Chlamydia - CDC Fact Sheet

Science.gov (United States)

... Archive STDs Home Page Bacterial Vaginosis (BV) Chlamydia Gonorrhea Genital Herpes Hepatitis HIV/AIDS & STDs Human Papillomavirus ( ... sheet Pelvic Inflammatory Disease (PID) – CDC fact sheet Gonorrhea – CDC fact sheet STDs Home Page Bacterial Vaginosis ( ...

Fuels planning: science synthesis and integration; social issues fact sheet 16: Prescribed fire and visual quality

Science.gov (United States)

Christine Esposito

2006-01-01

Research shows that, while prescribed burning and other fuels treatments can lower visual quality in some situations, they can also improve it in others. This fact sheet reviews the visual aspects of different levels of prescribed burning.Other publications in this series...

Visual aided pacing in respiratory maneuvers

Energy Technology Data Exchange (ETDEWEB)

Rambaudi, L R [Laboratorio de Biofisica y Fisiologia ' Antonio Sadi Frumento' (Argentina); Rossi, E [Catedra de Bioingenieria II (Argentina); Mantaras, M C [Catedra de Bioingenieria II (Argentina); Perrone, M S [Laboratorio de Biofisica y Fisiologia ' Antonio Sadi Frumento' (Argentina); Siri, L Nicola [Catedra de Bioingenieria II (Argentina)

2007-11-15

A visual aid to pace self-controlled respiratory cycles in humans is presented. Respiratory manoeuvres need to be accomplished in several clinic and research procedures, among others, the studies on Heart Rate Variability. Free running respiration turns to be difficult to correlate with other physiologic variables. Because of this fact, voluntary self-control is asked from the individuals under study. Currently, an acoustic metronome is used to pace respiratory frequency, its main limitation being the impossibility to induce predetermined timing in the stages within the respiratory cycle. In the present work, visual driven self-control was provided, with separate timing for the four stages of a normal respiratory cycle. This visual metronome (ViMet) was based on a microcontroller which power-ON and -OFF an eight-LED bar, in a four-stage respiratory cycle time series handset by the operator. The precise timing is also exhibited on an alphanumeric display.

Visual aided pacing in respiratory maneuvers

International Nuclear Information System (INIS)

Rambaudi, L R; Rossi, E; Mantaras, M C; Perrone, M S; Siri, L Nicola

2007-01-01

A visual aid to pace self-controlled respiratory cycles in humans is presented. Respiratory manoeuvres need to be accomplished in several clinic and research procedures, among others, the studies on Heart Rate Variability. Free running respiration turns to be difficult to correlate with other physiologic variables. Because of this fact, voluntary self-control is asked from the individuals under study. Currently, an acoustic metronome is used to pace respiratory frequency, its main limitation being the impossibility to induce predetermined timing in the stages within the respiratory cycle. In the present work, visual driven self-control was provided, with separate timing for the four stages of a normal respiratory cycle. This visual metronome (ViMet) was based on a microcontroller which power-ON and -OFF an eight-LED bar, in a four-stage respiratory cycle time series handset by the operator. The precise timing is also exhibited on an alphanumeric display

AVATAR -- Adaptive Visualization Aid for Touring And Recovery

Energy Technology Data Exchange (ETDEWEB)

L. O. Hall; K. W. Bowyer; N. Chawla; T. Moore, Jr.; W. P. Kegelmeyer

2000-01-01

This document provides a report on the initial development of software which uses a standard visualization tool to determine, label and display salient regions in large 3D physics simulation datasets. This software uses parallel pattern recognition behind the scenes to handle the huge volume of data. This software is called AVATAR (Adaptive Visualization Aid for Touring and Recovery). It integrates approaches to gathering labeled training data, learning from large training sets utilizing parallelism and the final display of salient data in unseen visualization data sets. The paper uses vorticity fields for a large-eddy simulation to illustrate the method.

Senior Aids for Senior Readers; A Visual Aids Pamphlet for the Elderly.

Science.gov (United States)

Houston Public Library, TX.

A pamphlet on special aids for senior library users lists items available from the Houston Public Library. Magnifiers (some illuminated), bedspecs (prism glasses), book holders, large print telephone dials, and games suitable for the visually handicapped or bedridden are described. The library's collections of slides and films, both 8mm and 16mm,…

Constructing publics, preventing diseases and medicalizing bodies: HIV, AIDS, and its visual cultures

Directory of Open Access Journals (Sweden)

Fabrizzio Mc Manus

Full Text Available Abstract: In this paper we analyze the visual cultures surrounding HIV and AIDS; we are especially interested in tracking the actors, discourses and visual cultures involved in AIDS prevention in Mexico for a period of twenty years: from 1985 to 2005. We use media studies to better comprehend how HIV and AIDS further medicalized human bodies by mobilizing specific discourses, metaphors and visual resources that, though promoting a better understanding of how HIV could be acquired and how it could be prevented, also generated new representations of sexuality, bodies and persons living with HIV or AIDS often biased in favor of different systems of value. Moreover, we try to offer a general characterization of the different publics that were targeted and preconceptions involving ethnicity, gender, sexual orientation, geography and membership in different sociocultural groups.

Aurally Aided Visual Search Performance Comparing Virtual Audio Systems

DEFF Research Database (Denmark)

Larsen, Camilla Horne; Lauritsen, David Skødt; Larsen, Jacob Junker

2014-01-01

Due to increased computational power, reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between a HRTF enhanced audio system (3D) and an...... with white dots. The results indicate that 3D audio yields faster search latencies than panning audio, especially with larger amounts of distractors. The applications of this research could fit virtual environments such as video games or virtual simulations.......Due to increased computational power, reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between a HRTF enhanced audio system (3D...

Aurally Aided Visual Search Performance Comparing Virtual Audio Systems

DEFF Research Database (Denmark)

Larsen, Camilla Horne; Lauritsen, David Skødt; Larsen, Jacob Junker

2014-01-01

Due to increased computational power reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between an HRTF enhanced audio system (3D) and an...... with white dots. The results indicate that 3D audio yields faster search latencies than panning audio, especially with larger amounts of distractors. The applications of this research could fit virtual environments such as video games or virtual simulations.......Due to increased computational power reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between an HRTF enhanced audio system (3D...

Audio-Visual Aid in Teaching "Fatty Liver"

Science.gov (United States)

Dash, Sambit; Kamath, Ullas; Rao, Guruprasad; Prakash, Jay; Mishra, Snigdha

2016-01-01

Use of audio visual tools to aid in medical education is ever on a rise. Our study intends to find the efficacy of a video prepared on "fatty liver," a topic that is often a challenge for pre-clinical teachers, in enhancing cognitive processing and ultimately learning. We prepared a video presentation of 11:36 min, incorporating various…

Proper Use of Audio-Visual Aids: Essential for Educators.

Science.gov (United States)

Dejardin, Conrad

1989-01-01

Criticizes educators as the worst users of audio-visual aids and among the worst public speakers. Offers guidelines for the proper use of an overhead projector and the development of transparencies. (DMM)

Low Vision Aids for Visually Impaired Children

Science.gov (United States)

Schurink, J.; Cox, R. F. A.; Cillessen, A. H. N.; van Rens, G. H. M. B.; Boonstra, F. N.

2011-01-01

It is a widely accepted belief in clinical practice that children with a visual impairment can profit from the use of a low vision aid (LVA). However, we found a considerable gap in our scientific understanding of LVA use, particularly in young children. This is the reason for the analysis presented in this paper. A selected overview of LVA use in…

THE USE OF VISUAL AIDS IN A SOCIO-INTERACTIVE ENVIRONMENT O USO DO VISUAL AIDS EM UM CONTEXTO SÓCIO-AMBIENTE INTERATIVO

Directory of Open Access Journals (Sweden)

TÂNIA REGINA VIEIRA

2002-01-01

Full Text Available The need for audiovisual materials in the EFL classroom arises from the factthat the association of visual aids with the new language makes meaning moredirect and quick to understand than through verbal explanation, attracts thestudents’ attention and aids concentration. Learning a language through visualaids in collaboration with other peers makes the experience more productiveand profitable. Therefore, this work discusses how the use of visual aids in asocio-interactive environment can improve students’ ability to learn a language.A necessidade do uso de recursos visuais em uma aula de língua estrangeiraderiva do fato de que a associação de imagens à nova língua torna o significadomais direto e fácil de compreender do que por explicações verbais, atrai a atençãodos alunos e ajuda na concentração. Aprender uma língua através de recursosvisuais em colaboração com outros colegas torna a experiência mais produtivae proveitosa. Assim, este trabalho discute como o uso de recursos visuais emum contexto sociointerativo pode melhorar a capacidade dos alunos paraaprender uma língua.

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 03: visualizing forest structure and fuels

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

The software described in this fact sheet provides managers with tools for visualizing forest and fuels information. Computer-based landscape simulations can help visualize stand and landscape conditions and the effects of different management treatments and fuel changes over time. These visualizations can assist forest planning by considering a range of management...

New tools to aid in scientific computing and visualization

International Nuclear Information System (INIS)

Wallace, M.G.; Christian-Frear, T.L.

1992-01-01

In this paper, two computer programs are described which aid in the pre- and post-processing of computer generated data. CoMeT (Computational Mechanics Toolkit) is a customizable, interactive, graphical, menu-driven program that provides the analyst with a consistent user-friendly interface to analysis codes. Trans Vol (Transparent Volume Visualization) is a specialized tool for the scientific three-dimensional visualization of complex solids by the technique of volume rendering. Both tools are described in basic detail along with an application example concerning the simulation of contaminant migration from an underground nuclear repository

Teacher’s Voice on Metacognitive Strategy Based Instruction Using Audio Visual Aids for Listening

Directory of Open Access Journals (Sweden)

Salasiah Salasiah

2018-02-01

Full Text Available The paper primarily stresses on exploring the teacher’s voice toward the application of metacognitive strategy with audio-visual aid in improving listening comprehension. The metacognitive strategy model applied in the study was inspired from Vandergrift and Tafaghodtari (2010 instructional model. Thus it is modified in the procedure and applied with audio-visual aids for improving listening comprehension. The study’s setting was at SMA Negeri 2 Parepare, South Sulawesi Province, Indonesia. The population of the research was the teacher of English at tenth grade at SMAN 2. The sample was taken by using random sampling technique. The data was collected by using in depth interview during the research, recorded, and analyzed using qualitative analysis. This study explored the teacher’s response toward the modified model of metacognitive strategy with audio visual aids in class of listening which covers positive and negative response toward the strategy applied during the teaching of listening. The result of data showed that this strategy helped the teacher a lot in teaching listening comprehension as the procedure has systematic steps toward students’ listening comprehension. Also, it eases the teacher to teach listening by empowering audio visual aids such as video taken from youtube.

Using Cascading Style Sheets to Design a Fly-Out Menu with Microsoft Visual Studio

Science.gov (United States)

Liu, Chang; Downing, Charles

2010-01-01

The menu has become an integrated component within nearly all professionally designed websites. This teaching tip presents a no-code way to design either a vertical or a horizontal fly-out menu by using Cascading Style Sheets (CSS) within Microsoft Visual Studio 2008. The approach described in this tip helps students fully understand how to…

Computer aided system for parametric design of combination die

Science.gov (United States)

Naranje, Vishal G.; Hussein, H. M. A.; Kumar, S.

2017-09-01

In this paper, a computer aided system for parametric design of combination dies is presented. The system is developed using knowledge based system technique of artificial intelligence. The system is capable to design combination dies for production of sheet metal parts having punching and cupping operations. The system is coded in Visual Basic and interfaced with AutoCAD software. The low cost of the proposed system will help die designers of small and medium scale sheet metal industries for design of combination dies for similar type of products. The proposed system is capable to reduce design time and efforts of die designers for design of combination dies.

Designing Visual Aids That Promote Risk Literacy: A Systematic Review of Health Research and Evidence-Based Design Heuristics.

Science.gov (United States)

Garcia-Retamero, Rocio; Cokely, Edward T

2017-06-01

Background Effective risk communication is essential for informed decision making. Unfortunately, many people struggle to understand typical risk communications because they lack essential decision-making skills. Objective The aim of this study was to review the literature on the effect of numeracy on risk literacy, decision making, and health outcomes, and to evaluate the benefits of visual aids in risk communication. Method We present a conceptual framework describing the influence of numeracy on risk literacy, decision making, and health outcomes, followed by a systematic review of the benefits of visual aids in risk communication for people with different levels of numeracy and graph literacy. The systematic review covers scientific research published between January 1995 and April 2016, drawn from the following databases: Web of Science, PubMed, PsycINFO, ERIC, Medline, and Google Scholar. Inclusion criteria were investigation of the effect of numeracy and/or graph literacy, and investigation of the effect of visual aids or comparison of their effect with that of numerical information. Thirty-six publications met the criteria, providing data on 27,885 diverse participants from 60 countries. Results Transparent visual aids robustly improved risk understanding in diverse individuals by encouraging thorough deliberation, enhancing cognitive self-assessment, and reducing conceptual biases in memory. Improvements in risk understanding consistently produced beneficial changes in attitudes, behavioral intentions, trust, and healthy behaviors. Visual aids were found to be particularly beneficial for vulnerable and less skilled individuals. Conclusion Well-designed visual aids tend to be highly effective tools for improving informed decision making among diverse decision makers. We identify five categories of practical, evidence-based guidelines for heuristic evaluation and design of effective visual aids.

Attitude of medical students towards the use of audio visual aids during didactic lectures in pharmacology in a medical college of central India

OpenAIRE

Mehul Agrawal; Rajanish Kumar Sankdia

2016-01-01

Background: Students favour teaching methods employing audio visual aids over didactic lectures not using these aids. However, the optimum use of audio visual aids is essential for deriving their benefits. During a lecture, both the visual and auditory senses are used to absorb information. Different methods of lecture are and ndash; chalk and board, power point presentations (PPT) and mix of aids. This study was done to know the students' preference regarding the various audio visual aids, ...

Effects of Binaural Sensory Aids on the Development of Visual Perceptual Abilities in Visually Handicapped Infants. Final Report, April 15, 1982-November 15, 1982.

Science.gov (United States)

Hart, Verna; Ferrell, Kay

Twenty-four congenitally visually handicapped infants, aged 6-24 months, participated in a study to determine (1) those stimuli best able to elicit visual attention, (2) the stability of visual acuity over time, and (3) the effects of binaural sensory aids on both visual attention and visual acuity. Ss were dichotomized into visually handicapped…

Visual-Spatial Attention Aids the Maintenance of Object Representations in Visual Working Memory

Science.gov (United States)

Williams, Melonie; Pouget, Pierre; Boucher, Leanne; Woodman, Geoffrey F.

2013-01-01

Theories have proposed that the maintenance of object representations in visual working memory is aided by a spatial rehearsal mechanism. In this study, we used two different approaches to test the hypothesis that overt and covert visual-spatial attention mechanisms contribute to the maintenance of object representations in visual working memory. First, we tracked observers’ eye movements while remembering a variable number of objects during change-detection tasks. We observed that during the blank retention interval, participants spontaneously shifted gaze to the locations that the objects had occupied in the memory array. Next, we hypothesized that if attention mechanisms contribute to the maintenance of object representations, then drawing attention away from the object locations during the retention interval would impair object memory during these change-detection tasks. Supporting this prediction, we found that attending to the fixation point in anticipation of a brief probe stimulus during the retention interval reduced change-detection accuracy even on the trials in which no probe occurred. These findings support models of working memory in which visual-spatial selection mechanisms contribute to the maintenance of object representations. PMID:23371773

Effects of audio-visual aids on foreign language test anxiety, reading and listening comprehension, and retention in EFL learners.

Science.gov (United States)

Lee, Shu-Ping; Lee, Shin-Da; Liao, Yuan-Lin; Wang, An-Chi

2015-04-01

This study examined the effects of audio-visual aids on anxiety, comprehension test scores, and retention in reading and listening to short stories in English as a Foreign Language (EFL) classrooms. Reading and listening tests, general and test anxiety, and retention were measured in English-major college students in an experimental group with audio-visual aids (n=83) and a control group without audio-visual aids (n=94) with similar general English proficiency. Lower reading test anxiety, unchanged reading comprehension scores, and better reading short-term and long-term retention after four weeks were evident in the audiovisual group relative to the control group. In addition, lower listening test anxiety, higher listening comprehension scores, and unchanged short-term and long-term retention were found in the audiovisual group relative to the control group after the intervention. Audio-visual aids may help to reduce EFL learners' listening test anxiety and enhance their listening comprehension scores without facilitating retention of such materials. Although audio-visual aids did not increase reading comprehension scores, they helped reduce EFL learners' reading test anxiety and facilitated retention of reading materials.

Mental practice with interactive 3D visual aids enhances surgical performance.

Science.gov (United States)

Yiasemidou, Marina; Glassman, Daniel; Mushtaq, Faisal; Athanasiou, Christos; Williams, Mark-Mon; Jayne, David; Miskovic, Danilo

2017-10-01

Evidence suggests that Mental Practice (MP) could be used to finesse surgical skills. However, MP is cognitively demanding and may be dependent on the ability of individuals to produce mental images. In this study, we hypothesised that the provision of interactive 3D visual aids during MP could facilitate surgical skill performance. 20 surgical trainees were case-matched to one of three different preparation methods prior to performing a simulated Laparoscopic Cholecystectomy (LC). Two intervention groups underwent a 25-minute MP session; one with interactive 3D visual aids depicting the relevant surgical anatomy (3D-MP group, n = 5) and one without (MP-Only, n = 5). A control group (n = 10) watched a didactic video of a real LC. Scores relating to technical performance and safety were recorded by a surgical simulator. The Control group took longer to complete the procedure relative to the 3D&MP condition (p = .002). The number of movements was also statistically different across groups (p = .001), with the 3D&MP group making fewer movements relative to controls (p = .001). Likewise, the control group moved further in comparison to the 3D&MP condition and the MP-Only condition (p = .004). No reliable differences were observed for safety metrics. These data provide evidence for the potential value of MP in improving performance. Furthermore, they suggest that 3D interactive visual aids during MP could potentially enhance performance, beyond the benefits of MP alone. These findings pave the way for future RCTs on surgical preparation and performance.

Preliminary Investigation of Visual Attention to Human Figures in Photographs: Potential Considerations for the Design of Aided AAC Visual Scene Displays

Science.gov (United States)

Wilkinson, Krista M.; Light, Janice

2011-01-01

Purpose: Many individuals with complex communication needs may benefit from visual aided augmentative and alternative communication systems. In visual scene displays (VSDs), language concepts are embedded into a photograph of a naturalistic event. Humans play a central role in communication development and might be important elements in VSDs.…

Effectiveness of touch and feel (TAF) technique on first aid measures for visually challenged.

Science.gov (United States)

Mary, Helen; Sasikalaz, D; Venkatesan, Latha

2013-01-01

There is a common perception that a blind person cannot even help his own self. In order to challenge that view, a workshop for visually-impaired people to develop the skills to be independent and productive members of society was conceived. An experimental study was conducted at National Institute of Visually Handicapped, Chennai with the objective to assess the effectiveness of Touch and Feel (TAF) technique on first aid measures for the visually challenged. Total 25 visually challenged people were selected by non-probability purposive sampling technique and data was collected using demographic variable and structured knowledge questionnaire. The score obtained was categorised into three levels: inadequate (0-8), moderately adequate (8 - 17), adequate (17 -25). The study revealed that most of the visually challenged (40%) had inadequate knowledge, and 56 percent had moderately adequate and only few (4%) had adequate knowledge in the pre-test, whereas most (68%) of them had adequate knowledge in the post-test which is statistically significant at p TAF technique was effective for the visually challenged. There was no association between the demographic variables and their level of knowledge regarding first aid.

Audio-visual aid in teaching "fatty liver".

Science.gov (United States)

Dash, Sambit; Kamath, Ullas; Rao, Guruprasad; Prakash, Jay; Mishra, Snigdha

2016-05-06

Use of audio visual tools to aid in medical education is ever on a rise. Our study intends to find the efficacy of a video prepared on "fatty liver," a topic that is often a challenge for pre-clinical teachers, in enhancing cognitive processing and ultimately learning. We prepared a video presentation of 11:36 min, incorporating various concepts of the topic, while keeping in view Mayer's and Ellaway guidelines for multimedia presentation. A pre-post test study on subject knowledge was conducted for 100 students with the video shown as intervention. A retrospective pre study was conducted as a survey which inquired about students understanding of the key concepts of the topic and a feedback on our video was taken. Students performed significantly better in the post test (mean score 8.52 vs. 5.45 in pre-test), positively responded in the retrospective pre-test and gave a positive feedback for our video presentation. Well-designed multimedia tools can aid in cognitive processing and enhance working memory capacity as shown in our study. In times when "smart" device penetration is high, information and communication tools in medical education, which can act as essential aid and not as replacement for traditional curriculums, can be beneficial to the students. © 2015 by The International Union of Biochemistry and Molecular Biology, 44:241-245, 2016. © 2015 The International Union of Biochemistry and Molecular Biology.

Situational analysis of communication of HIV and AIDS information to persons with visual impairment: a case of Kang'onga Production Centre in Ndola, Zambia.

Science.gov (United States)

Chintende, Grace Nsangwe; Sitali, Doreen; Michelo, Charles; Mweemba, Oliver

2017-04-04

Despite the increases in health promotion and educational programs on HIV and AIDS, lack of information and communication on HIV and AIDS for the visually impaired persons continues. The underlying factors that create the information and communication gaps have not been fully explored in Zambia. It is therefore important that, this situational analysis on HIV and AIDS information dissemination to persons with visual impairments at Kang'onga Production Centre in Ndola was conducted. The study commenced in December 2014 to May 2015. A qualitative case study design was employed. The study used two focus group discussions with males and females. Each group comprised twelve participants. Eight in-depth interviews involving the visually impaired persons and five key informants working with visually impaired persons were conducted. Data was analysed thematically using NVIVO 8 software. Ethical clearance was sought from Excellency in Research Ethics and Science. Reference Number 2014-May-030. It was established that most visually impaired people lacked knowledge on the cause, transmission and treatment of HIV and AIDS resulting in misconceptions. It was revealed that health promoters and people working with the visually impaired did not have specific HIV and AIDS information programs in Zambia. Further, it was discovered that the media, information education communication and health education were channels through which the visually impaired accessed HIV and AIDS information. Discrimination, stigma, lack of employment opportunities, funding and poverty were among the many challenges identified which the visually impaired persons faced in accessing HIV and AIDS information. Integration of the visually impaired in HIV and AIDS programs would increase funding for economic empowerment and health promotions in order to improve communication on HIV and AIDS information. The study showed that, the visually impaired persons in Zambia are not catered for in the dissemination of HIV

The Film as Visual Aided Learning Tool in Classroom Management Course

Science.gov (United States)

Altinay Gazi, Zehra; Altinay Aksal, Fahriye

2011-01-01

This research aims to investigate the impact of the visual aided learning on pre-service teachers' co-construction of subject matter knowledge in teaching practice. The study revealed the examination of film as an active cognizing and learning tool in classroom management course within teacher education programme. Within the framework of action…

Clustering methods and visualization algorithms to aid nuclear reactor operative diagnostics

International Nuclear Information System (INIS)

Pepelyshev, Yu.N.; Dzwinel, W.

1990-01-01

The software system developed plays the role of the aid to an operator for nuclear reactor diagnostics. The noise analysis of the reactor parameters such as power, temperature and coolant flow rate constitutes the basis of the system. Combination of data acquisition, data preprocessing, clustering and cluster visualization algorithms with heuristic techniques of results analysis, determine the way of its implementation. Two regimes are available. The first one - extended - is recommended for a long term investigations and the second - suppressed for the aid to the reactor operation monitoring. The system has been tested and developed at the JINR IBR-2 pulsed reactor. 13 refs.; 4 figs.; 2 tabs

Visual objects and universal meanings: AIDS posters and the politics of globalisation and history.

Science.gov (United States)

Stein, Claudia; Cooter, Roger

2011-01-01

Drawing on recent visual and spatial turns in history writing, this paper considers AIDS posters from the perspective of their museum 'afterlife' as collected material objects. Museum spaces serve changing political and epistemological projects, and the visual objects they house are not immune from them. A recent globally themed exhibition of AIDS posters at an arts and crafts museum in Hamburg is cited in illustration. The exhibition also serves to draw attention to institutional continuities in collecting agendas. Revealed, contrary to postmodernist expectations, is how today's application of aesthetic display for the purpose of making 'global connections' does not radically break with the virtues and morals attached to the visual at the end of the nineteenth century. The historicisation of such objects needs to take into account this complicated mix of change and continuity in aesthetic concepts and political inscriptions. Otherwise, historians fall prey to seductive aesthetics without being aware of the politics of them. This article submits that aesthetics is politics.

Visual Objects and Universal Meanings: AIDS Posters and the Politics of Globalisation and History

Science.gov (United States)

STEIN, CLAUDIA; COOTER, ROGER

2011-01-01

Drawing on recent visual and spatial turns in history writing, this paper considers AIDS posters from the perspective of their museum ‘afterlife’ as collected material objects. Museum spaces serve changing political and epistemological projects, and the visual objects they house are not immune from them. A recent globally themed exhibition of AIDS posters at an arts and crafts museum in Hamburg is cited in illustration. The exhibition also serves to draw attention to institutional continuities in collecting agendas. Revealed, contrary to postmodernist expectations, is how today’s application of aesthetic display for the purpose of making ‘global connections’ does not radically break with the virtues and morals attached to the visual at the end of the nineteenth century. The historicisation of such objects needs to take into account this complicated mix of change and continuity in aesthetic concepts and political inscriptions. Otherwise, historians fall prey to seductive aesthetics without being aware of the politics of them. This article submits that aesthetics is politics. PMID:23752866

A Visual-Aided Inertial Navigation and Mapping System

Directory of Open Access Journals (Sweden)

Rodrigo Munguía

2016-05-01

Full Text Available State estimation is a fundamental necessity for any application involving autonomous robots. This paper describes a visual-aided inertial navigation and mapping system for application to autonomous robots. The system, which relies on Kalman filtering, is designed to fuse the measurements obtained from a monocular camera, an inertial measurement unit (IMU and a position sensor (GPS. The estimated state consists of the full state of the vehicle: the position, orientation, their first derivatives and the parameter errors of the inertial sensors (i.e., the bias of gyroscopes and accelerometers. The system also provides the spatial locations of the visual features observed by the camera. The proposed scheme was designed by considering the limited resources commonly available in small mobile robots, while it is intended to be applied to cluttered environments in order to perform fully vision-based navigation in periods where the position sensor is not available. Moreover, the estimated map of visual features would be suitable for multiple tasks: i terrain analysis; ii three-dimensional (3D scene reconstruction; iii localization, detection or perception of obstacles and generating trajectories to navigate around these obstacles; and iv autonomous exploration. In this work, simulations and experiments with real data are presented in order to validate and demonstrate the performance of the proposal.

AIDS Myths and Misunderstandings

Science.gov (United States)

... 21, 2014 Select a Language: Fact Sheet 158 AIDS Myths and Misunderstandings WHY ARE THERE SO MANY ... support this belief. Myth: Current medications can cure AIDS. It’s no big deal if you get infected. ...

Fuels planning: science synthesis and integration; social issues fact sheet 13: Strategies for managing fuels and visual quality

Science.gov (United States)

Christine Esposito

2006-01-01

The public's acceptance of forest management practices, including fuels reduction, is heavily based on how forests look. Fuels managers can improve their chances of success by considering aesthetics when making management decisions. This fact sheet reviews a three-part general strategy for managing fuels and visual quality: planning, implementation, and monitoring...

A Generalized Visual Aid System for Teleoperation Applied to Satellite Servicing

Directory of Open Access Journals (Sweden)

Guoliang Zhang

2014-02-01

Full Text Available This paper presents the latest results of a newly developed visual aid system for direct teleoperation. This method is extended to visual control to make an efficient teleoperation system by combining direct teleoperation and automatic control. On the one hand, an operator can conduct direct teleoperation with 3D graphic prediction simulation established by the VR technique. In order to remove inconsistencies between the virtual and real environments, a practical model-matching method is investigated. On the other hand, to realize real-time visual servoing control, a particular object recognition and pose estimation algorithm based on polygonal approximation is investigated to ensure a low computational cost for image processing. To avoid undesired forces involved in contact operation, 3D visual servoing incorporating a compliant control based on impedance control is developed. Finally, in a representative laboratory environment, a typical satellite servicing experiment is carried out based on this combined system. Experimental results demonstrate the feasibility and the effectiveness of the proposed method.

Impact of oral health education by audio aids, braille and tactile models on the oral health status of visually impaired children of Bhopal City.

Science.gov (United States)

Gautam, Anjali; Bhambal, Ajay; Moghe, Swapnil

2018-01-01

Children with special needs face unique challenges in day-to-day practice. They are dependent on their close ones for everything. To improve oral hygiene in such visually impaired children, undue training and education are required. Braille is an important language for reading and writing for the visually impaired. It helps them understand and visualize the world via touch. Audio aids are being used to impart health education to the visually impaired. Tactile models help them perceive things which they cannot visualize and hence are an important learning tool. This study aimed to assess the improvement in oral hygiene by audio aids and Braille and tactile models in visually impaired children aged 6-16 years of Bhopal city. This was a prospective study. Sixty visually impaired children aged 6-16 years were selected and randomly divided into three groups (20 children each). Group A: audio aids + Braille, Group B: audio aids + tactile models, and Group C: audio aids + Braille + tactile models. Instructions were given for maintaining good oral hygiene and brushing techniques were explained to all children. After 3 months' time, the oral hygiene status was recorded and compared using plaque and gingival index. ANNOVA test was used. The present study showed a decrease in the mean plaque and gingival scores at all time intervals in individual group as compared to that of the baseline that was statistically significant. The study depicts that the combination of audio aids, Braille and tactile models is an effective way to provide oral health education and improve oral health status of visually impaired children.

SPEECH VISUALIZATION SISTEM AS A BASIS FOR SPEECH TRAINING AND COMMUNICATION AIDS

Directory of Open Access Journals (Sweden)

Oliana KRSTEVA

1997-09-01

Full Text Available One receives much more information through a visual sense than through a tactile one. However, most visual aids for hearing-impaired persons are not wearable because it is difficult to make them compact and it is not a best way to mask always their vision.Generally it is difficult to get the integrated patterns by a single mathematical transform of signals, such as a Foruier transform. In order to obtain the integrated pattern speech parameters should be carefully extracted by an analysis according as each parameter, and a visual pattern, which can intuitively be understood by anyone, must be synthesized from them. Successful integration of speech parameters will never disturb understanding of individual features, so that the system can be used for speech training and communication.

Impact of oral health education by audio aids, braille and tactile models on the oral health status of visually impaired children of Bhopal City

Directory of Open Access Journals (Sweden)

Anjali Gautam

2018-01-01

Full Text Available Context: Children with special needs face unique challenges in day-to-day practice. They are dependent on their close ones for everything. To improve oral hygiene in such visually impaired children, undue training and education are required. Braille is an important language for reading and writing for the visually impaired. It helps them understand and visualize the world via touch. Audio aids are being used to impart health education to the visually impaired. Tactile models help them perceive things which they cannot visualize and hence are an important learning tool. Aim: This study aimed to assess the improvement in oral hygiene by audio aids and Braille and tactile models in visually impaired children aged 6–16 years of Bhopal city. Settings and Design: This was a prospective study. Materials and Methods: Sixty visually impaired children aged 6–16 years were selected and randomly divided into three groups (20 children each. Group A: audio aids + Braille, Group B: audio aids + tactile models, and Group C: audio aids + Braille + tactile models. Instructions were given for maintaining good oral hygiene and brushing techniques were explained to all children. After 3 months' time, the oral hygiene status was recorded and compared using plaque and gingival index. Statistical Analysis Used: ANNOVA test was used. Results: The present study showed a decrease in the mean plaque and gingival scores at all time intervals in individual group as compared to that of the baseline that was statistically significant. Conclusions: The study depicts that the combination of audio aids, Braille and tactile models is an effective way to provide oral health education and improve oral health status of visually impaired children.

APPLICATION OF COMPUTER-AIDED TOMOGRAPHY TO VISUALIZE AND QUANTIFY BIOGENIC STRUCTURES IN MARINE SEDIMENTS

Science.gov (United States)

We used computer-aided tomography (CT) for 3D visualization and 2D analysis ofmarine sediment cores from 3 stations (at 10, 75 and 118 m depths) with different environmentalimpact. Biogenic structures such as tubes and burrows were quantified and compared among st...

High resolution light-sheet based high-throughput imaging cytometry system enables visualization of intra-cellular organelles

Science.gov (United States)

Regmi, Raju; Mohan, Kavya; Mondal, Partha Pratim

2014-09-01

Visualization of intracellular organelles is achieved using a newly developed high throughput imaging cytometry system. This system interrogates the microfluidic channel using a sheet of light rather than the existing point-based scanning techniques. The advantages of the developed system are many, including, single-shot scanning of specimens flowing through the microfluidic channel at flow rate ranging from micro- to nano- lit./min. Moreover, this opens-up in-vivo imaging of sub-cellular structures and simultaneous cell counting in an imaging cytometry system. We recorded a maximum count of 2400 cells/min at a flow-rate of 700 nl/min, and simultaneous visualization of fluorescently-labeled mitochondrial network in HeLa cells during flow. The developed imaging cytometry system may find immediate application in biotechnology, fluorescence microscopy and nano-medicine.

Hearing Aid with Visual Indicator

DEFF Research Database (Denmark)

2004-01-01

The invention comprises a hearing aid, which has a casing containing a signal receiving part for receiving an audio signal, an audio transducer for providing an audio signal to the user, a signal transmission path between the signal receiving part and the audio transducer, whereby a battery...... is provided for powering the signal receiving part, the signal path and the audio transducer, and where further means are provided for assessing the function of the hearing aid and for generating an electrical indication signal which indicates the function of the hearing aid and where further means...... are provided for intermittently generating a power signal in response to the electrical indication signal and where means are provided for converting the power signal into a light signal, such that the light signal is visible from outside the hearing aid....

AIDS and Chemical Dependency.

Science.gov (United States)

Pohl, Melvin I.

After defining HIV and the AIDS disease and outlining symptoms and means of infection, this fact sheet lists the ways alcohol and drugs are involved with the AIDS epidemic, noting that needle-sharing transmits the virus; that alcohol or mood-altering drugs like crack cocaine cause disinhibition, increase sex drive, encourage sex for drugs, and…

3D pattern of brain atrophy in HIV/AIDS visualized using tensor-based morphometry

Science.gov (United States)

Chiang, Ming-Chang; Dutton, Rebecca A.; Hayashi, Kiralee M.; Lopez, Oscar L.; Aizenstein, Howard J.; Toga, Arthur W.; Becker, James T.; Thompson, Paul M.

2011-01-01

35% of HIV-infected patients have cognitive impairment, but the profile of HIV-induced brain damage is still not well understood. Here we used tensor-based morphometry (TBM) to visualize brain deficits and clinical/anatomical correlations in HIV/AIDS. To perform TBM, we developed a new MRI-based analysis technique that uses fluid image warping, and a new α-entropy-based information-theoretic measure of image correspondence, called the Jensen–Rényi divergence (JRD). Methods 3D T1-weighted brain MRIs of 26 AIDS patients (CDC stage C and/or 3 without HIV-associated dementia; 47.2 ± 9.8 years; 25M/1F; CD4+ T-cell count: 299.5 ± 175.7/µl; log10 plasma viral load: 2.57 ± 1.28 RNA copies/ml) and 14 HIV-seronegative controls (37.6 ± 12.2 years; 8M/6F) were fluidly registered by applying forces throughout each deforming image to maximize the JRD between it and a target image (from a control subject). The 3D fluid registration was regularized using the linearized Cauchy–Navier operator. Fine-scale volumetric differences between diagnostic groups were mapped. Regions were identified where brain atrophy correlated with clinical measures. Results Severe atrophy (~15–20% deficit) was detected bilaterally in the primary and association sensorimotor areas. Atrophy of these regions, particularly in the white matter, correlated with cognitive impairment (P=0.033) and CD4+ T-lymphocyte depletion (P=0.005). Conclusion TBM facilitates 3D visualization of AIDS neuropathology in living patients scanned with MRI. Severe atrophy in frontoparietal and striatal areas may underlie early cognitive dysfunction in AIDS patients, and may signal the imminent onset of AIDS dementia complex. PMID:17035049

Spatial probability aids visual stimulus discrimination

Directory of Open Access Journals (Sweden)

Michael Druker

2010-08-01

Full Text Available We investigated whether the statistical predictability of a target's location would influence how quickly and accurately it was classified. Recent results have suggested that spatial probability can be a cue for the allocation of attention in visual search. One explanation for probability cuing is spatial repetition priming. In our two experiments we used probability distributions that were continuous across the display rather than relying on a few arbitrary screen locations. This produced fewer spatial repeats and allowed us to dissociate the effect of a high probability location from that of short-term spatial repetition. The task required participants to quickly judge the color of a single dot presented on a computer screen. In Experiment 1, targets were more probable in an off-center hotspot of high probability that gradually declined to a background rate. Targets garnered faster responses if they were near earlier target locations (priming and if they were near the high probability hotspot (probability cuing. In Experiment 2, target locations were chosen on three concentric circles around fixation. One circle contained 80% of targets. The value of this ring distribution is that it allowed for a spatially restricted high probability zone in which sequentially repeated trials were not likely to be physically close. Participant performance was sensitive to the high-probability circle in addition to the expected effects of eccentricity and the distance to recent targets. These two experiments suggest that inhomogeneities in spatial probability can be learned and used by participants on-line and without prompting as an aid for visual stimulus discrimination and that spatial repetition priming is not a sufficient explanation for this effect. Future models of attention should consider explicitly incorporating the probabilities of targets locations and features.

Educational aids

International Nuclear Information System (INIS)

Lenkeit, S.

1989-01-01

Educational aids include printed matter, aural media, visual media, audiovisual media and objects. A distinction is made between learning aids, which include blackboards, overhead projectors, flipcharts, wallcharts and pinboards, and learning aids, which include textbooks, worksheets, documentation and experimental equipment. The various aids are described and their use explained. The aids available at the School for Nuclear Technology of the Karlsruhe Nuclear Research Centre are described

Visual Aids for Improving Patient Decision Making in Severe Symptomatic Carotid Stenosis.

Science.gov (United States)

Fridman, Sebastian; Saposnik, Gustavo; Sposato, Luciano A

2017-12-01

Because of the large amount of information to process and the limited time of a clinical consult, choosing between carotid endarterectomy (CEA) and carotid angioplasty with stenting (CAS) can be confusing for patients with severe symptomatic internal carotid stenosis (ICA). We aim to develop a visual aid tool to help clinicians and patients in the decision-making process of selecting between CEA and CAS. Based on pooled analysis from randomized controlled trials including patients with symptomatic and severe ICA (SSICA), we generated visual plots comparing CEA with CAS for 3 prespecified postprocedural time points: (1) any stroke or death at 4 months, and (2) any stroke or death in the first 30 days and ipsilateral stroke thereafter at 5 years and (3) at 10 years. A total of 4574 participants (2393 assigned to CAS, and 2361 to CEA) were included in the analyses. For every 100 patients with SSICA, 6 would develop any stroke or death in the CEA group compared with 9 undergoing CAS at 4 months (hazard ratio [HR] 1.53; 95%CI 1.20-1.95). At 5 years, 7 patients in the CEA group would develop any periprocedural stroke or death and ipsilateral stroke thereafter versus 12 undergoing CAS (HR 1.72; 95%CI 1.24-2.39), compared with 10 patients in the CEA and 13 in the CAS groups at 10 years (HR 1.17; 95%CI 0.82-1.66). Visual aids presented in this study could potentially help patients with severe symptomatic internal carotid stenosis to better weigh the risks and benefits of CEA versus CAS as a function of time, allowing for the prioritization of personal preferences, and should be prospectively assessed. Copyright © 2017 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Graphs as a Visual Aid in English for Special Purposes. Lenguas para objetivos especificos (Languages for Special Purposes), No. 5.

Science.gov (United States)

Stark, Merritt W.; Stark, Kathleen LaPiana

Visual aids have been developed to strengthen non-English speaking students' ability to speak and write English effectively in their subject areas. Among these aids, graphs have been valuable for economics students because they readily illustrate the nature of the relationship between two sets of numbers. Frequently, the ability to analyze graphs…

Spread-sheet application to classify radioactive material for shipment

International Nuclear Information System (INIS)

Brown, A.N.

1998-01-01

A spread-sheet application has been developed at the Idaho National Engineering and Environmental Laboratory to aid the shipper when classifying nuclide mixtures of normal form, radioactive materials. The results generated by this spread-sheet are used to confirm the proper US DOT classification when offering radioactive material packages for transport. The user must input to the spread-sheet the mass of the material being classified, the physical form (liquid or not) and the activity of each regulated nuclide. The spread-sheet uses these inputs to calculate two general values: 1)the specific activity of the material and a summation calculation of the nuclide content. The specific activity is used to determine if the material exceeds the DOT minimal threshold for a radioactive material. If the material is calculated to be radioactive, the specific activity is also used to determine if the material meets the activity requirement for one of the three low specific activity designations (LSA-I, LSA-II, LSA-III, or not LSA). Again, if the material is calculated to be radioactive, the summation calculation is then used to determine which activity category the material will meet (Limited Quantity, Type A, Type B, or Highway Route Controlled Quantity). This spread-sheet has proven to be an invaluable aid for shippers of radioactive materials at the Idaho National Engineering and Environmental Laboratory. (authors)

Impact of Visual Aids in Enhancing the Learning Process Case Research: District Dera Ghazi Khan

Science.gov (United States)

Shabiralyani, Ghulam; Hasan, Khuram Shahzad; Hamad, Naqvi; Iqbal, Nadeem

2015-01-01

This research explores teachers' opinions on the use of visual aids (e.g., pictures, animation videos, projectors and films) as a motivational tool in enhancing students' attention in reading literary texts. To accomplish the aim of the research, a closed ended questionnaire was used to collect the required data. The targeted population for this…

Observation of Depictive Versus Tracing Gestures Selectively Aids Verbal Versus Visual-Spatial Learning in Primary School Children

NARCIS (Netherlands)

van Wermeskerken, Margot; Fijan, Nathalie; Eielts, Charly; Pouw, Wim T. J. L.

2016-01-01

Previous research has established that gesture observation aids learning in children. The current study examined whether observation of gestures (i.e. depictive and tracing gestures) differentially affected verbal and visual-spatial retention when learning a route and its street names. Specifically,

Using visual aids to improve communication of risks about health: a review.

Science.gov (United States)

Garcia-Retamero, Rocio; Okan, Yasmina; Cokely, Edward T

2012-01-01

Recent research has shown that patients frequently experience difficulties understanding health-relevant numerical concepts. A prominent example is denominator neglect, or the tendency to pay too much attention to numerators in ratios (e.g., number of treated patients who died) with insufficient attention to denominators (e.g., overall number of treated patients). Denominator neglect can lead to inaccurate assessments of treatment risk reduction and thus can have important consequences for decisions about health. Here, we reviewed a series of studies investigating (1) different factors that can influence patients' susceptibility to denominator neglect in medical decision making--including numerical or language-related abilities; (2) the extent to which denominator neglect can be attenuated by using visual aids; and (3) a factor that moderates the effectiveness of such aids (i.e., graph literacy). The review spans probabilistic national U.S. and German samples, as well as immigrant (i.e., Polish people living in the United Kingdom) and undergraduate samples in Spain. Theoretical and prescriptive implications are discussed.

Effective communication of risks to young adults: using message framing and visual aids to increase condom use and STD screening.

Science.gov (United States)

Garcia-Retamero, Rocio; Cokely, Edward T

2011-09-01

Sexually Transmitted Diseases (STDs)-including HIV/AIDS-are among the most common infectious diseases in young adults. How can we effectively promote prevention and detection of STDs in this high risk population? In a two-phase longitudinal experiment we examined the effects of a brief risk awareness intervention (i.e., a sexual health information brochure) in a large sample of sexually active young adults (n = 744). We assessed the influence of gain- and loss-framed messages, and visual aids, on affective reactions, risk perceptions, attitudes, behavioral intentions, and reported behaviors relating to the prevention and detection of STDs. Results indicate that gain-framed messages induced greater adherence for prevention behaviors (e.g., condom use), whereas loss-framed messages were more effective in promoting illness-detecting behaviors (e.g., making an appointment with a doctor to discuss about STD screening). The influence of the framed messages on prevention and detection of STDs was mediated by changes in participants' attitudes toward the health behaviors along with changes in their behavioral intentions. Moreover, when visual aids were added to the health information, both the gain- and loss-framed messages became equally and highly effective in promoting health behaviors. These results converge with other data indicating that well-constructed visual aids are often among the most highly effective, transparent, fast, memorable, and ethically desirable means of risk communication. Theoretical, economic, and public policy implications of these results are discussed. (c) 2011 APA, all rights reserved.

[Clip Sheets from BOCES. Opportunities. Health. Careers. = Oportunidades. Salud. Una Camera En...

Science.gov (United States)

State Univ. of New York, Geneseo. Coll. at Geneseo. Migrant Center.

This collection of 83 clip sheets, or classroom handouts, was created to help U.S. migrants learn more about health, careers, and general "opportunities" including education programs. They are written in both English and Spanish and are presented in an easily understandable format. Health clip-sheet topics include the following: Abuse; AIDS;…

Computer aided system for segmentation and visualization of microcalcifications in digital mammograms

International Nuclear Information System (INIS)

Reljin, B.; Reljin, I.; Milosevic, Z.; Stojic, T.

2009-01-01

Two methods for segmentation and visualization of microcalcifications in digital or digitized mammograms are described. First method is based on modern mathematical morphology, while the second one uses the multifractal approach. In the first method, by using an appropriate combination of some morphological operations, high local contrast enhancement, followed by significant suppression of background tissue, irrespective of its radiology density, is obtained. By iterative procedure, this method highly emphasizes only small bright details, possible microcalcifications. In a multifractal approach, from initial mammogram image, a corresponding multifractal 'images' are created, from which a radiologist has a freedom to change the level of segmentation. An appropriate user friendly computer aided visualization (CAV) system with embedded two methods is realized. The interactive approach enables the physician to control the level and the quality of segmentation. Suggested methods were tested through mammograms from MIAS database as a gold standard, and from clinical praxis, using digitized films and digital images from full field digital mammograph. (authors)

The Physical Costs and Psychosocial Benefits of Travel Aids for Persons Who Are Visually Impaired or Blind.

Science.gov (United States)

Gitlin, L. N.; Mount, J.; Lucas, W.; Weirich, L. C.; Gramberg, L.

1997-01-01

This study investigated the musculoskeletal consequences of travel aids, particularly white canes and guide dogs, as perceived by 21 individuals (ages 27-68) with visual impairments or blindness. They experienced a variety of negative physical effects that they denied, ignored, or minimized because of benefits derived from being independently…

Careers "Fact Sheets" for clinical engineering & biomedical technology.

Science.gov (United States)

Pacela, A F

1991-01-01

Three Careers "Fact Sheets" include information on CE and BMET job titles, job descriptions, and certification. These materials are intended to aid in furthering professional recognition for Clinical Engineers and BMETs, and may be useful in communicating with Administration or Human Resources departments.

Using Visual Aids to Improve Communication of Risks about Health: A Review

Directory of Open Access Journals (Sweden)

Rocio Garcia-Retamero

2012-01-01

Full Text Available Recent research has shown that patients frequently experience difficulties understanding health-relevant numerical concepts. A prominent example is denominator neglect, or the tendency to pay too much attention to numerators in ratios (e.g., number of treated patients who died with insufficient attention to denominators (e.g., overall number of treated patients. Denominator neglect can lead to inaccurate assessments of treatment risk reduction and thus can have important consequences for decisions about health. Here, we reviewed a series of studies investigating (1 different factors that can influence patients’ susceptibility to denominator neglect in medical decision making—including numerical or language-related abilities; (2 the extent to which denominator neglect can be attenuated by using visual aids; and (3 a factor that moderates the effectiveness of such aids (i.e., graph literacy. The review spans probabilistic national U.S. and German samples, as well as immigrant (i.e., Polish people living in the United Kingdom and undergraduate samples in Spain. Theoretical and prescriptive implications are discussed.

Developing visual images for communicating information about ...

African Journals Online (AJOL)

African Journal of AIDS Research ... The objective of this study was to design visuals or pictograms illustrating various ARV side effects and to ... adherence, patient education, South Africa, visual aids, visual communication, visual literacy

Gaze Patterns in Auditory-Visual Perception of Emotion by Children with Hearing Aids and Hearing Children

Directory of Open Access Journals (Sweden)

Yifang Wang

2017-12-01

Full Text Available This study investigated eye-movement patterns during emotion perception for children with hearing aids and hearing children. Seventy-eight participants aged from 3 to 7 were asked to watch videos with a facial expression followed by an oral statement, and these two cues were either congruent or incongruent in emotional valence. Results showed that while hearing children paid more attention to the upper part of the face, children with hearing aids paid more attention to the lower part of the face after the oral statement was presented, especially for the neutral facial expression/neutral oral statement condition. These results suggest that children with hearing aids have an altered eye contact pattern with others and a difficulty in matching visual and voice cues in emotion perception. The negative cause and effect of these gaze patterns should be avoided in earlier rehabilitation for hearing-impaired children with assistive devices.

Advanced training course on state systems of accounting for and control of nuclear materials. Volume II. Visual aids

International Nuclear Information System (INIS)

Sorenson, R.J.; Schneider, R.A.

1979-01-01

Purpose of the course was to train in the accounting and control of nuclear materials in a bulk processing facility, for international safeguards. The Exxon low enriched uranium fabrication plant is used as an example. This volume contains visual aids used for the presentation

Modification to the Monte Carlo N-Particle (MCNP) Visual Editor (MCNPVised) to Read in Computer Aided Design (CAD) Files

International Nuclear Information System (INIS)

Randolph Schwarz; Leland L. Carter; Alysia Schwarz

2005-01-01

Monte Carlo N-Particle Transport Code (MCNP) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle is internationally recognized as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant was used to enhance the capabilities of the MCNP Visual Editor to allow it to read in both 2D and 3D Computer Aided Design (CAD) files, allowing the user to electronically generate a valid MCNP input geometry

What can a teacher do with a cellphone? Using participatory visual research to speak back in addressing HIV&AIDS

Directory of Open Access Journals (Sweden)

Claudia Mitchell

2013-01-01

Full Text Available The ubiquity of cellphones in South Africa, a country ravaged by HIV and AIDS, makes cellphones an easily accessible tool to use in participatory approaches to addressing HIV (Human Immunodeficiency Virus and AIDS (Acquired Immunodeficiency Syndrome issues, particularly in school contexts. In this article we explore a participatory visual approach undertaken with a group of rural teachers, to uncover and address HIV and AIDS related issues. Drawing on our experience in using participatory video, we used cellphones to produce cellphilms about youth and risk in the context of HIV and AIDS. Noting that the teachers brought highly didactic and moralistic tones into the cellphilms, we devised a "speaking back" approach to encourage reflection and an adjustment to their approaches when addressing HIV and AIDS issues with learners. We draw on the example of condom use in one cellphilm to demonstrate how a "speaking back" pedagogy can encourage reflection and participatory analysis, and contribute to deepening an understanding of how teachers might work with youth and risk in the context of HIV and AIDS.

Modification to the Monte N-Particle (MCNP) Visual Editor (MCNPVised) to read in Computer Aided Design (CAD) files

International Nuclear Information System (INIS)

Schwarz, Randy A.; Carter, Leeland L.

2004-01-01

Monte Carlo N-Particle Transport Code (MCNP) (Reference 1) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle (References 2 to 11) is recognized internationally as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant enhanced the capabilities of the MCNP Visual Editor to allow it to read in a 2D Computer Aided Design (CAD) file, allowing the user to modify and view the 2D CAD file and then electronically generate a valid MCNP input geometry with a user specified axial extent

An Empirical Study on Using Visual Embellishments in Visualization.

Science.gov (United States)

Borgo, R; Abdul-Rahman, A; Mohamed, F; Grant, P W; Reppa, I; Floridi, L; Chen, Min

2012-12-01

In written and spoken communications, figures of speech (e.g., metaphors and synecdoche) are often used as an aid to help convey abstract or less tangible concepts. However, the benefits of using rhetorical illustrations or embellishments in visualization have so far been inconclusive. In this work, we report an empirical study to evaluate hypotheses that visual embellishments may aid memorization, visual search and concept comprehension. One major departure from related experiments in the literature is that we make use of a dual-task methodology in our experiment. This design offers an abstraction of typical situations where viewers do not have their full attention focused on visualization (e.g., in meetings and lectures). The secondary task introduces "divided attention", and makes the effects of visual embellishments more observable. In addition, it also serves as additional masking in memory-based trials. The results of this study show that visual embellishments can help participants better remember the information depicted in visualization. On the other hand, visual embellishments can have a negative impact on the speed of visual search. The results show a complex pattern as to the benefits of visual embellishments in helping participants grasp key concepts from visualization.

A flow visualization study of spore release using a wind tunnel-mounted laser light sheet

International Nuclear Information System (INIS)

Davis, J.M.; Eisner, A.D.; Wiener, R.W.; Main, C.E.

1997-01-01

A phase Doppler anemometry system in combination with a laser light sheet was used in a low-speed recirculating wind tunnel to examine the flow field around an individual leaf. Turbulence similar to that encountered near the surface of the earth in a neutral stability boundary layer was generated using a grid at the upwind end of the wind tunnel test section. Individual healthy and diseased plant leaves were introduced into the tunnel with the leaf tip pointing downwind. The Mie-scattered radiation from the spores departing the diseased leaf was captured on videotape. Image processing software was used to enhance the visual quality of the individual frames from the videotape and to make spore velocity calculations. Three main vortex regions around the leaf were identified. The importance of these regions to the separation of the spores from the leaf surface and their subsequent downwind movement was analyzed

Stability of medicines after repackaging into multicompartment compliance aids: eight criteria for detection of visual alteration

OpenAIRE

Albert, Valerie; Lanz, Michael; Imanidis, Georgios; Hersberger, Kurt E.; Arnet, Isabelle

2017-01-01

Introduction Multicompartment compliance aids (MCA) are widely used by patients. They support the management of medication and reduce unintentional nonadherence. MCA are filled with medicines unpacked from their original packaging. Swiss pharmacists currently provide MCA for 1–2 weeks, although little and controversial information exists on the stability of repackaged medicines. Objective We aimed to validate the usefulness of a simple screening method capable of detecting visual stability pr...

A wearable multipoint ultrasonic travel aids for visually impaired

International Nuclear Information System (INIS)

Ercoli, Ilaria; Marchionni, Paolo; Scalise, Lorenzo

2013-01-01

In 2010, the World Health Organization estimates that there were about 285 million people in the world with disabling eyesight loss (246 millions are visually impaired (VI) and 39 millions are totally blind). For such users, hits during mobility tasks are the reason of major concerns and can reduce the quality of their life. The white cane is the primary device used by the majority of blind or VI users to explore and possibly avoid obstacles; it can monitor only the ground (< 1m) and it does not provide protection for the legs, the trunk and the head. In this paper, authors propose a novel stand-alone Electronic Travel Aid (ETA) device for obstacle detection based on multi- sensing (by 4 ultrasonic transducers) and a microcontroller. Portability, simplicity, reduced dimensions and cost are among the major pros of the reported system, which can detect and localize (angular position and distance from the user) obstacles eventually present in the volume in front of him and on the ground in front of him

Impact of oral health education by audio aids, braille and tactile models on the oral health status of visually impaired children of Bhopal City

OpenAIRE

Anjali Gautam; Ajay Bhambal; Swapnil Moghe

2018-01-01

Context: Children with special needs face unique challenges in day-to-day practice. They are dependent on their close ones for everything. To improve oral hygiene in such visually impaired children, undue training and education are required. Braille is an important language for reading and writing for the visually impaired. It helps them understand and visualize the world via touch. Audio aids are being used to impart health education to the visually impaired. Tactile models help them perceiv...

Evaluating the Performance of a Visually Guided Hearing Aid Using a Dynamic Auditory-Visual Word Congruence Task.

Science.gov (United States)

Roverud, Elin; Best, Virginia; Mason, Christine R; Streeter, Timothy; Kidd, Gerald

2017-12-15

The "visually guided hearing aid" (VGHA), consisting of a beamforming microphone array steered by eye gaze, is an experimental device being tested for effectiveness in laboratory settings. Previous studies have found that beamforming without visual steering can provide significant benefits (relative to natural binaural listening) for speech identification in spatialized speech or noise maskers when sound sources are fixed in location. The aim of the present study was to evaluate the performance of the VGHA in listening conditions in which target speech could switch locations unpredictably, requiring visual steering of the beamforming. To address this aim, the present study tested an experimental simulation of the VGHA in a newly designed dynamic auditory-visual word congruence task. Ten young normal-hearing (NH) and 11 young hearing-impaired (HI) adults participated. On each trial, three simultaneous spoken words were presented from three source positions (-30, 0, and 30 azimuth). An auditory-visual word congruence task was used in which participants indicated whether there was a match between the word printed on a screen at a location corresponding to the target source and the spoken target word presented acoustically from that location. Performance was compared for a natural binaural condition (stimuli presented using impulse responses measured on KEMAR), a simulated VGHA condition (BEAM), and a hybrid condition that combined lowpass-filtered KEMAR and highpass-filtered BEAM information (BEAMAR). In some blocks, the target remained fixed at one location across trials, and in other blocks, the target could transition in location between one trial and the next with a fixed but low probability. Large individual variability in performance was observed. There were significant benefits for the hybrid BEAMAR condition relative to the KEMAR condition on average for both NH and HI groups when the targets were fixed. Although not apparent in the averaged data, some

Copper contamination in thin stainless steel sheet

International Nuclear Information System (INIS)

Holbert, R.K. Jr.; Dobbins, A.G.; Bennett, R.K. Jr.

1986-01-01

The standard welding technique used at Oak Ridge Y-12 Plant for joining thin stainless sheet is the gas tungsten arc (GTA) welding process. One of the reoccurring problems with the sheet welds is surface cracking in the heat-affected zone (HAZ). Metallography shows that the cracks are only about 0.05 mm (0.002 in.) deep which is significant in a 0.25 mm (0.01 in.) thick sheet. Thus, welding requirements do not permit any surfacing cracking as detected by a fluorescent dye penetrant test conducted on every part after welding. Surface cracks have been found in both of the two most common weld designs in the thin sheet fabricated at the Oak Ridge Y-12 Plant. These butt joints are welded between two 0.25 mm thick stainless steel sheets and a tube with eyelet welded to a 25 mm (0.98 in.) thick sheet. The weld between the two sheets is made on a semiautomatic seam welding unit, whereas the tube-to-eyelet-to-sheet welds are done manually. The quality of both welds is very dependent on the welding procedure and the way the parts are placed in the weld fixturing. Metallographic examination has indicated that some welded parts with surface cracking in the weld region had copper particles on the surface, and the question of copper contamination has been raised. With the aid of a scanning electron microscope and an electron microprobe, the existence of copper in an around the surface cracks has been verified. The copper is on the surface of the parts prior to welding in the form of small dust particles

Considerations for the composition of visual scene displays: potential contributions of information from visual and cognitive sciences.

Science.gov (United States)

Wilkinson, Krista M; Light, Janice; Drager, Kathryn

2012-09-01

Aided augmentative and alternative (AAC) interventions have been demonstrated to facilitate a variety of communication outcomes in persons with intellectual disabilities. Most aided AAC systems rely on a visual modality. When the medium for communication is visual, it seems likely that the effectiveness of intervention depends in part on the effectiveness and efficiency with which the information presented in the display can be perceived, identified, and extracted by communicators and their partners. Understanding of visual-cognitive processing - that is, how a user attends, perceives, and makes sense of the visual information on the display - therefore seems critical to designing effective aided AAC interventions. In this Forum Note, we discuss characteristics of one particular type of aided AAC display, that is, Visual Scene Displays (VSDs) as they may relate to user visual and cognitive processing. We consider three specific ways in which bodies of knowledge drawn from the visual cognitive sciences may be relevant to the composition of VSDs, with the understanding the direct research with children with complex communication needs is necessary to verify or refute our speculations.

Impact of a visual aid on discordance between physicians and family members about prognosis of critically ill patients.

Science.gov (United States)

Burelli, Gabrielle; Berthelier, Chloé; Vanacker, Hélène; Descaillot, Léonard; Philippon-Jouve, Bénédicte; Fabre, Xavier; Kaaki, Mahmoud; Chakarian, Jean-Charles; Domine, Alexandre; Beuret, Pascal

2018-06-01

This study aimed to evaluate the impact of a visual aid on the discordance about prognosis between physicians and family members. The study was performed in a general intensive care department with two 6-bed units. In the unit A, family members could consult a visual aid depicting day by day the evolution of global, hemodynamic, respiratory, renal and neurological conditions of the patient on a 10-point scale. In the unit B, they only received oral medical information. On day 7 of the ICU stay, the physician and family members estimated the prognosis of the patient among four proposals (life threatened; steady state but may worsen; steady state, should heal; will heal). Then we compared the rate of discordance about prognosis between physicians and family members in the two units. Seventy-nine consecutive patients admitted in the intensive care department and still present at day 7, their family members and physicians, were enrolled. Patients in the two units were comparable in age, sex ratio, reason for admission, SAPS II at admission and SOFA score at day 7. In the unit A, physician-family members discordance about prognosis occurred for 12 out of 39 patients (31%) vs. 22 out of 40 patients (55%) in the unit B (P=0.04). In our study, adding a visual aid depicting the evolution of the condition of critically ill patients day by day to classic oral information allowed the family to have an estimate of the prognosis less discordant with the estimate of the physician. Copyright © 2018 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

Textile Visual Materials: Appropriate Technology in Action.

Science.gov (United States)

Donoghue, Beverly Emerson

An innovative educational medium--screenprinted visual aids on cloth--is one alternative to conventional media in Africa, where visual materials are important communication tools but conventional media and materials are often scarce. A production process for cloth visual aids was developed and evaluated in Ghana and Sudan through the…

Development of the visual inspection system for the top of the tube sheet in steam generators

International Nuclear Information System (INIS)

Kim, Gyung Sub; Choi, Sang Hoon; Kim, Ki Chul

2008-01-01

Steam Generators at Nuclear Power plants have a important function to isolate Radioactivity between the primary side radioactive fluid running through tubes and the secondary side with non-radioactive fluid through out of a tube bundle, in addition to a function of steam generation. Therefore, To obtain integrity of Steam Generator is really important for safety in the nuclear power plant. At the same time, sludge and foreign objects in steam generators are known as major sources causing the damage of SG tubes. But there is no way to prevent those coming to steam generators until now. Therefore, a periodic inspection and removal of those in steam generators is the only way for those Generally, Most of the Nuclear Power Plants have been inspecting visually every outage for the top of the tube sheet in which sludge and foreign objects lead to the buildup to know how these are

The Impact of Visuals on Nutrition and Health Education Materials

Directory of Open Access Journals (Sweden)

Emily Clyatt

2015-10-01

Full Text Available Colorado State University Extension (CSUE recently launched a new website, Live Eat Play Colorado (LEP; www.liveeatplay.colostate.edu which promotes traditional CSUE fact sheets as well as new consumer-friendly materials with dense imagery and lower reading levels. LEP has allowed for an increased use of visuals to enrich nutrition and health materials. Appealing visuals serve as tools designed to increase comprehension and memory of health topics (Frisch, Camerini, & Schultz, 2013. Information retention is higher when visuals are combined with text, as opposed to text-only information (Peregrin, 2010. Testing this idea, visuals were placed in the text-only fact sheet, “Nutrition for the Athlete” (231,424 page views in 2014. Google Analytics data revealed that read time increased 23% in the 15 months after visuals were placed compared to the 15 months prior, from an average of 5:32 to 6:50 minutes. The increased read time could suggest that readers are more engaged with information on the webpage and demonstrates the potential positive impact of visuals on web-based education materials. Educators should intentionally select images for fact sheets that will support, reinforce, and/or clarify messages on health topics.

Pediatric Ocular Manifestations of HIV/AIDS in Makurdi Benue State ...

African Journals Online (AJOL)

A retrospective study of all the children aged 1-16 years, diagnosed cases of ... Visual acuity and Ocular diagnosis of all Seropositive HIV/AIDS children reviewed. ... HIV/AIDS were the major causes of ocular morbidity and visual impairment.

The efectiveness of mnemonic audio-visual aids in teaching content words to EFL students at a Turkish university

OpenAIRE

Kılınç, A Reha

1996-01-01

Ankara : Institute of Economics and Social Sciences, Bilkent University, 1996. Thesis(Master's) -- Bilkent University, 1996. Includes bibliographical references leaves 63-67 This experimental study aimed at investigating the effects of mnemonic audio-visual aids on recognition and recall of vocabulary items in comparison to a dictionary using control group. The study was conducted at Middle East Technical University Department of Basic English. The participants were 64 beginner and u...

Comprehensive Small Engine Repair.

Science.gov (United States)

Hires, Bill; And Others

This curriculum guide contains the basic information needed to repair all two- and four-stroke cycle engines. The curriculum covers four areas, each consisting of one or more units of instruction that include performance objectives, suggested activities for teacher and students, information sheets, assignment sheets, job sheets, visual aids,…

VISA: AN AUTOMATIC AWARE AND VISUAL AIDS MECHANISM FOR IMPROVING THE CORRECT USE OF GEOSPATIAL DATA

Directory of Open Access Journals (Sweden)

J. H. Hong

2016-06-01

Full Text Available With the fast growth of internet-based sharing mechanism and OpenGIS technology, users nowadays enjoy the luxury to quickly locate and access a variety of geospatial data for the tasks at hands. While this sharing innovation tremendously expand the possibility of application and reduce the development cost, users nevertheless have to deal with all kinds of “differences” implicitly hidden behind the acquired georesources. We argue the next generation of GIS-based environment, regardless internet-based or not, must have built-in knowledge to automatically and correctly assess the fitness of data use and present the analyzed results to users in an intuitive and meaningful way. The VISA approach proposed in this paper refer to four different types of visual aids that can be respectively used for addressing analyzed results, namely, virtual layer, informative window, symbol transformation and augmented TOC. The VISA-enabled interface works in an automatic-aware fashion, where the standardized metadata serve as the known facts about the selected geospatial resources, algorithms for analyzing the differences of temporality and quality of the geospatial resources were designed and the transformation of analyzed results into visual aids were automatically executed. It successfully presents a new way for bridging the communication gaps between systems and users. GIS has been long seen as a powerful integration tool, but its achievements would be highly restricted if it fails to provide a friendly and correct working platform.

Assessing the Impact of Testing Aids on Post-Secondary Student Performance: A Meta-Analytic Investigation

Science.gov (United States)

Larwin, Karen H.; Gorman, Jennifer; Larwin, David A.

2013-01-01

Testing aids, including student-prepared testing aids (a.k.a., cheat sheets or crib notes) and open-textbook exams, are common practice in post-secondary assessment. There is a considerable amount of published research that discusses and investigates the impact of these testing aids. However, the findings of this research are contradictory and…

Computer-aided process planning in prismatic shape die components based on Standard for the Exchange of Product model data

Directory of Open Access Journals (Sweden)

Awais Ahmad Khan

2015-11-01

Full Text Available Insufficient technologies made good integration between the die components in design, process planning, and manufacturing impossible in the past few years. Nowadays, the advanced technologies based on Standard for the Exchange of Product model data are making it possible. This article discusses the three main steps for achieving the complete process planning for prismatic parts of the die components. These three steps are data extraction, feature recognition, and process planning. The proposed computer-aided process planning system works as part of an integrated system to cover the process planning of any prismatic part die component. The system is built using Visual Basic with EWDraw system for visualizing the Standard for the Exchange of Product model data file. The system works successfully and can cover any type of sheet metal die components. The case study discussed in this article is taken from a large design of progressive die.

Foreign Aid Explorer)

Data.gov (United States)

US Agency for International Development — The Foreign Aid Explorer shows the multi-dimensional picture of U.S. foreign assistance through a highly visual and interactive website. The website makes it easy...

Human corneal endothelial cell transplantation using nanocomposite gel sheet in bullous keratopathy.

Science.gov (United States)

Parikumar, Periasamy; Haraguchi, Kazutoshi; Senthilkumar, Rajappa; Abraham, Samuel Jk

2018-01-01

Transplantation of in vitro expanded human corneal endothelial precursors (HCEP) cells using a nanocomposite (D25-NC) gel sheet as supporting material in bovine's cornea has been earlier reported. Herein we report the transplantation of HCEP cells derived from a cadaver donor cornea to three patients using the NC gel sheet. In three patients with bullous keratopathy, one after cataract surgery, one after trauma and another in the corneal graft, earlier performed for congenital corneal dystrophy, not amenable to medical management HCEP cells isolated from a human cadaver donor cornea in vitro expanded using a thermoreversible gelation polymer (TGP) for 26 days were divided into three equal portions and 1.6 × 10 5 HCEP cells were injected on to the endothelium of the affected eye in each patient using the D25-NC gel sheet as a supporting material. The sheets were removed after three days. The bullae in the cornea disappeared by the 3 rd -11 th post-operative day in all the three patients. Visual acuity improved from Perception of light (PL)+/Projection of rays (PR)+ to Hand movements (HM)+ in one of the patients by post-operative day 3 which was maintained at 18 months follow-up. At 18 months follow-up, in another patient the visual acuity had improved from HM+ to 6/60 while in the third patient, visual acuity remained HM+ as it was prior to HCEP transplantation. There were no adverse effects during the follow-up in any of the patients.

An ergonomics prototype of adjustable chin stands aid for visual mechanical inspection at electronic manufacturing-based company in Kuantan, Malaysia

Science.gov (United States)

Elias, Nurainaa; Mat Yahya, Nafrizuan

2018-04-01

Chin stands aid is a device designed to reduce fatigue on the chin during the Visual Mechanical Inspection (VMI) task for operators in TT Electronic Sdn Bhd, Kuantan, Malaysia. It is also used to reduce cycle time and also improve employee well-being in terms of comfort. In this project, a 3D model of chin stands aid with an ergonomics approach is created using SOLIDWORKS software. Two different concepts were designed and the best one is chosen based on the Pugh concept selection method, concept screening and also concept scoring. After the selection of concepts is done, a prototype of chin stands aid will be developed and a simulation of the prototype is performed. The simulation has been executed by using Workbench ANSYS software as a tool. Stress analysis, deformation analysis, and fatigue analysis have been done to know the strength and lifespan of the product. The prototype also has been tested to know the functionality and also comfortability for the user to use the chin stands aid.

Low cost light-sheet microscopy for whole brain imaging

Science.gov (United States)

Kumar, Manish; Nasenbeny, Jordan; Kozorovitskiy, Yevgenia

2018-02-01

Light-sheet microscopy has evolved as an indispensable tool in imaging biological samples. It can image 3D samples at fast speed, with high-resolution optical sectioning, and with reduced photobleaching effects. These properties make light-sheet microscopy ideal for imaging fluorophores in a variety of biological samples and organisms, e.g. zebrafish, drosophila, cleared mouse brains, etc. While most commercial turnkey light-sheet systems are expensive, the existing lower cost implementations, e.g. OpenSPIM, are focused on achieving high-resolution imaging of small samples or organisms like zebrafish. In this work, we substantially reduce the cost of light-sheet microscope system while targeting to image much larger samples, i.e. cleared mouse brains, at single-cell resolution. The expensive components of a lightsheet system - excitation laser, water-immersion objectives, and translation stage - are replaced with an incoherent laser diode, dry objectives, and a custom-built Arduino-controlled translation stage. A low-cost CUBIC protocol is used to clear fixed mouse brain samples. The open-source platforms of μManager and Fiji support image acquisition, processing, and visualization. Our system can easily be extended to multi-color light-sheet microscopy.

The effect of computer-aided detection markers on visual search and reader performance during concurrent reading of CT colonography

International Nuclear Information System (INIS)

Helbren, Emma; Taylor, Stuart A.; Fanshawe, Thomas R.; Mallett, Susan; Phillips, Peter; Boone, Darren; Gale, Alastair; Altman, Douglas G.; Manning, David; Halligan, Steve

2015-01-01

We aimed to identify the effect of computer-aided detection (CAD) on visual search and performance in CT Colonography (CTC) of inexperienced and experienced readers. Fifteen endoluminal CTC examinations were recorded, each with one polyp, and two videos were generated, one with and one without a CAD mark. Forty-two readers (17 experienced, 25 inexperienced) interpreted the videos during infrared visual search recording. CAD markers and polyps were treated as regions of interest in data processing. This multi-reader, multi-case study was analysed using multilevel modelling. CAD drew readers' attention to polyps faster, accelerating identification times: median 'time to first pursuit' was 0.48 s (IQR 0.27 to 0.87 s) with CAD, versus 0.58 s (IQR 0.35 to 1.06 s) without. For inexperienced readers, CAD also held visual attention for longer. All visual search metrics used to assess visual gaze behaviour demonstrated statistically significant differences when ''with'' and ''without'' CAD were compared. A significant increase in the number of correct polyp identifications across all readers was seen with CAD (74 % without CAD, 87 % with CAD; p < 0.001). CAD significantly alters visual search and polyp identification in readers viewing three-dimensional endoluminal CTC. For polyp and CAD marker pursuit times, CAD generally exerted a larger effect on inexperienced readers. (orig.)

The effect of computer-aided detection markers on visual search and reader performance during concurrent reading of CT colonography

Energy Technology Data Exchange (ETDEWEB)

Helbren, Emma; Taylor, Stuart A. [University College London, Centre for Medical Imaging, London (United Kingdom); Fanshawe, Thomas R.; Mallett, Susan [University of Oxford, Nuffield Department of Primary Care Health Sciences, Oxford (United Kingdom); Phillips, Peter [University of Cumbria, Health and Medical Sciences Group, Lancaster (United Kingdom); Boone, Darren [Colchester Hospital University NHS Foundation Trust and Anglia University, Colchester (United Kingdom); Gale, Alastair [Loughborough University, Applied Vision Research Centre, Loughborough (United Kingdom); Altman, Douglas G. [University of Oxford, Centre for Statistics in Medicine, Oxford (United Kingdom); Manning, David [Lancaster University, Lancaster Medical School, Faculty of Health and Medicine, Lancaster (United Kingdom); Halligan, Steve [University College London, Centre for Medical Imaging, London (United Kingdom); University College Hospital, Gastrointestinal Radiology, University College London, Centre for Medical Imaging, Podium Level 2, London, NW1 2BU (United Kingdom)

2015-06-01

We aimed to identify the effect of computer-aided detection (CAD) on visual search and performance in CT Colonography (CTC) of inexperienced and experienced readers. Fifteen endoluminal CTC examinations were recorded, each with one polyp, and two videos were generated, one with and one without a CAD mark. Forty-two readers (17 experienced, 25 inexperienced) interpreted the videos during infrared visual search recording. CAD markers and polyps were treated as regions of interest in data processing. This multi-reader, multi-case study was analysed using multilevel modelling. CAD drew readers' attention to polyps faster, accelerating identification times: median 'time to first pursuit' was 0.48 s (IQR 0.27 to 0.87 s) with CAD, versus 0.58 s (IQR 0.35 to 1.06 s) without. For inexperienced readers, CAD also held visual attention for longer. All visual search metrics used to assess visual gaze behaviour demonstrated statistically significant differences when ''with'' and ''without'' CAD were compared. A significant increase in the number of correct polyp identifications across all readers was seen with CAD (74 % without CAD, 87 % with CAD; p < 0.001). CAD significantly alters visual search and polyp identification in readers viewing three-dimensional endoluminal CTC. For polyp and CAD marker pursuit times, CAD generally exerted a larger effect on inexperienced readers. (orig.)

Trends in HIV Terminology: Text Mining and Data Visualization Assessment of International AIDS Conference Abstracts Over 25 Years.

Science.gov (United States)

Dancy-Scott, Nicole; Dutcher, Gale A; Keselman, Alla; Hochstein, Colette; Copty, Christina; Ben-Senia, Diane; Rajan, Sampada; Asencio, Maria Guadalupe; Choi, Jason Jongwon

2018-05-04

The language encompassing health conditions can also influence behaviors that affect health outcomes. Few published quantitative studies have been conducted that evaluate HIV-related terminology changes over time. To expand this research, this study included an analysis of a dataset of abstracts presented at the International AIDS Conference (IAC) from 1989 to 2014. These abstracts reflect the global response to HIV over 25 years. Two powerful methodologies were used to evaluate the dataset: text mining to convert the unstructured information into structured data for analysis and data visualization to represent the data visually to assess trends. The purpose of this project was to evaluate the evolving use of HIV-related language in abstracts presented at the IAC from 1989 to 2014. Over 80,000 abstracts were obtained from the International AIDS Society and imported into a Microsoft SQL Server database for data processing and text mining analyses. A text mining module within the KNIME Analytics Platform, an open source software, was then used to mine the partially processed data to create a terminology corpus of key HIV terms. Subject matter experts grouped the terms into categories. Tableau, a data visualization software, was used to visualize the frequency metrics associated with the terms as line graphs and word clouds. The visualized dashboards were reviewed to discern changes in terminology use across IAC years. The major findings identify trends in HIV-related terminology over 25 years. The term "AIDS epidemic" was dominantly used from 1989 to 1991 and then declined in use. In contrast, use of the term "HIV epidemic" increased through 2014. Beginning in the mid-1990s, the term "treatment experienced" appeared with increasing frequency in the abstracts. Use of terms identifying individuals as "carriers or victims" of HIV rarely appeared after 2008. Use of the terms "HIV positive" and "HIV infected" peaked in the early-1990s and then declined in use. The terms

Modeling DNA structure and processes through animation and kinesthetic visualizations

Science.gov (United States)

Hager, Christine

There have been many studies regarding the effectiveness of visual aids that go beyond that of static illustrations. Many of these have been concentrated on the effectiveness of visual aids such as animations and models or even non-traditional visual aid activities like role-playing activities. This study focuses on the effectiveness of three different types of visual aids: models, animation, and a role-playing activity. Students used a modeling kit made of Styrofoam balls and toothpicks to construct nucleotides and then bond nucleotides together to form DNA. Next, students created their own animation to depict the processes of DNA replication, transcription, and translation. Finally, students worked in teams to build proteins while acting out the process of translation. Students were given a pre- and post-test that measured their knowledge and comprehension of the four topics mentioned above. Results show that there was a significant gain in the post-test scores when compared to the pre-test scores. This indicates that the incorporated visual aids were effective methods for teaching DNA structure and processes.

Reconstruction and Visualization of Fiber and Laminar Structure in the Normal Human Heart from Ex Vivo DTMRI Data

International Nuclear Information System (INIS)

Rohmer, Damien; Sitek, Arkadiusz; Gullberg, Grant T.

2006-01-01

Background--The human heart is composed of a helical network of muscle fibers. These fibers are organized to form sheets that are separated by cleavage surfaces. This complex structure of fibers and sheets is responsible for the orthotropic mechanical properties of cardiac muscle. The understanding of the configuration of the 3D fiber and sheet structure is important for modeling the mechanical and electrical properties of the heart and changes in this configuration maybe of significant importance to understand the remodeling after myocardial infarction. Methods--Anisotropic least square filtering followed by fiber and sheet tracking techniques were applied to Diffusion Tensor Magnetic Resonance Imaging (DTMRI) data of the excised human heart. The fiber configuration was visualized by using thin tubes to increase 3-dimensional visual perception of the complex structure. The sheet structures were reconstructed from the DTMRI data, obtaining surfaces that span the wall from the endo- to the epicardium. All visualizations were performed using the high-quality ray-tracing software POV-Ray. Results--The fibers are shown to lie in sheets that have concave or convex transmural structure which correspond to histological studies published in the literature. The fiber angles varied depending on the position between the epi- and endocardium. The sheets had a complex structure that depended on the location within the myocardium. In the apex region the sheets had more curvature. Conclusions--A high-quality visualization algorithm applied to demonstrated high quality DTMRI data is able to elicit the comprehension of the complex 3 dimensional structure of the fibers and sheets in the heart

Visual presentations of efficacy data in direct-to-consumer prescription drug print and television advertisements: A randomized study.

Science.gov (United States)

Sullivan, Helen W; O'Donoghue, Amie C; Aikin, Kathryn J; Chowdhury, Dhuly; Moultrie, Rebecca R; Rupert, Douglas J

2016-05-01

To determine whether visual aids help people recall quantitative efficacy information in direct-to-consumer (DTC) prescription drug advertisements, and if so, which types of visual aids are most helpful. Individuals diagnosed with high cholesterol (n=2504) were randomized to view a fictional DTC print or television advertisement with no visual aid or one of four visual aids (pie chart, bar chart, table, or pictograph) depicting drug efficacy. We measured drug efficacy and risk recall, drug perceptions and attitudes, and behavioral intentions. For print advertisements, a bar chart or table, compared with no visual aid, elicited more accurate drug efficacy recall. The bar chart was better at this than the pictograph and the table was better than the pie chart. For television advertisements, any visual aid, compared with no visual aid, elicited more accurate drug efficacy recall. The bar chart was better at this than the pictograph or the table. Visual aids depicting quantitative efficacy information in DTC print and television advertisements increased drug efficacy recall, which may help people make informed decisions about prescription drugs. Adding visual aids to DTC advertising may increase the public's knowledge of how well prescription drugs work. Published by Elsevier Ireland Ltd.

Your Most Essential Audiovisual Aid--Yourself!

Science.gov (United States)

Hamp-Lyons, Elizabeth

2012-01-01

Acknowledging that an interested and enthusiastic teacher can create excitement for students and promote learning, the author discusses how teachers can improve their appearance, and, consequently, how their students perceive them. She offers concrete suggestions on how a teacher can be both a "visual aid" and an "audio aid" in the classroom.…

HIV/AIDS in the visual arts: applying discipline-based art education (DBAE) to medical humanities.

Science.gov (United States)

Tapajos, Ricardo

2003-06-01

Health professions educators have been systematically attempting to insert the humanities into health professions curricula for over 4 decades, with various degrees of success. Among the several medical humanities, the visual arts seem particularly adequate for the teaching/learning of crucial aspects of medicine. Educational efforts in the arts require, however, a sound pedagogical philosophy of art education. Health professions educators need therefore to be aware of educational frameworks in the arts. Discipline-based art education (DBAE) is a recognised contemporary educational framework for the teaching/learning of the arts, which may be adapted to medical humanities. It is the ultimate objective of this essay to share the experience of applying this educational framework to a course in a medical curriculum. The author describes a course on the representations of HIV/AIDS in the visual arts, with explicit reference to its objectives, content, instructional features and student assessment in the light of DBAE, whose principles and characteristics are described in detail. Discipline-based art education may be applied to medical humanities courses in a medical curriculum. This essay throws light on how this structure may be particularly useful for designing other pedagogically sound art courses in health professions curricula.

Optimizing Visually-Assisted Listening Comprehension

Science.gov (United States)

Kashani, Ahmad Sabouri; Sajjadi, Samad; Sohrabi, Mohammad Reza; Younespour, Shima

2011-01-01

The fact that visual aids such as pictures or graphs can lead to greater comprehension by language learners has been well established. Nonetheless, the order of presenting visuals to listeners is left unattended. This study examined listening comprehension from a strategy of introducing visual information, either prior to or during an audio…

Design of an aid to visual inspection workstation

Science.gov (United States)

Tait, Robert; Harding, Kevin

2016-05-01

Visual Inspection is the most common means for inspecting manufactured parts for random defects such as pits, scratches, breaks, corrosion or general wear. The reason for the need for visual inspection is the very random nature of what might be a defect. Some defects may be very rare, being seen once or twice a year, but May still be critical to part performance. Because of this random and rare nature, even the most sophisticated image analysis programs have not been able to recognize all possible defects. Key to any future automation of inspection is obtaining good sample images of what might be a defect. However, most visual check take no images and consequently generate no digital data or historical record beyond a simple count. Any additional tool to captures such images must be able to do so without taking addition time. This paper outlines the design of a potential visual inspection station that would be compatible with current visual inspection methods, but afford the means for reliable digital imaging and in many cases augmented capabilities to assist the inspection. Considerations in this study included: resolution, depth of field, feature highlighting, and ease of digital capture, annotations and inspection augmentation for repeatable registration as well as operator assistance and training.

Operator aid system for Dhruva fueling machine

International Nuclear Information System (INIS)

Misra, S.M.; Ramaswamy, L.R.; Gohel, N.; Bharadwaj, G.; Ranade, M.R.; Khadilkar, M.G.

1997-01-01

Systems with significant software contents are replacing the old hardware logic systems. These systems not only are versatile but are easy to make changes in the program. Extensive use of such systems in critical real-time operation environment warrants not only excessive training on simulators, documentation but also fault tolerant system to bring the operation to a safe state in case of error. With new graphic user software interface and advancement in personal computer hardware design, the dynamic status of the physical environment can be shown on the visual display at near real time. These visual aids along with the software covering all the interlocks aids an operator in his professional work. This paper highlights the operator aid system for Dhruva fueling machine. (author). 6 refs., 1 fig

Lithology and chronology of ice-sheet fluctuations (magnetic susceptibility of cores from the western Ross Sea)

Science.gov (United States)

Jennings, Anne E.

1993-01-01

The goals of the marine geology part of WAIS include reconstructing the chronology and areal extent of ice-sheet fluctuations and understanding the climatic and oceanographic influences on ice-sheet history. As an initial step toward attaining these goals, down-core volume magnetic susceptibility (MS) logs of piston cores from three N-S transects in the western Ross Sea are compared. The core transects are within separate petrographic provinces based on analyses of till composition. The provinces are thought to reflect the previous locations of ice streams on the shelf during the last glaciation. Magnetic susceptibility is a function of magnetic mineral composition, sediment texture, and sediment density. It is applied in the western Ross Sea for two purposes: (1) to determine whether MS data differentiates the three transects (i.e., flow lines), and thus can be used to make paleodrainage reconstructions of the late Wisconsinan ice sheet; and (2) to determine whether the MS data can aid in distinguishing basal till diamictons from diamictons of glacial-marine origin and thus, aid paleoenvironmental interpretations. A comparison of the combined data of cores in each transect is presented.

Microcomputer-aided monitor for liquid hydrogen target system

International Nuclear Information System (INIS)

Kitami, T.; Watanabe, K.

1983-03-01

A microcomputer-aided monitor for a liquid hydrogen target system has been designed and tested. Various kinds of input data such as temperature, pressure, vacuum, etc. are scanned in a given time interval. Variation with time in any four items can be displayed on CRT and, if neccessary, printed out on a sheet of recording paper. (author)

The Usage of Programming Software “The Library of Electronic Visual Aids “Algebra 7-9” During Algebra Learning in 7-9 Forms.

Directory of Open Access Journals (Sweden)

V.A. Kreknin

2008-06-01

Full Text Available The Programming software “The Library of Electronic Visual Aids “Algebra 7-9” for secondary institutions was developed for the computer support of algebra classes in 7-9 forms of secondary school. The present article describes the data about its basic characteristics features and possibilities.

IMPROVED AGING PERFORMANCE OF VIRGIN EPDM ROOF-SHEETING COMPOUNDS WITH AMINE-DEVULCANIZED EPDM WEATHERSTRIP MATERIAL

NARCIS (Netherlands)

Dijkhuis, K. A. J.; Dierkes, W. K.; Noordermeer, J. W. M.; Sutanto, P.

2008-01-01

Sulfur-cured EPDM building-profile material was reclaimed in a co-rotating twin-screw extruder using hexadecylamine as reclaiming aid. This reclaim was blended with increasing amounts of a virgin EPDM roof-sheeting masterbatch and cured at temperatures allowing for a reversion-free vulcanization.

Decontamination sheet

International Nuclear Information System (INIS)

Hirose, Emiko; Kanesaki, Ken.

1995-01-01

The decontamination sheet of the present invention is formed by applying an adhesive on one surface of a polymer sheet and releasably appending a plurality of curing sheets. In addition, perforated lines are formed on the sheet, and a decontaminating agent is incorporated in the adhesive. This can reduce the number of curing operation steps when a plurality steps of operations for radiation decontamination equipments are performed, and further, the amount of wastes of the cured sheets, and operator's exposure are reduced, as well as an efficiency of the curing operation can be improved, and propagation of contamination can be prevented. (T.M.)

Are low vision aids still used six months after prescription?

NARCIS (Netherlands)

Neve, J.J.; Jorritsma, F.F.; Damkot, J.; Streefland, V.; Kooijman, A.C.; Looijestijn, P.L.; Welling, J.A.; Wildt, van der G.J.

1994-01-01

The Visual Advice Centre Eindhoven (VAC-E) is specialised in the rehabilitation of visually impaired persons with visual aids and illumination. Half a year after their last visit to the centre patients are contacted by telephone or by letter to enquire after their visual functioning and the use of

Predictive Validity And Usefulness Of Visual Scanning Task In Hiv ...

African Journals Online (AJOL)

The visual scanning task is a useful screening tool for brain damage in HIV/AIDS by inference from impairment of visual information processing and disturbances in perceptual mental strategies. There is progressive neuro-cognitive decline as the disease worsens. Keywords: brain, cognition, HIV/AIDS, predictive validity, ...

User involvement in the design and evaluation of a smart mobility aid.

Science.gov (United States)

Lacey, G; MacNamara, S

2000-01-01

This paper describes the design and evaluation of an innovative smart mobility aid for the frail visually impaired. The Personal Adaptive Mobility AID (PAM-AID) was developed to address the difficulties in personal mobility of the frail and elderly visually impaired. The paper provides an overview of the PAM-AID research at Trinity College and describes the evolutionary nature of the design process. Because there were no existing systems to guide its development, a series of prototypes was constructed and they were regularly evaluated in the field. This approach views potential users as vital contributing members of the design team and led to rapid and hopefully useful improvements in the design.

Computer-aided voice training in higher education: participants ...

African Journals Online (AJOL)

The training of performance singing in a multi lingual, multi cultural educational context presents unique problems and requires inventive teaching strategies. Computer-aided training offers objective visual feedback of the voice production that can be implemented as a teaching aid in higher education. This article reports on ...

Thin lead sheets in the decorative features in Pavia Charterhouse.

Science.gov (United States)

Colombo, Chiara; Realini, Marco; Sansonetti, Antonio; Rampazzi, Laura; Casadio, Francesca

2006-01-01

The facade of the church of the Pavia Charterhouse, built at the end of the 15th century, shows outstanding decorative features made of different stone materials, such as marbles, breccias and sandstones. Magnificent ornamental elements are made of thin lead sheets, and some marble slabs are inlaid with them. Metal elements are shaped in complex geometric and phytomorphic design, to form a Greek fret in black contrasting with the white Carrara marble. Lead pins were fixed to the back of the thin lead sheets with the aim of attaching the metal elements to the marble; in so doing the pins and the lead sheets constitute a single piece of metal. In some areas, lead elements have been lost, and they have been substituted with a black plaster, matching the colour of the metal. To the authors' knowledge, this kind of decorative technique is rare, and confirms the refinement of Renaissance Lombard architecture. This work reports on the results of an extensive survey of the white, orange and yellowish layers, which are present on the external surface of the lead. The thin lead sheets have been characterized and their state of conservation has been studied with the aid of Optical Microscopy, SEM-EDS, FTIR and Raman analyses. Lead sulphate, lead carbonates and oxides have been identified as decay products.

Materials Safety Data Sheets: the basis for control of toxic chemicals

Energy Technology Data Exchange (ETDEWEB)

Ketchen, E.E.; Porter, W.E.

1979-09-01

The Material Safety Data Sheets contained in this volume are the basis for the Toxic Chemical Control Program developed by the Industrial Hygiene Department, Health Division, ORNL. The three volumes are the update and expansion of ORNL/TM-5721 and ORNL/TM-5722 Material Safety Data Sheets: The Basis for Control of Toxic Chemicals, Volume I and Volume II. As such, they are a valuable adjunct to the data cards issued with specific chemicals. The chemicals are identified by name, stores catalog number where appropriate, and sequence numbers from the NIOSH Registry of Toxic Effects of Chemical Substances, 1977 Edition, if available. The data sheets were developed and compiled to aid in apprising the employees of hazards peculiar to the handling and/or use of specific toxic chemicals. Space limitation necessitate the use of descriptive medical terms and toxicological abbreviations. A glossary and an abbreviation list were developed to define some of those sometimes unfamiliar terms and abbreviations. The page numbers are keyed to the catalog number in the chemical stores at ORNL.

Keith Haring, Felix Gonzalez-Torres, Wolfgang Tillmans, and the AIDS Epidemic: The Use of Visual Art in a Health Humanities Course.

Science.gov (United States)

Smith, Jason A

2018-02-23

Contemporary art can be a powerful pedagogical tool in the health humanities. Students in an undergraduate course in the health humanities explore the subjective experience of illness and develop their empathy by studying three artists in the context of the AIDS epidemic: Keith Haring, Felix Gonzalez-Torres, and Wolfgang Tillmans. Using assignments based in narrative pedagogy, students expand their empathic response to pain and suffering. The role of visual art in health humanities pedagogy is discussed.

The Visual System

Medline Plus

Full Text Available ... Glossary The Visual System Your Eyes’ Natural Defenses Eye Health and Safety First Aid Tips Healthy Vision Tips Protective Eyewear Sports and Your Eyes Fun Stuff Cool Eye Tricks Links to More ...

On the role of topological complexity in spontaneous development of current sheets

Energy Technology Data Exchange (ETDEWEB)

Kumar, Sanjay; Bhattacharyya, R. [Udaipur Solar Observatory, Physical Research Laboratory, Dewali, Bari Road, Udaipur-313001 (India); Smolarkiewicz, P. K. [European Centre for Medium-Range Weather Forecasts, Reading RG2 9AX (United Kingdom)

2015-08-15

The computations presented in this work aim to asses the importance of field line interlacing on spontaneous development of current sheets. From Parker's magnetostatic theorem, such development of current sheets is inevitable in a topologically complex magnetofluid, with infinite electrical conductivity, at equilibrium. Relevant initial value problems are constructed by superposition of two untwisted component fields, each component field being represented by a pair of global magnetic flux surface. The intensity of field line interlacing is then specified by the relative amplitude of the two superposed fields. The computations are performed by varying this relative amplitude. Also to have a direct visualization of current sheet formation, we follow the evolution of flux surfaces instead of the vector magnetic field. An important finding of this paper is in the demonstration that initial field lines having intense interlacing tend to develop current sheets which are distributed throughout the computational domain with no preference for topologically favorable sites like magnetic nulls or field reversal layers. The onsets of these current sheets are attributed to favorable contortions of magnetic flux surfaces where two oppositely directed parts of the same field line or different field lines come to close proximity. However, for less intensely interlaced field lines, the simulations indicate development of current sheets at sites only where the magnetic topology is favorable. These current sheets originate as two sets of anti-parallel complimentary field lines press onto each other.

The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

Science.gov (United States)

Kösa, Temel; Karakus, Fatih

2018-01-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

Large-scale visualization system for grid environment

International Nuclear Information System (INIS)

Suzuki, Yoshio

2007-01-01

Center for Computational Science and E-systems of Japan Atomic Energy Agency (CCSE/JAEA) has been conducting R and Ds of distributed computing (grid computing) environments: Seamless Thinking Aid (STA), Information Technology Based Laboratory (ITBL) and Atomic Energy Grid InfraStructure (AEGIS). In these R and Ds, we have developed the visualization technology suitable for the distributed computing environment. As one of the visualization tools, we have developed the Parallel Support Toolkit (PST) which can execute the visualization process parallely on a computer. Now, we improve PST to be executable simultaneously on multiple heterogeneous computers using Seamless Thinking Aid Message Passing Interface (STAMPI). STAMPI, we have developed in these R and Ds, is the MPI library executable on a heterogeneous computing environment. The improvement realizes the visualization of extremely large-scale data and enables more efficient visualization processes in a distributed computing environment. (author)

Familiarity Enhances Visual Working Memory for Faces

Science.gov (United States)

Jackson, Margaret C.; Raymond, Jane E.

2008-01-01

Although it is intuitive that familiarity with complex visual objects should aid their preservation in visual working memory (WM), empirical evidence for this is lacking. This study used a conventional change-detection procedure to assess visual WM for unfamiliar and famous faces in healthy adults. Across experiments, faces were upright or…

Development of sealed sheet sources for calibration of whole-body counters

International Nuclear Information System (INIS)

Miyamoto, Mai; Ishigure, Nobuhito; Ogata, Yoshimune; Narita, Norihiko; Kawaura, Chiyo; Nakano, Takashi

2009-01-01

Whole body counters are usually calibrated with the aid of a whole body phantom assembled with simply-shaped plastic vessels that are filled with an aqueous solution of the relevant radioisotopes. Most vessel-type phantoms represent only a human body in which radioisotopes are homogeneously distributed, whereas the radioisotopes in vivo are sometimes localized to specific organs. Each set of the vessels is usually applicable only to a specific combination of radioisotopes, because the replacement of radioisotopes requires troublesome procedures. Possible leakage of the solution is another disadvantage of the vessel-type phantom. The authors are developing a new-type calibration phantom that is free from these disadvantages, in which sealed sheet sources are sandwiched between sections of a sliced anthropomorphic phantom. This paper describes a method to prepare sealed sheet sources for this calibration phantom. Instead of γ-ray emitters a pure β-ray emitter 32 P was used. This isotope is suitable for autoradiography and is easy to handle as its half-life is relatively short. An ink-jet printer was used to spread the solution of 32 P mixed with ink on a sheet of paper. The surface concentration of radioactivity was regulated by the function of color density adjustment of an image processing software. The radioisotope-printed paper was laminated for sealing. Through the measurement of surface concentration of radioactivity with a liquid scintillation counter, the autoradiographical investigation of the pattern of the radioactivity distributed on the sheet sources, the immersion test of the sealed sheet sources and the monitoring of the concentration of 32 P in air during the printing, it was demonstrated that sealed sheet sources for the calibration phantom can be prepared safely by the method described in this paper. Furthermore, by using sheet sources of 99m Tc prepared as a trial it was confirmed that discrete arrangement of sheet sources in a phantom at a

The Visual System

Medline Plus

Full Text Available ... The Visual System Your Eyes’ Natural Defenses Eye Health and Safety First Aid Tips Healthy Vision Tips ... addressed to the NEI Website Manager . Department of Health and Human Services | The National Institutes of Health | ...

The Visual System

Medline Plus

Full Text Available ... for Kids >> The Visual System Listen All About Vision About the Eye Ask a Scientist Video Series ... Eye Health and Safety First Aid Tips Healthy Vision Tips Protective Eyewear Sports and Your Eyes Fun ...

Early Holocene hydroclimate of Baffin Bay: Understanding the interplay between abrupt climate change events and ice sheet fluctuations

Science.gov (United States)

Corcoran, M. C.; Thomas, E. K.; Castañeda, I. S.; Briner, J. P.

2017-12-01

Understanding the causes of ice sheet fluctuations resulting in sea level rise is essential in today's warming climate. In high-latitude ice-sheet-proximal environments such as Baffin Bay, studying both the cause and the rate of ice sheet variability during past abrupt climate change events aids in predictions. Past climate reconstructions are used to understand ice sheet responses to changes in temperature and precipitation. The 9,300 and 8,200 yr BP events are examples of abrupt climate change events in the Baffin Bay region during which there were multiple re-advances of the Greenland and Laurentide ice sheets. High-resolution (decadal-scale) hydroclimate variability near the ice sheet margins during these abrupt climate change events is still unknown. We will generate a decadal-scale record of early Holocene temperature and precipitation using leaf wax hydrogen isotopes, δ2Hwax, from a lake sediment archive on Baffin Island, western Baffin Bay, to better understand abrupt climate change in this region. Shifts in temperature and moisture source result in changes in environmental water δ2H, which in turn is reflected in δ2Hwax, allowing for past hydroclimate to be determined from these compound-specific isotopes. The combination of terrestrial and aquatic δ2Hwax is used to determine soil evaporation and is ultimately used to reconstruct moisture variability. We will compare our results with a previous analysis of δ2Hwax and branched glycerol dialkyl glycerol tetraethers, a temperature and pH proxy, in lake sediment from western Greenland, eastern Baffin Bay, which indicates that cool and dry climate occurred in response to freshwater forcing events in the Labrador Sea. Reconstructing and comparing records on both the western and eastern sides of Baffin Bay during the early Holocene will allow for a spatial understanding of temperature and moisture balance changes during abrupt climate events, aiding in ice sheet modeling and predictions of future sea level

Electronic work sheets for nuclear equipment dimensioning according to AD-Merkblaetter

International Nuclear Information System (INIS)

Rodrigues, P.R.B.

1994-01-01

The purpose of this paper is to show the capability of Work sheet applications in solving engineering problems in a much easier way than by using languages such as Fortran, BASIC etc., once many routines that would have to be developed in these languages for printing and display on screen, just to give a few instances, are already included in the Work sheet application. It is also worth mentioning the fact the never version of the Excel, version 5,0, includes the Object-oriented language Visual Basic, thus making it possible to develop routines for customization as well as compiling interactive routines speeding up the program. (author). 2 refs, 8 figs, 2 tabs

Audio-Visual Aids for Cooperative Education and Training.

Science.gov (United States)

Botham, C. N.

Within the context of cooperative education, audiovisual aids may be used for spreading the idea of cooperatives and helping to consolidate study groups; for the continuous process of education, both formal and informal, within the cooperative movement; for constant follow up purposes; and for promoting loyalty to the movement. Detailed…

[An epidemiological study of visual disability and visual rehabilitation in Beijing].

Science.gov (United States)

Zou, Yan-hong; Ding, Ji-yuan; Peng, Hong; Shi, Ji-liang; Qu, Cheng-yi; Liu, Xi-pu

2009-12-01

To investigate the status of visual disability and the demands for visual rehabilitation services in Beijing. Five hundred and fifty-five persons with visual disability in Beijing from the Second National Survey on Disability of China were involved in this study. Their visual disability and demands for rehabilitation were evaluated. About three fourth of the visual disabled persons were over 60 years of age. Cataract, retinal and choroidal diseases, and glaucoma were the three leading causes of the visual impairment. Medical service was the number one (82.0%) demand for the persons with visual disability, although 89.4% of them had previously received some kinds of medial services. People who had received visual aid devices or rehabilitation training were 26.7% and 5.8%, respectively, while more people showed their demand for these service (36.6% and 11.9%, respectively). The demand for visual rehabilitation varied in different groups of age and severity of disability. Accessibility of high quality medical services for preventable blindness diseases should be further promoted. Public health education on visual rehabilitation is also needed.

Dense sheet Z-pinches

International Nuclear Information System (INIS)

Tetsu, Miyamoto

1999-01-01

The steady state and quasi-steady processes of infinite- and finite-width sheet z-pinches are studied. The relations corresponding to the Bennett relation and Pease-Braginskii current of cylindrical fiber z-pinches depend on a geometrical factor in the sheet z-pinches. The finite-width sheet z-pinch is approximated by a segment of infinite-width sheet z-pinch, if it is wide enough, and corresponds to a number of (width/thickness) times fiber z-pinch plasmas of the diameter that equals the sheet thickness. If the sheet current equals this number times the fiber current, the plasma created in the sheet z-pinches is as dense as in the fiber z-pinches. The total energy of plasma and magnetic field per unit mass is approximately equal in both pinches. Quasi-static transient processes are different in several aspects from the fiber z-pinch. No radiation collapse occurs in the sheet z-pinch. The stability is improved in the sheet z-pinches. The fusion criterions and the experimental arrangements to produce the sheet z-pinches are also discussed. (author)

Physiotherapy exercise programmes: are instructional exercise sheets effective?

Science.gov (United States)

Smith, Jo; Lewis, Jeremy; Prichard, Diana

2005-01-01

Effective compliance with physiotherapy exercises is only possible if patients remember the exercises accurately. The purpose of this study was to assess how well elderly in-patients remembered simple physiotherapy exercises, by comparing the ability to accurately reproduce a set of exercises in a group of patients that had received a written exercise sheet, with a group that had not. The study also aimed to investigate the relationship between memory for exercises and cognition. Sixty-four in-patients in an acute hospital were taught 3 exercises. Half of the subjects were randomised to receive exercise sheets to reinforce the teaching (Group 1). The rest of the subjects did not receive this memory aid (Group 2). Two to three days later subjects were asked to demonstrate their exercises. The accurate recall of the exercises was scored using a new assessment scale with a maximum score of 24. The mean exercise score was 17.19 for group 1 (SD = 5.91) and 16.24 for Group 2 (SD = 6.01). There was no significant difference in exercise score between groups (Mann Whitney U test p = 0.44). There was a statistically significant small positive correlation between exercise score and cognition (tau = 0.263). The study showed that older adult in-patients do not remember physiotherapy exercises effectively after a single teaching session and that their memory is not significantly improved by provision of an exercise sheet.

Fuels planning: science synthesis and integration; environmental consequences fact sheet 08: Evaluating sedimentation risks associated with fuel management

Science.gov (United States)

William Elliot; Pete Robichaud

2005-01-01

This fact sheet describes the sources of sediment in upland forest watersheds in the context of fuel management activities. It presents the dominant forest soil erosion processes, and the principles behind the new sediment delivery interface developed to aid in erosion analysis of fuel management projects.

The Visual System

Medline Plus

Full Text Available ... First Aid Tips Healthy Vision Tips Protective Eyewear Sports and Your Eyes Fun Stuff Cool Eye Tricks Links to More Information Optical Illusions Printables The Visual System Ever wonder how your eyes work? Watch this video to learn how you’re able ...

Learning Reverse Engineering and Simulation with Design Visualization

Science.gov (United States)

Hemsworth, Paul J.

2018-01-01

The Design Visualization (DV) group supports work at the Kennedy Space Center by utilizing metrology data with Computer-Aided Design (CAD) models and simulations to provide accurate visual representations that aid in decision-making. The capability to measure and simulate objects in real time helps to predict and avoid potential problems before they become expensive in addition to facilitating the planning of operations. I had the opportunity to work on existing and new models and simulations in support of DV and NASA’s Exploration Ground Systems (EGS).

Visual Impairments, "Including Blindness." NICHCY Disability Fact Sheet #13

Science.gov (United States)

National Dissemination Center for Children with Disabilities, 2012

2012-01-01

Vision is one of the five senses. Being able to see gives tremendous access to learning about the world around--people's faces and the subtleties of expression, what different things look like and how big they are, and the physical environments, including approaching hazards. When a child has a visual impairment, it is cause for immediate…

Materials safety data sheets: the basis for control of toxic chemicals

Energy Technology Data Exchange (ETDEWEB)

Bolton, N. E.; Ketchen, E. E.; Porter, W. E.; Hunt, C. L.

1977-05-01

For large industrial and research operations, maintaining reasonable control of all toxic materials used in their operations can be a formidable task. A system utilizing cards has been developed that serves a dual purpose, informing the user regarding hazards of a particular material and also facilitating appropriate workplace surveillance during its use. Selected data, including threshold limit values, routes of absorption, symptoms of exposure, chronic effects, and emergency first-aid procedures, are printed on the card. A portion of the card contains the label that the user detaches and affixes to the container. This label classifies the material according to flammability, toxicity, reactivity, and special properties on a 0 through 4 hazard rating system. This report describes the development and use of such cards, contains the associated Toxic Material Data Sheets that provide full backup data for the labels, and furnishes a glossary of biomedical terms used in the Data Sheets.

Possible contribution of ice-sheet/lithosphere interactions to past glaciological changes in Greenland

Science.gov (United States)

Alley, R. B.; Parizek, B. R.; Anandakrishnan, S.; Pollard, D.; Stevens, N. T.; Pourpoint, M.

2017-12-01

Ice-lithosphere interactions may have influenced the history of ice-sheet sensitivity to climate change. The Greenland ice sheet (GIS) is sensitive to warming, and is likely to be largely removed if subjected to relatively small additional temperature increases. The recent report (Schaefer et al., 2016, Nature) of near-complete GIS removal under modest Pleistocene forcing suggests that GIS sensitivity may be even greater than generally modeled, but lack of major Holocene retreat is more consistent with existing models. As shown by Stevens et al. (2016, JGR), peak lithospheric flexural stresses associated with ice-age GIS cycling are of the same order as dike-driving stresses in plutonic systems, and migrate over ice-age cycles. The full analysis by Stevens et al. suggests the possibility that the onset of cyclic ice-sheet loading allowed deep melt associated with the passage of the Icelandic hot spot beneath Greenland to work up though the crust to or near the base of the ice sheet, helping explain the anomalous geothermal heat fluxes observed at the head of the Northeast Greenland Ice Stream and elsewhere in the northern part of GIS. If ice-age cycling aided extraction of an existing reservoir of melted rock, then geothermal heat flux would have risen with the onset of extraction and migration, but with a subsequent fall associated with reservoir depletion. Simple parameterized flow-model simulations confirm intuition that a higher geothermal flux makes deglaciation easier, with the northern part of the ice sheet especially important. Large uncertainties remain in quantification, but we suggest the hypothesis that, following the onset of ice-age cycling, deglaciation of the GIS first became easier and then more difficult in response to feedbacks involving the ice sheet and the geological system beneath. In turn, this suggests that evidence of past deglaciation under moderate forcing is consistent with existing ice-sheet models.

6-DOF Pose Estimation of a Robotic Navigation Aid by Tracking Visual and Geometric Features.

Science.gov (United States)

Ye, Cang; Hong, Soonhac; Tamjidi, Amirhossein

2015-10-01

This paper presents a 6-DOF Pose Estimation (PE) method for a Robotic Navigation Aid (RNA) for the visually impaired. The RNA uses a single 3D camera for PE and object detection. The proposed method processes the camera's intensity and range data to estimates the camera's egomotion that is then used by an Extended Kalman Filter (EKF) as the motion model to track a set of visual features for PE. A RANSAC process is employed in the EKF to identify inliers from the visual feature correspondences between two image frames. Only the inliers are used to update the EKF's state. The EKF integrates the egomotion into the camera's pose in the world coordinate system. To retain the EKF's consistency, the distance between the camera and the floor plane (extracted from the range data) is used by the EKF as the observation of the camera's z coordinate. Experimental results demonstrate that the proposed method results in accurate pose estimates for positioning the RNA in indoor environments. Based on the PE method, a wayfinding system is developed for localization of the RNA in a home environment. The system uses the estimated pose and the floorplan to locate the RNA user in the home environment and announces the points of interest and navigational commands to the user through a speech interface. This work was motivated by the limitations of the existing navigation technology for the visually impaired. Most of the existing methods use a point/line measurement sensor for indoor object detection. Therefore, they lack capability in detecting 3D objects and positioning a blind traveler. Stereovision has been used in recent research. However, it cannot provide reliable depth data for object detection. Also, it tends to produce a lower localization accuracy because its depth measurement error quadratically increases with the true distance. This paper suggests a new approach for navigating a blind traveler. The method uses a single 3D time-of-flight camera for both 6-DOF PE and 3D object

Audio-visual training-aid for speechreading

DEFF Research Database (Denmark)

Bothe, Hans-Heinrich; Gebert, H.

2011-01-01

People with decreasing hearing ability are more dependent on alternative personal communication channels. To ‘read and understand’ visible articulatory movements of the conversation partner, as done in the process of speechreading, is one possible solution for understanding verbal statements...... on the employment of computer‐based communication aids for hearing‐impaired, deaf and deaf‐blind people [6]. This paper presents the complete system that is composed of a 3D‐facial animation with synchronized speech synthesis, a natural language dialogue unit and a student‐teacher‐training module. Due to the very...... modular structure of the software package and the centralized event manager, it is possible to add or replace specific modules when needed. The present version of our teacher‐student module uses a hierarchically structured composition of important single words and short phrases, supplemented by easy...

Time 's picturing of HIV/Aids: International perceptions of disease in ...

African Journals Online (AJOL)

doxiconic process” as suggested by Dana Cloud and that the (visual) rhetoric of HIV/Aids has many similarities to what she sees as a culture clash in the rhetoric of the (American) war on terrorism. Key Words: Time, representation of HIV/Aids, race ...

Clinical characteristics and causes of visual impairment in a low vision clinic in northern Jordan.

Science.gov (United States)

Bakkar, May M; Alzghoul, Eman A; Haddad, Mera F

2018-01-01

The aim of the study was to identify causes of visual impairment among patients attending a low vision clinic in the north of Jordan and to study the relevant demographic characteristics of these patients. The retrospective study was conducted through a review of clinical records of 135 patients who attended a low vision clinic in Irbid. Clinical characteristics of the patients were collected, including age, gender, primary cause of low vision, best corrected visual acuity, and current prescribed low vision aids. Descriptive statistics analysis using numbers and percentages were calculated to summarize categorical and nominal data. A total of 135 patients (61 [45.2%] females and 74 [54.8%] males) were recruited in the study. Mean age ± standard deviation for the study population was 24.53 ± 16.245 years; age range was 5-90 years. Of the study population, 26 patients (19.3%) had mild visual impairment, 61 patients (45.2%) had moderate visual impairment, 27 patients (20.0%) had severe visual impairment, and 21 patients (15.6%) were blind. The leading causes of visual impairment across all age groups were albinism (31.9%) and retinitis pigmentosa (RP) (18.5%). Albinism also accounted for the leading cause of visual impairment among the pediatric age group (0-15 years) while albinism, RP, and keratoconus were the primary causes of visual impairment for older patients. A total of 59 patients (43.7%) were given low vision aids either for near or distance. The only prescribed low vision aids for distances were telescopes. For near, spectacle-type low vision aid was the most commonly prescribed low vision aids. Low vision services in Jordan are still very limited. A national strategy programme to increase awareness of low vision services should be implemented, and health care policies should be enforced to cover low vision aids through the national medical insurance.

Feasibility of visual aids for risk evaluation by hospitalized patients with coronary artery disease: results from face-to-face interviews.

Science.gov (United States)

Magliano, Carlos Alberto da Silva; Monteiro, Andrea Liborio; Tura, Bernardo Rangel; Oliveira, Claudia Silvia Rocha; Rebelo, Amanda Rebeca de Oliveira; Pereira, Claudia Cristina de Aguiar

2018-01-01

Communicating information about risk and probability to patients is considered a difficult task. In this study, we aim to evaluate the use of visual aids representing perioperative mortality and long-term survival in the communication process for patients diagnosed with coronary artery disease at the National Institute of Cardiology, a Brazilian public hospital specializing in cardiology. One-on-one interviews were conducted between August 1 and November 20, 2017. Patients were asked to imagine that their doctor was seeking their input in the decision regarding which treatment represented the best option for them. Patients were required to choose between alternatives by considering only the different benefits and risks shown in each scenario, described as the proportion of patients who had died during the perioperative period and within 5 years. Each participant evaluated the same eight scenarios. We evaluated their answers in a qualitative and quantitative analysis. The main findings were that all patients verbally expressed concern about perioperative mortality and that 25% did not express concern about long-term mortality. Twelve percent considered the probabilities irrelevant on the grounds that their prognosis would depend on "God's will." Ten percent of the patients disregarded the reported likelihood of perioperative mortality, deciding to focus solely on the "chance of being cured." In the quantitative analysis, the vast majority of respondents chose the "correct" alternatives, meaning that they made consistent and rational choices. The use of visual aids to present risk attributes appeared feasible in our sample. The impact of heuristics and religious beliefs on shared health decision making needs to be explored better in future studies.

Relation between current sheets and vortex sheets in stationary incompressible MHD

Directory of Open Access Journals (Sweden)

D. H. Nickeler

2012-03-01

Full Text Available Magnetohydrodynamic configurations with strong localized current concentrations and vortices play an important role in the dissipation of energy in space and astrophysical plasma. Within this work we investigate the relation between current sheets and vortex sheets in incompressible, stationary equilibria. For this approach it is helpful that the similar mathematical structure of magnetohydrostatics and stationary incompressible hydrodynamics allows us to transform static equilibria into stationary ones. The main control function for such a transformation is the profile of the Alfvén-Mach number MA, which is always constant along magnetic field lines, but can change from one field line to another. In the case of a global constant MA, vortices and electric current concentrations are parallel. More interesting is the nonlinear case, where MA varies perpendicular to the field lines. This is a typical situation at boundary layers like the magnetopause, heliopause, the solar wind flowing around helmet streamers and at the boundary of solar coronal holes. The corresponding current and vortex sheets show in some cases also an alignment, but not in every case. For special density distributions in 2-D, it is possible to have current but no vortex sheets. In 2-D, vortex sheets of field aligned-flows can also exist without strong current sheets, taking the limit of small Alfvén Mach numbers into account. The current sheet can vanish if the Alfvén Mach number is (almost constant and the density gradient is large across some boundary layer. It should be emphasized that the used theory is not only valid for small Alfvén Mach numbers MA MA ≲ 1. Connection to other theoretical approaches and observations and physical effects in space plasmas are presented. Differences in the various aspects of theoretical investigations of current sheets and vortex sheets are given.

Decoupled illumination detection in light sheet microscopy for fast volumetric imaging

OpenAIRE

Olarte, Omar; Andilla, Jordi; Artigas García, David; Loza-Alvarez, Pablo

2015-01-01

Current microscopy demands the visualization of large three-dimensional samples with increased sensitivity, higher resolution, and faster speed. Several imaging techniques based on widefield, point-scanning, and light-sheet strategies have been designed to tackle some of these demands. Although successful, all these require the illuminated volumes to be tightly coupled with the detection optics to accomplish efficient optical sectioning. Here, we break this paradigm and produce optical sectio...

An ice sheet model validation framework for the Greenland ice sheet

Science.gov (United States)

Price, Stephen F.; Hoffman, Matthew J.; Bonin, Jennifer A.; Howat, Ian M.; Neumann, Thomas; Saba, Jack; Tezaur, Irina; Guerber, Jeffrey; Chambers, Don P.; Evans, Katherine J.; Kennedy, Joseph H.; Lenaerts, Jan; Lipscomb, William H.; Perego, Mauro; Salinger, Andrew G.; Tuminaro, Raymond S.; van den Broeke, Michiel R.; Nowicki, Sophie M. J.

2017-01-01

We propose a new ice sheet model validation framework - the Cryospheric Model Comparison Tool (CmCt) - that takes advantage of ice sheet altimetry and gravimetry observations collected over the past several decades and is applied here to modeling of the Greenland ice sheet. We use realistic simulations performed with the Community Ice Sheet Model (CISM) along with two idealized, non-dynamic models to demonstrate the framework and its use. Dynamic simulations with CISM are forced from 1991 to 2013, using combinations of reanalysis-based surface mass balance and observations of outlet glacier flux change. We propose and demonstrate qualitative and quantitative metrics for use in evaluating the different model simulations against the observations. We find that the altimetry observations used here are largely ambiguous in terms of their ability to distinguish one simulation from another. Based on basin-scale and whole-ice-sheet-scale metrics, we find that simulations using both idealized conceptual models and dynamic, numerical models provide an equally reasonable representation of the ice sheet surface (mean elevation differences of framework demonstrates that our proposed metrics can distinguish relatively better from relatively worse simulations and that dynamic ice sheet models, when appropriately initialized and forced with the right boundary conditions, demonstrate a predictive skill with respect to observed dynamic changes that have occurred on Greenland over the past few decades. An extensible design will allow for continued use of the CmCt as future altimetry, gravimetry, and other remotely sensed data become available for use in ice sheet model validation.

N-Isopropylacrylamide-co-glycidylmethacrylate as a Thermoresponsive Substrate for Corneal Endothelial Cell Sheet Engineering

Directory of Open Access Journals (Sweden)

Bernadette K. Madathil

2014-01-01

Full Text Available Endothelial keratoplasty is a recent shift in the surgical treatment of corneal endothelial dystrophies, where the dysfunctional endothelium is replaced whilst retaining the unaffected corneal layers. To overcome the limitation of donor corneal shortage, alternative use of tissue engineered constructs is being researched. Tissue constructs with intact extracellular matrix are generated using stimuli responsive polymers. In this study we evaluated the feasibility of using the thermoresponsive poly(N-isopropylacrylamide-co-glycidylmethacrylate polymer as a culture surface to harvest viable corneal endothelial cell sheets. Incubation below the lower critical solution temperature of the polymer allowed the detachment of the intact endothelial cell sheet. Phase contrast and scanning electron microscopy revealed the intact architecture, cobble stone morphology, and cell-to-cell contact in the retrieved cell sheet. Strong extracellular matrix deposition was also observed. The RT-PCR analysis confirmed functionally active endothelial cells in the cell sheet as evidenced by the positive expression of aquaporin 1, collagen IV, Na+-K+ ATPase, and FLK-1. Na+-K+ ATPase protein expression was also visualized by immunofluorescence staining. These results suggest that the in-house developed thermoresponsive culture dish is a suitable substrate for the generation of intact corneal endothelial cell sheet towards transplantation for endothelial keratoplasty.

Clinical characteristics and causes of visual impairment in a low vision clinic in northern Jordan

Directory of Open Access Journals (Sweden)

Bakkar MM

2018-04-01

Full Text Available May M Bakkar, Eman A Alzghoul, Mera F Haddad Faculty of Applied Medical Sciences, Department of Allied Medical Sciences, Jordan University of Science and Technology, Irbid, Jordan Aim: The aim of the study was to identify causes of visual impairment among patients attending a low vision clinic in the north of Jordan and to study the relevant demographic characteristics of these patients.Subjects and methods: The retrospective study was conducted through a review of clinical records of 135 patients who attended a low vision clinic in Irbid. Clinical characteristics of the patients were collected, including age, gender, primary cause of low vision, best corrected visual acuity, and current prescribed low vision aids. Descriptive statistics analysis using numbers and percentages were calculated to summarize categorical and nominal data.Results: A total of 135 patients (61 [45.2%] females and 74 [54.8%] males were recruited in the study. Mean age ± standard deviation for the study population was 24.53 ± 16.245 years; age range was 5–90 years. Of the study population, 26 patients (19.3% had mild visual impairment, 61 patients (45.2% had moderate visual impairment, 27 patients (20.0% had severe visual impairment, and 21 patients (15.6% were blind. The leading causes of visual impairment across all age groups were albinism (31.9% and retinitis pigmentosa (RP (18.5%. Albinism also accounted for the leading cause of visual impairment among the pediatric age group (0–15 years while albinism, RP, and keratoconus were the primary causes of visual impairment for older patients. A total of 59 patients (43.7% were given low vision aids either for near or distance. The only prescribed low vision aids for distances were telescopes. For near, spectacle-type low vision aid was the most commonly prescribed low vision aids.Conclusion: Low vision services in Jordan are still very limited. A national strategy programme to increase awareness of low vision

Visual Analysis of Air Traffic Data

Science.gov (United States)

Albrecht, George Hans; Pang, Alex

2012-01-01

In this paper, we present visual analysis tools to help study the impact of policy changes on air traffic congestion. The tools support visualization of time-varying air traffic density over an area of interest using different time granularity. We use this visual analysis platform to investigate how changing the aircraft separation volume can reduce congestion while maintaining key safety requirements. The same platform can also be used as a decision aid for processing requests for unmanned aerial vehicle operations.

Visual cortex in aging and Alzheimer’s disease: Changes in visual field maps and population receptive fields

Directory of Open Access Journals (Sweden)

Alyssa A. Brewer

2014-02-01

Full Text Available Although several studies have suggested that cortical alterations underlie such age-related visual deficits as decreased acuity, little is known about what changes actually occur in visual cortex during healthy aging. Two recent studies showed changes in primary visual cortex (V1 during normal aging; however, no studies have characterized the effects of aging on visual cortex beyond V1, important measurements both for understanding the aging process and for comparison to changes in age-related diseases. Similarly, there is almost no information about changes in visual cortex in Alzheimer’s disease (AD, the most common form of dementia. Because visual deficits are often reported as one of the first symptoms of AD, measurements of such changes in the visual cortex of AD patients might improve our understanding of how the visual system is affected by neurodegeneration as well as aid early detection, accurate diagnosis and timely treatment of AD. Here we use fMRI to first compare the visual field map (VFM organization and population receptive fields (pRFs between young adults and healthy aging subjects for occipital VFMs V1, V2, V3, and hV4. Healthy aging subjects do not show major VFM organizational deficits, but do have reduced surface area and increased pRF sizes in the foveal representations of V1, V2, and hV4 relative to healthy young control subjects. These measurements are consistent with behavioral deficits seen in healthy aging. We then demonstrate the feasibility and first characterization of these measurements in two patients with mild AD, which reveal potential changes in visual cortex as part of the pathophysiology of AD. Our data aid in our understanding of the changes in the visual processing pathways in normal aging and provide the foundation for future research into earlier and more definitive detection of AD.

Laminin-521 Promotes Rat Bone Marrow Mesenchymal Stem Cell Sheet Formation on Light-Induced Cell Sheet Technology

Directory of Open Access Journals (Sweden)

Zhiwei Jiang

2017-01-01

Full Text Available Rat bone marrow mesenchymal stem cell sheets (rBMSC sheets are attractive for cell-based tissue engineering. However, methods of culturing rBMSC sheets are critically limited. In order to obtain intact rBMSC sheets, a light-induced cell sheet method was used in this study. TiO2 nanodot films were coated with (TL or without (TN laminin-521. We investigated the effects of laminin-521 on rBMSCs during cell sheet culturing. The fabricated rBMSC sheets were subsequently assessed to study cell sheet viability, reattachment ability, cell sheet thickness, collagen type I deposition, and multilineage potential. The results showed that laminin-521 could promote the formation of rBMSC sheets with good viability under hyperconfluent conditions. Cell sheet thickness increased from an initial 26.7 ± 1.5 μm (day 5 up to 47.7 ± 3.0 μm (day 10. Moreover, rBMSC sheets maintained their potential of osteogenic, adipogenic, and chondrogenic differentiation. This study provides a new strategy to obtain rBMSC sheets using light-induced cell sheet technology.

Management of visual disturbances in albinism: a case report

Directory of Open Access Journals (Sweden)

Omar Rokiah

2012-09-01

Full Text Available Abstract Introduction A number of vision defects have been reported in association with albinism, such as photophobia, nystagmus and astigmatism. In many cases only prescription sunglasses are prescribed. In this report, the effectiveness of low-vision rehabilitation in albinism, which included prescription of multiple visual aids, is discussed. Case presentation We present the case of a 21-year-old Asian woman with albinism and associated vision defects. Her problems were blurring of distant vision, glare and her dissatisfaction with her current auto-focus spectacle-mounted telescope device, which she reported as being heavy as well as cosmetically unacceptable. We describe how low-vision rehabilitation using multiple visual aids, namely spectacles, special iris-tinted contact lenses with clear pupils, and bi-level telemicroscopic apparatus devices improved her quality of life. Subsequent to rehabilitation our patient is happier and continues to use the visual aids. Conclusions Contact lenses with a special iris tint and clear pupil area are useful aids to reduce the glare experienced by albinos. Bi-level telemicroscopic apparatus telemicroscopes fitted onto our patient’s prescription spectacles were cosmetically acceptable and able to improve her distance vision. As a result these low-vision rehabilitation approaches improved the quality of life of our albino patient.

Single-Molecule Light-Sheet Imaging of Suspended T Cells.

Science.gov (United States)

Ponjavic, Aleks; McColl, James; Carr, Alexander R; Santos, Ana Mafalda; Kulenkampff, Klara; Lippert, Anna; Davis, Simon J; Klenerman, David; Lee, Steven F

2018-05-08

Adaptive immune responses are initiated by triggering of the T cell receptor. Single-molecule imaging based on total internal reflection fluorescence microscopy at coverslip/basal cell interfaces is commonly used to study this process. These experiments have suggested, unexpectedly, that the diffusional behavior and organization of signaling proteins and receptors may be constrained before activation. However, it is unclear to what extent the molecular behavior and cell state is affected by the imaging conditions, i.e., by the presence of a supporting surface. In this study, we implemented single-molecule light-sheet microscopy, which enables single receptors to be directly visualized at any plane in a cell to study protein dynamics and organization in live, resting T cells. The light sheet enabled the acquisition of high-quality single-molecule fluorescence images that were comparable to those of total internal reflection fluorescence microscopy. By comparing the apical and basal surfaces of surface-contacting T cells using single-molecule light-sheet microscopy, we found that most coated-glass surfaces and supported lipid bilayers profoundly affected the diffusion of membrane proteins (T cell receptor and CD45) and that all the surfaces induced calcium influx to various degrees. Our results suggest that, when studying resting T cells, surfaces are best avoided, which we achieve here by suspending cells in agarose. Copyright © 2018. Published by Elsevier Inc.

Superfund fact sheet: The remedial program. Fact sheet

International Nuclear Information System (INIS)

1992-09-01

The fact sheet describes what various actions the EPA can take to clean up hazardous wastes sites. Explanations of how the criteria for environmental and public health risk assessment are determined and the role of state and local governments in site remediation are given. The fact sheet is one in a series providing reference information about Superfund issues and is intended for readers with no formal scientific training

Quantifying the impact on navigation performance in visually impaired: Auditory information loss versus information gain enabled through electronic travel aids.

Directory of Open Access Journals (Sweden)

Alex Kreilinger

Full Text Available This study's purpose was to analyze and quantify the impact of auditory information loss versus information gain provided by electronic travel aids (ETAs on navigation performance in people with low vision. Navigation performance of ten subjects (age: 54.9±11.2 years with visual acuities >1.0 LogMAR was assessed via the Graz Mobility Test (GMT. Subjects passed through a maze in three different modalities: 'Normal' with visual and auditory information available, 'Auditory Information Loss' with artificially reduced hearing (leaving only visual information, and 'ETA' with a vibrating ETA based on ultrasonic waves, thereby facilitating visual, auditory, and tactile information. Main performance measures comprised passage time and number of contacts. Additionally, head tracking was used to relate head movements to motion direction. When comparing 'Auditory Information Loss' to 'Normal', subjects needed significantly more time (p<0.001, made more contacts (p<0.001, had higher relative viewing angles (p = 0.002, and a higher percentage of orientation losses (p = 0.011. The only significant difference when comparing 'ETA' to 'Normal' was a reduced number of contacts (p<0.001. Our study provides objective, quantifiable measures of the impact of reduced hearing on the navigation performance in low vision subjects. Significant effects of 'Auditory Information Loss' were found for all measures; for example, passage time increased by 17.4%. These findings show that low vision subjects rely on auditory information for navigation. In contrast, the impact of the ETA was not significant but further analysis of head movements revealed two different coping strategies: half of the subjects used the ETA to increase speed, whereas the other half aimed at avoiding contacts.

Application of GRACE to the Evaluation of an Ice Flow Model of the Greenland Ice Sheet

Science.gov (United States)

Schlegel, N.; Wiese, D. N.; Watkins, M. M.; Larour, E. Y.; Box, J. E.; Fettweis, X.; van den Broeke, M. R.; Morlighem, M.; Boening, C.; Seroussi, H. L.

2014-12-01

Quantifying Greenland's future contribution to sea level rise is a challenging task and requires accurate estimates of ice flow sensitivity to climate change. Transient ice flow models are promising tools for estimating future ice sheet behavior. However, confidence in these types of future projections is low, especially because evaluation of model historical runs is so challenging due to the scarcity of continental-wide data for validation. For more than a decade, NASA's GRACE has continuously acquired time-variable measurements of the Earth's gravity field and has provided unprecedented surveillance of mass balance of the ice sheets, offering an opportunity for ice sheet model evaluation. Here, we take advantage of a new high-resolution (~300 km) monthly mascon solution for the purpose of mass balance comparison with an independent, historical ice flow model simulation using the Ice Sheet System Model (ISSM). The comparison highlights which regions of the ice sheet differ most from GRACE. Investigation of regional differences in trends and seasonal amplitudes between simulations forced with three different Regional Climate Model (RCM)-based estimates of surface mass balance (SMB) allows us to make conclusions about the relative contributions of various error sources in the model hindcast. This study constitutes the first regional comparison of GRACE data and an ice sheet model. Conclusions will aid in the improvement of RCM SMB estimates as well as ice sheet simulation estimates of present and future rates of sea level rise. This work was performed at the California Institute of Technology's Jet Propulsion Laboratory under a contract with the National Aeronautics and Space Administration's Cryosphere Program and President's and Director's Fund Program.

Manufacture of a four-sheet complex component from different titanium alloys by superplastic forming

Science.gov (United States)

Allazadeh, M. R.; Zuelli, N.

2017-10-01

A superplastic forming (SPF) technology process was deployed to form a complex component with eight-pocket from a four-sheet sandwich panel sheetstock. Six sheetstock packs were composed of two core sheets made of Ti-6Al-4V or Ti-5Al-4Cr-4Mo-2Sn-2Zr titanium alloy and two skin sheets made of Ti-6Al-4V or Ti-6Al-2Sn-4Zr-2Mo titanium alloy in three different combinations. The sheets were welded with two subsequent welding patterns over the core and skin sheets to meet the required component's details. The applied welding methods were intermittent and continuous resistance seam welding for bonding the core sheets to each other and the skin sheets over the core panel, respectively. The final component configuration was predicted based on the die drawings and finite element method (FEM) simulations for the sandwich panels. An SPF system set-up with two inlet gas pipe feeding facilitated the trials to deliver two pressure-time load cycles acting simultaneously which were extracted from FEM analysis for specific forming temperature and strain rate. The SPF pressure-time cycles were optimized via GOM scanning and visually inspecting some sections of the packs in order to assess the levels of core panel formation during the inflation process of the sheetstock. Two sets of GOM scan results were compared via GOM software to inspect the surface and internal features of the inflated multisheet packs. The results highlighted the capability of the tested SPF process to form complex components from a flat multisheet pack made of different titanium alloys.

Radiation protecting sheet

International Nuclear Information System (INIS)

Makiguchi, Hiroshi.

1989-01-01

As protection sheets used in radioactivity administration areas, a thermoplastic polyurethane composition sheet with a thickness of less 0.5 mm, solid content (ash) of less than 5% and a shore D hardness of less than 60 is used. A composite sheet with thickness of less than 0.5 mm laminated or coated with such a thermoplastic polyurethane composition as a surface layer and the thermoplastic polyurethane composition sheet applied with secondary fabrication are used. This can satisfy all of the required properties, such as draping property, abrasion resistance, high breaking strength, necking resistance, endurance strength, as well as chemical resistance and easy burnability in burning furnace. Further, by forming uneveness on the surface by means of embossing, etc. safety problems such as slippage during operation and walking can be overcome. (T.M.)

A Critique of the Theoretical and Empirical Literature of the Use of Diagrams, Graphs, and Other Visual Aids in the Learning of Scientific-Technical Content from Expository Texts and Instruction

Science.gov (United States)

Carifio, James; Perla, Rocco J.

2009-01-01

This article presents a critical review and analysis of key studies that have been done in science education and other areas on the effects and effectiveness of using diagrams, graphs, photographs, illustrations, and concept maps as "adjunct visual aids" in the learning of scientific-technical content. It also summarizes and reviews those studies…

Inter-comparison of ice sheet mass balance products from GRACE: ESA CCI Round Robin results

DEFF Research Database (Denmark)

Groth, A.; Horwath, M.; Horvath, A.

-term satellite-based data products are generated for selected ECVs. Since ice sheet mass balance is an ECV parameter of highest interest, both the AIS_cci and the GIS_cci project will provide mass balance products based on satellite gravimetry data: (a) time series of monthly mass changes for individual drainage...... basins, and (b) gridded mass changes covering the entire ice sheet.Gravimetry Mass Balance (GMB) products are derived from data acquired by the GRACE (Gravity Recovery and Climate Experiment) mission. Although GRACE data have the advantage of being directly sensitive to mass changes, their limited...... drainage basins the GMB time series are compared to independent mass balance products based on satellite altimetry and firn densification information from a regional climate model. This inter-comparison has aided the algorithm definition for the operational ECV production....

Materials safety data sheets the basis for control of toxic chemicals. Volume II

Energy Technology Data Exchange (ETDEWEB)

Bolton, N. E.; Ketchen, E. E.; Porter, W. E.; Hunt, C. L.

1977-05-01

For large industrial and research operations, maintaining reasonable control of all toxic materials used in their operations can be a formidable task. A system utilizing cards has been developed that serves a dual purpose, informing the user regarding hazards of a particular material and also facilitating appropriate workplace surveillance during its use. Selected data, including threshold limit values, routes of absorption, symptoms of exposure, chronic effects, and emergency first-aid procedures, are printed on the card. A portion of the card contains the label that the user detaches and affixes to the container. This label classifies the material according to flammability, toxicity, reactivity, and special properties on a 0 through 4 hazard rating system. This report describes the development and use of such cards, contains the associated Toxic Material Data Sheets that provide full backup data for the labels, and furnishes a glossary of biomedical terms used in the Data Sheets.

Feeling Jumpy: Teaching about HIV/AIDS

Science.gov (United States)

Lesko, Nancy; Brotman, Jennie S.; Agarwal, Ruchi; Quackenbush, Jaime Lynn

2010-01-01

Sexuality education and HIV/AIDS education are arenas of strong feelings. Emotions make sexuality and health lessons peculiar, "thrown together" lessons, and emotions stick to "childhood innocence", "growing up too fast" and even "jump" in response to visuals, say a used condom on an elementary school playground or a pregnant sophomore in a…

28 CFR 36.303 - Auxiliary aids and services.

Science.gov (United States)

2010-07-01

... materials available to individuals with hearing impairments; (2) Qualified readers, taped texts, audio recordings, Brailled materials, large print materials, or other effective methods of making visually...” includes— (1) Qualified interpreters, notetakers, computer-aided transcription services, written materials...

A framework for development of an intelligent system for design and manufacturing of stamping dies

International Nuclear Information System (INIS)

Hussein, H M A; Kumar, S

2014-01-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

A framework for development of an intelligent system for design and manufacturing of stamping dies

Science.gov (United States)

Hussein, H. M. A.; Kumar, S.

2014-07-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

Reconstruction and Visualization of Fiber and Laminar Structure inthe Normal Human Heart from Ex Vivo DTMRI Data

Energy Technology Data Exchange (ETDEWEB)

Rohmer, Damien; Sitek, Arkadiusz; Gullberg, Grant T.

2006-12-18

Background - The human heart is composed of a helicalnetwork of muscle fibers. These fibers are organized to form sheets thatare separated by cleavage surfaces. This complex structure of fibers andsheets is responsible for the orthotropic mechanical properties ofcardiac muscle. The understanding of the configuration of the 3D fiberand sheet structure is important for modeling the mechanical andelectrical properties of the heart and changes in this configuration maybe of significant importance to understand the remodeling aftermyocardial infarction.Methods - Anisotropic least square filteringfollowed by fiber and sheet tracking techniques were applied to DiffusionTensor Magnetic Resonance Imaging (DTMRI) data of the excised humanheart. The fiber configuration was visualized by using thin tubes toincrease 3-dimensional visual perception of the complex structure. Thesheet structures were reconstructed from the DTMRI data, obtainingsurfaces that span the wall from the endo- to the epicardium. Allvisualizations were performed using the high-quality ray-tracing softwarePOV-Ray. Results - The fibers are shown to lie in sheets that haveconcave or convex transmural structure which correspond to histologicalstudies published in the literature. The fiber angles varied depending onthe position between the epi- and endocardium. The sheets had a complexstructure that depended on the location within the myocardium. In theapex region the sheets had more curvature. Conclusions - A high-qualityvisualization algorithm applied to demonstrated high quality DTMRI datais able to elicit the comprehension of the complex 3 dimensionalstructure of the fibers and sheets in the heart.

Use of optical aids by visually impaired students: social and cultural factors Uso de auxílios ópticos por escolares com deficiência visual: fatores socioculturais

Directory of Open Access Journals (Sweden)

Gelse Beatriz Martins Monteiro

2006-08-01

Full Text Available PURPOSE: To identify conceptions, social and cultural factors regarding the use of optical aids by visually impaired students and to present information to health and educational professionals. METHODS: Qualitative research using spontaneous theater (interactive theater modality based on improvisation as research instrument. To analyze data, an adapted form of the collective subject discourse technique - procedures for organization of verbal data - was applied. Scenes, gestures, expressions, silences and behaviors were added to the original proposal. The study population included all visually impaired students from elementary public schools, aged 10 to 14 years who attended a resource room in a São Paulo state city. The students were examined at a university low vision service. RESULTS: Little knowledge about the impairment and difficult adaptation to use of optical aids were identified. The students' behavior showed denial of own problems, discomfort on public use of aids and lack of participation in own health decisions. CONCLUSION: Analysis through spontaneous theater session allows the professional to gather information which is not possible to acquire in the health assistance atmosphere. Needs, difficulties and barriers the users found before the prescribed treatment were identified.OBJETIVO: Identificar concepções e verificar aspectos socioculturais a respeito do uso de auxílios ópticos por escolares deficientes visuais e oferecer informações a profissionais das áreas de saúde e educacional. MÉTODOS: Utilizou-se pesquisa qualitativa mediante aplicação da técnica do teatro espontâneo - modalidade de teatro interativo, de improviso, construído a partir de histórias contadas pelos participantes. Para análise das informações colhidas, foi adaptada a técnica de análise do discurso do sujeito coletivo, conjunto de procedimentos de organização de dados discursivos de natureza verbal. Por se tratar de técnica psicodram

Automobile sheet metal part production with incremental sheet forming

Directory of Open Access Journals (Sweden)

İsmail DURGUN

2016-02-01

Full Text Available Nowadays, effect of global warming is increasing drastically so it leads to increased interest on energy efficiency and sustainable production methods. As a result of adverse conditions, national and international project platforms, OEMs (Original Equipment Manufacturers, SMEs (Small and Mid-size Manufacturers perform many studies or improve existing methodologies in scope of advanced manufacturing techniques. In this study, advanced manufacturing and sustainable production method "Incremental Sheet Metal Forming (ISF" was used for sheet metal forming process. A vehicle fender was manufactured with or without die by using different toolpath strategies and die sets. At the end of the study, Results have been investigated under the influence of method and parameters used.Keywords: Template incremental sheet metal, Metal forming

3D imaging of cleared human skin biopsies using light-sheet microscopy: A new way to visualize in-depth skin structure.

Science.gov (United States)

Abadie, S; Jardet, C; Colombelli, J; Chaput, B; David, A; Grolleau, J-L; Bedos, P; Lobjois, V; Descargues, P; Rouquette, J

2018-05-01

Human skin is composed of the superimposition of tissue layers of various thicknesses and components. Histological staining of skin sections is the benchmark approach to analyse the organization and integrity of human skin biopsies; however, this approach does not allow 3D tissue visualization. Alternatively, confocal or two-photon microscopy is an effective approach to perform fluorescent-based 3D imaging. However, owing to light scattering, these methods display limited light penetration in depth. The objectives of this study were therefore to combine optical clearing and light-sheet fluorescence microscopy (LSFM) to perform in-depth optical sectioning of 5 mm-thick human skin biopsies and generate 3D images of entire human skin biopsies. A benzyl alcohol and benzyl benzoate solution was used to successfully optically clear entire formalin fixed human skin biopsies, making them transparent. In-depth optical sectioning was performed with LSFM on the basis of tissue-autofluorescence observations. 3D image analysis of optical sections generated with LSFM was performed by using the Amira ® software. This new approach allowed us to observe in situ the different layers and compartments of human skin, such as the stratum corneum, the dermis and epidermal appendages. With this approach, we easily performed 3D reconstruction to visualise an entire human skin biopsy. Finally, we demonstrated that this method is useful to visualise and quantify histological anomalies, such as epidermal hyperplasia. The combination of optical clearing and LSFM has new applications in dermatology and dermatological research by allowing 3D visualization and analysis of whole human skin biopsies. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Real-Time Monitoring and Evaluation of a Visual-Based Cervical Cancer Screening Program Using a Decision Support Job Aid

Directory of Open Access Journals (Sweden)

Curtis W. Peterson

2016-05-01

Full Text Available In many developing nations, cervical cancer screening is done by visual inspection with acetic acid (VIA. Monitoring and evaluation (M&E of such screening programs is challenging. An enhanced visual assessment (EVA system was developed to augment VIA procedures in low-resource settings. The EVA System consists of a mobile colposcope built around a smartphone, and an online image portal for storing and annotating images. A smartphone app is used to control the mobile colposcope, and upload pictures to the image portal. In this paper, a new app feature that documents clinical decisions using an integrated job aid was deployed in a cervical cancer screening camp in Kenya. Six organizations conducting VIA used the EVA System to screen 824 patients over the course of a week, and providers recorded their diagnoses and treatments in the application. Real-time aggregated statistics were broadcast on a public website. Screening organizations were able to assess the number of patients screened, alongside treatment rates, and the patients who tested positive and required treatment in real time, which allowed them to make adjustments as needed. The real-time M&E enabled by “smart” diagnostic medical devices holds promise for broader use in screening programs in low-resource settings.

Real-Time Monitoring and Evaluation of a Visual-Based Cervical Cancer Screening Program Using a Decision Support Job Aid.

Science.gov (United States)

Peterson, Curtis W; Rose, Donny; Mink, Jonah; Levitz, David

2016-05-16

In many developing nations, cervical cancer screening is done by visual inspection with acetic acid (VIA). Monitoring and evaluation (M&E) of such screening programs is challenging. An enhanced visual assessment (EVA) system was developed to augment VIA procedures in low-resource settings. The EVA System consists of a mobile colposcope built around a smartphone, and an online image portal for storing and annotating images. A smartphone app is used to control the mobile colposcope, and upload pictures to the image portal. In this paper, a new app feature that documents clinical decisions using an integrated job aid was deployed in a cervical cancer screening camp in Kenya. Six organizations conducting VIA used the EVA System to screen 824 patients over the course of a week, and providers recorded their diagnoses and treatments in the application. Real-time aggregated statistics were broadcast on a public website. Screening organizations were able to assess the number of patients screened, alongside treatment rates, and the patients who tested positive and required treatment in real time, which allowed them to make adjustments as needed. The real-time M&E enabled by "smart" diagnostic medical devices holds promise for broader use in screening programs in low-resource settings.

Bridging Redox Species-Coated Graphene Oxide Sheets to Electrode for Extending Battery Life Using Nanocomposite Electrolyte.

Science.gov (United States)

Huang, Yi Fu; Ruan, Wen Hong; Lin, Dong Ling; Zhang, Ming Qiu

2017-01-11

Substituting conventional electrolyte for redox electrolyte has provided a new intriguing method for extending battery life. The efficiency of utilizing the contained redox species (RS) in the redox electrolyte can benefit from increasing the specific surface area of battery electrodes from the electrode side of the electrode-electrolyte interface, but is not limited to that. Herein, a new strategy using nanocomposite electrolyte is proposed to enlarge the interface with the aid of nanoinclusions from the electrolyte side. To do this, graphene oxide (GO) sheets are first dispersed in the electrolyte solution of tungstosilicic salt/lithium sulfate/poly(vinyl alcohol) (SiWLi/Li 2 SO 4 /PVA), and then the sheets are bridged to electrode, after casting and evaporating the solution on the electrode surface. By applying in situ conductive atomic force microscopy and Raman spectra, it is confirmed that the GO sheets doped with RS of SiWLi/Li 2 SO 4 can be bridged and electrically reduced as an extended electrode-electrolyte interface. As a result, the RS-coated GO sheets bridged to LiTi 2 (PO 4 ) 3 //LiMn 2 O 4 battery electrodes are found to deliver extra energy capacity (∼30 mAh/g) with excellent electrochemical cycling stability, which successfully extends the battery life by over 50%.

Toward a New Theory for Selecting Instructional Visuals.

Science.gov (United States)

Croft, Richard S.; Burton, John K.

This paper provides a rationale for the selection of illustrations and visual aids for the classroom. The theories that describe the processing of visuals are dual coding theory and cue summation theory. Concept attainment theory offers a basis for selecting which cues are relevant for any learning task which includes a component of identification…

Geometry of thin liquid sheet flows

Science.gov (United States)

Chubb, Donald L.; Calfo, Frederick D.; Mcconley, Marc W.; Mcmaster, Matthew S.; Afjeh, Abdollah A.

1994-01-01

Incompresible, thin sheet flows have been of research interest for many years. Those studies were mainly concerned with the stability of the flow in a surrounding gas. Squire was the first to carry out a linear, invicid stability analysis of sheet flow in air and compare the results with experiment. Dombrowski and Fraser did an experimental study of the disintegration of sheet flows using several viscous liquids. They also detected the formulation of holes in their sheet flows. Hagerty and Shea carried out an inviscid stability analysis and calculated growth rates with experimental values. They compared their calculated growth rates with experimental values. Taylor studied extensively the stability of thin liquid sheets both theoretically and experimentally. He showed that thin sheets in a vacuum are stable. Brown experimentally investigated thin liquid sheet flows as a method of application of thin films. Clark and Dumbrowski carried out second-order stability analysis for invicid sheet flows. Lin introduced viscosity into the linear stability analysis of thin sheet flows in a vacuum. Mansour and Chigier conducted an experimental study of the breakup of a sheet flow surrounded by high-speed air. Lin et al. did a linear stability analysis that included viscosity and a surrounding gas. Rangel and Sirignano carried out both a linear and nonlinear invisid stability analysis that applies for any density ratio between the sheet liquid and the surrounding gas. Now there is renewed interest in sheet flows because of their possible application as low mass radiating surfaces. The objective of this study is to investigate the fluid dynamics of sheet flows that are of interest for a space radiator system. Analytical expressions that govern the sheet geometry are compared with experimental results. Since a space radiator will operate in a vacuum, the analysis does not include any drag force on the sheet flow.

Methodologies for analysis of patterning in the mouse RPE sheet

Science.gov (United States)

Boatright, Jeffrey H.; Dalal, Nupur; Chrenek, Micah A.; Gardner, Christopher; Ziesel, Alison; Jiang, Yi; Grossniklaus, Hans E.

2015-01-01

-analyzed results were compared. Whether tallied manually or automatically with software, the resulting cell measurements were in close agreement. We compared normal with diseased RPE cells during aging with quantitative cell size and shape metrics. Subtle differences between the RPE sheet characteristics of young and old mice were identified. The IRBP−/− mouse RPE sheet did not differ from C57BL/6J (wild type, WT), suggesting that IRBP does not play a direct role in maintaining the health of the RPE cell, while the slow loss of photoreceptor (PhR) cells previously established in this knockout does support a role in the maintenance of PhR cells. Rd8 mice exhibited several measurable changes in patterns of RPE cells compared to WT, suggesting a slow degeneration of the RPE sheet that had not been previously noticed in rd8. Conclusions An optimized dissection method and a series of programs were used to establish a rapid and hands-off analysis. The software-aided, high-sampling-size approach performed as well as trained human scorers, but was considerably faster and easier. This method allows tens to hundreds of thousands of cells to be analyzed, each with 23 metrics. With this combination of dissection and image analysis of the RPE sheet, we can now analyze cell-to-cell interactions of immediate neighbors. In the future, we may be able to observe interactions of second, third, or higher ring neighbors and analyze tension in sheets, which might be expected to deviate from normal near large bumps in the RPE sheet caused by druse or when large frank holes in the RPE sheet are observed in geographic atrophy. This method and software can be readily applied to other aspects of vision science, neuroscience, and epithelial biology where patterns may exist in a sheet or surface of cells. PMID:25593512

A questionary for assessment of visual needs and wishes

NARCIS (Netherlands)

Jorritsma, F.F.; Neve, J.J.; Kinds, G.F.; Kooijman, A.C.; Looijestijn, P.L.; Welling, J.A.; Wildt, van der G.J.

1994-01-01

The Visual Advice Centre Eindhoven (V AC-E) provides the partially sighted with advice and prescriptions for low vision aids and illumination. As a first step an assessment interview is held. The visual problems of the patient are inquired and the demands for help defined. The assessment interview

Hearing aid fitting for visual and hearing impaired patients with Usher syndrome type IIa.

Science.gov (United States)

Hartel, B P; Agterberg, M J H; Snik, A F; Kunst, H P M; van Opstal, A J; Bosman, A J; Pennings, R J E

2017-08-01

Usher syndrome is the leading cause of hereditary deaf-blindness. Most patients with Usher syndrome type IIa start using hearing aids from a young age. A serious complaint refers to interference between sound localisation abilities and adaptive sound processing (compression), as present in today's hearing aids. The aim of this study was to investigate the effect of advanced signal processing on binaural hearing, including sound localisation. In this prospective study, patients were fitted with hearing aids with a nonlinear (compression) and linear amplification programs. Data logging was used to objectively evaluate the use of either program. Performance was evaluated with a speech-in-noise test, a sound localisation test and two questionnaires focussing on self-reported benefit. Data logging confirmed that the reported use of hearing aids was high. The linear program was used significantly more often (average use: 77%) than the nonlinear program (average use: 17%). The results for speech intelligibility in noise and sound localisation did not show a significant difference between type of amplification. However, the self-reported outcomes showed higher scores on 'ease of communication' and overall benefit, and significant lower scores on disability for the new hearing aids when compared to their previous hearing aids with compression amplification. Patients with Usher syndrome type IIa prefer a linear amplification over nonlinear amplification when fitted with novel hearing aids. Apart from a significantly higher logged use, no difference in speech in noise and sound localisation was observed between linear and nonlinear amplification with the currently used tests. Further research is needed to evaluate the reasons behind the preference for the linear settings. © 2016 The Authors. Clinical Otolaryngology Published by John Wiley & Sons Ltd.

Trellis plots as visual aids for analyzing split plot experiments

DEFF Research Database (Denmark)

Kulahci, Murat; Menon, Anil

2017-01-01

The analysis of split plot experiments can be challenging due to a complicated error structure resulting from restrictions on complete randomization. Similarly, standard visualization methods do not provide the insight practitioners desire to understand the data, think of explanations, generate...... hypotheses, build models, or decide on next steps. This article demonstrates the effective use of trellis plots in the preliminary data analysis for split plot experiments to address this problem. Trellis displays help to visualize multivariate data by allowing for conditioning in a general way. They can...

Structurally Oriented Nano-Sheets in Co Thin Films: Changing Their Anisotropic Physical Properties by Thermally-Induced Relaxation.

Science.gov (United States)

Vergara, José; Favieres, Cristina; Magén, César; de Teresa, José María; Ibarra, Manuel Ricardo; Madurga, Vicente

2017-12-05

We show how nanocrystalline Co films formed by separated oblique nano-sheets display anisotropy in their resistivity, magnetization process, surface nano-morphology and optical transmission. After performing a heat treatment at 270 °C, these anisotropies decrease. This loss has been monitored measuring the resistivity as a function of temperature. The resistivity measured parallel to the direction of the nano-sheets has been constant up to 270 °C, but it decreases when measured perpendicular to the nano-sheets. This suggests the existence of a structural relaxation, which produces the change of the Co nano-sheets during annealing. The changes in the nano-morphology and the local chemical composition of the films at the nanoscale after heating above 270 °C have been analysed by scanning transmission electron microscopy (STEM). Thus, an approach and coalescence of the nano-sheets have been directly visualized. The spectrum of activation energies of this structural relaxation has indicated that the coalescence of the nano-sheets has taken place between 1.2 and 1.7 eV. In addition, an increase in the size of the nano-crystals has occurred in the samples annealed at 400 °C. This study may be relevant for the application in devices working, for example, in the GHz range and to achieve the retention of the anisotropy of these films at higher temperatures.

Structurally Oriented Nano-Sheets in Co Thin Films: Changing Their Anisotropic Physical Properties by Thermally-Induced Relaxation

Directory of Open Access Journals (Sweden)

José Vergara

2017-12-01

Full Text Available We show how nanocrystalline Co films formed by separated oblique nano-sheets display anisotropy in their resistivity, magnetization process, surface nano-morphology and optical transmission. After performing a heat treatment at 270 °C, these anisotropies decrease. This loss has been monitored measuring the resistivity as a function of temperature. The resistivity measured parallel to the direction of the nano-sheets has been constant up to 270 °C, but it decreases when measured perpendicular to the nano-sheets. This suggests the existence of a structural relaxation, which produces the change of the Co nano-sheets during annealing. The changes in the nano-morphology and the local chemical composition of the films at the nanoscale after heating above 270 °C have been analysed by scanning transmission electron microscopy (STEM. Thus, an approach and coalescence of the nano-sheets have been directly visualized. The spectrum of activation energies of this structural relaxation has indicated that the coalescence of the nano-sheets has taken place between 1.2 and 1.7 eV. In addition, an increase in the size of the nano-crystals has occurred in the samples annealed at 400 °C. This study may be relevant for the application in devices working, for example, in the GHz range and to achieve the retention of the anisotropy of these films at higher temperatures.

Variation simulation for compliant sheet metal assemblies with applications

Science.gov (United States)

Long, Yufeng

Sheet metals are widely used in discrete products, such as automobiles, aircraft, furniture and electronics appliances, due to their good manufacturability and low cost. A typical automotive body assembly consists of more than 300 parts welded together in more than 200 assembly fixture stations. Such an assembly system is usually quite complex, and takes a long time to develop. As the automotive customer demands products of increasing quality in a shorter time, engineers in automotive industry turn to computer-aided engineering (CAE) tools for help. Computers are an invaluable resource for engineers, not only to simplify and automate the design process, but also to share design specifications with manufacturing groups so that production systems can be tooled up quickly and efficiently. Therefore, it is beneficial to develop computerized simulation and evaluation tools for development of automotive body assembly systems. It is a well-known fact that assembly architectures (joints, fixtures, and assembly lines) have a profound impact on dimensional quality of compliant sheet metal assemblies. To evaluate sheet metal assembly architectures, a special dimensional analysis tool need be developed for predicting dimensional variation of the assembly. Then, the corresponding systematic tools can be established to help engineers select the assembly architectures. In this dissertation, a unified variation model is developed to predict variation in compliant sheet metal assemblies by considering fixture-induced rigid-body motion, deformation and springback. Based on the unified variation model, variation propagation models in multiple assembly stations with various configurations are established. To evaluate the dimensional capability of assembly architectures, quantitative indices are proposed based on the sensitivity matrix, which are independent of the variation level of the process. Examples are given to demonstrate their applications in selecting robust assembly

On automatic visual inspection of reflective surfaces

DEFF Research Database (Denmark)

Kulmann, Lionel

1995-01-01

surfaces, providing new and exciting applications subject to automated visual inspection. Several contextual features have been surveyed along with introduction of novel methods to perform data-dependent enhancement of local surface appearance . Morphological methods have been described and utilized......This thesis descrbes different methods to perform automatic visual inspection of reflective manufactured products, with the aim of increasing productivity, reduce cost and improve the quality level of the production. We investigate two different systems performing automatic visual inspection....... The first is the inspection of highly reflective aluminum sheets, used by the Danish company Bang & Olufsen, as a part of the exterior design and general appearance of their audio and video products. The second is the inspection of IBM hard disk read/write heads for defects during manufacturing. We have...

Best Management Practice, Fact Sheet 2. Sheet Flow to Open Space

OpenAIRE

Sample, David; Doumar, Lia

2013-01-01

This publication explains what sheet flow to open space is, where and how it is used, their limitations, routine and nonroutine maintenance, expected costs, and a glossary of terms. This fact sheet is one of a 15-part series on urban stormwater management practices.

Communicating projected survival with treatments for chronic kidney disease: patient comprehension and perspectives on visual aids.

Science.gov (United States)

Dowen, Frances; Sidhu, Karishma; Broadbent, Elizabeth; Pilmore, Helen

2017-09-21

Mortality in end stage renal disease (ESRD) is higher than many malignancies. There is no data about the optimal way to present information about projected survival to patients with ESRD. In other areas, graphs have been shown to be more easily understood than narrative. We examined patient comprehension and perspectives on graphs in communicating projected survival in chronic kidney disease (CKD). One hundred seventy-seven patients with CKD were shown 4 different graphs presenting post transplantation survival data. Patients were asked to interpret a Kaplan Meier curve, pie chart, histogram and pictograph and answer a multi-choice question to determine understanding. We measured interpretation, usefulness and preference for the graphs. Most patients correctly interpreted the graphs. There was asignificant difference in the percentage of correct answers when comparing different graph types (p = 0.0439). The pictograph was correctly interpreted by 81% of participants, the histogram by 79%, pie chart by 77% and Kaplan Meier by 69%. Correct interpretation of the histogram was associated with educational level (p = 0.008) and inversely associated with age > 65 (p = 0.008). Of those who interpreted all four graphs correctly, there was an association with employment (p = 0.001) and New Zealand European ethnicity (p = 0.002). 87% of patients found the graphs useful. The pie chart was the most preferred graph (p 0.002). The readability of the graphs may have been improved with an alternative colour choice, especially in the setting of visual impairment. Visual aids, can be beneficial adjuncts to discussing survival in CKD.

High-throughput isotropic mapping of whole mouse brain using multi-view light-sheet microscopy

Science.gov (United States)

Nie, Jun; Li, Yusha; Zhao, Fang; Ping, Junyu; Liu, Sa; Yu, Tingting; Zhu, Dan; Fei, Peng

2018-02-01

Light-sheet fluorescence microscopy (LSFM) uses an additional laser-sheet to illuminate selective planes of the sample, thereby enabling three-dimensional imaging at high spatial-temporal resolution. These advantages make LSFM a promising tool for high-quality brain visualization. However, even by the use of LSFM, the spatial resolution remains insufficient to resolve the neural structures across a mesoscale whole mouse brain in three dimensions. At the same time, the thick-tissue scattering prevents a clear observation from the deep of brain. Here we use multi-view LSFM strategy to solve this challenge, surpassing the resolution limit of standard light-sheet microscope under a large field-of-view (FOV). As demonstrated by the imaging of optically-cleared mouse brain labelled with thy1-GFP, we achieve a brain-wide, isotropic cellular resolution of 3μm. Besides the resolution enhancement, multi-view braining imaging can also recover complete signals from deep tissue scattering and attenuation. The identification of long distance neural projections across encephalic regions can be identified and annotated as a result.

Charting Monosynaptic Connectivity Maps by Two-Color Light-Sheet Fluorescence Microscopy

Directory of Open Access Journals (Sweden)

Christian J. Niedworok

2012-11-01

Full Text Available Cellular resolution three-dimensional (3D visualization of defined, fluorescently labeled long-range neuronal networks in the uncut adult mouse brain has been elusive. Here, a virus-based strategy is described that allowed fluorescent labeling of centrifugally projecting neuronal populations in the ventral forebrain and their directly, monosynaptically connected bulbar interneurons upon a single stereotaxic injection into select neuronal populations. Implementation of improved tissue clearing combined with light-sheet fluorescence microscopy permitted imaging of the resulting connectivity maps in a single whole-brain scan. Subsequent 3D reconstructions revealed the exact distribution of the diverse neuronal ensembles monosynaptically connected with distinct bulbar interneuron populations. Moreover, rehydratation of brains after light-sheet fluorescence imaging enabled the immunohistochemical identification of synaptically connected neurons. Thus, this study describes a method for identifying monosynaptic connectivity maps from distinct, virally labeled neuronal populations that helps in better understanding of information flow in neural systems.

Carbon sheet pumping

International Nuclear Information System (INIS)

Ohyabu, N.; Sagara, A.; Kawamura, T.; Motojima, O.; Ono, T.

1993-07-01

A new hydrogen pumping scheme has been proposed which controls recycling of the particles for significant improvement of the energy confinement in toroidal magnetic fusion devices. In this scheme, a part of the vacuum vessel surface near the divertor is covered with carbon sheets of a large surface area. Before discharge initiation, the sheets are baked up to 700 ∼ 1000degC to remove the previously trapped hydrogen atoms. After being cooled down to below ∼ 200degC, the unsaturated carbon sheets trap high energy charge exchange hydrogen atoms effectively during a discharge and overall pumping efficiency can be as high as ∼ 50 %. (author)

Fuels planning: science synthesis and integration; social issues fact sheet 14: Landscape preference in forested ecosystems

Science.gov (United States)

Christine Esposito

2006-01-01

It is important to understand what types of landscape settings most people prefer to be able to plan fuels treatment and other forest management activities that will be acceptable to the general public. This fact sheet considers the four common elements of visually preferred forest settings: large trees; herbacious, smooth groundcover; open midstory canopy; and vistas...

Cell sheet engineering: a unique nanotechnology for scaffold-free tissue reconstruction with clinical applications in regenerative medicine.

Science.gov (United States)

Elloumi-Hannachi, I; Yamato, M; Okano, T

2010-01-01

Cell sheet technology (CST) is based on the use of thermoresponsive polymers, poly(N-isopropylacrylamide) (PIPAAm). The surface of PIPAAms is formulated in such a way as to make its typical thickness <100 nm. In this review, we first focus on how the methods of PIPAAm-grafted surface preparations and functionalization are important to be able to harvest a functional cell sheet, to be further transplanted. Then, we present aspects of tissue mimics and three-dimensional reconstruction of a tissue in vitro. Finally, we give an overview of clinical applications and clinically relevant animal experimentations of the technology, such as cardiomyopathy, visual acuity, periodonty, oesophageal ulcerations and type 1 diabetes.

FDTD modeling of thin impedance sheets

Science.gov (United States)

Luebbers, Raymond J.; Kunz, Karl S.

1991-01-01

Thin sheets of resistive or dielectric material are commonly encountered in radar cross section calculations. Analysis of such sheets is simplified by using sheet impedances. In this paper it is shown that sheet impedances can be modeled easily and accurately using Finite Difference Time Domain (FDTD) methods.

Development of reactor design aid tool using virtual reality technology

International Nuclear Information System (INIS)

Mizuguchi, N.; Tamura, Y.; Imagawa, S.; Sagara, A.; Hayashi, T.

2006-01-01

A new type of aid system for fusion reactor design, to which the virtual reality (VR) visualization and sonification techniques are applied, is developed. This system provides us with an intuitive interaction environment in the VR space between the observer and the designed objects constructed by the conventional 3D computer-aided design (CAD) system. We have applied the design aid tool to the heliotron-type fusion reactor design activity FFHR2m [A. Sagara, S. Imagawa, O. Mitarai, T. Dolan, T. Tanaka, Y. Kubota, et al., Improved structure and long -life blanket concepts for heliotron reactors, Nucl. Fusion 45 (2005) 258-263] on the virtual reality system CompleXcope [Y. Tamura, A. Kageyama, T. Sato, S. Fujiwara, H. Nakamura, Virtual reality system to visualize and auralize numerical imulation data, Comp. Phys. Comm. 142 (2001) 227-230] of the National Institute for Fusion Science, Japan, and have evaluated its performance. The tool includes the functions of transfer of the observer, translation and scaling of the objects, recording of the operations and the check of interference

Attitude of Niger Delta university undergraduates towards HIV/AIDS

African Journals Online (AJOL)

Emeka Egbochuku

that undergraduates had a positive attitude towards HIV/AIDS campaigns with the attitude of female .... print/audio media and also visual media. Also in the schools peer .... use. Journal of Community and Applied Social Psychology, 3(1), 53-58.

A brittle-fracture methodology for three-dimensional visualization of ductile deformation micromechanisms

NARCIS (Netherlands)

Tasan, C.C.; Hoefnagels, J.P.M.; Geers, M.G.D.

2009-01-01

An improved experimental methodology is developed and successfully evaluated to visualize deformation-induced microevents in ductile sheet metal. This easy-to-use methodology consists in a well-controlled brittle separation of samples previously deformed in a ductile manner, whereby a

Task-dependent engagements of the primary visual cortex during kinesthetic and visual motor imagery.

Science.gov (United States)

Mizuguchi, Nobuaki; Nakamura, Maiko; Kanosue, Kazuyuki

2017-01-01

Motor imagery can be divided into kinesthetic and visual aspects. In the present study, we investigated excitability in the corticospinal tract and primary visual cortex (V1) during kinesthetic and visual motor imagery. To accomplish this, we measured motor evoked potentials (MEPs) and probability of phosphene occurrence during the two types of motor imageries of finger tapping. The MEPs and phosphenes were induced by transcranial magnetic stimulation to the primary motor cortex and V1, respectively. The amplitudes of MEPs and probability of phosphene occurrence during motor imagery were normalized based on the values obtained at rest. Corticospinal excitability increased during both kinesthetic and visual motor imagery, while excitability in V1 was increased only during visual motor imagery. These results imply that modulation of cortical excitability during kinesthetic and visual motor imagery is task dependent. The present finding aids in the understanding of the neural mechanisms underlying motor imagery and provides useful information for the use of motor imagery in rehabilitation or motor imagery training. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Fact Sheet: LGBT Discrimination in Higher Education Financial Aid--Assistance Should Be Allocated on Need, Not Sexual Orientation

Science.gov (United States)

Burns, Crosby

2012-01-01

Through the Free Application for Federal Student Aid, or FAFSA, the federal government provides more financial aid for higher education than any other institution. But because of discriminatory laws the FAFSA treats families headed by two mothers or two fathers differently than families headed by a mother and a father. This treatment distributes…

Optical character recognition reading aid for the visually impaired.

Science.gov (United States)

Grandin, Juan Carlos; Cremaschi, Fabian; Lombardo, Elva; Vitu, Ed; Dujovny, Manuel

2008-06-01

An optical character recognition (OCR) reading machine is a significant help for visually impaired patients. An OCR reading machine is used. This instrument can provide a significant help in order to improve the quality of life of patients with low vision or blindness.

The potential value of a pictorial atlas for aid in the visual diagnosis of 123I FP-CIT SPECT scans

International Nuclear Information System (INIS)

Goethals, I.; Ham, H.; Dobbeleir, A.; D'Asseler, Y.; Santens, P.

2009-01-01

The aim of our study was to evaluate the value of a pictorial atlas of 123 I FP-CIT SPECT images for aid in the visual diagnosis. Patients, materials, methods: Sixty patients, of whom 20 were clinically diagnosed as 'non-parkinsonian' and 40 as having Parkinson's disease or any related disorder, were included in the study. An atlas consisting of 12 123 I FP-CIT SPECT images was constructed first. Validity of the atlas was investigated by performing a receiver operating characteristic (ROC) analysis with the clinical diagnosis as the gold standard. The remaining 48 SPECT images were visually assessed twice by 5 observers, first with and secondly without consulting the atlas, or vice versa. The added value of the atlas was investigated by comparing the diagnostic accuracy and the interobserver variability for both methods. Results: ROC analysis performed on the atlas yielded an area under the curve of 1 for a threshold discriminating between clinically non-parkinsonian and parkinsonian patients that was situated between image 4 and 5 of the atlas, For the diagnostic accuracy, we found that the area under the ROC curve was systematically higher if observers had access to the atlas compared to when they had not (Wilcoxon's test, p 123 I FP-CIT SPECT scans. (orig.)

Plasma dynamics in current sheets

International Nuclear Information System (INIS)

Bogdanov, S.Yu.; Drejden, G.V.; Kirij, N.P.; AN SSSR, Leningrad

1992-01-01

Plasma dynamics in successive stages of current sheet evolution is investigated on the base of analysis of time-spatial variations of electron density and electrodynamic force fields. Current sheet formation is realized in a two-dimensional magnetic field with zero line under the action of relatively small initial disturbances (linear regimes). It is established that in the limits of the formed sheet is concentrated dense (N e ∼= 10 16 cm -3 ) (T i ≥ 100 eV, bar-Z i ≥ 2) hot pressure of which is balanced by the magnetic action of electrodynamic forces is carried out both plasma compression in the sheet limits and the acceleration along the sheet surface from a middle to narrow side edges

Visual Aids for Positive Behavior Support of Young Children with Autism Spectrum Disorders

Science.gov (United States)

Kidder, Jaimee E.; McDonnell, Andrea P.

2017-01-01

Research suggests that many children with ASD are visual learners (Quill, 1997) and may struggle to comprehend expectations presented in a verbal mode only. Visually structured interventions present choices, expectations, tasks, and communication exchanges in a way that is appealing and approachable for visual learners. There are many types of…

46 CFR 232.4 - Balance sheet accounts.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Balance sheet accounts. 232.4 Section 232.4 Shipping... ACTIVITIES UNIFORM FINANCIAL REPORTING REQUIREMENTS Balance Sheet § 232.4 Balance sheet accounts. (a.... (b) Purpose of balance sheet accounts. The balance sheet accounts are intended to disclose the...

“From a Sheet of Paper to the Sky”

Directory of Open Access Journals (Sweden)

Inga

2017-11-01

Full Text Available This short film, “From a Sheet of Paper to the Sky”, grew out of research that I conducted for an essay of the same title, written for the catalogue accompanying the Paul Nash exhibition at Tate Britain (October 2016 to March 2017. In that essay, I argued against the traditional art historical tendency to review an artist’s work in different media separately, and instead proposed that a consideration of Paul Nash’s painting alongside his three-dimensional and textile designs, his printmaking, and photography, resulted in a fuller understanding of both the conceptual underpinnings and the recurring visual motifs in Nash’s work.

Visual Rehabilitation of Persons with Leber's Hereditary Optic Neuropathy.

Science.gov (United States)

Rudanko, S.-L.

1995-01-01

This article presents results of a noncontrolled clinical study of 20 persons with Leber's hereditary optic neuropathy who were treated from 1976 to 1990 at the Low Vision Centre of the Finnish Federation of the Visually Handicapped. The importance of early functional visual rehabilitation is emphasized, as is the use of low vision aids to help…

Global ice sheet modeling

International Nuclear Information System (INIS)

Hughes, T.J.; Fastook, J.L.

1994-05-01

The University of Maine conducted this study for Pacific Northwest Laboratory (PNL) as part of a global climate modeling task for site characterization of the potential nuclear waste respository site at Yucca Mountain, NV. The purpose of the study was to develop a global ice sheet dynamics model that will forecast the three-dimensional configuration of global ice sheets for specific climate change scenarios. The objective of the third (final) year of the work was to produce ice sheet data for glaciation scenarios covering the next 100,000 years. This was accomplished using both the map-plane and flowband solutions of our time-dependent, finite-element gridpoint model. The theory and equations used to develop the ice sheet models are presented. Three future scenarios were simulated by the model and results are discussed

Visualizing risks in cancer communication: A systematic review of computer-supported visual aids.

Science.gov (United States)

Stellamanns, Jan; Ruetters, Dana; Dahal, Keshav; Schillmoeller, Zita; Huebner, Jutta

2017-08-01

Health websites are becoming important sources for cancer information. Lay users, patients and carers seek support for critical decisions, but they are prone to common biases when quantitative information is presented. Graphical representations of risk data can facilitate comprehension, and interactive visualizations are popular. This review summarizes the evidence on computer-supported graphs that present risk data and their effects on various measures. The systematic literature search was conducted in several databases, including MEDLINE, EMBASE and CINAHL. Only studies with a controlled design were included. Relevant publications were carefully selected and critically appraised by two reviewers. Thirteen studies were included. Ten studies evaluated static graphs and three dynamic formats. Most decision scenarios were hypothetical. Static graphs could improve accuracy, comprehension, and behavioural intention. But the results were heterogeneous and inconsistent among the studies. Dynamic formats were not superior or even impaired performance compared to static formats. Static graphs show promising but inconsistent results, while research on dynamic visualizations is scarce and must be interpreted cautiously due to methodical limitations. Well-designed and context-specific static graphs can support web-based cancer risk communication in particular populations. The application of dynamic formats cannot be recommended and needs further research. Copyright © 2017 Elsevier B.V. All rights reserved.

Sheet production apparatus for removing a crystalline sheet from the surface of a melt using gas jets located above and below the crystalline sheet

Energy Technology Data Exchange (ETDEWEB)

Kellerman, Peter L.; Thronson, Gregory D.

2017-06-14

In one embodiment, a sheet production apparatus comprises a vessel configured to hold a melt of a material. A cooling plate is disposed proximate the melt and is configured to form a sheet of the material on the melt. A first gas jet is configured to direct a gas toward an edge of the vessel. A sheet of a material is translated horizontally on a surface of the melt and the sheet is removed from the melt. The first gas jet may be directed at the meniscus and may stabilize this meniscus or increase local pressure within the meniscus.

Computer-Based Tutoring of Visual Concepts: From Novice to Experts.

Science.gov (United States)

Sharples, Mike

1991-01-01

Description of ways in which computers might be used to teach visual concepts discusses hypermedia systems; describes computer-generated tutorials; explains the use of computers to create learning aids such as concept maps, feature spaces, and structural models; and gives examples of visual concept teaching in medical education. (10 references)…

Study of CW Nd-Yag laser welding of Zn-coated steel sheets

International Nuclear Information System (INIS)

Fabbro, Remy; Coste, Frederic; Goebels, Dominique; Kielwasser, Mathieu

2006-01-01

The welding of Zn-coated steel thin sheets is a great challenge for the automotive industry. Previous studies have defined the main physical processes involved. For non-controlled conditions, the zinc vapour expelled from the interface of the two sheets violently expands inside the keyhole and expels the melt pool. When using CO 2 lasers, we have previously shown that an elongated laser spot produces an elongated keyhole, which is efficient for suppressing this effect. We have adopted a similar approach for CW Nd : Yag laser welding and we observe that an elongated spot is not necessary for achieving good weld seams. Several diagnostics were used in order to understand these interesting results. High-speed video camera visualizations of the top and the bottom of the keyhole during the process show the dynamics of the keyhole hydrodynamic behaviour. It appears that the role of the reflected beam on the front keyhole wall for generating a characteristic rear wall deformation is crucial for an efficient stabilization of the process. Our dynamic keyhole modelling, which includes ray tracing, totally confirms this interpretation and explains the results for very different experimental conditions (effect of welding speed, laser intensity, variable sheet thickness, laser beam intensity distribution) that will be presented

Cost of Lightning Strike Related Outages of Visual Navigational Aids at Airports in the United States

Science.gov (United States)

Rakas, J.; Nikolic, M.; Bauranov, A.

2017-12-01

Lightning storms are a serious hazard that can cause damage to vital human infrastructure. In aviation, lightning strikes cause outages to air traffic control equipment and facilities that result in major disruptions in the network, causing delays and financial costs measured in the millions of dollars. Failure of critical systems, such as Visual Navigational Aids (Visual NAVAIDS), are particularly dangerous since NAVAIDS are an essential part of landing procedures. Precision instrument approach, an operation utilized during the poor visibility conditions, utilizes several of these systems, and their failure leads to holding patterns and ultimately diversions to other airports. These disruptions lead to both ground and airborne delay. Accurate prediction of these outages and their costs is a key prerequisite for successful investment planning. The air traffic management and control sector need accurate information to successfully plan maintenance and develop a more robust system under the threat of increasing lightning rates. To analyze the issue, we couple the Remote Monitoring and Logging System (RMLS) database and the Aviation System Performance Metrics (ASPM) databases to identify lightning-induced outages, and connect them with weather conditions, demand and landing runway to calculate the total delays induced by the outages, as well as the number of cancellations and diversions. The costs are then determined by calculating direct costs to aircraft operators and costs of passengers' time for delays, cancellations and diversions. The results indicate that 1) not all NAVAIDS are created equal, and 2) outside conditions matter. The cost of an outage depends on the importance of the failed system and the conditions that prevailed before, during and after the failure. The outage that occurs during high demand and poor weather conditions is more likely to result in more delays and higher costs.

Vitamin and Mineral Supplement Fact Sheets

Science.gov (United States)

... website Submit Search NIH Office of Dietary Supplements Vitamin and Mineral Supplement Fact Sheets Search the list ... Supplements: Background Information Botanical Dietary Supplements: Background Information Vitamin and Mineral Fact Sheets Botanical Supplement Fact Sheets ...

Flow visualization studies of bodies with square cross sections

Science.gov (United States)

Chapman, G. T.; Clarkson, M. H.

1983-01-01

A water-tunnel study was conducted of four bodies. A solution of sodium fluorescein coating the body provided visualization of vortices and feeding sheets and isolated dots of methyl blue dye provided visualization of stream lines. These data, along with published oil-flow photos, were analyzed to develop the topological representation of the flows in cross-flow planes. Presented are the development of the flow along the body at fixed angles of attack and at a fixed body station with changes in angle of attack. Effects of roll angle, body corner radius, and nose bluntness are illustrated.

Dynamics of Radially Expanding Liquid Sheets

Science.gov (United States)

Majumdar, Nayanika; Tirumkudulu, Mahesh S.

2018-04-01

The process of atomization often involves ejecting thin liquid sheets at high speeds from a nozzle that causes the sheet to flap violently and break up into fine droplets. The flapping of the liquid sheet has long been attributed to the sheet's interaction with the surrounding gas phase. Here, we present experimental evidence to the contrary and show that the flapping is caused by the thinning of the liquid sheet as it spreads out from the nozzle exit. The measured growth rates of the waves agree remarkably well with the predictions of a recent theory that accounts for the sheet's thinning but ignores aerodynamic interactions. We anticipate these results to not only lead to more accurate predictions of the final drop-size distribution but also enable more efficient designs of atomizers.

Visual communication in presentation on physics

Science.gov (United States)

Grebenyuk, Konstantin A.

2005-06-01

It is essential that our audience be attentive during lecture, report or another presentation on physics. Therefore we have to take care of both speech and visual communication with audience. Three important aspects of successful visual aids use are singled out in this paper. The main idea is that physicists could appreciably increase efficiency of their presentations by use of these simple principles of presentation art. Recommendations offered are results of special literature research, author' s observations and experience of communication with skilled masters of presentations.

SBOL Visual: A Graphical Language for Genetic Designs

Science.gov (United States)

Adler, Aaron; Beal, Jacob; Bhatia, Swapnil; Cai, Yizhi; Chen, Joanna; Clancy, Kevin; Galdzicki, Michal; Hillson, Nathan J.; Le Novère, Nicolas; Maheshwari, Akshay J.; McLaughlin, James Alastair; Myers, Chris J.; P, Umesh; Pocock, Matthew; Rodriguez, Cesar; Soldatova, Larisa; Stan, Guy-Bart V.; Swainston, Neil; Wipat, Anil; Sauro, Herbert M.

2015-01-01

Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. It consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual. PMID:26633141

Visual Navigation of Complex Information Spaces

Directory of Open Access Journals (Sweden)

Sarah North

1995-11-01

Full Text Available The authors lay the foundation for the introduction of visual navigation aid to assist computer users in direct manipulation of the complex information spaces. By exploring present research on scientific data visualisation and creating a case for improved information visualisation tools, they introduce the design of an improved information visualisation interface utilizing dynamic slider, called Visual-X, incorporating icons with bindable attributes (glyphs. Exploring the improvement that these data visualisations, make to a computing environment, the authors conduct an experiment to compare the performance of subjects who use traditional interfaces and Visual-X. Methodology is presented and conclusions reveal that the use of Visual-X appears to be a promising approach in providing users with a navigation tool that does not overload their cognitive processes.

Application of TensorFlow to recognition of visualized results of fragment molecular orbital (FMO) calculations

OpenAIRE

Saitou, Sona; Iijima, Jun; Fujimoto, Mayu; Mochizuki, Yuji; Okuwaki, Koji; Doi, Hideo; Komeiji, Yuto

2018-01-01

We have applied Google's TensorFlow deep learning toolkit to recognize the visualized results of the fragment molecular orbital (FMO) calculations. Typical protein structures of alpha-helix and beta-sheet provide some characteristic patterns in the two-dimensional map of inter-fragment interaction energy termed as IFIE-map (Kurisaki et al., Biophys. Chem. 130 (2007) 1). A thousand of IFIE-map images with labels depending on the existences of alpha-helix and beta-sheet were prepared by employi...

Buckling and stretching of thin viscous sheets

Science.gov (United States)

O'Kiely, Doireann; Breward, Chris; Griffiths, Ian; Howell, Peter; Lange, Ulrich

2016-11-01

Thin glass sheets are used in smartphone, battery and semiconductor technology, and may be manufactured by producing a relatively thick glass slab and subsequently redrawing it to a required thickness. The resulting sheets commonly possess undesired centerline ripples and thick edges. We present a mathematical model in which a viscous sheet undergoes redraw in the direction of gravity, and show that, in a sufficiently strong gravitational field, buckling is driven by compression in a region near the bottom of the sheet, and limited by viscous resistance to stretching of the sheet. We use asymptotic analysis in the thin-sheet, low-Reynolds-number limit to determine the centerline profile and growth rate of such a viscous sheet.

An Evaluation Of Holograms In Training And As Job Performance Aids

Science.gov (United States)

Frey, Allan H.

1986-08-01

Experimentation was carried out to evaluate holograms for use in training and as job aids. Holograms were compared against line drawings and photographs as methods of presenting visual information needed to accomplish a number of tasks. The dependent variables were assembly speed and assembly errors with people unstressed, assembly speed and assembly errors with people stressed, the percentage of discovered errors in assemblies, the number of correct assemblies misidentified as erroneous, and information extraction. Holograms generally were as good as or better visual aids than either photographs or line drawings. The use of holograms tends to reduce errors rather than speed assembly time in the assembly tasks used in these experiments. They also enhance the discovery of errors when the subject is attempting to locate assembly errors in a construction. The results of this experimentation suggest that serious consideration should be given to the use of holography in the development of job aids and in training. Besides these advantages for job aids, other advantages we found are that when page formated information is stored in man-readable holograms they are still useable when scratched or damaged even when similarly damaged microfilm is unuseable. Holography can also be used to store man and machine readable data simultaneously. Such storage would provide simplified backup in the event of machine failure, and it would permit the development of compatible machine and manual systems for job aid applications.

Tracking millennial-scale Holocene glacial advance and retreat using osmium isotopes: Insights from the Greenland ice sheet

Science.gov (United States)

Rooney, Alan D.; Selby, David; Llyod, Jeremy M.; Roberts, David H.; Luckge, Andreas; Sageman, Bradley B.; Prouty, Nancy G.

2016-01-01

High-resolution Os isotope stratigraphy can aid in reconstructing Pleistocene ice sheet fluctuation and elucidating the role of local and regional weathering fluxes on the marine Os residence time. This paper presents new Os isotope data from ocean cores adjacent to the West Greenland ice sheet that have excellent chronological controls. Cores MSM-520 and DA00-06 represent distal to proximal sites adjacent to two West Greenland ice streams. Core MSM-520 has a steadily decreasing Os signal over the last 10 kyr (187Os/188Os = 1.35–0.81). In contrast, Os isotopes from core DA00-06 (proximal to the calving front of Jakobshavn Isbræ) highlight four stages of ice stream retreat and advance over the past 10 kyr (187Os/188Os = 2.31; 1.68; 2.09; 1.47). Our high-resolution chemostratigraphic records provide vital benchmarks for ice-sheet modelers as we attempt to better constrain the future response of major ice sheets to climate change. Variations in Os isotope composition from sediment and macro-algae (seaweed) sourced from regional and global settings serve to emphasize the overwhelming effect weathering sources have on seawater Os isotope composition. Further, these findings demonstrate that the residence time of Os is shorter than previous estimates of ∼104 yr.

Ohm's law for a current sheet

Science.gov (United States)

Lyons, L. R.; Speiser, T. W.

1985-01-01

The paper derives an Ohm's law for single-particle motion in a current sheet, where the magnetic field reverses in direction across the sheet. The result is considerably different from the resistive Ohm's law often used in MHD studies of the geomagnetic tail. Single-particle analysis is extended to obtain a self-consistency relation for a current sheet which agrees with previous results. The results are applicable to the concept of reconnection in that the electric field parallel to the current is obtained for a one-dimensional current sheet with constant normal magnetic field. Dissipated energy goes directly into accelerating particles within the current sheet.

Computer aided drug design

Science.gov (United States)

Jain, A.

2017-08-01

Computer based method can help in discovery of leads and can potentially eliminate chemical synthesis and screening of many irrelevant compounds, and in this way, it save time as well as cost. Molecular modeling systems are powerful tools for building, visualizing, analyzing and storing models of complex molecular structure that can help to interpretate structure activity relationship. The use of various techniques of molecular mechanics and dynamics and software in Computer aided drug design along with statistics analysis is powerful tool for the medicinal chemistry to synthesis therapeutic and effective drugs with minimum side effect.

Temporal Visualization for Legal Case Histories.

Science.gov (United States)

Harris, Chanda; Allen, Robert B.; Plaisant, Catherine; Shneiderman, Ben

1999-01-01

Discusses visualization of legal information using a tool for temporal information called "LifeLines." Explores ways "LifeLines" could aid in viewing the links between original case and direct and indirect case histories. Uses the case of Apple Computer, Inc. versus Microsoft Corporation and Hewlett Packard Company to…

Adjustable focus laser sheet module for generating constant maximum width sheets for use in optical flow diagnostics

International Nuclear Information System (INIS)

Hult, J; Mayer, S

2011-01-01

A general design of a laser light sheet module with adjustable focus is presented, where the maximum sheet width is preserved over a fixed region. In contrast, conventional focusing designs are associated with a variation in maximum sheet width with focal position. A four lens design is proposed here, where the first three lenses are employed for focusing, and the last for sheet expansion. A maximum sheet width of 1100 µm was maintained over a 50 mm long distance, for focal distances ranging from 75 to 500 mm, when a 532 nm laser beam with a beam quality factor M 2 = 29 was used for illumination

The effects of computer-aided design software on engineering students' spatial visualisation skills

Science.gov (United States)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

Collisionless current sheet equilibria

Science.gov (United States)

Neukirch, T.; Wilson, F.; Allanson, O.

2018-01-01

Current sheets are important for the structure and dynamics of many plasma systems. In space and astrophysical plasmas they play a crucial role in activity processes, for example by facilitating the release of magnetic energy via processes such as magnetic reconnection. In this contribution we will focus on collisionless plasma systems. A sensible first step in any investigation of physical processes involving current sheets is to find appropriate equilibrium solutions. The theory of collisionless plasma equilibria is well established, but over the past few years there has been a renewed interest in finding equilibrium distribution functions for collisionless current sheets with particular properties, for example for cases where the current density is parallel to the magnetic field (force-free current sheets). This interest is due to a combination of scientific curiosity and potential applications to space and astrophysical plasmas. In this paper we will give an overview of some of the recent developments, discuss their potential applications and address a number of open questions.

17 CFR 210.6-04 - Balance sheets.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Balance sheets. 210.6-04... sheets. This rule is applicable to balance sheets filed by registered investment companies except for... of this part. Balance sheets filed under this rule shall comply with the following provisions: Assets...

Ice sheet in peril

DEFF Research Database (Denmark)

Hvidberg, Christine Schøtt

2016-01-01

Earth's large ice sheets in Greenland and Antarctica are major contributors to sea level change. At present, the Greenland Ice Sheet (see the photo) is losing mass in response to climate warming in Greenland (1), but the present changes also include a long-term response to past climate transitions...

The transposition of the balance sheet to financial and functional balance sheet. Research and development

Directory of Open Access Journals (Sweden)

Liana GĂDĂU

2015-09-01

Full Text Available As the title suggests, through this paper we want to highlight the necessity of treating again the content and the form of the balance sheet in order to adapt it to a more efficient analysis, this way surpassing the informational valences of the classic balance sheet. The functional and the financial balance sheet will be taken into account. These models of balance sheet permit the complex analyses regarding the solvability or the bankruptcy risk of an enterprise to take place, and also other analyses, like the analysis of the structure and the financial/ functional equilibrium, the analysis of the company on operating cycles and their role in the functioning of the company. Through the particularities offered by each of these two models of balance sheet, we want to present the advantages of a superior informing. This content of this material is based on a vast investigation of the specialized literature.

Pool boiling visualization on open microchannel surfaces

Directory of Open Access Journals (Sweden)

Kaniowski Robert

2017-01-01

Full Text Available The paper presents visualization investigations into pool boiling heat transfer for open minichannel surfaces. The experiments were carried out wih saturated water at atmospheric pressure. Parallel microchannels fabricated by machining were about 0.3 mm wide and 0.2 to 0.4 mm deep. High-speed videos were used as an aid to understanding the heat transfer mechanism. The visualization study aimed at identifying nucleation sites of the departing bubbles and determining their diameters and frequency at various superheats.

Ice_Sheets_CCI: Essential Climate Variables for the Greenland Ice Sheet

Science.gov (United States)

Forsberg, R.; Sørensen, L. S.; Khan, A.; Aas, C.; Evansberget, D.; Adalsteinsdottir, G.; Mottram, R.; Andersen, S. B.; Ahlstrøm, A.; Dall, J.; Kusk, A.; Merryman, J.; Hvidberg, C.; Khvorostovsky, K.; Nagler, T.; Rott, H.; Scharrer, M.; Shepard, A.; Ticconi, F.; Engdahl, M.

2012-04-01

As part of the ESA Climate Change Initiative (www.esa-cci.org) a long-term project "ice_sheets_cci" started January 1, 2012, in addition to the existing 11 projects already generating Essential Climate Variables (ECV) for the Global Climate Observing System (GCOS). The "ice_sheets_cci" goal is to generate a consistent, long-term and timely set of key climate parameters for the Greenland ice sheet, to maximize the impact of European satellite data on climate research, from missions such as ERS, Envisat and the future Sentinel satellites. The climate parameters to be provided, at first in a research context, and in the longer perspective by a routine production system, would be grids of Greenland ice sheet elevation changes from radar altimetry, ice velocity from repeat-pass SAR data, as well as time series of marine-terminating glacier calving front locations and grounding lines for floating-front glaciers. The ice_sheets_cci project will involve a broad interaction of the relevant cryosphere and climate communities, first through user consultations and specifications, and later in 2012 optional participation in "best" algorithm selection activities, where prototype climate parameter variables for selected regions and time frames will be produced and validated using an objective set of criteria ("Round-Robin intercomparison"). This comparative algorithm selection activity will be completely open, and we invite all interested scientific groups with relevant experience to participate. The results of the "Round Robin" exercise will form the algorithmic basis for the future ECV production system. First prototype results will be generated and validated by early 2014. The poster will show the planned outline of the project and some early prototype results.

AI applications in sheet metal forming

CERN Document Server

Hussein, Hussein

2017-01-01

This book comprises chapters on research work done around the globe in the area of artificial intelligence (AI) applications in sheet metal forming. The first chapter offers an introduction to various AI techniques and sheet metal forming, while subsequent chapters describe traditional procedures/methods used in various sheet metal forming processes, and focus on the automation of those processes by means of AI techniques, such as KBS, ANN, GA, CBR, etc. Feature recognition and the manufacturability assessment of sheet metal parts, process planning, strip-layout design, selecting the type and size of die components, die modeling, and predicting die life are some of the most important aspects of sheet metal work. Traditionally, these activities are highly experience-based, tedious and time consuming. In response, researchers in several countries have applied various AI techniques to automate these activities, which are covered in this book. This book will be useful for engineers working in sheet metal industri...

Feasibility of visual aids for risk evaluation by hospitalized patients with coronary artery disease: results from face-to-face interviews

Directory of Open Access Journals (Sweden)

Magliano CAS

2018-05-01

Full Text Available Carlos Alberto da Silva Magliano,1 Andrea Liborio Monteiro,2 Bernardo Rangel Tura,1 Claudia Silvia Rocha Oliveira,1 Amanda Rebeca de Oliveira Rebelo,1 Claudia Cristina de Aguiar Pereira3 1NATS, Instituto Nacional de Cardiologia, INC, Rio de Janeiro, Rio de Janeiro, Brazil; 2Department of Pharmacy Systems, Outcomes and Policy, College of Pharmacy, University of Illinois at Chicago, Chicago, IL, USA; 3Escola Nacional de Saúde Pública, ENSP, FIOCRUZ, Rio de Janeiro, Brazil Purpose: Communicating information about risk and probability to patients is considered a difficult task. In this study, we aim to evaluate the use of visual aids representing perioperative mortality and long-term survival in the communication process for patients diagnosed with coronary artery disease at the National Institute of Cardiology, a Brazilian public hospital specializing in cardiology. Patients and methods: One-on-one interviews were conducted between August 1 and November 20, 2017. Patients were asked to imagine that their doctor was seeking their input in the decision regarding which treatment represented the best option for them. Patients were required to choose between alternatives by considering only the different benefits and risks shown in each scenario, described as the proportion of patients who had died during the perioperative period and within 5 years. Each participant evaluated the same eight scenarios. We evaluated their answers in a qualitative and quantitative analysis. Results: The main findings were that all patients verbally expressed concern about perioperative mortality and that 25% did not express concern about long-term mortality. Twelve percent considered the probabilities irrelevant on the grounds that their prognosis would depend on “God’s will.” Ten percent of the patients disregarded the reported likelihood of perioperative mortality, deciding to focus solely on the “chance of being cured.” In the quantitative analysis, the vast

Effect of Temperature and Sheet Temper on Isothermal Solidification Kinetics in Clad Aluminum Brazing Sheet

Science.gov (United States)

Benoit, Michael J.; Whitney, Mark A.; Wells, Mary A.; Winkler, Sooky

2016-09-01

Isothermal solidification (IS) is a phenomenon observed in clad aluminum brazing sheets, wherein the amount of liquid clad metal is reduced by penetration of the liquid clad into the core. The objective of the current investigation is to quantify the rate of IS through the use of a previously derived parameter, the Interface Rate Constant (IRC). The effect of peak temperature and initial sheet temper on IS kinetics were investigated. The results demonstrated that IS is due to the diffusion of silicon (Si) from the liquid clad layer into the solid core. Reduced amounts of liquid clad at long liquid duration times, a roughened sheet surface, and differences in resolidified clad layer morphology between sheet tempers were observed. Increased IS kinetics were predicted at higher temperatures by an IRC model as well as by experimentally determined IRC values; however, the magnitudes of these values are not in good agreement due to deficiencies in the model when applied to alloys. IS kinetics were found to be higher for sheets in the fully annealed condition when compared with work-hardened sheets, due to the influence of core grain boundaries providing high diffusivity pathways for Si diffusion, resulting in more rapid liquid clad penetration.

Auditory, Visual, and Auditory-Visual Speech Perception by Individuals with Cochlear Implants versus Individuals with Hearing Aids

Science.gov (United States)

Most, Tova; Rothem, Hilla; Luntz, Michal

2009-01-01

The researchers evaluated the contribution of cochlear implants (CIs) to speech perception by a sample of prelingually deaf individuals implanted after age 8 years. This group was compared with a group with profound hearing impairment (HA-P), and with a group with severe hearing impairment (HA-S), both of which used hearing aids. Words and…

Energy information sheets

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

Experiments on sheet metal shearing

OpenAIRE

Gustafsson, Emil

2013-01-01

Within the sheet metal industry, different shear cutting technologies are commonly used in several processing steps, e.g. in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material.Numerical models to predict forces and sheared edge geometry for different sheet metal grades and different shear parameter set-ups a...

Predicting Pulsar Scintillation from Refractive Plasma Sheets

Science.gov (United States)

Simard, Dana; Pen, Ue-Li

2018-05-01

The dynamic and secondary spectra of many pulsars show evidence for long-lived, aligned images of the pulsar that are stationary on a thin scattering sheet. One explanation for this phenomenon considers the effects of wave crests along sheets in the ionized interstellar medium, such as those due to Alfvén waves propagating along current sheets. If these sheets are closely aligned to our line-of-sight to the pulsar, high bending angles arise at the wave crests and a selection effect causes alignment of images produced at different crests, similar to grazing reflection off of a lake. Using geometric optics, we develop a simple parameterized model of these corrugated sheets that can be constrained with a single observation and that makes observable predictions for variations in the scintillation of the pulsar over time and frequency. This model reveals qualitative differences between lensing from overdense and underdense corrugated sheets: Only if the sheet is overdense compared to the surrounding interstellar medium can the lensed images be brighter than the line-of-sight image to the pulsar, and the faint lensed images are closer to the pulsar at higher frequencies if the sheet is underdense, but at lower frequencies if the sheet is overdense.

Energized Oxygen : Speiser Current Sheet Bifurcation

Science.gov (United States)

George, D. E.; Jahn, J. M.

2017-12-01

A single population of energized Oxygen (O+) is shown to produce a cross-tail bifurcated current sheet in 2.5D PIC simulations of the magnetotail without the influence of magnetic reconnection. Treatment of oxygen in simulations of space plasmas, specifically a magnetotail current sheet, has been limited to thermal energies despite observations of and mechanisms which explain energized ions. We performed simulations of a homogeneous oxygen background, that has been energized in a physically appropriate manner, to study the behavior of current sheets and magnetic reconnection, specifically their bifurcation. This work uses a 2.5D explicit Particle-In-a-Cell (PIC) code to investigate the dynamics of energized heavy ions as they stream Dawn-to-Dusk in the magnetotail current sheet. We present a simulation study dealing with the response of a current sheet system to energized oxygen ions. We establish a, well known and studied, 2-species GEM Challenge Harris current sheet as a starting point. This system is known to eventually evolve and produce magnetic reconnection upon thinning of the current sheet. We added a uniform distribution of thermal O+ to the background. This 3-species system is also known to eventually evolve and produce magnetic reconnection. We add one additional variable to the system by providing an initial duskward velocity to energize the O+. We also traced individual particle motion within the PIC simulation. Three main results are shown. First, energized dawn- dusk streaming ions are clearly seen to exhibit sustained Speiser motion. Second, a single population of heavy ions clearly produces a stable bifurcated current sheet. Third, magnetic reconnection is not required to produce the bifurcated current sheet. Finally a bifurcated current sheet is compatible with the Harris current sheet model. This work is the first step in a series of investigations aimed at studying the effects of energized heavy ions on magnetic reconnection. This work differs

Experimental formability analysis of bondal sandwich sheet

Science.gov (United States)

Kami, Abdolvahed; Banabic, Dorel

2018-05-01

Metal/polymer/metal sandwich sheets have recently attracted the interests of industries like automotive industry. These sandwich sheets have superior properties over single-layer metallic sheets including good sound and vibration damping and light weight. However, the formability of these sandwich sheets should be enhanced which requires more research. In this paper, the formability of Bondal sheet (DC06/viscoelastic polymer/DC06 sandwich sheet) was studied through different types of experiments. The mechanical properties of Bondal were determined by uniaxial tensile tests. Hemispherical punch stretching and hydraulic bulge tests were carried out to determine the forming limit diagram (FLD) of Bondal. Furthermore, cylindrical and square cup drawing tests were performed in dry and oil lubricated conditions. These tests were conducted at different blank holding forces (BHFs). An interesting observation about Bondal sheet deep drawing was obtaining of higher drawing depths at dry condition in comparison with oil-lubricated condition.

Folded Sheet Versus Transparent Sheet Models for Human Symmetry Judgments

Directory of Open Access Journals (Sweden)

Jacques Ninio

2011-07-01

Full Text Available As a contribution to the mysteries of human symmetry perception, reaction time data were collected on the detection of symmetry or repetition violations, in the context of short term visual memory studies. The histograms for reaction time distributions are rather narrow in the case of symmetry judgments. Their analysis was performed in terms of a simple kinetic model of a mental process in two steps, a slow one for the construction of the representation of the images to be compared, and a fast one, in the 50 ms range, for the decision. There was no need for an additional ‘mental rotation’ step. Symmetry seems to facilitate the construction step. I also present here original stimuli showing a color equalization effect across a symmetry axis, and its counterpart in periodic patterns. According to a “folded sheet model”, when a shape is perceived, the brain automatically constructs a mirror-image representation of the shape. Based in part on the reaction time analysis, I present here an alternative “transparent sheet” model in which the brain constructs a single representation, which can be accessed from two sides, thus generating simultaneously a pattern and its mirror-symmetric partner. Filtering processes, implied by current models of symmetry perception could intervene at an early stage, by nucleating the propagation of similar perceptual groupings in the two symmetric images.

Ice sheet hydrology - a review

International Nuclear Information System (INIS)

Jansson, Peter; Naeslund, Jens-Ove; Rodhe, Lars

2007-03-01

This report summarizes the theoretical knowledge on water flow in and beneath glaciers and ice sheets and how these theories are applied in models to simulate the hydrology of ice sheets. The purpose is to present the state of knowledge and, perhaps more importantly, identify the gaps in our understanding of ice sheet hydrology. Many general concepts in hydrology and hydraulics are applicable to water flow in glaciers. However, the unique situation of having the liquid phase flowing in conduits of the solid phase of the same material, water, is not a commonly occurring phenomena. This situation means that the heat exchange between the phases and the resulting phase changes also have to be accounted for in the analysis. The fact that the solidus in the pressure-temperature dependent phase diagram of water has a negative slope provides further complications. Ice can thus melt or freeze from both temperature and pressure variations or variations in both. In order to provide details of the current understanding of water flow in conjunction with deforming ice and to provide understanding for the development of ideas and models, emphasis has been put on the mathematical treatments, which are reproduced in detail. Qualitative results corroborating theory or, perhaps more often, questioning the simplifications made in theory, are also given. The overarching problem with our knowledge of glacier hydrology is the gap between the local theories of processes and the general flow of water in glaciers and ice sheets. Water is often channelized in non-stationary conduits through the ice, features which due to their minute size relative to the size of glaciers and ice sheets are difficult to incorporate in spatially larger models. Since the dynamic response of ice sheets to global warming is becoming a key issue in, e.g. sea-level change studies, the problems of the coupling between the hydrology of an ice sheet and its dynamics is steadily gaining interest. New work is emerging

Ice sheet hydrology - a review

Energy Technology Data Exchange (ETDEWEB)

Jansson, Peter; Naeslund, Jens-Ove [Dept. of Physical Geography and Quaternary Geology, Stockholm Univ., Stockholm (Sweden); Rodhe, Lars [Geological Survey of Sweden, Uppsala (Sweden)

2007-03-15

This report summarizes the theoretical knowledge on water flow in and beneath glaciers and ice sheets and how these theories are applied in models to simulate the hydrology of ice sheets. The purpose is to present the state of knowledge and, perhaps more importantly, identify the gaps in our understanding of ice sheet hydrology. Many general concepts in hydrology and hydraulics are applicable to water flow in glaciers. However, the unique situation of having the liquid phase flowing in conduits of the solid phase of the same material, water, is not a commonly occurring phenomena. This situation means that the heat exchange between the phases and the resulting phase changes also have to be accounted for in the analysis. The fact that the solidus in the pressure-temperature dependent phase diagram of water has a negative slope provides further complications. Ice can thus melt or freeze from both temperature and pressure variations or variations in both. In order to provide details of the current understanding of water flow in conjunction with deforming ice and to provide understanding for the development of ideas and models, emphasis has been put on the mathematical treatments, which are reproduced in detail. Qualitative results corroborating theory or, perhaps more often, questioning the simplifications made in theory, are also given. The overarching problem with our knowledge of glacier hydrology is the gap between the local theories of processes and the general flow of water in glaciers and ice sheets. Water is often channelized in non-stationary conduits through the ice, features which due to their minute size relative to the size of glaciers and ice sheets are difficult to incorporate in spatially larger models. Since the dynamic response of ice sheets to global warming is becoming a key issue in, e.g. sea-level change studies, the problems of the coupling between the hydrology of an ice sheet and its dynamics is steadily gaining interest. New work is emerging

Disintegration of liquid sheets

Science.gov (United States)

Mansour, Adel; Chigier, Norman

1990-01-01

The development, stability, and disintegration of liquid sheets issuing from a two-dimensional air-assisted nozzle is studied. Detailed measurements of mean drop size and velocity are made using a phase Doppler particle analyzer. Without air flow the liquid sheet converges toward the axis as a result of surface tension forces. With airflow a quasi-two-dimensional expanding spray is formed. The air flow causes small variations in sheet thickness to develop into major disturbances with the result that disruption starts before the formation of the main break-up region. In the two-dimensional variable geometry air-blast atomizer, it is shown that the air flow is responsible for the formation of large, ordered, and small chaotic 'cell' structures.

Root-growth-inhibiting sheet

Science.gov (United States)

Burton, F.G.; Cataldo, D.A.; Cline, J.F.; Skiens, W.E.; Van Voris, P.

1993-01-26

In accordance with this invention, a porous sheet material is provided at intervals with bodies of a polymer which contain a 2,6-dinitroaniline. The sheet material is made porous to permit free passage of water. It may be either a perforated sheet or a woven or non-woven textile material. A particularly desirable embodiment is a non-woven fabric of non-biodegradable material. This type of material is known as a geotextile'' and is used for weed control, prevention of erosion on slopes, and other landscaping purposes. In order to obtain a root repelling property, a dinitroaniline is blended with a polymer which is attached to the geotextile or other porous material.

Root-growth-inhibiting sheet

Science.gov (United States)

Burton, Frederick G.; Cataldo, Dominic A.; Cline, John F.; Skiens, W. Eugene; Van Voris, Peter

1993-01-01

In accordance with this invention, a porous sheet material is provided at intervals with bodies of a polymer which contain a 2,6-dinitroaniline. The sheet material is made porous to permit free passage of water. It may be either a perforated sheet or a woven or non-woven textile material. A particularly desirable embodiment is a non-woven fabric of non-biodegradable material. This type of material is known as a "geotextile" and is used for weed control, prevention of erosion on slopes, and other landscaping purposes. In order to obtain a root repelling property, a dinitroaniline is blended with a polymer which is attached to the geotextile or other porous material.

VISUAL ABILITY IN AMBLYOPIC CHILDREN COMPARED TO CHILDREN WITH NORMAL VISUAL ACUITY

Directory of Open Access Journals (Sweden)

Zorica Tončić

2016-03-01

Full Text Available Vision rehabilitation in adults with low vision, even in children, is achieved with special devices, called low vision aids, LVA. The aim of the study is to determine the degree of visual function in amblyopic children and daily activities that are best related to those of normally sighted peers with normal visual acuity. The subjects were divided into two groups, matched 1:1 by age and gender: the first group consisted of 19 amblyopic children, and the second one consisted of 19 children with normal visual acuity. The questionnaire used to assess visual ability was Cardiff Visual Ability Questionnaire for Children (CVAQC, a reliable instrument for measuring visual ability in children with low vision. The study was conducted in the only rehabilitation center for amblyopic children in this region, so this is also a pioneer study. The overall result of CVAQC in amblyopic children was 1.287 log vs.-2.956, representing statistically significantly poorer visual ability in comparison to peers without vision deficit (p˂0.005. Amblyopic children function best in entertainment activities, especially in listening music (-2.31 log; as for sport, these children report swimming to be their favourite activity (-0.99 log. In the field of education they show best results in language acquisition (-0.79 log and the worst in mathematics (3.13 log. The greatest problem is reading small print texts books (2.61 log. Low vision children have poorer result of visual function in comparison to their peers with normal visual acuity. A precise deficit assessment in the most important spheres of life can be determined by using the questionnaires, so the rehabilitation can be rightly chosen.

Labeling and analysis of chicken taste buds using molecular markers in oral epithelial sheets

OpenAIRE

Rajapaksha, Prasangi; Wang, Zhonghou; Venkatesan, Nandakumar; Tehrani, Kayvan F.; Payne, Jason; Swetenburg, Raymond L.; Kawabata, Fuminori; Tabata, Shoji; Mortensen, Luke J.; Stice, Steven L.; Beckstead, Robert; Liu, Hong-Xiang

2016-01-01

In chickens, the sensory organs for taste are the taste buds in the oral cavity, of which there are ~240?360 in total number as estimated by scanning electron microscopy (SEM). There is not an easy way to visualize all taste buds in chickens. Here, we report a highly efficient method for labeling chicken taste buds in oral epithelial sheets using the molecular markers Vimentin and ?-Gustducin. Immediate tissue fixation following incubation with sub-epithelially injected proteases enabled us t...

Mobility Balance Sheet 2009

International Nuclear Information System (INIS)

Jorritsma, P.; Derriks, H.; Francke, J.; Gordijn, H.; Groot, W.; Harms, L.; Van der Loop, H.; Peer, S.; Savelberg, F.; Wouters, P.

2009-06-01

The Mobility Balance Sheet provides an overview of the state of the art of mobility in the Netherlands. In addition to describing the development of mobility this report also provides explanations for the growth of passenger and freight transport. Moreover, the Mobility Balance Sheet also focuses on a topical theme: the effects of economic crises on mobility. [nl

The visual advice centre Eindhoven, an experiment in Dutch low vision care

NARCIS (Netherlands)

Neve, J.J.; Jorritsma, F.F.; Kinds, G.F.; Kooijman, A.C.; Looijestijn, P.L.; Welling, J.A.; Wildt, van der G.J.

1994-01-01

The Visual Advice Centre Eindhoven (VAC-E) provides the partially sighted with advice and prescriptions for low vision aids and illumination on the basis of an examination of their individual needs and their residual visual abilities. In the Dutch context of low vision care the V AC-E can be

Development of Visualization Tools for ZPPR-15 Analysis

International Nuclear Information System (INIS)

Lee, Min Jae; Kim, Sang Ji

2014-01-01

ZPPR-15 cores consist of various drawer masters that have great heterogeneity. In order to build a proper homogenization strategy, the geometry of the drawer masters should be carefully analyzed with a visualization. Additionally, a visualization of drawer masters and the core configuration is necessary for minimizing human error during the input processing. For this purpose, visualization tools for a ZPPR-15 analysis has been developed based on a Perl script. In the following section, the implementation of visualization tools will be described and various visualization samples for both drawer masters and ZPPR-15 cores will be demonstrated. Visualization tools for drawer masters and a core configuration were successfully developed for a ZPPR-15 analysis. The visualization tools are expected to be useful for understanding ZPPR-15 experiments, and finding deterministic models of ZPPR-15. It turned out that generating VTK files is handy but the application of VTK files is powerful with the aid of the VISIT program

Safety advice sheets

CERN Multimedia

HSE Unit

2013-01-01

You never know when you might be faced with questions such as: when/how should I dispose of a gas canister? Where can I find an inspection report? How should I handle/store/dispose of a chemical substance…?   The SI section of the DGS/SEE Group is primarily responsible for safety inspections, evaluating the safety conditions of equipment items, premises and facilities. On top of this core task, it also regularly issues “Safety Advice Sheets” on various topics, designed to be of assistance to users but also to recall and reinforce safety rules and procedures. These clear and concise sheets, complete with illustrations, are easy to display in the appropriate areas. The following safety advice sheets have been issued so far: Other sheets will be published shortly. Suggestions are welcome and should be sent to the SI section of the DGS/SEE Group. Please send enquiries to general-safety-visits.service@cern.ch.

Manifold free multiple sheet superplastic forming

Science.gov (United States)

Elmer, John W.; Bridges, Robert L.

2004-01-13

Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

21 CFR 880.5180 - Burn sheet.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Burn sheet. 880.5180 Section 880.5180 Food and... Burn sheet. (a) Identification. A burn sheet is a device made of a porous material that is wrapped aroung a burn victim to retain body heat, to absorb wound exudate, and to serve as a barrier against...

Sheet-bulk metal forming – forming of functional components from sheet metals

Directory of Open Access Journals (Sweden)

Merklein Marion

2015-01-01

Full Text Available The paper gives an overview on the application of sheet-bulk metal forming operations in both scientific and industrial environment. Beginning with the need for an innovative forming technology, the definition of this new process class is introduced. The rising challenges of the application of bulk metal forming operations on sheet metals are presented and the demand on a holistic investigation of this topic is motivated. With the help of examples from established production processes, the latest state of technology and the lack on fundamental knowledge is shown. Furthermore, perspectives regarding new research topics within sheet-bulk metal forming are presented. These focus on processing strategies to improve the quality of functional components by the application of process-adapted semi-finished products as well as the local adaption of the tribological system.

Reconstructing the last Irish Ice Sheet 2: a geomorphologically-driven model of ice sheet growth, retreat and dynamics

Science.gov (United States)

Greenwood, Sarah L.; Clark, Chris D.

2009-12-01

The ice sheet that once covered Ireland has a long history of investigation. Much prior work focussed on localised evidence-based reconstructions and ice-marginal dynamics and chronologies, with less attention paid to an ice sheet wide view of the first order properties of the ice sheet: centres of mass, ice divide structure, ice flow geometry and behaviour and changes thereof. In this paper we focus on the latter aspect and use our new, countrywide glacial geomorphological mapping of the Irish landscape (>39 000 landforms), and our analysis of the palaeo-glaciological significance of observed landform assemblages (article Part 1), to build an ice sheet reconstruction yielding these fundamental ice sheet properties. We present a seven stage model of ice sheet evolution, from initiation to demise, in the form of palaeo-geographic maps. An early incursion of ice from Scotland likely coalesced with local ice caps and spread in a south-westerly direction 200 km across Ireland. A semi-independent Irish Ice Sheet was then established during ice sheet growth, with a branching ice divide structure whose main axis migrated up to 140 km from the west coast towards the east. Ice stream systems converging on Donegal Bay in the west and funnelling through the North Channel and Irish Sea Basin in the east emerge as major flow components of the maximum stages of glaciation. Ice cover is reconstructed as extending to the continental shelf break. The Irish Ice Sheet became autonomous (i.e. separate from the British Ice Sheet) during deglaciation and fragmented into multiple ice masses, each decaying towards the west. Final sites of demise were likely over the mountains of Donegal, Leitrim and Connemara. Patterns of growth and decay of the ice sheet are shown to be radically different: asynchronous and asymmetric in both spatial and temporal domains. We implicate collapse of the ice stream system in the North Channel - Irish Sea Basin in driving such asymmetry, since rapid

Pre-LGM Northern Hemisphere ice sheet topography

Directory of Open Access Journals (Sweden)

J. Kleman

2013-10-01

Full Text Available We here reconstruct the paleotopography of Northern Hemisphere ice sheets during the glacial maxima of marine isotope stages (MIS 5b and 4.We employ a combined approach, blending geologically based reconstruction and numerical modeling, to arrive at probable ice sheet extents and topographies for each of these two time slices. For a physically based 3-D calculation based on geologically derived 2-D constraints, we use the University of Maine Ice Sheet Model (UMISM to calculate ice sheet thickness and topography. The approach and ice sheet modeling strategy is designed to provide robust data sets of sufficient resolution for atmospheric circulation experiments for these previously elusive time periods. Two tunable parameters, a temperature scaling function applied to a spliced Vostok–GRIP record, and spatial adjustment of the climatic pole position, were employed iteratively to achieve a good fit to geological constraints where such were available. The model credibly reproduces the first-order pattern of size and location of geologically indicated ice sheets during marine isotope stages (MIS 5b (86.2 kyr model age and 4 (64 kyr model age. From the interglacial state of two north–south obstacles to atmospheric circulation (Rocky Mountains and Greenland, by MIS 5b the emergence of combined Quebec–central Arctic and Scandinavian–Barents-Kara ice sheets had increased the number of such highland obstacles to four. The number of major ice sheets remained constant through MIS 4, but the merging of the Cordilleran and the proto-Laurentide Ice Sheet produced a single continent-wide North American ice sheet at the LGM.

A new research project on the interaction of the solid Earth and the Antarctic Ice Sheet

Science.gov (United States)

Fukuda, Y.; Nishijima, J.; Kazama, T.; Nakamura, K.; Doi, K.; Suganuma, Y.; Okuno, J.; Araya, A.; Kaneda, H.; Aoyama, Y.

2017-12-01

A new research project of "Grant-in-Aid for Scientific Research on Innovative Areas" funded by JSPS (Japan Society for the Promotion of Science) has recently been launched. The title of the project is "Giant reservoirs of heat/water/material: Global environmental changes driven by Southern Ocean and Antarctic Ice Sheet", and as a five years project, is aiming to establish a new research area for Antarctic environmental system science. The project consists of 7 research topics, including Antarctic ice sheet and Southern ocean sciences, new observation methodology, modeling and other interdisciplinary topics, and we are involved in the topic A02-2, "Interaction of the solid Earth and the Antarctic Ice Sheet". The Antarctic ice sheet, which relates to the global climate changes through the sea level rise and ocean circulation, is an essential element of the Earth system for predicting the future environment changes. Thus many studies of the ice sheet changes have been conducted by means of geomorphological, geological, geodetic surveys, as well as satellite gravimetry and satellite altimetry. For these studies, one of the largest uncertainties is the effects of GIA. Therefore, GIA as a key to investigate the interaction between the solid Earth and the ice sheet changes, we plan to conduct geomorphological, geological and geodetic surveys in the inland mountain areas and the coastal areas including the surrounding areas of a Japanese station Syowa in East Antarctica, where the in-situ data for constraining GIA models are very few. Combining these new observations with other in-site data, various satellite data and numerical modeling, we aim to estimating a precise GIA model, constructing a reliable ice melting history after the last glacial maximum and obtaining the viscoelastic structure of the Earth's interior. In the presentation, we also show the five years research plans as well. This study was partially supported by JSPS KAKENHI Grant No. 17H06321.

Research on Al-alloy sheet forming formability during warm/hot sheet hydroforming based on elliptical warm bulging test

Science.gov (United States)

Cai, Gaoshen; Wu, Chuanyu; Gao, Zepu; Lang, Lihui; Alexandrov, Sergei

2018-05-01

An elliptical warm/hot sheet bulging test under different temperatures and pressure rates was carried out to predict Al-alloy sheet forming limit during warm/hot sheet hydroforming. Using relevant formulas of ultimate strain to calculate and dispose experimental data, forming limit curves (FLCS) in tension-tension state of strain (TTSS) area are obtained. Combining with the basic experimental data obtained by uniaxial tensile test under the equivalent condition with bulging test, complete forming limit diagrams (FLDS) of Al-alloy are established. Using a quadratic polynomial curve fitting method, material constants of fitting function are calculated and a prediction model equation for sheet metal forming limit is established, by which the corresponding forming limit curves in TTSS area can be obtained. The bulging test and fitting results indicated that the sheet metal FLCS obtained were very accurate. Also, the model equation can be used to instruct warm/hot sheet bulging test.

A Visualization-Based Tutoring Tool for Engineering Education

Science.gov (United States)

Nguyen, Tang-Hung; Khoo, I.-Hung

2010-06-01

In engineering disciplines, students usually have hard time to visualize different aspects of engineering analysis and design, which inherently are too complex or abstract to fully understand without the aid of visual explanations or visualizations. As examples, when learning materials and sequences of construction process, students need to visualize how all components of a constructed facility are assembled? Such visualization can not be achieved in a textbook and a traditional lecturing environment. In this paper, the authors present the development of a computer tutoring software, in which different visualization tools including video clips, 3 dimensional models, drawings, pictures/photos together with complementary texts are used to assist students in deeply understanding and effectively mastering materials. The paper will also discuss the implementation and the effectiveness evaluation of the proposed tutoring software, which was used to teach a construction engineering management course offered at California State University, Long Beach.

Computer-generated video fly-through: an aid to visual impact assessment for windfarms

International Nuclear Information System (INIS)

Neilson, G.; Leeming, T.; Hall, S.

1998-01-01

Computer generated video fly-through provides a new method of assessing the visual impact of wind farms. With a PC, software and digital terrain model of the wind farm it is possible to produce videos ranging from wireframe to realistically shaded models. Using computer generated video fly-through visually sensitive corridors can be explored fully, wind turbine rotors can be seen in motion, critical viewpoints can be identified for photomontages and the context of the wind farm appreciated better. This paper describes the techniques of computer generated video fly through and examines its various applications in visual impact assessment of wind farms. (Author)

Virtual reality visualization of accelerator magnets

International Nuclear Information System (INIS)

Huang, M.; Papka, M.; DeFanti, T.; Kettunen, L.

1995-01-01

The authors describe the use of the CAVE virtual reality visualization environment as an aid to the design of accelerator magnets. They have modeled an elliptical multipole wiggler magnet being designed for use at the Advanced Photon Source at Argonne National Laboratory. The CAVE environment allows the authors to explore and interact with the 3-D visualization of the magnet. Capabilities include changing the number of periods the magnet displayed, changing the icons used for displaying the magnetic field, and changing the current in the electromagnet and observing the effect on the magnetic field and particle beam trajectory through the field

On Jovian plasma sheet structure

International Nuclear Information System (INIS)

Khurana, K.K.; Kivelson, M.G.

1989-01-01

The authors evaluate several models of Jovian plasma sheet structure by determining how well they organize several aspects of the observed Voyager 2 magnetic field characteristics as a function of Jovicentric radial distance. It is shown that in the local time sector of the Voyager 2 outbound pass (near 0300 LT) the published hinged-magnetodisc models with wave (i.e., models corrected for finite wave velocity effects) are more successful than the published magnetic anomaly model in predicting locations of current sheet crossings. They also consider the boundary between the plasma sheet and the magnetotail lobe which is expected to vary slowly with radial distance. They use this boundary location as a further test of the models of the magnetotail. They show that the compressional MHD waves have much smaller amplitude in the lobes than in the plasma sheet and use this criterion to refine the identification of the plasma-sheet-lobe boundary. When the locations of crossings into and out of the lobes are examined, it becomes evident that the magnetic-anomaly model yields a flaring plasma sheet with a halfwidth of ∼ 3 R J at a radial distance of 20 R J and ∼ 12 R J at a radial distance of 100 R J . The hinged-magnetodisc models with wave, on the other hand, predict a halfwidth of ∼ 3.5 R J independent of distance beyond 20 R J . New optimized versions of the two models locate both the current sheet crossings and lobe encounters equally successfully. The optimized hinged-magnetodisc model suggests that the wave velocity decreases with increasing radial distance. The optimized magnetic anomaly model yields lower velocity contrast than the model of Vasyliunas and Dessler (1981)

On the linear stability of sheared and magnetized jets without current sheets - relativistic case

Science.gov (United States)

Kim, Jinho; Balsara, Dinshaw S.; Lyutikov, Maxim; Komissarov, Serguei S.

2018-03-01

In our prior series of papers, we studied the non-relativistic and relativistic linear stability analysis of magnetized jets that do not have current sheets. In this paper, we extend our analysis to relativistic jets with a velocity shear and a similar current sheet free structure. The jets that we study are realistic because we include a velocity shear, a current sheet free magnetic structure, a relativistic velocity and a realistic thermal pressure so as to achieve overall pressure balance in the unperturbed jet. In order to parametrize the velocity shear, we apply a parabolic profile to the jets' 4-velocity. We find that the velocity shear significantly improves the stability of relativistic magnetized jets. This fact is completely consistent with our prior stability analysis of non-relativistic, sheared jets. The velocity shear mainly plays a role in stabilizing the short wavelength unstable modes for the pinch as well as the kink instability modes. In addition, it also stabilizes the long wavelength fundamental pinch instability mode. We also visualize the pressure fluctuations of each unstable mode to provide a better physical understanding of the enhanced stabilization by the velocity shear. Our overall conclusion is that combining velocity shear with a strong and realistic magnetic field makes relativistic jets even more stable.

Labeling and analysis of chicken taste buds using molecular markers in oral epithelial sheets.

Science.gov (United States)

Rajapaksha, Prasangi; Wang, Zhonghou; Venkatesan, Nandakumar; Tehrani, Kayvan F; Payne, Jason; Swetenburg, Raymond L; Kawabata, Fuminori; Tabata, Shoji; Mortensen, Luke J; Stice, Steven L; Beckstead, Robert; Liu, Hong-Xiang

2016-11-17

In chickens, the sensory organs for taste are the taste buds in the oral cavity, of which there are ~240-360 in total number as estimated by scanning electron microscopy (SEM). There is not an easy way to visualize all taste buds in chickens. Here, we report a highly efficient method for labeling chicken taste buds in oral epithelial sheets using the molecular markers Vimentin and α-Gustducin. Immediate tissue fixation following incubation with sub-epithelially injected proteases enabled us to peel off whole epithelial sheets, leaving the shape and integrity of the tissue intact. In the peeled epithelial sheets, taste buds labeled with antibodies against Vimentin and α-Gustducin were easily identified and counted under a light microscope and many more taste buds, patterned in rosette-like clusters, were found than previously reported with SEM. Broiler-type, female-line males have more taste buds than other groups and continue to increase the number of taste buds over stages after hatch. In addition to ovoid-shaped taste buds, big tube-shaped taste buds were observed in the chicken using 2-photon microscopy. Our protocol for labeling taste buds with molecular markers will factilitate future mechanistic studies on the development of chicken taste buds in association with their feeding behaviors.

Visual Inspection of the Flow Distribution Plate Bolts of a Nuclear Steam Generator

International Nuclear Information System (INIS)

Jeong, Woo Tae; Kim, Suk Tae; Sohn, Wook; Kang, Duk Won; Kang, Seok Chul

2007-01-01

To develop a system for visually inspecting the flow distribution plate (FDP) bolts of a nuclear steam generator, we reviewed several types of similar inspection equipment. The equipment which are currently available are mostly for inspecting lower part of a steam generator such as tube sheets and annulus except ELVS (Eggcrate Visual Inspection System). However, the design concept of ELVS could not be used for developing a device which enables the visual inspection of flow distribution plate bolts. Therefore, based on the current state of the art technology on the similar equipment, we conceptually designed a new inspection system for checking the FDP bolts

Rubella - Fact Sheet for Parents

Science.gov (United States)

... and 4 through 6 years Fact Sheet for Parents Color [2 pages] Español: Rubéola The best way ... according to the recommended schedule. Fact Sheets for Parents Diseases and the Vaccines that Prevent Them Chickenpox ...

Cell sheet technology and cell patterning for biofabrication

Energy Technology Data Exchange (ETDEWEB)

Hannachi, Imen Elloumi; Yamato, Masayuki; Okano, Teruo [Institute of Advanced Biomedical Engineering and Science, Tokyo Women' s Medical University, 8-1 Kawada-cho, Shinjuku, Tokyo (Japan)

2009-06-01

We have developed cell sheet technology as a modern method for the fabrication of functional tissue-like and organ-like structures. This technology allows for a sheet of interconnected cells and cells in full contact with their natural extracellular environment to be obtained. A cell sheet can be patterned and composed according to more than one cell type. The key technology of cell sheet engineering is that a fabricated cell sheet can be harvested and transplanted utilizing temperature-responsive surfaces. In this review, we summarize different aspects of cell sheet engineering and provide a survey of the application of cell sheets as a suitable material for biofabrication and clinics. Moreover, since cell micropatterning is a key tool for cell sheet engineering, in this review we focus on the introduction of our approaches to cell micropatterning and cell co-culture to the principles of automation and how they can be subjected to easy robotics programming. Finally, efforts towards making cell sheet technology suitable for biofabrication and robotic biofabrication are also summarized. (topical review)

Funding Sources for Visually Impaired Students in Higher Education.

Science.gov (United States)

Traber, M.

1987-01-01

Financial aid sources available to visually handicapped students for postsecondary educational, vocational, or technical programs are outlined. Sources include national and state blindness agencies, colleges and universities, state vocational rehabilitation agencies, and the federal government. (Author/JDD)

Visualizing Composite Data on the Lexis Surface

DEFF Research Database (Denmark)

Schöley, Jonas; Willekens, Frans

The analysis of composite data is a topic inherent to demography. In recent times, due to a growing catalogue of detailed population data, it became feasible to consider populations not only structured by time, age or sex, but by any number of interesting criteria. This “inflation” of data...... dimensions produces challenges in visualizing the data. To aid the understanding of age-structured timelines of compositions we seek to extend the Lexis surface plot from 1-dimensional continuous data to multidimensional composite data. We apply different strategies for visualizing composite data...

Auditory, Visual, and Auditory-Visual Perception of Emotions by Individuals with Cochlear Implants, Hearing Aids, and Normal Hearing

Science.gov (United States)

Most, Tova; Aviner, Chen

2009-01-01

This study evaluated the benefits of cochlear implant (CI) with regard to emotion perception of participants differing in their age of implantation, in comparison to hearing aid users and adolescents with normal hearing (NH). Emotion perception was examined by having the participants identify happiness, anger, surprise, sadness, fear, and disgust.…

iShoes for blind and visually impaired people

OpenAIRE

Assairi, Bandar; Holmes, Violeta

2013-01-01

This paper presents the development of an iShoes system for blind and visually impaired people. The iShoes system utilizes a microcontroller with sound output interfaced with ultrasonic sensors. The prototype system is designed to be specifically mounted on/in the shoes to aid navigation in urban routes. The ultrasonic transducers determine the range from an obstacle and then play an audio message to reflect the distance from the target. This system will assist blind and visually impaired peo...

Energy information sheets

Energy Technology Data Exchange (ETDEWEB)

1993-12-02

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the general public. Written for the general public, the EIA publication Energy Information Sheets was developed to provide information on various aspects of fuel production, prices, consumption and capability. The information contained herein pertains to energy data as of December 1991. Additional information on related subject matter can be found in other EIA publications as referenced at the end of each sheet.

Weld Repair of Thin Aluminum Sheet

Science.gov (United States)

Beuyukian, C. S.; Mitchell, M. J.

1986-01-01

Weld repairing of thin aluminum sheets now possible, using niobium shield and copper heat sinks. Refractory niobium shield protects aluminum adjacent to hole, while copper heat sinks help conduct heat away from repair site. Technique limits tungsten/inert-gas (TIG) welding bombardment zone to melt area, leaving surrounding areas around weld unaffected. Used successfully to repair aluminum cold plates on Space Shuttle, Commercial applications, especially in sealing fractures, dents, and holes in thin aluminum face sheets or clad brazing sheet in cold plates, heat exchangers, coolers, and Solar panels. While particularly suited to thin aluminum sheet, this process also used in thicker aluminum material to prevent surface damage near weld area.

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 01: forest structure and fire hazard overview

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Many managers and policymakers guided by the National Environmental Policy Act process want to understand the scientific principles on which they can base fuel treatments for reducing the size and severity of wildfires. These Forest Structure and Fire Hazard fact sheets discuss how to estimate fire hazard, how to visualize fuel treatments, and how the role of...

Modeling the Alzheimer Abeta17-42 fibril architecture: tight intermolecular sheet-sheet association and intramolecular hydrated cavities.

Science.gov (United States)

Zheng, Jie; Jang, Hyunbum; Ma, Buyong; Tsai, Chung-Jun; Nussinov, Ruth

2007-11-01

We investigate Abeta(17-42) protofibril structures in solution using molecular dynamics simulations. Recently, NMR and computations modeled the Abeta protofibril as a longitudinal stack of U-shaped molecules, creating an in-parallel beta-sheet and loop spine. Here we study the molecular architecture of the fibril formed by spine-spine association. We model in-register intermolecular beta-sheet-beta-sheet associations and study the consequences of Alzheimer's mutations (E22G, E22Q, E22K, and M35A) on the organization. We assess the structural stability and association force of Abeta oligomers with different sheet-sheet interfaces. Double-layered oligomers associating through the C-terminal-C-terminal interface are energetically more favorable than those with the N-terminal-N-terminal interface, although both interfaces exhibit high structural stability. The C-terminal-C-terminal interface is essentially stabilized by hydrophobic and van der Waals (shape complementarity via M35-M35 contacts) intermolecular interactions, whereas the N-terminal-N-terminal interface is stabilized by hydrophobic and electrostatic interactions. Hence, shape complementarity, or the "steric zipper" motif plays an important role in amyloid formation. On the other hand, the intramolecular Abeta beta-strand-loop-beta-strand U-shaped motif creates a hydrophobic cavity with a diameter of 6-7 A, allowing water molecules and ions to conduct through. The hydrated hydrophobic cavities may allow optimization of the sheet association and constitute a typical feature of fibrils, in addition to the tight sheet-sheet association. Thus, we propose that Abeta fiber architecture consists of alternating layers of tight packing and hydrated cavities running along the fibrillar axis, which might be possibly detected by high-resolution imaging.

Taste Bud Labeling in Whole Tongue Epithelial Sheet in Adult Mice.

Science.gov (United States)

Venkatesan, Nandakumar; Boggs, Kristin; Liu, Hong-Xiang

2016-04-01

Molecular labeling in whole-mount tissues provides an efficient way to obtain general information about the formation, maintenance, degeneration, and regeneration of many organs and tissues. However, labeling of lingual taste buds in whole tongue tissues in adult mice has been problematic because of the strong permeability barrier of the tongue epithelium. In this study, we present a simple method for labeling taste buds in the intact tongue epithelial sheet of an adult mouse. Following intralingual protease injection and incubation, immediate fixation of the tongue on mandible in 4% paraformaldehyde enabled the in situ shape of the tongue epithelium to be well maintained after peeling. The peeled epithelium was accessible to taste bud labeling with a pan-taste cell marker, keratin 8, and a type II taste cell marker, α-gustducin, in all three types of taste papillae, that is, fungiform, foliate, and circumvallate. Overnight incubation of tongue epithelial sheets with primary and secondary antibodies was sufficient for intense labeling of taste buds with both fluorescent and DAB visualizations. Labeled individual taste buds were easy to identify and quantify. This protocol provides an efficient way for phenotypic analyses of taste buds, especially regarding distribution pattern and number.

Developing a functioning visualization and analysis system for performance assessment

International Nuclear Information System (INIS)

Jones, M.L.

1992-01-01

Various commercial software packages and customized programs provide the ability to analyze and visualize the geology of Yucca Mountain. Starting with sparse, irregularly spaced data a series of gridded models has been developed representing the thermal/mechanical units within the mountain. Using computer aided design (CAD) software and scientific visualization software, the units can be manipulated, analyzed, and graphically displayed. The outputs are typically gridded terrain models, along with files of three-dimensional coordinates, distances, and other dimensional values. Contour maps, profiles, and shaded surfaces are the output for visualization

Work-Centered Design and Evaluation of a C2 Visualization Aid

National Research Council Canada - National Science Library

Roth, Emilie; Scott, Ronald; Kazmierczak, Tom; Whitaker, Randall; Stilson, Mona; Thomas-Meyers, Gina; Wampler, Jeffrey

2006-01-01

.... We have been developing and applying work-centered design and evaluation methodologies to design advanced visualization and support tools intended to more effectively support C2 cognitive and collaborative work...

Visual Hierarchy and Mind Motion in Advertising Design

Directory of Open Access Journals (Sweden)

Doaa Farouk Badawy Eldesouky

2013-06-01

Full Text Available Visual hierarchy is a significant concept in the field of advertising, a field that is dominated by effective communication, visual recognition and motion. Designers of advertisements have always been trying to organize the visual hierarchy throughout their advertising designs to aid the eye to recognize information in the desired order, to achieve the ultimate goals of clear perception and effectively delivering the advertising messages. However many assumptions and questions usually rise on how to create effective hierarchy throughout advertising designs and lead the eye and mind of the viewer in the most favorable way. This paper attempts to study visual hierarchy and mind motion in advertising designs and why it is important to develop visual paths when designing an advertisement. It explores the theory behind it, and how the very principles can be used to put these concepts into practice. The paper demonstrates some advertising samples applying visual hierarchy and mind motion in a representation of applying the basics and discussing the results.

Visual Hierarchy and Mind Motion in Advertising Design

Directory of Open Access Journals (Sweden)

Doaa Farouk Badawy Eldesouky

2013-06-01

Full Text Available Visual hierarchy is a significant concept in the field of advertising, a field that is dominated by effective communication, visual recognition and motion. Designers of advertisements have always been trying to organize the visual hierarchy throughout their advertising designs to aid the eye to recognize information in the desired order, to achieve the ultimate goals of clear perception and effectively delivering the advertising messages. However many assumptions and questions usually rise on how to create effective hierarchy throughout advertising designs and lead the eye and mind of the viewer in the most favorable way. This paper attempts to study visual hierarchy and mind motion in advertising designs and why it is important to develop visual paths when designing an advertisement. It explores the theory behind it, and how the very principles can be used to put these concepts into practice. The paper demonstrates some advertising samples applying visual hierarchy and mind motion in a representation of applying the basics and discussing the results. 

Computer–Aided Design of the Critical Speed of Shafts | Akpobi ...

African Journals Online (AJOL)

A computer aided design software for the analysis of the critical speed of shaft, is developed and presented in this work. The software was designed using the principles of object oriented programming, and implemented with the Microsoft Visual Basic Language. The package was tested on a number of benchmark design ...

Sheet pinch devices

International Nuclear Information System (INIS)

Anderson, O.A.; Baker, W.R.; Ise, J. Jr.; Kunkel, W.B.; Pyle, R.V.; Stone, J.M.

1958-01-01

Three types of sheet-like discharges are being studied at Berkeley. The first of these, which has been given the name 'Triax', consists of a cylindrical plasma sleeve contained between two coaxial conducting cylinders A theoretical analysis of the stability of the cylindrical sheet plasma predicts the existence of a 'sausage-mode' instability which is, however, expected to grow more slowly than in the case of the unstabilized linear pinch (by the ratio of the radial dimensions). The second pinch device employs a disk shaped discharge with radial current guided between flat metal plates, this configuration being identical to that of the flat hydromagnetic capacitor without external magnetic field. A significant feature of these configurations is the absence of a plasma edge, i.e., there are no regions of sharply curved magnetic field lines anywhere in these discharges. The importance of this fact for stability is not yet fully investigated theoretically. As a third configuration a rectangular, flat pinch tube has been constructed, and the behaviour of a flat plasma sheet with edges is being studied experimentally

Knowledge scaffolding visualizations: A guiding framework

Directory of Open Access Journals (Sweden)

Elitsa Alexander

2015-06-01

Full Text Available In this paper we provide a guiding framework for understanding and selecting visual representations in the knowledge management (KM practice. We build on an interdisciplinary analogy between two connotations of the notion of “scaffolding”: physical scaffolding from an architectural-engineering perspective and scaffolding of the “everyday knowing in practice” from a KM perspective. We classify visual structures for knowledge communication in teams into four types of scaffolds: grounded (corresponding e.g., to perspectives diagrams or dynamic facilitation diagrams, suspended (e.g., negotiation sketches, argument maps, panel (e.g., roadmaps or timelines and reinforcing (e.g., concept diagrams. The article concludes with a set of recommendations in the form of questions to ask whenever practitioners are choosing visualizations for specific KM needs. Our recommendations aim at providing a framework at a broad-brush level to aid choosing a suitable visualization template depending on the type of KM endeavour.

A theory-informed approach to developing visually mediated interventions to change behaviour using an asthma and physical activity intervention exemplar.

Science.gov (United States)

Murray, Jennifer; Williams, Brian; Hoskins, Gaylor; Skar, Silje; McGhee, John; Treweek, Shaun; Sniehotta, Falko F; Sheikh, Aziz; Brown, Gordon; Hagen, Suzanne; Cameron, Linda; Jones, Claire; Gauld, Dylan

2016-01-01

Visualisation techniques are used in a range of healthcare interventions. However, these frequently lack a coherent rationale or clear theoretical basis. This lack of definition and explicit targeting of the underlying mechanisms may impede the success of and evaluation of the intervention. We describe the theoretical development, deployment, and pilot evaluation, of a complex visually mediated behavioural intervention. The exemplar intervention focused on increasing physical activity among young people with asthma. We employed an explicit five-stage development model, which was actively supported by a consultative user group. The developmental stages involved establishing the theoretical basis, establishing a narrative structure, visual rendering, checking interpretation, and pilot testing. We conducted in-depth interviews and focus groups during early development and checking, followed by an online experiment for pilot testing. A total of 91 individuals, including young people with asthma, parents, teachers, and health professionals, were involved in development and testing. Our final intervention consisted of two components: (1) an interactive 3D computer animation to create intentions and (2) an action plan and volitional help sheet to promote the translation of intentions to behaviour. Theory was mediated throughout by visual and audio forms. The intervention was regarded as highly acceptable, engaging, and meaningful by all stakeholders. The perceived impact on asthma understanding and intentions was reported positively, with most individuals saying that the 3D computer animation had either clarified a range of issues or made them more real. Our five-stage model underpinned by extensive consultation worked well and is presented as a framework to support explicit decision-making for others developing theory informed visually mediated interventions. We have demonstrated the ability to develop theory-based visually mediated behavioural interventions. However

Stability of medicines after repackaging into multicompartment compliance aids: eight criteria for detection of visual alteration.

Science.gov (United States)

Albert, Valerie; Lanz, Michael; Imanidis, Georgios; Hersberger, Kurt E; Arnet, Isabelle

2017-01-01

Multicompartment compliance aids (MCA) are widely used by patients. They support the management of medication and reduce unintentional nonadherence. MCA are filled with medicines unpacked from their original packaging. Swiss pharmacists currently provide MCA for 1-2 weeks, although little and controversial information exists on the stability of repackaged medicines. We aimed to validate the usefulness of a simple screening method capable of detecting visual stability problems with repackaged medicines. We selected eight criteria for solid formulations from The International Pharmacopoeia : (1) rough surface, (2) chipping, (3) cracking, (4) capping, (5) mottling, (6) discoloration, (7) swelling, and (8) crushing. A selection of 24 critical medicines was repackaged in three different MCA (Pharmis ® , SureMed™, and self-produced blister) and stored at room temperature for 4 weeks. Pharmis ® was additionally stored at accelerated conditions. Appearance was scored weekly. Six alterations (rough surface, cracking, mottling, discoloration, swelling, and crushing) were observed at accelerated conditions. No alteration was observed at room temperature, except for the chipping of tablets that had been stuck to cold seal glue. The eight criteria can detect alterations of the appearance of oral solid medicines repackaged in MCA. In the absence of specific guidelines, they can serve as a simple screening method in community pharmacies for identifying medicines unsuitable for repackaging.

Effect of Cell Sheet Manipulation Techniques on the Expression of Collagen Type II and Stress Fiber Formation in Human Chondrocyte Sheets.

Science.gov (United States)

Wongin, Sopita; Waikakul, Saranatra; Chotiyarnwong, Pojchong; Siriwatwechakul, Wanwipa; Viravaidya-Pasuwat, Kwanchanok

2018-03-01

Cell sheet technology is applied to human articular chondrocytes to construct a tissue-like structure as an alternative treatment for cartilage defect. The effect of a gelatin manipulator, as a cell sheet transfer system, on the quality of the chondrocyte sheets was investigated. The changes of important chondrogenic markers and stress fibers, resulting from the cell sheet manipulation, were also studied. The chondrocyte cell sheets were constructed with patient-derived chondrocytes using a temperature-responsive polymer and a gelatin manipulator as a transfer carrier. The properties of the cell sheets, including sizes, expression levels of collagen type II and I, and the localization of the stress fibers, were assessed and compared with those of the cell sheets harvested without the gelatin manipulator. Using the gelatin manipulator, the original size of the chondrocyte cell sheets was retained with abundant stress fibers, but with a decrease in the expression of collagen type II. Without the gelatin manipulator, although the cell shrinkage occurred, the cell sheet with suppressed stress fiber formation showed significantly higher levels of collagen type II. These results support our observations that stress fiber formation in chondrocyte cell sheets affected the production of chondrogenic markers. These densely packed tissue-like structures possessed a good chondrogenic activity, indicating their potential for use in autologous chondrocyte implantation to treat cartilage defects.

Settlement during vibratory sheet piling

NARCIS (Netherlands)

Meijers, P.

2007-01-01

During vibratory sheet piling quite often the soil near the sheet pile wall will settle. In many cases this is not a problem. For situations with houses, pipelines, roads or railroads at relative short distance these settlements may not be acceptable. The purpose of the research described in this

49 CFR 1243.2 - Condensed balance sheet.

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Condensed balance sheet. 1243.2 Section 1243.2... § 1243.2 Condensed balance sheet. Commencing with reports for the 3 months beginning January 1, 1972, and... hereby, required to compile and file quarterly reports of balance sheet items in accordance with...

VISUAL3D - An EIT network on visualization of geomodels

Science.gov (United States)

Bauer, Tobias

2017-04-01

When it comes to interpretation of data and understanding of deep geological structures and bodies at different scales then modelling tools and modelling experience is vital for deep exploration. Geomodelling provides a platform for integration of different types of data, including new kinds of information (e.g., new improved measuring methods). EIT Raw Materials, initiated by the EIT (European Institute of Innovation and Technology) and funded by the European Commission, is the largest and strongest consortium in the raw materials sector worldwide. The VISUAL3D network of infrastructure is an initiative by EIT Raw Materials and aims at bringing together partners with 3D-4D-visualisation infrastructure and 3D-4D-modelling experience. The recently formed network collaboration interlinks hardware, software and expert knowledge in modelling visualization and output. A special focus will be the linking of research, education and industry and integrating multi-disciplinary data and to visualize the data in three and four dimensions. By aiding network collaborations we aim at improving the combination of geomodels with differing file formats and data characteristics. This will create an increased competency in modelling visualization and the ability to interchange and communicate models more easily. By combining knowledge and experience in geomodelling with expertise in Virtual Reality visualization partners of EIT Raw Materials but also external parties will have the possibility to visualize, analyze and validate their geomodels in immersive VR-environments. The current network combines partners from universities, research institutes, geological surveys and industry with a strong background in geological 3D-modelling and 3D visualization and comprises: Luleå University of Technology, Geological Survey of Finland, Geological Survey of Denmark and Greenland, TUBA Freiberg, Uppsala University, Geological Survey of France, RWTH Aachen, DMT, KGHM Cuprum, Boliden, Montan

Electron energization in the geomagnetic tail current sheet

International Nuclear Information System (INIS)

Lyons, L.R.

1984-01-01

Electron motion in the distant tail current sheet is evaluated and found to violate the guiding center approximation at energies > or approx. =100 eV. Most electrons within the energy range approx.10 -1 -10 2 keV that enter the current sheet become trapped within the magnetic field reversal region. These electrons then convect earthward and gain energy from the cross-tail electric field. If the energy spectrum of electrons entering the current sheet is similar to that of electrons from the boundary layer surrounding the magnetotail, the energy gain from the electric field produces electron energy spectra comparable to those observed in the earth's plasma sheet. Thus current sheet interactions can be a significant source of particles and energy for plasma sheet electrons as well as for plasma sheet ions. A small fraction of electrons within the current sheet has its pitch angles scattered so as to be ejected from the current sheet within the atmospheric loss cone. These electrons can account for the electron precipitation near the high-latitude boundary of energetic electrons, which is approximately isotropic in pitch angle up to at least several hundred keV. Current sheet interaction should cause approximately isotropic auroral precipitation up to several hundred keV energies, which extends to significantly lower latitudes for ions than for electrons in agreement with low-altitude satellite observations. Electron precipitation associated with diffuse aurora generally has a transition at 1-10 keV to anisotropic pitch angle distributions. Such electron precipitation cannot be explained by current sheet interactions, but it can be explained by pitch angle diffusion driven by plasma turbulence

Bessel light sheet structured illumination microscopy

Science.gov (United States)

Noshirvani Allahabadi, Golchehr

Biomedical study researchers using animals to model disease and treatment need fast, deep, noninvasive, and inexpensive multi-channel imaging methods. Traditional fluorescence microscopy meets those criteria to an extent. Specifically, two-photon and confocal microscopy, the two most commonly used methods, are limited in penetration depth, cost, resolution, and field of view. In addition, two-photon microscopy has limited ability in multi-channel imaging. Light sheet microscopy, a fast developing 3D fluorescence imaging method, offers attractive advantages over traditional two-photon and confocal microscopy. Light sheet microscopy is much more applicable for in vivo 3D time-lapsed imaging, owing to its selective illumination of tissue layer, superior speed, low light exposure, high penetration depth, and low levels of photobleaching. However, standard light sheet microscopy using Gaussian beam excitation has two main disadvantages: 1) the field of view (FOV) of light sheet microscopy is limited by the depth of focus of the Gaussian beam. 2) Light-sheet images can be degraded by scattering, which limits the penetration of the excitation beam and blurs emission images in deep tissue layers. While two-sided sheet illumination, which doubles the field of view by illuminating the sample from opposite sides, offers a potential solution, the technique adds complexity and cost to the imaging system. We investigate a new technique to address these limitations: Bessel light sheet microscopy in combination with incoherent nonlinear Structured Illumination Microscopy (SIM). Results demonstrate that, at visible wavelengths, Bessel excitation penetrates up to 250 microns deep in the scattering media with single-side illumination. Bessel light sheet microscope achieves confocal level resolution at a lateral resolution of 0.3 micron and an axial resolution of 1 micron. Incoherent nonlinear SIM further reduces the diffused background in Bessel light sheet images, resulting in

Magnetic configurations of the tilted current sheets in magnetotail

Directory of Open Access Journals (Sweden)

C. Shen

2008-11-01

Full Text Available In this research, the geometrical structures of tilted current sheet and tail flapping waves have been analysed based on multiple spacecraft measurements and some features of the tilted current sheets have been made clear for the first time. The geometrical features of the tilted current sheet revealed in this investigation are as follows: (1 The magnetic field lines (MFLs in the tilted current sheet are generally plane curves and the osculating planes in which the MFLs lie are about vertical to the equatorial plane, while the normal of the tilted current sheet leans severely to the dawn or dusk side. (2 The tilted current sheet may become very thin, the half thickness of its neutral sheet is generally much less than the minimum radius of the curvature of the MFLs. (3 In the neutral sheet, the field-aligned current density becomes very large and has a maximum value at the center of the current sheet. (4 In some cases, the current density is a bifurcated one, and the two humps of the current density often superpose two peaks in the gradient of magnetic strength, indicating that the magnetic gradient drift current is possibly responsible for the formation of the two humps of the current density in some tilted current sheets. Tilted current sheets often appear along with tail current sheet flapping waves. It is found that, in the tail flapping current sheets, the minimum curvature radius of the MFLs in the current sheet is rather large with values around 1 RE, while the neutral sheet may be very thin, with its half thickness being several tenths of RE. During the flapping waves, the current sheet is tilted substantially, and the maximum tilt angle is generally larger than 45°. The phase velocities of these flapping waves are several tens km/s, while their periods and wavelengths are several tens of minutes, and several earth radii, respectively. These tail flapping events generally last several hours and occur during quiet periods or periods of

Relativistic current sheets in electron-positron plasmas

International Nuclear Information System (INIS)

Zenitani, S.

2008-01-01

The current sheet structure with magnetic field reversal is one of the fundamental structure in space and astrophysical plasmas. It draws recent attention in high-energy astrophysical settings, where relativistic electron-positron plasmas are considered. In this talk we will review the recent progress of the physical processes in the relativistic current sheet. The kinetic stability of a single current sheet, the nonlinear behavior of these instabilities, and recent challenges on the multi current sheet systems are introduced. We will also introduce some problems of magnetic reconnection in these relativistic environments. (author)

Tube sheet design for PFBR steam generator

International Nuclear Information System (INIS)

Chellapandi, P.; Chetal, S.C.; Bhoje, S.B.

1991-01-01

Top and bottom tube sheets of PFBR Steam Generators have been analysed with 3D and axisymmetric models using CASTEM Programs. Analysis indicates that the effects of piping reactions at the inlet/outlet nozzles on the primary stresses in the tube sheets are negligible and the asymmetricity of the deformation pattern introduced in the tube sheet by the presence of inlet/outlet and manhole nozzles is insignificant. The minimum tube sheet thicknesses for evaporator and reheater are 135 mm and 75 mm respectively. Further analysis has indicated the minimum fillet radius at the junction of tube sheet and dished end should be 20 mm. Simplified methodology has been developed to arrive at the number of thermal baffles required to protect the tube sheet against fatigue damage due to thermal transient. This method has been applied to PFBR steam generators to determine the required number of thermal baffles. For protecting the bottom tube sheet of evaporator against the thermal shock due to feed water and secondary pump trip, one thermal shield is found to be sufficient. Further analysis is required to decide upon the actual number to take care of the severe thermal transient, following the event of sudden dumping of water/steam, immediately after the sodium-water reaction. (author)

17 CFR 210.5-02 - Balance sheets.

Science.gov (United States)

2010-04-01

... customers at the date of the balance sheet. Include a general description of the prerequisites for billing... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Balance sheets. 210.5-02... Balance sheets. The purpose of this rule is to indicate the various line items and certain additional...

From cyclic ice streaming to Heinrich-like events: the grow-and-surge instability in the Parallel Ice Sheet Model

Directory of Open Access Journals (Sweden)

J. Feldmann

2017-08-01

Full Text Available >Here we report on a cyclic, physical ice-discharge instability in the Parallel Ice Sheet Model, simulating the flow of a three-dimensional, inherently buttressed ice-sheet-shelf system which periodically surges on a millennial timescale. The thermomechanically coupled model on 1 km horizontal resolution includes an enthalpy-based formulation of the thermodynamics, a nonlinear stress-balance-based sliding law and a very simple subglacial hydrology. The simulated unforced surging is characterized by rapid ice streaming through a bed trough, resulting in abrupt discharge of ice across the grounding line which is eventually calved into the ocean. We visualize the central feedbacks that dominate the subsequent phases of ice buildup, surge and stabilization which emerge from the interaction between ice dynamics, thermodynamics and the subglacial till layer. Results from the variation of surface mass balance and basal roughness suggest that ice sheets of medium thickness may be more susceptible to surging than relatively thin or thick ones for which the surge feedback loop is damped. We also investigate the influence of different basal sliding laws (ranging from purely plastic to nonlinear to linear on possible surging. The presented mechanisms underlying our simulations of self-maintained, periodic ice growth and destabilization may play a role in large-scale ice-sheet surging, such as the surging of the Laurentide Ice Sheet, which is associated with Heinrich events, and ice-stream shutdown and reactivation, such as observed in the Siple Coast region of West Antarctica.

Pressure balance between lobe and plasma sheet

International Nuclear Information System (INIS)

Baumjohann, W.; Paschmann, G.; Luehr, H.

1990-01-01

Using eight months of AMPTE/IRM plasma and magnetic field data, the authors have done a statistical survey on the balance of total (thermal and magnetic) pressure in the Earth's plasma sheet and tail lobe. About 300,000 measurements obtained in the plasma sheet and the lobe were compared for different levels of magnetic activity as well as different distances from the Earth. The data show that lobe and plasma sheet pressure balance very well. Even in the worst case they do not deviate by more than half of the variance in the data itself. Approximately constant total pressure was also seen during a quiet time pass when IRM traversed nearly the whole magnetotail in the vertical direction, from the southern hemisphere lobe through the neutral sheet and into the northern plasma sheet boundary layer

Measuring the Influence of Galilean Loupe System on Near Visual Acuity of Dentists under Simulated Clinical Conditions

Directory of Open Access Journals (Sweden)

Iris Urlić

2016-01-01

Full Text Available Aim: The purpose of this study was to compare near visual acuity of dentists without optical aids (VSC with near visual acuity of those using the Galilean telescope system (VGA2 with magnification of x 2.5, and the distance of 350 mm in simulated clinical conditions. Methods: The study included 46 dentists (visual acuity 1.0 without correction. A visual acuity testing was carried out using a miniaturized Snellen visual acuity chart which was placed in the cavity of molar teeth mounted in a phantom head in simulated clinical conditions. Near visual acuity for the vicinity was examined: 1 without correction at a distance of 300-400 mm (VSC; 2 with Galilean loupes with magnification of x2.5, focal length of 350mm. Results: The distributions of near visual acuity recorded using VSC and VGA2, 5 systems were compared by the Wilcoxon Signed Rank test. The results obtained by Wilcoxon Signed Rank test pointed to a statistically significant difference in the distribution of recorded visual acuity between the VSC and VGA2 optical systems (W = - 403.5; p <0.001. Conclusion: If using the VGA2, 5 systems, higher values of the near visual acuity were recorded and subsequently compared to near visual acuity without magnifying aids (VSC.

Microreact: visualizing and sharing data for genomic epidemiology and phylogeography.

Science.gov (United States)

Argimón, Silvia; Abudahab, Khalil; Goater, Richard J E; Fedosejev, Artemij; Bhai, Jyothish; Glasner, Corinna; Feil, Edward J; Holden, Matthew T G; Yeats, Corin A; Grundmann, Hajo; Spratt, Brian G; Aanensen, David M

2016-11-01

Visualization is frequently used to aid our interpretation of complex datasets. Within microbial genomics, visualizing the relationships between multiple genomes as a tree provides a framework onto which associated data (geographical, temporal, phenotypic and epidemiological) are added to generate hypotheses and to explore the dynamics of the system under investigation. Selected static images are then used within publications to highlight the key findings to a wider audience. However, these images are a very inadequate way of exploring and interpreting the richness of the data. There is, therefore, a need for flexible, interactive software that presents the population genomic outputs and associated data in a user-friendly manner for a wide range of end users, from trained bioinformaticians to front-line epidemiologists and health workers. Here, we present Microreact, a web application for the easy visualization of datasets consisting of any combination of trees, geographical, temporal and associated metadata. Data files can be uploaded to Microreact directly via the web browser or by linking to their location (e.g. from Google Drive/Dropbox or via API), and an integrated visualization via trees, maps, timelines and tables provides interactive querying of the data. The visualization can be shared as a permanent web link among collaborators, or embedded within publications to enable readers to explore and download the data. Microreact can act as an end point for any tool or bioinformatic pipeline that ultimately generates a tree, and provides a simple, yet powerful, visualization method that will aid research and discovery and the open sharing of datasets.

Thermomechanical processing of plasma sprayed intermetallic sheets

Science.gov (United States)

Hajaligol, Mohammad R.; Scorey, Clive; Sikka, Vinod K.; Deevi, Seetharama C.; Fleischhauer, Grier; Lilly, Jr., A. Clifton; German, Randall M.

2001-01-01

A powder metallurgical process of preparing a sheet from a powder having an intermetallic alloy composition such as an iron, nickel or titanium aluminide. The sheet can be manufactured into electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 4 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.0.05% Zr .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Ni, .ltoreq.0.75% C, .ltoreq.0.1% B, .ltoreq.1% submicron oxide particles and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, and/or .ltoreq.3% Cu. The process includes forming a non-densified metal sheet by consolidating a powder having an intermetallic alloy composition such as by roll compaction, tape casting or plasma spraying, forming a cold rolled sheet by cold rolling the non-densified metal sheet so as to increase the density and reduce the thickness thereof and annealing the cold rolled sheet. The powder can be a water, polymer or gas atomized powder which is subjecting to sieving and/or blending with a binder prior to the consolidation step. After the consolidation step, the sheet can be partially sintered. The cold rolling and/or annealing steps can be repeated to achieve the desired sheet thickness and properties. The annealing can be carried out in a vacuum furnace with a vacuum or inert atmosphere. During final annealing, the cold rolled sheet recrystallizes to an average grain size of about 10 to 30 .mu.m. Final stress relief annealing can be carried out in the B2 phase temperature range.

17 CFR 210.7-03 - Balance sheets.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Balance sheets. 210.7-03... 1940, AND ENERGY POLICY AND CONSERVATION ACT OF 1975 Insurance Companies § 210.7-03 Balance sheets. (a... otherwise permitted by the Commission, should appear on the face of the balance sheets and in the notes...

Disposal sheet for preventing scattering of radioactive contaminated material

International Nuclear Information System (INIS)

Miyasaka, Shun-ichi; Kurioka, Hitoshi; Nakamura, Kenjiro.

1990-01-01

Upon disposal of vinyl sheets at the final stage of dismantling operation for nuclear buildings, etc., radioactive contaminated materials caused by cutting concretes, etc. remain on the sheets. In view of the above, members capable of restoring original shape due to the temperature difference are attached to the sheet main body so that the sheet main body may be folded into a bag-like shape. Since the members as described above are bent upon temperature elevation in the sheets, the sheet main body is pulled by the members and then spontaneously folded into a bag-like shape. As a result, the radioactive contaminated materials remaining on the sheets are wrapped into the sheet main body free from touch to operator's hands or without scattering to the surrounding. This can prevent operator's external and internal exposure. (T.M.)

Visualizing request-flow comparison to aid performance diagnosis in distributed systems.

Science.gov (United States)

Sambasivan, Raja R; Shafer, Ilari; Mazurek, Michelle L; Ganger, Gregory R

2013-12-01

Distributed systems are complex to develop and administer, and performance problem diagnosis is particularly challenging. When performance degrades, the problem might be in any of the system's many components or could be a result of poor interactions among them. Recent research efforts have created tools that automatically localize the problem to a small number of potential culprits, but research is needed to understand what visualization techniques work best for helping distributed systems developers understand and explore their results. This paper compares the relative merits of three well-known visualization approaches (side-by-side, diff, and animation) in the context of presenting the results of one proven automated localization technique called request-flow comparison. Via a 26-person user study, which included real distributed systems developers, we identify the unique benefits that each approach provides for different problem types and usage modes.

Single Point Incremental Forming using a Dummy Sheet

DEFF Research Database (Denmark)

Skjødt, Martin; Silva, Beatriz; Bay, Niels

2007-01-01

A new version of single point incremental forming (SPIF) is presented. This version includes a dummy sheet on top of the work piece, thus forming two sheets instead of one. The dummy sheet, which is in contact with the rotating tool pin, is discarded after forming. The new set-up influences....... The possible influence of friction between the two sheets is furthermore investigated. The results show that the use of a dummy sheet reduces wear of the work piece to almost zero, but also causes a decrease in formability. Bulging of the planar sides of the pyramid is reduced and surface roughness...

Social care and support needs of community-dwelling people with dementia and concurrent visual impairment.

Science.gov (United States)

Nyman, Samuel Robert; Innes, Anthea; Heward, Michelle

2017-09-01

This study explored the social care and support needs of people with dementia and visual impairment, and the barriers and facilitators for meeting these needs. Twenty-six semi-structured interviews were conducted: 21 joint and 5 individual interviews with the person with dementia and visual impairment (n=4) or their family/paid carer (n=1). Interviews were analysed thematically. Three themes are presented. (1) Social care needs: having dementia can reduce an individual's ability to cope with their visual impairment, and lead to increased dependency and reduced daily stimulation. (2) Barriers to using technology to meet social care needs: difficulties were reported with learning to use unfamiliar technology and the cost of visual impairment aids, and for some, the presence of dementia made visual impairment aids unusable and vice versa. (3) Familiarity as a facilitator for meeting social care needs: living at home or taking furnishings and ornaments into a new home facilitated independence, and continuity of paid carers/volunteers facilitated the caring relationship between the individual and staff/volunteer. Care workers will better serve older people if they are aware of the social care and support needs that arise from having both dementia and visual impairment.

Neutron spatial distribution measurement with 6Li-contained thermoluminescent sheets

International Nuclear Information System (INIS)

Konnai, A.; Odano, N.; Sawamura, H.; Ozasa, N.; Ishikawa, Y.

2006-01-01

We have been developing a thermoluminescent (TL) sheet for photon dosimetry (TL sheet) with thermoluminescent material of LiF:Mg, Cu, P and a co-polymer of ethylene and tetrafluoroethylene. For the purpose of a development of simple method for neutron spatial distribution measurement, TL sheet for neutron detection (NTL sheet) is made by adding 94.7% enriched 6 LiF to TL sheet. TL material in TL sheet is directly excited by ionizing radiation whereas, in the case of neutron detection, TL material in NTL sheet is indirectly excited by neutron capture reaction. That is neutron distribution can be obtained with TL caused by α particle from 6 Li(n, α) 3 H reaction. Responses of NTL sheets to neutrons were examined at the neutron beam irradiation facility for Boron Neutron Capture Therapy (BNCT) in JRR-4 research reactor in Japan Atomic Energy Agency. TL and NTL sheets were exposed to striped and roundly distributed neutron fields. Attenuations of neutron flux in air and water were also observed using NTL sheets. TL sheets were also exposed on the same conditions and compared with NTL sheets. TL intensity ratios of NTL sheet to TL sheet were consistent with the calculated value from 6 Li content. Thermal neutron attenuation observed by NTL sheet also corresponded with the result measured by Au wire radioactivation and TLD chips, which were currently used in BNCT at JRR-4. These results were analyzed with by Monte Carlo simulation. The present results indicated that NTL sheet is applicable to measurement of neutron spatial distribution. (author)

Visualizing the Quality of Vectur Features - a Proposal for Cadastral Maps

Science.gov (United States)

Navratil, G.; Leopoldseder, V.

2017-09-01

A well-known problem of geographical information is the communication of the quality level. It can be either done verbally / numerically or it can be done graphically. The graphical form is especially useful if the quality has a spatial variation because the spatial distribution is visualized as well. The problem of spatial variation of quality is an issue for cadastral maps. Non-experts cannot determine the quality at a specific location. Therefore a visual representation was tested for the Austrian cadastre. A map sheet was redesigned to give some indication of cadastral quality and presented to both experts and non-experts. The paper presents the result of the interviews.

Phishing Detection: Analysis of Visual Similarity Based Approaches

Directory of Open Access Journals (Sweden)

Ankit Kumar Jain

2017-01-01

Full Text Available Phishing is one of the major problems faced by cyber-world and leads to financial losses for both industries and individuals. Detection of phishing attack with high accuracy has always been a challenging issue. At present, visual similarities based techniques are very useful for detecting phishing websites efficiently. Phishing website looks very similar in appearance to its corresponding legitimate website to deceive users into believing that they are browsing the correct website. Visual similarity based phishing detection techniques utilise the feature set like text content, text format, HTML tags, Cascading Style Sheet (CSS, image, and so forth, to make the decision. These approaches compare the suspicious website with the corresponding legitimate website by using various features and if the similarity is greater than the predefined threshold value then it is declared phishing. This paper presents a comprehensive analysis of phishing attacks, their exploitation, some of the recent visual similarity based approaches for phishing detection, and its comparative study. Our survey provides a better understanding of the problem, current solution space, and scope of future research to deal with phishing attacks efficiently using visual similarity based approaches.

Balance Sheets Versus Decision Dashboards to Support Patient Treatment Choices: A Comparative Analysis.

Science.gov (United States)

Dolan, James G; Veazie, Peter J

2015-12-01

Growing recognition of the importance of involving patients in preference-driven healthcare decisions has highlighted the need to develop practical strategies to implement patient-centered shared decision-making. The use of tabular balance sheets to support clinical decision-making is well established. More recent evidence suggests that graphic, interactive decision dashboards can help people derive deeper a understanding of information within a specific decision context. We therefore conducted a non-randomized trial comparing the effects of adding an interactive dashboard to a static tabular balance sheet on patient decision-making. The study population consisted of members of the ResearchMatch registry who volunteered to participate in a study of medical decision-making. Two separate surveys were conducted: one in the control group and one in the intervention group. All participants were instructed to imagine they were newly diagnosed with a chronic illness and were asked to choose between three hypothetical drug treatments, which varied with regard to effectiveness, side effects, and out-of-pocket cost. Both groups made an initial treatment choice after reviewing a balance sheet. After a brief "washout" period, members of the control group made a second treatment choice after reviewing the balance sheet again, while intervention group members made a second treatment choice after reviewing an interactive decision dashboard containing the same information. After both choices, participants rated their degree of confidence in their choice on a 1 to 10 scale. Members of the dashboard intervention group were more likely to change their choice of preferred drug (10.2 versus 7.5%; p = 0.054) and had a larger increase in decision confidence than the control group (0.67 versus 0.075; p < 0.03). There were no statistically significant between-group differences in decisional conflict or decision aid acceptability. These findings suggest that clinical decision dashboards may

Teaching Neuroanatomy Using Computer-Aided Learning: What Makes for Successful Outcomes?

Science.gov (United States)

Svirko, Elena; Mellanby, Jane

2017-01-01

Computer-aided learning (CAL) is an integral part of many medical courses. The neuroscience course at Oxford University for medical students includes CAL course of neuroanatomy. CAL is particularly suited to this since neuroanatomy requires much detailed three-dimensional visualization, which can be presented on screen. The CAL course was…

AIDS cannot be an exception to offer of lower bus fares.

Science.gov (United States)

1997-11-28

U.S. District Judge Joe Billy McDade ruled that the Metro Link bus system of Rock Island, IL cannot exclude people with AIDS from a special rate program afforded to those with mobility, visual, or hearing impairments. The suit was brought by the American Civil Liberties Union on behalf of [name removed] who wished to obtain a reduced-fare card because his AIDS condition severely impaired his ability to walk. Metro Link's application for reduced fare explicitly states that those whose sole disability is AIDS are ineligible for the program. Judge McDade ruled that the application violates the American Disabilities Act (ADA) and the Rehabilitation Act because it discriminated against [name removed] exclusively because of his disability. The policy also violated [name removed]'s right to equal protection under the 14th Amendment.

Is a picture worth a thousand words? The interaction of visual display and attribute representation in attenuating framing bias}

OpenAIRE

Eyal Gamliel; Hamutal Kreiner

2013-01-01

The attribute framing bias is a well-established phenomenon, in which an object or an event is evaluated more favorably when presented in a positive frame such as ``the half full glass'' than when presented in the complementary negative framing. Given that previous research showed that visual aids can attenuate this bias, the current research explores the factors underlying the attenuating effect of visual aids. In a series of three experiments, we examined how attribute framing bias is affec...

On the possible eigenoscillations of neutral sheets

International Nuclear Information System (INIS)

Almeida, W.A.; Costa, J.M. da; Aruquipa, E.G.; Sudano, J.P.

1974-12-01

A neutral sheet model with hyperbolic tangent equilibrium magnetic field and hyperbolic square secant density profiles is considered. It is shown that the equation for small oscillations takes the form of an eigenvalue oscillation problem. Computed eigenfrequencies of the geomagnetic neutral sheet were found to be in the range of the resonant frequencies of the geomagnetic plasma sheet computed by other authors

Uranium mining sites - Thematic sheets

International Nuclear Information System (INIS)

2009-01-01

A first sheet proposes comments, data and key numbers about uranium extraction in France: general overview of uranium mining sites, status of waste rock and tailings after exploitation, site rehabilitation. The second sheet addresses the sources of exposure to ionizing radiations due to ancient uranium mining sites: discussion on the identification of these sources associated with these sites, properly due to mining activities or to tailings, or due to the transfer of radioactive substances towards water and to the contamination of sediments, description of the practice and assessment of radiological control of mining sites. A third sheet addresses the radiological exposure of public to waste rocks, and the dose assessment according to exposure scenarios: main exposure ways to be considered, studied exposure scenarios (passage on backfilled path and grounds, stay in buildings built on waste rocks, keeping mineralogical samples at home). The fourth sheet addresses research programmes of the IRSN on uranium and radon: epidemiological studies (performed on mine workers; on French and on European cohorts, French and European studies on the risk of lung cancer associated with radon in housing), study of the biological effects of chronic exposures. The last sheet addresses studies and expertises performed by the IRSN on ancient uranium mining sites in France: studies commissioned by public authorities, radioactivity control studies performed by the IRSN about mining sites, participation of the IRSN to actions to promote openness to civil society

Sheet, ligament and droplet formation in swirling primary atomization

Directory of Open Access Journals (Sweden)

Changxiao Shao

2018-04-01

Full Text Available We report direct numerical simulations of swirling liquid atomization to understand the physical mechanism underlying the sheet breakup of a non-turbulent liquid swirling jet which lacks in-depth investigation. The volume-of-fluid (VOF method coupled with adapted mesh refinement (AMR technique in GERRIS code is employed in the present simulation. The mechanisms of sheet, ligament and droplet formation are investigated. It is observed that the olive-shape sheet structure is similar to the experimental result qualitatively. The numerical results show that surface tension, pressure difference and swirling effect contribute to the contraction and extension of liquid sheet. The ligament formation is partially at the sheet rim or attributed to the extension of liquid hole. Especially, the movement of hairpin vortex exerts by an anti-radial direction force to the sheet surface and leads to the sheet thinness. In addition, droplet formation is attributed to breakup of ligament and central sheet.

Sheet, ligament and droplet formation in swirling primary atomization

Science.gov (United States)

Shao, Changxiao; Luo, Kun; Chai, Min; Fan, Jianren

2018-04-01

We report direct numerical simulations of swirling liquid atomization to understand the physical mechanism underlying the sheet breakup of a non-turbulent liquid swirling jet which lacks in-depth investigation. The volume-of-fluid (VOF) method coupled with adapted mesh refinement (AMR) technique in GERRIS code is employed in the present simulation. The mechanisms of sheet, ligament and droplet formation are investigated. It is observed that the olive-shape sheet structure is similar to the experimental result qualitatively. The numerical results show that surface tension, pressure difference and swirling effect contribute to the contraction and extension of liquid sheet. The ligament formation is partially at the sheet rim or attributed to the extension of liquid hole. Especially, the movement of hairpin vortex exerts by an anti-radial direction force to the sheet surface and leads to the sheet thinness. In addition, droplet formation is attributed to breakup of ligament and central sheet.

Advanced Visual Quantum Mechanics

CERN Document Server

Thaller, Bernd

2005-01-01

Advanced Visual Quantum Mechanics is a systematic effort to investigate and to teach quantum mechanics with the aid of computer-generated animations. It is a self-contained textbook that combines selected topics from atomic physics (spherical symmetry, the hydrogen atom, and particles with spin) with an introduction to quantum information theory (qubits, EPR paradox, teleportation, quantum computers). It explores relativistic quantum mechanics and the strange behavior of Dirac equation solutions. A series of appendices covers important topics from perturbation and scattering theory. The book places an emphasis on ideas and concepts, with a fair to moderate amount of mathematical rigor. Though this book stands alone, it can also be paired with Thaller Visual Quantum Mechanics to form a comprehensive course in quantum mechanics. The software for the first book earned the European Academic Software Award 2000 for outstanding innovation in its field.

World-sheet gauge fields in superstrings

International Nuclear Information System (INIS)

Porrati, M.; Tomboulis, E.T.

1989-01-01

We investigate the introduction of world-sheet 2-dimensional gauge fields in a manner consistent with world-sheet supersymmetry. We obtain the effective string action resulting from the exact integration over the world-sheet gauge fields to show that it generally describes string models with spontaneous breaking of gauge symmetries with continuous breaking parameters. We examine the question of spacetime supersymmetry spontaneous breaking, and show that breaking with continuous, in particular arbitrarily small breaking parameters does not occur; only breaking for discrete values of parameters is possible. (orig.)

Bifurcation of Jovian magnetotail current sheet

Directory of Open Access Journals (Sweden)

P. L. Israelevich

2006-07-01

Full Text Available Multiple crossings of the magnetotail current sheet by a single spacecraft give the possibility to distinguish between two types of electric current density distribution: single-peaked (Harris type current layer and double-peaked (bifurcated current sheet. Magnetic field measurements in the Jovian magnetic tail by Voyager-2 reveal bifurcation of the tail current sheet. The electric current density possesses a minimum at the point of the Bx-component reversal and two maxima at the distance where the magnetic field strength reaches 50% of its value in the tail lobe.

Exploring Content Validity of Shore Handwriting Screening and Newly Developed Score Sheet With Pre-Kindergarten Students

Directory of Open Access Journals (Sweden)

Denise K. Donica

2015-07-01

Full Text Available Background: Limited tools exist to measure handwriting readiness skills of pre-kindergarten students. This study was a preliminary exploration of content validity of the Shore Handwriting Screening (SHS and the newly developed Score Sheet with the Bruininks-Oseretsky Test of Motor Proficiency, Second Edition (BOT-2 in 4- and 5-year-old pre-kindergarten students. Because socioeconomic status (SES is known to impact handwriting skills, data from two different socioeconomic groups were collected. Method: Students from a Lower SES group (n = 36 and a Higher SES group (n = 14 completed the SHS and fine motor composite of the BOT-2. Pearson’s correlation was used to compare scores on the two assessments within the two groups. Results: SHS overall percentage scores were compared to standard scores and composite scores of the BOT-2. SHS scores displayed moderate to high correlation with fine manual control portions of the BOT-2 for the Lower SES group and low to moderate correlation for the same portion in the Higher SES group. Conclusion: SHS and the Score Sheet correlate to fine and visual-motor skill subtests on the fine manual control portions of the BOT-2, which supports the need for further research on the reliability and validity of the Score Sheet for use in practice.

Enhancing Assisted Living Technology with Extended Visual Memory

Directory of Open Access Journals (Sweden)

Joo-Hwee Lim

2011-05-01

Full Text Available Human vision and memory are powerful cognitive faculties by which we understand the world. However, they are imperfect and further, subject to deterioration with age. We propose a cognitive-inspired computational model, Extended Visual Memory (EVM, within the Computer-Aided Vision (CAV framework, to assist human in vision-related tasks. We exploit wearable sensors such as cameras, GPS and ambient computing facilities to complement a user's vision and memory functions by answering four types of queries central to visual activities, namely, Retrieval, Understanding, Navigation and Search. Learning of EVM relies on both frequency-based and attention-driven mechanisms to store view-based visual fragments (VF, which are abstracted into high-level visual schemas (VS, both in the visual long-term memory. During inference, the visual short-term memory plays a key role in visual similarity computation between input (or its schematic representation and VF, exemplified from VS when necessary. We present an assisted living scenario, termed EViMAL (Extended Visual Memory for Assisted Living, targeted at mild dementia patients to provide novel functions such as hazard-warning, visual reminder, object look-up and event review. We envisage EVM having the potential benefits in alleviating memory loss, improving recall precision and enhancing memory capacity through external support.

Environmental constraints on West Antarctic ice-sheet formation

Energy Technology Data Exchange (ETDEWEB)

Lindstrom, D R; MacAyeal, D R

1987-01-01

Small perturbations in Antarctic environmental conditions can culminate in the demise of the Antarctic ice sheet's western sector. This may have happened during the last interglacial period, and could recur within the next millennium due to atmospheric warming from trace gas and CO/sub 2/ increases. In this study, we investigate the importance of sea-level, accumulation rate, and ice influx from the East Antarctic ice sheet in the re-establishment of the West Antarctic ice sheet from a thin cover using a time-dependent numerical ice-shelf model. Our results show that a precursor to the West Antarctic ice sheet can form within 3000 years. Sea-level lowering caused by ice-sheet development in the Northern Hemisphere has the greatest environmental influence. Under favorable conditions, ice grounding occurs over all parts of the West Antarctic ice sheet except up-stream of Thwaites Glacier and in the Ross Sea region.

Hydrothermal growth of upright-standing ZnO sheet microcrystals

International Nuclear Information System (INIS)

Shi, Ruixia; Yang, Ping; Dong, Xiaobin; Jia, Changchao; Li, Jia

2014-01-01

Highlights: • Upright-standing ZnO sheet microcrystals were hydrothermally fabricated. • The ZnO sheets were prepared with sodium oxalate at 70 °C without any surfactant. • The preferable adsorption of oxalate anions causes the formation of ZnO sheet. • The continuous growth in six directions leads to the formation of hexagonal sheets. - Abstract: Large-scale upright-standing ZnO sheet microcrystals were fabricated on Zn substrate using sodium oxalate as structure-directing agent by a hydrothermal method at low temperature (70 °C) without any surfactant. The sheets are about 3–5 μm in dimension and 100–300 nm in thickness. The strong and narrow diffraction peaks of ZnO indicate that the sample has a good crystallinity and size. The morphology of sheet-like ZnO varied with the concentrations of sodium oxalate and reaction time. The sheet-like ZnO would transform into rod-like ones when sodium oxalate was substituted by equivalent sodium acetate. The formation of sheet-like ZnO is attributed to the preferable adsorption of oxalate anions on (0 0 0 1) face of ZnO, which inhibits the intrinsic growth of ZnO. Additionally, the continuous growth in six (0 1 −1 0) directions that have the lowest surface energy leads to the formation of hexagonal sheets

Effects of wood polymers and extractives on the adsorption of wet-end chemicals and the properties of the sheet - MPKY 03

Energy Technology Data Exchange (ETDEWEB)

Bobacka, V.; Lindholm, J.; Nurmi, M.; Naesman, J. [Aabo Akademi, Turku (Finland). Lab. of Paper Chemistry; Holmbom, B.; Konn, J.; Sundberg, A.; Willfoer, S. [Aabo Akademi, Turku (Finland). Lab. of Forest Products Chemistry

1998-12-31

The effects of deposition of dissolved and colloidal substances (disco, DCS) together with fixing agents on the wet end chemistry, and the paper quality have been studied. Increased amounts of wood resin in handsheets results in lower strength properties and friction of the sheets. Addition of isolated polysaccharides together with wood resin results in higher strength properties compared, at the same resin content, to sheets without added polysaccharides. Disco substances released from TMP were adsorbed/deposited onto different fillers. It is possible to determine the distribution of aggregated wood resin in handsheets of kraft pulp by confocal laser scanning microscopy. Addition of iron salts to a TMP suspension results in a decrease in the brightness of the fibers. The adsorption of cationic starch and cationic polyacrylamide was studied as well as the flocculation of a peroxide bleached TMP and mixture of TMP and kraft pulp in the presence of retention aids and fixing agents. The fixing agent had a minor effect on the flocculation in peroxide bleached TMP, while cationic starch induced flocculation after a threshold. When added together, cationic starch induced flocculation immediately. The retention of carbohydrates in the mixture was not much influenced by the presence of fixing agents and retention aids, but the extractives were efficiently retained. Colloidal substances adsorb both cationic starch and polyacrylamide. Of the dissolved substances, pectic acids are most efficiently aggregated. (orig.)

Effects of wood polymers and extractives on the adsorption of wet-end chemicals and the properties of the sheet - MPKY 03

Energy Technology Data Exchange (ETDEWEB)

Bobacka, V; Lindholm, J; Nurmi, M; Naesman, J [Aabo Akademi, Turku (Finland). Lab. of Paper Chemistry; Holmbom, B; Konn, J; Sundberg, A; Willfoer, S [Aabo Akademi, Turku (Finland). Lab. of Forest Products Chemistry

1999-12-31

The effects of deposition of dissolved and colloidal substances (disco, DCS) together with fixing agents on the wet end chemistry, and the paper quality have been studied. Increased amounts of wood resin in handsheets results in lower strength properties and friction of the sheets. Addition of isolated polysaccharides together with wood resin results in higher strength properties compared, at the same resin content, to sheets without added polysaccharides. Disco substances released from TMP were adsorbed/deposited onto different fillers. It is possible to determine the distribution of aggregated wood resin in handsheets of kraft pulp by confocal laser scanning microscopy. Addition of iron salts to a TMP suspension results in a decrease in the brightness of the fibers. The adsorption of cationic starch and cationic polyacrylamide was studied as well as the flocculation of a peroxide bleached TMP and mixture of TMP and kraft pulp in the presence of retention aids and fixing agents. The fixing agent had a minor effect on the flocculation in peroxide bleached TMP, while cationic starch induced flocculation after a threshold. When added together, cationic starch induced flocculation immediately. The retention of carbohydrates in the mixture was not much influenced by the presence of fixing agents and retention aids, but the extractives were efficiently retained. Colloidal substances adsorb both cationic starch and polyacrylamide. Of the dissolved substances, pectic acids are most efficiently aggregated. (orig.)

12 CFR 615.5211 - Risk categories-balance sheet assets.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Risk categories-balance sheet assets. 615.5211...—balance sheet assets. Section 615.5210(c) specifies certain balance sheet assets that are not assigned to the risk categories set forth below. All other balance sheet assets are assigned to the percentage...

MULTIFOCAL CHOROIDITIS IN DISSEMINATED SPOROTRICHOSIS IN PATIENTS WITH HIV/AIDS.

Science.gov (United States)

Biancardi, Ana L; Freitas, Dayvison F S; Valviesse, Vitor R G de A; Andrade, Hugo B; de Oliveira, Manoel M E; do Valle, Antonio C F; Zancope-Oliveira, Rosely M; Galhardo, Maria C G; Curi, Andre L L

2017-01-01

In this article, the authors describe multifocal choroiditis related to disseminated sporotrichosis in patients with HIV/AIDS. We conducted a retrospective observational study of three patients infected with HIV who presented with disseminated sporotrichosis characterized by cutaneous lesions, multifocal choroiditis, and other manifestations, including osteomyelitis and involvement of the bone marrow, larynx, pharynx, and nasal and oral mucosa. Five eyes of three patients with HIV/AIDS showed multifocal choroiditis related to disseminated sporotrichosis. The CD4 counts ranged from 25 to 53 mm. All patients were asymptomatic visually. The ocular disease was bilateral in two patients. The lesion size ranged from 1/3 to 2 disc diameters. None of the patients had vitritis. Of the 12 lesions, 9 were localized in the posterior pole (Zone 1) and 3 were localized in the mild periphery (Zone 2). Multifocal choroiditis due to disseminated sporotrichosis can occur in profoundly immunosuppressed patients with HIV/AIDS.

The plasma sheet boundary and Ksub(p)

International Nuclear Information System (INIS)

Freeman, J.W.

1975-01-01

Freeman and Maguire (1967) first drew attention to the intrusion of energetic plasma from the tail to the geostationary orbit during geomagnetically disturbed times. Vasyliunas (1968) reported a correlation between the inward extension of the inner boundary of the plasma sheet and the Ksub(p) index and pointed out that the plasma sheet could occasionally reach the geostationary orbit distance. More recently McIlwain (1972) using the more refined detectors aboard the ATS-5 geostationary space-craft, has emphasized the correlation between the location of the plasma sheet boundary along the ATS orbit and geomagnetic activity. Using some older but unpublished data from the Suprathermal Ion Detector aboard the ATS-1 geostationary satellite, the relation between the local time occurrence of the plasma sheet at the geostationary orbit (6.6Rsub(E)) and Ksub(p) index is reported and then a relationship for the shift in the plasma sheet radial position is derived. (Auth.)

Surface elevation changes of the greenland ice sheet - results from ESA'S ice sheet CCI

DEFF Research Database (Denmark)

Fredenslund Levinsen, Joanna; Khvorostovky, Kirill; Meister, Rakia

2013-01-01

In order to ensure long-term climate data records for the Greenland Ice Sheet (GIS), ESA have launched the Climate Change Initiative (CCI). This work presents the preliminary steps towards the Ice Sheet CCI's surface elevation change (SEC) derivation using radar altimeter data. In order to find...... the most optimal method, a Round Robin exercise was conducted in which the scientific community was asked to provide their best SEC estimate over the Jakobshavn Isbr drainage basin. The participants used both repeat-track (RT), overlapping footprints, and the cross-over (XO) methods, and both ICESat laser...... and Envisat radar altimeter data were used. Based on this and feedback sheets describing their methods we found that a combination of the RT and XO techniques yielded the best results. In the following, the obtained results will be presented and discussed....

Probability based hydrologic catchments of the Greenland Ice Sheet

Science.gov (United States)

Hudson, B. D.

2015-12-01

Greenland Ice Sheet melt water impacts ice sheet flow dynamics, fjord and coastal circulation, and sediment and biogeochemical fluxes. Melt water exiting the ice sheet also is a key term in its mass balance. Because of this, knowledge of the area of the ice sheet that contributes melt water to a given outlet (its hydrologic catchment) is important to many ice sheet studies and is especially critical to methods using river runoff to assess ice sheet mass balance. Yet uncertainty in delineating ice sheet hydrologic catchments is a problem that is rarely acknowledged. Ice sheet catchments are delineated as a function of both basal and surface topography. While surface topography is well known, basal topography is less certain because it is dependent on radar surveys. Here, I a present a Monte Carlo based approach to delineating ice sheet catchments that quantifies the impact of uncertain basal topography. In this scheme, over many iterations I randomly vary the ice sheet bed elevation within published error bounds (using Morlighem et al., 2014 bed and bed error datasets). For each iteration of ice sheet bed elevation, I calculate the hydraulic potentiometric surface and route water over its path of 'steepest' descent to delineate the catchment. I then use all realizations of the catchment to arrive at a probability map of all major melt water outlets in Greenland. I often find that catchment size is uncertain, with small, random perturbations in basal topography leading to large variations in catchments size. While some catchments are well defined, others can double or halve in size within published basal topography error bars. While some uncertainty will likely always remain, this work points to locations where studies of ice sheet hydrology would be the most successful, allows reinterpretation of past results, and points to where future radar surveys would be most advantageous.

On the balance of stresses in the plasma sheet.

Science.gov (United States)

Rich, F. J.; Wolf, R. A.; Vasyliunas, V. M.

1972-01-01

The stress resulting from magnetic tension on the neutral sheet must, in a steady state, be balanced by any one or a combination of (1) a pressure gradient in the direction along the axis of the tail, (2) a similar gradient of plasma flow kinetic energy, and (3) the tension resulting from a pressure anisotropy within the plasma sheet. Stress balance in the first two cases requires that the ratios h/LX and BZ/BX be of the same order of magnitude, where h is the half-thickness of the neutral sheet, LX is the length scale for variations along the axis of the tail, and BZ and BX are the magnetic field components in the plasma sheet just outside the neutral sheet. The second case requires, in addition, that the plasma flow speed within the neutral sheet be of the order of or larger than the Alfven speed outside the neutral sheet. Stress balance in the third case requires that just outside the neutral sheet the plasma pressure obey the marginal firehose stability condition.

Thermal Transport Properties of Dry Spun Carbon Nanotube Sheets

Directory of Open Access Journals (Sweden)

Heath E. Misak

2016-01-01

Full Text Available The thermal properties of carbon nanotube- (CNT- sheet were explored and compared to copper in this study. The CNT-sheet was made from dry spinning CNTs into a nonwoven sheet. This nonwoven CNT-sheet has anisotropic properties in in-plane and out-of-plane directions. The in-plane direction has much higher thermal conductivity than the out-of-plane direction. The in-plane thermal conductivity was found by thermal flash analysis, and the out-of-plane thermal conductivity was found by a hot disk method. The thermal irradiative properties were examined and compared to thermal transport theory. The CNT-sheet was heated in the vacuum and the temperature was measured with an IR Camera. The heat flux of CNT-sheet was compared to that of copper, and it was found that the CNT-sheet has significantly higher specific heat transfer properties compared to those of copper. CNT-sheet is a potential candidate to replace copper in thermal transport applications where weight is a primary concern such as in the automobile, aircraft, and space industries.

Nonparaxial Bessel and Bessel–Gauss pincers light-sheets

Energy Technology Data Exchange (ETDEWEB)

Mitri, F.G., E-mail: F.G.Mitri@ieee.org

2017-01-23

Highlights: • Bessel and Bessel–Gauss autofocusing light sheets (i.e. beams in 2D) are developed. • The light-sheets are synthesized based on the angular spectrum decomposition method. • Computations of the scattering, radiation force and torque benefit from the solutions. - Abstract: Nonparaxial optical Bessel and Bessel–Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.

Nonparaxial Bessel and Bessel–Gauss pincers light-sheets

International Nuclear Information System (INIS)

Mitri, F.G.

2017-01-01

Highlights: • Bessel and Bessel–Gauss autofocusing light sheets (i.e. beams in 2D) are developed. • The light-sheets are synthesized based on the angular spectrum decomposition method. • Computations of the scattering, radiation force and torque benefit from the solutions. - Abstract: Nonparaxial optical Bessel and Bessel–Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.

Technical Drafting and Mental Visualization in Interior Architecture Education

Science.gov (United States)

Arslan, Ali Riza; Dazkir, Sibel Seda

2017-01-01

We explored how beginning-level interior architecture students develop skills to create mental visualizations of three-dimensional objects and environments, how they develop their technical drawing skills, and whether or not physical and computer generated models aid this design process. We used interviews and observations to collect data. The…

Bifurcation of Jovian magnetotail current sheet

Directory of Open Access Journals (Sweden)

P. L. Israelevich

2006-07-01

Full Text Available Multiple crossings of the magnetotail current sheet by a single spacecraft give the possibility to distinguish between two types of electric current density distribution: single-peaked (Harris type current layer and double-peaked (bifurcated current sheet. Magnetic field measurements in the Jovian magnetic tail by Voyager-2 reveal bifurcation of the tail current sheet. The electric current density possesses a minimum at the point of the B_x-component reversal and two maxima at the distance where the magnetic field strength reaches 50% of its value in the tail lobe.

Buckling Behavior of Substrate Supported Graphene Sheets

Directory of Open Access Journals (Sweden)

Kuijian Yang

2016-01-01

Full Text Available The buckling of graphene sheets on substrates can significantly degrade their performance in materials and devices. Therefore, a systematic investigation on the buckling behavior of monolayer graphene sheet/substrate systems is carried out in this paper by both molecular mechanics simulations and theoretical analysis. From 70 simulation cases of simple-supported graphene sheets with different sizes under uniaxial compression, two different buckling modes are investigated and revealed to be dominated by the graphene size. Especially, for graphene sheets with length larger than 3 nm and width larger than 1.1 nm, the buckling mode depends only on the length/width ratio. Besides, it is revealed that the existence of graphene substrate can increase the critical buckling stress and strain to 4.39 N/m and 1.58%, respectively, which are about 10 times those for free-standing graphene sheets. Moreover, for graphene sheets with common size (longer than 20 nm, both theoretical and simulation results show that the critical buckling stress and strain are dominated only by the adhesive interactions with substrate and independent of the graphene size. Results in this work provide valuable insight and guidelines for the design and application of graphene-derived materials and nano-electromechanical systems.

The benefits of a trial period at home using loan-aids

NARCIS (Netherlands)

Jorritsma, F.F.; Neve, J.J.; Kooijman, A.C.; Looijestijn, P.L.; Welling, J.A.; Wildt, van der G.J.

1994-01-01

As a part of the working model the Visual Advice Centre Eindhoven (V AC-E) loans, as far as possible, low vision aids to patients for a trial period of two to three weeks before a definite advice is given. The advantages, the organisation, the experience after two and a half years, and the financial

Lateral dimension-dependent antibacterial activity of graphene oxide sheets.

Science.gov (United States)

Liu, Shaobin; Hu, Ming; Zeng, Tingying Helen; Wu, Ran; Jiang, Rongrong; Wei, Jun; Wang, Liang; Kong, Jing; Chen, Yuan

2012-08-21

Graphene oxide (GO) is a promising precursor to produce graphene-family nanomaterials for various applications. Their potential health and environmental impacts need a good understanding of their cellular interactions. Many factors may influence their biological interactions with cells, and the lateral dimension of GO sheets is one of the most relevant material properties. In this study, a model bacterium, Escherichia coli ( E. coli ), was used to evaluate the antibacterial activity of well-dispersed GO sheets, whose lateral size differs by more than 100 times. Our results show that the antibacterial activity of GO sheets toward E. coli cells is lateral size dependent. Larger GO sheets show stronger antibacterial activity than do smaller ones, and they have different time- and concentration-dependent antibacterial activities. Large GO sheets lead to most cell loss after 1 h incubation, and their concentration strongly influences antibacterial activity at relative low concentration (oxidation capacity toward glutathione is similar, consistent with X-ray photoelectron spectroscopy and ultraviolet-visible absorption spectroscopy results. This suggests the lateral size-dependent antibacterial activity of GO sheets is caused by neither their aggregation states, nor oxidation capacity. Atomic force microscope analysis of GO sheets and cells shows that GO sheets interact strongly with cells. Large GO sheets more easily cover cells, and cells cannot proliferate once fully covered, resulting in the cell viability loss observed in the followed colony counting test. In contrast, small GO sheets adhere to the bacterial surfaces, which cannot effectively isolate cells from environment. This study highlights the importance of tailoring the lateral dimension of GO sheets to optimize the application potential with minimal risks for environmental health and safety.

Fabrication of Carbon Nanotube Polymer Actuator Using Nanofiber Sheet

Science.gov (United States)

Kato, Hayato; Shimizu, Akikazu; Sato, Taiga; Kushida, Masahito

2017-11-01

Carbon nanotube polymer actuators were developed using composite nanofiber sheets fabricated by multi-walled carbon nanotubes(MWCNTs) and poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP). Nanofiber sheets were fabricated by electrospinning method. The effect of flow rate and polymer concentration on nanofiber formation were verified for optimum condition for fabricating nanofiber sheets. We examined the properties of MWCNT/PVDF-HFP nanofiber sheets, as follows. Electrical conductivity and mechanical strength increased as the MWCNT weight ratio increased. We fabricated carbon nanotube polymer actuators using MWCNT/PVDF-HFP nanofiber sheets and succeeded in operating of our actuators.

Global ice sheet/RSL simulations using the higher-order Ice Sheet System Model.

Science.gov (United States)

Larour, E. Y.; Ivins, E. R.; Adhikari, S.; Schlegel, N.; Seroussi, H. L.; Morlighem, M.

2017-12-01

Relative sea-level rise is driven by processes that are intimately linked to the evolution ofglacial areas and ice sheets in particular. So far, most Earth System models capable of projecting theevolution of RSL on decadal to centennial time scales have relied on offline interactions between RSL andice sheets. In particular, grounding line and calving front dynamics have not been modeled in a way that istightly coupled with Elasto-Static Adjustment (ESA) and/or Glacial-Isostatic Adjustment (GIA). Here, we presenta new simulation of the entire Earth System in which both Greenland and Antarctica ice sheets are tightly coupledto an RSL model that includes both ESA and GIA at resolutions and time scales compatible with processes suchas grounding line dynamics for Antarctica ice shelves and calving front dynamics for Greenland marine-terminatingglaciers. The simulations rely on the Ice Sheet System Model (ISSM) and show the impact of higher-orderice flow dynamics and coupling feedbacks between ice flow and RSL. We quantify the exact impact of ESA andGIA inclusion on grounding line evolution for large ice shelves such as the Ronne and Ross ice shelves, as well asthe Agasea Embayment ice streams, and demonstate how offline vs online RSL simulations diverge in the long run,and the consequences for predictions of sea-level rise.This work was performed at the California Institute of Technology's Jet Propulsion Laboratory undera contract with the National Aeronautics and Space Administration's Cryosphere Science Program.

VOILA 2015 Visualizations and User Interfaces for Ontologies and Linked Data : Proceedings of the International Workshop on Visualizations and User Interfaces for Ontologies and Linked Data

OpenAIRE

2015-01-01

A picture is worth a thousand words, we often say, yet many areas are in demand of sophisticated visualization techniques, and the Semantic Web is not an exception. The size and complexity of ontologies and Linked Data in the Semantic Web constantly grow and the diverse backgrounds of the users and application areas multiply at the same time. Providing users with visual representations and intuitive user interfaces can significantly aid the understanding of the domains and knowledge represent...

UNDERSTANDING PROSE THROUGH TASK ORIENTED AUDIO-VISUAL ACTIVITY: AN AMERICAN MODERN PROSE COURSE AT THE FACULTY OF LETTERS, PETRA CHRISTIAN UNIVERSITY

Directory of Open Access Journals (Sweden)

Sarah Prasasti

2001-01-01

Full Text Available The method presented here provides the basis for a course in American prose for EFL students. Understanding and appreciation of American prose is a difficult task for the students because they come into contact with works that are full of cultural baggage and far apart from their own world. The audio visual aid is one of the alternatives to sensitize the students to the topic and the cultural background. Instead of proving the ready-made audio visual aids, teachers can involve students to actively engage in a more task oriented audiovisual project. Here, the teachers encourage their students to create their own audio visual aids using colors, pictures, sound and gestures as a point of initiation for further discussion. The students can use color that has become a strong element of fiction to help them calling up a forceful visual representation. Pictures can also stimulate the students to build their mental image. Sound and silence, which are a part of the fabric of literature, may also help them to increase the emotional impact.

Coupling of climate models and ice sheet models by surface mass balance gradients: application to the Greenland Ice Sheet

Directory of Open Access Journals (Sweden)

M. M. Helsen

2012-03-01

Full Text Available It is notoriously difficult to couple surface mass balance (SMB results from climate models to the changing geometry of an ice sheet model. This problem is traditionally avoided by using only accumulation from a climate model, and parameterizing the meltwater run-off as a function of temperature, which is often related to surface elevation (H_s. In this study, we propose a new strategy to calculate SMB, to allow a direct adjustment of SMB to a change in ice sheet topography and/or a change in climate forcing. This method is based on elevational gradients in the SMB field as computed by a regional climate model. Separate linear relations are derived for ablation and accumulation, using pairs of H_s and SMB within a minimum search radius. The continuously adjusting SMB forcing is consistent with climate model forcing fields, also for initially non-glaciated areas in the peripheral areas of an ice sheet. When applied to an asynchronous coupled ice sheet – climate model setup, this method circumvents traditional temperature lapse rate assumptions. Here we apply it to the Greenland Ice Sheet (GrIS. Experiments using both steady-state forcing and glacial-interglacial forcing result in realistic ice sheet reconstructions.

Higher-order ice-sheet modelling accelerated by multigrid on graphics cards

Science.gov (United States)

Brædstrup, Christian; Egholm, David

2013-04-01

Higher-order ice flow modelling is a very computer intensive process owing primarily to the nonlinear influence of the horizontal stress coupling. When applied for simulating long-term glacial landscape evolution, the ice-sheet models must consider very long time series, while both high temporal and spatial resolution is needed to resolve small effects. The use of higher-order and full stokes models have therefore seen very limited usage in this field. However, recent advances in graphics card (GPU) technology for high performance computing have proven extremely efficient in accelerating many large-scale scientific computations. The general purpose GPU (GPGPU) technology is cheap, has a low power consumption and fits into a normal desktop computer. It could therefore provide a powerful tool for many glaciologists working on ice flow models. Our current research focuses on utilising the GPU as a tool in ice-sheet and glacier modelling. To this extent we have implemented the Integrated Second-Order Shallow Ice Approximation (iSOSIA) equations on the device using the finite difference method. To accelerate the computations, the GPU solver uses a non-linear Red-Black Gauss-Seidel iterator coupled with a Full Approximation Scheme (FAS) multigrid setup to further aid convergence. The GPU finite difference implementation provides the inherent parallelization that scales from hundreds to several thousands of cores on newer cards. We demonstrate the efficiency of the GPU multigrid solver using benchmark experiments.

Joining of Aluminium Alloy Sheets by Rectangular Mechanical Clinching

International Nuclear Information System (INIS)

Abe, Y.; Mori, K.; Kato, T.

2011-01-01

A mechanical clinching has the advantage of low running costs. However, the joint strength is not high. To improve the maximum load of the joined sheets by a mechanical clinching, square and rectangular mechanical clinching were introduced. In the mechanical clinching, the two sheets are mechanically joined by forming an interlock between the lower and upper sheets by the punch and die. The joined length with the interlock was increased by the rectangular punch and die. The deforming behaviours of the sheets in the mechanical clinching were investigated, and then the interlock in the sheets had distribution in the circumference of the projection. Although the interlocks were formed in both projection side and diagonal, the interlock in the diagonal was smaller because of the long contact length between the lower sheet and the die cavity surface. The maximum load of the joined sheets by the rectangular mechanical clinching was two times larger than the load by the round mechanical clinching.

Aid and AIDS: a delicate cocktail

NARCIS (Netherlands)

van Dalen, H.P.; Reuser, M.

2008-01-01

Development assistance targeting health overwhelmingly concentrates on HIV/AIDS. This column argues that that focus neglects critical demographic issues and degrades health infrastructure, particularly in Sub-Saharan Africa. The prime rule for AIDS aid should be “First, do no harm”.

From a Gloss to a Learning Tool: Does Visual Aids Enhance Better Sentence Comprehension?

Science.gov (United States)

Sato, Takeshi; Suzuki, Akio

2012-01-01

The aim of this study is to optimize CALL environments as a learning tool rather than a gloss, focusing on the learning of polysemous words which refer to spatial relationship between objects. A lot of research has already been conducted to examine the efficacy of visual glosses while reading L2 texts and has reported that visual glosses can be…

Computer-Assisted Visual Search/Decision Aids as a Training Tool for Mammography

National Research Council Canada - National Science Library

Nodine, Calvin

1999-01-01

The primary goal of the project is to develop a computer-assisted visual search (CAVS) mammography training tool that will improve the perceptual and cognitive skills of trainees leading to mammographic expertise...

Computer-Assisted Visual Search/Decision Aids as a Training Tool for Mammography

National Research Council Canada - National Science Library

Nodine, Calvin

1998-01-01

The primary goal of the project is to develop a computer-assisted visual search (CAVS) mammography training tool that will improve the perceptual and cognitive skills of trainees leading to mammographic expertise...

Computer-Assisted Visual Search/Decision Aids as a Training Tool for Mammography

National Research Council Canada - National Science Library

Nodine, Calvin

2000-01-01

The primary goal of the project is to develop a computer-assisted visual search (CAVS) mammography training tool that will improve the perceptual and cognitive skills of trainees leading to mammographic expertise...

The properties of bioengineered chondrocyte sheets for cartilage regeneration

Directory of Open Access Journals (Sweden)

Ota Naoshi

2009-03-01

Full Text Available Abstract Background Although the clinical results of autologous chondrocyte implantation for articular cartilage defects have recently improved as a result of advanced techniques based on tissue engineering procedures, problems with cell handling and scaffold imperfections remain to be solved. A new cell-sheet technique has been developed, and is potentially able to overcome these obstacles. Chondrocyte sheets applicable to cartilage regeneration can be prepared with this cell-sheet technique using temperature-responsive culture dishes. However, for clinical application, it is necessary to evaluate the characteristics of the cells in these sheets and to identify their similarities to naive cartilage. Results The expression of SOX 9, collagen type 2, 27, integrin α10, and fibronectin genes in triple-layered chondrocyte sheets was significantly increased in comparison to those in conventional monolayer culture and in a single chondrocyte sheet, implying a nature similar to ordinary cartilage. In addition, immunohistochemistry demonstrated that collagen type II, fibronectin, and integrin α10 were present in the triple-layered chondrocyte sheets. Conclusion The results of this study indicate that these chondrocyte sheets with a consistent cartilaginous phenotype and adhesive properties may lead to a new strategy for cartilage regeneration.

High-Throughput Light Sheet Microscopy for the Automated Live Imaging of Larval Zebrafish

Science.gov (United States)

Baker, Ryan; Logan, Savannah; Dudley, Christopher; Parthasarathy, Raghuveer

The zebrafish is a model organism with a variety of useful properties; it is small and optically transparent, it reproduces quickly, it is a vertebrate, and there are a large variety of transgenic animals available. Because of these properties, the zebrafish is well suited to study using a variety of optical technologies including light sheet fluorescence microscopy (LSFM), which provides high-resolution three-dimensional imaging over large fields of view. Research progress, however, is often not limited by optical techniques but instead by the number of samples one can examine over the course of an experiment, which in the case of light sheet imaging has so far been severely limited. Here we present an integrated fluidic circuit and microscope which provides rapid, automated imaging of zebrafish using several imaging modes, including LSFM, Hyperspectral Imaging, and Differential Interference Contrast Microscopy. Using this system, we show that we can increase our imaging throughput by a factor of 10 compared to previous techniques. We also show preliminary results visualizing zebrafish immune response, which is sensitive to gut microbiota composition, and which shows a strong variability between individuals that highlights the utility of high throughput imaging. National Science Foundation, Award No. DBI-1427957.

Is a picture worth a thousand words? The interaction of visual display and attribute representation in attenuating framing bias}

Directory of Open Access Journals (Sweden)

Eyal Gamliel

2013-07-01

Full Text Available The attribute framing bias is a well-established phenomenon, in which an object or an event is evaluated more favorably when presented in a positive frame such as ``the half full glass'' than when presented in the complementary negative framing. Given that previous research showed that visual aids can attenuate this bias, the current research explores the factors underlying the attenuating effect of visual aids. In a series of three experiments, we examined how attribute framing bias is affected by two factors: (a The display mode---verbal versus visual; and (b the representation of the critical attribute---whether one outcome, either the positive or the negative, is represented or both outcomes are represented. In Experiment 1 a marginal attenuation of attribute framing bias was obtained when verbal description of either positive or negative information was accompanied by corresponding visual representation. In Experiment 2 similar marginal attenuation was obtained when both positive and negative outcomes were verbally represented. In Experiment 3, where the verbal description represented both positive and negative outcomes, significant attenuation was obtained when it was accompanied by a visual display that represented a single outcome, and complete attenuation, totally eliminating the framing bias, was obtained when it was accompanied by a visual display that represented both outcomes. Thus, our findings showed that interaction between the display mode and the representation of the critical attribute attenuated the framing bias. Theoretical and practical implications of the interaction between verbal description, visual aids and representation of the critical attribute are discussed, and future research is suggested.

Fatigue characteristics of dual-phase steel sheets

Energy Technology Data Exchange (ETDEWEB)

Onn, Irwan Herman; Ahmad, Norhayati; Tamin, Mohd Nasir [Universiti Teknologi Malaysia, Skudai (Malaysia)

2015-01-15

Fatigue characteristics of dual-phase steel sheets, commonly used in automobile body construction were established. For this purpose, a series of fatigue tests, each at constant stress amplitude were conducted on 1.2 mm-thick, dual-phase DP600 steel sheet specimens with two different load ratios of minimum-to-maximum stress, R = 0.1 and -1. The resulting fatigue behavior is expressed in terms of fatigue strength-life (S-N) curves. Fatigue behavior of the steel sheets in the high-cycle fatigue region can be represented by Basquin's equation with coefficient and exponent value of 921.2 and 0.093, respectively. An endurance limit of 255 MPa is observed. In addition, fatigue strengths of the dual-phase steel sheets display lower magnitude than their bulk counterparts. Effect of mean stress on fatigue behavior of the steel sheets is well predicted by Walker's model. Exponential calibration factor is introduced to the models by SWT, Goodman and Morrow with comparable prediction to the Walker's model.

Retinocoroidite toxoplásmica em pacientes com AIDS e neurotoxoplasmose Toxoplasmic retinochoroiditis in patients with AIDS and neurotoxoplasmosis

Directory of Open Access Journals (Sweden)

Jane Mary Alves

2010-04-01

Full Text Available OBJETIVO: A neurotoxoplasmose é a alteração do sistema nervoso central mais frequente observada em pacientes com AIDS. A ocorrência de toxoplasmose ocular em neurotoxoplasmose ainda é pouco estudada. O objetivo deste estudo foi de investigar a ocorrência de retinocoroidite toxoplásmica, típica ou provável, em pacientes com AIDS e neurotoxoplasmose. MÉTODOS: Foi desenvolvido estudo prospectivo, tipo série de casos incluindo 70 pacientes, de ambos os sexos, com idade variando de 20 a 63 anos, internados nas enfermarias de três hospitais públicos da cidade do Recife, Pernambuco, com tais diagnósticos firmados segundo os critérios do CDC (1992, no período de janeiro a outubro de 2008. Os pacientes caracterizavam-se por: primeiro episódio de neurotoxoplasmose (65; 92,9% ou recidiva (5; 7,1%; desconhecimento de ter AIDS (23; 32,9%, contagem média de linfócitos T CD4 de 139,8 ± 3,04 células/mm³ e carga viral média igual a 137.080 ± 39.380 cópias/mL. Todos os pacientes foram submetidos a exame oftalmológico, consistindo de: inspeção ocular; aferição da acuidade visual; investigação da função muscular extrínseca ocular e fundoscopia, empregando oftalmoscópio indireto binocular (modelo OHN 3.5 (Eyetec® e lente externa de 20 dioptrias (Volk®. RESULTADOS: Foram diagnosticados 4 (5,7% pacientes com lesões cicatriciais de retinocoroidite, características de toxoplasmose ocular, sendo típica em 3 (75% pacientes e bilateral em 1. Não houve qualquer caso de retinocoroidite ativa, típica ou provável. As lesões oculares ativas foram raras comparadas às lesões cicatriciais, as quais se associam à presença de cistos na retina. CONCLUSÃO: Recomenda-se que mesmo lesões cicatriciais sejam valorizadas em pacientes com AIDS.PURPOSE: Neurotoxoplasmosis is the most common central nervous system disorder in patients with AIDS. The occurrence of ocular toxoplasmosis in neurotoxoplasmosis is not well studied. The objective of

Dynamics of a radially expanding liquid sheet: Experiments

Science.gov (United States)

Majumdar, Nayanika; Tirumkudulu, Mahesh

2017-11-01

A recent theory predicts that sinuous waves generated at the center of a radially expanding liquid sheet grow spatially even in absence of a surrounding gas phase. Unlike flat liquid sheets, the thickness of a radially expanding liquid sheet varies inversely with distance from the center of the sheet. To test the predictions of the theory, experiments were carried out on a horizontal, radially expanding liquid sheet formed by collision of a single jet on a solid impactor. The latter was placed on a speaker-vibrator with controlled amplitude and frequency. The growth of sinuous waves was determined by measuring the wave surface inclination angle using reflected laser light under both atmospheric and sub-atmospheric pressure conditions. It is shown that the measured growth rate matches with the predictions of the theory over a large range of Weber numbers for both pressure conditions suggesting that the thinning of the liquid sheet plays a dominant role in setting the growth rate of sinuous waves with minimal influence of the surrounding gas phase on its dynamics. IIT Bombay.

Pediatric and adolescent population with visual impairment: study of 385 cases População infantil com deficiência visual: estudo de 385 casos

Directory of Open Access Journals (Sweden)

Maria Aparecida Onuki Haddad

2006-06-01

Full Text Available OBJECTIVE: To analyze data on the pediatric population attending the Ophthalmologic Clinic's Low Vision Service at the São Paulo University Medical School. METHODS: Low vision ophthalmologic assessment, from April 1998 to December 2003, of 385 children and adolescents with mean age of 7 years; 51.7% males and 48.3% females. The main data analyzed were age, diagnosis, anatomic site of the ocular injury, visual acuity, and prescription of optical aids. RESULTS: 45.4% were below 6 years, and 54.6% were between 6 and 16 years. 35.5% experienced moderate visual impairment, 26% had severe visual impairment, 8.6% had profound visual impairment, 10.6% were near blind, and 1.6% were blind. The main causes of visual impairment included congenital glaucoma (30.6%, macular retinochoroiditis due to congenital toxoplasmosis (16.7%, congenital cataract (12.8%, retinal and macular inherited disorders (11.7%, and optic atrophy (9.8%. Among school-age children, 52.9% received a prescription of optical aids. The most widely used optical aids for distance were 2.8 X 26 (34.4%; 4.2 X 12 (30.3%; and 6 X 17 (26.8% telescopic systems. The most frequently prescribed optical aid for near vision was the 2x magnifying bar (33.3%. CONCLUSIONS: There is a need for prevention of primary (congenital infections, secondary (congenital glaucoma and retinopathy of prematurity, and tertiary (congenital cataract visual impairment. The prescription of optical aids for school-age children will help them perform better at school and contribute to their social inclusion.OBJETIVO: Analisar as características da população infantil atendida no Serviço de Visão Subnormal da Clínica Oftalmológica do Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo. MÉTODOS: Avaliação oftalmológica de 385 crianças e adolescentes, de abril de 1998 a dezembro de 2003, com idade média de 7 anos; 51,7% do sexo masculino e 48,3% do sexo feminino. Idade, diagn

Optimal swimming of a sheet.

Science.gov (United States)

Montenegro-Johnson, Thomas D; Lauga, Eric

2014-06-01

Propulsion at microscopic scales is often achieved through propagating traveling waves along hairlike organelles called flagella. Taylor's two-dimensional swimming sheet model is frequently used to provide insight into problems of flagellar propulsion. We derive numerically the large-amplitude wave form of the two-dimensional swimming sheet that yields optimum hydrodynamic efficiency: the ratio of the squared swimming speed to the rate-of-working of the sheet against the fluid. Using the boundary element method, we show that the optimal wave form is a front-back symmetric regularized cusp that is 25% more efficient than the optimal sine wave. This optimal two-dimensional shape is smooth, qualitatively different from the kinked form of Lighthill's optimal three-dimensional flagellum, not predicted by small-amplitude theory, and different from the smooth circular-arc-like shape of active elastic filaments.

Balance of the West Antarctic Ice Sheet

Science.gov (United States)

2002-01-01

For several decades, measurements of the West Antarctic Ice Sheet showed it to be retreating rapidly. But new data derived from satellite-borne radar sensors show the ice sheet to be growing. Changing Antarctic ice sheets remains an area of high scientific interest, particularly in light of recent global warming concerns. These new findings are significant because scientists estimate that sea level would rise 5-6 meters (16-20 feet) if the ice sheet collapsed into the sea. Do these new measurements signal the end of the ice sheet's 10,000-year retreat? Or, are these new satellite data simply much more accurate than the sparse ice core and surface measurements that produced the previous estimates? Another possibility is that the ice accumulation may simply indicate that the ice sheet naturally expands and retreats in regular cycles. Cryologists will grapple with these questions, and many others, as they examine the new data. The image above depicts the region of West Antarctica where scientists measured ice speed. The fast-moving central ice streams are shown in red. Slower tributaries feeding the ice streams are shown in blue. Green areas depict slow-moving, stable areas. Thick black lines depict the areas that collect snowfall to feed their respective ice streams. Reference: Ian Joughin and Slawek Tulaczyk Science Jan 18 2002: 476-480. Image courtesy RADARSAT Antarctic Mapping Project

Spina Bifida: General Information. Fact Sheet Number 12 = La Espina Bifida: Informacion General. Fact Sheet Number 12.

Science.gov (United States)

National Information Center for Children and Youth with Disabilities, Washington, DC.

This fact sheet offers definitions of the three types of spina bifida, outlines their incidence, describes characteristics of individuals with spina bifida, and reviews educational implications. The fact sheet emphasizes that school programs should be flexible to accommodate these students' special needs and frequent absences, that children with…

Ice Sheets & Ice Cores

DEFF Research Database (Denmark)

Mikkelsen, Troels Bøgeholm

Since the discovery of the Ice Ages it has been evident that Earth’s climate is liable to undergo dramatic changes. The previous climatic period known as the Last Glacial saw large oscillations in the extent of ice sheets covering the Northern hemisphere. Understanding these oscillations known....... The first part concerns time series analysis of ice core data obtained from the Greenland Ice Sheet. We analyze parts of the time series where DO-events occur using the so-called transfer operator and compare the results with time series from a simple model capable of switching by either undergoing...

Microstructure evolution of a dissimilar junction interface between an Al sheet and a Ni-coated Cu sheet joined by magnetic pulse welding

Energy Technology Data Exchange (ETDEWEB)

Itoi, Takaomi, E-mail: itoi@faculty.chiba-u.jp [Department of Mechanical Engineering, Chiba University, 1-33, Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Mohamad, Azizan Bin; Suzuki, Ryo [Department of Mechanical Engineering, Chiba University, 1-33, Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Okagawa, Keigo [Department of Electrical and Electronics Engineering, Tokyo Metropolitan College of Industrial Technology, 1-10-40 Higashi ohi, Shinagawa-ku, Tokyo 140-0011 (Japan)

2016-08-15

An Al sheet and a Ni-coated Cu sheet were lap joined by using magnetic pulse welding (MPW). Tensile tests were performed on the joined sheets, and a good lap joint was achieved at a discharge energy of > 0.9 kJ. The weld interface exhibited a wavy morphology and an intermediate layer along the weld interface. Microstructure observations of the intermediate layer revealed that the Ni coating region consisted of a Ni–Al binary amorphous alloy and that the Al sheet region contained very fine Al nanograins. Ni fragments indicative of unmelted residual Ni from the coating were also observed in parts of the intermediate layer. Formation of these features can be attributed to localize melting and a subsequent high rate cooling of molten Al and Ni confined to the interface during the MPW process. In the absence of an oxide film, atomic-scale bonding was also achieved between the intermediate layer and the sheet surfaces after the collision. MPW utilises impact energy, which affects the sheet surfaces. From the obtained results, good lap joint is attributed to an increased contact area, the anchor effect, work hardening, the absence of an oxide film, and suppressed formation of intermetallic compounds at the interface. - Highlights: •Good lap joint of an Al sheet and a Ni-coated Cu sheet was achieved by using magnetic pulse welding. •A Ni–Al binary amorphous alloy was formed as an intermediate layer at weld interface. •Atomic-scale bonding was achieved between the intermediate layer and the sheet surfaces.

Adjunctive aids for the detection of oral premalignancy

Directory of Open Access Journals (Sweden)

D Charanya

2016-01-01

Full Text Available Early detection of cancer greatly decreases the morbidity and mortality rates and thereby increases the 5-year survival rates. In developing countries like India where the disease is highly prevalent focus is mainly on decreasing the mortality rates which can be easily achieved by detection at an asymptomatic stage. Visual examination has been the standard screening method for screening oral cancer through several decades, and it is well known that conventional visual examination is limited to subjective interpretation and cannot be easily achieved in certain anatomical sites. As a solution to all these adjunctive techniques have emerged, and it has been widely used. An effort is made through this paper to review the most commonly used adjunctive aids for the detection of premalignancy and cancer.

Computer-Aided design of belt and pulley systems using Visual Basic

African Journals Online (AJOL)

A Visual Basic Code “DriveCad” was developed for analysis and design of flat and V-belt drives. The Code was used to solve design problems and the results compared favorably with data generated by manual computat-ions, with variation of less than 1.6 %. DriveCad was used to generate scaled 2-dimensional drawings ...

Shape of magnifiers affects controllability in children with visual impairment

NARCIS (Netherlands)

Liebrand-Schurink, Joyce; Boonstra, F. Nienke; van Rens, Ger H. M. B.; Cillessen, Antonius H. N.; Meulenbroek, Ruud G. J.; Cox, Ralf F. A.

2016-01-01

PurposeThis study aimed to examine the controllability of cylinder-shaped and dome-shaped magnifiers in young children with visual impairment. MethodsThis study investigates goal-directed arm movements in low-vision aid use (stand and dome magnifier-like object) in a group of young children with

DEVELOPING VISUAL PRESENTATION ATTITUDE RUBRIC: VALIDITY AND RELIABILITY STUDY

OpenAIRE

ATEŞ, Hatice KADIOĞLU; ADA, Sefer; BAYSAL, Z. Nurdan

2015-01-01

Abstract The aim of this study is to develop visual presentation attitude rubric which is valid and reliable for the 4th grade students. 218 students took part in this study from Engin Can Güre which located in Istanbul, Esenler. While preparing this assessment tool with 34 criterias , 6 university lecturers view have been taken who are experts in their field. The answer key sheet has 4 (likert )type options. The rubric has been first tested by Kaiser-Meyer Olkin and Bartletts tests an...

Overview of Hole GT3A: The sheeted dike/gabbro transition

Science.gov (United States)

Abe, N.; Harris, M.; Michibayashi, K.; de Obeso, J. C.; Kelemen, P. B.; Takazawa, E.; Teagle, D. A. H.; Coggon, J. A.; Matter, J. M.; Phase I Science Party, T. O. D. P.

2017-12-01

Hole GT3A (23.11409 N, 58.21172 E) was drilled by the Oman Drilling Project (OmDP) into Wadi Abdah of the Samail ophiolite, Oman. OmDP is an international collaboration supported by the International Continental Scientifi1c Drilling Program, the Deep Carbon Observatory, NSF, IODP, JAMSTEC, and the European, Japanese, German and Swiss Science Foundations, with in-kind support in Oman from the Ministry of Regional Municipalities and Water Resources, Public Authority of Mining, Sultan Qaboos University, and the German University of Technology. Hole GT3A was diamond cored in February to March 2017 to a total depth of 400 m. The outer surfaces of the cores were imaged and described on site before being curated, boxed and shipped to the IODP drill ship Chikyu, where they underwent comprehensive visual and instrumental analysis. Hole GT3A recovered predominantly sheeted dikes and gabbros and has been sub-divided into 4 igneous groups based on the abundance of gabbro downhole. Group 1 (Upper Sheeted Dike Sequence) occurs from 0 to 111.02 m, group II (Upper Gabbro Sequence) is from 111.02 to 127.89 m, group III (Lower Sheeted Dike Sequence) is between 127.89 to 233.84 m and group IV (Lower Gabbro Sequence) is from 233.84 to 400 m. Group II and IV are both associated with almost equal proportions of dikes to gabbroic lithologies, whereas group I & III have >95% dikes. The sheeted dikes were logged as either basalt (46.9 %) or diabase (26.2 %) depending on the predominant grain size of the dike. Gabbroic lithologies include (most to least abundant) gabbro, oxide gabbro and olivine gabbro. Other lithologies present include diorite (7.5%) and tonalite and trondhjemite (1%). Tonalite and trondhjemite are present as cm-sized dikelets and are found within group II and IV. Gabbroic lithologies generally display a varitextured appearance and are characterised by the co-existence of poikilitic and granular domains. Detailed observations of chilled margins and igneous contacts reveal

Language, literacy, and communication regarding medication in an anticoagulation clinic: a comparison of verbal vs. visual assessment.

Science.gov (United States)

Schillinger, Dean; Machtinger, Edward L; Wang, Frances; Palacios, Jorge; Rodriguez, Maytrella; Bindman, Andrew

2006-01-01

Despite the importance of clinician-patient communication, little is known about rates and predictors of medication miscommunication. Measuring rates of miscommunication, as well as differences between verbal and visual modes of assessment, can inform efforts to more effectively communicate about medications. We studied 220 diverse patients in an anticoagulation clinic to assess concordance between patient and clinician reports of warfarin regimens. Bilingual research assistants asked patients to (1) verbalize their prescribed weekly warfarin regimen and (2) identify this regimen from a digitized color menu of warfarin pills. We obtained clinician reports of patient regimens from chart review. Patients were categorized as having regimen concordance if there were no patient-clinician discrepancies in total weekly dosage. We then examined whether verbal and visual concordance rates varied with patient's language and health literacy. Fifty percent of patients achieved verbal concordance and 66% achieved visual concordance with clinicians regarding the weekly warfarin regimen (P visual discordance. Shifting from verbal to visual modes was associated with greater patient-provider concordance across all patient subgroups, but especially for those with communication barriers.Clinician-patient discordance regarding patients' warfarin regimen was common but occurred less frequently when patients used a visual aid. Visual aids may improve the accuracy of medication assessment, especially for patients with communication barriers.

Synthesis of nanometre-thick MoO3 sheets

Science.gov (United States)

Kalantar-Zadeh, Kourosh; Tang, Jianshi; Wang, Minsheng; Wang, Kang L.; Shailos, Alexandros; Galatsis, Kosmas; Kojima, Robert; Strong, Veronica; Lech, Andrew; Wlodarski, Wojtek; Kaner, Richard B.

2010-03-01

The formation of MoO3 sheets of nanoscale thickness is described. They are made from several fundamental sheets of orthorhombic α-MoO3, which can be processed in large quantities via a low cost synthesis route that combines thermal evaporation and mechanical exfoliation. These fundamental sheets consist of double-layers of linked distorted MoO6 octahedra. Atomic force microscopy (AFM) measurements show that the minimum resolvable thickness of these sheets is 1.4 nm which is equivalent to the thickness of two double-layers within one unit cell of the α-MoO3 crystal.

Fact Sheets on Pesticides in Schools.

Science.gov (United States)

National Coalition against the Misuse of Pesticides, Washington, DC.

This document consists of a collection of fact sheets about the use of pesticides in schools and how to reduce it. The sheets are: (1) "Alternatives to Using Pesticides in Schools: What Is Integrated Pest Management?"; (2) "Health Effects of 48 Commonly Used Pesticides in Schools"; (3) "The Schooling of State Pesticide…

Single clay sheets inside electrospun polymer nanofibers

Science.gov (United States)

Sun, Zhaohui

2005-03-01

Nanofibers were prepared from polymer solution with clay sheets by electrospinning. Plasma etching, as a well controlled process, was used to supply electrically excited gas molecules from a glow discharge. To reveal the structure and arrangement of clay layers in the polymer matrix, plasma etching was used to remove the polymer by controlled gasification to expose the clay sheets due to the difference in reactivity. The shape, flexibility, and orientation of clay sheets were studied by transmission and scanning electron microscopy. Additional quantitative information on size distribution and degree of exfoliation of clay sheets were obtained by analyzing electron micrograph of sample after plasma etching. Samples in various forms including fiber, film and bulk, were thinned by plasma etching. Morphology and dispersion of inorganic fillers were studied by electron microscopy.

Complex world-sheets from N=2 strings

International Nuclear Information System (INIS)

Barbon, J.L.F.

1996-01-01

We study some properties of target space strings constructed from (2,1) heterotic strings. We argue that world-sheet complexification is a general property of the bosonic sector of such target world-sheets. We give a target space interpretation of this fact and relate it to the non-gaussian nature of free string field theory. We provide several one-loop calculations supporting the stringy construction of critical world-sheets in terms of (2,1) models. Using finite-temperature boundary conditions in the underlying (2,1) string we obtain non-chiral target space spin structures, and point out some of the problems arising for chiral spin structures, such as the heterotic world-sheet. To this end, we study the torus partition function of the corresponding asymmetric orbifold of the (2,1) string. (orig.)

The development of a visual system for the detection of obstructions for visually impaired people

International Nuclear Information System (INIS)

Okayasu, Mitsuhiro

2009-01-01

In this paper, the author presents a new visual system that can aid visually impaired people in walking. The system provides object information (that is, shape and location) through the sense of touch. This visual system depends on three different components: (i) an infrared camera sensor that detects the obstruction, (ii) a control system that measures the distance between the obstruction and the sensor, and (iii) a tooling apparatus with small pins (φ1 mm) used in forming a three-dimensional shape of the obstruction. The pins, arranged on a 6x6 matrix, move longitudinally between the retracted and extended positions based on the distance data. The pin extends individually, while the pin tip reflects the object's outer surface. The length of the pin from the base surface is proportional to the distance of the sensor from the obstruction. An ultrasonic actuator, controlled at a 15Hz frame rate, is the driving force for the pin movement. The tactile image of the 3D shape can provide information about the obstruction

Motion and shape of snowplough sheets in coaxial accelerators

International Nuclear Information System (INIS)

Tsagas, N.F.; Mair, G.L.R.; Prinn, A.E.

1978-01-01

A long coaxial accelerator is filled with helium at initial gas pressure between 0.2 and 4 Torr. When connected to a large capacitor at < - 10 kV a discharge is started at one end; the central electrode has negative polarity. The velocity of the plasma sheet, the snowplough, and its shape have been derived from streak photographs for terminal currents between about 100 and 300 kA. The motion of the sheet has been analysed by balancing the electromagnetic driving force against the inertia of the mass of the gas swept up by a plane sheet taken to be impenetrable to gas atoms. The calculated positions and average sheet velocities, which involve simplifying assumptions, have been found to be in good agreement with observations at different positions and pressures. Also the shape of the sheet has been derived by allowing for the sheet's curvature in the linear momentum equation while net radial motions causing variations in profile have, at first, been excluded. The calculated shape of the sheet is very nearly that photographically observed. The axial velocity of a sheet element is evaluated under the assumption that the plasma is azimuthally uniform, free of spikes and that the vessel's wall does not affect the shape. (author)

Corrosion Behavior of Brazed Zinc-Coated Structured Sheet Metal

Directory of Open Access Journals (Sweden)

A. Nikitin

2017-01-01

Full Text Available Arc brazing has, in comparison to arc welding, the advantage of less heat input while joining galvanized sheet metals. The evaporation of zinc is reduced in the areas adjacent to the joint and improved corrosion protection is achieved. In the automotive industry, lightweight design is a key technology against the background of the weight and environment protection. Structured sheet metals have higher stiffness compared to typical automobile sheet metals and therefore they can play an important role in lightweight structures. In the present paper, three arc brazing variants of galvanized structured sheet metals were validated in terms of the corrosion behavior. The standard gas metal arc brazing, the pulsed arc brazing, and the cold metal transfer (CMT® in combination with a pulsed cycle were investigated. In experimental climate change tests, the influence of the brazing processes on the corrosion behavior of galvanized structured sheet metals was investigated. After that, the corrosion behavior of brazed structured and flat sheet metals was compared. Because of the selected lap joint, the valuation of damage between sheet metals was conducted. The pulsed CMT brazing has been derived from the results as the best brazing method for the joining process of galvanized structured sheet metals.

Auditory, visual, and auditory-visual perceptions of emotions by young children with hearing loss versus children with normal hearing.

Science.gov (United States)

Most, Tova; Michaelis, Hilit

2012-08-01

This study aimed to investigate the effect of hearing loss (HL) on emotion-perception ability among young children with and without HL. A total of 26 children 4.0-6.6 years of age with prelingual sensory-neural HL ranging from moderate to profound and 14 children with normal hearing (NH) participated. They were asked to identify happiness, anger, sadness, and fear expressed by an actress when uttering the same neutral nonsense sentence. Their auditory, visual, and auditory-visual perceptions of the emotional content were assessed. The accuracy of emotion perception among children with HL was lower than that of the NH children in all 3 conditions: auditory, visual, and auditory-visual. Perception through the combined auditory-visual mode significantly surpassed the auditory or visual modes alone in both groups, indicating that children with HL utilized the auditory information for emotion perception. No significant differences in perception emerged according to degree of HL. In addition, children with profound HL and cochlear implants did not perform differently from children with less severe HL who used hearing aids. The relatively high accuracy of emotion perception by children with HL may be explained by their intensive rehabilitation, which emphasizes suprasegmental and paralinguistic aspects of verbal communication.

Orientation and Morphology Effects in Rapid Silicon Sheet Solidification

Science.gov (United States)

Ciszek, T. F.

1984-01-01

Radial growth anisotropies and equilibrium forms of point nucleated, dislocation free silicon sheets spreading horizontally on the free surface of a silicon melt were measured for (100), (110), (111), and (112) sheet planes. The growth process was recorded. Qualitative Wulff surface free energy polar plots were deduced from the equilibrium shapes for each sheet plane. Predicted geometries for the tip shape of unidirectional, dislocation free, horizontally grown sheets growing in various directions within the planes were analyzed. Polycrystalline sheets and dendrite propagation were analyzed. For dendrites, growth rates on the order of 2.5 m/min and growth rate anisotropies of 25 are measured.

47 CFR 32.101 - Structure of the balance sheet accounts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Structure of the balance sheet accounts. 32.101... UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.101 Structure of the balance sheet accounts. The Balance Sheet accounts shall be maintained as follows...

Molding cork sheets to complex shapes

Science.gov (United States)

Sharpe, M. H.; Simpson, W. G.; Walker, H. M.

1977-01-01

Partially cured cork sheet is easily formed to complex shapes and then final-cured. Temperature and pressure levels required for process depend upon resin system used and final density and strength desired. Sheet can be bonded to surface during final cure, or can be first-formed in mold and bonded to surface in separate step.

Whooping Cough (Pertussis) - Fact Sheet for Parents

Science.gov (United States)

... months 4 through 6 years Fact Sheet for Parents Color [2 pages] Español: Tosferina (pertussis) The best ... according to the recommended schedule. Fact Sheets for Parents Diseases and the Vaccines that Prevent Them Chickenpox ...

Characterization of Tensile Mechanical Behavior of MSCs/PLCL Hybrid Layered Sheet

Directory of Open Access Journals (Sweden)

Azizah Intan Pangesty

2016-06-01

Full Text Available A layered construct was developed by combining a porous polymer sheet and a cell sheet as a tissue engineered vascular patch. The primary objective of this study is to investigate the influence of mesenchymal stem cells (MSCs sheet on the tensile mechanical properties of porous poly-(l-lactide-co-ε-caprolactone (PLCL sheet. The porous PLCL sheet was fabricated by the solid-liquid phase separation method and the following freeze-drying method. The MSCs sheet, prepared by the temperature-responsive dish, was then layered on the top of the PLCL sheet and cultured for 2 weeks. During the in vitro study, cellular properties such as cell infiltration, spreading and proliferation were evaluated. Tensile test of the layered construct was performed periodically to characterize the tensile mechanical behavior. The tensile properties were then correlated with the cellular properties to understand the effect of MSCs sheet on the variation of the mechanical behavior during the in vitro study. It was found that MSCs from the cell sheet were able to migrate into the PLCL sheet and actively proliferated into the porous structure then formed a new layer of MSCs on the opposite surface of the PLCL sheet. Mechanical evaluation revealed that the PLCL sheet with MSCs showed enhancement of tensile strength and strain energy density at the first week of culture which is characterized as the effect of MSCs proliferation and its infiltration into the porous structure of the PLCL sheet. New technique was presented to develop tissue engineered patch by combining MSCs sheet and porous PLCL sheet, and it is expected that the layered patch may prolong biomechanical stability when implanted in vivo.

Three-dimensional visual feature representation in the primary visual cortex.

Science.gov (United States)

Tanaka, Shigeru; Moon, Chan-Hong; Fukuda, Mitsuhiro; Kim, Seong-Gi

2011-12-01

In the cat primary visual cortex, it is accepted that neurons optimally responding to similar stimulus orientations are clustered in a column extending from the superficial to deep layers. The cerebral cortex is, however, folded inside a skull, which makes gyri and fundi. The primary visual area of cats, area 17, is located on the fold of the cortex called the lateral gyrus. These facts raise the question of how to reconcile the tangential arrangement of the orientation columns with the curvature of the gyrus. In the present study, we show a possible configuration of feature representation in the visual cortex using a three-dimensional (3D) self-organization model. We took into account preferred orientation, preferred direction, ocular dominance and retinotopy, assuming isotropic interaction. We performed computer simulation only in the middle layer at the beginning and expanded the range of simulation gradually to other layers, which was found to be a unique method in the present model for obtaining orientation columns spanning all the layers in the flat cortex. Vertical columns of preferred orientations were found in the flat parts of the model cortex. On the other hand, in the curved parts, preferred orientations were represented in wedge-like columns rather than straight columns, and preferred directions were frequently reversed in the deeper layers. Singularities associated with orientation representation appeared as warped lines in the 3D model cortex. Direction reversal appeared on the sheets that were delimited by orientation-singularity lines. These structures emerged from the balance between periodic arrangements of preferred orientations and vertical alignment of the same orientations. Our theoretical predictions about orientation representation were confirmed by multi-slice, high-resolution functional MRI in the cat visual cortex. We obtained a close agreement between theoretical predictions and experimental observations. The present study throws a

The storm time central plasma sheet

Directory of Open Access Journals (Sweden)

R. Schödel

2002-11-01

Full Text Available The plasma sheet plays a key role during magnetic storms because it is the bottleneck through which large amounts of magnetic flux that have been eroded from the dayside magnetopause have to be returned to the dayside magnetosphere. Using about five years of Geotail data we studied the average properties of the near- and midtail central plasma sheet (CPS in the 10–30 RE range during magnetic storms. The earthward flux transport rate is greatly enhanced during the storm main phase, but shows a significant earthward decrease. Hence, since the magnetic flux cannot be circulated at a sufficient rate, this leads to an average dipolarization of the central plasma sheet. An increase of the specific entropy of the CPS ion population by a factor of about two during the storm main phase provides evidence for nonadiabatic heating processes. The direction of flux transport during the main phase is consistent with the possible formation of a near-Earth neutral line beyond ~20 RE.Key words. Magnetospheric physics (plasma convection; plasma sheet; storms and substorms

New directions in the science and technology of advanced sheet explosive formulations and the key energetic materials used in the processing of sheet explosives: Emerging trends.

Science.gov (United States)

Talawar, M B; Jangid, S K; Nath, T; Sinha, R K; Asthana, S N

2015-12-30

This review presents the work carried out by the international community in the area of sheet explosive formulations and its applications in various systems. The sheet explosive is also named as PBXs and is a composite material in which solid explosive particles like RDX, HMX or PETN are dispersed in a polymeric matrix, forms a flexible material that can be rolled/cut into sheet form which can be applied to any complex contour. The designed sheet explosive must possess characteristic properties such as flexible, cuttable, water proof, easily initiable, and safe handling. The sheet explosives are being used for protecting tanks (ERA), light combat vehicle and futuristic infantry carrier vehicle from different attacking war heads etc. Besides, sheet explosives find wide applications in demolition of bridges, ships, cutting and metal cladding. This review also covers the aspects such as risks and hazard analysis during the processing of sheet explosive formulations, effect of ageing on sheet explosives, detection and analysis of sheet explosive ingredients and the R&D efforts of Indian researchers in the development of sheet explosive formulations. To the best of our knowledge, there has been no review article published in the literature in the area of sheet explosives. Copyright © 2015 Elsevier B.V. All rights reserved.

An alternative to motivate learners and to develop moral values in future physical and sports education professionals, using visual aids of USA-Cuba discrepancy in the teaching-learning process

Directory of Open Access Journals (Sweden)

Silvio Rizo-Valdés

2013-04-01

Full Text Available This article deals with a pedagogical alternative to motivate learners in classes with reference to USA-Cuba discrepancy using visual aids that express the different actions and aggressions of US-imperialism to Latin America, specifically our country with the purpose of widening its military supremacy and the policy of annexation towards our Island. The classes involve two main moments: 1- a directed lecture, 2- a workshop session to conclude; achieving the objectives of this pedagogical alternative, to the development of a set of teaching and intellectual skills contributing this way to the enhancement of moral values such as: identity, patriotism, anti-imperialism and solidarity among others.

Qualitative Research Methods in Visual Communication. Case Study: Visual Networks in the Promotional Videos of the European Year of Volunteering

Directory of Open Access Journals (Sweden)

Camelia Cmeciu

2013-05-01

Full Text Available European Years are a means of promoting European issues at a macro and micro-level. The objective of this paper is to provide the visual differences in the framing of the issue of volunteering at a European and national level. The approach focuses on a blending of two qualitative research methods in visual communication: ATLAS.ti (computer assisted/ aided qualitative data analysis software and social semiotics. The results of our analysis highlight two network views on volunteering promoted through videos, a salience of transactional processes in the implementation of volunteering at a European and national level, and a classification of various types of social practices specific to Romania. This study provides an insight into the way in which two different qualitative methods may be combined in order to provide a visual representation and interpretation to a European issue.

Australian Government Balance Sheet Management

OpenAIRE

Wilson Au-Yeung; Jason McDonald; Amanda Sayegh

2006-01-01

Since almost eliminating net debt, the Australian Government%u2019s attention has turned to the financing of broader balance sheet liabilities, such as public sector superannuation. Australia will be developing a significant financial asset portfolio in the %u2018Future Fund%u2019 to smooth the financing of expenses through time. This raises the significant policy question of how best to manage the government balance sheet to reduce risk. This paper provides a framework for optimal balance sh...

Energy information sheets, July 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

Energy information sheets, September 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

Anesthesia Fact Sheet

Science.gov (United States)

... Education About NIGMS NIGMS Home > Science Education > Anesthesia Anesthesia Tagline (Optional) Middle/Main Content Area En español ... Version (464 KB) Other Fact Sheets What is anesthesia? Anesthesia is a medical treatment that prevents patients ...

Effective and Efficient Stand Magnifier Use in Visually Impaired Children

NARCIS (Netherlands)

Liebrand-Schurink, Joyce; Cox, Ralf F. A.; van Rens, Ger H. M. B.; Cillessen, Antonius H. N.; Meulenbroek, Ruud G. J.; Boonstra, Frouke N.

2016-01-01

Purpose: The main objective of this study was to analyze the effectiveness and efficiency of magnifier use in children with visual impairment who did not use a low vision aid earlier, in an ecologically valid goal-directed perceptuomotor task. Methods: Participants were twenty-nine 4- to 8-year-old

Ice flow Modelling of the Greenland Ice Sheet

DEFF Research Database (Denmark)

Nielsen, Lisbeth Tangaa

Models of ice flow have a range of application in glaciology, including investigating the large-scale response of ice sheets to changes in climate, assimilating data to estimate unknown conditions beneath the ice sheet, and in interpreting proxy records obtained from ice cores, among others. In t...... a steady state with respect to the reference climate at the end of the simulation and that the mass balance of the ice sheet at this time was more sensitive to recent climate fluctuations than the temperature forcing in the early or mid-Holocene.......Models of ice flow have a range of application in glaciology, including investigating the large-scale response of ice sheets to changes in climate, assimilating data to estimate unknown conditions beneath the ice sheet, and in interpreting proxy records obtained from ice cores, among others....... In this PhD project, the use of ice flow models for the interpretation of the age-structure of the Greenland ice sheet, i.e. the depth within the ice, at which ice deposited at given times are found at present day. Two different observational data sets of this archive were investigated. Further, paleo...

Forced tearing of ductile and brittle thin sheets.

Science.gov (United States)

Tallinen, T; Mahadevan, L

2011-12-09

Tearing a thin sheet by forcing a rigid object through it leads to complex crack morphologies; a single oscillatory crack arises when a tool is driven laterally through a brittle sheet, while two diverging cracks and a series of concertinalike folds forms when a tool is forced laterally through a ductile sheet. On the other hand, forcing an object perpendicularly through the sheet leads to radial petallike tears in both ductile and brittle materials. To understand these different regimes we use a combination of experiments, simulations, and simple theories. In particular, we describe the transition from brittle oscillatory tearing via a single crack to ductile concertina tearing with two tears by deriving laws that describe the crack paths and wavelength of the concertina folds and provide a simple phase diagram for the morphologies in terms of the material properties of the sheet and the relative size of the tool.

Self-inhibiting growth of the Greenland Ice Sheet

DEFF Research Database (Denmark)

Langen, Peter Lang; Solgaard, Anne Munck; Hvidberg, Christine Schøtt

2012-01-01

The build-up of the Greenland Ice Sheet (GrIS) from ice-free conditions is studied in an ice sheet model (ISM) driven by fields from an atmospheric general circulation model (GCM) to demonstrate the importance of coupling between the two components. Experiments where the two are coupled off-line...... are augmented by one where an intermediate ice sheet configuration is coupled back to the GCM. Forcing the ISM with GCM fields corresponding to the ice-free state leads to extensive regrowth which, however, is halted when the intermediate recoupling step is included. This inhibition of further growth is due...... to a Föhn effect of moist air parcels being lifted over the intermediate ice sheet and arriving in the low-lying Greenland interior with high temperatures. This demonstrates that two-way coupling between the atmosphere and the ice sheet is essential for understanding the dynamics and that large scale...

Antibubbles and fine cylindrical sheets of air

KAUST Repository

Beilharz, D.

2015-08-14

Drops impacting at low velocities onto a pool surface can stretch out thin hemispherical sheets of air between the drop and the pool. These air sheets can remain intact until they reach submicron thicknesses, at which point they rupture to form a myriad of microbubbles. By impacting a higher-viscosity drop onto a lower-viscosity pool, we have explored new geometries of such air films. In this way we are able to maintain stable air layers which can wrap around the entire drop to form repeatable antibubbles, i.e. spherical air layers bounded by inner and outer liquid masses. Furthermore, for the most viscous drops they enter the pool trailing a viscous thread reaching all the way to the pinch-off nozzle. The air sheet can also wrap around this thread and remain stable over an extended period of time to form a cylindrical air sheet. We study the parameter regime where these structures appear and their subsequent breakup. The stability of these thin cylindrical air sheets is inconsistent with inviscid stability theory, suggesting stabilization by lubrication forces within the submicron air layer. We use interferometry to measure the air-layer thickness versus depth along the cylindrical air sheet and around the drop. The air film is thickest above the equator of the drop, but thinner below the drop and up along the air cylinder. Based on microbubble volumes, the thickness of the cylindrical air layer becomes less than 100 nm before it ruptures.

Antibubbles and fine cylindrical sheets of air

KAUST Repository

Beilharz, D.; Guyon, A.; Li, E.  Q.; Thoraval, M.-J.; Thoroddsen, Sigurdur T

2015-01-01

Drops impacting at low velocities onto a pool surface can stretch out thin hemispherical sheets of air between the drop and the pool. These air sheets can remain intact until they reach submicron thicknesses, at which point they rupture to form a myriad of microbubbles. By impacting a higher-viscosity drop onto a lower-viscosity pool, we have explored new geometries of such air films. In this way we are able to maintain stable air layers which can wrap around the entire drop to form repeatable antibubbles, i.e. spherical air layers bounded by inner and outer liquid masses. Furthermore, for the most viscous drops they enter the pool trailing a viscous thread reaching all the way to the pinch-off nozzle. The air sheet can also wrap around this thread and remain stable over an extended period of time to form a cylindrical air sheet. We study the parameter regime where these structures appear and their subsequent breakup. The stability of these thin cylindrical air sheets is inconsistent with inviscid stability theory, suggesting stabilization by lubrication forces within the submicron air layer. We use interferometry to measure the air-layer thickness versus depth along the cylindrical air sheet and around the drop. The air film is thickest above the equator of the drop, but thinner below the drop and up along the air cylinder. Based on microbubble volumes, the thickness of the cylindrical air layer becomes less than 100 nm before it ruptures.

Nonparaxial Bessel and Bessel-Gauss pincers light-sheets

Science.gov (United States)

Mitri, F. G.

2017-01-01

Nonparaxial optical Bessel and Bessel-Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.

Ice Sheet Roughness Estimation Based on Impulse Responses Acquired in the Global Ice Sheet Mapping Orbiter Mission

Science.gov (United States)

Niamsuwan, N.; Johnson, J. T.; Jezek, K. C.; Gogineni, P.

2008-12-01

The Global Ice Sheet Mapping Orbiter (GISMO) mission was developed to address scientific needs to understand the polar ice subsurface structure. This NASA Instrument Incubator Program project is a collaboration between Ohio State University, the University of Kansas, Vexcel Corporation and NASA. The GISMO design utilizes an interferometric SAR (InSAR) strategy in which ice sheet reflected signals received by a dual-antenna system are used to produce an interference pattern. The resulting interferogram can be used to filter out surface clutter so as to reveal the signals scattered from the base of the ice sheet. These signals are further processed to produce 3D-images representing basal topography of the ice sheet. In the past three years, the GISMO airborne field campaigns that have been conducted provide a set of useful data for studying geophysical properties of the Greenland ice sheet. While topography information can be obtained using interferometric SAR processing techniques, ice sheet roughness statistics can also be derived by a relatively simple procedure that involves analyzing power levels and the shape of the radar impulse response waveforms. An electromagnetic scattering model describing GISMO impulse responses has previously been proposed and validated. This model suggested that rms-heights and correlation lengths of the upper surface profile can be determined from the peak power and the decay rate of the pulse return waveform, respectively. This presentation will demonstrate a procedure for estimating the roughness of ice surfaces by fitting the GISMO impulse response model to retrieved waveforms from selected GISMO flights. Furthermore, an extension of this procedure to estimate the scattering coefficient of the glacier bed will be addressed as well. Planned future applications involving the classification of glacier bed conditions based on the derived scattering coefficients will also be described.

Preparing Parents to Make An Informed Choice About Antibiotic Use for Common Acute Respiratory Infections in Children: A Randomised Trial of Brief Decision Aids in a Hypothetical Scenario.

Science.gov (United States)

Coxeter, Peter D; Del Mar, Chris B; Hoffmann, Tammy C

2017-08-01

Childhood acute respiratory infections (ARIs) are one of the most common reasons for primary care consultations and for receiving an antibiotic. Public awareness of antibiotic benefit and harms for these conditions is low. To facilitate informed decision making, ideally in collaboration with their doctor, parents need clear communication about benefits and harms. Decision aids may be able to facilitate this process. The aim of this study was to evaluate the effectiveness of three decision aids about antibiotic use for common ARIs in children. Adult parents of children aged 1-16 years (n = 120) were recruited from community settings and then randomised using a computer-generated randomisation sequence to receive a decision aid (n = 60) or fact sheet (n = 60). Allocation was concealed and used sealed and opaque sequentially numbered envelopes. Participants self-completed questionnaires at baseline and immediately post-intervention. The primary outcome was informed choice (conceptual and numerical knowledge; attitudes towards, and intention to use, antibiotics for a future ARI). Secondary outcomes were decisional conflict, decisional self-efficacy, and material acceptability. After reading the information, significantly more intervention group participants made an informed choice [57%] compared with control group participants [29%] [difference 28, 95% confidence interval (CI) 11-45%, p decision aids prepared parents to make an informed choice about antibiotic use more than fact sheets, in a hypothetical situation. Their effect within a consultation needs to be evaluated. Clinical Trials Registration Number: ACTRN12615000843550.

3D Visualization of Developmental Toxicity of 2,4,6-Trinitrotoluene in Zebrafish Embryogenesis Using Light-Sheet Microscopy

Directory of Open Access Journals (Sweden)

Juneyong Eum

2016-11-01

Full Text Available Environmental contamination by trinitrotoluene is of global concern due to its widespread use in military ordnance and commercial explosives. Despite known long-term persistence in groundwater and soil, the toxicological profile of trinitrotoluene and other explosive wastes have not been systematically measured using in vivo biological assays. Zebrafish embryos are ideal model vertebrates for high-throughput toxicity screening and live in vivo imaging due to their small size and transparency during embryogenesis. Here, we used Single Plane Illumination Microscopy (SPIM/light sheet microscopy to assess the developmental toxicity of explosive-contaminated water in zebrafish embryos and report 2,4,6-trinitrotoluene-associated developmental abnormalities, including defects in heart formation and circulation, in 3D. Levels of apoptotic cell death were higher in the actively developing tissues of trinitrotoluene-treated embryos than controls. Live 3D imaging of heart tube development at cellular resolution by light-sheet microscopy revealed trinitrotoluene-associated cardiac toxicity, including hypoplastic heart chamber formation and cardiac looping defects, while the real time PCR (polymerase chain reaction quantitatively measured the molecular changes in the heart and blood development supporting the developmental defects at the molecular level. Identification of cellular toxicity in zebrafish using the state-of-the-art 3D imaging system could form the basis of a sensitive biosensor for environmental contaminants and be further valued by combining it with molecular analysis.

Short-term visual memory properties sheet secondary school age with different levels of physical development

Directory of Open Access Journals (Sweden)

E.E. Menshikh

2013-12-01

Full Text Available Purpose . The results presented properties of short-term visual memory with different levels of physical development. Materials and methods. The study included 405 boys and girls Cherkassy school 11 in age from 13 to 16 years. Study of short-term visual memory was carried out using tables with 10 characters ( numbers and ambiguous geometric shapes . Indicator memory was the higher, the more information was displayed. Measured the length and body weight was recorded cardiorespiratory indicators - heart rate at rest and after 20 squats, lung capacity, breath-hold inspiration and expiration. Physical development factor was calculated by taking into account actual and average population indices. Results . Found that the volume of short-term visual memory, the boys and girls high school age does not depend on the level of their physical development. Despite the fact that the trend towards higher performance memory in groups of persons with a high level of physical development compared to their same age with medium and low levels, significant differences between the mean values for the most part have been identified. No significant differences between the values of the investigated cognitive function in groups by sex. Conclusions . Growth pattern memory with age in this period of ontogenesis preserved that coincides with the data presented in the scientific works of scientists.

Protein unfolding versus β-sheet separation in spider silk nanocrystals

International Nuclear Information System (INIS)

Alam, Parvez

2014-01-01

In this communication a mechanism for spider silk strain hardening is proposed. Shear failure of β-sheet nanocrystals is the first failure mode that gives rise to the creation of smaller nanocrystals, which are of higher strength and stiffness. β-sheet unfolding requires more energy than nanocrystal separation in a shear mode of failure. As a result, unfolding occurs after the nanocrystals separate in shear. β-sheet unfolding yields a secondary strain hardening effect once the β-sheet conformation is geometrically stable and acts like a unidirectional fibre in a fibre reinforced composite. The mechanism suggested herein is based on molecular dynamics calculations of residual inter-β-sheet separation strengths against residual intra-β-sheet unfolding strengths. (paper)

Cerebral Palsy: General Information. Fact Sheet Number 2 = La Paralisis Cerebral: Informacion General. Fact Sheet Number 18.

Science.gov (United States)

Interstate Research Associates, McLean, VA.

This fact sheet on cerebral palsy is offered in both English and Spanish. First, it provides a definition and considers various causes (e.g., an insufficient amount of oxygen reaching the fetal or newborn brain). The fact sheet then offers incidence figures and explains characteristics of the three main types of cerebral palsy: spastic, athetoid,…

Film sheet cassette

International Nuclear Information System (INIS)

1981-01-01

A novel film sheet cassette is described for handling CAT photographic films under daylight conditions and facilitating their imaging. A detailed description of the design and operation of the cassette is given together with appropriate illustrations. The resulting cassette is a low-cost unit which is easily constructed and yet provides a sure light-tight seal for the interior contents of the cassette. The individual resilient fingers on the light-trap permit the ready removal of the slide plate for taking pictures. The stippled, non-electrostatic surface of the pressure plate ensures an air layer and free slidability of the film for removal and withdrawal of the film sheet. The advantage of the daylight system is that a darkroom need not be used for inserting and removing the film in and out of the cassette resulting in a considerable time saving. (U.K.)

Assessing HIV and AIDS treatment safety and health-related quality of life among cohort of Malaysian patients: a discussion on methodological approach.

Science.gov (United States)

Syed, Imran Ahmed; Syed Sulaiman, Syed Azhar; Hassali, Mohammad Azmi; Lee, Christopher K C

2015-10-01

Health-related quality of life (HRQoL) is increasingly recognized as an important outcome and as a complement to traditional biological end points of diseases such as mortality. Unless there is a complete cure available for HIV/AIDS, development and implementation of a reliable and valid cross cultural quality of life measure is necessary to assess not only the physical and medical needs of HIV/AIDS people, but their psychological, social, environmental, and spiritual areas of life. A qualitative exploration of HIV/AIDS patients' understanding, perceptions and expectations will be carried out with the help of semi structured interview guide by in depth interviews, while quantitative assessment of patient reported adverse drug reactions and their impact on health related quality of life will be carried out by using data collection tool comprising patient demographics, SF-12, Naranjo scale, and a clinical data sheet. The findings may serve as baseline QOL data of people living with HIV/AIDS in Malaysia and also a source data to aid construction of management plan to improve HIV/AIDS patients' QOL. It will also provide basic information about HIV/AIDS patients' perceptions, expectations and believes towards HIV/AIDS and its treatment which may help in designing strategies to enhance patients' awareness which in turn can help in addressing issues related to compliance and adherence. © 2013 John Wiley & Sons Ltd.

An Adaptive Test Sheet Generation Mechanism Using Genetic Algorithm

Directory of Open Access Journals (Sweden)

Huan-Yu Lin

2012-01-01

Full Text Available For test-sheet composition systems, it is important to adaptively compose test sheets with diverse conceptual scopes, discrimination and difficulty degrees to meet various assessment requirements during real learning situations. Computation time and item exposure rate also influence performance and item bank security. Therefore, this study proposes an Adaptive Test Sheet Generation (ATSG mechanism, where a Candidate Item Selection Strategy adaptively determines candidate test items and conceptual granularities according to desired conceptual scopes, and an Aggregate Objective Function applies Genetic Algorithm (GA to figure out the approximate solution of mixed integer programming problem for the test-sheet composition. Experimental results show that the ATSG mechanism can efficiently, precisely generate test sheets to meet the various assessment requirements than existing ones. Furthermore, according to experimental finding, Fractal Time Series approach can be applied to analyze the self-similarity characteristics of GA’s fitness scores for improving the quality of the test-sheet composition in the near future.

Simulations of the Scandinavian ice sheet and its subsurface conditions

International Nuclear Information System (INIS)

Boulton, G.S.; Caban, P.; Hulton, N.

1999-12-01

An ice sheet model has been applied to an approximate flow line through the area of the Fennoscandian ice sheet. The modelled ice sheet fluctuations have been matched with stratigraphic evidence of Weichselian ice sheet fluctuation in order to simulate ice sheet attributes through time along the flowline. The model predicts extensive melting at the base of the ice sheet. This output has been used as an input to a simplified model of hydrogeology along the southern flank of the ice sheet so as to reconstruct patterns of subglacial groundwater flow. The output from the model is also used to estimate patterns of subglacial stress and strain. Results suggest that large scale subglacial groundwater catchment are formed which were quite different in extent from modern catchment; that fossil subglacial groundwaters should be found at sampling depths; and much fracturing in shallow bedrock in Sweden could be glacially generated

Simulations of the Scandinavian ice sheet and its subsurface conditions

Energy Technology Data Exchange (ETDEWEB)

Boulton, G.S.; Caban, P.; Hulton, N. [Edinburgh Univ. (United Kingdom). Dept of Geology and Geophysics

1999-12-01

An ice sheet model has been applied to an approximate flow line through the area of the Fennoscandian ice sheet. The modelled ice sheet fluctuations have been matched with stratigraphic evidence of Weichselian ice sheet fluctuation in order to simulate ice sheet attributes through time along the flowline. The model predicts extensive melting at the base of the ice sheet. This output has been used as an input to a simplified model of hydrogeology along the southern flank of the ice sheet so as to reconstruct patterns of subglacial groundwater flow. The output from the model is also used to estimate patterns of subglacial stress and strain. Results suggest that large scale subglacial groundwater catchment are formed which were quite differentin extent from modern catchment; that fossil subglacial groundwaters should be found at sampling depths; and much fracturing in shallow bedrock in Sweden could be glacially generated.

Synthesis, characterization and optical properties of sheet-like ZnO

International Nuclear Information System (INIS)

Liu, Changzhen; Meng, Dawei; Wu, Xiuling; Wang, Yongqian; Yu, Xiaohong; Zhang, Zhengjie; Liu, Xiaoyang

2011-01-01

Highlights: → Sheet-like ZnO with regular hexagon shape was synthesized with a two-step method. → Sheet-like ZnO predecessor was synthesized at low temperature in open system. → The diameter and thickness of ZnO sheet can be controlled conveniently. → This low-cost and environmentally benign approach is controllable and reproducible. → Sheet-like ZnO may have potential application in optical and electrical devices. -- Abstract: Sheet-like ZnO with regular hexagon shape and uniform diameter has been successfully synthesized through a two-step method without any metal catalyst. First, the sheet-like ZnO precursor was synthesized in a weak alkaline carbamide environment with stirring in a constant temperature water-bath by the homogeneous precipitation method, then sheet-like ZnO was obtained by calcining at 600 o C for 2 h. The structures and optical properties of sheet-like ZnO have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and UV-vis-NIR spectrophotometer. The results reveal that the product is highly crystalline with hexagonal wurtzite phase and has appearance of hexagon at (0 0 0 1) plane. The HRTEM images confirm that the individual sheet-like ZnO is single crystal. The PL spectrum exhibits a narrow ultraviolet emission at 397 nm and a broad visible emission centering at 502 nm. The band gap of sheet-like ZnO is about 3.15 eV.

Comparison of Corrosion Behavior of Electrochemically Deposited Nano-Cobalt-Coated Ni Sheet

Directory of Open Access Journals (Sweden)

Nasser Al-Aqeeli

2013-01-01

Full Text Available Corrosion behavior of nano-coblat-coated Ni sheet was compared with pure Ni and 20% Fe-Ni alloy sheet using potentiodynamic polarization and linear polarization technique in 0.1 M NaCl solution at room temperature. Results showed that corrosion resistance properties of nano-Co-coated Ni sheet were almost same as that of pure Ni sheet, however corrosion resistance of 20% Fe-Ni sheet was decreased significantly. Pitting potential of 20% Fe-Ni sheet was subsequently decreased as compared to pure Ni sheet as well as nano-cobalt-coated Ni sheet. SEM/EDS analysis of the corroded surfaces showed that both pure Ni and nano-coblat-coated Ni sheet did not show any appreciable corrosion however significant corrosion was observed in the case of 20% Fe-Ni sheet.

The epistemic representation: visual production and communication of scientific knowledge.

Directory of Open Access Journals (Sweden)

Francisco López Cantos

2015-03-01

Full Text Available Despite its great influence on the History of Science, visual representations have attracted marginal interest until very recently and have often been regarded as a simple aid for mere illustration or scientific demonstration. However, it has been shown that visualization is an integral element of reasoning and a highly effective and common heuristic strategy in the scientific community and that the study of the conditions of visual production and communication are essential in the development of scientific knowledge. In this paper we deal with the nature of the various forms of visual representation of knowledge that have been happening throughout the history of science, taking as its starting point the illustrated monumental works and three-dimensional models that begin to develop within the scientific community around the fifteenth century. The main thesis of this paper is that any scientific visual representations have common elements that allow us to approach them from epistemic nature, heuristic and communicative dimension.

A Method for Visualizing Transaction Logs of a Faceted OPAC

Directory of Open Access Journals (Sweden)

Xi Niu

2010-12-01

Full Text Available The authors introduce a method for visualizing user transaction logs from a library catalog application. Simple visualization supporting intuitive or qualitative analysis to quickly make sense of complicated patterns can be a useful supplement or alternative to more common quantitative analysis. To this end, a visual flowchart is created illustrating an individual user session. This visualization can be used to qualitatively grasp user behavior within the application, possibly as an aid to identifying patterns or clusters of use. These flowcharts are created by automatically pre-processing apache transaction logs into an XML representation of meaningful user actions, which are then converted via JavaScript in a web browser to HTML table based flowcharts. The particular toolkit introduced is named Visualization for Understanding Transaction Logs (VUTL, and is available with an open source license. The toolkit has been prototyped with logs from the catalog applications of several academic and one public library.

AID SELECTIVITY PRACTICE AND AID EFFECTIVENESS IN SUB-SAHARAN AFRICA

Directory of Open Access Journals (Sweden)

Adeniyi Jimmy Adedokun

2017-09-01

Full Text Available Foreign aid strategies have undergone restructuring as donors adopt aid selectivity practice to improve aid effectiveness. This study investigates the impact of aid selectivity practice on aid effectiveness (aid-growth relationship in Sub-Saharan Africa (SSA and several groups of countries within SSA from 1980 to 2012. Employing system generalized methods of moments (system GMM technique; the study produces strong evidence that there is significant improvement in aid effectiveness due to aid selectivity practice.

Visual Cues Contribute Differentially to Audiovisual Perception of Consonants and Vowels in Improving Recognition and Reducing Cognitive Demands in Listeners With Hearing Impairment Using Hearing Aids.

Science.gov (United States)

Moradi, Shahram; Lidestam, Björn; Danielsson, Henrik; Ng, Elaine Hoi Ning; Rönnberg, Jerker

2017-09-18

We sought to examine the contribution of visual cues in audiovisual identification of consonants and vowels-in terms of isolation points (the shortest time required for correct identification of a speech stimulus), accuracy, and cognitive demands-in listeners with hearing impairment using hearing aids. The study comprised 199 participants with hearing impairment (mean age = 61.1 years) with bilateral, symmetrical, mild-to-severe sensorineural hearing loss. Gated Swedish consonants and vowels were presented aurally and audiovisually to participants. Linear amplification was adjusted for each participant to assure audibility. The reading span test was used to measure participants' working memory capacity. Audiovisual presentation resulted in shortened isolation points and improved accuracy for consonants and vowels relative to auditory-only presentation. This benefit was more evident for consonants than vowels. In addition, correlations and subsequent analyses revealed that listeners with higher scores on the reading span test identified both consonants and vowels earlier in auditory-only presentation, but only vowels (not consonants) in audiovisual presentation. Consonants and vowels differed in terms of the benefits afforded from their associative visual cues, as indicated by the degree of audiovisual benefit and reduction in cognitive demands linked to the identification of consonants and vowels presented audiovisually.

14 CFR Section 3 - Chart of Balance Sheet Accounts

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Chart of Balance Sheet Accounts Section 3 Section 3 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION... Balance Sheet Classifications Section 3 Chart of Balance Sheet Accounts [See footnotes at end of table...

17 CFR 229.1001 - (Item 1001) Summary term sheet.

Science.gov (United States)

2010-04-01

... sheet that is written in plain English. The summary term sheet must briefly describe in bullet point format the most material terms of the proposed transaction. The summary term sheet must provide security... transaction. The bullet points must cross-reference a more detailed discussion contained in the disclosure...

Foreign aid

DEFF Research Database (Denmark)

Tarp, Finn

2008-01-01

Foreign aid has evolved significantly since the Second World War in response to a dramatically changing global political and economic context. This article (a) reviews this process and associated trends in the volume and distribution of foreign aid; (b) reviews the goals, principles and instituti......Foreign aid has evolved significantly since the Second World War in response to a dramatically changing global political and economic context. This article (a) reviews this process and associated trends in the volume and distribution of foreign aid; (b) reviews the goals, principles...... and institutions of the aid system; and (c) discusses whether aid has been effective. While much of the original optimism about the impact of foreign aid needed modification, there is solid evidence that aid has indeed helped further growth and poverty reduction...

Theoretical Predictions of Freestanding Honeycomb Sheets of Cadmium Chalcogenides

Energy Technology Data Exchange (ETDEWEB)

Zhou, Jia [ORNL; Huang, Jingsong [ORNL; Sumpter, Bobby G [ORNL; Kent, Paul R [ORNL; Xie, Yu [ORNL; Terrones Maldonado, Humberto [ORNL; Smith, Sean C [ORNL

2014-01-01

Two-dimensional (2D) nanocrystals of CdX (X = S, Se, Te) typically grown by colloidal synthesis are coated with organic ligands. Recent experimental work on ZnSe showed that the organic ligands can be removed at elevated temperature, giving a freestanding 2D sheet of ZnSe. In this theoretical work, freestanding single- to few-layer sheets of CdX, each possessing a pseudo honeycomb lattice, are considered by cutting along all possible lattice planes of the bulk zinc blende (ZB) and wurtzite (WZ) phases. Using density functional theory, we have systematically studied their geometric structures, energetics, and electronic properties. A strong surface distortion is found to occur for all of the layered sheets, and yet all of the pseudo honeycomb lattices are preserved, giving unique types of surface corrugations and different electronic properties. The energetics, in combination with phonon mode calculations and molecular dynamics simulations, indicate that the syntheses of these freestanding 2D sheets could be selective, with the single- to few-layer WZ110, WZ100, and ZB110 sheets being favored. Through the GW approximation, it is found that all single-layer sheets have large band gaps falling into the ultraviolet range, while thicker sheets in general have reduced band gaps in the visible and ultraviolet range. On the basis of the present work and the experimental studies on freestanding double-layer sheets of ZnSe, we envision that the freestanding 2D layered sheets of CdX predicted herein are potential synthesis targets, which may offer tunable band gaps depending on their structural features including surface corrugations, stacking motifs, and number of layers.

NTPR Fact Sheets

Science.gov (United States)

History Documents US Underground Nuclear Test History Reports NTPR Radiation Exposure Reports Enewetak Atoll Cleanup Documents TRAC About Who We Are Our Values History Locations Our Leadership Director Support Center Contact Us FAQ Sheet Links Success Stories Contracts Business Opportunities Current

How to effectively design and create a concept mobile application to aid in the management of type 1 diabetes in adolescents.

Science.gov (United States)

McCulloch, Victoria; Hope, Sarah; Loranger, Brian; Rea, Paul

2017-07-01

Diabetes is one of the most prevalent chronic health conditions in the world; with a range of diabetes-related mobile applications available to the public to aid in glycaemic control and self-management. Statistically, adherence to medication is extremely low in adolescents with Type 1 Diabetes Mellitus (T1DM), therefore, this paper focuses on the research and design of an interactive and educational concept mobile application aimed at early to mid-adolescents to aid in their understanding of T1DM. As visual elements are an essential part of the design, this research outlines how visual components were designed specifically for adolescents with T1DM.

Prevalence of pain in patients with HIV/AIDS: A cross-sectional survey in a South Indian state

Directory of Open Access Journals (Sweden)

Shoba N Nair

2009-01-01

Secondary - To assess the type, site, severity, management of pain and impact of pain on quality of life in these patients. Design: Multicentre cross-sectional survey (This paper is a pilot study. Settings: ART centre at St. John′s Medical College Hospital, Bangalore and Snehadan, A supportive and care centre for HIV/ AIDS patients at Bangalore. Materials and Methods: Data sheet, Brief pain inventory and Short - Form McGill pain questionnaire. Subjects: This is an ongoing study and the pilot study includes 140 HIV/AIDS patients in different stages of the disease. Results: About 66.7% (28/42 in-patients and 24.5% (24/98 out-patients complained of pain. Of the 52 patients who reported pain, 32% (14/52 reported neuropathic pain and 68% (38/52 reported noci-ceptive pain. Headache was most common followed by pain in the soles of feet and low back. Only 26.9% (17/52 received any form of analgesic. Pain severity significantly affects the quality of life. Conclusions: Pain is a common and debilitating symptom of HIV/AIDS. It is however, under-estimated and under treated.

The social balance sheet 2004

OpenAIRE

Ph. Delhez; P. Heuse

2005-01-01

Each year, in the 4th quarter’s Economic Review, the National Bank examines the provisional results of the social balance sheets. As all the social balance sheets are not yet available for 2004, the study is based on a limited population of enterprises, compiled according to the principle of a constant sample. This population is made up of 38,530 enterprises employing around 1,331,000 workers in 2004. The main results of the analysis, in terms of employment, working hours, labour cost and tra...

Analysis of Financial Position Based on the Balance Sheet

OpenAIRE

Spineanu-Georgescu Luciana

2011-01-01

Analysis of financial position based on the balance sheet is mainly aimed at assessing the extent to which financial structure chosen by the firm, namely, financial resources, covering the needs reflected in the balance sheet financed. This is done through an analysis known as horizontal analysis balance sheet financial imbalances.

Sense and readability: participant information sheets for research studies.

Science.gov (United States)

Ennis, Liam; Wykes, Til

2016-02-01

Informed consent in research is partly achieved through the use of information sheets. There is a perception however that these information sheets are long and complex. The recommended reading level for patient information is grade 6, or 11-12 years old. To investigate whether the readability of participant information sheets has changed over time, whether particular study characteristics are related to poorer readability and whether readability and other study characteristics are related to successful study recruitment. Method: We obtained 522 information sheets from the UK National Institute for Health Research Clinical Research Network: Mental Health portfolio database and study principal investigators. Readability was assessed with the Flesch reading index and the Grade level test. Information sheets increased in length over the study period. The mean grade level across all information sheets was 9.8, or 15-16 years old. A high level of patient involvement was associated with more recruitment success and studies involving pharmaceutical or device interventions were the least successful. The complexity of information sheets had little bearing on successful recruitment. Information sheets are far more complex than the recommended reading level of grade 6 for patient information. The disparity may be exacerbated by an increasing focus on legal content. Researchers would benefit from clear guidance from ethics committees on writing succinctly and accessibly and how to balance the competing legal issues with the ability of participants to understand what a study entails. © The Royal College of Psychiatrists 2016.

Advanced friction modeling for sheet metal forming

NARCIS (Netherlands)

Hol, J.; Cid Alfaro, M.V.; de Rooij, Matthias B.; Meinders, Vincent T.

2012-01-01

The Coulomb friction model is frequently used for sheet metal forming simulations. This model incorporates a constant coefficient of friction and does not take the influence of important parameters such as contact pressure or deformation of the sheet material into account. This article presents a

Advanced friction modeling in sheet metal forming

NARCIS (Netherlands)

Hol, J.; Cid Alfaro, M.V.; Meinders, Vincent T.; Huetink, Han

2011-01-01

The Coulomb friction model is frequently used for sheet metal forming simulations. This model incorporates a constant coefficient of friction and does not take the influence of important parameters such as contact pressure or deformation of the sheet material into account. This article presents a

Research on Liquid Forming Process of Nickel Superalloys Thin Sheet Metals

Directory of Open Access Journals (Sweden)

Hyrcza-Michalska M.

2017-12-01

Full Text Available The paper presents the study of drawability of thin sheet metals made of a nickel superalloy Inconel type. The manufacturing process of axisymmetric cup – cone and a closed section profile in the form of a circular tube were designed and analyzed. In both cases, working fluid-oil was used in place of the rigid tools. The process of forming liquid is currently the only alternative method for obtaining complex shapes, coatings, and especially if we do it with high-strength materials. In the case of nickel superalloys the search for efficient methods to manufacture of the shaped shell is one of the most considerable problems in aircraft industry [1-5]. However, the automotive industries have the same problem with so-called advanced high-strength steels (AHSS. Due to this, both industrial problems have been examined and the emphasis have been put on the process of liquid forming (hydroforming. The study includes physical tests and the corresponding numerical simulations performed, using the software Eta/Dynaform 5.9. Numerical analysis of the qualitative and quantitative forecasting enables the formability of materials with complex and unusual characteristics of the mechanical properties and forming technology. It has been found that only the computer aided design based on physical and numerical modeling, makes efficient plastic processing possible using a method of hydroforming. Drawability evaluation based on the determination of the mechanical properties of complex characteristics is an indispensable element of this design in the best practice of industrial manufacturing products made of thin sheet metals.

iview: an interactive WebGL visualizer for protein-ligand complex.

Science.gov (United States)

Li, Hongjian; Leung, Kwong-Sak; Nakane, Takanori; Wong, Man-Hon

2014-02-25

Visualization of protein-ligand complex plays an important role in elaborating protein-ligand interactions and aiding novel drug design. Most existing web visualizers either rely on slow software rendering, or lack virtual reality support. The vital feature of macromolecular surface construction is also unavailable. We have developed iview, an easy-to-use interactive WebGL visualizer of protein-ligand complex. It exploits hardware acceleration rather than software rendering. It features three special effects in virtual reality settings, namely anaglyph, parallax barrier and oculus rift, resulting in visually appealing identification of intermolecular interactions. It supports four surface representations including Van der Waals surface, solvent excluded surface, solvent accessible surface and molecular surface. Moreover, based on the feature-rich version of iview, we have also developed a neat and tailor-made version specifically for our istar web platform for protein-ligand docking purpose. This demonstrates the excellent portability of iview. Using innovative 3D techniques, we provide a user friendly visualizer that is not intended to compete with professional visualizers, but to enable easy accessibility and platform independence.

Telling the story of ancient coins by means of interactive RTI images visualization

OpenAIRE

Palma, Gianpaolo; Siotto, Eliana; Proesmans, Marc; Baldassarri, Monica; Baracchini, Clara; Batino, Sabrina; Scopigno, Roberto

2012-01-01

Methodologies for virtual examination of Cultural Heritage artifacts through Reflectance Transformation Imaging (RTI) are gaining interest. Although at the beginning this techniques were designed to aid Cultural Heritage specialists in the inspection and interpretation process, the recent advances of 3D web visualization platforms are increasing our capability to open this type of visual inspection to the ordinary public. We present the design and implementation of a system that provide the a...

Nonlinear dynamics of thin current sheets

International Nuclear Information System (INIS)

Daughton, William

2002-01-01

Observations indicate that the current sheet in the Earth's geomagnetic tail may compress to a thickness comparable to an ion gyro-radius prior to substorm onset. In recent years, there has been considerable controversy regarding the kinetic stability of these thin structures. In particular, the growth rate of the kink instability and its relevance to magnetotail dynamics is still being debated. In this work, a series of fully kinetic particle-in-cell simulations are performed for a thin Harris sheet. The ion to electron mass ratio is varied between m i /m e =4→400 and careful comparisons are made with a formally exact approach to the linear Vlasov theory. At low mass ratio m i /m e <64, the simulations are in excellent agreement with the linear theory, but at high mass ratio the kink instability is observed to grow more rapidly in the kinetic simulations than predicted by theory. The resolution to this apparent discrepancy involves the lower hybrid instability which is active on the edge of the sheet and rapidly produces nonlinear modifications to the initial equilibrium. The nature of this nonlinear deformation is characterized and a simple model is proposed to explain the physics. After the growth and saturation of the lower hybrid fluctuations, the deformed current sheet is similar in structure to a Harris equilibrium with an additional background population. This may explain the large growth rate of the kink instability at later times, since this type of modification to the Harris sheet has been shown to greatly enhance the growth rate of the kink mode

Use of Sexual Material Online and At-Risk Sexual Behavior Regarding HIV/AIDS among College Students

OpenAIRE

Benavides, Raquel A.; Montero, Carolina Valdez; González, Víctor M.; Rodríguez, Dora Julia Onofre

2012-01-01

Use of sexual material online (USMO) by young people has been connected with at-risk sexual behavior for HIV/AIDS. Media Richness and Social Cognitive theories propose that rich media offer more information with interactive and audible visual content, which could have a significant impact on people’s thinking and behavior. The objective was to determine whether USMO presented by rich media has an influence on at-risk sexual behavior for HIV/AIDS. Two hundred young people participated in the s...

Ice Sheet Model Intercomparison Project (ISMIP6) contribution to CMIP6

Science.gov (United States)

Nowicki, Sophie M.J.; Payne, Tony; Larour, Eric; Seroussi, Helene; Goelzer, Heiko; Lipscomb, William; Gregory, Jonathan; Abe-Ouchi, Ayako; Shepherd, Andrew

2018-01-01

Reducing the uncertainty in the past, present and future contribution of ice sheets to sea-level change requires a coordinated effort between the climate and glaciology communities. The Ice Sheet Model Intercomparison Project for CMIP6 (ISMIP6) is the primary activity within the Coupled Model Intercomparison Project – phase 6 (CMIP6) focusing on the Greenland and Antarctic Ice Sheets. In this paper, we describe the framework for ISMIP6 and its relationship to other activities within CMIP6. The ISMIP6 experimental design relies on CMIP6 climate models and includes, for the first time within CMIP, coupled ice sheet – climate models as well as standalone ice sheet models. To facilitate analysis of the multi-model ensemble and to generate a set of standard climate inputs for standalone ice sheet models, ISMIP6 defines a protocol for all variables related to ice sheets. ISMIP6 will provide a basis for investigating the feedbacks, impacts, and sea-level changes associated with dynamic ice sheets and for quantifying the uncertainty in ice-sheet-sourced global sea-level change. PMID:29697697

Production (information sheets)

NARCIS (Netherlands)

2007-01-01

Documentation sheets: Geo energy 2 Integrated System Approach Petroleum Production (ISAPP) The value of smartness 4 Reservoir permeability estimation from production data 6 Coupled modeling for reservoir application 8 Toward an integrated near-wellbore model 10 TNO conceptual framework for "E&P

Altering attentional control settings causes persistent biases of visual attention.

Science.gov (United States)

Knight, Helen C; Smith, Daniel T; Knight, David C; Ellison, Amanda

2016-01-01

Attentional control settings have an important role in guiding visual behaviour. Previous work within cognitive psychology has found that the deployment of general attentional control settings can be modulated by training. However, research has not yet established whether long-term modifications of one particular type of attentional control setting can be induced. To address this, we investigated persistent alterations to feature search mode, also known as an attentional bias, towards an arbitrary stimulus in healthy participants. Subjects were biased towards the colour green by an information sheet. Attentional bias was assessed using a change detection task. After an interval of either 1 or 2 weeks, participants were then retested on the same change detection task, tested on a different change detection task where colour was irrelevant, or were biased towards an alternative colour. One experiment included trials in which the distractor stimuli (but never the target stimuli) were green. The key finding was that green stimuli in the second task attracted attention, despite this impairing task performance. Furthermore, inducing a second attentional bias did not override the initial bias toward green objects. The attentional bias also persisted for at least two weeks. It is argued that this persistent attentional bias is mediated by a chronic change to participants' attentional control settings, which is aided by long-term representations involving contextual cueing. We speculate that similar changes to attentional control settings and continuous cueing may relate to attentional biases observed in psychopathologies. Targeting these biases may be a productive approach to treatment.

DEVELOPING VISUAL NOVEL GAME WITH SPEECH-RECOGNITION INTERACTIVITY TO ENHANCE STUDENTS’ MASTERY ON ENGLISH EXPRESSIONS

Directory of Open Access Journals (Sweden)

Elizabeth Anggraeni Amalo

2017-11-01

Full Text Available The teaching of English-expressions has always been done through conversation samples in form of written texts, audio recordings, and videos. In the meantime, the development of computer-aided learning technology has made autonomous language learning possible. Game, as one of computer-aided learning technology products, can serve as a medium to provide educational contents like that of language teaching and learning. Visual Novel is considered as a conversational game that is suitable to be combined with English-expressions material. Unlike the other click-based interaction Visual Novel Games, the visual novel game in this research implements speech recognition as the interaction trigger. Hence, this paper aims at elaborating how visual novel games are utilized to deliver English-expressions with speech recognition command for the interaction. This research used Research and Development (R&D method with Experimental design through control and experimental groups to measure its effectiveness in enhancing students’ English-expressions mastery. ANOVA was utilized to prove the significant differences between the control and experimental groups. It is expected that the result of this development and experiment can devote benefits to the English teaching and learning, especially on English-expressions.

AID SELECTIVITY PRACTICE AND AID EFFECTIVENESS IN SUB-SAHARAN AFRICA

OpenAIRE

Adedokun, Adeniyi Jimmy; Abiodun O. Folawewo, Abiodun O.

2017-01-01

Foreign aid strategies have undergone restructuring as donors adopt aid selectivity practice to improve aid effectiveness. This study investigates the impact of aid selectivity practice on aid effectiveness (aid-growth relationship) in Sub-Saharan Africa (SSA) and several groups of countries within SSA from 1980 to 2012. Employing system generalized methods of moments (system GMM) technique; the study produces strong evidence that there is significant improvement in aid effectiveness due to a...

Design, installation, and initial use of a smart operator aid

International Nuclear Information System (INIS)

Bernard, J.A.; Lau, S.H.; Kwok, Kwan S.; Kim, Keung Koo

1992-01-01

This paper reviews the design, installation, and initial use of a smart operator aid that was developed to assist licensed personnel with the performance of power adjustments on the 5-MWt MIT Research Reactor (MITR-II). The aid is a computer-generated, predictive display that enables console operators to visualize the consequences of a planned control action prior to implementing that action. The motivation for the development of this display was the observation that present-time control decisions are made by comparing a plant's expected behavior to the desired response. Thus, an operator will achieve proper control only to the degree that he or she is capable of anticipating plant response. This may be difficult if the plant's dynamics are non-linear, time delayed, or counter-intuitive. A study was therefore undertaken at the MITR-II to determine whether operator performance could be improved by using digital technology to provide visual displays of projected plant behavior. It was found that, while the use of predictive information had to be learned, operator performance did improve as a result of its availability. Information is presented on the display's design, the computer system utilized for its implementation, operator response to the display, and the possible extension of this concept to the control of steam generator level. (author)

Design, installation, and initial use of a smart operator aid

Energy Technology Data Exchange (ETDEWEB)

Bernard, J A; Lau, S H; Kwok, Kwan S; Kim, Keung Koo [Nuclear Reactor Laboratory, Massachusetts Institute of Technology, Cambridge, MA (United States)

1992-07-01

This paper reviews the design, installation, and initial use of a smart operator aid that was developed to assist licensed personnel with the performance of power adjustments on the 5-MWt MIT Research Reactor (MITR-II). The aid is a computer-generated, predictive display that enables console operators to visualize the consequences of a planned control action prior to implementing that action. The motivation for the development of this display was the observation that present-time control decisions are made by comparing a plant's expected behavior to the desired response. Thus, an operator will achieve proper control only to the degree that he or she is capable of anticipating plant response. This may be difficult if the plant's dynamics are non-linear, time delayed, or counter-intuitive. A study was therefore undertaken at the MITR-II to determine whether operator performance could be improved by using digital technology to provide visual displays of projected plant behavior. It was found that, while the use of predictive information had to be learned, operator performance did improve as a result of its availability. Information is presented on the display's design, the computer system utilized for its implementation, operator response to the display, and the possible extension of this concept to the control of steam generator level. (author)

Evolution of the MHD sheet pinch

International Nuclear Information System (INIS)

Matthaeus, W.H.; Montgomery, D.

1979-01-01

A magnetohydrodynamic (MHD) problem of recurrent interest for both astrophysical and laboratory plasmas is the evolution of the unstable sheet pinch, a current sheet across which a dc magnetic field reverses sign. The evolution of such a sheet pinch is followed with a spectral-method, incompressible, two-dimensional, MHD turbulence code. Spectral diagnostics are employed, as are contour plots of vector potential (magnetic field lines), electric current density, and velocity stream function (velocity streamlines). The nonlinear effect which seems most important is seen to be current filamentation: the concentration of the current density onto sets of small measure near a mgnetic X point. A great deal of turbulence is apparent in the current distribution, which, for high Reynolds numbers, requires large spatial grids (greater than or equal to (64) 2 ). 11 figures, 1 table

Dipole-sheet multipole magnets for accelerators

International Nuclear Information System (INIS)

Walstrom, P.L.

1993-01-01

The dipole-sheet formalism can be used to describe both cylindrical current-sheet multipole magnets and cylindrical-bore magnets made up of permanent magnet blocks. For current sheets, the formalism provides a natural way of finding a finite set of turns that approximate a continuous distribution. The formalism is especially useful In accelerator applications where large-bore, short, high-field-quality magnets that are dominated by fringe fields are needed. A further advantage of the approach is that in systems with either open or cylindrically symmetric magnetic boundaries, analytical expressions for the three-dimensional fields that are suitable for rapid numerical evaluation can be derived. This development is described in some detail. Also, recent developments in higher-order particle-beam optics codes based on the formalism are described briefly

Influence of temperature fluctuations on equilibrium ice sheet volume

Science.gov (United States)

Bøgeholm Mikkelsen, Troels; Grinsted, Aslak; Ditlevsen, Peter

2018-01-01

Forecasting the future sea level relies on accurate modeling of the response of the Greenland and Antarctic ice sheets to changing temperatures. The surface mass balance (SMB) of the Greenland Ice Sheet (GrIS) has a nonlinear response to warming. Cold and warm anomalies of equal size do not cancel out and it is therefore important to consider the effect of interannual fluctuations in temperature. We find that the steady-state volume of an ice sheet is biased toward larger size if interannual temperature fluctuations are not taken into account in numerical modeling of the ice sheet. We illustrate this in a simple ice sheet model and find that the equilibrium ice volume is approximately 1 m SLE (meters sea level equivalent) smaller when the simple model is forced with fluctuating temperatures as opposed to a stable climate. It is therefore important to consider the effect of interannual temperature fluctuations when designing long experiments such as paleo-spin-ups. We show how the magnitude of the potential bias can be quantified statistically. For recent simulations of the Greenland Ice Sheet, we estimate the bias to be 30 Gt yr-1 (24-59 Gt yr-1, 95 % credibility) for a warming of 3 °C above preindustrial values, or 13 % (10-25, 95 % credibility) of the present-day rate of ice loss. Models of the Greenland Ice Sheet show a collapse threshold beyond which the ice sheet becomes unsustainable. The proximity of the threshold will be underestimated if temperature fluctuations are not taken into account. We estimate the bias to be 0.12 °C (0.10-0.18 °C, 95 % credibility) for a recent estimate of the threshold. In light of our findings it is important to gauge the extent to which this increased variability will influence the mass balance of the ice sheets.

Sheet Beam Klystron Instability Analysis

International Nuclear Information System (INIS)

Bane, K.

2009-01-01

Using the principle of energy balance we develop a 2D theory for calculating growth rates of instability in a two-cavity model of a sheet beam klystron. An important ingredient is a TE-like mode in the gap that also gives a longitudinal kick to the beam. When compared with a self-consistent particle-in-cell calculation, with sheet beam klystron-type parameters, agreement is quite good up to half the design current, 65 A; at full current, however, other, current-dependent effects come in and the results deviate significantly

Bi-directional electrons in the near-Earth plasma sheet

Directory of Open Access Journals (Sweden)

K. Shiokawa

2003-07-01

Full Text Available We have studied the occurrence characteristics of bi-directional electron pitch angle anisotropy (enhanced flux in field-aligned directions, F^ /F|| > 1.5 at energies of 0.1–30 keV using plasma and magnetic field data from the AMPTE/IRM satellite in the near-Earth plasma sheet. The occurrence rate increases in the tailward direction from XGSM = - 9 RE to - 19 RE . The occurrence rate is also enhanced in the midnight sector, and furthermore, whenever the elevation angle of the magnetic field is large while the magnetic field intensity is small, B ~ 15 nT. From these facts, we conclude that the bi-directional electrons in the central plasma sheet are produced mainly in the vicinity of the neutral sheet and that the contribution from ionospheric electrons is minor. A high occurrence is also found after earthward high-speed ion flows, suggesting Fermi-type field-aligned electron acceleration in the neutral sheet. Occurrence characteristics of bi-directional electrons in the plasma sheet boundary layer are also discussed.Key words. Magnetospheric physics (magnetospheric configuration and dynamics; magnetotail; plasma sheet

Firm Investment and Balance-Sheet Problems in Japan

OpenAIRE

Toshitaka Sekine

1999-01-01

This paper investigates whether balance-sheet conditions of firms and their main banks matter for firm investment behavior using dynamic corporate panel data in Japan for the period 1985-95. It finds that smaller non-bond issuing firms were facing liquidity constraints; these firms’ balance-sheet conditions (the debt asset ratios) affected their investment from the midst of the bubble era by influencing main banks’ lending to them; and the deterioration of their main banks’ balance-sheet cond...

Constructing a relevant decision aid for parents of children with bronchopulmonary dysplasia.

Science.gov (United States)

Skibo, M; Guillen, U; Zhang, H; Munson, D; Mackley, A; Nilan, K; Kirpalani, H

2017-12-01

To develop and test a decision aid for counseling parents of children with bronchopulmonary dysplasia (BPD).Local problem:Parental education about complex conditions is not standardized and communication and understanding may not be adequate. Semi-structured interviews were conducted with 33 neonatal clinicians and 12 parents of children with BPD using a qualitative research design. The interviews were used to identify education topics that were felt to be important in BPD education. These topics were then used to create a visual decision aid to be used in counseling sessions with parents. The decision aid was then used in mock counseling sessions with 15 'experienced' participants and 7 'naïve' participants to assess its efficacy. The participants completed a pre and post test to assess change in knowledge as well as an 11-question Likert style acceptability survey. Implementation of a decision aid while educating parents about BPD. Topics identified during the interviews were used to create eight educational cards which included pictures, pictographs and statistics. Overall, participants thought the decision aid contained an appropriate amount of information, were easy to understand and improved their knowledge about BPD. Testing demonstrated a significant increase in knowledge in both the 'experienced' (Pdecision aid for parents of children with BPD may improve understanding of the condition and help facilitate communication between parents and doctors.

The quantitative inspection of iron aluminide green sheet using transient thermography

International Nuclear Information System (INIS)

Watkins, Michael L.; Hinders, Mark K.; Scorey, Clive; Winfree, William

1999-01-01

The recent development of manufacturing techniques for the fabrication of thin iron aluminide, FeAl, sheet requires advanced quantitative methods for on-line inspection. An understanding of the mechanisms responsible for flaws and the development of appropriate flaw detection methods are key elements in an effective quality management system. The first step in the fabrication of thin FeAl alloy sheet is the formation of a green sheet, either by cold rolling or tape casting FeAl powder mixed with organic binding agents. The finished sheet is obtained using a series of process steps involving binder elimination, densification, sintering, and annealing. Non-uniformities within the green sheet are the major contributor to material failure in subsequent sheet processing and the production of non-conforming finished sheet. Previous work has demonstrated the advantages of using active thermography to detect the flaws and heterogeneity within green powder composites (1)(2)(3). The production environment and physical characteristics of these composites provide for unique challenges in developing a rapid nondestructive inspection capability. Thermography is non-contact and minimizes the potential damage to the fragile green sheet. Limited access to the material also demands a one-sided inspection technique. In this paper, we will describe the application of thermography for 100% on-line inspection within an industrial process. This approach is cost competitive with alternative technologies, such as x-ray imaging systems, and provides the required sensitivity to the variations in material composition. The formation of green sheet flaws and their transformation into defects within intermediate and finished sheet products will be described. A green sheet conformance criterion will be presented which would significantly reduce the probability of processing poor quality green sheet which contributes to higher waste and inferior bulk alloy sheet

Estudo comparativo do LCR de pacientes com neurocriptococose sem AIDS e com AIDS Comparison between CSF samples from AIDS and non-AIDS patients with neurocryptococcosis

Directory of Open Access Journals (Sweden)

João Baptista dos Reis-Filho

1994-06-01

Full Text Available Até a década de 80, antes do surgimento da AIDS, a criptococose era relativamente rara. Verificou-se que esta doença afeta muito frequentemente os pacientes com AIDS e pode ser a primeira manifestação desta síndrome. O objetivo deste trabalho é o de comparar o resultado dos exames das amostras do LCR inicial na meningencefalite por criptococo entre pacientes com e sem AIDS. Este trabalho é baseado no estudo de 41 pacientes com neurocriptococose sem AIDS e de 23 pacientes com neurocriptococose e AIDS. Este estudo permitiu verificar que a reação inflamatória, no sistema nervoso, quando presente, foi de menor intensidade nos pacientes com AIDS; a reação inflamatória esteve presente em todos os pacientes sem AIDS e ausente em 21,7% dos pacientes com AIDS; o quadro inflamatório crônico, semelhante ao da meningencefalite tuberculosa, clássico nas meningencefalites por criptococo, ocorreu raramente nos pacientes com AIDS; em média, o número de criptococos no LCR foi maior nos pacientes com AIDS; pode ser feito diagnóstico presuntivo da AIDS quando o criptococo estiver presente no LCR que não apresenta alterações citológicas e bioquímicas.Neurocryptococcosis was a rare nervous system infection. With the rising number of patients with AIDS it became a very frequent disease. This infection is supposed to infect patients with some kind of immunodeficiency and the CSF alterations often simulate tuberculous meningitis. The purpose of this research was to compare the CSF changes in AIDS and non-AIDS patients with meningoencephalitis caused by Cr. neoformans. There were analysed 41 CSF samples from non-AIDS patients with neurocryptococcosis and 23 CSF samples from AIDS patients with neurocryptococcosis. The results of this research allowed to conclude that the inflammatory changes in the CSF from AIDS patients showed a lower intensity compared to those non-AIDS patients. These results showed as well, that the CSF samples from non-AIDS

Aid Effectiveness

DEFF Research Database (Denmark)

Arndt, Channing; Jones, Edward Samuel; Tarp, Finn

of the main relationships; (ii) estimating the impact of aid on a range of final and intermediate outcomes; and (iii) quantifying a simplied representation of the full structural form, where aid impacts on growth through key intermediate outcomes. A coherent picture emerges: aid stimulates growth and reduces......Controversy over the aggregate impact of foreign aid has focused on reduced form estimates of the aid-growth link. The causal chain, through which aid affects developmental outcomes including growth, has received much less attention. We address this gap by: (i) specifying a structural model...... poverty through physical capital investment and improvements in health....

Antibubbles and fine cylindrical sheets of air

NARCIS (Netherlands)

Beilharz, D.; Guyon, A.; Li, E.Q.; Thoraval, Marie-Jean; Thoroddsen, S.T.

2015-01-01

Drops impacting at low velocities onto a pool surface can stretch out thin hemispherical sheets of air between the drop and the pool. These air sheets can remain intact until they reach submicron thicknesses, at which point they rupture to form a myriad of microbubbles. By impacting a