WorldWideScience

Sample records for shade matching performance

  1. Influence of Gender on Visual Shade Matching in Dentistry.

    Science.gov (United States)

    Pecho, Oscar E; Ghinea, Razvan; Perez, Maria M; Della Bona, Alvaro

    2017-04-01

    Accuracy on visual shade matching (VSM) is one of the most difficult procedures in esthetic dentistry. Some variables can influence on this process and gender is one of the most controversial. This observational study evaluated the influence of gender on accuracy of VSM. One-hundred observers (65 females and 35 males) shade matched four human upper central incisors (UCI) to shade tabs from Vita Classical (VC) shade guide. In addition, the spectral reflectance values from the four UCI and from the 16 VC shade tabs were measured using a spectroradiometer (SP). Measurements were performed over a gray background, inside a viewing booth and under D65 illuminant (diffuse/0º geometry). CIELAB coordinates (L*, a*, and b*) were calculated according to CIE D65 illuminant and CIE 2º Standard Observer. Instrumental shade matching for each UCI, based on minimum color difference, was performed using two color difference metrics (CIELAB and CIEDE2000(2:1:1)). Data was analyzed using descriptive statistics and McNemar test (α = 0.05). Irrespective of the color difference metric, the most prevalent shade performed by females showed greater success (50% for CIELAB and 100% for CIEDE2000(2:1:1)) than males (25% for CIELAB and 50% for CIEDE2000(2:1:1)). However, such difference on gender was statistically significant only when using CIEDE2000(2:1:1) color difference metric (p ≤ 0.05). The most prevalent shade option resultant from VSM performed by females using VC shade guide perfectly agreed (100% success rate) with measurements from SP and CIEDE2000(2:1:1) color difference metric. The ability to understand and distinguish color differences in VSM is critical in clinical dentistry. Variation in shade perception due to observer gender can be minimized using additional observers and/or improving shade matching ability. (J Esthet Restor Dent 29:E15-E23, 2017). © 2017 Wiley Periodicals, Inc.

  2. Comparison of accuracies of an intraoral spectrophotometer and conventional visual method for shade matching using two shade guide systems.

    Science.gov (United States)

    Parameswaran, Vidhya; Anilkumar, S; Lylajam, S; Rajesh, C; Narayan, Vivek

    2016-01-01

    This in vitro study compared the shade matching abilities of an intraoral spectrophotometer and the conventional visual method using two shade guides. The results of previous investigations between color perceived by human observers and color assessed by instruments have been inconclusive. The objectives were to determine accuracies and interrater agreement of both methods and effectiveness of two shade guides with either method. In the visual method, 10 examiners with normal color vision matched target control shade tabs taken from the two shade guides (VITAPAN Classical™ and VITAPAN 3D Master™) with other full sets of the respective shade guides. Each tab was matched 3 times to determine repeatability of visual examiners. The spectrophotometric shade matching was performed by two independent examiners using an intraoral spectrophotometer (VITA Easyshade™) with five repetitions for each tab. Results revealed that visual method had greater accuracy than the spectrophotometer. The spectrophotometer; however, exhibited significantly better interrater agreement as compared to the visual method. While VITAPAN Classical shade guide was more accurate with the spectrophotometer, VITAPAN 3D Master shade guide proved better with visual method. This in vitro study clearly delineates the advantages and limitations of both methods. There were significant differences between the methods with the visual method producing more accurate results than the spectrophotometric method. The spectrophotometer showed far better interrater agreement scores irrespective of the shade guide used. Even though visual shade matching is subjective, it is not inferior and should not be underrated. Judicious combination of both techniques is imperative to attain a successful and esthetic outcome.

  3. Comparison of Shade Match Compatibility between Vitapan Classical and 3D Master Shade Guide Systems by Dental Students in Tabriz Faculty of Dentistry

    Directory of Open Access Journals (Sweden)

    Ramin Negahdari

    2016-01-01

    Full Text Available Background and Aims: Dentists perform color-match process during indirect and direct restorations. Color research has shown that shade guides do not always match the color of natural teeth. Moreover, visual evaluation of dental colors has been found to be inconsistent and unreliable. In fact, it has always been important when using different shade guides. Our purpose in this study was to compare shade selection using two shade guide systems of Vitapan Classical and 3D Master by dental students of Tabriz University of Medical Sciences. Materials and methods: In this analytical, cross-sectional descriptive study, 20 male and 20 female senior dental students with a little clinical experience in working with shade guides were selected. Each student used two shade guides (Vitapan Classical and 3D Master separately for shade matching. Shade selection was randomly repeated one week later by the same protocol. T-test was used to compare repeatability of color matching (α=0.05. Comparison of the repeatability percentage was done with t-test. Results: Comparison of repeatability percentages of shade matching irrespective of gender showed that percentage of repeatability of shade match in 3D Master system was significantly high (P=0.00. In addition comparison of repeatability means of shade match with different shade guide systems on the basis of gender showed no significant differences (P=0.68. Conclusion: In general, the repeatability percentages of shade matching in 3D Master system was high and shade matching in females with this system was not different than males.   Key words: Color vision; indirect restorations; dental students

  4. The Influence of Dental Shade Guides and Experience on the Accuracy of Shade Matching.

    Science.gov (United States)

    Nakhaei, Mohammadreza; Ghanbarzadeh, Jalil; Amirinejad, Sahar; Alavi, Samin; Rajatihaghi, Hamidreza

    2016-01-01

    There is limited and inconsistent information on some factors affecting visual shade selection. The aim of this study was to evaluate the influence of shade guide type and professional experience on shade-matching results. Thirty Dental students (DS), 30 General dentists (GDs) and 30 Dental specialists (S) participated in this study. The participants were asked to match six target tabs using two dental shade guides: Vitapan Classical (VC) and Vitapan 3D-Master (3D). An intraoral spectrophotometer was used for color measurement of target tabs and selected tabs. The color difference (ΔE) values between the target tab and selected tab were calculated. Data were analyzed using analysis of variance (ANOVA) and paired f-test (α = 0.05). Results of the first five best matches for each target tab were expressed as ΔE1 to ΔE5. Differences in the mean values of ΔE1 to ΔE5 between VC and 3D were compared using descriptive statistics. There were no significant differences among the three participating groups in ΔE values when the 3D was used (p = 0.389). However, significant differences were found with VC (p Contemp Dent Pract 2016;17(1):22-26. Source of support: This study was supported by a grant (No. 920903) from the Vice Chancellor for Research of Mashhad University of Medical Sciences. The results presented here are based on undergraduate thesis (No. 2686) submitted to Mashhad School of Dentistry and Dental Research Center. None.

  5. Differences between the human eye and the spectrophotometer in the shade matching of tooth colour.

    Science.gov (United States)

    Gómez-Polo, Cristina; Gómez-Polo, Miguel; Celemin-Viñuela, Alicia; Martínez Vázquez De Parga, Juan Antonio

    2014-06-01

    The aim of this work was to assess the agreement between instrumental and visual colour matching. Shade selection with the 3DMaster Toothguide (Vita-Zahnfabrik) was performed for 1361 maxillary central incisors and compared with the shade obtained with the EasyShade Compact (Vita-Zahnfabrik) spectrophotometer. We observed a greater correlation between the objective method and the subjective one in the colour dimension of lightness (Kappa 0.6587), followed by hue (Kappa 0.4337) and finally chroma (Kappa 0.3578). The colour dimension in which the greatest agreement is seen between the operator and the spectrophotometer is value or lightness. This study reveals differences between the measurement of colour via spectrophotometry and the visual shade selection method. According to our results, there is better agreement in the value or lightness colour dimension, which is the most important one in the choice of tooth colour. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Satisfaction of Dental Students, Faculty, and Patients with Tooth Shade-Matching Using a Spectrophotometer.

    Science.gov (United States)

    Ballard, Erin; Metz, Michael J; Harris, Bryan T; Metz, Cynthia J; Chou, Jang-Ching; Morton, Dean; Lin, Wei-Shao

    2017-05-01

    The aims of this study were to evaluate dental students' clinical shade-matching outcomes (from subjective use of shade guide) with an objective electronic shade-matching tool (spectrophotometer); to assess patients', students', and supervising faculty members' satisfaction with the clinical shade-matching outcomes; and to assess clinicians' support for use of the spectrophotometer to improve esthetic outcomes. A total of 103 volunteer groups, each consisting of patient, dental student, and supervising faculty member at the University of Louisville, were recruited to participate in the study in 2015. Using the spectrophotometer, clinical shade-matching outcome (ΔE clinical ) and laboratory shade-matching outcome (ΔE laboratory ) were calculated. Two five-point survey items were used to assess the groups' satisfaction with the clinical shade-matching outcome and support for an objective electronic shade-matching tool in the student clinic. The results showed that both ΔE clinical (6.5±2.4) and ΔE laboratory (4.3±2.0) were outside the clinical acceptability threshold ΔE values of 2.7, when visual shade-matching method (subjective usage of shade guide) was used to fabricate definitive restorations. Characteristics of the patients, dental students, supervising faculty members, and restorations had minimal to no effect on the ΔE clinical The patients, dental students, and supervising faculty members generally had positive opinions about the clinical shade-matching outcome, despite the increased ΔE clinical observed. Overall, clinical shade-matching outcomes in this school need further improvement, but the patients' positive opinions may indicate the need to revisit the acceptability threshold ΔE value of 2.7 in the academic setting.

  7. Comparison of accuracies of an intraoral spectrophotometer and conventional visual method for shade matching using two shade guide systems

    Directory of Open Access Journals (Sweden)

    Vidhya Parameswaran

    2016-01-01

    Conclusion: This in vitro study clearly delineates the advantages and limitations of both methods. There were significant differences between the methods with the visual method producing more accurate results than the spectrophotometric method. The spectrophotometer showed far better interrater agreement scores irrespective of the shade guide used. Even though visual shade matching is subjective, it is not inferior and should not be underrated. Judicious combination of both techniques is imperative to attain a successful and esthetic outcome.

  8. Accuracy of Three Shade-matching Devices in Replicating the Shade of Metal Ceramic Restorations: An in vitro Study.

    Science.gov (United States)

    Lakhanpal, Shruti; Neelima, Menon S

    2016-12-01

    In restorative dentistry, the clinician commonly encounters the challenge of replicating the color of natural teeth due to the subjectivity of perceptual evaluation. Recent advances in photography and computing have resulted in the widespread use of the digital camera for color imaging. These instruments can be used effectively for shade matching and communication to yield predictable results. The study sample consisted of 20 freshly extracted noncarious premolars. The Commission Internationale de l'Eclairage (CIE) L*a*b* values of the tooth were obtained through a spectrophotometer, digital camera, and digital camera with a polarizer. Shade selection was carried out using VITA 3D Master and calculating the Euclidian distance. The fabricated metal ceramic crowns were then evaluated to check the shade replication by comparing the CIE L*a*b* values of the crowns with the reference shade tab images. The three-way analysis of variance (ANOVA) and comparative analysis using Bonferroni test reveals that the difference in the mean L*a* values between spectrophotometer and polarization dental imaging modality (PDIM) was insignificant. The difference in the mean L*a*b* of spectrophotometer and digital camera was statistically significant. The mean ΔE for metal ceramic crowns and shade tabs was 4.2 that was greater than the clinically acceptable level (3.2). A statistically significant correlation was found to exist between the spectrophotometer and PDIM for all CIE L*, a*, and b* color coordinates. The present study was undertaken to assess the shade-matching ability of three shade-matching devices, such as spectrophotometer, digital camera, and PDIM, in the accuracy of replication of metal ceramic restorations.

  9. Technique to Match Gingival Shade when Using Pink Ceramics for Anterior Fixed Implant Prostheses.

    Science.gov (United States)

    Papaspyridakos, Panos; Amin, Sarah; El-Rafie, Khaled; Weber, Hans-Peter

    2018-03-01

    Use of pink gingival ceramics can reduce the necessity for extensive surgical procedures attempting to restore missing soft and hard tissues in the maxillary esthetic zone. Selecting the appropriate shade for pink porcelain poses a challenge, especially when the patient presents with a high smile line. This paper describes a simple and effective technique to facilitate shade selection for gingival ceramics to match the patient's existing gingival shade. © 2016 by the American College of Prosthodontists.

  10. Matching Shades of Forest Environment to sustain Crude Fibre and ...

    African Journals Online (AJOL)

    Five different types of shades were employed as experimental treatments using the Randomized Complete Block Design (RCBD). The natural forest condition served as a control. Samples of the edible parts from the domesticated and wild Vegetables were harvested for laboratory analysis for calcium, zinc, iron and crude ...

  11. In vitro and in vivo evaluations of three computer-aided shade matching instruments.

    Science.gov (United States)

    Yuan, Kun; Sun, Xiang; Wang, Fu; Wang, Hui; Chen, Ji-hua

    2012-01-01

    This study evaluated the accuracy and reliability of three computer-aided shade matching instruments (Shadepilot, VITA Easyshade, and ShadeEye NCC) using both in vitro and in vivo models. The in vitro model included the measurement of five VITA Classical shade guides. The in vivo model utilized three instruments to measure the central region of the labial surface of maxillary right central incisors of 85 people. The accuracy and reliability of the three instruments in these two evaluating models were calculated. Significant differences were observed in the accuracy of instruments both in vitro and in vivo. No significant differences were found in the reliability of instruments between and within the in vitro and the in vivo groups. VITA Easyshade was significantly different in accuracy between in vitro and in vivo models, while no significant difference was found for the other two instruments. Shadepilot was the only instrument tested in the present study that showed high accuracy and reliability both in vitro and in vivo. Significant differences were observed in the L*a*b* values of the 85 natural teeth measured using three instruments in the in vivo assessment. The pair-agreement rates of shade matching among the three instruments ranged from 37.7% to 48.2%, and the incidence of identical shade results shared by all three instruments was 25.9%. As different L*a*b* values and shade matching results were reported for the same tooth, a combination of the evaluated shade matching instruments and visual shade confirmation is recommended for clinical use.

  12. A study on reproducing silicone shade guide for maxillofacial prostheses matching Indian skin color

    Directory of Open Access Journals (Sweden)

    Guttal Satyabodh

    2008-01-01

    Full Text Available Aim: The value and success of a well-fitting and anatomically correct prosthesis are compromised if the color does not match the adjoining tissues. The use of powder colors to help develop a simplified silicone shade guide to aid in the fabrication of silicone facial prostheses for Indian patients has been described here. Materials and Methods: Ten powder pigments were used to fabricate the silicone samples for three different subjects having light, medium and dark complexions who were separated into three groups depending on the value of their shades. Four-step wedge silicone samples with thickness variations of 1, 2, 4 and 6mm were fabricated. Visual assessment of the samples was done by four evaluators to check the agreement of color match. Data was statistically analyzed using kappa coefficients. Results: The kappa values were found to be 0.09-0.44 for a light skin tone, -0.11 to 0.77 for medium skin and 0.44 to 0.85 for dark skin tones. This study showed that the samples of dark skin tone matched the skin tone well and showed a statistically good agreement. To further test the validity of these shade guides, facial silicone veneers were fabricated for three patients having light, medium and dark complexion. The color matching showed satisfactory results. Conclusion: The silicone veneers matched the skin color of all three patients. Hence, this shade guide will help clinicians to obtain a good intrinsic shade and minimize extrinsic coloration.

  13. Prevalence of Colour Vision Anomalies Amongst Dental Professionals and its Effect on Shade Matching of Teeth

    Science.gov (United States)

    Maini, Anuj Paul; Wangoo, Anuj; Singh, Sukhman; Mehar, Damanpreet Kaur

    2017-01-01

    Abstract Introduction The success of a restoration is dependent on accurate shade matching of teeth leading to studies evaluating the factors affecting the perception of shades. Colour vision anomalies including colour blindness have been found to exist in the population and it has been thought to be a potential factor affecting the colour perception ability. Aim The present study was done to evaluate the prevalence of colour vision anomalies and its effect on matching of shades of teeth. Materials and Methods A total of 147 dental professionals were randomly selected for the study and were first tested for visual acuity using the Snellen’s Eye Chart so as to carry on the study with only those operators who had a vision of 6/6. Then, the Ishihara’s colour charts were used to test the operators for colour vision handicap. In the last stage of the study, test for accuracy of shade selection was done using the Vitapan Classical shade guide. The shade guide tabs were covered to avoid bias. Percentage was used to calculate the prevalence of colour vision handicap and its effect on matching of shades of teeth as compared to normal vision, which was evaluated using Chi square test. Results Nineteen operators had colour vision anomalies out of hundred operators and only two operators presented with colour blindness. Colour vision anomaly was more prevalent than colour blindness and it was also found that it was more prevalent in males than females. The difference between the accuracy of shade matching between the operators with normal vision and colour vision defect and operators with normal vision and colour blindness was statistically not significant. Conclusion Colour blindness and colour vision handicap are rare conditions, with the latter being more common in the population. According to our study, it was concluded that no statistically significant difference existed amongst the operators with normal vision and colour vision anomaly or operators with normal vision

  14. Randomized multi-centre study on the effect of training on tooth shade matching.

    Science.gov (United States)

    Olms, C; Klinke, Th; Pirek, P; Hannak, W B

    2013-12-01

    The aim of this study was to find out whether Toothguide Trainer, TT, and Toothguide Training Box, TTB, show any training effects, independent of the shade guide chosen. Students from four dental schools (N=78) were included in this study. The participants were randomized into a study, 42 students (age range: 19-27 years; 69% female, 31% male) and a control group of 36 students (age range: 19-30 years; 57% female, 43% male). The study group started with a double blind introduction test, followed by the TT and TTB training, finishing with the final test. The control group only passed the introduction and - after a break - the final test. Eight randomly chosen samples, seven of the Vita classical and one of the 3D-Master colour scale, were marked by barcodes. Colour matching was arranged by the Vita classical scale. The results of the pre- and final tests of both groups were combined. For every sample, the value ΔE was determined. The summation of all eight samples from the introduction and final tests offered a summarized ΔE value. The differences between introduction and final tests revealed the individual learning success. 47.6% of the study group showed statistically significant better results than the control group, 33% (p=0.031). TT and TTB show a positive effect of training on tooth shade matching independent of the colour scale used. Visual shade taking is the most frequent clinical method for shade determination. To increase better results in visual colour matching, TT and TTB training is used. This is the first study examining the training effect of TT and TTB using Vita classical scale. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Performance Improvement of Partially Shaded Photovoltaic Arrays under Moving Shadow Conditions through Shade Dispersion

    Science.gov (United States)

    Vijayalekshmy, S.; Bindu, G. R.; Rama Iyer, S.

    2016-12-01

    Photovoltaic arrays, which are prone to partial shading (PS) reduce the output power than the real power rating of the array. This paper presents the comparative analyses on the electrical characteristics and power losses of a conventional totally cross tied (TCT) configuration, and rearranged TCT (RTCT) in which the modules are physically rearranged in such a way that there is an improvement of power output of array under moving illumination condition (moving cloud). In RTCT, the physical position of the modules is organized based on the Sudoku puzzle pattern so as to scatter the shading effect over the entire array. The rearrangement of modules is performed without varying the electrical connection of the modules in the array. It is validated that the power generation of array under amoving shadow condition is enhanced and the various PS losses are reduced in rearranged configuration.

  16. Shading Performance on Terraced House Facades in Putrajaya, Malaysia

    Directory of Open Access Journals (Sweden)

    Hassan Ahmad Sanusi

    2015-01-01

    Full Text Available This study evaluates shading performance on house facades of selected three terraced houses in Putrajaya, Malaysia as the case studies. Terraced house type is selected for the case study because it is the most popular house type built in this country to house an increase of the urban population. Its total number built in urban area increases from 27% of the total dwellings in 1980 to 40% in 1990, and to slightly more than 60 per cent in 2000. The Case Study A, B, and C are atypical style of terraced house facade designs built in Putrajaya. These postmodern designs exhibit a range of complex geometric elements blending of colonial and traditional elements with colorful styles on the house facade. In this study, the time at which the sun path perpendicular to the house facade will be used to gain the results of shading performances when the house facades have their maximum exposure to the direct sunlight. The house facade was divided into two main parts which are opaque and glazing surface elements. The amount of shading area on the opaque and glazing surface was simulated using the SunTool program. In conclusion, the Case Study C had the highest average percentage of the shading area, which is 64.43%, followed by the Case Study A 60.41% and Case Study B 56.29%. These results showed that the facade designs had excellent horizontal shading elements with roof overhangs for high angle sunlight but they had weak vertical shading elements due to a lack of considerations of louvered elements to block low angle sunlight.

  17. An hourly based performance comparison of an integrated micro-structural perforated shading screen with standard shading systems

    DEFF Research Database (Denmark)

    Appelfeld, David; McNeil, Andrew; Svendsen, Svend

    2012-01-01

    This article evaluates the performance of an integrated micro structural perforated shading screen (MSPSS). Such a system maintains a visual connection with the outdoors while imitating the shading functionality of a venetian blind. Building energy consumption is strongly influenced by the solar...... gains and heat transfer through the transparent parts of the fenestration systems. MSPSS is angular-dependent shading device that provides an effective strategy in the control of daylight, solar gains and overheating through windows. The study focuses on using direct experimental methods to determine bi......-directional transmittance properties of shading systems that are not included as standard shading options in readily available building performance simulation tools. The impact on the indoor environment, particularly temperature and daylight were investigated and compared to three other static complex fenestration systems...

  18. Analysis of Shade Matching in Natural Dentitions Using Intraoral Digital Spectrophotometer in LED and Filtered LED Light Sources.

    Science.gov (United States)

    Chitrarsu, Vijai Krishnan; Chidambaranathan, Ahila Singaravel; Balasubramaniam, Muthukumar

    2017-10-31

    To evaluate the shade matching capabilities in natural dentitions using Vita Toothguide 3D-Master and an intraoral digital spectrophotometer (Vita Easyshade Advance 4.0) in various light sources. Participants between 20 and 40 years old with natural, unrestored right maxillary central incisors, no history of bleaching, orthodontic treatment, or malocclusion and no rotations were included. According to their shades, subjects were randomly selected and grouped into A1, A2, and A3. A total of 100 participants (50 male and 50 female) in each group were chosen for this study. Shade selection was made between 10 am and 2 pm for all light sources. The same examiner selected the shade of natural teeth with Vita Toothguide 3D-Master under natural light within 2 minutes. Once the Vita Toothguide 3D-Masterwas matched with the maxillary right central incisor, the L*, a*, and b* values, chroma, and hue were recorded with Vita Easyshade Advance 4.0 by placing it on the shade tab under the same light source. The values were statistically analyzed using one-way ANOVA and Tukey's HSD post hoc test with SPSS v22.0 software. The mean ∆E* ab values for shades A1, A2, and A3 for groups 1, 2, and 3 were statistically significantly different from each other (p spectrophotometer showed statistically significant differences in shade matching compared to Vita Toothguide 3D-Master. Incandescent light showed more accurate shade matching than the filtered LED, LED, and daylight. © 2017 by the American College of Prosthodontists.

  19. Simplified Method for Modeling the Impact of Arbitrary Partial Shading Conditions on PV Array Performance: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    MacAlpine, Sara; Deline, Chris

    2015-09-15

    It is often difficult to model the effects of partial shading conditions on PV array performance, as shade losses are nonlinear and depend heavily on a system's particular configuration. This work describes and implements a simple method for modeling shade loss: a database of shade impact results (loss percentages), generated using a validated, detailed simulation tool and encompassing a wide variety of shading scenarios. The database is intended to predict shading losses in crystalline silicon PV arrays and is accessed using basic inputs generally available in any PV simulation tool. Performance predictions using the database are within 1-2% of measured data for several partially shaded PV systems, and within 1% of those predicted by the full, detailed simulation tool on an annual basis. The shade loss database shows potential to considerably improve performance prediction for partially shaded PV systems.

  20. Effects of individual factors and the training process of the shade-matching ability of dental students

    Directory of Open Access Journals (Sweden)

    Nuray Capa

    2011-09-01

    Conclusions: The shade-matching ability of dental students seemed to improve with more education because of the inclusion of clinical practice in the educational program. However, gender, eye color, and the use of eye glasses or contact lenses had no influence.

  1. Effects of street tree shade on asphalt concrete pavement performance

    Science.gov (United States)

    E.G. McPherson; J. Muchnick

    2005-01-01

    Forty-eight street segments were paired into 24 high-and low-shade pairs in Modesto, California, U.S. Field data were collected to calculate a Pavement Condition Index (PCI) and Tree Shade Index (TSI) for each segment. Statistical analyses found that greater PCI was associated with greater TSI, indicating that tree shade was partially responsible for reduced pavement...

  2. Experimental study of the effect of fully shading on the Solar PV module performance

    Science.gov (United States)

    Al-chaderchi, Monadhil; Sopain, K.; Alghoul, M. A.; Salameh, T.

    2017-11-01

    Experimental tests were performed to study the effects of shading for different string inside the photovoltaic (PV) panels, power equipped with different number of diodes from the same manufacturer as of solar panel. The IV curve for all cases were recorded to see how the bypass diodes will reduce the effects of shading .The case for 3 by pass diode show the best performance of solar PV module under shading phenomena.

  3. The effects of drought and shade on the performance, morphology and physiology of Ghanaian tree species.

    Directory of Open Access Journals (Sweden)

    Lucy Amissah

    Full Text Available In tropical forests light and water availability are the most important factors for seedling growth and survival but an increasing frequency of drought may affect tree regeneration. One central question is whether drought and shade have interactive effects on seedling growth and survival. Here, we present results of a greenhouse experiment, in which seedlings of 10 Ghanaian tree species were exposed to combinations of strong seasonal drought (continuous watering versus withholding water for nine weeks and shade (5% irradiance versus 20% irradiance. We evaluated the effects of drought and shade on seedling survival and growth and plasticity of 11 underlying traits related to biomass allocation, morphology and physiology. Seedling survival under dry conditions was higher in shade than in high light, thus providing support for the "facilitation hypothesis" that shade enhances plant performance through improved microclimatic conditions, and rejecting the trade-off hypothesis that drought should have stronger impact in shade because of reduced root investment. Shaded plants had low biomass fraction in roots, in line with the trade-off hypothesis, but they compensated for this with a higher specific root length (i.e., root length per unit root mass, resulting in a similar root length per plant mass and, hence, similar water uptake capacity as high-light plants. The majority (60% of traits studied responded independently to drought and shade, indicating that within species shade- and drought tolerances are not in trade-off, but largely uncoupled. When individual species responses were analysed, then for most of the traits only one to three species showed significant interactive effects between drought and shade. The uncoupled response of most species to drought and shade should provide ample opportunity for niche differentiation and species coexistence under a range of water and light conditions. Overall our greenhouse results suggest that, in the

  4. Performance assessment of Vita Easy Shade spectrophotometer on colour measurement of aesthetic dental materials.

    Science.gov (United States)

    AlGhazali, N; Burnside, G; Smith, R W; Preston, A J; Jarad, F D

    2011-12-01

    Four different shades were used to produce 20 samples of resin-based composite and 20 samples of porcelain to evaluate the performance ability of an intra oral test spectrophotometer compared to a reference spectrophotometer. The absolute colour coordinates CIELAB values measured with both spectrophotometers were significantly different (p spectrophotometers (p < 0.05). Therefore, the Easy Shade can be used in dental practice and dental research with some limitations.

  5. Photovoltaic Shading Testbed for Module-Level Power Electronics: 2016 Performance Data Update

    Energy Technology Data Exchange (ETDEWEB)

    Deline, Chris [National Renewable Energy Lab. (NREL), Golden, CO (United States); Meydbray, Jenya [PV Evolution Labs (PVEL), Davis, CA (United States); Donovan, Matt [PV Evolution Labs (PVEL), Davis, CA (United States)

    2016-09-01

    The 2012 NREL report 'Photovoltaic Shading Testbed for Module-Level Power Electronics' provides a standard methodology for estimating the performance benefit of distributed power electronics under partial shading conditions. Since the release of the report, experiments have been conducted for a number of products and for different system configurations. Drawing from these experiences, updates to the test and analysis methods are recommended. Proposed changes in data processing have the benefit of reducing the sensitivity to measurement errors and weather variability, as well as bringing the updated performance score in line with measured and simulated values of the shade recovery benefit of distributed PV power electronics. Also, due to the emergence of new technologies including sub-module embedded power electronics, the shading method has been extended to include power electronics that operate at a finer granularity than the module level. An update to the method is proposed to account for these emerging technologies that respond to shading differently than module-level devices. The partial shading test remains a repeatable test procedure that attempts to simulate shading situations as would be experienced by typical residential or commercial rooftop photovoltaic (PV) systems. Performance data for multiple products tested using this method are discussed, based on equipment from Enphase, Solar Edge, Maxim Integrated and SMA. In general, the annual recovery of shading losses from the module-level electronics evaluated is 25-35%, with the major difference between different trials being related to the number of parallel strings in the test installation rather than differences between the equipment tested. Appendix D data has been added in this update.

  6. Determining the energy performance of manually controlled solar shades: A stochastic model based co-simulation analysis

    International Nuclear Information System (INIS)

    Yao, Jian

    2014-01-01

    Highlights: • Driving factor for adjustment of manually controlled solar shades was determined. • A stochastic model for manual solar shades was constructed using Markov method. • Co-simulation with Energyplus was carried out in BCVTB. • External shading even manually controlled should be used prior to LOW-E windows. • Previous studies on manual solar shades may overestimate energy savings. - Abstract: Solar shading devices play a significant role in reducing building energy consumption and maintaining a comfortable indoor condition. In this paper, a typical office building with internal roller shades in hot summer and cold winter zone was selected to determine the driving factor of control behavior of manual solar shades. Solar radiation was determined as the major factor in driving solar shading adjustment based on field measurements and logit analysis and then a stochastic model for manually adjusted solar shades was constructed by using Markov method. This model was used in BCVTB for further co-simulation with Energyplus to determine the impact of the control behavior of solar shades on energy performance. The results show that manually adjusted solar shades, whatever located inside or outside, have a relatively high energy saving performance than clear-pane windows while only external shades perform better than regularly used LOW-E windows. Simulation also indicates that using an ideal assumption of solar shade adjustment as most studies do in building simulation may lead to an overestimation of energy saving by about 16–30%. There is a need to improve occupants’ actions on shades to more effectively respond to outdoor conditions in order to lower energy consumption, and this improvement can be easily achieved by using simple strategies as a guide to control manual solar shades

  7. Performance of Nellore males under different artificial shading levels in the feedlot

    Directory of Open Access Journals (Sweden)

    Diogo Alves da Costa Ferro

    2016-09-01

    Full Text Available The objective of this study was to evaluate the influence of artificial shading on weight gain and meat quality of male Nellore cattle in an intensive production system. The experiment was conducted in the experimental feedlot of the Course of Animal Science at Universidade Estadual de Goiás, from July to October 2014. Forty-eight male Nellore cattle with an average initial weight of 310 kg were kept in double 24-m2 stalls, in a total of 24 stalls. Of these, six were in the open air; six were covered with black shade netting of 30% light interception; six with black shade netting 50%; and six with black shade netting 80%, providing 6 m2 of shade per stall. The ration supplied to the animals and the orts left in the trough were weighed daily to determine intake, and the temperature-humidity index (THI was measured twice weekly. Animals were weighed for the first time at the start of the experiment, and then another three times until the end, which was followed by the slaughter and assessments of performance and meat quality. A difference (p 0.05 was observed for feed intake, initial weight, final weight, total weight gain, average daily weight gain, carcass yield, marbling, texture, fatness, backfat thickness, loin-eye area, color, thigh length and circumference, leg length and circumference, or carcass length between the animals on the different treatments. The use of artificial shading does not have a significant effect on performance or meat quality of feedlot Nellore cattle when the ambient temperature is within the thermal comfort zone.

  8. Experimental investigation of effects of partial shading and faults on photovoltaic modules performances

    Directory of Open Access Journals (Sweden)

    Amor FEZZANI

    2017-12-01

    Full Text Available Temperature, solar insolation, shading and faults affect the performance of the photovoltaic array. Often, the PV arrays get shadowed, completely or partially, by the passing clouds neigh boring buildings, towers or by trees, and other utilities. The situation is of a interest in a case of the large PV power plants. In the case of the shading the characteristics of the PV module are more complex with the several peak values. Under such conditions, it is very difficult to determine the maximum power point (MPP. MATLAB-programmed modelling and simulation of photovoltaic module is presented here, by focusing on the effects of partial shading on the output of the photovoltaic (PV module and Faults Bypass Diode. The proposed models facilitate simulating the dynamic performances of PV-based power systems and have been validated by means of simulation study. The southern part of Algeria, where the experimental system is mounted, is particularly well appropriate to photovoltaic systems. To evaluate the effectiveness of the proposed model, experiments have been conducted to compare the experimental and simulated current-voltage (I-V and power-voltage (P-V curves of a PV system under some predefined partial shading and faults bypass diode, using different PV technologies such as mono-crystalline and multi-crystalline.

  9. Performance Evaluation of Tree Object Matching

    DEFF Research Database (Denmark)

    Somchaipeng, Kerawit; Sporring, Jon; Kreiborg, Sven

    2005-01-01

    of the algorithm is presented: an exact and an approximation. Several experiments are conducted to empirically evaluate the MSST matching algorithm under image distortions. Further, the performance of the MSST matching algorithm is measured on three databases: the ORL face database, magazine covers, and the COIL......Multi-Scale Singularity Trees (MSSTs) represents the deep structure of images in scale-space and provide both the connections between image features at different scales and their strengths. In this report we present and evaluate an algorithm that exploits the MSSTs for image matching. Two versions...... database. Finally the performance is compared with algorithms based on the Scale Invariant Feature Transform (SIFT), and the Position of Catastrophes (CAT)....

  10. Effect of shade on body temperature and performance of feedlot steers.

    Science.gov (United States)

    Gaughan, J B; Bonner, S; Loxton, I; Mader, T L; Lisle, A; Lawrence, R

    2010-12-01

    A 120-d feedlot study using 164 Angus steers (BW = 396.7 ± 7.0 kg) was undertaken in Queensland Australia (24°84' S, 149°78' N) to determine the effect of shade on body temperature (T(B)) and performance. Cattle were allocated to 20 pens: 16 with an area of 144 m(2) (8 steers/pen) and 4 with an area of 168 m(2) (9 steers/pen). Treatments (10 pens/treatment) were unshaded (NS) vs. shaded (SH). Shade (3.3 m(2)/steer) was provided by 80% solar block shade cloth. Before the study (d -31), 63 steers were implanted (between the internal abdominal muscle and the peritoneum at the right side flank) with a T(B) transmitter. Within each pen, 3 steers had a T(B) transmitter. Individual T(B) was obtained every 30 min. The cattle were fed a feedlot diet and had ad libitum access to water. Water usage and DMI were recorded daily on a pen basis. Average daily gain and G:F were calculated on a pen basis. Climatic variables were obtained from an on-site weather station every 30 min. Individual panting scores (PS) were obtained daily at 0600, 1200, and 1600 h. From these, mean PS (MPS) were calculated for each pen. At slaughter (d 121), individual HCW, loin muscle area (LMA), rump fat depth (P8), 12th-rib fat depth, and marbling score were obtained. Mean T(B) was not affected (P > 0.05) by treatment (SH = 39.58°C; NS = 39.60°C). However, during a 21-d heat wave when cattle were exposed to a mean ambient temperature (T(AM)) > 30°C for 8 h each d (T(AM) between 0800 and 1800 h = 29.7°C, and 23.4°C between 1830 and 0730 h), the T(B) of SH steers (40.41 ± 0.10°C) was less (P 0.05) were found for LMA, P8, or marbling score. Access to shade improved (P < 0.05) ADG and G:F, increased HCW, and decreased MPS; however, shade did not completely eliminate the impact of high heat load.

  11. Performance of free-range chickens reared in production modules enriched with shade net and perches

    Directory of Open Access Journals (Sweden)

    MJB Santos

    2014-03-01

    Full Text Available An experiment was carried out to evaluate the effect of environmental enrichment in a free-range chicken production system on live performance as a function of microclimate, physiological parameters, and performance parameters. Four production modules were divided into four pens with 10 birds each, totaling 60 birds. The following treatments were applied: access to a paddock (TEST, access to a paddock with perches (PER, access to a paddock with artificial shade (SHA, and access to the paddock with perches and artificial shade (PESH. The PESH production module presented the best globe temperature (Tbg,ºC and enthalpy (h, kJ/kg, and thereby, the best thermal environmental conditions, which ensured the longest permanence time of the birds in the paddock. The SHA and PESH modules promoted the lowest respiratory rate and shank and comb temperatures. Live performance was influenced by the presence of environmental enrichment (modules SHA and PESH, with the highest live weight (LW and weight gain (WG and the lowest feed conversion ratio (FCR and metabolizable energy intake (MEI. Parts yield, such as giblets, were not influenced by production modules, except for PESH, which promoted higher offal weight. In general, chickens reared in enriched production modules presented greatest performance and comfort results and were considered close to optimal rearing conditions.

  12. Influence of personality on tooth shade selection.

    Science.gov (United States)

    Haralur, Satheesh B; Al-Shehri, Khalid Saleh; Assiri, Hassan Mohammed; Al-Qahtani, Mushabab AbdulRahman

    2016-01-01

    The harmonious shade matching of restorations with adjacent natural teeth is a prerequisite for a successful esthetic restoration. Color is a combined effect of the physical properties of an object, the light source, and the perception of the observer. The interpretation of color is influenced by both the physiological and psychological health of an individual. It is critical to understand the influence of an individual's psychological state on the shade selection procedure to achieve better shade matching and post-treatment patient counseling. The aim of this study was to evaluate the influence of personality on tooth shade selection capability. Two porcelain fused to metal (PFM) discs were fabricated. A reference shade was determined using a spectrophotometer (Vita Easyshade, Vita). The personalities of volunteers were identified using a Myers- Briggs Type Indicator (MBTI) questionnaire. The volunteers visually identified the shade of the two PFM discs under a controlled light source. The mean color difference was determined between the visual and the spectrophotometer values. The data thus obtained was statistically analyzed with Kruskal-Wallis and post-hoc comparison tests to ascertain the difference between the groups. The groups that performed better in tooth shade selection were ENTJ (2.923 ± 2.36), ISTJ (3.086 ± 2.56), ENFJ (3.197 ± 2.936), and ESTJ (3.431± 2.78). The groups INTP (9.383 ± 3.30), ISTP (9.133 ± 3.44), ISFP (8.737 ± 2.81), and INTJ (8.480 ± 3.35) showed poor tooth shade selection ability. The Kruskal- Wallis test showed lower mean rank for group ENTJ (89.75), followed by ISTJ (92.25), and ENFJ (94.80). Within the limitations of this study, it was concluded that there was a statistically significant difference between the different personalities with regard to tooth shade selection ability.

  13. Design and Energy Performance of a Buoyancy Driven Exterior Shading Device for Building Application in Taiwan

    Directory of Open Access Journals (Sweden)

    Kuo-Tsang Huang

    2015-03-01

    Full Text Available Traditional dynamic shading systems are usually driven by electricity for continuously controlling the angle of blind slats to minimize the indoor solar heat gain over times. This paper proposed a novel design of buoyancy driven dynamic shading system, using only minimum amount of electricity. The energy performance and the improved thermal comfort induced by the system were simulated by EnergyPlus for a typical office space under the context of Taiwanese climate. The design processes are composed of three parts: an alterable angle of blind slats that raises the energy performance to be suitable for every orientation, the buoyancy driven transmission mechanism, and a humanized controller that ensures its convenience. The environmental friendly design aspects and control mechanisms to fulfill demands for manufacturing, assembling, maintenance and recycling, etc., were also presented as readily for building application. Besides, the effectiveness of cooling energy saving and thermal comfort enhancing were compared against the cases without exterior blinds and with traditional fixed blinds installed. The results show that the cooling energy is drastically reduced over times and the blind system is effectively enhancing the indoor thermal comfort.

  14. Semantic Data Matching: Principles and Performance

    Science.gov (United States)

    Deaton, Russell; Doan, Thao; Schweiger, Tom

    Automated and real-time management of customer relationships requires robust and intelligent data matching across widespread and diverse data sources. Simple string matching algorithms, such as dynamic programming, can handle typographical errors in the data, but are less able to match records that require contextual and experiential knowledge. Latent Semantic Indexing (LSI) (Berry et al. ; Deerwester et al. is a machine intelligence technique that can match data based upon higher order structure, and is able to handle difficult problems, such as words that have different meanings but the same spelling, are synonymous, or have multiple meanings. Essentially, the technique matches records based upon context, or mathematically quantifying when terms occur in the same record.

  15. Experimental and Simulation for the Effect of Partial Shading on Solar Panel Performance

    Directory of Open Access Journals (Sweden)

    Emad Talib Hahsim

    2016-06-01

    Full Text Available Partial shading is one of the problems that affects the power production and the efficiency of photovoltaic module. A series of experimental work have been done of partial shading of monocrystalline PV module; 50W, Isc: 3.1A, Voc: 22V with 36 cells in series is achieved. Non-linear power output responses of the module are observed by applying various cases of partial shading (vertical and horizontal shading of solar cells in the module. Shading a single cell (corner cell has the greatest impact on output energy. Horizontal shading or vertical shading reduced the power from 41W to 18W at constant solar radiation 1000W/m2 and steady state condition. Vertical blocking a column of cells (9 cells in a module reduces the power from 41W to 18W (53% power reduction; while, blocking one or two cell in the row reduces the power from 41 W to 18W (53% power reduction. Shading three or four cells in the same row reduces the power from 41W to 1W or 0.006W (94% power reduction. A complete Matlab / Simulink model are achieved to simulate the effect of partial shading on power output of module. It is found that shading a single cell reduces the power from 50 W to 25 W (50% using Matlab/Simulink model. Comparisons have been made between the I-V and P-V characteristic curves from the simulation with the practical (experimental curves. The results showed that the percentage of error between the Simulink results and the corresponding experimental measurement are 22% without shading effect and, 32% with partial shading.

  16. Reliability of conventional shade guides in teeth color determination

    Directory of Open Access Journals (Sweden)

    Todorović Ana

    2013-01-01

    Full Text Available Background/Aim. Color matching in prosthodontic therapy is a very important task because it influences the esthetic value of dental restorations. Visual shade matching represents the most frequently applied method in clinical practice. Instrumental measurements provide objective and quantified data in color assessment of natural teeth and restorations. In instrumental shade analysis, the goal is to achieve the smallest ΔE value possible, indicating the most accurate shade match. The aim of this study was to evaluate the reliability of commercially available ceramic shade guides. Methods. VITA Easyshade spectrophotometer (VITA, Germany was used for instrumental color determination. Utilizing this device, color samples of ten VITA Classical and ten VITA 3D - Master shade guides were analyzed. Each color sample from all shade guides was measured three times and the basic parameters of color quality were examined: ΔL, ΔC, ΔH, ΔE, ΔElc. Based on these parameters spectrophotometer marks the shade matching as good, fair or adjust. Results. After performing 1,248 measurements of ceramic color samples, frequency of evaluations adjust, fair and good were statistically significantly different between VITA Classical and VITA 3D Master shade guides (p = 0.002. There were 27.1% cases scored as adjust, 66.3% as fair and 6.7% as good. In VITA 3D - Master shade guides 30.9% cases were evaluated as adjust, 66.4% as fair and 2.7% cases as good. Conclusion. Color samples from different shade guides, produced by the same manufacturer, show variability in basic color parameters, which once again proves the lack of precision and nonuniformity of the conventional method.

  17. Automatic shading effects on the energetic performance of building systems; Efeito do sombreamento automatico no desempenho de sistemas prediais

    Energy Technology Data Exchange (ETDEWEB)

    Prado, Racine Tadeu Araujo

    1996-12-31

    This thesis develops a theoretic-experimental study dealing with the effects of an automatic shading device on the energetic performance of a dimmable lighting system and a cooling equipment. Some equations related to fenestration optical and thermal properties are rebuilt, while some others are created, under a theoretical approach. In order to collect field data, the energy demand-and other variables - was measured in two distinct stories, with the same fenestration features, of the Test Tower. New data was gathered after adding an automatic shading device to the window of one story. The comparison of the collected data allows the energetic performance evaluation of the shading device. (author) 136 refs., 55 figs., 6 tabs.

  18. Development and Performance Evaluation of a Rain Shade for a low ...

    African Journals Online (AJOL)

    Aderoju Tomiwa

    for a low scale agricultural produce, The rain shade consists of a geared D. C motor, 12V battery, ... rain shade was embarked on in this research work. ... (9) Face width, b. +. 5mm (10). Determination of weight acting on the Extension. Arm: The measured weight of the polyester fabric equals 14.7N, while the combined ...

  19. Effects of shade and feeding zilpaterol hydrochloride to finishing steers on performance, carcass quality, mobility, and body temperature

    Science.gov (United States)

    Crossbred steers (n=480) were utilized to study the effects of shade and feeding zilpaterol hydrochloride (ZH) on performance, carcass quality, mobility, and body temperature (BT). A randomized block design with a 2×2 factorial arrangement of treatments was conducted with four replicates per treatme...

  20. Effects of shade and feeding zilpaterol hydrochloride to finishing steers on performance, carcass quality, heat stress, mobility, and body temperature

    Science.gov (United States)

    Steers (n = 480) were used to study the effects of shade and feeding zilpaterol hydrochloride (ZH) on performance, carcass quality, heat stress, mobility, and body temperature (BT). A randomized block design with a 2 × 2 factorial arrangement of treatments was used with 4 replicates per treatment. F...

  1. Shading and litter mediate the effects of soil fertility on the performance of an understorey herb.

    Science.gov (United States)

    Copeland, Stella M; Harrison, Susan P

    2016-11-01

    Soil fertility and topographic microclimate are common determinants of plant species distributions. However, biotic conditions also vary along these abiotic gradients, and may mediate their effects on plants. In this study, we investigated whether soils and topographic microclimate acted directly on the performance of a focal understorey plant, or indirectly via changing biotic conditions. We examined direct and indirect relationships between abiotic variables (soil fertility and topographic microclimate) and biotic factors (overstorey and understorey cover, litter depth and mycorrhizal colonization) and the occurrence, density and flowering of a common understorey herb, Trientalis latifolia, in the Klamath-Siskiyou Mountains, Oregon, USA. We found that the positive effects of soil fertility on Trientalis occurrence were mediated by greater overstorey shading and deeper litter. However, we did not find any effects of topographic microclimate on Trientalis distribution that were mediated by the biotic variables we measured. The predictive success of Trientalis species distribution models with soils and topographic microclimate increased by 12 % with the addition of the biotic variables. Our results reinforce the idea that species distributions are the outcome of interrelated abiotic gradients and biotic interactions, and suggest that biotic conditions, such as overstorey density, should be included in species distribution models if data are available. © The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  2. Sleep patterns and match performance in elite Australian basketball athletes.

    Science.gov (United States)

    Staunton, Craig; Gordon, Brett; Custovic, Edhem; Stanger, Jonathan; Kingsley, Michael

    2017-08-01

    To assess sleep patterns and associations between sleep and match performance in elite Australian female basketball players. Prospective cohort study. Seventeen elite female basketball players were monitored across two consecutive in-season competitions (30 weeks). Total sleep time and sleep efficiency were determined using triaxial accelerometers for Baseline, Pre-match, Match-day and Post-match timings. Match performance was determined using the basketball efficiency statistic (EFF). The effects of match schedule (Regular versus Double-Header; Home versus Away) and sleep on EFF were assessed. The Double-Header condition changed the pattern of sleep when compared with the Regular condition (F (3,48) =3.763, P=0.017), where total sleep time Post-match was 11% less for Double-Header (mean±SD; 7.2±1.4h) compared with Regular (8.0±1.3h; P=0.007). Total sleep time for Double-Header was greater Pre-match (8.2±1.7h) compared with Baseline (7.1±1.6h; P=0.022) and Match-day (7.3±1.5h; P=0.007). Small correlations existed between sleep metrics at Pre-match and EFF for pooled data (r=-0.39 to -0.22; P≥0.238). Relationships between total sleep time and EFF ranged from moderate negative to large positive correlations for individual players (r=-0.37 to 0.62) and reached significance for one player (r=0.60; P=0.025). Match schedule can affect the sleep patterns of elite female basketball players. A large degree of inter-individual variability existed in the relationship between sleep and match performance; nevertheless, sleep monitoring might assist in the optimisation of performance for some athletes. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  3. Individual match approach to Bowling performance measures in ...

    African Journals Online (AJOL)

    Match conditions can play a significant role in player performances in a cricket match. If the pitch is in a good condition, the batsmen can achieve good scores, making it difficult for the bowlers. In the case of an uneven pitch or adverse weather conditions, the bowlers may have the upper hand. In order to measure bowlers' ...

  4. Genotype x shade effects for western hemlock.

    Science.gov (United States)

    G.R. Johnson; C. Cartwright

    2005-01-01

    Western hemlock (Tsuga heterophylla (Raf.) Sarg.) families were grown under different levels of shade for 2 or 3 years at two nursery sites to determine whether families performed differently relative to one another in the different shade environments. Differences were found both for levels of shade and families, but no family x shade interaction...

  5. High Performance Embedded System for Real-Time Pattern Matching

    CERN Document Server

    Sotiropoulou, Calliope Louisa; The ATLAS collaboration; Gkaitatzis, Stamatios; Citraro, Saverio; Giannetti, Paola; Dell'Orso, Mauro

    2016-01-01

    In this paper we present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics (HEP) and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton-proton collisions in hadron collider experiments. A miniaturised version of this complex system is being developed for pattern matching in generic image processing applications. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain. The pattern matching can be executed by a custom designed Associative Memory (AM) chip. The reference patterns are chosen by a complex training algorithm implemented on an FPGA device. Post processing algorithms (e.g. pixel clustering...

  6. High Performance Embedded System for Real-Time Pattern Matching

    CERN Document Server

    Sotiropoulou, Calliope Louisa; The ATLAS collaboration; Gkaitatzis, Stamatios; Citraro, Saverio; Giannetti, Paola; Dell'Orso, Mauro

    2016-01-01

    We present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics (HEP) and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton-proton collisions in hadron collider experiments. A miniaturized version of this complex system is being developed for pattern matching in generic image processing applications. The design uses the flexibility of Field Programmable Gate Arrays (FPGAs) and the powerful Associative Memory Chip (ASIC) to achieve real-time performance. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain.

  7. High performance embedded system for real-time pattern matching

    Energy Technology Data Exchange (ETDEWEB)

    Sotiropoulou, C.-L., E-mail: c.sotiropoulou@cern.ch [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Luciano, P. [University of Cassino and Southern Lazio, Gaetano di Biasio 43, Cassino 03043 (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Gkaitatzis, S. [Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Citraro, S. [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Giannetti, P. [INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Dell' Orso, M. [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy)

    2017-02-11

    In this paper we present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton–proton collisions in hadron collider experiments. A miniaturized version of this complex system is being developed for pattern matching in generic image processing applications. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain. The pattern matching can be executed by a custom designed Associative Memory chip. The reference patterns are chosen by a complex training algorithm implemented on an FPGA device. Post processing algorithms (e.g. pixel clustering) are also implemented on the FPGA. The pattern matching can be executed on a 2D or 3D space, on black and white or grayscale images, depending on the application and thus increasing exponentially the processing requirements of the system. We present the firmware implementation of the training and pattern matching algorithm, performance and results on a latest generation Xilinx Kintex Ultrascale FPGA device. - Highlights: • A high performance embedded system for real-time pattern matching is proposed. • It is based on a system developed for High Energy Physics experiment triggers. • It mimics the operation of the human brain (cognitive image processing). • The process can be executed on 2D and 3D, black and white or grayscale images. • The implementation uses FPGAs and custom designed associative memory (AM) chips.

  8. Shade avoidance.

    Science.gov (United States)

    Casal, Jorge J

    2012-01-01

    The presence of neighboring vegetation modifies the light environment experienced by plants, generating signals that are perceived by phytochromes and cryptochromes. These signals cause large changes in plant body form and function, including enhanced growth of the hypocotyl and petioles, a more erect position of the leaves and early flowering in Arabidopsis thaliana. Collectively, these so-called shade-avoidance responses tend to reduce the degree of current or future shade by neighbors. Shade light signals increase the abundance of PHYTOCHROME INTERACTING FACTOR 4 (PIF4) and PIF5 proteins, promote the synthesis and redirection of auxin, favor the degradation of DELLA proteins and increase the expression of auxin, gibberellins and brassinosteroid-promoted genes, among other events downstream the photoreceptors. Selectively disrupting these events by genetic or pharmacological approaches affects shade-avoidance responses with an intensity that depends on the developmental context and the environment. Shade-avoidance responses provide a model to investigate the signaling networks used by plants to take advantage of the cues provided by the environment to adjust to the challenges imposed by the environment itself.

  9. Effects of shade and feeding zilpaterol hydrochloride to finishing steers on performance, carcass quality, heat stress, mobility, and body temperature.

    Science.gov (United States)

    Boyd, B M; Shackelford, S D; Hales, K E; Brown-Brandl, T M; Bremer, M L; Spangler, M L; Wheeler, T L; King, D A; Erickson, G E

    2015-12-01

    Steers ( = 480; 22% with black hides and 78% with red hides) were used to study the effects of shade and feeding zilpaterol hydrochloride (ZH) on performance, carcass quality, heat stress, mobility, and body temperature (BT). A randomized block design with a 2 × 2 factorial treatment arrangement was used with 4 replicates per treatment. Factors included housing type (open or shaded pens) and the feeding of ZH (0 or 8.33 mg/kg DM) the last 21 d on feed with a 3-d withdrawal. Cattle were blocked by BW into a heavy or light block and randomly assigned to pen within each block. Rumen boluses to record BT were inserted before ZH feeding. Respiration rate and panting scores were recorded daily during the ZH feeding period. Mobility scores were collected at various time points from before ZH feeding through harvest. Interactions between ZH and housing type were not significant ( > 0.26) for animal performance, carcass characteristics, and respiration or panting score. No differences ( > 0.44) were observed for DMI, ADG, or G:F on a live basis due to ZH; however, cattle fed in open pens tended ( = 0.08) to have a greater ADG than cattle in shaded pens. Cattle fed ZH had 14 kg heavier carcasses with larger LM area ( mobility scores, with observations on the morning of harvest at the abattoir being the worst for all groups of cattle. An interaction ( mobility, suggesting that animal welfare was not affected by feeding ZH for 21 d at the end of the feeding period.

  10. A string matching based algorithm for performance evaluation of ...

    Indian Academy of Sciences (India)

    In this paper, we have addressed the problem of automated performance evaluation of Mathematical Expression (ME) recognition. Automated evaluation requires that recognition output and ground truth in some editable format like LaTeX, MathML, etc. have to be matched. But standard forms can have extraneous symbols ...

  11. Evaluation of goal kicking performance in international rugby union matches.

    Science.gov (United States)

    Quarrie, Kenneth L; Hopkins, Will G

    2015-03-01

    Goal kicking is an important element in rugby but has been the subject of minimal research. To develop and apply a method to describe the on-field pattern of goal-kicking and rank the goal kicking performance of players in international rugby union matches. Longitudinal observational study. A generalized linear mixed model was used to analyze goal-kicking performance in a sample of 582 international rugby matches played from 2002 to 2011. The model adjusted for kick distance, kick angle, a rating of the importance of each kick, and venue-related conditions. Overall, 72% of the 6769 kick attempts were successful. Forty-five percent of points scored during the matches resulted from goal kicks, and in 5.7% of the matches the result of the match hinged on the outcome of a kick attempt. There was an extremely large decrease in success with increasing distance (odds ratio for two SD distance 0.06, 90% confidence interval 0.05-0.07) and a small decrease with increasingly acute angle away from the mid-line of the goal posts (odds ratio for 2 SD angle, 0.44, 0.39-0.49). Differences between players were typically small (odds ratio for 2 between-player SD 0.53, 0.45-0.65). The generalized linear mixed model with its random-effect solutions provides a tool for ranking the performance of goal kickers in rugby. This modelling approach could be applied to other performance indicators in rugby and in other sports in which discrete outcomes are measured repeatedly on players or teams. Copyright © 2015. Published by Elsevier Ltd.

  12. Positional Match Running Performance in Elite Gaelic Football.

    Science.gov (United States)

    Malone, Shane; Solan, Barry; Collins, Kieran D; Doran, Dominic A

    2016-08-01

    Malone, S, Solan, B, Collins, KD, and Doran, DA. Positional match running performance in elite Gaelic football. J Strength Cond Res 30(8): 2292-2298, 2016-There is currently limited information available on match running performance in Gaelic football. The objective of the current study was to report on the match running profile of elite male Gaelic football and assess positional running performance. In this observational study, 50 elite male Gaelic football players wore 4-Hz global positioning systems units (VX Sports) across 30 competitive games with a total of 215 full game data sets collected. Activity was classed according to total distance, high-speed distance (≥17 km·h), sprint distance (≥22 km·h), mean velocity (km·h), peak velocity (km·h), and number of accelerations. The average match distance was 8,160 ± 1,482 m, reflective of a relative distance of 116 ± 21 m·min, with 1,731 ± 659 m covered at high speed, which is reflective of a relative high-speed distance of 25 ± 9 m·min. The observed sprint distance was 445 ± 169 m distributed across 44 sprint actions. The peak velocity was 30.3 ± 1.8 km·h with a mean velocity of 6.5 ± 1.2 km·h. Players completed 184 ± 40 accelerations, which represent 2.6 ± 0.5 accelerations per minute. There were significant differences between positional groups for both total running distance, high-speed running distance, and sprint distance, with midfielders covering more total and high-speed running distance, compared with other positions (p football match play.

  13. Repeatability and interdevice reliability of two portable color selection devices in matching and measuring tooth color.

    Science.gov (United States)

    Lagouvardos, Panagiotis E; Fougia, Aggeliki G; Diamantopoulou, Sofia A; Polyzois, Gregory L

    2009-01-01

    There is a need to know how shade selection devices perform in matching and measuring tooth color, since these functions are usually evaluated independently and may present significant discrepancies. The purpose of this study was to evaluate 2 devices which offer both functions to test the null hypothesis that they present no differences in their repeatability and interdevice reliability relating to the 2 functions. Thirty-one extracted anterior human teeth were measured twice, with each of the devices (ShadeEye NCC and VITA EasyShade), by one investigator experienced and calibrated with both devices. L*a*b* values and shade matches to VITA Classical and Vitapan 3D-Master shade guide systems were determined for all teeth. Paired t tests and intraclass correlation coefficients (ICCs) were used to statistically analyze the data (alpha=.05). The results showed that L*a*b* values with VITA EasyShade were significantly higher than those with ShadeEye NCC (PL*a*b* parameters, while interdevice matching reliability ranged from 0.189 to 0.430, with no significant differences between shade systems (P>.05). All tooth color parameters were higher with the VITA EasyShade device. Measuring repeatability of the VITA EasyShade was higher than the ShadeEye NCC only for the L* parameter. Matching repeatability of the ShadeEye NCC was higher than the VITA EasyShade for the VITA Classical system. Interdevice measuring reliabilities were not different for the color parameters, but matching reliability of the VITA Classical system was higher than that of the Vitapan 3D-Master.

  14. Shade determination using camouflaged visual shade guides and an electronic spectrophotometer.

    Science.gov (United States)

    Kvalheim, S F; Øilo, M

    2014-03-01

    The aim of the present study was to compare a camouflaged visual shade guide to a spectrophotometer designed for restorative dentistry. Two operators performed analyses of 66 subjects. One central upper incisor was measured four times by each operator; twice with a camouflaged visual shade guide and twice with a spectrophotometer Both methods had acceptable repeatability rates, but the electronic shade determination showed higher repeatability. In general, the electronically determined shades were darker than the visually determined shades. The use of a camouflaged visual shade guide seems to be an adequate method to reduce operator bias.

  15. Matlab-Based Modeling and Simulations to Study the Performance of Different MPPT Techniques Used for Photovoltaic Systems under Partially Shaded Conditions

    Directory of Open Access Journals (Sweden)

    Jehun Hahm

    2015-01-01

    Full Text Available A pulse-width-modulator- (PWM- based sliding mode controller is developed to study the effects of partial shade, temperature, and insolation on the performance of maximum power point tracking (MPPT used in photovoltaic (PV systems. Under partially shaded conditions and temperature, PV array characteristics become more complex, with multiple power-voltage maxima. MPPT is an automatic control technique to adjust power interfaces and deliver power for a diverse range of insolation values, temperatures, and partially shaded modules. The PV system is tested using two conventional algorithms: the Perturb and Observe (P&O algorithm and the Incremental Conductance (IncCond algorithm, which are simple to implement for a PV array. The proposed method applied a model to simulate the performance of the PV system for solar energy usage, which is compared to the conventional methods under nonuniform insolation improving the PV system utilization efficiency and allowing optimization of the system performance. The PWM-based sliding mode controller successfully overcomes the issues presented by nonuniform conditions and tracks the global MPP. In this paper, the PV system consists of a solar module under shade connected to a boost converter that is controlled by three different algorithms and is generated using Matlab/Simulink.

  16. Modified mathematical model for evaluating the performance of water-in-glass evacuated tube solar collector considering tube shading effect

    International Nuclear Information System (INIS)

    Kabeel, A.E.; Khalil, A.; Elsayed, S.S.; Alatyar, A.M.

    2015-01-01

    The aim of this paper is to introduce a procedure for simulating the absorbed solar radiation and heat transfer process in water-in-glass evacuated tube solar collectors. The procedure is developed to calculate the daily utilized solar energy and outlet collector temperature for different tilt angles, collector azimuth angles and geometric parameters without requirement for any experimental factor determination. Total absorbed solar radiation is evaluated by integrating the flat-plate solar collector performance equations over the tube circumference taking into account the shading of the adjacent tubes and variance of transmissivity–absorptivity product with the incidence angle of radiation. The heat transfer into the collector fluid is evaluated by subtracting the heat loss from the total absorbed solar radiation. Comparison between calculated and measured tank temperature shows a good agreement between them under different heating loads. Performance of solar collector at different tilt angles, collector Azimuth angles, tubes spacing and collector mass flow rate is investigated theoretically. In Egypt (30° Latitude angle), the results show that 10°, 30° and 45° are the optimum solar collector tilt angles during the summer, vernal and autumnal equinox and winter operation respectively. Also, the utilized solar energy increases about 2.8% when the mass flow rate increases 100%, and the solar collector with south-facing has the best performance except for vertical tube solar collector. The simulation results also show that solar collector with wide tube spacing reduce the shading effect and hence increase the absorbed radiation. The final tank temperature as a function of collector's mass flow rate for three different days; 21 March, 21 June and 21 December is also investigated. The total incidence radiation, absorbed solar radiation and utilized heat per tube are presented for the three optimum tilt angles 10°, 30° and 45°. Efficiency curve of water

  17. Association Between Match Activity Variables, Measures of Fatigue and Neuromuscular Performance Capacity Following Elite Competitive Soccer Matches

    Directory of Open Access Journals (Sweden)

    Varley Ian

    2017-12-01

    Full Text Available The aim of the study was to assess the relationships between match activity variables, subsequent fatigue and neuromuscular performance capacity in elite soccer players. Subjects (n = 10 were professional soccer players participating in the English Championships. Match activity variables and markers of fatigue status were measured before and following two matches. Creatine kinase (CK and muscle soreness were measured at baseline, immediately following, as well as 40 and 64 h post-match. Countermovement jump performance and perceived ratings of wellness were measured at baseline, then 40 and 64 h post-match. Relationships were shown between CK and the total number of accelerations and decelerations immediately (r = 0.63; large, 40 h (r = 0.45; moderate and 64 h post-match (r = 0.35; moderate (p < 0.05. Relationships between CK and total sprint distance (r = 0.39; moderate and the number of sprints (r = 0.35; moderate 40 h post-match (p < 0.05 were observed. Furthermore, relationships were shown between the perceived rating of wellness and number of accelerations 40 (r = 0.52; large and 64 h (r = 0.40; moderate post-match, sprint distance 40 h post-match (r = 0.40; moderate and the total number of sprints 40 h post-match (r = 0.51; large (p < 0.05. The quantification of match activity variables, particularly the total number of accelerations and decelerations and the number of sprints, provides insights into the fatigue status in elite soccer players 40 and 64 h post-match.

  18. Matching performance of vehicle icons in graphical and textual formats.

    Science.gov (United States)

    Chi, Chia-Fen; Dewi, Ratna Sari

    2014-07-01

    The current research classified 82 vehicle icons into seven categories (image-related, concept-related, semi-abstract, arbitrary, abbreviation, word, and combined) for their matching accuracy, matching sequence, and matching time. These data can be compared and used as a framework for future icon development. Forty participants, all with a university degree, took part in this experiment. Half of the participants had intensive driving experience, while the other half never driven a car. The results indicated that on average, word icons had a significantly greater matching accuracy than the other icon formats; ranging from 4.7 to 20.8% difference. Regarding the matching sequence, participants matched image-related icons before other icon formats. Arbitrary and combined icons took significantly longer to match than other icon formats by 1.4-6.2 s. Based on the high matching accuracy (86.3%) and high ratings on subjective design features, word format can be used for functions describable using simple English for users with English reading ability. Confusion matrices showed that 63.2% of the misunderstandings were caused by similarity in format or function. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  19. Effects of Sensor Errors on the Performance of Map Matching

    Science.gov (United States)

    Chen, Wu; Li, Zhilin; Yu, Meng; Chen, Yongqi

    2005-05-01

    Map matching has been widely applied in car navigation systems as an efficient method to display the location of vehicles on maps. Various map-matching algorithms have been proposed. Inevitably, the correctness of the map matching is closely related to the accuracy of positioning sensors, such as GPS or Dead Reckoning (DR), and the complexity of the road network and map, especially in urban areas where the GPS signal may be constantly blocked by buildings and the road network is complicated. The existing map matching algorithms cannot resolve the positioning problems under all circumstances. They sometimes give the wrong position estimates of the car on road; the result is called mismatching. In order to improve the quality of map matching, a deep understand of the accuracy of sensor errors on mismatching is important. This paper analyses various factors that may affect the quality of map matching based on extensive tests in Hong Kong. Suggestions to improve the success rate of map matching are also provided.

  20. Hippocampal lesions impair performance on a conditional delayed matching and non-matching to position task in the rat.

    Science.gov (United States)

    Sloan, Hazel L; Döbrössy, Màtè; Dunnett, Stephen B

    2006-08-10

    The hippocampus is thought to be involved in a range of cognitive processes, from the ability to acquire new memories, to the ability to learn about spatial relationships. Humans and monkeys with damage to the hippocampus are typically impaired on delayed matching to sample tasks, of which the operant delayed matching to position task (DMTP) is a rat analogue. The reported effects of hippocampal damage on DMTP vary, ranging from delay-dependent deficits to no deficit whatsoever. The present study investigates a novel memory task; the conditional delayed matching/non-matching to position task (CDM/NMTP) in the Skinner box. CDM/NMTP uses the presence of specific stimulus cues to signify whether a particular trial is matching or non-matching in nature. Thus, it incorporates both the task contingencies within one session, and supplements the requirement for remembering the side of the lever in the sample phase with attending to the stimulus and remembering the conditional discrimination for the rule. Rats were trained preoperatively and the effects of bilateral excitotoxic lesions of the hippocampus were examined on postoperative retention of the task. Rats with lesions of the hippocampus incurred a significant impairment on the task that was manifest at all delays intervals. Despite a bias towards matching during training, trials of either type were performed with equivalent accuracy and neither rule was affected differentially by the lesion. This task may prove useful in determining the cognitive roles of a range of brain areas.

  1. Shade variance in ceramic restoration and shade tab: An in vitro study

    Directory of Open Access Journals (Sweden)

    Pannaikadu Somasundaram Prabu

    2012-01-01

    Full Text Available Background: In clinical practice aesthetics for any restoration needs to consider the parameters of surface form, translucency and colour.To achieve ideal aesthetics the colour replication process for dental porcelain is the most important step which comprises of a shade selection phase followed by shade duplication. Materials and Methods: The ceramic brands Vita VMK95 (classic and Ivoclar classic V were used for comparison with Vita classic shade tab guide shades A2 and B2. The samples were made of specific shape, size, and were of the recommended dimensions from investing self-cure acrylic strips to casted NiCr specimens Objective. The objective of this study was to quantify the results in CIE AE units system for the colour differences between the Vita shade guide colours and two commercial porcelains for metal ceramic crowns. Results: The results indicated that the porcelains do not match the shade guides to which they are compared and shade variations exist between different lots of porcelain from the same and different manufacturer. Conclusion: Problems identified that porcelains do not match the shade guides to which they are compared and shade variations exist between different lots of porcelain from the same and different manufacturer

  2. Affective match: Leader emotions, follower positive affect, and follower performance

    NARCIS (Netherlands)

    Damen, F.; van Knippenberg, B.M.; van Knippenberg, D.

    2008-01-01

    Leader emotions may play an important role in leadership effectiveness. Extending earlier research on leader emotional displays and leadership effectiveness, we propose that the affective match between follower positive affect (PA) and leaders' emotional displays moderates the effectiveness of

  3. Attack and serve performances according to the match period and quality of opposition in elite volleyball matches.

    Science.gov (United States)

    Marcelino, Rui O; Sampaio, Jaime E; Mesquita, Isabel M

    2012-12-01

    The purpose of this study was to examine attack and serve performances in the beginning and end of the initial and final sets of volleyball matches according to the quality of opposition. Six hundred rallies from the Men's World Cup 2007 were selectively sampled from a total of 5,117 rallies observed using video match analysis. Rally-by-rally double moving averages of serve and attack efficacy were plotted by 4 different match periods (first 15 rallies of the initial set; first 15 rallies of the final set; last 15 rallies of the initial set; and last 15 rallies of the final set). Approximate entropy values were calculated to analyze the amount of data randomness. The results were examined according to the quality of opposition in 2 types of games: higher level (HIGH) including the first 4 ranked teams and lower level (LOW) composed of the last 5 ranked teams. The results suggested that volleyball matches presented different profiles depending on the match period. Considering the teams' level, a greater adaptation was found within the HIGH × HIGH matches according to the match period and a more strategic use of the serve and attack tactics taking into account the type of the set (initial or final set) and the period (beginning or end of the set). The findings emphasize the need for coaches and players to perceive the most important points at the end of the set and to manage their effort throughout the match attempting to reach this period in optimal condition. Therefore, it might be beneficial to coaches to stress the need to perform at the highest level, particularly at the end of the training drills that simulate competition scenarios.

  4. A string matching based algorithm for performance evaluation of ...

    Indian Academy of Sciences (India)

    matching that is not intuitive. For that, we have proposed a novel structure encoded string representation that is independent of any editable format. Structure encoded strings retain the structure (spatial relationships like superscript, subscript, etc.) and do not contain any extraneous symbols. As structure encoded strings ...

  5. A string matching based algorithm for performance evaluation of ...

    Indian Academy of Sciences (India)

    Levenshtein edit distance can be applied. This approach is intuitive as extraneous symbols are not involved in the matching process. The paper is organized as follows. .... For example, consider an ME: ai+1. 2 and its LATEX string given by: aˆ{i+1}_2. In LATEX,ˆ and _ designate superscript (northern subexpression) and ...

  6. Evaluation of accuracy of shade selection using two spectrophotometer systems: Vita Easyshade and Degudent Shadepilot.

    Science.gov (United States)

    Kalantari, Mohammad Hassan; Ghoraishian, Seyed Ahmad; Mohaghegh, Mina

    2017-01-01

    The aim of this in vitro study was to evaluate the accuracy of shade matching using two spectrophotometric devices. Thirteen patients who require a full coverage restoration for one of their maxillary central incisors were selected while the adjacent central incisor was intact. 3 same frameworks were constructed for each tooth using computer-aided design and computer-aided manufacturing technology. Shade matching was performed using Vita Easyshade spectrophotometer, Shadepilot spectrophotometer, and Vitapan classical shade guide for the first, second, and third crown subsequently. After application, firing, and glazing of the porcelain, the color was evaluated and scored by five inspectors. Both spectrophotometric systems showed significantly better results than visual method ( P spectrophotometers ( P Spectrophotometers are a good substitute for visual color selection methods.

  7. A Technique Using Calibrated Photography and Photoshop for Accurate Shade Analysis and Communication.

    Science.gov (United States)

    McLaren, Edward A; Figueira, Johan; Goldstein, Ronald E

    2017-02-01

    This article reviews the critical aspects of controlling the shade-taking environment and discusses various modalities introduced throughout the years to acquire and communicate shade information. Demonstrating a highly calibrated digital photographic technique for capturing shade information, this article shows how to use Photoshop® to standardize images and extract color information from the tooth and shade tab for use by a ceramist for an accurate shade-matching restoration.

  8. Winter wheat and summer shade

    Science.gov (United States)

    Artru, S.; Garre, S.; Lassois, L.; Dupraz, C.

    2014-12-01

    Agroforestry research is in full expansion, but uncertainty remains on the performance of combinations of species with regard to the broad range of possible species associations. In addition, the variability of environmental conditions under which agroforestry stands can be successfully developed is unknown. Under Belgian pedoclimatic conditions, tree-crop competition for light might be the principal limiting factor in the agroforestry context. Most studies show that shade stress induces a systematic reduction of final crop yield. However, the response of a specific crop to shade is highly dependent on environmental conditions. In agroforestry systems, the tree canopy reduces the incident radiation for the crop following a dynamic spatio-temporal pattern. In this study, we will report on the efficiency of wheat under artificial dynamic shade in the experimental farm of Gembloux Agro-Bio Tech, Belgium in order to evaluate it's potential for agroforestry purposes in the same region. Wheat productivity and development under artificial shade conditions have been monitored during 1 year and the observations will be continued for 2 more years. We constructed an artificial shade structure, which mimics the light environment observed under hybrid walnut agroforestry trees: periodic fluctuation in radiation transmittance and discontinuous light quantity. We collected information on biomass development, soil state and radiation patterns in the field. Using this data, we evaluated the influence of dynamic shade, light availability and the efficiency with which energy is converted in wheat dry matter under the artificial shade treatment. This, in combination with modeling, will allow a thorough study of the potential of wheat-walnut agroforestry systems in the Hesbaye region in Belgium.

  9. Energy and Economic Performance of Plant-Shaded Building Façade in Hot Arid Climate

    Directory of Open Access Journals (Sweden)

    Mahmoud Haggag

    2017-11-01

    Full Text Available The use of vegetated walls and intensive plantation around buildings has increased in popularity in hot and arid climates, such as those in the United Arab Emirates (UAE. This is due to its contribution towards reducing the heat gain and increasing the occupants’ comfort levels in spaces. This paper examines the introduction of plant-shaded walls as passive technique to reduce heat gain in indoor spaces as a strategy to lower cooling demand in hot arid climate of Al-Ain city. Experimental work was carried out to analyze the impact of using plantation for solar control of residential building façades in extreme summer. External and internal wall surface and ambient temperatures were measured for plant-shaded and bare walls. The study concluded that shading effect of the intensive plantation can reduce peak time indoor air temperature by 12 °C and reduce the internal heat gain by 2 kWh daily in the tested space. The economic analysis reveals a payback period of 10 years considering local energy tariff excluding environmental savings.

  10. The effect of repeated firings on the color of an all-ceramic system with two different veneering porcelain shades.

    Science.gov (United States)

    Celik, Gozde; Uludag, Bulent; Usumez, Aslihan; Sahin, Volkan; Ozturk, Ozge; Goktug, Gurkan

    2008-03-01

    Color matching between a restoration and natural teeth is a common clinical problem. Despite careful shade selection, color of the restoration may be affected by fabrication procedures. The purpose of this study was to determine the color changes of an all-ceramic restoration with 2 different veneering porcelain shades after repeated firings. Twenty disc-shaped ceramic specimens, 4 mm in diameter with a 1-mm core thickness and 2 different veneering porcelain shades (A1, A3), were fabricated from a zirconia-based porcelain (DC-Zirkon) (n=10). Repeated firings (3, 5, 7, or 9 firings) were performed for the specimens, and color differences (DeltaE) were determined using a spectrophotometer. Repeated measures ANOVA was used to analyze the data (number of firings, veneering porcelain color). The Tukey HSD test and paired 2-tailed tests were performed for multiple comparisons (alpha=.05). The L*a*b* values of the ceramic system were affected by the number of firings (3, 5, 7, or 9) (Pveneering porcelain shade (Pveneering porcelain shade for L* (P=.003) and b* (P=.042) values, but not for the a* value (P=.82). An increase in the number of firings of the specimens with both A1 and A3 veneering porcelain shades produced an increase in the L* value, resulting in lighter specimens (Pveneering porcelain shades, the a* value decreased after repeated firings, which resulted in more green specimens (P=.002). The b* value did not change after repeated firings (P=.09) for the A1 veneering porcelain shade; however, it increased for the A3 veneering porcelain shade, which resulted in more yellow specimens (P=.001). The color of the all-ceramic specimens with different veneering porcelain shades is influenced by repeated firings. However, color changes that occurred are clinically acceptable.

  11. Solar shading control strategy for office buildings in cold climate

    DEFF Research Database (Denmark)

    Røseth Karlsen, Line; Heiselberg, Per Kvols; Bryn, Ida

    2016-01-01

    Highlights •Solar shading control strategy for office buildings in cold climate is developed. •Satisfying energy and indoor environmental performance is confirmed. •Importance of integrated evaluations when selecting shading strategy is illustrated.......Highlights •Solar shading control strategy for office buildings in cold climate is developed. •Satisfying energy and indoor environmental performance is confirmed. •Importance of integrated evaluations when selecting shading strategy is illustrated....

  12. METABOLIC DEMANDS OF MATCH PERFORMANCE IN YOUNG SOCCER PLAYERS

    Directory of Open Access Journals (Sweden)

    Alper Aslan

    2012-03-01

    Full Text Available The aim of the present study was to determine metabolic responses, movement patterns and distance covered at running speeds corresponding to fixed blood lactate concentrations (FBLs in young soccer players during a match play. A further aim of the study was to evaluate the relationships between FBLs, maximal oxygen consumption (VO2max and distance covered during a game. A multistage field test was administered to 32 players to determine FBLs and VO2max. Blood lactate (LA, heart rate (HR and rate of perceived exertion (RPE responses were obtained from 36 players during tournament matches filmed using six fixed cameras. Images were transferred to a computer, for calibration and synchronization. In all players, values for LA and HR were higher and RPE lower during the 1st half compared to the 2nd half of the matches (p < 0.01. Players in forward positions had higher LA levels than defenders, but HR and RPE values were similar between playing positions. Total distance and distance covered in jogging, low-moderate-high intensity running and low intensity sprint were higher during the 1st half (p < 0.01. In the 1st half, players also ran longer distances at FBLs [p<0.01; average running speed at 2mmol·L-1 (FBL2: 3.32 ± 0.31m·s-1 and average running speed at 4mmol·L-1 (FBL4: 3.91 ± 0.25m·s-1]. There was a significant difference between playing positions in distance covered at different running speeds (p < 0.05. However, when distance covered was expressed as FBLs, the players ran similar distances. In addition, relationships between FBLs and total distance covered were significant (r = 0.482 to 0.570; p < 0.01. In conclusion, these findings demonstrated that young soccer players experienced higher internal load during the 1st half of a game compared to the 2nd half. Furthermore, although movement patterns of players differed between playing positions, all players experienced a similar physiological stress throughout the game. Finally, total

  13. A string matching based algorithm for performance evaluation of ...

    Indian Academy of Sciences (India)

    In this paper, we have addressed the problem of automated performance evaluation of Mathematical Expression (ME) recognition. Automated evaluation requires that recognition ... Arun Agarwal1 Chakravarthy Bhagvati1. School of Computer and Information Sciences, University of Hyderabad, Hyderabad 500 046, India ...

  14. An in vitro study to evaluate the difference in shade between commercially available shade guides and glazed porcelain

    Directory of Open Access Journals (Sweden)

    P Manimaran

    2016-01-01

    Full Text Available Introduction: Smile is one of the most important interactive communication skills of a person. A smile is the key factor for an aesthetic appearance. Hence aesthetics is one of the motivating factor for the patients to seek dental care. Correction of unaesthetic appearance gives a positive effect to the self esteem of the patient. Aim: The aim of this study was to compare the difference in the shade between the commercially available shade guides namely Vita Classical And Ivoclar Chromascop and the fired porcelain samples fabricated using Vita Zahnfabrik VMK 95 and Ivoclar Classic Materials respectively. Objectives: The objective of this study was to obtain a matching brand of material that has a particular shade tab among the brands used. Conclusion: To conclude, Ivoclar material matched the chromascop shade guide better than the vita material matched the vita classic shade guide.

  15. Nuclear Forces and High-Performance Computing: The Perfect Match

    Energy Technology Data Exchange (ETDEWEB)

    Luu, T; Walker-Loud, A

    2009-06-12

    High-performance computing is now enabling the calculation of certain nuclear interaction parameters directly from Quantum Chromodynamics, the quantum field theory that governs the behavior of quarks and gluons and is ultimately responsible for the nuclear strong force. We briefly describe the state of the field and describe how progress in this field will impact the greater nuclear physics community. We give estimates of computational requirements needed to obtain certain milestones and describe the scientific and computational challenges of this field.

  16. EEG and autonomic responses during performance of matching and non-matching to sample working memory tasks with emotional content.

    Directory of Open Access Journals (Sweden)

    Ana eGarcia

    2011-12-01

    Full Text Available Working memory (WM is a neural system responsible for the temporary storage of information and its utilization in problem solving. The central executive is theorized as the controller of storage functions that support WM. Neurophysiological data suggest that EEG theta and alpha oscillations in frontal and midline regions are involved in neural communication between the central executive and storage functions during WM performance. Emotion is known to modulate several memory systems, including WM, through central and peripheral pathways. However, the physiological correlations (electroencephalographic – EEG; autonomic nervous activity of the effect of emotion over WM are not well described. In this study we aimed to identify physiological responses related to emotional WM performance. EEG (21 channels, heart rate (HR and galvanic skin response (GSR recordings were obtained from 54 volunteers while performing delayed matching and non-matching to sample tasks (DMTS/DNMTS. Emotional and neutral pictures from the International Affective Picture System and geometric figures were used as stimuli. As expected, WM performance was accompanied by presence of theta (frontal and midline electrodes and Alpha power (parietal electrodes. Beta and gamma oscillations were concentrated in frontopolar and left temporal regions. DNMTS task was accompanied by increases in Beta power, HR and GSR compared to DMTS task. Correlation analysis showed a positive tendency for gamma in Fp2 site, ratio of LF/HF (HR low and high frequency and skin conductance in both tasks. The HR results indicate an inverse reaction related to parasympathetic and sympathetic nervous system during the performance of the tasks. Taken together, our results contribute to elucidate the complex interactions between central and autonomic nervous systems in the modulation of emotional WM tasks.

  17. The microcycle of inflammation and performance changes after a basketball match.

    Science.gov (United States)

    Chatzinikolaou, Athanasios; Draganidis, Dimitrios; Avloniti, Alexandra; Karipidis, Alexandros; Jamurtas, Athanasios Z; Skevaki, Chrysanthi L; Tsoukas, Dimitrios; Sovatzidis, Apostolis; Theodorou, Anastasios; Kambas, Antonis; Papassotiriou, Ioannis; Taxildaris, Kyriakos; Fatouros, Ioannis

    2014-01-01

    Basketball incorporates intense eccentric muscle activity that induces muscle microtrauma and an inflammatory response. This study investigated time-dependent inflammatory and performance responses during a weekly microcycle after a basketball match. Twenty elite-standard players underwent a trial that comprised a match followed by a 6-day simulated in-season microcycle. The trial was preceded by a control condition that did not have a match. Blood sampling and tests of maximal-intensity exercise performance and muscle damage occurred before each condition, immediately after the match and daily thereafter for 6 consecutive days. The match induced marked increases in heart rate, lactate, ammonia, glucose, non-esterified fatty acids and triglycerides. Performance deteriorated for 24-48 h after the match, whereas knee flexor and extensor soreness increased for 48 and 24 h post-match, respectively. Inflammatory (leukocytes, C-reactive protein, creatine kinase activity, adhesion molecules, cortisol, uric acid and cytokines) and oxidative stress (malondialdehyde, protein carbonyls, oxidised glutathione, antioxidant capacity, catalase and glutathione peroxidase) markers increased for ~24 h and subsided thereafter. Reduced glutathione declined for 24 h after exercise. These results suggest that a basketball match elicits moderate and relatively brief (~24-48 h) inflammatory responses, is associated with marked but short-lived performance deterioration, but is less stressful than other intermittent-type sports.

  18. Clinical success of shade guides arranged according to lightness measured digitally

    NARCIS (Netherlands)

    Khashayar, G.; Dozic, A.; Kleverlaan, C.; Feilzer, A.J.

    2012-01-01

    The aim of this study was to evaluate whether the VITA Classical shade guide arranged according to lightness allows clinicians to more often obtain a shade match than with an arrangement based on hue groups. A panel of 50 students determined the shade of the maxillary right central incisors of three

  19. The Effects of Matched Filter on Stable Performance of Semistrapdown Inertially Stabilized Platform

    Directory of Open Access Journals (Sweden)

    Feng Liu

    2016-01-01

    Full Text Available To enhance the optimization performance of matched filter and further improve line of sight (LOS stability of platform in inertial space, the proposed matched filter algorithm is conducted by adjusting matched filter coefficients of first-order low pass filter utilizing the regional search method based on invariance principle. The coefficients of the fraction molecule and denominator of proposed regional search algorithm are altered instead of denominator coefficients only being modified. Simulations are performed to verify the validity of inside factors performed with stabilization control model and quartz rate sensor (QRS mathematical model. The stable angular error is sharply alleviated, so the decoupling accuracy of airborne semistrapdown inertially stabilized platform is largely promoted. The optimization matched filter can effectively increase stability of LOS in inertial space.

  20. Kicking velocity and effect on match performance when using a smaller, lighter ball in women's football

    DEFF Research Database (Denmark)

    Andersen, Thomas B.; Krustrup, Peter; Bendiksen, Mads

    2016-01-01

    in passing success rate (NB: 68±1% and SB: 68±1%, p>0.05). In conclusion, high-level adult female footballers had a higher kicking speed when using a smaller, lighter ball, but no differences were observed during match-play with the 2 ball types in respect of technical-tactical and physical match performance......The present study evaluated the effect of a smaller, lighter ball on kicking speed and technical-tactical and physical match performance in high-level adult female footballers. In the laboratory test setting, the peak ball velocity was 6% higher with the new ball (NB) than the standard ball (SB.......08±0.42 and 1.94±0.38 km; p>0.05) and match-induced decrement in Yo-Yo IR1 performance (28 vs. 31%, respectively, p

  1. SHADE3 server

    DEFF Research Database (Denmark)

    Madsen, Anders Østergaard; Hoser, Anna Agnieszka

    2014-01-01

    A major update of the SHADE server (http://shade.ki.ku.dk) is presented. In addition to all of the previous options for estimating H-atom anisotropic displacement parameters (ADPs) that were offered by SHADE2, the newest version offers two new methods. The first method combines the original....... Tools are provided to set up the ab initio calculations and to derive the internal motion from the calculations. The new server was tested on a range of compounds where neutron diffraction data were available. In most cases, the results are significantly better than previous estimates, and for strong...

  2. Performance of cultivars of arugula under shade screens and open field /Desempenho de cultivares de rúcula sob telas de sombreamento e campo aberto

    Directory of Open Access Journals (Sweden)

    Sérgio Batista Silva de Souza

    Full Text Available Considering the increasing economic importance and due to the lack of technical information for growing arugula in tropical regions, it was evaluated the performance of arugula cultivated under different shade screens and at open field. Eight treatments were evaluated in a 2x4 factorial design, with two cultivars (Cultivada and Folha Larga x four crop environments (open field, greenhouse shading with 30%, 40% and 50%, with four replications in randomized blocks. The evaluated were plant height, leaf number, fresh and dry matter of the above ground part. Cultivars Folha Larga and Cultivada, showed satisfactory yield: that production in the open field showed acceptable values, showing viable cultivation in the winter in Cáceres-MT, even in warm temperatures, especially for early harvest at around 37 days after sowing. However, cultivation of arugula is favored using 50% shade screen, which can increase the production about 43%.Pelo crescente aumento da importância econômica e perante a escassez de informações técnicas para o cultivo da rúcula em regiões tropicais, avaliou-se o desempenho de rúcula cultivada sob diferentes telados de sombreamento e a campo aberto. Foram avaliados oito tratamentos em esquema fatorial 2x4, sendo duas cultivares (Cultivada e Folha Larga x quatro ambientes de cultivo (campo aberto, telado com sombrite 30%, 40% e 50% com quatro repetições, em blocos casualizados. As características avaliadas foram altura da planta, número de folhas e massas de matéria fresca e de matéria seca parte aérea. Foi observado que as cultivares Folha Larga e Cultivada apresentaram produção satisfatória: a produção em campo aberto apresentou valores aceitáveis, mostrando-se viável o cultivo no período de inverno em Cáceres-MT, mesmo sob temperaturas cálidas, principalmente para colheitas antecipadas por volta dos 37 dias após a semeadura. Porém, o cultivo de rúcula é favorecido sob tela preta 50%, que pode

  3. Effects of aniracetam on delayed matching-to-sample performance of monkeys and pigeons.

    Science.gov (United States)

    Pontecorvo, M J; Evans, H L

    1985-05-01

    A 3-choice, variable-delay, matching-to-sample procedure was used to evaluate drugs in both pigeons and monkeys while tested under nearly-identical conditions. Aniracetam (Roche 13-5057) improved accuracy of matching at all retention intervals following oral administration (12.5, 25 and 50 mg/kg) to macaque monkeys, with a maximal effect at 25 mg/kg. Aniracetam also antagonized scopolamine-induced impairment of the monkey's performance. Intramuscular administration of these same doses of aniracetam produced a similar, but not significant trend toward improved matching accuracy in pigeons.

  4. The UspIC: Performing Scan Matching Localization Using an Imaging Sonar

    Directory of Open Access Journals (Sweden)

    Antoni Burguera

    2012-06-01

    Full Text Available This paper presents a novel approach to localize an underwater mobile robot based on scan matching using a Mechanically Scanned Imaging Sonar (MSIS. When used to perform scan matching, this sensor presents some problems such as significant uncertainty in the measurements or large scan times, which lead to a motion induced distortion. This paper presents the uspIC, which deals with these problems by adopting a probabilistic scan matching strategy and by defining a method to strongly alleviate the motion induced distortion. Experimental results evaluating our approach and comparing it to previously existing methods are provided.

  5. The uspIC: performing scan matching localization using an imaging sonar.

    Science.gov (United States)

    Burguera, Antoni; Gonzàlez, Yolanda; Oliver, Gabriel

    2012-01-01

    This paper presents a novel approach to localize an underwater mobile robot based on scan matching using a Mechanically Scanned Imaging Sonar (MSIS). When used to perform scan matching, this sensor presents some problems such as significant uncertainty in the measurements or large scan times, which lead to a motion induced distortion. This paper presents the uspIC, which deals with these problems by adopting a probabilistic scan matching strategy and by defining a method to strongly alleviate the motion induced distortion. Experimental results evaluating our approach and comparing it to previously existing methods are provided.

  6. Technical match characteristics and influence of body anthropometry on playing performance in male elite team handball

    DEFF Research Database (Denmark)

    Michalsik, Lars Bojsen; Madsen, Klavs; Aagaard, Per

    2015-01-01

    elite team handball players in relation to playing position and body anthropometry. Based on continuous video recording of individual players during elite team handball match-play (62 tournament games, ∼4 players per game), computerized technical match analysis was performed in male elite team handball...... players along with anthropometric measurements over a 6 season time span. Technical match activities were distributed in 6 major types of playing actions (shots, breakthroughs, fast breaks, tackles, technical errors, and defense errors) and further divided into various subcategories (e.g., hard or light...... tackles, type of shot, claspings, screenings, and blockings). Players showed 36.9 ± 13.1 (group mean ± SD) high-intense technical playing actions per match with a mean total effective playing time of 53.85 ± 5.87 minutes. In offense, each player performed 6.0 ± 5.2 fast breaks, received 34.5 ± 21...

  7. Tooth shade measurements under standard and nonstandard illumination and their agreement with skin color.

    Science.gov (United States)

    Al-Dwairi, Ziad; Shaweesh, Ashraf; Kamkarfar, Sohrab; Kamkarfar, Shahrzad; Borzabadi-Farahani, Ali; Lynch, Edward

    2014-01-01

    The purpose of this study was to examine the relationship between skin color (shade) and tooth shade under standard and nonstandard illumination sources. Four hundred Jordanian participants (200 males, 200 females, 20 to 50 years of age) were studied. Skin colors were assessed and categorized using the L'Oreal and Revlon foundation shade guides (light, medium, dark). The Vita Pan Classical Shade Guide (VPCSG; Vident) and digital Vita EasyShade Intraoral Dental Spectrophotometer (VESIDS; Vident) were used to select shades in the middle thirds of maxillary central incisors; tooth shades were classified into four categories (highest, high, medium, low). Significant gender differences were observed for skin colors (P = .000) and tooth shade guide systems (P = .001 and .050 for VPCSG and VESIDS, respectively). The observed agreement was 100% and 93% for skin and tooth shade guides, respectively. The corresponding kappa statistic values were 1.00 and 0.79, respectively (substantial agreement, P < .001). The observed agreement between skin color and tooth shades (VPCSG and VESIDS) was approximately 50%. The digital tooth shade guide system can be a satisfactory substitute for classical tooth shade guides and clinical shade matching. There was only moderate agreement between skin color and tooth shade.

  8. Match activities of elite women soccer players at different performance levels.

    Science.gov (United States)

    Mohr, Magni; Krustrup, Peter; Andersson, Helena; Kirkendal, Donald; Bangsbo, Jens

    2008-03-01

    We sought to study the physical demands and match performance of women soccer players. Nineteen top-class and 15 high-level players were individually videotaped in competitive matches, and time-motion analysis were performed. The players changed locomotor activity >1,300 times in a game corresponding to every ~4 seconds and covered 9-11 km in total. The top-class players ran 28% longer (P women soccer players (1) top-class international players perform more intervals of high-intensity running than elite players at a lower level, (2) fatigue develops temporarily during and towards the end of a game, and (3) defenders have lower work rates than midfielders and attackers. The difference in high-intensity running between the 2 levels demonstrates the importance of intense intermittent exercise for match performance in women soccer. Thus, these aspects should be trained intensively in women soccer.

  9. Variability of GPS-derived running performance during official matches in elite professional soccer players.

    Science.gov (United States)

    Al Haddad, Hani; Méndez-Villanueva, Alberto; Torreño, Nacho; Munguía-Izquierdo, Diego; Suárez-Arrones, Luis

    2017-09-22

    The aim of this study was to assess the match-to-match variability obtained using GPS devices, collected during official games in professional soccer players. GPS-derived data from nineteen elite soccer players were collected over two consecutive seasons. Time-motion data for players with more than five full-match were analyzed (n=202). Total distance covered (TD), TD >13-18 km/h, TD >18-21 km/h, TD >21 km/h, number of acceleration >2.5-4 m.s-2 and >4 m.s-2 were calculated. The match-to-match variation in running activity was assessed by the typical error expressed as a coefficient of variation (CV,%) and the magnitude of the CV was calculated (effect size). When all players were pooled together, CVs ranged from 5% to 77% (first half) and from 5% to 90% (second half), for TD and number of acceleration >4 m.s-2, and the magnitude of the CVs were rated from small to moderate (effect size = 0.57-0.98). The CVs were likely to increase with running/acceleration intensity, and were likely to differ between playing positions (e.g., TD > 13-18 km/h 3.4% for second strikers vs 14.2% for strikers and 14.9% for wide-defenders vs 9.7% for wide-midfielders). Present findings indicate that variability in players' running performance is high in some variables and likely position-dependent. Such variability should be taken into account when using these variables to prescribe and/or monitor training intensity/load. GPS-derived match-to-match variability in official games' locomotor performance of professional soccer players is high in some variables, particularly for high-speed running, due to the complexity of match running performance and its most influential factors and reliability of the devices.

  10. Profile of match performance and heart rate response in Japanese amputee soccer.

    Science.gov (United States)

    Maehana, Hirofumi; Miyamoto, Aya; Koshiyama, Kenichi; Tanaka Yanagiya, Toshio; Yoshimura, Masafumi

    2017-05-05

    The purpose of this study was to profile the match performance and heart rate response in Japanese amputee soccer. Twelve amputee soccer players participated in this study. Match data were collected 20 samples in 4 matches. Match performances data such as total distance, high-intensity running (HIR: ≥13km·h-1) were collected using a global positioning systems technology. Heart rate (HR) was recorded using short-range radio telemetry. In addition, the rating of perceived exertion (RPE) was assessed immediately using Borg's original after the first half and the second half. This study showed that the distance covered over the 50 minutes of the match was 2984.2±56.1m, and it was significantly shorter in the second half than the first half (p<0.05). The distance covered by HIR was 205.3±100.5m, and there was no significant difference between the first half and the second half. Moreover, the mean HR during match was 176.8±7.9beats·min-1, which corresponded to 96.3% of HRmax. RPE was a high value of more 15 in both of the first half and the second half. This study was the first to evaluate competitive performance during matches in amputee soccer. Results of this study indicated that the exercise intensity was high in amputee soccer. It would be considered that causes were amputee soccer own rules and exercise style. These findings would serve as the reference when advance the future studies of amputee soccer.

  11. Technical and physical determinants of soccer match-play performance in elite youth soccer players.

    Science.gov (United States)

    Rowat, Owain; Fenner, Jonathan; Unnithan, Viswanath

    2017-04-01

    The aim of this study was to evaluate whether physical performance characteristics could be a better predictor than technical skills in determining the technical level of county soccer players in a match situation. With institutional ethics approval, 25 male youth soccer players aged 16-18.5 years from a professional soccer academy in South East Asia were selected and height and body mass were recorded. Players were tested for sexual maturity (pubertal development scale [PDS] self-assessment), aerobic capacity (yo-yo intermittent recovery test level 1 [YYIR1]), repeated sprint ability (7 x 35 m sprints) acceleration (15 m sprint) and four soccer skills tests (dribble with pass, dribbling speed, passing and shooting accuracy). Players' technical ability during match play was assessed in small-sided games of soccer (5 v 5) using a novel game technical scoring chart (scoring chart completed by coaches to assess technical performance in a match situation) developed from criteria (e.g., first touch, dribbling and two footedness) used by youth soccer coaches for talent identification. A Spearman's rank correlation showed the YYIR1 test and 15 m sprint test were limited in predicting technical match performance (r=0.03, P=0.88, r=-0.23, P=0.32 respectively). A Pearson product moment correlation showed that the repeated sprint test was also limited in predicting technical match performance (r=-0.34, P=0.14). A dribbling skill with a pass was found to be the best determinant of a player's technical ability in a match (r=-0.57, P=0.00). Talent identification and selection programs in Asian youth soccer should include a dribbling skill performed with a pass.

  12. The Impact of 120 Minutes of Match-Play on Recovery and Subsequent Match Performance: A Case Report in Professional Soccer Players

    Directory of Open Access Journals (Sweden)

    Nathan Winder

    2018-03-01

    Full Text Available The influence of a match including extra-time (ET on subsequent 90 min match performance and recovery has not been investigated. Four professional soccer players played in three competitive matches in a 7-day period: matches one (MD1 and three (MD3 lasted 90 min and match 2 (MD2 lasted 120 min (i.e., included ET. Physical (total and high-intensity (HI distance covered, accelerations and decelerations, and mechanical load and technical performances (pass and dribble accuracy were analyzed throughout match-play. Subjective measures of recovery and countermovement jump (CMJ height were made 36–42 h post-match. Post-MD2, there were very or most likely harmful effects of ET on CMJ height (−6 ± 9%, muscle soreness (+18 ± 12%, and fatigue (+27 ± 4% scores, and overall wellness score (−13 ± 5% compared to post-MD1. Furthermore, there were very likely harmful effects on muscle soreness (+13 ± 14%, wellness scores (−8 ± 10%, and CMJ height (−6 ± 9% post-MD3 vs. post-MD1. There was a possibly harmful effect of ET on HI distance covered during MD3, along with reductions in pass (−9.3% and dribble (−12.4% accuracy. An ET match negatively impacted recovery 36 h post-match. Furthermore, in some players, indices of performance in a 90 min match played 64 h following ET were compromised, with subsequent recovery also adversely affected.

  13. HANDBOOK OF SOCCER MATCH ANALYSIS: A SYSTEMATIC APPROACH TO IMPROVING PERFORMANCE

    Directory of Open Access Journals (Sweden)

    Christopher Carling

    2006-03-01

    Full Text Available DESCRIPTION This book addresses and appropriately explains the soccer match analysis, looks at the very latest in match analysis research, and at the innovative technologies used by professional clubs. This handbook is also bridging the gap between research, theory and practice. The methods in it can be used by coaches, sport scientists and fitness coaches to improve: styles of play, technical ability and physical fitness; objective feedback to players; the development of specific training routines; use of available notation software, video analysis and manual systems; and understanding of current academic research in soccer notational analysis. PURPOSE The aim is to provide a prepared manual on soccer match analysis in general for coaches and sport scientists. Thus, the professionals in this field would gather objective data on the players and the team, which in turn could be used by coaches and players to learn more about performance as a whole and gain a competitive advantage as a result. The book efficiently meets these objectives. AUDIENCE The book is targeted the athlete, the coach, the sports scientist professional or any sport conscious person who wishes to analyze relevant soccer performance. The editors and the contributors are authorities in their respective fields and this handbook depend on their extensive experience and knowledge accumulated over the years. FEATURES The book demonstrates how a notation system can be established to produce data to analyze and improve performance in soccer. It is composed of 9 chapters which present the information in an order that is considered logical and progressive as in most texts. Chapter headings are: 1. Introduction to Soccer Match Analysis, 2. Developing a Manual Notation System, 3. Video and Computerized Match Analysis Technology, 4. General Advice on Analyzing Match Performance, 5. Analysis and Presentation of the Results, 6. Motion Analysis and Consequences for Training, 7. What Match

  14. Effects of recovery type after a kickboxing match on blood lactate and performance in anaerobic tests.

    Science.gov (United States)

    Ouergui, Ibrahim; Hammouda, Omar; Chtourou, Hamdi; Gmada, Nabil; Franchini, Emerson

    2014-06-01

    To verify whether active recovery (AR) applied after a kickboxing match resulted in better performance in anaerobic tests when compared to passive recovery (PR). Eighteen kickboxers volunteered to participate on a Kickboxing match preceded and followed by anaerobic tests: squat jump (SJ), the counter movement jump (CMJ) and the upper-body Wingate test. Blood lactate (BL), heart rate (HR) and rate of perceived exertion (RPE) were analyzed before and after rounds. The recovery sessions consisted of 10min at 50% of maximal aerobic speed or PR. BL was measured at 3, 5 and 10 min after the match, while HR, RPE and anaerobic power were assessed after the recovery period. BL, HR and RPE increased significantly (Precovery type. The lactate removal was improved with AR when compared with PR, but AR did not improve subsequent performance.

  15. Team Performance Indicators Explain Outcome during Women’s Basketball Matches at the Olympic Games

    Directory of Open Access Journals (Sweden)

    Anthony S. Leicht

    2017-12-01

    Full Text Available The Olympic Games is the pinnacle international sporting competition with team sport coaches interested in key performance indicators to assist the development of match strategies for success. This study examined the relationship between team performance indicators and match outcome during the women’s basketball tournament at the Olympic Games. Team performance indicators were collated from all women’s basketball matches during the 2004–2016 Olympic Games (n = 156 and analyzed via linear (binary logistic regression and non-linear (conditional interference (CI classification tree statistical techniques. The most parsimonious linear model retained “defensive rebounds”, “field-goal percentage”, “offensive rebounds”, “fouls”, “steals”, and “turnovers” with a classification accuracy of 85.6%. The CI classification tree retained four performance indicators with a classification accuracy of 86.2%. The combination of “field-goal percentage”, “defensive rebounds”, “steals”, and “turnovers” provided the greatest probability of winning (91.1%, while a combination of “field-goal percentage”, “steals”, and “turnovers” provided the greatest probability of losing (96.7%. Shooting proficiency and defensive actions were identified as key team performance indicators for Olympic female basketball success. The development of key defensive strategies and/or the selection of athletes highly proficient in defensive actions may strengthen Olympic match success. Incorporation of non-linear analyses may provide teams with superior/practical approaches for elite sporting success.

  16. Performance Testing of GPU-Based Approximate Matching Algorithm on Network Traffic

    Science.gov (United States)

    2015-03-01

    Academic Group iv THIS PAGE INTENTIONALLY LEFT BLANK v ABSTRACT Insider threat is one of the risks both government and private organizations have...Karp algorithm is very useful in detecting plagiarism because it is capable of performing multiple pattern matching. (2) Knuth-Morris-Pratt (KMP

  17. Impacts of Playing after School on Academic Performance: A Propensity Score Matching Approach

    Science.gov (United States)

    Li, Yajuan; Palma, Marco A.; Xu, Zhicheng Phil

    2017-01-01

    We present a plausible causal analysis of the impact of playing after school on academic performance and investigate parental support as a potential channel. We exploit the data from the 2011 Trends in International Mathematics and Science Survey to evaluate the effects by using a propensity score matching approach. The results show that playing…

  18. Locomotion Characteristics and Match-Induced Impairments in Physical Performance in Male Elite Team Handball Players

    DEFF Research Database (Denmark)

    Michalsik, L B; Aagaard, Per; Madsen, K

    2013-01-01

    The purpose of this study was to determine the physical demands and match-induced impairments in physical performance in male elite Team Handball (TH) players in relation to playing position. Male elite TH field players were closely observed during 6 competitive seasons. Each player (wing players...

  19. Physical match performance of youth football players in relation to physical capacity

    DEFF Research Database (Denmark)

    Rebelo, António; Brito, João; Seabra, André

    2014-01-01

    Abstract The aims of the study were to (1) analyse the activity profile of youth football players during competitive matches, and (2) examine the relationship between physical match performance and intermittent exercise performance as well as [Formula: see text]. Thirty youth male football players......, aged 14-17 years, carried out a laboratory treadmill test for determination of [Formula: see text] as well as the Yo-Yo intermittent recovery level 1 (Yo-Yo IR1) and Yo-Yo intermittent endurance level 2 (Yo-Yo IE2) tests. Time-motion analysis and heart rate (HR) recordings were performed during two....... The total distance covered in the last 13.3-min period of the match was 40%, 26% and 17% lower than in the first, second and fourth 13.3-min periods of the match, respectively (P0.05) or Yo-Yo test performances (r=0.09-0.26; P>0.05). In conclusion, youth football players have a high heart-rate loading...

  20. Effects of consecutive days of match play on technical performance in tennis.

    Science.gov (United States)

    Gescheit, Danielle T; Duffield, Rob; Skein, Melissa; Brydon, Neil; Cormack, Stuart J; Reid, Machar

    2017-10-01

    Elite tennis is characterised by repeated bouts of up to 5-set match play, yet little is known about the technical requirements of shots played. This study therefore investigated technical performance changes over consecutive days of prolonged, simulated tennis match play. A total of 7 well-trained men tennis players performed 4 consecutive days of competitive 4-h match play. Matches were notated to determine between-day changes in groundstroke and serve performance, as well as point and match durations. Changes ≥75% likely to exceed the smallest important effect size (0.2) were considered meaningful and represented as effect size ± 90% confidence interval. Effective playing time reduced on days 3 and 4, alongside likely increases in "stretch" groundstrokes over the 4 days (mean effect size ± 90% confidence interval; 0.57 ± 0.38) and "stretch" backhand returns on days 2 and 3 (0.39 ± 0.54 and 0.67 ± 0.55). Relative unforced errors increased on day 4 (vs. day 2; 0.36 ± 0.22) and second-serve winning percentage reduced after day 1 (-0.47 ± 0.50). Further, a likely increase in emotional outbursts characterised day 3 (vs. day 2; 0.73 ± 0.57). Consecutive-day match play impairs hitting accuracy, stroke positioning and emotional responses; an understanding of which prepares players for elite-standard tennis tournament play.

  1. Physical and psychomotor performance of Australian football and rugby league officials during a match simulation.

    Science.gov (United States)

    Elsworthy, Nathan; Burke, Darren; Dascombe, Ben J

    2016-01-01

    The onset of exercise facilitates an improvement in psychomotor performance until the second ventilatory threshold, after which performance is reduced. This inverted-U relationship appears valid for incremental and steady-state exercise, however, not for intermittent exercise. This study examined changes in psychomotor performance of team sport officials during a laboratory-based match simulation. Twelve elite Australian football (n = 5) and rugby league (n = 7) officials (32.5 ± 5.5 years; 180.0 ± 6.8 cm; 78.8 ± 7.6 kg) completed the match simulation on a non-motorised treadmill. Physiological measures were routinely taken, while psychomotor performance was assessed using the Eriksen flanker task (multiple-choice response time). Significant reductions (P  0.05) in psychomotor performance at different time points were observed. Response time was significantly improved when running above 65% of maximal sprinting speed (P < 0.01). This data questions the application of the inverted-U hypothesis for intermittent exercise and suggests that the short high-intensity efforts may not result in the same physiological events that limit psychomotor performance during sustained high-intensity exercise. More so, the high-intensity efforts during the match protocol appeared to promote psychomotor performance during the intermittent exercise.

  2. Caffeine-containing energy drink improves physical performance of elite rugby players during a simulated match.

    Science.gov (United States)

    Del Coso, Juan; Ramírez, Juan A; Muñoz, Gloria; Portillo, Javier; Gonzalez-Millán, Cristina; Muñoz, Víctor; Barbero-Álvarez, José C; Muñoz-Guerra, Jesús

    2013-04-01

    The purpose of this study was to investigate the effectiveness of a caffeine-containing energy drink in enhancing rugby players' physical performance during a simulated match. A second purpose was to determine the urinary caffeine excretion derived from the energy drink intake. In a randomized and counterbalanced order, 26 elite rugby players (mean ± SD for age and body mass, 25 ± 2 y and 93 ± 15 kg) played 2 simulated rugby games (2 × 30 min) 60 min after ingesting (i) 3 mg of caffeine per kilogram of body mass in the form of an energy drink (Fure, ProEnergetics) or (ii) the same drink without caffeine (placebo). During the matches, the individual running distance and the instantaneous speed were measured, and the number of running actions above 20 km·h(-1) (i.e., sprints) were determined, using global positioning system devices. The number of impacts above 5 g during the matches was determined by accelerometry. The ingestion of the energy drink, compared with the placebo, increased the total distance covered during the match (4749 ± 589 vs 5139 ± 475 m, p caffeine concentration (0.1 ± 0.1 vs 2.4 ± 0.9 μg·mL(-1), p caffeine dose equivalent to 3 mg·kg(-1) considerably enhanced the movement patterns of rugby players during a simulated match.

  3. Physical characteristics of elite adolescent female basketball players and their relationship to match performance

    Directory of Open Access Journals (Sweden)

    Fort-Vanmeerhaeghe Azahara

    2016-12-01

    Full Text Available There were two aims of this study: first, to investigate physical fitness and match performance differences between under-16 (U16 and under-18 (U18 female basketball players, and second, to evaluate the relationship between physical fitness and game-related performances. Twenty-three young, female, elite Spanish basketball players (16.2 1.2 years participated in the study. The sample was divided into two groups: U16 and U18 players. The average scores from pre- and post-season physical fitness measurements were used for subsequent analyses. Anthropometric variables were also measured. To evaluate game performance, game-related statistics, including the number of games and minutes played, points, rebounds, assists, steals and blocks per game, were recorded for every competitive match in one season. When anthropometric and physical performance variables were compared between groups, the U18 group demonstrated significantly (p<0.05 higher values in upper (+21.2% and lower (+27.11% limb strength compared to the U16 group. Furthermore, no significant differences between groups were observed in match performance outcomes. Only two performance variables, steals and assists per game, correlated significantly with jump capacity, speed, agility, anaerobic power, repeated sprint ability and aerobic power (p ≤ 0.005. These findings can help optimize training programs for young, elite female basketball players.

  4. The Effect of Carbohydrate Ingestion on Performance during a Simulated Soccer Match

    Directory of Open Access Journals (Sweden)

    Julia H. Goedecke

    2013-12-01

    Full Text Available Aim: This study investigated how performance was affected after soccer players, in a postprandial state, ingested a 7% carbohydrate (CHO solution compared to a placebo (0% CHO during a simulated soccer match. Methods: Using a double-blind placebo-controlled design, 22 trained male league soccer players (age: 24 ± 7 years, wt: 73.4 ± 12.0 kg, VO2max: 51.8 ± 4.3 mL O2/kg/min completed two trials, separated by 7 days, during which they ingested, in random order, 700 mL of either a 7% CHO or placebo drink during a simulated soccer match. Ratings of perceived exertion (RPE, agility, timed and run to fatigue were measured during the trials. Results: Change in agility times was not altered by CHO vs. placebo ingestion (0.57 ± 1.48 vs. 0.66 ± 1.00, p = 0.81. Timed runs to fatigue were 381 ± 267 s vs. 294 ± 159 s for the CHO and placebo drinks, respectively (p = 0.11. Body mass modified the relationship between time to fatigue and drink ingestion (p = 0.02 for drink × body mass, such that lower body mass was associated with increased time to fatigue when the players ingested CHO, but not placebo. RPE values for the final stage of the simulated soccer match were 8.5 ± 1.7 and 8.6 ± 1.5 for the CHO and placebo drinks respectively (p = 0.87. Conclusions: The group data showed that the 7% CHO solution (49 g CHO did not significantly improve performance during a simulated soccer match in league soccer players who had normal pre-match nutrition. However, when adjusting for body mass, increasing CHO intake was associated with improved time to fatigue during the simulated soccer match.

  5. Evaluation of Cellular Shades in the PNNL Lab Homes

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, Joseph M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sullivan, Greg [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cort, Katherine A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Metzger, Cheryn E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Merzouk, Massine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-11-01

    This report examines the energy performance of cellular shade window coverings in a matched pair of all-electric, factory-built “Lab Homes” located on the Pacific Northwest National Laboratory (PNNL) campus in Richland, Washington. The 1500-square-foot homes were identical in construction and baseline performance, which allowed any difference in energy and thermal performance between the baseline home and the experimental home to be attributed to the retrofit technology installed in the experimental home. To assess the performance of high efficiency window attachments in a residential retrofit application, the building shell air leakage, energy use, and interior temperatures of each home were compared during the 2015 -2016 winter heating and summer cooling seasons. Hunter Douglas Duette® Architella® Trielle™ opaque honeycomb “cellular” shades were installed over double-pane clear-glass, aluminum-frame primary windows in the experimental home and were compared to identical primary windows with no window coverings and with standard typical white vinyl horizontal blind window coverings in the baseline home.

  6. Tints, Shades and Frost

    Science.gov (United States)

    Sterling, Joan

    2009-01-01

    This article describes a classroom art project inspired by the work of Robert Frost, one of the most acclaimed and beloved American poets of all time. Using tints and shades in a composition, this project demonstrates how quality literature may be incorporated into elementary art lessons in a very useful way, making art an important complement to…

  7. The match between motivation and performance management of health sector workers in Mali

    Directory of Open Access Journals (Sweden)

    Touré Hamadassalia

    2006-02-01

    Full Text Available Abstract Human resources for health (HRH play a central role in improving accessibility to services and quality of care. Their motivation influences this. In Mali, operational research was conducted to identify the match between motivation and the range and use of performance management activities. Objectives To describe the factors motivating and demotivating health workers in Mali and match the motivators with the implementation of performance management. Methods First an exploratory qualitative study was conducted: 28 interviews and eight group discussions were held. This was followed by a cross-sectional survey, during which 370 health workers were interviewed. The study population consisted of health workers of eight professional groups. The following issues were investigated: • motivating and demotivating factors; • experiences with performance management, including: job descriptions, continuous education, supervision, performance appraisal and career development. Findings The study showed that the main motivators of health workers were related to responsibility, training and recognition, next to salary. These can be influenced by performance management (job descriptions, supervisions, continuous education and performance appraisal. Performance management is not optimally implemented in Mali, as job descriptions were not present or were inappropriate; only 13% of interviewees received 4× per year supervision, and training needs were not analysed. Some 48% of the interviewees knew their performance had been appraised in the last two years; the appraisals were perceived as subjective. No other methods were in place to show recognition. The results enabled the research team to propose adaptations or improvements upon existing performance management. Conclusion The results showed the importance of adapting or improving upon performance management strategies to influence staff motivation. This can be done by matching performance management

  8. The single match approach to strike rate adjustments in batting performance measures in cricket.

    Science.gov (United States)

    Lemmer, Hermanus H

    2011-01-01

    Batting performance measures containing strike rate adjustments take into account the important fact that if two batsmen had scored the same number of runs in a match, the one with the better strike rate had performed best. But match conditions can influence the batting and bowling performances of cricket players. On a good pitch a batsman can get a good score at a high strike rate, but if the pitch was bad, a similar good score is normally accompanied by a much lower strike rate. The main objective of this study is to propose a method that can be used to make batsmen's scores comparable despite the fact that playing conditions might have been very different. The number of runs scored by a batsman is adjusted by comparing his strike rate with the overall strike rate of all the players in the specific match. These adjusted runs are then used in the most appropriate formula to calculate the average of the batsman. The method is illustrated by using the results of the Indian Premier League 2009 Twenty20 Series played during May and June 2009. The main conclusion is that the traditional average is not the most appropriate measure to compare batsmen's performances after conclusion of a short series. Key pointsIt is unfair to compare the score of a batsman obtained on a good pitch under ideal batting conditions with that of a batsman who had to battle under severe conditions.By comparing a batsman's strike rate with the overall strike rate of the players in the specific match, his score can be adjusted to get a better figure for his true performance.The results demonstrate clearly that the use of adjusted scores lead to rankings that differ from those based on the traditional measures.

  9. Quality and matching performance analysis of three-dimensional unraveled fingerprints

    Science.gov (United States)

    Wang, Yongchang; Hao, Qi; Fatehpuria, Abhishika; Hassebrook, Laurence G.; Lau, Daniel L.

    2010-07-01

    The use of fingerprints as a biometric is both the oldest mode of computer-aided personal identification and the most-relied-on technology in use today. However, current acquisition methods have some challenging and peculiar difficulties. For higher performance fingerprint data acquisition and verification, a novel noncontact 3-D fingerprint scanner is investigated, where both the detailed 3-D and albedo information of the finger is obtained. The obtained high-resolution 3-D prints are further converted into 3-D unraveled prints, to be compatible with traditional 2-D automatic fingerprint identification systems. As a result, many limitations imposed on conventional fingerprint capture and processing can be reduced by the unobtrusiveness of this approach and the extra depth information acquired. To compare the quality and matching performances of 3-D unraveled with traditional 2-D plain fingerprints, we collect both 3-D prints and their 2-D plain counterparts. The print quality and matching performances are evaluated and analyzed by using National Institute of Standard Technology fingerprint software. Experimental results show that the 3-D unraveled print outperforms the 2-D print in both quality and matching performances.

  10. THE SINGLE MATCH APPROACH TO STRIKE RATE ADJUSTMENTS IN BATTING PERFORMANCE MEASURES IN CRICKET

    Directory of Open Access Journals (Sweden)

    Hermanus H. Lemmer

    2011-12-01

    Full Text Available Batting performance measures containing strike rate adjustments take into account the important fact that if two batsmen had scored the same number of runs in a match, the one with the better strike rate had performed best. But match conditions can influence the batting and bowling performances of cricket players. On a good pitch a batsman can get a good score at a high strike rate, but if the pitch was bad, a similar good score is normally accompanied by a much lower strike rate. The main objective of this study is to propose a method that can be used to make batsmen's scores comparable despite the fact that playing conditions might have been very different. The number of runs scored by a batsman is adjusted by comparing his strike rate with the overall strike rate of all the players in the specific match. These adjusted runs are then used in the most appropriate formula to calculate the average of the batsman. The method is illustrated by using the results of the Indian Premier League 2009 Twenty20 Series played during May and June 2009. The main conclusion is that the traditional average is not the most appropriate measure to compare batsmen's performances after conclusion of a short series.

  11. STUDIES OF SHADING LEVELS AND NUTRITION SOURCES ON GROWTH, YIELD

    Directory of Open Access Journals (Sweden)

    Edi Purwanto

    2011-10-01

    Full Text Available Growth and biochemical content of medicinal crops are influenced by agroecosystems characteristics . The objective of this research was to determine the optimum shading level and type of fertilizer as sources of nutrition on the growth, yield, and andrographolide content of sambiloto. The experiment used Split Plot Design with basic design of Randomized Complete Block Design arranged with two treatment factors, with three replications. The first factor as the main plot was shading levels, namely without shading, 25% shading, 50% shading, and 75% shading. The second factor as the sub plot was sources of nutrition reprented by type of fertilizer, namely NPK fertilizer, cow stable fertilizer, and compost fertilizer. The result of research indicated that shading level and the kind of nutrition influenced some growth and yield variables such as number of leaves, number of branches, plant height, plant dry weight and simplisia weight, and andrographolide content. Interaction of shading level at 25% and straw compost fertilizer performed best in growth characteristics, while the highest andrographolide content resulted from the treatment combination of 50% shading level and straw compost fertilizer.

  12. Performance of peaky template matching under additive white Gaussian noise and uniform quantization

    Science.gov (United States)

    Horvath, Matthew S.; Rigling, Brian D.

    2015-05-01

    Peaky template matching (PTM) is a special case of a general algorithm known as multinomial pattern matching originally developed for automatic target recognition of synthetic aperture radar data. The algorithm is a model- based approach that first quantizes pixel values into Nq = 2 discrete values yielding generative Beta-Bernoulli models as class-conditional templates. Here, we consider the case of classification of target chips in AWGN and develop approximations to image-to-template classification performance as a function of the noise power. We focus specifically on the case of a uniform quantization" scheme, where a fixed number of the largest pixels are quantized high as opposed to using a fixed threshold. This quantization method reduces sensitivity to the scaling of pixel intensities and quantization in general reduces sensitivity to various nuisance parameters difficult to account for a priori. Our performance expressions are verified using forward-looking infrared imagery from the Army Research Laboratory Comanche dataset.

  13. Performance of seedlings of a shade-tolerant tropical tree species after moderate addition of N and P

    Directory of Open Access Journals (Sweden)

    Daisy eCárate Tandalla

    2015-12-01

    Full Text Available Nitrogen deposition to tropical forests is predicted to increase in future in many regions due to agricultural intensification. We conducted a seedling transplantation experiment in a tropical premontane forest in Ecuador with a locally abundant late-successional tree species (Pouteria torta, Sapotaceae aimed at detecting species-specific responses to moderate N and P addition and to understand how increasing nutrient availability will affect regeneration. From locally collected seeds, 320 seedlings were produced and transplanted to the plots of the Ecuadorian Nutrient Manipulation Experiment (NUMEX with three treatments (moderate N addition: 50 kg N ha-1 yr-1, moderate P addition: 10 kg P ha-1 yr-1 and combined N and P addition and a control (80 plants per treatment. After 12 months, mortality, relative growth rate, leaf nutrient content and leaf herbivory rate were measured.N and NP addition significantly increased the mortality rate (70 % vs. 54 % in the control. However, N and P addition also increased the diameter growth rate of the surviving seedlings. N and P addition did not alter foliar nutrient concentrations and leaf N:P ratio, but N addition decreased the leaf C:N ratio and increased SLA. P addition (but not N addition resulted in higher leaf area loss to herbivore consumption and also shifted carbon allocation to root growth. This fertilization experiment with a common rainforest tree species conducted in old-growth forest shows that already moderate doses of added N and P are affecting seedling performance which most likely will have consequences for the competitive strength in the understory and the recruitment success of P. torta. Simultaneous increases in growth, herbivory and mortality rates make it difficult to assess the species’ overall performance and predict how a future increase in nutrient deposition will alter the abundance of this species in the Andean tropical montane forests.

  14. Performance of seedlings of a shade-tolerant tropical tree species after moderate addition of N and P

    Science.gov (United States)

    Cárate Tandalla, Daisy; Leuschner, Christoph; Homeier, Jürgen

    2015-12-01

    Nitrogen deposition to tropical forests is predicted to increase in future in many regions due to agricultural intensification. We conducted a seedling transplantation experiment in a tropical premontane forest in Ecuador with a locally abundant late-successional tree species (Pouteria torta, Sapotaceae) aimed at detecting species-specific responses to moderate N and P addition and to understand how increasing nutrient availability will affect regeneration. From locally collected seeds, 320 seedlings were produced and transplanted to the plots of the Ecuadorian Nutrient Manipulation Experiment (NUMEX) with three treatments (moderate N addition: 50 kg N ha-1 yr-1, moderate P addition: 10 kg P ha-1 yr-1 and combined N and P addition) and a control (80 plants per treatment). After 12 months, mortality, relative growth rate, leaf nutrient content and leaf herbivory rate were measured. N and NP addition significantly increased the mortality rate (70 % vs. 54 % in the control). However, N and P addition also increased the diameter growth rate of the surviving seedlings. N and P addition did not alter foliar nutrient concentrations and leaf N:P ratio, but N addition decreased the leaf C:N ratio and increased SLA. P addition (but not N addition) resulted in higher leaf area loss to herbivore consumption and also shifted carbon allocation to root growth. This fertilization experiment with a common rainforest tree species conducted in old-growth forest shows that already moderate doses of added N and P are affecting seedling performance which most likely will have consequences for the competitive strength in the understory and the recruitment success of P. torta. Simultaneous increases in growth, herbivory and mortality rates make it difficult to assess the species' overall performance and predict how a future increase in nutrient deposition will alter the abundance of this species in the Andean tropical montane forests.

  15. Shades of Friendship

    DEFF Research Database (Denmark)

    Dungey, Claire Elisabeth

    2015-01-01

    Summary Based on 12 months of ethnographic fieldwork over a period of three years in southwestern Uganda, this thesis is an exploration of how children and youth from the surrounding area of Kisoro town value schooling as a means of cultivating friendships and moral values. In particular......, it focuses on the multifaceted shades of friendships, and how relationships to others are marked with moral uncertainty. More generally, I argue that friendships among schoolchildren are played out through trust and sharing but always in the shade of mistrust, and secrecy. The region has been and still......, pretend, steal or stop giving. Within the category of friendship, as well as other relationships, moralities are constantly negotiated, evaluated and worked on. In previous research concerning the area, ethnicity is sometimes overrepresented in an academic debate at the expense of understanding other ways...

  16. Kicking Velocity and Effect on Match Performance When using a Smaller, Lighter Ball in Women's Football.

    Science.gov (United States)

    Andersen, T B; Krustrup, P; Bendiksen, M; Orntoft, C O; Randers, M B; Pettersen, S A

    2016-11-01

    The present study evaluated the effect of a smaller, lighter ball on kicking speed and technical-tactical and physical match performance in high-level adult female footballers. In the laboratory test setting, the peak ball velocity was 6% higher with the new ball (NB) than the standard ball (SB) (26.5±0.5 vs. 25.1±0.5 m·s -1 , p0.05), blood lactate (90 min: 4.7±1.7 and 4.0±1.7 mmol·l -1 ; p>0.05), total distance covered (10.6±0.9 and 10.4±0.8 km; p>0.05), intense running (>16 km/h) (2.08±0.42 and 1.94±0.38 km; p>0.05) and match-induced decrement in Yo-Yo IR1 performance (28 vs. 31%, respectively, pball types, and there was no difference in passing success rate (NB: 68±1% and SB: 68±1%, p>0.05). In conclusion, high-level adult female footballers had a higher kicking speed when using a smaller, lighter ball, but no differences were observed during match-play with the 2 ball types in respect of technical-tactical and physical match performance. The physical loading was high for the players when playing with both ball types. © Georg Thieme Verlag KG Stuttgart · New York.

  17. Weak Relationships between Stint Duration, Physical and Skilled Match Performance in Australian Football

    Directory of Open Access Journals (Sweden)

    David M. Corbett

    2017-10-01

    Full Text Available Australian Rules football comprises physical and skilled performance for more than 90 min of play. The cognitive and physiological fatigue experienced by participants during a match may reduce performance. Consequently, the length of time an athlete is on the field before being interchanged (known as a stint, is a key tactic which could maximize the skill and physical output of the Australian Rules athlete. This study developed two methods to quantify the relationship between athlete time on field, skilled and physical output. Professional male athletes (n = 39 from a single elite Australian Rules football club participated, with physical output quantified via player tracking systems across 22 competitive matches. Skilled output was calculated as the sum of involvements performed by each athlete, collected from a commercial statistics company. A random intercept and slope model was built to identify how a team and individuals respond to physical outputs and stint lengths. Stint duration (mins, high intensity running (speeds >14.4 km · hr−1 per minute, meterage per minute and very high intensity running (speeds >25 km·hr−1 per minute had some relationship with skilled involvements. However, none of these relationships were strong, and the direction of influence for each player was varied. Three conditional inference trees were computed to identify the extent to which combinations of physical parameters altered the anticipated skilled output of players. Meterage per minute, player, round number and duration were all related to player involvement. All methods had an average error of 10 to 11 involvements, per player per match. Therefore, other factors aside from physical parameters extracted from wearable technologies may be needed to explain skilled output within Australian Rules football matches.

  18. Systematic review on sports performance in beach volleyball from match analysis

    Directory of Open Access Journals (Sweden)

    Alexandre Igor Araripe Medeiros

    2014-10-01

    Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2014v16n6p698   The present article aimed to perform a systematic review of the available literature in relation to the analysis of sports performance in beach volleyball from match analysis. Web of Science, SportDiscus®, PubMed, Scopus and Academic Search Complete databases were used to identify peer-reviewed published articles. The authors conducted a content analysis according to goals, variables of analysis and methods used in studies. In general, three research lines were determined: analysis of the functional dependence of the game actions and their relation with success, performance according to gender, and the effect of changing the rules on the game performance. In relation to methodology, an evolution from descriptive studies to studies of comparative nature can be seen and, more recently, there has been a focus on predictive nature. This new trend breaks with the research based on simple cause and effect relations, and focuses on the analysis of the game events, namely related to tactical-technical performance indicators, in a non-linear and interactive way, considering the game as a complex and dynamic system. The limitations of the studies analyzed show the need for further studies to investigate the identification of game patterns for the different game levels; integration of situational variables in the study of the performance of teams (such as match status and the quality of opposition.

  19. Influence of Knowledge of Task Endpoint on Pacing and Performance During Simulated Rugby League Match Play.

    Science.gov (United States)

    Highton, Jamie; Mullen, Thomas; Twist, Craig

    2017-10-01

    To examine the influence of knowledge of exercise duration on pacing and performance during simulated rugby league match play. Thirteen male university rugby players completed 3 simulated rugby league matches (RLMSP-i) on separate days in a random order. In a control trial, participants were informed that they would be performing 2 × 23-min bouts (separated by 20 min) of the RLMSP-i (CON). In a second trial, participants were informed that they would be performing 1 × 23-min bout of the protocol but were then asked to perform another 23-min bout (DEC). In a third trial, participants were not informed of the exercise duration and performed 2 × 23-min bouts (UN). Distance covered and high-intensity running were higher in CON (4813 ± 167 m, 26 ± 4.1 m/min) than DEC (4764 ± 112 m, 25.2 ± 2.8 m/min) and UN (4744 ± 131 m, 24.4 m/min). Compared with CON, high-intensity running and peak speed were typically higher for DEC in bout 1 and lower in bout 2 of the RLMSP-i, while UN was generally lower throughout. Similarly, DEC resulted in an increased heart rate, blood lactate, and rating of perceived exertion than CON in bout 1, whereas these variables were lower throughout the protocol in UN. Pacing and performance during simulated rugby league match play depend on an accurate understanding of the exercise endpoint. Applied practitioners should consider informing players of their likely exercise duration to maximize running.

  20. Effects of different post-match recovery interventions on subsequent athlete hormonal state and game performance.

    Science.gov (United States)

    Crewther, Blair T; Cook, Christian J

    2012-06-25

    We tested the effects of different post-match recovery interventions on the subsequent hormonal responses to a physical stress-test and game performance in professional rugby union players. On four occasions, participants (n=12) completed a video session (1 h each) with accompanying coach feedback the day after a rugby union match. The interventions showed either video footage of player mistakes with negative coach feedback (NCF1) or player successes with positive feedback (PCF1). Both approaches were repeated (NCF2 and PCF2). In the following week, participants were assessed for their free testosterone (T) and cortisol (C) responses to a physical stress-test, pre-game T and game-ranked performance. The PFC1 and PCF2 approaches were both associated with significantly (pgame T concentrations and superior game-ranked performances than the NCF approaches (pgame presentation of specific video footage combined with different coach feedbacks appeared to influence the free hormonal state of rugby players and game performance several days later. Therefore, within the sporting context, future behaviour and performance might be modified through the use of simple psychological strategies. These data are applicable to generalised human stress responses and their modifiability by prior exposure to a stressor. Copyright © 2012 Elsevier Inc. All rights reserved.

  1. Physical characteristics of elite adolescent female basketball players and their relationship to match performance.

    Science.gov (United States)

    Fort-Vanmeerhaeghe, Azahara; Montalvo, Alicia; Latinjak, Alexander; Unnithan, Viswanath

    2016-12-01

    There were two aims of this study: first, to investigate physical fitness and match performance differences between under-16 (U16) and under-18 (U18) female basketball players, and second, to evaluate the relationship between physical fitness and game-related performances. Twenty-three young, female, elite Spanish basketball players (16.2 1.2 years) participated in the study. The sample was divided into two groups: U16 and U18 players. The average scores from pre- and post-season physical fitness measurements were used for subsequent analyses. Anthropometric variables were also measured. To evaluate game performance, game-related statistics, including the number of games and minutes played, points, rebounds, assists, steals and blocks per game, were recorded for every competitive match in one season. When anthropometric and physical performance variables were compared between groups, the U18 group demonstrated significantly (pagility, anaerobic power, repeated sprint ability and aerobic power (p ≤ 0.005). These findings can help optimize training programs for young, elite female basketball players.

  2. Physical characteristics of elite adolescent female basketball players and their relationship to match performance

    Science.gov (United States)

    Montalvo, Alicia; Latinjak, Alexander; Unnithan, Viswanath

    2016-01-01

    Abstract There were two aims of this study: first, to investigate physical fitness and match performance differences between under-16 (U16) and under-18 (U18) female basketball players, and second, to evaluate the relationship between physical fitness and game-related performances. Twenty-three young, female, elite Spanish basketball players (16.2 1.2 years) participated in the study. The sample was divided into two groups: U16 and U18 players. The average scores from pre- and post-season physical fitness measurements were used for subsequent analyses. Anthropometric variables were also measured. To evaluate game performance, game-related statistics, including the number of games and minutes played, points, rebounds, assists, steals and blocks per game, were recorded for every competitive match in one season. When anthropometric and physical performance variables were compared between groups, the U18 group demonstrated significantly (pjump capacity, speed, agility, anaerobic power, repeated sprint ability and aerobic power (p ≤ 0.005). These findings can help optimize training programs for young, elite female basketball players. PMID:28149421

  3. Evaluation of Dental Shade Guide Variability Using Cross-Polarized Photography.

    Science.gov (United States)

    Gurrea, Jon; Gurrea, Marta; Bruguera, August; Sampaio, Camila S; Janal, Malvin; Bonfante, Estevam; Coelho, Paulo G; Hirata, Ronaldo

    2016-01-01

    This study evaluated color variability in the A hue between the VITA Classical (VITA Zahnfabrik) shade guide and four other VITA-coded ceramic shade guides using a Canon EOS 60D camera and software (Photoshop CC, Adobe). A total of 125 photographs were taken, 5 per shade tab for each of 5 shades (A1 to A4) from the following shade guides: VITA Classical (control), IPS e.max Ceram (Ivoclar Vivadent), IPS d.SIGN (Ivoclar Vivadent), Initial ZI (GC), and Creation CC (Creation Willi Geller). Photos were processed with Adobe Photoshop CC to allow standardized evaluation of hue, chroma, and value between shade tabs. None of the VITA-coded shade tabs fully matched the VITA Classical shade tab for hue, chroma, or value. The VITA-coded shade guides evaluated herein showed an overall unmatched shade in all tabs when compared with the control, suggesting that shade selection should be made using the guide produced by the manufacturer of the ceramic intended for the final restoration.

  4. Analysis of the distances covered and technical actions performed by professional tennis players during official matches.

    Science.gov (United States)

    Pereira, Tiago Julio Costa; Nakamura, Fábio Yuzo; de Jesus, Mayra Tardelli; Vieira, Claudio Luís Roveri; Misuta, Milton Shoiti; de Barros, Ricardo Machado Leite; Moura, Felipe Arruda

    2017-02-01

    The purpose of this study was to analyse the physical and technical performances of professional tennis players during official matches. The trajectories of eight players were obtained during matches, using an automatic tracking method. The distances covered and technical performances were analysed for the first and second sets. The athletes covered (mean ± standard deviation) a total of 1702.4 ± 448.2 m in the first set, 1457.6 ± 678.1 m in the second set and 3160.0 ± 880.1 in the entire match. No differences were found between the sets for the physical variables (lateral and forward displacements, distance covered per rally, per game and per set, and the percentage of time spent in each range of velocity). However, the distances covered by the athletes during the rallies in which they were serving (median = 5.2; interquartile range (IQR) = 6.7 m) were statistically smaller than when they were returning (median = 6.2; IQR = 7.7 m). Forehand ground stroke proficiency decreased from the first (mean ± standard deviation: 75.2 ± 4.11%) to the second set (mean ± standard deviation = 65.5 ± 14.3%). In conclusion, tennis players did not present reduced physical performance from the first to the second set.

  5. Influence of an intensified competition on fatigue and match performance in junior rugby league players.

    Science.gov (United States)

    Johnston, Rich D; Gabbett, Tim J; Jenkins, David G

    2013-09-01

    The aim of this study was to assess the physiological responses to an intensified rugby league competition and explore the relationships between fatigue and match performance. Prospective cohort study. Fifteen junior rugby league players (n=8 forwards, 7 backs; mean±SE, age 16.6±0.2 years; body mass 81.6±3.0kg; and height 178.9±1.8cm) competed in five 40min games over 5 days (two games each on days 1 and 2, one game on day 4, and no games on days 3 and 5). Over the competition, players performed a countermovement jump to assess neuromuscular fatigue, provided a fingertip blood sample to measure blood creatine kinase, and completed a questionnaire to monitor perceived wellbeing; ratings of perceived effort were recorded following each game. Global positioning system and video analysis of each game were used to assess match performance. Over the first 3 days, there were progressive and large increases in neuromuscular fatigue which peaked 12h after game 4 (forwards ES=4.45, p=0.014; backs ES=3.62, p=0.029), and muscle damage which peaked 1h post game 4 (forwards ES=4.45, p=0.004; backs ES=3.94 p=0.012), as well as reductions in perceived wellbeing. These measures gradually recovered over the final 2 days of the competition. Compared to the backs, the forwards experienced greater increases in creatine kinase following game 2 (ES=1.30) and game 4 (ES=1.24) and reductions in perceived wellbeing (ES=0.25-0.46). Match intensity, high-speed running, and repeated-high intensity effort bouts decreased in games 4 and 5 of the competition. Small to large associations were observed between the changes in fatigue, muscle damage and match performance, with significant correlations between creatine kinase and repeated high-intensity effort bout number (r=-0.70, p=0.031) and frequency (r=0.74, p=0.002) and low-speed activity (r=-0.56, p=0.029). Fatigue and muscle damage accumulate over an intensified competition, which is likely to contribute to reductions in high

  6. Performance Analysis of the SIFT Operator for Automatic Feature Extraction and Matching in Photogrammetric Applications

    Directory of Open Access Journals (Sweden)

    Francesco Nex

    2009-05-01

    Full Text Available In the photogrammetry field, interest in region detectors, which are widely used in Computer Vision, is quickly increasing due to the availability of new techniques. Images acquired by Mobile Mapping Technology, Oblique Photogrammetric Cameras or Unmanned Aerial Vehicles do not observe normal acquisition conditions. Feature extraction and matching techniques, which are traditionally used in photogrammetry, are usually inefficient for these applications as they are unable to provide reliable results under extreme geometrical conditions (convergent taking geometry, strong affine transformations, etc. and for bad-textured images. A performance analysis of the SIFT technique in aerial and close-range photogrammetric applications is presented in this paper. The goal is to establish the suitability of the SIFT technique for automatic tie point extraction and approximate DSM (Digital Surface Model generation. First, the performances of the SIFT operator have been compared with those provided by feature extraction and matching techniques used in photogrammetry. All these techniques have been implemented by the authors and validated on aerial and terrestrial images. Moreover, an auto-adaptive version of the SIFT operator has been developed, in order to improve the performances of the SIFT detector in relation to the texture of the images. The Auto-Adaptive SIFT operator (A2 SIFT has been validated on several aerial images, with particular attention to large scale aerial images acquired using mini-UAV systems.

  7. Performance Analysis of the SIFT Operator for Automatic Feature Extraction and Matching in Photogrammetric Applications.

    Science.gov (United States)

    Lingua, Andrea; Marenchino, Davide; Nex, Francesco

    2009-01-01

    In the photogrammetry field, interest in region detectors, which are widely used in Computer Vision, is quickly increasing due to the availability of new techniques. Images acquired by Mobile Mapping Technology, Oblique Photogrammetric Cameras or Unmanned Aerial Vehicles do not observe normal acquisition conditions. Feature extraction and matching techniques, which are traditionally used in photogrammetry, are usually inefficient for these applications as they are unable to provide reliable results under extreme geometrical conditions (convergent taking geometry, strong affine transformations, etc.) and for bad-textured images. A performance analysis of the SIFT technique in aerial and close-range photogrammetric applications is presented in this paper. The goal is to establish the suitability of the SIFT technique for automatic tie point extraction and approximate DSM (Digital Surface Model) generation. First, the performances of the SIFT operator have been compared with those provided by feature extraction and matching techniques used in photogrammetry. All these techniques have been implemented by the authors and validated on aerial and terrestrial images. Moreover, an auto-adaptive version of the SIFT operator has been developed, in order to improve the performances of the SIFT detector in relation to the texture of the images. The Auto-Adaptive SIFT operator (A(2) SIFT) has been validated on several aerial images, with particular attention to large scale aerial images acquired using mini-UAV systems.

  8. Proposal of a Global Training Load Measure Predicting Match Performance in an Elite Team Sport

    Directory of Open Access Journals (Sweden)

    Brendan H. Lazarus

    2017-11-01

    Full Text Available Aim: The use of external and internal load is an important aspect of monitoring systems in team sport. The aim of this study was to validate a novel measure of training load by quantifying the training-performance relationship of elite Australian footballers.Methods: The primary training measure of each of 36 players was weekly load derived from a weighted combination of Global Positioning System (GPS data and perceived wellness over a 24-week season. Smoothed loads representing an exponentially weighted rolling average were derived with decay time constants of 1.5, 2, 3, and 4 weeks. Differential loads representing rate of change in load were generated in similar fashion. Other derived measures of training included monotony, strain and acute:chronic ratio. Performance was a proprietary score derived from match performance indicators. Effects of a 1 SD within-player change below and above the mean of each training measure were quantified with a quadratic mixed model for each position (defenders, forwards, midfielders, and rucks. Effects were interpreted using standardization and magnitude-based inferences.Results: Performance was generally highest near the mean or ~1 SD below the mean of each training measure, and 1 SD increases in the following measures produced small impairments: weekly load (defenders, forwards, and midfielders; 1.5-week smoothed load (midfielders; 4-week differential load (defenders, forwards, and midfielders; and acute:chronic ratio (defenders and forwards. Effects of other measures in other positions were either trivial or unclear.Conclusion: The innovative combination of load was sensitive to performance in this elite Australian football cohort. Periods of high acute load and sustained increases in load impaired match performance. Positional differences should be taken into account for individual training prescription.

  9. Proposal of a Global Training Load Measure Predicting Match Performance in an Elite Team Sport.

    Science.gov (United States)

    Lazarus, Brendan H; Stewart, Andrew M; White, Kevin M; Rowell, Amber E; Esmaeili, Alireza; Hopkins, William G; Aughey, Robert J

    2017-01-01

    Aim: The use of external and internal load is an important aspect of monitoring systems in team sport. The aim of this study was to validate a novel measure of training load by quantifying the training-performance relationship of elite Australian footballers. Methods: The primary training measure of each of 36 players was weekly load derived from a weighted combination of Global Positioning System (GPS) data and perceived wellness over a 24-week season. Smoothed loads representing an exponentially weighted rolling average were derived with decay time constants of 1.5, 2, 3, and 4 weeks. Differential loads representing rate of change in load were generated in similar fashion. Other derived measures of training included monotony, strain and acute:chronic ratio. Performance was a proprietary score derived from match performance indicators. Effects of a 1 SD within-player change below and above the mean of each training measure were quantified with a quadratic mixed model for each position (defenders, forwards, midfielders, and rucks). Effects were interpreted using standardization and magnitude-based inferences. Results: Performance was generally highest near the mean or ~1 SD below the mean of each training measure, and 1 SD increases in the following measures produced small impairments: weekly load (defenders, forwards, and midfielders); 1.5-week smoothed load (midfielders); 4-week differential load (defenders, forwards, and midfielders); and acute:chronic ratio (defenders and forwards). Effects of other measures in other positions were either trivial or unclear. Conclusion: The innovative combination of load was sensitive to performance in this elite Australian football cohort. Periods of high acute load and sustained increases in load impaired match performance. Positional differences should be taken into account for individual training prescription.

  10. Proposal of a Global Training Load Measure Predicting Match Performance in an Elite Team Sport

    Science.gov (United States)

    Lazarus, Brendan H.; Stewart, Andrew M.; White, Kevin M.; Rowell, Amber E.; Esmaeili, Alireza; Hopkins, William G.; Aughey, Robert J.

    2017-01-01

    Aim: The use of external and internal load is an important aspect of monitoring systems in team sport. The aim of this study was to validate a novel measure of training load by quantifying the training-performance relationship of elite Australian footballers. Methods: The primary training measure of each of 36 players was weekly load derived from a weighted combination of Global Positioning System (GPS) data and perceived wellness over a 24-week season. Smoothed loads representing an exponentially weighted rolling average were derived with decay time constants of 1.5, 2, 3, and 4 weeks. Differential loads representing rate of change in load were generated in similar fashion. Other derived measures of training included monotony, strain and acute:chronic ratio. Performance was a proprietary score derived from match performance indicators. Effects of a 1 SD within-player change below and above the mean of each training measure were quantified with a quadratic mixed model for each position (defenders, forwards, midfielders, and rucks). Effects were interpreted using standardization and magnitude-based inferences. Results: Performance was generally highest near the mean or ~1 SD below the mean of each training measure, and 1 SD increases in the following measures produced small impairments: weekly load (defenders, forwards, and midfielders); 1.5-week smoothed load (midfielders); 4-week differential load (defenders, forwards, and midfielders); and acute:chronic ratio (defenders and forwards). Effects of other measures in other positions were either trivial or unclear. Conclusion: The innovative combination of load was sensitive to performance in this elite Australian football cohort. Periods of high acute load and sustained increases in load impaired match performance. Positional differences should be taken into account for individual training prescription. PMID:29209229

  11. Photovoltaic Shading Testbed for Module-Level Power Electronics

    Energy Technology Data Exchange (ETDEWEB)

    Deline, C.; Meydbray, J.; Donovan, M.; Forrest, J.

    2012-05-01

    This document describes a repeatable test procedure that attempts to simulate shading situations, as would be experienced by typical residential rooftop photovoltaic (PV) systems. This type of shading test is particularly useful to evaluate the impact of different power conversion setups, including microinverters, DC power optimizers and string inverters, on overall system performance. The performance results are weighted based on annual estimates of shade to predict annual performance improvement. A trial run of the test procedure was conducted with a side by side comparison of a string inverter with a microinverter, both operating on identical 8kW solar arrays. Considering three different shade weighting conditions, the microinverter was found to increase production by 3.7% under light shading, 7.8% under moderate shading, and 12.3% under heavy shading, relative to the reference string inverter case. Detail is provided in this document to allow duplication of the test method at different test installations and for different power electronics devices.

  12. Appraisal, coping, emotion, and performance during elite fencing matches: a random coefficient regression model approach.

    Science.gov (United States)

    Doron, J; Martinent, G

    2017-09-01

    Understanding more about the stress process is important for the performance of athletes during stressful situations. Grounded in Lazarus's (1991, 1999, 2000) CMRT of emotion, this study tracked longitudinally the relationships between cognitive appraisal, coping, emotions, and performance in nine elite fencers across 14 international matches (representing 619 momentary assessments) using a naturalistic, video-assisted methodology. A series of hierarchical linear modeling analyses were conducted to: (a) explore the relationships between cognitive appraisals (challenge and threat), coping strategies (task- and disengagement oriented coping), emotions (positive and negative) and objective performance; (b) ascertain whether the relationship between appraisal and emotion was mediated by coping; and (c) examine whether the relationship between appraisal and objective performance was mediated by emotion and coping. The results of the random coefficient regression models showed: (a) positive relationships between challenge appraisal, task-oriented coping, positive emotions, and performance, as well as between threat appraisal, disengagement-oriented coping and negative emotions; (b) that disengagement-oriented coping partially mediated the relationship between threat and negative emotions, whereas task-oriented coping partially mediated the relationship between challenge and positive emotions; and (c) that disengagement-oriented coping mediated the relationship between threat and performance, whereas task-oriented coping and positive emotions partially mediated the relationship between challenge and performance. As a whole, this study furthered knowledge during sport performance situations of Lazarus's (1999) claim that these psychological constructs exist within a conceptual unit. Specifically, our findings indicated that the ways these constructs are inter-related influence objective performance within competitive settings. © 2016 John Wiley & Sons A/S. Published by

  13. PowerShades. Transparent photovoltaics and solar shading. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bezzel, E. (PhotoSolar ApS, Taastrup (Denmark)); Univ. of Neuchatel, Institute of Microtechnology, Neuchatel (CH)); Savcor Denmark A/S, Ballerup (Denmark)); Chem-Tec Plating A/S, Uldum (Denmark)); Danish Technological Institute (DTI), Taastrup (Denmark))

    2008-06-15

    This report marks the end of the PSO funded R and D project PowerShades. The objective of the project has been to establish knowledge about the manufacturing of PowerShade transparent photovoltaics and to demonstrate the viability of PowerShade, both as a product and when considered a building element. It has not been the objective to demonstrate a full-scale manufacturing of PowerShade, but to establish the knowledge that enables industrial manufacturing. The overall objective of the project has been achieved, and the large majority of the milestones defined have been met to full extent. It has been shown that PowerShade photovoltaic cells with an electrical efficiency of 5% can be reached, and it is expected that future work will lead to even better efficiency. Also, it has been demonstrated by full size side by side comparison that PowerShade transparent photovoltaics may replace exterior solar shading devices without compromise to the thermal properties of the building. The project has identified a number of work areas that must be addressed before an industrial manufacturing can be established. The efficiency of the photovoltaic generator must be increased and the stability of the entire product documented. Also, some of the identified processing steps must be scaled in capacity before manufacturing can be considered. (author)

  14. Outcome of match related allogeneic stem cell transplantation procedures performed from 2004 till 2011

    Directory of Open Access Journals (Sweden)

    Ali Natasha

    2012-05-01

    Full Text Available Abstract We present our initial experience of allogeneic stem cell transplant procedure performed between April 2004 and August 2011 for various haematological disorders. All patients with non-malignant and malignant haematological disorders with HLA matched donors were selected after pre-transplant workup. Ninety seven patients underwent the procedure. Most common indications for transplant were aplastic anaemia in n = 34 (35%, followed by β-Thalassemia major in n = 21 (21.6% and chronic myeloid leukemia in n = 11 patients (11.3%. Primary graft failure present was present in 2.06%. Incidence of graft versus host disease (GvHD in our patients was 34%. After median follow-up of five years the overall survival was 71.3% with a mean survival time of 51.2 ± 3.3 months.

  15. Performance comparison of liquid desiccant air handling processes from the perspective of match properties

    International Nuclear Information System (INIS)

    Zhang, Tao; Liu, Xiao-Hua; Jiang, Yi

    2013-01-01

    Highlights: • Investigates match properties of heat or mass transfer processes in HPLD system. • Unmatched coefficient based on entransy dissipation is calculated. • A higher unmatched coefficient means a higher transfer resistance. • Process along the iso-concentration line is better than along the isenthalpic line. • The HPLD system heating the solution for regeneration is recommended. - Abstract: The energy consumption of air-conditioning systems represents a large part of the entire building energy consumption in non-residential buildings. Heat pump-driven liquid desiccant (HPLD) systems have become more and more popular because of their high energy efficiency, and there are many different ways to utilize the condensing heat in this type of air handling device. In the present study, the match properties of the heat and mass transfer processes in the air–desiccant system varying with the inlet air states are investigated, and the unmatched coefficient based on entransy dissipation is adopted to evaluate the performance of HPLD systems. It is demonstrated that the unmatched coefficient of the process along the iso-concentration line is much lower than that along the isenthalpic line. A higher unmatched coefficient means a higher heat or mass transfer resistance caused by the unmatched flow rates or parameters. The HPLD system in which solution is heated for regeneration (Basic Type II) performs much better than the system in which regeneration air is heated (Basic Type I). The unmatched coefficients of the condenser and regenerator decrease from 2.70 and 1.34, respectively, in Basic Type I, to 1.07 and 1.05, respectively, in Basic Type II. Moreover, COP sys is significantly improved, rising from 1.83 to 4.17

  16. THE INFLUENCE OF FLUID INGESTION ON PERFORMANCE OF SOCCER PLAYERS DURING A MATCH

    Directory of Open Access Journals (Sweden)

    Julio Tirapegui

    2004-12-01

    Full Text Available The purpose of this study was to verify the effects of a carbohydrate-electrolyte drink on soccer performance. Twenty soccer players volunteered to participate in the study. Players were allocated to two assigned trials according to their positional roles in the team: CHO group (ingesting a 6% carbohydrate-electrolyte solution at regular 15 minutes intervals and NCHO (ingesting no fluid during 75 min on-field soccer game. During the trials, body mass loss, heart rate, time spent running, number of sprints and core temperature were measured. There were statistically significant changes (p < 0.05 in body mass loss (CHO: 1.14 ± 0.37 kg vs. NCHO: 1.75 ± 0.47 kg and number of sprints performed (CHO: 14.70 ± 4.38 vs. NCHO: 10.70 ± 5.80 between groups. The main finding of the present study indicates that supplementation with a carbohydrate-electrolyte drink during a soccer match is beneficial in helping to prevent deterioration in performance.

  17. Defining brain-machine interface applications by matching interface performance with device requirements.

    Science.gov (United States)

    Tonet, Oliver; Marinelli, Martina; Citi, Luca; Rossini, Paolo Maria; Rossini, Luca; Megali, Giuseppe; Dario, Paolo

    2008-01-15

    Interaction with machines is mediated by human-machine interfaces (HMIs). Brain-machine interfaces (BMIs) are a particular class of HMIs and have so far been studied as a communication means for people who have little or no voluntary control of muscle activity. In this context, low-performing interfaces can be considered as prosthetic applications. On the other hand, for able-bodied users, a BMI would only be practical if conceived as an augmenting interface. In this paper, a method is introduced for pointing out effective combinations of interfaces and devices for creating real-world applications. First, devices for domotics, rehabilitation and assistive robotics, and their requirements, in terms of throughput and latency, are described. Second, HMIs are classified and their performance described, still in terms of throughput and latency. Then device requirements are matched with performance of available interfaces. Simple rehabilitation and domotics devices can be easily controlled by means of BMI technology. Prosthetic hands and wheelchairs are suitable applications but do not attain optimal interactivity. Regarding humanoid robotics, the head and the trunk can be controlled by means of BMIs, while other parts require too much throughput. Robotic arms, which have been controlled by means of cortical invasive interfaces in animal studies, could be the next frontier for non-invasive BMIs. Combining smart controllers with BMIs could improve interactivity and boost BMI applications.

  18. Building Applications, Opportunities and Challenges of Active Shading Systems: A State-of-the-Art Review

    Directory of Open Access Journals (Sweden)

    Joud Al Dakheel

    2017-10-01

    Full Text Available Active shading systems in buildings have emerged as a high performing shading solution that selectively and optimally controls daylight and heat gains. Active shading systems are increasingly used in buildings, due to their ability to mainly improve the building environment, reduce energy consumption and in some cases generate energy. They may be categorized into three classes: smart glazing, kinetic shading and integrated renewable energy shading. This paper reviews the current status of the different types in terms of design principle and working mechanism of the systems, performance, control strategies and building applications. Challenges, limitations and future opportunities of the systems are then discussed. The review highlights that despite its high initial cost, the electrochromic (EC glazing is the most applied smart glazing due to the extensive use of glass in buildings under all climatic conditions. In terms of external shadings, the rotating shading type is the predominantly used one in buildings due to its low initial cost. Algae façades and folding shading systems are still emerging types, with high initial and maintenance costs and requiring specialist installers. The algae façade systems and PV integrated shading systems are a promising solution due to their dual benefits of providing shading and generating electricity. Active shading systems were found to save 12 to 50% of the building cooling electricity consumption.

  19. Hormonal Regulation in Shade Avoidance

    Directory of Open Access Journals (Sweden)

    Chuanwei Yang

    2017-09-01

    Full Text Available At high vegetation density, shade-intolerant plants sense a reduction in the red (660 nm to far-red (730 nm light ratio (R/FR in addition to a general reduction in light intensity. These light signals trigger a spectrum of morphological changes manifested by growth of stem-like tissue (hypocotyl, petiole, etc. instead of harvestable organs (leaves, fruits, seeds, etc.—namely, shade avoidance syndrome (SAS. Common phenotypical changes related to SAS are changes in leaf hyponasty, an increase in hypocotyl and internode elongation and extended petioles. Prolonged shade exposure leads to early flowering, less branching, increased susceptibility to insect herbivory, and decreased seed yield. Thus, shade avoidance significantly impacts on agronomic traits. Many genetic and molecular studies have revealed that phytochromes, cryptochromes and UVR8 (UV-B photoreceptor protein monitor the changes in light intensity under shade and regulate the stability or activity of phytochrome-interacting factors (PIFs. PIF-governed modulation of the expression of auxin biosynthesis, transporter and signaling genes is the major driver for shade-induced hypocotyl elongation. Besides auxin, gibberellins, brassinosteroids, and ethylene are also required for shade-induced hypocotyl or petiole elongation growth. In leaves, accumulated auxin stimulates cytokinin oxidase expression to break down cytokinins and inhibit leaf growth. In the young buds, shade light promotes the accumulation of abscisic acid to repress branching. Shade light also represses jasmonate- and salicylic acid-induced defense responses to balance resource allocation between growth and defense. Here we will summarize recent findings relating to such hormonal regulation in SAS in Arabidopsis thaliana, Brassica rapa, and certain crops.

  20. Performance of children with epilepsy and normal age-matched controls on the WISC-III.

    Science.gov (United States)

    O'Leary, Stephanie D; Burns, Thomas G; Borden, Kristine A

    2006-06-01

    Research findings regarding the effects of childhood epilepsy on general intelligence have produced variable results. The aim of this study was to investigate the effects of epilepsy, age of seizure onset, and Antiepileptic Drugs (AED) on intellectual ability as assessed by the Wechsler Intelligence Scale for Children, 3rd Edition (WISC-III; Wechsler, 1991). This study included children with epilepsy assessed with the WISC-III who achieved either a Full Scale, Verbal Scale, or Performance Scale IQ score >or= 70. A clinical sample of children diagnosed with epilepsy (n = 32) were age- and gender-matched with subjects from the normative standardization sample for the WISC-III, yielding a total sample of 64 subjects. Comparison using a MANOVA revealed significant differences across WISC-III Index standard scores (p = 0.0005) and subtest scaled scores (p = 0.0013), with control participants performing better than epileptic participants. Secondary analyses were also conducted considering monotherapy (n = 14) versus polytherapy (n = 11), and age of seizure onset ( years, n = 15). MANOVA comparisons revealed no significant differences between groups across WISC-III Index standard scores.

  1. Conventional QT Variability Measurement vs. Template Matching Techniques: Comparison of Performance Using Simulated and Real ECG

    Science.gov (United States)

    Baumert, Mathias; Starc, Vito; Porta, Alberto

    2012-01-01

    Increased beat-to-beat variability in the QT interval (QTV) of ECG has been associated with increased risk for sudden cardiac death, but its measurement is technically challenging and currently not standardized. The aim of this study was to investigate the performance of commonly used beat-to-beat QT interval measurement algorithms. Three different methods (conventional, template stretching and template time shifting) were subjected to simulated data featuring typical ECG recording issues (broadband noise, baseline wander, amplitude modulation) and real short-term ECG of patients before and after infusion of sotalol, a QT interval prolonging drug. Among the three algorithms, the conventional algorithm was most susceptible to noise whereas the template time shifting algorithm showed superior overall performance on simulated and real ECG. None of the algorithms was able to detect increased beat-to-beat QT interval variability after sotalol infusion despite marked prolongation of the average QT interval. The QTV estimates of all three algorithms were inversely correlated with the amplitude of the T wave. In conclusion, template matching algorithms, in particular the time shifting algorithm, are recommended for beat-to-beat variability measurement of QT interval in body surface ECG. Recording noise, T wave amplitude and the beat-rejection strategy are important factors of QTV measurement and require further investigation. PMID:22860030

  2. Conventional QT variability measurement vs. template matching techniques: comparison of performance using simulated and real ECG.

    Directory of Open Access Journals (Sweden)

    Mathias Baumert

    Full Text Available Increased beat-to-beat variability in the QT interval (QTV of ECG has been associated with increased risk for sudden cardiac death, but its measurement is technically challenging and currently not standardized. The aim of this study was to investigate the performance of commonly used beat-to-beat QT interval measurement algorithms. Three different methods (conventional, template stretching and template time shifting were subjected to simulated data featuring typical ECG recording issues (broadband noise, baseline wander, amplitude modulation and real short-term ECG of patients before and after infusion of sotalol, a QT interval prolonging drug. Among the three algorithms, the conventional algorithm was most susceptible to noise whereas the template time shifting algorithm showed superior overall performance on simulated and real ECG. None of the algorithms was able to detect increased beat-to-beat QT interval variability after sotalol infusion despite marked prolongation of the average QT interval. The QTV estimates of all three algorithms were inversely correlated with the amplitude of the T wave. In conclusion, template matching algorithms, in particular the time shifting algorithm, are recommended for beat-to-beat variability measurement of QT interval in body surface ECG. Recording noise, T wave amplitude and the beat-rejection strategy are important factors of QTV measurement and require further investigation.

  3. Selecting Landscape Plants: Shade Trees

    OpenAIRE

    Relf, Diane; Appleton, Bonnie Lee, 1948-2012; Close, David

    2015-01-01

    Because of the permanency of trees and their importance in the landscape, care must be taken to select the best species for each situation. This publication goes over how to choose landscape trees that are shade tolerant.

  4. Match Performance and Physiological Capacity of Female Elite Team Handball Players

    DEFF Research Database (Denmark)

    Michalsik, L B; Madsen, K; Aagaard, Per

    2014-01-01

    The present study evaluated the physical demands imposed on female elite team handball players in relation to playing position. Female elite team handball field players were examined during match-play over a 5-year period using video based computerized locomotion analysis of tournament matches...

  5. Based on regular expression matching of evaluation of the task performance in WSN: a queue theory approach.

    Science.gov (United States)

    Wang, Jie; Cui, Kai; Zhou, Kuanjiu; Yu, Yanshuo

    2014-01-01

    Due to the limited resources of wireless sensor network, low efficiency of real-time communication scheduling, poor safety defects, and so forth, a queuing performance evaluation approach based on regular expression match is proposed, which is a method that consists of matching preprocessing phase, validation phase, and queuing model of performance evaluation phase. Firstly, the subset of related sequence is generated in preprocessing phase, guiding the validation phase distributed matching. Secondly, in the validation phase, the subset of features clustering, the compressed matching table is more convenient for distributed parallel matching. Finally, based on the queuing model, the sensor networks of task scheduling dynamic performance are evaluated. Experiments show that our approach ensures accurate matching and computational efficiency of more than 70%; it not only effectively detects data packets and access control, but also uses queuing method to determine the parameters of task scheduling in wireless sensor networks. The method for medium scale or large scale distributed wireless node has a good applicability.

  6. Based on Regular Expression Matching of Evaluation of the Task Performance in WSN: A Queue Theory Approach

    Directory of Open Access Journals (Sweden)

    Jie Wang

    2014-01-01

    Full Text Available Due to the limited resources of wireless sensor network, low efficiency of real-time communication scheduling, poor safety defects, and so forth, a queuing performance evaluation approach based on regular expression match is proposed, which is a method that consists of matching preprocessing phase, validation phase, and queuing model of performance evaluation phase. Firstly, the subset of related sequence is generated in preprocessing phase, guiding the validation phase distributed matching. Secondly, in the validation phase, the subset of features clustering, the compressed matching table is more convenient for distributed parallel matching. Finally, based on the queuing model, the sensor networks of task scheduling dynamic performance are evaluated. Experiments show that our approach ensures accurate matching and computational efficiency of more than 70%; it not only effectively detects data packets and access control, but also uses queuing method to determine the parameters of task scheduling in wireless sensor networks. The method for medium scale or large scale distributed wireless node has a good applicability.

  7. Dental Shade Guide Variability for Hues B, C, and D Using Cross-Polarized Photography.

    Science.gov (United States)

    Sampaio, Camila S; Gurrea, Jon; Gurrea, Marta; Bruguera, August; Atria, Pablo J; Janal, Malvin; Bonfante, Estevam A; Coelho, Paulo G; Hirata, Ronaldo

    2018-04-20

    This study evaluated the color variability of hues B, C, and D between the VITA Classical shade guide (Vita Zahnfabrik) and four other VITA-coded ceramic shade guides using a digital camera (Canon EOS 60D) and computer software (Adobe Photoshop CC). A cross-polarizing filter was used to standardize external light sources influencing color match. A total of 275 pictures were taken, 5 per shade tab, for 11 shades (B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, and D4), from the following shade guides: VITA Classical (control); IPS e.max Ceram (Ivoclar Vivadent); IPS d.SIGN (Ivoclar Vivadent); Initial ZI (GC); and Creation CC (Creation Willi Geller). Pictures were evaluated using Adobe Photoshop CC for standardization of hue, chroma, and value between shade tabs. The VITA-coded shade guides evaluated here showed an overall unmatched shade in all their tabs when compared to the control, suggesting that shade selection should be made with the corresponding manufacturer guide of the ceramic intended for the final restoration.

  8. Pre-game perceived wellness highly associates with match running performances during an international field hockey tournament.

    Science.gov (United States)

    Ihsan, Mohammed; Tan, Frankie; Sahrom, Sofyan; Choo, Hui Cheng; Chia, Michael; Aziz, Abdul Rashid

    2017-06-01

    This study examined the associations between pre-game wellness and changes in match running performance normalised to either (i) playing time, (ii) post-match RPE or (iii) both playing time and post-match RPE, over the course of a field hockey tournament. Twelve male hockey players were equipped with global positioning system (GPS) units while competing in an international tournament (six matches over 9 days). The following GPS-derived variables, total distance (TD), low-intensity activity (LIA; 15 km/h), high-intensity accelerations (HIACC; >2 m/s 2 ) and decelerations (HIDEC; >-2 m/s 2 ) were acquired and normalised to either (i) playing time, (ii) post-match RPE or (iii) both playing time and post-match RPE. Each morning, players completed ratings on a 0-10 scale for four variables: fatigue, muscle soreness, mood state and sleep quality, with cumulative scores determined as wellness. Associations between match performances and wellness were analysed using Pearson's correlation coefficient. Combined time and RPE normalisation demonstrated the largest associations with Δwellness compared with time or RPE alone for most variables; TD (r = -0.95; -1.00 to -0.82, p = .004), HIR (r = -0.95; -1.00 to -0.83, p = .003), LIA (r = -0.94; -1.00 to -0.81, p = .026), HIACC (r = -0.87; -1.00 to -0.66, p = .004) and HIDEC (r = -0.90; -0.99 to -0.74, p = .008). These findings support the use of wellness measures as a pre-match tool to assist with managing internal load over the course of a field hockey tournament. Highlights Fixtures during international field hockey tournaments are typically congested and impose high physiological demands on an athlete. To minimise decrements in running performance over the course of a tournament, measures to identify players who have sustained high internal loads are logically warranted. The present study examined the association between changes in simple customised psychometric wellness measures

  9. The influence of contextual factors on running performance in female Australian Football match-play.

    Science.gov (United States)

    Black, Georgia M; Gabbett, Tim J; Naughton, Geraldine; Cole, Michael H; Johnston, Rich D; Dawson, Brian

    2017-07-12

    Given the recent growth of the professional status among multiple female football codes, the aim of this study is to investigate the effects of contextual factors on activity profiles and pacing strategies in female Australian football players. Thirty-five female Australian football players participated in this study. Global positioning system analysis was completed over one competitive season. Matches were separated into eight 10-minute periods. Greater distances were covered during the first half irrespective of playing position (ES = 0.39-0.50, Likelihood ≥90%). Throughout a number of periods half-backs (defensive players) covered greater distances during losses (ES ≥0.74, Likelihood ≥92%) and against Top 3 opponents (ES ≥1.0, Likelihood ≥ 97%). Midfielders and half-backs covered greater distances (ES ≥ 0.49, Likelihood ≥89%) in the final match period in winning compared with losing matches. A reduction in player work-rate is evident during the second half of matches. The influence of contextual factors varied across positional groups. However, it is clear coaches could use player rotation both early in the match in an attempt to delay the effect of fatigue and more frequently during the second half to increase running intensity.

  10. Effects of sports drinks on the maintenance of physical performance during 3 tennis matches: a randomized controlled study.

    Science.gov (United States)

    Brink-Elfegoun, Thibault; Ratel, Sébastien; Leprêtre, Pierre-Marie; Metz, Lore; Ennequin, Gael; Doré, Eric; Martin, Vincent; Bishop, David; Aubineau, Nicolas; Lescuyer, Jean-François; Duclos, Martine; Sirvent, Pascal; Peltier, Sébastien L

    2014-01-01

    Tennis tournaments often involve playing several consecutive matches interspersed with short periods of recovery. The objective of this study was firstly to assess the impact of several successive tennis matches on the physical performance of competitive players and secondly to evaluate the potential of sports drinks to minimize the fatigue induced by repeated matches. This was a crossover, randomized controlled study. Eight male regionally-ranked tennis players participated in this study. Players underwent a series of physical tests to assess their strength, speed, power and endurance following the completion of three tennis matches each of two hours duration played over three consecutive half-days (1.5 day period for each condition). In the first condition the players consumed a sports drink before, during and after each match; in the second, they drank an identical volume of placebo water. The results obtained were compared with the third 'rest' condition in which the subjects did not play any tennis. Main outcomes measured were maximal isometric strength and fatigability of knee and elbow extensors, 20-m sprint speed, jumping height, specific repeated sprint ability test and hand grip strength. The physical test results for the lower limbs showed no significant differences between the three conditions. Conversely, on the upper limbs the EMG data showed greater fatigue of the triceps brachii in the placebo condition compared to the rest condition, while the ingestion of sports drinks attenuated this fatigue. This study has demonstrated for the first time that, when tennis players are adequately hydrated and ingest balanced meals between matches, then no large drop in physical performance is observed even during consecutive competitive matches. ClinicalTrials.gov: NCT01353872.

  11. Assessment of color parameters of composite resin shade guides using digital imaging versus colorimeter.

    Science.gov (United States)

    Yamanel, Kivanc; Caglar, Alper; Özcan, Mutlu; Gulsah, Kamran; Bagis, Bora

    2010-12-01

    This study evaluated the color parameters of resin composite shade guides determined using a colorimeter and digital imaging method. Four composite shade guides, namely: two nanohybrid (Grandio [Voco GmbH, Cuxhaven, Germany]; Premise [KerrHawe SA, Bioggio, Switzerland]) and two hybrid (Charisma [Heraeus Kulzer, GmbH & Co. KG, Hanau, Germany]; Filtek Z250 [3M ESPE, Seefeld, Germany]) were evaluated. Ten shade tabs were selected (A1, A2, A3, A3,5, A4, B1, B2, B3, C2, C3) from each shade guide. CIE Lab values were obtained using digital imaging and a colorimeter (ShadeEye NCC Dental Chroma Meter, Shofu Inc., Kyoto, Japan). The data were analyzed using two-way analysis of variance and Bonferroni post hoc test. Overall, the mean ΔE values from different composite pairs demonstrated statistically significant differences when evaluated with the colorimeter (p 6.8). For all shade pairs evaluated, the most significant shade mismatches were obtained between Grandio-Filtek Z250 (p = 0.021) and Filtek Z250-Premise (p = 0.01) regarding ΔE mean values, whereas the best shade match was between Grandio-Charisma (p = 0.255) regardless of the measurement method. The best color match (mean ΔE values) was recorded for A1, A2, and A3 shade pairs in both methods. When proper object-camera distance, digital camera settings, and suitable illumination conditions are provided, digital imaging method could be used in the assessment of color parameters. Interchanging use of shade guides from different composite systems should be avoided during color selection. © 2010, COPYRIGHT THE AUTHORS. JOURNAL COMPILATION © 2010, WILEY PERIODICALS, INC.

  12. Analysis of physical match performance in English Premier League soccer referees with particular reference to first half and player work rates.

    Science.gov (United States)

    Weston, Matthew; Castagna, Carlo; Impellizzeri, Franco M; Rampinini, Ermanno; Abt, Grant

    2007-12-01

    The aim of the present study was to examine the influence of first half activity, overall match intensity and seasonal variation on the physical match performances of English Premier League football referees. Match analysis data was collected using the Prozone match analysis system from 19 full-time professional referees during a total of 254 matches in the 2004-2005 season. Physical match performances were classified into three separate categories: 1, total distance covered (TD); 2, high-intensity running distance (running speed>5.5m/s, HIR); 3, average distance from infringements (DI). Using these match activity variables the influence of first half TD and HIR distances on second half activities and also the influence of players' match activities upon the referees' physical match performances were examined. The main finding of the present study was that the physical match performances of the referees were partly related to those of the players, in that the referees' HIR correlated with players' HIR (r=0.43, preferees (r=0.47 and r=0.52, respectively, preferee. Further examination is required as to whether reduced physical performances in the second half of matches are a consequence of referee fatigue, tactical strategies on behalf of the referee or reduced player match activities resulting in a slower tempo of match.

  13. The Effects of Game Strategy and Preference-Matching on Flow Experience and Programming Performance in Game-Based Learning

    Science.gov (United States)

    Wang, Li-Chun; Chen, Ming-Puu

    2010-01-01

    Learning to program is difficult for novices, even for those undergraduates who have majored in computer science. The study described in this paper has investigated the effects of game strategy and preference-matching on novice learners' flow experience and performance in learning to program using an experiential gaming activity. One hundred and…

  14. Intertrial Sources of Stimulus Control and Delayed Matching-to-Sample Performance in Humans

    Science.gov (United States)

    Williams, Dean C.; Johnston, Mark D.; Saunders, Kathryn J.

    2006-01-01

    Two experiments compared delayed matching-to-sample (DMTS) accuracy under 2 procedures in adults with mental retardation. In the trial-unique procedure, every trial in a session contained different stimuli. Thus, comparison stimuli that were correct on one trial were never incorrect on other trials in that session (or vice versa). In the 2-sample…

  15. Partial Shade Evaluation of Distributed Power Electronics for Photovoltaic Systems: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Deline, C.; Meydbrav, J.; Donovan, M.

    2012-06-01

    Site survey data for several residential installations are provided, showing the extent and frequency of shade throughout the year. This background information is used to design a representative shading test that is conducted on two side-by-side 8-kW photovoltaic (PV) installations. One system is equipped with a standard string inverter, while the other is equipped with microinverters on each solar panel. Partial shade is applied to both systems in a comprehensive range of shading conditions, simulating one of three shade extents. Under light shading conditions, the microinverter system produced the equivalent of 4% annual performance improvement, relative to the string inverter system. Under moderate shading conditions, the microinverter system outperformed the string inverter system by 8%, and under heavy shading the microinverter increased relative performance by 12%. In all three cases, the percentage of performance loss that is recovered by the use of distributed power electronics is 40%-50%. Additionally, it was found that certain shading conditions can lead to additional losses in string inverters due to peak-power tracking errors and voltage limitations.

  16. Fiber composites combined with matched high strength Cu-Nb microfilament conductors for high performance pulsed magnets

    Energy Technology Data Exchange (ETDEWEB)

    Heremans, G.; Van Bockstal, L.; Liang, L.; Herlach, F. [K.U. Leuven (Belgium). Dept. of Physics; Nikulin, A.; Chikov, A.; Pantsyrny, V.; Vorob`jova, A.; Dergunaova, E. [A.A. Bochvar Inst. of Inorganic Materials, Moscow (Russian Federation)

    1994-07-01

    High performance pulsed magnets for fields in excess of 70 T at a pulse duration of 15 ms are made by combining strong fiber composites with different types of conductor materials. These solenoids are optimized for constant stress throughout the volume. The best results are obtained when the modulus of elasticity of the conductor is matched to that of the fiber composite. To this end, a high strength Cu-Nb microfilament wire has been developed that matches the modulus of an S-glass fiber composite.

  17. Fibre composites combined with matched high strength Cu-Nb microfilament conductors for high performance pulsed magnets

    Science.gov (United States)

    Heremans, Guido; Vanbockstal, Luc; Liang, Li; Herlach, Fritz; Nikulin, A.; Chikov, A.; Pantsyrny, V.; Vorob'jova, A.; Dergunaova, E.; Bochvar, A. A.

    1994-07-01

    High performance pulsed magnets for fields in excess of 70 T at a pulse duration of 15 ms are made by combining strong fiber composites with different types of conductor materials. These solenoids are optimized for constant stress throughout the volume. The best results are obtained when the modulus of elasticity of the conductor is matched to that of the fiber composite. To this end, a high strength Cu-Nb microfilament wire has been developed that matches the modulus of an S-glass fiber composite.

  18. THE EFFICACY OF ANGLE-MATCHED ISOKINETIC KNEE FLEXOR AND EXTENSOR STRENGTH PARAMETERS IN PREDICTING AGILITY TEST PERFORMANCE.

    Science.gov (United States)

    Greig, Matt; Naylor, James

    2017-10-01

    Agility is a fundamental performance element in many sports, but poses a high risk of injury. Hierarchical modelling has shown that eccentric hamstring strength is the primary determinant of agility performance. The purpose of this study was to investigate the relationship between knee flexor and extensor strength parameters and a battery of agility tests. Controlled laboratory study. Nineteen recreational intermittent games players completed an agility battery and isokinetic testing of the eccentric knee flexors (eccH) and concentric knee extensors (conQ) at 60, 180 and 300°·s -1 . Peak torque and the angle at which peak torque occurred were calculated for eccH and conQ at each speed. Dynamic control ratios (eccH:conQ) and fast:slow ratios (300:60) were calculated using peak torque values, and again using angle-matched data, for eccH and conQ. The agility test battery differentiated linear vs directional changes and prescriptive vs reactive tasks. Linear regression showed that eccH parameters were generally a better predictor of agility performance than conQ parameters. Stepwise regression showed that only angle-matched strength ratios contributed to the prediction of each agility test. Trdaitionally calculated strength ratios using peak torque values failed to predict performance. Angle-matched strength parameters were able to account for 80% of the variation in T-test performance, 70% of deceleration distance, 55% of 10m sprint performance, and 44% of reactive change of direction speed. Traditionally calculated strength ratios failed to predict agility performance, whereas angle-matched strength ratios had better predictive ability and featured in a predictive stepwise model for each agility task. 2c.

  19. Academic performance of longitudinal integrated clerkship versus rotation-based clerkship students: a matched-cohort study.

    Science.gov (United States)

    Myhre, Douglas L; Woloschuk, Wayne; Jackson, Wesley; McLaughlin, Kevin

    2014-02-01

    Prior studies suggest that students on a longitudinal integrated clerkship (LIC) have comparable academic performance to those on a rotation-based clerkship (RBC); however, most of these studies did not adjust for preclerkship academic performance. The objective of this study was to compare the academic performance of LIC and RBC students matched on prior academic performance over a three-year period. Each LIC student in the University of Calgary classes of 2009, 2010, and 2011 (n = 34) was matched with four RBC students (n = 136) of similar prior academic performance. Knowledge and clinical skills performance between the streams was compared. Knowledge was evaluated by internal summative examinations and the Medical Council of Canada Part 1 licensing exam. Clinical skills were evaluated via in-training evaluation report (ITERs) and performance on the clerkship objective structured clinical examination (OSCE). Meta-analysis was used to compare knowledge evaluations and clinical performance for all core clerkship disciplines, and pooled effect sizes from the fixed-effect models were reported. Meta-analyses showed no statistically significant heterogeneity. There were no differences between LIC and RBC students on knowledge evaluations (pooled effect size 0.019; 95% confidence interval [-0.155, 0.152], P = .8), ITERs (pooled effect size -0.015 [-0.157, 0.127], P = .8), or mean OSCE ratings (67.9 [SD = 4.6] versus 68.6 [SD = 5.8], P = .5). After matching on prior academic performance, LIC and RBC students at one school had comparable performance on summative evaluations of knowledge, clinical performance, and clinical skills over three years.

  20. Job-Preference and Job-Matching Assessment Results and Their Association with Job Performance and Satisfaction among Young Adults with Developmental Disabilities

    Science.gov (United States)

    Hall, Julie; Morgan, Robert L.; Salzberg, Charles L.

    2014-01-01

    We investigated the effects of preference and degree of match on job performance of four 19 to 20-year-old young adults with developmental disabilities placed in community-based job conditions. We identified high-preference, high-matched and low-preference, low-matched job tasks using a video web-based assessment program. The job matching…

  1. Coping with heat stress during match-play tennis: Does an individualised hydration regimen enhance performance and recovery?

    Science.gov (United States)

    Périard, Julien D; Racinais, Sebastien; Knez, Wade L; Herrera, Christopher P; Christian, Ryan J; Girard, Olivier

    2014-01-01

    Objectives To determine whether an individualised hydration regimen reduces thermal, physiological and perceptual strain during match-play tennis in the heat, and minimises alterations in neuromuscular function and physical performance postmatch and into recovery. Methods 10 men undertook two matches for an effective playing time (ball in play) of 20 min (∼113 min) in ∼37°C and ∼33% RH conditions. Participants consumed fluids ad libitum during the first match (HOT) and followed a hydration regimen (HYD) in the second match based on undertaking play euhydrated, standardising sodium intake and minimising body mass losses. Results HYD improved prematch urine specific gravity (1.013±0.006 vs 1.021±0.009 g/mL; p<0.05). Body mass losses (∼0.3%), fluid intake (∼2 L/h) and sweat rates (∼1.6 L/h) were similar between conditions. Core temperature was higher during the first 10 min of effective play in HOT (p<0.05), but increased similarly (∼39.3°C) on match completion. Heart rate was higher (∼11 bpm) throughout HOT (p<0.001). Thermal sensation was higher during the first 7.5 min of effective play in HOT (p<0.05). Postmatch knee extensor and plantar flexor strength losses, along with reductions in 15 m sprint time and repeated-sprint ability (p<0.05), were similar in both conditions, and were restored within 24 h. Conclusions Both the hydration regimen and ad libitum fluid consumption allowed for minimal body mass losses (<1%). However, undertaking match-play in a euhydrated state attenuated thermal, physiological and perceptual strain. Maximal voluntary strength in the lower limbs and repeated-sprint ability deteriorated similarly in both conditions, but were restored within 24 h. PMID:24668383

  2. Impact of a competition with two consecutive matches in a day on physical performance in young tennis players.

    Science.gov (United States)

    Gallo-Salazar, Cesar; Del Coso, Juan; Barbado, David; Lopez-Valenciano, Alejandro; Santos-Rosa, Francisco Javier; Sanz-Rivas, David; Moya, Manuel; Fernandez-Fernandez, Jaime

    2017-07-01

    The purpose of this study was to analyze the effects of playing 2 tennis matches on the same day on physical performance in young tennis players. Twelve well-trained young tennis players took part in a simulated tennis competition consisting of 2 tennis matches on the same day (morning and afternoon sessions). Before and the day after the competition, physical performance was measured using a battery of countermovement jumps; a 10 m sprint; the 5-0-5 agility test; hip, grip and shoulder maximal isometric strength; shoulder range of motion; and a serve velocity test. Postcompetition results showed reduced performance in 10 m (-3.3%, effect size (ES) = small), dominant and nondominant 5-0-5 agility test (-4.6%, ES = moderate; -4.2%, ES = moderate, respectively), bilateral (-5.2%, ES = small), and unilateral countermovement jumps (dominant leg: -7.2%, ES = small; non-dominant leg: -9.1%, ES = small). Both dominant and nondominant shoulder external rotation range of motion increased (12.2%, ES = moderate; 5.6%, ES = small), whereas internal rotation decreased (-4.2%, ES = small; -3.3%, ES = small) in the postcompetition tests, together with the dominant shoulder external rotation (-10.7%, ES = moderate) and internal rotation (-9.3%, ES = small) strength. Physical impairments occurred in neuromuscular performance variables involving lower (e.g., jumping, sprinting, and change of direction) and upper (e.g., isometric strength and range of motion) limbs the day after playing a competition with 2 consecutive matches on the same day. These alterations in neuromuscular and sport-specific performance need to be taken into consideration when planning tournament schedules for young tennis players, as well as preparing match and recovery strategies.

  3. Application of Convolution Perfectly Matched Layer in MRTD scattering model for non-spherical aerosol particles and its performance analysis

    Science.gov (United States)

    Hu, Shuai; Gao, Taichang; Li, Hao; Yang, Bo; Jiang, Zidong; Liu, Lei; Chen, Ming

    2017-10-01

    The performance of absorbing boundary condition (ABC) is an important factor influencing the simulation accuracy of MRTD (Multi-Resolution Time-Domain) scattering model for non-spherical aerosol particles. To this end, the Convolution Perfectly Matched Layer (CPML), an excellent ABC in FDTD scheme, is generalized and applied to the MRTD scattering model developed by our team. In this model, the time domain is discretized by exponential differential scheme, and the discretization of space domain is implemented by Galerkin principle. To evaluate the performance of CPML, its simulation results are compared with those of BPML (Berenger's Perfectly Matched Layer) and ADE-PML (Perfectly Matched Layer with Auxiliary Differential Equation) for spherical and non-spherical particles, and their simulation errors are analyzed as well. The simulation results show that, for scattering phase matrices, the performance of CPML is better than that of BPML; the computational accuracy of CPML is comparable to that of ADE-PML on the whole, but at scattering angles where phase matrix elements fluctuate sharply, the performance of CPML is slightly better than that of ADE-PML. After orientation averaging process, the differences among the results of different ABCs are reduced to some extent. It also can be found that ABCs have a much weaker influence on integral scattering parameters (such as extinction and absorption efficiencies) than scattering phase matrices, this phenomenon can be explained by the error averaging process in the numerical volume integration.

  4. Variations of L*a*b* values among Vitapan Classical Shade Guides.

    Science.gov (United States)

    King, Kenneth A; deRijk, Waldemar G

    2007-01-01

    To measure the variations in L*a*b* values of a group of 25 guides and to assess whether shade guides are indeed interchangeable. The L*a*b* values of individual shade tabs were measured with a LabScan(tm) XE scanning spectrocolorimeter (SSC) with a special attachment for reproducibly positioning shade tabs. Each shade guide (Vitapan Classical, Vident) contained 16 shade tabs. Absolute calibration of the SSC was performed with color tiles traceable to NIST. One shade guide was used to determine the reproducibility of the experimental method by measuring and then removing each shade tab of the standard 10 times. This assessed the variations in observed values induced by the measurement method and the geometry of the specimens. The entire sample consisted of 25 shade guides. The tabs of each of the 25 shade guides were read five times in the SSC, without moving the specimen. Measurements and calculations of E, L*, a*, and b* were performed using Universal Software V4.10 (Hunter Associates Laboratory). The mean, standard deviation, and range were determined of the E, L*, a*, and b* values for each one of the 16 shades in the shade guides. Differences in color are expressed as DeltaE in color science. The standard deviation of E (E(sd)) and the range of E (E(r)) for each of the shades were used as a DeltaE value to assess color differences. For the reproducibility measurements, the shades had values for E(r) varying from 0.08 to 0.69, and E(sd) between 0.02 and 0.22. This established the detection limit for our method for each of the shades. For the group of 25 shade guides, E(r) varied from 0.75 to 3.05, and E(sd) from 0.22 to 0.54. The difference in value of E(r) obtained from the reproducibility test and the E(r) of the group of 25 guides is significant at p < 0.05. The same was found for E(sd). The largest reproducible E(r) observed was 3.05 for shade C1. The differences observed between shade guides are larger than the variations induced by the experimental method

  5. Esthetics and shade communication: a practical approach.

    Science.gov (United States)

    Hegenbarth, Ernst A

    2006-01-01

    Accurate shade analysis and communication represent one of the biggest challenges in restorative and esthetic dentistry today, especially in light of the rapidly increasing array of ceramic materials available. Traditional methods of shade analysis have relied upon the use of conventional shade guides or, more recently, digital shade measurement. In this article, the author examines the advantages and disadvantages of traditional shade analysis; reviews principles for optimizing the evaluation process, including information regarding the scientific basis of general color science, optics, and aspects of material science; and proposes a six-step approach to shade analysis in which less emphasis is placed on shade guide samples in favor of natural internal structures and surface properties and their replication in different dentin, enamel, transparent, and colored translucent, as well as fluorescent and opalescent, ceramics.

  6. Yield modelling for micro inverter, power optimizer and string inverter under clear and partially shading shaded conditions

    NARCIS (Netherlands)

    Sinapis, K.; Tzikas, C.; Litjens, G.B.M.A.; Donker, van den, M.; Folkert, W.; van Sark, W.G.J.H.M.; Smets, A.

    2015-01-01

    Building Integrated and Building Attached Photovoltaic (BIPV, BAPV) systems may suffer from lower performance than predicted as a result of unwanted partial shading. New system architectures have been proposed to optimize performance. The common approach of these new architectures is to track the

  7. Shade distribution of commercial resin composites and color difference with shade guide tabs.

    Science.gov (United States)

    Park, Seung-Kook; Lee, Yong-Keun

    2007-10-01

    To determine the shade distribution of varied shades of contemporary resin composites, and to measure the color difference (deltaE*ab) between individual shades of resin composites and the nearest shade tabs, which showed the smallest color difference with each shade of resin composite, in the VITA shade guide. Eight light-curing resin composites, with a total of 41 shades, were studied. Color of specimens was measured on a reflection spectrophotometer over a white background. Ranges and distributions of CIE L*, C*ab, a* and b* values of each brand of resin composites were determined. Color difference between each shade of resin composites and each shade of the shade guide tabs were calculated, and the nearest shade guide tab was selected. The range of CIE L* value for eight brands of resin composites was 3.2-9.0, that of C*ab was 2.5-11.6, that of CIE a* value was 1.1-5.8, and that of CIE b* value was 5.9-11.5. Color differences (deltaE*ab) between each shade of resin composites and the nearest shade tab of the shade guide was 0.9-12.8.

  8. INITIAL DEVELOPMENT OF AÇAÍ PLANTS UNDER SHADE GRADATION

    Directory of Open Access Journals (Sweden)

    ELEANDRO CANDIDO DAPONT

    2016-01-01

    Full Text Available ABSTRACT In order to evaluate the effect of different levels of shading on açai (Euterpe oleracea Mart. plants development, an experiment was conducted at the nursery of Floresta, Rio Branco, AC. The experiment was arranged in a completely randomized design with six treatments and four replications of 25 plants, set as full sunlight and 18%, 35%, 50%, 70%, and 80% shading. The evaluation occurred 125 days after transplantation and the variables were stem diameter, root length, length of the aerial part, total length, dry matter of root, dry matter of aerial part, and total dry matter. With exception of root length, there was significant difference between treatments for all variables. The production of açai plants should be performed using 40% shading.

  9. Shade evaluation of ceramic laminates according to different try-in materials.

    Science.gov (United States)

    Lopes, Lawrence Gonzaga; Vaz, Maysa Magalhaes; de Magalhaes, Ana Paula Rodrigues; Cardoso, Paula Carvalho; de Souza, Joao Batista; de Torres, Erica Miranda

    2014-01-01

    The porcelain laminate replaces the visible portion of enamel with a ceramic, which is attached to the dental surface. To enhance cosmetic results, a preliminary color matching procedure is performed prior to cementing the veneers. This procedure can be performed using water, water-soluble gel, or try-in paste. The different shades of cement and try-in pastes are intended to obtain better color and esthetics of the final restoration. This study sought to evaluate the shade of ceramic veneers produced by different try-in materials. Forty bovine teeth and 40 ceramic discs (0.6 mm thick) were prepared. The samples were divided into 4 groups (n = 10). For Group 1 samples, no material was used between the tooth and the ceramic, Group 2 interposed samples with water, Group 3 used a water-soluble gel, and Group 4 used try-in paste (value 0). The color was measured with a spectrophotometer, obtaining L*, a*, and b* values to calculate the color difference (ΔE*). The data were subjected to normality tests and 1-way ANOVA. No significant statistical differences were found among the groups, indicating that the different try-in materials had similar effects on the color of the ceramic laminates.

  10. Repeated Sprint Performance in Male and Female College Athletes Matched for VO2max Relative to Fat Free Mass.

    Science.gov (United States)

    Mageean, Amanda L; Alexander, Ryan P; Mier, Constance M

    The purpose of this study was to examine gender differences in repeated sprint exercise (RSE) performance among male and female athletes matched for VO 2 max relative to FFM (VO 2 max FFM). Thirty nine male and female college athletes performed a graded exercise test for VO 2 max and hydrostatic weighing to determine FFM. From the results, 11 pairs of males and females matched for VO 2 max FFM (mean ± SD ; 58.3 ± 4.3 and 58.9 ± 4.6 ml·kg FFM -1 ·min -1 ; men and women, respectively) were identified. On a separate day, matched participants performed a RSE protocol that consisted of five 6-sec cycle sprints with 30-sec recovery periods, followed by 5-min active recovery and a 30-sec all-out sprint. Repeated 6-sec sprint performance did not differ between men and women; both maintained power output (PO) until sprint 4. PO FFM (W·kg -1 FFM) did not differ between men and women during the five sprints. During the 30-sec sprint, men achieved a lower peak PO FFM than women (11.7 ± 1.5 vs 13.2 ± 1.2); however, the decline in PO FFM over 30 sec was greater in women. VO 2 (ml·kg FFM -1 ·min -1 ) was lower in men during recovery (24.4 ± 3.8 vs 28.7 ± 5.7) and at the beginning (29.2 ± 4.0 vs 34.7 ± 4.9) and end (49.4 ± 5.0 vs 52.3 ± 4.0). of the 30-sec sprint. These data indicate that men and women with similar aerobic capacities do not respond differently to short repeated sprints but may differ in their ability to recover and perform sprints of longer duration.

  11. Color Parameters of the Chromascop Shade Guide

    Directory of Open Access Journals (Sweden)

    William J. O'Brien

    2012-12-01

    Full Text Available The purposes of this study are: (1 determine the color of the twenty shades in the Ivoclar’s Chromascop shade guide, (2 determine the color representation of the shade guide described as coverage error (CE, and (3 compare this shade guide with the Vita Classical and Bioform shade guides. The spectral data was collected using Beckman model DU reflectance spectrophotometer equipped with an integrating sphere. Commission International de l’Eclairage (CIE chromaticity coordinates were calculated using CIE illuminant C and 1931 observer data, then converted to CIE L*a*b* and Munsell notation. Each shade was spectrophotometrically compared to the published colors of 335 human teeth. The minimum CIE L*a*b* color difference was calculated for each tooth and the average of these color differences was defined as the CE. The measured colors of the Chromascop guide had a CIE L* range of 79.67 to 65.61, an a* range of -0.71 to 3.85, and a b* range of 14.58 to 27.69. The average CE of the Chromascop shade guide was 3.38. The Chromascop shade guide has similar colors and a CE compared with the Bioform and Vita Classical shade guides, but with some shades of higher red and yellow components.

  12. Squad management, injury and match performance in a professional soccer team over a championship-winning season.

    Science.gov (United States)

    Carling, Christopher; Le Gall, Franck; McCall, Alan; Nédélec, Mathieu; Dupont, Gregory

    2015-01-01

    Squad management, injury and physical, tactical and technical match performance were investigated in a professional soccer team across five consecutive league seasons (2008-2013, 190 league games) with specific focus on a championship-winning season (2010/11). For each player, match participation and time-loss injuries were recorded, the latter prospectively diagnosed by the team's physician. Defending and attacking tactical and technical performance indicators investigated included ball possession and possession in opponents' half, passes, forward passes, completed passes and forward passes, crosses and completed crosses, goal attempts and goal attempts on target, successful final third entries, free-kicks and 50/50 duels won/lost. Physical performance measures included total distance and distance covered at high-speeds (≥19.1 km/h). Results showed that during the 2010/11 season, squad utilisation was lowest potentially owing to the observed lower match injury occurrence and working days lost to injury thereby increasing player availability. In 2010/11, the team won both its highest number of points and conceded its lowest number of goals especially over the second half of this season. The team also won its highest number of games directly via a goal from a substitute and scored and conceded a goal first on the highest and lowest number of occasions, respectively. While multivariate analysis of variance (MANOVA) detected a significant difference in some attacking and defensive performance indicators across the five seasons, these were generally not distinguishing factors in 2010/11. Similarly, univariate ANOVAs showed a significant difference in running distances covered across seasons, but the trend was for less activity in 2010/11.

  13. Sombra artificial e método de fornecimento de concentrado no comportamento e desempenho de bezerros desmamados =Artificial shade and method of concentrate supply in behavior and in performance of calves.

    Directory of Open Access Journals (Sweden)

    Geraldo Tadeus dos Santos

    2011-10-01

    Full Text Available Foram avaliados o comportamento, as variáveis fisiológicas e o desempenho de bezerros Holandês e mestiços desmamados em diferentes telas de polipropileno e horas de fornecimento de concentrado. Utilizaram-se 24 bezerros, nove da raça Holandesa (H e 15 mestiços de Holandês (MH, em piquetes parcialmente cobertos com tela de polipropileno com malha de 70 (S70 e 40% (S40 de sombra, recebendo concentrado em três horários: manhã (M, tarde (T e dias alternados (DA. Os comportamentos comendo e ruminando deitado foram, respectivamente, mais frequentes no ambiente S70 (34,29 e 11,40% do que no ambiente S40 (30,18 e 6,76%, indicando maior conforto térmico. Os comportamentos ruminando em pé e em pé foram, respectivamente, mais frequentes no ambiente S40 (6,42 e 40,25% do que no ambiente S70 (5,24 e 31,18%. A temperatura da superfície do pelame apresentou maior valor no ambiente S40 para os animais H (33,87ºC e MH (33,69ºC, principalmente nas horas mais quentes do dia, quando a radiação solar era maior. A frequência respiratória foi maior para os animais H tanto no ambiente S40 (55,66 mov. min.-1 quanto no ambiente S70 (60,98 mov. min.-1. O ganho de peso médio diário não variou conforme o fornecimento de ração, de sombra e entre grupos genéticos.It was evaluated the behavior, the physiological variables and the performance of Holstein calves and crossbred calves weaned using different shade screens and hours of concentrate supplying. There were used nine Holstein calves (H and 15 crossbred Holstein calves (MH, housed on partially covered paddocks with a polypropylene screen (shade with a loop of 70% of shadow (S70 and 40% (S40 receiving concentrate at three times: morning (M, afternoon (A and alternate days (AD. The behaviors eating and ruminating lying were, respectively, more frequent on the environment S70 (34.29 and 11.40% than on the environment S40 (30.18 and 6.76%, showing greater termical comfort for calves. The behaviors

  14. Enhanced Absorption Performance of Carbon Nanostructure Based Metamaterials and Tuning Impedance Matching Behavior by an External AC Electric Field.

    Science.gov (United States)

    Gholipur, Reza; Khorshidi, Zahra; Bahari, Ali

    2017-04-12

    Metamaterials have surprisingly broadened the range of available practical applications in new devices such as shielding, microwave absorbing, and novel antennas. More research has been conducted related to tuning DNG frequency bands of ordered or disordered metamaterials, and far less research has focused on the importance of impedance matching behavior, with little effort and attention given to adjusting the magnitude of negative permittivity values. This is particularly important if devices deal with low-amplitude signals such as radio or TV antennas. The carbon/hafnium nickel oxide (C/Hf 0.9 Ni 0.1 O y ) nanocomposites with simultaneously negative permittivity and negative permeability, excellent metamaterial performance, and good impedance matching could become an efficient alternative for the ordered metamaterials in wave-transparent, microwave absorbing, and solar energy harvesting fields. In this study, we prepared C/Hf 0.9 Ni 0.1 O y nanocomposites by the solvothermal method, and we clarified how the impedance matching and double-negative (DNG) behaviors of C/Hf 0.9 Ni 0.1 O y can be tuned by an external AC electric field created by an electric quadrupole system. An external electric field allows for the alignment of the well-dispersed nanoparticles of carbon with long-range orientations order. We believe that this finding broadens our understanding of moderate conductive material-based random metamaterials (MCMRMs) and provides a novel strategy for replacing high-loss ordered or disordered metamaterials with MCMRMs.

  15. Matching theory

    CERN Document Server

    Plummer, MD

    1986-01-01

    This study of matching theory deals with bipartite matching, network flows, and presents fundamental results for the non-bipartite case. It goes on to study elementary bipartite graphs and elementary graphs in general. Further discussed are 2-matchings, general matching problems as linear programs, the Edmonds Matching Algorithm (and other algorithmic approaches), f-factors and vertex packing.

  16. MODELLING AND CONTROL OF PARTIALLY SHADED PHOTOVOLTAIC ARRAYS

    Directory of Open Access Journals (Sweden)

    Chia Seet Chin

    2013-01-01

    Full Text Available The photovoltaic (PV array controlled by Maximum Power Point Tracking (MPPT method for optimum PV power generation, particularly when the PV array is under partially shaded condition is presented in this paper. The system modelling is carried out in MATLAB-SIMULINK where the PV array is formed by five series connected identical PV modules. Under uniform solar irradiance conditions, the PV module and the PV array present nonlinear P-V characteristic but the maximum power point (MPP can be easily identified. However, when the PV array is under shaded conditions, the P-V characteristic becomes more complex with the present of multiple MPP. While the PV array operated at local MPP, the generated power is limited. Thus, the investigation on MPPT approach is carried out to maximize the PV generated power even when the PV array is under partially shaded conditions (PSC. Fuzzy logic is adopted into the conventional MPPT to form fuzzy logic based MPPT (FMPPT for better performance. The developed MPPT and FMPPT are compared, particularly the performances on the transient response and the steady state response when the array is under various shaded conditions. FMPPT shows better performance where the simulation results demonstrate FMPPT is able to facilitate the PV array to reach the MPP faster while it helps the PV array to produce a more stable output power.

  17. Performance on Middle School Geometry Problems with Geometry Clues Matched to Three Different Cognitive Styles

    Science.gov (United States)

    Anderson, Karen L.; Casey, M. Beth; Thompson, William L.; Burrage, Marie S.; Pezaris, Elizabeth; Kosslyn, Stephen M.

    2008-01-01

    This study investigated the relationship between 3 ability-based cognitive styles (verbal deductive, spatial imagery, and object imagery) and performance on geometry problems that provided different types of clues. The purpose was to determine whether students with a specific cognitive style outperformed other students, when the geometry problems…

  18. Hedonic value and crowdfunding project performance: a propensity score matching-based analysis

    NARCIS (Netherlands)

    Zhao, L.; Vinig, T.

    2017-01-01

    Purpose In the existing literature on crowdfunding project performance, previous studies have given little attention to the impact of investors’ hedonic value and utilitarian value on project results. In a crowdfunding setting, utilitarian value is somehow hard to satisfy due to information

  19. Similarity Digest Search: A Survey and Comparative Analysis of Strategies to Perform Known File Filtering Using Approximate Matching

    Directory of Open Access Journals (Sweden)

    Vitor Hugo Galhardo Moia

    2017-01-01

    Full Text Available Digital forensics is a branch of Computer Science aiming at investigating and analyzing electronic devices in the search for crime evidence. There are several ways to perform this search. Known File Filter (KFF is one of them, where a list of interest objects is used to reduce/separate data for analysis. Holding a database of hashes of such objects, the examiner performs lookups for matches against the target device. However, due to limitations over hash functions (inability to detect similar objects, new methods have been designed, called approximate matching. This sort of function has interesting characteristics for KFF investigations but suffers mainly from high costs when dealing with huge data sets, as the search is usually done by brute force. To mitigate this problem, strategies have been developed to better perform lookups. In this paper, we present the state of the art of similarity digest search strategies, along with a detailed comparison involving several aspects, as time complexity, memory requirement, and search precision. Our results show that none of the approaches address at least these main aspects. Finally, we discuss future directions and present requirements for a new strategy aiming to fulfill current limitations.

  20. Metabolomic analysis using ultra-performance liquid chromatography-quadrupole-time of flight mass spectrometry (UPLC-Q-TOF MS uncovers the effects of light intensity and temperature under shading treatments on the metabolites in tea.

    Directory of Open Access Journals (Sweden)

    Qunfeng Zhang

    Full Text Available To investigate the effect of light intensity and temperature on the biosynthesis and accumulation of quality-related metabolites, field grown tea plants were shaded by Black Net and Nano-insulating Film (with additional 2-4°C cooling effect with un-shaded plants as a control. Young shoots were subjected to UPLC-Q-TOF MS followed by multivariate statistical analysis. Most flavonoid metabolites (mainly flavan-3-ols, flavonols and their glycosides decreased significantly in the shading treatments, while the contents of chlorophyll, β-carotene, neoxanthin and free amino acids, caffeine, benzoic acid derivatives and phenylpropanoids increased. Comparison between two shading treatments indicated that the lower temperature under Nano shading decreased flavonols and their glycosides but increased accumulation of flavan-3-ols and proanthocyanidins. The comparison also showed a greater effect of temperature on galloylation of catechins than light intensity. Taken together, there might be competition for substrates between the up- and down-stream branches of the phenylpropanoid/flavonoid pathway, which was influenced by light intensity and temperature.

  1. Match activities of elite women soccer players at different performance levels

    DEFF Research Database (Denmark)

    Mohr, Magni; Krustrup, Peter; Andersson, Helena

    2008-01-01

    intensity running in the final 15 minutes compared with the first four 15-minutes intervals, whereas the high-level group performed less (P high-intensity running in the last 15 minutes of each half in comparison with the 2 previous 15-minute periods in the respective half. Peak distance covered...... by high intensity running in a 5-minute interval was 33% longer (P high-level players. In the following 5 minutes immediately after the peak interval top-class players covered 17% less (P high-intensity running than the game average. Defenders performed...... fewer (P intervals of high-intensity running than midfielders and attackers, as well as fewer (P intervals of high-intensity running than elite players at a lower level...

  2. The impact of bullying on educational performance in Ghana: A Bias-reducing Matching Approach

    OpenAIRE

    Kibriya, Shahriar; Xu, Zhicheng P.; Zhang, Yu

    2015-01-01

    School bullying is a serious problem in academic settings all over the world. Using data from Ghana through the Trends in International Mathematics and Science Study we show that bullying has a negative effect on academic performance. We also find evidence that female students are more affected by bullying. However, our analysis of the data reveals a female teacher in the classroom diminishes the negative effect of bullying on female students. The analysis uses a quasi-experimental propensity...

  3. Circadian variation and soccer performance: implications for training and match-play during Ramadan.

    Science.gov (United States)

    Drust, B; Ahmed, Q; Roky, R

    2012-01-01

    Ramadan results in a number of behavioural alterations in individuals when compared to their normal habits outside of this holy month. These changes in behaviour could impact upon the effectiveness of the activity of an elite athlete who has high daily activity levels and energy expenditures. Understanding the true impact of Ramadan on human physiology will also require an awareness of the key aspects of circadian rhythms. This article will present theoretical background content on circadian rhythms along with data on the potential influence of circadian variation on soccer performance. It will also attempt to provide an insight into the problems of partial sleep deprivation and travel for the elite player. The contents will suggest that there is a basis for the within-day variation in physiological and psychological function to impact soccer performance if games are played early in the day or very late at night. As competitive fixtures are uncommon at these times these influences may be more relevant to the timing and organisation of training sessions. It is also likely that a lack of sleep and excessive travel will provide conditions that are not conducive to optimal performance. This would indicate that teams should think carefully about their preparation strategies for important tournaments and games.

  4. External shading devices for energy efficient building

    Science.gov (United States)

    Shahdan, M. S.; Ahmad, S. S.; Hussin, M. A.

    2018-02-01

    External shading devices on a building façade is an important passive design strategy as they reduce solar radiation. Although studies have proven the benefits of external shading devices, many are designed solely for aesthetic purposes without fully considering its high potential to reduce solar radiation and glare. Furthermore, explorations into shading devices by the design team are mostly left too late in the design development phases. Hence, the paper looks into the effectiveness of external shading devices on a building towards more energy efficient building. The study aims to analyse the effects of various configurations of external shading devices towards the energy consumption of a case study building based on computer simulations. This study uses Building Information Modelling (BIM) through Autodesk Revit software as simulation tool. The constant variables for the simulation are the orientation of the building, types of glazing used by the building and the internal loads of the building. Whereas, the manipulated variable is the types of shading device used. The data were sorted according to the categories and translated into a chart. Analysis of the findings indicate that shading devices with different configurations show significant results in the energy consumption and the best configuration is the egg-crate shading devices. The study recommends that the consideration for shading device as a passive design strategy needs to be developed at the early stage of the building design.

  5. Resin-composite cytotoxicity varies with shade and irradiance.

    Science.gov (United States)

    Sigusch, Bernd W; Pflaum, Torsten; Völpel, Andrea; Gretsch, Kerstin; Hoy, Sandra; Watts, David C; Jandt, Klaus D

    2012-03-01

    The study was aimed at investigating the cytotoxicity of different composites as a function of composite shade and the light curing unit (LCU) employed. Non-polymerized and polymerized samples of the composites Grandio(®) (VOCO, Cuxhaven), Solitaire(®) (Heraeus Kulzer, Hanau) and Filtek Z 250(®) (3M/Espe, Seefeld) in two markedly differing shades (A2, C2) were prepared. Polymerization was performed with two LCUs: Heliolux II (Ivoclar/Vivadent, Ellwangen) and Swiss Master Light (EMS, Nyon, Switzerland). To obtain composite extracts, the samples were immersed in cell culture medium (DMEM--Dulbecco's Modified Eagle Medium), which was replaced daily up to the 7th day of the experiment, and then on the 14th, 21st and 28th day. After incubation of human gingival fibroblasts (HGF) with the extracts obtained, cytotoxicity was determined using the MTT test. With the non-polymerized samples, essentially no influence of the composite shades investigated on HGF viability was detected, with the exception of the Solitaire material, where a higher cytotoxicity of the shade C2 in the non-polymerized state was found at the end of the observation period. After polymerization of the different composites, the cytotoxic reaction observed for the extracts of shade C2 was stronger than that observed for A2. After polymerization with the Heliolux II (HLX) LCU, the extracts of composites Grandio and Solitaire C2 were significantly more toxic than those of the A2 shade (pGrandio composite showed the least cytotoxic effect throughout the observation period, irrespective of the LCU used. For the extracts of the Z250 specimens, the cytotoxicity observed was generally higher. The results show that the shade of the composite has an influence on its cytotoxicity and that this cytotoxicity is also influenced by the light curing unit used. It was observed that composites of the darker shade (C2) had a higher cytotoxicity, which varied with the LCU employed. Copyright © 2011 Academy of Dental

  6. Effect of intra- and interspecific competition on the performance of native and invasive species of Impatiens under varying levels of shade and moisture.

    Science.gov (United States)

    Skálová, Hana; Jarošík, Vojtěch; Dvořáčková, Śárka; Pyšek, Petr

    2013-01-01

    Many alien plants are thought to be invasive because of unique traits and greater phenotypic plasticity relative to resident species. However, many studies of invasive species are unable to quantify the importance of particular traits and phenotypic plasticity in conferring invasive behavior because traits used in comparative studies are often measured in a single environment and by using plants from a single population. To obtain a deeper insight into the role of environmental factors, local differences and competition in plant invasions, we compared species of Impatiens (Balsaminaceae) of different origin and invasion status that occur in central Europe: native I. noli-tangere and three alien species (highly invasive I. glandulifera, less invasive I. parviflora and potentially invasive I. capensis). In two experiments we harvested late-stage reproductive plants to estimate performance. The first experiment quantified how populations differed in performance under varying light and moisture levels in the absence of competition. The second experiment quantified performance across these environments in the presence of intra- and inter-specific competition. The highly invasive I. glandulifera was the strongest competitor, was the tallest and produced the greatest biomass. Small size and high plasticity were characteristic for I. parviflora. This species appeared to be the second strongest competitor, especially under low soil moisture. The performance of I. capensis was within the range of the other Impatiens species studied, but sometimes limited by alien competitors. Our results suggest that invasion success within the genus Impatiens depends on the ability to grow large under a range of environmental conditions, including competition. The invasive species also exhibited greater phenotypic plasticity across environmental conditions than the native species. Finally, the decreased performance of the native I. noli-tangere in competition with other species studied

  7. Neural markers for immediate performance accuracy in a Stroop color-word matching task: an event-related potentials analysis.

    Science.gov (United States)

    Shou, Guofa; Ding, Lei

    2014-01-01

    The present study examined the neural markers measured in event-related potentials (ERPs) for immediate performance accuracy during a cognitive task with less conflict, i.e., a Stroop color-word matching task, in which participants were required to judge the congruency of two feature dimensions of a stimulus. In an effort to make ERP components more specific to distinct underlying neural substrates, recorded EEG signals were firstly dissolved into multiple independent components (ICs) using independent component analysis (ICA). Thereafter, individual ICs with prominent sensory- or cognitive-related ERP components were selected to separately reconstruct scalp EEG signals at representative channels, from which ERP waveforms were built, respectively. Statistical comparisons on amplitudes of stimulus-locked ERP components, i.e., prefrontal P2 and N2, parietal P3, bilateral occipital P1 and N1, revealed significant reduced P3 amplitude in error trials than in correct trials. In addition, significant evident ERN was also observed in error trials but not in correct trials. Considering the temporal locus of semantic conflict in the present task, we concluded that reduced P3 amplitude in error trials reflect impaired resolving process of semantic conflict, which further lead to a performance error in the Stroop color-word matching task.

  8. Examining the Performance of Statistical Downscaling Methods: Toward Matching Applications to Data Products

    Science.gov (United States)

    Dixon, K. W.; Lanzante, J. R.; Adams-Smith, D.

    2017-12-01

    Several challenges exist when seeking to use future climate model projections in a climate impacts study. A not uncommon approach is to utilize climate projection data sets derived from more than one future emissions scenario and from multiple global climate models (GCMs). The range of future climate responses represented in the set is sometimes taken to be indicative of levels of uncertainty in the projections. Yet, GCM outputs are deemed to be unsuitable for direct use in many climate impacts applications. GCM grids typically are viewed as being too coarse. Additionally, regional or local-scale biases in a GCM's simulation of the contemporary climate that may not be problematic from a global climate modeling perspective may be unacceptably large for a climate impacts application. Statistical downscaling (SD) of climate projections - a type of post-processing that uses observations to inform the refinement of GCM projections - is often used in an attempt to account for GCM biases and to provide additional spatial detail. "What downscaled climate projection is the best one to use" is a frequently asked question, but one that is not always easy to answer, as it can be dependent on stakeholder needs and expectations. Here we present results from a perfect model experimental design illustrating how SD method performance can vary not only by SD method, but how performance can also vary by location, season, climate variable of interest, amount of projected climate change, SD configuration choices, and whether one is interested in central tendencies or the tails of the distribution. Awareness of these factors can be helpful when seeking to determine the suitability of downscaled climate projections for specific climate impacts applications. It also points to the potential value of considering more than one SD data product in a study, so as to acknowledge uncertainties associated with the strengths and weaknesses of different downscaling methods.

  9. Colour parameters and shade correspondence of CAD-CAM ceramic systems.

    Science.gov (United States)

    Della Bona, Alvaro; Pecho, Oscar E; Ghinea, Razvan; Cardona, Juan C; Pérez, María M

    2015-06-01

    To evaluate colour differences between (1) CAD-CAM ceramic systems considering shades A1, A2 and A3 and the corresponding nominal shade of VC (Vita Classical shade guide) and (2) shades A1-A2, A2-A3 and A1, A2 and A3 within the same ceramic system. Samples of shades A1, A2 and A3 were fabricated (n=5) from CAD-CAM ceramic blocks (IPS e.max(®) CAD LT and HT, IPS Empress(®) CAD LT and HT, Paradigm™ C, and VITABLOCS(®) Mark II) and polished to 1.0±0.01mm in thickness. Spectral reflectance and colour coordinates were measured using a spectroradiometer inside a viewing booth using the CIE D65 illuminant and the d/0° geometry. Spectral reflectance curves were compared using VAF coefficient and were statistically analyzed using Kruskal-Wallis and the Mann-Whitney U test (α=0.05). Colour coordinates were statistically analyzed using one-way ANOVA, Tukey's test with Bonferroni correction (α=0.001). All colour differences (ΔEab(*) and ΔE00) were analyzed through comparisons with the PT - perceptibility and AT - acceptability thresholds for dental ceramics. ΔE between ceramic systems and its corresponding shade ranged from 6.32 to 13.42 (ΔEab(*)) and 4.48 to 9.30 (ΔE00). ΔE between shades A1-A2, A2-A3 and A1, A2 and A3 ranged, respectively, 1.93-4.82, 1.22-5.59 and 3.63-8.84 (ΔEab(*)); 1.54-3.87, 1.03-3.90 and 2.95-6.51 (ΔE00). Considering the corresponding nominal shade from VC, none of the ceramic systems showed colour differences below the AT. In addition, some ceramic systems showed colour differences below AT (shades A1-A2 and A2-A3) and below PT (shades A2-A3). Careful adjustments should be made to the final shade of CAD-CAM ceramic restorations to reach a clinically acceptable shade match. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. The direction of causality between exports and firm performance: microeconomic evidence from Croatia using the matching approach

    Directory of Open Access Journals (Sweden)

    Miljana Valdec

    2015-03-01

    Full Text Available This paper contributes to the literature by using propensity score matching to test for causal effects of starting to export on firm performance in Croatian manufacturing firm-level data. The results confirm that exporters have characteristics superior to those of non-exporters. In the main sample specification there is pervasive evidence of self-selection into export markets, meaning that firms are successful years before they become exporters. Using multiple firm performance indicators, panel and cross section data models together with various sample specifications there is scant evidence on learning-by-exporting which holds true only in a few cases. On the other hand, higher sales growth is found to be a more conclusive distinguishing characteristic of new exporters. As in similar studies, we find that a part of the results depends on the number of export starters in the estimation sample.

  11. Blue light regulated shade avoidance.

    Science.gov (United States)

    Keuskamp, Diederik H; Keller, Mercedes M; Ballaré, Carlos L; Pierik, Ronald

    2012-04-01

    Most plants grow in dense vegetation with the risk of being out-competed by neighboring plants. These neighbors can be detected not only through the depletion in light quantity that they cause, but also through the change in light quality, which plants perceive using specific photoreceptors. Both the reduction of the red:far-red ratio and the depletion of blue light are signals that induce a set of phenotypic traits, such as shoot elongation and leaf hyponasty, which increase the likelihood of light capture in dense plant stands. This set of phenotypic responses are part of the so called shade avoidance syndrome (SAS). This addendum discusses recent findings on the regulation of the SAS of Arabidopsis thaliana upon blue light depletion. Keller et al. and Keuskamp et al. show that the low blue light attenuation induced shade avoidance response of seedling and rosette-stage A. thaliana plants differ in their hormonal regulation. These studies also show there is a regulatory overlap with the R:FR-regulated SAS.

  12. A numerical/empirical technique for history matching and predicting cyclic steam performance in Canadian oil sands reservoirs

    Science.gov (United States)

    Leshchyshyn, Theodore Henry

    correlation curves. The key reservoir property used to develop a specific curve was to vary the initial mobile water saturation. Individual pilot wells were then history-matched using these correlation curves, adjusting for thermal net pay using perforation height and a fundamentally derived "net pay factor". Operating days (injection plus production) were required to complete the history matching calculations. Subsequent cycles were then history-matched by applying an Efficiency Multiplication Factor (EMF) to the original first cycle prediction method as well as selecting the proper correlation curve for the specific cycle under analysis by using the appropriate steam injection rates and slug sizes. History matches were performed on eight PHOP wells (two back-to-back, five-spot patterns) completed in the Wabiskaw and, three single-well tests completed just below in the McMurray Formation. Predictions for the PHOP Wabiskaw Formation first cycle bitumen production averaged within 1% of the actual pilot total. Bitumen recovery from individual wells for second cycle onwards, was within 20% of actual values. For testing the correlations, matching was also performed on cyclic steam data from British Petroleum's Wolf Lake Project, the Esso Cold Lake Project, and the PCEJ Fort McMurray Pilot, a joint venture of Petro-Canada, Cities Services (Canadian Occidental), Esso, and Japan-Canada Oil Sands with reasonable results.

  13. Produção de alface em função de cultivares e tipos de tela de sombreamento nas condições de Mossoró Performance of lettuce cultivars under different shading intensity and types of polyethylene net in Mossoró

    Directory of Open Access Journals (Sweden)

    Roberto Cleiton F. Queiroga

    2001-11-01

    , evaluated the performance of three lettuce cultivars grown at the nursery stage under shading and three types of polyethylene net, and the second experiment, from December 1999 to January 2000, compared the lettuce yield under shading and no shading. The experimental design in both experiments was a randomized complete block. Treatments in the first experiment were factorial combinations of three types of polyethylene net (2 x 2 mm white and green nets and half-shade black net and three lettuce cultivars (Great Lakes, Verônica and Regina replicated four times. Treatments in the second experiment were these three types of polyethylene net plus one where lettuce cultivar Verônica was grown under no shading (control replicated three times. The lettuce spacing in both experiments was 0.20 x 0.20 m. The performance of lettuce was evaluated through plant height and diameter, leaf number per plant, shoot dry matter content, yield, relative growth rate, gross and net incomes and rate of return. Shading and cultivar interaction affected plant height. Plant diameter and leaf number per plant were affected only by cultivars. Shoot dry matter content and yield were affected by shading as well as cultivars. White polyethylene net shading associated with lettuce cultivar Great Lakes provided the highest economic indices when compared to no shading.

  14. Interior shadings for office indoor visual comfort in humid climate region

    Science.gov (United States)

    Dinapradipta, Asri; Sudarma, Erwin; Defiana, Ima; Erwindi, Collinthia

    2018-03-01

    As part of the fenestration system, the interior shadings have also a role to control the indoor environment to maintain indoor visual comfort. As the occupants have personal access to control these, their control behavior then, might enhance or even worsen indoor comfort performance. The controlling behavior might not only influence indoor comfort performance but can also indicate the success or failure of interior shading as a control device element. This paper is intended to report control behavior patterns, as represented by the variety of the slats’ openings of two types of interior shading i.e. Venetian and Vertical blinds and to analyze these on the concurrent impacts to indoor office building’s indoor illuminance and luminance distribution. The purpose of this research is to figure out the shading control patterns as well as to examine the effectiveness of these two types of interior shadings to control indoor visual environment. This study is a quantitative research using experimentation on the slats’ opening of two types of shadings at two identical office rooms. The research results suggested that both types of blinds seem unsuitable for gaining proper illumination values at work planes in humid tropics area. However, these shadings demonstrate good performance for luminance distribution except for that of the closed Venetian blinds.

  15. Optimization of partially shaded PV array using a modified P&O MPPT algorithm

    Directory of Open Access Journals (Sweden)

    Abdelaziz YOUCEF

    2016-07-01

    Full Text Available A photovoltaic (PV array generated power is directly affected by temperature, solar irradiation, shading, and array configuration. In practice, PV arrays could be partially shaded by could, buildings, trees and other utilities. In this case, multiple maximums appear in the P-V curve, a global maximum and one or several local maximums. The “perturb and observe“ (P&O maximum power point tracking (MPPT algorithm cannot differentiate between a global and a local maximum and it is therefore ineffective when partial shading occurs. First, this paper presents an original mathematical model of the P-V curve of a partially shaded PV array, that was used to perform a simulation study in order to show the P&O algorithm inability to track the global MPP of a PV array solar system under partial shading for low shading irradiation levels, then an adaptation sub algorithm is proposed to be added to the P&O algorithm in order to give it the ability to track the global MPP. This sub algorithm moves the operating point imposed by the partial shading configuration to a point in the vicinity of the global MPP in order to be easily tracked by the P&O algorithm. In the simulation, a PV array with a hundred modules has been considered by using a light, a medium then a severe shading configuration. The results obtained indicate that the proposed modified P&O algorithm is able to track the global MPP for the considered shading configurations and for any shading irradiation level.

  16. Reliability of shade selection using an intraoral spectrophotometer.

    Science.gov (United States)

    Witkowski, Siegbert; Yajima, Nao-Daniel; Wolkewitz, Martin; Strub, Jorge R

    2012-06-01

    In this study, we evaluate the accuracy and reproducibility of human tooth shade selection using a digital spectrophotometer. Variability among examiners and illumination conditions were tested for possible influence on measurement reproducibility. Fifteen intact anterior teeth of 15 subjects were evaluated for their shade using a digital spectrophotometer (Crystaleye, Olympus, Tokyo, Japan) by two examiners under the same light conditions representing a dental laboratory situation. Each examiner performed the measurement ten times on the labial surface of each tooth containing three evaluation sides (cervical, body, incisal). Commission International on Illumination color space values for L* (lightness), a* (red/green), and b* (yellow/blue) were obtained from each evaluated side. Examiner 2 repeated the measurements of the same subjects under different light conditions (i.e., a dental unit with a chairside lamp). To describe measurement precision, the mean color difference from the mean metric was used. The computed confidence interval (CI) value 5.228 (4.6598-5.8615) reflected (represented) the validity of the measurements. Least square mean analysis of the values obtained by examiners 1 and 2 or under different illumination conditions revealed no statistically significant differences (CI = 95%). Within the limits of the present study, the accuracy and reproducibility of dental shade selection using the tested spectrophotometer with respect to examiner and illumination conditions reflected the reliability of this device. This study suggests that the tested spectrophotometer can be recommended for the clinical application of shade selection.

  17. Impact of time and work:rest ratio matched sprint interval training programmes on performance: A randomised controlled trial.

    Science.gov (United States)

    Lloyd Jones, Molly C; Morris, Martyn G; Jakeman, John R

    2017-11-01

    The aim of this study was to examine the effects of a short training intervention using two repeated sprint protocols matched for total sprint duration and work:rest ratio. Randomised-controlled trial. Thirty physically active males were randomly allocated to one of two sprint training groups: a 6s group, a 30s group or a non-exercising control. The training groups were matched for work:rest ratio and total sprint time per session, and completed 6 training sessions over a 2-week period. Before and after the 2 week training period, participants completed a VO 2max test and a 10km time trial on a cycle ergometer. Time trial performance increased significantly by 5.1% in 6s (630±115s to 598±92s; p0.05), and no significant difference between exercise groups (p>0.05). The 6s group increased peak power output by 9.0% (from 1092±263W to 1181±248W; pperformance. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  18. Performance of transmission goals in one and two-touch combined team of Ukraine on football in a friendly match in 2011 and the matches of the European Championship in 2012

    Directory of Open Access Journals (Sweden)

    I.M. Chornobay

    2013-05-01

    Full Text Available The aim of the study is to determine the performance of the transmission ball in one and two-touch athletes Ukrainian National Team. The material for the study included a video of friendly and official matches of the Ukrainian team at the European Championships in 2012. It is established that the team performed for the match 78 - 63 gears with one touch (replication error - 20.51% - 34.72% and 124 - 107 gears in two touches (replication error - 10.28% - 17.79%. It is noted that the lower estimate corresponds to the transmission rate of less than 100 goals in one touch of the match. Team deserves high marks, performing over 130 such programs ball per game. Ukrainian national team in 2011, served an average of 125 per game gear ball in two touches. More gear ball with one touch in 2012 Ukrainian performed in the game against England - 78 assists. It is noted that the figures obtained passes of ball team of Ukraine are the basis for the preparation of the appropriate correction for the next match.

  19. Visible-light wavelength matched microsphere assembly of TiO{sub 2} superfine nanorods and the enhanced photovoltaic performance

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Xiyun; Wang, Yumin; Zhang, Xiang; Sun, Hongxia; Zhang, Qingsong; Niu, Laiyou; Liu, Juan; Zhou, Xingfu, E-mail: Zhouxf@njtech.edu.cn

    2015-05-15

    Graphical abstract: A novel visible-light wavelength matched microspheres assembly of TiO{sub 2} superfine nanorods with a diameter of ∼5 nm was fabricated via a hydrothermal method. The as-prepared rutile TiO{sub 2} microspheres have a uniform diameter of ∼450 nm and show a good light-trapping performance. Dye-sensitized solar cell based on this sample shows a satisfactory energy conversion efficiency of 6.59% and is the highest PCE reported for intrinsic rutile TiO{sub 2}. The further optimized DSSC shows a conversion efficiency of 8.3%, though the internal resistance is higher and the dye absorption is lower than that of widely used anatase TiO{sub 2} nanoparticles. - Highlights: • Microsphere assembly of TiO{sub 2} nanorods with a diameter of ∼5 nm was fabricated. • TiO{sub 2} microspheres size is well matched with the visible light wavelength. • TiO{sub 2} microsphere enhances the light-scattering ability. • Rutile TiO{sub 2} microsphere shows an energy conversion efficiency of 6.59%. • The highest PCE reported for intrinsic rutile TiO{sub 2} is obtained. - Abstract: According to the Mie scattering theory, spheres with the size matched with light wavelength are most suitable for light scattering and enhance the light trapping ability. In this paper, a novel visible-light wavelength matched sphere assembly of TiO{sub 2} superfine nanorods was fabricated via a simple one-step hydrothermal method. The morphology and the structure were examined by field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). The visible subwavelength TiO{sub 2} microsphere resembling an immature chinese chestnut is composed of countless superfine TiO{sub 2} nanorods, the diameter of these building blocks of superfine TiO{sub 2} nanorods is ∼5 nm. The obtained TiO{sub 2} sphere has an average diameter of ca. 450 nm, which matches well with the visible light wavelength and cause the

  20. Kicking velocity and physical, technical, tactical match performance for U18 female football players - effect of a new ball

    DEFF Research Database (Denmark)

    Andersen, Thomas B; Bendiksen, Mads; Pedersen, Jens M

    2012-01-01

    We investigated kicking velocity and physical, technical, and tactical match performance for under-18 (U18) female football players and evaluated the effect of using a newly developed lighter smaller ball. Ten regional league teams participated. Maximal ball velocity was 4±1% higher when kicking...... the new ball (NB) compared with the standard ball (SB) in a laboratory testing situation (23.2±0.4 vs. 22.4±0.3 ms(-1); p.05), but lower-limb muscular RPE was lower with NB (4.2±0.4 vs. 5.2±0.3; p.05). High-intensity running decreased (p.05). In conclusion, physiological demands were high in youth female...

  1. Multi-Objective History Matching with a Proxy Model for the Characterization of Production Performances at the Shale Gas Reservoir

    Directory of Open Access Journals (Sweden)

    Jaejun Kim

    2017-04-01

    Full Text Available This paper presents a fast, reliable multi-objective history-matching method based on proxy modeling to forecast the production performances of shale gas reservoirs for which all available post-hydraulic-fracturing production data, i.e., the daily gas rate and cumulative-production volume until the given date, are honored. The developed workflow consists of distance-based generalized sensitivity analysis (DGSA to determine the spatiotemporal-parameter significance, fast marching method (FMM as a proxy model, and a multi-objective evolutionary algorithm to integrate the dynamic data. The model validation confirms that the FMM is a sound surrogate model working within an error of approximately 2% for the estimated ultimate recovery (EUR, and it is 11 times faster than a full-reservoir simulation. The predictive accuracy on future production after matching 1.5-year production histories is assessed to examine the applicability of the proposed method. The DGSA determines the effective parameters with respect to the gas rate and the cumulative volume, including fracture permeability, fracture half-length, enhanced permeability in the stimulated reservoir volume, and average post-fracturing porosity. A comparison of the prediction accuracy for single-objective optimization shows that the proposed method accurately estimates the recoverable volume as well as the production profiles to within an error of 0.5%, while the single-objective consideration reveals the scale-dependency problem with lesser accuracy. The results of this study are useful to overcome the time-consuming effort of using a multi-objective evolutionary algorithm and full-scale reservoir simulation as well as to conduct a more-realistic prediction of the shale gas reserves and the corresponding production performances.

  2. Shading correction assisted iterative cone-beam CT reconstruction

    Science.gov (United States)

    Yang, Chunlin; Wu, Pengwei; Gong, Shutao; Wang, Jing; Lyu, Qihui; Tang, Xiangyang; Niu, Tianye

    2017-11-01

    Recent advances in total variation (TV) technology enable accurate CT image reconstruction from highly under-sampled and noisy projection data. The standard iterative reconstruction algorithms, which work well in conventional CT imaging, fail to perform as expected in cone beam CT (CBCT) applications, wherein the non-ideal physics issues, including scatter and beam hardening, are more severe. These physics issues result in large areas of shading artifacts and cause deterioration to the piecewise constant property assumed in reconstructed images. To overcome this obstacle, we incorporate a shading correction scheme into low-dose CBCT reconstruction and propose a clinically acceptable and stable three-dimensional iterative reconstruction method that is referred to as the shading correction assisted iterative reconstruction. In the proposed method, we modify the TV regularization term by adding a shading compensation image to the reconstructed image to compensate for the shading artifacts while leaving the data fidelity term intact. This compensation image is generated empirically, using image segmentation and low-pass filtering, and updated in the iterative process whenever necessary. When the compensation image is determined, the objective function is minimized using the fast iterative shrinkage-thresholding algorithm accelerated on a graphic processing unit. The proposed method is evaluated using CBCT projection data of the Catphan© 600 phantom and two pelvis patients. Compared with the iterative reconstruction without shading correction, the proposed method reduces the overall CT number error from around 200 HU to be around 25 HU and increases the spatial uniformity by a factor of 20 percent, given the same number of sparsely sampled projections. A clinically acceptable and stable iterative reconstruction algorithm for CBCT is proposed in this paper. Differing from the existing algorithms, this algorithm incorporates a shading correction scheme into the low

  3. Guiana Highlands, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    [figure removed for brevity, see original site] These two images show exactly the same area in South America, the Guiana Highlands straddling the borders of Venezuela, Guyana and Brazil. The image on the left was created using the best global topographic data set previously available, the U.S. Geological Survey's GTOPO30. In contrast, the image on the right was generated with a new data set recently released by the Shuttle Radar Topography Mission (SRTM) called SRTM30, which represents a significant improvement in our knowledge of the topography of much of the world.GTOPO30, with a resolution of about 928 meters (1496 feet), was developed over a three-year period and published in 1996, and since then has been the primary source of digital elevation data for scientists and analysts involved in global studies. However, since it was compiled from a number of different map sources with varying attributes, the data for some parts of the globe were inconsistent or of low quality.The SRTM data, on the other hand, were collected within a ten-day period using the same instrument in a uniform fashion, and were processed into elevation data using consistent processing techniques. Thus SRTM30 provides a new resource of uniform quality for all parts of the Earth, and since the data, which have an intrinsic resolution of about 30 meters, were averaged and resampled to match the GTOPO30 sample spacing and format, and can be used by the same computer software without modification.The Guiana Highlands are part of the Guyana Shield, which lies in northeast South America and represent one of the oldest land surfaces in the world. Chemical weathering over many millions of years has created a landscape of flat-topped table mountains with dramatic, steep cliffs with a large number of spectacular waterfalls. For example Angel Falls, at 979 meters the highest waterfall in the world, plunges from Auyan Tebuy, part of a mesa of the type that may have been the inspiration for Arthur Conan

  4. Kicking velocity and physical, technical, tactical match performance for U18 female football players--effect of a new ball.

    Science.gov (United States)

    Andersen, Thomas B; Bendiksen, Mads; Pedersen, Jens M; Ørntoft, Christina; Brito, João; Jackman, Sarah R; Williams, Craig A; Krustrup, Peter

    2012-12-01

    We investigated kicking velocity and physical, technical, and tactical match performance for under-18 (U18) female football players and evaluated the effect of using a newly developed lighter smaller ball. Ten regional league teams participated. Maximal ball velocity was 4±1% higher when kicking the new ball (NB) compared with the standard ball (SB) in a laboratory testing situation (23.2±0.4 vs. 22.4±0.3 ms(-1); pgames with NB and SB (169±2 vs. 170±2 bmin(-1); p>.05), but lower-limb muscular RPE was lower with NB (4.2±0.4 vs. 5.2±0.3; p.05). High-intensity running decreased (p.05). In conclusion, physiological demands were high in youth female football games, and decrements in running performance occurred towards the end of games. The players kicked faster and reported lower muscular exertion during games played with a lighter smaller ball, but locomotor activities, heart rate and overall technical-tactical game performance remained unaffected. Copyright © 2012 Elsevier B.V. All rights reserved.

  5. Initial growth of Bauhinia variegata trees under different colored shade nets and light conditions

    Directory of Open Access Journals (Sweden)

    Renata Bachin Mazzini-Guedes

    2014-12-01

    Full Text Available Bauhinia variegata and B. variegata var. candida, commonly known as orchid trees, are small sized trees widely used for urban forestry and landscaping. Adult plants grow under full sun; in Brazil, however, seedlings are generally cultivated in commercial nurseries under natural half-shading. The objective of this study was to evaluate the influence of different colored shade nets and light conditions on the initial growth of B. variegata and B. variegata var. candida. The influence of six light conditions (red net with 50% shading; blue net with 50% shading; black net with 70% shading; black net with 50% shading; black net with 30% shading; and full sun on the initial growth of B. variegata and B. variegata var. candida were evaluated along 160 days, and growth relationships were calculated. Seedlings showed more efficiency on the use of photoassimilated compounds when grown under full sun. Such condition is the most appropriate for seedling production of B. variegata and B. variegata var. candida, contradicting what has been performed in practice.

  6. Partial Shade Stress Test for Thin-Film Photovoltaic Modules: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Silverman, Timothy J.; Deceglie, Michael G.; Deline, Chris; Kurtz, Sarah

    2015-09-02

    Partial shade of monolithic thin-film PV modules can cause reverse-bias conditions leading to permanent damage. In this work, we propose a partial shade stress test for thin-film PV modules that quantifies permanent performance loss. We designed the test with the aid of a computer model that predicts the local voltage, current and temperature stress that result from partial shade. The model predicts the module-scale interactions among the illumination pattern, the electrical properties of the photovoltaic material and the thermal properties of the module package. The test reproduces shading and loading conditions that may occur in the field. It accounts for reversible light-induced performance changes and for additional stress that may be introduced by light-enhanced reverse breakdown. We present simulated and experimental results from the application of the proposed test.

  7. Effects of shading and covering material application for delaying ...

    African Journals Online (AJOL)

    To delay the harvest of Sultani Cekirdeksiz grape variety and to reduce pre and post-harvest botrytis bunch rot severity, shading and covering material application were tested in 2009 to 2010 growing periods. In this study, grape vines were shaded with shading materials which had three different shading densities (35, 55, ...

  8. Effects of shading and covering material application for delaying ...

    African Journals Online (AJOL)

    Jane

    2011-09-28

    Sep 28, 2011 ... To delay the harvest of Sultani Cekirdeksiz grape variety and to reduce pre and post-harvest botrytis bunch rot severity, shading and covering material application were tested in 2009 to 2010 growing periods. In this study, grape vines were shaded with shading materials which had three different shading ...

  9. Influence of Different Work and Rest Distributions on Performance and Fatigue During Simulated Team Handball Match Play.

    Science.gov (United States)

    Moss, Samantha L; Twist, Craig

    2015-10-01

    This study investigated the effect of different interchange strategies on performance and pacing strategy during a simulated team-sport protocol. Eight youth male team handball players completed 2 conditions (LONG-work: 3 × 13:00 minutes, rest: 8:00 minutes; SHORT-work: 5 × 7:48 minutes, rest: 3:45 minutes). Participants were tested for 20-m sprint, countermovement jump, throwing performance, and heart rate (HR) during conditions. Postcondition measures included repeated shuttle-sprint and jump ability, session rating of perceived exertion, blood lactate, and glucose. Faster sprint (3.87 ± 0.27 seconds cf. 3.97 ± 0.24 seconds, effect size [ES] = 0.39, p = 0.03) and throwing performance (70.02 ± 7.40 km·h(-1) cf. 69.04 ± 5.57 km·h(-1), p > 0.05, ES = -0.15) occurred in SHORT compared with LONG by a "likely small" difference. Higher summated HR (157 ± 21 cf. 150 ± 15 AU) occurred in SHORT compared with LONG by a "likely small" difference (ES = 0.37, p > 0.05). SHORT resulted in lower session rating of perceived exertion (224 ± 45 AU cf. 282 ± 35 AU, ES = 1.45, p = 0.001) and higher blood glucose (6.06 ± 0.69 mmol·l(-1) cf. 4.98 ± 1.10 mmol·l(-1), ES = -1.17, p = 0.03) by a "most likely moderate" difference compared with LONG. Repeated shuttle sprint was better preserved after SHORT, with "moderately lower" 10 and 25 m times (p ≤ 0.05). Interchange strategies using SHORT rather than LONG work and rest periods result in lower physiological load, leading to improved fatigue resistance and better preservation of high-intensity movements during matches.

  10. Dynamic Caliper Matching

    OpenAIRE

    Paweł Strawiński

    2011-01-01

    Matched sampling is a methodology used to estimate treatment effects. A caliper mechanism is used to achieve better similarity among matched pairs. We investigate finite sample properties of matching with calipers and propose a slight modification to the existing mechanism. The simulation study compares the performance of both methods and shows that a standard caliper performs well only in case of constant treatment or uniform propensity score distribution. Secondly, in a case of non-uniform ...

  11. Shaded Relief of Minnesota Elevation - Black & White

    Data.gov (United States)

    Minnesota Department of Natural Resources — This file is a product of a shaded relief process on the 30 meter resolution Digital Elevation Model data (dem30im3). This image was created using a custom AML...

  12. ORIGINAL ARTICLE Shade Tree Selection and Management ...

    African Journals Online (AJOL)

    wonde

    . Beer J. Muschler R. Kass D. and. Somarriba E. 1998. Shade management in coffee and cacao plantations. Agroforestry Systems. 38:139–164. Cheng S. Hiwatashi Y. Imai H. Naito M. and Numata, T. 1998. Deforestation and degradation of.

  13. Shaded Relief of Minnesota Elevation - Color

    Data.gov (United States)

    Minnesota Department of Natural Resources — This file is a product of a shaded relief process on the 30 meter resolution Digital Elevation Model data (dem30im3). This image was created using a custom AML...

  14. Power producing sun shades; Elproducerende solafskaermninger

    Energy Technology Data Exchange (ETDEWEB)

    Johnsen, K.; Soerensen, Henrik; Katic, I.; Schmidt-Petersen, H.; AAroe, D.

    2012-01-15

    Integrating photovoltaics into sun shades takes advantage of the best opportunities to capture and utilize solar energy when the shades are most needed to shield users from solar radiation. The report describes results of a development project for solar shading in the form of broad, horizontal and rotating lamellae with solar cells and an integrated control function that simultaneously is optimized based on energy consumption and thermal and visual indoor climate. The project idea was to meet the needs for effective sun protection in the present office, commercial and public buildings, where glass facades are dominant. The conclusion of the development project is that it rarely would be optimal to integrate solar cells into movable shades. This will normally only be relevant in cases where it is justified by architectural considerations. (LN)

  15. Lake Bathymetric DEM Shaded Relief Image

    Data.gov (United States)

    Minnesota Department of Natural Resources — Geo-referenced, shaded relief image of lake bathymetry classified at 5-foot depth intervals. This dataset has a cell resolution of 5 meters (occasionally 10m) as...

  16. A Pareto-based multi-objective optimization algorithm to design energy-efficient shading devices

    International Nuclear Information System (INIS)

    Khoroshiltseva, Marina; Slanzi, Debora; Poli, Irene

    2016-01-01

    Highlights: • We present a multi-objective optimization algorithm for shading design. • We combine Harmony search and Pareto-based procedures. • Thermal and daylighting performances of external shading were considered. • We applied the optimization process to a residential social housing in Madrid. - Abstract: In this paper we address the problem of designing new energy-efficient static daylight devices that will surround the external windows of a residential building in Madrid. Shading devices can in fact largely influence solar gains in a building and improve thermal and lighting comforts by selectively intercepting the solar radiation and by reducing the undesirable glare. A proper shading device can therefore significantly increase the thermal performance of a building by reducing its energy demand in different climate conditions. In order to identify the set of optimal shading devices that allow a low energy consumption of the dwelling while maintaining high levels of thermal and lighting comfort for the inhabitants we derive a multi-objective optimization methodology based on Harmony Search and Pareto front approaches. The results show that the multi-objective approach here proposed is an effective procedure in designing energy efficient shading devices when a large set of conflicting objectives characterizes the performance of the proposed solutions.

  17. Ethnicity and perception of dental shade esthetics.

    Science.gov (United States)

    Niaz, Muhammad Omar; Naseem, Mustafa; Elcock, Claire

    2015-01-01

    To determine whether or not people from different ethnic backgrounds have different attitudes towards dental esthetics and chose different dental appearances in terms of tooth shade, and to determine whether the dental professional's choice and the individual's own choice have any relationship with what the individual ideally perceives as esthetically pleasing. For this cross-sectional analytical study, 120 volunteer students from the University of Sheffield (excepting dental students) from various ethnic backgrounds, of different ages, of both genders, and with varying degree/educational levels were recruited from the campus. The volunteers were asked to complete a questionnaire containing 9 adapted attitudinal statements regarding positive or negative dental esthetic perceptions in terms of tooth shade, with responses on a 5-point Likert scale from "Entirely agree" to "Entirely disagree". Scores for all attitudinal statements were summed up to give an attitudinal score. The participants' ideal, perceived, and actual (self-assessed and investigatorassessed) tooth shade was also determined using a shade guide and a facial mirror. No association between ethnicity and attitudinal score was found. However, statistically significant associations were found between the participants' degree/educational level (P=0.004, 95% Confidence Interval (CI)=-4.18 to -0.82) and their ideal tooth shade value (P=0.038, 95% CI=-3.53 to -0.11). There were strong correlations between self-assessed and professionally assessed tooth shade value in all ethnic groups, with Spearman's rank correlation coefficient (rho) being ρ>0.6. Regarding ideally desired and perceived tooth shade value, weak correlations were found in all ethnic groups (Spearman's rho being ρethnicity and attitude towards dental esthetics with regard to tooth shade, both ethnicity and dental esthetics are very diverse terms with multiple dimensions, each of which needs further investigation with regard to their mutual

  18. Observation of X-ray shadings in synchrotron radiation-total reflection X-ray fluorescence using a color X-ray camera

    Energy Technology Data Exchange (ETDEWEB)

    Fittschen, Ursula Elisabeth Adriane, E-mail: ursula.fittschen@chemie.uni-hamburg.de [Institut für Anorganische und Angewandte Chemie, Universität Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany); Menzel, Magnus [Institut für Anorganische und Angewandte Chemie, Universität Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany); Scharf, Oliver [IfG Institute for Scientific Instruments GmbH, Berlin (Germany); Radtke, Martin; Reinholz, Uwe; Buzanich, Günther [BAM Federal Institute of Materials Research and Testing, Berlin (Germany); Lopez, Velma M.; McIntosh, Kathryn [Los Alamos National Laboratory, Los Alamos, NM (United States); Streli, Christina [Atominstitut, TU Wien, Vienna (Austria); Havrilla, George Joseph [Los Alamos National Laboratory, Los Alamos, NM (United States)

    2014-09-01

    Absorption effects and the impact of specimen shape on TXRF analysis has been discussed intensively. Model calculations indicated that ring shaped specimens should give better results in terms of higher counts per mass signals than filled rectangle or circle shaped specimens. One major reason for the difference in signal is shading effects. Full field micro-XRF with a color X-ray camera (CXC) was used to investigate shading, which occurs when working with small angles of excitation as in TXRF. The device allows monitoring the illuminated parts of the sample and the shaded parts at the same time. It is expected that sample material hit first by the primary beam shade material behind it. Using the CXC shading could be directly visualized for the high concentration specimens. In order to compare the experimental results with calculation of the shading effect the generation of controlled specimens is crucial. This was achieved by “drop on demand” technology. It allows generating uniform, microscopic deposits of elements. The experimentally measured shadings match well with those expected from calculation. - Highlights: • Use of a color X-ray camera and drop on demand printing to diagnose X-ray shading • Specimens were obtained uniform and well-defined in shape and concentration by printing. • Direct visualization and determination of shading in such specimens using the camera.

  19. FUTSAL MATCH-RELATED FATIGUE AFFECTS RUNNING PERFORMANCE AND NEUROMUSCULAR PARAMETERS BUT NOT FINISHING KICK SPEED OR ACCURACY

    Directory of Open Access Journals (Sweden)

    Fabio Milioni

    2016-11-01

    Full Text Available Purpose: The aim of the present study was to investigate the influence of futsal match-related fatigue on running performance, neuromuscular variables, and finishing kick speed and accuracy. Methods: Ten professional futsal players participated in the study (age: 22.2±2.5 years; and initially performed an incremental protocol to determine maximum oxygen uptake (VO2max : 50.6±4.9 mL.kg-1.min-1. Next, simulated games were performed, in four periods of 10 min during which heart rate and blood lactate concentration were monitored. The entire games were video recorded for subsequent automatic tracking. Before and immediately after the simulated game, neuromuscular function was measured by maximal isometric force of knee extension, voluntary activation using twitch interpolation technique, and electromyographic activity. Before, at half time, and immediately after the simulated game, the athletes also performed a set of finishing kicks for ball speed and accuracy measurements. Results: Total distance covered (1st half: 1986.6±74.4 m; 2nd half: 1856.0±129.7 m – P=0.00 and distance covered per minute (1st half: 103.2±4.4 m.min-1; 2nd half: 96.4±7.5 m.min-1 – P=0.00 demonstrated significant declines during the simulated game, as well as maximal isometric force of knee extension (Before: 840.2±66.2 N; After: 751.6±114.3 N – P=0.04 and voluntary activation (Before: 85.9±7.5%; After: 74.1±12.3% – P=0.04, however ball speed and accuracy during the finishing kicks were not significantly affected.Conclusion: Therefore, we conclude that despite the decline in running performance and neuromuscular variables presenting an important manifestation of central fatigue, this condition apparently does not affect the speed and accuracy of finishing kicks.

  20. Color stability of shade guides after autoclave sterilization.

    Science.gov (United States)

    Schmeling, Max; Sartori, Neimar; Monteiro, Sylvio; Baratieri, Luiz

    2014-01-01

    This study evaluated the influence of 120 autoclave sterilization cycles on the color stability of two commercial shade guides (Vita Classical and Vita System 3D-Master). The specimens were evaluated by spectrophotometer before and after the sterilization cycles. The color was described using the three-dimensional CIELab system. The statistical analysis was performed in three chromaticity coordinates, before and after sterilization cycles, using the paired samples t test. All specimens became darker after autoclave sterilization cycles. However, specimens of Vita Classical became redder, while those of the Vita System 3D-Master became more yellow. Repeated cycles of autoclave sterilization caused statistically significant changes in the color coordinates of the two shade guides. However, these differences are considered clinically acceptable.

  1. Use of Relative Speed Zones Increases the High-Speed Running Performed in Team Sport Match Play.

    Science.gov (United States)

    Gabbett, Tim J

    2015-12-01

    This study investigated the activity profiles of junior rugby league players competing in 3 distinct age groups (Under 13, 14, and 15), and 2 distinct playing standards (division 1 and 4). In addition, we reported global positioning system (GPS) data using predefined absolute speed thresholds and speed thresholds expressed relative to a players' individual peak velocity. Ninety male junior rugby league players, representing 1 of 6 teams competing in the Brisbane junior rugby league competition, underwent measurements of peak velocity (through a 40-m sprint) and GPS analysis during competitive matches. Data were described as both absolute speed zones and relative to the individual player's peak velocity. Absolute measures of moderate-, high-, and very high-speed running distances increased with age with the differences among groups typically small to moderate (effect size = 0.24-0.68) in magnitude. However, when data were expressed relative to a players' capacity, younger players and those from lower playing divisions exhibited higher playing intensities and performed greater amounts of high-intensity activity. Moderate and negative relationships (r = -0.43 to -0.46) were found between peak velocity and the amount of relative high-speed running performed. These findings suggest that individualization of velocity bands increases the high-speed running attributed to slower players and decreases the high-speed running attributed to faster players. From a practical perspective, consideration should be given to both the absolute and relative demands of competition to provide insight into training prescription and the recovery requirements of individual players.

  2. Comparison of the Performance of Matched Groups of Black Children and White Children on the Wechsler Preschool and Primary Scale of Intelligence

    Science.gov (United States)

    Kaufman, Alan S.

    1973-01-01

    Wechsler Preschool and Primary Scale of Intelligence (WPPSI) Verbal, Performance and Full Scale IQ's were compared for blacks and whites (matched in age, sex, geographic region, father's occupation, and urban-rural residence). Although whites had significantly higher verbal and Full Scale IQ's at all age levels, Performance IQ was significantly…

  3. Propensity Score Matching Helps to Understand Sources of DIF and Mathematics Performance Differences of Indonesian, Turkish, Australian, and Dutch Students in PISA

    Science.gov (United States)

    Arikan, Serkan; van de Vijver, Fons J. R.; Yagmur, Kutlay

    2018-01-01

    We examined Differential Item Functioning (DIF) and the size of cross-cultural performance differences in the Programme for International Student Assessment (PISA) 2012 mathematics data before and after application of propensity score matching. The mathematics performance of Indonesian, Turkish, Australian, and Dutch students on released items was…

  4. Match-derived relative pitch area changes the physical and team tactical performance of elite soccer players in small-sided soccer games.

    Science.gov (United States)

    Olthof, Sigrid B H; Frencken, Wouter G P; Lemmink, Koen A P M

    2017-11-10

    Small-sided games (SSGs) are used in training sessions to prepare for full-sized matches. For the same number of players, smaller pitch sizes result in decreased physical performance and shorter interpersonal distances. A relative pitch area derived from the full-sized match results in larger pitch sizes and this may increase the fit between SSGs and full-sized matches. This study aimed to investigate SSGs with a traditional small pitch and a match-derived relative pitch area in youth elite soccer players. Four age categories (under-13, under-15, under-17 and under-19) played 4 vs. 4 plus goalkeepers on a small (40x30m, 120m 2 relative pitch area) and large pitch (68x47m, 320m 2 relative pitch area). The number of games per age category ranged 15-30. Positional data (LPM-system) were collected to determine physical (total distance covered, high intensity distance and number of sprints) and team tactical (inter-team distance, LPW-ratio, surface area, stretch indices, goalkeeper-defender distance) performance measures and tactical variability. On a large pitch, physical performance significantly increased, inter-team and intra-team distances were significantly larger and tactical variability of intra-team distance measures significantly increased. The match-derived relative pitch area is an important training manipulation and leads to changes in physical and tactical performance 4 vs. 4 plus goalkeepers.

  5. Affect-matching music improves cognitive performance in adults and young children for both positive and negative emotions

    OpenAIRE

    Franco, Fabia; Swaine, Joel S.; Israni, Shweta; Zaborowska, Katarzyna A.; Kaloko, Fatmata; Kesavarajan, Indu; Majek, Joseph A.

    2014-01-01

    Three experiments assessed the hypothesis that cognitive benefits associated with exposure to music only occur when the perceived emotion expression of the music and the participant’s affective state match. Experiment 1 revealed an affect-matching pattern modulated by gender when assessing high-arousal states of opposite valence (happy/angry) in an adult sample (n=94) in which mood classification was based on self-report, and affective valence in music was differentiated by mode and other exp...

  6. Shade Trees Spatial Distribution and Its Effect on Grains and Beverage Quality of Shaded Coffee Trees

    Directory of Open Access Journals (Sweden)

    Francisco José da Silva Neto

    2018-01-01

    Full Text Available Shading coffee trees has gained importance, especially among smallholders, as an option to improve the products’ quality, therefore acquiring place at the specialty coffee market, where consumers are willing to give bonus for quality. This work aims to evaluate the influence of shade trees’ spatial distribution among coffee trees’ agronomic characteristics, yield, and beans and cup quality of shaded coffee trees. The experimental design consisted of completely randomized blocks with six repetitions and four treatments: coffee trees on shade trees planting rows, distant one meter from the trunk; coffee trees on shade trees planting row, distant six meters from the trunk; and coffee plants between the rows of shade trees, parallel to the previous treatments. The parameters analyzed were plant height, canopy diameter, plagiotropic branches’ length, yield, coffee fruits’ phenological stage, ripe cherries’ Brix degree, percentage of black, unripe, and insect damaged beans, bean size, and beverage quality. Shade trees quickened coffee fruits’ phenological stage of coffee trees nearest to them. This point also showed the best beverage quality, except for overripe fruits. The remaining parameters evaluated were not affected by shade trees’ spatial distribution.

  7. Dietary habits, oral impact on daily performance and type 2 diabetes: a matched case-control study from Sudan.

    Science.gov (United States)

    Mohamed, Hasaan G; Mustafa, Kamal; Ibrahim, Salah O; Åstrøm, Anne N

    2017-05-22

    It is evident that social and behavioural factors influence on individuals' general health and quality of life. Nevertheless, information about the influence of dietary habits on oral health-related quality of life is limited; especially among patients with type 2 diabetes (T2D). The aim of this study was to examine the influence of dietary habits and clinical oral health indicators on oral health-related quality of life in individuals with and without T2D. A total of 149 T2D cases and 298 controls were recruited for this age and gender matched case-control study. Questionnaire-guided interviews were conducted to collect data about socio-demographic characteristics, consumption of food items per week (milk, meat, eggs, vegetables, fruits, sweets and bread) and oral impact on daily performance (OIDP). Plaque index, bleeding on probing, probing depth, tooth mobility, decayed, missing and filled teeth index (DMFT) and root caries were recorded. Difficulty with eating and sleeping were more frequently reported by T2D cases (23.5% and 16.1%, respectively) than by the controls (10.7% and 5.0%, respectively) (P  0). The corresponding ORs were 1.23 (1.01-4.89) and 2.10 (1.08-4.09), respectively. Participants with low consumption of meat and vegetables were more likely than their counterparts with high consumption to report any oral impact. The corresponding ORs were 0.46 (0.25-0.83) and 0.38 (0.17-0.87), respectively. There was a significant interaction between diabetic status and meat consumption as well as between diabetic status and bread consumption. Oral impacts were more frequently reported in T2D cases than controls. Independent of diabetic- and oral clinical status, dietary habits discriminated between individuals with and without oral impacts. The influence of meat and bread consumption on OIDP varied significantly according to T2D status.

  8. South America, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    This image of South America was generated with data from the Shuttle Radar Topography Mission (SRTM). For this broad view the resolution of the data was first reduced to 30 arcseconds (about 928 meters north-south but variable east-west), matching the best previously existing global digital topographic data set called GTOPO30. The data were then resampled to a Mercator projection with approximately square pixels (about one kilometer, or 0.6 miles, on each side). Even at this decreased resolution the variety of landforms comprising the South American continent is readily apparent.Topographic relief in South America is dominated by the Andes Mountains, which extend all along the Pacific Coast. These mountains are created primarily by the convergence of the Nazca and South American tectonic plates. The Nazca Plate, which underlies the eastern Pacific Ocean, slides under western South America resulting in crustal thickening, uplift, and volcanism. Another zone of plate convergence occurs along the northwestern coast of South America where the Caribbean Plate also slides under the South American Plate and forms the northeastern extension of the Andes Mountains.East of the Andes, much of northern South America drains into the Amazon River, the world's largest river in terms of both watershed area and flow volume. Topographic relief is very low in much of the Amazon Basin but SRTM data provide an excellent detailed look at the basin's three-dimensional drainage pattern, including the geologic structural trough (syncline) that hosts the eastern river channel.North of the Amazon, the Guiana Highlands commonly stand in sharp contrast to the surrounding lowlands, indeed hosting the world's tallest waterfall, Angel Falls (979 meters or 3212 feet). Folded and fractured bedrock structures are distinctive in the topographic pattern.South of the Amazon, the Brazilian Highlands show a mix of landforms, including some broad areas of consistent topographic patterns that indicate the

  9. Quantifying the potential of automated dynamic solar shading in office buildings through integrated simulations of energy and daylight

    DEFF Research Database (Denmark)

    Nielsen, Martin Vraa; Svendsen, Svend; Bjerregaard Jensen, Lotte

    2011-01-01

    comfort. To gain a complete picture of any façade’s performance and subsequently carry out a reasonable benchmarking of various façade alternatives, the total energy consumption and indoor environment need to be considered simultaneously. We quantified the potential of dynamic solar shading façade...... components by using integrated simulations that took energy demand, the indoor air quality, the amount of daylight available, and visual comfort into consideration. Three types of façades were investigated (without solar shading, with fixed solar shading, and with dynamic solar shading), and we simulated...... for significant energy reduction, but greater differences and conflicting tendencies were revealed when the energy needed for heating, cooling and artificial lighting were considered separately. Moreover, the use of dynamic solar shading dramatically improved the amount of daylight available compared to fixed...

  10. The color differences of direct esthetic restorative materials after setting and compared with a shade guide.

    Science.gov (United States)

    Barutcigil, Cağatay; Harorli, Osman Tolga; Yildiz, Mehmet; Ozcan, Erdal; Arslan, Hakan; Bayindir, Funda

    2011-06-01

    The authors conducted a study to evaluate esthetic restorative materials' color differences after setting and color matching between set materials and a shade guide. The authors evaluated 13 resin-based composites, one silorane-based composite, two polyacid-modified resin composites and one conventional glass ionomer cement. They measured the color parameters of the samples, which were 8 millimeters in diameter and 1.5 mm in thickness, before and after they were set according to the Commission International de l'Eclairage (CIE) L*a*b* color scale relative to standard illumination against a white background by means of a dental colorimeter. They also compared the final colors of the restorative materials with a shade guide. Color difference values for each restorative material ranged from 3.25 to 14.04. With the exception of Fuji IX (GC, Tokyo), Filtek P60 (3M ESPE) and Te-Econom (Ivoclar Vivadent), the restorative materials exhibited a perceptible color change after setting. Color difference values between the set materials and the shade guide tabs ranged from 1.86 to 11.83. With the exception of Filtek Supreme XT (3M ESPE) and Fuji IX, the materials exhibited a perceptible difference. Most of the materials tested exhibited a significant color change after polymerization and did not match the shade guide tab after undergoing light curing.

  11. Comparison of oxygen uptake during and after the execution of resistance exercises and exercises performed on ergometers, matched for intensity

    Directory of Open Access Journals (Sweden)

    Vilaça-Alves José

    2016-12-01

    Full Text Available The aim of this study was to compare the values of oxygen uptake (VO2 during and after strength training exercises (STe and ergometer exercises (Ee, matched for intensity and exercise time. Eight men (24 ± 2.33 years performed upper and lower body cycling Ee at the individual’s ventilatory threshold (VE/VCO2. The STe session included half squats and the bench press which were performed with a load at the individual blood lactate concentration of 4 mmol/l. Both sessions lasted 30 minutes, alternating 50 seconds of effort with a 10 second transition time between upper and lower body work. The averaged overall VO2 between sessions was significantly higher for Ee (24.96 ± 3.6 ml·kg·min-1 compared to STe (21.66 ± 1.77 ml·kg·min-1 (p = 0.035, but this difference was only seen for the first 20 minutes of exercise. Absolute VO2 values between sessions did not reveal differences. There were more statistically greater values in Ee compared to STe, regarding VO2 of lower limbs (25.44 ± 3.84 ml·kg·min-1 versus 21.83 ± 2·24 ml·kg·min-1; p = 0.038 and upper limbs (24.49 ± 3.84 ml·kg·min-1 versus 21.54 ± 1.77 ml·kg·min-1; p = 0.047. There were further significant differences regarding the moment effect (p<0.0001 of both STe and Ee sessions. With respect to the moment × session effect, only VO2 5 minutes into recovery showed significant differences (p = 0.017. In conclusion, although significant increases in VO2 were seen following Ee compared to STe, it appears that the load/intensity, and not the material/equipment used for the execution of an exercise, are variables that best influence oxygen uptake.

  12. Effect of toothbrushing on shade and surface roughness of extrinsically stained pressable ceramics.

    Science.gov (United States)

    Garza, Lessly A; Thompson, Geoffrey; Cho, Seok-Hwan; Berzins, David W

    2016-04-01

    The effect of toothbrushing on extrinsically stained pressable ceramic materials is unknown. The purpose of this in vitro study was to investigate the effects of toothbrushing on the shade and surface roughness of extrinsically stained, pressable ceramics. Two materials, leucite-based (IPS Empress Esthetic [EE]; Ivoclar Vivadent AG) and lithium disilicate-based ceramic (IPS e.max Press [EP]; Ivoclar Vivadent AG), were studied. For each material, 24 disk-shaped specimens, 10 mm (diameter)×3 mm (height) were fabricated. Three different methods (n=8) of applying extrinsic stains were performed on each material: glazed only (G, control group); stained then glazed (SG); and stained and glazed together (T). The specimens were brushed with a multistation brushing machine under a load of 1.96 N at a rate of 90 strokes per minute with a soft and straight toothbrush (Oral-B #35) and a 1:1 toothpaste and distilled water slurry. Shade and roughness were measured at baseline and at 72, 144, 216, and 288 hours, which is equivalent to 3, 6, 9, and 12 years of simulated toothbrushing for 2 minutes twice a day. A repeated measures ANOVA with staining technique as a fixed factor was used to evaluate shade and roughness (α=.05). For EE groups, no significant change was found after 12 years of simulated toothbrushing regarding shade and surface roughness, irrespective of staining techniques (P>.05). However, EP groups demonstrated a significant shade change and an increase in surface roughness after 12 years of simulated toothbrushing. Shade change was found to depend on the method of applying stain. For the EP-SG technique, a significant shade change was observed only at the 9- to 12-year interval (P=.047). However, the EP-T technique demonstrated a significant difference in shade between baseline and 3 years (P=.005) and in the 6- to 9-year interval (P=.005). Surface roughness was only significantly affected at baseline and 3 years for the EP-T group (P=.005). For the shade and

  13. Response of lentil (Lens culinaris Medik.) to artificial shading during the reproductive stage

    International Nuclear Information System (INIS)

    Peñaloza H, Enrique; Díaz S, Jorge

    1997-01-01

    Lentil production in southern Chile is subject to significant seasonal fluctuations in solar radiation received during the reproductive stage, with an average variation ranging from 300 to 650 g cal cm -2 day -1 . to quantify the effect of reducing incident light on crop performance, artifical shading experiments were conducted with 80% light reduction during different periods spanning the reprodcutive stage, as well as various degrees of shading (0, 20, 35, 50 and 80%) throughout. shading was achieved by using a black polypropylene net placed at 0.8 m above soil surface. The experiments were carried out during the 1991/92, 1992/93 and 1993/94 cropping seasons at the Centro Regional de Investigación Carillanca, INIA (38°41' S, 72°25' W). The effect of 80% shading on seed yield was dependent upon the period at which the treatment was imposed. Seed yield reduction was higher when shading occurred during the growth stages R--R5, accounting 35, 48 and 59% yield losses for the 1991/92, 1992/93 and 1993/94 seasons, respectively. No significant diffreences were detected between R1-R3 and R5-R8 periods, with seed yield losses averaging 39 (1991/92), 10 (1992/93) and 25% (1993/94). Variations in seed yield due to shading were explained mainly by a reduction of total pods m -2 and an increase in empty (flat) pods (R3-R5), and a reduction on the average seed weight (R5-R8). As expected, the higher losses occurred on treatments exposed to two (R1-R5, R3-R8) or three (R1-R8) periods of shading. Grain yield under different degrees of shading was significantly reduced, with responses fitted to the functions Y = 2.020-32.5s + 0.18s 2 (1992/93) and Y = 2.172-25.6s-0.04s 2 (1993/94). Reduction on seed yield was associated to a decrease in total pods m -2 and average seed weight, whereas empty pods increased significantly only at near 80% shading. These results point at R3-R5 as the most sensible growth stage under 80% shading and demonstrate the sensitiveness of lentil

  14. CERN Computing Colloquia Spring Series: IT Security - A High-Performance Pattern Matching Engine for Intrusion Detection

    CERN Multimedia

    CERN. Geneva

    2006-01-01

    The flexible and modular design of the engine allows a broad spectrum of applications, ranging from high-end enterprise level network devices that need to match hundreds of thousands of patterns at speeds of tens of gigabits per second, to low-end dev...

  15. Written Lists as Mediating Stimuli in the Matching-to-Sample Performances of Individuals with Mental Retardation.

    Science.gov (United States)

    Stromer, Robert; Mackay, Harry A.; McVay, Alison A.; Fowler, Thomas

    1998-01-01

    A study of three adolescents with mental retardation found that six-picture matching was more accurate when a written list was available at the time the participant selected the comparison pictures than on trials in which a list was written, read, or both, but was not available during comparison selection. (CR)

  16. South America, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    This image of South America was generated with data from the Shuttle Radar Topography Mission (SRTM). For this broad view the resolution of the data was first reduced to 30 arcseconds (about 928 meters north-south but variable east-west), matching the best previously existing global digital topographic data set called GTOPO30. The data were then resampled to a Mercator projection with approximately square pixels (about one kilometer, or 0.6 miles, on each side). Even at this decreased resolution the variety of landforms comprising the South American continent is readily apparent.Topographic relief in South America is dominated by the Andes Mountains, which extend all along the Pacific Coast. These mountains are created primarily by the convergence of the Nazca and South American tectonic plates. The Nazca Plate, which underlies the eastern Pacific Ocean, slides under western South America resulting in crustal thickening, uplift, and volcanism. Another zone of plate convergence occurs along the northwestern coast of South America where the Caribbean Plate also slides under the South American Plate and forms the northeastern extension of the Andes Mountains.East of the Andes, much of northern South America drains into the Amazon River, the world's largest river in terms of both watershed area and flow volume. Topographic relief is very low in much of the Amazon Basin but SRTM data provide an excellent detailed look at the basin's three-dimensional drainage pattern, including the geologic structural trough (syncline) that hosts the eastern river channel.North of the Amazon, the Guiana Highlands commonly stand in sharp contrast to the surrounding lowlands, indeed hosting the world's tallest waterfall, Angel Falls (979 meters or 3212 feet). Folded and fractured bedrock structures are distinctive in the topographic pattern.South of the Amazon, the Brazilian Highlands show a mix of landforms, including some broad areas of consistent topographic patterns that indicate the

  17. Fast shading correction for cone beam CT in radiation therapy via sparse sampling on planning CT.

    Science.gov (United States)

    Shi, Linxi; Tsui, Tiffany; Wei, Jikun; Zhu, Lei

    2017-05-01

    The image quality of cone beam computed tomography (CBCT) is limited by severe shading artifacts, hindering its quantitative applications in radiation therapy. In this work, we propose an image-domain shading correction method using planning CT (pCT) as prior information which is highly adaptive to clinical environment. We propose to perform shading correction via sparse sampling on pCT. The method starts with a coarse mapping between the first-pass CBCT images obtained from the Varian TrueBeam system and the pCT. The scatter correction method embedded in the Varian commercial software removes some image errors but the CBCT images still contain severe shading artifacts. The difference images between the mapped pCT and the CBCT are considered as shading errors, but only sparse shading samples are selected for correction using empirical constraints to avoid carrying over false information from pCT. A Fourier-Transform-based technique, referred to as local filtration, is proposed to efficiently process the sparse data for effective shading correction. The performance of the proposed method is evaluated on one anthropomorphic pelvis phantom and 17 patients, who were scheduled for radiation therapy. (The codes of the proposed method and sample data can be downloaded from https://sites.google.com/view/linxicbct) RESULTS: The proposed shading correction substantially improves the CBCT image quality on both the phantom and the patients to a level close to that of the pCT images. On the phantom, the spatial nonuniformity (SNU) difference between CBCT and pCT is reduced from 74 to 1 HU. The root of mean square difference of SNU between CBCT and pCT is reduced from 83 to 10 HU on the pelvis patients, and from 101 to 12 HU on the thorax patients. The robustness of the proposed shading correction is fully investigated with simulated registration errors between CBCT and pCT on the phantom and mis-registration on patients. The sparse sampling scheme of our method successfully

  18. Matched-pair classification

    Energy Technology Data Exchange (ETDEWEB)

    Theiler, James P [Los Alamos National Laboratory

    2009-01-01

    Following an analogous distinction in statistical hypothesis testing, we investigate variants of machine learning where the training set comes in matched pairs. We demonstrate that even conventional classifiers can exhibit improved performance when the input data has a matched-pair structure. Online algorithms, in particular, converge quicker when the data is presented in pairs. In some scenarios (such as the weak signal detection problem), matched pairs can be generated from independent samples, with the effect not only doubling the nominal size of the training set, but of providing the structure that leads to better learning. A family of 'dipole' algorithms is introduced that explicitly takes advantage of matched-pair structure in the input data and leads to further performance gains. Finally, we illustrate the application of matched-pair learning to chemical plume detection in hyperspectral imagery.

  19. Experimental and Numerical Analysis of Modelling of Solar Shading

    DEFF Research Database (Denmark)

    Winther, Frederik Vildbrad; Liu, Mingzhe; Heiselberg, Per

    2017-01-01

    The use of solar shading in future low energy office buildings is essential for minimizing energy consumption for building services, while maintaining thermal conditions. Implementing solar shading technologies in energy calculations and thermal building simulation programs is essential in order...... to demonstrate the effect of adaptive solar shading. In order to document the benefits of the shading technology, the description of the shading device in the thermal building simulation software must be described at a reasonably accurate level, related to the specific solar shading device. This research...... presents different approaches for modeling solar shading devices, demonstrating the level of accuracy in relation to measurement conducted in a full-scale façade test facility at Aalborg University. The research bridges the gap between increased complexity of solar shading technologies and the use...

  20. USGS Hill Shade Base Map Service from The National Map

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — USGS Hill Shade (or Shaded Relief) is a tile cache base map created from the National Elevation Dataset (NED), a seamless dataset of best available raster elevation...

  1. Matching Organs

    Science.gov (United States)

    ... to know FAQ Living donation What is living donation? Organs Types Being a living donor First steps Being ... brochures What Every Patient Needs to Know Living Donation Multiple Listing Visit UNOS Store Learn more How organs are matched How to become a living donor ...

  2. Shade adaptation of photosynthesis in Coffea arabica.

    Science.gov (United States)

    Friend, D J

    1984-12-01

    The effect of irradiance on the rate of net photosynthesis was measured for mature leaves of coffee grown under five levels of radiation from 100% to 5% daylight. The rate of light-saturated photosynthesis per unit leaf area (PNmax) increased from 2 μmol CO2 m(-2) s(-1) under 5% daylight to 4.4 μmol CO2 m(-2) s(-1) under 100% daylight. The photon flux density (PAR, photosynthetically active radiation) needed for 50% saturation of photosynthesis, as well as the light compensation point, also increased with increasing levels of irradiation during growth. The quantum efficiency of photosynthesis (α), measured by the initial slope of the photosynthetic response to increasing irradiance, was greater under shaded growth conditions. The rate of dark respiration was greatest for plants grown in full daylight. On the basis of the increase in the quantal efficiency of photosynthesis and the low light compensation point when grown under shaded conditions, coffee shows high shade adaptation. Plants adjusted to shade by an increased ability to utilize short-term increases in irradiance above the level of the growth irradiance (measured by the difference between photosynthesis at the growth irradiance, PNg, and PNmax).

  3. Shaded Relief Images for Cartographic Applications.

    Science.gov (United States)

    1981-04-01

    Relief: Cache, OK 133 C18 Orthonormal Shaded Relief Image With Variable Sun Azimuth Merged With SIMCON Contours (20-meters Interval) 134 CI 9 Relief...lines generated by the program SIMCON 3 9 have been overlaid by FTL-developed software. 3 9 Thle next two imiages illustrate the relief contour option of

  4. 21 CFR 872.3690 - Tooth shade resin material.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Tooth shade resin material. 872.3690 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3690 Tooth shade resin material. (a) Identification. Tooth shade resin material is a device composed of materials such as bisphenol-A glycidyl...

  5. Effect of Dominant Shade Trees on Coffee Production in Manasibu ...

    African Journals Online (AJOL)

    Effect of shade trees species on coffee production in Manasibu district, West Ethiopia was assessed by the current study. It was aimed to (i) identify the most suitable dominant shade tree species for coffee production; (ii) assess the status of coffee production under different dominant coffee shade trees and unshaded areas ...

  6. Risk factors and outcomes for catastrophic failures at the top of long pedicle screw constructs: a matched cohort analysis performed at a single center.

    Science.gov (United States)

    O'Leary, Patrick T; Bridwell, Keith H; Lenke, Lawrence G; Good, Christopher R; Pichelmann, Mark A; Buchowski, Jacob M; Kim, Yongjung J; Flynn, Jennifer

    2009-09-15

    Retrospective review with matched-cohort analysis performed at a single institution. To determine risk factors and outcomes for acute fractures at the proximal aspect of long pedicle screw constructs. Acute fractures at the top of long segmental pedicle screw constructs (FPSC) can be catastrophic. Substantial surgical increase in lordosis may precipitate this problem. In relation to a matched cohort, we postulated that age, body mass index (BMI), and significant correction of lumbar lordosis would increase risk of FPSC and patients with FPSC would have lesser improvements in outcomes. Thirteen patients who sustained FPSC between 2000 and 2007 were evaluated. During this time, 264 patients aged 40 or older had a spinal fusion from the thoracic spine to the sacrum using an all-pedicle screw construct. A cohort of 31 of these patients without FPSC but with all pedicle screw constructs was matched for diagnosis of positive sagittal imbalance, gender, preoperative C7 sagittal plumb, and number of levels fused. There was a significant difference in age (P = 0.02) and BMI (P = 0.006) between the matched groups. There was no significant difference in preoperative/postoperative C7 plumb or change in lumbar lordosis between groups. Acute neurological deficit developed in 2 patients; both patients improved substantially after revision surgery. Nine patients underwent proximal extension of the fusion. For 7 of the 13 FPSC patients with bone mineral density data (BMD) available, average T score was-1.73; -0.58 for the matched group (10/31 with bone mineral density data) (P = 0.02). Factors that increased the risk of FPSC included obesity and older age. Osteopenia increased the risk as evidenced by BMD (based on 17 patients) and the older age of these patients. There was no statistical difference in clinical improvement between groups based on ODI, but the FPSC group did demonstrate a smaller improvement in ODI score than the matched cohort.

  7. Influence of Shading on Cooling Energy Demand

    Science.gov (United States)

    Rabczak, Sławomir; Bukowska, Maria; Proszak-Miąsik, Danuta; Nowak, Krzysztof

    2017-10-01

    The article presents an analysis of the building cooling load taking into account the variability of the factors affecting the size of the heat gains. In order to minimize the demand for cooling, the effect of shading elements installed on the outside on the windows and its effect on size of the cooling capacity of air conditioning system for the building has been estimated. Multivariate building cooling load calculations to determine the size of the reduction in cooling demand has derived. Determination of heat gain from the sun is laborious, but gives a result which reflects the influence of the surface transparent partitions, devices used as sunscreen and its location on the building envelope in relation to the world, as well as to the internal heat gains has great attention in obtained calculation. In this study, included in the balance sheet of solar heat gains are defined in three different shading of windows. Calculating the total demand cooling is made for variants assuming 0% shading baffles transparent, 50% shading baffles transparent external shutters at an angle of 45 °, 100% shading baffles transparent hours 12 from the N and E and from 12 from the S and W of the outer slat blinds. The calculation of the average hourly cooling load was taken into account the option assuming the hypothetical possibility of default by up to 10% of the time assumed the cooling season temperatures in the rooms. To reduce the consumption of electricity energy in the cooling system of the smallest variant identified the need for the power supply for the operation of the cooling system. Also assessed the financial benefits of the temporary default of comfort.

  8. Green light induces shade avoidance symptoms.

    Science.gov (United States)

    Zhang, Tingting; Maruhnich, Stefanie A; Folta, Kevin M

    2011-11-01

    Light quality and quantity affect plant adaptation to changing light conditions. Certain wavelengths in the visible and near-visible spectrum are known to have discrete effects on plant growth and development, and the effects of red, far-red, blue, and ultraviolet light have been well described. In this report, an effect of green light on Arabidopsis (Arabidopsis thaliana) rosette architecture is demonstrated using a narrow-bandwidth light-emitting diode-based lighting system. When green light was added to a background of constant red and blue light, plants exhibited elongation of petioles and upward leaf reorientation, symptoms consistent with those observed in a shaded light environment. The same green light-induced phenotypes were also observed in phytochrome (phy) and cryptochrome (cry) mutant backgrounds. To explore the molecular mechanism underlying the green light-induced response, the accumulation of shade-induced transcripts was measured in response to enriched green light environments. Transcripts that have been demonstrated to increase in abundance under far-red-induced shade avoidance conditions either decrease or exhibit no change when green light is added. However, normal far-red light-associated transcript accumulation patterns are observed in cryptochrome mutants grown with supplemental green light, indicating that the green-absorbing form of cryptochrome is the photoreceptor active in limiting the green light induction of shade-associated transcripts. These results indicate that shade symptoms can be induced by the addition of green light and that cryptochrome receptors and an unknown light sensor participate in acclimation to the enriched green environment.

  9. Cyclic Loading Effect on Color Stability of Unshaded versus Shaded Zirconia.

    Science.gov (United States)

    Spyropoulou, Panagiota-Eirini; Kamposiora, Phophi; Eliades, George; Papavasiliou, George; Razzoog, Michael E; Bayne, Stephen C

    2016-01-01

    Shaded versions of dental zirconia may improve initial color matching to teeth, but might change color with cyclic mechanical loading. The purpose of this study was to measure the color of unshaded and shaded zirconia dental ceramic before and after cyclic mechanical loading and calculate color differences (ΔE). Disk-shaped specimens (N = 30, Nobel Procera, 0.8 mm thick, 12 mm diameter) of unshaded or shaded zirconia (intrinsically shaded by small oxide modifications) were fabricated by the Nobel Biocare using standard CAD-CAM processing. Milled surfaces were polished. CIE L*a*b* values were measured (Konica Minolta spectrophotometer) before and after mechanical cycling (custom modified Leinfelder test machine, biaxial flexure loading, load = 80 N × 500,000 cycles, dry), and L*a*b* individual differences and ΔE color differences were calculated and compared (ANOVA, p zirconia specimens was influenced by cyclic loading (p zirconia restorations, especially in the esthetic zone. Minor color changes that are individually imperceptible to the human eye within different restorative components may be compounded to produce clinically significant color change that is not aesthetically acceptable. © 2015 Wiley Periodicals, Inc.

  10. Maximizing Power Output of a Partially Shaded Total-Cross-Tied Photovoltaic array

    Directory of Open Access Journals (Sweden)

    Neha Saurabh Shah

    2017-01-01

    Full Text Available Non-uniform conditions on the modules of the PV array, especially, partial shading reduces the output of the PV array to a large extent. The shaded module in a string limits the current of the entire string and hence, the output power of the string.  The output power under such conditions is reported to be higher for total-cross-tied (TCT configuration. This paper describes two different approaches, one based on current compensation (current equalization and another based on voltage equalization, to extract higher power from the partially shaded total-cross-tied photovoltaic array. The TCT configuration is considered to minimize the number of converters, sensors, cost and complexity involved. The additional converters in the two distinct approaches evaluated here operate only when the partial shading occurs and are controlled to minimize the current and voltage miss-matches. The analysis and the control algorithm are presented. Simulation results obtained in MATLAB/Simulink are included to demonstrate the effectiveness of both methods and the relative merits and demerits of these approaches are highlighted.

  11. Outdoor characterization and comparison of string and MLPE under clear and partially shaded conditions

    NARCIS (Netherlands)

    Sinapis, Kostas; Litjens, Geert; van den Donker, Menno; Folkerts, Wiep; van Sark, Wilfried

    2015-01-01

    Building integrated and building attached photovoltaic (BIPV, BAPV) systems may suffer from lower performance than predicted as a result of unwanted partial shading. New system architectures have been proposed to optimize performance. The common approach of these new architectures is to track the

  12. Effects of ceramic shade and thickness on the micro-mechanical properties of a light-cured resin cement in different shades.

    Science.gov (United States)

    Öztürk, Elif; Bolay, Şükran; Hickel, Reinhard; Ilie, Nicoleta

    2015-01-01

    The aim of this study was to evaluate the micro-mechanical properties of a light-cured resin cement in four different shades when polymerized through a leucite-reinforced glass-ceramic in different shades and thicknesses. A light-cured resin cement in four different shades (HV+1, HV+3, LV-1 and LV-3) was selected for this study. The specimens were cured by using a LED-unit (Bluephase®, IvoclarVivadent) for 20 s under a leucite-reinforced glass-ceramic (IPS Empress® CAD, IvoclarVivadent) in two different shades (A1 and A3) of different thicknesses (1 and 2 mm). Specimens cured directly, without an intermediate ceramic, served as control. The specimens were stored after curing for 24 h at 37°C by maintaining moisture conditions with distilled water. Micro-mechanical properties (indentation modulus, E; Hardness, HV; creep, Cr) of the resin cements were measured with an automatic microhardness indenter (Fisherscope H100C, Germany). Twenty groups were included (n = 3), while 10 measurements were performed on each specimen. Data were statistically analyzed by using one-way ANOVA and Tukey's post-hoc test, as well as a multivariate analysis to test the influence of the study parameters. Significant differences were observed between the micromechanical properties of the tested resin cements (p resin cement shade showed the highest effect on the micromechanical properties (Partial-eta squared (ηP(2))-E = 0.45, ηP(2)-HV = 0.59, ηP(2)-Cr = 0.29) of the resin cement, followed by ceramic thickness (ηP(2)-E = 0.38, ηP(2)-HV = 0.3, ηP(2)-Cr = 0.04) and ceramic shade (ηP(2)-E = 0.2, ηP(2)-HV = 0.26). Resin cement shade is an important factor influencing the mechanical properties of the material. Light shades of a resin cement express higher E and HV as well as lower Cr values compared with the darker ones.

  13. Exercise performance and cardiovascular health variables in 70-year-old male soccer players compared to endurance-trained, strength-trained and untrained age-matched men

    DEFF Research Database (Denmark)

    Randers, Morten Bredsgaard; Andersen, Jesper Løvind; Petersen, Jesper

    2014-01-01

    Abstract The aim was to investigate performance variables and indicators of cardiovascular health profile in elderly soccer players (SP, n = 11) compared to endurance-trained (ET, n = 8), strength-trained (ST, n = 7) and untrained (UT, n = 7) age-matched men. The 33 men aged 65-85 years underwent...

  14. Real-time supervised detection of pink areas in dermoscopic images of melanoma: importance of color shades, texture and location.

    Science.gov (United States)

    Kaur, R; Albano, P P; Cole, J G; Hagerty, J; LeAnder, R W; Moss, R H; Stoecker, W V

    2015-11-01

    Early detection of malignant melanoma is an important public health challenge. In the USA, dermatologists are seeing more melanomas at an early stage, before classic melanoma features have become apparent. Pink color is a feature of these early melanomas. If rapid and accurate automatic detection of pink color in these melanomas could be accomplished, there could be significant public health benefits. Detection of three shades of pink (light pink, dark pink, and orange pink) was accomplished using color analysis techniques in five color planes (red, green, blue, hue, and saturation). Color shade analysis was performed using a logistic regression model trained with an image set of 60 dermoscopic images of melanoma that contained pink areas. Detected pink shade areas were further analyzed with regard to the location within the lesion, average color parameters over the detected areas, and histogram texture features. Logistic regression analysis of a separate set of 128 melanomas and 128 benign images resulted in up to 87.9% accuracy in discriminating melanoma from benign lesions measured using area under the receiver operating characteristic curve. The accuracy in this model decreased when parameters for individual shades, texture, or shade location within the lesion were omitted. Texture, color, and lesion location analysis applied to multiple shades of pink can assist in melanoma detection. When any of these three details: color location, shade analysis, or texture analysis were omitted from the model, accuracy in separating melanoma from benign lesions was lowered. Separation of colors into shades and further details that enhance the characterization of these color shades are needed for optimal discrimination of melanoma from benign lesions. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  15. Estimation of Areal Mean Rainfall in Remote Areas Using B-SHADE Model

    Directory of Open Access Journals (Sweden)

    Tao Zhang

    2016-01-01

    Full Text Available This study presented a method to estimate areal mean rainfall (AMR using a Biased Sentinel Hospital Based Area Disease Estimation (B-SHADE model, together with biased rain gauge observations and Tropical Rainfall Measuring Mission (TRMM data, for remote areas with a sparse and uneven distribution of rain gauges. Based on the B-SHADE model, the best linear unbiased estimation of AMR could be obtained. A case study was conducted for the Three-River Headwaters region in the Tibetan Plateau of China, and its performance was compared with traditional methods. The results indicated that B-SHADE obtained the least estimation biases, with a mean error and root mean square error of −0.63 and 3.48 mm, respectively. For the traditional methods including arithmetic average, Thiessen polygon, and ordinary kriging, the mean errors were 7.11, −1.43, and 2.89 mm, which were up to 1027.1%, 127.0%, and 358.3%, respectively, greater than for the B-SHADE model. The root mean square errors were 10.31, 4.02, and 6.27 mm, which were up to 196.1%, 15.5%, and 80.0%, respectively, higher than for the B-SHADE model. The proposed technique can be used to extend the AMR record to the presatellite observation period, when only the gauge data are available.

  16. Tracking the global maximum power point of PV arrays under partial shading conditions

    Science.gov (United States)

    Fennich, Meryem

    This thesis presents the theoretical and simulation studies of the global maximum power point tracking (MPPT) for photovoltaic systems under partial shading. The main goal is to track the maximum power point of the photovoltaic module so that the maximum possible power can be extracted from the photovoltaic panels. When several panels are connected in series with some of them shaded partially either due to clouds or shadows from neighboring buildings, several local maxima appear in the power vs. voltage curve. A power increment based MPPT algorithm is effective in identifying the global maximum from the several local maxima. Several existing MPPT algorithms are explored and the state-of-the-art power increment method is simulated and tested for various partial shading conditions. The current-voltage and power-voltage characteristics of the PV model are studied under different partial shading conditions, along with five different cases demonstrating how the MPPT algorithm performs when shading switches from one state to another. Each case is supplemented with simulation results. The method of tracking the Global MPP is based on controlling the DC-DC converter connected to the output of the PV array. A complete system simulation including the PV array, the direct current to direct current (DC-DC) converter and the MPPT is presented and tested using MATLAB software. The simulation results show that the MPPT algorithm works very well with the buck converter, while the boost converter needs further changes and implementation.

  17. Analysis and Comparison of Shading Strategies to Increase Human Thermal Comfort in Urban Areas

    Directory of Open Access Journals (Sweden)

    Ivan Lee

    2018-03-01

    Full Text Available With the expected increase in warmer conditions caused by climate change, heat-related illnesses are becoming a more pressing issue. One way that humans can protect themselves from this is to seek shade. The design of urban spaces can provide individuals with a variety of ways to obtain this shade. The objective of this study was to perform a detailed evaluation and comparison of three shading strategies that could be used in an urban environment: shade from a building, from a tree, and from an umbrella. This was done through using field measurements to calculate the impact of each strategy on a thermal comfort index (Comfort Formula (COMFA in two urban settings during sunny days of the summer of 2013 and 2014 in London, Canada. Building shade was found to be the most effective cooling strategy, followed by the tree strategy and the umbrella strategy. As expected, the main determinant of this ranking was a strategy’s ability to block incoming shortwave radiation. Further analysis indicated that changes in the convective loss of energy and in longwave radiation absorption had a smaller impact that caused variations in the strategy effectiveness between settings. This suggests that under non-sunny days, these rankings could change.

  18. SU-F-T-643: Feasibility of Performing Patient Specific VMAT QA On Single Linac for Plans Treated in Beam-Matched Elekta Agility Linacs

    Energy Technology Data Exchange (ETDEWEB)

    Leung, R; Lee, V; Cheung, S; Lee, K; Law, G; Wong, M; Chan, M; Mun, Tuen [Hospital, Hong Kong (Hong Kong)

    2016-06-15

    Purpose: The increasing application of VMAT demands a more efficient workflow and QA solution. This study aims to investigate the feasibility of performing VMAT QA measurements on one linac for plans treated on other beam-matched Elekta Agility linacs. Methods: A single model was used to create 24 clinically approved VMAT plans (12 head-and-neck and 12 prostate using 6MV and 10MV respectively) on Pinnacle v9.10 (Philips, Einhoven, Netherlands). All head-and-neck plans were delivered on three beam-matched machines while all prostate cases were delivered on two beam-matched 10MV Agility machines. All plans were delivered onto PTW Octavius 4D phantom with 1500 detector array (PTW, Freiburg, Germany). Reconstructed volume doses were then compared with the Pinnacle reference plans in Verisoft 6.1 under 3%/3mm gamma criteria at local dose. Plans were considered clinically acceptable if >90% of the voxels passing the gamma criteria. Results: All measurements were passed (3D gamma passing rate >90%) and the result shows that the mean difference of 3D gamma of 12 head-and-neck cases is 1.2% with standard deviation of 0.6%. While for prostate cases, the mean difference of 3D gamma is 0.9% with standard deviation of 0.7%. Maximum difference of 3D gamma of all measurements between beam-matched machines is less than 2.5%. The differences of passing rates between different machines were statistically insignificant (p>0.05). Conclusion. The result suggests that ther Conclusion: The result suggests that there exists a 3D gamma threshold, in our case 92.5%, above which the VMAT QA performed in any one of beam-matched machine will also pass in another one. Therefore, VMAT QA efficiency may be increased and phantom set up time can be saved by implementing such method. A constant performance across all beam matched machines must be maintained to make this QA approach feasible.

  19. Comparing L*a*b* color coordinates for natural teeth shades and corresponding shade tabs using a spectrophotometer.

    Science.gov (United States)

    Hassel, Alexander J; Doz, Priv; Nitschke, Ina; Rammelsberg, Peter

    2009-01-01

    It was investigated whether L*a*b* values for teeth as well as shade tabs for one 3D-Master shade were similar to one another. Teeth were measured using Vita Easyshade and L*a*b* values and the closest 3D shade was then recorded. The shade-guide tabs were also measured using the same device. 3D-Master shades yielded different L*a*b* values for the teeth than for the tabs. L* and a* values, especially, were systematically different. Therefore, Easyshade L*a*b* values for teeth and tabs could not be directly compared.

  20. Uniform versus asymmetric shading mediates crown recession in conifers.

    Directory of Open Access Journals (Sweden)

    Amanda L Schoonmaker

    Full Text Available In this study we explore the impact of asymmetrical vs. uniform crown shading on the mortality and growth of upper and lower branches within tree crowns, for two conifer species: shade intolerant lodgepole pine (Pinus contorta and shade tolerant white spruce (Picea glauca. We also explore xylem hydraulics, foliar nutrition, and carbohydrate status as drivers for growth and expansion of the lower and upper branches in various types of shading. This study was conducted over a two-year period across 10 regenerating forest sites dominated by lodgepole pine and white spruce, in the lower foothills of Alberta, Canada. Trees were assigned to one of four shading treatments: (1, complete uniform shading of the entire tree, (2 light asymmetric shading where the lower 1/4-1/3 of the tree crown was shaded, (3 heavy asymmetric shading as in (2 except with greater light reduction and (4 control in which no artificial shading occurred and most of the entire crown was exposed to full light. Asymmetrical shading of only the lower crown had a larger negative impact on the bud expansion and growth than did uniform shading, and the effect was stronger in pine relative to spruce. In addition, lower branches in pine also had lower carbon reserves, and reduced xylem-area specific conductivity compared to spruce. For both species, but particularly the pine, the needles of lower branches tended to store less C than upper branches in the asymmetric shade, which could suggest a movement of reserves away from the lower branches. The implications of these findings correspond with the inherent shade tolerance and self-pruning behavior of these conifers and supports a carbon based mechanism for branch mortality--mediated by an asymmetry in light exposure of the crown.

  1. Effect of brand and shade of resin cements on the final color of lithium disilicate ceramic.

    Science.gov (United States)

    Dede, Doğu Ömür; Ceylan, Gözlem; Yilmaz, Burak

    2017-04-01

    Resin cements are available in various shades from different manufacturers. However, there is no standard for the optical properties of these cements, which may result in differences in the color of translucent ceramic restorations. The purpose of this in vitro study was to evaluate the effects of different shades and brands of resin cements on the color of a lithium disilicate ceramic. Ten ceramic disks (11×1.5 mm, shade A2) were fabricated from lithium disilicate high-translucency blocks. Eighty cement disks (11×0.2 mm) were fabricated from 4 brands (Maxcem; Variolink; Clearfil; and RelyX) of resin cements in translucent and universal (shade A2) shades. Color measurements of ceramic specimens were made without (control) and with each brand/shade of resin cement material (test) with a spectrophotometer, and International Commission on Illumination Lab (CIELab) color coordinates were recorded. Color differences (ΔE 00 ) between the control and test groups were calculated. ΔE 00 results were analyzed by 2-way ANOVA and subsequent pairwise testing. Comparisons were performed using the Student t test, and then all P values were corrected with the step-down Bonferroni procedure (α=.05). The effect on the ΔE 00 values (Presin cement materials was significant. Both shades of RelyX cement groups had significantly lower and Variolink_translucent cement group had significantly higher ΔE 00 results than other brands (Pceramic was not visually perceptible (ΔE 00 ≤1.30). Clinically unacceptable results (ΔE 00 >2.25) were observed only for Variolink_translucent cement (2.36). Same-shade resin cements from different manufacturers had different effects on the color of lithium disilicate ceramic. The effects of different shades of resin cements from the same manufacturer on the color of lithium disilicate ceramic were statistically different for only RelyX, which may also be considered clinically different based on clinical acceptability thresholds for color difference

  2. ATOMLLL: atoms with shading and highlights

    International Nuclear Information System (INIS)

    Max, N.L.; y.

    1979-01-01

    The ATOMS program, written at Bell Telephone Laboratory, is capable of determining the visible portions of a scene consisting of interpenetrating spheres and cylinders, put together to represent space-filling or ball-and-stick molecular models. The Lawrence Livermore Laboratory version contains enhancements to add shading and highlights, and to render the spheres on film as ellipses, so they will appear round when projected in various wide-screen formats. The visible parts of each sphere or cylinder are shaded by a minicomputer controlling the film recorder, thus releasing the main computer from transferring the millions of intensity values for each frame. The minicomputer is microprogrammed with an efficient algorithm for the intensities, which uses the color look-up tables in the film recorder to store the reflectance as a function of angle of incidence. 8 references

  3. Implementation of window shading models into dynamic whole-building simulation

    Science.gov (United States)

    Lomanowski, Bartosz Aleksander

    An important consideration in energy efficient building design is the management of solar gain, as it is the largest and most variable gain in a building. The design of buildings with highly glazed facades, as well as decreased energy transfer rates through better insulated and tighter envelopes are causing interior spaces to become highly sensitive to solar gain. Shading devices such as operable slat-type louver blinds are very effective in controlling solar gain, yet their impact on peak cooing loads and annual energy consumption is poorly understood. With the ever-increasing role of building energy simulation tools in the design of energy efficient buildings, there is a clear need to model windows with shading devices to assess their impact on building performance. Recent efforts at the University of Waterloo's Advanced Glazing Systems Laboratory (AGSL) in window shading research have produced a set of flexible shading models. These models were developed with emphasis on generality and computational efficiency, ideally suited for integration into building simulation. The objective of the current research is to develop a complex fenestration facility within a general purpose integrated building simulation software tool, ESP-r, using the AGSL shading models. The strategy for implementation of the AGSL shading models is the addition of a new multi-layer construction within ESP-r, the Complex Fenestration Construction (CFC). The CFC is based on the standard ESP-r multi-layer nodal structure and finite control volume numerical model, with additional measures for coping with the complexities that arise in the solar, convective and radiant exchanges between glazing/shading layers, the interior zone and exterior surroundings. The CFC algorithms process the solar, convective and radiant properties of the glazing/shading system at each time-step, making it possible to add control (e.g., changing the slat angle of a slat-type blind) at the time-step level. Thermal

  4. Combined surface and volumetric occlusion shading

    KAUST Repository

    Schott, Matthias O.

    2012-02-01

    In this paper, a method for interactive direct volume rendering is proposed that computes ambient occlusion effects for visualizations that combine both volumetric and geometric primitives, specifically tube shaped geometric objects representing streamlines, magnetic field lines or DTI fiber tracts. The proposed algorithm extends the recently proposed Directional Occlusion Shading model to allow the rendering of those geometric shapes in combination with a context providing 3D volume, considering mutual occlusion between structures represented by a volume or geometry. © 2012 IEEE.

  5. The effect of irradiance on the carbon balance and tissue characteristics of five herbaceous species differing in shade-tolerance.

    Science.gov (United States)

    Pons, Thijs L; Poorter, Hendrik

    2014-01-01

    with a better C-balance at low irradiance. Under those conditions tolerance to other stresses is probably more important for the performance of shade-tolerant species.

  6. Observation of X-ray shadings in synchrotron radiation-total reflection X-ray fluorescence using a color X-ray camera

    Science.gov (United States)

    Fittschen, Ursula Elisabeth Adriane; Menzel, Magnus; Scharf, Oliver; Radtke, Martin; Reinholz, Uwe; Buzanich, Günther; Lopez, Velma M.; McIntosh, Kathryn; Streli, Christina; Havrilla, George Joseph

    2014-09-01

    Absorption effects and the impact of specimen shape on TXRF analysis has been discussed intensively. Model calculations indicated that ring shaped specimens should give better results in terms of higher counts per mass signals than filled rectangle or circle shaped specimens. One major reason for the difference in signal is shading effects. Full field micro-XRF with a color X-ray camera (CXC) was used to investigate shading, which occurs when working with small angles of excitation as in TXRF. The device allows monitoring the illuminated parts of the sample and the shaded parts at the same time. It is expected that sample material hit first by the primary beam shade material behind it. Using the CXC shading could be directly visualized for the high concentration specimens. In order to compare the experimental results with calculation of the shading effect the generation of controlled specimens is crucial. This was achieved by “drop on demand” technology. It allows generating uniform, microscopic deposits of elements. The experimentally measured shadings match well with those expected from calculation.

  7. The binaural performance of a cross-talk cancellation system with matched or mismatched setup and playback acoustics.

    Science.gov (United States)

    Akeroyd, Michael A; Chambers, John; Bullock, David; Palmer, Alan R; Summerfield, A Quentin; Nelson, Philip A; Gatehouse, Stuart

    2007-02-01

    Cross-talk cancellation is a method for synthesizing virtual auditory space using loudspeakers. One implementation is the "Optimal Source Distribution" technique [T. Takeuchi and P. Nelson, J. Acoust. Soc. Am. 112, 2786-2797 (2002)], in which the audio bandwidth is split across three pairs of loudspeakers, placed at azimuths of +/-90 degrees, +/-15 degrees, and +/-3 degrees, conveying low, mid, and high frequencies, respectively. A computational simulation of this system was developed and verified against measurements made on an acoustic system using a manikin. Both the acoustic system and the simulation gave a wideband average cancellation of almost 25 dB. The simulation showed that when there was a mismatch between the head-related transfer functions used to set up the system and those of the final listener, the cancellation was reduced to an average of 13 dB. Moreover, in this case the binaural interaural time differences and interaural level differences delivered by the simulation of the optimal source distribution (OSD) system often differed from the target values. It is concluded that only when the OSD system is set up with "matched" head-related transfer functions can it deliver accurate binaural cues.

  8. A new topology to mitigate the effect of shading for small photovoltaic installations in rural sub-Saharan Africa

    International Nuclear Information System (INIS)

    Ubisse, A.; Sebitosi, A.

    2009-01-01

    Many field researchers have in the past grappled with the problems of energy loss and panel damage as a result of shading and staining of PV panels after installation. A number of solutions have been proposed to try and minimize the effects of this problem in the field. The problem with all these solutions is that they address inter-panel connection topologies for very large installations. No particular attention has been paid to the topologies of individual panels. In sub-Saharan Africa most installations are single panel solar home systems and therefore small shading can result in an entire installation being disabled. This paper aims to study the effect of shading and staining on photovoltaic modules and propose a new topology that will reduce the effect of shading on the performance of individual photovoltaic modules.

  9. Improved tracking performance of Lagrangian block-matching methodologies using block expansion in the time domain: in silico, phantom and in vivo evaluations.

    Science.gov (United States)

    Albinsson, John; Brorsson, Sofia; Ahlgren, Asa Rydén; Cinthio, Magnus

    2014-10-01

    The aim of this study was to evaluate tracking performance when an extra reference block is added to a basic block-matching method, where the two reference blocks originate from two consecutive ultrasound frames. The use of an extra reference block was evaluated for two putative benefits: (i) an increase in tracking performance while maintaining the size of the reference blocks, evaluated using in silico and phantom cine loops; (ii) a reduction in the size of the reference blocks while maintaining the tracking performance, evaluated using in vivo cine loops of the common carotid artery where the longitudinal movement of the wall was estimated. The results indicated that tracking accuracy improved (mean = 48%, p blocks while maintaining tracking performance (mean = 19%, p < 0.01 [in vivo]). This novel method will facilitate further exploration of the longitudinal movement of the arterial wall. Copyright © 2014 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

  10. Shaded Coffee and Cocoa : Double Dividend for Biodiversity and Small-scale Farmers

    NARCIS (Netherlands)

    Jezeer, Rosalien E.; Verweij, Pita A.; Ferreira Dos Santos, Maria Joao; Boot, René G.A.

    2017-01-01

    This paper compares financial and biodiversity performance of small-scale shaded coffee and cocoa plantations versus intensified conventional ones. We conduct a meta-analysis including 23 studies on coffee and cocoa plantations over a 26 year period. Our results show that, contrary to common

  11. Matching-to-sample performance is better analyzed in terms of a four-term contingency than in terms of a three-term contingency.

    Science.gov (United States)

    Jones, Brent M; Elliffe, Douglas M

    2013-07-01

    Four pigeons performed a simultaneous matching-to-sample (MTS) task involving two samples and two comparisons that differed in their pixel density and luminance. After a long history of reinforcers for correct responses after both samples, 15 conditions arranged either continuous reinforcement of correct responses after Sample 1 and extinction for all responses after Sample 2, or vice versa. The sample after which correct responses were reinforced alternated across successive conditions. The disparity between the samples and the disparity between the comparisons were varied independently across conditions in a quasifactorial design. Contrary to predictions of extant quantitative models, which assume that MTS tasks involve two 3-term contingencies of reinforcement, matching accuracies were not at chance levels in these conditions, comparison-selection ratios differed after the two samples, and effects on matching accuracies of both sample disparity and comparison disparity were observed. These results were, however, consistent with ordinal and sometimes quantitative predictions of Jones' (2003) theory of stimulus and reinforcement effects in MTS tasks. This theory asserts that MTS tasks involve four-term contingencies of reinforcement and that any tendency to select one comparison more often than the other over a set of trials reflects meaningful differences between comparison-discrimination accuracies after the two samples. © Society for the Experimental Analysis of Behavior.

  12. Optimal sun-shading design for enhanced daylight illumination of subtropical classrooms

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Ming-Chin [Architecture and Building Research Institute, MOI (China); Chiang, Che-Ming [Department of Architecture, National Cheng-Kung University, Tainan 701 (China); Chou, Po-Cheng [Department of Interior Design, Shu-Te University, No. 59 Hun-Shan Road, Yenchau 82445, Kaohsiung County (China); Chang, Kuei-Feng [Department of Real Estate Management, National Pingtung Institute of Commerce (China); Lee, Chia-Yen [Department of Mechanical and Automation Engineering, Da-Yeh University, Changhua 515 (China)

    2008-07-01

    This study investigates the feasibility of fitting windows with sun-shadings in order to minimize the lighting power costs in daylight-illuminated classrooms lit from a single side in subtropical regions. An IES-CPC model is created of a representative classroom in Taiwan, and a series of simulations is performed to determine the average illuminance value and the uniformity of the illuminance distribution in the classroom under various lighting conditions with no sun-shadings fitted to the window. The numerical results are found to be in good agreement with the experimental measurements obtained using an array of nine-channel photometers. Having confirmed the validity of the simulation scheme, the illumination properties of four different sun-shading designs are considered. The results show that a double-layered sun-shading represents the optimal sun-shading design in terms of achieving a uniform illumination distribution within the classroom. Given appropriate physical dimensions, this daylight access device achieves the minimum illuminance requirement of 500 lx and improves the lighting uniformity ratio from 0.25-0.35 to 0.40-0.42. Furthermore, using this sun-shading device, the required illuminance ratio of 0.5 can be obtained simply by switching on one of the three rows of lights in the classroom. Accordingly, the daylight access device not only improves the illuminance conditions within the classroom, but also reduces the lighting power cost by 71.5% compared to the case where all of the lights are turned on. (author)

  13. YUCCA auxin biosynthetic genes are required for Arabidopsis shade avoidance

    Directory of Open Access Journals (Sweden)

    Patricia Müller-Moulé

    2016-10-01

    Full Text Available Plants respond to neighbor shade by increasing stem and petiole elongation. Shade, sensed by phytochrome photoreceptors, causes stabilization of PHYTOCHROME INTERACTING FACTOR proteins and subsequent induction of YUCCA auxin biosynthetic genes. To investigate the role of YUCCA genes in phytochrome-mediated elongation, we examined auxin signaling kinetics after an end-of-day far-red (EOD-FR light treatment, and found that an auxin responsive reporter is rapidly induced within 2 hours of far-red exposure. YUCCA2, 5, 8, and 9 are all induced with similar kinetics suggesting that they could act redundantly to control shade-mediated elongation. To test this hypothesis we constructed a yucca2, 5, 8, 9 quadruple mutant and found that the hypocotyl and petiole EOD-FR and shade avoidance responses are completely disrupted. This work shows that YUCCA auxin biosynthetic genes are essential for detectable shade avoidance and that YUCCA genes are important for petiole shade avoidance.

  14. Forage yield and nitrogen nutrition dynamics of warm-season native forage genotypes under two shading levels and in full sunlight

    Directory of Open Access Journals (Sweden)

    Raquel Santiago Barro

    2012-07-01

    Full Text Available The successful achievement of a highly productive understorey pasture in silvopastoral systems depends on the use of well-adapted forage genotypes, showing good agronomic performance and persistence under shading and grazing. In this study, the herbage dry matter yield (DMY and nitrogen nutrition dynamics were determined in three native warm-season grasses (Paspalum regnellii, Paspalum dilatatum and Paspalum notatum and a forage legume (Arachis pintoi under two shading levels compared with full sun. The experiment was conducted in the Campanha region, Bagé, state of Rio Grande do Sul, Brazil, during two evaluation cycles (2008/2009 and 2009/2010. Three shade cloth levels (0%, 50% and 80% of light restriction were applied to the forage genotypes in a split plot design, in which shading levels were the main plot and forage genotypes were the subplots, with three replications. P. regnellii showed the highest accumulated DMY (1500 and 1700 g m-2, respectively, for the first and second evaluation cycles at all shading levels and showed no DMY decreased under the heavy shade (80%. Average DMY over the four genotypes under the 50% shade level was higher or equal compared with full sun. Influence of rainfall was observed on the DMY performance of all genotypes: the positive effect of moderate shading (50% on P. dilatatum and P. notatum DMY was associated to a low soil water availability status. Increased shading level resulted in high nitrogen nutrition index values on grasses, in comparison with full sun. All genotypes performed well under the moderate shading level, but the DMY of both P. regnellii and P. dilatatum and the herbage N content in P. notatum and A. pintoi of all genotypes stood out, showing that those main genotypes are promising to grow in silvopastoral systems at the Campanha region in southern Brazil.

  15. Prospects of using cassava as temporary shade for cocoa in ...

    African Journals Online (AJOL)

    It is being contended that the provision of optimal shade could maximise cocoa production. Four cassava varieties (Manihot spp.) were planted as temporary shade tree in September 1995 at three spacing (1.2 m x 0.6 m; x 1.2 m and 1.2 m x 2.4 m) at Akumadan. The level of shade provided by the canopies and the control ...

  16. Futsal match-related fatigue affects running performance and neuromuscular parameters but not finishing kick speed or accuracy

    DEFF Research Database (Denmark)

    Milioni, Fabio; Vieira, Luiz H P; Barbieri, Ricardo A

    2016-01-01

    performed an incremental protocol to determine maximum oxygen uptake ([Formula: see text]: 50.6 ± 4.9 mL.kg(-1).min(-1)). Next, simulated games were performed, in four periods of 10 min during which heart rate and blood lactate concentration were monitored. The entire games were video recorded...... for subsequent automatic tracking. Before and immediately after the simulated game, neuromuscular function was measured by maximal isometric force of knee extension, voluntary activation using twitch interpolation technique, and electromyographic activity. Before, at half time, and immediately after...... the simulated game, the athletes also performed a set of finishing kicks for ball speed and accuracy measurements. Results: Total distance covered (1st half: 1986.6 ± 74.4 m; 2nd half: 1856.0 ± 129.7 m, P = 0.00) and distance covered per minute (1st half: 103.2 ± 4.4 m.min(-1); 2nd half: 96.4 ± 7.5 m.min(-1), P...

  17. The use of the Thoracic Morbidity and Mortality system for the internal analysis of performance: a case-matched temporal audit.

    Science.gov (United States)

    Salati, Michele; Pompili, Cecilia; Refai, Majed; Xiumè, Francesco; Sabbatini, Armando; Brunelli, Alessandro

    2014-05-01

    The aim of the present study was to evaluate the usefulness of the Thoracic Morbidity and Mortality (TMM) scoring system in auditing the quality of care of our unit. We analysed the performance of our unit comparing the incidence of complications and mortality occurring after anatomic lung resections during two different periods: early period (January 2000 to December 2009: 830 lobectomy, 134 pneumonectomy and 78 segmentectomy) and recent period (January 2010 to August 2012: 191 lobectomy, 8 pneumonectomy and 19 segmentectomy). The cardiopulmonary complications as traditionally defined in the European Society of Thoracic Surgeons (ESTS) database were also classified according to the TMM system: this method grades the postoperative adverse events from 1 to 5 reflecting an increasing severity of management regardless the type of complication. Complications graded higher than 2 are regarded as major complications. To account for confounders, several baseline and surgical factors were used to build a propensity score that was applied to match the patients of the most recent group with their early-group counterparts. These two matched groups were compared in terms of cardiopulmonary morbidity (codified by ESTS definitions) and mortality rates and incidence of major complications according to the TMM system. The propensity score analysis yielded 209 well-matched pairs of patients operated on in the two periods. The two groups had similar rates of ESTS-defined cardiopulmonary complications (recent: 38 patients vs early: 37 patients, P = 0.9). The use of the TMM system revealed a higher incidence of major (grade > 2) complications rate in the recent period (recent: 29 patients vs early: 14 patients, P = 0.02). The TMM scoring system for classifying the postoperative complications revealed a decline of quality of care of our unit otherwise undetected by applying traditional outcome measures. This tool can be used as an additional graded outcome endpoint to refine internal

  18. Colored Height and Shaded Relief, Kamchatka Peninsula

    Science.gov (United States)

    2002-01-01

    Russia's Kamchatka Peninsula, lying between the Sea of Okhotsk to the west and the Bering Sea and Pacific Ocean to the east, is one of the most active volcanic regions along the Pacific Ring of Fire. It covers an area about the size of Colorado but contains more than 100 volcanoes stretching across the 1000-kilometer-long (620-mile-long) land mass. A dozen or more of these have active vents, with the youngest located along the eastern half of the peninsula. This color-coded shaded relief image, generated with data from the Shuttle Radar Topography Mission (SRTM), shows Kamchatka's volcanic nature to dramatic effect.Kliuchevskoi, one of the most active and renowned volcanoes in the world, dominates the main cluster of volcanoes called the Kliuchi group, visible as a circular feature in the center-right of the image. The two other main volcanic ranges lie along northeast-southwest lines, with the older, less active range occupying the center and western half of Kamchatka. The younger, more active belt begins at the southernmost point of the peninsula and continues upward along the Pacific coastline.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction, so northern slopes appear bright and southern slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and brown to white at the highest elevations.The Shuttle Radar Topography Mission flew aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (200

  19. Sinai Peninsula, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    The Sinai Peninsula, located between Africa and Asia, is a result of those two continents pulling apart from each other. Earth's crust is cracking, stretching, and lowering along the two northern branches of the Red Sea, namely the Gulf of Suez, seen here on the west (left), and the Gulf of Aqaba, seen to the east (right). This color-coded shaded relief image shows the triangular nature of the peninsula, with the coast of the Mediterranean Sea forming the northern side of the triangle. The Suez Canal can be seen as the narrow vertical blue line in the upper left connecting the Red Sea to the Mediterranean. The peninsula is divided into three distinct parts; the northern region consisting chiefly of sandstone, plains and hills, the central area dominated by the Tih Plateau, and the mountainous southern region where towering peaks abound. Much of the Sinai is deeply dissected by river valleys, or wadis, that eroded during an earlier geologic period and break the surface of the plateau into a series of detached massifs with a few scattered oases. Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed

  20. Bali, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    The volcanic nature of the island of Bali is evident in this shaded relief image generated with data from the Shuttle Radar Topography Mission (SRTM).Bali, along with several smaller islands, make up one of the 27 Provinces of Indonesia. It lies over a major subduction zone where the Indo-Australian tectonic plate collides with the Sunda plate, creating one of the most volcanically active regions on the planet.The most significant feature on Bali is Gunung Agung, the symmetric, conical mountain at the right-center of the image. This 'stratovolcano,' 3,148 meters (10,308 feet) high, is held sacred in Balinese culture, and last erupted in 1963 after being dormant and thought inactive for 120 years. This violent event resulted in over 1,000 deaths, and coincided with a purification ceremony called Eka Dasa Rudra, meant to restore the balance between nature and man. This most important Balinese rite is held only once per century, and the almost exact correspondence between the beginning of the ceremony and the eruption is though to have great religious significance.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot

  1. OpenGL 4 shading language cookbook

    CERN Document Server

    Wolff, David

    2013-01-01

    OpenGL Shading Language 4 Cookbook is a hands-on guide that gets straight to the point - actually creating graphics, instead of just theoretical learning. Each recipe is specifically tailored to satisfy your appetite for producing real-time 3-D graphics using the latest GLSL specification.This book is for OpenGL programmers looking to use the modern features of GLSL 4 to create real-time, three-dimensional graphics. Familiarity with OpenGL programming, along with the typical 3D coordinate systems, projections, and transformations is assumed. It can also be useful for experienced GLSL programme

  2. Fifty shades of exploitation: Fan labor and Fifty Shades of Grey

    Directory of Open Access Journals (Sweden)

    Bethan Jones

    2014-03-01

    Full Text Available This exploration of the debates that have taken place in fandom over the ethics of pulling fan fiction and publishing it as original work draws on the notion of the fannish gift economy, which postulates that gifts such as fan fiction and fan art have value in the fannish community because they are designed to create and cement its social structure. Tension exists between fans who subscribe to the notion of a fannish gift economy and those who exploit fandom by using it to sell their pulled-to-publish works. An examination of E. L. James's 2012 Fifty Shades trilogy (comprising the books Fifty Shades of Grey, Fifty Shades Darker, and Fifty Shades Freed, which began as Twilight fan fiction, in addition to Twilight fan art sold through sites such as Redbubble and Etsy, demonstrates a tension between the two modes of fan expression: sale of artworks appears to be an acceptable practice in fandom, but the commercial sale of fan fic, even when marketed as original fiction, is widely contested.

  3. Assessment of Color Changes in Vita 3D-Master Shade Guide after Sterilization and Disinfection

    Directory of Open Access Journals (Sweden)

    Hossein Dashti

    2017-06-01

    Full Text Available Purpose:Dental shade guides are commonly used for color determination and should be disinfected and sterilized. The purpose of this study was to evaluate the color change of Vita 3D Master shade tabs after disinfection and sterilization. Material and methods:Overall, 98 samples (shade tabs were randomly selected from 14 new, unused Vita 3D sets, including the following shades: 2M1, 3L1.5, 3M1, 3M2, 3M3, 3R1.5 and 4M1. In each set, values of 2, 3 and 4, chroma of 1, 2 and 3 and hue were selected for the comparison of different shades. All tabs were measured using the Vita Easyshade device at baseline. The first group was disinfected with Deconex and the second group was sterilized by autoclaving in a simulated annual application. All the tabs were measured again using the same device. This process was repeated to simulate 2 and 3 years of usage. Statistical analysis was conducted by repeated measures analysis of variance (ANOVA and independent t-test and paired sample t-test. Results:In the disinfected group, we observed significant differences in value and chroma in all periods (p˂0.001. However, hue showed no significant difference after the first year of simulated treatment (p=0.527, though it was significantly different in the second and third simulations (p˂0.001. In the sterilized group, all variables showed a significant difference for each year (p˂0.05. Considering total color difference (ΔE, there was a significant difference between the two groups in the first, second and third simulated years; ΔE increased in the sterilized group more than in the disinfected samples (p˂0.001.  Conclusions:  The color change of shade tabs was significant both after disinfection by a chemical solution and by sterilization through autoclaving. However, although disinfectants may not have a clinically important effect, sterilization should be considered as an interfering factor during color-matching procedure.

  4. Approaches for Stereo Matching

    Directory of Open Access Journals (Sweden)

    Takouhi Ozanian

    1995-04-01

    Full Text Available This review focuses on the last decade's development of the computational stereopsis for recovering three-dimensional information. The main components of the stereo analysis are exposed: image acquisition and camera modeling, feature selection, feature matching and disparity interpretation. A brief survey is given of the well known feature selection approaches and the estimation parameters for this selection are mentioned. The difficulties in identifying correspondent locations in the two images are explained. Methods as to how effectively to constrain the search for correct solution of the correspondence problem are discussed, as are strategies for the whole matching process. Reasons for the occurrence of matching errors are considered. Some recently proposed approaches, employing new ideas in the modeling of stereo matching in terms of energy minimization, are described. Acknowledging the importance of computation time for real-time applications, special attention is paid to parallelism as a way to achieve the required level of performance. The development of trinocular stereo analysis as an alternative to the conventional binocular one, is described. Finally a classification based on the test images for verification of the stereo matching algorithms, is supplied.

  5. Lactic Acidosis in Diabetic Population: Is Metformin Implicated? Results of a Matched Case-Control Study Performed on the Type 2 Diabetes Population of Grenoble Hospital University.

    Science.gov (United States)

    Lepelley, Marion; Giai, Joris; Yahiaoui, Nassima; Chanoine, Sébastien; Villier, Céline

    2016-01-01

    To evaluate the strength of association between lactic acidosis (LA) and well-recognized risk factors for LA, particularly the weight of metformin. This study is a matched case-control analysis concerning the type 2 diabetes population from Grenoble Hospital University. Cases of LA were defined biologically with pH 5 mmol/L. They were matched to 2 controls defined as type 2 diabetic inpatients who did not present a LA during the study period. We performed a conditional logistic regression. We included 302 cases and 604 controls; mean age was 69.5 years (SD 11.93). Intercurrent diseases were significantly associated with LA. Chronic medical conditions had a minor impact on LA incidence, except hepatocellular dysfunction. Metformin was significantly associated with a higher LA probability in case of acute kidney injury (AKI) (OR = 1.79; p value = 0.020) but not in patients without AKI. According to this study, metformin, compared to acute medical conditions, seemed not to be associated with LA in patients with type 2 diabetes; however in case of AKI, metformin may be associated with LA.

  6. Safety Analysis of Solar Module under Partial Shading

    Directory of Open Access Journals (Sweden)

    Wei He

    2015-01-01

    Full Text Available Hot spot often occurs in a module when the qualities of solar cells mismatch and bypass diodes are proved to be an efficient alternative to reduce the effect of hot spot. However, these principles choosing a diode are based on the parameters of bypass diodes and PV cells without consideration of the maximum heating power of the shaded cell, which may cause serious consequences. On this basis, this paper presents a new approach to investigate partially shaded cells in different numbers of PV cells and different shading scenarios, including inhomogeneous illumination among solar cells and incomplete shading in one cell, which innovatively combines the same cells or divides one affected cell into many small single cells and then combines the same ones, and analyzes the shaded cell. The results indicate that the maximum power dissipation of the shaded cell occurs at short-circuit conditions. With the number of solar cells increasing, the shaded cell transfers from generating power to dissipating power and there is a maximum point of power dissipation in different shading situations that may lead to severe hot spot. Adding up the heat converted from solar energy, the heating power can be higher. In this case, some improvements about bypass diodes are proposed to reduce hot spot.

  7. Growth and morphogenesis of sun and shade plants

    NARCIS (Netherlands)

    Corre, W.J.

    1984-01-01

    A number of species of sun and shade plants in the vegetative phase were grown in different light intensities, different light qualities (r/fr ratio) and different combinations of light intensity and nutrient supply. Sun and shade species were also grown at various plant densities and in

  8. AVIAN RESOURCE USE IN DOMINICAN SHADE COFFEE PLANTATIONS

    Science.gov (United States)

    JOSEPH M. WUNDERLE. JR; STEVEN C. LATTAA

    1998-01-01

    We quantified foraging behavior of 19 bird species in shade coffee plantations in the Dominican Republic to document and evaluate their use of food resources in the shade overstory relative to the coffee understory. All species were observed foraging in the Znga “era overstory, and 18 of the 19 species had median foraging heights significantly above the median maximum...

  9. Socioeconomic benefits of shade trees in coffee production systems ...

    African Journals Online (AJOL)

    The respondents had excellent knowledge on socioeconomic benefits of shade tree species. However, organic training is believed to minimize knowledge gaps on certain complex and/or unobservable ecosystem processes in the shaded coffee systems to boost the confidence of the farmers in supplying green commodities ...

  10. Solar Shading System Based on Daylight Directing Glass Lamellas

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Santos, Inês; Svendsen, Svend

    2008-01-01

    The overheating problems in office buildings must be solved with efficient solar shadings in order to reduce the energy demand for cooling and ventilation. At the same time the solar shading should not reduce the daylight level in the building on overcast days because it would result in a lower...

  11. Shade tree selection and management practices by farmers in ...

    African Journals Online (AJOL)

    There is a traditional practice of forest management in coffee producing communities in Ethiopian moist Afromontane forests to increase coffee production. The practice involves removal of big canopy trees with excessive shade and selectively retaining specific tree species as preferred shade trees. This study was initiated ...

  12. Difference in shade tolerance affects foliage–sapwood response to ...

    African Journals Online (AJOL)

    Difference in shade tolerance affects foliage–sapwood response to thinning by two eucalypts. Rui Ling Yao, Kevin Glencross, J Doland Nichols. Abstract. In eucalypt plantations in subtropical Australia, Eucalyptus dunnii exhibits greater diameter increment after thinning than more shade-tolerant Corymbia citriodora.

  13. Influence of shading on container-grown flowering dogwoods

    Science.gov (United States)

    Bare root dogwoods can be successfully grown when transplanted into a container production system. Shade treatments regardless of color or density did have an effect on the plant growth of Cherokee Brave™ and Cherokee Princess dogwood. Plants grown under 50% black and 50% white shade had more heigh...

  14. Damage in Monolithic Thin-Film Photovoltaic Modules Due to Partial Shade

    Energy Technology Data Exchange (ETDEWEB)

    Silverman, Timothy J.; Mansfield, Lorelle; Repins, Ingrid; Kurtz, Sarah

    2016-09-01

    The typical configuration of monolithic thin-film photovoltaic modules makes it possible for partial shade to place one or more cells in such a module in reverse bias. Reverse bias operation leads to high voltage, current density, and power density conditions, which can act as driving forces for failure. We showed that a brief outdoor shadow event can cause a 7% permanent loss in power. We applied an indoor partial shade durability test that moves beyond the standard hot spot endurance test by using more realistic mask and bias conditions and by carefully quantifying the permanent change in performance due to the stress. With the addition of a pass criterion based on change in maximum power, this procedure will soon be proposed as a part of the module-type qualification test. All six commercial copper indium gallium diselenide and cadmium telluride modules we tested experienced permanent damage due to the indoor partial shade test, ranging from 4% to 14% loss in maximum power. We conclude by summarizing ways to mitigate partial shade stress at the cell, module, and system levels.

  15. Initial development and gas exchange of Talisia subalbens (Mart. Radlk. under different shading conditions

    Directory of Open Access Journals (Sweden)

    Fernanda Carlota Nery

    2011-02-01

    Full Text Available Ecophysiological studies under semi-controlled conditions in nurseries and greenhouses are essential to enable the use of native species to recover degraded areas and for commercial planting. Talisia subalbens (Mart Radlk, 'cascudo', is a native fruiting species of the Cerrado on the verge of extinction. The ecophysiological performance of this species was evaluated in nursery conditions under different levels of shading (full sunshine, 30%, 50% and 70%. Initial growth, biomass allocation, gas exchange and chlorophyll content of the plants were analyzed. Full sunshine cultivated plants showed a higher accumulation of total, shoot, and root dry biomass. There was no significant difference in the root/shoot ratio among the treatments. Seedlings cultivated under full sunshine and 30% shading showed higher values for height, basal diameter, and leaf area. Differences in stomata conductance and photosynthesis rate were not observed among the different shading levels. Plants cultivated under 70% of shading had higher contents of chlorophyll a, b, and total. During the initial phase with higher levels of radiation were fundamental for the development of T. subalbens seedlings.

  16. Ecosystem Service of Shade Trees on Nutrient Cycling and Productivity of Coffee Agro-ecosystems

    OpenAIRE

    Rusdi Evizal; Tohari Tohari; Irfan D. Prijambada; Jaka Widada; Donny Widianto

    2009-01-01

    Shade trees are significant in certification scheme of sustainable coffee production. They play an importance role on ecosystem functioning. This research is aimed to study ecosystem service of shade trees in some coffee agro-ecosystems particularly on nutrient cycling and land productivity. Four agro-ecosys tems of Robusta coffee (Coffea canephora), namely sun coffee (without shade trees), coffee shaded by Michelia champaca, coffee shaded by Gliricidia sepium, and coffee shaded by Erythrina ...

  17. Colored Height and Shaded Relief, Central America

    Science.gov (United States)

    2002-01-01

    Panama, Costa Rica, Nicaragua, El Salvador, Honduras, Guatemala, Belize, southern Mexico and parts of Cuba and Jamaica are all seen in this image from NASA's Shuttle Radar Topography Mission. The dominant feature of the northern part of Central America is the Sierra Madre Range, spreading east from Mexico between the narrow Pacific coastal plain and the limestone lowland of the Yucatan Peninsula. Parallel hill ranges sweep across Honduras and extend south, past the Caribbean Mosquito Coast to lakes Managua and Nicaragua. The Cordillera Central rises to the south, gradually descending to Lake Gatun and the Isthmus of Panama. A highly active volcanic belt runs along the Pacific seaboard from Mexico to Costa Rica.High-quality satellite imagery of Central America has, until now, been difficult to obtain due to persistent cloud cover in this region of the world. The ability of SRTM to penetrate clouds and make three-dimensional measurements has allowed the generation of the first complete high-resolution topographic map of the entire region. This map was used to generate the image.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations.For an annotated version of this image, please select Figure 1, below: [figure removed for brevity, see original site] (Large image: 9 mB jpeg)Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect

  18. World Globes, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    These images of the world were generated with data from the Shuttle Radar Topography Mission (SRTM). The SRTM Project has recently released a new global data set called SRTM30, where the original one arcsecond of latitude and longitude resolution (about 30 meters, or 98 feet, at the equator) was reduced to 30 arcseconds (about 928 meters, or 1496 feet.) These images were created from that data set and show the Earth as it would be viewed from a point in space centered over the Americas, Africa and the western Pacific.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise,Washington, D.C.Orientation: North toward the top Image Data: shaded and colored SRTM elevation model Original Data Resolution: SRTM 1 arcsecond (about 30 meters or 98 feet

  19. Shaded Relief of Rio Sao Francisco, Brazil

    Science.gov (United States)

    2000-01-01

    This topographic image acquired by SRTM shows an area south of the Sao Francisco River in Brazil. The scrub forest terrain shows relief of about 400 meters (1300 feet). Areas such as these are difficult to map by traditional methods because of frequent cloud cover and local inaccessibility. This region has little topographic relief, but even subtle changes in topography have far-reaching effects on regional ecosystems. The image covers an area of 57 km x 79 km and represents one quarter of the 225 km SRTM swath. Colors range from dark blue at water level to white and brown at hill tops. The terrain features that are clearly visible in this image include tributaries of the Sao Francisco, the dark-blue branch-like features visible from top right to bottom left, and on the left edge of the image, and hills rising up from the valley floor. The San Francisco River is a major source of water for irrigation and hydroelectric power. Mapping such regions will allow scientists to better understand the relationships between flooding cycles, forestation and human influences on ecosystems.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200

  20. Ireland, Shaded Relief and Colored Height

    Science.gov (United States)

    2005-01-01

    The island of Ireland comprises a large central lowland of limestone with a relief of hills surrounded by a discontinuous border of coastal mountains which vary greatly in geological structure. The mountain ridges of the south are composed of old red sandstone separated by limestone river valleys. Granite predominates in the mountains of Galway, Mayo and Donegal in the west and north-west and in Counties Down and Wicklow on the east coast, while a basalt plateau covers much of the north-east of the country. The central plain, which is broken in places by low hills, is extensively covered with glacial deposits of clay and sand. It has considerable areas of bog and numerous lakes. The island has seen at least two general glaciations and everywhere ice-smoothed rock, mountain lakes, glacial valleys and deposits of glacial sand, gravel and clay mark the passage of the ice. Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Geospatial-Intelligence Agency

  1. Effects of carbohydrate-hydration strategies on glucose metabolism, sprint performance and hydration during a soccer match simulation in recreational players.

    Science.gov (United States)

    Kingsley, Michael; Penas-Ruiz, Carlos; Terry, Chris; Russell, Mark

    2014-03-01

    This study compared the effects of three carbohydrate-hydration strategies on blood glucose concentration, exercise performance and hydration status throughout simulated soccer match-play. A randomized, double-blind and cross-over study design was employed. After familiarization, 14 recreational soccer players completed the soccer match simulation on three separate occasions. Participants consumed equal volumes of 9.6% carbohydrate-caffeine-electrolyte (∼ 6 mg/kg BW caffeine) solution with carbohydrate-electrolyte gels (H-CHO), 5.6% carbohydrate-electrolyte solution with electrolyte gels (CHO) or electrolyte solution and electrolyte gels (PL). Blood samples were taken at rest, immediately before exercise and every 15 min during exercise (first half: 15, 30, 45 min; second half: 60, 75, 90 min). Supplementation influenced blood glucose concentration (time × treatment interaction: p<0.001); however, none of the supplementation regimes were effective in preventing a drop in blood glucose at 60 min. Mean sprint speed was 3 ± 1% faster in H-CHO when compared with PL (treatment: p=0.047). Supplementation caused a 2.3 ± 0.5% increase in plasma osmolality in H-CHO (p<0.001) without change in CHO or PL. Similarly, mean sodium concentrations were 2.1 ± 0.4% higher in H-CHO when compared with PL (p=0.006). Combining high carbohydrate availability with caffeine resulted in improved sprint performance and elevated blood glucose concentrations throughout the first half and at 90 min of exercise; however, this supplementation strategy negatively influenced hydration status when compared with 5.6% carbohydrate-electrolyte and electrolyte solutions. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  2. Olduvai Gorge, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    Three striking and important areas of Tanzania in eastern Africa are shown in this color-coded shaded relief image from the Shuttle Radar Topography Mission. The largest circular feature in the center right is the caldera, or central crater, of the extinct volcano Ngorongoro. It is surrounded by a number of smaller volcanoes, all associated with the Great Rift Valley, a geologic fault system that extends for about 4,830 kilometers (2,995 miles) from Syria to central Mozambique. Ngorongoro's caldera is 22.5 kilometers (14 miles) across at its widest point and is 610 meters (2,000 feet) deep. Its floor is very level, holding a lake fed by streams running down the caldera wall. It is part of the Ngorongoro Conservation Area and is home to over 75,000 animals. The lakes south of the crater are Lake Eyasi and Lake Manyara, also part of the conservation area. The relatively smooth region in the upper left of the image is the Serengeti National Park, the largest in Tanzania. The park encompasses the main part of the Serengeti ecosystem, supporting the greatest remaining concentration of plains game in Africa including more than 3,000,000 large mammals. The animals roam the park freely and in the spectacular migrations, huge herds of wild animals move to other areas of the park in search of greener grazing grounds (requiring over 4,000 tons of grass each day) and water. The faint, nearly horizontal line near the center of the image is Olduvai Gorge, made famous by the discovery of remains of the earliest humans to exist. Between 1.9 and 1.2 million years ago a salt lake occupied this area, followed by the appearance of fresh water streams and small ponds. Exposed deposits show rich fossil fauna, many hominid remains and items belonging to one of the oldest stone tool technologies, called Olduwan. The time span of the objects recovered dates from 2,100,000 to 15,000 years ago. Two visualization methods were combined to produce the image: shading and color coding of

  3. Discrete Line Congruences for Shading and Lighting

    KAUST Repository

    Wang, Jun

    2013-07-01

    Two-parameter families of straight lines (line congruences) are implicitly present in graphics and geometry processing in several important ways including lighting and shape analysis. In this paper we make them accessible to optimization and geometric computing, by introducing a general discrete version of congruences based on piecewise-linear correspondences between triangle meshes. Our applications of congruences are based on the extraction of a so-called torsion-free support structure, which is a procedure analogous to remeshing a surface along its principal curvature lines. A particular application of such structures are freeform shading and lighting systems for architecture. We combine interactive design of such systems with global optimization in order to satisfy geometric constraints. In this way we explore a new area where architecture can greatly benefit from graphics.

  4. The effect of repeated firings on the color of an alumina ceramic system with two different veneering porcelain shades.

    Science.gov (United States)

    Sahin, V; Uludag, B; Usumez, A; Ozkir, S E

    2010-12-01

    Possible sources of processing variables in porcelain firing include thickness and color of the opaque; thickness, color, and translucency of the body and enamel layers; firing temperature; and number of firings. The purpose of this in vitro study was to investigate the color changes of an alumina ceramic system veneered with different veneering porcelain shades and fired different numbers of times. Twenty disc-shaped ceramic specimens (10 mm in diameter, with a core thickness of 1 mm), with 2 different veneering porcelain shades (A1, A3), were fabricated from an alumina ceramic system (Turkom-Cera) (n=10). Repeated firings (3, 5, 7, or 9 firings) were performed, and color differences (ΔE) were determined using a spectrophotometer. Repeated-measures ANOVA was used to analyze the data (number of firings, veneering porcelain color). The Duncan test and paired 2-tailed tests were used for multiple comparisons (α=.05). The L*a*b* values of the ceramic system were affected by the number of firings (3, 5, 7, or 9) (Pveneering porcelain shade (Pveneering porcelain shade for L* (P=.002), a* (P=.001), and b* (P=.001) values. A1 shade specimens maintained their L* value independent of the number of firings, whereas A3 shade specimens became lighter after an increased number of firings. For both A1 and A3 veneering porcelain shades, the a* value decreased after repeated firings, which resulted in less reddish specimens, and the b* value decreased after repeated firings, which resulted in less yellowish specimens. Imperceptible (ΔE<1.6) and clinically acceptable color changes (ΔE<3.7) were demonstrated by the alumina ceramic system tested. Copyright © 2010 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  5. Sombra artificial e método de fornecimento de concentrado no comportamento e desempenho de bezerros desmamados - doi: 10.4025/actascianimsci.v33i4.10672 Artificial shade and method of concentrate supply in behavior and in performance of calves - doi: 10.4025/actascianimsci.v33i4.10672

    Directory of Open Access Journals (Sweden)

    Geraldo Tadeus dos Santos

    2011-09-01

    Full Text Available Foram avaliados o comportamento, as variáveis fisiológicas e o desempenho de bezerros Holandês e mestiços desmamados em diferentes telas de polipropileno e horas de fornecimento de concentrado. Utilizaram-se 24 bezerros, nove da raça Holandesa (H e 15 mestiços de Holandês (MH, em piquetes parcialmente cobertos com tela de polipropileno com malha de 70 (S70 e 40% (S40 de sombra, recebendo concentrado em três horários: manhã (M, tarde (T e dias alternados (DA. Os comportamentos comendo e ruminando deitado foram, respectivamente, mais frequentes no ambiente S70 (34,29 e 11,40% do que no ambiente S40 (30,18 e 6,76%, indicando maior conforto térmico. Os comportamentos ruminando em pé e em pé foram, respectivamente, mais frequentes no ambiente S40 (6,42 e 40,25% do que no ambiente S70 (5,24 e 31,18%. A temperatura da superfície do pelame apresentou maior valor no ambiente S40 para os animais H (33,87ºC e MH (33,69ºC, principalmente nas horas mais quentes do dia, quando a radiação solar era maior. A frequência respiratória foi maior para os animais H tanto no ambiente S40 (55,66 mov. min.-1 quanto no ambiente S70 (60,98 mov. min.-1. O ganho de peso médio diário não variou conforme o fornecimento de ração, de sombra e entre grupos genéticosIt was evaluated the behavior, the physiological variables and the performance of Holstein calves and crossbred calves weaned using different shade screens and hours of concentrate supplying. There were used nine Holstein calves (H and 15 crossbred Holstein calves (MH, housed on partially covered paddocks with a polypropylene screen (shade with a loop of 70% of shadow (S70 and 40% (S40 receiving concentrate at three times: morning (M, afternoon (A and alternate days (AD. The behaviors eating and ruminating lying were, respectively, more frequent on the environment S70 (34.29 and 11.40% than on the environment S40 (30.18 and 6.76%, showing greater termical comfort for calves. The behaviors

  6. Matching score based face recognition

    NARCIS (Netherlands)

    Boom, B.J.; Beumer, G.M.; Spreeuwers, Lieuwe Jan; Veldhuis, Raymond N.J.

    2006-01-01

    Accurate face registration is of vital importance to the performance of a face recognition algorithm. We propose a new method: matching score based face registration, which searches for optimal alignment by maximizing the matching score output of a classifier as a function of the different

  7. Improved grazing activity of dairy heifers in shaded tropical grasslands

    Directory of Open Access Journals (Sweden)

    Andréia Cristina Tavares de Mello

    Full Text Available ABSTRACT: Trees in the production systems can effectively reduce hot weather-induced stress in the Brazilian Midwest. High temperatures cause changes in animals daily routine, and trees into pastures can promote benefits. The aim of this research was to evaluate the behavior of dairy heifers in silvopastoral systems in the state of Mato Grosso, Brazil. A herd of 24 crossbreed heifers (3/4 and 7/8 Holstein/Zebu, 350kg average weight, was evaluated over three seasons. Piatã grass was managed under three shade levels: full-sun, moderate-shade, and intensive-shade provided by 10 to 12m high Eucalyptus trees. Behavior data were collected every 15 minutes from 8:30h to 16h. Shade availability significantly impacted heifer behavior, mainly affecting grazing frequency and time during the hottest hours. Grazing behavior was affected by shade levels during the different seasons. Heifers showed preferred grazing times. Heifers in the intensive-shade system visited shady areas during the hottest hours throughout the seasons. Heifers in the full sun-system avoided grazing during the warmer times, ceasing feeding activities. Our results from the Brazilian Midwest showed that shade availability causes breed heifers to change their daily routine.

  8. Factorized Graph Matching.

    Science.gov (United States)

    Zhou, Feng; de la Torre, Fernando

    2015-11-19

    Graph matching (GM) is a fundamental problem in computer science, and it plays a central role to solve correspondence problems in computer vision. GM problems that incorporate pairwise constraints can be formulated as a quadratic assignment problem (QAP). Although widely used, solving the correspondence problem through GM has two main limitations: (1) the QAP is NP-hard and difficult to approximate; (2) GM algorithms do not incorporate geometric constraints between nodes that are natural in computer vision problems. To address aforementioned problems, this paper proposes factorized graph matching (FGM). FGM factorizes the large pairwise affinity matrix into smaller matrices that encode the local structure of each graph and the pairwise affinity between edges. Four are the benefits that follow from this factorization: (1) There is no need to compute the costly (in space and time) pairwise affinity matrix; (2) The factorization allows the use of a path-following optimization algorithm, that leads to improved optimization strategies and matching performance; (3) Given the factorization, it becomes straight-forward to incorporate geometric transformations (rigid and non-rigid) to the GM problem. (4) Using a matrix formulation for the GM problem and the factorization, it is easy to reveal commonalities and differences between different GM methods. The factorization also provides a clean connection with other matching algorithms such as iterative closest point; Experimental results on synthetic and real databases illustrate how FGM outperforms state-of-the-art algorithms for GM. The code is available at http://humansensing.cs.cmu.edu/fgm.

  9. Matched-Filter Thermography

    Directory of Open Access Journals (Sweden)

    Nima Tabatabaei

    2018-04-01

    Full Text Available Conventional infrared thermography techniques, including pulsed and lock-in thermography, have shown great potential for non-destructive evaluation of broad spectrum of materials, spanning from metals to polymers to biological tissues. However, performance of these techniques is often limited due to the diffuse nature of thermal wave fields, resulting in an inherent compromise between inspection depth and depth resolution. Recently, matched-filter thermography has been introduced as a means for overcoming this classic limitation to enable depth-resolved subsurface thermal imaging and improving axial/depth resolution. This paper reviews the basic principles and experimental results of matched-filter thermography: first, mathematical and signal processing concepts related to matched-fileting and pulse compression are discussed. Next, theoretical modeling of thermal-wave responses to matched-filter thermography using two categories of pulse compression techniques (linear frequency modulation and binary phase coding are reviewed. Key experimental results from literature demonstrating the maintenance of axial resolution while inspecting deep into opaque and turbid media are also presented and discussed. Finally, the concept of thermal coherence tomography for deconvolution of thermal responses of axially superposed sources and creation of depth-selective images in a diffusion-wave field is reviewed.

  10. The shade avoidance syndrome in Arabidopsis: the antagonistic role of phytochrome a and B differentiates vegetation proximity and canopy shade.

    Directory of Open Access Journals (Sweden)

    Jaime F Martínez-García

    Full Text Available Light limitation caused by dense vegetation is one of the greatest threats to plant survival in natural environments. Plants detect such neighboring vegetation as a reduction in the red to far-red ratio (R:FR of the incoming light. The low R:FR signal, perceived by phytochromes, initiates a set of responses collectively known as the shade avoidance syndrome, intended to reduce the degree of current or future shade from neighbors by overtopping such competitors or inducing flowering to ensure seed production. At the seedling stage these responses include increased hypocotyl elongation. We have systematically analyzed the Arabidopsis seedling response and the contribution of phyA and phyB to perception of decreased R:FR, at three different levels of photosynthetically active radiation. Our results show that the shade avoidance syndrome, induced by phyB deactivation, is gradually antagonized by phyA, operating through the so-called FR-High Irradiance Response, in response to high FR levels in a range that simulates plant canopy shade. The data indicate that the R:FR signal distinguishes between the presence of proximal, but non-shading, neighbors and direct foliar shade, via a intrafamily photosensory attenuation mechanism that acts to suppress excessive reversion toward skotomorphogenic development under prolonged direct vegetation shade.

  11. The shade avoidance syndrome in Arabidopsis: the antagonistic role of phytochrome a and B differentiates vegetation proximity and canopy shade.

    Science.gov (United States)

    Martínez-García, Jaime F; Gallemí, Marçal; Molina-Contreras, María José; Llorente, Briardo; Bevilaqua, Maycon R R; Quail, Peter H

    2014-01-01

    Light limitation caused by dense vegetation is one of the greatest threats to plant survival in natural environments. Plants detect such neighboring vegetation as a reduction in the red to far-red ratio (R:FR) of the incoming light. The low R:FR signal, perceived by phytochromes, initiates a set of responses collectively known as the shade avoidance syndrome, intended to reduce the degree of current or future shade from neighbors by overtopping such competitors or inducing flowering to ensure seed production. At the seedling stage these responses include increased hypocotyl elongation. We have systematically analyzed the Arabidopsis seedling response and the contribution of phyA and phyB to perception of decreased R:FR, at three different levels of photosynthetically active radiation. Our results show that the shade avoidance syndrome, induced by phyB deactivation, is gradually antagonized by phyA, operating through the so-called FR-High Irradiance Response, in response to high FR levels in a range that simulates plant canopy shade. The data indicate that the R:FR signal distinguishes between the presence of proximal, but non-shading, neighbors and direct foliar shade, via a intrafamily photosensory attenuation mechanism that acts to suppress excessive reversion toward skotomorphogenic development under prolonged direct vegetation shade.

  12. A Study on Possibility of Clinical Application for Color Measurements of Shade Guides Using an Intraoral Digital Scanner.

    Science.gov (United States)

    Yoon, Hyung-In; Bae, Ji-Won; Park, Ji-Man; Chun, Youn-Sic; Kim, Mi-Ae; Kim, Minji

    2016-11-07

    To assess if color measurement with intraoral scanner correlates with digital colorimeter and to evaluate the possibility of application of a digital scanner for shade selection. The L*a*b* values of the five shade tabs (A1, A2, A3, A3.5, and A4) were obtained with an intraoral scanner (TRIOS Pod) and a colorimeter (ShadeEye). Both devices were calibrated according to the manufacturer's instructions before measurements. Color measurement values were compared with paired t-test, and a Pearson's correlation analysis was performed to evaluate the relationship of two methods. The L*a*b* values of the colorimeter were significantly different from those of the digital scanner (p < 0.001). The L* and b* values of both methods were strongly correlated with each other (both p < 0.05). The device repeatability in both methods were reported to be excellent (p < 0.05). Within the limitations of this study, color measurements with digital intraoral scanners and computer-assisted image analysis were in accordance with those of the colorimeter with respect to L* and b* values; however, all the coordinates of shade tabs were significantly different between two methods. The digital intraoral scanner may not be used as the primary method of color selection in clinical practices, considering significant differences in color parameters with colorimeter. The scanner's capability in shade selection should be further evaluated. © 2016 by the American College of Prosthodontists.

  13. Efficient line matching with homography

    Science.gov (United States)

    Shen, Yan; Dai, Yuxing; Zhu, Zhiliang

    2018-03-01

    In this paper, we propose a novel approach to line matching based on homography. The basic idea is to use cheaply obtainable matched points to boost the similarity between two images. Two types of homography method, which are estimated by direct linear transformation, transform images and extract their similar parts, laying a foundation for the use of optical flow tracking. The merit of the similarity is that rapid matching can be achieved by regionalizing line segments and local searching. For multiple homography estimation that can perform better than one global homography, we introduced the rank-one modification method of singular value decomposition to reduce the computation cost. The proposed approach results in point-to-point matches, which can be utilized with state-of-the-art point-match-based structures from motion (SfM) frameworks seamlessly. The outstanding performance and feasible robustness of our approach are demonstrated in this paper.

  14. France, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    This image of France was generated with data from the Shuttle Radar Topography Mission (SRTM). For this broad view the resolution of the data was reduced to 6 arcseconds (about 185 meters north-south and 127 meters east-west), resampled to a Mercator projection, and the French border outlined. Even at this decreased resolution the variety of landforms comprising the country is readily apparent.The upper central part of this scene is dominated by the Paris Basin, which consists of a layered sequence of sedimentary rocks. Fertile soils over much of the area make good agricultural land. The Normandie coast to the upper left is characterized by high, chalk cliffs, while the Brittany coast (the peninsula to the left) is highly indented where deep valleys were drowned by the sea, and the Biscay coast to the southwest is marked by flat, sandy beaches.To the south, the Pyrenees form a natural border between France and Spain, and the south-central part of the country is dominated by the ancient Massif Central. Subject to volcanism that has only subsided in the last 10,000 years, these central mountains are separated from the Alps by the north-south trending Rhone River Basin.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D

  15. Australia, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    Australia is the world's smallest, flattest, and (after Antarctica) driest continent, but at 7.7 million square kilometers (3.0 million square miles) it is also the sixth largest country. Its low average elevation (300 meters, or less than 1000 feet) is caused by its position near the center of a tectonic plate, where there are no volcanic or other geologic forces of the type that raise the topography of other continents. In fact Australia is the only continent without any current volcanic activity at all - the last eruption took place 1400 years ago at Mt. Gambier. The Australian continent is also one of the oldest land masses, with some of its erosion-exposed bedrock age dated at more than 3 billion years. More than one-fifth of the land area is desert, with more than two-thirds being classified as arid or semi-arid and unsuitable for settlement. The coldest regions are in the highlands and tablelands of Tasmania and the Australian Alps at the southeastern corner of the continent, location of Australia's highest point, Mt. Kosciusko (2228 meters, or 7310 feet.) Prominent features of Australia include the Lake Eyre basin, the darker green region visible in the center-right. At 16 meters (52 feet) below sea level this depression is one of the largest inland drainage systems in the world, covering more than 1.3 million square kilometers (500,000 square miles). The mountain range near the east coast is called the Great Dividing Range, forming a watershed between east and west flowing rivers. Erosion has created deep valleys, gorges and waterfalls in this range where rivers tumble over escarpments on their way to the sea. The crescent shaped uniform green region in the south, just left of center, is the Nullarbor Plain, a low-lying limestone plateau which is so flat that the Trans-Australian Railway runs through it in a straight line for more than 483 kilometers (300 miles). Two visualization methods were combined to produce this image: shading and color coding of

  16. PULSE: Integrated Parametric Modeling for a Shading System: From Daylight Optimization to Additive Manufacturing

    OpenAIRE

    Teeling, M.V.M.T.; Turrin, M.; de Ruiter, P.; Turrin, Michela; Peters, Brady; O'Brien, William; Stouffs, Rudi; Dogan, Timur

    2017-01-01

    This paper presents a parametric approach to an integrated and performance-oriented design, from the conceptual design phase towards materialization. The novelty occurs in the use of parametric models as a way of integrating multidisciplinary design constraints, from daylight optimization to the additive manufacturing process. The work focuses on the case of a customized sun-shading system that tailors daylighting effects for a fully glazed façade of the alleged PULSE building.The overall wor...

  17. 29 CFR 780.505 - Definition of “shade-grown tobacco.”

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Definition of âshade-grown tobacco.â 780.505 Section 780... Employment or Agricultural Employees in Processing Shade-Grown Tobacco; Exemption From Minimum Wage and Overtime Pay Requirements Under Section 13(a)(14) Shade-Grown Tobacco § 780.505 Definition of “shade-grown...

  18. Fine Root Abundance and Dynamics of Stone Pine (Pinus cembra) at the Alpine Treeline Is Not Impaired by Self-shading

    OpenAIRE

    Kubisch, Petra; Leuschner, Christoph; Coners, Heinz; Gruber, Andreas; Hertel, Dietrich

    2017-01-01

    Low temperatures are crucial for the formation of the alpine treeline worldwide. Since soil temperature in the shade of tree canopies is lower than in open sites, it was assumed that self-shading may impair the trees’ root growth performance. While experiments with tree saplings demonstrate root growth impairment at soil temperatures below 5–7 C, field studies exploring the soil temperature – root growth relationship at the treeline are missing. We recorded soil temperature and...

  19. On the Impact of Partial Shading on PV Output Power

    DEFF Research Database (Denmark)

    Sera, Dezso; Baghzouz, Yahia

    2008-01-01

    It is a well-documented fact that partial shading of a photovoltaic array reduces it output power capability. However, the relative amount of such degradation in energy production cannot be determined in a straight forward manner, as it is often not proportional to the shaded area. This paper...... is illustrated by measurements on a commercial 70 W panel, and a 14.4 kW PV array....

  20. Patterns of shading tolerance determined from experimental ...

    Science.gov (United States)

    An extensive review of the experimental literature on seagrass shading evaluated the relationship between experimental light reductions, duration of experiment and seagrass response metrics to determine whether there were consistent statistical patterns. There were highly significant linear relationships of both percent biomass and percent shoot density reduction versus percent light reduction (versus controls), although unexplained variation in the data were high. Duration of exposure affected extent of response for both metrics, but was more clearly a factor in biomass response. Both biomass and shoot density showed linear responses to duration of light reduction for treatments 60%. Unexplained variation was again high, and greater for shoot density than biomass. With few exceptions, regressions of both biomass and shoot density on light reduction for individual species and for genera were statistically significant, but also tended to show high degrees of variability in data. Multivariate regressions that included both percent light reduction and duration of reduction as dependent variables increased the percentage of variation explained in almost every case. Analysis of response data by seagrass life history category (Colonizing, Opportunistic, Persistent) did not yield clearly separate response relationships in most cases. Biomass tended to show somewhat less variation in response to light reduction than shoot density, and of the two, may be the prefe

  1. Shade Effects on the Dispersal of Airborne Hemileia vastatrix Uredospores.

    Science.gov (United States)

    Boudrot, Audrey; Pico, Jimmy; Merle, Isabelle; Granados, Eduardo; Vílchez, Sergio; Tixier, Philippe; Filho, Elías de Melo Virginio; Casanoves, Fernando; Tapia, Ana; Allinne, Clémentine; Rice, Robert A; Avelino, Jacques

    2016-06-01

    Hemileia vastatrix caused a severe epidemic in Central America in 2012-13. The gradual development of that epidemic on nearly a continental scale suggests that dispersal at different scales played a significant role. Shade has been proposed as a way of reducing uredospore dispersal. The effect of shade (two strata: Erythrina poeppigiana below and Chloroleucon eurycyclum above) and full sun on H. vastatrix dispersal was studied with Burkard traps in relation to meteorological records. Annual and daily patterns of dispersal were observed, with peaks of uredospore capture obtained during wet seasons and in the early afternoon. A maximum of 464 uredospores in 1 day (in 14.4 m(3) of air) was recorded in October 2014. Interactions between shade/full sun and meteorological conditions were found. Rainfall, possibly intercepted by tree cover and redistributed by raindrops of higher kinetic energy, was the main driver of uredospore dispersal under shade. Wind gusts reversed this effect, probably by inhibiting water accumulation on leaves. Wind gusts also promoted dispersal under dry conditions in full sun, whereas they had no effect under shaded conditions, probably because the canopy blocked the wind. Our results indicate the importance of managing shade cover differentially in rainy versus dry periods to control the dispersal of airborne H. vastatrix uredospores.

  2. Merged Shape from Shading and Shape from Stereo for Planetary Topographic Mapping

    Science.gov (United States)

    Tyler, Laurence; Cook, Tony; Barnes, Dave; Parr, Gerhard; Kirk, Randolph

    2014-05-01

    Digital Elevation Models (DEMs) of the Moon and Mars have traditionally been produced from stereo imagery from orbit, or from the surface landers or rovers. One core component of image-based DEM generation is stereo matching to find correspondences between images taken from different viewpoints. Stereo matchers that rely mostly on textural features in the images can fail to find enough matched points in areas lacking in contrast or surface texture. This can lead to blank or topographically noisy areas in resulting DEMs. Fine depth detail may also be lacking due to limited precision and quantisation of the pixel matching process. Shape from shading (SFS), a two dimensional version of photoclinometry, utilizes the properties of light reflecting off surfaces to build up localised slope maps, which can subsequently be combined to extract topography. This works especially well on homogeneous surfaces and can recover fine detail. However the cartographic accuracy can be affected by changes in brightness due to differences in surface material, albedo and light scattering properties, and also by the presence of shadows. We describe here experimental research for the Planetary Robotics Vision Data Exploitation EU FP7 project (PRoViDE) into using stereo generated depth maps in conjunction with SFS to recover both coarse and fine detail of planetary surface DEMs. Our Large Deformation Optimisation Shape From Shading (LDOSFS) algorithm uses image data, illumination, viewing geometry and camera parameters to produce a DEM. A stereo-derived depth map can be used as an initial seed if available. The software uses separate Bidirectional Reflectance Distribution Function (BRDF) and SFS modules for iterative processing and to make the code more portable for future development. Three BRDF models are currently implemented: Lambertian, Blinn-Phong, and Oren-Nayar. A version of the Hapke reflectance function, which is more appropriate for planetary surfaces, is under development

  3. Impact of shading on daylight quality. Simulations with radiance

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, M.C.

    2001-07-01

    The impact of six exterior shading devices on daylight quality and on the potential for daylight utilisation in a standard, south-oriented office room was investigated through computer simulations with Radiance. The daylight quality was evaluated by considering four performance indicators: the absolute work plane illuminance, the illuminance uniformity on the work plane, the absolute luminance in the visual field and the luminance ratios between the work plane, VDT screen and surrounding surfaces. The results indicate that the overhang, white awning and horizontal venetian blind generated work plane illuminance levels that are more suitable for offices where traditional tasks are carried out. However, these devices did not prevent high luminance values at the window. On the other hand, the grey specular screen produced unacceptably low work plane illuminance, poor illuminance uniformity and unacceptably low luminance levels which resulted in unsuitable luminance ratios between the VDT screen, work plane and surroundings. The 45 deg venetian blind, white screen and blue awning provided work plane illuminance levels suitable for offices where a combination of paper and computer work is carried out. They also provided acceptable illuminance uniformity on the work plane, suitable luminance ratios between the work plane, VDT screen and surroundings and they significantly reduced the luminance of the window. However, the blue awning had a poorer performance in December than in June and the white screen resulted in high luminance values at the window, which indicates that the best device among the ones studied was the 45 deg venetian blind.

  4. Ecosystem Service of Shade Trees on Nutrient Cycling and Productivity of Coffee Agro-ecosystems

    Directory of Open Access Journals (Sweden)

    Rusdi Evizal

    2009-05-01

    Full Text Available Shade trees are significant in certification scheme of sustainable coffee production. They play an importance role on ecosystem functioning. This research is aimed to study ecosystem service of shade trees in some coffee agro-ecosystems particularly on nutrient cycling and land productivity. Four agro-ecosys tems of Robusta coffee (Coffea canephora, namely sun coffee (without shade trees, coffee shaded by Michelia champaca, coffee shaded by Gliricidia sepium, and coffee shaded by Erythrina indica are evaluated during 2007—2008. Smallholder coffee plantation in Sumberjaya Subdistrict, West Lampung, which managed under local standard were employed using Randomized Complete Block Design with 3 replications. The result showed that litter fall dynamic from shade trees and from coffee trees was influenced by rainfall. Shade trees decreased weed biomass while increased litter fall production. In dry season, shade trees decreased litter fall from coffee shaded by M. champaca. G. sepium and E. indica shaded coffee showed higher yield than sun coffee and M. champaca shaded coffee. Except for M. champaca shaded coffee, yield had positive correlation (r = 0.99 with litter fall production and had negative correlation (r = —0.82 with weed biomass production. Biomass production (litter fall + weed of sun coffee and shaded coffee was not significantly different. Litter fall of shade trees had significance on nutrient cycle mainly to balance the lost of nitrogen in coffee bean harvesting.Key Words: Coffea canephora, Michelia champaca, Gliricidia sepium, Erythrina indica, litter production, nutrient cycle, coffee yield.

  5. Las notas al pie en la traducción de Fifty Shades (Footnotes in the Translation of Fifty Shades

    Directory of Open Access Journals (Sweden)

    Xinia Valverde Jara

    2017-11-01

    Full Text Available Se analiza el recurso de las notas a pie de página insertas en la traducción independiente de literatura comercial en versión digital, de la trilogía Fifty Shades of Grey, Fifty Shades Darker y Fifty Shades Freed, de E. L. James. Se examina el grado de influencia de esos elementos extratextuales, y se concluye que todos ellos, organizados en un complejo proceso de traducción, en especial los del contexto de llegada, condicionan la estrategia traductológica. Abstract This study examines the use of footnotes as a translation strategy in the independent translation of commercial literature in digital format, based on the trilogy written by E. L. James, Fifty Shades of Grey, Fifty Shades Darker and Fifty Shades Freed. The analysis measures the influence of these extratextual elements within the complex translation process, specifically those of the target language context, and it is concluded that they condition the translation strategies used.

  6. Crown color match of implant-supported zirconia and Porcelain-Fused-to-Metal restorations:

    DEFF Research Database (Denmark)

    Peng, Min; Fei, Wei; Hosseini, Mandana

    2014-01-01

    ShadeTM, Micro Dental) in CIEL¿a¿b¿ coordinates. Subjective crown color match scores were evaluated. Independent sample t test of SPSS17.0 was used to compare the difference between zirconia restoration and PFM restoration. Spearman correlation was used to analyze the relationship between the spectrophotometric...

  7. PATTERN MATCHING IN MODELS

    Directory of Open Access Journals (Sweden)

    Cristian GEORGESCU

    2005-01-01

    Full Text Available The goal of this paper is to investigate how such a pattern matching could be performed on models,including the definition of the input language as well as the elaboration of efficient matchingalgorithms. Design patterns can be considered reusable micro-architectures that contribute to anoverall system architecture. Frameworks are also closely related to design patterns. Componentsoffer the possibility to radically change the behaviors and services offered by an application bysubstitution or addition of new components, even a long time after deployment. Software testing isanother aspect of reliable development. Testing activities mainly consist in ensuring that a systemimplementation conforms to its specifications.

  8. Shaded relief, color as height, Fiji

    Science.gov (United States)

    2000-01-01

    The Sovereign Democratic Republic of the Fiji Islands, commonly known as Fiji, is an independent nation consisting of some 332 islands surrounding the Koro Sea in the South Pacific Ocean. This topographic image shows Viti Levu, the largest island in the group. With an area of 10,429 square kilometers (about 4000 square miles), it comprises more than half the area of the Fiji Islands. Suva, the capital city, lies on the southeast shore. The Nakauvadra, the rugged mountain range running from north to south, has several peaks rising above 900 meters (about 3000 feet). Mount Tomanivi, in the upper center, is the highest peak at 1324 meters (4341 feet). The distinct circular feature on the north shore is the Tavua Caldera, the remnant of a large shield volcano that was active about 4 million years ago. Gold has been mined on the margin of the caldera since the 1930's. The Nadrau plateau is the low relief highland in the center of the mountain range. The coastal plains in the west, northwest and southeast account for only 15 percent of Viti Levu's area but are the main centers of agriculture and settlement.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM. Colors range from green at the lowest elevations top ink at the highest elevations. This image contains about 1300 meters(4300 feet) of total relief.The Shuttle Radar Topography Mission (SRTM), launched on February 11,2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect

  9. Post-cementation colorimetric evaluation of the interaction between the thickness of ceramic veneers and the shade of resin cement.

    Science.gov (United States)

    Calgaro, Patricia Angélica Milani; Furuse, Adilson Yoshio; Correr, Gisele Maria; Ornaghi, Bárbara Pick; Gonzaga, Carla Castiglia

    2014-08-01

    To evaluate the color parameters (CIELab*) after the cementation of ceramic disks of different thicknesses onto a resin substrate using four different shades of resin cements, and determine the color difference (ΔE) between the adhesively cemented disks and a 10 mm-thick A1 shade ceramic control (target color). Ceramic disks, simulating laminate veneers, with thicknesses of 0.5, 0.7 and 1.0 mm (shade A1, IPS Classic) were fabricated (n = 40) and cemented with a dual-cured resin cement (Variolink II, shades A1, bleach, opaque and transparent) onto 120 2 mm-thick resin composite substrates (shade A3.5, Adoro). Each ceramic disk was photocured for 80 seconds. The determination of the CIELab* parameters of each ceramic-cement-substrate set was performed with a spectrophotometer. A 10 mm-thick A1 ceramic disk was used as a control. The results for the color difference (ΔE) obtained from L*, a* and b* parameters were analyzed using ANOVA and Tukey's test (α = 0.05). The ΔE values ranged from 2.46 (1.0 mm, opaque cement) to 12.11 (0.5 mm, A1 cement). The opaque cement showed the lower ΔE values, followed by the bleach, transparent and A1 cements. With respect to the thickness of the ceramic, color differences between the target color and the group with 1.0 mm ceramic disks were smaller for all cement shades tested. Only the combination of 1.0 mm ceramic disks cemented with the opaque cement was able to mask the background color (ΔE resin cement were smaller in comparison with the bleach, transparent and A1 cements.

  10. Dynamics of the shade-avoidance response in Arabidopsis.

    Science.gov (United States)

    Ciolfi, Andrea; Sessa, Giovanna; Sassi, Massimiliano; Possenti, Marco; Salvucci, Samanta; Carabelli, Monica; Morelli, Giorgio; Ruberti, Ida

    2013-09-01

    Shade-intolerant plants perceive the reduction in the ratio of red light (R) to far-red light (FR) as a warning of competition with neighboring vegetation and display a suite of developmental responses known as shade avoidance. In recent years, major progress has been made in understanding the molecular mechanisms underlying shade avoidance. Despite this, little is known about the dynamics of this response and the cascade of molecular events leading to plant adaptation to a low-R/FR environment. By combining genome-wide expression profiling and computational analyses, we show highly significant overlap between shade avoidance and deetiolation transcript profiles in Arabidopsis (Arabidopsis thaliana). The direction of the response was dissimilar at the early stages of shade avoidance and congruent at the late ones. This latter regulation requires LONG HYPOCOTYL IN FAR RED1/SLENDER IN CANOPY SHADE1 and phytochrome A, which function largely independently to negatively control shade avoidance. Gene network analysis highlights a subnetwork containing ELONGATED HYPOCOTYL5 (HY5), a master regulator of deetiolation, in the wild type and not in phytochrome A mutant upon prolonged low R/FR. Network analysis also highlights a direct connection between HY5 and HY5 HOMOLOG (HYH), a gene functionally implicated in the inhibition of hypocotyl elongation and known to be a direct target of the HY5 transcription factor. Kinetics analysis show that the HYH gene is indeed late induced by low R/FR and that its up-regulation depends on the action of HY5, since it does not occur in hy5 mutant. Therefore, we propose that one way plants adapt to a low-R/FR environment is by enhancing HY5 function.

  11. Shading screens for the improvement of the night time climate of unheated greenhouses

    Directory of Open Access Journals (Sweden)

    J. I. Montero

    2013-01-01

    Full Text Available The objective of this work was to study the effect of shading screens, normally used during the day for cooling purposes, on the night-time climate of unheated greenhouses. For this purpose, first a number of experimental measurements were taken during cold nights to characterise the greenhouse climate both with and without an aluminised external screen. Secondly a Computational Fluid Dynamic (CFD model of greenhouse was developed. After validation of the model by comparison with experimental data, the model was used to simulate the greenhouse climate for different sky conditions ranging from cloudless to overcast nights. Simulations were performed for a greenhouse with internal and external shading screens and for the same greenhouse without screens. Experimental results showed the positive effect of an external shading screen, whose use increased night-time temperature and reduced the risk of thermal inversion. Its effect was much stronger under clear sky conditions. The CFD model supported this conclusion and provided a detailed explanation of the temperature behaviour of all the greenhouse types considered. CFD simulations proved that an aluminised screen placed inside the greenhouse at gutter height gave the greatest thermal increase. Therefore, external or internal screens can help to increase the sustainability of greenhouse production in areas with mild winter climates by enhancing the use of solar energy stored in the greenhouse soil during the previous day and released at night-time.

  12. Efficient modeling of sun/shade canopy radiation dynamics explicitly accounting for scattering

    Science.gov (United States)

    Bodin, P.; Franklin, O.

    2012-04-01

    The separation of global radiation (Rg) into its direct (Rb) and diffuse constituents (Rg) is important when modeling plant photosynthesis because a high Rd:Rg ratio has been shown to enhance Gross Primary Production (GPP). To include this effect in vegetation models, the plant canopy must be separated into sunlit and shaded leaves. However, because such models are often too intractable and computationally expensive for theoretical or large scale studies, simpler sun-shade approaches are often preferred. A widely used and computationally efficient sun-shade model was developed by Goudriaan (1977) (GOU). However, compared to more complex models, this model's realism is limited by its lack of explicit treatment of radiation scattering. Here we present a new model based on the GOU model, but which in contrast explicitly simulates radiation scattering by sunlit leaves and the absorption of this radiation by the canopy layers above and below (2-stream approach). Compared to the GOU model our model predicts significantly different profiles of scattered radiation that are in better agreement with measured profiles of downwelling diffuse radiation. With respect to these data our model's performance is equal to a more complex and much slower iterative radiation model while maintaining the simplicity and computational efficiency of the GOU model.

  13. Color matching in facial prosthetics: A systematic review.

    Science.gov (United States)

    Ranabhatt, Rani; Singh, Kamleshwar; Siddharth, Ramashanker; Tripathi, Shuchi; Arya, Deeksha

    2017-01-01

    Color matching to the surrounding skin is extremely important in patients wearing maxillofacial prostheses. It is of utmost importance to know the different techniques of color matching and coloring in maxillofacial prostheses. The purpose of this study is to review the literature data with regard to color matching in maxillofacial prosthetics. An electronic search of peer review restricted to English language dental literature was conducted to identify the relevant scientific article on color matching and coloring in maxillofacial prostheses. The publication year was up to December 2015 so that the search could include all the articles provided in that particular database. Two independent observers independently read the abstracts and later preselected full-text articles. A full-text review was carried out only for 15 articles. Out of the 15 articles, 7 were related to coloring using tinting, spraying, milling, and use of commercial cosmetics. Three studies were related to shade matching in maxillofacial prostheses. Two studies conducted the measurement of color in maxillofacial prostheses. Only one study had explained color and its relevance in maxillofacial prosthetics. Only one study was done for reproducing silicone shade guide matching Indian skin color. In addition, a single pilot study was done to measure facial skin and lip color in a human population sample stratified by race, gender, and age. Currently, there is no evidence discussing the best technique available for perfectly matching the color for the fabrication of maxillofacial prostheses. However, the latest instruments such as spectrophotometer and colorimeters are believed to have improved efficiency in matching the color.

  14. Performance of a daylight-redirecting glass-shading system

    DEFF Research Database (Denmark)

    Appelfeld, David; Svendsen, Svend

    2013-01-01

    with the prototype façade. This layout allowed the use of the same orientation and surroundings for both façades. The working plane illuminance was measured over several months and the measurements were accompanied with annual daylight simulations. The prototype system improved the daylighting conditions compared...... to the original system. The visual comfort was evaluated by glare analysis and the redirected daylight did not cause an additional discomfort glare. The higher utilization of daylight can save 20% of the lighting energy. The thermal insulation of the fenestration was maintained, with slightly increased solar...

  15. SHADE: A Shape-Memory-Activated Device Promoting Ankle Dorsiflexion

    Science.gov (United States)

    Pittaccio, S.; Viscuso, S.; Rossini, M.; Magoni, L.; Pirovano, S.; Villa, E.; Besseghini, S.; Molteni, F.

    2009-08-01

    Acute post-stroke rehabilitation protocols include passive mobilization as a means to prevent contractures. A device (SHADE) that provides repetitive passive motion to a flaccid ankle by using shape memory alloy actuators could be of great help in providing this treatment. A suitable actuator was designed as a cartridge of approximately 150 × 20 × 15 mm, containing 2.5 m of 0.25 mm diameter NiTi wire. This actuator was activated by Joule’s effect employing a 7 s current input at 0.7 A, which provided 10 N through 76 mm displacement. Cooling and reset by natural convection took 30 s. A prototype of SHADE was assembled with two thermoplastic shells hinged together at the ankle and strapped on the shin and foot. Two actuators were fixed on the upper shell while an inextensible thread connected each NiTi wire to the foot shell. The passive ankle motion (passive range of motion, PROM) generated by SHADE was evaluated optoelectronically on three flaccid patients (58 ± 5 years old); acceptability was assessed by a questionnaire presented to further three flaccid patients (44 ± 11.5 years old) who used SHADE for 5 days, 30 min a day. SHADE was well accepted by all patients, produced good PROM, and caused no pain. The results prove that suitable limb mobilization can be produced by SMA actuators.

  16. Simulation of photovoltaic module configuration for different shaded patterns

    Science.gov (United States)

    Jaideaw, Watcharin; Suksri, Amnart; Wongwuttanasatian, Tanakorn

    2018-02-01

    This paper presents the simulation of photovoltaic (PV) module operation which is created from basic equation of photovoltaic module. The three standard configurations of PV module consisting of series-parallel (SP), bridge-linked (BL), and total cross-tied (TCT) are studied. Nine photovoltaic cells are arranged in a three by three array and the effect of different shaded patterns on electrical generation is predicted. In order to find the optimal configuration of PV module which can generate the highest power during shading and develop the automatic connecting system of each PV cell, the conditions of shading 1 in 9 PV, 2 in 9 PV, 4 in 9 PV, and 6 in 9 PV are simulated. The effectiveness comparison between the case of with and without the automatic array connecting system is tested. When the three standard configurations of PV module are tested during shading, the result found that BL is better than SP by 0.1 – 14 % and TCT is better than SP by 2 – 20 %. It can be concluded that TCT is the best configuration of PV module under shaded conditions.

  17. Sample evaluation of ontology-matching systems

    NARCIS (Netherlands)

    Hage, W.R. van; Isaac, A.; Aleksovski, Z.

    2007-01-01

    Ontology matching exists to solve practical problems. Hence, methodologies to find and evaluate solutions for ontology matching should be centered on practical problems. In this paper we propose two statistically-founded evaluation techniques to assess ontology-matching performance that are based on

  18. Which is the ideal point of time to perform intraoperative 3D imaging in dorsal stabilisation of thoracolumbar spine fractures? A matched pair analysis.

    Science.gov (United States)

    Beck, M; Mittlmeier, T; Gierer, P; Rotter, R; Harms, C; Gradl, G

    2010-10-01

    After dorsal stabilisation of vertebral fractures by an internal fixateur the postoperative computed tomography is a standard procedure to control the positions of the pedicle screws, the success of the reposition, the clearance of the spinal canal and to plane an additive secondary ventral stabilisation. An intraoperative scan with a 3D image intensifier may clarify these questions directly after the implantation with the possibility of an immediate correction of the implants. The aim of this study was to find out the optimal point of time to perform an intraoperative 3D scan and if a postoperative computed tomography is dispensable. Intraoperative 3D scans were carried out on 33 patients with thoracolumbar spine fractures (T11-L5) after bi-segmental fixateur interne montage (Group 1). A matched pair group of 33 patients (Group 2) with a 3D scan after implantation of pedicle screws was built. A postoperative computed tomography of the instrumented spinal section was done in all patients. The following measurements were done in sagittal and axial reconstruction planes and were compared: classification of screw positions, maximal axial diameter of pedicles, cortical perforation of the screws. Additionally in Group 1 the distance between the upper and lower end plates of the injured section, the height of posterior vertebral body wall, the dislocation of the posterior wall and the minimal diameter of the spinal canal were measured. The intraoperative scoring of pedicle screws positions and the measurement of pedicle width showed in both groups a significant accordance with the computed tomography determinations. The measurements "posterior wall dislocation" and "diameter of spinal canal" were only possible in 24 3D scans and showed a significant difference compared with the CT data. The picture quality in Group 2 was scored significantly better than for Group 1 with the complete assembly of the fixateur. The ideal point of time for an intraoperative 3D imaging with

  19. Peer feedback on writing : The relation between students' ability match, feedback quality, and essay performance. Paper presented at the annual meeting of the American Educational Research Association (AERA)

    NARCIS (Netherlands)

    Huisman, B.A.; Saab, N.; Driel, van J.H.; Van, den Broek P.W.

    2017-01-01

    There does not appear to be consensus on how to optimally match students during the peer feedback phase: with same-ability or different-ability peers. The current study explored this issue in the context of an academic writing task. Adopting a quasi-experimental design, 94 undergraduate students

  20. Shaded Relief with Height as Color, North America

    Science.gov (United States)

    2003-01-01

    This image of North America was generated with data from the Shuttle Radar Topography Mission (SRTM). For this broad view the resolution of the data was first reduced to 30 arcseconds (about 928 meters north-south and 736 meters east-west in central North America), matching the best previously existing global digital topographic data set called GTOPO30. The data were then resampled to a Mercator projection with approximately square pixels (about one kilometer, or 0.6 miles, on each side). Even at this decreased resolution the variety of landforms comprising the North American continent is readily apparent.Active tectonics (structural deformation of the Earth's crust) along and near the Pacific -- North American plate boundary creates the great topographic relief seen along the Pacific coast. Earth's crustal plates converge in southern Mexico and in the northwest United States, melting the crust and producing volcanic cones. Along the California coast, the plates are sliding laterally past each other, producing a pattern of slices within the San Andreas fault system. And, where the plates are diverging, the crust appears torn apart as one huge tear along the Gulf of California (northwest Mexico), and as the several fractures comprising the Basin and Range province (in and around Nevada).Across the Great Plains, erosional patterns dominate, with streams channels surrounding and penetrating the remnants of older smooth slopes east of the Rocky Mountains. This same erosion process is exposing the bedrock structural patterns of the Black Hills in South Dakota and the Ozark Mountains in Arkansas. Lateral erosion and sediment deposition by the Mississippi River has produced the flatlands of the lower Mississippi Valley and the Mississippi Delta.To the north, evidence of the glaciers of the last ice age is widely found, particularly east of the Canadian Rocky Mountains and around the Great Lakes. From northeastern British Columbia, across Alberta, Saskatchewan, and

  1. Africa in SRTM 3-D, Anaglyph of Shaded Relief

    Science.gov (United States)

    2004-01-01

    This stereoscopic shaded relief image shows Africa's topography as measured by the Shuttle Radar Topography Mission (SRTM) in February 2000. Also shown are Madagascar, the Arabian Peninsula, and other adjacent regions. Previously, much of the topography here was not mapped in detail. Digital elevation data, such as provided by SRTM, are in high demand by scientists studying earthquakes, volcanism, and erosion patterns and for use in mapping and modeling hazards to human habitation. But the shape of Earth's surface affects nearly every natural process and human endeavor that occurs there, so elevation data are used in a wide range of applications. The image shown here is greatly reduced from the original data resolution, but still provides a good overview of the continent's landforms. It is best viewed while panning at full resolution while using image display software. The northern part of the continent consists of a system of basins and plateaus, with several volcanic uplands whose uplift has been matched by subsidence in the large surrounding basins. Many of these basins have been infilled with sand and gravel, creating the vast Saharan lands. The Atlas Mountains in the northwest were created by convergence of the African and Eurasian tectonic plates. The geography of the central latitudes of Africa is dominated by the Great Rift Valley, extending from Lake Nyasa to the Red Sea, and splitting into two arms to enclose an interior plateau and the nearly circular Lake Victoria, visible in the right center of the image. To the west lies the Congo Basin, a vast, shallow depression that rises to form an almost circular rim of highlands. Most of the southern part of the continent rests on a concave plateau comprising the Kalahari Basin and a mountainous fringe, skirted by a coastal plain that widens out in Mozambique in the southeast. Specific noteworthy features one may wish to explore in this scene include (1) the Richat Structure in Mauritania, a 'bull's eye

  2. Stinging Insect Matching Game

    Science.gov (United States)

    ... for Kids ▸ Stinging Insect Matching Game Share | Stinging Insect Matching Game Stinging insects can ruin summer fun for those who are ... the difference between the different kinds of stinging insects in order to keep your summer safe and ...

  3. Heat stress in cows at pasture and benefit of shade in a temperate climate region

    Science.gov (United States)

    Veissier, Isabelle; Van laer, Eva; Palme, Rupert; Moons, Christel P. H.; Ampe, Bart; Sonck, Bart; Andanson, Stéphane; Tuyttens, Frank A. M.

    2017-11-01

    Under temperate climates, cattle are often at pasture in summer and are not necessarily provided with shade. We aimed at evaluating in a temperate region (Belgium) to what extent cattle may suffer from heat stress (measured through body temperature, respiration rate and panting score, cortisol or its metabolites in milk, and feces on hot days) and at assessing the potential benefits of shade. During the summer of 2012, 20 cows were kept on pasture without access to shade. During the summer of 2011, ten cows had access to shade (young trees with shade cloth hung between them), whereas ten cows had no access. Climatic conditions were quantified by the Heat Load Index (HLI). In animals without access to shade respiration rates, panting scores, rectal temperatures, and milk cortisol concentrations increased as HLI increased in both 2011 and 2012. Fecal cortisol metabolites varied with HLI in 2011 only. When cattle had access to shade, their use of shade increased as the HLI increased. This effect was more pronounced during the last part of the summer, possibly due to better acquaintance with the shade construction. In this case, shade use increased to 65% at the highest HLI (79). Shade tempered the effects on respiration, rectal temperature, and fecal cortisol metabolites. Milk cortisol was not influenced by HLI for cows using shade for > 10% of the day. Therefore, even in temperate areas, cattle may suffer from heat when they are at pasture in summer and providing shade can reduce such stress.

  4. Iterative CT shading correction with no prior information

    Science.gov (United States)

    Wu, Pengwei; Sun, Xiaonan; Hu, Hongjie; Mao, Tingyu; Zhao, Wei; Sheng, Ke; Cheung, Alice A.; Niu, Tianye

    2015-11-01

    Shading artifacts in CT images are caused by scatter contamination, beam-hardening effect and other non-ideal imaging conditions. The purpose of this study is to propose a novel and general correction framework to eliminate low-frequency shading artifacts in CT images (e.g. cone-beam CT, low-kVp CT) without relying on prior information. The method is based on the general knowledge of the relatively uniform CT number distribution in one tissue component. The CT image is first segmented to construct a template image where each structure is filled with the same CT number of a specific tissue type. Then, by subtracting the ideal template from the CT image, the residual image from various error sources are generated. Since forward projection is an integration process, non-continuous shading artifacts in the image become continuous signals in a line integral. Thus, the residual image is forward projected and its line integral is low-pass filtered in order to estimate the error that causes shading artifacts. A compensation map is reconstructed from the filtered line integral error using a standard FDK algorithm and added back to the original image for shading correction. As the segmented image does not accurately depict a shaded CT image, the proposed scheme is iterated until the variation of the residual image is minimized. The proposed method is evaluated using cone-beam CT images of a Catphan©600 phantom and a pelvis patient, and low-kVp CT angiography images for carotid artery assessment. Compared with the CT image without correction, the proposed method reduces the overall CT number error from over 200 HU to be less than 30 HU and increases the spatial uniformity by a factor of 1.5. Low-contrast object is faithfully retained after the proposed correction. An effective iterative algorithm for shading correction in CT imaging is proposed that is only assisted by general anatomical information without relying on prior knowledge. The proposed method is thus practical

  5. Flower abscission in Vitis vinifera L. triggered by gibberellic acid and shade discloses differences in the underlying metabolic pathways

    Directory of Open Access Journals (Sweden)

    Sara eDomingos

    2015-06-01

    Full Text Available Understanding abscission is both a biological and an agronomic challenge. Flower abscission induced independently by shade and gibberellic acid (GAc sprays was monitored in grapevine (Vitis vinifera L. growing under a soilless greenhouse system during two seasonal growing conditions, in an early and late production cycle. Physiological and metabolic changes triggered by each of the two distinct stimuli were determined. Environmental conditions exerted a significant effect on fruit set as showed by the higher natural drop rate recorded in the late production cycle with respect to the early cycle. Shade and GAc treatments increased the percentage of flower drop compared to the control, and at a similar degree, during the late production cycle. The reduction of leaf gas exchanges under shade conditions was not observed in GAc treated vines. The metabolic profile assessed in samples collected during the late cycle differently affected primary and secondary metabolisms and showed that most of the treatment-resulting variations occurred in opposite trends in inflorescences unbalanced in either hormonal or energy deficit abscission-inducing signals. Particularly concerning carbohydrates metabolism, sucrose, glucose, tricarboxylic acid (TCA metabolites and intermediates of the raffinose family oligosaccharides pathway were lower in shaded and higher in GAc samples. Altered oxidative stress remediation mechanisms and indolacetic acid (IAA concentration were identified as abscission signatures common to both stimuli. According to the global analysis performed, we report that grape flower abscission mechanisms triggered by GAc application and C-starvation are not based on the same metabolic pathways.

  6. Effect of Dental Restorative Material Type and Shade on Characteristics of Two-Layer Dental Composite Systems

    Directory of Open Access Journals (Sweden)

    Atefeh Karimzadeh

    Full Text Available Abstract The purpose of this study was to investigate the effects of shade and material type and shape in dental polymer composites on the hardness and shrinkage stress of bulk and two-layered restoration systems. For this purpose, some bulk and layered specimens from three different shades of dental materials were prepared and light-cured. The experiments were carried out on three types of materials: conventional restorative composite, nanohybrid composite and nanocomposite. Micro-indentation experiment was performed on the bulk and also on each layer of layered restoration specimens using a Vicker's indenter. The interface between the two layers was studied by scanning electron microscopy (SEM. The results revealed significant differences between the values of hardness for different shades in the conventional composite and also in the nanohybrid composite. However, no statistically significant difference was observed between the hardness values for different shades in the nanocomposite samples. The layered restoration specimens of different restorative materials exhibited lower hardness values with respect to their bulk specimens. The reduction in the hardness value of the layered conventional composite samples was higher than those of the nanocomposite and nanohybrid composite specimens indicating more shrinkage stresses generated in the conventional composite restorations. According to the SEM images, a gap was observed between the two layers in the layered restorations.

  7. Information in small neuronal ensemble activity in the hippocampal CA1 during delayed non-matching to sample performance in rats

    Directory of Open Access Journals (Sweden)

    Takahashi Susumu

    2009-09-01

    Full Text Available Abstract Background The matrix-like organization of the hippocampus, with its several inputs and outputs, has given rise to several theories related to hippocampal information processing. Single-cell electrophysiological studies and studies of lesions or genetically altered animals using recognition memory tasks such as delayed non-matching-to-sample (DNMS tasks support the theories. However, a complete understanding of hippocampal function necessitates knowledge of the encoding of information by multiple neurons in a single trial. The role of neuronal ensembles in the hippocampal CA1 for a DNMS task was assessed quantitatively in this study using multi-neuronal recordings and an artificial neural network classifier as a decoder. Results The activity of small neuronal ensembles (6-18 cells over brief time intervals (2-50 ms contains accurate information specifically related to the matching/non-matching of continuously presented stimuli (stimulus comparison. The accuracy of the combination of neurons pooled over all the ensembles was markedly lower than those of the ensembles over all examined time intervals. Conclusion The results show that the spatiotemporal patterns of spiking activity among cells in the small neuronal ensemble contain much information that is specifically useful for the stimulus comparison. Small neuronal networks in the hippocampal CA1 might therefore act as a comparator during recognition memory tasks.

  8. Matching Systems for Refugees

    Directory of Open Access Journals (Sweden)

    Will Jones

    2017-08-01

    Full Text Available Design of matching systems between refugees and states or local areas is emerging as one of the most promising solutions to problems in refugee resettlement. We describe the basics of two-sided matching theory used in a number of allocation problems, such as school choice, where both sides need to agree to the match. We then explain how these insights can be applied to international refugee matching in the context of the European Union and examine how refugee matching might work within the United Kingdom, Canada, and the United States.

  9. Masking ability of a zirconia ceramic on composite resin substrate shades

    Directory of Open Access Journals (Sweden)

    Farhad Tabatabaian

    2017-01-01

    Conclusion: Within the limitations of this study, it can be concluded that the tested zirconia ceramic could not thoroughly mask different shades of the composite resin substrates. Moreover, color masking of zirconia depends on the shade of substrate.

  10. Matching Students to Schools

    Directory of Open Access Journals (Sweden)

    Dejan Trifunovic

    2017-08-01

    Full Text Available In this paper, we present the problem of matching students to schools by using different matching mechanisms. This market is specific since public schools are free and the price mechanism cannot be used to determine the optimal allocation of children in schools. Therefore, it is necessary to use different matching algorithms that mimic the market mechanism and enable us to determine the core of the cooperative game. In this paper, we will determine that it is possible to apply cooperative game theory in matching problems. This review paper is based on illustrative examples aiming to compare matching algorithms in terms of the incentive compatibility, stability and efficiency of the matching. In this paper we will present some specific problems that may occur in matching, such as improving the quality of schools, favoring minority students, the limited length of the list of preferences and generating strict priorities from weak priorities.

  11. Best matching theory & applications

    CERN Document Server

    Moghaddam, Mohsen

    2017-01-01

    Mismatch or best match? This book demonstrates that best matching of individual entities to each other is essential to ensure smooth conduct and successful competitiveness in any distributed system, natural and artificial. Interactions must be optimized through best matching in planning and scheduling, enterprise network design, transportation and construction planning, recruitment, problem solving, selective assembly, team formation, sensor network design, and more. Fundamentals of best matching in distributed and collaborative systems are explained by providing: § Methodical analysis of various multidimensional best matching processes § Comprehensive taxonomy, comparing different best matching problems and processes § Systematic identification of systems’ hierarchy, nature of interactions, and distribution of decision-making and control functions § Practical formulation of solutions based on a library of best matching algorithms and protocols, ready for direct applications and apps development. Design...

  12. Physiological reactions in goat breeds maintained under shade, sun and partially shaded areas

    Directory of Open Access Journals (Sweden)

    Luís Fernando Dias Medeiros

    2015-12-01

    Full Text Available ABSTRACT. Medeiros L.F.D., Rodrigues V.C., Vieira D.H., Souza S.L.G. de, Neto O.C., Figueiredo N. de, Pinto C.F.D., Miranda A.L. & Violento C.B. [Physiological reactions in goat breeds maintained under shade, sun and partially shaded areas.] Reações fisiológicas de cabras em diferentes ambientes e coeficiente de tolerância ao calor em cabritos. Revista Brasileira de Medicina Veterinária, 37(4:286-296, 2015. Departamento de Reprodução e Avaliação Animal, Instituto de Zootecnia, Universidade Federal Rural do Rio de Janeiro, BR 465 Km 7, Seropédica, RJ 23851-970, Brasil. E-mail: diasmedeiros@yahoo.com.br The experiment was carried out to measure the effects of thermal stress on the rectal temperature (RT and respiratory frequency (RF, in animals of Boer and Saanen breeds, under the conditions of hot and humid climate of city of Rio de Janeiro, Baixada Fluminense, South East Region of Brazil; also the heat tolerance coefficient (HTC of Amakiri e Funcho was applied on pure and crossbreeds kids. The goats were divided into three groups, each group consisting of four females from each breed group. Each group was subjected to different surroundings, constituted by three experimental treatment: treatment A, with a sun protected enclosed area; treatment B, a sun exposed area without covering; and treatment C, area with a 50% covered section and a 50% sun exposed area, which permitted free circulation of the goats. A Balanced Latin Square was used. The RT and RF of the goats, in the afternoon periods (l5h00, were higher, than in the morning periods (09h00. The animals kept in the sun presented much higher results, especially in the afternoon periods, than the animals in the other two confinement areas. There were no differences in the RT and RF of the groups maintained in the shade or in partially covered area. There were differences in the RT and RF measurements between the two breeds, in the morning periods and in the afternoon periods

  13. Plasticity in seedling morphology, biomass allocation and physiology among ten temperate tree species in response to shade is related to shade tolerance and not leaf habit.

    Science.gov (United States)

    Chmura, D J; Modrzyński, J; Chmielarz, P; Tjoelker, M G

    2017-03-01

    Mechanisms of shade tolerance in tree seedlings, and thus growth in shade, may differ by leaf habit and vary with ontogeny following seed germination. To examine early responses of seedlings to shade in relation to morphological, physiological and biomass allocation traits, we compared seedlings of 10 temperate species, varying in their leaf habit (broadleaved versus needle-leaved) and observed tolerance to shade, when growing in two contrasting light treatments - open (about 20% of full sunlight) and shade (about 5% of full sunlight). We analyzed biomass allocation and its response to shade using allometric relationships. We also measured leaf gas exchange rates and leaf N in the two light treatments. Compared to the open treatment, shading significantly increased traits typically associated with high relative growth rate (RGR) - leaf area ratio (LAR), specific leaf area (SLA), and allocation of biomass into leaves, and reduced seedling mass and allocation to roots, and net assimilation rate (NAR). Interestingly, RGR was not affected by light treatment, likely because of morphological and physiological adjustments in shaded plants that offset reductions of in situ net assimilation of carbon in shade. Leaf area-based rates of light-saturated leaf gas exchange differed among species groups, but not between light treatments, as leaf N concentration increased in concert with increased SLA in shade. We found little evidence to support the hypothesis of a increased plasticity of broadleaved species compared to needle-leaved conifers in response to shade. However, an expectation of higher plasticity in shade-intolerant species than in shade-tolerant ones, and in leaf and plant morphology than in biomass allocation was supported across species of contrasting leaf habit. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.

  14. Shades of African values and interests in Nigeria's international ...

    African Journals Online (AJOL)

    Shades of African values and interests in Nigeria's international relations: investigating the gains and the costs, 1960 – 2014. ... of policies that ensure that the country recovers all she lost in her years of naivety in I.R. The study adopted the historical methodology which emphasizes critical analyses and interpretation of facts.

  15. Spectral quality of the shading and spacing on alpinia cultivation

    Directory of Open Access Journals (Sweden)

    Roseane Rodrigues de Souza

    2016-09-01

    Full Text Available Intensity and spectral quality of the radiation can be manipulated with the use of neutral or color shading screens in growing plants, and it can promote physiological and morphological changes. Therefore, the purpose was evaluating the effects of different shading levels, screens spectral quality, and spacing in the development of cv. Jungle King and cv. Jungle Queen gingers. Rhizomes were planted in 5 cultivation environments (full sun, black screen 50%, black screen 30%, blue screen 50% and red screen 50% shading and 2 spacing (0.8 x 1.0 m and 0.8 x 1.5 m. The experimental design was completely randomized in a factorial 5x2x2x7, with 5 environments of cultivation, 2 cultivars, 2 spacing between plants and 7 times of evaluation (55, 120, 200, 255, 285, 335 e 370 days after planting (DAP. The evaluations were shooting index, number of shoots per plant, shoot height and number of leaves per shoot. Shooting of cv. Jungle Queen was earlier compared to cv. Jungle King. Spacing did not influence in the initial development of plants. Screens with 50% shading, in blue or red colors, enhanced alpinia development.

  16. Effect of Color Shading Procedures and Cyclic Loading on the ...

    African Journals Online (AJOL)

    2018-02-07

    Feb 7, 2018 ... How to cite this article: Tuncel I, Turp I, Usumez A. Effect of color shading procedures and cyclic loading on the biaxial flexural strength of zirconia. Niger J Clin Pract 2018;21:7-12. This is an open access article distributed under the terms of the Creative Commons. Attribution-NonCommercial-ShareAlike 3.0 ...

  17. The different shades of mammalian pluripotent stem cells

    NARCIS (Netherlands)

    Kuijk, E.W.; Lopes, S.M.; Geijsen, N.; Macklon, N.S.; Roelen, B.A.J.

    2011-01-01

    The different shades of mammalian pluripotent stem cells Abstract BACKGROUND Pluripotent stem cells have been derived from a variety of sources such as from the inner cell mass of preimplantation embryos, from primordial germ cells, from teratocarcinomas and from male germ cells. The recent

  18. Bird communities in sun and shade coffee farms in Kenya

    Directory of Open Access Journals (Sweden)

    C. Smith

    2015-07-01

    Full Text Available Agricultural expansion to meet rising crop demand is one of the greatest threats to terrestrial biodiversity. Coffee, one of the most valuable trade items in tropical countries, can provide both economic livelihood and wildlife habitat. Previous work, conducted primarily on Neotropical coffee farms, indicates that birds are generally more abundant and diverse in farms with a canopy of shade trees, though regional variation exists. To date, few studies have examined birds on coffee farms in Africa, which contains 20% of the world’s coffee acreage. We studied differences in the bird communities between sun and shade monoculture coffee in central Kenya, and we examined effects of vegetation on bird abundance and diversity. Sun coffee had higher species richness and abundances of all major guilds (omnivores, insectivores, and granivores, and showed low community similarity to shade. Unlike findings from the Neotropics, canopy cover appeared to have a negative influence on all guilds, while understory volume of weeds increased bird abundance and species richness with a similar magnitude as canopy cover. These differences highlight the need for further studies in the general East Africa region with a wider variety of shade coffee systems.

  19. Evaluating Accuracy of the Sunnova Pro Platform Shade Measurement

    Energy Technology Data Exchange (ETDEWEB)

    2018-01-11

    Sunnova's new solar energy design platform, Sunnova Pro, automatically generates a 3D model of a building and surrounding shading objects. The product is designed to automate the process of engineering a system, sizing batteries and preparing sales proposals.

  20. Adaptive heating, ventilation and solar shading for dwellings

    NARCIS (Netherlands)

    Alders, E.E.

    2017-01-01

    Calculation of various strategies for the heating of, and the prevention of overheating in, a Dutch standard dwelling that includes (automated) adaptive ventilation systems and solar shading to maintain indoor temperatures at acceptably comfortable temperatures informs this analysis of the costs,

  1. Effect of shade on various parameters of Friesian cows in a ...

    African Journals Online (AJOL)

    Shade cows tended to spend more time (P < 0.10) lying down (mainly in the shade) to ruminate or to sleep than cows without access to shade. Different behavioural patterns indicated responses by cows specifically aimed at alleviating heat stress during the day. Die invloed van 'n skaduwee-afdak op die gedragspatroon ...

  2. The effects of shade and shearing date on the production of Merino ...

    African Journals Online (AJOL)

    Lambs born in shaded paddocks tended to be heavier at birth than those born in control paddocks. Survival of lambs was unaffected by the provision of shade, but lambs born in shaded paddocks were 3.8 % heavier at weaning than contemporaries born in control paddocks. Lambs born to ewes that were shorn prior to ...

  3. Leaf traits show different relationships with shade tolerance in moist versus dry tropical forests

    NARCIS (Netherlands)

    Poorter, L.

    2009-01-01

    ¿ Shade tolerance is the central paradigm for understanding forest succession and dynamics, but there is considerable debate as to what the salient features of shade tolerance are, whether adult leaves show similar shade adaptations to seedling leaves, and whether the same leaf adaptations are found

  4. Impact of shade and cocoa plant densities on soil organic carbon ...

    African Journals Online (AJOL)

    The experiment was sited at the Bunso substation of the Cocoa Research Institute of Ghana on Rhodi-lixic ferralsol with annual precipitation of about 1500 mm. The shade was provided by forest trees of 18 trees ha-1 and no shade, while the cocoa densities were 1111, 1428 and 1667 trees ha-1. Shade effects on organic ...

  5. Phenotypic Plasticity in Reproductive Traits of the Perennial Shrub Ulex europaeus in Response to Shading: A Multi-Year Monitoring of Cultivated Clones.

    Directory of Open Access Journals (Sweden)

    Anne Atlan

    Full Text Available Phenotypic plasticity may be advantageous for plants to be able to rapidly cope with new and changing environments associated with climate change or during biological invasions. This is especially true for perennial plants, as they may need a longer period to respond genetically to selective pressures than annuals, and also because they are more likely to experience environmental changes during their lifespan. However, few studies have explored the plasticity of the reproductive life history traits of woody perennial species. This study focuses on a woody shrub, Ulex europaeus (common gorse, and on the response of its reproductive traits to one important environmental factor, shading. The study was performed on clones originating from western France (within the native range of this invasive species and grown for seven years. We compared traits of plants grown in a shade treatment (with two successive shade levels vs. full natural light. The traits monitored included flowering onset, pod production and seed predation. All traits studied responded to shading, exhibiting various levels of plasticity. In particular, dense shade induced a radical but reversible decrease in flower and pod production, while moderate shade had little effect on reproductive traits. The magnitude of the response to dense shade depended on the genotype, showing a genetically based polymorphism of plasticity. The level of plasticity also showed substantial variations between years, and the effect of environmental variations was cumulative over time. This suggests that plasticity can influence the lifetime fitness of U. Europaeus and is involved in the capacity of the species to grow under contrasting environmental conditions.

  6. Comparison among Detailed and Simplified Calculation Methods for Thermal and Energy Assessment of the Building Envelope and the Shadings of a New Wooden nZEB House

    Directory of Open Access Journals (Sweden)

    Cristina Carletti

    2018-02-01

    Full Text Available This paper deals with research carried out by the University of Florence on the thermal and energy performances of a recently built nZEB in Mediterranean Italian area. Heterogeneous component and thermal bridges performances have been analysed and critically evaluated with different calculation methods, and the results in terms of energy consumptions for heating and cooling have been compared. Some solar shading devices have been evaluated to reduce the building energy need for cooling. Main results of the research are presented for the components and thermal bridges properties and for the energy balance of the building implemented with different solar shadings.

  7. Effects of stimuli organization on identity matching-to-sample performances of persons with autism / Desempenho de pessoas com autismo em tarefas de emparelhamento com o modelo por identidade: efeitos da organização dos estímulos

    Directory of Open Access Journals (Sweden)

    Camila Graciella Santos Gomes

    2008-01-01

    Full Text Available This study assessed the performance of 20 persons with autism in an identity matching-to-sample task, using two procedures with different stimuli arrangements and different response requirements. The typical matching procedure presented one sample stimulus and three comparison stimuli; the adapted matching displayed three sample stimuli and three comparison stimuli simultaneously. Three consecutive sets of trials were conducted: a 10-trial set of adapted matching, a 10-trial set of typical matching, and a 20-trial set intermixing both trial types in an unsystematic order. The average score of correct performance was significantly higher under the adapted matching than under the typical matching, but the inter-individual variability was large and the adapted arrangement favored mainly the performance of participants with lower scores. The participants' previous history in learning may have played a role in the way they solved the present task, but further investigation, with experimental controls additional will be necessary to evaluate this possibility.

  8. A comprehensive study on partial shading response of c-Si modules and yield modeling of string inverter and module level power electronics

    NARCIS (Netherlands)

    Sinapis, K.; Tzikas, C.; Litjens, G.; van den Donker, M.; Folkerts, W.; van Sark, W.G.J.H.M.; Smets, A.

    2016-01-01

    Building Integrated and Building Attached Photovoltaic (BIPV, BAPV) systems may suffer from lower performance than predicted as a result of not considered partial shading. New system architectures have been proposed to optimize performance. The common approach of these new architectures is to track

  9. The Kent Face Matching Test.

    Science.gov (United States)

    Fysh, Matthew C; Bindemann, Markus

    2018-05-01

    This study presents the Kent Face Matching Test (KFMT), which comprises 200 same-identity and 20 different-identity pairs of unfamiliar faces. Each face pair consists of a photograph from a student ID card and a high-quality portrait that was taken at least three months later. The test is designed to complement existing resources for face-matching research, by providing a more ecologically valid stimulus set that captures the natural variability that can arise in a person's appearance over time. Two experiments are presented to demonstrate that the KFMT provides a challenging measure of face matching but correlates with established tests. Experiment 1 compares a short version of this test with the optimized Glasgow Face Matching Test (GFMT). In Experiment 2, a longer version of the KFMT, with infrequent identity mismatches, is correlated with performance on the Cambridge Face Memory Test (CFMT) and the Cambridge Face Perception Test (CFPT). The KFMT is freely available for use in face-matching research. © 2017 The British Psychological Society.

  10. Typology of building shading elements on Jalan Sudirman corridor in Pekanbaru

    Science.gov (United States)

    Faisal, G.; Aldy, P.

    2016-04-01

    In 2013, temperature in Pekanbaru was between 22.60°C and 34.6°C with humidity 79.14 percent. This condition has increase the concern of energy utilization to building comfort. Buildings have the biggest energy consuming due to the use of air conditioner in Pekanbaru. One effort to reduced energy is shading devices application. Application of air conditioner need huge energy, replaced natural circulation with architecture elements to reduced building thermal. This research study about system and building shading devices types that influence building thermal in Pekanbaru so that knowing characteristics and elements form. This study aims to determine and identify of systems and building elements types in Pekanbaru, which the element forms to conquer in climate condition. Qualitative method with rationalistic-paradigm has used to identify typology of building shading devices on Jalan Sudirman corridor. The research orientation on typology theory, thermal theory, and building shading device to identification of building shading device types on Jalan Sudirman corridor. Based on the survey result, there are 2 type of building shading devices on Jalan Sudirman Pekanbaru which is based on forms and quantity of shading. The types are building shading devices based on shading quantity and building shading devices based on shading forms.

  11. Africa in SRTM 3-D, Anaglyph of Shaded Relief

    Science.gov (United States)

    2004-01-01

    This stereoscopic shaded relief image shows Africa's topography as measured by the Shuttle Radar Topography Mission (SRTM) in February 2000. Also shown are Madagascar, the Arabian Peninsula, and other adjacent regions. Previously, much of the topography here was not mapped in detail. Digital elevation data, such as provided by SRTM, are in high demand by scientists studying earthquakes, volcanism, and erosion patterns and for use in mapping and modeling hazards to human habitation. But the shape of Earth's surface affects nearly every natural process and human endeavor that occurs there, so elevation data are used in a wide range of applications. The image shown here is greatly reduced from the original data resolution, but still provides a good overview of the continent's landforms. It is best viewed while panning at full resolution while using image display software. The northern part of the continent consists of a system of basins and plateaus, with several volcanic uplands whose uplift has been matched by subsidence in the large surrounding basins. Many of these basins have been infilled with sand and gravel, creating the vast Saharan lands. The Atlas Mountains in the northwest were created by convergence of the African and Eurasian tectonic plates. The geography of the central latitudes of Africa is dominated by the Great Rift Valley, extending from Lake Nyasa to the Red Sea, and splitting into two arms to enclose an interior plateau and the nearly circular Lake Victoria, visible in the right center of the image. To the west lies the Congo Basin, a vast, shallow depression that rises to form an almost circular rim of highlands. Most of the southern part of the continent rests on a concave plateau comprising the Kalahari Basin and a mountainous fringe, skirted by a coastal plain that widens out in Mozambique in the southeast. Specific noteworthy features one may wish to explore in this scene include (1) the Richat Structure in Mauritania, a 'bull's eye

  12. Ontology Matching Across Domains

    Science.gov (United States)

    2010-05-01

    matching include GMO [1], Anchor-Prompt [2], and Similarity Flooding [3]. GMO is an iterative structural matcher, which uses RDF bipartite graphs to...AFRL under contract# FA8750-09-C-0058. References [1] Hu, W., Jian, N., Qu, Y., Wang, Y., “ GMO : a graph matching for ontologies”, in: Proceedings of

  13. The effect of light-cured nanofilled composite resin shades on their under-surface temperature

    Science.gov (United States)

    Hanum, U. A.; Herda, E.; Indrani, D. J.

    2017-08-01

    The objective of this study was to observe the effect of shades of light-cured nanofilled composite resins on their under-surface temperature. Resin composites specimens of shades bright, medium, and dark shade were obtained from a cylindrical mold. While polymerizing using a curing unit, the under-surface temperature was determined at the bottom of the specimens using a thermocouple wire 20 sec after the start. Results showed that the under-surface temperature of the darker shade specimens were relatively higher that those of the brighter shades with significant diffferences between the resin composites of different shades. To conlude, the under-surface temperature of the light-cured nanofilled resin composites raised from the brighter to the darker shades.

  14. Comparative analysis of perturb & observe and fuzzy logic maximum power point tracking techniques for a photovoltaic array under partial shading conditions

    Directory of Open Access Journals (Sweden)

    T. MURALI MOHAN

    2015-12-01

    Full Text Available The interfacing of maximum power point tracking (MPPT controller is more concern as it contributes significantly to the power output of photovoltaic systems. The perturb and observe (P&O and fuzzy logic based P&O are two most promising MPPT techniques in wide range of irradiance conditions which include fully shaded condition to no shading, uniform and non uniform shadings among the strings. This paper analyzes the implementation of those two MPPT techniques to a photovoltaic (PV array in MATLAB/SIMULINK environment. Basically the power verses voltage curve of a PV array is highly non linear which contains single peak in the curve under uniform irradiance but the non uniform irradiance leaves multiple peaks in the curve. The MPPT normally controls the boost converter duty cycle to track the global peak power point of the PV array. When multiple peaks are present, the P&O has the probability of capturing a local maximum point rather than a global maximum. It is observed that under normal shadings both MPPTs are performed well but under partial shadings Fuzzy logic based P&O MPPT outperform over P&O MPPT.

  15. Photosynthesis, photoprotection, and growth of shade-tolerant tropical tree seedlings under full sunlight.

    Science.gov (United States)

    Krause, G Heinrich; Winter, Klaus; Matsubara, Shizue; Krause, Barbara; Jahns, Peter; Virgo, Aurelio; Aranda, Jorge; García, Milton

    2012-09-01

    High solar radiation in the tropics is known to cause transient reduction in photosystem II (PSII) efficiency and CO(2) assimilation in sun-exposed leaves, but little is known how these responses affect the actual growth performance of tropical plants. The present study addresses this question. Seedlings of five woody neotropical forest species were cultivated under full sunlight and shaded conditions. In full sunlight, strong photoinhibition of PSII at midday was documented for the late-successional tree species Ormosia macrocalyx and Tetragastris panamensis and the understory/forest gap species, Piper reticulatum. In leaves of O. macrocalyx, PSII inhibition was accompanied by substantial midday depression of net CO(2) assimilation. Leaves of all species had increased pools of violaxanthin-cycle pigments. Other features of photoacclimation, such as increased Chl a/b ratio and contents of lutein, β-carotene and tocopherol varied. High light caused strong increase of tocopherol in leaves of T. panamensis and another late-successional species, Virola surinamensis. O. macrocalyx had low contents of tocopherol and UV-absorbing substances. Under full sunlight, biomass accumulation was not reduced in seedlings of T. panamensis, P. reticulatum, and V. surinamensis, but O. macrocalyx exhibited substantial growth inhibition. In the highly shade-tolerant understory species Psychotria marginata, full sunlight caused strongly reduced growth of most individuals. However, some plants showed relatively high growth rates under full sun approaching those of seedlings at 40 % ambient irradiance. It is concluded that shade-tolerant tropical tree seedlings can achieve efficient photoacclimation and high growth rates in full sunlight.

  16. Rapid matching in Drosophila place learning

    Science.gov (United States)

    Zars, Melissa; Zars, Troy

    2009-08-01

    The level of conditioned behavior in animals is proportional to the intensity, amount, frequency, or probability of reinforcement. Interestingly, this matching can be dynamic, with performance levels following, for example, a switch in the probability of reinforcement with a short delay. We previously found that conditioned performance levels in Drosophila match reinforcement intensity in a place conditioning paradigm. Whether Drosophila can match conditioned behavior to a change in reinforcement intensity was an open question. In this study, we found that both conditioned behavior and memory levels match reinforcement intensity after a switch, and this rapid matching occurs within 2 min. Thus, fruit flies can dynamically match conditioned behavior and memory levels to a change in reinforcement intensity.

  17. Solar Heat Gain Reduction of Ventilated Double Skin Windows without a Shading Device

    Directory of Open Access Journals (Sweden)

    Bokyoung Koo

    2017-12-01

    Full Text Available With global efforts to strengthen various energy-saving policies for buildings to reduce greenhouse gas emissions, in South Korea, new laws and regulations have been in force since May 2015 to install shading devices in public buildings and to include the solar heat gain coefficient (SHGC reduction performance of shading devices in the evaluation of building performance. By making a ventilated air layer outer glass and inner glass to lower the temperatures of the air layer and glass surface, it is possible to reduce the amount of heat flowing into the building while maintaining the same level of light transmission as plain window systems. This study proposes a double-skin façade window with a 20 mm ventilated air cavity, and assumes that insolation inflow indoors would be reduced through ventilation in the air cavity. The artificial solar lab test results show that the SHGC can be lowered through ventilation by 28% to 52.9%. Additionally, in an outdoor test cell experiment, the results show that the mean temperature was 0.6 K and the peak temperature was 0.9 K lower with ventilation in the air cavity than that without ventilation in the air cavity.

  18. A PRELIMINARY STUDY ON VEGETATIVE SHADING TO MINIMISE GLARE

    Directory of Open Access Journals (Sweden)

    Christina E. Mediastika

    2004-01-01

    Full Text Available In low cost housing of warm humid regions where natural ventilation is usually employed, the presence of large openings will also cause unnecessary glare and heat gain of solar radiation This paper reports a preliminary study to handle glare issue without impairing natural ventilation. The use of climbing vegetation planted on a frame with fully adjusted foliage dense as shading devices is investigated. The frame is placed at the most possible position of the low cost housing and two variables, i.e. foliage porosity and leaf surface reflectance is studied using two computational simulation methods. Radiance is employed to calculate glare index after the vegetative shading and Brevent is used to assess ventilation flow rates occurred indoors toward indoors thermal comfort of the modelled housing. The study indicates that using climbing vegetation is possible for both reducing glare and supplying the required ventilation flow rates at the same time.

  19. Latent fingerprint matching.

    Science.gov (United States)

    Jain, Anil K; Feng, Jianjiang

    2011-01-01

    Latent fingerprint identification is of critical importance to law enforcement agencies in identifying suspects: Latent fingerprints are inadvertent impressions left by fingers on surfaces of objects. While tremendous progress has been made in plain and rolled fingerprint matching, latent fingerprint matching continues to be a difficult problem. Poor quality of ridge impressions, small finger area, and large nonlinear distortion are the main difficulties in latent fingerprint matching compared to plain or rolled fingerprint matching. We propose a system for matching latent fingerprints found at crime scenes to rolled fingerprints enrolled in law enforcement databases. In addition to minutiae, we also use extended features, including singularity, ridge quality map, ridge flow map, ridge wavelength map, and skeleton. We tested our system by matching 258 latents in the NIST SD27 database against a background database of 29,257 rolled fingerprints obtained by combining the NIST SD4, SD14, and SD27 databases. The minutiae-based baseline rank-1 identification rate of 34.9 percent was improved to 74 percent when extended features were used. In order to evaluate the relative importance of each extended feature, these features were incrementally used in the order of their cost in marking by latent experts. The experimental results indicate that singularity, ridge quality map, and ridge flow map are the most effective features in improving the matching accuracy.

  20. EFFECTS ON THE PERFORMANCE DURING A MATCHING-TO-SAMPLE TASK DUE TO THE TYPE AND ORDER OF EXPOSITION TO THE TRANSFERENCE TESTS

    Directory of Open Access Journals (Sweden)

    CAMILO HURTADO-PARRADO

    2007-08-01

    Full Text Available This study evaluated the effects of manipulating the type and order of presentation of transference tests. Twenty eightundergraduate students divided in 4 groups were exposed to a second order matching to sample procedure. Theconditions of exposition were: ascending difficulty/complexity order of the tests, descending order and two randomlyassigned orders. Results are discussed in terms of percentages of effectiveness; additionally, the latency is proposed asan alternative measure sensitive to the level of difficulty of this kind of tasks. Findings showed heterogeneity in thevelocity of acquisition of the conditional discriminations during the training phase, even though the conditions of thetask were equal for all the subjects. The exposition to the ascending and descending order seemed to affect negativelythe effective behavioral adjustment, whereas one of the randomly assigned sequences seemed to be the best condition.The order of exposition to transference tests, in interaction with a history of early acquisition in the training phase,served to understand the findings of this study and to discuss the necessity of a systematical evaluation of the factors implied in the transference tests. It is suggested to assess the validity of different kind of transference tests and theconvenience of some of them to be use in the investigation of the phenomena related to the effective and variablebehavior.

  1. Salinity stress constrains photosynthesis in Fraxinus ornus more when growing in partial shading than in full sunlight: consequences for the antioxidant defence system

    Science.gov (United States)

    Fini, Alessio; Guidi, Lucia; Giordano, Cristiana; Baratto, Maria Camilla; Ferrini, Francesco; Brunetti, Cecilia; Calamai, Luca; Tattini, Massimiliano

    2014-01-01

    Background and Aims A major challenge in plant ecophysiology is understanding the effects of multiple sub-optimal environmental conditions on plant performance. In most Mediterranean areas soil salinity builds up during the summer because of low availability of soil water coupled with hot temperatures. Although sunlight and soil salinity may strongly interact in determining a plant's performance, this has received relatively little attention. Methods Two-year-old seedlings of Fraxinus ornus were grown outdoors in pots during a Mediterranean summer in either 45 % (shaded plants) or 100 % (sun plants) sunlight irradiance and were supplied with either deionized water or deionized water plus 75 mm NaCl. Morpho-anatomical traits, water and ionic relations, gas exchange and photosystem II performance, concentrations of individual carotenoids, activity of antioxidant enzymes, concentrations of ascorbic acid and individual polyphenols were measured in leaves. Leaf oxidative stress and damage were estimated by in vivo analysis of stable free radicals and ultrastructural analyses. Key Results Leaf concentrations of potentially toxic ions did not markedly differ in shaded or sun plants in response to salinity. Leaves of sun plants displayed superior water use efficiency compared with leaves of shaded plants, irrespective of salinity treatment, and had both better stomatal control and higher CO2 carboxylation efficiency than leaves of shaded plants. In the salt-treated groups, the adverse effects of excess midday irradiance were greater in shade than in sun plants. The activity of enzymes responsible for detoxifying hydrogen peroxide decreased in shaded plants and increased in sun plants as a result of salinity stress. In contrast, the activity of guaiacol peroxidase and the concentration of phenylpropanoids increased steeply in response to salinity in shaded plants but were unaffected in sun plants. Conclusions It is concluded that salinity may constrain the performance of

  2. Shade coffee: Update on a disappearing refuge for biodiversity

    OpenAIRE

    Jha, S; Bacon, CM; Philpott, SM; MÉndez, VE; LÄderach, P; Rice, RA

    2014-01-01

    In the past three decades, coffee cultivation has gained widespread attention for its crucial role in supporting local and global biodiversity. In this synthetic Overview, we present newly gathered data that summarize how global patterns in coffee distribution and shade vegetation have changed and discuss implications for biodiversity, ecosystem services, and livelihoods. Although overall cultivated coffee area has decreased by 8% since 1990, coffee production and agricultural intensification...

  3. Adaptive heating, ventilation and solar shading for dwellings

    OpenAIRE

    Alders, E.E.

    2017-01-01

    Calculation of various strategies for the heating of, and the prevention of overheating in, a Dutch standard dwelling that includes (automated) adaptive ventilation systems and solar shading to maintain indoor temperatures at acceptably comfortable temperatures informs this analysis of the costs, impacts and benefits of the use of related control opportunities and mechanisms at play. The energy saving potential of enabling occupants to take advantage of the adaptive opportunities embedded int...

  4. Recruitment advantage of large seeds is greater in shaded habitats

    OpenAIRE

    Bruun, Hans Henrik; ten Brink, Dirk-Jan

    2008-01-01

    Large seeds are assumed to have higher probability of successful recruitment than small seeds. This is because larger seeds give rise to larger seedlings and larger seedlings better withstand environmental hazards like deep shade and drought. Biotic and abiotic limitations to seedling growth and survival, and conversely availability of safe sites for recruitment, vary along environmental gradients and between habitat types. Thus, the value to plant species of possessing large seeds may differ...

  5. Quality and Quantity Evaluations of Shade Grown Forages

    Science.gov (United States)

    K. P. Ladyman; M. S. Kerley; R. L. Kallenbach; H. E. Garrett; J. W. Van Sambeek; N. E. Navarrete-Tindall

    2003-01-01

    Seven legumes were grown during the summer-fall of 2000, at the Horticulture and Agroforestry Research Center (39? 01 ' N, 92? 46' W) near New Franklin, MO. The forages were grown in 7.5L white pots placed on light-colored gravel either under full sunlight, 45% sunlight, or 20% sunlight created by a shade cloth over a rectangular frame. Drip irrigation was...

  6. Optimal Packed String Matching

    DEFF Research Database (Denmark)

    Ben-Kiki, Oren; Bille, Philip; Breslauer, Dany

    2011-01-01

    In the packed string matching problem, each machine word accommodates – characters, thus an n-character text occupies n/– memory words. We extend the Crochemore-Perrin constantspace O(n)-time string matching algorithm to run in optimal O(n/–) time and even in real-time, achieving a factor – speedup...... over traditional algorithms that examine each character individually. Our solution can be efficiently implemented, unlike prior theoretical packed string matching work. We adapt the standard RAM model and only use its AC0 instructions (i.e., no multiplication) plus two specialized AC0 packed string...

  7. Production of tropical forage grasses under different shading levels

    Directory of Open Access Journals (Sweden)

    Francisco Eduardo Torres

    2017-12-01

    Full Text Available This study aimed to evaluate the forage production of three tropical forage grasses under different shading levels. The experiment was conducted in a greenhouse at Universidade Estadual de Mato Grosso do Sul, University Unit of Aquidauana (UEMS/UUA, in a soil classified as Ultisol sandy loam texture. The treatments consisted of three grasses species combinations (B. brizantha cv. Marandu, B. decumbens cv. Basilisck and Panicum maximum cv. Tanzania, submitted to four shading levels (0, 30, 50 and 75%, arranged in a completely randomized blocks design in a factorial 3 x 4, with eight replications. After harvest, the plants were separated into shoot and roots for determination of shoot fresh mass (SFM, shoot dry mass (SDM and roots dry mass production. After analysis of variance, the qualitative factor was subjected to comparison of averages by Tukey’s test, and the quantitative factor to analysis of polynomial regression, being interactions appropriately unfolded. It was verified that B. decumbens, by its linearly increasing production of forage and less decrease of root formation, is the most recommended for shading conditions compared to grasses Tanzania and Marandu.

  8. Ecophysiological studies on photosynthesis and pigment adaptation of light and shade leaves; Oekophysiologische Untersuchungen zur Photosynthese und Pigment-Adaptation bei Licht- und Schattenblaettern

    Energy Technology Data Exchange (ETDEWEB)

    Knapp, M.

    2005-07-01

    Photosynthetic function and pigment adaptation, as well as several other leaf parameters of light and shade adapted leaves of trees were studied under different environmental conditions. These measurements were performed primarily on a solitary standing beech during a summer drought stress period and an autumnal partial regeneration of physiological activity. Mainly investigated were beech leaves, sun leaves growing at the south side of the tree and shade leaves from the interior of the crown, since beech leaves show the strongest physiological light and shade adaptation responses among all deciduous trees. Similar adaptation studies were also performed with red, light-exposed, anthocyanin-containing leaves of the herbaceous purple foliage plant Perilla (beefsteak plant, Chinese basil) and some other plant species with either slightly or more red leaves, in order to check whether the accumulation of anthocyanins in the upper leaf epidermis of sun exposed-leaves blocks the high-light induced formation of sun-type chloroplasts. The latter are known to possess a much higher photosynthetic capacity and a different pigment composition as compared to shade-type chloroplasts of shaded green leaves. Special consideration was given to the natural drought stress effects usually occurring in the summer period (ca. end of July to end of August), caused by a combination of unfavourable weather conditions, such as a longer heat stress, with strong solar radiation and a very low rain precipitation lying clearly below the annual mean. The obtained research results provided new facts for a better understanding of the physiology of photosynthesis in sun and shade leaves of beech at both normal physiological conditions (June) and at environmental stress conditions (July, August), as well as the effect of anthocyanins on the formation of sun-type chloroplasts and their photosynthetic pigments (chlorophylls and carotenoids) in light-exposed purple foliage. (orig.)

  9. The art of being flexible: how to escape from shade, salt and drought : The art of being flexible: how to excape from shade, salt and drought

    NARCIS (Netherlands)

    Pierik, Ronald; Testerink, C.

    2014-01-01

    Environmental stresses, such as shading of the shoot, drought, and soil salinity, threaten plant growth, yield, and survival. Plants can alleviate the impact of these stresses through various modes of phenotypic plasticity, such as shade avoidance and halotropism. Here, we review the current state

  10. Best Practices for NPT Transit Matching

    Energy Technology Data Exchange (ETDEWEB)

    Gilligan, Kimberly V. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Whitaker, J. Michael [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Oakberg, John A. [Tetra Tech, Inc., Oak Ridge, TN (United States); Snow, Catherine [Sno Consulting, LLC, Sandy, UT (United States)

    2016-09-01

    Transit matching is the process for relating or matching reports of shipments and receipts submitted to the International Atomic Energy Agency (IAEA). Transit matching is a component used by the IAEA in drawing safeguards conclusions and performing investigative analysis. Transit matching is part of IAEA safeguards activities and the State evaluation process, and it is included in the annual Safeguards Implementation Report (SIR). Annually, the IAEA currently receives reports of ~900,000 nuclear material transactions, of which ~500,000 are for domestic and foreign transfers. Of these the IAEA software can automatically match (i.e., machine match) about 95% of the domestic transfers and 25% of the foreign transfers. Given the increasing demands upon IAEA resources, it is highly desirable for the machine-matching process to match as many transfers as possible. Researchers at Oak Ridge National Laboratory (ORNL) have conducted an investigation funded by the National Nuclear Security Administration through the Next Generation Safeguards Initiative to identify opportunities to strengthen IAEA transit matching. Successful matching, and more specifically machine matching, is contingent on quality data from the reporting States. In February 2016, ORNL hosted representatives from three States, the IAEA, and Euratom to share results from past studies and to discuss the processes, policies, and procedures associated with State reporting for transit matching. Drawing on each entity's experience and knowledge, ORNL developed a best practices document to be shared with the international safeguards community to strengthen transit matching. This paper shares the recommendations that resulted from this strategic meeting and the next steps being taken to strengthen transit matching.

  11. Probabilistic seismic history matching using binary images

    Science.gov (United States)

    Davolio, Alessandra; Schiozer, Denis Jose

    2018-02-01

    Currently, the goal of history-matching procedures is not only to provide a model matching any observed data but also to generate multiple matched models to properly handle uncertainties. One such approach is a probabilistic history-matching methodology based on the discrete Latin Hypercube sampling algorithm, proposed in previous works, which was particularly efficient for matching well data (production rates and pressure). 4D seismic (4DS) data have been increasingly included into history-matching procedures. A key issue in seismic history matching (SHM) is to transfer data into a common domain: impedance, amplitude or pressure, and saturation. In any case, seismic inversions and/or modeling are required, which can be time consuming. An alternative to avoid these procedures is using binary images in SHM as they allow the shape, rather than the physical values, of observed anomalies to be matched. This work presents the incorporation of binary images in SHM within the aforementioned probabilistic history matching. The application was performed with real data from a segment of the Norne benchmark case that presents strong 4D anomalies, including softening signals due to pressure build up. The binary images are used to match the pressurized zones observed in time-lapse data. Three history matchings were conducted using: only well data, well and 4DS data, and only 4DS. The methodology is very flexible and successfully utilized the addition of binary images for seismic objective functions. Results proved the good convergence of the method in few iterations for all three cases. The matched models of the first two cases provided the best results, with similar well matching quality. The second case provided models presenting pore pressure changes according to the expected dynamic behavior (pressurized zones) observed on 4DS data. The use of binary images in SHM is relatively new with few examples in the literature. This work enriches this discussion by presenting a new

  12. Analysis of Selected Photovoltaic Panels Operating Parameters as a Function of Partial Shading and Intensity of Reflected Radiation

    Directory of Open Access Journals (Sweden)

    Bilčík Matúš

    2018-03-01

    Full Text Available Due to expansion of utilisation of photovoltaics in ordinary households, the question arises how this phenomenon affects the electric power of photovoltaic modules. The article deals with the electric power analysis of photovoltaic modules as a function of two very important factors. The first examined factor was partial shading, and the second factor was the intensity of reflected radiation. In order to determine the dependence of module power on the aforementioned parameters, a measurement system under laboratory conditions has been prepared. For identification of the reflected radiation effect on the power of the photovoltaic module, a series of measurements was performed on 7 different surfaces with the same radiation source. It is evident from obtained experimental result that the ratio of reflected irradiation on the solar module power is 1.29%. By simulation of partial shading of photovoltaic module, the decrease of 86.15% in its output power was identified.

  13. Particle swarm optimization based solar PV array reconfiguration of the maximum power extraction under partial shading conditions

    DEFF Research Database (Denmark)

    Babu, Thanikanti Sudhakar; Ram, J. Prasanth; Dragicevic, Tomislav

    2018-01-01

    shade patterns are carried out and thorough analysis with the help of I–V, P–V curves is carried out to support the usefulness of the proposed method. The effectiveness of proposed PSO technique is evaluated via performance analysis based on energy saving and income generation. Further, a comprehensive......For large photovoltaic power generation plants, number of panels are interconnected in series and parallel to form a photovoltaic (PV) array. In this configuration, partial shade will result in decrease in power output and introduce multiple peaks in the P–V curve. As a consequence, the modules...... in the array will deliver different row currents. Therefore, to maximize the power extraction from PV array, the panels need to be reconfigured for row current difference minimization. Row current minimization via Su Do Ku game theory do physical relocation of panels may cause laborious work and lengthy...

  14. Pediatric MATCH Infographic

    Science.gov (United States)

    Infographic explaining NCI-COG Pediatric MATCH, a cancer treatment clinical trial for children and adolescents, from 1 to 21 years of age, that is testing the use of precision medicine for pediatric cancers.

  15. Tackling the challenges of matching biomedical ontologies.

    Science.gov (United States)

    Faria, Daniel; Pesquita, Catia; Mott, Isabela; Martins, Catarina; Couto, Francisco M; Cruz, Isabel F

    2018-01-15

    Biomedical ontologies pose several challenges to ontology matching due both to the complexity of the biomedical domain and to the characteristics of the ontologies themselves. The biomedical tracks in the Ontology Matching Evaluation Initiative (OAEI) have spurred the development of matching systems able to tackle these challenges, and benchmarked their general performance. In this study, we dissect the strategies employed by matching systems to tackle the challenges of matching biomedical ontologies and gauge the impact of the challenges themselves on matching performance, using the AgreementMakerLight (AML) system as the platform for this study. We demonstrate that the linear complexity of the hash-based searching strategy implemented by most state-of-the-art ontology matching systems is essential for matching large biomedical ontologies efficiently. We show that accounting for all lexical annotations (e.g., labels and synonyms) in biomedical ontologies leads to a substantial improvement in F-measure over using only the primary name, and that accounting for the reliability of different types of annotations generally also leads to a marked improvement. Finally, we show that cross-references are a reliable source of information and that, when using biomedical ontologies as background knowledge, it is generally more reliable to use them as mediators than to perform lexical expansion. We anticipate that translating traditional matching algorithms to the hash-based searching paradigm will be a critical direction for the future development of the field. Improving the evaluation carried out in the biomedical tracks of the OAEI will also be important, as without proper reference alignments there is only so much that can be ascertained about matching systems or strategies. Nevertheless, it is clear that, to tackle the various challenges posed by biomedical ontologies, ontology matching systems must be able to efficiently combine multiple strategies into a mature matching

  16. Assessment of microclimate conditions under artificial shades in a ginseng field

    Science.gov (United States)

    Lee, Kyu Jong; Lee, Byun-Woo; Kang, Je Yong; Lee, Dong Yun; Jang, Soo Won; Kim, Kwang Soo

    2015-01-01

    Background Knowledge on microclimate conditions under artificial shades in a ginseng field would facilitate climate-aware management of ginseng production. Methods Weather data were measured under the shade and outside the shade at two fields located in Gochang-gun and Jeongeup-si, Korea, in 2011 and 2012 seasons to assess temperature and humidity conditions under the shade. An empirical approach was developed and validated for the estimation of leaf wetness duration (LWD) using weather measurements outside the shade as inputs to the model. Results Air temperature and relative humidity were similar between under the shade and outside the shade. For example, temperature conditions favorable for ginseng growth, e.g., between 8°C and 27°C, occurred slightly less frequently in hours during night times under the shade (91%) than outside (92%). Humidity conditions favorable for development of a foliar disease, e.g., relative humidity > 70%, occurred slightly more frequently under the shade (84%) than outside (82%). Effectiveness of correction schemes to an empirical LWD model differed by rainfall conditions for the estimation of LWD under the shade using weather measurements outside the shade as inputs to the model. During dew eligible days, a correction scheme to an empirical LWD model was slightly effective (10%) in reducing estimation errors under the shade. However, another correction approach during rainfall eligible days reduced errors of LWD estimation by 17%. Conclusion Weather measurements outside the shade and LWD estimates derived from these measurements would be useful as inputs for decision support systems to predict ginseng growth and disease development. PMID:26843827

  17. Shade material evaluation using a cattle response model and meteorological instrumentation.

    Science.gov (United States)

    Eigenberg, Roger A; Brown-Brandl, Tami M; Nienaber, John A

    2010-11-01

    Shade structures are often considered as one method of reducing stress in feedlot cattle. Selection of a suitable shade material can be difficult without data that quantify material effectiveness for stress reduction. A summer study was conducted during 2007 using instrumented shade structures in conjunction with meteorological measurements to estimate relative effectiveness of various shade materials. Shade structures were 3.6 m by 6.0 m by 3.0 m high at the peak and 2.0 m high at the sides. Polyethylene shade cloth was used in three of the comparisons and consisted of effective coverings of 100%, 60% with a silver reflective coating, and 60% black material with no reflective coating. Additionally, one of the structures was fitted with a poly snow fence with an effective shade of about 30%. Each shade structure contained a solar radiation meter and a black globe thermometer to measure radiant energy received under the shade material. Additionally, meteorological data were collected as a non-shaded treatment and included temperature, humidity, wind speed, and solar radiation. Data analyses was conducted using a physiological model based on temperature, humidity, solar radiation and wind speed; a second model using black globe temperatures, relative humidity, and wind speed was used as well. Analyses of the data revealed that time spent in the highest stress category was reduced by all shade materials. Moreover, significant differences (P < 0.05) existed between all shade materials (compared to no-shade) for hourly summaries during peak daylight hours and for 'full sun' days.

  18. Fingerprint Matching Using Minutiae Quadruplets | Iloanusi ...

    African Journals Online (AJOL)

    Fingerprint matching faces several challenges resulting from the varying quality of fingerprint scanners, the weakness of some scanners in detecting fake fingerprints and the poor performance of fingerprint matching algorithms caused by the high intraclass variations between fingerprints of the same subject. The major ...

  19. Behavioral ecology of Heteragrion consors Hagen (Odonata, Megapodagrionidae: a shade-seek Atlantic forest damselfly

    Directory of Open Access Journals (Sweden)

    Geovanni Ribeiro Loiola

    2011-09-01

    Full Text Available Behavioral ecology of Heteragrion consors Hagen (Odonata: Megapodagrionidae: a shade-seek Atlantic forest damselfly. The intensity of the inter and intra-sexual selection can affect male behavioral traits as territorial fidelity and aggressiveness allowing the existence of different strategies. However, its differential success could be affected by environmental - as the diel variation in temperature - and physiological constrains - as the variation in thermoregulatory abilities. In this context, we present a behavioral analysis of Heteragrion consors (Zygoptera, Megapodagrionidae trying to characterize its mating system, diel activity pattern, temporal budget, territoriality and reproductive biology. These data were obtained based on field observations using the focal individual method and mark-recapture techniques in 120 m of a shaded Atlantic Forest stream in Brazil. The males of this species were territorial, varying in its local fidelity, while the females appear sporadically. Males were perched in the majority of the time, but were also observed in cleaning movements, longitudinal abdominal flexion, wing flexion and sperm transfer during perch. The males presented a perched thermoregulatory behavior related to an exothermic regulation. Foraging and agonistic interactions were rare, but dominate the other behavioral activities. Abdominal movements associated to long lasting copula pointed to the existence of sperm competition in this species. Males performed contact post-copulatory guarding of the females. These observations pointed to a non-resource mating system for this species.

  20. Hindwings of insects as concept generator for hingeless foldable shading systems.

    Science.gov (United States)

    Schieber, Gundula; Born, Larissa; Bergmann, Paavo; Körner, Axel Hannes; Mader, Anja; Saffarian, Saman; Betz, Oliver; Milwich, Markus; Gresser, Goetz; Knippers, Jan

    2017-11-02

    Hingeless shading systems inspired by nature are increasingly the focus of architectural research. In contrast to traditional systems, these compliant mechanisms can reduce the amount of maintenance-intensive parts and can easily be adapted to irregular, doubly curved, facade geometries. Previous mechanisms rely merely on the reversible material deformation of composite structures with almost homogeneous material properties. This leads to large actuation forces and an inherent conflict between the requirements of movement and the capacity to carry external loads. To enhance the performance of such systems, current research is directed at natural mechanisms with concentrated compliance and distinct hinge zones with high load-bearing capacity. Here, we provide insights into our biological findings and the development of a deployable structure inspired by the Flexagon model of hindwings of insects in general and the hierarchical structure of the wing cuticle of the shield bug (Graphosoma lineatum). By using technical fibre-reinforced plastics in combination with an elastomer foil, natural principles have been partially transferred into a multi-layered structure with locally adapted stiffness. Initial small prototypes have been produced in a vacuum-assisted hot press and sustain this functionality. Initial theoretical studies on test surfaces outline the advantages of these bio-inspired structures as deployable external shading systems for doubly curved facades. © 2017 IOP Publishing Ltd.

  1. Analysis and Modeling of Parallel Photovoltaic Systems under Partial Shading Conditions

    Science.gov (United States)

    Buddala, Santhoshi Snigdha

    Since the industrial revolution, fossil fuels like petroleum, coal, oil, natural gas and other non-renewable energy sources have been used as the primary energy source. The consumption of fossil fuels releases various harmful gases into the atmosphere as byproducts which are hazardous in nature and they tend to deplete the protective layers and affect the overall environmental balance. Also the fossil fuels are bounded resources of energy and rapid depletion of these sources of energy, have prompted the need to investigate alternate sources of energy called renewable energy. One such promising source of renewable energy is the solar/photovoltaic energy. This work focuses on investigating a new solar array architecture with solar cells connected in parallel configuration. By retaining the structural simplicity of the parallel architecture, a theoretical small signal model of the solar cell is proposed and modeled to analyze the variations in the module parameters when subjected to partial shading conditions. Simulations were run in SPICE to validate the model implemented in Matlab. The voltage limitations of the proposed architecture are addressed by adopting a simple dc-dc boost converter and evaluating the performance of the architecture in terms of efficiencies by comparing it with the traditional architectures. SPICE simulations are used to compare the architectures and identify the best one in terms of power conversion efficiency under partial shading conditions.

  2. Experimental Analysis of Cool Traditional Solar Shading Systems for Residential Buildings

    Directory of Open Access Journals (Sweden)

    Anna Laura Pisello

    2015-03-01

    Full Text Available In recent years there has been a growing interest in the development and thermal-energy analysis of passive solutions for reducing building cooling needs and thus improving indoor thermal comfort conditions. In this view, several studies were carried out about cool roofs and cool coatings, producing acknowledged mitigation effects on urban heat island phenomenon. The purpose of this work is to investigate the thermal-energy performance of cool louvers of shutters, usually installed in residential buildings, compared to dark color traditional shading systems. To this aim, two full-scale prototype buildings were continuously monitored under summer conditions and the role of the cool shutter in reducing the overheating of the shading system and the energy requirements for cooling was analyzed. After an in-lab optical analysis of the cool coating, showing a huge solar reflectance increase with respect to the traditional configuration, i.e., by about 75%, field monitoring results showed that the cool shutter is able to decrease the indoor air temperature up to 2 °C under free floating conditions. The corresponding energy saving was about 25%, with even much higher peaks during very hot summer conditions.

  3. The Ratio of Leaf to Total Photosynthetic Area Influences Shade Survival and Plastic Response to Light of Green‐stemmed Leguminous Shrub Seedlings

    Science.gov (United States)

    VALLADARES, FERNANDO; HERNÁNDEZ, LIBERTAD G.; DOBARRO, IKER; GARCÍA‐PÉREZ, CRISTINA; SANZ, RUBÉN; PUGNAIRE, FRANCISCO I.

    2003-01-01

    Different plant species and organs within a plant differ in their plastic response to light. These responses influence their performance and survival in relation to the light environment, which may range from full sunlight to deep shade. Plasticity, especially with regard to physiological features, is linked to a greater capacity to exploit high light and is usually low in shade‐tolerant species. Among photosynthetic organs, green stems, which represent a large fraction of the total photosynthetic area of certain species, are hypothesized to be less capable of adjustment to light than leaves, because of biomechanical and hydraulic constraints. The response to light by leaves and stems of six species of leguminous, green‐stemmed shrubs from dry and high‐light environments was studied by growing seedlings in three light environments: deep shade, moderate shade and sun (3, 30 and 100 % of full sunlight, respectively). Survival in deep shade ranged from 2 % in Retama sphaerocarpa to 74 % in Ulex europaeus. Survival was maximal at moderate shade in all species, ranging from 80 to 98 %. The six species differed significantly in their ratio of leaf to total photosynthetic area, which influenced their light response. Survival in deep shade increased significantly with increasing ratio of leaf to total photosynthetic area, and decreased with increasing plasticity in net photosynthesis and dark respiration. Responses to light differed between stems and leaves within each species. Mean phenotypic plasticity for the variables leaf or stem specific mass, chlorophyll content, chlorophyll a/b ratio, and carotenoid to chlorophyll ratio of leaves, was inversely related to that of stems. Although mean plasticity of stems increased with the ratio of leaf to total photosynthetic area, the mean plasticity of leaves decreased. Shrubs with green stems and a low ratio of leaf to total photosynthetic area are expected to be restricted to well‐lit habitats, at least during the

  4. Cost and Benefit Tradeoffs in Using a Shade Tree for Residential Building Energy Saving

    Directory of Open Access Journals (Sweden)

    Sappinandana Akamphon

    2014-01-01

    Full Text Available Global warming and urban heat islands result in increased cooling energy consumption in buildings. Previous literature shows that planting trees to shade a building can reduce its cooling load. This work proposes a model to determine the cost effectiveness and profitability of planting a shade tree by considering both its potential to reduce cooling energy and its purchase and maintenance cost. A comparison between six selected tree species is used for illustration. Using growth rates, crown sizes, and shading coefficients, cooling energy savings from the tree shades are computed using an industrial-standard building energy simulation program, offset by costs of purchase, planting, and maintenance of these trees. The result shows that most worthwhile tree to plant should have high shading coefficient and moderate crown size to maximize shading while keeping the maintenance costs manageable.

  5. Effects of shading on dry matter partitioning and yield of field-grown sunflower

    International Nuclear Information System (INIS)

    Villalobos, F.J.; Soriano, A.; Fereres, E.

    1992-01-01

    Crop simulation models require quantitative descriptions of the effects of irradiance on dry matter partition and yield. The objective of this work was to quantify the effects of reduced radiation intensity during different phenological stages on the growth, dry matter partitioning and grain numbers of sunflower (Helianthus annuus, L.). A field experiment was carried out in 1990 with 50 per cent shading treatments. The earliest treatment began at crop emergence while the latest ended at first anthesis. Shading had little effect on plant leaf area growth but reduced biomass and yield. The dry matter: radiation quotient and specific leaf area increased with shading. Grain number per head was decreased by shading, with the greatest effect occurring when shading was applied prior to anthesis. All shading treatments increased dry matter partitioning to stems, decreased assimilate partitioning to the heads and had no effect on the partitioning to leaves. (author)

  6. Effects of shading time on quality of matcha and matcha cake

    Directory of Open Access Journals (Sweden)

    LI Hui

    2014-12-01

    Full Text Available Effects of shading time on the quality of Matcha and the Matcha cake.It showed that shading could help the systhesis of nitrogen compounds such as amino acids,caffeine chlorophyll and protein,but couldn′t favor accumulation of tea polyphenol and polysaccharides.The more shading time was,the more chlorophyll content would be,and the more green of Matcha color would be.After Matcha cake was baked,the green color reduced.The colors of Macha cake are greener with longer shading time.Thus,the length of Shading time has obvious effect on the green tea and the tea cake quality,We can adjust the Matcha cake taste,flavor and color by adding Matcha from different shading time.

  7. Face recognition using ensemble string matching.

    Science.gov (United States)

    Chen, Weiping; Gao, Yongsheng

    2013-12-01

    In this paper, we present a syntactic string matching approach to solve the frontal face recognition problem. String matching is a powerful partial matching technique, but is not suitable for frontal face recognition due to its requirement of globally sequential representation and the complex nature of human faces, containing discontinuous and non-sequential features. Here, we build a compact syntactic Stringface representation, which is an ensemble of strings. A novel ensemble string matching approach that can perform non-sequential string matching between two Stringfaces is proposed. It is invariant to the sequential order of strings and the direction of each string. The embedded partial matching mechanism enables our method to automatically use every piece of non-occluded region, regardless of shape, in the recognition process. The encouraging results demonstrate the feasibility and effectiveness of using syntactic methods for face recognition from a single exemplar image per person, breaking the barrier that prevents string matching techniques from being used for addressing complex image recognition problems. The proposed method not only achieved significantly better performance in recognizing partially occluded faces, but also showed its ability to perform direct matching between sketch faces and photo faces.

  8. Effects of shade on growth, production and quality of coffee (Coffea arabica) in Ethiopia

    OpenAIRE

    Bote, A.D.; Struik, P.C.

    2011-01-01

    The research work was conducted to evaluate the effect of shade on growth and production of coffee plants. To achieve this, growth and productivity of coffee plants growing under shade trees were compared with those of coffee plants growing under direct sun light. Different physiological, environmental and quality parameters were assessed for both treatments. Shade trees protected coffee plants against adverse environmental stresses such as high soil temperatures and low relative humidity. Sh...

  9. Simulation and experimental study of power losses due to shading and soiling on photovoltaic (PV) modules

    OpenAIRE

    Pettersen, Anna Derås

    2015-01-01

    A model for predicting and quantifying the effects of complex partial shading profiles on a PV-module has been constructed by using the simulation tool LTspice IV. The model is constructed according to the two-diode model equivalent circuit for solar cells. Technical specifications from REC255PE were implemented in the model, and partial shade was simulated by applying shade normal to the strings, and along the strings on the module. An experimental basis has been established for quantify...

  10. Cacao Cultivation under Diverse Shade Tree Cover Allows High Carbon Storage and Sequestration without Yield Losses.

    Science.gov (United States)

    Abou Rajab, Yasmin; Leuschner, Christoph; Barus, Henry; Tjoa, Aiyen; Hertel, Dietrich

    2016-01-01

    One of the main drivers of tropical forest loss is their conversion to oil palm, soy or cacao plantations with low biodiversity and greatly reduced carbon storage. Southeast Asian cacao plantations are often established under shade tree cover, but are later converted to non-shaded monocultures to avoid resource competition. We compared three co-occurring cacao cultivation systems (3 replicate stands each) with different shade intensity (non-shaded monoculture, cacao with the legume Gliricidia sepium shade trees, and cacao with several shade tree species) in Sulawesi (Indonesia) with respect to above- and belowground biomass and productivity, and cacao bean yield. Total biomass C stocks (above- and belowground) increased fivefold from the monoculture to the multi-shade tree system (from 11 to 57 Mg ha-1), total net primary production rose twofold (from 9 to 18 Mg C ha-1 yr-1). This increase was associated with a 6fold increase in aboveground biomass, but only a 3.5fold increase in root biomass, indicating a clear shift in C allocation to aboveground tree organs with increasing shade for both cacao and shade trees. Despite a canopy cover increase from 50 to 93%, cacao bean yield remained invariant across the systems (variation: 1.1-1.2 Mg C ha-1 yr-1). The monocultures had a twice as rapid leaf turnover suggesting that shading reduces the exposure of cacao to atmospheric drought, probably resulting in greater leaf longevity. Thus, contrary to general belief, cacao bean yield does not necessarily decrease under shading which seems to reduce physical stress. If planned properly, cacao plantations under a shade tree cover allow combining high yield with benefits for carbon sequestration and storage, production system stability under stress, and higher levels of animal and plant diversity.

  11. Influence of surface layer removal of shade guide tabs on the measured color by spectrophotometer and spectroradiometer.

    Science.gov (United States)

    Kim, Jin-Cheol; Yu, Bin; Lee, Yong-Keun

    2008-12-01

    To determine the changes in color parameters of Vitapan 3D-Master shade guide tabs by a spectrophotometer (SP) or a spectroradiometer (SR), and by the removal of the surface layer of the tabs that was performed to make a flat measuring surface for the SP color measurement. Color of the shade tabs was measured before and after removing the surface layer of the tabs using SP and SR. Correlations between the color parameters between the original (OR) and the surface layer removed (RM) tabs and between the SP and the SR measurements were determined (alpha=0.05). Based on SP, the lightness, chroma, CIE a* and b* values measured after the surface layer removal were higher than those of the original tabs except a few cases. Based on SR, the chroma and CIE a* and b* values measured after surface layer removal were higher than those of the original tabs except a few cases; however, in case of the lightness, the changes varied by the shade designation. Type of instrument influenced the changes in color parameters based on paired t-test (pspectrophotometer or a spectroradiometer, measurement protocols should be specified because color difference by the surface layer removal and the instrument was high.

  12. Attenuation of the jasmonate burst, plant defensive traits, and resistance to specialist monarch caterpillars on shaded common milkweed (Asclepias syriaca).

    Science.gov (United States)

    Agrawal, Anurag A; Kearney, Emily E; Hastings, Amy P; Ramsey, Trey E

    2012-07-01

    Plant responses to herbivory and light competition are often in opposing directions, posing a potential conflict for plants experiencing both stresses. For sun-adapted species, growing in shade typically makes plants more constitutively susceptible to herbivores via reduced structural and chemical resistance traits. Nonetheless, the impact of light environment on induced resistance has been less well-studied, especially in field experiments that link physiological mechanisms to ecological outcomes. Accordingly, we studied induced resistance of common milkweed (Asclepias syriaca, a sun-adapted plant), and linked hormonal responses, resistance traits, and performance of specialist monarch caterpillars (Danaus plexippus) in varying light environments. In natural populations, plants growing under forest-edge shade showed reduced levels of resistance traits (lower leaf toughness, cardenolides, and trichomes) and enhanced light-capture traits (higher specific leaf area, larger leaves, and lower carbon-to-nitrogen ratio) compared to paired plants in full sun. In a field experiment repeated over two years, only milkweeds growing in full sun exhibited induced resistance to monarchs, whereas plants growing in shade were constitutively more susceptible and did not induce resistance. In a more controlled field experiment, plant hormones were higher in the sun (jasmonic acid, salicylic acid, abscisic acid, indole acidic acid) and were induced by herbivory (jasmonic acid and abscisic acid). In particular, the jasmonate burst following herbivory was halved in plants raised in shaded habitats, and this correspondingly reduced latex induction (but not cardenolide induction). Thus, we provide a mechanistic basis for the attenuation of induced plant resistance in low resource environments. Additionally, there appears to be specificity in these interactions, with light-mediated impacts on jasmonate-induction being stronger for latex exudation than cardenolides.

  13. Schema matching and mapping

    CERN Document Server

    Bellahsene, Zohra; Rahm, Erhard

    2011-01-01

    Requiring heterogeneous information systems to cooperate and communicate has now become crucial, especially in application areas like e-business, Web-based mash-ups and the life sciences. Such cooperating systems have to automatically and efficiently match, exchange, transform and integrate large data sets from different sources and of different structure in order to enable seamless data exchange and transformation. The book edited by Bellahsene, Bonifati and Rahm provides an overview of the ways in which the schema and ontology matching and mapping tools have addressed the above requirements

  14. Soil Bacterial Diversity and Productivity of Coffee - Shade Tree Agro-ecosystems

    Directory of Open Access Journals (Sweden)

    Rusdi Evizal

    2012-05-01

    Full Text Available Coffee productions should have environmental values such as providing high soil microbial diversity while producinghigh yield. To examine that purposes, two experimental plots were constucted at benchmark site of Conservationand Sustainable Management of Below-Ground Biodiversity (CSM-BGBD, in Sumberjaya Subdistrict, WestLampung, Indonesia, during 2007-2010. Types of coffee agro-ecosystem to be examined were Coffea canephorawith shade trees of Gliricidia sepium, Erythrina sububrams, Michelia champaca, and no shade. Two plots wereconstructed at 5-years-coffee and 15-years-coffee. Diversity of soil bacteria was determined based on DNA fingerprinting of total soil bacteria using Ribosomal Intergenic Spacer Analysis (RISA method. The results showed that:(1 For mature coffee (15 years old, shade-grown coffee agro-ecosystems had higher soil bacterial diversity thanthose of no shade coffee agro-ecosystem, (2 Shaded coffee agro-ecosystems were able to conserve soil bacterialdiversity better than no-shade coffee agro-ecosystem. Soil organic C and total litter biomass had positive effect onsoil bacterial diversity, (3 Types of agro-ecosystem significantly affected the bean yield of 15 years coffee. Coffeeagro-ecosystems shaded by legume trees had higher yield than those of non-legume shade and no shade coffeeagro-ecosystem, (4 Shannon-Weaver indices of soil bacterial diversity together with weed biomass and N contentof coffee leaf had positive effect on coffee bean yield.

  15. University Reactor Matching Grants Program

    International Nuclear Information System (INIS)

    John Valentine; Farzad Rahnema; Said Abdel-Khalik

    2003-01-01

    During the 2002 Fiscal year, funds from the DOE matching grant program, along with matching funds from the industrial sponsors, have been used to support research in the area of thermal-hydraulics. Both experimental and numerical research projects have been performed. Experimental research focused on two areas: (1) Identification of the root cause mechanism for axial offset anomaly in pressurized water reactors under prototypical reactor conditions, and (2) Fluid dynamic aspects of thin liquid film protection schemes for inertial fusion reactor chambers. Numerical research focused on two areas: (1) Multi-fluid modeling of both two-phase and two-component flows for steam conditioning and mist cooling applications, and (2) Modeling of bounded Rayleigh-Taylor instability with interfacial mass transfer and fluid injection through a porous wall simulating the ''wetted wall'' protection scheme in inertial fusion reactor chambers. Details of activities in these areas are given

  16. Esthetic restorative material shade changes due to photopolymerization.

    Science.gov (United States)

    Watanabe, Hidehiko; Covey, David

    2008-05-01

    This study sought to measure color values (before and after photopolymerization) and variations of A1 shade polymeric dental restorative materials. The L*a*b* values of polymeric dental restorative material disks were measured by a spectrophotometer with the specular component excluded (SCE) geometry under D65 illumination over a standardized white background before and after photopolymerization. Color differences (DeltaE*ab) due to polymerization were calculated using the CIE Lab color-difference formula. DeltaE*ab indicates differences between two colors in the L*a*b* color space. In this system, L*, a*, and b* indicate lightness, red-green, and yellow-blue, respectively. Color differences (DeltaE*ab) were calculated by the equation DeltaE*ab = [(DeltaL*)2 + (Deltaa*)2 + (Deltab*)2]1/2. Eight resin composites, three flowable resin composites (FRCs), and two resin-modified glass ionomers (RMGIs) were utilized; L*a*b* and DeltaE*ab values of the test groups were analyzed using ANOVA and Newman-Keuls multiple comparison tests. DeltaE*ab values before and after photopolymerization ranged from 3.01-17.76. All RMGI and two FRC materials displayed greater color changes than the resin composites (p < 0.05). Photopolymerization produced measurable increases and decreases in lightness. Yellow-blue (b*) values decreased in all test groups after polymerization, while most red-green (a*) values increased. Color differences between polymerized A1 shade materials ranged from 0.76-25.41 DeltaE*ab. The color difference between the test materials and a widely used tooth shade guide (the Vita Lumin) was averaged at 12.66 DeltaE*ab.

  17. Characteristic Evolution and Matching

    Directory of Open Access Journals (Sweden)

    Winicour Jeffrey

    2001-01-01

    Full Text Available I review the development of numerical evolution codes for general relativity based upon the characteristic initial value problem. Progress is traced from the early stage of 1D feasibility studies to current 3D codes that simulate binary black holes. A prime application of characteristic evolution is Cauchy-characteristic matching, which is also reviewed.

  18. Characteristic Evolution and Matching

    Directory of Open Access Journals (Sweden)

    Winicour Jeffrey

    1998-05-01

    Full Text Available We review the development of numerical evolution codes for general relativity based upon the characteristic initial value problem. Progress is traced from the early stage of 1D feasibility studies to current 3D black hole codes that run forever. A prime application of characteristic evolution is Cauchy-characteristic matching, which is also reviewed.

  19. Matching Supernovae to Galaxies

    Science.gov (United States)

    Kohler, Susanna

    2016-12-01

    developed a new automated algorithm for matching supernovae to their host galaxies. Their work builds on currently existing algorithms and makes use of information about the nearby galaxies, accounts for the uncertainty of the match, and even includes a machine learning component to improve the matching accuracy.Gupta and collaborators test their matching algorithm on catalogs of galaxies and simulated supernova events to quantify how well the algorithm is able to accurately recover the true hosts.Successful MatchingThe matching algorithms accuracy (purity) as a function of the true supernova-host separation, the supernova redshift, the true hosts brightness, and the true hosts size. [Gupta et al. 2016]The authors find that when the basic algorithm is run on catalog data, it matches supernovae to their hosts with 91% accuracy. Including the machine learning component, which is run after the initial matching algorithm, improves the accuracy of the matching to 97%.The encouraging results of this work which was intended as a proof of concept suggest that methods similar to this could prove very practical for tackling future survey data. And the method explored here has use beyond matching just supernovae to their host galaxies: it could also be applied to other extragalactic transients, such as gamma-ray bursts, tidal disruption events, or electromagnetic counterparts to gravitational-wave detections.CitationRavi R. Gupta et al 2016 AJ 152 154. doi:10.3847/0004-6256/152/6/154

  20. State of otolaryngology match: has competition increased since the "early" match?

    Science.gov (United States)

    Cabrera-Muffly, Cristina; Sheeder, Jeanelle; Abaza, Mona

    2015-05-01

    To examine fluctuations in supply and demand of otolaryngology residency positions after the shift from an "early match" coordinated by the San Francisco match to a "conventional" matching process through the National Residency Matching Program (NRMP). To determine whether competition among otolaryngology residency positions have changed during this time frame. Database analysis. Matching statistics from 1998 to 2013 were obtained for all first-year residency positions through the NRMP. Matching statistics from 1998 to 2005 were obtained for otolaryngology residency positions through the San Francisco match. Univariate analysis was performed, with a P value less than .05 determined as significant. The number of otolaryngology positions and applicants remained proportional to the overall number of positions and applicants in the NRMP match. Otolaryngology applicants per position and the matching rate of all applicants did not change between the 2 time periods studied. The overall match rate of US seniors applying to otolaryngology did not change, while the match rate of non-US seniors decreased significantly following initiation of the conventional match. There was no significant change in United States Medical Licensing Exam step 1 scores or percentage of unfilled otolaryngology residency positions between the 2 time periods. When comparing the early versus conventional otolaryngology match time periods, the only major change was the decreased percentage of matching among non-US senior applicants. Despite a significant shift in match timing after 2006, the supply, demand, and competitiveness of otolaryngology residency positions have not changed significantly. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

  1. [Propensity score matching in SPSS].

    Science.gov (United States)

    Huang, Fuqiang; DU, Chunlin; Sun, Menghui; Ning, Bing; Luo, Ying; An, Shengli

    2015-11-01

    To realize propensity score matching in PS Matching module of SPSS and interpret the analysis results. The R software and plug-in that could link with the corresponding versions of SPSS and propensity score matching package were installed. A PS matching module was added in the SPSS interface, and its use was demonstrated with test data. Score estimation and nearest neighbor matching was achieved with the PS matching module, and the results of qualitative and quantitative statistical description and evaluation were presented in the form of a graph matching. Propensity score matching can be accomplished conveniently using SPSS software.

  2. Effects of shading on relative competitive advantage of three species of Sphagnum

    Directory of Open Access Journals (Sweden)

    J.Z. Ma

    2015-06-01

    Full Text Available (1 Sphagnum is an important genus of bryophytes holding 10–15 % of the terrestrial carbon stock. With climate change a drier surface may increase the abundance of vascular plants on peatlands, so shading of Sphagnum may increase. Here we describe growth cabinet experiments to reveal the effects of shading on interactions among mixtures of three species: S. capillifolium, S. palustre (hummock species, and S. fallax (a hollow species. We measured the six traits: growth in length, growth as increase in dry mass, side-shoot production, nitrogen and carbon proportion of the capitulum dry mass, and C:N ratio in the capitulum. (2 Shading had no effect on biomass production or side-shoot production but increased height increment in all three species. It also increased the C and N proportions of total dry mass but decreased C:N ratio in the capitula. (3 Neighbours of a different species reduced biomass and side-shoot production in the two hummock species but had no effect on the hollow species. (4 All three species showed interaction between shading and neighbour in two or more plant traits. S. fallax showed competitive advantage over S. palustre in no-shading treatments and over S. capillifolium in moderate shading treatments. In addition, under deep shading, S. fallax showed a competitive advantage over both hummock species. A clear competitive hierarchy S. fallax>S. capillifolium>S. palustre emerged which was consistent with the hierarchy of side-shoot production. (5 The results suggest that all the species appear to tolerate deep shade (for a few months at least. In a shaded environment, especially under deeply shaded conditions, S. fallax retains its dominance in hollow habitats (if water availability is guaranteed by virtue of its advantage in side-shoot production. (6 If shading increases then the abundance of different Sphagnum species is likely to change.

  3. Effect of shade on photosynthetic pigments in the tropical root crops: yam, taro, tannia, cassava and sweet potato

    International Nuclear Information System (INIS)

    Johnston, M.; Onwueme, I.C.

    1998-01-01

    Plants of yam, taro, tannia, cassava and sweet potato were raised under shade or in full sunlight and the effect of shade on leaf chlorophyll and carotenoids was examined to determine and compare the relative shade tolerance and adaptability of the var ious species. All five species of root crops adapted to shade. The chlorophyll concentration was higher, while the chlorophyll a:b ratio, carotenoids per unit chlorophyll and the weight per unit area of leaf were lower in the shade than in the sun in yam, tannia, taro, cassava and sweet potato. All species had larger leaves and more chlorophyll per leaf in the shade. The extent of the changes, however, differed between species. The aroids (taro and tannia) appeared to be shade-tolerant species as their chlorophyll a:b ratios changed less than those of the other species in the shade, suggesting that their light-harvesting systems may be normally adapted to shade conditions. Taro and tannia also adapted to shade by a greater proportional increase in leaf size, a smaller reduction in leaf weight per unit area and a greater proportional increase in chlorophyll and carotenoids per leaf than the other species. Yam compensated for shade by having a large proportional increase in leaf size and appeared to be moderately tolerant of shade. Sweet potato and cassava appeared to be the least tolerant of shade of the major tropical root crops. (author)

  4. Efficiency study of different photovoltaic plant connection schemes under dynamic shading

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Reinoso, C.R.; Milone, D.H. [Centro de Investigacion y Desarrollo en Senales, Sistemas e Inteligencia Computacional (SINC), Facultad de Ing. y Ciencias Hidricas UNL-CONICET, Ciudad Universitaria (3000) Santa Fe (Argentina); Buitrago, R.H. [Instituto de Desarrollo Tecnologico para la Industria Quimica (INTEC) UNL-CONICET, Guemes 3450 (3000) Santa Fe (Argentina)

    2010-06-15

    An important growth in the power of the photovoltaic systems connected to a grid has recently been observed. In spite of the advances in module technology, the problems in the system design increased, especially regarding the surface of the earth they occupy. In this work we propose a complete model for plant simulation with different wiring diagrams and under dynamic shading. Results obtained from simulations showed that the configuration with the lowest performance was that of only one serial-parallel group, whereas the highest efficiency corresponded to a design of groups of modules in parallel connected then in series. In general, a higher efficiency was obtained diminishing the quantity of modules in series and increasing their number in parallel. The simulation model proposed allows exploring different alternatives of wiring modules and finding the most efficient configurations for photovoltaic plants of medium and high power. (author)

  5. SEMI-GLOBAL MATCHING IN OBJECT SPACE

    Directory of Open Access Journals (Sweden)

    F. Bethmann

    2015-03-01

    Full Text Available Semi-Global Matching (SGM is a widespread algorithm for image matching which is used for very different applications, ranging from real-time applications (e.g. for generating 3D data for driver assistance systems to aerial image matching. Originally developed for stereo-image matching, several extensions have been proposed to use more than two images within the matching process (multi-baseline matching, multi-view stereo. These extensions still perform the image matching in (rectified stereo images and combine the pairwise results afterwards to create the final solution. This paper proposes an alternative approach which is suitable for the introduction of an arbitrary number of images into the matching process and utilizes image matching by using non-rectified images. The new method differs from the original SGM method mainly in two aspects: Firstly, the cost calculation is formulated in object space within a dense voxel raster by using the grey (or colour values of all images instead of pairwise cost calculation in image space. Secondly, the semi-global (path-wise minimization process is transferred into object space as well, so that the result of semi-global optimization leads to index maps (instead of disparity maps which directly indicate the 3D positions of the best matches. Altogether, this yields to an essential simplification of the matching process compared to multi-view stereo (MVS approaches. After a description of the new method, results achieved from two different datasets (close-range and aerial are presented and discussed.

  6. PREDICTING THE MATCH OUTCOME IN ONE DAY INTERNATIONAL CRICKET MATCHES, WHILE THE GAME IS IN PROGRESS

    Directory of Open Access Journals (Sweden)

    Michael Bailey

    2006-12-01

    Full Text Available Millions of dollars are wagered on the outcome of one day international (ODI cricket matches, with a large percentage of bets occurring after the game has commenced. Using match information gathered from all 2200 ODI matches played prior to January 2005, a range of variables that could independently explain statistically significant proportions of variation associated with the predicted run totals and match outcomes were created. Such variables include home ground advantage, past performances, match experience, performance at the specific venue, performance against the specific opposition, experience at the specific venue and current form. Using a multiple linear regression model, prediction variables were numerically weighted according to statistical significance and used to predict the match outcome. With the use of the Duckworth-Lewis method to determine resources remaining, at the end of each completed over, the predicted run total of the batting team could be updated to provide a more accurate prediction of the match outcome. By applying this prediction approach to a holdout sample of matches, the efficiency of the "in the run" wagering market could be assessed. Preliminary results suggest that the market is prone to overreact to events occurring throughout the course of the match, thus creating brief inefficiencies in the wagering market

  7. Outsourced pattern matching

    DEFF Research Database (Denmark)

    Faust, Sebastian; Hazay, Carmit; Venturi, Daniele

    2013-01-01

    In secure delegatable computation, computationally weak devices (or clients) wish to outsource their computation and data to an untrusted server in the cloud. While most earlier work considers the general question of how to securely outsource any computation to the cloud server, we focus...... and the client C T in order to learn the positions at which a pattern of length m matches the text (and nothing beyond that). This is called the outsourced pattern matching problem and is highly motivated in the context of delegatable computing since it offers storage alternatives for massive databases...... that contain confidential data (e.g., health related data about patient history). Our constructions offer simulation-based security in the presence of semi-honest and malicious adversaries (in the random oracle model) and limit the communication in the query phase to O(m) bits plus the number of occurrences...

  8. Bayesian grid matching

    DEFF Research Database (Denmark)

    Hartelius, Karsten; Carstensen, Jens Michael

    2003-01-01

    A method for locating distorted grid structures in images is presented. The method is based on the theories of template matching and Bayesian image restoration. The grid is modeled as a deformable template. Prior knowledge of the grid is described through a Markov random field (MRF) model which...... represents the spatial coordinates of the grid nodes. Knowledge of how grid nodes are depicted in the observed image is described through the observation model. The prior consists of a node prior and an arc (edge) prior, both modeled as Gaussian MRFs. The node prior models variations in the positions of grid...... nodes and the arc prior models variations in row and column spacing across the grid. Grid matching is done by placing an initial rough grid over the image and applying an ensemble annealing scheme to maximize the posterior distribution of the grid. The method can be applied to noisy images with missing...

  9. Electromagnetic wave matching device

    International Nuclear Information System (INIS)

    Hirata, Yosuke; Mitsunaka, Yoshika; Hayashi, Ken-ichi; Ito, Yasuyuki.

    1997-01-01

    The present invention provides a matching device capable of increasing an efficiency of combining beams of electromagnetic waves outputted from an output window of a gyrotron which is expected for plasma heating of a thermonuclear reactor and an electromagnetic wave transmission system as high as possible. Namely, an electromagnetic wave matching device reflects beams of electromagnetic waves incident from an inlet by a plurality of phase correction mirrors and combines them to an external transmission system through an exit. In this case, the phase correction mirrors change the phase of the beams of electromagnetic waves incident to the phase correction mirrors by a predetermined amount corresponding to the position of the reflection mirrors. Then, the beams of electromagnetic waves outputted, for example, from a gyrotron can properly be shaped as desired for the intensity and the phase. As a result, combination efficiency with the transmission system can be increased. (I.S.)

  10. Characteristic Evolution and Matching

    Directory of Open Access Journals (Sweden)

    Winicour Jeffrey

    2005-12-01

    Full Text Available I review the development of numerical evolution codes for general relativity based upon the characteristic initial value problem. Progress is traced from the early stage of 1D feasibility studies to 2D axisymmetric codes that accurately simulate the oscillations and gravitational collapse of relativistic stars and to current 3D codes that provide pieces of a binary black hole spacetime. A prime application of characteristic evolution is to compute waveforms via Cauchy-characteristic matching, which is also reviewed.

  11. Growth and morphogenesis of sun and shade plants I. The influence of light intensity

    NARCIS (Netherlands)

    Corre, W.J.

    1983-01-01

    A number of herbacious sun and shade plants were grown at different light levels to investigate their adaptations in morphology and growth to light intensity. All species examined respond to low light intensity strongly, but very much the same. It is concluded that shade tolerance is not based on

  12. The effect of shade on chlorophyll and anthocyanin content of upland red rice

    Science.gov (United States)

    Muhidin; Syam’un, E.; Kaimuddin; Musa, Y.; Sadimantara, G. R.; Usman; Leomo, S.; Rakian, T. C.

    2018-02-01

    Upland red rice (Oryza sativa) is a staple food and contains anthocyanin, which can act as antioxidants, plays an important role both for the plant itself and for human health. Levels of antioxidants in rice can be affected by the availability of light. The results showed that the difference of shade, cultivar, and interaction both significantly affect the content of chlorophyll a, chlorophyll b and total chlorophyll. The results also showed that shade could increase chlorophyll in all cultivars tested. The highest levels of chlorophyll a were present in the moderate shade level (n2), then decreased at the shelter level (n3) and increased again at high levels (n4). While on chlorophyll content b, it appears that shade increased chlorophyll b in all cultivars tested and this increase was linear to the increase of shade. The shade treatment may increase the anthocyanin content and the increase depending on the type of cultivar. Increased levels of anthocyanin highest due to shade occurred on Jangkobembe cultivar. The original level of anthocyanin on Jangkobembe cultivar averaged 0.096 mg g-1 increased to 2.487 mg g-1 or increased 26 fold. It is concluded that the shade had a significant effect on the chlorophyll and anthocyanin content.

  13. Automated analysis of hypocotyl growth dynamics during shade avoidance in Arabidopsis.

    Science.gov (United States)

    Cole, Benjamin; Kay, Steve A; Chory, Joanne

    2011-03-01

    Plants that are adapted to environments where light is abundant are especially sensitive to competition for light from neighboring vegetation. As a result, these plants initiate a series of changes known as the shade avoidance syndrome, during which plants elongate their stems and petioles at the expense of leaf development. Although the developmental outcomes of exposure to prolonged shade are known, the signaling dynamics during the initial exposure of seedlings to shade is less well studied. Here, we report the development of a new software-based tool, called HyDE (Hypocotyl Determining Engine) to measure hypocotyl lengths of time-resolved image stacks of Arabidopsis wild-type and mutant seedlings. We show that Arabidopsis grows rapidly in response to the shade stimulus, with measurable growth after just 45 min shade exposure. Similar to other mustard species, this growth response occurs in multiple distinct phases, including two phases of rapid growth and one phase of slower growth. Using mutants affected in shade avoidance phenotypes, we demonstrate that most of this early growth requires new auxin biosynthesis via the indole-3-pyruvate pathway. When activity of this pathway is reduced, the first phase of elongation growth is absent, and this is correlated with reduced activity of auxin-regulated genes. Finally, we show that varying shade intensity and duration can affect the shape and magnitude of the growth response, indicating a broad range of the elongation response to shade. © 2011 The Authors. The Plant Journal © 2011 Blackwell Publishing Ltd.

  14. Shade factors for 149 taxa of in-leaf urban trees in the USA

    Science.gov (United States)

    E. Gregory McPherson; Qingfu Xiao; Natalie S. van Doorn; Nels Johnson; Shannon Albers; Paula J. Peper

    2018-01-01

    Shade factors, defined as the percentage of sky covered by foliage and branches within the perimeter of individual tree crowns, have been used to model the effects of trees on air pollutant uptake, building energy use and rainfall interception. For the past 30 years the primary source of shade factors was a database containing values from 47 species. In most...

  15. Growth and production of new superior rice varieties in the shade intensity

    Science.gov (United States)

    Alridiwirsah; Harahap, E. M.; Akoeb, E. N.; Hanum, H.

    2018-02-01

    Shade intensity is one of the most important requirements for plant growth, affecting growth, development, survival, and crop productivity. This study aims to evaluate the growth and productiom of New Superior Rice Varieties In The shade Intensity. This study was conducted in Balai Pengkajian Teknologi Pertanian, Pagar Merbau, Deli Serdang, North Sumatra. The research used completely randomized design with twofactors. The shade intensity (N) were 25%, 50% and no shade intensity as a control. Whereas new superior rice varieties were V1: Inpara 2, V2: Suluttan Unsrat 2, V3: Inpari Mugibat, V4: Inpari Sidenuk, V5: Mekongga, V6: Ciherang, V7:Inpari 10, V8: Inpari 3, V9: Inpari 4, V10: Inpari 30, dan V11: Cibogo. The result indicated that new superior rice varietiesshowedsignificant effectonthe growth and productionvariablesuch as leaf area, where Inpari Sidenuk variety was the highest among the varieties. Total chorophyll, the highest was found on Inpari variety. Number of tillers and plant height where the highest was found on Ciherang variety. The shade intensity showed significant effect on leaf area, where 25% shade intensity was the highest. Total chlorophyll, the highest was found on 50% shade intensity, number of tillers, the highest was found on no shade intensity.

  16. The art of being flexible: how to escape from shade, salt, and drought.

    NARCIS (Netherlands)

    Pierik, R.; Testerink, C.

    2014-01-01

    Environmental stresses, such as shading of the shoot, drought, and soil salinity, threaten plant growth, yield, and survival. Plants can alleviate the impact of these stresses through various modes of phenotypic plasticity, such as shade avoidance and halotropism. Here, we review the current state

  17. Growth characteristics and nutrient content of some herbaceous species under shade and fertilization

    Energy Technology Data Exchange (ETDEWEB)

    Koukoura, Z.; Kyriazopoulos, A. P.; Parissi, Z. M.

    2009-07-01

    Herbage production and nutrient content are affected by light interception and soil fertility. The objective of this study was to assess the effects of artificial shade and fertilization on herbage production, growth characteristics, and nutrient content of the grass species Dactylis glomerata and Festuca ovina, and the legume species Trifolium subterraneum and Medicago lupulina. Each plant species was placed under three shading treatments of 90% (heavy shade), 50% (moderate shade) and 0% (control). Fertilization (225 kg ha{sup -}1 N, 450 kg ha{sup -}1 P, and 225 kg ha{sup -}1 K) was applied to half of the pots of every species and shading treatment. Reduced light intensity (90% shading) significantly lowered herbage production from 18% for F. ovina to 48% for D. glomerata and decreased the root:shoot (R/S) ratio of all species but the moderate reduction of light intensity (50%) did not affect R/S ratio and herbage production of the grasses and M. lupulina, while it resulted in an increase of the production of T. subterraneum by 10.5%. Reduced light intensity increased by 25% on average, the crude protein concentration of the grass species while moderate shading did not affect the crude protein concentration of T. subterraneum. Fertilization increased herbage production from 16% for F. ovina to 59% for D. glomerata and ameliorated its nutrient content. Among the tested species, D. glomerata and T. subterraneum demonstrated the highest shade tolerance and could be incorporated into silvopastoral systems of the Mediterranean region. (Author)

  18. The production of Physalis spp. seedlings grown under different-colored shade nets

    Directory of Open Access Journals (Sweden)

    Daniel Fernandes da Silva

    2016-04-01

    Full Text Available The objective of this study was to evaluate the production of seedlings of Physalis L. species under different-colored shade nets. Four shade nets individually stained white, blue, red and black, all with 50% shading, were used in this study, and an additional  treatment (control was used in which seedlings were grown in full sun. The study examined four species of Physalis, namely, P. peruviana, P. pubescens, P. minima and P. ixocarpa. The experiment followed a randomized block design with three blocks and 25 seeds per plot. The species were sown in styrofoam trays. Germination was monitored daily to calculate the Emergency Velocity Index (EVI and stabilize the overall percentage of emergence. Height, stem diameter, number of leaves, leaf area index and dry mass of seedlings were assessed at 50 days after sowing. The study found that these species react differently to changes in the light spectrum. Seedlings of P. peruviana should be grown under a white or red shade net; of P. pubescens under a white or black shade net; of P. minima under a white, red or black shade net; and of P. ixocarpa under a white shade net. For all species, 50% shade should be used.

  19. Shades of Pink: Preschoolers Make Meaning in a Reggio-Inspired Classroom

    Science.gov (United States)

    Kim, Bo Sun

    2012-01-01

    Shades of Pink study describes how six preschoolers and their teacher engaged in a collaborative learning project through which they learned about the shades of a color--in this case, pink. As the children learned through experimenting and discussing their theories, they represented ideas using art as a tool for discovery and learning. The study…

  20. Effects of shade on growth, production and quality of coffee (Coffea arabica) in Ethiopia

    NARCIS (Netherlands)

    Bote, A.D.; Struik, P.C.

    2011-01-01

    The research work was conducted to evaluate the effect of shade on growth and production of coffee plants. To achieve this, growth and productivity of coffee plants growing under shade trees were compared with those of coffee plants growing under direct sun light. Different physiological,

  1. Effects of shading on Vallisneria natans (Lour.) H. Hara growth

    DEFF Research Database (Denmark)

    Fox, Anthony David; Meng, F; Shen, X

    2013-01-01

    , but dry weight fruit production was significantly reduced at 90% shading. We conclude that above 50% surface shading, V. natans plants suffer reductions in accumulated biomass and investment in sexual reproduction. We contend that recent expansions in the extent of the native floating water chestnut Trapa...

  2. Apple tree growth, net photosynthesis, dark respiration, and specific leaf weight as affected by continuous and intermittent shade

    Energy Technology Data Exchange (ETDEWEB)

    Barden, J.A.

    1977-07-01

    The effects of 80% shade from saran cloth and slats were very similar on young Delicious apple (Malus domestica Borkh.) trees. Shoot-length increase was suppressed about 10% by shade but leaf area was unaffected. Dry weight increase for shaded trees was about 50% of that for trees in full sun. Sun leaves required about 43.1 klx for light saturation and shade leaves needed only about 19.4 klx. Net photosynthesis (Pn) of shade leaves was about 70% of that of sun leaves at light saturation. Dark respiration (Rd) rates were also higher in sun- than shade-leaves. Specific leaf weight (SLW) of leaves near full expansion at the start of the experiment increased 15% under shade whereas sun-leaf SLW increased 40% during the experiment. For leaves unfolding under the differential light treatments, SLW of shade leaves averaged only 55% of sun leaves. 4 figures, 3 tables.

  3. A Comprehensive Review and Analysis of Solar Photovoltaic Array Configurations under Partial Shaded Conditions

    Directory of Open Access Journals (Sweden)

    R. Ramaprabha

    2012-01-01

    Full Text Available The aim of this paper is to investigate the effects of partial shading on energy output of different Solar Photovoltaic Array (SPVA configurations and to mitigate the losses faced in Solar Photovoltaic (SPV systems by incorporating bypass diodes. Owing to the practical difficulty of conducting experiments on varied array sizes, a generalized MATLAB M-code has been developed for any required array size, configuration, shading patterns, and number of bypass diodes. The proposed model which also includes the insolation-dependent shunt resistance can provide sufficient degree of precision without increasing the computational effort. All the configurations have been analyzed and comparative study is made for different random shading patterns to determine the configuration less susceptible to power losses under partial shading. Inferences have been drawn by testing several shading scenarios.

  4. Effects of shading on morphology, physiology and grain yield of winter wheat

    DEFF Research Database (Denmark)

    Li, Huawei; Jiang, Dong; Wollenweber, Bernd

    2010-01-01

    the flag leaf, as in most cases Pn of the third and the penultimate leaves were found to increase under shading treatments. Shading increased the redistribution of dry matter from vegetative organs into grains. The responses of the morphological and physiological traits to shading are discussed in relation...... the shading treatments applied, leaf area index, length of the peduncle internode, area of the upper leaves and content of pigments increased, which favoured efficient light capture. Shading modified light quality in the canopy as indicated by increases of diffuse- and blue light fractions and a reduction...... with no significant change in the maximum photochemical efficiency of photosystem II under dark-adapted conditions (Fv/Fm). By contrast, photosynthetic carbon-use (Pn) in the flag leaf of both cultivars was reduced in the S3 treatment only. The lower leaves were found to be more tolerant to low radiation than...

  5. GROWTH OF Mimosa caesalpiniifolia Benth., UNDER SHADE IN THE NORTHEAST SEMI-ARID REGION OF BRAZIL

    Directory of Open Access Journals (Sweden)

    JOSÉ RIVANILDO DE SOUZA PINTO

    2016-01-01

    Full Text Available Seedling production for reforestation aims to achieve the best plant growth in a minimal amount of time, to provide good survival and growth levels after transplantation. During cultivation, it is necessary to know the shading levels that lead to the best growth. The objective of this study was to assess the growth of young Mimosa caesalpiniifolia Benth. plants provided with various amounts of shade in the northeast semi-arid region of Brazil. Four types of shade cloth were tested (0, 30, 50 and 70%. Shoot length, stem diameter, stem dry matter, leaf dry matter, total dry matter and leaf area were assessed. Leaf area ratio, specific leaf area, absolute growth rate, relative growth rate and net assimilation rate were also calculated. The different shading levels affected M. caesalpinifolia growth, with the best growth indicators observed in plants grown under 50% shade, with increases in plant height, leaf area and total dry matter observed compared to the full sun condition.

  6. Do people match surface reflectance fundamentally differently than they match emitted light?

    NARCIS (Netherlands)

    Granzier, J.J.M.; Brenner, E.; Smeets, J.B.J.

    2009-01-01

    We compared matches between colours that were both presented on a computer monitor or both as pieces of paper, with matching the colour of a piece of paper with a colour presented on a computer monitor and vice versa. Performance was specifically poor when setting an image on a computer monitor to

  7. Shaded Relief Image of Saint Pierre and Miquelon

    Science.gov (United States)

    2000-01-01

    This image shows two islands, Miquelon and Saint Pierre, located south of Newfoundland, Canada. These islands, along with five smaller islands, are a self-governing territory of France. A thin barrier beach divides Miquelon, with Grande Miquelon to the north and Petite Miquelonto the south. Saint Pierre Island is located to the lower right. With the islandsi location in the north Atlantic Ocean and their deep water ports, fishing is the major part of the economy. The maximum elevation of the island is 240 meters (787 feet). The land mass of the islands is about 242 square kilometers, or 1.5 times the size of Washington DC.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.This image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASAis Jet Propulsion Laboratory

  8. World in Mercator Projection, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    This image of the world was generated with data from the Shuttle Radar Topography Mission (SRTM). The SRTM Project has recently released a new global data set called SRTM30, where the original one arcsecond of latitude and longitude resolution (about 30 meters, or 98 feet, at the equator) was reduced to 30 arcseconds (about 928 meters, or 1496 feet.) This image was created from that data set and shows the world between 60 degrees south and 60 degrees north latitude, covering 80% of the Earth's land mass. The image is in the Mercator Projection commonly used for maps of the world.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise,Washington, D.C.Orientation: North toward the top, Mercator projection Image Data: shaded and colored SRTM

  9. Shaded Relief with Color as Height, California Mosaic

    Science.gov (United States)

    2002-01-01

    The diversity of landforms that make up the state of California is evident in this new rendition of the 3-D topography of the state. The Central Valley, flanked on the east by the Sierra Nevada, dominates the scene with San Francisco and Monterey Bays clearly visible at left center. Other features of interest include Lake Tahoe at the edge to the right of San Francisco, Mono Lake below Lake Tahoe, and the Salton Sea at the lower right. The prominent sideways 'V' in the southern part of the state is the intersection of the Garlock and San Andreas Faults - to the east is the Mojave Desert. Offshore are the Channel Islands and to the right of them lies the city of Los Angeles.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction. North-facing slopes appear bright and south-facing slopes appear dark. Color coding is directly related to topographic height, with blue and green at the lower elevations, rising through yellow and brown to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar(SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science

  10. Alpine Fault, New Zealand, SRTM Shaded Relief and Colored Height

    Science.gov (United States)

    2005-01-01

    The Alpine fault runs parallel to, and just inland of, much of the west coast of New Zealand's South Island. This view was created from the near-global digital elevation model produced by the Shuttle Radar Topography Mission (SRTM) and is almost 500 kilometers (just over 300 miles) wide. Northwest is toward the top. The fault is extremely distinct in the topographic pattern, nearly slicing this scene in half lengthwise. In a regional context, the Alpine fault is part of a system of faults that connects a west dipping subduction zone to the northeast with an east dipping subduction zone to the southwest, both of which occur along the juncture of the Indo-Australian and Pacific tectonic plates. Thus, the fault itself constitutes the major surface manifestation of the plate boundary here. Offsets of streams and ridges evident in the field, and in this view of SRTM data, indicate right-lateral fault motion. But convergence also occurs across the fault, and this causes the continued uplift of the Southern Alps, New Zealand's largest mountain range, along the southeast side of the fault. Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast (image top to bottom) direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data

  11. Shaded Relief with Color as Height, St. Louis, Missouri

    Science.gov (United States)

    2002-01-01

    The confluence of the Mississippi, Missouri and Illinois rivers are shown in this view of the St. Louis area from the Shuttle Radar Topography Mission. The Mississippi flows from the upper left of the image and first meets the Illinois, flowing southward from the top right. It then joins the Missouri, flowing from the west across the center of the picture. The rivers themselves appear black here, and one can clearly see the green-colored floodplains in which they are contained. These floodplains are at particular risk during times of flooding. The Mississippi forms the state boundary between Illinois (to the right) and Missouri (to the left), with the city of St. Louis located on the Mississippi just below the point where it meets the Missouri. This location at the hub of the major American waterways helped establish St. Louis' reputation as the 'Gateway to the West.'Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction. North-facing slopes appear bright and south-facing slopes appear dark. Color coding is directly related to topographic height, with blue and green at the lower elevations, rising through yellow and brown to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar(SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping

  12. Shenandoah National Park, Virginia, Shaded Relief with Height as Color

    Science.gov (United States)

    2003-01-01

    Shenandoah National Park lies astride part of the Blue Ridge Mountains, which form the southeastern range of the greater Appalachian Mountains in Virginia. The park is well framed by this one-degree of latitude (38-39 north) by one-degree of longitude (78-79 west) cell of Shuttle Radar Topography Mission data, and it appears here as the most prominent ridge trending diagonally across the scene. Skyline Drive, a 169-kilometer (105-mile) road that winds along the crest of the mountains through the length the park, provides vistas of the surrounding landscape. The Shenandoah River flows through the valley to the west, with Massanutten Mountain standing between the river's north and south forks. Unusually pronounced meanders of both river forks are very evident near the top center of this scene. Massanutten Mountain itself is an unusually distinctive landform also, consisting of highly elongated looping folds of sedimentary rock. The rolling Piedmont country lies to the southeast of the park, with Charlottesville located at the bottom center of the scene.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to bluish-white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60

  13. SRTM Colored Height and Shaded Relief: Lava plateaus in Argentina

    Science.gov (United States)

    2001-01-01

    All of the major landforms relate to volcanism and/or erosion in this Shuttle Radar Topography Mission scene of Patagonia, near La Esperanza, Argentina. The two prominent plateaus once formed a continuous surface that extended over much of this region. Younger volcanoes have grown through and atop the plateau, and one just south of this scene has sent a long, narrow flow down a stream channel (lower left). The topographic pattern shows that streams dominate the erosion processes in this arid environment even though wind is known to move substantial amounts of sediment here.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark, as would be the case at noon at this latitude in the southern hemisphere. Color-coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC.Size: 62.4 by 88.8 kilometers

  14. Mts. Agung and Batur, Bali, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    This perspective view shows the major volcanic group of Bali, one 13,000 islands comprising the nation of Indonesia. The conical mountain to the left is Gunung Agung, at 3,148 meters (10,308 feet) the highest point on Bali and an object of great significance in Balinese religion and culture. Agung underwent a major eruption in 1963 after more than 100 years of dormancy, resulting in the loss of over 1,000 lives.In the center is the complex structure of Batur volcano, showing a caldera (volcanic crater) left over from a massive catastrophic eruption about 30,000 years ago. Judging from the total volume of the outer crater and the volcano, that once lay above it, approximately 140 cubic kilometers(33.4 cubic miles) of material must have been produced by this eruption, making it one of the largest known volcanic events on Earth. Batur is still active and has erupted at least 22 times since the 1800's.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National

  15. SRTM Colored Height and Shaded Relief: Near Zapala, Argentina

    Science.gov (United States)

    2001-01-01

    Topographic data provided by the Shuttle Radar Topography Mission can provide many clues to geologic history and processes. This view of an area southwest of Zapala, Argentina, shows a wide diversity of geologic features. The highest peaks (left) appear to be massive (un-layered)crystalline rocks, perhaps granites. To their right (eastward) are tilted and eroded layered rocks, perhaps old lava flows, forming prominent ridges. Farther east and south, more subtle and curvilinear ridges show that the rock layers have not only been tilted but also folded. At the upper right, plateaus that cap the underlying geologic complexities are more recent lava flows - younger than the folding, but older than the current erosional pattern. Landforms in the southeast (lower right) and south-central areas appear partially wind sculpted.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark, as would be the case at noon at this latitude in the southern hemisphere. Color-coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard Space Shuttle Endeavour, launched on February 11,2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on Space Shuttle Endeavour in 1994. Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National

  16. SRTM Colored Height and Shaded Relief: Las Bayas, Argentina

    Science.gov (United States)

    2001-01-01

    The interplay of volcanism, stream erosion and landslides is evident in this Shuttle Radar Topography Mission view of the eastern flank of the Andes Mountains, southeast of San Carlos de Bariloche, Argentina. Older lava flows emanating from the Andes once covered much of this area. Younger, local volcanoes (seen here as small peaks) then covered parts of the area with fresh, erosion resistant flows (seen here as very smooth surfaces). Subsequent erosion has created fine patterns on the older surfaces (bottom of the image) and bolder, irregular patterns through and around the younger surfaces (upper center and right center). Meanwhile, where a large stream immediately borders the resistant plateau (center of the image), lateral erosion has undercut the resistant plateau causing slivers of it to fall into the stream channel. This scene well illustrate show topographic data alone can reveal some aspects of recent geologic history.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark, as would be the case at noon at this latitude in the southern hemisphere. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and

  17. Photosynthetic responses to understory shade and elevated carbon dioxide concentration in 4 northern hardwood tree species

    International Nuclear Information System (INIS)

    Sefcik, L.T.; Zak, D.R.; Ellsworth, D.S.

    2006-01-01

    Stimulation of photosynthesis in response to elevated carbon dioxide (CO 2 ) varies among tree species and species groups. In this study, seedling responses to elevated atmospheric carbon dioxide (CO 2 ) concentrations and solar irradiance over 2 growing seasons were investigated for shade tolerant Acer saccharum Marsh.; Fagus grandifolia J.F. Ehrh; and shade-intolerant Prunus serotina. Seedlings were exposed to a combination of elevated and ambient concentrations of CO 2 and understory shade in open-top chambers placed in a forest understory. It was observed that the elevated CO 2 treatment increased mean light-saturated net photosynthetic rates by 63 per cent in the shade-tolerant species and 67 per cent in the shade-intolerant species. When measured at the elevated CO 2 , long-term enhancement of photosynthesis was 10 per cent lower than the instantaneous enhancement observed in ambient-CO 2 -grown plants. As the growth irradiance increased, proportional enhancement due to elevated CO 2 decreased from 97 per cent for plants grown in deep shade to 47 per cent for plants grown in moderate shade. Results indicated that in nitrogen (N) limited northern temperate forests, trees grown in deep shade may display greater photosynthetic gains from a CO 2 enriched atmosphere than trees growing in more moderate shade, due to greater down-regulation. It was concluded that if elevated CO 2 levels promote the survival of shade-intolerant species in dim understory light, the future composition and dynamics of successional forest communities may be altered. 70 refs., 2 tabs., 3 figs

  18. Comparison of photographic and conventional methods for tooth shade selection: A clinical evaluation.

    Science.gov (United States)

    Miyajiwala, Juzer S; Kheur, Mohit G; Patankar, Anuya H; Lakha, Tabrez A

    2017-01-01

    This study aimed to compare three different methods used for shade selection, i.e., visual method, spectrophotometer, and digital photography method. Fifty participants were selected from the Out Patient Department of Prosthodontics. Presence of the maxillary right central incisor with no history of any restorative or endodontic procedures was the primary inclusion criterion. The shade of the right maxillary central incisor was determined using all the three shade selection procedures, namely, visual, spectrophotometric, and digital photography method for all the selected participants. The shades obtained in the visual method using a shade guide were noted down for further comparisons. The spectrophotometer reported the L*, a*, and b* values along with the actual shade whereas the digital photography method reported only the L*, a*, and b* values. The agreement between the readings obtained by the three different methods was compared and subjected to appropriate statistical analysis. The results showed that when the three methods studied were compared, there was a statistically significant proportion of agreement between spectrophotometric and visual method ( P < 0.01) with higher proportion of "yes" (agreement) and between the spectrophotometric and digital photography method ( P < 0.01) with higher proportion of "yes" (agreement). Coefficient of agreement (using Kappa coefficient) between spectrophotometric and visual shades revealed a fair agreement. The mean ΔE was 1.69. There was a statistically significant difference between the proportion of ΔE more than and <2, between spectrophotometric and digital photography methods ( P < 0.01) with higher proportion of <2 ΔE. Furthermore, percentage of agreement between shades obtained by the visual and spectrophotometric method showed maximum agreement with A1 shade. It was concluded that the digital photography method emerged as a reliable method for shade selection in a clinical setup.

  19. Shading decreases the abundance of the herbivorous California horn snail, Cerithidea californica

    Science.gov (United States)

    Lorda, Julio; Lafferty, Kevin D.

    2012-01-01

    Most of the intertidal zone in estuaries of California, USA and Baja California, Mexico is covered with vascular vegetation. Shading by these vascular plants influences abiotic and biotic processes that shape benthic community assemblages. We present data on the effects of shading on the California horn snail, Cerithidea californica. This species is important because it is the most common benthic macrofaunal species in these systems and acts as an obligate intermediate host of several species of rematode parasites that infect several other species. Using observational and experimental studies, we found a negative effect of shade on the distribution and abundance of the California horn snail. We hypothesized that shading reduces the abundance of the epipelic diatoms that the snails feeds on, causing snails to leave haded areas. We observed a negative relationship between vascular plant cover, sub-canopy light levels, and snail density in Mugu Lagoon. Then we experimentally manipulated light regimes, by clipping vegetation and adding shade structures, and found higher snail densities at higher light levels. In Goleta Slough, we isolated the effect of shade from vegetation by documenting a negative relationship between the shade created by two bridges and diatom and snail densities. We also found that snails moved the greatest distances over shaded channel banks compared to unshaded channel banks. Further, we documented the effect of water depth and channel bank orientation on shading in this system. An additional effect of shading is the reduction of temperature, providing an alternative explanation for some of our results. These results broaden our knowledge of how variation in the light environment influences the ecology of estuarine ecosystems.

  20. Single color attribute index for shade conformity judgment of dental resin composites

    Directory of Open Access Journals (Sweden)

    Yong-Keun Lee

    2015-01-01

    Full Text Available Introduction: Commercial dental resin composites under the same shade designations show color discrepancies by brand. Moreover, three Commission Internationale de l′Eclairage (CIE color coordinates show significant variations by measurement method; therefore, direct comparisons of the color coordinates based on different methods are meaningless. This study aimed to assess a hypothesis that a new color attribute index (CAI, which could reduce the color coordinate variations by measurement method, was applicable for the shade conformity judgment of dental resin composites. The Hypothesis: CAI is applicable in the shade conformity judgment of commercial dental resin composites. Using the CIE color coordinates of shade guide tabs and resin composites, combined color indices such as Wa = CIE aFNx01 × DEFNx01 ab /C ab FNx01 and Wb = CIE bFNx01 × DEFNx01 ab /C ab FNx01 were defined, in which DEFNx01 ab was the color difference with a standard white tile. Ratio of Wa/Wb to that of an arbitrary reference shade (A2 in the same brand and measurement was defined as the CAI. The CAI values were significantly different by the shade designation and showed a logical trend by the shade designation number. The CAI of commercial resin composites and the keyed shade guide tabs showed overlaps. Evaluation of the Hypothesis: The CAI might be used to judge the shade conformity of resin composites using the values based on different measurement methods. The application of the CAI, instead of conventional three-color coordinates, could efficiently simplify the shade conformity judgment of commercial resin composites. Although the hypothesis of the present study was partially confirmed, further studies for the practical application of this index are highly recommended.

  1. INFORMATION SYSTEMS AUDIT CURRICULA CONTENT MATCHING

    OpenAIRE

    Vasile-Daniel CARDOȘ; Ildikó Réka CARDOȘ

    2014-01-01

    Financial and internal auditors must cope with the challenge of performing their mission in technology enhanced environment. In this article we match the information technology description found in the International Federation of Accountants (IFAC) and the Institute of Internal Auditors (IIA) curricula against the Model Curriculum issued by the Information Systems Audit and Control Association (ISACA). By reviewing these three curricula, we matched the content in the ISACA Model Curriculum wi...

  2. Subtle variation in shade avoidance responses may have profound consequences for plant competitiveness.

    Science.gov (United States)

    Bongers, Franca J; Pierik, Ronald; Anten, Niels P R; Evers, Jochem B

    2017-12-21

    Although phenotypic plasticity has been shown to be beneficial for plant competitiveness for light, there is limited knowledge on how variation in these plastic responses plays a role in determining competitiveness. A combination of detailed plant experiments and functional-structural plant (FSP) modelling was used that captures the complex dynamic feedback between the changing plant phenotype and the within-canopy light environment in time and 3-D space. Leaf angle increase (hyponasty) and changes in petiole elongation rates in response to changes in the ratio between red and far-red light, two important shade avoidance responses in Arabidopsis thaliana growing in dense population stands, were chosen as a case study for plant plasticity. Measuring and implementing these responses into an FSP model allowed simulation of plant phenotype as an emergent property of the underlying growth and response mechanisms. Both the experimental and model results showed that substantial differences in competitiveness may arise between genotypes with only marginally different hyponasty or petiole elongation responses, due to the amplification of plant growth differences by small changes in plant phenotype. In addition, this study illustrated that strong competitive responses do not necessarily have to result in a tragedy of the commons; success in competition at the expense of community performance. Together, these findings indicate that selection pressure could probably have played a role in fine-tuning the sensitive shade avoidance responses found in plants. The model approach presented here provides a novel tool to analyse further how natural selection could have acted on the evolution of plastic responses.

  3. The vegetative development of Sinningia leucotricha Hoehne (Moore under different levels of shading

    Directory of Open Access Journals (Sweden)

    Lilian Keiko Unemoto

    2010-02-01

    Full Text Available This work aimed at the assessment of the influence of different levels of shading in the development of (Sinningia leucotricha Hoehne (Moore. Tuberous roots of 2.3 ± 0.3 cm in diameter were used as vegetative material. The cultivation was performed in plastic vases and gross sand as substrate, and conditioned in sheltered nurseries protected by black polypropylene nets in the followings percentages: 0% (under full sunlight, 50, 60, and 70%. Sheltered nurseries with 60 or 70% of shading presented the highest vegetative development for Brazilian edelweiss. The cultivation of this species under full sunlight is not recommended.A rainha-do-abismo (Sinningia leucotricha Hoehne (Moore é uma planta nativa do Estado do Paraná, se destaca pela beleza de suas folhas de aspecto prateado. Este trabalho teve como objetivo avaliar a influência de diferentes níveis de sombreamento no desenvolvimento de plantas de rainha-do-abismo. Para o experimento foram utilizadas como material vegetativo raízes tuberosas com 2,3 ± 0,3 cm de diâmetro. O cultivo foi realizado em vasos plásticos e areia grossa como substrato, que foram acondicionados em viveiros protegidos com tela de polipropileno de coloração preta, nas seguintes porcentagens: 0% (a pleno sol 50%, 60% e 70%. Viveiros protegidos com 60% ou 70% de sombreamento foram os que proporcionaram maior desenvolvimento vegetativo de rainha-do-abismo. O cultivo desta espécie a pleno sol não é recomendado.

  4. Assessment of the influence of gender and skin color on the preference of tooth shade in Saudi population

    Directory of Open Access Journals (Sweden)

    Nawaf Labban

    2017-07-01

    Conclusion: Gender and skin color influences the perception of teeth shades among general population. Therefore, lighter tooth shades (BL1, BL2 for lighter skin color and comparatively darker tooth shades (BL4, B1, A1 for darker skin individuals should be prescribed as these are perceived as natural among Saudi population.

  5. Mt. Elgon, Africa, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    The striking contrast of geologic structures in Africa is shown in this shaded relief image of Mt. Elgon on the left and a section of the Great Rift Valley on the right. Mt. Elgon is a solitary extinct volcano straddling the border between Uganda and Kenya, and at 4,321 meters (14,178 feet) tall is the eighth highest mountain in Africa. It is positioned on the Pre-Cambriam bedrock of the Trans Nzoia Plateau, and is similar to other such volcanoes in East Africa in that it is associated with the formation of the Rift Valley. However one thing that sets Mt. Elgon apart is its age. Although there is no verifiable evidence of its earliest volcanic activity, Mt. Elgon is estimated to be at least 24 million years old, making it the oldest extinct volcano in East Africa. This presents a striking comparison to Mt. Kilimanjaro, the highest mountain in Africa at 5,895 meters (19,341 feet), which is just over one million years old. Judging by the diameter of its base, it is a common belief among geological experts that Mt. Elgon was once the highest mountains in Africa, however erosion has played a significant role in reducing the height to its present value. Juxtaposed with this impressive mountain is a section of the Great Rift Valley, a geological fault system that extends for about 4,830 kilometers (2,995 miles) from Syria to central Mozambique. Erosion has concealed some sections, but in some sections like that shown here, there are sheer cliffs several thousand feet high. The present configuration of the valley, which dates from the mid-Pleistocene epoch, results from a rifting process associated with thermal currents in the Earth's mantle. Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height

  6. Shaded Relief with Height as Color, Yucatan Peninsula, Mexico

    Science.gov (United States)

    2003-01-01

    This shaded relief image of Mexico's Yucatan Peninsula show a subtle, but unmistakable, indication of the Chicxulub impact crater. Most scientists now agree that this impact was the cause of the Cretatious-Tertiary Extinction, the event 65 million years ago that marked the sudden extinction of the dinosaurs as well as the majority of life then on Earth.Most of the peninsula is visible here, along with the island of Cozumel off the east coast. The Yucatan is a plateau composed mostly of limestone and is an area of very low relief with elevations varying by less than a few hundred meters (about 500 feet.) In this computer-enhanced image the topography has been greatly exaggerated to highlight a semicircular trough, the darker green arcing line at the upper left corner of the peninsula. This trough is only about 3 to 5 meters (10 to 15 feet) deep and is about 5 km. wide (3 miles), so subtle that if you walked across it you probably would not notice it, and is a surface expression of the crater's outer boundary. Scientists believe the impact, which was centered just off the coast in the Caribbean, altered the subsurface rocks such that the overlying limestone sediments, which formed later and erode very easily, would preferentially erode on the vicinity of the crater rim. This formed the trough as well as numerous sinkholes (called cenotes) which are visible as small circular depressions.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwestern slopes appear bright and southeastern slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.For a smaller, annotated version of this image, please select Figure 1, below: [figure removed for brevity, see original site] (Large image: 1.5 m

  7. Critical analysis about solutions and models of solar shades in non-residential buildings from tropical regions.

    Science.gov (United States)

    Castañon, J A B; Caldeira, L F D; Gervásio, M F; Brum, F M

    2012-01-01

    Whereas the non-residential buildings consume a significant percentage of the total energy produced by the city, is important that these buildings have for such consumption is reduced or consumed in a conscious way. To do so, using concepts of energy efficiency, this work is to explain passive strategies with the use of flexible solar shades that help to get a favorable outcome with respect to the performance of the building right in the initial stages of planning and design. Once initial gains can be obtained and the architecture constants that value at the same time provide better working conditions and indoor comfort.

  8. Herbivory on temperate rainforest seedlings in sun and shade: resistance, tolerance and habitat distribution.

    Directory of Open Access Journals (Sweden)

    Cristian Salgado-Luarte

    Full Text Available Differential herbivory and/or differential plant resistance or tolerance in sun and shade environments may influence plant distribution along the light gradient. Embothrium coccineum is one of the few light-demanding tree species in the temperate rainforest of southern South America, and seedlings are frequently attacked by insects and snails. Herbivory may contribute to the exclusion of E. coccineum from the shade if 1 herbivory pressure is greater in the shade, which in turn can result from shade plants being less resistant or from habitat preferences of herbivores, and/or 2 consequences of damage are more detrimental in the shade, i.e., shade plants are less tolerant. We tested this in a field study with naturally established seedlings in treefall gaps (sun and forest understory (shade in a temperate rainforest of southern Chile. Seedlings growing in the sun sustained nearly 40% more herbivore damage and displayed half of the specific leaf area than those growing in the shade. A palatability test showed that a generalist snail consumed ten times more leaf area when fed on shade leaves compared to sun leaves, i.e., plant resistance was greater in sun-grown seedlings. Herbivore abundance (total biomass was two-fold greater in treefall gaps compared to the forest understory. Undamaged seedlings survived better and showed a slightly higher growth rate in the sun. Whereas simulated herbivory in the shade decreased seedling survival and growth by 34% and 19%, respectively, damaged and undamaged seedlings showed similar survival and growth in the sun. Leaf tissue lost to herbivores in the shade appears to be too expensive to replace under the limiting light conditions of forest understory. Following evaluations of herbivore abundance and plant resistance and tolerance in contrasting light environments, we have shown how herbivory on a light-demanding tree species may contribute to its exclusion from shade sites. Thus, in the shaded forest understory

  9. Shaded Spacecraft Radiators to Be Used on the Daytime Surface of the Mercury Planet, the Moon, and Asteroids of the Solar System Inner Part

    Directory of Open Access Journals (Sweden)

    V. A. Igrickii

    2016-01-01

    Full Text Available During the daytime a surface of the Moon, Mercury planet, and asteroids of the Solar system inner part, significantly heats up, and infrared radiation of the local soil becomes essential. At the same time direct solar radiation and reflected from the surface solar radiation reach the maximum too. These radiation fluxes can significantly decrease the efficiency of spacecraft radiators in the daytime. This effect is especially strong on the Mercury surface where direct solar radiation is 10 times stronger than solar radiation near the Earth. As a result, on the daytime surface of the Mercury the conventional low-temperature radiators become completely disabled.The article describes the development of the special shaded spacecraft radiators to be used in daytime on the Mercury and other atmosphereless bodies of the Solar system inner part. To solve this task are used mirror shades. The shape of these shades is developed to improve operation conditions of the spacecraft radiator through the appropriate scheme of radiation reflection. The task is discussed in 2D and 3D cases. A new design of shaded spacecraft radiators is proposed, and reasonable proportions of radiators are determined. The performance capability of proposed radiators for environments of the Mercury and the Moon is estimated using the zonal method in view of partial mirror reflection. The calculations showed that the developed shaded spacecraft radiators are capable to work on the Mercury surface as the low-temperature radiators even during the daytime. New radiators provide minimum accepted operating temperature of 241К (-32°С, meanwhile radiators of common design have minimum operating temperature of 479К (206°С. Using such radiators on the Moon enables us to increase effectiveness of spacecraft radiators and to decrease their minimum operating temperature from 270К (-3°С to 137К (-136°С.

  10. Plasma focus matching conditions

    International Nuclear Information System (INIS)

    Soliman, H.M.; Masoud, M.M.; Elkhalafawy, T.A.

    1988-01-01

    A snow-plough and slug models have been used to obtain the optimum matching conditions of the plasma in the focus. The dimensions of the plasma focus device are, inner electrode radius = 2 cm, outer electrode radius = 5.5 cm, and its length = 8 cm. It was found that the maximum magnetic energy of 12.26 kJ has to be delivered to plasma focus whose density is 10 19 /cm 3 at focusing time of 2.55 μs and with total external inductance of 24.2 n H. The same method is used to evaluate the optimum matching conditions for the previous coaxial discharge system which had inner electrode radius = 1.6 cm, outer electrode radius = 3.3 cm and its length = 31.5 cm. These conditions are charging voltage = 12 kV, capacity of the condenser bank = 430 μf, plasma focus density = 10 19 /cm 3 focusing time = 8 μs and total external inductance = 60.32 n H.3 fig., 2 tab

  11. Matching profiles of masked perpetrators: a pilot study

    DEFF Research Database (Denmark)

    Lynnerup, Niels; Bojesen, Sophie; Kuhlman, Michael Bilde

    2010-01-01

    Seventeen male volunteers were photographed laterally with and without a tight-fitting balaclava. We then matched these photographs in blind trials. The matches were performed in two separate trials: as side-by-side comparisons, and by using superimposition. In both trials we graded the matches a...

  12. Impact of postdilatation on performance of bioresorbable vascular scaffolds in patients with acute coronary syndrome compared with everolimus-eluting stents: A propensity score-matched analysis from a multicenter "real-world" registry.

    Science.gov (United States)

    Imori, Yoichi; D'Ascenzo, Fabrizio; Gori, Tommaso; Münzel, Thomas; Fabrizio, Ugo; Campo, Gianluca; Cerrato, Enrico; Napp, L Christian; Iannaccone, Mario; Ghadri, Jelena R; Kazemian, Elycia; Binder, Ronald K; Jaguszewski, Milosz; Csordas, Adam; Capasso, Piera; Biscaglia, Simone; Conrotto, Fedrico; Varbella, Ferdinando; Garbo, Roberto; Gaita, Fiorenzo; Erne, Paul; Lüscher, Thomas F; Moretti, Claudio; Frangieh, Antonio H; Templin, Christian

    2016-01-01

    Safety and efficacy of bioresorbable vascular scaffolds (BRS) and the role of postdilatation on outcome in acute coronary syndrome (ACS) patients compared with those of everolimus-eluting stents (EES) remain unknown. The aim of the study is to compare the safety and efficacy of BRS with EES in ACS and to investigate the role of BRS postdilatation. Consecutive ACS patients undergoing BRS implantation in 8 centers were com-pared with those with EES before and after propensity score matching. Major adverse cardiac event (MACE), myocardial infarction, and target lesion revascularization (TLR) were the primary endpoint. Sensitivity analysis was performed according to postdilatation after BRS implantation. We enrolled 303 BRS and 748 EES patients; 215 from each group were com-pared after matching, and 117 (55.2%) BRS patients were treated with postdilatation. After a median follow-up of 24.0 months, MACE rates were higher in BRS patients than in EES patients (9.3% vs. 4.7%, p Stent thrombosis increased in the BRS group (2.8% vs. 0.9%, p = 0.01). How-ever, after sensitivity analysis, MACE rates in BRS patients with postdilatation were signifi-cantly lower than in those without, comparable to EES patients (6.0% vs. 12.6% vs. 4.7%, p Stent thrombosis rates were higher in both the BRS groups than in EES patients (2.6% vs. 3.2% vs. 0.9%, p = 0.045). Postdilatation appears effective when using BRS in ACS patients. MACE rates are comparable to those of EES, although scaffold thrombosis is not negligible. Randomized prospective studies are required for further investigation.

  13. Job Searchers, Job Matches and the Elasticity of Matching

    NARCIS (Netherlands)

    Broersma, L.; van Ours, J.C.

    1998-01-01

    This paper stresses the importance of a specification of the matching function in which the measure of job matches corresponds to the measure of job searchers. In many empirical studies on the matching function this requirement has not been fulfilled because it is difficult to find information about

  14. Wellington Playgrounds Uncovered: An Examination of Solar Ultraviolet Radiation and Shade Protection in New Zealand.

    Science.gov (United States)

    Gage, Ryan; O'Toole, Chris; Robinson, Andrew; Reeder, Anthony; Signal, Louise; Mackay, Christina

    2018-03-01

    Providing effective shade in summer recreation spaces can reduce children's risk of skin cancer. This study explored the quantity and protective quality of shade in Wellington, New Zealand playgrounds. Two researchers visited 50 randomly selected playgrounds during peak ultraviolet radiation (UVR) hours in summer and recorded the mean shade cover of playground equipment, seats, tables and open areas. A solar meter was used to calculate the proportion of UVR blocked by each built structure and tree. The results found that 95% of playground equipment and 64% of sitting and eating areas had no shade protection. Trees blocked a mean of 80.1% (95% CI: 66.0-94.1) of direct solar UVR, but mostly covered open areas, not playground equipment, seats and tables. The findings demonstrate that Wellington playgrounds have insufficient shade available. Increased shade in Wellington playgrounds is urgently needed to protect children from harmful UVR exposure, particularly through planting trees with heavy foliage and building structures with large, protective roofing. This may well be the case for other regions of NZ and for other countries where UVR exposure is dangerous. The method used in this study provides a reliable means to evaluate shade. © 2017 The American Society of Photobiology.

  15. Response of Artemisia annua L. to shade and manure fertilizer application in lowland altitude

    Science.gov (United States)

    Permana, H. H.; Widyastuti, Y.; Samanhudi; Yunus, A.

    2018-03-01

    Artemisia is a plant producing artemisinin substance which is the main compound in the treatment of malaria. Artemisia comes from China, usually grows wild in native habitats in the plains with an altitude of 1,000-1,500 meters above the sea level. Artemisia development efforts in Indonesia hampered by limited land with the required altitude due to their competition with vegetable crops. Based on this reason, this research is conducted to observe the growth of artemisia planted in lowland with the help of shade and manure. This study aims to determine the level of shade and best manure on the growth of Artemisia. Research conducted at the Laboratory of the Faculty of Agriculture UNS Jumantono using nested design with two factors, shade as main factor and manure fertilizer as sub factor. The data analysis used F test with confidence level of 5%, if significant, then continued with DMRT (Duncan Multiple Range Test). The results showed the treatment of shade gave no difference in growth within 50% shade, 75% shade as well as without shade treatment. Goat manure fertilizer gave the highest result and able to increase plant height, number of branches, flower weight and root volume.

  16. An appraisal of the classic forest succession paradigm with the shade tolerance index.

    Science.gov (United States)

    Lienard, Jean; Florescu, Ionut; Strigul, Nikolay

    2015-01-01

    In this paper we revisit the classic theory of forest succession that relates shade tolerance and species replacement and assess its validity to understand patch-mosaic patterns of forested ecosystems of the USA. We introduce a macroscopic parameter called the "shade tolerance index" and compare it to the classic continuum index in southern Wisconsin forests. We exemplify shade tolerance driven succession in White Pine-Eastern Hemlock forests using computer simulations and analyzing approximated chronosequence data from the USDA FIA forest inventory. We describe this parameter across the last 50 years in the ecoregions of mainland USA, and demonstrate that it does not correlate with the usual macroscopic characteristics of stand age, biomass, basal area, and biodiversity measures. We characterize the dynamics of shade tolerance index using transition matrices and delimit geographical areas based on the relevance of shade tolerance to explain forest succession. We conclude that shade tolerance driven succession is linked to climatic variables and can be considered as a primary driving factor of forest dynamics mostly in central-north and northeastern areas in the USA. Overall, the shade tolerance index constitutes a new quantitative approach that can be used to understand and predict succession of forested ecosystems and biogeographic patterns.

  17. An appraisal of the classic forest succession paradigm with the shade tolerance index.

    Directory of Open Access Journals (Sweden)

    Jean Lienard

    Full Text Available In this paper we revisit the classic theory of forest succession that relates shade tolerance and species replacement and assess its validity to understand patch-mosaic patterns of forested ecosystems of the USA. We introduce a macroscopic parameter called the "shade tolerance index" and compare it to the classic continuum index in southern Wisconsin forests. We exemplify shade tolerance driven succession in White Pine-Eastern Hemlock forests using computer simulations and analyzing approximated chronosequence data from the USDA FIA forest inventory. We describe this parameter across the last 50 years in the ecoregions of mainland USA, and demonstrate that it does not correlate with the usual macroscopic characteristics of stand age, biomass, basal area, and biodiversity measures. We characterize the dynamics of shade tolerance index using transition matrices and delimit geographical areas based on the relevance of shade tolerance to explain forest succession. We conclude that shade tolerance driven succession is linked to climatic variables and can be considered as a primary driving factor of forest dynamics mostly in central-north and northeastern areas in the USA. Overall, the shade tolerance index constitutes a new quantitative approach that can be used to understand and predict succession of forested ecosystems and biogeographic patterns.

  18. Plasticity to simulated shade is associated with altitude in structured populations of Arabidopsis thaliana.

    Science.gov (United States)

    Botto, Javier F

    2015-07-01

    Plants compete for photosynthesis light and induce a shade avoidance syndrome (SAS) that confers an important advantage in asymmetric competition for light at high canopy densities. Shade plasticity was studied in a greenhouse experiment cultivating Arabidopsis thaliana plants from 15 populations spread across an altitudinal gradient in the northeast area of Spain that contain a high genetic variation into a reduced geographical range. Plants were exposed to sunlight or simulated shade to identify the range of shade plasticity. Fourteen vegetative, flowering and reproductive traits were measured throughout the life cycle. Shade plasticity in flowering time and dry mass was significantly associated with the altitude of population origin. Plants from coastal populations showed higher shade plasticity indexes than those from mountains. The altitudinal variation in flowering leaf plasticity adjusted negatively with average and minimum temperatures, whereas dry mass plasticity was better explained by negative regressions with the average, maximum and minimum temperatures, and by a positive regression with average precipitation of the population origin. The lack of an altitudinal gradient for the widest number of traits suggests that shade light could be a driver explaining the distribution pattern of individuals in smaller geographical scales than those explored here. © 2014 John Wiley & Sons Ltd.

  19. Analysis of camphorquinone in composite resins as a function of shade.

    Science.gov (United States)

    Alvim, Hugo H; Alecio, Alberto C; Vasconcellos, Walison A; Furlan, Maysa; de Oliveira, José E; Saad, Jose R C

    2007-10-01

    To identify and quantify the camphorquinone (CQ) used in different brands of composite resins as a function of the shade analyzed. Filtek Z250 A3 (FZA3), Filtek Z-250 Incisal (FZI), Pyramid Enamel A1 (PEA1), Pyramid Enamel Translucent (PET), Filtek Supreme A3E (FSA3) and Filtek Supreme GT (FSGT) were used. Five hundred milligrams of each resin were weighed and then dissolved in 1.0 ml of methanol. The samples were centrifuged to accelerate the sedimentation of the inorganic particles. 0.8 ml of the supernatant solution was collected with a pipette and assessed under gas chromatography coupled to the mass spectrometer (GC-MS). The results were compared to pure CQ solutions, used as a standard. Student's t-test, (p=0.05) significant at the level of 5%, compared the results of each brand shade. A smaller amount of camphorquinone was found in Filtek Z-250 (FZI) resin incisal shade when compared to (FZA3) A3 shade. On the other hand, Filtek Supreme resin featured a statistically larger camphorquinone amount in the incisal shade. In Pyramid Enamel resin camphorquinone was found only in shade A1, while the photoinitiator used in the Translucent shade was not identified. Based on the data obtained, it is possible to conclude that a single composite resin brand may feature differences in amount and type of photoinitiator used.

  20. Are sun- and shade-type anatomy required for the acclimation of Neoregelia cruenta?

    Directory of Open Access Journals (Sweden)

    FERNANDA REINERT

    2013-06-01

    Full Text Available Sun and shade plants are often discriminated by a number of sun- and shade-type anatomies. Nonetheless, we propose that among tank-bromeliads, changes in rosette architecture satisfy the requirements for coping with contrasting light levels. The tank-bromeliad Neoregelia cruenta naturally colonises sub-habitats ranging from full exposure to direct sunlight, to shaded environments in sand ridge plains. We quantified anatomical and morphological traits of leaves and rosettes of N. cruenta grown under sun and shade conditions. Cells with undulated lateral walls within the water parenchyma are for the first time described for the family. Under high light, leaf blades were wider, shorter, and yellowish. The rosette diameter of sun plants was less than half that of shade plants. Sun leaves overlapped with neighbouring leaves for most of their length, forming a cylindrical rosette where water accumulates. Shade leaves only overlapped in the centre of the rosette. Most anatomical traits were similar under both growth conditions. Stomata were absent from the base of sun leaves, which is probably explained by limited gas exchange at the base of the tight sun-type rosette. Data suggest that the ability of N. cruenta to acclimate to sun and shade is better explained by changes in rosette architecture than by leaf anatomy.

  1. Characteristic Evolution and Matching

    Directory of Open Access Journals (Sweden)

    Winicour Jeffrey

    2009-04-01

    Full Text Available I review the development of numerical evolution codes for general relativity based upon the characteristic initial value problem. Progress is traced from the early stage of 1D feasibility studies to 2D axisymmetric codes that accurately simulate the oscillations and gravitational collapse of relativistic stars and to current 3D codes that provide pieces of a binary black hole spacetime. Cauchy codes have now been successful at simulating all aspects of the binary black hole problem inside an artificially constructed outer boundary. A prime application of characteristic evolution is to eliminate the role of this artificial outer boundary via Cauchy-characteristic matching, by which the radiated waveform can be computed at null infinity. Progress in this direction is discussed.

  2. Electromagnetic wave matching device

    International Nuclear Information System (INIS)

    Hirata, Yosuke; Mitsunaka, Yoshika; Hayashi, Ken-ichi; Ito, Yasuyuki.

    1997-01-01

    The present invention provides an electromagnetic wave matching capable of reducing a cost for the transmission system in a system of using electromagnetic waves for plasma heating of a thermonuclear reactor. Namely, incident electromagnetic waves are reflected by using a plurality of phase correction mirrors. The reflected electromagnetic waves are connected to an external transmission system through an exit. The phase correction mirrors have such a shape to receive a plurality of beam-like electromagnetic waves and output electromagnetic waves by the number different from the number of the received electromagnetic wave beams having a predetermined distribution. Further, at least two of the phase correction mirrors have such a shape to change the phase of the electromagnetic waves beams incident to the reflection surface of the phase correction mirrors by a predetermined amount corresponding to the position of the reflection surface. Then, the cost for transmission system can greatly be reduced. (I.S.)

  3. Vegetative and productive aspects of organically grown coffee cultivars under shaded and unshaded systems

    Directory of Open Access Journals (Sweden)

    Marta dos Santos Freire Ricci

    2011-08-01

    Full Text Available Although Coffea arabica species has its origin in the African understories, there is great resistance on the part of the Brazilian producers for growing this species under agroforestry systems as they fear that shading reduces production. This study aimed at evaluating some vegetative traits and the productivity of organically grown coffee (Coffea arabica L. cultivars under shaded and unshaded systems. Twelve treatments consisting of two cultivation systems (shaded and unshaded and six coffee cultivars were arranged in randomized blocks with four replicates, in a split-plot scheme. Shading was provided by banana (Musa sp. and coral bean plants (Erythrinaverna. Shading delayed fruit maturation. Late maturation cultivars, such as the Icatu and the Obatã, matured early in both cultivation systems, while medium and early maturation cultivars presented late maturation. Cultivation in the shaded system increased the leaf area and the number of lower branches, decreased the number of productive nodes per branch, and increased the distance between the nodes and the number of leaves present in the branches. Cultivation in the unshaded system presented greater number of plants with branch blight in relation to plants grown in the shade. The productivity of the cultivars was not different, at 30.0 processed bags per hectare in the shaded system, and 25.8 processed bags per hectare in the unshaded system. The most productive cultivars in the shaded system were the Tupi, the Obatã, and the Catuaí, while no differences between cultivars were obtained in the unshaded system.

  4. Physiological and behavioral responses of Nellore steers to artificial shading in an intensive production system

    Directory of Open Access Journals (Sweden)

    Diogo Alves da Costa Ferro

    2016-09-01

    Full Text Available The influence of artificial shading on environmental variables and on behavioral responses of Nellore steers in an intensive production system was evaluated in this study. The experiment was conducted in the experimental feedlot of the Department of Animal Science at Universidade Estadual de Goiás, from July to October 2014. Forty-eight male Nellore cattle with an average initial weight of 310 kg were kept in double 24-m2 stalls, in a total of 24 stalls. Of these, six were in the open air; six were covered with black shade netting of 30% light interception; six with black shade netting 50%; and six with black shade netting 80%, providing 6 m2 of shade per stall. Temperature-humidity index (THI and respiratory frequency (RF were assessed twice weekly and behavior was evaluated fortnightly during 12 h, between 06:00 h and 18.00 h. Feeding behavior, rumination, rest, and social activities such as body care and playful and abnormal activities were observed. A significant increase was found in THI and RF as the shading levels decreased, while a significant difference was recorded in rest and in other activities, water intake, and play behavior. Rest time and playful behavior increased significantly, and other activities and water intake decreased with the increase in shading levels. Shading does not change the time spent on feeding behaviors and rumination, or the frequencies of urination, defecation, cleaning other animals, self-cleaning, and social and abnormal types of behavior. The use of black shade netting of 80% light interception provides greater comfort to animals, promoting welfare and quality of life to them.

  5. Influence of resin cement shade on the color and translucency of ceramic veneers

    Directory of Open Access Journals (Sweden)

    Daiana Kelly Lopes HERNANDES

    Full Text Available ABSTRACT Objective This in vitro study evaluated the effect of two different shades of resin cement (RC- A1 and A3 layer on color change, translucency parameter (TP, and chroma of low (LT and high (HT translucent reinforced lithium disilicate ceramic laminates. Material and Methods One dual-cured RC (Variolink II, A1- and A3-shade, Ivoclar Vivadent was applied to 1-mm thick ceramic discs to create thin RC films (100 µm thick under the ceramics. The RC was exposed to light from a LED curing unit. Color change (ΔE of ceramic discs was measured according to CIEL*a*b* system with a standard illuminant D65 in reflectance mode in a spectrophotometer, operating in the light range of 360-740 nm, equipped with an integrating sphere. The color difference between black (B and white (W background readings was used for TP analysis, while chroma was calculated by the formula C*ab=(a*2+b*2½. ΔE of 3.3 was set as the threshold of clinically unacceptable. The results were evaluated by two-way ANOVA followed by Tukey's post hoc test. Results HT ceramics showed higher ΔE and higher TP than LT ceramics. A3-shade RC promoted higher ΔE than A1-shade cement, regardless of the ceramic translucency. No significant difference in TP was noted between ceramic discs with A1- and those with A3-shade cement. Ceramic with underlying RC showed lower TP than discs without RC. HT ceramics showed lower chroma than LT ceramics, regardless of the resin cement shade. The presence of A3-shade RC resulted in higher chroma than the presence of A1-shade RC. Conclusions Darker underlying RC layer promoted more pronounced changes in ceramic translucency, chroma, and shade of high translucent ceramic veneers. These differences may not be clinically differentiable.

  6. Influence of resin cement shade on the color and translucency of ceramic veneers.

    Science.gov (United States)

    Hernandes, Daiana Kelly Lopes; Arrais, Cesar Augusto Galvão; Lima, Erick de; Cesar, Paulo Francisco; Rodrigues, José Augusto

    2016-01-01

    This in vitro study evaluated the effect of two different shades of resin cement (RC- A1 and A3) layer on color change, translucency parameter (TP), and chroma of low (LT) and high (HT) translucent reinforced lithium disilicate ceramic laminates. One dual-cured RC (Variolink II, A1- and A3-shade, Ivoclar Vivadent) was applied to 1-mm thick ceramic discs to create thin RC films (100 µm thick) under the ceramics. The RC was exposed to light from a LED curing unit. Color change (ΔE) of ceramic discs was measured according to CIEL*a*b* system with a standard illuminant D65 in reflectance mode in a spectrophotometer, operating in the light range of 360-740 nm, equipped with an integrating sphere. The color difference between black (B) and white (W) background readings was used for TP analysis, while chroma was calculated by the formula C*ab=(a*2+b*2)½. ΔE of 3.3 was set as the threshold of clinically unacceptable. The results were evaluated by two-way ANOVA followed by Tukey's post hoc test. HT ceramics showed higher ΔE and higher TP than LT ceramics. A3-shade RC promoted higher ΔE than A1-shade cement, regardless of the ceramic translucency. No significant difference in TP was noted between ceramic discs with A1- and those with A3-shade cement. Ceramic with underlying RC showed lower TP than discs without RC. HT ceramics showed lower chroma than LT ceramics, regardless of the resin cement shade. The presence of A3-shade RC resulted in higher chroma than the presence of A1-shade RC. Darker underlying RC layer promoted more pronounced changes in ceramic translucency, chroma, and shade of high translucent ceramic veneers. These differences may not be clinically differentiable.

  7. Match Analysis in Volleyball: a systematic review

    Directory of Open Access Journals (Sweden)

    Miguel Silva

    2016-03-01

    Full Text Available The present article aims to review the available literature on match analysis in adult male Volleyball. Specific key words "performance analysis", "match analysis", "game analysis", "notational analysis", "tactical analysis", "technical analysis", "outcome" and "skills" were used to search relevant databases (PubMed, Web of Science, SportDiscus, Academic Search Complete and the International Journal of Performance Analysis in Sport. The research was conducted according to PRISMA (Preferred Reporting Items for Systematic reviews and Meta analyses guidelines. Of 3407 studies initially identified, only 34 were fully reviewed, and their outcome measures extracted and analyzed. Studies that fit all inclusion criteria were organized into two levels of analysis, according to their research design (comparative or predictive and depending on the type of variables analyzed (skills and their relationship with success, play position and match phase. Results show that from a methodological point of view, comparative studies where currently complemented with some predictive studies. This predictive approach emerged with the aim to identify the relationship between variables, considering their possible interactions and consequently its effect on team performance, contributing to a better understanding of Volleyball game performance through match analysis. Taking into account the limitations of the reviewed studies, future research should provide comprehensive operational definitions for the studied variables, using more recent samples, and consider integrating the player positions and match phase contexts into the analysis of Volleyball.

  8. Quantity precommitment and price matching

    DEFF Research Database (Denmark)

    Tumennasan, Norovsambuu

    We revisit the question of whether price matching is anti-competitive in a capacity constrained duopoly setting. We show that the effect of price matching depends on capacity. Specifically, price matching has no effect when capacity is relatively low, but it benefits the firms when capacity...... is relatively high. Interestingly, when capacity is in an intermediate range, price matching benefits only the small firm but does not affect the large firm in any way. Therefore, one has to consider capacity seriously when evaluating if price matching is anti-competitive. If the firms choose their capacities...... simultaneously before pricing decisions, then the effect of price matching is either pro-competitive or ambiguous. We show that if the cost of capacity is high, then price matching can only (weakly) decrease the market price. On the other hand, if the cost of capacity is low, then the effect of price matching...

  9. Constructivist-Based Asynchronous Tutorial to Improve Transfer between Math and Chemistry Domains: Design, Implementation, and Analysis of the Impact of ReMATCH on General Chemistry Course Performance and Confidence

    Science.gov (United States)

    Barker, M. Danielle

    2011-07-01

    The two-year implementation of ReMATCH, a web-based math and problem-solving tutorial, in a traditionally arranged general chemistry classroom at the University of Kansas examined the impact of a designed intervention to assist students with the transfer of their mathematical knowledge to a chemistry context where it could be readily used for quantitative problem solving. The ReMATCH intervention, designed on constructivist-based pedagogies, focused on illuminating the expert-processes of problem solving and transferring knowledge across domains to the novice chemistry. The two implementations of ReMATCH -- once as lab assignments and once lecture assignments -- resulted in very different student responses to the intervention. However, within both, the beneficial effects of sustained ReMATCH-use were visible. In 2006, students who attempted all of the ReMATCH homework assignments were predicted to earn ˜5% higher on their total exam points. The 2007 implementation of ReMATCH demonstrated that students who attempted all of the homework problems and visited at least half of the ReMATCH tutorial pages were predicted to earn ˜8.5% higher on their total exam points. Additionally, use of ReMATCH in 2006 also resulted in increased confidence (as measured by comfort-level) with some of the math-related chemistry topics covered in ReMATCH. In 2007, when only students who attempted all of the ReMATCH problems were considered, it became clear that individuals who were initially less confident in their math-related chemistry skills were more likely to view more of the ReMATCH tutorial pages. When students with lower initial comfort-levels on these topics viewed at least half of the ReMATCH tutorial pages, they were able to compensate for their initially lower levels of confidence and were equally comfortable with most of the math-related chemistry topics by the final survey. Student interactions with and perceptions of ReMATCH showed that student attitudes towards ReMATCH

  10. Integrated control of sun shades, daylight and artificial light; Integreret regulering af solafskaermning, dagslys og kunstlys

    Energy Technology Data Exchange (ETDEWEB)

    Johnsen, K.; Christoffersen, J.; Soerensen, Henrik; Jessen, G.

    2011-07-01

    The project established a basis of calculation and a practical basis for optimum choice of solar shading and integrated control strategies for both new buildings and for office, commercial and institutional buildings to be renovated with new calculation models for controlling solar shading integrated in the BSim program. A complete and applicable model for optimum, integrated solar shading control was established, focusing on thermal and visual comfort criteria towards energy consumption for heating, cooling and lighting. A prototype was tested in the daylight laboratory at Danish Building Research Institute-Aalborg University and at University of Southern Denmark. (LN)

  11. Partial Shading Detection in Solar System Using Single Short Pulse of Load

    Directory of Open Access Journals (Sweden)

    Bartczak Mateusz

    2017-03-01

    Full Text Available A single photovoltaic panel under uniform illumination has only one global maximum power point, but the same panel in irregularly illuminated conditions can have more maxima on its power-voltage curve. The irregularly illuminated conditions in most cases are results of partial shading. In the work a single short pulse of load is used to extract information about partial shading. This information can be useful and can help to make some improvements in existing MPPT algorithms. In the paper the intrinsic capacitance of a photovoltaic system is used to retrieve occurrence of partial shading.

  12. Heat loads of transparent construction elements and sun shading systems; Waermelasten transparenter Bauteile und Sonnenschutzsysteme

    Energy Technology Data Exchange (ETDEWEB)

    Simmler, H.; Binder, B.; Vonbank, R.

    2000-07-01

    This report for the Swiss Federal Office of Energy (SFOE) describes a test system installed at the Swiss Federal Laboratories for Materials Testing and Research (EMPA) in Duebendorf, Switzerland, for the investigation of heat gain by glazing elements often used in modern architecture and the efficiency of shading elements. The two climatically controlled test cells for the measurement of the thermal characteristics of facade elements and shading systems are described and the results of measurements made using various types of glazing and shading systems - including external and internal lamellas, blinds and extendible fabric sunshades - are presented. The results are analysed and interpreted in a comprehensive appendix.

  13. Potential Nitrification and Nitrogen Mineral of Soil in Coffee Agroforestry System with Various Shading Trees

    Directory of Open Access Journals (Sweden)

    Purwanto .

    2007-05-01

    Full Text Available The role of shading trees in coffee farms has been well understood to establish suitable condition for the growth of coffee trees, on the other hand their role in nitrogen cycle in coffee farming is not yet well understood. The objectives of this study are to investigate the influence of various legume shading trees on the concentration of soil mineral N (N-NH4 + and N-NO3-, potential nitrification and to study the controlling factors of nitrification under field conditions. This field explorative research was carried out in Sumberjaya, West Lampung. Twelve observation plots covered four land use systems (LUS, i.e. 1 Coffee agroforestry with Gliricidiasepium as shade trees; 2 Coffee agroforestry with Gliricidiaas shade trees and Arachis pintoias cover crops; 3Coffee agroforestry with Paraserianthes falcataria as shade trees; and 4 Mixed/multistrata coffee agroforestry with Gliricidiaand other fruit crops as shade trees. Measurements of soil mineral-N concentration were carried out every three weeks for three months. Results showed that shade tree species in coffee agroforestry significantly affected concentrations of soil NH4 +, NO3- and potential nitrification. Mixed coffee agroforestry had the highest NH4+/N-mineral ratio (7.16% and the lowest potential nitrification (0.13 mg NO2-kg-1 hour -1 compared to other coffee agroforestry systems using single species of leguminous shade trees. Ratio of NH4 + /N-mineral increased 0.8—21% while potential nitrification decreased 55—79% in mixed coffee agroforestry compared to coffee agroforestry with Gliricidia or P. falcatariaas shade trees. Coffee agroforestry with P. falcatariaas shade trees had potential nitrification 53% lower and ratio of NH4 + /N-mineral concentration 20% higher than that with Gliricidia. Coffee agroforestry with P. falcataria as shade trees also had organic C content 17% higher, total N 40% higher, available P 112% higher than that