WorldWideScience

Sample records for shop rolling mill

  1. Shear Roll Mill Reactivation

    Science.gov (United States)

    2012-09-13

    pneumatically operated paste dumper and belt conveyor system, the loss in weight feeder system, the hydraulically operated shear roll mill, the pellet...out feed belt conveyor , and the pack out system comprised of the metal detector, scale, and pack out empty and full drum roller conveyors . Page | 4...feed hopper and conveyor supplying the loss in weight feeder were turned on, and it was verified that these items functioned as designed . The

  2. NUMERICAL EVALUATION OF TEMPERATURE DISTRIBUTION IN THE ROLLING MILL ROLLS

    Directory of Open Access Journals (Sweden)

    José Claudino de Lira Júnior

    2013-06-01

    Full Text Available In hot rolling processes occur changes in the profile of the rolling mill rolls (expansion and contraction and constant wear due to mechanical stress and continuous thermal cycles of heating/cooling caused by contact rolled material- working roll and the cooling system by water jets in their surface, decreasing their lifetime. This paper presents a computational model to simulate the thermal performance of rolling mill rolls. The model was developed using the finite volume method for a transient two-dimensional system and allows calculating the temperature distribution of the rolling mill rolls under various conditions of service. Here it is investigated the influence of flow rate and temperature of the cooling water on the temperature distribution. The results show that the water temperature has greater influence than the water flow to control the surface temperature of the cylinders.

  3. Stress and accidental defect detection on rolling mill rolls

    International Nuclear Information System (INIS)

    Auzas, J.-D.

    1999-01-01

    During the rolling mill process, rolls are submitted to high pressures that can lead to local decohesion or metallurgical changes. Both these cracks or softened areas must be detected as soon as they appear because of the risk of spalling, marks on the product, and mill wreck. These defects can be detected using the eddy current method, and particularly sensors specially developed for micro-defects detection. These sensors must be adapted to the environment of a roll grinding machine on which they must be installed. Users' schedule of conditions also require them to be attached to a wide range of eddy current generator and automatic computerized interpretation. Mill requirements for new high tech roll grades and quality lead to continuous development and improvement of the tools that will provide immediate 'go - no go' information. This paper is an update of these developments. (author)

  4. Metallurgical analysis of spalled work roll of hot strip mill

    International Nuclear Information System (INIS)

    Khan, M.M.; Khan, M.A.

    1993-01-01

    In this study failure analysis of four work roll of the Hot Strip Mill is carried out. The microstructure is correlated with the chemical composition of shell and roll-life. It was concluded that for the longer service of the roll, cementite, graphite and martensite should be balanced (as per working requirement of the mill). (author)

  5. MILLING MECHANICS OF MATERIALS ROLLED IN THICK LAYER

    Directory of Open Access Journals (Sweden)

    E. B. Lojechnikov

    2006-01-01

    Full Text Available Powder rolling conditions are systematized with the purpose of their compacting and milling. The generalized  condition of solid and free-flowing bulk material deformation is proposed in the  paper. The analytical solution of a stressed state of powder being shaped mechanically that ensures milling of its particles has been obtained.

  6. Rolling of molybdenum and niobium tubes on cold-rolling mill with high stiff stand

    Energy Technology Data Exchange (ETDEWEB)

    Potapov, I N; Shejkh-Ali, A D; Filimonov, G V; Lunev, A G

    1984-03-01

    To develop the technique of tube production the process of rolling is studied and comparative evaluation of the structure formed is carried out. It is shown that billets of rods deformed by screw rolling have the improved plastic properties and are deformed on cold-rolling mill (CRM) with a high degree of reduction without defect formation. High stiff stand of the CRM permits to produce high-quality molybdenum tubes.

  7. 31. Introduction with adjacent production of foundry and rolling department of electrolysis shop

    International Nuclear Information System (INIS)

    Ivanov, A.V.

    1993-01-01

    The introduction with adjacent production of foundry and rolling department of electrolysis shop was conducted. The foundry machine was described. The chemical properties of aluminium for ferrous alloy production were defined.

  8. Axial Force Analysis and Roll Contour Configuration of Four-High CVC Mill

    Directory of Open Access Journals (Sweden)

    Guang-ming Liu

    2018-01-01

    Full Text Available In order to analyze the influence of technical parameters on work roll axial force of four-high continuous variable crown (CVC mill, the deformation analyzing model with top roll system and strip was established based on influence function method. Then a CVC work roll curve designing scheme was proposed and it was carried out on some cold rolling mill considering the requirement of comprehensive work roll axial force minimization. The status of comprehensive work roll axial force is improved considering the rolling schedule that is beneficial to the roller bearing. Corresponding to the newly designed work roll contour, the backup roll end chamfer was designed considering comprehensive performance of interroll stress concentration, comprehensive work roll axial force, and strip shape control ability. The distribution of roll wear with newly designed backup roll contour is more even according to the field application data. The newly established roll configuration scheme is beneficial to four-high CVC mill.

  9. Dimensional ranges and rolling efficiency in a tandem cold rolling mill

    Energy Technology Data Exchange (ETDEWEB)

    Larkiola, J.

    1997-12-31

    In this work, physical models and a neural network theory have been combined in order to predict the properties of a steel strip and to optimise the process parameters in cold rolling. The prediction of the deformation resistance of the material and the friction parameter is based on the physical model presented by Bland, Ford and Ellis and artificial neural network computing (ANN). The accuracy of these models has been tested and proved by using a large amount of the measured data. With the aid of these models it has been shown that (a) the small change to the relative reduction distribution can have a clear effect upon the rolling efficiency, (b) the dimensional ranges of the tandem cold roll mill can be determined and optimised and (c) the possibility to cold roll a new product of new width, strength or thickness can be determined and the parameters of the tandem cold rolling process can be optimised. (orig.) 43 refs.

  10. Recycle of valuable products from oily cold rolling mill sludge

    Science.gov (United States)

    Liu, Bo; Zhang, Shen-gen; Tian, Jian-jun; Pan, De-an; Liu, Yang; Volinsky, Alex A.

    2013-10-01

    Oily cold rolling mill (CRM) sludge contains lots of iron and alloying elements along with plenty of hazardous organic components, which makes it as an attractive secondary source and an environmental contaminant at the same time. The compound methods of "vacuum distillation + oxidizing roasting" and "vacuum distillation + hydrogen reduction" were employed for the recycle of oily cold rolling mill sludge. First, the sludge was dynamically vacuum distilled in a rotating furnace at 50 r/min and 600°C for 3 h, which removed almost hazardous organic components, obtaining 89.2wt% ferrous resultant. Then, high purity ferric oxide powders (99.2wt%) and reduced iron powders (98.9wt%) were obtained when the distillation residues were oxidized and reduced, respectively. The distillation oil can be used for fuel or chemical feedstock, and the distillation gases can be collected and reused as a fuel.

  11. PERSPECTIVES OF MODERNIZATION OF WIRE MILL OF HOT ROLLING 150 AT RUP “BMZ”

    Directory of Open Access Journals (Sweden)

    A. V. Gontarj

    2004-01-01

    Full Text Available The offered modernization of the mill presumes the increase of capacity of the small-sort wire mill of hot milling 150 approximately till 40% at reduction of cost of the produced on it rolled wire by 15%, that will allow in future as well to grow the volumes of hardware production.

  12. On rolling of alloyed steels on the continuous light-section mill 250

    International Nuclear Information System (INIS)

    Grigor'ev, V.K.; Antipov, V.F.; Zamotin, V.M.; Kuznetsov, Yu.M.

    1976-01-01

    Using the method of computed ratios, the expected loads (torques) have been calculated in the rolling of alloyed steels on the light-section mill 250 of the Chelyabinsk metallurgical works. The deviation of the computed torques from those measured for steels 35GS and St5ps does not exceed -6%. Data are given on changes in torques during the rolling of alloyed steels in the different stands as compared with the actual data for the rolling of ordinary steel. Calculations show, and experimental data confirm, that, according to the torque value, it is possible to roll alloyed steels of sufficiently wide assortment on mill 250

  13. USE OF HIGH SPEED STEEL WORK ROLLS (HSS ON APERAM STECKEL MILL

    Directory of Open Access Journals (Sweden)

    Arísio de Abreu Barbosa

    2013-12-01

    Full Text Available This paper outlines the main actions taken to reinforce the decision to use HSS work rolls on the Aperam Steckel Mill. These are: work roll cooling improvements, systematically analyzing Eddy Current and Ultrasonic non destructive tests, mechanical adjustment of work roll crown and critically examining the rolling process. These actions applied together have contributed to the success of HSS rolls state of the art application, and provide the Steckel Mill with a much improved performance. Significant results have been achieved, such as: increasing of work roll change intervals, increasing of the available production time, a yield gain, a product quality improvement, less working hours needed for the roll grinding operation, etc

  14. PECULIARITIES OF THE FEED TEMPERATURE CHANGING ALONG THE MILL 320 UNE OF RUP "BMZ" AT ROLLING OF REINFORCING PROFILES BY MEANS OF ROLLING-AND-SEPARATION

    Directory of Open Access Journals (Sweden)

    S. M. Zhuchkov

    2006-01-01

    Full Text Available The peculiarities of the temperature changing of the roll along the length of mill at using of new technological schema of production of reinforce rolled metal of small cuts in conditions of RUP are considered.

  15. IMPROVEMENT PROCESS FOR ROLLING MILL THROUGH THE DMAIC SIX SIGMA APPROACH

    Directory of Open Access Journals (Sweden)

    Kunal Ganguly

    2012-09-01

    Full Text Available This project aims to address the problems that are facing a large aluminum company in a Developing Hot Rolling Mill Capabilities for Wider Widths Hard Alloys Rolling and b Eliminate down time due to strip /coil slippage during hard alloys 5xxx rolling at Hot Mill. The challenge for the company was to cater the fast changing export demand for Flat Rolled products with its existing resources. By applying Six Sigma principles, the team identified the current situation that the rolling mills operations were in. Si x Sigma DMAIC methodologies were use d in the project to determine the project's CTQ characteristics, defining the possible causes, Identifying the variation sources, establishing variable relationships and Implementing Control Plans. The project can be useful for any company that needs to fi nd the most cost efficient way to improve and utilize its resources.

  16. Depreciation of bearing blocks of rollers of roller conveyers of rolling mills

    Science.gov (United States)

    Artiukh, Viktor; Belyaev, Michael; Ignatovich, Igor; Miloradova, Nadezda

    2017-10-01

    Essential increase in functional durability of a node of a roller of the roller conveyer of the rolling mill by the rational choice of parameters of the small-size shock-absorber (buffer adapter) is shown. At the same time dimensions of a node don’t change, costs of reconstruction are small. The possibility of management of loadings in a bearing node without change of technology parameters of the process which is carried out by the rolling mill is confirmed.

  17. DEVELOPMENT OF A METHOD OF IMPROVEMENT OF QUALITY OF MILL PRODUCTS AND WEAR RESISTANCE OF THE TOOL AT THE ROLLING MILL 150 JSC «BSW – MANAGING COMPANY OF HOLDING «BMC»

    Directory of Open Access Journals (Sweden)

    I. A. Zuyeu

    2016-01-01

    Full Text Available Enhancement of calibration of mill rolls of the rolling mill 150, to improve of the mill products quality characteristics and to increase efficiency of the whole production is described in the article.

  18. Premature failure analysis of forged cold back-up roll in a continuous tandem mill

    International Nuclear Information System (INIS)

    Rad, Hamid Reza Bakhsheshi; Monshi, Ahmad; Idris, Mohd Hasbullah; Kadir, Mohammed Rafiq Abdul; Jafari, Hassan

    2011-01-01

    Highlights: → Metal wrapping and strip welding in work/back-up rolls contact zone caused spalling. → MnS inclusion and pore initiated crack which propagated in milling led to spalling. → Retained austenite conversion to α'-martensite accelerated spalling failure. → Needle shaped carbide (Fe,Mo,Cr) 7 C 3 , may cause poor service life of back-up roll. -- Abstract: In this paper, premature failure of a forged back-up roll from a continuous tandem mill was investigated. Microstructural evolutions of the spalled specimen and surface of the roll were characterized by optical microscopy, X-ray diffraction, scanning electron microscopy and ferritscopy, while hardness value of the specimen was measured by Vickers hardness testing. The results revealed that the presence of pore and MnS inclusion with spherical and oval morphologies were the main contributing factors responsible for the poor life of the back-up roll. In addition, metal pick up and subsequently strip welding on the surface of the work roll were found as the major causes of failure in work roll which led to spalling occurrence in the back-up roll. Furthermore, relatively high percentage of retained austenite, say 9%, in outer surface of the back-up roll contributed spalling due to conversion of this meta-stable phase to martensite and creation of volume expansion on the outer surface through work hardening during mill campaign.

  19. Rolling process simulation of a pair-crossed hot strip mill

    International Nuclear Information System (INIS)

    Chen Shaojie; Xu Jianzhong; Liu Xianghua; Wang Guodong

    2000-01-01

    Process simulation can help optimize the operating parameters aiming to improve the quality of rolled products. In this paper, software in Visual Basic language is developed to simulate the hot rolling process of a pair-crossed mill. The strip temperature is calculated by considering air cooling, water cooling, heat generation and conduction.The production parameters including rolling speeds, resistance to deformation, rolling forces, drive torques and powers are evaluated by mathematical models and their parameter identification support tools. The deformation of roll stack is calculated by influential function method. The roll temperature and expansion are calculated by finite differential method, and the roll wear is described by empirical formula. Based on these calculations as well as the effect of heredity is taken into account, the strip crown and flatness then can be obtained. The results show that the simulation software has friendly user interface, high accuracy and practicability. It can be served as a basis for the mill design and optimization of process parameters to acquire high quality of hot rolled strip. (author)

  20. Force prediction in cold rolling mills by polynomial methods

    Directory of Open Access Journals (Sweden)

    Nicu ROMAN

    2007-12-01

    Full Text Available A method for steel and aluminium strip thickness control is provided including a new technique for predictive rolling force estimation method by statistic model based on polynomial techniques.

  1. Soil Contamination with Heavy Metals around Jinja Steel Rolling Mills in Jinja Municipality, Uganda

    Directory of Open Access Journals (Sweden)

    Noel Namuhani

    2015-01-01

    Conclusions. The concentration levels of heavy metals around the steel rolling mills did not appear to be of serious concern, except for copper and cadmium, which showed moderate pollution and moderate to strong pollution, respectively. All heavy metals were within the limits of the United States Environmental Protection Agency (USEPA residential soil standards and the Dutch intervention soil standards. Overall, soils around the Jinja steel rolling mills were slightly polluted with heavy metals, and measures therefore need to be taken to prevent further soil contamination with heavy metals.

  2. Numerical simulation study on rolling-chemical milling process of aluminum-lithium alloy skin panel

    Science.gov (United States)

    Huang, Z. B.; Sun, Z. G.; Sun, X. F.; Li, X. Q.

    2017-09-01

    Single curvature parts such as aircraft fuselage skin panels are usually manufactured by rolling-chemical milling process, which is usually faced with the problem of geometric accuracy caused by springback. In most cases, the methods of manual adjustment and multiple roll bending are used to control or eliminate the springback. However, these methods can cause the increase of product cost and cycle, and lead to material performance degradation. Therefore, it is of significance to precisely control the springback of rolling-chemical milling process. In this paper, using the method of experiment and numerical simulation on rolling-chemical milling process, the simulation model for rolling-chemical milling process of 2060-T8 aluminum-lithium alloy skin was established and testified by the comparison between numerical simulation and experiment results for the validity. Then, based on the numerical simulation model, the relative technological parameters which influence on the curvature of the skin panel were analyzed. Finally, the prediction of springback and the compensation can be realized by controlling the process parameters.

  3. Analysis of Startup Process and Its Optimization for a Two-Stand Reversible Cold Rolling Mill

    Directory of Open Access Journals (Sweden)

    Guangming Liu

    2017-01-01

    Full Text Available Dynamic characteristic analysis of a two-stand reversible cold rolling mill in the startup process was carried out. The delay algorithm of the interstand thickness was proposed. A new method combined with the accelerated secant and the tangent methods was established to solve the simultaneous equations. The thickness and interstand tension transition processes with different static tension establishing processes were analyzed. Both mills were operated under constant rolling force control mode in the above process. The results show that the strip thickness in the rolling gap reduces in the static mill screwdown process. The entry stand runs inversely to establish the static interstand tension. This area becomes an abnormal thickness reduction area of the incoming strip. It results in several abnormal interstand tension increases in the subsequent startup process. The tension increase leads to an impact force on the strip that is the main reason of the strip breakage in the startup process. So the static tension establishing process was optimized, and the interstand tension fluctuation and the strip breakage accidents both reduced significantly. The results are beneficial to the startup process of the two-stand reversible cold rolling mill.

  4. Wire Finishing Mill Rolling Bearing Fault Diagnosis Based on Feature Extraction and BP Neural Network

    Directory of Open Access Journals (Sweden)

    Hong-Yu LIU

    2014-10-01

    Full Text Available Rolling bearing is main part of rotary machine. It is frail section of rotary machine. Its running status affects entire mechanical equipment system performance directly. Vibration acceleration signals of the third finishing mill of Anshan Steel and Iron Group wire plant were collected in this paper. Fourier analysis, power spectrum analysis and wavelet transform were made on collected signals. Frequency domain feature extraction and wavelet transform feature extraction were made on collected signals. BP neural network fault diagnosis model was adopted. Frequency domain feature values and wavelet transform feature values were treated as neural network input values. Various typical fault models were treated as neural network output values. Corresponding relations between feature vector and fault omen were utilized. BP neural network model of typical wire plant finishing mill rolling bearing fault was constructed by training many groups sample data. After inputting sample needed to be diagnosed, wire plant finishing mill rolling bearing fault can be diagnosed. This research has important practical significance on enhancing rolling bearing fault diagnosis precision, repairing rolling bearing duly, decreasing stop time, enhancing equipment running efficiency and enhancing economic benefits.

  5. Calculation and experimental technique of determination of rolling procedure for cold-rolling tube mills

    International Nuclear Information System (INIS)

    Igoshin, V.F.; Aleshin, V.A.; Khoroshikh, Yu.G.; Bogatov, A.A.; Mizhiritskij, O.I.

    1983-01-01

    Calculation and experimental technique of determination of tube cold rolling procedure has been developed. Rolling procedure based on the usage of regression equation epsilon=1.24 psi, where psi is the relative reduction of area, delta-permissible reduction during rolling, has been tested on 08Kh18N10T steel. The effect of tube geometry, tool calibration parameters, lubrication conditions etc. on metal deformability in taking into account experimentally. The use of the technique proposed has allowed to shorten the time of mastering of the production of tubes from different steels

  6. Heavy metals adsorption on rolling mill scale; Adsorcion de metales pesados sobre cascarill de laminacion

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, F. A.; Martin, M. I.; Perez, C.; Lopez-Delgado, A.; Alguacil, E. J.

    2003-07-01

    A great quantity of industries are responsible for contaminating the environment with the heavy metals which are containing in their wastewaters. The recovery of these metals is both from an environmental and economical points of view of the upmost interest. A study is made of the use of mill scale-originating in the hot rolling of steel-as an adsorbent for the removal of heavy metals from liquid effluents. The adsorption of Zn''2+, Cd''2+ y Pb''2+ on the rolling mill scale was investigated by determination of adsorption isotherms. The effect of time, equilibrium temperature and concentration of metal solution on mill scale adsorption efficiency was evaluated. The adsorption process was analysed using the theories of Langmuir and Freundlich. Desorption process of metals from loaded mill scales was also studied using several doser bent at different experimental conditions. It has been proved that the mill scale is an effective adsorbent for the cations studies in aqueous solutions within the range of the working concentrations. (Author) 32 refs.

  7. Influence of the Radiation Shield on the Temperature of Rails Rolled in the Reversing Mill

    Directory of Open Access Journals (Sweden)

    Gołdasz A.

    2015-04-01

    Full Text Available The paper presents a mathematical model of heat transfer during cooling of hot-rolled rails in the reversing mill. The influence of the radiation shield on the temperature of rolled rails has been analyzed. The heat transfer model for cooling a strip covered by the thermal shield has been presented. The two types of shields build of steel and aluminum sheets separated with insulating layer have been studded. Calculations have been performed with self developed software which utilizes the finite element method.

  8. STUDY OF THE flat die pellet mills kinematic diagram with active cylindrical press rolLS

    Directory of Open Access Journals (Sweden)

    Osokin Anton Vladislavovich

    2017-03-01

    Full Text Available Though being widely spread, the designs of such machines as flat die pellet mills have hardly been comprehensively theoretically studied. At the same time, the kinematic motion of the ring die pellet mill executive parts have been studied quite thoroughly. The machine executive parts kinematics determines the nature of their motion and velocity parameters, as well as the energy costs for the unit operation of the assembly. In addition, a detailed analysis of the facility kinematic diagram enables a rational approach to the design process for a new equipment. In view of this, this paper proposes a classification of flat matrix granulators over the kinematic diagrams of the executive parts interactions. We performed an analytical study of the kinematic diagram flat matrix granulator with active cylindrical press rolls. We considered the forces acting on the press roll during its operation. We determined the kinematic parameters and their interrelation with the design parameters of the press roll. We obtained the analytical equations for the of the neutral cross-section determination - the most characteristic section of the press-roll granulator

  9. Research upon the quality assurance of the rolling-mill rolls and the variation boundaries of the chemical composition

    Directory of Open Access Journals (Sweden)

    Kiss, I.

    2008-08-01

    Full Text Available The cast-iron rolls must present higher hardness at the rolling surface and lower in the core and the necks, adequate with mechanical resistance and in the high work temperature. If in the zone of the rolling surface, the hardness is guarantied by the irons structure, through the cementite quantities, the core of rolls must contain graphite, to assure this property. Starting from the lamination equipments aspects, from the form of rolls, of the technological interest zones and the structure, which assures the exploitation property, it was establish, through modeling, to the mathematical description of a direct influences, and in final, through successive determinations, to an optimum. One of the parameters, which are determined the structure of the irons destined for rolls casting, is the chemical composition, which guaranties the exploitation properties of the each roll in the stand of rolling mill. The realization of optimum chemical compositions of the cast-iron can constitute a technical efficient way to assure the exploitation properties, the material from which the rolling mills rolls are manufactured having an important role in this sense. Although the manufacture of rolls is in continuously perfecting, the requirements for superior quality rolls are not yet completely satisfied, in many cases, the absence of quality rolls preventing the realization of quality laminates or the realization of productivities of which rolling mills are capable. This paper presents an analysis of the main alloying elements from chemical composition, the influences upon the mechanical properties of the cast-iron rolls, and presents also some graphical addenda. Using the Matlab calculation and graphical programs we determinate some correlations between the hardness (on the working surface and on necks and the chemical composition. Using the double and triple correlations is really helpful in the foundry practice, as it allows us to determine variation

  10. Simulation of accelerated strip cooling on the hot rolling mill run-out roller table

    International Nuclear Information System (INIS)

    Muhin, U.; Belskij, S.; Makarov, E.; Koinov, T.

    2013-01-01

    Full text: A mathematical model of the thermal state of the metal on the run-out roller table of a continuous wide hot-strip mill is presented. The mathematical model takes into account the heat generation during the polymorphic γ → α transformation of super cooled austenite phase and the influence of chemical composition on the physical properties of the steel. The model allows the calculation of modes of accelerated cooling of strips on the run-out roller table of a continuous wide hot strip mill. Winding temperature calculation error does not exceed 20 °C for 98.5 % of the strips from low-carbon and low-alloyed steels. key words: hot rolled, wide-strip, accelerated cooling, run-out roller table, polymorphic transformation, mathematical modeling

  11. A model for prediction of profile and flatness of hot and cold rolled flat products in four-high mills

    Science.gov (United States)

    Overhagen, Christian; Mauk, Paul Josef

    2018-05-01

    For flat rolled products, the thickness profile in the transversal direction is one of the most important product properties. For further processing, a defined crown of the product is necessary. In the rolling process, several mechanical and thermal influences interact with each other to form the strip shape at the roll gap exit. In the present analysis, a process model for rolling of strip and sheet is presented. The core feature of the process model is a two-dimensional stress distribution model based on von Karman's differential equation. Sub models for the mechanical influences of work roll flattening as well as work and backup roll deflection and the thermal influence of work roll expansion have been developed or extended. The two-dimensional stress distribution serves as an input parameter for the roll deformation models. For work roll flattening, a three-dimensional model based on the Boussinesq problem is adopted, while the work and backup roll deflection, including contact flattening is calculated by means of finite beam elements. The thermal work roll crown is calculated with help of an axisymmetric numerical solution of the heat equation for the work roll, considering azimuthal averaging for the boundary conditions at the work roll surface. Results are presented for hot rolling of a strip in a seven-stand finishing train of a hot strip mill, showing the calculated evolution of the strip profile. A variation of the strip profile from the first to the 20th rolled strip is shown. This variation is addressed to the progressive increase of work roll temperature during the first 20 strips. It is shown that a CVC® system can lead to improvements in strip profile and therefore flatness.

  12. Rolling of bars and sections of fire-resisting metals on mills with noulti-shaft calibers

    International Nuclear Information System (INIS)

    Vydrin, V.N.; Barkov, L.A.; Pastukhov, V.V.; Matveev, V.A.; Mebel', V.S.; Korneev, L.I.

    1976-01-01

    Summarized in this paper are the results of experimental studies and rolling of rods and sections from metal-ceramic and cest molybdenum and tungsten. The technical characteristics of the new MK-200 laboratory mill are given together with the calibaration scheme of tungsten and molybdenum rods

  13. New technology for recycling materials from oily cold rolling mill sludge

    Institute of Scientific and Technical Information of China (English)

    Bo Liu; Shen-gen Zhang; Jian-jun Tian; De-an Pan; Ling Meng; Yang Liu

    2013-01-01

    Oily cold rolling mill (CRM) sludge is one of metallurgical industry solid wastes. The recycle of these wastes can not only protect the environment but also permit their reutilization. In this research, a new process of“hydrometallurgical treatment+hydrothermal synthesis”was investigated for the combined recovery of iron and organic materials from oily CRM sludge. Hydrometallurgical treatment, mainly including acid leaching, centrifugal separation, neutralization reaction, oxidizing, and preparation of hydrothermal reaction precursor, was first utilized for processing the sludge. Then, micaceous iron oxide (MIO) pigment powders were prepared through hydrothermal reaction of the obtained precursor in alkaline media. The separated organic materials can be used for fuel or chemical feedstock. The quality of the prepared MIO pigments is in accordance with the standards of MIO pigments for paints (ISO 10601-2007). This clean, eff ective, and economical technology off ers a new way to recycle oily CRM sludge.

  14. Transport, mixing and stretching in a chaotic Stokes flow: The two-roll mill

    International Nuclear Information System (INIS)

    Kaper, T.J.; Wiggins, S.

    1989-01-01

    We present the outline and preliminary results of an analytical and numerical study of transport, mixing, and stretching in a chaotic Stokes' flow in a two-roll mill apparatus. We use the theory of dynamical systems to describe the rich behavior and structure exhibited by these flows. The main features are the homoclinic tangle which functions as the backbone of the chaotic mixing region, the Smale horseshoe, and the island chains. We then use our detailed knowledge of these structures to develop a theory of transport and stretching of fluid in the chaotic regime. In particular, we show how a specific set of tools for adiabatic chaos- the adiabatic Melnikov function lobe area and flux computations and the adiabatic switching method is ideally suited to develop this theory of transport, mixing and stretching in time-dependent two-dimensional Stokes' flows. 19 refs., 8 figs

  15. Effect of Stiffness of Rolling Joints on the Dynamic Characteristic of Ball Screw Feed Systems in a Milling Machine

    Directory of Open Access Journals (Sweden)

    Dazhong Wang

    2015-01-01

    Full Text Available Dynamic characteristic of ball screw feed system in a milling machine is studied numerically in this work. In order to avoid the difficulty in determining the stiffness of rolling joints theoretically, a dynamic modeling method for analyzing the feed system is discussed, and a stiffness calculation method of the rolling joints is proposed based on the Hertz contact theory. Taking a 3-axis computer numerical control (CNC milling machine set ermined as a research object, the stiffness of its fixed joint between the column and the body together with the stiffness parameters of the rolling joints is evaluated according to the Takashi Yoshimura method. Then, a finite element (FE model is established for the machine tool. The correctness of the FE model and the stiffness calculation method of the rolling joints are validated by theoretical and experimental modal analysis results of the machine tool’s workbench. Under the two modeling methods of joints incorporating the stiffness parameters and rigid connection, a theoretical modal analysis is conducted for the CNC milling machine. The natural frequencies and modal shapes reveal that the joints’ dynamic characteristic has an important influence on the dynamic performance of a whole machine tool, especially for the case with natural frequency and higher modes.

  16. An Online Fault Pre-warning System of the Rolling Mill Screw-down Device Based on Virtual Instrument

    Directory of Open Access Journals (Sweden)

    Qing Bai

    2014-04-01

    Full Text Available A traditional off-line screw-down monitoring system performs not well on real-time signal analysis or process, which cannot provide simultaneous fault pre-warning either. A diagnostic monitoring system as well as a remotely accessible graphic user interface is presented in this paper. The main objective of this work is to develop an online and available technique for monitoring the kinetic, hydrodynamic and electrical parameters of the rolling mill screw-down device, and analyze these figures to support online fault pre-warning. A series of transducers are installed in suitable locations to measure parameters decried above including the vibration acceleration of a rolling mill stand, the rolling force of a screw-down device, the stroke of a hydraulic cylinder, the system source pressure, the in-cylinder stress and the output value of an electro-hydraulic servo valve. An industrial personal computer picks up the information transformed by an extra high-speed data acquisition board embedded inside, processes the signals via a software designed by means of Laborary Virtual Instrument Engineering Workbench (LabVIEW and indicates fault conditions through the graphic user interface. Besides, the data of the overall system can be published over the Internet using LabVIEW Web Server capabilities. The results of experiments suggest that the system works well on real-time data acquisition and online fault pre- warning. The statistics saved contributes to the research of vibration performance and malfunction analysis of a rolling mill.

  17. Hvilken rolle spiller hybrid shopping i kundereisen ved kjøp av kosmetikk?

    OpenAIRE

    Varem, Andrea; Nervik, Lene

    2017-01-01

    Temaet for denne bacheloroppgaven er hybrid shopping i kundereisen ved kjøp av kosmetikk. Etter en omfattende gjennomgang av eksisterende teori rundt kundereisen fikk vi et inntrykk av at det er et gap i forskningen knyttet til kundereisen ved kjøp av kosmetikk, på tross av størrelsen på dette markedet. Det vi fant av teori på feltet var i stor grad basert på kvantitative undersøkelser, og vi ønsker derfor å belyse kundereisen i denne konteksten gjennom et kvalitativt forskningsdesign. Med ut...

  18. Evaluation of residual uranium contamination in the dirt floor of an abandoned metal rolling mill.

    Science.gov (United States)

    Glassford, Eric; Spitz, Henry; Lobaugh, Megan; Spitler, Grant; Succop, Paul; Rice, Carol

    2013-02-01

    A single, large, bulk sample of uranium-contaminated material from the dirt floor of an abandoned metal rolling mill was separated into different types and sizes of aliquots to simulate samples that would be collected during site remediation. The facility rolled approximately 11,000 tons of hot-forged ingots of uranium metal approximately 60 y ago, and it has not been used since that time. Thirty small mass (≈ 0.7 g) and 15 large mass (≈ 70 g) samples were prepared from the heterogeneously contaminated bulk material to determine how measurements of the uranium contamination vary with sample size. Aliquots of bulk material were also resuspended in an exposure chamber to produce six samples of respirable particles that were obtained using a cascade impactor. Samples of removable surface contamination were collected by wiping 100 cm of the interior surfaces of the exposure chamber with 47-mm-diameter fiber filters. Uranium contamination in each of the samples was measured directly using high-resolution gamma ray spectrometry. As expected, results for isotopic uranium (i.e., U and U) measured with the large-mass and small-mass samples are significantly different (p 0.05) from results for the large- or small-mass samples. Large-mass samples are more reliable for characterizing heterogeneously distributed radiological contamination than small-mass samples since they exhibit the least variation compared to the mean. Thus, samples should be sufficiently large in mass to insure that the results are truly representative of the heterogeneously distributed uranium contamination present at the facility. Monitoring exposure of workers and the public as a result of uranium contamination resuspended during site remediation should be evaluated using samples of sufficient size and type to accommodate the heterogeneous distribution of uranium in the bulk material.

  19. Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

    International Nuclear Information System (INIS)

    Schmidtchen, M; Kawalla, R; Rimnac, A; Bragin, S; Linzer, B; Warczok, P; Kozeschnik, E; Bernhard, C

    2016-01-01

    The newly developed LaySiMS simulation tool provides new insight for inhomogeneous material flow and microstructure evolution in an endless strip production (ESP) plant. A deepened understanding of the influence of inhomogeneities in initial material state, temperature profile and material flow and their impact on the finished product can be reached e.g. by allowing for variable layer thickness distributions in the roll gap. Coupling temperature, deformation work and work hardening/recrystallization phenomena accounts for covering important effects in the roll gap. The underlying concept of the LaySiMS approach will be outlined and new insight gained regarding microstructural evolution, shear and inhomogeneous stress and strain states in the roll gap as well as local residual stresses will be presented. For the case of thin slab casting and direct rolling (TSDR) the interrelation of inhomogeneous initial state, micro structure evolution and dissolution state of micro alloying elements within the roughing section of an ESP line will be discussed. Special emphasis is put on the influence of the local chemical composition arising from direct charging on throughthickness homogeneity of the final product. It is concluded that, due to the specific combination of large reductions in the high reduction mills (HRM) and the highly inhomogeneous inverse temperature profile, the ESP-concept provides great opportunities for homogenizing the microstructure across the strip thickness. (paper)

  20. INFLUENCE OF CONFIGURATION OF EQUIPMENT OF A HIGH-SPEED ROD MILL ON QUALITATIVE CHARACTERISTICS OF HIGH-CARBON ROLLED WIRE

    Directory of Open Access Journals (Sweden)

    V. A. Lutsenko

    2011-01-01

    Full Text Available The quality of output production has increased in the result of new arrangement of finishing train of block construction of rod mill of RUP «BMZ». Additional using in rolled line of reducing-sizing block at production of high- carbon rolled wire enabled to reduce the dispersion of mechanical characteristics, to decrease the depth of decarburized layer.

  1. EXPERIMENTAL STUDY OF THE DYNAMICS OF CENTRIFUGAL CASTING MACHINES FOR PRODUCTION OF MILL ROLLS

    Directory of Open Access Journals (Sweden)

    P. G. Anofriev

    2017-06-01

    Full Text Available Purpose. The main purpose of experimental studies is to establish the adequacy of the developed mathematical models of machine fluctuations and the actual parameters of machine vibration. Almost all casting machines for the production of mill rolls have a unique design and performances. The additional aim of this work is to compare the vibration level of the casting machine with the requirements of the current vibration standards for new technological machines. Frequency analysis of the oscillations allows establishing defects in workmanship, errors of rotating parts installation and their influence on the dynamics of the machine. Methodology. Measurement of vibration parameters was performed on the moving parts of roller bearings of the machine. To measure the amplitudes of accelerations in three mutually perpendicular directions piezoelectric sensors with magnetic mount were used. Electrical signals from the sensors were recorded on magnetic tape. Further analysis of the oscillations was carried out and visualized using specialized frequency analyzer. The frequency analyzer implements the algorithm of fast Fourier transformation and/or integration of sensor input signal. After the first integration the data for plotting the vibration velocity spectrogram were obtained and as a result of the second integration there are the data of vibration displacements spectrogram of the machine supports. Findings. The results of experimental studies of centrifugal casting machine vibrations for the production of two-layer rolls were presented. There were obtained and analyzed the spectrograms of accelerations, velocities and displacements of moving parts of the upper and lower roller supports. The work of the machine is associated with the calculated values passing of critical frequencies and the short-term development of resonance oscillations of the rotor and roller bearings. Originality. For the first time the author obtained the frequency spectra of

  2. Influence of structure and properties of tubular billets of the 12 Kh 18N10T steel on deformability of tubes at cold-rolling mills

    International Nuclear Information System (INIS)

    Vil'yams, O.S.; Bol'shova, N.M.; Olejnik, O.V.; Velikotnaya, E.S.

    1979-01-01

    Metallographic analysis of the defects of the ''oblique cracks'' type on the surface of hot-rolled tubes of the 12Kh18N10T steel has been carried out. Recommended is the complex of mechanical properties and the structure factors (grain size) of conversion hot-rolled tubes, providing the combination of ductility and high rapture strength during rolling at pilger mills. At a grain size not coarser than number 5, a billet must have σsub(T) 5 >=40 %. Hot-rolled coarse-grained billet is not recommended for warm rolng because of high strain hardening

  3. Analysis and development of the method for calculating calibration of the working plank in the cold tube roller rolling mills

    Directory of Open Access Journals (Sweden)

    S. V. Pilipenko

    2017-05-01

    Full Text Available Analysis and development of the existing method of calculation of the calibrated profile of the working strips mills CTRR roller cold rolling pipe to ensure the required distribution of energy-power parameters along the cone. In presented paper, which has for aim the development of existing method for calculating the profile of calibrated working plank in the cold tube roller rolling mills, the analysis had been made and it was proposed to use Besier-lines while building the the profile of the plank working surface. It was established that the use of Besier spline-curve for calculating the calibration of supporting planks creates the possibility to calculate the parameters proceeding from reduction over the external diameter. The proposed method for calculating deformation parameters in CTRR mills is the result of development of existing method and as such shows the scientific novelty. Comparison of the plots for distribution of the force parameters of the CTRR process along the cone of deformation presents as evidence the advantage of the method to be proposed. The decrease of reduction value at the end of deformation zone favors the manufacture of tubes with lesser wall thickness deviation (especially longitudinal one, caused with waviness induced by the cold pilgering process. Joined the further development of the method of calculating the deformation parameters CTRR. It is proposed for the calculation of the calibration work surface support bracket mills CTRR to use a spline Bezier. The practical significance of the proposed method consists in the fact that calculation of all zones of the plank by means of one dependence allows simplifying the process of manufacturing the latter in machines with programmed numerical control. In this case the change of reduction parameters over the thickness of the wall will not exert the considerable influence on the character of the force parameters (the character and not the value distribution along the

  4. Service behaviour of high speed steel rolling rolls used in hot strip mills; Comportamiento en servicio de los aceros rapidos utilizados en la fabricacion de los cilindros de trabajo de los trenes de bandas en caliente

    Energy Technology Data Exchange (ETDEWEB)

    Ziadi, A.; Belzunce, F. J.; Rodriguez, C.; Fernandez, I.

    2005-07-01

    Work rolls used in hot strip mills may be able to carry out severe actions: very high thermal stresses and wear, along with mechanical stresses due to normal rolling loads, which develop in the presence of cracks, produced by the former actions. The microstructure and the mechanical behaviour (strength and toughness) of high speed steels, which recently have been introduced in this applications, were studied in this work in comparison with high chromium cast irons. (Author) 7 refs.

  5. Maintenance strategy for tilting table of rolling mill based on reliability considerations

    International Nuclear Information System (INIS)

    Deshpande, V.S.; Modak, J.P.

    2003-01-01

    Reliability centred maintenance (RCM) is a new strategic framework for ensuring that any asset continues to perform, as its users want it to perform. RCM is a process used to determine the maintenance requirement of any physical asset in its operating context. RCM process entails asking seven questions about each of the selected assets. It makes use of two documents namely, RCM information worksheet and RCM decision worksheet. RCM decision diagram integrates all the decision processes into a single strategic framework. RCM concept developed by US commercial airlines industry has been successfully implemented by Military, Navy, Nuclear power plants, electric power generation and distribution undertakings and several other sectors. These projects have been carried out in the United Kingdom, The Republic of Ireland, the United States, Hong Kong, Australia, Spain and Singapore. The fact that people has enthusiastically received RCM at all levels and has enabled users to achieve some remarkable successes in all of these countries, suggests that it can be universally employed. Literature review indicates that RCM approach is not conventionally applied in process industries in India. Presently, predictive maintenance (PDM) approach along with conventional preventive maintenance is used in continuous/process industries. This approach if implemented in totality will increase the production cost to a large degree and make the production uneconomical. Similarly breakdown maintenance (BDM) approach cannot be applied in such industries as each breakdown involves huge costs. RCM approach is a compromise between PDM and BDM approach for optimising the cost and ensuring the availability of machine. The RCM approach has been applied to the tilting table system of rolling mill for the research work reported in this paper. In the present study, preventive maintenance tasks suggested for power transmission subsystem, guiding and transportation subsystem and hydraulic subsystem in

  6. Simulation of accelerated strip cooling on the hot rolling mill run-out roller table

    Directory of Open Access Journals (Sweden)

    E.Makarov

    2016-07-01

    Full Text Available A mathematical model of the thermal state of the metal in the run-out roller table continuous wide hot strip mill. The mathematical model takes into account heat generation due to the polymorphic γ → α transformation of supercooled austenite phase state and the influence of the chemical composition of the steel on the physical properties of the metal. The model allows calculation of modes of accelerated cooling strips on run-out roller table continuous wide hot strip mill. Winding temperature calculation error does not exceed 20°C for 98.5 % of strips of low-carbon and low-alloy steels

  7. Assessment of Air Pollution and its Effects on Health of Workers of Steel Re-Rolling Mills in Hyderabad

    Directory of Open Access Journals (Sweden)

    Altaf Alam Noonari

    2016-04-01

    Full Text Available The SRRMs (Steel Re-Rolling Mills are being releasing air pollutants in the environment. In order to evaluate their effect on the health of the workers, health and safety issues were analyzed by first measuring the concentrations of SO x (OIxides of Sulphur, NO x (Oxides of Nitrogen, CO (Carbon Monoxide and O2 (Oxygen produced in the three SRRMs located in SITE area Hyderabad. The mean concentration of SO x , NO x and CO were in the order of 0.35, 0.280, 6.333 ppm, respectively, whereas the mean concentration of O 2 was 203.53 thousand ppm. As per results, the concentration ofair pollutants, including SOx and NO x were significantly higher than to the NEQS (National Environmental Quality Standards and NAAQS (National Ambient Air Quality Standards. The concentration ofCO was lower than to the NAAQS, but higher than to the NEQs, while the concentration of O2 was slightly lower than to the standard value. The workers who were exposed to these air pollutants are being suffering from chronic diseases related to breathing and allergies. Moreover, labour staff was lifting heavy loads manually, which causes them to muscular and joint problems. In all the SRRMs under study, the electrical and mechanical equipments were used without any safety. The MSDS were not displayed on the workstations, the housekeeping was inadequate and most of the workers were performing their jobs without personal protective equipment. In addition to these, the other serious issues related to the occupational health and safety were an unhygienic supply of water, higher noise level, placement of explosive cylinders in the open atmosphere and unavailability of the first aid facilities in the Mill premises.

  8. Performance ceramic red mass containing mill scale of rolling in different firing temperatures

    International Nuclear Information System (INIS)

    Meller, J.G.; Arnt, A.B.C; Rocha, M.R.

    2014-01-01

    This study aimed to evaluate the performance of the properties of samples of red clay with addition of mill scale steel. This residue consists of oxides of iron has the function replace pigments used in ceramic materials. The mechanical strength of the sintered material can be associated with reactions that occur during sintering, leading to the formation of compounds provided with good mechanical characteristics, particle size of the components and the structure of the dough piece after the compactation. After chemical and microstructural characterization diffraction and fluorescence X-rays, this residue was added in the proportion of 1.45% of a commercial ceramic mass. The formulations were subjected to different temperatures and performance of the formulations was evaluated for physical characteristics: loss on ignition, linear firing shrinkage, water absorption, flexural strength by 3 and intensity of tone. The loss on ignition and linear firing shrinkage tests relate to the sintering temperature with the performance of the tested formulations. (author)

  9. AISI/DOE Advanced Process Control Program Vol. 3 of 6: MICROSTRUCTURAL ENGINEERING IN HOT-STRIP MILLS Part 2 of 2: Constitutive Behavior Modeling of Steels Under Hot-Rolling Conditions; FINAL

    International Nuclear Information System (INIS)

    Yi-Wen Cheng; Patrick Purtscher

    1999-01-01

    This report describes the development of models for predicting (1) constitutive behaviors and (2) mechanical properties of hot-rolled steels as functions of chemical composition, microstructural features, and processing variables. The study includes the following eight steels: A36, DQSK, HSLA-V, HSLA-Nb, HSLA-50/Ti-Nb, and two interstitial-free (IF) grades. These developed models have been integrated into the Hot-Strip Mill Model (HSMM), which simulates the hot strip rolling mills and predicts the mechanical properties of hot-rolled products. The HSMM model has been developed by the University of British Columbia-Canada as a part of project on the microstructural engineering in hot-strip mills

  10. Planejamento e controle da produção de cilindros para laminação: um estudo de caso quantitativo Production management of rolling mill rolls: a quantitative study case

    Directory of Open Access Journals (Sweden)

    Laerte José Fernandes

    2012-01-01

    Full Text Available Este trabalho apresenta um modelo de otimização-simulação aplicado em um estudo de caso real no setor de cilindros para laminação de uma siderúrgica, buscando melhorar o gerenciamento da área/equipamento gargalo da linha de produção. A simulação atuou em conjunto com um modelo de otimização da programação linear inteira (PLI para melhorar o atendimento de prazo junto aos clientes em uma produção não seriada. Como resultado deste procedimento combinado da PLI e simulação, o processo produtivo foi otimizado e as filas de espera e o lead-time foram reduzidos, melhorando o atendimento aos clientes.This article presents a simulation-optimization model application for a real case study in the rolling mill roll sector of a steel plant. The purpose of this study was to get a better area/equipment bottleneck management in the production line. The simulation was used together with an ILP (Integer Linear Programming optimization model, in order to improve customer service in a made-to-order production. As a result of this ILP and Simulation combined approach, the productive process was optimized and both queues and lead-time were reduced, improving customer service.

  11. Planejamento e controle da produção de cilindros para laminação: um estudo de caso quantitativo Production management of rolling mill rolls: a quantitative study case

    Directory of Open Access Journals (Sweden)

    Laerte José Fernandes

    2013-03-01

    Full Text Available Este trabalho apresenta um modelo de otimização-simulação aplicado em um estudo de caso real no setor de cilindros para laminação de uma siderúrgica, buscando melhorar o gerenciamento da área/equipamento gargalo da linha de produção. A simulação atuou em conjunto com um modelo de otimização da programação linear inteira (PLI para melhorar o atendimento de prazo junto aos clientes em uma produção não seriada. Como resultado deste procedimento combinado da PLI e simulação, o processo produtivo foi otimizado e as filas de espera e o lead-time foram reduzidos, melhorando o atendimento aos clientes.This article presents a simulation-optimization model application for a real case study in the rolling mill roll sector of a steel plant. The purpose of this study was to get a better area/equipment bottleneck management in the production line. The simulation was used together with an ILP (Integer Linear Programming optimization model, in order to improve customer service in a made-to-order production. As a result of this ILP and Simulation combined approach, the productive process was optimized and both queues and lead-time were reduced, improving customer service.

  12. Application research of ferrous matrix composites in roller ring used in high-speed wire/bar rolling mill

    International Nuclear Information System (INIS)

    Song Yanpei; Li Xiuqing; Bi Shuangxu

    2010-01-01

    Research highlights: → A composite structure roller rings was fabricated by centrifugal casting. → The roller rings consisted of outer WCP/Fe-C composites layer and inner Fe-C alloy matrix. → Hardness attained to HRA80-85 in the composites layer, and HRA73-76 in inner Fe-C alloy matrix where the toughness was over 8 J/cm 2 . → The wear resistance of the roller rings excelled that of high-speed steel, and approached to that of the WC hard alloy roll. → The production cost of the WCP/Fe-C composites roller ring decreased by 50%. - Abstract: Tungsten carbide particle (WC P ) reinforced ferrous matrix composites roller rings were fabricated by centrifugal casting. The microstructures, properties and application effect of the composites roller rings were investigated by SEM, TEM and various property testers. The experimental results show that the WC P were uniformly distributed in outer reinforced-layer (working-layer) of 20-50 mm in thickness and their volume fraction reached 60-80 vol.%; there was a good interface bonding between WC P and Fe-C alloy without any reaction products; hardness attained to HRA80-85 in working-layer, and HRA73-76 in inner ferrous matrix where the toughness was over 8 J/cm 2 ; the wear resistance of the composites roller rings excels that of high-speed steel; service life of the composites parts approached to that of the WC hard alloy roll when the same WC P -volume-fraction in working-layer were obtained for both of them, but the production cost of the WC P /Fe-C composites roller ring decreased by 50%.

  13. Study on anaerobic treatment of hazardous steel-mill waste rolling oil (SmWRO) for multi-benefit disposal route.

    Science.gov (United States)

    Ma, Huanhuan; Li, Zifu; Yin, Fubin; Kao, William; Yin, Yi; Bai, Xiaofeng

    2014-01-01

    Steel-mill waste rolling oil (SmWRO) is considered as hazardous substance with high treatment and disposal fees. Anaerobic process could not only transform the hazardous substance into activated sludge, but also generate valuable biogas. This study aimed at studying the biochemical methane potential of SmWRO under inoculum to substrate VS ratios (ISRs) of 0.25, 0.5, 1, 1.5, 2 and 3 using septic tank sludge as inoculum in mesophilic and thermophilic conditions, with blank tests for control. Specific biogas yield (mL/g VS(added)), net biogas yield (mL/g VS(removed)) and VS removal were analyzed. The ANOVA results indicated great influence of ISR and temperature on studied parameters. ISR of 1.5 at 55°C and ISR of 1.5 and 2 at 35°C were suggested with the highest specific biogas yield (262-265 and 303mL/g VS(added)). Kinetic analysis showed that Gompertz model fit the experimental data best with the least RMSE and largest R(2). Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. Final Environmental Impact Statement Permit Application by United States Steel Corp. Proposed Lake Front Steel Mill, Conneaut, Ohio. Volume 1,

    Science.gov (United States)

    1979-04-01

    substrate (bottom) in an aquatic environment. Biochemical Oxygen Demand (BOD) - The amount of dissolved oxygen required to meet the metabolic needs of...Furnace & Ladle Lining Removal 6 Dempster Dinosaur Diesel Scrap Box Handling 1 Lift-A-Loft Propane Maintenance Scaffold 2 Breezewagon Furnace Cooling 1...10,000 lb Electric Miscellaneous (Battery) Roll Shop 2 Dempster Dinosaur 15 cu yd - Diesel Scale Handling 30 ton (incl. Plate Mill) 3 Motor Scooter 4

  15. Science Shops

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1999-01-01

    The paper prsents the overall concept of science shops as practised in most of the European science shops and present the concept practised and some experience obtained at the Technical University of Denmark. An outline for the planning of new sceince shops is presented.......The paper prsents the overall concept of science shops as practised in most of the European science shops and present the concept practised and some experience obtained at the Technical University of Denmark. An outline for the planning of new sceince shops is presented....

  16. Pengaruh Beban Kerja dan Faktor Lingkungan Fisik Terhadap Tekanan Darah, Denyut Nadi dan Tingkat Kelelahan Pekerja Bagian ARC FURNACE dan ROLLING MILL PT. Inti General Yaja Steel Semarang

    Directory of Open Access Journals (Sweden)

    Ulfa Nurullita

    2015-12-01

    Full Text Available ABSTRACT Background: The existence of work efficiency can be reached with balancing work capacity and increase capacity in the working environment. One factor  in the  working  environment that cause work  inefficiency  is physical factor namely  heat stress, noise and lighting. The influence of physical  factors are indicated by  physical performance of the worker’s blood pressure  and fatigue level. Objective: to find out  the influence of work capacity and physical factors in the working  environment on the blood pressure, pulse, fatigue level of worker in  Arc Furnacearea  and Rolling Mill section, PT Inti General Yaja Steel Semarang. Methode: Type of the research was quasy experimental  with one group pre and post test design. The population were 178 worker  and  47 workers were  taken in this research. Confounding factors was cigarettes, cafein, drug consumption, and nutrition status. Result: There was  found differences of blood pressure before working  and after working (systole; p- Wilcoxon Sign Ranks = 0,001, diatole; p- Wilcoxon Sign Ranks, = 0,003. The average before working (systole=119,7 mmHg, diastole= 84 mmHg was higher than after working (systole=107,2 mmHg, diastole= 78,9 mmHg. There was  also  differences of  pulse rate before working  and after working  (p-paired t test= 0,001. The average of pulse before working (81,5 times/minute was lower than after working (87,5 times/minute. There was found differences of fatigue level before working and after working (p- Wilcoxon Sign Ranks=0,001. The average of fatigue level before working was measured  253,2 millisecond lower than after working  (290,7 milisecond. Conclusion: There is found  differences  of blood pressure, pulse and fatigue level before working  and after working. There are no differences of blood pressure transition, pulse transition and fatigue transition  based on heat stress, noise, lighting, work capacity, cigarettes, cafein, drug

  17. Internet Shopping

    Institute of Scientific and Technical Information of China (English)

    刘洪毓

    2004-01-01

    Nowadays you no longer need to walk round hundreds of shops looking for the items you need. You can shop for just about anything from your armchair. All you need is a computer and access(进入) to the Internet.

  18. Shopping Malls - ShoppingCenters

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Collected from a variety of sources both commercial and internal, this layer represents shopping center locations within Volusia County and is maintained by the...

  19. The effect of roll with passive segment on the planetary rolling process

    Directory of Open Access Journals (Sweden)

    Qing-Ling Zeng

    2015-03-01

    Full Text Available In three-roll planetary rolling process, there is secondary torsion phenomenon that may lead to rolling instability. This article proposed a new idea to alleviate the secondary torsion phenomenon by dividing the secondary torsion segment out of the roll as an independent and passive one. To study the performance of the roll with passive segment, the three-dimensional finite element models of planetary rolling process using actual roll or new roll with passive segment involving elastic–plastic and thermal–mechanical coupling were established by the software ABAQUS/Explicit, and a series of analysis had been done successfully. The rolling temperature and rolling force of planetary mill were in good agreement with the measured results, which indicated that the finite element method would supply important reference merit for three-dimensional thermo-mechanical simulation of the three-roll planetary rolling process. Comparing the simulation results of the two models, the results indicated that the change in the roll structure had just a little influence on the metal deformation, temperature, and rolling force, but it lessened the secondary torsion deformation effectively and improved the outside roundness of the rolled tube slightly. The research provided a new idea for the roll design of three-roll planetary mill (PSW.

  20. PECULIARITIES OF INFLUENCE OF THERMO-MECHANICAL PROCESSING IN PRODUCTION LINE OF MILL 150 OF THE BELARUSIAN METALLURGICAL WORKS ON QUALITATIVE CHARACTERISTICS OF HIGH-CARBON ROLLED WIRE

    Directory of Open Access Journals (Sweden)

    V. A. Lutsenko

    2012-01-01

    Full Text Available Using of new arrangement of finishing train of block structure with divisibility of deformation and system of inter-block control of the semi-finished rolled products temperature enables to decrease disorder of mechanical properties, to reduce the depth of the decarbonized layer.

  1. THE DEVELOPMENT OF TECHNOLOGY OF THE CORE THERMO-MECHANICALLY HARDENED REINFORC-ING STEEL OF GRADE A700HW OF DIE-ROLLED SECTION NO 12, 14, 16 PRODUCTION ACCORDING TO REQUIREMENT OF FINNISH STANDARDS SFST1216 IN CONDITIONS OF SMALL-SECTION MILL 320 OF RUP «BMZ»

    Directory of Open Access Journals (Sweden)

    A. V. Rusalenko

    2009-01-01

    Full Text Available The development of technology of the core thermomechanically hardened reinforcing steel of grade А700HW of die-rolled section No 12, 14, 16 production according to requirement of Finnish standards SFST1216 in conditions of small-section mill 320 of RUP «BMZ» is given.

  2. Roll-to-Roll production of carbon nanotubes based supercapacitors

    Science.gov (United States)

    Zhu, Jingyi; Childress, Anthony; Karakaya, Mehmet; Roberts, Mark; Arcilla-Velez, Margarita; Podila, Ramakrishna; Rao, Apparao

    2014-03-01

    Carbon nanomaterials provide an excellent platform for electrochemical double layer capacitors (EDLCs). However, current industrial methods for producing carbon nanotubes are expensive and thereby increase the costs of energy storage to more than 10 Wh/kg. In this regard, we developed a facile roll-to-roll production technology for scalable manufacturing of multi-walled carbon nanotubes (MWNTs) with variable density on run-of-the-mill kitchen Al foils. Our method produces MWNTs with diameter (heights) between 50-100 nm (10-100 μm), and a specific capacitance as high as ~ 100 F/g in non-aqueous electrolytes. In this talk, the fundamental challenges involved in EDLC-suitable MWNT growth, roll-to-roll production, and device manufacturing will be discussed along with electrochemical characteristics of roll-to-roll MWNTs. Research supported by NSF CMMI Grant1246800.

  3. Spray rolling aluminum alloy strip

    Energy Technology Data Exchange (ETDEWEB)

    McHugh, Kevin M.; Delplanque, J.-P.; Johnson, S.B.; Lavernia, E.J.; Zhou, Y.; Lin, Y

    2004-10-10

    Spray rolling combines spray forming with twin-roll casting to process metal flat products. It consists of atomizing molten metal with a high velocity inert gas, cooling the resultant droplets in flight and directing the spray between mill rolls. In-flight convection heat transfer from atomized droplets teams with conductive cooling at the rolls to rapidly remove the alloy's latent heat. Hot deformation of the semi-solid material in the rolls results in fully consolidated, rapidly solidified product. While similar in some ways to twin-roll casting, spray rolling has the advantage of being able to process alloys with broad freezing ranges at high production rates. This paper describes the process and summarizes microstructure and tensile properties of spray-rolled 2124 and 7050 aluminum alloy strips. A Lagrangian/Eulerian poly-dispersed spray flight and deposition model is described that provides some insight into the development of the spray rolling process. This spray model follows droplets during flight toward the rolls, through impact and spreading, and includes oxide film formation and breakup when relevant.

  4. Window shopping

    OpenAIRE

    Oz Shy

    2013-01-01

    The terms "window shopping" and "showrooming" refer to the activity in which potential buyers visit a brick-and-mortar store to examine a product but end up either not buying it or buying the product from an online retailer. This paper analyzes potential buyers who differ in their preference for after-sale service that is not offered by online retailers. For some buyers, making a trip to the brick-and-mortar store is costly; however, going to the store to examine the product has the advantage...

  5. Pipe Rolling from Continuous Cast Metal

    International Nuclear Information System (INIS)

    Zhordania, I.; Chkhartishvili, I.; Lordkipanidze, J.; Melashvili, Z.; Papava, K.; Khundadze, K.

    2007-01-01

    The approach to manufacturing of high quality pipes as a result of solid and hollow billet rolling from continuous cast metal is shown. Optimal parameters of piercing, temperature of piercing and piercing rolling mill rollers speed have been experimentally established. (author)

  6. Omni channel fashion shopping

    NARCIS (Netherlands)

    Kemperman, A.D.A.M.; van Delft, L.; Borgers, A.W.J.; Pantano, E.

    2015-01-01

    This chapter gives insight into consumers' online and offline fashion shopping behavior, consumers' omni-channel usage during the shopping process, and consumer fashion shopper segments. Based on a literature review, omni-channel shopping behavior during the shopping process was operationalized.

  7. Mechanical alloying and reactive milling in a high energy planetary mill

    International Nuclear Information System (INIS)

    Jiang Xianjin; Trunov, Mikhaylo A.; Schoenitz, Mirko; Dave, Rajesh N.; Dreizin, Edward L.

    2009-01-01

    Powder refinement in a planetary mill (Retsch PM 400-MA) is investigated experimentally and analyzed using discrete element modeling (DEM). Refinement is defined as the average size of the individual components in a composite powder. The specific milling dose, defined as the product of charge ratio and milling time, is used as an experimental parameter tracking the progress of the material refinement. This parameter is determined experimentally for milling of boron and titanium powders, for which the time of initiation of a self-sustained reaction is measured under different milling conditions. It is assumed that the reaction becomes self-sustaining when the same powder refinement is achieved. The DEM calculations established that the milling balls primarily roll along the milling container's perimeter. The inverse of the rate of energy dissipation resulting from this rolling motion is used as the DEM analog of the specific milling dose. The results correlate well with experimental observations.

  8. Radiometric study of creep in ingot rolling

    International Nuclear Information System (INIS)

    Kubicek, P.; Zamyslovsky, Z.; Uherek, J.

    The radiometric study of creep during ingot rolling performed in the rolling mill of the Vitkovice Iron and Steel Works and the first results are described. Selected sites in 3 to 8 ton ingots were labelled with 2 to 3.7x10 5 Bq of 60 Co and after rolling into blocks, the transposition of the labelled sites of the ingots was investigated. The results indicate creep during rolling, local extension in certain sites under study and help to determine the inevitable bottom crop incurred in the forming. Finally, the requirements put on the radiometric apparatus for the next stages of technological research are presented. (author)

  9. Rolling Stonesi kinokontsert kannab toorest rokiväge / Maris Meiessaar

    Index Scriptorium Estoniae

    Meiessaar, Maris

    2009-01-01

    Martin Scorsese muusikalisest dokumentaalfilmist "Shine a Light - Valgus peale" (USA-Suurbritannia, 2008), mille keskmes on 2006. a. New Yorgi Beaconi teatris toimunud briti ansambli Rolling Stones kontsert

  10. Practical job shop scheduling

    NARCIS (Netherlands)

    Schutten, Johannes M.J.

    1998-01-01

    The Shifting Bottleneck procedure is an intuitive and reasonably good approximation algorithm for the notoriously difficult classical job shop scheduling problem. The principle of decomposing a classical job shop problem into a series of single-machine problems can also easily be applied to job shop

  11. Kulturens rolle

    DEFF Research Database (Denmark)

    Hasse, Cathrine

    2007-01-01

    Kulturens rolle. Herunder kulturens betydning for psykologisk teori og forskning set i lyset af den stigende globalisering og væksten i kulturmøder. Der gives eksempler fra hverdagssituationer, den pædagogiske praksis, fra indvandrerforskning, turister men også fra avisernes referater af kulturmø......Kulturens rolle. Herunder kulturens betydning for psykologisk teori og forskning set i lyset af den stigende globalisering og væksten i kulturmøder. Der gives eksempler fra hverdagssituationer, den pædagogiske praksis, fra indvandrerforskning, turister men også fra avisernes referater af...

  12. 29 CFR 1910.216 - Mills and calenders in the rubber and plastics industries.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Mills and calenders in the rubber and plastics industries... Guarding § 1910.216 Mills and calenders in the rubber and plastics industries. (a) General requirements— (1... installed in accordance with this section and Subpart S of this part. (4) Mill roll heights. All new mill...

  13. Supporting shop floor intelligence

    DEFF Research Database (Denmark)

    Carstensen, Peter; Schmidt, Kjeld; Wiil, Uffe Kock

    1999-01-01

    Many manufacturing enterprises are now trying to introduce various forms of flexible work organizations on the shop floor. However, existing computer-based production planning and control systems pose severe obstacles for autonomous working groups and other kinds of shop floor control to become r......-to-day production planning by supporting intelligent and responsible workers in their situated coordination activities on the shop floor....

  14. Online Shopping Behavior

    OpenAIRE

    Shahzad, Hashim

    2015-01-01

    Online shopping is a very much developed phenomena in Scandinavian countries. Different online factors impact online consumers’ behavior differently depending on the environment of different regions. Sweden is one of the developed and technologically advanced countries. To see the impact of different factors on consumers’ online shopping behavior, the purpose of this study is to analyse the factors that influence consumers’ online shopping behavior in Sweden’s context. One of the objectives o...

  15. Power Service Shops

    Data.gov (United States)

    Federal Laboratory Consortium — TVA's Power Service Shops provides expert repair and maintenance of power system components and large industrial equipment. With world-class maintenance facilities...

  16. Technicians and Shop Owners

    Science.gov (United States)

    Overview page provides information for shops and technicians that repair or service motor vehicle air-conditioning systems, including information on proper training, approved equipment, and regulatory practices.

  17. Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

    Science.gov (United States)

    Serfas, Benjamin G; Büttner, Oliver B; Florack, Arnd

    2014-01-01

    The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

  18. Implication of human handling on packaged sausage rolls during sale

    Directory of Open Access Journals (Sweden)

    Coolborn AKHARAIYI FRED

    2016-08-01

    Full Text Available In other to identify the implication of human handling of packaged sausage rolls after production, a microbiological safety evaluation was carried out on sausage rolls sold on street and in shops. Among the sausage rolls, gala purchased from street vendors has the highest bacterial load of 2.82 × 104 CFU/g and 4.3 × 106 spore/g of fungal load, followed by meaty with bacterial load of 1.71 × 104 CFU/g and fungal load of 1.6 × 105 spore/g and was least in rite sausage roll with 1.46 × 104 CFU/g and 1 × 105 spore/g bacterial and fungal loads respectively. Seventeen bacteria species were isolated from both street vended and shop sold sausage rolls, the isolates identified including: Bacillus cereus, Acinetobacter calcoaceticus, Alcaligenes faecalis, Citrobacter freundii, Klebsiella ozaenae, Staphylococcus epidermidis, Enterobacter aerogenes, Staphylococcus aureus, Aeromonas hydrophila, Plesiomonas shigelloides, Moraxella catarhalis, Bacillus substilis, Escherichia coli, Salmonella typhi, Aeromonas anaerogenes, Aerococcus viridans and Azomonas agilis. Five fungi species were isolated from street vended sausage rolls only. The fungal species are Penicillium notatum, Aspergillus parasiticus, Aspergillus flavus, Penicillium italicum and Gliocephalis spp. From this study, street vended samples have higher microbial contamination than shop sold sausage rolls due to improper handling during sales.

  19. Machine Shop Lathes.

    Science.gov (United States)

    Dunn, James

    This guide, the second in a series of five machine shop curriculum manuals, was designed for use in machine shop courses in Oklahoma. The purpose of the manual is to equip students with basic knowledge and skills that will enable them to enter the machine trade at the machine-operator level. The curriculum is designed so that it can be used in…

  20. Hybrid job shop scheduling

    NARCIS (Netherlands)

    Schutten, Johannes M.J.

    1995-01-01

    We consider the problem of scheduling jobs in a hybrid job shop. We use the term 'hybrid' to indicate that we consider a lot of extensions of the classic job shop, such as transportation times, multiple resources, and setup times. The Shifting Bottleneck procedure can be generalized to deal with

  1. Online shopping hesitation.

    Science.gov (United States)

    Cho, Chang-Hoan; Kang, Jaewon; Cheon, Hongsik John

    2006-06-01

    This study was designed to understand which factors influence consumer hesitation or delay in online product purchases. The study examined four groups of variables (i.e., consumer characteristics, contextual factors perceived uncertainty factors, and medium/channel innovation factors) that predict three types of online shopping hesitation (i.e., overall hesitation, shopping cart abandonment, and hesitation at the final payment stage). We found that different sets of delay factors are related to different aspects of online shopping hesitation. The study concludes with suggestion for various delay-reduction devices to help consumers close their online decision hesitation.

  2. Research on the rolling moment in the symmetrical and asymmetrical rolling process

    Science.gov (United States)

    Alexa, V.; Raţiu, S. A.; Kiss, I.; Cioată, C. G.

    2017-01-01

    Research distribution the rolling moments symmetrical and asymmetrical report presents great importance both in theory and to introduce clarifications to the calculation of rolling resistance line assemblies. Clarifying individuals of metallic material deformation between the rolls single cylinder diameters act of any difference of work and analysis of advance and delay phenomena. Torque drive value for each of the rolling cylinders was done by reducing the thickness of the laminate samples, an experimental facility located in the laboratory of plastic deformation of the Faculty of Engineering Hunedoara. The analysis of research results show that in terms of power consumption for deformation and safety equipment in operation is rational for mills which require such a difference between the work rolls to execute about one cylinder operated.

  3. Shopping in discount stores

    DEFF Research Database (Denmark)

    Zielke, Stephan

    2014-01-01

    quarters of intentions to shop in discount stores. Value perception has the strongest total effect, which is partly mediated by enjoyment, shame and guilt. Attributions influence the shopping intention indirectly via value perception and emotions. The inferior quality attribution has the strongest total......This paper analyzes the impact of price-related attributions, emotions and value perception on the intention to shop at grocery discounters in an integrated framework. Moderating effects of price consciousness are also analyzed. The results show that the proposed model explains almost three...... effect, followed by the efficiency of the business model attribution. The unfairness to stakeholders and the tricks in price communication attribution mostly influence the shopping intention for less price-conscious customers....

  4. Space Odyssey Gift Shop

    Science.gov (United States)

    2000-01-01

    The Space Odyssey Gift Shop located in StenniSphere at the John C. Stennis Space Center in Hancock County, Miss., offers every visitor the opportunity to go home with 'the right stuff' from his or her StenniSphere visit. The gift shop is located just inside the front doors to StenniSphere and offers a wide range of space-related apparel, memorabilia, toys, books, mission patches and more.

  5. Machine Shop Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — Projects at IARC can benefit from Fermilab's experienced machinists, welders, and extensive on-site equipment. Equipment includes conventional and CNC mills, lathes,...

  6. Eyes Wide Shopped: Shopping Situations Trigger Arousal in Impulsive Buyers

    Science.gov (United States)

    Serfas, Benjamin G.; Büttner, Oliver B.; Florack, Arnd

    2014-01-01

    The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures. PMID:25489955

  7. Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

    Directory of Open Access Journals (Sweden)

    Benjamin G Serfas

    Full Text Available The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

  8. Retail Shopping Lists

    DEFF Research Database (Denmark)

    Schmidt, Marcus

    2012-01-01

    categories. An association between the frequency of a brand's appearance on lists and the amount of money spent on advertising the brand could not be found. A strong link between brands, prices and store names is revealed. Price in the majority of cases refers to brands rather than to product categories......The paper addresses consumers' shopping lists. The current study is based on a survey of 871 lists collected at retail grocery stores. Most items on shopping lists appear on the product category level rather than the brand level. The importance of the brand level varies considerably across product...

  9. Healthy grocery shopping

    Science.gov (United States)

    ... per serving.) Whole-wheat or other whole-grain pasta. Other grains such as millet, quinoa, amaranth, and bulgur. Rolled oats (not instant oatmeal). Limit refined grain or "white flour" products. ...

  10. Binjai Shopping Mall : Arsitektur Metafora

    OpenAIRE

    Abadsyah, Haris

    2014-01-01

    City of Binjai have a potential to increase economic growth, especially in the field of trade and services.It can be seen from appearance of the commercial building like the shopping center ( Binjai Super Mall, Ramayana and Suzuya ) Construction of Binjai Shopping Mall intended for planning new shopping centers that provide public kebuthan in Binjai and well planned shopping center with optimal processing space and create a comfortable and pleasant atmosphere. In addition, the ...

  11. Development of dissimilar metal transition joint by hot bond rolling

    International Nuclear Information System (INIS)

    Kurokawa, Hiroyuki; Nakasuji, Kazuyuki; Kajimura, Haruhiko; Nagai, Takayuki; Takeda, Seiichiro.

    1997-01-01

    Metallurgically bonded transition joints which enable to connect reprocessing equipments made of superior corrosion resistant valve metals (Ti-5Ta, Zr or Ti) to stainless steel piping are required for nuclear fuel reprocessing plants. The authors have developed dissimilar transition joints made of stainless steel and Ti-5Ta, Zr or Ti with an insert metal of Ta by the hot bond rolling process of clad bars and clad pipes, using a newly developed mill called 'rotary reduction mill'. This report presents the manufacturing process of dissimilar transition joints produced from the clad pipe with three layers by the hot bond rolling. First, the method of hot bond rolling of clad pipe is proposed. Then, the mechanical and corrosion properties of the dissimilar transition joints are evaluated in detail by carrying out various tests. Finally, the rolling properties in the clad pipe method are discussed. (author)

  12. Machine Shop Grinding Machines.

    Science.gov (United States)

    Dunn, James

    This curriculum manual is one in a series of machine shop curriculum manuals intended for use in full-time secondary and postsecondary classes, as well as part-time adult classes. The curriculum can also be adapted to open-entry, open-exit programs. Its purpose is to equip students with basic knowledge and skills that will enable them to enter the…

  13. Proportionate Flow Shop Games

    NARCIS (Netherlands)

    Estevez Fernandez, M.A.; Mosquera, M.A.; Borm, P.E.M.; Hamers, H.J.M.

    2006-01-01

    In a proportionate flow shop problem several jobs have to be processed through a fixed sequence of machines and the processing time of each job is equal on all machines.By identifying jobs with agents, whose costs linearly depend on the completion time of their jobs, and assuming an initial

  14. Female Consumers Recreational Shopping Experiences

    Directory of Open Access Journals (Sweden)

    Sarbjot Singh

    2013-04-01

    Full Text Available The study examines the core meaning of intrinsic shopping to understand their experimental aspects of recreational and leisure shopping. The study focus only on female shoppers of age group ranging from 25-30, and understand their mall experiences because this segment is newly transform into self dependent segment which have less social and familial liabilities and have enough enthusiasm to explore the world or their boundaries. The Grounded theory use for identification of recreational shopping themes which are (a seeking experiences and (b experimental shopping and each have respective sub themes. The themes are connected to the key idea that shoppers are motivated by their expectations and desires. The study uses social constructivism to find and understand the shopper meanings in real terms rather than imposing and judgment on them. The findings described the way people do recreational shopping and how shopping malls use as leisure space and become facilitators of recreational shopping activities. Females use malls to fulfill their recreational and leisure shopping experiences as this is the great way of enjoying shopping for females of small towns. In malls females not only enjoy product experiences but services experiences also which makes their shopping interesting. The way the female of this age category use malls help the marketers and retailers to understand this segment shopping patterns.

  15. Study Friction Distribution during the Cold Rolling of Material by Matroll Software

    International Nuclear Information System (INIS)

    Abdollahi, H.; Dehghani, K.

    2007-01-01

    Rolling process is one of the most important ways of metal forming. Since the results of this process are almost finished product, therefore controlling the parameters affecting this process is very important in order to have cold rolling products with high quality. Among the parameters knowing the coefficient of friction within the roll gap is known as the most significant one. That is because other rolling parameters such as rolling force, pressure in the roll gap, forward slip, surface quality of sheet, and the life of work rolls are directly influenced by friction. On the other hand, in rolling calculation due to lake of a true amount for coefficient of friction a supposed value is considered for it. In this study, a new software (Matroll), is introduced which can determine the coefficient of friction (COF) and plot the friction hills for an industrial mill. Besides, based on rolling equations, it offers about 30 rolling parameters as outputs. Having the rolling characteristics as inputs, the software is able to calculate the coefficient of friction. Many rolling passes were performed on real industrial aluminum mill. The coefficient of friction was obtained for all passes. The results are in good agreement with the findings of the other researchers

  16. CERN Shop Christmas Sale

    CERN Multimedia

    Visits & Exhibition Service/ETT-VE

    2001-01-01

    11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

  17. Comparison Shopping Agents and Czech Online Customers’ Shopping Behaviour

    Directory of Open Access Journals (Sweden)

    Pilik Michal

    2016-12-01

    Full Text Available The internet has changed the lifestyles and shopping behaviours of customers. Online purchasing enables people to obtain information about products and services provided more effectively and easily, with the result that home shopping has become ordinary and usual. This paper presents part of a research focusing on online shopping customers’ behaviour in the Czech Republic. The article pertains to comparison shopping agents (CPAs, a tool which provides information to customers and helps find the best offer. The research was conducted on the basis of an online questionnaire available on an internet web page. The main results confirmed a dependency between online purchasing and the use of shopping agents, which are very popular in the Czech Republic. Almost two-thirds of online shoppers use CPAs when they engage in internet shopping. The final part of the paper addresses references and customers’ reviews as an important factor for the selection of online retailer.

  18. CERN SHOP CHRISTMAS SALE

    CERN Multimedia

    Visits & Exhibition Service

    2000-01-01

    Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 12 to Thursday 14 December from 10.00 to 16.00.   Sweat-shirt col zippé, grey, blue, black (M, L, XL) 30.- Sweat-shirt col polo, grey, collar blue (M, L, XL) 30.- T-shirt, black, (M, L, XL) 15.- WWW T-shirt, white, bordeau (M, L, XL) 15.- CERN silk tie (3 colours) 33.- Fancy silk tie (blue, bordeau 25.- Silk scarf (blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- New model of CERN watch 25.- New CERN baseball cap 10.- Antimatter (English/anglais) 30.- The Search for Infinity (French, Italian, English,) 35.- Auf der Suche nach dem Unendlichen 45.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs (Shop will be closed at 12.00 on 22.12.).

  19. An advanced dissymmetric rolling model for online regulation

    Science.gov (United States)

    Cao, Trong-Son

    2017-10-01

    Roll-bite model is employed to predict the rolling force, torque as well as to estimate the forward slip for preset or online regulation at industrial rolling mills. The rolling process is often dissymmetric in terms of work-rolls rotation speeds and diameters as well as the friction conditions at upper and lower contact surfaces between work-rolls and the strip. The roll-bite model thus must be able to account for these dissymmetries and in the same time has to be accurate and fast enough for online applications. In the present study, a new method, namely Adapted Discretization Slab Method (ADSM) is proposed to obtain a robust roll-bite model, which can take into account the aforementioned dissymmetries and has a very short response time, lower than one millisecond. This model is based on the slab method, with an adaptive discretization and a global Newton-Raphson procedure to improve the convergence speed. The model was validated by comparing with other dissymmetric models proposed in the literature, as well as Finite Element simulations and industrial pilot trials. Furthermore, back-calculation tool was also constructed for friction management for both offline and online applications. With very short CPU time, the ADSM-based model is thus attractive for all online applications, both for cold and hot rolling.

  20. Online Shopping: Advantages over the Offline Alternative

    OpenAIRE

    Dr Joshua Chang

    2003-01-01

    The advent of the Internet as a shopping medium has enabled shoppers to gain shopping benefits such as convenience and time-saving, better information, and price savings. This paper aims to provide a better understanding of the benefits of Internet shopping by identifying and discussing the advantages of Internet shopping over traditional storefront shopping.

  1. Online Shopping In The UK

    OpenAIRE

    K. K. Ramachandran; K. K. Karthick; M. Saravana Kumar

    2011-01-01

    This paper will contribute to current academic literature in the area of online retailing and consumer behaviour. Our research outlines a survey conducted with respondents from the UK to ascertain their attitudes to grocery shopping both off and online. The findings indicate that, whilst the vast majority of our sample has experience of online shopping, few actively engage in online grocery shopping. Some of the reasons for this are highlighted and the key issues relate to consumer trust and ...

  2. Shopping Online Sebagai Gaya Hidup

    OpenAIRE

    Lestari, Sri Budi

    2015-01-01

    The use of internet communication technology can make the world as if in one hand makes electronicbusiness with the concept of Online Shopping at its peak in recent years along with the development ofcommunication technologies over theInternet.How to shop online by using the internet through computers andmobile devices is increasingly popular smartphone can even be said to have become a trend today.Variousconvenience of shopping be the main thing to offer, with enough gadgets available in the...

  3. SHOPPING ONLINE SEBAGAI GAYA HIDUP

    OpenAIRE

    Sri Budi Lestari

    2016-01-01

    The use of internet communication technology can make the world as if in one hand makes electronic business with the concept of Online Shopping at its peak in recent years along with the development of communication technologies over theInternet.How to shop online by using the internet through computers and mobile devices is increasingly popular smartphone can even be said to have become a trend today.Various convenience of shopping be the main thing to offer, with enough gadgets ...

  4. Rolling Force Prediction in Heavy Plate Rolling Based on Uniform Differential Neural Network

    Directory of Open Access Journals (Sweden)

    Fei Zhang

    2016-01-01

    Full Text Available Accurate prediction of the rolling force is critical to assuring the quality of the final product in steel manufacturing. Exit thickness of plate for each pass is calculated from roll gap, mill spring, and predicted roll force. Ideal pass scheduling is dependent on a precise prediction of the roll force in each pass. This paper will introduce a concept that allows obtaining the material model parameters directly from the rolling process on an industrial scale by the uniform differential neural network. On the basis of the characteristics that the uniform distribution can fully characterize the solution space and enhance the diversity of the population, uniformity research on differential evolution operator is made to get improved crossover with uniform distribution. When its original function is transferred with a transfer function, the uniform differential evolution algorithms can quickly solve complex optimization problems. Neural network structure and weights threshold are optimized by uniform differential evolution algorithm, and a uniform differential neural network is formed to improve rolling force prediction accuracy in process control system.

  5. Online Shopping Woes

    Institute of Scientific and Technical Information of China (English)

    Hou Weili

    2011-01-01

    AS a frequent online shopper,Zhou Fangjie,a 28-year-old white-collar worker,was annoyed when she could not open Hanyidushe,an online shop selling Korean-style clothing on Taobao Mall.Her experience resulted from the online protest initiated by small vendors on Taobao Mall,China's largest business to consumer online platform.Thousands of small vendors started the protest against larger established vendors by discrediting them through False orders,forming an anti-Taobao Union and setting up a chat room to devise ways to disrupt operations on Taobao Mall.

  6. Machine shop basics

    CERN Document Server

    Miller, Rex

    2004-01-01

    Use the right tool the right wayHere, fully updated to include new machines and electronic/digital controls, is the ultimate guide to basic machine shop equipment and how to use it. Whether you're a professional machinist, an apprentice, a trade student, or a handy homeowner, this fully illustrated volume helps you define tools and use them properly and safely. It's packed with review questions for students, and loaded with answers you need on the job.Mark Richard Miller is a Professor and Chairman of the Industrial Technology Department at Texas A&M University in Kingsville, T

  7. Engaging the Shopping Experience

    DEFF Research Database (Denmark)

    Sørensen, Sanne Dollerup

    The revenues in brick-and-mortar stores have declined in the last decade, not least due to competition from online shopping. This thesis investigates how traditional stores might use principles from experience design to reverse this tendency. Brick-and-mortar stores are very important...... the interest in brick-and-mortar stores by engaging the customers emotionally. This thesis suggests that using insights from Possible World Theory in designing stores is one way to do this. Theoretically the thesis is interdisciplinary by drawing on knowledge from a wide spectrum of fields such as consumer...

  8. Reception Shop Special Stand

    CERN Multimedia

    Education and Technology Transfer Unit/ETT-EC

    2004-01-01

    Friday 15.10.2004 CERN 50th Anniversary articles will be sold in the Main Building, ground floor on Friday 15th October from 10h00 to 16h00. T-shirt, (S, M, L, XL) 20.- K-way (M, L, XL) 20.- Silk tie (2 models) 30.- Einstein tie 45.- Umbrella 20.- Caran d'Ache pen 5.- 50th Anniversary Pen 5.- Kit of Cartoon Album & Crayons 10.- All the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.00 hrs. Education and Technology Transfer Unit/ETT-EC

  9. Uranium milling costs

    International Nuclear Information System (INIS)

    Coleman, R.B.

    1980-01-01

    Basic process flowsheets are reviewed for conventional milling of US ores. Capital costs are presented for various mill capacities for one of the basic processes. Operating costs are shown for various mill capacities for all of the basic process flowsheets. The number of mills using, or planning to use, a particular process is reviewed. A summary of the estimated average milling costs for all operating US mills is shown

  10. Rolling Shutter Motion Deblurring

    KAUST Repository

    Su, Shuochen

    2015-06-07

    Although motion blur and rolling shutter deformations are closely coupled artifacts in images taken with CMOS image sensors, the two phenomena have so far mostly been treated separately, with deblurring algorithms being unable to handle rolling shutter wobble, and rolling shutter algorithms being incapable of dealing with motion blur. We propose an approach that delivers sharp and undis torted output given a single rolling shutter motion blurred image. The key to achieving this is a global modeling of the camera motion trajectory, which enables each scanline of the image to be deblurred with the corresponding motion segment. We show the results of the proposed framework through experiments on synthetic and real data.

  11. Ring rolling process simulation for geometry optimization

    Science.gov (United States)

    Franchi, Rodolfo; Del Prete, Antonio; Donatiello, Iolanda; Calabrese, Maurizio

    2017-10-01

    Ring Rolling is a complex hot forming process where different rolls are involved in the production of seamless rings. Since each roll must be independently controlled, different speed laws must be set; usually, in the industrial environment, a milling curve is introduced to monitor the shape of the workpiece during the deformation in order to ensure the correct ring production. In the present paper a ring rolling process has been studied and optimized in order to obtain anular components to be used in aerospace applications. In particular, the influence of process input parameters (feed rate of the mandrel and angular speed of main roll) on geometrical features of the final ring has been evaluated. For this purpose, a three-dimensional finite element model for HRR (Hot Ring Rolling) has been implemented in SFTC DEFORM V11. The FEM model has been used to formulate a proper optimization problem. The optimization procedure has been implemented in the commercial software DS ISight in order to find the combination of process parameters which allows to minimize the percentage error of each obtained dimension with respect to its nominal value. The software allows to find the relationship between input and output parameters applying Response Surface Methodology (RSM), by using the exact values of output parameters in the control points of the design space explored through FEM simulation. Once this relationship is known, the values of the output parameters can be calculated for each combination of the input parameters. After the calculation of the response surfaces for the selected output parameters, an optimization procedure based on Genetic Algorithms has been applied. At the end, the error between each obtained dimension and its nominal value has been minimized. The constraints imposed were the maximum values of standard deviations of the dimensions obtained for the final ring.

  12. Coffee Shop Youth Lifestyle

    Directory of Open Access Journals (Sweden)

    Vahid Shalchi

    2008-04-01

    Full Text Available This article has a review on the third zone coffee shop youth life style and looks forward to note the features of this group’s life style. Some of the other objective of this article are notifying the importance of different elements in life, consumption norms and the types of leisure. The results of this research shows that in this social atmosphere, post modern lifestyle features are seen as fashion, hybrid taste, interaction among local and global affairs, the importance of hobbies, consumption and the necessity of leisure. The study on this group of Iranian youth foretells how difficult. Complicated and fragile cultural policy is. Therefore, cultural affecting on the youth generation is not possible only through addrssing the values in surface.

  13. Ship Roll Damping Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2012-01-01

    limitations and large variations of the spectral characteristics of wave-induced roll motion. This tutorial paper presents an account of the development of various ship roll motion control systems together with the challenges associated with their design. It discusses the assessment of performance...

  14. Cosmology with rolling tachyon

    Indian Academy of Sciences (India)

    Email: sami@iucaa.ernet.in. Abstract. We examine the possibility of rolling tachyon to play the dual role of inflaton at early epochs and dark matter at late times. We argue that enough inflation can be generated with the rolling tachyon either by invoking the large number of branes or brane world assisted inflation. However ...

  15. Origins of Rolling Friction

    Science.gov (United States)

    Cross, Rod

    2017-01-01

    When a hard object rolls on a soft surface, or vice versa, rolling friction arises from deformation of the soft object or the soft surface. The friction force can be described in terms of an offset in the normal reaction force or in terms of energy loss arising from the deformation. The origin of the friction force itself is not entirely clear. It…

  16. Buying cannabis in 'coffee shops'.

    Science.gov (United States)

    Monshouwer, Karin; Van Laar, Margriet; Vollebergh, Wilma A

    2011-03-01

    The key objective of Dutch cannabis policy is to prevent and limit the risks of cannabis consumption for users, their direct environment and society ('harm reduction'). This paper will focus on the tolerated sale of cannabis in 'coffee shops'. We give a brief overview of Dutch policy on coffee shops, its history and recent developments. Furthermore, we present epidemiological data that may be indicative of the effects of the coffee shop policy on cannabis and other drug use. Dutch coffee shop policy has become more restrictive in recent years and the number of coffee shops has decreased. Cannabis prevalence rates in the adult population are somewhat below the European average; the rate is relatively high among adolescents; and age of first use appears to be low. On a European level, the use of hard drugs in both the Dutch adult and adolescent population is average to low (except for ecstasy among adults). International comparisons do not suggest a strong, upward effect of the coffee shop system on levels of cannabis use, although prevalence rates among Dutch adolescents give rise to concern. Furthermore, the coffee shop system appears to be successful in separating the hard and soft drugs markets. Nevertheless, in recent years, issues concerning the involvement of organised crime and the public nuisance related to drug tourism have given rise to several restrictive measures on the local level and have sparked a political debate on the reform of Dutch drug policy. © 2011 Trimbos Institute.

  17. Adaptive Automatic Gauge Control of a Cold Strip Rolling Process

    Directory of Open Access Journals (Sweden)

    ROMAN, N.

    2010-02-01

    Full Text Available The paper tackles with thickness control structure of the cold rolled strips. This structure is based on the rolls position control of a reversible quarto rolling mill. The main feature of the system proposed in the paper consists in the compensation of the errors introduced by the deficient dynamics of the hydraulic servo-system used for the rolls positioning, by means of a dynamic compensator that approximates the inverse system of the servo-system. Because the servo-system is considered variant over time, an on-line identification of the servo-system and parameter adapting of the compensator are achieved. The results obtained by numerical simulation are presented together with the data taken from real process. These results illustrate the efficiency of the proposed solutions.

  18. Gold-decorated shopping centre; Golddekoriertes Shopping Center

    Energy Technology Data Exchange (ETDEWEB)

    Altmannshofer, Robert

    2010-11-15

    In the autumn 2009, the German quality seal sustainable construction for commercial new buildings was introduced. Thus, owners and operators of retail real estate and shopping centres can make clear their commitment in the matter of sustainability. The Ernst-August-Galerie (Hanover, Federal Republic of Germany) developed and operated by ECE Projektmanagement GmbH and Co. KG (Hamburg, Federal Republic of Germany) was a pilot project and also the first gold in one. With its around 150 shops, the Ernst-August-Galerie offers a supermarket, fashion outlets, a food court, service outlets and restaurants/cafes. The spacious and elegantly designed shopping mall with its piazzas and light-flooded rotundas exudes a Mediterranean air, making it a high-quality venue for shopping, strolling and leisure activities.

  19. Shopping Centres and Selected Aspects of Shopping Behaviour (Brno, the Czech Republic)

    Czech Academy of Sciences Publication Activity Database

    Kunc, J.; Tonev, P.; Szczyrba, Z.; Frantál, Bohumil

    2012-01-01

    Roč. 7, č. 2 (2012), s. 39-51 ISSN 2065-4421 Institutional support: RVO:68145535 Keywords : shopping centres * shopping habits * commuting to retail shops Subject RIV: AO - Sociology, Demography http://technicalgeography.org/pdf/2_2012/05_josef_kunc_petr_tonev_zdenek_szczyrba_bohumil_frantal_shopping_centres_and_selected_aspects_of_shopping_behaviour.pdf

  20. Process Waste Assessment - Paint Shop

    International Nuclear Information System (INIS)

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is open-quote Paint Shop wasteclose quotes -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so

  1. Shopping Mall to Study Hall.

    Science.gov (United States)

    Rittner-Heir, Robbin M.

    1999-01-01

    Discusses how the Burnsville (Minnesota) expanded its high school classroom space by buying a shopping mall and converting it into classrooms. Renovation costs and classroom layout are briefly discussed; a floor plan is included. (GR)

  2. R3D3 : The Rolling Receptionist Robot with Double Dutch Dialogue

    NARCIS (Netherlands)

    Linssen, Jeroen; Theune, Mariet

    We discuss the design of R3D3, a rolling receptionist robot with the ability to conduct 'double Dutch dialogues': dialogues (in Dutch) that involve, besides a human user, both a robot and a virtual human. R3D3 is intended to assist people when they visit shops, museums, or other establishments by

  3. R3D3: The Rolling Receptionist Robot with Double Dutch Dialogue

    NARCIS (Netherlands)

    Linssen, Jeroen; Theune, Mariet

    We discuss the design of R3D3, a rolling receptionist robot with the ability to conduct 'double Dutch dialogues': dialogues (in Dutch) that involve, besides a human user, both a robot and a virtual human. R3D3 is intended to assist people when they visit shops, museums, or other establishments by

  4. Refinement of the microstructure of steel by cross rolling

    International Nuclear Information System (INIS)

    Tsay, Kira; Arbuz, Alexandr; Gusseynov, Nazim; Nemkaeva, Renata; Ospanov, Nurlan; Krupen'kin, Ivan

    2016-01-01

    One of the most effective ways for refinement of metal microstructure is a severe plastic deformation. The cross rolling is the one of most perspective methods of severe plastic deformation, because it allows to get the long billets, unlike equal angular pressing and other popular methods. This fact provides some industrial expectation for this method. However, deformation and motion path of the metal is very heterogeneous across the section of the rolled piece. This paper presents the finite element modeling of hot cross rolling of steel in the software package DEFORM-3D features implemented and studied the stress-strain state. An experimental study of the effect of the cross rolling on a three-roll mill on the microstructure of structural alloy steel and stainless steel AISI321 in different zones of the bar. Analysis of microsections made after rolling with high total stretch and the final pass temperature 700°C, shows the formation of equiaxial ultrafinegrain structure on the periphery of an elongated rod and “rolling” texture in the central zone. The resulting microstructure corresponds to that obtained in models of stress-strain state. Keywords: cross rolling, ultra-fine grain structure, steel.

  5. Vape Shop Employees: Public Health Advocates?

    OpenAIRE

    Hart, Joy L; Walker, Kandi L; Sears, Clara G; Lee, Alexander S; Smith, Courteney; Siu, Allison; Keith, Rachel; Ridner, S. Lee

    2017-01-01

    INTRODUCTION E-cigarettes have increased in popularity and given rise to a new type of sales outlet?the vape shop. Expanding on work examining vape shop employee e-cigarette and tobacco attitudes and behaviors 1 , this study examined key messages that vape shop employees communicate to customers. METHODS Using informal interviews, observations, and a cross-sectional survey, we examined vape shop employees? (n=16) perceptions and e-cigarette use. Data were collected in nine vape shops in Louis...

  6. Hedonic Motivations for Online Shopping

    OpenAIRE

    Pui-Lai To; E-Ping Sung

    2014-01-01

    The purpose of this study is to investigate hedonic online shopping motivations. A qualitative analysis was conducted to explore the factors influencing online hedonic shopping motivations. The results of the study indicate that traditional hedonic values, consisting of social, role, self-gratification, learning trends, pleasure of bargaining, stimulation, diversion, status, and adventure, and dimensions of flow theory, consisting of control, curiosity, enjoyment, and telepresence, exist in t...

  7. Roll force prediction of high strength steel using foil rolling theory in cold skin pass rolling

    International Nuclear Information System (INIS)

    Song, Gil Ho; Jung, Jae Chook

    2013-01-01

    Skin pass rolling is a very important process for applying a certain elongation to a strip in the cold rolling and annealing processes, which play an important role in preventing the stretching of the yield point when the material is processed. The exact prediction of the rolling force is essential for obtaining a given elongation with the steel grade and strip size. Unlike hot rolling and cold rolling, skin pass rolling is used to apply an elongation of within 2% to the strip. Under a small reduction, it is difficult to predict the rolling force because the elastic deformation behavior of the rolls is complicated and a model for predicting the rolling force has not yet been established. Nevertheless, the exact prediction of the rolling force in skin pass rolling has gained increasing importance in recent times with the rapid development of high strength steels for use in automobiles. In this study, the possibility of predicting the rolling force in skin pass rolling for producing various steel grades was examined using foil rolling theory, which is known to have similar elastic deformation behavior of rolls in the roll bite. It was found that a noncircular arc model is more accurate than a circular model in predicting the roll force of high strength steel below TS 980 MPa in skin pass rolling

  8. Pre-treatment of Biomass By Rolling - A Combined Experimental and Numerical Analysis

    DEFF Research Database (Denmark)

    Hansen, Klaus Schütt; Ravn, Christian; Nielsen, Emil Krabbe

    2017-01-01

    Pre-treatment of bulk straw material by rolling is studied as a possible method to prepare for subsequent biogas production. A combined experimental and theoretical study is presented. A pilot rolling mill with a double screw feeder is designed and constructed for crushing of bulk straw. Experime...... process window for pre-treatment of wheat straw by roll pressing varying the feed, the roll gap, the roll speed and the moisture content of the bulk straw.......Pre-treatment of bulk straw material by rolling is studied as a possible method to prepare for subsequent biogas production. A combined experimental and theoretical study is presented. A pilot rolling mill with a double screw feeder is designed and constructed for crushing of bulk straw....... Experiments show that the roll speed and the roll reduction should be chosen within a specific range depending on the injection screw speed to avoid blocking or insufficient compaction. A mechanical testing procedure of the bulk straw material including closed die compaction testing as well as simple...

  9. Model for prediction of strip temperature in hot strip steel mill

    International Nuclear Information System (INIS)

    Panjkovic, Vladimir

    2007-01-01

    Proper functioning of set-up models in a hot strip steel mill requires reliable prediction of strip temperature. Temperature prediction is particularly important for accurate calculation of rolling force because of strong dependence of yield stress and strip microstructure on temperature. A comprehensive model was developed to replace an obsolete model in the Western Port hot strip mill of BlueScope Steel. The new model predicts the strip temperature evolution from the roughing mill exit to the finishing mill exit. It takes into account the radiative and convective heat losses, forced flow boiling and film boiling of water at strip surface, deformation heat in the roll gap, frictional sliding heat, heat of scale formation and the heat transfer between strip and work rolls through an oxide layer. The significance of phase transformation was also investigated. Model was tested with plant measurements and benchmarked against other models in the literature, and its performance was very good

  10. Model for prediction of strip temperature in hot strip steel mill

    Energy Technology Data Exchange (ETDEWEB)

    Panjkovic, Vladimir [BlueScope Steel, TEOB, 1 Bayview Road, Hastings Vic. 3915 (Australia)]. E-mail: Vladimir.Panjkovic@BlueScopeSteel.com

    2007-10-15

    Proper functioning of set-up models in a hot strip steel mill requires reliable prediction of strip temperature. Temperature prediction is particularly important for accurate calculation of rolling force because of strong dependence of yield stress and strip microstructure on temperature. A comprehensive model was developed to replace an obsolete model in the Western Port hot strip mill of BlueScope Steel. The new model predicts the strip temperature evolution from the roughing mill exit to the finishing mill exit. It takes into account the radiative and convective heat losses, forced flow boiling and film boiling of water at strip surface, deformation heat in the roll gap, frictional sliding heat, heat of scale formation and the heat transfer between strip and work rolls through an oxide layer. The significance of phase transformation was also investigated. Model was tested with plant measurements and benchmarked against other models in the literature, and its performance was very good.

  11. Biomass torrefaction mill

    Science.gov (United States)

    Sprouse, Kenneth M.

    2016-05-17

    A biomass torrefaction system includes a mill which receives a raw biomass feedstock and operates at temperatures above 400 F (204 C) to generate a dusty flue gas which contains a milled biomass product.

  12. ATTITUDES TOWARD ONLINE SHOPPING FROM THE ASPECTS OF PERSONAL CHARACTERISTICS AND SHOPPING MOTIVE THROUGH A DEVELOPING CONCEPT: PRIVATE SHOPPING

    OpenAIRE

    BAYBARS, Miray; USTUNDAGLI, Elif

    2011-01-01

    Private shopping is one of the concepts that serve as a members-only online shopping platform with deep discounts and well-known brands. The aim of this paper is to determine whether consumers’ need for uniqueness and innovativeness as a personal trait and price discount orientation affect consumer attitudes toward private shopping and their purchase decision or not. Research results revealed that need for uniqueness and innovativeness affect positive attitudes towards private shopping positi...

  13. Consumer protection and internet shopping

    OpenAIRE

    Blažková, Lenka

    2010-01-01

    The diploma thesis is devoted to the issue of online shopping. Its aim is to analyze internet shopping and see the rights and obligations of consumers and sellers, which are based on current legislation. The thesis is divided into two parts. The theoretical part deals with purchase over the internet and its regulations. There are explained the concepts internet, e-business and e-commerce and indicate the types of e-business and is mentioned certification of online stores. The practical part i...

  14. Price learning during grocery shopping

    DEFF Research Database (Denmark)

    Jensen, Birger Boutrup

    Many attempts have been made to measure consumers' price knowledge for groceries. However, the results have varied considerably and conflict with results of reference price research. This is the first study to examine price knowledge before, during, and after store visit, thus enabling a study...... of what consumers learn about prices during grocery shopping. Three measures of price knowledge corresponding to different levels of price information processing were applied. Results indicate that price learning does take place and that episodic price knowledge after store exit is far more widespread...... than expected. Consequently, a new view of how consumer price knowledge evolves during grocery shopping is presented....

  15. Multiattribute shopping models and ridge regression analysis

    NARCIS (Netherlands)

    Timmermans, H.J.P.

    1981-01-01

    Policy decisions regarding retailing facilities essentially involve multiple attributes of shopping centres. If mathematical shopping models are to contribute to these decision processes, their structure should reflect the multiattribute character of retailing planning. Examination of existing

  16. Retailing and Shopping on the Internet.

    Science.gov (United States)

    Rowley, Jennifer

    1996-01-01

    Internet advertising and commercial activity are increasing. This article examines challenges facing the retail industry on the Internet: location; comparison shopping; security, especially financial transactions; customer base and profile; nature of the shopping experience; and legal and marketplace controls. (PEN)

  17. Dynamic Support of Government in Online Shopping

    OpenAIRE

    Hai, Le Chi; Alam Kazmi, Syed Hasnain

    2015-01-01

    Advancements in online shopping for consumers requires consistent government support policies and the introduction of substantial government laws and regulations. In order to establish innovative developments in online shopping market environment that makes online shopping faster and stable, the government perspective is vital with the Technology Acceptance Model (TAM) for research and development in online shopping behavior for consumer’s confidence and their purchase intention. The proposed...

  18. Marketing plan for a web shop business

    OpenAIRE

    Koskivaara, Leonilla

    2014-01-01

    Internet has changed the buying behavior of consumers during the past years and companies need to adapt to the changes. Web shop business is an important sales channel of today’s companies. Advantages of a web shop business include cost effectiveness and potential to do business globally. Challenges of a web shop business include search engine optimization and running both, a retail store and a web shop at the same time. Social media has become an important marketing channel and has bec...

  19. Microstructure evolution during spray rolling and heat treatment of 2124 Al

    Energy Technology Data Exchange (ETDEWEB)

    McHugh, K.M. [Industrial Technology Department, Idaho National Laboratory, Idaho Falls, ID 83415-2050 (United States)], E-mail: kevin.mchugh@inl.gov; Lin, Y.; Zhou, Y.; Johnson, S.B.; Delplanque, J.-P.; Lavernia, E.J. [Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616 (United States)

    2008-03-25

    Spray rolling is a strip-casting technology that combines elements of spray forming and twin-roll casting. It consists of atomizing molten metal with a high velocity inert gas, quenching the resultant droplets in flight, and directing the spray between mill rolls. In-flight convection heat transfer from atomized droplets and conduction heat transfer at the rolls rapidly remove the metal's latent heat. Hot deformation of the semi-solid material in the rolls results in fully consolidated, rapidly-solidified strip. Spray rolling operates at a higher solidification rate than conventional twin-roll casting and is able to process a broader range of alloys at high production rates. A laboratory-scale strip caster was constructed and used to evaluate the interplay of processing parameters and strip quality for strips up to 200 mm wide and 1.6-6.4 mm thick. This paper examines microstructure evolution during spray rolling and explores how gas-to-metal mass flow ratio influences the microstructure and mechanical properties of spray-rolled 2124 Al. The influences of solution heat treatment and cold rolling on grain structure and constituent particle spheroidization are also examined.

  20. Rolling at small scales

    DEFF Research Database (Denmark)

    Nielsen, Kim L.; Niordson, Christian F.; Hutchinson, John W.

    2016-01-01

    The rolling process is widely used in the metal forming industry and has been so for many years. However, the process has attracted renewed interest as it recently has been adapted to very small scales where conventional plasticity theory cannot accurately predict the material response. It is well....... Metals are known to be stronger when large strain gradients appear over a few microns; hence, the forces involved in the rolling process are expected to increase relatively at these smaller scales. In the present numerical analysis, a steady-state modeling technique that enables convergence without...

  1. METHOD OF ROLLING URANIUM

    Science.gov (United States)

    Smith, C.S.

    1959-08-01

    A method is described for rolling uranium metal at relatively low temperatures and under non-oxidizing conditions. The method involves the steps of heating the uranium to 200 deg C in an oil bath, withdrawing the uranium and permitting the oil to drain so that only a thin protective coating remains and rolling the oil coated uranium at a temperature of 200 deg C to give about a 15% reduction in thickness at each pass. The operation may be repeated to accomplish about a 90% reduction without edge cracking, checking or any appreciable increase in brittleness.

  2. Handbook for Trade and Industrial Shop Teachers.

    Science.gov (United States)

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This handbook is intended to help teachers of pre-employment shop courses in organizing and delivering instruction in both the shop and classroom. Addressed in the guide are the following topics: the instructor's place in the local school organization; the instructor's job (objectives, advisory committees, occupational analysis, shop/classroom and…

  3. The Shopping Mall: A Teenager Hangout.

    Science.gov (United States)

    Anthony, Kathryn H.

    1985-01-01

    Investigated teenagers' use of the shopping mall as a "hangout" through interviews with 51 adolescents using the mall, and 10 hours of behavioral observations. Results indicated that many teenagers visit the shopping center regularly to watch members of the opposite sex, play video games, see friends, shop, and people-watch. (Author/NRB)

  4. CERN Shop - Christmas Sale in Bldg. 33

    CERN Multimedia

    PH Department

    Looking for Christmas present ideas? The CERN Shop will give the CERN card holders a special reduction of 10 % on all CERN Shop articles from Friday 11.12.2009 to Thursday 17.12.2009. Come to visit the CERN Shop at the Reception, Building 33. PH-EDU-PO

  5. CERN Shop - Christmas Sale in Bldg. 33

    CERN Multimedia

    PH Department

    2010-01-01

    Looking for Christmas present ideas? The CERN Shop will give CERN card holders a special reduction of 10 % on all CERN Shop articles from Monday 13.12.2010 to Saturday 18.12.2010. Come and visit the CERN Shop in the Reception Building 33.

  6. Kinect sensing of shopping related actions

    NARCIS (Netherlands)

    Popa, M.; Koc, A.K.; Rothkrantz, L.J.M.; Shan, C.; Wiggers, P.

    2011-01-01

    Surveillance systems in shopping malls or supermarkets are usually used for detecting abnormal behavior. We used the distributed video cameras system to design digital shopping assistants which assess the behavior of customers while shopping, detect when they need assistance, and offer their support

  7. Shopping for a safer car

    Science.gov (United States)

    2010-01-01

    This brochure provides some helpful tips on what to look for when shopping for a safer car. Automakers are increasingly advertising the safety features of their cars. The problem is sorting out their claims and zeroing in on the safety features that ...

  8. Machine Shop Fundamentals: Part I.

    Science.gov (United States)

    Kelly, Michael G.; And Others

    These instructional materials were developed and designed for secondary and adult limited English proficient students enrolled in machine tool technology courses. Part 1 includes 24 lessons covering introduction, safety and shop rules, basic machine tools, basic machine operations, measurement, basic blueprint reading, layout, and bench tools.…

  9. English in the Garment Shops.

    Science.gov (United States)

    Verplaetse, Lorrie

    This text for limited-English-speaking workers in the garment industry consits of illustrated vocabulary words, grammar lessons, narratives or brief readings, and exercises on employment-related topics. The first section focuses on shop talk, including job-specific vocabulary, simple expressions and explanations, social language, seeking and…

  10. Customer experience with online shopping : what are the unique experiences customers seek from online shopping?

    OpenAIRE

    Jin, Daoyan

    2013-01-01

    Over the last decade, there has been a great change in consumers' shopping behavior along with technological change. Online shopping is the use of computer technology for better shopping performance. Retailers are busy in studying consumers' behavior to see their attitudes toward online shopping and to meet the demand of online shoppers. Due to my interest in online business, I have also decided to study about customers' attitudes toward online shopping and specifically regarding factors that...

  11. Person og Rolle

    DEFF Research Database (Denmark)

    Szatkowski, Janek

    2011-01-01

    Distinktionen mellem person og rolle forslås som grundlag for et præcist og anlytisk anvendeligt begreb om performativitet. Begrebet tager sigte på at beskrive enkeltindividers og gruppers kommunikation med henblik på hvordan kommunikation etableres. Performativitet gør det muligt at iagttage den...

  12. Ship Roll Motion Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2010-01-01

    . This tutorial paper presents an account of the development of various ship roll motion control systems and the challenges associated with their design. The paper discusses how to assess performance, the applicability of dierent models, and control methods that have been applied in the past....

  13. Rolling Cylinder Phase 1

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Taraborrelli, Valeria Taraborrelli

    Margheritini and Valeria Taraborrelli(valeria.taraborrelli@hotmail.it) with a total of 3 day visit from the developers. Laboratory tests in irregular waves will be performed by Lucia Margheritini. The report is aimed at the first stage testing of the Rolling Cylinder wave energy device. This phase includes...

  14. Multilayer Steel Materials Deformation Resistance and Roll Force Measurement

    Directory of Open Access Journals (Sweden)

    A. G. Kolesnikov

    2014-01-01

    Full Text Available To create new types of cars, raise their reliability, gain operational life, and decrease in metal consumption of products it is necessary to improve mechanical, physical, and also special properties of the constructional materials applied in mechanical engineering. Presently, there are intensive researches and developments under way to create materials with ultrafine-grained structure (the sizes of grains in their crystal lattice make less than 1 micron in one of the measurements.BMSTU developed a manufacturing technology of multilayer steel sheets with steady ultrafine-grained structure based on the multiple hot rolling of billet as a composition consisting of the alternating metal sheets. A principled condition for implementation of such technology is existence of different crystallographic modifications in the adjoining sheets of the composition at specified temperature of rolling.Power parameters of rolling are important technical characteristics of the process. Usually, to determine a deformation resistance value when rolling the diverse multilayer materials, is used the actual resistance value averaging in relation to the components of the composition. The aim of this work is a comparative analysis of known calculated dependences with experimental data when rolling the 100-layer samples. Objects of research were the 100-layer compositions based on the alternating layers of steel 08H18N10 and U8.Experimental samples represented the vacuumized capsules with height, width, and length of 53 mm x 53 mm x 200 mm, respectively, in which there were the 100-layer packs from sheets, each of 0.5 mm, based on the composition of steels (U8+08H18N10. Rolling was made on the double-high mill with rolls of 160 mm in diameter during 19 passes to the thickness of 7 mm with the speed of 0,1 m/s. Relative sinking in each pass was accepted to be equal 10±2,5%. Rolling forces were measured by the strain-gauging method using the measuring cells, located under

  15. Effect of surface shear on cube texture formation in heavy cold-rolled Cu-45 at%Ni alloy substrates

    DEFF Research Database (Denmark)

    Tian, Hui; Suo, Hongli; Liang, Yaru

    2015-01-01

    Two types of Cu-45 at%Ni alloy thin tapes with and without surface shear were obtained by different heavy cold rolling processes. The deformation and recrystallization textures of the two tapes were thoroughly investigated by electron back scattering diffraction technique. The results showed...... that a shear texture mainly covered the surface of the heavy deformed tapes because of the fraction between the surface of rolling mills and the thin tapes when the rolling force strongly reduced at high strain, which significantly reduced the fraction of rolling texture on the surface of the Cu-45at %Ni alloy...

  16. PENGARUH ATMOSFER PUSAT BELANJA PADA SHOPPING VALUE

    Directory of Open Access Journals (Sweden)

    Astrid Kusumowidagdo

    2015-11-01

    Full Text Available AbstractAt the moment, the creation of shopping environment design that provides certain sensation and experience become strategy of the shopping center. This research aims to find out about the influence of shopping center’s atmosphere towards shopping value. The formative factors of shopping centre’s atmosphere are architectural features, interior features and support facilities. The research begins with a focus group to adjust the indicators of the previous research to the present research’s object. The next stage of research is done with a multiple regression analysis. The research object is the atmosphere condition of Senayan City shopping center in Jakarta and the subjects are samples totaling to sixty people. The samples are visitors from the middle-class segment between the age of 18-35.The research finds that architectural features, interior features and support facilities collectively bring an influence towards shopping value in Senayan City Pusat belanja, wether partially, only interior features show the significant influence towards shopping value.Keywords: design, atmosphere, shopping centre, shopping value.AbstrakSaat ini penciptaan lingkungan belanja dengan yang memberikan sensasi dan pengalaman telah menjadi bagian dari strategi bisnis pusat belanja. Penelitian ini bertujuan untuk menelusuri pengaruh atmosfer pusat belanja terhadap shopping value. Atmosfer pusat belanja dibentuk oleh faktor-faktor yaitu fitur arsitektur, fitur interior dan fasilitas penunjang. Penelitian ini diawali dengan focus group untuk penentuan indikator yang tepat dan dilanjutkan dengan survey pada 60 orang dengan usia 18-35 tahun yang bersegmen menengah. Obyek penelitian adalahatmosfer dari pusat belanja Senayan City. Hasil penelitian menunjukkan terdapat hubungan dari faktor-faktor atmosfer pusat belanja secara serempak pada shopping value, sedangkan secara parsial hanya fitur interior yang memberikan pengaruh signifikan pada shopping value

  17. Uranium Mill Tailings Management

    International Nuclear Information System (INIS)

    Nelson, J.D.

    1982-01-01

    This book presents the papers given at the Fifth Symposium on Uranium Mill Tailings Management. Advances made with regard to uranium mill tailings management, environmental effects, regulations, and reclamation are reviewed. Topics considered include tailings management and design (e.g., the Uranium Mill Tailings Remedial Action Project, environmental standards for uranium mill tailings disposal), surface stabilization (e.g., the long-term stability of tailings, long-term rock durability), radiological aspects (e.g. the radioactive composition of airborne particulates), contaminant migration (e.g., chemical transport beneath a uranium mill tailings pile, the interaction of acidic leachate with soils), radon control and covers (e.g., radon emanation characteristics, designing surface covers for inactive uranium mill tailings), and seepage and liners (e.g., hydrologic observations, liner requirements)

  18. Microstructure and properties of hot roll bonding layer of dissimilar metals. 2. Bonding interface microstructure of Zr/stainless steel by hot roll bonding and its controlling

    International Nuclear Information System (INIS)

    Yasuyama, Masanori; Ogawa, Kazuhiro; Taka, Takao; Nakasuji, Kazuyuki; Nakao, Yoshikuni; Nishimoto, Kazutoshi.

    1996-01-01

    The hot roll bonding of zirconium and stainless steel inserted with tantalium was investigated using the newly developed rolling mill. The effect of hot rolling temperatures of zirconium/stainless steel joints on bonding interface structure was evaluated. Intermetallic compound layer containing cracks was observed at the bonding interface between stainless steel and tantalium when the rolling temperature was above 1373K. The hardness of the bonding layer of zirconium and tantalium bonded above 1273K was higher than tantalium or zirconium base metal in spite of absence of intermetallic compound. The growth of reaction layer at the stainless steel and tantalium interface and at the tantalium and zirconium interface was conforming a parabolic low when that was isothermally heated after hot roll bonding, and the growth rate was almost same as that of static diffusion bonding without using hot roll bonding process. It is estimated that the strain caused by hot roll bonding gives no effect on the growth of reaction layer. It was confirmed that the dissimilar joint of zirconium and stainless steel with insert of tantalium having the sound bonding interface were obtained at the suitable bonding temperature of 1173K by the usage of the newly developed hot roll bonding process. (author)

  19. FM Interviews: Stephanie Mills

    OpenAIRE

    Valauskas, Edward

    2002-01-01

    Stephanie Mills is an author, editor, lecturer and ecological activist who has concerned herself with the fate of the earth and humanity since 1969, when her commencement address at Mills College in Oakland, Calif., drew the attention of a nation. Her speech, which the New York Times called "perhaps the most anguished statement" of the year's crop of valedictory speeches, predicted a bleak future. According to Mills, humanity was destined for suicide, the result of overpopulation and overuse ...

  20. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  1. Roll of honour

    Energy Technology Data Exchange (ETDEWEB)

    Moxon, Suzanne

    1999-07-01

    This article gives details of the design and construction of dams selected by members of the dam construction industry for praise as feats of construction. The dams covered in the roll of honour include the dam at the Guri hydroelectric power station in Venezuela on the Caroni river, the Contra dam on the Verzrasca river in Switzerland, and the double curvature arc Ertan dam on the Yalong river in China. (UK)

  2. Online Shop System with Zencart

    OpenAIRE

    Uqbah Iqbal

    2016-01-01

    Written by Sabri Saifulsham and Syazwan Saifulsham, this book has eleven chapters that using quantitative research methodology to describes the three main components of success in building and managing online shops, namely the potential of products, obtain product and build and manage online stores. All three of these components are combined into a single system that can help anyone to build an online store even if no basic technical skills. The measures described also make it easy to use Zen...

  3. Design of online shopping system

    OpenAIRE

    Li, Yueyuan

    2011-01-01

    E-commerce is a kind of comprehensive activity of management automation, business information network and financial electronic technology. It is a kind of commercial activity accomplished through the information network in all kinds of business activities in the world. As a new marketing model, the emergence of online stores is an epoch-making revolution in the field of product circulation. The thesis focuses on a study of how to design a small online shopping system which is simple and f...

  4. Shopping Problems among High School Students

    Science.gov (United States)

    Grant, Jon E.; Potenza, Marc N.; Krishnan-Sarin, Suchitra; Cavallo, Dana A.; Desai, Rani A.

    2010-01-01

    Background Although shopping behavior among adolescents is normal, for some the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. Methods A large sample of high school students (n=3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. Results The overall prevalence of problem shopping was 3.5% (95%CI: 2.93–4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Conclusion Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. PMID:21497217

  5. Shopping problems among high school students.

    Science.gov (United States)

    Grant, Jon E; Potenza, Marc N; Krishnan-Sarin, Suchitra; Cavallo, Dana A; Desai, Rani A

    2011-01-01

    Although shopping behavior among adolescents is normal, for some, the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. A large sample of high school students (n = 3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. The overall prevalence of problem shopping was 3.5% (95% CI, 2.93-4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. Copyright © 2011 Elsevier Inc. All rights reserved.

  6. THE INFLUENCE OF HEDONIC SHOPPING MOTIVATION TO THE IMPULSE BUYING OF ONLINE-SHOPPING CONSUMER ON INSTAGRAM

    OpenAIRE

    Asnawati; Wahyuni S.

    2018-01-01

    This research aims to know the influence of Adventure Shopping, Relaxation Shopping, Value Shopping, Social Shopping and Idea Shopping variables to the variable of Impulse Buying of Online-Shopping Consumer on Instagram. The type of the research is explanatory research. The result of F-test showed that Fcount (12.829) > Ftable (2.669) which meant that research variables had influences to the Impulse Buying. With partial correlation value of 0.548, Idea Shopping variable became the dominant fa...

  7. The Effect of Rolling As-Cast and Homogenized U-10Mo Samples on the Microstructure Development and Recovery Curves

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Vineet V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-07-30

    Over the past several years Pacific Northwest National Laboratory (PNNL) has been actively involved in supporting the U.S. Department of Energy National Nuclear Security Administration Office of Material Management and Minimization (formerly Global Threat Reduction Initiative). The U.S. High- Power Research Reactor (USHPRR) project is developing alternatives to existing highly enriched uranium alloy fuel to reduce the proliferation threat. One option for a high-density metal fuel is uranium alloyed with 10 wt% molybdenum (U-10Mo). Forming the U-10Mo fuel plates/foils via rolling is an effective technique and is actively being pursued as part of the baseline manufacturing process. The processing of these fuel plates requires systematic investigation/understanding of the pre- and post-rolling microstructure, end-state mechanical properties, residual stresses, and defects, their effect on the mill during processing, and eventually, their in-reactor performance. In the work documented herein, studies were conducted to determine the effect of cold and hot rolling the as-cast and homogenized U-10Mo on its microstructure and hardness. The samples were homogenized at 900°C for 48 h, then later annealed for several durations and temperatures to investigate the effect on the material’s microstructure and hardness. The rolling of the as-cast plate, both hot and cold, was observed to form a molybdenum-rich and -lean banded structure. The cold rolling was ineffective, and in some cases exacerbated the as-cast defects. The grains elongated along the rolling direction and formed a pancake shape, while the carbides fractured perpendicularly to the rolling direction and left porosity between fractured particles of UC. The subsequent annealing of these samples at sub-eutectoid temperatures led to rapid precipitation of the ' lamellar phase, mainly in the molybdenum-lean regions. Annealing the samples above the eutectoid temperature did not refine the grain size or the banded

  8. Measuring consumer perceptions of online shopping convenience

    OpenAIRE

    Ferreira, Margarida Bernardo

    2016-01-01

    The aim of this master thesis is to identify which dimensions of convenience affect consumers’ intention of using online shopping. Also it explores a conceptual model to measuring consumer perceptions of online shopping convenience. This paper contains prospects about online consumer behavior, and the results have important implications for retailers, managers and marketers, related to online shopping strategies. An empirical investigation was carried out to test the hypotheses. In order t...

  9. Cellular Phone Users- Willingness to Shop Online

    OpenAIRE

    Norazah Mohd Suki; Norbayah Mohd Suki

    2009-01-01

    This study aims to identify cellular phone users- shopping motivating factors towards online shopping. 100 university students located in Klang Valley, Malaysia were involved as the respondents. They were required to complete a set of questionnaire and had to own a cellular phone in order to be selected as sample in this study. Three from five proposed hypotheses were supported: purchasing information, shopping utilities and service quality. As a result, marketers and retailers should concent...

  10. Determinants Of Online Shopping In Manado

    OpenAIRE

    Halim, Ellen

    2013-01-01

    Retailers utilize online media to reach more potential customers. Internet connects the retailer and customers without any geographic location boundaries. Internet growth has a positive impact for business world. There is a new shopping method in non-store shopping as people can buy products or services without having to travel to the outlets like traditional retail does. With the increase of online retailers on internet world, online shopping became popular. The objective of this research is...

  11. Reflexivity in performative science shop projects

    OpenAIRE

    Beunen, R.; Duineveld, M.; During, R.; Straver, G.H.M.B.; Aalvanger, A.

    2012-01-01

    Science shop research projects offer possibilities for universities to engage with communities. Many science shop projects directly or indirectly intend to empower certain marginalised groups or interests within a decision-making process. In this article we argue that it is important to reflect on the role and position the researchers have in these projects. We present three science shop projects to illustrate some of the dilemmas that may arise in relation to citizen empowerment, democracy, ...

  12. Passion and dependency in online shopping activities.

    Science.gov (United States)

    Wang, Chih-Chien; Yang, Hui-Wen

    2007-04-01

    This study examines the influence of harmonious passion (HP) and obsessive passion (OP) to online shopping dependency. The results show that both HP and OP might lead to online shopping dependency and online shoppers with OP are more dependent on online shopping activities. In addition, this study also found out that HP and OP could be denoted as a sequence of different intensities of passion, where HP might be a necessity of OP.

  13. CONSUMER BEHAVIOUR AND ATTITUDE TOWARDS ONLINE SHOPPING

    OpenAIRE

    S. Nethra; Dr. V. T. Dhanaraj

    2016-01-01

    The popularity of online shopping has caught the attention of many peoples. Many studies have been done in developed nations to know about the attitude and behaviour of consumers towards online shopping. The research is focused on consumer behaviour and attitude towards online shopping in Coimbatore district. The study is based on primary data which has been collected by issuing questionnaire to 200 respondents residing in Coimbatore district by adopting convenient sampling method. The stat...

  14. INDONESIAN CUSTOMER SATISFACTION IN ONLINE SHOPPING TRADING

    OpenAIRE

    Hermawan F.; Wijayanti S.H.

    2018-01-01

    This research aims to find out if the ease of shopping, site design, informative, comprehensive, and communication have a significant influence on the level of Indonesian customer satisfaction in online shopping transactions and how the impact to the word of mouth communication. Respondents of this study are the 250 students of Jakarta colleges. This study found that the variables of design, simplicity, and security have an influence on customer satisfaction in shopping online, while the info...

  15. The influences of social e-shopping in enhancing young women’s online shopping behaviour

    OpenAIRE

    Dennis, C; Morgan, A; Wright, LT; Jayawardhena, C

    2010-01-01

    Copyright @ 2010 Westburn Publishers Ltd The background to this paper is that shoppers, particularly women, are motivated by a variety of different reasons, including socialising and enjoyment. Despite the growth of Internet retailing (e-retailing), these social needs are largely unmet in e-shopping. In the high street, women do most of the shopping but online shopping (e-shopping) tends to be dominated by male shoppers. At the same time, social networking is growing fast and is especially...

  16. INDONESIAN CUSTOMER SATISFACTION IN ONLINE SHOPPING TRADING

    Directory of Open Access Journals (Sweden)

    Hermawan F.

    2018-03-01

    Full Text Available This research aims to find out if the ease of shopping, site design, informative, comprehensive, and communication have a significant influence on the level of Indonesian customer satisfaction in online shopping transactions and how the impact to the word of mouth communication. Respondents of this study are the 250 students of Jakarta colleges. This study found that the variables of design, simplicity, and security have an influence on customer satisfaction in shopping online, while the informative variable and communication have no influence on the customer's satisfaction online shopping.

  17. Designing electronic shops, persuading consumers to buy

    DEFF Research Database (Denmark)

    Dormann, Claire

    2000-01-01

    The purpose of this article is to show how to design persuasive and successful Web shops. An approach to commercial site design that draws on theories of visual persuasion is proposed. We focus on the role of emotion. Images in an ad are typically meant to create some emotional disposition toward....... To strengthen the discussion, an evaluation of shop home pages, situated within the perspective of visual persuasion is presented. This study has given some indications that viewers form distinctive emotional impressions from shop designs. Thus, by building on visual persuasion theories, we can learn how...... to design seductive Web shops....

  18. Social Sustainability of Shopping Streets in Ankara

    Directory of Open Access Journals (Sweden)

    Özge YALÇINER ERCOŞKUN

    2013-02-01

    Full Text Available Shopping streets are integral parts of public spaces in traditional shopping areas of Central Business Districts (CBD. Furthermore, as modern shopping venues, shopping centers offer advantages for modern lifestyles with spacious shopping areas, variety of commercial and social activities, and economic value of their investments. These advantages act in favor of shopping centers and improve the level of shopping street social sustainability and its relevant concepts. The aim of this study is to analyze the main shopping streets of Ankara, using the concepts of social sustainability. In this study, these concepts, such as locality, identity, vitality, viability, sense of place, conviviality, meaning and local characteristics of the shopping streets are investigated. For the first time, the retail unit locations in Ankara, their brands and their business types, are illustrated on thematic land use maps using Geographical Information Systems (GIS software. Next, population activities and consumer spatial behavior are observed and marked on maps that are also referred to as social sustainability maps. The results of the study can be useful in formulating strategies within the framework of social sustainability, which is a relatively new concept.

  19. Strategy of image management in retail shops

    Directory of Open Access Journals (Sweden)

    Sandra Soče Kraljević

    2007-12-01

    Full Text Available A sound positioning in consumers’ mind, along with strong promotion support, brought many retail shops to the top. This is mostly thanks to the image created in the consumers’ mind. A retail shop’s image may but need not conform to reality. Image often looks like a cliché. It overstates certain elements of the shop while simply omitting others. That is exactly why image is of great importance and often crucial to consumer behavior. This paper aims at determining the impact of image on customer behavior in the course of decision making about shopping and choosing a particular retail shop. Image is a significant factor of success of every company, hence also of a retail shops. It is a relatively strong value and a component of creating competitive advantage. But if we do not pay sufficient attention to image, it can become counterproductive. Instead to, like an additional value helps creating and maintaining the advantage in competition and realization of business aims, transforms into a limiting factor. Therefore, it is imperative to identify the elements of image that are of greatest importance to customers. Research has shown that customers choose the retail shop first and after that products and brands within this shop. When it comes to the supermarket, as a kind of retail shop, research has shown that two out of three shopping decisions are made by the customer on the spot, that is, without previous planning. That practically means that we can influence customers with different sales techniques. The paper suggests different strategies of image management for supermarkets and conventional shops. For supermarkets it is the “widest assortment” strategy, while for conventional shops the strategy is that of a “selected group of products“. Improvements to research methods will enable getting more information about customer behavior, while pressures of increased competition in the business environment will force retailers to get

  20. Roll back malaria update.

    Science.gov (United States)

    1999-10-01

    This article presents the activities under WHO's Roll Back Malaria (RBM) program in Asia, particularly in Nepal, Indonesia, India, Bangladesh, Sri Lanka and the Philippines. In India, the RBM program will start in 5 districts with a major malaria problem. A national committee has been formed by researchers, which will be able to provide operational and strategic support and research expertise in relation to malaria. In Bangladesh, the RBM program was initiated in the sparsely populated hill tract areas of Banderban and Chittagong where access to health care is very poor. At the district level, effective partnerships with private practitioners, politicians, community leaders, school teachers, the press and district Ministry of Health officials are operating to plan for rolling back malaria. In Myanmar, Cambodia, Lao People's Democratic Republic, Yunnan province of China, Vietnam, and Thailand, the focus of the RBM program was to move health care closer to the malaria-infected communities. WHO¿s Global Health Leadership Fellowship Programme, supported by the UN Foundation and Rockefeller Foundation, enables potential leaders to experience the work of UN agencies and contribute to the work of the organization for 2 years. Three out of four persons appointed to the RBM program received prestigious awards: Dr. Paola Marchesini of Brazil; Dr. Tieman Diarra of Mali; and Dr. Bob Taylor of the UK.

  1. Roll-to-roll UV imprint lithography for flexible electronics

    NARCIS (Netherlands)

    Maury, P.; Turkenburg, D.H.; Stroeks, N.; Giesen, P.; Barbu, I.; Meinders, E.R.; Bremen, A. van; Iosad, N.; Werf, R. van der; Onvlee, H.

    2011-01-01

    We propose a roll-to-roll UV imprint lithography tool as a way to pattern flexible PET foil with µm-resolution. As a way to overcome dimensional instability of the foil and its effect on overlay, a self-align approach was investigated, that permits to make several layers in a single lithography

  2. RELATIONSHIP BETWEEN ROLLING AND SLIP RESISTANCE IN ROLLING BEARINGS

    Directory of Open Access Journals (Sweden)

    L. M. Bondarenko

    2016-06-01

    Full Text Available Purpose. About one of the causes of slip rolling is known from the second half of the 19th century, it was believed that the slip resistance appears at the place of contact due to different speeds on the arc of contact. Only in the mid-20th century it was proved that this resistance is negligible in rolling resistance. However (for some unknown reason it is ignored the fact that in practice in rolling bearings may rotate both the inner ring with a stationary outer one, and vice versa almost in equal relations. It is not taken into account the fact that the ball or roller in the rolling bearings runs the different distance along the roller path of the outer and inner bearing cages in one revolution. This fact is not taken into account in determining the calculated values for the friction coefficient of a rolling bearing reduced to the shaft. Therefore, the aim of this work is to determine the influence of path length on the track riding the outer and inner race of the bearing on the determination of the calculated value of the coefficient of friction of rolling bearings is given to the shaft. Methodology. The solution technique is based on the theory of plane motion of a rigid body, the theory of Hertzian contact deformation and the analytical dependencies for determination of coefficient of rolling friction. Findings. The obtained dependences on determination of rolling resistance of the balls or rollers along the bearing tracks of inner and outer bearing cages as well as path difference metering of the rolling on them allows to analytically obtain the rolling resistance and slipping for any size of bearings and different devices of bearing units. It is also possible at the design stage of rolling nodes to handle not only the design but also the content of the node. Originality. Using the analytical dependences for determination of the rolling resistance of bodies at point and line contacts, and also account for the difference in the path of the

  3. Optimal Cluster Mill Pass Scheduling With an Accurate and Rapid New Strip Crown Model

    International Nuclear Information System (INIS)

    Malik, Arif S.; Grandhi, Ramana V.; Zipf, Mark E.

    2007-01-01

    Besides the requirement to roll coiled sheet at high levels of productivity, the optimal pass scheduling of cluster-type reversing cold mills presents the added challenge of assigning mill parameters that facilitate the best possible strip flatness. The pressures of intense global competition, and the requirements for increasingly thinner, higher quality specialty sheet products that are more difficult to roll, continue to force metal producers to commission innovative flatness-control technologies. This means that during the on-line computerized set-up of rolling mills, the mathematical model should not only determine the minimum total number of passes and maximum rolling speed, it should simultaneously optimize the pass-schedule so that desired flatness is assured, either by manual or automated means. In many cases today, however, on-line prediction of strip crown and corresponding flatness for the complex cluster-type rolling mills is typically addressed either by trial and error, by approximate deflection models for equivalent vertical roll-stacks, or by non-physical pattern recognition style models. The abundance of the aforementioned methods is largely due to the complexity of cluster-type mill configurations and the lack of deflection models with sufficient accuracy and speed for on-line use. Without adequate assignment of the pass-schedule set-up parameters, it may be difficult or impossible to achieve the required strip flatness. In this paper, we demonstrate optimization of cluster mill pass-schedules using a new accurate and rapid strip crown model. This pass-schedule optimization includes computations of the predicted strip thickness profile to validate mathematical constraints. In contrast to many of the existing methods for on-line prediction of strip crown and flatness on cluster mills, the demonstrated method requires minimal prior tuning and no extensive training with collected mill data. To rapidly and accurately solve the multi-contact problem

  4. Doctor shopping: a concept analysis.

    Science.gov (United States)

    Worley, Julie; Hall, Joanne M

    2012-01-01

    Prescription drug abuse is a significant problem in the United States that poses a serious health risk to Americans and is therefore significant to the field of nursing. The prescription drugs that are designated in the United States as having abuse potential are called controlled or scheduled drugs. The most common types of abused prescription drugs are benzodiazepines prescribed for anxiety, opioids prescribed for pain, and stimulants prescribed for attention deficit disorder. These prescription drugs are abused by taking larger doses than prescribed for nonmedical use to achieve a high or euphoric feeling, or are sold illicitly for profit. In 2009, there were 2.4 million nonmedical users of prescription opioids in the United States. These prescription drugs are often obtained by seeing multiple prescribers, often under false pretenses or with complicity from the prescribers that leads to abuse and illicit sales. The term doctor shopping has been used not only to refer to this phenomenon but has also had other meanings throughout the past decades. Thus, concept analysis is the focus of this article for clarification using the Walker and Avant method. Health implications and suggestions for minimizing doctor shopping are included.

  5. Surface finishing and levelling of thermomechanically hardened rolled steel

    International Nuclear Information System (INIS)

    Grosval'd, V.G.; Bashchenko, A.P.; Grishkov, A.I.; Gutnik, M.V.; Kanevskij, B.L.; Nikozov, A.I.; Sedov, N.D.; Prosin, K.A.; Safonov, L.I.

    1975-01-01

    The finishing of high-strength merchant shapes from alloy steel was tried out under industrial conditions with the equipment of metallurgical plants. After thermomechanical hardening in the production line of the rolling mill, 30KhGSN2A and 40Kh1NVA steel rounds 32 and 31 mm in diameter were straightened on a two-roller straightening machine designed by the All-Union Scientific Research Institute for Metallurgical Machinery (VNII Metmash). This made possible subsequent turning and grinding of the rods. The conditions of straightening, turning and grinding have been worked so as to obtain thermomechanically strengthened and ground rolled products approximating the gauged and ground metal in shape geometry and surface finish. It is shown that the labour-consuming operation of turning can be eliminated by reducing the machining pass of the rolled product, and this lowers the labour required for the finishing operations by 75%. After grinding with 40- and 25-grain abrasive wheels, high strength rolled shapes were obtained with a diameter of 30-0.20 mm and a surface finish of class 6-5 satisfying the technical specifications. (author)

  6. Flexible job shop scheduling problem in manufacturing

    OpenAIRE

    Curralo, Ana; Pereira, Ana I.; Barbosa, José; Leitão, Paulo

    2013-01-01

    This paper addresses a real assembly cell: the AIP-PRIMECA cell at the Université de Valenciennes et du Hainaut-Cambrésis, in France. This system can be viewed as a Flexible Job Shop, leading to the formulation of a Flexible Job Shop Scheduling Problem (FJSSP).

  7. Product Characteristics and Internet Shopping Intentions.

    Science.gov (United States)

    Vijayasarathy, Leo R.

    2002-01-01

    Discussion of electronic commerce and online marketing focuses on an empirical study that investigated differences between Internet shopping intentions for products categorized by cost and tangibility. Highlights include hypotheses; respondent characteristics; results that showed that intentions to shop using the Internet differ by tangibility of…

  8. Rental Values in UK Shopping Malls

    NARCIS (Netherlands)

    Yuo, Tony Shun-Te; Lizieri, Colin; McCann, Phillip; Crosby, Neil

    This paper employs a unique dataset to analyse the retail rental levels of 1108 retail tenants in 148 UK regional shopping malls. The dataset integrates information regarding the characteristics of the shopping centre, the individual retailer, the brand, the individual unit occupied, the tenancy

  9. LEDs are on a roll

    NARCIS (Netherlands)

    Blom, P.W.M.; Mol, A.M.B. van

    2011-01-01

    Light-emitting diodes are more efficient than conventional lighting, but high production costs limit their uptake. Organic versions that can be produced using a cheap newspaper-style 'roll-to-roll' printing process are likely to revolutionize our lighting and signage, say Paul Blom and Ton van Mol.

  10. Anisotropic constant-roll inflation

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Asuka; Soda, Jiro [Kobe University, Department of Physics, Kobe (Japan)

    2018-01-15

    We study constant-roll inflation in the presence of a gauge field coupled to an inflaton. By imposing the constant anisotropy condition, we find new exact anisotropic constant-roll inflationary solutions which include anisotropic power-law inflation as a special case. We also numerically show that the new anisotropic solutions are attractors in the phase space. (orig.)

  11. Rolling up a Graphene Sheet

    NARCIS (Netherlands)

    Calvaresi, Matteo; Quintana, Mildred; Rudolf, Petra; Zerbetto, Francesco; Prato, Maurizio

    2013-01-01

    Carbon Nanotubes, CNTs, have been described as rolled-up graphene layers. Matching this concept to experiments has been a great experimental challenge for it requires a method to exfoliate graphite, generate ordered and stable dangling carbon bonds, and roll up the layer without affecting the

  12. Rudder roll stabilization for ships

    NARCIS (Netherlands)

    van Amerongen, J.; van der Klugt, P.G.M.; van Nauta lemke, H.R.

    1990-01-01

    This paper describes the design of an autopilot for rudder roll stabilization for ships. This autopilot uses the rudder not only for course keeping but also for reduction of the roll. The system has a series of properties which make the controller design far from straightforward: the process has

  13. Potential of Natural Ventilation in Shopping Centres

    DEFF Research Database (Denmark)

    Diederichsen, Alice; Friis, Kristina; Brohus, Henrik

    2008-01-01

    The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV) in shop......The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV......) in shopping centres with focus on both the achieved IEQ and energy consumptions for air movement. By thermal building simulations it is found that there exists an interesting potential for hybrid ventilation of shopping centres, which can lead to great savings in the electrical energy consumptions...

  14. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  15. THE INFLUENCE OF HEDONIC SHOPPING MOTIVATION TO THE IMPULSE BUYING OF ONLINE-SHOPPING CONSUMER ON INSTAGRAM

    Directory of Open Access Journals (Sweden)

    Asnawati

    2018-02-01

    Full Text Available This research aims to know the influence of Adventure Shopping, Relaxation Shopping, Value Shopping, Social Shopping and Idea Shopping variables to the variable of Impulse Buying of Online-Shopping Consumer on Instagram. The type of the research is explanatory research. The result of F-test showed that Fcount (12.829 > Ftable (2.669 which meant that research variables had influences to the Impulse Buying. With partial correlation value of 0.548, Idea Shopping variable became the dominant factor influencing Impulse Buying on the online-shopping purchase on Instagram.

  16. Branding on the Shop Floor

    Directory of Open Access Journals (Sweden)

    Szilvia Gyimóthy

    2010-09-01

    Full Text Available Service branding is a particular form of emotional management, where employees are regarded as adaptable media, who can be trained to convey corporate values while interacting with customers. This paper examines the identity work of butchers during the brand revitalisation campaign of Kvickly, a Danish supermarket chain. During the implementation of the “Best Butcher in Town”-project, Kvickly’s shop floor becomes an engineered servicescape where the norms of good salesmanship must be performed. By documenting the disloyal behaviour of butchers, we demonstrate that the affective commitment towards corporate brand values is closely related with self-enactment opportunities of occupational communities. Total service-orientation threatens butchers’ perception of autonomy and may therefore result in the emergence of resistant sub-cultures.

  17. Review on Parameters Influencing the Rice Breakage and Rubber Roll Wear in Sheller

    Directory of Open Access Journals (Sweden)

    Prabhakaran P.

    2017-09-01

    Full Text Available The present review deals with parameters influencing the rice breakage during rice milling operations and the effect of rubber roll Sheller in rice husk removal process. The main objective of rice milling system is to remove the husk and bran layer to produce the white rice. In this process, rubber roll sheller is used to remove husk from the grains by friction process. If the rubber material is too soft, there may not be sufficient shear force to husk the paddy. Wear will be minimum for rubber material with high hardness but indeed it pronounce the breakage of rice. Hence, for efficient husking the rubber roll material should possess the balance of physico-mechanical properties. Rice breakage depends on several other parameters like the type of harvest, drying temperature, drying methods, physical characteristics of paddy, husking characteristics, paddy moisture content, rubber roller speed, rubber roll pressure, paddy feed rate and fissures. Rubber roll wear depends on the type of rubber material attached to the roller, feed rate, roller speed, pressure etc.

  18. Roll bonding of strained aluminium

    DEFF Research Database (Denmark)

    Staun, Jakob M.

    2003-01-01

    This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...

  19. Manufacturing Demonstration Facility: Roll-to-Roll Processing

    Energy Technology Data Exchange (ETDEWEB)

    Datskos, Panos G [ORNL; Joshi, Pooran C [ORNL; List III, Frederick Alyious [ORNL; Duty, Chad E [ORNL; Armstrong, Beth L [ORNL; Ivanov, Ilia N [ORNL; Jacobs, Christopher B [ORNL; Graham, David E [ORNL; Moon, Ji Won [ORNL

    2015-08-01

    This Manufacturing Demonstration Facility (MDF)e roll-to-roll processing effort described in this report provided an excellent opportunity to investigate a number of advanced manufacturing approaches to achieve a path for low cost devices and sensors. Critical to this effort is the ability to deposit thin films at low temperatures using nanomaterials derived from nanofermentation. The overarching goal of this project was to develop roll-to-roll manufacturing processes of thin film deposition on low-cost flexible substrates for electronics and sensor applications. This project utilized ORNL s unique Pulse Thermal Processing (PTP) technologies coupled with non-vacuum low temperature deposition techniques, ORNL s clean room facility, slot dye coating, drop casting, spin coating, screen printing and several other equipment including a Dimatix ink jet printer and a large-scale Kyocera ink jet printer. The roll-to-roll processing project had three main tasks: 1) develop and demonstrate zinc-Zn based opto-electronic sensors using low cost nanoparticulate structures manufactured in a related MDF Project using nanofermentation techniques, 2) evaluate the use of silver based conductive inks developed by project partner NovaCentrix for electronic device fabrication, and 3) demonstrate a suite of low cost printed sensors developed using non-vacuum deposition techniques which involved the integration of metal and semiconductor layers to establish a diverse sensor platform technology.

  20. 48 CFR 252.227-7033 - Rights in shop drawings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

  1. 48 CFR 1952.227-77 - Rights in shop drawings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

  2. Dimensions of Consumer's Perceived Risk in Online Shopping

    Institute of Scientific and Technical Information of China (English)

    YE Naiyi

    2004-01-01

    Perceived risk is an important concept in consumer behavior in online shopping. It impedes the adopting online shopping. A structure model with seven factors of consumer's perceived risk in online shopping is developed in this paper. The results have the descriptive power about Chinese consumers' perceived risk in Internet shopping and provide framework for managerial use in China's e-commerce market environment.

  3. Youth Clothes-Shopping Behavior: An Analysis by Gender.

    Science.gov (United States)

    Peters, John F.

    1989-01-01

    Explored possible gender differences in clothes-shopping behavior among adolescents. Findings from 387 college students revealed that: parents financially assisted sons and daughters equally; there was no gender difference in shopping frequency; mothers more frequently shopped with sons than with daughters; fathers rarely shopped with any…

  4. Effect of the milling conditions on the degree of amorphization of selenium by milling in a planetary ball mill

    International Nuclear Information System (INIS)

    Ksiazek, K; Wacke, S; Gorecki, T; Gorecki, Cz

    2007-01-01

    The effect of the milling parameters (rotation speed of the milling device and duration of milling) on the phase composition of the products of milling of fully crystalline selenium has been investigated. The milling was conducted using a planetary micromill and the phase composition of the milling products was determined by differential thermal analysis. It has been found that ball milling leads to the partial amorphization of the starting crystalline material. The content of amorphous phase in the milling products depends, in a rather complicated way, on the milling parameters. At the milling parameters adopted in the present study, the milling product was never fully amorphous. The complicated way the milling parameters affect the content of amorphous phase in the milling products is a result of competition of two processes: amorphization due to deformation and refinement of grains of milled material and crystallization of the already produced amorphous material at the cost of heat evolved in the milling vial during the milling process

  5. Rolling Process Modeling Report: Finite-Element Prediction of Roll Separating Force and Rolling Defects

    Energy Technology Data Exchange (ETDEWEB)

    Soulami, Ayoub [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-04-23

    Pacific Northwest National Laboratory (PNNL) has been investigating manufacturing processes for the uranium-10% molybdenum (U-10Mo) alloy plate-type fuel for the U.S. high-performance research reactors. This work supports the Convert Program of the U.S. Department of Energy’s National Nuclear Security Administration (DOE/NNSA) Global Threat Reduction Initiative. This report documents modeling results of PNNL’s efforts to perform finite-element simulations to predict roll separating forces and rolling defects. Simulations were performed using a finite-element model developed using the commercial code LS-Dyna. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel have been conducted following two different schedules. Model predictions of the roll-separation force and roll-pack thicknesses at different stages of the rolling process were compared with experimental measurements. This report discusses various attributes of the rolled coupons revealed by the model (e.g., dog-boning and thickness non-uniformity).

  6. Consumers’ Attitude towards Online Shopping : Factors influencing Gotland consumers to shop online

    OpenAIRE

    Sultan, Muhammad Umar; Uddin, Md. Nasir

    2011-01-01

    In the era of globalization electronic marketing is a great revolution.  Over the last decade maximum business organizations are running with technological change.  Online shopping or marketing is the use of technology (i.e., computer) for better marketing performance. And retailers are devising strategies to meet the demand of online shoppers; they are busy in studying consumer behavior in the field of online shopping, to see the consumer attitudes towards online shopping. Therefore we have ...

  7. Systematics of constant roll inflation

    Science.gov (United States)

    Anguelova, Lilia; Suranyi, Peter; Wijewardhana, L. C. R.

    2018-02-01

    We study constant roll inflation systematically. This is a regime, in which the slow roll approximation can be violated. It has long been thought that this approximation is necessary for agreement with observations. However, recently it was understood that there can be inflationary models with a constant, and not necessarily small, rate of roll that are both stable and compatible with the observational constraint ns ≈ 1. We investigate systematically the condition for such a constant-roll regime. In the process, we find a whole new class of inflationary models, in addition to the known solutions. We show that the new models are stable under scalar perturbations. Finally, we find a part of their parameter space, in which they produce a nearly scale-invariant scalar power spectrum, as needed for observational viability.

  8. Uranium mill tailings

    International Nuclear Information System (INIS)

    McLaren, L.H.

    1982-11-01

    This bibliography contains information on uranium mill tailings included in the Department of Energy's Energy Data Base from January 1981 through October 1982. The abstracts are grouped by subject category as shown in the table of contents. Entries in the subject index also facilitate access by subject, e.g., Mill Tailings/Radiation Hazards. Within each category the arrangement is by report number for reports, followed by nonreports in reverse chronological order. These citations are to research reports, journal articles, books, patents, theses, and conference papers from worldwide sources. Five indexes, each preceded by a brief description, are provided: Corporate Author, Personal Author, Subject, Contract Number, and Report Number. (335 abstracts)

  9. Uranium mining and milling

    International Nuclear Information System (INIS)

    Floeter, W.

    1976-01-01

    In this report uranium mining and milling are reviewed. The fuel cycle, different types of uranium geological deposits, blending of ores, open cast and underground mining, the mining cost and radiation protection in mines are treated in the first part of this report. In the second part, the milling of uranium ores is treated, including process technology, acid and alkaline leaching, process design for physical and chemical treatment of the ores, and the cost. Each chapter is clarified by added figures, diagrams, tables, and flowsheets. (HK) [de

  10. ShopComm: Community-Supported Online Shopping for Older Adults.

    Science.gov (United States)

    Gorkovenko, Katerina; Tigwell, Garreth W; Norrie, Christopher S; Waite, Miriam; Herron, Daniel

    2017-01-01

    The United Kingdom has an ageing population whose members experience significant life transitions as they grow older, for example, losing mobility due to deteriorating health. For these adults, digital technology has the potential to sustain their independence and improve their quality of life. However older adults can be reluctant to use digital solutions. In this paper, we review a local charity providing a grocery shopping service for older adults who are unable to go themselves. We explore how older adults perceive the benefits and drawbacks of both physical and digital shopping. Using these insights, we designed ShopComm to enable and support older adults with mobility impairments to shop online.

  11. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  12. Job shop scheduling by local search

    NARCIS (Netherlands)

    Aarts, E.H.L.; Lenstra, J.K.; Laarhoven, van P.J.M.; Ulder, N.L.J.

    1992-01-01

    We present a computational performance analysis of local search algorithms for job shop scheduling. The algorithms under investigation are iterative improvement, simulated annealing, threshold accepting and genetic local search. Our study shows that simulated annealing performs best in the sense

  13. Public Relations Program for a Shopping Mall.

    Science.gov (United States)

    Feigley, David A.

    1980-01-01

    An account is given of a highly successful sports, health, and recreation exhibit run by Rutgers University (New Jersey) in a public shopping mall. Organization and entertainment were the keynotes of the success. (LH)

  14. Profiling the Shopping Behavior of Elderly Consumers.

    Science.gov (United States)

    Mason, J. Barry; Bearden, William O.

    1978-01-01

    Data were collected by personal interview on shopping roles, information processing, food stamp and coupon use, store brand purchases, mispricing and product unavailability experiences, and with familiarity with fair trade practices. Implications and directions for further research are suggested. (Author)

  15. Rolling Resistance Measurement and Model Development

    DEFF Research Database (Denmark)

    Andersen, Lasse Grinderslev; Larsen, Jesper; Fraser, Elsje Sophia

    2015-01-01

    There is an increased focus worldwide on understanding and modeling rolling resistance because reducing the rolling resistance by just a few percent will lead to substantial energy savings. This paper reviews the state of the art of rolling resistance research, focusing on measuring techniques, s......, surface and texture modeling, contact models, tire models, and macro-modeling of rolling resistance...

  16. The 3D virtual environment online for real shopping

    OpenAIRE

    Khalil, Nahla

    2015-01-01

    The development of information technology and Internet has led to rapidly progressed in e-commerce and online shopping, due to the convenience that they provide consumers. E-commerce and online shopping are still not able to fully replace onsite shopping. In contrast, conventional online shopping websites often cannot provide enough information about a product for the customer to make an informed decision before checkout. 3D virtual shopping environment show great potential for enhancing e-co...

  17. RURAL CUSTOMER SATISFACTION TOWARDS ONLINE SHOPPING IN POLLACHI TALUK

    OpenAIRE

    K. Jayaprakash; A. Pavithra

    2017-01-01

    Online shopping is a recent phenomenon in electronic commerce and its definitely going to be the future of shopping in the world. It is user friendly compare to in store shopping because consumers can just complete his requirements just with a click of mouse without leaving their home. In the present work, the researcher intended to analyze the most preferred online shopping website, factors influencing the rural customers towards online shopping and to analyze the level satisfaction of the ...

  18. Flow shop scheduling with heterogeneous workers

    OpenAIRE

    Benavides, Alexander J.; Ritt, Marcus; Miralles Insa, Cristóbal Javier

    2014-01-01

    We propose an extension to the flow shop scheduling problem named Heterogeneous Flow Shop Scheduling Problem (Het-FSSP), where two simultaneous issues have to be resolved: finding the best worker assignment to the workstations, and solving the corresponding scheduling problem. This problem is motivated by Sheltered Work centers for Disabled, whose main objective is the labor integration of persons with disabilities, an important aim not only for these centers but for any company d...

  19. A hybrid job-shop scheduling system

    Science.gov (United States)

    Hellingrath, Bernd; Robbach, Peter; Bayat-Sarmadi, Fahid; Marx, Andreas

    1992-01-01

    The intention of the scheduling system developed at the Fraunhofer-Institute for Material Flow and Logistics is the support of a scheduler working in a job-shop. Due to the existing requirements for a job-shop scheduling system the usage of flexible knowledge representation and processing techniques is necessary. Within this system the attempt was made to combine the advantages of symbolic AI-techniques with those of neural networks.

  20. IS ONLINE GROCERY SHOPPING INCREASING IN STRENGTH?

    OpenAIRE

    Corbett, James J.

    2001-01-01

    Online grocery shopping is a relatively new innovation with regard to the way in which one purchases groceries. Some interesting concepts- designed to enhance the process of making grocery products available for consumption of the ever-changing consumer- have entered the food distribution industry channels. A telephone survey was conducted in the Boston trading area to determine the profile of online grocery consumers who are familiar with online grocery shopping.

  1. Chinese and Finnish Undergraduates’ Online Shopping Behaviour

    OpenAIRE

    Wan, Ning

    2015-01-01

    The main goal of the thesis was to recognise similar and different characteristics of online shopping behaviour between Chinese and Finnish undergraduates. Additionally, this thesis would give meaningful proposals for merchants and managers on offering better online marketing. This thesis report was conducted in both theoretical and practical parts. The theoretical parts include marketing research and online shopping consumption behaviour. The study describes the marketing research progre...

  2. Eesti õpetajate roll laste internetikasutuse sotsiaalses vahendamises

    Directory of Open Access Journals (Sweden)

    Kadri Soo

    2015-11-01

    Full Text Available Õpetajatel on oluline roll laste ettevalmistamisel internetimaailmas toimetulekuks. Artiklis analüüsitakse Eesti õpetajate tegevust 9–16aastaste laste internetikasutuse sotsiaalses vahendamises, mille mõõtmiseks kasutati kaheksat tunnust EU Kids Online’i uuringust. Tulemused näitavad, et enamik Eesti õpetajatest on õpilaste internetikasutust sotsiaalselt vahendanud: üksnes 13% lastest ei suutnud meenutada, et nad oleks õpetajatelt kunagi juhiseid või informatsiooni saanud. Peamised erinevused Eesti õpetajate tegevuses ilmnesid keele ja asula suuruse puhul. Uuring lubab väita, et eesti keelt rääkivate ja väikestest asulatest pärit laste õpetajad vahendavad laste internetitegevusi aktiivsemalt ja mitmekülgsemalt ning pakuvad internetiohtude korral rohkem nõuandeid. See, kuidas on õpetajate tegevus ja laste kokkupuude internetiohtudega omavahel seotud, erineb vanuseja keelerühmiti. Internetis kahju kogemine ei ole seotud õpetajatepoolse sotsiaalse vahendamisega.  Summary

  3. Using CCT Diagrams to Optimize the Composition of an As-Rolled Dual-Phase Steel

    Science.gov (United States)

    Coldren, A. Phillip; Eldis, George T.

    1980-03-01

    A continuous-cooling transformation (CCT) diagram study was conducted for the purpose of optimizing the composition of a Mn-Si-Cr-Mo as-rolled dual-phase (ARDP) steel. The individual effects of chromium, molybdenum, and silicon on the allowable cooling rates were determined. On the basis of the CCT diagram study and other available information, an optimum composition was selected. Data from recent mill trials at three steel companies, involving steels with compositions in or near the newly recommended range, are presented and compared with earlier mill trial data. The comparison shows that the optimized composition is highly effective in making the steel's properties more uniform and reproducible in the as-rolled condition.

  4. Development of dissimilar metal transition joint by hot roll bonding technique

    International Nuclear Information System (INIS)

    Nagai, Takayuki; Takeda, Seiichiro; Tanaka, Yasumasa; Ogawa, Kazuhiro; Nakasuji, Kazuyuki; Ikenaga, Yoshiaki.

    1994-01-01

    Metallurgically bonded transition joints which enable to connect reprocessing equipments made of superior corrosion resistant valve metals (Ti-5Ta, Zr or Ti) with stainless steel piping is needed for nuclear fuel reprocessing plants. The authors have developed dissimilar metal transition joints between stainless steel and Ti-5Ta, Zr or Ti with an insert metal of Ta by the hot roll bonding process, using the newly developed mill called 'rotary reduction mill'. In the R and D program, appropriate bonding conditions in the manufacturing process of the joints were established. This report presents the structure of transition joints and the manufacturing process by the hot roll bonding technique. Then, the evaluation of mechanical and corrosion properties and the results of demonstration test of joints for practical use are described. (author)

  5. Development of dissimilar metal transition joint by hot roll bonding technique

    International Nuclear Information System (INIS)

    Nagai, Takayuki; Takeuchi, Masayuki; Takeda, Seiichiro; Shikakura, Sakae; Ogawa, Kazuhiro; Nakasuji, Kazuyuki; Kajimura, Haruhiko.

    1995-01-01

    Metallurgically bonded transition joints which enable to connect reprocessing equipments made of superior corrosion resistant valve metals (Ti-5Ta, Zr or Ti) with stainless steel piping is needed for nuclear fuel reprocessing plants. The authors have developed dissimilar metal transition joints between stainless steel and Ti-5Ta, Zr or Ti with an insert metal of Ta by the hot roll bonding process, using the newly developed mill called 'rotary reduction mill'. In the R and D program, appropriate bonding conditions in the manufacturing process of the joints were established. This report presents the structure of transition joints and the manufacturing process by hot roll bonding technique. Then, the evaluation of mechanical and corrosion properties and the results of demonstration test of joints for practical use are described. (author)

  6. Shopping online and/or in-store? A structural equation model of the relationships between e-shopping and in-store shopping

    OpenAIRE

    Farag, Sendy; Schwanen, Tim; Dijst, Martin

    2005-01-01

    Searching product information or buying goods online is becoming increasingly popular and could affect shopping trips. However, the relationship between e-shopping and in-store shopping is currently unclear. The aim of this study is to investigate empirically how the frequencies of online searching, online buying, and non-daily shopping trips relate to each other, after controlling for sociodemographic, land use, behavioral, and attitudinal characteristics. Data were collected from 826 respon...

  7. Why Shops Close Again : An Evolutionary Perspective on the Deregulation of Shopping Hours

    NARCIS (Netherlands)

    Kosfeld, M.

    1999-01-01

    This paper introduces a new perspective on the deregulation of shopping hours based on ideas from evolutionary game theory. We study a retail economy where shopping hours have been deregulated recently. It is argued that first, the deregulation leads to a coordination problem between store owners

  8. Optimal control of conditions of deformation during rolling the bar alloy from alloy steel

    International Nuclear Information System (INIS)

    Inatovich, Yu.V.; Shilov, V.A.; Shvarts, D.L.; Kudelin, S.P.

    2001-01-01

    A complex of programs for determining the optimal gaps between rollers during rolling of simple merchant sections of alloy steels of a wide brand assortment (12KhN3A, Kh17N2, Kh18N10T) was elaborated. Experience in calculations made according to the programs suggests advisability of their use in the automated design systems for roller calibration and for adjustment of section mills [ru

  9. daptive Filter Used as a Dynamic Compensator in Automatic Gauge Control of Strip Rolling Processes

    Directory of Open Access Journals (Sweden)

    N. ROMAN

    2010-12-01

    Full Text Available The paper deals with a control structure of the strip thickness in a rolling mill of quarto type (AGC – Automatic Gauge Control. It performs two functions: the compensation of errors induced by unideal dynamics of the tracking systems lead by AGC system and the control adaptation to the change of dynamic properties of the tracking systems. The compensation of dynamical errors is achieved through inverse models of the tracking system, implemented as adaptive filters.

  10. The effect of roll gap geometry on microstructure in cold-rolled aluminum

    DEFF Research Database (Denmark)

    Mishin, Oleg; Bay, B.; Winther, G.

    2004-01-01

    Microstructure and texture are analyzed through the thickness of two aluminum plates cold-rolled 40% with different roll gap geometries. It is found that both texture and microstructure are strongly affected by the rolling geometry. After rolling with intermediate-size draughts a rolling-type tex......Microstructure and texture are analyzed through the thickness of two aluminum plates cold-rolled 40% with different roll gap geometries. It is found that both texture and microstructure are strongly affected by the rolling geometry. After rolling with intermediate-size draughts a rolling...... layers. In these layers, extended planar dislocation boundaries are frequently found to be inclined closely to the rolling direction. The subsurface and central layers of this plate exhibit microstructures similar to those in the plate rolled with intermediate draughts. It is suggested...

  11. Science Shops - a concept for community based learning

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Hende, Merete

    2001-01-01

    Experience from science shops show that besides assisting citizen groups, science shops can also contribute to the development of university curricula and research. The paper is based on an investigation of the impact of science shops on university curricula and research through a questionnaire...... sent out to science shops and through follow-up interviews with employees from nine different university based science shops. These science shops had in the questionnaire indicated that the science shop in one way or the other has had impact on university curricula and/or research. This paper focuses...... on the impact on university curricula. The case studies have been supplemented with articles and reports. The analysis has focused on the kind of impact, which the science shops have reported, and has tried to relate the impact to the local history of the science shop. One direct impact on the curricula...

  12. Supporting the Supermarket Shopping Experience through a Context-Aware Shopping Trolley

    DEFF Research Database (Denmark)

    Black, Darren; Clemmensen, Nils Jakob; Skov, Mikael B.

    2009-01-01

    Shopping in the real world is becoming an increasingly interactive experience as stores integrate various technologies to support shoppers. Based on an empirical study of supermarket shoppers, we designed a mobile context-aware system called the Context- Aware Shopping Trolley (CAST). The aim...... of the system is to support shopping in supermarkets through context-awareness and acquiring user attention. Thus, the interactive trolley guides and directs shoppers in the handling and finding of groceries. An empirical evaluation showed that shoppers using CAST adapted in different shopping behavior than...... traditional trolley shoppers by exhibiting a more uniform behavior in terms of product sequence collection and ease of finding products and thus, CAST supported the shopping experience....

  13. Evaluation of End Mill Coatings

    Energy Technology Data Exchange (ETDEWEB)

    L. J. Lazarus; R. L. Hester,

    2005-08-01

    Milling tests were run on families of High Speed Steel (HSS) end mills to determine their lives while machining 304 Stainless Steel. The end mills tested were made from M7, M42 and T15-CPM High Speed Steels. The end mills were also evaluated with no coatings as well as with Titanium Nitride (TiN) and Titanium Carbo-Nitride (TiCN) coatings to determine which combination of HSS and coating provided the highest increase in end mill life while increasing the cost of the tool the least. We found end mill made from M42 gave us the largest increase in tool life with the least increase in cost. The results of this study will be used by Cutting Tool Engineering in determining which end mill descriptions will be dropped from our tool catalog.

  14. ABOUT RATIONING MAXIMUM ALLOWABLE DEFECT DEPTH ON THE SURFACE OF STEEL BILLETS IN PRODUCTION OF HOT-ROLLED STEEL

    Directory of Open Access Journals (Sweden)

    PARUSOV E. V.

    2017-01-01

    Full Text Available Formulation of the problem. Significant influence on the quality of rolled steel have various defects on its surface, which in its turn inherited from surface defects of billet and possible damage to the surface of rolled steel in the rolling mill line. One of the criteria for assessing the quality indicators of rolled steel is rationing of surface defects [1; 2; 3; 6; 7]. Current status of the issue. Analyzing the different requirements of regulations to the surface quality of the rolled high-carbon steels, we can conclude that the maximum allowable depth of defects on the surface of billet should be in the range of 2.0...5.0 mm (depending on the section of the billet, method of its production and further the destination Purpose. Develop a methodology for calculating the maximum allowable depth of defects on the steel billet surface depending on the requirements placed on the surface quality of hot-rolled steel. Results. A simplified method of calculation, allowing at the rated depth of defects on the surface of the hot-rolled steel to make operatively calculation of the maximum allowable depth of surface defects of steel billets before heating the metal in the heat deformation was developed. The findings shows that the maximum allowable depth of surface defects is reduced with increasing diameter rolled steel, reducing the initial section steel billet and degrees of oxidation of the metal in the heating furnace.

  15. INFLUENCE OF MICRO-SEGREGATION IN PB-S-ALLOYED FREE MACHINING STEELS ON THE SURFACE QUALITY OF THE ROLLED WIRE-ROD

    OpenAIRE

    Leuschke, U.; Rajesh Puvvada, N.; Puvvada, Rajesh

    2008-01-01

    Free machining steel billets were manufactured at the continuous casting machine. The manufactured billets did not exhibit any kind of surface defects but surface cracks and slivers appeared when the billets were rolled into wires and rods at the wire-rod mill. The defects on rolled wire-rod have been detected by a hot eddy current system. Further investigations in these defects with the help of microprobe analysis system and scanning electron microscope equipped with image analysis system re...

  16. System for manufacturing wooden rotor blades for small wind mills

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, B

    1991-05-01

    Acknowledging the need (also in developing countries) for small windmill wings with various patterns and aerodynamic characteristics a simple, low-cost hand-controlled copying milling machine was built (with standard parts) to reduce production time for one wing to 1-2 hours. A sensor-roll transfers the airfoil pattern to a set of two saw blades, driven by an electric motor, which carves the airfoil out of a wooden beam. It is thus possible to cut out each cross section of the wing and manufacture a constantly reproducible rotor blade. The hard-foam airfoil models - their shapes, material and production, the laminated beam - the preparation of the wood and the lamination, and the copying milling machine itself - its design and how to build, operate and maintain it, are described in detail. (AB)

  17. Urban artisanal gold shops and mercury emissions

    International Nuclear Information System (INIS)

    Cordy, P.; Veiga, M.; Carrasco, V.H.G.

    2008-01-01

    Artisanal miners in developing countries use mercury amalgamation processes to extract gold. The amalgams are then refined before being sold on to urban gold shops. The amalgams can often contain between 2 to 40 per cent mercury. Unburned amalgams are also often sold directly to gold shops. There are serious health risks for shop employees and nearby populations when the gold is melted and further purified. Studies have shown that mercury concentrations in the ambient air of gold shops often exceeds World Health Organization (WHO) limits by an order of magnitude or more. This study examined the practices and technologies used to refine gold in Latin America and Indonesia. The study compared and contrasted various refining methods and their resulting mercury emissions. Methods of reducing mercury emissions were also investigated, including a filtration system designed to capture 80 per cent of mercury emissions. Barriers to implementing mercury emissions reduction plans were also investigated. It was concluded that the design of urban gold shops must include condensers, fume hoods, and efficient mercury capture systems. 15 refs

  18. Digitalization influence on shopping centers strategic management

    Directory of Open Access Journals (Sweden)

    Ioniţă Irene Mihaela

    2017-07-01

    Full Text Available Shopping centers are an important aspect of the extremely dynamic life of the 21st century consumer. Nowadays, worldwide, shopping centers represent significant multimillion euro investments, remarking themselves with bold architectures and structures and an individual brand image. Retail markets are currently under transformation by a confluence of new retailing technologies, dramatic shifts in the demographic profile and preferences of more affluent and educated shoppers. Part of the market share in modern retail moved to new forms of selling, which weakened the offer of some traditional retailers, while also creating opportunities for retailers to move and integrate their offerings with new digital tools (via electronic commerce, social commerce and mobile commerce. Meeting customer needs and increasing sales are the primary drivers behind retailers use of information systems and technology (IS/IT. New developments in IS/IT offer new opportunities and challenges for organizations and society. The current paper proposes to analyze the way digital media and information technology (computers and mobile devices influences the virtual and physical shopping experiences, and shopping centers management consequently. The need for communication & sales channels integration, the impact of new information technologies (IT’s, the growing role of social / digital media, the balance between personalization and privacy – all represent challenges retail industry needs to currently adapt to face digitalization. E-commerce is transforming both consumer behavior and retailing business models, by greatly expanding shopping convenience, selection and affordability.

  19. Hot rolling of thick uranium molybdenum alloys

    Science.gov (United States)

    DeMint, Amy L.; Gooch, Jack G.

    2015-11-17

    Disclosed herein are processes for hot rolling billets of uranium that have been alloyed with about ten weight percent molybdenum to produce cold-rollable sheets that are about one hundred mils thick. In certain embodiments, the billets have a thickness of about 7/8 inch or greater. Disclosed processes typically involve a rolling schedule that includes a light rolling pass and at least one medium rolling pass. Processes may also include reheating the rolling stock and using one or more heavy rolling passes, and may include an annealing step.

  20. Physical Analysis of Cross-Wedge Rolling Process of a Stepped Shaft

    Directory of Open Access Journals (Sweden)

    Łukasz Wójcik

    2017-12-01

    Full Text Available The paper presents experimental- model research results on the process of cross-wedge rolling of an axially-symmetrical element (stepped shaft. During research was used plastic mass on the basis of waxes in black and white colour. The aim of this experimental research was to determine the best option of forming in terms of values obtained and the course of forces. Physical examination was carried out using specialist machines, that is model and laboratory cross-wedge rolling mill. Experimental analysis was carried out using billets with the temperature of 15°C, whereas the actual process was carried out for billet from C45 carbon steel of temperature 1150°C. The study compared the dimensions of the components obtained during rolling tests and forming forces obtained in the result of physical modeling with forces obtained during real tests.

  1. Effect of heating and deformation conditions on the depth of surface defects in alloyed steel rolling

    International Nuclear Information System (INIS)

    Malygin, R.Z.; Karyakin, B.P.; Grosman, A.B.; Simovskikh, V.N.; Storozhev, V.I.

    1978-01-01

    The effect of heating and deformation conditions on the depth change of artificial defects in the 50 KhFA alloyed steel rolling on the 850 blooming and 450 section mill was studied. Quite a definite regularity in the arrangement of defects (cracks and hairlines) along the circumference of the round steel bar and obvious relation with the defect distribution on the bloom faces are established. Oxidation is shown to diminish defect depth while ingot and billet heating especially on the faces under direct firing. Blooms should be placed in the furnace with 90 deg canting in relation to the faces position while ingot heating. Round rolling must be performed with one or several 45 deg strip cantings. The defect depth for the ingots to be rolled without chipping is set up

  2. Development of Intermediate Cooling Technology and Its Control for Two-Stand Plate Rolling

    Directory of Open Access Journals (Sweden)

    Fei Zhang

    2016-01-01

    Full Text Available In a plate rolling production line, thermomechanically controlled processing is critical for plate quality. In this paper, a set of intermediate cooling equipment of a two-stand plate mill with super density nozzles, medium pressure, and small flow is developed. Based on a simplified dynamic model, a cooling control scheme with combined feedforward, feedback, and adaptive algorithms is put forward. The new controlled rolling process and the highly efficient control system improve the controlled rolling efficiency by an average of 17.66%. The proposed intermediate cooling system can also effectively inhibit the growth of austenite grain, improve the impact toughness and yield strength of Q345B steel plate, reduce the formation of secondary oxide scale on the plate surface and the chromatic aberration of the plate surface, and greatly improve the surface quality of the steel plate.

  3. Robust Rudder Roll Damping Control

    DEFF Research Database (Denmark)

    Yang, C.

    The results of a systematic research to solve a specific ship motion control problem, simultaneous roll damping and course keeping using the rudder are presented in this thesis. The fundamental knowledge a priori is that rudder roll damping is highly sensitive to the model uncertainty, therefore H-infinity...... theory is used to deal with the problem. The necessary mathematical tools and the H-Infinity theory as the basis of controller design are presented in Chapter 2 and 3. The mu synthesis and the D-K iteration are introduced in Chapter 3. The ship dynamics and modeling technology are discussed in Chapter 4...

  4. English Shop Signs and Brand Names

    Directory of Open Access Journals (Sweden)

    Parvaneh Khosravizadeh

    2016-07-01

    Full Text Available The present study tries to investigate the people’s attitude to the use of English words in TV commercials, brand-naming and shop signs in Iran and specifically in Tehran where due to the fact that it is the capital, more English might be used for the sake of foreigners. The widespread use of English shop signs and English brand names for recently produced goodsdrove the researchers to investigate peoples’ attitude as consumers from two aspects of age and education. To reach the research goal, a questionnaire was devised and distributed to 100 people at random selection probing their attitudes while considering two factors of age and education. The result of the research will mostly benefit sociolinguists and business marketers.Keywords: age, education, advertising, brand-naming, shop signs, globalization

  5. Attitudinal Explanation on Virtual Shopping Intention

    Directory of Open Access Journals (Sweden)

    Ritzky Karina M.R. Brahmana

    2014-08-01

    Full Text Available Abstract. Virtual stores provide great efficiency in the retail value chain, and their existence has tremendously paved the way for electronic commerce. Understanding the intention of consumers to shop online in attitudinal perspective will provide important contribution to the area of e-commerce. This research proposes Task Technology Fit, Perceived Ease of Use (PEoU, and Perceived Usefulness (PU as the factors that drive consumers’ intention. The results from our survey study of 310 online consumers in Indonesia indicate that TTF affects PEoU and PU significantly. Our hierarchical model also reports that PEoU is the mediating effect on the relationship between TTF and Intention. The resulting model explains a large portion of the factors that lead a user’s behavioural intention to use a virtual shop. Keywords : Attitudinal, Task Technology Fit, Perceived Ease of Use, Perceived Usefulness, Retail, Virtual Shopping Intention

  6. Women who doctor shop for prescription drugs.

    Science.gov (United States)

    Worley, Julie; Thomas, Sandra P

    2014-04-01

    Doctor shopping is a term used to describe a form of diversion of prescription drugs when patients visit numerous prescribers to obtain controlled drugs for illicit use. Gender differences exist in regard to prescription drug abuse and methods of diversion. The purpose of this phenomenological study guided by the existential philosophy of Merleau-Ponty was to understand the lived experience of female doctor shoppers. Interviews were conducted with 14 women, which were recorded, transcribed, and analyzed. Included in the findings are figural aspects of the participants' experience of doctor shopping related to the existential grounds of world, time, body, and others. Four themes emerged from the data: (a) feeding the addiction, (b) networking with addicts, (c) playing the system, and (d) baiting the doctors. The findings suggest several measures that nurses can take to reduce the incidence of doctor shopping and to provide better care for female doctor shoppers.

  7. The Virtual Shopping Experience: using virtual presence to motivate online shopping

    Directory of Open Access Journals (Sweden)

    Carolyn Chin

    2005-11-01

    Full Text Available Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is needed for a successful ‘shopping experience’ online and what the possible obstacles or pitfalls along the way might be. We initially introduce the concepts of virtual presence (the sense of ‘being there’ and virtual reality, discussing the possible roles both can play in providing a solution to the problem of effective online shopping. We then consider the Experience Economy, a concept which encapsulates many of the issues related to the problem of online shopping and which suggests ways in which online retailers can enhance the effectiveness of their sites by means of a virtual ‘experience’. Having set the scene for online shopping, we discuss eTailing today in terms of direct product experience and the opportunities which cyber-shopping offers to replicate this process. Finally, we identify some of the possibilities and problems of online shopping today, illustrating the current status of virtual presence in retailing with two micro-cases of success and failure.

  8. Doctor and pharmacy shopping for controlled substances.

    Science.gov (United States)

    Peirce, Gretchen L; Smith, Michael J; Abate, Marie A; Halverson, Joel

    2012-06-01

    Prescription drug abuse is a major health concern nationwide, with West Virginia having one of the highest prescription drug death rates in the United States. Studies are lacking that compare living subjects with persons who died from drug overdose for evidence of doctor and pharmacy shopping for controlled substances. The study objectives were to compare deceased and living subjects in West Virginia for evidence of prior doctor and pharmacy shopping for controlled substances and to identify factors associated with drug-related death. A secondary data study was conducted using controlled substance, Schedule II-IV, prescription data from the West Virginia Controlled Substance Monitoring Program and drug-related death data compiled by the Forensic Drug Database between July 2005 and December 2007. A case-control design compared deceased subjects 18 years and older whose death was drug related with living subjects for prior doctor and pharmacy shopping. Logistic regression identified factors related to the odds of drug-related death. A significantly greater proportion of deceased subjects were doctor shoppers (25.21% vs. 3.58%) and pharmacy shoppers (17.48% vs. 1.30%) than living subjects. Approximately 20.23% of doctor shoppers were also pharmacy shoppers, and 55.60% of pharmacy shoppers were doctor shoppers. Younger age, greater number of prescriptions dispensed, exposure to opioids and benzodiazepines, and doctor and pharmacy shopping were factors with greater odds of drug-related death. Doctor and pharmacy shopping involving controlled substances were identified, and shopping behavior was associated with drug-related death. Prescription monitoring programs may be useful in identifying potential shoppers at the point of care.

  9. Modeling of Surface Geometric Structure State After Integratedformed Milling and Finish Burnishing

    Science.gov (United States)

    Berczyński, Stefan; Grochała, Daniel; Grządziel, Zenon

    2017-06-01

    The article deals with computer-based modeling of burnishing a surface previously milled with a spherical cutter. This method of milling leaves traces, mainly asperities caused by the cutting crossfeed and cutter diameter. The burnishing process - surface plastic treatment - is accompanied by phenomena that take place right in the burnishing ball-milled surface contact zone. The authors present the method for preparing a finite element model and the methodology of tests for the assessment of height parameters of a surface geometrical structure (SGS). In the physical model the workpieces had a cuboidal shape and these dimensions: (width × height × length) 2×1×4.5 mm. As in the process of burnishing a cuboidal workpiece is affected by plastic deformations, the nonlinearities of the milled item were taken into account. The physical model of the process assumed that the burnishing ball would be rolled perpendicularly to milling cutter linear traces. The model tests included the application of three different burnishing forces: 250 N, 500 N and 1000 N. The process modeling featured the contact and pressing of a ball into the workpiece surface till the desired force was attained, then the burnishing ball was rolled along the surface section of 2 mm, and the burnishing force was gradually reduced till the ball left the contact zone. While rolling, the burnishing ball turned by a 23° angle. The cumulative diagrams depict plastic deformations of the modeled surfaces after milling and burnishing with defined force values. The roughness of idealized milled surface was calculated for the physical model under consideration, i.e. in an elementary section between profile peaks spaced at intervals of crossfeed passes, where the milling feed fwm = 0.5 mm. Also, asperities after burnishing were calculated for the same section. The differences of the obtained values fall below 20% of mean values recorded during empirical experiments. The adopted simplification in after-milling

  10. Shopping intention prediction using decision trees

    OpenAIRE

    Šebalj, Dario; Franjković, Jelena; Hodak, Kristina

    2017-01-01

    Introduction: The price is considered to be neglected marketing mix element due to the complexity of price management and sensitivity of customers on price changes. It pulls the fastest customer reactions to that change. Accordingly, the process of making shopping decisions can be very challenging for customer.Objective: The aim of this paper is to create a model that is able to predict shopping intention and classify respondents into one of the two categories, depending on whether they inten...

  11. Store Location in Shopping Centers: Theory & Estimates

    OpenAIRE

    Kerry D. Vandell; Charles C. Carter

    2000-01-01

    This paper develops a formal theory of store location within shopping centers based on bid rent theory. The bid rent model is fully speci?ed and solved with the objective function of pro?t maximization in the presence of comparative, multipurpose and impulse shopping behavior. Several hypotheses result about the optimal relationships between store types, sizes, rents, sales, and distances from the mall center. The hypotheses are tested and con?rmed using data from a sample of 689 leases in ei...

  12. THE METHODS OF CALCULATIONS OF THE TEMPERATURE BREAKDOWN FIELD IN THE LINE OF THE MODEM HIGH-SPEED WIRE MILL

    Directory of Open Access Journals (Sweden)

    S. M. Zhuchkov

    2007-01-01

    Full Text Available The calculation methods of the temperature field of the breakdown, being rolled in lines of the modern high-speed wire mill, is developed on the basis of solving of problem of the contact exchange of hot metal with cold rollers.

  13. The impact of science shops on university research and education

    DEFF Research Database (Denmark)

    Hende, Merete; Jørgensen, Michael Søgaard

    This report discusses the impact from university-based science shops on curricula and research. Experience from science shops show that besides assisting citizen groups, science shops can also contribute to the development of university curricula and research. This impact has been investigated...... through the SCIPAS questionnaire sent out to science shops and through follow-up interviews with employees from nine different university-based science shops and one university researcher. Not all the cases call themselves science shops, but in the report the term 'science shop' will be used most...... way or the other has had impact on university curricula and/or research. The analysis and the case studies have theoretically been based on literature on universities and education and research as institutions and a few articles about the impact of science shops on education and research. The analysis...

  14. Informal sector shops and AIDS prevention An exploratory social ...

    African Journals Online (AJOL)

    Informal sector shops and AIDS prevention An exploratory social marketing ... The existence of a variety of media and interpersonal information sources on the ... shops should be further investigated as avenues for AIDS prevention efforts.

  15. Rolling motion in moving droplets

    Indian Academy of Sciences (India)

    motions. The two limits of a thin sheet-like drop in sliding motion on a surface, and a spherical drop in roll, have been extensively .... rigid body rotation. The solid body rotation makes sense in the context of small Reynolds. (Re) number flows ...

  16. Impact Analysis of Roller System Stability for Four-High Mill Horizontal Vibration

    Directory of Open Access Journals (Sweden)

    Xiao-bin Fan

    2016-01-01

    Full Text Available In order to study the hot Compact Strip Production (CSP, four-high mill vibration characteristics, and vibration suppression method, the roller system structure stability was analyzed and calculated at first in the paper. And then, the mill stand gap was measured at field and its influence on roll transverse vibration was analyzed. The drum gear coupling effect on the roller system stability and the automatic balance conditions of the coupling transmission torque were studied; the influence of axial force caused by the roller cross on the system stability was analyzed. Finally, the roller transverse friction chatter vibration mechanics model was established; the simulation analysis was carried out with eliminating mill house-bearing clearance and adding floating support for coupling, respectively. And the characteristics of the roller “jump vibration” were studied. We applied copper gaskets to eliminate or reduce mill house-bearing clearance for suppressing the rolling mill vibration on the spot; the test results show that the roller transverse vibration was suppressed after eliminating clearance.

  17. Robust Tension Control of Strip for 5-Stand Tandem Cold Mills

    Directory of Open Access Journals (Sweden)

    Behrooz Shafiei

    2014-01-01

    Full Text Available Tandem cold rolling process is a nonlinear complex system with external and internal uncertainties and significant disturbances. The improvement in the quality of the final output depends on the control strategy of centerline thickness and interstand tension. This paper focuses on interstand tension control problem in 5-stand tandem cold rolling mills. Tension dynamics can be described by a nominal model perturbed by parametric uncertainties. In order to overcome the model uncertainties and external disturbances, suboptimal H∞ and μ controllers are proposed and the Hankel-norm approximation is used to reduce the order of μ controller. The performance of the proposed controllers is demonstrated by some simulations.

  18. 7 CFR 868.310 - Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice...

    Science.gov (United States)

    2010-01-01

    ... Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice. (See also Â... Milled Rice Principles Governing Application of Standards § 868.310 Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice...

  19. Marketing activities of vape shops across racial/ethnic communities

    OpenAIRE

    Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B.; Sussman, Steve

    2017-01-01

    INTRODUCTION There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community’s demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by...

  20. Growing Shopping Malls and Behavior of Urban Shoppers

    OpenAIRE

    Rajagopal

    2009-01-01

    Shopping malls contribute to business more significantly than traditional markets which were viewed as simple convergence of supply and demand. Shopping malls attract buyers and sellers, and induce customers providing enough time to make choices as well as a recreational means of shopping. However, competition between malls, congestion of markets and traditional shopping centers has led mall developers and management to consider alternative methods to build excitement with customers. This stu...

  1. Consumer Buying Behavior Towards Online Shopping Stores in Malaysia

    OpenAIRE

    Mehrdad Salehi

    2011-01-01

    The Internet as a global medium is quickly gaining interest and attractiveness as the most revolutionary marketing tool. The global nature of communication and shopping has as well redefined, seeing that it is the perfect vehicle for online shopping stores. Online convenient shop is mostly reflected in shorter time and less energy spent, including shipping cost reduction, less crowd and queues than real markets, unlimited time and space, which all increase convenience of shopping. Internet sh...

  2. End-user Acceptance of Online Shopping Sites in India

    OpenAIRE

    Bolar K; Shaw B

    2015-01-01

    Online shopping sites have recently gained momentum in India. Since the ecommerce industry is in infancy state, customer (end user) satisfaction with the online shopping is the prime concern because decreasing customer satisfaction leads to negative electronic word of mouth (eWOM) which is very severe for the business. Through a dataset gathered from 127 online shopping customers in with respect to online shopping sites in India, this study investigates the role of website quality, informatio...

  3. What do we know about consumer m-shopping behaviour?

    OpenAIRE

    Marriott, Hannah; Williams, Michael; Dwivedi, Yogesh

    2017-01-01

    Purpose – This paper provides a review of mobile shopping (m-shopping) acceptance literature to bring international marketing and consumer research attention to m-shopping acceptance factors and limitations in current understandings to propose recommendations for further academic and retailing attention.\\ud Design/methodology – Keyword searches identified consumer-focused literature across mobile commerce, mobile shopping, mobile browsing, and mobile purchasing, published in English language ...

  4. Uranium-mill appraisal program

    International Nuclear Information System (INIS)

    Everett, R.J.; Cain, C.L.

    1982-08-01

    The results of special team appraisals at NRC-licensed uranium mills in the period May to November 1981 are reported. Since the Three Mile Island accident, NRC management has instituted a program of special team appraisals of radiation protection programs at certain NRC-licensed facilities. These appraisals were designed to identify weaknesses and strengths in NRC-licensed programs, including those areas not covered by explicit regulatory requirements. The regulatory requirements related to occupational radiation protection and environmental monitoring at uranium mills have been extensively upgraded in the past few years. In addition, there was some NRC staff concern with respect to the effectiveness of NRC licensing and inspection programs. In response to this concern and to changes in mill requirements, the NRC staff recommended that team appraisals be conducted at mills to determine the adequacy of mill programs, the effectiveness of the new requirements, and mill management implementation of programs and requirements. This report describes the appraisal scope and methodology as well as summary findings and conclusions. Significant weaknesses identified during the mill appraisals are discussed as well as recommendations for improvements in uranium mill programs and mill licensing and inspection

  5. Maintenance Appointments in Railway Rolling Stock Rescheduling

    NARCIS (Netherlands)

    J.C. Wagenaar (Joris); L.G. Kroon (Leo); M.E. Schmidt (Marie)

    2016-01-01

    textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of the disrupted passenger trains has to be rescheduled in order to restore a feasible rolling stock circulation. Usually, a

  6. Rolling block mazes are PSPACE-complete

    NARCIS (Netherlands)

    Buchin, K.; Buchin, M.

    2012-01-01

    In a rolling block maze, one or more blocks lie on a rectangular board with square cells. In most mazes, the blocks have size k × m × n where k, m, n are integers that determine the size of the block in terms of units of the size of the board cells. The task of a rolling block maze is to roll a

  7. Efficient Circulation of Railway Rolling Stock

    NARCIS (Netherlands)

    Alfieri, A.; Groot, R.; Kroon, L.G.; Schrijver, A.

    2006-01-01

    Railway rolling stock (locomotives, carriages, and train units) is one of the most significant cost sources for operatorsof passenger trains, both public and private. Rolling stock costsare due to material acquisition, power supply, and material maintenance. The efficient circulation of rolling

  8. An architecture for agile shop floor control systems

    DEFF Research Database (Denmark)

    Langer, Gilad; Alting, Leo

    2000-01-01

    as shop floor control. This paper presents the Holonic Multi-cell Control System (HoMuCS) architecture that allows for design and development of holonic shop floor control systems. The HoMuCS is a shop floor control system which is sometimes referred to as a manufacturing execution system...

  9. A multipurpose shopping trip model to assess retail agglomeration effects

    NARCIS (Netherlands)

    Arentze, T.A.; Oppewal, H.; Timmermans, H.J.P.

    2005-01-01

    Multipurpose shopping is a prominent and relevant feature of shopping behavior. However, no methodology is available to assess empirically how the demand for multipurpose shopping depends on retail agglomeration or, in general, the characteristics of retail supply, such as the numbers and types of

  10. Approximation algorithms for the parallel flow shop problem

    NARCIS (Netherlands)

    X. Zhang (Xiandong); S.L. van de Velde (Steef)

    2012-01-01

    textabstractWe consider the NP-hard problem of scheduling n jobs in m two-stage parallel flow shops so as to minimize the makespan. This problem decomposes into two subproblems: assigning the jobs to parallel flow shops; and scheduling the jobs assigned to the same flow shop by use of Johnson's

  11. Minimizing total weighted completion time in a proportionate flow shop

    NARCIS (Netherlands)

    Shakhlevich, N.V.; Hoogeveen, J.A.; Pinedo, M.L.

    1998-01-01

    We study the special case of the m machine flow shop problem in which the processing time of each operation of job j is equal to pj; this variant of the flow shop problem is known as the proportionate flow shop problem. We show that for any number of machines and for any regular performance

  12. Effects of time of day on shopping behavior.

    Science.gov (United States)

    Chebat, J C

    1999-04-01

    Shoppers interviewed in a shopping mall at different times of the day show different activities within the mall and attitudes toward the products. Prices also vary with the time of the day. These results can be explained in terms of shopping values and the related demographic characteristics of the population visiting the shopping center at different times of the day.

  13. Turning shopping habits of young consumers into green

    NARCIS (Netherlands)

    Bialkova, Svetlana; van 't Erve, Sanne; van Hoof, Joris Jasper; Pruyn, Adriaan T.H.; Bigné, Enrique

    2014-01-01

    Consumers have strong shopping habits, and although being aware of sustainable issues, they hardly do green shopping. Therefore, a challenging question is: how to break the old shopping habits and turn those into green? The current study addresses this question looking at barriers and potential

  14. Tourist shopping behavior in a historic downtown area

    NARCIS (Netherlands)

    Kemperman, A.D.A.M.; Borgers, A.W.J.; Timmermans, H.J.P.

    2009-01-01

    Shopping is one of the most important activities for tourists. The purpose of this study is to describe and predict tourist shopping route choice behavior in a downtown historic center. Reported routes of tourists in the downtown shopping area of Maastricht, located in the Southern part of the

  15. What drives people? Analyzing leisure-shopping trip decision making

    NARCIS (Netherlands)

    de Ceunynck, T.; Kusumastuti, Diana; Hannes, E.; Janssens, D.; Wets, G.

    2011-01-01

    Because of the strong increase in the number of leisure-shopping trips, a shift towards more sustainable leisure-shopping behaviour is desirable. This can be attained by having a better insight into people’s reasoning in choosing a transport mode and shopping location for this type of activities.

  16. Internet Shopping Behavior of College of Education Students

    Science.gov (United States)

    Kiyici, Mubin

    2012-01-01

    Internet is an important facilitator for human and humans use this medium almost every phase. As a shopping medium, internet attract human so attract researcher. Younger people can adapt newer technologies so they can adapt internet as shopping tool. In this research it is tried to define college of education students' online shopping behavior and…

  17. Online versus conventional shopping: Consumers' risk perception and regulatory focus

    NARCIS (Netherlands)

    van Noort, G.; Kerkhof, P.; Fennis, B.M.

    2007-01-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a

  18. Online versus Conventional Shopping: Consumers' Risk Perception and Regulatory Focus

    NARCIS (Netherlands)

    van Noort, Guda; Kerkhof, Peter; Fennis, B.M.

    2007-01-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a

  19. Uranium mill tailings management

    International Nuclear Information System (INIS)

    1982-01-01

    Facilities for the disposal of uranium mill tailings will invariably be subjected to geomorphological and climatological influences in the long-term. Proceedings of a workshop discuss how the principles of geomorphology can be applied to the siting, design, construction, decommissioning and rehabilitation of disposal facilities in order to provide for long-term containment and stability of tailings. The characteristics of tailings and their behaviour after disposal influence the potential impacts which might occur in the long-term. Proceedings of another workshop examine the technologies for uranium ore processing and tailings conditioning with a view to identifying improvements that could be made in such characteristics

  20. Discrete element method based scale-up model for material synthesis using ball milling

    Science.gov (United States)

    Santhanam, Priya Radhi

    Mechanical milling is a widely used technique for powder processing in various areas. In this work, a scale-up model for describing this ball milling process is developed. The thesis is a combination of experimental and modeling efforts. Initially, Discrete Element Model (DEM) is used to describe energy transfer from milling tools to the milled powder for shaker, planetary, and attritor mills. The rolling and static friction coefficients are determined experimentally. Computations predict a quasisteady rate of energy dissipation, E d, for each experimental configuration. It is proposed that the milling dose defined as a product of Ed and milling time, t, divided by the mass of milled powder, mp characterizes the milling progress independently of the milling device or milling conditions used. Once the milling dose is determined for one experimental configuration, it can be used to predict the milling time required to prepare the same material in any milling configuration, for which Ed is calculated. The concept is validated experimentally for DEM describing planetary and shaker mills. For attritor, the predicted Ed includes substantial contribution from milling tool interaction events with abnormally high forces (>103 N). The energy in such events is likely dissipated to heat or plastically deform milling tools rather than refine material. Indeed, DEM predictions for the attritor correlate with experiments when such events are ignored in the analysis. With an objective of obtaining real-time indicators of milling progress, power, torque, and rotation speed of the impeller of an attritor mill are measured during preparation of metal matrix composite powders in the subsequent portion of this thesis. Two material systems are selected and comparisons made between in-situ parameters and experimental milling progress indicators. It is established that real-time measurements can certainly be used to describe milling progress. However, they need to be interpreted carefully

  1. Retail environments and spatial shopping behavior

    NARCIS (Netherlands)

    Timmermans, H.J.P.; Gaerling, T.; Golledge, R.G.

    1993-01-01

    The interplay between aspects of retail environments and consumer spatial shopping behavior has traditionally been an area of major concern in geography, urban planning and related disciplines. It reflects an interest in explaining the relationship between locational and nonlocational attributes of

  2. Architectural Considerations for Holonic Shop Floor Control

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1997-01-01

    of the HMS concept, followed by an investigation regard-ing the development of shop floor control architectures. This will include a summary of the ongoing research on HMS, and current results regarding the development of a holonic SFC architecture in a cellular manufacturing perspective. The paper...

  3. 77 FR 56552 - Holiday Mobile Shopping Promotion

    Science.gov (United States)

    2012-09-13

    ... POSTAL SERVICE 39 CFR Part 111 Holiday Mobile Shopping Promotion AGENCY: Postal Service \\TM... Postal Service, Domestic Mail Manual (DMM[supreg]) 709.3 to add a new temporary promotion during November... Promotion (``Promotion''), which will take place between November 7, 2012 and November 21, 2012 (``promotion...

  4. CONSUMIDOR ADOLESCENTE EM AMBIENTE DE SHOPPING CENTER

    Directory of Open Access Journals (Sweden)

    Lunie Imamura Lima

    2009-07-01

    shopping center da cidade de Fortaleza (CE e objetivou conhecer as características bio-demográficas, os hábitos de utilização do shopping e os principais elementos influenciadores do processo de decisão de compra deste segmento. De natureza descritiva, quantitativa, com corte transversal; a pesquisa utilizou um questionário estruturado aplicado a uma amostra não-probabilística por conveniência, com maioria do sexo masculino, faixa etária entre 13 e 15 anos, provenientes de famílias de classe alta e renda familiar mensal superior a R$ 2700,00. Os resultados demonstraram que a maioria dos respondentes recebe mesada no valor menor que R$ 80,00; vai ao shopping de carro com pais ou parentes; gasta de R$ 10,00 a R$ 30,00; freqüenta o local 3 vezes na semana; permanece de 4 a 6 horas e é acompanhado pelos amigos. Ainda mostrou que pais ou familiares são os principais elementos influenciadores do processo de decisão de compra, enquanto os amigos os principais meios de informações sobre novos produtos. O estudo pretende contribuir com a literatura científica nas áreas de Marketing e Comportamento do consumidor e servir de instrumento gerencial aos dirigentes de shopping centers.

  5. 30 CFR 57.4761 - Underground shops.

    Science.gov (United States)

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and... toxic gases from a fire originating in an underground shop where maintenance work is routinely done on...

  6. Job shop scheduling by simulated annealing

    NARCIS (Netherlands)

    Laarhoven, van P.J.M.; Aarts, E.H.L.; Lenstra, J.K.

    1992-01-01

    We describe an approximation algorithm for the problem of finding the minimum makespan in a job shop. The algorithm is based on simulated annealing, a generalization of the well known iterative improvement approach to combinatorial optimization problems. The generalization involves the acceptance of

  7. Informal sector shops and AIDS prevention

    African Journals Online (AJOL)

    1991-04-20

    Apr 20, 1991 ... marketing goals go beyond information transfer and focus on behaviour .... thought their shop could do to help to inform the people in their area about AIDS. ..... history of residents of the shack area of Khayelitsha. Occasional ...

  8. Job shop scheduling by local search

    NARCIS (Netherlands)

    Vaessens, R.J.M.; Aarts, E.H.L.; Lenstra, J.K.

    1994-01-01

    We survey solution methods for the job shop scheduling problem with an emphasis on local search. We discuss both cleterministic and randomized local search methods as well as the applied neighborhoods. We compare the computational performance of the various methods in terms of their effectiveness

  9. The Great Irish Head Shop Controversy

    Science.gov (United States)

    Ryall, Graham; Butler, Shane

    2011-01-01

    This research describes and analyses recent policy developments in Ireland in relation to the practice of selling psychoactive substances which, while not themselves illegal, mimic the effects of commonly used illegal drugs. These so-called "legal highs" had been sold in Ireland through an increasing number of "head shops"…

  10. Shopping for Courses on the Mall.

    Science.gov (United States)

    Gallagher, John C.

    1980-01-01

    Describes an extension program conducted by Suffolk County Community College, New York, at an area shopping mall. Discusses program offerings, including a series of general interest lectures, regular credit courses, and a set of noncredit minicourses for mall employees. Examines the public relations value of the extension efforts. (JP)

  11. Indices of pedestrian behavior in shopping areas

    NARCIS (Netherlands)

    Borgers, A.; Timmermans, H.

    2014-01-01

    A number of indices to describe and compare sets of pedestrian routes in shopping environments will be introduced. The first set of indices is related to characteristics of the trajectories and the second set to visiting outlets. These statistics can be used to assess the performance of models

  12. Secret Shopping as User Experience Assessment Tool

    Science.gov (United States)

    Boyce, Crystal M.

    2015-01-01

    Secret shopping is a form of unobtrusive evaluation that can be accomplished with minimal effort, but still produce rich results. With as few as 11 shoppers, the author was able to identify trends in user satisfaction with services provided across two entry-level desks at Illinois Wesleyan University's The Ames Library. The focus of this secret…

  13. Designing a Shopping System for Senior Citizens

    Science.gov (United States)

    Roman, Harry T.

    2010-01-01

    It is all about serving the customer. That is how capitalism plays out. It finds a market need and then creates a product or service to address that need. The Baby Boomer generation, all 76 million, will be retiring soon. Eventually, some may find it very hard to move about and do their routine food shopping. In this article, the author's…

  14. Towards roll-to-roll manufacturing of polymer photonic devices

    Science.gov (United States)

    Subbaraman, Harish; Lin, Xiaohui; Ling, Tao; Guo, L. Jay; Chen, Ray T.

    2014-03-01

    Traditionally, polymer photonic devices are fabricated using clean-room processes such as photolithography, e-beam lithography, reactive ion etching (RIE) and lift-off methods etc, which leads to long fabrication time, low throughput and high cost. We have utilized a novel process for fabricating polymer photonic devices using a combination of imprinting and ink jet printing methods, which provides high throughput on a variety of rigid and flexible substrates with low cost. We discuss the manufacturing challenges that need to be overcome in order to realize true implementation of roll-to-roll manufacturing of flexible polymer photonic systems. Several metrology and instrumentation challenges involved such as availability of particulate-free high quality substrate, development and implementation of high-speed in-line and off-line inspection and diagnostic tools with adaptive control for patterned and unpatterned material films, development of reliable hardware, etc need to be addressed and overcome in order to realize a successful manufacturing process. Due to extreme resolution requirements compared to print media, the burden of software and hardware tools on the throughput also needs to be carefully determined. Moreover, the effect of web wander and variations in web speed need to accurately be determined in the design of the system hardware and software. In this paper, we show the realization of solutions for few challenges, and utilizing these solutions for developing a high-rate R2R dual stage ink-jet printer that can provide alignment accuracy of web speed of 5m/min. The development of a roll-to-roll manufacturing system for polymer photonic systems opens limitless possibilities for the deployment of high performance components in a variety of applications including communication, sensing, medicine, agriculture, energy, lighting etc.

  15. Design of a Small Scale Roll to Roll Device

    OpenAIRE

    Pereira, Amon A; White, Edward; Kramer, Rebecca Krone

    2014-01-01

    In the soft robotics field, hyperelastic polymer films are used in conjunction with eutectic gallium indium to create flexible strain gages. However, rapid large scale manufacturing methods of such sensors have yet to be developed. Developing new manufacturing methods will allow for researchers to build and test new soft sensor concepts faster but also pave the way for future mass-production of these sensors for consumer or industrial consumption. One of those methods would be a Roll to...

  16. Perovskite solar cells for roll-to-roll fabrication

    Directory of Open Access Journals (Sweden)

    Uddin Ashraf

    2017-01-01

    Full Text Available Perovskite solar cell (PSCs is considered as the game changer in emerging photovoltaics technology. The highest certified efficiency is 22% with high temperature processed (∼500 °C TiO2 based electron transport layer (ETL. High temperature process is a rudimentary hindrance towards roll-to-roll processing of PSCs on flexible substrates. Low temperature solution process (<150 °C ZnO based ETL is one of the most promising candidate for large scale roll-to-roll fabrication of cells as it has nearly identical electron affinity (4.2 eV of TiO2. The mixed organic perovskite (MA0.6FA0.4PbI3 devices with Al doped ZnO (AZO ETL demonstrate average cell efficiency over 16%, which is the highest ever reported efficiency for this device configuration. The energy level alignment and related interfacial charge transport dynamics at the interface of ZnO and perovskite films and the adjacent charge transport layers are investigated. Significantly improved device stability, hysteresis free device photocurrent have been observed in MA0.6FA0.4PbI3 cells. A systematic electrochemical impedance spectroscopy, frequency dependent capacitance spectra, surface morphology and topography characterization have been conducted to understand the role of interfacial electronic properties between perovskite and neighbouring layers in perovskite device. A standardized degradation study, interfacial electronic property and capacitive spectra analysis of aged device, have been measured to understand the enhanced device stability in mixed MA0.6FA0.4PbI3 cells. Slow perovskite material decomposition rate and augmented device lifetime with AZO based devices have been found to be correlated with the more hydrophobic and acidic nature of AZO surface compared to pristine ZnO film.

  17. Commuter Shopping : A study in understanding commuting in the context of shopping

    OpenAIRE

    Andersson, Åsa; Skoog, Sara; Svensson, Johanna

    2014-01-01

    Background For ages people have commuted to work, or to other activities, located outside their home municipality. Statements found indicate that the basic decision for commuting are based on utility maximisation and no matter what the character of the benefit is; it should be higher than what can be found closer to the home location. This thesis aims to investigate if people are also commuting with the purpose of obtaining benefits from shopping. The shopping location will in this thesis be ...

  18. Why Shops Close Again : An Evolutionary Perspective on the Deregulation of Shopping Hours

    OpenAIRE

    Kosfeld, M.

    1999-01-01

    This paper introduces a new perspective on the deregulation of shopping hours based on ideas from evolutionary game theory. We study a retail economy where shopping hours have been deregulated recently. It is argued that first, the deregulation leads to a coordination problem between store owners and customers, and second, the ‘solution’ to this problem depends on the specific cost structure of stores and the preferences of customers. In particular, it may happen that, even if extended shoppi...

  19. On the constant-roll inflation

    Science.gov (United States)

    Yi, Zhu; Gong, Yungui

    2018-03-01

    The primordial power spectra of scalar and tensor perturbations during slow-roll inflation are usually calculated with the method of Bessel function approximation. For constant-roll or ultra slow-roll inflation, the method of Bessel function approximation may be invalid. We compare the numerical results with the analytical results derived from the Bessel function approximation, and we find that they differ significantly on super-horizon scales if the constant slow-roll parameter ηH is not small. More accurate method is needed for calculating the primordial power spectrum for constant-roll inflation.

  20. Possible Opioid Shopping and its Correlates.

    Science.gov (United States)

    Walker, Alexander M; Weatherby, Lisa B; Cepeda, M Soledad; Bradford, Daniel; Yuan, Yingli

    2017-11-01

    We created an operational definition of possible opioid shopping in US commercial health insurance data and examined its correlates. The population consisted of 264,204 treatment courses in persons with a fill for an opioid or diuretic prescription in 2012 and a second within 18 months. We examined counts of prescribers and pharmacies and the numbers of fills and overlaps for ability to discriminate courses of opioids from diuretics, which were a negative control. The most discriminatory measure, indicating possible shopping behavior, was cross-tabulated against other prescriptions filled and diagnoses as found in insurance claims. The associations between claims characteristics and shopping behavior were assessed in a logistic regression. A definition that classified possible "moderate" or "extensive" shopping when a person obtained drug through at least 3 practices and at least 3 pharmacies over 18 months was highly discriminatory between opioid and diuretic treatment. Overlaps between fills and number of fills did not improve the discrimination. Data from insurance claims strongly predicted moderate-to-extensive levels of possible shopping (c=0.82). Prominent among 20 significant predictors were: state of residence; amount of opioid dispensed; self-payment; use of nonspecialist prescribers; high use of anxiolytics, hypnotics, psychostimulants, and antipsychotics; and use of both immediate release and extended-release or long-acting opioids. The use of ≥3 prescribing practices and ≥3 dispensing pharmacies over 18 months sharply discriminated courses of opioid treatment from courses of diuretics. This pattern of fills was additionally associated with the numbers of nonspecialist and self-paid fills, the total morphine milligram equivalents dispensed, and heavier use of drugs for anxiety, sleep, attention, and psychosis.

  1. Application of powder metallurgy and hot rolling processes for manufacturing aluminum/alumina composite strips

    Energy Technology Data Exchange (ETDEWEB)

    Zabihi, Majed, E-mail: m.zabihi@ma.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Toroghinejad, Mohammad Reza, E-mail: toroghi@cc.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Shafyei, Ali, E-mail: shafyei@cc.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)

    2013-01-10

    In this study, aluminum matrix composites (AMC) with 2, 4, 6 and 10 wt% alumina were produced using powder metallurgy (PM), mechanical milling (MM) and vacuum hot pressing (VHP) techniques; then, this was followed by the hot-rolling process. During hot rolling, AMCs with 6 and 10 wt% Al{sub 2}O{sub 3} were fractured whereas strip composites with 2 and 4 wt% Al{sub 2}O{sub 3} were produced successfully. Microstructure and mechanical properties of the samples were investigated by optical and scanning electron microscopes and tensile and hardness tests, respectively. Microscopic evaluations of the hot-rolled composites showed a uniform distribution of alumina particles in the aluminum matrix. It was found that with increasing alumina content in the matrix, tensile strength (TS) and hardness increased and the percentage of elongation also decreased. Scanning electron microscope (SEM) was used to investigate aluminum/alumina interfaces and fracture surfaces of the hot rolled specimens after tensile test. SEM observations demonstrated that the failure mode in the hot-rolled Al-2 wt% Al{sub 2}O{sub 3} composite strips is a typical ductile fracture, while the failure mode was shear ductile fracture with more flat surfaces in Al-4 wt% Al{sub 2}O{sub 3} strips.

  2. Japan steel mill perspective

    Energy Technology Data Exchange (ETDEWEB)

    Murase, K. [Kobe Steel Ltd., Tokyo (Japan)

    2004-07-01

    The international and Japan's steel industry, the coking coal market, and Japan's expectations from Canada's coal industry are discussed. Japan's steel mills are operating at full capacity. Crude steel production for the first half of 2004 was 55.8 million tons. The steel mills are profitable, but costs are high, and there are difficulties with procuring raw materials. Japan is trying to enhance the quality of coke, in order to achieve higher productivity in the production of pig iron. Economic growth is rising disproportionately in the BRICs (Brazil, Russia, India, and China), with a large increase in coking coal demand from China. On the supply side, there are several projects underway in Australia and Canada to increase production. These include new developments by Elk Valley Coal Corporation, Grande Cache Coal, Western Canadian Coal, and Northern Energy and Mining in Canada. The Elga Mine in the far eastern part of Russia is under development. But the market is expected to remain tight for some time. Japan envisions Canadian coal producers will provide a stable coal supply, expansion of production and infrastructure capabilities, and stabilization of price. 16 slides/overheads are included.

  3. Shop stewards' learning and union strategies

    DEFF Research Database (Denmark)

    Warring, Niels

    2007-01-01

    In Denmark the trade unions have well established educational systems providing the shop stewards with a variety of competencies. Union courses have been analysed focusing on shop stewards' satisfaction with the content and the practical impact of the courses. However, little attention has been...... different theoretical traditions: Shop steward's learning is situational, relational and cross-contextual. Shop stewards' learning is lifelong and life wide. And shop stewards' learning is closely connected to the development of the labour market and not least the unions' priorities, interpretation...

  4. Online versus conventional shopping: consumers' risk perception and regulatory focus.

    Science.gov (United States)

    van Noort, Guda; Kerkhof, Peter; Fennis, Bob M

    2007-10-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a prevention focus. The findings in Study 1 demonstrate these effects by using self-report measures for risk perception and prevention focus. In Study 2, we replicated these findings and demonstrated that the effect of an online shopping environment carries over to behavior in a domain unrelated to shopping.

  5. Improved Dutch Roll Approximation for Hypersonic Vehicle

    Directory of Open Access Journals (Sweden)

    Liang-Liang Yin

    2014-06-01

    Full Text Available An improved dutch roll approximation for hypersonic vehicle is presented. From the new approximations, the dutch roll frequency is shown to be a function of the stability axis yaw stability and the dutch roll damping is mainly effected by the roll damping ratio. In additional, an important parameter called roll-to-yaw ratio is obtained to describe the dutch roll mode. Solution shows that large-roll-to-yaw ratio is the generate character of hypersonic vehicle, which results the large error for the practical approximation. Predictions from the literal approximations derived in this paper are compared with actual numerical values for s example hypersonic vehicle, results show the approximations work well and the error is below 10 %.

  6. Bioassay for uranium mill tailings

    International Nuclear Information System (INIS)

    Tschaeche, A.N.

    1986-01-01

    Uranium mill tailings are composed of fine sand that contains, among other things, some uranium (U/sup 238/ primarily), and all of the uranium daughters starting with /sup 230/Th that are left behind after the usable uranium is removed in the milling process. Millions of pounds of tailings are and continue to be generated at uranium mills around the United States. Discrete uranium mill tailings piles exist near the mills. In addition, the tailings materials were used in communities situated near mill sites for such purposes as building materials, foundations for buildings, pipe runs, sand boxes, gardens, etc. The Uranium Mill Tailings Remedial Action Project (UMTRAP) is a U.S. Department of Energy Program designed with the intention of removing or stabilizing the mill tailings piles and the tailings used to communities so that individuals are not exposed above the EPA limits established for such tailings materials. This paper discusses the bioassay programs that are established for workers who remove tailings from the communities in which they are placed

  7. Indian Americans at Mille Lacs.

    Science.gov (United States)

    Holbert, Victoria L.; And Others

    The Training Center for Community Programs prepared a report on the Mille Lacs (Chippewa) Reservation in Minnesota. Data for the report were from 2 separate sources: a survey conducted by the Training Center with the assistance of the Mille Lacs community action program (1967) and an attitudinal survey conducted by Victoria Holbert during 1969.…

  8. Breaking Out of the Local: International dimensions of science shops

    Directory of Open Access Journals (Sweden)

    Caspar DeBok

    2008-09-01

    Full Text Available In this article we want to give an overview of the international dimension and the interest of the European Union (EU in the concept of Science Shops. The European Commission (EC manages the day-to-day business by initiating and implementing EU policies and spending EU funds. The EC support for Science Shops has been an important factor for the international interest and progress of the Science Shop movement. This article will not give detailed information about daily routines of a Science Shop. Detailed information about the Science Shop concept can be found at the Living Knowledge website (www.livingknowledge.org. Living Knowledge represents the international Science Shop Network. In this article international developments of the Science Shop Network, like the project TRAMS, and Science Shop backgrounds will be linked with past and new EU policies like the EU 7th Framework Programme for Research. It shows how community-based research does not only have a local dimension. The international Science Shop activities show the strengths of international cooperation to break out of the local and to bring local issues on the international agenda. Detailed information about the Science Shop concept and daily routines of a Science Shop can be found at the Living Knowledge website (www.livingknowledge.org, e.g. at the FAQ section and in the toolbox.

  9. Tachyon constant-roll inflation

    Science.gov (United States)

    Mohammadi, A.; Saaidi, Kh.; Golanbari, T.

    2018-04-01

    The constant-roll inflation is studied where the inflaton is taken as a tachyon field. Based on this approach, the second slow-roll parameter is taken as a constant which leads to a differential equation for the Hubble parameter. Finding an exact solution for the Hubble parameter is difficult and leads us to a numerical solution for the Hubble parameter. On the other hand, since in this formalism the slow-roll parameter η is constant and could not be assumed to be necessarily small, the perturbation parameters should be reconsidered again which, in turn, results in new terms appearing in the amplitude of scalar perturbations and the scalar spectral index. Utilizing the numerical solution for the Hubble parameter, we estimate the perturbation parameter at the horizon exit time and compare it with observational data. The results show that, for specific values of the constant parameter η , we could have an almost scale-invariant amplitude of scalar perturbations. Finally, the attractor behavior for the solution of the model is presented, and we determine that the feature could be properly satisfied.

  10. An Exploratory Analysis of Online Shopping Behavior in Turkey

    Directory of Open Access Journals (Sweden)

    Adnan Veysel Ertemel

    2017-06-01

    Full Text Available Alongside the technologic developments, transformation in user behavior and business models has been observed. New areas and models are emerged in a lot of grounds like the communication of people or daily activities. So a new face put for shopping behavior by the e-commerce, which is one of the novelties. This study tries to research online shopping behavior in Turkey. With a quantitative research, device usage, the reasons behind to shop or not to shop online, online shopping category and e-commerce site preferences, payment methods, international e-commerce and online marketplace usage is investigated. As implications of the research, “saving time“ is found to be the foremost reason for shopping online in Turkey and “travel and bookings” category is found as the most shopped category among the results of the survey.

  11. Cross-border shopping and tourism destination marketing

    DEFF Research Database (Denmark)

    Makkonen, Teemu

    2016-01-01

    This article addresses the economic impact that cross-border shopping has on the local tourism industry and the ways that cross-border shopping is taken advantage of in tourism destination marketing. Southern Jutland–situated in Denmark just north of the German border, where border shops situated......-border shopping into tourism destination marketing strategies. The results have wider relevance for other border regions.......This article addresses the economic impact that cross-border shopping has on the local tourism industry and the ways that cross-border shopping is taken advantage of in tourism destination marketing. Southern Jutland–situated in Denmark just north of the German border, where border shops situated...... just south of the same border enable Danes to capitalize on the lower value added tax levels in Germany–is utilized as an illustrative case example. The data was collected by analysing the relevant tourism destination marketing material and via interviews with local destination marketing organizations...

  12. Microstructure Engineering in Hot Strip Mills, Part 1 of 2: Integrated mathematical Model

    Energy Technology Data Exchange (ETDEWEB)

    J.K. Brimacombe; I.V. Samaraseker; E.B. Hawbolt; T.R. Meadowcroft; M. Militzer; W.J. Pool; D.Q. Jin

    1998-09-30

    This report describes the work of developing an integrated model used to predict the thermal history, deformation, roll forces, microstructural evaluation and mechanical properties of steel strip in a hot-strip mill. This achievement results from a join research effort that is part of the American Iron and Steel Institute's (AISI) Advanced Process Control Program, a collaboration between the U.S. DOE and fifteen North American steel makers.

  13. Cold-rolled steel strip X-ray thickness gauge

    International Nuclear Information System (INIS)

    Tong Jianmin; Cong Peng; Li Litao

    2010-01-01

    This paper introduces a cold-rolled steel strip X-ray thickness gauge. This gauge uses two-detector construction including penetrating ionization chamber and measuring ionization chamber. Standard magazine box is composed of three rotating plates driving by stepper motor, including 13 pieces of standard sample to build up 154 thickness value, obtaining standard sample curve covering thickness range of 0.1 mm to 5 mm. Automation system include Siemens S7-200 PLC as key controlling unit, embedded controlling system for data acquisition and computing, and PC as man-machine interface, and employ Ethernet (TCP/IP) or RS485/232 as communication protocol. Reversing Cold mill AGC closed-loop control operation test demonstrates that the gauge can adapt to the severe production environment, operate stably and reliably, measurement precision can reached to ±0.19%, reproducibility to ±0.09%, and stability to ±0.06%, response time range from 4 ms to 200 ms and be adjustable. So it can meet the high demanding of cold-rolled plate/strip production. (authors)

  14. Marketing activities of vape shops across racial/ethnic communities.

    Science.gov (United States)

    Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B; Sussman, Steve

    2016-01-01

    There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community's demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by ethnic composition. Data was gathered in 2014 from a pilot-study on vape shops (n=77) in Los Angeles, which documented the characteristics of shops through employee interviews and in-store observations. Data were collected from shops located in communities that were predominantly, African-American (n=20), Hispanic (n=17), Korean (n=18), or non-Hispanic White (n=22). Sixty-one percent of vape shops had advertisements (print ads and posters) for e-cigarettes and 84% offered discounts. Vape shops in Hispanic communities were more likely to have ethnic specific marketing material compared to shops in other communities. All the shops provided customers with free samples, however those in Korean and non-Hispanic White communities had a significantly higher prevalence of customer accessible free samples. Vape shop marketing practices differed by ethnic community. A large majority of shops provided free samples to their customers, a practice which is now banned by the FDA. It will be important to monitor how vape shops will adjust their marketing strategy because of this ban. Future research should expand on the findings presented here to provide regulators with further crucial information.

  15. The Effects of Shopping Orientations, Consumer Innovativeness, Purchase Experience, and Gender on Intention to Shop for Fashion Products Online

    Directory of Open Access Journals (Sweden)

    Ratih Puspa Nirmala

    2011-02-01

    Full Text Available Nowadays, many fashion retailers or marketers use the power of internet to promote and sell their products. This research examines the effects of consumers’ shopping orientations (brand/fashion consciousness, shopping enjoyment, price consciousness, convenience/time consciousness, shopping confidence, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender on consumers’ intention to shop for fashion products online. Data were collected through online surveys from the population of internet users in Indonesia, aged between 15 and 30 years old (generation Y, who had bought or browsed fashion products through the internet (N=210. This research is a quantitative research which uses purposive sampling and multiple regression analysis. Results show that the effects of several shopping orientations (shopping enjoyment, price consciousness, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender, are significant on consumers’ intention to shop for fashion products online. Furthermore, gender is marginally significant related to consumers’ intention to shop for fashion products online. Surprisingly, women tend to have lower intentions to shop for fashion products online compared to men.

  16. Pengaruh Hedonic Shopping Motivation Terhadap Impulse Buying Pada Toko Online: Studi Pada Toko Online Zalora

    OpenAIRE

    Pasaribu, Lia Octaria; Dewi, Citra Kusuma

    2015-01-01

    Online shopping, including shopping for fashion goods, has become a trend in Indonesia. One of buyer's motivations to do online-fashion-shopping is hedonic shopping motivation. This research aims to examine the influence of hedonic shopping motivation on impulse buying process. Using 100 buyers of Zalora (an online shop) as the respondents, this study confirms that hedonic shopping motivation has a significant influence on the impulse buying process.

  17. Shopping cart injuries, entrapment, and childhood fatality.

    Science.gov (United States)

    Jensen, Lisbeth; Charlwood, Cheryl; Byard, Roger W

    2008-09-01

    Shopping carts may be associated with a variety of injuries, particularly in toddlers and young children. These usually relate to falls from carts or to tip-overs. Injuries that are sustained include hematomas/contusions, abrasions, lacerations, fractures, and fingertip amputations. Fatal episodes are uncommon and are usually due to blunt craniocerebral trauma from falls. A case involving a 19-month-old girl is reported who became entrapped when she inserted her head through the side frame of a cart that had been removed from a supermarket and left at her home address. Death was caused by neck compression. Although rare, the potential for lethal entrapment during unsupervised play means that the presence of stray shopping carts at private residences and in public places, including playgrounds and parks, is of concern. Strategies, such as coin deposits, should be encouraged to assist in the return of such carts to supermarkets.

  18. RFID Data Cleaning for Shop Floor Applications

    Science.gov (United States)

    Ziekow, Holger; Ivantysynova, Lenka; Günter, Oliver

    In several case studies we found that shop-floor applications in manufacturing pose special challenges to cleaning RFID data. The underlying problem in many scenarios is the uncertainty about the exact location of observed RFID tags. Simple filter s provided in common middleware solutions do not cope well with these challenges. Therefore we have developed an approach based on maximum-likelihood estimation to infer a tag's location within the reader range. This enables improved RFID data cleaning in a number of application scenarios. We stress the benefits of our approach along exemplary application scenarios that we found in manufacturing. In simulations and experiments with real world data we show that our approach outperforms existing solutions. Our approach can extend RFID middleware or reader firmware, to improve the use of RFID in a range of shop-floor applications.

  19. Trustworthy Online Shopping with Price Impact

    Directory of Open Access Journals (Sweden)

    Musial Jedrzej

    2017-06-01

    Full Text Available Internet shopping is one of the main pillars of electronic commerce.According to the literature, the Internet Shopping Optimization Problem (ISOPhas been defined in order to optimize the global cost of online purchase, taking into account both the cost of products and shipping. In this study, it was decided to propose and analyze a very interesting, and really substantial, extension of the ISOP.Namely, trust factors were subjected to careful analysis from the customer point of view. The analysis is based on a specially prepared questionnaire, supplemented by the information from the literature and our own observations. Thus, it was possible to propose a definition of a new mathematical model of the problem, and to prove its affiliation to the class of strongly NP-hard problems. In addition, the heuristic algorithm is proposed, which can be used to solve the problem.

  20. Employee motivation improvement at "Drogas" shop

    OpenAIRE

    Konno, Viktorija

    2012-01-01

    Work : Employee motivation improvement at “Drogas” shop for getting baccalaureate in science management. This work includes four parts. In the first section author explained the definition of motivation, there was reviewed motivation's role in enterprise. Author reviewed total motivation's model, which models exist for a long while and how they were changing in process of time. The second part contains wide information about motivation's theories and description of motivation's t...

  1. Maritime Cast Shop Integrated Improvement Plan

    Science.gov (United States)

    2010-08-20

    constraint departments (Upgrade & Radiography). The intent of this visual communication system was to limit the inspection queue to about one days...Install small work status boards in both work areas to facilitate visual communication .  Install protection for water coolant mix pipe... visual communication system to track parts as they move throughout the shop floor. Visual management systems tailored to the unique needs of a company

  2. Shopping intention prediction using decision trees

    Directory of Open Access Journals (Sweden)

    Dario Šebalj

    2017-09-01

    Full Text Available Introduction: The price is considered to be neglected marketing mix element due to the complexity of price management and sensitivity of customers on price changes. It pulls the fastest customer reactions to that change. Accordingly, the process of making shopping decisions can be very challenging for customer. Objective: The aim of this paper is to create a model that is able to predict shopping intention and classify respondents into one of the two categories, depending on whether they intend to shop or not. Methods: Data sample consists of 305 respondents, who are persons older than 18 years involved in buying groceries for their household. The research was conducted in February 2017. In order to create a model, the decision trees method was used with its several classification algorithms. Results: All models, except the one that used RandomTree algorithm, achieved relatively high classification rate (over the 80%. The highest classification accuracy of 84.75% gave J48 and RandomForest algorithms. Since there is no statistically significant difference between those two algorithms, authors decided to choose J48 algorithm and build a decision tree. Conclusions: The value for money and price level in the store were the most significant variables for classification of shopping intention. Future study plans to compare this model with some other data mining techniques, such as neural networks or support vector machines since these techniques achieved very good accuracy in some previous research in this field.

  3. Factor Driving Consumer Intention in Online Shopping

    OpenAIRE

    Wanida Suwunniponth

    2014-01-01

    The objectives of this research paper was to study the influencing factors that contributed the willingness of consumers to purchase products online included quality of website, perceived ease of use, perceived usefulness, trust on online purchases, attitude towards online shopping and intentions to online purchases. The research was conducted in both quantitative and qualitative methods, by utilizing both questionnaire and in-depth interview. A questionnaire was used to collect data from 350...

  4. GENDER AND SHOPPING BEHAVIOR OUTCOMES IN THE CONTEXT OF SHOPPING CENTERS

    Directory of Open Access Journals (Sweden)

    Ioana Nicoleta ABRUDAN

    2016-09-01

    Full Text Available Understanding consumer behavior can be divided into three parts: before visiting the stores or shopping centers, during the visit, and after. From the point of view of the final result intended by retailers, satisfying customers in terms of profitability, all three components are equally important. A relevant segmentation criterion for most products and stores is gender. Previous research suggests that gender influences shopping motivations, the way people shop and shopping behavior outcomes. The purpose of this article is to investigate if there are, indeed, differences between shopping behavior outputs of women and men (affective loyalty (satisfaction and conative loyalty, as found by certain researchers, and also in terms of the factors that influence the formation of conative loyalty. The results confirm that there are few significant differences in the satisfaction level, although for women all values are slightly higher, and none in the repurchase and recommendation intentions between the two genders. Conative loyalty formation (defined as intent to repurchase and recommend takes place differently between the two genders.

  5. Genotoxic damage in auto body shop workers.

    Science.gov (United States)

    Siebel, Anna Maria; Basso da Silva, Luciano

    2010-10-01

    Some studies have shown increased DNA damage among car painters, but other professionals working in auto body and paint shops have not been extensively assessed. The aim of this study was to assess DNA damage in different types of auto body shop workers by measuring micronucleus (MN) levels in exfoliated buccal cells. The mean number of cells with MN per 2000 exfoliated buccal cells was analyzed in three groups of male workers: auto body repair technicians, painters, and office workers (control group). All participants answered a questionnaire inquiring about age, smoking habits, alcohol consumption, work practices, occupational exposure time, job activities, and use of protective equipment. The mean number of cells with MN was 3.50 ± 1.50 in auto body painters, 3.91 ± 2.10 in auto body repair technicians, and 0.80 ± 0.78 in office workers, with a significant difference between the control group and the two other groups (p = 0.0001). Age, occupational exposure time, use of protective masks, alcohol consumption, and smoking habit did not affect MN results. The findings indicate that technicians and painters working in auto body shops are at risk for genotoxic damage, while office workers seem to be protected.

  6. Aesthetic quality inference for online fashion shopping

    Science.gov (United States)

    Chen, Ming; Allebach, Jan

    2014-03-01

    On-line fashion communities in which participants post photos of personal fashion items for viewing and possible purchase by others are becoming increasingly popular. Generally, these photos are taken by individuals who have no training in photography with low-cost mobile phone cameras. It is desired that photos of the products have high aesthetic quality to improve the users' online shopping experience. In this work, we design features for aesthetic quality inference in the context of online fashion shopping. Psychophysical experiments are conducted to construct a database of the photos' aesthetic evaluation, specifically for photos from an online fashion shopping website. We then extract both generic low-level features and high-level image attributes to represent the aesthetic quality. Using a support vector machine framework, we train a predictor of the aesthetic quality rating based on the feature vector. Experimental results validate the efficacy of our approach. Metadata such as the product type are also used to further improve the result.

  7. Rostocker Hof shopping mall; Galerie Rostocker Hof

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1998-06-01

    The Rostocker Hof shopping mall comprises a 151-room hotel, a shopping mall of 45 shops, 22230m{sup 2} of office floor, and an underground garage with 308 parking lots. The following systems are described: Heating systems, air conditioning systems, refrigeration systems, ventilation systems, fire protection systems and electrical installation. Heat is supplied by the district heating grids. Circuit diagrams and flow charts are presented for the heat exchangers and heat supply system, the air conditioning system, the sanitary and sprinkler systems, and the single-room control systems for heat and fresh air supply. (MSK) [Deutsch] Der Rostocker Hof umfasst ein Hotel mit 151 Zimmern, eine Einzelhandelspassage mit 45 Laeden sowie 2230qm Bueronutzungsflaeche und eine Tiefgarage mit 308 Stellplaetzen. Die Haustechnik wird in folgenden Punkten erlaeutert: Heizungtechnik, Klimatechnik, Kaeltetechnik, Lueftungstechnik, Brandschutzanlage sowie Elektroinstallation. Die Waermerversorgung erfolgt durch Fernwaerme. Schaltplaene bzw. Funktionsablaeufe sind fuer die Waermeuebergabestation, die Waermeaufbereitung, die Luftaufbereitungsanlage, die Sanitaer- und Sprinkleranlage sowie fuer die Waerme- und Raumluftregelung der Einzelraeume enthalten. (MSK)

  8. Wear of micro end mills

    DEFF Research Database (Denmark)

    Bissacco, Giuliano; Hansen, Hans Nørgaard; De Chiffre, Leonardo

    2005-01-01

    This paper addresses the important issue of wear on micro end mills considering relevant metrological tools for its characterization and quantification. Investigation of wear on micro end mills is particularly difficult and no data are available in the literature. Small worn volumes cause large...... part. For this investigation 200 microns end mills are considered. Visual inspection of the micro tools requires high magnification and depth of focus. 3D reconstruction based on scanning electron microscope (SEM) images and stereo-pair technique is foreseen as a possible method for quantification...

  9. Fluid management in roll-to-roll nanoimprint lithography

    Science.gov (United States)

    Jain, A.; Bonnecaze, R. T.

    2013-06-01

    The key process parameters of UV roll-to-roll nanoimprint lithography are identified from an analysis of the fluid, curing, and peeling dynamics. The process includes merging of droplets of imprint material, curing of the imprint material from a viscous liquid to elastic solid resist, and pattern replication and detachment of the resist from template. The time and distances on the web or rigid substrate over which these processes occur are determined as function of the physical properties of the uncured liquid, the cured solid, and the roller configuration. The upper convected Maxwell equation is used to model the viscoelastic liquid and to calculate the force on the substrate and the torque on the roller. The available exposure time is found to be the rate limiting parameter and it is O(√Rho /uo), where R is the radius of the roller, ho is minimum gap between the roller and web, and uo is the velocity of the web. The residual layer thickness of the resist should be larger than the gap between the roller and the substrate to ensure complete feature filling and optimal pattern replication. For lower residual layer thickness, the droplets may not merge to form a continuous film for pattern transfer.

  10. The real time rolling shutter

    OpenAIRE

    Monaghan, David; O'Connor, Noel E.; Cleary, Anne; Connolly, Denis

    2015-01-01

    From an early age children are often told either, you are creative you should do art but stay away from science and maths. Or that you are mathematical you should do science but you're not that creative. Compounding this there also exist some traditional barriers of artistic rhetoric that say, "don't touch, don't think and don't be creative, we've already done that for you, you can just look...". The Real Time Rolling Shutter is part of a collaborative Art/Science partnership whose core tenet...

  11. Grooved tube plug rolls in

    International Nuclear Information System (INIS)

    Krausser, P.

    1991-01-01

    The removable plugs used to date by the Power Generation Group (KWU) of Siemens to seal defective steam generator tubes have a good track record. Their sealing principle is based on the elastic tensioning of three seal disks against the inside wall of the tube. Now a further removable plug is available -a roll-in plug with a metal-coated surface. It is particularly suitable for use in the roller-expanded zone of the tubes at the tube sheet. The plugs can be used in both Siemens-KWU steam generators and in steam generators manufactured in compliance with the guidelines of the ASME Code. (author)

  12. ROLL OUT THE TALENT : Final project report

    OpenAIRE

    Eerola, Tuomas; Tuominen, Pirjo; Hakkarainen, Riitta-Liisa; Laurikainen, Marja; Mero, Niina

    2014-01-01

    The ROLL OUT THE TALENT project was born out of the desire to recognise and support the strengths of vocational students and to develop new and innovative operating models. ROLL OUT THE TALENT promoted regional cooperation between institutes and companies. The project produced operating and study path models that take into consideration the individual strengths of vocational students and the principles of lifelong learning. This is the final report of the ROLL OUT THE TALENT project, and ...

  13. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells

    KAUST Repository

    Dupont, Stephanie R.; Oliver, Mark; Krebs, Frederik C.; Dauskardt, Reinhold H.

    2012-01-01

    The interlayer adhesion of roll-to-roll processed flexible inverted P3HT:PCBM bulk heterojunction (BHJ) polymer solar cells is reported. Poor adhesion between adjacent layers may result in loss of device performance from delamination driven

  14. METHOD OF HOT ROLLING URANIUM METAL

    Science.gov (United States)

    Kaufmann, A.R.

    1959-03-10

    A method is given for quickly and efficiently hot rolling uranium metal in the upper part of the alpha phase temperature region to obtain sound bars and sheets possessing a good surface finish. The uranium metal billet is heated to a temperature in the range of 1000 deg F to 1220 deg F by immersion iii a molten lead bath. The heated billet is then passed through the rolls. The temperature is restored to the desired range between successive passes through the rolls, and the rolls are turned down approximately 0.050 inch between successive passes.

  15. Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling

    Science.gov (United States)

    Yu, Hailiang; Lu, Cheng; Tieu, A. Kiet; Li, Huijun; Godbole, Ajit; Kong, Charlie

    2018-06-01

    The roll bonding technique is one of the most widely used methods to produce metal laminate sheets. Such sheets offer interesting research opportunities for both scientists and engineers. In this paper, we report on an experimental investigation of the 'thickness effect' during laminate rolling for the first time. Using a four-high multifunction rolling mill, Cu/Al/Cu laminate sheets were fabricated with a range of thicknesses (16, 40, 70 and 130 μm) of the Al layer. The thickness of the Cu sheets was a constant 300 μm. After rolling, TEM images show good bonding quality between the Cu and Al layers. However, there are many nanoscale pores in the Al layer. The fraction of nanoscale pores in the Al layer increases with a reduction in the Al layer thickness. The finite element method was used to simulate the Cu/Al/Cu rolling process. The simulation results reveal the effect of the Al layer thickness on the deformation characteristics of the Cu/Al/Cu laminate. Finally, we propose that the size effect of the Al layer thickness during Cu/Al/Cu laminate rolling may offer a method to fabricate 'nanoporous' Al sandwich laminate foils. Such foils can be used in electromagnetic shielding of electrical devices and noisy shielding of building.

  16. Fabrication of cold-rolled bands of the alloy-ehi 702 in rolls

    International Nuclear Information System (INIS)

    Zhuchin, V.N.; Gindin, A.Sh.; Shaburov, V.E.; Vladimirov, S.M.; Sokolov, V.A.; Shavkun, V.V.; Perepelitsa, I.V.; Markov, V.V.; Naymov, E.P.; Evstaf'ev, P.P.

    1977-01-01

    The questions are discussed, connected with the manufacture of cold-rolled strip of alloy EI702 in reels from strip blanks. It has been established that in the manufacture of hot-rolled stock from EI702 slabs it is necessary to use powerful rolling equipment because of high resistance to deformation. The reel method for manufacturing EI702 alloy improves the rolled stock and increases percentage of serviceable stock, as well as the output

  17. Forecasting of indirect consumables for a Job Shop

    Science.gov (United States)

    Shakeel, M.; Khan, S.; Khan, W. A.

    2016-08-01

    A job shop has an arrangement where similar machines (Direct consumables) are grouped together and use indirect consumables to produce a product. The indirect consumables include hack saw blades, emery paper, painting brush etc. The job shop is serving various orders at a particular time for the optimal operation of job shop. Forecasting is required to predict the demand of direct and indirect consumables in a job shop. Forecasting is also needed to manage lead time, optimize inventory cost and stock outs. The objective of this research is to obtain the forecast for indirect consumables. The paper shows how job shop can manage their indirect consumables more accurately by establishing a new technique of forecasting. This results in profitable use of job shop by multiple users.

  18. Determinants of Customer Continuance Intention of Online Shopping

    Directory of Open Access Journals (Sweden)

    Al-maghrabi, T.

    2011-01-01

    Full Text Available The purpose of this study is to clarify theory and identify factors that could explain the level of continuance intention of e-shopping. A revised technology acceptance model integrates expectation confirmation theory and investigates effects of age differences. An online survey of internet shoppers in Saudi Arabia. Structural equation modelling and invariance analysis confirm model fit. The findings confirm that perceived usefulness, enjoyment and social pressure are determinants of e-shopping continuance. The structural weights are mostly equivalent between young and old but the regression path from perceived usefulness to social pressure is stronger for younger respondents. This research moves beyond e-shopping intentions to factors affecting e-shopping continuance, explaining 55% of intention to continue shopping online. Online strategies cannot ignore direct and indirect effects on continuance intentions. The findings contribute to literature on internet shopping and continuance intentions in the context of Saudi Arabia.

  19. Census tract correlates of vape shop locations in New Jersey.

    Science.gov (United States)

    Giovenco, Daniel P; Duncan, Dustin T; Coups, Elliot J; Lewis, M Jane; Delnevo, Cristine D

    2016-07-01

    Vape shops are opening across the USA, but little is known about the types of neighborhoods where they are located. This study explores community-level predictors of vape shop locations in New Jersey, USA. Vape shops were identified in July 2015 using a validated systematic online search protocol and geocoded using Google Earth Pro. Multivariable logistic regression identified demographic and other predictors of vape shop presence at the census tract level. Tobacco outlet density was consistently associated with higher odds of vape shop presence after adjusting for covariates (pretail were negatively associated with vapor outlets. Census tracts with a higher proportion of non-Hispanic black residents had significantly lower odds of having a vape shop (β=-0.03, pretail is high, but where fewer racial minorities live. The retail environment may communicate social norms regarding vaping and ultimately influence use behaviors of community residents. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. The impact of science shops on university research and education

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2000-01-01

    Science shops are mediating agencies at universities that give citizens and citizen groups access to the resources of the university through co-operation with students and researchers. Science shops have three aims: to support citizens and citizen groups in their efforts getting influence...... to the impact of science shops on universities and on society are discussed. A typology for the different types of knowledge requested by citizens and citizen groups through science shops is presented (documentation, knowledge building, development of new perspectives). As important aspects of the potentials......, prerequisites and limits to the impact of science shops are discussed the networking between the science shop and the researchers and teachers and with the citizens and other external actors, and the content and the structure of the curricula at the university....

  1. Social image of students who shop and don't shop online.

    Science.gov (United States)

    Lammers, H Bruce; Curren, Mary T; Cours, Deborah; Lammers, Marilyn L

    2003-06-01

    A descriptive survey of a stratified random sample of 326 undergraduates from a large, diverse university in Los Angeles was conducted to assess whether resistance to online shopping might be, in part, related to negative social perceptions of those who shop online. Indirect questioning showed that students perceived online student shoppers as more lazy and less likely to fear for the safety and security of others but also as more trustworthy, attractive, successful, and smart. Differences in social perceptions were not related to these students' own online spending.

  2. Rolling into spatial disorientation: Simulator demonstration of the post-roll (Gillingham) illusion

    NARCIS (Netherlands)

    Nooij, S.A.E.; Groen, E.L.

    2011-01-01

    Introduction: Spatial disorientation (SD) is still a contributing factor in many aviation accidents, stressing the need for adequate SD training scenarios. In this article we focused on the post-roll effect (the sensation of rolling back after a roll maneuver, such as an entry of a coordinated turn)

  3. Uranium mill tailings stabilization

    International Nuclear Information System (INIS)

    Hartley, J.N.; Koehmstedt, P.L.; Esterl, D.J.; Freeman, H.D.

    1980-02-01

    Uranium mill tailings pose a potential radiation health hazard to the public. Therefore, stabilization or disposal of these tailings in a safe and environmentally sound way is needed to minimize radon exhalation and other environmental hazards. One of the most promising concepts for stabilizing U tailings is the use of asphalt emulsion to contain radon and other hazardous materials within uranium tailings. This approach is being investigated at the Pacific Northwest Laboratory. Results of these studies indicate that a radon flux reduction of greater than 99% can be obtained using either a poured-on/sprayed-on seal (3.0 to 7.0 mm thick) or an admixture seal (2.5 to 12.7 cm thick) containing about 18 wt % residual asphalt. A field test was carried out in June 1979 at the Grand Junction tailings pile in order to demonstrate the sealing process. A reduction in radon flux ranging from 4.5 to greater than 99% (76% average) was achieved using a 15.2-cm (6-in.) admix seal with a sprayed-on top coat. A hydrostatic stabilizer was used to apply the admix. Following compaction, a spray coat seal was applied over the admix as the final step in construction of a radon seal. Overburden was applied to provide a protective soil layer over the seal. Included in part of the overburden was a herbicide to prevent root penetration

  4. Optimal experience in online shopping: the influence of flow

    OpenAIRE

    Sharkey, Ultan; Acton, Thomas; Conboy, Kieran

    2012-01-01

    peer-reviewed This research investigates the influences of product presentation modes, decision behaviour and the consumer experience on Internet shopping. The growth of online shopping brings with it cognitive challenges for consumers attempting to assess large numbers of options in purchase decisions. Further, there is little guidance for vendors in terms of presenting large numbers of product. In this study, online shopping is viewed as an information processing, decision ta...

  5. Consumer behavior towards Online shopping of electronics in pakistan

    OpenAIRE

    BASHIR, ADIL

    2013-01-01

    E-commerce has made life simple and innovative of individuals and groups; consumer Behavior in online shopping is different from the physical market where he has access to see the product. The purpose of the research was to study the consumer behavior in online shopping of electronics especially in Pakistan. The main research question in thesis is how consumers behave while shopping online. Primary data was collected through the questionnaire survey and by emails from personal contacts in...

  6. Evaluation of Fresh Food Internet Shopping in Korean Beef

    OpenAIRE

    金, 鍾和; 森高, 正博; 福田, 晋; Kim, Jong-hwa; Moritaka, Masahiro; Fukuda, Susumu

    2013-01-01

    This paper focuses on consumer reactions to the fresh food internet shopping on Korea beef. In the paper, we have analyzed an effective relation in consumer's perceived qualities, the evaluation of commodities and the evaluation of fresh food internet shopping. As a result, two effective relations were found. Firstly, consumer's perceived qualities affect the evaluation of commodities. Secondly, the evaluation of commodities affects t-he evaluation of fresh food internet shopping. This result...

  7. Breaking Out of the Local: International dimensions of science shops

    OpenAIRE

    DeBok, Caspar; Steinhaus, Norbert

    2008-01-01

    In this article we want to give an overview of the international dimension and the interest of the European Union (EU) in the concept of Science Shops. The European Commission (EC) manages the day-to-day business by initiating and implementing EU policies and spending EU funds. The EC support for Science Shops has been an important factor for the international interest and progress of the Science Shop movement. This article will not give detailed information about daily routines of a Science ...

  8. E-commerce factors influencing consumers‘ online shopping decision

    OpenAIRE

    Baubonienė, Živilė; Gulevičiūtė, Gintarė

    2015-01-01

    Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the ben...

  9. Specific energy use in Swedish and Norwegian shopping malls

    Energy Technology Data Exchange (ETDEWEB)

    Stensson, Sofia; Axell, Monica (SP Energy Technology, Boraas (Sweden)); Smaage, Kjell Petter (Evotek AS (Norway)); Fahlen, Per (Chalmers Univ. of Technology, Building Services Engineering, Goeteborg (Sweden))

    2009-07-01

    The prevalence of shopping malls is growing worldwide. Internationally, there are differences in energy use and system solutions due to local outdoor climate, available energy resources, prices, national building regulations, traditions etc. On the other hand, tenants are usually international chains and they often have the same demands regarding indoor climate, system solutions etc. irrespective of the national differences. Shopping malls overall tends to have large lighting loads, high population density and, hence, a large air conditioning demand. There is also an apparent trend towards increasing glass surfaces and such design feature affects the energy balance of the building. For those interested in the energy efficiency of the building and its installations, it is interesting to know how different system solutions affect the energy use. Benchmarking between buildings gives valuable insight to energy efficient design and operation. However, available information on energy use for such benchmarking in shopping malls is still rather limited. This study investigates shopping malls in Sweden and Norway. Available national statistical data on retail and shopping malls are reviewed. Further building statistical data were collected from building owners and managers, covering energy use in 41 shopping malls. Additional energy use data for 115 shops, within three of these shopping malls were also collected. The building statistical data shows that the average energy use in Norwegian and Swedish shopping malls are approximately 291 and 279 kWh/m2/year respectively. The highest energy use exceeds the lowest figure by approximately 50 percent, indicating a significant potential for improvement. Results also show a wide deviation in energy use of the different shops in a shopping mall. The paper further provides a discussion concerning alternative benchmarking methods and necessary improvements to make valid conclusions regarding energy use in shopping malls.

  10. Influence of visualization on consumption during on-line shopping

    OpenAIRE

    Hictaler, Urška

    2013-01-01

    This diploma work studies the influence of visualization on consumption during on-line shopping. The first part of the thesis starts with key areas of visualization, consumption and on-line shopping. Visualization, areas of use, human perception and ways of product presentation in on-line shops are defined discussed first. Next, consumption, consumers and factors that influence their decisions and satisfaction are defined. The last topic in the first part of the thesis discusses on-line shopp...

  11. Customer Buying Behavior : - Online shopping towards electronic product

    OpenAIRE

    Wang, Dan; Yang, Liuzi

    2010-01-01

    ABSTRACT Online shopping in EU has been shown to a good potential market. The electronic equipment takes a high percent of the individuals shopping. Compared with other goods, online shopping of electronic goods adds great convenience to the life of the people. Buying electronic gadgets online gives customers an opportunity to find a great variety of product online, and customers can review a wide selection of products and find special offers and discount with the best deals online. In the co...

  12. Improvement of high-temperature thermomechanical treatment of the rolled section made of VT3-1 alloy

    International Nuclear Information System (INIS)

    Gavze, A.L.; Korostelev, Yu.P.

    2002-01-01

    Changes in mechanical properties and structure are investigated in alloy VT3-1 rods produced with the use of high temperature thermomechanical treatment (HTMT) on their heating and deformation during straightening as well as during preliminary hot deformation of the billets on a helical rolling mill (HRM). It is stated that the straightening at 550-700 deg C with elongation of ∼ 2% results in some decrease of ultimate strength and in essential enhancement of plasticity and impact strength. In a similar manner, preliminary rolling on HRM affects the properties of rods after final heat treatment. It is shown that rod production according to the experimental processing procedure increases the quality of the rods and can be realized when manufacturing rolled products of alloy VT3-1 with the use of HTMT [ru

  13. HESITANCY TOWARDS ONLINE SHOPPING, A STUDY OF PAKISTANI CONSUMERS

    Directory of Open Access Journals (Sweden)

    Usman YOUSAF

    2012-01-01

    Full Text Available To study the influence of Perceived cost, risk, convenience and enjoyment on online consumer purchases. Being more convenient online shopping seems painless compared to in store shopping, why consumers are still reluctant to shop online?.A sample of 220 questionnaires was filled from different departments at University of Sargodha. Respondents were asked to fill the questionnaire based on four factors (Perceived cost, Perceived risk, Perceived convenience, Perceived enjoyment, there were 2 general questions. Out of 220, 207 questionnaires were returned. One sample test is applied in this study to check the reliability of independent variables. Analysis was also done on basis of gender and their ages. The most important factor out of four, which can persuade the customer's online buying decision, is delivery cost for purchased items and it has negative relationship with dependent variable, moreover perceived risk has also negative relationship with dependent one. Perceived convenience and Perceived enjoyment has positive relationship with online shopping preference. As online shopping is easier to do but due to extra delivery cost and risk factors consumers do not adopt online shopping and these factors should be minimized to promote online shopping. Online shopping should be promoted and to gain the consumer confidence, delivery cost and risk factor should be minimized. As online shopping is easier to do as compared to offline shopping but people still reluctant to use internet for online shopping, so to promote online shopping delivery cost and risk factor should be minimized to gain consumers attraction and confidence. People want to experience online shopping but it won’t be promoted until delivery cost and perceived risk factors be reduced. A little work has been done on exploring the factors that influence the online buying decision. These factors are called situational factors and include delivery charges, risk factors, convenience

  14. Consumers preferences of shopping centers in Bratislava (Slovakia

    Directory of Open Access Journals (Sweden)

    Kristína Bilková

    2016-05-01

    Full Text Available There have been changes in the shopping behavior and preferences of consumers in the post-communist countries caused by political changes after 1989. Slovakia is not an exception, and it has been observed a change not only at the consumers’ level but also in retail stores. A notable bearer of such changes was the construction of big shopping centers that were a new phenomenon in shopping. They quickly became popular and changed spatial and shopping patterns of consumers. The main aim of this study is to analyze and evaluate the shopping preferences of consumers based on the example of the capital city – Bratislava (at the level of urban districts. The database consists of results of a questionnaire survey carried out in 2011. Respondents were interviewed inside the shopping center. The partial aims focus on the analysis of consumers’ perceptions, the frequency of their shopping and the mode of transport used for shopping. One of the goals of this study is also to evaluate the perception of consumers in terms of the catchment areas of the chosen shopping center, as well as the perceptional classification of retail in the given area and the accessibility of stores.

  15. Development and industrial mastering hot rolling procedure for low-ductile steels and alloys

    International Nuclear Information System (INIS)

    Degterenko, V.K.; Sokolov, V.A.

    1980-01-01

    The technique for the development of the sheet hot rolling procedure for low-ductile steels and alloys (0Kh17N14M2, 12Kh21N5T, 20Kh25N20C2,40Kh13, 36NKhTYu etc.) is proposed, using plastometer which permits to obtain the data on the deformation resistance in the wide range of temperatures (800-1300 deg C), of deformation degrees (0.1-0.3) and deformation rates (0.001-300 c -1 ). With the help of the plastometric data processed on the computer the calculation of the rolling regimes for the sheet with improved surface quality is carried out at the more uniform loading on the mill stands

  16. 1998 report on results of technological development of super metal. Innovative technological development for producing advanced structure controlled metallic material (high-speed large reduction rolling technology); 1998 nendo super metal no gijutsu kaihatsu seika hokokusho. Kodo soshiki kozo seigyo kinzoku zairyo sosei gijutsu kaihatsu (kosoku daiatsuka atsuen gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A report was made on the 1998 results concerning technological development of super metal. In the 'research and development of super metal', metallurgical examination has been made on crystal grain super refining process using a machining simulator, with studies carried out on crystal grain refining by utilizing large-strain deformation with more than 50% deformation for a single pass and a diploid structure. As a result, it was found that the crystal grain size can be refined to approximately 1{mu}m. Consequently, in fiscal 1998, a high-speed large reduction rolling test equipment was developed capable of rendering a sheathing technology in a mechanically testable size by a rolling method. This test equipment has such capacity as the maximum load of 1,000 ton and the maximum torque of 95 ton/m and is a rolling mill whose scale is largest in the nation on the laboratory level. The rolling speed can be 120mpm, a very fast speed for a large sized rolling mill. Moreover, equipped with an immediate water cooling facility adjacent to the rolls and an automatic operating system for example, it is a high function rolling mill capable of cooling and rolling that render the complex and delicate sheathing technology of super metal. (NEDO)

  17. An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

    OpenAIRE

    Lavlesh Kumar Sharma; Ravindra Mohan Saxena

    2014-01-01

    In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

  18. Roll forming of eco-friendly stud

    Science.gov (United States)

    Keum, Y. T.; Lee, S. Y.; Lee, T. H.; Sim, J. K.

    2013-12-01

    In order to manufacture an eco-friendly stud, the sheared pattern is designed by the Taguchi method and expanded by the side rolls. The seven geometrical shape of sheared pattern are considered in the structural and thermal analyses to select the best functional one in terms of the durability and fire resistance of dry wall. For optimizing the size of the sheared pattern chosen, the L9 orthogonal array and smaller-the-better characteristics of the Taguchi method are used. As the roll gap causes forming defects when the upper-and-lower roll type is adopted for expanding the sheared pattern, the side roll type is introduced. The stress and strain distributions obtained by the FEM simulation of roll-forming processes are utilized for the design of expanding process. The expanding process by side rolls shortens the length of expanding process and minimizes the cost of dies. Furthermore, the stud manufactured by expanding the sheared pattern of the web is an eco-friend because of the scrapless roll-forming process. In addition, compared to the conventionally roll-formed stud, the material cost is lessened about 13.6% and the weight is lightened about 15.5%.

  19. Numerical analysis of Swiss roll metamaterials

    International Nuclear Information System (INIS)

    Demetriadou, A; Pendry, J B

    2009-01-01

    A Swiss roll metamaterial is a resonant magnetic medium, with a negative magnetic permeability for a range of frequencies, due to its self-inductance and self-capacitance components. In this paper, we discuss the band structure, S-parameters and effective electromagnetic parameters of Swiss roll metamaterials, with both analytical and numerical results, which show an exceptional convergence.

  20. Efficient Circulation of Railway Rolling Stock

    NARCIS (Netherlands)

    A. Alfieri (Arianna); R. Groot (Rutger); L.G. Kroon (Leo); A. Schrijver (Lex)

    2002-01-01

    textabstractRailway rolling stock (locomotives, carriages, and train units) is one of the most significant cost sources for operatorsof passenger trains, both public and private. Rolling stock costsare due to material acquisition, power supply, and material maintenance. The efficient circulation of

  1. E-shopping and its interactions with in-store shopping

    NARCIS (Netherlands)

    Farag, Sendy

    2006-01-01

    Nowadays, the Internet permeates society: for many people, life without the Internet is hard to imagine. E-shopping (searching and/or buying products online) has rapidly gained popularity in the past few years, and could affect consumers’ visits to stores. The goal of this research is to show which

  2. “Window Shopping, Granada, 1930s”

    Directory of Open Access Journals (Sweden)

    Mae Claxton

    2010-02-01

    Full Text Available “Window Shopping, Granada, 1930s,” Photographs, p. 16, with the gracious permission of the Eudora Welty FoundationAn African American woman, dressed in her Saturday go-to-town-best, stands outside a store window, chin in hand, contemplating the contents in the window. The image is reflective and thoughtful. What is she thinking? And what lies beyond the frame of this photograph? In Mississippi in the 1930s, could she walk into this store, perhaps try on clothes or hats, and make a purchase? I...

  3. Matching Danish Shop Stewards' Service Demands

    DEFF Research Database (Denmark)

    Navrbjerg, Steen Erik; Larsen, Trine Pernille

    process of the collective bargaining system, which adds more and more tasks on the shoulders of the shop steward and; b) the on-going trend of union mergers. While it could be expected that union merger and the reduction of local branches would entail a lower service level and at democratic deficit...... unions from 1998 to 2011. During the same period, the unions under the confederation reduced the number of branches from 886 to 334; a reduction by 62 per cent. At the same time, a process of decentralisation of the collective bargaining system has taken place since the early 1990s based on the needs...

  4. ARTIFICIAL INTELLIGENCE EFFECTIVENESS IN JOB SHOP ENVIRONMENTS

    OpenAIRE

    OMAR CASTRILLON; WILLIAM SARACHE; JAIME GIRALDO

    2011-01-01

    El objetivo del presente trabajo, es definir una nueva metodología la cual permita comparar la efectividad de algunas de las principales técnicas de inteligencia artificial (aleatorias, búsqueda tabú, minería de datos, algoritmos evolutivos). Esta metodología es aplicada en los procesos de secuenciación de la producción en ambientes job shop, en un problema con N pedidos y M máquinas, donde cada uno de los pedidos debe pasar por todas las máquinas sin importar el orden. Estas técnicas son med...

  5. Mode choice and shopping mall parking

    OpenAIRE

    Ersoy, Fulya Yüksel; Ersoy, Fulya Yuksel

    2012-01-01

    In this thesis, I analyze individuals' mode choice decisions and shopping mall's parking space pricing behavior. Individuals have three choices: first they may come to the mall by car in which case they have to park, second they may come by public transportation, or they do not visit the mall and go for their outside option. The mall determines the price of the good and the parking fee after the government sets public transportation fare. I find that the equilibrium parking fees are always le...

  6. Verification Tools Secure Online Shopping, Banking

    Science.gov (United States)

    2010-01-01

    Just like rover or rocket technology sent into space, the software that controls these technologies must be extensively tested to ensure reliability and effectiveness. Ames Research Center invented the open-source Java Pathfinder (JPF) toolset for the deep testing of Java-based programs. Fujitsu Labs of America Inc., based in Sunnyvale, California, improved the capabilities of the JPF Symbolic Pathfinder tool, establishing the tool as a means of thoroughly testing the functionality and security of Web-based Java applications such as those used for Internet shopping and banking.

  7. Shopping Center Financing: Pricing Loan Default Risk

    OpenAIRE

    Peter Chinloy; James Musumeci

    1994-01-01

    The financing structure of a shopping center is decomposed into an income security and two put options. These put options are respectively held by the borrower against the lender for default, and by the lender against an insurer or reinsurer. The prices of the put option depend on the loan-to-value ration of the loan and on the risk of the investment. The interest rate charged on the loan is the sum of four components: a riskless rate, lender production costs, and the net price of the put opt...

  8. A New Look for the Shopping Mall

    Science.gov (United States)

    1985-01-01

    STRUCTO-FAB, a product of Owens-Corning Fiberglas Corporation, is a lightweight but extremely durable tent-like material made of Fiberglas coated with Teflon. It transmits daylight with a reduced need for artificial lighting. It is an outgrowth of a material formulated by NASA in 1967 as a new space suit fabric. Owens-Corning and DuPont provided the original material, which was the basis for Structo-Fab, a permanent architectural fabric used for shopping malls, sports stadiums, etc.

  9. Constant-roll (quasi-)linear inflation

    Science.gov (United States)

    Karam, A.; Marzola, L.; Pappas, T.; Racioppi, A.; Tamvakis, K.

    2018-05-01

    In constant-roll inflation, the scalar field that drives the accelerated expansion of the Universe is rolling down its potential at a constant rate. Within this framework, we highlight the relations between the Hubble slow-roll parameters and the potential ones, studying in detail the case of a single-field Coleman-Weinberg model characterised by a non-minimal coupling of the inflaton to gravity. With respect to the exact constant-roll predictions, we find that assuming an approximate slow-roll behaviour yields a difference of Δ r = 0.001 in the tensor-to-scalar ratio prediction. Such a discrepancy is in principle testable by future satellite missions. As for the scalar spectral index ns, we find that the existing 2-σ bound constrains the value of the non-minimal coupling to ξphi ~ 0.29–0.31 in the model under consideration.

  10. Analytical method for establishing indentation rolling resistance

    Directory of Open Access Journals (Sweden)

    Gładysiewicz Lech

    2018-01-01

    Full Text Available Belt conveyors are highly reliable machines able to work in special operating conditions. Harsh environment, long distance of transporting and great mass of transported martials are cause of high energy usage. That is why research in the field of belt conveyor transportation nowadays focuses on reducing the power consumption without lowering their efficiency. In this paper, previous methods for testing rolling resistance are described, and new method designed by authors was presented. New method of testing rolling resistance is quite simple and inexpensive. Moreover it allows to conduct the experimental tests of the impact of different parameters on the value of indentation rolling resistance such as core design, cover thickness, ambient temperature, idler travel frequency, or load value as well. Finally results of tests of relationship between rolling resistance and idler travel frequency and between rolling resistance and idler travel speed was presented.

  11. Analytical method for establishing indentation rolling resistance

    Science.gov (United States)

    Gładysiewicz, Lech; Konieczna, Martyna

    2018-01-01

    Belt conveyors are highly reliable machines able to work in special operating conditions. Harsh environment, long distance of transporting and great mass of transported martials are cause of high energy usage. That is why research in the field of belt conveyor transportation nowadays focuses on reducing the power consumption without lowering their efficiency. In this paper, previous methods for testing rolling resistance are described, and new method designed by authors was presented. New method of testing rolling resistance is quite simple and inexpensive. Moreover it allows to conduct the experimental tests of the impact of different parameters on the value of indentation rolling resistance such as core design, cover thickness, ambient temperature, idler travel frequency, or load value as well. Finally results of tests of relationship between rolling resistance and idler travel frequency and between rolling resistance and idler travel speed was presented.

  12. New perspectives on constant-roll inflation

    Science.gov (United States)

    Cicciarella, Francesco; Mabillard, Joel; Pieroni, Mauro

    2018-01-01

    We study constant-roll inflation using the β-function formalism. We show that the constant rate of the inflaton roll is translated into a first order differential equation for the β-function which can be solved easily. The solutions to this equation correspond to the usual constant-roll models. We then construct, by perturbing these exact solutions, more general classes of models that satisfy the constant-roll equation asymptotically. In the case of an asymptotic power law solution, these corrections naturally provide an end to the inflationary phase. Interestingly, while from a theoretical point of view (in particular in terms of the holographic interpretation) these models are intrinsically different from standard slow-roll inflation, they may have phenomenological predictions in good agreement with present cosmological data.

  13. Upscaling of polymer solar cell fabrication using full roll-to-roll processing

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Tromholt, Thomas; Jørgensen, Mikkel

    2010-01-01

    factors (excluding bus bars) of 50, 67 and 75% respectively. In addition modules with lengths of 6, 10, 20, 22.5 and 25 cm were explored. The devices were prepared by full roll-to-roll solution processing in a web width of 305 mm and roll lengths of up to 200 m. The devices were encapsulated...... with a barrier material in a full roll-to-roll process using standard adhesives giving the devices excellent stability during storage and operation. The total area of processed polymer solar cell was around 60 m2 per run. The solar cells were characterised using a roll-to-roll system comprising a solar simulator...... to the cost for electricity using existing technologies the levelized cost of electricity (LCOE) is expected to be significantly higher than the existing technologies due to the inferior operational lifetime. The presented devices are thus competitive for consumer electronics but ill-suited for on...

  14. Einstein-Yang-Mills from pure Yang-Mills amplitudes

    Energy Technology Data Exchange (ETDEWEB)

    Nandan, Dhritiman; Plefka, Jan [Institut für Physik and IRIS Adlershof, Humboldt-Universität zu Berlin,Zum Großen Windkanal 6, D-12489 Berlin (Germany); Schlotterer, Oliver [Max-Planck-Institut für Gravitationsphysik, Albert-Einstein-Institut,Am Mühlenberg 1, D-14476 Potsdam (Germany); Wen, Congkao [I.N.F.N. Sezione di Roma Tor Vergata,Via della Ricerca Scientifica, 00133 Roma (Italy)

    2016-10-14

    We present new relations for scattering amplitudes of color ordered gluons and gravitons in Einstein-Yang-Mills theory. Tree-level amplitudes of arbitrary multiplicities and polarizations involving up to three gravitons and up to two color traces are reduced to partial amplitudes of pure Yang-Mills theory. In fact, the double-trace identities apply to Einstein-Yang-Mills extended by a dilaton and a B-field. Our results generalize recent work of Stieberger and Taylor for the single graviton case with a single color trace. As the derivation is made in the dimension-agnostic Cachazo-He-Yuan formalism, our results are valid for external bosons in any number of spacetime dimensions. Moreover, they generalize to the superamplitudes in theories with 16 supercharges.

  15. Current uranium mill licensing issues

    International Nuclear Information System (INIS)

    Scarano, R.A.

    1977-01-01

    The problems encountered to insure environmentally safe mining and milling of uranium ores are reviewed. Emphasis is placed on the management of tailings resulting from milling operations. It is pointed out that although the concentration of radioactivity in the tailings is relatively low, control measures are necessary because of the large quantities involved and because of the long half-life of the parent radionuclides present. The major concerns with mill tailings are radon release to the atmosphere and isolation of the tailings from the human environment. Since it is anticipated that the amount of tailings created by the year 2000 will be more than an order of magnitude greater than the quantities that have been generated during the past 30 years, it is recommended that all mill tailings storage areas be located remote from public contact and in areas such that disruption and dispersion by natural forces and seepage of toxic materials into ground water systems are reduced to the maximum extent achievable. Technical issues that receive attention during the NRC licensing process for uranium mills and the preparation of environmental impact statements are discussed briefly

  16. Colorado's prospectus on uranium milling

    International Nuclear Information System (INIS)

    Hazle, A.J.; Franz, G.A.; Gamewell, R.

    1982-01-01

    The first part of this paper will discuss Colorado's control of uranium mill tailings under Titles I and II of the Uranium Mill Tailings Radiation Control Act of 1978. Colorado has a legacy of nine inactive mill sites requiring reclamation under Title I, and two presently active plus a number of new mill proposals which must be regulated in accordance with Title II. Past failures in siting and control on the part of federal jurisdictions have left the state with a heavy legacy requiring extensive effort to address impacts to the state's environment and population. The second part of this paper will discuss the remedial action programme authorized under Public Law 92-314 for Mesa Country, where lack of federal control led to the dispersal of several hundred thousand tons of uranium mill tailings on thousands of properties, including hundreds of homes, schools and other structures. Successful completion of the State efforts under both programmes will depend on a high level of funding and on the maintenance of adequate regulatory standards. (author)

  17. Laser based refurbishment of steel mill components

    CSIR Research Space (South Africa)

    Kazadi, P

    2006-03-01

    Full Text Available Laser refurbishment capabilities were demonstrated and promising results were obtained for repair of distance sleeves, foot rolls, descaler cassette, idler rolls. Based on the cost projections and the results of the in-situ testing, components which...

  18. How Traumatic Violence Permanently Changes Shopping Behavior.

    Science.gov (United States)

    Sigirci, Ozge; Rockmore, Marc; Wansink, Brian

    2016-01-01

    Traumatic experiences - such as combat, living in a conflict country or war-torn nation, or experiencing a violent crime or natural disaster - change social relationships and may also influence a life-time of consumer relationships with brands and shopping. Our focus on this previously overlooked area is centered on an analysis of the long-term shopping habits of 355 combat veterans. We show that those who experienced heavy trauma (e.g., heavy combat) exhibited similar disconnection from brands as others have experienced in social relationships. They became more transactional in that they were more open to switching brands, to trying new products, and buying the least expensive alternative (p buying brands even when they cost more (p < 0.00). Trauma, such as combat, may change one's decision horizon. Functionality and price become more important, which is consistent with the idea that they are more focused on the present moment than on building on the past or saving for the future.

  19. Evaluation of the Kids' Shop Smart tour.

    Science.gov (United States)

    Smith, Shannon C; Kalina, Laura

    2004-01-01

    We investigated the impact of the Kids' Shop Smart Tour program on participants' attitudes toward trying new foods and eating a variety of foods, as well as their recognition of Canada's Food Guide to Healthy Eating. Data were collected from parents/caregivers, students in kindergarten to grade 3, and teachers; questionnaires, quizzes, and interviews were used. Questionnaires were sent home with 947 students; 52% of parents/caregivers returned completed questionnaires. Many parents/caregivers reported that their children tried and liked unfamiliar foods on the tour. No significant difference was detected in children's willingness to try new foods or consumption of a greater variety of food before and after the tour. Quiz score differences between participants and a comparison group were not statistically significant. Of the 38 teachers who completed interviews, 97% reported that the program helped them meet curriculum requirements; 95% would recommend the resource to other teachers. Quantitative findings do not indicate that the program increases children's willingness to try new foods or eat a greater variety of food. However, qualitative data revealed that some parents observed their children trying new foods more willingly and demonstrating greater knowledge of and interest in Canada's Food Guide to Healthy Eating. Further research with validated measurement tools is recommended to establish the effectiveness of the Kids' Shop Smart Tour.

  20. How Traumatic Violence Permanently Changes Shopping Behavior

    Directory of Open Access Journals (Sweden)

    Ozge Sigirci

    2016-09-01

    Full Text Available Traumatic experiences – such as combat, living in a conflict country or war-torn nation, or experiencing a violent crime or natural disaster – change social relationships and may also influence a life-time of consumer relationships with brands and shopping. Our focus on this previously overlooked area is centered on an analysis of the long-term shopping habits of 355 combat veterans. We show that those who experienced heavy trauma (e.g., heavy combat exhibited similar disconnection from brands as others have experienced in social relationships. They became more transactional in that they were more open to switching brands, to trying new products, and buying the least expensive alternative (p < 0.01. In contrast, those who had experienced a light trauma were more influenced by ads and more open to buying brands even when they cost more (p < 0.00. Trauma, such as combat, may change one’s decision horizon. Functionality and price become more important, which is consistent with the idea that they are more focused on the present moment than on building on the past or saving for the future.

  1. Ant Foraging Behavior for Job Shop Problem

    Directory of Open Access Journals (Sweden)

    Mahad Diyana Abdul

    2016-01-01

    Full Text Available Ant Colony Optimization (ACO is a new algorithm approach, inspired by the foraging behavior of real ants. It has frequently been applied to many optimization problems and one such problem is in solving the job shop problem (JSP. The JSP is a finite set of jobs processed on a finite set of machine where once a job initiates processing on a given machine, it must complete processing and uninterrupted. In solving the Job Shop Scheduling problem, the process is measure by the amount of time required in completing a job known as a makespan and minimizing the makespan is the main objective of this study. In this paper, we developed an ACO algorithm to minimize the makespan. A real set of problems from a metal company in Johor bahru, producing 20 parts with jobs involving the process of clinching, tapping and power press respectively. The result from this study shows that the proposed ACO heuristics managed to produce a god result in a short time.

  2. Research on optimizing pass schedule of tandem cold mill

    International Nuclear Information System (INIS)

    Lu, C.; Wang, J.S.; Zhao, Q.L.; Liu, X.H.; Wang, G.D.

    2000-01-01

    In this paper, research on pass schedule of tandem cold mill (TCM) is carried out. According to load (reduction, rolling force, motor power) balance, non-linear equations set with variables of inter-stand thickness is constructed. The pass schedule optimization is carried out by solving the non-linear equations set. As the traditional method, the Newton-Raphson method is used for solving the non-linear equations set. In this paper a new simple method is brought up. On basis of the monotone relations between thickness and load, the inter-stands thickness is adjusted dynamically. The solution of non-linear equations set can be converged by iterative calculation. This method can avoid the derivative calculation used by traditional method. So, this method is simple and calculation speed is high. It is suitable for on-line control. (author)

  3. An Approach to Teaching Young Children about "The Shop."

    Science.gov (United States)

    Pramling, Ingrid

    An attempt was made to increase Swedish preschool children's understanding of aspects of commercial enterprise, particularly those of "the shop," by introducing a specific didactic approach to preschool education. Of particular interest were two aspects of the shop: advertising and the principle of trade. A total of 77 children up to 7 years of…

  4. Attitude of students towards online shopping of agricultural products ...

    African Journals Online (AJOL)

    The study examined the attitude of students towards online shopping in selected tertiary institutions in Ogun state. One hundred and thirty-five respondents were sampled using multistage and simple random sampling procedures. Variables measured included their attitude towards online shopping, the factors that affect ...

  5. E-shopping in the Netherlands: does geography matter?

    NARCIS (Netherlands)

    Farag, Sendy; Weltevreden, J.W.J.; Rietbergen, T. van; Dijst, M.J.; Oort, F.G. van

    2006-01-01

    Why consumers shop via the Internet, is a frequently asked question. As yet, the impact of spatial variables on e-shopping has received little attention. In this paper we report our investigation of the spatial distribution of Internet users and online buyers in the Netherlands for the time period

  6. The architectural foundations for agent-based shop floor control

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1998-01-01

    simulation and cell controlenabling technologies. In order to continuethis research effortnew concepts and theories for shop floor control are investigated.This paper reviews the multi-agent concept aimed at investigatingits potential use in shop floor control systems. The paper willalso include a survey...

  7. Smart Shopping Carts: How Real-Time Feedback Influences Spending

    NARCIS (Netherlands)

    Ittersum, van K.; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

    2013-01-01

    Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

  8. Smart shopping carts : How real-time feedback influences spending

    NARCIS (Netherlands)

    van Ittersum, Koert; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

    Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

  9. Health Risk Screening Practices of Pharmacy and Chemist Shops in ...

    African Journals Online (AJOL)

    Methodology: Fifty two pharmacy and chemist shops were selected using simple random number sampling technique from 120 registered pharmacy and chemist shops in Jos Metropolis. A semi-structured questionnaire, examining the screening practice of the sales persons was interviewer administered to all the sales ...

  10. Metalworking Lathe; Machine Shop Work--Intermediate: 9555.03.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The course outline has been prepared as a guide to assist the instructor to plan systematically and to present meaningful lessons to provide the training needed by the machine shop student. This is the third course of instruction in a series of machine shop work courses. The six blocks of instruction contained in this outline are designed to…

  11. Smart shopping carts : How real-time feedback influences spending

    NARCIS (Netherlands)

    van Ittersum, Koert; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

    2013-01-01

    Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

  12. FME Carpentry Shop Keeps Facility in Good Repair | Poster

    Science.gov (United States)

    By Peggy Pearl, Contributing Writer Did you know that what most people call the Carpentry Shop at Facilities Maintenance and Engineering (FME) is actually made up of the three crafts, woodcrafting, painting, and locksmithing?  On any given day, throughout the Frederick National Laboratory campus, you may find shop staff utilizing an assortment of tools and a wide range of

  13. THE LIFE CYCLE OF SHOPPING CENTERS AND POSSIBLE REVITALIZATION STRATEGIES

    Directory of Open Access Journals (Sweden)

    Dabija Dan Cristian

    2009-05-01

    Full Text Available This paper addresses the concept of shopping center life cycle. The concept is considered a possible explanation for the death of certain types of shopping centers and birth of others. Of course that there are also other theories that explains this evolut

  14. Print and Internet Catalog Shopping: Assessing Attitudes and Intentions.

    Science.gov (United States)

    Vijayasarathy, Leo R.; Jones, Joseph M.

    2000-01-01

    Findings of an empirical study that compared individuals' attitudes and intentions to shop using print and Internet catalogs suggest that individuals perceived differences between the two catalog media on the shopping factors of reliability, tangibility, and consumer risk. Product value, pre-order information, post-selection information, shopping…

  15. Constraint-based job shop scheduling with ILOG SCHEDULER

    NARCIS (Netherlands)

    Nuijten, W.P.M.; Le Pape, C.

    1998-01-01

    We introduce constraint-based scheduling and discuss its main principles. An approximation algorithm based on tree search is developed for the job shop scheduling problem using ILOG SCHEDULER. A new way of calculating lower bounds on the makespan of the job shop scheduling problem is presented and

  16. Future Shop: A Model Career Placement & Transition Laboratory.

    Science.gov (United States)

    Floyd, Deborah L.; And Others

    During 1988-89, the Collin County Community College District (CCCCD) conducted a project to develop, implement, and evaluate a model career laboratory called a "Future Shop." The laboratory was designed to let users explore diverse career options, job placement opportunities, and transfer resources. The Future Shop lab had three major components:…

  17. FLOW-SHOP SCHEDULING WITH MULTIPLE OPERATIONS AND TIME LAGS

    NARCIS (Netherlands)

    RIEZEBOS, J; GAALMAN, GJC; GUPTA, JND

    A scheduling system is proposed and developed for a special type of flow shop. Ln this flow shop there is one machine at each stage. A job may require multiple operations at each stage. The first operation of a job on stage j cannot start until the last operation of the job on stage j - 1 has

  18. Improving Interaction between NGO's, Science Shops and Universities

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2005-01-01

    An overview of the results from the INTERACTS research project: Improving Interaction between NGOs, Universities and Science Shops: Experiences and Expectations, running 2002-2004......An overview of the results from the INTERACTS research project: Improving Interaction between NGOs, Universities and Science Shops: Experiences and Expectations, running 2002-2004...

  19. Workload control in job shops, grasping the tap

    NARCIS (Netherlands)

    Land, Martin Jaap

    2004-01-01

    The term job shops is used to indicate companies that produce customer-specific components in small batches. Jobs (production orders) in a job shop are characterised by a large variety of routings and operation processing times. This variety, combined with irregular order arrivals, generally leads

  20. The Impact of Price Disclosure on Dynamic Shopping Decisions

    NARCIS (Netherlands)

    B.G.C. Dellaert (Benedict); V.Y. Golounov (Vladislav); J. Prabhu (Jaideep)

    2005-01-01

    textabstractA potentially powerful way to assist consumers in making dynamic shopping decisions is to disclose price information to them before they shop, for example by posting prices on the Internet. This paper addresses the differential impact of disclosing either only current, or both current

  1. A cross-cultural comparison of expatriates’ shopping behavior

    NARCIS (Netherlands)

    Wijnen, G.J.; Kemperman, A.D.A.M.; Janssen, I.I.

    2012-01-01

    Explored is how shopping centre attributes can be adapted to culture-related shopping behaviour of expatriates. While awareness of consumer ethnicity and effectiveness of culture-based market segmentation are on-going and relevant topics in retailing, there is only limited information available on

  2. Authorizer Shopping: Lessons from Experience and Ideas for the Future

    Science.gov (United States)

    Boast, Lyria; Ellison, Shonaka; Hassel, Bryan C.; Conlan, Sean; Rausch, M. Karega

    2016-01-01

    As charter school authorizers and states have increased performance expectations and grown less hesitant to close failing schools, "authorizer shopping" has emerged as a growing threat to overall charter school quality. Authorizer shopping happens when a charter school chooses or changes its authorizer specifically to avoid…

  3. Typically Female Features in Hungarian Shopping Tourism

    Directory of Open Access Journals (Sweden)

    Gábor Michalkó

    2006-06-01

    Full Text Available Although shopping has been long acknowledged as a major tourist activity, the extent and characteristics of shopping tourism have only recently become the subject of academic research and discussion. As a contribution to this field of knowledge, the paper presents the characteristics of shopping tourism in Hungary, and discusses the typically female features of outbound Hungarian shopping tourism. The research is based on a survey of 2473 Hungarian tourists carried out in 2005. As the findings of the study indicate, while female respondents were altogether more likely to be involved in tourist shopping than male travellers, no significant difference was experienced between the genders concerning the share of shopping expenses compared to their total travel budget. In their shopping behaviour, women were typically affected by price levels, and they proved to be both more selfish and more altruistic than men by purchasing more products for themselves and for their family members. The most significant differences between men and women were found in their product preferences as female tourists were more likely to purchase typically feminine goods such as clothes, shoes, bags and accessories, in the timing of shopping activities while abroad, and in the information sources used by tourists, since interpersonal influences such as friends’, guides’ and fellow travellers’ recommendations played a higher role in female travellers’ decisions.

  4. Attitude theory applied to in-store and online shopping

    NARCIS (Netherlands)

    Dijst, M.J.; Farag, S.; Schwanen, T.

    2005-01-01

    In this study, we investigated whether our understanding of adoption of e-shopping and instore shopping could be advanced through the application of attitude theory. A shortcoming of the analytical frameworks and models featured in attitude theory is that they do not address the issue of what

  5. The yang mills gravity dual

    International Nuclear Information System (INIS)

    Crooks, David E.; Evans, Nick

    2003-01-01

    We describe a ten dimensional supergravity geometry which is dual to a gauge theory that is non-supersymmetric Yang Mills in the infra-red but reverts to N=4 super Yang Mills in the ultra-violet. A brane probe of the geometry shows that the scalar potential of the gauge theory is stable. We discuss the infra-red behaviour of the solution. The geometry describes a Schroedinger equation potential that determines the glueball spectrum of the theory; there is a mass gap and a discrete spectrum. The glueball mass predictions match previous AdS/CFT Correspondence computations in the non-supersymmetric Yang Mills theory, and lattice data, at the 10% level. (author)

  6. Galilean Yang-Mills theory

    International Nuclear Information System (INIS)

    Bagchi, Arjun; Basu, Rudranil; Kakkar, Ashish; Mehra, Aditya

    2016-01-01

    We investigate the symmetry structure of the non-relativistic limit of Yang-Mills theories. Generalising previous results in the Galilean limit of electrodynamics, we discover that for Yang-Mills theories there are a variety of limits inside the Galilean regime. We first explicitly work with the SU(2) theory and then generalise to SU(N) for all N, systematising our notation and analysis. We discover that the whole family of limits lead to different sectors of Galilean Yang-Mills theories and the equations of motion in each sector exhibit hitherto undiscovered infinite dimensional symmetries, viz. infinite Galilean Conformal symmetries in D=4. These provide the first examples of interacting Galilean Conformal Field Theories (GCFTs) in D>2.

  7. Galilean Yang-Mills theory

    Energy Technology Data Exchange (ETDEWEB)

    Bagchi, Arjun [Center for Theoretical Physics, Massachusetts Institute of Technology,77 Massachusetts Avenue, Cambridge, MA 02139 (United States); Basu, Rudranil [Saha Institute of Nuclear Physics,Block AF, Sector 1, Bidhannagar, Kolkata 700068 (India); Kakkar, Ashish [Indian Institute of Science Education and Research,Dr Homi Bhabha Road, Pashan. Pune 411008 (India); Mehra, Aditya [Indian Institute of Science Education and Research,Dr Homi Bhabha Road, Pashan. Pune 411008 (India); Van Swinderen Institute for Particle Physics and Gravity, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands)

    2016-04-11

    We investigate the symmetry structure of the non-relativistic limit of Yang-Mills theories. Generalising previous results in the Galilean limit of electrodynamics, we discover that for Yang-Mills theories there are a variety of limits inside the Galilean regime. We first explicitly work with the SU(2) theory and then generalise to SU(N) for all N, systematising our notation and analysis. We discover that the whole family of limits lead to different sectors of Galilean Yang-Mills theories and the equations of motion in each sector exhibit hitherto undiscovered infinite dimensional symmetries, viz. infinite Galilean Conformal symmetries in D=4. These provide the first examples of interacting Galilean Conformal Field Theories (GCFTs) in D>2.

  8. MATERIALISTIC VALUES, SHOPPING, AND LIFE SATISFACTION IN ROMANIA

    Directory of Open Access Journals (Sweden)

    VALERIU FRUNZARU

    2015-11-01

    Full Text Available Numerous studies have shown that generally materialists are less happy than those lower in materialism. Several studies confirm that people who experience a lower level of life satisfaction are more interested in shopping; therefore materialism determines directly and indirectly (mediated by life satisfaction the desire of going shopping. There are only few studies that deal with this topic within Romanian consumers. The conceptual model proposed here was tested on a convenience sample of 390 Romanians. Using structural equation modelling, our findings confirm the hypothetical model only partially. Materialism leads to life dissatisfaction and shopping, but life dissatisfaction does not increase shopping. To the contrary, there is a positive relationship between life satisfaction and the desire for shopping. One possible explanation is that Romanians perceive materialism as a positive attitude. Anyway, nuances should be considered regarding the role of money and possession in bringing life satisfaction

  9. Effects of Website Interactivity on Online Retail Shopping Behavior

    Science.gov (United States)

    Islam, Hafizul

    Motivations to engage in retail online shopping can include both utilitarian and hedonic shopping dimensions. To cater to these consumers, online retailers can create a cognitively and esthetically rich shopping environment, through sophisticated levels of interactive web utilities and features, offering not only utilitarian benefits and attributes but also providing hedonic benefits of enjoyment. Since the effect of interactive websites has proven to stimulate online consumer’s perceptions, this study presumes that websites with multimedia rich interactive utilities and features can influence online consumers’ shopping motivations and entice them to modify or even transform their original shopping predispositions by providing them with attractive and enhanced interactive features and controls, thus generating a positive attitude towards products and services offered by the retailer. This study seeks to explore the effects of Web interactivity on online consumer behavior through an attitudinal model of technology acceptance.

  10. Nurses' shop stewards and their collaboration with management

    DEFF Research Database (Denmark)

    Bild, Tage; Hjalager, Anne-Mette; Lassen, Morten Staun

    2009-01-01

    Purpose - This study investigates the collaboration between Danish nurses' shop stewards and workplace management. The aim of the study is to track changes in workplace climate after a major structural reform of the health sector. Design/methodology/approach - The data source for the study...... is a comprehensive survey among union representatives in the health and care sectors. Findings - Generally, and not surprisingly, shops stewards maintain closer relations and a higher degree of loyalty to the nearest managers rather than management at higher levels in the hierarchy. It can also be demonstrated...... that more experienced shop stewards, those who have been employed in this position and in the workplace for the longest terms have more affirmative relations to management than less experienced shop stewards with shorter tenure. Those shop stewards who spend much time on the entitled duties are rewarded...

  11. Inflation with a constant rate of roll

    International Nuclear Information System (INIS)

    Motohashi, Hayato; Starobinsky, Alexei A.; Yokoyama, Jun'ichi

    2015-01-01

    We consider an inflationary scenario where the rate of inflaton roll defined by ·· φ/H φ-dot remains constant. The rate of roll is small for slow-roll inflation, while a generic rate of roll leads to the interesting case of 'constant-roll' inflation. We find a general exact solution for the inflaton potential required for such inflaton behaviour. In this model, due to non-slow evolution of background, the would-be decaying mode of linear scalar (curvature) perturbations may not be neglected. It can even grow for some values of the model parameter, while the other mode always remains constant. However, this always occurs for unstable solutions which are not attractors for the given potential. The most interesting particular cases of constant-roll inflation remaining viable with the most recent observational data are quadratic hilltop inflation (with cutoff) and natural inflation (with an additional negative cosmological constant). In these cases even-order slow-roll parameters approach non-negligible constants while the odd ones are asymptotically vanishing in the quasi-de Sitter regime

  12. Design and analysis of roll cage

    Science.gov (United States)

    Angadi, Gurusangappa; Chetan, S.

    2018-04-01

    Wildlife fire fighting vehicles are used to extinguish fires in forests, in this process vehicles face falling objects like rocks, tree branches and other objects. Also due to uneven conditions of the terrain like cliff edges, uneven surfaces etc. makes the vehicle to roll over and these can cause injuries to both the driver and the operator. Roll over of a vehicle is a common incident which makes fatal injuries to the operator and also stands next to the crash accidents. In order to reduce the injury level and continuous roll over of the vehicle it is necessary to equip suitable roll cage according to standards of vehicle. In this present work roll cage for pump operator in wildfire fighting vehicle is designed and analysis is carried out in computer simulated environment when seating position of operator seated outside of the cabin. According to NFPA 1906 standards wildlife fire apparatus, Design and Test procedures that are carried out in Hyperworks maintaining SAE J1194.1983 standards. G load case, roof crush analysis and pendulum impact analysis tests are carried out on roll cage to ensure the saftey of design. These load cases are considerd to satisfy the situation faced in forest terrain. In these test procedures roll cage is analysed for stresses and deformation in various load cases. After recording results these are compared with standards mentioned in SAE J1194.1983.

  13. Inflationary dynamics with a smooth slow-roll to constant-roll era transition

    Energy Technology Data Exchange (ETDEWEB)

    Odintsov, S.D. [ICREA, Passeig Luis Companys, 23, 08010 Barcelona (Spain); Oikonomou, V.K., E-mail: odintsov@ieec.uab.es, E-mail: v.k.oikonomou1979@gmail.com [Laboratory for Theoretical Cosmology, Tomsk State University of Control Systems and Radioelectronics (TUSUR), Lenin Avenue 40, 634050 Tomsk (Russian Federation)

    2017-04-01

    In this paper we investigate the implications of having a varying second slow-roll index on the canonical scalar field inflationary dynamics. We shall be interested in cases that the second slow-roll can take small values and correspondingly large values, for limiting cases of the function that quantifies the variation of the second slow-roll index. As we demonstrate, this can naturally introduce a smooth transition between slow-roll and constant-roll eras. We discuss the theoretical implications of the mechanism we introduce and we use various illustrative examples in order to better understand the new features that the varying second slow-roll index introduces. In the examples we will present, the second slow-roll index has exponential dependence on the scalar field, and in one of these cases, the slow-roll era corresponds to a type of α-attractor inflation. Finally, we briefly discuss how the combination of slow-roll and constant-roll may lead to non-Gaussianities in the primordial perturbations.

  14. The Role of Nano-TiO2 Lubricating Fluid on the Hot Rolled Surface and Metallographic Structure of SS41 Steel

    Directory of Open Access Journals (Sweden)

    Yanan Meng

    2018-02-01

    Full Text Available In this paper, nano-TiO2lubricating fluid was chosen as an advanced rolling lubricant to investigate its effect on the hot rolled surface and metallographic structure of SS41 steel strips. The tribological performances of nano-TiO2 lubricating fluid were measured by a four-ball tribotester. The hot rolling experiments under different lubrication conditions were carried out by a four-high rolling mill. The surface morphology, oxide scales and metallographic structure after hot rolling were observed using a confocal laser scanning microscope and scanning electron microscope (SEM, respectively. The composition of surface attachments was analyzed with X-ray photoelectron spectroscopy (XPS. The results indicate that the nano-TiO2 lubricating fluid has a better tribological performance. The surface defects on the hot rolled surface could be decreased. The phase composition of the surface still appears as a mixture of ferrite and pearlite. The surface of steel strips is not micro-alloyed with titanium as predicted. Additionally, the grain size of rolled steel strips which were lubricated with the nano-TiO2lubricating fluid decreased by nearly 50%, compared with traditional lubricating fluid. Furthermore, it was found that the thickness of the oxide layers on the surface reduced, whilst the Rockwell hardness of the oxide layers was enhanced as nano-TiO2 lubricating fluid was applied.

  15. Uranium mill tailings and radon

    International Nuclear Information System (INIS)

    Hanchey, L.A.

    1981-01-01

    The major health hazard from uranium mill tailings is presumed to be respiratory cancer resulting from the inhalation of radon daughter products. A review of studies on inhalation of radon and its daughters indicates that the hazard from the tailings is extremely small. If the assumptions used in the studies are correct, one or two people per year in the US may develop cancer as a result of radon exhaled from all the Uranium Mill Tailings Remedial Action Program sites. The remedial action should reduce the hazard from the tailings by a factor of about 100

  16. Soil Carbon 4 per mille

    Science.gov (United States)

    Minasny, Budiman; van Wesemael, Bas

    2017-04-01

    The '4 per mille Soils for Food Security and Climate' was launched at the COP21 aiming to increase global soil organic matter stocks by 4 per mille (or 0.4 %) per year as a compensation for the global emissions of greenhouse gases by anthropogenic sources. This paper surveyed the soil organic carbon (SOC) stock estimates and sequestration potentials from 20 regions in the world (New Zealand, Chile, South Africa, Australia, Tanzania, Indonesia, Kenya, Nigeria, India, China Taiwan, South Korea, China Mainland, United States of America, France, Canada, Belgium, England & Wales, Ireland, Scotland, and Russia) and asked whether the 4 per mille initiative is feasible. This study highlights region specific efforts and scopes for soil carbon sequestration. Reported soil C sequestration rates generally show that under best management practices, 4 per mille or even higher sequestration rates can be accomplished. High C sequestration rates (up to 10 per mille) can be achieved for soils with low initial SOC stock (topsoil less than 30 t C ha-1), and at the first twenty years after implementation of best management practices. In addition, areas that have reached equilibrium but not at their saturation level will not be able to further increase their sequestration. We found that most studies on SOC sequestration globally only consider topsoil (up to 0.3 m depth), as it is considered to be most affected by management techniques. The 4 per mille initiative was based on a blanket calculation of the whole global soil profile C stock, however the potential to increase SOC is mostly on managed agricultural lands. If we consider 4 per mille on global topsoil of agricultural land, SOC sequestration is about 3.6 Gt C per year, which effectively offset 40% of global anthropogenic greenhouse gas emissions. As a strategy for climate change mitigation, soil carbon sequestration buys time over the next ten to twenty years while other effective sequestration and low carbon technologies become

  17. Uranium mill tailings and radon

    Energy Technology Data Exchange (ETDEWEB)

    Hanchey, L A

    1981-04-01

    The major health hazard from uranium mill tailings is presumed to be respiratory cancer resulting from the inhalation of radon daughter products. A review of studies on inhalation of radon and its daughters indicates that the hazard from the tailings is extremely small. If the assumptions used in the studies are correct, one or two people per year in the United States may develop cancer as a result of radon exhaled from all the Uranium Mill Tailings Remedial Action program sites. The remedial action should reduce the hazard from the tailings by a factor of about 100.

  18. Uranium mill tailings and radon

    Energy Technology Data Exchange (ETDEWEB)

    Hanchey, L A

    1981-01-01

    The major health hazard from uranium mill tailings is presumed to be respiratory cancer resulting from the inhalation of radon daughter products. A review of studies on inhalation of radon and its daughters indicates that the hazard from the tailings is extremely small. If the assumptions used in the studies are correct, one or two people per year in the US may develop cancer as a result of radon exhaled from all the Uranium Mill Tailings Remedial Action Program sites. The remedial action should reduce the hazard from the tailings by a factor of about 100.

  19. Impact of e-shopping on shopping-related travel behaviour: Analyses of the Netherlands Mobility Panel data.

    NARCIS (Netherlands)

    Hoogendoorn-Lanser, S.; Olde Kalter, Marie-José José Theresia; Schaap, Nina

    2015-01-01

    From the moment e-shopping emerged, there are speculations about the impact that would have on personal mobility. Questions about the impact of e-shopping on mobility increase due to media coverage on the sharp increase in turnover of Internet purchases and the increasing number of consumers that

  20. Look! It's Rock'n'roll!

    DEFF Research Database (Denmark)

    Lindelof, Anja

    2007-01-01

    , and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- Anja Mølle Lindelof. (2007). Look! it's rock'n'roll! how television participated in shaping the visual genre conventions of popular music...... to personal names, capitalization, and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- Anja Mølle Lindelof. "Look! It's Rock'n'roll! How television participated in shaping the visual genre....... Pay special attention to personal names, capitalization, and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- TY - JOUR T1 - Look! It's Rock'n'roll! How television participated in shaping...

  1. Replication of nanopits and nanopillars by roll-to-roll extrusion coating using a structured cooling roll

    DEFF Research Database (Denmark)

    Murthy, Swathi; Pranov, Henrik; Pedersen, Henrik Chresten

    2016-01-01

    This paper investigates a novel, very high throughput, roll-to-roll (R2R) process for nanostructuring of polymer foils, called R2R extrusion coating. It has the potential to accelerate the integration of nanostructured materials in consumer products for a variety of applications, including optical....../height of 100 nm. The best replication was achieved in polypropylene, by running at high roller line-speed of 60 m/min, and high cooling roller temperature of 70°C. Replication in other common polymers like polyethylene and polystyrene was not possible for the parameter range used for the investigation......., technical, and functional surfaces and devices. In roll-to-roll extrusion coating, a molten polymer film is extruded through a flat die forming a melt curtain, and then laminated onto a carrier foil. The lamination occurs as the melt curtain is pressed between a cooling roller and a counter roller...

  2. Method of Maintaining the Required Values of Surface Roughness and Prediction of Technological Conditions for Cold Sheet Rolling

    Directory of Open Access Journals (Sweden)

    Valíček J.

    2014-06-01

    Full Text Available The paper is based on results obtained from topography of surfaces of sheets rolled from deep-drawing steel of the type KOHAL grade 697, non-alloy low-carbon structural steel EN 10263-2:2004 and aluminium. The presented results document correctness of the assumption that the rolling force Froll increases with the increasing reduction Δh and the quality of the rolled surface is improved at the simultaneous increasing of strength of rolled sheets and the decreasing of size of structural grains. The experiment was performed on the two-high rolling stand DUO 210 SVa, which enables only non-continuous technology in contrast to the rolling mill with continuous reduction on one sheet in several degrees on rolling trains, in consequence of which the obtained height parameters of the section are in close correlation with the predicted dependence. Contribution of the work consists in the creation of a mathematical model (algorithm for predicting technological parameters of the two-high rolling stand DUO 210 SVa at change of the absolute reduction Δh, for example for a deep-drawing steel of the type KOHAL grade 697 and non-alloy lowcarbon structural steel PN EN 10263-2:2004 and aluminium, and also in the development of a method of calculation applicable to any material being rolled in general, because the authors have found that various materials can be differentiated by a derived analytical criterion IKP. This criterion is a function of ratio between the modulus of elasticity of reference material and that of actually rolled material. The reference material is here deep-drawing steel of the type KOHAL grade 697. Verification was carried out by measuring changes of final surface roughness profile and final strength of rolled sheets of the stated materials in relation to reductions and those were compared with theoretically predicted values. It is possible to identify and predict on the basis of this algorithm an instant state of surface topography in

  3. EPA's role in uranium mining and milling

    International Nuclear Information System (INIS)

    Smith, P.B.

    1980-01-01

    EPA's role and actions in regulating uranium mining and milling are reviewed and updated. Special emphasis is given to EPA's current activities under the Uranium Mill Tailings Radiation Control Act of 1978

  4. Microstructure and functional properties of micro- and nanostructure metal composites obtained by diffusion welding and rolling of multilayer packages

    Energy Technology Data Exchange (ETDEWEB)

    Korzhov, Valery P.; Karpov, Michael I., E-mail: korzhov@issp.ac.ru [Institute of Solid State Physics, Russian Academy of Sciences, Chernogolovka (Russian Federation)

    2011-07-01

    Multilayered nanostructure composites of Cu/Fe, Cu/Nb, and Cu/(Nb/NbTi) with an ≤10 nm the average thickness of individual layers mechanical and superconducting properties which are implemented immediately after rolling, and micro- and nanostructure composites of Ni/Al, Ti/Ni, and (Cu/Nb)/Cu12Sn functional properties which, in contrast to the first, are manifested after rolling and heat treatment were investigated. Composites of (Cu/Nb)/Cu12Sn in final form were a multilayer tape of superconducting compound Nb{sub 3}Sn. Welding of stacks carried by heat treatment under pressure and rolling mill in a vacuum with heating to 900-950°C and large (∼30%) compression in a single pass. The microstructure was investigated by scanning electron microscopy and X-ray analysis. For superconducting composites critical current density and upper critical magnetic field were measured. Shown that the pinning of superconducting vortices in alloys of NbTi are occurred at interlayer Nb- NbTi boundaries. Change in hardness and strength of multilayer composites under rolling deformation is described by the expression of the Hall-Petch relationship, in which instead of the grain size appeared thick of layers. Key words: multilayered composite, micro- and nanostructure, NbTi alloy, superconducting compound, rolling, heat treatment, the superconducting properties, hardness, strength, superconducting vortices, the Hall-Petch expression.

  5. Study on the Surface Integrity of a Thin-Walled Aluminum Alloy Structure after a Bilateral Slid Rolling Process

    Directory of Open Access Journals (Sweden)

    Laixiao Lu

    2016-04-01

    Full Text Available For studying the influence of a bilateral slid rolling process (BSRP on the surface integrity of a thin-walled aluminum alloy structure, and revealing the generation mechanism of residual stresses, a self-designed BSRP appliance was used to conduct rolling experiments. With the aid of a surface optical profiler, an X-ray stress analyzer, and a scanning electron microscope (SEM, the differences in surface integrity before and after BSRP were explored. The internal changing mechanism of physical as well as mechanical properties was probed. The results show that surface roughness (Ra is reduced by 23.7%, microhardness is increased by 21.6%, and the depth of the hardening layer is about 100 μm. Serious plastic deformation was observed within the subsurface of the rolled region. The residual stress distributions along the depth of the rolling surface and milling surface were tested respectively. Residual stresses with deep and high amplitudes were generated via the BSRP. Based on the analysis of the microstructure, the generation mechanism of the residual stresses was probed. The residual stress of the rolling area consisted of two sections: microscopic stresses caused by local plastic deformation and macroscopic stresses caused by overall non-uniform deformation.

  6. 75 FR 71463 - Woodland Mills Corporation Mill Spring, NC; Notice of Revised Determination on Reconsideration

    Science.gov (United States)

    2010-11-23

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,695] Woodland Mills Corporation Mill Spring, NC; Notice of Revised Determination on Reconsideration By application dated July 22... regarding the eligibility of workers and former workers of Woodland Mills Corporation, Mill Spring, North...

  7. Combination process of diamond machining and roll-to-roll UV-replication for thin film micro- and nanostructures

    Science.gov (United States)

    Väyrynen, J.; Mönkkönen, K.; Siitonen, S.

    2016-09-01

    Roll-to-roll (R2R) ultraviolet (UV) curable embossing replication process is a highly accurate and cost effective way to replicate large quantities of thin film polymer parts. These structures can be used for microfluidics, LED-optics, light guides, displays, cameras, diffusers, decorative, laser sensing and measuring devices. In the R2R UV-process, plastic thin film coated with UV-curable lacquer, passes through an imprinting embossing drum and is then hardened by an UV-lamp. One key element for mastering this process is the ability to manufacture a rotating drum containing micro- and nanostructures. Depending on the pattern shapes, the drum can be directly machined by diamond machining or it can be done through wafer level lithographical process. Due to the shrinkage of UV-curable lacquer, the R2R drum pattern process needs to be prototyped few times, in order to get the desired performance and shape from the R2R produced part. To speed up the prototyping and overall process we have developed a combination process where planar diamond machining patterns are being turned into a drum roller. Initially diamond machined patterns from a planar surface are replicated on a polymer sheet using UV-replication. Secondly, a nickel stamper shim is grown form the polymer sheet and at the end the stamper is turned into a roller and used in the R2R process. This process allows various micro milled, turned, grooved and ruled structures to be made at thin film products through the R2R process. In this paper, the process flow and examples of fabricating R2R embossed UVcurable thin film micro- and nanostructures from planar diamond machined patterns, is reported.

  8. Would John Stuart Mill have regulated pornography?

    OpenAIRE

    McGlynn, C.; Ward, I.

    2014-01-01

    John Stuart Mill dominates contemporary pornography debates where he is routinely invoked as an authoritative defence against regulation. This article, by contrast, argues that a broader understanding of Mill's ethical liberalism, his utilitarianism, and his feminism casts doubt over such an assumption. New insights into Mill's approach to sex, sexual activity, and the regulation of prostitution reveal an altogether more nuanced and activist approach. We conclude that John Stuart Mill would a...

  9. An improved sheep flock heredity algorithm for job shop scheduling and flow shop scheduling problems

    Directory of Open Access Journals (Sweden)

    Chandramouli Anandaraman

    2011-10-01

    Full Text Available Job Shop Scheduling Problem (JSSP and Flow Shop Scheduling Problem (FSSP are strong NP-complete combinatorial optimization problems among class of typical production scheduling problems. An improved Sheep Flock Heredity Algorithm (ISFHA is proposed in this paper to find a schedule of operations that can minimize makespan. In ISFHA, the pairwise mutation operation is replaced by a single point mutation process with a probabilistic property which guarantees the feasibility of the solutions in the local search domain. A Robust-Replace (R-R heuristic is introduced in place of chromosomal crossover to enhance the global search and to improve the convergence. The R-R heuristic is found to enhance the exploring potential of the algorithm and enrich the diversity of neighborhoods. Experimental results reveal the effectiveness of the proposed algorithm, whose optimization performance is markedly superior to that of genetic algorithms and is comparable to the best results reported in the literature.

  10. Roll paper pilot. [mathematical model for predicting pilot rating of aircraft in roll task

    Science.gov (United States)

    Naylor, F. R.; Dillow, J. D.; Hannen, R. A.

    1973-01-01

    A mathematical model for predicting the pilot rating of an aircraft in a roll task is described. The model includes: (1) the lateral-directional aircraft equations of motion; (2) a stochastic gust model; (3) a pilot model with two free parameters; and (4) a pilot rating expression that is a function of rms roll angle and the pilot lead time constant. The pilot gain and lead time constant are selected to minimize the pilot rating expression. The pilot parameters are then adjusted to provide a 20% stability margin and the adjusted pilot parameters are used to compute a roll paper pilot rating of the aircraft/gust configuration. The roll paper pilot rating was computed for 25 aircraft/gust configurations. A range of actual ratings from 2 to 9 were encountered and the roll paper pilot ratings agree quite well with the actual ratings. In addition there is good correlation between predicted and measured rms roll angle.

  11. Plasmonic color metasurfaces fabricated by a high speed roll-to-roll method

    DEFF Research Database (Denmark)

    Murthy, Swathi; Pranov, Henrik; Feidenhans'l, Nikolaj Agentoft

    2017-01-01

    Lab-scale plasmonic color printing using nano-structured and subsequently metallized surfaces have been demonstrated to provide vivid colors. However, upscaling these structures for large area manufacturing is extremely challenging due to the requirement of nanometer precision of metal thickness....... In this study, we have investigated a plasmonic color meta-surface design that can be easily upscaled. We have demonstrated the feasibility of fabrication of these plasmonic color surfaces by a high-speed roll-to-roll method, comprising roll-to-roll extrusion coating at 10 m min-1 creating a polymer foil having...... 100 nm deep pits of varying sub-wavelength diameter and pitch length. Subsequently this polymer foil was metallized and coated also by high-speed roll-to-roll methods. The perceived colors have high tolerance towards the thickness of the metal layer, when this thickness exceeds the depths of the pits...

  12. The Virtual Shopping Experience: using virtual presence to motivate online shopping

    OpenAIRE

    Carolyn Chin; Paula Swatman; Paula Swatman

    2005-01-01

    Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is nee...

  13. Online Prediction under Model Uncertainty Via Dynamic Model Averaging: Application to a Cold Rolling Mill

    National Research Council Canada - National Science Library

    Raftery, Adrian E; Karny, Miroslav; Andrysek, Josef; Ettler, Pavel

    2007-01-01

    ... is. We develop a method called Dynamic Model Averaging (DMA) in which a state space model for the parameters of each model is combined with a Markov chain model for the correct model. This allows the (correct...

  14. 77 FR 14837 - Bioassay at Uranium Mills

    Science.gov (United States)

    2012-03-13

    ... NUCLEAR REGULATORY COMMISSION [NRC-2012-0057] Bioassay at Uranium Mills AGENCY: Nuclear Regulatory..., ``Bioassay at Uranium Mills.'' This guide describes a bioassay program acceptable to the NRC staff for uranium mills and applicable portions of uranium conversion facilities where the possibility of exposure...

  15. Chevron's Panna Maria mill process description

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Key features of Chevron's Uranium Mill located near Panna Maria, Texas, are described. The mill is designed to process a nominal 2500 dry tons/day of uranium bearing ore containing 15% uncombined moisture. The following operations at the mill are highlighted: ore receiving, grinding, leaching, countercurrent decantation and tailings disposal, filtering, solvent extraction, solvent stripping, precipitation, drying, and packaging

  16. Ground beetle populations near a kraft mill

    Energy Technology Data Exchange (ETDEWEB)

    Freitag, R.; Hastings, L.; Mercer, W.R.; Smith, A.

    1973-02-01

    Twenty species of ground beetles (Family Carabidae) and one species of carrion beetle (Family Silphidae) were collected in six stations east of a kraft paper mill in Thunder Bay, Ontario, from May to August, 1971. The beetle population decreased markedly towards the mill. There was no apparent statistical difference in size variation of specimens near the mill and those further away.

  17. Researchers' Night: science at the shops

    CERN Multimedia

    Corinne Pralavorio

    2015-01-01

    On 25 September, as part of European Researchers’ Night, CERN and POPScience joined forces to welcome the public at the Balexert shopping centre in Geneva. The Bulletin presents its gallery of photographs from the exciting and educational event.   Science through comic strips, games, cinema and television: POPScience approaches scientific questions through popular culture, with great success! Around 500 children attended the sessions for schools at Balexert's multiplex cinema, and 600 spectators flocked to the public screenings.  Using the big screen, scientists, directors and authors were on hand to disentangle truth from untruths and science from science fiction. The guests, some of whom appeared in person and others via video link, included Jorge Cham, author of PhD Comics and the spin-off film; David Saltzberg, physicist at CMS and scientific consultant for the television series The Big Bang Theory; Kip Thorne, scientific consultant for the film Interstellar; Lawrence ...

  18. Scheduling job shop - A case study

    Science.gov (United States)

    Abas, M.; Abbas, A.; Khan, W. A.

    2016-08-01

    The scheduling in job shop is important for efficient utilization of machines in the manufacturing industry. There are number of algorithms available for scheduling of jobs which depend on machines tools, indirect consumables and jobs which are to be processed. In this paper a case study is presented for scheduling of jobs when parts are treated on available machines. Through time and motion study setup time and operation time are measured as total processing time for variety of products having different manufacturing processes. Based on due dates different level of priority are assigned to the jobs and the jobs are scheduled on the basis of priority. In view of the measured processing time, the times for processing of some new jobs are estimated and for efficient utilization of the machines available an algorithm is proposed and validated.

  19. Events Marketing Model of Dubai Shopping Festival

    Directory of Open Access Journals (Sweden)

    K. Prakash Vel

    2014-12-01

    Full Text Available Cities and places have become major destinations through taking the extra mile of creativity and offering a well-researched package of offerings through systematically planned events. One such leading example in the list of successful festivals that have earned a global reputation due to its uniqueness and creative event offerings is the Dubai Shopping Festival (DSF in the United Arab Emirates. This paper is a case study based description of the internal and external drivers involved in planning and implementing a global event successfully and has captured the various drivers through a structured framework. The analysis serves as a good addition to the existing literature on ‘Events Marketing’. 

  20. The automatic lumber planing mill

    Science.gov (United States)

    Peter Koch

    1957-01-01

    It is probable that a truly automatic planning operation could be devised if some of the variables commonly present in the mill-run lumber were eliminated and the remaining variables kept under close control. This paper will deal with the more general situation faced by mostl umber manufacturing plants. In other words, it will be assumed that the incoming lumber has...

  1. Soil carbon 4 per mille

    NARCIS (Netherlands)

    Mulder, V.L.

    2017-01-01

    The ‘4 per mille Soils for Food Security and Climate’ was launched at the COP21 with an aspiration to increase global soil organic matter stocks by 4 per 1000 (or 0.4 %) per year as a compensation for the global emissions of greenhouse gases by anthropogenic sources. This paper surveyed the soil

  2. Massive Yang-Mills fields

    NARCIS (Netherlands)

    Veltman, M.J.G.; Reiff, J.

    1969-01-01

    Two problems are studied in the paper: (i) the relation between Lagrangian and Feynman rules if the Lagrangian contains derivative couplings and/or vector meson fields and (ii) the behaviour of certain two closed loop diagrams in the perturbation theory of Yang-Mills fields. With respect to ( i ) .

  3. Decision Support for the Rolling Stock Dispatcher

    DEFF Research Database (Denmark)

    Groth, Julie Jespersen

    Real-time recovery is receiving a fast growing interest in an increasingly competitive railway operation market. This thesis considers the area of rolling stock dispatching which is one of the typical real-time railway dispatching problems. All work of the thesis is based on the network...... and planning processes of the railway operator DSB S-tog a/s. In the thesis the problems existing in the railway planning process from the strategic to real-time level are briefly sketched. Network planning, line planning, timetabling, crew and rolling stock planning is outlined and relevant references...... are given. Specifically the thesis references the operation research studies based on the railway operation of DSB S-tog a/s. Subsequently the process of dispatching is outlined with a specific emphasis on rolling stock. The rolling stock recovery problem is the problem of assigning train units to train...

  4. Terras: NATO õppuste roll Euroopas kasvab

    Index Scriptorium Estoniae

    2013-01-01

    Kaitseväe juhataja kindralmajor Riho Terrase sõnul suureneb lähiaastatel NATO õppuste roll Euroopas, sest Afganistanis sõdides saadud kogemust on vaja säilitada ning kasutada seda kollektiivkaitse tugevdamiseks

  5. Disk partition function and oscillatory rolling tachyons

    International Nuclear Information System (INIS)

    Jokela, Niko; Jaervinen, Matti; Keski-Vakkuri, Esko; Majumder, Jaydeep

    2008-01-01

    An exact cubic open string field theory rolling tachyon solution was recently found by Kiermaier et al and Schnabl. This oscillatory solution has been argued to be related by a field redefinition to the simple exponential rolling tachyon deformation of boundary conformal theory. In the latter approach, the disk partition function takes a simple form. Out of curiosity, we compute the disk partition function for an oscillatory tachyon profile, and find that the result is nevertheless almost the same

  6. Methods in Mapping Usability of Malaysia’s Shopping Centre

    Directory of Open Access Journals (Sweden)

    Abdul Ghani Aida Affina

    2016-01-01

    Full Text Available With more than 200 number of shopping centre in Klang Valley itself, we the consumer actually have vast of choices. Instead of the machineries varieties from the lower class product till the posh one, each of those shopping centres eventually offers the typical product same as others. Those shopping centers are competing with each other and in great endeavour to attract more consumers, to visit and spend. As for the visitor, the typical product and boring ambience seems similar in all malls, and is looking something beyond the standard. Something that promising quality embedded in shopping centre which evokes the various emotions of the user along their journey in malls. This quality is known as usability. Usability; as defined generally is a global user’s experience response with product, environment, service or facilities. It is an assessment in extracting the qualities of shopping centre design. In mapping it, there are a few synthesizing methods to implement it. Therefore, this paper purposely to review the method that been used in usability of Malaysia’s shopping centre research with a few references on previous research done in usability assessment by predecessor’s scholars. With the accentuation on three elements that anchoring what the usability is: effectiveness, efficient and satisfaction, it is hope that this overview can lead other researcher in portraying its relationship with the quality and ‘user friendly’ design of shopping centre.

  7. Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

    DEFF Research Database (Denmark)

    De Grave, Arnaud; Hansen, Hans Nørgaard; Andolfatto, Loic

    2009-01-01

    In order to cope with repositioning errors and to combine the fast removal rate of micro milling with the precision and small feature size achievable with micro EDM milling, a hybrid micro-milling and micro-EDM milling centre was built and tested. The aim was to build an affordable set-up, easy...... by micro milling. Examples of test parts are shown and used as an experimental validation....

  8. Maintenance in Railway Rolling Stock Rescheduling for Passenger Railways

    NARCIS (Netherlands)

    J.C. Wagenaar (Joris); L.G. Kroon (Leo)

    2015-01-01

    textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of passenger trains has to be rescheduled in order to maintain a feasible rolling stock circulation. A limited number of rolling

  9. Why do you shop there? A mixed methods study mapping household food shopping patterns onto weekly routines of black women.

    Science.gov (United States)

    DiSantis, Katherine Isselmann; Hillier, Amy; Holaday, Rio; Kumanyika, Shiriki

    2016-01-28

    The effectiveness of initiatives to increase healthy food access may be affected by where people decide to shop. People with poor neighborhood access to large grocery stores develop shopping patterns that require traveling to other areas, and some people who do have neighborhood access also travel elsewhere for food shopping. We sought to gain an understanding of household food shopping patterns in a sample of Black women in terms of where they shopped and why. All food shopping trips of 35 low- or middle/high-income black mothers or caregivers living with at least one child were identified from grocery shopping receipts collected over four consecutive weeks. Food shopping locations were mapped along with locations of participants' homes and other places they visited during weekly routine travels (e.g. work, child's school). Semi-structured individual interviews elicited narrative information about whether and how grocery shopping trips were linked to routine travels. Inductive content analysis was utilized to identify emergent themes from interviews. Themes were considered in relation to geospatial distances and travel patterns identified through mapping of participants' shopping. Participants shopped at an average of six different stores, traveling on average a total of 35 miles (sd = 41) (Euclidian distance) over the four weeks. The most frequented store was within a mile of home (57%) or home or another place visited in the weekly routine for about 77% of participants. Interview results emphasized the concept of convenience which referred to geographical proximity to the home or routine destinations and also to potential to save time because several stores were co-located or because the store layout was easy to navigate and familiar. Store selection also related to mode of transportation, pricing, and family preference for certain foods. People have specific reasons for consistently shopping in areas outside of their neighborhood of residence. Incorporating

  10. Energy benchmarking for shopping centers in Gulf Coast region

    International Nuclear Information System (INIS)

    Juaidi, Adel; AlFaris, Fadi; Montoya, Francisco G.; Manzano-Agugliaro, Francisco

    2016-01-01

    Building sector consumes a significant amount of energy worldwide (up to 40% of the total global energy); moreover, by the year 2030 the consumption is expected to increase by 50%. One of the reasons is that the performance of buildings and its components degrade over the years. In recent years, energy benchmarking for government office buildings, large scale public buildings and large commercial buildings is one of the key energy saving projects for promoting the development of building energy efficiency and sustainable energy savings in Gulf Cooperation Council (GCC) countries. Benchmarking would increase the purchase of energy efficient equipment, reducing energy bills, CO_2 emissions and conventional air pollution. This paper focuses on energy benchmarking for shopping centers in Gulf Coast Region. In addition, this paper will analyze a sample of shopping centers data in Gulf Coast Region (Dubai, Ajman, Sharjah, Oman and Bahrain). It aims to develop a benchmark for these shopping centers by highlighting the status of energy consumption performance. This research will support the sustainability movement in Gulf area through classifying the shopping centers into: Poor, Usual and Best Practices in terms of energy efficiency. According to the benchmarking analysis in this paper, the shopping centers best energy management practices in the Gulf Coast Region are the buildings that consume less than 810 kW h/m"2/yr, whereas the poor building practices are the centers that consume greater than 1439 kW h/m"2/yr. The conclusions of this work can be used as a reference for shopping centres benchmarking with similar climate. - Highlights: •The energy consumption data of shopping centers in Gulf Coast Region were gathered. •A benchmarking of energy consumption for the public areas for the shopping centers in the Gulf Coast Region was developed. •The shopping centers have the usual practice in the region between 810 kW h/m"2/yr and 1439 kW h/m"2/yr.

  11. Vape shops: who uses them and what do they do?

    Science.gov (United States)

    Pattinson, Julie; Lewis, Sarah; Bains, Manpreet; Britton, John; Langley, Tessa

    2018-04-23

    'Vape shops' are a popular source for buying electronic cigarettes (e-cigarettes) and related products. The products that vape shops sell, their marketing techniques and the extent to which they provide information or encouragement to smokers to quit tobacco use, as well as the patterns of tobacco and e-cigarette use of their customers are not well understood. We conducted cross-sectional surveys in vape shops in the East Midlands region of the United Kingdom, one with shop staff (n = 41), and one with customers (n = 197). The majority of customers (84%) currently used e-cigarettes. Among current vapers, 19% were dual users and 78% had quit smoking. Over half of vapers reported using a lower level of nicotine in their current e-liquid than when they started using e-cigarettes. There was a wide variety in products and price ranges between the shops. Many staff reported that customers ask for information about quitting smoking (90%). Less than half reported providing smoking cessation advice, although 76% of staff reported feeling confident about delivering cessation advice to customers who ask for it. Just under half of customers and shop staff said they thought it was appropriate to deliver formal in-store smoking cessation support. The majority of vape shop customers are vapers who have quit smoking. Shop staff play a central role in providing customers with product information, and many provide smoking cessation advice. Further research is needed to investigate the potential for smoking cessation interventions in vape shops, including the extent to which these would appeal to non-vapers.

  12. E-COMMERCE FACTORS INFLUENCING CONSUMERS‘ ONLINE SHOPPING DECISION

    Directory of Open Access Journals (Sweden)

    Živilė Baubonienė

    2015-12-01

    Full Text Available Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the benefits received by buyers making purchases online. Specifically, the research explores how online shopping can be affected by such factors as age, gender or occupation. Design/methodology/approach – The factors that affect the consumer online shopping have been disclosed through quantitative research by analysing data collected via a web‐based questionnaire survey. The sample consisted of 183 Lithuanian consumers who were purchasing online. Findings –The empirical findings of this study indicate that the main factors influencing consumers to shop online are convenience, simplicity and better price. Analysis of socio-demographical characteristics such as gender has shown that men shop more often online because of the lower price. Respondents of the 25–35 year age group more often choose shopping online for such reasons as lack of time and a wide range of products. The most beneficial factor of shopping online was identified as a possibility to compare prices and buy at a lower price. Research limitations/implications – This study was done regarding only general conditions and the findings may not necessarily be applicable to a particular e-business. Therefore, in the future it would be highly encouraged to examine consumers’ attitudes towards specialized online shopping websites to look for differences by kind of products or services.Practical implications – Attributes identified by this study could help e-business developers to forme their

  13. Job shop scheduling with makespan objective: A heuristic approach

    Directory of Open Access Journals (Sweden)

    Mohsen Ziaee

    2014-04-01

    Full Text Available Job shop has been considered as one of the most challenging scheduling problems and there are literally tremendous efforts on reducing the complexity of solution procedure for solving job shop problem. This paper presents a heuristic method to minimize makespan for different jobs in a job shop scheduling. The proposed model is based on a constructive procedure to obtain good quality schedules, very quickly. The performance of the proposed model of this paper is examined on standard benchmarks from the literature in order to evaluate its performance. Computational results show that, despite its simplicity, the proposed heuristic is computationally efficient and practical approach for the problem.

  14. E-Commerce Performance. Shopping Cart Key Performance Indicators

    Directory of Open Access Journals (Sweden)

    Mihaela I. MUNTEAN

    2016-01-01

    Full Text Available In an e-commerce performance framework is important to identify the key performance indicators that measure success and together provide the greatest context into the business perfor-mance. Shopping carts are an essential part of ecommerce, a minimal set of key performance indicators being the subject of our debate. The theoretical approach is sustained by a case study, an e-shop implemented using PHP and MySQL, for simulating main business processes within the considered performance framework. Our approach opens a perspective for future research using additional indicators in order to properly evaluate the global performance of any e-shop.

  15. SHOP: scaffold hopping by GRID-based similarity searches

    DEFF Research Database (Denmark)

    Bergmann, Rikke; Linusson, Anna; Zamora, Ismael

    2007-01-01

    A new GRID-based method for scaffold hopping (SHOP) is presented. In a fully automatic manner, scaffolds were identified in a database based on three types of 3D-descriptors. SHOP's ability to recover scaffolds was assessed and validated by searching a database spiked with fragments of known...... scaffolds were in the 31 top-ranked scaffolds. SHOP also identified new scaffolds with substantially different chemotypes from the queries. Docking analysis indicated that the new scaffolds would have similar binding modes to those of the respective query scaffolds observed in X-ray structures...

  16. Online Infrastructure in Supply Chain for Hardware Shops

    OpenAIRE

    Sørensen , Karl ,

    2014-01-01

    Part 4: Private Services; International audience; This article describes how the Scandinavian network communication system DATEX was used to build an online infrastructure in a retail chain of privately owned hardware shops and Do-It-Yourself (DIY) centers. The solution gave the staff in the shops the possibility to use EDP as early as in 1983. The Internet did not exist at the time. EDP was not part of the daily work in the shop and was for most employees something unknown that took place at...

  17. NON-FUNCTIONAL SHOPPING MOTIVES AMONG IRANIAN CONSUMERS

    Directory of Open Access Journals (Sweden)

    Shahriar AZIZI

    2011-01-01

    Full Text Available This study aims to explore the non functional shopping motives among Iranian consumers. In addition, the effects of marital status, gender, age and residential region as an indicator for social class on the non-functional shopping motives are investigated. This paper uses a self-reported and 15 items questionnaire. The analysis is done based on 363 returned and usable questionnaires. Multivariate analysis of variance is applied for this study. MANOVA results show that marital status, gender, age and region have different significant effects on the non-functional shopping motives among Iranian consumers.

  18. Yang-Mills gravity in biconformal space

    International Nuclear Information System (INIS)

    Anderson, Lara B; Wheeler, James T

    2007-01-01

    We write a gravity theory with Yang-Mills-type action using the biconformal gauging of the conformal group. We show that the resulting biconformal Yang-Mills gravity theories describe 4-dim, scale-invariant general relativity in the case of slowly changing fields. In addition, we systematically extend arbitrary 4-dim Yang-Mills theories to biconformal space, providing a new arena for studying flat-space Yang-Mills theories. By applying the biconformal extension to a 4-dim pure Yang-Mills theory with conformal symmetry, we establish a 1-1, onto mapping between a set of gravitational gauge theories and 4-dim, flat-space gauge theories

  19. Properties of the AZ31 Magnesium Alloy Round Bars Obtained in Different Rolling Processes / Własności Prętów Okrągłych Ze Stopu Magnezu AZ31 Otrzymanych W Różnych Procesach Walcowania

    Directory of Open Access Journals (Sweden)

    Stefanik A.

    2015-12-01

    Full Text Available Currently magnesium alloy bars are manufactured mainly in the extrusion process. This method has some drawbacks, which include: low process capacity, considerable energy demand, small length of finished products. Therefore it is purposeful to develop efficient methods for manufacturing of Mg alloy products in the form of bars, such methods include groove rolling and three-high skew rolling processes. Modified stretching passes provide change in material plastic flow, which contributes to the occurrence of the better distribution of stress and strain state than in the case of rolling in classical stretching passes. One of the modern method of Mg alloy bars production is rolling in a three-high skew rolling mill, which allows to set in a single pass a larger deformation compared to the rolling in the stretching passes.

  20. Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules

    DEFF Research Database (Denmark)

    Benatto, Gisele Alves dos Reis; Roth, Bérenger; Corazza, Michael

    2016-01-01

    We report the use of roll-to-roll printed silver nanowire networks as front electrodes for fully roll-to-roll processed flexible indium-tin-oxide (ITO) free OPV modules. We prepared devices with two types of back electrodes, a simple PEDOT:PSS back electrode and a PEDOT:PSS back electrode...

  1. 75 FR 42782 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

    Science.gov (United States)

    2010-07-22

    ...)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United... Brazil and Japan, and the suspended investigation on hot-rolled steel from Russia. SUMMARY: The... Japan, and the suspended investigation on hot-rolled steel from Russia would be likely to lead to...

  2. 75 FR 62566 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

    Science.gov (United States)

    2010-10-12

    ...)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United... antidumping duty investigation on hot-rolled steel from Russia. SUMMARY: The Commission hereby gives notice of... suspended investigation on hot-rolled steel from Russia would be likely to lead to continuation or...

  3. Towards an understanding of Internet-based problem shopping behaviour: The concept of online shopping addiction and its proposed predictors.

    Science.gov (United States)

    Rose, Susan; Dhandayudham, Arun

    2014-06-01

    Compulsive and addictive forms of consumption and buying behaviour have been researched in both business and medical literature. Shopping enabled via the Internet now introduces new features to the shopping experience that translate to positive benefits for the shopper. Evidence now suggests that this new shopping experience may lead to problematic online shopping behaviour. This paper provides a theoretical review of the literature relevant to online shopping addiction (OSA). Based on this selective review, a conceptual model of OSA is presented. The selective review of the literature draws on searches within databases relevant to both clinical and consumer behaviour literature including EBSCO, ABI Pro-Quest, Web of Science - Social Citations Index, Medline, PsycINFO and Pubmed. The article reviews current thinking on problematic, and specifically addictive, behaviour in relation to online shopping. The review of the literature enables the extension of existing knowledge into the Internet-context. A conceptual model of OSA is developed with theoretical support provided for the inclusion of 7 predictor variables: low self-esteem, low self-regulation; negative emotional state; enjoyment; female gender; social anonymity and cognitive overload. The construct of OSA is defined and six component criteria of OSA are proposed based on established technological addiction criteria. Current Internet-based shopping experiences may trigger problematic behaviours which can be classified on a spectrum which at the extreme end incorporates OSA. The development of a conceptual model provides a basis for the future measurement and testing of proposed predictor variables and the outcome variable OSA.

  4. Influence of milling process on efavirenz solubility

    Directory of Open Access Journals (Sweden)

    Erizal Zaini

    2017-01-01

    Full Text Available Introduction: The aim of this study was to investigate the influence of the milling process on the solubility of efavirenz. Materials and Methods: Milling process was done using Nanomilling for 30, 60, and 180 min. Intact and milled efavirenz were characterized by powder X-ray diffraction, scanning electron microscopy (SEM, spectroscopy infrared (IR, differential scanning calorimetry (DSC, and solubility test. Results: The X-ray diffractogram showed a decline on peak intensity of milled efavirenz compared to intact efavirenz. The SEM graph depicted the change from crystalline to amorphous habit after milling process. The IR spectrum showed there was no difference between intact and milled efavirenz. Thermal analysis which performed by DSC showed a reduction on endothermic peak after milling process which related to decreasing of crystallinity. Solubility test of intact and milled efavirenz was conducted in distilled water free CO2with 0.25% sodium lauryl sulfate media and measured using high-performance liquid chromatography method with acetonitrile: distilled water (80:20 as mobile phases. The solubility was significantly increased (P < 0.05 after milling processes, which the intact efavirenz was 27.12 ± 2.05, while the milled efavirenz for 30, 60, and 180 min were 75.53 ± 1.59, 82.34 ± 1.23, and 104.75 ± 0.96 μg/mL, respectively. Conclusions: Based on the results, the solubility of efavirenz improved after milling process.

  5. Determination of rational parameters for process of grinding materials pre-crushed by pressure in ball mill

    Science.gov (United States)

    Romanovich, A. A.; Romanovich, L. G.; Chekhovskoy, E. I.

    2018-03-01

    The article presents the results of experimental studies on the grinding process of a clinker preliminarily ground in press roller mills in a ball mill equipped with energy exchange devices. The authors studied the influence of the coefficients of loading for grinding bodies of the first and second mill chambers, their lengths, angles of inclination, and the mutual location of energy exchange devices (the ellipse segment and the double-acting blade) on the output parameters of the grinding process (productivity, drive power consumption and specific energy consumption). It is clarified that the best results of the disaggregation and grinding process, judging by the minimum specific energy consumption in the grinding of clinker with an anisotropic texture after force deformation between the rolls of a press roller shredder, are achieved at a certain angle of ellipse segment inclination; the length of the first chamber and the coefficients of loading the chambers with grinding bodies.

  6. Research and Development Trend of Shape Control for Cold Rolling Strip

    Science.gov (United States)

    Wang, Dong-Cheng; Liu, Hong-Min; Liu, Jun

    2017-09-01

    Shape is an important quality index of cold rolling strip. Up to now, many problems in the shape control domain have not been solved satisfactorily, and a review on the research progress in the shape control domain can help to seek new breakthrough directions. In the past 10 years, researches and applications of shape control models, shape control means, shape detection technology, and shape control system have achieved significant progress. In the aspect of shape control models, the researches in the past improve the accuracy, speed and robustness of the models. The intelligentization of shape control models should be strengthened in the future. In the aspect of the shape control means, the researches in the past focus on the roll optimization, mill type selection, process optimization, local strip shape control, edge drop control, and so on. In the future, more attention should be paid to the coordination control of both strip shape and other quality indexes, and the refinement of control objective should be strengthened. In the aspects of shape detection technology and shape control system, some new types of shape detection meters and shape control systems are developed and have successfully industrial applications. In the future, the standardization of shape detection technology and shape control system should be promoted to solve the problem of compatibility. In general, the four expected development trends of shape control for cold rolling strip in the future are intelligentization, coordination, refinement, and standardization. The proposed research provides new breakthrough directions for improving shape quality.

  7. Preorganization of Nanostructured Inks for Roll-to-Roll-Coated Polymer Solar Cells

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Senkovskyy, Volodymyr; Kiriy, Anton

    2010-01-01

    , a preorganized ink was obtained that was used to make polymer solar cell modules in a full roll-to-roll coating and printing process operating in ambient air. The polymer solar cells were thus prepared by a mixture of slot die and flat-bed screen printing. Various polymer solar cell modules were prepared ranging...

  8. Technology development for roll-to-roll production of organic photovoltaics

    NARCIS (Netherlands)

    Galagan, Y.O.; Vries, I.G. de; Langen, A.P.; Andriessen, H.A.J.M.; Verhees, W.J.H.; Veenstra, S.C.; Kroon, J.M.

    2011-01-01

    In order to reach the objective of low-cost, large area organic photovoltaic systems, we build up a knowledge base concerning the influence of process conditions on the performance of polymer solar cells. A large area solar cell module, with roll-to-roll coated PEDOT:PSS and photoactive layers

  9. Material-Process-Performance Relationships for Roll-to-Roll Coated PEM Electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Mauger, Scott; Neyerlin, K.C.; Stickel, Jonathan; Ulsh, Michael; More, Karren; Wood, David

    2017-04-26

    Roll-to-roll (R2R) coating is the most economical and highest throughput method for producing fuel cell electrodes. R2R coating encompasses many different methodologies to create uniform films on a moving web substrate. Here we explore two coating methods, gravure and slot die, to understand the impacts of each on film uniformity and performance.

  10. Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

    NARCIS (Netherlands)

    Rentrop, C.; Rubingh, J.E.J.M.; Lelieveld, R.; Sandberg, H.

    2014-01-01

    The ROPAS project (Roll-to-roll paper sensors) combines high end electronics and wireless sensors with low cost paper substrates and processing techniques that can be applied on a large scale. Paper is the next step in the printed electronics roadmap of utilising cheaper substrate materials as a

  11. A Coupled Model for Work Roll Thermal Contour with Subsectional Cooling in Aluminum Strip Cold Rolling

    Directory of Open Access Journals (Sweden)

    Shao Jian

    2014-10-01

    Full Text Available Little attention had been given to the evaluation of subsectional cooling control ability under complicated working conditions. In this paper, heat generation was calculated by using finite difference method. Strip hardening, work roll elastic deformation and elastic recovery of strip were taken into account. The mean coefficient of convective heat transfer on work roll surface was simulated by FLUENT. Calculation model had used the alternative finite difference scheme, which improved the model stability and computing speed. The simulation result shows that subsectional cooling control ability is different between different rolling passes. Positive and negative control abilities are roughly the same in the same pass. The increase of rolled length, working pressure of header and friction coefficient has positive effect on subsectional cooling control ability, and the rolling speed is on the contrary. On the beginning of the pass, when work roll surface has not reached the stable temperature, control ability of subsectional cooling is mainly affected by rolled length. The effect of mean coefficient of convective heat transfer and coefficient of friction is linear. When rolling speed is over 500 m/min, control ability of subsectional cooling becomes stable.

  12. PERSEPSI MANFAAT DAN RISIKO DALAM PERILAKU PEMBELIAN KONSUMEN ONLINE SHOP

    Directory of Open Access Journals (Sweden)

    Lilik Noor Yuliati

    2011-08-01

    Full Text Available  This study was to analyze lifestyle, perceived risks, perceived benefits, online searching, evaluation of information, and consumer purchasing behavior in online shop. Online shop election conducted purposively, that was facebook, kaskus, and online shop community. The study included 145 consumers. Data analysis was performed by descriptive, different test, and regression test. The results showed that perceived risks, evaluation of information, and online shopping expenditure among groups that worked and didn’t work differ significantly. Consumers had lifestyle in moderate category, perceived risk in risk category, neutral perceived benefits, and low online searching. Perceived benefits was influenced by gender, age, occupation, income, and lifestyle, while the perceived risks was influenced by work and lifestyle. Online search influenced by gender, while evaluation of information was influenced by gender, perceived benefits, and perceived risks. Fashion product buying behavior was influenced by gender, age, occupation, lifestyle, perceived benefits, online searching, and evaluation of information.

  13. Open|SpeedShop Graphical User Interface Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to create a new graphical user interface (GUI) for an existing parallel application performance and profiling tool, Open|SpeedShop. The current GUI has...

  14. Teaching E-Commerce by Shopping Only Online.

    Science.gov (United States)

    Mangan, Catherine S.

    2000-01-01

    Describes the experiences of Bruce D. Weinberg, an assistant professor of marketing at Boston University (Massachusetts), who is doing all his shopping via the Internet to demonstrate to students what works and what fails when selling in cyberspace. (DB)

  15. Environmental Assessment. Moanalua Shopping Center Redevelopment Oahu, Hawaii

    National Research Council Canada - National Science Library

    Pingree, Ryan; Halperin, William

    2004-01-01

    The Department of the Navy has prepared an Environmental Assessment (EA) and determined that an Environmental Impact Statement is not required for the redevelopment of the Moanalua Shopping Center (MSC) Oahu Hawaii...

  16. Consumer's Online Shopping Influence Factors and Decision-Making Model

    Science.gov (United States)

    Yan, Xiangbin; Dai, Shiliang

    Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

  17. Apparel shopping behavior of elderly men and women.

    Science.gov (United States)

    Chowdhary, U

    1989-06-01

    70 interested elderly (65 yr. and over) men and women participated in an investigation of older consumers' apparel-shopping behavior and satisfactions and dissatisfactions with available clothing and facilities. Analysis showed that the participants considered shopping ease, wide variety, and label/brand as some of the important factors while shopping for clothes. The respondents were satisfied with good selection, closeness of the mall, and reasonable sales. However, their dissatisfactions ranged from service to fit and size, youthful styles, and abundance of imported clothing. In-store displays, mail order catalogs, and window shopping were the most commonly used sources of apparel information. Several implications of the findings were discussed and suggestions for further research were made.

  18. EFFECT OF V C NCY ON SHOPPING CENTRES' INVESTMENT ...

    African Journals Online (AJOL)

    USER

    2015-01-12

    Jan 12, 2015 ... The paper examined the effect of vacancy rate on the rental returns of shopping centres ... the risk of rents not increasing appreciably ... relationship between vacancy rates and rent ... costs, heterogeneity of the housing stock,.

  19. Planning continuity and the actual conditions of shopping malls.

    Science.gov (United States)

    Morita, Yoshitsugu; Tahara, Manabu

    2004-11-01

    The main purpose of this study is to investigate the continuity of the planning of shopping malls in downtown areas of Japan and to look into the tendencies of the current existing malls until today. This paper is a summary of a survey conducted on the actual conditions of current shopping malls and a questionnaire administered to local governments in the survey areas. The results of this study allow us to summarize the reasons for and changes caused by renewal efforts directed toward the streets, public spaces, and urban elements (pavement, bench, streetlight, arcade, sculpture, etc.) in shopping malls. Furthermore, these results also help us to understand the scale of the renewal efforts as well as their timing in relation to when the shopping mall was originally constructed.

  20. PULPA CUBA MILL ENERGY ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Juan Pedro Hernández Touset

    2015-10-01

    Full Text Available An energy study was performed at Pulpa Cuba Paper Mill, located in Sancti Spiritus, where an energy management system was applied according to NC: ISO 50001, in order to assess the energy system by applying energy management systems for energy and water reduction in the paper mill, in which the current steam generation, distribution and consumption system is diagnosed. The proposal of a modified energy scheme with 1 MW Backpressure Steam Turbine Generator and rehabilitation of the original boiler or installing a lower capacity boiler contributes to save financial resources by the concept of water, fuel and electricity. The implementation of four projects will save 3,095,574 CUC / y and an average payback period of about 1 year is expected.

  1. Influences of rolling method on deformation force in cold roll-beating forming process

    Science.gov (United States)

    Su, Yongxiang; Cui, Fengkui; Liang, Xiaoming; Li, Yan

    2018-03-01

    In process, the research object, the gear rack was selected to study the influence law of rolling method on the deformation force. By the mean of the cold roll forming finite element simulation, the variation regularity of radial and tangential deformation was analysed under different rolling methods. The variation of deformation force of the complete forming racks and the single roll during the steady state under different rolling modes was analyzed. The results show: when upbeating and down beating, radial single point average force is similar, the tangential single point average force gap is bigger, the gap of tangential single point average force is relatively large. Add itionally, the tangential force at the time of direct beating is large, and the dire ction is opposite with down beating. With directly beating, deformation force loading fast and uninstall slow. Correspondingly, with down beating, deformat ion force loading slow and uninstall fast.

  2. CERN Shop - Christmas Sale on 13 and 14 December

    CERN Multimedia

    2006-01-01

    Looking for Christmas present ideas? As every year, we will be running a CERN Shop Stand in the Main Building, ground floor, on Wednesday 13 and on Thursday 14 December from 10.30 to 16.00. Some new articles will be on sale and special reductions are given for some articles. Come and visit the CERN Shop Stand and find your Christmas presents. DSU-CO group

  3. Social Media, Online Shopping Activities and Perceived Risks in Malaysia

    OpenAIRE

    Majid, M.; Firend, A.R

    2017-01-01

    The Internet shopping experience offers dissimilar ways of off-online communications with communication differences tools that need a better decision of their effect on customer communications. Social networking sites is also fast becoming the platform for interaction, attracting new potential customers and has become the trend for companies to engage with their consumers online. The main objective of this research is to examine Malaysia customer’s risk perception toward online shopping via s...

  4. A Shopping Mall Multiagent System: Ambient Intelligence in Practice.

    OpenAIRE

    Bajo Pérez, Javier; González Arrieta, Angélica; de Luis Reboredo, Ana; Saavedra, A.; Corchado Rodríguez, Juan M.

    2006-01-01

    This paper presents a multiagent model that facilitates aspects of shopping mall management, as well as increasing the quality of leisure facilities and shopping on offer. The work presented focuses on the use of a multi agent architecture, based on the use of deliberative agents that incorporates casebased planning. The architecture considers a dynamic framework that facilitates user’s interactions. The architecture incorporates agents whose aim is to acquire knowledge and adapt themselves t...

  5. ShopGirls Shine in Eco-Marathon

    Science.gov (United States)

    Stowell, Shante

    2011-01-01

    The ShopGirls of Granite Falls (WA) High School are the first-ever all-female team to successfully design, build, and race a prototype diesel car in the Shell Eco-marathon. The team took first place in the diesel fuel-efficiency category with a vehicle that achieved 470 miles per gallon! The idea for the ShopGirls came when Vervia Gabriel, career…

  6. Customer satisfaction with individual shopping trip experiences in grocery retailing

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Grunert, Klaus G; Jensen, Birger Boutrup

    , whereas hedonic value reflects the potential entertainment and emotional worth associated with the shopping trip. Recognising this duality, in addition to enabling customers to satisfy utilitarian needs related to product-acquisition, grocery retailers increasingly try to offer customers pleasurable...... shopping experiences, even to entertain them. Because there is evidence suggesting even satisfied customers sometimes switch brands and retailers due to boredom, it is important for retailers to continuously engage consumers and stir interest in a given store. Satisfying customers again and again...

  7. Visualization of the sequence of a couple splitting outside shop

    DEFF Research Database (Denmark)

    2015-01-01

    Visualization of tracks of couple walking together before splitting and one goes into shop the other waits outside. The visualization represents the sequence described in figure 7 in the publication 'Taking the temperature of pedestrian movement in public spaces'......Visualization of tracks of couple walking together before splitting and one goes into shop the other waits outside. The visualization represents the sequence described in figure 7 in the publication 'Taking the temperature of pedestrian movement in public spaces'...

  8. LinkShop v.1.0.0

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-15

    LinkShop is a software tool for applying the method of Linkography to the analysis time-sequence data. LinkShop provides command line, web, and application programming interfaces (API) for input and processing of time-sequence data, abstraction models, and ontologies. The software creates graph representations of the abstraction model, ontology, and derived linkograph. Finally, the tool allows the user to perform statistical measurements of the linkograph and refine the ontology through direct manipulation of the linkograph.

  9. Mill Glaze: Myth or Reality?

    Science.gov (United States)

    Mark Knaebe

    2013-01-01

    Since the mid-1980s, a condition called “mill glaze” (also called planer’s glaze) has sometimes been blamed for the failure of a coating on smooth flat-grained siding and some other wood products. The exact cause of this problem has been a subject of controversy. Many people believe that the coating fails as a result of the planing and/or drying processes. They...

  10. A morphological evaluation of a duplex stainless steel processed by high energy Ball Mill

    International Nuclear Information System (INIS)

    Yonekubo, Ariane Emi; Cintho, Osvaldo Mitsuyuki; Aguiar, Denilson Jose Marcolino de; Capocchi, Jose Deodoro Trani

    2009-01-01

    The duplex stainless steels are formed by a ferrite and austenite mixture, giving them a combination of properties. Commercially, these steels are hot rolled, developing an anisotropic, alternated ferrite and austenite elongated lamellae microstructure. In this work, a duplex stainless steel was produced by the mixture of elementary powders with the composition Fe-19.5Cr-5Ni processed in an ATTRITOR ball mill during periods up to 15 hours. The powders obtained were compressed in specimens and were heat treated in the temperatures of 900, 1050 and 1200 °C during 1 hour and analysed by x ray diffraction, optic microscopy, scanning electron microscopy and energy dispersion spectroscopy. An optimized microstructure with ultrafine, equiaxial and regular duplex microstructure was obtained in the 15 hour milling and 1200 °C heat treatment. Afterwards, a commercially super duplex stainless steel UNS S32520 was aged at 800 °C aiming the precipitation of σ phase in order to reduce its toughness and then, milled in SPEX mill. The resulting microstructure was a very fine duplex type with irregular grain boundary morphology duo to the grain growth barrier promoted by the renascent σ phase particles during sintering process. (author)

  11. The role of food shopping in later life.

    Science.gov (United States)

    Pettigrew, Simone; Worrall, Caitlin; Biagioni, Nicole; Talati, Zenobia; Jongenelis, Michelle

    2017-04-01

    By the time they reach retirement, individuals are typically highly experienced in sourcing food products and they have strong familiarity with food retailing environments. To investigate the ongoing role of food shopping in later life, the present study explored seniors' attitudes to food shopping and their food-selection behaviours through the lens of their broader lifestyles. The aim was to provide insights of relevance to the development of future efforts to optimise seniors' food shopping experiences and nutrition-related outcomes. Interviews were conducted with 75 Western Australians aged 60 + years to discuss food shopping in the context of their day-to-day lives. The sample was comprised mainly of women (n = 64) and the average age was 74 years. In general, food shopping was perceived to be a manageable but mundane part of life. The findings suggest that there has been an improvement in food retailing practices because many of the numerous areas of concern identified in previous research conducted in this geographical location a decade ago were not nominated as relevant by the interviewees. Instead, food-related issues reported to be most problematic included the difficulties associated with sourcing affordable food products that had been produced locally and that did not contain unacceptable food additives. Seniors' food shopping concerns thus appear to have changed from functional aspects of the physical store environment to product attributes that reflect the increasing industrialisation of the food industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Cue reactivity towards shopping cues in female participants.

    Science.gov (United States)

    Starcke, Katrin; Schlereth, Berenike; Domass, Debora; Schöler, Tobias; Brand, Matthias

    2013-03-01

    Background and aims It is currently under debate whether pathological buying can be considered as a behavioural addiction. Addictions have often been investigated with cue-reactivity paradigms to assess subjective, physiological and neural craving reactions. The current study aims at testing whether cue reactivity towards shopping cues is related to pathological buying tendencies. Methods A sample of 66 non-clinical female participants rated shopping related pictures concerning valence, arousal, and subjective craving. In a subgroup of 26 participants, electrodermal reactions towards those pictures were additionally assessed. Furthermore, all participants were screened concerning pathological buying tendencies and baseline craving for shopping. Results Results indicate a relationship between the subjective ratings of the shopping cues and pathological buying tendencies, even if baseline craving for shopping was controlled for. Electrodermal reactions were partly related to the subjective ratings of the cues. Conclusions Cue reactivity may be a potential correlate of pathological buying tendencies. Thus, pathological buying may be accompanied by craving reactions towards shopping cues. Results support the assumption that pathological buying can be considered as a behavioural addiction. From a methodological point of view, results support the view that the cue-reactivity paradigm is suited for the investigation of craving reactions in pathological buying and future studies should implement this paradigm in clinical samples.

  13. Magnon inflation: slow roll with steep potentials

    Energy Technology Data Exchange (ETDEWEB)

    Adshead, Peter [Department of Physics, University of Illinois at Urbana-Champaign,Urbana, IL 61801 (United States); Blas, Diego [Theoretical Physics Department, CERN,CH-1211 Geneva 23 (Switzerland); Burgess, C.P.; Hayman, Peter [Physics & Astronomy, McMaster University,Hamilton, ON, L8S 4M1 (Canada); Perimeter Institute for Theoretical Physics, Waterloo, Ontario N2L 2Y5 (Canada); Patil, Subodh P. [Department of Theoretical Physics, University of Geneva,24 Quai Ansermet, Geneva, CH-1211 (Switzerland)

    2016-11-04

    We find multi-scalar effective field theories (EFTs) that can achieve a slow inflationary roll despite having a scalar potential that does not satisfy G{sup ab}∂{sub a}V∂{sub b}V≪V{sup 2}/M{sub p}{sup 2} (where G{sub ab} is the target-space metric). They evade the usual slow-roll conditions on V because their kinetic energies are dominated by single-derivative terms rather than the usual two-derivative terms. Single derivatives dominate during slow roll and so do not require a breakdown of the usual derivative expansion that underpins calculational control in much of cosmology. The presence of such terms requires some sort of UV Lorentz-symmetry breaking during inflation (besides the usual cosmological breaking). Chromo-natural inflation provides one particular example of a UV theory that can generate the multi-field single-derivative terms we consider, and we argue that the EFT we find indeed captures the slow-roll conditions for its background evolution. We also show that our EFT can be understood as a multi-field generalization of the single-field Cuscuton models. The multi-field case introduces a new feature, however: the scalar kinetic terms define a target-space 2-form, F{sub ab}, whose antisymmetry gives new ways for slow roll to be achieved.

  14. Magnon Inflation: Slow Roll with Steep Potentials

    CERN Document Server

    Adshead, Peter; Burgess, C P; Hayman, Peter; Patil, Subodh P

    2016-01-01

    We find multi-scalar effective field theories (EFTs) that can achieve a slow inflationary roll despite having a scalar potential that does not satisfy the usual slow-roll condition (d V)^2 << V^2/Mp^2. They evade the usual slow-roll conditions on $V$ because their kinetic energies are dominated by single-derivative terms rather than the usual two-derivative terms. Single derivatives dominate during slow roll and so do not require a breakdown of the usual derivative expansion that underpins calculational control in much of cosmology. The presence of such terms requires some sort of UV Lorentz-symmetry breaking during inflation (besides the usual cosmological breaking). Chromo-natural inflation provides an example of a UV theory that can generate the multi-field single-derivative terms we consider, and we argue that the EFT we find indeed captures the slow-roll conditions for the background evolution for Chromo-natural inflation. We also show that our EFT can be understood as a multi-field generalization ...

  15. Investigating Meat Milling Business in Yogyakarta: a Maqâshid al-Syarî‘ah Perspectives

    Directory of Open Access Journals (Sweden)

    Zein Muttaqin

    2017-12-01

    Full Text Available Investigating Meat Milling Business in Yogyakarta: A Maqâshid al-Syarî‘ah Perspectives. This article aims to investigate the meat milling business process in the light of maqâshid al-syarî‘ah perspectives. The ttopic arises due to some past cases related to the mixed process of meat milling of lawful and unlawful meat in the industry, while the demand on the meat milling business is pretty high according to the BAPPENAS Yogyakarta data. Lacking on supervision has threatened consumer protection and deviates from the sharia injunctions. Maqâshid al-syarî‘ah being consider as the basis of sharia compliances that serves to understand the purposes of sharia laws in the daily life in the form of prohibitions and injunctions. Qualitative method and content analysis is conducted to interpret 7 meats milling local shop owner responds regards the manifestation of maqâshid al-syarî‘ah in their business. It can be concluded that the implementation of maqâshid al-syarî‘ah of meat milling business in Yogyakarta on the level of input, process and output has been implemented accordingly. Although there are several cases of respondent that did not abide by the Islamic laws, but most of the businessman are. Halal logistic and supply chain is needed to become the insurance party of the legal aspect of business and also as the milestone of expanding the local meat milling to compete with the bigger competitor such as supermarket.

  16. Autonomous Supervision and Control of Parametric Roll Resonance

    DEFF Research Database (Denmark)

    Galeazzi, Roberto

    therefore two objectives. The first is to develop methods for detection of the inception of parametric roll resonance. The second is to develop control strategies to stabilize the motion after parametric roll has started. Stabilisation of parametric roll resonance points to two possible courses of action...... strategies are then combined to stabilise parametric roll resonance within few roll cycles. Limitations on the maximum stabilisable roll angle are analysed and linked to the ii slew rate saturation and hydrodynamic stall characteristics of the fin stabilisers. The study on maximum stabilisable roll angle...... leads to the requirements for early detection. Two novel detectors are proposed, which work within a shorttime prediction horizon, and issue early warnings of parametric roll inception within few roll cycles from its onset. The main idea behind these detection schemes is that of exploiting the link...

  17. ARTIFICIAL INTELLIGENCE EFFECTIVENESS IN JOB SHOP ENVIRONMENTS

    Directory of Open Access Journals (Sweden)

    OMAR CASTRILLON

    2011-01-01

    Full Text Available El objetivo del presente trabajo, es definir una nueva metodología la cual permita comparar la efectividad de algunas de las principales técnicas de inteligencia artificial (aleatorias, búsqueda tabú, minería de datos, algoritmos evolutivos. Esta metodología es aplicada en los procesos de secuenciación de la producción en ambientes job shop, en un problema con N pedidos y M máquinas, donde cada uno de los pedidos debe pasar por todas las máquinas sin importar el orden. Estas técnicas son medidas en las variables tiempo total de proceso, tiempo total muerto y porcentaje de utilización de las máquinas. Inicialmente, una revisión teórica fue realizada, esta muestra la utilidad y efectividad de la inteligencia artificial en los procesos de secuenciación de la producción. Posteriormente y con base en la experimentación planteada, los resultados obtenidos, muestran que estas técnicas presentan una efectividad superior al 95%, con un intervalo de confiabilidad del 99.5% medido en las variables objeto de estudio.

  18. Assessing product image quality for online shopping

    Science.gov (United States)

    Goswami, Anjan; Chung, Sung H.; Chittar, Naren; Islam, Atiq

    2012-01-01

    Assessing product-image quality is important in the context of online shopping. A high quality image that conveys more information about a product can boost the buyer's confidence and can get more attention. However, the notion of image quality for product-images is not the same as that in other domains. The perception of quality of product-images depends not only on various photographic quality features but also on various high level features such as clarity of the foreground or goodness of the background etc. In this paper, we define a notion of product-image quality based on various such features. We conduct a crowd-sourced experiment to collect user judgments on thousands of eBay's images. We formulate a multi-class classification problem for modeling image quality by classifying images into good, fair and poor quality based on the guided perceptual notions from the judges. We also conduct experiments with regression using average crowd-sourced human judgments as target. We compute a pseudo-regression score with expected average of predicted classes and also compute a score from the regression technique. We design many experiments with various sampling and voting schemes with crowd-sourced data and construct various experimental image quality models. Most of our models have reasonable accuracies (greater or equal to 70%) on test data set. We observe that our computed image quality score has a high (0.66) rank correlation with average votes from the crowd sourced human judgments.

  19. Pengaruh Shopping Orientation, Online Trust Dan Prior Online Purchase Experience Terhadap Online Purchase Intention (Studi Pada Online Shop Hijabi House)

    OpenAIRE

    Azifah, Nurul; Dewi, Citra Kusuma

    2016-01-01

    Salah satu fashion yang semakin berkembang di kalangan masyarakat Indonesia khususnya wanita muslimah adalah jilbab. Hijabi House merupakan salah satu online shop yang menawarkan jilbab hasil produksinya melalui media sosial Instagram. Hasil wawancara awal, Hijabi House dinilai baik namun masih ada keluhan dari para followers berkaitan shopping orientation, online trust, dan prior online purchase experience. Penelitian yang bertujuan untuk mengetahui pengaruh ketiga variabel tersebut terhadap...

  20. A causal model to evaluate the influence of consumer's perceptions of online shopping on their shopping behavior

    OpenAIRE

    Asakawa, Masami; Okano, Masao

    2009-01-01

    This study examined the factors influencing consumers' perception of online shopping and developed a causal model that explains how this perception affects their online-shopping behavior. We administered a questionnaire survey to 297 college students. By utilizing the answers to 13 questions pertaining to consumer perceptions, we conducted a factor analysis that identified the following three factors: "convenience", "anxiety regarding security" and "poor navigation". On the basis of this resu...