WorldWideScience

Sample records for shields high school

  1. Highly heat removing radiation shielding material

    Asano, Norio; Hozumi, Masahiro.

    1990-01-01

    Organic materials, inorganic materials or metals having excellent radiation shielding performance are impregnated into expanded metal materials, such as Al, Cu or Mg, having high heat conductivity. Further, the porosity of the expanded metals and combination of the expanded metals and the materials to be impregnated are changed depending on the purpose. Further, a plurality of shielding materials are impregnated into the expanded metal of the same kind, to constitute shielding materials. In such shielding materials, impregnated materials provide shielding performance against radiation rays such as neutrons and gamma rays, the expanded metals provide heat removing performance respectively and they act as shielding materials having heat removing performance as a whole. Accordingly, problems of non-informity and discontinuity in the prior art can be dissolved be provide materials having flexibility in view of fabrication work. (T.M.)

  2. Shielding technology for high energy radiation production facility

    Lee, Byung Chul; Kim, Heon Il

    2004-06-01

    In order to develop shielding technology for high energy radiation production facility, references and data for high energy neutron shielding are searched and collected, and calculations to obtain the characteristics of neutron shield materials are performed. For the evaluation of characteristics of neutron shield material, it is chosen not only general shield materials such as concrete, polyethylene, etc., but also KAERI developed neutron shields of High Density PolyEthylene (HDPE) mixed with boron compound (B 2 O 3 , H 2 BO 3 , Borax). Neutron attenuation coefficients for these materials are obtained for later use in shielding design. The effect of source shape and source angular distribution on the shielding characteristics for several shield materials is examined. This effect can contribute to create shielding concept in case of no detail source information. It is also evaluated the effect of the arrangement of shield materials using current shield materials. With these results, conceptual shielding design for PET cyclotron is performed. The shielding composite using HDPE and concrete is selected to meet the target dose rate outside the composite, and the dose evaluation is performed by configuring the facility room conceptually. From the result, the proper shield configuration for this PET cyclotron is proposed

  3. Highly Efficient and Reliable Transparent Electromagnetic Interference Shielding Film.

    Jia, Li-Chuan; Yan, Ding-Xiang; Liu, Xiaofeng; Ma, Rujun; Wu, Hong-Yuan; Li, Zhong-Ming

    2018-04-11

    Electromagnetic protection in optoelectronic instruments such as optical windows and electronic displays is challenging because of the essential requirements of a high optical transmittance and an electromagnetic interference (EMI) shielding effectiveness (SE). Herein, we demonstrate the creation of an efficient transparent EMI shielding film that is composed of calcium alginate (CA), silver nanowires (AgNWs), and polyurethane (PU), via a facile and low-cost Mayer-rod coating method. The CA/AgNW/PU film with a high optical transmittance of 92% achieves an EMI SE of 20.7 dB, which meets the requirements for commercial shielding applications. A superior EMI SE of 31.3 dB could be achieved, whereas the transparent film still maintains a transmittance of 81%. The integrated efficient EMI SE and high transmittance are superior to those of most previously reported transparent EMI shielding materials. Moreover, our transparent films exhibit a highly reliable shielding ability in a complex service environment, with 98 and 96% EMI SE retentions even after 30 min of ultrasound treatment and 5000 bending cycles (1.5 mm radius), respectively. The comprehensive performance that is associated with the facile fabrication strategy imparts the CA/AgNW/PU film with great potential as an optimized EMI shielding material in emerging optoelectronic devices, such as flexible solar cells, displays, and touch panels.

  4. Development of highly effective neutron shields and neutron absorbing materials

    Tsuda, K.; Matsuda, F.; Taniuchi, H.; Yuhara, T.; Iida, T.

    1993-01-01

    A wide range of materials, including polymers and hydrogen-occluded alloys that might be usable as the neutron shielding material were examined. And a wide range of materials, including aluminum alloys that might be usable as the neutron-absorbing material were examined. After screening, the candidate material was determined on the basis of evaluation regarding its adaptabilities as a high-performance neutron-shielding and neutron-absorbing material. This candidate material was manufactured for trial, after which material properties tests, neutron-shielding tests and neutron-absorbing tests were carried out on it. The specifications of this material were thus determined. This research has resulted in materials of good performance; a neutron-shielding material based on ethylene propylene rubber and titanium hydride, and a neutron-absorbing material based on aluminum and titanium hydride. (author)

  5. Simplified shielding calculation system for high-intensity proton accelerators

    Masumura, Tomomi; Nakashima, Hiroshi; Nakane, Yoshihiro; Sasamoto, Nobuo [Center for Neutron Science, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan)

    2000-06-01

    A simplified shielding calculation system is developed for applying conceptual shielding design of facilities in the joint project for high-intensity proton accelerators. The system is composed of neutron transmission calculation part for bulk shielding using simplified formulas: Moyer model and Tesch's formula, and neutron skyshine calculation part using an empirical formula: Stapleton's formula. The system is made with the Microsoft Excel software for user's convenience. This report provides a manual for the system as well as calculation conditions used in the calculation such as Moyer model's parameters. In this report preliminary results based on data at December 8, 1999, are also shown as an example. (author)

  6. Practical aspects of shielding high-energy particle accelerators

    Thomas, R.H.; Univ. of California, Berkeley, CA

    1993-09-01

    The experimental basis of shielding design for high-energy accelerators that has been established over the past thirty years is described. Particular emphasis is given to the design of large accelerators constructed underground. The first data obtained from cosmic-ray physics were supplemented by basic nuclear physics. When these data proved insufficient, experiments were carried out and interpreted by several empirical formulae -- the most successful of which has been the Moyer Model. This empirical model has been used successfully to design the shields of most synchrotrons currently in operation, and is still being used in preliminary design and to check the results of neutron transport calculations. Accurate shield designs are needed to reduce external radiation levels during accelerator operations and to minimize environmental impacts such as open-quotes skyshineclose quotes and the production of radioactivity in groundwater. Examples of the cost of minimizing such environmental impacts are given

  7. Computational methods for high-energy source shielding

    Armstrong, T.W.; Cloth, P.; Filges, D.

    1983-01-01

    The computational methods for high-energy radiation transport related to shielding of the SNQ-spallation source are outlined. The basic approach is to couple radiation-transport computer codes which use Monte Carlo methods and discrete ordinates methods. A code system is suggested that incorporates state-of-the-art radiation-transport techniques. The stepwise verification of that system is briefly summarized. The complexity of the resulting code system suggests a more straightforward code specially tailored for thick shield calculations. A short guide line to future development of such a Monte Carlo code is given

  8. Shielding for high energy, high intensity electron accelerator installation

    Warawas, C.; Chongkum, S.

    1997-03-01

    The utilization of electron accelerators (eBA) is gradually increased in Thailand. For instance, a 30-40 MeV eBA are used for tumor and cancer therapy in the hospitals, and a high current eBA in for gemstone colonization. In the near future, an application of eBA in industries will be grown up in a few directions, e.g., flue gases treatment from the coal fire-power plants, plastic processing, rubber vulcanization and food preservation. It is the major roles of Office of Atomic Energy for Peace (OAEP) to promote the peaceful uses of nuclear energy and to regulate the public safety and protection of the environment. By taking into account of radiation safety aspect, high energy electrons are not only harmful to human bodies, but the radioactive nuclides can be occurred. This report presents a literature review by following the National Committee on Radiation Protection and Measurements (NCRP) report No.31. This reviews for parametric calculation and shielding design of the high energy (up to 100 MeV), high intensity electron accelerator installation

  9. Non-combustible nuclear radiation shields with high hydrogen content

    Hall, W.C.; Peterson, J.M.

    1978-01-01

    The invention relates to compositions, methods of production, and uses of non-combustible nuclear radiation shields, with particular emphasis on those containing a high concentration of hydrogen atoms, especially effective for moderating neutron energy by elastic scatter, dispersed as a discontinuous phase in a continuous phase of a fire resistant matrix

  10. A detector for use in high energy bremsstrahlung shielding studies

    Wilson, O.J.; Thomson, J.E.M.

    1983-01-01

    The design, development and calibration of a detector based on the principle of the Moxon-Rae detector is discussed. It is ideally suited to the measurement of the energy fluence of photons transmitted through a thick shield which has been irradiated with high energy bremsstrahlung. The detection sensitivity is 10 4 to 10 5 times that of the P2 ion chamber

  11. Neutron shielding properties of a new high-density concrete

    Lorente, A.; Gallego, E.; Vega Carrillo, H.R.; Mendez, R.

    2008-01-01

    The neutron shielding properties of a new high-density concrete (commercially available under the name Hormirad TM , developed in Spain by the company CT-RAD) have been characterized both experimentally and by Monte Carlo calculations. The shielding properties of this concrete against photons were previously studied and the material is being used to build bunkers, mazes and doors in medical accelerator facilities with good overall results. In this work, the objective was to characterize the material behaviour against neutrons, as well as to test alternative mixings including boron compounds in an effort to improve neutron shielding efficiency. With that purpose, Hormirad TM slabs of different thicknesses were exposed to an 241 Am-Be neutron source under controlled conditions in the neutron measurements laboratory of the Nuclear Engineering Department at UPM. The original mix, which includes a high fraction of magnetite, was then modified by adding different proportions of anhydrous borax (Na 2 B 4 O 7 ). In order to have a reference against common concrete used to shield medical accelerator facilities, the same experiment was repeated with ordinary (HA-25) concrete slabs. In parallel to the experiments, Monte Carlo calculations of the experiments were performed with MCNP5. The experimental results agree reasonably well with the Monte Carlo calculations. Therefore, the first and equilibrium tenth-value layers have been determined for the different types of concrete tested. The results show an advantageous behaviour of the Hormirad TM concrete, in terms of neutron attenuation against real thickness of the shielding. Borated concretes seem less practical since they did not show better neutron attenuation with respect to real thickness and their structural properties are worse. The neutron attenuation properties of Hormirad TM for typical neutron spectra in clinical LINAC accelerators rooms have been also characterized by Monte Carlo calculation. (author)

  12. Radiation Attenuation and Stability of ClearView Radiation Shielding TM-A Transparent Liquid High Radiation Shield.

    Bakshi, Jayeesh

    2018-04-01

    Radiation exposure is a limiting factor to work in sensitive environments seen in nuclear power and test reactors, medical isotope production facilities, spent fuel handling, etc. The established choice for high radiation shielding is lead (Pb), which is toxic, heavy, and abidance by RoHS. Concrete, leaded (Pb) bricks are used as construction materials in nuclear facilities, vaults, and hot cells for radioisotope production. Existing transparent shielding such as leaded glass provides minimal shielding attenuation in radiotherapy procedures, which in some cases is not sufficient. To make working in radioactive environments more practicable while resolving the lead (Pb) issue, a transparent, lightweight, liquid, and lead-free high radiation shield-ClearView Radiation Shielding-(Radium Incorporated, 463 Dinwiddie Ave, Waynesboro, VA). was developed. This paper presents the motivation for developing ClearView, characterization of certain aspects of its use and performance, and its specific attenuation testing. Gamma attenuation testing was done using a 1.11 × 10 Bq Co source and ANSI/HPS-N 13.11 standard. Transparency with increasing thickness, time stability of liquid state, measurements of physical properties, and performance in freezing temperatures are reported. This paper also presents a comparison of ClearView with existing radiation shields. Excerpts from LaSalle nuclear power plant are included, giving additional validation. Results demonstrated and strengthened the expected performance of ClearView as a radiation shield. Due to the proprietary nature of the work, some information is withheld.

  13. High ionization radiation field remote visualization device - shielding requirements

    Fernandez, Antonio P. Rodrigues; Omi, Nelson M.; Silveira, Carlos Gaia da; Calvo, Wilson A. Pajero

    2011-01-01

    The high activity sources manipulation hot-cells use special and very thick leaded glass windows. This window provides a single sight of what is being manipulated inside the hot-cell. The use of surveillance cameras would replace the leaded glass window, provide other sights and show more details of the manipulated pieces, using the zoom capacity. Online distant manipulation may be implemented, too. The limitation is their low ionizing radiation resistance. This low resistance also limited the useful time of robots made to explore or even fix problematic nuclear reactor core, industrial gamma irradiators and high radioactive leaks. This work is a part of the development of a high gamma field remote visualization device using commercial surveillance cameras. These cameras are cheap enough to be discarded after the use for some hours of use in an emergency application, some days or some months in routine applications. A radiation shield can be used but it cannot block the camera sight which is the shield weakness. Estimates of the camera and its electronics resistance may be made knowing each component behavior. This knowledge is also used to determine the optical sensor type and the lens material, too. A better approach will be obtained with the commercial cameras working inside a high gamma field, like the one inside of the IPEN Multipurpose Irradiator. The goal of this work is to establish the radiation shielding needed to extend the camera's useful time to hours, days or months, depending on the application needs. (author)

  14. Neutron shielding properties of a borated high-density glass

    Saeed Aly Abdallah

    2017-01-01

    Full Text Available The neutron shielding properties of a borated high density glass system was characterized experimentally. The total removal macroscopic cross-section of fast neutrons, slow neutrons as well as the linear attenuation coefficient of total gamma rays, primary in addition to secondary, were measured experimentally under good geometric condition to characterize the attenuation properties of (75-x B2O3-1Li2O-5MgO-5ZnO-14Na2O-xBaO glassy system. Slabs of different thicknesses from the investigated glass system were exposed to a collimated beam of neutrons emitted from 252Cf and 241Am-Be neutron sources in order to measure the attenuation properties of fast and slow neutrons as well as total gamma rays. Results confirmed that barium borate glass was suitable for practical use in the field of radiation shielding.

  15. Validation of SCALE code package on high performance neutron shields

    Bace, M.; Jecmenica, R.; Smuc, T.

    1999-01-01

    The shielding ability and other properties of new high performance neutron shielding materials from the KRAFTON series have been recently published. A comparison of the published experimental and MCNP results for the two materials of the KRAFTON series, with our own calculations has been done. Two control modules of the SCALE-4.4 code system have been used, one of them based on one dimensional radiation transport analysis (SAS1) and other based on the three dimensional Monte Carlo method (SAS3). The comparison of the calculated neutron dose equivalent rates shows a good agreement between experimental and calculated results for the KRAFTON-N2 material.. Our results indicate that the N2-M-N2 sandwich type is approximately 10% inferior as neutron shield to the KRAFTON-N2 material. All values of neutron dose equivalent obtained by SAS1 are approximately 25% lower in comparison with the SAS3 results, which indicates proportions of discrepancies introduced by one-dimensional geometry approximation.(author)

  16. Soil biological shield exposed to high energy neutrons; Zemlja kao bioloski stit od neutrona visokih energija

    Simovic, R; Marinkovic, N [Institute of nuclear sciences Vinca, Belgrade (Yugoslavia)

    1993-04-15

    Shielding efficiency of soil biological shield exposed to high energy neutrons was investigated. Dose rate equivalents for neutrons, secondary gamma and gamma radiation were computed on the surface of soil slabs having different thicknesses. Yields of primary and secondary nuclear radiation in the total dose were evaluated. Influence of the incident neutron spectrum, water content and chemical composition of the material on its shielding efficiency was examined. It was found that the soil density and the water content determine the quality of biological shield, the influence of other factors being less important. Comparison of shielding efficiencies for soil with sand, brick and ordinary concrete shields was done.

  17. Development and application of high performance liquid shielding materials

    Miura, Toshimasa; Omata, Sadao; Otano, Naoteru; Hirao, Yoshihiro; Kanai, Yasuji

    1998-01-01

    Development of liquid shielding material with good performance for neutron and γ-ray was investigated. Lead, hydrogen and boron were selected as the elements of shielding materials which were made by the ultraviolet curing method. Good performance shielding materials with about 1 mm width to neutron and gamma ray were produced by mixing lead, boron compound and ultraviolet curing monomer with many hydrogens. The shielding performance was the same as a concrete with two times width. The activation was very small such as 1/10 6 -1/10 8 of the standard concrete. The weight and the external appearance did not charged from room temperature to 100degC. Polyfunctional monomer had good thermal resistance. This shielding material was applied to double bending cylindrical duct and annulus ring duct. The results proved the shielding materials developed had good performance. (S.Y.)

  18. Shielding measurements and augmentation for high power operations of FBTR

    Jose, M.T.; Baskar, S.; Viswanathan, S.; Balasundar, S.; Subramanian, V.; Ravi, T.; Sundaram, V.M.; Raghunath, V.M.; Varadarajan, S.; Jena, A.K.

    1996-01-01

    Fast breeder test reactor (FBTR) at Kalpakkam is a 40 MWt loop type fast reactor with sodium coolant. Since criticality in 1985, radiation surveys were carried out at all accessible locations at different power levels to find out the hot spots and evaluate the shielding adequacy. This paper gives the details of findings of these measurements, consequent changes in shielding, and the present status of dose profile after the augmentation of shielding. (author). 1 ref., 1 fig., 1 tab

  19. Study on Basic Characteristics for the Development of Radiation Shielding High-Weight Concrete

    Mun, Young Bum; Lee, Jea Hyung; Choi, Hyun Kook [Sungshin Cement CO., Sejong (Korea, Republic of); Oh, Jeong Hwan; Choi, Soo Seok [Jeju National University, Jeju (Korea, Republic of)

    2016-05-15

    It is planned to build a power plant more than 6 units. Although the demand of a nuclear power plant is going to increase, the attention for radiation shielding is relatively in a low level. Concrete is one of the excellent and widely used shielding materials. Since the radiation shielding of a given material is proportional to density and thickness, a high-weight concrete with high-weight aggregate which is higher than normal concrete is used for radiation shielding. However, there are a few studies and references about radiation shielding concrete. Therefore, it is required to find a high-weight aggregate. The purpose of this paper is the development of a highweight concrete to improve radiation shielding capability. The radiation shielding rate of high-weight concrete is higher than that of reference concrete. It is confirmed that the density of aggregate and the unit weight of concreate is proportional to the radiation shielding rate. In addition, the chemical composition of aggregate has also has an important effect on γ-ray shielding. Therefore, high weight aggregates of higher density are essentially required to improve radiation shielding capability. The compressive strength of a high weight concrete is better than that of reference concrete. Slump and air contents, however, are slightly increased with by-product aggregates.

  20. Radiological Shielding Design for the Neutron High-Resolution Backscattering Spectrometer EMU at the OPAL Reactor

    Ersez Tunay

    2017-01-01

    Full Text Available The shielding for the neutron high-resolution backscattering spectrometer (EMU located at the OPAL reactor (ANSTO was designed using the Monte Carlo code MCNP 5-1.60. The proposed shielding design has produced compact shielding assemblies, such as the neutron pre-monochromator bunker with sliding cylindrical block shields to accommodate a range of neutron take-off angles, and in the experimental area - shielding of neutron focusing guides, choppers, flight tube, backscattering monochromator, and additional shielding elements inside the Scattering Tank. These shielding assemblies meet safety and engineering requirements and cost constraints. The neutron dose rates around the EMU instrument were reduced to < 0.5 µSv/h and the gamma dose rates to a safe working level of ≤ 3 µSv/h.

  1. Radiological Shielding Design for the Neutron High-Resolution Backscattering Spectrometer EMU at the OPAL Reactor

    Ersez, Tunay; Esposto, Fernando; Souza, Nicolas R. de

    2017-09-01

    The shielding for the neutron high-resolution backscattering spectrometer (EMU) located at the OPAL reactor (ANSTO) was designed using the Monte Carlo code MCNP 5-1.60. The proposed shielding design has produced compact shielding assemblies, such as the neutron pre-monochromator bunker with sliding cylindrical block shields to accommodate a range of neutron take-off angles, and in the experimental area - shielding of neutron focusing guides, choppers, flight tube, backscattering monochromator, and additional shielding elements inside the Scattering Tank. These shielding assemblies meet safety and engineering requirements and cost constraints. The neutron dose rates around the EMU instrument were reduced to < 0.5 µSv/h and the gamma dose rates to a safe working level of ≤ 3 µSv/h.

  2. Annotated references on shielding experiment and calculation of high energy particles

    Hirayama, H.; Ban, S.; Nakamura, T.

    1990-12-01

    The literature on shielding experiment and calculation of high energy particles above 20 MeV has been surveyed. The survey covers thirteen journals, from 1965 up to 1989. For each paper, applicable information is listed on type and energy of the projectile, the accelerator used, composition and thickness of the target and shielding materials, shielding geometry, the experimental and calculational methods, and the quantities obtained. The references on shielding experiment and on shielding calculation are accessed through two indices which list the projectile-target and shielding material combination, shielding geometry and the projectile energy range. The literature on neutron, photon and hadron production from thick target bombarded by charged particles has been surveyed mainly from 1984 as a complement of the previous work. (author)

  3. Electromagnetic shielding

    Tzeng, Wen-Shian V.

    1991-01-01

    Electromagnetic interference (EMI) shielding materials are well known in the art in forms such as gaskets, caulking compounds, adhesives, coatings and the like for a variety of EMI shielding purposes. In the past, where high shielding performance is necessary, EMI shielding has tended to use silver particles or silver coated copper particles dispersed in a resin binder. More recently, aluminum core silver coated particles have been used to reduce costs while maintaining good electrical and physical properties. (author). 8 figs

  4. Shielding calculation for treatment rooms of high energy linear accelerator

    Elleithy, M.A.

    2006-01-01

    A review of German Institute of Standardization (DIN) scheme of the shielding calculation and the essential data required has been done for X-rays and electron beam in the energy range from 1 MeV to 50 MeV. Shielding calculation was done for primary and secondary radiations generated during X-ray operation of Linac. In addition, shielding was done against X-rays generated (Bremsstrahlung) by useful electron beams. The calculations also covered the neutrons generated from the interactions of useful X-rays (at energies above 8 MeV) with the surrounding. The present application involved the computation of shielding against the double scattered components of X-rays and neutrons in the maze area and the thickness of the paraffin wax of the room door. A new developed computer program was designed to assist shielding thickness calculations for a new Linac installation or in replacing an existing machine. The program used a combination of published tables and figures in computing the shielding thickness at different locations for all possible radiation situations. The DIN published data of 40 MeV accelerator room was compared with the program calculations. It was found that there is good agreement between both calculations. The developed program improved the accuracy and speed of calculation

  5. Journalism Beyond High School.

    Turner, Sally

    2001-01-01

    Discusses the shift from high school journalism to college journalism for students. Describes the role of the high school journalism advisor in that process. Offers checklists for getting to know a college publication. Outlines ways high school journalism teachers can take advantage of journalism resources available at local colleges and…

  6. Evaluating High School IT

    Thompson, Brett A.

    2004-01-01

    Since its inception in 1997, Cisco's curriculum has entered thousands of high schools across the U.S. and around the world for two reasons: (1) Cisco has a large portion of the computer networking market, and thus has the resources for and interest in developing high school academies; and (2) high school curriculum development teams recognize the…

  7. Early College High Schools

    Dessoff, Alan

    2011-01-01

    For at-risk students who stand little chance of going to college, or even finishing high school, a growing number of districts have found a solution: Give them an early start in college while they still are in high school. The early college high school (ECHS) movement that began with funding from the Bill and Melinda Gates Foundation 10 years ago…

  8. Radiation production and absorption in human spacecraft shielding systems under high charge and energy Galactic Cosmic Rays: Material medium, shielding depth, and byproduct aspects

    Barthel, Joseph; Sarigul-Klijn, Nesrin

    2018-03-01

    Deep space missions such as the planned 2025 mission to asteroids require spacecraft shields to protect electronics and humans from adverse effects caused by the space radiation environment, primarily Galactic Cosmic Rays. This paper first reviews the theory on how these rays of charged particles interact with matter, and then presents a simulation for a 500 day Mars flyby mission using a deterministic based computer code. High density polyethylene and aluminum shielding materials at a solar minimum are considered. Plots of effective dose with varying shield depth, charged particle flux, and dose in silicon and human tissue behind shielding are presented.

  9. Hot-cell shielding system for high power transmission in DUPIC fuel fabrication

    Kim, K.; Lee, J.; Park, J.; Yang, M.; Park, H.

    2000-01-01

    This paper presents a newly designed hot-cell shielding system for use in the development of DUPIC (Direct Use of spent PWR fuel In CANDU reactors) fuel at KAERI (Korea Atomic Energy Research Institute). This hot-cell shielding system that was designed to transmit high power to sintering furnace in-cell from the out-of-cell through a thick cell wall has three subsystems - a steel shield plug with embedded spiral cooling line, stepped copper bus bars, and a shielding lead block. The dose-equivalent rates of the hot-cell shielding system and of the apertures between this system and the hot-cell wall were calculated. Calculated results were compared with the allowable dose limit of the existing hot-cell. Experiments for examining the temperature changes of the shielding system developed during normal furnace operation were also carried out. Finally, gamma-ray radiation survey experiments were conducted by Co-60 source. It is demonstrated that, from both calculated and experimental results, the newly designed hot-cell shielding system meets all the shielding requirements of the existing hot-cell facility, enabling high power transmission to the in-cell sintering furnace. (author)

  10. Investigation of water content in primary upper shield of high temperature engineering test reactor (HTTR)

    Sumita, Junya; Sawa, Kazuhiro; Mogi, Haruyoshi; Itahashi, Shuuji; Kitami, Toshiyuki; Akutu, Youichi; Fuchita, Yasuhiro; Kawaguchi, Toru; Moriya, Masahiro

    1999-09-01

    A primary upper shield of the High Temperature Engineering Test Reactor (HTTR) is composed of concrete (grout) which is packed into iron frames. The main function of the primary upper shield is to attenuate neutron and gamma ray from the core, that leads to satisfy dose equivalent rate limit of operating floor and stand-pipe room. Water content in the concrete is one of the most important things because it strongly affects neutron-shielding ability. Then, we carried out out-of-pile experiments to investigate relationship between temperature and water content in the concrete. Based on the experimental results, a hydrolysis-diffusion model was developed to investigate water release behavior from the concrete. The model showed that water content used for shielding design in the primary upper shield of the HTTR will be maintained if temperature during operating life is under 110degC. (author)

  11. Pre-installation empirical testing of room shielding for high dose rate remote afterloaders

    Klein, E.E.; Grigsby, P.W.; Williamson, J.F.; Meigooni, A.S.

    1993-01-01

    PURPOSE: Many facilities are acquiring high dose rate remote afterloading units. It is economical that these units be placed in existing shielded teletherapy rooms. Scatter-radiation barriers marginally protect uncontrolled areas from a high dose rate source especially in a room that houses a non-dynamic Cobalt-60 unit. In addition the exact thickness and material composition of the barriers are unknown and therefore, a calculation technique may give misleading results. Also, it would be impossible to evaluate an entire wall barrier by taking isolated core samples in order to assist in the calculations. A quick and inexpensive measurement of dose equivalent using a rented high activity 192Ir source evaluates the barriers and locates shielding deficiencies. METHODS AND MATERIALS: We performed transmission calculations for primary and scattered radiation based on National Council on Radiation Protection and Measurements Reports 49 and 51, respectively. We then rented a high activity 21.7 Ci (8.03 x 10(11) Bq) Ir-192 source to assess our existing teletherapy room shielding for adequacy and voids. This source was placed at the proposed location for clinical high dose rate treatment and measurements were performed. RESULTS: No deficiencies were found in controlled areas surrounding the room, but large differences were found between the calculated and measured values. Our survey located a region in the uncontrolled area above the room requiring augmented shielding which was not predicted by the calculations. A canopy shield was designed to potentially augment the shielding in the ceiling direction. CONCLUSION: Pre-installation testing by measurement is an invaluable method for locating shielding deficiencies and avoiding unnecessary enhancement of shielding particularly when there is lack of information of the inherent shielding

  12. Dosimetric perturbations of a lead shield for surface and interstitial high-dose-rate brachytherapy

    Candela-Juan, Cristian; Granero, Domingo; Vijande, Javier; Ballester, Facundo; Perez-Calatayud, Jose; Rivard, Mark J

    2014-01-01

    In surface and interstitial high-dose-rate brachytherapy with either 60 Co, 192 Ir, or 169 Yb sources, some radiosensitive organs near the surface may be exposed to high absorbed doses. This may be reduced by covering the implants with a lead shield on the body surface, which results in dosimetric perturbations. Monte Carlo simulations in Geant4 were performed for the three radionuclides placed at a single dwell position. Four different shield thicknesses (0, 3, 6, and 10 mm) and three different source depths (0, 5, and 10 mm) in water were considered, with the lead shield placed at the phantom surface. Backscatter dose enhancement and transmission data were obtained for the lead shields. Results were corrected to account for a realistic clinical case with multiple dwell positions. The range of the high backscatter dose enhancement in water is 3 mm for 60 Co and 1 mm for both 192 Ir and 169 Yb. Transmission data for 60 Co and 192 Ir are smaller than those reported by Papagiannis et al (2008 Med. Phys. 35 4898–4906) for brachytherapy facility shielding; for 169 Yb, the difference is negligible. In conclusion, the backscatter overdose produced by the lead shield can be avoided by just adding a few millimetres of bolus. Transmission data provided in this work as a function of lead thickness can be used to estimate healthy organ equivalent dose saving. Use of a lead shield is justified. (paper)

  13. High performance inboard shield design for the compact TIBER-II test reactor: Appendix A-2

    El-Guebaly, L.A.; Sviatoslavsky, I.N.

    1987-01-01

    The compactness of the TIBER-II reactor has placed a premium on the design of a high performance inboard shield to protect the inner legs of the toroidal field (TF) coils. The available space for shield is constrained to 48 cm and the use of tungsten is mandatory to protect the magnet against the 1.53 MW/m 2 neutron wall loading. The primary requirement for the shield is to limit the fast neutron fluence to 10 19 n/cm 2 . In an optimization study, the performance of various candidate materials for protecting the magnet was examined. The optimum shield consists of a 40 cm thick W layer, followed by an 8 cm thick H 2 O/LiNO 3 layer. The mechanical design of the shield calls for tungsten blocks within SS stiffened panels. All the coolant channels are vertical with more of them in the front where there is a high heat load. The coolant pressure is 0.2 MPa and the maximum structural surface temperature is 0 C. The effects of the detailed mechanical design of the shield and the assembly gaps between the shield sectors on the damage in the magnet were analyzed and peaking factors of ∼2 were found at the hot spots. 2 refs., 6 figs., 2 tabs

  14. Radiation Build-Up Of High Energy Gamma In Shielding Of High Atomic Number

    Yuliati, Helfi; Akhadi, Mukhlis

    2000-01-01

    Research to observe effect of radiation build-up factor (b) in iron (Fe) and lead (Pb) for high energy gamma shielding from exp.137 Cs (E gamma : 662 keV) and exp.60 Co (E gamma : 1332 keV) sources has been carried out. Research was conducted bt counting of radiation intensity behind shielding with its thickness vary from 1 to 5 times of half value thickness (HVT). NaI (TI) detector which connected to multi channel analyzer (MCA) was used for the counting. Calculation result show that all of b value are near to 1 (b∼1) both for Fe and Pb. Without inserting b in calculation, from the experiment it was obtained HVT value of Fe for high gamma radiation of 662 and 1332 keV were : (12,94 n 0,03) mm and (17,33 n 0,01) mm with their deviation standards were 0,2% and 0,06% respectively. Value of HVT for Pb with the same energy were : (6,31 n 0,03) mm and (11,86 n 0,03) mm with their deviation standars were : 0,48% and 0,25% respectively. HVL concept could be applied directly to estimate shielding thickness of high atomic number of high energy gamma radiation, without inserting correction of radiation build-up factor

  15. Shielding analysis of high level waste water storage facilities using MCNP code

    Yabuta, Naohiro [Mitsubishi Research Inst., Inc., Tokyo (Japan)

    2001-01-01

    The neutron and gamma-ray transport analysis for the facility as a reprocessing facility with large buildings having thick shielding was made. Radiation shielding analysis consists of a deep transmission calculation for the concrete wall and a skyshine calculation for the space out of the buildings. An efficient analysis with a short running time and high accuracy needs a variance reduction technique suitable for all the calculation regions and structures. In this report, the shielding analysis using MCNP and a discrete ordinate transport code is explained and the idea and procedure of decision of variance reduction parameter is completed. (J.P.N.)

  16. Evaluation of some resonance self-shielding procedures employed in high conversion light water reactor design

    Patino, N.E.; Abbate, M.J.; Sbaffoni, M.M.

    1990-01-01

    The procedures employed in the treatment of the resonance shielding effect have been identified as one of the causes of the large discrepancies found in the neutronic calculation of high conversion light water reactors (HCLWRs), indicating the need for a revision of the self-shielding procedures employed. In this work some well known techniques applied in HCLWR self-shielding calculations are evaluated; the study involves the comparison of methods for the generation of group constants, the analysis of the impact of considering some isotopes as infinitely diluted and the evaluation of the usual approximations utilized for the treatment of heterogeneities

  17. Study and application of high-density concrete in radiation-shielding experiment

    Wu Chongming; Ding Dexin; Xiao Xuefu; Wang Shaolin; Lin Xingjun; Shen Yuanyuan

    2008-01-01

    According to the demand for research and construction project, a series of systematic experiments and studies on shielding γ-ray radiation concrete with the density of 4.60 t/m 3 were made in such aspects as mix ratio design, construction technology, uniformly shielding etc. Such issues as uniformity in the construction and compactness were solved. The ray test method for uniformly shielding concrete was presented and some technical steps for this high-density concrete used in the process of test design or construction were summed up. A series of tests and practical applications show that this technology of mix ratio design and construction is feasible. (authors)

  18. Fixing High Schools

    Perkins-Gough, Deborah

    2005-01-01

    Reports from national education organizations in the US indicate the sorry state of high schools in the country that are accused of failing to adequately prepare their graduates for college or for the workforce, highlighting what is a serious problem in light of the troubled state of the US economy. The need to improve high schools is urgent and…

  19. High School Principals and the High School Journalism Program.

    Peterson, Jane W.

    A study asked selected high school principals to respond to statements about the value of high school journalism to the high school student and about the rights and responsibilities of the high school journalist. These responses were then checked against such information as whether or not the high school principal had worked on a high school…

  20. Remote sampling and analysis of highly radioactive samples in shielded boxes

    Kirpikov, D.A.; Miroshnichenko, I.V.; Pykhteev, O.Yu.

    2010-01-01

    The sampling procedure used for highly radioactive coolant water is associated with high risk of personnel irradiation and uncontrolled radioactive contamination. Remote sample manipulation with provision for proper radiation shielding is intended for safety enhancement of the sampling procedure. The sampling lines are located in an isolated compartment, a shielded box. Various equipment which enables remote or automatic sample manipulation is used for this purpose. The main issues of development of the shielded box equipment intended for a wider ranger of remote chemical analyses and manipulation techniques for highly radioactive water samples are considered in the paper. There were three principal directions of work: Transfer of chemical analysis performed in the laboratory inside the shielded box; Prevalence of computer-aided and remote techniques of highly radioactive sample manipulation inside the shielded box; and, Increase in control over sampling and determination of thermal-hydraulic parameters of the coolant water in the sampling lines. The developed equipment and solutions enable remote chemical analysis in the restricted volume of the shielded box by using ion-chromatographic, amperometrical, fluorimetric, flow injection, phototurbidimetric, conductometric and potentiometric methods. Extent of control performed in the shielded box is determined taking into account the requirements of the regulatory documents as well as feasibility and cost of the technical adaptation of various methods to the shielded box conditions. The work resulted in highly precise determination of more than 15 indexes of the coolant water quality performed in on-line mode in the shielded box. It averages to 80% of the total extent of control performed at the prototype reactor plants. The novel solutions for highly radioactive sample handling are implemented in the shielded box (for example, packaging, sample transportation to the laboratory, volume measurement). The shielded box is

  1. Quality control in high thickness concrete walls for shielding

    Arcama, J.A.; San Pedro, Marcelo; Cannistracci, C.A.

    1983-01-01

    After evaluating different methods of non-destructive testing, of fast execution and quick results, with low operative cost, and suitable to verify the homogeneity and the shielding power of the walls of process cells for radiochemical use, under construction in the Centro Atomico Ezeiza, it was decided to employ the ultrasound method over the whole surface to be examined, with subsequent verification of the results on isolated zones by means of radiometry and gammagraphy. This procedure proved to be satisfactory. The cell's characteristics, the tests performed and their results, which were statistically evaluated by means of a computer program, implemented to his effect, are described. (C.A.K.) [es

  2. High field septum magnet using a superconducting shield for the Future Circular Collider

    Dániel Barna

    2017-04-01

    Full Text Available A zero-field cooled superconducting shield is proposed to realize a high-field (3–4 T septum magnet for the Future Circular Collider hadron-hadron (FCC-hh ring. Three planned prototypes using different materials and technical solutions are presented, which will be used to evaluate the feasibility of this idea as a part of the FCC study. The numerical simulation methods are described to calculate the field patterns around such a shield. A specific excitation current configuration is presented that maintains a fairly homogeneous field outside of a rectangular shield in a wide range of field levels from 0 to 3 Tesla. It is shown that a massless septum configuration (with an opening in the shield is also possible and gives satisfactory field quality with realistic superconducting material properties.

  3. Highly ductile UV-shielding polymer composites with boron nitride nanospheres as fillers.

    Fu, Yuqiao; Huang, Yan; Meng, Wenjun; Wang, Zifeng; Bando, Yoshio; Golberg, Dmitri; Tang, Chengchun; Zhi, Chunyi

    2015-03-20

    Polymer composites with enhanced mechanical, thermal or optical performance usually suffer from poor ductility induced by confined mobility of polymer chains. Herein, highly ductile UV-shielding polymer composites are successfully fabricated. Boron nitride (BN) materials, with a wide band gap of around ∼6.0 eV, are used as fillers to achieve the remarkably improved UV-shielding performance of a polymer matrix. In addition, it is found that spherical morphology BN as a filler can keep the excellent ductility of the composites. For a comparison, it is demonstrated that traditional fillers, including conventional BN powders can achieve the similar UV-shielding performance but dramatically decrease the composite ductility. The mechanism behind this phenomenon is believed to be lubricant effects of BN nanospheres for sliding of polymer chains, which is in consistent with the thermal analyses. This study provides a new design to fabricate UV-shielding composite films with well-preserved ductility.

  4. Development of highly effective neutron shielding material made of phenol-novolac type epoxy resin

    Cho, Soo Haeng; Jeong, Myeong Soo; Hong, Sun Seok; Lee, Won Kyoung; Kim, Ik Soo; Shin, Young Joon; Do, Jae Bum; Ro, Seung Gy; Oh, Seok Jin

    1998-06-01

    Because the exposure to radiation in the nuclear facilities can be fatal to human, it is important to reduce the radiation dose level to a tolerable level. The purpose of this study is to develop highly effective neutron shielding materials for the shipping and storage cask of radioactive materials or in the nuclear/radiation facilities. On this study, we developed epoxy resin based neutron shielding materials and their various material properties, including neutron shielding ability, fire resistance, combustion characteristics, radiation resistance, thermal and mechanical properties were evaluated experimentally. Especially we developed phenol-novolac type epoxy resin based neutron shielding materials and their characteristics were also evaluated. (author). 22 refs., 11 tabs., 21 figs

  5. High field septum magnet using a superconducting shield for the Future Circular Collider

    AUTHOR|(CDS)2069375

    2017-01-01

    A zero-field cooled superconducting shield is proposed to realize a high-field (3–4 T) septum magnet for the Future Circular Collider hadron-hadron (FCC-hh) ring. Three planned prototypes using different materials and technical solutions are presented, which will be used to evaluate the feasibility of this idea as a part of the FCC study. The numerical simulation methods are described to calculate the field patterns around such a shield. A specific excitation current configuration is presented that maintains a fairly homogeneous field outside of a rectangular shield in a wide range of field levels from 0 to 3 Tesla. It is shown that a massless septum configuration (with an opening in the shield) is also possible and gives satisfactory field quality with realistic superconducting material properties.

  6. High School Book Fairs

    Fitzgerald, Marianne

    2006-01-01

    Many secondary students have given up the joy of reading. When asked why they don't read for pleasure, students came up with many different reasons, the first being lack of time. High school students are busy with after school jobs, sports, homework, etc. With the growing number of students enrolled in AP classes, not only is there not much time…

  7. Investing in High School

    Green, Daniel G.

    2012-01-01

    Strapped for cash, a Massachusetts high school creates its own venture capital fund to incentivize teachers to create programs that improve student learning. The result has been higher test scores and higher job satisfaction. One important program is credited with helping close the achievement gap at the school, while others have helped ambitious…

  8. Timetabling at High Schools

    Sørensen, Matias

    on the publicly available XHSTT format for modeling instances and solutions of the HSTP) and the Danish High School Timetabling Problem (DHSTP). For both problems a complex Mixed-Integer Programming (MIP) model is developed, and in both cases are empirical tests performed on a large number of real-life datasets......High school institutions face a number of important planning problems during each schoolyear. This Ph.D. thesis considers two of these planning problems: The High School Timetabling Problem (HSTP) and the Consultation Timetabling Problem (CTP). Furthermore a framework for handling various planning....... The second part contains the main scienti_c papers composed during the Ph.D. study. The third part of the thesis also contains scienti_c papers, but these are included as an appendix. In the HSTP, the goal is to obtain a timetable for the forthcoming school-year. A timetable consists of lectures scheduled...

  9. Proposal of Magnetic Circuit using Magnetic Shielding with Bulk-Type High Tc Superconductors

    Fukuoka, Katsuhiro; Hashimoto, Mitsuo; Tomita, Masaru; Murakami, Masato

    Recently, bulk-type high Tc superconductors having a characteristic of critical current density over 104 A/cm2 in liquid nitrogen temperature (77K) on 1T, can be produced. They are promising for many practical applications such as a magnetic bearing, a magnetic levitation, a flywheel, a magnetic shielding and others. In this research, we propose a magnetic circuit that is able to use for the magnetic shield of plural superconductors as an application of bulk-type high Tc superconductors. It is a closed magnetic circuit by means of a toroidal core. Characteristics of the magnetic circuit surrounded with superconductors are evaluated and the possibility is examined. As the magnetic circuit of the ferrite core is surrounded with superconductors, the magnetic flux is shielded even if it leaked from the ferrite core.

  10. The biological shield of a high-intensity spallation source: a monte Carlo design study

    Koprivnikar, I.; Schachinger, E.

    2004-01-01

    The design of high-intensity spallation sources requires the best possible estimates for the biological shield. The applicability of three-dimensional Monte Carlo simulation in the design of the biological shield of a spallation source will be discussed. In order to achieve reasonable computing times along with acceptable accuracy, biasing techniques are to be employed and it was the main purpose of this work to develop a strategy for an effective Monte Carlo simulation in shielding design. The most prominent MC computer codes, namely MCNPX and FLUKA99, have been applied to the same model spallation source (the European Spallation Source) and on the basis of the derived strategies, the design and characteristics of the target station shield are discussed. It is also the purpose of the paper to demonstrate the application of the developed strategy for the design of beam lines with their shielding using as an example the target-moderator-reflector complex of the ESS as the primary particle source. (author)

  11. Radiation shielding and dose rate distribution for the building of the high dose rate accelerator

    Matsuda, Koji; Takagaki, Torao; Nakase, Yoshiaki; Nakai, Yohta.

    1984-03-01

    A high dose rate electron accelerator was established at Osaka Laboratory for Radiation Chemistry, Takasaki Establishment, JAERI in the fiscal year of 1975. This report shows the fundamental concept for the radiation shielding of the accelerator building and the results of their calculations which were evaluated through the model experiments. After the construction of the building, the leak radiation was measured in order to evaluate the calculating method of radiation shielding. Dose rate distribution of X-rays was also measured in the whole area of the irradiation room as a data base. (author)

  12. Shielding considerations for an electron linear accelerator complex for high energy physics and photonics research

    Holmes, J.A.; Huntzinger, C.J.

    1987-01-01

    Radiation shielding considerations for a major high-energy physics and photonics research complex which comprise a 50 MeV electron linear accelerator injector, a 1.0 GeV electron linear accelerator and a 1.3 GeV storage ring are discussed. The facilities will be unique because of the close proximity of personnel to the accelerator beam lines, the need to adapt existing facilities and shielding materials and the application of strict ALARA dose guidelines while providing maximum access and flexibility during a phased construction program

  13. Radiation shielding lead shield

    Dei, Shoichi.

    1991-01-01

    The present invention concerns lead shields for radiation shielding. Shield boxes are disposed so as to surround a pipeline through which radioactive liquids, mists or like other objects are passed. Flanges are formed to each of the end edges of the shield boxes and the shield boxes are connected to each other by the flanges. Upon installation, empty shield boxes not charged with lead particles and iron plate shields are secured at first at the periphery of the pipeline. Then, lead particles are charged into the shield boxes. This attains a state as if lead plate corresponding to the depth of the box is disposed. Accordingly, operations for installation, dismantling and restoration can be conducted in an empty state with reduced weight to facilitate the operations. (I.S.)

  14. Dual Campus High School

    Carmen P. Mombourquette

    2013-04-01

    Full Text Available September 2010 witnessed the opening of the first complete dual campus high school in Alberta. Catholic Central High School, which had been in existence since 1967 in one building, now offered courses to students on two campuses. The “dual campus” philosophy was adopted so as to ensure maximum program flexibility for students. The philosophy, however, was destined to affect student engagement and staff efficacy as the change in organizational structure, campus locations, and course availability was dramatic. Changing school organizational structure also had the potential of affecting student achievement. A mixed-methods study utilizing engagement surveys, efficacy scales, and interviews with students and teachers was used to ascertain the degree of impact. The results of the study showed that minimal impact occurred to levels of student engagement, minor negative impact to staff efficacy, and a slight increase to student achievement results.

  15. Using depleted uranium to shield vitrified high-level waste packages

    Yoshimura, H.R.; Gildea, P.D.; Bernard, E.A.

    1995-01-01

    The underlying report for this paper evaluates options for using depleted uranium as shielding materials for transport systems for disposal of vitrified high-level waste (VHLW). In addition, economic analyses are presented to compare costs associated with these options to costs, associated with existing and proposed storage, transport, and diposal capabilities. A more detailed evaluation is provided elsewhere. (Yoshimura et al. 1995.)

  16. ORNL shielded facilities capable of remote handling of highly radioactive beta--gamma emitting materials

    Whitson, W.R.

    1977-09-01

    A survey of ORNL facilities having adequate shielding and containment for the remote handling of experimental quantities of highly radioactive beta-gamma emitting materials is summarized. Portions of the detailed descriptions of these facilities previously published in ORNL/TM-1268 are still valid and are repeated

  17. Reshaping High School English.

    Pirie, Bruce

    This book takes up the question of what shape high school English studies should take in the coming years. It describes an English program that blends philosophical depth with classroom practicality. Drawing examples from commonly taught texts such as "Macbeth,""To Kill a Mockingbird," and "Lord of the Flies," the…

  18. Radiation shielding properties of high performance concrete reinforced with basalt fibers infused with natural and enriched boron

    Zorla, Eyüp; Ipbüker, Cagatay [University of Tartu, Institute of Physics (Estonia); Biland, Alex [US Basalt Corp., Houston (United States); Kiisk, Madis [University of Tartu, Institute of Physics (Estonia); Kovaljov, Sergei [OÜ Basaltest, Tartu (Estonia); Tkaczyk, Alan H. [University of Tartu, Institute of Physics (Estonia); Gulik, Volodymyr, E-mail: volodymyr.gulik@gmail.com [Institute for Safety Problems of Nuclear Power Plants, Lysogirska 12, of. 201, 03028 Kyiv (Ukraine)

    2017-03-15

    Highlights: • Basalt fiber infused with natural and enriched boron in varying proportions. • Gamma-ray attenuation remains stable with addition of basalt-boron fiber. • Improvement in neutron shielding for nuclear facilities producing fast fission spectrum. • Basalt-boron fiber could decrease the shielding thickness in thermal spectrum reactors. - Abstract: The importance of radiation shielding is increasing in parallel with the expansion of the application areas of nuclear technologies. This study investigates the radiation shielding properties of two types of high strength concrete reinforced with basalt fibers infused with 12–20% boron oxide, containing varying fractions of natural and enriched boron. The gamma-ray shielding characteristics are analyzed with the help of the WinXCom, whereas the neutron shielding characteristics are modeled and computed by Monte Carlo Serpent code. For gamma-ray shielding, the attenuation coefficients of the studied samples do not display any significant variation due to the addition of basalt-boron fibers at any mixing proportion. For neutron shielding, the addition of basalt-boron fiber has negligible effects in the case of very fast neutrons (14 MeV), but it could considerably improve the neutron shielding of concrete for nuclear facilities producing a fast fission spectrum (e.g. with reactors as BN-800, FBTR) and thermal neutron spectrum (Light Water Reactors (LWR)). It was also found that basalt-boron fiber could decrease the thickness of radiation shielding material in thermal spectrum reactors.

  19. Radiation shielding properties of high performance concrete reinforced with basalt fibers infused with natural and enriched boron

    Zorla, Eyüp; Ipbüker, Cagatay; Biland, Alex; Kiisk, Madis; Kovaljov, Sergei; Tkaczyk, Alan H.; Gulik, Volodymyr

    2017-01-01

    Highlights: • Basalt fiber infused with natural and enriched boron in varying proportions. • Gamma-ray attenuation remains stable with addition of basalt-boron fiber. • Improvement in neutron shielding for nuclear facilities producing fast fission spectrum. • Basalt-boron fiber could decrease the shielding thickness in thermal spectrum reactors. - Abstract: The importance of radiation shielding is increasing in parallel with the expansion of the application areas of nuclear technologies. This study investigates the radiation shielding properties of two types of high strength concrete reinforced with basalt fibers infused with 12–20% boron oxide, containing varying fractions of natural and enriched boron. The gamma-ray shielding characteristics are analyzed with the help of the WinXCom, whereas the neutron shielding characteristics are modeled and computed by Monte Carlo Serpent code. For gamma-ray shielding, the attenuation coefficients of the studied samples do not display any significant variation due to the addition of basalt-boron fibers at any mixing proportion. For neutron shielding, the addition of basalt-boron fiber has negligible effects in the case of very fast neutrons (14 MeV), but it could considerably improve the neutron shielding of concrete for nuclear facilities producing a fast fission spectrum (e.g. with reactors as BN-800, FBTR) and thermal neutron spectrum (Light Water Reactors (LWR)). It was also found that basalt-boron fiber could decrease the thickness of radiation shielding material in thermal spectrum reactors.

  20. Basic design of shield blocks for a spallation neutron source under the high-intensity proton accelerator project

    Yoshida, Katsuhiko; Maekawa, Fujio; Takada, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-03-01

    Under the JAERI-KEK High-Intensity Proton Accelerator Project (J-PARC), a spallation neutron source driven by a 3 GeV-1 MW proton beam is planed to be constructed as a main part of the Materials and Life Science Facility. Overall dimensions of a biological shield of the neutron source had been determined by evaluation of shielding performance by Monte Carlo calculations. This report describes results of design studies on an optimum dividing scheme in terms of cost and treatment and mechanical strength of shield blocks for the biological shield. As for mechanical strength, it was studied whether the shield blocks would be stable, fall down or move to a horizontal direction in case of an earthquake of seismic intensity of 5.5 (250 Gal) as an abnormal load. For ceiling shielding blocks being supported by both ends of the long blocks, maximum bending moment and an amount of maximum deflection of their center were evaluated. (author)

  1. Basic design of shield blocks for a spallation neutron source under the high-intensity proton accelerator project

    Yoshida, K; Takada, H

    2003-01-01

    Under the JAERI-KEK High-Intensity Proton Accelerator Project (J-PARC), a spallation neutron source driven by a 3 GeV-1 MW proton beam is planed to be constructed as a main part of the Materials and Life Science Facility. Overall dimensions of a biological shield of the neutron source had been determined by evaluation of shielding performance by Monte Carlo calculations. This report describes results of design studies on an optimum dividing scheme in terms of cost and treatment and mechanical strength of shield blocks for the biological shield. As for mechanical strength, it was studied whether the shield blocks would be stable, fall down or move to a horizontal direction in case of an earthquake of seismic intensity of 5.5 (250 Gal) as an abnormal load. For ceiling shielding blocks being supported by both ends of the long blocks, maximum bending moment and an amount of maximum deflection of their center were evaluated.

  2. Practical high-density shielding materials for medical linear accelerator rooms

    Barish, R.J.

    1990-01-01

    High-energy linear accelerators are replacing lower energy units in radiation therapy centers. Radiation protection requirements necessitate expensive reconstruction of existing treatment rooms to accommodate these new machines. We describe two shielding materials: one made by embedding small pieces of scrap steel in cement, and the other made with cast iron in cement. Both materials produce high-density barriers at low cost using standard construction methods

  3. Performances of Kevlar and Polyethylene as radiation shielding on-board the International Space Station in high latitude radiation environment.

    Narici, Livio; Casolino, Marco; Di Fino, Luca; Larosa, Marianna; Picozza, Piergiorgio; Rizzo, Alessandro; Zaconte, Veronica

    2017-05-10

    Passive radiation shielding is a mandatory element in the design of an integrated solution to mitigate the effects of radiation during long deep space voyages for human exploration. Understanding and exploiting the characteristics of materials suitable for radiation shielding in space flights is, therefore, of primary importance. We present here the results of the first space-test on Kevlar and Polyethylene radiation shielding capabilities including direct measurements of the background baseline (no shield). Measurements are performed on-board of the International Space Station (Columbus modulus) during the ALTEA-shield ESA sponsored program. For the first time the shielding capability of such materials has been tested in a radiation environment similar to the deep-space one, thanks to the feature of the ALTEA system, which allows to select only high latitude orbital tracts of the International Space Station. Polyethylene is widely used for radiation shielding in space and therefore it is an excellent benchmark material to be used in comparative investigations. In this work we show that Kevlar has radiation shielding performances comparable to the Polyethylene ones, reaching a dose rate reduction of 32 ± 2% and a dose equivalent rate reduction of 55 ± 4% (for a shield of 10 g/cm 2 ).

  4. Enhanced conductive loss in nickel–cobalt sulfide nanostructures for highly efficient microwave absorption and shielding

    Li, Wanrong; Zhou, Min; Lu, Fei; Liu, Hongfei; Zhou, Yuxue; Zhu, Jun; Zeng, Xianghua

    2018-06-01

    Microwave-absorbing materials with light weight and high efficiency are desirable in addressing electromagnetic interference (EMI) problems. Herein, a nickel–cobalt sulfide (NCS) nanostructure was employed as a robust microwave absorber, which displayed an optimized reflection loss of  ‑49.1 dB in the gigahertz range with a loading of only 20 wt% in an NCS/paraffin wax composite. High electrical conductivity was found to contribute prominent conductive loss in NCS, leading to intense dielectric loss within a relatively low mass loading. Furthermore, owing to its high electrical conductivity and remarkable dielectric loss to microwaves, the prepared NCS exhibited excellent performance in EMI shielding. The EMI shielding efficiency of the 50 wt% NCS/paraffin composite exceeded 55 dB at the X-band, demonstrating NCS is a versatile candidate for solving EMI problems.

  5. A New Microwave Shield Preparation for Super High Frequency Range: Occupational Approach to Radiation Protection.

    Zaroushani, Vida; Khavanin, Ali; Jonidi Jafari, Ahmad; Mortazavi, Seyed Bagher

    2016-01-01

    Widespread use of X-band frequency (a part of the super high frequency microwave) in the various workplaces would contribute to occupational exposure with potential of adverse health effects.  According to limited study on microwave shielding for the workplace, this study tried to prepare a new microwave shielding for this purpose. We used EI-403 epoxy thermosetting resin as a matrix and nickel oxide nanoparticle with the diameter of 15-35 nm as filler. The Epoxy/ Nickel oxide composites with 5, 7, 9 and 11 wt% were made in three different thicknesses (2, 4 and 6 mm). According to transmission / reflection method, shielding effectiveness (SE) in the X-band frequency range (8-12.5 GHz) was measured by scattering parameters directly given by the 2-port Vector Network Analyzer. The fabricated composites characterized by X-ray Diffraction and Field Emission Scanning Electron Microscope. The best average of shielding effectiveness in each thickness of fabricated composites obtained by 11%-2 mm, 7%-4 mm and 7%-6 mm composites with SE values of 46.80%, 66.72% and 64.52%, respectively. In addition, the 11%-6 mm, 5%-6 mm and 11%-4 mm-fabricated composites were able to attenuate extremely the incident microwave energy at 8.01, 8.51 and 8.53 GHz by SE of 84.14%, 83.57 and 81.30%, respectively. The 7%-4mm composite could be introduced as a suitable alternative microwave shield in radiation protection topics in order to its proper SE and other preferable properties such as low cost and weight, resistance to corrosion etc. It is necessary to develop and investigate the efficacy of the fabricated composites in the fields by future studies.

  6. Shielding design of highly activated sample storage at reactor TRIGA PUSPATI

    Naim Syauqi Hamzah; Julia Abdul Karim; Mohamad Hairie Rabir; Muhd Husamuddin Abdul Khalil; Mohd Amin Sharifuldin Salleh

    2010-01-01

    Radiation protection has always been one of the most important things considered in Reaktor Triga PUSPATI (RTP) management. Currently, demands on sample activation were increased from variety of applicant in different research field area. Radiological hazard may occur if the samples evaluation done were misjudge or miscalculated. At present, there is no appropriate storage for highly activated samples. For that purpose, special irradiated samples storage box should be provided in order to segregate highly activated samples that produce high dose level and typical activated samples that produce lower dose level (1 - 2 mR/ hr). In this study, thickness required by common shielding material such as lead and concrete to reduce highly activated radiotracer sample (potassium bromide) with initial exposure dose of 5 R/ hr to background level (0.05 mR/ hr) were determined. Analyses were done using several methods including conventional shielding equation, half value layer calculation and Micro shield computer code. Design of new irradiated samples storage box for RTP that capable to contain high level gamma radioactivity were then proposed. (author)

  7. Radiation shielding

    Aitken, D.

    1979-01-01

    Shields for equipment in which ionising radiation is associated with high electrical gradients, for example X-ray tubes and particle accelerators, incorporate a radiation-absorbing metal, as such or as a compound, and are electrically non-conducting and can be placed in the high electrical gradient region of the equipment. Substances disclosed include dispersions of lead, tungsten, uranium or oxides of these in acrylics polyesters, PVC, ABS, polyamides, PTFE, epoxy resins, glass or ceramics. The material used may constitute an evacuable enclosure of the equipment or may be an external shield thereof. (U.K.)

  8. School Uniforms in Urban Public High Schools

    Draa, Virginia Ann Bendel

    2005-01-01

    The purpose of this study was to determine whether or not the implementation of a mandatory uniform policy in urban public high schools improved school performance measures at the building level for rates of attendance, graduation, academic proficiency, and student conduct as measured by rates of suspensions and expulsions. Sixty-four secondary…

  9. Especially for High School Teachers

    Howell, J. Emory

    2000-02-01

    Secondary School Feature Articles JCE Classroom Activity: #24. The Write Stuff: Using Paper Chromatography to Separate an Ink Mixture, p 176A Teaching Chemistry in the Midwinter Every year, forecasters around the world provide us with long-range predictions of what the seasons will afford us in the coming year. And each year, the weather provides a few surprises that the forecasters did not predict - such as a record amount of snow or record heat indexes, depending on where you live. Although the weatherman didn't predict it, we still must pull out our snow shovels or sun block and take the necessary steps to adapt to the situation. As teachers, we make predictions of teaching and learning goals that we aspire to achieve during a given year, and like the weather, the year brings surprises that aren't in line with our predictions. With that in mind, I would like to offer JCE as the scholastic snow shovel or sun shield you need to jump-start your class and reach the goals you have set. So find a warm (or cool) place, get comfortable, and spend some time with the February issue of JCE. Articles of General Interest in This Issue For readers living where snow falls, Williams's article on page 148 offers some historical background on the use of calcium chloride as a deicer. A diver that depends for its buoyancy upon gas given off by a chemical reaction is described by Derr, Lewis, and Derr in the article beginning on page 171. In her article appearing on pages 249-250, Wang describes a laboratory exercise that makes the mastery of solution preparation skills fun. The students' skill is tested by using the solutions they make to carry out the Briggs-Rauscher oscillating reaction. For high school class applications I recommend use of 3% hydrogen peroxide, described as an option in the article. A well-organized approach to separating an ink mixture, with some possibly new twists, is laid out in the student- and teacher-friendly format of JCE Classroom Activity: #24, pages

  10. Radiation Build-Up In Shielding Of Low Activity High Energia Gamma Source

    Helfi-Yuliati; Mukhlis-Akhadi

    2003-01-01

    Research to observe radiation build-up factor (b) in aluminium (Al), iron (Fe) and lead (Pb) for shielding of gamma radiation of high energy from 137 cs (E γ : 662 keV) source and 60 Co (E γ : 1332 keV) of low activity sources has been carried out. Al with Z =13 represent metal of low atomic number, Fe with Z =26 represent metal of medium atomic number, and Pb with Z = 82 represent metal of high atomic number. Low activity source in this research is source which if its dose rate decrease to 3 % of its initial dose rate became safe for the workers. Research was conducted by counting of radiation intensity behind shielding with its thickness vary from 1 to 5 times of half value thickness (HVT). NaI(TI) detector which connected to multi channel analyzer (MCA) was used for the counting. Calculation result show that all of b value are close to 1 (b ∼ 1) for all kinds of metals. No radiation build-up factor is required in estimating the shielding thickness from several kinds of metals for low activity of high energy gamma source. (author)

  11. Enhanced microwave shielding and mechanical properties of high loading MWCNT–epoxy composites

    Singh, B. P.; Prasanta; Choudhary, Veena; Saini, Parveen; Pande, Shailaja; Singh, V. N.; Mathur, R. B.

    2013-01-01

    Dispersion of high loading of carbon nanotubes (CNTs) in epoxy resin is a challenging task for the development of efficient and thin electromagnetic interference (EMI) shielding materials. Up to 20 wt% of multiwalled carbon nanotubes (MWCNTs) loading in the composite was achieved by forming CNT prepreg in the epoxy resin as a first step. These prepreg laminates were then compression molded to form composites which resulted in EMI shielding effectiveness of −19 dB for 0.35 mm thick film and −60 dB at for 1.75 mm thick composites in the X-band (8.2–12.4 GHz). One of the reasons for such high shielding is attributed to the high electrical conductivity of the order of 9 S cm −1 achieved in these composites which is at least an order of magnitude higher than previously reported results at this loading. In addition, an improvement of 40 % in the tensile strength over the neat resin value is observed. Thermal conductivity of the MWCNTs–epoxy composite reached 2.18 W/mK as compared to only 0.14 W/mK for cured epoxy.

  12. Enhanced microwave shielding and mechanical properties of high loading MWCNT-epoxy composites

    Singh, B. P.; Prasanta; Choudhary, Veena; Saini, Parveen; Pande, Shailaja; Singh, V. N.; Mathur, R. B.

    2013-04-01

    Dispersion of high loading of carbon nanotubes (CNTs) in epoxy resin is a challenging task for the development of efficient and thin electromagnetic interference (EMI) shielding materials. Up to 20 wt% of multiwalled carbon nanotubes (MWCNTs) loading in the composite was achieved by forming CNT prepreg in the epoxy resin as a first step. These prepreg laminates were then compression molded to form composites which resulted in EMI shielding effectiveness of -19 dB for 0.35 mm thick film and -60 dB at for 1.75 mm thick composites in the X-band (8.2-12.4 GHz). One of the reasons for such high shielding is attributed to the high electrical conductivity of the order of 9 S cm-1 achieved in these composites which is at least an order of magnitude higher than previously reported results at this loading. In addition, an improvement of 40 % in the tensile strength over the neat resin value is observed. Thermal conductivity of the MWCNTs-epoxy composite reached 2.18 W/mK as compared to only 0.14 W/mK for cured epoxy.

  13. Study of casks shielded with heavy metal to transport highly radioactive substances

    Lucchesi, R.F.; Hara, D.H.S.; Martinez, L.G.; Mucsi, C.S.; Rossi, J.L.

    2014-01-01

    Nowadays, Brazil relies on casks produced abroad for transportation in its territory of substances that are sources of high radioactivity, especially the Mo-99. The product of the radioactive decay of the Mo-99 is the Tc-99m, which is used in nuclear medicine for administration to humans in the form of injectable radioactive drugs for the image diagnosis of numerous pathologies. This paper aims to study the existing casks in order to propose materials for the construction of the core part as shielding against gamma radiation. To this purpose, the existing literature on the subject was studied, as well as evaluation of existing and available casks. The study was focused on the core of which is made of heavy metals, especially depleted uranium for shielding the emitted radiation. (author)

  14. High Density Radiation Shielding Concretes for Hot Cells of 99mTc Project

    Sakr, K.

    2006-01-01

    High density concrete [more than 3.6 ton/m 3 (3.6x10 3 kg/m 3 )] was prepared to be used as a radiation shielding concrete (RSC) for hot-cells in gel technetium project at inshas to attenuate gamma radiation emitted from radioactive sources. different types of concrete were prepared by mixing local mineral aggregates mainly gravel and ilmenite . iron shots were added to the concrete mixture proportion as partial replacement of heavy aggregates to increase its density. the physical properties of prepared concrete in both plastic and hardened phases were investigated. compressive strength and radiation attenuation of gamma rays were determined. Results showed that ilmenite concrete mixed with iron shots had the highest density suitable to be use as RSC according to the chinese hot cell design requirements. Recommendations to avoid some technical problems of manufacturing radiation shielding concrete were maintained

  15. Equipment and detectors calibration behind shielding of CERN high-energy particle accelerator SPS: June 2007

    Spurny, Frantisek; Ploc, Ondrej

    2008-02-01

    High energy stray radiation fields have been realised since 1993 at CERN also in the frame of CEC-CERN collaboration on the project: 'Detection and the Dosimetry of Neutrons and Charged Particles at Aviation Altitudes in the Earth's Atmosphere'. They are formed at the H6 beam of the north experimental area of the SPS facility. Two shielding configurations have been built, with the top concrete, resp. top iron shielding. Many intercalibration experiments have been realised since the beginning. After an interruption due to technical problems, two other campaigns have been realised during 2006 year, another one during the June 2007. This report describes analyses and discusses the most of results obtained during the last, 2007 run.. (author)

  16. Study on bulk shielding for a spallation neutron source facility in the high-intensity proton accelerator project

    Maekawa, F; Takada, H; Teshigawara, M; Watanabe, N

    2002-01-01

    Under the JAERI-KEK High-Intensity Proton Accelerator Project, a spallation neutron source driven by a 3 GeV-1 MW proton beam is planed to be constructed in a main part of the Materials and Life Science Facility. This report describes results of a study on bulk shielding performance of a biological shield for the spallation neutron source by means of a Monte Carlo calculation method, that is important in terms of radiation safety and cost reduction. A shielding configuration was determined as a reference case by considering preliminary studies and interaction with other components, then shielding thickness that was required to achieve a target dose rate of 1 mu Sv/h was derived. Effects of calculation conditions such as shielding materials and dimensions on the shielding performance was investigated by changing those parameters. By taking all the results and design margins into account, a shielding configuration that was identified as the most appropriate was finally determined as follows. An iron shield regi...

  17. Scaling invariance of spherical projectile fragmentation upon high-velocity impact on a thin continuous shield

    Myagkov, N. N., E-mail: nn-myagkov@mail.ru [Russian Academy of Sciences, Institute of Applied Mechanics (Russian Federation)

    2017-01-15

    The problem of aluminum projectile fragmentation upon high-velocity impact on a thin aluminum shield is considered. A distinctive feature of this description is that the fragmentation has been numerically simulated using the complete system of equations of deformed solid mechanics by a method of smoothed particle hydrodynamics in three-dimensional setting. The transition from damage to fragmentation is analyzed and scaling relations are derived in terms of the impact velocity (V), ratio of shield thickness to projectile diameter (h/D), and ultimate strength (σ{sub p}) in the criterion of projectile and shield fracture. Analysis shows that the critical impact velocity V{sub c} (separating the damage and fragmentation regions) is a power function of σ{sub p} and h/D. In the supercritical region (V > V{sub c}), the weight-average fragment mass asymptotically tends to a power function of the impact velocity with exponent independent of h/D and σ{sub p}. Mean cumulative fragment mass distributions at the critical point are scale-invariant with respect to parameters h/D and σ{sub p}. Average masses of the largest fragments are also scale-invariant at V > V{sub c}, but only with respect to variable parameter σ{sub p}.

  18. Efficiency of steel-concrete compositions in a side shielding of high-energy proton accelerators

    Getmanov, V.B.; Kryuchkov, V.P.; Lebedev, V.N.

    1983-01-01

    Aiming at the study of efficiency of application of heavy concretes with the density up to 6.3 g/cm -3 with iron-ore aggregate and steel scrap with shot the calculational study on high-energy radiation attenuation in the accelerator side shield has been carried out. The calculation is made for five concretes with the density 2.38; 3.66; 4.68; 5.34; 6.30 g x cm -3 and for pure iron. The real chemical composition of each concrete, including hydrogen, is taken into account. The real spectrum of hadron generated in the materiai of evacuated ionguide wall under the effect of the 70 GeV proton beam incident on the wall at a narrow angle THETA -3 ensuring the same ratio of the dose or hadron fluence with the energy > 20 MeV attenuation is accepted as a relative shield efficiency of the material. It is shown, that for steel-concrete compositions with the density > 5.6 gxcm -3 the relative shield efficiency decreases sharply. It is also shown, that aplication of concretes with the density 3.6-3.7 gxcm -3 is expedient and economically profitable

  19. Ultra high molecular weight polyethylene (UHMWPE) fiber epoxy composite hybridized with Gadolinium and Boron nanoparticles for radiation shielding

    Mani, Venkat; Prasad, Narasimha S.; Kelkar, Ajit

    2016-09-01

    Deep space radiations pose a major threat to the astronauts and their spacecraft during long duration space exploration missions. The two sources of radiation that are of concern are the galactic cosmic radiation (GCR) and the short lived secondary neutron radiations that are generated as a result of fragmentation that occurs when GCR strikes target nuclei in a spacecraft. Energy loss, during the interaction of GCR and the shielding material, increases with the charge to mass ratio of the shielding material. Hydrogen with no neutron in its nucleus has the highest charge to mass ratio and is the element which is the most effective shield against GCR. Some of the polymers because of their higher hydrogen content also serve as radiation shield materials. Ultra High Molecular Weight Polyethylene (UHMWPE) fibers, apart from possessing radiation shielding properties by the virtue of the high hydrogen content, are known for extraordinary properties. An effective radiation shielding material is the one that will offer protection from GCR and impede the secondary neutron radiations resulting from the fragmentation process. Neutrons, which result from fragmentation, do not respond to the Coulombic interaction that shield against GCR. To prevent the deleterious effects of secondary neutrons, targets such as Gadolinium are required. In this paper, the radiation shielding studies that were carried out on the fabricated sandwich panels by vacuum-assisted resin transfer molding (VARTM) process are presented. VARTM is a manufacturing process used for making large composite structures by infusing resin into base materials formed with woven fabric or fiber using vacuum pressure. Using the VARTM process, the hybridization of Epoxy/UHMWPE composites with Gadolinium nanoparticles, Boron, and Boron carbide nanoparticles in the form of sandwich panels were successfully carried out. The preliminary results from neutron radiation tests show that greater than 99% shielding performance was

  20. Double-layer rotor magnetic shield performance analysis in high temperature superconducting synchronous generators under short circuit fault conditions

    Hekmati, Arsalan; Aliahmadi, Mehdi

    2016-12-01

    High temperature superconducting, HTS, synchronous machines benefit from a rotor magnetic shield in order to protect superconducting coils against asynchronous magnetic fields. This magnetic shield, however, suffers from exerted Lorentz forces generated in light of induced eddy currents during transient conditions, e.g. stator windings short-circuit fault. In addition, to the exerted electromagnetic forces, eddy current losses and the associated effects on the cryogenic system are the other consequences of shielding HTS coils. This study aims at investigating the Rotor Magnetic Shield, RMS, performance in HTS synchronous generators under stator winding short-circuit fault conditions. The induced eddy currents in different circumferential positions of the rotor magnetic shield along with associated Joule heating losses would be studied using 2-D time-stepping Finite Element Analysis, FEA. The investigation of Lorentz forces exerted on the magnetic shield during transient conditions has also been performed in this paper. The obtained results show that double line-to-ground fault is of the most importance among different types of short-circuit faults. It was revealed that when it comes to the design of the rotor magnetic shields, in addition to the eddy current distribution and the associated ohmic losses, two phase-to-ground fault should be taken into account since the produced electromagnetic forces in the time of fault conditions are more severe during double line-to-ground fault.

  1. Experimental and analytical study for demonstration program on shielding of casks for high-level wastes

    Ueki, K.; Nakazawa, M.; Hattorl, S.; Ozaki, S.; Tamaki, H.; Kadotani, H.; Ishizuka, T.; Ishikawa, S.

    1993-01-01

    The following remarks were obtained from the experiment and the DOT 3.5 and the MCNP analyses on the gamma ray and the neutron dose equivalent rates in the cask of interest. 1. The cask has thinner neutron shielding parts around the trunnions. Significant neutrons streaming around the trunnion parts was observed which was also cleared by the MCNP analysis for the 252 Cf source experiment. Accordingly, detailed neutron streaming calculations are required to evaluate the dose levels around the trunnions when loading the vitrified high-level wastes. 2. The room-scattered obstructive neutrons, mainly originating from the neutrons penetrating around the trunnions, at the top and the bottom of the cask are reduced significantly by preparing the water tank at the top and the water layer at the bottom. Therefore, a more accurate experiment is to be carried out in the future shielding experiment especially for neutrons. However, because the water tank and the layer do not exist in the actual high-level wastes transport cask, the experiment without the water tank and layer are not dispensable to demonstrate the transport conditions of the actual cask, too. 3. The gamma-ray and the neutron dose equivalent rate distributions obtained from the DOT 3.5 and the MCNP calculations, respectively, agreed closely with the measured values in the cask areas of interest. Accordingly, the DOT 3.5 code and the MCNP code with the NESX estimator can be employed not only for the shielding analysis of the future experiments, but also for making a safety analysis report of high-level wastes transport casks. (J.P.N.)

  2. Design of piezoelectric transducer layer with electromagnetic shielding and high connection reliability

    Qiu, Lei; Yuan, Shenfang; Shi, Xiaoling; Huang, Tianxiang

    2012-01-01

    Piezoelectric transducer (PZT) and Lamb wave based structural health monitoring (SHM) method have been widely studied for on-line SHM of high-performance structures. To monitor large-scale structures, a dense PZTs array is required. In order to improve the placement efficiency and reduce the wire burden of the PZTs array, the concept of the piezoelectric transducers layer (PSL) was proposed. The PSL consists of PZTs, a flexible interlayer with printed wires and signal input/output interface. For on-line SHM on real aircraft structures, there are two main issues on electromagnetic interference and connection reliability of the PSL. To address the issues, an electromagnetic shielding design method of the PSL to reduce spatial electromagnetic noise and crosstalk is proposed and a combined welding–cementation process based connection reliability design method is proposed to enhance the connection reliability between the PZTs and the flexible interlayer. Two experiments on electromagnetic interference suppression are performed to validate the shielding design of the PSL. The experimental results show that the amplitudes of the spatial electromagnetic noise and crosstalk output from the shielded PSL developed by this paper are − 15 dB and − 25 dB lower than those of the ordinary PSL, respectively. Other two experiments on temperature durability ( − 55 °C–80 °C ) and strength durability (160–1600με, one million load cycles) are applied to the PSL to validate the connection reliability. The low repeatability errors (less than 3% and less than 5%, respectively) indicate that the developed PSL is of high connection reliability and long fatigue life. (paper)

  3. Design of piezoelectric transducer layer with electromagnetic shielding and high connection reliability

    Qiu, Lei; Yuan, Shenfang; Shi, Xiaoling; Huang, Tianxiang

    2012-07-01

    Piezoelectric transducer (PZT) and Lamb wave based structural health monitoring (SHM) method have been widely studied for on-line SHM of high-performance structures. To monitor large-scale structures, a dense PZTs array is required. In order to improve the placement efficiency and reduce the wire burden of the PZTs array, the concept of the piezoelectric transducers layer (PSL) was proposed. The PSL consists of PZTs, a flexible interlayer with printed wires and signal input/output interface. For on-line SHM on real aircraft structures, there are two main issues on electromagnetic interference and connection reliability of the PSL. To address the issues, an electromagnetic shielding design method of the PSL to reduce spatial electromagnetic noise and crosstalk is proposed and a combined welding-cementation process based connection reliability design method is proposed to enhance the connection reliability between the PZTs and the flexible interlayer. Two experiments on electromagnetic interference suppression are performed to validate the shielding design of the PSL. The experimental results show that the amplitudes of the spatial electromagnetic noise and crosstalk output from the shielded PSL developed by this paper are - 15 dB and - 25 dB lower than those of the ordinary PSL, respectively. Other two experiments on temperature durability ( - 55 °C-80 °C ) and strength durability (160-1600μɛ, one million load cycles) are applied to the PSL to validate the connection reliability. The low repeatability errors (less than 3% and less than 5%, respectively) indicate that the developed PSL is of high connection reliability and long fatigue life.

  4. Shielding experiments with high-energy heavy ions for spaceflight applications

    Zeitlin, C; Guetersloh, S; Heilbronn, L; Miller, J; Elkhayari, N; Empl, A; LeBourgeois, M; Mayes, B W; Pinsky, L; Christl, M; Kuznetsov, E

    2008-01-01

    Mitigation of radiation exposures received by astronauts on deep-space missions must be considered in the design of future spacecraft. The galactic cosmic rays (GCR) include high-energy heavy ions, many of which have ranges that exceed the depth of shielding that can be launched in realistic scenarios. Some of these ions are highly ionizing (producing a high dose per particle) and for some biological endpoints are more damaging per unit dose than sparsely ionizing radiation. The principal physical mechanism by which the dose and dose equivalent delivered by these particles can be reduced is nuclear fragmentation, the result of inelastic collisions between nuclei in the hull of the spacecraft and/or other materials. These interactions break the incident ions into lighter, less ionizing and less biologically effective particles. We have previously reported the tests of shielding effectiveness using many materials in a 1 GeV nucleon -1 56 Fe beam, and also reported results using a single polyethylene (CH 2 ) target in a variety of beam ions and energies up to 1 GeV nucleon -1 . An important, but tentative, conclusion of those studies was that the average behavior of heavy ions in the GCR would be better simulated by heavy beams at energies above 1 GeV nucleon -1 . Following up on that work, we report new results using beams of 12 C, 28 Si and 56 Fe, each at three energies, 3, 5 and 10 GeV nucleon -1 , on carbon, polyethylene, aluminium and iron targets

  5. Green accounts & day high schools

    Jørgensen, Michael Søgaard

    1997-01-01

    The arcticle presents the concept of green accounts and describes how it can be used in the daily work and the teaching at day high schools.......The arcticle presents the concept of green accounts and describes how it can be used in the daily work and the teaching at day high schools....

  6. Rebellion in a High School.

    Stinchcombe, Arthur L.

    The premise of this book is that high school rebellion is an "expression of alienation from socially present authorities." Such rebellion is a manifestation of "expressive alienation" and has the quality of hatred or sullenness. Rebellious high school students are likely to be non-utilitarian, negativistic, hedonistic, and to stress group…

  7. Experimental Investigation of Multi-layer Insulation Effect on Damage of Stuffed Shield by High-velocity Impact

    GUAN Gong-shun

    2016-09-01

    Full Text Available The stuffed shield with multi-layer insulation(MLI was designed by improving on Al Whipple shield, and a series of high-velocity impact tests were practiced with a two-stage light gas gun facility at vacuum environment. The damage model of the stuffed shield with different MLI location by Al-sphere projectile impacting was obtained. The effect of MLI on damage of the stuffed shield by high-velocity impact was studied. The results indicate when the MLI is located at front side of the first Al-plate, the protection performance of the stuffed shield is improved with the larger perforation diameter of the first Al-plate and more impact kinetic energy dissipation of the projectile. When MLI is arranged at back side of the first Al-plate, the expansion of the secondary debris cloud from projectile impacting the first Al-plate is restrained, it is not good to improve the protection performance of the stuffed shield. When MLI is arranged at front side of the stuffed wall, the perforation size of the stuffed wall increases; when MLI is arranged at front side of the rear wall, the distribution range of crater on the rear wall decreases.

  8. High-performance heavy concrete as a multi-purpose shield

    Mortazavi, S. M. J.; Mosleh-Shirazi, M. A.; Roshan-Shomal, P.; Raadpey, N.; Baradaran-Ghahfarokhi, M.

    2010-01-01

    Concrete has long been used as a shield against high-energy photons and neutrons. In this study, colemanite and galena minerals (CoGa) were used for the production of an economical high-performance heavy concrete. To measure the gamma radiation attenuation of the CoGa concrete samples, they were exposed to a narrow beam of gamma rays emitted from a 60 Co radiotherapy unit. An Am-Be neutron source was used for assessing the shielding properties of the samples against neutrons. The compression strengths of both types of concrete mixes (CoGa and reference concrete) were investigated. The range of the densities of the heavy concrete samples was 4100-4650 kg m -3 , whereas it was 2300-2600 kg m -3 in the ordinary concrete reference samples. The half-value layer of the CoGa concrete samples for 60 Co gamma rays was 2.49 cm; much less than that of ordinary concrete (6.0 cm). Moreover, CoGa concrete samples had a 10% greater neutron absorption compared with reference concrete. (authors)

  9. Development of high-performance shielding material by heat curing method

    Miura, Toshimasa; Hirao, Yoshihiro; Hayashi, Takayuki; Okuno, Koichi; Sato, Osamu [National Maritime Research Institute, Ibaraki (Japan)

    2002-07-01

    A high-performance shielding material is developed by a heat curing method. It is mainly made of a thermosetting resin, lead powder, and a boron compound. To make the resin, a single functional monomer stearyl methacrylate (SMA) is used. To get good dispersion of lead and the boron compound in the resin, the viscosity of the SMA is increased by adding a small amount of a peroxide into the liquid monomer and heating up to the temperature of 100 .deg. C. Next, a peroxide, lead powder, a boron compound, a three functional monomer, and a curing accelerator are mixed into the viscous SMA. The mixture is cured in an atmosphere of nitrogen after removing bubbles using a vacuum pump. Measured properties of the cured material are as follows. The curing rate of SMA is 97 %. The density is kept 2.35 g/cm{sub 3} in the range from room temperature to 150 .deg. C. The weight-change measured by a thermogravimetry is 0.16 % in the range from room temperature to 200 .deg. C. Details of fragments in the gas released from the material is analyzed by a gas chromatography and a mass spectrometry. The hydrogen content of the material is 6.04x10 {sub 22} /cm{sub 3} . The shielding effect is calculated for a fission source by an Sn code ANISN. The shielding effect of the curing material is excellent. For example, concrete shield of a certain thickness can be replaced by the material having a thickness less than a half of concrete. Several samples of the material are irradiated at an irradiation equipment of the research reactor JRR-4 installed at Japan Atomic Energy Research Institute. At the 14{sub th} day after irradiating with the thermal neutron fluence of 6.6x10{sub 15} /cm{sub 2} , the radioactivity is less than one tenth of 75 Bq/g above which materials are regulated as the radioactive substance in Japan.

  10. Radiation shielding

    Yue, D.D.

    1979-01-01

    Details are given of a cylindrical electric penetration assembly for carrying instrumentation leads, used in monitoring the performance of a nuclear reactor, through the containment wall of the reactor. Effective yet economical shielding protection against both fast neutron and high-energy gamma radiation is provided. Adequate spacing within the assembly allows excessive heat to be efficiently dissipated and means of monitoring all potential radiation and gas leakage paths are provided. (UK)

  11. Shielding for Critical Organs and Radiation Exposure Dose Distribution in Patients with High Energy Radiotherapy

    Chu, Sung Sil; Suh, Chang Ok; Kim, Gwi Eon

    2002-01-01

    High energy photon beams from medical linear accelerators produce large scattered radiation by various components of the treatment head, collimator and walls or objects in the treatment room including the patient. These scattered radiation do not provide therapeutic dose and are considered a hazard from the radiation safety perspective. Scattered dose of therapeutic high energy radiation beams are contributed significant unwanted dose to the patient. ICRP take the position that a dose of 500mGy may cause abortion at any stage of pregnancy and that radiation detriment to the fetus includes risk of mental retardation with a possible threshold in the dose response relationship around 100 mGy for the gestational period. The ICRP principle of As Low As Reasonably Achievable (ALARA) was recommended for protection of occupation upon the linear no-threshold dose response hypothesis for cancer induction. We suggest this ALARA principle be applied to the fetus and testicle in therapeutic treatment. Radiation dose outside a photon treatment filed is mostly due to scattered photons . This scattered dose is a function of the distance from the beam edge, treatment geometry, primary photon energy, and depth in the patient. The need for effective shielding of the fetus and testicle is reinforced when young patients are treated with external beam radiation therapy and then shielding designed to reduce the scattered photon dose to normal organs have to considered. Irradiation was performed in phantom using high energy photon beams produced by a Varian 2100C/D medical linear accelerator (Varian Oncology Systems, Polo Alto, CA) located at the Yonsei Cancer Center. The composite phantom used was comprised of a commercially available anthropomorphic Rando phantom (Phantom Laboratory Inc., Salem, YN) and a rectangular solid polystyrene phantom of dimensions 30cm x 30cm x 20cm. The anthropomorphic Rando phantom represents an average man made from tissue equivalent materials that is

  12. Shielding for Critical Organs and Radiation Exposure Dose Distribution in Patients with High Energy Radiotherapy

    Chu, Sung Sil; Suh, Chang Ok; Kim, Gwi Eon [Yonsei Univ., Seoul (Korea, Republic of)

    2002-03-15

    High energy photon beams from medical linear accelerators produce large scattered radiation by various components of the treatment head, collimator and walls or objects in the treatment room including the patient. These scattered radiation do not provide therapeutic dose and are considered a hazard from the radiation safety perspective. Scattered dose of therapeutic high energy radiation beams are contributed significant unwanted dose to the patient. ICRP take the position that a dose of 500mGy may cause abortion at any stage of pregnancy and that radiation detriment to the fetus includes risk of mental retardation with a possible threshold in the dose response relationship around 100 mGy for the gestational period. The ICRP principle of As Low As Reasonably Achievable (ALARA) was recommended for protection of occupation upon the linear no-threshold dose response hypothesis for cancer induction. We suggest this ALARA principle be applied to the fetus and testicle in therapeutic treatment. Radiation dose outside a photon treatment filed is mostly due to scattered photons . This scattered dose is a function of the distance from the beam edge, treatment geometry, primary photon energy, and depth in the patient. The need for effective shielding of the fetus and testicle is reinforced when young patients are treated with external beam radiation therapy and then shielding designed to reduce the scattered photon dose to normal organs have to considered. Irradiation was performed in phantom using high energy photon beams produced by a Varian 2100C/D medical linear accelerator (Varian Oncology Systems, Polo Alto, CA) located at the Yonsei Cancer Center. The composite phantom used was comprised of a commercially available anthropomorphic Rando phantom (Phantom Laboratory Inc., Salem, YN) and a rectangular solid polystyrene phantom of dimensions 30cm x 30cm x 20cm. The anthropomorphic Rando phantom represents an average man made from tissue equivalent materials that is

  13. 3-dimensional shielding design for a spallation neutron source facility in the high-intensity proton accelerator project

    Tamura, Masaya; Maekawa, Fujio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-03-01

    Evaluation of shielding performance for a 1 MW spallation neutron source facility in the Materials and Life Science Facility being constructed in the High-Intensity Proton Accelerator Project (J-PARC) is important from a viewpoint of radiation safety and optimization of arrangement of components. This report describes evaluated results for the shielding performance with modeling three-dimensionally whole structural components including gaps between them in detail. A Monte Carlo calculation method with MCNPX2.2.6 code and LA-150 library was adopted. Streaming and void effects, optimization of shield for cost reduction and optimization of arrangement of structures such as shutters were investigated. The streaming effects were investigated quantitatively by changing the detailed structure of components and gap widths built into the calculation model. Horizontal required shield thicknesses were ranged from about 6.5 m to 7.5 m as a function of neutron beam line angles. A shutter mechanism for a horizontal neutron reflectometer that was directed downward was devised, and it was shown that the shielding performance of the shutter was acceptable. An optimal biological shield configuration was finally determined according to the calculated results. (author)

  14. Production of an economic high-density concrete for shielding megavoltage radiotherapy rooms and nuclear reactors

    Mortazavi, S. M. J.; Mosleh-Shirazi, M. A.; Maheri, M. R.; Haji-pour, A.; Yousefnia, H.; Zolghadri, S.

    2007-01-01

    In megavoltage radiotherapy rooms, ordinary concrete is usually used due to its low construction costs, although higher density concrete are sometimes used, as well. The use of high-density concrete decreases the required thickness of the concrete barrier; hence, its disadvantage is its high cost. In a nuclear reactor, neutron radiation is the most difficult to shield. A method for production of economic high-density concrete witt, appropriate engineering properties would be very useful. Materials and Methods: Galena (Pb S) mineral was used to produce of a high-density concrete. Galena can be found in many parts of Iran. Two types of concrete mixes were produced. The water-to-concrete (w/c) ratios of the reference and galena concrete mixes were 0.53 and 0.25, respectively. To measure the gamma radiation attenuation of Galena concrete samples, they were exposed to a narrow beam of gamma rays emitted from a cobalt-60 therapy unit. Results: The Galena mineral used in this study had a density of 7400 kg/m 3 . The concrete samples had a density of 4800 kg/m 3 . The measured half value layer thickness of the Galena concrete samples for cobalt 60 gamma rays was much less than that of ordinary concrete (2.6 cm compared to 6.0 cm). Furthermore, the galena concrete samples had significantly higher compressive strength (500 kg/cm 2 compared to 300 kg/cm 2 ). Conclusion: The Galena concrete samples made in our laboratories had showed good shielding/engineering properties in comparison with all samples made by using high-density materials other than depleted uranium. Based on the preliminary results, Galena concrete is maybe a suitable option where high-density concrete is required in megavoltage radiotherapy rooms as well as nuclear reactors

  15. Simulation of photon attenuation coefficients for high effective shielding material Lead-Boron Polyethyene

    Zhang, L.; Jia, M. C.; Gong, J. J.; Xia, W. M.

    2017-12-01

    The mass attenuation coefficient of various Lead-Boron Polyethylene samples which can be used as the photon shielding materials in marine reactor, have been simulated using the MCNP-5 code, and compared with the theoretical values at the photon energy range 0.001MeV—20MeV. A good agreement has been observed. The variations of mass attenuation coefficient, linear attenuation coefficient and mean free path with photon energy between 0.001MeV to 100MeV have been plotted. The result shows that all the coefficients strongly depends on the photon energy, material atomic composition and density. The dose transmission factors for source Cesium-137 and Cobalt-60 have been worked out and their variations with the thickness of various sample materials have also been plotted. The variations show that with the increase of materials thickness the dose transmission factors decrease continuously. The results of this paper can provide some reference for the use of the high effective shielding material Lead-Boron Polyethyene.

  16. CASIM, High Energy Cascades in Shields of Arbitrary Geometry Using Monte-Carlo Method

    Van Ginneken, A.

    1987-01-01

    1 - Description of problem or function: CASIM is a Monte Carlo program to study the average development of high energy cascades in large targets (shields) of arbitrary geometry and composition. The program is best suited for incident energies in the range 20-1000 GeV. 2 - Method of solution: The simulation makes extensive use of weighting techniques to avoid difficulties encountered in sampling complicated distributions and to allow the user to introduce bias in the sampling. The program uses the particle production model (in the form of a set of inclusive distributions) to compute (a) star densities (i.e. nuclear interaction densities) as a function of location and particle type throughout the target. From these star densities, estimates of a number of quantities of radiobiological interest can be obtained; (b) momentum spectra of particles interacting in the shield also as a function of location and type; (c) energy deposited by the cascade. This quantity is a useful measure of target heating embedded in the target (ionization calorimeter). 3 - Restrictions on the complexity of the problem: The program does not study transport of low momentum particles (less than or equal to 0.3 GeV/c)

  17. Especially for High School Teachers

    Howell, J. Emory

    2001-05-01

    Literature Cited National Science Education Standards; National Academy Press: Washington, DC, 1996; http://www. nap.edu/readingroom/books/nses/. Principles and Standards for School Mathematics; National Council of Teachers of Mathematics: Washington, DC, 2000; http://standards.nctm.org/. Visit CLIC, an Online Resource for High School Teachers at http://jchemed.chem.wisc.edu/HS/

  18. Shielding experiments with high-energy heavy ions for spaceflight applications

    Zeitlin, C; Guetersloh, S; Heilbronn, L; Miller, J [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Elkhayari, N; Empl, A; LeBourgeois, M; Mayes, B W; Pinsky, L [Physics Department, University of Houston, Houston, TX (United States); Christl, M [NASA Marshall Spaceflight Center, Huntsville, AL (United States); Kuznetsov, E [Physics Department, University of Alabama, Huntsville, AL (United States)], E-mail: cjzeitlin@lbl.gov

    2008-07-15

    Mitigation of radiation exposures received by astronauts on deep-space missions must be considered in the design of future spacecraft. The galactic cosmic rays (GCR) include high-energy heavy ions, many of which have ranges that exceed the depth of shielding that can be launched in realistic scenarios. Some of these ions are highly ionizing (producing a high dose per particle) and for some biological endpoints are more damaging per unit dose than sparsely ionizing radiation. The principal physical mechanism by which the dose and dose equivalent delivered by these particles can be reduced is nuclear fragmentation, the result of inelastic collisions between nuclei in the hull of the spacecraft and/or other materials. These interactions break the incident ions into lighter, less ionizing and less biologically effective particles. We have previously reported the tests of shielding effectiveness using many materials in a 1 GeV nucleon{sup -1} {sup 56}Fe beam, and also reported results using a single polyethylene (CH{sub 2}) target in a variety of beam ions and energies up to 1 GeV nucleon{sup -1}. An important, but tentative, conclusion of those studies was that the average behavior of heavy ions in the GCR would be better simulated by heavy beams at energies above 1 GeV nucleon{sup -1}. Following up on that work, we report new results using beams of {sup 12}C, {sup 28}Si and {sup 56}Fe, each at three energies, 3, 5 and 10 GeV nucleon{sup -1}, on carbon, polyethylene, aluminium and iron targets.

  19. Authoritative School Climate and High School Dropout Rates

    Jia, Yuane; Konold, Timothy R.; Cornell, Dewey

    2016-01-01

    This study tested the association between school-wide measures of an authoritative school climate and high school dropout rates in a statewide sample of 315 high schools. Regression models at the school level of analysis used teacher and student measures of disciplinary structure, student support, and academic expectations to predict overall high…

  20. Shielding Design and Leaking Measurement for the High Energy Radiation Room

    Chu, Sung Sil

    1979-01-01

    An optimum shielding design and the computation of protective barriers for high energy radiation therapy room, Toshiba 13 MeV , are presented. We obtained following results by comparison between the p recalculating values and actual survey after complete installation of radio generating units. 1. The precalculating values of protective barrier are 5 times more protective than that of actual measurement. 2. The dose rate during exposure are 2-10 mR /hr at out of the door and the control room. 3. The exposure doses for occupationally persons are relatively low levels, the average values of exposure dose is 10-50 mR per month. 4. The foul smelling and ozone gas production from long exposure of cancer patients cannot be eliminated when the room is ill ventilated

  1. Functional components for a design strategy: Hot cell shielding in the high reliability safeguards methodology

    Borrelli, R.A., E-mail: rborrelli@uidaho.edu

    2016-08-15

    The high reliability safeguards (HRS) methodology has been established for the safeguardability of advanced nuclear energy systems (NESs). HRS is being developed in order to integrate safety, security, and safeguards concerns, while also optimizing these with operational goals for facilities that handle special nuclear material (SNM). Currently, a commercial pyroprocessing facility is used as an example system. One of the goals in the HRS methodology is to apply intrinsic features of the system to a design strategy. This current study investigates the thickness of the hot cell walls that could adequately shield processed materials. This is an important design consideration that carries implications regarding the formation of material balance areas, the location of key measurement points, and material flow in the facility.

  2. Shielding practice

    Sauermann, P.F.

    1985-08-01

    The basis of shielding practice against external irradiation is shown in a simple way. For most sources of radiation (point sources) occurring in shielding practice, the basic data are given, mainly in the form of tables, which are required to solve the shielding problems. The application of these data is explained and discussed using practical examples. Thickness of shielding panes of glove boxes for α and β radiation; shielding of sealed γ-radiography sources; shielding of a Co-60 radiation source, and of the manipulator panels for hot cells; damping factors for γ radiation and neutrons; shielding of fast and thermal neutrons, and of bremsstrahlung (X-ray tubes, Kr-85 pressure gas cylinders, 42 MeV betatrons, 20 MeV linacs); two-fold shielding (lead glass windows for hot cells, 14 MeV neutron generators); shielding against scattered radiation. (orig./HP) [de

  3. ICRF Faraday shield plasma sheath models: Low and high conductivity limits

    Whealton, J.H.; Ryan, P.M.; Raridon, R.J.

    1989-01-01

    Using a 2-D nonlinear formulation which explicitly considers the plasma edge near a Faraday shield in a self consistent manner, progress is indicated in the modeling of the ion motion for a Faraday shield concept and model suggested by Perkins. Several models are considered which may provide significant insight into the impurities generation for ICRH antennas. 6 refs., 8 figs

  4. Especially for High School Teachers

    Howell, J. Emory

    1999-09-01

    Secondary School Feature Articles * Authentic Research within the Grasp of High School Students, by Annis Hapkiewicz, p 1212 * JCE Classroom Activity #19: Blueprint Photography by the Cyanotype Process, by Glen D. Lawrence and Stuart Fishelson, p 1216A Author Recognition A new program has been instituted to recognize high school teachers who are authors or coauthors of manuscripts published in the Journal. In May, letters were sent to teachers who wrote articles published in JCE beginning with Volume 74 (1997). If you were an author, you should have received a letter from us in late May or early June stating that your high school principal has been sent a Certificate of High School Author Recognition to be presented to you at a suitable occasion. Because the letters were sent late in the school year, you may not see the certificate until fall, or you may not receive your letter until then if we had only your school address. If you have authored or coauthored an article published in JCE and did not receive a letter, please contact me using the information about the Secondary School Chemistry Editor appearing on the Information Page in this issue. Syllabus Swap In the August issue, this column contained an invitation to exchange high school syllabi. The day after my copy of the August issue arrived, I received an email from a teacher indicating an interest in participating in an exchange. If you are interested, check the August "Especially for High School Chemistry Teachers" column for a brief discussion of the informal exchange program, or contact me. Research Conducted by High School Students In his June 1999 editorial "Learning Is a Do-It-Yourself Activity", p 725, John Moore wrote about the need to engage students actively in the learning process. As I have mentioned in this column previously, research conducted by students is one means of accomplishing this goal. In this issue, p 1212, Annis Hapkiewicz explains how she has drawn her Okemos [Michigan] High School

  5. Participation in Summer School and High School Graduation in the Sun Valley High School District

    Trujillo, Gabriel

    2012-01-01

    This study examines the effectiveness of a summer school credit recovery program in the Sun Valley High School District. Using logistic regression I assess the relationship between race, gender, course failure, school of origin and summer school participation for a sample of students that failed one or more classes in their first year of high…

  6. Carpet Aids Learning in High Performance Schools

    Hurd, Frank

    2009-01-01

    The Healthy and High Performance Schools Act of 2002 has set specific federal guidelines for school design, and developed a federal/state partnership program to assist local districts in their school planning. According to the Collaborative for High Performance Schools (CHPS), high-performance schools are, among other things, healthy, comfortable,…

  7. Accelerator shielding benchmark problems

    Hirayama, H.; Ban, S.; Nakamura, T.

    1993-01-01

    Accelerator shielding benchmark problems prepared by Working Group of Accelerator Shielding in the Research Committee on Radiation Behavior in the Atomic Energy Society of Japan were compiled by Radiation Safety Control Center of National Laboratory for High Energy Physics. Twenty-five accelerator shielding benchmark problems are presented for evaluating the calculational algorithm, the accuracy of computer codes and the nuclear data used in codes. (author)

  8. Evaluation of eye shields made of tungsten and aluminum in high-energy electron beams

    Weaver, Randi D.; Gerbi, Bruce J.; Dusenbery, Kathryn E.

    1998-01-01

    Purpose: To protect the lens and cornea of the eye when treating the eyelid with electrons, we designed a tungsten and aluminum eye shield that protected both the lens and cornea, and also limited the amount of backscatter to the overlying eyelid when using electron beam therapy. Methods and Materials: Custom curved tungsten eye shields, 2 mm and 3 mm thick, were placed on Kodak XV film on 8 cm polystyrene and irradiated to evaluate the transmission through the shields. To simulate the thickness of the eyelid and to hold the micro-TLDs, an aquaplast mold was made to match the curvature of the eye shields. Backscatter was measured by placing the micro-TLDs on the beam entrance side to check the dose to the underside of the eyelid. Measurements were done with no aluminum, 0.5, and 1.0 mm of aluminum on top of the tungsten eye shields. The measurements were repeated with 2- and 3-mm flat pieces of lead to determine both the transmission and the backscatter dose for this material. Results: Tungsten proved to be superior to lead for shielding the underlying structures and for reducing backscatter. At 6 MeV, a 3-mm flat slab of tungsten plus 0.5 mm of aluminum, resulted in .042 Gy under the shield when 1.00 Gy is delivered to d max . At 6 MeV for a 3-mm lead plus 0.5-mm aluminum, .046 Gy was measured beneath the shield, a 9.5% decrease with the tungsten. Backscatter was also decreased from 1.17 to 1.13 Gy, a 4% decrease, when using tungsten plus 0.5 mm of aluminum vs. the same thickness of lead. Measurements using 9 MeV were performed in the same manner. With 3 mm tungsten and 0.5 mm of aluminum, at 3 mm depth the dose was .048 Gy compared to .079 Gy with lead and aluminum (39% decrease). Additionally, the backscatter dose was 3% less using tungsten. Simulating the lens dose 3 mm beyond the shield for the 2-mm and 3-mm custom curved tungsten eye shields plus 0.5 mm of aluminum was .030 and .024 Gy, respectively, using 6 MeV (20% decrease). Using 9-MeV electrons, the dose

  9. Superconducting magnetic shields production. Realisation d'ecrans magnetiques supraconducteurs

    Lainee, F; Kormann, R [Thomson-CSF, Domaine de Corbeville, 91 - Orsay (FR); Lainee, F [Ecole des Mines de Paris, 91 - Evry (FR)

    1992-02-01

    Low fields and low frequency shielding properties of YBCO magnetic shields are measured at 77 K. They compare favourably with shielding properties of mumetal shields. Therefore high-T{sub c} superconducting magnetic shields can already be used to shield small volumes. The case of magnetic shields for large volumes is also discussed. 3 refs; 6 figs; 4 tabs.

  10. Credentialing high school psychology teachers.

    Weaver, Kenneth A

    2014-09-01

    The National Standards for High School Psychology Curricula (American Psychological Association, 2013b) require a teacher with considerable psychology content knowledge to teach high school psychology courses effectively. In this study, I examined the initial teaching credential requirements for high school psychology teachers in the 50 states plus the District of Columbia. Thirty-four states (the District of Columbia is included as a state) require the social studies credential to teach high school psychology. An analysis of the items on standardized tests used by states to validate the content knowledge required to teach social studies indicates little or no presence of psychology, a reflection of psychology's meager presence in the social studies teacher preparation curricula. Thus, new teachers with the social studies teaching credential are not prepared to teach high school psychology according to the National Standards. Approval of The College, Career, and Civic Life (C3) Framework for Social Studies State Standards: Guidance for Enhancing the Rigor of K-12 Civics, Economics, Geography, and History (National Council for the Social Studies, 2013) presents an opportunity to advocate for establishing a psychology credential in the 34 states. (c) 2014 APA, all rights reserved.

  11. Developmental testing of partially volatile neutron shields for high-performance shipping casks

    Pope, R.B.; Allen, G.C.; Rack, H.J.; Joseph, B.J.; Dupree, S.A.

    1980-01-01

    Results of the phase one tests have demonstrated that the neutron-shielding concept described in this paper is a viable design option for spent fuel shipping casks. The tests have shown that the Boro-silicone 236 shield is superior to the other shield materials considered. Repeated TGA, aging and fire tests demonstrated the reliability of the data. A second phase of the test program is now being pursued where the Boro-silicone 236 is injected into all-steel slab sections, and cured in place. 5 tables

  12. Bullying among High School Students

    Nursel TÜRKMEN, Delia; Halis DOKGÖZ, Mihai; Semra AKGÖZ, Suzana; Bülent EREN, Bogdan Nicolae; Pınar VURAL, Horatiu; Oğuz POLAT, Horatiu

    2013-01-01

    ABSTRACT Objective: The main aim of this research is to investigate the prevalence of bullying behaviour, its victims and the types of bullying and places of bullying among 14-17 year-old adolescents in a sample of school children in Bursa, Turkey. Methodology: A cross-sectional survey questionnaire was conducted among class 1 and class 2 high school students for identification bullying. Results: Majority (96.7%) of the students were involved in bullying behaviours as aggressors or victims. For a male student, the likelihood of being involved in violent behaviours was detected to be nearly 8.4 times higher when compared with a female student. Conclusion: a multidisciplinary approach involving affected children, their parents, school personnel, media, non-govermental organizations, and security units is required to achieve an effective approach for the prevention of violence targeting children in schools as victims and/or perpetrators. PMID:24371478

  13. High Kinetic Energy Penetrator Shielding and High Wear Resistance Materials Fabricated with Boron Nitride Nanotubes (BNNTS) and BNNT Polymer Composites

    Kang, Jin Ho (Inventor); Sauti, Godfrey (Inventor); Smith, Michael W. (Inventor); Jordan, Kevin C. (Inventor); Park, Cheol (Inventor); Bryant, Robert George (Inventor); Lowther, Sharon E. (Inventor)

    2015-01-01

    Boron nitride nanotubes (BNNTs), boron nitride nanoparticles (BNNPs), carbon nanotubes (CNTs), graphites, or combinations, are incorporated into matrices of polymer, ceramic or metals. Fibers, yarns, and woven or nonwoven mats of BNNTs are used as toughening layers in penetration resistant materials to maximize energy absorption and/or high hardness layers to rebound or deform penetrators. They can be also used as reinforcing inclusions combining with other polymer matrices to create composite layers like typical reinforcing fibers such as Kevlar.RTM., Spectra.RTM., ceramics and metals. Enhanced wear resistance and usage time are achieved by adding boron nitride nanomaterials, increasing hardness and toughness. Such materials can be used in high temperature environments since the oxidation temperature of BNNTs exceeds 800.degree. C. in air. Boron nitride based composites are useful as strong structural materials for anti-micrometeorite layers for spacecraft and space suits, ultra strong tethers, protective gear, vehicles, helmets, shields and safety suits/helmets for industry.

  14. Microstructure and pitting corrosion of shielded metal arc welded high nitrogen stainless steel

    Raffi Mohammed

    2015-09-01

    Full Text Available The present work is aimed at studying the microstructure and pitting corrosion behaviour of shielded metal arc welded high nitrogen steel made of Cromang-N electrode. Basis for selecting this electrode is to increase the solubility of nitrogen in weld metal due to high chromium and manganese content. Microscopic studies were carried out using optical microscopy (OM and field emission scanning electron microscopy (FESEM. Energy back scattered diffraction (EBSD method was used to determine the phase analysis, grain size and orientation image mapping. Potentio-dynamic polarization testing was carried out to study the pitting corrosion resistance in aerated 3.5% NaCl environment using a GillAC electrochemical system. The investigation results showed that the selected Cr–Mn–N type electrode resulted in a maximum reduction in delta-ferrite and improvement in pitting corrosion resistance of the weld zone was attributed to the coarse austenite grains owing to the reduction in active sites of the austenite/delta ferrite interface and the decrease in galvanic interaction between austenite and delta-ferrite.

  15. Studies on microstructure, mechanical and corrosion properties of high nitrogen stainless steel shielded metal arc welds

    Mohammed, Raffi; Madhusudhan Reddy, G.; Srinivasa Rao, K.

    2018-03-01

    The present work is aimed at studying the microstructure, mechanical and corrosion properties of high nitrogen stainless steel shielded metal arc (SMA) welds made with Cromang-N electrode. Basis for selecting this electrode is to increase the solubility of nitrogen in weld metal due to high chromium and manganese content. Microstructures of the welds were characterized using optical microscopy (OM), field emission scanning electron microscopy (FESEM) and electron back scattered diffraction (EBSD) mainly to determine the morphology, phase analysis, grain size and orientation image mapping. Hardness, tensile and ductility bend tests were carried out to determine mechanical properties. Potentio-dynamic polarization testing was carried out to study the pitting corrosion resistance using a GillAC basic electrochemical system. Constant load type testing was carried out to study stress corrosion cracking (SCC) behaviour of welds. The investigation results shown that the selected Cr–Mn–N type electrode resulted in favourable microstructure and completely solidified as single phase coarse austenite. Mechanical properties of SMA welds are found to be inferior when compared to that of base metal and is due to coarse and dendritic structure.

  16. Quantification of Fissile Materials by Photon Activation Method in a Highly Shielded Enclosure

    Dighe, P.M.; Pithawa, C.K.; Goswami, A.; Dixit, K.P.; Mittal, K.C.; Sunil, C.; Sarkar, P.K.; Mukhopadhyay, P.K.; Patil, R.K.; Srivastava, G.P.; Ganesan, S.; Venugopal, V.

    2010-01-01

    For active and non-destructive quantitative identification of heavily shielded fissile materials, photo fission is one of the most often used techniques. High energy photon beams can be conveniently generated with the help of electron LINACs. 10MeV energy electron LINACs are extensively used for various industrial applications such as food irradiation, X-ray radiography, etc. The radiological safety consideration favours the use of electron beam of upto 10 MeV energy. The photonuclear data available on 10 MeV end point energy is very scarce. The present paper gives the results of our initial experiments carried out using natural uranium samples at 10 MeV LINAC facility. Water cooled tantalum target converter was used to produce intense Bremsstrahlung to induce photofission in the samples. Neutron detection system consists of six numbers of high sensitivity Helium-3 proportional counters and gamma detection system consists of two numbers of 76 mm diameter BGO scintillators. Delayed neutron and delayed gamma radiations were measured and analyzed. The mass to count rate relationship has been established for both delayed neutron and gamma radiations. Delayed gamma decay constants of natural uranium have been derived for the 10 MeV end point energy. (author)

  17. Catholic High Schools and Rural Academic Achievement.

    Sander, William

    1997-01-01

    A study of national longitudinal data examined effects of rural Catholic high schools on mathematics achievement, high school graduation rates, and the likelihood that high school graduates attend college. Findings indicate that rural Catholic high schools had a positive effect on mathematics test scores and no effect on graduation rates or rates…

  18. Especially for High School Teachers

    Howell, J. Emory

    1999-12-01

    Chemistry and the Environment This issue contains more than 20 articles relating to the environment. Several articles of potential interest are indicated in the Table of Contents with the SSC mark (). Others are not so indicated because they depict use of expensive instrumentation or costly procedures, but if you have an interest in environmental chemistry you may wish to examine all the environmentally related articles. While many of the articles, both marked and unmarked, are targeted to college-level environmental chemistry curricula or to introductory courses for non-major, the methods described in several could be readily adapted to high school chemistry courses. One article likely to be of interest to teachers is found in News from Online, pp 1608-1609. The author explains how to use the U.S. Environment Protection Agency's EnviroMapper Web site to view and query environmental information. She mentioned finding a hazardous waste handler located near her home, so I decided to check the area near my home. I quickly located a natural gas salt dome storage facility marked on the map and, with a few more mouse clicks, I found information that included status of compliance with regulations, amounts of each compound released to the air in tons per year, and how to contact the corporation owning the site. Email and Web site addresses were included for the convenience of anyone wishing to contact the corporation. Students could learn a great deal about where they live that is relevant to chemistry by using the EPA site. Additional Web sites dealing with environmental issues and chemistry are cited in the sidebar at the bottom of p 1609. Among the articles that could be adapted to an advanced high school chemistry class or possibly even to an introductory class is one titled Bridge of Mandolin County (pp 1671-1672). It describes a case-study strategy similar to the scenarios used in ChemStudy. Students analyze information from various sources, including laboratory

  19. Chaos at High School

    Tamás Meszéna

    2017-04-01

    Full Text Available We are faced with chaotic processes in many segments of our life: meteorology, environmental pollution, financial and economic processes, sociology, mechanics, electronics, biology, chemistry. The spreading of high-performance computers and the development of simulation methods made the examination of these processes easily available. Regular, periodic motions (pendulum, harmonic oscillatory motion, bouncing ball, as taught at secondary level, become chaotic even due minor changes. If it is true that the most considerable achievements of twentieth century physics were the theory of relativity, quantum mechanics and chaos theory, then it is presumably time to think about, examine and test how and to what extent chaos can be presented to the students. Here I would like to introduce a 12 lesson long facultative curriculum framework on chaos designed for students aged seventeen. The investigation of chaos phenomenon in this work is based on a freeware, “Dynamics Solver”. This software, with some assistance from the teacher, is suitable for classroom use at secondary level.

  20. Highly Conductive 3D Segregated Graphene Architecture in Polypropylene Composite with Efficient EMI Shielding

    Fakhr E. Alam

    2017-12-01

    Full Text Available The extensive use of electronic equipment in modern life causes potential electromagnetic pollution harmful to human health. Therefore, it is of great significance to enhance the electrical conductivity of polymers, which are widely used in electronic components, to screen out electromagnetic waves. The fabrication of graphene/polymer composites has attracted much attention in recent years due to the excellent electrical properties of graphene. However, the uniform distribution of graphene nanoplatelets (GNPs in a non-polar polymer matrix like polypropylene (PP still remains a challenge, resulting in the limited improvement of electrical conductivity of PP-based composites achieved to date. Here, we propose a single-step approach to prepare GNPs/PP composites embedded with a segregated architecture of GNPs by coating PP particles with GNPs, followed by hot-pressing. As a result, the electrical conductivity of 10 wt % GNPs-loaded composites reaches 10.86 S·cm−1, which is ≈7 times higher than that of the composites made by the melt-blending process. Accordingly, a high electromagnetic interference shielding effectiveness (EMI SE of 19.3 dB can be achieved. Our method is green, low-cost, and scalable to develop 3D GNPs architecture in a polymer matrix, providing a versatile composite material suitable for use in electronics, aerospace, and automotive industries.

  1. Braille Goes to High School.

    Amato, Sheila

    2003-01-01

    This brief report describes the development and implementation of a unique, full-year, credit-bearing, technology course in literary Braille transcription offered at a Long Island (New York) high school. It describes the program's goals, development, implementation, students, ongoing activities, outreach efforts, and student attitudes. Suggestions…

  2. INSPIRED High School Computing Academies

    Doerschuk, Peggy; Liu, Jiangjiang; Mann, Judith

    2011-01-01

    If we are to attract more women and minorities to computing we must engage students at an early age. As part of its mission to increase participation of women and underrepresented minorities in computing, the Increasing Student Participation in Research Development Program (INSPIRED) conducts computing academies for high school students. The…

  3. Shielding plugs

    Makishima, Kenji.

    1986-01-01

    Purpose: In shielding plugs of an LMFBR type reactor, to restrain natural convection of heat in an annular space between a thermal shield layer and a shield shell, to prevent the lowering of heat-insulation performance, and to alleviate a thermal stress in a reactor container and the shield shell. Constitution: A ring-like leaf spring split in the direction of height is disposed in an annular space between a thermal shield layer and a shield shell. In consequence, the space is partitioned in the direction of height and, therefore, if axial temperature conditions and space width are the same and the space is low, the natural convection is hard to occur. Thus the rise of upper surface temperature of the shielding plugs can prevent the lowering of the heat insulation performance which will result in the increment of shielding plug cooling capacity, thereby improving reliability. In the meantime, since there is mounted an earthquake-resisting support, the thermal shield layer will move for a slight gap in case of an earthquake, being supported by the earthquake-resisting support, and the movement of the thermal shield layer is restricted, thereby maintaining integrity without increasing the stroke of the ring-like spring. (Kawakami, Y.)

  4. Especially for High School Teachers

    Emory Howell, J.

    1999-11-01

    many of our readers. The High School/College Interface Luncheon was part of the very rich day-long High School Program at the New Orleans ACS Meeting. Shown here (from left) are Glenn Crosby, the luncheon speaker; Lillie Tucker-Akin, the High School Day program chair; and Fred Johnson, Assistant Superintendent of Shelby County (TN) schools and Immediate Past President of NSTA. The recipient of the James Bryant Conant Award in High School Chemistry Teaching is Frank G. Cardulla, who taught for many years at Niles North High School, Skokie, Illinois. His extensive record of service to fellow teachers includes editing the JCE "View from My Classroom" feature for several years and writing several articles, as well as his recent appointment to the JCE Board of Publication. The recipient of the George C. Pimentel Award in Chemical Education is Jerry A. Bell of the American Chemical Society in Washington, DC. An author of numerous articles appearing in JCE and a member of the JCE Board of Publication for several years, he currently serves as Board Chair. The 16th Biennial Conference on Chemical Education Readers who attended the 15th BCCE in Waterloo, Ontario, know that much of the programming at these conferences is of interest to high school teachers. Many work shops, papers, and demonstrations are presented by high school teachers. There are many other outstanding papers and posters, plenary speakers, and exciting demonstrations. The 16th BCCE will be held at the University of Michigan in Ann Arbor, July 30-August 3, 2000. Among the high school teachers already scheduled to present workshops at the 16th BCCE are George Hague, Lynn Hershey, and Jack Randall, and there will be many more before the program is completed. The High School Chemistry Program Chair is Tim Graham, Roosevelt High School (MI). The Organizing Committee is seeking the assistance of local sections of the American Chemical Society within a 300-mile radius of Ann Arbor in providing support for high school

  5. Criticality safety and shielding design issues in the development of a high-capacity cask for truck transport

    Boshoven, J.K.

    1992-01-01

    General Atomics (GA) will be submitting an application for certification to the US Nuclear Regulatory Commission (NRC) for the GA-4 and GA-9 Casks In 1992. The GA-4 and GA-9 Casks are high-capacity legal weight truck casks designed to transport light water reactor spent fuel assemblies. To maintain a capacity of four pressurized-water-reactor (PWR) spent fuel assemblies, the GA-4 Cask uses burnup credit as part of the criticality control for initial enrichments over 3.0 wt% U-235. Using the US Department of Energy (DOE) Burnup Credit Program as a basis, GA has performed burnup credit analysis which is included in the Safety Analysis Report for Packaging (SARP). The GA-9 Cask can meet the criticality safety requirements using the ''fresh fuel'' assumption. Our approach to shielding design is to optimize the GA-4 and GA-9 Cask shielding configurations for minimum weights and maximum payloads. This optimization involves the use of the most effective shielding material, square cross-section geometry with rounded corners and tapered neutron shielding sections in the non-fuel regions

  6. Double-layer neutron shield design as neutron shielding application

    Sariyer, Demet; Küçer, Rahmi

    2018-02-01

    The shield design in particle accelerators and other high energy facilities are mainly connected to the high-energy neutrons. The deep penetration of neutrons through massive shield has become a very serious problem. For shielding to be efficient, most of these neutrons should be confined to the shielding volume. If the interior space will become limited, the sufficient thickness of multilayer shield must be used. Concrete and iron are widely used as a multilayer shield material. Two layers shield material was selected to guarantee radiation safety outside of the shield against neutrons generated in the interaction of the different proton energies. One of them was one meter of concrete, the other was iron-contained material (FeB, Fe2B and stainless-steel) to be determined shield thicknesses. FLUKA Monte Carlo code was used for shield design geometry and required neutron dose distributions. The resulting two layered shields are shown better performance than single used concrete, thus the shield design could leave more space in the interior shielded areas.

  7. School-Within-A-School (Hawaii Nui High) Hilo High School Report 1969-70.

    Hawaii Univ., Honolulu. Social Welfare Development and Research Center.

    The second year of operation of Hilo High School's "School-Within-A-School" [SWS] program is evaluated in this paper. Planning, training, and program implementation are described in the document. The following are the results of the program: There was an improvement in attendance among project students when compared to their record in…

  8. Middle School Concept Helps High-Poverty Schools Become High-Performing Schools

    Picucci, Ali Callicoatte; Brownson, Amanda; Kahlert, Rahel; Sobel, Andrew

    2004-01-01

    The results of a study conducted by the Charles A. Dana Center at the University of Texas at Austin for the U.S. Department of Education during the 2001-02 school year showed that elements of the middle school concept can lead to improved student performance, even in high-poverty schools. This article describes common elements of the middle school…

  9. Authoritative school climate and high school dropout rates.

    Jia, Yuane; Konold, Timothy R; Cornell, Dewey

    2016-06-01

    This study tested the association between school-wide measures of an authoritative school climate and high school dropout rates in a statewide sample of 315 high schools. Regression models at the school level of analysis used teacher and student measures of disciplinary structure, student support, and academic expectations to predict overall high school dropout rates. Analyses controlled for school demographics of school enrollment size, percentage of low-income students, percentage of minority students, and urbanicity. Consistent with authoritative school climate theory, moderation analyses found that when students perceive their teachers as supportive, high academic expectations are associated with lower dropout rates. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  10. High burn-up plutonium isotopic compositions recommended for use in shielding analysis

    Zimmerman, M.G.

    1977-06-01

    Isotopic compositions for plutonium generated and recycled in LWR's were estimated for use in shielding calculations. The values were obtained by averaging isotopic values from many sources in the literature. These isotopic values should provide the basis for a reasonable prediction of exposure rates from the range of LWR fuel expected in the future. The isotopic compositions given are meant to be used for shielding calculations, and the values are not necessarily applicable to other forms of analysis, such as inventory assessment or criticality safety. 11 tables, 2 figs

  11. Potential of Nanocellulose Composite for Electromagnetic Shielding

    Nabila Yah Nurul Fatihah

    2017-01-01

    Full Text Available Nowadays, most people rely on the electronic devices for work, communicating with friends and family, school and personal enjoyment. As a result, more new equipment or devices operates in higher frequency were rapidly developed to accommodate the consumers need. However, the demand of using wireless technology and higher frequency in new devices also brings the need to shield the unwanted electromagnetic signals from those devices for both proper operation and human health concerns. This paper highlights the potential of nanocellulose for electromagnetic shielding using the organic environmental nanocellulose composite materials. In addition, the theory of electromagnetic shielding and recent development of green and organic material in electromagnetic shielding application has also been reviewed in this paper. The use of the natural fibers which is nanocelllose instead of traditional reinforcement materials provides several advantages including the natural fibers are renewable, abundant and low cost. Furthermore, added with other advantages such as lightweight and high electromagnetic shielding ability, nanocellulose has a great potential as an alternative material for electromagnetic shielding application.

  12. Development of a highly sensitive current and position monitor with HTS squids and an HTS magnetic shield

    Watanabe, T.; Ikeda, T.; Kase, M.; Yano, Y.; Watanabe, S.; Sasaki, Y.; Kawaguchi, T.

    2005-01-01

    A highly sensitive current and position monitor with HTS (High-Temperature Superconducting) SQUIDs (Superconducting QUantum Interference Device) and an HTS magnetic shield for the measurement of the intensity of faint beams, such as a radioisotope beam, has been developed for the RIKEN RI beam factory project. The HTS magnetic shield and the HTS current sensor including the HTS SQUID are cooled by a low-vibration pulse-tube refrigerator. Both the HTS magnetic shield and the HTS current sensor were fabricated by dip-coating a thin Bi 2 -Sr 2 -Ca 2 -Cu 3 -O x (Bi-2223) layer on 99.9% MgO ceramic substrates. The HTS technology enables us to develop a system equipped with a downsized and highly sensitive current monitor. Recently, a prototype system was completed and installed in the beam transport line of the RIKEN Ring Cyclotron to measure the DC-current of high-energy heavy-ion beams. As a result, we succeeded in measuring the intensity of the 600 nA 40 Ar 17+ beam (95 MeV/u). We describe the present status of the monitor system and the results of the beam measurements. (author)

  13. Organic-inorganic hybrid optical foils with strong visible reflection, excellent near infrared-shielding ability and high transparency

    Zhou, Yijie; Huang, Aibin; Zhou, Huaijuan; Ji, Shidong; Jin, Ping

    2018-03-01

    Research on functional flexible films has recently been attracting widespread attention especially with regards to foils, which can be designed artificially on the basis of the practical requirements. In this work, a foil with high visible reflection and a strong near infrared shielding efficiency was prepared by a simple wet chemical method. In the process of making this kind of optical foil, emulsion polymerization was first introduced to synthesize polymer opals, which were further compressed between two pieces of polyethylene terephthalate (PET) foil under polymer melting temperature to obtain a photonic crystal film with a strong reflection in the visible region to block blue rays. The following step was to coat a layer of the inorganic nano paint, which was synthesized by dispersing Cs-doped WO3 (CWO) nanoparticles homogenously into organic resin on the surface of the PET to achieve a high near infrared shielding ability. The final composite foil exhibited unique optical properties such as high visible reflectance (23.9%) to block blue rays, and excellent near infrared shielding efficiency (98.0%), meanwhile it still maintained a high transparency meaning that this foil could potentially be applied in energy-saving window films. To sum up, this study provides new insight into devising flexible hybrid films with novel optical properties, which could be further extended to prepare other optical films for potential use in automobile, architectural and other decorative fields.

  14. Especially for High School Teachers

    Howell, J. Emory

    1999-08-01

    Care to Share? An Informal Syllabus Exchange A recent email message from Thomas Shiland, who teaches at Saratoga Springs Senior High School, noted that the process of revising the high school chemistry syllabus is underway in New York State. He expressed a strong interest in helping construct a chemistry syllabus that represents the best thinking about appropriate content. He wondered if it would be possible to develop a way in which different secondary chemistry syllabi could easily be exchanged. It is likely that readers from other states and countries are involved in a similar process and might also be interested in exchanging syllabi. Many states do not use the term syllabus to describe their guiding curricular document for chemistry but rather refer to it as a framework or as guidelines. In most cases, the document includes a list of key ideas or topics, performance indicators, and the major understandings associated with each key idea. Such documents would be appropriate for exchange among those of you involved in the revision process. If you are interested in arranging an exchange please contact me by email at j.e.howell@usm.edu or by mail at J. E. Howell, Box 5043, USM, Hattiesburg, MS39406-5043, USA. High School Day Information The High School Chemistry Program at the American Chemical Society National Meeting in New Orleans, Louisiana will be held Sunday, August 22, 1999, at the Doubletree Hotel, 300 Canal Street. If you wish to register only for the High School Day activities, which includes a pass to the ACS Exposition, a special registration form is available from Lillie Tucker-Akin, 2800 Reynard Dr., Tupelo, MS38801; sci4me@aol.com; fax: 662/566-7906. Advance registration is 25 and the cost of the High School Luncheon is 12. Register in advance by August 1, 1999, or from 7:45 to 8:30 a.m. at the High School Day table in the conference room area of the Doubletree. The workshop schedule is shown below. Secondary School Feature Articles * Exploring the

  15. Especially for High School Teachers

    Howell, J. Emory

    1999-07-01

    Secondary School Feature Articles * Super Science Connections, by Patricia B. McKean, p 916 * A pHorseshoe, by Roger Plumsky, p 935 National Conferences in Your Part of the Country For the past several months, considerable space in this column has been devoted to forthcoming national conferences and conventions and to highlights of conferences past. For some of us, location is fairly unimportant; but for most of us travel costs and time are both factors to consider when choosing a conference. The community of high school chemistry teachers is favored by the number of national conventions and conferences that are held each year in different locations. In 1999, for example, the spring National Meeting of the American Chemical Society was in Anaheim and the National Science Teachers Association National Convention was in Boston. This summer CHEMED '99 will be held in Fairfield, CT, August 1-5, and the fall National ACS Meeting will be in New Orleans. Teachers from the mid-South especially should consider attending the High School Program at New Orleans, described below by Lillie Tucker Akin, Chairperson of the Division's High School Program Committee. The event will be held on Sunday to minimize conflicts with the beginning of the school year. JCE at CHEMED '99 Stop by the JCE booth at CHEMED '99 in the exhibits area to learn more about the wide array of print and nonprint resources you can use in your classroom and laboratory. Members of the editorial staff will be on hand to talk with you. You are invited to participate in a workshop, "Promoting Active Learning through JCE Activity Sheets and Software", on Monday, August 1, 8:30-10:30. The free hands-on workshop is number WT11 and we encourage you to include it among your choices in the blanks provided on the third page of the registration form. We will also conduct an interactive session to listen to ideas for making the Journal more useful to you. Check the final program for location and time or inquire at the JCE

  16. Sexting by High School Students.

    Strassberg, Donald S; Cann, Deanna; Velarde, Valerie

    2017-08-01

    In the last 8 years, several studies have documented that many adolescents acknowledge having exchanged sexually explicit cell phone pictures of themselves, a behavior termed sexting. Differences across studies in how sexting was defined, recruitment strategies, and cohort have resulted in sometimes significant differences in as basic a metric as what percentage of adolescents have sent, received, or forwarded such sexts. The psychosocial and even legal risks associated with sexting by minors are significantly serious that accurate estimates of its prevalence, including over time, are important to ascertain. In the present study, students (N = 656) from a single private high school were surveyed regarding their participation in sexting. Students at this same school were similarly surveyed four years earlier. In this second survey, reported rates of sending (males 15.8%; females 13.6%) and receiving (males 40.5%; females 30.6%) sexually explicit cell phone pictures (revealing genitals or buttocks of either sex or female breasts) were generally similar to those reported at the same school 4 years earlier. Rates of forwarding sexts (males 12.2%; females 7.6%) were much lower than those previously acknowledged at this school. Correlates of sexting in this study were similar to those reported previously. Overall, our findings suggest that sexting by adolescents (with the exception of forwarding) remains a fairly common behavior, despite its risks.

  17. Shielding container

    Darling, K.A.M.

    1981-01-01

    A shielding container incorporates a dense shield, for example of depleted uranium, cast around a tubular member of curvilinear configuration for accommodating a radiation source capsule. A lining for the tubular member, in the form of a close-coiled flexible guide, provides easy replaceability to counter wear while the container is in service. Container life is extended, and maintenance costs are reduced. (author)

  18. The study of high-boron steel and high-boron cast iron used for shield

    Pan Xuerong; Lu Jixin; Wen Yaozeng; Wang Zhaishu; Cheng Jiantin; Cheng Wen; Shun Danqi; Yu Jinmu

    1996-12-01

    The smelting, forging, heat-treatment technology and the mechanical properties of three kinds of high-boron steels (type 1: 0.5% boron; type 2: 0.5% boron and 4% or 2% nickel; type 3: 0.5% boron, 0.5% nickel and 0.5% molybdenum) were studied. The test results show that the technology for smelting, forging and heat-treatment (1050 degree C/0.5 h water cooled + 810 degree C/1 h oil cooled) in laboratory is feasible. Being sensitive to notch, the impact toughness of high-boron steel type 1 is not steady and can not meet the technology requirements on mechanical properties. The mechanical properties of both high-boron steel type 2 and type 3 can meet the technological requirements. The smelting technology of high-boron casting iron containing 0.5% boron was researched. The tests show that this casting iron can be smelted in laboratory and its properties can basically satisfy the technology requirements. (10 refs., 6 figs., 11 tab.)

  19. Fabrication of Radiation Shielding Glasses Based on Lead-free High Refractive Index Glasses Prepared from Local Sand

    Dararutana, Pisutti; Dutchaneepet, Jirapan; Sirikulrat, Narin

    2007-08-01

    Full text: Lead glasses that show high refractive index are the best know and most popular for radiation shielding. Due to harmful effects of lead and considering the health as well as the environmental issues, lead-free glasses were developed. In this work, content of Chumphon sand was fixed at 40 % (by weight) as a main composition but concentrations of BaCO3 were varied from 6 to 30 % (by weight). It was found that the absorption coefficient of the glass samples containing 30 % BaCO3 was 0.233 cm-1 for Ba-133. The density was also measured. It can be concluded that the prepared lead free glasses offered adequate shielding to gamma radiation in comparison with the lead ones. These glasses were one of the environmental friendly materials

  20. Indoor Air Quality in High Performance Schools

    High performance schools are facilities that improve the learning environment while saving energy, resources, and money. The key is understanding the lifetime value of high performance schools and effectively managing priorities, time, and budget.

  1. Complex of programs for calculating radiation fields outside plane protecting shields, bombarded by high-energy nucleons

    Gel'fand, E.K.; Man'ko, B.V.; Serov, A.Ya.; Sychev, B.S.

    1979-01-01

    A complex of programs for modelling various radiation situations at high energy proton accelerators is considered. The programs are divided into there main groups according to their purposes. The first group includes programs for preparing constants describing the processes of different particle interaction with a substanc The second group of programs calculates the complete function of particle distribution arising in shields under irradiation by high energy nucleons. Concrete radiation situations arising at high energy proton accelerators are calculated by means of the programs of the third group. A list of programs as well as their short characteristic are given

  2. Teaching Ethics to High School Students

    Pass, Susan; Willingham, Wendy

    2009-01-01

    Working with two teachers and thirty-four high school seniors, the authors developed procedures and assessments to teach ethics in an American high school civics class. This approach requires high school students to discover an agreement or convergence between Kantian ethics and virtue ethics. The authors also created an instrument to measure…

  3. How High School Students Select a College.

    Gilmour, Joseph E., Jr.; And Others

    The college selection process used by high school students was studied and a paradigm that describes the process was developed, based on marketing theory concerning consumer behavior. Primarily college freshmen and high school seniors were interviewed, and a few high school juniors and upper-level college students were surveyed to determine…

  4. Additive manufacturing of magnetic shielding and ultra-high vacuum flange for cold atom sensors.

    Vovrosh, Jamie; Voulazeris, Georgios; Petrov, Plamen G; Zou, Ji; Gaber, Youssef; Benn, Laura; Woolger, David; Attallah, Moataz M; Boyer, Vincent; Bongs, Kai; Holynski, Michael

    2018-01-31

    Recent advances in the understanding and control of quantum technologies, such as those based on cold atoms, have resulted in devices with extraordinary metrological performance. To realise this potential outside of a lab environment the size, weight and power consumption need to be reduced. Here we demonstrate the use of laser powder bed fusion, an additive manufacturing technique, as a production technique relevant to the manufacture of quantum sensors. As a demonstration we have constructed two key components using additive manufacturing, namely magnetic shielding and vacuum chambers. The initial prototypes for magnetic shields show shielding factors within a factor of 3 of conventional approaches. The vacuum demonstrator device shows that 3D-printed titanium structures are suitable for use as vacuum chambers, with the test system reaching base pressures of 5 ± 0.5 × 10 -10 mbar. These demonstrations show considerable promise for the use of additive manufacturing for cold atom based quantum technologies, in future enabling improved integrated structures, allowing for the reduction in size, weight and assembly complexity.

  5. Electromagnetic shield

    Miller, J.S.

    1987-01-01

    An electromagnetic shield is described comprising: closed, electrically-conductive rings, each having an open center; and binder means for arranging the rings in a predetermined, fixed relationship relative to each other, the so-arranged rings and binder means defining an outer surface; wherein electromagnetic energy received by the shield from a source adjacent its outer surface induces an electrical current to flow in a predetermined direction adjacent and parallel to the outer surface, through the rings; and wherein each ring is configured to cause source-induced alternating current flowing through the portion of the ring closest to the outer surface to electromagnetically induce an oppositely-directed current in the portion of the ring furthest from the surface, such oppositely-directed current bucking any source-induced current in the latter ring portion and thus reducing the magnitude of current flowing through it, whereby the electromagnetic shielding effected by the shield is enhanced

  6. Neutron shieldings

    Tarutani, Kohei

    1979-01-01

    Purpose: To decrease the stresses resulted by the core bendings to the base of an entrance nozzle. Constitution: Three types of round shielding rods of different diameter are arranged in a hexagonal tube. The hexagonal tube is provided with several spacer pads receiving the loads from the core constrain mechanism at its outer circumference, a handling head for a fuel exchanger at its top and an entrance nozzle for self-holding the neutron shieldings and flowing heat-removing coolants at its bottom. The diameters for R 1 , R 2 and R 3 for the round shielding rods are designed as: 0.1 R 1 2 1 and 0.2 R 1 2 1 . Since a plurality of shielding rods of small diameter are provided, soft structure are obtained and a plurality of coolant paths are formed. (Furukawa, Y.)

  7. Nuclear shields

    Linares, R.C.; Nienart, L.F.; Toelcke, G.A.

    1976-01-01

    A process is described for preparing melt-processable nuclear shielding compositions from chloro-fluoro substituted ethylene polymers, particularly PCTFE and E-CTFE, containing 1 to 75 percent by weight of a gadolinium compound. 13 claims, no drawings

  8. REACTOR SHIELD

    Wigner, E.P.; Ohlinger, L.E.; Young, G.J.; Weinberg, A.M.

    1959-02-17

    Radiation shield construction is described for a nuclear reactor. The shield is comprised of a plurality of steel plates arranged in parallel spaced relationship within a peripheral shell. Reactor coolant inlet tubes extend at right angles through the plates and baffles are arranged between the plates at right angles thereto and extend between the tubes to create a series of zigzag channels between the plates for the circulation of coolant fluid through the shield. The shield may be divided into two main sections; an inner section adjacent the reactor container and an outer section spaced therefrom. Coolant through the first section may be circulated at a faster rate than coolant circulated through the outer section since the area closest to the reactor container is at a higher temperature and is more radioactive. The two sections may have separate cooling systems to prevent the coolant in the outer section from mixing with the more contaminated coolant in the inner section.

  9. Activities of the Radiation Shielding Information Center and a report on codes/data for high energy radiation transport

    Roussin, R.W.

    1993-01-01

    From the very early days in its history Radiation Shielding Information Center (RSIC) has been involved with high energy radiation transport. The National Aeronautics and Space Administration was an early sponsor of RSIC until the completion of the Apollo Moon Exploration Program. In addition, the intranuclear cascade work of Bertini at Oak Ridge National Laboratory provided valuable resources which were made available through RSIC. Over the years, RSIC has had interactions with many of the developers of high energy radiation transport computing technology and data libraries and has been able to collect and disseminate this technology. The current status of this technology will be reviewed and prospects for new advancements will be examined

  10. School connectedness and high school graduation among maltreated youth.

    Lemkin, Allison; Kistin, Caroline J; Cabral, Howard J; Aschengrau, Ann; Bair-Merritt, Megan

    2018-01-01

    Maltreated youth have higher rates of school dropout than their non-maltreated peers. School connectedness is a modifiable predictor of school success. We hypothesized maltreated youth's school connectedness (supportive relationships with adults at school and participation in school clubs) would be positively associated with high school graduation. We included youth with at least one Child Protective Services (CPS) report by age twelve from Longitudinal Studies of Child Abuse and Neglect, a prospective cohort study. Participation in extracurricular activities and adult relationships reported at age 16, high school graduation/General Education Development (GED) status reported at age 18, and demographics were provided by youth and caregivers. Maltreatment data were coded from CPS records. The outcome was graduation/receipt of GED. Multivariable logistic regressions examined the association between school connectedness and graduation/receipt of GED, controlling for confounders. In our sample of 318 maltreated youth, 73.3% graduated. School club was the only activity with a statistically significant association with graduation in bivariate analysis. Having supportive relationships with an adult at school was not significantly associated with graduation, though only 10.7% of youth reported this relationship. Maltreated youth who participated in school clubs had 2.54 times the odds of graduating, adjusted for study site, gender, poverty status, caregiver high school graduation status, and age at first CPS report (95% CI: [1.02, 6.33]). Few maltreated youth reported relationships with adults at school, and additional efforts may be needed to support these vulnerable youth. School club participation may represent an opportunity to modify maltreated youth's risk for school dropout. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Teacher Accountability at High Performing Charter Schools

    Aguirre, Moises G.

    2016-01-01

    This study will examine the teacher accountability and evaluation policies and practices at three high performing charter schools located in San Diego County, California. Charter schools are exempted from many laws, rules, and regulations that apply to traditional school systems. By examining the teacher accountability systems at high performing…

  12. Especially for High School Teachers

    Howell, J. Emory

    2000-01-01

    Ideas and Resources in This Issue This issue contains a broad spectrum of topics of potential interest to high school teachers, including chemical safety, history, demonstrations, laboratory activities, electrochemistry, small group learning, and instructional software. In his report on articles published recently in The Science Teacher, Steve Long includes annotated references from that journal, and also from JCE, that provide timely and practical information (pp 21-22). The chemical significance of several anniversaries that will occur in the year 2000 are discussed in an article by Paul Schatz (pp 11-14). Scientists and inventors mentioned include Dumas, Wöhler, Goodyear, Joliot-Curie, Krebs, Pauli, Kjeldahl, and Haworth. Several discoveries are also discussed, including development of the voltaic pile, the use of chlorine to purify water, and the discovery of element 97, berkelium. This is the fourth consecutive year that Schatz has written an anniversaries article (1-3). Although most readers probably do not plan to be teaching in the years 2097-3000, these articles can make a nice addition to your file of readily available historical information for use now in meeting NSES Content Standard G (4). In contrast to the short historical summaries, an in-depth account of the work of Herman Boerhaave is provided by Trinity School (NY) teacher Damon Diemente. You cannot recall having heard of Boerhaave? Diemente explains in detail how Boerhaave's scientific observations, imperfect though they were, contributed significantly to the understanding of temperature and heat by scientists who followed him. Chemical demonstrations attract the interest of most of us, and Kathy Thorsen discusses several that appeared in Chem 13 News during the past year (pp 18-20). Included are demonstrations relating to LeChâtelier's principle, electronegativity, and the synthesis and reactions of carbon monoxide. Ideas for investigating the hydrophobic nature of Magic Sand are given in JCE

  13. Toolkit for high performance Monte Carlo radiation transport and activation calculations for shielding applications in ITER

    Serikov, A.; Fischer, U.; Grosse, D.; Leichtle, D.; Majerle, M.

    2011-01-01

    The Monte Carlo (MC) method is the most suitable computational technique of radiation transport for shielding applications in fusion neutronics. This paper is intended for sharing the results of long term experience of the fusion neutronics group at Karlsruhe Institute of Technology (KIT) in radiation shielding calculations with the MCNP5 code for the ITER fusion reactor with emphasizing on the use of several ITER project-driven computer programs developed at KIT. Two of them, McCad and R2S, seem to be the most useful in radiation shielding analyses. The McCad computer graphical tool allows to perform automatic conversion of the MCNP models from the underlying CAD (CATIA) data files, while the R2S activation interface couples the MCNP radiation transport with the FISPACT activation allowing to estimate nuclear responses such as dose rate and nuclear heating after the ITER reactor shutdown. The cell-based R2S scheme was applied in shutdown photon dose analysis for the designing of the In-Vessel Viewing System (IVVS) and the Glow Discharge Cleaning (GDC) unit in ITER. Newly developed at KIT mesh-based R2S feature was successfully tested on the shutdown dose rate calculations for the upper port in the Neutral Beam (NB) cell of ITER. The merits of McCad graphical program were broadly acknowledged by the neutronic analysts and its continuous improvement at KIT has introduced its stable and more convenient run with its Graphical User Interface. Detailed 3D ITER neutronic modeling with the MCNP Monte Carlo method requires a lot of computation resources, inevitably leading to parallel calculations on clusters. Performance assessments of the MCNP5 parallel runs on the JUROPA/HPC-FF supercomputer cluster permitted to find the optimal number of processors for ITER-type runs. (author)

  14. Primary shield displacement and bowing

    Scott, K.V.

    1978-01-01

    The reactor primary shield is constructed of high density concrete and surrounds the reactor core. The inlet, outlet and side primary shields were constructed in-place using 2.54 cm (1 in) thick steel plates as the forms. The plates remained as an integral part of the shields. The elongation of the pressure tubes due to thermal expansion and pressurization is not moving through the inlet nozzle hardware as designed but is accommodated by outward displacement and bowing of the inlet and outlet shields. Excessive distortion of the shields may result in gas seal failures, intolerable helium gas leaks, increased argon-41 emissions, and shield cooling tube failures. The shield surveillance and testing results are presented

  15. Calculations of the photon dose behind concrete shielding of high energy proton accelerators

    Dworak, D.; Tesch, K.; Zazula, J.M.

    1992-02-01

    The photon dose per primary beam proton behind lateral concrete shieldings was calculated by using an extension of the Monte Carlo particle shower code FLUKA. The following photon-producing processes were taken into account: capture of thermal neutrons, deexcitation of nuclei after nuclear evaporation, inelastic neutron scattering and nuclear reactions below 140 MeV, as well as photons from electromagnetic cascades. The obtained ratio of the photon dose to the neutron dose equivalent varies from 8% to 20% and it well compares with measurements performed recently at DESY giving a mean ratio of 14%. (orig.)

  16. A point kernel shielding code, PKN-HP, for high energy proton incident

    Kotegawa, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1996-06-01

    A point kernel integral technique code PKN-HP, and the related thick target neutron yield data have been developed to calculate neutron and secondary gamma-ray dose equivalents in ordinary concrete and iron shields for fully stopping length C, Cu and U-238 target neutrons produced by 100 MeV-10 GeV proton incident in a 3-dimensional geometry. The comparisons among calculation results of the present code and other calculation techniques, and measured values showed the usefulness of the code. (author)

  17. Middle School and High School Students Who Stutter: A Qualitative Investigation of School Experiences

    Cobb, Tiffany R.

    2017-01-01

    Purpose: The purpose of this study was to explore and further understand the ways in which middle school and high school students perceive their school experiences within the school environment. School has an important impact on the social development of children (Milsom, 2006). Learning is not done individually as classrooms are inherently social…

  18. Especially for High School Teachers

    Howell, J. Emory

    1999-02-01

    Secondary School Feature Articles * Building the Interest of High School Students for Science-A PACT Ambassador Program To Investigate Soap Manufacturing and Industrial Chemistry, by Matthew Lynch, Nicholas Geary, Karen Hagaman, Ann Munson, and Mark Sabo, p 191. * Promoting Chemistry at the Elementary Level, by Larry L. Louters and Richard D. Huisman, p 196. * Is It Real Gold? by Harold H. Harris, p 198. * The "Big Dog-Puppy Dog" Analogy for Resonance, by Todd P. Silverstein, p 206. * The Fizz Keeper, a Case Study in Chemical Education, Equilibrium, and Kinetics, by Reed A. Howald, p 208. Staying on Top: Curricular Projects, Relativistic Effects, and Standard-State Pressure You may wonder why some articles are identified with the Secondary School Chemistry logo (*) this month even though at first glance they appear to be of greater interest to college faculty.1 The three articles discussed below are representative of three broad categories: (i) the interrelatedness of science teaching and learning, K-16+; (ii) new understandings of chemical phenomena; and (iii) information about the use of SI units. For each article I have highlighted the major point(s) and the reasons it may be of interest to high school teachers. First, the article "The NSF 'Systemic' Projects- A New Tradition" (G. M. Barrow, p 158) is a commentary on changes in post-secondary introductory chemistry courses in which a distinction is drawn between information management and individual understanding. The author is of the opinion that most students expect the former and that the NSF-funded systemic projects "will thrive only if they are consistent with their information-management mission". Three individuals provided responses to the commentary from their perspective. Has a student asked you why mercury is a liquid, or why gold is the most electronegative metal? "Gold Chemistry: The Aurophilic Attraction" by J. Bardají and A. Laguna (p 201) and "Why Gold and Copper Are Colored but Silver Is Not" by

  19. Schools or Students? Identifying High School Effects on Student Suspensions

    Baker-Smith, E. Christine

    2015-01-01

    Evidence is clear that discipline in high school is associated with negative outcomes across the life course. Not only are suspensions related to declining academic trajectories during high school in the form of attendance and academic achievement, students suspended once are also more likely to be suspended again and also substantially increase…

  20. Especially for High School Teachers

    Howell, J. Emory

    1999-10-01

    Writing Across the Curriculum The notion that student learning is enhanced through writing is widely accepted at all educational levels if the product is fairly assessed and the learner is provided with feedback. Finding the time to critically evaluate student papers is difficult at best and competes with time needed to prepare laboratory investigations. A few weeks ago a teacher who has extensive extracurricular responsibilities that include extensive interaction with parents and community members shared with me his frustration in not being able to grade written reports. This teacher is the head football coach at his school, but many readers experience the same difficulties due to a variety of duties. There are no easy or completely satisfying answers to this problem, but this issue contains an account of a successful approach (Writing in Chemistry: An Effective Learning Tool, pp 1399-1403). Although they are based on experience in college courses, several ideas described in the article could be applied in high school chemistry courses. In another article, the author of Precise Writing for a Precise Science (pp 1407-1408) identifies 20 examples of familiar, but incorrect, grammatical constructions and explains how to phrase each one correctly. Chemical Education Research: Improving Chemistry Learning The results from research on how students learn have greatly increased our understanding of cognition in recent years. However, the results are often published in the science education research literature and are not readily accessible to the classroom teacher. Additionally, the research reports are couched in specialized terminology. This issue contains a Viewpoints article (pp 1353-1361) that bridges the gap between research results and classroom application. It was written by two veteran chemical educators, Dudley Herron and Susan Nurrenbern. The shift from behaviorism to constructivism as the dominant theory of learning is described briefly to provide a context

  1. Characteristics of background radiation behind one-dimensional radiation shielding of high-energy particle beams; Kharakteristiki fonovogo izlucheniya za odnomernymi radiatsionnymi zashchitami puchkov vysokoehnergeticheskikh chastits

    Gorbatkov, D V; Kryuchkov, V P

    1994-12-31

    The calculational investigations of component, spatial and energy distributions of background radiation behind radiation shielding of high-energy hadron beams were carried out. The relations between different ingredients of radiation have been obtained. The numerous data of spatial and energy distribution of protons, neutrons, pions and photons in homogeneous and heterogeneous shielding from concrete and iron, presented in the paper, can be used as a reference data. 23 refs., 50 figs.

  2. 3D carbon fiber mats/nano-Fe3O4 hybrid material with high electromagnetic shielding performance

    Zhan, Yingqing; Long, Zhihang; Wan, Xinyi; Zhang, Jiemin; He, Shuangjiang; He, Yi

    2018-06-01

    To obtain high-performance electromagnetic shielding materials, structure and morphology are two key factors. We here developed an efficient and facial method to prepare high-performance 3D carbon nanofiber mats (CFM)/Fe3O4 hybrid electromagnetic shielding materials. For this purpose, the CFM were chemically modified by mussel-inspired poly-dopamine coating, which were further used as templates for decoration of Fe3O4 nanoparticles via solvothermal route. It was found that the Fe3O4 nano-spheres with diameters of 200-250 nm were uniformly coated on the surface of 3D carbon nanofibers. More importantly, the morphology and structure of resulting 3D carbon nanofiber mats/Fe3O4 hybrids could be easily controlled by altering the experiment parameters, which were examined by FT-IR, XPS, TGA, XRD, SEM, and TEM. The measured magnetic properties showed that saturation magnetism and coercivity increased from 13.4 to 39.7 emu/g and 85.3 to 104.6 Oe, respectively. The lowest reflectivity of resulting hybrid was calculated to be -47 dB at 10.0 GHz (2.5 mm). In addition, the reflectivity of 3D carbon nanofiber mats/Fe3O4 hybrid was less than -25 dB in the range of 7-13 GHz. Moreover, the resulting 3D carbon nanofiber mats/Fe3O4 hybrid exhibited an EMI shielding performance of -62.6 dB in the frequency range of 8.2-12.4 GHz. Therefore, 3D carbon fiber mats/Fe3O4 hybrids can be ideal EMI materials with strong absorption, low density, and wide absorption range.

  3. Especially for High School Teachers

    Howell, J. Emory

    1999-05-01

    assigned as a take-home activity. JCE Classroom Activity #15, "Liver and Onions: DNA Extraction from Animal and Plant Tissues" (p 400A, March 1999) also integrates chemical and biological concepts. The JCE Software videotape HIV-1 Protease: An Enzyme at Work is another useful resource. It can be used in any classroom where kinetics, catalysis, proteins, or enzymes are discussed. Information about JCE Software products can be found in recent issues of the Journal or by accessing JCE Online (http://jchemed.chem.wisc.edu). Because most high school students complete at least one year of biology before enrolling in chemistry, developing the connections between biology and chemistry can be especially productive. Connections between chemistry and biology often seem to be more real to students than do many of the phenomena we cite as applications. For example, students often are not able to make the connection between the excitation of electrons to produce electromagnetic radiation and anything that is personally relevant. The light given off by sodium or mercury vapor lights provides a common example of relating atomic emission to a useful process, but many students do not seem to find that particularly interesting. The need to make a connection between biology and chemistry becomes especially meaningful to students when the chemical change occurs within the human body. As an example, the interaction of emitted electromagnetic radiation with human cells to cause well-tanned skin seems more relevant to a greater number of students than the color of lights in a parking lot. This issue contains an article that describes a useful application of light to kill cancer cells through use of photosensitizers (p 592). The process of photodynamic therapy (PDT) provides another example that could help students make a connection between the emission of electromagnetic radiation and the challenge of killing cancer cells without harming healthy cells. Certainly this example is not a magic

  4. When and Why Dropouts Leave High School

    Stearns, Elizabeth; Glennie, Elizabeth J.

    2006-01-01

    Teens may leave school because of academic failure, disciplinary problems, or employment opportunities. In this article, the authors test whether the reasons dropouts leave school differ by grade level and age. We compare dropout rates and reasons across grade levels and ages for all high school students, ethnic groups, and gender groups. Across…

  5. Switching Schools: Reconsidering the Relationship Between School Mobility and High School Dropout

    Gasper, Joseph; DeLuca, Stefanie; Estacion, Angela

    2014-01-01

    Youth who switch schools are more likely to demonstrate a wide array of negative behavioral and educational outcomes, including dropping out of high school. However, whether switching schools actually puts youth at risk for dropout is uncertain, since youth who switch schools are similar to dropouts in their levels of prior school achievement and engagement, which suggests that switching schools may be part of the same long-term developmental process of disengagement that leads to dropping out. Using data from the National Longitudinal Survey of Youth 1997, this study uses propensity score matching to pair youth who switched high schools with similar youth who stayed in the same school. We find that while over half the association between switching schools and dropout is explained by observed characteristics prior to 9th grade, switching schools is still associated with dropout. Moreover, the relationship between switching schools and dropout varies depending on a youth's propensity for switching schools. PMID:25554706

  6. Evaluation of three partially volatile neutron shields for high-performance shipping casks

    Rack, H.J.; Pearson, H.S.

    1981-02-01

    The thermal stability and mechanical behavior of three partially volatile candidate neutron shield materials have been evaluated. The results indicate that silicone based rubbers, impregnated with elemental boron or boron carbide, Boro-silicone 236 and Bisco NS-I respectively are more thermally stable than are borated beechwoods, e.g., Permali JN. Mechanical property measurements indicated however that the compressive strength of the borated beechwood is 10 to 48 times higher than that of the silicone-based rubbers. The compressive strengths of the borated beechwood and boron carbide impregnated silicone rubber were substantially more sensitive to test temperature than was the compressive strength of the boron impregnated silicone rubber. Finally the compressive strengths and energy absorbing capability of the boron impregnated silicone rubber is not affected by prior thermal exposure at 425 0 K for 1000h

  7. Application of shielding calculation of high-energy linear accelerators based on the NCRP-151 protocol

    Torres Pozas, S.; Monja Rey, P. de la; Sanchez Carrasca, M.; Yanez Lopez, D.; Macias Verde, D.; Martin Oliva, R.

    2011-01-01

    In recent years, the progress experienced in cancer treatment with ionizing radiation can deliver higher doses to smaller volumes and better shaped, making it necessary to take into account new aspects in the calculation of structural barriers. Furthermore, given that forecasts suggest that in the near future will install a large number of accelerators, or existing ones modified, we believe a useful tool to estimate the thickness of the structural barriers of treatment rooms. The shielding calculation methods are based on standard DIN 6847-2 and the recommendations given by the NCRP 151. In our experience we found only estimates originated from the DIN. Therefore, we considered interesting to develop an application that incorporates the formulation suggested by the NCRP, together with previous work based on the rules DIN allow us to establish a comparison between the results of both methods. (Author)

  8. Development of approximate shielding calculation method for high energy cosmic radiation on LEO satellites

    Sin, M. W.; Kim, M. H.

    2002-01-01

    To calculate total dose effect on semi-conductor devices in satellite for a period of space mission effectively, two approximate calculation models for a comic radiation shielding were proposed. They are a sectoring method and a chord-length distribution method. When an approximate method was applied in this study, complex structure of satellite was described into multiple 1-dimensional slabs, structural materials were converted to reference material(aluminum), and the pre-calculated dose-depth conversion function was introduced to simplify the calculation process. Verification calculation was performed for orbit location and structure geometry of KITSAT-1 and compared with detailed 3-dimensional calculation results and experimental values. The calculation results from approximate method were estimated conservatively with acceptable error. However, results for satellite mission simulation were underestimated in total dose rate compared with experimental values

  9. Development of approximate shielding calculation method for high energy cosmic radiation on LEO satellites

    Sin, M. W.; Kim, M. H. [Kyunghee Univ., Yongin (Korea, Republic of)

    2002-10-01

    To calculate total dose effect on semi-conductor devices in satellite for a period of space mission effectively, two approximate calculation models for a comic radiation shielding were proposed. They are a sectoring method and a chord-length distribution method. When an approximate method was applied in this study, complex structure of satellite was described into multiple 1-dimensional slabs, structural materials were converted to reference material(aluminum), and the pre-calculated dose-depth conversion function was introduced to simplify the calculation process. Verification calculation was performed for orbit location and structure geometry of KITSAT-1 and compared with detailed 3-dimensional calculation results and experimental values. The calculation results from approximate method were estimated conservatively with acceptable error. However, results for satellite mission simulation were underestimated in total dose rate compared with experimental values.

  10. Multicurie, transportable, integrally shielded 123Xe → 123I generator and processing system for high-purity iodine-123 production

    Lagunas-Solar, M.C.; Thibeau, H.L.; Goodart, C.E.; Little, F.E.; Navarro, N.J.; Hartnett, D.E.

    1985-01-01

    An integrally shielded 123 Xe → 123 I generator system has been designed and tested under production conditions for its suitability as a multicurie handling device from which to produce radiopharmaceutical-quality high-purity no-carrier-added (NCA) 123 I. The 123 Xe → 123 I generator system is expected to provide an alternative to current techniques and to increase the availability and reliability of high-purity 123 I made via the 127 I(p,5n) 123 Xe → 123 I nuclear reaction. The generator system is based on the Crocker Nuclear Laboratory's continuous-flow production system which has been operating since 1974 for the multicurie production of 123 I. The generator system, which consists of an integrally shielded xenon trap and separate loading and processing apparatuses, is simple and reliable to operate, can be adapted to computerized control, and provides a safe working environment for the repeated handling of multicurie amounts of Xe-I radioactivities

  11. Demographic Factors Affecting Internet Using Purposes of High School Students

    Kilic, Abdullah Faruk; Güzeller, Cem Oktay

    2017-01-01

    This study aimed at determining the impact of demographic factors on the Internet usage purposes of high school students. The population of the study consisted of students between 9th and 12th grades from the Anatolian high schools, science high schools, social sciences high schools, sports high schools and fine arts high schools in Turkey. The…

  12. School-Related Factors Affecting High School Seniors' Methamphetamine Use

    Stanley, Jarrod M.; Lo, Celia C.

    2009-01-01

    Data from the 2005 Monitoring the Future survey were used to examine relationships between school-related factors and high school seniors' lifetime methamphetamine use. The study applied logistic regression techniques to evaluate effects of social bonding variables and social learning variables on likelihood of lifetime methamphetamine use. The…

  13. Especially for High School Teachers

    Howell, J. Emory

    1999-04-01

    Secondary School Feature Articles * Amino Acid Wordsearch, by Terry L. Helser, p 495. Games, Puzzles, and Humor In honor of April Fools' Day this issue contains 22 pages devoted to games and puzzles that can be used to teach aspects of chemistry. Most are designed for high school and first-year college students. The lead article, p 481, contains an annotated bibliography of chemistry games, complete with a vendor list. Many of the annotated games must be purchased, but the other articles that follow in this issue describe some games and puzzles that require minimal preparation using a word processor and readily available materials. Actually, JCE has a long tradition of publishing games and puzzles for chemistry teachers and their students. Read the letter by Helser and the Editor's response, p 468, for some recent background. Not having counted articles over past years, I became curious and turned to the online index, accessed by way of http://jchemed.chem.wisc.edu/. Because I wanted to search the entire 75-year life of the Journal, I searched titles for the words "game", "puzzle", and "humor" and obtained a total of 85 hits from the three searches. After eliminating titles of articles that were not applicable, I found that at least 25 games, 48 puzzles, and 5 humor articles have appeared during the past 75 years. At an average of one per year, the JCE editors hardly can be accused of frivolity, but game, puzzle, and humor articles have been published. The term "game" did not appear in any titles during 1945-1970, "puzzle" did not appear from 1927 to 1953, and there was no mention of humor (in the titles) prior to 1974. What appears to be the earliest article (1929) about a game was authored by an undergraduate student at the University of Colorado (1). It was titled "Chemical Bank", and the game pieces were tokens cut from cork stoppers. Wire hooks were inserted in the side of the token to represent valence electrons available for bonding. Carbon contained 4 hooks

  14. Gonadal shield.

    Purdy, J A; Stiteler, R D; Glasgow, G P; Mill, W B

    1975-10-01

    A secondary gonadal shield for use in the pelvic irradiation of males was designed and built using material and apparatus available with the Cerrobend blocking system. The gonadal dose was reduced to approximately 1.5 to 2.5% of the given dose.

  15. Experimental study of carbon materials behavior under high temperature and VUV radiation: Application to Solar Probe+ heat shield

    Eck, J.; Sans, J.-L.; Balat-Pichelin, M.

    2011-01-01

    The aim of the Solar Probe Plus (SP+) mission is to understand how the solar corona is heated and how the solar wind is accelerated. To achieve these goals, in situ measurements are necessary and the spacecraft has to approach the Sun as close as 9.5 solar radii. This trajectory induces extreme environmental conditions such as high temperatures and intense Vacuum Ultraviolet radiation (VUV). To protect the measurement and communication instruments, a heat shield constituted of a carbon material is placed on the top of the probe. In this study, the physical and chemical behavior of carbon materials is experimentally investigated under high temperatures (1600-2100 K), high vacuum (10 -4 Pa) and VUV radiation in conditions near those at perihelion for SP+. Thanks to several in situ and ex situ characterizations, it was found that VUV radiation induced modification of outgassing and of mass loss rate together with alteration of microstructure and morphology.

  16. Performance of advanced self-shielding models in DRAGON Version4 on analysis of a high conversion light water reactor lattice

    Karthikeyan, Ramamoorthy; Hebert, Alain

    2008-01-01

    A high conversion light water reactor lattice has been analysed using the code DRAGON Version4. This analysis was performed to test the performance of the advanced self-shielding models incorporated in DRAGON Version4. The self-shielding models are broadly classified into two groups - 'equivalence in dilution' and 'subgroup approach'. Under the 'equivalence in dilution' approach we have analysed the generalized Stamm'ler model with and without Nordheim model and Riemann integration. These models have been analysed also using the Livolant-Jeanpierre normalization. Under the 'subgroup approach', we have analysed Statistical self-shielding model based on physical probability tables and Ribon extended self-shielding model based on mathematical probability tables. This analysis will help in understanding the performance of advanced self-shielding models for a lattice that is tight and has a large fraction of fissions happening in the resonance region. The nuclear data for the analysis was generated in-house. NJOY99.90 was used for generating libraries in DRAGLIB format for analysis using DRAGON and A Compact ENDF libraries for analysis using MCNP5. The evaluated datafiles were chosen based on the recommendations of the IAEA Co-ordinated Research Project on the WIMS Library Update Project. The reference solution for the problem was obtained using Monte Carlo code MCNP5. It was found that the Ribon extended self-shielding model based on mathematical probability tables using correlation model performed better than all other models

  17. Attitudes of High School Students towards Geometry

    Esat Avcı

    2014-12-01

    Full Text Available In this research, attitudes of high school students towards geometry were investigated in terms of gender, grade, types of the field and school. Population of research includes students who were studying at high school in five distincs of Mersin in 2013-2014 academical year. Sample of research includes 935 students from twelve high schools. Attitude scale which was developed by Su-Özenir (2008 was used for data collection. For data analysis, mean, standart deviation, t test and ANOVA were used. A meaningful difference between students’ attitudes towards geometry and variance of gender and grade level wasn’t observed, on the other hand a meaningful difference according to field and school type is observed.Key Words:    Attitudes towards geometry, high school geometry lesson, attitude scale

  18. Measuring space radiation shielding effectiveness

    Bahadori Amir; Semones Edward; Ewert Michael; Broyan James; Walker Steven

    2017-01-01

    Passive radiation shielding is one strategy to mitigate the problem of space radiation exposure. While space vehicles are constructed largely of aluminum, polyethylene has been demonstrated to have superior shielding characteristics for both galactic cosmic rays and solar particle events due to the high hydrogen content. A method to calculate the shielding effectiveness of a material relative to reference material from Bragg peak measurements performed using energetic heavy charged particles ...

  19. The effect of high-scatter shielding geometries in validating the dose inferred by N-VisageTM - 16130

    Adams, Jamie C.; Joyce, Malcolm J.; Mellor, Matthew

    2009-01-01

    The aim of this paper is to further validate the physical capability of N-Visage TM under more challenging shielding geometries, when the number of mean free paths is greater than one. N-Visage TM is a recently established technique developed at REACT Engineering Ltd. The software locates radionuclide sources and contours radiation magnitude. The N-Visage TM software uses a geometric computer model combined with measured spectra. The software is able to estimate source locations through shielding materials by using mass attenuation coefficients to calculate the number of unscattered gamma photons arriving at the detector, and build-up factors to estimate scatter contribution to dose rate. The experiments described in this paper were carried out in a high-scatter environment using cobalt-60 and cesium- 137 sources, these two sources are the primary sources of radiological contamination found in the nuclear industry. It is hoped that this will further assist in the identification, characterisation and removal of buried radiologically contaminated waste. (authors)

  20. THE HIGH SCHOOL COUNSELOR BEFORE CONFLICTS AND THE SCHOOL VIOLENCE

    Rubén Sánchez-Carranza

    2016-01-01

    Full Text Available This article aims to reflect on the figure and role of high school counselor in the task of addressing conflict situations in which students are immersed. The existence of a rising tide of violence in school conflicts and how important it is to know what countries in Europe , Asia and Latin America is done to promote a culture of peace is recognized. What happened it is exposed in a high school in Germany and how questions from the critical eye that are applicable to our Mexican reality are issued. Finally, it highlights the importance of skills that the counselor must possess or develop to prevent school conflicts escalate to levels of violence.Finally experience working with the School counselors S033 about this subject area is described.

  1. The extreme condition analyzing for NEMPI shielding of electronic system in high-intensity pulsed radiation diagnosing

    Cheng Xiaolei; Liu Fang; Ouyang Xiaoping

    2012-01-01

    The difficulty for estimating the NEMPI (electromagnetic pulsed interference caused by the nuclear reaction) on the electronic system in high-intensity pulsed radiation diagnosing is analyzed in this article. To solve the difficulty, a method called 'Extreme Condition Analyzing' is presented for estimating the NEMPI conservatively and reliably. Through an extreme condition hypothesizing which could be described as 'Entire Coupling of Electric Field Energy', the E max (maximum electric field intensity which could be endured by the electronic system in the high-intensity pulsed radiation) could be figured out without any other information of the EMP caused by the nuclear reaction. Then a feasibility inspection is introduced, to confirm that the EMPI shielding request according to E max is not too extreme to be achieved. (authors)

  2. Trust, Behavior, and High School Outcomes

    Romero, Lisa S.

    2015-01-01

    Purpose: The purpose of this paper is to contribute to the literature on student trust and to examine the relationship between student trust, behavior, and academic outcomes in high school. It asks, first, does trust have a positive effect on high school outcomes? Second, does trust influence student behavior, exerting an indirect effect on…

  3. High School Redesign Gets Presidential Lift

    Adams, Caralee J.

    2013-01-01

    President Barack Obama applauded high school redesign efforts in his State of the Union address and encouraged districts to look to successful models for inspiration. Last week, he followed up with a request in his fiscal 2014 budget proposal for a new, $300 million competitive-grant program. Recognition is widespread that high schools need to…

  4. High School Students' Views on Blended Learning

    Yapici, Ibrahim Umit; Akbayin, Hasan

    2012-01-01

    In this study, it is aimed to determine the high school students' views on blended learning. The study was carried out in biology course for the lesson unit of "Classification of Living Things and Biodiversity" with 47 9[superscript th] grade students attending Nevzat Ayaz Anatolian High School in the second term of the academic year of…

  5. Dual Enrollment for High School Students

    Edwards, Linsey; Hughes, Katherine

    2011-01-01

    Dual enrollment programs allow high school students to enroll in college courses and potentially earn college credit. The term concurrent enrollment is sometimes used interchangeably with dual enrollment, and sometimes to refer to a particular model of dual enrollment. In some programs, students earn high school and college credit simultaneously;…

  6. National Standards for High School Psychology Curricula

    American Psychologist, 2013

    2013-01-01

    The "National Standards for High School Psychology Curricula" attempts to represent current knowledge in the field of psychology in developmentally appropriate ways. Psychology is a popular high school course, one that can introduce students to scientific ideas and engage students in the learning process. However, it is difficult for even the best…

  7. The Classification of Romanian High-Schools

    Ivan, Ion; Milodin, Daniel; Naie, Lucian

    2006-01-01

    The article tries to tackle the issue of high-schools classification from one city, district or from Romania. The classification criteria are presented. The National Database of Education is also presented and the application of criteria is illustrated. An algorithm for high-school multi-rang classification is proposed in order to build classes of…

  8. Midcentury Modern High Schools: Rebooting the Architecture

    Havens, Kevin

    2010-01-01

    A high school is more than a building; it's a repository of memories for many community members. High schools built at the turn of the century are not only cultural and civic landmarks, they are also often architectural treasures. When these facilities become outdated, a renovation that preserves the building's aesthetics and character is usually…

  9. Natural fibre high-density polyethylene and lead oxide composites for radiation shielding

    El-Sayed, A; Ismail, M R

    2003-01-01

    Study has been made of the radiation shielding provided by recycled agricultural fibre and industrial plastic wastes produced as composite materials. Fast neutron and gamma-ray spectra behind composites of fibre-plastic (rho = 1.373 g cm sup - sup 3) and fibre-plastic-lead (rho = 2.756 g cm sup - sup 3) have been measured using a collimated reactor beam and neutron-gamma spectrometer with a stilbene scintillator. The pulse shape discriminating technique based on the zero-cross-over method was used to discriminate between neutron and gamma-ray pulses. Slow neutron fluxes have been measured using a collimated reactor beam and BF sub 3 counter, leading to determination of the macroscopic cross-section (SIGMA). The removal cross-sections (SIGMA sub R) of fast neutrons have been determined from measured results and elemental composition of the composites. For gamma-rays, total linear attenuation coefficients (mu) and total mass attenuation coefficients (mu/rho) have been determined from use of the XCOM code and me...

  10. Pedagogical Stances of High School ESL Teachers: "Huelgas" in High School ESL Classrooms

    del Carmen Salazar, Maria

    2010-01-01

    This article presents a qualitative case study of the pedagogical stances of high school English as a Second Language (ESL) teachers, and the subsequent responses of resistance or conformity by their English Language Learners (ELLs). The participants include three high school ESL teachers and 60 high school ESL students of Mexican origin. Findings…

  11. The Relationship between High School Math Courses, High School GPA, and Retention of Honors Scholarships

    Megert, Diann Ackerman

    2005-01-01

    This research examined the high school transcripts of honors scholarship recipients to identify a better criterion for awarding scholarships than high school grade point average (GPA) alone. Specifically, this study compared the honors scholarship retention rate when the scholarship was awarded based on completed advanced high school math classes…

  12. Especially for High School Teachers

    Howell, J. Emory

    2000-05-01

    for You? The end of the school year is approaching quickly. In previous years, several readers have submitted manuscripts soon after the end of the school year, while ideas were fresh in their mind and there was relief from the demands of daily classes. If you have an idea for an article, I encourage you to think about writing as soon as the school term ends. I can probably guess what you are saying, "I don't have anything that readers would be interested in." This is a common reaction, to which we frequently respond by reminding high school teachers that this is "your journal" and the only way to ensure that topics of interest to you are considered or published is by your active participation. In this presidential election year I am reminded of the familiar sentiment, "I voted in the election, so I have earned the right to complain about the politicians." I do not wish to encourage complaining, but there is a relevant correlation. By submitting manuscripts to the Journal, you are ensuring that you will continue to get your money's worth because it will include topics of interest to you. When considering a submission, many prospective authors are overwhelmed at the thought of preparing a complete manuscript. Don't let that stop you. If you have an idea, an outline, or a rough draft, any of the feature editors or I would be happy to discuss it with you. This one-on-one interaction during the development process will help you express your ideas more effectively. Many teachers across the country who are faced with similar situations and problems each day would benefit from an article discussing innovative teaching strategies or a new way to look at principles we teach every year. As you begin to formulate your ideas, I would like to emphasize five features whose editors are fellow teachers: JCE Classroom Activities. An invitation for contributions was issued in the April issue of this column (JCE, 2000, 77, 431). Chemical Principles Revisited, edited by Cary Kilner

  13. Shielded container

    Fries, B.A.

    1978-01-01

    A shielded container for transportation of radioactive materials is disclosed in which leakage from the container is minimized due to constructional features including, inter alia, forming the container of a series of telescoping members having sliding fits between adjacent side walls and having at least two of the members including machine sealed lids and at least two of the elements including hand-tightenable caps

  14. Concussion Knowledge and Reporting Behavior Differences Between High School Athletes at Urban and Suburban High Schools.

    Wallace, Jessica; Covassin, Tracey; Nogle, Sally; Gould, Daniel; Kovan, Jeffrey

    2017-09-01

    We determined differences in knowledge of concussion and reporting behaviors of high school athletes attending urban and suburban high schools, and whether a relationship exists between underreporting and access to an athletic trainer in urban schools. High school athletes (N = 715) from 14 high schools completed a validated knowledge of concussion survey consisting of 83 questions. The independent variable was school type (urban/suburban). We examined the proportion of athletes who correctly identified signs and symptoms of concussion, knowledge of concussion and reasons why high school athletes would not disclose a potential concussive injury across school classification. Data were analyzed using descriptive, non-parametric, and inferential statistics. Athletes attending urban schools have less concussion knowledge than athletes attending suburban schools (p urban schools without an athletic trainer have less knowledge than urban athletes at schools with an athletic trainer (p urban schools and 10 reasons for not reporting. Concussion education efforts cannot be homogeneous in all communities. Education interventions must reflect the needs of each community. © 2017, American School Health Association.

  15. The Preparation of Schools for Serious School Violence: An Analysis of New Mexico Public High Schools

    DiMatteo, Henry

    2012-01-01

    This study surveyed New Mexico high school principals on their current state of preparedness for serious school violence. The researcher surveyed 119 public high schools, receiving a 65% return rate from a 25-question survey. Specifically, this study analyzed the relationships of three predictor variables: prevention, response, and building of…

  16. Neutron shielding material

    Nodaka, M.; Iida, T.; Taniuchi, H.; Yosimura, K.; Nagahama, H.

    1993-01-01

    From among the neutron shielding materials of the 'kobesh' series developed by Kobe Steel, Ltd. for transport and storage packagings, silicon rubber base type material has been tested for several items with a view to practical application and official authorization, and in order to determine its adaptability to actual vessels. Silicon rubber base type 'kobesh SR-T01' is a material in which, from among the silicone rubber based neutron shielding materials, the hydrogen content is highest and the boron content is most optimized. Its neutron shielding capability has been already described in the previous report (Taniuchi, 1986). The following tests were carried out to determine suitability for practical application; 1) Long-term thermal stability test 2) Pouring test on an actual-scale model 3) Fire test The experimental results showed that the silicone rubber based neutron shielding material has good neutron shielding capability and high long-term fire resistance, and that it can be applied to the advanced transport packaging. (author)

  17. Shielding properties of protective thin film coatings and blended concrete compositions for high level waste storage packages

    Fusco, Michael A.; Winfrey, Leigh; Bourham, Mohamed A.

    2016-01-01

    Highlights: • Measured linear attenuation coefficients are the same for bare and coated steels. • Gamma mean free path is much larger than coating thickness; buildup is negligible. • ‘Concrete-6’ reduces exposure rate outside spent fuel cask significantly over ordinary concrete. - Abstract: Various thin film coatings have been proposed to protect stainless steel high level waste (HLW) containers from premature failure due to localized corrosion, hydrogen embrittlement, and mechanical wear. These coatings include TiN, ZrO 2 , MoS 2 , TiO 2 , and Al 2 O 3 , to be deposited either in multiple layers or as a thicker, single-layer composite. Linear attenuation coefficients of these materials have been simulated using MicroShield and measured experimentally for various photon energies. Additionally, spent fuel casks with overpacks made of two different types of concrete were simulated to compare exposure rate at the cask surface. In the energy range that is significant for high level waste storage all coating materials possess very similar attenuation behavior. A specialty concrete, containing magnetite (Fe 3 O 4 ) and lead oxide (PbO), reduces the exposure rate at the outer surface of the overpack by several orders of magnitude. The higher-Z elements not present in ordinary concrete greatly increase attenuation of intermediate-energy gammas (0.4–1.0 MeV). The thin film coatings do not affect the shielding capabilities of the HLW packaging, as their total proposed thickness is nearly three orders of magnitude less than the mean free path (MFP) of the primary photons of interest.

  18. Should School Boards Discontinue Support for High School Football?

    Margolis, Lewis H; Canty, Greg; Halstead, Mark; Lantos, John D

    2017-01-01

    A pediatrician is asked by her local school board to help them decide whether to discontinue their high school football program. She reviews the available evidence on the risks of football and finds it hopelessly contradictory. Some scholars claim that football is clearly more dangerous than other sports. Others suggest that the risks of football are comparable to other sports, such as lacrosse, ice hockey, or soccer. She finds very little data on the long-term sequelae of concussions. She sees claims that good coaching and a school culture that prioritizes the health of athletes over winning can reduce morbidity from sports injuries. In this paper, 3 experts also review the evidence about sports risks and discuss what is known and not known about the science and the ethics of high school football. Copyright © 2017 by the American Academy of Pediatrics.

  19. Optimization of a partially non-magnetic primary radiation shielding for the triple-axis spectrometer PANDA at the Munich high-flux reactor FRM-II

    Pyka, N M; Rogov, A

    2002-01-01

    Monte Carlo simulations have been used to optimize the monochromator shielding of the polarized cold-neutron triple-axis spectrometer PANDA at the Munich high-flux reactor FRM-II. By using the Monte Carlo program MCNP-4B, the density of the total spectrum of incoming neutrons and gamma radiation from the beam tube SR-2 has been determined during the three-dimensional diffusion process in different types of heavy concrete and other absorbing material. Special attention has been paid to build a compact and highly efficient shielding, partially non-magnetic, with a total biological radiation dose of less than 10 mu Sv/h at its outsides. Especially considered was the construction of an albedo reducer, which serves to reduce the background in the experiment outside the shielding. (orig.)

  20. Analysis of Institutional Competitiveness of Junior High Schools through the Admission Test to High School Education

    Armendáriz, Joyzukey; Tarango, Javier; Machin-Mastromatteo, Juan Daniel

    2018-01-01

    This descriptive and correlational research studies 15,658 students from 335 secondary schools in the state of Chihuahua, Mexico, through the results of the examination of admission to high school education (National High School Admission Test--EXANI I from the National Assessment Center for Education--CENEVAL) on logical-mathematical and verbal…

  1. High school science fair and research integrity

    Dalley, Simon; Shepherd, Karen; Reisch, Joan

    2017-01-01

    Research misconduct has become an important matter of concern in the scientific community. The extent to which such behavior occurs early in science education has received little attention. In the current study, using the web-based data collection program REDCap, we obtained responses to an anonymous and voluntary survey about science fair from 65 high school students who recently competed in the Dallas Regional Science and Engineering Fair and from 237 STEM-track, post-high school students (undergraduates, 1st year medical students, and 1st year biomedical graduate students) doing research at UT Southwestern Medical Center. Of the post-high school students, 24% had competed in science fair during their high school education. Science fair experience was similar overall for the local cohort of Dallas regional students and the more diverse state/national cohort of post-high school students. Only one student out of 122 reported research misconduct, in his case making up the data. Unexpectedly, post-high school students who did not participate in science fair anticipated that carrying out science fair would be much more difficult than actually was the case, and 22% of the post-high school students anticipated that science fair participants would resort to research misconduct to overcome obstacles. No gender-based differences between students’ science fair experiences or expectations were evident. PMID:28328976

  2. Demographic Factors Affecting Internet Using Purposes of High School Students

    Abdullah Faruk Kılıç; Cem Oktay Güzeller

    2017-01-01

    This study aimed at determining the impact of demographic factors on the Internet usage purposes of high school students. The population of the study consisted of students between 9th and 12th grades from the Anatolian high schools, science high schools, social sciences high schools, sports high schools and fine arts high schools in Turkey. The sample was chosen through the stratified and cluster sampling procedure. The students were chosen randomly depending on the regions of their school at...

  3. Teaching Bioethics in High Schools

    Araújo, Joana; Gomes, Carlos Costa; Jácomo, António; Pereira, Sandra Martins

    2017-01-01

    Objective: The Bioethics Teaching in Secondary Education (Project BEST) aims to promote the teaching of bioethics in secondary schools. This paper describes the development and implementation of the programme in Portugal. Design: Programme development involved two main tasks: (1) using the learning tools previously developed by the US Northwest…

  4. Split School of High Energy Physics 2015

    2015-01-01

    Split School of High Energy Physics 2015 (SSHEP 2015) was held at the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture (FESB), University of Split, from September 14 to September 18, 2015. SSHEP 2015 aimed at master and PhD students who were interested in topics pertaining to High Energy Physics. SSHEP 2015 is the sixth edition of the High Energy Physics School. Previous five editions were held at the Department of Physics, University of Sarajevo, Bosnia and Herzegovina.

  5. Magnetic shielding for superconducting RF cavities

    Masuzawa, M.; Terashima, A.; Tsuchiya, K.; Ueki, R.

    2017-03-01

    Magnetic shielding is a key technology for superconducting radio frequency (RF) cavities. There are basically two approaches for shielding: (1) surround the cavity of interest with high permeability material and divert magnetic flux around it (passive shielding); and (2) create a magnetic field using coils that cancels the ambient magnetic field in the area of interest (active shielding). The choice of approach depends on the magnitude of the ambient magnetic field, residual magnetic field tolerance, shape of the magnetic shield, usage, cost, etc. However, passive shielding is more commonly used for superconducting RF cavities. The issue with passive shielding is that as the volume to be shielded increases, the size of the shielding material increases, thereby leading to cost increase. A recent trend is to place a magnetic shield in a cryogenic environment inside a cryostat, very close to the cavities, reducing the size and volume of the magnetic shield. In this case, the shielding effectiveness at cryogenic temperatures becomes important. We measured the permeabilities of various shielding materials at both room temperature and cryogenic temperature (4 K) and studied shielding degradation at that cryogenic temperature.

  6. Technology Leadership in Malaysia's High Performance School

    Yieng, Wong Ai; Daud, Khadijah Binti

    2017-01-01

    Headmaster as leader of the school also plays a role as a technology leader. This applies to the high performance schools (HPS) headmaster as well. The HPS excel in all aspects of education. In this study, researcher is interested in examining the role of the headmaster as a technology leader through interviews with three headmasters of high…

  7. Successful Transition to High School. Research Brief

    Education Partnerships, Inc., 2012

    2012-01-01

    What steps can be taken to assure that 8th graders make a successful transition to 9th grade? More students fail ninth grade than any other grade level. When middle school students took part in high school transition programs with a variety of different articulation activities, fewer students were retained in ninth grade. Ideally, these transition…

  8. Teacher Reflective Practice in Jesuit High Schools

    Klug, Joseph H.

    2010-01-01

    Teachers who engage in reflective practice are more effective and may encourage higher student achievement. The purpose of this study is to explore and describe the methods that teachers use in order to engage in reflective practice. Further, it is essential to gain an understanding of how schools, including Jesuit high schools, promote reflective…

  9. Cultures of Learning in Effective High Schools

    Tichnor-Wagner, Ariel; Harrison, Christopher; Cohen-Vogel, Lora

    2016-01-01

    Purpose: Research indicates that a culture of learning is a key factor in building high schools that foster academic achievement in all students. Yet less is known about which elements of a culture of learning differentiate schools with higher levels of academic performance. To fill this gap, this comparative case study examined the cultures of…

  10. High School Teachers' Identities: Constructing Civic Selves

    Obenchain, Kathryn M.; Balkute, Asta; Vaughn, Erin; White, Shannon

    2016-01-01

    Research suggests that teachers play a role in the type of citizenship education implemented in schools. The purpose of this qualitative case study was to explore how two high school teachers understood and enacted their civic identities as a dimension of their teacher identities. Findings suggest that factors contributing to an individual's civic…

  11. Scientific Literacy of High School Students.

    Lucas, Keith B.; Tulip, David F.

    This investigation was undertaken in order to establish the status of scientific literacy among three groups of secondary school students in four Brisbane, Australia high schools, and to reduce the apparent reticence of science teachers to evaluate students' achievement in the various dimensions of scientific literacy by demonstrating appropriate…

  12. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 8. High Tech High School

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  13. High School Students’ Social Media Addiction

    Deniz, Levent; Gürültü, Ercan

    2018-01-01

    Theaim of this study is to investigate high school students’ social mediaaddiction. The study was conducted with 473 students who were educated in2014-2015 academic year at 6 different schools in İstanbul, Eyüp disctrict.‘Social Media Addiction Scale’ developed by Tutgun, Ünal and Deniz (2015) wasused to determine the students’ social media addiction. The results in general showedthat high school students have a medium level social media addiction. Besides,it was also concluded that high scho...

  14. Demonstration of suppressed phonon tunneling losses in phononic bandgap shielded membrane resonators for high-Q optomechanics.

    Tsaturyan, Yeghishe; Barg, Andreas; Simonsen, Anders; Villanueva, Luis Guillermo; Schmid, Silvan; Schliesser, Albert; Polzik, Eugene S

    2014-03-24

    Dielectric membranes with exceptional mechanical and optical properties present one of the most promising platforms in quantum opto-mechanics. The performance of stressed silicon nitride nanomembranes as mechanical resonators notoriously depends on how their frame is clamped to the sample mount, which in practice usually necessitates delicate, and difficult-to-reproduce mounting solutions. Here, we demonstrate that a phononic bandgap shield integrated in the membrane's silicon frame eliminates this dependence, by suppressing dissipation through phonon tunneling. We dry-etch the membrane's frame so that it assumes the form of a cm-sized bridge featuring a 1-dimensional periodic pattern, whose phononic density of states is tailored to exhibit one, or several, full band gaps around the membrane's high-Q modes in the MHz-range. We quantify the effectiveness of this phononic bandgap shield by optical interferometry measuring both the suppressed transmission of vibrations, as well as the influence of frame clamping conditions on the membrane modes. We find suppressions up to 40 dB and, for three different realized phononic structures, consistently observe significant suppression of the dependence of the membrane's modes on sample clamping-if the mode's frequency lies in the bandgap. As a result, we achieve membrane mode quality factors of 5 × 10(6) with samples that are tightly bolted to the 8 K-cold finger of a cryostat. Q × f -products of 6 × 10(12) Hz at 300 K and 14 × 10(12) Hz at 8 K are observed, satisfying one of the main requirements for optical cooling of mechanical vibrations to their quantum ground-state.

  15. Fabrication, characterization and gamma rays shielding properties of nano and micro lead oxide-dispersed-high density polyethylene composites

    Mahmoud, Mohamed E.; El-Khatib, Ahmed M.; Badawi, Mohamed S.; Rashad, Amal R.; El-Sharkawy, Rehab M.; Thabet, Abouzeid A.

    2018-04-01

    Polymer composites of high-density polyethylene (HD-PE) filled with powdered lead oxide nanoparticles (PbO NPs) and bulk lead oxide (PbO Blk) were prepared with filler weight fraction [10% and 50%]. These polymer composites were investigated for radiation-shielding of gamma-rays emitted from radioactive point sources [241Am, 133Ba, 137Cs, and 60Co]. The polymer was found to decrease the heaviness of the shielding material and increase the flexibility while the metal oxide fillers acted as principle radiation attenuators in the polymer composite. The prepared composites were characterized by Fourier transform infrared spectrophotometer (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscope (SEM), Brunauer-Emmett-Teller surface area (BET) and field emission transmission electron microscope (FE-TEM). The morphological analysis of the assembled composites showed that, PbO NPs and PbO Blk materials exhibited homogenous dispersion in the polymer-matrix. Thermogravimetric analysis (TGA) demonstrated that the thermal-stability of HD-PE was enhanced in the presence of both PbO Blk and PbO NPs. The results declared that, the density of polymer composites was increase with the percentage of filler contents. The highest density value was identified as 1.652 g cm-3 for 50 wt% of PbO NPs. Linear attenuation coefficients (μ) have been estimated from the use of XCOM code and measured results. Reasonable agreement was attended between theoretical and experimental results. These composites were also found to display excellent percentage of heaviness with respect to other conventional materials.

  16. National standards for high school psychology curricula.

    2013-01-01

    The National Standards for High School Psychology Curricula attempts to represent current knowledge in the field of psychology in developmentally appropriate ways. Psychology is a popular high school course, one that can introduce students to scientific ideas and engage students in the learning process. However, it is difficult for even the best of teachers to present all of psychology in a single course for students who begin with virtually no formal knowledge of psychology. The standards presented here constitute the first of two reports in this issue of the American Psychologist (January 2013) representing recent American Psychological Association (APA) policies that support high-quality instruction in the teaching of high school psychology. These standards provide curricular benchmarks for student learning in the high school course.

  17. Electrostatic shielding of transformers

    De Leon, Francisco

    2017-11-28

    Toroidal transformers are currently used only in low-voltage applications. There is no published experience for toroidal transformer design at distribution-level voltages. Toroidal transformers are provided with electrostatic shielding to make possible high voltage applications and withstand the impulse test.

  18. A study of gamma shielding

    Roogtanakait, N.

    1981-01-01

    Gamma rays have high penetration power and its attenuation depends upon the thickness and the attenuation coefficient of the shield, so it is necessary to use the high density shield to attenuate the gamma rays. Heavy concrete is considered to be used for high radiation laboratory and the testing of the shielding ability and compressibility of various types of heavy concrete composed of baryte, hematite, ilmenite and galena is carried out. The results of this study show that baryte-ilmenite concrete is the most suitable for high radiation laboratory in Thailand

  19. Cost-efficient high performance polyetheretherketone/expanded graphite nanocomposites with high conductivity for EMI shielding application

    Goyal, R.K., E-mail: rkgoyal72@yahoo.co.in

    2013-10-01

    The cost efficient expanded graphite (EG) filled polyetheretherketone (PEEK) nanocomposites were prepared by hot pressing, which exhibited an electrical conductivity percolation threshold of 1.5 wt%. The electrical conductivity of the 1.5 wt% nanocomposite increased approximately eleven orders of magnitude than that of pure PEEK. The conductivities of 5 wt% and 10 wt% nanocomposites were increased to about 3.24 S cm{sup −1} and 12.3 S cm{sup −1}, respectively. Scanning electron microscope showed 3-dimensional conductive network of EG across the PEEK matrix. The significant increase in electrical conductivity of the nanocomposites leads to the tremendous increase in electromagnetic interference shielding effectiveness. - Highlights: • A sharp increase in conductivity was observed at 1.5 wt% EG content. • The conductivity of 10 wt% nanocomposites is about 12.3 S cm{sup −1}. • This conductivity is the highest among reported value in literature.

  20. UNH Project SMART 2017: Space Science for High School Students

    Smith, C. W.; Broad, L.; Goelzer, S.; Levergood, R.; Lugaz, N.; Moebius, E.

    2017-12-01

    Every summer for the past 26 years the University of New Hampshire (UNH) has run a month-long, residential outreach program for high school students considering careers in mathematics, science, or engineering. Space science is one of the modules. Students work directly with UNH faculty performing original work with real spacecraft data and hardware and present the results of that effort at the end of the program. This year the student research projects used data from the Messenger, STEREO, and Triana missions. In addition, the students build and fly a high-altitude balloon payload with instruments of their own construction. Students learn circuit design and construction, microcontroller programming, and core atmospheric and space science along with fundamental concepts in space physics and engineering. Our payload design has evolved significantly since the first flight of a simple rectangular box and now involves a stable descent vehicle that does not require a parachute. Our flight hardware includes an on-board flight control computer, in-flight autonomous control and data acquisition of multiple student-built instruments, and real-time camera images sent to ground. This year we developed, built and flew a successful line cutter based on GPS location information that prevents our payload from falling into the ocean while also separating the payload from the balloon remains for a cleaner descent. We will describe that new line cutter design and implementation along with the shielded Geiger counters that we flew as part of our cosmic ray air shower experiment. This is a program that can be used as a model for other schools to follow and that high schools can initiate. More information can be found at .

  1. CERN launches high-school internship programme

    Johnston, Hamish

    2017-07-01

    The CERN particle-physics lab has hosted 22 high-school students from Hungary in a pilot programme designed to show teenagers how science, technology, engineering and mathematics is used at the particle-physics lab.

  2. Junior High School Pupils' Perceptions of Air

    cce

    Abstract. The study examined Junior High School (JHS) pupils' ideas of the concept air. The ... Stavy (1991) reported that students in his physics class had ... Research studies found that even after having been taught the particulate theory and.

  3. Concrete shielding for nuclear ship 'Mutsu'

    Nagase, Tetsuo; Saito, Tetsuo

    1983-01-01

    The repair works of the shielding for the nuclear ship ''Mutsu'' were completed in August, 1982. For the primary shielding, serpentine concrete was adopted as it contains a large quantity of water required for neutron shielding, and in the secondary shielding at the upper part of the reactor containment vessel, the original shielding was abolished, and the heavy concrete (high water content, high density concrete) which is effective for neutron and gamma-ray shielding was newly adopted. In this report, the design and construction using these shielding concrete are outlined. In September, 1974, Mutsu caused radiation leak during the test, and the cause was found to be the fast neutrons streaming through a gap between the reactor pressure vessel and the primary shielding. The repair works were carried out in the Sasebo Shipyard. The outline of the repair works of the shielding is described. The design condition for the shielding, the design standard for the radiation dose outside and inside the ship, the method of shielding analysis and the performance required for shielding concrete are reported. The selection of materials, the method of construction and mixing ratio, the evaluation of the soundness and properties of concrete, and the works of placing the shielding concrete are outlined. (Kako, I.)

  4. Nuclear data for radiation shielding

    Miyasaka, Shunichi; Takahashi, Hiroshi.

    1976-01-01

    The third shielding expert conference was convened in Paris in Oct. 1975 for exchanging informations about the sensitivity evaluation of nuclear data in shielding calculation and integral bench mark experiment. The requirements about nuclear data presented at present from the field of nuclear design do not reflect sufficiently the requirements of shielding design, therefore it was the object to gather the requirements about nuclear data from the field of shielding. The nuclides used for shielding are numerous, and the nuclear data on these isotopes are required. Some of them cannot be ignored as the source of secondary γ-ray or in view of the radioactivation of materials. The requirements for the nuclear data of neutrons in the field of shielding are those concerning the reaction cross sections producing secondary γ-ray, the reaction cross sections including the production of secondary neutrons, elastic scattering cross sections, and total cross sections. The topics in the Paris conference about neutron shielding data are described, such as the methodology of sensitivity evaluation, the standardization of group constant libraries, the bench mark experiment on iron and sodium, and the cross section of γ-ray production. In the shielding of nuclear fission reactors, the γ-ray production owing to nuclear fission reaction is also important. In (d, t) fusion reactors, high energy neutrons are generated, and high energy γ-ray is emitted through giant E1 resonance. (Kako, I.)

  5. Radiation shielding cloth

    Ijiri, Yasuo; Fujinuma, Tadashi; Tamura, Shoji.

    1989-01-01

    Radiation shielding cloth having radiation shielding layers comprising a composition of inorganic powder of high specific gravity and rubber are excellentin flexibility and comfortable to put on. However, since they are heavy in the weight, operators are tired upon putting them for a long time. In view of the above, the radiation ray shielding layers are prepared by calendering sheets obtained by preliminary molding of the composition to set the variation of the thickness within a range of +15% to -0% of prescribed thickness. Since the composition of inorganic powder at high specific gravity and rubber used for radiation ray shielding comprises a great amount of inorganic powder at high specific gravity blended therein, it is generally poor in fabricability. Therefor, it is difficult to attain fine control for the sheet thickness by merely molding a composition block at once. Then, the composition is at first preliminarily molded into a sheet-like shape which is somewhat thickener than the final thickness and then finished by calendering, by which the thickness can be reduced in average as compared with conventional products while keeping the prescribed thickness and reducing the weight reduce by so much. (N.H.)

  6. High School Teacher Perceptions of Empowerment

    Jacobs, Tricia Susan

    2014-01-01

    As the responsibilities of principals become more complex and as accountability becomes more evident in K-12 cultures, it becomes increasingly important that high school principals be trained to empower teachers. This paper examined the research concerning the conditions of the empowerment of teachers. More specifically, it measured high school teachers' perspectives concerning their levels of empowerment by their principals based on the four domains of empowerment: meaning, competence, sel...

  7. The New Urban High School: A Practitioner's Guide.

    Big Picture Co., Cambridge, MA.

    In October 1996, the Big Picture Company set out to find six urban high schools that use school-to-work strategies as a lever for whole-school reform. In the schools finally selected for the New Urban High Schools Project, and in others examined for the study, "school-to-work" is a misnomer, because the majority of students are entering…

  8. Development of a nano-tesla magnetic field shielded chamber and highly precise AC-susceptibility measurement coil at μK temperatures

    Kumar, Anil; Prakash, Om; Ramakrishanan, S.

    2014-04-01

    A special sample measurement chamber has been developed to perform experiments at ultralow temperatures and ultralow magnetic field. A high permeability material known as cryoperm 10 and Pb is used to shield the measurement space consisting of the signal detecting set-up and the sample. The detecting setup consists of a very sensitive susceptibility coil wound on OFHC Cu bobbin.

  9. School lunch and snacking patterns among high school students: Associations with school food environment and policies

    Story Mary

    2005-10-01

    Full Text Available Abstract Objectives This study examined associations between high school students' lunch patterns and vending machine purchases and the school food environment and policies. Methods A randomly selected sample of 1088 high school students from 20 schools completed surveys about their lunch practices and vending machine purchases. School food policies were assessed by principal and food director surveys. The number of vending machines and their hours of operation were assessed by trained research staff. Results Students at schools with open campus policies during lunchtime were significantly more likely to eat lunch at a fast food restaurant than students at schools with closed campus policies (0.7 days/week vs. 0.2 days/week, p Conclusion School food policies that decrease access to foods high in fats and sugars are associated with less frequent purchase of these items in school among high school students. Schools should examine their food-related policies and decrease access to foods that are low in nutrients and high in fats and sugars.

  10. Highlighting High Performance: Whitman Hanson Regional High School; Whitman, Massachusetts

    2006-06-01

    This brochure describes the key high-performance building features of the Whitman-Hanson Regional High School. The brochure was paid for by the Massachusetts Technology Collaborative as part of their Green Schools Initiative. High-performance features described are daylighting and energy-efficient lighting, indoor air quality, solar and wind energy, building envelope, heating and cooling systems, water conservation, and acoustics. Energy cost savings are also discussed.

  11. Shielding structure analysis for LSDS facility

    Choi, Hong Yeop; Kim, Jeong Dong; Lee, Yong Deok; Kim, Ho Dong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The nuclear material (Pyro, Spent nuclear fuel) itself and the target material to generate neutrons is the LSDS system for isotopic fissile assay release of high intensity neutron and gamma rays. This research was performed to shield from various strong radiation. A shielding evaluation was carried out with a facilities model of LSDS system. The MCNPX 2.5 code was used and a shielding evaluation was performed for the shielding structure and location. The radiation dose based on the hole structure and location of the wall was evaluated. The shielding evaluation was performed to satisfy the safety standard for a normal person (1 μSv/h) and to use enough interior space. The MCNPX2.5 code was used and a dose evaluation was performed for the location of the shielding material, shielding structure, and hole structure. The evaluation result differs according to the shielding material location. The dose rate was small when the shielding material was positioned at the center. The dose evaluation result regarding the location of the shielding material was applied to the facility and the shielding thickness was determined (In 50 cm + Borax 5 cm + Out 45cm). In the existing hole structure, the radiation leak is higher than the standard. A hole structure model to prevent leakage of radiation was proposed. The general public dose limit was satisfied when using the concrete reinforcement and a zigzag structure. The shielding result will be of help to the facility shielding optimization.

  12. Shielding structure analysis for LSDS facility

    Choi, Hong Yeop; Kim, Jeong Dong; Lee, Yong Deok; Kim, Ho Dong

    2014-01-01

    The nuclear material (Pyro, Spent nuclear fuel) itself and the target material to generate neutrons is the LSDS system for isotopic fissile assay release of high intensity neutron and gamma rays. This research was performed to shield from various strong radiation. A shielding evaluation was carried out with a facilities model of LSDS system. The MCNPX 2.5 code was used and a shielding evaluation was performed for the shielding structure and location. The radiation dose based on the hole structure and location of the wall was evaluated. The shielding evaluation was performed to satisfy the safety standard for a normal person (1 μSv/h) and to use enough interior space. The MCNPX2.5 code was used and a dose evaluation was performed for the location of the shielding material, shielding structure, and hole structure. The evaluation result differs according to the shielding material location. The dose rate was small when the shielding material was positioned at the center. The dose evaluation result regarding the location of the shielding material was applied to the facility and the shielding thickness was determined (In 50 cm + Borax 5 cm + Out 45cm). In the existing hole structure, the radiation leak is higher than the standard. A hole structure model to prevent leakage of radiation was proposed. The general public dose limit was satisfied when using the concrete reinforcement and a zigzag structure. The shielding result will be of help to the facility shielding optimization

  13. Neutron transmission benchmark problems for iron and concrete shields in low, intermediate and high energy proton accelerator facilities

    Nakane, Yoshihiro; Sakamoto, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Hayashi, Katsumi [and others

    1996-09-01

    Benchmark problems were prepared for evaluating the calculation codes and the nuclear data for accelerator shielding design by the Accelerator Shielding Working Group of the Research Committee on Reactor Physics in JAERI. Four benchmark problems: transmission of quasi-monoenergetic neutrons generated by 43 MeV and 68 MeV protons through iron and concrete shields at TIARA of JAERI, neutron fluxes in and around an iron beam stop irradiated by 500 MeV protons at KEK, reaction rate distributions inside a thick concrete shield irradiated by 6.2 GeV protons at LBL, and neutron and hadron fluxes inside an iron beam stop irradiated by 24 GeV protons at CERN are compiled in this document. Calculational configurations and neutron reaction cross section data up to 500 MeV are provided. (author)

  14. Infinite slab-shield dose calculations

    Russell, G.J.

    1989-01-01

    I calculated neutron and gamma-ray equivalent doses leaking through a variety of infinite (laminate) slab-shields. In the shield computations, I used, as the incident neutron spectrum, the leakage spectrum (<20 MeV) calculated for the LANSCE tungsten production target at 90 degree to the target axis. The shield thickness was fixed at 60 cm. The results of the shield calculations show a minimum in the total leakage equivalent dose if the shield is 40-45 cm of iron followed by 20-15 cm of borated (5% B) polyethylene. High-performance shields can be attained by using multiple laminations. The calculated dose at the shield surface is very dependent on shield material. 4 refs., 4 figs., 1 tab

  15. High Hydrogen Thoraeus Rubber Gossamer Radiation Shielding for Human Protection, Phase I

    National Aeronautics and Space Administration — NanoSonic has recently developed ultra-lightweight, durable, high hydrogen containing Thoraeus Rubber™ nanocomposites that may serve as radiation protection for...

  16. 2003 International High-Level Radioactive Waste Management Conference Breached Drip Shield Test and Validation of a TSPA Sub-Model

    Walton, Z.P.; Kam, J.T.

    2002-01-01

    The Engineered Barrier System (EBS) represents the system of human engineered barriers in the isolation of high-level radioactive waste in the proposed repository at Yucca Mountain. It is designed to complement and enhance the natural barriers to isolate and prevent the transport of radionuclides into the surrounding environment. The transport mechanism most frequently postulated for radionuclides is liquid water flux that has penetrated the EBS through corrosion breaches in the drip shield and waste packages (WP). A water flux-splitting model is used to predict flow through WP and drip shield breaches and is documented in the ''EBS Radionuclide Transport Abstraction''. A future revision of the ''EBS Radionuclide Transport Abstraction'' will be one component of the total system performance assessment--license application (TSPA-LA) for the Yucca Mountain repository. The flux-splitting model is conservative based on the following assumptions: (1) Drip impact occurs without a loss of water mass. (2) Dripping flux falls exactly at the crown of the drip shield as opposed to different locations on the curved surface, which will effect splashing and flow patterns. (3) The flux passing through a drip shield patch is proportional to the ratio of the length of the penetration in the axial direction to the total axial length of the drip shield. In this assumption all fluid that drips and flows from the drip shield crown toward a penetration will be collected if the axial locations of the source and patch coincide. (4) The potential for evaporation is ignored. Because of these conservatisms, the current version of the flux-splitting model is incapable of accounting for water that has been splashed from the impact location, the deviation of water paths (rivulets) from the axis of impact, and water loss due to evaporation. This paper will present the results of a series of breached drip shield tests used to collect empirical data for the initial validation and further

  17. Who's Teaching What in High School Physics?

    White, Susan; Tyler, John

    2015-01-01

    During the 2012-13 school year, approximately 27,000 teachers taught at least one physics course in a U.S. high school. About one-third of those teachers have earned a degree in physics or physics education; the vast majority of the others have earned degrees in a variety of other science fields. About 53,000 physics classes were taught, ranging…

  18. High temperature glass thermal control structure and coating. [for application to spacecraft reusable heat shielding

    Stewart, D. A.; Goldstein, H. E.; Leiser, D. B. (Inventor)

    1983-01-01

    A high temperature stable and solar radiation stable thermal control coating is described which is useful either as such, applied directly to a member to be protected, or applied as a coating on a re-usable surface insulation (RSI). It has a base coat layer and an overlay glass layer. The base coat layer has a high emittance, and the overlay layer is formed from discrete, but sintered together glass particles to give the overlay layer a high scattering coefficient. The resulting two-layer space and thermal control coating has an absorptivity-to-emissivity ratio of less than or equal to 0.4 at room temperature, with an emittance of 0.8 at 1200 F. It is capable of exposure to either solar radiation or temperatures as high as 2000 F without significant degradation. When used as a coating on a silica substrate to give an RSI structure, the coatings of this invention show significantly less reduction in emittance after long term convective heating and less residual strain than prior art coatings for RSI structures.

  19. Cyberbullying Among Greek High School Adolescents.

    Gkiomisi, Athanasia; Gkrizioti, Maria; Gkiomisi, Athina; Anastasilakis, Dimitrios A; Kardaras, Panagiotis

    2017-05-01

    To investigate the presence of cyberbullying among Greek students and the efficacy of proposed preventive interventions. Three types of high schools (private, experimental and public) with different politics on on-line aggression were enrolled. All students of the aforementioned schools were asked to complete an anonymous questionnaire. Around 62 % of the high school students experienced cyberbullying by electronic means, especially by cell phone, mostly the public school students (p 0.008). The bully was a stranger in more than 40 % of the cases. Over 60 % of the victims had not seeked help but dealt with the attack on their own. Only 20 % of the victims manifested sleep or eating disorders, physical/ psychological symptoms or changes in their social life as a consequence of the cyber-attack. Cyberbullying is a usual phenomenon among high school students. The bully is frequently unacquainted to the victim. Most of the victims are not physically or psychologically affected by the cyber-attack and do not share the event with anyone. There was a slight difference in the response of the students to cyberbullying among the different school politics of on-line aggression.

  20. Multimodal Behavior Therapy: Case Study of a High School Student.

    Seligman, Linda

    1981-01-01

    A case study of a high school student concerned with weight problems illustrates multimodal behavior therapy and its use in a high school setting. Multimodal therapy allows the school counselor to maximize referral sources while emphasizing growth and actualization. (JAC)

  1. Superconductors in the High School Classroom

    Lincoln, James

    2017-01-01

    In this article, we discuss the behavior of high-temperature superconductors and how to demonstrate them safely and effectively in the high school or introductory physics classroom. Included here is a discussion of the most relevant physics topics that can be demonstrated, some safety tips, and a bit of the history of superconductors. In an effort…

  2. High School Teacher Perceptions of Empowerment

    Jacobs, Tricia S.

    2014-01-01

    As the responsibilities of principals become more complex and as accountability becomes more evident in K-12 cultures, it becomes increasingly important that high school principals be trained to empower teachers. This paper examined the research concerning the conditions of the empowerment of teachers. More specifically, it measured high school…

  3. Global Ethics in a High School Curriculum.

    Sappir, Susan

    1998-01-01

    Raphi Amram, the late director of Israel's Society for Excellence Through Education, founded the Ethics in Science and Humanities Program operating in Israel and five other countries. Though the ethics program currently operates only in high schools serving high-achieving or gifted students, founders emphasize the universality of its appeal.…

  4. Competencies Used to Evaluate High School Coaches.

    Gratto, John

    1983-01-01

    Studies of how to evaluate high school coaches' effectiveness found that most respondents felt that principals, athletic directors, and coaches should jointly arrive at a method of evaluation. Coaching competencies rated most highly included prevention and care of athletic injuries, supervision, and consistent discipline. Other valued competencies…

  5. Gait analysis by high school students

    Heck, A.; van Dongen, C.

    2008-01-01

    Human walking is a complicated motion. Movement scientists have developed various research methods to study gait. This article describes how a high school student collected and analysed high quality gait data in much the same way that movement scientists do, via the recording and measurement of

  6. 25 CFR 39.145 - Can a school receive both a small school adjustment and a small high school adjustment?

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Can a school receive both a small school adjustment and a small high school adjustment? 39.145 Section 39.145 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION THE INDIAN SCHOOL EQUALIZATION PROGRAM Indian School Equalization Formula Small School...

  7. Sequence Curriculum: High School to College. Middlesex Community College/Haddam-Killingworth High School. Final Report.

    Middlesex Community Coll., Middletown, CT.

    Through a collaborative effort between Middlesex Community College (MxCC) and Haddam-Killingworth High School (HKHS), students taking specific high school courses in television production, broadcast journalism, electronics, and photography are granted college credit by MxCC upon admission to the college's Broadcast Communication Program. The…

  8. After Installation: Ubiquitous Computing and High School Science in Three Experienced, High-Technology Schools

    Drayton, Brian; Falk, Joni K.; Stroud, Rena; Hobbs, Kathryn; Hammerman, James

    2010-01-01

    There are few studies of the impact of ubiquitous computing on high school science, and the majority of studies of ubiquitous computing report only on the early stages of implementation. The present study presents data on 3 high schools with carefully elaborated ubiquitous computing systems that have gone through at least one "obsolescence cycle"…

  9. Comparison of physical activities of female football players in junior high school and high school.

    Inoue, Yuri; Otani, Yoshitaka; Takemasa, Seiichi

    2017-08-01

    [Purpose] This study aimed to compare physical activities between junior high school and high school female football players in order to explain the factors that predispose to a higher incidence of sports injuries in high school female football players. [Subjects and Methods] Twenty-nine female football players participated. Finger floor distance, the center of pressure during single limb stance with eyes open and closed, the 40-m linear sprint time, hip abduction and extension muscle strength and isokinetic knee flexion and extension peak torque were measured. The modified Star Excursion Balance Test, the three-steps bounding test and three-steps hopping tests, agility test 1 (Step 50), agility test 2 (Forward run), curl-up test for 30 seconds and the Yo-Yo intermittent recovery test were performed. [Results] The high school group was only significantly faster than the junior high school group in the 40-m linear sprint time and in the agility tests. The distance of the bounding test in the high school group was longer than that in the junior high school group. [Conclusion] Agility and speed increase with growth; however, muscle strength and balance do not develop alongside. This unbalanced development may cause a higher incidence of sports injuries in high school football players.

  10. Monte-Carlo calculation of irradiation dose content beyond shielding of high-energy accelerators

    Mokhov, N.V.; Frolov, V.V.

    1975-01-01

    The MARS programme, designed for calculating the three-dimensional internuclear cascade in defence of the accelerators by the Monte Carlo method, is described. The methods used to reduce the dispersion and the system of semi-empirical formulas made it possible to exceed the parameters of the existing programmes. By means of a synthesis of the results, registered by MARS and HAMLET programmes, the dosage fields for homogeneous and heterogeneous defence were evaluated. The results of the calculated absorbed and equivalent dose behind the barrier, irradiated by a proton beam, having the energy of Esub(o)=1/1000 GeV are exposed. The dependence of the high- and low-energy neutron, proton, pion, kaon, muonium and γ-quantum dosage on the initial energy and thickness, on the material and the composition of the defence is investigated

  11. Quantum dots/silica/polymer nanocomposite films with high visible light transmission and UV shielding properties.

    Mumin, Md Abdul; Xu, William Z; Charpentier, Paul A

    2015-08-07

    The dispersion of light-absorbing inorganic nanomaterials in transparent plastics such as poly(ethylene-co-vinyl acetate) (PEVA) is of enormous current interest in emerging solar materials, including photovoltaic (PV) modules and commercial greenhouse films. Nanocrystalline semiconductor or quantum dots (QDs) have the potential to absorb UV light and selectively emit visible light, which can control plant growth in greenhouses or enhance PV panel efficiencies. This work provides a new and simple approach for loading mesoporous silica-encapsulated QDs into PEVA. Highly luminescent CdS and CdS-ZnS core-shell QDs with 5 nm size were synthesized using a modified facile approach based on pyrolysis of the single-molecule precursors and capping the CdS QDs with a thin layer of ZnS. To make both the bare and core-shell structure QDs more resistant against photochemical reactions, a mesoporous silica layer was grown on the QDs through a reverse microemulsion technique based on hydrophobic interactions. By careful experimental tuning, this encapsulation technique enhanced the quantum yield (∼65%) and photostability compared to the bare QDs. Both the encapsulated bare and core-shell QDs were then melt-mixed with EVA pellets using a mini twin-screw extruder and pressed into thin films with controlled thickness. The results demonstrated for the first time that mesoporous silica not only enhanced the quantum yield and photostability of the QDs but also improved the compatibility and dispersibility of QDs throughout the PEVA films. The novel light selective films show high visible light transmission (∼90%) and decreased UV transmission (∼75%).

  12. Shielding performances analysis for the IFMIF test facility based on high-fidelity Monte Carlo neutronic calculations

    Kondo, Keitaro, E-mail: kondo.keitaro@jaea.go.jp; Arbeiter, Frederik; Fischer, Ulrich; Lu, Lei; Qiu, Yuefeng; Tian, Kuo

    2015-10-15

    Highlights: • A detailed geometry model with pipe penetrations and gaps was prepared for the IFMIF test cell. • The neutron streaming effect due to gaps and pipes with shielding plugs was investigated. • The present analysis revealed that the streaming effect can be mitigated by some counter measures. • Occupational workers can access to the room above the test cell during operation. - Abstract: The IFMIF Test Cell (TC) design was developed and optimized in the EVEDA phase, and finally the reference TC design was proposed. The present study is devoted to further investigations of open issues on the reference TC design. In order to examine the neutron streaming effect caused by pipe penetrations and gaps around removable shielding plugs, a new geometry model for neutronic analyses has been prepared directly from engineering CAD data by utilizing the McCad conversion software. All removable shielding plugs are separately described in the model and a detailed description of pipes was incorporated into the model. The calculation result suggests that the streaming effect is mitigated if the pipe penetration is designed appropriately, while the gaps around the shielding plugs above the TC have large impact on the radiation dose in the access cell. The concept of the reference TC design has been basically validated from the neutronics point of view, although the streaming effect should be compensated by the shielding capability of the test cell cover plate so that occupational workers can access to the access cell during operation.

  13. Shielding performances analysis for the IFMIF test facility based on high-fidelity Monte Carlo neutronic calculations

    Kondo, Keitaro; Arbeiter, Frederik; Fischer, Ulrich; Lu, Lei; Qiu, Yuefeng; Tian, Kuo

    2015-01-01

    Highlights: • A detailed geometry model with pipe penetrations and gaps was prepared for the IFMIF test cell. • The neutron streaming effect due to gaps and pipes with shielding plugs was investigated. • The present analysis revealed that the streaming effect can be mitigated by some counter measures. • Occupational workers can access to the room above the test cell during operation. - Abstract: The IFMIF Test Cell (TC) design was developed and optimized in the EVEDA phase, and finally the reference TC design was proposed. The present study is devoted to further investigations of open issues on the reference TC design. In order to examine the neutron streaming effect caused by pipe penetrations and gaps around removable shielding plugs, a new geometry model for neutronic analyses has been prepared directly from engineering CAD data by utilizing the McCad conversion software. All removable shielding plugs are separately described in the model and a detailed description of pipes was incorporated into the model. The calculation result suggests that the streaming effect is mitigated if the pipe penetration is designed appropriately, while the gaps around the shielding plugs above the TC have large impact on the radiation dose in the access cell. The concept of the reference TC design has been basically validated from the neutronics point of view, although the streaming effect should be compensated by the shielding capability of the test cell cover plate so that occupational workers can access to the access cell during operation.

  14. Freedom of Expression for High School Journalists: A Case Study of Selected North Carolina Public Schools.

    Phillips, Kay D.

    A study examined the freedom of the high school press in North Carolina to determine whether publication guidelines should be in place, and if so, what those guidelines should contain. High school newspaper advisors, high school principals, and high school newspaper editors from large and small, urban and rural, eastern and western high schools…

  15. Effect of Nanotechnology Instructions on Senior High School Students

    Lu, Chow-Chin; Sung, Chia-Chi

    2011-01-01

    In this research, we cooperate with senior high school teachers to understand current nanotechnology model of senior high school nanotechnology curriculum in Taiwan. Then design senior high school nanotechnology (nano-tech) curriculum to teach 503 senior high school students. After teaching the nano-tech curriculum we use the "Nanotechnology…

  16. Solutions for Failing High Schools: Converging Visions and Promising Models.

    Legters, Nettie; Balfanz, Robert; McPartland, James

    Promising solutions to the failings of traditional comprehensive high schools were reviewed to identify basic principles and strategies for improving high schools nationwide. Selected research studies, policy documents, and promising high school programs were reviewed. The review revealed the following principles for helping high schools better…

  17. Development of an Attitude Scale towards High School Physics Lessons

    Yavas, Pervin Ünlü; Çagan, Sultan

    2017-01-01

    The aim of this study was to develop a Likert type attitude scale for high school students with regard to high school physics lessons. The research was carried out with high school students who were studying in Ankara. First, the opinions of 105 high school students about physics lessons were obtained and then 55 scale items were determined from…

  18. Developing High School Geoscientists through Summer Internships

    Saltzman, J.

    2012-12-01

    High school students in the San Francisco Bay Area have the opportunity to contribute to Earth sciences research during the summer at Stanford University. The School of Earth Sciences hosts about 25 high school students each summer to support ongoing research, through more than just washing glassware. To increase diversity in the geosciences, we select students from diverse backgrounds through an application process which lessens the burden on busy faculty. The students work for 15-20 hours per week under the supervision of graduate students or postdoctoral fellows. The supervisors come to value the interns for a few reasons: not only are they getting some extra help with their research, but they are getting teaching experience in an informal but powerful way and supervising the interns' work over the summer. Another key part of the internship is bringing all of the interns together regularly. Whether it is for career talks, lab tours or field trip, high school students find kindred spirits in the group. Another important reason for weekly gatherings is to introduce the students to the wide field of Earth sciences and the different approaches and paths that scientists take. The summer ends with a culminating event where interns make short informal presentations about their research which give them an opportunity to articulate the big questions they have been helping to answer. Some interns are also invited to present a poster in a session for high school students at the Fall AGU meeting. These experiences of working in the laboratory and communicating about the research are part of the world of Earth sciences that are absent for most youth. The high school internships foster good will between Stanford and the local communities, help develop a more Earth and environmentally knowledgeable public and may have a long-term affect on diversifying the geosciences by exposing more young people to these fields.

  19. Shielding synchrotron light sources: Advantages of circular shield walls tunnels

    Kramer, S.L. [Design and Accelerator Operations Consulting, 568 Wintergreen Ct Ridge, NY 11961 (United States); Ghosh, V.J.; Breitfeller, M. [NSLS-II, Brookhaven National Laboratory, Upton, NY 11973 (United States)

    2016-08-11

    Third generation high brightness light sources are designed to have low emittance and high current beams, which contribute to higher beam loss rates that will be compensated by Top-Off injection. Shielding for these higher loss rates will be critical to protect the projected higher occupancy factors for the users. Top-Off injection requires a full energy injector, which will demand greater consideration of the potential abnormal beam miss-steering and localized losses that could occur. The high energy electron injection beam produce significantly higher neutron component dose to the experimental floor than lower energy injection and ramped operations. High energy neutrons produced in the forward direction from thin target beam losses are a major component of the dose rate outside the shield walls of the tunnel. The convention has been to provide thicker 90° ratchet walls to reduce this dose to the beam line users. We present an alternate circular shield wall design, which naturally and cost effectively increases the path length for this forward radiation in the shield wall and thereby substantially decreasing the dose rate for these beam losses. This shield wall design will greatly reduce the dose rate to the users working near the front end optical components but will challenge the beam line designers to effectively utilize the longer length of beam line penetration in the shield wall. Additional advantages of the circular shield wall tunnel are that it's simpler to construct, allows greater access to the insertion devices and the upstream in tunnel beam line components, as well as reducing the volume of concrete and therefore the cost of the shield wall.

  20. Radiochromic film for dosimetric measurements in radiation shielding composites synthesized for applied in radiology procedures of high dose

    Fontainha, C. C. P. [Universidade Federal de Minas Gerais, Departamento de Engenharia Nuclear, Av. Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte, Minas Gerais (Brazil); Baptista N, A. T.; Faria, L. O., E-mail: crissia@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear / CNEN, Av. Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte, Minas Gerais (Brazil)

    2015-10-15

    Full text: Medical radiology offers great benefit to patients. However, although specifics procedures of high dose, as fluoroscopy, Interventional Radiology, Computed Tomography (CT) make up a small percent of the imaging procedures, they contribute to significantly increase dose to population. The patients may suffer tissue damage. The probability of deterministic effects incidence depends on the type of procedure performed, exposure time, and the amount of applied dose at the irradiated area. Calibrated radiochromic films can identify size and distribution of the radiated fields and measure intensities of doses. Radiochromic films are sensitive for doses ranging from 0.1 to 20 c Gy and they have the same response for X-rays effective energies ranging from 20 to 100 keV. New radiation attenuators materials have been widely investigated resulting in dose reduction entrance skin dose. In this work, Bi{sub 2}O{sub 3} and ZrO{sub 2}:8 % Y{sub 2}O{sub 3} composites were obtained by mixing them with P(VDF-Tr Fe) copolymers matrix from casting method and then characterized by Ftir. Dosimetric measurements were obtained with Xr-Q A2 Gafchromic radiochromic films. In this setup, one radiochromic film is directly exposed to the X-rays beam and another one measures the attenuated beam were exposed to an absorbed dose of 10 mGy of RQR5 beam quality (70 kV X-ray beam). Under the same conditions, irradiated Xr-Q A2 films were stored and scanned measurement in order to obtain a more reliable result. The attenuation factors, evaluated by Xr-Q A2 radiochromic films, indicate that both composites are good candidates for use as patient radiation shielding in high dose medical procedures. (Author)

  1. Use of a Shielded High Resolution Gamma Spectrometry System to Segregate LLW from Contact Handleable ILW Containing Plutonium - 13046

    Lester, Rosemary; Wilkins, Colin [Canberra UK Ltd, Unit 1 B528.1, Harwell Science Campus, Oxfordshire OX11 0DF (United Kingdom); Chard, Patrick [Canberra UK Ltd, Forss Business and Technology park, Thurso, Caithness KW14 7UZ (United Kingdom); Jaederstroem, Henrik; LeBlanc, Paul; Mowry, Rick [Canberra Industries, Inc., 800 Research Parkway, Meriden, Connecticut, 06450 (United States); MacDonald, Sanders; Gunn, William [Dounreay Site Restoration Limited, Dounreay, Thurso, Caithness, KW14 7TZ (United Kingdom)

    2013-07-01

    Dounreay Site Restoration Limited (DSRL) have a number of drums of solid waste that may contain Plutonium Contaminated Material. These are currently categorised as Contact Handleable Intermediate Level Waste (CHILW). A significant fraction of these drums potentially contain waste that is in the Low Level Waste (LLW) category. A Canberra Q2 shielded high resolution gamma spectrometry system is being used to quantify the total activity of drums that are potentially in the LLW category in order to segregate those that do contain LLW from CHILW drums and thus to minimise the total volume of waste in the higher category. Am-241 is being used as an indicator of the presence of plutonium in the waste from its strong 59.54 keV gamma-ray; a knowledge of the different waste streams from which the material originates allows a pessimistic waste 'fingerprint' to be used in order to determine an upper limit to the activities of the weak and non-gamma-emitting plutonium and associated radionuclides. This paper describes the main features of the high resolution gamma spectrometry system being used by DSRL to perform the segregation of CHILW and LLW and how it was configured and calibrated using the Canberra In-Situ Object Counting System (ISOCS). It also describes how potential LLW drums are selected for assay and how the system uses the existing waste stream fingerprint information to determine a reliable upper limit for the total activity present in each measured drum. Results from the initial on-site commissioning trials and the first measurements of waste drums using the new monitor are presented. (authors)

  2. About the Scythian Shields

    About the Scythian Shields

    2017-10-01

    Full Text Available Shields played major role in the armament system of the Scythians. Made from organic materials, they are poorly traced on the materials of archaeological excavations. Besides, scaly surface of shields was often perceived in practice as the remnants of the scaly armor. E. V. Chernenko was able to discern the difference between shields’ scaly plates and armor scales. The top edge of the scales was bent inwards, and shield plates had a wire fixation. These observations let significantly increase the number of shields, found in the burial complexes of the Scythians. The comparison of archaeological materials and the images of Scythian warriors allow distinguishing the main forms of Scythian shields. All shields are divided into fencing shields and cover shields. The fencing shields include round wooden shields, reinforced with bronze sheet, and round moon-shaped shields with a notch at the top, with a metal scaly surface. They came to the Scythians under the Greek influence and are known in the monuments of the 4th century BC. Oval shields with scaly surface (back cover shields were used by the Scythian cavalry. They protected the rider in case of frontal attack, and moved back in case of maneuver or closein fighting. Scythian battle tactics were based on rapid approaching the enemy and throwing spears and further rapid withdrawal. Spears stuck in the shields of enemies, forcing them to drop the shields, uncover, and in this stage of the battle the archers attacked the disorganized ranks of the enemy. That was followed by the stage of close fight. Oval form of a wooden shield with leather covering was used by the Scythian infantry and spearmen. Rectangular shields, including wooden shields and the shields pleached from rods, represented a special category. The top of such shield was made of wood, and a pleached pad on leather basis was attached to it. This shield could be a reliable protection from arrows, but it could not protect against javelins

  3. Developing Cloud Chambers with High School Students

    Ishizuka, Ryo; Tan, Nobuaki; Sato, Shoma; Zeze, Syoji

    The result and outcome of the cloud chamber project, which aims to develop a cloud chamber useful for science education is reported in detail. A project includes both three high school students and a teacher as a part of Super Science High School (SSH) program in our school. We develop a dry-ice-free cloud chamber using salt and ice (or snow). Technical details of the chamber are described. We also argue how the project have affected student's cognition, motivation, academic skills and behavior. The research project has taken steps of professional researchers, i.e., in planning research, applying fund, writing a paper and giving a talk in conferences. From interviews with students, we have learnt that such style of scientific activity is very effective in promoting student's motivation for learning science.

  4. Transition from high schools to engineering education

    Kolmos, Anette; Holgaard, Jette Egelund; Clausen, Nicolaj Riise

    2017-01-01

    Pre-university engineering education has received increasing attention to attract more students to engineering and make them better prepared to enter engineering studies at university level. Denmark is one of the countries that offer established high school curriculum that makes engineering...... the core identity of the school. In a longitudinal research project, the cohort of all Danish engineering students who were enrolled in 2010 has been followed. This study takes a quantitative approach to highlight the differences in preparedness for engineering students who have a background...... themselves as being better prepared in relation to the conduct of experiments, engineering analysis and tolls, as well as in relation to process competences as design, problem solving and teamwork. The students from the profession-oriented high schools also find themselves better prepared in relation...

  5. Early predictors of high school mathematics achievement.

    Siegler, Robert S; Duncan, Greg J; Davis-Kean, Pamela E; Duckworth, Kathryn; Claessens, Amy; Engel, Mimi; Susperreguy, Maria Ines; Chen, Meichu

    2012-07-01

    Identifying the types of mathematics content knowledge that are most predictive of students' long-term learning is essential for improving both theories of mathematical development and mathematics education. To identify these types of knowledge, we examined long-term predictors of high school students' knowledge of algebra and overall mathematics achievement. Analyses of large, nationally representative, longitudinal data sets from the United States and the United Kingdom revealed that elementary school students' knowledge of fractions and of division uniquely predicts those students' knowledge of algebra and overall mathematics achievement in high school, 5 or 6 years later, even after statistically controlling for other types of mathematical knowledge, general intellectual ability, working memory, and family income and education. Implications of these findings for understanding and improving mathematics learning are discussed.

  6. An Analysis of Florida's School Districts' Attendance Policies and their Relationship to High School Attendance Rates

    Reardon, Ryan Turner

    2008-01-01

    The purpose of this non-experimental correlational study was to determine the relationship between the type of attendance policies in the high schools of the 67 Florida school districts, the size of the school district (number of high school students), the socioeconomic status SES) of the school district, and the average daily attendance rate of…

  7. The Shield or the Sword? Revisiting the Debate on Racial Disproportionality in Special Education and Implications for School Psychologists

    Sullivan, Amanda L.; Proctor, Sherrie L.

    2016-01-01

    Scholars in special education and school psychology are engaged in renewed debate about the disproportionate representation of students from culturally and linguistically diverse backgrounds in special education following research and commentaries challenging long held assumptions that many students are inappropriately identified with special…

  8. School Start Times for Middle School and High School Students - United States, 2011-12 School Year.

    Wheaton, Anne G; Ferro, Gabrielle A; Croft, Janet B

    2015-08-07

    Adolescents who do not get enough sleep are more likely to be overweight; not engage in daily physical activity; suffer from depressive symptoms; engage in unhealthy risk behaviors such as drinking, smoking tobacco, and using illicit drugs; and perform poorly in school. However, insufficient sleep is common among high school students, with less than one third of U.S. high school students sleeping at least 8 hours on school nights. In a policy statement published in 2014, the American Academy of Pediatrics (AAP) urged middle and high schools to modify start times as a means to enable students to get adequate sleep and improve their health, safety, academic performance, and quality of life. AAP recommended that "middle and high schools should aim for a starting time of no earlier than 8:30 a.m.". To assess state-specific distributions of public middle and high school start times and establish a pre-recommendation baseline, CDC and the U.S. Department of Education analyzed data from the 2011-12 Schools and Staffing Survey (SASS). Among an estimated 39,700 public middle, high, and combined schools* in the United States, the average start time was 8:03 a.m. Overall, only 17.7% of these public schools started school at 8:30 a.m. or later. The percentage of schools with 8:30 a.m. or later start times varied greatly by state, ranging from 0% in Hawaii, Mississippi, and Wyoming to more than three quarters of schools in Alaska (76.8%) and North Dakota (78.5%). A school system start time policy of 8:30 a.m. or later provides teenage students the opportunity to achieve the 8.5-9.5 hours of sleep recommended by AAP and the 8-10 hours recommended by the National Sleep Foundation.

  9. Transitions from high school to college.

    Venezia, Andrea; Jaeger, Laura

    2013-01-01

    The vast majority of high school students aspire to some kind of postsecondary education, yet far too many of them enter college without the basic content knowledge, skills, or habits of mind they need to succeed. Andrea Venezia and Laura Jaeger look at the state of college readiness among high school students, the effectiveness of programs in place to help them transition to college, and efforts to improve those transitions. Students are unprepared for postsecondary coursework for many reasons, the authors write, including differences between what high schools teach and what colleges expect, as well as large disparities between the instruction offered by high schools with high concentrations of students in poverty and that offered by high schools with more advantaged students. The authors also note the importance of noncurricular variables, such as peer influences, parental expectations, and conditions that encourage academic study. Interventions to improve college readiness offer a variety of services, from academic preparation and information about college and financial aid, to psychosocial and behavioral supports, to the development of habits of mind including organizational skills, anticipation, persistence, and resiliency. The authors also discuss more systemic programs, such as Middle College High Schools, and review efforts to allow high school students to take college classes (known as dual enrollment). Evaluations of the effectiveness of these efforts are limited, but the authors report that studies of precollege support programs generally show small impacts, while the more systemic programs show mixed results. Dual-enrollment programs show promise, but the evaluation designs may overstate the results. The Common Core State Standards, a voluntary set of goals and expectations in English and math adopted by most states, offer the potential to improve college and career readiness, the authors write. But that potential will be realized, they add, only if the

  10. Predicting Success in College Mathematics from High School Mathematics Preparation

    Shepley, Richard A.

    1983-01-01

    The purpose of this study was to develop a model to predict the college mathematics courses a freshman could expect to pass by considering their high school mathematics preparation. The high school information that was used consisted of the student's sex, the student's grade point average in mathematics, the highest level of high school mathematics courses taken, and the number of mathematics courses taken in high school. The high school sample was drawn from graduated Seniors in the State...

  11. Investigation the effect of outdoor air infiltration on the heat-shielding characteristics the outer walls of high-rise buildings

    Vytchikov, Yu. S.; Kostuganov, A. B.; Saparev, M. E.; Belyakov, I. G.

    2018-03-01

    The presented article considers the influence of infiltrated outdoor air on the heat-shielding characteristics of the exterior walls of modern residential and public buildings. A review of the sources devoted to this problem confirmed its relevance at the present time, especially for high-rise buildings. The authors of the article analyzed the effect of longitudinal and transverse air infiltration on the heat-shielding characteristics of the outer wall of a 25-story building that was built in Samara. The results showed a significant reduction of the reduced resistance to the heat transfer of the outer wall when air is infiltrated through it. There are the results of full-scale examination of external walls to confirm the calculated data. Based on the results of the study carried out by the authors of the article, general recommendations on the internal finishing of the outer walls of high-rise buildings are given.

  12. Examples from Astronomy for High School Physics

    Dieterich, Sergio

    2016-01-01

    A formal course in physics is increasingly becoming a standard requirement in the high school curriculum. With that dissemination comes the challenge of reaching and motivating a population that is more diverse in their academic abilities and intrinsic motivation. The abstract nature of pure physics is often made more accessible when motivated by examples from everyday life, and providing copious mathematical as well as conceptual examples has become standard practice in high school physics textbooks. Astronomy is a naturally captivating subject and astronomical examples are often successful in capturing the curiosity of high school students as well as the general population. This project seeks to diversify the range of pedagogical materials available to the high school physics instructor by compiling and publishing specific examples where an astronomical concept can be used to motivate the physics curriculum. This collection of examples will consist of both short problems suitable for daily homework assignments as well as longer project style activities. Collaborations are encouraged and inquiries should be directed to sdieterich at carnegiescience dot edu.This work is funded by the NSF Astronomy and Astrophysics Postdoctoral Fellowship Program through NSF grant AST-1400680.

  13. Early Predictors of High School Mathematics Achievement

    Siegler, Robert S.; Duncan, Greg J.; Davis-Kean, Pamela E.; Duckworth, Kathryn; Claessens, Amy; Engel, Mimi; Susperreguy, Maria Ines; Meichu, Chen

    2012-01-01

    Identifying the types of mathematics content knowledge that are most predictive of students' long-term learning is essential for improving both theories of mathematical development and mathematics education. To identify these types of knowledge, we examined long-term predictors of high school students' knowledge of algebra and overall mathematics…

  14. Teaching the EPR Paradox at High School?

    Pospiech, Gesche

    1999-01-01

    Argues the importance of students at university and in the final years of high school gaining an appreciation of the principles of quantum mechanics. Presents the EPR gedanken experiment (thought experiment) as a method of teaching the principles of quantum mechanics. (Author/CCM)

  15. Complex Development Report: Moanalua High School.

    Anbe, Aruga and Ishizu, Architects, Inc., Honolulu, HI.

    This report documents the planning process and the decisions involved in master planning a proposed Honolulu high school, and it provides guidance for the implementation of those increments remaining after phase one of the first increment had been completed in September 1972. Phase two of the first increment and the second increment are now under…

  16. Planning of high school examinations in Denmark

    Vidal, Rene Victor Valqui; Hansen, Michael Pilegaard

    1995-01-01

    This paper presents a computer based support system used to plan high school examinations in Denmark. We will discuss the methods and techniques used to solve such a complex and large scale combinatorial problem. Decomposition and other heuristic principles have been used extensively to develop...

  17. HUMANITIES IN A JUNIOR HIGH SCHOOL.

    KNIGHT, BONNIE M.

    A HUMANITIES COURSE HAS BEEN DEVELOPED FOR ACADEMICALLY ABLE SEVENTH-GRADE STUDENTS IN BRANCIFORTE JUNIOR HIGH SCHOOL IN SANTA CRUZ, CALIFORNIA. IN A TWO-PERIOD DAILY TIME BLOCK, STUDENTS LEARN ENGLISH, LITERATURE, AND LATIN, AND INVESTIGATE TOPICS IN ARCHEOLOGY, CULTURAL ANTHROPOLOGY, LINGUISTICS, PSYCHOLOGY, PHILOSOPHY, GREEK LITERATURE AND…

  18. Job Satisfaction of High School Journalism Educators.

    Dvorak, Jack; Phillips, Kay D.

    Four research questions are posed to explore the job satisfaction of high school journalism educators. A national random sample of 669 respondents shows that journalism educators are generally satisfied with their jobs--more so than teachers in other disciplines. Multiple regression analysis using Herzberg's motivation-hygiene theory as a…

  19. The Gravity Model for High School Students

    Tribble, Paul; Mitchell, William A.

    1977-01-01

    The authors suggest ways in which the gravity model can be used in high school geography classes. Based on Newton's Law of Molecular Gravitation, the law states that gravitation is in direct ratio to mass and inverse ratio to distance. One activity for students involves determination of zones of influence of cities of various sizes. (Author/AV)

  20. An Exemplary High School Literary Magazine: "Cinnabar."

    Holbrook, Hilary Taylor, Comp.

    One of a series of 20 literary magazine profiles written to help faculty advisors wishing to start or improve their publication, this profile provides information on staffing and production of "Cinnabar," the magazine published by Ward Melville High School, Setauket, New York. The introduction describes the literary magazine contest (and…

  1. Grandfather Tang Goes to High School

    Johnson, Iris DeLoach

    2006-01-01

    This article describes how the children's literature book, Grandfather Tang's Story, which is commonly used in the elementary grades, may be used at the high school level to engage students in an exploration of area and perimeter which includes basic operations with square roots, ordering numbers (decimal approximations, and their exact…

  2. High School Peer Helping: A Program Evaluation.

    Kilgariff, Lisa; Solomon, Mindy; Zanotti, Mary; Chambliss, Catherine

    Peer helpers can act as liaisons to high school guidance departments by identifying problems, making appropriate referrals, and encouraging others to obtain professional help if necessary. An active program can help ensure that in the future students are better prepared to handle conflicts that arise within marriage, career, and family. This study…

  3. Choosing High School Courses with Purpose

    Ayotte, Steve; Sevier, Sharon

    2010-01-01

    In choosing high school courses, students often seem to focus on everything except preparation for an intended major or career. They consider graduation requirements, weighted classes, easy classes...but rarely are these types of choices preparing students for postsecondary education. This article describes the "Career Companion Guide"…

  4. Neoliberalism inside Two American High Schools

    Cleary, Joseph, Jr.

    2017-01-01

    This article examines "neoliberalism" inside two American public high schools. The work of one leading critical theorist, Mark Olssen, is explained and examined. Particular attention is paid to Olssen's concepts of "homo economicus" and "manipulatable man." It is concluded that Olssen's theories on neoliberalism…

  5. Nematodes: Model Organisms in High School Biology

    Bliss, TJ; Anderson, Margery; Dillman, Adler; Yourick, Debra; Jett, Marti; Adams, Byron J.; Russell, RevaBeth

    2007-01-01

    In a collaborative effort between university researchers and high school science teachers, an inquiry-based laboratory module was designed using two species of insecticidal nematodes to help students apply scientific inquiry and elements of thoughtful experimental design. The learning experience and model are described in this article. (Contains 4…

  6. Using Creative Group Techniques in High Schools

    Veach, Laura J.; Gladding, Samuel T.

    2007-01-01

    Groups in high schools that use creative techniques help adolescents express their emotions appropriately, behave differently, and gain insight into themselves and others. This article looks at seven different creative arts media--music, movement, visual art, literature, drama, play, and humor--and offers examples of how they can be used in groups…

  7. AAPT/NSTA High School Physics Examination.

    Nelson, James

    1983-01-01

    Discusses development of the American Association of Physics Teachers and National Science Teachers Association (AAPT/NSTA) high school physics examination. Includes sample examination questions and distribution of topics: mechanics (30 percent), waves/optics/sound (20 percent), heat/kinetic theory (10 percent), electricity/magnetism (25 percent),…

  8. San Diego's High School Dropout Crisis

    Wilson, James C.

    2012-01-01

    This article highlights San Diego's dropout problem and how much it's costing the city and the state. Most San Diegans do not realize the enormous impact high school dropouts on their city. The California Dropout Research Project, located at the University of California at Santa Barbara, has estimated the lifetime cost of one class or cohort of…

  9. Discrete mathematics in the high school curriculum

    Anderson, I.; Asch, van A.G.; van Lint, J.H.

    2004-01-01

    In this paper we present some topics from the field of discrete mathematics which might be suitable for the high school curriculum. These topics yield both easy to understand challenging problems and important applications of discrete mathematics. We choose elements from number theory and various

  10. Socialism in High School Social Studies Textbooks

    Neumann, Richard

    2012-01-01

    This article concerns textbook analysis regarding the presentation of socialism in four leading high school social studies books, one in each of the following subjects: United States history, world history, United States government, and economics. Findings indicate that students relying on these texts to gain understanding of socialism and…

  11. Outline of High School Credit Courses.

    South Carolina State Dept. of Education, Columbia.

    An outline is presented of the objectives and content of courses offered for credit in high schools in South Carolina. Courses in the following subjects are described: (1) art; (2) drama; (3) driver education; (4) environmental education; (5) foreign language: French, German, Russian, Spanish; (6) health; (7) language arts; (8) mathematics; (9)…

  12. High School Dropout and Teen Childbearing

    Marcotte, Dave E.

    2013-01-01

    Understanding the relationship between high school dropout and teen childbearing is complicated because both are affected by a variety of difficult to control factors. In this paper, I use panel data on aggregate dropout and fertility rates by age for all fifty states to develop insight by instrumenting for dropout using information on state…

  13. Like a Rock: Far Rockaway High School

    Whelan, Debra Lau

    2007-01-01

    Students from Far Rockaway High School are just back from spring break, and media specialist Geri Ellner is busy getting ready for her first class. She's already pulled out a copy of Anthony Browne's award-winning picture book "The Shape Game" (Farrar, 2003), and now she's patiently cuing up a Disney video of "Pocahontas" on…

  14. High School Womens' Studies: A Working Model

    Adler, Iris

    1976-01-01

    Discusses several difficulties in bringing the womens' movement into the high schools, noting a strong resistance to feminism by the students themselves. The authors course began with discussions on what it meant to be a girl, daughter, and female student; focused on women and the media; examined women in other cultures; and finally discussed…

  15. Self-Esteem of Junior High and High School Students.

    Lee, Kimberly E.

    The purpose of this thesis was to investigate the self-esteem of junior high and high school students. The independent variables investigated were quality of family life, birth order, family size, maternal employment, grade level and family structure. The dependent variables were the self-esteem scores from the following sub-scales of the Texas…

  16. Neutron shielding material

    Suzuki, Shigenori; Iimori, Hiroshi; Kobori, Junzo.

    1980-01-01

    Purpose: To provide a neutron shielding material which incorporates preferable shielding capacity, heat resistance, fire resistance and workability by employing a mixture of thermosetting resin, polyethylene and aluminium hydroxide in special range ratio and curing it. Constitution: A mixture containing 20 to 60% by weight of thermosetting resin having preferable heat resistance, 10 to 40% by weight of polyethylene powder having high hydrogen atom density and 1000 to 60000 of molecular weight, and 15 to 55% by weight of Al(OH) 3 for imparting fire resistance and self-fire extinguishing property thereto is cured. At this time approx. 0.5 to 5% of curing catalyst of the thermosetting resin is contained in 100 parts by weight of the mixture. (Sekiya, K.)

  17. Shielding calculations with SCALE/MAVRIC and comparison with measurements for the TN85 cask with vitrified high level radioactive waste

    Thiele, Holger; Börst, Frank-Michael

    2017-09-01

    A series of dose rate/spectra measurements in the German interim storage facility Gorleben was carried out at a TN85 cask in April 2009. This type of cask is used for the transport and interim storage of vitrified high level radioactive waste (HAW) from reprocessing. The aim of this work is to assess the shielding component MAVRIC of the SCALE code system with these measurements for the use in the German Bundesamt für Kerntechnische Entsorgungssicherheit (BfE).

  18. Shielding benchmark problems

    Tanaka, Shun-ichi; Sasamoto, Nobuo; Oka, Yoshiaki; Kawai, Masayoshi; Nakazawa, Masaharu.

    1978-09-01

    Shielding benchmark problems were prepared by the Working Group of Assessment of Shielding Experiments in the Research Comittee on Shielding Design of the Atomic Energy Society of Japan, and compiled by the Shielding Laboratory of Japan Atomic Energy Research Institute. Twenty-one kinds of shielding benchmark problems are presented for evaluating the calculational algorithm and the accuracy of computer codes based on the discrete ordinates method and the Monte Carlo method and for evaluating the nuclear data used in the codes. (author)

  19. Building a Virtual High School...Click by Click

    Podoll, Sue; Randle, Darcy

    2005-01-01

    The Rapid City Academy is the alternative high school program for South Dakota's Rapid City Area Schools, which has an enrollment of about 13,000 K-12 students, with five middle schools feeding two large traditional high schools and the alternative program. A high percentage of students at the academy are considered "at-risk" due to…

  20. Continuing Care in High Schools: A Descriptive Study of Recovery High School Programs

    Finch, Andrew J.; Moberg, D. Paul; Krupp, Amanda Lawton

    2014-01-01

    Data from 17 recovery high schools suggest programs are dynamic and vary in enrollment, fiscal stability, governance, staffing, and organizational structure. Schools struggle with enrollment, funding, lack of primary treatment accessibility, academic rigor, and institutional support. Still, for adolescents having received treatment for substance…

  1. Reduction of Social Inequality in High School

    Jensen, Ulla Højmark

    2014-01-01

    This article explores structures in the learning environment at the classroom level that can contribute to reduction of social inequality in education. It draws on qualitative observation studies of Latino’s in high schools in New York City, USA, by a Danish researcher. The purpose of this article...... is to explore ‘good examples’ from an outsider’s perspective and there by create an empirical and theoretical focus on how school characteristics and structures cross boarders are connected to the reduction of social inequality in education....

  2. Radiation shielding device

    Nakagawa, Takahiro; Yamagami, Makoto.

    1996-01-01

    A fixed shielding member made of a radiation shielding material is constituted in perpendicular to an opening formed on radiation shielding walls. The fixed shielding member has one side opened and has other side, the upper portion and the lower portion disposed in close contact with the radiation shielding walls. Movable shielding members made of a radiation shielding material are each disposed openably on both side of the fixed shielding member. The movable shielding member has a shaft as a fulcrum on one side thereof for connecting it to the radiation shielding walls. The other side has a handle attached for opening/closing the movable shielding member. Upon access of an operator, when each one of the movable shielding members is opened/closed on every time, leakage of linear or scattered radiation can be prevented. Even when both of the movable shielding members are opened simultaneously, the fixed shielding member and the movable shielding members form labyrinth to prevent leakage of linear radioactivity. (I.N.)

  3. Harmfulness of smoking among high school students

    Iwona Rotter

    2013-03-01

    Full Text Available Introduction: The aim of the study was to assess the level of awareness of smoking and non smoking students on harmful impact of nicotine and cigarette smoke on human body. Material and methods: The study was carried out in March 2011 in high schools in Szczecin. Own elaborated questionnaire was used. 288 students from high school, technical college and vocational school were tested. Results: The majority of responders (95,1% claimed that cigarette smoke is harmful both for passive and active smokers. They most often pinpoint the direct cause connected with smoking to pulmonary diseases (264 persons and cancers (240 persons. Almost 90% of students found negative impact of tobacco products on development of fetus of pregnant women. Overwhelming majority of respondents (83,2% feels anxious if it comes to stay in a room filled with smoke. Conclusions: The awareness of high school students on negative influence of smoking on human body is quite satisfactory, but there is still a need for more education in the range of diseases and symptoms connected with smoking.

  4. Study of casks shielded with heavy metal to transport highly radioactive substances; Estudo de embalados com blindagem em metal pesado para transporte de substancias altamente radioativas

    Lucchesi, R.F.; Hara, D.H.S.; Martinez, L.G.; Mucsi, C.S.; Rossi, J.L., E-mail: rflguimaraes@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    Nowadays, Brazil relies on casks produced abroad for transportation in its territory of substances that are sources of high radioactivity, especially the Mo-99. The product of the radioactive decay of the Mo-99 is the Tc-99m, which is used in nuclear medicine for administration to humans in the form of injectable radioactive drugs for the image diagnosis of numerous pathologies. This paper aims to study the existing casks in order to propose materials for the construction of the core part as shielding against gamma radiation. To this purpose, the existing literature on the subject was studied, as well as evaluation of existing and available casks. The study was focused on the core of which is made of heavy metals, especially depleted uranium for shielding the emitted radiation. (author)

  5. Survivor shielding. Part C. Improvements in terrain shielding

    Egbert, Stephen D.; Kaul, Dean C.; Roberts, James A.; Kerr, George D.

    2005-01-01

    A number of atomic-bomb survivors were affected by shielding provided by terrain features. These terrain features can be a small hill, affecting one or two houses, or a high mountain that shields large neighborhoods. In the survivor dosimetry system, terrain shielding can be described by a transmission factor (TF), which is the ratio between the dose with and without the terrain present. The terrain TF typically ranges between 0.1 and 1.0. After DS86 was implemented at RERF, the terrain shielding categories were examined and found to either have a bias or an excessive uncertainty that could readily be removed. In 1989, an improvement in the terrain model was implemented at RERF in the revised DS86 code, but the documentation was not published. It is now presented in this section. The solution to the terrain shielding in front of a house is described in this section. The problem of terrain shielding of survivors behind Hijiyama mountain at Hiroshima and Konpirasan mountain at Nagasaki has also been recognized, and a solution to this problem has been included in DS02. (author)

  6. Astrobiology in an Urban New York City High School: John Dewey High School's Space Science Academy

    Fried, B.; Dash, H. B.

    2010-04-01

    John Dewey High School's participation in NASA's MESDT and DLN projects and other partnerships provide opportunities for our diverse population, focusing particular attention to under-represented and under-served groups in the field of Space Science.

  7. Shielding augmentation of roll-on shield from NAPS to Kaiga-2

    Pradhan, A.S.; Kumar, A.N.

    2000-01-01

    Extensive radiation field surveys were conducted in NAPS and KAPS reactor buildings as a part of commissioning checks on radiation shielding. During such surveys, dose rate higher than the expected values were noticed in fuelling machine service areas. A movable shield, separating high field area fuelling machine vault and low field area fuelling machine service area, known as roll-on shield was identified as one of the causes of high field in fuelling machine service area along with weaker end-shield. This paper discusses systematic approach adopted in bringing down the dose rates in fuelling machine service area by augmentation of roll-on shield. (author)

  8. The Effect of High School Shootings on Schools and Student Performance

    Beland, Louis-Philippe; Kim, Dongwoo

    2016-01-01

    We analyze how fatal shootings in high schools affect schools and students using data from shooting databases, school report cards, and the Common Core of Data. We examine schools' test scores, enrollment, number of teachers, graduation, attendance, and suspension rates at schools that experienced a shooting, employing a difference-in-differences…

  9. The Effect of High School Shootings on Schools and Student Performance

    Louis-Philippe Beland; Dongwoo Kim

    2015-01-01

    We analyze how fatal shootings in high schools affect schools and students using data from shooting databases, school report cards, and the Common Core of Data. We examine schools’ test scores, enrollment, and number of teachers, as well as graduation, attendance, and suspension rates at schools that experienced a shooting, employing a difference-in-differences strategy that uses other high schools in the same district as the comparison group. Our findings suggest that homicidal shootings s...

  10. Transformational Leadership and Teacher Motivation in Southwestern Arizona High Schools

    Reynolds, Catherine L.

    2009-01-01

    The purpose of this study was to explore the relationship between transformational leadership and teacher motivation in Southwestern Arizona high schools. Teachers in a school district in Southwestern Arizona comprised of high schools were surveyed using two instruments, Leithwood and Jantzi's (1998) The Leadership and Management of Schools in…

  11. James Madison High: A School at the Crossroads

    Stroup, John T.; Salmonowicz, Michael J.; Broom, Christopher C.

    2007-01-01

    This case tells the story of James Madison High School, which became the epicenter of a debate over the future reorganization and control of large secondary schools in the Los Angeles Unified School District (LAUSD). The LAUSD, recently taken over by the newly elected mayor, was fighting for control of this 3,000-student high school with a charter…

  12. Sleep disorders among high school students in New Zealand

    Fernando AT; Samaranayake CB; Blank CJ; Roberts G; Arroll B

    2013-01-01

    INTRODUCTION: Adolescents are known to have high risk factors for sleep disorders, yet the youth rates of sleep disturbances are unknown. AIM: This study aimed to determine the prevalence of sleep disorders among New Zealand high school students. METHODS: The Auckland Sleep Questionnaire (ASQ) was administered to high school students at six schools in the North Island. Schools were chosen to reflect a range of ethnicities and school deciles, which identify the socioeconomic status of househol...

  13. Prompt radiation, shielding and induced radioactivity in a high-power 160 MeV proton linac

    Magistris, Matteo [CERN, CH-1211 Geneva 23 (Switzerland)]. E-mail: matteo.magistris@cern.ch; Silari, Marco [CERN, CH-1211 Geneva 23 (Switzerland)

    2006-06-23

    CERN is designing a 160 MeV proton linear accelerator, both for a future intensity upgrade of the LHC and as a possible first stage of a 2.2 GeV superconducting proton linac. A first estimate of the required shielding was obtained by means of a simple analytical model. The source terms and the attenuation lengths used in the present study were calculated with the Monte Carlo cascade code FLUKA. Detailed FLUKA simulations were performed to investigate the contribution of neutron skyshine and backscattering to the expected dose rate in the areas around the linac tunnel. An estimate of the induced radioactivity in the magnets, vacuum chamber, the cooling system and the concrete shield was performed. A preliminary thermal study of the beam dump is also discussed.

  14. The High School student’s journey:

    Gholamian, Jamshid

    The aim of this paper is to examine the construction of self and other in counseling conversations between students with an ethnic minority background and counselors in 3 high schools in Copenhagen, Denmark. The analysis is based on Russian philosopher Mikhail Bakhtin’s literary theory of Chronot......The aim of this paper is to examine the construction of self and other in counseling conversations between students with an ethnic minority background and counselors in 3 high schools in Copenhagen, Denmark. The analysis is based on Russian philosopher Mikhail Bakhtin’s literary theory...... of Chronotope. I see the concept as useful in connection with students' self-constructions (autobiographies). The analysis shows how time and space plays into the counseling conversations, and how other contexts and dialogues play a stronger role in the students design of themselves; that is, how a fusion...

  15. Measuring space radiation shielding effectiveness

    Bahadori Amir

    2017-01-01

    Full Text Available Passive radiation shielding is one strategy to mitigate the problem of space radiation exposure. While space vehicles are constructed largely of aluminum, polyethylene has been demonstrated to have superior shielding characteristics for both galactic cosmic rays and solar particle events due to the high hydrogen content. A method to calculate the shielding effectiveness of a material relative to reference material from Bragg peak measurements performed using energetic heavy charged particles is described. Using accelerated alpha particles at the National Aeronautics and Space Administration Space Radiation Laboratory at Brookhaven National Laboratory, the method is applied to sample tiles from the Heat Melt Compactor, which were created by melting material from a simulated astronaut waste stream, consisting of materials such as trash and unconsumed food. The shielding effectiveness calculated from measurements of the Heat Melt Compactor sample tiles is about 10% less than the shielding effectiveness of polyethylene. Shielding material produced from the astronaut waste stream in the form of Heat Melt Compactor tiles is therefore found to be an attractive solution for protection against space radiation.

  16. Measuring space radiation shielding effectiveness

    Bahadori, Amir; Semones, Edward; Ewert, Michael; Broyan, James; Walker, Steven

    2017-09-01

    Passive radiation shielding is one strategy to mitigate the problem of space radiation exposure. While space vehicles are constructed largely of aluminum, polyethylene has been demonstrated to have superior shielding characteristics for both galactic cosmic rays and solar particle events due to the high hydrogen content. A method to calculate the shielding effectiveness of a material relative to reference material from Bragg peak measurements performed using energetic heavy charged particles is described. Using accelerated alpha particles at the National Aeronautics and Space Administration Space Radiation Laboratory at Brookhaven National Laboratory, the method is applied to sample tiles from the Heat Melt Compactor, which were created by melting material from a simulated astronaut waste stream, consisting of materials such as trash and unconsumed food. The shielding effectiveness calculated from measurements of the Heat Melt Compactor sample tiles is about 10% less than the shielding effectiveness of polyethylene. Shielding material produced from the astronaut waste stream in the form of Heat Melt Compactor tiles is therefore found to be an attractive solution for protection against space radiation.

  17. Influence of the magnetic field orientation on the mixed state properties of high temperature superconductors: an ac shielding study

    Schmidt, B.

    1999-01-01

    This work deals with the influence of the orientation of an applied static magnetic field on the mixed state properties of high temperature superconducting cuprates. The mixed state is characterized by the presence of vortices (quanta of magnetic flux). Their properties have been tested via the dynamic approach of the shielding of an ac magnetic field. In pristine Bi 2 Sr 2 CaCu 2 O 8 crystals the first order transition of the vortex system from an ordered to a disordered state has been studied. It has been found that in the material the transition is mainly determined by the component of the field perpendicular to the superconducting copper oxide layers. However, the value of this component at the transition diminishes with the increase of the field component parallel to the layers. This is explained by the decrease of the Josephson coupling between 2D vortices in neighbouring planes in the presence of a parallel component. In heavy ion irradiated Bi 2 Sr 2 CaCu 2 O 8 the subject under investigation has been the pinning of the vortices by the irradiation tracks. These defects push the irreversibility line towards higher fields. In the field range that has become irreversible after irradiation pinning by columnar defects is anisotropic. This anisotropy in pinning indicates that a coupling exists between the 2D vortices that form a vortex line, in contrast to the behaviour in the pristine material in the same field range. HgBa 2 Ca 2 Cu 3 O 8 with columnar defects shows essentially the same behaviour as Bi 2 Sr 2 CaCu 2 O 8 , the differences being well explained by the lower anisotropy of HgBa 2 Ca 2 Cu 3 O 8 which leads to a more linear character of the vortices. Finally, it has been shown that in pristine Bi 2 Sr 2 CaCu 2 O 8 the concentration of the vortices in the center of the sample is explained by the surface barrier alone. (author)

  18. Influence of the magnetic field orientation on the mixed state properties of high temperature superconductors: an ac shielding study

    Schmidt, B

    1999-07-01

    This work deals with the influence of the orientation of an applied static magnetic field on the mixed state properties of high temperature superconducting cuprates. The mixed state is characterized by the presence of vortices (quanta of magnetic flux). Their properties have been tested via the dynamic approach of the shielding of an ac magnetic field. In pristine Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} crystals the first order transition of the vortex system from an ordered to a disordered state has been studied. It has been found that in the material the transition is mainly determined by the component of the field perpendicular to the superconducting copper oxide layers. However, the value of this component at the transition diminishes with the increase of the field component parallel to the layers. This is explained by the decrease of the Josephson coupling between 2D vortices in neighbouring planes in the presence of a parallel component. In heavy ion irradiated Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} the subject under investigation has been the pinning of the vortices by the irradiation tracks. These defects push the irreversibility line towards higher fields. In the field range that has become irreversible after irradiation pinning by columnar defects is anisotropic. This anisotropy in pinning indicates that a coupling exists between the 2D vortices that form a vortex line, in contrast to the behaviour in the pristine material in the same field range. HgBa{sub 2}Ca{sub 2}Cu{sub 3}O{sub 8} with columnar defects shows essentially the same behaviour as Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8}, the differences being well explained by the lower anisotropy of HgBa{sub 2}Ca{sub 2}Cu{sub 3}O{sub 8} which leads to a more linear character of the vortices. Finally, it has been shown that in pristine Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} the concentration of the vortices in the center of the sample is explained by the surface barrier alone. (author)

  19. Development of heat resistant concrete and its application to concrete casks. Improvement of neutron shielding performance of concrete in high temperature environment

    Owaki, Eiji; Hata, Akihito; Sugihara, Yutaka; Shimojo, Jun; Taniuchi, Hiroaki; Mantani, Kenichi

    2003-01-01

    Heat resistant concrete with hydrogen, which is able to shield neutron at more than 100degC, was developed. Using this new type concrete, a safety concrete cask having the same concept of metal casks was designed and produced. The new type cask omitted the inhalation and exhaust vent of the conventional type concrete casks. The new concrete consists of Portland cement added calcium hydroxide, iron powder and iron fiber. It showed 2.17 g/cm 3 density, 10.8 mass% water content, 1.4 W/(m·K) thermal conductivity at 150degC. Increasing of heat resistance made possible to produce the perfect sealing type structure, which had high shielding performance of radiation no consideration for streaming of radiation. Moreover, a monitor of sealing can be set. General view of concrete casks, outer view of 1/3 scaled model, cask storage system in the world, properties of new developed heat resistant concrete, results of shielding calculation are contained. (S.Y.)

  20. Premenstrual syndrome (PMS among high school students

    Buddhabunyakan N

    2017-07-01

    Full Text Available Nattapong Buddhabunyakan, Srinaree Kaewrudee, Chompilas Chongsomchai, Sukree Soontrapa, Woraluk Somboonporn, Jen Sothornwit Department of Obstetrics and Gynaecology, Faculty of Medicine, Khon Kaen University, Khon Kaen, Thailand Background: Premenstrual syndrome (PMS is a common health problem among adolescents.Objective: To assess the prevalence of PMS in Thai high school students.Materials and methods: This was a prospective study conducted among menstruating high school students in Khon Kaen, Thailand, from September to December, 2015. Participants were asked to prospectively complete an anonymous questionnaire, which included information about demographic data, menstrual patterns, and symptoms to be recorded on a daily calendar of premenstrual experiences according to the diagnostic criteria proposed by the American College of Obstetricians and Gynecologists. All of the data were prospectively recorded for 90 consecutive days.Results: Of the 399 participants, 289 (72.4% completed the self-report questionnaire. Eighty-six participants (29.8%; 95% CI, 24.5%–35.4% reported having PMS. The most common somatic and affective symptoms among participants with PMS were breast tenderness (74.4% and angry outbursts (97.7%. There were significant differences between the PMS and non-PMS groups, and PMS was associated with various problems related to educational activities, including lack of concentration and motivation, poor individual work performance, poor collaborative work performance, and low scores. However, there were no significant differences regarding interpersonal relationships between the PMS and non-PMS groups.Conclusions: PMS is a common menstrual disorder among Thai high school students. The most common symptoms reported in this study were angry outbursts and breast tenderness. Keywords: premenstrual symptoms, prevalence, association, high school students

  1. Factors Associated with Absenteeism in High Schools

    DEMIR, Kamile; AKMAN KARABEYOGLU, Yasemin

    2016-01-01

    Problem Statement: There are many factors that affect student achievement directly and indirectly at the secondary educational level. Lower attendance rates have been cited as detrimental to academic achievement; therefore, it is suggested that improved attendance is a direct indicator, rather than determinant of students’ academic achievement.Purpose of Study: The main purpose of this study was to investigate the effect of individual, family and school variables on absenteeism among high sch...

  2. Citizenship Engagement: Responses from High School Students

    Martin, Leisa A.

    2017-01-01

    In the United States, the main mission of social studies education is to prepare students for citizenship. With this in mind, the following study examined 191 high school students’ views on how they demonstrated citizenship. Traditionally with this age group, personally responsible citizenship has been a common form of self-reported citizenship engagement. However, in this study, the students seemed to conceptualize citizenship differently. With the Akwesasne Mohawk students, the European Ame...

  3. At-risk high school seniors: Science remediation for Georgia's High School Graduation Test

    Carroll, Carolyn M.

    State departments of education have created a system of accountability for the academic achievement of students under the mandate of the No Child Left Behind Act of 2001. The Georgia Department of Education established the Georgia High School Graduation Test (GHSGT) as their method of evaluating the academic achievement of high school students. The GHSGT consist of five sections and students must pass all five sections before students they are eligible to receive a diploma. The purpose of the study was to examine the effects of teacher-lead and computer based remediation for a group of high school seniors who have been unsuccessful in passing the science portion of the GHSGT. The objectives of this study include (a) Identify the most effective method of remediation for at-risk students on the science section of the GHSGT, and (b) evaluate the methods of remediation for at-risk students on the science section of GHSGT available to high school students. The participants of this study were at-risk seniors enrolled in one high school during the 2007-2008 school year. The findings of this research study indicated that at-risk students who participated in both types of remediation, teacher-led and computer-based, scored significantly higher than the computer-based remediation group alone. There was no significant relationship between the test scores and the number of times the students were tested.

  4. An improved method for predicting the lightning performance of high and extra-high-voltage substation shielding

    Vinh, T.

    1980-08-01

    There is a need for better and more effective lightning protection for transmission and switching substations. In the past, a number of empirical methods were utilized to design systems to protect substations and transmission lines from direct lightning strokes. The need exists for convenient analytical lightning models adequate for engineering usage. In this study, analytical lightning models were developed along with a method for improved analysis of the physical properties of lightning through their use. This method of analysis is based upon the most recent statistical field data. The result is an improved method for predicting the occurrence of sheilding failure and for designing more effective protection for high and extra high voltage substations from direct strokes.

  5. Analysis of high school students’ environmental literacy

    Wardani, R. A. K.; Karyanto, P.; Ramli, M.

    2018-05-01

    The student’s environmental literacy (EL) is a vital component to improve the awareness of student on environmental issues. This research aims to measure and analyse the EL of high school students, and how the topic of environment has been taught in high school. The research was conducted in February to April 2017. The EL was measured on three aspects, i.e. knowledge, attitude and concern. The participants were sixty-five (21 boys, 44 girls) purposively selected from students of grade X, XI and XII of one Senior High School in Karanganyar Regency, Indonesia. The knowledge of students on concepts of environmental issues was tested by fourteen main questions followed by supported questions. The result showed that 80% of students were classified as inadequate category. The attitude of students was measured by New Ecological Paradigm (NEP) consisted of fifteen items, and students’ average score was 46.42 (medium). The concern was measured by fifteen statements about environment, and it was ranged from 2.58 to 4.18. EL of students may low due to students’ lack understanding of the environment concepts, the limited theories and concepts transferred to students, inappropriate lesson plan to meet the EL components.

  6. Forensic Science Curriculum for High School Students

    Burgess, Christiana J.

    Over the last several decades, forensic science---the application of science to civil and criminal legal matters---has become of increasing popularity with the public. The range of disciplines within the field is immense, offering individuals the potential for a unique career, regardless of their specific interests or expertise. In response to this growth, many organizations, both public and private, have recognized the need to create forensic science programs that strive to maintain and enhance the quality of forensic science education. Unfortunately, most of the emphasis placed on developing these materials relates to post-secondary education, and creates a significant lack of forensic science educational materials available in the U.S., especially in Oklahoma. The purpose of this project was to create a high school curriculum that provides the foundation for building a broad, yet comprehensive, overview of the field of forensic science and its associated disciplines. The overall goal was to create and provide course materials to high school teachers in order to increase their knowledge of forensic science such that they are able to teach its disciplines effectively and with accuracy. The Forensic Science Curriculum for High School Students includes sample lesson plans, PowerPoint presentations, and lab activities with step-by-step instructions.

  7. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 6. Perspectives Charter School

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  8. Graduation Rates in South Carolina Public High Schools: The Effect of School Size and Socioeconomic Status

    Rivers, Thomas E., Jr.

    2012-01-01

    This study included a comparison of the graduation rates among high schools in South Carolina closely analyzing school size and socioeconomic status. The purpose for the study was to answer two questions: What patterns and relationships exist between school size and graduation rates at high schools in South Carolina? What patterns and…

  9. Relations between Popularity and Prosocial Behavior in Middle School and High School Chinese Adolescents

    Lu, Ting; Li, Ling; Niu, Li; Jin, Shenghua; French, Doran C.

    2018-01-01

    The concurrent and longitudinal associations between popularity, likeability, and prosocial behavior were evaluated in this three-year study of middle school and high school Chinese adolescents. The initial sample included 766 middle school (mean age = 13.3 years) and 668 high school participants (mean age = 16.6 years); there were 880 (399 girls)…

  10. Creating a Comprehensive School Reform Model: The Talent Development High School with Career Academies.

    Jordan, Will J.; McPartland, James M.; Legters, Nettie E.; Balfanz, Robert

    2000-01-01

    Discusses the need for comprehensive reforms in school organization, curriculum and instruction, and professional development to address the problems of large urban high schools. Describes the Talent Development High School with Career Academies model being developed to meet the needs of such schools. (SLD)

  11. High Pressure Reform: Examining Urban Schools' Response to Multiple School Choice Policies

    Holme, Jennifer Jellison; Carkhum, Rian; Rangel, Virginia Snodgrass

    2013-01-01

    Over the past several decades, policymakers have sought to address the problem of school failure by exposing traditional public schools to competitive market forces. In this analysis, we examine how two traditional public schools in a "high pressure/high choice" urban school cluster in Texas responded to a number of overlapping choice…

  12. Case Studies of Leading Edge Small Urban High Schools. Personalization Strategic Designs: 9. MetWest High School

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  13. Case Studies of Leading Edge Small Urban High Schools. Core Academic Strategic Designs: 2. Noble Street Charter High School

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  14. Merits of Undergraduate and High School Research

    Kenney, John

    2016-06-01

    When it comes to sports, everyone gets it; you have to play to really understand, experience, and learn what the game is all about. It would be ludicrous to teach basketball by practicing basketball fundamentals in the gym (layups, free throws, jump shots, dribbling, defense), reading about and attending professional basketball games, but never playing in a game. As important as classes and teaching laboratories may be in science education, there is simply no substitute for active engagement in scientific research to show students what science is all about and, perhaps even more importantly, to inspire and motivate them to become scientists or at least appreciate science. It is a widely held misconception that a student cannot really do meaningful, publishable scientific research until he/she is in graduate school. In actual fact, college undergraduates and even high school students can make original and significant scientific research contributions. Astronomical research, in particular, is very well suited to engage the beginning high school or college undergraduate researcher. The night sky’s inherent accessibility and also its inherent grandeur are natural draws for the curious student’s mind. And much can be learned and discovered using small telescopes. In sports, joining a team is a key aspect of the sports experience. Similarly in science, joining a research team and thereby entering a “community of scientific practice” is fundamental and transformational. As important as working with equipment and acquiring data happen to be in scientific research, this is only the beginning of the research process. Student researchers of all ages—particularly high school students and college undergraduates—have much to gain by giving presentations on their research, writing up their results for publication, and going through the peer review process. But this only works if the student researchers are imbedded within the community of practice.

  15. High School Physics Courses & Enrollments: Results from the 2012-13 Nationwide Survey of High School Physics Teachers. Focus On

    White, Susan; Tesfaye, Casey Langer

    2014-01-01

    This report examines enrollments in high school physics during the 2012-13 school year. Based on data from the most recent survey (which includes both public and private high schools in the U.S.), it is estimated that 39% of the class of 2013 took high school physics before graduating. During the 2012-13 school year, 1.38 million students were…

  16. Concrete shielding for nuclear ship 'Mutsu'

    Nagase, Tetsuo; Nakajima, Tadao; Okumura, Tadahiko; Saito, Tetsuo

    1983-01-01

    The nuclear ship ''Mutsu'' was constructed in 1970 as the fourth in the world. On September 1, 1974, during the power raising test in the Pacific Ocean, radiation leak was detected. As the result of investigation, it was found that the cause was the fast neutrons streaming through the gap between the reactor pressure vessel and the primary shield. In order to repair the shielding facility, the Japan Nuclear Ship Research Development Agency carried out research and development and shielding design. It was decided to adopt serpentine concrete for the primary shield, which is the excellent moderator of fast neutrons even at high temperature, and heavy concrete for the secondary shield, which is effective for shielding both gamma ray and neutron beam. The repair of shielding was carried out in the Sasebo Shipyard, and completed in August, 1982. The outline of the repair work is reported. The weight increase was about 300 t. The conditions of the shielding design, the method of shielding analysis, the performance required for the shielding concrete, the preliminary experiment on heavy concrete and the construction works of serpentine concrete and heavy concrete are described. (Kako, I.)

  17. Handout on shielding calculation

    Heilbron Filho, P.F.L.

    1991-01-01

    In order to avoid the difficulties of the radioprotection supervisors in the tasks related to shielding calculations, is presented in this paper the basic concepts of shielding theory. It also includes exercises and examples. (author)

  18. HIGH SCHOOL STUDENTS’ VIEWS ON BLENDED LEARNING

    Ibrahim Umit YAPICI,

    2012-08-01

    Full Text Available In this study, it is aimed to determine the high school students’ views on blended learning. The study was carried out in biology course for the lesson unit of “Classification of Living Things and Biodiversity” with 47 9th grade students attending Nevzat Ayaz Anatolian High School in the second term of the academic year of 2009-2010. The lessons were taught in a way appropriate to the blended learning model both via the Internet and on face-to-face basis. As the online dimension of the blended learning model, Moodle, a Learning Management System (LMS, was used. The application lasted 10 weeks. The scale of learners’ views on blended learning was applied and interviews were held to determine the views. As a result of the analysis of the scale, it was seen that their views were “highly” positive. The interviews held with the students revealed that the blended learning model provided students with various opportunities such as getting prepared for the lessons, reviewing the lessons as many times as wanted, reaching the subject-related materials without being dependent on time and place, testing oneself and communicating with the teacher and other students out of the school. The interviews also revealed that there were various problems though such as lack of Internet connection at home and problems experienced while playing the videos.

  19. Irrigoscopy - irrigography method, dosimetry and radiation shielding

    Zubanov, Z.; Kolarevic, G.

    1999-01-01

    Use of patient's radiation shielding during radiology diagnostic procedures in our country is insufficiently represent, so patients needlessly receive very high entrance skin doses in body areas which are not in direct x-ray beam. During irrigoscopy, patient's radiation shielding is very complex problem, because of the organs position. In the future that problem must be solved. We hope that some of our suggestions about patient's radiation shielding during irrigoscopy, can be a small step in that way. (author)

  20. Energy Design Guidelines for High Performance Schools: Tropical Island Climates

    2004-11-01

    The Energy Design Guidelines for High Performance Schools--Tropical Island Climates provides school boards, administrators, and design staff with guidance to help them make informed decisions about energy and environmental issues important to school systems and communities. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school in tropical island climates. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs.

  1. The Treatment of Wealth Distribution by High School Economics Textbooks

    Neumann, Richard

    2014-01-01

    This article presents findings from an investigation of the treatment of wealth distribution by high school economics textbooks. The eight leading high school economics texts in the United States were examined.

  2. Design of emergency shield

    Soliman, S.E.

    1993-01-01

    Manufacturing of an emergency movable shield in the hot laboratories center is urgently needed for the safety of personnel in case of accidents or spilling of radioactive materials. In this report, a full design for an emergency shield is presented and the corresponding dose rates behind the shield for different activities (from 1 mCi to 5 Ci) was calculated by using micro shield computer code. 4 figs., 1 tab

  3. Electromagnetically shielded building

    Takahashi, T.; Nakamura, M.; Yabana, Y.; Ishikawa, T.; Nagata, K.

    1992-01-01

    This invention relates to a building having an electromagnetic shield structure well-suited for application to an information network system utilizing electromagnetic waves, and more particularly to an electromagnetically shielded building for enhancing the electromagnetic shielding performance of an external wall. 6 figs

  4. Electromagnetically shielded building

    Takahashi, T; Nakamura, M; Yabana, Y; Ishikawa, T; Nagata, K

    1992-04-21

    This invention relates to a building having an electromagnetic shield structure well-suited for application to an information network system utilizing electromagnetic waves, and more particularly to an electromagnetically shielded building for enhancing the electromagnetic shielding performance of an external wall. 6 figs.

  5. Success Despite Socioeconomics: A Case Study of a High-Achieving, High-Poverty School

    Tilley, Thomas Brent; Smith, Samuel J.; Claxton, Russell L.

    2012-01-01

    This case study of a high-achieving, high-poverty school describes the school's leadership, culture, and programs that contributed to its success. Data were collected from two surveys (the School Culture Survey and the Vanderbilt Assessment of Leadership in Education), observations at the school site, and interviews with school personnel. The…

  6. Blended Learning and Student Engagement in an Urban High School

    Johnson, Courtney

    2017-01-01

    A metropolitan school district wanted to understand blended learning as it existed in one of their high schools. Blended learning had been school-wide for four years, and district administrators wanted to know how students, teachers, and school administrators perceived blended learning and its impact on student engagement. This was a…

  7. Humanizing the High School: The Power of Peers.

    Stader, David L.; Gagnepain, F. J.

    2000-01-01

    Discusses what high schools can do to improve student relationships, highlighting a St. Louis area school's efforts to develop peer-mentoring and peer-mediation programs. Offers guidelines to help other schools develop a school culture that promotes caring, teaches constructive conflict resolution, and reduces potential for violence. (MLH)

  8. Gay Youth in American Public High Schools: Invisible Diversity.

    Reed, Donald B.

    Gay youth enter high school with the knowledge that they are different and with the belief that heterosexuality is normal and that homosexuality is not normal. Also, gay youth enter high school with the belief that honesty and integrity are important personal values. Additionally, the gay youth enter high school without family knowledge of their…

  9. TOCUSO: Test of Conceptual Understanding on High School Optics Topics

    Akarsu, Bayram

    2012-01-01

    Physics educators around the world often need reliable diagnostic materials to measure students' understanding of physics concept in high school. The purpose of this study is to evaluate a new diagnostic tool on High School Optics concept. Test of Conceptual Understanding on High School Optics (TOCUSO) consists of 25 conceptual items that measures…

  10. Development of neutron shielding concrete containing iron content materials

    Sariyer, Demet; Küçer, Rahmi

    2018-02-01

    Concrete is one of the most important construction materials which widely used as a neutron shielding. Neutron shield is obtained of interaction with matter depends on neutron energy and the density of the shielding material. Shielding properties of concrete could be improved by changing its composition and density. High density materials such as iron or high atomic number elements are added to concrete to increase the radiation resistance property. In this study, shielding properties of concrete were investigated by adding iron, FeB, Fe2B, stainless - steel at different ratios into concrete. Neutron dose distributions and shield design was obtained by using FLUKA Monte Carlo code. The determined shield thicknesses vary depending on the densities of the mixture formed by the additional material and ratio. It is seen that a combination of iron rich materials is enhanced the neutron shielding of capabilities of concrete. Also, the thicknesses of shield are reduced.

  11. Radiation shielding application of lead glass

    Nathuram, R.

    2017-01-01

    Nuclear medicine and radiotherapy centers equipped with high intensity X-ray or teletherapy sources use lead glasses as viewing windows to protect personal from radiation exposure. Lead is the main component of glass which is responsible for shielding against photons. It is therefore essential to check the shielding efficiency before they are put in use. This can be done by studying photon transmission through the lead glasses. The study of photon transmission in shielding materials has been an important subject in medical physics and is potential useful in the development of radiation shielding materials

  12. The Availability and Utilization of School Library Resources in Some Selected Secondary Schools (High School) in Rivers State

    Owate, C. N.; Iroha, Okpa

    2013-01-01

    This study investigates the availability and utilization of school library resources by Secondary School (High School) Students. Eight Selected Secondary Schools in Rivers State, Nigeria were chosen based on their performance in external examinations and geographic locations. In carrying out the research, questionnaires were administered to both…

  13. School Variables as Mediators of Personal and Family Factors on School Violence in Taiwanese Junior High Schools

    Chen, Ji-Kang; Astor, Ron Avi

    2012-01-01

    Using a nationally representative sample of 3,058 junior high school students in Taiwan, this study examines a model of how personal traits, family factors, and school dynamics influence school violence committed by students against students and teachers. This model proposed that school violence is directly influenced by personal traits,…

  14. Electromagnetic shielding formulae

    Dahlberg, E.

    1979-02-01

    This addendum to an earlier collection of electromagnetic shielding formulae (TRITA-EPP-75-27) contains simple transfer matrices suitable for calculating the quasistatic shielding efficiency for multiple transverse-field and axial-field cylindrical and spherical shields, as well as for estimating leakage fields from long coaxial cables and the normal-incidence transmission of a plane wave through a multiple plane shield. The differences and similarities between these cases are illustrated by means of equivalent circuits and transmission line analogies. The addendum also includes a discussion of a possible heuristic improvement of some shielding formulae. (author)

  15. Shielding benchmark problems, (2)

    Tanaka, Shun-ichi; Sasamoto, Nobuo; Oka, Yoshiaki; Shin, Kazuo; Tada, Keiko.

    1980-02-01

    Shielding benchmark problems prepared by Working Group of Assessment of Shielding Experiments in the Research Committee on Shielding Design in the Atomic Energy Society of Japan were compiled by Shielding Laboratory in Japan Atomic Energy Research Institute. Fourteen shielding benchmark problems are presented newly in addition to twenty-one problems proposed already, for evaluating the calculational algorithm and accuracy of computer codes based on discrete ordinates method and Monte Carlo method and for evaluating the nuclear data used in codes. The present benchmark problems are principally for investigating the backscattering and the streaming of neutrons and gamma rays in two- and three-dimensional configurations. (author)

  16. The Active Muon Shield

    Bezshyiko, Iaroslava

    2016-01-01

    In the SHiP beam-dump of the order of 1011 muons will be produced per second. An active muon-shield is used to magnetically deflect these muons out of the acceptance of the spectrom- eter. This note describes how this shield is modelled and optimized. The SHiP spectrometer is being re-optimized using a conical decay-vessel, and utilizing the possibility to magnetize part of the beam-dump shielding iron. A shield adapted to these new conditions is presented which is significantly shorter and lighter than the shield used in the Technical Proposal (TP), while showing a similar performance.

  17. The physical activity climate in Minnesota middle and high schools.

    Samuelson, Anne; Lytle, Leslie; Pasch, Keryn; Farbakhsh, Kian; Moe, Stacey; Sirard, John Ronald

    2010-11-01

    This article describes policies, practices, and facilities that form the physical activity climate in Minneapolis/St. Paul, Minnesota metro area middle and high schools and examines how the physical activity climate varies by school characteristics, including public/private, school location and grade level. Surveys examining school physical activity practices, policies and environment were administered to principals and physical education department heads from 115 middle and high schools participating in the Transdisciplinary Research on Energetics and Cancer-Identifying Determinants of Eating and Activity (TREC-IDEA) study. While some supportive practices were highly prevalent in the schools studied (such as prohibiting substitution of other classes for physical education); other practices were less common (such as providing opportunity for intramural (noncompetitive) sports). Public schools vs. private schools and schools with a larger school enrollment were more likely to have a school climate supportive of physical activity. Although schools reported elements of positive physical activity climates, discrepancies exist by school characteristics. Of note, public schools were more than twice as likely as private schools to have supportive physical activity environments. Establishing more consistent physical activity expectations and funding at the state and national level is necessary to increase regular school physical activity.

  18. Properties of B4C–PbO–Al(OH)3-epoxy nanocomposite prepared by ultrasonic dispersion approach for high temperature neutron shields

    Lee, M.K.; Lee, J.K.; Kim, J.W.; Lee, G.J.

    2014-01-01

    High functional epoxy nanocomposites with three different filler materials, i.e., B 4 C, PbO, and Al(OH) 3 , were fabricated using an effective fabrication method consisting of an ultrasonic dispersion of nanoparticles in low-viscosity hardener and a subsequent mixing of a hardener-nanoparticle colloid with epoxy resins. It was confirmed that this approach provided not only an uniform dispersion but also an excellent wetting with enhanced interfacial adhesion of nano-particulate fillers within the matrix. By incorporating those three fillers, a synergistic effect was verified in multiple properties such as mechanical strength properties, thermal degradation, flame retardancy, and radiation shielding performance

  19. European School of High-Energy Physics

    2006-01-01

    The European School of High-Energy Physics is intended to give young experimental physicists an introduction to the theoretical aspects of recent advances in elementary particle physics. These proceedings contain lectures notes on field theory and the Standard Model, quantum chromodynamics, flavour physics and CP violation, experimental aspects of CP violation in K and B decays, relativistic heavy-ion physics, and the scientific programme of the Joint Institute for Nuclear Research. These core scientific topics are complemented by a lecture about the physics of ski jumping.

  20. Facebook and socializing among high school students

    Kordić, Boris; Babić, Lepa

    2011-01-01

    Facebook is currently the most popular friend-networking site in the world. The concept of friends on social networking site does not coincide with the notion of friends in real life. Nevertheless, Facebook is a social network that is based on real friends with the possibility of accepting strangers. In a study on a sample of 150 pupils from High School of Economics, we found that all have a profile on Facebook, the majority spends two hours a day on Facebook and has over a hundred Facebook f...

  1. Experimental Studies of the Aerothermal Characteristics of the Project Orion CEV heat Shield in High Speed Transitional and Turbulent Flows

    Wadhams, T.P.; MacLean, M.; Holden, M.S.; Cassady, A.M.

    2009-01-01

    An experimental program has been completed by CUBRC exploring laminar, transitional, and turbulent flows over a 7.0% scale model of the Project ORION CEV geometry. This program was executed primarily to answer questions concerning the increase in heat transfer on the windward, or "hot shoulder" of the CEV heat shield from laminar to turbulent flow. To answer these questions CUBRC constructed and instrumented a 14.0 inch diameter Project ORION CEV model and ran a range of Reynolds numbers based on diameter from 1.0 to over 40 million at a Mach number of 8.0. These Reynolds numbers were selected to cover laminar to turbulent heating data on the "hot shoulder". Data obtained during these runs will be used to guide design decisions as they apply to heat shield thickness and extent. Several experiments at higher enthalpies were achieved to obtain data for code validation with real gas effects and transition. CUBRC also performed computation studies of these experiments to aid in the data reduction process and study turbulence modeling.

  2. Unified aeroacoustics analysis for high speed turboprop aerodynamics and noise. Volume 2: Development of theory for wing shielding

    Amiet, R. K.

    1991-01-01

    A unified theory for aerodynamics and noise of advanced turboprops is presented. The theory and a computer code developed for evaluation at the shielding benefits that might be expected by an aircraft wing in a wing-mounted propeller installation are presented. Several computed directivity patterns are presented to demonstrate the theory. Recently with the advent of the concept of using the wing of an aircraft for noise shielding, the case of diffraction by a surface in a flow has been given attention. The present analysis is based on the case of diffraction of no flow. By combining a Galilean and a Lorentz transform, the wave equation with a mean flow can be reduced to the ordinary equation. Allowance is also made in the analysis for the case of a swept wing. The same combination of Galilean and Lorentz transforms lead to a problem with no flow but a different sweep. The solution procedures for the cases of leading and trailing edges are basically the same. Two normalizations of the solution are given by the computer program. FORTRAN computer programs are presented with detailed documentation. The output from these programs compares favorably with the results of other investigators.

  3. Predicting Parental Home and School Involvement in High School African American Adolescents

    Hayes, DeMarquis

    2011-01-01

    Predictors of parental home and school involvement for high school adolescents were examined within two groups of urban African American parents from various socioeconomic levels. Home involvement was defined as parent-adolescent communication about school and learning, while school involvement was defined in terms of parent attendance and…

  4. School District Wellness Policy Quality and Weight-Related Outcomes among High School Students in Minnesota

    Hoffman, Pamela K.; Davey, Cynthia S.; Larson, Nicole; Grannon, Katherine Y.; Hanson, Carlie; Nanney, Marilyn S.

    2016-01-01

    Weight-related outcomes were examined among high school students in Minnesota public school districts according to the quality of district wellness policies. Wellness policy strength and comprehensiveness were scored using the Wellness School Assessment Tool (WellSAT) for 325 Minnesota public school districts in 2013. The associations between…

  5. The Educational Benefits of Attending Higher Performing Schools: Evidence from Chicago High Schools

    Allensworth, Elaine M.; Moore, Paul T.; Sartain, Lauren; de la Torre, Marisa

    2017-01-01

    Policymakers are implementing reforms with the assumption that students do better when attending high-achieving schools. In this article, we use longitudinal data from Chicago Public Schools to test that assumption. We find that the effects of attending a higher performing school depend on the school's performance level. At elite public schools…

  6. Total Quality Management (TQM) Practices and School Climate amongst High, Average and Low Performance Secondary Schools

    Ismail, Siti Noor

    2014-01-01

    Purpose: This study attempted to determine whether the dimensions of TQM practices are predictors of school climate. It aimed to identify the level of TQM practices and school climate in three different categories of schools, namely high, average and low performance schools. The study also sought to examine which dimensions of TQM practices…

  7. Bullying Victimization and Student Engagement in Elementary, Middle, and High Schools: Moderating Role of School Climate

    Yang, Chunyan; Sharkey, Jill D.; Reed, Lauren A.; Chen, Chun; Dowdy, Erin

    2018-01-01

    Bullying is the most common form of school violence and is associated with a range of negative outcomes, including traumatic responses. This study used hierarchical linear modeling to examine the multilevel moderating effects of school climate and school level (i.e., elementary, middle, and high schools) on the association between bullying…

  8. Effects of Part-Time Work on School Achievement During High School

    Singh, Kusum; Chang, Mido; Dika, Sandra

    2007-01-01

    The authors explored the effects of part-time work on school achievement during high school. To estimate the true effects of part-time work on school grades, the authors included family background, students' educational aspirations, and school engagement as controls. Although a substantial literature exists on the relationship of part-time work…

  9. High School Graduation Rates:Alternative Methods and Implications

    Jing Miao; Walt Haney

    2004-01-01

    The No Child Left Behind Act has brought great attention to the high school graduation rate as one of the mandatory accountability measures for public school systems. However, there is no consensus on how to calculate the high school graduation rate given the lack of longitudinal databases that track individual students. This study reviews literature on and practices in reporting high school graduation rates, compares graduation rate estimates yielded from alternative methods, and estimates d...

  10. The Relationships among the Fine Arts, School Culture, and High School Graduation Rates in Georgia

    Lovett, Andrew, Jr.

    2014-01-01

    High school graduation is the single largest hurdle that students must achieve to prepare for college and career (National Governor's Association, 2011). Fleischman & Heppen (2009) agree that American high schools must address the problem of declining graduation rate. Approximately 1.28 million students drop out of high school annually (Amos,…

  11. Shopping Problems among High School Students

    Grant, Jon E.; Potenza, Marc N.; Krishnan-Sarin, Suchitra; Cavallo, Dana A.; Desai, Rani A.

    2010-01-01

    Background Although shopping behavior among adolescents is normal, for some the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. Methods A large sample of high school students (n=3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. Results The overall prevalence of problem shopping was 3.5% (95%CI: 2.93–4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Conclusion Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. PMID:21497217

  12. Shopping problems among high school students.

    Grant, Jon E; Potenza, Marc N; Krishnan-Sarin, Suchitra; Cavallo, Dana A; Desai, Rani A

    2011-01-01

    Although shopping behavior among adolescents is normal, for some, the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. A large sample of high school students (n = 3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. The overall prevalence of problem shopping was 3.5% (95% CI, 2.93-4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. The School Absenteeism among High School Students: Contributing Factors

    Balkis, Murat; Arslan, Gökmen; Duru, Erdinç

    2016-01-01

    The aim of this study was to examine the direct and indirect relationship between student school absenteeism, personal factors (academic self- perception, attitudes towards teacher and school, goal valuation and motivation/ self-regulation), family factors (parents' educational level and income), and academic achievement in structural equation…

  14. Case Study: North Laurel High School, London, Kentucky.

    Southern Regional Education Board, Atlanta, GA.

    When North Laurel High School, London, Kentucky, opened in Fall 1992, students and teachers entered a new facility and a new era of commitment to excellence for all students. In Spring 1993, North Laurel joined the Southern Regional Education Board's High Schools That Work initiative. The new school replaced the general track and raised graduation…

  15. Attitudes of Turkish High School Students toward Mathematics

    Yenilmez, Kursat

    2007-01-01

    This study examines high school students' attitudes toward mathematics and analyzes whether there were differences in attitude and its source that could be attributed to gender, class level, type of school, mathematics success, whether the students received preschool education, families' income level, and high school student's place of living.…

  16. A Workshop for High School Students on Naive Set Theory

    Wegner, Sven-Ake

    2014-01-01

    In this article we present the prototype of a workshop on naive set theory designed for high school students in or around the seventh year of primary education. Our concept is based on two events which the author organized in 2006 and 2010 for students of elementary school and high school, respectively. The article also includes a practice report…

  17. Examining the Internet Addiction Levels of High School Senior Students

    Aydemir, Hasan

    2018-01-01

    In the present study, the internet addiction status of high school senior students in Yesilyurt county of Malatya was analyzed and examined in terms of gender variable. The study population consisted of 3442 senior students who were studying at 37 high schools in state schools in Yesilyurt County of the city of Malatya in 2016-2017 academic year.…

  18. Mental skills of South African male high school rugby players ...

    The aim of this study was to establish preliminary South African high school rugby norms for the BMSQ. The sample consisted of 152 male high school rugby players from two schools in the Ethekwini region. Preliminary norms are presented in the form of means and standard deviations. Results are compared with those of ...

  19. Aggressive Students and High School Dropout: An Event History Analysis

    Orozco, Steven R.

    2016-01-01

    Aggressive students often struggle in multiple domains of their school functioning and are at increased risk for high school dropout. Research has identified a variety of warning flags which are strong predictors of high school dropout. While it is known that aggressive students exhibit many of these warning flags, there is little research which…

  20. The High School Dropout Problem: Perspectives of Teachers and Principals

    Bridgeland, John M.; Dilulio, John J., Jr.; Balfanz, Robert

    2009-01-01

    To better understand the views of teachers and administrators on the high school dropout problem, focus groups and nationally representative surveys were conducted of high school teachers and principals. A focus group of superintendents and school board members was also included. To help interpret the results, the authors convened a colloquium…

  1. "Higher Expectations" in the Catholic Inner City High School.

    Harkins, William

    1987-01-01

    Considers the implications of statistics on death and poverty in minority communities for Catholic high schools with large minority populations. Sees hope at the heart of the Catholic high school. Discusses how teachers, school climate, and careful curriculum design can help instill this hope in the students. (DMM)

  2. Sexuality Education in Junior High Schools in Japan

    Hashimoto, N.; Shinohara, H.; Tashiro, M.; Suzuki, S.; Hirose, H.; Ikeya, H.; Ushitora, K.; Komiya, A.; Watanabe, M.; Motegi, T.; Morioka, M.

    2012-01-01

    This paper aims to determine via responses to three questionnaire surveys how sexuality education programs are conducted at junior high schools in Japan. Study 1 examined the practice of sexuality education in schools, Study 2 investigated junior high school students' (age 12-13 and 14-15 years) knowledge of sexuality, and Study 3 examined…

  3. The Characteristics of High School Department Chairs: A National Perspective

    DeAngelis, Karen J.

    2013-01-01

    Department chairs occupy a potentially important leadership position in high schools, yet little is known about them, particularly with regard to who they are and how they compare to other high school teachers. This is surprising given growing expectations for distributed leadership practice in schools. In this study, I utilize a national dataset…

  4. Software Tools for Measuring and Calculating Electromagnetic Shielding Effectiveness

    Tesny, Neal

    2005-01-01

    The evaluation and the analysis of high-altitude electromagnetic pulse response of shielded enclosures require the availability of software tools able to acquire data and calculate shielding effectiveness...

  5. Middle School Teachers and School Leadership Perceptions of School Culture: An Examination of the Transition from Junior Highs to Middle Schools

    Chaney, Maura Chase

    2013-01-01

    The purpose of this case study was to examine the transition from junior high school to a middle school as experienced in two middle schools from a mid-sized urban school district located in the Rocky Mountains. The overarching question that guided data collection for this study centered on the factors that influenced school culture before,…

  6. High School Physics Availability: Results from the 2012-13 Nationwide Survey of High School Physics Teachers. Focus On

    White, Susan; Tesfaye, Casey Langer

    2014-01-01

    In this report, the authors share their analysis of the data from over 3,500 high schools in the U.S. beginning with an examination of the availability of physics in U.S. high schools. The schools in their sample are a nationally-representative random sample of the almost 25,000 high schools in forty-nine of the fifty states. Table 1 shows the…

  7. Thermal neutron shield and method of manufacture

    Brindza, Paul Daniel; Metzger, Bert Clayton

    2013-05-28

    A thermal neutron shield comprising concrete with a high percentage of the element Boron. The concrete is least 54% Boron by weight which maximizes the effectiveness of the shielding against thermal neutrons. The accompanying method discloses the manufacture of Boron loaded concrete which includes enriching the concrete mixture with varying grit sizes of Boron Carbide.

  8. Radiation shielding for fission reactors

    Oka, Yoshiaki [Tokyo Univ., Nuclear Engineering Research Laboratory, Tokyo (Japan)

    2000-03-01

    Radiation shielding aspects relating fission reactors have been reviewed. Domestic activities in the past five years have been mainly described concerning nuclear data, calculation methods, shielding and skyshine experiments, Advanced Boiling Water Reactor (ABWR), Advanced Pressurized Water Reactor (APWR), High Temperature Engineering Test Reactor (HTTR), Experimental and Prototype Fast Reactors (JOYO, MONJU), Demonstration FBR, core shroud replacement of BWR, and spent fuel transportation cask and vessel. These studies have valuable information in safety and cost reduction issues of fission reactor design for not only existing reactors but also new reactor concepts in the next century. It has been concluded that we should maintain existing shielding technologies and improve these data and methods for coming generations in the next millennium. (author)

  9. Energy Design Guidelines for High Performance Schools: Tropical Island Climates

    None

    2004-11-01

    Design guidelines outline high performance principles for the new or retrofit design of K-12 schools in tropical island climates. By incorporating energy improvements into construction or renovation plans, schools can reduce energy consumption and costs.

  10. prevalence of substance use among rural high school students

    Administrator

    School of Public Health, University of the Limpopo. Sovenga, South Africa ... KEY WORDS: substance use, rural high school students, South Africa ... increased into the 1990s, these behaviours ..... Canada's Mental Health Supplement, 68,. 12.

  11. Astronomy Education Project for Guangdong High Schools F. P. Pi ...

    School of Physics and Electronic Engineering, Guangzhou University, ... an astronomy education project for high school teachers and students was initiated ... ipality, universities and research institutes, professional and amateur astronomical.

  12. Neutron shield analysis and design for the PDX fusion facility

    Grimesey, R.A.; Nigg, D.W.; Scott, A.J.; Wheeler, F.J.; Jassby, D.L.; Perry, E.D.

    1979-01-01

    The basic component of the biological shield for PDX is an existing 81 cm thick high-density concrete shielding wall surrounding the machine. The principal additional shielding requirement is a roof shield over the machine to reduce air-scattered skyshine dose into the PDX control room and to the site boundary. The roof shield is designed in removable sections on a steel support structure permitting overhead crane access to major PDX components. After analysis of a number of alternate concepts, a roof shield consisting of 50 cm of water in polyethylene tanks was selected to meet design objectives of effectiveness, weight, removability, and cost

  13. A study on the shielding element using Monte Carlo simulation

    Kim, Ki Jeong [Dept. of Radiology, Konkuk University Medical Center, Seoul (Korea, Republic of); Shim, Jae Goo [Dept. of Radiologic Technology, Daegu Health College, Daegu (Korea, Republic of)

    2017-06-15

    In this research, we simulated the elementary star shielding ability using Monte Carlo simulation to apply medical radiation shielding sheet which can replace existing lead. In the selection of elements, mainly elements and metal elements having a large atomic number, which are known to have high shielding performance, recently, various composite materials have improved shielding performance, so that weight reduction, processability, In consideration of activity etc., 21 elements were selected. The simulation tools were utilized Monte Carlo method. As a result of simulating the shielding performance by each element, it was estimated that the shielding ratio is the highest at 98.82% and 98.44% for tungsten and gold.

  14. Safety guide data on radiation shielding in a reprocessing facility

    Sekiguchi, Noboru; Naito, Yoshitaka

    1986-04-01

    In a reprocessing facility, various radiation sources are handled and have many geometrical conditions. To aim drawing up a safety guidebook on radiation shielding in order to evaluate shielding safety in a reprocessing facility with high reliability and reasonableness, JAERI trusted investigation on safety evaluation techniques of radiation shielding in a reprocessing facility to Nuclear Safety Research Association. This report is the collection of investigation results, and describes concept of shielding safety design principle, radiation sources in reprocessing facility and estimation of its strength, techniques of shielding calculations, and definite examples of shielding calculation in reprocessing facility. (author)

  15. Passive magnetic shielding in MRI-Linac systems

    Whelan, Brendan; Kolling, Stefan; Oborn, Brad M.; Keall, Paul

    2018-04-01

    Passive magnetic shielding refers to the use of ferromagnetic materials to redirect magnetic field lines away from vulnerable regions. An application of particular interest to the medical physics community is shielding in MRI systems, especially integrated MRI-linear accelerator (MRI-Linac) systems. In these systems, the goal is not only to minimize the magnetic field in some volume, but also to minimize the impact of the shield on the magnetic fields within the imaging volume of the MRI scanner. In this work, finite element modelling was used to assess the shielding of a side coupled 6 MV linac and resultant heterogeneity induced within the 30 cm diameter of spherical volume (DSV) of a novel 1 Tesla split bore MRI magnet. A number of different shield parameters were investigated; distance between shield and magnet, shield shape, shield thickness, shield length, openings in the shield, number of concentric layers, spacing between each layer, and shield material. Both the in-line and perpendicular MRI-Linac configurations were studied. By modifying the shield shape around the linac from the starting design of an open ended cylinder, the shielding effect was boosted by approximately 70% whilst the impact on the magnet was simultaneously reduced by approximately 10%. Openings in the shield for the RF port and beam exit were substantial sources of field leakage; however it was demonstrated that shielding could be added around these openings to compensate for this leakage. Layering multiple concentric shield shells was highly effective in the perpendicular configuration, but less so for the in-line configuration. Cautious use of high permeability materials such as Mu-metal can greatly increase the shielding performance in some scenarios. In the perpendicular configuration, magnetic shielding was more effective and the impact on the magnet lower compared with the in-line configuration.

  16. Wake Shield Target Protection

    Valmianski, Emanuil I.; Petzoldt, Ronald W.; Alexander, Neil B.

    2003-01-01

    The heat flux from both gas convection and chamber radiation on a direct drive target must be limited to avoid target damage from excessive D-T temperature increase. One of the possibilities of protecting the target is a wake shield flying in front of the target. A shield will also reduce drag force on the target, thereby facilitating target tracking and position prediction. A Direct Simulation Monte Carlo (DSMC) code was used to calculate convection heat loads as boundary conditions input into ANSYS thermal calculations. These were used for studying the quality of target protection depending on various shapes of shields, target-shield distance, and protective properties of the shield moving relative to the target. The results show that the shield can reduce the convective heat flux by a factor of 2 to 5 depending on pressure, temperature, and velocity. The protective effect of a shield moving relative to the target is greater than the protective properties of a fixed shield. However, the protective effect of a shield moving under the drag force is not sufficient for bringing the heat load on the target down to the necessary limit. Some other ways of diminishing heat flux using a protective shield are discussed

  17. Predicting High School Completion Using Student Performance in High School Algebra: A Mixed Methods Research Study

    Chiado, Wendy S.

    2012-01-01

    Too many of our nation's youth have failed to complete high school. Determining why so many of our nation's students fail to graduate is a complex, multi-faceted problem and beyond the scope of any one study. The study presented herein utilized a thirteen-step mixed methods model developed by Leech and Onwuegbuzie (2007) to demonstrate within a…

  18. Conceptual problem solving in high school physics

    Docktor, Jennifer L.; Strand, Natalie E.; Mestre, José P.; Ross, Brian H.

    2015-12-01

    Problem solving is a critical element of learning physics. However, traditional instruction often emphasizes the quantitative aspects of problem solving such as equations and mathematical procedures rather than qualitative analysis for selecting appropriate concepts and principles. This study describes the development and evaluation of an instructional approach called Conceptual Problem Solving (CPS) which guides students to identify principles, justify their use, and plan their solution in writing before solving a problem. The CPS approach was implemented by high school physics teachers at three schools for major theorems and conservation laws in mechanics and CPS-taught classes were compared to control classes taught using traditional problem solving methods. Information about the teachers' implementation of the approach was gathered from classroom observations and interviews, and the effectiveness of the approach was evaluated from a series of written assessments. Results indicated that teachers found CPS easy to integrate into their curricula, students engaged in classroom discussions and produced problem solutions of a higher quality than before, and students scored higher on conceptual and problem solving measures.

  19. Breakfast Composition in Junior High School Students

    Sheila Devi

    2015-12-01

    Full Text Available Background: Adolescence is a time of rapid development that requires higher nutrient intake levels than in adulthood. However the habit of skipping breakfast has become very popular among adolescents. Skipping breakfast has negative effects such as difficulty in concentrating, growth impairment and decrease academic performance. Therefore, this study was conducted to identify the breakfast composisition of early adolescents in Jatinangor, Sumedang, Indonesia. Methods: A cross sectional study with non-probability sampling method, was conducted in a junior high school Jatinangor during the month of July 2013. Ninety six participants were included in this study. All the participants underwent an interview about the food intake for breakfast in seven days using eating pattern recall guidelines. Results: Overall, 37% of the respondents skipped breakfast. The mean of total calories among the adolescents who consumed breakfast was 286.06 (187.89 kcal. The amount of carbohydrate, fat and protein consumed was 29.23 (19.93 gram, 13.93 (13.29 gram and 8.78 (6.11 gram accordingly. The main reason for adolescent to skip breakfast was lack of time. Conclusions: Majority of the respondents have their breakfast before they go to school. Overall, the total calories comsumed is sufficient however the amount of protein consumed is low.

  20. Conceptual problem solving in high school physics

    Jennifer L. Docktor

    2015-09-01

    Full Text Available Problem solving is a critical element of learning physics. However, traditional instruction often emphasizes the quantitative aspects of problem solving such as equations and mathematical procedures rather than qualitative analysis for selecting appropriate concepts and principles. This study describes the development and evaluation of an instructional approach called Conceptual Problem Solving (CPS which guides students to identify principles, justify their use, and plan their solution in writing before solving a problem. The CPS approach was implemented by high school physics teachers at three schools for major theorems and conservation laws in mechanics and CPS-taught classes were compared to control classes taught using traditional problem solving methods. Information about the teachers’ implementation of the approach was gathered from classroom observations and interviews, and the effectiveness of the approach was evaluated from a series of written assessments. Results indicated that teachers found CPS easy to integrate into their curricula, students engaged in classroom discussions and produced problem solutions of a higher quality than before, and students scored higher on conceptual and problem solving measures.

  1. Heads Up to High School Sports

    ... submit" value="Submit" /> HEADS UP to School Sports Recommend on Facebook Tweet Share Compartir To help ... organizations, developed the HEADS UP: Concussion in School Sports initiative and materials. Specific Concussion Information for... Coaches ...

  2. Adolescent Views of Time Management: Rethinking the School Day in Junior High School

    Strom, Paris S.; Strom, Robert D.; Sindel-Arrington, Tricia

    2016-01-01

    Junior high school presents a significant increase in time demands both for study and for social relationships. The students (N = 240) in grades 7 and 8 at a junior high school anonymously completed online the Time Management Poll concerning their own use of time and the way their school managed time. The 20 items in the poll allowed them to…

  3. A Positive Model for Reducing and Preventing School Burnout in High School Students

    Aypay, Ayse

    2017-01-01

    This study aims to develop and test the validity of a model limited to attitude towards the future and subjective well-being for reducing and preventing the school burnout that high school students can experience. The study is designed as a relational screening model conducted over 389 high school students. The data in this study are analyzed…

  4. Effects of High School Students' Perceptions of School Life Quality on Their Academic Motivation Levels

    Akin Kösterelioglu, Meltem; Kösterelioglu, Ilker

    2015-01-01

    This study aims to identify the effects of high school students' perceptions of school life quality on their academic motivation levels. The study was conducted on a sample of high school students (n = 2371) in Amasya Province in the fall semester of 2013-2014 academic year. Study sample was selected with the help of cluster sampling method. Data…

  5. A Study of Democratic School Culture Perceptions of Sport High School Students

    Isikgöz, Enes

    2016-01-01

    In this study; the perceptions of the students studying at sport high schools about democratic school culture were analysed in accordance with different variables. Participants of the research consisted of 216 students studying at Sport High Schools in Sakarya and Batman Provinces of Turkey. The data were collected with the Democratic School…

  6. School-Related Variables in the Dimensions of Anger in High School Students in Turkey

    Siyez, Digdem M.

    2018-01-01

    The study aimed to examine the effects of perceived social support from teachers, expectation of academic achievement, school control, and gender on anger dimensions in high school students in Izmir, Turkey. In total, 446 high school students (234 girls, 212 boys) participated in the study. Pearson's correlation and multiple regression analyses…

  7. School Reform in a High Poverty Elementary School: A Grounded Theory Case Study of Capacity Building

    Dodman, Stephanie Lynn

    2011-01-01

    There is a persistent and significant gap in the achievement of students who attend high-poverty schools and those who attend low-poverty schools. Students in high-poverty schools, the majority of whom are African American and Hispanic, are not achieving the same levels of academic success as their low-poverty or White counterparts. Retention…

  8. School-Based Drug Abuse Prevention Programs in High School Students

    Sharma, Manoj; Branscum, Paul

    2013-01-01

    Drug abuse, or substance abuse, is a substantial public health problem in the United States, particularly among high school students. The purpose of this article was to review school-based programs implemented in high schools for substance abuse prevention and to suggest recommendations for future interventions. Included were English language…

  9. Investigating the Link between Home-School Dissonance and Academic Cheating among High School Students

    Brown-Wright, Lynda; Tyler, Kenneth M.; Stevens-Watkins, Danelle; Thomas, Deneia; Mulder, Shambra; Hughes, Travonia; Stevens-Morgan, Ruby; Roan-Belle, Clarissa; Gadson, Nadia; Smith, La Toya

    2013-01-01

    The current study examined the association between home-school dissonance and academic cheating among 344 high school juniors and seniors at two urban high schools. Students completed two subscales of the Patterns of Adaptive Learning Scale (PALS) and one subscale of the Academic Motivation Scale (AMS). Analyses revealed that home-school…

  10. Health behaviors of Bydgoszcz high school graduates

    Alicja Kostencka

    2016-10-01

    Full Text Available Lifestyle affects the physical, mental, social development, health and learning ability. It seems that there are differences in the health behaviors  of young females and males, however these differences are not well described. The aim of the current study was to assess the lifestyle of eighteen-years old and to compare their health behaviors of young persons according to their gender. The study was conducted among 98 students of high schools in Bydgoszcz (35 females and 68 males. All participants were 18 years old. The questionnaire was prepared especially for the purposes of the study, a part of the questions of this questionnaire was taken from the Canada Fitness Survey. The physical activity, mode of nutrition, use of stimulants, hours of sleep, time spent in front of screens and the level of stress were taken into consideration while assessing the teenagers’ lifestyle. The lifestyle of high school graduates is worrisome. It is characterized by low level of physical activity, irregular nutrition, not enough fruits, vegetables and water consumed. A large group of young people drink alcohol, smoke tobacco and marijuana, sleep too short. Males also spend too many hours in front of a television, computer or other similar device. Differences in the health behaviors of  women and men appear to be significant. The prevalence of alcohol abuse in this group is very high and affects both sexes. The sex differences in the health-promoting behaviors among men and women in this group of adolescents seems to diminish. Observed unhealthy behaviors indicates the urgent need for health education, especially those that educate the student about the value of the person, the value of health, and the development of social skills that underlie personal development. The foremost priority is  risk prevention implementation in primary schools. Further research and continuous monitoring of health behaviors in different age groups  is needed as well as  to

  11. An Approach to Energy Education for High School, Junior High School and Elementary School Students at Aichi Institute of Technology

    Yukita, Kazuto; Ichiyanagi, Katsuhiro; Mori, Tsuyoshi; Goto, Yasuyuki

    This paper discusses the methods of implementation and improvement adopted in the energy education program of “Marugoto Taiken World” (“Total Experience World”) at Aichi Institute of Technology. The program, which is aimed at high school, junior high school and elementary school students, has been carried on at Aichi Institute of Technology for a number of years now, and the authors have been involved in the energy education project for the past four years. During that time, the following four courses have been held : 1) Let's use wind power to generate electricity, 2) Let's use flowers to build a solar battery, 3) Let's use bottles to build a fuel cell battery, 4) Let's make all sorts of batteries.

  12. ITER shielding blanket

    Strebkov, Yu [ENTEK, Moscow (Russian Federation); Avsjannikov, A [ENTEK, Moscow (Russian Federation); Baryshev, M [NIAT, Moscow (Russian Federation); Blinov, Yu [ENTEK, Moscow (Russian Federation); Shatalov, G [KIAE, Moscow (Russian Federation); Vasiliev, N [KIAE, Moscow (Russian Federation); Vinnikov, A [ENTEK, Moscow (Russian Federation); Chernjagin, A [DYNAMICA, Moscow (Russian Federation)

    1995-03-01

    A reference non-breeding blanket is under development now for the ITER Basic Performance Phase for the purpose of high reliability during the first stage of ITER operation. More severe operation modes are expected in this stage with first wall (FW) local heat loads up to 100-300Wcm{sup -2}. Integration of a blanket design with protective and start limiters requires new solutions to achieve high reliability, and possible use of beryllium as a protective material leads to technologies. The rigid shielding blanket concept was developed in Russia to satisfy the above-mentioned requirements. The concept is based on a copper alloy FW, austenitic stainless steel blanket structure, water cooling. Beryllium protection is integrated in the FW design. Fabrication technology and assembly procedure are described in parallel with the equipment used. (orig.).

  13. Radiation shielding concrete

    Kunishima, Shigeru.

    1990-01-01

    The radiation shielding concretes comprise water, cement, fine aggregates consisting of serpentines and blown mist slags, coarse aggregates consisting of serpentines and kneading materials. Since serpentines containing a relatively great amount of water of crystallization in rocks as coarse aggregates and fine aggregates, the hydrogen content in the radiation shielding concretes is increased and the neutron shielding effect is improved. In addition, since serpentines are added as the fine aggregates and blown mists slags of a great specific gravity are used, the specific gravity of the shielding concretes is increased to improve the γ-ray shielding effect. Further, by the use of the kneading material having a water reducing effect and fluidizing effect, and by the bearing effect of the spherical blown mist slags used as the fine aggregates, concrete fluidity can be increased. Accordingly, workability of the radiation shielding concretes can be improved. (T.M.)

  14. Associations of Teen Dating Violence Victimization With School Violence and Bullying Among US High School Students*

    Vivolo-Kantor, Alana M.; Olsen, Emily O’malley; Bacon, Sarah

    2016-01-01

    BACKGROUND Teen dating violence (TDV) negatively impacts health, mental and physical well-being, and school performance. METHODS Data from a nationally representative sample of high school students participating in the Centers for Disease Control and Prevention (CDC)’s 2013 Youth Risk Behavior Survey (YRBS) are used to demonstrate associations of physical and sexual TDV with school violence-related experiences and behaviors, including bullying victimization. Bivariate and adjusted sex-stratified regressions assessed relationships between TDV and school violence-related experiences and behaviors. RESULTS Compared to students not reporting TDV, those experiencing both physical and sexual TDV were more likely to report carrying a weapon at school, missing school because they felt unsafe, being threatened or injured with a weapon on school property, having a physical fight at school, and being bullied on school property. CONCLUSIONS School-based prevention efforts should target multiple forms of violence. PMID:27374352

  15. Virtual Learning Simulations in High School

    Thisgaard, Malene Warming; Makransky, Guido

    2017-01-01

    The present study compared the value of using a virtual learning simulation compared to traditional lessons on the topic of evolution, and investigated if the virtual learning simulation could serve as a catalyst for STEM academic and career development, based on social cognitive career theory....... The investigation was conducted using a crossover repeated measures design based on a sample of 128 high school biology/biotech students. The results showed that the virtual learning simulation increased knowledge of evolution significantly, compared to the traditional lesson. No significant differences between...... the simulation and lesson were found in their ability to increase the non-cognitive measures. Both interventions increased self-efficacy significantly, and none of them had a significant effect on motivation. In addition, the results showed that the simulation increased interest in biology related tasks...

  16. Norwegian High-School Students Internship Programme

    2017-01-01

    The High-School Students Internship Programme (HSSIP is a programme developed by the ECO group’s Teacher and Student Programmes section to engage students from a young age with scientific research and innovation. Norway was selected as one out of five countries for the pilot programmes run in 2017. Out of some 150 applications, 10 boys and 14 girls, from Longyearbyen (Svalbard) in the North to Flekkefjord in the South, were invited to participate in the Norwegian programme that took place from 15 October - 28 October. The youngsters were offered an intense two-week internship at CERN, during which they took part in many diverse activities. Accompanied by mentors, the students got a deeper insight into how CERN supports particle physics by working on their own projects and through a variety of visits.

  17. Lifelines for High School Climate Change Education

    Gould, A. D.

    2012-12-01

    The Lifelines project aims to establish a network of practicing high school teachers actively using climate change curricula by creating professional learning communities (PLCs) of teachers who, through remote meetings and workshops, maintain ongoing communication and sharing of best practices among colleagues to strengthen knowledge and promote effective teaching strategies. The project explores techniques to achieve the most effective teleconferencing meetings and workshops. This promotes not only teaching about minimizing environmental impacts of human activity, but minimizes environmental impacts of professional development — practicing what we preach. To date, Lifelines PLCs have set up websites and e-mail lists for sharing information. Teleconferences and webinars have been held using services such as Skype, ReadyTalk, and Wiggio. Many of the meetings have been recorded and archived for the benefit of members who could not attend in real-time.

  18. School for Young High Energy Physicists

    Evans, M E

    2003-01-01

    Forty-seven experimental particle physicists attended the 2002 Summer School, held, as usual, at The Cosener's House in Abingdon during September. The weather was glorious allowing a number of tutorials and impromptu seminars to take place in the lovely gardens. The lectures were of a high standard and were delivered and received enthusiastically, providing material for lively discussions in tutorials and elsewhere. The students each gave a ten-minute seminar and the general quality of the talks was impressive and the time keeping excellent. The activities described ranged from front-line physics analysis to preparations for the next generation of machines and detectors, and gave a clear indication of the breadth of particle physics activities in the UK

  19. Shielding evaluation of a medical linear accelerator vault in preparation for installing a high-dose rate 252Cf remote after-loader

    Melhus, C. S.; Rivard, M. J.; KurKomelis, J.; Liddle, C. B.; Masse, F. X.

    2005-01-01

    In support of the effort to begin high-dose rate 252 Cf brachytherapy treatments at Tufts-New England Medical Center, the shielding capabilities of a clinical accelerator vault against the neutron and photon emissions from a 1.124 mg 252 Cf source were examined. Outside the clinical accelerator vault, the fast neutron dose equivalent rate was below the lower limit of detection of a CR-39 etched track detector and below 0.14 ± 0.02 μSv h -1 with a proportional counter, which is consistent, within the uncertainties, with natural background. The photon dose equivalent rate was also measured to be below background levels (0.1 μSv h -1 ) using an ionisation chamber and an optically stimulated luminescence dosemeter. A Monte Carlo simulation of neutron transport through the accelerator vault was performed to validate measured values and determine the thermal-energy to low-energy neutron component. Monte Carlo results showed that the dose equivalent rate from fast neutrons was reduced by a factor of 100,000 after attenuation through the vault wall, and the thermal-energy neutron dose equivalent rate would be an additional factor of 1000 below that of the fast neutrons. Based on these findings, the shielding installed in this facility is sufficient for the use of at least 5.0 mg of 252 Cf. (authors)

  20. [Frequency of use of school cafeterias in middle and high schools in 3 French districts].

    Michaud, C; Feur, E; Gerbouin-Rérolle, P; Leynaud-Rouaud, C; Chateil, S; Gourdon, M

    2000-09-01

    Reports from the French Ministry of Education warn of a decrease in the use of school food services, especially in sensitive urban areas. They also suggest that this decline has led to cases of malnutrition. This article describes the characteristics of the current supply of school meals and measures the evolution of demand observed between 1992 and 1996 in relation to the economic situation of students' families. The study was carried out in 3 departments in France: Doubs, Herault, and Val de Marne. The administrators of all public and private middle and high schools in the 3 departments received a questionnaire asking them to describe the services offered in their cafeterias and to provide the corresponding statistical and accounting data. External food services near the schools were also taken into account. Seventy-nine percent of schools responded to the survey. Concerning the services offered, 91% of schools have their own cafeterias, of which 81% are managed by the schools. Concerning the evolution of utilisation, a significant decrease in the number of meals served in seen in middle schools. On the other hand, high schools have observed stable utilisation. The positive changes in utilisation are linked, in middle schools, to characteristics of the schools' internal food services (self-service, choice of main courses, modulation of seats). In high schools, positive changes in the utilisation of school services are linked to the lack of external food services near the schools. As middle schools and high schools control the logistics and management of food services offered to students, they are potentially in a position to influence a policy on this issue. The evolution in utilisation is very different among departments and between middle and high schools. While economic precariousness has a negative structural effect on utilisation, it doesn't seem to be a major factor in the evolution of the decrease observed over the past few years.

  1. Strategic Designs: Lessons from Leading Edge Small Urban High Schools

    Shields, Regis Anne; Miles, Karen Hawley

    2008-01-01

    Education Resource Strategies (ERS) works with school and district leaders to help them more strategically use resources--people, time, and money--to improve student performance. They have found that many school districts begin creating small high schools without a clear sense of how much they will spend or how to ensure that small schools…

  2. High School Harvest: Combining Food Service Training and Institutional Procurement

    Conner, David; Estrin, Hans; Becot, Florence

    2014-01-01

    This article discusses High School Harvest (HSH), an Extension educator-led project in five Vermont schools to provide students with job training and food system education and to provide lightly processed produce to school lunch programs. One hundred and twenty-one students participated, logging 8,752 hours growing, harvesting, and processing…

  3. Inclusive STEM High Schools Increase Opportunities for Underrepresented Students

    Spillane, Nancy K.; Lynch, Sharon J.; Ford, Michael R.

    2016-01-01

    The authors report on a study of eight inclusive STEM high schools that are designed to increase the numbers of students in demographic groups underrepresented in STEM. As STEM schools, they have had broader and deeper STEM coursework (taken by all students) than required by their respective states and school districts; they also had outcome…

  4. Homeless High School Students in America: Who Counts?

    Cumming, John M.; Gloeckner, Gene W.

    2012-01-01

    After interviewing homeless high school students, the research team in a Colorado school district discovered that many students had not revealed their true living conditions (homelessness) to anyone in the school district. This research team developed an anonymous survey written around the homeless categories identified in the McKinney-Vento…

  5. Comal County, Texas: Preparing for Life after High School

    Walter, Frank

    2018-01-01

    Comal County, Texas, may be rural but its students face many of the same challenges as students in urban districts. Communities In Schools of South Central Texas works with the local school district to identify student needs and provide critical supports to help young people prepare for life after high school.

  6. High School Students' Perceptions of Narrative Evaluations as Summative Assessment

    Bagley, Sylvia S.

    2008-01-01

    This study focuses on data collected at "Progressive Secondary School" in Southern California, a high school which uses narrative evaluations and other forms of alternative summative assessment on a school wide basis. Through a survey and personal interviews, students were asked to describe what they liked most and least about the use of…

  7. Teacher Performance Trajectories in High- and Lower-Poverty Schools

    Xu, Zeyu; Özek, Umut; Hansen, Michael

    2015-01-01

    This study explores whether teacher performance trajectory over time differs by school-poverty settings. Focusing on elementary school mathematics teachers in North Carolina and Florida, we find no systematic relationship between school student poverty rates and teacher performance trajectories. In both high- (=60% free/reduced-price lunch [FRPL])…

  8. The anthropometric match between high school learners and ...

    Background: A South African study illustrated that the school computer chair was the least ergonomic aspect of a school computer workstation and this may explain why computer usage was the only predictor of cervical pain among high school students (Smith et al. 2007). An alarming percentage of South African learners ...

  9. San Diego Met High School: Personalization as a Foundation

    Principal Leadership, 2010

    2010-01-01

    The mission of San Diego Met High School is to prepare students for college and the workforce through active learning, academic rigor, and community involvement in a small school setting. Because personalization is a key component of the school culture, advisories of 20-25 students work with the same teachers for all four years. Advisers, parents,…

  10. Plate Waste and Attitudes among High School Lunch Program Participants

    Haas, Jessica; Cunningham-Sabo, Leslie; Auld, Garry

    2014-01-01

    Purpose/Objectives: The purpose of this study was to determine: (1) What foods high school students participating in the National School Lunch Program (NSLP) are discarding the most? (2) How much of these foods they are discarding? and (3) What are their perceptions towards school lunch? Methods: Researchers measured plate waste at two high…

  11. Listening to the Voices of Civically Engaged High School Students

    Preus, Betty; Payne, Rachel; Wick, Carly; Glomski, Emily

    2016-01-01

    This study examines why a group of students representing two high schools became involved in an activist organization, the benefits they gained as a result, the impact they had on their school and community, and their recommendations for how school personnel can foster civic engagement in young people. The student-led group campaigned for a school…

  12. On the High School Education of a Pithecanthropus Erectus

    Steel, Sean

    2014-01-01

    This article examines our modern ways of schooling youth in light of philosophic and personal narrative accounts of "the Dionysian" aspect--a term the author uses to understand his own experiences and aspirations as a high school English teacher. Having articulated the meaning of this term, he goes on to point out how schools today are…

  13. High-Tech School Bus Teaches Students on the Road

    Katims, Lauren

    2011-01-01

    Last year, kindergarten through high school students in the rural Hector, Arkansas, School District barely had the technology resources that keep kids interested in math and science. This year, they potentially have the most advanced resources in the country--before they even step into the classroom. One school bus in Arkansas' Pope County has…

  14. High School Physics Students' Personal Epistemologies and School Science Practice

    Alpaslan, Muhammet Mustafa; Yalvac, Bugrahan; Loving, Cathleen

    2017-11-01

    This case study explores students' physics-related personal epistemologies in school science practices. The school science practices of nine eleventh grade students in a physics class were audio-taped over 6 weeks. The students were also interviewed to find out their ideas on the nature of scientific knowledge after each activity. Analysis of transcripts yielded several epistemological resources that students activated in their school science practice. The findings show that there is inconsistency between students' definitions of scientific theories and their epistemological judgments. Analysis revealed that students used several epistemological resources to decide on the accuracy of their data including accuracy via following the right procedure and accuracy via what the others find. Traditional, formulation-based, physics instruction might have led students to activate naive epistemological resources that prevent them to participate in the practice of science in ways that are more meaningful. Implications for future studies are presented.

  15. Monte Carlo simulations for the shielding of the future high-intensity accelerator facility fair at GSI

    Radon, T.; Gutermuth, F.; Fehrenbacher, G.

    2005-01-01

    The Gesellschaft fuer Schwerionenforschung (GSI) is planning a significant expansion of its accelerator facilities. Compared to the present GSI facility, a factor of 100 in primary beam intensities and up to a factor of 10,000 in secondary radioactive beam intensities are key technical goals of the proposal. The second branch of the so-called Facility for Antiproton and Ion Research (FAIR) is the production of antiprotons and their storage in rings and traps. The facility will provide beam energies a factor of ∼15 higher than presently available at the GSI for all ions, from protons to uranium. The shielding design of the synchrotron SIS 100/300 is shown exemplarily by using Monte Carlo calculations with the FLUKA code. The experimental area serving the investigation of compressed baryonic matter is analysed in the same way. In addition, a dose comparison is made for an experimental area operated with medium energy heavy-ion beams. Here, Monte Carlo calculations are performed by using either heavy-ion primary particles or proton beams with intensities scaled by the mass number of the corresponding heavy-ion beam. (authors)

  16. Monte Carlo simulations for the shielding of the future high-intensity accelerator facility FAIR at GSI.

    Radon, T; Gutermuth, F; Fehrenbacher, G

    2005-01-01

    The Gesellschaft für Schwerionenforschung (GSI) is planning a significant expansion of its accelerator facilities. Compared to the present GSI facility, a factor of 100 in primary beam intensities and up to a factor of 10,000 in secondary radioactive beam intensities are key technical goals of the proposal. The second branch of the so-called Facility for Antiproton and Ion Research (FAIR) is the production of antiprotons and their storage in rings and traps. The facility will provide beam energies a factor of approximately 15 higher than presently available at the GSI for all ions, from protons to uranium. The shielding design of the synchrotron SIS 100/300 is shown exemplarily by using Monte Carlo calculations with the FLUKA code. The experimental area serving the investigation of compressed baryonic matter is analysed in the same way. In addition, a dose comparison is made for an experimental area operated with medium energy heavy-ion beams. Here, Monte Carlo calculations are performed by using either heavy-ion primary particles or proton beams with intensities scaled by the mass number of the corresponding heavy-ion beam.

  17. An analysis of the shielding gas flow from a coaxial conical nozzle during high power CO2 laser welding

    Ancona, Antonio; Sibillano, Teresa; Lugara, Pietro Mario; Gonnella, Giuseppe; Pascazio, Giuseppe; Maffione, Donato

    2006-01-01

    An experimental and theoretical study on the role of the nitrogen gas stream, exiting from a conventional conical nozzle tip during a laser welding process, has been carried out. A mathematical model has been used, based on the Navier-Stokes equations which express fundamental conservation laws of mass, momentum and energy for a compressible fluid. Numerical simulations of the gas stream colliding onto a plane surface have been performed showing the effects of variations of inlet gas pressure, nozzle exit diameter and standoff distance on the density and Mach number contours, axis pressure of the gas jet and plate pressure produced on the workpiece surface. Laser welding experiments have been performed on carbon and stainless steel specimens, by varying the process parameters in the same range as in the simulations and keeping constant the incident power and the travel speed. Two different gas stream regimes were found, namely sonic and subsonic, which were experimentally verified to produce cutting and welding conditions, respectively. Weld performances have been evaluated in terms of bead width, penetration depth and melted area. Nozzle standoff distance was found to have a negligible influence, while the exit diameter and the flow rate significantly affect the weld results. The numerical predictions allowed an explanation of the experimental results yielding useful suggestions for enhancing the weld quality, acting simply on the shielding gas parameters

  18. Structural Intervention With School Nurses Increases Receipt of Sexual Health Care Among Male High School Students.

    Dittus, Patricia J; Harper, Christopher R; Becasen, Jeffrey S; Donatello, Robin A; Ethier, Kathleen A

    2018-01-01

    Adolescent males are less likely to receive health care and have lower levels of sexual and reproductive health (SRH) knowledge than adolescent females. The purpose of this study was to determine if a school-based structural intervention focused on school nurses increases receipt of condoms and SRH information among male students. Interventions to improve student access to sexual and reproductive health care were implemented in six urban high schools with a matched set of comparison schools. Interventions included working with school nurses to improve access to sexual and reproductive health care, including the provision of condoms and information about pregnancy and sexually transmitted disease prevention and services. Intervention effects were assessed through five cross-sectional yearly surveys, and analyses include data from 13,740 male students. Nurses in intervention schools changed their interactions with male students who visited them for services, such that, among those who reported they went to the school nurse for any reason in the previous year, those in intervention schools reported significant increases in receipt of sexual health services over the course of the study compared with students in comparison schools. Further, these results translated into population-level effects. Among all male students surveyed, those in intervention schools were more likely than those in comparison schools to report increases in receipt of sexual health services from school nurses. With a minimal investment of resources, school nurses can become important sources of SRH information and condoms for male high school students. Published by Elsevier Inc.

  19. Bullying victimization and student engagement in elementary, middle, and high schools: Moderating role of school climate.

    Yang, Chunyan; Sharkey, Jill D; Reed, Lauren A; Chen, Chun; Dowdy, Erin

    2018-03-01

    Bullying is the most common form of school violence and is associated with a range of negative outcomes, including traumatic responses. This study used hierarchical linear modeling to examine the multilevel moderating effects of school climate and school level (i.e., elementary, middle, and high schools) on the association between bullying victimization and student engagement. Participants included 25,896 students in 4th to 12th grades from 114 schools. Results indicated that, after controlling for student and school demographic factors, positive school climate was associated with higher behavioral/cognitive and emotional engagement of students across all grades. This highlights the critical and fundamental role of positive school climate in bullying prevention and intervention, among students across all grade levels, including those with frequent bullying victimization experience. Results also showed that negative associations between student-level bullying victimization and engagement were intensified in more positive school climates. This finding suggests that, in comparison with students in schools with less positive school climates, the engagement of bullying victims in schools with a more positive school climate might be more negatively influenced by their victimization experience. Additionally, the relation between student-level bullying victimization and emotional engagement was significantly different across middle and high schools. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. Shielded Canister Transporter

    Eidem, G.G. Jr.; Fages, R.

    1993-01-01

    The Hanford Waste Vitrification Plant (HWVP) will produce canisters filled with high-level radioactive waste immobilized in borosilicate glass. This report discusses a Shielded Canister Transporter (SCT) which will provide the means for safe transportation and handling of the canisters from the Vitrification Building to the Canister Storage Building (CSB). The stainless steel canisters are 0.61 meters in diameter, 3.0 meters tall, and weigh approximately 2,135 kilograms, with a maximum exterior surface dose rate of 90,000 R/hr. The canisters are placed into storage tubes to a maximum of three tall (two for overpack canisters) with an impact limiter placed at the tube bottom and between each canister. A floor plug seals the top of the storage tube at the operating floor level of the CSB

  1. INTOR radiation shielding for personnel access

    Gohar, Y.; Abdou, M.

    1981-01-01

    The INTOR reactor shield system consists of the blanket, bulk shield, penetration shield, component shield, and biological shield. The bulk shield consists of two parts: (a) the inboard shield; and (b) the outboard shield. The distinction between the different components of the shield system is essential to satisfy the different design constraints and achieve various objectives

  2. A perturbation technique for shield weight minimization

    Watkins, E.F.; Greenspan, E.

    1993-01-01

    The radiation shield optimization code SWAN (Ref. 1) was originally developed for minimizing the thickness of a shield that will meet a given dose (or another) constraint or for extremizing a performance parameter of interest (e.g., maximizing energy multiplication or minimizing dose) while maintaining the shield volume constraint. The SWAN optimization process proved to be highly effective (e.g., see Refs. 2, 3, and 4). The purpose of this work is to investigate the applicability of the SWAN methodology to problems in which the weight rather than the volume is the relevant shield characteristic. Such problems are encountered in shield design for space nuclear power systems. The investigation is carried out using SWAN with the coupled neutron-photon cross-section library FLUNG (Ref. 5)

  3. Technology development for radiation shielding analysis

    Ha, Jung Woo; Lee, Jae Kee; Kim, Jong Kyung

    1986-12-01

    Radiation shielding analysis in nuclear engineering fields is an important technology which is needed for the calculation of reactor shielding as well as radiation related safety problems in nuclear facilities. Moreover, the design technology required in high level radioactive waste management and disposal facilities is faced on serious problems with rapidly glowing nuclear industry development, and more advanced technology has to be developed for tomorrow. The main purpose of this study is therefore to build up the self supporting ability of technology development for the radiation shielding analysis in order to achieve successive development of nuclear industry. It is concluded that basic shielding calculations are possible to handle and analyze by using our current technology, but more advanced technology is still needed and has to be learned for the degree of accuracy in two-dimensional shielding calculation. (Author)

  4. Repository Waste Package Transporter Shielding Weight Optimization

    C.E. Sanders; Shiaw-Der Su

    2005-01-01

    The Yucca Mountain repository requires the use of a waste package (WP) transporter to transport a WP from a process facility on the surface to the subsurface for underground emplacement. The transporter is a part of the waste emplacement transport systems, which includes a primary locomotive at the front end and a secondary locomotive at the rear end. The overall system with a WP on board weights over 350 metric tons (MT). With the shielding mass constituting approximately one-third of the total system weight, shielding optimization for minimal weight will benefit the overall transport system with reduced axle requirements and improved maneuverability. With a high contact dose rate on the WP external surface and minimal personnel shielding afforded by the WP, the transporter provides radiation shielding to workers during waste emplacement and retrieval operations. This paper presents the design approach and optimization method used in achieving a shielding configuration with minimal weight

  5. A Study of School Size among Alabama’s Public High Schools

    Ronald A. Lindahl

    2012-01-01

    Full Text Available The purpose of this study was to examine the relationship between the size of Alabama’s public high schools, selected school quality and financial indicators, and their students’ performance on standardized exams. When the socioeconomic level of the student bodies is held constant, the size of high schools in Alabama has relatively little relationship with 11th grade student (both regular and special education performance on the reading and math portions of the Alabama High School Graduation Exam (AHSGE. High schools’ average daily attendance rates and pupil-to-computer (and computer with Internet connections ratios do not vary in accordance with school size. Higher percentages of highly qualified teachers are found in Alabama’s largest high schools. There was very little difference in the percentage of teachers with a master’s degree or above across school size categories. Very little difference exists across size categories in regard to mean expenditures per pupil (range = $7,322 to $7,829. However, districts of the large high schools exert over twice the effort of those with small high schools (3.2 mills to 1.5 mills and approximately 50 percent greater local effort than the districts of the medium-size high schools.

  6. Nuclear science experiments in high schools

    Lowenthal, G.C.

    1990-01-01

    This paper comments on the importance of nuclear science experiments and demonstrations to science education in secondary schools. It claims that radiation protection is incompletly realised unless supported by some knowledge about ionizing radiations. The negative influence of the NHMRC Code of Practice on school experiments involving ionizing radiation is also outlined. The authors offer some suggestions for a new edition of the Code with a positive approach to nuclear science experiments in schools. 7 refs., 4 figs

  7. Affect of school related factors in the student's choices of the high school

    Gönül Cengiz; Osman Titrek; Özcan Erkan Akgün

    2007-01-01

    It is studied that to determine the school related factors which affects the students’ choices of the high school, according to the type of the schools. This is a survey study. The participants are 523  9 th grade students in 21 secondary schools in Adapazarı. SPSS is used for analyzing data. Kay-Kare Test is used to determine the demografic differences due to the type of the school. To analyze the data for the school related factors, Kruskal Wallis is used. As a result, it is expr...

  8. A photovoice study of school belongingness among high school students in Norway.

    Lieblein, Vaiva Sunniva Deraas; Warne, Maria; Huot, Suzanne; Laliberte Rudman, Debbie; Raanaas, Ruth Kjærsti

    2018-12-01

    Although high school graduation is important for living conditions and health throughout life, many students do not complete. In Norway's northern most county, Finnmark, up to 45% of students do not complete high school. Contrary to prior research that has primarily focused on causes for dropout, this study's aim was to deepen understanding of factors that support high school attendance. A strengths-based participatory approach using photovoice addressed attendance factors as perceived by seven participating students from one high school in Finnmark. Qualitative content analysis of data generated through group dialogue about participant-generated photos and individual interviews identified six factors important for students' school attendance: a supportive school environment, a good learning environment, recuperation and recreation, family and friends, goals and ambitions, and place attachment. Related aspects of a supportive environment and belongingness, where school staff made important contributions to promoting a positive environment, were essential.

  9. The Kennedy Report: Commission Evaluates High School Journalism

    Heintz, Ann

    1974-01-01

    Presents excerpts from the report of the Kennedy Commission of Inquiry into High School Journalism, concentrating on censorship, minority participation, journalism education, established media, and censorship issues.

  10. The School Counselor Leading (Social) Entrepreneurship within High Schools

    Cuervo, Gemma; Alvarez, Isabel

    2016-01-01

    This article aims to determine the role that should exercise a School Counselor in social entrepreneurship education programs. To achieve this objective, first, we have analyzed the main approaches of these programs that are being carried out currently in Europe, which has allowed getting a concrete and contextualized idea about the status of the…

  11. Extreme Consumption Drinking Gaming and Prepartying among High School Students

    Tomaso, Cara C.; Zamboanga, Byron L.; Haas, Amie L.; Kenney, Shannon R.; Ham, Lindsay S.; Borsari, Brian

    2016-01-01

    Drinking games and prepartying (i.e., drinking before going to a social gathering/event) have emerged as high-risk drinking behaviors in high school students. The present study examines the current prepartying behaviors of high school students who report current participation in extreme-consumption games (e.g., chugging) with those who do not.…

  12. A Pilot Study of a Kindergarten Summer School Reading Program in High-Poverty Urban Schools

    Denton, Carolyn A.; Solari, Emily J.; Ciancio, Dennis J.; Hecht, Steven A.; Swank, Paul R.

    2010-01-01

    This pilot study examined an implementation of a kindergarten summer school reading program in 4 high-poverty urban schools. The program targeted both basic reading skills and oral language development. Students were randomly assigned to a treatment group (n = 25) or a typical practice comparison group (n = 28) within each school; however,…

  13. Excellence in Urban High Schools: An Emerging District/School Perspective.

    Yin, Robert K.; And Others

    This report presents the preliminary findings of the District/Secondary School Study. The study had two purposes: (1) to identify ways of managing urban high schools to produce excellence, and (2) to recommend policy-relevant guidance to existing school and district administrators. The study design focused on the testing of two specific theories…

  14. Leadership to Build a Democratic Community within School: A Case Study of Two Korean High Schools

    Kang, Young Taek; Printy, Susan

    2009-01-01

    This article aims to explore how democratic community is manifest in schools in Korea. It also tries to examine how leadership, specifically transformational leadership, functions in shaping a democratic community within a school. Toward this aim, we have conducted a case study of two religious high schools in Korea. Based on the findings from the…

  15. Assessment of Secondhand Smoke Exposure at School among U.S. Middle and High School Students

    Olufajo, Olubode Ademola; Agaku, Israel Terungwa

    2015-01-01

    To obtain nationally representative estimates of the prevalence of secondhand smoke (SHS) exposure at U.S. schools, we assessed the prevalence and correlates of SHS exposure at school among U.S. middle and high school students using data from the 2011 National Youth Tobacco Survey comprising of 18,866 students spread across all the U.S. states.…

  16. The Effects of Home-School Dissonance on African American Male High School Students

    Brown-Wright, Lynda; Tyler, Kenneth Maurice

    2010-01-01

    The current study examined associations between home-school dissonance and several academic and psychological variables among 80 African American male high school students. Regression analyses revealed that home-school dissonance significantly predicted multiple academic and psychological variables, including amotivation, academic cheating,…

  17. Guiding High School Students through Applied Internship Projects in College Environments: A Met School Story

    Hassan, Said

    2012-01-01

    Many high school students are faced with the dilemma of "what next?" as they go through their final years at school. With new-economy jobs becoming more complex and career paths increasingly convoluted, the decision-making process is no simple task. What do these jobs and careers entail? How does what they are studying in school relate…

  18. Reducing School Factors That Lead to Student Dropout at Sussex Central High School

    Jerns, Pamela Renee

    2012-01-01

    The focus of this Executive Position Paper (EPP) is to address the dropout rate at Sussex Central High School (SCHS) in the Indian River School District (IRSD). Studies conducted for this EPP align with current research--student dropout is a result of culminating school-based factors that include poor attendance and lack of exposure to rigorous…

  19. The Nature, Causes and Effects of School Violence in South African High Schools

    Ncontsa, Vusumzi Nelson; Shumba, Almon

    2013-01-01

    We sought to investigate the nature, causes and effects of school violence in four South African high schools. A purposive sample of five principals, 80 learners and 20 educators was selected from the four schools used in the study. A sequential mixed method approach was used in this study; both questionnaires and interviews were used. The design…

  20. High School Dropouts: Interactions between Social Context, Self-Perceptions, School Engagement, and Student Dropout

    Fall, Anna-Maria; Roberts, Greg

    2012-01-01

    Research suggests that contextual, self-system, and school engagement variables influence dropping out from school. However, it is not clear how different types of contextual and self-system variables interact to affect students' engagement or contribute to decisions to dropout from high school. The self-system model of motivational development…

  1. Impact of Texas high school science teacher credentials on student performance in high school science

    George, Anna Ray Bayless

    A study was conducted to determine the relationship between the credentials held by science teachers who taught at a school that administered the Science Texas Assessment on Knowledge and Skills (Science TAKS), the state standardized exam in science, at grade 11 and student performance on a state standardized exam in science administered in grade 11. Years of teaching experience, teacher certification type(s), highest degree level held, teacher and school demographic information, and the percentage of students who met the passing standard on the Science TAKS were obtained through a public records request to the Texas Education Agency (TEA) and the State Board for Educator Certification (SBEC). Analysis was performed through the use of canonical correlation analysis and multiple linear regression analysis. The results of the multiple linear regression analysis indicate that a larger percentage of students met the passing standard on the Science TAKS state attended schools in which a large portion of the high school science teachers held post baccalaureate degrees, elementary and physical science certifications, and had 11-20 years of teaching experience.

  2. Shielded regenerative neutron detector

    Terhune, J.H.; Neissel, J.P.

    1978-01-01

    An ion chamber type neutron detector is disclosed which has a greatly extended lifespan. The detector includes a fission chamber containing a mixture of active and breeding material and a neutron shielding material. The breeding and shielding materials are selected to have similar or substantially matching neutron capture cross-sections so that their individual effects on increased detector life are mutually enhanced

  3. Development of neutron shielding material for cask

    Najima, K.; Ohta, H.; Ishihara, N.; Matsuoka, T.; Kuri, S.; Ohsono, K.; Hode, S.

    2001-01-01

    Since 1980's Mitsubishi Heavy Industries, Ltd (MHI) has established transport and storage cask design 'MSF series' which makes higher payload and reliability for long term storage. MSF series transport and storage cask uses new-developed neutron shielding material. This neutron shielding material has been developed for improving durability under high condition for long term. Since epoxy resin contains a lot of hydrogen and is comparatively resistant to heat, many casks employ epoxy base neutron shielding material. However, if the epoxy base neutron shielding material is used under high temperature condition for a long time, the material deteriorates and the moisture contained in it is released. The loss of moisture is in the range of several percents under more than 150 C. For this reason, our purpose was to develop a high durability epoxy base neutron shielding material which has the same self-fire-extinction property, high hydrogen content and so on as conventional. According to the long-time heating test, the weight loss of this new neutron shielding material after 5000 hours heating has been lower than 0.04% at 150 C and 0.35% at 170 C. A thermal test was also performed: a specimen of neutron shielding material covered with stainless steel was inserted in a furnace under condition of 800 C temperature for 30 minutes then was left to cool down in ambient conditions. The external view of the test piece shows that only a thin layer was carbonized

  4. Facile and Low-Temperature Fabrication of Thermochromic Cr2O3/VO2 Smart Coatings: Enhanced Solar Modulation Ability, High Luminous Transmittance and UV-Shielding Function.

    Chang, Tianci; Cao, Xun; Li, Ning; Long, Shiwei; Gao, Xiang; Dedon, Liv R; Sun, Guangyao; Luo, Hongjie; Jin, Ping

    2017-08-09

    In the pursuit of energy efficient materials, vanadium dioxide (VO 2 ) based smart coatings have gained much attention in recent years. For smart window applications, VO 2 thin films should be fabricated at low temperature to reduce the cost in commercial fabrication and solve compatibility problems. Meanwhile, thermochromic performance with high luminous transmittance and solar modulation ability, as well as effective UV shielding function has become the most important developing strategy for ideal smart windows. In this work, facile Cr 2 O 3 /VO 2 bilayer coatings on quartz glasses were designed and fabricated by magnetron sputtering at low temperatures ranging from 250 to 350 °C as compared with typical high growth temperatures (>450 °C). The bottom Cr 2 O 3 layer not only provides a structural template for the growth of VO 2 (R), but also serves as an antireflection layer for improving the luminous transmittance. It was found that the deposition of Cr 2 O 3 layer resulted in a dramatic enhancement of the solar modulation ability (56.4%) and improvement of luminous transmittance (26.4%) when compared to single-layer VO 2 coating. According to optical measurements, the Cr 2 O 3 /VO 2 bilayer structure exhibits excellent optical performances with an enhanced solar modulation ability (ΔT sol = 12.2%) and a high luminous transmittance (T lum,lt = 46.0%), which makes a good balance between ΔT sol and T lum for smart windows applications. As for UV-shielding properties, more than 95.8% UV radiation (250-400 nm) can be blocked out by the Cr 2 O 3 /VO 2 structure. In addition, the visualized energy-efficient effect was modeled by heating a beaker of water using infrared imaging method with/without a Cr 2 O 3 /VO 2 coating glass.

  5. Neutron shielding material based on colemanite and epoxy resin

    Okuno, K.

    2005-01-01

    In recent years, there has been a need for compact shielding design such as self-shielding of a PET cyclotron or up-gradation of radiation machinery in existing facilities. In these cases, high performance shielding materials are needed. Concrete or polyethylene have been used for a neutron shield. However, for compact shielding, they fall short in terms of performance or durability. Therefore, a new type of neutron shielding material based on epoxy resin and colemanite has been developed. Slab attenuation experiments up to 40 cm for the new shielding material were carried out using a 252 Cf neutron source. Measurement was carried out using a REM-counter, and compared with calculation. The results show that the shielding performance is better than concrete and polyethylene mixed with 10 wt% boron oxide. From the result, we confirmed that the performance of the new material is suitable for practical use. (authors)

  6. Cigar Product Modification Among High School Youth.

    Trapl, Erika S; Koopman Gonzalez, Sarah J; Cofie, Leslie; Yoder, Laura D; Frank, Jean; Sterling, Kymberle L

    2018-02-07

    Prevalence of cigar use has been increasing among youth. Research indicates that youth are modifying cigar products either by "freaking" (ie, removing the filter paper) or "blunting" (removing the tobacco and supplementing or replacing with marijuana), yet little is known about youth who engage in this behavior. Thus, this study examines demographic and concurrent substance use behaviors of youth who modify cigars. Data from the 2013 Cuyahoga County Youth Risk Behavior survey were examined (n = 16 855). The survey collected data on demographics, cigar product use, cigar modification behaviors, and current cigarette, hookah and marijuana use. Responses to cigar product use items were used to create a composite to classify youth in one of eight unique user categories. Univariate and bivariate statistics were calculated using SPSS complex samples procedures. Overall, 15.2% reported current cigar product use, 11.0% reported current freaking, and 18.5% reported current blunt use; taken together, 25.3% of respondents reported any current use of a cigar product. When examined by user category, of those who endorsed any cigar product use, cigars, cigarillos, and little cigars use only was most endorsed (26.3%), followed by Blunt only (25.2%) and all three (ie, cigars, cigarillos, and little cigars, freaking, and blunting; 17.4%). A substantial proportion of high school youth who report using cigar products are modifying them in some way, with nearly half freaking and nearly two-thirds blunting. Given the FDA Center for Tobacco products recent extension of its regulatory authority to include cigar products, it is imperative to understand more about the prevalence of and reasons for cigar modification behaviors. Although the FDA has recently enacted regulatory authority over cigar products, little is known about cigar product modification. This is the first study to concurrently examine two unique cigar modification behaviors, "freaking" (ie, removing the filter paper) and

  7. Radiation shielding plate

    Kobayashi, Torakichi; Sugawara, Takeo.

    1983-01-01

    Purpose: To reduce the weight and stabilize the configuration of a radiation shielding plate which is used in close contact with an object to be irradiated with radiation rays. Constitution: The radiation shielding plate comprises a substrate made of lead glass and a metallic lead coating on the surface of the substrate by means of plating, vapor deposition or the like. Apertures for permeating radiation rays are formed to the radiation shielding plate. Since the shielding plate is based on a lead glass plate, a sufficient mechanical strength can be obtained with a thinner structure as compared with the conventional plate made of metallic lead. Accordingly, if the shielding plate is disposed on a soft object to be irradiated with radiation rays, the object and the plate itself less deform to obtain a radiation irradiation pattern with distinct edges. (Moriyama, K.)

  8. Sexual Harassment, Bullying, and School Outcomes for High School Girls and Boys.

    Gruber, James; Fineran, Susan

    2016-01-01

    A comparison of the impact of bullying and sexual harassment on five school outcomes was conducted on a sample of high school students. Results revealed that sexual harassment was a stronger predictor than bullying of all school outcomes for both sexes, but especially for girls. This study suggests that sexual harassment, which activates sexist and heterosexist stereotypes, erodes school engagement, alienates students from teachers, and adversely affects academic achievement, to a greater degree than bullying does. © The Author(s) 2015.

  9. Identifying and Understanding Effective High School Practices

    Rutledge, Stacey A.; Cannata, Marisa

    2016-01-01

    The authors report on a yearlong investigation into similar schools that performed well and less well in the same district. They found that the higher-performing schools engaged in an intentional set of systemic practices that encourage Personalization for Academic and Social Learning (PASL) in one district and integrated structures of academic…

  10. Student engagement and its relationship with early high school dropout.

    Archambault, Isabelle; Janosz, Michel; Fallu, Jean-Sébastien; Pagani, Linda S

    2009-06-01

    Although the concept of school engagement figures prominently in most school dropout theories, there has been little empirical research conducted on its nature and course and, more importantly, the association with dropout. Information on the natural development of school engagement would greatly benefit those interested in preventing student alienation during adolescence. Using a longitudinal sample of 11,827 French-Canadian high school students, we tested behavioral, affective, cognitive indices of engagement both separately and as a global construct. We then assessed their contribution as prospective predictors of school dropout using factor analysis and structural equation modeling. Global engagement reliably predicted school dropout. Among its three specific dimensions, only behavioral engagement made a significant contribution in the prediction equation. Our findings confirm the robustness of the overall multidimensional construct of school engagement, which reflects both cognitive and psychosocial characteristics, and underscore the importance attributed to basic participation and compliance issues in reliably estimating risk of not completing basic schooling during adolescence.

  11. EARTHTIME: Teaching geochronology to high school students

    Bookhagen, Britta; Buchwaldt, Robert; McLean, Noah; Rioux, Matthew; Bowring, Samuel

    2010-05-01

    The authors taught an educational module developed as part of the EARTHTIME (www.earth-time.org) outreach initiative to 215 high school students from a Massachusetts (USA) High School as part of an "out-of-school" field trip. The workshop focuses on uranium-lead (U-Pb) dating of zircons and its application to solving a geological problem. The theme of our 2.5-hour module is the timing of the K-T boundary and a discussion of how geochronology can be used to evaluate the two main hypotheses for the cause of the concurrent extinction—the Chicxlub impact and the massive eruption of the Deccan Traps. Activities are divided into three parts: In the first part, the instructors lead hands-on activities demonstrating how rock samples are processed to isolate minerals by their physical properties. Students use different techniques, such as magnetic separation, density separation using non-toxic heavy liquids, and mineral identification with a microscope. We cover all the steps from sampling an outcrop to determining a final age. Students also discuss geologic features relevant to the K-T boundary problem and get the chance to examine basalts, impact melts and meteorites. In the second part, we use a curriculum developed for and available on the EARTHTIME website (http://www.earth-time.org/Lesson_Plan.pdf). The curriculum teaches the science behind uranium-lead dating using tables, graphs, and a geochronology kit. In this module, the students start by exploring the concepts of half-life and exponential decay and graphically solving the isotopic decay equation. Manipulating groups of double-sided chips labeled with U and Pb isotopes reinforces the concept that an age determination depends on the Pb/U ratio, not the absolute number of atoms present. Next, the technique's accuracy despite loss of parent and daughter atoms during analysis, as well as the use of isotopic ratios rather than absolute abundances, is explained with an activity on isotope dilution. Here the students

  12. Cardiopulmonary resuscitation training in Washington state public high schools.

    Reder, Sheri; Quan, Linda

    2003-03-01

    To determine the best approaches for increasing cardiopulmonary resuscitation (CPR) training opportunities for public high school students, we conducted a statewide survey of all 310 public high schools in Washington State. The findings describe CPR student training currently provided by high schools, barriers to providing, and strategies to increase CPR training of high school students. The response rate was 89% (276 schools) from a combination of mail and telephone surveys; 35% (n=97) reported that they did not provide any CPR student training. Of the 132 schools that provided CPR student training, 23% trained less than 10% of their students, and 39% trained more than 90% of their students. The majority of public high schools, 70%, did not have any teacher trained to teach CPR or had only one teacher with such training. Yet 80% of schools felt that CPR training is best provided in school settings. Schools perceived the greatest benefit of CPR training as providing students with the skill to save a life (43%). The most frequently identified barriers were logistical: limited time to teach the curriculum (24%), lack of funds (16%), and instructor scheduling difficulties (17%). Less than 5% of respondents voiced any opposition to CPR training, and that opposition was for logistical reasons. To increase CPR training, the single best strategies suggested were: increase funding, provide time in the curriculum, have more certified instructors, and make CPR student training a requirement.

  13. High School Students' Recommendations to Improve School Food Environments: Insights From a Critical Stakeholder Group.

    Asada, Yuka; Hughes, Alejandro G; Read, Margaret; Schwartz, Marlene B; Chriqui, Jamie F

    2017-11-01

    The Healthy, Hunger-Free Kids Act of 2010 (HHFKA) directed the US Department of Agriculture (USDA) to revise school meal standards. Students are most affected by efforts to improve the school food environment; yet, few studies directly include students. This study examined high school students' experiences of school meal reform to gain insight into implementation recommendations. We conducted 5 focus groups with high school students (N = 15) from high schools across 9 states. We also conducted follow-up interviews to further explore personal experiences. Focus groups and interview transcripts were coded and organized in Atlas.ti v7 by analysts, following principles of constant comparative analysis. Students reported overall positive perceptions of the revised school meal standards and supported continued efforts to improve the food environment. Recommendations to improve the food environment included engaging students, focusing on the quality and palatability of meal items, moving toward scratch-cooking, and addressing cafeteria infrastructure. Students' recommendations point to opportunities where school districts, as well as local, state, and federal organizations can work to improve the school food environment. Their insights are directly relevant to USDA's recently released Local School Wellness Policy final rule, of which school meal standards are one provision. © 2017, American School Health Association.

  14. School and community predictors of smoking: a longitudinal study of Canadian high schools.

    Lovato, Chris; Watts, Allison; Brown, K Stephen; Lee, Derrick; Sabiston, Catherine; Nykiforuk, Candace; Eyles, John; Manske, Steve; Campbell, H Sharon; Thompson, Mary

    2013-02-01

    We identified the most effective mix of school-based policies, programs, and regional environments associated with low school smoking rates in a cohort of Canadian high schools over time. We collected a comprehensive set of student, school, and community data from a national cohort of 51 high schools in 2004 and 2007. Hierarchical linear modeling was used to predict school and community characteristics associated with school smoking prevalence. Between 2004 and 2007, smoking prevalence decreased from 13.3% to 10.7% in cohort schools. Predictors of lower school smoking prevalence included both school characteristics related to prevention programming and community characteristics, including higher cigarette prices, a greater proportion of immigrants, higher education levels, and lower median household income. Effective approaches to reduce adolescent smoking will require interventions that focus on multiple factors. In particular, prevention programming and high pricing for cigarettes sold near schools may contribute to lower school smoking rates, and these factors are amenable to change. A sustained focus on smoking prevention is needed to maintain low levels of adolescent smoking.

  15. Violence Prevention after Columbine: A Survey of High School Mental Health Professionals

    Crepeau-Hobson, M. Franci; Filaccio, Marylynne; Gottfried, Linda

    2005-01-01

    The authors examined changes in mental health services and violence prevention strategies in public high schools since the shootings at Columbine High School. Surveys were mailed to school mental health professionals at public high schools in Colorado. Respondents included school counselors, school psychologists, school social workers, principals,…

  16. Principals' Perceptions of Professional Development in High- and Low-Performing High-Poverty Schools

    Moore, Sheila; Kochan, Frances

    2013-01-01

    This is the second part of a two-part study examining issues related to professional development in high-poverty schools. The findings from the initial study indicated that principals in high-poverty, high-performing schools perceived higher levels of implementation of quality professional development standards in their schools than did principals…

  17. Educational Management Organizations as High Reliability Organizations: A Study of Victory's Philadelphia High School Reform Work

    Thomas, David E.

    2013-01-01

    This executive position paper proposes recommendations for designing reform models between public and private sectors dedicated to improving school reform work in low performing urban high schools. It reviews scholarly research about for-profit educational management organizations, high reliability organizations, American high school reform, and…

  18. The Global Systems Science High School Curriculum

    Gould, A. D.; Sneider, C.; Farmer, E.; Erickson, J.

    2015-12-01

    Global Systems Science (GSS), a high school integrated interdisciplinary science project based at Lawrence Hall of Science at UC Berkeley, began in the early 1990s as a single book "Planet at Risk" which was only about climate change. Federal grants enabled the project to enlist about 150 teachers to field test materials in their classes and then meeting in summer institutes to share results and effect changes. The result was a series of smaller modules dealing not only with climate change, but other related topics including energy flow, energy use, ozone, loss of biodiversity, and ecosystem change. Other relevant societal issues have also been incorporated including economics, psychology and sociology. The course has many investigations/activities for student to pursue, interviews with scientists working in specific areas of research, and historical contexts. The interconnectedness of a myriad of small and large systems became an overarching theme of the resulting course materials which are now available to teachers for free online at http://www.globalsystemsscience.org/

  19. THE CAUSES OF ABSENTEEISM OF HIGH SCHOOL STUDENTS

    Gürbüz Ocak; İjlal Ocak; Emine A. Baysal

    2017-01-01

    The purpose of this study is to find out the causes of high school students’ absenteeism. Survey method was used. The population was comprised of 531 students in the public high schools. The data was collected with "The Scale of Absenteeism Causes" developed by the researchers. Cronbach Alpha was calculated as α=0.936. Findings show the causes of students' absenteeism aren't related to school, students themselves and their parent, however, student absenteeism causes partly psychological reaso...

  20. High-Performance Schools: Affordable Green Design for K-12 Schools; Preprint

    Plympton, P.; Brown, J.; Stevens, K.

    2004-08-01

    Schools in the United States spend $7.8 billion on energy each year-more than the cost of computers and textbooks combined, according to a 2003 report from the National Center for Education Statistics. The U.S. Department of Energy (DOE) estimates that these high utility bills could be reduced as much as 25% if schools adopt readily available high performance design principles and technologies. Accordingly, hundreds of K-12 schools across the country have made a commitment to improve the learning and teaching environment of schools while saving money and energy and protecting the environment. DOE and its public- and private-sector partners have developed Energy Design Guidelines for High Performance Schools, customized for nine climate zones in U.S. states and territories. These design guidelines provide information for school decision makers and design professionals on the advantages of energy efficiency and renewable energy designs and technologies. With such features as natural day lighting, efficient electric lights, water conservation, and renewable energy, schools in all types of climates are proving that school buildings, and the students and teachers who occupy them, are indeed high performers. This paper describes high performance schools from each of the nine climate zones associated with the Energy Design Guidelines. The nine case studies focus on the high performance design strategies implemented in each school, as well as the cost savings and benefits realized by students, faculty, the community, and the environment.

  1. Engaging High School Youth in Paleobiology Research

    Saltzman, J.; Heim, N. A.; Payne, J.

    2013-12-01

    The chasm between classroom science and scientific research is bridged by the History of Life Internships at Stanford University. Nineteen interns recorded more than 25,500 linear body size measurements of fossil echinoderms and ostracods spanning more than 11,000 species. The interns were selected from a large pool of applicants, and well-established relationships with local teachers at schools serving underrepresented groups in STEM fields were leveraged to ensure a diverse mix of applicants. The lead investigator has been hosting interns in his research group for seven years, in the process measuring over 36,000 foraminfera species as well as representatives from many other fossil groups. We (faculty member, researcher, and educators) all find this very valuable to engage youth in novel research projects. We are able to create an environment where high school students can make genuine contributions to jmportant and unsolved scientific problems, not only through data collection but also through original data analysis. Science often involves long intervals of data collection, which can be tedious, and big questions often require big datasets. Body size evolution is ideally suited to this type of program, as the data collection process requires substantial person-power but not deep technical expertise or expensive equipment. Students are therefore able to engage in the full scientific process, posing previously unanswered questions regarding the evolution of animal size, compiling relevant data, and then analyzing the data in order to test their hypotheses. Some of the projects students developed were truly creative and fun to see come together. Communicating is a critical step in science yet is often lost in the science classroom. The interns submitted seven abstracts to this meeting for the youth session entitled Bright STaRS based on their research projects. To round out the experience, students also learn about the broad field of earth sciences through

  2. Eye Injuries in High School and Collegiate Athletes.

    Boden, Barry P; Pierpoint, Lauren A; Boden, Rebecca G; Comstock, R Dawn; Kerr, Zachary Y

    Although eye injuries constitute a small percentage of high school and college sports injuries, they have the potential to be permanently debilitating. Eye injury rates will vary by sport, sex, and between the high school and college age groups. Descriptive epidemiology study. Level 3. Data from eye injury reports in high school and college athletes were obtained from the National High School Sports-Related Injury Surveillance System, High School Reporting Information Online (HS RIO) database over a 10-year span (2005-2006 through 2014-2015 school years) and the National Collegiate Athletic Association (NCAA) Injury Surveillance Program (ISP) over an 11-year span (2004-2005 through 2014-2015 school years). Injury rates per 100,000 athlete-exposures (AEs), injury rate ratios (RRs), and 95% CIs were calculated. Distributions of eye injuries by diagnosis, mechanism, time loss, and surgery needs were also examined. A total of 237 and 273 eye injuries were reported in the HS RIO and the NCAA ISP databases, respectively. The sports with the highest eye injury rates (per 100,000 AEs) for combined high school and college athletes were women's basketball (2.36), women's field hockey (2.35), men's basketball (2.31), and men's wrestling (2.07). Overall eye injury rates at the high school and college levels were 0.68 and 1.84 per 100,000 AEs, respectively. Eye injury rates were higher in competition than practice in high school (RR, 3.47; 95% CI, 2.69-4.48) and college (RR, 3.13; 95% CI, 2.45-3.99). Most injuries were contusions (high school, 35.9%; college, 33.3%) and due to contact (high school, 89.9%; college, 86.4%). Only a small percentage of injuries resulted in time loss over 21 days (high school, 4.2%; college, 3.0%). Eye injury rates and patterns vary by sport, sex, and between the high school and college age groups. Although severe injuries do occur, most eye injuries sustained by high school and college athletes are minor, with limited time loss and full recovery

  3. Superconducting magnetic shields for neutral beam injectors. Final report

    1985-04-01

    Large high energy deuterium neutral beams which must be made from negative ions require extensive magnetic shielding against the intense fringe fields surrounding a magnetic fusion power plant. The feasibility of shielding by multilayer sheets of copper-superconducting laminated material was investigated. It was found that, if necessary fabrication techniques are developed, intrinsically stable type II superconductors will be able to shield against the magnetic fields of the fusion reactors. Among the immediate benefits of this research is better magnetic shields for neutral beam injectors in support of DOE's fusion program. Another application may be in the space vehicles, where difficulties in transporting heavy μ-metal sections may make a comparatively light superconducting shield attractive. Also, as high-field superconducting magnets find widespread applications, the need for high-intensity magnetic shielding will increase. As a result, the commercial market for the magnetic shields should expand along with the market for superconducting magnets

  4. Approaches to School Leadership in Inclusive STEM High Schools: A Cross-Case Analysis

    Ford, Michael Robert

    Inclusive STEM-focused high schools (ISHSs) are a relatively new phenomenon in the landscape of public education. This study of four exemplar ISHSs (identified by experts in STEM education as highly successfully in preparing students underrepresented in STEM for STEM majors in college and future STEM careers) provides a rich description of the approach to ISHS school leadership by identifying various internal and external leadership factors influencing school leadership. This study examined an existing data set that included site visits to four ISHSs along with pre- and post-visit data, and a cross-case analysis focused on the leadership contributions of ISHS leaders and their larger community. This study found that the ISHSs expanded the concept of school leadership to include leadership both within and outside the school. In addition, school leaders needed autonomy to innovate and respond to their schools' needs. This included autonomy in hiring new teachers, autonomy from school district influence, and autonomy from restrictive teachers' union regulation and policies. Finally, ISHSs needed to continually invest in increasing their schools' capacities. This included investing in teacher professionalization, providing pathways for school leadership, collaborating with business and industry, and identifying the best student supports. A product of this study was a proposition for characterizing school leadership in an ISHS. This proposition may offer valuable insight, implications, and information for states and schools districts that may be planning or improving STEM education programs.

  5. HPGe detector shielding adjustment

    Trnkova, L.; Rulik, P.

    2008-01-01

    Low-level background shielding of HPGe detectors is used mainly for environmental samples with very low content of radionuclides. National Radiation Protection Institute (SURO) in Prague is equipped with 14 HPGe detectors with relative efficiency up to 150%. The detectors are placed in a room built from materials with low content of natural radionuclides and equipped with a double isolation of the floor against radon. Detectors themselves are placed in lead or steel shielding. Steel shielding with one of these detectors with relative efficiency of 100% was chosen to be rebuilt to achieve lower minimum detectable activity (MDA). Additional lead and copper shielding was built up inside the original steel shielding to reduce the volume of the inner space and filled with nitrogen by means of evaporating liquid nitrogen. The additional lead and copper shielding, consequent reduction of the inner volume and supply of evaporated nitrogen, caused a decrease of the background count and accordingly MDA values as well. The effect of nitrogen evaporation on the net areas of peaks belonging to radon daughters is significant. The enhanced shielding adjustment has the biggest influence in low energy range, what can be seen in collected data. MDA values in energy range from 30 keV to 400 keV decreased to 0.65-0.85 of original value, in energy range from 400 keV to 2 MeV they fell to 0.70-0.97 of original value. (authors)

  6. Shielding in experimental areas

    Stevens, A.; Tarnopolsky, G.; Thorndike, A.; White, S.

    1979-01-01

    The amount of shielding necessary to protect experimental detectors from various sources of background radiation is discussed. As illustrated an experiment has line of sight to sources extending approx. 90 m upstream from the intersection point. Packing a significant fraction of this space with shielding blocks would in general be unacceptable because primary access to the ring tunnel is from the experimental halls. (1) From basic machine design considerations and the inherent necessity to protect superconducting magnets it is expected that experimental areas in general will be cleaner than at any existing accelerator. (2) Even so, it will likely be necessary to have some shielding blocks available to protect experimental apparatus, and it may well be necessary to have a large amount of shielding available in the WAH. (3) Scraping will likely have some influence on all halls, and retractable apparatus may sometimes be necessary. (4) If access to any tunnel is needed to replace a magnet, one has 96 h (4 days) available to move shielding away to permit access without additional downtime. This (the amount of shielding one can shuffle about in 96 h) is a reasonable upper limit to shielding necessary in a hall

  7. High schools and labour market outcomes: Italian graduates

    Pozzoli, Dario

    2007-01-01

    To provide empirical evidence on differences across high school tracks in early occupational labour market outcome, I estimate how the employment probability, the time before the first job is taken up, and earnings depend on high school type, controlling for student characteristics by a propensit...

  8. ExpandED Options: Learning beyond High School Walls

    ExpandED Schools, 2014

    2014-01-01

    Through ExpandED Options by TASC, New York City high school students get academic credit for learning career-related skills that lead to paid summer jobs. Too many high school students--including those most likely to drop out--are bored or see classroom learning as irrelevant. ExpandED Options students live the connection between mastering new…

  9. GIS Adoption among Senior High School Geography Teachers in Taiwan

    Lay, Jinn-Guey; Chen, Yu-Wen; Chi, Yu-Lin

    2013-01-01

    This article explores the adoption of geographic information system (GIS) knowledge and skills through in-service training for high school geography teachers in Taiwan. Through statistical analysis of primary data collected from a census of Taiwan's high school geography teachers, it explores what motivates these teachers to undertake GIS…

  10. Standards for the High School Psychology Course. ERIC Digest.

    Morganett, L. Lee

    The latest contribution to the content standards boom that began in the 1990s comes from the American Psychological Association (APA), which recently published "National Standards for the Teaching of High School Psychology." This Digest discusses: (1) the origin and purposes of the project to develop standards for high school psychology…

  11. River City High School Guidance Services: A Conceptual Model.

    American Coll. Testing Program, Iowa City, IA.

    This model describes how the guidance staff at a hypothetical high school communicated the effectiveness of the guidance program to students, parents, teachers, and administrators. A description of the high school is presented, and guidance services and personnel are described. A conceptual model responding to student needs is outlined along with…

  12. Examining Gender Inequality in a High School Engineering Course

    Riegle-Crumb, Catherine; Moore, Chelsea

    2013-01-01

    This paper examines gender inequality within the context of an upper-level high school engineering course recently offered in Texas. Data was collected from six high schools that serve students from a variety of backgrounds. Among the almost two hundred students who enrolled in this challenge-based engineering course, females constituted a clear…

  13. NASA Ames Summer High School Apprenticeship Research Program

    Powell, P.

    1985-01-01

    The Summer High School Apprenticeship Research Program (SHARP) is described. This program is designed to provide engineering experience for gifted female and minority high school students. The students from this work study program which features trips, lectures, written reports, and job experience describe their individual work with their mentors.

  14. Interpretation Awareness of Creativity Mathematics Teacher High School

    Mastuti, Ajeng Gelora; Nusantara, Toto; Purwanto; As'ari, Abdurrahman; Subanji; Abadyo; Susiswo

    2016-01-01

    The purposes of this study are: a) to investigate high school math teacher creativity equality, b) to investigate what factors can inhibit their creativity consciousness. The subjects of this study consisted of two high school math teacher who had a different experience academically. The results of the qualitative research show the relationship…

  15. Fears and Related Anxieties in Chinese High School Students

    Li, Huijun; Prevatt, Frances

    2008-01-01

    Chinese students from different high school settings face unique academic and emotional challenges. They are in a very vulnerable position due to high parent and teacher expectations and pressure to succeed in college entrance examinations and honour the family and the school. They are also vulnerable due to possible inappropriate parenting…

  16. Determination of Healthy Lifestyle Behaviors of High School Students

    Çelebi, Evrim; Gündogdu, Cemal; Kizilkaya, Aysel

    2017-01-01

    Healthy lifestyle behaviors can be defined as all the behaviors believed and applied by individuals to be healthy, maintain health and be protected from diseases. This study aims to determine the healthy lifestyle behaviors of high school students studying at the high schools in the Province of Elazig, Turkey. The study population of this…

  17. Centauri High School Teacher Honored as Colorado Outstanding Biology

    Teacher Centauri High School Teacher Honored as Colorado Outstanding Biology Teacher For more information contact: e:mail: Public Affairs Golden, Colo., May 2, 1997 -- Tracy Swedlund, biology teacher at Centauri High School in LaJara, was selected as Colorado's 1997 Outstanding Biology Teacher and will be

  18. Elective course student sectioning at Danish high schools

    Kristiansen, Simon; Stidsen, Thomas Riis

    2016-01-01

    . This paper presents an Adaptive Large Neighborhood Search heuristic for the ESCC. The algorithm is applied to 80 real-life instances from Danish high schools and compared with solutions found by using the state-of-the-art MIP solver Gurobi. The algorithm has been implemented in the commercial product Lectio......, and is thereby available for approximately 200 high schools in Denmark....

  19. Family Influences on Dropout Behavior in One California High School.

    Rumberger, Russell W.; And Others

    1990-01-01

    Investigated how family processes influence high school student dropout behavior. Used a sample of 114 dropouts from 1 California high school, 48 of whom were matched to similarly profiled continuing students. Identified factors that explain students' dropout decisions: permissive parenting, negative parental reactions to grades, excessive…

  20. Learner Factors in a High-Poverty Urban Middle School

    Olivares-Cuhat, Gabriela

    2011-01-01

    The purpose of this pilot study is to gain more insight into learner factors prominent in high-poverty urban schools and to suggest pedagogical approaches appropriate to this environment. To this end, three surveys were administered to students attending a high-poverty, urban middle school in order to measure their learning style preferences,…