A Numerical Method for Computing Barge Impact Forces Based on Ultimate Strength of the Lashings between Barges

National Research Council Canada - National Science Library

Arroyo, Jose

2004-01-01

... of the barge train, the approach velocity, the approach angle, the barge train moment of inertia, damage sustained by the barge structure, and friction between the barge and the wall. computation...

Perancangan Propeler Self-Propelled Barge

Directory of Open Access Journals (Sweden)

Billy Teguh kurniawan

2013-03-01

Full Text Available Makalah ini menyampaikan suatu penelitian tentang perancangan propeler yang optimal beserta pemilihan daya mesin yang efisien pada self-propelled barge dengan memperhitungkan besarnya nilai tahanan dari barge tersebut. Dengan penambahan sistem propulsi, diharapkan barge dapat beroperasi dengan lebih efisien dibandingkan saat barge beroperasi menggunakan sistem towing atau ditarik tug boat. Perhitungan tahanan barge dilakukan menggunakan metode Holtrop dan Guldhammer-Harvald sehingga dapat diperhi-tungkan geometri dan jenis propeler yang optimal beserta daya mesin yang efisien untuk barge. Propeler yang dianalisis adalah propeler tipe B-Troost Series, sedangkan variasi yang dilakukan untuk perencanaan propeler pada kajian ini adalah variasi putaran propeler pada rentang antara 310-800 rpm, serta variasi jumlah daun pada rentang tiga, empat, lima, dan enam. Besarnya nilai tahanan self-propelled barge untuk metode Holtrop adalah 105.91 kilonewton, sedangkan hasil per-hitungan dari metode Guldhammer-Harvald didapatkan nilai sebesar 109.14 kilonewton. Tipe propeler yang dipilih setelah dilakukan uji kavitasi adalah tipe Troost Series B4-40, dengan diameter sebesar 2.1 m, efisiensi sebesar 0.421, pitch ratio se-besar 0.591, dengan putaran propeler 400 rpm. Daya mesin yg dibutuhkan barge pada kondisi maksimum (BHPMCR sebesar 1669.5 HP. Dengan mempertimbangkan daya tersebut, maka dipilih mesin jenis Caterpillar tipe Marine 3516B yang mem-punyai daya maksimum sebesar 1285 kilowatt atau 1722.5 horsepower dengan putaran mesin sebesar 1200 rpm

Preliminary Computational Fluid Dynamics (CFD) Simulation of EIIB Push Barge in Shallow Water

Science.gov (United States)

Beneš, Petr; Kollárik, Róbert

2011-12-01

This study presents preliminary CFD simulation of EIIb push barge in inland conditions using CFD software Ansys Fluent. The RANSE (Reynolds Averaged Navier-Stokes Equation) methods are used for the viscosity solution of turbulent flow around the ship hull. Different RANSE methods are used for the comparison of their results in ship resistance calculations, for selecting the appropriate and removing inappropriate methods. This study further familiarizes on the creation of geometrical model which considers exact water depth to vessel draft ratio in shallow water conditions, grid generation, setting mathematical model in Fluent and evaluation of the simulations results.

33 CFR 165.835 - Security Zone; Port of Mobile, Mobile Ship Channel, Mobile, AL.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zone; Port of Mobile, Mobile Ship Channel, Mobile, AL. 165.835 Section 165.835 Navigation and Navigable Waters COAST GUARD... § 165.835 Security Zone; Port of Mobile, Mobile Ship Channel, Mobile, AL. (a) Definition. As used in...

Babcock and Wilcox BR-100 100-ton rail/barge spent fuel shipping cask

International Nuclear Information System (INIS)

1990-02-01

This Preliminary Design Report (PDR) provides a detailed description of the design, analyses, and testing programs for the BR-100 cask. The BR-100 is a Type B(U) cask designed for transport by rail or barge. This report presents the preliminary analyses and tests which have been performed for the BR-100 and outlines the confirmatory analyses and tests which will be performed

Oysters as biomonitors of the apex barge oil spill

International Nuclear Information System (INIS)

Wade, T.L.; Jackson, T.J.; McDonald, T.J.; Wilkinson, D.L.; Brooks, J.M.

1993-01-01

The collision of the Greek tanker ship Shinoussa resulted in a spill of an estimated 692,000 gallons of catalytic feed stock oil into Galveston Bay on July 28, 1990. Oysters were collected from Galveston Bay Todds Dump (GBTD) 235 days previous to the spill and 6, 37, 132, and 495 days after the spill. Oysters were also collected from Galveston Bay Redfish Island (GBRI), a site known to be impacted by the spill, 37 and 110 days after the spill. The concentration of the 24 polynuclear aromatic hydrocarbons (PAH) measured for the National Oceanic and Atmospheric Administration's national status and trends program (NS ampersand T) site showed a sharp increase from about 100 ng/g to over 600 ng/g one week after the spill compared to concentrations 235 days previous to the spill. The concentration of the 24 NS ampersand T PAH in oysters from GBRI ranges from 400 to over 1000 ng/g. Soon after the spill the concentration of the 24 NS ampersand T PAH at Todds Dump decreased to levels not statistically different from prespill samples. However, analyses of alkylated and sulfur containing aromatic compounds indicate the oysters were still contaminated with Apex barge oil at least 37 and 110 days after the spill at GBTD and GBRI, respectively. Data from NS ampersand T sampling at GBTD more than a year after the spill (495 days) indicates the presence of alkylated aromatic hydrocarbons that may be from Apex barge oil still in the area. It appears that a sink of Apex barge oil (i.e., in sediments) may periodically be released by storms or other events into the ecosystem near GBTD. Therefore, bioavailable Apex barge oil is still present and may adversely affect oysters 495 days after the spill

Use of navigation channels by Lake Sturgeon: Does channelization increase vulnerability of fish to ship strikes?

Directory of Open Access Journals (Sweden)

Darryl W Hondorp

Full Text Available Channelization for navigation and flood control has altered the hydrology and bathymetry of many large rivers with unknown consequences for fish species that undergo riverine migrations. In this study, we investigated whether altered flow distributions and bathymetry associated with channelization attracted migrating Lake Sturgeon (Acipenser fulvescens into commercial navigation channels, potentially increasing their exposure to ship strikes. To address this question, we quantified and compared Lake Sturgeon selection for navigation channels vs. alternative pathways in two multi-channel rivers differentially affected by channelization, but free of barriers to sturgeon movement. Acoustic telemetry was used to quantify Lake Sturgeon movements. Under the assumption that Lake Sturgeon navigate by following primary flow paths, acoustic-tagged Lake Sturgeon in the more-channelized lower Detroit River were expected to choose navigation channels over alternative pathways and to exhibit greater selection for navigation channels than conspecifics in the less-channelized lower St. Clair River. Consistent with these predictions, acoustic-tagged Lake Sturgeon in the more-channelized lower Detroit River selected the higher-flow and deeper navigation channels over alternative migration pathways, whereas in the less-channelized lower St. Clair River, individuals primarily used pathways alternative to navigation channels. Lake Sturgeon selection for navigation channels as migratory pathways also was significantly higher in the more-channelized lower Detroit River than in the less-channelized lower St. Clair River. We speculated that use of navigation channels over alternative pathways would increase the spatial overlap of commercial vessels and migrating Lake Sturgeon, potentially enhancing their vulnerability to ship strikes. Results of our study thus demonstrated an association between channelization and the path use of migrating Lake Sturgeon that could prove

Market Anatomy of a Drought: Modeling Barge and Corn Market Adaptation to Reduced Rainfall and Low Mississippi River Water Levels During the 2012 Midwestern U.S. Drought

Science.gov (United States)

Foster, B.; Characklis, G. W.; Thurman, W. N.

2015-12-01

for keeping shipping channels open during drought, the results of this work should help them to decide how different interventions might benefit or hurt barge operators and/or corn sellers.

Investigation of the hydrodynamic model test of forced rolling for a barge using PIV

Directory of Open Access Journals (Sweden)

WANG Xiaoqiang

2017-03-01

Full Text Available In order to study the physical details of viscous flow in ship roll motions and improve the accuracy of ship roll damping numerical simulation, the application of the Particle Image Velocimetry (PIV technique is investigated in model tests of forced ship rolling in calm water. The hydrodynamic force and flow field at the bilge region are simultaneously measured for barges at different amplitudes and frequencies in which the self-made forced rolling facility was used. In the model test, the viscous flow variation with the time around the bilge region was studied during ship rolling motion. The changes in ship roll damping coefficients with the rolling amplitude and period were also investigated. A comparison of the model test results with the Computational Fluid Dynamics(CFDresults shows that the numerical ship roll damping coefficients agree well with the model test results, while the differences in the local flow details exist between the CFD results and model test results. Further research into the model test technique and CFD application is required.

Ship Lock as General Queuing System with Batch Arrivals and Batch Service

Directory of Open Access Journals (Sweden)

Zoran Radmilović

2007-11-01

Full Text Available The real lock operations with ships and barge convoys areconsidered dependent on the transport technologies applied, ormore precisely, the kinds of ships/convoys requiring thelockage. The fleet can be divided as follows: (1 groups of singleships, (2 pushed and pulled tows of barges and (3 differentcombinations of previous systems (1 and (2. The groups ofships and tows passing through the lock have extremely stochasticcharacteristics thus forming various arrivals and setvicetime patterns. It means that uniform navigation or strongscheduling between locks and lock operations are not possibleeven though highly sophisticated equipment is at disposal.Therefore, in this paper an analytical method was developedusing bulk queuing systems for the analysis and planning oflock requirements supporting it with numerical example. Thedeveloped methodology can be applied to determine the meanqueue length of ships - convoys at lock anchorage, withoutblocking behaviour between upstream and downstream navigationfor single-lane traffic.

An Optimization Model For Strategy Decision Support to Select Kind of CPO’s Ship

Science.gov (United States)

Suaibah Nst, Siti; Nababan, Esther; Mawengkang, Herman

2018-01-01

The selection of marine transport for the distribution of crude palm oil (CPO) is one of strategy that can be considered in reducing cost of transport. The cost of CPO’s transport from one area to CPO’s factory located at the port of destination may affect the level of CPO’s prices and the number of demands. In order to maintain the availability of CPO a strategy is required to minimize the cost of transporting. In this study, the strategy used to select kind of charter ships as barge or chemical tanker. This study aims to determine an optimization model for strategy decision support in selecting kind of CPO’s ship by minimizing costs of transport. The select of ship was done randomly, so that two-stage stochastic programming model was used to select the kind of ship. Model can help decision makers to select either barge or chemical tanker to distribute CPO.

Ecological evaluation of proposed dredged material from the John F. Baldwin Ship Channel: Phase 3 -- biological testing

Energy Technology Data Exchange (ETDEWEB)

Kohn, N.P.; Karle, L.M.; Pinza, M.R.; Mayhew, H.L.; White, P.J.; Gruendell, B.D.; Word, J.Q. [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1993-10-01

The John F. Baldwin Ship Channel is a 28-mile-long portion of the San Francisco Bay to Stockton Ship Channel, the primary shipping lane through San Francisco Bay and Delta. The San Francisco District of the US Army Corps of Engineers (USACE) is responsible for construction of the John F. Baldwin Ship Channel, which is authorized to be deepened to a project depth of {minus}45 ft relative to mean lower low water (MLLW). Approximately 8.5 million cubic yards (mcy) of sediment will be removed from the channel to reach this project depth. The USACE requested Battelle/Marine Sciences Laboratory (MSL) to conduct testing for ocean disposal under the guidelines in Evaluation of Dredged Material Proposed for Ocean Disposal-Testing Manual (EPA/USACE 1991). This testing manual contains a tiered evaluation approach developed specifically for ocean disposal of dredged material at a selected site. In this study, John F. Baldwin Ship Channel sediments were evaluated under the Tier III (biological) testing guidance, which is considered to be highly stringent and protective of the environment. The Tier III guidance for ocean disposal testing requires tests of water column effects, (following dredged material disposal), deposited sediment toxicity, and bioaccumulation of contaminants from deposited sediment (dredged material).

Effect of Water Flows on Ship Traffic in Narrow Water Channels Based on Cellular Automata

Directory of Open Access Journals (Sweden)

Hu Hongtao

2017-11-01

Full Text Available In narrow water channels, ship traffic may be affected by water flows and ship interactions. Studying their effects can help maritime authorities to establish appropriate management strategies. In this study, a two-lane cellular automation model is proposed. Further, the behavior of ship traffic is analyzed by setting different water flow velocities and considering ship interactions. Numerical experiment results show that the ship traffic density-flux relation is significantly different from the results obtained by classical models. Furthermore, due to ship interactions, the ship lane-change rate is influenced by the water flow to a certain degree.

78 FR 53285 - Seagoing Barges

Science.gov (United States)

2013-08-29

...) exemption, or as a rational business decision meant to facilitate the barge's anticipated near-term use for... 100 gross tons making voyages beyond the statutorily defined Boundary Line.\\1\\ In 1997, the Coast... of ``seagoing barge,'' (``a non- self-propelled vessel of at least 100 gross tons . . . making...

Advanced marine reactor MRX and application to nuclear barge supplying electricity and heat

International Nuclear Information System (INIS)

Ishida, Toshihisa; Kusunoki, Tsuyoshi; Odano, Naoteru; Yoritsune, Tsutomu; Fukuhara, Yoshifumi; Ochiai, Masa-aki

2000-01-01

The basic design concept of an advanced marine reactor MRX has been established with adoption of several new technologies. The MRX is an integral-type PWR with 100 MWt aimed basically for use of ship propulsion. Adoption of a water-filled containment together with the integral type reactor makes the reactor light-weight and compact greatly. A engineered safety system is a simplified passive system, function of which is confirmed by the safety analysis. The MRX can be applied to an energy supply system of electricity and heat co-generation by installing it on a barge. Concept of a nuclear barge with the MRX of 334 MWt output is presented for use of supplying electricity, fresh water and hot water. Combined system of electric generation and desalination with the RO process can deliver variable output of electricity and fresh water according a demand. Latent heat of the exhausted steam from the turbine can be used effectively to raise the temperature of cold water as heat supply. (author)

33 CFR 167.405 - Off San Francisco: Main ship channel.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Off San Francisco: Main ship channel. 167.405 Section 167.405 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas...

The Houston Ship Channel security: a case study

Science.gov (United States)

Le, Han Q.; Bellamy, P. A.; Pei, S. S. S.

2007-04-01

The Houston Ship Channel (HSC) is a 50-mile long shipping channel that contains many private ports including the Port of Houston Authority. It has a uniquely critical role with respect to the US petroleum energy supply. The HSC security is currently planned for significant enhancement under the auspices of the Harris County and the Houston-based Port Strategic Security Council. The ultimate objective is to comprehensively address the HSC threat matrix. This paper describes the technical effort in support of this program. The HSC security is a complex system of systems that includes the physical control access system, the command, control, communication, and information (C4I) system, and the telecom infrastructure. The strategy is to coordinate the improvements of different components to achieve a high-impact net effectiveness. A key element is a planned high-capacity backbone optical network for integrating the C4I of many different HSC administrative-jurisdictional authorities, which will allow unified situational awareness for a more effective cooperation and coordination. Enhancement of surveillance and intrusion protection is crucial. A feasibility study was conducted for the HSC assuming common surveillance technologies including visible/IR camera, radar, and sonar. The method includes survey and theoretical modeling to detect threats of concern in the HSC natural environment. The result indicates that the HSC unique river-like geography offers both advantages and challenges. The narrow channel allows ease of waterside surveillance, but likely incurs high cost for its great length. In addition, landside security is also important owing to its location amidst urban-industrial zone. Lastly, limitation of the various technologies is discussed by considering the broader challenges of the intrusion problem.

Ship localization in Santa Barbara Channel using machine learning classifiers.

Science.gov (United States)

Niu, Haiqiang; Ozanich, Emma; Gerstoft, Peter

2017-11-01

Machine learning classifiers are shown to outperform conventional matched field processing for a deep water (600 m depth) ocean acoustic-based ship range estimation problem in the Santa Barbara Channel Experiment when limited environmental information is known. Recordings of three different ships of opportunity on a vertical array were used as training and test data for the feed-forward neural network and support vector machine classifiers, demonstrating the feasibility of machine learning methods to locate unseen sources. The classifiers perform well up to 10 km range whereas the conventional matched field processing fails at about 4 km range without accurate environmental information.

Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility.

Energy Technology Data Exchange (ETDEWEB)

Pratt, Joseph William [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Harris, Aaron P. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2013-01-01

A barge-mounted hydrogen-fueled proton exchange membrane (PEM) fuel cell system has the potential to reduce emissions and fossil fuel use of maritime vessels in and around ports. This study determines the technical feasibility of this concept and examines specific options on the U.S. West Coast for deployment practicality and potential for commercialization.The conceptual design of the system is found to be straightforward and technically feasible in several configurations corresponding to various power levels and run times.The most technically viable and commercially attractive deployment options were found to be powering container ships at berth at the Port of Tacoma and/or Seattle, powering tugs at anchorage near the Port of Oakland, and powering refrigerated containers on-board Hawaiian inter-island transport barges. Other attractive demonstration options were found at the Port of Seattle, the Suisun Bay Reserve Fleet, the California Maritime Academy, and an excursion vessel on the Ohio River.

Determination of barge impact probabilities for bridge design : [summary].

Science.gov (United States)

2016-04-01

University of Florida researchers developed a revised barge impact probability expression applicable for the design of bridge structures located on Florida waterways. University of Florida researchers obtained barge flotilla traffic data and barge-to...

Submergible barge retrievable storage and permanent disposal system for radioactive waste

Science.gov (United States)

Goldsberry, Fred L.; Cawley, William E.

1981-01-01

A submergible barge and process for submerging and storing radioactive waste material along a seabed. A submergible barge receives individual packages of radwaste within segregated cells. The cells are formed integrally within the barge, preferably surrounded by reinforced concrete. The cells are individually sealed by a concrete decking and by concrete hatch covers. Seawater may be vented into the cells for cooling, through an integral vent arrangement. The vent ducts may be attached to pumps when the barge is bouyant. The ducts are also arranged to promote passive ventilation of the cells when the barge is submerged. Packages of the radwaste are loaded into individual cells within the barge. The cells are then sealed and the barge is towed to the designated disposal-storage site. There, the individual cells are flooded and the barge will begin descent controlled by a powered submarine control device to the seabed storage site. The submerged barge will rest on the seabed permanently or until recovered by a submarine control device.

Attribution of atmospheric sulfur dioxide over the English Channel to dimethyl sulfide and changing ship emissions

Science.gov (United States)

Yang, Mingxi; Bell, Thomas G.; Hopkins, Frances E.; Smyth, Timothy J.

2016-04-01

Atmospheric sulfur dioxide (SO2) was measured continuously from the Penlee Point Atmospheric Observatory (PPAO) near Plymouth, United Kingdom, between May 2014 and November 2015. This coastal site is exposed to marine air across a wide wind sector. The predominant southwesterly winds carry relatively clean background Atlantic air. In contrast, air from the southeast is heavily influenced by exhaust plumes from ships in the English Channel as well as near Plymouth Sound. A new International Maritime Organization (IMO) regulation came into force in January 2015 to reduce the maximum allowed sulfur content in ships' fuel 10-fold in sulfur emission control areas such as the English Channel. Our observations suggest a 3-fold reduction in ship-emitted SO2 from 2014 to 2015. Apparent fuel sulfur content calculated from coincidental SO2 and carbon dioxide (CO2) peaks from local ship plumes show a high level of compliance to the IMO regulation (> 95 %) in both years (˜ 70 % of ships in 2014 were already emitting at levels below the 2015 cap). Dimethyl sulfide (DMS) is an important source of atmospheric SO2 even in this semi-polluted region. The relative contribution of DMS oxidation to the SO2 burden over the English Channel increased from about one-third in 2014 to about one-half in 2015 due to the reduction in ship sulfur emissions. Our diel analysis suggests that SO2 is removed from the marine atmospheric boundary layer in about half a day, with dry deposition to the ocean accounting for a quarter of the total loss.

Comparison of shipping, handling, and shock instrumentation results for two 3.5-m-class primary mirrors

Science.gov (United States)

Killpatrick, Don H.; Mayo, James W.

1998-08-01

Packing, shipping, and handling procedures employed during several transportation activities for two large telescope primary mirrors are presented along with detailed shock recording results. Operations monitored included craning, forklifting, and shipping by air, sea, and land during all phases of manufacture and installation. The mirrors monitored were the SOR 3.5-m Telescope spun cast borosilicate primary mirror and the AEOS 3.67-m Telescope Zerodur thin meniscus primary mirror. Shock recording instrumentation included 2-, 5-, and 10-g Omni-G(superscript TM) impact indicators, 10-g Impact o-graph(superscript TM) 3-axis recording accelerometers, and high-resolution 3-axis accelerometers with Astromed Dash 8 eight-channel chart recorders and audio indicators. Shock results for some operations were monitored to the 0.01-g level. In-shipment temperature data are also presented and discussed. Effects of lifting operations, road conditions via truck, flight conditions via C-5B aircraft, and transportation via sea- going barge are discussed. Data are presented for three different crate designs and configurations and, in some cases, include mirror-in-cell shipping data. Shock results were observed from as low as a few hundredths-g to over 3- g's during various operations.

By ship, by barge, by truck : massive Kearl modules to take a new route from South Korea to Alberta via Idaho and Montana highways

Energy Technology Data Exchange (ETDEWEB)

Jaremko, D.

2010-03-15

Idaho and Montana highways will be used to transport massive oil sands modules for Imperial Oil's Kearl oilsands project. A test module will pass through the states in mid 2010. The local highway patrol will be contracted as an escort in order to reduce the risk of incidents with local drivers. The modules will be shipped from South Korea to Portland and then transported by barge to Lewiston, Idaho. The modules will then be loaded onto trucks and transported along the highway. It will take approximately 10 days to move the modules to the Kearl site near Fort McMurray, Alberta. The loads are so large that they will not fit through rail tunnels or highway overpasses. Imperial Oil will be required to bury some overhead power transmission lines and build approximately 100 pullouts along the route. Traffic signal arms will also be modified to swing out of the way as the loads are passing through. Construction of the Kearl site will be completed by 2012. 2 figs.

A study for bank effect on ship traffic in narrow water channels using cellular automata

Science.gov (United States)

Sun, Zhuo; Cong, Shuang; Pan, Junnan; Zheng, Jianfeng

2017-12-01

In narrow water channels, bank might affect nearby ships due to hydrodynamic forces (bank effect). To avoid accidents, different sailing rules (i.e., lane-changing, speed control) are required. In this paper, a two-lane cellular automata model is proposed to evaluate such phenomena. Numerical experiments show that ships will form a “slow-moving chunk” in the bank area, which will significantly block the flux. As further study demonstrated to alleviate bank effect, ship speed and bank length should be controlled.

Effects of ship motions on laminar flow in tubes

Energy Technology Data Exchange (ETDEWEB)

Yan, B.H., E-mail: yanbh1986@163.co [Department of Nuclear Science and Engineering, Naval University of Engineering, 717 Jiefang Street, Wuhan 430033 (China); Yu, L. [Department of Nuclear Science and Engineering, Naval University of Engineering, 717 Jiefang Street, Wuhan 430033 (China); Yang, Y.H. [School of Nuclear Science and Engineering, Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai 200240 (China)

2010-01-15

The thermal-hydraulics of barge-mounted floating nuclear desalination plants is the incentive for this study. Laminar flow in tubes in heaving motion is modeled. The friction factor and heat transfer coefficient are obtained. All the equations of laminar flow in steady state are applicable for heeling motion. The effect of ship motions on the laminar developing region is also analyzed. The ship motions can weaken the boundary layer in the laminar developing region and strengthen the laminar frictional resistance. The effect of ship motions on the instability of laminar flow is also investigated. The ship motions do not affect the instability point, but they can shorten the distance between the instability point and the transition point, and cause the transition from laminar flow to turbulent flow to occur earlier.

Utilization of nuclear technology to ship

International Nuclear Information System (INIS)

Kim, H. C.

2004-01-01

The SMART, a medium sized power plant with an output of 330mwth, can be used on barges to generate electric power and water, and can be used to propel container ships. For high speed, to secure the container cargo, and huge container carriers, to lower the operating expenses, the use of nuclear power reactor is essential. To compete in this challenging area with the advanced countries, a well-orchestrated joint effort will be necessary by the government and the industries

Intermodal Barge Transport : Network Design, Nodes and Competitiveness

NARCIS (Netherlands)

Konings, J.W.

2009-01-01

The thesis addresses the opportunities and conditions to increase the market share of intermodal barge transport in Northwest Europe. In particular, it focuses on strategies to improve the performances of the different links of the intermodal transport chain: the barge transport services, the

Which future for conventional pipeline laying barges?; Quel avenir pour les barges de pose de pipelines conventionnelles ?

Energy Technology Data Exchange (ETDEWEB)

Borelli, A.; Perinet, D. [ETPM International (International organizations without location)

1997-05-01

The aim of this paper is to study the evolution of conventional pipeline laying barges. The past and todays capacities of some barges are presented in order to follow the evolution of their equipments with time to answer the market needs. The second part outlines the main characteristics of todays market needs. Different analyses are made according to the different means of pipeline laying: conventional, flexible pipes and rigid pipes using unrolling technique. Market trends in these 3 domains show a sensible growth from 1996 to 1997 and are assumed to keep a sustained level during the following years. However, the tendency shows an evolution towards smaller diameter pipes and greater depths. The last part concerns the evolution of laying barges. The most important improvements in pipeline laying industry concern the dynamic positioning, the laying techniques (`S` laying technique), and the rate of laying using real-time control techniques. (J.S.)

Effects of barge traffic on distribution and survival of ichthyoplankton and small fishes in the upper Mississippi River

Science.gov (United States)

Holland, L.E.

1986-01-01

Short-term impacts of commercial barge traffic on fish eggs, larvae, young-of-the-year (age-0) fishes, and small adults in the main channel of the upper Mississippi River were examined. Barge passages caused significant changes in the distribution of eggs and larvae in the study area. The mean catch of ichthyoplankton was reduced in both surface and bottom waters for 90 min after passage of vessels downstream. The effects of upstream traffic on catch ranged from nil in surface or bottom samples to short-term increases in surface samples immediately after passage. No consistent effect on the catch of age-0 or small adult fishes in surface or bottom trawls was evident.

Characterizing spatial variability of air pollution from vehicle traffic around the Houston Ship Channel area

Science.gov (United States)

Zhang, Xueying; Craft, Elena; Zhang, Kai

2017-07-01

Mobile emissions are a major source of urban air pollution and have been associated with a variety of adverse health outcomes. The Houston Ship Channel area is the home of a large number of diesel-powered vehicles emitting fine particulate matter (PM2.5; ≤2.5 μm in aerodynamic diameter) and nitrogen oxides (NOx). However, the spatial variability of traffic-related air pollutants in the Houston Ship Channel area has rarely been investigated. The objective of this study is to characterize spatial variability of PM2.5 and NOx concentrations attributable to on-road traffic in the Houston Ship Channel area in the year of 2011. We extracted the road network from the Texas Department of Transportation Road Inventory, and calculated emission rates using the Motor Vehicle Emission Simulator version 2014a (MOVES2014a). These parameters and preprocessed meteorological parameters were entered into a Research LINE-source Dispersion Model (RLINE) to conduct a simulation. Receptors were placed at 50 m resolution within 300 m to major roads and at 150 m resolution in the rest of the area. Our findings include that traffic-related PM2.5 were mainly emitted from trucks, while traffic-related NOx were emitted from both trucks and cars. The traffic contributed 0.90 μg/m3 PM2.5 and 29.23 μg/m3 NOx to the annual average mass concentrations of on-road air pollution, and the concentrations of the two pollutants decreased by nearly 40% within 500 m distance to major roads. The pollution level of traffic-related PM2.5 and NOx was higher in winter than those in the other three seasons. The Houston Ship Channel has earlier morning peak hours and relative late afternoon hours, which indicates the influence of goods movement from port activity. The varied near-road gradients illustrate that proximities to major roads are not an accurate surrogate of traffic-related air pollution.

Barge mounter ISER [intrinsically safe and economical reactor

International Nuclear Information System (INIS)

Kuwahara, Shin-ichi

1985-01-01

A forum in Japan has developed a new nuclear power plant ISER, a modified version of PIUS. ISER employs a conventional steel pressure vessel instead of PCRV used in the PIUS, thus allows the barge-mounted plant. This document introduces the concept of the barge-mounted ISER with its construction and siting

33 CFR 165.808 - Corpus Christi Ship Channel, Corpus Christi, TX, safety zone.

Science.gov (United States)

2010-07-01

... Petroleum Gas, the waters within a 500 yard radius of the LPG carrier while the vessel transits the Corpus Christi Ship Channel to the LPG receiving facility. The safety zone remains in effect until the LPG vessel is moored at the LPG receiving facility. (2) For outgoing tank vessels loaded with LPG, the waters...

Balanced and sparse Tamo-Barg codes

KAUST Repository

Halbawi, Wael

2017-08-29

We construct balanced and sparse generator matrices for Tamo and Barg\\'s Locally Recoverable Codes (LRCs). More specifically, for a cyclic Tamo-Barg code of length n, dimension k and locality r, we show how to deterministically construct a generator matrix where the number of nonzeros in any two columns differs by at most one, and where the weight of every row is d + r - 1, where d is the minimum distance of the code. Since LRCs are designed mainly for distributed storage systems, the results presented in this work provide a computationally balanced and efficient encoding scheme for these codes. The balanced property ensures that the computational effort exerted by any storage node is essentially the same, whilst the sparse property ensures that this effort is minimal. The work presented in this paper extends a similar result previously established for Reed-Solomon (RS) codes, where it is now known that any cyclic RS code possesses a generator matrix that is balanced as described, but is sparsest, meaning that each row has d nonzeros.

A decision support system for real-time management of dissolvedoxygen in the Stockton deep water ship channel

Energy Technology Data Exchange (ETDEWEB)

Quinn, N.W.T.; Chen, Carl W.; Stringfellow, William T.

2003-07-16

A decision support system(DSS)is under development to assistin the control and management of episodes of dissolved oxygen sag in aDeep Water Ship Channel (DWSC), located in Stockton, California. The DWSCwas formed by excavating the bed of the San Joaquin River in the 1950'sto allow navigation by ocean-going cargo ships to the Port of Stockton.The deepened channel has the effect of increasing hydraulic residencetime by a factor of ten. allowing accumulation of decaying algae andother oxygen demanding substances - which creates a barrier to themigration of anadromous fish. This problem, which manifests itself inlate summer and early autumn, is an impediment to a multimillion dollarhabitat restoration effort for the salmon fishery in the San JoaquinRiver basin (SJRB). A hydrodynamic and water quality model of the Deltaand San Joaquin River forms the basis of the DSS which will provideforecasts of dissolved oxygen sag in the DWSC and provide modelingsupport for management actions such as forced aeration to improvedissolved oxygen concentrations in the Ship Channel. A graphical userinterlace, currently used for displaying flow and salinity forecasts onthe San Joaquin River, is being adapted to allow the display of dissolvedoxygen forecasts and to encourage the formation of a stakeholder-ledentity or institution to adaptively manage the problem.

75 FR 13645 - Inventory of U.S.-Flag Launch Barges

Science.gov (United States)

2010-03-22

... Qualified Launch Barges, the Interim Final Rule requires that the Maritime Administration publish a notice... DEPARTMENT OF TRANSPORTATION Maritime Administration [Docket No. MARAD-2010 0023] Inventory of U.S.-Flag Launch Barges AGENCY: Maritime Administration, Department of Transportation. ACTION: Inventory of...

Decommission of nuclear ship 'MUTSU'

International Nuclear Information System (INIS)

Tateyama, Takeshi

1996-01-01

The nuclear-powered ship 'MUTSU' was decommissioned by removing the reactor room in June 1995, which was hoisted and transported by a floating crane to a shore storage room at Sekinehama, Aomori Prefecture. This work was carried out in three stages: extraction of the spent fuel assemblies and neutron sources, dismantling of the machinery in the reactor auxiliary room, and separation and transportation of the reactor together with the secondary shielding structure and surrounding hull. IHI mainly conducted the third stage work. The separation work of the reactor room structure using a semisubmersible barge is outlined. Stress analysis and design of the reactor room for lifting work is also described. (author)

75 FR 18755 - Security Zone; Calcasieu River and Ship Channel, LA

Science.gov (United States)

2010-04-13

...The Coast Guard is disestablishing the permanent safety zone at Trunkline LNG in Lake Charles, LA and replacing it with a security zone with new boundaries. The Coast Guard is also establishing two additional permanent security zones on the waters of the Calcasieu River for the mooring basins at Cameron LNG in Hackberry, LA and PPG Industries in Lake Charles, LA. The Coast Guard is also disestablishing the Calcasieu River ship channel moving safety zone and replacing it with a moving security zone. The revised moving security zone extends channel edge to channel edge on the Calcasieu Channel and shoreline to shoreline on the Calcasieu River, 2 miles ahead and 1 mile astern of certain designated vessels while in transit on the Calcasieu Channel or Calcasieu River. Meeting, crossing or overtaking situations are not permitted within the security zone unless specifically authorized by the Captain of the Port. The moving security zone may commence at any point while certain vessels are transiting the Calcasieu Channel or Calcasieu River on U.S. territorial waters (12 nautical miles) in the Captain of the Port (COTP) Port Arthur zone. These security zones are needed to protect vessels, waterfront facilities, the public, and other surrounding areas from destruction, loss, or injury caused by sabotage, subversive acts, accidents, or other actions of a similar nature. Unless exempted under this rule, entry into or movement within these security zones is prohibited without permission from the Captain of the Port or a designated representative.

Methods for estimating risks to nuclear power plants from shipping

International Nuclear Information System (INIS)

Walker, D.H.; Hartman, M.G.; Robbins, T.R.

1975-01-01

Nuclear power plants sited on land near shipping lanes or offshore can be exposed to potential risks if there is nearby ship or barge traffic which involves the transport of hazardous cargo. Methods that have been developed for estimating the degree of risk are summarized. Of concern are any accidents which could lead to a release or spill of the hazardous cargo, or to an explosion. A probability of occurrence of the order of 10 -7 per year is a general guideline which has been used to judge whether or not the risk from hazards created by accidents is acceptable. This guideline has been followed in the risk assessment discussed in this paper. 19 references

Regional Sediment Management Studies of Matagorda Ship Channel and Matagorda Bay System, Texas

Science.gov (United States)

2013-08-01

undisturbed free water surface.” The USACE presently has no standardized method to measure the fluid mud to determine nautical depth. The Engineer Manual...structural member in the bottom of the hull and channel bottom) is used to account for parameters such as ship motion from waves, squat , safety...distance between the nautical bottom and undisturbed free water surface. To complete the definition of nautical bottom, the physical characteristic(s) on

An Analysis Nomoto Gain and Norbin Parameter on Ship Turning Maneuver

Directory of Open Access Journals (Sweden)

Aulia Siti Aisjah

2010-05-01

Full Text Available First order approach of maneuvering ship model developed by Nomoto, that has commonly underpinned researchers on mathematical models of ship maneuvering, is employed by the present research in order to describe the results of Nomoto validation gain value from some type of ships. In this present study, the controls are designated using FLC, while the rules are derived from FLC; furthermore, the reference is the LQG/LTR. On the other pole, Norbin parameters are obtained under the bases of the gain and time constant output control response. Validation of Nomoto gain value is obtained through the calculation of the value of a constant gain, settling time of the first order response, and approach value toward damping ratio and natural frequency response of the system used to control the output of the second order pattern. Validation is employed on 20 types of ships with a length between 40-350 meters; as a result, it is figured out that at the Low Speed General Cargo ship, Mariner, RO/RO, and Barge Carrier have good maneuverability compared to the other 17 types of ships.

Tier I ecological evaluation for phase III channel improvements to the John. F. Baldwin ship channel

Energy Technology Data Exchange (ETDEWEB)

Bienert, R.W.; Shreffler, D.K.; Word, J.Q.; Kohn, N.P. [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1994-05-01

To assist the US Army Corps of Engineers (USACE) in determing whether the material from proposed dredging of the John F. Baldwin Ship Channel (JFBSC) is suitable for unrestricted, unconfined open-ocean disposal, Battelle/Marine Sciences Laboratory (MSL) prepared this report. Based on these findings, sediments that would be removed during Phase III improvements to the JFBSC fail to meet the three suitability criteria for open-ocean disposal. Firstly, fine-grained sediments comprise a significant fraction of the bottom material in some areas of the channel, and this material is not exposed to high current or wave energy. Dredged material from the JFBSC is not being proposed for beach nourishment; therefore the second criterion is not met. JFBSC sediments do not meet the third criterion because, although they may be substantially similar to substrates at several of the proposed disposal sites, they are from an area that historically has experienced loading of contaminants, which toxicology studies have shown have the potential to result in acute toxicity or significant bioaccumulation.

Barged/In-river steelhead migrant data - Evaluation of methods to reduce straying rates of barged juvenile steelhead

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The goals of this study are to develop methods to reduce wandering and straying of steelhead (Oncorhynchus mykiss) that are collected and barged from the Snake River...

33 CFR 163.05 - Tows of seagoing barges within inland waters.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Tows of seagoing barges within inland waters. 163.05 Section 163.05 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... inland waters. (a) The tows of seagoing barges when navigating the inland waters of the United States...

49 CFR 176.174 - Transport of Class 1 (explosive) materials in shipborne barges.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Transport of Class 1 (explosive) materials in... REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Class 1 (Explosive) Materials Cargo Transport Units and Shipborne Barges § 176.174 Transport of Class 1 (explosive) materials in shipborne barges. (a...

Using service-time profiles for distributed planning of container barge rotations along terminals

NARCIS (Netherlands)

Douma, A.M.; Schuur, Peter; Schutten, Johannes M.J.

2008-01-01

We consider the barge rotation planning and quay scheduling problem in the Port of Rotterdam. This problem concerns the alignment of barge rotations and terminal quay schedules. We use a Multi-Agent based approach for the problem, since such a Multi-Agent based system can mirror to a large extent

Balanced and sparse Tamo-Barg codes

KAUST Repository

Halbawi, Wael; Duursma, Iwan; Dau, Hoang; Hassibi, Babak

2017-01-01

We construct balanced and sparse generator matrices for Tamo and Barg's Locally Recoverable Codes (LRCs). More specifically, for a cyclic Tamo-Barg code of length n, dimension k and locality r, we show how to deterministically construct a generator matrix where the number of nonzeros in any two columns differs by at most one, and where the weight of every row is d + r - 1, where d is the minimum distance of the code. Since LRCs are designed mainly for distributed storage systems, the results presented in this work provide a computationally balanced and efficient encoding scheme for these codes. The balanced property ensures that the computational effort exerted by any storage node is essentially the same, whilst the sparse property ensures that this effort is minimal. The work presented in this paper extends a similar result previously established for Reed-Solomon (RS) codes, where it is now known that any cyclic RS code possesses a generator matrix that is balanced as described, but is sparsest, meaning that each row has d nonzeros.

A mixed integer linear programming model applied in barge planning for Omya

Directory of Open Access Journals (Sweden)

David Bredström

2015-12-01

Full Text Available This article presents a mathematical model for barge transport planning on the river Rhine, which is part of a decision support system (DSS recently taken into use by the Swiss company Omya. The system is operated by Omya’s regional office in Cologne, Germany, responsible for distribution planning at the regional distribution center (RDC in Moerdijk, the Netherlands. The distribution planning is a vital part of supply chain management of Omya’s production of Norwegian high quality calcium carbonate slurry, supplied to European paper manufacturers. The DSS operates within a vendor managed inventory (VMI setting, where the customer inventories are monitored by Omya, who decides upon the refilling days and quantities delivered by barges. The barge planning problem falls into the category of inventory routing problems (IRP and is further characterized with multiple products, heterogeneous fleet with availability restrictions (the fleet is owned by third party, vehicle compartments, dependency of barge capacity on water-level, multiple customer visits, bounded customer inventories and rolling planning horizon. There are additional modelling details which had to be considered to make it possible to employ the model in practice at a sufficient level of detail. To the best of our knowledge, we have not been able to find similar models covering all these aspects in barge planning. This article presents the developed mixed-integer programming model and discusses practical experience with its solution. Briefly, it also puts the model into the context of the entire business case of value chain optimization in Omya.

Trends in oil spills from tanker ships 1995-2004

International Nuclear Information System (INIS)

Huijer, K.

2005-01-01

The trends in oil spills around the world over from 1995 to 2004 were examined and analyzed for possible influences on spill volumes and frequencies for incidents of 3 spill size classes. The International Tanker Owners Pollution Federation (ITOPF) has maintained a database since 1974 of all oil spills from tankers, combined carriers and barges. The number of oil spills has decreased significantly in the last 30 years despite a steady increase in maritime oil trade since the 1980s. The recent trends were identified by causes, locations, oil type, and shipping legislation. The causes include ship loading/discharging, bunkering, collisions, groundings, hull failures and fires. The types of oil spilt include bunker, crude, cargo fuel, white product and some unknowns. It was concluded that the decline in oil spills is due to a range of initiatives taken by governments and the shipping industry rather than any one factor. Some notable influences towards reduced number of spills include: the international convention for the prevention of pollution from ships of 1972, as modified by the Protocol of 1978; the international convention for the safety of life at sea of 1974; and the Oil Pollution Act of 1990. Results of investigations into the causes of spills serve the purpose of informing the international process to further prevent and reduce marine oil pollution due to tankers. 7 refs., 5 tabs., 12 figs

The structures of colour string for e+e- → qq-barg and υ → 3g

International Nuclear Information System (INIS)

Tian Lili; Xie Qubing; Si Zongguo

1993-01-01

In Lund model, the explanation of e + e - → qq-barg → 3 jets and υ → 3g → h's is based on applying Lund string fragmentation model to their assumed structures of colour string for qq-barg and 3g systems. In this paper, starting from the colour wave functions of qq-barg and 3 g systems, we study these colour string structures by QCD directly. The results reveal the reasonableness and accuracy of Lund string pictures

ERDC Ship/Tow Simulator

Data.gov (United States)

Federal Laboratory Consortium — Performing Advanced Hydrodynamic ModelingEngineers and ship pilots can now overcome the challenges of evaluating navigation channel designs, modifications and safety...

Potential barge transportation for inbound corn and grain

Science.gov (United States)

1997-12-31

This research develops a model for estimating future barge and rail rates for decision making. The Box-Jenkins and the Regression Analysis with ARIMA errors forecasting methods were used to develop appropriate models for determining future rates. A s...

Nizhny Novgorod Belyana barge in the XIX century

Directory of Open Access Journals (Sweden)

Philippov Yury V.

2015-01-01

Full Text Available The article discusses a unique Belyana barge, which was built in the Nizhny Novgorod region for several centuries. Belyana as a type of vessels was designed for transportation of logs, sleepers, beams, planks and other forest products from the Upper to the Lower Volga. Originally, the center of Belyana construction was the village of Baki, which was situated on the Vetluga River, a tributary of the Volga River. The Belyana construction technique spread from the Vetluga river banks further to Nizhny Novgorod, and then to Perm region. Almost all aspects of Belyana construction starting from the logging finishing with its floating to the lower Volga, and also cost of transported products in the prices of the XIX century are disclosed. Due to Belyana is truly a popular invention, it was built by traditional methods, relying solely on the centuries-old experience. Any drawings for the construction never existed, that’s why the author relied on preserved photographs and drawings in the historical reconstruction of this unique vessel. At the beginning of the article a brief overview of the geographical location of Nizhny Novgorod, as well as the names of wooden ships which were sailing on Volga and its tributaries in the same times with Belyana are given. At the end of the article practical recommendations on possible reconstruction of Belyana and using it as an interactive museum of ethnography are given.

A static analysis method for barge impact design of bridges with consideration of dynamic amplification : summary.

Science.gov (United States)

2009-11-01

Several hundred Florida bridges span waterways deep enough for barge traffic. To ensure a bridge is capable of withstanding the potential impact of a barge collision, engineers use design specifications recommended by the American Association of Stat...

New start of nuclear-powered ship 'Mutsu'. 2. On decommissioning works

International Nuclear Information System (INIS)

Matsuo, Ryusuke

1996-01-01

It was decided that 'Mutsu' is decommissioned immediately after the finish of the experimental voyage in the fundamental plan. Therefore, Nuclear-powered Ship Decommissioning Department was organized in Japan Atomic Energy Research Institute in 1992, and the investigation was begun on the measures to abolish the reactor facilities of 'Mutsu'. The fundamental plan was decided to adopt the removal and isolation method for the reactor room including the reactor and shields, to use the ship as the conventional propulsion ocean research ship, and to exhibit the removed reactor chamber under proper control. The required technical assessment and safety examination were carried out based on this fundamental plan. The technical feasibility studies were carried out on the safety of placing 'Mutsu' on a semisubmersible barge, the safety of the cutting works of the hull, the safety of a floating crane, and the safety at the time of accidents. Taking-out of fuel assemblies, the removal works of machinery and equipment in the reactor auxiliary machine room and others, the removal and transport works of the reactor room in a lump, the construction works of the preservation building, and the safety control on the decommissioning works are described. (K.I.)

Coupled Loads Analysis of the Modified NASA Barge Pegasus and Space Launch System Hardware

Science.gov (United States)

Knight, J. Brent

2015-01-01

A Coupled Loads Analysis (CLA) has been performed for barge transport of Space Launch System hardware on the recently modified NASA barge Pegasus. The barge re-design was facilitated with detailed finite element analyses by the ARMY Corps of Engineers - Marine Design Center. The Finite Element Model (FEM) utilized in the design was also used in the subject CLA. The Pegasus FEM and CLA results are presented as well as a comparison of the analysis process to that of a payload being transported to space via the Space Shuttle. Discussion of the dynamic forcing functions is included as well. The process of performing a dynamic CLA of NASA hardware during marine transport is thought to be a first and can likely support minimization of undue conservatism.

33 CFR 157.460 - Additional operational requirements for tank barges.

Science.gov (United States)

2010-07-01

... OF HOMELAND SECURITY (CONTINUED) POLLUTION RULES FOR THE PROTECTION OF THE MARINE ENVIRONMENT... Hulls Carrying Petroleum Oils § 157.460 Additional operational requirements for tank barges. (a...

Preliminary assessment of costs and risks of transporting spent fuel by barge

International Nuclear Information System (INIS)

Tobin, R.L.; Meshkov, N.K.; Jones, R.H.

1985-12-01

The purpose of this study is to analyze the costs and risks associated with transporting spent fuel by barge. The barge movements would be made in combination with rail movements to transport spent fuel from plants to a repository. For the purpose of this analysis, three candidate repository sites are analyzed: Yucca Mountain, Nevada, Deaf Smith, Texas, and Hanford, Washington. This report complements a report prepared by Sandia National Laboratories in 1984 that analyzes the costs and risks of transporting spent fuel by rail and by truck to nine candidate repository sites

Design features of SMART for barge mounted application

International Nuclear Information System (INIS)

Doo-Jeong Lee; Ju-Hyeon Yoon; Ju-Pyung Kim; Jong-In Kim; Moon-Hee Chang

2000-01-01

SMART is an integral reactor of 330 MWt capacity with passive safety features being developed for a wide range of applications including the barge mounted co-generation plant. Its design strives to combine the firmly-established commercial reactor design with new advanced technologies. Thus the use of the industry proven KOFA (Korea Optimized Fuel Assembly) based nuclear fuels is pursued while such radically new technologies as self-pressurizing pressurizer, helical once-through steam generators, and advanced control concepts are being developed. The safety of SMART centers around enhancing the inherent safety characteristics of the reactor and salient features include low core power density, integral arrangement to eliminate large break loss of coolant accident, etc. The progression of emergency situations into accidents is prevented with a number of advanced engineered safety features such as Passive Residual Heat Removal System, Passive Emergency Core Cooling System, Safeguard Vessel, Passive Containment Over-pressure Protection. This paper presents the status of current SMART development, characteristics of SMART safety systems and the possibility of SMART application to barge mounted environment. (author)

46 CFR 56.01-1 - Scope (replaces 100.1).

Science.gov (United States)

2010-10-01

... ships' and barges' piping systems and appurtenances. (b) The respective piping systems installed on ships and barges shall have the necessary pumps, valves, regulation valves, safety valves, relief valves... operation of the vessel. (c) Piping for industrial systems on mobile offshore drilling units need not fully...

Probability and risk criteria for channel depth design and channel operation

CSIR Research Space (South Africa)

Moes, H

2008-05-01

Full Text Available The paper reviews the various levels of probability of bottom touching and risk criteria which are being used. This leads to a relationship between the statistically expected number of vertical ship motions in the channel during a single shipping...

46 CFR 151.10-20 - Hull construction.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Hull construction. 151.10-20 Section 151.10-20 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Barge Hull Construction Requirements § 151.10-20 Hull construction. (a) Construction features. (1) Each barge hull shall be constructed with a suitable bow form...

76 FR 20080 - Inventory of U.S.-Flag Launch Barges

Science.gov (United States)

2011-04-11

... Administration publish a notice in the Federal Register requesting that owners or operators (or potential owners... DEPARTMENT OF TRANSPORTATION Maritime Administration [Docket Number MARAD 2011 0030] Inventory of U.S.-Flag Launch Barges AGENCY: Maritime Administration, Department of Transportation. ACTION...

Time Domain Response Analysis of Barge Floater Supporting an Offshore Wind Turbine

Directory of Open Access Journals (Sweden)

A.C. Mayilvahanan

2011-12-01

Full Text Available Wind energy is a reliable source of sustainable power generation and has been an active area of research globally to economically harness the energy for human use. Reliable source of wind energy pushed the engineers to install wind turbines near and far off the coasts. In shallow water upto 100 m, fixed structures like tripods, jackets, monopiles and gravity base are functionally and economically feasible. In deep waters, a floating substructure can be more economical for offshore wind turbine. In this study a barge type floater of different aspect ratios from 0.4 to 1.0 is investigated for its performance under wave and wind loading. All these floaters were designed with a defined transverse metacentric height (GM equal to 1.0 m and the hydrodynamic analysis is carried out using WAMIT. The barge with aspect ratio B/L = 1.0 is found to have lowest pitch RAO. The time domain surge, heave and pitch response for this barge has been obtained using Integro-differential equation of motion and the statistical response characteristics are compared for two different cases of excitation namely, wave excitation alone and combined wave and wind excitation. Statistics of surge, heave and pitch responses are obtained for three different seas states and for two different wave heading angles.

7 CFR 984.472 - Reports of merchantable walnuts shipped.

Science.gov (United States)

2010-01-01

... MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE... shipped; whether they were shipped into domestic or export channels; and for exports, the quantity by... remainder of that marketing year. (b) Reports of walnuts purchased directly from growers by handlers who are...

Preliminary design report: Babcock and Wilcox BR-100 100-ton rail/barge spent fuel shipping cask

International Nuclear Information System (INIS)

1990-02-01

The purpose of this document is to provide information on burnup credit as applied to the preliminary design of the BR-100 shipping cask. There is a brief description of the preliminary basket design and the features used to maintain a critically safe system. Following the basket description is a discussion of various criticality analyses used to evaluate burnup credit. The results from these analyses are then reviewed in the perspective of fuel burnups expected to be shipped to either the final repository or a Monitored Retrievable Storage (MRS) facility. The hurdles to employing burnup credit in the certification of any cask are then outlines and reviewed. the last section gives conclusions reached as to burnup credit for the BR-100 cask, based on our analyses and experience. All information in this study refers to the cask configured to transport PWR fuel. Boiling Water Reactor (BWR) fuel satisfies the criticality requirements so that burnup credit is not needed. All calculations generated in the preparation of this report were based upon the preliminary design which will be optimized during the final design. 8 refs., 19 figs., 16 tabs

Dark matter at the SHiP experiment

International Nuclear Information System (INIS)

Timiryasov, Inar

2016-01-01

We study prospects of dark matter searches in the SHiP experiment. SHiP (Search for Hidden Particles) is the recently proposed fixed target experiment which will exploit the high-intensity beam of 400 GeV protons from the CERN SPS. In addition to the hidden sector detector, SHiP will be equipped with the ν_τ detector, which presumably would be sensitive to dark matter particles. We describe appropriate production and detection channels and estimate SHiP’s sensitivity for a scalar dark matter coupled to the Standard model through the vector mediator

Matagorda Ship Channel, Texas: Jetty Stability Study

National Research Council Canada - National Science Library

Kraus, Nicholas C; Lin, Lihwa; Batten, Brian K; Brown, Gary L

2006-01-01

.... The current has produced a large area of scour on the bay side of the inlet adjacent to the west jetty, and vessels encountering a strong along-channel and cross-channel current at the entrance...

40 CFR 63.8985 - Am I subject to this subpart?

Science.gov (United States)

2010-07-01

... unit into a tank truck, rail car, ship, or barge, along with the piping and other equipment in HCl... produced in the HCl production unit is loaded into a tank truck, rail car, ship, or barge, at the point the... sources within a contiguous area under common control that emits or has the potential to emit any single...

An Advanced Control Technique for Floating Offshore Wind Turbines Based on More Compact Barge Platforms

Directory of Open Access Journals (Sweden)

Joannes Olondriz

2018-05-01

Full Text Available Hydrodynamic Floating Offshore Wind Turbine (FOWT platform specifications are typically dominated by seaworthiness and maximum operating platform-pitch angle-related requirements. However, such specifications directly impact the challenge posed by an FOWT in terms of control design. The conventional FOWT systems are typically based on large, heavy floating platforms, which are less likely to suffer from the negative damping effect caused by the excessive coupling between blade-pitch control and platform-pitch motion. An advanced control technique is presented here to increase system stability for barge type platforms. Such a technique mitigates platform-pitch motions and improves the generator speed regulation, while maintaining blade-pitch activity and reducing blade and tower loads. The NREL’s 5MW + ITI Energy barge reference model is taken as a basis for this work. Furthermore, the capabilities of the proposed controller for performing with a more compact and less hydrodynamically stable barge platform is analysed, with encouraging results.

Heave motion prediction of a large barge in random seas by using artificial neural network

Science.gov (United States)

Lee, Hsiu Eik; Liew, Mohd Shahir; Zawawi, Noor Amila Wan Abdullah; Toloue, Iraj

2017-11-01

This paper describes the development of a multi-layer feed forward artificial neural network (ANN) to predict rigid heave body motions of a large catenary moored barge subjected to multi-directional irregular waves. The barge is idealized as a rigid plate of finite draft with planar dimensions 160m (length) and 100m (width) which is held on station using a six point chain catenary mooring in 50m water depth. Hydroelastic effects are neglected from the physical model as the chief intent of this study is focused on large plate rigid body hydrodynamics modelling using ANN. Even with this assumption, the computational requirements for time domain coupled hydrodynamic simulations of a moored floating body is considerably costly, particularly if a large number of simulations are required such as in the case of response based design (RBD) methods. As an alternative to time consuming numerical hydrodynamics, a regression-type ANN model has been developed for efficient prediction of the barge's heave responses to random waves from various directions. It was determined that a network comprising of 3 input features, 2 hidden layers with 5 neurons each and 1 output was sufficient to produce acceptable predictions within 0.02 mean squared error. By benchmarking results from the ANN with those generated by a fully coupled dynamic model in OrcaFlex, it is demonstrated that the ANN is capable of predicting the barge's heave responses with acceptable accuracy.

Industrial, agricultural, and petroleum contaminants in cormorants wintering near the Houston Ship Channel, Texas, USA

Science.gov (United States)

King, K.A.; Stafford, C.J.; Cain, B.W.; Mueller, A.J.; Hall, H.D.

1987-01-01

Double-crested cormorants (Phalacrocorax auritus ) collected in the Houston Ship Channel, Texas, USA, in November shortly after their fall migration contained residues of several industrial, agricultural, and petroleum contaminants including polychlorinated styrenes (PCS's), polychlorinated biphenyls (PCB's), DDE, and petroleum hydrocarbons. PCS concentrations in over-wintering birds collected in late February were three times higher than those in birds collected in November. PCB and petroleum concentrations remained at about the same level throughout the 3-month winter period. Petroleum hydrocarbons were present in all cormorants and residues in some individuals exceeded 25 ppm (wet weight). Mean DDE residues in samples collected in November and February were less than 1 ppm. Low concentrations of five other organochlorine compounds, not detected in cormorants collected in November, were recovered in birds collected in February.

From automatic control of vessels designed to operate in offshore conditions to automatic control of a large barge convoy in a river/channel: lessons learned; Do controle automatico de embarcacoes projetadas para condicoes operacionais de offshore para o controle automatico de um grande comboio de barcacas em um rio/canal: licoes aprendidas

Energy Technology Data Exchange (ETDEWEB)

Pontes, Anselmo Carvalho [Symmetry Ltda., Rio de Janeiro, RJ (Brazil); Santos, Edson Mesquita do [Marinha do Brasil, Rio de Janeiro, RJ (Brazil)

2008-07-01

The waterway transportation sector, despite its problems and bottlenecks, is continually seeking alternatives to improve its operations. With goals of increased efficiency, safety and cost reduction, the sector is modernizing and acquiring new technology. The Dynamic Position control system for a large barge convoy is one of the new technology highlights. This innovation may make development in the Brazilian waterway transportation sector feasible by permitting navigational safety and greater flexibility in transport and distribution not only for mined products but for petroleum and its derivatives. This paper presents the development process of The Dynamic Position control system for a large barge convoy in the Parana-Paraguay River, for Rio Tinto Mining Company. The hydrodynamics effects in a river are quite different than those of the traditional offshore environment. The degree of difficulty involved in solving this problem is highly dependent on a ship's characteristics, which can be analyzed in function of their hydrodynamic coefficients. Model tests in towing tanks were made to adjust the hydrodynamic coefficients and characteristics of the thrusters. The choice of the 'backstepping' control law and observer (state estimator) presented in this paper is a result of these particular conditions. The authors point out the advantage of using this technique, since all the properties of the coefficients of the hull, propeller(s) and thruster(s) have already been tested and tuned and are able to make a reliable set-up that optimizes navigation in restricted waterways. (author)

77 FR 23119 - Annual Marine Events in the Eighth Coast Guard District, Smoking the Sound; Biloxi Ship Channel...

Science.gov (United States)

2012-04-18

...The Coast Guard will enforce Special Local Regulations for the Smoking the Sound boat races in the Biloxi Ship Channel, Biloxi, MS from 8 a.m. until 6 p.m. on April 28 and April 29, 2012. This action is necessary for the safeguard of participants and spectators, including all crews, vessels, and persons on navigable waters during the Smoking the Sound boat races. During the enforcement period, entry into, transiting or anchoring in the regulated area is prohibited to all vessels not registered with the sponsor as participants or official patrol vessels, unless specifically authorized by the Captain of the Port (COTP) Mobile or the designated Coast Guard Patrol Commander.

Use of Infrasound for evaluating potentially hazardous conditions for barge transit on the Mississippi River at Vicksburg, Mississippi

Science.gov (United States)

McKenna, M. H.; Simpson, C. P.; Jordan, A. M.

2017-12-01

Navigating the Mississippi River in Vicksburg, MS is known to be difficult for barge traffic in even the best of conditions due to the river's sharp bend 2 km north of the Highway 80 Bridge. When river levels rise, the level of difficulty in piloting barges under the bridge rises. Ongoing studies by the U.S. Army Engineer Research and Development Center (ERDC) are investigating infrasound as a means to correlate the low frequency acoustics generated by the river with the presence of hazardous conditions observed during flood stage, i.e., rough waters and high currents, which may lead to barge-bridge impacts. The Denied Area Monitoring and Exploitation of Structures (DAMES) Array at the ERDC Vicksburg, MS campus is a persistent seismic-acoustic array used for structural monitoring and explosive event detection. The DAMES Array is located 4.3 km from the Mississippi River/Highway 80 Bridge junction and recorded impulsive sub-audible acoustic signals, similar to an explosive event, from barge-bridge collisions that occurred between 2011 and 2017. This study focuses on five collisions that occurred during January 2016, which resulted in closing the river for barge transit and the Highway 80 Bridge for rail transit for multiple days until safety inspections were completed. The Highway 80 Bridge in Vicksburg, MS is the only freight-crossing over the Mississippi River between Baton Rouge, LA and Memphis, TN, meaning delays from these closings have significant impacts on all transit of goods throughout the Southeastern United States. River basin data and regional meteorological data have been analyzed to find correlations between the river conditions in January 2016, and recorded infrasound data with the aim of determining the likelihood that hazardous conditions are present on the river. Frequency-wavenumber analysis was used to identify the transient signals associated with the barge-bridge impacts and calculate the backazimuth to their source. Then, with the use of

An Adaptive Ship Detection Scheme for Spaceborne SAR Imagery

Directory of Open Access Journals (Sweden)

Xiangguang Leng

2016-08-01

Full Text Available With the rapid development of spaceborne synthetic aperture radar (SAR and the increasing need of ship detection, research on adaptive ship detection in spaceborne SAR imagery is of great importance. Focusing on practical problems of ship detection, this paper presents a highly adaptive ship detection scheme for spaceborne SAR imagery. It is able to process a wide range of sensors, imaging modes and resolutions. Two main stages are identified in this paper, namely: ship candidate detection and ship discrimination. Firstly, this paper proposes an adaptive land masking method using ship size and pixel size. Secondly, taking into account the imaging mode, incidence angle, and polarization channel of SAR imagery, it implements adaptive ship candidate detection in spaceborne SAR imagery by applying different strategies to different resolution SAR images. Finally, aiming at different types of typical false alarms, this paper proposes a comprehensive ship discrimination method in spaceborne SAR imagery based on confidence level and complexity analysis. Experimental results based on RADARSAT-1, RADARSAT-2, TerraSAR-X, RS-1, and RS-3 images demonstrate that the adaptive scheme proposed in this paper is able to detect ship targets in a fast, efficient and robust way.

Ship Emission Inventories in Estuary of the Yangtze River Using Terrestrial AIS Data

Directory of Open Access Journals (Sweden)

Xin Yao

2016-12-01

Full Text Available Estuary forms a transition zone between inland river and open sea. In China, the estuary of the Yangtze River plays a vital role in connecting the inland and oversea shipping, and witnesses heavy vessel traffic in the recent decades. Nowadays, more attentions have been directed to the issue of ship pollution in busy waterways. In order to investigate the ship emission inventory, this paper presents an Automatic Identification System(AIS based method. AIS data is the realistic data of vessel traffic including dynamic information (position, speed, course, etc. and static information (ship type, dimensions, name, etc.. According to ship dimensions, the power of engines is estimated for different ship types. By using AIS based bottom-up approach, ship emission inventories and shares of air pollutants and GHGs (Greenhouse gases are developed. Spatial distribution of ship emissions is illustrated in the form of heat map. As a case study, the emission inventories are analyzed using AIS data of 2010 in the estuary, and following results are made:(1 shares of the emission are cruise ships 6.59%, bulk carriers 5.16%, container ships 52.96%, tankers 15.16%, fishing ships 9.16%, other ships 10.97%; (2 CO2 is the dominant part of the emission. (3 Areas of highest emission intensity are generally clustered around the South Channel, the North Channel and ports in the vicinity. The proposed method is promising because it is derived from the AIS data which contains not only real data of individual ship but also vessel traffic situation in the study area. It can server as a reference for other researchers and policy makers working in this field.

7 CFR 800.97 - Weighing grain in containers, land carriers, barges, and shiplots.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Weighing grain in containers, land carriers, barges... (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Weighing Provisions and Procedures § 800.97 Weighing grain in...

Channel Access Algorithm Design for Automatic Identification System

Institute of Scientific and Technical Information of China (English)

Oh Sang-heon; Kim Seung-pum; Hwang Dong-hwan; Park Chan-sik; Lee Sang-jeong

2003-01-01

The Automatic Identification System (AIS) is a maritime equipment to allow an efficient exchange of the navigational data between ships and between ships and shore stations. It utilizes a channel access algorithm which can quickly resolve conflicts without any intervention from control stations. In this paper, a design of channel access algorithm for the AIS is presented. The input/output relationship of each access algorithm module is defined by drawing the state transition diagram, dataflow diagram and flowchart based on the technical standard, ITU-R M.1371. In order to verify the designed channel access algorithm, the simulator was developed using the C/C++ programming language. The results show that the proposed channel access algorithm can properly allocate transmission slots and meet the operational performance requirements specified by the technical standard.

Analysis Of Inland Waterway Transport For Container Shipping: Cikarang To Port Of TanjungPriok

Science.gov (United States)

Achmadi, T.; Nur, H. I.; Rahmadhon, L. R.

2018-03-01

Industry's development which is in the center of Cikarang's industrial estate causes a considerable increase from 7% to 13% of container's flow from and to Port of Tanjung Priok per year. Therefore, those obstacles rise the number of traffic congestion and transport cost. This research aims to analyze the potential alternative of transportation in order to transport containers at the route of Tanjung Priok to Cikarang utilizing Inland Waterways Transport through Cikarang Bekasi Laut (CBL) river. This research will be conducted by comparing component of total logistic cost that emerging caused by container trucks and vessels. Self Propelled Container Barge (SPCB) is a pointed alternative transportation in which it is used to transport containers through the waterways. The result of analysis obtained that the capacity of Cikarang Bekasi Laut river is 18,558 roundtrip per year. Furthermore, the collaboration of 3 SPCB operations, as well payload 32 TEUS can decrease the amount of road traffic congestion/density of Cikarang-Port of Tanjung Priok as much as 18.6%. The cost of containers shipping per unit transported by truck is IDR 2.2 Million per TEUs, whereas containers shipping transported by Inland Waterways cost only IDR 1.8 Million per TEUs.

Advanced Whale Detection Methods to Improve Whale-Ship Collision Avoidance

Science.gov (United States)

McGillivary, P. A.; Tougher, B.

2010-12-01

Collisions between whales and ships are now estimated to account for fully a third of all whale deaths worldwide. Such collisions can incur costly ship repairs, and may damage or disable ship steering requiring costly response efforts from state and federal agencies. While collisions with rare whale species are problematic in further reducing their low population numbers, collisions with some of the more abundant whale species are also becoming more common as their populations increase. The problem is compounded as ship traffic likewise continues to grow, thus posing a growing risk to both whales and ships. Federal agencies are considering policies to alter shipping lanes to minimize whale-ship collisions off California and elsewhere. Similar efforts have already been undertaken for the Boston Harbor ship approach, where a bend in the shipping lane was introduced to reduce ship traffic through a favorite area of the highly endangered North Atlantic Right Whale. The Boston shipping approach lane was also flanked with a system of moorings with whale detection hydrophones which broadcast the presence of calling whales in or near the ship channel to approaching ships in real time. When so notified, ships can post lookouts to avoid whale collisions, and reduce speed to reduce the likelihood of whale death, which is highly speed dependent. To reduce the likelihood and seriousness of whale-ship collisions off California and Alaska in particular, there is a need to better know areas of particularly high use by whales, and consider implementation of reduced ship speeds in these areas. There is also an ongoing discussion of altering shipping lanes in the Santa Barbara Channel to avoid habitual Blue whales aggregation areas in particular. However, unlike the case for Boston Harbor, notification of ships that whales are nearby to reduce or avoid collisions is complicated because many California and Alaska whale species do not call regularly, and would thus be undetected by

Torres Strait: A channel clearing project

International Nuclear Information System (INIS)

Bankert, Stanley

1970-01-01

The Torres Strait is a reef-laden stretch of water lying south of New Guinea and north of the tip of the Cape York Peninsula of northeastern Australia. Because of its location and geologic structure it is particularly hazardous to shipping, and limits passage through the area. It was suggested that nuclear explosives might be used to create a safe shipping channel through the strait, and in this paper that possibility will be explored. While the construction of the Torres Strait Channel appears feasible from both a technical and an economic point of view, a great deal of further research will have to be done in a number of areas. The Channel would be a great economic boost to northwestern Australia and to trade between southeast Asia and Australia, but its effect on the Great Barrier Reef and the people of the region will require serious consideration

Torres Strait: A channel clearing project

Energy Technology Data Exchange (ETDEWEB)

Bankert, Stanley [Department of Applied Science, University of California - Davis (United States)

1970-05-15

The Torres Strait is a reef-laden stretch of water lying south of New Guinea and north of the tip of the Cape York Peninsula of northeastern Australia. Because of its location and geologic structure it is particularly hazardous to shipping, and limits passage through the area. It was suggested that nuclear explosives might be used to create a safe shipping channel through the strait, and in this paper that possibility will be explored. While the construction of the Torres Strait Channel appears feasible from both a technical and an economic point of view, a great deal of further research will have to be done in a number of areas. The Channel would be a great economic boost to northwestern Australia and to trade between southeast Asia and Australia, but its effect on the Great Barrier Reef and the people of the region will require serious consideration.

Ship for the cleaning of water from oil, fuel oil, and other floating objects

Energy Technology Data Exchange (ETDEWEB)

Nentvih, V

1969-12-31

The newly designed ship for the cleaning of water surface from floating pollution has its bow section built much lower than its main hull. A slanted platform leads to a channel guiding the water into a centrifuge which separates oil from water. Oil proceeds to a reservoir for reprocessing while water is discharged from the ship. A variable ballast controls the depth of submersion of the platform. The ship is equilibrated by means of a built-in air float.

Coupled Responses of Sewol, Twin Barges and Slings During Salvage

Science.gov (United States)

Yao, Zong; Wang, Wei-ping; Jiang, Yan; Chen, Shi-hai

2018-04-01

Korean Sewol is successfully lifted up with the strand jack system based on twin barges. During the salvage operation, two barges and Sewol encounter offshore environmental conditions of wave, current and wind. It is inevitable that the relative motions among the three bodies are coupled with the sling tensions, which may cause big dynamic loads for the lifting system. During the project engineering phase and the site operation, it is necessary to build up a simulation model that can precisely generate the coupled responses in order to define a suitable weather window and monitor risks for the salvage operation. A special method for calculating multibody coupled responses is introduced into Sewol salvage project. Each body's hydrodynamic force and moment in multibody configuration is calculated in the way that one body is treated as freely moving in space, while other bodies are set as fixed globally. The hydrodynamic force and moment are then applied into a numerical simulation model with some calibration coefficients being inserted. These coefficients are calibrated with the model test results. The simulation model built up this way can predict coupled responses with the similar accuracy as the model test and full scale measurement, and particularly generate multibody shielding effects. Site measured responses and the responses only resulted from from the simulation keep project management simultaneously to judge risks of each salvage stage, which are important for success of Sewol salvage.

Green Shipping Practices of Shipping Firms

Directory of Open Access Journals (Sweden)

Young-Tae Chang

2017-05-01

Full Text Available The primary objective of this study is to provide an empirical research using structural equation modeling to identify the factors that motivate shipping firms to adopt green shipping practices (GSP. Furthermore, it also examines if adopting GSP can enhance the shipping firms’ environmental and productivity performance. The findings show that shipping firms are motivated to adopt GSP mostly by industrial norms set by institutionalized associations. They are also motivated by customers’ demand for environmental friendliness and their own strategy to make good image. Unlike our expectation, government regulations and international environmental laws are not significant in influencing shipping firms to adopt GSP. Moreover, adoption of green shipping practices can improve the environmental and productivity performance of the shipping firms.

Multiple-Criteria Decision-Making in the Design of Innovative Lock Walls for Barge Impact; Phase 1

National Research Council Canada - National Science Library

Lambert, James

2001-01-01

.... This research project consists of two phases: Phase 1, which culminates with this report, investigated the use of multiple-criteria decision-making in the design process of lock approach walls to consider barge impact and earthquake loads...

Significance of Waterway Navigation Positioning Systems On Ship's Manoeuvring Safety

Science.gov (United States)

Galor, W.

The main goal of navigation is to lead the ship to the point of destination safety and efficiently. Various factors may affect ship realisating this process. The ship movement on waterway are mainly limited by water area dimensions (surface and depth). These limitations cause the requirement to realise the proper of ship movement trajectory. In case when this re requirement cant't fulfil then marine accident may happend. This fact is unwanted event caused losses of human health and life, damage or loss of cargo and ship, pollution of natural environment, damage of port structures or blocking the port of its ports and lost of salvage operation. These losses in same cases can be catas- trophical especially while e.i. crude oil spilling could be place. To realise of safety navigation process is needed to embrace the ship's movement trajectory by waterways area. The ship's trajectory is described by manoeuvring lane as a surface of water area which is require to realise of safety ship movement. Many conditions affect to ship manoeuvring line. The main are following: positioning accuracy, ship's manoeuvring features and phenomena's of shore and ship's bulk common affecting. The accuracy of positioning system is most important. This system depends on coast navigation mark- ing which can range many kinds of technical realisation. Mainly used systems based on lights (line), radionavigation (local system or GPS, DGPS), or radars. If accuracy of positiong is higer, then safety of navigation is growing. This article presents these problems exemplifying with approaching channel to ports situated on West Pomera- nian water region.

BR-100 spent fuel shipping cask development

International Nuclear Information System (INIS)

McGuinn, E.J.; Childress, P.C.

1990-01-01

Continued public acceptance of commercial nuclear power is contingent to a large degree on the US Department of Energy (DOE) establishing an integrated waste management system for spent nuclear fuel. As part of the from-reactor transportation segment of this system, the B ampersand W Fuel Company (BWFC) is under contract to the DOE to develop a spent-fuel cask that is compatible with both rail and barge modes of transportation. Innovative design approaches were the keys to achieving a cask design that maximizes payload capacity and cask performance. The result is the BR-100, a 100-ton rail/barge cask with a capacity of 21 PWR or 52 BWR ten-year cooled, intact fuel assemblies. 3 figs

Laboratory data on Snake River steelhead - Evaluation of methods to reduce straying rates of barged juvenile steelhead

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The goals of this study are to develop methods to reduce wandering and straying of steelhead (Oncorhynchus mykiss) that are collected and barged from the Snake River...

Elements of a decision support system for real-time management ofdissolved oxygen in the San Joaquin River deep water ship channel

Energy Technology Data Exchange (ETDEWEB)

Quinn, N.W.T.; Jacobs, Karl; Chen, Carl W.; Stringfellow, WilliamT.

2004-07-15

A decision support system (DSS) has been designed and will be implemented over the next three years to assist in the control and management of episodes of low dissolved oxygen (DO) in a Deep Water Ship Channel (DWSC), located near Stockton, California. The DSS integrates three information technology functions. The first part is the collection and management of data on flow, pollution loads and water quality. The second part is the simulation model which can forecast the dissolved oxygen sag in the DWSC and determine management actions necessary to improve dissolved oxygen concentrations. The third part is the graphical user interface, which facilitates the computer simulations and posting of the forecasted dissolved oxygen and remedial measures to a stakeholder group for implementations.

Ship-induced solitary Riemann waves of depression in Venice Lagoon

Energy Technology Data Exchange (ETDEWEB)

Parnell, Kevin E. [College of Marine and Environmental Sciences and Centre for Tropical Environmental and Sustainability Sciences, James Cook University, Queensland 4811 (Australia); Institute of Cybernetics at Tallinn University of Technology, Akadeemia tee 21, 12618 Tallinn (Estonia); Soomere, Tarmo, E-mail: soomere@cs.ioc.ee [Institute of Cybernetics at Tallinn University of Technology, Akadeemia tee 21, 12618 Tallinn (Estonia); Estonian Academy of Sciences, Kohtu 6, 10130 Tallinn (Estonia); Zaggia, Luca [Institute of Marine Sciences, National Research Council, Castello 2737/F, 30122 Venice (Italy); Rodin, Artem [Institute of Cybernetics at Tallinn University of Technology, Akadeemia tee 21, 12618 Tallinn (Estonia); Lorenzetti, Giuliano [Institute of Marine Sciences, National Research Council, Castello 2737/F, 30122 Venice (Italy); Rapaglia, John [Sacred Heart University Department of Biology, 5151 Park Avenue, Fairfield, CT 06825 (United States); Scarpa, Gian Marco [Università Ca' Foscari, Dorsoduro 3246, 30123 Venice (Italy)

2015-03-06

We demonstrate that ships of moderate size, sailing at low depth Froude numbers (0.37–0.5) in a navigation channel surrounded by shallow banks, produce depressions with depths up to 2.5 m. These depressions (Bernoulli wakes) propagate as long-living strongly nonlinear solitary Riemann waves of depression substantial distances into Venice Lagoon. They gradually become strongly asymmetric with the rear of the depression becoming extremely steep, similar to a bore. As they are dynamically similar, air pressure fluctuations moving over variable-depth coastal areas could generate meteorological tsunamis with a leading depression wave followed by a devastating bore-like feature. - Highlights: • Unprecedently deep long-living ship-induced waves of depression detected. • Such waves are generated in channels with side banks under low Froude numbers. • The propagation of these waves is replicated using Riemann waves. • Long-living waves of depression form bore-like features at rear slope.

Ship-induced solitary Riemann waves of depression in Venice Lagoon

International Nuclear Information System (INIS)

Parnell, Kevin E.; Soomere, Tarmo; Zaggia, Luca; Rodin, Artem; Lorenzetti, Giuliano; Rapaglia, John; Scarpa, Gian Marco

2015-01-01

We demonstrate that ships of moderate size, sailing at low depth Froude numbers (0.37–0.5) in a navigation channel surrounded by shallow banks, produce depressions with depths up to 2.5 m. These depressions (Bernoulli wakes) propagate as long-living strongly nonlinear solitary Riemann waves of depression substantial distances into Venice Lagoon. They gradually become strongly asymmetric with the rear of the depression becoming extremely steep, similar to a bore. As they are dynamically similar, air pressure fluctuations moving over variable-depth coastal areas could generate meteorological tsunamis with a leading depression wave followed by a devastating bore-like feature. - Highlights: • Unprecedently deep long-living ship-induced waves of depression detected. • Such waves are generated in channels with side banks under low Froude numbers. • The propagation of these waves is replicated using Riemann waves. • Long-living waves of depression form bore-like features at rear slope

Analysis of a ship-to-ship collision

International Nuclear Information System (INIS)

Porter, V.L.; Ammerman, D.J.

1996-01-01

Sandia National Laboratories is involved in a safety assessment for the shipment of radioactive material by sea. One part of this study is investigation of the consequences of ship-to-ship collisions. This paper describes two sets of finite element analyses performed to assess the structural response of a small freighter and the loading imparted to radioactive material (RAM) packages during several postulated collision scenarios with another ship. The first series of analyses was performed to evaluate the amount of penetration of the freighter hull by a striking ship of various masses and initial velocities. Although these analyses included a representation of a single RAM package, the package was not impacted during the collision so forces on the package could not be computed. Therefore, a second series of analyses incorporating a representation of a row of seven packages was performed to ensure direct package impact by the striking ship. Average forces on a package were evaluated for several initial velocities and masses of the striking ship. In addition to. providing insight to ship and package response during a few postulated ship collisions scenarios, these analyses will be used to benchmark simpler ship collision models used in probabilistic risk assessment analyses

Modeling the regional impact of ship emissions on NOx and ozone levels over the Eastern Atlantic and Western Europe using ship plume parameterization

Directory of Open Access Journals (Sweden)

P. Pisoft

2010-07-01

Full Text Available In general, regional and global chemistry transport models apply instantaneous mixing of emissions into the model's finest resolved scale. In case of a concentrated source, this could result in erroneous calculation of the evolution of both primary and secondary chemical species. Several studies discussed this issue in connection with emissions from ships and aircraft. In this study, we present an approach to deal with the non-linear effects during dispersion of NOx emissions from ships. It represents an adaptation of the original approach developed for aircraft NOx emissions, which uses an exhaust tracer to trace the amount of the emitted species in the plume and applies an effective reaction rate for the ozone production/destruction during the plume's dilution into the background air. In accordance with previous studies examining the impact of international shipping on the composition of the troposphere, we found that the contribution of ship induced surface NOx to the total reaches 90% over remote ocean and makes 10–30% near coastal regions. Due to ship emissions, surface ozone increases by up to 4–6 ppbv making 10% contribution to the surface ozone budget. When applying the ship plume parameterization, we show that the large scale NOx decreases and the ship NOx contribution is reduced by up to 20–25%. A similar decrease was found in the case of O3. The plume parameterization suppressed the ship induced ozone production by 15–30% over large areas of the studied region. To evaluate the presented parameterization, nitrogen monoxide measurements over the English Channel were compared with modeled values and it was found that after activating the parameterization the model accuracy increases.

Barge loading facilities in conjunction with wood chipping and sawlog mill, Tennessee River Mile 145. 9R: Environmental assessment

Energy Technology Data Exchange (ETDEWEB)

1990-08-01

The purpose of this Environmental Assessment (EA) is to evaluate the environmental consequences of approving, denying, or adopting reasonable alternatives to a request for barge loading facilities. These facilities would serve a proposed wood chipping and sawlog products operation at Tennessee River Mile (TRM) 145.9, right descending bank, (Kentucky Lake), in Perry County, Tennessee. The site is located between Short Creek and Peters Landing. The applicant is Southeastern Forest Products, L.P. (SFP), Box 73, Linden, Tennessee and the proposed facilities would be constructed on or adjacent to company owned land. Portions of the barge terminal would be constructed on land over which flood easement rights are held by the United States of America and administered by the Tennessee Valley Authority (TVA). The US Army Corps of Engineers (CE) and TVA have regulatory control over the proposed barge terminal facilities since the action would involve construction in the Tennessee River which is a navigable water of the United States. The wood chipping and sawlog products facilities proposed on the upland property are not regulated by the CE or TVA. On the basis of the analysis which follows, it has been determined that a modified proposal (as described herein) would not significantly affect the quality of the human environment, and does not require the preparation of an environmental impact statement. 8 refs.

A static analysis method for barge-impact design of bridges with consideration of dynamic amplification : final report, November 2009.

Science.gov (United States)

2009-11-01

Current practice with regard to designing bridge structures to resist impact loads associated with barge collisions relies upon the : use of the American Association of State Highway and Transportation Officials (AASHTO) bridge design specifications....

Method and apparatus for disposing a radioactive waste container to submarine bottom

International Nuclear Information System (INIS)

Shibata, Kiyoshi; Yoshida, Shoichi.

1980-01-01

Purpose: To completely eliminate a danger occurred by the rolling of a hull in the ocean in a method and apparatus for disposing radioactive waste container to submarine bottom by independently handling the radioactive waste containers when loading the container in a compartment carried on a barge and sinking the containers together with the compartment to the submarine bottom at its disposing time. Method: Radioactive waste containers are carried into a compartment loaded on a barge floating completely, and the barge is then applied with external force thereto by a ship or the like and sailed to the marine disposal area. Then, water is filled in the ballast tank of the barge to submerge the barge, the compartment is floated and separated from the containers, and water is charged into the compartment to sink the compartment. (Aizawa, K.)

Towards Real Time Simulation of Ship-Ship Interaction

DEFF Research Database (Denmark)

Lindberg, Ole; Bingham, Harry B.; Engsig-Karup, Allan Peter

2012-01-01

We present recent and preliminary work directed towards the development of a simplified, physics-based model for improved simulation of ship-ship interaction that can be used for both analysis and real-time computing (i.e. with real-time constraints due to visualization). The goal is to implement...... accurate (realistic) and much faster ship-wave and ship-ship simulations than are currently possible. The coupling of simulation with visualization should improve the visual experience such that it can be perceived as more realistic in training. Today the state-of-art in real-time ship-ship interaction...... is for efficiency reasons and time-constraints in visualization based on model experiments in towing tanks and precomputed force tables. We anticipate that the fast, and highly parallel, algorithm described by Engsig-Karup et al. [2011] for execution on affordable modern high-throughput Graphics Processing Units...

A decision support system tool for the transportation by barge of import containers : A case study

NARCIS (Netherlands)

Fazi, Stefano; Fransoo, Jan C.; Van Woensel, Tom

2015-01-01

In this paper, we present a DSS that generates schedules for the transportation of containers by barge in the hinterland, in particular from sea terminals to an inland terminal. As a case study, we propose the transportation from the ports of Rotterdam and Antwerp to a terminal in the south of the

Contribution of ship emissions to the concentration and deposition of air pollutants in Europe

Directory of Open Access Journals (Sweden)

S. Aksoyoglu

2016-02-01

Full Text Available Emissions from the marine transport sector are one of the least-regulated anthropogenic emission sources and contribute significantly to air pollution. Although strict limits were introduced recently for the maximum sulfur content in marine fuels in the SECAs (sulfur emission control areas and in EU ports, sulfur emissions outside the SECAs and emissions of other components in all European maritime areas have continued to increase in the last two decades. We have used the air quality model CAMx (Comprehensive Air Quality Model with Extensions with and without ship emissions for the year 2006 to determine the effects of international shipping on the annual as well as seasonal concentrations of ozone, primary and secondary components of PM2.5, and the dry and wet deposition of nitrogen and sulfur compounds in Europe. The largest changes in pollutant concentrations due to ship emissions were predicted for summer. Concentrations of particulate sulfate increased due to ship emissions in the Mediterranean (up to 60 %, the English Channel and the North Sea (30–35 %, while increases in particulate nitrate levels were found especially in the north, around the Benelux area (20 %, where there were high NH3 land-based emissions. Our model results showed that not only are the atmospheric concentrations of pollutants affected by ship emissions, but also depositions of nitrogen and sulfur compounds increase significantly along the shipping routes. NOx emissions from the ships, especially in the English Channel and the North Sea, cause a decrease in the dry deposition of reduced nitrogen at source regions by moving it from the gas phase to the particle phase which then contributes to an increase in the wet deposition at coastal areas with higher precipitation. In the western Mediterranean region, on the other hand, model results show an increase in the deposition of oxidized nitrogen (mostly HNO3 due to the ship traffic. Dry deposition of SO2 seems to

33 CFR 165.830 - Regulated Navigation Area; Reporting Requirements for Barges Loaded with Certain Dangerous...

Science.gov (United States)

2010-07-01

... either by telephone to (866) 442-6089, by fax to (866) 442-6107, or by e-mail to [email protected] A reporting form and e-mail link are available at http://www.uscg.mil/d8/Divs/M/IRVMC.htm. (5) The general... used to move, transport, or deliver a CDC barge within a fleeting area. Inland River Vessel Movement...

33 CFR 165.921 - Regulated Navigation Area; Reporting Requirements for Barges Loaded with Certain Dangerous...

Science.gov (United States)

2010-07-01

... either by telephone to (866) 442-6089, by fax to (866) 442-6107, or by e-mail to [email protected] A reporting form and e-mail link are available at http://www.uscg.mil/d8/Divs/M/IRVMC.htm. (5) The general... size vessel that is used to move, transport, or deliver a CDC barge within a fleeting area. Fleeting...

The shipping man adventures in ship finance

CERN Document Server

McCleery, Matthew

2013-01-01

When restless New York City hedge fund manager Robert Fairchild watches the Baltic Dry Cargo Index plunge 97%, registering an all-time high and a 25-year low within the span of just six months, he decides to buy a ship. Immediately fantasizing about naming a vessel after his wife, carrying a string of worry beads and being able to introduce himself as a "shipowner" at his upcoming college reunion, Fairchild immediately embarks on an odyssey into the most exclusive, glamorous and high stakes business in the world. From pirates off the coast of Somalia and on Wall Street to Greek and Norwegian shipping magnates, the education of Robert Fairchild is an expensive one. In the end, he loses his hedge fund, but he gains a life - as a Shipping Man. Part fast paced financial thriller, part ship finance text book, The Shipping Man is 310 pages of required reading for anyone with an interest in capital formation for shipping.

Are nuclear ships environmentally safer than conventionally powered ships

International Nuclear Information System (INIS)

Bone, C.A.; Molgaard, C.A.; Helmkamp, J.C.; Golbeck, A.L.

1988-01-01

An epidemiologic analysis was conducted to determine if risk of hospitalization varied by age, ship type, or occupation between nuclear and conventional powered ship crews in the U.S. Navy. Study cohorts consisted of all male enlisted personnel who served exclusively aboard conventional or nuclear powered aircraft carriers and cruisers during the years 1975-1979; cases were those men hospitalized during this period (N = 48,242). Conventional ship personnel showed significantly elevated rates of injury and disease when compared to nuclear ship personnel. The largest relative risks by age occurred for conventional ship crewmen less than 30 years old. Seaman, logistics (supply), and healthcare personnel serving aboard conventional ships comprised the occupational groups exhibiting the highest hospitalization rate differentials. The results strongly suggest that nuclear ships provide a healthier, safer working and living environment than conventional ships

Shipping

NARCIS (Netherlands)

Wijnolst, N.; Wergeland, T.

1996-01-01

Shipping is a multi-faceted industry which is rather complex to define from an academic point of view. This book attempts to grasp these complexities and provide the reader with an overview of the main topics and terminology in shipping. The book is based on material from our courses in shipping at

The Rachel-B/coastal towing incident

International Nuclear Information System (INIS)

Fawn, D.R. Jr.

1990-01-01

On June 23, 1989, the outbound tanker ship Rachel-B and the towboat Gayolyn Ann Griffin, towing barges owned by Coastal Towing, collided in the northern end of the Houston Sip Channel near its confluence with the Bayport Channel. The collision resulted in a spill of approximately 6,000 barrels of slurry oil into upper Galveston Bay. This paper reports that the U.S. Coast Guard assumed the role of on-scene coordinator. Several State agencies were involved in the various on-site activities. The Texas Water Commission (TWC), as the State's lead agency in spill response, closely monitored the spill and cleanup activities. Despite the efforts of all the aforementioned agencies, the weather ultimately directed spill response activities as it became readily apparent that the eye of Tropical Storm Allison would pass near the site of the spill

46 CFR 151.03-19 - Environment.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Environment. 151.03-19 Section 151.03-19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-19 Environment. This term refers to the atmosphere...

46 CFR 151.03-21 - Filling density.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Filling density. 151.03-21 Section 151.03-21 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-21 Filling density. The ratio, expressed as...

Recovery of the Irving Whale oil barge: overflights with the laser environmental airborne fluorosensor

International Nuclear Information System (INIS)

Brown, C. E.; Nelson, R. D.; Fingas, M.

1997-01-01

Contribution of Environment Canada's laser environmental airborne fluorosensor (LEAF) to the recovery in 1996 of the oil barge 'Irving Whale' from the St. Lawrence River was described. Additional equipment employed on board the DC-3 aircraft included an RC-10 colour mapping camera and two down-looking video cameras. Leaking of Bunker C fuel oil was detected around the sunken barge in the days immediately prior to and during the day of the raising of the vessel. During each overflight, the LEAF system produced timely, concise map-based contamination information in hard copy form. The LEAF system also detected extremely thin, sub-sheen levels of oil on the day of the lift over the majority of the southern Gulf of St. Lawrence. The extent of coverage was greatly reduced by the next day and essentially eliminated by the second day after the lift. The LEAF system continued to monitor the 'Irving Whale' as it was transported to Halifax on the deck of the submersible vessel Boabarge 10. There was no evidence of oil leakage during the transit attributable to the 'Irving Whale'. During the entire period of lift and recovery the LEAF system performed flawlessly, and demonstrated the usefulness of remote sensing flights during oil spill response operations. 3 refs., 4 figs

On the Global Ship Hull Bending Energy in Ship Collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Li, Y.

2004-01-01

During ship collisions part of the kinetic energy of the involved vessels prior to contact is absorbed as energy dissipated by crushing of the hull structures, by friction and by elastic energy. The purpose of this report is to present an estimate of the elastic energy that can be stored in elastic...... hull vibrations during a ship collision. When a ship side is strengthened in order to improve the crashworthiness it has been argued in the scientific literature that a non trivial part of the energy released for structural deformation during the collision can be absorbed as elastic energy in global...... ship hull vibrations, such that with strong ship sides less energy has to be spent in crushing of the striking ship bow and/or the struck ship side. In normal ship-ship collision analyses both the striking and struck ship are usually considered as rigid bodies where structural crushing is confined...

A demonstration of a low cost approach to security at shipping facilities and ports

Science.gov (United States)

Huck, Robert C.; Al Akkoumi, Mouhammad K.; Herath, Ruchira W.; Sluss, James J., Jr.; Radhakrishnan, Sridhar; Landers, Thomas L.

2010-04-01

Government funding for the security at shipping facilities and ports is limited so there is a need for low cost scalable security systems. With over 20 million sea, truck, and rail containers entering the United States every year, these facilities pose a large risk to security. Securing these facilities and monitoring the variety of traffic that enter and leave is a major task. To accomplish this, the authors have developed and fielded a low cost fully distributed building block approach to port security at the inland Port of Catoosa in Oklahoma. Based on prior work accomplished in the design and fielding of an intelligent transportation system in the United States, functional building blocks, (e.g. Network, Camera, Sensor, Display, and Operator Console blocks) can be assembled, mixed and matched, and scaled to provide a comprehensive security system. The following functions are demonstrated and scaled through analysis and demonstration: Barge tracking, credential checking, container inventory, vehicle tracking, and situational awareness. The concept behind this research is "any operator on any console can control any device at any time."

46 CFR 151.45-8 - Illness, alcohol, drugs.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Illness, alcohol, drugs. 151.45-8 Section 151.45-8 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-8 Illness, alcohol, drugs. A person who...

On the global ship hull bending energy in ship collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Li, Yujie

2009-01-01

During ship collisions part of the kinetic energy of the involved vessels immediately prior to contact is absorbed as energy dissipated by crushing of the hull structures, by friction and by elastic energy. The purpose of this report is to present an estimate of the elastic energy that can...... be stored in elastic hull vibrations during a ship collision. When a ship side is strengthened in order to improve the crashworthiness it has been argued in the scientific literature that a non-trivial part of the energy released for structural deformation during the collision can be absorbed as elastic...... energy in global ship hull vibrations, such that with strong ship sides less energy has to be spent in crushing of the striking ship bow and/or the struck ship side. In normal ship–ship collision analyses both the striking and struck ship are usually considered as rigid bodies where structural crushing...

Floating Production Unit FPU P53: logistic and modules installation; Logistica e instalacao dos modulos da Unidade Flutuante de Producao FPU P53

Energy Technology Data Exchange (ETDEWEB)

Arantes, Joao Durval [UTC Engenharia S.A., SP (Brazil)

2008-07-01

This work intends to show a 'case' of success, namely the model of management and the strategy, applied in the logistics and installation of the P53 modules. The criteria, which took QUIP to contract, in Brazil and abroad, technology companies, to supply integrated modules, including engineering, procurement, construction and warranty of performance, are shown. Establishment, at the initial phase of the Project, of the discipline 'constructibility', with the attribution to interact with the engineering design and construction of the modules under QUIP's responsibility, modules supplied by PETROBRAS and mainly, with the site of Naval Conversion in Singapore. Establishment of the discipline 'Marinharia', to act together with 'constructibility' to overcome the difficulties and restrictions of Porto de Rio Grande, such as the following: the width of the sailing channel, interferences of commercial port, availability of mooring pier, relationship with port pilotage and authorities of the Fifth Naval District of Brazilian Navy. The challenges were the maneuvers with 2 crane barges for modules installation, in front the P-53, a VLCC ship and maneuvers the barges, involved at the time of installation of the modules. And, finally, to show the proceeding applied in the physical interfaces of installation of the modules, such as: interferences, supports of the modules, stools in the ship, guides and bumpers. Dimensional control, simulations and extensive planning were the tools of success. (author)

46 CFR 32.63-20 - Hull structure-B/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Hull structure-B/ALL. 32.63-20 Section 32.63-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Hull and Cargo Tank Requirements for Tank Barges Constructed or Converted On or After July 1, 1964...

Time and dose assessment of barge shipment and at-reactor handling of a CASTOR V/21 spent fuel storage cask

Energy Technology Data Exchange (ETDEWEB)

Hostick, C.J. (Pacific Northwest Lab., Richland, WA (United States)); Lavender, J.C. (Westinghouse Hanford Co., Richland, WA (United States)); Wakeman, B.H. (Virginia Electric and Power Co., Richmond, VA (United States))

1992-04-01

This report contains the results of a time/motion analysis and a radiation dose assessment made during the receipt from barge transport and the loading of CAst iron cask for Storage and Transport Of Radioactive material (CASTOR) V/21 storage casks with spent nuclear fuel at the Surry Power Station in Virginia during 1987. The study was a cooperative effort between Pacific Northwest Laboratory (PNL) and Virginia Electric and Power Company (Virginia Power), and was funded by the US Department of Energy (DOE) Transportation Program Office. In this study, cask handling activities were tracked at the Surry Power Station, tracing the transfer of the empty spent fuel storage cask from an ocean-going vessel to a barge for river transport through the activities required to place the loaded storage cask at an at-reactor storage location.

Limited mobility of dioxins near San Jacinto super fund site (waste pit) in the Houston Ship Channel, Texas due to strong sediment sorption.

Science.gov (United States)

Louchouarn, Patrick; Seward, Shaya M; Cornelissen, Gerard; Arp, Hans Peter H; Yeager, Kevin M; Brinkmeyer, Robin; Santschi, Peter H

2018-02-20

Sediments from a waste pit in Houston Ship Channel (HSC) were characterized using a number of molecular markers of natural organic matter fractions (e.g., pyrogenic carbon residues, PAHs, lignins), in addition to dioxins, in order to test the hypothesis that the dispersal and mobility of dioxins from the waste pit in the San Jacinto River is minimal. Station SG-6, sampled at the site of the submerged waste pit, had the highest dioxin/furan concentrations reported for the Houston Ship Channel/Galveston Bay (HSC/GB) system (10,000-46,000 pg/g), which translated into some of the highest reported World Health Organization Toxic Equivalents (TEQs: 2000-11,000 pg/g) in HSC sediments. Using a multi-tracer approach, this study confirmed our hypothesis that sludges from chlorinated pulps are a very likely source of dioxins/furans to this pit. However, this material also contained large quantities of additional hydrophobic organic contaminants (PAHs) and pyrogenic markers (soot-BC, levoglucosan), pointing to the co-occurrence of petroleum hydrocarbons and combustion byproducts. Comparison of dioxin/furan signatures in the waste pit with those from sediments of the HSC and a control site suggests that the remobilization of contaminated particles did not occur beyond the close vicinity of the pit itself. The dioxins/furans in sediments outside the waste pit within the HSC are rather from other diffuse inputs, entering the sedimentary environment through the air and water, and which are comprised of a mixture of industrial and municipal sources. Fingerprinting of waste pit dioxins indicates that their composition is typical of pulp and paper sources. Measured pore water concentrations were 1 order of magnitude lower than estimated values, calculated from a multiphase sorption model, indicating low mobility of dioxins within the waste pit. This is likely accomplished by co-occurring and strong sorbing pyrogenic and petrogenic residues in the waste pit, which tend to keep

Design of 100 MW LNG Floating Barge Power Plant

Directory of Open Access Journals (Sweden)

I Made Ariana

2017-06-01

Full Text Available Floating bargepower plant able to supply amount of electricity to undeveloped island in Indonesia. In this research, the generator will be use in the power plant is dual-fuel engine. The process was determine the engine and every equipment along with its configuration then arrange the equipment. The result, MAN18V51/60DF selected along with its system configuration and its general arrangement. The final design enable 7.06 days of operation with daily average load (64.76 MW or 4.57 days with continues 100 MW load. In the end, the mobile power plant can be built on Damen B32SPo9832 Barge and comply with the regulation floating bargepower plant able to supply amount of electricity to undeveloped island in Indonesia. In this research, the generator will be use in the power plant is dual-fuel engine. The process was determine the engine and every equipment along with its configuration then arrange the equipment. The result, MAN18V51/60DF selected along with its system configuration and its general arrangement. The final design enable 7.06 days of operation with daily average load (64.76 MW or 4.57 days with continues 100 MW load. In the end, the mobile power plant can be built on Damen B32SPo9832 Barge and comply with the regulation Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Green shipping management

CERN Document Server

Lun, Y H Venus; Wong, Christina W Y; Cheng, T C E

2016-01-01

This book presents theory-driven discussion on the link between implementing green shipping practices (GSP) and shipping firm performance. It examines the shipping industry’s challenge of supporting economic growth while enhancing environmental performance. Consisting of nine chapters, the book covers topics such as the conceptualization of green shipping practices (GSPs), measurement scales for evaluating GSP implementation, greening capability, greening and performance relativity (GPR), green management practice, green shipping network, greening capacity, and greening propensity. In view of the increasing quest for environment protection in the shipping sector, this book provides a good reference for firms to understand and evaluate their capability in carrying out green operations on their shipping activities.

75 FR 78928 - Limited Service Domestic Voyage Load Lines for River Barges on Lake Michigan, Delay of Effective...

Science.gov (United States)

2010-12-17

...-AA17 Limited Service Domestic Voyage Load Lines for River Barges on Lake Michigan, Delay of Effective Date AGENCY: Coast Guard, DHS. ACTION: Notice of delay of effective date and reopening of the comment... 46 CFR part 45 as amended by the final rule published in the November 18, 2010, Federal Register (75...

Shipping

OpenAIRE

Wijnolst, N.; Wergeland, T.

1996-01-01

Shipping is a multi-faceted industry which is rather complex to define from an academic point of view. This book attempts to grasp these complexities and provide the reader with an overview of the main topics and terminology in shipping. The book is based on material from our courses in shipping at the universities in Delft and Bergen. As with our lectures, we draw upon quite a va ried material, from research studies at a high academic level to lower level student work and purely descriptive ...

An assessment of the transportation costs of shipping non-fuel assembly hardware to FWMS facilities

International Nuclear Information System (INIS)

Shappert, L.B.; Joy, D.S.; Johnson, P.E.; Danese, F.L.; Best, R.E.

1991-01-01

This study examines the cost of using Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) Initiative I casks for transporting 62,700 MTU of spent fuel plus associated non-fuel assembly hardware (NFAH) between reactor sites and either a monitored retrievable storage (MRS) or a repository facility. The study further considers the benefits of increasing the cell size of the Initiative I BWR cask baskets to accommodate the fuel plus channels (which also would decrease the capacity of the cask to carry BWR fuel without channels) and the use of a commercial, non-spent-fuel cask to carry compacted NFAH that could not be shipped integrally. Costs that are developed involve transportation charges, capital costs for casks, and canning costs of NFAH that have been separated from the fuel. The results indicate that significant cost savings are possible if NFAH is accepted into the Federal Waste Management System (FWMS) that is either integral with the spent fuel, or consolidated if it has been separated. Shipment of unconsolidated NFAH is very expensive. Transportation costs for shipping to a western repository are approximately 50 to 75% higher than the costs for shipping to an eastern MRS

46 CFR 151.45-3 - Manning.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Manning. 151.45-3 Section 151.45-3 Shipping COAST GUARD... HAZARDOUS MATERIAL CARGOES Operations § 151.45-3 Manning. Except as provided for in this section, barges need not be manned unless in the judgment of the Officer in Charge, Marine Inspection, such manning is...

Designing Adaptable Ships: Modularity and Flexibility in Future Ship Designs

Science.gov (United States)

2016-01-01

with motors, belts, shafts , seals, valves, hose spindles , and switches. If ship installation is not installed, the system will be status quo. Ship...Impact: the current centrifugal purifiers (Alfa-Laval) have experienced frequent failures with motor, belts, shafts , seals, valves, hose spindles ... Designing Adaptable Ships Modularity and Flexibility in Future Ship Designs John F. Schank, Scott Savitz, Ken Munson, Brian Perkinson, James

78 FR 19103 - Safety Zone; Spanish Navy School Ship San Sebastian El Cano Escort; Bahia de San Juan; San Juan, PR

Science.gov (United States)

2013-03-29

...-AA00 Safety Zone; Spanish Navy School Ship San Sebastian El Cano Escort; Bahia de San Juan; San Juan... temporary moving safety zone on the waters of Bahia de San Juan during the transit of the Spanish Navy... Channel entrance, and to protect the high ranking officials on board the Spanish Navy School Ship San...

PHAEOPIGMENT CONCENTRATION, PHYTOPLANKTON - WET WEIGHT and other data from BARGE from 1975-05-01 to 1975-07-01 (NCEI Accession 7600377)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Water depth and other data from the BARGE from 01 May 1975 to 01 July 1975. Data were collected by the Skidway Institute of Oceanography (SKIO) as part of the...

LCA-ship. Design tool for energy efficient ships. A Life Cycle Analysis Program for Ships. Final report

Energy Technology Data Exchange (ETDEWEB)

Jiven, Karl; Sjoebris, Anders [MariTerm AB, Goeteborg (Sweden); Nilsson, Maria [Lund Univ. (Sweden). Stiftelsen TEM; Ellis, Joanne; Traegaardh, Peter; Nordstroem, Malin [SSPA Sweden AB, Goeteborg (Sweden)

2004-05-01

In order to make it easier to include aspects during ship design that will improve environmental performance, general methods for life cycle calculations and a prototype tool for LCA calculations of ships and marine transportation have been developed. The base of the life cycle analyses is a comprehensive set of life cycle data that was collected for the materials and consumables used in ship construction and vessel operations. The computer tool developed makes it possible to quickly and simply specify (and calculate) the use of consumables over the vessel's life time cycle. Special effort has been made to allow the tool to be used for different types of vessels and sea transport. The main result from the project is the computer tool LCA ship, which incorporates collected and developed life cycle data for some of the most important materials and consumables used in ships and their operation. The computer application also contains a module for propulsion power calculations and a module for defining and optimising the energy system onboard the vessel. The tool itself is described in more detail in the Computer application manual. The input to the application should, as much as possible, be the kind of information that is normally found in a shipping company concerning vessel data and vessel movements. It all starts with defining the ship to be analysed and continues with defining how the ship is used over the lifetime. The tool contains compiled and processed background information about specific materials and processes (LCA data) connected to shipping operations. The LCA data is included in the tool in a processed form. LCA data for steel will for example include the environmental load from the steel production, the process to build the steel structure of the ship, the scrapping and the recycling phase. To be able to calculate the environmental load from the use of steel the total amount of steel used over the life cycle of the ship is also needed. The

The SUMO Ship Detector Algorithm for Satellite Radar Images

Directory of Open Access Journals (Sweden)

Harm Greidanus

2017-03-01

Full Text Available Search for Unidentified Maritime Objects (SUMO is an algorithm for ship detection in satellite Synthetic Aperture Radar (SAR images. It has been developed over the course of more than 15 years, using a large amount of SAR images from almost all available SAR satellites operating in L-, C- and X-band. As validated by benchmark tests, it performs very well on a wide range of SAR image modes (from Spotlight to ScanSAR and resolutions (from 1–100 m and for all types and sizes of ships, within the physical limits imposed by the radar imaging. This paper describes, in detail, the algorithmic approach in all of the steps of the ship detection: land masking, clutter estimation, detection thresholding, target clustering, ship attribute estimation and false alarm suppression. SUMO is a pixel-based CFAR (Constant False Alarm Rate detector for multi-look radar images. It assumes a K distribution for the sea clutter, corrected however for deviations of the actual sea clutter from this distribution, implementing a fast and robust method for the clutter background estimation. The clustering of detected pixels into targets (ships uses several thresholds to deal with the typically irregular distribution of the radar backscatter over a ship. In a multi-polarization image, the different channels are fused. Azimuth ambiguities, a common source of false alarms in ship detection, are removed. A reliability indicator is computed for each target. In post-processing, using the results of a series of images, additional false alarms from recurrent (fixed targets including range ambiguities are also removed. SUMO can run in semi-automatic mode, where an operator can verify each detected target. It can also run in fully automatic mode, where batches of over 10,000 images have successfully been processed in less than two hours. The number of satellite SAR systems keeps increasing, as does their application to maritime surveillance. The open data policy of the EU�

Compact Polarimetric SAR Ship Detection with m-δ Decomposition Using Visual Attention Model

Directory of Open Access Journals (Sweden)

Lu Xu

2016-09-01

Full Text Available A few previous studies have illustrated the potentials of compact polarimetric Synthetic Aperture Radar (CP SAR in ship detection. In this paper, we design a ship detection algorithm of CP SAR from the perspective of computer vision. A ship detection algorithm using the pulsed cosine transform (PCT visual attention model is proposed to suppress background clutter and highlight conspicuous ship targets. It is the first time that a visual attention model is introduced to CP SAR application. The proposed algorithm is a quick and complete framework for practical use. Polarimetric features—the relative phase δ and volume scattering component—are extracted from m-δ decomposition to eliminate false alarms and modify the PCT model. The constant false alarm rate (CFAR algorithm based on lognormal distribution is adopted to detect ship targets, after a clutter distribution fitting procedure of the modified saliency map. The proposed method is then tested on three simulated circular-transmit-linear-receive (CTLR mode images, which covering East Sea of China. Compared with the detection results of SPAN and the saliency map with only single-channel amplitude, the proposed method achieves the highest detection rates and the lowest misidentification rate and highest figure of merit, proving the effectiveness of polarimetric information of compact polarimetric SAR ship detection and the enhancement from the visual attention model.

Classification of Ship Routing and Scheduling Problems in Liner Shipping

DEFF Research Database (Denmark)

Kjeldsen, Karina Hjortshøj

2011-01-01

This article provides a classification scheme for ship routing and scheduling problems in liner shipping in line with the current and future operational conditions of the liner shipping industry. Based on the classification, the literature is divided into groups whose main characteristics...

46 CFR 172.085 - Hull type.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull type. 172.085 Section 172.085 Shipping COAST GUARD... of This Chapter § 172.085 Hull type. If a cargo listed in Table 151.05 of part 151 of this chapter is to be carried, the tank barge must be at least the hull type specified in Table 151.05 of this...

Nuclear merchant ship propulsion

International Nuclear Information System (INIS)

Schroeder, E.; Jager, W.; Schafstall, H.G.

1977-01-01

The operation of about 300 nuclear naval vessels has proven the feasibility of nuclear ship propulsion. Until now six non military ships have been built or are under construction. In the Soviet Union two nuclear icebreakers are in operation, and a third one is under construction. In the western world three prototype merchant ships have been built. Of these ships only the NS OTTO HAHN is in operation and provides valuable experience for future large scale use of nuclear merchant ship propulsion. In many countries studies and plans are made for future nuclear merchant ships. Types of vessels investigated are large containerships, tankers and specialized ships like icebreakers or ice-breaking ships. The future of nuclear merchant ship propulsion depends on three interrelated items: (1) nuclear ship technology; (2) economy of nuclear ship propulsion; (3) legal questions. Nuclear merchant ship technology is based until now on standard ship technology and light water reactor technology. Except for special questions due to the non-stationary type of the plant entirely new problems do not arise. This has been proven by the recent conceptual licensing procedure for a large nuclear containership in Germany. The economics of nuclear propulsion will be under discussion until they are proven by the operation of privately owned lead ships. Unsolved legal questions e.g. in connection with port entry permissions are at present another problem for nuclear shipping. Efforts are made to solve these questions on an international basis. The future development of nuclear energy electricity production in large land based plants will stimulate the employment of smaller units. Any future development of long distance sea transport will have to take this opportunity of a reliable and economic energy supply into account

Risk Analysis on Ship Wreck and Container Cargo to Ship Navigation

Directory of Open Access Journals (Sweden)

Muhammad Badrus Zaman

2017-03-01

Full Text Available Wreck of a ship is an incident that must be avoided. Ship accidents are generally caused by a several cases, such as human error, natural disaster, technical errors, missed communication, poor condition of the ship, and many more. Ship wreckage have huge impact for ship navigation, environment, economics, and others. Those impact have many disadvantages for the shipowners, and also for environment. For examples the fuel spills that pollute the environment, make disturbance to sailing ship because the track for those navigation is blocked by the ship wreck and their cargo especially on shallow location (<50 m. These research will discuss the effect the container when it is floats on the sea and its interference other ships. The main objective of this study is to present a risk assessment on the environmental impact of the wreck and container cargo. Wrecks on the seabed is likely to pose a risk to passing ships. container and its contents as well as the possibility of refloat, and also their environmental risks emanating from the wreck and container cargo, such as fuels, lubricants, and chemical cargo. Variations scenario is a collision between ships that pass by floating containers. The frequency of refloating container, and the consequences of the passing ship depends on several factors, which will be the subject of research. However, because of the frequency of refloating containers is unlikely, then the risk is low and does not pose a danger to navigation. These risk assessment using risk matrix 5x5 which is the combined value of the frequency and consequences of the incident. The results of this study indicate the level of risk, whether the risk is accepted, not accepted or received by considering the costs and benefits (ALARP. To consequence, there are two parameters which energy is absorbed and the penetration occurs. The absorbed energy is divided into two, namely the energy absorbed by ship and the energy absorbed by containers. In this

Buckling of Ship Structures

CERN Document Server

Shama, Mohamed

2013-01-01

Buckling of Ship Structures presents a comprehensive analysis of the buckling problem of ship structural members. A full analysis of the various types of loadings and stresses imposed on ship plating and primary and secondary structural members is given. The main causes and consequences of the buckling mode of failure of ship structure and the methods commonly used to control buckling failure are clarified. This book contains the main equations required to determine the critical buckling stresses for both ship plating and the primary and secondary stiffening structural members. The critical buckling stresses are given for ship plating subjected to the induced various types of loadings and having the most common boundary conditions encountered in ship structures.  The text bridges the gap existing in most books covering the subject of buckling of ship structures in the classical analytical format, by putting the emphasis on the practical methods required to ensure safety against buckling of ship structur...

Viking FellowSHIP: Norwegian hydrogen ship on the right course

International Nuclear Information System (INIS)

Larssen-Aas, Kari

2006-01-01

In the future fuel cells will change the world of shipping's economical conditions, and environmental effects from this industry. A new model of a hydrogen fuelled ship was presented at the ONS exhibition in Stavanger 2006. The technology may revolutionize the shipping industry. A brief description of the project is presented (ml)

Safety of nuclear ships

International Nuclear Information System (INIS)

1978-01-01

Interest in the utilization of nuclear steam supply systems for merchant ships and icebreakers has recently increased considerably due to the sharp rise in oil prices and the continuing trend towards larger and faster merchant ships. Canada, for example, is considering construction of an icebreaker in the near future. On the other hand, an accident which could result in serious damage to or the sinking of a nuclear ship is potentially far more dangerous to the general public than a similar accident with a conventional ship. Therefore, it was very important to evaluate in an international forum the safety of nuclear ships in the light of our contemporary safety philosophy, taking into account the results of cumulative operating experience with nuclear ships in operation. The philosophy and safety requirement for land-based nuclear installations were outlined because of many common features for both land-based nuclear installations and nuclear ships. Nevertheless, essential specific safety requirements for nuclear ships must always be considered, and the work on safety problems for nuclear ships sponsored by the NEA was regarded as an important step towards developing an international code of practice by IMCO on the safety of nuclear merchant ships. One session was devoted to the quantitative assessment of nuclear ship safety. The probability technique of an accident risk assessment for nuclear power plants is well known and widely used. Its modification, to make it applicable to nuclear propelled merchant ships, was discussed in some papers. Mathematical models for describing various postulated accidents with nuclear ships were developed and reported by several speakers. Several papers discussed a loss-of-coolant accident (LOCA) with nuclear steam supply systems of nuclear ships and engineering design features to prevent a radioactive effluence after LOCA. Other types of postulated accidents with reactors and systems in static and dynamic conditions were also

The thermal analysis of BR-100: A barge/rail nuclear spent fuel transportation container

International Nuclear Information System (INIS)

Copsey, A.B.

1992-01-01

B ampersand W Fuel Company is designing a spent-fuel container called BR-100 that can be used for either barge or rail transport. This paper presents the thermal design and analysis. Both normal operation and hypothetical accident thermal transient conditions are evaluated. The BR-100 cask has a concrete layer than contains free water. During a hypothetical accident, the free water vaporizes and flows from the cask, removing a significant amount of thermal transient energy. The BR-100 transportation package meets the thermal requirements of 10CFR71. It additionally offers substantial margins to established material temperature limits

40 CFR 61.270 - Applicability and designation of sources.

Science.gov (United States)

2010-07-01

... specific gravity within the range of specific gravities specified in ASTM D836-84 for Industrial Grade... attached to motor vehicles such as trucks, rail cars, barges, or ships. (e) This subpart does not apply to...

Recent situations around nuclear ships

International Nuclear Information System (INIS)

Mizuno, Hiroshi

1978-01-01

The philosophy when the safety standard for nuclear ships is drawn up and the international rules specifically for nuclear ships are summarized. As for the safety standard for nuclear ships, the safety requirements for ordinary ships, for the ships transporting nuclear reactors, for ordinary nuclear reactors, and for the reactors moving around the seas must be included. As for the international rules for nuclear ships, there are chapter 8 ''Nuclear ships'' in the International Convention on the Safety of Life at Sea, 1960 and 1974, and Safety Consideration in the Use of Ports and Approaches by Nuclear Merchant Ships. Also there are national rules and standards in Japan and foreign countries. One of the means to explore the practicality of nuclear ships is the investigation of the economy. At this time, the social merits and demerits of nuclear ships must be compared with conventional ships by taking total expenses into account without omission. When oil is depleted, the age of nuclear ships will not necessarily begin, and the will be still some competitors. The investigations concerning the economy of nuclear ships have been carried out in various countries. The present state of the development of nuclear ships in Japan and foreign countries is explained. Many conferences and symposia have been held concerning nuclear ships, and those held recently are enumerated. The realization of nuclear ship age cannot be anticipated from existing papers and shipbuilding projects. (Kako, I.)

Shipping Information Pipeline

DEFF Research Database (Denmark)

Jensen, Thomas

to creating a more efficient shipping industry, and a number of critical issues are identified. These include that shipments depend on shipping information, that shipments often are delayed due to issues with documentation, that EDI messages account for only a minor part of the needed information......This thesis applies theoretical perspectives from the Information Systems (IS) research field to propose how Information Technology (IT) can improve containerized shipping. This question is addressed by developing a set of design principles for an information infrastructure for sharing shipping...... information named the Shipping Information Pipeline (SIP). Review of the literature revealed that IS research prescribed a set of meta-design principles, including digitalization and digital collaboration by implementation of Inter-Organizational Systems based on Electronic Data Interchange (EDI) messages...

Calculation for Hull Strength Construction in Offshore Structures

African Journals Online (AJOL)

PROF. O. E. OSUAGWU

2013-09-01

Sep 1, 2013 ... of hull plating, reinforcing stiffeners, girders, and other structures. This paper therefore used the .... From these equations we derive that. Safety of. Factor. Stress ..... machineries, systems etc. of the ships or barge under design.

A numerical study on ship-ship interaction in shallow and restricted waterway

Directory of Open Access Journals (Sweden)

Sungwook Lee

2015-09-01

Full Text Available In the present study, a numerical prediction method on the hydrodynamic interaction force and moment between two ships in shallow and restricted waterway is presented. Especially, the present study proposes a methodology to overcome the limitation of the two dimensional perturbation method which is related to the moored-passing ship interaction. The validation study was performed and compared with the experiment, firstly. Afterward, in order to propose a methodology in terms with the moored-passing ship interaction, further studies were performed for the moored-passing ship case with a Reynolds Averaged Navier-Stokes (RANS calculation which is using OpenFOAM with Arbitrary Coupled Mesh Interface (ACMI technique and compared with the experiment result. Finally, the present study proposes a guide to apply the two dimensional perturbation method to the moored-passing ship interaction. In addition, it presents a possibility that the RANS calculation with ACMI can applied to the ship-ship interaction without using a overset moving grid technique.

Nuclear ship engineering simulator

International Nuclear Information System (INIS)

Itoh, Yasuyoshi; Kusunoki, Tsuyoshi; Hashidate, Koji

1991-01-01

The nuclear ship engineering simulator, which analyzes overall system response of nuclear ship numerically, is now being developed by JAERI as an advanced design tool with the latest computer technology in software and hardware. The development of the nuclear ship engineering simulator aims at grasping characteristics of a reactor plant under the situation generated by the combination of ocean, a ship hull and a reactor. The data from various tests with the nuclear ship 'MUTSU' will be used for this simulator to modulate and verify its functions of reproducing realistic response of nuclear ship, and then the simulator will be utilized for the research and development of advanced marine reactors. (author)

Seismic data collection from water gun and industrial background sources in the Chicago Sanitary and Ship Canal area, Illinois, 2011

Science.gov (United States)

Morrow, William S.; Carpenter, Phillip J.; Adams, Ryan F.

2015-01-01

The water gun is a tool adapted from deep marine geophysical surveys that is being evaluated for use as an acoustic fish deterrent to control the movement of invasive marine species. The water gun creates a seismic signal by using a compressed air discharge to move a piston rapidly within the water, resulting in an implosion. This energy pulse may be able to modify fish behavior or destroy marine life, such as the Asian carp, at some distance. The effects of this energy pulse on structures in the Chicago Sanitary and Ship Canal (CSSC), such as canal walls, shore lines, and lock structures, are not known. The potential effects of the use of a water gun on structures was identified as a concern in the CSSC and was assessed relative to existing background sources during this study. During September 2011, two water guns with piston sizes of 80 and 343 cubic inches, respectively, were tested in the CSSC at varying pressures and distances from a canal wall consisting of dolomite and dolomite setblock. Seismic data were collected during these water gun firings using geophones on land, in boreholes, and at the canal wall interface. Data were collected at varying depths in the canal water using hydrophones. Seismic data were also collected during the occurrences of barge traffic, railroad traffic located near the electric fish barrier in Lemont, and coal-loading operations at a coal power plant near the electric fish barrier. In general, energy produced by barge and railroad sources was less than energy created by the water gun. Energy levels produced by coal-loading operations at least 200 feet from geophones were approximately four times lower than energy levels measured during water gun operations.

SENTINEL-1/2 DATA FOR SHIP TRAFFIC MONITORING ON THE DANUBE RIVER

Directory of Open Access Journals (Sweden)

I. Dana Negula

2016-06-01

Full Text Available After a long period of drought, the water level of the Danube River has significantly dropped especially on the Romanian sector, in July-August 2015. Danube reached the lowest water level recorded in the last 12 years, causing the blockage of the ships in the sector located close to Zimnicea Harbour. The rising sand banks in the navigable channel congested the commercial traffic for a few days with more than 100 ships involved. The monitoring of the decreasing water level and the traffic jam was performed based on Sentinel-1 and Sentinel-2 free data provided by the European Space Agency and the European Commission within the Copernicus Programme. Specific processing methods (calibration, speckle filtering, geocoding, change detection, image classification, principal component analysis, etc. were applied in order to generate useful products that the responsible authorities could benefit from. The Sentinel data yielded good results for water mask extraction and ships detection. The analysis continued after the closure of the crisis situation when the water reached the nominal level again. The results indicate that Sentinel data can be successfully used for ship traffic monitoring, building the foundation of future endeavours for a durable monitoring of the Danube River.

Crushing Strength of Ship Structures

DEFF Research Database (Denmark)

Cerup-Simonsen, Bo; Abramowicz, W.; Høstgaard-Brene, C.N.S.

1999-01-01

The crushing response of ship structures is of primary importance to the designers and practicing engineers concerned with accidental loading and accident reconstruction of marine vehicles. Ship to-ship collisions, ship-harbor infrastructure interaction or ship-offshore structure interaction are ...

Development of the nuclear ship MUTSU spent fuel shipping cask

International Nuclear Information System (INIS)

Ishizuka, M.; Umeda, M.; Nawata, Y.; Sato, H.; Honami, M.; Nomura, T.; Ohashi, M.; Higashino, A.

1989-01-01

After the planned trial voyage (4700 MWD/MTU) of the nuclear ship MUTSU in 1990, her spent fuel assemblies, initially made of two types of enriched UO 2 (3.2wt% and 4.4wt%), will be transferred to the reprocessing plant soon after cooling down in the ship reactor for more than one year. For transportation, the MUTSU spent fuel shipping casks will be used. Prior to transportation to the reprocessing plant, the cooled spent fuel assemblies will be removed from the reactor to the shipping casks and housed at the spent fuel storage facility on site. In designing the MUTSU spent fuel shipping cask, considerations were given to make the leak-tightness and integrity of the cask confirmable during storage. The development of the cask and the storage function demonstration test were performed by Japan Atomic Energy Research Institute (JAERI) and Mitsubishi Heavy Industries, Ltd. (MHI). One prototype cask for the storage demonstration test and licensed thirty-five casks were manufactured between 1987 and 1988

Fixed position holding control for self-propulsion barges under disturbance condition; Gairanka ni okeru jiko baji no teiten hoji seigyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Kijima, K; Murata, W; Furukawa, Y [Kyushu University, Fukuoka (Japan). Faculty of Engineering

1996-04-10

In direct hoisting work in suspension bridge construction, since a cable crane directly hoists a bridge beam block put on a barge on the sea, precise fixed position holding function is required for a barge. The control system was then designed on the basis of an ILQ control theory, and the effect of change in time constant as design parameter on fixed position holding performance was studied. In addition, the critical disturbance for fixed position holding control was studied through numerical simulation under various disturbance conditions using the above designed control system. As a result, in the design of control systems on the basis of an ILQ control theory, the precise control system could be designed by diminishing, in particular, the time constant for state variable around a z axis among time constants according to the extent of disturbance. The control performance was largely affected by response delay period from sensing of disturbance to beginning of control. 3 refs., 7 figs., 2 tabs.

Ship Vibrations

DEFF Research Database (Denmark)

Sørensen, Herman

1997-01-01

Methods for calculating natural frequencies for ship hulls and for plates and panels.Evaluation of the risk for inconvenient vibrations on board......Methods for calculating natural frequencies for ship hulls and for plates and panels.Evaluation of the risk for inconvenient vibrations on board...

A Novel Fusion-Based Ship Detection Method from Pol-SAR Images

Directory of Open Access Journals (Sweden)

Wenguang Wang

2015-09-01

Full Text Available A novel fusion-based ship detection method from polarimetric Synthetic Aperture Radar (Pol-SAR images is proposed in this paper. After feature extraction and constant false alarm rate (CFAR detection, the detection results of HH channel, diplane scattering by Pauli decomposition and helical factor by Barnes decomposition are fused together. The confirmed targets and potential target pixels can be obtained after the fusion process. Using the difference degree of the target, potential target pixels can be classified. The fusion-based ship detection method works accurately by utilizing three different features comprehensively. The result of applying the technique to measured Airborne Synthetic Radar (AIRSAR data shows that the novel detection method can achieve better performance in both ship’s detection and ship’s shape preservation compared to the result of K-means clustering method and the Notch Filter method.

Modeling Stochastic Boundary Conditions in a Coastal Catchment using a Bayesian Network: An Application to the Houston Ship Channel, Texas

Science.gov (United States)

Couasnon, Anaïs; Sebastian, Antonia; Morales-Nápoles, Oswaldo

2017-04-01

Recent research has highlighted the increased risk of compound flooding in the U.S. In coastal catchments, an elevated downstream water level, resulting from high tide and/or storm surge, impedes drainage creating a backwater effect that may exacerbate flooding in the riverine environment. Catchments exposed to tropical cyclone activity along the Gulf of Mexico and Atlantic coasts are particularly vulnerable. However, conventional flood hazard models focus mainly on precipitation-induced flooding and few studies accurately represent the hazard associated with the interaction between discharge and elevated downstream water levels. This study presents a method to derive stochastic boundary conditions for a coastal watershed. Mean daily discharge and maximum daily residual water levels are used to build a non-parametric Bayesian network (BN) based on copulas. Stochastic boundary conditions for the watershed are extracted from the BN and input into a 1-D process-based hydraulic model to obtain water surface elevations in the main channel of the catchment. The method is applied to a section of the Houston Ship Channel (Buffalo Bayou) in Southeast Texas. Data at six stream gages and two tidal stations are used to build the BN and 100-year joint return period events are modeled. We find that the dependence relationship between the daily residual water level and the mean daily discharge in the catchment can be represented by a Gumbel copula (Spearman's rank correlation coefficient of 0.31) and that they result in higher water levels in the mid- to upstream reaches of the watershed than when modeled independently. This indicates that conventional (deterministic) methods may underestimate the flood hazard associated with compound flooding in the riverine environment and that such interactions should not be neglected in future coastal flood hazard studies.

Recycling of merchant ships

Directory of Open Access Journals (Sweden)

Magdalena Klopott

2013-12-01

Full Text Available The article briefly outlines the issues concerning ship recycling. It highlights ships' high value as sources of steel scrap and non-ferrous metals, without omitting the fact that they also contain a range of hazardous substances. Moreover, the article also focuses on basic ship demolition methods and their environmental impact, as well as emphasizes the importance of “design for ship recycling” philosophy.

Nuclear ships and their safety

Energy Technology Data Exchange (ETDEWEB)

NONE

1961-04-15

Several aspects of nuclear ship propulsion, with special reference to nuclear safety, were discussed at an international symposium at Taormina, Italy, from 14-18 November 1960. Discussions on specific topics are conducted, grouped under the following headings: Economics and National Activities in Nuclear Ship Propulsion; International Problems and General Aspects of Safety for Nuclear Ships; Nuclear Ship Projects from the Angle of Safety; Ship Reactor Problems; Sea Motion and Hull Problems; Maintenance and Refuelling Problems; and Safety Aspects of Nuclear Ship Operation.

Impact of sulfur content regulations of shipping fuel on coastal air quality

Science.gov (United States)

Seyler, André; Wittrock, Folkard; Kattner, Lisa; Mathieu-Üffing, Barbara; Weigelt, Andreas; Peters, Enno; Richter, Andreas; Schmolke, Stefan; Burrows, John P.

2016-04-01

Shipping traffic is a sector that faces an enormous growth rate and contributes substantially to the emissions from the transportation sector, but lacks regulations and controls. Shipping is not enclosed in the Kyoto Protocol. However, the International Maritime Organization (IMO) introduced sufhur limits for marine heavy fuels, nitrogen oxide limits for newly-built ship engines and established Emission Control Areas (ECA) in the North and Baltic Sea as well as around North America with the International Convention for the Prevention of Pollution from Ships (MARPOL 73/78 Annex VI). Recently, on the 1st of January 2015, the allowed sulfur content of marine fuels inside Sulfur Emission Control Areas has been significantly decreased from 1.0% to 0.1%. However, measurements of reactive trace gases and the chemical composition of the marine troposphere along shipping routes are sparse and up to now there is no regular monitoring system available. The project MeSmarT (measurements of shipping emissions in the marine troposphere) is a cooperation between the University of Bremen, the German Federal Maritime and Hydrographic Agency (Bundesamt für Seeschifffahrt und Hydrographie, BSH) and the Helmholtz-Zentrum Geesthacht. This study aims to analyse the influence of shipping emissions on the coastal air quality by evaluating ground-based remote sensing measurements using the MAX-DOAS (Multi AXis Differential Optical Absorption Spectroscopy) technique. Measurements of the atmospheric trace gases nitrogen dioxide (NO2) and sulfur dioxide (SO2) have been carried out in the marine troposphere at the MeSmarT measurement sites in Wedel and on Neuwerk and on-board several ship cruises on the North and Baltic Sea. The capability of two-channel MAX-DOAS systems to do simultaneous measurements in the UV and visible spectral range has been used in the so called "onion-peeling" approach to derive spatial distributions of ship emissions and to analyse the movement of the exhausted

Review of a model to assess stranding of juvenile salmon by ship wakes along the Lower Columbia River, Oregon and Washington

Science.gov (United States)

Kock, Tobias J.; Plumb, John M.; Adams, Noah S.

2013-01-01

Long period wake waves from deep draft vessels have been shown to strand small fish, particularly juvenile Chinook salmon Oncorhynchus tschawytcha, in the lower Columbia River (LCR). The U.S. Army Corps of Engineers is responsible for maintaining the shipping channel in the LCR and recently conducted dredging operations to deepen the shipping channel from an authorized depth of 40 feet(ft) to an authorized depth of 43 ft (in areas where rapid shoaling was expected, dredging operations were used to increase the channel depth to 48 ft). A model was developed to estimate stranding probabilities for juvenile salmon under the 40- and 43-ft channel scenarios, to determine if channel deepening was going to affect wake stranding (Assessment of potential stranding of juvenile salmon by ship wakes along the Lower Columbia River under scenarios of ship traffic and channel depth: Report prepared for the Portland District U.S. Army Corps of Engineers, Portland, Oregon). The U.S. Army Corps of Engineers funded the U.S. Geological Survey to review this model. A total of 30 review questions were provided to guide the review process, and these questions are addressed in this report. In general, we determined that the analyses by Pearson (2011) were appropriate given the data available. We did identify two areas where additional information could have been provided: (1) a more thorough description of model diagnostics and model selection would have been useful for the reader to better understand the model framework; and (2) model uncertainty should have been explicitly described and reported in the document. Stranding probability estimates between the 40- and 43-ft channel depths were minimally different under most of the scenarios that were examined by Pearson (2011), and a discussion of the effects of uncertainty given these minimal differences would have been useful. Ultimately, however, a stochastic (or simulation) model would provide the best opportunity to illustrate

Approximate Method of Calculating Forces on Rudder During Ship Sailing on a Shipping Route

Directory of Open Access Journals (Sweden)

K. Zelazny

2014-09-01

Full Text Available Service speed of a ship in real weather conditions is a basic design parameter. Forecasting of this speed at preliminary design stage is made difficult by the lack of simple but at the same accurate models of forces acting upon a ship sailing on a preset shipping route. The article presents a model for calculating forces and moment on plane rudder, useful for forecasting of ship service speed at preliminary stages of ship design.

Nuclear ship accidents

International Nuclear Information System (INIS)

Oelgaard, P.L.

1993-05-01

In this report available information on 28 nuclear ship accident and incidents is considered. Of these 5 deals with U.S. ships and 23 with USSR ships. The ships are in almost all cases nuclear submarines. Only events that involve the nuclear propulsion plants, radiation exposures, fires/explosions and sea water leaks into the submarines are considered. Comments are made on each of the events, and at the end of the report an attempt is made to point out the weaknesses of the submarine designs which have resulted in the accidents. It is emphasized that much of the available information is of a rather dubious nature. consequently some of the assessments made may not be correct. (au)

Development of the Nuclear Ship Database. 1. Outline of the Nuclear Ship Experimental Database

Energy Technology Data Exchange (ETDEWEB)

Kyouya, Masahiko; Ochiai, Masa-aki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Hashidate, Kouji

1995-03-01

We obtained the experimental data on the effects of the ship motions and the change in load and caused by the ship operations, the waves, the winds etc., to the nuclear power plant behavior, through the Power-up Tests and Experimental Voyages of the Nuclear Ship MUTSU. Moreover, we accumulated the techniques, the knowledge and others on the Nuclear Ship development at the each stage of the N.S. MUTSU Research and Development program, such as the design stage, the construction stage, the operation stage and others. These data, techniques, knowledge and others are the assembly of the experimental data and the experiences through the design, the construction and the operation of the first nuclear ship in JAPAN. It is important to keep and pigeonhole these products of the N.S. MUTSU program in order to utilize them effectively in the research and development of the advanced marine reactor, since there is no construction plan of the nuclear ship for the present in JAPAN. We have been carrying out the development of the Nuclear Ship Database System since 1991 for the purpose of effective utilization of the N.S. MUTSU products in the design study of the advanced marine reactors. The part of the Nuclear Ship Database System on the experimental data, called Nuclear Ship Experimental Database, was already accomplished and utilized since 1993. This report describes the outline and the use of the Nuclear Ship Experimental Database.The remaining part of the database system on the documentary data, called Nuclear Ship Documentary Database, are now under development. (author).

Development of the Nuclear Ship Database. 1. Outline of the Nuclear Ship Experimental Database

International Nuclear Information System (INIS)

Kyouya, Masahiko; Ochiai, Masa-aki; Hashidate, Kouji.

1995-03-01

We obtained the experimental data on the effects of the ship motions and the change in load and caused by the ship operations, the waves, the winds etc., to the nuclear power plant behavior, through the Power-up Tests and Experimental Voyages of the Nuclear Ship MUTSU. Moreover, we accumulated the techniques, the knowledge and others on the Nuclear Ship development at the each stage of the N.S. MUTSU Research and Development program, such as the design stage, the construction stage, the operation stage and others. These data, techniques, knowledge and others are the assembly of the experimental data and the experiences through the design, the construction and the operation of the first nuclear ship in JAPAN. It is important to keep and pigeonhole these products of the N.S. MUTSU program in order to utilize them effectively in the research and development of the advanced marine reactor, since there is no construction plan of the nuclear ship for the present in JAPAN. We have been carrying out the development of the Nuclear Ship Database System since 1991 for the purpose of effective utilization of the N.S. MUTSU products in the design study of the advanced marine reactors. The part of the Nuclear Ship Database System on the experimental data, called Nuclear Ship Experimental Database, was already accomplished and utilized since 1993. This report describes the outline and the use of the Nuclear Ship Experimental Database.The remaining part of the database system on the documentary data, called Nuclear Ship Documentary Database, are now under development. (author)

Dutch Ships and Sailors

NARCIS (Netherlands)

de Boer, Victor; Hoekstra, F.G.; Leinenga, Jurjen; van Rossum, Matthias

2014-01-01

Dutch Ships and Sailors provides an infrastructure for maritime historical datasets, linking correlating data through semantic web technology. It brings together datasets related to recruitment and shipping in the East-India trade (mainly 18th century) and in the shipping of the northern provinces

Reactors. Nuclear propulsion ships

International Nuclear Information System (INIS)

Fribourg, Ch.

2001-01-01

This article has for object the development of nuclear-powered ships and the conception of the nuclear-powered ship. The technology of the naval propulsion P.W.R. type reactor is described in the article B.N.3 141 'Nuclear Boilers ships'. (N.C.)

Constraints on Eurasian ship NOx emissions using OMI NO2 observations and GEOS-Chem

Science.gov (United States)

Vinken, Geert C. M.; Boersma, Folkert; van Donkelaar, Aaron; Zhang, Lin

2013-04-01

Ships emit large quantities of nitrogen oxides (NOx = NO + NO2), important precursors for ozone (O3) and particulate matter formation. Ships burn low-grade marine heavy fuel due to the limited regulations that exist for the maritime sector in international waters. Previous studies showed that global ship NOx emission inventories amount to 3.0-10.4 Tg N per year (15-30% of total NOx emissions), with most emissions close to land and affecting air quality in densely populated coastal regions. Bottom-up inventories depend on the extrapolation of a relatively small number of measurements that are often unable to capture annual emission changes and can suffer from large uncertainties. Satellites provide long-term, high-resolution retrievals that can be used to improve emission estimates. In this study we provide top-down constraints on ship NOx emissions in major European ship routes, using observed NO2 columns from the Ozone Monitoring Instrument (OMI) and NO2 columns simulated with the nested (0.5°×0.67°) version of the GEOS-Chem chemistry transport model. We use a plume-in-grid treatment of ship NOx emissions to account for in-plume chemistry in our model. We ensure consistency between the retrievals and model simulations by using the high-resolution GEOS-Chem NO2 profiles as a priori. We find evidence that ship emissions in the Mediterranean Sea are geographically misplaced by up to 150 km and biased high by a factor of 4 as compared to the most recent (EMEP) ship emission inventory. Better agreement is found over the shipping lane between Spain and the English Channel. We extend our approach and also provide constraints for major ship routes in the Red Sea and Indian Ocean. Using the full benefit of the long-term retrieval record of OMI, we present a new Eurasian ship emission inventory for the years 2005 to 2010, based on the EMEP and AMVER-ICOADS inventories, and top-down constraints from the satellite retrievals. Our work shows that satellite retrievals can

Ship Acquisition of Shipping Companies by Sale & Purchase Activities for Sustainable Growth: Exploratory Fuzzy-AHP Application

Directory of Open Access Journals (Sweden)

Keun-Sik Park

2018-05-01

Full Text Available Strengthening sale and purchase (S&P capacity has become a fundamental requirement for sustainable growth and corporate competitiveness in the modern shipping market. However, there is a lack of research related to S&P and its priority when shipping companies attempt to implement ship acquisition through S&P activities. To fill this gap, this paper conducts an empirical analysis to analyze priority factors during the acquisition of second-hand ships from the perspective of shipping companies. Business criteria are considered to be the most important factors in the analysis of the priority of ship acquisition and investment in shipping companies. To the best of our knowledge, this research is the first exploration covering Korean shipping companies’ ship acquisition through S&P activities. This study is expected to contribute to the better understanding of the role of S&P in ensuring the sustainability of shipping companies and to provide stakeholders with valuable insights.

Outer Dynamics of Ship Collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup

1996-01-01

The purpose is to present analysis procedures for the motion of ships during ship-ship collisions and for ship collisions with offshore structures. The aim is to estimate that part of the lost kinetic energy which will have to be absorbed by rupture and plastic damage of the colliding structures....

Jovian Vortices and Barges: HST observations 1994-1998

Science.gov (United States)

Morales, R.; Sanchez-Lavega, A.; Lecacheux, J.; Colas, F.; Miyazaki, I.

2000-10-01

We have used the HST-WFPC2 archived images of Jupiter in the period 1994-1998 to study the zonal and meridional distributions, long-term motions, lifetimes, interactions and other properties of the vortices larger than 2 degrees. The latitude range covered spans from +75 to -75 degrees. High-resolution images obtained with the 890nm, 410nm and 953nm wavelength filters allowed us to make a morphological classification based on their appearance in each filter. The vortices are anticyclones, and their long-term motions have been completed with ground-based images and are compared to the mean Jovian zonal wind profile. Significant differences are found between the vortex velocities and the mean zonal winds. Some vortices exhibited important drift changes in short period times. We analyze a possible correlation between their size and zonal wind velocity. On the other hand, the "barges" lie in the cyclone domains of the wind-profile and have been identified in several latitudes. Their latitudinal size is similar in all of them (typically 1.6 degrees) but their longitudinal size ranges from 1 to 32 degrees. We discuss the temporal evolution of some of these cyclonic regions. The Spanish team was supported by Gobierno Vasco PI 034/97. The French team was supported by the "Programme National de Planetologie." RM acknowledges a fellowship from Universidad Pais Vasco.

An inter-laboratory trial of the unified BARGE bioaccessibility method for arsenic, cadmium and lead in soil

International Nuclear Information System (INIS)

Wragg, Joanna; Cave, Mark; Basta, Nick; Brandon, Esther; Casteel, Stan; Denys, Sebastien; Gron, Christian; Oomen, Agnes; Reimer, Kenneth; Tack, Karine; Van de Wiele, Tom

2011-01-01

The Bioaccessibility Research Group of Europe (BARGE) has carried out an inter-laboratory trial of a proposed harmonised in vitro physiologically based ingestion bioaccessibility procedure for soils, called the Unified BARGE Method (UBM). The UBM includes an initial saliva phase and simulated stomach and intestine compartments. The trial involved the participation of seven laboratories (five European and two North American) providing bioaccessibility data for As (11 samples), Cd (9 samples) and Pb (13 samples) using soils with in vivo relative bioavailability data measured using a swine model. The results of the study were compared with benchmark criteria for assessing the suitability of the UBM to provide data for human health risk assessments. Mine waste and slag soils containing high concentrations of As caused problems of poor repeatability and reproducibility which were alleviated when the samples were run at lower soil to solution ratios. The study showed that the UBM met the benchmark criteria for both the stomach and stomach and intestine phase for As. For Cd, three out of four criteria were met for the stomach phase but only one for the stomach and intestine phase. For Pb two, out of four criteria were met for the stomach phase and none for the stomach and intestine phase. However, the study recommends tighter control of pH in the stomach phase extraction to improve between-laboratory variability, more reproducible in vivo validation data and that a follow up inter-laboratory trial should be carried out.

An inter-laboratory trial of the unified BARGE bioaccessibility method for arsenic, cadmium and lead in soil

Energy Technology Data Exchange (ETDEWEB)

Wragg, Joanna [British Geological Survey, Nottingham (United Kingdom); Cave, Mark, E-mail: mrca@bgs.ac.uk [British Geological Survey, Nottingham (United Kingdom); Basta, Nick [School of Environment and Natural Resources, Ohio State University, Columbus, OH, 43210-1085 (United States); Brandon, Esther [National Institute for Public Health and the Environment, Bilthoven (Netherlands); Casteel, Stan [College of Veterinary Medicine, University of Missouri, 65205 (United States); Denys, Sebastien [INERIS, Parc Technologique Alata, Verneuil-en-Halatte (France); Gron, Christian [DHI Water Environment Health, Horsholm (Denmark); Oomen, Agnes [National Institute for Public Health and the Environment, Bilthoven (Netherlands); Reimer, Kenneth [Environmental Sciences Group, Royal Military College of Canada, Kingston, Ontario (Canada); Tack, Karine [INERIS, Parc Technologique Alata, Verneuil-en-Halatte (France); Van de Wiele, Tom [Laboratory of Microbial Ecology and Technology, University of Ghent, Ghent (Belgium)

2011-09-01

The Bioaccessibility Research Group of Europe (BARGE) has carried out an inter-laboratory trial of a proposed harmonised in vitro physiologically based ingestion bioaccessibility procedure for soils, called the Unified BARGE Method (UBM). The UBM includes an initial saliva phase and simulated stomach and intestine compartments. The trial involved the participation of seven laboratories (five European and two North American) providing bioaccessibility data for As (11 samples), Cd (9 samples) and Pb (13 samples) using soils with in vivo relative bioavailability data measured using a swine model. The results of the study were compared with benchmark criteria for assessing the suitability of the UBM to provide data for human health risk assessments. Mine waste and slag soils containing high concentrations of As caused problems of poor repeatability and reproducibility which were alleviated when the samples were run at lower soil to solution ratios. The study showed that the UBM met the benchmark criteria for both the stomach and stomach and intestine phase for As. For Cd, three out of four criteria were met for the stomach phase but only one for the stomach and intestine phase. For Pb two, out of four criteria were met for the stomach phase and none for the stomach and intestine phase. However, the study recommends tighter control of pH in the stomach phase extraction to improve between-laboratory variability, more reproducible in vivo validation data and that a follow up inter-laboratory trial should be carried out.

Handbook of nuclear ships

International Nuclear Information System (INIS)

1981-03-01

First, the government organs and other organizations related to nuclear ships and their tasks are described. The fundamental plan for the development of nuclear ships had been determined in July, 1963, and was revised three times thereafter. However in December, 1980, new determination to carry out the research works also was made. The course of the construction of the nuclear ship ''Mutsu'' from 1955 to 1980, the main particulars of the nuclear ship ''Mutsu'' and the drawing of the general arrangement are shown. The designated port for berthing the Mutsu was completed in 1972 in Ominato, Aomori Prefecture, but after the happening of radiation leak during the trial operation of the Mutsu in 1974, it was agreed to remove the port. The main works to be carried out at the port and the port facilities are explained. The progress of the examination of safety of the Mutsu and the result, the test of raising the power output carried out in 1974, and the course of selecting the port for making the repair works of the Mutsu are described. The law concerning Japan Nuclear Ship Research and Development Agency had been instituted in 1963, and was revised four times thereafter. The change of the budget for the tests and researches related to nuclear ships in Japan is shown. The state of development of nuclear ships in foreign countries, the international organs related to atomic energy, shipping, shipbuilding and energy, and chronological table are introduced. (Kako, I.)

The salvaging of the Mont Louis cargo ship

International Nuclear Information System (INIS)

Vastel, D.

1985-01-01

On Saturday the 25th of August 1984, at 2:20 P.M., the German car ferry Olau Britannia with 800 passengers aboard rammed the rear starboard side of the French cargo ship Mont Louis. The collision occurred in the English Channel at a point 18 kilometers north of Ostend. At 7:00 P.M. the Mont Louis sank to a depth of 15 meters at a distance of several miles by rail from Antwerp. Half the ship's hull lay uncovered at low tide. The cargo included 30 type 48-Y containers, each filled with 12 tons of UF 6 , and 22 empty type 30-B containers for return of the enriched uranium. The UF 6 was to be enriched to 4% in the Soviet Union for use as fuel in nuclear power plants. The table below details the nature of the UF 6 . After salvaging operation the containers have been inspected and no damage or leaks have been detected. The accident involved no risk of radioactive or chemical contamination of the sea water. The systematic misinformation campaign by Greenpeace and news media is briefly described. (orig./HP)

Outer Dynamics of Ship Collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup

1996-01-01

The purpose of these notes is to present analysis procedures for the motion of ships during ship-ship collisions and for ship collisons with offshore structures. The aim is to estimate that part of the lost kinetic energy which will have to be absorbed by rupture and plastic damage of the colliding...

PTM Modeling of Dredged Suspended Sediment at Proposed Polaris Point and Ship Repair Facility CVN Berthing Sites - Apra Harbor, Guam

Science.gov (United States)

2017-09-01

sedimentation outside of the channel footprint. For example, dredging near the edge of the footprint can be confined to time periods when tidal currents...Cases 1 or 2 due to the lower loss rate. Sedimentation rates outside the channel prism are further reduced because all sediment is introduced in the...ER D C/ CH L TR -1 7- 16 PTM Modeling of Dredged Suspended Sediment at Proposed Polaris Point and Ship Repair Facility CVN Berthing

On Impact Mechanics in Ship Collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Zhang, Shengming

1998-01-01

The purpose of this paper is to present analytical, closed-form expressions for the energy released for crushing and the impact impulse during ship collisions. Ship-ship collisions, ship collisions with rigid walls and ship collisions with flexible offshore structures are considered. The derived ...

76 FR 31985 - Irving Oil Limited and Irving Oil Terminals Inc.; Analysis of Proposed Agreement Containing...

Science.gov (United States)

2011-06-02

.... Finally, the proposed Consent Agreement imposes firewall and monitor provisions to prevent Irving from... is generally less costly than shipping it from domestic ports on smaller barges, most Maine suppliers... anticompetitive effects of the original transaction. Entering these markets is costly, difficult, and unlikely due...

Agent Technology supports Inter-Organizational Planning in the Port

NARCIS (Netherlands)

J.M. Moonen (Hans); B. van de Rakt (Bastiaan); I. Miller; J.A.E.E. van Nunen (Jo); J. van Hillegersberg (Jos)

2005-01-01

textabstractThe Port of Rotterdam is a key container transshipment hub for Europe. Inland container shipping is important to connect the hinterland (40% market share). Barges visit several terminals per round-trip through the Port, thus requiring a proper planning support – to avoid planning

27 CFR 20.11 - Meaning of terms.

Science.gov (United States)

2010-04-01

..., tank truck, tank ship, or tank barge, or a compartment of any such conveyance, or any other container... to rum. Secretary. The Secretary of the Treasury or his delegate. Special industrial solvents. Solvents which are manufactured with specially denatured alcohol under special industrial solvent general...

Towards a nuclear merchant ship

International Nuclear Information System (INIS)

Nicholson, R.L.R.; Llewelyn, G.I.W.; Farmer, A.A.

1976-01-01

The operation of nuclear merchant ships is likely to be attended by a number of constraints and requirements. Not all of these can be fully resolved until such ships come into use and the necessary experience and confidence have been acquired. But the timing of commercial introduction, if it comes about, will depend on the relative economics of nuclear versus fossil fuel propulsion, and the differences in turn depend in part on the operating costs particular to nuclear ships. A review of operation aspects is essential not only to commercial appraisal; each country whose trade may be carried in nuclear ships - whether it will build such ships or not - will have occasion to give some attention to the problems. It is an international problem and is, as noted later, being considered internationally. This paper; i) reviews some of the operational aspects as seen in the U.K.; ii) summarizes views received by the Nuclear Merchant Ship Unit (NMSU) from U.K. shipping, shipbuilding and nuclear industries on the prospects of a U.K. nuclear merchant ship. (author)

Channel crossing: how are proteins shipped across the bacterial plasma membrane?

Science.gov (United States)

Collinson, Ian; Corey, Robin A; Allen, William J

2015-10-05

The structure of the first protein-conducting channel was determined more than a decade ago. Today, we are still puzzled by the outstanding problem of protein translocation--the dynamic mechanism underlying the consignment of proteins across and into membranes. This review is an attempt to summarize and understand the energy transducing capabilities of protein-translocating machines, with emphasis on bacterial systems: how polypeptides make headway against the lipid bilayer and how the process is coupled to the free energy associated with ATP hydrolysis and the transmembrane protein motive force. In order to explore how cargo is driven across the membrane, the known structures of the protein-translocation machines are set out against the background of the historic literature, and in the light of experiments conducted in their wake. The paper will focus on the bacterial general secretory (Sec) pathway (SecY-complex), and its eukaryotic counterpart (Sec61-complex), which ferry proteins across the membrane in an unfolded state, as well as the unrelated Tat system that assembles bespoke channels for the export of folded proteins. © 2015 The Authors.

Shipping Information Pipeline

DEFF Research Database (Denmark)

Jensen, Thomas; Vatrapu, Ravi

2015-01-01

and national borders within international shipping which is a rather complex domain. The intellectual objective is to generate and evaluate the efficacy and effectiveness of design principles for inter-organizational information infrastructures in the international shipping domain that can have positive...

Risk Modelling for Passages in Approach Channel

Directory of Open Access Journals (Sweden)

Leszek Smolarek

2013-01-01

Full Text Available Methods of multivariate statistics, stochastic processes, and simulation methods are used to identify and assess the risk measures. This paper presents the use of generalized linear models and Markov models to study risks to ships along the approach channel. These models combined with simulation testing are used to determine the time required for continuous monitoring of endangered objects or period at which the level of risk should be verified.

Navy Hospital ships in history

Directory of Open Access Journals (Sweden)

Sougat Ray

2017-01-01

Full Text Available Hospital ships are operated by the Naval forces in or near war zones to provide medical assistance to the wounded personnel of all nationalities and not be used for any military purpose. Hospital ships possibly existed in ancient times and the Athenian Navy had a ship named Therapia. However, it was only during the 17th century that it became a common practice for the naval squadrons to be accompanied by large ships with the facilities of carrying the wounded after each engagement. In 1860, the steamships HMS Melbourne and HMS Mauritius were equipped with genuine medical facilities. They were manned by the Medical Staff Corps and provided services to the British expedition to China. During the World War I and World War II, passenger ships were converted for use as hospital ships and were started to be used on a massive scale. RMS Aquitania and HMHS Britannic were two famous examples of hospital ships used extensively. Modern US hospital ships USNS Mercy and USNS Comfort are operated by Military Sealift Command of the US Navy. Their primary mission is to provide emergency on-site care for US combatant forces deployed in war or other operations.

Marine traffic model based on cellular automaton: Considering the change of the ship's velocity under the influence of the weather and sea

Science.gov (United States)

Qi, Le; Zheng, Zhongyi; Gang, Longhui

2017-10-01

It was found that the ships' velocity change, which is impacted by the weather and sea, e.g., wind, sea wave, sea current, tide, etc., is significant and must be considered in the marine traffic model. Therefore, a new marine traffic model based on cellular automaton (CA) was proposed in this paper. The characteristics of the ship's velocity change are taken into account in the model. First, the acceleration of a ship was divided into two components: regular component and random component. Second, the mathematical functions and statistical distribution parameters of the two components were confirmed by spectral analysis, curve fitting and auto-correlation analysis methods. Third, by combining the two components, the acceleration was regenerated in the update rules for ships' movement. To test the performance of the model, the ship traffic flows in the Dover Strait, the Changshan Channel and the Qiongzhou Strait were studied and simulated. The results show that the characteristics of ships' velocities in the simulations are consistent with the measured data by Automatic Identification System (AIS). Although the characteristics of the traffic flow in different areas are different, the velocities of ships can be simulated correctly. It proves that the velocities of ships under the influence of weather and sea can be simulated successfully using the proposed model.

Partial pressure (or fugacity) of carbon dioxide, salinity and other variables collected from Surface underway observations using Barometric pressure sensor, Carbon dioxide (CO2) gas analyzer and other instruments from NOAA Ship DAVID STARR JORDAN in the Channel Islands National Marine Sanctuary, Cordell Bank National Marine Sanctuary and others from 2007-07-25 to 2007-10-28 (NCEI Accession 0144352)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0144352 includes Surface underway data collected from NOAA Ship DAVID STARR JORDAN in the Channel Islands National Marine Sanctuary, Cordell Bank...

Civilian nuclear ships

International Nuclear Information System (INIS)

Oelgaard, P.L.

1993-03-01

This report contains a review of the information available on nuclear powered ships, built for civilian purposes. In the introduction a short discussion is given of the reasons for the limited use of nuclear ships for these purposes. In the second section a brief review is presented of data for the three experimental/merchant ships build by the United States, Germany and Japan, i.e. NS Savannah, NS Otto Hahn and NS Mutsu. In the third section the Soviet/Russian icebreaker NS Lenin is considered. Its design, operational experience and the introduction of a new nuclear propulsion plant is reviewed. In the fourth section the newer Soviet/Russian icebreakers with nuclear propulsion are considered. Finally design of the Soviet/Russian icebreaker transport/container ship NS Sevmorput is reviewed in the fifth section. The future Russian plans for nuclear vessels for the arctic waters are briefly discussed. (au)

Fast shoreline erosion induced by ship wakes in a coastal lagoon: Field evidence and remote sensing analysis.

Directory of Open Access Journals (Sweden)

Luca Zaggia

Full Text Available An investigation based on in-situ surveys combined with remote sensing and GIS analysis revealed fast shoreline retreat on the side of a major waterway, the Malamocco Marghera Channel, in the Lagoon of Venice, Italy. Monthly and long-term regression rates caused by ship wakes in a reclaimed industrial area were considered. The short-term analysis, based on field surveys carried out between April 2014 and January 2015, revealed that the speed of shoreline regression was insignificantly dependent on the distance from the navigation channel, but was not constant through time. Periods of high water levels due to tidal forcing or storm surges, more common in the winter season, are characterized by faster regression rates. The retreat is a discontinuous process in time and space depending on the morpho-stratigraphy and the vegetation cover of the artificial deposits. A GIS analysis performed with the available imagery shows an average retreat of 3-4 m/yr in the period between 1974 and 2015. Digitization of historical maps and bathymetric surveys made in April 2015 enabled the construction of two digital terrain models for both past and present situations. The two models have been used to calculate the total volume of sediment lost during the period 1968-2015 (1.19×106 m3. The results show that in the presence of heavy ship traffic, ship-channel interactions can dominate the morphodynamics of a waterway and its margins. The analysis enables a better understanding of how shallow-water systems react to the human activities in the post-industrial period. An adequate evaluation of the temporal and spatial variation of shoreline position is also crucial for the development of future scenarios and for the sustainable management port traffic worldwide.

Fast shoreline erosion induced by ship wakes in a coastal lagoon: Field evidence and remote sensing analysis.

Science.gov (United States)

Zaggia, Luca; Lorenzetti, Giuliano; Manfé, Giorgia; Scarpa, Gian Marco; Molinaroli, Emanuela; Parnell, Kevin Ellis; Rapaglia, John Paul; Gionta, Maria; Soomere, Tarmo

2017-01-01

An investigation based on in-situ surveys combined with remote sensing and GIS analysis revealed fast shoreline retreat on the side of a major waterway, the Malamocco Marghera Channel, in the Lagoon of Venice, Italy. Monthly and long-term regression rates caused by ship wakes in a reclaimed industrial area were considered. The short-term analysis, based on field surveys carried out between April 2014 and January 2015, revealed that the speed of shoreline regression was insignificantly dependent on the distance from the navigation channel, but was not constant through time. Periods of high water levels due to tidal forcing or storm surges, more common in the winter season, are characterized by faster regression rates. The retreat is a discontinuous process in time and space depending on the morpho-stratigraphy and the vegetation cover of the artificial deposits. A GIS analysis performed with the available imagery shows an average retreat of 3-4 m/yr in the period between 1974 and 2015. Digitization of historical maps and bathymetric surveys made in April 2015 enabled the construction of two digital terrain models for both past and present situations. The two models have been used to calculate the total volume of sediment lost during the period 1968-2015 (1.19×106 m3). The results show that in the presence of heavy ship traffic, ship-channel interactions can dominate the morphodynamics of a waterway and its margins. The analysis enables a better understanding of how shallow-water systems react to the human activities in the post-industrial period. An adequate evaluation of the temporal and spatial variation of shoreline position is also crucial for the development of future scenarios and for the sustainable management port traffic worldwide.

46 CFR 151.50-6 - Motor fuel antiknock compounds.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Motor fuel antiknock compounds. 151.50-6 Section 151.50... BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-6 Motor fuel antiknock compounds. When transporting motor fuel antiknock compounds containing tetraethyl lead and...

International Standardization in the Design of "Shore to Ship" - Power Supply Systems of Ships in Port

Science.gov (United States)

Tarnapowicz, Dariusz; German-Galkin, Sergiej

2018-03-01

The decisive source of air pollution emissions in ports is the berthed ships. This is primarily caused by the work of ship's autonomous generator sets. One way of reducing the air pollution emissions in ports is the supply of ships from electricity inland system. The main problem connected with the power connection of ships to the inland network is caused by different values of levels and frequencies of voltages in these networks (in various countries) in relation to different values of levels and frequencies of voltages present in the ship's network. It is also important that the source power can range from a few hundred kW up to several MW. In order to realize a universal „Shore to Ship" system that allows the connection of ships to the electricity inland network, the international standardization is necessary. This article presents the current recommendations, standards and regulations for the design of „Shore to Ship" systems.

Thermo-hydraulic characteristics of ship propulsion reactor in the conditions of ship motions and safety assessment

International Nuclear Information System (INIS)

Kobayashi, Michiyuki; Murata, Hiroyuki; Sawada, Kenichi; Inasaka, Fujio; Aya, Izuo; Shiozaki, Koki

1999-01-01

By inputting the experimental data, information and others on thermo-hydraulic characteristics of integrated ship propulsion reactor accumulated hitherto by the Ship Research Institute and some recent cooperation results into the nuclear ship engineering simulation system, it was conducted not only to contribute an improvement study on next ship reactor by executing general analysis and evaluation on motion characteristics under ship body motion conditions, safety at accidents, and others of the integrated ship reactor but also to investigate and prepare some measures to apply fundamental experiment results based on obtained here information to safety countermeasure of the nuclear ships. In 1997 fiscal year, on safety of the integrated ship propulsion reactor loading nuclear ship, by adding experimental data on unstable flow analysis and information on all around of the analysis to general data base fundamental program, development to intellectual data base program was intended; on effect of pulsation flow on thermo-hydraulic characteristics of ship propulsion reactor; after pulsation flow visualization experiment, experimental equipment was reconstructed into heat transfer type to conduct numerical analysis of pulsation flow by confirming validity of numerical analysis code under comparison with the visualization experiment results; and on thermo-hydraulic behavior in storage container at accident of active safety type ship propulsion reactor; a flashing vibration test using new apparatus finished on its higher pressurization at last fiscal year to examine effects of each parameter such as radius and length of exhausting nozzle and pool water temperature. (G.K.)

Recent results of experiments at SHIP

International Nuclear Information System (INIS)

Hofmann, S.

1997-10-01

The new elements 110, 111 and 112 were synthesized and unambiguously identified in experiments at SHIP. The decay data were compared with the predictions of theoretical models. Good agreement was obtained for the nuclei up to element Z=112. Theory predicts deformed nuclei with minimum (negative) shell-correction energy at Z=108 and N=162. Candidates for an experimental investigation of spherical superheavy nuclei (SHE) are selected on the basis of the predictions of the nuclear models and extrapolation of experimental results. The production cross-sections up to element Z=112 were measured, partly accurate excitation functions were obtained. The data allow to fix a narrow energy window for production of SHE by ln-emission channels. Possibilities to broaden the energy window by radiative capture reactions, use of neutron deficient projectile isotopes and use of actinide targets are discussed. (orig.)

Mechanical lift of profile

Energy Technology Data Exchange (ETDEWEB)

O`Mahoney, H.

1999-04-01

Continuous ship unloaders (CSUs) are continuing to become more popular than grab unloaders for dealing with greater capacities of coal. The article surveys current major manufacturers` equipment. Krupp Foerdertechnik, for example, offers seven mechanical ship unloaders, including CSU with scraper chain or L-shaped bucket-elevators, CSU with vertical screw conveyor and horizontal screw-type feeder conveyors. CSU with bucket-elevator and feeding scraper and a continuous barge unloader with bucket elevator, BMH Marine Siwertell continues to be the benchmark for technology advances. HW Carlsan has recently entered the field with a new screw-type ship unloader. 4 photos.

Nuclear structure studies in the seaborgium region at SHIP

Energy Technology Data Exchange (ETDEWEB)

Antalic, S., E-mail: Stanislav.Antalic@fmph.uniba.sk; Andel, B. [Comenius University in Bratislava, 84248 Bratislava (Slovakia); Heßberger, F. P.; Khuyagbaatar, J. [GSI - Helmhotzzentrum für Schwerionenforschung GmbH, 64291 Darmstadt (Germany); Helmholtz Institute in Mainz, 55099 Mainz (Germany); Ackermann, D. [GSI - Helmhotzzentrum für Schwerionenforschung GmbH, 64291 Darmstadt (Germany); GANIL, 14074 Caen (France); Heinz, S.; Hofmann, S.; Kindler, B.; Laatiaoui, M.; Lommel, B. [GSI - Helmhotzzentrum für Schwerionenforschung GmbH, 64291 Darmstadt (Germany); Kalaninová, Z. [Comenius University in Bratislava, 84248 Bratislava (Slovakia); Laboratory of Nuclear Problems, JINR, 141980 Dubna (Russian Federation); Piot, J.; Vostinar, M. [GANIL, 14074 Caen (France)

2015-10-15

New decay data for the isotopes {sup 259}Sg and {sup 255}Rf were obtained at the velocity filter SHIP using an α-decay spectroscopy measurement. Both isotopes were produced and studied via a one neutron evaporation channel in the compound fusion reaction {sup 54}Cr+{sup 208}Pb. New isomeric states were observed and the single-particle level systematics for isotones with 151 and 153 neutrons were extended. A change of the ground-state configuration for the heaviest N = 151 isotones was observed. Detailed Monte-Carlo simulation for the α decay of {sup 259}Sg applying the GEANT4 toolkit was performed and compared with experimental data.

The Human Element and Autonomous Ships

Directory of Open Access Journals (Sweden)

Sauli Ahvenjärvi

2016-09-01

Full Text Available The autonomous ship technology has become a “hot” topic in the discussion about more efficient, environmentally friendly and safer sea transportation solutions. The time is becoming mature for the introduction of commercially sensible solutions for unmanned and fully autonomous cargo and passenger ships. Safety will be the most interesting and important aspect in this development. The utilization of the autonomous ship technology will have many effects on the safety, both positive and negative. It has been announced that the goal is to make the safety of an unmanned ship better that the safety of a manned ship. However, it must be understood that the human element will still be present when fully unmanned ships are being used. The shore-based control of a ship contains new safety aspects and an interesting question will be the interaction of manned and unmanned ships in the same traffic area. The autonomous ship technology should therefore be taken into account on the training of seafarers. Also it should not be forgotten that every single control algorithm and rule of the internal decision making logic of the autonomously navigating ship has been designed and coded by a human software engineer. Thus the human element is present also in this point of the lifetime navigation system of the autonomous ship.

On impact mechanics in ship collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Zhang, Shengming

1998-01-01

The purpose of this paper is to present analytical, closed-form expressions for the energy released for crushing and the impact impulse during ship collisions. Ship–ship collisions, ship collisions with rigid walls and ship collisions with flexible offshore structures are considered. The derived ...

Advanced Demonstration of Motion Correction for Ship-to-Ship Passive Inspections

Energy Technology Data Exchange (ETDEWEB)

Ziock, Klaus-Peter [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Boehnen, Chris Bensing [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ernst, Joseph [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2013-09-30

Passive radiation detection is a key tool for detecting illicit nuclear materials. In maritime applications it is most effective against small vessels where attenuation is of less concern. Passive imaging provides: discrimination between localized (threat) and distributed (non-threat) sources, removal of background fluctuations due to nearby shorelines and structures, source localization to an individual craft in crowded waters, and background subtracted spectra. Unfortunately, imaging methods cannot be easily applied in ship-to-ship inspections because relative motion of the vessels blurs the results over many pixels, significantly reducing sensitivity. This is particularly true for the smaller water craft where passive inspections are most valuable. In this project we performed tests and improved the performance of an instrument (developed earlier under, “Motion Correction for Ship-to-Ship Passive Inspections”) that uses automated tracking of a target vessel in visible-light images to generate a 3D radiation map of the target vessel from data obtained using a gamma-ray imager.

An assessment of simplified methods to determine damage from ship-to-ship collisions

International Nuclear Information System (INIS)

Parks, M.B.; Ammerman, D.J.

1996-01-01

Sandia National Laboratories (SNL) is studying the safety of shipping, radioactive materials (RAM) by sea, the SeaRAM project (McConnell, et al. 1995), which is sponsored by the US Department of Energy (DOE). The project is concerned with the potential effects of ship collisions and fires on onboard RAM packages. Existing methodologies are being assessed to determine their adequacy to predict the effect of ship collisions and fires on RAM packages and to estimate whether or not a given accident might lead to a release of radioactivity. The eventual goal is to develop a set of validated methods, which have been checked by comparison with test data and/or detailed finite element analyses, for predicting the consequences of ship collisions and fires. These methods could then be used to provide input for overall risk assessments of RAM sea transport. The emphasis of this paper is on methods for predicting- effects of ship collisions

High cost for drilling ships

International Nuclear Information System (INIS)

Hooghiemstra, J.

2007-01-01

Prices for the rent of a drilling ship are very high. Per day the rent is 1% of the price for building such a ship, and those prices have risen as well. Still, it is attractive for oil companies to rent a drilling ship [nl

Accidents in nuclear ships

Energy Technology Data Exchange (ETDEWEB)

Oelgaard, P L [Risoe National Lab., Roskilde (Denmark); [Technical Univ. of Denmark, Lyngby (Denmark)

1996-12-01

This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10{sup -3} per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au).

Accidents in nuclear ships

International Nuclear Information System (INIS)

Oelgaard, P.L.

1996-12-01

This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10 -3 per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au)

Trends of shipping markets development

Directory of Open Access Journals (Sweden)

Tomasz Nowosielski

2012-06-01

Full Text Available Shipping markets are dependent on international trade transactions that generate transport needs. These needs can dynamically change depending on global natural resources and commodity markets situation. The changes affecting shipping markets can also be caused by changes to the existing cargo flows and by establishing new ones in different geographies. It is anticipated that in the future shipping markets will change, visible by a decline in shipping in North America and Europe and an increase in Asia.

Advanced ship systems condition monitoring for enhanced inspection, maintenance and decision making in ship operations

OpenAIRE

Lazakis, Iraklis; Dikis, Konstantinos; Michala, Anna Lito; Theotokatos, Gerasimos

2016-01-01

Structural and machinery failures in the day-to-day ship operations may lead to major accidents, endangering crew and\\ud passengers onboard, posing a threat to the environment, damaging the ship itself and having a great impact in terms of business\\ud losses. In this respect, this paper presents the INCASS (Inspection Capabilities for Enhanced Ship Safety) project which aims\\ud bringing an innovative solution to the ship inspection regime through the introduction of enhanced inspection of shi...

Guide to ship sanitation

National Research Council Canada - National Science Library

2011-01-01

"The third edition of the Guide to Ship Sanitation presents the public health significance of ships in terms of disease and highlights the importance of applying appropriate control measures"--Back cover...

Cybersecurity Framework for Ship Industrial Control System

OpenAIRE

Maule, R. William; Hake, Joseph

2016-01-01

Ship mechanical and electrical control systems, and the communications grid through which these devices operate, are a high priority concern for Navy leadership. Ship systems use microprocessor-based controls to interface with physical objects, and Programmable Logic Controllers (PLCs) to automate ship electromechanical processes. Ship operations are completely dependent on these devices. The commercial security products upon which ships depend do not work on ICS, leaving ships vulnerable. Th...

Partial pressure (or fugacity) of carbon dioxide, salinity and other variables collected from Surface underway observations using Carbon dioxide (CO2) gas analyzer, Shower head chamber equilibrator for autonomous carbon dioxide (CO2) measurement and other instruments from NOAA Ship RONALD H. BROWN in the Caribbean Sea, Channel Islands National Marine Sanctuary and others from 1997-07-28 to 1997-11-14 (NODC Accession 0081011)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0081011 includes Surface underway, chemical, meteorological and physical data collected from NOAA Ship RONALD H. BROWN in the Caribbean Sea, Channel...

Containment of spills from ships

International Nuclear Information System (INIS)

Engerer, M.J.

1992-01-01

Oil escaping from a ship is contained within a limited area surrounding the ship by means of a flexible ring structure. The ring structure is stored in a collapsed state in a compartment extending around the ship. In response to an oil spill, the ring structure is dropped from the compartment and immediately surrounds the ship. A circular inflatable flotation section of the ring structure is charged with gas under pressure. The gas is supplied from a bottle cascade aboard the ship, through lines preconnected to the flotation section and paid out from free-wheeling reels. The flotation section supports a thin circumferential wall of predetermined height that submerges and assumes a vertical cylinder-like shape surrounding the escaping oil. The oil floats within the confines of the ring structure, and the ring structure is progressively expanded to a predetermined size selected to accommodate the total volume of oil carried by the ship. When the ring structure achieves its expanded state, pressure in the flotation section is raised to render the structure relatively rigid and resistant to collapse in response to wave action. Oil can be removed from the interior of the ring structure by recovery ships using suction lines or other conventional recovery methods. 12 figs

Real-Time Simulation of Ship-Structure and Ship-Ship Interaction

DEFF Research Database (Denmark)

Lindberg, Ole; Glimberg, Stefan Lemvig; Bingham, Harry B.

2013-01-01

, because it is simple, easy to implement and computationally efficient. Multiple many-core graphical processing units (GPUs) are used for parallel execution and the model is implemented using a combination of C/C++, CUDA and MPI. Two ship hydrodynamic cases are presented: Kriso Container Carrier at steady...

40 CFR 60.301 - Definitions.

Science.gov (United States)

2010-07-01

... capacity of more than 88,100 m3 (ca. 2.5 million U.S. bushels), except those located at animal food manufacturers, pet food manufacturers, cereal manufacturers, breweries, and livestock feedlots. (d) Permanent... grain is transferred from a truck, railcar, barge, or ship to a receiving hopper. (k) Grain loading...

EX1001 Ship Shakedown (EX1001, EM302) on NOAA Ship Okeanos Explorer in Hawaiian Islands

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The ship has been alongside for repairs and leave since November, 2009. The ship shakedown cruise is scheduled to provide an opportunity for the ship to get underway...

Partial pressure (or fugacity) of carbon dioxide, salinity and other variables collected from Surface underway observations using Carbon dioxide (CO2) gas analyzer, Shower head chamber equilibrator for autonomous carbon dioxide (CO2) measurement and other instruments from NOAA Ship RONALD H. BROWN in the Bering Sea, Channel Islands National Marine Sanctuary and others from 2001-02-07 to 2001-12-03 (NODC Accession 0081015)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0081015 includes Surface underway, chemical and physical data collected from NOAA Ship RONALD H. BROWN in the Bering Sea, Channel Islands National...

46 CFR 148.02-1 - Shipping papers.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Shipping papers. 148.02-1 Section 148.02-1 Shipping... MATERIALS IN BULK Vessel Requirements § 148.02-1 Shipping papers. (a) Carriers may not accept for..., unless the hazardous materials offered for such shipment is accompanied by a shipping paper on which the...

Naval Ship Database: Database Design, Implementation, and Schema

Science.gov (United States)

2013-09-01

ClassId Class identifier Name Ship name Pendant Ship pendant CommissionDate Ship commission date DecommissionDate Ship decommission date; NULL if still...active FlagshipId Ship Id of the ship Figure 3: Ship table definition Table 3: Ship table example rows Id Prefix ClassId Name Pendant ...computation if required. A bridged connection will allow computation analysis to be done in Matlab and allow the processed data to be imported back

A Study of Stranding of Juvenile Salmon by Ship Wakes Along the Lower Columbia River Using a Before-and-After Design: Before-Phase Results

Energy Technology Data Exchange (ETDEWEB)

Pearson, Walter H.; Skalski, J R.; Sobocinski, Kathryn L.; Miller, Martin C.; Johnson, Gary E.; Williams, Greg D.; Southard, John A.; Buchanan, Rebecca A.

2006-02-01

Ship wakes produced by deep-draft vessels transiting the lower Columbia River have been observed to cause stranding of juvenile salmon. Proposed deepening of the Columbia River navigation channel has raised concerns about the potential impact of the deepening project on juvenile salmon stranding. The Portland District of the U.S. Army Corps of Engineers requested that the Pacific Northwest National Laboratory design and conduct a study to assess stranding impacts that may be associated with channel deepening. The basic study design was a multivariate analysis of covariance of field observations and measurements under a statistical design for a before and after impact comparison. We have summarized field activities and statistical analyses for the ?before? component of the study here. Stranding occurred at all three sampling sites and during all three sampling seasons (Summer 2004, Winter 2005, and Spring 2005), for a total of 46 stranding events during 126 observed vessel passages. The highest occurrence of stranding occurred at Barlow Point, WA, where 53% of the observed events resulted in stranding. Other sites included Sauvie Island, OR (37%) and County Line Park, WA (15%). To develop an appropriate impact assessment model that accounted for relevant covariates, regression analyses were conducted to determine the relationships between stranding probability and other factors. Nineteen independent variables were considered as potential factors affecting the incidence of juvenile salmon stranding, including tidal stage, tidal height, river flow, current velocity, ship type, ship direction, ship condition (loaded/unloaded), ship speed, ship size, and a proxy variable for ship kinetic energy. In addition to the ambient and ship characteristics listed above, site, season, and fish density were also considered. Although no single factor appears as the primary factor for stranding, statistical analyses of the covariates resulted in the following equations: (1) Stranding

Ship Technology Workshop Materials from Collaboration with Mexico to Reduce Emissions from Ships

Science.gov (United States)

On September 26, 2012, a ship technology seminar was held to provide Mexican stakeholders with information about some of the ship technologies needed to meet the requirements of MARPOL Annex VI and an ECA.

DESAIN SELF-PROPELLED CAR BARGE UNTUK DISTRIBUSI MOBIL BARU RUTE CIKARANG BEKASI LAUT (CBL – TANJUNG PERAK

Directory of Open Access Journals (Sweden)

Bintang Jiwa Jiwa

2017-01-01

Full Text Available Berbagai upaya telah dilakukan Pemerintah untuk dapat mengurangi kemacetan jalur Pantura. Mulai dari pemberian jalur alternatif, pelebaran jalan, hingga pembuatan jalan tol baru. Segala upaya tersebut tidak sebanding dengan jumlah kendaraan yang terus meningkat melewati jalur Pantura, khususnya kendaraan-kendaraan barang seperti truk dan kontainer. Hal ini tidak terlepas dari geliat perekonomian yang terus tumbuh. Kawasan industri otomotif di sekitar Cikarang dan Bekasi salah satu contohnya. Jumlah produksi mobil domestik dan permintaan yang terus meningkat ini membutuhkan sarana yang baik dan cepat dalam mendistribusikan mobil baru ke berbagai daerah. Dalam beberapa tahun ini, Jawa Timur merupakan provinsi dengan tingkat permintaan mobil yang cukup tinggi di Indonesia. Oleh karena itu, salah satu solusi yang ditawarkan untuk dapat mengurangi kemacetan di jalur darat adalah berupa pengalihan transportasi darat ke sungai atau laut. Berdasarkan solusi tersebut, maka dibutuhkan alat transportasi pengangkut barang, dalam hal ini mobil, yang dapat melewati sungai dan laut. Self-propelled car barge diharapkan mampu menjadi inovasi yang cukup baik dalam mendistribusikan barang melalui rute Sungai Cikarang Bekasi Laut (CBL menuju ke Pelabuhan Tanjung Perak. Untuk mendapatkan ukuran utama yang optimum digunakan metode optimation design approach dengan bantuan fitur solver pada program Microsoft Excel dengan menjadikan biaya pembangunan paling minimum sebagai fungsi objektif, serta adanya batasan-batasan dari persyaratan teknis dan regulasi yang ada. Dari proses optimisasi, didapatkan ukuran utama optimum Self-Propelled Car Barge adalah L=53.10 m, B=15.17 m, TFW=3.09 m, TSW=3.02 m, dan H=4.66 m, dengan estimasi biaya pembangunan sebesar $1.435.270,56 atau setara Rp.19.281.424.757,10.

Fast ship

OpenAIRE

Keuning, J.A.

2014-01-01

The invention concerns a ship whereby the hull and the mechanical propulsion device are designed such that the Froude number is larger than 0.5. In the aft ship the hull has a bottom with V-shaped bottom surfaces with a deadrise angle that is less than 40 degrees and the hull has substantially vertical sides. In the hull are a passenger compartment and a trim tank. The trim tank volume is such that the weight of a filled trim tank is more than 30 % of the weight of displacement of the hull wi...

Interface for Barge-in Free Spoken Dialogue System Based on Sound Field Reproduction and Microphone Array

Directory of Open Access Journals (Sweden)

Hinamoto Yoichi

2007-01-01

Full Text Available A barge-in free spoken dialogue interface using sound field control and microphone array is proposed. In the conventional spoken dialogue system using an acoustic echo canceller, it is indispensable to estimate a room transfer function, especially when the transfer function is changed by various interferences. However, the estimation is difficult when the user and the system speak simultaneously. To resolve the problem, we propose a sound field control technique to prevent the response sound from being observed. Combined with a microphone array, the proposed method can achieve high elimination performance with no adaptive process. The efficacy of the proposed interface is ascertained in the experiments on the basis of sound elimination and speech recognition.

Optimization in liner shipping

DEFF Research Database (Denmark)

Brouer, Berit Dangaard; Karsten, Christian Vad; Pisinger, David

2017-01-01

Seaborne trade is the lynchpin in almost every international supply chain, and about 90% of non-bulk cargo worldwide is transported by container. In this survey we give an overview of data-driven optimization problems in liner shipping. Research in liner shipping is motivated by a need for handling...... still more complex decision problems, based on big data sets and going across several organizational entities. Moreover, liner shipping optimization problems are pushing the limits of optimization methods, creating a new breeding ground for advanced modelling and solution methods. Starting from liner...... shipping network design, we consider the problem of container routing and speed optimization. Next, we consider empty container repositioning and stowage planning as well as disruption management. In addition, the problem of bunker purchasing is considered in depth. In each section we give a clear problem...

Ship construction and welding

CERN Document Server

Mandal, Nisith R

2017-01-01

This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and form...

Potential of biofuels for shipping. Final Report

Energy Technology Data Exchange (ETDEWEB)

Florentinus, A.; Hamelinck, C.; Van den Bos, A.; Winkel, R.; Cuijpers, M. [Ecofys Netherlands, Utrecht (Netherlands)

2012-01-15

Biofuels could be one of the options to realize a lower carbon intensity in the propulsion of ships and also possibly reduce the effect of ship emissions on local air quality. Therefore, EMSA, the European Maritime Safety Agency, is evaluating if and how biofuels could be used in the shipping sector as an alternative fuel. To determine the potential of biofuels for ships, a clearer picture is needed on technical and organizational limitations of biofuels in ships, both on board of the ship as in the fuel supply chain to the ship. Economic and sustainability analysis of biofuels should be included in this picture, as well as an overview on current and potential policy measures to stimulate the use of biofuels in shipping. Ecofys has determined the potential of biofuels, based on analysis of collected data through literature review, own expertise and experiences, direct communication with EMSA, research publications, market developments based on press and other media, and consultations with relevant stakeholders in the shipping market.

Thermo-hydraulic characteristics of ship propulsion reactor in the conditions of ship motions and safety assessment

International Nuclear Information System (INIS)

Kobayashi, Michiyuki; Aya, Izuo; Inasaka, Fujio; Murata, Hiroyuki; Odano, Naoteru; Shiozaki, Koki

1998-01-01

A research project from 1995-1999 had a plan to make experimental studies on (1) safety of nuclear ship loaded with an integral ship propulsion reactor (2) effects of pulsating flow on the thermo-hydraulic characteristics of ship propulsion reactor and (3) thermo-hydraulic behaviors of the reactor container at the time of accident in a passively safe ship propulsion reactor. Development of a data base for ship propulsion reactor was attempted using previous experimental data on the thermo-hydraulic characteristics of the reactor in the institute in addition to the present results aiming to make general analytical evaluation for the safety of the engineering-simulation system for nuclear ship. A general data base was obtained by integrating the data list and the analytical program for static characteristics. A test equipment which allows to visualize the pulsating flow was produced and visualization experiments have started. (M.N.)

A Fully Nonlinear, Dynamically Consistent Numerical Model for Solid-Body Ship Motion. I. Ship Motion with Fixed Heading

Science.gov (United States)

Lin, Ray-Quing; Kuang, Weijia

2011-01-01

In this paper, we describe the details of our numerical model for simulating ship solidbody motion in a given environment. In this model, the fully nonlinear dynamical equations governing the time-varying solid-body ship motion under the forces arising from ship wave interactions are solved with given initial conditions. The net force and moment (torque) on the ship body are directly calculated via integration of the hydrodynamic pressure over the wetted surface and the buoyancy effect from the underwater volume of the actual ship hull with a hybrid finite-difference/finite-element method. Neither empirical nor free parametrization is introduced in this model, i.e. no a priori experimental data are needed for modelling. This model is benchmarked with many experiments of various ship hulls for heave, roll and pitch motion. In addition to the benchmark cases, numerical experiments are also carried out for strongly nonlinear ship motion with a fixed heading. These new cases demonstrate clearly the importance of nonlinearities in ship motion modelling.

A Nonlinear Ship Manoeuvering Model: Identification and adaptive control with experiments for a model ship

Directory of Open Access Journals (Sweden)

Roger Skjetne

2004-01-01

Full Text Available Complete nonlinear dynamic manoeuvering models of ships, with numerical values, are hard to find in the literature. This paper presents a modeling, identification, and control design where the objective is to manoeuver a ship along desired paths at different velocities. Material from a variety of references have been used to describe the ship model, its difficulties, limitations, and possible simplifications for the purpose of automatic control design. The numerical values of the parameters in the model is identified in towing tests and adaptive manoeuvering experiments for a small ship in a marine control laboratory.

Effect of Buffer Bow Structure in Ship-Ship Collision

DEFF Research Database (Denmark)

Yamada, Yasuhira; Endo, Hisayoshi; Pedersen, Preben Terndrup

2008-01-01

tankers, the introduction of buffer bulbous bows has been proposed. Relatively soft buffer bows absorb part of the kinetic energy of the striking ship before penetrating the inner hull of the struck vessel. The purpose of the present paper is to verify the effectiveness of a prototype buffer bulbous bow......) and the forward velocity of the struck ship on the collapse mode of the bow of the striking vessel are investigated. Collapse modes, contact forces and energy absorption capabilities of the buffer bows are compared with those of conventional bows....

Feasibility and Practical Limits for the Use of Lightweight Prestressed Concrete (LWPC) as a Shipbuilding Material.

Science.gov (United States)

1982-10-01

estressed Conclrete Barges, Nippon Kaiji Kyokai 1975. 15. Mast, R. F. , "Des ign Cr’iteria - ARCO Prest ressed Concr’ete Hull" paper presented to U.S. Coast...the monolithic character of all-welded steel ship’s hulls, where a brittle fracture could spread with catastruphic consequences, prestressed conicrete

Monitor of Energetic Saving. Final measurements; Monitor VoortVarend Besparen. Eindmeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-05-15

In 2007, the Dutch Ministry of Waterways and Public Works (currently the Ministry of Infrastructure and Environment) launched the multi-annual plan 'Voortvarend Besparen 2007-2010' (Energetic Saving) that aims to stimulate captains of barges into more energy efficient sailing behavior. The program aims to encourage energy efficient operation of ships, resulting in a fuel saving and a 5% reduction in CO2 emissions in inland shipping in 2010 compared to 2007. In the final measurement, questionnaires were sent to the barge skippers to find out if the inland shipping sector succeeded in realizing the target and to examine to what extent the Energetic Saving program contributed to the CO2 reduction. [Dutch] In 2007 heeft het Ministerie van Verkeer en Waterstaat (nu het Ministerie van Infrastructuur en Milieu) het startsein gegeven voor het meerjarenprogramma VoortVarend Besparen (2007 - 2010) met als doel schippers te stimuleren tot energie-efficienter vaargedrag. Het programma dient energie-efficienter vaargedrag te stimuleren resulterend in een brandstofbesparing en een 5% reductie van CO2 emissies in de binnenvaartsector in 2010 ten opzichte van 2007. In de eindmeting is door middel van enquetes onder binnenvaartschippers onderzocht of de binnenvaartsector deze doelstelling heeft gehaald, en in welke mate het VoortVarend Besparen programma heeft bijgedragen aan deze CO2-reductie.

Identification of Dynamically Positioned Ships

Directory of Open Access Journals (Sweden)

Thor I. Fossen

1996-04-01

Full Text Available Todays model-based dynamic positioning (DP systems require that the ship and thruster dynamics are known with some accuracy in order to use linear quadratic optical control theory. However, it is difficult to identify the mathematical model of a dynamically posititmed (DP ship since the ship is not persistently excited under DP. In addition the ship parameter estimation problem is nonlinear and multivariable with only position and thruster state measurements available for parameter estimation. The process and measurement noise must also be modeled in order to avoid parameter drift due to environmental disturbances and sensor failure. This article discusses an off-line parallel extended Kalman filter (EKF algorithm utilizing two measurement series in parallel to estimate the parameters in the DP ship model. Full-scale experiments with a supply vessel are used to demonstrate the convergence and robustness of the proposed parameter estimator.

LNG systems for natural gas propelled ships

Science.gov (United States)

Chorowski, M.; Duda, P.; Polinski, J.; Skrzypacz, J.

2015-12-01

In order to reduce the atmospheric pollution generated by ships, the International Marine Organization has established Emission Controlled Areas. In these areas, nitrogen oxides, sulphur oxides and particulates emission is strongly controlled. From the beginning of 2015, the ECA covers waters 200 nautical miles from the coast of the US and Canada, the US Caribbean Sea area, the Baltic Sea, the North Sea and the English Channel. From the beginning of 2020, strong emission restrictions will also be in force outside the ECA. This requires newly constructed ships to be either equipped with exhaust gas cleaning devices or propelled with emission free fuels. In comparison to low sulphur Marine Diesel and Marine Gas Oil, LNG is a competitive fuel, both from a technical and economical point of view. LNG can be stored in vacuum insulated tanks fulfilling the difficult requirements of marine regulations. LNG must be vaporized and pressurized to the pressure which is compatible with the engine requirements (usually a few bar). The boil-off must be controlled to avoid the occasional gas release to the atmosphere. This paper presents an LNG system designed and commissioned for a Baltic Sea ferry. The specific technical features and exploitation parameters of the system will be presented. The impact of strict marine regulations on the system's thermo-mechanical construction and its performance will be discussed. The review of possible flow-schemes of LNG marine systems will be presented with respect to the system's cost, maintenance, and reliability.

46 CFR 167.05-25 - Nautical school ship.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Nautical school ship. 167.05-25 Section 167.05-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Definitions § 167.05-25 Nautical school ship. The term nautical school ship means a vessel operated by or in connection with a nautical school...

Liner Shipping Fleet Repositioning

DEFF Research Database (Denmark)

Tierney, Kevin; Jensen, Rune Møller

2011-01-01

Liner shipping fleet repositioning consists of moving vessels between services in a liner ship- ping network in order to better orient the overall network to the world economy, and to ensure the proper maintenance of vessels. Thus, fleet repositioning involves sailing and loading activities subject...

Hydrodynamics of Ship Propellers

DEFF Research Database (Denmark)

Breslin, John P.; Andersen, Poul

This book deals with flows over propellers operating behind ships, and the hydrodynamic forces and moments which the propeller generates on the shaft and on the ship hull.The first part of the text is devoted to fundamentals of the flow about hydrofoil sections (with and without cavitation...... of an intermittently cavitating propeller in a wake and the pressures and forces it exerts on the shaft and on the ship hull is examined. A final chapter discusses the optimization of efficiency of compound propulsors. The authors have taken care to clearly describe physical concepts and mathematical steps. Appendices...

International climate policy : consequences for shipping

OpenAIRE

Mæstad, Ottar; Evensen, Annika Jaersen; Mathiesen, Lars; Olsen, Kristian

2000-01-01

This report summarises the main results from the project Norwegian and international climate policy consequences for shipping. The aim of the project has been to shed light on how climate policies might affect shipping, both from the cost side and from the demand side. The project has been divided into three sub-projects, investigating the consequences of climate policies for 1. Optimal shipping operations and management 2. The competitiveness of shipping relative to land transport 3. The tra...

Performance Monitoring of Ships

DEFF Research Database (Denmark)

Hansen, Søren Vinther

is used as input to the system and by comparing model and ship behaviour, an index describing the ship’s performance is generated. The work in this thesis is based on data logged through the automation system on board a PostPanmax container ship where data have been logged through a year. A routine...... in the models have been identified. The models used in this work are based on empirical relations or based on regression analyses of model tests and full-scale trials. In order to achieve valid results the conditions where performance is estimated have to be inside the boundaries of the model. Filters have been......The purpose of the research project is to establish a reliable index in the performance evaluation of ships. During operation the ship will experience added resistance due to fouling of hull and propeller. The added resistance will lead to increased fuel consumption and thus increased emissions...

Computational methods for more fuel-efficient ship

NARCIS (Netherlands)

Koren, B.

2008-01-01

The flow of water around a ship powered by a combustion engine is a key factor in the ship's fuel consumption. The simulation of flow patterns around ship hulls is therefore an important aspect of ship design. While lengthy computations are required for such simulations, research by Jeroen Wackers

48 CFR 1371.118 - Changes-ship repair.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Changes-ship repair. 1371.118 Section 1371.118 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE DEPARTMENT SUPPLEMENTAL REGULATIONS ACQUISITIONS INVOLVING SHIP CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.118 Changes—ship repair. Insert clause...

Some concepts of future nuclear ship

International Nuclear Information System (INIS)

Fujino, Masataka

2000-01-01

Characteristic features of nuclear power generation are as follows: (1) Thermal energy can be continuously extracted for a long time without fuel feed, (2) Nuclear energy is suitable for generating huge power, (3) Oxygen is unnecessary for combustion of fuel, and (4) Unlike fossil fuel, nuclear power generation does not exhaust NOx, SOx, and CO 2 : it can be considered environmentally friendly. In view of these features, the Japan Atomic Energy Research Institute commissioned the Shipbuilding Research Association of Japan (JSRA) to survey what kinds of nuclear ship would be put to practical use in the near future. For this purpose, a research committee was organized in 1992 by the JSRA, and concluded its investigation in 1996. The main aim of this research was to clarify the requirements of ship performance as nuclear ships, and then to extract the technical issues of the marine reactor installed in nuclear ships to be solved. As a result of the survey, it was suggested that displacement-type large high-speed container ship would be one of the promising future nuclear merchant ships, and 6500 m deep-sea and 600 m undersea scientific research submersibles would be other promising nuclear special purpose ships. At the same time, various requirements of marine reactors, which are expected to be installed in these ships, were clarified mainly from the technical viewpoints. (author)

Total Analysis System for Ship Structural Strength

OpenAIRE

Takuya, Yoneya; Hiroyuki, Kobayashi; Abdul M., Rahim; Yoshimichi, Sasaki; Masaki, Irisawa; Technical Investigation and Information Department, Research Center; Technical Investigation and Information Department, Research Center; Singapore Office; Technical Investigation and Information Department, Research Center; Technical Investigation and Information Department, Research Center

2001-01-01

This paper outlines a total analysis system for ship hull structures, which integrates a wide variety of analysis functions to realise practical applications of rational methods for assessing ship structural strength. It is based on direct calculation of wave-induced loads as well as three-dimensional structural analysis of an entire-ship or hold structure. Three major analysis functions of the total system are ship motion and wave load analysis, ship structural analysis and statistical analy...

The Transformation of Swedish Shipping, 1970-2010

OpenAIRE

Sjögren, Hans; Taro Lennerfors, Thomas; Taudal Poulsen, Rene

2012-01-01

Since the early 1970s, as shipping has undergone a period of structural change, Swedish shipping has rapidly declined from a position of global importance. The Swedish-controlled fleet has dwindled, and the structure of the industry itself has changed. This article explores the influence of shipping markets, shipping regulations, company strategies, maritime know-how, and financial resources on the development of Swedish shipping from 1970 to 2010. A comparison is made between, on the one han...

46 CFR 148.04-23 - Unslaked lime in bulk.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Unslaked lime in bulk. 148.04-23 Section 148.04-23... HAZARDOUS MATERIALS IN BULK Special Additional Requirements for Certain Material § 148.04-23 Unslaked lime in bulk. (a) Unslaked lime in bulk must be transported in unmanned, all steel, double-hulled barges...

Effective and Safe Ships

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Amdahl, Jørgen; Rutgersson, Olle

1996-01-01

A Joint Nordic Research project "Effecive and Safe Ships" is presented. The project is aiming to develop methods and tools for quantitative evaluation fo ship safety. This report is the report of the preliminary phase where the plan for the main project is developed. The objectives of the project...

Analysis of ship life cycles: the impact of economic cycles and ship inspection

NARCIS (Netherlands)

Bijwaard, G.E.; Knapp, S.

2009-01-01

Due to the shipping industry's international legal framework, there are loopholes in the system, which can increase the risk of incidents with high economic costs due to the substandard operation of vessels. This article uses duration analysis and through the creation of ship life cycles provides

Simple analytical relations for ship bow waves

Science.gov (United States)

Noblesse, Francis; Delhommeau, G.?Rard; Guilbaud, Michel; Hendrix, Dane; Yang, Chi

Simple analytical relations for the bow wave generated by a ship in steady motion are given. Specifically, simple expressions that define the height of a ship bow wave, the distance between the ship stem and the crest of the bow wave, the rise of water at the stem, and the bow wave profile, explicitly and without calculations, in terms of the ship speed, draught, and waterline entrance angle, are given. Another result is a simple criterion that predicts, also directly and without calculations, when a ship in steady motion cannot generate a steady bow wave. This unsteady-flow criterion predicts that a ship with a sufficiently fine waterline, specifically with waterline entrance angle 2, may generate a steady bow wave at any speed. However, a ship with a fuller waterline (25E) can only generate a steady bow wave if the ship speed is higher than a critical speed, defined in terms of αE by a simple relation. No alternative criterion for predicting when a ship in steady motion does not generate a steady bow wave appears to exist. A simple expression for the height of an unsteady ship bow wave is also given. In spite of their remarkable simplicity, the relations for ship bow waves obtained in the study (using only rudimentary physical and mathematical considerations) are consistent with experimental measurements for a number of hull forms having non-bulbous wedge-shaped bows with small flare angle, and with the authors' measurements and observations for a rectangular flat plate towed at a yaw angle.

Changes in Atmospheric Sulfur Dioxide (SO2) over the English Channel - 1.5 Years of Measurements from the Penlee Point Atmospheric Observatory

Science.gov (United States)

Yang, Mingxi; Bell, Thomas; Hopkins, Frances; Smyth, Timothy

2016-04-01

Atmospheric sulfur dioxide (SO2) was measured continuously from the Penlee Point Atmospheric Observatory near Plymouth, United Kingdom between May 2014 and November 2015. This coastal site is exposed to marine air across a wide wind sector. The predominant southwesterly winds carry relatively clean background Atlantic air. In contrast, air from the southeast is heavily influenced by exhaust plumes from ships in the English Channel as well as near near the Plymouth Sound. International Maritime Organization regulation came into force in January 2015 to reduce sulfur emissions tenfold in Sulfur Emission Control Areas such as the English Channel. We observed a three-fold reduction from 2014 to 2015 in the estimated ship-emitted SO2 during southeasterly winds. Dimethylsulfide (DMS) is an important source of atmospheric SO2 even in this semi-polluted region. The relative contribution of DMS oxidation to the SO2 burden over the English Channel increased from ~1/3 in 2014 to ~1/2 in 2015 due to the reduction in ship sulfur emissions. Our diel analysis suggests that SO2 is removed from the marine atmospheric boundary layer in about half a day, with dry deposition to the ocean accounting for a quarter of the total loss.

46 CFR 173.051 - Public nautical school ships.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Public nautical school ships. 173.051 Section 173.051 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY SPECIAL RULES PERTAINING TO VESSEL USE School Ships § 173.051 Public nautical school ships. Each public nautical school...

Ship emissions and air pollution in Denmark

DEFF Research Database (Denmark)

Olesen, Helge Rørdam; Winther, Morten; Ellermann, Thomas

A project has been carried out to map the contribution from ship traffic to air pollution in Denmark. A main element in the project is the establishment of a new, improved inventory of ship emissions for the waters around Denmark. The inventory makes use of the so-called AIS system, which...... continuously keeps track of ship positions. The inventory provides basis for model calculations of air quality in Denmark for the years 2007, 2011 and 2020. The study has focus on identifying the contribution from ships, and on assessing the effect of international regulations of ship pollution. A minor...... component of the study concerns the contribution to local air pollution from ships at port....

27 CFR 44.187 - Shipping containers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Shipping containers. 44... Shipping containers. Each shipping case, crate, or other container in which tobacco products, or cigarette... same containers in which they were received from the factory. (72 Stat. 1418, as amended; 26 U.S.C...

27 CFR 44.254 - Shipping containers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Shipping containers. 44.254 Section 44.254 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Requirements § 44.254 Shipping containers. Each shipping case, crate, or other container, in which cigars are...

49 CFR 176.24 - Shipping papers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 176.24 Section 176.24... Requirements § 176.24 Shipping papers. (a) A person may not accept a hazardous material for transportation or transport a hazardous material by vessel unless that person has received a shipping paper prepared in...

49 CFR 177.817 - Shipping papers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 177.817 Section 177.817... Information and Regulations § 177.817 Shipping papers. (a) General requirements. A person may not accept a... received a shipping paper prepared in accordance with part 172 of this subchapter or the material is...

49 CFR 174.24 - Shipping papers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 174.24 Section 174.24... Requirements § 174.24 Shipping papers. (a) A person may not accept a hazardous material for transportation or transport a hazardous material by rail unless that person receives a shipping paper prepared in accordance...

Development of nuclear powered ship in Japan

International Nuclear Information System (INIS)

Sato, Hiroshi

1976-01-01

The development of nuclear merchant ship in Japan was started in 1955 by the establishment of Nuclear Ship Study Group, and since then, the investigation, test and research on nuclear ships have been continued. As a result, a nuclear ocean observation and supply ship was designed for trial. Researches were carried out also in JAERI and Institute for Technical Research of Ships. Meanwhile, the nuclear icebreaker Lenin was completed in Soviet Union in 1959, the nuclear ship Savannah set out for maiden voyage in U.S. in 1962, and the construction of the nuclear ore carrier Otto Hahn was prepared in FRG. Japan Nuclear Ship Development Corp. was established in 1963, and started the design and construction of the first nuclear ship in Japan, Mutsu. The basic policy in the construction is the improvement of nuclear ship technology, the securing of safety, and the use of domestic technologies as far as possible. The progress of the design, construction and test of the Mutsu is described. Owing to the problem of radiation leak, the development of nuclear ships stagnated for a while, but the nuclear plant of the Mutsu demonstrated the expected performance in the functional test, land criticality test and zero output test, and it is expected that the bud of the independent development brought up so far can bear valuable fruit. The independent development of marine nuclear reactors should be continued by selecting the way most suitable to Japan. (Kako, I.)

Ship emissions and their externalities for Greece

Science.gov (United States)

Tzannatos, Ernestos

2010-06-01

The existing and emerging international and European policy framework for the reduction of ship exhaust emissions dictates the need to produce reliable national, regional and global inventories in order to monitor emission trends and consequently provide the necessary support for future policy making. Furthermore, the inventories of ship exhaust emissions constitute the basis upon which their external costs are estimated in an attempt to highlight the economic burden they impose upon the society and facilitate the cost-benefit analysis of the proposed emission abatement technologies, operational measures and market-based instruments prior to their implementation. The case of Greece is of particular interest mainly because the dense ship traffic within the Greek seas directly imposes the impact of its exhaust emission pollutants (NO x, SO 2 and PM) upon the highly populated, physically sensitive and culturally precious Greek coastline, as well as upon the land and seas of Greece in general, whereas the contribution of Greece in the global CO 2 inventory at a time of climatic change awareness cannot be ignored. In this context, this paper presents the contribution of Greece in ship exhaust emissions of CO 2, NO x, SO 2 and PM from domestic and international shipping over the last 25 years (1984-2008), utilizing the fuel-based (fuel sales) emission methodology. Furthermore, the ship exhaust emissions generated within the Greek seas and their externalities are estimated for the year 2008, through utilizing the fuel-based (fuel sales) approach for domestic shipping and the activity-based (ship traffic) approach for international shipping. On this basis, it was found that during the 1984 to 2008 period the fuel-based (fuel sales) ship emission inventory for Greece increased at an average annual rate of 2.85%. In 2008, the CO 2, NO x, SO 2 and PM emissions reached 12.9 million tons (of which 12.4 million tons of CO 2) and their externalities were found to be around 3

Report of Nuclear Powered Ship Meeting

International Nuclear Information System (INIS)

1984-01-01

The development of nuclear-powered ships in Japan broke down due to the radiation leak on the nuclear ship ''Mutsu'' in 1974, and the objective has not yet been attained. The Japan Nuclear Ship Research and Development Agency was reorganized to advance the development of nuclear-powered ships and to develop marine nuclear reactors. Recently, various opinions have been expressed regarding the development of nuclear-powered ships and Mutsu, accordingly, it is necessary to clarify the way it should be. The Atomic Energy Commission organized this meeting to discuss the problem. The practical use of nuclear-powered ships is expected at the beginning of the 21st century, but it is only the guess. But it is important to accumulate the technology, knowledge and experience to prepare for the use of nuclear-powered ships. The continuation of the development of Mutsu is important for the future, and the construction of the new home port is unavoidable. The aim of the research and development, and the concrete way of advancing the research and development of Mutsu are discussed. It is scheduled that the Agency is integrated with other atomic energy organizations by March, 1985. The consideration to be given for implementing the integration is described. (Kako, I.)

19 CFR 4.69 - Shipping articles.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Shipping articles. 4.69 Section 4.69 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.69 Shipping articles. No vessel of the U.S... officer, of the shipping articles agreements, including any seaman's allotment agreement, required by 46 U...

29 CFR 1915.162 - Ship's boilers.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Ship's boilers. 1915.162 Section 1915.162 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Ship's Machinery and Piping Systems § 1915.162 Ship's boilers. (a) Before...

Added masses of ship structures

CERN Document Server

Korotkin, Alexandr I

2008-01-01

This essentially self-contained reference book contains data on added masses of ships and various ship and marine engineering structures. Theoretical and experimental methods for determining added masses of these objects are described.

Control mechanisms for Nordic ship emissions

Energy Technology Data Exchange (ETDEWEB)

Martinsen, K. [DNV, Oslo (Norway); Torvanger, A. [Cicero, Oslo (Norway)

2013-04-15

Shipping today operates under a complex set of international and domestic regulations. However, the environmental regulations have lagged behind those of other industries. This situation is now changing quite dramatically. The increased focus on environmental issues, combined with the growing realisation of the actual pollution burden imposed by shipping, has led to an upsurge in both international and national regulations. Some are ready and will enter into force in the near future, while others are still being developed. On behalf of the Nordic Council of Ministers DNV has carried out a study on possible control mechanisms for Nordic ship emission. The aim is to assess the baseline shipping emissions and reduction potential and the possible controlling mechanisms (both incentives and regulations) available for reducing the emissions to air from shipping within the Nordic region. (Author)

Spent fuel shipping cask sealing concepts

International Nuclear Information System (INIS)

Sonnier, C.S.

1989-05-01

In late 1985, the International Atomic Energy Agency (IAEA) requested the US Program for Technical Assistance to IAEA Safeguards (POTAS) to provide a study which examined sealing concepts for application to spent fuel shipping casks. This request was approved, and assigned to Sandia National Laboratories (Sandia). In the course of this study, discussions were held with personnel in the International Safeguards Community who were familiar with the shipping casks used in their States. A number of shipping casks were examined, and discussions were held with two shipping cask manufacturers in the US. As a result of these efforts, it was concluded that the shipping casks provided an extremely good containment, and that many of the existing casks can be effectively sealed by applying the seal to the cask closure bolts/nuts

46 CFR 107.111 - Definitions.

Science.gov (United States)

2010-10-01

... gross tons and non-self-propelled; or (3) More than 65 feet in length and propelled by steam. Muster... unit means a unit with a ship shape or barge type displacement hull of single or multiple hull...) under head of about 35 feet from a distance of about 10 feet, and for a period of 5 minutes, can be...

Development of a nuclear ship safety philosophy

International Nuclear Information System (INIS)

Thompson, T.E.

1978-01-01

A unique safety philosophy must be recognized and accepted as an integral part of the design and operation of a nuclear ship. For the nuclear powered ship, the ultimate safety of the reactor and therefore the crew and the environment lies with the safety of the ship itself. The basis for ship safety is its ability to navigate and survive the conditions or the environment in which it may find itself. The subject of traditional ship safety is examined along with its implication for reactor protection and safety. Concepts of reactor safety are also examined. These two philosophies are combined in a manner so as to provide a sound philosophy for the safety of nuclear ships, their crews, and the environment

15 CFR 750.11 - Shipping tolerances.

Science.gov (United States)

2010-01-01

... in the ECCN applicable to your item reads “ $ value” or “in $ value”, there is no shipping tolerance... is no shipping tolerance with respect to the number of units. However, the value of all of your... shipping tolerance on this license because the items are controlled by an ECCN where “$ value” is the...

Ship design methodologies of preliminary design

CERN Document Server

Papanikolaou, Apostolos

2014-01-01

This book deals with ship design and in particular with methodologies of the preliminary design of ships. The book is complemented by a basic bibliography and five appendices with useful updated charts for the selection of the main dimensions and other basic characteristics of different types of ships (Appendix A), the determination of hull form  from the data of systematic hull form series (Appendix B), the detailed description of the relational method for the preliminary estimation of ship weights (Appendix C), a brief review of the historical evolution of shipbuilding science and technology from the prehistoric era to date (Appendix D) and finally a historical review of regulatory developments of ship's damage stability to date (Appendix E).  The book can be used as textbook for ship design courses or as additional reading for university or college students of naval architecture courses and related disciplines; it may also serve as a reference book for naval architects, practicing engineers of rel...

Potential risks of nuclear ships

International Nuclear Information System (INIS)

Oelgaard, P.L.

1994-07-01

This report represents an attempt to evaluate the potential risks of nuclear ships. Firstly reasons are given why nuclear ship accidents will not lead to accidents of the magnitude of the Chernobyl accident. This is due to much lower content of radioactive material and to different reactor designs. Next a review is given of the types of accidents which have actually occurred. Of these the reactor accidents which may lead to serious consequences for the crew and the environment are considered further. These are reactivity accidents and loss of coolant accidents. In addition the long term risks of sunken nuclear ships and sea disposed reactor compartments etc. are also discussed. Based on available accident data an attempt is made to estimate the probability of serious nuclear ship accidents. (au)

Occupational accidents aboard merchant ships

DEFF Research Database (Denmark)

Hansen, H.L.; Nielsen, D.; Frydenberg, Morten

2002-01-01

Objectives: To investigate the frequency, circumstances, and causes of occupational accidents aboard merchant ships in international trade, and to identify risk factors for the occurrence of occupational accidents as well as dangerous working situations where possible preventive measures may...... be initiated. Methods: The study is a historical follow up on occupational accidents among crew aboard Danish merchant ships in the period 1993–7. Data were extracted from the Danish Maritime Authority and insurance data. Exact data on time at risk were available. Results: A total of 1993 accidents were...... aboard. Relative risks for notified accidents and accidents causing permanent disability of 5% or more were calculated in a multivariate analysis including ship type, occupation, age, time on board, change of ship since last employment period, and nationality. Foreigners had a considerably lower recorded...

Concept Design and Risk Assessment of Nuclear Propulsion Ship

International Nuclear Information System (INIS)

Gil, Youngmi; Yoo, Seongjin; Kim, Yeontae; Oh, June; Byun, Yoonchul; Woo, Ilguk; Kim, Jiho; Choi, Suhn

2014-01-01

The nuclear propulsion ships (hereinafter referred to as 'nuclear ships') have been considered as an eco-friendly ship. There have historically been warship and submarine with the source of nuclear power. The use of nuclear ships has been recently extending to the icebreaker, the deep-water exploration ship, and the floating nuclear power plant. Prior to developing the new ship, we evaluated the economics of various types of ships and concluded that the container ship could be appropriate for the nuclear propulsion. In order to verify its safety, we performed the ship calculation based on the optimal arrangement of the nuclear reactor. Finally, we verified its safety by the HAZID. In the former research, we confirmed the applicability of the nuclear propulsion system for the large container ship. In this study, we verified the safety of the nuclear ships according to the HAZID analysis. We expect that this research will lead to safe design of the nuclear ships

Concept Design and Risk Assessment of Nuclear Propulsion Ship

Energy Technology Data Exchange (ETDEWEB)

Gil, Youngmi; Yoo, Seongjin; Kim, Yeontae; Oh, June; Byun, Yoonchul; Woo, Ilguk [Daewoo Shipbuilding and Marine Engineering Co. Ltd., Seoul (Korea, Republic of); Kim, Jiho; Choi, Suhn [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

The nuclear propulsion ships (hereinafter referred to as 'nuclear ships') have been considered as an eco-friendly ship. There have historically been warship and submarine with the source of nuclear power. The use of nuclear ships has been recently extending to the icebreaker, the deep-water exploration ship, and the floating nuclear power plant. Prior to developing the new ship, we evaluated the economics of various types of ships and concluded that the container ship could be appropriate for the nuclear propulsion. In order to verify its safety, we performed the ship calculation based on the optimal arrangement of the nuclear reactor. Finally, we verified its safety by the HAZID. In the former research, we confirmed the applicability of the nuclear propulsion system for the large container ship. In this study, we verified the safety of the nuclear ships according to the HAZID analysis. We expect that this research will lead to safe design of the nuclear ships.

Automatic temperature control method of shipping can

International Nuclear Information System (INIS)

Nishikawa, Kaoru.

1992-01-01

The present invention provides a method of rapidly and accurately controlling the temperature of a shipping can, which is used upon shipping inspection for a nuclear fuel assembly. That is, a measured temperature value of the shipping can is converted to a gas pressure setting value in a jacket of the shipping can by conducting a predetermined logic calculation by using a fuzzy logic. A gas pressure control section compares the pressure setting value of a fuzzy estimation section and the measured value of the gas pressure in the jacket of the shipping can, and conducts air supply or exhaustion of the jacket gas so as to adjust the measured value with the setting value. These fuzzy estimation section and gas pressure control section control the gas pressure in the jacket of the shipping can to control the water level in the jacket. As a result, the temperature of the shipping can is controlled. With such procedures, since the water level in the jacket can be controlled directly and finely, temperature of the shipping can is automatically controlled rapidly and accurately compared with a conventional case. (I.S.)

Ship Observations - VOS and Navy

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Combination of Voluntary Observing Ship (VOS) and US Navy Ship weather observations. Obs generally taken 2-4 times daily at 00, 06, 12, and 18z.

Shipping Fairways

Data.gov (United States)

Department of Homeland Security — Various shipping zones delineate activities and regulations for marine vessel traffic. Traffic lanes define specific traffic flow, while traffic separation zones...

Navy Ships: Turning Over Auxiliary Ship Operations to the Military Sealift Command Could Save Millions

National Research Council Canada - National Science Library

1997-01-01

.... One additional multiproduct ship of a new class is currently under construction. The Navy has delegated operational control of 27 of these ships to MSC, the military's single manager for sealift, to better...

Update on emissions and environmental impacts from the international fleet of ships: the contribution from major ship types and ports

Directory of Open Access Journals (Sweden)

S. B. Dalsøren

2009-03-01

Full Text Available A reliable and up-to-date ship emission inventory is essential for atmospheric scientists quantifying the impact of shipping and for policy makers implementing regulations and incentives for emission reduction. The emission modelling in this study takes into account ship type and size dependent input data for 15 ship types and 7 size categories. Global port arrival and departure data for more than 32 000 merchant ships are used to establish operational profiles for the ship segments. The modelled total fuel consumption amounts to 217 Mt in 2004 of which 11 Mt is consumed in in-port operations. This is in agreement with international sales statistics. The modelled fuel consumption is applied to develop global emission inventories for CO₂, NO₂, SO₂, CO, CH₄, VOC (Volatile Organic Compounds, N₂O, BC (Black Carbon and OC (Organic Carbon. The global emissions from ships at sea and in ports are distributed geographically, applying extended geographical data sets covering about 2 million global ship observations and global port data for 32 000 ships. In addition to inventories for the world fleet, inventories are produced separately for the three dominating ship types, using ship type specific emission modelling and traffic distributions.

A global Chemical Transport Model (CTM was used to calculate the environmental impacts of the emissions. We find that ship emissions is a dominant contributor over much of the world oceans to surface concentrations of NO₂ and SO₂. The contribution is also large over some coastal zones. For surface ozone the contribution is high over the oceans but clearly also of importance over Western North America (contribution 15–25% and Western Europe (5–15%. The contribution to tropospheric column ozone is up to 5–6%. The overall impact of ship emissions on global methane lifetime is large due to the high NO_x emissions. With

Ships going slow in reducing their NOx emissions: changes in 2005-2012 ship exhaust inferred from satellite measurements over Europe

Science.gov (United States)

Folkert Boersma, K.; Vinken, Geert C. M.; Tournadre, Jean

2015-07-01

We address the lack of temporal information on ship emissions, and report on rapid short-term variations of satellite-derived ship NOx emissions between 2005 and 2012 over European seas. Our inversion is based on OMI observed tropospheric NO2 columns and GEOS-Chem simulations. Average European ship NOx emissions increased by ˜15% from 2005 to 2008. This increase was followed by a reduction of ˜12% in 2009, a direct result of the global economic downturn in 2008-2009, and steady emissions from 2009 to 2012. Observations of ship passages through the Suez Canal and satellite altimeter derived ship densities suggests that ships in the Mediterranean Sea have reduced their speed by more than 30% since 2008. This reduction in ship speed is accompanied by a persistent 45% reduction of average, per ship NOx emission factors. Our results indicate that the practice of ‘slow steaming’, i.e. the lowering of vessel speed to reduce fuel consumption, has indeed been implemented since 2008, and can be detected from space. In spite of the implementation of slow steaming, one in seven of all NOx molecules emitted in Europe in 2012 originated from the shipping sector, up from one in nine in 2005. The growing share of the shipping contributions to the overall European NOx emissions suggests a need for the shipping sector to implement additional measures to reduce pollutant emissions at rates that are achieved by the road transport and energy producing sectors in Europe.

Study of Volatility of New Ship Building Prices in LNG Shipping

Directory of Open Access Journals (Sweden)

T. Bangar Raju

2016-12-01

Full Text Available The natural gas market has been expanding in size and has attracted particular attention across the global energy market. Although most natural gas transportation is carried out through pipelines, almost one third of it is done with the help of merchant vessels, capable of carrying liquefied natural gas. These LNG carriers have a special design and thus can be treated as a separate class of global fleet. New vessels are huge capital investments by vessel owning companies and just like other vessel classes; the new shipbuilding prices for the LNG segment continue to be a key aspect in the decision making of business players. Additionally these prices can be volatile as new ship building prices fluctuate with time. This paper attempts to analyse the volatility of new ship building prices of LNG carriers. For the study, the average ship building prices for all the LNG carriers having volume carrying capacity is between 160,000 – 173,000 cbm to be delivered between 2016 – 2019 were taken into account. For the analysis, GARCH and EGARCH methods were applied on the data set. The analysis concluded that there is a great deal of volatility in the new ship building prices of LNG vessels. It was also identified that negative shocks were more persistent the positive shocks.

Evaluation of the Service Performance of Ships

DEFF Research Database (Denmark)

Andersen, Poul; Borrod, Anne-Sophie; Blanchot, Hervé

2005-01-01

A simple method has been established for the evaluation of the service performance of ships. Input data are easily collected daily on board and transformed to a well-defined condition that makes possible the comparison between ships, for instance, sister ships, and between different time periods...... of voyages for the same ship. The procedure has been applied to two ships that are identical, with the exception that one has a conventional propeller, whereas the other one is fitted with a high-efficiency propeller of the KAPPEL type. The results are obtained from a period of 2 years steaming for both...

Transnucleaire's experience in ship adaptation

International Nuclear Information System (INIS)

Brachet, Y.; Vallette-Fontaine, M.

2000-01-01

Due to the application of the new IMDG regulations for the transport of radioactive material by sea, the conditions of transport of MTR spent fuel have drastically changed five years ago. In this paper, TRANSNUCLEAIRE analyses the necessary modifications to apply to existing ships in order to comply with the IMDG/INF regulations as well as with the Japanese KAISA 520 regulation. In the MTR spent fuel transport market characterized by a competitive approach, TRANSNUCLEAIRE has carried out many transports by sea in full compliance with the regulations at a price which is as close as possible to that of other industrial goods and without the need to fully dedicate the BOUGUENAIS ship to nuclear transports. Innovative ship design solutions have been implemented and accepted by different Authorities uncluding the Advisory Committee of the Japanese MOT. Due to efficient finite element calculations, benchmarked by laboratory large scale tests, high performances crushing materials have been developed in order to absorb the energy of collision between ships. These developments have led ta propose an efficient ship design complying with all the existing worldwide nuclear regulations. (author)

Ship-to-Ship Radiocommunication Trial by Using Wireless LAN

Directory of Open Access Journals (Sweden)

Yasuyuki Niwa

2015-12-01

In a former field radiocommunication trial, omni-directional antennas were used and a few hundred kbps throughput between two ships was measured, which was not enough for our research target (over 1Mbps. In order to get faster throughput, a field radiocommunication trial was carried out again with a few types of directional antennas and RSSI (Received Signal Strength Indication and the throughput between two ships was measured simultaneously. As a result, multi-path (2-path model affected by the reflection of the sea surface was confirmed and also the characteristics of the directional antennas such as half-power angle were confirmed, but the measured throughput was fast enough to meet our expectation.

Blockchain technology and its impact on financial and shipping services

Directory of Open Access Journals (Sweden)

Viktor Diordiiev

2018-03-01

Full Text Available Introduction. Blockchain technology is becoming one of the main drivers of innovation in the global economy. Its adoption will have a huge impact on how businesses and governments operate and on the way people organize their everyday lives. Financial services industry is the one experiencing the biggest impact of the blockchain disruption so far, while financial institutions are among the first adopters of the technology. At the same time, being a relatively traditional industry, shipping has not yet seen many use cases with blockchain, but the technology is able to change this industry dramatically. Aim and tasks. As the industries of finance and shipping have huge potential in the blockchain space and often interact, determining how the blockchain technology adoption can influence the industries of finance and shipping in the future was the main purpose of this article. Research results. To fulfill this purpose, it was important to describe the origins of the blockchain technology, its main characteristics, functioning principles and consensus algorithms. Supported by the recent hype, cryptocurrencies are the biggest use case for blockchain so far, therefore, the article analyzes the largest of them, including Bitcoin, Ethereum and some others, as well as the cryptocurrency market as a whole. The level of worldwide adoption of blockchain and the overall market size are defined further in the article. Various applications in finance are also mentioned, paying particular attention to the insurance industry. Based on this information, the key areas in which blockchain can disrupt finance and insurance are identified. As the number of blockchain companies increases rapidly, the two main fundraising channels for such companies, venture capital and initial coin offering, are analyzed and compared. The ways in which blockchain may impact the shipping services industry are identified further. Conclusion. Afterwards, the article describes a number of

Note from the radioprotection group's shipping service

CERN Multimedia

2006-01-01

The service for the import/export of radioactive materials reminds you that shipping requests for potentially radioactive materials must be made via the EDH request form by ticking the box 'radioactive material'. All the necessary information is given on the web site: http://cern.ch/service-rp-shipping Requests not complying with the above procedure will not be taken into account. Radioactive Shipping Service http://cern.ch/service-rp-shipping Tel. 73171 Fax: 69200

48 CFR 47.305-16 - Shipping characteristics.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Shipping characteristics... CONTRACT MANAGEMENT TRANSPORTATION Transportation in Supply Contracts 47.305-16 Shipping characteristics... shipments of agreed size. (b) Guaranteed shipping characteristics. (1) The contracting officer shall insert...

Ships - inspiring objects in architecture

Science.gov (United States)

Marczak, Elzbieta

2017-10-01

Sea-going vessels have for centuries fascinated people, not only those who happen to work at sea, but first and foremost, those who have never set foot aboard a ship. The environment in which ships operate is reminiscent of freedom and countless adventures, but also of hard and interesting maritime working life. The famous words of Pompey: “Navigare necesseest, vivere non estnecesse” (sailing is necessary, living - is not necessary), which he pronounced on a stormy sea voyage, arouse curiosity and excitement, inviting one to test the truth of this saying personally. It is often the case, however, that sea-faring remains within the realm of dreams, while the fascination with ships demonstrates itself through a transposition of naval features onto land constructions. In such cases, ship-inspired motifs bring alive dreams and yearnings as well as reflect tastes. Tourism is one of the indicators of people’s standard of living and a measure of a society’s civilisation. Maritime tourism has been developing rapidly in recent decades. A sea cruise offers an insight into life at sea. Still, most people derive their knowledge of passenger vessels and their furnishings from the mass media. Passenger vessels, also known as “floating cities,” are described as majestic and grand, while their on-board facilities as luxurious, comfortable, exclusive and inaccessible to common people on land. Freight vessels, on the other hand, are described as enormous objects which dwarf the human being into insignificance. This article presents the results of research intended to answer the following questions: what makes ships a source of inspiration for land architecture? To what extent and by what means do architects draw on ships in their design work? In what places can we find structures inspired by ships? What ships inspire architects? This article presents examples of buildings, whose design was inspired by the architecture and structural details of sea vessels. An analysis of

India's ship recycling trade-off

NARCIS (Netherlands)

Worrell, E.; Athanasopoulou, V.

2014-01-01

The special nature of India's steel industry lends particular importance to ship recycling as a source of scrap. Ship recycling in upgraded 'green' facilities can substitute other 'dirty' ironmaking processes, resulting in energy savings and air pollutant emission reductions for the Indian steel

SHIPPING REQUESTS ON EDH

CERN Multimedia

Logistics Group

2001-01-01

Users are informed that as from 1 September 2001 all Shipping Requests must be made on EDH using the appropriate electronic form. The submission of user requests directly into EDH will help rationalise the activities of the Shipping Service (Import & Export), with requests being automatically forwarded to hierarchical supervisors thereby improving the processing speed and facilitating the follow-up. Thank you for your collaboration.

A building cost estimation method for inland ships

NARCIS (Netherlands)

Hekkenberg, R.G.

2014-01-01

There is very little publicly available data about the building cost of inland ships, especially for ships that have dimensions that differ significantly from those of common ships. Also, no methods to determine the building cost of inland ships are described in literature. In this paper, a method

Test Ship

Data.gov (United States)

Federal Laboratory Consortium — The U. S. Navy dedicated the decommissioned Spruance Class destroyer ex-PAUL F. FOSTER (EDD 964), Test Ship, primarily for at sea demonstration of short range weapon...

Risks to Navigation at the Matagorda Ship Channel Entrance, Texas, Phase 2: Evaluation of Significant Risk Factors

Science.gov (United States)

2011-08-01

jetties are deteriorating. As a result of this deterioration and lowered beach and dunes adjacent to the jetties, there are overwash occurrences during...the toe . An example slope stability analysis is presented in Figure 51. This figure shows a typical cross section or model properties (soil layers...depth caused by the ship passage. Any area of influence will be localized and, in light of a critical gradient analysis, near- toe scouring effects

The complex network of global cargo ship movements.

Science.gov (United States)

Kaluza, Pablo; Kölzsch, Andrea; Gastner, Michael T; Blasius, Bernd

2010-07-06

Transportation networks play a crucial role in human mobility, the exchange of goods and the spread of invasive species. With 90 per cent of world trade carried by sea, the global network of merchant ships provides one of the most important modes of transportation. Here, we use information about the itineraries of 16 363 cargo ships during the year 2007 to construct a network of links between ports. We show that the network has several features that set it apart from other transportation networks. In particular, most ships can be classified into three categories: bulk dry carriers, container ships and oil tankers. These three categories do not only differ in the ships' physical characteristics, but also in their mobility patterns and networks. Container ships follow regularly repeating paths whereas bulk dry carriers and oil tankers move less predictably between ports. The network of all ship movements possesses a heavy-tailed distribution for the connectivity of ports and for the loads transported on the links with systematic differences between ship types. The data analysed in this paper improve current assumptions based on gravity models of ship movements, an important step towards understanding patterns of global trade and bioinvasion.

Bio-indications of sunken ships and ship wrecks

Digital Repository Service at National Institute of Oceanography (India)

Parulekar, A

An evaluation of bottom fauna of ship-wreck sites in estuarine and coastal waters of Goa, India, revealed an exceptionally high biotic enrichment. In terms of number of species, faunal dispersion, faunal diversity, biomass and productivity, in space...

Ships and the Sailors Inside Them

National Research Council Canada - National Science Library

Sims, Philip

2004-01-01

.... Iron shipbuilding allowed safer and healthier ships but their internal compartmentation created communication problems which were gradually solved with mechanical systems Ships developed their own...

Prototypic fabrication of TRIGA irradiated fuel shipping casks

International Nuclear Information System (INIS)

Kim, B.K.; Lee, Y.W.; Whang, C.K.; Lee, J.B.

1980-01-01

This is the safety analysis report on the prototypic fabrication of ''TRIGA Irradiated Fuel Shipping Cask'' conducted by KAERI in 1980. The results of the evaluation show that the shipping cask is in compliance with the applicable regulation for the normal conditions of transport as well as hypothetical accident conditions. The prototypic fabrication of the shipping cask (type B) was carried out for the first time in Korea after getting technical experience from fabrication of the ''TRIGA Spent Fuel Shipping Cask'' and ''the KO-RI Unit 1 surveillance capsule shipping cask'' in 1979. This report contains structural evaluation, thermal evaluation, shielding, criticality, quality assurance, and handling procedures of the shipping cask

Challenges to Ship Hydrodynamics in the XXI Century

Directory of Open Access Journals (Sweden)

Lech Kobylinski

2014-09-01

Full Text Available The beginning of twenty-first century is characterized with important changes in world shipping and exploitation of ocean resources. Three important trends are clearly visible: environment protection, safety and economy. They materialize in important changes in the structure of world fleet where some existing ship types are going to disappear and new ship types emerge. Increasing the size of some ship types is another visible tendency. Stress on environment protection has serious impact on the hydrodynamic characteristics of ships whether with regard to safety zero accident rate is the goal. Important challenges to ship hydrodynamics caused by those tendencies are discussed in the paper.

Ship operations report, 1975

International Nuclear Information System (INIS)

1976-01-01

The NOAA Ship Operations Report 1975 was developed to provide a summary of projects undertaken during calendar year 1975. The report was prepared from season, cruise and special reports submitted by ships of the fleet. This report is promulgated for inhouse dissemination in the National Oceanic and Atmospheric Administration, for collaborating and interested agencies, and for use by members of the scientific community. Throughout the year, ships routinely collected and transmitted weather data. Similarly, as NOAA participants in the Integrated Global Ocean Station System (IGOSS) service program, XBT observations were taken and either radioed or submitted in log form via mail. In addition, particulate and radionuclide samples were taken in cooperation with the Atomic Energy Commission, sediment samples were obtained for the Smithsonian Institution and observations were made of marine mammals

Single liner shipping service design

DEFF Research Database (Denmark)

Plum, Christian Edinger Munk; Pisinger, David; Salazar-González, Juan-José

2014-01-01

The design of container shipping networks is an important logistics problem, involving assets and operational costs measured in billions of dollars. To guide the optimal deployment of the ships, a single vessel round trip is considered by minimizing operational costs and flowing the best paying...

Auxiliary facilities on nuclear ship 'MUTSU'

International Nuclear Information System (INIS)

Tsujimura, Shotaro; Takigami, Yoshio.

1989-01-01

The nuclear ship 'MUTSU' has been moored at SEKINEHAMA, MUTU City in AOMORI Prefecture and several tests and works are being carried out on the ship. The construction of the auxiliary facilities for these works on the ship was completed in safety in August 1988. After that the facilities have fulfilled their function. The outlines of design, fabrication and construction of the facilities are described in this paper. (author)

Production Balance of Ship Erection

Institute of Scientific and Technical Information of China (English)

JIANG Ru-hong; TAN Jia-hua; LIU Cun-gen

2008-01-01

A network plan model of ship erection was established based on the network planning technologyand the work-package breakdown system. The load-oriented production control method was introduced to buildup a throughput diagram model thus it is possible to describe the ship erection process numerically. Based onthe digitaiized models some cases of production balance of ship erection were studied and three balance indexeswere put forward, they are the load balance rate, the input manpower balance rate and the maximum gantrycrane operating times. Such an analytic method based on the balance evaluation is the important foundationfor digitization and intelligentization of shipyard production management.

MASTER OF THE SHIP, MANAGER AND INSTRUCTOR

Directory of Open Access Journals (Sweden)

Florin IORDANOAIA

2010-01-01

Full Text Available The master of the ship is the person on the board who has the qualification and the necessary certificate of competency for running a maritime transport ship. He is the one who takes the ship into administration from the ship-owner, he is the only leader, the legal and direct chief of the entire crew, being invested with authority upon all the members of the crew. The master fulfils the attributes and displays his activity according to the legal laws of his flag, of the marine regulations and of the international conventions. In all the relationships which he establishes with physical or juridical people, the master represents the ship-owner, in a double condition, as an officer and as a commercial manager. In this paper, it is analysed the situation of the ship masters, the relationships which these masters have with the crew and the problems which appear during their voyage. At the end of the paper there are proposed measures to increase the quality of the training of the ship masters, to solve the situations connected with the members of the crew.

Ship dynamics for maritime ISAR imaging.

Energy Technology Data Exchange (ETDEWEB)

Doerry, Armin Walter

2008-02-01

Demand is increasing for imaging ships at sea. Conventional SAR fails because the ships are usually in motion, both with a forward velocity, and other linear and angular motions that accompany sea travel. Because the target itself is moving, this becomes an Inverse- SAR, or ISAR problem. Developing useful ISAR techniques and algorithms is considerably aided by first understanding the nature and characteristics of ship motion. Consequently, a brief study of some principles of naval architecture sheds useful light on this problem. We attempt to do so here. Ship motions are analyzed for their impact on range-Doppler imaging using Inverse Synthetic Aperture Radar (ISAR). A framework for analysis is developed, and limitations of simple ISAR systems are discussed.

Communication from the Radioactive Shipping Service

CERN Multimedia

DDGS Unit

2011-01-01

The radioactive materials Import/Export service reminds you that all movements of potentially radioactive material must be declared in advance. For exports, shipping requests must be made via the EDH request form, ticking the box “radioactive material”. For imports, an electronic form must be completed before the arrival of the material. Requests which do not comply with the above procedure and any unauthorized imports of radioactive material will be refused.The same applies to imports/exports of radioactive sources. All necessary information is given in the web site: http://cern.ch/service-rp-shipping Yann Donjoux / Radioactive Shipping Service Phone: +41 22 767.31.71 Fax: +41 22 766.92.00 Email: service-rp-shipping@cern.ch

Nuclear powered freight ships - safe and reliable

International Nuclear Information System (INIS)

Schafstall, H.C.

1978-12-01

The five nuclear-powered ships built in the world so far have entered over 100 ports in 14 countries about 1000 times in 15 years, during which there were no accidents endangering the safety of a ship. However, for the expansion of freight shipping with nuclear power, comprehensive international regulations for safety requirements, responsibility etc., are necessary. Although the NEA/IAEO symposium excluded economic questions on the safety of nuclear powered ships, the trends regarding further development in individual countries became clear

Structural health monitoring for ship structures

Energy Technology Data Exchange (ETDEWEB)

Farrar, Charles [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Angel, Marian [Los Alamos National Laboratory; Bement, Matthew [Los Alamos National Laboratory; Salvino, Liming [NSWC, CADEROCK

2009-01-01

Currently the Office of Naval Research is supporting the development of structural health monitoring (SHM) technology for U.S. Navy ship structures. This application is particularly challenging because of the physical size of these structures, the widely varying and often extreme operational and environmental conditions associated with these ships missions, lack of data from known damage conditions, limited sensing that was not designed specifically for SHM, and the management of the vast amounts of data that can be collected during a mission. This paper will first define a statistical pattern recognition paradigm for SHM by describing the four steps of (1) Operational Evaluation, (2) Data Acquisition, (3) Feature Extraction, and (4) Statistical Classification of Features as they apply to ship structures. Note that inherent in the last three steps of this process are additional tasks of data cleansing, compression, normalization and fusion. The presentation will discuss ship structure SHM challenges in the context of applying various SHM approaches to sea trials data measured on an aluminum multi-hull high-speed ship, the HSV-2 Swift. To conclude, the paper will discuss several outstanding issues that need to be addressed before SHM can make the transition from a research topic to actual field applications on ship structures and suggest approaches for addressing these issues.

Report of Nuclear Powered Ship Council

International Nuclear Information System (INIS)

1982-01-01

From the forecast of energy balance in the world to 21st century, the diversification of energy supply and the technical development enabling it are necessary in Japan. The stable supply of marine fuel is important to maintain and develop the national life. At present, as the marine fuel substituting for petroleum, atomic energy is at the position nearest to practical use. In advanced countries, the basic technology required for the practical use of nuclear-powered merchant ships seems to have been established, but Japan is about 10 years behind them due to the delay of the Mutsu project. In order to maintain and improve the technical level of shipbuilders, the independent technology related to nuclear-powered ships must be established in Japan. In the economical examination of nuclear-powered ships, ice breakers and ice breaking tankers are advantageous, but in other types of ships, a number of conditions must be satisfied to be economical. The Mutsu must be operated to collect the data and experience, and the project of an improved marine prototype reactor must be decided. Also a demonstration ship must be built. The standards for the design, construction and operation of nuclear-powered ships and the public acceptance are necessary. (Kako, I.)

Ship exhaust gas plume cooling

NARCIS (Netherlands)

Schleijpen, H.M.A.; Neele, P.P.

2004-01-01

The exhaust gas plume is an important and sometimes dominating contributor to the infrared signature of ships. Suppression of the infrared ship signatures has been studied by TNO for the Royal Netherlands Navy over considerable time. This study deals with the suppression effects, which can be

Note from the radioprotection group's shipping service

CERN Multimedia

2006-01-01

Le service SHIPPING du groupe de radioprotection souhaite vous rappeler qu'avant toute expédition de matériel susceptible d'être radioactif, une demande de transport doit être établie par EDH en cochant la case appropriée (danger radioactif). Merci de bien vouloir prendre note des informations figurant dans le site Web: http://cern.ch/service-rp-shipping Toute demande non conforme ne sera pas prise en compte. Radioactive Shipping Service http://cern.ch/service-rp-shippingTél: 73171Fax: 69200

Accuracy of visual wave observation from merchant ships and estimated wave loads; Accuracy of visual wave observation from merchant ships and estimated wave loads

Energy Technology Data Exchange (ETDEWEB)

Kawabe, H. [National Defense Academy, Kanagawa (Japan); Masaoka, K. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

1998-06-01

There is a large number of studies on discussions concerning accuracy of visual observation of waves and the correction method thereon. This paper give considerations on observation accuracy placing a viewpoint on that by merchant ships. Based on ship meteorological observation tables reported to the Meteorological Agency of Japan on meteorology in North Pacific during 14 years from 1976 to1989, wave observation values taken by merchant ships and observation ships were compared statistically to investigate the accuracy of visual wave observations carried out by merchant ships. With regard to wave heights, the observation values taken by the observation ships and the merchant ships have strong correlation, where the merchant ships evaluate them somewhat higher than the observation ships. Regarding wave cycles of wind waves, the merchant ships tend to have the observation values on longer cycle side. Correlation between the observations values by the merchant ships and the observation ships is weak both in wind waves and swells. There is not much of variation in accuracy of observations during daytime and at night performed by the merchant ships. It will be necessary in the future to give considerations on a method to correct the observation values on wave cycles taken by the merchant ship, and on a correction method in which both of the wave cycles and the wave heights are corrected simultaneously to make the observation values of the merchant ship equal to those of the observation ships. Thus, the observation values reported by general merchant ships in a large number every year will have to be utilized more effectively. 11 refs., 21 figs., 2 tabs.

Ships going slow in reducing their NOx emissions: changes in 2005–2012 ship exhaust inferred from satellite measurements over Europe

International Nuclear Information System (INIS)

Boersma, K Folkert; Vinken, Geert C M; Tournadre, Jean

2015-01-01

We address the lack of temporal information on ship emissions, and report on rapid short-term variations of satellite-derived ship NO x emissions between 2005 and 2012 over European seas. Our inversion is based on OMI observed tropospheric NO 2 columns and GEOS-Chem simulations. Average European ship NO x emissions increased by ∼15% from 2005 to 2008. This increase was followed by a reduction of ∼12% in 2009, a direct result of the global economic downturn in 2008–2009, and steady emissions from 2009 to 2012. Observations of ship passages through the Suez Canal and satellite altimeter derived ship densities suggests that ships in the Mediterranean Sea have reduced their speed by more than 30% since 2008. This reduction in ship speed is accompanied by a persistent 45% reduction of average, per ship NO x emission factors. Our results indicate that the practice of ‘slow steaming’, i.e. the lowering of vessel speed to reduce fuel consumption, has indeed been implemented since 2008, and can be detected from space. In spite of the implementation of slow steaming, one in seven of all NO x molecules emitted in Europe in 2012 originated from the shipping sector, up from one in nine in 2005. The growing share of the shipping contributions to the overall European NO x emissions suggests a need for the shipping sector to implement additional measures to reduce pollutant emissions at rates that are achieved by the road transport and energy producing sectors in Europe. (letter)

Nuclear powered ships. Findings from a feasibility study

International Nuclear Information System (INIS)

Namikawa, Shunichiro; Maerli, Morten Bremer; Hoffmann, Peter Nyegaard; Brodin, Erik

2011-01-01

Nuclear shipping is attractive for several reasons, one of which is its positive effect on emissions (CO 2 , NOx and SOx). The benefits, however, do not come without risks of possible harmful effects on humans and wildlife. Nuclear ships set themselves apart from conventional ships, as well as from on-shore nuclear power-plants, on several counts. 1) The reactor-unit are non-stationary, and the reactor is subject to the ship motions. 2) Ship reactors must be compact due to space constraints. 3) Special design considerations are required to ensure reactor safety and security, as well as to enable refuelling. 4) A naval nuclear fuel cycle infrastructure for fuel fabrication, handling, and disposal is needed. Technological feasibility of nuclear shipping is by itself inconclusive to a expansion into civilian applications and use. Civilian nuclear propulsion needs to be commercially viable and politically acceptable. Appropriate legislation must be in place, and nuclear shipping concepts with proven safety records and highest possible nuclear proliferation-resistance must be established. Possible 'showstoppers' to a viable nuclear civilian shipping industry are outlined in the paper in view of Political, Technical, Regulatory, Commercial, Safety and Security aspects. Further, different types of ships with different propulsion system are compared in lights of life cycle cost and air emission. (author)

Sulina and Danube-Black Sea Channels: Competitors or Allies on Cargo Transport in South-Eastern Europe?

Directory of Open Access Journals (Sweden)

Ionica Soare

2015-10-01

Full Text Available The two river channels which connect the Black Sea to the inland Romanian area, have constituted since the beginning of their building two very important transport routes for the cargo and passenger traffic (Sulina that have connected Black Sea to the internal ports of Romania, thus representing ”transport highways” of the Romanian economy. The present study tries to present the chronological evolution of these two shipping routes, regarding their importance to the cargo traffic, as well as the financial policy imposed by the administration of these channels. We will present and analyze retrospectively the major elements regarding the administration of these channels, a comparative analysis of the role of these two channels in the river cargo transport, consequently trying to predict a future evolution of these two river communication routes.

Wallops Ship Surveillance System

Science.gov (United States)

Smith, Donna C.

2011-01-01

Approved as a Wallops control center backup system, the Wallops Ship Surveillance Software is a day-of-launch risk analysis tool for spaceport activities. The system calculates impact probabilities and displays ship locations relative to boundary lines. It enables rapid analysis of possible flight paths to preclude the need to cancel launches and allow execution of launches in a timely manner. Its design is based on low-cost, large-customer- base elements including personal computers, the Windows operating system, C/C++ object-oriented software, and network interfaces. In conformance with the NASA software safety standard, the system is designed to ensure that it does not falsely report a safe-for-launch condition. To improve the current ship surveillance method, the system is designed to prevent delay of launch under a safe-for-launch condition. A single workstation is designated the controller of the official ship information and the official risk analysis. Copies of this information are shared with other networked workstations. The program design is divided into five subsystems areas: 1. Communication Link -- threads that control the networking of workstations; 2. Contact List -- a thread that controls a list of protected item (ocean vessel) information; 3. Hazard List -- threads that control a list of hazardous item (debris) information and associated risk calculation information; 4. Display -- threads that control operator inputs and screen display outputs; and 5. Archive -- a thread that controls archive file read and write access. Currently, most of the hazard list thread and parts of other threads are being reused as part of a new ship surveillance system, under the SureTrak project.

29 CFR 1915.164 - Ship's propulsion machinery.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Ship's propulsion machinery. 1915.164 Section 1915.164 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Ship's Machinery and Piping Systems § 1915.164 Ship's...

47 CFR 80.59 - Compulsory ship inspections.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Compulsory ship inspections. 80.59 Section 80... STATIONS IN THE MARITIME SERVICES Applications and Licenses § 80.59 Compulsory ship inspections. (a) Inspection of ships subject to the Communications Act or the Safety Convention. (1) The FCC will not normally...

Internationalisation Within Liner Shipping

DEFF Research Database (Denmark)

Prockl, Günter; Kinra, Aseem; Kotzab, Herbert

2018-01-01

, the degree of internationalisation, measured on the basis of sea-oriented operations, differs from that measured according to land-oriented front-end marketing and sales activities. The purpose of this study is to further examine the internationalisation patterns of shipping lines. An examination...... of the front-end activities and the structures of leading container-shipping companies is conducted. The sales office networks of the sector’s 20 largest companies worldwide (by twenty-foot equivalent unit capacity) are analysed as key indicators. The numbers of sales offices are measured by analysing...... the websites of the sample (20 companies), as well as annual reports and other publicly available data sources. The findings show that not all shipping companies are international, by virtue of the industry. While it is difficult to observe differences in the overall patterns of the sales networks at a macro...

MASTER OF THE SHIP, MANAGER AND INSTRUCTOR

OpenAIRE

Florin IORDANOAIA

2010-01-01

The master of the ship is the person on the board who has the qualification and the necessary certificate of competency for running a maritime transport ship. He is the one who takes the ship into administration from the ship-owner, he is the only leader, the legal and direct chief of the entire crew, being invested with authority upon all the members of the crew. The master fulfils the attributes and displays his activity according to the legal laws of his flag, of the marine regulations and...

Plastic Pollution from Ships

OpenAIRE

Čulin, Jelena; Bielić, Toni

2016-01-01

The environmental impact of shipping on marine environment includes discharge of garbage. Plastic litter is of particular concern due to abundance, resistance to degradation and detrimental effect on marine biota. According to recently published studies, a further research is required to assess human health risk. Monitoring data indicate that despite banning plastic disposal at sea, shipping is still a source of plastic pollution. Some of the measures to combat the problem are discussed.

Allocation of ESS by interval optimization method considering impact of ship swinging on hybrid PV/diesel ship power system

International Nuclear Information System (INIS)

Wen, Shuli; Lan, Hai; Hong, Ying-Yi; Yu, David C.; Zhang, Lijun; Cheng, Peng

2016-01-01

Highlights: • An uncertainty model of PV generation on board is developed based on the experiments. • The moving and swinging of the ship are considered in the optimal ESS sizing problem. • Optimal sizing of ESS in a hybrid PV/diesel/ESS ship power system is gained by the interval optimization method. • Different cases were studied to show the significance of the proposed method considering the swinging effects on the cost. - Abstract: Owing to low efficiency of traditional ships and the serious environmental pollution that they cause, the use of solar energy and an energy storage system (ESS) in a ship’s power system is increasingly attracting attention. However, the swinging of a ship raises crucial challenges in designing an optimal system for a large oil tanker ship, which are associated with uncertainties in solar energy. In this study, a series of experiments are performed to investigate the characteristics of a photovoltaic (PV) system on a moving ship. Based on the experimental results, an interval uncertainty model of on-board PV generation is established, which considers the effect of the swinging of the ship. Due to the power balance equations, the outputs of the diesel generator and the ESS on a large oil tanker are also modeled using interval variables. An interval optimization method is developed to determine the optimal size of the ESS in this hybrid ship power system to reduce the fuel cost, capital cost of the ESS, and emissions of greenhouse gases. Variations of the ship load are analyzed using a new method, taking five operating conditions into account. Several cases are compared in detail to demonstrate the effectiveness of the proposed algorithm.

Arctic shipping emissions inventories and future scenarios

Directory of Open Access Journals (Sweden)

J. J. Corbett

2010-10-01

Full Text Available This paper presents 5 km×5 km Arctic emissions inventories of important greenhouse gases, black carbon and other pollutants under existing and future (2050 scenarios that account for growth of shipping in the region, potential diversion traffic through emerging routes, and possible emissions control measures. These high-resolution, geospatial emissions inventories for shipping can be used to evaluate Arctic climate sensitivity to black carbon (a short-lived climate forcing pollutant especially effective in accelerating the melting of ice and snow, aerosols, and gaseous emissions including carbon dioxide. We quantify ship emissions scenarios which are expected to increase as declining sea ice coverage due to climate change allows for increased shipping activity in the Arctic. A first-order calculation of global warming potential due to 2030 emissions in the high-growth scenario suggests that short-lived forcing of ~4.5 gigagrams of black carbon from Arctic shipping may increase global warming potential due to Arctic ships' CO₂ emissions (~42 000 gigagrams by some 17% to 78%. The paper also presents maximum feasible reduction scenarios for black carbon in particular. These emissions reduction scenarios will enable scientists and policymakers to evaluate the efficacy and benefits of technological controls for black carbon, and other pollutants from ships.

Improving the competitiveness of green ship recycling

NARCIS (Netherlands)

Jain, K.P.

2017-01-01

The end of life of a ship is determined by its owner on the basis of various commercial and technical factors. Once decided to scrap a ship, almost all end-of-life (EOL) ships are sold to recycling yards for dismantling; except for a few which are converted into museums, hotels, storage, and

Achieving Energy Efficient Ship Operations Under Third Party Management

DEFF Research Database (Denmark)

Taudal Poulsen, René; Sornn-Friese, Henrik

2015-01-01

Profitable energy saving measures are often not fully implemented in shipping, causing energy efficiency gaps. The paper identifies energy efficiency gaps in ship operations, and explores their causes. Lack of information on energy efficiency, lack of energy training at sea and onshore and lack...... of time to produce and provide reliable energy efficiency information cause energy efficiency gaps. The paper brings together the energy efficiency and ship management literatures, demonstrating how ship management models influence energy efficiency in ship operations. Achieving energy efficiency in ship...

Analysis of Ship Groundings on Soft Sea Beds

DEFF Research Database (Denmark)

Simonsen, Bo Cerup; Pedersen, Preben Terndrup

1997-01-01

it influences the ship heave and pitch motions as well as the friction between the ship and the soil.In this paper a rational calculation model is presented for the sea bed soil reaction forces on the ship bottom. The model is based on the assumption that the penetration of the ship bow generates a flow of pore......The consequences associated with ships running aground depend very much on the soil characteristics of the sea bed and the geometrical shape of the ship bow. The penetration into the sea bed depends on these factors and the penetration is an important factor for the ship motion because...... by the theory of frictional soils in rupture. Frictional stresses on the bow surface are assumed to be related to the normal pressure by a simple Coulumb relation. The total soil reaction as a function of velocity and penetration is found by integration of normal pressure and frictional stresses over...

Optimization of ship inner shell to improve the safety of seagoing transport ship

Directory of Open Access Journals (Sweden)

Yan-Yun YU

2013-09-01

Full Text Available A practical Ship Inner Shell Optimization Method (SISOM, the purpose of which is to improve the safety of the seagoing transport ship by decreasing the maximum Still Water Bending Moment (SWBM of the hull girder under all typical loading conditions, is presented in this paper. The objective of SISOM is to make the maximum SWBM minimum, and the section areas of the inner shell are taken as optimization variables. The main requirements of the ship performances, such as cargo hold capacity, propeller and rudder immersion, bridge visibility, damage stability and prevention of pollution etc., are taken as constraints. The penalty function method is used in SISOM to change the above nonlinear constraint problem into an unconstrained one, which is then solved by applying the steepest descent method. After optimization, the optimal section area distribution of the inner shell is obtained, and the shape of inner shell is adjusted according to the optimal section area. SISOM is applied to a product oil tanker and a bulk carrier, and the maximum SWBM of the two ships is significantly decreased by changing the shape of inner shell plate slightly. The two examples prove that SISOM is highly efficient and valuable to engineering practice.

On the collision protection of ships

International Nuclear Information System (INIS)

Jones, N.

1976-01-01

A brief survey of the literature extant on the collision protection of ships is presented herein. An examination of the characteristics of different energy-absorbing methods suggests that honeycomb structures provide an alternative to deck structures which are currently used to achieve the collision protection of ships. Various features of honeycomb panels are explored and a particular structural arrangement which utilizes both sides of a hull and incorporates honeycomb panels is proposed for the collision protection of a ship. (Auth.)

Observations and computations of narrow Kelvin ship wakes

OpenAIRE

Francis Noblesse; Chenliang Zhang; Jiayi He; Yi Zhu; Chenjun Yang; Wei Li

2016-01-01

Computations of far-field ship waves, based on linear potential flow theory and the Hogner approximation, are reported for monohull ships and catamarans. Specifically, far-field ship waves are computed for six monohull ships at four Froude numbers F≡V/gL=0.58, 0.68, 0.86, 1.58 and for six catamarans with nondimensional hull spacing s≡S/L=0.25 at two Froude numbers Fs≡V/gS=1 and 2.5. Here, g is the gravitational acceleration, V and L denote the ship speed and length, and S is the separation di...

Ship Domain Model for Multi-ship Collision Avoidance Decision-making with COLREGs Based on Artificial Potential Field

Directory of Open Access Journals (Sweden)

TengFei Wang

2017-03-01

Full Text Available A multi-ship collision avoidance decision-making and path planning formulation is studied in a distributed way. This paper proposes a complete set of solutions for multi-ship collision avoidance in intelligent navigation, by using a top-to-bottom organization to structure the system. The system is designed with two layers: the collision avoidance decision-making and the path planning. Under the general requirements of the International Regulations for Preventing Collisions at Sea (COLREGs, the performance of distributed path planning decision-making for anti-collision is analyzed for both give-way and stand-on ships situations, including the emergency actions taken by the stand-on ship in case of the give-way ship’s fault of collision avoidance measures. The Artificial Potential Field method(APF is used for the path planning in details. The developed APF method combined with the model of ship domain takes the target ships’ speed and course in-to account, so that it can judge the moving characteristics of obstacles more accurately. Simulation results indicate that the system proposed can work effectiveness.

Nuclear ship accidents, description and analysis

International Nuclear Information System (INIS)

Oelgaard, P.L.

1993-03-01

In this report available information on 44 reported nuclear ship events is considered. Of these 6 deals with U.S. ships and 38 with USSR ships. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/ explosions, sea-water leaks into the submarines and sinking of vessels are considered. Comments are made on each of the events, and at the end of the report an attempt is made to point out the weaknesses of the submarine designs which have resulted in the accidents. It is emphasized that some of the information of which this report is based, may be of dubious nature. Consequently some of the results of the assessments made may not be correct. (au)

Ship operations report, 1973

International Nuclear Information System (INIS)

1973-01-01

The NOAA Fleet Operations Report 1973 was developed to provide a summary of project accomplishments during calendar year 1973. The report was prepared from season, cruise and special reports submitted by ships of the fleet. Centralized management of the NOAA Fleet was finalized by changing the operational control of the National Marine Fisheries Service (NMFS) Ships DAVID STARR JORDAN (FRS 44), TOWNSEND CROMWELL (FRS 43) and MURRE II (FRV 63) from NMFS to the National Ocean Survey on July 1, 1973. Throughout the year, ships routinely collected and transmitted weather data. Similarly, as NOAA participants in the Integrated Global Ocean Station System (IGOSS) service program, XBT observations were taken and either radioed or submitted in log form via mail. In addition, particulate and radionuclide samples were taken in cooperation with the Atomic Energy Commission, sediment samples were obtained for the Smithsonian Institution and observations were made of marine mammals

Fire safety of LPG in marine transportation. Final report

Energy Technology Data Exchange (ETDEWEB)

Martinsen, W.E.; Johnson, D.W.; Welker, J.R.

1980-06-01

This report contains an analytical examination of cargo spill and fire hazard potential associated with the marine handling of liquefied petroleum gas (LPG) as cargo. Principal emphasis was on cargo transfer operations for ships unloading at receiving terminals, and barges loading or unloading at a terminal. Major safety systems, including emergency shutdown systems, hazard detection systems, and fire extinguishment and control systems were included in the analysis. Spill probabilities were obtained from fault tree analyses utilizing composite LPG tank ship and barge designs. Failure rates for hardware in the analyses were generally taken from historical data on similar generic classes of hardware, there being very little historical data on the specific items involved. Potential consequences of cargo spills of various sizes are discussed and compared to actual LPG vapor cloud incidents. The usefulness of hazard mitigation systems (particularly dry chemical fire extinguishers and water spray systems) in controlling the hazards posed by LPG spills and spill fires is also discussed. The analysis estimates the probability of fatality for a terminal operator is about 10/sup -6/ to 10/sup -5/ per cargo transfer operation. The probability of fatality for the general public is substantially less.

Feasibility Study on Nuclear Propulsion Ship according to Economic Evaluation

Energy Technology Data Exchange (ETDEWEB)

Gil, Youngmi; Yoo, Seongjin; Oh, June; Byun, Yoonchul; Woo, Ilguk [Daewoo Shipbuilding and Marine Engineering Co., Ltd, Seoul (Korea, Republic of); Kim, Jiho; Choi, Suhn [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-05-15

The use of nuclear ships has been extending to the icebreaker, the deep-water exploration ship, and the floating nuclear power plant. Prior to developing the new ship, the relevant regulations need to be considered. In this study, we reviewed the nuclear ship-related regulations. In addition, economic value is one of the most important factors which should be considered in the pre-design phase. To evaluate the economics of the nuclear ship, we calculated Capital Expenditure (abbreviated as CAPEX) and Operation Expenditure (abbreviated as OPEX) for various types of ships. We reviewed the nuclear ship-related regulations and evaluated the economics of the nuclear ship compared to the diesel ship. The calculation result shows that economic feasibility of the nuclear ship depends on the oil price as well as the cost of the nuclear reactor.

Designing Indonesian Liner Shipping Network

Directory of Open Access Journals (Sweden)

Armand Omar Moeis

2017-06-01

Full Text Available As the largest archipelago nation in the world, Indonesia’s logistics system has not shown excellence according to the parameters of logistics performance index and based on logistics costs percentages from overall GDP. This is due to the imbalances of trading on the western and eastern regions in Indonesia, which impacts the transportation systems costs to and from the eastern regions. Therefore, it is imperative to improve the competitiveness of Indonesian maritime logistics through maritime logistics network design. This research will focus on three levels of decision making in logistics network design, which include type of ships in the strategic level, shipping routes in the tactical level, and container allocation in the operational level with implementing butterfly routes in Indonesia’s logistics networking problems. Furthermore, this research will analyze the impact of Pendulum Nusantara and Sea Toll routes against the company profits and percentages of containers shipped. This research will also foresee how demand uncertainties and multi-period planning should affect decision making in designing the Indonesian Liner Shipping Network.

The Liner Shipping Fleet Repositioning Problem with Cargo Flows

DEFF Research Database (Denmark)

Tierney, Kevin; Jensen, Rune Møller

2012-01-01

We solve an important problem for the liner shipping industry called the Liner Shipping Fleet Repositioning Problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between services in a liner shipping network. Shippers wish...

Facts about Noroviruses on Cruise Ships

Science.gov (United States)

... Cruise Tips for Healthy Cruising Related Resources Cruise Ship Inspection Scores & Information Inspection Scores Cruise Line Directory Green ... 800-CDC-INFO ( 1-800-232-4636 ). Cruise Ship Inspection Scores & Information Inspection Scores Cruise Line Directory Green ...

A massive ingression of the alien species Mytilus edulis L. (Bivalvia: Mollusca into the Mediterranean Sea following the Costa Concordia cruise-ship disaster

Directory of Open Access Journals (Sweden)

E. CASOLI

2016-03-01

Full Text Available The Costa Concordia cruise-ship disaster occurred just off the coast of Italy on January 13th, 2012, and entailed the largest marine salvage operation in history. The salvage employed vessels from different European harbours, providing an unexpected means for transporting alien species into the Mediterranean. In this work we identified mussel species using fragments length polymorphism of a nuclear locus and report the first evidence of the transport of the blue mussel, Mytilus edulis Linnaeus, 1758 (Bivalvia: Mollusca, into the Mediterranean Sea, as a part of the fouling community of the hull of an accommodation barge arrived from a NE Atlantic location in October 2012. Furthermore, we describe the rapid growth of this species, under the ASV Pioneer, until its almost total extinction during the summer of 2013, which left a covering of mussel shells on the underlying Posidonia oceanica (Linnaeus Delile, 1813. meadow. This high mortality rate indicated that M. edulis had been exposed to high stress conditions, probably due to different salinity, temperature, and oligotrophic conditions from its place of origin, and there was no spawning event or known settlement on the nearest infralittoral natural habitats. This event reminds us of how the Mediterranean Sea is constantly under alien-species pressure, due to human activities.

Black carbon from ships: a review of the effects of ship speed, fuel quality and exhaust gas scrubbing

Science.gov (United States)

Lack, D. A.; Corbett, J. J.

2012-05-01

The International Maritime Organization (IMO) has moved to address the health and climate impact of the emissions from the combustion of low-quality residual fuels within the commercial shipping industry. Fuel sulfur content (FS) limits and an efficiency design index for future ships are examples of such IMO actions. The impacts of black carbon (BC) emissions from shipping are now under review by the IMO, with a particular focus on the potential impacts of future Arctic shipping. Recognizing that associating impacts with BC emissions requires both ambient and onboard observations, we provide recommendations for the measurement of BC. We also evaluate current insights regarding the effect of ship speed (engine load), fuel quality and exhaust gas scrubbing on BC emissions from ships. Observations demonstrate that BC emission factors (EFBC) increases 3 to 6 times at very low engine loads (engine load, even with reduced load fuel savings. If fleets were required to operate at lower maximum engine loads, presumably associated with reduced speeds, then engines could be re-tuned, which would reduce BC emissions. Ships operating in the Arctic are likely running at highly variable engine loads (25-100%) depending on ice conditions and ice breaking requirements. The ships operating at low load may be emitting up to 50% more BC than they would at their rated load. Such variable load conditions make it difficult to assess the likely emissions rate of BC. Current fuel sulfur regulations have the effect of reducing EFBC by an average of 30% and potentially up to 80% regardless of engine load; a removal rate similar to that of scrubbers. Uncertainties among current observations demonstrate there is a need for more information on a) the impact of fuel quality on EFBC using robust measurement methods and b) the efficacy of scrubbers for the removal of particulate matter by size and composition.

Automatic production planning for the construction of complex ships

NARCIS (Netherlands)

Rose, C.D.

2017-01-01

European shipyards specialize in building complex ship types including offshore vessels, yachts, dredgers, and cruise ships. One key difference between these ships and the simple cargo ships typically built in the Far East is the amount and variety of mission-related equipment required to operate

Liner Shipping Fleet Deployment with Sustainable Collaborative Transportation

Directory of Open Access Journals (Sweden)

Gang Du

2016-02-01

Full Text Available Facing sharp competition in the market for shipping companies, it is necessary to make reasonable and efficient decisions to optimize the container shipping line network so as to improve the shipping efficiency and reduce the transportation cost, as well as to realize the transportation sustainability. Therefore, the liner ship fleet deployment problem with collaborative transportation is proposed in this paper. This problem is formulated as a mixed-integer linear programming model that takes collaborative transportation into consideration. The model includes fixed cost, variable cost, berth cost, transport cost, penalty, compensation cost, and so on. To achieve the sustainable development of collaborative transportation, the shipping companies could make a selection between the internal routes and the external routes to serve each task by comparing the distance between the above routes. A real Asia-Europe-Oceania numerical experiment shows that the proposed sustainable collaborative transportation model can be efficiently solved by C++ calling ILOG CPLEX. Results demonstrate that the optimized shipping line network with sustainable collaborative transportation can improve the service efficiency, as well as the service level of shipping companies.

Leadership Profiling of Ocean Going Ship Masters1

Directory of Open Access Journals (Sweden)

Ioannis Theotokas

2014-12-01

This paper focuses on the ocean going ship Masters and aims at identifying their leadership profiles and understanding their attitudes and reactions in given circumstances. It analyses and discusses the results of a field study of ship officers of different nationalities employed as Masters on board ships of a leading international maritime group. Results of the research reveal that the characteristics and the competencies of ship Masters as identified using the specially developed questionnaire, are compatible with those proposed by situational leadership theories. Ship Masters seem to give priority to the people on board and their needs and try to be supportive in their decisions.

Distributed propulsion for ships

OpenAIRE

Nylund, Vilde

2017-01-01

It is anticipated that using distributed electric propulsion (DEP) on conventional ships will increase the total propulsive efficiency. This is mainly due to two reasons; firstly, because the total propeller disk area can be increased. Secondly, because each propeller can be optimised for the local wake where it is operating. In this work, the benefits of using DEP has been investigated for a 14 000 TEU container ship. Based on a literary study of the present state of propeller modelling ...

INFLUENCE OF OPERABILITY CRITERIA LIMITING VALUES ON SHIP SPEED

Directory of Open Access Journals (Sweden)

Jasna Prpić-Oršić

2016-09-01

Full Text Available When the ship is caught in heavy seas, there are two manoeuvres that the shipmaster can undertake to avoid excessive ship motion and hull damage: changing course or voluntary speed reduction. This paper presents a study of the effect of the various voluntary speed reduction criteria to attainable speed of ship on seaway. The speed loss is calculated by taking into account wind and wave effect on ship speed, the engine and propeller performance in actual seas as well as the mass inertia of the ship. The attainable ship speed for ship in head, following and beam waves by accounting for voluntary speed reduction is estimated for various significant wave height. The criteria of slamming, deck wetness, propeller emergence, excessive accelerations and roll are taken into account. The impact of variations of the limiting values of certain criteria due to which the captain intentionally reduces the ship speed is analysed and discussed.

Report of nuclear powered ship meeting

International Nuclear Information System (INIS)

Anon.

1983-01-01

The research and development of nuclear powered ships in Japan have been advanced centering around the Japan Nuclear Ship Development Agency established in 1963. It is regretful that the development of ''Mutsu'' is largely behind the schedule due to the radiation leak in 1974, and the expected objective has not yet been attained even today. The government decided to advance the research on the improvement of marine nuclear reactors in 1980, and this new research function was given to the Agency by changing its organization. However, recently various arguments have arisen concerning the way of the research and development of nuclear ships in Japan centering around ''Mutsu'', such as the necessity of developing nuclear ships, the enormous expenditure for the development, the aging of ''Mutsu'' more than 10 years after the construction, the introduction of nuclear ship technology from foreign countries and so on. By the end of fiscal 1984, the Agency is expected to merge with other organization related to atomic energy, therefore, it is necessary to decide the way of research and development. This meeting organized by the Atomic Energy Commission makes this report to show the way of thinking about the above arguments. (Kako, I.)

Development of software for handling ship's pharmacy.

Science.gov (United States)

Nittari, Giulio; Peretti, Alessandro; Sibilio, Fabio; Ioannidis, Nicholas; Amenta, Francesco

2016-01-01

Ships are required to carry a given amount of medicinal products and medications depending on the flag and the type of vessel. These medicines are stored in the so called ship's "medicine chest" or more properly - a ship pharmacy. Owing to the progress of medical sciences and to the increase in the mean age of seafarers employed on board ships, the number of pharmaceutical products and medical devices required by regulations to be carried on board ships is increasing. This may make handling of the ship's medicine chest a problem primarily on large ships sailing on intercontinental routes due to the difficulty in identifying the correspondence between medicines obtained abroad with those available at the national market. To minimise these problems a tool named Pharmacy Ship (acronym: PARSI) has been developed. The application PARSI is based on a database containing the information about medicines and medical devices required by different countries regulations. In the first application the system was standardised to comply with the Italian regulations issued on the 1st October, 2015 which entered into force on the 18 January 2016. Thanks to PARSI it was possible to standardize the inventory procedures, facilitate the work of maritime health authorities and make it easier for the crew, not professional in the field, to handle the 'medicine chest' correctly by automating the procedures for medicines management. As far as we know there are no other similar tools available at the moment. The application of the software, as well as the automation of different activities, currently carried out manually, will help manage (qualitatively and quantitatively) the ship's pharmacy. The system developed in this study has proved to be an effective tool which serves to guarantee the compliance of the ship pharmacy with regulations of the flag state in terms of medicinal products and medications. Sharing the system with the Telemedical Maritime Assistance Service may result in

A Ship Cargo Hold Inspection Approach Using Laser Vision Systems

OpenAIRE

SHEN Yang; ZHAO Ning; LIU Haiwei; MI Chao

2013-01-01

Our paper represents a vision system based on the laser measurement system (LMS) for bulk ship inspection. The LMS scanner with 2-axis servo system is installed on the ship loader to build the shape of the ship. Then, a group of real-time image processing algorithms are implemented to compute the shape of the cargo hold, the inclination angle of the ship and the relative position between the ship loader and the cargo hold. Based on those computed inspection data of the ship, the ship loader c...

Ultimate Strength of Ship Hulls under Torsion

DEFF Research Database (Denmark)

Paik, Jeom Kee; Thayamballi, Anil K.; Pedersen, Preben Terndrup

2001-01-01

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characte......For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength...... characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections...... subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical...

46 CFR 71.75-5 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 71.75-5 Section 71.75-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS INSPECTION AND... Passenger Ship Safety Certificate. (a) All vessels on an international voyage are required to have a...

Civil Engineering for the SHiP facility

CERN Document Server

Osborne, John Andrew

2015-01-01

The enlarged scope of the recently proposed experiment to search for Heavy Neutral Leptons, SPSC-EOI-010, is a general purpose fixed target facility which in the initial phase is aimed at a general Search for Hidden Particles (SHiP) as well as tau neutrino physics. This report represents an annex to the SHiP Technical Proposal summarizing the civil engineering considerations for SHiP.

Intermodal transportation of spent fuel

International Nuclear Information System (INIS)

Elder, H.K.

1983-09-01

Concepts for transportation of spent fuel in rail casks from nuclear power plant sites with no rail service are under consideration by the US Department of Energy in the Commercial Spent Fuel Management program at the Pacific Northwest Laboratory. This report identifies and evaluates three alternative systems for intermodal transfer of spent fuel: heavy-haul truck to rail, barge to rail, and barge to heavy-haul truck. This report concludes that, with some modifications and provisions for new equipment, existing rail and marine systems can provide a transportation base for the intermodal transfer of spent fuel to federal interim storage facilities. Some needed land transportation support and loading and unloading equipment does not currently exist. There are insufficient shipping casks available at this time, but the industrial capability to meet projected needs appears adequate

Solvency and Liquidity in Shipping Companies

Directory of Open Access Journals (Sweden)

Heejung Yeo

2016-12-01

Full Text Available This study examines factors affecting the solvency of shipping firms. The paper uses a panel dataset and employs the GLM and FGLS regression analyses. This study explores the financial structure of top 130 shipping firms provided by the Factiva database during the period between 2009 and 2013. The paper finds that liquidity is closely related to the leverage of shipping companies. The negative association between the asset liquidity and the leverage level implies that there exist conflicts of interest between managers and investors. Shipping firms have a comfortable high liquidity position, but they have a high degree of leverage. They need to take steps to reduce debts. There is evidence of heterogeneity in the determinants of leverage level. The paper also finds that the variables such as profitability, FSIZE, FAGE influence differently the leverage level whether the debt is short-term or long-term.

46 CFR Sec. 5 - Measures to protect ship's payrolls.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Measures to protect ship's payrolls. Sec. 5 Section 5... SHIP'S PERSONNEL Sec. 5 Measures to protect ship's payrolls. (a) General Agents are not required to consider the amount of the payroll delivered to the Master at the conclusion of a voyage in determining the...

Model for Estimation of Fuel Consumption of Cruise Ships

Directory of Open Access Journals (Sweden)

Morten Simonsen

2018-04-01

Full Text Available This article presents a model to estimate the energy use and fuel consumption of cruise ships that sail Norwegian waters. Automatic identification system (AIS data and technical information about cruise ships provided input to the model, including service speed, total power, and number of engines. The model was tested against real-world data obtained from a small cruise vessel and both a medium and large cruise ship. It is sensitive to speed and the corresponding engine load profile of the ship. A crucial determinate for total fuel consumption is also associated with hotel functions, which can make a large contribution to the overall energy use of cruise ships. Real-world data fits the model best when ship speed is 70–75% of service speed. With decreased or increased speed, the model tends to diverge from real-world observations. The model gives a proxy for calculation of fuel consumption associated with cruise ships that sail to Norwegian waters and can be used to estimate greenhouse gas emissions and to evaluate energy reduction strategies for cruise ships.

An approach to high speed ship ride quality simulation

Science.gov (United States)

Malone, W. L.; Vickery, J. M.

1975-01-01

The high speeds attained by certain advanced surface ships result in a spectrum of motion which is higher in frequency than that of conventional ships. This fact along with the inclusion of advanced ride control features in the design of these ships resulted in an increased awareness of the need for ride criteria. Such criteria can be developed using data from actual ship operations in varied sea states or from clinical laboratory experiments. A third approach is to simulate ship conditions using measured or calculated ship motion data. Recent simulations have used data derived from a math model of Surface Effect Ship (SES) motion. The model in turn is based on equations of motion which have been refined with data from scale models and SES of up to 101 600-kg (100-ton) displacement. Employment of broad band motion emphasizes the use of the simulators as a design tool to evaluate a given ship configuration in several operational situations and also serves to provide data as to the overall effect of a given motion on crew performance and physiological status.

Game Strategies of Ship in the Collision Situations

Directory of Open Access Journals (Sweden)

Jozef Lisowski

2014-03-01

Full Text Available The paper introduced the basic model of process of safe ship control in a collision situation using a game model with j objects, which includes non-linear state equations and non-linear, time varying constraints of the state variables as well as the quality game control index in the forms of the game integral payment and the final payment. Approximated model of the process control as the model of multi-step matrix game in the form of dual linear programming problem has been adopted here. The Game Ship Control GSC computer program has been designed in the Matlab/Simulink software in order to determine the own ship's safe trajectory. These considerations have been illustrated with examples of a computer simulation using an GSC program for determining the safe ship's trajectory in real navigational situation. Simulation research were passed for five sets of strategies of the own ship and met ships.

Some considerations on the safety of nuclear ships

International Nuclear Information System (INIS)

Kuramoto, Masaaki

1978-01-01

For realizing the practical utilization of nuclear merchant ships, it is essential to gain their acceptance by maritime countries on an equal footing with conventional vessels, and to have the administrative procedures for their admission simplified. This, however cannot be expected to be attained overnight, and progressive measures will have to be adopted, to approach the ultimate goal step by step. The first step should be to demonstrate the safety of nuclear propulsion, for which nuclear ships must accumulate their mileages of safe service. The second important step is to simplify the procedures demanded of nuclear ships for access to ports, through the establishment of international safety standards and design criteria, the enforcement of safety measures covering the entrance of nuclear ships into ports, and the assurance of safety in he repair, inspection and refuelling operations of these ships. Among these measures, the considerations relevant to port entry are the subject of vital interest to both ship operators and port authorities

Accidents on ships in the Danish International Ship register

DEFF Research Database (Denmark)

Ádám, Balázs; Rasmussen, Hanna Barbara

to report accidents causing at least one day off work beyond the day of accident but the first source contains several accidents not fulfilling this criterion, too. Radio Medical is an independent service where all Danish ships may seek medical advice. The data sets were merged by identification number...... of our study is to describe trend of accidents and their contributing factors, with special focus on nationality, occurring in ships under Danish flag in the period 2010-2012. The study used two independent data sources, the Danish Maritime Authority and the Danish Radio Medical. It is mandatory...... to create a single database that has been studied by descriptive statistics and regression analysis. Findings show a stabilised number of accidents in the analysed period. The occurrence of accidents is influenced by nationality. There is a higher frequency of reported injuries found among Danish and other...

46 CFR 169.817 - Master to instruct ship's company.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Master to instruct ship's company. 169.817 Section 169.817 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Operations § 169.817 Master to instruct ship's company. The master shall conduct drills and give instructions as necessary to insure that al...

32 CFR 700.872 - Ships and craft in drydock.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Ships and craft in drydock. 700.872 Section 700... Special Circumstances/ships in Naval Stations and Shipyards § 700.872 Ships and craft in drydock. (a) The... ship or craft, not in commission, is in a naval drydock, the provisions of this article shall apply...

Infrared ship signature analysis and optimisation

NARCIS (Netherlands)

Neele, F.P.

2005-01-01

The last decade has seen an increase in the awareness of the infrared signature of naval ships. New ship designs show that infrared signature reduction measures are being incorporated, such as exhaust gas cooling systems, relocation of the exhausts and surface cooling systems. Hull and

Merchant shipping (Safety Convention) Act 1977

International Nuclear Information System (INIS)

1977-01-01

When this Act comes into force, it will enable the United Kingdom to ratify and to give effect to the 1974 International Convention for the Safety of Life at Sea (the SOLAS Convention) which replaces the SOLAS Convention of 1960. Under the Act, the Secretary of State may make such rules as he considers appropriate regarding ships provided with nuclear power plants in accordance with Chapter VIII of the Annex to the 1974 Convention and to Recommendations attached to it, dealing with nuclear ships, and insofar as those provisions have not been implemented by the Merchant Shipping Acts 1894 to 1974. (NEA) [fr

Advective and diapycnal diffusive oceanic flux in Tenerife - La Gomera Channel

Science.gov (United States)

Marrero-Díaz, A.; Rodriguez-Santana, A.; Hernández-Arencibia, M.; Machín, F.; García-Weil, L.

2012-04-01

During the year 2008, using the commercial passenger ship Volcán de Tauce of the Naviera Armas company several months, it was possible to obtain vertical profiles of temperature from expandable bathythermograph probes in eight stations across the Tenerife - La Gomera channel. With these data of temperature we have been estimated vertical sections of potential density and geostrophic transport with high spatial and temporal resolution (5 nm between stations, and one- two months between cruises). The seasonal variability obtained for the geostrophic transport in this channel shows important differences with others Canary Islands channels. From potential density and geostrophic velocity data we estimated the vertical diffusion coefficients and diapycnal diffusive fluxes, using a parameterization that depends of Richardson gradient number. In the center of the channel and close to La Gomera Island, we found higher values for these diffusive fluxes. Convergence and divergence of these fluxes requires further study so that we can draw conclusions about its impact on the distribution of nutrients in the study area and its impact in marine ecosystems. This work is being used in research projects TRAMIC and PROMECA.

Shipping emissions in ports

OpenAIRE

Merk, Olaf

2014-01-01

Shipping emissions in ports are substantial, accounting for 18 million tonnes of CO2 emissions, 0.4 million tonnes of NOx, 0.2 million of SOx and 0.03 million tonnes of PM10 in 2011. Around 85% of emissions come from containerships and tankers. Containerships have short port stays, but high emissions during these stays. Most of CO2 emissions in ports from shipping are in Asia and Europe (58%), but this share is low compared to their share of port calls (70%). European ports have much less emi...

46 CFR 115.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

...) The route specified on the Certificate of Inspection and the SOLAS Passenger Ship Safety Certificate... 46 Shipping 4 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 115.910 Section 115... MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND...

Ships going slow in reducing their NOx emissions

NARCIS (Netherlands)

Boersma, K.F.; Vinken, G.C.M.; Tournadre, J.

2015-01-01

Weaddress the lack of temporal information on ship emissions, and report on rapid short-term variations of satellite-derived shipNOx emissions between 2005 and 2012 over European seas. Our inversion is based onOMI observed troposphericNO2 columns and GEOS-Chem simulations. Average European shipNOx

S-CNN-BASED SHIP DETECTION FROM HIGH-RESOLUTION REMOTE SENSING IMAGES

Directory of Open Access Journals (Sweden)

R. Zhang

2016-06-01

Full Text Available Reliable ship detection plays an important role in both military and civil fields. However, it makes the task difficult with high-resolution remote sensing images with complex background and various types of ships with different poses, shapes and scales. Related works mostly used gray and shape features to detect ships, which obtain results with poor robustness and efficiency. To detect ships more automatically and robustly, we propose a novel ship detection method based on the convolutional neural networks (CNNs, called SCNN, fed with specifically designed proposals extracted from the ship model combined with an improved saliency detection method. Firstly we creatively propose two ship models, the “V” ship head model and the “||” ship body one, to localize the ship proposals from the line segments extracted from a test image. Next, for offshore ships with relatively small sizes, which cannot be efficiently picked out by the ship models due to the lack of reliable line segments, we propose an improved saliency detection method to find these proposals. Therefore, these two kinds of ship proposals are fed to the trained CNN for robust and efficient detection. Experimental results on a large amount of representative remote sensing images with different kinds of ships with varied poses, shapes and scales demonstrate the efficiency and robustness of our proposed S-CNN-Based ship detector.

Ship-Track Models Based on Poisson-Distributed Port-Departure Times

National Research Council Canada - National Science Library

Heitmeyer, Richard

2006-01-01

... of those ships, and their nominal speeds. The probability law assumes that the ship departure times are Poisson-distributed with a time-varying departure rate and that the ship speeds and ship routes are statistically independent...

46 CFR 176.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 176.910 Section 176... 100 GROSS TONS) INSPECTION AND CERTIFICATION International Convention for Safety of Life at Sea, 1974, as Amended (SOLAS) § 176.910 Passenger Ship Safety Certificate. (a) A vessel, which carries more than...

Near Real Time Ship Detection Experiments

Science.gov (United States)

Brusch, S.; Lehner, S.; Schwarz, E.; Fritz, T.

2010-04-01

A new Near Real Time (NRT) ship detection processor SAINT (SAR AIS Integrated Toolbox) was developed in the framework of the ESA project MARISS. Data are received at DLRs ground segment DLR-BN (Neustrelitz, Germany). Results of the ship detection are available on ftp server within 30 min after the acquisition started. The detectability of ships on Synthetic Aperture Radar (SAR) ERS-2, ENVISAT ASAR and TerraSAR-X (TS-X) images is validated by coastal (live) AIS and space AIS. The monitoring areas chosen for surveillance are the North-, Baltic Sea, and Cape Town. The detectability in respect to environmental parameters like wind field, sea state, currents and changing coastlines due to tidal effects is investigated. In the South Atlantic a tracking experiment of the German research vessel Polarstern has been performed. Issues of piracy in particular in respect to ships hijacked at the Somali coast are discussed. Some examples using high resolution images from TerraSAR-X are given.

Observations and computations of narrow Kelvin ship wakes

Directory of Open Access Journals (Sweden)

Francis Noblesse

2016-01-01

Full Text Available Computations of far-field ship waves, based on linear potential flow theory and the Hogner approximation, are reported for monohull ships and catamarans. Specifically, far-field ship waves are computed for six monohull ships at four Froude numbers F≡V/gL=0.58, 0.68, 0.86, 1.58 and for six catamarans with nondimensional hull spacing s≡S/L=0.25 at two Froude numbers Fs≡V/gS=1 and 2.5. Here, g is the gravitational acceleration, V and L denote the ship speed and length, and S is the separation distance between the twin hulls of a catamaran. The computations show that, although the amplitudes of the waves created by a ship are strongly influenced by the shape of the ship hull, as well known, the ray angles where the largest waves are found are only weakly influenced by the hull shape and indeed are mostly a kinematic feature of the flow around a ship hull. An important practical consequence of this flow feature is that the apparent wake angle of general monohull ships or catamarans (with arbitrarily-shaped hulls can be estimated, without computations, by means of simple analytical relations; these relations, obtained elsewhere via parametric computations, are given here. Moreover, the influence of the two parameters Fs and s that largely determine the ray angles of the dominant waves created by a catamaran is illustrated via computations for three catamarans with hull spacings s=0.2, 0.35, 0.5 at four Froude numbers Fs=1, 1.5, 2, 2.5. These computations confirm that the largest waves created by wide and/or fast catamarans are found at ray angles that only depend on Fs (i.e. that do not depend on the hull spacing s in agreement with an elementary analysis of lateral interference between the dominant waves created by the bows (or sterns of the twin hulls of a catamaran. The dominant-waves ray angles predicted by the theory of wave-interference effects for monohull ships and catamarans are also compared with the observations of narrow Kelvin ship

The activity-based methodology to assess ship emissions - A review

International Nuclear Information System (INIS)

Nunes, R.A.O.; Alvim-Ferraz, M.C.M.; Martins, F.G.; Sousa, S.I.V.

2017-01-01

Several studies tried to estimate atmospheric emissions with origin in the maritime sector, concluding that it contributed to the global anthropogenic emissions through the emission of pollutants that have a strong impact on hu' health and also on climate change. Thus, this paper aimed to review published studies since 2010 that used activity-based methodology to estimate ship emissions, to provide a summary of the available input data. After exclusions, 26 articles were analysed and the main information were scanned and registered, namely technical information about ships, ships activity and movement information, engines, fuels, load and emission factors. The larger part of studies calculating in-port ship emissions concluded that the majority was emitted during hotelling and most of the authors allocating emissions by ship type concluded that containerships were the main pollutant emitters. To obtain technical information about ships the combined use of data from Lloyd's Register of Shipping database with other sources such as port authority's databases, engine manufactures and ship-owners seemed the best approach. The use of AIS data has been growing in recent years and seems to be the best method to report activities and movements of ships. To predict ship powers the Hollenbach (1998) method which estimates propelling power as a function of instantaneous speed based on total resistance and use of load balancing schemes for multi-engine installations seemed to be the best practices for more accurate ship emission estimations. For emission factors improvement, new on-board measurement campaigns or studies should be undertaken. Regardless of the effort that has been performed in the last years to obtain more accurate shipping emission inventories, more precise input data (technical information about ships, engines, load and emission factors) should be obtained to improve the methodology to develop global and universally accepted emission inventories

Crushing of ship bows in head-on collision

DEFF Research Database (Denmark)

Ocakli, H.; Zhang, S.; Pedersen, Preben Terndrup

2004-01-01

Semi-analytical methods for analysis of plate crushing and ship bow damage in head-on collisions are developed in this paper. Existing experimental and theoretical studies for crushing analysis of plated structures are summarized and compared. Simple formulae for determining the crushing force....... The approach developed can be used easily to determine the crushing resistance and damage extent of the ship bow when ship length and collision speed are known. The method can be used in probabilistic analysis of damage extents in ship collisions where a large number of calculations are generally required....

Ship Design and Construction. An Integrated University Course

DEFF Research Database (Denmark)

Andersen, Poul; Jensen, Jørgen Juncher

1996-01-01

This paper describes an integrated course in design and construction of merchant ships taught at the Department of Naval Architecture andOffshore Engineering, the Technical University of Denmark. During the course, the students make a preliminary design of a ship of selected type and also design...... its engine room. The teaching combines lectures with laboratory work at the drawing tables and computer terminals. During the summer holiday, sea time on board ships of the relevant types are offered. Experienced naval architects from shipyards and ship consultancies give lectures and instructions...

Logistical Analysis of the Littoral Combat Ship

National Research Council Canada - National Science Library

Rudko, David

2003-01-01

The purpose of the Littoral Combat Ship (LCS) is to provide the Navy with an affordable, small, multi-mission ship capable of independent, interdependent, and integrated operations inside the littorals...

TMI-2 spent fuel shipping

International Nuclear Information System (INIS)

Quinn, G.J.; Burton, H.M.

1985-01-01

TMI-2 failed fuel will be shipped to the Idaho National Engineering Laboratory for use in the DOE Core Examination Program. The fuel debris will be loaded into three types of canisters during defueling and dry loaded into a spent fuel shipping cask. The cask design accommodates seven canisters per cask and has two separate containment vessels with ''leaktight'' seals. Shipments are expectd to begin in early 1986

Towards a different view on ship design : The development of ships observed through a social?technological perspective

NARCIS (Netherlands)

Van Bruinessen, T.M.; Smulders, F.E.H.M.; Hopman, J.J.

2013-01-01

The research this paper reports on aims to develop a design and engineering strategy for complex ships in between incremental and radical innovation. The majority of European ship-design industry concentrates on the development of complex, one-off ‘specials’ for the offshore industry, like dredgers,

New Zealand code for nuclear powered shipping

International Nuclear Information System (INIS)

1976-06-01

This report recommends guidelines for the safety precautions and procedures to be implemented when New Zealand ports and approaches are used by nuclear powered merchant ships and nuclear powered naval ships

Diatom community structure on in-service cruise ship hulls.

Science.gov (United States)

Hunsucker, Kelli Zargiel; Koka, Abhishek; Lund, Geir; Swain, Geoffrey

2014-10-01

Diatoms are an important component of marine biofilms found on ship hulls. However, there are only a few published studies that describe the presence and abundance of diatoms on ships, and none that relate to modern ship hull coatings. This study investigated the diatom community structure on two in-service cruise ships with the same cruise cycles, one coated with an antifouling (AF) system (copper self-polishing copolymer) and the other coated with a silicone fouling-release (FR) system. Biofilm samples were collected during dry docking from representative areas of the ship and these provided information on the horizontal and vertical zonation of the hull, and intact and damaged coating and niche areas. Diatoms from the genera Achnanthes, Amphora and Navicula were the most common, regardless of horizontal ship zonation and coating type. Other genera were abundant, but their presence was more dependent on the ship zonation and coating type. Samples collected from damaged areas of the hull coating had a similar community composition to undamaged areas, but with higher diatom abundance. Diatom fouling on the niche areas differed from that of the surrounding ship hull and paralleled previous studies that investigated differences in diatom community structure on static and dynamically exposed coatings; niche areas were similar to static immersion and the hull to dynamic immersion. Additionally, diatom richness was greater on the ship with the FR coating, including the identification of several new genera to the biofouling literature, viz. Lampriscus and Thalassiophysa. These results are the first to describe diatom community composition on in-service ship hulls coated with a FR system. This class of coatings appears to have a larger diatom community compared to copper-based AF systems, with new diatom genera that have the ability to stick to ship hulls and withstand hydrodynamic forces, thus creating the potential for new problematic species in the biofilm.

Quantitative analysis method for ship construction quality

Directory of Open Access Journals (Sweden)

FU Senzong

2017-03-01

Full Text Available The excellent performance of a ship is assured by the accurate evaluation of its construction quality. For a long time, research into the construction quality of ships has mainly focused on qualitative analysis due to a shortage of process data, which results from limited samples, varied process types and non-standardized processes. Aiming at predicting and controlling the influence of the construction process on the construction quality of ships, this article proposes a reliability quantitative analysis flow path for the ship construction process and fuzzy calculation method. Based on the process-quality factor model proposed by the Function-Oriented Quality Control (FOQC method, we combine fuzzy mathematics with the expert grading method to deduce formulations calculating the fuzzy process reliability of the ordinal connection model, series connection model and mixed connection model. The quantitative analysis method is applied in analyzing the process reliability of a ship's shaft gear box installation, which proves the applicability and effectiveness of the method. The analysis results can be a useful reference for setting key quality inspection points and optimizing key processes.

Orchestrating Transnational Environmental Governance in Maritime Shipping

DEFF Research Database (Denmark)

Lister, Jane; Taudal Poulsen, René; Ponte, Stefano

2015-01-01

Maritime shipping is the transmission belt of the global economy. It is also a major contributor to global environmental change through its under-regulated air, water and land impacts. It is puzzling that shipping is a lagging sector as it has a well-established global regulatory body—the Interna......Maritime shipping is the transmission belt of the global economy. It is also a major contributor to global environmental change through its under-regulated air, water and land impacts. It is puzzling that shipping is a lagging sector as it has a well-established global regulatory body......—the International Maritime Organization. Drawing on original empirical evidence and archival data, we introduce a four-factor framework to investigate two main questions: why is shipping lagging in its environmental governance; and what is the potential for the International Maritime Organization to orchestrate......, and growing regulatory fragmentation and uncertainty. The paper concludes with pragmatic recommendations for the International Maritime Organization to acknowledge the regulatory difficulties and seize the opportunity to orchestrate environmental progress....

Estimation of shipping emissions in Candarli Gulf, Turkey.

Science.gov (United States)

Deniz, Cengiz; Kilic, Alper; Civkaroglu, Gökhan

2010-12-01

Ships are significant air pollution sources as their high powered main engines often use heavy fuels. The major atmospheric components emitted are nitrogen oxides, particulate matter (PM), sulfur oxide gases, carbon oxides, and toxic air pollutants. Shipping emissions cause severe impacts on health and environment. These effects of emissions are emerged especially in territorial waters, inland seas, canals, straits, bays, and port regions. Candarli Gulf is one of the major industrial regions on the Aegean side of Turkey. The marine environment of the region is affected by emissions from ships calling to ten different ports. In this study, NO( x ), SO(2), CO(2), hydrocarbons (HC), and PM emissions from 7,520 ships are estimated during the year of 2007. These emissions are classified regarding operation modes and types of ships. Annual shipping emissions are estimated as 631.2 t year(-1) for NO(x), 573.6 t year(-1) for SO(2), 33,848.9 t year(-1) for CO(2), 32.3 t year(-1) for HC, and 57.4 t year(-1) for PM.

The world's first supply ship powered by natural gas

International Nuclear Information System (INIS)

2003-01-01

The article describes the newly developed natural gas powered supply ship ''Viking Energy'', which reduces the emission of NOx by 200 tonnes per year. The shipping company has for many years been working on the developing of environmentally friendly ships with less fuel consumption. The gas is stored in liquid form at a temperature of 160 o C. The engines can run on gas or diesel as needed. These dual-fuel engines offers great flexibility, which is very desirable since liquid natural gas is not widely available along the coast. This type of engine has been used in power stations and on offshore platforms, but not in ships. The operating conditions are quite different for ships than for power stations. So far, both investment and operating costs are higher than for conventional ships

Mathematical Ship Modeling for Control Applications

DEFF Research Database (Denmark)

Perez, Tristan; Blanke, Mogens

2002-01-01

In this report, we review the models for describing the motion of a ship in four degrees of freedom suitable for control applications. We present the hydrodynamic models of two ships: a container and a multi-role naval vessel. The models are based on experimental results in the four degrees...

Reliability Based Ship Structural Design

DEFF Research Database (Denmark)

Dogliani, M.; Østergaard, C.; Parmentier, G.

1996-01-01

This paper deals with the development of different methods that allow the reliability-based design of ship structures to be transferred from the area of research to the systematic application in current design. It summarises the achievements of a three-year collaborative research project dealing...... with developments of models of load effects and of structural collapse adopted in reliability formulations which aim at calibrating partial safety factors for ship structural design. New probabilistic models of still-water load effects are developed both for tankers and for containerships. New results are presented...... structure of several tankers and containerships. The results of the reliability analysis were the basis for the definition of a target safety level which was used to asses the partial safety factors suitable for in a new design rules format to be adopted in modern ship structural design. Finally...

47 CFR 80.1099 - Ship sources of energy.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Ship sources of energy. 80.1099 Section 80.1099... Stations § 80.1099 Ship sources of energy. (a) There must be available at all times, while the ship is at... batteries used as part of a reserve source of energy for the radio installations. (b) A reserve source of...

Preliminary technical and economic viability for the implantation of fluvial transport of CNG (Compressed Natural Gas) for barges in Amazon Region; Avaliacao preliminar de viabilidade tecnico-economica para implantacao de transporte fluvial de GNC (Gas Natual Comprimido) por barcacas na Regiao Amazonica

Energy Technology Data Exchange (ETDEWEB)

Araujo, Marcos C.C. de; Porto, Paulo L. Lemgruber [Interocean Engenharia e Ship Management, Rio de janeiro, RJ (Brazil); Cunha, Rafael H. da [Metro Rio, RJ (Brazil); Garcia, Rafael M. [Pic Brasil (Brazil); Almeida, Marco A.R. de [Universidade Gama Filho (UGF), Rio de Janeiro, RJ (Brazil)

2004-07-01

The isolated regions of the Amazon present difficulties for integration with the electrical system which is creating some economic problems due to the consequent costs of electric generation of subsidies as a function of the fossil fuel use as oils diesel and fuel. A viable option is the use of Natural Gas - NG that is Also available in the region. Its modal of transport possible in the Region North they are for gas-lines or barges. The Compressed Natural Gas transport is distinguished that - CNG for barges was still not tested operationally in Brazil. Soon, to develop a Preliminary Study of Viability Technician - Economic - SVTE for the implantation of fluvial transport of CNG between the cities of Coari and Manaus is basic, therefore it is created strategical alternative for the electric generation in this region. The electric sector, the characteristics of the NG and the transport in this region had been analyzed to support to the work. The gas line and the fluvial transport of CNG for barges in this region are not conflicting, and they in a complementary form can act. The SVTE presented a Liquid Present Value and Internal Tax of very attractive Return justifying its implantation. (author)

Analysis of ship maneuvering data from simulators

Science.gov (United States)

Frette, V.; Kleppe, G.; Christensen, K.

2011-03-01

We analyze complex manuevering histories of ships obtained from training sessions on bridge simulators. Advanced ships are used in fields like offshore oil exploration: dive support vessels, supply vessels, anchor handling vessels, tugs, cable layers, and multi-purpose vessels. Due to high demands from the operations carried out, these ships need to have very high maneuverability. This is achieved through a propulsion system with several thrusters, water jets, and rudders in addition to standard propellers. For some operations, like subsea maintenance, it is crucial that the ship accurately keeps a fixed position. Therefore, bridge systems usually incorporate equipment for Dynamic Positioning (DP). DP is a method to keep ships and semi submersible rigs in a fixed position using the propulsion systems instead of anchors. It may also be used for sailing a vessel from one position to another along a predefined route. Like an autopilot on an airplane, DP may operate without human involvement. The method relies on accurate determination of position from external reference systems like GPS, as well as a continuously adjusted mathematical model of the ship and external forces from wind, waves and currents. In a specific simulator exercise for offshore crews, a ship is to be taken up to an installation consisting of three nearby oil platforms connected by bridges (Frigg field, North Sea), where a subsea inspection is to be carried out. Due to the many degrees of freedom during maneuvering, including partly or full use of DP, the chosen routes vary significantly. In this poster we report preliminary results on representations of the complex maneuvering histories; representations that allow comparison between crew groups, and, possibly, sorting of the different strategic choices behind.

Solving the Liner Shipping Fleet Repositioning Problem with Cargo Flows

DEFF Research Database (Denmark)

Tierney, Kevin; Askelsdottir, Björg; Jensen, Rune Møller

2015-01-01

We solve a central problem in the liner shipping industry called the liner shipping fleet repositioning problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between routes in a liner shipping network. Liner carriers wish...

Transport impacts on atmosphere and climate: Shipping

Science.gov (United States)

Eyring, Veronika; Isaksen, Ivar S. A.; Berntsen, Terje; Collins, William J.; Corbett, James J.; Endresen, Oyvind; Grainger, Roy G.; Moldanova, Jana; Schlager, Hans; Stevenson, David S.

2010-12-01

Emissions of exhaust gases and particles from oceangoing ships are a significant and growing contributor to the total emissions from the transportation sector. We present an assessment of the contribution of gaseous and particulate emissions from oceangoing shipping to anthropogenic emissions and air quality. We also assess the degradation in human health and climate change created by these emissions. Regulating ship emissions requires comprehensive knowledge of current fuel consumption and emissions, understanding of their impact on atmospheric composition and climate, and projections of potential future evolutions and mitigation options. Nearly 70% of ship emissions occur within 400 km of coastlines, causing air quality problems through the formation of ground-level ozone, sulphur emissions and particulate matter in coastal areas and harbours with heavy traffic. Furthermore, ozone and aerosol precursor emissions as well as their derivative species from ships may be transported in the atmosphere over several hundreds of kilometres, and thus contribute to air quality problems further inland, even though they are emitted at sea. In addition, ship emissions impact climate. Recent studies indicate that the cooling due to altered clouds far outweighs the warming effects from greenhouse gases such as carbon dioxide (CO 2) or ozone from shipping, overall causing a negative present-day radiative forcing (RF). Current efforts to reduce sulphur and other pollutants from shipping may modify this. However, given the short residence time of sulphate compared to CO 2, the climate response from sulphate is of the order decades while that of CO 2 is centuries. The climatic trade-off between positive and negative radiative forcing is still a topic of scientific research, but from what is currently known, a simple cancellation of global mean forcing components is potentially inappropriate and a more comprehensive assessment metric is required. The CO 2 equivalent emissions using

Contribution of ship traffic to aerosol particle concentrations downwind of a major shipping lane

DEFF Research Database (Denmark)

Kivekäs, N.; Massling, Andreas; Grythe, H.

2014-01-01

at a remote location. We studied the particle number concentration (12 to 490 nm in diameter), the mass concentration (12 to 150 nm in diameter) and number and volume size distribution of aerosol particles in ship plumes for a period of 4.5 months at Hovsore, a coastal site on the western coast of Jutland...... in Denmark. During episodes of western winds, the site is about 50 km downwind of a major shipping lane and the plumes are approximately 1 hour old when they arrive at the site. We have used a sliding percentile-based method for separating the plumes from the measured background values and to calculate...... the ship plume contribution to the total particle number and PM0.15 mass concentration (mass of particles below 150 nm in diameter, converted from volume assuming sphericity) at the site. The method is not limited to particle number or volume concentration, but can also be used for different chemical...

Recovery from TBT pollution in English Channel environments: A problem solved?

Science.gov (United States)

Langston, W J; Pope, N D; Davey, M; Langston, K M; O' Hara, S C M; Gibbs, P E; Pascoe, P L

2015-06-30

Following recognition of effects in the 1980s, tributyltin (TBT) has been monitored at sites in the English Channel to evaluate the prognosis for biota - spanning the introduction of restrictions on TBT use on small boats and the recent phase-out on the global fleet. We describe how persistence and impact of TBT in clams Scrobicularia plana has changed during this period in Southampton Water and Poole Harbour. TBT contamination (and loss) in water, sediment and clams reflects the abundance and type of vessel activity: half-times in sediment (up to 8y in Poole, 33y in Southampton) are longest near commercial shipping. Recovery of clam populations - slowest in TBT-contaminated deposits - provides a useful biological measure of legislative efficacy in estuaries. On rocky shores, recovery from imposex in Nucella lapillus is evident at many sites but, near ports, is prolonged by shipping impacts, including sediment legacy, for example, in the Fal. Copyright © 2014 Elsevier Ltd. All rights reserved.

47 CFR 80.1121 - Receipt and acknowledgement of distress alerts by ship stations and ship earth stations.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Receipt and acknowledgement of distress alerts by ship stations and ship earth stations. 80.1121 Section 80.1121 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS)...

Estimation of waves and ship responses using onboard measurements

DEFF Research Database (Denmark)

Montazeri, Najmeh

This thesis focuses on estimation of waves and ship responses using ship-board measurements. This is useful for development of operational safety and performance efficiency in connection with the broader concept of onboard decision support systems. Estimation of sea state is studied using a set...... of measured ship responses, a parametric description of directional wave spectra (a generalised JONSWAP model) and the transfer functions of the ship responses. The difference between the spectral moments of the measured ship responses and the corresponding theoretically calculated moments formulates a cost...... information. The model is tested on simulated data based on known unimodal and bimodal wave scenarios. The wave parameters in the output are then compared with the true wave parameters. In addition to the numerical experiments, two sets of full-scale measurements from container ships are analysed. Herein...

Black carbon from ships: a review of the effects of ship speed, fuel quality and exhaust gas scrubbing

Directory of Open Access Journals (Sweden)

D. A. Lack

2012-05-01

Full Text Available The International Maritime Organization (IMO has moved to address the health and climate impact of the emissions from the combustion of low-quality residual fuels within the commercial shipping industry. Fuel sulfur content (F_S limits and an efficiency design index for future ships are examples of such IMO actions. The impacts of black carbon (BC emissions from shipping are now under review by the IMO, with a particular focus on the potential impacts of future Arctic shipping.

Recognizing that associating impacts with BC emissions requires both ambient and onboard observations, we provide recommendations for the measurement of BC. We also evaluate current insights regarding the effect of ship speed (engine load, fuel quality and exhaust gas scrubbing on BC emissions from ships. Observations demonstrate that BC emission factors (EF_BC increases 3 to 6 times at very low engine loads (<25% compared to EF_BC at 85–100% load; absolute BC emissions (per nautical mile of travel also increase up to 100% depending on engine load, even with reduced load fuel savings. If fleets were required to operate at lower maximum engine loads, presumably associated with reduced speeds, then engines could be re-tuned, which would reduce BC emissions.

Ships operating in the Arctic are likely running at highly variable engine loads (25–100% depending on ice conditions and ice breaking requirements. The ships operating at low load may be emitting up to 50% more BC than they would at their rated load. Such variable load conditions make it difficult to assess the likely emissions rate of BC.

Current fuel sulfur regulations have the effect of reducing EF_BC by an average of 30% and potentially up to 80% regardless of engine load; a removal rate similar to that of scrubbers.

Uncertainties among current observations demonstrate there is a need for more information on a the impact of fuel quality

Temporal variability of mass transport across Canary Islands Channels

Science.gov (United States)

Marrero-Díaz, Ángeles; Rodríguez-Santana, Ángel; José Machín, Francisco; García-Weil, Luis; Sangrà, Pablo; Vélez-Belchí, Pedro; Fraile-Nuez, Eugenio

2014-05-01

The equatorward flowing Canary Current (CC) is the main feature of the circulation in the Canary Islands region. The CC flow perturbation by the Canary Islands originate the Canary Eddy Corridor which is the major pathway for long lived eddies in the subtropical North Atlantic (Sangrà et al., 2009, DSR). Therefore the variability of the CC passing through the Canary Archipelago will have both local and regional importance. Past studies on the CC variability trough the Canary Islands point out a clearly seasonal variability (Fraile-Nuez et al, 2010 (JGR); Hernández-Guerra et al, 2002 (DSR)). However those studies where focused on the eastern islands channels missing the variability through the western island channels which are the main source of long lived eddies. In order to fill this gap from November 2012 until September 2013 we conducted trimonthly surveys crossing the whole islands channels using opportunity ships (Naviera Armas Ferries). XBT and XCTD where launched along the cross channels transects. Additionally a closed box circling the Archipelago was performed on October 2013 as part of the cruise RAPROCAN-2013 (IEO) using also XBT and XCTD. Dynamical variables where derived inferring salinity from S(T,p) analytical relationships for the region updated with new XCTD data. High resolution, vertical sections of temperature, potential density, geostrophic velocity and transport where obtained. Our preliminary results suggest that the CC suffer a noticeable acceleration in those islands channels where eddy shedding is more frequent. They also indicate a clearly seasonal variability of the flows passing the islands channels. With this regard we observed significant differences on the obtained seasonal variability with respect the cited past studies on the eastern islands channel (Lanzarote / Fuerteventura - Africa coast). This work was co-funded by Canary Government (TRAMIC project: PROID20100092) and the European Union (FEDER).

49 CFR 172.201 - Preparation and retention of shipping papers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Preparation and retention of shipping papers. 172..., TRAINING REQUIREMENTS, AND SECURITY PLANS Shipping Papers § 172.201 Preparation and retention of shipping papers. (a) Contents. When a description of hazardous material is required to be included on a shipping...

An Enterprise Model of Rising Ship Costs: Loss of Learning Due to Time between Ships and Labor Force Instability

OpenAIRE

Summerville, Jessica R.; Cullis, Bethia L.; Druker, Eric R.; Rutledge, Gabriel B.; Braxton, Peter J.; Coleman, Richard L.

2007-01-01

Proceedings Paper (for Acquisition Research Program) Since the end of the Cold War, the perceived need for Navy ships has dropped, and so the shipbuilding budget has dropped. Seemingly coincidental with this budgetary pressure, and perversely aggravating the problem, ship costs began to rise steeply. We will set aside that ships have grown in weight by about three percent per year since World War II and that ever-more weapon systems are being put into them, and confine ourselves to discu...

IS INLAND SHIPPING NEEDED IN POLAND?

Directory of Open Access Journals (Sweden)

Ryszard Rolbiecki

2014-06-01

Full Text Available In Poland, inland shipping plays only a mariginal role in transport needs fulfillment. Inland shipping has a share of mere 0,3% in goods transport modal split. The reason for this is poor and variable technical parameters of inland waterways together with adverse legal regulations. Different situation takes place in Western European countries, in which the development of this mode of transport is viewed as a way of road transport develop-ment restraint. In Poland, the need to move some of the volume from road transport to in-land shipping is specifically observed within marine ports surroundings. Because of their complex nature, the investments in inland shipping infrastructure would also be helpful in solving the current problems of water management. Inland waterways in Poland guaran-tee neither an adequate level of flood protection, nor the water needs fulfillment of do-mestic economy. When it comes to water reserves, Poland is one of the most deficient countries in Europe. Thus there is a need to invest in inland waterways in Poland.

32 CFR 700.873 - Inspection incident to commissioning of ships.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Inspection incident to commissioning of ships... Inspection incident to commissioning of ships. When a ship is to be commissioned, the authority designated to place such ship in commission shall, just prior to commissioning, cause an inspection to be made to...

46 CFR 153.12 - IMO Certificates for United States Ships.

Science.gov (United States)

2010-10-01

... 8, or the Officer in Charge, Marine Inspection, issues a United States ship an IMO Certificate... 46 Shipping 5 2010-10-01 2010-10-01 false IMO Certificates for United States Ships. 153.12 Section... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS General § 153.12...

46 CFR 167.15-20 - Inspections of nautical school ships.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Inspections of nautical school ships. 167.15-20 Section... NAUTICAL SCHOOL SHIPS Inspections § 167.15-20 Inspections of nautical school ships. (a) At each annual inspection, or oftener if deemed necessary, the inspector will inspect the hull, boilers, machinery...

Legionella risk assessment in cruise ships and ferries.

Science.gov (United States)

Laganà, Pasqualina; Gambuzza, Maria Elsa; Delia, Santi

2017-06-12

Introduction. The increasing development of marine traffic has led to a rise in the incidence of legionellosis among travellers. It occurs in similar environments, especially closed and crowded, and aboard ships Legionella survives and multiplies easily in water pipes, spreading into the environment through air conditioning systems and water distribution points. Although in recent years in the construction of cruise ships preventive measures aimed at curbing the proliferation of Legionella (design, materials, focus on the operation and maintenance of the water system), have been taken account, little or no attention has been paid to small ships which, in many cases, are old and not well maintained. Objective. The aim of the study was to evaluate the frequency and severity of Legionella contamination in ferries and cruise ships in order to adopt more specific control measures. Materials and method. A prevalence study was carried out on 10 ferries and 6 cruise ships docking or in transit across the port of Messina (Sicily, Italy). Water and air samples collected from many critical points were tested for qualitative and quantitative identification of Legionella. Results and conclusions. Legionella pneumophila sg 1 was isolated from the samples of shower and tap water in 7 (70%) of the 10 ferries examined, and in 3 (33%) of the 6 cruise ships examined, and L. pneumophila sg 2-14 in 8 (80%) and 1 (16.7%) of these ships, respectively. No Legionella contamination was found in whirlpool baths, air and ice samples. In conclusion, the data obtained confirm higher levels of Legionella contamination in local ferries and cruise ships, underlining the need to adopt corrective actions more specific for these smaller vessels.

Review of the total system related to operation of nuclear-powered ship

International Nuclear Information System (INIS)

Takamasa, Tomoji; Miyashita, Kunio

2000-01-01

It is essential to establish a marine reactor having excellent safety and reliability, which is capable of competing economically with conventional ships, and which can be accepted by international society, in order to be prepared for practical application of future nuclear-powered ships. For this purpose, it is important not only to demonstrate a marine reactor using a model or test device to simulate actual operation, but also to establish the environmental requirements for operation of a nuclear-powered ship, such as safety standards that are operationally and internationally common for ships, and to establish a repair base for nuclear-powered ships. Systems research for the practical application of nuclear-powered ships was conducted for five years, fiscal years 1992 through 1996, by a group in the Japan Atomic Energy Research Institute (JAERI), under the project title 'Review of the total system related to operation of nuclear-powered ships.' The project sought to summarize requirements for the practical application of nuclear-powered ships from the standpoint of the need side, e.g., what nuclear-powered ships will be requested, and what functions will be provided under the expected future social environment; to show a complete system concept for the operation of nuclear-powered ships; and to clarify the situations creating demand for nuclear-powered ships, as well as the system and environmental conditions to be established for operation of practical nuclear-powered ships. Study considerations included the size of the operation system for a nuclear-powered ship, a scenario for introducing a nuclear-powered container ship, and economic evolution from the effects on the whole shipping system, based on container ships, of introducing a nuclear-powered ship. The results of these considerations were made the framework for constructing an entire system and evaluating its economy. The treatment and disposal of radioactive waste from a nuclear-powered ship, and the

Design of Crashworthy Ship Strucures

DEFF Research Database (Denmark)

Toernqvist, Rikard

2003-01-01

The main purpose of the project has been to develop a rational procedure for designing new crashworthy side structures for those ship types where it could be expected that a substantial improvement of the crashworthiness and the related safety could be achieved by careful consideration of the str......The main purpose of the project has been to develop a rational procedure for designing new crashworthy side structures for those ship types where it could be expected that a substantial improvement of the crashworthiness and the related safety could be achieved by careful consideration...... in collision and grounding analysis is the prediction of the onset of fracture and crack propagation in the shell plating. In simulations of accidental loading on ships it is crucial that fracture is determined correctly, as it will influence the global deformation mode and the amount of damage to the hull...

On Grounding of Fast Ships

DEFF Research Database (Denmark)

Simonsen, Bo Cerup; Pedersen, Preben Terndrup

1997-01-01

The paper deals with analysis of grounding of high-speed crafts. It is the purpose to present a comprehensive mathematical model for calculation of the overall dynamic ship response during grounding. This procedure is applied to derive the motions, the time varying sectional forces and the local...... loads during grounding on plane, sloping, sandy bottoms for six different designs of fast monohull ships made from steel, aluminium or GRP sandwich materials. The results show that the effect of the hull flexibility is to reduce the overall dynamic sectional loads on the hull girder. The considered...... numerical examples also indicate that, even with impact speeds of 40 knots against a 1:10 sloping bottom, the global strength of the hull girder is not exceeded by the grounding induced loads.For the local deformation of high-speed ship hulls at the point of contact with the ground, the paper presents...

Experimental and theoretical study of magnetohydrodynamic ship models.

Science.gov (United States)

Cébron, David; Viroulet, Sylvain; Vidal, Jérémie; Masson, Jean-Paul; Viroulet, Philippe

2017-01-01

Magnetohydrodynamic (MHD) ships represent a clear demonstration of the Lorentz force in fluids, which explains the number of students practicals or exercises described on the web. However, the related literature is rather specific and no complete comparison between theory and typical small scale experiments is currently available. This work provides, in a self-consistent framework, a detailed presentation of the relevant theoretical equations for small MHD ships and experimental measurements for future benchmarks. Theoretical results of the literature are adapted to these simple battery/magnets powered ships moving on salt water. Comparison between theory and experiments are performed to validate each theoretical step such as the Tafel and the Kohlrausch laws, or the predicted ship speed. A successful agreement is obtained without any adjustable parameter. Finally, based on these results, an optimal design is then deduced from the theory. Therefore this work provides a solid theoretical and experimental ground for small scale MHD ships, by presenting in detail several approximations and how they affect the boat efficiency. Moreover, the theory is general enough to be adapted to other contexts, such as large scale ships or industrial flow measurement techniques.

Experimental and theoretical study of magnetohydrodynamic ship models.

Directory of Open Access Journals (Sweden)

David Cébron

Full Text Available Magnetohydrodynamic (MHD ships represent a clear demonstration of the Lorentz force in fluids, which explains the number of students practicals or exercises described on the web. However, the related literature is rather specific and no complete comparison between theory and typical small scale experiments is currently available. This work provides, in a self-consistent framework, a detailed presentation of the relevant theoretical equations for small MHD ships and experimental measurements for future benchmarks. Theoretical results of the literature are adapted to these simple battery/magnets powered ships moving on salt water. Comparison between theory and experiments are performed to validate each theoretical step such as the Tafel and the Kohlrausch laws, or the predicted ship speed. A successful agreement is obtained without any adjustable parameter. Finally, based on these results, an optimal design is then deduced from the theory. Therefore this work provides a solid theoretical and experimental ground for small scale MHD ships, by presenting in detail several approximations and how they affect the boat efficiency. Moreover, the theory is general enough to be adapted to other contexts, such as large scale ships or industrial flow measurement techniques.

Di-nuclear systems studied with the velocity filter SHIP

Energy Technology Data Exchange (ETDEWEB)

Heinz, S.; Hessberger, F.P.; Ackermann, D.; Burkhard, H.G.; Khuyagbaatar, J.; Kindler, B.; Lommel, B.; Mann, R.; Maurer, J. [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Comas, V.; Heredia, J. [Institute of Technologies and Applied Sciences, Habana (Cuba); Hofmann, S. [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Goethe-Universitaet Frankfurt, Institut fuer Physik, Frankfurt (Germany); Gan, Z. [Chinese Academy of Sciences, Institute of Modern Physics, Lanzhou (China); Nishio, K. [Japan Atomic Energy Agency (JAEA), Tokai, Ibaraki (Japan); Sulignano, B. [DAPNIA / SPhN, CEA Saclay, Gif-sur-Yvette Cedex (France)

2008-11-15

Various nuclear reactions like quasi-fission, fusion-fission or particle and cluster evaporation from excited compound nuclei were studied in heavy-ion reactions at the velocity filter SHIP of GSI. The velocity filter offers the possibility to detect all reaction products under zero degree relative to the beam direction. Together with the measurement of the product velocity distribution this allows for an identification of the underlying reaction mechanism. This article is focussed on reactions of {sup 25}Mg and {sup 64}Ni beams on {sup 206,207}Pb targets at energies of 5.9 x A MeV and 8.7 x A MeV. Besides evaporation residues from {sup 25}Mg+{sup 206}Pb collisions we found evidence for rotation and quasi-fission of nuclear molecules formed in the entrance channel after the capture stage. The break-up of the systems showed a preferred clustering leading to isotopes in the region 84{<=}Z{<=}88 and 122{<=}N{<=}127 of the chart of nuclei. (orig.)

Global ship accidents and ocean swell-related sea states

Directory of Open Access Journals (Sweden)

Z. Zhang

2017-11-01

Full Text Available With the increased frequency of shipping activities, navigation safety has become a major concern, especially when economic losses, human casualties and environmental issues are considered. As a contributing factor, the sea state plays a significant role in shipping safety. However, the types of dangerous sea states that trigger serious shipping accidents are not well understood. To address this issue, we analyzed the sea state characteristics during ship accidents that occurred in poor weather or heavy seas based on a 10-year ship accident dataset. Sea state parameters of a numerical wave model, i.e., significant wave height, mean wave period and mean wave direction, were analyzed for the selected ship accident cases. The results indicated that complex sea states with the co-occurrence of wind sea and swell conditions represent threats to sailing vessels, especially when these conditions include similar wave periods and oblique wave directions.

Global ship accidents and ocean swell-related sea states

Science.gov (United States)

Zhang, Zhiwei; Li, Xiao-Ming

2017-11-01

With the increased frequency of shipping activities, navigation safety has become a major concern, especially when economic losses, human casualties and environmental issues are considered. As a contributing factor, the sea state plays a significant role in shipping safety. However, the types of dangerous sea states that trigger serious shipping accidents are not well understood. To address this issue, we analyzed the sea state characteristics during ship accidents that occurred in poor weather or heavy seas based on a 10-year ship accident dataset. Sea state parameters of a numerical wave model, i.e., significant wave height, mean wave period and mean wave direction, were analyzed for the selected ship accident cases. The results indicated that complex sea states with the co-occurrence of wind sea and swell conditions represent threats to sailing vessels, especially when these conditions include similar wave periods and oblique wave directions.

Radiative Forcing Over Ocean by Ship Wakes

Science.gov (United States)

Gatebe, Charles K.; Wilcox, E.; Poudyal, R.; Wang, J.

2011-01-01

Changes in surface albedo represent one of the main forcing agents that can counteract, to some extent, the positive forcing from increasing greenhouse gas concentrations. Here, we report on enhanced ocean reflectance from ship wakes over the Pacific Ocean near the California coast, where we determined, based on airborne radiation measurements that ship wakes can increase reflected sunlight by more than 100%. We assessed the importance of this increase to climate forcing, where we estimated the global radiative forcing of ship wakes to be -0.00014 plus or minus 53% Watts per square meter assuming a global distribution of 32331 ships of size of greater than or equal to 100000 gross tonnage. The forcing is smaller than the forcing of aircraft contrails (-0.007 to +0.02 Watts per square meter), but considering that the global shipping fleet has rapidly grown in the last five decades and this trend is likely to continue because of the need of more inter-continental transportation as a result of economic globalization, we argue that the radiative forcing of wakes is expected to be increasingly important especially in harbors and coastal regions.

Capital structure in the global shipping industry

Directory of Open Access Journals (Sweden)

Paun Cristian

2016-01-01

Full Text Available The current economic crisis emerged from a particular financial crisis that started in the United States and being rapidly propagated all over the world. It did not affect a limited region or a limited economic sector. This crisis induced significant changes in all management areas, including financial management. This study is focused on financing strategies adopted by shipping companies during the crisis, analyzing relevant factors for a specific issue - the capital structure. The research methodology proposed for this analysis on relevant factors that could explain the capital structure of shipping is OLS regression applied on selected variables derived from the financial statements of the major shipping companies. The dependent variables reflecting capital structure are book value to total liabilities ratio and book value to total debt ratio. The explanatory variables are derived from the theory of capital structure. This study empirically illustrates the relevance of the capital structure theory for the studied economic sector and is a useful tool for the shipping companies, providing relevant information about the optimal capital structure adopted by shipping companies and about factors that influence this decision during a crisis period.

Review of ship slamming loads and responses

Science.gov (United States)

Wang, Shan; Guedes Soares, C.

2017-12-01

The paper presents an overview of studies of slamming on ship structures. This work focuses on the hull slamming, which is one of the most important types of slamming problems to be considered in the ship design process and the assessment of the ship safety. There are three main research aspects related to the hull slamming phenomenon, a) where and how often a slamming event occurs, b) slamming load prediction and c) structural response due to slamming loads. The approaches used in each aspect are reviewed and commented, together with the presentation of some typical results. The methodology, which combines the seakeeping analysis and slamming load prediction, is discussed for the global analysis of the hull slamming of a ship in waves. Some physical phenomena during the slamming event are discussed also. Recommendations for the future research and developments are made.

Radiation protection studies for the SHiP facility

CERN Document Server

Strabel, Claudia Christina; Vincke, Helmut

2015-01-01

The enlarged scope of the recently proposed experiment to search for Heavy Neutral Leptons, SPSC-EOI-010, is a general purpose fixed target facility which in the initial phase is aimed at a general Search for Hidden Particles (SHiP) as well as tau neutrino physics. This report summarizes radiation protection considerations for the SHiP facility and the primary beam extraction for SHiP.

Analysis of Methods of Determining the Safe Ship Trajectory

Directory of Open Access Journals (Sweden)

Jozef Lisowski

2016-07-01

Full Text Available The paper describes six methods of optimal and game theory and artificial neural network for synthesis of safe control in collision situations at sea. The application of optimal and game control algorithms to determine the own ship safe trajectory during the passing of other encountered ships in good and restricted visibility at sea is presented. The comparison of the safe ship control in collision situation: multi-step matrix non-cooperative and cooperative games, multi-stage positional non-cooperative and cooperative games have been introduced. The considerations have been illustrated with examples of computer simulation of the algorithms to determine safe of own ship trajectories in a navigational situation during passing of eight met ships.

Improving the competitiveness of green ship recycling

OpenAIRE

Jain, K.P.

2017-01-01

The end of life of a ship is determined by its owner on the basis of various commercial and technical factors. Once decided to scrap a ship, almost all end-of-life (EOL) ships are sold to recycling yards for dismantling; except for a few which are converted into museums, hotels, storage, and artificial reefs. As the decision is a commercial one, the selection of a yard is predominantly based on the offer price, which depends on the location of the yard and the recycling process employed.Among...

Routing and scheduling and fleet management for liner shipping

DEFF Research Database (Denmark)

Kjeldsen, Karina Hjortshøj

2009-01-01

The problem of routing, scheduling and fleet management in global liner shipping is presented. The developed model incorporates the ships' speed as a decision variable. Furthermore, the model must be able to handle problems of the size and complexity experienced by the global liner shipping...

Maneuverability of Ships with small Draught in Steady Wind

Directory of Open Access Journals (Sweden)

Daeng Paroka

2016-04-01

Full Text Available Wind force and moment may force a ship to drastically decrease its speed and use a large drift angle as well as a large rudder angle in order to maintain its course. Shipswith a small draught might have more risk in maneuvering to its point of view compared with a ship with a larger draught. This paper discusses maneuverability of a ship with a small draught in steady wind. The effect of wind on ship speed, drift angle, and rudder angle are investigated in a steady state condition. Five different ratios of wind velocity to ship speed from 1.0 to 20.0 are used in the simulation. The variation in wind direction is examined from 0°to 180°. Results of the numerical simulation show that thewind has a significant effect on the reduction in ship speed with a wind direction less than 100°. The drift angle increases due to increasing wind velocity in the same wind direction. Wind direction also has a significant effect on the drift angle especially when the wind direction is less than 140°. The same phenomenon was found for the rudder angle. The necessary rudder angle is greater than the maximum rudder angle of the ship when the wind direction is 60°with a wind velocity to ship speed ratio of 20 or more.

The activity-based methodology to assess ship emissions - A review.

Science.gov (United States)

Nunes, R A O; Alvim-Ferraz, M C M; Martins, F G; Sousa, S I V

2017-12-01

Several studies tried to estimate atmospheric emissions with origin in the maritime sector, concluding that it contributed to the global anthropogenic emissions through the emission of pollutants that have a strong impact on hu' health and also on climate change. Thus, this paper aimed to review published studies since 2010 that used activity-based methodology to estimate ship emissions, to provide a summary of the available input data. After exclusions, 26 articles were analysed and the main information were scanned and registered, namely technical information about ships, ships activity and movement information, engines, fuels, load and emission factors. The larger part of studies calculating in-port ship emissions concluded that the majority was emitted during hotelling and most of the authors allocating emissions by ship type concluded that containerships were the main pollutant emitters. To obtain technical information about ships the combined use of data from Lloyd's Register of Shipping database with other sources such as port authority's databases, engine manufactures and ship-owners seemed the best approach. The use of AIS data has been growing in recent years and seems to be the best method to report activities and movements of ships. To predict ship powers the Hollenbach (1998) method which estimates propelling power as a function of instantaneous speed based on total resistance and use of load balancing schemes for multi-engine installations seemed to be the best practices for more accurate ship emission estimations. For emission factors improvement, new on-board measurement campaigns or studies should be undertaken. Regardless of the effort that has been performed in the last years to obtain more accurate shipping emission inventories, more precise input data (technical information about ships, engines, load and emission factors) should be obtained to improve the methodology to develop global and universally accepted emission inventories for an

Numerical Study on the Effect of Buffer Bow Structure in Ship-to-ship Collisions

DEFF Research Database (Denmark)

Yamada, Yasuhira; Endo, Hisayoshi; Pedersen, Preben Terndrup

2005-01-01

tankers, the introduction of buffer bulbous bows has been proposed. Relatively soft buffer bows absorb part of the kinetic energy of the striking ship before penetrating the inner hull of the struck vessel. The purpose of the present paper is to verify the effectiveness of a prototype buffer bulbous bow......) and the forward velocity of the struck ship on the collapse mode of the bow of the striking vessel are investigated. Collapse modes, contact forces and energy absorption capabilities of the buffer bows are compared with those of conventional bows....

Offshore concrete structures

International Nuclear Information System (INIS)

Lamas Pardo, M.; Carral Couce, L. M.

2011-01-01

In the offshore industry there are two possible materials for the construction of the hull of a structure; the steel and concrete, with the first one widely used until now, as in the rest of the shiphuidling industry of merchant ships, warships, etc. Materials such as aluminum, GRP or timber areused in small units with lengths lower than 100 m, and in less adverse conditions than in the offshore industry. Nevertheless, some ships/barges have been built of concrete in the past, but have been rather isolated cases which have not changed the practice in the industry. In the First and Second World War were built by the scarcity of materials, while the series of barges by Alfred A. Yee was a rare exception. Other units were also made in concrete, but almost anecdotal. Still, the behaviour of these concrete structures, especially in terms of maintenance, has been excellent. Therefore, the fact that the concrete has not had an adequate reception so far in shipbuilding, does not mean that in will not be the material best suited for the offshore industry in the future. The extra displacement and associated fuel costs in concrete ships have been found prohibitive in the past. But the loss of mobility of a concrete hull in relation to a steel hull can be perfectly offset by the advantages offered by the concrete, as the shipping and offshore industry have very different priorities. One of the main differences in these priorities is in terms of maintenance and resistance to fatigue, precisely where the concrete performs better. ships can easily be dry docked for maintenance and repair, while in the offshore platforms these works have to be done in situ so maintenance and fatigue are crucial to them. Besides these, the concrete has other advantages according to findings of several studies. And although they are interested in the conclusions that the makes as they came from people in the concrete industry, the fact that in recent years concrete offshore unit shave been built

Offshore concrete structures; Estructuras Offshore (mar adentro) de Hormigon

Energy Technology Data Exchange (ETDEWEB)

Lamas Pardo, M.; Carral Couce, L. M.

2011-07-01

In the offshore industry there are two possible materials for the construction of the hull of a structure; the steel and concrete, with the first one widely used until now, as in the rest of the shipbuilding industry of merchant ships, warships, etc. Materials such as aluminum, GRP or timber areused in small units with lengths lower than 100 m, and in less adverse conditions than in the offshore industry. Nevertheless, some ships/barges have been built of concrete in the past, but have been rather isolated cases which have not changed the practice in the industry. In the First and Second World War were built by the scarcity of materials, while the series of barges by Alfred A. Yee was a rare exception. Other units were also made in concrete, but almost anecdotal. Still, the behaviour of these concrete structures, especially in terms of maintenance, has been excellent. Therefore, the fact that the concrete has not had an adequate reception so far in shipbuilding, does not mean that in will not be the material best suited for the offshore industry in the future. The extra displacement and associated fuel costs in concrete ships have been found prohibitive in the past. But the loss of mobility of a concrete hull in relation to a steel hull can be perfectly offset by the advantages offered by the concrete, as the shipping and offshore industry have very different priorities. One of the main differences in these priorities is in terms of maintenance and resistance to fatigue, precisely where the concrete performs better. ships can easily be dry docked for maintenance and repair, while in the offshore platforms these works have to be done in situ so maintenance and fatigue are crucial to them. Besides these, the concrete has other advantages according to findings of several studies. And although they are interested in the conclusions that the makes as they came from people in the concrete industry, the fact that in recent years concrete offshore unit shave been built

Modelling ship operational reliability over a mission under regular inspections

NARCIS (Netherlands)

Christer, A.H.; Lee, S.K.

1997-01-01

A ship is required to operate for a fixed mission period. Should a critical item of equipment fail at sea, the ship is subject to a costly event with potentially high risk to ship and crew. Given warning of a pending defect, the ship can try to return to port under its own power and thus attempt to

A Mathematical Model for Analysis on Ships Collision Avoidance ...

African Journals Online (AJOL)

This study develops a mathematical model for analysis on collision avoidance of ships. The obtained model provides information on the quantitative effect of the ship's engine's response and the applied reversing force on separation distance and stopping abilities of the ships. Appropriate evasive maneuvers require the ...

A Way Forward for Ship Classification and Technical Services

Directory of Open Access Journals (Sweden)

Lam-Bee Goh

2014-04-01

Full Text Available Classification societies are one of key organizations that promote the highest standards in ship safety and quality shipping. The paper reviews the ship classification industry and identifies what the classification societies can do to add value to the maritime industry more effectively. To meet this objective, an analysis of the five competitive forces is carried out, together with an opinion survey performed on some of the leading shipping companies, to assess and to establish some of the key factors which should be considered when formulating an overall business strategy for the growth of the classification services business. The findings from the study are discussed with the strategic options and choices. A classification services industrial value chain analysis together with ship management and operation is undertaken to explore the opportunities for classification societies. These findings also provide guidance to policy-makers who design and seek to implement more effective international shipping policies.

Can we always ignore ship-generated food waste?

International Nuclear Information System (INIS)

Polglaze, John

2003-01-01

Considerable quantities of food waste can be generated at a rapid rate in ships, particularly those with large numbers of people onboard. By virtue of the amounts involved and its nature, food waste is potentially the most difficult to manage component of a ship's garbage stream, however, in most sea areas it may be dealt with by the simple expedient of direct discharge to sea. As a consequence, only minimal attention is paid to food waste management by many ship and port operators and advisory bodies, and there is a paucity of information in the available literature. The determination that management of ships' food waste is inconsequential is, however, incorrect in many circumstances. Disposal to sea is not always possible due to restrictions imposed by MARPOL 73/78 and other marine pollution control instruments. Effective management of food waste can be critical for ships that operate in areas where disposal is restricted or totally prohibited

The Ship Movement Trajectory Prediction Algorithm Using Navigational Data Fusion.

Science.gov (United States)

Borkowski, Piotr

2017-06-20

It is essential for the marine navigator conducting maneuvers of his ship at sea to know future positions of himself and target ships in a specific time span to effectively solve collision situations. This article presents an algorithm of ship movement trajectory prediction, which, through data fusion, takes into account measurements of the ship's current position from a number of doubled autonomous devices. This increases the reliability and accuracy of prediction. The algorithm has been implemented in NAVDEC, a navigation decision support system and practically used on board ships.

Fuel exchanger for nuclear ships

International Nuclear Information System (INIS)

Suda, Koji; Kanbara, Takahisa; Watanabe, Masaharu.

1984-01-01

Purpose: To prevent enviromental contamination landing radioactive materials from the inside of a ship. Constitution: A provisional cabin having a shape covering a reactor hatch and a hatch cover is disposed on the upper deck of a ship body. A ceiling shutter is disposed to the cabin. A protection cylinder having a shutter and a filter fan is attached on the cabin. Materials to be discharged out of the ship are transported to a fuel exchange tower on land by using a crane while being contained in the protection cylinder with the shutter being closed. The protection cylinder is connected by means of a wire rope to a loop-wheel machine which disposed on the trolly of a crane. While the bellows through which the suspending wire for the discharged products passes is perforated, since the inside of the cylinder is depressurized by a filter fan, there is no air leakage through the perforation to the outside. (Ikeda, J.)

Fuel exchanger for nuclear ships

Energy Technology Data Exchange (ETDEWEB)

Suda, Koji; Kanbara, Takahisa; Watanabe, Masaharu

1984-11-29

To prevent enviromental contamination by radioactive materials from the inside of a ship a provisional cabin having a shape covering a reactor hatch and a hatch cover is disposed on the upper deck of a ship body. A ceiling shutter is disposed to the cabin. A protection cylinder having a shutter and a filter fan is attached on the cabin. Materials to be discharged out of the ship are transported to a fuel exchange tower on land by using a crane while being contained in the protection cylinder with the shutter being closed. The protection cylinder is connected by means of a wire rope to a loop-wheel machine which is disposed on the trolly of a crane. While the bellows through which the suspending wire for the discharged products passes is perforated, since the inside of the cylinder is depressurized by a filter fan, there is no air leakage through the perforation to the outside.

Strength of Ship Plates under Combined Loading

DEFF Research Database (Denmark)

Cui, W.; Wang, Y.; Pedersen, Preben Terndrup

2002-01-01

Strength of ship plates plays a significant role in the ultimate strength analysis of ship structures. In recent years several authors have proposed simplified analytical methods to calculate the ultimate strength of unstiffened plates. The majority of these investigations deal with plates subjec...

Ammonia slip measurements on ships with NO{sub x} converters. A study of different techniques

Energy Technology Data Exchange (ETDEWEB)

Fridell, Erik; Steen, Erica (IVL, Goeteborg (SE))

2007-12-15

A number of techniques to measure the concentration of ammonia in exhaust gas have been evaluated. The objective is to obtain reliable methods for measuring ammonia slip from ships equipped with SCR systems for cleaning of nitrogen oxide emissions. The methods tested are FTIR, laser absorption, a wet chemical method and a method where ammonia is oxidised into NO{sub x} over a catalyst. The laser method is an in-situ technique, where the transmitter and receiver are positioned on opposite flanges at the exhaust channel, while the other methods are ex-situ, i. e., a probe volume of gas is taken from the exhaust channel into the instrumentation. The laser method worked well in the field studies and gave results with high sensitivity and good time resolution. FTIR did not work well for low concentrations. The time resolution is good but with a delay. In cases with an uneven distribution of ammonia throughout the exhaust channel, the concentration will vary depending on the location of the probe. A strong influence of the oxygen concentration on the observed ammonia concentration was found in the laboratory study. The wet chemical method gave reliable results. The time resolution is poor and the method is sensitive to uneven distribution in the exhaust channel. The method with the oxidation catalyst worked well in the lab but not in field where the catalyst was deactivated, probably by sulphur

Strength of ship plates under combined loading

DEFF Research Database (Denmark)

Cui, Weiching; Wang, Yongjun; Pedersen, Preben Terndrup

2000-01-01

Strength of ship plates plays a significant role for the ultimate strength analysis of ship structures. In recent years several authors have proposed simplified methods to calculate the ultimate strength of unstiffened plates. The majority of these investigations deal with plates subjected to lon...

A framework to bridge the energy efficiency gap in shipping

International Nuclear Information System (INIS)

Jafarzadeh, Sepideh; Utne, Ingrid Bouwer

2014-01-01

Environmental concerns, emission regulations, fuel prices, and emission taxes increase the demand to improve energy efficiency in shipping. However, several barriers prevent the adoption of cost-effective energy saving measures. In this article a framework is offered to overcome the barriers encountered in shipping. 12 participants from five ship owners in Norway, two equipment suppliers, and a research institute have provided input to this study. The framework makes the barriers evident to ship owners and (energy) managers. It helps them to prioritize and overcome the critical barriers to improve energy efficiency in a consistent manner. Researchers and policy makers can also utilize the framework as it makes challenges to energy efficiency apparent. Finally, due to its generic structure it can be applied to industries other than shipping. - Highlights: • The article offers a framework for overcoming barriers to energy efficiency. • The framework is developed based on input from five ship owners in Norway, two equipment suppliers, and a research institute. • The article presents challenges and barriers to energy efficiency in shipping. • Possible measures for overcoming barriers in shipping are suggested. • The framework is generic in nature and can be applied to other industries

World Ships: The Solar-Photon Sail Option

Science.gov (United States)

Matloff, G. L.

The World Ship, a spacecraft large enough to simulate a small-scale terrestrial internal environment, may be the best feasible option to transfer members of a technological civilization between neighboring stars. Because of the projected size of these spacecraft, journey durations of ~1,000 years seem likely. One of the propulsion options for World Ships is the hyper-thin, likely space-manufactured solar-photon sail, unfurled as close to the migrating civilization's home star as possible. Because the sail and associated structure can be wound around the habitat while not in use, it represents the only known ultimately feasible interstellar propulsion system that can be applied for en route galactic-cosmic ray shielding as well as acceleration/ deceleration. This paper reviews the three suggested sail configurations that can be applied to world ship propulsion: parachute, hollow-body and hoop sails. Possible existing and advanced sail and structure materials and the predicted effects on the sail of the near-Sun space environment are reviewed. Consideration of solar-photon-sail World Ships also affects SETI (the Search for Extraterrestrial Intelligence). Can we detect such craft in flight? When in a star's lifetime is migration using such craft likely? What classes of stars are good candidates for solar-sail World-Ship searches?

Effect of stern hull shape on turning circle of ships

Science.gov (United States)

Jaswar, Maimun, A.; Wahid, M. A.; Priyanto, A.; Zamani, Pauzi, Saman

2012-06-01

Many factors such as: stern hull shape, length, draught, trim, propulsion system and external forces affecting the drift angle influence rate of turn and size of turning circle of ships. This paper discusses turning circle characteristics of U and V stern hull shape of Very Large Crude Oil Carrier (VLCC) ships. The ships have same principal dimension such as length, beam, and draught. The turning circle characteristics of the VLCC ships are simulated at 35 degree of rudder angle. In the analysis, firstly, turning circle performance of U-type VLCC ship is simulated. In the simulation, initial ship speed is determined using given power and rpm. Hydrodynamic derivatives coefficients are determined by including effect of fullness of aft run. Using the obtained, speed and hydrodynamic coefficients, force and moment acting on hull, force and moment induced by propeller, force and moment induced by rudder are determined. Finally, ship trajectory, ratio of speed, yaw angle and drift angle are determined. Results of simulation results of the VLCC ship are compared with the experimental one as validation. Using the same method, V-type VLCC is simulated and the simulation results are compared with U-type VLCC ship. Results shows the turning circle of U-type is larger than V-type due to effect stern hul results of simulation are.

Thermal Evaluation of a KRI-BGM Shipping Cask

International Nuclear Information System (INIS)

Bang, K. S.; Lee, J. C.; Seo, K. S.

2007-01-01

Radioactive isotopes are used extensively in the fields of industry, medical treatment, food and agriculture. Use of radioactive isotopes is expected to increase continuously with the growth of each field. In order to safely transport radioactive isotopes from the place of manufacture to the place of use, a shipping package is required. Therefore KAERI is developing the KRI-BGM shipping cask to transport the Ir-192 bulk radioactive material, which is produced at the HANARO research reactor. The shipping package should satisfy the requirements which are prescribed in the Korea MOST Act 2001-23, IAEA Safety Standard Series No. TS-R-1, US 10 CFR Part 71 and the US 49 CFR Part 173. These regulatory classify the KRI-BGM shipping cask as a Type B package, and their regulatory guidelines state that the Type B package for transporting radioactive materials should be able to withstand a period of 30 minutes under a thermal condition of 800 .deg. C. However, the polyurethane, which is to be used as the filling within the cavity of the KRIBGM shipping cask, has a very weak characteristic in a high temperature. Therefore it is difficult for the depleted uranium(hereafter DU), which is used as shielding material, to be protected under a thermal condition of 800 .deg. C. Accordingly, the KRI-BGM shipping cask, which applied non-combustible polyurethane and fireproof materials as the filling, was fabricated. The thermal tests by using prototype cask have been performed to estimate the thermal integrity of the KRI-BGM shipping cask under a thermal condition of 800 .deg. C

SYNCHRONIZATION OF NATIONAL GRID NETWORK WITH THE ELECTRICITY SHIPS NETWORK IN THE "SHORE TO SHIP" SYSTEM

Directory of Open Access Journals (Sweden)

Dariusz TARNAPOWICZ

2013-07-01

Full Text Available ‘Shore to ship’ system – ships’ power supply from the local electrical substations – is one of the effective ways to limit the negative impact of the ships lying in ports on the environment. Energy infrastructure of the port installation necessary to provide ships with power supply has to be designed so that different types of ships can use it. The important issue concerning ‘shore to ship’ system is the quality of power supply. This can be achieved via sustaining continuity of power supply while switching from the ships’ electrical network over to the national grid. In this article the author presents the way of synchronizing the national grid with the ships’ electrical network during ship’s lying in port. Such synchronization would allow for uninterruptible work of the ship’s electrical devices.

Full-scale tests of spent-nuclear-fuel shipping systems

International Nuclear Information System (INIS)

Yoshimura, H.R.; Huerta, M.

1976-01-01

Sandia Laboratories will be conducting, for the U.S. Energy Research and Development Administration, a series of tests involving spent-nuclear-fuel shipping systems. Large shipping casks in the 20500 to 70000-kg range will be included in the following full-scale tests: (1) Runaway tractor-trailer crash into a solid concrete barrier while carrying a shipping cask. (2) High-speed locomotive grade-crossing impact with a truck carrying a shipping cask. (3) High-speed derailment, collision, and fire involving a special railcar and shipping cask. The hardware and testing procedures for each of the tests are described. The analysis conducted in advance of the tests addresses the modelling technique used and a description of the scale-model tests. Analytical modelling being done before running the full-scale tests is also described. (author)

Fuel exchanging machine for a nuclear ship

International Nuclear Information System (INIS)

Hayashi, Tetsuji.

1984-01-01

Purpose: To prevent atmospheric contaminations upon fuel exchange thereby keep the environmental circumstance clean in the periphery of the nuclear ship. Constitution: A nuclear reactor container is disposed to the inside of a containing vessel in the ship body and a shutter is mounted to the upper opening of the ship body. Further, a landing container having a bottom opening equipped with shutter for alingning the upper opening equipped with shuuter of the ship is elevatably suspended to the trolley of a crane by way of a wire rope and a winch, and a fuel exchange cask is elevatably disposed to the inside of the landing container. Further, airs in the inside of the container is adapted to be discharged externally through a filter by means of a blower and the inside is kept at a negative pressure. Thus, since the containing vessel is covered with the landing container upon fuel exchanging operation, atmospheric contamination can be prevented sufficiently. (Sekiya, K.)

Towards seasonal Arctic shipping route predictions

Science.gov (United States)

Haines, K.; Melia, N.; Hawkins, E.; Day, J. J.

2017-12-01

In our previous work [1] we showed how trans-Arctic shipping routes would become more available through the 21st century as sea ice declines, using CMIP5 models with means and stds calibrated to PIOMAS sea ice observations. Sea ice will continue to close shipping routes to open water vessels through the winter months for the foreseeable future so the availability of open sea routes will vary greatly from year to year. Here [2] we look at whether the trans-Arctic shipping season period can be predicted in seasonal forecasts, again using several climate models, and testing both perfect and imperfect knowledge of the initial sea ice conditions. We find skilful predictions of the upcoming summer shipping season can be made from as early as January, although typically forecasts may show lower skill before a May `predictability barrier'. Focussing on the northern sea route (NSR) off Siberia, the date of opening of this sea route is twice as variable as the closing date, and this carries through to reduced predictability at the start of the season. Under climate change the later freeze-up date accounts for 60% of the lengthening season, Fig1 We find that predictive skill is state dependent with predictions for high or low ice years exhibiting greater skill than for average ice years. Forecasting the exact timing of route open periods is harder (more weather dependent) under average ice conditions while in high and low ice years the season is more controlled by the initial ice conditions from spring onwards. This could be very useful information for companies planning vessel routing for the coming season. We tested this dependence on the initial ice conditions by changing the initial ice state towards climatologically average conditions and show directly that early summer sea-ice thickness information is crucial to obtain skilful forecasts of the coming shipping season. Mechanisms for this are discussed. This strongly suggests that good sea ice thickness observations

49 CFR 172.202 - Description of hazardous material on shipping papers.

Science.gov (United States)

2010-10-01

... papers. 172.202 Section 172.202 Transportation Other Regulations Relating to Transportation PIPELINE AND... INFORMATION, TRAINING REQUIREMENTS, AND SECURITY PLANS Shipping Papers § 172.202 Description of hazardous material on shipping papers. (a) The shipping description of a hazardous material on the shipping paper...

Conceptual design of inherently safe integral reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, J. I.; Chang, M. H.; Lee, D. J. and others

1999-03-01

The design concept of a 300 MWt inherently safe integral reactor(ISIR) for the propulsion of extra large and superhigh speed container ship was developed in this report. The scope and contents of this report are as follows : 1. The state of the art of the technology for ship-mounted reactor 2. Design requirements for ISIR 3. Fuel and core design 4. Conceptual design of fluid system 5. Conceptual design of reactor vessel assembly and primary components 6. Performance analyses and safety analyses. Installation of two ISIRs with total thermal power of 600MWt and efficiency of 21% is capable of generating shaft power of 126,000kW which is sufficient to power a container ship of 8,000TEU with 30knot cruise speed. Larger and speedier ship can be considered by installing 4 ISIRs. Even though the ISIR was developed for ship propulsion, it can be used also for a multi-purpose nuclear power plant for electricity generation, local heating, or seawater desalination by mounting on a movable floating barge. (author)

47 CFR 80.277 - Ship Security Alert System (SSAS).

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Ship Security Alert System (SSAS). 80.277... Security Alert System (SSAS). (a) Vessels equipped with a Ship Security Alert System pursuant to the Safety..., “RTCM Standard 11020.0—Ship Security Alert Systems (SSAS) using the Cospas-Sarsat System,” Version 1.0...

Swan Queen, shipping, and boundary regulation in fandom

Directory of Open Access Journals (Sweden)

Victoria M. Gonzalez

2016-09-01

Full Text Available There are a number of fan activities and practices that are subject to regulation. The mechanisms of regulation in shipping, however, are not always clear. Shipping, the fan activity of romantically pairing two fictional characters, has become a popular and contentious facet of fan interaction. The case that will be examined in this article is that of the Swan Queen ship, which pairs two female characters from Once Upon a Time (2011–. The lengths that fans have gone to support and promote this ship led to rather intense discussion and infighting among members of the Once Upon a Time fandom. I utilize comments and posts made on Tumblr to examine the mechanisms that dictate inclusion and exclusion in shipper communities. In doing so, I hope to identify the kinds of shipper activities that are subject to regulation and the kinds of boundaries that this regulation establishes. Shipping is dictated not only by fans' imaginations but also by boundaries that are performed and regulated on digital forums.

Decommissioning plan of the nuclear-powered ship 'Mutsu'

International Nuclear Information System (INIS)

1992-01-01

The nuclear-powered ship 'Mutsu' is to be decommissioned at Sekinehama Port immediately after finishing the experimental voyage based on the 'Fundamental plan on the research required for the development of nuclear ships in Japan Atomic Energy Research Institute' decided in March, 1985. The decommissioning plan which determines the methods of the works regarding the decommissioning and others is as follows. In order to utilize the ship hull of Mutsu, the reactor room including the reactor and shielding is removed in a lump, and the removal and isolation method of preserving it as it is on land is adopted. The measures for environment preservation and ensuring the safety of residents are taken, and the sufficient work control is carried out for preventing accidents and reducing the radiation exposure of workers. The ship is used as the ship with ordinary propulsion system for ocean research and the research and development of marine reactors. The utilization of Sekinehama and Ominato facilities is investigated. The reactor room removed from Mutsu is exhibited to public, being preserved safely in a building. (K.I.)

Prevention of Polluting Rivers and Lakes from Ships

Directory of Open Access Journals (Sweden)

Natalija Jolić

2005-09-01

Full Text Available Traffic on rivers and lakes in Europe has been ve1y well developed.The reason for this is the transport cost, relative speedand good connectivity of major European cities by rivers andcanals. In Croatia, this transport mode is lagging behind therest of Europe. Croatia is located at an interesting section of theriver transversal, but due to several reasons, river navigation inCroatia has not been developed to any major extent. As operatingriver ships the most frequent types are: towboats, pushboatsand self-propelled ships. The installed diesel engines, propulsionand auxiliary engines run at high power. Proportional tothe increase in the power of installed engines is also the increasein the volume of waste produced by the engines. Also, the olderthe engine, the greater volume of waste it produces. Ships mayalso cause pollution by wastewaters and garbage. This pollutionthreat grows with the greater number of people on boardand the age of the ship. In order to minimize these possibilitiesof pollution, it is necesswy to control all the time the properfunctioning of the ships, train the staff and construct receptionfacilities on land.

Ergonomical valorization of working spaces in multipurpose ships.

Science.gov (United States)

Seif, Mehdi; Degiuli, Nastija; Muftić, Osman

2003-06-01

In this work it is shown how anthropological data are among the most needed factors in ergonomical valorization of crew working spaces. Ship's working or living environment involves many unique human factors, which should be specially considered in our case as limitation of crew space. In this work we have chosen ships of different years of construction to prove this tendency. As a micro study, the work posture analysis using the pulling force experiment is performed in order to determine lumbar moment, intra-abdominal pressure as a measure of evaluating and comparing different crew work positions. As a macro-study, the "crew work posture analysis" was carried out by the use of the data collected from real cases. The most probable work postures in different spaces of a ship are classified and after some corrections of the work place the profile and its grade were determined. The "statistical analysis for real ship's spaces" is also performed, as well as another macro study, in order to show some real designed ship spaces from the point of view of the allocated volume.

The mechanics of ship impacts against bridges

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Zhang, Shengming

1998-01-01

a glancing blow between the ship and the bridge structure. This model is based on rigid body mechanics and well suited for inclusion in a probabilistic analysis procedure. Finally, some empirical expressions are presented which relate the energy absorbed by crushing of ship structures to the maximum impact...

Underactuated ship tracking control : theory and experiments

NARCIS (Netherlands)

Pettersen, K.Y.; Nijmeijer, H.

2001-01-01

We consider complete state tracking feedback control of a ship having two controls, namely surge force and yaw moment. The ship model has similarities with chained form systems but cannot directly be transformed in chained form. In particular, the model has a drift vector field as opposed to the

Cytological-cytogenetic analyses of winter flounder embryos collected from the Benthos at the barge North Cape oil spill

Energy Technology Data Exchange (ETDEWEB)

Hughes, J B [Milford Laboratory, CT (United States). Northeast Fisheries Science Center

1999-01-01

The oil barge North Cape ran aground on Moonstone Beach in Rhode Island on January 19, 1996, spilling 828 000 gallons (US) of a combination of diesel and home heating oils. Samples of winter flounder embryos were collected from salt ponds in the area of the spill using an epibenthic sled. An examination of the field-sampled embryos based on gross morphology, levels of moribund embryos, mitotic index, and chromosomal anomalies found that a significant number exhibited high levels of one or more of these conditions when compared with flounder embryos raised under laboratory-controlled conditions. No chorion damage was noted in embryos collected from the field nor were there any significant findings of lordosis or scoliosis. The cumulative impact on winter flounder embryos of North Cape oil exposure was an estimated 51% reduction in the number of embryos surviving to the larval stage. (author)

Investigation into the feasibility of alternative plutonium shipping forms

International Nuclear Information System (INIS)

Mishima, J.; Lindsey, C.G.

1983-06-01

Pacific Northwest Laboratory (PNL), operated for the Department of Energy by the Battelle Memorial Institute, is conducting a study for the Nuclear Regulatory Commission on the feasibility of altering current plutonium shipping forms to reduce or eliminate the airborne dispersibility of PuO 2 which might occur during a shipping accident. Plutonium used for fuel fabrication is currently shipped as a PuO 2 powder with a significant fraction in the respirable size range. If the high-strength container is breached due to stresses imposed during a transportation accident, the PuO 2 powder could be subject to airborne dispersion. The available information indicated that a potential accident involving fire accompanied by crush/impact forces would lead to failure of current surface shipping containers (no assumptions were made on the possibility of such a severe accident). Criteria were defined for an alternate shipping form to mitigate the effects of such an accident. Candidate techniques and materials were evaluated as alternate shipping forms by a task team consisting of personnel from PNL and Rockwell Hanford Operations (RHO). At this time, the most promising candidate for an alternate plutonium shipping form appears to be pressing PuO 2 into unsintered (green) pellets. These green pellets satisfy the criteria for a less dispersible form without requiring significant process changes. Discussions of all candidates considered are contained in a series of appendices. Recommendations for further investigations of the applicability of green pellets as an alternate shipping form are given, including the need for a cost-benefit study

Experimental studies on particle emissions from cruising ship, their characteristic properties, transformation and atmospheric lifetime in the marine boundary layer

Science.gov (United States)

Petzold, A.; Hasselbach, J.; Lauer, P.; Baumann, R.; Franke, K.; Gurk, C.; Schlager, H.; Weingartner, E.

2008-05-01

Particle emissions from ship engines and their atmospheric transformation in the marine boundary layer (MBL) were investigated in engine test bed studies and in airborne measurements of expanding ship plumes. During the test rig studies, detailed aerosol microphysical and chemical properties were measured in the exhaust gas of a serial MAN B&W seven-cylinder four-stroke marine diesel engine under various load conditions. The emission studies were complemented by airborne aerosol transformation studies in the plume of a large container ship in the English Channel using the DLR aircraft Falcon 20 E-5. Observations from emission studies and plume studies combined with a Gaussian plume dispersion model yield a consistent picture of particle transformation processes from emission to atmospheric processing during plume expansion. Particulate matter emission indices obtained from plume measurements are 8.8±1.0×1015(kg fuel)-1 by number for non-volatile particles and 174±43 mg (kg fuel)-1 by mass for Black Carbon (BC). Values determined for test rig conditions between 85 and 110% engine load are of similar magnitude. For the total particle number including volatile compounds no emission index can be derived since the volatile aerosol fraction is subject to rapid transformation processes in the plume. Ship exhaust particles occur in the size range Dp<0.3 μm, showing a bi-modal structure. The combustion particle mode is centred at modal diameters of 0.05 μm for raw emissions to 0.10 μm at a plume age of 1 h. The smaller-sized volatile particle mode is centred at Dp≤0.02 μm. From the decay of ship exhaust particle number concentrations in an expanding plume, a maximum plume life time of approx. 24 h is estimated for a well-mixed marine boundary layer.

Fiscal 1978 annual report of Japan Nuclear Ship Development Agency

International Nuclear Information System (INIS)

1979-01-01

In October, 1978, the nuclear ship Mutsu was moved to Sasebo Port from Ominato Port for shield repair and comprehensive safety check-up and repair; and this was a long-standing problem for the ship. In face of a new energy age, Japan Nuclear Ship Development Agency is endeavoring to bring up the nuclear ship technology in Japan to the top level in the world by successfully completing the n.s. Mutsu through perfect safety and reliability. For Japan, which is a leading country of shipbuilding and merchant shipping, the development of nuclear ships is extremely important. On the activities of the agency from April, 1978, to March, 1979, the following matters are described: safety check and shielding repair of the n.s. Mutsu; Maintenance of the n.s. Mutsu at Ominato and Sasebo ports and its sailing to Sasebo port; works at Sasebo port before and after the arrival of the n.s. Mutsu; maintenance works of the Mutsu facilities at Ominato port; governmental formalities for permission and approval; training of ship crew; administrative works. (J.P.N.)

Port entry of nuclear ships differences, procedures and conditions

International Nuclear Information System (INIS)

McMichael, D.; Bianchi, H.

1978-01-01

There are about 250 nuclear propelled ships, only 2 of them are merchant ships: the US freighter Savannah and the bulk carrier Otto Hahn of the Federal Republic of Germany. This paper is restricted to the experience with both of these ships, showing partly similar and partly different procedures for port entry. They have called at 107 ports in 40 countries. The Savannah was operated in the periods from 1962 - 1971 and the Otto Hahn is still in operation. The endeavours of the OECD and IMCO to review and to harmonize international rules for nuclear merchant ships should be supported and continued

47 CFR 80.79 - Inspection of ship station by a foreign Government.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Inspection of ship station by a foreign... Requirements-Ship Stations § 80.79 Inspection of ship station by a foreign Government. The Governments or appropriate administrations of countries which a ship visits may require the license of the ship station or...

Monitoring shipping emissions in the German Bight using MAX-DOAS measurements

Science.gov (United States)

Seyler, André; Wittrock, Folkard; Kattner, Lisa; Mathieu-Üffing, Barbara; Peters, Enno; Richter, Andreas; Schmolke, Stefan; Burrows, John P.

2017-04-01

Shipping is generally the most energy efficient transportation mode, but, at the same time, it accounts for four fifths of the worldwide total merchandise trade volume. As a result, shipping contributes a significant part to the emissions from the transportation sector. The majority of shipping emissions occurs within 400 km of land, impacting on air pollution in coastal areas and harbor towns. The North Sea has one of the highest ship densities in the world and the vast majority of ships heading for the port of Hamburg sail through the German Bight and into the river Elbe. A three-year time series of ground-based MAX-DOAS measurements of NO2 and SO2 on the island Neuwerk in the German Bight has been analyzed for contributions from shipping emissions. Measurements of individual ship plumes as well as of background pollution are possible from this location, which is 6-7 kilometers away from the main shipping lane towards the harbor of Hamburg. More than 2000 individual ship plumes have been identified in the data and analyzed for the emission ratio of SO2 to NO2, yielding an average ratio of 0.3 for the years 2013/2014. Contributions of ships and land-based sources to air pollution levels in the German Bight have been estimated, showing that despite the vicinity to the shipping lane, the contribution of shipping sources to air pollution is only about 40%. Since January 2015, much lower fuel sulfur content limits of 0.1% (before: 1.0%) apply in the North and Baltic Sea Emission Control Area (ECA). Comparing MAX-DOAS measurements from 2015/2016 (new regulation) to 2013/2014 (old regulation), a large reduction in SO2/NO2 ratios in shipping emissions and a significant reduction (by a factor of eight) in ambient coastal SO2 levels have been observed. In addition to that, selected shipping emission measurements from other measurement sites and campaigns are presented. This study is part of the project MeSMarT (Measurements of Shipping emissions in the Marine Troposphere

Structural analysis of a ship on global aspect using ANSYS

Science.gov (United States)

Rahman, M. Muzibur; Kamol, Rajia Sultana; Islam, Reyana

2017-12-01

Ship is a complex geometry which undergoes a combination of loadings such as hydrostatic, hydrodynamic, wind, wave etc. at sea and thus adequate strength in a ship has always been one of the most challenging tasks for the ship designers. International Maritime Organization (IMO) and classification societies are providing the standards to ensure the adequacy of strength for the ship against all demands throughout its service life. Thus, structural analysis is needed to assess the overall strength of hull, and the means in this regard are based on finite element method which may be applied either local or global aspect of the ship. This paper is an attempt to carry out the structural analysis of a ship in global aspect using ANSYS software to locate the most stress concentration and deformed area, which will have ultimate effect on fatigue fracture.

Compliance Monitoring of Underwater Blasting for Rock Removal at Warrior Point, Columbia River Channel Improvement Project, 2009/2010

Energy Technology Data Exchange (ETDEWEB)

Carlson, Thomas J.; Johnson, Gary E.; Woodley, Christa M.; Skalski, J. R.; Seaburg, Adam

2011-05-10

The U.S. Army Corps of Engineers, Portland District (USACE) conducted the 20-year Columbia River Channel Improvement Project (CRCIP) to deepen the navigation channel between Portland, Oregon, and the Pacific Ocean to allow transit of fully loaded Panamax ships (100 ft wide, 600 to 700 ft long, and draft 45 to 50 ft). In the vicinity of Warrior Point, between river miles (RM) 87 and 88 near St. Helens, Oregon, the USACE conducted underwater blasting and dredging to remove 300,000 yd3 of a basalt rock formation to reach a depth of 44 ft in the Columbia River navigation channel. The purpose of this report is to document methods and results of the compliance monitoring study for the blasting project at Warrior Point in the Columbia River.

Virtual Ship Architecture Description Document Issue 1.00

National Research Council Canada - National Science Library

Best, John

2000-01-01

The Virtual Ship concept calls for simulation models of systems to be brought together to create a virtual representation of a warship, in a process analogous to the construction of a physical ship...

Size-resolved particle emission factors for individual ships

Science.gov (United States)

Jonsson, Åsa M.; Westerlund, Jonathan; Hallquist, Mattias

2011-07-01

In these experiments size-resolved emission factors for particle number (EFPN) and mass (EFPM) have been determined for 734 individual ship passages for real-world dilution. The method used is an extractive sampling method of the passing ship plumes where particle number/mass and CO2 were measured with high time resolution (1 Hz). The measurements were conducted on a small island located in the entrance to the port of Gothenburg (N57.6849, E11.838), the largest harbor in Scandinavia. This is an emission control area (ECA) and in close vicinity to populated areas. The average EFPN and EFPM were 2.55 ± 0.11 × 1016 (kg fuel)-1 and 2050 ± 110 mg (kg fuel)-1, respectively. The determined EF for ships with multiple passages showed a great reproducibility. Size-resolved EFPN were peaking at small particle sizes ˜35 nm. Smaller particle sizes and hence less mass were observed by a gas turbine equipped ship compared to diesel engine equipped ships. On average 36 to 46% of the emitted particles by number were non-volatile and 24% by mass (EFPN 1.16 ± 0.19 × 1016 [kg fuel]-1 and EFPM 488 ± 73 mg [kg fuel]-1, respectively). This study shows a great potential to gain large data-sets regarding ship emission determining parameters that can improve current dispersion modeling for health assessments on local and regional scales. The global contributions of total and non-volatile particle mass from shipping using this extensive data-set from an ECA were estimated to be at least 0.80 Tgy-1 and 0.19 Tgy-1.

Computerized waste-accountability shipping and packaging system