WorldWideScience

Sample records for shipyard complex operable

  1. Event-based scenario manager for multibody dynamics simulation of heavy load lifting operations in shipyards

    Directory of Open Access Journals (Sweden)

    Sol Ha

    2016-01-01

    Full Text Available This paper suggests an event-based scenario manager capable of creating and editing a scenario for shipbuilding process simulation based on multibody dynamics. To configure various situation in shipyards and easily connect with multibody dynamics, the proposed method has two main concepts: an Actor and an Action List. The Actor represents the anatomic unit of action in the multibody dynamics and can be connected to a specific component of the dynamics kernel such as the body and joint. The user can make a scenario up by combining the actors. The Action List contains information for arranging and executing the actors. Since the shipbuilding process is a kind of event-based sequence, all simulation models were configured using Discrete EVent System Specification (DEVS formalism. The proposed method was applied to simulations of various operations in shipyards such as lifting and erection of a block and heavy load lifting operation using multiple cranes.

  2. 75 FR 1832 - Assistance to Small Shipyards Grant Program

    Science.gov (United States)

    2010-01-13

    ... fixed assets); and (c) impact on company's projected financial condition (balance sheet) of completion... operating company of the shipyard facility. The shipyard facility must construct, repair, or reconfigure... including type of work; (g) vessels delivered (or major projects) over last 5 years; and (h) Web site...

  3. Review of Proposed Congressional Budget Exhibits for the Navy's Mission-Funded Shipyards

    National Research Council Canada - National Science Library

    Frisk, Daniel; Trunkey, R. D

    2006-01-01

    To improve shipyard reporting and address concerns about the decreased visibility of the operations and costs of mission-funded shipyards, the Congress asked the Navy to submit a report with proposed...

  4. The National Shipbuilding Research Program. Environmental Training Modules. Module 2 Shipyard Craft Specific Training

    Science.gov (United States)

    1999-05-01

    environmental liability. 4) Insecticides and Hazardous Metals Many antifouling coatings contain insecticides such as Tributyltin ( TBT ), and...of potentially toxic substances from shipyard welding operations. ASBESTOS OPERATIONS IN THE SHIPYARD (10ASBTOS.DOC) OBJECTIVE To ensure that...distillation operations. COOLING TOWERS (6-COOLIN.DOC) OBJECTIVE To minimize the potential for toxic emissions from cooling towers. VARNISH DIP TANKS (7

  5. New shipyard layout design for the preliminary phase & case study for the green field project

    Science.gov (United States)

    Song, Young Joo; Woo, Jong Hun

    2013-03-01

    For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.

  6. New shipyard layout design for the preliminary phase & case study for the green field project

    Directory of Open Access Journals (Sweden)

    Young Joo Song

    2013-03-01

    Full Text Available For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.

  7. Radiation haunts shipyard workers

    International Nuclear Information System (INIS)

    Torrey, L.

    1978-01-01

    The apparent link recently found by Dr. Najarian between cancer among workers at a US Naval dockyard where up to 5000 civilian employees have been exposed to low dose irradiation while servicing nuclear ships and their radiation exposure is discussed. The study has revealed that 38.4% of the deaths of nuclear workers at the Portsmouth Naval Shipyard in New Hampshire were caused by cancer while the comparable rate for non-nuclear shipyard workers was 21.7% and the national average in the United States is 18%. The Portsmouth study, launched in October 1977, was based on a survey of 1722 death certificates of shipyard employees and interviews with 592 next-of-kin. In addition the results show that the rate of leukaemia of the shipyard workers was 450% higher than that of the general population, and the incidence of lymph gland cancers was 125% higher than the national rate. The most startling statistics compared mortality among workers aged 60 to 69. In this age group nearly 60% of the nuclear employees had died of cancer, while the cancer death rate among non-nuclear workers was only 26%. If these results are confirmed present ideas concerning the effects of low doses of radiation must be challenged. (U.K.)

  8. Comparing Working-Capital Funding and Mission Funding for Naval Shipyards

    National Research Council Canada - National Science Library

    Frisk, Daniel; Trunkey, R. D

    2007-01-01

    ...) to direct appropriations. Previously, under the NWCF's revolving-fund approach, the shipyards set prices for maintenance and repair services that were intended to cover their full operating costs, and the Navy's Atlantic...

  9. 46 CFR 298.18 - Financing Shipyard Projects.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Financing Shipyard Projects. 298.18 Section 298.18 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VESSEL FINANCING ASSISTANCE OBLIGATION GUARANTEES Eligibility § 298.18 Financing Shipyard Projects. (a) Initial criteria. We may issue Guarantees to...

  10. South Carolina Shipyards: Labour, Logistics, Lumber and Ladies

    Science.gov (United States)

    Harris, Lynn

    2010-10-01

    Southern shipyards, like Hobcaw and Mars Bluff, were established at locations chosen primarily for convenient access to transportation networks, building materials, clientele and labour. The historical record reveals a home front role played by local plantation owners and slaves as shipyard labour. Women served as project fundraisers, shipyard dilettantes, shipwright’s wives and possibly slave mistresses with a paucity of material culture to confirm their presence in the archaeological record. Archaeological investigations on land and underwater yield evidence of artefacts associated with diet, shipbuilding, warfare and ethnicity.

  11. Smart Pipe System for a Shipyard 4.0

    Directory of Open Access Journals (Sweden)

    Paula Fraga-Lamas

    2016-12-01

    Full Text Available As a result of the progressive implantation of the Industry 4.0 paradigm, many industries are experimenting a revolution that shipyards cannot ignore. Therefore, the application of the principles of Industry 4.0 to shipyards are leading to the creation of Shipyards 4.0. Due to this, Navantia, one of the 10 largest shipbuilders in the world, is updating its whole inner workings to keep up with the near-future challenges that a Shipyard 4.0 will have to face. Such challenges can be divided into three groups: the vertical integration of production systems, the horizontal integration of a new generation of value creation networks, and the re-engineering of the entire production chain, making changes that affect the entire life cycle of each piece of a ship. Pipes, which exist in a huge number and varied typology on a ship, are one of the key pieces, and its monitoring constitutes a prospective cyber-physical system. Their improved identification, traceability, and indoor location, from production and through their life, can enhance shipyard productivity and safety. In order to perform such tasks, this article first conducts a thorough analysis of the shipyard environment. From this analysis, the essential hardware and software technical requirements are determined. Next, the concept of smart pipe is presented and defined as an object able to transmit signals periodically that allows for providing enhanced services in a shipyard. In order to build a smart pipe system, different technologies are selected and evaluated, concluding that passive and active RFID (Radio Frequency Identification are currently the most appropriate technologies to create it. Furthermore, some promising indoor positioning results obtained in a pipe workshop are presented, showing that multi-antenna algorithms and Kalman filtering can help to stabilize Received Signal Strength (RSS and improve the overall accuracy of the system.

  12. Smart Pipe System for a Shipyard 4.0.

    Science.gov (United States)

    Fraga-Lamas, Paula; Noceda-Davila, Diego; Fernández-Caramés, Tiago M; Díaz-Bouza, Manuel A; Vilar-Montesinos, Miguel

    2016-12-20

    As a result of the progressive implantation of the Industry 4.0 paradigm, many industries are experimenting a revolution that shipyards cannot ignore. Therefore, the application of the principles of Industry 4.0 to shipyards are leading to the creation of Shipyards 4.0. Due to this, Navantia, one of the 10 largest shipbuilders in the world, is updating its whole inner workings to keep up with the near-future challenges that a Shipyard 4.0 will have to face. Such challenges can be divided into three groups: the vertical integration of production systems, the horizontal integration of a new generation of value creation networks, and the re-engineering of the entire production chain, making changes that affect the entire life cycle of each piece of a ship. Pipes, which exist in a huge number and varied typology on a ship, are one of the key pieces, and its monitoring constitutes a prospective cyber-physical system. Their improved identification, traceability, and indoor location, from production and through their life, can enhance shipyard productivity and safety. In order to perform such tasks, this article first conducts a thorough analysis of the shipyard environment. From this analysis, the essential hardware and software technical requirements are determined. Next, the concept of smart pipe is presented and defined as an object able to transmit signals periodically that allows for providing enhanced services in a shipyard. In order to build a smart pipe system, different technologies are selected and evaluated, concluding that passive and active RFID (Radio Frequency Identification) are currently the most appropriate technologies to create it. Furthermore, some promising indoor positioning results obtained in a pipe workshop are presented, showing that multi-antenna algorithms and Kalman filtering can help to stabilize Received Signal Strength (RSS) and improve the overall accuracy of the system.

  13. Health effects of low-level radiation in shipyard workers

    International Nuclear Information System (INIS)

    Matanoski, G.M.

    1991-06-01

    The Nuclear Shipyard Workers Study (NSWS) was designed to determine whether there is an excess risk of leukemia or other cancers associated with exposure to low levels of gamma radiation. The study compares the mortality experience of shipyard workers who qualified to work in radiation areas to the mortality of similar workers who hold the same types of jobs but who are not authorized to work in radiation areas. The population consists of workers from six government and two private shipyards

  14. Treatment of emulsified oily wastewater by commercial scale electrocoagulation at Vancouver shipyards

    Energy Technology Data Exchange (ETDEWEB)

    Stephenson, R.J.; Tennant, B.D. [McKay Creek Technologies Ltd., North Vancouver, BC (Canada); Hartle, D.R. [Vancouver Shipping Co. Ltd., BC (Canada); Stuckert, B. [Quantum Environmental Group, Richmond, BC (Canada)

    2002-06-01

    Some of the emulsified oily wastewater generated by the Washington Marine Group fleet and the Vancouver shipyards are from sources such as bilge water, tank wash water from gas freeing operations, ballast water, and wastewater from pressure washing equipment. The Washington Marine Group is the largest shipbuilding, ship maintenance and repair, and marine transportation company in Canada, a group to which McKay Creek Technologies belongs. A investigation was performed in an attempt to find commercially viable means of treating this wastewater. McKay Creek Technologies developed its own cleaning process. Electrocoagulation is a process based on the use of an electrical current in an electrochemical cell to coagulate contaminants in wastewater. With three years of experience gained by treating the wastewater of the Washington Marine Group operations at Vancouver shipyards using this technology, McKay Creek Technologies has found ways to treat emulsified oily wastewater simply and effectively. It has been determined that electrocoagulation is an effective treatment method for emulsified oils, poly-nuclear aromatic hydrocarbons (PAHs), poorly settling solids, poorly soluble organics, contaminants which add turbidity to water, and negatively charged metal species like arsenic, molybdenum, and phosphate. A brief history of electrocoagulation was provided, and the authors explained the process and how it was applied to the situation at Vancouver shipyards. 2 refs., 5 tabs., 1 fig.

  15. Comparison of the Navy Working Capital Fund and Mission Funding as Applied to Navy Shipyards

    National Research Council Canada - National Science Library

    Cain, Andrew M

    2006-01-01

    .... This funding shift has raised questions about the advantages and disadvantages each financial system provides shipyards, the operating differences that occur due to the funding change, and the future...

  16. Comparing Working-Capital Funding and Mission Funding for Naval Shipyards

    National Research Council Canada - National Science Library

    Frisk, Daniel; Trunkey, R. D

    2007-01-01

    ...; and Pearl Harbor Naval Shipyard in Pearl Harbor, Hawaii. These shipyards maintain, repair, overhaul, and upgrade surface ships and submarines -- a range of services that costs the Navy over $3 billion annually...

  17. Radiological survey of the Pearl Harbor Naval Shipyard and Environs, Honolulu, Hawaii. Final report

    International Nuclear Information System (INIS)

    Callis, R.S.

    1987-06-01

    This report presents results of the survey conducted by the Eastern Environmental Radiation Facility personnel to assess levels of environmental radioactivity resulting from maintenance and operation of nuclear-powered warships at the Pearl Harbor Naval Shipyard and Environs on the Hawaiian Island of Oahu

  18. 76 FR 44265 - General Working Conditions in Shipyard Employment; Correction

    Science.gov (United States)

    2011-07-25

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration 29 CFR Part 1910 [Docket No. OSHA-S049-2006-0675 (Formerly Docket No. S-049)] RIN 1218-AB50 General Working Conditions in Shipyard... on General Working Conditions in Shipyard Employment published in the Federal Register of May 2, 2011...

  19. Automatic production planning for the construction of complex ships

    NARCIS (Netherlands)

    Rose, C.D.

    2017-01-01

    European shipyards specialize in building complex ship types including offshore vessels, yachts, dredgers, and cruise ships. One key difference between these ships and the simple cargo ships typically built in the Far East is the amount and variety of mission-related equipment required to operate

  20. Health effects of low-level radiation in shipyard workers. Final report: [Draft

    Energy Technology Data Exchange (ETDEWEB)

    Matanoski, G.M.

    1991-06-01

    The Nuclear Shipyard Workers Study (NSWS) was designed to determine whether there is an excess risk of leukemia or other cancers associated with exposure to low levels of gamma radiation. The study compares the mortality experience of shipyard workers who qualified to work in radiation areas to the mortality of similar workers who hold the same types of jobs but who are not authorized to work in radiation areas. The population consists of workers from six government and two private shipyards.

  1. Numerical simulation of groundwater flow at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington

    Science.gov (United States)

    Jones, Joseph L.; Johnson, Kenneth H.; Frans, Lonna M.

    2016-08-18

    Information about groundwater-flow paths and locations where groundwater discharges at and near Puget Sound Naval Shipyard is necessary for understanding the potential migration of subsurface contaminants by groundwater at the shipyard. The design of some remediation alternatives would be aided by knowledge of whether groundwater flowing at specific locations beneath the shipyard will eventually discharge directly to Sinclair Inlet of Puget Sound, or if it will discharge to the drainage system of one of the six dry docks located in the shipyard. A 1997 numerical (finite difference) groundwater-flow model of the shipyard and surrounding area was constructed to help evaluate the potential for groundwater discharge to Puget Sound. That steady-state, multilayer numerical model with homogeneous hydraulic characteristics indicated that groundwater flowing beneath nearly all of the shipyard discharges to the dry-dock drainage systems, and only shallow groundwater flowing beneath the western end of the shipyard discharges directly to Sinclair Inlet.Updated information from a 2016 regional groundwater-flow model constructed for the greater Kitsap Peninsula was used to update the 1997 groundwater model of the Puget Sound Naval Shipyard. That information included a new interpretation of the hydrogeologic units underlying the area, as well as improved recharge estimates. Other updates to the 1997 model included finer discretization of the finite-difference model grid into more layers, rows, and columns, all with reduced dimensions. This updated Puget Sound Naval Shipyard model was calibrated to 2001–2005 measured water levels, and hydraulic characteristics of the model layers representing different hydrogeologic units were estimated with the aid of state-of-the-art parameter optimization techniques.The flow directions and discharge locations predicted by this updated model generally match the 1997 model despite refinements and other changes. In the updated model, most

  2. 33 CFR 334.1160 - San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo.

    Science.gov (United States)

    2010-07-01

    ... practice area, Mare Island Naval Shipyard, Vallejo. 334.1160 Section 334.1160 Navigation and Navigable... REGULATIONS § 334.1160 San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo. (a..., Mare Island Naval Shipyard, Vallejo, California, will conduct target practice in the area at intervals...

  3. Three decades of TBT contamination in sediments around a large scale shipyard.

    Science.gov (United States)

    Kim, Nam Sook; Shim, Won Joon; Yim, Un Hyuk; Ha, Sung Yong; An, Joon Geon; Shin, Kyung Hoon

    2011-08-30

    Tributyltin (TBT) contamination in sediments was investigated in the vicinity of a large-scale shipyard in the years after the implementation of a total ban on the use of TBT based antifouling paints in Korea. Extremely high level of TBT (36,292ng Sn/g) in surface sediment was found at a station in front of a drydock and near surface runoff outfall of the shipyard. TBT concentration in surface sediments of Gohyeon Bay, where the shipyard is located, showed an apparent decreased TBT concentration gradient from the shipyard towards the outer bay. The vertical distribution of TBT contamination derived from a sediment core analysis demonstrated a significant positive correlation (r(2)=0.88; pTBT concentrations at six stations surveyed before (2003) and seven years after (2010) the total ban showed no significant differences (p>0.05). Despite the ban on the use of TBT, including ocean going vessels, surface sediments are still being heavily contaminated with TBT, and its levels well exceeded the sediment quality guideline or screening values. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. Integrated Treatment and Storage Solutions for Solid Radioactive Waste at the Russian Shipyard Near Polyarny

    International Nuclear Information System (INIS)

    Griffith, A.; Engoy, T.; Endregard, M.; Busmundrud, O.; Schwab, P.; Nazarian, A.; Krumrine, P.; Backe, S.; Gorin, S.; Evans, B.

    2002-01-01

    Russian Navy Yard No. 10 (Shkval), near the city of Murmansk, has been designated as the recipient for Solid Radioactive Waste (SRW) pretreatment and storage facilities under the Arctic Military Environmental Cooperation (AMEC) Program. This shipyard serves the Northern Fleet by servicing, repairing, and dismantling naval vessels. Specifically, seven nuclear submarines of the first and second generation and Victor class are laid up at this shipyard, awaiting defueling and dismantlement. One first generation nuclear submarine has already been dismantled there, but recently progress on dismantlement has slowed because all the available storage space is full. SRW has been placed in metal storage containers, which have been moved outside of the actual storage site, which increases the environmental risks. AMEC is a cooperative effort between the Russian Federation, Kingdom of Norway and the United States. AMEC Projects 1.3 and 1.4 specifically address waste treatment and storage issues. Various waste treatment options have been assessed, technologies selected, and now integrated facilities are being designed and constructed to address these problems. Treatment technologies that are being designed and constructed include a mobile pretreatment facility comprising waste assay, segregation, size reduction, compaction and repackaging operations. Waste storage technologies include metal and concrete containers, and lightweight modular storage buildings. This paper focuses on the problems and challenges that are and will be faced at the Polyarninsky Shipyard. Specifically, discussion of the waste quantities, types, and conditions and various site considerations versus the various technologies that are to be employed will be provided. A systems approach at the site is being proposed by the Russian partners, therefore integration with other ongoing and planned operations at the site will also be discussed

  5. Environmental management aspects for TBT antifouling wastes from the shipyards.

    Science.gov (United States)

    Kotrikla, Anna

    2009-02-01

    Tributyltin (TBT)-based antifouling paints have been successfully used for over 40 years to protect a ship's hull from biofouling. However, due to its high toxicity to marine organisms, the International Maritime Organization (IMO), in 1990, adopted a resolution recommending governments to adopt measures to eliminate antifouling paints containing TBT. High concentrations of TBT are detected in the vicinity of ports and shipyards. TBT is also usually detected in the sediment, in which it accumulates. This study reviews recent literature for the best management practices (BMPs) in order to minimize the environmental effects of TBT. The paper focuses on the evaluation of the available techniques for the removal of TBT from shipyard wastes and from the sediment. The most effective treatment methods are highlighted. BMPs include recycling of abrasive materials, use of cleaner abrasive materials, reuse of spent abrasive materials, substitution of hydroblasting by vacuum blasting or containment or ultra-high-pressure water blasting and confinement of pollution by enclosure and containment systems. The treatment of the TBT wastes by conventional biological wastewater treatment processes is probably not suitable, because the concentrations of TBT found in shipyards' wastewaters are toxic to microorganisms. Advanced technologies such as activated carbon adsorption and dissolved air flotation, in combination with filtration and coagulation-clarification, photodegradation and electrochemical treatment, are required to remove TBT. However, advanced methods should be further optimized to meet the regulatory limit of 200 ng/L. To date, only one published work examines the efficiency of incineration for the treatment of solid sandblast wastes. Regarding the treatment of sediment, land deposition of the less polluted fraction of sediment is a feasible option. Such treatment must take into account the risk of contamination of groundwater and the surroundings, and it requires

  6. 32 CFR 700.871 - Responsibility for safety of ships and craft at a naval station or shipyard.

    Science.gov (United States)

    2010-07-01

    ... a timely and adequate manner. (c) When a ship or craft not under her own power is being moved by... contractor. (d) When a ship operating under her own power is being drydocked, the commanding officer shall be... ship. (e) When a naval ship is to be drydocked in a private shipyard under a contract being...

  7. Nickel, vanadium, and lead as indicators of sediment contamination of marina, refinery, and shipyard areas.

    Science.gov (United States)

    Pereira, Thayane Lúcia; Wallner-Kersanach, Mônica; Costa, Luiza Dy Fonseca; Costa, Daniel Pereira; Baisch, Paulo Roberto Martins

    2018-01-01

    Metallic elements found in the aquatic environment may originate in areas where petroleum is refined and vessels are maintained and repaired. This study aims to assess contamination caused by nickel (Ni), lead (Pb), and vanadium (V) in sediment of the Lagoa dos Patos estuary (RS, Brazil) and to evaluate them as indicators of areas under the influence of petroleum products and antifouling paints. Surface sediments were collected in summer and in winter in areas of marinas, shipyards, refinery, and a control station. High Pb and V concentrations in shipyards and at the Yacht Club showed that some organisms may be affected by toxicity. High Pb results of the index of geoaccumulation (Igeo) were found at the Yacht Club and shipyards. Al, Ni, and V had similar distribution in the sediment in both seasons. Ni and V had high relation in winter at the Yacht Club and at the Santos Shipyard, thus suggesting that these elements come mainly from petroleum products. The same happened to the relations between Pb and V, as well as Pb and Ni at the Santos Shipyard. These elements are employed as useful tools as indicators to identify places with moderate to high localized anthropogenic inputs of petroleum derivatives and antifouling paints.

  8. Investigation of VOC emissions from indoor and outdoor painting processes in shipyards

    Science.gov (United States)

    Celebi, Ugur Bugra; Vardar, Nurten

    Volatile organic compounds (VOCs) from painting solvents are one of the most important sources of pollutant outputs for the shipbuilding and ship repair industry. Two ships of equal tonnage with the same painted area as each other, which were built in Turkish shipyards, are compared in terms of VOCs produced during painting and coating. Total area of all painted surfaces and total paint consumption of a 3500 deadweight tonne (DWT) oil/chemical tanker and a general cargo ship are calculated. An improved model for calculating the surface emissions of VOCs from painting and coating processes is utilized. Material balance emission estimation approach is employed to calculate the amount of VOCs, since it is used most often where a relatively large amount of material is emitted during use, and/or all air emissions are uncaptured. For both ships calculated VOCs are presented in figures. For the years 2005 and 2006 the total deadweight tonnage of ships delivered in Tuzla region, where 42 shipyards are located, is known. Therefore, a linear estimation is made to guess the total annual VOC emissions caused by painting operations. Finally, this information is used to project the total amount of VOCs emitted to the atmosphere for the year 2010.

  9. Personnel Requirements for an Advanced Shipyard Technology.

    Science.gov (United States)

    1979-09-01

    emergence of Japan as an aggressive and highly successful competitor for western vessel orders and the determination of some less-developed countries...continental United States and the Virgin Islands is specifically excluded from the Jones Act. Participation in Great Lakes international service between U.S...Virtually all shipyard workers were covered by benefits packages that included paid holidays and vacations and at least partial payment for the

  10. Annual Report: 2010-2011 Storm Season Sampling For NON-DRY DOCK STORMWATER MONITORING FOR PUGET SOUND NAVAL SHIPYARD, BREMERTON, WA

    Energy Technology Data Exchange (ETDEWEB)

    Brandenberger, Jill M.; Metallo, David; Johnston, Robert K.; Gebhardt, Christine; Hsu, Larry

    2012-09-01

    This interim report summarizes the stormwater monitoring conducted for non-dry dock outfalls in both the confined industrial area and the residential areas of Naval Base Kitsap within the Puget Sound Naval Shipyard (referred to as the Shipyard). This includes the collection, analyses, and descriptive statistics for stormwater sampling conducted from November 2010 through April 2011. Seven stormwater basins within the Shipyard were sampled during at least three storm events to characterize non-dry dock stormwater discharges at selected stormwater drains located within the facility. This serves as the Phase I component of the project and Phase II is planned for the 2011-2012 storm season. These data will assist the Navy, USEPA, Ecology and other stakeholders in understanding the nature and condition of stormwater discharges from the Shipyard and inform the permitting process for new outfall discharges. The data from Phase I was compiled with current stormwater data available from the Shipyard, Sinclair/Dyes Inlet watershed, and Puget Sound in order to support technical investigations for the Draft NPDES permit. The permit would require storm event sampling at selected stormwater drains located within the Shipyard. However, the data must be considered on multiple scales to truly understand potential impairments to beneficial uses within Sinclair and Dyes Inlets.

  11. An early modern factory between state and market: labor and management at the Amsterdam naval shipyard (1660-1795)

    NARCIS (Netherlands)

    Brandon, P.; de Jong, A.; Wubs, B.

    2012-01-01

    Naval shipyards were among the largest production facilities of the pre-industrial world. The Venetian Arsenal and the British Royal Dockyards therefore play a prominent role in the historiography of early modern labor relations. However, labor relations at the Dutch naval shipyards remain

  12. Environmental Training Modules. Module 3 - Shipyard Incident Response Training

    Science.gov (United States)

    1999-05-01

    oxidizing or through fermentation ). • Absorption of oxygen (caused by the vessel itself or the contents stored in it). Shipyard HazMat Technician...environmental effects • May be difficult to find in bulk quantities. • * Dilute acetic acid ( vinegar ) Caustic spills have routinely been neutralized with

  13. Radiation exposure assessment for Portsmouth Naval Shipyard health studies

    International Nuclear Information System (INIS)

    Daniels, R. D.; Taulbee, T. D.; Chen, P.

    2004-01-01

    Occupational radiation exposures of 13,475 civilian nuclear shipyard workers were investigated as part of a retrospective mortality study. Estimates of annual, cumulative and collective doses were tabulated for future dose-response analysis. Record sets were assembled and amended through range checks, examination of distributions and inspection. Methods were developed to adjust for administrative overestimates and dose from previous employment. Uncertainties from doses below the recording threshold were estimated. Low-dose protracted radiation exposures from submarine overhaul and repair predominated. Cumulative doses are best approximated by a hybrid log-normal distribution with arithmetic mean and median values of 20.59 and 3.24 mSv, respectively. The distribution is highly skewed with more than half the workers having cumulative doses 95% having doses <100 mSv. The maximum cumulative dose is estimated at 649.39 mSv from 15 person-years of exposure. The collective dose was 277.42 person-Sv with 96.8% attributed to employment at Portsmouth Naval Shipyard. (authors)

  14. Investigation of elemental and radiological contamination of soils in two shipyards in Chittagong, Bangladesh

    International Nuclear Information System (INIS)

    Uddin, M. Shuza; Shariff, M. Asad; Hasan, M. Mehedi

    2014-01-01

    An analysis of metallic elements and natural radioactivity in soils collected from two shipyards and their surroundings in Chittagong, Bangladesh is presented. The elemental concentrations of the metals Cr, Mn, Fe, Ni and Cu were obtained by PIXE analysis with a 3 MV Tandem Accelerator, and the radioactivity of 226 Ra, 232 Th and 40 K was determined using HPGe gamma-ray spectrometry. From the mean specific activities of the three radionuclides in soil samples, the radium equivalent activity, the gamma absorbed dose rate, the annual effective dose rate and the external hazard index were calculated. The study was focused on investigation of soil contamination via shipbreaking activities, if any. The somewhat higher contents of Cr, Mn, Fe, Ni and Cu in soil samples of shipyards, as compared to other locations, seem to be caused by the shipbreaking activities. The specific radioactivities as well as radium equivalent activity in soils of shipyards are also higher and thus possibly an indirect result of shipbreaking activities.

  15. Investigation of elemental and radiological contamination of soils in two shipyards in Chittagong, Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Uddin, M. Shuza; Shariff, M. Asad; Hasan, M. Mehedi [Tandem Accelerator Facility, Dhaka (Bangladesh). Inst. of Nuclear Science and Technology, Atomic Energy Research Establishment; Barua, Bijoy Sonker [Tandem Accelerator Facility, Dhaka (Bangladesh). Inst. of Nuclear Science and Technology, Atomic Energy Research Establishment; Chittagong Univ. of Engineering and Technology, Chittagong (Bangladesh). Dept. of Physics; Rashid, M. Abdur [Chittagong Univ. of Engineering and Technology, Chittagong (Bangladesh). Dept. of Physics; Kamal, Masud [Radioactivity Testing and Monitoring Lab. Bangladesh Atomic Energy Commission, Chittagong (Bangladesh)

    2014-10-01

    An analysis of metallic elements and natural radioactivity in soils collected from two shipyards and their surroundings in Chittagong, Bangladesh is presented. The elemental concentrations of the metals Cr, Mn, Fe, Ni and Cu were obtained by PIXE analysis with a 3 MV Tandem Accelerator, and the radioactivity of {sup 226}Ra, {sup 232}Th and {sup 40}K was determined using HPGe gamma-ray spectrometry. From the mean specific activities of the three radionuclides in soil samples, the radium equivalent activity, the gamma absorbed dose rate, the annual effective dose rate and the external hazard index were calculated. The study was focused on investigation of soil contamination via shipbreaking activities, if any. The somewhat higher contents of Cr, Mn, Fe, Ni and Cu in soil samples of shipyards, as compared to other locations, seem to be caused by the shipbreaking activities. The specific radioactivities as well as radium equivalent activity in soils of shipyards are also higher and thus possibly an indirect result of shipbreaking activities.

  16. Corporate Strategies and Global Competition: Odense Steel Shipyard, 1918-2012

    DEFF Research Database (Denmark)

    Poulsen, Rene Taudal; Jensen, Kristoffer; Christensen, Rene Schroder

    2017-01-01

    This article analyzes the competitive strategies of Odense Steel Shipyard between 1918 and 2012 and challenges existing scholarship on competition in global industries. Until the 1980s, the yard adopted typical strategies in shipbuilding, starting with cost leadership and subsequently adopting...

  17. The development of internet based ship design support system for small and medium sized shipyards

    Science.gov (United States)

    Shin, Sung-Chul; Lee, Soon-Sup; Kang, Dong-Hoon; Lee, Kyung-Ho

    2012-03-01

    In this paper, a prototype of ship basic planning system is implemented for the small and medium sized shipyards based on the internet technology and concurrent engineering concept. The system is designed from the user requirements. Consequently, standardized development environment and tools are selected. These tools are used for the system development to define and evaluate core application technologies. The system will contribute to increasing competitiveness of small and medium sized shipyards in the 21st century industrial en-vironment.

  18. Confined space ventilation by shipyard welders: observed use and effectiveness.

    Science.gov (United States)

    Pouzou, Jane G; Warner, Chris; Neitzel, Richard L; Croteau, Gerry A; Yost, Michael G; Seixas, Noah S

    2015-01-01

    Shipbuilding involves intensive welding activities within enclosed and confined spaces, and although ventilation is commonly used in the industry, its use and effectiveness has not been adequately documented. Workers engaged in welding in enclosed or confined spaces in two shipyards were observed for their use of ventilation and monitored for their exposure to particulate matter. The type of ventilation in use, its placement and face velocity, the movement of air within the space, and other ventilation-related parameters were recorded, along with task characteristics such as the type of welding, the welder's position, and the configuration of the space. Mechanical ventilation was present in about two-thirds of the 65 welding scenarios observed, with exhaust ventilation used predominantly in one shipyard and supply blowers predominantly in the other. Welders were observed working in apparent dead-spaces within the room in 53% of the cases, even where ventilation was in use. Respiratory protection was common in the two shipyards, observed in use in 77 and 100% of the cases. Welding method, the proximity of the welder's head to the fume, and air mixing were found to be significantly associated with the welder's exposure, while other characteristics of dilution ventilation did not produce appreciable differences in exposure level. These parameters associated with exposure reduction can be assessed subjectively and are thus good candidates for training on effective ventilation use during hot work in confined spaces. Ventilation used in confined space welding is often inadequate for controlling exposure to welding fume. © The Author 2014. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  19. The Evolution of Cost/Schedule Control (Direct Labor) in Naval Shipyards

    National Research Council Canada - National Science Library

    Gessis, Scott N

    1992-01-01

    The evolution of a Cost/Schedule Control System (C/SCS), for direct labor, in naval shipyards can be traced from the cost/schedule control concept used in the Air Force in the 1960s, as an initiative toward more reliable data...

  20. A Study of the Chinese Shipyard Management Control System.

    Science.gov (United States)

    1987-09-01

    market, however, som significant. changes occured in that control system Why these changes occured can be explained with institutional theory . Taken...management control system developed in Chinese shipyards can be explained by either the resource dependency or the institutional theory . The focus is on...34 Institutional theory treats organizations as successful to the extent that they embody societal myths concerning rationality. A societal myth, in this case, is

  1. Magnetic characteristics of sediment grains concurrently contaminated with TBT and metals near a shipyard in Busan, Korea.

    Science.gov (United States)

    Choi, Jin Young; Hong, Gi Hoon; Ra, Kongtae; Kim, Kyung-Tae; Kim, Kyoungrean

    2014-08-30

    Bottom sediments near shipyards are often susceptible to receiving accidental spills of TBT and metals or their degradation products from hull scraping of antifouling system paints applied prior to 2008, when the AFS Convention 2001 was not in force. We investigated TBT and metal contamination of sediments near the shipyards of a small marina located in Busan, Korea and found that they were highly contaminated with TBT, Cu, and Zn. To better understand the environmental impacts and to make an optimal remediation plan, we characterized individual antifouling fragments in terms of metal and TBT contents, magnetic properties, and grain-size. Coarse-sized individual antifouling fragments exhibited simultaneously high levels of TBT, metals and high magnetic susceptibility, and appeared to be a major source of pollution in the sediment. Therefore, magnetic separation in combination with size-separation appears to be a cost-effective remediation method to remove the TBT and metals from contaminated shipyard sediments. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. [Relationship between asbestos exposure and malignant pleural mesothelioma: occurrence near the old Japanese naval shipyard].

    Science.gov (United States)

    Kishimoto, T

    1994-12-01

    Kure City, Hiroshima Prefecture, was the site of a Japanese naval shipyard before World War II, and commercial ships were built there after the War. Large amounts of asbestos were used in this area primarily for shipbuilding, from before the war to around 1975. Probably due to exposure to asbestos, the incidence of malignant pleural mesothelioma is high in this city. Of the 31 patients with this disease, 27 were men. Patients over 60 years of age constituted a high percentage of the total and 28 had a history of asbestos exposure: 12 in the Japanese naval shipyard and 12 in the commercial shipyards. The average period of asbestos exposure for these 28 patients was 20 years. Malignant pleural mesothelioma developed more than 40 years after the first exposure to asbestos. Many asbestos particles and fibers were detected in the lungs and tumors of these patients. Most of the asbestos fibers detected were crocidolites or amosites. Considering that the amount of asbestos used in Japanese has been higher than in any other country, the incidence of malignant pleural mesothelioma may be expected to increase in this country. Countermeasures are now advisable.

  3. Health effects of low-level radiation in shipyard workers: report of previous work

    International Nuclear Information System (INIS)

    Matanoski, G.M.

    1984-01-01

    Progress over the course of the Nuclear Shipyard Workers Study is reported. The derivation of the study population, the gathering of health histories, the US Navy radiation protection program, and the determination of radiation exposures is described

  4. Sickness absence in the private sector of Greece: comparing shipyard industry and national insurance data.

    Science.gov (United States)

    Alexopoulos, Evangelos C; Merekoulias, Georgios; Tanagra, Dimitra; Konstantinou, Eleni C; Mikelatou, Efi; Jelastopulu, Eleni

    2012-04-01

    Approximately 3% of employees are absent from work due to illness daily in Europe, while in some countries sickness absence exceeds 20 days per year. Based on a limited body of reliable studies, Greek employees in the private sector seem to be absent far less frequently (industrialized world. The aim of this study was to estimate the levels of sickness absence in the private sector in Greece, using shipyard and national insurance data. Detailed data on absenteeism of employees in a large shipyard company during the period 1999-2006 were utilized. National data on compensated days due to sickness absence concerning all employees (around 2 million) insured by the Social Insurance Institute (IKA, the largest insurance scheme in Greece) were retrieved from the Institute's annual statistical reports for the period 1987-2006. Sick-leave days per employee and sick-leave rate (%) were calculated, among other indicators. In the shipyard cohort, the employment time loss due to sick leave was 1%. The mean number of sick-leave days per employee in shipyards ranged between 4.6 and 8.7 and sick-leave rate (sickness absenteeism rate) varied among 2% and 3.7%. The corresponding indicators for IKA were estimated between 5 and 6.3 sick-leave days per insured employee (median 5.8), and 2.14-2.72% (median 2.49%), respectively. Short sick-leave spells (industrialized world. In the 20-years national data, the results also showed a 7-year wave in sickness absence indexes (a decrease during the period 1991-1997 and an increase in 1998-2004) combined with a small yet significant decline as a general trend. These observations deserve detailed monitoring and could only partly be attributed to the compensation and unemployment rates in Greece so other possible reasons should be explored.

  5. A System for Complex Robotic Welding

    DEFF Research Database (Denmark)

    Madsen, Ole; Sørensen, Carsten Bro; Olsen, Birger

    2002-01-01

    This paper presents the architecture of a system for robotic welding of complex tasks. The system integrates off-line programming, control of redundant robots, collision-free motion planning and sensor-based control. An implementation for pipe structure welding made at Odense Steel Shipyard Ltd......., Denmark, demonstrates the system can be used for automatic welding of complex products in one-of-a-kind production....

  6. A Fog Computing and Cloudlet Based Augmented Reality System for the Industry 4.0 Shipyard.

    Science.gov (United States)

    Fernández-Caramés, Tiago M; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Vilar-Montesinos, Miguel

    2018-06-02

    Augmented Reality (AR) is one of the key technologies pointed out by Industry 4.0 as a tool for enhancing the next generation of automated and computerized factories. AR can also help shipbuilding operators, since they usually need to interact with information (e.g., product datasheets, instructions, maintenance procedures, quality control forms) that could be handled easily and more efficiently through AR devices. This is the reason why Navantia, one of the 10 largest shipbuilders in the world, is studying the application of AR (among other technologies) in different shipyard environments in a project called "Shipyard 4.0". This article presents Navantia's industrial AR (IAR) architecture, which is based on cloudlets and on the fog computing paradigm. Both technologies are ideal for supporting physically-distributed, low-latency and QoS-aware applications that decrease the network traffic and the computational load of traditional cloud computing systems. The proposed IAR communications architecture is evaluated in real-world scenarios with payload sizes according to demanding Microsoft HoloLens applications and when using a cloud, a cloudlet and a fog computing system. The results show that, in terms of response delay, the fog computing system is the fastest when transferring small payloads (less than 128 KB), while for larger file sizes, the cloudlet solution is faster than the others. Moreover, under high loads (with many concurrent IAR clients), the cloudlet in some cases is more than four times faster than the fog computing system in terms of response delay.

  7. Sensors Systems for the Automation of Operations in the Ship Repair Industry

    Science.gov (United States)

    Navarro, Pedro Javier; Muro, Juan Suardíaz; Alcover, Pedro María; Fernández-Isla, Carlos

    2013-01-01

    Hull cleaning before repainting is a key operation in the maintenance of ships. For years, a method to improve such operation has been sought by means of the robotization of techniques such as grit blasting and ultra high pressure water jetting. Despite this, it continues to be standard practice in shipyards that this process is carried out manually because the developed robotized systems are too expensive to be widely accepted by shipyards. We have chosen to apply a more conservative and realistic approach to this problem, which has resulted in the development of several solutions that have been designed with different automation and operation range degrees. These solutions are fitted with most of the elements already available in many shipyards, so the installation of additional machinery in the workplace would not be necessary. This paper describes the evolutionary development of sensor systems for the automation of the preparation process of ship hull surfaces before the painting process is performed. Such evolution has given rise to the development of new technologies for coating removal. PMID:24064601

  8. Demonstration of Enhanced Filtration for Treatment of Shipyard Storm Water, Deliverable 1, Design Report

    National Research Council Canada - National Science Library

    2000-01-01

    .... Shipyards are among the first industries to be targeted by the states for heavier regulation because of their high-profile water front locations and their necessary use of toxic antifouling compounds in hull coatings...

  9. A Systematic Approach to Strategy Formulation for Medium-Sized Shipyards

    OpenAIRE

    Ma'ruf, Buana

    2007-01-01

    A more comprehensive strategy formulation has an important role for sustainable competitive advantage of the shipbuilding companies in the global market. The nature of shipbuilding industry differs from general industry, therefore a strategy formulation model should be developed based on its own characteristics and business environment. This paper presents a proposed strategy formulation model for medium-sized shipyards both in business and corporate levels. A new approach was developed based...

  10. Comparison of the Navy Working Capital Fund and Mission Funding as Applied to Navy Shipyards

    National Research Council Canada - National Science Library

    Cain, Andrew M

    2006-01-01

    .... Specifically, the Navy has shifted two of its four shipyards, with authorization to shift the other two in FY07, from the Navy Working Capital Fund to mission funding through direct congressional appropriations...

  11. Evaluation of charred porous polymers as a method of storm water pollution prevention for shipyards

    Energy Technology Data Exchange (ETDEWEB)

    Clark, G.E.

    1998-08-01

    Most shipyards have viable Best Management Practices (BMPs) in place to mitigate the transport of heavy metals to surface waters by storm water. Despite aggressive efforts to control storm water, shipyards have come under increased regulatory pressure to further reduce concentrations of heavy metals, such as copper and nickel, in storm water discharges. The tightening of regulatory requirements warrants research into additional BMPs. The objectives of this research project were to: (1) determine the feasibility of placing a replaceable cartridge of adsorbent material within a storm water collection system; and (2) evaluate two commercially available charred porous polymer adsorbents for the removal of heavy metals from storm water. The results indicated that there are commercially available storm water treatment components which could be adapted to house a cartridge of porous adsorbent material.

  12. An Evaluation of Shipyard Practices and Their Correlation to Ship Costs

    Science.gov (United States)

    2017-12-01

    shareholders. This increases public investment into the company allowing it to flourish. 36 h. Ingalls Shipyard Employees Improved processes and cost ...some of the detriment of such a bottleneck could benefit the shipbuilding process by mitigating the adverse cost and quality impact of the...done to the best of the Navy’s ability, the benefit will be more efficient shipbuilding processes that incur cost and schedule savings and possible

  13. A Comprehensive Copper Compliance Strategy: Implementing Regulatory Guidance at Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility

    National Research Council Canada - National Science Library

    Earley, P. J; Rosen, G; Rivera-Duarte, I; Gauthier, R. D; Arias-Thode, Y; Thompson, J; Swope, B

    2007-01-01

    Studies were performed to develop a new National Pollution Discharge Elimination Systems Permit for the discharge of effluents from the Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility into Pearl Harbor...

  14. Sickness Absence in the Private Sector of Greece: Comparing Shipyard Industry and National Insurance Data

    Directory of Open Access Journals (Sweden)

    Eleni Jelastopulu

    2012-04-01

    Full Text Available Approximately 3% of employees are absent from work due to illness daily in Europe, while in some countries sickness absence exceeds 20 days per year. Based on a limited body of reliable studies, Greek employees in the private sector seem to be absent far less frequently ( < 5 days/year compared to most of the industrialized world. The aim of this study was to estimate the levels of sickness absence in the private sector in Greece, using shipyard and national insurance data. Detailed data on absenteeism of employees in a large shipyard company during the period 1999–2006 were utilized. National data on compensated days due to sickness absence concerning all employees (around 2 million insured by the Social Insurance Institute (IKA, the largest insurance scheme in Greece were retrieved from the Institute’s annual statistical reports for the period 1987–2006. Sick-leave days per employee and sick-leave rate (% were calculated, among other indicators. In the shipyard cohort, the employment time loss due to sick leave was 1%. The mean number of sick-leave days per employee in shipyards ranged between 4.6 and 8.7 and sick-leave rate (sickness absenteeism rate varied among 2% and 3.7%. The corresponding indicators for IKA were estimated between 5 and 6.3 sick-leave days per insured employee (median 5.8, and 2.14–2.72% (median 2.49%, respectively. Short sick-leave spells ( < 4 days may account at least for the 25% of the total number of sick-leave days, currently not recorded in national statistics. The level of sickness absence in the private sector in Greece was found to be higher than the suggested by previous reports and international comparative studies, but still remains one of the lowest in the industrialized world. In the 20-years national data, the results also showed a 7-year wave in sickness absence indexes (a decrease during the period 1991–1997 and an increase in 1998–2004 combined with a small yet significant decline as a

  15. Asbestos exposure-cigarette smoking interactions among shipyard workers

    International Nuclear Information System (INIS)

    Blanc, P.D.; Golden, J.A.; Gamsu, G.; Aberle, D.R.; Gold, W.M.

    1988-01-01

    The authors studied the roentgenograms, pulmonary function tests, and physical findings of 294 shipyard workers to evaluate asbestos exposure-cigarette smoking interactions. Roentgenographic parenchymal opacities, decreased pulmonary diffusing capacity for carbon monoxide, decreased flow at low lung volume, rales, and clubbing were each significantly related to the number of years elapsed since first exposure to asbestos and cigarette smoking status when analyzed by logistic regression. A dose-dependent cigarette smoking response that was consistent with synergism was present only for parenchymal opacities and decreased flow at low lung volume. These findings suggest that decreased flow at low lung volume, possibly reflecting peribronchiolar fibrosis, may be a functional corollary to smoking-associated parenchymal roentgenographic opacities among some asbestos-exposed individuals

  16. Non-auditory effects of noise in industry. V. A field study in a shipyard

    NARCIS (Netherlands)

    van Dijk, F. J.; Verbeek, J. H.; de Fries, F. F.

    1987-01-01

    Workers of a shipbuilding and a machine shop department of a shipyard, with average noise levels of 98 dB(A) and 85.5 dB(A) respectively, were compared with respect to auditory and non-auditory effects. The distribution of years of noise exposure and of age was similar in both departments. No

  17. Post Exit Knowledge Diffusion in the Aftermath of the Danish Shipyards

    DEFF Research Database (Denmark)

    Holm, Jacob Rubæk; Østergaard, Christian Richter; Roslyng Olesen, Thomas

    2012-01-01

    A growing literature sees labour mobility as a source of knowledge diffusion that benefits the receiving company. However, labour mobility is not necessaril y a source of positive knowledge transfer, but also leads to destruction of knowledge. This paper explores what happens to the employees fro...... environment. Collaboration by the owners of the shipyard and local government to facilitate spin-offs, on the other hand, tends to be an effective way of ensuring that the workers made redundant by the shipyard’s closure find new jobs....

  18. Complexity rating of abnormal events and operator performance

    International Nuclear Information System (INIS)

    Oeivind Braarud, Per

    1998-01-01

    The complexity of the work situation during abnormal situations is a major topic in a discussion of safety aspects of Nuclear Power plants. An understanding of complexity and its impact on operator performance in abnormal situations is important. One way to enhance understanding is to look at the dimensions that constitute complexity for NPP operators, and how those dimensions can be measured. A further step is to study how dimensions of complexity of the event are related to performance of operators. One aspect of complexity is the operator 's subjective experience of given difficulties of the event. Another related aspect of complexity is subject matter experts ratings of the complexity of the event. A definition and a measure of this part of complexity are being investigated at the OECD Halden Reactor Project in Norway. This paper focus on the results from a study of simulated scenarios carried out in the Halden Man-Machine Laboratory, which is a full scope PWR simulator. Six crews of two licensed operators each performed in 16 scenarios (simulated events). Before the experiment subject matter experts rated the complexity of the scenarios, using a Complexity Profiling Questionnaire. The Complexity Profiling Questionnaire contains eight previously identified dimensions associated with complexity. After completing the scenarios the operators received a questionnaire containing 39 questions about perceived complexity. This questionnaire was used for development of a measure of subjective complexity. The results from the study indicated that Process experts' rating of scenario complexity, using the Complexity Profiling Questionnaire, were able to predict crew performance quite well. The results further indicated that a measure of subjective complexity could be developed that was related to crew performance. Subjective complexity was found to be related to subjective work load. (author)

  19. ICD Complex Operations and Maintenance Plan

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, P. L.

    2007-06-25

    This Operations and Maintenance (O&M) Plan describes how the Idaho National Laboratory (INL) conducts operations, winterization, and startup of the Idaho CERCLA Disposal Facility (ICDF) Complex. The ICDF Complex is the centralized INL facility responsible for the receipt, storage, treatment (as necessary), and disposal of INL Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) remediation waste.

  20. Welding mechanization in shipyard CIM; Zosen ni okeru yosetsu no jidoka robot ka CIM ka

    Energy Technology Data Exchange (ETDEWEB)

    Miyazaki, T. [Hitachi Zosen Corp., Osaka (Japan)

    1997-12-01

    This paper explains development and examples of application of automated welding devices from a viewpoint of an element technology constituting computer integrated manufacturing (CIM), based on the history of modernization of shipyards that has been achieved to date. In the first step of promoting the modernization, elevating cutting accuracy in the uppermost stream process was thought a starting point of rationalization. What have been achieved therefrom are adoption of the most advanced NC plasma cutting machine, and improvement in the computer aided system for the cutting machines. In addition, a twenty-electrode line welder has been developed, which does not create angle deformation in welding longerons, and can be operated even by unskilled workers. The welder has successfully realized a construction method in which robots can be applied more easily. Further developments have been made on a robot to weld cells, advanced CAD/CAM operation techniques which are linked with data from design, an automatic one-side welding device which can achieve a speed 2.5 times greater than by conventional devices, and an automation device for three-dimensionally bent blocks, whose automation has been regarded difficult. 11 figs., 1 tab.

  1. A Research on the Determination of the Perception Levels of Shipyard Workers Related To Occupational Health and Security: Yalova Case

    Directory of Open Access Journals (Sweden)

    Ersin Kavi

    2011-06-01

    Full Text Available Shipbuilding sector, which has an important employment and export potential, is getting importance in Turkey. In this sector, the number of employees who work directly is 35.000 and the numbers of employees who work indirectly 100.000 are employed. The sector requires obligations and necessary activities in terms of vocational health and security since it includes working risks and has an increasing importance. Because of the lack of the vocational health and security measures, it has been seen many deaths and accidents in Tuzla Shipyards. Especially, the lack of trainings and measures to prevent to the industrial accident is an indication that there is a perception problem towards vocational health and security. Contrary to this, though it is taught on vocational health and security, the perceptions of the workers may not be enough. In this mean, it needs to be studied what to extend and how the workers perceive and apply the vocational health and security trainings or applications, which are taught at the shipyards, in workplace. In this paper, it is going to be studied the knowledge level of the workers related to the vocational health and security, determined training needs and if they satisfied with the trainings and measures by a survey in the Yalova shipyards.

  2. Case-control study of mesothelioma in the shipyard industry

    International Nuclear Information System (INIS)

    Correa-Villasenor, A.

    1987-01-01

    A nested case-control study was undertaken to investigate the relationship between occupational exposures to asbestos and low-level gamma radiation and mesothelioma. One hundred nineteen cases and four hundred fifty-two latency-matched controls were selected. Analyses were conducted using the conditional maximum likelihood estimate of the odds ratio and conditional logistic regression for matched sets. The results from the analyses revealed a relationship between asbestos exposure and mesothelioma; the strength of this relationship increased with the intensity and duration of the asbestos exposure. Exposure to low-level gamma radiation was also associated with an increased risk of mesothelioma. There was no interaction between asbestos and radiation. Shipyard employment in non-asbestos jobs and male gender were also found to be associated with mesothelioma

  3. Cálculo estructural de un varadero de buques. // Shipyard structural calculation.

    Directory of Open Access Journals (Sweden)

    Taymí Rodríguez Delgado

    2001-04-01

    Full Text Available En el presente trabajo, a partir de las técnicas de computación, se realiza el análisis estructural de un varadero de buques,con 2000 toneladas de capacidad. Para cumplimentar lo antes señalado es empleando un programa de computación, basadoen el Método de los Elementos Finitos, se generó el modelo físico-matemático de la estructura, para lo cual secumplimentaron dos etapas:!ra. etapa: Elaboración de la geometría del modelo, utilizando elementos sólidos planos triangulares y cuadriláteros.2da etapa: Definición de las restricciones al movimiento y las fuerzas externas actuantes.Además se realizó el estudio del comportamiento resistivo de la estructura de producción nacional, sometiendo el modelofísico-matemático a las condiciones extremas de explotación que plantea el fabricante. De este estudio, basado en el análisisde los esfuerzos equivalentes promedios. Fue concluido que el varadero diseñado puede reducir su peso e incrementar suvida útil produciéndose esfuerzos equivalentes promedios inferiores al limite de fluencia de los aceros que se emplean eneste tipo de estructuras. Esta disminución del peso se obtiene de al variar solamente los espesores manteniendo laslongitudes y alturas de los elementos que conforman la estructura del varadero.Palabras claves: Cálculo estructural, varadero de buques, métodos de elementos finitos, modelo físicomatemático.___________________________________________________________________AbstractA structural analysis of a 2000 tons capacity shipyard is carried out, starting from computers techniques. To acomplish thetask is used a calculation program, based on the finite elements method , the physical-mathematical pattern of the structurewas generated, for which two stages were executed:!st. stage: Elaboration of the geometry pattern , using quadrilateral and triangular plane solid elements.2nd. stage: Definitions of movement restrictions and location of external acting forces

  4. A study for production simulation model generation system based on data model at a shipyard

    Directory of Open Access Journals (Sweden)

    Myung-Gi Back

    2016-09-01

    Full Text Available Simulation technology is a type of shipbuilding product lifecycle management solution used to support production planning or decision-making. Normally, most shipbuilding processes are consisted of job shop production, and the modeling and simulation require professional skills and experience on shipbuilding. For these reasons, many shipbuilding companies have difficulties adapting simulation systems, regardless of the necessity for the technology. In this paper, the data model for shipyard production simulation model generation was defined by analyzing the iterative simulation modeling procedure. The shipyard production simulation data model defined in this study contains the information necessary for the conventional simulation modeling procedure and can serve as a basis for simulation model generation. The efficacy of the developed system was validated by applying it to the simulation model generation of the panel block production line. By implementing the initial simulation model generation process, which was performed in the past with a simulation modeler, the proposed system substantially reduced the modeling time. In addition, by reducing the difficulties posed by different modeler-dependent generation methods, the proposed system makes the standardization of the simulation model quality possible.

  5. A Study of the Causes of Man-Hour Variance of Naval Shipyard Work Standards (The National Shipbuilding Research Program)

    National Research Council Canada - National Science Library

    Bunch, Howard M

    1989-01-01

    This paper is a presentation of the results of a study conducted at a U.S. Navy shipyard during 1987 concerning the relationship between engineering standards and the variances that were occurring in production budget and charged manhours...

  6. Chemical-Induced Hearing Loss in Shipyard Workers.

    Science.gov (United States)

    Schaal, Nicholas Cody; Slagley, Jeremy M; Richburg, Cynthia McCormick; Zreiqat, Majed M; Paschold, Helmut W

    2018-01-01

    The aim of this study was to determine the effect of lead, cadmium, arsenic, toluene, and xylene exposure on hearing compared with noise exposures alone. Personnel at a shipyard (n = 1266) were divided into four exposure groups on the basis of concentrations: low metals/low solvents/high noise (reference group), high metals/high solvents/low noise, high metals/low solvents/high noise, and high metals/high solvents/high noise. Hearing changes occurring from the years 2004 to 2015 were analyzed. Hearing changes were significantly worse at 1000 Hz (P = 0.007), averaged across 2000 to 4000 Hz (P = 0.014), and averaged across 500 to 6000 Hz (P = 0.014) for the high metals/high solvent/high noise group compared with the low metals/low solvents/high noise only reference group. Simultaneous exposures classified as high for metals/solvents/noise appear to damage hearing more than exposure to noise alone. Hearing conservation programs should take into consideration combined exposures to metals, solvents, and noise, not simply exposure to noise.

  7. 33 CFR 334.1100 - San Pablo Bay, Carquinez Strait, and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare...

    Science.gov (United States)

    2010-07-01

    ... part of the Navy Yard, Mare Island, south of the causeway between the City of Vallejo and Mare Island... Commander, Mare Island Naval Shipyard, Vallejo, California, shall navigate, anchor or moor in this area. [26...

  8. Cancer risks and low-level radiation in U.S. shipyard workers

    International Nuclear Information System (INIS)

    Matanoski, Genevieve M.; Tonascia, James A.; Correa-Villasenor, Adolfo; Yates, Katherine C.; Fink, Nancy; Elliott, Elizabeth; Sanders, Bruce; Lantry, Deborah

    2008-01-01

    The risks for four cancers, leukemia, lymphopoietic cancers (LHC), lung cancer and mesothelioma, were studied in workers from shipyards involved in nuclear powered ship overhauls. The population represented a sample of all workers based on radiation dose at study termination. The final sample included 28,000 workers with ≥5.0 mSv, 10,462 workers with <5.0 mSv and 33,353 non-nuclear workers. Nuclear workers had lower mortality rates for leukemia and LHC than United States (US) white males but higher rates of lung cancer and a significant five-fold excess of mesothelioma. Dose-dependent analyses of risks in the high exposure group indicated that for each cancer the risk increased at exposures above 10.0 mSv. An internal comparison of workers with 50.0 mSv exposures to workers with exposures of 5.0-9.9 mSv indicated relative risks for leukemia of 2.41 (95% CI: 0.5, 23.8), for LHC, 2.94 (95% CI: 1.0, 12.0), for lung cancer, 1.26 (95% CI: 0.9, 1.9) and for mesothelioma, 1.61 (95% CI: 0.4, 9.7) for the higher exposure group. Except for LHC, these risks are not significant. However, the increasing risk with increasing exposure for these cancers, some of which are known to be related to radiation, suggests that low-level protracted exposures to gamma rays may be associated with these cancers. Other agents such as asbestos, which are common to shipyard work, may play a role especially in the risk of mesothelioma. Future follow up of the population would identify bounds on radiation risks for this population for comparison with similar risks estimated from other populations. (author)

  9. A Comprehensive Copper Compliance Strategy: Implementing Regulatory Guidance at Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility

    Science.gov (United States)

    2007-01-01

    species was not listed in the PHLP database (Bishop Museum, 1998). Personal observations by John Zardus (Kewalo Marine Laboratory, Honolulu, Hawaii...Ringwood, 1992). Specimens collected from an open coastal site by the University of Hawaii ( John Zardus ), did not survive the shipment (less than 24... John Ornellas, Randy Kido, and Rich Anderson from Code 106.3. The Shipyard Pearl Harbor Regional Dive Locker, Code 760, provided professional, high

  10. ANCIENT SHIPYARD ON TURKEY’S DANA ISLAND: ITS 3D MODELLING WITH PHOTOGRAMMETRY AND COMPUTER GRAPHICS

    Directory of Open Access Journals (Sweden)

    A. Denker

    2018-05-01

    Full Text Available Although a small island 2 km off the southern coast of Turkey, Dana Island offers a rich history which is likely to shed light upon the Dark Ages. Starting from 2015 our archaeological team discovered through continuing coastal and underwater excavations 274 shipsheds/slipways there. This discovery places Dana Island among the biggest shipyards of antiquity. The slipways varied in dimensions suitable for vessels of different sizes from small boats to large warships. Historical sources suggest that the name of the island may stem from Yadnana, Yadana or Adana which was mentioned in an Assyrian tablet of the 8th century BC, as an island in the vicinity of Cyprus. Archaeological evidence exists that shows Dana Island had played a significant role in seamanship activities in Levant starting from Neolithic times. A substantial part of the naval campaigns must have involved Dana Island which used be the biggest shipyard/naval base of the Eastern Mediterranean. A 3D model of the island has been made by using photogrammetry and computer graphics methods and simulations were executed to check the hypotheses related to the involvement of Dana Island in the major sea battles of antiquity, such as Sea Battle of Lade in 495 BC.

  11. Study of feasibility of detecting effects of low-dose radiation in shipyard workers. Final report, May 15-August 15, 1978

    International Nuclear Information System (INIS)

    Matanoski, G.M.

    1982-12-01

    There is very little information available on the chronic health effects from repeated low-level doses of radiation. This study examines the adequacy of determining radiation exposure doses in shipyard workers, the procedures used in the radiation control programs, and the feasibility of establishing an appropriate population of nuclear and non-nuclear shipyard workers for long-term studies of low-level radiation. The availability of records and the methods of population identification and of measurement of radiation dose were determined during initial visits to the yards. Personnel, industrial hygiene, radiation and medical records were examined for suitability, completeness and accuracy. It was necessary to assure that no possible errors or omissions in personnel and radiation records existed in order that the final data will have validity. Preliminary investigations on the methods of follow-up in the Portsmouth population and the time required for each procedure were also undertaken in order to have a better estimate of the total cost for a long term study

  12. Health and ecological risk-based characterization of soil and sediment contamination in shipyard with long-term use of DDT-containing antifouling paint

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Guanlin; Zhang, Chao [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Wu, Guanglong; Ding, Qiong [Foreign Economic Cooperation Office, Ministry of Environmental Protection of China, Beijing, 100035 (China); Wang, Shijie [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Li, Fasheng, E-mail: Lifs@craes.org.cn [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China)

    2013-04-15

    Dichlorodiphenyltrichloroethane (DDT) was a frequently occurring type of persistent organic environmental pollutant in China and DDT-containing antifouling paint could be the main contributor of DDT to shipyards and fishing harbors. A field survey was conducted in a shipyard in southern China to investigate the content and distribution of DDT in soil and sediments. Human health and screening-level ecological risk assessments were conducted for DDT contamination in soil and sediments and the results indicated that total DDT in all samples tested exceeded present advisory safe limits. Analysis of the composition and distribution implicated DDT-containing antifouling paint used for ship maintenance as an important source of DDT. Individual and cumulative health risks for residents exceeded the extra lifetime cancer risks of 10{sup −6} and 10{sup −5}, mainly from exposure to soil, ingestion and dermal contact. DDT in sediments is associated with a high level of toxicity for the benthic community when > 99% of samples exceed the threshold concentration likely to be responsible for effects and severe effects. Further risk control for DDT is required to ensure safety for human health, the benthic community and the environment. - Highlights: ► DDT ranked high concentration both in sediments and soil in a shipyard. ► Composition analysis indicated DDT antifouling paint was the main source. ► High loading DDT in sediments resulted in high probability of ecological risks. ► Potential health risks for residents were mainly from the exposure of ingestion.

  13. Health and ecological risk-based characterization of soil and sediment contamination in shipyard with long-term use of DDT-containing antifouling paint

    International Nuclear Information System (INIS)

    Guo, Guanlin; Zhang, Chao; Wu, Guanglong; Ding, Qiong; Wang, Shijie; Li, Fasheng

    2013-01-01

    Dichlorodiphenyltrichloroethane (DDT) was a frequently occurring type of persistent organic environmental pollutant in China and DDT-containing antifouling paint could be the main contributor of DDT to shipyards and fishing harbors. A field survey was conducted in a shipyard in southern China to investigate the content and distribution of DDT in soil and sediments. Human health and screening-level ecological risk assessments were conducted for DDT contamination in soil and sediments and the results indicated that total DDT in all samples tested exceeded present advisory safe limits. Analysis of the composition and distribution implicated DDT-containing antifouling paint used for ship maintenance as an important source of DDT. Individual and cumulative health risks for residents exceeded the extra lifetime cancer risks of 10 −6 and 10 −5 , mainly from exposure to soil, ingestion and dermal contact. DDT in sediments is associated with a high level of toxicity for the benthic community when > 99% of samples exceed the threshold concentration likely to be responsible for effects and severe effects. Further risk control for DDT is required to ensure safety for human health, the benthic community and the environment. - Highlights: ► DDT ranked high concentration both in sediments and soil in a shipyard. ► Composition analysis indicated DDT antifouling paint was the main source. ► High loading DDT in sediments resulted in high probability of ecological risks. ► Potential health risks for residents were mainly from the exposure of ingestion

  14. Operational Shock Complexity Theory

    Science.gov (United States)

    2005-05-26

    Theory : Recommendations For The National Strategy To Defeat Terrorism.” Student Issue Paper, Center for Strategic Leadership , US Army War College, July...Lens of Complexity Theory : Recommendations For The National Strategy To Defeat Terrorism.” (Student Issue Paper, Center for Strategic Leadership , US...planners managed to cause confusion in the enemy’s internal model by operating in an unexpected manner. 140 Glenn E. James, “Chaos Theory : The

  15. Comparison of asbestos-associated respiratory disease by medical examination between shipyard retiree and workers of active service with asbestos exposure

    International Nuclear Information System (INIS)

    Ikeda, Tooru; Yoshida, Toshiaki; Fujisawa, Hiroyuki; Tanaka, Ayako; Ikeda, Hideki; Kawano, Hiroaki

    2009-01-01

    We examined 407 shipyard workers with asbestos exposure (406 men and one woman; mean age, 60.4 years) for asbestos-associated respiratory disease using the multi-slice chest CT in addition to the regular examinations. After the examination, workers with suspicion of malignancy by the multi-slice CT, other examinations including biopsy were performed to make the final diagnosis. We divided these people into two groups as follows; retiree (133 cases, 132 men and one woman; mean age, 65.9 years) and workers of shipyard active service (274 cases, all men, mean age, 57.6 years). We compared the incidence of asbestos-associated respiratory disease, age, incubation time and work period at asbestos exposure in these two groups. 97 of 133 (72.9%) retired workers and 94 of 274 (34.4%) active service had asbestos-associated respiratory disease as follows: pleural plaque without calcification, 25 cases (18.8%) (retired) and 35 (12.8%) (active service); pleural plaque with calcification, 65 (48.7%) and 51 (18.6%); diffuse pleural thickening, 0 (0%) and 0 (0%); asbestosis, 5 (3.8%) and 6 (2.2%); lung cancer, 1 case (0.8%) and 2 cases (0.7%) and malignant pleural mesothelioma 1 case (0.8%) and none (0%). The rate of workers with total asbestos-associated respiratory disease in the retired group was significantly higher than that in active service (P<0.01). Especially pleural plaque with calcification were detected more in shipyard retired workers than active service workers. The incidence of pleural plaque is related to age and incubation time but not to work period at asbestos exposure. (author)

  16. Norm estimates of complex symmetric operators applied to quantum systems

    International Nuclear Information System (INIS)

    Prodan, Emil; Garcia, Stephan R; Putinar, Mihai

    2006-01-01

    This paper communicates recent results in the theory of complex symmetric operators and shows, through two non-trivial examples, their potential usefulness in the study of Schroedinger operators. In particular, we propose a formula for computing the norm of a compact complex symmetric operator. This observation is applied to two concrete problems related to quantum mechanical systems. First, we give sharp estimates on the exponential decay of the resolvent and the single-particle density matrix for Schroedinger operators with spectral gaps. Second, we provide new ways of evaluating the resolvent norm for Schroedinger operators appearing in the complex scaling theory of resonances

  17. Environmental complexity of a port: Evidence from circulation of the water masses, and composition and contamination of bottom sediments.

    Science.gov (United States)

    Cutroneo, L; Carbone, C; Consani, S; Vagge, G; Canepa, G; Capello, M

    2017-06-15

    Ports are complex environments due to their complicated geometry (quays, channels, and piers), the presence of human activities (vessel traffic, shipyards, industries, and discharges), and natural factors (stream and torrent inputs, sea action, and currents). Taking these factors into consideration, we have examined the marine environment of a port from the point of view of the circulation of the water masses, hydrological characteristics, distribution of the sediment grain-size, mineralogical characteristics, and metal concentrations of the bottom sediments. Our results show that, in the case of the Port of Genoa (north-western Italy), the impact of human activities (such as a coal power-plant, oil depots, shipyards, dredging of the bottom sediments, etc.), natural processes (such as currents, fresh water and sediment inputs from the torrents), and the morphology of the basin, are important factors in the sediment, water, and metal distributions that have given rise to a complex environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Making Stability Operations Less Complex While Improving Interoperability

    National Research Council Canada - National Science Library

    Chaum, Erik; Christman, Gerard

    2008-01-01

    Military support for stability, security, transition, and reconstruction as well as humanitarian assistance / disaster relief operations is as important and complex an endeavor as is major combat operations...

  19. Implementation of the environmental management plan for the dismantling of nuclear powered submarines at Zvezdochka Shipyard, Russia

    International Nuclear Information System (INIS)

    Washer, M.; Cull, M.; Crocker, C.; Ivanov, V.; Shepurev, A.; Khan, B.U.Z.; Lee, M.; Gerchikov, M.

    2007-01-01

    Department of Foreign Affairs and International Trade Canada is funding the dismantling of twelve nuclear powered submarines (NPS) from the Russian Federation's Northern Fleet as part of the Global Partnership Initiative against weapons and materials of mass destruction. In this paper, work performed by Nuclear Safety Solutions Ltd. and its collaborators in support of these activities is described. First, an environmental impact assessment of towing and dismantling NPS in the Kola Peninsula, and the Barents and White Seas was performed. The assessed activities included: towing of NPS from Naval Bases in Murmansk Region to the Zvezdochka shipyard (Severodvinsk); defuelling of onboard reactors; dismantling of NPS at Zvezdochka; and waste management. The assessment helped identify mitigation measures that could prevent the occurrence of adverse effects. Next, the project team defined and implemented an environmental management plan (EMP) based on the shipyard's existing environmental policy and the mitigating measures identified during the environmental assessment. Specific targets were defined to track the progress of the EMP implementation, and are described in this paper. During the study period, three Victor Class NPS were dismantled at Zvezdochka. The major benefits realized include: removal and spent nuclear fuel assemblies; treatment/decontamination of liquid and solid radioactive waste; and the cultivation of collaboration between Russian and Western expertise. (author)

  20. Implementation of the environmental management plan for the dismantling of nuclear powered submarines at Zvezdochka shipyard, Russia

    International Nuclear Information System (INIS)

    Washer, M.; Cull, M.; Crocker, C.; Ivanov, V.; Shepurev, A.; Khan, B.U.Z.; Lee, M.; Gerchikov, M.

    2008-01-01

    Department of Foreign Affairs and International Trade Canada is funding the dismantling of twelve nuclear powered submarines (NPS) from the Russian Federation's Northern Fleet as part of the Global Partnership Initiative against weapons and materials of mass destruction. In this paper, work performed by Nuclear Safety Solutions Ltd. and its collaborators in support of these activities is described. First, an environmental impact assessment of towing and dismantling NPS in the Kola Peninsula, and the Barents and White Seas was performed. The assessed activities included: towing of NPS from Naval Bases in Murmansk Region to the Zvezdochka shipyard (Severodvinsk); defuelling of onboard reactors; dismantling of NPS at Zvezdochka; and waste management. The assessment helped identify mitigation measures that could prevent the occurrence of adverse effects. Next, the project team defined and implemented an environmental management plan (EMP) based on the shipyard's existing environmental policy and the mitigating measures identified during the environmental assessment. Specific targets were defined to track the progress of the EMP implementation, and are described in this paper. During the study period, three Victor Class NPS were dismantled at Zvezdochka. The major benefits realized include: removal of spent nuclear fuel assemblies; treatment/ decontamination of liquid and solid radioactive waste; and the cultivation of collaboration between Russian and Western expertise. (author)

  1. Project communication management in complex environments

    CERN Document Server

    Ying, Zhong

    2014-01-01

    This unique book that deals with project communication management in complex environments, taking a leaf from China’s experience with a major earthquake in Sichuan, would be a timely contribution to fill this lacuna. Readers would be able to understand how companies and organizations that are unprepared for crisis management would react to their detriment. The lessons provided in this book are the only one of its kind to highlight the lessons for companies and organizations to prepare themselves for successful project communication management through the complexity-informed framework. Although the book is written by two building professionals, the concepts and lessons presented are generic and equally applicable for businesses outside of the construction industry; for example, for airports, resorts, hotels, shipyards, etc.

  2. The relationship between automation complexity and operator error

    International Nuclear Information System (INIS)

    Ogle, Russell A.; Morrison, Delmar 'Trey'; Carpenter, Andrew R.

    2008-01-01

    One of the objectives of process automation is to improve the safety of plant operations. Manual operation, it is often argued, provides too many opportunities for operator error. By this argument, process automation should decrease the risk of accidents caused by operator error. However, some accident theorists have argued that while automation may eliminate some types of operator error, it may create new varieties of error. In this paper we present six case studies of explosions involving operator error in an automated process facility. Taken together, these accidents resulted in six fatalities, 30 injuries and hundreds of millions of dollars in property damage. The case studies are divided into two categories: low and high automation complexity (three case studies each). The nature of the operator error was dependent on the level of automation complexity. For each case study, we also consider the contribution of the existing engineering controls such as safety instrumented systems (SIS) or safety critical devices (SCD) and explore why they were insufficient to prevent, or mitigate, the severity of the explosion

  3. Comparing the operators' behavior in conducting emergency operating procedures with the complexity of procedural steps

    International Nuclear Information System (INIS)

    Park, Jin Kyun; Jung, Won Dea

    2003-01-01

    Many kinds of procedures have been used to reduce the operators' workload throughout various industries. However, significant portion of accidents or incidents was caused by procedure related human errors that are originated from non-compliance of procedures. According to related studies, several important factors for non-compliance behavior have been identified, and one if them is the complexity of procedures. This means that comparing the change of the operators' behavior with the complexity of procedures may be meaningful for investigating plausible reasons for the operators' non-compliance behavior. In this study, emergency training records were collected using a full scope simulator in order to obtain data related to the operators' non-compliance behavior. And then, collected data are compared with the complexity of procedural steps. As the result, two remarkable relationships are found, which indicate that the operators' behavior could be reasonably characterized by the complexity of procedural steps. Thus, these relationships can be used as meaningful clues not only to scrutinize the reason of non-compliance behavior but also to suggest appropriate remedies for the reduction of non-compliance behavior that can result in procedure related human errors

  4. Illness episodes and A-bomb exposure: a study of absenteeism among Nagasaki Mitsubishi Shipyard workers

    Energy Technology Data Exchange (ETDEWEB)

    Komatsu, Teizo; Hashimoto, Takeaki; Onishi, Shigeyuki; Fujisawa, Hideo

    1963-01-23

    With rate, frequency, and length of absence as indices, a study of the relation between A-bomb exposure and health status was conducted among male workers of the Nagasaki Mitsubishi Shipyard. The following results were obtained: absence rate of the group located 0 to 1999 m from the hypocenter was approximately 0.20 which is practically the same as the rates of the other comparison groups. Within the 0 to 1999 m group, the absence rate of the group with symptoms was higher than that of the group without symptoms. This was not statistically significant, and was ascribed to the effect of absence proneness in the group with symptoms. The absence rate showed a tendency to increase gradually with exposure dose. Within the 0 to 1999 m group, the hospitalization rate of the group with symptoms was significantly lower than that of the group without symptoms. The absence rate for diseases of the digestive system was high among those located 3000 to 3999 m from the hypocenter as well as those not in the city ATB, but in the 0 to 1000 m group the rate was high for diseases of the respiratory system. Between the 3 comparison groups no marked difference was noted in the prevalence rate of diseases which are possibly related to radiation. Of the 52 individuals who had been absent from duty 4 or more days on account of illness during the 2-year period at the Nagasaki Mitsubishi Shipyard, corresponding findings were recorded at the ABCC clinic for 25 (48.1%). 9 references, 2 figures, 18 tables.

  5. Women Apprentices in Hawaii: Characteristics of Females Registered with Pearl Harbor Naval Shipyard and the Hawaii Department of Labor and Industrial Relations.

    Science.gov (United States)

    White, Barbara

    A study examined the characteristics, educational training, and background experiences of women who entered apprenticeship in Hawaii during the period from July 1, 1974, through June 30, 1982. Survey instruments were completed by 118 of 243 female apprentices originally contacted--58 women registered with Pearl Harbor Naval Shipyard and 60 women…

  6. Pb(II) and Cd(II) removal from aqueous solution, shipyard wastewater, and landfill leachate by modified Rhizopus oryzae biomass

    Science.gov (United States)

    Naeimi, Behrouz; Foroutan, Rauf; Ahmadi, Bahram; Sadeghzadeh, Farzaneh; Ramavandi, Bahman

    2018-04-01

    This study was designed to remove Pb(II) and Cd(II) from aqueous solution, shipyard wastewater, and sanitary landfill leachate using an alkaline-modified Rhizopus oryzae biomass. According to the Fourier transform infrared test, different functional groups like O–H, N–H, C=O, and P–O were detected in the bioadsorbent. The x-ray fluorescence (XRF) analysis showed that CaO, P2O3, and SO3 oxides have the highest content in the bioadsorbent. The surface area of modified Rhizopus oryzae was obtained as 20.32 m2 g‑1. The effect of initial pH, temperature, contact time, and bioadsorbent dose on the metals removal was discussed. At optimal conditions, maximum Pb(II) and Cd(II) removal was obtained 95.66% and 94.55%, respectively. Freundlich model was well- accurately described the equilibrium data. Among four studied models, the pseudo-second-order was better able to describe the kinetic behavior of the bioadsorption process. The amount of enthalpy, free energy of Gibbs, and entropy parameters indicated that the bioadsorption process of studied heavy metals is negative, exothermic, and spontaneous. The amount of heavy metals in a shipyard wastewater and sanitary landfill leachate was significantly decreased by using the developed bioadsorbent.

  7. Risk factors for sickness absence due to low back pain and prognostic factors for return to work in a cohort of shipyard workers

    NARCIS (Netherlands)

    E.C. Alexopoulos (Evangelos); E.C. Konstantinou (Eleni); G. Bakoyannis (Giorgos); D. Tanagra (Dimitra); A. Burdorf (Alex)

    2008-01-01

    textabstractThe purpose of this study was to determine risk factors for the occurrence of sickness absence due to low back pain (LBP) and to evaluate prognostic factors for return to work. A longitudinal study with 1-year follow-up was conducted among 853 shipyard workers. The cohort was drawn

  8. Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

    International Nuclear Information System (INIS)

    Park, Jinkyun; Jeong, Kwangsup; Jung, Wondea

    2005-01-01

    In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operators' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration

  9. Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jinkyun [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of)]. E-mail: kshpjk@kaeri.re.kr; Jeong, Kwangsup [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of); Jung, Wondea [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of)

    2005-08-01

    In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operators' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration.

  10. Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Jinkyun Park; Kwangsup Jeong; Wondea Jung [Korea Atomic Energy Research Institute, Taejon (Korea). Integrated Safety Assessment Division

    2005-08-15

    In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operator' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration. (author)

  11. Investigation of bias in a study of nuclear shipyard workers

    International Nuclear Information System (INIS)

    Greenberg, E.R.; Rosner, B.; Hennekens, C.; Rinsky, R.; Colton, T.

    1985-01-01

    The authors examined discrepant findings between a 1978 proportional mortality study and a 1981 cohort study of workers at the Portsmouth, New Hampshire Naval Shipyard to determine whether the healthy worker effect, selection bias, or measurement bias could explain why only the proportional mortality study found excess cancer deaths among nuclear workers. Lower mortality from noncancer causes in nuclear workers (the healthy worker effect) partly accounted for the observed elevated cancer proportional mortality. More important, however, was measurement bias which occurred in the proportional mortality study when nuclear workers who had not died of cancer were misclassified as not being nuclear workers based on information from their next of kin, thereby, creating a spurious association. Although the proportional mortality study was based on a small sample of all deaths occuring in the cohort, selection bias did not contribute materially to the discrepant results for total cancer deaths. With regard to leukemia, misclassification of occupation in the proportional mortality study and disagreement about cause of death accounted for some of the reported excess deaths. 16 references, 4 tables

  12. Operational State Complexity of Deterministic Unranked Tree Automata

    Directory of Open Access Journals (Sweden)

    Xiaoxue Piao

    2010-08-01

    Full Text Available We consider the state complexity of basic operations on tree languages recognized by deterministic unranked tree automata. For the operations of union and intersection the upper and lower bounds of both weakly and strongly deterministic tree automata are obtained. For tree concatenation we establish a tight upper bound that is of a different order than the known state complexity of concatenation of regular string languages. We show that (n+1 ( (m+12^n-2^(n-1 -1 vertical states are sufficient, and necessary in the worst case, to recognize the concatenation of tree languages recognized by (strongly or weakly deterministic automata with, respectively, m and n vertical states.

  13. From ship-yard to campus. Rotterdamse Droogdok Maatschappij; Van scheepswerf naar campus. Rotterdamse Droogdok Maatschappij

    Energy Technology Data Exchange (ETDEWEB)

    Sosef, J.P. [Wolter en Dros, Rotterdam (Netherlands); Van der Schee, W.G. [Wolter en Dros, Amersfoort (Netherlands)

    2011-03-15

    The industrial buildings and halls of an old ship-yard in the Netherlands of the Rotterdam Droogdok Maatschappij (a shipbuilding and repair company in Rotterdam, Netherlands) has been renovated and transferred into educational facilities and buildings for small-scale businesses. [Dutch] Waar tientallen jaren geleden zware mokerslagen door de hallen galmden, staan nu studenten geconcentreerd gebogen over de fijnste technieken. De voormalige machinehallen van de Rotterdamse Droogdok Maatschappij (RDM) in Rotterdam huisvesten tegenwoordig onderwijsinstellingen en kleinschalige innovatieve bedrijven. Het middelpunt van deze RDM-Campus is het Innovation Dock. Het was een uitdaging om in de oude tochtige hallen een behaaglijk binnenklimaat te creeren voor onderwijsdoeleinden en kantoren.

  14. Complex matrix multiplication operations with data pre-conditioning in a high performance computing architecture

    Science.gov (United States)

    Eichenberger, Alexandre E; Gschwind, Michael K; Gunnels, John A

    2014-02-11

    Mechanisms for performing a complex matrix multiplication operation are provided. A vector load operation is performed to load a first vector operand of the complex matrix multiplication operation to a first target vector register. The first vector operand comprises a real and imaginary part of a first complex vector value. A complex load and splat operation is performed to load a second complex vector value of a second vector operand and replicate the second complex vector value within a second target vector register. The second complex vector value has a real and imaginary part. A cross multiply add operation is performed on elements of the first target vector register and elements of the second target vector register to generate a partial product of the complex matrix multiplication operation. The partial product is accumulated with other partial products and a resulting accumulated partial product is stored in a result vector register.

  15. A Discussion on Risk in Complex Operational Settings

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, K., E-mail: ken.ellis@wano.org [WANO, London (United Kingdom)

    2014-10-15

    Full text: Many apparatus today are complicated in that they consist of many components. The risk associated with these complicated apparatus is a product of their unreliable system components and sub-components. The components are a collection of inter-related individual components/ sub-components that can be correlated in a direct cause and effect manner and thus failures can be historically retraced or predicted. Once the confines of the complicated apparatus is extended to include such inputs as humans operating the equipment, man-machine interfaces, multiple processes surrounding the operation of the apparatus, etc., the whole system becomes complex. Complex systems are based on interdependencies versus dependencies, and risk becomes a product of improperly aligned or poorly integrated activities. Cause and effect becomes more loosely coupled and both path and circumstance dependent. To better understand and improve our defence in depth strategies we need to better understand and discuss complex systems and hence allow better erection of protective barriers. (author)

  16. Product variety, product complexity and manufacturing operational performance: A systematic literature review

    DEFF Research Database (Denmark)

    Trattner, Alexandria Lee; Hvam, Lars; Herbert-Hansen, Zaza Nadja Lee

    Manufacturing in the twenty-first century has been wrought with the struggle to satisfy the rising demand for greater product variety and more complex products while still maintaining efficient manufacturing operations. However, the literature lacks an overview of which operational performance...... measures are most affected by increased variety and complexity. This study presents a systematic literature review of the recent scholarly literature on variety, complexity and manufacturing operational performance (MOP). Results show that product variety has a consistently negative relationship with MOP...... across different time, cost, quality and flexibility measures while product complexity lacks evidence of strong relationships with MOP measures....

  17. Technical Feasibility Study for Deployment of Ground-Source Heat Pump Systems: Portsmouth Naval Shipyard -- Kittery, Maine

    Energy Technology Data Exchange (ETDEWEB)

    Hillesheim, M.; Mosey, G.

    2014-11-01

    The U.S. Environmental Protection Agency (EPA) Office of Solid Waste and Emergency Response, in accordance with the RE-Powering America's Lands initiative, engaged the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to conduct feasibility studies to assess the viability of developing renewable energy generating facilities on contaminated sites. Portsmouth Naval Shipyard (PNSY) is a United States Navy facility located on a series of conjoined islands in the Piscataqua River between Kittery, ME and Portsmouth, NH. EPA engaged NREL to conduct a study to determine technical feasibility of deploying ground-source heat pump systems to help PNSY achieve energy reduction goals.

  18. Searching for Order Within Chaos: Complexity Theorys Implications to Intelligence Support During Joint Operational Planning

    Science.gov (United States)

    2017-06-09

    joint operational planning . 15. SUBJECT TERMS Complexity Theory , Complex Systems Theory , Complex Adaptive Systems, Dynamical Systems, Joint...complexity theory to analyze military problems and increase joint staff understanding of the operational environment during joint operational planning ?” the...13). Complex Systems Theory : “the study of the behavior of [complex adaptive] systems” (Ilachinski 2004, 4). For the purpose of this thesis there is

  19. Remarks on the Schroedinger operator with singular complex potentials

    International Nuclear Information System (INIS)

    Brezis, Haim; Kato, Tosio

    1979-01-01

    To describe this method in a simple case Section 2 begin with real valued potentials. The main results in Section 2 are essentially known. In Section 3 the case of complex potentials is exposed. Schroedinger operators with complex potentials have been studied by Nelson. This results were extended. Here more general singularities are exposed

  20. Managing complexity challenges for industrial engineering and operations management

    CERN Document Server

    López-Paredes, Adolfo; Pérez-Ríos, José

    2014-01-01

    This book presents papers by experts in the field of Industrial Engineering, covering topics in business strategy; modelling and simulation in operations research; logistics and production; service systems; innovation and knowledge; and project management. The focus of operations and production management has evolved from product and manufacturing to the capabilities of firms and collaborative management. Nowadays, Industrial Engineering is concerned with the study of how to design, modify, control and improve the performance of complex systems. It has extended its scope to any physical landscape populated by social agents. This raises a major challenge to Industrial Engineering:  managing complexity. This volume shows how experts are dealing with this challenge.

  1. Contingent Valuation Method and the beta model: an accounting economic vision for environmental damage in Atlântico Sul Shipyard

    Directory of Open Access Journals (Sweden)

    Silvana Karina de Melo Travassos

    2018-02-01

    Full Text Available ABSTRACT The objective of this paper is to apply the beta model as an alternative to the Valuation Method in order to estimate the environmental asset Willingness to Pay (WTP so that the Tribunal de Contas do Estado de Pernambuco (TCE/PE can supervise the Atlântico Sul Shipyard (ASS as a negative environmental externality, which is discussed here from an accounting perspective. Our methodology is exploratory, and the beta regression model was used in the contingent valuation to estimate the environmental asset. The results allowed estimating the value of the Ipojuca mangrove at US$ 134,079,793.50, and the value of the environmental damage caused by the shipyard to the public asset was valued at US$ 61,378,155.37. This latter value is object of interest to the inspection body. However, the final estimated value of the Ipojuca mangrove prompts a discussion about the implications from an accounting point of view, such as the attribution of monetary value to a public asset that does not have a financial value, problems regarding the conceptualization and valuation of public assets for governmental patrimony. It is concluded that the beta regression model to estimate the WTP for contingent valuation will serve as a contribution to the research on accounting measurement techniques for public assets.

  2. An updated historical cohort mortality study of workers exposed to asbestos in a refitting shipyard, 1947-2007.

    Science.gov (United States)

    Tomioka, Kimiko; Natori, Yuji; Kumagai, Shinji; Kurumatani, Norio

    2011-12-01

    To evaluate the long-term health effects of occupational asbestos exposure, an updated historical cohort mortality study of workers at a refitting shipyard was undertaken. The cohort consisted of 249 male ship repair workers (90 laggers, 159 boiler repairers). To determine relative excess mortality, standardized mortality ratios (SMRs) were calculated using mortality rates among the Japanese male population. Mortality follow-up of study subjects was performed for the period from 1947 till the end of 2007. We identified the vital status of 87 (96.7%) laggers and 150 (94.3%) boiler repairers. Of these, 63 (72.4%) and 95 (63.3%), respectively, died. Laggers, who had handled asbestos materials directly, showed a significantly elevated SMR of 2.64 (95% confidence interval [CI]: 1.06-5.44) for lung cancer and 2.49 (95% CI: 1.36-4.18) for nonmalignant respiratory diseases. Boiler repairers, who had many opportunities for secondary exposure to asbestos and a few for direct exposure, showed no significant elevation in SMR for lung cancer but a significantly elevated SMR of 1.78 (95% CI: 1.06-2.81) for nonmalignant respiratory diseases. In an analysis according to duration of employment, there was a significantly elevated SMR of nonmalignant respiratory diseases in the longer working years group. Among workers from both jobs, no deaths caused by mesothelioma in addition to those in the original study were found and no subject died from larynx cancer. This updated study confirmed a significant excess of asbestos-related mortality from diseases such as lung cancer and nonmalignant respiratory diseases among workers in a refitting shipyard in Japan.

  3. STABILITY OF WHEELED VEHICLES AS COMPLEX OPERATIONAL PROPERTIES

    Directory of Open Access Journals (Sweden)

    N. Artemov

    2011-01-01

    Full Text Available Different views on the definition of «stability of wheeled vehicles» are considered and the author’s own definition is offered. A version of the structure of stability properties as a complex op-erational property is offered.

  4. Explicit resolutions for the complex of several Fueter operators

    Science.gov (United States)

    Bureš, Jarolim; Damiano, Alberto; Sabadini, Irene

    2007-02-01

    An analogue of the Dolbeault complex is introduced for regular functions of several quaternionic variables and studied by means of two different methods. The first one comes from algebraic analysis (for a thorough treatment see the book [F. Colombo, I. Sabadini, F. Sommen, D.C. Struppa, Analysis of Dirac systems and computational algebra, Progress in Mathematical Physics, Vol. 39, Birkhäuser, Boston, 2004]), while the other one relies on the symmetry of the equations and the methods of representation theory (see [F. Colombo, V. Souček, D.C. Struppa, Invariant resolutions for several Fueter operators, J. Geom. Phys. 56 (2006) 1175-1191; R.J. Baston, Quaternionic Complexes, J. Geom. Phys. 8 (1992) 29-52]). The comparison of the two results allows one to describe the operators appearing in the complex in an explicit form. This description leads to a duality theorem which is the generalization of the classical Martineau-Harvey theorem and which is related to hyperfunctions of several quaternionic variables.

  5. The operative management of children with complex perianal Crohn's disease.

    Science.gov (United States)

    Seemann, Natashia M; King, Sebastian K; Elkadri, Abdul; Walters, Thomas; Fish, Joel; Langer, Jacob C

    2016-12-01

    Perianal Crohn's disease (PCD) can affect both quality of life and psychological wellbeing. A subset of pediatric patients with complex PCD require surgical intervention, although appropriate timing and treatment regimens remain unclear. This study aimed to describe a large pediatric cohort in a tertiary center to determine the range of surgical management in children with complex PCD. A retrospective review of children requiring operative intervention for PCD over 13 years (2002-2014) was performed. PCD was divided into simple and complex based on the type of surgical procedure, and the two groups were compared. The 57 children were divided into two groups: the simple group (N=43) underwent abscess drainage ± seton insertion alone, and the complex group (N=14) underwent loop ileostomy ± more extensive surgery. In the complex group, females were more predominant (57% of complex vs 30% of simple), and the average age at diagnosis was lower. Anti-TNF therapy was utilized in 79.1% of simple and 100% of complex PCD. All 14 complex patients underwent a defunctioning ileostomy, with 7 requiring further operations (subtotal colectomy=4, proctocolectomy ± anal sparing=5, plastic surgery reconstruction with perineal flap/graft=4). Complex PCD represents a small but challenging subset of patients in which major surgical intervention may be necessary to alleviate the symptoms of this debilitating condition. retrospective case study with no control group - level IV. Copyright © 2016 Elsevier Inc. All rights reserved.

  6. 2011 ESTCP Live Site Demonstrations, Vallejo CA, ESTCP MR-1165, Demonstration Data Report, Former Mare Island Naval Shipyard, MTADS Discrimination Array, (TEMTADS) Survey

    Science.gov (United States)

    2012-04-05

    Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/6110--12-9397 2011 ESTCP Live Site Demonstrations Vallejo , CA ESTCP MR-1165 Demonstration...b. ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT 2011 ESTCP Live Site Demonstrations Vallejo , CA ESTCP MR-1165 Demonstration...Hertz IVS Instrument Verification Strip (f)MINSY (former) Mare Island Naval Shipyard, located in Vallejo , CA MR Munitions Response MTADS Multi-sensor

  7. AN EFFECTIVE RISK-PREVENTIVE MODEL PROPOSAL FOR OCCUPATIONAL ACCIDENTS AT SHIPYARDS

    Directory of Open Access Journals (Sweden)

    Ozge Acuner

    2016-03-01

    Full Text Available According to the statistics of occupational accidents, it is observed that the number of accidents occurred in shipbuilding industry is high and the rate of deaths and serious injuries among these accidents is higher than in other industries. However, the number of the studies to prevent these accidents in both industrial and scientific practices is considerably low. Therefore, the objective of this study is to develop an efficient risk preventive model in accordance with occupational health and safety regulations for industrial organizations. The approach proposed in this study differs from those described in the literature, because it is based on fuzzy set theory in order to cope with uncertainties on probability and severity definitions in terms of occupational health and safety. Furthermore, in this paper, risk severity is considered in terms of harm to worker, harm to environment, and harm to hardware, whereas in the literature, risk severity is generally considered solely in terms of only harm to worker. Then, risk magnitude is obtained by utilizing fuzzy inference system. The proposed approach is applied to a shipyard located in the Marmara Region in order to illustrate the applicability of the model.

  8. Complex operator method of the hydrogen atom

    International Nuclear Information System (INIS)

    Jiang, X.

    1989-01-01

    Frequently the hydrogen atom eigenvalue problem is analytically solved by solving a radial wave equation for a particle in a Coulomb field. In this article, complex coordinates are introduced, and an expression for the energy levels of the hydrogen atom is obtained by means of the algebraic solution of operators. The form of this solution is in accord with that of the analytical solution

  9. Case-control study of leukemia at a naval nuclear shipyard

    International Nuclear Information System (INIS)

    Stern, F.B.; Waxweiler, R.A.; Beaumont, J.J.

    1986-01-01

    A matched case-control study was conducted of 53 leukemia deaths and of 212 controls within a previously studied cohort of 24,545 on-shore workers employed between January 1, 1952 and August 15, 1977 at the Portsmouth (New Hampshire) Naval Shipyard. The study sought to ascertain a priori whether there was an association between leukemia deaths and occupational exposure to either ionizing radiation or organic solvents. To obtain information on individual exposures, radiation dose histories and detailed work histories by job and shop were evaluated for each subject. No statistically significant associations were found either between ionizing radiation or presumed solvent exposure and myelogenous or lymphatic leukemia. However, when specific job categories and shops were examined without benefit of a priori hypotheses, two occupations, electrician and welder, were found to be associated with leukemia. For electricians, the Mantel-Haenszel odds ratio (ORMH) was significantly elevated for all leukemias (ORMH = 3.00, 95% confidence interval (CI) = 1.29-6.98), particularly for lymphatic leukemia (ORMH = 6.00, 95% CI = 1.47-24.45). For welders, the odds ratio was not significantly elevated for all leukemias (ORMH = 2.25, 95% CI = 0.92-5.53), but was significantly elevated for myeloid leukemia (ORMH = 3.83, 95% CI = 1.28-11.46). These findings persisted when potential confounders were adjusted by means of a conditional logistic regression model

  10. A Simulation for Managing Complexity in Sales and Operations Planning Decisions

    Science.gov (United States)

    DuHadway, Scott; Dreyfus, David

    2017-01-01

    Within the classroom it is often difficult to convey the complexities and intricacies that go into making sales and operations planning decisions. This article describes an in-class simulation that allows students to gain hands-on experience with the complexities in making forecasting, inventory, and supplier selection decisions as part of the…

  11. [Operative treatment for complex tibial plateau fractures].

    Science.gov (United States)

    Song, Qi-Zhi; Li, Tao

    2012-03-01

    To explore the surgical methods and clinical evaluation of complex tibial plateau fractures resulted from high-energy injuries. From March 2006 to May 2009,48 cases with complex tibial plateau fractures were treated with open reduction and plate fixation, including 37 males and 11 females, with an average age of 37 years (ranged from 18 to 63 years). According to Schatzker classification, 16 cases were type IV, 20 cases type V and 12 cases type VI. All patients were examined by X-ray flim and CT scan. The function of knee joint were evaluated according to postoperative follow-up X-ray and Knee Merchant Rating. Forty-eight patients were followed up with a mean time of 14 months. According to Knee Merchant Rating, 24 cases got excellent results, 16 cases good, 6 cases fair and 2 cases poor. Appropriate operation time, anatomical reduction, suitable bone graft and reasonable rehabilitation exercises can maximally recovery the function of knee joint.

  12. Supplemental design requirements document solid waste operations complex

    International Nuclear Information System (INIS)

    Ocampo, V.P.; Boothe, G.F.; Broz, D.R.; Eaton, H.E.; Greager, T.M.; Huckfeldt, R.A.; Kooiker, S.L.; Lamberd, D.L.; Lang, L.L.; Myers, J.B.

    1994-11-01

    This document provides additional and supplemental information to the WHC-SD-W112-FDC-001, WHC-SD-W113-FDC-001, and WHC-SD-W100-FDC-001. It provides additional requirements for the design and summarizes Westinghouse Hanford Company key design guidance and establishes the technical baseline agreements to be used for definitive design common to the Solid Waste Operations Complex (SWOC) Facilities (Project W-112, Project W-113, and WRAP 2A)

  13. Time cycle calculation procedure for the special crew during the mining mobile machine complex operation

    International Nuclear Information System (INIS)

    Shmurygin, V; Lukyanov, V; Maslovsky, A

    2015-01-01

    The relevance of the research is specified by the necessity to optimize the delft mobile tunneling equipment operation. Target of the research is tunneling time cycle justification for the special crew during the mining mobile machine complex operation. Methods of the research included the consideration of operation organization schemes in the drifting face and effective use of the mobile equipment during mine exploratory working operations. Time cycle calculation procedures for major processes have been considered. This has been done for the special crew during the mobile machine complex operations for several working faces and various organization schemes

  14. The operators' non-compliance behavior to conduct emergency operating procedures--comparing with the work experience and the complexity of procedural steps

    International Nuclear Information System (INIS)

    Park, Jinkyun; Jung, Wondea

    2003-01-01

    Many kinds of procedures have been used to reduce the operators' workload throughout various industries, such as in the aviation, the chemical and the nuclear industry. It is remarkable that, however, significant portion of accidents or incidents was caused by procedure related human error due to non-compliance of procedures. In this study, to investigate the operators' non-compliance behavior, emergency-training records were collected using a full scope simulator. And three types of the operators' behavior (such as strict adherence, skipping redundant actions and modifying action sequences) observed from collected emergency training records were compared with both their work experience and the complexity of procedural steps. As the results, three remarkable relationships are obtained. They are: (1) the operators who have an intermediate work experience seem to frequently adopt non-compliance behavior to conduct the procedural steps, (2) the operators seem to frequently adopt non-compliance behavior to conduct the procedural steps that have an intermediate procedural complexity, and (3) the senior reactor operators seem to accommodate their non-compliance behavior based on the complexity of procedural steps. Therefore, it is expected that these relationships can be used as meaningful clues not only to scrutinize the reason for non-compliance behavior but also to suggest appropriate remedies for the reduction of non-compliance behavior that can result in procedure related human error

  15. Complexity analysis of the Next Gen Air Traffic Management System: trajectory based operations.

    Science.gov (United States)

    Lyons, Rhonda

    2012-01-01

    According to Federal Aviation Administration traffic predictions currently our Air Traffic Management (ATM) system is operating at 150 percent capacity; forecasting that within the next two decades, the traffic with increase to a staggering 250 percent [17]. This will require a major redesign of our system. Today's ATM system is complex. It is designed to safely, economically, and efficiently provide air traffic services through the cost-effective provision of facilities and seamless services in collaboration with multiple agents however, contrary the vision, the system is loosely integrated and is suffering tremendously from antiquated equipment and saturated airways. The new Next Generation (Next Gen) ATM system is designed to transform the current system into an agile, robust and responsive set of operations that are designed to safely manage the growing needs of the projected increasingly complex, diverse set of air transportation system users and massive projected worldwide traffic rates. This new revolutionary technology-centric system is dynamically complex and is much more sophisticated than it's soon to be predecessor. ATM system failures could yield large scale catastrophic consequences as it is a safety critical system. This work will attempt to describe complexity and the complex nature of the NextGen ATM system and Trajectory Based Operational. Complex human factors interactions within Next Gen will be analyzed using a proposed dual experimental approach designed to identify hazards, gaps and elicit emergent hazards that would not be visible if conducted in isolation. Suggestions will be made along with a proposal for future human factors research in the TBO safety critical Next Gen environment.

  16. Lac repressor: Crystallization of intact tetramer and its complexes with inducer and operator DNA

    International Nuclear Information System (INIS)

    Pace, H.C.; Lu, P.; Lewis, M.

    1990-01-01

    The intact lac repressor tetramer, which regulates expression of the lac operon in Escherichia coli, has been crystallized in the native form, with an inducer, and in a ternary complex with operator DNA and an anti-inducer. The crystals without DNA diffract to better than 3.5 angstrom. They belong to the monoclinic space group C2 and have cell dimensions a = 164.7 angstrom, b = 75.6 angstrom, and c = 161.2 angstrom, with α = γ = 90 degree and β = 125.5 degree. Cocrystals have been obtained with a number of different lac operator-related DNA fragments. The complex with a blunt-ended 16-base-pair strand yielded tetragonal bipyramids that diffract to 6.5 angstrom. These protein-DNA cocrystals crack upon exposure to the gratuitous inducer isopropyl β-D-thiogalactoside, suggesting a conformational change in the repressor-operator complex

  17. Radiological survey of Ingalls Shipbuilding Division, Pascagoula, Mississippi, and environs

    International Nuclear Information System (INIS)

    Fowler, T.W.; Windham, S.T.; Callis, R.S.; Phillips, C.R.

    1983-09-01

    This report presents results of the survey conducted by EERF personnel to assess environmental radioactivity remaining from operations of nuclear-powered vessels at Ingalls Shipyard, Pascagoula, Mississippi. Since Ingalls Shipyard will no longer build or service nuclear powered ships and has completed the decommissioning of the nuclear support facilities, an additional purpose of the survey was to determine if there is any remaining radioactivity from previous operations which could contribute to significant population exposure

  18. Influence of step complexity and presentation style on step performance of computerized emergency operating procedures

    Energy Technology Data Exchange (ETDEWEB)

    Xu Song [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China); Li Zhizhong [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China)], E-mail: zzli@tsinghua.edu.cn; Song Fei; Luo Wei; Zhao Qianyi; Salvendy, Gavriel [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China)

    2009-02-15

    With the development of information technology, computerized emergency operating procedures (EOPs) are taking the place of paper-based ones. However, ergonomics issues of computerized EOPs have not been studied adequately since the industrial practice is quite limited yet. This study examined the influence of step complexity and presentation style of EOPs on step performance. A simulated computerized EOP system was developed in two presentation styles: Style A: one- and two-dimensional flowcharts combination; Style B: two-dimensional flowchart and success logic tree combination. Step complexity was quantified by a complexity measure model based on an entropy concept. Forty subjects participated in the experiment of EOP execution using the simulated system. The results of data analysis on the experiment data indicate that step complexity and presentation style could significantly influence step performance (both step error rate and operation time). Regression models were also developed. The regression analysis results imply that operation time of a step could be well predicted by step complexity while step error rate could only partly predicted by it. The result of a questionnaire investigation implies that step error rate was influenced not only by the operation task itself but also by other human factors. These findings may be useful for the design and assessment of computerized EOPs.

  19. Musculoskeletal disorders in shipyard industry: prevalence, health care use, and absenteeism

    Directory of Open Access Journals (Sweden)

    Konstantinou Eleni

    2006-11-01

    Full Text Available Abstract Background It is unclear whether the well-known risk factors for the occurrence of musculoskeletal disorders (MSD also play an important role in the determining consequences of MSD in terms of sickness absence and health care use. Methods A cross-sectional study was conducted among 853 shipyard employees. Data were collected by questionnaire on physical and psychosocial workload, need for recovery, perceived general health, occurrence of musculoskeletal complaints, and health care use during the past year. Retrospective data on absenteeism were also available from the company register. Results In total, 37%, 22%, and 15% of employees reported complaints of low back, shoulder/neck, and hand/wrist during the past 12 months, respectively. Among all employees with at least one MSD, 27% visited a physician at least once and 20% took at least one period of sick leave. Various individual and work-related factors were associated with the occurrence of MSD. Health care use and absenteeism were strongest influenced by chronicity of musculoskeletal complaints and comorbidity with other musculoskeletal complaints and, to a lesser extent, by work-related factors. Conclusion In programmes aimed at preventing the unfavourable consequences of MSD in terms of sickness absence and health care use it is important to identify the (individual factors that determine the development of chronicity of complaints. These factors may differ from the well-know risk factors for the occurrence of MSD that are targeted in primary prevention.

  20. COMPOEX Technology to Assist Leaders in Planning and Executing Campaigns in Complex Operational Environments

    National Research Council Canada - National Science Library

    Kott, Alexander; Corpac, Peter S

    2007-01-01

    ... in a complex operational environment. Leaders must understand the operational environment, develop campaign plans that include multiple lines of effort such as security, governance, political-economic development, rule of law and employ...

  1. Posture control and the risk of industrial accident: a stabilographic investigation in a naval shipyard.

    Science.gov (United States)

    Moll van Charante, A W; Snijders, C J; Mulder, P G

    1991-10-01

    In a previous case-control study on the effect of impaired perceptual acuity on the risk of industrial injuries at a naval shipyard, three factors which might influence the perception and processing of sensory impressions--alcohol consumption, hearing loss exceeding 20 decibels (dB) and exposure to noise exceeding 82 dB(A)--were found to contribute to the risk of injury. According to recent reports, these factors can all lead to impaired posture control. Because in general about 40% of all accidents are associated with falling, tripping, slipping and the like, a supplementary study has been carried out to unravel possible confounding effects of posture control on these three risk factors. Cases (who had suffered two or more accidents during the preceding 4 years) and controls (who had been accident-free in the same period) were compared as regards posture control measured during silence or noise. No significant difference in posture control was found between cases and controls, either in silence or during exposure to heavy noise.

  2. Impact of night-shift work on the prevalence of erosive esophagitis in shipyard male workers.

    Science.gov (United States)

    Chung, Tae Heum; Lee, Jiho; Kim, Moon Chan

    2016-08-01

    Whether night-shift work is a risk factor for gastroesophageal reflux disease is controversial. The aim of this study was to investigate the association between night-shift work and other factors, and erosive esophagitis. A cross-sectional study with 6040 male shipyard workers was performed. Esophagogastroduodenoscopic examination and a survey about night-shift work status, lifestyle, medical history, educational status, and marital status were conducted in all workers. The odds ratios of erosive esophagitis according to night-shift work status were calculated by using the logistic regression model. The prevalence of erosive esophagitis increased in the night-shift workers [odds ratio, 95 % confidence interval: 1.41 (1.03-1.94)]. According to multiple logistic regression models, night-shift work, obesity, smoking, and alcohol consumption of ≥140 g/week were significant risk factors for erosive esophagitis. By contrast, Helicobacter pylori infection was negatively associated with erosive esophagitis. Night-shift work is suggested to be a risk factor for erosive esophagitis. Avoidance of night-shift work and lifestyle modification should be considered for prevention and management of gastroesophageal reflux disease.

  3. Safety management of a complex R and D ground operating system

    Science.gov (United States)

    Connors, J. F.; Maurer, R. A.

    1975-01-01

    A perspective on safety program management was developed for a complex R&D operating system, such as the NASA-Lewis Research Center. Using a systems approach, hazardous operations are subjected to third-party reviews by designated-area safety committees and are maintained under safety permit controls. To insure personnel alertness, emergency containment forces and employees are trained in dry-run emergency simulation exercises. The keys to real safety effectiveness are top management support and visibility of residual risks.

  4. Effects of exposure to ethylene glycol ethers on shipyard painters: II. Male reproduction.

    Science.gov (United States)

    Welch, L S; Schrader, S M; Turner, T W; Cullen, M R

    1988-01-01

    To determine whether 2-ethoxyethanol (2-EE) and 2-methoxyethanol (2-ME) affected the reproductive potential of exposed men, we examined the semen of 73 painters and 40 controls who work in a large shipyard. An industrial hygiene survey was performed to characterize the work environment. The men supplied information on demographic characteristics, medical conditions, personal habits, and reproductive history; underwent a physical examination; and provided a semen sample. Semen samples were analyzed for pH, volume, turbidity, liquidity, viability by stain exclusion and hypo-osmotic stress, sperm density and count per ejaculate, motility using a videotape technique, morphology, and morphometry. Serum was analyzed for testosterone, FSH, and LH. The industrial hygiene survey revealed that the painters were exposed to 2-EE at a time-weighted average (TWA) of 0-80.5 mg/m3 with a mean of 9.9 mg/m3, and to 2-ME at a TWA of 0-17.7 mg/m3 with a mean of 2.6 mg/m3. Painters had an increased prevalence of oligospermia and azoospermia and an increased odds ratio for a lower sperm count per ejaculate, while smoking was controlled. This finding is consistent with prior animal studies and with one human study. Potential biases and confounding of the data are discussed.

  5. A toolkit for computerized operating procedure of complex industrial systems with IVI-COM technology

    International Nuclear Information System (INIS)

    Zhou Yangping; Dong Yujie; Huang Xiaojing; Ye Jingliang; Yoshikawa, Hidekazu

    2013-01-01

    A human interface toolkit is proposed to help the user develop computerized operating procedure of complex industrial system such as Nuclear Power Plants (NPPs). Coupled with a friendly graphical interface, this integrated tool includes a database, a procedure editor and a procedure executor. A three layer hierarchy is adopted to express the complexity of operating procedure, which includes mission, process and node. There are 10 kinds of node: entrance, exit, hint, manual input, detector, actuator, data treatment, branch, judgment and plug-in. The computerized operating procedure will sense and actuate the actual industrial systems with the interface based on IVI-COM (Interchangeable Virtual Instrumentation-Component Object Model) technology. A prototype system of this human interface toolkit has been applied to develop a simple computerized operating procedure for a simulated NPP. (author)

  6. Simplified reactive power management strategy for complex power grids under stochastic operation and incomplete information

    DEFF Research Database (Denmark)

    Vlachogiannis, Ioannis (John)

    2009-01-01

    grids is a major issue for system operators. Under these circumstances an online reactive power management strategy with minimum risk concerning all uncertain and stochastic parameters is proposed. Therefore, new concepts such as reactive power-weighted node-to-node linking and reactive power control......In the current released energy market, the large-scale complex transmission networks and the distribution ones with dispersed energy sources and "intelligent" components operate under uncertainties, stochastic and prior incomplete information. A safe and reliable operation of such complex power...... capability are introduced. A distributed and interconnected stochastic learning automata system is implemented to manage, in a unified and unique way, the reactive power in complex power grids with stochastic reactive power demand and detect the vulnerable part. The proposed simplified strategy can also...

  7. Operational Complexity of Supplier-Customer Systems Measured by Entropy—Case Studies

    Directory of Open Access Journals (Sweden)

    Ladislav Lukáš

    2016-04-01

    Full Text Available This paper discusses a unified entropy-based approach for the quantitative measurement of operational complexity of company supplier-customer relations. Classical Shannon entropy is utilized. Beside this quantification tool, we also explore the relations between Shannon entropy and (c,d-entropy in more details. An analytic description of so called iso-quant curves is given, too. We present five case studies, albeit in an anonymous setting, describing various details of general procedures for measuring the operational complexity of supplier-customer systems. In general, we assume a problem-oriented database exists, which contains detailed records of all product forecasts, orders and deliveries both in quantity and time, scheduled and realized, too. Data processing detects important flow variations both in volumes and times, e.g., order—forecast, delivery—order, and actual production—scheduled one. The unifying quantity used for entropy computation is the time gap between actual delivery time and order issue time, which is nothing else but a lead time in inventory control models. After data consistency checks, histograms and empirical distribution functions are constructed. Finally, the entropy, information-theoretic measure of supplier-customer operational complexity, is calculated. Basic steps of the algorithm are mentioned briefly, too. Results of supplier-customer system analysis from selected Czech small and medium-sized enterprises (SMEs are presented in various computational and managerial decision making details. An enterprise is ranked as SME one, if it has at most 250 employees and its turnover does not exceed 50 million USD per year, or its balance sheet total does not exceed 43 million USD per year, alternatively.

  8. MATHEMATICAL MODELS OF PROCESSES AND SYSTEMS OF TECHNICAL OPERATION FOR ONBOARD COMPLEXES AND FUNCTIONAL SYSTEMS OF AVIONICS

    Directory of Open Access Journals (Sweden)

    Sergey Viktorovich Kuznetsov

    2017-01-01

    Full Text Available Modern aircraft are equipped with complicated systems and complexes of avionics. Aircraft and its avionics tech- nical operation process is observed as a process with changing of operation states. Mathematical models of avionics pro- cesses and systems of technical operation are represented as Markov chains, Markov and semi-Markov processes. The pur- pose is to develop the graph-models of avionics technical operation processes, describing their work in flight, as well as during maintenance on the ground in the various systems of technical operation. The graph-models of processes and sys- tems of on-board complexes and functional avionics systems in flight are proposed. They are based on the state tables. The models are specified for the various technical operation systems: the system with control of the reliability level, the system with parameters control and the system with resource control. The events, which cause the avionics complexes and func- tional systems change their technical state, are failures and faults of built-in test equipment. Avionics system of technical operation with reliability level control is applicable for objects with constant or slowly varying in time failure rate. Avion- ics system of technical operation with resource control is mainly used for objects with increasing over time failure rate. Avionics system of technical operation with parameters control is used for objects with increasing over time failure rate and with generalized parameters, which can provide forecasting and assign the borders of before-fail technical states. The pro- posed formal graphical approach avionics complexes and systems models designing is the basis for models and complex systems and facilities construction, both for a single aircraft and for an airline aircraft fleet, or even for the entire aircraft fleet of some specific type. The ultimate graph-models for avionics in various systems of technical operation permit the beginning of

  9. "They Are Hiring the White Women but They Won't Hire the Colored Women": Black Women Confront Racism and Sexism in the Richmond Shipyards During World War II

    OpenAIRE

    Tuft, Paige

    2015-01-01

    During World War II, black women migrated largely out of the South to take advantage of the growing defense industries in California. Black women flocked to the shipbuilding industry in Richmond for the great economic opportunities industrial jobs offered. What they found when they arrived and attempted to secure jobs in the shipyards hardly lived up to their dreams and expectations. Black women found themselves faced with dual discrimination due to their race and gender. The shortage of a...

  10. Operating of mobile machine units system using the model of multicomponent complex movement

    OpenAIRE

    A. Lebedev; R. Kaidalov; N. Artiomov; M. Shulyak; M. Podrigalo; D. Abramov; D. Klets

    2015-01-01

    To solve the problems of mobile machine units system operating it is proposed using complex multi-component (composite) movement physical models. Implementation of the proposed method is possible by creating of automatic operating systems of fuel supply to the engines using linear accelerometers. Some examples to illustrate the proposed method are offered.

  11. An ergonomics study of computerized emergency operating procedures: Presentation style, task complexity, and training level

    International Nuclear Information System (INIS)

    Xu Song; Song Fei; Li Zhizhong; Zhao Qianyi; Luo Wei; He Xuhong; Salvendy, Gavriel

    2008-01-01

    Emergency operating procedures (EOPs) are widely used in nuclear power plants (NPPs). With the development of information technology, computerized EOPs are taking the place of paper-based ones. Unlike paper-based EOPs, the industrial practice of computerized EOPs is still quite limited. Ergonomics issues of computerized EOPs have not been studied adequately. This study focuses on the effects of EOP presentation style, task complexity, and training level on the performance of the operators in the execution of computerized EOPs. One simulated computerized EOP system was developed to present two EOPs, each with different task complexity levels, by two presentation styles (Style A: one- and two-dimensional flowcharts combination; Style B: two-dimensional flowchart and success logic tree combination). Forty subjects participated in the experiment of EOP execution using the simulated system. Statistical analysis of the experimental results indicates that: (1) complexity, presentation style, and training level all can significantly influence the error rate. High-complexity tasks and lack of sufficient training may lead to a higher error rate. Style B caused a significantly higher error rate than style A did in the skilled phase. So the designers of computerized procedures should take the presentation styles of EOPs into account. (2) Task complexity and training level can significantly influence operation time. No significant difference was found in operation time between the two presentation styles. (3) Training level can also significantly influence the subjective workload of EOPs operations. This implies that adequate training is very important for the performance of computerized EOPs even if emergency responses with computerized EOPs are much more simple and easy than that with paper-based EOPs

  12. An ergonomics study of computerized emergency operating procedures: Presentation style, task complexity, and training level

    Energy Technology Data Exchange (ETDEWEB)

    Xu Song; Song Fei [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China); Li Zhizhong [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China)], E-mail: zzli@tsinghua.edu.cn; Zhao Qianyi; Luo Wei [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China); He Xuhong [Scanpower Risk Management China Inc., Towercrest International Plaza, No. 3 Maizidian West Road, Chaoyang District, Beijing 100016 (China); Salvendy, Gavriel [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China)

    2008-10-15

    Emergency operating procedures (EOPs) are widely used in nuclear power plants (NPPs). With the development of information technology, computerized EOPs are taking the place of paper-based ones. Unlike paper-based EOPs, the industrial practice of computerized EOPs is still quite limited. Ergonomics issues of computerized EOPs have not been studied adequately. This study focuses on the effects of EOP presentation style, task complexity, and training level on the performance of the operators in the execution of computerized EOPs. One simulated computerized EOP system was developed to present two EOPs, each with different task complexity levels, by two presentation styles (Style A: one- and two-dimensional flowcharts combination; Style B: two-dimensional flowchart and success logic tree combination). Forty subjects participated in the experiment of EOP execution using the simulated system. Statistical analysis of the experimental results indicates that: (1) complexity, presentation style, and training level all can significantly influence the error rate. High-complexity tasks and lack of sufficient training may lead to a higher error rate. Style B caused a significantly higher error rate than style A did in the skilled phase. So the designers of computerized procedures should take the presentation styles of EOPs into account. (2) Task complexity and training level can significantly influence operation time. No significant difference was found in operation time between the two presentation styles. (3) Training level can also significantly influence the subjective workload of EOPs operations. This implies that adequate training is very important for the performance of computerized EOPs even if emergency responses with computerized EOPs are much more simple and easy than that with paper-based EOPs.

  13. System Coordination of Survivability and Safety of Complex Engineering Objects Operation

    Directory of Open Access Journals (Sweden)

    Nataliya Pankratova

    2014-11-01

    Full Text Available A system strategy to estimation the guaranteed survivability and safety of complex engineering objects (CEO operation is proposed. The principles that underlie the strategy of the guaranteed safety of CEO operation provide a flexible approach to timely detection, recognition, forecast, and system diagnostics of risk factors and situations, to formulation and implementation of a rational decision in a practicable time within an unremovable time constraint. Implementation of the proposed strategy is shown on example of diagnostics of electromobile-refrigerator functioning in real mode.

  14. On the number of eigenvalues of the discrete one-dimensional Dirac operator with a complex potential

    Science.gov (United States)

    Hulko, Artem

    2018-03-01

    In this paper we define a one-dimensional discrete Dirac operator on Z . We study the eigenvalues of the Dirac operator with a complex potential. We obtain bounds on the total number of eigenvalues in the case where V decays exponentially at infinity. We also estimate the number of eigenvalues for the discrete Schrödinger operator with complex potential on Z . That is we extend the result obtained by Hulko (Bull Math Sci, to appear) to the whole Z.

  15. Validating cognitive support for operators of complex human-machine systems

    International Nuclear Information System (INIS)

    O'Hara, J.; Wachtel, J.

    1995-01-01

    Modem nuclear power plants (NPPs) are complex systems whose performance is the result of an intricate interaction of human and system control. A complex system may be defined as one which supports a dynamic process involving a large number of elements that interact in many different ways. Safety is addressed through defense-in-depth design and preplanning; i.e., designers consider the types of failures that are most likely to occur and those of high consequence, and design their solutions in advance. However, complex interactions and their failure modes cannot always be anticipated by the designer and may be unfamiliar to plant personnel. These situations may pose cognitive demands on plant personnel, both individually and as a crew. Other factors may contribute to the cognitive challenges of NPP operation as well, including hierarchal processes, dynamic pace, system redundancy and reliability, and conflicting objectives. These factors are discussed in this paper

  16. OPERATING OF MOBILE MACHINE UNITS SYSTEM USING THE MODEL OF MULTICOMPONENT COMPLEX MOVEMENT

    Directory of Open Access Journals (Sweden)

    A. Lebedev

    2015-07-01

    Full Text Available To solve the problems of mobile machine units system operating it is proposed using complex multi-component (composite movement physical models. Implementation of the proposed method is possible by creating of automatic operating systems of fuel supply to the engines using linear accelerometers. Some examples to illustrate the proposed method are offered.

  17. The step complexity measure for emergency operating procedures - comparing with simulation data

    International Nuclear Information System (INIS)

    Park, Jinkyun; Jung, Wondea; Kim, Jaewhan; Ha, Jaejoo; Shin, Yunghwa

    2001-01-01

    In complex systems, such as nuclear power plants (NPPs) or airplane control systems, human errors play a major role in many accidents. Therefore, to prevent occurrences of accidents or to ensure system safety, extensive effort has been made to identify significant factors that cause human errors. According to related studies, written manuals or operating procedures are revealed as one of the most important factors, and complexity or understandability of a procedure is pointed out as one of the major reasons that make procedure-related human errors. Many qualitative checklists are suggested to evaluate emergency operating procedures (EOPs) of NPPs. However, since qualitative evaluations using checklists have some drawbacks, a quantitative measure that can quantify the complexity of EOPs is imperative to compensate for them. In order to quantify the complexity of EOPs, Park et al. suggested the step complexity (SC) measure to quantify the complexity of a step included in EOPs. In this paper, to ensure the appropriateness of the SC measure, SC scores are compared with averaged step performance time data obtained from emergency training records. The total number of available records is 36, and training scenarios are the loss of coolant accident and the excess steam dump event. The number of scenario is 18 each. From these emergency training records, step performance time data for 39 steps are retrieved, and they are compared with estimated SC scores of them. In addition, several questions that are needed to clarify the appropriateness of the SC measure are also discussed. As a result, it was observed that estimated SC scores and step performance time data have a statistically meaningful correlation. Thus, it can be concluded that the SC measure can quantify the complexity of steps included in EOPs

  18. Development of the step complexity measure for emergency operating procedures using entropy concepts

    International Nuclear Information System (INIS)

    Park, Jinkyun; Jung, Wondea; Ha, Jaejoo

    2001-01-01

    For a nuclear power plant (NPP), symptom-based emergency operating procedures (EOPs) have been adopted to enhance the safety of NPPs through reduction of operators' workload under emergency conditions. Symptom-based EOPs, however, could place a workload on operators because they have to not only identify related symptoms, but also understand the context of steps that should be carried out. Therefore, many qualitative checklists are suggested to ensure the appropriateness of steps included in EOPs. However, since these qualitative evaluations have some drawbacks, a quantitative measure that can roughly estimate the complexity of EOP steps is imperative to compensate for them. In this paper, a method to evaluate the complexity of an EOP step is developed based on entropy measures that have been used in software engineering. Based on these, step complexity (SC) measure that can evaluate SC from various viewpoints (such as the amount of information/operators' actions included in each EOP step, and the logic structure of each EOP step) was developed. To verify the suitableness of the SC measure, estimated SC values are compared with subjective task load scores obtained from the NASA-TLX (task load index) method and step performance time obtained from a full scope simulator. From these comparisons, it was observed that estimated SC values generally agree with the NASA-TLX scores and step performance time data. Thus, it could be concluded that the developed SC measure would be considered for evaluating SC of an EOP step

  19. Benefits of sequential turbocharging in improving high torque/low speed operation of medium speed diesel engines

    Energy Technology Data Exchange (ETDEWEB)

    Danyluk, P.; Gutoski, G. [Coltec Industries Inc., Fairbanks Morse Engine Division (United States); Chen, S.K. [PEI Consultants (United States)

    1998-12-31

    This paper describes the benefits of sequential turbocharging in improving the operating envelope of a medium speed diesel engine. In particular, the high torque, low speed performance envelope can be greatly extended over that of a standard medium speed engine and, in addition, can offer improved operating range over what has been achieved with compressor air bypass/waste gate systems. This paper compares the three approaches on the basis of possible operating envelopes for a specific application, the new U.S. Navy LPD-17 amphibious assault ship, which has a very demanding requirement for high torque at low engine speed and low ambient temperatures. Comparison is made to the earlier approach to extend the operating envelope on the U.S. Navy LSD-41 class engines. The LSD-41 fleet has been in service since 1985 running with a compressor air bypass system developed jointly by Lockheed Shipyard and Coltec Industries for the U.S. Navy. (au)

  20. The National Shipbuilding Research Program. Evaluation of Shipbuilding CAD/CAM Systems (Phase I)

    Science.gov (United States)

    1996-10-14

    Industries Norddeutsche Itiormations Systems GmbH Odense Steel Shipyard Sener Ingenieria y Sistemas SMK Ingenieurburo Verolrne Scheepswerf Heusden b.v...Systems Logimatic Marine Consultants A/S Mitsubishi Heavy Industries Norddeutsche Informations Systems GmbH Odense Steel Shipyard Sener Ingenieria y...market share and business backlog . continue profitable operation in spite of relentless price and schedule competition 11.0 SENERMAR Sener Ingenieria

  1. Behavioral, attitudinal, and physiologic characteristics of smoking and nonsmoking asbestos-exposed shipyard workers

    International Nuclear Information System (INIS)

    Li, V.C.; Kim, Y.J.; Terry, P.B.; Cuthie, J.C.; Roter, D.; Emmett, E.A.; Harvey, A.; Permutt, S.

    1983-01-01

    The smoking characteristics of shipyard workers participating in an Asbestos Medical Surveillance Program (N=3991) were assessed. Sources of data were: 1) a self-assessment questionnaire on the smoking history and respiratory symptomatology of the 871 current smokers who participated in the smoking study, and 2) chest roentgenograms and pulmonary function test results and medical records for the entire population. The study population included 1711 current smokers, 988 former smokers and 1292 never smokers. The annual ''quit rate'' for former smokers had increased from less than 1% in 1961 to 4.2% in 1978. Of the 871 current smokers who participated in the smoking study, 19% had resumed smoking after having given up cigarettes for one year or longer. Men in the smoking study were reasonably well informed about the health consequences of smoking. While they perceived themselves to be susceptible to disease, and the disease to be serious, the benefits they saw in quitting were related more to economics and aesthetics than to health. When the results were age adjusted, no differences in rate of pulonary function abnormalities and chest film abnormalities were found betwen current smokers who voluntarily participated in the smoking study and those who did not. All pulmonary function testing abnormality and chest film abnormality rates were significantly lower for former smokers and never smokers

  2. Behavioral, attitudinal, and psysiologic characteristics of smoking and nonsmoking asbestos-exposed shipyard workers

    International Nuclear Information System (INIS)

    Li, V.C.; Kim, Y.J.; Terry, P.B.; Cuthie, J.C.; Roter, D.; Emmett, E.A.; Harvey, A.; Permutt, S.

    1983-01-01

    The smoking characteristics of shipyard workers participating in an Asbestos Medical Surveillance Program (N=3991) were assessed. Sources of data were: 1) a self-assessment questionnaire on the smoking history and respiratory symptomatology of the 871 current smokers who participated in the smoking study, and 2) chest roentgenograms and pulmonary function test results and medical records for the entire population. The study population included 1711 current smokers, 988 former smokers and 1292 never smokers. The annual ''quit rate'' for former smokers had increased from less than 1% in 1961 to 4.2% in 1978. Of the 871 current smokers who participated in the smoking study, 19% had resumed smoking after having given up cigarettes for one year or longer. Men in the smoking study were reasonably well informed about the health consequences of smoking. While they perceived themselves to be susceptible to disease, and the disease to be serious, the benefits they saw in quitting were related more to economics and aesthetics than to health. When the results were age adjusted, no differences in rate of pulonary function abnormalities and chest film abnormalities were found betwen current smokers who voluntarily participated in the smoking study and those who did not. All pulmonary function testing abnormality and chest film abnormality rates were significantly lower for former smokers and never smokers

  3. Compact composition operators on real Banach spaces of complex-valued bounded Lipschitz functions

    Directory of Open Access Journals (Sweden)

    Davood Alimohammadi

    2014-10-01

    Full Text Available We characterize compact composition operators on real Banachspaces of complex-valued bounded Lipschitz functions on metricspaces, not necessarily compact, with Lipschitz involutions anddetermine their spectra.

  4. Simplified reactive power management strategy for complex power grids under stochastic operation and incomplete information

    International Nuclear Information System (INIS)

    Vlachogiannis, John G.

    2009-01-01

    In the current released energy market, the large-scale complex transmission networks and the distribution ones with dispersed energy sources and 'intelligent' components operate under uncertainties, stochastic and prior incomplete information. A safe and reliable operation of such complex power grids is a major issue for system operators. Under these circumstances an online reactive power management strategy with minimum risk concerning all uncertain and stochastic parameters is proposed. Therefore, new concepts such as reactive power-weighted node-to-node linking and reactive power control capability are introduced. A distributed and interconnected stochastic learning automata system is implemented to manage, in a unified and unique way, the reactive power in complex power grids with stochastic reactive power demand and detect the vulnerable part. The proposed simplified strategy can also consider more stochastic aspects such as variable grid's topology. Results of the proposed strategy obtained on the networks of IEEE 30-bus and IEEE 118-bus systems demonstrate the effectiveness of the proposed strategy.

  5. The step complexity measure for emergency operating procedures: measure verification

    International Nuclear Information System (INIS)

    Park, Jinkyun; Jung, Wondea; Ha, Jaejoo; Park, Changkue

    2002-01-01

    In complex systems, such as nuclear power plants (NPPs) or airplane control systems, human errors play a major role in many accidents. Therefore, to prevent an occurrence of accidents or to ensure system safety, extensive effort has been made to identify significant factors that can cause human errors. According to related studies, written manuals or operating procedures are revealed as one of the most important factors, and the understandability is pointed out as one of the major reasons for procedure-related human errors. Many qualitative checklists are suggested to evaluate emergency operating procedures (EOPs) of NPPs. However, since qualitative evaluations using checklists have some drawbacks, a quantitative measure that can quantify the complexity of EOPs is very necessary to compensate for them. In order to quantify the complexity of steps included in EOPs, Park et al. suggested the step complexity (SC) measure. In addition, to ascertain the appropriateness of the SC measure, averaged step performance time data obtained from emergency training records for the loss of coolant accident and the excess steam dump event were compared with estimated SC scores. Although averaged step performance time data show good correlation with estimated SC scores, conclusions for some important issues that have to be clarified to ensure the appropriateness of the SC measure were not properly drawn because of lack of backup data. In this paper, to clarify remaining issues, additional activities to verify the appropriateness of the SC measure are performed using averaged step performance time data obtained from emergency training records. The total number of available records is 36, and training scenarios are the steam generator tube rupture and the loss of all feedwater. The number of scenarios is 18 each. From these emergency training records, averaged step performance time data for 30 steps are retrieved. As the results, the SC measure shows statistically meaningful

  6. Step Complexity Measure for Emergency Operating Procedures - Determining Weighting Factors

    International Nuclear Information System (INIS)

    Park, Jinkyun; Jung, Wondea; Kim, Jaewhan; Ha, Jaejoo

    2003-01-01

    In complex systems, such as nuclear power plants (NPPs) or airplane control systems, human error has been regarded as the primary cause of many events. Therefore, to ensure system safety, extensive effort has been made to identify the significant factors that can cause human error. According to related studies, written manuals or operating procedures are revealed as one of the important factors, and the understandability is pointed out as one of the major reasons for procedure-related human errors.Many qualitative checklists have been suggested to evaluate emergency operating procedures (EOPs) of NPPs so as to minimize procedure-related human errors. However, since qualitative evaluations using checklists have some drawbacks, a quantitative measure that can quantify the complexity of EOPs is indispensable.From this necessity, Park et al. suggested the step complexity (SC) measure to quantify the complexity of procedural steps included in EOPs. To verify the appropriateness of the SC measure, averaged step performance time data obtained from emergency training records of the loss-of-coolant accident (LOCA) and the excess steam demand event were compared with estimated SC scores. However, although averaged step performance time data and estimated SC scores show meaningful correlation, some important issues such as determining proper weighting factors have to be clarified to ensure the appropriateness of the SC measure. These were not properly dealt with due to a lack of backup data.In this paper, to resolve one of the important issues, emergency training records are additionally collected and analyzed in order to determine proper weighting factors. The total number of collected records is 66, and the training scenarios cover five emergency conditions including the LOCA, the steam generator tube rupture, the loss of all feedwater, the loss of off-site power, and the station blackout. From these records, average step performance time data are retrieved, and new

  7. RISK EVALUATION OF PIN JIG WORK UNIT IN SHIPBUILDING BY USING FUZZY AHP METHOD

    Directory of Open Access Journals (Sweden)

    Murat Ozkok

    2015-03-01

    Full Text Available Shipbuilding industry includes many different industry branches in itself so various kind of work accidents occur. These work accidents often cause serious injuries and also deaths. It is a crucial thing to prevent or minimize these accidents. In order to reduce work accidents in shipyards, the most hazardous activities are needed to be determined and then, shipyard management must work on it in order to remove these hazard sources. In this study, pin jig work unit, where the curved parts are mounted on adjustable pin jigs, was considered. At first, the work activities and operations of pin jig work station were identified and they were classified as main and sub risk criterions. Then, pair comparison scales were built and these risk criterions were evaluated by experts who have been working for a shipyard located in Turkey. As a result of the evaluations of the experts, the risk weights of the activities carried out at pin jig work unit were defined by using fuzzy AHP method. Therefore, it is aimed for the shipyard management to take some precautions at pinjig work unit on the risky operations before failures happen.

  8. The effects of overtime work and task complexity on the performance of nuclear plant operators: A proposed methodology

    International Nuclear Information System (INIS)

    Banks, W.W.; Potash, L.

    1985-01-01

    This document presents a very general methodology for determining the effect of overtime work and task complexity on operator performance in response to simulated out-of-limit nuclear plant conditions. The independent variables consist of three levels of overtime work and three levels of task complexity. Multiple dependent performance measures are proposed for use and discussion. Overtime work is operationally defined in terms of the number of hours worked by nuclear plant operators beyond the traditional 8 hours per shift. Task complexity is operationalized in terms of the number of operator tasks required to remedy a given plant anomalous condition and bring the plant back to a ''within limits'' or ''normal'' steady-state condition. The proposed methodology would employ a 2 factor repeated measures design along with the analysis of variance (linear) model

  9. Advances in complex analysis and operator theory festschrift in honor of Daniel Alpay’s 60th birthday

    CERN Document Server

    Sabadini, Irene; Struppa, Daniele; Vajiac, Mihaela

    2017-01-01

    This book gathers contributions written by Daniel Alpay’s friends and collaborators. Several of the papers were presented at the International Conference on Complex Analysis and Operator Theory held in honor of Professor Alpay’s 60th birthday at Chapman University in November 2016. The main topics covered are complex analysis, operator theory and other areas of mathematics close to Alpay’s primary research interests. The book is recommended for mathematicians from the graduate level on, working in various areas of mathematical analysis, operator theory, infinite dimensional analysis, linear systems, and stochastic processes.

  10. An Evolutionary Complex Systems Decision-Support Tool for the Management of Operations

    International Nuclear Information System (INIS)

    Baldwin, J S; Allen, P M; Ridgway, K

    2011-01-01

    This research aimed to add both to the development of complex systems thinking in the subject area of Operations and Production Management and to the limited number of applications of computational models and simulations from the science of complex systems. The latter potentially offer helpful decision-support tools for operations and production managers. A mechanical engineering firm was used as a case study where a combined qualitative and quantitative methodological approach was employed to extract the required data from four senior managers. Company performance measures as well as firm technologies, practices and policies, and their relation and interaction with one another, were elicited. The data were subjected to an evolutionary complex systems model resulting in a series of simulations. The findings included both reassuring and some unexpected results. The simulation based on the CEO's opinions led the most cohesive and synergistic collection of practices describing the firm, closely followed by the Marketing and R and D Managers. The Manufacturing Manager's responses led to the most extreme evolutionary trajectory where the integrity of the entire firm came into question particularly when considering how employees were utilised. By drawing directly from the opinions and views of managers rather than from logical 'if-then' rules and averaged mathematical representations of agents that characterise agent-based and other self-organisational models, this work builds on previous applications by capturing a micro-level description of diversity and a learning effect that has been problematical not only in terms of theory but also in application. This approach can be used as a decision-support tool for operations and other managers providing a forum with which to explore a) the strengths, weaknesses and consequences of different decision-making capacities within the firm; b) the introduction of new manufacturing technologies, practices and policies; and, c) the

  11. An Evolutionary Complex Systems Decision-Support Tool for the Management of Operations

    Science.gov (United States)

    Baldwin, J. S.; Allen, P. M.; Ridgway, K.

    2011-12-01

    This research aimed to add both to the development of complex systems thinking in the subject area of Operations and Production Management and to the limited number of applications of computational models and simulations from the science of complex systems. The latter potentially offer helpful decision-support tools for operations and production managers. A mechanical engineering firm was used as a case study where a combined qualitative and quantitative methodological approach was employed to extract the required data from four senior managers. Company performance measures as well as firm technologies, practices and policies, and their relation and interaction with one another, were elicited. The data were subjected to an evolutionary complex systems model resulting in a series of simulations. The findings included both reassuring and some unexpected results. The simulation based on the CEO's opinions led the most cohesive and synergistic collection of practices describing the firm, closely followed by the Marketing and R&D Managers. The Manufacturing Manager's responses led to the most extreme evolutionary trajectory where the integrity of the entire firm came into question particularly when considering how employees were utilised. By drawing directly from the opinions and views of managers rather than from logical 'if-then' rules and averaged mathematical representations of agents that characterise agent-based and other self-organisational models, this work builds on previous applications by capturing a micro-level description of diversity and a learning effect that has been problematical not only in terms of theory but also in application. This approach can be used as a decision-support tool for operations and other managers providing a forum with which to explore a) the strengths, weaknesses and consequences of different decision-making capacities within the firm; b) the introduction of new manufacturing technologies, practices and policies; and, c) the

  12. Applications of systems thinking and soft operations research in managing complexity from problem framing to problem solving

    CERN Document Server

    2016-01-01

    This book captures current trends and developments in the field of systems thinking and soft operations research which can be applied to solve today's problems of dynamic complexity and interdependency. Such ‘wicked problems’ and messes are seemingly intractable problems characterized as value-laden, ambiguous, and unstable, that resist being tamed by classical problem solving. Actions and interventions associated with this complex problem space can have highly unpredictable and unintended consequences. Examples of such complex problems include health care reform, global climate change, transnational serious and organized crime, terrorism, homeland security, human security, disaster management, and humanitarian aid. Moving towards the development of solutions to these complex problem spaces depends on the lens we use to examine them and how we frame the problem. It will be shown that systems thinking and soft operations research has had great success in contributing to the management of complexity. .

  13. Distributed Low-Complexity Controller for Wind Power Plant in Derated Operation

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Madjidian, Daria; Spudic, Vedrana

    2013-01-01

    We consider a wind power plant of megawatt wind turbines operating in derated mode. When operating in this mode, the wind power plant controller is free to distribute power set-points to the individual turbines, as long as the total power demand is met. In this work, we design a controller...... that exploits this freedom to reduce the fatigue on the turbines in the wind power plant. We show that the controller can be designed in a decentralized manner, such that each wind turbine is equipped with a local low-complexity controller relying only on few measurements and little communication. As a basis...... for the controller design, a linear wind turbine model is constructed and verified in an operational wind power plant of megawatt turbines. Due to limitations of the wind power plant available for tests, it is not possible to implement the developed controller; instead the final distributed controller is evaluated...

  14. Response to 'Modularization as an avenue to economic competitiveness'

    International Nuclear Information System (INIS)

    Keene, W.P.

    1990-01-01

    of pipe 2800 miles of electrical cable 125 tons of ventilation duct are annual throughputs of our four largest shipyards. These quantities represent approximately 70% of capacity of the four major shipyards. This capacity is available in private shipyards because of continuing capital investments. More than four billion dollars of such investment resides in today's major shipyard facilities. The AP-600 power plant and possibly other passively safe type designs have reduced bulk quantities significantly. If we assume that as much as 75% of this design can be constructed as shipyard modules, then clearly two or three units per year fall within any one shipyard's annual capacity. Even with new ship construction levels equal to those of the past several years, modularized units for land based nuclear power plants of the AP-600 size could be produced at an annual rate of perhaps ten per year. skills already in place. Nearly all shipbuilding contracts are large scale, multiple unit, multiyear endeavors requiring technical design, world wide materiel purchasing, detail planning and scheduling, quality and cost control skills and techniques. Moreover, as previously mentioned, the shipbuilding community taken in a generic sense has been exposed to nuclear construction and the inherent quality control record keeping required by the U.S. Navy, the NRC and other regulatory agencies. Safety of handling equipment, community acceptance of constructing nuclear products and shipyard worker attitude would not bring any cultural shock into the industry. Of course, as with most issues, we must focus on costs. As Mr. Cottrell's work on the AP-600 project has revealed, costs would be reduced in choosing a shipyard for selected modules. Modular production has reduced ship costs by millions of manhours and modern, complex naval ships are in many respects more complex than power generating plants. Standard designs should not only enhance modularization but speed up the licensing process

  15. Operation safety of complex industrial systems

    International Nuclear Information System (INIS)

    Zwingelstein, G.

    1999-01-01

    Zero fault or zero risk is an unreachable goal in industrial activities like nuclear activities. However, methods and techniques exist to reduce the risks to the lowest possible and acceptable level. The operation safety consists in the recognition, evaluation, prediction, measurement and mastery of technological and human faults. This paper analyses each of these points successively: 1 - evolution of operation safety; 2 - definitions and basic concepts: failure, missions and functions of a system and of its components, basic concepts and operation safety; 3 - forecasting analysis of operation safety: reliability data, data-banks, precautions for the use of experience feedback data; realization of an operation safety study: management of operation safety, quality assurance, critical review and audit of operation safety studies; 6 - conclusions. (J.S.)

  16. STUDI PERENCANAAN SISTEM UNTUK PENDUKUNG KEPUTUSAN PROYEK KAPAL BANGUNAN BARU

    Directory of Open Access Journals (Sweden)

    Suyadi Suyadi

    2012-02-01

    Full Text Available Since Presidential decree No 5 2005 on the empowerment of the Indonesian shipping industry applies, theIndonesian shipbuilding industry has officially gained support from the Indonesian government to be able tocompete in the national as well as international market. Along with the globalization era and a lot ofshipbuilding orders, the shipyard management has to do some improvement to the shipyard to be morecompetitive. One of efforts that should be done is by improving the management of incoming orders. This isvery important to do because during this time the shipyard management has to collect a lot of informationfrom departments in the shipyard manually to consider accepted shipbuilding orders.In this paper, a new model to manage new shipbuilding orders is developed. The model is implementedwithin a computer-based decision support system that is related to an existing system of production, planningand control in the shipyard. The approach used in the development of this system is ROMC (Representation,Operation, Memory Aids and Control Mechanism.The aim of the developed decision support system is to assist all decision makers in defining problems,developing alternative solution; , and chosing various alternative decisions in the system development thereare three steps to be done : (i building data base, (ii building model base, and (iii building dialogue base

  17. Collaborative crew performance in complex operational systems: L'Efficacité du travail en équipage dans des systèmes opérationnel complexes

    National Research Council Canada - National Science Library

    1999-01-01

    .... As we progress towards the next millennium, complex operations will increasingly require consideration and integration of the collaborative element wherein crew performance becomes a critical factor for success...

  18. Phase V storage (Project W-112) Central Waste Complex operational readiness review, final report

    International Nuclear Information System (INIS)

    Wight, R.H.

    1997-01-01

    This document is the final report for the RFSH conducted, Contractor Operational Readiness Review (ORR) for the Central Waste Complex (CWC) Project W-112 and Interim Safety Basis implementation. As appendices, all findings, observations, lines of inquiry and the implementation plan are included

  19. Phase 5 storage (Project W-112) Central Waste Complex operational readiness review, final report

    Energy Technology Data Exchange (ETDEWEB)

    Wight, R.H.

    1997-05-30

    This document is the final report for the RFSH conducted, Contractor Operational Readiness Review (ORR) for the Central Waste Complex (CWC) Project W-112 and Interim Safety Basis implementation. As appendices, all findings, observations, lines of inquiry and the implementation plan are included.

  20. Awarable complexity: a study on CRT picture design based on plant images by NPP operators

    International Nuclear Information System (INIS)

    Kawano, Ryutaro; Ohtsuka, Tsutomu; Masugi, Tsuyoshi

    2000-01-01

    Original pictures installed in the 1st and 2nd generation type central control panels (CCP) and new 'Awarable and Complex' pictures were made on personal computers and evaluated. A total 18 of actual plant operators (M=32.3, SD=10.5 years old) participated in the evaluation. The operators rated the new CRT pictures highly. The response times using the new CRT pictures were shorter than those by the original pictures. Both results suggested that the CRT picture design guidelines based on the operators' plant images were effective for improving their performance. (author)

  1. Relation between task complexity and variability of procedure progression during an emergency operation

    International Nuclear Information System (INIS)

    Kim, Yochan; Park, Jinkyun; Jung, Wondea

    2013-01-01

    Highlights: • The relation between task complexity and the variability of procedure progression was investigated. • The two quantitative measures, TACOM and VPP, were applied to this study. • The task complexity was positively related with the operator’s procedural variability. • The VPP measure can be useful for explaining the operator’s behaviors. - Abstract: In this study, the relation between task complexity and variability of procedure progression during an emergency operation was investigated by comparing the two quantitative measures. To this end, the TACOM measure and VPP measure were applied to evaluate the complexity of tasks and variability of procedure progression, respectively. The TACOM scores and VPP scores were obtained for 60 tasks in the OPERA database, and a correlation analysis between two measures and a multiple regression analysis between the sub-measures of the TACOM measure and VPP measure were conducted. The results showed that the TACOM measure is positively associated with the VPP measure, and the abstraction hierarchy complexity mainly affected the variability among the sub-measures of TACOM. From these findings, it was discussed that the task complexity is related to an operator’s procedural variability and VPP measure can be useful for explaining the operator’s behaviors

  2. Slew Cranes in Shipyards: A Study

    Science.gov (United States)

    1985-01-01

    yard in Germany and one in Malaysia , carried out the corrosion preventive shot blasting and repainting recommended by the manufacturers. The general...the guidance of Osha (USA) or VBG-9 (W. Germany) — it is up to. the operator, however, to use the crane safely. In ensuring operator safety, an owner

  3. The development of a quantitative measure for the complexity of emergency tasks stipulated in emergency operating procedures of nuclear power plants

    International Nuclear Information System (INIS)

    Park, Jin Kyun; Jung, Won Dea

    2006-11-01

    Previous studies have continuously pointed out that human performance is a decisive factor affecting the safety of complicated process systems. Subsequently, as the result of extensive efforts, it has been revealed that the provision of procedures is one of the most effective countermeasures, especially if human operators have to carry out their tasks under a very stressful environment. That is, since good procedures are helpful to not only enhance the performance of human operators but also the reduction of the possibility of a human error through stipulating detailed tasks to be done by human operators. Ironically, it has been emphasized that the performance of human operators could be impaired due to complicated procedures, because procedures directly govern the physical as well as cognitive behavior of human operators by institutionalizing detailed actions. Therefore, it is a prerequisite to develop a systematic framework that properly evaluate the complexity of tasks described in procedures. For this reason, a measure called TACOM (Task Complexity) that can quantify the complexity of emergency tasks described in the emergency operating procedures (EOPs) of NPPs has been developed. In this report, a technical background as well as practical steps to quantify the complexity of tasks were presented with a series of studies that were conducted to ensure the validity of the TACOM measure. As a result of validation studies, since it is shown that the TACOM measure seem to properly quantify the complexity of emergency tasks, it is desirable that the TACOM measure plays an important role in improving the performance of human operators

  4. The development of a quantitative measure for the complexity of emergency tasks stipulated in emergency operating procedures of nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Kyun; Jung, Won Dea

    2006-11-15

    Previous studies have continuously pointed out that human performance is a decisive factor affecting the safety of complicated process systems. Subsequently, as the result of extensive efforts, it has been revealed that the provision of procedures is one of the most effective countermeasures, especially if human operators have to carry out their tasks under a very stressful environment. That is, since good procedures are helpful to not only enhance the performance of human operators but also the reduction of the possibility of a human error through stipulating detailed tasks to be done by human operators. Ironically, it has been emphasized that the performance of human operators could be impaired due to complicated procedures, because procedures directly govern the physical as well as cognitive behavior of human operators by institutionalizing detailed actions. Therefore, it is a prerequisite to develop a systematic framework that properly evaluate the complexity of tasks described in procedures. For this reason, a measure called TACOM (Task Complexity) that can quantify the complexity of emergency tasks described in the emergency operating procedures (EOPs) of NPPs has been developed. In this report, a technical background as well as practical steps to quantify the complexity of tasks were presented with a series of studies that were conducted to ensure the validity of the TACOM measure. As a result of validation studies, since it is shown that the TACOM measure seem to properly quantify the complexity of emergency tasks, it is desirable that the TACOM measure plays an important role in improving the performance of human operators.

  5. A study on development of the step complexity measure for emergency operating procedures using entropy concepts

    International Nuclear Information System (INIS)

    Park, J. K.; Jung, W. D.; Kim, J. W.; Ha, J. J.

    2001-04-01

    In complex systems, such as nuclear power plants (NPPs) or airplane control systems, human errors play a major role in many accidents. For example, it was reported that about 70% of aviation accidents are due to human errors, and that approximately 28% of accidents in process industries are caused by human errors. According to related studies, written manuals or operating procedures are revealed as one of the most important factors in aviation and manufacturing industries. In case of NPPs, the importance of procedures is more salient than other industries because not only over 50% of human errors were due to procedures but also about 18% of accidents were caused by the failure of following procedures. Thus, the provision of emergency operating procedures (EOPs) that are designed so that the possibility of human errors can be reduced is very important. To accomplish this goal, a quantitative and objective measure that can evaluate EOPs is indispensable. The purpose of this study is the development of a method that can quantify the complexity of a step included in EOPs. In this regard, the step complexity measure (SC) is developed based on three sub-measures such as the SIC (step information complexity), the SLC (step logic complexity) and the SSC (step size complexity). To verify the SC measure, not only quantitative validations (such as comparing SC scores with subjective evaluation results and with averaged step performance time) but also qualitative validations to clarify physical meanings of the SC measure are performed

  6. A study on development of the step complexity measure for emergency operating procedures using entropy concepts

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. K.; Jung, W. D.; Kim, J. W.; Ha, J. J

    2001-04-01

    In complex systems, such as nuclear power plants (NPPs) or airplane control systems, human errors play a major role in many accidents. For example, it was reported that about 70% of aviation accidents are due to human errors, and that approximately 28% of accidents in process industries are caused by human errors. According to related studies, written manuals or operating procedures are revealed as one of the most important factors in aviation and manufacturing industries. In case of NPPs, the importance of procedures is more salient than other industries because not only over 50% of human errors were due to procedures but also about 18% of accidents were caused by the failure of following procedures. Thus, the provision of emergency operating procedures (EOPs) that are designed so that the possibility of human errors can be reduced is very important. To accomplish this goal, a quantitative and objective measure that can evaluate EOPs is indispensable. The purpose of this study is the development of a method that can quantify the complexity of a step included in EOPs. In this regard, the step complexity measure (SC) is developed based on three sub-measures such as the SIC (step information complexity), the SLC (step logic complexity) and the SSC (step size complexity). To verify the SC measure, not only quantitative validations (such as comparing SC scores with subjective evaluation results and with averaged step performance time) but also qualitative validations to clarify physical meanings of the SC measure are performed.

  7. Computer Simulation of Complex Power System Faults under various Operating Conditions

    International Nuclear Information System (INIS)

    Khandelwal, Tanuj; Bowman, Mark

    2015-01-01

    A power system is normally treated as a balanced symmetrical three-phase network. When a fault occurs, the symmetry is normally upset, resulting in unbalanced currents and voltages appearing in the network. For the correct application of protection equipment, it is essential to know the fault current distribution throughout the system and the voltages in different parts of the system due to the fault. There may be situations where protection engineers have to analyze faults that are more complex than simple shunt faults. One type of complex fault is an open phase condition that can result from a fallen conductor or failure of a breaker pole. In the former case, the condition is often accompanied by a fault detectable with normal relaying. In the latter case, the condition may be undetected by standard line relaying. The effect on a generator is dependent on the location of the open phase and the load level. If an open phase occurs between the generator terminals and the high-voltage side of the GSU in the switchyard, and the generator is at full load, damaging negative sequence current can be generated. However, for the same operating condition, an open conductor at the incoming transmission lines located in the switchyard can result in minimal negative sequence current. In 2012, a nuclear power generating station (NPGS) suffered series or open phase fault due to insulator mechanical failure in the 345 kV switchyard. This resulted in both reactor units tripping offline in two separate incidents. Series fault on one of the phases resulted in voltage imbalance that was not detected by the degraded voltage relays. These under-voltage relays did not initiate a start signal to the emergency diesel generators (EDG) because they sensed adequate voltage on the remaining phases exposing a design vulnerability. This paper is intended to help protection engineers calculate complex circuit faults like open phase condition using computer program. The impact of this type of

  8. Electricity Networks: Infrastructure and Operations. Too complex for a resource?

    Energy Technology Data Exchange (ETDEWEB)

    Volk, Dennis

    2013-07-01

    Electricity security remains a priority of energy policy and continuous electrification will further enhance the importance in the years to come. Market liberalisation has brought substantial benefits to societies, including competition, innovation, more client-oriented services and the reduced needs for public expenditure. Further, the path of decarbonisation is a must but experiences with many new technologies and policies show their many implications on power systems. Electricity networks form the backbone of reliable and affordable power systems and also significantly support the inception of renewable generation. The importance of distribution and transmission networks has to be well understood by policy makers and regulators to maintain the sensitive balance within the policy triangle of reliability, affordability and sustainability as power systems rapidly change. Failures in choosing the right institutions and regulatory frameworks to operate and build networks will put the sensitive balance within the policy triangle at risk. ''Too complex for a resource?'' identifies the key challenges the electricity distribution and transmission networks face today and in the future. It further provides for best practice examples on institutional design choices and regulatory frameworks for sound network service provision but also highlights the importance of additional responses required. More market-based and dynamic frameworks for various system services, the growing need for active service participation of renewable generators and highly independent and transparent central operators seem to be at the heart of these responses. ''Too complex for a resource?'' finds that the answer to the challenges ahead is not always more infrastructure and that networks and the services they provide have to be regarded as equal part of the total power system. Thus, accurate and dynamic cost allocation can significantly support to transform

  9. Groundwater Monitoring Plan for the Reactor Technology Complex Operable Unit 2-13

    International Nuclear Information System (INIS)

    Richard P. Wells

    2007-01-01

    This Groundwater Monitoring Plan describes the objectives, activities, and assessments that will be performed to support the on-going groundwater monitoring requirements at the Reactor Technology Complex, formerly the Test Reactor Area (TRA). The requirements for groundwater monitoring were stipulated in the Final Record of Decision for Test Reactor Area, Operable Unit 2-13, signed in December 1997. The monitoring requirements were modified by the First Five-Year Review Report for the Test Reactor Area, Operable Unit 2-13, at the Idaho National Engineering and Environmental Laboratory to focus on those contaminants of concern that warrant continued surveillance, including chromium, tritium, strontium-90, and cobalt-60. Based upon recommendations provided in the Annual Groundwater Monitoring Status Report for 2006, the groundwater monitoring frequency was reduced to annually from twice a year

  10. Operation modes research of liquefied natural gas storages as a part of the ground complexes equipment

    Directory of Open Access Journals (Sweden)

    N. S. Korolev

    2014-01-01

    Full Text Available The use of the Liquefied Natural Gas (LNG in the space-rocket equipment is motivated by some advantages. That is why a lot of tests and works are actively carried out now on rocket engines using liquefied natural gas.To provide the engine tests and subsequent rocket complex operation a creation of LNG storages is demanded as a part of ground processing equipment and support for their safe operation conditions.One of LNG danger factor is its low boiling temperature, and also changing the condition, density and LNG boiling temperature at storage due to evaporation of light component, namely methane. At refill of the storages having fuel remains with a new LNG portion these factors can lead to formation of the stratified macro-layers and cause a mode of the intensive mixing that is called "rollover", with almost instant evaporation of LNG big mass and sharp pressure boost, capable to result in the storage distraction with catastrophic effects.The work objectives are formulated such as a technique development for forecasting of the LNG parameters in operating storages including the rollover mode, a comparison of calculated results of the LNG parameters with the experimental data, and a definition of possible recommendations for safe operation of LNG storages as a part of the ground complexes equipment.The paper reviews 12 publications concerning the issues and proceeding processes at operation of LNG storages, including the rollover mode.To verify the reliability of process simulation results in the LNG, represented in models by the binary methane-ethane mixture the calculated values have been compared with the experimental data for a LNG storage mode in the reservoir of a ground test complex.The reliability of developed models of the heat-mass-exchange processes in stratified on density and temperature in LNG storage with emergence of conditions for the rollover mode has been verified by comparing the settlement characteristics to the published

  11. Analysis of Operators Comments on the PSF Questionnaire of the Task Complexity Experiment 2003/2004

    Energy Technology Data Exchange (ETDEWEB)

    Torralba, B.; Martinez-Arias, R.

    2007-07-01

    Human Reliability Analysis (HRA) methods usually take into account the effect of Performance Shaping Factors (PSF). Therefore, the adequate treatment of PSFs in HRA of Probabilistic Safety Assessment (PSA) models has a crucial importance. There is an important need for collecting PSF data based on simulator experiments. During the task complexity experiment 2003-2004, carried out in the BWR simulator of Halden Man-Machine Laboratory (HAMMLAB), there was a data collection on PSF by means of a PSF Questionnaire. Seven crews (composed of shift supervisor, reactor operator and turbine operator) from Swedish Nuclear Power Plants participated in the experiment. The PSF Questionnaire collected data on the factors: procedures, training and experience, indications, controls, team management, team communication, individual work practice, available time for the tasks, number of tasks or information load, masking and seriousness. The main statistical significant results are presented on Performance Shaping Factors data collection and analysis of the task complexity experiment 2003/2004 (HWR-810). The analysis of the comments about PSFs, which were provided by operators on the PSF Questionnaire, is described. It has been summarised the comments provided for each PSF on the scenarios, using a content analysis technique. (Author)

  12. Analysis of Operators Comments on the PSF Questionnaire of the Task Complexity Experiment 2003/2004

    International Nuclear Information System (INIS)

    Torralba, B.; Martinez-Arias, R.

    2007-01-01

    Human Reliability Analysis (HRA) methods usually take into account the effect of Performance Shaping Factors (PSF). Therefore, the adequate treatment of PSFs in HRA of Probabilistic Safety Assessment (PSA) models has a crucial importance. There is an important need for collecting PSF data based on simulator experiments. During the task complexity experiment 2003-2004, carried out in the BWR simulator of Halden Man-Machine Laboratory (HAMMLAB), there was a data collection on PSF by means of a PSF Questionnaire. Seven crews (composed of shift supervisor, reactor operator and turbine operator) from Swedish Nuclear Power Plants participated in the experiment. The PSF Questionnaire collected data on the factors: procedures, training and experience, indications, controls, team management, team communication, individual work practice, available time for the tasks, number of tasks or information load, masking and seriousness. The main statistical significant results are presented on Performance Shaping Factors data collection and analysis of the task complexity experiment 2003/2004 (HWR-810). The analysis of the comments about PSFs, which were provided by operators on the PSF Questionnaire, is described. It has been summarised the comments provided for each PSF on the scenarios, using a content analysis technique. (Author)

  13. EDM - A model for optimising the short-term power operation of a complex hydroelectric network

    International Nuclear Information System (INIS)

    Tremblay, M.; Guillaud, C.

    1996-01-01

    In order to optimize the short-term power operation of a complex hydroelectric network, a new model called EDM was added to PROSPER, a water management analysis system developed by SNC-Lavalin. PROSPER is now divided into three parts: an optimization model (DDDP), a simulation model (ESOLIN), and an economic dispatch model (EDM) for the short-term operation. The operation of the KSEB hydroelectric system (located in southern India) with PROSPER was described. The long-term analysis with monthly time steps is assisted by the DDDP, and the daily analysis with hourly or half-hourly time steps is performed with the EDM model. 3 figs

  14. Research on a simulation-based ship production support system for middle-sized shipbuilding companies

    Science.gov (United States)

    Song, Young Joo; Woo, Jong Hun; Shin, Jong Gye

    2009-12-01

    Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

  15. Research on a simulation-based ship production support system for middle-sized shipbuilding companies

    Directory of Open Access Journals (Sweden)

    Young Joo Song

    2009-12-01

    Full Text Available Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

  16. Gas spark switches with increased operating life for Marx generator of lightning test complex

    Energy Technology Data Exchange (ETDEWEB)

    Bykov, Yu. A.; Krastelev, E. G., E-mail: ekrastelev@yandex.ru [Russian Academy of Sciences, Joint Institute for High Temperature (Russian Federation)

    2016-12-15

    A new design of gas spark switches with an increased operating life and stable dynamic characteristics for the Marx generator of the lightning test complex has been developed. The switches are characterized by the following parameters in the mode of operation: voltage up to 80 kV, discharge current up to 50 kA, flowing charge up to 3.5 C/pulse. An increased operating life is achieved by using torus-shaped electrodes with increased working surface area and a trigger electrode in the form of a thick disk with a hole located between them. Low breakdown delay time and high stability of breakdown voltage under dynamic conditions are provided by gas preionization in the spark gap using UV radiation of an additional corona discharge in the axial region.

  17. Use of eye tracking equipment for human reliability analysis applied to complex system operations

    International Nuclear Information System (INIS)

    Pinheiro, Andre Ricardo Mendonça; Prado, Eugenio Anselmo Pessoa do; Martins, Marcelo Ramos

    2017-01-01

    This article will discuss the preliminary results of an evaluation methodology for the analysis and quantification of manual character errors (human), by monitoring cognitive parameters and skill levels in the operation of a complex control system based on parameters provided by a eye monitoring equipment (Eye Tracker). The research was conducted using a simulator (game) that plays concepts of operation of a nuclear reactor with a split sample for evaluation of aspects of learning, knowledge and standard operating within the context addressed. bridge operators were monitored using the EYE TRACKING, eliminating the presence of the analyst in the evaluation of the operation, allowing the analysis of the results by means of multivariate statistical techniques within the scope of system reliability. The experiments aim to observe state change situations such as stops and scheduled departures, incidents assumptions and common operating characteristics. Preliminary results of this research object indicate that technical and cognitive aspects can contribute to improving the reliability of the available techniques in human reliability, making them more realistic both in the context of quantitative approaches to regulatory and training purposes, as well as reduced incidence of human error. (author)

  18. Use of eye tracking equipment for human reliability analysis applied to complex system operations

    Energy Technology Data Exchange (ETDEWEB)

    Pinheiro, Andre Ricardo Mendonça; Prado, Eugenio Anselmo Pessoa do; Martins, Marcelo Ramos, E-mail: andrericardopinheiro@usp.br, E-mail: eugenio.prado@labrisco.usp.br, E-mail: mrmatins@usp.br [Universidade de Sao Paulo (LABRISCO/USP), Sao Paulo, SP (Brazil). Lab. de Análise, Avaliação e Gerenciamento de Risco

    2017-07-01

    This article will discuss the preliminary results of an evaluation methodology for the analysis and quantification of manual character errors (human), by monitoring cognitive parameters and skill levels in the operation of a complex control system based on parameters provided by a eye monitoring equipment (Eye Tracker). The research was conducted using a simulator (game) that plays concepts of operation of a nuclear reactor with a split sample for evaluation of aspects of learning, knowledge and standard operating within the context addressed. bridge operators were monitored using the EYE TRACKING, eliminating the presence of the analyst in the evaluation of the operation, allowing the analysis of the results by means of multivariate statistical techniques within the scope of system reliability. The experiments aim to observe state change situations such as stops and scheduled departures, incidents assumptions and common operating characteristics. Preliminary results of this research object indicate that technical and cognitive aspects can contribute to improving the reliability of the available techniques in human reliability, making them more realistic both in the context of quantitative approaches to regulatory and training purposes, as well as reduced incidence of human error. (author)

  19. Information Design for Synchronization and Co-ordination of Modern, Complex, Multi-National Operations

    Science.gov (United States)

    2011-06-01

    1 16th ICCRTS Information design for synchronization and co-ordination of modern, complex, multi- national operations “Collective C2 in...REPORT DATE JUN 2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE Information design for synchronization and co...at 11th ICCRTS) who emphasise that information needs to be designed, not merely found or catalogued, to achieve synchronizations and co-ordinations

  20. Complex of Key Instruments of Management of Operation Activity of a Small Business Trade Enterprise

    Directory of Open Access Journals (Sweden)

    Serdyuk Vira M.

    2013-11-01

    Full Text Available The article offers a complex of key instruments of management of operation activity of a small business trade enterprise, including: 1 budgeting of operation activity; 2 its accounting by norms and deviations from them; 3 monitoring of operational activity of an enterprise, which envisages analysis of revealed deviations. The article shows the most efficient way of realisation and practical use of the presented concept – application of the “standard-cost” scheme within the framework of which the following tasks are solved: 1 budgeting of income from operational activity; 2 establishment of standards of costs; 3 accumulation of data on factual income and expenditures; 4 analysis of deviations and reporting; and 5 introduction of necessary amendments. The article also offers an imitation model of analysis of dynamics of trade processes, which allows detection of key spheres of management of operation activity of a small trade enterprise and principles of carrying out an efficient and well thought over financial policy.

  1. Operational Risk Defined Through a Complex Operating Environment

    Science.gov (United States)

    2015-02-26

    analysis . But the report noted that “CJTF-HOA’s presence in Africa offers benefits such as its ability to respond to contingencies, provide forces for...18 Analysis ...Development JOPP Joint Operations Planning Process NGO Non-Governmental Organization PRC Profitable Risk Control SWOT Strengths, Weaknesses

  2. Front-office/back-office configurations and operational performance in complex health services.

    Science.gov (United States)

    Gemmel, Paul; van Steenis, Thomas; Meijboom, Bert

    2014-01-01

    Acquired brain injury (ABI) occurs from various causes at different ages and leads to many different types of healthcare needs. Several Dutch ABI-networks installed a local co-ordination and contact point (CCP) which functions as a central and easily accessible service for people to consult when they have questions related to ABI. To explore the relationship between front/back office design and operational performance by investigating the particular enquiry service provided by different CCPs for people affected by an ABI. In-depth interviews with 14 FO/BO employees from three case organizations, complemented with information from desk research and three one-day field visits. The CCPs applied different FO/BO configurations in terms of customer contact and in terms of grouping of front and/or back office activities into tasks for one employee. It is the complexity of the enquiry that determines which approach is more appropriate. For complex enquiries, the level of decoupling is high in all CCPs. This allows multiple experts to be involved in the process. For regular enquiries, CCPs have a choice: either working in the same way as in the complex enquiries or coupling FO/BO activities to be able to serve clients faster and without handovers.

  3. Technology Transfer Program (TTP) Cost Accounting Final Report

    National Research Council Canada - National Science Library

    1980-01-01

    .... Shipbuilding Maritime Administration. The material contained herein was developed from the study of the Cost Accounting systems presently in operation in the shipyards of Ishikawajima-Harima Heavy Industries (IHI) of Japan...

  4. Solid Waste Operations Complex W-113: Project cost estimate. Preliminary design report. Volume IV

    International Nuclear Information System (INIS)

    1995-01-01

    This document contains Volume IV of the Preliminary Design Report for the Solid Waste Operations Complex W-113 which is the Project Cost Estimate and construction schedule. The estimate was developed based upon Title 1 material take-offs, budgetary equipment quotes and Raytheon historical in-house data. The W-113 project cost estimate and project construction schedule were integrated together to provide a resource loaded project network

  5. The Complex Gradient Operator and the CR-Calculus

    OpenAIRE

    Kreutz-Delgado, Ken

    2009-01-01

    A thorough discussion and development of the calculus of real-valued functions of complex-valued vectors is given using the framework of the Wirtinger Calculus. The presented material is suitable for exposition in an introductory Electrical Engineering graduate level course on the use of complex gradients and complex Hessian matrices, and has been successfully used in teaching at UC San Diego. Going beyond the commonly encountered treatments of the first-order complex vector calculus, second-...

  6. The appropriateness of TACOM for a task complexity measure for emergency operating procedures of nuclear power plants - A comparison with OPAS scores

    International Nuclear Information System (INIS)

    Park, Jinkyun; Jung, Wondea

    2007-01-01

    It is well known that complicated procedures frequently cause human performance related problems that can result in a serious consequence. Unfortunately a systematic framework to evaluate the complexity of procedures is very rare. For this reason Park et al. suggested a measure called TACOM (Task Complexity) which is able to quantify the complexity of tasks stipulated in procedures. In addition, it was observed that there is a significant correlation between averaged task performance time data and estimated TACOM scores. In this study, for an additional verification activity, TACOM scores are compared with operators' performance data that are measured by Operator Performance Assessment System (OPAS). As a result, it is believed that TACOM scores seem to be meaningfully correlated with OPAS scores. Thus, it is reasonable to expect that the result of this study can be regarded as a supplementary evidence for supporting the fact that TACOM measure is applicable for quantifying the complexity of tasks to be done by operators

  7. Toward humanoid robots for operations in complex urban environments

    Science.gov (United States)

    Pratt, Jerry E.; Neuhaus, Peter; Johnson, Matthew; Carff, John; Krupp, Ben

    2010-04-01

    Many infantry operations in urban environments, such as building clearing, are extremely dangerous and difficult and often result in high casualty rates. Despite the fast pace of technological progress in many other areas, the tactics and technology deployed for many of these dangerous urban operation have not changed much in the last 50 years. While robots have been extremely useful for improvised explosive device (IED) detonation, under-vehicle inspection, surveillance, and cave exploration, there is still no fieldable robot that can operate effectively in cluttered streets and inside buildings. Developing a fieldable robot that can maneuver in complex urban environments is challenging due to narrow corridors, stairs, rubble, doors and cluttered doorways, and other obstacles. Typical wheeled and tracked robots have trouble getting through most of these obstacles. A bipedal humanoid is ideally shaped for many of these obstacles because its legs are long and skinny. Therefore it has the potential to step over large barriers, gaps, rocks, and steps, yet squeeze through narrow passageways, and through narrow doorways. By being able to walk with one foot directly in front of the other, humanoids also have the potential to walk over narrow "balance beam" style objects and can cross a narrow row of stepping stones. We describe some recent advances in humanoid robots, particularly recovery from disturbances, such as pushes and walking over rough terrain. Our disturbance recovery algorithms are based on the concept of Capture Points. An N-Step Capture Point is a point on the ground in which a legged robot can step to in order to stop in N steps. The N-Step Capture Region is the set of all N-Step Capture Points. In order to walk without falling, a legged robot must step somewhere in the intersection between an N-Step Capture Region and the available footholds on the ground. We present results of push recovery using Capture Points on our humanoid robot M2V2.

  8. A METHODOLOGY FOR IMPROVING PRODUCTIVITY OF THE EXISTING SHIPBUILDING PROCESS USING MODERN PRODUCTION CONCEPTs AND THE AHP METHOD

    Directory of Open Access Journals (Sweden)

    Venesa Stanić

    2017-01-01

    Full Text Available In recent years, shipyards have been facing difficulties in controlling operational costs. To maintain continual operation of all of the facilities, a shipyard must analyze ways of utilizing present production systems for assembling interim vessel products as well as other types of industrial constructions. In the past, new machines continuously improved shipbuilding processes, including software and organizational restructuring, but management continued to search for a modern technological concept that will provide higher productivity, greater profit and overall reduction in costs. In the article the authors suggest implementing Design for Production, Design for Maintainability and Group Technology principles using the Analytical Hierarchy Process (AHP to apply to multi criteria decision making methods as an efficient tool for maintaining international competitiveness in the modern shipbuilding industry. This novel methodology is implemented through four phases. In the first phase, the present situation analysis is suggested for a real shipyard by establishing closest relations among production lines. The second phase presents a constraint analysis that must be evaluated when developing the design solution. The third phase involves generating a typical number of selected alternatives of the Design for Production, Design for Maintainability and Group Technology principles. In the fourth phase, the optimal design solution is selected using the Analytical Hierarchy Process (AHP method. The solution incorporating this modern methodology will improve productivity, profit and lead to decreasing operational costs.

  9. The human factor in operation and maintenance of complex high-reliability systems

    International Nuclear Information System (INIS)

    Ryan, T.G.

    1989-01-01

    Human factors issues in probabilistic risk assessment (PRAs) of complex high-reliability systems are addressed. These PRAs influence system operation and technical support programs such as maintainability, test, and surveillance. Using the U.S. commercial nuclear power industry as the setting, the paper addresses the manner in which PRAs currently treat human performance, the state of quantification methods and source data for analyzing human performance, and the role of human factors specialist in the analysis. The paper concludes with a presentation of TALENT, an emerging concept for fully integrating broad-based human factors expertise into the PRA process, is presented. 47 refs

  10. Exploring of Wireless Technology to Provide Information Sharing Among Military, United Nations and Civilian Organizations During Complex Humanitarian Emergencies and Peacekeeping Operations

    National Research Council Canada - National Science Library

    Bridges, Douglas

    2003-01-01

    ...) and peacekeeping operations. Humanitarian emergencies and peacekeeping operations are a complex mix of related activities that require the combined efforts of the UN, military, International Organizations (IOs...

  11. Operational planning optimization of steam power plants considering equipment failure in petrochemical complex

    International Nuclear Information System (INIS)

    Luo, Xianglong; Zhang, Bingjian; Chen, Ying; Mo, Songping

    2013-01-01

    Highlights: ► We develop a systematic programming methodology to address equipment failure. ► We classify different operation conditions into real periods and virtual periods. ► The formulated MILP models guarantee cost reduction and enough operation safety. ► The consideration of reserving operation redundancy is effective. - Abstract: One or more interconnected steam power plants (SPPs) are constructed in a petrochemical complex to supply utility energy to the process. To avoid large economic penalties or process shutdowns, these SPPs should be flexible and reliable enough to meet the process energy requirement under varying conditions. Unexpected utility equipment failure is inevitable and difficult to be predicted. Most of the conventional methods are based on the assumption that SPPs do not experience any kind of equipment failure. Unfortunately, a process shutdown cannot be avoided when equipment fails unexpectedly. In this paper, a systematic methodology is presented to minimize the total cost under normal conditions while reserving enough flexibility and safety for unexpected equipment failure conditions. The proposed method transforms the different conditions into real periods to indicate normal scenarios and virtual periods to indicate unexpected equipment failure scenarios. The optimization strategy incorporating various operation redundancy scheduling, the transition constraints from equipment failure conditions to normal conditions, and the boiler load increase behavior modeling are presented to save cost and guarantee operation safety. A detailed industrial case study shows that the proposed systematic methodology is effective and practical in coping with equipment failure conditions with only few additional cost penalties

  12. Cyberspace as a Complex Adaptive System and the Policy and Operational Implications for Cyber Warfare

    Science.gov (United States)

    2014-05-22

    victims would fall prey to the attack vector. Both state and non-state actors alike, driven by a combination of intrinsic and extrinsic motivations ...different roles, motivations , and intentions. Associated complexities of safeguarding cyberspace contribute to the lack of a United States (US... psychological operations. The infosphere is also the entity that DOD doctrine refers to as the information environment in which humans and automated

  13. Radiological and chemical source terms for Solid Waste Operations Complex

    International Nuclear Information System (INIS)

    Boothe, G.F.

    1994-01-01

    The purpose of this document is to describe the radiological and chemical source terms for the major projects of the Solid Waste Operations Complex (SWOC), including Project W-112, Project W-133 and Project W-100 (WRAP 2A). For purposes of this document, the term ''source term'' means the design basis inventory. All of the SWOC source terms involve the estimation of the radiological and chemical contents of various waste packages from different waste streams, and the inventories of these packages within facilities or within a scope of operations. The composition of some of the waste is not known precisely; consequently, conservative assumptions were made to ensure that the source term represents a bounding case (i.e., it is expected that the source term would not be exceeded). As better information is obtained on the radiological and chemical contents of waste packages and more accurate facility specific models are developed, this document should be revised as appropriate. Radiological source terms are needed to perform shielding and external dose calculations, to estimate routine airborne releases, to perform release calculations and dose estimates for safety documentation, to calculate the maximum possible fire loss and specific source terms for individual fire areas, etc. Chemical source terms (i.e., inventories of combustible, flammable, explosive or hazardous chemicals) are used to determine combustible loading, fire protection requirements, personnel exposures to hazardous chemicals from routine and accident conditions, and a wide variety of other safety and environmental requirements

  14. The role of human performance in safe operation of complex plants

    International Nuclear Information System (INIS)

    Preda, Irina Aida; Lazar, Roxana Elena; Croitoru, Cornelia

    1999-01-01

    According to statistics, about 20-30% from the failures occurring in plants are caused directly or indirectly by human errors. Furthermore, it was established that 10-15 percents of the global failures are related to the human errors. These are mainly due to the wrong actions, maintenance errors, and misinterpretation of instruments. The human performance is influenced by: professional ability, complexity and danger of the plant, experience in the same working place, level of skills, events in personal and/or professional life, discipline, social ambience and somatic health. The human performances assessment in the probabilistic safety assessment offers the possibility of evaluation for human contribution to the events sequences outcome. A human error may be recovered before the unwanted consequences had been occurred on system. This paper presents the possibilities to use the probabilistic methods (event tree, fault tree) to identify the solution for human reliability improvement in order to minimise the risk in industrial plant operation. Also, are defined the human error types and their causes and the 'decision tree method' is presented as technique in our analyses for human reliability assessment. The exemplification of human error analysis method was achieved based on operation data for Valcea heavy water pilot plant. (authors)

  15. Computer aided operation of complex systems

    International Nuclear Information System (INIS)

    Goodstein, L.P.

    1985-09-01

    Advanced technology is having the effect that industrial systems are becoming more highly automated and do not rely on human intervention for the control of normally planned and/or predicted situations. Thus the importance of the operator has shifted from being a manual controller to becoming more of a systems manager and supervisory controller. At the same time, the use of advanced information technology in the control room and its potential impact on human-machine capabilities places additional demands on the designer. This report deals with work carried out to describe the plant-operator relationship in order to systematize the design and evaluation of suitable information systems in the control room. This design process starts with the control requirements from the plant and transforms them into corresponding sets of decision-making tasks with appropriate allocation of responsibilities between computer and operator. To further effectivize this cooperation, appropriate information display and accession are identified. The conceptual work has been supported by experimental studies on a small-scale simulator. (author)

  16. MODELING OF OPERATION MODES OF SHIP POWER PLANT OF COMBINED PROPULSION COMPLEX WITH CONTROL SYSTEM BASED ON ELECTRONIC CONTROLLERS

    Directory of Open Access Journals (Sweden)

    E. A. Yushkov

    2016-12-01

    Full Text Available Purpose. Designing of diagrams to optimize mathematic model of the ship power plant (SPP combined propulsion complexes (CPC for decreasing operational loss and increasing fuel efficiency with simultaneous load limiting on medium revolutions diesel generator (MRDG by criterion reducing of wear and increasing operation time between repairs. Methodology. After analyzing of ship power plant modes of CPC proposed diagrams to optimize mathematic model of the above mentioned complex. The model based on using of electronic controllers in automatic regulation and control systems for diesel and thruster which allow to actualize more complicated control algorithm with viewpoint of increasing working efficiency of ship power plant at normal and emergency modes. Results. Determined suitability of comparative computer modeling in MatLab Simulink for building of imitation model objects based on it block diagrams and mathematic descriptions. Actualized diagrams to optimize mathematic model of the ship’s power plant (SPP combined propulsion complexes (CPC with Azipod system in MatLab Simulink software package Ships_CPC for decreasing operational loss and increasing fuel efficiency with simultaneous load limiting on medium revolutions diesel generator (MRDG by criterion reducing of wear and increasing operation time between repairs. The function blocks of proposed complex are the main structural units which allow to investigate it normal and emergency modes. Originality. This model represents a set of functional blocks of the components SPP CPC, built on the principle of «input-output». For example, the function boxes outputs of PID-regulators of MRDG depends from set excitation voltage and rotating frequency that in turn depends from power-station load and respond that is a ship moving or dynamically positioning, and come on input (inputs of thruster rotating frequency PID-regulator models. Practical value. The results of researches planned to use in

  17. Automated Visual Inspection of Ship Hull Surfaces Using the Wavelet Transform

    Directory of Open Access Journals (Sweden)

    Carlos Fernández-Isla

    2013-01-01

    Full Text Available A new online visual inspection technique is proposed, based on a wavelet reconstruction scheme over images obtained from the hull. This type of visual inspection to detect defects in hull surfaces is commonly carried out at shipyards by human inspectors before the hull repair task starts. We propose the use of Shannon entropy for automatic selection of the band for image reconstruction which provides a low decomposition level, thus avoiding excessive degradation of the image, allowing more precise defect segmentation. The proposed method here is capable of on-line assisting to a robotic system to perform grit blasting operations over damage areas of ship hulls. This solution allows a reliable and cost-effective operation for hull grit spot blasting. A prototype of the automated blasting system has been developed and tested in the Spanish NAVANTIA shipyards.

  18. Complexity factors and prediction of performance

    International Nuclear Information System (INIS)

    Braarud, Per Oeyvind

    1998-03-01

    Understanding of what makes a control room situation difficult to handle is important when studying operator performance, both with respect to prediction as well as improvement of the human performance. A factor analytic approach identified eight factors from operators' answers to an 39 item questionnaire about complexity of the operator's task in the control room. A Complexity Profiling Questionnaire was developed, based on the factor analytic results from the operators' conception of complexity. The validity of the identified complexity factors was studied by prediction of crew performance and prediction of plant performance from ratings of the complexity of scenarios. The scenarios were rated by both process experts and the operators participating in the scenarios, using the Complexity Profiling Questionnaire. The process experts' complexity ratings predicted both crew performance and plant performance, while the operators' rating predicted plant performance only. The results reported are from initial studies of complexity, and imply a promising potential for further studies of the concept. The approach used in the study as well as the reported results are discussed. A chapter about the structure of the conception of complexity, and a chapter about further research conclude the report. (author)

  19. How to Commission, Operate and Maintain a Large Future Accelerator Complex From Far Remote Sites

    International Nuclear Information System (INIS)

    Phinney, Nan

    2001-01-01

    A study on future large accelerators [1] has considered a facility, which is designed, built and operated by a worldwide collaboration of equal partner institutions, and which is remote from most of these institutions. The full range of operation was considered including commissioning, machine development, maintenance, trouble shooting and repair. Experience from existing accelerators confirms that most of these activities are already performed remotely. The large high-energy physics experiments and astronomy projects, already involve international collaborations of distant institutions. Based on this experience, the prospects for a machine operated remotely from far sites are encouraging. Experts from each laboratory would remain at their home institution but continue to participate in the operation of the machine after construction. Experts are required to be on site only during initial commissioning and for particularly difficult problems. Repairs require an on-site non-expert maintenance crew. Most of the interventions can be made without an expert and many of the rest resolved with remote assistance. There appears to be no technical obstacle to controlling an accelerator from a distance. The major challenge is to solve the complex management and communication problems

  20. How to Commission, Operate and Maintain a Large Future Accelerator Complex From Far Remote Sites

    Energy Technology Data Exchange (ETDEWEB)

    Phinney, Nan

    2001-12-07

    A study on future large accelerators [1] has considered a facility, which is designed, built and operated by a worldwide collaboration of equal partner institutions, and which is remote from most of these institutions. The full range of operation was considered including commissioning, machine development, maintenance, troubleshooting and repair. Experience from existing accelerators confirms that most of these activities are already performed 'remotely'. The large high-energy physics experiments and astronomy projects, already involve international collaborations of distant institutions. Based on this experience, the prospects for a machine operated remotely from far sites are encouraging. Experts from each laboratory would remain at their home institution but continue to participate in the operation of the machine after construction. Experts are required to be on site only during initial commissioning and for particularly difficult problems. Repairs require an on-site non-expert maintenance crew. Most of the interventions can be made without an expert and many of the rest resolved with remote assistance. There appears to be no technical obstacle to controlling an accelerator from a distance. The major challenge is to solve the complex management and communication problems.

  1. The North Sea contracting industry. 2. ed.

    International Nuclear Information System (INIS)

    Wright, Peter

    1999-08-01

    Contains Executive Summary and Chapters on: Introduction; Technology trends; CRINE and Norsok; Contracting strategies; Market trends; Industry segmentation and structure; Trends by segment; Integrated service contractors; Engineering contractors and consultants; Fabricators and shipyards; Installation contractors; Maintenance operations and production contractors. (Author)

  2. A study on the identification of cognitive complexity factors related to the complexity of procedural steps

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Kyun; Jeong, Kwang Sup; Jung, Won Dea [KAERI, Taejon (Korea, Republic of)

    2004-07-01

    In complex systems, it is well recognized that the provision of understandable procedures that allow operators to clarify 'what needs to be done' and 'how to do it' is one of the requisites to confirm their safety. In this regard, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is evinced from the comparisons between SC scores and operators' performance data. To this end, the comparisons between operators' performance data with their behavior in conducting prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect operators' cognitive burden are identified. Although a well-designed experiment is indispensable in confirming the appropriateness of cognitive complexity factors, it is strongly believed that the change of an operator's performance can be more authentically explained if they are taken into consideration.

  3. A study on the identification of cognitive complexity factors related to the complexity of procedural steps

    International Nuclear Information System (INIS)

    Park, Jin Kyun; Jeong, Kwang Sup; Jung, Won Dea

    2004-01-01

    In complex systems, it is well recognized that the provision of understandable procedures that allow operators to clarify 'what needs to be done' and 'how to do it' is one of the requisites to confirm their safety. In this regard, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is evinced from the comparisons between SC scores and operators' performance data. To this end, the comparisons between operators' performance data with their behavior in conducting prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect operators' cognitive burden are identified. Although a well-designed experiment is indispensable in confirming the appropriateness of cognitive complexity factors, it is strongly believed that the change of an operator's performance can be more authentically explained if they are taken into consideration

  4. Transition Complexity of Incomplete DFAs

    Directory of Open Access Journals (Sweden)

    Yuan Gao

    2010-08-01

    Full Text Available In this paper, we consider the transition complexity of regular languages based on the incomplete deterministic finite automata. A number of results on Boolean operations have been obtained. It is shown that the transition complexity results for union and complementation are very different from the state complexity results for the same operations. However, for intersection, the transition complexity result is similar to that of state complexity.

  5. Environmental assessment report: Nuclear Test Technology Complex. [Construction and operation of proposed facility

    Energy Technology Data Exchange (ETDEWEB)

    Tonnessen, K.; Tewes, H.A.

    1982-08-01

    The US Department of Energy (USDOE) is planning to construct and operate a structure, designated the Nuclear Test Technology Complex (NTTC), on a site located west of and adjacent to the Lawrence Livermore National Laboratory. The NTTC is designed to house 350 nuclear test program personnel, and will accommodate the needs of the entire staff of the continuing Nuclear Test Program (NTP). The project has three phases: land acquisition, facility construction and facility operation. The purpose of this environmental assessment report is to describe the activities associated with the three phases of the NTTC project and to evaluate potential environmental disruptions. The project site is located in a rural area of southeastern Alameda County, California, where the primary land use is agriculture; however, the County has zoned the area for industrial development. The environmental impacts of the project include surface disturbance, high noise levels, possible increases in site erosion, and decreased air quality. These impacts will occur primarily during the construction phase of the NTTC project and can be mitigated in part by measures proposed in this report.

  6. Matrix elements of the electric multiple transition and relativistic correction operators in the case of complex configurations

    International Nuclear Information System (INIS)

    Kanyauskas, Yu.M.; Rudzikas, Z.B.

    1976-01-01

    Operators and their submatrix elements are studied in the framework of the electric multipole transitions of complex atoms with account of relativistic corrections of the order of the square of the fine structure constant. The analysis is performed by means of irreducible tensor operators and genealogical coefficients. It has been assumed that angular momenta of individual shells are coupled with each other according to ls, lk, jk and jj coupling. Formulas are given for the operator which causes the relativistic corrections for the single-electron multipole transition and for its submatrix element in the case of configurations with two unfilled shells. A possibility is discussed of using the formulas suggested for calculation. As follows from analysis, the relativistic correction operators even with the pure ls coupling allow intercombination transitions with ΔS equals +-1. The expressions obtained may turn out to be useful for performing calculations in the case of the intermediate type of coupling

  7. CALS - What are the Potentials for SMEs ?

    DEFF Research Database (Denmark)

    Bilberg, Arne; Larsen, Michael holm; Langer, Gilad

    1996-01-01

    The Danish CALS Center initiative, aims at making CALS operational in Danish industry. The center consists of three Danish companies, Bang & Olufsen, Odense Steel Shipyard, Nilfisk besides from the Technical University of Denmark and the Danish Technological Institute. The objective is to demonst...

  8. The role of human performance in the safety complex plants' operation

    International Nuclear Information System (INIS)

    Preda, Irina Aida; Lazar, Roxana Elena; Croitoru, Cornelia

    1999-01-01

    According to statistics, about 20-30% from the failures occurred in the plants are caused directly or indirectly by human errors. Furthermore, it was established that 10-15% of the global failures are related with the human errors. These are mainly due to the wrong actions, maintenance errors, and misinterpretation of instruments. The human performance is influenced by: professional ability, complexity and danger to the plant experience in the working place, level of skills, events in personal and/or professional life, discipline, social ambience, somatic health. The human performances' assessment in the probabilistic safety assessment offers the possibility of evaluation of human contribution to the events sequences outcome. Not all the human errors have impact on the system. A human error may be recovered before the unwanted consequences had been occurred on system. This paper presents the possibilities to use the probabilistic method (event tree, fault tree) to identify the solutions for human reliability improved in order to minimize the risk in industrial plants' operation. Also, the human error types and their causes are defined and the 'decision tree method' as technique in our analysis for human reliability assessment is presented. The exemplification of human error analysis method was achieved based on operation data for Valcea Heavy Water Pilot Plant. As initiating event for the accident state 'the steam supply interruption' event has been considered. The human errors' contribution was analysed for the accident sequence with the worst consequences. (authors)

  9. Outcomes and Short-Term Follow-Up in Complex Ross Operations in Pediatric Patients Undergoing Damus-Kaye-Stansel Takedown.

    Science.gov (United States)

    Baird, Christopher W; Zurakowski, David; Bueno, Alejandra; Borisuk, Michele J; Raju, Vijayakumar; Mokashi, Suyog A; Emani, Sitaram; Marx, Gerald R; Del Nido, Pedro J

    2016-01-01

    Review echocardiography and outcomes before and after Ross procedures, including patients undergoing biventricular conversion with Damus-Kaye-Stansel (DKS) takedown. A retrospective review was performed on 62 patients undergoing simple (control group) and complex Ross procedures, including 12 patients who underwent biventricular conversion with Ross operation and DKS takedown (complex). Echocardiography was reviewed preoperatively and at discharge and late follow-up. Kaplan-Meier estimates of patient survival and freedom from reintervention were obtained. In all, 62 patients had a median age of 4.5 years (interquartile range [IQR]: 1-12.5), weight of 16.4kg (IQR: 8-41), and follow-up of 3.8 years (IQR: 1.3-6). The complex DKS takedown group had 2 deaths, no neoaortic valve or root reinterventions, and 3 right ventricular outflow tract (VOT) reinterventions. There were no differences from the control group in left VOT or right VOT reinterventions. Neither group showed differences between pre- and late follow-up aortic root and ascending aorta dimensions, and no correlations were found among preoperative pulmonary valve (PV) size, late aortic regurgitation (AR), aortic root, or ascending aortic Z-scores. Aortic valve size increased from discharge to late follow-up for both groups (P ≤ .05); 90% of patients at late follow-up had mild or less AR with similar distributions in severity between complex and control groups. Severity of late AR showed no correlation with preoperative PV size and is independent of it. The Ross procedure has good short-term results in simple and complex patients and should be considered in those undergoing Ross operation with biventricular conversion and DKS takedown. Moreover, native PV size should not be a contraindication for Ross procedure. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. Action of the complex Monge-Ampère operator on piecewise-linear functions and exponential tropical varieties

    International Nuclear Information System (INIS)

    Kazarnovskii, B Ya

    2014-01-01

    We consider exponential tropical varieties, which appear as analogues of algebraic tropical varieties when we pass from algebraic varieties to varieties given by zero sets of systems of exponential sums. We describe a construction of exponential tropical varieties arising from the action of the complex Monge-Ampère operator on piecewise-linear functions and show that every such variety can be obtained in this way. As an application, we deduce a criterion for the vanishing of the value of the mixed Monge-Ampère operator. This is an analogue and generalization of the criterion for the vanishing of the mixed volume of convex bodies

  11. Universal operations in Hochschild homology

    DEFF Research Database (Denmark)

    Wahl, Nathalie

    2016-01-01

    operations is approximated by a certain chain complex of formal operations, for which we provide an explicit model that we can calculate in a number of cases. When E encodes the structure of open topological conformal field theories, we identify this last chain complex, up quasi-isomorphism, with the moduli...... space of Riemann surfaces with boundaries, thus establishing that the operations constructed by Costello and Kontsevich-Soibelman via different methods identify with all formal operations. When E encodes open topological quantum field theories (or symmetric Frobenius algebras) our chain complex...... topology operations, which had so far been elusive....

  12. Autonomous Task Primitives for Complex Manipulation Operations

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this research effort is to enable robots to autonomously perform the complex manipulation tasks that are necessary to maintain a spacecraft. Robots, like...

  13. Methodology of complexity analysis of Emergency Operating Procedures for Nuclear Power Plants; Metodologia de analisis de complejidad de Procedimientos de Operacion de Emergencia de Centrales Nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Martorell, P.; Martorell, S.; Marton, I.; Pelayo, F.; Mendizabal, R.

    2013-07-01

    The Emergency Operating Procedures (SOPs) set out the stages and contain actions to be executed by an operator to respond to an emergency situation. Methodologies are being developed to assess aspects such as complexity, completeness and vulnerability of these procedures. A methodology is presented in this paper to develop a network topology POE and analysis focused on the same complexity as a fundamental attribute.

  14. Operation safety of complex industrial systems. Main concepts

    International Nuclear Information System (INIS)

    Zwingelstein, G.

    2009-01-01

    Operation safety consists in knowing, evaluating, foreseeing, measuring and mastering the technological system and human failures in order to avoid their impacts on health and people's safety, on productivity, and on the environment, and to preserve the Earth's resources. This article recalls the main concepts of operation safety: 1 - evolutions in the domain; 2 - failures, missions and functions of a system and of its components: functional failure, missions and functions, industrial processes, notions of probability; 3 - basic concepts and operation safety: reliability, unreliability, failure density, failure rate, relations between them, availability, maintainability, safety. (J.S.)

  15. 76 FR 29011 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Fire...

    Science.gov (United States)

    2011-05-19

    ... for OMB Review; Comment Request; Fire Protection in Shipyard Employment ACTION: Notice. SUMMARY: The... information collection request (ICR) titled, ``Fire Protection in Shipyard Employment,'' to the Office of... Fire Protection in Shipyard Employment Standard makes it mandatory for a covered employer to develop a...

  16. Investigating the potential climate change impacts on maritime operations around the Southern African coast

    CSIR Research Space (South Africa)

    Rossouw, M

    2009-07-01

    Full Text Available shift • Structure and direction of trade (indirectly through impact on agriculture, fishing, energy) • Challenge to service reliability and increased dredging, reduced safety and sailing conditions • Changes in water levels in harbours... and landslide • Damage to infrastructure, equipment, cargo • Relocation and migration of people and business • Labour shortage and shipyard closure • Reduced safety and sailing conditions, challenge to service reliability • Modal shift, variation...

  17. Process Description and Operating History for the CPP-601/-640/-627 Fuel Reprocessing Complex at the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Wagner, E.P.

    1999-01-01

    The Fuel Reprocessing Complex (FRC) at the Idaho Nuclear Technology and Engineering Center at the Idaho National Engineering and Environmental Laboratory was used for reprocessing spent nuclear fuel from the early 1950's until 1992. The reprocessing facilities are now scheduled to be deactivated. As part of the deactivation process, three Resource Conservation and Recovery Act (RCRA) interim status units located in the complex must be closed. This document gathers the historical information necessary to provide a rational basis for the preparation of a comprehensive closure plan. Included are descriptions of process operations and the operating history of the FRC. A set of detailed tables record the service history and present status of the process vessels and transfer lines

  18. An innovative approach to sampling complex industrial emissions for use in animal toxicity tests: application to iron casting operations.

    Science.gov (United States)

    Palmer, W G; Scholz, R C; Moorman, W J

    1983-03-01

    Sampling of complex mixtures of airborne contaminants for chronic animal toxicity tests often involves numerous sampling devices, requires extensive sampling time, and yields forms of collected materials unsuitable for administration to animals. A method is described which used a high volume, wet venturi scrubber for collection of respirable fractions of emissions from iron foundry casting operations. The construction and operation of the sampler are presented along with collection efficiency data and its application to the preparation of large quantities of samples to be administered to animals by intratracheal instillation.

  19. The role of risk analysis in control of complex plants' safety operation

    International Nuclear Information System (INIS)

    Dumitrescu, Maria; Preda, Irina Aida; Lazar, Roxana Elena; Carcadea, Elena

    1999-01-01

    The problem of risk estimation, assessment and control is necessary to be discussed at every decision level of an activity. In this way the performances of a system, action or technology are qualitatively assessed by indicating the possible consequences on environmental, people or property. The paper presents methodologies of risk assessment successfully applied on isotopic separation plants. The quantitative methodologies presented use fault tree and event tree to determine the accident states frequency and physical models to analyse the dispersion in atmosphere of dangerous substances. The qualitative methodologies use fuzzy models for the multi-criteria decision making, models based on risk matrix built on the basis of a combination between severity and probability of maximum admissible consequence. These methodologies present the following steps for applying: familiarising with the activity in study, establishing the adequate method of risk assessment, realising of the model of risk assessment for the activity or objective in study, developing of application of the proposed model. Applying this methodology to isotopic separation plants has led to: analysis of operation events and establishing of principal types of events potentially dangerous, analysis of human error in these plants operation and operating experience assessment, technical specifications optimisation by probabilistic safety assessment, reliability analysis and development of reliability and exploitation events database, post accident events analysis (releases, fires, explosions) and mathematical modelling of dispersion in atmosphere of dangerous substances. The risk concept being complex and with multiple implications, it is not the case of a rigid approaching neither of existence of some methods universally valid. Because of these reasons choosing of the most appropriate method for the risk assessment of an activity, leads to solution in due time, of some problems with economic, social

  20. The role of risk analysis in control of complex plant safe operation

    International Nuclear Information System (INIS)

    Dumitrescu, Maria; Preda, Irina Aida; Lazar, Roxana Elena; Carcadea, Elena

    1999-01-01

    The problem of risk estimation assessment and control is necessary to be discussed in every decision making level of an activity. Performances of a system, action or technology, by indicating the possible consequences on environment, people or property should be qualitatively assessed. The paper presents methodologies of risk assessment successful applied on isotopic separation plants. The quantitative methodologies presented, use fault tree and event tree to determine the accident states frequency, physical models to analyse the dispersion in atmosphere of dangerous substances. The qualitative methodologies use the fuzzy models for the multicriterial decision making, models based on risk matrix build on the base of combination between the severity and the probability of maximum admissible consequence. These methodologies present the following steps for applying: familiarising with the activity in study, establishing the adequate method of risk assessment, building the model of risk assessment for the activity or objective in study, developing the applications of the proposed model. Applying this methodology to isotopic separation plants have led to: analysis of operation events and establishing of principal types of events potentially dangerous, analysis of human error in these plant operations and operating experience assessment, technical specifications for optimisation by probabilistic safety assessment, reliability analysis and development of reliability and exploitation of events database, post accident events analysis (releases, fires, explosions) and mathematical modelling of dispersion in atmosphere of dangerous substances. The risk concept being complex and with multiple implications, is not the case of a rigid approaching neither of existence of some methods universally valid. Because of these reasons, choosing of the most appropriate method for the risk assessment of an activity, leads to a solution in useful time, of some problems with economic, social

  1. The Analysis of Motion Dynamics and Resistance of the Multipurpose Boat Operating in Shallow Water

    Directory of Open Access Journals (Sweden)

    Jan Kulczyk

    2014-09-01

    Full Text Available Polish market of small boats has been developed very dynamically in recent years. Market competition forces the shipyards to build new more efficient hull forms and to cut the cost of production as well. This is why modern computer simulation programs are used more often by naval architects. Another trend is to design more universal ships that may be used by larger number of diversified customers. This paper presents project proposal of multipurpose boat hull form. The boat was design to fulfil the requirements imposed by public services like water police, fire brigades, and border guards. It is supposed to be operated on unexplored floodplains and other type shallow waters. The analysis of boat’s motion was based on computer simulations. The resistance curve was evaluated with two methods: comparison study of model test results of similar ships and CFD methods. The results obtained from Ansys Fluent and FINE/Marine systems were compared in this paper. It was shown that taking into consideration dynamic trim and sinkage has a significant impact on free surface capture and resistance values.

  2. Experimental control versus realism: methodological solutions for simulator studies in complex operating environments

    Energy Technology Data Exchange (ETDEWEB)

    Skraaning, Gyrd Jr.

    2004-03-15

    This report is a reprint of a dr.philos. thesis written by Gyrd Skraaning Jr. The text was submitted and accepted by the Norwegian University of Science and Technology in 2003 (ISBN 82-471-5237-1). The thesis suggests a nonlinear model of the theoretical relationship between experimental control and realism, claiming that high degrees of realism and experimental control can be obtained simultaneously if the experimental methods are utilized strategically and developed further. This is in opposition to the conventional opinion that realism and experimental control are mutually excluding objectives. The thesis debates the impact of the operating task on human performance during simulator studies in HAMMLAB, and suggests how task variation can be experimentally controlled. In a within subject design, every subject is tested under all experimental conditions, and the presentation order of the conditions is counterbalanced to compensate for order effects. In realistic settings, it is essential that the experimental design imposes few artificial constrains on the research environment. At the same time, the design should be able to uncover experimental effects in situations where the number of participants is low. Within-subject design represents a reasonable compromise between these aspirations. In this respect, an alternative counterbalancing method is proposed (dis-ORDER). A theoretical analysis of the human performance concept and a discussion about performance measurement in complex operating environments, are followed by a debate on the shortcomings of traditional performance indicators. Two specialized operator performance assessment techniques are then presented and evaluated (OPAS and ORT). (Author)

  3. Experimental control versus realism: methodological solutions for simulator studies in complex operating environments

    International Nuclear Information System (INIS)

    Skraaning, Gyrd Jr.

    2004-03-01

    This report is a reprint of a dr.philos. thesis written by Gyrd Skraaning Jr. The text was submitted and accepted by the Norwegian University of Science and Technology in 2003 (ISBN 82-471-5237-1). The thesis suggests a nonlinear model of the theoretical relationship between experimental control and realism, claiming that high degrees of realism and experimental control can be obtained simultaneously if the experimental methods are utilized strategically and developed further. This is in opposition to the conventional opinion that realism and experimental control are mutually excluding objectives. The thesis debates the impact of the operating task on human performance during simulator studies in HAMMLAB, and suggests how task variation can be experimentally controlled. In a within subject design, every subject is tested under all experimental conditions, and the presentation order of the conditions is counterbalanced to compensate for order effects. In realistic settings, it is essential that the experimental design imposes few artificial constrains on the research environment. At the same time, the design should be able to uncover experimental effects in situations where the number of participants is low. Within-subject design represents a reasonable compromise between these aspirations. In this respect, an alternative counterbalancing method is proposed (dis-ORDER). A theoretical analysis of the human performance concept and a discussion about performance measurement in complex operating environments, are followed by a debate on the shortcomings of traditional performance indicators. Two specialized operator performance assessment techniques are then presented and evaluated (OPAS and ORT). (Author)

  4. Subjective task complexity in the control room

    International Nuclear Information System (INIS)

    Braarud, Per Oeivind

    2000-05-01

    Understanding of what makes a control room situation difficult to handle is important when studying operator performance, both with respect to prediction as well as improvement of the human performance. Previous exploratory work on complexity showed a potential for prediction and explanation of operator performance. This report investigates in further detail the theoretical background and the structure of operator rated task complexity. The report complements the previous work on complexity to make a basis for development of operator performance analysis tools. The first part of the report outlines an approach for studying the complexity of the control room crew's work. The approach draws upon man-machine research as well as problem solving research. The approach identifies five complexity-shaping components: 'task work characteristics', 'teamwork characteristics', 'individual skill', 'teamwork skill', and 'interface and support systems'. The crew's work complexity is related to concepts of human performance quality and human error. The second part of the report is a post-hoc exploratory analysis of four empirical HRP studies, where operators' conception of the complexity of control room work is assessed by questionnaires. The analysis deals with the structure of complexity questionnaire ratings, and the relationship between complexity ratings and human performance measures. The main findings from the analysis of structure was the identification of three task work factors which were named Masking, Information load and Temporal demand, and in addition the identification of one interface factor which was named Navigation. Post-hoc analysis suggests that operator's subjective complexity, which was assessed by questionnaires, is related to workload, task and system performance, and operator's self-rated performance. (Author). 28 refs., 47 tabs

  5. Engineering models and methods for industrial cell control

    DEFF Research Database (Denmark)

    Lynggaard, Hans Jørgen Birk; Alting, Leo

    1997-01-01

    This paper is concerned with the engineering, i.e. the designing and making, of industrial cell control systems. The focus is on automated robot welding cells in the shipbuilding industry. The industrial research project defines models and methods for design and implemen-tation of computer based...... SHIPYARD.It is concluded that cell control technology provides for increased performance in production systems, and that the Cell Control Engineering concept reduces the effort for providing and operating high quality and high functionality cell control solutions for the industry....... control and monitor-ing systems for production cells. The project participants are The Danish Academy of Technical Sciences, the Institute of Manufacturing Engineering at the Technical University of Denmark and ODENSE STEEL SHIPYARD Ltd.The manufacturing environment and the current practice...

  6. THE REALITY OF OPERATIONAL ENVIRONMENT IN MILITARY OPERATIONS

    Directory of Open Access Journals (Sweden)

    Milan PODHOREC

    2012-01-01

    Full Text Available The strategic and operational environment affecting national security is complex, multifaceted and variable. Even in the long term, it will be characterized by high dynamics of changes, the growing diversity of players and increasingly complex interdependence of security trends and factors. Threats, risks and their sources are often difficult to localize and nowadays have mostly non-state and transnational character. Many of the specific threats and their impacts are difficult to predict. It all adds up to a further blurring of distinctions between internal and external national security. The operating environment consists of a set of factors arising from the nature of an area where the operation is carried out or will be. Operating environment is also formed by the character of a potential enemy, possibilities of effecting technological and informational areas and further by terrain, climatic conditions and level of own forces and coalition forces.

  7. Microencapsulation of citronella oil by complex coacervation using chitosan-gelatin (b system: operating design, preparation and characterization

    Directory of Open Access Journals (Sweden)

    Abdul Aziz Fitrah Rabani

    2016-01-01

    Full Text Available Citronella oil (CO can be an effective mosquito repellent, but due to its nature which having high volatility, oils rapidly evaporates causing loss of efficacy and shorten the repellent effect. Therefore, microencapsulation technology was implemented to ensure the encapsulated material being protected from immediate contact with environment and offers controlled release. In this study, microencapsulation of CO was done by employing complex coacervation using chitosan-gelatin (B system and utilized proanthocyanidins as the crosslinker. Remarkably, nearly all material involved in this study are from natural sources which are safe to human and environment. In designing operating process condition for CO encapsulation process, we found that wall ratio of 1:35 and pH 5 was the best operating condition based on zeta potential and turbidity analysis. FT-IR analysis found that gelatin-B had coated the CO droplet during emulsification stage, chitosan started to interact with gelatin-B to form a polyelectrolyte complex in adjust pH stage, CO capsules solidified at cooling process and were hardened during crosslinking process. Final product of CO capsules after settling process was identified at the top layer. Surface morphology of CO capsules obtained in this study were described having diameter varies from 81.63 µm to 156.74 µm with almost spherical in shape.

  8. Structure of Hilbert space operators

    CERN Document Server

    Jiang, Chunlan

    2006-01-01

    This book exposes the internal structure of non-self-adjoint operators acting on complex separable infinite dimensional Hilbert space, by analyzing and studying the commutant of operators. A unique presentation of the theorem of Cowen-Douglas operators is given. The authors take the strongly irreducible operator as a basic model, and find complete similarity invariants of Cowen-Douglas operators by using K -theory, complex geometry and operator algebra tools. Sample Chapter(s). Chapter 1: Background (153 KB). Contents: Jordan Standard Theorem and K 0 -Group; Approximate Jordan Theorem of Opera

  9. Complexity, Networking, & Effects-Based Approaches to Operations

    Science.gov (United States)

    2006-06-01

    from the recognition of the impossibility of trying to dissect this inherent complexity, e.g. the futility of understand- ing Shakespeare’s Hamlet by...may be essential to a particular task at hand. While we may not all be Shakespeares —or Churchills or Pat- tons for that matter—we have all been

  10. Operational Assessment of Controller Complexity, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In today's operations, acceptable levels of controller workload are maintained by assigning sector capacities based on simple aircraft count and a capacity threshold...

  11. Assessing Operational Situations

    DEFF Research Database (Denmark)

    Zhang, Xinxin

    In spite of the high level of automation commonly applied to today’s engineering system, humans’ skill and knowledge still plays a central role in the systems’ daily operation, critical decision making, and accident management. The complexity of the engineered system poses great challenge for human...... operators to perceive and understand the operational situation. The research domain of situation awareness approaches the operational challenges from the human cognition perspective while the presented thesis aims at supporting situation assessment from the system perspective. The thesis has reviewed...... different perspectives on situation awareness in the human factor studies and uses the knowledge reflectively for system representation and analysis. The human cognitive activities during complex plant operation and how they perceive a situation and what kind of knowledge has to be established in the human...

  12. Principle of an operational complexity index for the characterization of the human factor relevance of future reactors concepts

    International Nuclear Information System (INIS)

    Papin, Bernard

    2004-01-01

    With the increasing reliability of the modern technological systems, the human contribution to the global risk in the operation of industrial systems is becoming more and more significant : in the nuclear reactor operation for example, a recent PSA estimation of this contribution is about 25% of the risk of core melting, all situations considered. This urges the designers of future nuclear reactors to consider the minimisation of this Human Factor (HF) contribution, at the very early stage of their design : the experience feedback shows that this is indeed at this stage that the fundamental design options, impacting the most the human reliability in operation, are fixed. The problem is that at these early design stages, it is also quite impossible to apply formal human reliability methods to support this HF optimisation, while the precise operating conditions of the reactor are not yet known in enough details. In this paper, another approach of the HF evaluation during the design, based on the functional and operational complexity assessment, is proposed. As an illustration, this approach is used to compare various concepts of Pressurized Water Reactors from the point of view of the Human Factor relevance. (Author)

  13. New business opportunity: Green field project with new technology

    Directory of Open Access Journals (Sweden)

    Seung Jae Lee

    2014-06-01

    Full Text Available Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation

  14. New business opportunity: Green field project with new technology

    Science.gov (United States)

    Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

    2014-06-01

    Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

  15. Flow assurance : complex phase behavior and complex work requires confidence and vigilance

    Energy Technology Data Exchange (ETDEWEB)

    Brown, L.D. [ConocoPhillips, Major Projects, Advanced Integrated Simulation, Houston, TX (United States)

    2008-07-01

    Petroleum exploration and development projects and operations increasingly rely on flow assurance definition. Flow assurance is an integrating discipline as it follows the fluid from the reservoir to the market. Flow assurance works across complex technical and non-technical interfaces, including the reservoir, well completions, operation processes, project management, physical/organic chemistry, fluid mechanics, chemical engineering, mechanical engineering and corrosion. The phase behaviour in real fluids also has complex interfaces. The understanding and management of flow assurance of complex phase behaviour must be well communicated in order to enable proper selection, execution, and operation of development concepts designed to manage successful production within the fluid's phase behaviour. Simulation tools facilitate the translation of science into engineering. Academic, industrial, and field research is the core of these tools. The author cautioned that vigilance is required to assist and identify the right time to move innovation into the core tools.

  16. Depository of ampoule ionizing radiation sources on the basis of stand complex Baikal-I. Operation experience and application perspectives

    International Nuclear Information System (INIS)

    Ganzha, V.V.; Boltovskij, S.A.; Kolbaenkov, A.N.; Meshin, M.M.; Nasonov, S.G.; Pivovarov, O.S.; Storozhenko, A.S.; Yakovlev, V.V.

    2001-01-01

    Depository of ampoule sources of ionizing radiation (ASIR) on the basis of stand complex Baikal-I was founded an put into operation in 1995. It is intended for prolonged storage of the spent ASIR from a different institutions of Kazakhstan. To the present time a more than 10000 spent ASIR with activity more than 2000 Ci were taken and placed for storage

  17. Efficient quantum repeater with respect to both entanglement-concentration rate and complexity of local operations and classical communication

    Science.gov (United States)

    Su, Zhaofeng; Guan, Ji; Li, Lvzhou

    2018-01-01

    Quantum entanglement is an indispensable resource for many significant quantum information processing tasks. However, in practice, it is difficult to distribute quantum entanglement over a long distance, due to the absorption and noise in quantum channels. A solution to this challenge is a quantum repeater, which can extend the distance of entanglement distribution. In this scheme, the time consumption of classical communication and local operations takes an important place with respect to time efficiency. Motivated by this observation, we consider a basic quantum repeater scheme that focuses on not only the optimal rate of entanglement concentration but also the complexity of local operations and classical communication. First, we consider the case where two different two-qubit pure states are initially distributed in the scenario. We construct a protocol with the optimal entanglement-concentration rate and less consumption of local operations and classical communication. We also find a criterion for the projective measurements to achieve the optimal probability of creating a maximally entangled state between the two ends. Second, we consider the case in which two general pure states are prepared and general measurements are allowed. We get an upper bound on the probability for a successful measurement operation to produce a maximally entangled state without any further local operations.

  18. A Jigsaw Lesson for Operations of Complex Numbers.

    Science.gov (United States)

    Lucas, Carol A.

    2000-01-01

    Explains the cooperative learning technique of jigsaw. Details the use of a jigsaw lesson for explaining complex numbers to intermediate algebra students. Includes copies of the handouts given to the expert groups. (Author/ASK)

  19. Operate to Know: An Operational and Intelligence for the Operational Level of War

    Science.gov (United States)

    2014-06-13

    operationalizing induction, redefining the role of the commander as well as rebalancing the functions of operations and intelligence. Complexity...the Task: A Memoir (New York: Portfolio Hardcover, 2013), 149-154. 68 Mitchell, Complexity: A Guided Tour, 169-185. 47 a mix of both passive...Wehrmacht evolved as a result of a rebalancing and harmonizing of physical-military capabilities, a new combined arms system is emerging where intelligence

  20. The Analysis of Motion Dynamics and Resistance of the Multipurpose Boat Operating in Shallow Water

    OpenAIRE

    Jan Kulczyk; Tomasz Gornicz

    2014-01-01

    Polish market of small boats has been developed very dynamically in recent years. Market competition forces the shipyards to build new more efficient hull forms and to cut the cost of production as well. This is why modern computer simulation programs are used more often by naval architects. Another trend is to design more universal ships that may be used by larger number of diversified customers. This paper presents project proposal of multipurpose boat hull form. The boat was design to f...

  1. A Signal-Interleaving Complex Bandpass Sigma-Delta Converter

    DEFF Research Database (Denmark)

    Wad, Paul Emmanuel

    1997-01-01

    Complex or quadrature Sigma-Delta converters operate on complex signals, i.e. signals consisting of a real and an imaginary component, whereas conventional converters operate only on real signals. The advantage of complex signal processing in the discrete-time domain is that the entire sampling...

  2. Ambient Monitoring for Sinclair and Dyes Inlets, Puget Sound, Washington: Chemical Analyses for 2010 Regional Mussel Watch (AMB02)

    Energy Technology Data Exchange (ETDEWEB)

    Brandenberger, Jill M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kuo, Li-Jung [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suslick, Carolynn R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnston, Robert K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2010-10-20

    The Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS&IMF) and Naval Base Kitsap-Bremerton (Shipyard) located in Bremerton, WA are committed to a culture of continuous process improvement for all aspects of Shipyard operations, including reducing the releases of hazardous materials and waste in discharges from the Shipyard. Under the Project ENVVEST Final Project Agreement, a cooperative project among PSNS&IMF, the Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology), and local stakeholders (US Navy, EPA and Ecology 2002) has been helping to improve the environmental quality of the Sinclair and Dyes Inlet Watershed (ENVVEST 2006). An ambient monitoring program for sediment, water, and indigenous mussels began in 2009 to assess the status and trend of ecological resources, assess the effectiveness of cleanup and pollution control measures, and determine if discharges from all sources are protective of beneficial uses including aquatic life. This document presents the 2010 chemical residue data and stable isotopes of carbon (δ13C) and nitrogen (δ15N) for the regional mussel watch stations located in Sinclair Inlet, Dyes Inlet, Port Orchard Passage, Rich Passage, Agate Passage, Liberty Bay, and Keyport Lagoon. Indigenous bivalves were collected from a small boat and/or from along the shoreline, measured, composited, and analyzed for a suite of trace metals and organic contaminants. The trace metals included silver, arsenic, cadmium, chromium, copper, mercury, nickel, lead, and zinc. The organic contaminants included the list of NOAA Status and Trends 20 polychlorinated biphenyls (PCB) congeners and suite of parent and methylated polycyclic aromatic hydrocarbons (PAHs). These chemical residue data provide the first year of the biota ambient monitoring.

  3. Selection of index complex for the NPP operator activity efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Kolesnik, A I; Chertorizhskij, E A

    1984-01-01

    Preconditions for choice of NPP operator activity efficiency index are determined. Results of the choice are given and a method for determination of generalized and particular parameters by means of which NPP operator activity efficiency can be estimated is considered. An algorithm of diagnosis of reason for unsuccess of operator activity based on assessment of psychological factors of complicacy is suggested.

  4. Pilot Evaluation of the Career Assessment Inventory for Use in Apprentice Placement.

    Science.gov (United States)

    1986-08-01

    241000) (00 S2 ea Heavy Equipment 2850000(0 CD Be a Restaurant CookIPf 195 00000G Q Be an Actor * Actress Operator (bulldozer, 280004e0St ro * 96000 ea... vs . painter). 2. If the CAI is to be used at all, its best use is to counsel shipyard applicants who lack blue collar interests to carefully

  5. Exotic plant species around Jeongeup Research Complex and RFT industrial complex

    International Nuclear Information System (INIS)

    Kim, Jin Kyu; Cha, Min Kyoung; Ryu, Tae Ho; Lee, Yun Jong; Kim, Jin Hong

    2015-01-01

    In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species (Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to ‘monitor species’ designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seems to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex

  6. Exotic plant species around Jeongeup Research Complex and RFT industrial complex

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jin Kyu; Cha, Min Kyoung; Ryu, Tae Ho; Lee, Yun Jong; Kim, Jin Hong [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup(Korea, Republic of)

    2015-08-15

    In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species (Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to ‘monitor species’ designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seems to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex.

  7. Nuclear watch in the Far North

    International Nuclear Information System (INIS)

    Anbarasan, E.

    1998-01-01

    Despite the pressure from Scandinavian and other European countries it is not realistic to expect Russia to abandon its nuclear energy projects, which are badly required for the power starved Northwest region of the country. Russia will probably continue to use and develop nuclear technology because of its huge infrastructure and enormous manpower. In this regard Russia needs help from Western countries to fund a solution to the problem. One of the most important concerns of Norway is related to the naval shipyards in the Kola peninsula and Archangelsk region which include nuclear-powered submarines and about 5000 tons of solid waste generated annually by the Northern Fleet nuclear reactors and at the two shipyards. Norway has taken the lead in co-operating with Russia in working out solutions, but there is no help from the Russian authorities

  8. On commuting operator exponentials, II

    Indian Academy of Sciences (India)

    where N is an unbounded normal operator and M is a bounded normal operator in the. Hilbert space. Keywords. Self-adjoint and normal operator; commuting normal operator exponent- ials; Borel functional calculus. 1. Introduction. Let E be a complex Hilbert space and let B(E) be the algebra of bounded linear operators.

  9. Infirmity and injury complexity are risk factors for surgical-site infection after operative fracture care.

    Science.gov (United States)

    Bachoura, Abdo; Guitton, Thierry G; Smith, R Malcolm; Vrahas, Mark S; Zurakowski, David; Ring, David

    2011-09-01

    Orthopaedic surgical-site infections prolong hospital stays, double rehospitalization rates, and increase healthcare costs. Additionally, patients with orthopaedic surgical-site infections (SSI) have substantially greater physical limitations and reductions in their health-related quality of life. However, the risk factors for SSI after operative fracture care are unclear. We determined the incidence and quantified modifiable and nonmodifiable risk factors for SSIs in patients with orthopaedic trauma undergoing surgery. We retrospectively indentified, from our prospective trauma database and billing records, 1611 patients who underwent 1783 trauma-related procedures between 2006 and 2008. Medical records were reviewed and demographics, surgery-specific data, and whether the patients had an SSI were recorded. We determined which if any variables predicted SSI. Six factors independently predicted SSI: (1) the use of a drain, OR 2.3, 95% CI (1.3-3.8); (2) number of operations OR 3.4, 95% CI (2.0-6.0); (3) diabetes, OR 2.1, 95% CI (1.2-3.8); (4) congestive heart failure (CHF), OR 2.8, 95% CI (1.3-6.5); (5) site of injury tibial shaft/plateau, OR 2.3, 95% CI (1.3-4.2); and (6) site of injury, elbow, OR 2.2, 95% CI (1.1-4.7). The risk factors for SSIs after skeletal trauma are most strongly determined by nonmodifiable factors: patient infirmity (diabetes and heart failure) and injury complexity (site of injury, number of operations, use of a drain). Level II, prognostic study. See the Guideline for Authors for a complete description of levels of evidence.

  10. A Qualitative Method to Estimate HSI Display Complexity

    International Nuclear Information System (INIS)

    Hugo, Jacques; Gertman, David

    2013-01-01

    There is mounting evidence that complex computer system displays in control rooms contribute to cognitive complexity and, thus, to the probability of human error. Research shows that reaction time increases and response accuracy decreases as the number of elements in the display screen increase. However, in terms of supporting the control room operator, approaches focusing on addressing display complexity solely in terms of information density and its location and patterning, will fall short of delivering a properly designed interface. This paper argues that information complexity and semantic complexity are mandatory components when considering display complexity and that the addition of these concepts assists in understanding and resolving differences between designers and the preferences and performance of operators. This paper concludes that a number of simplified methods, when combined, can be used to estimate the impact that a particular display may have on the operator's ability to perform a function accurately and effectively. We present a mixed qualitative and quantitative approach and a method for complexity estimation

  11. Mapping on complex neutrosophic soft expert sets

    Science.gov (United States)

    Al-Quran, Ashraf; Hassan, Nasruddin

    2018-04-01

    We introduce the mapping on complex neutrosophic soft expert sets. Further, we investigated the basic operations and other related properties of complex neutrosophic soft expert image and complex neutrosophic soft expert inverse image of complex neutrosophic soft expert sets.

  12. Disparity in Frontal Lobe Connectivity on a Complex Bimanual Motor Task Aids in Classification of Operator Skill Level.

    Science.gov (United States)

    Andreu-Perez, Javier; Leff, Daniel Richard; Shetty, Kunal; Darzi, Ara; Yang, Guang-Zhong

    2016-06-01

    Objective metrics of technical performance (e.g., dexterity, time, and path length) are insufficient to fully characterize operator skill level, which may be encoded deep within neural function. Unlike reports that capture plasticity across days or weeks, this articles studies long-term plasticity in functional connectivity that occurs over years of professional task practice. Optical neuroimaging data are acquired from professional surgeons of varying experience on a complex bimanual coordination task with the aim of investigating learning-related disparity in frontal lobe functional connectivity that arises as a consequence of motor skill level. The results suggest that prefrontal and premotor seed connectivity is more critical during naïve versus expert performance. Given learning-related differences in connectivity, a least-squares support vector machine with a radial basis function kernel is employed to evaluate skill level using connectivity data. The results demonstrate discrimination of operator skill level with accuracy ≥0.82 and Multiclass Matthew's Correlation Coefficient ≥0.70. Furthermore, these indices are improved when local (i.e., within-region) rather than inter-regional (i.e., between-region) frontal connectivity is considered (p = 0.002). The results suggest that it is possible to classify operator skill level with good accuracy from functional connectivity data, upon which objective assessment and neurofeedback may be used to improve operator performance during technical skill training.

  13. ICDF Complex Remedial Action Work Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. M. Heileson

    2006-12-01

    This Remedial Action Work Plan provides the framework for operation of the Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility Complex (ICDF). This facility includes (a) an engineered landfill that meets the substantial requirements of DOE Order 435.1, Resource Conservation and Recovery Act Subtitle C, Idaho Hazardous Waste Management Act, and Toxic Substances Control Act polychlorinated biphenyl landfill requirements; (b) centralized receiving, inspections, administration, storage/staging, and treatment facilities necessary for CERCLA investigation-derived, remedial, and removal waste at the Idaho National Laboratory (INL) prior to final disposition in the disposal facility or shipment off-Site; and (c) an evaporation pond that has been designated as a corrective action management unit. The ICDF Complex, including a buffer zone, will cover approximately 40 acres, with a landfill disposal capacity of approximately 510,000 yd3. The ICDF Complex is designed and authorized to accept INL CERCLA-generated wastes, and includes the necessary subsystems and support facilities to provide a complete waste management system. This Remedial Action Work Plan presents the operational approach and requirements for the various components that are part of the ICDF Complex. Summaries of the remedial action work elements are presented herein, with supporting information and documents provided as appendixes to this work plan that contain specific detail about the operation of the ICDF Complex. This document presents the planned operational process based upon an evaluation of the remedial action requirements set forth in the Operable Unit 3-13 Final Record of Decision.

  14. NS OTTO HAHN - test report no. 27 for the period from 5-8-1976 to 25-8-1977

    International Nuclear Information System (INIS)

    1977-01-01

    Several voyages to Rio de Janeiro, Montevideo, and Durban are reported on as well as stays in the shipyard. In these reports, the programme of operation is explained, and the technical incidents are described. For the period between August 25th, 1976, and June 17th, 1977, the development of thermal power is given in the form of power histograms. (UA) [de

  15. Nuclear weapons complex

    International Nuclear Information System (INIS)

    Rezendes, V.S.

    1991-03-01

    In this book, GAO characterizes DOE's January 1991 Nuclear Weapons Complex Reconfiguration Study as a starting point for reaching agreement on solutions to many of the complex's safety and environmental problems. Key decisions still need to be made about the size of the complex, where to relocate plutonium operations, what technologies to use for new tritium production, and what to do with excess plutonium. The total cost for reconfiguring and modernizing the complex is still uncertain, and some management issues remain unresolved. Congress faces a difficult task in making test decisions given the conflicting demands for scarce resources in a time of growing budget deficits and war in the Persian Gulf

  16. Operational Reconnaissance: Identifying the Right Problems in a Complex World

    Science.gov (United States)

    2015-05-23

    velocity of human interactions and the diverse demographics among populations as having critical impacts on land operations. Understanding these can have a...Achtung Panzer! Translated by Christopher Duffy. London, England: Arms and Armour Press, 1995. Echevarria II, Antonio J. “American Operational Art

  17. 32 CFR 770.49 - Background.

    Science.gov (United States)

    2010-07-01

    ..., Washington § 770.49 Background. (a) Puget Sound Naval Shipyard is a major naval ship repair facility, with... interruption. Additionally, most of Puget Sound Naval Shipyard is dedicated to heavy industrial activity where...

  18. Operational test report for 2706-T complex liquid transfer system

    International Nuclear Information System (INIS)

    BENZEL, H.R.

    1999-01-01

    This document is the Operational Test Report (OTR). It enters the Record Copy of the W-259 Operational Test Procedure (HNF-3610) into the document retrieval system. Additionally, the OTR summarizes significant issues associated with testing the 2706-T waste liquid transfer and storage system

  19. ABOUT COMPLEX OPERATIONS IN NON-POSITIONAL RESIDUE NUMBER SYSTEM

    Directory of Open Access Journals (Sweden)

    Yu. D. Polissky

    2016-04-01

    Full Text Available Purpose. The purpose of this work is the theoretical substantiation of methods for increased efficiency of execution of difficult, so-called not modular, operations in non-positional residue number system for which it is necessary to know operand digits for all grade levels. Methodology. To achieve the target the numbers are presented in odd module system, while the result of the operation is determined on the basis of establishing the operand parity. The parity is determined by finding the sum modulo for the values of the number positional characteristics for all of its modules. Algorithm of position characteristics includes two types of iteration. The first iteration is to move from this number to a smaller number, in which the remains of one or more modules are equal to zero. This is achieved by subtracting out of all the residues the value of one of them. The second iteration is to move from this number to a smaller number due to exclusion of modules, which residues are zero, by dividing this number by the product of these modules. Iterations are performed until the residues of one, some or all of the modules equal to zero and other modules are excluded. The proposed method is distinguished by its simplicity and allows you to obtain the result of the operation quickly. Findings. There are obtained rather simple solutions of not modular operations for definition of outputs beyond the range of the result of adding or subtracting pairs of numbers, comparing pairs of numbers, determining the number belonging to the specific half of the range, defining parity of numbers presented in non-positional residue number system. Originality. The work offered the new effective approaches to solve the non-modular operations of the non-positional residue number system. It seems appropriate to consider these approaches as research areas to enhance the effectiveness of the modular calculation. Practical value. The above solutions have high performance and can

  20. Complex proofs of real theorems

    CERN Document Server

    Lax, Peter D

    2011-01-01

    Complex Proofs of Real Theorems is an extended meditation on Hadamard's famous dictum, "The shortest and best way between two truths of the real domain often passes through the imaginary one." Directed at an audience acquainted with analysis at the first year graduate level, it aims at illustrating how complex variables can be used to provide quick and efficient proofs of a wide variety of important results in such areas of analysis as approximation theory, operator theory, harmonic analysis, and complex dynamics. Topics discussed include weighted approximation on the line, Müntz's theorem, Toeplitz operators, Beurling's theorem on the invariant spaces of the shift operator, prediction theory, the Riesz convexity theorem, the Paley-Wiener theorem, the Titchmarsh convolution theorem, the Gleason-Kahane-Żelazko theorem, and the Fatou-Julia-Baker theorem. The discussion begins with the world's shortest proof of the fundamental theorem of algebra and concludes with Newman's almost effortless proof of the prime ...

  1. 46 CFR 296.60 - Applications.

    Science.gov (United States)

    2010-10-01

    ... additional vessel maintenance and repair preparation costs, including costs for additional engineering...” for transit to a U.S. shipyard in excess of the transit period to a foreign shipyard on the same trade...

  2. A Qualitative Method to Estimate HSI Display Complexity

    Energy Technology Data Exchange (ETDEWEB)

    Hugo, Jacques; Gertman, David [Idaho National Laboratory, Idaho (United States)

    2013-04-15

    There is mounting evidence that complex computer system displays in control rooms contribute to cognitive complexity and, thus, to the probability of human error. Research shows that reaction time increases and response accuracy decreases as the number of elements in the display screen increase. However, in terms of supporting the control room operator, approaches focusing on addressing display complexity solely in terms of information density and its location and patterning, will fall short of delivering a properly designed interface. This paper argues that information complexity and semantic complexity are mandatory components when considering display complexity and that the addition of these concepts assists in understanding and resolving differences between designers and the preferences and performance of operators. This paper concludes that a number of simplified methods, when combined, can be used to estimate the impact that a particular display may have on the operator's ability to perform a function accurately and effectively. We present a mixed qualitative and quantitative approach and a method for complexity estimation.

  3. Design of operating rules in complex water resources systems using historical records, expert criteria and fuzzy logic

    Science.gov (United States)

    Pulido-Velazquez, Manuel; Macian-Sorribes, Hector; María Benlliure-Moreno, Jose; Fullana-Montoro, Juan

    2015-04-01

    Water resources systems in areas with a strong tradition in water use are complex to manage by the high amount of constraints that overlap in time and space, creating a complicated framework in which past, present and future collide between them. In addition, it is usual to find "hidden constraints" in system operations, which condition operation decisions being unnoticed by anyone but the river managers and users. Being aware of those hidden constraints requires usually years of experience and a degree of involvement in that system's management operations normally beyond the possibilities of technicians. However, their impact in the management decisions is strongly imprinted in the historical data records available. The purpose of this contribution is to present a methodology capable of assessing operating rules in complex water resources systems combining historical records and expert criteria. Both sources are coupled using fuzzy logic. The procedure stages are: 1) organize expert-technicians preliminary meetings to let the first explain how they manage the system; 2) set up a fuzzy rule-based system (FRB) structure according to the way the system is managed; 3) use the historical records available to estimate the inputs' fuzzy numbers, to assign preliminary output values to the FRB rules and to train and validate these rules; 4) organize expert-technician meetings to discuss the rule structure and the input's quantification, returning if required to the second stage; 5) once the FRB structure is accepted, its output values must be refined and completed with the aid of the experts by using meetings, workshops or surveys; 6) combine the FRB with a Decision Support System (DSS) to simulate the effect of those management decisions; 7) compare its results with the ones offered by the historical records and/or simulation or optimization models; and 8) discuss with the stakeholders the model performance returning, if it's required, to the fifth or the second stage

  4. Method of complex scaling

    International Nuclear Information System (INIS)

    Braendas, E.

    1986-01-01

    The method of complex scaling is taken to include bound states, resonances, remaining scattering background and interference. Particular points of the general complex coordinate formulation are presented. It is shown that care must be exercised to avoid paradoxical situations resulting from inadequate definitions of operator domains. A new resonance localization theorem is presented

  5. Examination of Operation Quality for High-frequent Railway Operation

    DEFF Research Database (Denmark)

    Landex, Alex; Kaas, Anders H.

    2009-01-01

    take the first train in their direction. The article examines four different approaches to examine operation quality for high-frequent operation that are based on the experiences of the passengers. These approaches are the service frequency of the operation, travel time extension, a combination......The examination of operation quality for high-frequent operation requires other approaches than the typical evaluation of punctuality (trains on time) and reliability (operated trains). This is because passengers in high-frequent railway systems do not necessarily notice train delays as they just...... of the service frequency and travel time approaches, and passenger delays. The service frequency and travel time approaches are simple measurements with low complexity and complement each other. Therefore, the article recommends combining the service frequency and travel time approaches to get a more accurate...

  6. Modeling of complex gas distribution systems operating under any vacuum conditions: Simulations of the ITER divertor pumping system

    International Nuclear Information System (INIS)

    Vasileiadis, N.; Tatsios, G.; Misdanitis, S.; Valougeorgis, D.

    2016-01-01

    Highlights: • An integrated s/w for modeling complex rarefied gas distribution systems is presented. • Analysis is based on kinetic theory of gases. • Code effectiveness is demonstrated by simulating the ITER divertor pumping system. • The present s/w has the potential to support design work in large vacuum systems. - Abstract: An integrated software tool for modeling and simulation of complex gas distribution systems operating under any vacuum conditions is presented and validated. The algorithm structure includes (a) the input geometrical and operational data of the network, (b) the definition of the fundamental set of network loops and pseudoloops, (c) the formulation and solution of the mass and energy conservation equations, (d) the kinetic data base of the flow rates for channels of any length in the whole range of the Knudsen number, supporting, in an explicit manner, the solution of the conservation equations and (e) the network output data (mainly node pressures and channel flow rates/conductance). The code validity is benchmarked under rough vacuum conditions by comparison with hydrodynamic solutions in the slip regime. Then, its feasibility, effectiveness and potential are demonstrated by simulating the ITER torus vacuum system with the six direct pumps based on the 2012 design of the ITER divertor. Detailed results of the flow patterns and paths in the cassettes, in the gaps between the cassettes and along the divertor ring, as well as of the total throughput for various pumping scenarios and dome pressures are provided. A comparison with previous results available in the literature is included.

  7. Operational Issues: What Science in Available?

    Science.gov (United States)

    Rosekind, Mark R.; Neri, David F.

    1997-01-01

    Flight/duty/rest considerations involve two highly complex factors: the diverse demands of aviation operations and human physiology (especially sleep and circadian rhythms). Several core operational issues related to fatigue have been identified, such as minimum rest requirements, duty length, flight time considerations, crossing multiple time zones, and night flying. Operations also can involve on-call reserve status and callout, delays due to unforeseen circumstances (e.g., weather, mechanical), and on-demand flights. Over 40 years of scientific research is now available to apply to these complex issues of flight/duty/rest requirements. This research involves controlled 'laboratory studies, simulations, and data collected during regular flight operations. When flight/duty/rest requirements are determined they are typically based on a variety of considerations, such as operational demand, safety, economic, etc. Rarely has the available, state-of-the-art science been a consideration along with these other factors when determining flight/duty/rest requirements. While the complexity of the operational demand and human physiology precludes an absolute solution, there is an opportunity to take full advantage of the current scientific data. Incorporating these data in a rational operational manner into flight/duty/rest requirements can improve flight crew performance, alertness, and ultimately, aviation safety.

  8. Managing airlines: the cost of complexity

    Energy Technology Data Exchange (ETDEWEB)

    Trapote-Barreira, C.; Deutschmann, A.; Robuste, F.

    2016-07-01

    This paper is dedicated to the structure of airline networks as a sink of efficient airline operations. Parameters of complexity were derived and mirrored on level of service as well as efficiency parameters. Airlines usually considerers an operational overhead to predict the total flight operation cost. This parameter includes the expected cost for disruptions and delays. When an airline has to mobilize an aircraft in a base for recovering the service or for breaking an emergent dynamic, then it is running extra costs. The cost of managing complexity in the airline industry has a direct impact on profit and loss account. Therefore, this paper presents an integrated approach to evaluate this cost, based on padding and aircrafts dedicated to recover disruptions. Finally, some additional indicators are derived to evaluate reliability improvement as part of complex performance. (Author)

  9. Applied Operations Research: Operator's Assistant

    Science.gov (United States)

    Cole, Stuart K.

    2015-01-01

    NASA operates high value critical equipment (HVCE) that requires trouble shooting, periodic maintenance and continued monitoring by Operations staff. The complexity HVCE and information required to maintain and trouble shoot HVCE to assure continued mission success as paper is voluminous. Training on new HVCE is commensurate with the need for equipment maintenance. LaRC Research Directorate has undertaken a proactive research to support Operations staff by initiation of the development and prototyping an electronic computer based portable maintenance aid (Operator's Assistant). This research established a goal with multiple objectives and a working prototype was developed. The research identified affordable solutions; constraints; demonstrated use of commercial off the shelf software; use of the US Coast Guard maintenance solution; NASA Procedure Representation Language; and the identification of computer system strategies; where these demonstrations and capabilities support the Operator, and maintenance. The results revealed validation against measures of effectiveness and overall proved a substantial training and capability sustainment tool. The research indicated that the OA could be deployed operationally at the LaRC Compressor Station with an expectation of satisfactorily results and to obtain additional lessons learned prior to deployment at other LaRC Research Directorate Facilities. The research revealed projected cost and time savings.

  10. Complex Systems and Dependability

    CERN Document Server

    Zamojski, Wojciech; Sugier, Jaroslaw

    2012-01-01

    Typical contemporary complex system is a multifaceted amalgamation of technical, information, organization, software and human (users, administrators and management) resources. Complexity of such a system comes not only from its involved technical and organizational structure but mainly from complexity of information processes that must be implemented in the operational environment (data processing, monitoring, management, etc.). In such case traditional methods of reliability analysis focused mainly on technical level are usually insufficient in performance evaluation and more innovative meth

  11. Reliability Standards of Complex Engineering Systems

    Science.gov (United States)

    Galperin, E. M.; Zayko, V. A.; Gorshkalev, P. A.

    2017-11-01

    Production and manufacture play an important role in today’s modern society. Industrial production is nowadays characterized by increased and complex communications between its parts. The problem of preventing accidents in a large industrial enterprise becomes especially relevant. In these circumstances, the reliability of enterprise functioning is of particular importance. Potential damage caused by an accident at such enterprise may lead to substantial material losses and, in some cases, can even cause a loss of human lives. That is why industrial enterprise functioning reliability is immensely important. In terms of their reliability, industrial facilities (objects) are divided into simple and complex. Simple objects are characterized by only two conditions: operable and non-operable. A complex object exists in more than two conditions. The main characteristic here is the stability of its operation. This paper develops the reliability indicator combining the set theory methodology and a state space method. Both are widely used to analyze dynamically developing probability processes. The research also introduces a set of reliability indicators for complex technical systems.

  12. Nuclear weapons complex

    International Nuclear Information System (INIS)

    Rezendes, V.S.

    1992-04-01

    In addition to long-standing safety and environmental problems plaguing the nuclear weapons complex, this paper reports that the Department of Energy (DOE) faces a major new challenge-how to reconfigure the weapons complex to meet the nation's defense needs in the 21st century. Key decisions still need to be made about the size of the complex; where, if necessary, to relocate various operations; what technologies to use for new tritium production; and what to do with excess weapons-grade material. The choices confronting DOE and Congress are difficult given the conflicting demands for limited resources

  13. Automated complex for research of electric drives control

    Science.gov (United States)

    Avlasko, P. V.; Antonenko, D. A.

    2018-05-01

    In the article, the automated complex intended for research of various control modes of electric motors including the inductor motor of double-way feed is described. As a basis of the created complex, the National Instruments platform is chosen. The operating controller built in a platform is delivered with an operating system of real-time for creation of systems of measurement and management. The software developed in the environment of LabVIEW consists of several connected modules which are in different elements of a complex. Besides the software for automated management by experimental installation, the program complex is developed for modelling of processes in the electric drive. As a result there is an opportunity to compare simulated and received experimentally transitional characteristics of the electric drive in various operating modes.

  14. The control of operational risk in nuclear power plant operations - Some cross-cultural perspectives

    International Nuclear Information System (INIS)

    Suchard, A.; Rochlin, G.

    1992-01-01

    The operation of nuclear power plants requires the management of a complex technology under exacting performance and safety criteria. Organizations operating nuclear power plants are faced with the challenge of simultaneously meeting technical, organizational, and social demands, striving toward perfection in a situation where learning by trial and error can be too costly. In this process, they interact with regulatory bodies who seek to help minimize operational risk by imposing and upholding safety standards. The character of this interaction differs in various countries, as does the larger cultural setting. The study generally pursued the question of how organizations operating complex and demanding technologies adapt to such requirements and circumstances, and how they can succeed in delivering nearly error-free performance. One aspect of this study includes the comparison of organizational and cultural environments for nuclear power plant operations in the US, France, Germany, Sweden, and Switzerland. The research involved in-depth, continuous observations on location and interviews with plant personnel, especially control operators, at one plant in each country

  15. Military Intelligence Fusion for Complex Operations: A New Paradigm

    Science.gov (United States)

    2012-01-01

    government officials, has often been central to eventual victory, and this concept of behavior (agnostic redemption ) seems to be a necessary undergirding to...convey the true complexity of the environment in a massive and ultimately unreadable SoSA “spa- ghetti chart,” commanders and analysts should treat

  16. Can We Measure Operating Team's Situation Awareness with Verbal Protocols?

    International Nuclear Information System (INIS)

    Lee, Seung Woo; Kim, Ar Ryum; Kang, Hyun Gook; Seong, Poong Hyun; Park, Jin Kyun

    2011-01-01

    Today's systems are complex, focused on not just physical tasks, but on elaborate perceptual and cognitive tasks as well. Hence, humans in many complex and dynamic systems are required to act as effective and timely decision makers. Situation Awareness (SA), which is used within human factor research to explain to what extent operators of safety critical and complex real systems know what is going on the system and the environment, is considered a prerequisite factor for effective decision making and performance. Thus, the need for operators to maintain SA in complex and dynamic environments is frequently cited as a key to effective and efficient performance. In terms of understanding SA, much effort has been devoted to the development of a measurement method of SA. Thus far, however, various studies have been limited to addressing the SA of individual operators. However, many complex systems are operated by teams. It is typical of complex systems that they require more than one operator. The purpose of this study is to develop team SA measurement method using verbal protocol data

  17. Schwarz Shipyards

    DEFF Research Database (Denmark)

    Rohrbeck, René; Bøe-Lillegraven, Siri; Scheel, Christian

    2013-01-01

    , industry life-cycle, Porter’s generic strategies, SWOT analysis, strategy formation and business model analysis. The case builds on an in-depth case study conducted in 2011/2012. The case has been anonymized. More specifically the case describes the triumphs and challenges of a medium-sized European......This case is designed to discuss strategy formation and strategic renewal in small and medium-sized enterprises that are challenged by external disruptive change. The case can be used to teach: external analysis, BCG-matrix, internal analysis (resources and capabilities), Porter’s-5-Forces...

  18. Several complex variables

    International Nuclear Information System (INIS)

    Field, M.J.

    1976-01-01

    Topics discussed include the elementary of holomorphic functions of several complex variables; the Weierstrass preparation theorem; meromorphic functions, holomorphic line bundles and divisors; elliptic operators on compact manifolds; hermitian connections; the Hodge decomposition theorem. ( author)

  19. What is complex in the complex world? Niklas Luhmann and the theory of social systems

    Directory of Open Access Journals (Sweden)

    Clarissa Eckert Baeta Neves

    Full Text Available This paper discusses Niklas Luhmann's understanding of complexity, its function in the theory and the different ways of its use. It starts with the paradigmatic change that occurred in the field of general Science, with the rupture of the Newtonian model. In the 20th century, the paradigm of order, symmetry, regularity, regulation of the intellect to things, collapses.Based on new formulations of Physics, Chemistry, etc., a new universe is built on bases radically opposed to those of modern Science.Chaos, the procedural irreversibility, indeterminism, the observer and the complexity are rehabilitated.This new conceptual context served as substratum to Niklas Luhmann's theoretical reflection.With his Theory of Social Systems, he proposes the reduction of the world's complexity.Social systems have the function of reducing complexity because of their difference in relation to the environment.On the other hand, the reduction of complexity also creates its own complexity. Luhmann defines complexity as the moment when it is not possible anymore for each element to relate at any moment with all the others. Complexity forces the selection, what means contingency and risk. Luhmann expands the concept of complexity when he introduces the figure of the observer and the distinction of complexity as a unit of a multiplicity. He also deals with the limit of relations in connection, the time factor, the self-reference of operations and the representation of complexity in the form of sense. To conclude, the paper discusses the complexity in the system of science, the way it reduces internal and external complexity, in accordance in its own operative basis.

  20. Operation problems as viewed by EDF

    International Nuclear Information System (INIS)

    Cheimanoff, Andre; Gaborit, Jean; Thom, Roger

    1983-01-01

    The installation of a plant such as Eurodif, whose power will reach, when fully operational, a maximum of 3,200 MW, and of a nuclear power plant of 4x900 MW, such as the one located in the Tricastin area, has considerable effects on the structure and operation of the EDF's network, both at the national and regional levels. The paper presents the situation regarding the Tricastin-Eurodif complex in the context of the EDF's network, the main operation problems that are encountered and the organization that had to be created to tackle these problems. Finally, it affords the opportunity to give an appreciation of the situation about the operation of the complex in 1982 [fr

  1. Estimating the operator's performance time of emergency procedural tasks based on a task complexity measure

    International Nuclear Information System (INIS)

    Jung, Won Dae; Park, Jink Yun

    2012-01-01

    It is important to understand the amount of time required to execute an emergency procedural task in a high-stress situation for managing human performance under emergencies in a nuclear power plant. However, the time to execute an emergency procedural task is highly dependent upon expert judgment due to the lack of actual data. This paper proposes an analytical method to estimate the operator's performance time (OPT) of a procedural task, which is based on a measure of the task complexity (TACOM). The proposed method for estimating an OPT is an equation that uses the TACOM as a variable, and the OPT of a procedural task can be calculated if its relevant TACOM score is available. The validity of the proposed equation is demonstrated by comparing the estimated OPTs with the observed OPTs for emergency procedural tasks in a steam generator tube rupture scenario.

  2. The AECL operator companion

    International Nuclear Information System (INIS)

    Lupton, L.R.; Anderson, L.L.; Basso, R.A.J.

    1989-11-01

    As CANDU plants become more complex, and are operated under tighter constraints and for longer periods between outages, plant operations staff will have to absorb more information to correctly and rapidly respond to upsets. A development program is underway at AECL to use expert systems and interactive media tools to assist operations staff of existing and future CANDU plants. The complete system for plant information access and display, on-line advice and diagnosis, and interactive operating procedures is called the Operator Companion. A prototype, consisting of operator consoles, expert systems and simulation modules in a distributed architecture, is currently being developed to demonstrate the concepts of the Operator Companion

  3. Operator theory

    CERN Document Server

    2015-01-01

    A one-sentence definition of operator theory could be: The study of (linear) continuous operations between topological vector spaces, these being in general (but not exclusively) Fréchet, Banach, or Hilbert spaces (or their duals). Operator theory is thus a very wide field, with numerous facets, both applied and theoretical. There are deep connections with complex analysis, functional analysis, mathematical physics, and electrical engineering, to name a few. Fascinating new applications and directions regularly appear, such as operator spaces, free probability, and applications to Clifford analysis. In our choice of the sections, we tried to reflect this diversity. This is a dynamic ongoing project, and more sections are planned, to complete the picture. We hope you enjoy the reading, and profit from this endeavor.

  4. Real-Time and Real-Fast Performance of General-Purpose and Real-Time Operating Systems in Multithreaded Physical Simulation of Complex Mechanical Systems

    Directory of Open Access Journals (Sweden)

    Carlos Garre

    2014-01-01

    Full Text Available Physical simulation is a valuable tool in many fields of engineering for the tasks of design, prototyping, and testing. General-purpose operating systems (GPOS are designed for real-fast tasks, such as offline simulation of complex physical models that should finish as soon as possible. Interfacing hardware at a given rate (as in a hardware-in-the-loop test requires instead maximizing time determinism, for which real-time operating systems (RTOS are designed. In this paper, real-fast and real-time performance of RTOS and GPOS are compared when simulating models of high complexity with large time steps. This type of applications is usually present in the automotive industry and requires a good trade-off between real-fast and real-time performance. The performance of an RTOS and a GPOS is compared by running a tire model scalable on the number of degrees-of-freedom and parallel threads. The benchmark shows that the GPOS present better performance in real-fast runs but worse in real-time due to nonexplicit task switches and to the latency associated with interprocess communication (IPC and task switch.

  5. Trace formulas for parameter-dependent pseudodifferential operators

    DEFF Research Database (Denmark)

    Grubb, Gerd

    2002-01-01

    Trace expansions for operator families such as the resolvent, the heat operator and the complex powers are established for elliptic problems containing pseudodifferential elements. We consider operators on closed manifolds, as well as operators on compact manifolds with boundary, where suitable...

  6. Solid waste operations complex engineering verification program plan

    International Nuclear Information System (INIS)

    Bergeson, C.L.

    1994-01-01

    This plan supersedes, but does not replace, the previous Waste Receiving and Processing/Solid Waste Engineering Development Program Plan. In doing this, it does not repeat the basic definitions of the various types or classes of development activities nor provide the rigorous written description of each facility and assign the equipment to development classes. The methodology described in the previous document is still valid and was used to determine the types of verification efforts required. This Engineering Verification Program Plan will be updated on a yearly basis. This EVPP provides programmatic definition of all engineering verification activities for the following SWOC projects: (1) Project W-026 - Waste Receiving and Processing Facility Module 1; (2) Project W-100 - Waste Receiving and Processing Facility Module 2A; (3) Project W-112 - Phase V Storage Facility; and (4) Project W-113 - Solid Waste Retrieval. No engineering verification activities are defined for Project W-112 as no verification work was identified. The Acceptance Test Procedures/Operational Test Procedures will be part of each project's Title III operation test efforts. The ATPs/OTPs are not covered by this EVPP

  7. Organotins and new antifouling biocides in water and sediments from three Korean Special Management Sea Areas following ten years of tributyltin regulation: Contamination profiles and risk assessment.

    Science.gov (United States)

    Lam, Nguyen Hoang; Jeong, Hui-Ho; Kang, Su-Dong; Kim, Dae-Jin; Ju, Mi-Jo; Horiguchi, Toshihiro; Cho, Hyeon-Seo

    2017-08-15

    A simultaneous monitoring study on organotins (butyltins and phenyltins) and most frequently used alternative antifouling biocides (Irgarol 1051, Diuron, Sea-Nine 211 and M1) in water and sediments (n=44) collected from three Special Management Sea Areas operated by Korean government. The lower concentration of butyltins (BTs) than that of new antifouling biocides (NEW) was found in water but the significant greater concentration of BTs than that of NEW was still found in sediments. The tributyltin (TBT) levels in water exceeded the chronic criterion to protect seawater aquatic life at several sites. Even ten years after the ban of the use of TBT-based antifouling paint, the concentrations of TBT, Diuron and Irgarol 1051 in sediments from shipyards exceeded global sediment quality guidelines and potentially poses adverse risks on marine organisms and extremely high concentration of TBT up to 2304ng/g was found for a sediment collected at a shipyard. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Operator Semigroups meet Complex Analysis, Harmonic Analysis and Mathematical Physics

    CERN Document Server

    Chill, Ralph; Tomilov, Yuri

    2015-01-01

    This proceedings volume originates from a conference held in Herrnhut in June 2013. It provides unique insights into the power of abstract methods and techniques in dealing successfully with numerous applications stemming from classical analysis and mathematical physics. The book features diverse topics in the area of operator semigroups, including partial differential equations, martingale and Hilbert transforms, Banach and von Neumann algebras, Schrödinger operators, maximal regularity and Fourier multipliers, interpolation, operator-theoretical problems (concerning generation, perturbation and dilation, for example), and various qualitative and quantitative Tauberian theorems with a focus on transfinite induction and magics of Cantor. The last fifteen years have seen the dawn of a new era for semigroup theory with the emphasis on applications of abstract results, often unexpected and far removed from traditional ones. The aim of the conference was to bring together prominent experts in the field of modern...

  9. Complex energy system management using optimization techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bridgeman, Stuart; Hurdowar-Castro, Diana; Allen, Rick; Olason, Tryggvi; Welt, Francois

    2010-09-15

    Modern energy systems are often very complex with respect to the mix of generation sources, energy storage, transmission, and avenues to market. Historically, power was provided by government organizations to load centers, and pricing was provided in a regulatory manner. In recent years, this process has been displaced by the independent system operator (ISO). This complexity makes the operation of these systems very difficult, since the components of the system are interdependent. Consequently, computer-based large-scale simulation and optimization methods like Decision Support Systems are now being used. This paper discusses the application of a DSS to operations and planning systems.

  10. Cyclomatic Complexity: theme and variations

    Directory of Open Access Journals (Sweden)

    Brian Henderson-Sellers

    1993-11-01

    Full Text Available Focussing on the "McCabe family" of measures for the decision/logic structure of a program, leads to an evaluation of extensions to modularization, nesting and, potentially, to object-oriented program structures. A comparison of rated, operating and essential complexities of programs suggests two new metrics: "inessential complexity" as a measure of unstructuredness and "product complexity" as a potential objective measure of structural complexity. Finally, nesting and abstraction levels are considered, especially as to how metrics from the "McCabe family" might be applied in an object-oriented systems development environment.

  11. Operations management system

    Science.gov (United States)

    Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

    1990-01-01

    The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

  12. Learning from Failures in Operations

    DEFF Research Database (Denmark)

    Koch, Christian

    2005-01-01

    parallelism and fragmentation due to their predominantly quantitative complexity. It is suggested that a number of critical junctions occur in these processes and that obtaining quality and avoiding failures quite often requires a series of competent and situational operation management actions. An empirical...... product. The analysis showed that, among others, design review, project review, commencing and finalizing operations turned out to be critical junctions in the control of failures. Practical implications and improvements are discussed. The focus on critical junctions, points to supply chain management......This paper discusses failures and quality in operations in design and production of buildings. The importance of human action, interpretations and interactions in tackling complexity, fragmentation and disturbances in the building industry is underlined. Building processes encompass requisite...

  13. AGOR 28: SIO Shipyard Representative Bi-Weekly Progress Report

    Science.gov (United States)

    2016-06-18

    Sally Ride. • Two full 20-foot IOL shipping containers scheduled for delivery DCI on Monday. • Spares Load out scheduled for next week. 4. Operator...the silty water. 2 • Anchor Windlass – Design using “ulster” chain guide is progressing. Yesterday’s development regarding foreign chain...J-1 at sustained speed. See Airborne Noise Survey Report (DI-032-006) for more information (Delete after RFW approved) 1137 HVAC - There were no

  14. Downfall Delayed. Danish Shipbuilding and Industrial Dislocation

    DEFF Research Database (Denmark)

    Poulsen, René Taudal; Sornn-Friese, Henrik

    2011-01-01

    This article analyses the decline of the Danish shipbuilding industry. European shipyards dominated global shipbuilding markets in the first half of the twentieth century, but began to be challenged by the Japanese from the 1950s and by the South Koreans from the late 1970s. More recently, China...... has taken over large slices of the global shipbuilding market and currently is the world's largest shipbuilding nation. As a result of this new competition, European shipyards closed en masse and Europe experienced a process of maritime deindustrialisation in the 1970s and 1980s. Danish shipyards were...

  15. Operation Context

    DEFF Research Database (Denmark)

    Stüben, Henning; Tietjen, Anne

    2006-01-01

    Abstract: This paper seeks to challenge the notion of context from an operational perspective. Can we grasp the forces that shape the complex conditions for an architectural or urban design within the notion of context? By shifting the gaze towards the agency of architecture, contextual analysis...

  16. Towards strategy formulation in a complex environment

    Directory of Open Access Journals (Sweden)

    René Pellissier

    2014-01-01

    Full Text Available The management sciences offer mainly linear solutions to an environment that is becoming increasingly complex. This is aggravated by the need for innovation outcomes. Formulating and implementing strategy is therefore far more complicated. Since developing economies face far less stable environments, businesses operating in these domains are more accustomed (even adept to deal with complexity. This article compares the deployment of complexity in strategy to achieve innovation in either a developing or a developed economy setting. From interviews conducted with selected CEOs from both economies, it was found that the businesses in the developing economies include complexity factors in their strategies whereas those in developed economies focus on operational excellence and not on complexity. Therefore, at this point, businesses in developed economies may want to explore the strategies adopted by those in developing economies to accommodate diversity and the dynamic environment that require innovations.

  17. Describing joint air defence within operations other than war context as a complex system

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2009-10-01

    Full Text Available . This paper will firstly investigate the theory of complexity and identify the main characteristics. This will be applied to Systems Engineering and modelling techniques, to propose a method of implementation in the real world. The application... of complexity in warfare is discussed to form a foundation for the discussion of JAD. Finally, the sources of complexity in JAD are identified and an approach to address these proposed. 2 Complex Systems 2.1 Definition of Complex Systems The theory...

  18. Urban Short Range Interaction: An LVC Solution for Urban Operation Training

    NARCIS (Netherlands)

    Muller, T; Krijnen, R.; Visschedijk, G.C.

    2012-01-01

    Urban Operations are an increasingly important part of military operations, both nationally and during expeditions. The complexity of the urban environment makes these operations difficult, and a key aspect of this complexity is the presence of local population. The individual soldier needs to

  19. AGOR 28: SIO Shipyard Representative Bi-Weekly Progress Report

    Science.gov (United States)

    2015-07-30

    sides of the lower engine room still have sections of bare acoustic tile that require thermal insulation and Quad-Zero • Main Deck Noise Levels, Sally...for Sally Ride. ii. Working on NS5 Hierarchy 4. Operator Concerns: • Acoustic Tiles & MLV – No additional tiles have been removed this...reporting period. DCI has no plans to remove any more per USCG. No indication as to what sound treatment will be placed in the engine room bilge or on

  20. Nuclear weapons complex

    International Nuclear Information System (INIS)

    Peach, J.D.

    1991-02-01

    In this paper, GAO provides its views on DOE's January 1991 Nuclear Weapons Complex Reconfiguration Study. GAO believes that DOE's new reconfiguration study provides a starting point for reaching agreement on solutions to many of the complex's problems. Key decisions still need to be made about the size of the complex, where to relocate plutonium operations, what technologies should be used for new tritium production, and what to do with excess plutonium. The total cost for reconfiguring and modernizing is still uncertain and some management issues remain unresolved. Congress faces a difficult task in making these decisions given the conflicting demands for scare resources in a time of growing budget deficits and war in the Persian Gulf

  1. Radiation safety aspects at Indus accelerator complex

    International Nuclear Information System (INIS)

    Marathe, R.G.

    2011-01-01

    Indus Accelerator Complex at Raja Ramanna Center for Advanced Technology houses two synchrotron radiation sources Indus-1 and Indus-2 that are being operated round-the-clock to cater to the needs of the research community. Indus-1 is a 450 MeV electron storage ring and Indus-2 is presently being operated with electrons stored at 2 GeV. Bremsstrahlung radiation and photo-neutrons form the major radiation environment in Indus Accelerator Complex. They are produced due to loss of electron-beam occurring at different stages of operation of various accelerators located in the complex. The synchrotron radiation (SR) also contributes as a potential hazard. In order to ensure safety of synchrotron radiation users and operation and maintenance staff working in the complex from this radiation, an elaborate radiation safety system is in place. The system comprises a Personnel Protection System (PPS) and a Radiation Monitoring System (RMS). The PPS includes zoning, radiation shielding, door interlocks, a search and scram system and machine operation trip-interlocks. The RMS consists of area radiation monitors and beam loss monitors, whose data is available online in the Indus control room. Historical data of radiation levels is also available for data analysis. Synchrotron radiation beamlines at Indus-2 are handled in a special manner owing to the possibility of exposure to synchrotron radiation. Shielding hutches with SR monitors are installed at each beamline of Indus-2. Health Physics Unit also carries out regular radiological surveillance for photons and neutrons during various modes of operation and data is logged shift wise. The operation staff is appropriately trained and qualified as per the recommendations of Atomic Energy Regulatory Board (AERB). Safety training is also imparted to the beamline users. Safe operation procedures and operation checklists are being followed strictly. A radiation instrument calibration facility is also being set-up at RRCAT. The radiation

  2. SIMULATORS FOR TRAINING OF ROV OPERATOR

    Directory of Open Access Journals (Sweden)

    B. I. Shakhtarin

    2014-01-01

    Full Text Available In the article issues of the organization of imitating modeling complexes for training operators of Remotely Operated Underwater Vehicle are considered. It is reported about practical development of sea exercise simulation in Bauman MSTU.

  3. Environmental monitoring program for Itataia industrial complex before operational phase

    International Nuclear Information System (INIS)

    Condessa, M.L.M.B.

    1982-01-01

    This environmental monitoring program aims to characterize the environment in adjacent area of Itataia Industrial Complex. The places and frequencies of samples and measurements, as well as analysis and parameters to be measured in each type of samples are presented. (C.M.) [pt

  4. Recent Results in High Power CO2-Laser Cutting for Shipbuilding Industry

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Juhl, Thomas Winther; Nielsen, Jakob Skov

    2003-01-01

    In 1997 a high power laser cutting and welding test facility was established at the Danish shipyard Odense Steel Shipyard (OSS). Research and development projects were initiated in order to establish the basis for applying the full power of the laser for laser-cutting, by developing mirror based...

  5. Reliability of large and complex systems

    CERN Document Server

    Kolowrocki, Krzysztof

    2014-01-01

    Reliability of Large and Complex Systems, previously titled Reliability of Large Systems, is an innovative guide to the current state and reliability of large and complex systems. In addition to revised and updated content on the complexity and safety of large and complex mechanisms, this new edition looks at the reliability of nanosystems, a key research topic in nanotechnology science. The author discusses the importance of safety investigation of critical infrastructures that have aged or have been exposed to varying operational conditions. This reference provides an asympt

  6. Integrated formal operations plan

    Energy Technology Data Exchange (ETDEWEB)

    Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

    1994-01-05

    The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

  7. Status of the HIRFL–CSR complex

    International Nuclear Information System (INIS)

    Yuan, Y.J.; Yang, J.C.; Xia, J.W.; Yuan, P.; Qiao, W.M.; Gao, D.Q.; Xiao, G.Q.; Zhao, H.W.; Xu, H.S.; Song, M.T.; Yang, X.D.; Cai, X.H.; Ma, L.Z.; Yang, X.T.; Man, K.T.; He, Y.; Zhou, Z.Z.; Zhang, J.H.; Xu, Z.; Liu, Y.

    2013-01-01

    Highlights: • HIRFL is in a very positive state and can provide all ion species with maximum energy to 1 GeV/u (A/q = 2). • Present status of HIRFL complex is given as well as the new progress on operation and improvement. • With emphasize on HIRFL–CSR project, main features realized during the commissioning and operation are described in detail. • The progress on physics experiments and hadron cancer therapy are also presented. -- Abstract: The HIRFL–CSR, as an upgrade of the HIRFL, has been put into operation since 2008. Together with a series of improvements of injector cyclotrons, the HIRFL is in a very good state and can provide all ion species from proton to uranium with energy variable from ion source energy to 1 GeV/u (A/q = 2). Present status of the HIRFL–CSR complex is given. Main features realized during the commissioning and operation are described in detail. The progress on physics experiments and cancer therapy are also presented

  8. A study of complex scaling transformation using the Wigner representation of wavefunctions.

    Science.gov (United States)

    Kaprálová-Ždánská, Petra Ruth

    2011-05-28

    The complex scaling operator exp(-θ ̂x̂p/ℏ), being a foundation of the complex scaling method for resonances, is studied in the Wigner phase-space representation. It is shown that the complex scaling operator behaves similarly to the squeezing operator, rotating and amplifying Wigner quasi-probability distributions of the respective wavefunctions. It is disclosed that the distorting effect of the complex scaling transformation is correlated with increased numerical errors of computed resonance energies and widths. The behavior of the numerical error is demonstrated for a computation of CO(2+) vibronic resonances. © 2011 American Institute of Physics

  9. Typical Complexity Numbers

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Typical Complexity Numbers. Say. 1000 tones,; 100 Users,; Transmission every 10 msec. Full Crosstalk cancellation would require. Full cancellation requires a matrix multiplication of order 100*100 for all the tones. 1000*100*100*100 operations every second for the ...

  10. 3D GIS spatial operation based on extended Euler operators

    Science.gov (United States)

    Xu, Hongbo; Lu, Guonian; Sheng, Yehua; Zhou, Liangchen; Guo, Fei; Shang, Zuoyan; Wang, Jing

    2008-10-01

    The implementation of 3 dimensions spatial operations, based on certain data structure, has a lack of universality and is not able to treat with non-manifold cases, at present. ISO/DIS 19107 standard just presents the definition of Boolean operators and set operators for topological relationship query, and OGC GeoXACML gives formal definitions for several set functions without implementation detail. Aiming at these problems, based mathematical foundation on cell complex theory, supported by non-manifold data structure and using relevant research in the field of non-manifold geometry modeling for reference, firstly, this paper according to non-manifold Euler-Poincaré formula constructs 6 extended Euler operators and inverse operators to carry out creating, updating and deleting 3D spatial elements, as well as several pairs of supplementary Euler operators to convenient for implementing advanced functions. Secondly, we change topological element operation sequence of Boolean operation and set operation as well as set functions defined in GeoXACML into combination of extended Euler operators, which separates the upper functions and lower data structure. Lastly, we develop underground 3D GIS prototype system, in which practicability and credibility of extended Euler operators faced to 3D GIS presented by this paper are validated.

  11. BRST-operator for quantum Lie algebra and differential calculus on quantum groups

    International Nuclear Information System (INIS)

    Isaev, A.P.; Ogievetskij, O.V.

    2001-01-01

    For A Hopf algebra one determined structure of differential complex in two dual external Hopf algebras: A external expansion and in A* dual algebra external expansion. The Heisenberg double of these two Hopf algebras governs the differential algebra for the Cartan differential calculus on A algebra. The forst differential complex is the analog of the de Rame complex. The second complex coincide with the standard complex. Differential is realized as (anti)commutator with Q BRST-operator. Paper contains recursion relation that determines unequivocally Q operator. For U q (gl(N)) Lie quantum algebra one constructed BRST- and anti-BRST-operators and formulated the theorem of the Hodge expansion [ru

  12. Automated validation of a computer operating system

    Science.gov (United States)

    Dervage, M. M.; Milberg, B. A.

    1970-01-01

    Programs apply selected input/output loads to complex computer operating system and measure performance of that system under such loads. Technique lends itself to checkout of computer software designed to monitor automated complex industrial systems.

  13. The Complex Role of Store Operated Calcium Entry Pathways and Related Proteins in the Function of Cardiac, Skeletal and Vascular Smooth Muscle Cells

    Directory of Open Access Journals (Sweden)

    Javier Avila-Medina

    2018-03-01

    Full Text Available Cardiac, skeletal, and smooth muscle cells shared the common feature of contraction in response to different stimuli. Agonist-induced muscle's contraction is triggered by a cytosolic free Ca2+ concentration increase due to a rapid Ca2+ release from intracellular stores and a transmembrane Ca2+ influx, mainly through L-type Ca2+ channels. Compelling evidences have demonstrated that Ca2+ might also enter through other cationic channels such as Store-Operated Ca2+ Channels (SOCCs, involved in several physiological functions and pathological conditions. The opening of SOCCs is regulated by the filling state of the intracellular Ca2+ store, the sarcoplasmic reticulum, which communicates to the plasma membrane channels through the Stromal Interaction Molecule 1/2 (STIM1/2 protein. In muscle cells, SOCCs can be mainly non-selective cation channels formed by Orai1 and other members of the Transient Receptor Potential-Canonical (TRPC channels family, as well as highly selective Ca2+ Release-Activated Ca2+ (CRAC channels, formed exclusively by subunits of Orai proteins likely organized in macromolecular complexes. This review summarizes the current knowledge of the complex role of Store Operated Calcium Entry (SOCE pathways and related proteins in the function of cardiac, skeletal, and vascular smooth muscle cells.

  14. User Control Interface for W7-X Plasma Operation

    International Nuclear Information System (INIS)

    Spring, A.; Laqua, H.; Schacht, J.

    2006-01-01

    The WENDELSTEIN 7-X fusion experiment will be a highly complex device operated by a likewise complex control system. The fundamental configuration of the W7-X control system follows two major design principles: It reflects the strict hierarchy of the machine set-up with a set of subordinated components, which in turn can be run autonomously during commissioning and testing. Secondly, it links the basic machine operation (mainly given by the infrastructure status and the components readiness) and the physics program execution (i.e. plasma operation) on each hierarchy level and on different time scales. The complexity of the control system implies great demands on appropriate user interfaces: specialized tools for specific control tasks allowing a dedicated view on the subject to be controlled, hiding complexity wherever possible and reasonable, providing similar operation methods on each hierarchy level and both manual interaction possibilities and a high degree of intelligent automation. The contribution will describe the operation interface for experiment control including the necessary links to the machine operation. The users of ' Xcontrol ' will be both the W7-X session leaders during plasma discharge experiments and the components' or diagnostics' operators during autonomous mode or even laboratory experiments. The main ' Xcontrol ' features, such as program composition and validation, manual and automatic control instruments, resource survey, and process monitoring, will be presented. The implementation principles and the underlying communication will be discussed. (author)

  15. Water-chemical regime of a fast reactor ower complex

    International Nuclear Information System (INIS)

    Musikhin, R.N.; Piskunov, E.M.; Samarkin, A.A.; Yurchenko, D.S.

    1983-01-01

    Some peculiarities of water-chemical regime of a power compleX in Shevchenko are considered. The complex comprises a desalination unit, a gas-masout heating-and-power plant and the BN-350 reactor. The compleX is used for the production of electric and thermal energy and fresh water. The power complex peculiarity is the utilization of disalinated seawater in a technological cycle along with highly mineralized seawater with a total salt content of 13.5 g/l (for cooling) in heat exchanges. A regime of ammoniacal correction of feed water was used as a basic water-chemical regime in the initial period of the BN-350 steam generator operation. Deposits composed mainly of iron oxide slime were observed on steam generator surfaces during the operation under these conditions. A conclusion is made that the regime with chelating agent providing steam generator safe operation without chemical cleaning is the most expedient one

  16. Operation Statistics of the CERN Accelerators Complex for 2003

    CERN Document Server

    CERN. Geneva; Baird, S A; Rey, A; Steerenberg, R; CERN. Geneva. AB Department

    2004-01-01

    This report gives an overview of the performance of the different Accelerators (Linacs, PS Booster, PS, AD and SPS) of the CERN Accelerator Complex for 2003. It includes scheduled activities, beam availabilities, beam intensities and an analysis of faults and breakdowns by system and by beam. MORE INFORATION by using the OP Statistics Tool: http://eLogbook.web.cern.ch/eLogbook/statistics.php and on the SPS HomePage: http://ab-div-op-sps.web.cern.ch/ab-div-op-sps/SPSss.html

  17. Code Samples Used for Complexity and Control

    Science.gov (United States)

    Ivancevic, Vladimir G.; Reid, Darryn J.

    2015-11-01

    The following sections are included: * MathematicaⓇ Code * Generic Chaotic Simulator * Vector Differential Operators * NLS Explorer * 2C++ Code * C++ Lambda Functions for Real Calculus * Accelerometer Data Processor * Simple Predictor-Corrector Integrator * Solving the BVP with the Shooting Method * Linear Hyperbolic PDE Solver * Linear Elliptic PDE Solver * Method of Lines for a Set of the NLS Equations * C# Code * Iterative Equation Solver * Simulated Annealing: A Function Minimum * Simple Nonlinear Dynamics * Nonlinear Pendulum Simulator * Lagrangian Dynamics Simulator * Complex-Valued Crowd Attractor Dynamics * Freeform Fortran Code * Lorenz Attractor Simulator * Complex Lorenz Attractor * Simple SGE Soliton * Complex Signal Presentation * Gaussian Wave Packet * Hermitian Matrices * Euclidean L2-Norm * Vector/Matrix Operations * Plain C-Code: Levenberg-Marquardt Optimizer * Free Basic Code: 2D Crowd Dynamics with 3000 Agents

  18. BRAND program complex

    International Nuclear Information System (INIS)

    Androsenko, A.A.; Androsenko, P.A.

    1983-01-01

    A description is given of the structure, input procedure and recording rules of initial data for the BRAND programme complex intended for the Monte Carlo simulation of neutron physics experiments. The BRAND complex ideology is based on non-analogous simulation of the neutron and photon transport process (statistic weights are used, absorption and escape of particles from the considered region is taken into account, shifted readouts from a coordinate part of transition nucleus density are applied, local estimations, etc. are used). The preparation of initial data for three sections is described in detail: general information for Monte Carlo calculation, source definition and data for describing the geometry of the system. The complex is to be processed with the BESM-6 computer, the basic programming lan-- guage is FORTRAN, volume - more than 8000 operators

  19. Spectral simplicity of apparent complexity. II. Exact complexities and complexity spectra

    Science.gov (United States)

    Riechers, Paul M.; Crutchfield, James P.

    2018-03-01

    The meromorphic functional calculus developed in Part I overcomes the nondiagonalizability of linear operators that arises often in the temporal evolution of complex systems and is generic to the metadynamics of predicting their behavior. Using the resulting spectral decomposition, we derive closed-form expressions for correlation functions, finite-length Shannon entropy-rate approximates, asymptotic entropy rate, excess entropy, transient information, transient and asymptotic state uncertainties, and synchronization information of stochastic processes generated by finite-state hidden Markov models. This introduces analytical tractability to investigating information processing in discrete-event stochastic processes, symbolic dynamics, and chaotic dynamical systems. Comparisons reveal mathematical similarities between complexity measures originally thought to capture distinct informational and computational properties. We also introduce a new kind of spectral analysis via coronal spectrograms and the frequency-dependent spectra of past-future mutual information. We analyze a number of examples to illustrate the methods, emphasizing processes with multivariate dependencies beyond pairwise correlation. This includes spectral decomposition calculations for one representative example in full detail.

  20. Advanced Kalman Filter for Real-Time Responsiveness in Complex Systems

    Energy Technology Data Exchange (ETDEWEB)

    Welch, Gregory Francis [UNC-Chapel Hill/University of Central Florida; Zhang, Jinghe [UNC-Chapel Hill/Virginia Tech

    2014-06-10

    Complex engineering systems pose fundamental challenges in real-time operations and control because they are highly dynamic systems consisting of a large number of elements with severe nonlinearities and discontinuities. Today’s tools for real-time complex system operations are mostly based on steady state models, unable to capture the dynamic nature and too slow to prevent system failures. We developed advanced Kalman filtering techniques and the formulation of dynamic state estimation using Kalman filtering techniques to capture complex system dynamics in aiding real-time operations and control. In this work, we looked at complex system issues including severe nonlinearity of system equations, discontinuities caused by system controls and network switches, sparse measurements in space and time, and real-time requirements of power grid operations. We sought to bridge the disciplinary boundaries between Computer Science and Power Systems Engineering, by introducing methods that leverage both existing and new techniques. While our methods were developed in the context of electrical power systems, they should generalize to other large-scale scientific and engineering applications.

  1. On an inequality for non-normal operators

    International Nuclear Information System (INIS)

    Duggal, B.P.

    1992-07-01

    Starting from the inequality proved by Takayuki Furuta for a dominant operator A on a complex Hilbert space H, which extends to all operators such that the pure part of A has empty point spectrum, it is shown that if A is a contraction (on a separable complex Hilbert space) with simple eigenvalues and C 0 completely non-unitary part, and if (1-A*A) 1/2 is of Hilbert-Schmidt class, then the said inequality holds for A. 8 refs

  2. Safety management of a complex R&D ground operating system

    Science.gov (United States)

    Connors, J.; Mauer, R. A.

    1975-01-01

    Report discusses safety program implementation for large R&D operating system. Analytical techniques are defined and suggested as tools for identifying potential hazards and determining means to effectively control or eliminate hazards.

  3. On the Similarity of Sturm-Liouville Operators with Non-Hermitian Boundary Conditions to Self-Adjoint and Normal Operators

    Czech Academy of Sciences Publication Activity Database

    Krejčiřík, David; Siegl, Petr; Železný, Jakub

    2014-01-01

    Roč. 8, č. 1 (2014), s. 255-281 ISSN 1661-8254 R&D Projects: GA MŠk LC06002; GA MŠk LC527; GA ČR GAP203/11/0701 Grant - others:GA ČR(CZ) GD202/08/H072 Institutional support: RVO:61389005 Keywords : Sturm-Liouville operators * non-symmetric Robin boundary conditions * similarity to normal or self-adjoint operators * discrete spectral operator * complex symmetric operator * PT-symmetry * metric operator * C operator * Hilbert- Schmidt operators Subject RIV: BE - Theoretical Physics Impact factor: 0.545, year: 2014

  4. Psychology of NPP operation safety

    International Nuclear Information System (INIS)

    Tret'yakov, V.P.

    1993-01-01

    The book is devoted to psychologic investigations into different aspects of NPP operative personnel activities. The whole set of conditions on which successful and accident-free personnel operation depends, is analysed. Based on original engineering and socio-psychologic investigations complex psychologic support for NPP personnel and a system of training and upkeep of operative personnel skills are developed. The methods proposed have undergone a practical examination and proved their efficiency. 154 refs., 12 figs., 9 tabs

  5. Complex responsibilities : An empirical analysis of responsibilities and technological complexity in Dutch immigration policies

    NARCIS (Netherlands)

    Meijer, A.J.

    2009-01-01

    Complex patterns of (international) co-operation between public and private actors are facilitated by new information and communication technologies. New technological practices challenge current systems of political, public management and frontline staff responsibilities since these

  6. Modeling and Analyzing Operational Decision-Making Synchronization of C2 Organization in Complex Environment

    Directory of Open Access Journals (Sweden)

    Zou Zhigang

    2013-01-01

    Full Text Available In order to improve capability of operational decision-making synchronization (ODMS in command and control (C2 organization, the paper puts forward that ODMS is the negotiation process of situation cognition with three phases about “situation cognition, situation interaction and decision-making synchronization” in complex environment, and then the model and strategies of ODMS are given in quantity. Firstly, measure indexes of three steps above are given in the paper based on the time consumed in negotiation, and three patterns are proposed for negotiating timely in high quality during situation interaction. Secondly, the ODMS model with two stages in continuous changing situation is put forward in the paper, and ODMS strategies are analyzed within environment influence and time restriction. Thirdly, simulation cases are given to validate the process of ODMS under different continuous changing situations the results of this model are better than the other previous models to fulfill the actual restrictions, and the process of ODMS can be adjusted more reasonable for improving the capability of ODMS. Then we discuss the case and summarize the influence factors of ODMS in the C2 organization as organization structure, shared information resources, negotiation patterns, and allocation of decision rights.

  7. Representing Operational Modes for Situation Awareness

    International Nuclear Information System (INIS)

    Kirchhübel, Denis; Lind, Morten; Ravn, Ole

    2017-01-01

    Operating complex plants is an increasingly demanding task for human operators. Diagnosis of and reaction to on-line events requires the interpretation of real time data. Vast amounts of sensor data as well as operational knowledge about the state and design of the plant are necessary to deduct reasonable reactions to abnormal situations. Intelligent computational support tools can make the operator’s task easier, but they require knowledge about the overall system in form of some model. While tools used for fault-tolerant control design based on physical principles and relations are valuable tools for designing robust systems, the models become too complex when considering the interactions on a plant-wide level. The alarm systems meant to support human operators in the diagnosis of the plant-wide situation on the other hand fail regularly in situations where these interactions of systems lead to many related alarms overloading the operator with alarm floods. Functional modelling can provide a middle way to reduce the complexity of plant-wide models by abstracting from physical details to more general functions and behaviours. Based on functional models the propagation of failures through the interconnected systems can be inferred and alarm floods can potentially be reduced to their root-cause. However, the desired behaviour of a complex system changes due to operating procedures that require more than one physical and functional configuration. In this paper a consistent representation of possible configurations is deduced from the analysis of an exemplary start-up procedure by functional models. The proposed interpretation of the modelling concepts simplifies the functional modelling of distinct modes. The analysis further reveals relevant links between the quantitative sensor data and the qualitative perspective of the diagnostics tool based on functional models. This will form the basis for the ongoing development of a novel real-time diagnostics system based

  8. Representing Operational Modes for Situation Awareness

    Science.gov (United States)

    Kirchhübel, Denis; Lind, Morten; Ravn, Ole

    2017-01-01

    Operating complex plants is an increasingly demanding task for human operators. Diagnosis of and reaction to on-line events requires the interpretation of real time data. Vast amounts of sensor data as well as operational knowledge about the state and design of the plant are necessary to deduct reasonable reactions to abnormal situations. Intelligent computational support tools can make the operator’s task easier, but they require knowledge about the overall system in form of some model. While tools used for fault-tolerant control design based on physical principles and relations are valuable tools for designing robust systems, the models become too complex when considering the interactions on a plant-wide level. The alarm systems meant to support human operators in the diagnosis of the plant-wide situation on the other hand fail regularly in situations where these interactions of systems lead to many related alarms overloading the operator with alarm floods. Functional modelling can provide a middle way to reduce the complexity of plant-wide models by abstracting from physical details to more general functions and behaviours. Based on functional models the propagation of failures through the interconnected systems can be inferred and alarm floods can potentially be reduced to their root-cause. However, the desired behaviour of a complex system changes due to operating procedures that require more than one physical and functional configuration. In this paper a consistent representation of possible configurations is deduced from the analysis of an exemplary start-up procedure by functional models. The proposed interpretation of the modelling concepts simplifies the functional modelling of distinct modes. The analysis further reveals relevant links between the quantitative sensor data and the qualitative perspective of the diagnostics tool based on functional models. This will form the basis for the ongoing development of a novel real-time diagnostics system based

  9. Complex relationship between seasonal streamflow forecast skill and value in reservoir operations

    Directory of Open Access Journals (Sweden)

    S. W. D. Turner

    2017-09-01

    Full Text Available Considerable research effort has recently been directed at improving and operationalising ensemble seasonal streamflow forecasts. Whilst this creates new opportunities for improving the performance of water resources systems, there may also be associated risks. Here, we explore these potential risks by examining the sensitivity of forecast value (improvement in system performance brought about by adopting forecasts to changes in the forecast skill for a range of hypothetical reservoir designs with contrasting operating objectives. Forecast-informed operations are simulated using rolling horizon, adaptive control and then benchmarked against optimised control rules to assess performance improvements. Results show that there exists a strong relationship between forecast skill and value for systems operated to maintain a target water level. But this relationship breaks down when the reservoir is operated to satisfy a target demand for water; good forecast accuracy does not necessarily translate into performance improvement. We show that the primary cause of this behaviour is the buffering role played by storage in water supply reservoirs, which renders the forecast superfluous for long periods of the operation. System performance depends primarily on forecast accuracy when critical decisions are made – namely during severe drought. As it is not possible to know in advance if a forecast will perform well at such moments, we advocate measuring the consistency of forecast performance, through bootstrap resampling, to indicate potential usefulness in storage operations. Our results highlight the need for sensitivity assessment in value-of-forecast studies involving reservoirs with supply objectives.

  10. Radiation protection optimization in the CAETITE industrial complex

    International Nuclear Information System (INIS)

    Azevedo Py Junior, D.; Figueiredo, N.; Dos Santos Dias, P.L.; Mantovani Lima, H.

    2002-01-01

    This paper presents, briefly, the radiation protection aspects of process, project and operation of the Caetite Industrial Complex, CIC. Planing priorities were to minimize Environmental Radiological Impact and Occupational Radiological Risk - Based on previous experiences, the process and the project were optimized, in order to minimize environmental impact and allow simultaneous natural environment restoration and operation. Technical, practical and economical advantages became evident during all project fazes, from the initial project development to the conclusion of all decommissioning steps. Planing, conducts. adequate working methods and workers training, together, turned out to be the most efficient way for occupational radiological risk reduction. This efficiency was proved during operational tests and initial operation of the Complex. Radiation Protection optimization is achieved by worker's responsibility, turning safety corrections interference less frequents, rising consequently, minimizing environmental impact. (author)

  11. Saving money on rig refurbishments through foreign trade zones or duty-drawback

    International Nuclear Information System (INIS)

    Ward, R.J. Jr.

    1997-01-01

    The recent boom in day rates for rigs capable of drilling in deep water and harsh environments has created a frenzy of rig refurbishment activity in shipyards located in US Gulf states. In most instances, the destination for the rigs upon completion is the US Outer Continental Shelf (USOCS) in the Gulf of Mexico. The problem faced by contractors/operators planning to use US shipyards is that this circumstance has caused difficulty in shielding rigs and their foreign-sourced components from US Customs duties. Under US Customs law, a bona fide exportation requires severance from US commerce and joining to the commerce of some foreign country or, in the case of a vessel supply, a qualifying international voyage. The USOCS does not qualify as an exportation, nor do movements to drilling sites located on it qualify as an international voyage. Described here are two possible solutions to this economic dilemma and an example of how the foreign trade zone solution was applied by Global marine in its plans for upgrading some of its semisubmersible drilling rigs for deepwater USOCS work

  12. Integrated pollution control for oil refinery complexes

    Energy Technology Data Exchange (ETDEWEB)

    Kiperstok, A [Bahia Univ., Salvador, BA (Brazil); Sharratt, P N [Manchester Univ. (United Kingdom). Inst. of Science and Technology

    1994-12-31

    Improving environmental performance of oil refineries is a complex task. Emission limits, operating constraints, available technologies, operating techniques, and local environment sensitivity must all be considered. This work describes efforts to build an interactive software to deal with this problem. 8 refs., 5 figs.

  13. Integrated pollution control for oil refinery complexes

    Energy Technology Data Exchange (ETDEWEB)

    Kiperstok, A. [Bahia Univ., Salvador, BA (Brazil); Sharratt, P.N. [Manchester Univ. (United Kingdom). Inst. of Science and Technology

    1993-12-31

    Improving environmental performance of oil refineries is a complex task. Emission limits, operating constraints, available technologies, operating techniques, and local environment sensitivity must all be considered. This work describes efforts to build an interactive software to deal with this problem. 8 refs., 5 figs.

  14. The BRST complex as the square root of the Casimir operator

    International Nuclear Information System (INIS)

    Holten, J.W. van

    1990-02-01

    The authors investigate the BRST cohomology of compact Lie algebras. An anti-BRST operator different from the one usually defined is introduced to construct a BRST invariant operator W, the zero-modes of which are in one-to-one correspondence with the BRST cohomology. Solutions to the BRST cohomology conditions with different ghost number are shown to exist, all of which can be used to define a physical state space for a constrained quantum system. A connection with sypersymmetric topological quantum theories is observed. (author). 17 refs

  15. Modeling and Design of Container Terminal Operations

    NARCIS (Netherlands)

    D. Roy (Debjit); M.B.M. de Koster (René)

    2014-01-01

    textabstractDesign of container terminal operations is complex because multiple factors affect the operational perfor- mance. These factors include: topological constraints, a large number of design parameters and settings, and stochastic interactions that interplay among the quayside, vehicle

  16. Complex analysis of energy efficiency in operated high-rise residential building: Case study

    Science.gov (United States)

    Korniyenko, Sergey

    2018-03-01

    Energy conservation and human thermal comfort enhancement in buildings is a topical issue of modern architecture and construction. The innovative solution of this problem makes it possible to enhance building ecological and maintenance safety, to reduce hydrocarbon fuel consumption, and to improve life standard of people. The requirements to increase of energy efficiency in buildings should be provided at all the stages of building's life cycle that is at the stage of design, construction and maintenance of buildings. The research purpose is complex analysis of energy efficiency in operated high-rise residential building. Many actions for building energy efficiency are realized according to the project; mainly it is the effective building envelope and engineering systems. Based on results of measurements the energy indicators of the building during annual period have been calculated. The main reason of increase in heat losses consists in the raised infiltration of external air in the building through a building envelope owing to the increased air permeability of windows and balcony doors (construction defects). Thermorenovation of the building based on ventilating and infiltration heat losses reduction through a building envelope allows reducing annual energy consumption. Energy efficiency assessment based on the total annual energy consumption of building, including energy indices for heating and a ventilation, hot water supply and electricity supply, in comparison with heating is more complete. The account of various components in building energy balance completely corresponds to modern direction of researches on energy conservation and thermal comfort enhancement in buildings.

  17. Use of bayesian operations for diagnosing accidents

    International Nuclear Information System (INIS)

    Kang, K.M.; Jae, M.; Suh, K.Y.

    2005-01-01

    In complex systems, it is necessary to model a logical representation of the overall system interaction with respect to the individual subsystems. Operators are allowed to follow EOPs (Emergency Operating Procedures) when reactor tripped because of accidents. But, it's very difficult to diagnose accidents and find out appropriate procedures to mitigate current accidents in a given short time. Even if they diagnose accidents, it also has possibility to misdiagnose. TMI accident is a good example of operators' errors. Methodology using Influence Diagrams has been developed and applied for representing the dependency behaviors and uncertain behaviors of complex systems. An example to diagnose the accidents such as SLOCA and SGTR with similar symptoms has been introduced. From the constructed model, operators could diagnose accidents at any states of accidents. This model can offer the information about accidents with given symptoms. This model might help operators to diagnose correctly and rapidly. It might be very useful to support operators to reduce human error. Also, from this study, it is applicable to diagnose other accidents with similar symptoms and to analyze causes of reactor trip. (authors)

  18. On the invertibility of elementary operators

    OpenAIRE

    Boudi, Nadia; Bračič, Janko

    2013-01-01

    Let $\\mathscr{X}$ be a complex Banach space and $\\mathcal{L}(\\mathscr{X})$ be the algebra of all bounded linear operators on $\\mathscr{X}$. For a given elementary operator $\\Phi$ of length $2$ on $\\mathcal{L}(\\mathscr{X})$, we determine necessary and sufficient conditions for the existence of a solution of the equation ${\\rm X} \\Phi=0$ in the algebra of all elementary operators on $\\mathcal{L}(\\mathscr{X})$. Our approach allows us to characterize some invertible elementary operators of length...

  19. Operational Research : Congress of APDIO, the Portuguese Operational Research Society

    CERN Document Server

    Almeida, João; Oliveira, José; Pinto, Alberto

    2018-01-01

    This proceedings book presents selected contributions from the XVIII Congress of APDIO (the Portuguese Association of Operational Research) held in Valença on June 28–30, 2017. Prepared by leading Portuguese and international researchers in the field of operations research, it covers a wide range of complex real-world applications of operations research methods using recent theoretical techniques, in order to narrow the gap between academic research and practical applications. Of particular interest are the applications of, nonlinear and mixed-integer programming, data envelopment analysis, clustering techniques, hybrid heuristics, supply chain management, and lot sizing and job scheduling problems. In most chapters, the problems, methods and methodologies described are complemented by supporting figures, tables and algorithms.   The XVIII Congress of APDIO marked the 18th installment of the regular biannual meetings of APDIO – the Portuguese Association of Operational Research. The meetings bring toget...

  20. Operator behaviors observed in following emergency operating procedure under a simulated emergency

    International Nuclear Information System (INIS)

    Choi, Sun Yeong; Park, Jin Kyun

    2012-01-01

    A symptom-based procedure with a critical safety function monitoring system has been established to reduce the operator's diagnosis and cognitive burden since the Three-Mile Island (TMI) accident. However, it has been reported that a symptom-based procedure also requires an operator's cognitive efforts to cope with off-normal events. This can be caused by mismatches between a static model, an emergency operating procedure (EOP), and a dynamic process, the nature of an ongoing situation. The purpose of this study is to share the evidence of mismatches that may result in an excessive cognitive burden in conducting EOPs. For this purpose, we analyzed simulated emergency operation records and observed some operator behaviors during the EOP operation: continuous steps, improper description, parameter check at a fixed time, decision by information previously obtained, execution complexity, operation by the operator's knowledge, notes and cautions, and a foldout page. Since observations in this study are comparable to the results of an existing study, it is expected that the operational behaviors observed in this study are generic features of operators who have to cope with a dynamic situation using a static procedure.

  1. Fluid logic control circuit operates nutator actuator motor

    Science.gov (United States)

    1966-01-01

    Fluid logic control circuit operates a pneumatic nutator actuator motor. It has no moving parts and consists of connected fluid interaction devices. The operation of this circuit demonstrates the ability of fluid interaction devices to operate in a complex combination of series and parallel logic sequence.

  2. Actions to ensure the power and utilities supplying during the start-up and regular operation of the TKCSA steel complex through island operation mode; Acoes para garantir o suprimento de energia eletrica e utilidades durante a fase de start up e de operacao regular do complexo siderurgico da TKCSA (Thyssenkrupp - Companhia Siderurgica do Atlantico) atraves do modo de operacao em ilha

    Energy Technology Data Exchange (ETDEWEB)

    Vianna, Bernardo Matoso T.; Viana, Claudio Sobreira; Vaz, Daniel; Cesario, Fabricio; Pereira, Jose Antonio; Gimenez, Marcus Vinicius O.; Pascotto, Ricardo; Freitas Neto, Roberto Soares; Riederer, Werner [ThyssenKrupp Companhia Siderurgica do Atlantico (TKCSA), Rio de Janeiro, RJ (Brazil)

    2011-12-21

    At TKCSA, the energy and media distribution has an important function in the production processes. The electrical department is responsible for the power system operation, ensuring the receiving, transformation and supplying of this media for the regular and stable operation of the electrical equipment of the steel processes, and another important assignment of the electrical power sector is to guarantee the continuous power supply for the complex, even in case of interruption caused by the external grid, since the blast furnace, steel making and continuous casting cannot be interrupted abruptly. This continuous supply of energy is guaranteed by the Island Operation Mode (IOM), which always aims to ensure the supply of electricity from the Power Plant for the blowers, technical gases distribution system, fuel gases, steam and internal distribution of electricity and industrial water for the steel mill complex. During the complex start up and the regular operation phases, these two distribution systems (electricity and media) work interconnected and are kept in operation by the IOM, being guaranteed by the permanent operation of the electrical power generation system of Power Plant. This work presents how this concept was developed, tested and implemented at TKCSA. (author)

  3. Representing Operational Modes for Situation Awareness

    DEFF Research Database (Denmark)

    Kirchhübel, Denis; Lind, Morten; Ravn, Ole

    2017-01-01

    reasonable reactions to abnormal situations. Intelligent computational support tools can make the operator's task easier, but they require knowledge about the overall system in form of some model. While tools used for fault-tolerant control design based on physical principles and relations are valuable tools...... for designing robust systems, the models become too complex when considering the interactions on a plant-wide level. The alarm systems meant to support human operators in the diagnosis of the plant-wide situation on the other hand fail regularly in situations where these interactions of systems lead to many...... the interconnected systems can be inferred and alarm floods can potentially be reduced to their root-cause. However, the desired behaviour of a complex system changes due to operating procedures that require more than one physical and functional configuration. In this paper a consistent representation of possible...

  4. A cognitive model of human behaviour for simulating operators of complex plants

    International Nuclear Information System (INIS)

    Cacciabue, P.C.; Mancini, G.; Bersini, U.

    1988-01-01

    This paper discusses the need of a 'deterministic' representation of the operator's reasoning and sensory-motor behaviour in order to approach correctly the overall problem of Man-Machine Interaction (MMI). Such type of modelling represents a fundamental complement to the merely probabilistic quantification of operator performances for safety as well as for design purposes. A cognitive model, formally based on a hierarchical goal-oriented approach and driven by fuzzy logic methodology, is then presented and briefly discussed, including the psychological criteria by which the content of operators' knowledge is exploited for instantiation of strategies during emergencies. Finally the potential applications of such methodology are reviewed identifying limits and advantages in comparison to more classical and mechanicistic approaches. (author)

  5. STRATEGIC MANAGEMENT OF TRANSPORT CARGO COMPLEX

    Directory of Open Access Journals (Sweden)

    A. M. Okorokov

    2014-06-01

    Full Text Available Purpose. Making the qualitative administrative decisions defining strategy and tactics of transport cargo complexes development, and also its subsystems, is possible only in the presence of flexible optimization model. This model has to consider multiparametricity and multicriteriality of the given task, uncertainty and vagueness of input information, and also to provide process automation of searching the best parameters of the given production facility. The purpose of the research is to develop procedures for the strategic management of complex with view of the most important factors and their stochastic nature, which will execute the improvement of technical equipment of TCC. Methodology. The problem of strategic management is based on solving the complex of issues of the optimal number of shunting locomotives, optimal processing capability of handling the front and rational capacity of warehouses. The problem is solved on the basis of the proposed optimality criterion – the specific set of profit per unit of capital assets of freight industry. The listed problems are solved using simulation modeling of the freight industry. Findings. The use of developed procedure allows one to improve the technical equipment of the freight stations and complexes. Originality. For the first time it was developed the procedure of strategic management of development. This procedure allows taking into account the probabilistic nature of demand for services of transport freight complexes and technological processes of client services on the complex stations. The proposed procedure can be applied during when planning the investments in the creation of transport freight complexes. Practical value. Use as a basic tool of simulation models of complex cargo operation allows estimating the effectiveness of the capital investments, the level of operating costs, as well as the quality of meeting the demands of potential customers in transportations at the stage of

  6. Operation of the UKK-2 facility for tube complex testing and way of its further improvement

    International Nuclear Information System (INIS)

    Ogarkov, N.V.; Senyutkin, P.A.; Silaev, A.N.; Topychkanov, V.V.

    1987-01-01

    The UKK-2 ultrasonic 8-channel facility for complex control is designed for control of continuity, wall thickness of 0.3-1.0 mm, inner diameter of tubes and external diameter of 7-15 mm. Utilization of UKK-2 increased reliability of control, stabilized tube quality at a higher level, increased control efficiency 2-3 times. The most noticeable shortcomings of the UKK-2 are as follows: impossibility of differential separation of tubes rejected by sizes, by rectifiable and nonrectifiable rejects as well as absence of devices for mechanized loading, unloading and grading the tubes. The flowsheet, design and technological shortcomings of the facility are discovered during its operation. Ways of further improvement of the facility are as follows: development of the system for control result analysis on the basis of a microcomputer, equipment with devices for loading, unloading and grading the tubes; development of more reliable electron devices and units, means of automated diagnostics and automated tuning, increase of the level of metrological provision, improvement of hardware and software of the facility

  7. Kneser-Hecke-operators in coding theory

    OpenAIRE

    Nebe, Gabriele

    2005-01-01

    The Kneser-Hecke-operator is a linear operator defined on the complex vector space spanned by the equivalence classes of a family of self-dual codes of fixed length. It maps a linear self-dual code $C$ over a finite field to the formal sum of the equivalence classes of those self-dual codes that intersect $C$ in a codimension 1 subspace. The eigenspaces of this self-adjoint linear operator may be described in terms of a coding-theory analogue of the Siegel $\\Phi $-operator.

  8. A complexity science-based framework for global joint operations analysis to support force projection: LDRD Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Craig R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). System Sustainment & Readiness Technologies Dept.

    2015-01-01

    The military is undergoing a significant transformation as it modernizes for the information age and adapts to address an emerging asymmetric threat beyond traditional cold war era adversaries. Techniques such as traditional large-scale, joint services war gaming analysis are no longer adequate to support program evaluation activities and mission planning analysis at the enterprise level because the operating environment is evolving too quickly. New analytical capabilities are necessary to address modernization of the Department of Defense (DoD) enterprise. This presents significant opportunity to Sandia in supporting the nation at this transformational enterprise scale. Although Sandia has significant experience with engineering system of systems (SoS) and Complex Adaptive System of Systems (CASoS), significant fundamental research is required to develop modeling, simulation and analysis capabilities at the enterprise scale. This report documents an enterprise modeling framework which will enable senior level decision makers to better understand their enterprise and required future investments.

  9. Theory of complex potential scattering

    International Nuclear Information System (INIS)

    Kok, L.P.; Haeringen, H.v.

    1981-01-01

    We study the effect of the addition of a complex potential lambdaV/sub sep/ to an arbitrary Schroedinger operator H = H 0 +V on the singularities of the S matrix, as a function of lambda. Here V/sub sep/ is a separable interaction, and lambda is a complex coupling parameter. The paths of these singularities are determined to a great extent by certain saddle points in the momentum (or energy) plane. We explain certain critical phenomena recently reported in the literature. Associated with these saddles are branch-type singularities in the complex lambda plane, which are dynamical in origin. Some examples are discussed in detail

  10. Modeling and Simulation for Mission Operations Work System Design

    Science.gov (United States)

    Sierhuis, Maarten; Clancey, William J.; Seah, Chin; Trimble, Jay P.; Sims, Michael H.

    2003-01-01

    Work System analysis and design is complex and non-deterministic. In this paper we describe Brahms, a multiagent modeling and simulation environment for designing complex interactions in human-machine systems. Brahms was originally conceived as a business process design tool that simulates work practices, including social systems of work. We describe our modeling and simulation method for mission operations work systems design, based on a research case study in which we used Brahms to design mission operations for a proposed discovery mission to the Moon. We then describe the results of an actual method application project-the Brahms Mars Exploration Rover. Space mission operations are similar to operations of traditional organizations; we show that the application of Brahms for space mission operations design is relevant and transferable to other types of business processes in organizations.

  11. Novel Complexity Indicator of Manufacturing Process Chains and Its Relations to Indirect Complexity Indicators

    Directory of Open Access Journals (Sweden)

    Vladimir Modrak

    2017-01-01

    Full Text Available Manufacturing systems can be considered as a network of machines/workstations, where parts are produced in flow shop or job shop environment, respectively. Such network of machines/workstations can be depicted as a graph, with machines as nodes and material flow between the nodes as links. The aim of this paper is to use sequences of operations and machine network to measure static complexity of manufacturing processes. In this order existing approaches to measure the static complexity of manufacturing systems are analyzed and subsequently compared. For this purpose, analyzed competitive complexity indicators were tested on two different manufacturing layout examples. A subsequent analysis showed relevant potential of the proposed method.

  12. ARCHITECTURE AND RELIABILITY OF OPERATING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Stanislav V. Nazarov

    2018-03-01

    Full Text Available Progress in the production technology of microprocessors significantly increased reliability and performance of the computer systems hardware. It cannot be told about the corresponding characteristics of the software and its basis – the operating system (OS. Some achievements of program engineering are more modest in this field. Both directions of OS improvement (increasing of productivity and reliability are connected with the development of effective structures of these systems. OS functional complexity leads to the multiplicity of the structure, which is further enhanced by the specialization of the operating system depending on scope of computer system (complex scientific calculations, real time, information retrieval systems, systems of the automated and automatic control, etc. The functional complexity of the OS leads to the complexity of its architecture, which is further enhanced by the specialization of the operating system, depending on the computer system application area (complex scientific calculations, real-time, information retrieval systems, automated and automatic control systems, etc.. That fact led to variety of modern OS. It is possible to estimate reliability of different OS structures only as results of long-term field experiment or simulation modeling. However it is most often unacceptable because of time and funds expenses for carrying out such research. This survey attempts to evaluate the reliability of two main OS architectures: large multi-layered modular core and a multiserver (client-server system. Represented by continuous Markov chains which are explored in the stationary mode on the basis of transition from systems of the differential equations of Kolmogorov to system of the linear algebraic equations, models of these systems are developed.

  13. Complex analysis of energy efficiency in operated high-rise residential building: Case study

    Directory of Open Access Journals (Sweden)

    Korniyenko Sergey

    2018-01-01

    Full Text Available Energy conservation and human thermal comfort enhancement in buildings is a topical issue of modern architecture and construction. The innovative solution of this problem makes it possible to enhance building ecological and maintenance safety, to reduce hydrocarbon fuel consumption, and to improve life standard of people. The requirements to increase of energy efficiency in buildings should be provided at all the stages of building's life cycle that is at the stage of design, construction and maintenance of buildings. The research purpose is complex analysis of energy efficiency in operated high-rise residential building. Many actions for building energy efficiency are realized according to the project; mainly it is the effective building envelope and engineering systems. Based on results of measurements the energy indicators of the building during annual period have been calculated. The main reason of increase in heat losses consists in the raised infiltration of external air in the building through a building envelope owing to the increased air permeability of windows and balcony doors (construction defects. Thermorenovation of the building based on ventilating and infiltration heat losses reduction through a building envelope allows reducing annual energy consumption. Energy efficiency assessment based on the total annual energy consumption of building, including energy indices for heating and a ventilation, hot water supply and electricity supply, in comparison with heating is more complete. The account of various components in building energy balance completely corresponds to modern direction of researches on energy conservation and thermal comfort enhancement in buildings.

  14. Computerized automatic tip scanning operation

    International Nuclear Information System (INIS)

    Nishikawa, K.; Fukushima, T.; Nakai, H.; Yanagisawa, A.

    1984-01-01

    In BWR nuclear power stations the Traversing Incore Probe (TIP) system is one of the most important components in reactor monitoring and control. In previous TIP systems, however, operators have suffered from the complexity of operation and long operation time required. The system presented in this paper realizes the automatic operation of the TIP system by monitoring and driving it with a process computer. This system significantly reduces the burden on customer operators and improves plant efficiency by simplifying the operating procedure, augmenting the accuracy of the measured data, and shortening operating time. The process computer is one of the PODIA (Plant Operation by Displayed Information Automation) systems. This computer transfers control signals to the TIP control panel, which in turn drives equipment by microprocessor control. The process computer contains such components as the CRT/KB unit, the printer plotter, the hard copier, and the message typers required for efficient man-machine communications. Its operation and interface properties are described

  15. Innovation in a complex environment

    Directory of Open Access Journals (Sweden)

    René Pellissier

    2012-11-01

    Objectives: The study objectives were, firstly, to establish the determinants for complexity and how these can be addressed from a design point of view in order to ensure innovation success and, secondly, to determine how this changes innovation forms and applications. Method: Two approaches were offered to deal with a complex environment – one allowing for complexity for organisational innovation and the other introducing reductionism to minimise complexity. These approaches were examined in a qualitative study involving case studies, open-ended interviews and content analysis between seven developing economy (South African organisations and seven developed economy (US organisations. Results: This study presented a proposed framework for (organisational innovation in a complex environment versus a framework that minimises complexity. The comparative organisational analysis demonstrated the importance of initiating organisational innovation to address internal and external complexity, with the focus being on the leadership actions, their selected operating models and resultant organisational innovations designs, rather than on technological innovations. Conclusion: This study cautioned the preference for technological innovation within organisations and suggested alternative innovation forms (such as organisational and management innovation be used to remain competitive in a complex environment.

  16. A METHOD OF COMPLEX AUTOMATED MONITORING OF UKRAINIAN POWER ENERGY SYSTEM OBJECTS TO INCREASE ITS OPERATION SAFETY

    Directory of Open Access Journals (Sweden)

    Ye.I. Sokol

    2016-05-01

    Full Text Available The paper describes an algorithm of the complex automated monitoring of Ukraine’s power energy system, aimed at ensuring safety of its personnel and equipment. This monitoring involves usage of unmanned aerial vehicles (UAVs for planned and unplanned registration status of power transmission lines (PTL and high-voltage substations (HVS. It is assumed that unscheduled overflights will be made in emergency situations on power lines. With the help of the UAV, pictures of transmission and HVS will be recorded from the air in the optical and infrared ranges, as well as strength of electric (EF and magnetic (MF fields will be measured along the route of flight. Usage specially developed software allows to compare the recorded pictures with pre-UAV etalon patterns corresponding to normal operation of investigated transmission lines and the HVSs. Such reference pattern together with the experimentally obtained maps of HVS’s protective grounding will be summarized in a single document – a passport of HVS and PTL. This passport must also contain the measured and calculated values of strength levels of EF and MF in the places where staff of power facilities stay as well as layout of equipment, the most vulnerable to the effects of electromagnetic interference. If necessary, as part of ongoing monitoring, recommendations will be given on the design and location of electromagnetic screens, reducing the levels of electromagnetic interference as well as on location of lightning rods, reducing probability lightning attachment to the objects. The paper presents analytic expressions, which formed the basis of the developed software for calculation of the EF strength in the vicinity of power lines. This software will be used as a base at UAV navigation along the transmission lines, as well as to detect violations in the transmission lines operation. Comparison of distributions of EF strength calculated with the help of the elaborated software with the known

  17. NPP operator support in decision making - diagnostics of the operation failures using fuzzy logic

    International Nuclear Information System (INIS)

    Petruzela, I.

    2000-01-01

    In large complex systems such as nuclear power plants (NPP) and chemical industry plants, various subsystems fulfil the needs of process control and safety. Continued operation of these systems has both economic and safety implications. Electric utilities seek continuously to improve the operation of power generating stations. The improvement in the NPP Dukovany (4 x 440 MW) is related to the introduction of the plant to frequency control, meaning that the plant is operated not only in the base load operational mode but in the load follow mode as well. To achieve the improvement of plant operation, it was necessary to provide modifications to the plant control system, plant information system and diagnostics. This chapter deals with utilisation of artificial intelligence (AI) methods in implementation of these plant modifications. (orig.)

  18. An operating environment for control systems on transputer networks

    NARCIS (Netherlands)

    Tillema, H.G.; Schoute, Albert L.; Wijbrans, K.C.J.; Wijbrans, K.C.J.

    1991-01-01

    The article describes an operating environment for control systems. The environment contains the basic layers of a distributed operating system. The design of this operating environment is based on the requirements demanded by controllers which can be found in complex control systems. Due to the

  19. Faster Black-Box Algorithms Through Higher Arity Operators

    DEFF Research Database (Denmark)

    Doerr, Benjamin; Johannsen, Daniel; Kötzing, Timo

    2011-01-01

    We extend the work of Lehre and Witt (GECCO 2010) on the unbiased black-box model by considering higher arity variation operators. In particular, we show that already for binary operators the black-box complexity of LeadingOnes drops from (n2) for unary operators to O(n log n). For OneMax, the (n...

  20. Launch and Landing Effects Ground Operations (LLEGO) Model

    Science.gov (United States)

    2008-01-01

    LLEGO is a model for understanding recurring launch and landing operations costs at Kennedy Space Center for human space flight. Launch and landing operations are often referred to as ground processing, or ground operations. Currently, this function is specific to the ground operations for the Space Shuttle Space Transportation System within the Space Shuttle Program. The Constellation system to follow the Space Shuttle consists of the crewed Orion spacecraft atop an Ares I launch vehicle and the uncrewed Ares V cargo launch vehicle. The Constellation flight and ground systems build upon many elements of the existing Shuttle flight and ground hardware, as well as upon existing organizations and processes. In turn, the LLEGO model builds upon past ground operations research, modeling, data, and experience in estimating for future programs. Rather than to simply provide estimates, the LLEGO model s main purpose is to improve expenses by relating complex relationships among functions (ground operations contractor, subcontractors, civil service technical, center management, operations, etc.) to tangible drivers. Drivers include flight system complexity and reliability, as well as operations and supply chain management processes and technology. Together these factors define the operability and potential improvements for any future system, from the most direct to the least direct expenses.

  1. Considerations on the hyperbolic complex Klein-Gordon equation

    International Nuclear Information System (INIS)

    Ulrych, S.

    2010-01-01

    This article summarizes and consolidates investigations on hyperbolic complex numbers with respect to the Klein-Gordon equation for fermions and bosons. The hyperbolic complex numbers are applied in the sense that complex extensions of groups and algebras are performed not with the complex unit, but with the product of complex and hyperbolic unit. The modified complexification is the key ingredient for the theory. The Klein-Gordon equation is represented in this framework in the form of the first invariant of the Poincare group, the mass operator, in order to emphasize its geometric origin. The possibility of new interactions arising from hyperbolic complex gauge transformations is discussed.

  2. Toeplitz Operators, Pseudo-Homogeneous Symbols, and Moment Maps on the Complex Projective Space

    Directory of Open Access Journals (Sweden)

    Miguel Antonio Morales-Ramos

    2017-01-01

    Full Text Available Following previous works for the unit ball due to Nikolai Vasilevski, we define quasi-radial pseudo-homogeneous symbols on the projective space and obtain the corresponding commutativity results for Toeplitz operators. A geometric interpretation of these symbols in terms of moment maps is developed. This leads us to the introduction of a new family of symbols, extended pseudo-homogeneous, that provide larger commutative Banach algebras generated by Toeplitz operators. This family of symbols provides new commutative Banach algebras generated by Toeplitz operators on the unit ball.

  3. An adaptive simulation model for analysis of nuclear material shipping operations

    International Nuclear Information System (INIS)

    Boerigter, S.T.; Sena, D.J.; Fasel, J.H.

    1998-01-01

    Los Alamos has developed an advanced simulation environment designed specifically for nuclear materials operations. This process-level simulation package, the Process Modeling System (ProMoS), is based on high-fidelity material balance criteria and contains intrinsic mechanisms for waste and recycle flows, contaminant estimation and tracking, and material-constrained operations. Recent development efforts have focused on coupling complex personnel interactions, personnel exposure calculations, and stochastic process-personnel performance criteria to the material-balance simulation. This combination of capabilities allows for more realistic simulation of nuclear material handling operations where complex personnel interactions are required. They have used ProMoS to assess fissile material shipping performance characteristics at the Los Alamos National Laboratory plutonium facility (TA-55). Nuclear material shipping operations are ubiquitous in the DOE complex and require the largest suite of varied personnel interacting in a well-timed manner to accomplish the task. They have developed a baseline simulation of the present operations and have estimated the operational impacts and requirement of the pit production mission at TA-55 as a result of the SSM-PEIS. Potential bottlenecks have been explored and mechanisms for increasing operational efficiency are identified

  4. Composition operators on function spaces

    CERN Document Server

    Singh, RK

    1993-01-01

    This volume of the Mathematics Studies presents work done on composition operators during the last 25 years. Composition operators form a simple but interesting class of operators having interactions with different branches of mathematics and mathematical physics. After an introduction, the book deals with these operators on Lp-spaces. This study is useful in measurable dynamics, ergodic theory, classical mechanics and Markov process. The composition operators on functional Banach spaces (including Hardy spaces) are studied in chapter III. This chapter makes contact with the theory of analytic functions of complex variables. Chapter IV presents a study of these operators on locally convex spaces of continuous functions making contact with topological dynamics. In the last chapter of the book some applications of composition operators in isometries, ergodic theory and dynamical systems are presented. An interesting interplay of algebra, topology, and analysis is displayed. This comprehensive and up-to-date stu...

  5. Complex cellular logic computation using ribocomputing devices.

    Science.gov (United States)

    Green, Alexander A; Kim, Jongmin; Ma, Duo; Silver, Pamela A; Collins, James J; Yin, Peng

    2017-08-03

    Synthetic biology aims to develop engineering-driven approaches to the programming of cellular functions that could yield transformative technologies. Synthetic gene circuits that combine DNA, protein, and RNA components have demonstrated a range of functions such as bistability, oscillation, feedback, and logic capabilities. However, it remains challenging to scale up these circuits owing to the limited number of designable, orthogonal, high-performance parts, the empirical and often tedious composition rules, and the requirements for substantial resources for encoding and operation. Here, we report a strategy for constructing RNA-only nanodevices to evaluate complex logic in living cells. Our 'ribocomputing' systems are composed of de-novo-designed parts and operate through predictable and designable base-pairing rules, allowing the effective in silico design of computing devices with prescribed configurations and functions in complex cellular environments. These devices operate at the post-transcriptional level and use an extended RNA transcript to co-localize all circuit sensing, computation, signal transduction, and output elements in the same self-assembled molecular complex, which reduces diffusion-mediated signal losses, lowers metabolic cost, and improves circuit reliability. We demonstrate that ribocomputing devices in Escherichia coli can evaluate two-input logic with a dynamic range up to 900-fold and scale them to four-input AND, six-input OR, and a complex 12-input expression (A1 AND A2 AND NOT A1*) OR (B1 AND B2 AND NOT B2*) OR (C1 AND C2) OR (D1 AND D2) OR (E1 AND E2). Successful operation of ribocomputing devices based on programmable RNA interactions suggests that systems employing the same design principles could be implemented in other host organisms or in extracellular settings.

  6. On Univalence Criteria for a General Integral Operator

    Directory of Open Access Journals (Sweden)

    Vasile Marius Macarie

    2012-01-01

    Full Text Available We consider a new general integral operator, and we give sufficient conditions for the univalence of this integral operator in the open unit disk of the complex plane. Several consequences of the main results are also shown.

  7. Division in a Binary Representation for Complex Numbers

    Science.gov (United States)

    Blest, David C.; Jamil, Tariq

    2003-01-01

    Computer operations involving complex numbers, essential in such applications as Fourier transforms or image processing, are normally performed in a "divide-and-conquer" approach dealing separately with real and imaginary parts. A number of proposals have treated complex numbers as a single unit but all have foundered on the problem of the…

  8. The role of metal complexes in nuclear reactor decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Prince, A.A.M.; Raghavan, P.S.; Gopalan, R. [Madras Christian College, Tambaram, Chennai (India); Velmurugan, S.; Narasimhan, S.V. [Bhabha Atomic Research Center (BARC) (IN). Water and Steam Chemistry Lab. (WSCL)

    2006-07-15

    Chemical decontamination is the process of removal of radioactivity from corrosion products formed on structural materials in the nuclear reactors. These corrosion products cause problems for the operation and maintenance of the plants. Removal of the radioactive contaminants can be achieved by dissolving the oxide from the system surface using organic complexing agents in low concentrations known as dilute chemical decontamination (DCD) formulations. These organic complexing agents attack the oxide surface and form metal complexes, which further accelerate the dissolution process. The stability of the complexes plays an important role in dissolving the radioactive contaminated oxides. In addition, the DCD process is operated through ion exchange resins for the removal of the dissolved metal ions and radioactive nuclides. In the present study, the kinetics of dissolution of various model corrosion products such as magnetite (Fe{sub 3}O{sub 4}), hematite ({alpha}-Fe{sub 2}O{sub 3}) and maghemite ({gamma}-Fe{sub 2}O{sub 3}) have been studied in the presence of complexing agents such as ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), hydroxyethylethylenediaminepentaacetic acid (HEEDTA), and 2,6 pyridinedicarboxylic acid (PDCA). The reductive roles of metal complexes and organic reducing agents are discussed. (orig.)

  9. Remote operations and viewing using the monitor system

    International Nuclear Information System (INIS)

    Grisham, D.L.; Lambert, J.E.; Baldwin, T.S.; Ekberg, E.L.; Hernandez, T.R.; Raybun, J.L.

    1984-01-01

    Over the past two years, major rebuilding operations were conducted at the Clinton P. Anderson Meson Physics Facility (LAMPF). These operations involved replacement of complex experimental apparatus in high-radiation areas using servomanipulators and video viewing. All remote tasks were completed on or ahead of allotted schedules. This success is attributed to continuing improvement of manipulators, viewing systems, and operating techniques

  10. Systems and operations - Living with complexity and growth

    Science.gov (United States)

    Hook, W. R.

    1983-03-01

    Since the space station concept currently being developed by NASA calls for system updates and additions over a period of at least ten years following launch, attention must be given to the interfaces between station elements. Efforts have begun to develop generic fault detection, isolation, and correction techniques that could simplify on-orbit operations, maintenance and repair. An integrated hydrogen-oxygen system has been identified as the feature promising the greatest reduction in resupply costs. Scavenging excess fuel from the Space Shuttle's internal and external tanks, and using leftover Shuttle payload for fluid tankage, could supply hydrogen and oxygen for consumption in the form of propellants, fuel cell electricity, and life support gases. Advancements in cryogenic fluid management and storage technology are the keys to the design of this integrated system. Attention is given to the Interactive Design and Evaluation of Advanced Spacecraft computer-aided design and analysis system, which allows system engineers to study the integration problems presented by 40 technical modules.

  11. Complex matrix model duality

    International Nuclear Information System (INIS)

    Brown, T.W.

    2010-11-01

    The same complex matrix model calculates both tachyon scattering for the c=1 non-critical string at the self-dual radius and certain correlation functions of half-BPS operators in N=4 super- Yang-Mills. It is dual to another complex matrix model where the couplings of the first model are encoded in the Kontsevich-like variables of the second. The duality between the theories is mirrored by the duality of their Feynman diagrams. Analogously to the Hermitian Kontsevich- Penner model, the correlation functions of the second model can be written as sums over discrete points in subspaces of the moduli space of punctured Riemann surfaces. (orig.)

  12. Complex matrix model duality

    Energy Technology Data Exchange (ETDEWEB)

    Brown, T.W.

    2010-11-15

    The same complex matrix model calculates both tachyon scattering for the c=1 non-critical string at the self-dual radius and certain correlation functions of half-BPS operators in N=4 super- Yang-Mills. It is dual to another complex matrix model where the couplings of the first model are encoded in the Kontsevich-like variables of the second. The duality between the theories is mirrored by the duality of their Feynman diagrams. Analogously to the Hermitian Kontsevich- Penner model, the correlation functions of the second model can be written as sums over discrete points in subspaces of the moduli space of punctured Riemann surfaces. (orig.)

  13. A cross-sectional retrospective analysis of the regionalization of complex surgery.

    Science.gov (United States)

    Studnicki, James; Craver, Christopher; Blanchette, Christopher M; Fisher, John W; Shahbazi, Sara

    2014-08-16

    The Veterans Health Administration (VHA) system has assigned a surgical complexity level to each of its medical centers by specifying requirements to perform standard, intermediate or complex surgical procedures. No study to similarly describe the patterns of relative surgical complexity among a population of United States (U.S) civilian hospitals has been completed. single year, retrospective, cross-sectional. the study used Florida Inpatient Discharge Data from short-term acute hospitals for calendar year 2009. Two hundred hospitals with 2,542,920 discharges were organized into four quartiles (Q 1, 2, 3, 4) based on the number of complex procedures per hospital. The VHA surgical complexity matrix was applied to assign relative complexity to each procedure. The Clinical Classification Software (CCS) system assigned complex procedures to clinically meaningful groups. For outcome comparisons, propensity score matching methods adjusted for the surgical procedure, age, gender, race, comorbidities, mechanical ventilator use and type of admission. in-hospital mortality and length-of-stay (LOS). Only 5.2% of all inpatient discharges involve a complex procedure. The highest volume complex procedure hospitals (Q4) have 49.8% of all discharges but 70.1% of all complex procedures. In the 133,436 discharges with a primary complex procedure, 374 separate specific procedures are identified, only about one third of which are performed in the lowest volume complex procedure (Q1) hospitals. Complex operations of the digestive, respiratory, integumentary and musculoskeletal systems are the least concentrated and proportionately more likely to occur in the lower volume hospitals. Operations of the cardiovascular system and certain technology dependent miscellaneous diagnostic and therapeutic procedures are the most concentrated in high volume hospitals. Organ transplants are only done in Q4 hospitals. There were no significant differences in in-hospital mortality rates and the

  14. Engineering Process Monitoring for Control Room Operation

    OpenAIRE

    Bätz, M

    2001-01-01

    A major challenge in process operation is to reduce costs and increase system efficiency whereas the complexity of automated process engineering, control and monitoring systems increases continuously. To cope with this challenge the design, implementation and operation of process monitoring systems for control room operation have to be treated as an ensemble. This is only possible if the engineering of the monitoring information is focused on the production objective and is lead in close coll...

  15. Operational risk and e-banking

    Directory of Open Access Journals (Sweden)

    Şerbu, R.

    2010-12-01

    Full Text Available Banking involves a variety of risks. Under Basel II, the main risks are the monitored credit risk, market risk and operational risk. Frequently, operational risks are underestimated, considering that they would not affect the optimal activity of a bank. However, past experience of some credit institutions have shown that operational risk is an important cause of financial losses in the banking sector. Operational risk is generated by a complex of factors that manifests primarily as a result of direct customer interaction with the credit institution. In this context, the provision of e-banking services reduces direct contact with bank customers and thus reduces potential losses arising from operational risk. In sum, we consider it necessary to be aware of the link between operational risk and e-banking services promoted by banks and of the importance of this connection especially in a financial environment affected by the financial crisis.

  16. Chaos and complexity by design

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Daniel A. [Center for Theoretical Physics and Department of Physics,Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); School of Natural Sciences, Institute for Advanced Study,Princeton, NJ 08540 (United States); Yoshida, Beni [Perimeter Institute for Theoretical Physics,Waterloo, Ontario N2L 2Y5 (Canada)

    2017-04-20

    We study the relationship between quantum chaos and pseudorandomness by developing probes of unitary design. A natural probe of randomness is the “frame potential,” which is minimized by unitary k-designs and measures the 2-norm distance between the Haar random unitary ensemble and another ensemble. A natural probe of quantum chaos is out-of-time-order (OTO) four-point correlation functions. We show that the norm squared of a generalization of out-of-time-order 2k-point correlators is proportional to the kth frame potential, providing a quantitative connection between chaos and pseudorandomness. Additionally, we prove that these 2k-point correlators for Pauli operators completely determine the k-fold channel of an ensemble of unitary operators. Finally, we use a counting argument to obtain a lower bound on the quantum circuit complexity in terms of the frame potential. This provides a direct link between chaos, complexity, and randomness.

  17. Chaos and complexity by design

    International Nuclear Information System (INIS)

    Roberts, Daniel A.; Yoshida, Beni

    2017-01-01

    We study the relationship between quantum chaos and pseudorandomness by developing probes of unitary design. A natural probe of randomness is the “frame potential,” which is minimized by unitary k-designs and measures the 2-norm distance between the Haar random unitary ensemble and another ensemble. A natural probe of quantum chaos is out-of-time-order (OTO) four-point correlation functions. We show that the norm squared of a generalization of out-of-time-order 2k-point correlators is proportional to the kth frame potential, providing a quantitative connection between chaos and pseudorandomness. Additionally, we prove that these 2k-point correlators for Pauli operators completely determine the k-fold channel of an ensemble of unitary operators. Finally, we use a counting argument to obtain a lower bound on the quantum circuit complexity in terms of the frame potential. This provides a direct link between chaos, complexity, and randomness.

  18. Operative management and outcomes in 103 AAST-OIS grades IV and V complex hepatic injuries: trauma surgeons still need to operate, but angioembolization helps.

    Science.gov (United States)

    Asensio, Juan A; Roldán, Gustavo; Petrone, Patrizio; Rojo, Esther; Tillou, Areti; Kuncir, Eric; Demetriades, Demetrios; Velmahos, George; Murray, James; Shoemaker, William C; Berne, Thomas V; Chan, Linda

    2003-04-01

    American Association for the Surgery of Trauma (AAST) Organ Injury Scale (OIS) grades IV and V complex hepatic injuries are highly lethal. Our objectives were to review experience and identify predictors of outcome and to evaluate the role of angioembolization in decreasing mortality. This was a retrospective 8-year study of all patients sustaining AAST-OIS grades IV and V hepatic injuries managed operatively. Statistical analysis was performed using univariate and multivariate logistic regression. The main outcome measure was survival. The study included 103 patients, with a mean Revised Trauma Score of 5.61 +/- 2.55 and a mean Injury Severity Score of 33 +/- 9.5. Mechanism of injury was penetrating in 80 (79%) and blunt in 23 (21%). Emergency department thoracotomy was performed in 21 (25%). AAST grade IV injuries occurred in 51 (47%) and grade V injuries occurred in 52 (53%). Mean estimated blood loss was 9,414 mL. Overall survival was 43%. Adjusted overall survival rate after emergency department thoracotomy patients were excluded was 58%. Results stratified to AAST-OIS injury grade were as follows: grade IV, 32 of 51 (63%); grade V, 12 of 52 (23%); grade IV versus grade V (p Trauma Score (adjusted p hepatic veins (adjusted p hepatic injuries.

  19. Darfur: the various Missions of a complex conflict.

    Directory of Open Access Journals (Sweden)

    Wellington Pereira Carneiro

    2013-07-01

    Full Text Available The conflict in Darfur represents the worst humanitarian crisis of the new millennium and took place at an extremely introspective time in the UN when all aspects of the peace missions were reviewed and reassessed. Mainly upon release of the Brahimi report published in the year 2000, when the failures in Rwanda, Somalia and Bosnia were conducive to the reassessment of the exaggerated optimism from end of the cold war. However, the complexity of the Darfur conflict demanded again a massive deployment of resources and troops in complex and daring peace missions. This article explores the gradual return to complex operations, first by missions led by regional actors, like AMIS (African Union and EUFOR (European Union. In this context the complex and multifunctional missions led by the UN return, incorporating the protection of populations at risk, human rights and governance, among other components. That way the hybrid UNAMID and MINURCAT appear with ambitious mandates. The UNAMID has to operate along with the display of the International Criminal Court jurisdiction over an ongoing conflict which will entail new developments and challenges.

  20. Mission operations technology

    Science.gov (United States)

    Varsi, Giulio

    In the last decade, the operation of a spacecraft after launch has emerged as a major component of the total cost of the mission. This trend is sustained by the increasing complexity, flexibility, and data gathering capability of the space assets and by their greater reliability and consequent longevity. The trend can, however, be moderated by the progressive transfer of selected functions from the ground to the spacecraft and by application, on the ground, of new technology. Advances in ground operations derive from the introduction in the mission operations environment of advanced microprocessor-based workstations in the class of a few million instructions per second and from the selective application of artificial intelligence technology. In the last few years a number of these applications have been developed, tested in operational settings and successfully demonstrated to users. Some are now being integrated in mission operations facilities. An analysis of mission operations indicates that the key areas are: concurrent control of multiple missions; automated/interactive production of command sequences of high integrity at low cost; automated monitoring of spacecraft health and automated aides for fault diagnosis; automated allocation of resources; automated processing of science data; and high-fidelity, high-speed spacecraft simulation. Examples of major advances in selected areas are described.

  1. Spectral simplicity of apparent complexity. I. The nondiagonalizable metadynamics of prediction

    Science.gov (United States)

    Riechers, Paul M.; Crutchfield, James P.

    2018-03-01

    Virtually all questions that one can ask about the behavioral and structural complexity of a stochastic process reduce to a linear algebraic framing of a time evolution governed by an appropriate hidden-Markov process generator. Each type of question—correlation, predictability, predictive cost, observer synchronization, and the like—induces a distinct generator class. Answers are then functions of the class-appropriate transition dynamic. Unfortunately, these dynamics are generically nonnormal, nondiagonalizable, singular, and so on. Tractably analyzing these dynamics relies on adapting the recently introduced meromorphic functional calculus, which specifies the spectral decomposition of functions of nondiagonalizable linear operators, even when the function poles and zeros coincide with the operator's spectrum. Along the way, we establish special properties of the spectral projection operators that demonstrate how they capture the organization of subprocesses within a complex system. Circumventing the spurious infinities of alternative calculi, this leads in the sequel, Part II [P. M. Riechers and J. P. Crutchfield, Chaos 28, 033116 (2018)], to the first closed-form expressions for complexity measures, couched either in terms of the Drazin inverse (negative-one power of a singular operator) or the eigenvalues and projection operators of the appropriate transition dynamic.

  2. Self-organization scenario acting as physical basis of intelligent complex systems created in laboratory

    International Nuclear Information System (INIS)

    Lozneanu, Erzilia; Sanduloviciu, Mircea

    2006-01-01

    The recognition of limits in the tendency to miniaturize the so-called self-organizing devices inspired scientists to seek inspiration from living organisms that operate with functional elements that employ thermal energy exploiting quantum phenomena. Here we show how such operations are performed by a complex space charge configuration emerged by self-organization in plasma. Endowed with a special kind of memory, the complexity is able to ensure its survival in a metastable state performing the operations 'learned' during its emergence by self-organization. Possessing memory, the complexity works as an intelligent system able to evolve under suitable environmental conditions

  3. Introduction to the geometry of complex numbers

    CERN Document Server

    Deaux, Roland

    2008-01-01

    Geared toward readers unfamiliar with complex numbers, this text explains how to solve problems that frequently arise in the applied sciences and emphasizes constructions related to algebraic operations. 1956 edition.

  4. Complexity VIII. Ontology of closure in complex systems: The C* hypothesis and the O° notation

    Science.gov (United States)

    Chandler, Jerry LR

    1999-03-01

    Closure is a common characteristic of mathematical, natural and socio-cultural systems. Whether one is describing a graph, a molecule, a cell, a human, or a nation state, closure is implicitly understood. An objective of this paper is to continue a construction of a systematic framework for closure which is sufficient for future quantitative transdisciplinary investigations. A further objective is to extend the Birkhoff-von Neumann criterion for quantum systems to complex natural objects. The C* hypothesis is being constructed to be consistent with algebraic category theory (Ehresmann and Vanbremeersch, 1987, 1997, Chandler, 1990, 1991, Chandler, Ehresmann and Vanbremeersch, 1996). Five aspects of closure will be used to construct a framework for categories of complex systems: 1. Truth functions in mathematics and the natural sciences 2. Systematic descriptions in the mks and O° notations 3. Organizational structures in hierarchical scientific languages 4. Transitive organizational pathways in the causal structures of complex behaviors 5. Composing additive, multiplicative and exponential operations in complex systems Truth functions can be formal or objective or subjective, depending on the complexity of the system and on our capability to represent the fine structure of the system symbolically, observationally or descriptively. "Complete" material representations of the fine structure of a system may allow truth functions to be created over sets of one to one correspondences. Less complete descriptions can support less stringent truth functions based on coherence or subjective judgments. The role of human values in creating and perpetuating truth functions can be placed in context of the degree of fine structure in the system's description. The organization of complex systems are hypothesized to be categorizable into degrees relative to one another, thereby creating an ordering relationship. This ordering relationship is denoted by the symbols: O°1, O°2,O°3

  5. A Time-Composable Operating System for the Patmos Processor

    DEFF Research Database (Denmark)

    Ziccardi, Marco; Schoeberl, Martin; Vardanega, Tullio

    2015-01-01

    -composable operating system, on top of a time-composable processor, facilitates incremental development, which is highly desirable for industry. This paper makes a twofold contribution. First, we present enhancements to the Patmos processor to allow achieving time composability at the operating system level. Second......, we extend an existing time-composable operating system, TiCOS, to make best use of advanced Patmos hardware features in the pursuit of time composability.......In the last couple of decades we have witnessed a steady growth in the complexity and widespread of real-time systems. In order to master the rising complexity in the timing behaviour of those systems, rightful attention has been given to the development of time-predictable computer architectures...

  6. The operation of nuclear power plants

    International Nuclear Information System (INIS)

    Brosche, D.

    1992-01-01

    The duties to be performed in managing the operation of a nuclear power plant are highly diverse, as will be explained in this contribution by the examples of the Grafenrheinfeld Nuclear Power Station. The excellent safety record and the high availabilities of German nuclear power plants demonstrate that their operators have adopted the right approaches. Systematic evaluation of the operating experience accumulated inhouse and in other plants is of great significance in removing weak spots and improving operation. The manifold and complex activities in the structure of organization and of activities in a nuclear power plant require a high degree of division of labor. (orig.) [de

  7. The complexities of complex span: explaining individual differences in working memory in children and adults.

    Science.gov (United States)

    Bayliss, Donna M; Jarrold, Christopher; Gunn, Deborah M; Baddeley, Alan D

    2003-03-01

    Two studies are presented that investigated the constraints underlying working memory performance in children and adults. In each case, independent measures of processing efficiency and storage capacity are assessed to determine their relative importance in predicting performance on complex span tasks,which measure working memory capacity. Results show that complex span performance was independently constrained by individual differences in domain-general processing efficiency and domain-specific storage capacity. Residual variance, which may reflect the ability to coordinate storage and processing, also predicted academic achievement. These results challenge the view that complex span taps a limited-capacity resource pool shared between processing and storage operations. Rather, they are consistent with a multiple-component model in which separate resource pools support the processing and storage functions of working memory.

  8. Structured analysis and modeling of complex systems

    Science.gov (United States)

    Strome, David R.; Dalrymple, Mathieu A.

    1992-01-01

    The Aircrew Evaluation Sustained Operations Performance (AESOP) facility at Brooks AFB, Texas, combines the realism of an operational environment with the control of a research laboratory. In recent studies we collected extensive data from the Airborne Warning and Control Systems (AWACS) Weapons Directors subjected to high and low workload Defensive Counter Air Scenarios. A critical and complex task in this environment involves committing a friendly fighter against a hostile fighter. Structured Analysis and Design techniques and computer modeling systems were applied to this task as tools for analyzing subject performance and workload. This technology is being transferred to the Man-Systems Division of NASA Johnson Space Center for application to complex mission related tasks, such as manipulating the Shuttle grappler arm.

  9. Use of Special Operations Forces in United Nations Missions: a Method to Resolve Complexity

    Science.gov (United States)

    2015-05-21

    physical stamina and psychological stability, followed by a rigorous training program are the imperatives to create SOF soldiers.42 Mark Bowden in...recommendation is that the United Nations should establish a Special Operations planning cell within the UN Department of Peacekeeping Operations. As of...now, the cell is nonexistent. This cell should be able to facilitate the integration of SOF into the overall peace operations concept. Finally, the

  10. Weighted composition operators from Bergman-type spaces into ...

    Indian Academy of Sciences (India)

    Weighted composition operators from Bergman-type spaces into Bloch spaces and little. Bloch spaces are characterized by function theoretic properties of their inducing maps. Keywords. Weighted composition operator; Bergman-type space; Bloch space. 1. Introduction. Let D be the open unit disk in the complex plane C.

  11. Operations management approach to hospitals.

    Science.gov (United States)

    Harvey, J; Duguay, C R

    1988-06-01

    An operations management systems approach can be a useful tool for coordinating and planning in a complex organization. The authors argue for adapting such an approach to health care from the manufacturing industries in order to facilitate strategy formulation, communication and implementation.

  12. Modeling Operating Modes for the Monju Nuclear Power Plant

    DEFF Research Database (Denmark)

    Lind, Morten; Yoshikawa, Hidekazu; Jørgensen, Sten Bay

    2012-01-01

    The specification of supervision and control tasks in complex processes requires definition of plant states on various levels of abstraction related to plant operation in start-up, normal operation and shut-down. Modes of plant operation are often specified in relation to a plant decomposition in...... for the Japanese fast breeder reactor plant MONJU....

  13. Ship Block Transportation Scheduling Problem Based on Greedy Algorithm

    Directory of Open Access Journals (Sweden)

    Chong Wang

    2016-05-01

    Full Text Available Ship block transportation problems are crucial issues to address in reducing the construction cost and improving the productivity of shipyards. Shipyards aim to maximize the workload balance of transporters with time constraint such that all blocks should be transported during the planning horizon. This process leads to three types of penalty time: empty transporter travel time, delay time, and tardy time. This study aims to minimize the sum of the penalty time. First, this study presents the problem of ship block transportation with the generalization of the block transportation restriction on the multi-type transporter. Second, the problem is transformed into the classical traveling salesman problem and assignment problem through a reasonable model simplification and by adding a virtual node to the proposed directed graph. Then, a heuristic algorithm based on greedy algorithm is proposed to assign blocks to available transporters and sequencing blocks for each transporter simultaneously. Finally, the numerical experiment method is used to validate the model, and its result shows that the proposed algorithm is effective in realizing the efficient use of the transporters in shipyards. Numerical simulation results demonstrate the promising application of the proposed method to efficiently improve the utilization of transporters and to reduce the cost of ship block logistics for shipyards.

  14. Digital computer operation of a nuclear reactor

    International Nuclear Information System (INIS)

    Colley, R.W.

    1984-01-01

    A method is described for the safe operation of a complex system such as a nuclear reactor using a digital computer. The computer is supplied with a data base containing a list of the safe state of the reactor and a list of operating instructions for achieving a safe state when the actual state of the reactor does not correspond to a listed safe state, the computer selects operating instructions to return the reactor to a safe state

  15. PCA Fault Feature Extraction in Complex Electric Power Systems

    Directory of Open Access Journals (Sweden)

    ZHANG, J.

    2010-08-01

    Full Text Available Electric power system is one of the most complex artificial systems in the world. The complexity is determined by its characteristics about constitution, configuration, operation, organization, etc. The fault in electric power system cannot be completely avoided. When electric power system operates from normal state to failure or abnormal, its electric quantities (current, voltage and angles, etc. may change significantly. Our researches indicate that the variable with the biggest coefficient in principal component usually corresponds to the fault. Therefore, utilizing real-time measurements of phasor measurement unit, based on principal components analysis technology, we have extracted successfully the distinct features of fault component. Of course, because of the complexity of different types of faults in electric power system, there still exists enormous problems need a close and intensive study.

  16. Chirality sensing with stereodynamic copper(I) complexes.

    Science.gov (United States)

    De Los Santos, Zeus A; Legaux, Nicholas M; Wolf, Christian

    2017-11-01

    Three Cu(I) complexes derived from stereodynamic diphosphine ligands were synthesized and used for chirality sensing. The coordination of diamines and amino acids to these complexes generates distinct circular dichroism signals. The chiroptical sensor response allows determination of the absolute configuration and the enantiomeric excess of the analyte at low concentrations. This method is operationally simple, fast, and attractive for high-throughput sensing applications. © 2017 Wiley Periodicals, Inc.

  17. The floating desalination complex GEYSER-1

    International Nuclear Information System (INIS)

    Vorobyov, V.M.

    1997-01-01

    A conventional floating desalination complex, GEYSER-1, is presented which is capable of producing 40,000 cubic meters per day (m 3 /d) of fresh water from brackish water or seawater. The complex includes a water intake system, a preliminary water preparation system, a high-pressure pump house and a power installation based on diesel or a gas turbines with service equipment. GEYSER-1 can be transported to the place of operation either by a heavy lift ship or by towing. (author)

  18. COMPLEX CORONARY PATTERN AFFECTING THE SURGICAL OUTCOME OF ARTERIAL SWITCH OPERATION

    Directory of Open Access Journals (Sweden)

    Amit

    2015-12-01

    Full Text Available BACKGROUND Arterial switch operation (ASO has become the procedure of choice for the transposition of great arteries as well as for Taussig-Bing anomaly. Relocation of coronary arteries remains a technical problem in anatomic correction of the transposed great arteries. The present prospective study is designed to analyse the effect of coronary artery pattern on surgical outcome of arterial switch operation. METHOD From August 2014 to November 2015, total 60 patients underwent ASO. The patients are divided in three groups. Group-A 21 patients with d-TGA with intact ventricle septum (d-TGA intact IVS, in Group-B 33 patients d-TGA with ventricular septal defect (d-TGA, VSD, and in Group C 6 Taussig Bing anomaly. The coronary pattern and outcome is analyzed. RESULTS The overall mortality related to coronary pattern was 5%. The 2 patients died due to Intramural coronary artery leading to post-operative ventricular dysfunction, another patient with single retro pulmonary coronary artery died secondary to low coronary implant leading to kinking in coronary artery and myocardial dysfunction. On 12 monthly follow up, one of the Patients in group A had right pulmonary artery stenosis with gradient of 30 mm of Hg. Another patient in group B had supravalvular gradient of 20 mm of Hg. CONCLUSION The ASO for TGA and Taussig-Bing anomaly has low early and late mortality. However, the mortality is still seen in the patients with Intramural coronary artery and in the patient with single coronary artery with retro pulmonary course.

  19. Cognitive modeling and dynamic probabilistic simulation of operating crew response to complex system accidents

    International Nuclear Information System (INIS)

    Chang, Y.H.J.; Mosleh, A.

    2007-01-01

    This is the third in a series of five papers describing the IDAC (Information, Decision, and Action in Crew context) model for human reliability analysis. An example application of this modeling technique is also discussed in this series. The model is developed to probabilistically predict the responses of the nuclear power plant control room operating crew in accident conditions. The operator response spectrum includes cognitive, emotional, and physical activities during the course of an accident. This paper discusses the modeling components and their process rules. An operator's problem-solving process is divided into three types: information pre-processing (I), diagnosis and decision-making (D), and action execution (A). Explicit and context-dependent behavior rules for each type of operator are developed in the form of tables, and logical or mathematical relations. These regulate the process and activities of each of the three types of response. The behavior rules are developed for three generic types of operator: Decision Maker, Action Taker, and Consultant. This paper also provides a simple approach to calculating normalized probabilities of alternative behaviors given a context

  20. Crystal structure of the bacteriophage Qβ coat protein in complex with the RNA operator of the replicase gene.

    Science.gov (United States)

    Rumnieks, Janis; Tars, Kaspars

    2014-03-06

    The coat proteins of single-stranded RNA bacteriophages specifically recognize and bind to a hairpin structure in their genome at the beginning of the replicase gene. The interaction serves to repress the synthesis of the replicase enzyme late in infection and contributes to the specific encapsidation of phage RNA. While this mechanism is conserved throughout the Leviviridae family, the coat protein and operator sequences from different phages show remarkable variation, serving as prime examples for the co-evolution of protein and RNA structure. To better understand the protein-RNA interactions in this virus family, we have determined the three-dimensional structure of the coat protein from bacteriophage Qβ bound to its cognate translational operator. The RNA binding mode of Qβ coat protein shares several features with that of the widely studied phage MS2, but only one nucleotide base in the hairpin loop makes sequence-specific contacts with the protein. Unlike in other RNA phages, the Qβ coat protein does not utilize an adenine-recognition pocket for binding a bulged adenine base in the hairpin stem but instead uses a stacking interaction with a tyrosine side chain to accommodate the base. The extended loop between β strands E and F of Qβ coat protein makes contacts with the lower part of the RNA stem, explaining the greater length dependence of the RNA helix for optimal binding to the protein. Consequently, the complex structure allows the proposal of a mechanism by which the Qβ coat protein recognizes and discriminates in favor of its cognate RNA. © 2013.

  1. The electrostatic role of the Zn-Cys2His2 complex in binding of operator DNA with transcription factors: mouse EGR-1 from the Cys2His2 family.

    Science.gov (United States)

    Chirgadze, Y N; Boshkova, E A; Polozov, R V; Sivozhelezov, V S; Dzyabchenko, A V; Kuzminsky, M B; Stepanenko, V A; Ivanov, V V

    2018-01-07

    The mouse factor Zif268, known also as early growth response protein EGR-1, is a classical representative for the Cys2His2 transcription factor family. It is required for binding the RNA polymerase with operator dsDNA to initialize the transcription process. We have shown that only in this family of total six Zn-finger protein families the Zn complex plays a significant role in the protein-DNA binding. Electrostatic feature of this complex in the binding of factor Zif268 from Mus musculus with operator DNA has been considered. The factor consists of three similar Zn-finger units which bind with triplets of coding DNA. Essential contacts of the factor with the DNA phosphates are formed by three conservative His residues, one in each finger. We describe here the results of calculations of the electrostatic potentials for the Zn-Cys2His2 complex, Zn-finger unit 1, and the whole transcription factor. The potential of Zif268 has a positive area on the factor surface, and it corresponds exactly to the binding sites of each of Zn-finger units. The main part of these areas is determined by conservative His residues, which form contacts with the DNA phosphate groups. Our result shows that the electrostatic positive potential of this histidine residue is enhanced due to the Zn complex. The other contacts of the Zn-finger with DNA are related to nucleotide bases, and they are responsible for the sequence-specific binding with DNA. This result may be extended to all other members of the Cys2His2 transcription factor family.

  2. Simulation of beamline alignment operations

    International Nuclear Information System (INIS)

    Annese, C; Miller, M G.

    1999-01-01

    The CORBA-based Simulator was a Laboratory Directed Research and Development (LDRD) project that applied simulation techniques to explore critical questions about distributed control systems. The simulator project used a three-prong approach that studied object-oriented distribution tools, computer network modeling, and simulation of key control system scenarios. The National Ignition Facility's (NIF) optical alignment system was modeled to study control system operations. The alignment of NIF's 192 beamlines is a large complex operation involving more than 100 computer systems and 8000 mechanized devices. The alignment process is defined by a detailed set of procedures; however, many of the steps are deterministic. The alignment steps for a poorly aligned component are similar to that of a nearly aligned component; however, additional operations/iterations are required to complete the process. Thus, the same alignment operations will require variable amounts of time to perform depending on the current alignment condition as well as other factors. Simulation of the alignment process is necessary to understand beamline alignment time requirements and how shared resources such as the Output Sensor and Target Alignment Sensor effect alignment efficiency. The simulation has provided alignment time estimates and other results based on documented alignment procedures and alignment experience gained in the laboratory. Computer communication time, mechanical hardware actuation times, image processing algorithm execution times, etc. have been experimentally determined and incorporated into the model. Previous analysis of alignment operations utilized average implementation times for all alignment operations. Resource sharing becomes rather simple to model when only average values are used. The time required to actually implement the many individual alignment operations will be quite dynamic. The simulation model estimates the time to complete an operation using

  3. Solution of problems of automation of elevator complex

    Directory of Open Access Journals (Sweden)

    V. S. Kudryashov

    2018-01-01

    Full Text Available The article is devoted to the solution of automation tasks in the development of the operator's workstation (AWP for controlling the elevator with a capacity of 280 tons per hour as part of the work of LLC "Intelligent Automation Complexes". In the existing elevator complexes, only grain transportation is provided (there are no control systems with automatic grain drying with high accuracy of humidity measurement, automatic generation of grain transportation routes is not provided (for each route, a technical task is required and changes to the control program of the system are required. At the same time, more precise regulation of the flow of grain flows is required (the automatic latches used have only the "open / close" positions. The goal of elevator automation is: to reduce the time of equipment downturn by tracking the operating time of the equipment, the number of accidents and informing the operator about equipment that is susceptible to failure; reduction of the time for setting up and servicing the elevator; improvement of product quality; a decrease in the percentage of rejects, as well as a decrease in the influence of the human factor on the process. The paper provides a brief description of the proposed gate valve control algorithms, the auto-building of the grain drying route, the filtering of the grain moisture readings and the fragments of the operator's workstation program (in indusoft web studio for controlling the elevator complex. The proposed solutions allow: to reduce the time of equipment downtime by 20% and the total service time of the complex; weed out the undried grain for ridding in automatic mode for repeated drying; to improve the quality of products through automatic control of grain overheating; to reduce the production waste by 3%, and also to reduce the influence of the human factor on the process of grain transportation and drying.

  4. Catastrophic failure in complex socio-technical systems

    International Nuclear Information System (INIS)

    Weir, D.

    2004-01-01

    This paper reviews the sequences leading to catastrophic failures in complex socio-technical systems. It traces some of the elements of an analytic framework to that proposed by Beer in Decision and Control, first published in 1966, and argues that these ideas are centrally relevant to a topic on which research interest has developed subsequently, the study of crises, catastrophes and disasters in complex socio-technical systems in high technology sectors. But while the system perspective is central, it is not by itself entirely adequate. The problems discussed cannot be discussed simply in terms of system parameters like variety, redundancy and complexity. Much empirical research supports the view that these systems typically operate in degraded mode. The degradations may be primarily initiated within the social components of the socio-technical system. Such variables as hierarchical position, actors' motivations and intentions are relevant to explain the ways in which communication systems typically operate to filter out messages from lower participants and to ignore the 'soft signals' issuing from small-scale and intermittent malfunctions. (author)

  5. The Marketing Firm: Operant Interpretation of Corporate Behavior

    Science.gov (United States)

    Vella, Kevin J.; Foxall, Gordon R.

    2013-01-01

    In this article we address the issue of applying operant psychology to derive plausible and useful interpretations of complex firm behavior in natural settings. The objective is to discuss an appropriate methodology based on case study design, developed specifically in Vella and Foxall (2011), to produce an operant interpretation of secondary…

  6. Sutherland models for complex reflection groups

    International Nuclear Information System (INIS)

    Crampe, N.; Young, C.A.S.

    2008-01-01

    There are known to be integrable Sutherland models associated to every real root system, or, which is almost equivalent, to every real reflection group. Real reflection groups are special cases of complex reflection groups. In this paper we associate certain integrable Sutherland models to the classical family of complex reflection groups. Internal degrees of freedom are introduced, defining dynamical spin chains, and the freezing limit taken to obtain static chains of Haldane-Shastry type. By considering the relation of these models to the usual BC N case, we are led to systems with both real and complex reflection groups as symmetries. We demonstrate their integrability by means of new Dunkl operators, associated to wreath products of dihedral groups

  7. Korean Conference on Several Complex Variables

    CERN Document Server

    Byun, Jisoo; Gaussier, Hervé; Hirachi, Kengo; Kim, Kang-Tae; Shcherbina, Nikolay

    2015-01-01

    This volume includes 28 chapters by authors who are leading researchers of the world describing many of the up-to-date aspects in the field of several complex variables (SCV). These contributions are based upon their presentations at the 10th Korean Conference on Several Complex Variables (KSCV10), held as a satellite conference to the International Congress of Mathematicians (ICM) 2014 in Seoul, Korea. SCV has been the term for multidimensional complex analysis, one of the central research areas in mathematics. Studies over time have revealed a variety of rich, intriguing, new knowledge in complex analysis and geometry of analytic spaces and holomorphic functions which were "hidden" in the case of complex dimension one. These new theories have significant intersections with algebraic geometry, differential geometry, partial differential equations, dynamics, functional analysis and operator theory, and sheaves and cohomology, as well as the traditional analysis of holomorphic functions in all dimensions. This...

  8. The Design of a Capability-Based Distributed Operating System

    NARCIS (Netherlands)

    Mullender, Sape J.; Tanenbaum, A.S.

    Fifth-generation computer systems will use large numbers of processors to achieve high performance. In this paper a capability-based operating system designed for this environment is discussed. Capability-based operating systems have traditionally required large, complex kernels to manage the use of

  9. New complex-dryers with RE for coatings

    International Nuclear Information System (INIS)

    Ge, G.

    1998-01-01

    Full text: The complex coating dryers are produced with good 2-Ethylhexanoic acid, rare earths and other metals. Simply using such a complex drier can get the total effect instead of the traditional dryers such as Co, Mn, Pb, Zn, Ca etc. It has advantages of saving quantity, decreasing cost, simplifying process, making the operation convenient, good quality, good stability and without Pb. Invention patent of China requisition number is 95119867.X

  10. Noncommutative analysis, operator theory and applications

    CERN Document Server

    Cipriani, Fabio; Colombo, Fabrizio; Guido, Daniele; Sabadini, Irene; Sauvageot, Jean-Luc

    2016-01-01

    This book illustrates several aspects of the current research activity in operator theory, operator algebras and applications in various areas of mathematics and mathematical physics. It is addressed to specialists but also to graduate students in several fields including global analysis, Schur analysis, complex analysis, C*-algebras, noncommutative geometry, operator algebras, operator theory and their applications. Contributors: F. Arici, S. Bernstein, V. Bolotnikov, J. Bourgain, P. Cerejeiras, F. Cipriani, F. Colombo, F. D'Andrea, G. Dell'Antonio, M. Elin, U. Franz, D. Guido, T. Isola, A. Kula, L.E. Labuschagne, G. Landi, W.A. Majewski, I. Sabadini, J.-L. Sauvageot, D. Shoikhet, A. Skalski, H. de Snoo, D. C. Struppa, N. Vieira, D.V. Voiculescu, and H. Woracek.

  11. Norms of certain Jordan elementary operators

    Science.gov (United States)

    Zhang, Xiaoli; Ji, Guoxing

    2008-10-01

    Let be a complex Hilbert space and let denote the algebra of all bounded linear operators on . For , the Jordan elementary operator UA,B is defined by UA,B(X)=AXB+BXA, . In this short note, we discuss the norm of UA,B. We show that if and ||UA,B||=||A||||B||, then either AB* or B*A is 0. We give some examples of Jordan elementary operators UA,B such that ||UA,B||=||A||||B|| but AB*[not equal to]0 and B*A[not equal to]0, which answer negatively a question posed by M. Boumazgour in [M. Boumazgour, Norm inequalities for sums of two basic elementary operators, J. Math. Anal. Appl. 342 (2008) 386-393].

  12. DEMONSTRATION OF ELECTROCHEMICAL REMEDIATION TECHNOLOGIES-INDUCED COMPLEXATION

    Energy Technology Data Exchange (ETDEWEB)

    Barry L. Burks

    2002-12-01

    The Project Team is submitting this Topical Report on the results of its bench-scale demonstration of ElectroChemical Remediation Technologies (ECRTs) and in particular the Induced Complexation (ECRTs-IC) process for remediation of mercury contaminated soils at DOE Complex sites. ECRTs is an innovative, in-situ, geophysically based soil remediation technology with over 50 successful commercial site applications involving remediation of over two million metric tons of contaminated soils. ECRTs-IC has been successfully used to remediate 220 cu m of mercury-contaminated sediments in the Union Canal, Scotland. In that operation, ECRTs-IC reduced sediment total mercury levels from an average of 243 mg/kg to 6 mg/kg in 26 days of operation. The clean up objective was to achieve an average total mercury level in the sediment of 20 mg/kg.

  13. 76 FR 80385 - Draft Environmental Impact Statement and Proposed Maricopa Sun Solar Complex Multi-Species...

    Science.gov (United States)

    2011-12-23

    .... Operation related activities could include solar panel maintenance, on-site parking, operation of solar...-FXES11120800000F2-123] Draft Environmental Impact Statement and Proposed Maricopa Sun Solar Complex Multi-Species... National Environmental Policy Act for the proposed Maricopa Sun Solar Complex Habitat Conservation Plan...

  14. Advances in real and complex analysis with applications

    CERN Document Server

    Cho, Yeol; Agarwal, Praveen; Area, Iván

    2017-01-01

    This book discusses a variety of topics in mathematics and engineering as well as their applications, clearly explaining the mathematical concepts in the simplest possible way and illustrating them with a number of solved examples. The topics include real and complex analysis, special functions and analytic number theory, q-series, Ramanujan’s mathematics, fractional calculus, Clifford and harmonic analysis, graph theory, complex analysis, complex dynamical systems, complex function spaces and operator theory, geometric analysis of complex manifolds, geometric function theory, Riemannian surfaces, Teichmüller spaces and Kleinian groups, engineering applications of complex analytic methods, nonlinear analysis, inequality theory, potential theory, partial differential equations, numerical analysis , fixed-point theory, variational inequality, equilibrium problems, optimization problems, stability of functional equations, and mathematical physics.  It includes papers presented at the 24th International Confe...

  15. The VEPP-2000 Collider Control System: Operational Experience

    CERN Document Server

    Senchenko, A I; Lysenko, A P; Rogovsky, Yu A; Shatunov, P Yu

    2017-01-01

    The VEPP-2000 collider was commissioned and operated successfully in 2010-2013. During the operation the facility underwent continuous updates and experience in maintenance was acquired. Strong cooperation between the staff of the accelerator complex and the developers of the control system proved effective for implementing the necessary changes in a short time.

  16. Low Complexity List Decoding for Polar Codes with Multiple CRC Codes

    Directory of Open Access Journals (Sweden)

    Jong-Hwan Kim

    2017-04-01

    Full Text Available Polar codes are the first family of error correcting codes that provably achieve the capacity of symmetric binary-input discrete memoryless channels with low complexity. Since the development of polar codes, there have been many studies to improve their finite-length performance. As a result, polar codes are now adopted as a channel code for the control channel of 5G new radio of the 3rd generation partnership project. However, the decoder implementation is one of the big practical problems and low complexity decoding has been studied. This paper addresses a low complexity successive cancellation list decoding for polar codes utilizing multiple cyclic redundancy check (CRC codes. While some research uses multiple CRC codes to reduce memory and time complexity, we consider the operational complexity of decoding, and reduce it by optimizing CRC positions in combination with a modified decoding operation. Resultingly, the proposed scheme obtains not only complexity reduction from early stopping of decoding, but also additional reduction from the reduced number of decoding paths.

  17. Autonomous Operations System: Development and Application

    Science.gov (United States)

    Toro Medina, Jaime A.; Wilkins, Kim N.; Walker, Mark; Stahl, Gerald M.

    2016-01-01

    Autonomous control systems provides the ability of self-governance beyond the conventional control system. As the complexity of mechanical and electrical systems increases, there develops a natural drive for developing robust control systems to manage complicated operations. By closing the bridge between conventional automated systems to knowledge based self-awareness systems, nominal control of operations can evolve into relying on safe critical mitigation processes to support any off-nominal behavior. Current research and development efforts lead by the Autonomous Propellant Loading (APL) group at NASA Kennedy Space Center aims to improve cryogenic propellant transfer operations by developing an automated control and health monitoring system. As an integrated systems, the center aims to produce an Autonomous Operations System (AOS) capable of integrating health management operations with automated control to produce a fully autonomous system.

  18. Features of complex networks in a free-software operating system

    International Nuclear Information System (INIS)

    Nair, Rajiv; Nagarjuna, G; Ray, Arnab K

    2012-01-01

    We propose a mathematical model to fit the degree distribution of directed dependency networks in free and open-source software. In this complex system, the intermediate scales of both the in-directed and out-directed dependency networks follow a power-law trend (specifically Zipf's law). Deviations from this feature are found both for the highly linked nodes, and the poorly linked nodes. This is due to finite-size effects in the networks, and the parameters needed to model finite-size behaviour make a quantitative distinction between the in-directed and out-directed networks. We also provide a model to describe the dynamic evolution of the network, and account for its saturation in the long-time limit.

  19. A dynamic simulation model of the Savannah River Site high level waste complex

    International Nuclear Information System (INIS)

    Gregory, M.V.; Aull, J.E.; Dimenna, R.A.

    1994-01-01

    A detailed, dynamic simulation entire high level radioactive waste complex at the Savannah River Site has been developed using SPEEDUP(tm) software. The model represents mass transfer, evaporation, precipitation, sludge washing, effluent treatment, and vitrification unit operation processes through the solution of 7800 coupled differential and algebraic equations. Twenty-seven discrete chemical constituents are tracked through the unit operations. The simultaneous simultaneous simulation of concurrent batch and continuous processes is achieved by several novel, customized SPEEDUP(tm) algorithms. Due to the model's computational burden, a high-end work station is required: simulation of a years operation of the complex requires approximately three CPU hours on an IBM RS/6000 Model 590 processor. The model will be used to develop optimal high level waste (HLW) processing strategies over a thirty year time horizon. It will be employed to better understand the dynamic inter-relationships between different HLW unit operations, and to suggest strategies that will maximize available working tank space during the early years of operation and minimize overall waste processing cost over the long-term history of the complex. Model validation runs are currently underway with comparisons against actual plant operating data providing an excellent match

  20. Mesothelioma in Qingdao, PRC (2000 - 2007)

    Science.gov (United States)

    Frank, Arthur L.; Zengchang, Pang; Huaqiang, Zhang; Yun, Zhang

    2009-02-01

    The city of Qingdao, PRC has been the site of two asbestos product facilities that operated for almost fifty years, as well as a shipyard. Because of a new computerized data collection system for death certificates, almost all 48,000 yearly deaths from a population base of 7.5 million are now recorded with cause of death and "usual occupation". All mesothelioma deaths from 2000 through 2007 are reviewed and the unusual finding is that of a predominance of cases in females. The issues of competing causes of death and potential underreporting are discussed.

  1. Operational air sampling report, July--December 1991

    International Nuclear Information System (INIS)

    Lyons, C.L.

    1992-11-01

    Air sampling is one of the more useful ways of assessing the effectiveness of operational radiation safety programs at the Nevada Test Site (NTS). Air sampling programs document NTS airborne radionuclide concentrations in various work locations and environments. These concentrations generally remain well below the Derived Air Concentration (DAC) values prescribed by the Department of Energy (DOE 5480.11, Attachment 1) or the Derived Concentration Guide (DCG) values prescribed by the Department of Energy DOE 5400.5, Chapter Ill. The Defense Nuclear Agency (DNA) tunnel complexes, Area 12 Test Support Compound and the Area 6 Decontamination Pad and Laundry air sampling programs are summarized in this report. Evaluations are based on Analytical Services Department (ASD) Counting Laboratory analyses and Health Protection Department (HPD)/Radiological Field Operations Section (RFOS) radiation protection technician's (RPT) or health physicists' calculations for air samples collected July 1 through December 31, 1991. Of the NTS operational air sampling programs in the tunnel complexes, the initial mining and event reentry and recovery operations represent the only real airborne radioactive inhalation potentials to personnel. Monthly filter and scintillation cell samples were taken and counted in RDA-200 Radon Detectors to document working levels of radon/thoron daughters and picocurie/liter (PCVL) concentrations of radon gas. Weekly Drierite samples for tritium analysis were taken in the active tunnel complexes to document any changes in normal background levels or reentry drifts as they are advanced toward ground zero (GZ) areas. Underground water sources are considered primary transporters of tritium from old event areas

  2. On the spectrum of elementary type operator

    International Nuclear Information System (INIS)

    Khan, G.A.; Kyle, J.

    1990-11-01

    Let H be a complex separable Hilbert space and let B(H) be the algebra of all bounded linear operators on H. Let {A 1 ,...,A n } and {B 1 ,...,B n } be two commuting families of self-adjoint operators in B(H). In this paper we are concerned with the investigation of the spectrum of the elementary type operator Γ : B(H) → B(H) defined by Γ(X) = Σ n i=1 A i XB i for all X in B(H). 8 refs

  3. Technological challenges in the retrieval of spent fuel from storage in sea vessels

    International Nuclear Information System (INIS)

    Egorov, N.N.; Ershov, V.N.; Tohernaenko, L.M.; Yanovskaya, N.S.; Barskov, M.K.; Grigorov, S.I.

    1999-01-01

    As discussed in this presentation, the decommissioning of scrapped nuclear vessels in Russia has been too fast for the existing waste management plants to keep pace with. Existing facilities were designed to service the fleet in operation and are filled up. The development of new infrastructure for handling radioactive waste and spent nuclear fuel is impeded by the lack of financial means. A large number of nuclear submarines are now laid up with the nuclear fuel still loaded, but the President and the Government have decided to speed up unloading of the spent fuel. The bottleneck is the discharge of the spent nuclear fuel. The Navy has three floating storage facilities for the purpose. The Navy performs many technological decommissioning operations that would have been more appropriately left for shipyards and specialised civil industrial enterprises. Coastal discharge plants at larger shipyards are planned on the North and the Pacific regions of Russia. These are built with US support. The containers used for transport to the Mayak storage are discussed. A metal-concrete container programme is executed in co-operation with Norway and the US. Mayak does not have the capacity for long-term storage of spent nuclear fuel. A temporary storage facility at Mayak has been designed by a consortium of enterprises from Norway, Sweden, UK and France. Lepse, a service-ship for the nuclear icebreaker fleet, was laid up in 1990. It contains spent nuclear fuel assemblies in such bad condition that they cannot easily be discharged. There is an international project for decommissioning Lepse. The Russians consider this a pilot project. The problems of the civil nuclear fleet are similar to those of the Navy

  4. Model Based Autonomy for Robust Mars Operations

    Science.gov (United States)

    Kurien, James A.; Nayak, P. Pandurang; Williams, Brian C.; Lau, Sonie (Technical Monitor)

    1998-01-01

    Space missions have historically relied upon a large ground staff, numbering in the hundreds for complex missions, to maintain routine operations. When an anomaly occurs, this small army of engineers attempts to identify and work around the problem. A piloted Mars mission, with its multiyear duration, cost pressures, half-hour communication delays and two-week blackouts cannot be closely controlled by a battalion of engineers on Earth. Flight crew involvement in routine system operations must also be minimized to maximize science return. It also may be unrealistic to require the crew have the expertise in each mission subsystem needed to diagnose a system failure and effect a timely repair, as engineers did for Apollo 13. Enter model-based autonomy, which allows complex systems to autonomously maintain operation despite failures or anomalous conditions, contributing to safe, robust, and minimally supervised operation of spacecraft, life support, In Situ Resource Utilization (ISRU) and power systems. Autonomous reasoning is central to the approach. A reasoning algorithm uses a logical or mathematical model of a system to infer how to operate the system, diagnose failures and generate appropriate behavior to repair or reconfigure the system in response. The 'plug and play' nature of the models enables low cost development of autonomy for multiple platforms. Declarative, reusable models capture relevant aspects of the behavior of simple devices (e.g. valves or thrusters). Reasoning algorithms combine device models to create a model of the system-wide interactions and behavior of a complex, unique artifact such as a spacecraft. Rather than requiring engineers to all possible interactions and failures at design time or perform analysis during the mission, the reasoning engine generates the appropriate response to the current situation, taking into account its system-wide knowledge, the current state, and even sensor failures or unexpected behavior.

  5. On operator diagnosis aid in severe earthquakes

    International Nuclear Information System (INIS)

    Lee, S.H.; Okrent, D.

    1988-01-01

    During a severe earthquake, any component, system, or structure may fail; the plant may be driven into a very complex situation in which instrumentaion and control systems may also fail and provide operators with unreliable information about the processing parameters crucial to plant safety. What can operators do when faced with such complexity. Even though the likelihood of such a severe earthquake may be very low, its consequence may be more serious if mitigative measures are not thought out and implemented in advance. The objectives of the present study is related to the measures to protect the plant from severe damage due to large earthquakes, namely, the improvement of operator capability to respond to seismic damage through the use of Emergency Procedure Guidelines (EPGs). The fact that the symptoms presented to operators may be unreliable in severe earthquakes endangers the validity of actions in EPGs. It is the purpose of this study to design a tool through which study may be done so that the weakness of EPGs may be identified in advance then, if possible, according to the practice results some learning may be obtained so that EPGs may be improved to accomodate the complexity to a maximum. In other words, the present study intends to provide a tool which may simulate available signals, including false ones, such that EPGs may be examined and operator actions may be studied. It is hoped to develop some knowledge needed to complement the currently available knowledge. The final product of this study shall be a program which may provide users the rationale on how it reachs conclusions such that users may improve their knowledge, as well as a program whose knowledge may be updated via user interfacing

  6. Nuclear floating power desalination complexes

    International Nuclear Information System (INIS)

    Panov, Y.K.; Polunichev, V.I.; Zverev, K.V.

    1998-01-01

    Russia is a single country in the world which possesses a powerful ice-breaker transport fleet that allows a solution of important social-economic tasks of the country's northern regions by maintaining a year-round navigation along the Arctic sea route. A total operating record of the marine nuclear reactors up until till now exceeds 150 reactor-years, with their main equipment operating life reacting 120 thousand hours. Design and constructional progresses have been made continuously during forty years of nuclear-powered ships construction in Russia. Well proven technology of all components experienced in the marine nuclear reactors give grounds to recommend marine NSSSs of KLT-40 type as energy sources for the heat and power co-generation plants and the sea water desalination complexes, particularly as a floating installation. Co-generation stations are considered for deployment in the extreme Northern Region of Russia. Nuclear floating desalination complexes can be used for drinkable water production in the coastal regions of Northern Africa, the Near East, India etc. (author)

  7. INFLUENCE OF COMPLEXITY ON THE MARGINAL LOGISTICAL COSTS

    Directory of Open Access Journals (Sweden)

    Juraj DUBOVEC

    2013-12-01

    Full Text Available In the article is described the influence of complexity on the logistical operations. Ideal example is the exchange of storage in the system "kanban", which has complexity equal one. Clients directed production increases the consumption of time in logistics within manipulation with critical parts, when the ratio isn't equal to multiple capacity relevant storage. Economical consequence is the increase of costs.

  8. Alertness management : strategic naps in operational settings

    Science.gov (United States)

    1995-01-01

    Managing fatigue in complex operational settings requires attention to multiple factors, including hours of service, scheduling, education and training, countermeasures, technology, and research. Alertness-management strategies can be used to promote...

  9. What are good operators and why are they needed?

    International Nuclear Information System (INIS)

    Clay, M.E.

    1992-01-01

    Sophisticated computer control and automation have made possible the operation of today's enormously complex particle physics facilities. Yet with all of the versatility that this sophisticated technology provides, it would be difficult, if not impossible, for these facilities to attain even minimum required operational goals without the constant supervision and regular intervention of human operators. Furthermore, if operational goals are to be pushed to new limits, then human operators with rare, esoteric talents and skills, commonly referred to as good operators, are required. The need for these operators, together with a discussion of the qualities associated with good operators, are the subjects of this paper

  10. The STAR concept, systems to assist the operator during abnormal events

    International Nuclear Information System (INIS)

    Felkel, L.

    1984-01-01

    Man-machine-communication in electrical power plants is increasingly based on the capabilities of minicomputers. Rather than just displaying raw process data more complex processing is done to aid operators by improving information quality. Advanced operator aids for nuclear power plants are e.g. alarm reduction, disturbance analysis and expert systems. Operator aids use complex combinations and computations of plant signals, which have to be described in a formal and homogeneous way. The design of such computer-based information systems requires extensive software and engineering efforts. The STAR software concept described in this paper, however, reduces the software effort to a minimum by providing an advanced program package which facilitates specification and implementation of engineering know-how necessary for sophisticated operator aids. (orig.)

  11. Effects of operational parameters on dark fermentative hydrogen production from biodegradable complex waste biomass.

    Science.gov (United States)

    Ghimire, Anish; Sposito, Fabio; Frunzo, Luigi; Trably, Eric; Escudié, Renaud; Pirozzi, Francesco; Lens, Piet N L; Esposito, Giovanni

    2016-04-01

    This work aimed to investigate the effect of the initial pH, combination of food to microorganism ratio (F/M) and initial pH, substrate pre-treatment and different inoculum sources on the dark fermentative biohydrogen (H2) yields. Three model complex waste biomasses (food waste, olive mill wastewater (OMWW) and rice straw) were used to assess the effect of the aforementioned parameters. The effect of the initial pH between 4.5 and 7.0 was investigated in batch tests carried out with food waste. The highest H2 yields were shown at initial pH 4.5 (60.6 ± 9.0 mL H2/g VS) and pH 5.0 (50.7 ± 0.8 mL H2/g VS). Furthermore, tests carried out with F/M ratios of 0.5, 1.0 and 1.5 at initial pH 5.0 and 6.5 revealed that a lower F/M ratio (0.5 and 1.0) favored the H2 production at an initial pH 5.0 compared to pH 6.5. Alkaline pre-treatment of raw rice straw using 4% and 8% NaOH at 55°C for 24h, increased the H2 yield by 26 and 57-fold, respectively. In the dark fermentation of OMWW, the H2 yield was doubled when heat-shock pre-treated activated sludge was used as inoculum in comparison to anaerobic sludge. Overall, this study shows that the application of different operating parameters to maximize the H2 yields strongly depends on the biodegradability of the substrate. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. From US NAVY Mate to Division Leader for Operations - Requirements, Development and Career Paths of LANL/LANSCE Accelerator Operators

    International Nuclear Information System (INIS)

    Spickermann, Thomas

    2012-01-01

    There are opportunities for advancement within the team. Operators advance by: (1) Becoming fully qualified - following the LANSCE Accelerator Operator Training Manual, Operator trainees go through 5 levels of qualification, from Radiation Security System to Experimental Area Operator. Must obtain Knowledge and Performance checkouts by an OSS or AOSS, and an End-of-Card checkout by the team leader or RSS engineer (level I). Program was inspired by US NAVY qualification program for nuclear reactor operators. Time to complete: 2-2.5 years. (2) Fully qualified operators are eligible to apply for vacant (OSS)/AOSS positions; and (3) Alternatively, experienced operators can sign up for the voluntary Senior Operator Qualification Program. They must demonstrate in-depth knowledge of all areas of the accelerator complex. Time to complete is 2-3 years (Minimum 4 years from fully qualified). Eligible for promotion to level between qualified operator and AOSS.

  13. Human factors in operational maintenance on future naval vessels

    NARCIS (Netherlands)

    Post, W.M.; Schreurs, J.C.; Rakhorst-Oudendijk, M.L.W.; Badon Ghijben, N.A.; Diggelen, J. van

    2014-01-01

    The increasing complexity of operational maintenance on naval platforms and the need to sustain this also in battle conditions are in conflict with the requirement for crew reduction. This asks for a new approach. The Netherlands MoD knows how to develop technical solutions for operational

  14. Test, Control and Monitor System (TCMS) operations plan

    Science.gov (United States)

    Macfarlane, C. K.; Conroy, M. P.

    1993-01-01

    The purpose is to provide a clear understanding of the Test, Control and Monitor System (TCMS) operating environment and to describe the method of operations for TCMS. TCMS is a complex and sophisticated checkout system focused on support of the Space Station Freedom Program (SSFP) and related activities. An understanding of the TCMS operating environment is provided and operational responsibilities are defined. NASA and the Payload Ground Operations Contractor (PGOC) will use it as a guide to manage the operation of the TCMS computer systems and associated networks and workstations. All TCMS operational functions are examined. Other plans and detailed operating procedures relating to an individual operational function are referenced within this plan. This plan augments existing Technical Support Management Directives (TSMD's), Standard Practices, and other management documentation which will be followed where applicable.

  15. The characterization of secondary lithium-ion battery degradation when operating complex, ultra-high power pulsed loads

    Science.gov (United States)

    Wong, Derek N.

    The US Navy is actively developing all electric fleets, raising serious questions about what is required of onboard power supplies in order to properly power the ship's electrical systems. This is especially relevant when choosing a viable power source to drive high power propulsion and electric weapon systems in addition to the conventional loads deployed aboard these types of vessels. Especially when high pulsed power loads are supplied, the issue of maintaining power quality becomes important and increasingly complex. Conventionally, a vessel's electrical power is generated using gas turbine or diesel driven motor-generator sets that are very inefficient when they are used outside of their most efficient load condition. What this means is that if the generator is not being utilized continuously at its most efficient load capacity, the quality of the output power may also be effected and fall outside of the acceptable power quality limits imposed through military standards. As a solution to this potential problem, the Navy has proposed using electrochemical storage devices since they are able to buffer conventional generators when the load is operating below the generator's most efficient power level or able to efficiently augment a generator when the load is operating in excess of the generator's most efficient power rating. Specifically, the US Navy is interested in using commercial off-the-shelf (COTS) lithium-ion batteries within an intelligently controlled energy storage module that could act as either a prime power supply for on-board pulsed power systems or as a backup generator to other shipboard power systems. Due to the unique load profile of high-rate pulsed power systems, the implementation of lithium-ion batteries within these complex systems requires them to be operated at very high rates and the effects these things have on cell degradation has been an area of focus. There is very little published research into the effects that high power transient

  16. ANS main control complex three-dimensional computer model development

    International Nuclear Information System (INIS)

    Cleaves, J.E.; Fletcher, W.M.

    1993-01-01

    A three-dimensional (3-D) computer model of the Advanced Neutron Source (ANS) main control complex is being developed. The main control complex includes the main control room, the technical support center, the materials irradiation control room, computer equipment rooms, communications equipment rooms, cable-spreading rooms, and some support offices and breakroom facilities. The model will be used to provide facility designers and operations personnel with capabilities for fit-up/interference analysis, visual ''walk-throughs'' for optimizing maintain-ability, and human factors and operability analyses. It will be used to determine performance design characteristics, to generate construction drawings, and to integrate control room layout, equipment mounting, grounding equipment, electrical cabling, and utility services into ANS building designs. This paper describes the development of the initial phase of the 3-D computer model for the ANS main control complex and plans for its development and use

  17. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs. Final Environmental Impact Statement: Volume 1, Appendix L, Environmental Justice

    International Nuclear Information System (INIS)

    1995-04-01

    Appendix L provides an assessment of the areas surrounding the 10 sites under consideration for the management of spent nuclear fuels (SNF) under all programmatic alternatives considered in this volume. It is divided into two sections: (a) the five sites considered for the management of DOE naval SNF only (under the No Action and Decentralization alternatives, and (b) the five DOE sites being considered for the management of all types of DOE SNF under all alternatives. The five sites considered for the management of naval SNF only are the Norfolk Naval Shipyard, Portsmouth, Virginia; Portsmouth Naval Shipyard, Kittery, Maine; Pearl Harbor Naval Shipyard, Honolulu, Hawaii; Puget Sound Naval Shipyard, Bremerton, Washington; and Kesselring Site, West Milton, New York. The five DOE sites considered for the management of some portion or all DOE SNF are the Savannah River Site, Aiken, South Carolina; Oak Ridge Reservation, Oak Ridge, Tennessee; Idaho National Engineering Laboratory, Idaho Falls, Idaho; Hanford Site, Richland, Washington; and Nevada Test Site, Mercury, Nevada. This assessment includes potential adverse impacts resulting from both onsite activities and associated transportation of materials. Based on this assessment, it is concluded that none of the alternatives analyzed results in disproportionately high and adverse effects on minority populations or low-income communities surrounding any of the sites under consideration for the management of SNF or associated offsite transportation routes

  18. Innovation in a complex environment

    Directory of Open Access Journals (Sweden)

    René Pellissier

    2012-02-01

    Full Text Available Background: As our world becomes more global and competitive yet less predictable, the focus seems to be increasingly on looking to innovation activities to remain competitive. Although there is little doubt that a nation’s competitiveness is embedded in its innovativeness, the complex environment should not be ignored. Complexity is not accounted for in balance sheets or reported in reports; it becomes entrenched in every activity in the organisation. Innovation takes many forms and comes in different shapes.Objectives: The study objectives were, firstly, to establish the determinants for complexity and how these can be addressed from a design point of view in order to ensure innovation success and, secondly, to determine how this changes innovation forms and applications.Method: Two approaches were offered to deal with a complex environment – one allowing for complexity for organisational innovation and the other introducing reductionism to minimise complexity. These approaches were examined in a qualitative study involving case studies, open-ended interviews and content analysis between seven developing economy (South African organisations and seven developed economy (US organisations.Results: This study presented a proposed framework for (organisational innovation in a complex environment versus a framework that minimises complexity. The comparative organisational analysis demonstrated the importance of initiating organisational innovation to address internal and external complexity, with the focus being on the leadership actions, their selected operating models and resultant organisational innovations designs, rather than on technological innovations.Conclusion: This study cautioned the preference for technological innovation within organisations and suggested alternative innovation forms (such as organisational and management innovation be used to remain competitive in a complex environment. 

  19. Diagonalization of Bounded Linear Operators on Separable Quaternionic Hilbert Space

    International Nuclear Information System (INIS)

    Feng Youling; Cao, Yang; Wang Haijun

    2012-01-01

    By using the representation of its complex-conjugate pairs, we have investigated the diagonalization of a bounded linear operator on separable infinite-dimensional right quaternionic Hilbert space. The sufficient condition for diagonalizability of quaternionic operators is derived. The result is applied to anti-Hermitian operators, which is essential for solving Schroedinger equation in quaternionic quantum mechanics.

  20. The radiation dose dilemma in the hybrid operating room

    NARCIS (Netherlands)

    de Ruiter, QMB

    2016-01-01

    The of the hybrid Operation room (an operation room combined with advanced radiological X-ray equipment) is gaining popularity, as it is now the preferred room to perform (complex) endovascular aortic procedures. The fixed C-arms equipped in these rooms make it possible to gain very high image

  1. Overview of Intelligent Systems and Operations Development

    Science.gov (United States)

    Pallix, Joan; Dorais, Greg; Penix, John

    2004-01-01

    To achieve NASA's ambitious mission objectives for the future, aircraft and spacecraft will need intelligence to take the correct action in a variety of circumstances. Vehicle intelligence can be defined as the ability to "do the right thing" when faced with a complex decision-making situation. It will be necessary to implement integrated autonomous operations and low-level adaptive flight control technologies to direct actions that enhance the safety and success of complex missions despite component failures, degraded performance, operator errors, and environment uncertainty. This paper will describe the array of technologies required to meet these complex objectives. This includes the integration of high-level reasoning and autonomous capabilities with multiple subsystem controllers for robust performance. Future intelligent systems will use models of the system, its environment, and other intelligent agents with which it interacts. They will also require planners, reasoning engines, and adaptive controllers that can recommend or execute commands enabling the system to respond intelligently. The presentation will also address the development of highly dependable software, which is a key component to ensure the reliability of intelligent systems.

  2. Carlson iterating rational approximation and performance analysis of fractional operator with arbitrary order

    International Nuclear Information System (INIS)

    He Qiu-Yan; Yuan Xiao; Yu Bo

    2017-01-01

    The performance analysis of the generalized Carlson iterating process, which can realize the rational approximation of fractional operator with arbitrary order, is presented in this paper. The reasons why the generalized Carlson iterating function possesses more excellent properties such as self-similarity and exponential symmetry are also explained. K-index, P-index, O-index, and complexity index are introduced to contribute to performance analysis. Considering nine different operational orders and choosing an appropriate rational initial impedance for a certain operational order, these rational approximation impedance functions calculated by the iterating function meet computational rationality, positive reality, and operational validity. Then they are capable of having the operational performance of fractional operators and being physical realization. The approximation performance of the impedance function to the ideal fractional operator and the circuit network complexity are also exhibited. (paper)

  3. Non-equilibrium phase transitions in complex plasma

    International Nuclear Information System (INIS)

    Suetterlin, K R; Raeth, C; Ivlev, A V; Thomas, H M; Khrapak, S; Zhdanov, S; Rubin-Zuzic, M; Morfill, G E; Wysocki, A; Loewen, H; Goedheer, W J; Fortov, V E; Lipaev, A M; Molotkov, V I; Petrov, O F

    2010-01-01

    Complex plasma being the 'plasma state of soft matter' is especially suitable for investigations of non-equilibrium phase transitions. Non-equilibrium phase transitions can manifest in dissipative structures or self-organization. Two specific examples are lane formation and phase separation. Using the permanent microgravity laboratory PK-3 Plus, operating onboard the International Space Station, we performed unique experiments with binary mixtures of complex plasmas that showed both lane formation and phase separation. These observations have been augmented by comprehensive numerical and theoretical studies. In this paper we present an overview of our most important results. In addition we put our results in context with research of complex plasmas, binary systems and non-equilibrium phase transitions. Necessary and promising future complex plasma experiments on phase separation and lane formation are briefly discussed.

  4. Error analysis of nuclear power plant operator cognitive behavior

    International Nuclear Information System (INIS)

    He Xuhong; Zhao Bingquan; Chen Yulong

    2001-01-01

    Nuclear power plant is a complex human-machine system integrated with many advanced machines, electron devices and automatic controls. It demands operators to have high cognitive ability and correct analysis skill. The author divides operator's cognitive process into five stages to analysis. With this cognitive model, operator's cognitive error is analysed to get the root causes and stages that error happens. The results of the analysis serve as a basis in design of control rooms and training and evaluation of operators

  5. A note on the Lie symmetries of complex partial differential

    Indian Academy of Sciences (India)

    Folklore suggests that the split Lie-like operators of a complex partial differential equation are symmetries of the split system of real partial differential equations. However, this is not the case generally. We illustrate this by using the complex heat equation, wave equation with dissipation, the nonlinear Burgers equation and ...

  6. Efficient Simulation Modeling of an Integrated High-Level-Waste Processing Complex

    International Nuclear Information System (INIS)

    Gregory, Michael V.; Paul, Pran K.

    2000-01-01

    An integrated computational tool named the Production Planning Model (ProdMod) has been developed to simulate the operation of the entire high-level-waste complex (HLW) at the Savannah River Site (SRS) over its full life cycle. ProdMod is used to guide SRS management in operating the waste complex in an economically efficient and environmentally sound manner. SRS HLW operations are modeled using coupled algebraic equations. The dynamic nature of plant processes is modeled in the form of a linear construct in which the time dependence is implicit. Batch processes are modeled in discrete event-space, while continuous processes are modeled in time-space. The ProdMod methodology maps between event-space and time-space such that the inherent mathematical discontinuities in batch process simulation are avoided without sacrificing any of the necessary detail in the batch recipe steps. Modeling the processes separately in event- and time-space using linear constructs, and then coupling the two spaces, has accelerated the speed of simulation compared to a typical dynamic simulation. The ProdMod simulator models have been validated against operating data and other computer codes. Case studies have demonstrated the usefulness of the ProdMod simulator in developing strategies that demonstrate significant cost savings in operating the SRS HLW complex and in verifying the feasibility of newly proposed processes

  7. Multifaceted Modelling of Complex Business Enterprises.

    Science.gov (United States)

    Chakraborty, Subrata; Mengersen, Kerrie; Fidge, Colin; Ma, Lin; Lassen, David

    2015-01-01

    We formalise and present a new generic multifaceted complex system approach for modelling complex business enterprises. Our method has a strong focus on integrating the various data types available in an enterprise which represent the diverse perspectives of various stakeholders. We explain the challenges faced and define a novel approach to converting diverse data types into usable Bayesian probability forms. The data types that can be integrated include historic data, survey data, and management planning data, expert knowledge and incomplete data. The structural complexities of the complex system modelling process, based on various decision contexts, are also explained along with a solution. This new application of complex system models as a management tool for decision making is demonstrated using a railway transport case study. The case study demonstrates how the new approach can be utilised to develop a customised decision support model for a specific enterprise. Various decision scenarios are also provided to illustrate the versatility of the decision model at different phases of enterprise operations such as planning and control.

  8. Multifaceted Modelling of Complex Business Enterprises

    Science.gov (United States)

    2015-01-01

    We formalise and present a new generic multifaceted complex system approach for modelling complex business enterprises. Our method has a strong focus on integrating the various data types available in an enterprise which represent the diverse perspectives of various stakeholders. We explain the challenges faced and define a novel approach to converting diverse data types into usable Bayesian probability forms. The data types that can be integrated include historic data, survey data, and management planning data, expert knowledge and incomplete data. The structural complexities of the complex system modelling process, based on various decision contexts, are also explained along with a solution. This new application of complex system models as a management tool for decision making is demonstrated using a railway transport case study. The case study demonstrates how the new approach can be utilised to develop a customised decision support model for a specific enterprise. Various decision scenarios are also provided to illustrate the versatility of the decision model at different phases of enterprise operations such as planning and control. PMID:26247591

  9. Research and application of embedded real-time operating system

    Science.gov (United States)

    Zhang, Bo

    2013-03-01

    In this paper, based on the analysis of existing embedded real-time operating system, the architecture of an operating system is designed and implemented. The experimental results show that the design fully complies with the requirements of embedded real-time operating system, can achieve the purposes of reducing the complexity of embedded software design and improving the maintainability, reliability, flexibility. Therefore, this design program has high practical value.

  10. Approaching human language with complex networks

    Science.gov (United States)

    Cong, Jin; Liu, Haitao

    2014-12-01

    The interest in modeling and analyzing human language with complex networks is on the rise in recent years and a considerable body of research in this area has already been accumulated. We survey three major lines of linguistic research from the complex network approach: 1) characterization of human language as a multi-level system with complex network analysis; 2) linguistic typological research with the application of linguistic networks and their quantitative measures; and 3) relationships between the system-level complexity of human language (determined by the topology of linguistic networks) and microscopic linguistic (e.g., syntactic) features (as the traditional concern of linguistics). We show that the models and quantitative tools of complex networks, when exploited properly, can constitute an operational methodology for linguistic inquiry, which contributes to the understanding of human language and the development of linguistics. We conclude our review with suggestions for future linguistic research from the complex network approach: 1) relationships between the system-level complexity of human language and microscopic linguistic features; 2) expansion of research scope from the global properties to other levels of granularity of linguistic networks; and 3) combination of linguistic network analysis with other quantitative studies of language (such as quantitative linguistics).

  11. Strategic directions of personnel potential forming of a building complex

    Directory of Open Access Journals (Sweden)

    Simonova Marina

    2016-01-01

    Full Text Available The analysis of directions of strategic approach forming of labor potential management of a building complex is carried out in this paper. On the basis of this analysis the system of actions for strategy forming divided into consecutive stages is offered. The development of the personnel forecast is a strategic planning basis. One of personnel forecast variants is the correlation of needs estimates in personnel of a building complex with available allowances. On the basis of the personnel forecast strategic analysis it is possible to compose working programs for the stated goals of implementation. Operational assessment of personnel requirements of a building complex is proved to be combined with strategic objectives. Some assessment approaches to qualitative and quantitative need for specialists of a building complex are offered. The fact that high-quality labor power supply system of a building complex with should be based on industry development forecast and increase in construction products competitiveness is revealed in the article. Strategic management priority will allow to react immediately to the current situation changes, to introduce amendments both into tactical, and operational management.

  12. The Cognitive Architecture for Chaining of Two Mental Operations

    Science.gov (United States)

    Sackur, Jerome; Dehaene, Stanislas

    2009-01-01

    A simple view, which dates back to Turing, proposes that complex cognitive operations are composed of serially arranged elementary operations, each passing intermediate results to the next. However, whether and how such serial processing is achieved with a brain composed of massively parallel processors, remains an open question. Here, we study…

  13. Assessment of an Onboard EO Sensor to Enable Detect-and-Sense Capability for UAVs Operating in a Cluttered Environment

    Science.gov (United States)

    2017-09-01

    rates of accidents. To ensure safe operation in such complex environment , the unmanned systems have to perform accurate and timely detection and...security. C. PROBLEM FORMULATION To ensure the safe operation of unmanned systems in modern complex environment , this thesis strives to answer two...computer vision algorithm work in a complex operating environment with multiple moving objects? This thesis examines the integration of the CV

  14. Embracing uncertainty, managing complexity: applying complexity thinking principles to transformation efforts in healthcare systems.

    Science.gov (United States)

    Khan, Sobia; Vandermorris, Ashley; Shepherd, John; Begun, James W; Lanham, Holly Jordan; Uhl-Bien, Mary; Berta, Whitney

    2018-03-21

    Complexity thinking is increasingly being embraced in healthcare, which is often described as a complex adaptive system (CAS). Applying CAS to healthcare as an explanatory model for understanding the nature of the system, and to stimulate changes and transformations within the system, is valuable. A seminar series on systems and complexity thinking hosted at the University of Toronto in 2016 offered a number of insights on applications of CAS perspectives to healthcare that we explore here. We synthesized topics from this series into a set of six insights on how complexity thinking fosters a deeper understanding of accepted ideas in healthcare, applications of CAS to actors within the system, and paradoxes in applications of complexity thinking that may require further debate: 1) a complexity lens helps us better understand the nebulous term "context"; 2) concepts of CAS may be applied differently when actors are cognizant of the system in which they operate; 3) actor responses to uncertainty within a CAS is a mechanism for emergent and intentional adaptation; 4) acknowledging complexity supports patient-centred intersectional approaches to patient care; 5) complexity perspectives can support ways that leaders manage change (and transformation) in healthcare; and 6) complexity demands different ways of implementing ideas and assessing the system. To enhance our exploration of key insights, we augmented the knowledge gleaned from the series with key articles on complexity in the literature. Ultimately, complexity thinking acknowledges the "messiness" that we seek to control in healthcare and encourages us to embrace it. This means seeing challenges as opportunities for adaptation, stimulating innovative solutions to ensure positive adaptation, leveraging the social system to enable ideas to emerge and spread across the system, and even more important, acknowledging that these adaptive actions are part of system behaviour just as much as periods of stability are. By

  15. Functions of a complex variable and some of their applications

    CERN Document Server

    Fuchs, B A; Sneddon, I N; Ulam, S

    1961-01-01

    Functions of a Complex Variable and Some of Their Applications, Volume 1, discusses the fundamental ideas of the theory of functions of a complex variable. The book is the result of a complete rewriting and revision of a translation of the second (1957) Russian edition. Numerous changes and additions have been made, both in the text and in the solutions of the Exercises. The book begins with a review of arithmetical operations with complex numbers. Separate chapters discuss the fundamentals of complex analysis; the concept of conformal transformations; the most important of the elementary fun

  16. Calculation of Complexity Costs – An Approach for Rationalizing a Product Program

    DEFF Research Database (Denmark)

    Hansen, Christian Lindschou; Mortensen, Niels Henrik; Hvam, Lars

    2012-01-01

    This paper proposes an operational method for rationalizing a product program based on the calculation of complexity costs. The method takes its starting point in the calculation of complexity costs on a product program level. This is done throughout the value chain ranging from component invento...... of a product program. These findings represent an improved decision basis for the planning of reactive and proactive initiatives of rationalizing a product program.......This paper proposes an operational method for rationalizing a product program based on the calculation of complexity costs. The method takes its starting point in the calculation of complexity costs on a product program level. This is done throughout the value chain ranging from component...... inventories at the factory sites, all the way to the distribution of finished goods from distribution centers to the customers. The method proposes a step-wise approach including the analysis, quantification and allocation of product program complexity costs by the means of identifying of a number...

  17. Real-Time Operating Systems for Multicore Embedded Systems

    OpenAIRE

    Tomiyama, Hiroyuki; Honda, Shinya; Takada, Hiroaki

    2008-01-01

    Multicore systems-on-chip have become popular inthe design of embedded systems in order to simultaneously achieve high performance and low power consumption. On the software side, real-time operating systems are necessary in orderto handle growing complexity of embedded software. This paper describes requirements, design principles and implementation techniques for real-time operating systems to be used inasymmetric multicore systems.

  18. Unpacking Referent Units in Fraction Operations

    Science.gov (United States)

    Philipp, Randolph A.; Hawthorne, Casey

    2015-01-01

    Although fraction operations are procedurally straightforward, they are complex, because they require learners to conceptualize different units and view quantities in multiple ways. Prospective secondary school teachers sometimes provide an algebraic explanation for inverting and multiplying when dividing fractions. That authors of this article…

  19. Understanding Crew Decision-Making in the Presence of Complexity: A Flight Simulation Experiment

    Science.gov (United States)

    Young, Steven D.; Daniels, Taumi S.; Evans, Emory; deHaag, Maarten Uijt; Duan, Pengfei

    2013-01-01

    Crew decision making and response have long been leading causal and contributing factors associated with aircraft accidents. Further, it is anticipated that future aircraft and operational environments will increase exposure to risks related to these factors if proactive steps are not taken to account for ever-increasing complexity. A flight simulation study was designed to collect data to help in understanding how complexity can, or may, be manifest. More specifically, an experimental apparatus was constructed that allowed for manipulation of information complexity and uncertainty, while also manipulating operational complexity and uncertainty. Through these manipulations, and the aid of experienced airline pilots, several issues have been discovered, related most prominently to the influence of information content, quality, and management. Flight crews were immersed in an environment that included new operational complexities suggested for the future air transportation system as well as new technological complexities (e.g. electronic flight bags, expanded data link services, synthetic and enhanced vision systems, and interval management automation). In addition, a set of off-nominal situations were emulated. These included, for example, adverse weather conditions, traffic deviations, equipment failures, poor data quality, communication errors, and unexpected clearances, or changes to flight plans. Each situation was based on one or more reference events from past accidents or incidents, or on a similar case that had been used in previous developmental tests or studies. Over the course of the study, 10 twopilot airline crews participated, completing over 230 flights. Each flight consisted of an approach beginning at 10,000 ft. Based on the recorded data and pilot and research observations, preliminary results are presented regarding decision-making issues in the presence of the operational and technological complexities encountered during the flights.

  20. Resource allocation in shared spectrum access communications for operators with diverse service requirements

    Science.gov (United States)

    Kibria, Mirza Golam; Villardi, Gabriel Porto; Ishizu, Kentaro; Kojima, Fumihide; Yano, Hiroyuki

    2016-12-01

    In this paper, we study inter-operator spectrum sharing and intra-operator resource allocation in shared spectrum access communication systems and propose efficient dynamic solutions to address both inter-operator and intra-operator resource allocation optimization problems. For inter-operator spectrum sharing, we present two competent approaches, namely the subcarrier gain-based sharing and fragmentation-based sharing, which carry out fair and flexible allocation of the available shareable spectrum among the operators subject to certain well-defined sharing rules, traffic demands, and channel propagation characteristics. The subcarrier gain-based spectrum sharing scheme has been found to be more efficient in terms of achieved throughput. However, the fragmentation-based sharing is more attractive in terms of computational complexity. For intra-operator resource allocation, we consider resource allocation problem with users' dissimilar service requirements, where the operator supports users with delay constraint and non-delay constraint service requirements, simultaneously. This optimization problem is a mixed-integer non-linear programming problem and non-convex, which is computationally very expensive, and the complexity grows exponentially with the number of integer variables. We propose less-complex and efficient suboptimal solution based on formulating exact linearization, linear approximation, and convexification techniques for the non-linear and/or non-convex objective functions and constraints. Extensive simulation performance analysis has been carried out that validates the efficiency of the proposed solution.

  1. Intelligent vision system for autonomous vehicle operations

    Science.gov (United States)

    Scholl, Marija S.

    1991-01-01

    A complex optical system consisting of a 4f optical correlator with programmatic filters under the control of a digital on-board computer that operates at video rates for filter generation, storage, and management is described.

  2. Software complex for developing dynamically packed program system for experiment automation

    International Nuclear Information System (INIS)

    Baluka, G.; Salamatin, I.M.

    1985-01-01

    Software complex for developing dynamically packed program system for experiment automation is considered. The complex includes general-purpose programming systems represented as the RT-11 standard operating system and specially developed problem-oriented moduli providing execution of certain jobs. The described complex is realized in the PASKAL' and MAKRO-2 languages and it is rather flexible to variations of the technique of the experiment

  3. Complex numbers from A to Z

    CERN Document Server

    Andreescu, Titu

    2014-01-01

    It is impossible to imagine modern mathematics without complex numbers. The second edition of Complex Numbers from A to … Z introduces the reader to this fascinating subject that, from the time of L. Euler, has become one of the most utilized ideas in mathematics. The exposition concentrates on key concepts and then elementary results concerning these numbers. The reader learns how complex numbers can be used to solve algebraic equations and to understand the geometric interpretation of complex numbers and the operations involving them. The theoretical parts of the book are augmented with rich exercises and problems at various levels of difficulty. Many new problems and solutions have been added in this second edition. A special feature of the book is the last chapter, a selection of outstanding Olympiad and other important mathematical contest problems solved by employing the methods already presented. The book reflects the unique experience of the authors. It distills a vast mathematical literature, most ...

  4. Wave propagation in complex structures with LEGO

    NARCIS (Netherlands)

    Lancellotti, V.; Hon, de B.P.; Tijhuis, A.G.

    2012-01-01

    We present the extension of the linear embedding via Green's operators (LEGO) scheme to problems that involve elementary sources localized inside complex structures made of different dielectric media with inclusions. We show how this new feature allows solving problems of wave propagation within,

  5. Purpose and benefit of control system training for operators

    International Nuclear Information System (INIS)

    Zimoch, E.; Luedeke, A.

    2012-01-01

    The complexity of accelerators is ever increasing and today it is typical that a large number of feedback loops are implemented, based on sophisticated models which describe the underlying physics. Despite this increased complexity the machine operators must still effectively monitor and supervise the desired behavior of the accelerator. This is not alone sufficient; additionally, the correct operation of the control system must also be verified. This is not always easy since the structure, design, and performance of the control system is usually not visualized and is often hidden to the operator. To better deal with this situation operators need some knowledge of the control system in order to react properly in the case of problems. In fact operators need mental models of the control system to recognize fault states and react appropriate to errors and misbehavior of both, the accelerator and the control system itself. Mental models gained only on infrequent experience can be imprecise or plain wrong in worst case. Control system training can provide a foundation to build better mental models and therefore help to enhance operator responses and machine availability. For a refinement of the mental model repeated experience is needed. This can be provided by training sessions at the real accelerator

  6. Application of fuzzy logic operation and control to BWRs

    International Nuclear Information System (INIS)

    Junichi Tanji; Mitsuo Kinoshita; Takaharu Fukuzaki; Yasuhiro Kobayashi

    1993-01-01

    Fuzzy logic control schemes employing linguistic decision rules for flexible operator control strategies have undergone application tests in dynamic systems. The advantages claimed for fuzzy logic control are its abilities: (a) to facilitate direct use of skillful operator know-how for automatic operation and control of the systems and (b) to provide robust multivariable control for complex plants. The authors have also studied applications of fuzzy logic control to automatic startup operations and load-following control in boiling water reactors, pursuing these same advantages

  7. Boolean Operations, Joins, and the Extended Low Hierarchy

    OpenAIRE

    Hemaspaandra, Lane A.; Jiang, Zhigen; Rothe, Joerg; Watanabe, Osamu

    1999-01-01

    We prove that the join of two sets may actually fall into a lower level of the extended low hierarchy than either of the sets. In particular, there exist sets that are not in the second level of the extended low hierarchy, EL_2, yet their join is in EL_2. That is, in terms of extended lowness, the join operator can lower complexity. Since in a strong intuitive sense the join does not lower complexity, our result suggests that the extended low hierarchy is unnatural as a complexity measure. We...

  8. Some human performance paradoxes of nuclear operations

    International Nuclear Information System (INIS)

    Otway, H.J.; Misenta, R.

    1980-01-01

    Roughly once a year, an abnormal situation with emergency potential may suddenly break the calm monotony of nuclear-power plant operation. The operating crew, perhaps under-stimulated by monitoring largely automatic processes, may then be expected to make correct inferences and decisions about complex phenomena. However, under stress, the operators may resort to using their 'best-learned responses', inappropriate to the real situation. Recent events at Three Mile Island prompted a variety of suggestions intended to improve operator performance, eg higher qualifications, more pay, or enhanced status. The authors stress the paradoxes of nuclear operation, conclude that some 'intuitively obvious' suggestions might have the opposite effect to that intended, and explore the possibility of introducing frequent, realistic emergency drills. Even this approach raises paradoxes - perhaps the role of the operator should be eliminated, or redefined to allow less human intervention in emergencies. (author)

  9. Development and operation of an integrated sampling probe and gas analyzer for turbulent mixing studies in complex supersonic flows

    Science.gov (United States)

    Wiswall, John D.

    For many aerospace applications, mixing enhancement between co-flowing streams has been identified as a critical and enabling technology. Due to short fuel residence times in scramjet combustors, combustion is limited by the molecular mixing of hydrogen (fuel) and air. Determining the mixedness of fuel and air in these complex supersonic flowfields is critical to the advancement of novel injection schemes currently being developed at UTA in collaboration with NASA Langley and intended to be used on a future two-stage to orbit (~Mach 16) hypersonic air-breathing vehicle for space access. Expanding on previous work, an instrument has been designed, fabricated, and tested in order to measure mean concentrations of injected helium (a passive scalar used instead of hazardous hydrogen) and to quantitatively characterize the nature of the high-frequency concentration fluctuations encountered in the compressible, turbulent, and high-speed (up to Mach 3.5) complex flows associated with the new supersonic injection schemes. This important high-frequency data is not yet attainable when employing other techniques such as Laser Induced Fluorescence, Filtered Rayleigh Scattering or mass spectroscopy in the same complex supersonic flows. The probe operates by exploiting the difference between the thermodynamic properties of two species through independent massflow measurements and calibration. The probe samples isokinetically from the flowfield's area of interest and the helium concentration may be uniquely determined by hot-film anemometry and internally measured stagnation conditions. The final design has a diameter of 0.25" and is only 2.22" long. The overall accuracy of the probe is 3% in molar fraction of helium. The frequency response of mean concentration measurements is estimated at 103 Hz, while high-frequency hot-film measurements were conducted at 60 kHz. Additionally, the work presents an analysis of the probe's internal mixing effects and the effects of the spatial

  10. A curative treatment option for Complex Regional Pain Syndrome (CRPS) Type I: dorsal root entry zone operation (report of two cases).

    Science.gov (United States)

    Kanpolat, Yucel; Al-Beyati, Eyyub; Ugur, Hasan Caglar; Akpinar, Gokhan; Kahilogullari, Gokmen; Bozkurt, Melih

    2014-01-01

    Complex Regional Pain Syndrome Type I (CRPS-I) is a debated health problem concerning its pathophysiology and treatment strategies. A 12-year-old boy and a 35-year-old woman were diagnosed with CRPS-I at different times. They had previously undergone various types of interventions with no success. After one year of follow-up and observation, DREZ lesioning operation was performed. Afterwards, both cases had transient lower extremity ataxia. The first case was followed for 60 months with no recurrence and total cure. The second case was pain-free until the 6th month, when she required psychological support; she was followed for 33 months with partial satisfactory outcome. Although not a first-line option, DREZ lesioning procedure can be chosen and may be a curative option in selected cases of CRPS-I who are unresponsive to conventional therapies.

  11. Smooth homogeneous structures in operator theory

    CERN Document Server

    Beltita, Daniel

    2005-01-01

    Geometric ideas and techniques play an important role in operator theory and the theory of operator algebras. Smooth Homogeneous Structures in Operator Theory builds the background needed to understand this circle of ideas and reports on recent developments in this fruitful field of research. Requiring only a moderate familiarity with functional analysis and general topology, the author begins with an introduction to infinite dimensional Lie theory with emphasis on the relationship between Lie groups and Lie algebras. A detailed examination of smooth homogeneous spaces follows. This study is illustrated by familiar examples from operator theory and develops methods that allow endowing such spaces with structures of complex manifolds. The final section of the book explores equivariant monotone operators and Kähler structures. It examines certain symmetry properties of abstract reproducing kernels and arrives at a very general version of the construction of restricted Grassmann manifolds from the theory of loo...

  12. Engineering Process Monitoring for Control Room Operation

    CERN Document Server

    Bätz, M

    2001-01-01

    A major challenge in process operation is to reduce costs and increase system efficiency whereas the complexity of automated process engineering, control and monitoring systems increases continuously. To cope with this challenge the design, implementation and operation of process monitoring systems for control room operation have to be treated as an ensemble. This is only possible if the engineering of the monitoring information is focused on the production objective and is lead in close collaboration of control room teams, exploitation personnel and process specialists. In this paper some principles for the engineering of monitoring information for control room operation are developed at the example of the exploitation of a particle accelerator at the European Laboratory for Nuclear Research (CERN).

  13. Study and realisation of chaining operators

    International Nuclear Information System (INIS)

    Khan, Mohd Solaiman

    1970-01-01

    Within the frame of researches in the field of binary analysis performed in the nuclear instrumentation department of the Saclay Nuclear Centre, this research thesis belongs to the field of applications of binary analysis theories, and more particularly to the development and study of a chaining operator (chaining operators are used to develop complex automatic systems with a clear separation between information processing and program-based management of this processing). The author first recalls some notions of binary analysis: algebraic binary sets, products and their specific properties, and practical realisation of binary functions by means of logical circuits. He recalls methods for the general study of sequential systems; generalities, base functions, elementary reflex functions, graphical study of sequential systems, search for and removal of commutation variations. He discusses the present organisation of electronic computers: software, hardware, synchronous and asynchronous control. He presents chaining operators: generalities, computation of a chaining operator, static aspect of chaining operators. He reports and comments the practical realisation of chaining operators: components, measurements performed on elaborated chaining operators, simulation experimental set-up [fr

  14. UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1986-01-01

    Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

  15. Establishing a methodology to develop complex sociotechnical systems

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2013-02-01

    Full Text Available Many modern management systems, such as military command and control, tend to be large and highly interconnected sociotechnical systems operating in a complex environment. Successful development, assessment and implementation of these systems...

  16. The step complexity measure - its meaning and applications

    International Nuclear Information System (INIS)

    Park, Jin Kyun; Jung, Won Dea; Kim, Jae Whan; Ha, Jae Joo

    2003-01-01

    According to related studies, it was revealed that the procedural deviation plays a significant role in initiating accidents or incidents. This means that, to maximize safety, it is indispensable to be able to answer the question of 'why the operators deviate from procedures?' In this study, the SC(Step Complexity) measure is introduced to investigate its applicability for studying the procedural deviation, since it was shown that the change of the operators' performance is strongly correlated with the change of SC scores. This means that the SC measure could play an important role for researches related to the procedural deviation, since it is strongly believed that complicated procedures would affect both the operators' performance and the possibility of the procedural deviation. Thus, to ensure this expectation, the meaning of the SC measure is investigated through brief explanations including the necessity, theoretical basis and verification activities of the SC measure. As a result, it is confirmed that the SC measure can be used to explain the change of the operators' performance due to the task complexity implied by procedures. In addition, it seems that the SC measure may be useful for various purposes, particularly for scrutinizing the relationship between the procedural deviation and complicated procedures

  17. Automated complex for information retrieval and processing in the gamma-resonance spectrometry

    International Nuclear Information System (INIS)

    Belogurov, V.N.; Bylinkin, V.A.

    1977-01-01

    A complex for information retrieval and processing in the Moessbauer effect spectrometry is described. The complex consists of a set of 4 precision spectrometers nad a program system for the computation of Moessbauer effect spectrum. High velocity accuracy - 0.004 mm/s during 6 months operation is achieved by introducing an additional negative feedback, the signal from which is obtained when the time of electromagnetic vibrator driving rod passage in the middle of the cycle is compared to the half-period length of the operation of the multichannel analyser address register. Information from 4 spectrometers via a commutation unit and an equalizer unit is analyzed by one analyser. Descriptions and schemes of spectrometers, procedure and scheme of calibration and checking of their operation are given. Described are the system of connection of spectrometers with the BESM-4 computer and the program complex including programs of information input, check-up,, correction and storage in the computer, the calibration of the spectrometer velocity scale and the programs for computing gamma-resonance spectra. The description of the operational principles of these programs and their block diagrams is given

  18. Operational experience with propulsion nuclear plants

    International Nuclear Information System (INIS)

    Polunichev, V.

    2000-01-01

    Russia possesses a powerful icebreaker transport fleet which offers a solution for important socio-economic tasks of the country's northern regions by maintaining a year-round navigation along the Arctic Sea route. The total operating record of the propulsion nuclear reactors till now exceeds 150 reactor-years, their main equipment items operating life amounted to 120,000 h. Progressive design-constructional solutions being perfected continuously during 40 years of nuclear-powered ships creation in Russia and well proven technology of all components used in the marine nuclear reactors give grounds to recommend marine Nuclear Steam Supply Systems (NSSSs) of KLT-40 type as energy sources for heat and power cogeneration plants and sea water desalination complexes, particularly as floating installations. Co-generation stations are considered for deployment in the extreme north of Russia. Nuclear floating desalination complexes can be used for drinkable water production in coastal regions of Northern Africa, the Near East, India etc. (author)

  19. An Analysis of Air Pollution Control Technologies for Shipyard Emitted Volatile Organic Compounds (VOCS)

    National Research Council Canada - National Science Library

    Snider, Thomas J

    1993-01-01

    ...) emissions from industrial operations. One approach to VOC reduction is through air pollution control technology to remove the contaminants from the exhaust airstream of VOC generating processes...

  20. Cognitive Performance in Operational Environments

    Science.gov (United States)

    Russo, Michael; McGhee, James; Friedler, Edna; Thomas, Maria

    2005-01-01

    Optimal cognition during complex and sustained operations is a critical component for success in current and future military operations. "Cognitive Performance, Judgment, and Decision-making" (CPJD) is a newly organized U.S. Army Medical Research and Materiel Command research program focused on sustaining operational effectiveness of Future Force Warriors by developing paradigms through which militarily-relevant, higher-order cognitive performance, judgment, and decision-making can be assessed and sustained in individuals, small teams, and leaders of network-centric fighting units. CPJD evaluates the impact of stressors intrinsic to military operational environments (e.g., sleep deprivation, workload, fatigue, temperature extremes, altitude, environmental/physiological disruption) on military performance, evaluates noninvasive automated methods for monitoring and predicting cognitive performance, and investigates pharmaceutical strategies (e.g., stimulant countermeasures, hypnotics) to mitigate performance decrements. This manuscript describes the CPJD program, discusses the metrics utilized to relate militarily applied research findings to academic research, and discusses how the simulated combat capabilities of a synthetic battle laboratory may facilitate future cognitive performance research.

  1. Self-management interventions : Proposal and validation of a new operational definition

    NARCIS (Netherlands)

    Jonkman, Nini H; Schuurmans, Marieke J; Jaarsma, Tiny; Shortridge-Baggett, Lillie M; Hoes, Arno W; Trappenburg, Jaap C A

    2016-01-01

    OBJECTIVES: Systematic reviews on complex interventions like self-management interventions often do not explicitly state an operational definition of the intervention studied, which may impact the review's conclusions. This study aimed to propose an operational definition of self-management

  2. Self-management interventions: Proposal and validation of a new operational definition

    NARCIS (Netherlands)

    Jonkman, N.H.; Schuurmans, Marieke J.; Jaarsma, Tiny; Shortbridge-Baggett, Lillie M.; Hoes, Arno W.; Trappenburg, Jaap C A

    2016-01-01

    Objectives: Systematic reviews on complex interventions like self-management interventions often do not explicitly state an operational definition of the intervention studied, which may impact the review's conclusions. This study aimed to propose an operational definition of self-management

  3. The Roles of Decision Makers in Special Operations

    Science.gov (United States)

    2016-12-01

    Forces’ role in solving complex problems. Government leadership is eager to use Special Operations Forces (SOF) to respond to these complex problems...international community and the Israeli authorities as well. The PFLP leadership , in particular, favored hijacking as a terrorist action.12 Other...people’s problems. The members of the Democratic Revolutionary Front of the Liberation of Arabistan thought that calling the rest of the world’s attention

  4. Columbia River System Operation Review final environmental impact statement. Appendix A: River Operation Simulation (ROSE)

    International Nuclear Information System (INIS)

    1995-11-01

    The System Operation Review (SOR) is a study and environmental compliance process being used by the three Federal agencies to analyze future operations of the system and river use issues. The goal of the SOR is to achieve a coordinated system operation strategy for the river that better meets the needs of all river users. This technical appendix addresses only the effects of alternative system operating strategies for managing the Columbia River system. The River Operation Simulation Experts (ROSE) work group is comprised of representatives of the Corps, BPA, Reclamation, NMFS, Pacific Northwest Utilities Conference Committee (PNUCC), and Northwest Power Planning Council (NPPC). ROSE was responsible for using computer hydroregulation models to simulate the operation of the river system for all of the alternatives evaluated in screening and full scale analysis in SOR. These models are complex computer programs which sequentially route streamflows through each dam in the system, calculating the streamflows, reservoir elevations, spill, power generation and other information at each project and pertinent locations on the river system. ROSE first reviewed specifications of proposed alternatives to determine whether such alternatives were formulated adequately to be run on hydroregulation models

  5. Mathematical basis for the process of model simulation of drilling operations

    Energy Technology Data Exchange (ETDEWEB)

    Lipovetskiy, G M; Lebedinskiy, G L

    1979-01-01

    The authors describe the application of a method for the model simulation of drilling operations and for the solution of problems concerned with the planning and management of such operations. A description is offered for an approach to the simulator process when the drilling operations are part of a large system. An algorithm is provided for calculating complex events.

  6. Solid Waste Operations Complex W-113, Detail Design Report (Title II). Volume 3: Specifications

    International Nuclear Information System (INIS)

    1995-09-01

    The Solid Waste Retrieval Facility--Phase 1 (Project W113) will provide the infrastructure and the facility required to retrieve from Trench 04, Burial ground 4C, contact handled (CH) drums and boxes at a rate that supports all retrieved TRU waste batching, treatment, storage, and disposal plans. This includes (1) operations related equipment and facilities, viz., a weather enclosure for the trench, retrieval equipment, weighing, venting, obtaining gas samples, overpacking, NDE, NDA, shipment of waste and (2) operations support related facilities, viz., a general office building, a retrieval staff change facility, and infrastructure upgrades such as supply and routing of water, sewer, electrical power, fire protection, roads, and telecommunication. Title I design for the operations related equipment and facilities was performed by Raytheon/BNFL, and that for the operations support related facilities including infrastructure upgrade was performed by KEH. These two scopes were combined into an integrated W113 Title II scope that was performed by Raytheon/BNFL. Volume 3 is a compilation of the construction specifications that will constitute the Title II materials and performance specifications. This volume contains CSI specifications for non-equipment related construction material type items, performance type items, and facility mechanical equipment items. Data sheets are provided, as necessary, which specify the equipment overall design parameters

  7. Solid Waste Operations Complex W-113, Detail Design Report (Title II). Volume 3: Specifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Solid Waste Retrieval Facility--Phase 1 (Project W113) will provide the infrastructure and the facility required to retrieve from Trench 04, Burial ground 4C, contact handled (CH) drums and boxes at a rate that supports all retrieved TRU waste batching, treatment, storage, and disposal plans. This includes (1) operations related equipment and facilities, viz., a weather enclosure for the trench, retrieval equipment, weighing, venting, obtaining gas samples, overpacking, NDE, NDA, shipment of waste and (2) operations support related facilities, viz., a general office building, a retrieval staff change facility, and infrastructure upgrades such as supply and routing of water, sewer, electrical power, fire protection, roads, and telecommunication. Title I design for the operations related equipment and facilities was performed by Raytheon/BNFL, and that for the operations support related facilities including infrastructure upgrade was performed by KEH. These two scopes were combined into an integrated W113 Title II scope that was performed by Raytheon/BNFL. Volume 3 is a compilation of the construction specifications that will constitute the Title II materials and performance specifications. This volume contains CSI specifications for non-equipment related construction material type items, performance type items, and facility mechanical equipment items. Data sheets are provided, as necessary, which specify the equipment overall design parameters.

  8. Complex use of heat-exchange tunnels

    Directory of Open Access Journals (Sweden)

    А. Ф. Галкин

    2017-04-01

    Full Text Available The paper presents separate results of complex research (experimental and theoretical on the application of heat-exchange tunnels – in frozen rocks, among other things – as underground constructions serving two purposes. It is proposed to use heat-exchange tunnels as a separate multi-functional module, which under normal conditions will be used to set standards of heat regime parameters in the mines, and in emergency situations, natural or man-made, will serve as a protective structure to shelter mine workers. Heat-exchange modules can be made from mined-out or specially constructed tunnels. Economic analysis shows that the use of such multi-functional modules does not increase operation and maintenance costs, but enhances safety of mining operations and reliability in case of emergency situations. There are numerous theoretic and experimental investigations in the field of complex use of mining tunnels, which allows to develop regulatory design documents on their basis. Experience of practical application of heat-exchange tunnels has been assessed from the position of regulating heat regime in the mines.

  9. N-Heterocyclic Carbene Complexes in Dehalogenation Reactions

    Science.gov (United States)

    Mas-Marzá, Elena; Page, Michael J.; Whittlesey, Michael K.

    Catalytic dehalogenation represents an underdeveloped transformation in M-NHC chemistry with a small number of reports detailing the reactivity of Co, Ru, Ni and Pd catalysts. In situ generated nickel and palladium NHC complexes catalyse the hydrodechlorination of aryl chlorides. Lower coordinate Ni complexes are proposed to operate in the hydrodefluorination of mono- and poly-fluorinated substrates. The single example of Ru-NHC catalysed hydrodefluorination of fully and partially fluorinated aromatic substrates is characterised by an unusual regioselectivity. The highly regioselective dehydrohalogenation of relatively unreactive alkyl halide substrates is achieved with a cobalt NHC catalyst.

  10. Military Operating Area Boundaries: Atlantic / Gulf of Mexico

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — An Operating Area (OPAREA) Complex boundary is the bounded area in which national defense training exercises and system qualification tests are routinely conducted....

  11. Modernisation of the CERN operational dosimetery system

    CERN Multimedia

    Caroline Duc

    2013-01-01

     As part of continual efforts to ensure the highest standards in the field of Radiation Protection, CERN is modernising its operational dosimetry system.   Pierre Carbonez, head of the Dosimetery and Instrument Calibration Service, with one of the new automatic operational dosimetery reader terminals. No more sheets of paper to record radiation doses at the entrance to the accelerators: the operational dosimetry system is being modernised! Since March, 50 automatic operational dosimeter reader terminals are in operation around the accelerator complex. Operational dosimeters (DMC) complement the "passive" dosimeters (DIS) and must be used every time you enter Controlled Radiation Areas. They measure the dose of radiation received by the exposed worker in real time and give a warning if the acceptable threshold is exceeded. The new dosimeter reader system allows the dosage recording procedure to be automated. “Every pers...

  12. Kinetic Line Voronoi Operations and Their Reversibility

    DEFF Research Database (Denmark)

    Mioc, Darka; Anton, François; Gold, Christopher

    2010-01-01

    In Geographic Information Systems the reversibility of map update operations has not been explored yet. In this paper we are using the Voronoi based Quad-edge data structure to define reversible map update operations. The reversibility of the map operations has been formalised at the lowest level...... mechanisms and dynamic map visualisations. In order to use the reversibility within the kinetic Voronoi diagram of points and open oriented line segments, we need to assure that reversing the map commands will produce exactly the changes in the map equivalent to the previous map states. To prove...... that reversing the map update operations produces the exact reverse changes, we show an isomorphism between the set of complex operations on the kinetic Voronoi diagram of points and open oriented line segments and the sets of numbers of new / deleted Voronoi regions induced by these operations, and its...

  13. Training aids: the motor operator valve trainer

    International Nuclear Information System (INIS)

    McCulloch, B.

    1987-01-01

    The spectrum of training aids used in the nuclear industry runs the gamut from the very basic (i.e., valve training aids - gate, globe, check) to the highly complex (i.e., nuclear full scope simulator). Designing and purchasing the best training aids take much time, detailed investigation, and good understanding of plant operations. The training aid that has given the New York Power Authority the best results has been the motor operator valve (MOV) trainer. Some of the items that make the MOV trainer a good choice are: (1) large number of MOVs in the plant, (2) importance of MOVs to safe plant operation, (3) detailed MOV procedures used by the plant, (4) history of MOV problems, and (5) ability to demonstrate important concepts and operation - hammer blow effect, torque and limit switch adjustment and functions, and actual sequence of operation of the limitorque valve operator

  14. Physical security technologies for weapons complex reconfiguration facilities

    International Nuclear Information System (INIS)

    Jaeger, C.D.

    1994-01-01

    Sandia National Laboratories was a member of the Weapons Complex Reconfiguration (WCR) Safeguards and Security (S ampersand S) team providing assistance to the Department of Energy's (DOE) Office of Weapons Complex Reconfiguration. The physical security systems in the new and upgraded facilities being considered for the WCR had to meet DOE orders and other requirements set forth in the WCR Programmatic Design Criteria (PDC), incorporate the latest physical security technologies using proven state-of-the-art systems and meet fundamental security principles. The outcome was to avoid costly retrofits and provide effective and comprehensive protection against current and projected threats with minimal impact on operations, costs and schedule. Physical security requirements for WCR facilities include: (1) reducing S ampersand S life-cycle costs, (2) where feasible automating S ampersand S functions to minimize operational costs, access to critical assets and exposure of people to hazardous environments, (3) increasing the amount of delay to outsider adversary attack, (4) compartmentalizing the facility to minimize the number of personnel requiring access to critical areas and (5) having reliable and maintainable systems. To be most effective against threats physical security must be integrated with facility operations, safety and other S ampersand S activities, such as material control and accountability, nuclear measurements and computer and information security. This paper will discuss the S ampersand S issues, requirements, technology opportunities and needs. Physical security technologies and systems considered in the design effort of the Weapons Complex Reconfiguration facilities will be reviewed

  15. Training of power plant operating personnel

    International Nuclear Information System (INIS)

    Kraftwerksschule, E.V.

    1986-01-01

    In Germany, professional training of power plant operating personnel became an important issue in the fifties, when power plant parameters as well as complexity of instrumentation and control increased considerably. Working Groups of VGB Technische Vereiningung der Grosskraftwerketreiber e.v. (Association of Large Power Plant Operators) developed a professional career for power plant operating personnel and defined pre-requisites, scope and objectives of training. In 1957 the German utilities founded KRAFTWERKSSCHULE E.V. (kws) as a school for theoretical training and for guidance of practical training in the power plants. KWS is a non-profit organisation and independent of authorities. Today KWS has 127 members in Germany and in 6 other countries. The objectives of KWS include the training of: -Kraftwerker (control room operators; - Kraftwerksmesiter (shift supervisors); and - shift engineers; according the guidelines of the VGB

  16. Metrical and dynamical aspects in complex analysis

    CERN Document Server

    2017-01-01

    The central theme of this reference book is the metric geometry of complex analysis in several variables. Bridging a gap in the current literature, the text focuses on the fine behavior of the Kobayashi metric of complex manifolds and its relationships to dynamical systems, hyperbolicity in the sense of Gromov and operator theory, all very active areas of research. The modern points of view expressed in these notes, collected here for the first time, will be of interest to academics working in the fields of several complex variables and metric geometry. The different topics are treated coherently and include expository presentations of the relevant tools, techniques and objects, which will be particularly useful for graduate and PhD students specializing in the area.

  17. Complex networks from multivariate time series

    Czech Academy of Sciences Publication Activity Database

    Paluš, Milan; Hartman, David; Vejmelka, Martin

    2010-01-01

    Roč. 12, - (2010), A-14382 ISSN 1607-7962. [General Asembly of the European Geophysical Society. 02.05.2010-07.05.2010, Vienna] R&D Projects: GA AV ČR IAA300420805 Institutional research plan: CEZ:AV0Z10300504 Keywords : complex network * surface air temperature * reanalysis data * global change Subject RIV: BB - Applied Statistics, Operational Research

  18. ASIC For Complex Fixed-Point Arithmetic

    Science.gov (United States)

    Petilli, Stephen G.; Grimm, Michael J.; Olson, Erlend M.

    1995-01-01

    Application-specific integrated circuit (ASIC) performs 24-bit, fixed-point arithmetic operations on arrays of complex-valued input data. High-performance, wide-band arithmetic logic unit (ALU) designed for use in computing fast Fourier transforms (FFTs) and for performing ditigal filtering functions. Other applications include general computations involved in analysis of spectra and digital signal processing.

  19. Economical motor transport operations

    Energy Technology Data Exchange (ETDEWEB)

    Cooke, P

    1979-09-01

    Motor transport is one area in a company where energy conservation is a function primarily of operative education and motivation rather than mechanical or technical control and monitoring. Unless the driver wants to save energy by proper operation of the vehicle, there is nothing the company can do to force him, whatever equipment it fits to the vehicles, or incentives it offers. This article gives an overview of the use of energy in road transport and examines a number of actions that can be taken to conserve energy. It discusses the question of the cost-effectiveness of transport energy conservation in the light of the complex issues involved. The problems and opportunities of implementing energy-saving programs are examined. (MCW)

  20. Research on Energy-Saving Operation Strategy for Multiple Trains on the Urban Subway Line

    Directory of Open Access Journals (Sweden)

    Jianqiang Liu

    2017-12-01

    Full Text Available Energy consumption for multiple trains on the urban subway line is predominantly affected by the operation strategy. This paper proposed an energy-saving operation strategy for multiple trains, which is suitable for various line conditions and complex train schedules. The model and operation modes of the strategy are illustrated in detail, aiming to take full use of regenerative braking energy in complex multi-train systems with different departure intervals and dwell times. The computing method is proposed by means of the heuristic algorithm to obtain the optimum operation curve for each train. The simulation result based on a real urban subway line is provided to verify the correctness and effectiveness of the proposed energy-saving operation strategy.