amount of heat, which can possibly lead to instability or even hinder the motor's continual running. This work quantitatively examines the overheating problem for a recently proposed laser-operated molecular locomotive. We present a single-molecule cooling theory, in which molecular details of the locomotive system are explicitly treated. This theory is able to quantitatively predict cooling efficiency for various candidates of molecular systems for the locomotive, and also suggests concrete strategies for improving the locomotive's cooling. It is found that water environment is able to cool the hot locomotive down to room temperature within 100 picoseconds after photon absorption. This cooling time is a few orders of magnitude shorter than the typical time for laser operation, effectively preventing any overheating for the nano-locomotive. However, when the cooling is less effective in non-aqueous environment, residual heat may build up. A continuous running of the motor will then lead to a periodic thermodynamics, which is a common character of many laser-operated nano-devices

Shorter epilepsy duration is associated with better seizure outcome in temporal lobe epilepsy surgery

Directory of Open Access Journals (Sweden)

Lucas Crociati Meguins

2015-03-01

Full Text Available Objective To investigate the influence of patient’s age and seizure onset on surgical outcome of temporal lobe epilepsy (TLE. Method A retrospective observational investigation performed from a cohort of patients from 2000 to 2012. Results A total of 229 patients were included. One-hundred and eleven of 179 patients (62% were classified as Engel I in the group with < 50 years old, whereas 33 of 50 (66% in the group with ≥ 50 years old group (p = 0.82. From those Engel I, 88 (61% reported epilepsy duration inferior to 10 years and 56 (39% superior to 10 years (p < 0.01. From the total of patients not seizure free, 36 (42% reported epilepsy duration inferior to 10 years and 49 (58% superior to 10 years (p < 0.01. Conclusion Patients with shorter duration of epilepsy before surgery had better postoperative seizure control than patients with longer duration of seizures.

Contracting Economics of Large Engineering and Construction Projects

NARCIS (Netherlands)

Berends, T.C.

2007-01-01

Large Engineering and Construction Projects (LECPs) form an important area of economic activity, covering a range of different artefacts. These projects have in common that they are massive undertakings, spanning long time periods and they involve large capital investments. Uncertainty and risk are

Impacts of cooling intervention on the heat strain attenuation of construction workers.

Science.gov (United States)

Zhao, Yijie; Yi, Wen; Chan, Albert P C; Wong, Del P

2018-05-25

This study aimed to evaluate the effectiveness and practicality of a cooling intervention with a newly designed cooling vest on heat strain attenuation in the construction industry. Fourteen construction workers volunteered to participate in the field study. Each participant took part in two trials, i.e., cooling and control. Construction work included morning and afternoon sessions. Cooling intervention was implemented for 15 and 30 min during the morning and afternoon rest periods, respectively, between repeated bouts of work. Micrometeorological (wet-bulb globe temperature [WBGT]), physiological (tympanic temperature and heart rate), and perceptual (ratings of perceived exertion [RPE] and thermal sensation) measurements were taken during the test. Heat strain indices, including physiological strain index (PSI HR ) and perceptual strain index (PeSI), were estimated accordingly. During the study, construction workers were exposed to a hot environment with a mean WBGT of 31.56 ± 1.87 °C. Compared with the control, physiological and perceptual strain were significantly reduced in the cooling condition during rest and subsequent work periods (p construction industry. The effectiveness and practicality of a proposed cooling intervention were tested in a field study. Results provide a reference for setting guidelines and promoting application on a range of construction sites.

Shorter Versus Longer Shift Durations to Mitigate Fatigue and Fatigue-Related Risks in Emergency Medical Services Personnel and Related Shift Workers: A Systematic Review

Science.gov (United States)

2018-01-11

Background: This study comprehensively reviewed the literature on the impact of shorter versus longer shifts on critical and important outcomes for Emergency Medical Services (EMS) personnel and related shift worker groups. Methods: Six databases (e....

VARIANT FOR CONSTRUCTION, REPAIR OR RECONSTRUCTION OF BUILDING

Directory of Open Access Journals (Sweden)

S. N. Osipov

2016-01-01

Full Text Available In the XXI century moral depreciation concept comprises not only deterioration of outside appearance of construction elements in the course of time but accelerated fashion changes in respect of interior design and rapid increase in technical level for residence buildings. For this reason if average rate of building dilapidation in the buildings of series 1–335, 1–335А and 1–464А constructed in Minsk within the period of 1957–1975 and being operated till 2005–2006 has constituted 25–29 % and their moral depreciation has been equal to more than 40 % then rate of the moral depreciation has significantly increased in the XXI century. Such situation requires execution of special investigations. High operating rates of refinancing have led to the necessity for record keeping of initial expenses and repairability levels because selection of building construction, repair or reconstruction variant depends on these parameters. Repairability classification of main elements of residence buildings and premises has been proposed for regulation of such selection procedure. In this case it is recommended to take into account technological effectiveness of repair and technical service, verifiability, accessibility, easy dismountability, substitutability and interchangeability of construction elements and technical devices. The paper presents nomograms that permit to make easier practical calculations on determination of cost-efficient time period for operation of the element prior to its substitution at various refinancing rates and also for comparison of relative initial expenses according to time service. 

Risks and challenges associated with the design and construction of a nuclear power plant

International Nuclear Information System (INIS)

Liebana Martinez, B.; Armas Garcia, A.; Martinez Gozalo, I.

2011-01-01

The construction of a nuclear power plant project, considering the period prior to the operation of the plant, requires a very strict risk control to ensure compliance with a series of challenges. The present paper identifying the most important challenges facing the construct ability and license requirements of the process, identifying the interfaces and proposing a methodology of construction to meet the challenge of a construction process in 5 years.

TRANSITING PLANETS WITH LSST. II. PERIOD DETECTION OF PLANETS ORBITING 1 M{sub ⊙} HOSTS

Energy Technology Data Exchange (ETDEWEB)

Jacklin, Savannah [Department of Astrophysics and Planetary Science, Villanova University, Villanova, PA 19085 (United States); Lund, Michael B.; Stassun, Keivan G. [Department of Physics and Astronomy, Vanderbilt University, Nashville, TN 37235 (United States); Pepper, Joshua [Department of Physics, Lehigh University, Bethlehem, PA 18015 (United States)

2015-07-15

The Large Synoptic Survey Telescope (LSST) will photometrically monitor ∼10{sup 9} stars for 10 years. The resulting light curves can be used to detect transiting exoplanets. In particular, as demonstrated by Lund et al., LSST will probe stellar populations currently undersampled in most exoplanet transit surveys, including out to extragalactic distances. In this paper we test the efficiency of the box-fitting least-squares (BLS) algorithm for accurately recovering the periods of transiting exoplanets using simulated LSST data. We model planets with a range of radii orbiting a solar-mass star at a distance of 7 kpc, with orbital periods ranging from 0.5 to 20 days. We find that standard-cadence LSST observations will be able to reliably recover the periods of Hot Jupiters with periods shorter than ∼3 days; however, it will remain a challenge to confidently distinguish these transiting planets from false positives. At the same time, we find that the LSST deep-drilling cadence is extremely powerful: the BLS algorithm successfully recovers at least 30% of sub-Saturn-size exoplanets with orbital periods as long as 20 days, and a simple BLS power criterion robustly distinguishes ∼98% of these from photometric (i.e., statistical) false positives.

Forecasting Canadian nuclear power station construction costs

International Nuclear Information System (INIS)

Keng, C.W.K.

1985-01-01

Because of the huge volume of capital required to construct a modern electric power generating station, investment decisions have to be made with as complete an understanding of the consequences of the decision as possible. This understanding must be provided by the evaluation of future situations. A key consideration in an evaluation is the financial component. This paper attempts to use an econometric method to forecast the construction costs escalation of a standard Canadian nuclear generating station (NGS). A brief review of the history of Canadian nuclear electric power is provided. The major components of the construction costs of a Canadian NGS are studied and summarized. A database is built and indexes are prepared. Based on these indexes, an econometric forecasting model is constructed using an apparently new econometric methodology of forecasting modelling. Forecasts for a period of 40 years are generated and applications (such as alternative scenario forecasts and range forecasts) to uncertainty assessment and/or decision-making are demonstrated. The indexes, the model, and the forecasts and their applications, to the best of the author's knowledge, are the first for Canadian NGS constructions. (author)

Accidents in Malaysian construction industry: statistical data and court cases.

Science.gov (United States)

Chong, Heap Yih; Low, Thuan Siang

2014-01-01

Safety and health issues remain critical to the construction industry due to its working environment and the complexity of working practises. This research attempts to adopt 2 research approaches using statistical data and court cases to address and identify the causes and behavior underlying construction safety and health issues in Malaysia. Factual data on the period of 2000-2009 were retrieved to identify the causes and agents that contributed to health issues. Moreover, court cases were tabulated and analyzed to identify legal patterns of parties involved in construction site accidents. Approaches of this research produced consistent results and highlighted a significant reduction in the rate of accidents per construction project in Malaysia.

Spindle assembly checkpoint protein expression correlates with cellular proliferation and shorter time to recurrence in ovarian cancer.

LENUS (Irish Health Repository)

McGrogan, Barbara

2014-07-01

Ovarian carcinoma (OC) is the most lethal of the gynecological malignancies, often presenting at an advanced stage. Treatment is hampered by high levels of drug resistance. The taxanes are microtubule stabilizing agents, used as first-line agents in the treatment of OC that exert their apoptotic effects through the spindle assembly checkpoint. BUB1-related protein kinase (BUBR1) and mitotic arrest deficient 2 (MAD2), essential spindle assembly checkpoint components, play a key role in response to taxanes. BUBR1, MAD2, and Ki-67 were assessed on an OC tissue microarray platform representing 72 OC tumors of varying histologic subtypes. Sixty-one of these patients received paclitaxel and platinum agents combined; 11 received platinum alone. Overall survival was available for all 72 patients, whereas recurrence-free survival (RFS) was available for 66 patients. Increased BUBR1 expression was seen in serous carcinomas, compared with other histologies (P = .03). Increased BUBR1 was significantly associated with tumors of advanced stage (P = .05). Increased MAD2 and BUBR1 expression also correlated with increased cellular proliferation (P < .0002 and P = .02, respectively). Reduced MAD2 nuclear intensity was associated with a shorter RFS (P = .03), in ovarian tumors of differing histologic subtype (n = 66). In this subgroup, for those women who received paclitaxel and platinum agents combined (n = 57), reduced MAD2 intensity also identified women with a shorter RFS (P < .007). For the entire cohort of patients, irrespective of histologic subtype or treatment, MAD2 nuclear intensity retained independent significance in a multivariate model, with tumors showing reduced nuclear MAD2 intensity identifying patients with a poorer RFS (P = .05).

The association between post-traumatic stress disorder and shorter telomere length: A systematic review and meta-analysis.

Science.gov (United States)

Li, Xuemei; Wang, Jiang; Zhou, Jianghua; Huang, Pan; Li, Jiping

2017-08-15

Post-traumatic stress disorder (PTSD) is a common psychiatric disorder, which may accelerate aging. Many study have investigated the association between telomeres length and PTSD, but results from published studies are contradictory. Therefore, Meta-analysis approaches were conducted to give more precise estimate of relationship between telomere length and PTSD. We systematically reviewed the databases of PUBMED, PsycINFO, Medline(Ovid SP) and EMBASE for all articles on the association between telomere length and PTSD. Data were summarized by using random-effects in the meta-analysis. The heterogeneity among studies were examined by using Cochrane's Q statistic and I-squared. Five eligible studies containing 3851 participants were included in our meta-analysis. Shorten telomere length was significantly associated with PTSD with mean difference of -0.19( 95% CI: -0.27, -0.01; P<0.001) with I-square of 96%. The results from subgroup analysis demonstrated that shorter telomere length was significantly associated with PTSD across all gender groups, with mean difference of -0.15( 95% CI: -0.29, -0.01; P=0.04) for female, mean difference of -0.17( 95% CI: -0.19, -0.15; P<0.001) for male. Meanwhile, shorten telomere length was significantly associated with sexual assault(mean difference =-0.15, 95% CI: -0.29, -0.01), childhood trauma (mean difference =-0.08, 95% CI: -0.19, -0.07), but not combat (mean difference =-0.39, 95% CI: -0.83, 0.05). Compared to the individuals without PTSD, individuals with PTSD have shorter telomere length, which has implications for early intervention and timely treatment to prevent future adverse health outcomes. Copyright © 2017. Published by Elsevier B.V.

Drought over Seoul and Its Association with Solar Cycles

Directory of Open Access Journals (Sweden)

Jong-Hyeok Park

2013-12-01

Full Text Available We have investigated drought periodicities occurred in Seoul to find out any indication of relationship between drought in Korea and solar activities. It is motivated, in view of solar-terrestrial connection, to search for an example of extreme weather condition controlled by solar activity. The periodicity of drought in Seoul has been re-examined using the wavelet transform technique as the consensus is not achieved yet. The reason we have chosen Seoul is because daily precipitation was recorded for longer than 200 years, which meets our requirement that analyses of drought frequency demand long-term historical data to ensure reliable estimates. We have examined three types of time series of the Effective Drought Index (EDI. We have directly analyzed EDI time series in the first place. And we have constructed and analyzed time series of histogram in which the number of days whose EDI is less than -1.5 for a given month of the year is given as a function of time, and one in which the number of occasions where EDI values of three consecutive days are all less than -1.5 is given as a function of time. All the time series data sets we analyzed are periodic. Apart from the annual cycle due to seasonal variations, periodicities shorter than the 11 year sunspot cycle, ~ 3, ~ 4, ~ 6 years, have been confirmed. Periodicities to which theses short periodicities (shorter than Hale period may be corresponding are not yet known. Longer periodicities possibly related to Gleissberg cycles, ~ 55, ~ 120 years, can be also seen. However, periodicity comparable to the 11 year solar cycle seems absent in both EDI and the constructed data sets.

Causal Relationship between Construction Production and GDP in Turkey

Directory of Open Access Journals (Sweden)

Hakkı Kutay Bolkol

2015-12-01

Full Text Available This study empirically investigates the causal relationship between construction production and GDP for Turkey during 2005Q1-2013Q4 period. Because it is found that, there is no cointegration which means there is no long run relationship between variables, VAR Granger Causality Method is used to test the causality in short run. The findings reveal that, the causality runs from GDP to Building Production and Building Production to Non-Building Production (i.e. bidirectional relationship. Findings of this paper suggest that, because there is no long run relationship between Construction Production (Building and Non-Building and GDP and also in short run the causality runs from GDP to Construction Production, the growth strategy based on mainly Construction Sector growth is not a good idea for Turkey.

Causal Relationship between Construction Production and GDP in Turkey

Directory of Open Access Journals (Sweden)

Hakkı Kutay Bolkol

2015-09-01

Full Text Available This study empirically investigates the causal relationship between construction production and GDP for Turkey during 2005Q1-2013Q4 period. Because it is found that, there is no cointegration which means there is no long run relationship between variables, VAR Granger Causality Method is used to test the causality in short run. The findings reveal that, the causality runs from GDP to Building Production and Building Production to Non-Building Production (i.e. bidirectional relationship. Findings of this paper suggest that, because there is no long run relationship between Construction Production (Building and Non-Building and GDP and also in short run the causality runs from GDP to Construction Production, the growth strategy based on mainly Construction Sector growth is not a good idea for Turkey.

Management of the interfaces between construction and startup

International Nuclear Information System (INIS)

Anderson, W.R.; Beatty, D.C.

1976-01-01

Many papers have been presented, and many articles published on the various tasks of Nuclear Plant Design, Construction, Startup and Operations. Most of the presentations have been concerned with the complexities of the particular task being discussed. This is as it should be, since these areas are quite broad in themselves and deserve the full attention of the technology. Recently more attention is being directed to the interfaces between the classical portions of nuclear projects. The paper attempts to address just one of these areas: the interfaces between construction and startup. These interfaces have normally been addressed to the extent that engineering schedules, construction schedules, equipment deliveries and startup test schedules have been dovetailed graphically, or computerized, and periodically updated to reflect significant changes

Simulation-Based Prediction of Equivalent Continuous Noises during Construction Processes.

Science.gov (United States)

Zhang, Hong; Pei, Yun

2016-08-12

Quantitative prediction of construction noise is crucial to evaluate construction plans to help make decisions to address noise levels. Considering limitations of existing methods for measuring or predicting the construction noise and particularly the equivalent continuous noise level over a period of time, this paper presents a discrete-event simulation method for predicting the construction noise in terms of equivalent continuous level. The noise-calculating models regarding synchronization, propagation and equivalent continuous level are presented. The simulation framework for modeling the noise-affected factors and calculating the equivalent continuous noise by incorporating the noise-calculating models into simulation strategy is proposed. An application study is presented to demonstrate and justify the proposed simulation method in predicting the equivalent continuous noise during construction. The study contributes to provision of a simulation methodology to quantitatively predict the equivalent continuous noise of construction by considering the relevant uncertainties, dynamics and interactions.

42 CFR 137.353 - What is contained in a construction project financial report?

Science.gov (United States)

2010-10-01

... financial report? 137.353 Section 137.353 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND... § 137.353 What is contained in a construction project financial report? Construction project financial reports contain information regarding the amount of funds expended during the reporting period, and...

ANAEROBIC COMPOST CONSTRUCTED WETLANDS SYSTEM TECHNOLOGY - SITE ITER

Science.gov (United States)

In Fall 1994, anaerobic compost wetlands in both upflow and downflow configurations were constructed adjacent to and received drainage from the Burleigh Tunnel, which forms part of the Clear Creek/Central City Superfund site. The systems were operated over a 3 year period. The e...

Second-order two-scale method for bending behaviors of composite plate with periodic configuration

International Nuclear Information System (INIS)

Zhu Guoqing; Cui Junzhi

2010-01-01

In this paper, the second-order two-scale analysis method for bending behaviors of the plate made from composites with 3-D periodic configuration is presented by means of construction way. It can capture the microscopic 3-D mechanics behaviors caused from 3-D micro-structures. First, directly starting from the 3-D elastic plate model of composite materials with 3-D periodic configuration, three cell models are defined, and correspondingly the three classes of cell functions only defined on 3 normalized cells are constructed. And then, the effective homogenization parameters of composites are calculated from those local functions, it leads to a 2-D homogenized laminar plate problem. Next, to solve it the homogenization solution is obtained. Finally, the second-order two-scale solution is constructed from the micro-cell functions and the homogenization solution.

Quantum periods of Calabi–Yau fourfolds

Energy Technology Data Exchange (ETDEWEB)

Gerhardus, Andreas, E-mail: gerhardus@th.physik.uni-bonn.de; Jockers, Hans, E-mail: jockers@uni-bonn.de

2016-12-15

In this work we study the quantum periods together with their Picard–Fuchs differential equations of Calabi–Yau fourfolds. In contrast to Calabi–Yau threefolds, we argue that the large volume points of Calabi–Yau fourfolds generically are regular singular points of the Picard–Fuchs operators of non-maximally unipotent monodromy. We demonstrate this property in explicit examples of Calabi–Yau fourfolds with a single Kähler modulus. For these examples we construct integral quantum periods and study their global properties in the quantum Kähler moduli space with the help of numerical analytic continuation techniques. Furthermore, we determine their genus zero Gromov–Witten invariants, their Klemm–Pandharipande meeting invariants, and their genus one BPS invariants. In our computations we emphasize the features attributed to the non-maximally unipotent monodromy property. For instance, it implies the existence of integral quantum periods that at large volume are purely worldsheet instanton generated. To verify our results, we also present intersection theory techniques to enumerate lines with a marked point on complete intersection Calabi–Yau fourfolds in Grassmannian varieties.

Multiple periodic-soliton solutions of the (3+1)-dimensional generalised shallow water equation

Science.gov (United States)

Li, Ye-Zhou; Liu, Jian-Guo

2018-06-01

Based on the extended variable-coefficient homogeneous balance method and two new ansätz functions, we construct auto-Bäcklund transformation and multiple periodic-soliton solutions of (3 {+} 1)-dimensional generalised shallow water equations. Completely new periodic-soliton solutions including periodic cross-kink wave, periodic two-solitary wave and breather type of two-solitary wave are obtained. In addition, cross-kink three-soliton and cross-kink four-soliton solutions are derived. Furthermore, propagation characteristics and interactions of the obtained solutions are discussed and illustrated in figures.

Hazard Models From Periodic Dike Intrusions at Kı¯lauea Volcano, Hawai`i

Science.gov (United States)

Montgomery-Brown, E. K.; Miklius, A.

2016-12-01

The persistence and regular recurrence intervals of dike intrusions in the East Rift Zone (ERZ) of Kı¯lauea Volcano lead to the possibility of constructing a time-dependent intrusion hazard model. Dike intrusions are commonly observed in Kı¯lauea Volcano's ERZ and can occur repeatedly in regions that correlate with seismic segments (sections of rift seismicity with persistent definitive lateral boundaries) proposed by Wright and Klein (USGS PP1806, 2014). Five such ERZ intrusions have occurred since 1983 with inferred locations downrift of the bend in Kı¯lauea's ERZ, with the first (1983) being the start of the ongoing ERZ eruption. The ERZ intrusions occur on one of two segments that are spatially coincident with seismic segments: Makaopuhi (1993 and 2007) and Nāpau (1983, 1997, and 2011). During each intrusion, the amount of inferred dike opening was between 2 and 3 meters. The times between ERZ intrusions for same-segment pairs are all close to 14 years: 14.07 (1983-1997), 14.09 (1997-2011), and 13.95 (1993-2007) years, with the Nāpau segment becoming active about 3.5 years after the Makaopuhi segment in each case. Four additional upper ERZ intrusions are also considered here. Dikes in the upper ERZ have much smaller opening ( 10 cm), and have shorter recurrence intervals of 8 years with more variability. The amount of modeled dike opening during each of these events roughly corresponds to the amount of seaward south flank motion and deep rift opening accumulated in the time between events. Additionally, the recurrence interval of 14 years appears to be unaffected by the magma surge of 2003-2007, suggesting that flank motion, rather than magma supply, could be a controlling factor in the timing and periodicity of intrusions. Flank control over the timing of magma intrusions runs counter to the historical research suggesting that dike intrusions at Kı¯lauea are driven by magma overpressure. This relatively free sliding may have resulted from decreased

Periodicity and positivity of a class of fractional differential equations.

Science.gov (United States)

Ibrahim, Rabha W; Ahmad, M Z; Mohammed, M Jasim

2016-01-01

Fractional differential equations have been discussed in this study. We utilize the Riemann-Liouville fractional calculus to implement it within the generalization of the well known class of differential equations. The Rayleigh differential equation has been generalized of fractional second order. The existence of periodic and positive outcome is established in a new method. The solution is described in a fractional periodic Sobolev space. Positivity of outcomes is considered under certain requirements. We develop and extend some recent works. An example is constructed.

Analysis of Construction Accidents in Turkey and Responsible Parties

OpenAIRE

GÜRCANLI, G. Emre; MÜNGEN, Uğur

2013-01-01

Construction is one of the world’s biggest industry that includes jobs as diverse as building, civil engineering, demolition, renovation, repair and maintenance. Construction workers are exposed to a wide variety of hazards. This study analyzes 1,117 expert witness reports which were submitted to criminal and labour courts. These reports are from all regions of the country and cover the period 1972–2008. Accidents were classified by the consequence of the incident, time and main causes of the...

Design and construction of nuclear power plants

International Nuclear Information System (INIS)

Meiswinkel, Ruediger; Meyer, Julian; Schnell, Juergen

2013-01-01

Despite all the efforts being put into expanding renewable energy sources, large-scale power stations will be essential as part of a reliable energy supply strategy for a longer period. Given that they are low on CO2 emissions, many countries are moving into or expanding nuclear energy to cover their baseload supply. Building structures required for nuclear installations whose protective function means they are classified as safety-related, have to meet particular construction requirements more stringent than those involved in conventional construction. This book gives a comprehensive overview from approval aspects given by nuclear and construction law, with special attention to the interface between plant and construction engineering, to a building structure classification. All life cycle phases are considered, with the primary focus on execution. Accidental actions on structures, the safety concept and design and fastening systems are exposed to a particular treatment. Selected chapters of the German concrete yearbook ''Beton-Kalender'' are now available in English. The new English BetonKalender Series delivers internationally useful engineering expertise and industrial know-how from Germany.

Construction management of Indian pressurized heavy water reactors

International Nuclear Information System (INIS)

Bohra, S.A.; Sharma, P.D.

2006-01-01

efforts are focused on further reduction of gestation period. This is in contrast to construction period of 7-14 years in the earlier projects with labour intensive construction methods, learning period and indigenisation. The schedule and cost are interrelated and ultimately determine the viability and competitive edge of a project. With rich experience of over 30 years of operation and construction management it is well established that setting up of nuclear power projects in India in 4-5 years is quite feasible because of tremendous developments in construction technology; mechanization, parallel civil works and equipment erection, computerized project monitoring and accounting systems. By considering the best achieved times for the critical path activities of previous and ongoing projects, even a 4-year schedule is achievable. For nuclear power to be competitive it is essential that the gestation period is reduced and the capacity utilization enhanced. Both of these are the goals of the Indian nuclear power program. Presently the overnight cost per kW installed capacity is in the range of US$ 1100-1300 with levellised tariff of 5 c/kWh

Public private partnership construction project disputes in Nigeria ...

African Journals Online (AJOL)

This research examines the possibility of operating a smooth Public Private Partnership (PPP) project for the entire concession period following financial closure, without recourse to litigation or arbitration for settlement of disputes by studying the causes and effects of disputes in construction projects procured in Nigeria ...

Collective Construction of Knowledge in Clinical Biochemistry

Directory of Open Access Journals (Sweden)

S.B. Barreto

2010-05-01

Full Text Available The collective construction of knowledge occurs by the convergence of ideas and semantic. This paper was made for a graduation discipline, in 2009-2, with 240students who were separated into 4 groups: morning period (M1,M2 and night period (N1,N2. This study aims the collective construction of a abstract-manual of clinical biochemistry tests, due the difficulty in comprehension of certain concepts by the students; it intends to help them in the process of knowledge acquirement. The constructivist approach was adopted and the matters of the discipline were available in a “Student Group e-mail account”, a functional communication tool. The instructions were reachable on the web. M1,M2 and N1 made one part of the study at the first period. N2 did not conclude the study at the same time period of the other groups; therefore they received a new responsibility: they were supposed to conclude and correct the manual and its application which included 90 different kinds of labor exams. A textbook has been defined containing illustrative pictures of blood collection and biosecurity. Three banners were exposed inside the hall of the institution. Collective work is important for the effective arrangement in health area. In the process of teaching/learning, the teacher must proceed on practices and methodologies aiming the development of the student competences and skills which represent its professional identity.

North–South Asymmetry in Rieger-type Periodicity during Solar Cycles 19–23

International Nuclear Information System (INIS)

Gurgenashvili, Eka; Zaqarashvili, Teimuraz V.; Kukhianidze, Vasil; Oliver, Ramon; Ballester, Jose Luis; Dikpati, Mausumi; McIntosh, Scott W.

2017-01-01

Rieger-type periodicity has been detected in different activity indices over many solar cycles. It was recently shown that the periodicity correlates with solar activity having a shorter period during stronger cycles. Solar activity level is generally asymmetric between northern and southern hemispheres, which could suggest the presence of a similar behavior in the Rieger-type periodicity. We analyze the sunspot area/number and the total magnetic flux data for northern and southern hemispheres during solar cycles 19–23, which had remarkable north–south asymmetry. Using wavelet analysis of sunspot area and number during the north-dominated cycles (19–20), we obtained the periodicity of 160–165 days in the stronger northern hemisphere and 180–190 days in the weaker southern hemisphere. On the other hand, south-dominated cycles (21–23) display the periodicity of 155–160 days in the stronger southern hemisphere and 175–188 days in the weaker northern hemisphere. Therefore, the Rieger-type periodicity has the north–south asymmetry in sunspot area/number data during solar cycles with strong hemispheric asymmetry. We suggest that the periodicity is caused by magnetic Rossby waves in the internal dynamo layer. Using the dispersion relation of magnetic Rossby waves and observed Rieger periodicity, we estimated the magnetic field strength in the layer as 45–49 kG in more active hemispheres (north during cycles 19–20 and south during cycles 21–23) and 33–40 kG in weaker hemispheres. The estimated difference in the hemispheric field strength is around 10 kG, which provides a challenge for dynamo models. Total magnetic flux data during cycles 20–23 reveals no clear north–south asymmetry, which needs to be explained in the future.

North–South Asymmetry in Rieger-type Periodicity during Solar Cycles 19–23

Energy Technology Data Exchange (ETDEWEB)

Gurgenashvili, Eka; Zaqarashvili, Teimuraz V.; Kukhianidze, Vasil [Abastumani Astrophysical Observatory at Ilia State University, Tbilisi, Georgia (United States); Oliver, Ramon; Ballester, Jose Luis [Departament de Física, Universitat de les Illes Balears, E-07122, Palma de Mallorca (Spain); Dikpati, Mausumi; McIntosh, Scott W., E-mail: Eka.gurgenashvili.1@iliauni.edu.ge [High Altitude Observatory, National Center for Atmospheric Research, P.O. Box 3000, Boulder, CO 80307 (United States)

2017-08-20

Rieger-type periodicity has been detected in different activity indices over many solar cycles. It was recently shown that the periodicity correlates with solar activity having a shorter period during stronger cycles. Solar activity level is generally asymmetric between northern and southern hemispheres, which could suggest the presence of a similar behavior in the Rieger-type periodicity. We analyze the sunspot area/number and the total magnetic flux data for northern and southern hemispheres during solar cycles 19–23, which had remarkable north–south asymmetry. Using wavelet analysis of sunspot area and number during the north-dominated cycles (19–20), we obtained the periodicity of 160–165 days in the stronger northern hemisphere and 180–190 days in the weaker southern hemisphere. On the other hand, south-dominated cycles (21–23) display the periodicity of 155–160 days in the stronger southern hemisphere and 175–188 days in the weaker northern hemisphere. Therefore, the Rieger-type periodicity has the north–south asymmetry in sunspot area/number data during solar cycles with strong hemispheric asymmetry. We suggest that the periodicity is caused by magnetic Rossby waves in the internal dynamo layer. Using the dispersion relation of magnetic Rossby waves and observed Rieger periodicity, we estimated the magnetic field strength in the layer as 45–49 kG in more active hemispheres (north during cycles 19–20 and south during cycles 21–23) and 33–40 kG in weaker hemispheres. The estimated difference in the hemispheric field strength is around 10 kG, which provides a challenge for dynamo models. Total magnetic flux data during cycles 20–23 reveals no clear north–south asymmetry, which needs to be explained in the future.

Multi-period project portfolio selection under risk considerations and stochastic income

Science.gov (United States)

Tofighian, Ali Asghar; Moezzi, Hamid; Khakzar Barfuei, Morteza; Shafiee, Mahmood

2018-02-01

This paper deals with multi-period project portfolio selection problem. In this problem, the available budget is invested on the best portfolio of projects in each period such that the net profit is maximized. We also consider more realistic assumptions to cover wider range of applications than those reported in previous studies. A novel mathematical model is presented to solve the problem, considering risks, stochastic incomes, and possibility of investing extra budget in each time period. Due to the complexity of the problem, an effective meta-heuristic method hybridized with a local search procedure is presented to solve the problem. The algorithm is based on genetic algorithm (GA), which is a prominent method to solve this type of problems. The GA is enhanced by a new solution representation and well selected operators. It also is hybridized with a local search mechanism to gain better solution in shorter time. The performance of the proposed algorithm is then compared with well-known algorithms, like basic genetic algorithm (GA), particle swarm optimization (PSO), and electromagnetism-like algorithm (EM-like) by means of some prominent indicators. The computation results show the superiority of the proposed algorithm in terms of accuracy, robustness and computation time. At last, the proposed algorithm is wisely combined with PSO to improve the computing time considerably.

Construction of quality-assured infant feeding process of care data repositories: Construction of the perinatal repository (Part 2).

Science.gov (United States)

García-de-León-Chocano, Ricardo; Muñoz-Soler, Verónica; Sáez, Carlos; García-de-León-González, Ricardo; García-Gómez, Juan M

2016-04-01

This is the second in a series of two papers regarding the construction of data quality (DQ) assured repositories, based on population data from Electronic Health Records (EHR), for the reuse of information on infant feeding from birth until the age of two. This second paper describes the application of the computational process of constructing the first quality-assured repository for the reuse of information on infant feeding in the perinatal period, with the aim of studying relevant questions from the Baby Friendly Hospital Initiative (BFHI) and monitoring its deployment in our hospital. The construction of the repository was carried out using 13 semi-automated procedures to assess, recover or discard clinical data. The initial information consisted of perinatal forms from EHR related to 2048 births (Facts of Study, FoS) between 2009 and 2011, with a total of 433,308 observations of 223 variables. DQ was measured before and after the procedures using metrics related to eight quality dimensions: predictive value, correctness, duplication, consistency, completeness, contextualization, temporal-stability, and spatial-stability. Once the predictive variables were selected and DQ was assured, the final repository consisted of 1925 births, 107,529 observations and 73 quality-assured variables. The amount of discarded observations mainly corresponds to observations of non-predictive variables (52.90%) and the impact of the de-duplication process (20.58%) with respect to the total input data. Seven out of thirteen procedures achieved 100% of valid births, observations and variables. Moreover, 89% of births and ~98% of observations were consistent according to the experts׳ criteria. A multidisciplinary approach along with the quantification of DQ has allowed us to construct the first repository about infant feeding in the perinatal period based on EHR population data. Copyright © 2016 Elsevier Ltd. All rights reserved.

Periodically distributed objects with quasicrystalline diffraction pattern

Energy Technology Data Exchange (ETDEWEB)

Wolny, Janusz, E-mail: wolny@fis.agh.edu.pl; Strzalka, Radoslaw [Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow (Poland); Kuczera, Pawel [Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow (Poland); Laboratory of Crystallography, ETH Zurich, Wolfgang-Pauli-Strasse 10, CH-8093 Zurich (Switzerland)

2015-03-30

It is possible to construct fully periodically distributed objects with a diffraction pattern identical to the one obtained for quasicrystals. These objects are probability distributions of distances obtained in the statistical approach to aperiodic structures distributed periodically. The diffraction patterns have been derived by using a two-mode Fourier transform—a very powerful method not used in classical crystallography. It is shown that if scaling is present in the structure, this two-mode Fourier transform can be reduced to a regular Fourier transform with appropriately rescaled scattering vectors and added phases. Detailed case studies for model sets 1D Fibonacci chain and 2D Penrose tiling are discussed. Finally, it is shown that crystalline, quasicrystalline, and approximant structures can be treated in the same way.

Theory of many-body localization in periodically driven systems

International Nuclear Information System (INIS)

Abanin, Dmitry A.; De Roeck, Wojciech; Huveneers, François

2016-01-01

We present a theory of periodically driven, many-body localized (MBL) systems. We argue that MBL persists under periodic driving at high enough driving frequency: The Floquet operator (evolution operator over one driving period) can be represented as an exponential of an effective time-independent Hamiltonian, which is a sum of quasi-local terms and is itself fully MBL. We derive this result by constructing a sequence of canonical transformations to remove the time-dependence from the original Hamiltonian. When the driving evolves smoothly in time, the theory can be sharpened by estimating the probability of adiabatic Landau–Zener transitions at many-body level crossings. In all cases, we argue that there is delocalization at sufficiently low frequency. We propose a phase diagram of driven MBL systems.

Fatal accidents in nighttime vs. daytime highway construction work zones.

Science.gov (United States)

Arditi, David; Lee, Dong-Eun; Polat, Gul

2007-01-01

Awareness about worker safety in nighttime construction has been a major concern because it is believed that nighttime construction creates hazardous work conditions. However, only a few studies provide valuable comparative information about accident characteristics of nighttime and daytime highway construction activities. This study investigates fatal accidents that occurred in Illinois highway work zones in the period 1996-2001 in order to determine the safety differences between nighttime and daytime highway construction. The lighting and weather conditions were included into the study as control parameters to see their effects on the frequency of fatal accidents occurring in work zones. According to this study, there is evidence that nighttime construction is more hazardous than daytime construction. The inclusion of a weather parameter into the analysis has limited effect on this finding. The study justifies establishing an efficient work zone accident reporting system and taking all necessary measures to enhance safety in nighttime work zones.

Nail gun injuries among construction workers.

Science.gov (United States)

Dement, John M; Lipscomb, Hester; Li, Leiming; Epling, Carol; Desai, Tejas

2003-05-01

Pneumatic nail guns greatly increase worker productivity and are extensively used in wood frame building construction, with especially high use in residential construction. One surveillance report of nail gun injuries in Washington State has been published; however, other literature consists largely of case reports and case series in trauma journals. The major objective of the current study was to investigate the occurrence of nail gun-associated injuries among construction workers and to identify preventable work-related factors associated with these injuries. Nail gun-related injuries occurring among a cohort of 13,347 carpenters in Ohio who worked union hours during the time period January 1, 1994, until September 30, 1997, were identified by matching the cohort with workers' compensation claims made to the Ohio Bureau of Workers' Compensation. We also analyzed workers' compensation claims for North Carolina Home Builders Association members for the period July 1996-November 1999 to identify nail gun-related injuries. Analyses included stratified analyses of claims by nature and body part injured, calculation of nail gun injury rates, and analyses of free text descriptions of injuries. Overall, nail gun injuries were responsible for 3.9 percent of workers' compensation claims with 8.3 percent to 25.5 percent of claims involving paid lost work time. The overall rate of nail gun injuries (cases per 200,000 work hours) was 0.33 in North Carolina and 0.26 in Ohio, reflecting the greater concentration of wood frame construction workers in the North Carolina population studied. Higher rates of injury were observed for carpenters in North Carolina and among residential carpenters in Ohio. The predominant body part injured was the hands/fingers, with 80 to 89 percent of injuries being nail punctures. Analyses of free text information for puncture injuries found approximately 70 percent of injuries to occur during the framing/sheathing stage of construction. Our data

Mimicking Nonequilibrium Steady States with Time-Periodic Driving

Science.gov (United States)

2016-08-29

construction does not require the solution of any differential equations , only linear algebraic equations . By contrast, a mapping in the opposite...set of algebraic linear equations . The mapping between NESS and SP presented above was not intended as a set of operational instructions for... differential equations with time-periodic parameters. Typically, this can only be done numerically. In some applications, transition rates are constrained by

Shorter preschool, leukocyte telomere length is associated with obesity at age 9 in Latino children

DEFF Research Database (Denmark)

Kjaer, Thora Wesenberg; Faurholt-Jepsen, D; Mehta, K M

2018-01-01

The aim of this study was to determine the potential role of leukocyte telomere length as a biomarker for development of childhood obesity in a low-income Latino population. A birth cohort of Latino children (N = 201) in San Francisco (recruited May 2006-May 2007) was followed until age 9...... and assessed annually for obesity and dietary intake. Leukocyte telomere length was measured at 4 and 5 years (n = 102) and assessed as a predictor for obesity at age 9, adjusting for known risk factors. Furthermore, leukocyte telomere length at age 4 and 5 was evaluated as a possible mediator...... of the relationship between excessive sugar-sweetened beverage consumption and obesity at age 9. Shorter leukocyte telomere length in preschoolers was associated with obesity at age 9 (adjusted odds ratio 0.35, 95% confidence interval 0.13-0.94) after adjustment for known risk factors. Telomere length mediated 11...

K-theory and periodic cyclic homology of some noncompact quantum algebras

International Nuclear Information System (INIS)

Do Ngoc Diep; Kuku, Aderemi O.

2003-07-01

We prove in this paper that the periodic cyclic homology of the quantized algebras of functions on coadjoint orbits of connected and simply connected Lie group, are isomorphic to the periodic cyclic homology of the quantized algebras of functions on coadjoint orbits of compact maximal subgroups, without localization. Some noncompact quantum groups and algebras were constructed and their irreducible representations were classified in recent works of Do Ngoc Diep and Nguyen Viet Hai [DH1]-[DH2] and Do Due Hanh [DD] by using deformation quantization. In this paper we compute their K-groups, periodic cyclic homology groups and their Chern characters. (author)

Leaching behaviour of copper slag, construction and demolition waste and crushed rock used in a full-scale road construction.

Science.gov (United States)

Lidelöw, Sofia; Mácsik, Josef; Carabante, Ivan; Kumpiene, Jurate

2017-12-15

The leaching behaviour of a road construction with fayalitic copper slag, recycled concrete and crushed rock as sub-base materials was monitored over ten years. All studied materials used in the road construction, including crushed rock, contained concentrations of several elements exceeding the guideline values recommended by the Swedish EPA for total element concentrations for waste materials used in constructions. Despite that, leaching from the road construction under field conditions in general was relatively low. The leachates from the recycled materials contained higher concentrations of several constituents than the leachates from the reference section with crushed rock. The leaching of the elements of interest (Cr, Mo, Ni, Zn) reached peak concentrations during the second and fourth (Cu) years and decreased over the observation period to levels below the Swedish recommended values. Carbonation of the concrete aggregates caused a substantial but short-term increase in the leaching of oxyanions such as chromate. The environmental risks related to element leaching are highest at the beginning of the road life. Ageing of materials or pre-treatment through leaching is needed prior to their use in construction to avoid peak concentrations. Also, the design of road constructions should be adjusted so that recycled materials are covered with low-permeability covers, which would minimize the exposure to atmospheric precipitation and weathering. Copyright © 2017 Elsevier Ltd. All rights reserved.

Research methods of the parameters of residential buildings construction

Directory of Open Access Journals (Sweden)

Grigor’ev Vladimir Aleksandrovich

Full Text Available The analysis of construction theory and practice shows that rational organizational and technological parameters of the construction of residential buildings should be based on the manifestation in time and space of the most important stages construction with their harmonization. Basing on the experience of normalizing the construction duration, it is advisable to express the complex of residential buildings’ construction processes by their basic stages - preparatory period, underground part, aboveground part, external engineering networks and land improvement. The main indicators of the development and implementation of optimization solutions are: the total duration of the construction, the duration of the preparation period, the duration of the construction of the underground part, the duration of the construction of the aboveground part, the duration of external engineering networks laying, the duration of land improvement. The indicators of the total duration of the construction of residential buildings, the construction the underground and aboveground parts are determined on the basis of the operation of one assembly crane on an object of up to four sections. In case of more sections two (three cranes are considered and the total construction duration is set depending on these conditions. The duration of the construction of multisectional buildings is determined basing on the simultaneous construction of the stages or their combination with a certain time shift. However, this approach requires a significant amount of optimization solutions due to its multivariance. Therefore, in order to reduce the volume of calculations in some cases, for example, when planning the development of districts and neighborhoods, statistical methods can be used for determining the duration of the construction basing on the compilation of optimization solutions. The total duration of the construction and the duration of the main stages are multiple

Surface Modified Long Period Fiber Grating Sensor for Rapid Detection of Aspergillus Niger Fungal Spores

Science.gov (United States)

Gambhir, Monika; Gupta, Shilpi; John, Priya; Mahakud, Ramakanta; Kumar, Jitendra; Prakash, Om

2018-03-01

We present development of a compact and label-free sensor based on the surface modification of copper vapor laser fabricated long period fiber gratings for detection of airborne Aspergillus niger (A. niger) fungal spores. Surface of sensors were functionalized with monoclonal glucose oxidases IgG1 for target-specific covalent binding. In process of functionalization and binding of 103 cfu/ml of pathogenic A. niger fungal spores, notable shorter wave transition in resonance wavelength from 1562.93 nm to 1555.97 nm, and significant reduction in peak loss from 61.72 dB to 57.48 dB were recorded. The implementation was cost effective and yielded instantaneous results.

Periodic local MP2 method employing orbital specific virtuals

International Nuclear Information System (INIS)

Usvyat, Denis; Schütz, Martin; Maschio, Lorenzo

2015-01-01

We introduce orbital specific virtuals (OSVs) to represent the truncated pair-specific virtual space in periodic local Møller-Plesset perturbation theory of second order (LMP2). The OSVs are constructed by diagonalization of the LMP2 amplitude matrices which correspond to diagonal Wannier-function (WF) pairs. Only a subset of these OSVs is adopted for the subsequent OSV-LMP2 calculation, namely, those with largest contribution to the diagonal pair correlation energy and with the accumulated value of these contributions reaching a certain accuracy. The virtual space for a general (non diagonal) pair is spanned by the union of the two OSV sets related to the individual WFs of the pair. In the periodic LMP2 method, the diagonal LMP2 amplitude matrices needed for the construction of the OSVs are calculated in the basis of projected atomic orbitals (PAOs), employing very large PAO domains. It turns out that the OSVs are excellent to describe short range correlation, yet less appropriate for long range van der Waals correlation. In order to compensate for this bias towards short range correlation, we augment the virtual space spanned by the OSVs by the most diffuse PAOs of the corresponding minimal PAO domain. The Fock and overlap matrices in OSV basis are constructed in the reciprocal space. The 4-index electron repulsion integrals are calculated by local density fitting and, for distant pairs, via multipole approximation. New procedures for determining the fit-domains and the distant-pair lists, leading to higher efficiency in the 4-index integral evaluation, have been implemented. Generally, and in contrast to our previous PAO based periodic LMP2 method, the OSV-LMP2 method does not require anymore great care in the specification of the individual domains (to get a balanced description when calculating energy differences) and is in that sense a black box procedure. Discontinuities in potential energy surfaces, which may occur for PAO-based calculations if one is not

Periodic local MP2 method employing orbital specific virtuals

Energy Technology Data Exchange (ETDEWEB)

Usvyat, Denis, E-mail: denis.usvyat@chemie.uni-regensburg.de; Schütz, Martin, E-mail: martin.schuetz@chemie.uni-regensburg.de [Institute for Physical and Theoretical Chemistry, Universität Regensburg, Universitätsstraße 31, D-93040 Regensburg (Germany); Maschio, Lorenzo, E-mail: lorenzo.maschio@unito.it [Dipartimento di Chimica, and Centre of Excellence NIS (Nanostructured Interfaces and Surfaces), Università di Torino, via Giuria 5, I-10125 Torino (Italy)

2015-09-14

We introduce orbital specific virtuals (OSVs) to represent the truncated pair-specific virtual space in periodic local Møller-Plesset perturbation theory of second order (LMP2). The OSVs are constructed by diagonalization of the LMP2 amplitude matrices which correspond to diagonal Wannier-function (WF) pairs. Only a subset of these OSVs is adopted for the subsequent OSV-LMP2 calculation, namely, those with largest contribution to the diagonal pair correlation energy and with the accumulated value of these contributions reaching a certain accuracy. The virtual space for a general (non diagonal) pair is spanned by the union of the two OSV sets related to the individual WFs of the pair. In the periodic LMP2 method, the diagonal LMP2 amplitude matrices needed for the construction of the OSVs are calculated in the basis of projected atomic orbitals (PAOs), employing very large PAO domains. It turns out that the OSVs are excellent to describe short range correlation, yet less appropriate for long range van der Waals correlation. In order to compensate for this bias towards short range correlation, we augment the virtual space spanned by the OSVs by the most diffuse PAOs of the corresponding minimal PAO domain. The Fock and overlap matrices in OSV basis are constructed in the reciprocal space. The 4-index electron repulsion integrals are calculated by local density fitting and, for distant pairs, via multipole approximation. New procedures for determining the fit-domains and the distant-pair lists, leading to higher efficiency in the 4-index integral evaluation, have been implemented. Generally, and in contrast to our previous PAO based periodic LMP2 method, the OSV-LMP2 method does not require anymore great care in the specification of the individual domains (to get a balanced description when calculating energy differences) and is in that sense a black box procedure. Discontinuities in potential energy surfaces, which may occur for PAO-based calculations if one is not

A delay time model for a mission-based system subject to periodic and random inspection and postponed replacement

International Nuclear Information System (INIS)

Yang, Li; Ma, Xiaobing; Zhai, Qingqing; Zhao, Yu

2016-01-01

We propose an inspection and replacement policy for a single component system that successively executes missions with random durations. The failure process of the system can be divided into two states, namely, normal and defective, following the delay time concept. Inspections are carried out periodically and immediately after the completion of each mission (random inspections). The failed state is always identified immediately, whereas the defective state can only be revealed by an inspection. If the system fails or is defective at a periodic inspection, then replacement is immediate. If, however, the system is defective at a random inspection, then replacement will be postponed if the time to the subsequent periodic inspection is shorter than a pre-determined threshold, and immediate otherwise. We derive the long run expected cost per unit time and then investigate the optimal periodic inspection interval and postponement threshold. A numerical example is presented to demonstrate the applicability of the proposed maintenance policy. - Highlights: • A delay time model of inspection is introduced for mission-based systems. • Periodic and random inspections are performed to check the state. • Replacement of the defective system at a random inspection can be postponed.

Multi-stability and almost periodic solutions of a class of recurrent neural networks

International Nuclear Information System (INIS)

Liu Yiguang; You Zhisheng

2007-01-01

This paper studies multi-stability, existence of almost periodic solutions of a class of recurrent neural networks with bounded activation functions. After introducing a sufficient condition insuring multi-stability, many criteria guaranteeing existence of almost periodic solutions are derived using Mawhin's coincidence degree theory. All the criteria are constructed without assuming the activation functions are smooth, monotonic or Lipschitz continuous, and that the networks contains periodic variables (such as periodic coefficients, periodic inputs or periodic activation functions), so all criteria can be easily extended to fit many concrete forms of neural networks such as Hopfield neural networks, or cellular neural networks, etc. Finally, all kinds of simulations are employed to illustrate the criteria

Mechanical construction and installation of the ATLAS tile calorimeter

Energy Technology Data Exchange (ETDEWEB)

Abdallah, J [IFIC, Centro Mixto Universidad de Valencia-CSIC, E46100 Burjassot, Valencia (Spain); Adragna, P; Bosi, F [Pisa University and INFN, Pisa (Italy); Alexa, C; Boldea, V [Institute of Atomic Physics, Bucharest (Romania); Alves, R [LIP and FCTUC University of Coimbra (Portugal); Amaral, P; Andresen, X; Behrens, A; Blocki, J [CERN, Geneva (Switzerland); Ananiev, A [LIP and IDMEC-IST, Lisbon (Portugal); Anderson, K [University of Chicago, Chicago, Illinois (United States); Antonaki, A [University of Athens, Athens (Greece); Batusov, V [JINR, Dubna (Russian Federation); Bednar, P [Comenius University, Bratislava (Slovakia); Bergeaas, E; Bohm, C [Stockholm University, Stockholm (Sweden); Biscarat, C [LPC Clermont-Ferrand, Université Blaise Pascal, Clermont-Ferrand (France); Blanch, O; Blanchot, G [Institut de Fisica d' Altes Energies, Universitat Autònoma de Barcelona, Barcelona (Spain); others, and

2013-11-01

This paper summarises the mechanical construction and installation of the Tile Calorimeter for the ATLAS experiment at the Large Hadron Collider in CERN, Switzerland. The Tile Calorimeter is a sampling calorimeter using scintillator as the sensitive detector and steel as the absorber and covers the central region of the ATLAS experiment up to pseudorapidities ±1.7. The mechanical construction of the Tile Calorimeter occurred over a period of about 10 years beginning in 1995 with the completion of the Technical Design Report and ending in 2006 with the installation of the final module in the ATLAS cavern. During this period approximately 2600 metric tons of steel were transformed into a laminated structure to form the absorber of the sampling calorimeter. Following instrumentation and testing, which is described elsewhere, the modules were installed in the ATLAS cavern with a remarkable accuracy for a structure of this size and weight.

Mechanical construction and installation of the ATLAS tile calorimeter

International Nuclear Information System (INIS)

Abdallah, J; Adragna, P; Bosi, F; Alexa, C; Boldea, V; Alves, R; Amaral, P; Andresen, X; Behrens, A; Blocki, J; Ananiev, A; Anderson, K; Antonaki, A; Batusov, V; Bednar, P; Bergeaas, E; Bohm, C; Biscarat, C; Blanch, O; Blanchot, G

2013-01-01

This paper summarises the mechanical construction and installation of the Tile Calorimeter for the ATLAS experiment at the Large Hadron Collider in CERN, Switzerland. The Tile Calorimeter is a sampling calorimeter using scintillator as the sensitive detector and steel as the absorber and covers the central region of the ATLAS experiment up to pseudorapidities ±1.7. The mechanical construction of the Tile Calorimeter occurred over a period of about 10 years beginning in 1995 with the completion of the Technical Design Report and ending in 2006 with the installation of the final module in the ATLAS cavern. During this period approximately 2600 metric tons of steel were transformed into a laminated structure to form the absorber of the sampling calorimeter. Following instrumentation and testing, which is described elsewhere, the modules were installed in the ATLAS cavern with a remarkable accuracy for a structure of this size and weight

Management for Construction Materials and Control of Construction Waste in Construction Industry: A Review

OpenAIRE

A. A. Gulghane; Prof P. V. Khandve

2015-01-01

In recent treads a wide range of building materials is available for the construction of civil engineering structures. The total cost of materials may be up to 60% or more of the total cost incurred in construction project dependent upon the type of project. Effective construction materials management is a key to success for a construction project. Construction waste is another serious problem in construction industry. A large and various types of construction waste with different...

Nuclear power generation as seen from construction aspect

International Nuclear Information System (INIS)

Osaki, Yorihiko

1984-01-01

The measures to vitalize atomic energy industry in low economical growth age are grasped from the viewpoint of heightening the quality of technology, and the improvement of the economical efficiency of nuclear power generation as seen from construction aspect is discussed. By 2000, the nuclear power generation in Japan will be increased by about four times to 62 million kW, and the proportion of nuclear power increases steadily. Recently, the nuclear power stations in Japan have been stably operated at high level, and the capacity ratio has exceeded 70 %. However, the power generation cost tends to rise, and it is feared that the economical advantage over thermal power will be lost. Recently, the construction cost of nuclear power plants has continued to rise, which causes the high cost of nuclear power. The reason of the high construction cost is in short too much quantity of materials and long construction period. As the proposal to reduce the construction cost, three stages of the rationalization are discussed, such as the rationalization of simulated earthquake for design and the improvement of reactor building design. The promotion of technical development is indispensable for the cost reduction. (Kako, I.)

Treatment of Olive Mill Wastewater with Constructed Wetlands

Directory of Open Access Journals (Sweden)

Andreas N. Angelakis

2012-03-01

Full Text Available The objective of this study was to investigate the application of constructed wetlands as a mean to manage olive mill wastewater (OMW. Two free water surface (FWS constructed wetlands, one without (CW1 and one with effluent recirculation (CW2, were operated for a two-year period with diluted OMW (1:10 and evaluated in terms of the removal of COD, TSS, TKN, NH4+-N, NO3−-N, TP and total phenols. The organic loading rate of CWs was adjusted to 925 kg BOD/ha·d. In CW1 the removal efficiency averaged 80%, 83%, 78%, 80%, and 74% for COD, TSS, TKN, TP, and total phenols, respectively, during the operation period. Effluent recirculation further improved the treatment efficiency which approached 90%, 98%, 87%, 85%, and 87% for COD, TSS, TKN, TP, and total phenols, respectively. Constructed wetlands also showed high removal efficiency for NH4+-N. Nitrate concentration maintained low in both CWs basins, probably due to the prevalence of high denitrification rates that efficiently removed the NO3--N produced by NH4+-N oxidation. Despite the increased removal percentages, pollutant concentration in effluent exceeded the allowable limits for discharge in water bodies, suggesting that additional practices, including enhanced pre-application treatment and/or higher dilution rates, are required to make this practice effective for OMW management.

Earthquake countermeasure work on water intake structure based on post-construction shear reinforcement method

International Nuclear Information System (INIS)

Satou, Yoshihito; Wani, Masaaki; Wachi, Takamitsu

2017-01-01

Hamaoka Nuclear Power Station set up 'earthquake motion as the base for remodeling work' by referring to the strong earthquake fault model assumed by the 'Study meeting for Nankai Trough's mega thrust earthquake model' of the Cabinet Office. Based on this earthquake, it implemented seismic countermeasure work using ceramic fixing type post-construction shear reinforcement bars by targeting the Unit 4 water intake tank screen room. This construction work was carried out in a short period of about nine months due to a restriction in the drainage period of the water intake tank. Thanks to the improvement of process control, such as adoption of a two-shift (day and night) system, this work was completed. On the other hand, the quality of construction was secured by adopting a drilling machine with a resistance sensor at the time of drilling and plastic grout at the time of grout filling, as well as through quality inspection based on Construction Technology Review and Certification. (A.O.)

Greater reproductive investment, but shorter lifespan, in agrosystem than in natural-habitat toads

Directory of Open Access Journals (Sweden)

Francisco Javier Zamora-Camacho

2017-09-01

Full Text Available Global amphibian decline is due to several factors: habitat loss, anthropization, pollution, emerging diseases, and global warming. Amphibians, with complex life cycles, are particularly susceptible to habitat alterations, and their survival may be impaired in anthropized habitats. Increased mortality is a well-known consequence of anthropization. Life-history theory predicts higher reproductive investment when mortality is increased. In this work, we compared age, body size, and different indicators of reproductive investment, as well as prey availability, in natterjack toads (Epidalea calamita from agrosystems and adjacent natural pine groves in Southwestern Spain. Mean age was lower in agrosystems than in pine groves, possibly as a consequence of increased mortality due to agrosystem environmental stressors. Remarkably, agrosystem toads were larger despite being younger, suggesting accelerated growth rate. Although we detected no differences in prey availability between habitats, artificial irrigation could shorten aestivation in agrosystems, thus increasing energy trade. Moreover, agrosystem toads exhibited increased indicators of reproductive investment. In the light of life-history theory, agrosystem toads might compensate for lesser reproductive events—due to shorter lives—with a higher reproductive investment in each attempt. Our results show that agrosystems may alter demography, which may have complex consequences on both individual fitness and population stability.

ANAEROBIC COMPOST CONSTRUCTED WETLANDS SYSTEM TECHNOLOGY - SITE TECHNOLOGY CAPSULE

Science.gov (United States)

In fall 1994, anaerobic compost wetlands in both upflow and down flow configurations were constructed adjacent to and received drainage from the Burleigh tunnel, which forms part of the Clear Creek/Central City Superfund site. The systems were operated over a 3 year period. The ...

Effect of Temperature on Feeding Period of Larval Blacklegged Ticks (Acari: Ixodidae) on Eastern Fence Lizards.

Science.gov (United States)

Rulison, Eric L; Lebrun, Roger A; Ginsberg, Howard S

2014-11-01

Ambient temperature can influence tick development time, and can potentially affect tick interactions with pathogens and with vertebrate hosts. We studied the effect of ambient temperature on duration of attachment of larval blacklegged ticks, Ixodes scapularis Say, to eastern fence lizards, Sceloporus undulatus (Bosc & Daudin). Feeding periods of larvae that attached to lizards under preferred temperature conditions for the lizards (WARM treatment: temperatures averaged 36.6°C at the top of the cage and 25.8°C at the bottom, allowing behavioral thermoregulation) were shorter than for larvae on lizards held under cool conditions (COOL treatment temperatures averaged 28.4°C at top of cage and 24.9°C at the bottom). The lizards were infested with larvae four times at roughly monthly intervals. Larval numbers successfully engorging and dropping declined and feeding period was longer after the first infestation. © 2014 Entomological Society of America.

On the use of volumetric strain meters to infer additional characteristics of short-period seismic radiation

Science.gov (United States)

Borcherdt, R.D.; Johnston, M.J.S.; Glassmoyer, G.

1989-01-01

Volumetric strain meters (Sacks-Evertson design) are installed at 15 sites along the San Andreas fault system, to monitor long-term strain changes for earthquake prediction. Deployment of portable broadband, high-resolution digital recorders (GEOS) at several of the sites extends the detection band for volumetric strain to periods shorter than 5 ?? 10-2 sec and permits the simultaneous observation of seismic radiation fields using conventional short-period pendulum seismometers. Recordings of local and regional earthquakes indicate that dilatometers respond to P energy but not direct shear energy and that straingrams can be used to resolve superimposed reflect P and S waves for inference of wave characteristics not permitted by either sensor alone. Simultaneous measurements of incident P- and S-wave amplitudes are used to introduce a technique for single-station estimates of wave field inhomogeneity, free-surface reflection coefficients and local material P velocity. -from Authors

Improvement of QA/QC activities in the construction of nuclear power plant

International Nuclear Information System (INIS)

Jinji Tomita; Shigetaka Tomaru

1987-01-01

Construction of commercial nuclear power plants in Japan started at around 1965. In this presentation are described quality assurance (QA) activities of a plant supplier who is a manufacturer of the key components as well. The QA activities until now are divided into several periods of the construction history in Japan. First term is 1960's when the QA activities are featured as the study and implementation through the construction of imported plants. Since then technologies and procedures of our own have been established and improved for the construction of high reliability plants. Our present QA activities are based on the active reflection of those lessons learned of past experiences. (author)

Development of a power-assisted lifting device for construction and periodic inspection

International Nuclear Information System (INIS)

Hayatsu, M.; Yamada, M.; Takasu, H.; Tagawa, Y.; Kajiwara, K.

2001-01-01

This study focuses on the control system design and control performance of a power-assisted lifting device. The device consists of several electric chain-blocks, each controlled by force sensors and a CPU. The mechanism is as follows: (1) Force sensors detect any chain tension changes (by human force), (2) The CPU calculates the required output, (3) Electric chain-blocks move the object in the intended direction. The feature of this device is that it does not require any information related to the suspension points of the electric chain-blocks. The controller was designed using the H method, which considers disturbances and aims to provide robust stability under the operation conditions of construction verified through experiments using a 700 kg steel dummy mass (control object) suspended by four electric chain-blocks. In the experiments, the controller, which was designed using the H method, was compared to the PI controller method, and the effectiveness of the H controller was proven. A control object could be moved, translated, and rotated by human force (of less than 10 kg). Positioning performance errors were suppressed to less than 0.5 mm, and operation time was reduced by about 50%. This device will improve working efficiency and rationalize lifting operations in nuclear power plants. (author)

Development of a power-assisted lifting device for construction and periodic inspection

Energy Technology Data Exchange (ETDEWEB)

Hayatsu, M.; Yamada, M.; Takasu, H. [Hitachi Plant Engineering and Construction, Chiba-ken (Japan); Tagawa, Y. [Tokyo Univ. of Agriculture and Technology (Japan); Kajiwara, K. [National Research Institute for Earth Science and Disaster Prevention, Tokyo (Japan)

2001-07-01

This study focuses on the control system design and control performance of a power-assisted lifting device. The device consists of several electric chain-blocks, each controlled by force sensors and a CPU. The mechanism is as follows: (1) Force sensors detect any chain tension changes (by human force), (2) The CPU calculates the required output, (3) Electric chain-blocks move the object in the intended direction. The feature of this device is that it does not require any information related to the suspension points of the electric chain-blocks. The controller was designed using the H method, which considers disturbances and aims to provide robust stability under the operation conditions of construction verified through experiments using a 700 kg steel dummy mass (control object) suspended by four electric chain-blocks. In the experiments, the controller, which was designed using the H method, was compared to the PI controller method, and the effectiveness of the H controller was proven. A control object could be moved, translated, and rotated by human force (of less than 10 kg). Positioning performance errors were suppressed to less than 0.5 mm, and operation time was reduced by about 50%. This device will improve working efficiency and rationalize lifting operations in nuclear power plants. (author)

Existence of extremal periodic solutions for quasilinear parabolic equations

Directory of Open Access Journals (Sweden)

Siegfried Carl

1997-01-01

bounded domain under periodic Dirichlet boundary conditions. Our main goal is to prove the existence of extremal solutions among all solutions lying in a sector formed by appropriately defined upper and lower solutions. The main tools used in the proof of our result are recently obtained abstract results on nonlinear evolution equations, comparison and truncation techniques and suitably constructed special testfunction.

Optimal duration of fasting period after endoscopic submucosal dissection for gastric epithelial neoplasia: A prospective evaluation.

Science.gov (United States)

Oh, Kwang Hoon; Lee, Sang Jin; Park, Jong Kyu

2017-08-01

There are currently no standardized guidelines for adequately determining the fasting period following gastric endoscopic submucosal dissection (ESD). The aim of this study was to determine the appropriate fasting period. The enrolled patients were randomized into a short and a long-fasting group. In the short-fasting group, patients had fasted until the day after the ESD. In the long-fasting group, patients had fasted until 2 days after the ESD. A second-look endoscopy was performed immediately prior to starting to eat meals. The primary end-point was the measurement of discomfort-related ESD after starting meals such as epigastric pain, heartburn, regurgitation, nausea and vomiting. Secondary end-points included the bleeding rate after starting meals, hospital stay, patient satisfaction and hemostasis upon second-look endoscopy. We analyzed data from 101 of 110 randomized patients. Both groups demonstrated similar baseline characteristics. There were no significant differences in reports of epigastric pain, heartburn, regurgitation, nausea and vomiting after starting meals. Both groups demonstrated similar hemostasis rates upon second-look endoscopy (26% vs 31.4%, P = 0.551) and bleeding rate (4% vs 0%, P = 0.149). The duration of hospital stay was significantly shorter in the short-fasting group (4.3 days vs 5.1 days, P fasting group. A short fasting protocol does not cause discomfort related to ESD or influence post-ESD bleeding. Moreover, the short fasting protocol results in shorter hospital stays and greater patient satisfaction. © 2017 Chinese Medical Association Shanghai Branch, Chinese Society of Gastroenterology, Renji Hospital Affiliated to Shanghai Jiaotong University School of Medicine and John Wiley & Sons Australia, Ltd.

Nitrogen and COD Removal from Septic Tank Wastewater in Subsurface Flow Constructed Wetlands: Plants Effects.

Science.gov (United States)

Collison, R S; Grismer, M E

2015-11-01

We evaluated subsurface flow (SSF) constructed wetland treatment performance with respect to organics (COD) and nitrogen (ammonium and nitrate) removal from domestic (septic tank) wastewater as affected by the presence of plants, substrate "rock" cation exchange capacity (CEC), laboratory versus field conditions and use of synthetic as compared to actual domestic wastewater. This article considers the effects of plants on constructed wetland treatment in the field. Each constructed wetland system was comprised of two beds (2.6 m long by 0.28 m wide and deep filled with ~18 mm crushed lava rock) separated by an aeration tank connected in series. The lava rock had a porosity of ~47% and a CEC of 4 meq/100 gm. One pair of constructed wetland systems was planted with cattails in May 2008, while an adjacent pair of systems remained un-planted. Collected septic tank or synthesized wastewater was allowed to gravity feed each constructed wetland system and effluent samples were regularly collected and tested for COD and nitrogen species during four time periods spanning November 2008 through June 2009. These effluent concentrations were tested for statistical differences at the 95% level for individual time periods as well as the overall 6-month period. Organics removal from domestic wastewater was 78.8% and 76.1% in the planted and un-planted constructed wetland systems, respectively, while ammonium removal was 94.5% and 90.2%, respectively. Similarly, organics removal from the synthetic wastewater of equivalent strength was 88.8% and 90.1% for planted and un-planted constructed wetland systems, respectively, while ammonium removal was 96.9% and 97.3%, respectively.

Determination of quarantine period in African catfish (Clarias gariepinus) fed with pig (Sus sp.) offal to assure compliance with halal standards.

Science.gov (United States)

Wan Norhana, M N; Dykes, G A; Padilah, B; Ahmad Hazizi, A A; Masazurah, A R

2012-12-01

Pig (Sus sp.) and pig by-products are considered as najasa (impurities) in Islam and forbidden in Muslim consumer products. Animals fed on najasa are categorised as al-jallālah (contaminated animals) which are allowed to be consumed as long as they have been quarantined for a certain period of time. During this quarantine period the animals will have undergone a natural purification process or istihālah. African catfish (Clarias gariepinus) are commonly consumed in Malaysia and may be fed on najasa. This study was carried out to estimate the istihālah period for catfish after feeding with pig offal, based on the absence of pig DNA in catfish gut and to suggest the quarantine period in catfish fed with pig offal. The results indicated that the maximum istihālah period could reach 36h in the stomach, 6h in the midgut and less than 2h in the hindgut although in many cases shorter periods were observed. Based on these results it is estimated that the minimum quarantine period for catfish fed with pig offal is 1.5days. Copyright © 2012 Elsevier Ltd. All rights reserved.

Canadian nuclear power plant construction cost forecast and analysis

International Nuclear Information System (INIS)

Keng, C.W.K.

1985-01-01

Because of the huge volume of capital required to construct a modern electric power generating station, investment decisions have to be made with as complete an understanding of the consequence of the decision as possible. This understanding must be provided by the evaluation of the situation to take place in the future. This paper attempts to use an econometric method to forecast the construction costs escalation of a standard Canadian nuclear generating station (NGS). A review of the history of Canadian nuclear electric power is provided. The major components of the construction costs of a Canadian NGS are studied and summarized. A data base is built and indexes are prepared. Based on these indexes an econometric forecasting model is constructed using an apparently new econometric methodology of forecasting modelling. Forecasts for a period of forty years are generated and applications of alternative scenario forecasts and range forecasts to uncertainty assessment are demonstrated. The indexes, the model, and the forecasts and their applications, to the best of the author's knowledge, are the very first ever done for Canadian NGS constructions

Using constructive alignment theory to develop nursing skills curricula.

Science.gov (United States)

Joseph, Sundari; Juwah, Charles

2012-01-01

Constructive alignment theory has been used to underpin the development of curricula in higher education for some time (Biggs and Tang, 2007), however, its use to inform and determine skills curricula in nursing is less well documented. This paper explores the use of constructive alignment theory within a study of undergraduate student nurses undertaking clinical skill acquisition in the final year of a BSc (Hons) Nursing course. Students were followed up as newly qualified nurses (NQN) (n = 58) to ascertain the impact of skill acquisition in this way. Comparisons were made with newly qualified nurses who did not participate in a constructively aligned curriculum. This mixed methods study reported skill identification within the immediate post-registration period and evaluated the constructively aligned curriculum as having positive benefits for NQNs in terms of confidence to practice. This was supported by preceptors' views. The study recommends two process models for nursing skills curriculum development and reports that constructive alignment is a useful theoretical framework for nurse educators. Copyright © 2011 Elsevier Ltd. All rights reserved.

An estimate of equatorial wave energy flux at 9- to 90-day periods in the Central Pacific

Science.gov (United States)

Eriksen, Charles C.; Richman, James G.

1988-01-01

Deep fluctuations in current along the equator in the Central Pacific are dominated by coherent structures which correspond closely to narrow-band propagating equatorial waves. Currents were measured roughly at 1500 and 3000 m depths at five moorings between 144 and 148 deg W from January 1981 to March 1983, as part of the Pacific Equatorial Ocean Dynamics program. In each frequency band resolved, a single complex empirical orthogonal function accounts for half to three quarters of the observed variance in either zonal or meridional current. Dispersion for equatorial first meridional Rossby and Rossby gravity waves is consistent with the observed vertical-zonal coherence structure. The observations indicate that energy flux is westward and downward in long first meridional mode Rossby waves at periods 45 days and longer, and eastward and downward in short first meridional mode Rossby waves and Rossby-gravity waves at periods 30 days and shorter. A local minimum in energy flux occurs at periods corresponding to a maximum in upper-ocean meridional current energy contributed by tropical instability waves. Total vertical flux across the 9- to 90-day period range is 2.5 kW/m.

Mathematical observations on the relation between eclosion periods and the copulation rate of cicadas.

Science.gov (United States)

Saisho, Yasumasa

2010-04-01

In many species of cicadas the peak of eclosion of males precedes that of females. In this paper, we construct a stochastic model and consider whether this sexual difference of eclosion periods works against mating or not. We also discuss the relation between the peak period of copulations and the development of population number by using this model.

Optimal replacement and inspection periods of safety and control boards in Wolsung nuclear power plant unit 1

International Nuclear Information System (INIS)

Mok, Jin Il

1993-02-01

In nuclear power plants, the safety and control systems are important for operating and maintaining safety of nuclear power plants. Due to the failure of the instrument and control devices of nuclear power plants caused by aging, nuclear power plants occasionally trip. Since the start of first commercial operation of Kori nuclear power plant (NPP) unit 1, the trips caused by instrument and control systems account for 28% of total trips of NPPs in Korea. Even a single trip of a nuclear power plant causes an extravagant economical loss and deteriorates public acceptance of nuclear power plants. Therefore, the replacement of the instrument and control devices with proper consideration of the aging effect is necessary in order to prevent the inadvertent trip. In this work we investigated the optimal replacement periods of the digital control computer's (DCC) and the programmable digital comparator's (PDC) electronic circuit boards of Wolsung nuclear power plant Unit 1. We first derived mathematical models which calculate optimal replacement periods for electronic circuit boards of digital control computer (DCC) and for those of the programmable digital comparator (PDC) in Wolsung NPP unit 1. And we analytically obtained the optimal replacement periods of electronic circuit boards by using these models. We compared these periods with the replacement periods currently used at Wolsung NPP Unit. The periods used at Wolsung is not based on mathematical analysis, but on empirical knowledge. As a consequence, the optimal replacement periods analytically obtained for the electronic circuit boards of DCC and those used in the field shown small difference : the optimal replacement periods analytically obtained for the electronic circuit boards of PDC are shorter than those used in the field in general. The engineered safeguards of Wolsung nuclear power plant unit 1 contains redundant systems of 2-out-of-3 logic which are not operating under normal conditions but they are called

Global attractivity of an almost periodic N-species nonlinear ecological competitive model

Science.gov (United States)

Xia, Yonghui; Han, Maoan; Huang, Zhenkun

2008-01-01

By using comparison theorem and constructing suitable Lyapunov functional, we study the following almost periodic nonlinear N-species competitive Lotka-Volterra model: A set of sufficient conditions is obtained for the existence and global attractivity of a unique positive almost periodic solution of the above model. As applications, some special competition models are studied again, our new results improve and generalize former results. Examples and their simulations show the feasibility of our main results.

Construction of ideas and practice for 'nuclear geology featured database'

International Nuclear Information System (INIS)

Hu Guanglin; Feng Kai

2010-01-01

East China Institute of Technology is engaged in training person in areas of Nuclear Resource exploration. It is Nuclear Featured multi-Institute of Technology. At present, our library was done several collections system, which were focusing on Uranium and Geology. The library decide to be organizational force to construct Nuclear and Geology Featured database and put into use as soon as possible. 'Nuclear Geology Featured Database' put forward for construction principles of uniqueness, standardization, completeness, practicality, security and respecting knowledge property rights. The database contains 'Map and Table', 'periodical thesis', 'dissertations', 'conference papers', newspapers', 'books', ect. The types of literatures mainly includes monographs, periodicals, dissertations, conference papers, newspapers, as well as videos. The database can get information by ways of searching titles, authors and texts, and gradually become a more authoritative Nuclear Geology Database for study. (authors)

Self-publishing of Lithuanian cultural periodicals in Soviet and contemporary times

Directory of Open Access Journals (Sweden)

Asta Urbanaviciute

2015-07-01

Full Text Available The aim of this article is to analyse self-publishing trends of Lithuanian cultural periodicals focusing on the historical and contemporary contexts. The article provides an overview of the reasons for historical cultural periodical self-published texts, known as samizdats, to appear, as well as their publishing and circulation trends in Lithuania. It also analyses what contemporary cultural self-publishing is: whether it is a completely independent, logical consequence of the digital age, which emerged under favourable circumstances, or if it can be characterized as having something in common with the past experiences. The most active years of the periodical underground press publishing in Soviet Lithuanian self-publishing development were between 1975 and 1981. Self-published texts ideologically diverged into three main directions: religious, civic, and cultural-artistic. A total of 22 publications were being published for a longer or shorter period of time. While analysing contemporary cultural self-publishing topics, the report focuses only on online cultural texts, irrespective of the printed ones. Survey method was used to find out how much and in what aspect modern Internet users perceive historical periodical self-publishing, and how and in what aspect they value modern cultural self-published texts. The results show that 18-35-year-old respondents have not acquired the skills necessary to analyse samizdat publishing. They associate the word self-publishing with digital texts only, which due to favourable conditions spread easily through social networks and blogs. In the era of advancing computer technologies and the Internet, every person who has the time and desire may become a developer, an author, or at least a disseminator of information: this tradition is becoming more and more topical and quite frequently – an almost self-evident phenomenon.

THE FREQUENCY OF LOW-MASS EXOPLANETS. III. TOWARD η+ AT SHORT PERIODS

International Nuclear Information System (INIS)

Wittenmyer, Robert A.; Tinney, C. G.; Bailey, J.; Horner, J.; Butler, R. P.; O'Toole, Simon J.; Jones, H. R. A.; Carter, B. D.

2011-01-01

Determining the occurrence rate of 'super-Earth' planets (m sin i + ) is a critically important step on the path toward determining the frequency of Earth-like planets (η + ), and hence the uniqueness of our solar system. Current radial-velocity surveys, achieving precisions of 1 m s -1 , are now able to detect super-Earths and provide meaningful estimates of their occurrence rate. We present an analysis of 67 solar-type stars from the Anglo-Australian Planet Search specifically targeted for very high precision observations. When corrected for incompleteness, we find that the planet occurrence rate increases sharply with decreasing planetary mass. Our results are consistent with those from other surveys: in periods shorter than 50 days, we find that 3.0% of stars host a giant (msin i > 100 M + ) planet, and that 17.4% of stars host a planet with msin i + . The preponderance of low-mass planets in short-period orbits is in conflict with formation simulations in which the majority of super-Earths reside at larger orbital distances. This work gives a hint as to the size of η + , but to make meaningful predictions on the frequency of terrestrial planets in longer, potentially habitable orbits, low-mass terrestrial planet searches at periods of 100-200 days must be made an urgent priority for ground-based Doppler planet searches in the years ahead.

The role of latency period in quality management for free-breathing coronary wall MRI.

Science.gov (United States)

Lin, Kai; Lloyd-Jones, Donald M; Liu, Ying; Bi, Xiaoming; Lu, Biao; Li, Debiao; Carr, James C

2015-03-01

The aim of the present study was to determine the effects of the latency period on the performance of free-breathing coronary wall MRI. With the approval of IRB, 70 participants were recruited for coronary wall magnetic resonance imaging (MRI) and provided written informed consent. In 35 subjects, right coronary segments (RCA1-3) were imaged first; in the remaining subjects, the left coronary segments (LM and LAD1-3) were imaged first. The images were classified into groups; group 1 contained right coronary images from the subjects whose right coronary segments were imaged first and left coronary images from the subjects whose left coronary segments were imaged first. Group 2 contained the other coronary segments. The image scores (ranked1-3), latency periods, drift of the position of the navigator (NAV), scan efficiency were compared between image groups. Image group 1 has higher scores (1.66 ± 0.55 vs. 1.46 ± 0.51), shorter latency periods (32.04 ± 4.24 vs. 44.22 ± 5.57 min), lower drift in the location of the NAV (1.90 ± 1.27 mm vs. 2.61 ± 1.71 mm) and higher scan efficiency (32.7 ± 7.6 vs. 29.9 ± 7.9%) than group 2. Long latency periods have a significantly negative impact on the image quality of coronary wall MRI.

Existence and Asymptotic Stability of Periodic Solutions of the Reaction-Diffusion Equations in the Case of a Rapid Reaction

Science.gov (United States)

Nefedov, N. N.; Nikulin, E. I.

2018-01-01

A singularly perturbed periodic in time problem for a parabolic reaction-diffusion equation in a two-dimensional domain is studied. The case of existence of an internal transition layer under the conditions of balanced and unbalanced rapid reaction is considered. An asymptotic expansion of a solution is constructed. To justify the asymptotic expansion thus constructed, the asymptotic method of differential inequalities is used. The Lyapunov asymptotic stability of a periodic solution is investigated.

A supermolecular building approach for the design and construction of metal–organic frameworks

KAUST Repository

Guillerm, Vincent; Kim, Dongwook; Eubank, Jarrod F.; Luebke, Ryan; Liu, Xinfang; Adil, Karim; Lah, Myoung Soo; Eddaoudi, Mohamed

2014-01-01

In this review, we describe two recently implemented conceptual approaches facilitating the design and deliberate construction of metal–organic frameworks (MOFs), namely supermolecular building block (SBB) and supermolecular building layer (SBL) approaches. Our main objective is to offer an appropriate means to assist/aid chemists and material designers alike to rationally construct desired functional MOF materials, made-to-order MOFs. We introduce the concept of net-coded building units (net-cBUs), where precise embedded geometrical information codes uniquely and matchlessly a selected net, as a compelling route for the rational design of MOFs. This concept is based on employing pre-selected 0-periodic metal–organic polyhedra or 2-periodic metal–organic layers, SBBs or SBLs respectively, as a pathway to access the requisite net-cBUs. In this review, inspired by our success with the original rht-MOF, we extrapolated our strategy to other known MOFs via their deconstruction into more elaborate building units (namely polyhedra or layers) to (i) elucidate the unique relationship between edge-transitive polyhedra or layers and minimal edge-transitive 3-periodic nets, and (ii) illustrate the potential of the SBB and SBL approaches as a rational pathway for the design and construction of 3-periodic MOFs. Using this design strategy, we have also identified several new hypothetical MOFs which are synthetically targetable.

A supermolecular building approach for the design and construction of metal–organic frameworks

KAUST Repository

Guillerm, Vincent

2014-07-10

In this review, we describe two recently implemented conceptual approaches facilitating the design and deliberate construction of metal–organic frameworks (MOFs), namely supermolecular building block (SBB) and supermolecular building layer (SBL) approaches. Our main objective is to offer an appropriate means to assist/aid chemists and material designers alike to rationally construct desired functional MOF materials, made-to-order MOFs. We introduce the concept of net-coded building units (net-cBUs), where precise embedded geometrical information codes uniquely and matchlessly a selected net, as a compelling route for the rational design of MOFs. This concept is based on employing pre-selected 0-periodic metal–organic polyhedra or 2-periodic metal–organic layers, SBBs or SBLs respectively, as a pathway to access the requisite net-cBUs. In this review, inspired by our success with the original rht-MOF, we extrapolated our strategy to other known MOFs via their deconstruction into more elaborate building units (namely polyhedra or layers) to (i) elucidate the unique relationship between edge-transitive polyhedra or layers and minimal edge-transitive 3-periodic nets, and (ii) illustrate the potential of the SBB and SBL approaches as a rational pathway for the design and construction of 3-periodic MOFs. Using this design strategy, we have also identified several new hypothetical MOFs which are synthetically targetable.

Stochastic responses of tumor–immune system with periodic treatment

International Nuclear Information System (INIS)

Li Dong-Xi; Li Ying

2017-01-01

We investigate the stochastic responses of a tumor–immune system competition model with environmental noise and periodic treatment. Firstly, a mathematical model describing the interaction between tumor cells and immune system under external fluctuations and periodic treatment is established based on the stochastic differential equation. Then, sufficient conditions for extinction and persistence of the tumor cells are derived by constructing Lyapunov functions and Ito’s formula. Finally, numerical simulations are introduced to illustrate and verify the results. The results of this work provide the theoretical basis for designing more effective and precise therapeutic strategies to eliminate cancer cells, especially for combining the immunotherapy and the traditional tools. (paper)

A non-parametric estimator for the doubly-periodic Poisson intensity function

NARCIS (Netherlands)

R. Helmers (Roelof); I.W. Mangku (Wayan); R. Zitikis

2007-01-01

textabstractIn a series of papers, J. Garrido and Y. Lu have proposed and investigated a doubly-periodic Poisson model, and then applied it to analyze hurricane data. The authors have suggested several parametric models for the underlying intensity function. In the present paper we construct and

The Dynamic Relationship between Growth and Profitability under Long-Term Recession: The Case of Korean Construction Companies

Directory of Open Access Journals (Sweden)

Seungkyu Yoo

2015-12-01

Full Text Available We conducted an empirical analysis of the dynamic relationship between growth and profitability for small- and medium-sized construction companies that faced long-term economic stagnation in Korea. The period of the analysis spanned 2000 to 2014, and the full period was divided into two halves: before the 2008 global financial crisis and after it. Our empirical model was based on the system generalized method of moments model, and 264 construction companies were used as the study sample. The results of the empirical analysis are as follows. (1 A profitability-driven management strategy limits company growth, thus prolonging the economic downturn; (2 When the macroeconomic environment is relatively stable, high growth in the previous period fosters profitability in the current period. This implies that the phenomenon of dynamic increasing returns is present in the Korean construction industry, and learning through growth enhances productivity and profitability. Consequentially, a strategy oriented towards short-term profitability (popular with small- and medium-sized Korean construction companies makes the corporate management less resilient, causing them to select “de-growth” during the long-term stagnation by decreasing their scale of operations. Accordingly, it is important for companies to maintain the balance between growth and profitability.

Measuring the effects of using ICT/BIM in construction projects

DEFF Research Database (Denmark)

Lambrecht, Jan Fuglsig; Vestergaard, Flemming; Karlshøj, Jan

2016-01-01

This paper focuses on presenting part of the findings from a research project completed in the period of 2009-2013.The research project was funded by the Danish Building & Property Agency with the primary aim to identify and measure the economic effects of using ICT/BIM in construction projects....... Firstly, this paper presents a conceptual evaluation method developed in order to define and describe how case studies focusing on use of ICT/BIM in construction projects could be completed in order to measure (both quantitatively and qualitatively) the effects achieved from using ICT/BIM in construction...... projects. In this context effects are defined both as tangible and intangible effects (both economically and non-economically) directly and/or indirectly as a consequence of using ICT/BIM in a construction project. Secondly, the paper presents and analyses findings achieved from completing four case...

Periodical cicadas: A minimal automaton model

Science.gov (United States)

de O. Cardozo, Giovano; de A. M. M. Silvestre, Daniel; Colato, Alexandre

2007-08-01

The Magicicada spp. life cycles with its prime periods and highly synchronized emergence have defied reasonable scientific explanation since its discovery. During the last decade several models and explanations for this phenomenon appeared in the literature along with a great deal of discussion. Despite this considerable effort, there is no final conclusion about this long standing biological problem. Here, we construct a minimal automaton model without predation/parasitism which reproduces some of these aspects. Our results point towards competition between different strains with limited dispersal threshold as the main factor leading to the emergence of prime numbered life cycles.

Projected costs of generating electricity from power stations for commissioning in the period 1995-2000

International Nuclear Information System (INIS)

1989-01-01

The study reviews the projected electricity generation costs for the base load power generation options expected to be available in the medium term, using an agreed common economic methodology. Cost projections were obtained for nuclear and fossil fuelled plants that could in principle be commissioned in the mid-1990s, or shortly thereafter, although not all countries plan to commission plants at that time. The major changes in expectations compared with earlier studies, apart from those associated with changed perceptions of fossil fuel prices, include significantly lower nuclear investment costs for the United States, associated with an improved design and the expectation of achieving shorter construction periods than projected in the 1985 study, and generally lower nuclear fuel costs. Some countries project higher operation and maintenance costs for either coal-fired or nuclear plant or both. In the case of coal-fired plants these may be associated with the extra costs of operating desulphurisation equipment. The most marked change in nuclear operating and maintenance costs has taken place in the United States, where these costs are now expected to be twice as large as the projected nuclear fuel costs. There remain major differences in investment cost expectations between countries. The reasons for these differences have been examined in previous studies. They arise from differences in factor costs, regulatory approach, design and siting, and exchange rates which do not adequately reflect the differences in the capital investment costs between countries. In brief, most OECD countries continue to expect nuclear power to have a lower levelised generating cost than coal-fired generation when using their own technical and economic assumptions

Water Purification Characteristic of the Actual Constructed Wetland with Carex dispalata in a Cold Area

Science.gov (United States)

Tsuji, Morio; Yamada, Kazuhiro; Hiratsuka, Akira; Tsukada, Hiroko

Carex dispalata, a native plant species applied in cold districts for water purification in constructed wetlands, has useful characteristics for landscape creation and maintenance. In this study, seasonal differences in purification ability were verified, along with comparison of frozen and non-frozen periods' performance. A wetland area was constructed using a “hydroponics method” and a “coir fiber based method”. Results show that the removal rates of BOD, SS, and Chl-a were high. On this constructed wetland reduces organic pollution, mainly phytoplankton, but the removal of nitrogen and phosphorus was insufficient. The respective mean values of influent and treated water during three years were 26.6 mg/L and 12.2 mg/L for BOD, and 27.9 mg/L and 7.5 mg/L for SS. The mean value of the BOD removal rate for the non-frozen period was 2.99 g/m2/d that for the frozen period was 1.86 g/m2/d. The removal rate followed the rise of the BOD load rate. The removal rate limits were about 4 g/m2/d during the frozen period and 15 g/m2/d during the non-frozen period. For operations, energy was unnecessary. The required working hours were about 20 h annually for all maintenance and management during operations.

Lung cancer risk among construction workers in California, 1988-2007.

Science.gov (United States)

Calvert, Geoffrey M; Luckhaupt, Sara; Lee, Soo-Jeong; Cress, Rosemary; Schumacher, Pam; Shen, Rui; Tak, SangWoo; Deapen, Dennis

2012-05-01

Although lung cancer risks can vary by race/ethnicity and by construction occupation, these risks have not been examined extensively. This study analyzed 110,937 lung cancer cases identified from the California Cancer Registry between 1988 and 2007. Mean age at diagnosis, proportion diagnosed at an advanced stage, and proportion with 3-year survival were calculated for lung cancer cases employed in the construction industry. Case-control methodology was also used to assess the risk of lung cancer. Morbidity odds ratios (MORs) were estimated by conditional logistic regression. Construction workers were found to have a significantly elevated risk for all lung cancer combined (MOR = 1.57) and for each lung cancer histologic subtype examined. All construction occupations, except managers/engineers and supervisors, had a significantly elevated risk for all lung cancer combined. Roofers and welders had the highest risks for total lung cancer and for each of the histologic subtypes. Construction workers in each of the four race/ethnicity groups also had significantly increased lung cancer risks. Compared to non-construction workers, construction workers were diagnosed at an earlier age, at a more advanced stage, and had significantly lower 3-year survival, though differences were modest. These findings justify additional reductions in carcinogenic exposures in construction, and increased support for smoking cessation programs at construction sites. Copyright © 2012 Wiley Periodicals, Inc.

Evolution of periodicity in periodical cicadas.

Science.gov (United States)

Ito, Hiromu; Kakishima, Satoshi; Uehara, Takashi; Morita, Satoru; Koyama, Takuya; Sota, Teiji; Cooley, John R; Yoshimura, Jin

2015-09-14

Periodical cicadas (Magicicada spp.) in the USA are famous for their unique prime-numbered life cycles of 13 and 17 years and their nearly perfectly synchronized mass emergences. Because almost all known species of cicada are non-periodical, periodicity is assumed to be a derived state. A leading hypothesis for the evolution of periodicity in Magicicada implicates the decline in average temperature during glacial periods. During the evolution of periodicity, the determinant of maturation in ancestral cicadas is hypothesized to have switched from size dependence to time (period) dependence. The selection for the prime-numbered cycles should have taken place only after the fixation of periodicity. Here, we build an individual-based model of cicadas under conditions of climatic cooling to explore the fixation of periodicity. In our model, under cold environments, extremely long juvenile stages lead to extremely low adult densities, limiting mating opportunities and favouring the evolution of synchronized emergence. Our results indicate that these changes, which were triggered by glacial cooling, could have led to the fixation of periodicity in the non-periodical ancestors.

Crustal structure of Australia from ambient seismic noise tomography

Science.gov (United States)

Saygin, Erdinc; Kennett, B. L. N.

2012-01-01

Surface wave tomography for Australian crustal structure has been carried out using group velocity measurements in the period range 1-32 s extracted from stacked correlations of ambient noise between station pairs. Both Rayleigh wave and Love wave group velocity maps are constructed for each period using the vertical and transverse component of the Green's function estimates from the ambient noise. The full suite of portable broadband deployments and permanent stations on the continent have been used with over 250 stations in all and up to 7500 paths. The permanent stations provide a useful link between the various shorter-term portable deployments. At each period the group velocity maps are constructed with a fully nonlinear tomographic inversion exploiting a subspace technique and the Fast Marching Method for wavefront tracking. For Rayleigh waves the continental coverage is good enough to allow the construction of a 3D shear wavespeed model in a two stage approach. Local group dispersion information is collated for a distribution of points across the continent and inverted for a 1D SV wavespeed profile using a Neighbourhood Algorithm method. The resulting set of 1D models are then interpolated to produce the final 3D wavespeed model. The group velocity maps show the strong influence of thick sediments at shorter periods, and distinct fast zones associated with cratonic regions. Below the sediments the 3D shear wavespeed model displays significant heterogeneity with only moderate correlation with surface tectonic features. For example, there is no evident expression of the Tasman Line marking the eastern edge of Precambrian outcrop. The large number of available inter-station paths extracted from the ambient noise analysis provide detailed shear wavespeed information for crustal structure across the Australian continent for the first time, including regions where there was no prior sampling because of difficult logistics.

EPR project construction cost control

International Nuclear Information System (INIS)

Duflo, D.; Pouget-Abadie, X.; Dufour, A.; Kauffmann, G.

2001-01-01

The EPR project is now managed by EDF in cooperation with the German Utilities. The main engineering activities for this period are related to the preparation of construction project management, deepening of some safety issues, definition of the project technical reference. The EPR project concerns the so-called reference unit, that is an isolated first-off unit, with unit electrical power of about 1500 MW. The construction costs evaluated are those of the nuclear island, the conventional island, site facilities, installation work and the administrative buildings. The EPR project construction cost evaluation method applies to all the equipment installed and commissioned. It requires the availability of a preliminary project detailed enough to identify the bill of quantities. To these quantities are then assigned updated unit prices that are based either on cost bases for similar and recent facilities or taken from request for quotation for similar equipment or result from gains due to contractual conditions benefiting from simplifications in the functional and technical specifications. The input and output data are managed in a model that respects the breakdown on which the evaluation method is based. The structural organization of this method reflects a functional breakdown on the one hand (nuclear island, conventional island, common site elements) and on the other hand a breakdown according to equipment or activity (civil engineering, mechanics, electricity, instrumentation and control). This paper discusses the principle and the method of construction cost evaluation carried out, the cost data base and input and output parameters as well as results and oncoming cost analysis tasks. (author)

Next Generation CANDU: Conceptual Design for a Short Construction Schedule

International Nuclear Information System (INIS)

Hopwood, Jerry M.; Love, Ian J.W.; Elgohary, Medhat; Fairclough, Neville

2002-01-01

Atomic Energy of Canada Ltd. (AECL) has very successful experience in implementing new construction methods at the Qinshan (Phase III) twin unit CANDU 6 plant in China. This paper examines the construction method that must be implemented during the conceptual design phase of a project if short construction schedules are to be met. A project schedule of 48 months has been developed for the nth unit of NG (Next Generation) CANDU with a 42 month construction period from 1. Concrete to In-Service. An overall construction strategy has been developed involving paralleling project activities that are normally conducted in series. Many parts of the plant will be fabricated as modules and be installed using heavy lift cranes. The Reactor Building (RB), being on the critical path, has been the focus of considerable assessment, looking at alternative ways of applying the construction strategy to this building. A construction method has been chosen which will result in excess of 80% of internal work being completed as modules or as very streamlined traditional construction. This method is being further evaluated as the detailed layout proceeds. Other areas of the plant have been integrated into the schedule and new construction methods are being applied to these so that further modularization and even greater paralleling of activities will be achieved. It is concluded that the optimized construction method is a requirement, which must be implemented through all phases of design to make a 42 month construction schedule a reality. If the construction methods are appropriately chosen, the schedule reductions achieved will make nuclear more competitive. (authors)

A Study of Construction Reactor Oversight Process in US

International Nuclear Information System (INIS)

Yun, I.; Kim, S. Y.; Jeong, G. Y.; Kim, S. P.

2015-01-01

This process provides a risk-informed approach such as construction significance determination process (SDP) and construction program performance index analogous to those used in the Reactor Oversight Process (ROP). The cROP has been applied to Vogtle units 3, 4 and V.C. Summer units 2, 3 under construction for the regulatory inspection. In this paper, the cROP is dissected to present its major contents and characteristics. The main features of the cROP can be summarized as followings: 1) The cROP which adopts the concept of the ROP used for operating NPPs assesses NPP under construction periodically to determine the appropriate level of regulatory response. 2) The cROP consists of three parts: the CIP, the CAP and the CEP. 3) The inspections for NPPs under construction can be categorized into three parts: vendor inspection, baseline inspection and supplemental and plant specific inspections. USNRC's regulatory resources can be used effectively based on baseline inspection, which is using ITAAC inspections. The construction SDP is used to assign the color scheme to categorize the significance of inspection findings. Regulatory actions are taken from CAM to which the significance of inspection findings input. In this paper, major contents and characteristics of USNRC's cROP have been presented

Safety-related concrete structure design and construction of Rokkasho Reprocessing Plant

International Nuclear Information System (INIS)

Morishita, Hideki; Munakata, Yoshinari; Togashi, Akihito

2003-01-01

The Rokkasho Reprocessing Plant of the Japan Nuclear Fuel Co. Ltd., is a facility to reprocess remained uranium without firing and newly formed plutonium contained in spent fuels used at the nuclear power stations, to produce fuels to be repeatedly used. Constructions in this facility has some characteristics shown as follows: 1) radiation shielding and seismic isolated functions like those at the nuclear power plants, 2) reduction of wall thickness based on partially using heavy concrete at walls required for radiation shielding, 3) protective design against fly-coming matters such as aircrafts, 4) construction period reduction based on winter construction and large scale block engineering. Here were described characteristics of designs on radiation shielding, seismic isolated and fly-coming matters protection construction engineering and quality control on concrete. (G.K.)

Construction management

CERN Document Server

Pellicer, Eugenio; Teixeira, José C; Moura, Helder P; Catalá, Joaquín

2014-01-01

The management of construction projects is a wide ranging and challenging discipline in an increasingly international industry, facing continual challenges and demands for improvements in safety, in quality and cost control, and in the avoidance of contractual disputes. Construction Management grew out of a Leonardo da Vinci project to develop a series of Common Learning Outcomes for European Managers in Construction. Financed by the European Union, the project aimed to develop a library of basic materials for developing construction management skills for use in a pan-European context. Focused exclusively on the management of the construction phase of a building project from the contractor's point of view, Construction Management covers the complete range of topics of which mastery is required by the construction management professional for the effective delivery of new construction projects. With the continued internationalisation of the construction industry, Construction Management will be required rea...

Construction of Daiichi Tamagawa bridge; Daiichi Tamagawa kyoryo no seko

Energy Technology Data Exchange (ETDEWEB)

Watanabe, O.; Tsuyoshi, T. [East Japan Railway Company, Tokyo (Japan); Ota, T.; Sato, S. [Tekken Corp., Tokyo (Japan)

1997-05-30

This paper describes the construction of Daiichi Tamagawa Bridge for JR Tazawako Line, which was reconstructed with the Akita Shinkansen Project apart from the existing line. This bridge is a three-span continuous PC cable stayed bridge. To avoid operation accidents due to snow and ice, independent two-column type with a height of 11 m without beam was employed for the main tower. For the construction of upper part, overhang election construction method was adopted, which can be applied all the year round. The main girder has a single box cross section, and a width of 5.5 m and a beam height of 2.3 m. This was also constructed by the overhang construction method. To reduce the construction period, the main tower was constructed by the precast block construction method. The whole bridge was divided into six blocks by considering the hoist performance of cranes. Reinforcement against bearing pressure and cleavage due to the cable tensile force was conducted by adopting saddle structure for the main tower. Oblique members were jointed with the main girder using lateral beams projected from lateral side of girder. Totally seven PC cables were used for each oblique member. Measurements and management during the overhang construction were also described. The construction was over without problems in August, 1996. This bridge is under test operation using test run vehicles. 2 refs., 20 figs., 7 tabs.

A superconducting short period undulator for a harmonic generation FEL experiment

International Nuclear Information System (INIS)

Ingold, G.; Solomon, L.; Ben-Zvi, I.; Krinsky, S.; Li, D.; Lynch, D.; Sheehan, J.; Woodle, M.; Qiu, X.Z.; Yu, L.H.

1993-01-01

A three stage superconducting (SC) undulator for a high gain harmonic generation (HGE) FEL experiment in the infrared is under construction at the NSLS in collaboration with Grumman Corporation. A novel undulator technology suitable for short period (6-40mm) undulators will be employed for all three stages, the modulator, the dispersive section and the radiator. The undulator triples the frequency of a 10.4μm CO 2 seed laser. So far a 27 period (one third of the final radiator) prototype radiator has been designed, built and tested

Research on goal-setting method of rock drivage based on the balance among period, cost and quality

Institute of Scientific and Technical Information of China (English)

SHAN Ren-liang; CAI Wei-ling; WANG Yu-bao; LI Dong-gang; CHEN Xiang

2012-01-01

On the basis of the analysis on the disadvantages of the original goal-serting about rock drivage,this paper defined the "life cycle quality".With project management theory and the Cobb-Douglas finction,"quality-cost and quality-price curve model" and the "total cost-period prediction model" were built.Then the goal-setting method of the balance among quality,cost and period of rock drivage was constructed by finding "life cycle cost" through "life cycle quality" using "quality-cost andquality-price curve model" and ensuring period through "life cycle cost" using "total cost-period prediction model" (hereinafter referred to as the "three goals balance method")."Value contribution" which is the value of the contribution to a mine because of rock drivage,was found in the process of constructing the "quality-cost and quality-price curve model".An industrial test was done in coal mine A with the research results,staff footage efficiency improved by 24.24％,the period shortened by 14.3％,the "life cycle cost" dropped by 2.09％,the "life cycle quality price" improved by 3.29％,and value contribution increased by 25.3％.The result shows that the new goal method setting on the basis of coal mine profit maximization can ensure construction period.At the same time,it can realize cost and quality objectives and the optimization and balance of relationship among them; rewarding excavation teams by "value contribution" can combine organizational goal with personal goal,it significantly raise the employee's work efficiency.

Biotic development comparisons of a wetland constructed to treat mine water drainage with a natural wetland system

International Nuclear Information System (INIS)

Webster, H.J.; Hummer, J.W.; Lacki, M.J.

1994-01-01

Using 5-yr of baseline data from a constructed wetland, the authors compared the biotic changes in this wetland to conditions in a natural wetland to determine if biotic development patterns were similar. The constructed wetland was built in 1985 to treat a coal mine discharge and was planted with broadleaf cattail (Typha latifolia) within the three-cell, 0.26 ha wetland. Species richness in permanent quadrants of the constructed wetland declined over the study period, while cattail coverage increased. Plant species composition diversified at the edges, with several species becoming established. The constructed wetland deepened and expanded slightly in area coverage during the study period. The constructed wetland supported herptofaunal communities that appeared more stable through time than those of the natural wetland and sustained a rudimentary food chain dependent upon autotrophic algal populations. Despite fundamental differences in substrate base, morphology, and water flow patterns, biotic trends for the constructed wetland coincided with succession-like patterns at the natural wetland. They suggest that further shifts in the biotic composition of the constructed wetland are likely, but the system should continue to persist if primary production meets or exceeds the microbial metabolic requirements necessary to treat mine drainage

THE McDONALD OBSERVATORY PLANET SEARCH: NEW LONG-PERIOD GIANT PLANETS AND TWO INTERACTING JUPITERS IN THE HD 155358 SYSTEM

International Nuclear Information System (INIS)

Robertson, Paul; Endl, Michael; Cochran, William D.; MacQueen, Phillip J.; Brugamyer, Erik J.; Barnes, Stuart I.; Caldwell, Caroline; Wittenmyer, Robert A.; Horner, J.; Simon, Attila E.

2012-01-01

We present high-precision radial velocity (RV) observations of four solar-type (F7-G5) stars—HD 79498, HD 155358, HD 197037, and HD 220773—taken as part of the McDonald Observatory Planet Search Program. For each of these stars, we see evidence of Keplerian motion caused by the presence of one or more gas giant planets in long-period orbits. We derive orbital parameters for each system and note the properties (composition, activity, etc.) of the host stars. While we have previously announced the two-gas-giant HD 155358 system, we now report a shorter period for planet c. This new period is consistent with the planets being trapped in mutual 2:1 mean-motion resonance. We therefore perform an in-depth stability analysis, placing additional constraints on the orbital parameters of the planets. These results demonstrate the excellent long-term RV stability of the spectrometers on both the Harlan J. Smith 2.7 m telescope and the Hobby-Eberly telescope.

Analytical Structuring of Periodic and Regular Cascading Solutions in Self-Pulsing Lasers

Directory of Open Access Journals (Sweden)

Belkacem Meziane

2008-01-01

Full Text Available A newly proposed strong harmonic-expansion method is applied to the laser-Lorenz equations to analytically construct a few typical solutions, including the first few expansions of the well-known period-doubling cascade that characterizes the system in its self-pulsing regime of operation. These solutions are shown to evolve in accordance with the driving frequency of the permanent solution that we recently reported to illustrate the system. The procedure amounts to analytically construct the signal Fourier transform by applying an iterative algorithm that reconstitutes the first few terms of its development.

Exploring delay causes of road construction projects in

Directory of Open Access Journals (Sweden)

Remon F. Aziz

2016-06-01

Full Text Available Construction delays are a common phenomenon in civil engineering projects in Egypt including road construction projects. Therefore, it is essential to study and analyze causes of road construction delays. This paper studied a list of construction delay causes gathered from literature having different types of construction, different countries, different periods and different numbers of delay causes and delay groups. A questionnaire and personal interviews have formed the basis of this paper listing 293 delay causes. The questionnaire survey was distributed to 500 construction participants and 389 were received who represent consultants, contractors and site/design engineers excluding the owner representing the government in road projects as one party only. Relative Importance Index (RII is calculated and according to the highest values the top twenty and the least twenty delay causes of construction projects in Egypt are determined. A case study is analyzed and compared to the most important delay causes in the paper. The test results reveal good correlation of causes and groups between contractors and site/design engineers and between consultants and site design engineers and a somewhat low correlation between contractors and consultants. So there are no root causes that can be taking for granted to be most or least effective delay causes. Proposed model for predicting actual road construction project duration was developed; a real case study tested the accuracy of proposed model. According to the analysis of case study, the most contributing causes and groups to delays were discussed, and some future recommendations were proposed in order to control and minimize delays in road construction projects. These findings can be helpful for project managers to mitigate the road construction delays in Egypt. In order to effectively overcome the road construction delays in developing countries, suggestions are made for fundamental and large�

Unit soil loss rate from various construction sites during a storm.

Science.gov (United States)

Maniquiz, Marla C; Lee, Soyoung; Lee, Eunju; Kong, Dong-Soo; Kim, Lee-Hyung

2009-01-01

The Korean Ministry of Environment (MOE) opts to establish an ordinance having a standard specifying an allowable soil loss rate applicable to construction projects. The predicted amount of soil loss from a construction site exceeding the standard can be used to calculate the percent reduction necessary to comply with the ordinance. This research was conducted to provide a basis to establish a standard by investigating the unit soil loss rates in the three phases of development: pre-construction, active construction and post construction based from 1,036 Environmental Impact Assessment (EIA) reports within the six-year period (2000-2005). Based on the findings, several factors affect the magnitude of soil loss rates particularly storm characteristics, site slope, soil type, location from rivers, as well as the type of construction activity. In general, the unit soil loss rates during the active construction phase are extremely higher in comparison to undisturbed areas; in magnitude of 7 to 80 times larger in urban areas and 18 to 585 times in rural areas. Only between 20 to 40 percent of the soil loss rates was contributed at pre- and post- construction phases indicating that the active construction phase is the most important phase to control.

Problems and prospects of nuclear power plants construction

Directory of Open Access Journals (Sweden)

Pergamenshhik Boris Klimentyevich

2014-02-01

Full Text Available 60 years ago, in July 1954 in the city of Obninsk near Moscow the world's first nuclear power plant was commissioned with a capacity of 5 MW. Today more than 430 nuclear units with a total capacity of almost 375000 MW are in operation in dozens of the countries worldwide. 72 electrical power units are currently under construction, 8 of them are located in the Russian Federation. There will be no alternative to nuclear energy in the coming decades. Among the factors contributing to the construction of nuclear power plants reckon limited fossil fuel supply, lack of air and primarily carbon dioxide emissions. The holding back factors are breakdown, hazard, radioactive wastes, high construction costs and long construction period. Nuclear accidents in the power plant of «Three-Mile-Island» in the USA, in Chernobyl and in Japan have resulted in termination of construction projects and closure of several nuclear power plants in the Western Europe. The safety systems have become more complex, material consumption and construction costs have significantly increased. The success of modern competing projects like EPR-1600, AP1000, ABWR, national ones AES-2006 and VVER-TOI, as well as several others, depends not only on structural and configuration but also on construction and technological solutions. The increase of the construction term by one year leads to growth of estimated total costs by 3—10 %. The main improvement potentials include external plate reinforcement, pre-fabricated large-block assembly, production and installation of the equipment packages and other. One of the crucial success factors is highly skilled civil engineers training.

Polar cap contraction and expansion during a period of substorms

Science.gov (United States)

Aikio, Anita; Pitkänen, Timo; Honkonen, Ilja; Palmroth, Minna; Amm, Olaf

We have studied the variations in the polar cap area and related parameters during a period of four substorms on February 18, 2004, following an extended quiet period. The measurements were obtained by the EISCAT incoherent scatter radars, MIRACLE magnetometers, Geotail and solar wind satellites. In addition, the event is modeled by the GUMICS-4 MHD simulation. By using the measured and modeled data, the dayside and nightside reconnection voltages are calculated. The results show a good general agreement in the polar cap boundary (PCB) location as estimated by the EISCAT radars and the GUMICS simulation. Deviations are found, too, like shorter durations of expansion phases in the simulation. Geotail measurements of the inclination angle of the magnetic field in the tail (Xgsm= -22 Re) agree with the PCB latitude variations measured by EISCAT at a different MLT. We conclude that a large polar cap corresponds to a stretched tail configuration in the near-Earth tail and a small polar cap to a more dipolar configuration. The substorm onsets took place during southward IMF. A specific feature is that the substorm expansion phases were not associated with significant contractions of the polar cap. Even though nightside reconnection voltages started to increase during expansion phases, maximum closure of open flux took place in the recovery phases. We shortly discuss implications of the observation to the definition of the recovery phase.

Construction of the Database for Pulsating Variable Stars

Science.gov (United States)

Chen, Bing-Qiu; Yang, Ming; Jiang, Bi-Wei

2012-01-01

A database for pulsating variable stars is constructed to favor the study of variable stars in China. The database includes about 230,000 variable stars in the Galactic bulge, LMC and SMC observed in an about 10 yr period by the MACHO(MAssive Compact Halo Objects) and OGLE(Optical Gravitational Lensing Experiment) projects. The software used for the construction is LAMP, i.e., Linux+Apache+MySQL+PHP. A web page is provided for searching the photometric data and light curves in the database through the right ascension and declination of an object. Because of the flexibility of this database, more up-to-date data of variable stars can be incorporated into the database conveniently.

Safety evaluation methodology of engineering barriers at repository for low and intermediate level radioactive waste

International Nuclear Information System (INIS)

Zarnic, R.; Bokan Bosiljkov, V.; Giacomelli, M.

2007-01-01

Analyses of the roles of cement-based barriers in radioactive waste isolation show that models used to estimate their characteristics during the lifetime of the repository must consider the alteration of material properties with time due to degradation processes. Reinforced concrete barriers at repositories shall be designed in such manner that they fulfil besides isolative capabilities also the required functions of mechanical resistance and stability. Key elements of safety evaluation are mainly the correct selection of materials for mineral composites with cement binder (cements, aggregates, mineral additives and chemical admixtures) and their design, execution of construction works and production of precast concrete containers (continuous casting of concrete - no cold joints, limited number of construction joints, proper placing and consolidation, finishing and curing), strict control of used materials and inspection of works, as well as investigation after the construction (visual inspection, non-destructive testing, monitoring, ageing assessment on test containers). According to the methodology presented in this paper the lifetime of the repository can be estimated and, if shorter than 300 years or shorter than the period resulting from safety analysis, appropriate corrective measures shall be taken. (author)

A large outbreak of Listeria monocytogenes infection with short incubation period in a tertiary care hospital.

Science.gov (United States)

Johnsen, Bjørn Odd; Lingaas, Egil; Torfoss, Dag; Strøm, Erik H; Nordøy, Ingvild

2010-12-01

Listeria monocytogenes is a foodborne pathogen with a high mortality rate. We report a large, nosocomial outbreak of Listeria monocytogenes infection. Patients with L. monocytogenes isolated from a sterile site, or from faeces when diarrhoea and fever were present, were included. Clinical data were collected from the patient records. The incubation period was calculated as the time between exposure and start of symptoms. Seventeen patients (11 women, median age 64 years) were infected of whom 15 patients were at increased risk for listeriosis. Eleven patients received empiric antibiotic treatment, eight of them with cephalosporins. Three patients died with a resulting mortality rate of 18%. The source of the outbreak was a Camembert cheese made from pasteurised milk containing up to 360 million colony forming units per portion. The median incubation period was 3-4 days. The incubation period in this outbreak was significantly shorter than previously reported, a fact that may be due to the high number of ingested bacteria. Furthermore, food restrictions in hospitals seem warranted, as do treatment with antibiotics effective against L. monocytogenes in at-risk populations. Copyright © 2010 The British Infection Association. Published by Elsevier Ltd. All rights reserved.

Effect of a dam on epilithic algal communities of a mountain stream: before-after dam construction comparison

Directory of Open Access Journals (Sweden)

Luciana Cibils Martina

2013-02-01

Full Text Available In this study we evaluated the effect of a dam on epilithic algal communities by analyzing community response after dam construction and by comparing community composition, structure and biomass upstream and downstream of the dam. Samples of epilithic algae and environmental data were collected at each site during high and low water periods before and after dam construction in Achiras Stream (Córdoba, Argentina. Ordinations showed modifications in algal assemblages after dam construction and downstream of the dam. Ordinations also suggested a loss of seasonality at the downstream site since the assemblages were similar between hydrological periods after dam construction. Indicator species, obtained by the Indicator Value method, showed that, after dam construction, there could have been an increase in nutrient concentration and a release of plankton from the impoundment. Abundance, richness and diversity were altered after dam construction as assessed by ANOVAs derived from a modified BACI Design. Proportion of early-successional species was higher at the upstream site while late-successional species were dominant at the downstream site, as predicted. Lower fluctuations in discharge downstream of the dam may have helped succession advance, whereas at the upstream site, mainly during the high water period, floods could have caused sloughing of life forms from the outer layers of the biofilm, resetting the algal community to early successional stages. It may be concluded that the dam affected algal community and favored succession advance mainly by reducing current velocity and flow fluctuations.

Sleep-induced periodic breathing and apnea: a theoretical study.

Science.gov (United States)

Khoo, M C; Gottschalk, A; Pack, A I

1991-05-01

To elucidate the mechanisms that lead to sleep-disordered breathing, we have developed a mathematical model that allows for dynamic interactions among the chemical control of respiration, changes in sleep-waking state, and changes in upper airway patency. The increase in steady-state arterial PCO2 accompanying sleep is shown to be inversely related to the ventilatory response to CO2. Chemical control of respiration becomes less stable during the light stage of sleep, despite a reduction in chemoresponsiveness, due to a concomitant increase in "plant gain" (i.e., responsiveness of blood gases to ventilatory changes). The withdrawal of the "wakefulness drive" during sleep onset represents a strong perturbation to respiratory control: higher magnitudes and rates of withdrawal of this drive favor instability. These results may account for the higher incidence of periodic breathing observed during light sleep and sleep onset. Periodic ventilation can also result from repetitive alternations between sleep onset and arousal. The potential for instability is further compounded if the possibility of upper airway occlusion is also included. In systems with high controller gains, instability is mediated primarily through chemoreflex overcompensation. However, in systems with depressed chemoresponsiveness, rapid sleep onset and large blood gas fluctuations trigger repetitive episodes of arousal and hyperpnea alternating with apneas that may or may not be obstructive. Between these extremes, more complex patterns can arise from the interaction between chemoreflex-mediated oscillations of shorter-cycle-duration (approximately 36 s) and longer-wavelength (approximately 60-80 s) state-driven oscillations.

Evolution of the constructive adobe system in the Porcelain Industrial Unit of Vista Alegre (1937-1945

Directory of Open Access Journals (Sweden)

Alice Ruano

2010-01-01

Full Text Available The urban nucleus of the Porcelain Factory of Vista Alegre reveals a special interest in terms of the evolution of the traditional adobe construction in the town of Ílhavo, located in the district of Aveiro. Presenting a structured philosophy of intervention in the territory since its very beginning, it possesses a rich heritage in the field of construction and architecture. The measures planned and implemented in the second phase of Vista Alegre growth reporting its beginning to the ends of the 30's, and along the 40's, confirm it both in the rehabilitation, extension and new constructions in adobe masonry. Those measures were implemented during the structural changes of the Industrial Unit administration that only until this period belonged to the family of its founder. These changes creates one of the focus of innovation in the region, with new construction strategies and solutions in adobe buildings, which will prolonged the period of use of this construction system, noticeable in buildings dated of 1958 in the Vista Alegre and at least in 1970 in the town.

Influence of composition of feed and lactation period on mineral composition of Mare's

Directory of Open Access Journals (Sweden)

Miroslav Fišera

2018-03-01

Full Text Available Normal 0 21 false false false CS X-NONE X-NONE Effects of lactation period and feed on essential minerals composition of mare's milk were studied. Average Ca, P, Na and Mg concentrations in feed DM were 0.66, 4.30, 0.13 and 2.21 g.kg-1 of DM (dry matter, respectively. In regard to milk all elements concentrations were not similar to each other due to the changes of the lactation day differences. Average Ca, P, Na and Mg concentrations (in DM caused by breed differences and lactation days were 1.95, 1.08, 0.53 and 0.22 g.kg-1, respectively. During the milk period, a high-quality feed were maintaining the major mineral composition of mare's milk in 1.5 - 2 times higher amount than milk of mare fed with pasture and a low-quality feed. The colostrum stage of mare was much shorter than other animals, the mare's milk on the 2nd day of lactation showed properties of initial milk in which its composition, particularly in minerals, were two times higher when compare to that on milk periods that was started from 5th day after parturition. It seemed that some factors, except well physiological conditions, such as mare's age, number of foaling, sex of foal etc. did not affect milk nutrient composition.

Accident patterns for construction-related workers: a cluster analysis

Science.gov (United States)

Liao, Chia-Wen; Tyan, Yaw-Yauan

2012-01-01

The construction industry has been identified as one of the most hazardous industries. The risk of constructionrelated workers is far greater than that in a manufacturing based industry. However, some steps can be taken to reduce worker risk through effective injury prevention strategies. In this article, k-means clustering methodology is employed in specifying the factors related to different worker types and in identifying the patterns of industrial occupational accidents. Accident reports during the period 1998 to 2008 are extracted from case reports of the Northern Region Inspection Office of the Council of Labor Affairs of Taiwan. The results show that the cluster analysis can indicate some patterns of occupational injuries in the construction industry. Inspection plans should be proposed according to the type of construction-related workers. The findings provide a direction for more effective inspection strategies and injury prevention programs.

The Psychological Essence of the Child Prodigy Phenomenon: Sensitive Periods and Cognitive Experience.

Science.gov (United States)

Shavinina, Larisa V.

1999-01-01

Examination of the child prodigy phenomenon suggests it is a result of extremely accelerated mental development during sensitive periods that leads to the rapid growth of a child's cognitive resources and their construction into specific exceptional achievements. (Author/DB)

Imagining the future: evidence for a hippocampal contribution to constructive processing.

Science.gov (United States)

Gaesser, Brendan; Spreng, R Nathan; McLelland, Victoria C; Addis, Donna Rose; Schacter, Daniel L

2013-12-01

Imagining future events and remembering past events rely on a common core network, but several regions within this network--including the hippocampus--show increased activity for imagining future events compared to remembering past events. It remains unclear whether this hippocampal activity reflects processes related to the demands of constructing details retrieved across disparate episodic memories into coherent imaginary events, encoding these events into memory, novelty detection, or some combination of these processes. We manipulated the degree of constructive processing by comparing activity associated with the initial construction of an imagined scenario with the re-construction of an imagined scenario (imagine vs. re-imagine). After accounting for effects of novelty and subsequent memory, we found that a region in the hippocampus was preferentially activated for newly constructed imagined events compared with re-imagined events. Our results suggest that the hippocampus may support several distinct but related processes that are critical for imagining future events, and they also indicate that a particular region within posterior hippocampus may uniquely contribute to the construction of imagined future events. Copyright © 2013 Wiley Periodicals, Inc.

The construction of solid waste form test facility

International Nuclear Information System (INIS)

Park, Hun Hwee; Kim, Joon Hyung; Lee, Byung Jik; Koo, Jun Mo; Kim, Jeong Guk; Jung, In Ha

1990-03-01

The solid waste form test facility (SWFTF) to test and/or evaluate the characteristics of waste forms, such as homogeniety, mechanical properties, thermal properties, waste resistance and leachability, have been constructed, and some equipments for testing actual waste forms has been purchased; radiocative monitoring system, glove box for the manipulator repair room, and uninteruppted power supply system, et al. Classifications of radioactive wastes, basic requirements and criteria to be considered during waste management were also reviewed. Some of the described items above have been standardized for the purpose of indigenigation. Therefore, safety assurance of waste forms, as well as increase in the range of participating of domestic companies in construction of further nuclear facilities could be obtained as results through constructing this facility. In the furture this facility is going to be utilized not only for the inspection of waste forms but also for the periodic decontamination for extending the life time of some expensive radiological equipments using remote handling techniques. (author)

Construction history and construction management

International Nuclear Information System (INIS)

Agh, S.

1999-01-01

The process of pre-design and design preparation of the Mochovce NPP as well as the construction history of the plant is highlighted, including the financing aspect and problems arising from changes in the technological and other conditions of start-up of the reactor units. The results of international audits performed to improve the level of nuclear safety and implementation of the measures suggested are also described. The milestones of the whole construction process and start-up process, the control and quality system, and the methods of control and management of the complex construction project are outlined. (author)

Model of tunnelling through periodic array of quantum dots

Directory of Open Access Journals (Sweden)

Meynster Dmitry

2017-01-01

Full Text Available Several explicitly solvable models of electron tunnelling in a system of single and double two-dimensional periodic arrays of quantum dots with two laterally coupled leads in a homogeneous magnetic field are constructed. First, a model of single layer formed by periodic array of zero-range potentials is described. The Landau operator (the Schrodinger operator with a magnetic field with point-like interactions is the system Hamiltonian. We deal with two types of the layer lattices: square and honeycomb. The periodicity condition gives one an invariance property for the Hamiltonian in respect to magnetic translations group. The consideration of double quantum layer reduces to the replacement of the basic cell for the single layer by a cell including centers of different layers. Two variants of themodel for the double layer are suggested: with direct tunneling between the layers and with the connecting channels (segments in the model between the layers. The theory of self-adjoint extensions of symmetric operators is a mathematical background of the model. The third stage of the construction is the description of leads connection. It is made by the operator extensions theory method too. Electron tunneling from input lead to the output lead through the double quantum layer is described. Energy ranges with extremely small (practically, zero transmission were found. Dependencies of the transmission coefficient (particularly, “zero transmission bands” positions on the magnetic field, the energy of electron and the distance between layers are investigated. The results are compared with the corresponding single-layer transmission.

A Kinetic Model Explains Why Shorter and Less Affine Enzyme-recruiting Oligonucleotides Can Be More Potent

Directory of Open Access Journals (Sweden)

Lykke Pedersen

2014-01-01

Full Text Available Antisense oligonucleotides complementary to RNA targets promise generality and ease of drug design. The first systemically administered antisense drug was recently approved for treatment and others are in clinical development. Chemical modifications that increase the hybridization affinity of oligonucleotides are reasoned to confer higher potency, i.e., modified oligonucleotides can be dosed at lower concentrations to achieve the same effect. Surprisingly, shorter and less affine oligonucleotides sometimes display increased potency. To explain this apparent contradiction, increased uptake or decreased propensity to form structures have been suggested as possible mechanisms. Here, we provide an alternative explanation that invokes only the kinetics behind oligonucleotide-mediated cleavage of RNA targets. A model based on the law of mass action predicts, and experiments support, the existence of an optimal binding affinity. Exaggerated affinity, and not length per se, is detrimental to potency. This finding clarifies how to optimally apply high-affinity modifications in the discovery of potent antisense oligonucleotide drugs.

Effects of shorter versus longer storage time of transfused red blood cells in adult ICU patients

DEFF Research Database (Denmark)

Rygård, Sofie L; Jonsson, Andreas B; Madsen, Martin B

2018-01-01

on the effects of shorter versus longer storage time of transfused RBCs on outcomes in ICU patients. METHODS: We conducted a systematic review with meta-analyses and trial sequential analyses (TSA) of randomised clinical trials including adult ICU patients transfused with fresher versus older or standard issue...... blood. RESULTS: We included seven trials with a total of 18,283 randomised ICU patients; two trials of 7504 patients were judged to have low risk of bias. We observed no effects of fresher versus older blood on death (relative risk 1.04, 95% confidence interval (CI) 0.97-1.11; 7349 patients; TSA......-adjusted CI 0.93-1.15), adverse events (1.26, 0.76-2.09; 7332 patients; TSA-adjusted CI 0.16-9.87) or post-transfusion infections (1.07, 0.96-1.20; 7332 patients; TSA-adjusted CI 0.90-1.27). The results were unchanged by including trials with high risk of bias. TSA confirmed the results and the required...

Constructing Aligned Assessments Using Automated Test Construction

Science.gov (United States)

Porter, Andrew; Polikoff, Morgan S.; Barghaus, Katherine M.; Yang, Rui

2013-01-01

We describe an innovative automated test construction algorithm for building aligned achievement tests. By incorporating the algorithm into the test construction process, along with other test construction procedures for building reliable and unbiased assessments, the result is much more valid tests than result from current test construction…

About a fuel for burnup reactor of periodical pulsed nuclear pumped laser

International Nuclear Information System (INIS)

Volkov, A.I.; Lukin, A.V.; Magda, L.E.; Magda, E.P.; Pogrebov, I.S.; Putnikov, I.S.; Khmelnitsky, D.V.; Scherbakov, A.P.

1998-01-01

A physical scheme of burnup reactor for a Periodic Pulsed Nuclear Pumped Laser was supposed. Calculations of its neutron physical parameters were made. The general layout and construction of basic elements of the reactor are discussed. The requirements for the fuel and fuel elements are established. (author)

The impact of asbestos exposure in Swedish construction workers.

Science.gov (United States)

Järvholm, Bengt; Englund, Anders

2014-01-01

To study the occurrence of pleural mesothelioma as a measure of the impact on health from asbestos exposure in the construction industry. The occurrence of pleural mesothelioma in different occupations, time periods and birth cohorts was studied in a cohort of construction workers. They were prospectively followed after they had participated in health examinations between 1971 and 1993. The analysis was restricted to men and in total 367,568 men was included in the analysis. In total there were 419 cases of pleural mesotheliomas between 1972 and 2009. As expected the age adjusted incidence was high in insulation workers and plumbers (39 and 16 cases per 100,000 person-years, respectively). However, only 21% of the pleural mesotheliomas occurred in those occupational groups. Occupational groups with many cases of pleural mesothelioma were concrete workers (N = 56), wood workers (N = 55), painters (N = 32), electricians (N = 48), and foremen (N = 37). The highest risk was in birth cohorts born between 1935 and 1945. Between 1995 and 2009 around one-third of all male cases in the country occurred in this birth cohort. The risk seemed to decrease considerably in men born after 1955. In Sweden a considerable proportion of pleural mesotheliomas occur among construction workers; and not only in jobs traditionally associated with asbestos exposure such as insulators and plumbers but also among electricians, for example. The results shows that asbestos exposure occurs in many occupational groups, indicating that safe handling of asbestos is a very difficult or even impossible task in the construction industry. © 2013 Wiley Periodicals, Inc.

Start-up of a free water surface constructed wetland for treating olive mill wastewater

Directory of Open Access Journals (Sweden)

Michailides Michail

2015-01-01

Full Text Available An olive mill's existing evaporation pond was separated into five cells and transformed into a free water surface constructed wetland. The constructed wetland was used as a post-treatment stage for olive mill wastewater (OMW. Wastewater was previously treated by an aerobic trickling filter. The influent concentrations in the constructed wetland were 27400 mg.L-1, 4800 mg.L-1, 105 mg.L-1 and 770 mg.L-1 for COD, phenols, ortho-phosphate and TKN, respectively. Despite the rather high influent concentrations, the performance of the constructed wetland was very good since after the 60-day start-up operation period it achieved removal rates of about 94%, 95%, 95% and 98% for COD, phenols, ortho-phosphate and TKN, respectively. The major pollutant removal processes can be attributed to both biological processes occurring in the wetland and photo-oxidation. Laboratory-scale experiments with OMW from fifth cell of the wetland revealed that the net contribution of photo-oxidation after 112 hours of simulated solar radiation at 765 W/m2 (i.e. about 38 days of sunlight irradiation was 18% and 31% removal for COD and phenols, respectively. In the constructed wetland, the total removal reached 81% and 86% for COD and phenols, respectively, for the same time period (38 days.

Megadontia, striae periodicity and patterns of enamel secretion in Plio-Pleistocene fossil hominins.

Science.gov (United States)

Lacruz, Rodrigo S; Dean, M Christopher; Ramirez-Rozzi, Fernando; Bromage, Timothy G

2008-08-01

Early hominins formed large and thick-enamelled cheek-teeth within relatively short growth periods as compared with modern humans. To understand better the developmental basis of this process, we measured daily enamel increments, or cross striations, in 17 molars of Plio-Pleistocene hominins representing seven different species, including specimens attributed to early Homo. Our results show considerable variation across species, although all specimens conformed to the known pattern characterised by greater values in outer than inner enamel, and greater cuspal than cervical values. We then compared our results with the megadontia index, which represents tooth size in relation to body mass, for each species to assess the effect of daily growth rates on tooth size. Our results indicate that larger toothed (megadont) taxa display higher rates or faster forming enamel than smaller toothed hominins. By forming enamel quickly, large tooth crowns were able to develop within the constraints of shorter growth periods. Besides daily increments, many animals express long-period markings (striae of Retzius) in their enamel. We report periodicity values (number of cross striations between adjacent striae) in 14 new specimens of Australopithecus afarensis, Paranthropus aethiopicus, Paranthropus boisei, Homo habilis, Homo rudolfensis and Homo erectus, and show that long-period striae express a strong association with male and average male-female body mass. Our results for Plio-Pleistocene hominins show that the biological rhythms that give rise to long-period striae are encompassed within the range of variation known for modern humans, but show a lower mean and modal value of 7 days in australopithecines. In our sample of early Homo, mean and modal periodicity values were 8 days, and therefore similar to modern humans. These new data on daily rates of enamel formation and periodicity provide a better framework to interpret surface manifestations of internal growth markings on

Orbital stability of periodic traveling-wave solutions for the log-KdV equation

Science.gov (United States)

Natali, Fábio; Pastor, Ademir; Cristófani, Fabrício

2017-09-01

In this paper we establish the orbital stability of periodic waves related to the logarithmic Korteweg-de Vries equation. Our motivation is inspired in the recent work [3], in which the authors established the well-posedness and the linear stability of Gaussian solitary waves. By using the approach put forward recently in [20] to construct a smooth branch of periodic waves as well as to get the spectral properties of the associated linearized operator, we apply the abstract theories in [13] and [25] to deduce the orbital stability of the periodic traveling waves in the energy space.

First-line intra-arterial versus intravenous chemotherapy in unilateral sporadic group D retinoblastoma: evidence of better visual outcomes, ocular survival and shorter time to success with intra-arterial delivery from retrospective review of 20 years of treatment.

Science.gov (United States)

Munier, Francis L; Mosimann, Pascal; Puccinelli, Francesco; Gaillard, Marie-Claire; Stathopoulos, Christina; Houghton, Susan; Bergin, Ciara; Beck-Popovic, Maja

2017-08-01

The introduction of intra-arterial chemotherapy (IAC) as salvage treatment has improved the prognosis for eye conservation in group D retinoblastoma. The aim of this study was to compare the outcomes of consecutive patients with advanced unilateral disease treated with either first-line intravenous chemotherapy (IVC) or first-line IAC. This is a retrospective mono-centric comparative review of consecutive patients. Sporadic unilateral retinoblastoma group D cases treated conservatively at Jules-Gonin Eye Hospital and CHUV between 1997 and 2014. From January 1997 to August 2008, IVC, combined with focal treatments, was the primary treatment approach. From September 2008 to October 2014, IAC replaced IVC as first-line therapy. 48 patients met the inclusion criteria, receiving only either IAC or IVC as primary treatment modality. Outcomes of 23 patients treated by IVC were compared with those of 25 treated by IAC; mean follow-up was 105.3 months (range 29.2-218.6) and 41.7 months (range 19.6-89.5), respectively. Treatment duration was significantly shorter in the IAC group (pchemotherapy treatment. Despite this, the results reported here imply that eyes treated with first-line IAC will have shorter treatment period, better ocular survival and visual acuity than first-line IVC. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Stochastic response and bifurcation of periodically driven nonlinear oscillators by the generalized cell mapping method

Science.gov (United States)

Han, Qun; Xu, Wei; Sun, Jian-Qiao

2016-09-01

The stochastic response of nonlinear oscillators under periodic and Gaussian white noise excitations is studied with the generalized cell mapping based on short-time Gaussian approximation (GCM/STGA) method. The solutions of the transition probability density functions over a small fraction of the period are constructed by the STGA scheme in order to construct the GCM over one complete period. Both the transient and steady-state probability density functions (PDFs) of a smooth and discontinuous (SD) oscillator are computed to illustrate the application of the method. The accuracy of the results is verified by direct Monte Carlo simulations. The transient responses show the evolution of the PDFs from being Gaussian to non-Gaussian. The effect of a chaotic saddle on the stochastic response is also studied. The stochastic P-bifurcation in terms of the steady-state PDFs occurs with the decrease of the smoothness parameter, which corresponds to the deterministic pitchfork bifurcation.

Construction Management of Electromechanical Engineering Project in Petrochemical Construction

Directory of Open Access Journals (Sweden)

Xi Tao

2017-03-01

Full Text Available Petrochemical industry as a basic industry, occupies a pivotal position in the national economy, with the continuous development of science and technology, electromechanical automation in the petrochemical industry has been widely used to save a lot of labor but also greatly improve the oil Chemical industry production efficiency. Therefore, in the construction of petrochemical industry, mechanical and electrical engineering as part of it. It plays a vital role. Petrochemical industry with the production of high temperature and high pressure and flammable and explosive gas, can strengthen the construction of mechanical and electrical engineering specialization and construction management of scientific, has become the relationship between the smooth development of mechanical and electrical engineering and engineering quality of the key, A direct impact on the petrochemical construction of the overall construction quality. To this end, it is necessary for the construction of petrochemical construction of electromechanical engineering construction management to promote the construction of mechanical and electrical engineering management level gradually increased. This article on the machine Electric engineering project construction management were discussed with a view to the petrochemical construction in the relevant aspects of the need to provide reference for reference.

Looking back on safety management in construction of advanced thermal nuclear power plant 'Fugen'

International Nuclear Information System (INIS)

Emori, Kengo

1979-01-01

The safety management of the advanced thermal nuclear power plant ''Fugen'' during the period from the preparation of plant construction in October, 1970, to the full power operation in March, 1979, is looked back and explained. Any large human and material accidents did not occur during the long construction time. The total numbers of persons and hours were 1.397 x 10 6 workers and 11.55 x 10 6 hours, respectively. The number of labor accidents was twenty with no dead person, the number of loss days was 645 days, the number of accident rate was 1.73, the intensity rate was 0.06, and the mean rate of labor accidents per year per 1000 workers was 6.4. The radiation exposure dose was 65.27 man-rem for the managed 1804 workers in total, during the testing and operating periods. These data show that the safety management for ''Fugen'' is very excellent, considering the following special features: 1) there were many works which were carried out for the first time, 2) the construction of the plant was conducted by five contractors taking partial charge, there were many kinds of construction works, the construction and testing periods were long, and the workers had to go to the site from Tsuruga city by car and bus. The organization of preventing disasters, the concrete implementation items for safety management, including the planning of activities, various meetings, patrol, education and training, the honoring system, the prevention of traffic accident and so on, and the results of actual safety management are explained with the reflection. (Nakai, Y.)

Research on construction quality and improvement of assembly construction

Science.gov (United States)

Cheng, Fei

2017-11-01

Based on the acceleration of the urbanization process and the improvement of the quality of life of our residents, the demand for building construction has been increasing. In this context, the construction industry in order to promote the construction efficiency, quality improvement, to meet the needs of the development of the times to strengthen the new technology, the use of new technologies. At present, China’s engineering construction units in the process of carrying out the project to strengthen the use of assembly-type construction technology, which thus achieved for the traditional construction work low-level, high time-consuming issues, and promote the steady improvement of production efficiency. Based on this, this paper focuses on the analysis of the connotation of the assembly structure and analyzes the quality problems in the construction process of the construction projects and puts forward the improvement measures to promote the improvement of the building quality and the construction of the building Construction speed. Based on this, this paper analyzes the structural system and design of prefabricated building.

Measurements of the radioactivity of power plant by-products processed into construction materials

International Nuclear Information System (INIS)

Marcinkowski, S.A.; Dudelewski, H.A.

1992-01-01

The subject of the recycling of residual products comprising, inter alia, fly ash and slags accuring from the combustion of black and brown coal in modern coal dust boilers in the power industry has been topical for a number of years. Numerous discussions and articles in technical periodicals and the daily press have revolved around the problem of the radioactivity of construction materials or construction elements obtained from fly ash or slags of power plant. In Poland, this was a forbidden subject until the publication in 1980 by the Warsaw institute of construction technology of standard no. 234 entitled: 'Recommendations for establishing the natural radioactivity of products processed into construction materials'. (orig.) [de

Long-period noise source inversion in a 3-D heterogeneous Earth

Science.gov (United States)

Sager, K.; Ermert, L. A.; Afanasiev, M.; Boehm, C.; Fichtner, A.

2017-12-01

We have implemented a new method for ambient noise source inversion that fully honors finite-frequency wave propagation and 3-D heterogeneous Earth structure.Here, we present results of its first application to the Earth's long-period background signal, the hum, in a period band of around 120 - 300 s. In addition to being a computationally convenient test case, the hum is also the topic of ongoing research in its own right, because different physical mechanisms have been proposed for its excitation. The broad patterns of this model for South and North hemisphere winter are qualitatively consistent with previous long-term studies of the hum sources; however, thanks to methodological improvements, the iterative refinement, and the use of a comparatively extensive dataset, we retrieve a more detailed model in certain locations. In particular, our results support findings that the dominant hum sources are focused along coasts and shelf areas, particularly in the North hemisphere winter, with a possible though not well-constrained contribution of pelagic sources. Additionally, our findings indicate that hum source locations in the ocean, tentatively linked to locally high bathymetry, are important contributors particularly during South hemisphere winter. These results, in conjunction with synthetic recovery tests and observed cross-correlation waveforms, suggest that hum sources are rather narrowly concentrated in space, with length scales on the order of few hundred kilometers. Future work includes the extension of the model to spring and fall season and to shorter periods, as well as its use in full-waveform ambient noise inversion for 3-D Earth structure.

[Claw size of Scottish Highland Cows after pasture and housing periods].

Science.gov (United States)

Nuss, K; Kolp, E; Braun, U; Weidmann, E; Hässig, M

2014-09-01

The claws of pastured Scottish Highland Cattle are large and this may raise the question if regular claw trimming is necessary. Therefore, the claws of the right thoracic and pelvic limbs were measured in 22 Scottish Highland cows 4 times 8 weeks apart. The cows were kept on various alpine pastures before the first measurement, on a two-hectare low-land pasture before the second measurement, in a welfare-compliant straw-bedded free stall before the third measurement and on alpine pasture before the fourth measurement. Housing conditions significantly affected claw dimensions. The claws were composed of dry, hard horn during pasture periods, and had prominent weight-bearing hoof-wall borders and soles with a natural axial slope. Long dorsal walls and heels and a greater symmetry were common. Claw lesions were absent. In contrast, free-stall housing was associated with shorter toes and steeper toe angles, but white line deterioration, heel horn erosion, wearing of the axial slope and hoof wall edges were common.

The influence of management and construction methods in the repair costs of Spain’s low-volume road network

Directory of Open Access Journals (Sweden)

Eutiquio Gallego

2016-06-01

Full Text Available This paper describes the entire process of the implementation of the Spanish low volume road network, including the design criteria, the construction techniques and the management policies during all the periods. The current situation of low volume roads in Spain was analyzed with respect to the legal framework and their actual condition. In addition, the budget required for the repair of 41 low volume roads throughout Spain was calculated in order to statistically analyze the influence of the pavement materials and the period of construction. The main conclusions were that low volume roads constructed during the 1970´s are currently those in the best state of repair and those requiring the lower repair costs, even lower than those constructed after 1980´s. In addition, low volume roads constructed with higher quality materials and using standardized techniques required five times lower repair costs than those made of lower quality materials.

RADIO FLARING FROM THE T6 DWARF WISEPC J112254.73+255021.5 WITH A POSSIBLE ULTRA-SHORT PERIODICITY

Energy Technology Data Exchange (ETDEWEB)

Route, Matthew; Wolszczan, Alexander, E-mail: mroute@purdue.edu, E-mail: alex@astro.psu.edu [Department of Astronomy and Astrophysics, the Pennsylvania State University, 525 Davey Laboratory, University Park, PA 16802 (United States)

2016-04-20

We present new results from a continuing 5 GHz search for flaring radio emission from a sample of L and T brown dwarfs, conducted with the 305 m Arecibo radio telescope. In addition to the previously reported flaring from the T6.5 dwarf 2MASS J10475385+212423, we have detected and confirmed circularly polarized flares from another T6 dwarf, WISEPC J112254.73+255021.5. Although the flares are sporadic, they appear to occur at a stable period of 0.288 hr. Given the current constraints, periods equal to its second and third subharmonic cannot be ruled out. The stability of this period over the eight-month timespan of observations indicates that, if real, it likely reflects the star’s rapid rotation. If confirmed, any of the three inferred periodicities would be much shorter than the shortest, 1.41 hr, rotation period of a brown dwarf measured so far. This finding would place a new observational constraint on the angular momentum evolution and rotational stability of substellar objects. The detection of radio emission from the sixth ∼1000 K dwarf further demonstrates that the coolest brown dwarfs and, possibly, young giant planets, can be efficiently investigated using radio observations at centimeter wavelengths as a tool.

Construction of prototype of on-line analyzer detection system for coal on belt conveyor using neutron activation technique

International Nuclear Information System (INIS)

Rony Djokorayono; Agus Cahyono; MP Indarzah; SG Usep; Sukandar

2015-01-01

The use of on-line neutron activation technique for coal analysis is proposed as an alternative method for analysis based on sampling technique. Compared to this conventional technique, the on-line neutron activation technique has much shorter time of analysis and more accurate results. The construction of detection system prototype for the on-line analyzer is described in this paper. This on-line analyzer consists of detection system, data acquisition system, and computer console. This detection system comprises several modules, i.e. NaI(Tl) scintillation detector completed with a photomultiplier tube (PMT), pre-amplifier, single channel analyzer (SCA), and analog signal transmitter and pulse counter processor. The construction processes of these four modules include the development of configuration block, lay out, and selection of electronic components. The modules have been integrated and tested. This detection system was tested using radioactive element Zn-65 having energy of 1115.5 keV and activity of 1 μCi. The test results show that the prototype of the on-line analyzer detection system has functioned as expected. (author)

SHORTER, Aylward. African recruits and missionary conscripts: the White Fathers and the Great War (1914 – 1922. London: Missionaries of Africa History Project, 2007. 270 p. ISBN: 9780955523502

Directory of Open Access Journals (Sweden)

Jefferson Olivatto da Silva

2011-09-01

Full Text Available Resenha do livroSHORTER, Aylward. African recruits and missionary conscripts: the White Fathers and the Great War (1914 – 1922. London: Missionaries of Africa History Project, 2007. 270 p. ISBN: 9780955523502

Host-Country Related Risk Factors in International Construction: Meta-Analysis

Directory of Open Access Journals (Sweden)

Güzin AYDOGAN

2014-09-01

Full Text Available Internationalization has been on the agenda of construction firms as a strategic option in global competition. Due to globalization every sector including the construction industry has faced with high levels of competitiveness, uncertainty, and risk. International construction involves common risks to domestic construction, as well as risks that are related to the host country. These risks have serious effects on the performance of international projects. Since the sustainable competitiveness of international contractors depends largely on the effective management of these risks, their assessment becomes vital for the success of international contractors. The main aim of this study is to analyse the risks for international construction projects that are related to the host country. Meta-analysis technique is used in order to determine these risks. This paper, therefore, reviews the literature that has been published in four most respected construction and management journals, these being; Journal of Construction Engineering and Management, Journal of Management in Engineering, Construction Management and Economics, and International Journal of Project Management for the period of 2000-2010. International construction risk assessment models are also reviewed within the context of this study, since host country related risk factors were found to have serious effects on the profitability of international contractors due to literature review. As a result; political stability, law and regulations, exchange rate risk, cultural differences, inflation, expropriation, tax discrimination, language barrier, bribery and corruption, force majeure, and societal conflicts in the host country are found to be the most important risk factors in international construction. Findings of this study can be used in risk assessment models for international construction projects.

Biopolitics problems of large-scale hydraulic engineering construction

International Nuclear Information System (INIS)

Romanenko, V.D.

1997-01-01

The XX century which will enter in a history as a century of large-scale hydraulic engineering constructions come to the finish. Only on the European continent 517 large reservoirs (more than 1000 million km 3 of water were detained, had been constructed for a period from 1901 till 1985. In the Danube basin a plenty for reservoirs of power stations, navigations, navigating sluices and other hydraulic engineering structures are constructed. Among them more than 40 especially large objects are located along the main bed of the river. A number of hydro-complexes such as Dnieper-Danube and Gabcikovo, Danube-Oder-Labe (project), Danube-Tissa, Danube-Adriatic Sea (project), Danube-Aegean Sea, Danube-Black Sea ones, are entered into operation or are in a stage of designing. Hydraulic engineering construction was especially heavily conducted in Ukraine. On its territory some large reservoirs on Dnieper and Yuzhny Bug were constructed, which have heavily changed the hydrological regime of the rivers. Summarised the results of river systems regulating in Ukraine one can be noted that more than 27 thousand ponds (3 km 3 per year), 1098 reservoirs of total volume 55 km 3 , 11 large channels of total length more than 2000 km and with productivity of 1000 m 2 /s have been created in Ukraine. Hydraulic engineering construction played an important role in development of the industry and agriculture, water-supply of the cities and settlements, in environmental effects, and maintenance of safe navigation in Danube, Dnieper and other rivers. In next part of the paper, the environmental changes after construction of the Karakum Channel on the Aral Sea in the Middle Asia are discussed

Mimicking Nonequilibrium Steady States with Time-Periodic Driving (Open Source)

Science.gov (United States)

2016-05-18

construction does not require the solution of any differential equations , only linear algebraic equations . By contrast, a mapping in the opposite...set of algebraic linear equations . The mapping between NESS and SP presented above was not intended as a set of operational instructions for... differential equations with time-periodic parameters. Typically, this can only be done numerically. In some applications, transition rates are constrained by

Optimization of the commissioning period of nuclear power plant

International Nuclear Information System (INIS)

Hou Ganglian; Li Chunyue

2014-01-01

Due to current equipment manufacture capacity, construction experience and other factors, commissioning of nuclear power projects was used to be postponed, which could lead to delay of the whole project. Based on the actual situation, optimization of commissioning period and its logic could be an effective way to improve this situation to some extent. Based on previous practice and experience in the schedule management for the commissioning nuclear power projects, this paper analyzes and discusses the characteristics of make commissioning plan and the difficulties of program implementation and strategies of commissioning plan optimization, discusses and presents ways of dynamic plan adjustment and optimization at the vision of entire project, synthesizes the methods of time management through commissioning itself, interface and management, expounds measures for the timing and optimization of commissioning schedule and commissioning period, and sums up the ways of optimization of commissioning period, improving management capabilities and control of optimization principles. (authors)

Correlation between safety climate and contractor safety assessment programs in construction.

Science.gov (United States)

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

Stochastic demand patterns for Markov service facilities with neutral and active periods

International Nuclear Information System (INIS)

Csenki, Attila

2009-01-01

In an earlier paper, a closed form expression was obtained for the joint interval reliability of a Markov system with a partitioned state space S=U union D, i.e. for the probability that the system will reside in the set of up states U throughout the union of some specific disjoint time intervals I l =[θ l ,θ l +ζ l ],l=1,...,k. The deterministic time intervals I l formed a demand pattern specifying the desired active periods. In the present paper, we admit stochastic demand patterns by assuming that the lengths of the active periods, ζ l , as well as the lengths of the neutral periods, θ l -(θ l-1 +ζ l-1 ), are random. We explore two mechanisms for modelling random demand: (1) by alternating renewal processes; (2) by sojourn times of some continuous time Markov chain with a partitioned state space. The first construction results in an expression in terms of a revised version of the moment generating functions of the sojourns of the alternating renewal process. The second construction involves the probability that a Markov chain follows certain patterns of visits to some groups of states and yields an expression using Kronecker matrix operations. The model of a small computer system is analysed to exemplify the ideas

Specifics of system of external influences on the life cycle of a construction object

Directory of Open Access Journals (Sweden)

Aleksanin Aleksander

2016-01-01

Full Text Available There is a very important issue today which includes the harmonious and effective development of the system ‘man –environment’. Construction is a branch of material production, which has a significant negative impact on the world around us. It is necessary to plan and operate processes of construction at all stages of the life cycle of a building without exception, to prevent of ecological threats. The article describes the concept of ‘life cycle’ as applied to various fields of knowledge, analyzes existing in the scientific literature division of the life cycle of buildings in the periods, proposes own approach to the division of periods of the life cycle on the basis of resource-saving. The article proposes the creation of a unified organizational system for the effective management of all periods with the constituent phases and formulates the main external influences on the building life cycle.

Specifics of system of external influences on the life cycle of a construction object

Directory of Open Access Journals (Sweden)

Aleksanin Aleksander

2016-01-01

Full Text Available There is a very important issue today which includes the harmonious and effective development of the system ‘man–environment’. Construction is a branch of material production, which has a significant negative impact on the world around us. It is necessary to plan and operate processes of construction at all stages of the life cycle of a building without exception, to prevent of ecological threats. The article describes the concept of ‘life cycle’ as applied to various fields of knowledge, analyzes existing in the scientific literature division of the life cycle of buildings in the periods, proposes own approach to the division of periods of the life cycle on the basis of resource-saving. The article proposes the creation of a unified organizational system for the effective management of all periods with the constituent phases and formulates the main external influences on the building life cycle.

Quasi-periodic oscillations in short recurring bursts of the soft gamma repeater J1550–5418

Energy Technology Data Exchange (ETDEWEB)

Huppenkothen, D.; D' Angelo, C.; Watts, A. L.; Heil, L.; Van der Klis, M.; Van der Horst, A. J. [Astronomical Institute " Anton Pannekoek," University of Amsterdam, Postbus 94249, 1090 GE Amsterdam (Netherlands); Kouveliotou, C. [Astrophysics Office, ZP 12, NASA-Marshall Space Flight Center, Huntsville, AL 35812 (United States); Baring, M. G. [Department of Physics and Astronomy, Rice University, MS-108, P.O. Box 1892, Houston, TX 77251 (United States); Göğüş, E.; Kaneko, Y. [SabancıUniversity, Orhanlı-Tuzla, İstanbul 34956 (Turkey); Granot, J. [Department of Natural Sciences, The Open University of Israel, 1 University Road, P.O. Box 808, Ra' anana 43537 (Israel); Lin, L. [François Arago Centre, APC, 10 rue Alice Domon et Léonie Duquet, F-75205 Paris (France); Von Kienlin, A. [Max-Planck-Institut für extraterrestrische Physik, Giessenbachstrasse 1, D-85748 Garching (Germany); Younes, G., E-mail: D.Huppenkothen@uva.nl [NSSTC, 320 Sparkman Drive, Huntsville, AL 35805 (United States)

2014-06-01

The discovery of quasi-periodic oscillations (QPOs) in magnetar giant flares has opened up prospects for neutron star asteroseismology. The scarcity of giant flares makes a search for QPOs in the shorter, far more numerous bursts from soft gamma repeaters (SGRs) desirable. In Huppenkothen et al., we developed a Bayesian method for searching for QPOs in short magnetar bursts, taking into account the effects of the complicated burst structure, and have shown its feasibility on a small sample of bursts. Here we apply the same method to a much larger sample from a burst storm of 286 bursts from SGR J1550–5418. We report a candidate signal at 260 Hz in a search of the individual bursts, which is fairly broad. We also find two QPOs at ∼93 Hz, and one at 127 Hz, when averaging periodograms from a number of bursts in individual triggers, at frequencies close to QPOs previously observed in magnetar giant flares. Finally, for the first time, we explore the overall burst variability in the sample and report a weak anti-correlation between the power-law index of the broadband model characterizing aperiodic burst variability and the burst duration: shorter bursts have steeper power-law indices than longer bursts. This indicates that longer bursts vary over a broader range of timescales and are not simply longer versions of the short bursts.

Potential and Benefits of Building Information Modeling (BIM During Pre-Construction, Construction and Post Construction Stage

Directory of Open Access Journals (Sweden)

Aw Nien Wei

2017-11-01

Full Text Available The construction industry is the main economic support for all countries around the world in which continually adapting to meet competitive challenges around the global market. Nevertheless, the construction project is becoming much more complex and difficult to manage. This is because the construction project involves a large number of stakeholder, for example, the consultant companies, architects, engineers, building surveyors and quantity surveyors. The technology currently used in the construction industry is the AutoCAD (Automatic computeraided design. AutoCAD is a commercial software application for 2D and 3D computer-aided design (CAD and drafting develop by Autodesk. Generally, all the drawing design from Autocad will be exchanged among the stakeholder in the form of paper. Information exchanged among them mostly involves a lot of documents and drawings. This practice creates errors because of documents and drawings are mostly in a paper-based format that is not properly managed which results in miscommunication among them. Having wrong information in the construction process could hinder the productivity of projects because in a construction project information is one of the important construction materials. Building Information Modeling (BIM is one of the newly software in the architecture, engineering, and construction (AEC industries to ensure all parties receive the right information. BIM technology is also an intelligent model of a building constructed digitally in the way of 3D. The software will generate model containing the information needed to support the construction, fabrication, and procurement activities that needed to realize the building. This paper will discuss on potential and benefits of BIM during pre-construction stage, construction stage and during post construction stage

Latent constructs underlying sensory subtypes in children with autism: A preliminary study.

Science.gov (United States)

Hand, Brittany N; Dennis, Simon; Lane, Alison E

2017-08-01

Recent reports identify sensory subtypes in ASD based on shared patterns of responses to daily sensory stimuli [Ausderau et al., 2014; Lane, Molloy, & Bishop, 2014]. Lane et al. propose that two broad sensory dimensions, sensory reactivity and multisensory integration, best explain the differences between subtypes, however this has yet to be tested. The present study tests this hypothesis by examining the latent constructs underlying Lane's sensory subtypes. Participants for this study were caregivers of children with autism spectrum disorder (ASD) aged 2-12 years. Caregiver responses on the Short Sensory Profile (SSP), used to establish Lane's sensory subtypes, were extracted from two existing datasets (total n = 287). Independent component analyses were conducted to test the fit and interpretability of a two-construct structure underlying the SSP, and therefore, the sensory subtypes. The first construct was largely comprised of the taste/smell sensitivity domain, which describes hyper-reactivity to taste and smell stimuli. The second construct had a significant contribution from the low energy/weak domain, which describes behaviors that may be indicative of difficulties with multisensory integration. Findings provide initial support for our hypothesis that sensory reactivity and multisensory integration underlie Lane's sensory subtypes in ASD. Autism Res 2017, 10: 1364-1371. © 2017 International Society for Autism Research, Wiley Periodicals, Inc. © 2017 International Society for Autism Research, Wiley Periodicals, Inc.

A geometric theory for semilinear almost-periodic parabolic partial differential equations on RN

International Nuclear Information System (INIS)

Vuillermot, P.A.

1991-01-01

In this short expository article we review various applications of some geometric methods which have been recently devised to investigate the long time behaviour of classical solutions to certain semilinear almost-periodic reaction-diffusion equations on R N . As a consequence, we also show how to construct almost-periodic attractors for such equations and how to investigate their stability properties. The class of problems which we analyse here contains in particular well known equations of population genetics. (author). 17 refs

The de-construction programme for EDF'S first generation power plants

International Nuclear Information System (INIS)

Zask, G.; Corcuff, A.

2003-01-01

Before 2001 EDF had adopted a 'long wait' scenario for the de-construction of nuclear power plants, consisting of waiting for a period of 5 to 10 years for IAEA level 2 (partial release of the site), then postponing the total de-construction of the facility for 25 to 50 years, in order to benefit from the natural decay of the radioactivity and thereby reduce the dosimetry of the personnel and the costs. Today, as regards the 8 power plants of the first generation and Creys-Malville, EDF has decided to undertake the total de-construction over a period of 25 years of all its reactors that have ceased commercial operation. The forecast cost of this programme amounts to Euro 3 billion. It thus intends to demonstrate its capacity to control, within the scale of the human lifespan, the entire life cycle of its nuclear power plants, while minimising the impact on man and the environment. This choice of immediate dismantling for the power plants of the first generation does not prejudge what will be done, when the time comes, for the PWR plants currently in operation. The paper has the following contents: 1. General; 2.The facilities concerned; 3. Chronological sequence adopted for de-construction; 4. Milestones and critical paths; 4.1. Simplification of the administrative procedures; 4.2. The waste channels; 4.3. Industrial organisation; 4.3.1. Creation of Centre d'Ingenierie De-construction et Environnement (CIDEN); 4.3.2. Responsibilities, interfaces and co-ordination of the various departments concerned (Role of owner: Responsibility as nuclear operator; Overall co-ordination; Operational steering of projects); 4.3.3. Internal authorization process; 4.3.4. Obtaining and maintaining skills (Training; Environment; De-construction; Radiological protection, radiology, radioecology; Processing of waste and approval of the cycle); 4.3.5. Monitoring of works and surveillance of service providers; 4.3.6. Radiological protection, environment; 4.3.7. Control of conventional

Hypofractionated Breast Radiation: Shorter Scheme, Lower Toxicity.

Science.gov (United States)

Linares, Isabel; Tovar, María Isabel; Zurita, Mercedes; Guerrero, Rosario; Expósito, Manuela; Del Moral, Rosario

2016-08-01

We analyzed the toxicity and cosmetic outcomes for patients who had undergone 3-dimensional conformal radiotherapy with a hypofractionated schedule and identified the risk factors associated with such a schedule. A total of 143 patients were treated for breast cancer (stage 0-III) with a hypofractionated radiation schedule after breast-conserving surgery from 2006 to 2011. Most patients received 42.4 Gy in 16 daily fractions, 2.65 Gy per fraction to the whole breast plus an additional simultaneous integrated or sequential boost to the tumor bed. The median follow-up period was 36 months. Mild acute skin toxicity was observed in 62%; 7% of the patients developed moderate skin toxicity, but no grade 4 toxicity was observed. The prevalence of fibrosis within the boost area was 5%, but no grade ≥ 2 was observed. The prevalence of fibrosis of any grade was greater in the nonboost (23%) than in the boost area. Of all the patients, 91% had good or excellent cosmetic outcomes. From the multivariate analysis, the incidence of epithelitis correlated with the patient's treated volume (P = .044). The incidence of acute toxicity correlated with the boost type to the tumor bed and the total treatment dose (P = .012 and P = .002, respectively). Also, a poor to fair cosmetic outcome was significantly associated statistically with the surgery type (P = .05), boost type (P = .004), and total dose (P = .001). Delivering whole-breast irradiation with a hypofractionated schedule of 42.4 Gy plus a simultaneous integrated boost to the tumor bed appears to be a safe and effective technique, with good cosmetic results and lower toxicity. Copyright © 2015 Elsevier Inc. All rights reserved.

Construction concepts and validation of the 3D printed UST_2 modular stellarator

Science.gov (United States)

Queral, V.

2015-03-01

High accuracy, geometric complexity and thus high cost of stellarators tend to hinder the advance of stellarator research. Nowadays, new manufacturing methods might be developed for the production of small and middle-size stellarators. The methods should demonstrate advantages with respect common fabrication methods, like casting, cutting, forging and welding, for the construction of advanced highly convoluted modular stellarators. UST2 is a small modular three period quasi-isodynamic stellarator of major radius 0.26 m and plasma volume 10 litres being currently built to validate additive manufacturing (3D printing) for stellarator construction. The modular coils are wound in grooves defined on six 3D printed half period frames designed as light truss structures filled by a strong filler. A geometrically simple assembling configuration has been concocted for UST2 so as to try to lower the cost of the device while keeping the positioning accuracy of the different elements. The paper summarizes the construction and assembling concepts developed, the devised positioning methodology, the design of the coil frames and positioning elements and, an initial validation of the assembling of the components.

Gabor frames by sampling and periodization

DEFF Research Database (Denmark)

Søndergaard, Peter Lempel

2007-01-01

By sampling the window of Gabor frame for L-2 (R) belonging to Feichtingers algebra S-0 (R), one obtains a Gabor frame for l(2) (Z). In this article we present a survey of results by R. Orr and A.J.E.M. Janssen and extend their ideas to cover interrelations among Gabor frames for the four spaces L......-2 (R), l(2) (Z), L-2 ([O,L]) and C-L. Some new results about the general dual windows with respect to sampling and periodization are presented as well. This theory is used to show a new result of the Kaiblinger type to construct an approximation to the canonical dual window of a Gabor frame for L-2...

Construction quality assurance program plan for the WIPP project, Carlsbad, NM

International Nuclear Information System (INIS)

1987-05-01

The purpose of this plan is to describe the Quality Assurance (QA) Program to be established and implemented by the US Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) Project Office (WPO) and by the Major Project Participants: the Architect-Engineer (Bechtel), the Construction Manager (US Army Corps of Engineers), the Scientific Advisor (Sandia National Laboratory), and the Management and Operating Contractor (Westinghouse Electric Corporation). This plan addresses the construction, including site evaluation, design, and turnover phases of WIPP. Other work in progress during the same period is controlled by DOE documents applicable to that work effort. The prime responsibility for ensuring the quality of construction rests with the DOE WIPP Project Office and is implemented through the combined efforts of the Construction Manager, the Construction Contractors, the Management and Operating Contractor, and the Architect-Engineer. Inspection and burden of proof of acceptability rests with the Construction Contractor as defined by the technical provisions of the contract and as otherwise specified by the DOE WIPP Project Office on an individual work-package basis. To the maximum extent possible, acceptance of work will be based upon first-hand witnessing by the Construction Manager and other representatives of the DOE organization

Custodians of Sacred Space : Constructing the Franciscan Holy Land through texts and sacri monti (ca. 1480-1650)

NARCIS (Netherlands)

Ritsema van Eck, M.P.

2017-01-01

This dissertation investigates the construction of the Franciscan Holy Land as an ideological construct during the late medieval and early modern period. Based on an extensive corpus of texts, defined as Franciscan Holy Land writing, and a (re-)consideration of the sacri monti of Varallo and La

Global convergence of periodic solution of neural networks with discontinuous activation functions

International Nuclear Information System (INIS)

Huang Lihong; Guo Zhenyuan

2009-01-01

In this paper, without assuming boundedness and monotonicity of the activation functions, we establish some sufficient conditions ensuring the existence and global asymptotic stability of periodic solution of neural networks with discontinuous activation functions by using the Yoshizawa-like theorem and constructing proper Lyapunov function. The obtained results improve and extend previous works.

Quasi-periodic Fibonacci and periodic one-dimensional hypersonic phononic crystals of porous silicon: Experiment and simulation

Energy Technology Data Exchange (ETDEWEB)

Aliev, Gazi N., E-mail: g.aliev@bath.ac.uk; Goller, Bernhard [Department of Physics, University of Bath, Bath BA2 7AY (United Kingdom)

2014-09-07

A one-dimensional Fibonacci phononic crystal and a distributed Bragg reflector were constructed from porous silicon. The structures had the same number of layers and similar acoustic impedance mismatch, and were electrochemically etched in highly boron doped silicon wafers. The thickness of the individual layers in the stacks was approximately 2 μm. Both types of hypersonic band gap structure were studied by direct measurement of the transmittance of longitudinal acoustic waves in the 0.1–2.6 GHz range. Acoustic band gaps deeper than 50 dB were detected in both structures. The experimental results were compared with model calculations employing the transfer matrix method. The acoustic properties of periodic and quasi-periodic structures in which half-wave retarding bi-layers do not consist of two quarter-wave retarding layers are discussed. The strong correlation between width and depth of gaps in the transmission spectra is demonstrated. The dominant mechanisms of acoustic losses in porous multilayer structures are discussed. The elastic constants remain proportional over our range of porosity, and hence, the Grüneisen parameter is constant. This simplifies the expression for the porosity dependence of the Akhiezer damping.

Evaluating and Refining the Construct of Sexual Quality With Item Response Theory: Development of the Quality of Sex Inventory.

Science.gov (United States)

Shaw, Amanda M; Rogge, Ronald D

2016-02-01

This study took a critical look at the construct of sexual quality. The 65 items of four well-validated self-report measures of sexual satisfaction (the Index of Sexual Satisfaction [ISS], Hudson, Harrison, & Crosscup, 1981; the Global Measure of Sexual Satisfaction [GMSEX], Lawrance & Byers, 1995; the Pinney Sexual Satisfaction Inventory [PSSI], Pinney, Gerrard, & Denney, 1987; the Young Sexual Satisfaction Scale [YSSS], Young, Denny, Luquis, & Young, 1998) and an additional 74 potential sexual quality items were given to 3060 online participants. Using Item Response Theory (IRT), we demonstrated that the ISS, YSSS, and PSSI scales provided suboptimal levels of precision in assessing sexual quality, particularly given the length of those scales. Exploratory factor analyses, IRT, differential item functioning analyses, and longitudinal responsiveness analyses were used to develop and evaluate the Quality of Sex Inventory. Results suggested that, in comparison to existing scales, the QSI (1) offers investigators and clinicians more theoretically focused scales, (2) distinguishes sexual satisfaction from sexual dissatisfaction, and (3) offers greater precision and power for detecting differences with (4) comparably high levels of responsiveness for detecting change over time despite being notably shorter than most of the existing scales. The QSI-satisfaction subscales demonstrated strong convergent validity with other measures of sexual satisfaction and excellent construct validity with anchor scales from the nomological net surrounding that construct, suggesting that they continue to assess the same theoretical construct as prior scales. Implications for research are discussed.

Linking response strategies adopted by construction firms during the 2007 economic recession to Porter’s generic strategies

OpenAIRE

Tansey, Paul; Spillane, John P.; Meng, Xianhai

2014-01-01

The time period bridging the years 2007 to 2012 will be remembered as one characterised by dramatic changes in the Irish and UK construction industries. Construction companies witnessed unprecedented changes in the environment, namely the coincidence of a sharp economic downturn, the significant decline of public works, a reduction in lending, increased competition, and structural changes in the marketplace. Nevertheless, little has been documented on what response strategies construction com...

Effect of Pre-Construction on Construction Schedule and Client Loyalty

OpenAIRE

Jong Hoon Kim; Hyun-Soo Lee; Moonseo Park; Min Jeong; Inbeom Lee

2016-01-01

Pre-construction is essential in achieving the success of a construction project. Due to the early involvement of project participants in the construction phase, project managers are able to plan ahead and solve issues well in advance leading to the success of the project and the satisfaction of the client. This research utilizes quantitative data derived from construction management projects in order to identify the relationship between pre-construction, construction schedule, and client sat...

Existence of periodic orbits in nonlinear oscillators of Emden–Fowler form

Energy Technology Data Exchange (ETDEWEB)

Mancas, Stefan C., E-mail: mancass@erau.edu [Department of Mathematics, Embry–Riddle Aeronautical University, Daytona Beach, FL 32114-3900 (United States); Rosu, Haret C., E-mail: hcr@ipicyt.edu.mx [IPICyT, Instituto Potosino de Investigacion Cientifica y Tecnologica, Camino a la presa San José 2055, Col. Lomas 4a Sección, 78216 San Luis Potosí, SLP (Mexico)

2016-01-28

The nonlinear pseudo-oscillator recently tackled by Gadella and Lara is mapped to an Emden–Fowler (EF) equation that is written as an autonomous two-dimensional ODE system for which we provide the phase-space analysis and the parametric solution. Through an invariant transformation we find periodic solutions to a certain class of EF equations that pass an integrability condition. We show that this condition is necessary to have periodic solutions and via the ODE analysis we also find the sufficient condition for periodic orbits. EF equations that do not pass integrability conditions can be made integrable via an invariant transformation which also allows us to construct periodic solutions to them. Two other nonlinear equations, a zero-frequency Ermakov equation and a positive power Emden–Fowler equation, are discussed in the same context. - Highlights: • An invariant transformation is used to find periodic solution of EF equations. • Phase plane study of the EF autonomous two-dimensional ODE system is performed. • Three examples are presented from the standpoint of the phase plane analysis.

A Simulator of Periodically Switching Channels for Power Line Communications

Science.gov (United States)

Hayasaki, Taro; Umehara, Daisuke; Denno, Satoshi; Morikura, Masahiro

An indoor power line is one of the most attractive media for in-home networks. However, there are many technical problems for achieving in-home power line communication (PLC) with high rate and high reliability. One of such problem is the degradation in the performance of the in-home PLC caused by periodically time-varying channel responses, particularly when connecting the switching power supply equipment. We present a measurement method for power line channel responses and reveal the switching of the channel responses synchronized with power-frequency voltage when connecting switching power supply equipment in sending or receiving outlets. In this paper, we term them periodically switching channel responses. The performance of PLC adapters is seriously affected by the periodically switching channel responses. Therefore, we provide a modeling of the periodically switching channel responses by using finite impulse response (FIR) filters with a shared channel memory and construct a simulator for in-home power line channels including the periodically switching channel responses in order to evaluate the various communication systems through the power line. We present the validity of the proposed simulator through the performance evaluation of OFDM/64QAM over periodically switching channels with additive white Gaussian noise. Furthermore, we evaluate the influence of the periodically switching channel responses on the communication quality of a time-invariant modulation scheme by using the proposed simulator.

A study for EVMS application to NPP construction project

Energy Technology Data Exchange (ETDEWEB)

Roh, M. S.; Kwak, J. K. [KEPCO, Daejeon (Korea, Republic of)

2016-05-15

The earned value project management method integrates three critical elements of project management scope management, cost management and time management. It requires the periodic monitoring of actual expenditures and physical scope accomplishments, and allows calculation of cost and schedule variances along with performance indices. It allows forecasting of project cost and schedule at completion and highlights the possible need for corrective action. It is also anticipated that there will be intense competition in the nuclear industry as the cost and time for nuclear power plant construction. In order to attain competitive advantages under the globalized market, utilizing advanced project control systems by integrating cost and time management is of great concern for practitioners as well as the researchers. In this context, the purpose of this paper is to identify major previously improving activities that characterize the real-world Earned Value Management System (EVMS) implementation for nuclear power plant construction. And several distinct attributes of nuclear power plant construction were also investigated.

A study for EVMS application to NPP construction project

International Nuclear Information System (INIS)

Roh, M. S.; Kwak, J. K.

2016-01-01

The earned value project management method integrates three critical elements of project management scope management, cost management and time management. It requires the periodic monitoring of actual expenditures and physical scope accomplishments, and allows calculation of cost and schedule variances along with performance indices. It allows forecasting of project cost and schedule at completion and highlights the possible need for corrective action. It is also anticipated that there will be intense competition in the nuclear industry as the cost and time for nuclear power plant construction. In order to attain competitive advantages under the globalized market, utilizing advanced project control systems by integrating cost and time management is of great concern for practitioners as well as the researchers. In this context, the purpose of this paper is to identify major previously improving activities that characterize the real-world Earned Value Management System (EVMS) implementation for nuclear power plant construction. And several distinct attributes of nuclear power plant construction were also investigated

Shorter Ground Contact Time and Better Running Economy: Evidence From Female Kenyan Runners.

Science.gov (United States)

Mooses, Martin; Haile, Diresibachew W; Ojiambo, Robert; Sang, Meshack; Mooses, Kerli; Lane, Amy R; Hackney, Anthony C

2018-06-25

Mooses, M, Haile, DW, Ojiambo, R, Sang, M, Mooses, K, Lane, AR, and Hackney, AC. Shorter ground contact time and better running economy: evidence from female Kenyan runners. J Strength Cond Res XX(X): 000-000, 2018-Previously, it has been concluded that the improvement in running economy (RE) might be considered as a key to the continued improvement in performance when no further increase in V[Combining Dot Above]O2max is observed. To date, RE has been extensively studied among male East African distance runners. By contrast, there is a paucity of data on the RE of female East African runners. A total of 10 female Kenyan runners performed 3 × 1,600-m steady-state run trials on a flat outdoor clay track (400-m lap) at the intensities that corresponded to their everyday training intensities for easy, moderate, and fast running. Running economy together with gait characteristics was determined. Participants showed moderate to very good RE at the first (202 ± 26 ml·kg·km) and second (188 ± 12 ml·kg·km) run trials, respectively. Correlation analysis revealed significant relationship between ground contact time (GCT) and RE at the second run (r = 0.782; p = 0.022), which represented the intensity of anaerobic threshold. This study is the first to report the RE and gait characteristics of East African female athletes measured under everyday training settings. We provided the evidence that GCT is associated with the superior RE of the female Kenyan runners.

Adapting Bioretention Construction Details to Local Practices in Finland

Directory of Open Access Journals (Sweden)

Outi Tahvonen

2018-01-01

Full Text Available Bioretention is a method of storm water management that includes several processes following the natural hydrological cycle. Bioretention, or variations of it, include rain gardens and bioswales, infiltrates, filtrates, evapotranspirates, and help to store and manage storm water run-off. A bioretention cell retains water, removes pollutants, and provides water elements for urban green areas. Although bioretention is a promising method for multifunctional storm water management, its construction details should not be copied from other climatic areas. A direct application may dismiss local conditions, materials, and construction practices. This study aimed to adapt construction details for bioretention to Finnish local practices and conditions and to formulate bioretention constructions that balance water, soil, and vegetation. First, construction details were reviewed, then local adaptations were applied, and finally, the application and two variations of growing media in two construction depths were tested in a test field in Southern Finland. Sandy growing media allowed the efficient retention of water during the first year, but failed to provide vital growth. The use of topsoil and compost in the growing media improved growth, but held high electrical conductivity after infiltration. All the experimental cells in the test field showed activity during the melting periods, both during winter and spring. If bioretention plays a multifunctional role in urban design and engineered ecology, the design parameters should not only focus on storm water quantity, but also on quality management and vegetation growth.

Nostalgic constructions of nurse education in British national newspapers.

Science.gov (United States)

Gillett, Karen

2014-11-01

To explore nostalgic constructions of nurse education in British National newspapers. British newspaper discourse relating to the increased academic level of nurse education in the UK is negative, evoking comparisons between negative constructions of nurse education in the present and an idealized nostalgic view of the past. Discussion paper. This study used a critical discourse analysis approach to analyse 11 British Newspaper articles, which exemplify nostalgic constructions of nurse education. This was a purposive sample from a database search (LexisNexis) of British national newspaper articles relating to the increasing academic level of nurse education in the period from 1999-2012. A dominant nostalgic discourse constructs a 'golden era' of nurse education, which idealizes the past, making the present flawed in comparison. Nostalgic constructions create group identities creating contrasting 'caring' nurses educated in the idealized past with those educated now, who are perceived as too educated to care. An inherent characteristic of the nostalgic discourse is the notion that the solution to current problems with nurse education is a return to an idealized version of the past. Another less common newspaper discourse views nostalgia as a problematic construct. Nostalgic discourse with a focus on the past potentially acts as a barrier to creating an effective nurse education system for the 21(st) Century. This focus on an idealized past also has potential consequences in terms of public opinion and legitimization of government policy, which might otherwise be viewed as retrograde. © 2014 John Wiley & Sons Ltd.

Sustainable Construction Risk Perceptions in the Kuwaiti Construction Industry

Directory of Open Access Journals (Sweden)

Dalya Ismael

2018-06-01

Full Text Available Sustainable construction is fundamentally different than traditional construction because it requires whole systems thinking, early collaboration across stakeholders, and core principles like reducing resource consumption, eliminating toxins, and applying life cycle costing. Construction professionals unfamiliar with this mindset and approach may perceive sustainable construction as risky. One of the global regions in need of more sustainable construction is the Middle Eastern and North African (MENA region. The MENA region is one of the fastest developing in the world. However, it is the slowest one in implementing sustainable construction practices. Kuwait, in particular, contributes 53% more carbon emissions per capita than the United States. To understand how the Kuwaiti construction industry perceives risks associated with more sustainable construction, a survey was developed with 52 risk elements in which 131 industry professionals responded. The results indicate that industry professionals perceive a lack of public awareness as the risk element with the highest probability of occurrence. The risk element with the highest possible negative impact on future projects is designers’ and contractors’ inexperience with sustainable construction. Other risks were found to include a high initial cost for materials and overall project costs. Educational interventions, changes in risk allocation, and behavioral science to reframe upfront costs as long-term savings are offered as possible solutions.

Evaluation of a participatory ergonomics intervention in small commercial construction firms.

Science.gov (United States)

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Gardner, Bethany T; Buchholz, Bryan; Weaver, Nancy; Evanoff, Bradley A

2016-06-01

Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short-term and intermediate impacts and long-term outcomes from surveys and field records. Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers' knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. Am. J. Ind. Med. 59:465-475, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Existence of Periodic Solutions and Stability of Zero Solution of a Mathematical Model of Schistosomiasis

Directory of Open Access Journals (Sweden)

Lin Li

2014-01-01

Full Text Available A mathematical model on schistosomiasis governed by periodic differential equations with a time delay was studied. By discussing boundedness of the solutions of this model and construction of a monotonic sequence, the existence of positive periodic solution was shown. The conditions under which the model admits a periodic solution and the conditions under which the zero solution is globally stable are given, respectively. Some numerical analyses show the conditional coexistence of locally stable zero solution and periodic solutions and that it is an effective treatment by simply reducing the population of snails and enlarging the death ratio of snails for the control of schistosomiasis.

Transuranium Processing Plant semiannual report of production, status, and plans for period ending December 31, 1976

International Nuclear Information System (INIS)

King, L.J.; Bigelow, J.E.; Collins, E.D.

1977-10-01

During the period July 1, 1976, through December 31, 1976, transuranium elements were obtained from 11 irradiated HFIR targets; products recovered are 0.3 g 243 Am, 16.6 g 244 Cm, 23 g 249 Bk, 211 g 252 Cf, 1.15 mg 253 Es, and 0.4 pg 247 Fm. Two batches of high-purity 248 Cm were purified chemically for shipment, and another batch containing about 62 mg of 248 Cm was separated from 252 Cf. Thirty shipments were made from TRU during the period; recipients and the amounts of nuclides are listed in tabular form. Nine HFIR targets, each containing 8 to 9 g of curium, were fabricated. The sequence of chemical processing steps used to purify the californium product was changed; this change yielded a shorter recovery time for high-purity 253 Es, which enabled a 50% increase in the amount obtained. Eight neutron sources were fabricated during this report period, bringing the total fabricated to date to 92. Three sources that had previously been returned to TRU were reassigned; two others are also available for reassignment. The values currently being used for transuranium element decay data and for cross-section data in planning irradiation-processing cycles, calculating production forecasts, and assaying products are tabulated in the Appendix

High Numbers of Stromal Cancer-Associated Fibroblasts Are Associated With a Shorter Survival Time in Cats With Oral Squamous Cell Carcinoma.

Science.gov (United States)

Klobukowska, H J; Munday, J S

2016-11-01

Cancer-associated fibroblasts (CAFs) are fibroblastic cells that express α-smooth muscle actin and have been identified in the stroma of numerous epithelial tumors. The presence of CAFs within the tumor stroma has been associated with a poorer prognosis in some human cancers, including oral squamous cell carcinomas (SCCs). Cats frequently develop oral SCCs, and although these are generally highly aggressive neoplasms, there is currently a lack of prognostic markers for these tumors. The authors investigated the prognostic value of the presence of CAFs within the stroma of oral SCC biopsy specimens from 47 cats. In addition, several epidemiologic, clinical, and histologic variables were also assessed for prognostic significance. A CAF-positive stroma was identified in 35 of 47 SCCs (74.5%), and the median survival time (ST) of cats with CAF-positive SCCs (35 days) was significantly shorter than that of cats with CAF-negative SCCs (48.5 days) (P = .031). ST was also associated with the location of the primary tumor (P = .0018): the median ST for oropharyngeal SCCs (179 days) was significantly longer than for maxillary (43.5 days; P = .047), mandibular (42 days; P = .022), and sublingual SCCs (22.5 days; P = .0005). The median ST of sublingual SCCs was also shorter compared with maxillary SCCs (P = .0017). Furthermore, a significant association was identified between site and the presence of stromal CAFs (P = .025). On the basis of this retrospective study, evaluating the tumor stroma for CAFs in feline oral SCC biopsy specimens may be of potential prognostic value. © The Author(s) 2016.

Construction and performance research on variable-length codes for multirate OCDMA multimedia networks

Science.gov (United States)

Li, Chuan-qi; Yang, Meng-jie; Luo, De-jun; Lu, Ye; Kong, Yi-pu; Zhang, Dong-chuang

2014-09-01

A new kind of variable-length codes with good correlation properties for the multirate asynchronous optical code division multiple access (OCDMA) multimedia networks is proposed, called non-repetition interval (NRI) codes. The NRI codes can be constructed by structuring the interval-sets with no repetition, and the code length depends on the number of users and the code weight. According to the structural characteristics of NRI codes, the formula of bit error rate (BER) is derived. Compared with other variable-length codes, the NRI codes have lower BER. A multirate OCDMA multimedia simulation system is designed and built, the longer codes are assigned to the users who need slow speed, while the shorter codes are assigned to the users who need high speed. It can be obtained by analyzing the eye diagram that the user with slower speed has lower BER, and the conclusion is the same as the actual demand in multimedia data transport.

Construction Managers’ Perception of the Factors Affecting Sustainability in Construction Projects

OpenAIRE

Reza Taheriattar; Morvarid Farzanehrafat

2014-01-01

Sustainable construction is a comprehensive concept which requires long-term planning. Moreover, construction managers play a key role in leading, planning and scheduling of a construction project. As a result, sustainability of construction projects can be affected by construction managers’ decisions. In addition, for greater development of sustainable construction, affecting factors should firstly be notified. Therefore, it seems necessary to investigate construction managers’ perception of...

Design and Construction of Manned Lunar Base

Science.gov (United States)

Li, Zhijie

2016-07-01

the condition of the same volume it has less weight than rigid module, but based on durable, high hermetic, low density and elastic modulus advanced materials. 3.The construction habitation has high expansibility and various configurations by using in situ resources as construction materials, but this technique is difficult to implement since it involves deep exploitation of lunar resources. Aiming at different missions' objects and development periods, three different patterns talked above can be chosen as the scheme of lunar base habitation establishments. But each of them is too simple to adapt high-level lunar base during a long period. Thereby, based on the design of rigid module and flexible module, this paper brings out an assumed scheme of an integrated lunar base, and the exterior part of lunar base is built by using construction technique. The design of lunar base follows the principle of crew-robot coordinated exploration, which functions automatically in a long period and short period with attention by astronauts. The technique characteristics are as follows: life period ≥ 8 years; 6 astronauts; single lunar surface mission period ≥ 3 months. The inner main body of integrated manned lunar base consists of habitation module, laboratory module and support module. In order to afford security and comfortableness, the habitation module provides astronauts kitchen, bedroom, gymnasium, toilet, and so on. The laboratory module is used for science experiments, which involves plant cultivation devices and animal cultivation devices of bioregenerative life support system. The communication system, main computer, central control system and backup powers are arranged in the support module. For convenience of outside working and emergency rescue, every module with two exports is connected with other modules or lunar rovers. In order to solve the problems of waste treatment, atmosphere/water regeneration and food supply, this paper designed a bioregenerative life

A case-control study of airways obstruction among construction workers.

Science.gov (United States)

Dement, John; Welch, Laura; Ringen, Knut; Quinn, Patricia; Chen, Anna; Haas, Scott

2015-10-01

While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Approximately 18% (95% CI = 2-24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. A measure of all VGDF exposures combined was a strong predictor of COPD risk. Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Examining job tenure and lost-time claim rates in Ontario, Canada, over a 10-year period, 1999-2008.

Science.gov (United States)

Morassaei, Sara; Breslin, F Curtis; Shen, Min; Smith, Peter M

2013-03-01

We sought to examine the association between job tenure and lost-time claim rates over a 10-year period in Ontario, Canada. Data were obtained from workers' compensation records and labour force survey data from 1999 to 2008. Claim rates were calculated for gender, age, industry, occupation, year and job tenure group. A multivariate analysis and examination of effect modification were performed. Differences in injury event and source of injury were also examined by job tenure. Lost-time claim rates were significantly higher for workers with shorter job tenure, regardless of other factors. Claim rates for new workers differed by gender, age and industry, but remained relatively constant at an elevated rate over the observed time period. This study is the first to examine lost-time claim rates by job tenure over a time period during which overall claim rates generally declined. Claim rates did not show a convergence by job tenure. Findings highlight that new workers are still at elevated risk, and suggest the need for improved training, reducing exposures among new workers, promoting permanent employment, and monitoring work injury trends and risk factors.

RIEGER-TYPE PERIODICITY DURING SOLAR CYCLES 14–24: ESTIMATION OF DYNAMO MAGNETIC FIELD STRENGTH IN THE SOLAR INTERIOR

Energy Technology Data Exchange (ETDEWEB)

Gurgenashvili, Eka; Zaqarashvili, Teimuraz V.; Kukhianidze, Vasil; Ramishvili, Giorgi; Shergelashvili, Bidzina [Abastumani Astrophysical Observatory at Ilia State University, Tbilisi, Georgia (United States); Oliver, Ramon; Ballester, Jose Luis [Departament de Física, Universitat de les Illes Balears, E-07122, Palma de Mallorca (Spain); Hanslmeier, Arnold [IGAM, Institute of Physics, University of Graz, Universitätsplatz 5, A-8010 Graz (Austria); Poedts, Stefaan, E-mail: teimuraz.zaqarashvili@uni-graz.at [Centre for Mathematical Plasma Astrophysics, Department of Mathematics, KU Leuven, Celestijnenlaan 200B, B-3001, Leuven (Belgium)

2016-07-20

Solar activity undergoes a variation over timescales of several months known as Rieger-type periodicity, which usually occurs near maxima of sunspot cycles. An early analysis showed that the periodicity appears only in some cycles and is absent in other cycles. But the appearance/absence during different cycles has not been explained. We performed a wavelet analysis of sunspot data from the Greenwich Royal Observatory and the Royal Observatory of Belgium during cycles 14–24. We found that the Rieger-type periods occur in all cycles, but they are cycle dependent: shorter periods occur during stronger cycles. Our analysis revealed a periodicity of 185–195 days during the weak cycles 14–15 and 24 and a periodicity of 155–165 days during the stronger cycles 16–23. We derived the dispersion relation of the spherical harmonics of the magnetic Rossby waves in the presence of differential rotation and a toroidal magnetic field in the dynamo layer near the base of the convection zone. This showed that the harmonics of fast Rossby waves with m = 1 and n = 4, where m ( n ) indicates the toroidal (poloidal) wavenumbers, perfectly fit with the observed periodicity. The variation of the toroidal field strength from weaker to stronger cycles may lead to the different periods found in those cycles, which explains the observed enigmatic feature of the Rieger-type periodicity. Finally, we used the observed periodicity to estimate the dynamo field strength during cycles 14–24. Our estimations suggest a field strength of ∼40 kG for the stronger cycles and ∼20 kG for the weaker cycles.

Localized and periodic exact solutions to the nonlinear Schroedinger equation with spatially modulated parameters: Linear and nonlinear lattices

International Nuclear Information System (INIS)

Belmonte-Beitia, Juan; Konotop, Vladimir V.; Perez-Garcia, Victor M.; Vekslerchik, Vadym E.

2009-01-01

Using similarity transformations we construct explicit solutions of the nonlinear Schroedinger equation with linear and nonlinear periodic potentials. We present explicit forms of spatially localized and periodic solutions, and study their properties. We put our results in the framework of the exploited perturbation techniques and discuss their implications on the properties of associated linear periodic potentials and on the possibilities of stabilization of gap solitons using polychromatic lattices.

Study on reprocessing plant during transition period from LWR to FBR

International Nuclear Information System (INIS)

Shimada, Takashi; Matsui, Minefumi; Nishimura, Masashi; Ishida, Yasuhiro; Mori, Yukihide; Kuroda, Kazuhiko

2011-01-01

We have proposed a concept of a reprocessing plant suitable for the transition period from the light water reactors (LWRs) to the fast breeder reactors (FBRs) by making comparison of two plant concepts: (1) Independent Plant which processes LWR fuel and FBR fuel in separately constructed lines and (2) Modularized Plant which processes LWR fuel and FBR fuel in a same line. We made construction plans based on the reference power generation plan, and evaluated the Pu supply capability using the power generation plan as an indicator of plant operation flexibility. In general, a margin of processing capacity increases the Pu supply capability. The margin of the Modularized Plant necessary to obtain equivalent Pu supply capability is smaller than that of the Independent Plant. Also the margin of the Independent Plant results in decrease in the plant utilization factor. But the margin of the Modularized Plant results in little decrease in the plant utilization factor, because the Modularized Plant can address the types of reprocessing fuel to adjust to Pu demand and processing capacity. Therefore, the Modularized Plant has a greater potential for the reprocessing plants during transition period. (author)

Lagrangian fractional step method for the incompressible Navier--Stokes equations on a periodic domain

International Nuclear Information System (INIS)

Boergers, C.; Peskin, C.S.

1987-01-01

In the Lagrangian fractional step method introduced in this paper, the fluid velocity and pressure are defined on a collection of N fluid markers. At each time step, these markers are used to generate a Voronoi diagram, and this diagram is used to construct finite-difference operators corresponding to the divergence, gradient, and Laplacian. The splitting of the Navier--Stokes equations leads to discrete Helmholtz and Poisson problems, which we solve using a two-grid method. The nonlinear convection terms are modeled simply by the displacement of the fluid markers. We have implemented this method on a periodic domain in the plane. We describe an efficient algorithm for the numerical construction of periodic Voronoi diagrams, and we report on numerical results which indicate the the fractional step method is convergent of first order. The overall work per time step is proportional to N log N. copyright 1987 Academic Press, Inc

Dam construction impacts on multiscale characterization of sediment discharge in two typical karst watersheds of southwest China

Science.gov (United States)

Li, Zhenwei; Xu, Xianli; Xu, Chaohao; Liu, Meixian; Wang, Kelin

2018-03-01

Southwest China, as one of the largest continuous karst areas in the world, is a severely eroded region due to its special geological condition. Thus, soil and water conservation measures such as dam construction have been extensively implemented in this region to control sediment delivery. However, it remains unclear how dam construction affects multiscale variability of sediment discharge (SD) and its potentially influential factors in southwest China. To assess this, annual SD, water discharge (WD), precipitation (PT), potential evapotranspiration (PET), and normalized differential vegetation index (NDVI) data from 1955 to 2015 were obtained from two karst watersheds of Liujiang (no large dams) and Hongshui (dam-controlled). These sites shared the similar climatic conditions. The Mann-Kendal test, Wilcoxon rank-sum test, and continuous wavelet transform analysis was used to detect the trends and periodicity in SD, and wavelet coherence analysis were employed to detect the temporal covariance between SD and WD, PT, PET, and NDVI. Results indicated that the multiscale variability of SD was strongly influenced by dam construction. The annual SD showed significant 4-year periodic oscillation in the Liujiang watershed, while no significant cycles were found in the Hongshui watershed. Dam construction exerted substantial influence on the multiscale correlations between SD and its associated factors. The time scales that the NDVI resonated with SD were concentrated on the periodicity of 2- and 3-year in the Liujiang watershed. In contrast, no significant periodicities were observed in the Hongshu watershed. This study yields a greater understanding of SD dynamics, and is helpful for better watershed management in karst areas of southwest China.

Photochemical decomposition of perfluorooctanoic acid in aqueous periodate with VUV and UV light irradiation

International Nuclear Information System (INIS)

Cao, M.H.; Wang, B.B.; Yu, H.S.; Wang, L.L.; Yuan, S.H.; Chen, J.

2010-01-01

The photochemical decomposition of perfluorooctanoic acid (PFOA) in aqueous periodate (IO 4 - ) was investigated under two types of low-pressure mercury lamps: one emits at 254 nm light (UV light) and the other emits both 254 nm and 185 nm light (VUV light). PFOA decomposed efficiently under VUV light irradiation while it decomposed poorly under UV light irradiation. The addition of IO 4 - significantly increased the rate of decomposition and defluorination of PFOA irradiated with UV light whereas it decreased both processes under VUV irradiation. Reactive radical (IO 3 ·) generated by photolysis of IO 4 - initiated the oxidation of PFOA in UV process. Aquated electrons (e aq - ), generated from water homolysis, scavenged IO 4 - resulting in decrease of reactive radical species production and PFOA decomposition. The shorter-chain perfluorocarboxylic acids (PFCAs) formed in a stepwise manner from long-chain PFCAs.

[Prediction of the latency period by cervical ultrasonography in premature rupture of the membranes before term].

Science.gov (United States)

Gabriel, R; Morille, C; Drieux, L; Bige, V; Leymarie, F; Quereux, C

2002-11-01

To assess the value of ultrasonographic measurement of cervical length for predicting the duration of the latency period from admission to delivery in women with preterm premature rupture of the membranes (PROM). Prospective study in 88 women with preterm PROM before 34 weeks of amenorrhea. The median gestational age at admission was of 30.1 weeks. The clinical management included: no digital examination of the uterine cervix, antenatal corticosteroids, antibiotics (amoxicillin & clavulanic acid) for 7 days, and hoding back until 34 weeks. Cervical length at admission was determined with transvaginal ultrasonography. The duration of the latency period was studied in relation with cervical length, serum C-reactive protein (CRP) level and white blood cell (WBC) count at admission. The median latency period was longer in women with a cervical length > or = 25 mm (10 vs 5 days; p = 0.04), but this was not associated with a significant increase in birth weight. The median latency period was also longer in women with CRP < 20 mg/l (10 vs 3 days; p < 0.001) and this was associated with a significant increase in birth weight (1716 +/- 549 vs 1201 +/- 485 g; p < 0.01). Moreover, increased CRP levels were more frequent in women with a cervical length < 25 mm, and cervical length was no more predictive of the duration of the latency period in the subgroup of women with CRP < 20 mg/l and WBC < 20,000 cells/mm3. In women with preterm PROM, the latency period from admission to delivery is shorter when cervical length is < 25 mm. However, the clinical value of transvaginal ultrasonography is limited in comparison with serum CRP.