WorldWideScience

Sample records for severe budget cuts

  1. SAY NO TO NEW BUDGET CUTS !

    CERN Multimedia

    STAFF ASSOCIATION

    2010-01-01

    In June, CERN Finance Committee postponed its proposals for the 2011 budget and the Director-General’s medium-term plan (2012–2015). The Member State delegations asked for a significant reduction in these budgets. The Staff Association condemns this request for new budget cuts which shows a short-term political vision. It is therefore organizing a demonstration on 25th August to defend basic research in Europe. On this day your presence is indispensable. Enough of simply getting by ! We know that budget cuts and the reduction of deficits are topical in several countries. The areas of research and training are also affected. However, in the case of CERN, severe budgetary constraints have been imposed for several years now, in particular since 1996 when the Organization’s budget was reduced by around 10%, just when the construction of the LHC was due to start. Since then, 100 million Swiss francs have been lost each year, reducing CERN’s resources to a minimum. All e...

  2. Pain Relief for Budget Cuts.

    Science.gov (United States)

    Fultz, David A.

    1983-01-01

    The Grand Blanc (Michigan) Community School District sets budget priorities by (1) surveying students, taxpayers, and teachers to learn their preferences for current programs and services; (2) determining the costs of state-mandated programs; (3) listing nonmandated programs and determining their costs; and (4) considering proposed new programs.…

  3. Budget Cuts: Financial Aid Offices Face Budget Cuts and Increasing Workload. Quick Scan Survey Results

    Science.gov (United States)

    National Association of Student Financial Aid Administrators (NJ1), 2010

    2010-01-01

    The majority of college financial aid offices have seen cuts to their operating budgets this year compared to the 2007-08 academic year when the recession began, according to the National Association of Student Financial Aid Administrator's latest QuickScan Survey. Sixty-two percent of financial aid offices reported operating budget cuts this year…

  4. Cern faces 260m euro budget cuts

    CERN Multimedia

    Banks, Michael

    2010-01-01

    "The Cern particle-physics lab near Geneva is to slash about 260m euro ($340m) from its budget for 2011-2015. The cut, which was approved by Cern's council last month, will require the lab to scale back research into future particles accelerators" (0.5 page)

  5. 5 Tips on How to Cope with Budget Cuts

    Science.gov (United States)

    Balsley, Jessica

    2011-01-01

    Art educators, by nature, are very creative people. Their right brains just can't help themselves when it comes to generating new and innovative ideas for the art room. With budget cuts and hard times for schools becoming the norm, art educators must also become creative when it comes to finding money in their budget. This article presents five…

  6. Proposed budget cuts threaten to short-circuit Grid network

    CERN Multimedia

    Butler, D

    2001-01-01

    Changes to the budget for the European sixth Framework programme may jeapardize the Grid project. The EU Parliament have asked to cut the budget for infrastructure to 500 million euros from 900 and of this 150 million will probably be allocated to Ge the pan-European research network (1 page).

  7. Health needs, budget cuts & military spending.

    Science.gov (United States)

    1991-01-01

    A healthy, well-fed, educated populace is synonymous with a prospering economy. Yet, when planning their budgets, governments tend to emphasize infrastructural/industrial projects and defence rather than investing in health, education and other social programmes to eliminate the widespread poverty and high mortality of its population, which would assure a more promising future in the long-term. As citizens, nurses are responsible for initiating and supporting action to meet the health and social needs of the public. And in keeping with ICN's 1989 resolution on nuclear war, INR presents some facts on social and defence spending to show how health needs are often being deprived by emphasis on others sectors, particularly defence. The aim is "to encourage nurses to critically appraise expenditure on health and welfare at a national and global level in relation to that spent on conventional and nuclear arms and to assist nurses to develop strategies of action to contribute to international peace."

  8. The reason why the budget for the Yucca mountain project is cut

    International Nuclear Information System (INIS)

    Wang Ju

    2010-01-01

    This paper introduces the event that the 2009 and 2010 budgets for the Yucca Mountain Spent Fuel Disposal Project is cut. The political, ethnical, technical, economical and resource recycling reasons for the budget cutting are analyzed. It is proposed that the strong objection of Senator Harry Reid and the political consideration are the main reasons for budget cutting. Many objections on the budget cutting are also introduced. (authors)

  9. The Rational Approach to Budget Cuts: One University's Experience.

    Science.gov (United States)

    Hardy, Cynthia

    1988-01-01

    The University of Montreal's choice of the rational model of decision-making in managing budget cutbacks is explored and compared with other approaches, including the bureaucratic, garbage can, political, and collegial models. (MSE)

  10. Reacting to the power politics [how the UKAEA will react to budget cuts

    International Nuclear Information System (INIS)

    Collier, J.

    1988-01-01

    An interview with John Collier in which he tells how the UKAEA will cope with budget cuts and closures. The two major influences will be: 1. the government's decision to drastically cut the funding for fast reactor R and D., and 2. the planned privatisation of the electricity supply industry. (U.K.)

  11. A Fiscal Cliff: The Current U.S. Federal Budget, Potential Cuts, and Impacts on Science Funding

    Science.gov (United States)

    Uhlenbrock, K. M.; Landau, E. A.; Hankin, E. R.

    2012-12-01

    As lawmakers on Capitol Hill face challenges to reach an agreement on how to cut the deficit while growing the economy, scientists must join the discussion and outline the serious impacts cuts to federal science programs will have on our society. Consistent and sustained federal science funding (discretionary spending) is an ever increasing struggle with the rising costs of mandatory spending and decrease in revenues. In 2011 Congress passed the Budget Control Act, which will require automatic across-the-board cuts, known as sequestration, and will take effect on 2 January 2013. Estimated cuts of $1.2 trillion and discretionary spending caps set at Fiscal Year 2012 levels will trigger non-defense program cuts of 9.8% in the first year as reported by the Congressional Research Service. Funding from non-defense program agencies such as NSF, NASA, DOE, NOAA, USGS, and others drive science and technological innovation, support public safety, create jobs, educate generations of scientists, stimulate the economy, protect our environment, and enrich lives. With non-defense discretionary programs representing less than one-fifth of the federal budget, severe cuts to these programs will not alleviate our deficit, but instead restrict our growth.

  12. Comparative assessment of several dismantling cutting tools

    International Nuclear Information System (INIS)

    Pilot, G.; Bernard, J.; Lorin, C.; Ravera, J.P.

    1992-01-01

    The research work relates to semi-industrial scale testing in air of various relevant cutting tools (plasma torch, arc-air, grinder, alternating saw) for mild steel and stainless steel with thicknesses of 10, 30 and 50 mm. Its originality is a comparison between tools in the same normalized conditions of use in order to determine the performances of the different techniques and to measure all the generated secondary solid wastes. Among the tested tools, the plasma torch is the fastest and the alternating saw the slowest. The arc-air produces the widest kerf and thus the most wastes. The electrode of the arc-air and the wheel of the grinder wear the swiftest. The alternating saw generates the least mass of aerosols. (author). 1 ref., 7 figs

  13. 75 FR 52037 - Welding, Cutting and Brazing Standard; Extension of the Office of Management and Budget's (OMB...

    Science.gov (United States)

    2010-08-24

    ...] Welding, Cutting and Brazing Standard; Extension of the Office of Management and Budget's (OMB) Approval... requirements contained in the Welding, Cutting and Brazing Standard (29 CFR part 1910, subpart Q). The information collected is used by employers and workers whenever welding, cutting and brazing are performed...

  14. 78 FR 53159 - Standard for Welding, Cutting, and Brazing; Extension of the Office of Management and Budget's...

    Science.gov (United States)

    2013-08-28

    ...] Standard for Welding, Cutting, and Brazing; Extension of the Office of Management and Budget's (OMB... collection requirements contained in the Standard for Welding, Cutting, and Brazing (29 CFR Part 1910, Subpart Q). The information collected is used by employers and workers whenever welding, cutting, and...

  15. Changes in North Carolina maternal health service use and outcomes among medicaid-enrolled pregnant women during state budget cuts.

    Science.gov (United States)

    Cilenti, Dorothy; Kum, Hye-Chung; Wells, Rebecca; Whitmire, J Timothy; Goyal, Ravi K; Hillemeier, Marianne M

    2015-01-01

    The recent recession has weakened the US health and human service safety net. Questions about implications for mothers and children prompted this study, which tested for changes in maternal service use and outcomes among North Carolina women with deliveries covered through Medicaid before and after a year of significant state budget cuts. Data for Medicaid covered deliveries from April-June 2009 (pre) and from April-June 2010 (post) were derived from birth certificates, Medicaid claims and eligibility files, and WIC (Special Supplemental Food Program for Women, Infants and Children) records. These time periods represent the quarter immediately before as well as the final quarter of a state fiscal year 2010 (July 2009-June 2010) characterized by substantial state budget cuts, including an October 2009 reduction in reimbursement rates for maternity care coordination. We examined how often women received medical care, maternity care coordination, family planning services, and the average numbers of obstetrical encounters, as well as the prevalence of excessive pregnancy weight gain, preterm delivery, and low birth weight. By the end of a year of substantial state budget cuts, women covered through Medicaid had fewer obstetrical visits in all trimesters as well as postpartum (P budget cuts. Maternal and infant child health outcomes measured in this study did not change during that year. Future monitoring is warranted to ensure that maternal health service access remains adequate.

  16. The Experiences of Low-Income Latino/a Students in the California Community College System at a Time of Education Budget Cuts

    Science.gov (United States)

    Chacon, Justin Akers

    2013-01-01

    Budget cuts have reduced courses and student services within California community colleges. This coincides with the growth of low-income Latino male (Latinos) and Latina female (Latinas) student enrollment. Budget cuts have been implemented throughout the system, including in the Extended Opportunity Programs and Services (EOPS), which…

  17. The nitrogen, carbon and greenhouse gas budget of a grazed, cut and fertilised temperate grassland

    Science.gov (United States)

    Jones, Stephanie K.; Helfter, Carole; Anderson, Margaret; Coyle, Mhairi; Campbell, Claire; Famulari, Daniela; Di Marco, Chiara; van Dijk, Netty; Sim Tang, Y.; Topp, Cairistiona F. E.; Kiese, Ralf; Kindler, Reimo; Siemens, Jan; Schrumpf, Marion; Kaiser, Klaus; Nemitz, Eiko; Levy, Peter E.; Rees, Robert M.; Sutton, Mark A.; Skiba, Ute M.

    2017-04-01

    Intensively managed grazed grasslands in temperate climates are globally important environments for the exchange of the greenhouse gases (GHGs) carbon dioxide (CO2), nitrous oxide (N2O) and methane (CH4). We assessed the N and C budget of a mostly grazed and occasionally cut and fertilised grassland in SE Scotland by measuring or modelling all relevant imports and exports to the field as well as changes in soil C and N stocks over time. The N budget was dominated by import from inorganic and organic fertilisers (21.9 g N m-2 a-1) and losses from leaching (5.3 g N m-2 a-1), N2 emissions (2.9 g N m-2 a-1), and NOx and NH3 volatilisation (3.9 g N m-2 a-1), while N2O emission was only 0.6 g N m-2 a-1. The efficiency of N use by animal products (meat and wool) averaged 9.9 % of total N input over only-grazed years (2004-2010). On average over 9 years (2002-2010), the balance of N fluxes suggested that 6.0 ± 5.9 g N m-2 a-1 (mean ± confidence interval at p > 0.95) were stored in the soil. The largest component of the C budget was the net ecosystem exchange of CO2 (NEE), at an average uptake rate of 218 ± 155 g C m-2 a-1 over the 9 years. This sink strength was offset by carbon export from the field mainly as grass offtake for silage (48.9 g C m-2 a-1) and leaching (16.4 g C m-2 a-1). The other export terms, CH4 emissions from the soil, manure applications and enteric fermentation, were negligible and only contributed to 0.02-4.2 % of the total C losses. Only a small fraction of C was incorporated into the body of the grazing animals. Inclusion of these C losses in the budget resulted in a C sink strength of 163 ± 140 g C m-2 a-1. By contrast, soil stock measurements taken in May 2004 and May 2011 indicated that the grassland sequestered N in the 0-60 cm soil layer at 4.51 ± 2.64 g N m-2 a-1 and lost C at a rate of 29.08 ± 38.19 g C m-2 a-1. Potential reasons for the discrepancy between these estimates are probably an underestimation of C losses, especially from

  18. Cutting

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Cutting KidsHealth / For Teens / Cutting What's in this article? ... Getting Help Print en español Cortarse What Is Cutting? Emma's mom first noticed the cuts when Emma ...

  19. NOAA budget would boost satellite funding but cut some key areas

    Science.gov (United States)

    Showstack, Randy

    2012-03-01

    The White House's proposed fiscal year (FY) 2013 budget for the National Oceanic and Atmospheric Administration (NOAA), announced on 13 February, looks favorable at first glance. The administration's request calls for $5.1 billion, an increase of $153 million (3.1%) above the FY 2012 estimated budget. However, the increase for NOAA satellites is $163 million, which means that other areas within the agency would be slated for decreased funding, including programs within the National Ocean Service (NOS), National Marine Fisheries Service (NMFS), National Weather Service (NWS), and some NOAA education programs. The proposed overall budget for the agency “reflects the overarching importance of weather satellites to public safety, to national security, and to the economy,” NOAA director Jane Lubchenco said at a 16 February briefing, noting that difficult choices were made regarding the budget. “Due to significant resources required for our weather satellites and the economic conditions in the country, other parts of our budget have been reduced, in some cases quite significantly,” she said. She added that the imperative to fund both the Joint Polar Satellite System (JPSS) and geostationary satellites in FY 2013 “imposes serious constraints on the rest of NOAA's budget.”

  20. The Rational Approach to Budget Cuts: One University's Experience. ASHE 1987 Annual Meeting Paper.

    Science.gov (United States)

    Hardy, Cynthia

    The experiences of the University of Montreal in using a rational-analytic framework to allocate resources at a time of budget costs are discussed. The following characteristics for rational decision-making are identified and applied to the University of Montreal: whether goals were known, whether alternative methods of resource allocation were…

  1. Female genital cutting in Hargeisa, Somaliland: is there a move towards less severe forms?

    Science.gov (United States)

    Lunde, Ingvild Bergom; Sagbakken, Mette

    2014-05-01

    According to several sources, little progress is being made in eliminating the cutting of female genitalia. This paper, based on qualitative interviews and observations, explores perceptions of female genital cutting and elimination of the phenomenon in Hargeisa, Somaliland. Two main groups of participants were interviewed: (1) 22 representatives of organisations whose work directly relates to female genital cutting; and (2) 16 individuals representing different groups of society. It was found that there is an increasing use of medical staff and equipment when a girl undergoes the procedure of female genital cutting; the use of terminology is crucial in understanding current perceptions of female genital cutting; religion is both an important barrier and facilitator of elimination; and finally, traditional gender structures are currently being challenged in Hargeisa. The findings of this study suggest that it is important to consider current perceptions on practices of female genital cutting and on abandonment of female genital cutting, in order to gain useful knowledge on the issue of elimination. The study concludes that elimination of female genital cutting is a multifaceted process which is constantly negotiated in a diversity of social settings. Copyright © 2014 Reproductive Health Matters. Published by Elsevier Ltd. All rights reserved.

  2. Estimating the impact of state budget cuts and redirection of prevention resources on the HIV epidemic in 59 California local health departments.

    Science.gov (United States)

    Lin, Feng; Lasry, Arielle; Sansom, Stephanie L; Wolitski, Richard J

    2013-01-01

    In the wake of a national economic downturn, the state of California, in 2009-2010, implemented budget cuts that eliminated state funding of HIV prevention and testing. To mitigate the effect of these cuts remaining federal funds were redirected. This analysis estimates the impact of these budget cuts and reallocation of resources on HIV transmission and associated HIV treatment costs. We estimated the effect of the budget cuts and reallocation for California county health departments (excluding Los Angeles and San Francisco) on the number of individuals living with or at-risk for HIV who received HIV prevention services. We used a Bernoulli model to estimate the number of new infections that would occur each year as a result of the changes, and assigned lifetime treatment costs to those new infections. We explored the effect of redirecting federal funds to more cost-effective programs, as well as the potential effect of allocating funds proportionately by transmission category. We estimated that cutting HIV prevention resulted in 55 new infections that were associated with $20 million in lifetime treatment costs. The redirection of federal funds to more cost-effective programs averted 15 HIV infections. If HIV prevention funding were allocated proportionately to transmission categories, we estimated that HIV infections could be reduced below the number that occurred annually before the state budget cuts. Reducing funding for HIV prevention may result in short-term savings at the expense of additional HIV infections and increased HIV treatment costs. Existing HIV prevention funds would likely have a greater impact on the epidemic if they were allocated to the more cost-effective programs and the populations most likely to acquire and transmit the infection.

  3. The impact of economic downturns and budget cuts on homelessness claim rates across 323 local authorities in England, 2004-12.

    OpenAIRE

    Loopstra, R; Reeves, A; Barr, B; Taylor-Robinson, D; McKee, M; Stuckler, D

    2015-01-01

    It is unclear why rates of homelessness claims in England have risen since 2010. We used variations in rates across local authorities to test the impact of economic downturns and budget cuts. Using cross-area fixed effects models of data from 323 UK local authorities between 2004 and 2012, we evaluated associations of changes in statutory homelessness rates with economic activity (Gross Value Added per capita), unemployment, and local and central government expenditure. Each 10% fall in econo...

  4. States' experiences with loan repayment programs for health care professionals in a time of state budget cuts and NHSC expansion.

    Science.gov (United States)

    Pathman, Donald E; Morgan, Jennifer Craft; Konrad, Thomas R; Goldberg, Lynda

    2012-01-01

    The landscape of education loan repayment programs for health care professionals has been turbulent in recent years, with doubling of the funding for the National Health Service Corps (NHSC) and cuts in funding for some states' programs. We sought to understand how this turbulence is being felt within the state offices involved in recruiting clinicians to rural and urban underserved communities. We conducted key informant telephone interviews with staff of state offices of rural health, primary care organizations, and/or related organizations within 28 diverse states to answer questions about perceived changes and interplay among solely state-funded loan repayment programs, joint state-federal programs, and the NHSC federal program. Interviews were transcribed, formally analyzed, and key issues summarized. Informants reported that solely state-funded and joint state-federal loan repayment programs are greatly valued for their ability to target a state's particular needs and to complement the NHSC federal program. However, budgets for state programs have been threatened, reduced, or eliminated entirely in many cases. All informants positively perceived the NHSC's recent growth and changes, which they feel are helping fill important workforce needs for their states. Nevertheless, the much larger NHSC federal program now competes with some states' programs for clinicians and service sites; states' programs are pushed to adjust their operations to maintain a unique "niche". States' key recruiters lament reductions in funding for states' loan repayment programs, and welcome the NHSC's recent growth and changes. Better coordination is needed to minimize competition and maximize complementarity between state and federal programs. © 2012 National Rural Health Association.

  5. How clear-cutting affects fire severity and soil properties in a Mediterranean ecosystem.

    Science.gov (United States)

    Francos, Marcos; Pereira, Paulo; Mataix-Solera, Jorge; Arcenegui, Victoria; Alcañiz, Meritxell; Úbeda, Xavier

    2018-01-15

    Forest management practices in Mediterranean ecosystems are frequently employed to reduce both the risk and severity of wildfires. However, these pre-fire treatments may influence the effects of wildfire events on soil properties. The aim of this study is to examine the short-term effects of a wildfire that broke out in 2015 on the soil properties of three sites: two exposed to management practices in different years - 2005 (site M05B) and 2015 (site M15B) - and one that did not undergo any management (NMB) and to compare their properties with those recorded in a plot (Control) unaffected by the 2015 wildfire. We analyzed aggregate stability (AS), soil organic matter (SOM) content, total nitrogen (TN), carbon/nitrogen ratio (C/N), inorganic carbon (IC), pH, electrical conductivity (EC), extractable calcium (Ca), magnesium (Mg), sodium (Na), and potassium (K), microbial biomass carbon (C mic ) and basal soil respiration (BSR). In the managed plots, a clear-cutting operation was conducted, whereby part of the vegetation was cut and left covering the soil surface. The AS values recorded at the Control site were significantly higher than those recorded at M05B, whereas the TN and SOM values at NMB were significantly higher than those recorded at M05B. IC was significantly higher at M05B than at the other plots. There were no significant differences in C/N ratio between the analyzed sites. Soil pH at M05B was significantly higher than the value recorded at the Control plot. Extractable Ca was significantly higher at NMB than at both M05B and the Control, while extractable Mg was significantly lower at M05B than at NMB. Extractable K was significantly lower at the Control than at the three fire-affected plots. C mic was significantly higher at NMB than at the Control. BSR, BSR/C and BSR/C mic values at the fire-affected sites were significantly lower than those recorded at the Control. No significant differences were identified in C mic /C. Overall, a comparison of the

  6. Establishing the cut-off score for remission and severity-ranges on the Psychotic Depression Assessment Scale (PDAS)

    DEFF Research Database (Denmark)

    Østergaard, Søren D; Rothschild, Anthony J; Flint, Alastair J

    2016-01-01

    BACKGROUND: The Psychotic Depression Assessment Scale (PDAS) is a rating scale dedicated to the measurement of severity in psychotic depression (PD). The aim of this study was to establish the PDAS cut-off for remission of PD as well as PDAS score-ranges for mild, moderate, and severe PD...... on the PDAS and the severity-ranges for mild, moderate, and severe PD were defined using the Clinical Global Impression - Severity scale (CGI-S) as reference by means of pair-wise receiver operating characteristic (ROC) analyses. Subsequently, it was tested whether remission on the PDAS could separate...... the effects of Olanzapine+Sertraline vs. Olanzapine+Placebo through an intention-to-treat, mixed-effects logistic regression of the data from STOP-PD. RESULTS: According to the ROC analyses, the ideal cut-off for remission of PD was a PDAS total score moderate...

  7. The annual ammonia budget of fertilised cut grassland – Part 1: Micrometeorological flux measurements and emissions after slurry application

    Directory of Open Access Journals (Sweden)

    C. Spirig

    2010-02-01

    Full Text Available Two commercial ammonia (NH3 analysers were customised to allow continuous measurements of vertical concentration gradients. The gradients were used to derive ammonia exchange fluxes above a managed grassland site at Oensingen (Switzerland by application of the aerodynamic gradient method. The measurements from July 2006 to October 2007 covered five complete growth-cut cycles and included six applications of liquid cattle slurry. The average accuracy of the flux measurements during unstable and near-neutral conditions was 20% and the detection limit was 10 ng NH3 m−2 s−1. Hence the flux measurements are considered sufficiently accurate for studying typical NH3 deposition rates over growing vegetation. Quantifying the overall emissions after slurry applications required the application of elaborate interpolations because of difficulties capturing the initial emissions during broadspreading of liquid manure. The emissions were also calculated with a mass balance method yielding similar fluxes. NH3 losses after slurry application expressed as percentage of emitted nitrogen versus applied total ammoniacal nitrogen (TAN varied between 4 and 19%, which is roughly a factor of three lower than the values for broadspreading of liquid manure in emission inventories. The comparatively low emission factors appear to be a consequence of the low dry matter content of the applied slurry and soil properties favouring ammonium adsorption.

  8. Alternative rooting induction of semi-hardwood olive cuttings by several auxin-producing bacteria for organic agriculture systems

    Directory of Open Access Journals (Sweden)

    M. C. Montero-Calasanz

    2013-01-01

    Full Text Available Southern Spain is the largest olive oil producer region in the world. In recent years organic agriculture systems have grown exponentially so that new alternative systems to produce organic olive cuttings are needed. Several bacterial isolates, namely Pantoea sp. AG9, Chryseobacterium sp. AG13, Chryseobacterium sp. CT348, Pseudomonas sp. CT364 and Azospirillum brasilense Cd (ATCC 29729, have been used to induce rooting in olive semi-hardwood cuttings of Arbequina, Hojiblanca and Picual cultivars of olive (Olea europea L. The first four strains were previously selected as auxin-producing bacteria and by their ability to promote rooting in model plants. They have been classified on the basis of their 16S rDNA gene sequence. The known auxin producer A. brasilense Cd strain has been used as a reference. The inoculation of olive cuttings was performed in two different ways: (i by dipping cuttings in a liquid bacterial culture or (ii by immersing them in a paste made of solid bacterial inoculant and sterile water. Under nursery conditions all of the tested bacterial strains were able to induce the rooting of olive cuttings to a similar or greater extent than the control cuttings treated with indole-3-butyric acid (IBA. The olive cultivars responded differently depending on the bacterial strain and the inoculation method. The strain that consistently gave the best results was Pantoea sp. AG9, the only one of the tested bacterial strains to express the enzyme 1-aminocyclopropane-1-carboxylate (ACC deaminase. The results are also discussed in terms of potential commercial interest and nursery feasibility performance of these strains.

  9. Budgeting Time to Teach about the School Budget

    Science.gov (United States)

    Weiss, Dale

    2011-01-01

    As a teacher in the Milwaukee Public Schools (MPS) for the past 16 years, the author has grown used to dismal budget cut news arriving each February. Although cuts are always frustrating and their results burdensome, the school has been able to "hang on" reasonably well. This year, however, the budget cuts were extreme. In this article,…

  10. The impact of economic downturns and budget cuts on homelessness claim rates across 323 local authorities in England, 2004-12.

    Science.gov (United States)

    Loopstra, Rachel; Reeves, Aaron; Barr, Ben; Taylor-Robinson, David; McKee, Martin; Stuckler, David

    2016-09-01

    It is unclear why rates of homelessness claims in England have risen since 2010. We used variations in rates across local authorities to test the impact of economic downturns and budget cuts. Using cross-area fixed effects models of data from 323 UK local authorities between 2004 and 2012, we evaluated associations of changes in statutory homelessness rates with economic activity (Gross Value Added per capita), unemployment, and local and central government expenditure. Each 10% fall in economic activity was associated with an increase of 0.45 homelessness claims per 1000 households (95% CI: 0.10-0.80). Increasing rates of homelessness were also strongly linked with government reductions in welfare spending. Disaggregating types of welfare expenditure, we found that strongest associations with reduced homelessness claims were spending on social care, housing services, discretionary housing payments and income support for older persons. Recession and austerity measures are associated with significant increases in rates of homelessness assistance. These findings likely understate the full burden of homelessness as they only capture those who seek aid. Future research is needed to investigate what is happening to vulnerable groups who may not obtain assistance, including those with mental health problems and rough sleepers. © The Author 2015. Published by Oxford University Press on behalf of Faculty of Public Health.

  11. Brazil's Petrobras chops 1992 capital budget

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that Brazil's state owned Petroleos Brasileiro SA has slashed its 1992 capital budget by more than half for lack of adequate cash flow. Petrobras Pres. Benedicto Moreira last week disclosed the cut, to $1.4 billion from $2.9 billion earmarked earlier, citing cash flow problems stemming from heavy subsidies for domestic products. Petrobras Association of Engineers (Aepet) disputes the latest amount, claiming without elaboration the state company actually is cutting the current budget to $1 billion. At either level, the severe budget cut bodes ill for Petrobras plans to boost domestic production by a net 300,000 b/d to 1 million b/d by 1995, an ambitious program that calls for outlays of $18 billion

  12. A cost-utility and budget impact analysis of allogeneic hematopoietic stem cell transplantation for severe thalassemic patients in Thailand.

    Science.gov (United States)

    Leelahavarong, Pattara; Chaikledkaew, Usa; Hongeng, Suradej; Kasemsup, Vijj; Lubell, Yoel; Teerawattananon, Yot

    2010-07-16

    Hematopoietic stem cell transplantation (HSCT) is the only curative treatment available to severe thalassemic patients. The treatment, however, is very costly, particularly in the context of low and middle income countries, and no studies have been carried out to explore its economic justifiability. This study aimed to estimate the cost-utility of HSCT compared with blood transfusions combined with iron chelating therapy (BT-ICT) for severe thalassemia in Thailand, and to investigate the affordability of HSCT using a budget impact analysis. A Markov model was used to estimate the relevant costs and health outcomes over the patients' lifetimes taking a societal perspective as recommended by Thailand's health technology assessment guidelines. All future costs and outcomes were discounted at a rate of 3% per annum. Primary outcomes of interest were lifetime costs, quality adjusted life years (QALYs) gained, and the incremental cost-effectiveness ratio (ICER) in Thai baht (THB) per QALY gained. Compared to BT-ICT, the incremental cost-effectiveness ratio increased with patient age from 80,700 to 183,000 THB per QALY gained for related HSCT and 209,000 to 953,000 THB per QALY gained for unrelated HSCT among patients aged 1 to 15 years (US$1= 34 THB). The governmental budget impact analysis showed that providing 200 related HSCT to patients aged 1 to 10 years, in accordance with the current infrastructure limitations, would initially require approximately 90 million additional THB per year. At a societal willingness to pay of 100,000 THB per QALY gained, related HSCT was likely to be a cost-effective and affordable treatment for young children with severe thalassemia in Thailand.

  13. FY 1996 Congressional budget request: Budget highlights

    Energy Technology Data Exchange (ETDEWEB)

    1995-02-01

    The FY 1996 budget presentation is organized by the Department`s major business lines. An accompanying chart displays the request for new budget authority. The report compares the budget request for FY 1996 with the appropriated FY 1995 funding levels displayed on a comparable basis. The FY 1996 budget represents the first year of a five year plan in which the Department will reduce its spending by $15.8 billion in budget authority and by $14.1 billion in outlays. FY 1996 is a transition year as the Department embarks on its multiyear effort to do more with less. The Budget Highlights are presented by business line; however, the fifth business line, Economic Productivity, which is described in the Policy Overview section, cuts across multiple organizational missions, funding levels and activities and is therefore included in the discussion of the other four business lines.

  14. Budgeting for Efficiency and Effectiveness

    Science.gov (United States)

    Pereus, Steven C.

    2012-01-01

    For most districts, budgeting has become a cost-cutting exercise designed to close the gap between revenues and expenses. During this process, decision makers inherently assume that existing operations are efficient and effective--an assumption that is rarely validated by facts. Cutting programs and services balances budgets but does not…

  15. Budgeting Approaches in Community Colleges

    Science.gov (United States)

    Palmer, James C.

    2014-01-01

    Several budgeting approaches have been initiated as alternatives to the traditional, incremental process. These include formula budgeting; zero-base budgeting; planning, programming, and budgeting systems; and responsibility center budgeting. Each is premised on assumptions about how organizations might best make resource allocation decisions.…

  16. US science spared budget axe

    Science.gov (United States)

    Gwynne, Peter

    2017-06-01

    Despite initial fears of significant funding cuts, America’s 2017 budget largely maintains support for research. But as Peter Gwynne reports, the relief may only be temporary and funding for science may be slashed next year instead

  17. Budget Options

    National Research Council Canada - National Science Library

    2000-01-01

    This volume-part of the Congressional Budget Office's (CBO's) annual report to the House and Senate Committees on the Budget-is intended to help inform policymakers about options for the federal budget...

  18. Budget Pressures Churn Workforce

    Science.gov (United States)

    Cavanagh, Sean

    2011-01-01

    When the budget-cutting ended this year in one rural North Texas school district, the people-moving began. Forced to chop its total staff to 55 employees from 64, the Perrin-Whitt Consolidated Independent school system went the route of many districts across the country: It made the majority of its reductions by encouraging early retirements and…

  19. Budget impact of continuous subcutaneous insulin infusion therapy in patients with type 1 diabetes who experience severe recurrent hypoglycemic episodes in Spain.

    Science.gov (United States)

    Giménez, Marga; Elías, Isabel; Álvarez, María; Quirós, Carmen; Conget, Ignacio

    Hypoglycemia is one of the most common complications to achieve a good metabolic control, and has been listed by several scientific associations as a common indication to start treatment with continuous subcutaneous insulin infusion (CSII). Use of CSII is still residual in Spain as compared to neighbouring countries, and cost of acquisition cost is one of the main reasons. This study estimates the budget impact of treatment with CSII, as compared to multiple daily insulin injections, of patients with type 1 diabetes mellitus who experience recurrent severe hypoglycemia episodes from the National Healthcare System perspective. Budget impact was based on a retrospective, observational study evaluating the efficacy of CSII in patients with type 1 diabetes mellitus conducted at Hospital Clínic i Universitari in Barcelona, where one of the main indications for switching to CSII were recurrent severe hypoglycemia episodes. The mean number of annual episodes was 1.33 in the two years prior to CSII start and 0.08 in the last two years of follow up (p=0.003). Costs of treatment and major hypoglycemic events over a four-year period were considered. Costs were taken from different Spanish data sources and expressed in € of 2016. Treatment with CSII increased costs by €9,509 per patient as compared to multiple daily insulin injections (€11,902-€2,393). Cost associated to severe hypoglycemic events decreased by €19,330 per patient treated with CSIII (€1,371-€20,701). Results suggest mean total savings of €9,821 per patient during the four-year study period. The higher costs associated to CSII therapy may be totally offset by the severe hypoglycemic events prevented. Copyright © 2017 SEEN y SED. Publicado por Elsevier España, S.L.U. All rights reserved.

  20. Assessment of the GHG budget mitigation potential of intercrops: analysis on several trials and intercrops species in the Southwest of France.

    Science.gov (United States)

    Ferlicoq, M.; Ceschia, E.; Brut, A.; VandeWalle, A.

    2012-04-01

    To reduce organic carbon loss from the soil and nitrate leaching to groundwater, the European directives have promoted Good Agricultural Practices (GAP), such as the use of intercrops (IC). As shown by Béziat et al. 2009, Ceschia et al. 2010, the IC (or voluntary regrowth from the previous crop) limit net CO2 release from the ecosystem or even contribute to carbon storage during their development. However, the seeding and destruction of IC can be difficult on soil with high clay content, especially when soil is wet, and they must be destroyed early enough so that the nitrogen they contain can be released in the soil and used by the following crops. For these reasons, the Midi-Pyrenees Agriculture Department obtained a 2-year temporary derogation to test the implementation of several nitrates catch crops (mustard, diploïd oat, black oat, oat/vetch, oat/phacelia) on clay soils in order to evaluate the best management practices for growing and destroying them. Their impact on the next crop development was also analysed. In this study, the CESBIO helped the Midi-Pyrénées Agriculture Department to 1) calculate a carbon budget for the different trials and 2) to estimate GHG budgets for those trials by using a life cycle analysis (LCA) approach. Emissions associated to Field Operations (FO) were estimated based on study by Ceschia et al. (2010). During long periods of bare soil, the net CO2 flux is reduced to heterotrophic respiration. Since this component of NEE is not measured on the IC sites, it has been estimated using data from a GHG-Europe instrumented site in the same region, the same year and on similar soils (Auradé site, Gers). Heterotrophic respiration was estimated to range between 96.4 and 131 g eq-C m-2 during the IC cycle that lasted between 65 and 89 days. At the end of the IC period, biomass was (in g eq-C) 0.77, 0.18, 9.89, 0.42, 0.48 for mustard, diploïd oat, black oat, oat/vetch, oat/phacelia respectively. The low amount of biomass is explained

  1. Individualised distal femoral cut improves femoral component placement and limb alignment during total knee replacement in knees with moderate and severe varus deformity.

    Science.gov (United States)

    Palanisami, Dhanasekararaja; Iyyampillai, Geethan; Shanmugam, Sivaraj; Natesan, Rajkumar; S, Rajasekaran

    2016-10-01

    Our aim was to determine the variation in valgus correction angle and the influence of individualised distal femoral cut on femoral component placement and limb alignment during total knee replacement (TKR) in knees with varus deformity. The study was done prospectively in two stages. In the first stage, the valgus correction angle (VCA) was calculated in long-limb radiographs of 227 patients and correlated with pre-operative parameters of femoral bowing, neck-shaft angle and hip-knee-ankle angle. In the second part comprising of 240 knees with varus deformity, 140 (group 1) had the distal femoral cut individualised according to the calculated VCA, while the remaining 100 knees (group 1) were operated with a fixed distal femoral cut of 5°. The outcome of surgery was studied by grouping the knees as varus 15°. Of the 227 limbs analysed in stage I, 70 knees (31 %) had a VCA angle outside 5-7°. Coronal bowing (p shaft angle (p alignment when VCA was individualised in the groups of knees with varus 10-15° (p 0.002) and varus >15° (p 0.002). Valgus correction angle is highly variable and is influenced by femoral bowing, neck-shaft angle and pre-operative deformity. Individualisation of VCA is preferable in patients with moderate and severe varus deformity. Level 2.

  2. Late Budgets

    DEFF Research Database (Denmark)

    Andersen, Asger Lau; Lassen, David Dreyer; Nielsen, Lasse Holbøll Westh

    are negative rather than positive; and when there is divided government. We test the hypotheses of the model using a unique data set of late budgets for US state governments, based on dates of budget approval collected from news reports and a survey of state budget o¢ cers for the period 1988...

  3. Five countries pioneering accrual budgeting and accounting in central government

    NARCIS (Netherlands)

    Dees, M.; Neelissen, P.A.

    2004-01-01

    In its 2001 Budget Memorandum, the Dutch government announced that accrual budgeting and accounting would replace the current obligation-cash budgeting and accounting system in ministerial budgets and accounts in several years’ time.

  4. Comparing the effects of different land management strategies across several land types on California's landscape carbon and associated greenhouse gas budgets

    Science.gov (United States)

    Di Vittorio, A. V.; Simmonds, M.; Nico, P. S.

    2017-12-01

    Land-based carbon sequestration and GreenHouse Gas (GHG) reduction strategies are often implemented in small patches and evaluated independently from each other, which poses several challenges to determining their potential benefits at the regional scales at which carbon/GHG targets are defined. These challenges include inconsistent methods, uncertain scalability to larger areas, and lack of constraints such as land ownership and competition among multiple strategies. To address such challenges we have developed an integrated carbon and GHG budget model of California's entire landscape, delineated by geographic region, land type, and ownership. This empirical model has annual time steps and includes net ecosystem carbon exchange, wildfire, multiple forest management practices including wood and bioenergy production, cropland and rangeland soil management, various land type restoration activities, and land cover change. While the absolute estimates vary considerably due to uncertainties in initial carbon densities and ecosystem carbon exchange rates, the estimated effects of particular management activities with respect to baseline are robust across these uncertainties. Uncertainty in land use/cover change data is also critical, as different rates of shrubland to grassland conversion can switch the system from a carbon source to a sink. The results indicate that reducing urban area expansion has substantial and consistent benefits, while the effects of direct land management practices vary and depend largely on the available management area. Increasing forest fuel reduction extent over the baseline contributes to annual GHG costs during increased management, and annual benefits after increased management ceases. Cumulatively, it could take decades to recover the cost of 14 years of increased fuel reduction. However, forest carbon losses can be completely offset within 20 years through increases in urban forest fraction and marsh restoration. Additionally, highly

  5. Zero based programming: a viable security budgeting approach.

    Science.gov (United States)

    Roll, Frederick G

    2003-01-01

    To get additional dollars or avoid budget cuts or personnel reductions, healthcare security directors should consider a budget approach that best justifies the needs of the department or organization.

  6. Effects of budget constraints on conservation network design for biodiversity and ecosystem services

    NARCIS (Netherlands)

    Remme, Roy P.; Schröter, Matthias

    2016-01-01

    Limited budgets and budget cuts hamper the development of effective biodiversity conservation networks. Optimizing the spatial configuration of conservation networks given such budget constraints remains challenging. Systematic conservation planning addresses this challenge. Systematic

  7. Effectiveness and safety of endoscopic radial incision and cutting for severe benign anastomotic stenosis after surgery for colorectal carcinoma: a three-case series.

    Science.gov (United States)

    Asayama, Naoki; Nagata, Shinji; Shigita, Kenjiro; Aoyama, Taiki; Fukumoto, Akira; Mukai, Shinichi

    2018-03-01

    Benign colonic anastomotic stenosis sometimes occurs after surgical resection and usually requires surgical or endoscopic dilation. Limited data are available on the effectiveness and safety of the endoscopic radial incision and cutting (RIC) method at sites other than the esophagus. The aim of this retrospective study was to investigate the effectiveness and safety of RIC dilation for severe benign anastomotic colonic stenosis. Subjects were 3 men (median age 72 years, range 65 - 76 years) who developed severe benign anastomotic stenosis after surgical resection for colorectal carcinoma and were subsequently treated by RIC dilation at Hiroshima City Asa Citizens Hospital between May 2014 and December 2016. Severe anastomotic stenosis was defined as a narrowed anastomosis through which a standard colonoscope could not be passed. The median interval from surgery to RIC was 21 months (range 9 - 29 months). RIC was successful in all 3 patients and reduced the severity of dyschezia postoperatively; 2 patients experienced improvement after a single RIC session and the other after 6 RIC sessions. No treatment-related adverse events or re-stenosis requiring repeat dilation was noted during a median follow-up of 27 months (range 8 - 37 months). Our findings indicate that the RIC technique can be applied safely and effectively to various sites in the colon, avoiding the need for reoperation.

  8. Determination of moderate-to-severe postoperative pain on the numeric rating scale: a cut-off point analysis applying four different methods.

    Science.gov (United States)

    Gerbershagen, H J; Rothaug, J; Kalkman, C J; Meissner, W

    2011-10-01

    Cut-off points (CPs) of the numeric rating scale (NRS 0-10) are regularly used in postoperative pain treatment. However, there is insufficient evidence to identify the optimal CP between mild and moderate pain. A total of 435 patients undergoing general, trauma, or oral and maxillofacial surgery were studied. To determine the optimal CP for pain treatment, four approaches were used: first, patients estimated their tolerable postoperative pain intensity before operation; secondly, 24 h after surgery, they indicated if they would have preferred to receive more analgesics; thirdly, satisfaction with pain treatment was analysed, and fourthly, multivariate analysis was used to calculate the optimal CP for pain intensities in relation to pain-related interference with movement, breathing, sleep, and mood. The estimated tolerable postoperative pain before operation was median (range) NRS 4.0 (0-10). Patients who would have liked more analgesics reported significantly higher average pain since surgery [median NRS 5.0 (0-9)] compared with those without this request [NRS 3.0 (0-8)]. Patients satisfied with pain treatment reported an average pain intensity of median NRS 3.0 (0-8) compared with less satisfied patients with NRS 5.0 (2-9). Analysis of average postoperative pain in relation to pain-related interference with mood and activity indicated pain categories of NRS 0-2, mild; 3-4, moderate; and 5-10, severe pain. Three of the four methods identified a treatment threshold of average pain of NRS≥4. This was considered to identify patients with pain of moderate-to-severe intensity. This cut-off was indentified as the tolerable pain threshold.

  9. System Budgets

    DEFF Research Database (Denmark)

    Jeppesen, Palle

    1996-01-01

    The lecture note is aimed at introducing system budgets for optical communication systems. It treats optical fiber communication systems (six generations), system design, bandwidth effects, other system impairments and optical amplifiers.......The lecture note is aimed at introducing system budgets for optical communication systems. It treats optical fiber communication systems (six generations), system design, bandwidth effects, other system impairments and optical amplifiers....

  10. DCS Budget Tracking System

    Data.gov (United States)

    Social Security Administration — DCS Budget Tracking System database contains budget information for the Information Technology budget and the 'Other Objects' budget. This data allows for monitoring...

  11. Budget impact model in moderate-to-severe psoriasis vulgaris assessing effects of calcipotriene and betamethasone dipropionate foam on per-patient standard of care costs.

    Science.gov (United States)

    Asche, Carl V; Kim, Minchul; Feldman, Steven R; Zografos, Panagiotis; Lu, Minyi

    2017-09-01

    To develop a budget impact model (BIM) for estimating the financial impact of formulary adoption and uptake of calcipotriene and betamethasone dipropionate (C/BD) foam (0.005%/0.064%) on the costs of biologics for treating moderate-to-severe psoriasis vulgaris in a hypothetical US healthcare plan with 1 million members. This BIM incorporated epidemiologic data, market uptake assumptions, and drug utilization costs, simulating the treatment mix for patients who are candidates for biologics before (Scenario #1) and after (Scenario #2) the introduction of C/BD foam. Predicted outcomes were expressed in terms of the annual cost of treatment (COT) and the COT per member per month (PMPM). At year 1, C/BD foam had the lowest per-patient cost ($9,913) necessary to achieve a Psoriasis Area and Severity Index (PASI)-75 response compared with etanercept ($73,773), adalimumab ($92,871), infliximab ($34,048), ustekinumab ($83,975), secukinumab ($113,858), apremilast ($47,960), and ixekizumab ($62,707). Following addition of C/BD foam to the formulary, the annual COT for moderate-to-severe psoriasis would decrease by $36,112,572 (17.91%, from $201,621,219 to $165,508,647). The COT PMPM is expected to decrease by $3.00 (17.86%, from $16.80 to $13.80). Drug costs were based on Medi-Span reference pricing (January 21, 2016); differences in treatment costs for drug administration, laboratory monitoring, or adverse events were not accounted for. Potentially confounding were the definition of "moderate-to-severe" and the heterogeneous efficacy data. The per-patient cost for PASI-75 response at year 1 was estimated from short-term efficacy data for C/BD foam and apremilast only. The introduction of C/BD foam is expected to decrease the annual COT for moderate-to-severe psoriasis treatable with biologics by $36,112,572 for a hypothetical US healthcare plan with 1 million plan members, and to lower the COT PMPM by $3.00.

  12. Use of Oritavancin in Moderate-to-Severe ABSSSI Patients Requiring IV Antibiotics: A U.S. Payer Budget Impact Analysis.

    Science.gov (United States)

    Jensen, Ivar S; Wu, Elizabeth; Fan, Weihong; Lodise, Thomas P; Nicolau, David P; Dufour, Scott; Cyr, Philip L; Sulham, Katherine A

    2016-06-01

    It is estimated that acute bacterial skin and skin structure infections (ABSSSI) account for nearly 10% of hospital admissions and 3.4-3.8 million emergency department visits per year in the United States. Analyses of hospital discharge records indicate 74% of ABSSSI admissions involve empiric treatment with methicillin-resistant Staphylococcus aureus (MRSA) active antibiotics. Analysis has shown that payer costs could be reduced if moderate-to-severe ABSSSI patients were treated to a greater extent in the observational unit followed by discharge to outpatient parenteral antibiotic therapy (OPAT). Oritavancin is a lipoglycopeptide antibiotic with bactericidal activity against gram-positive bacteria, including MRSA. To estimate the impact on a U.S. payer's budget of using single-dose oritavancin in ABSSSI patients with suspected MRSA involvement who are indicated for intravenous antibiotics. A decision analytic model based on current clinical practice was developed to estimate the economic value of decreased hospital resource consumption by using single-dose oritavancin over a 1-year time horizon. Use of antibiotics was informed by an analysis of the Premier Research Database. Demographic and clinical data were derived from a targeted literature review. Emergency department, observation, laboratory, and administration costs used were Medicare National Limitation amounts. Drug costs were 2014 wholesale acquisition costs. For a hypothetical U.S. payer with 1,000,000 members, it is expected that approximately 14,285 members per year will be diagnosed with ABSSSI severe enough to indicate intravenous antibiotics with MRSA activity. Based on this simulation, use of single-dose oritavancin in 26% of these patients was estimated to reduce the number of inpatient admissions, reduce length of stay for patients requiring admission, and reduce the number of days a patient needs to receive daily infusions in the OPAT clinic. The total patient days decreased from 171,125 to 133

  13. 10 Budget-Savvy Content Management Strategies

    Science.gov (United States)

    Hillis, David J.

    2004-01-01

    Facing an overall budget reduction of 10 percent, most colleges or universities would postpone investing in a Web content management system. However, for California State University Monterey Bay (CSUMB), a large budget cut made Web content management even more important. CSUMB found an innovative way to purchase and implement a new Content…

  14. CAUT Analysis of Federal Budget 2013

    Science.gov (United States)

    Canadian Association of University Teachers, 2013

    2013-01-01

    The 2013 federal Budget was delivered ironically the same day as the Parliamentary Budget Officer was in court seeking more information about the impact of the government's $5.2 billion in spending cuts announced last year. The lack of budgetary transparency and accountability has become a hallmark of the Conservative government. Anyone expecting…

  15. Budget Options

    National Research Council Canada - National Science Library

    2001-01-01

    ... (including the off-budget Social Security trust funds) to $281 billion. That surplus would be the largest in history in nominal dollars and the largest since 1948 as a percentage of gross domestic product (GDP...

  16. NCTN Budget

    Science.gov (United States)

    Learn about the budget for the National Clinical Trials Network (NCTN), a National Cancer Institute program that gives funds and other support to cancer research organizations to conduct cancer clinical trials.

  17. BEYOND BUDGETING

    Directory of Open Access Journals (Sweden)

    Edo Cvrkalj

    2015-12-01

    Full Text Available Traditional budgeting principles, with strictly defined business goals, have been, since 1998, slowly growing into more sophisticated and organization-adjusted alternative budgeting concepts. One of those alternative concepts is the “Beyond budgeting” model with an implemented performance effects measuring process. In order for the model to be practicable, budget planning and control has to be reoriented to the “bottom up” planning and control approach. In today’s modern business surroundings one has to take both present and future opportunities and threats into consideration, by valorizing them in a budget which would allow a company to realize a whole pallet of advantages over the traditional budgeting principles which are presented later in the article. It is essential to emphasize the importance of successfully implementing the new budgeting principles within an organization. If the implementation has been lacking and done without a higher goal in mind, it is easily possible that the process has been implemented without coordination, planning and control framework within the organization itself. Further in the article we present an overview of managerial techniques and instruments within the “Beyond budgeting” model such as balanced scorecard, rolling forecast, dashboard, KPI and other supporting instruments. Lastly we define seven steps for implementing the “Beyond budgeting” model and offer a comparison of “Beyond budgeting” model against traditional budgeting principles which lists twelve reasons why “Beyond budgeting” is better suited to modern and market-oriented organizations. Each company faces those challenges in their own characteristic way but implementing new dynamic planning models will soon become essential for surviving in the market.

  18. The Cutting-Edge Challenge

    Science.gov (United States)

    Share, Joani

    2005-01-01

    In a time of educational budget cuts, the arts seem to take the major brunt of the financial ax. Fine arts programs are often pitted against one another for survival. The music industry and supporting corporations, such as American Express, campaign to have instruments donated or purchased to keep educational programs alive. The visual arts do not…

  19. Cutting cleaner

    International Nuclear Information System (INIS)

    Elsen, R.P.H. van; Smits, M.

    1991-01-01

    This paper presents the results of a long term field test of the Cutting Cleaner, which is used for the treatment of wet oil contaminated cuttings (WOCC) produced when drilling with Oil Based Mud (OBM). It was concluded that it is possible to reduce the oil content of cuttings to an average of 1 - 2%. The recovered base oil can be reused to make new oil based mud

  20. Paper Cuts.

    Science.gov (United States)

    Greene, Lisa A.

    1990-01-01

    Describes how to create paper cuts and suggests the most appropriate materials for young children that give good quality results. Describes the methods the author, a professional artist, uses to assemble her own paper cuts and how these can be adopted by older students. (KM)

  1. Accelerator plans stalled after US and UK cuts

    CERN Multimedia

    2008-01-01

    Budget woes spell trouble for . Eric Hand & Geoff Brumfiel Budget hole: the would be built from superconducting cavities.FERMILABThe machine on which the world's particle physicists have staked the future of their discipline hangs in the balance owing to budget cuts.

  2. CDO budgeting

    Science.gov (United States)

    Nesladek, Pavel; Wiswesser, Andreas; Sass, Björn; Mauermann, Sebastian

    2008-04-01

    The Critical dimension off-target (CDO) is a key parameter for mask house customer, affecting directly the performance of the mask. The CDO is the difference between the feature size target and the measured feature size. The change of CD during the process is either compensated within the process or by data correction. These compensation methods are commonly called process bias and data bias, respectively. The difference between data bias and process bias in manufacturing results in systematic CDO error, however, this systematic error does not take into account the instability of the process bias. This instability is a result of minor variations - instabilities of manufacturing processes and changes in materials and/or logistics. Using several masks the CDO of the manufacturing line can be estimated. For systematic investigation of the unit process contribution to CDO and analysis of the factors influencing the CDO contributors, a solid understanding of each unit process and huge number of masks is necessary. Rough identification of contributing processes and splitting of the final CDO variation between processes can be done with approx. 50 masks with identical design, material and process. Such amount of data allows us to identify the main contributors and estimate the effect of them by means of Analysis of variance (ANOVA) combined with multivariate analysis. The analysis does not provide information about the root cause of the variation within the particular unit process, however, it provides a good estimate of the impact of the process on the stability of the manufacturing line. Additionally this analysis can be used to identify possible interaction between processes, which cannot be investigated if only single processes are considered. Goal of this work is to evaluate limits for CDO budgeting models given by the precision and the number of measurements as well as partitioning the variation within the manufacturing process. The CDO variation splits according to

  3. Cut-Off Points for Mild, Moderate, and Severe Pain on the Numeric Rating Scale for Pain in Patients with Chronic Musculoskeletal Pain: Variability and Influence of Sex and Catastrophizing

    NARCIS (Netherlands)

    Boonstra, A.M.; Stewart, R.; Koke, A.J.A.; Oosterwijk, R.F.A.; Swaan, J.L.; Schreurs, Karlein Maria Gertrudis; Schiphorst Preuper, H.R.

    2016-01-01

    Objectives: The 0–10 Numeric Rating Scale (NRS) is often used in pain management. The aims of our study were to determine the cut-off points for mild, moderate, and severe pain in terms of pain-related interference with functioning in patients with chronic musculoskeletal pain, to measure the

  4. Cut-Off Points for Mild, Moderate, and Severe Pain on the Numeric Rating Scale for Pain in Patients with Chronic Musculoskeletal Pain : Variability and Influence of Sex and Catastrophizing

    NARCIS (Netherlands)

    Boonstra, Anne M; Stewart, Roy E; Köke, Albère J A; Oosterwijk, René F A; Swaan, Jeannette L; Schreurs, Karlein M G; Schiphorst Preuper, Henrica R

    2016-01-01

    Objectives: The 0-10 Numeric Rating Scale (NRS) is often used in pain management. The aims of our study were to determine the cut-off points for mild, moderate, and severe pain in terms of pain-related interference with functioning in patients with chronic musculoskeletal pain, to measure the

  5. Wet cutting

    Energy Technology Data Exchange (ETDEWEB)

    Hole, B. [IMC Technical Services (United Kingdom)

    1999-08-01

    Continuous miners create dust and methane problems in underground coal mining. Control has usually been achieved using ventilation techniques as experiments with water based suppression have led to flooding and electrical problems. Recent experience in the US has led to renewed interest in wet head systems. This paper describes tests of the Hydraphase system by IMC Technologies. Ventilation around the cutting zone, quenching of hot ignition sources, dust suppression, the surface trial gallery tests, the performance of the cutting bed, and flow of air and methane around the cutting head are reviewed. 1 ref., 2 figs., 2 photos.

  6. Cutting assembly

    Science.gov (United States)

    Racki, Daniel J.; Swenson, Clark E.; Bencloski, William A.; Wineman, Arthur L.

    1984-01-01

    A cutting apparatus includes a support table mounted for movement toward and away from a workpiece and carrying a mirror which directs a cutting laser beam onto the workpiece. A carrier is rotatably and pivotally mounted on the support table between the mirror and workpiece and supports a conduit discharging gas toward the point of impingement of the laser beam on the workpiece. Means are provided for rotating the carrier relative to the support table to place the gas discharging conduit in the proper positions for cuts made in different directions on the workpiece.

  7. Core Cutting Test with Vertical Rock Cutting Rig (VRCR)

    Science.gov (United States)

    Yasar, Serdar; Osman Yilmaz, Ali

    2017-12-01

    Roadheaders are frequently used machines in mining and tunnelling, and performance prediction of roadheaders is important for project economics and stability. Several methods were proposed so far for this purpose and, rock cutting tests are the best choice. Rock cutting tests are generally divided into two groups which are namely, full scale rock cutting tests and small scale rock cutting tests. These two tests have some superiorities and deficiencies over themselves. However, in many cases, where rock sampling becomes problematic, small scale rock cutting test (core cutting test) is preferred for performance prediction, since small block samples and core samples can be conducted to rock cutting testing. Common problem for rock cutting tests are that they can be found in very limited research centres. In this study, a new mobile rock cutting testing equipment, vertical rock cutting rig (VRCR) was introduced. Standard testing procedure was conducted on seven rock samples which were the part of a former study on cutting rocks with another small scale rock cutting test. Results showed that core cutting test can be realized successfully with VRCR with the validation of paired samples t-test.

  8. Cut-Off Points for Mild, Moderate, and Severe Pain on the Numeric Rating Scale for Pain in Patients with Chronic Musculoskeletal Pain: Variability and Influence of Sex and Catastrophizing.

    Science.gov (United States)

    Boonstra, Anne M; Stewart, Roy E; Köke, Albère J A; Oosterwijk, René F A; Swaan, Jeannette L; Schreurs, Karlein M G; Schiphorst Preuper, Henrica R

    2016-01-01

    Objectives: The 0-10 Numeric Rating Scale (NRS) is often used in pain management. The aims of our study were to determine the cut-off points for mild, moderate, and severe pain in terms of pain-related interference with functioning in patients with chronic musculoskeletal pain, to measure the variability of the optimal cut-off points, and to determine the influence of patients' catastrophizing and their sex on these cut-off points. Methods: 2854 patients were included. Pain was assessed by the NRS, functioning by the Pain Disability Index (PDI) and catastrophizing by the Pain Catastrophizing Scale (PCS). Cut-off point schemes were tested using ANOVAs with and without using the PSC scores or sex as co-variates and with the interaction between CP scheme and PCS score and sex, respectively. The variability of the optimal cut-off point schemes was quantified using bootstrapping procedure. Results and conclusion: The study showed that NRS scores ≤ 5 correspond to mild, scores of 6-7 to moderate and scores ≥8 to severe pain in terms of pain-related interference with functioning. Bootstrapping analysis identified this optimal NRS cut-off point scheme in 90% of the bootstrapping samples. The interpretation of the NRS is independent of sex, but seems to depend on catastrophizing. In patients with high catastrophizing tendency, the optimal cut-off point scheme equals that for the total study sample, but in patients with a low catastrophizing tendency, NRS scores ≤ 3 correspond to mild, scores of 4-6 to moderate and scores ≥7 to severe pain in terms of interference with functioning. In these optimal cut-off schemes, NRS scores of 4 and 5 correspond to moderate interference with functioning for patients with low catastrophizing tendency and to mild interference for patients with high catastrophizing tendency. Theoretically one would therefore expect that among the patients with NRS scores 4 and 5 there would be a higher average PDI score for those with low

  9. Home - House Budget Committee

    Science.gov (United States)

    Initiatives Hearings Full Menu About Toggle Links Members History Staff Rules & Budget Law News Toggle Links Press Releases Budget Digests HBC Publications Op-Eds Speeches & Statements Budgets Toggle Links FY 2018 Budget FY 2017 Budget FY 2017 Reconciliation FY 2016 Budget FY 2016 Reconciliation FY 2015

  10. Note to Budget Cutters: The Arts Are Good Business--Multiple Studies Point to Arts Education as an Important Economic Engine

    Science.gov (United States)

    Olson, Catherine Applefeld

    2009-01-01

    They say desperate times call for desperate measures. But in this time of economic uncertainty, the desperate cutting of budgets for arts funding and, by extension, all types of arts education, including music, is not prudent. That is the consensus of several national and local studies, which converge on a single point--that the arts actually can…

  11. Cutting Cosmos

    DEFF Research Database (Denmark)

    Mikkelsen, Henrik Hvenegaard

    For the first time in over 30 years, a new ethnographic study emerges on the Bugkalot tribe, more widely known as the Ilongot of the northern Philippines. Exploring the notion of masculinity among the Bugkalot, Cutting Cosmos is not only an experimental, anthropological study of the paradoxes...... around which Bugkalot society revolves, but also a reflection on anthropological theory and writing. Focusing on the transgressive acts through which masculinity is performed, this book explores the idea of the cosmic cut, the ritual act that enables the Bugkalot man to momentarily hold still the chaotic...

  12. Ciclofosfamida: eficaz no tratamento do quadro cutâneo grave da esclerose sistêmica Cyclophosphamide: effective in the treatment of severe cutaneous involvement in systemic sclerosis

    Directory of Open Access Journals (Sweden)

    Patrícia Andrade de Macedo

    2009-06-01

    Full Text Available INTRODUÇÃO: A esclerose sistêmica (ES é uma doença reumatológica caracterizada por inflamação autoimune, vasculopatia e fibrose da pele e de vários órgãos. Poucos tratamentos são considerados eficazes para a doença com intenso envolvimento de pele como a ES na forma difusa. Portanto, avaliamos a eficácia da ciclofosfamida no tratamento de pacientes com ES difusa grave. PACIENTES E MÉTODOS: Nove pacientes com ES difusa (Critérios do Colégio Americano de Reumatologia [ACR] com escore de Rodnan de pele modificado (ERM > 30 (0-51 foram submetidos ao tratamento com ciclofosfamida (CFM EV na dose de 0,5 a 1,0 g/m² mensal por 18 meses, totalizando 18 pulsos. Além da realização do ERM a cada seis meses, exames laboratoriais e avaliação de efeitos adversos foram também analisados. Pacientes com doença pulmonar e envolvimento cardíaco foram excluídos. RESULTADOS: A maioria dos pacientes era do sexo feminino (77%, com média de idade de 41,7 anos e tempo de doença de 2,2 anos. Observou-se redução significativa do ERM de 37,7 ± 4,08 para 29,1 ± 8,13 após 12 meses de tratamento (P = 0,009. Sete pacientes completaram 18 meses de CFM e com redução persistente do ERM (média ERM = 26,4; P = 0,01. Houve também uma redução da proteína C-reativa (PCR (média inicial PCR = 8,9 mg/dL quando comparada com valores após 18 meses de tratamento (média PCR = 3,09 mg/dL; P = 0,04. Não foram observadas infecções, alterações urinárias e/ou quadro hematológico importante durante todo o tratamento. CONCLUSÃO: Nesta amostra de pacientes, o tratamento com a CFM foi eficaz e pode ser considerado como terapia alternativa para pacientes com ES e envolvimento cutâneo grave.INTRODUCTION: Systemic sclerosis (SSc is a rheumatologic disease characterized by autoimmune inflammation, vasculopathy and tissue fibrosis of skin and various organs. There are few effective treatments available for a severe cutaneous involvement of diffuse SSc

  13. Building information modeling in budgeting

    Directory of Open Access Journals (Sweden)

    Strnad, Michal

    2017-12-01

    Full Text Available Construction activity is one of the financially demanding and ever-changing locations of implementation. The basic idea of the budget is to determine all the possible costs that will arise during construction work. The budget must be a transparent and effective way of communication in the context of supplier-customer relationships. For this reason it is essential to give the budget the structure that is now represented by the price system. It is important to adhere to the principles of budgeting and technical standards. It is necessary to have good documentation for budgeting such as project documentation and much more. However, the construction product range is one of the most extensive, the product group can be changed several times in the investment phase not only materially but also cost-effectively because of the longest production cycle in the construction industry.

  14. Reagan's budget slashes geophysics R&D

    Science.gov (United States)

    Richman, Barbara T.

    When President Ronald Reagan outlined to a joint session of Congress his proposed revisions to the Carter fiscal 1982 budget (Eos, February 10, p. 49), Congress responded with 13 bursts of applause and one standing ovation. Geophysicists, however, may not greet the budget pruning with equal fanfare. Reagan's across-the-board cuts include proposals for slashing research and development funds. Among those hardest hit are NASA, NOAA, and NSF.

  15. Cutting Itch

    OpenAIRE

    Zellweger, Christoph

    2015-01-01

    Cutting Itch” is a curatorial project by artists-duo Baltensperger-Siepert. An exhibition project about the essential need of art to be an active system that reflects, investigates social, cultural and political issues. It is about an existential necessity to shape ones environment, to think about relations, regulating structures and about how we can locate ourselves in a more and more globalised world. (from press material). \\ud \\ud Baltensperger & Siepert identified seven artists from Mexi...

  16. Budgeting for School Media Centers.

    Science.gov (United States)

    Drott, M. Carl

    1978-01-01

    Describes various forms of budgets and discusses concepts in budgeting useful to supervisors of school media centers: line item budgets, capital budgets, creating budgets, the budget calendar, innovations, PPBS (Planning, Programing, Budgeting System), zero-based budgeting, cost-benefit analysis, benefits, benefit guidelines, and budgeting for the…

  17. Determining the Budget of Marketing Communication in Big Advertisers

    Directory of Open Access Journals (Sweden)

    Fabiano Palhares Galão

    2015-09-01

    Full Text Available This study aims to analyze the criteria and procedures adopted by companies for determining the budget communication. Specifically, we intend to identify how companies organize the system of deciding the budget and deal with the budget cuts throughout the process of implementation of promotional activities. The data collection involved in-depth interviews conducted with communications professionals from ten companies belonging to the ranking of the 300 largest advertisers in Brazil. As data analysis technique, we have chosen content analysis. The main results showed little or no participation by the communication manager's final decision on the budget area, the lack of criteria to justify budget cuts during the promotional period and the adoption by firms of judgment methods and percentage of sales to determine the budget amount of communication

  18. Automated Budget System -

    Data.gov (United States)

    Department of Transportation — The Automated Budget System (ABS) automates management and planning of the Mike Monroney Aeronautical Center (MMAC) budget by providing enhanced capability to plan,...

  19. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mengjiao Yu; Ramadan Ahmed; Mark Pickell; Len Volk; Lei Zhou; Zhu Chen; Aimee Washington; Crystal Redden

    2003-09-30

    The Quarter began with installing the new drill pipe, hooking up the new hydraulic power unit, completing the pipe rotation system (Task 4 has been completed), and making the SWACO choke operational. Detailed design and procurement work is proceeding on a system to elevate the drill-string section. The prototype Foam Generator Cell has been completed by Temco and delivered. Work is currently underway to calibrate the system. Literature review and preliminary model development for cuttings transportation with polymer foam under EPET conditions are in progress. Preparations for preliminary cuttings transport experiments with polymer foam have been completed. Two nuclear densitometers were re-calibrated. Drill pipe rotation system was tested up to 250 RPM. Water flow tests were conducted while rotating the drill pipe up to 100 RPM. The accuracy of weight measurements for cuttings in the annulus was evaluated. Additional modifications of the cuttings collection system are being considered in order to obtain the desired accurate measurement of cuttings weight in the annular test section. Cutting transport experiments with aerated fluids are being conducted at EPET, and analyses of the collected data are in progress. The printed circuit board is functioning with acceptable noise level to measure cuttings concentration at static condition using ultrasonic method. We were able to conduct several tests using a standard low pass filter to eliminate high frequency noise. We tested to verify that we can distinguish between different depths of sand in a static bed of sand. We tested with water, air and a mix of the two mediums. Major modifications to the DTF have almost been completed. A stop-flow cell is being designed for the DTF, the ACTF and Foam Generator/Viscometer which will allow us to capture bubble images without the need for ultra fast shutter speeds or microsecond flash system.

  20. California Bus Aid Still in Budget Cross Hairs

    Science.gov (United States)

    Fleming, Nora

    2012-01-01

    California legislators swiftly passed a budget bill last week aimed at sheltering school busing dollars from a midyear budget cut many districts and advocates said particularly hurt rural school systems, along with urban districts with desegregation plans. While the measure, which Gov. Jerry Brown was expected to sign into law, would restore $248…

  1. Underwater plasma arc cutting

    International Nuclear Information System (INIS)

    Leautier, R.; Pilot, G.

    1991-01-01

    This report describes the work done to develop underwater plasma arc cutting techniques, to characterise aerosols from cutting operations on radioactive and non-radioactive work-pieces, and to develop suitable ventilation and filtration techniques. The work has been carried out in the framework of a contract between CEA-CEN Cadarache and the Commission of European Communities. Furthermore, this work has been carried out in close cooperation with CEA-CEN Saclay mainly for secondary emissions and radioactive analysis. The contract started in May 1986 and was completed in December 1988 by a supplementary agreement. This report has been compiled from several progress reports submitted during the work period, contains the main findings of the work and encloses the results of comparative tests on plasma arc cutting

  2. PSS32 Impact of dry eye on everyday life (Ideel) - Symptom bother: Estimating cut-off scores for dry eye severity groups

    OpenAIRE

    Acaster, S.; Verboven, Y.; Begley, C.; Chalmers, R.; Abetz, L.; Thompson, T.

    2011-01-01

    The aims of the study were to estimate score ranges associated with dry eye severity based on the Impact of Dry Eye on Everyday Life (IDEEL) Symptom Bother (SB) domain, and to evaluate the overall performance of the SB domain.

  3. California Budget Simulation

    Science.gov (United States)

    Mallinson, Daniel J.

    2018-01-01

    The California Budget Challenge produced by Next10 provides a useful and intuitive tool for instructors to introduce students to public budgeting. Students will reason through a series of budgeting decisions using information provided on the fiscal and practical implications of their choices. The Challenge is updated with each budget cycle, so it…

  4. Plan Your Advertising Budget.

    Science.gov (United States)

    Britt, Steuart-Henderson

    1979-01-01

    Methods for establishing an advertising budget are reviewed. They include methods based on percentage of sales or profits, unit of sales, and objective and task. Also discussed are ways to allocate a promotional budget. The most common breakdowns are: departmental budgets, total budget, calendar periods, media, and sales area. (JMD)

  5. Ulipristal acetate for pre-operative treatment of moderate-to-severe uterine fibroids in women of reproductive age in The Netherlands: cost minimization analysis and budget impact analysis.

    Science.gov (United States)

    Zakiyah, N; van Asselt, A D I; Postma, M J

    2017-03-01

    Ulipristal acetate has been found to be non-inferior to other pre-operative treatments of uterine fibroids, particularly leuprolide. The objective of this study was to assess the pharmacoeconomic profile of ulipristal acetate compared to leuprolide for the pre-operative treatment of moderate-to-severe uterine fibroids in women of reproductive age in The Netherlands. The analysis was performed and applied within the framework of the ulipristal acetate submission for reimbursement in 2012. A decision model was developed to compare the total costs of ulipristal acetate compared to leuprolide, the standard care in The Netherlands. The target population of this study corresponded to the type of patients included in the PEARL II clinical trial; i.e. women of reproductive age requiring pre-operative treatment for uterine fibroids. Sensitivity analysis was implemented to assess uncertainties. Data regarding costs, effects, and other input parameters were obtained from relevant published literatures, the Dutch Healthcare Insurance Board, and expert opinion obtained by means of a panel of experts from several medical centers in The Netherlands. In The Netherlands, the total costs of ulipristal acetate and leuprolide were estimated at €4,216,027 and €4,218,095, respectively. The annual savings of ulipristal acetate were, therefore, estimated at €2,068. The major driver of this cost difference was the cost of administration for leuprolide. Sensitivity analyses showed that ulipristal acetate mostly remained cost-saving over a range of assumptions. The budget impact analysis indicated that the introduction of ulipristal acetate was estimated to result in cost savings in the first 3 years following the introduction. The results of this study were used in the decision on reimbursement of ulipristal acetate according to the Dutch Reference Pricing system in 2012. Ulipristal acetate was cost saving compared to leuprolide and has the potential to provide substantial savings on

  6. USGS budget request up for 1994

    Science.gov (United States)

    White, M. Catherine

    The president's U.S. Geological Survey budget request for fiscal year 1994 totals $598 million—up $20 million from the current budget. This would restore about half of the $42.46 million cut from its budget in fiscal 1993.In releasing the budget, Bruce Babbitt, Secretary of the Department of the Interior, said, “The USGS reflects the new administration's understanding that investing in America requires investing in a strong Earth science capability,” and that “we need high-quality scientific information on natural hazards and on our water, mineral, energy, and land resources to serve as the building blocks for making intelligent decisions and planning future growth.”

  7. G132 Which cut off should we choose? Is severity of motor coordination difficulties related to co-morbidity in children at risk for DCD?

    NARCIS (Netherlands)

    Lingam, R; Schoemaker, M; Jongmans, M; van Heuvelena, M; Emond, A

    2014-01-01

    Aim of the study was to investigate whether children aged 7–9 year old with severe motor difficulties had a greater risk of additional difficulties in activities in daily living (ADL), academic skills, attention and social skills than children with moderate motor difficulties. Methods Children

  8. Cutting to the chase

    International Nuclear Information System (INIS)

    Snieckus, D.

    2001-01-01

    This article reports on the development of the cost effective abrasive cutting Sabre system which came as a result of UWG's work on the decommissioning of the Phillips' Maureen wells and adds to UWG's 'total severance solution' tools. The advantages of the system are highlighted and include the ability to operate from a platform or diving support vessel, to cut internal cases, and to eliminate the use of environmentally damaging explosives and the need to operate from a rig. The new Mark II version of the Sabre designed to work at greater depths of water, the range of the severance tools, UWG's well abandonment hole assembly system, and its aim to enter the Gulf of Mexico market are discussed. Details are given of the decommissioning of the Schwedeneck-See platforms in Kiel Bay off Germany and the Phillips' UK decommissioning plans for the Maureen platform

  9. France cuts its 'big science' spend to bolster lab research

    CERN Document Server

    McCabe, H

    1999-01-01

    French research agencies have been told by minister Allegre to cut FF200 million from their budgets for large scientific facilities to provide additi onal funds for laboratory research. The space agency CNES will absorb half of the cuts but the CNRS, LHC and Ganil will also be affected (1 page).

  10. Tubing and cable cutting tool

    Science.gov (United States)

    Mcsmith, D. D.; Richardson, J. I. (Inventor)

    1984-01-01

    A hand held hydraulic cutting tool was developed which is particularly useful in deactivating ejection seats in military aircraft rescue operations. The tool consists primarily of a hydraulic system composed of a fluid reservoir, a pumping piston, and an actuator piston. Mechanical cutting jaws are attached to the actuator piston rod. The hydraulic system is controlled by a pump handle. As the pump handle is operated the actuator piston rod is forced outward and thus the cutting jaws are forced together. The frame of the device is a flexible metal tubing which permits easy positioning of the tool cutting jaws in remote and normally inaccessible locations. Bifurcated cutting edges ensure removal of a section of the tubing or cable to thereby reduce the possibility of accidental reactivation of the tubing or cable being severed.

  11. Beyond Zero Based Budgeting.

    Science.gov (United States)

    Ogden, Daniel M., Jr.

    1978-01-01

    Suggests that the most practical budgeting system for most managers is a formalized combination of incremental and zero-based analysis because little can be learned about most programs from an annual zero-based budget. (Author/IRT)

  12. Fiscal Year 2015 Budget

    Data.gov (United States)

    Montgomery County of Maryland — This dataset includes the Fiscal Year 2015 Council-approved operating budget for Montgomery County. The dataset does not include revenues and detailed agency budget...

  13. Redwoods, restoration, and implications for carbon budgets

    Science.gov (United States)

    Madej, Mary Ann

    2010-01-01

    The coast redwoods (Sequoia sempervirens) of California have several unique characteristics that influence interactions between vegetation and geomorphic processes. Case studies, using a combination of in-channel wood surveys and an air photo inventory of landslides, illustrate current conditions in a redwood-dominated watershed undergoing restoration work, and the influence of wood loading and landslides on the carbon budget. Redwood trees have extremely large biomass (trunk wood volumes of 700 to 1000 m3) and are very decay-resistant; consequently, they have a large and persistent influence on in-channel wood loading. Large wood surveys indicate high wood loading in streams in uncut forests (0.3-0.5 m3/m2 of channel), but also show that high wood loading can persist in logged basin with unlogged riparian buffers because of the slow decay of fallen redwoods. Through a watershed restoration program, Redwood National Park increases in-channel wood loading in low-order streams, but the effectiveness of this technique has not yet been tested by a large flood. Another unique characteristic of redwood is its ability to resprout from basal burls after cutting, so that root strength may not decline as sharply following logging as in other types of forests. An air photo inventory of landslides following a large storm in 1997 indicated: 1) that in the Redwood Creek watershed the volume of material displaced by landslides in harvested areas was not related to the time elapsed since logging, suggesting that the loss of root strength was not a decisive factor in landslide initiation, 2) landslide production on decommissioned logging roads was half that of untreated roads, and 3) landslides removed an estimated 28 Mg of organic carbon/km2 from hillslopes. The carbon budget of a redwood-dominated catchment is dominated by the vegetative component, but is also influenced by the extent of mass movement, erosion control work, and in-channel storage of wood.

  14. Budgeting and Beyond

    DEFF Research Database (Denmark)

    Rohde, Carsten

    Budgets and budget control has been known since the early 19th century1. However the use of budget control was until the beginning of the 1920ies in US primarily related to governmental units and states and to a minor extent to business units in practice. At that time James McKinsey describes...

  15. Between Bedside and Budget

    NARCIS (Netherlands)

    J.L.T. Blank; E. Eggink

    1998-01-01

    Original title: Tussen bed en budget. The report Between bedside and budget (Tussen bed en budget) describes an extensive empirical study of the efficiency of general and university hospitals in the Netherlands. A policy summary recaps the main findings of the study. Those findings

  16. Library Budget Primer.

    Science.gov (United States)

    Warner, Alice Sizer

    1993-01-01

    Discusses the advantages and disadvantages of six types of budgets commonly used by many different kinds of libraries. The budget types covered are lump-sum; formula; line or line-item; program; performance or function; and zero-based. Accompanying figures demonstrate the differences between four of the budget types. (three references) (KRN)

  17. Plasma arc cutting: speed and cut quality

    International Nuclear Information System (INIS)

    Nemchinsky, V A; Severance, W S

    2009-01-01

    When cutting metal with plasma arc cutting, the walls of the cut are narrower at the bottom than at the top. This lack of squareness increases as the cutting speed increases. A model of this phenomenon, affecting cut quality, is suggested. A thin liquid layer, which separates the plasma from the solid metal to be melted, plays a key role in the suggested model. This layer decreases heat transfer from the plasma to the solid metal; the decrease is more pronounced the higher the speed and the thicker the liquid metal layer. Since the layer is thicker at the bottom of the cut, the heat transfer effectiveness is lower at the bottom. The decrease in heat transfer effectiveness is compensated by the narrowness of the cut. The suggested model allows one to calculate the profile of the cut. The result of the calculations of the cutting speeds for plates of various thicknesses, at which the squareness of the cut is acceptable, agrees well with the speeds recommended by manufacturers. The second effect considered in the paper is the deflection of the plasma jet from the vertical at a high cutting speed. A qualitative explanation of this phenomenon is given. We believe the considerations of this paper are pertinent to other types of cutting with moving heat sources.

  18. 7 CFR 3402.14 - Budget and budget narrative.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Budget and budget narrative. 3402.14 Section 3402.14... GRADUATE AND POSTGRADUATE FELLOWSHIP GRANTS PROGRAM Preparation of an Application § 3402.14 Budget and budget narrative. Applicants must prepare the Budget, Form CSREES-2004, and a budget narrative...

  19. Industry adjusts 1992 E and P budgets

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that a midyear update of Salomon Bros. survey of the petroleum industry's 1992 exploration and production budgets pinpoints the ways operators are adjusting outlays to match the times. The New York financial firm's latest tally shows: Operators have made deep cuts in their 1992 US and Canadian E and P budgets since yearend 1991. Moderate increases budgeted earlier for E and P outside North America are intact. Many companies substantially underspent their budgets in first half 1992. In Salomon Bros. Largest survey---247 companies responded---operators the they were budgeting a 3.2% year to year decline in their 1992 worldwide E and P spending, compared with a 1.3% increase planned for 1992 in December 1991. The decline in spending falls entirely in North America. Preliminary indications suggest that 1993 E and P spending will be relatively flat in the US and flat to moderately increased in Canada. Elsewhere, spending should continue to rise steadily in 1993, Salomon Bros. The. Budgets exclude producing property purchases and merger or acquisition of other companies when possible

  20. Are cutaneous hypersensitivity tests to inhalant allergens a severity marker for vernal keratoconjunctivitis? Os testes de hipersensibilidade cutânea contra alérgenos inalantes são marcadores de gravidade da ceratoconjuntivite vernal?

    Directory of Open Access Journals (Sweden)

    Lauro Augusto de Oliveira

    2007-12-01

    Full Text Available PURPOSE: The purpose of this study was to analyze the cutaneous sensitivity to a variety of allergens in patients with vernal keratoconjunctivitis (VKC and to demonstrate the relation between skin response and clinical aspects of the disease. METHODS: Twenty patients with vernal keratoconjunctivitis were randomly chosen from the External Disease and Cornea Sector. They were clinically evaluated, and a score ranging from 0 to 20 was applied based on signs and symptoms on ophthalmic examination. All subjects underwent a skin prick test against standardized allergens, such as house dust mites D. pteronyssinus, D. farinae, and Blomia tropicalis, as well as allergens from cat, dog, fungi and feather. RESULTS: Seventy-five per cent of patients were positive for at least one of the allergens tested. House dust mites were responsible for the majority of the cases (75%. There was a poor correlation between the clinical score and sensitivity to allergens (r= - 0.119 for fungi; r= - 0.174 for dog; r= - 0.243 for house dust mites; r= - 0.090 for feather. A significant correlation was found only for cat allergen extract (r = - 0.510; p=0.024. CONCLUSIONS: Our study demonstrated poor correlation between cutaneous hypersensitivity tests and clinical findings in patients with vernal keratoconjuntivitis. We concluded that skin response to inhalant allergens is not a useful test to identify clinical severity and chronicity of inflammatory process in this disease.OBJETIVO: Avaliar o papel da sensibilização cutânea a diferentes aeroalérgenos em pacientes com ceratoconjuntivite vernal e a correlação entre esta e os aspectos clínicos da doença. MÉTODOS: Vinte pacientes do setor de doenças externas e córnea foram aleatoriamente convidados para participar deste estudo. Os pacientes foram avaliados e a eles foi atribuído um escore clínico variando de 0 a 20 de acordo com sinais e sintomas presentes no exame oftalmológico. Todos os pacientes foram

  1. Budget impact of vildagliptin

    Directory of Open Access Journals (Sweden)

    Orietta Zaniolo

    2008-09-01

    Full Text Available Introduction: to evaluate the impact on the Italian National Health Service (NHS budget of the recent introduction of the DPP-4 inhibitor vildagliptin in combination treatment for NIDDM patients. Methods: NIDDM patients eligible to vildagliptin treatment were identified and quantified based on approved indications and prevalence data review; adequate alternative strategies were identified; direct medical costs associated with competing strategies were calculated according to national practice and prices (drug acquisition, therapeutic monitoring, cost for managing severe adverse events – severe hypoglycemia events, fractures, new heart failure cases and the NHS budgetary impact was estimated according to market penetration assumptions (base-case: 5% and 10% for the first and second year, respectively. Results: patients estimated eligible for vildagliptin in Italy are about 237,500: pts inadequately controlled with metformin monotherapy (166,500, pts inadequately controlled with sulfonylurea monotherapy and intolerant/contraindicated to metformin (70,200, and those inadequately controlled with thiazolidinedione monotherapy (800. Costing and comparing of the vildagliptin-based and competing strategies revealed differences in both directions, depending on patient subgroup. Assuming uniform penetration among identified patient subgroups, vildagliptin introduction is expected to raise NHS costs by 2,750,000 Euro in the first and by 5,500,000 Euro in the second year, respectively representing 1,6% and 3,2% of the estimated total management cost of this patient population. Conclusions: the introduction of vildagliptin in the treatment of Italian NIDDM patients offers a new therapeutic option for three inadequately controlled NIDDM subpopulations; the financial impact on Italian NHS expenditures depends on patient selection and can be expected not to exceed 2-3% of the currently dedicated budget in the first two years.

  2. Cutting costs without drawing blood.

    Science.gov (United States)

    Copeland, T

    2000-01-01

    When looking for ways to cut costs, most managers reach for the head-count hatchet, and the markets usually roar with approval. But a company can almost always create far more sustainable value by rigorously evaluating the small-ticket capital items that often get rubber-stamped. Drawing on his experience as a consultant and providing numerous anecdotes, the author contends that those "little" requests often prove to be gold plated or unnecessary. A disciplined evaluation involves asking only eight questions and conducting postmortems--regular audits of units' capital spending. But the payoff is enormous. Because cutting the capital budget increases cash flow, the author argues that a permanent cut of just 15% in the planned level of capital spending could boost some companies' market capitalization by as much as 30%. The first three questions--Is this your investment to make? Does it really have to be new? How are our competitors meeting compliance needs?--are asked of operating managers as they assemble capital project requests. The next three are asked by senior managers of themselves and their colleagues as they examine proposals: Is the left hand duplicating investments made by the right? Are trade-offs between profit and capital spending well understood? Are there signs of budget massage? At the end of the review process, senior managers ask: Are we fully using shared assets? How fine-grained are our capacity measures? The author's suggestions for the postmortem include searching for systematic problems with whole classes of expenditures and making sure audit teams come up with specific recommendations for change.

  3. Understanding the Budget Process

    Directory of Open Access Journals (Sweden)

    Mesut Yalvaç

    2000-03-01

    Full Text Available Many different budgeting techniques can be used in libraries, and some combination of these will be appropriate for almost any individual situation. Li-ne-item, program, performance, formula, variable, and zero-base budgets all have features that may prove beneficial in the preparation of a budget. Budgets also serve a variety of functions, providing for short-term and long-term financial planning as well as for cash management over a period of time. Short-term plans are reflected in the operating budget, while long-term plans are reflected in the capital budget. Since the time when cash is available to an organization does not usually coincide with the time that disbursements must be made, it is also important to carefully plan for the inflow and outflow of funds by means of a cash budget.      During the budget process an organization selects its programs and activities by providing the necessary funding; the library, along with others in the organization, must justify its requests. Because of the cyclical nature of the budget process, it is possible continually to gather information and evaluate alternatives for the next budget period so that the library may achieve its maximum potential for service to its patrons.

  4. Multibeam Fibre Laser Cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

  5. Multibeam fiber laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov

    2009-01-01

    The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber......-laser cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

  6. Estonia cuts budget expenditures by over 3 percent

    Index Scriptorium Estoniae

    2008-01-01

    Eesti valitsus jõudis kokkuleppele riigieelarve kärbetes 3 miljardi krooni ulatuses. Eelarve tasakaalustamiseks tehakse kärpeid veel 100 miljoni krooni ulatuses. Rahandusminister Ivari Padari kommentaarid

  7. Propagation by Cuttings, Layering and Division

    OpenAIRE

    Relf, Diane; Ball, Elizabeth Carter

    2009-01-01

    The major methods of asexual propagation are cuttings, layering, division, and budding/grafting. Cuttings involve rooting a severed piece of the parent plant; layering involves rooting a part of the parent and then severing it; and budding and grafting are joining two plant parts from different varieties.

  8. Understanding the Budget Process

    OpenAIRE

    Mesut Yalvaç

    2000-01-01

    Many different budgeting techniques can be used in libraries, and some combination of these will be appropriate for almost any individual situation. Li-ne-item, program, performance, formula, variable, and zero-base budgets all have features that may prove beneficial in the preparation of a budget. Budgets also serve a variety of functions, providing for short-term and long-term financial planning as well as for cash management over a period of time. Short-term plans are reflected in the oper...

  9. Cutting state identification

    International Nuclear Information System (INIS)

    Berger, B.S.; Minis, I.; Rokni, M.

    1997-01-01

    Cutting states associated with the orthogonal cutting of stiff cylinders are identified through an analysis of the singular values of a Toeplitz matrix of third order cumulants of acceleration measurements. The ratio of the two pairs of largest singular values is shown to differentiate between light cutting, medium cutting, pre-chatter and chatter states. Sequences of cutting experiments were performed in which either depth of cut or turning frequency was varied. Two sequences of experiments with variable turning frequency and five with variable depth of cut, 42 cutting experiments in all, provided a database for the calculation of third order cumulants. Ratios of singular values of cumulant matrices find application in the analysis of control of orthogonal cutting

  10. Flexible Laser Metal Cutting

    DEFF Research Database (Denmark)

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

    2014-01-01

    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  11. CEA budget in 1982

    Energy Technology Data Exchange (ETDEWEB)

    1981-12-01

    In 1982, the amount of the CEA budget will be 13.4 billions French Francs. The main characteristics are the priority for employment and investments. In this budget programs are adapted to fit R and D to the government policy: innovation, industrial valorization and fundamental research especially thermonuclear fusion and in the electronuclear field to safety, reprocessing and radioactive waste management.

  12. Budgeting in Nonprofit Organizations.

    Science.gov (United States)

    Kelly, Lauren

    1985-01-01

    This description of the role of budgets in nonprofit organizations uses libraries as an example. Four types of budgets--legislative, management, cash, and capital--are critiqued in terms of cost effectiveness, implementation, and facilitation of organizational control and objectives. (CLB)

  13. Colorado Children's Budget 2010

    Science.gov (United States)

    Colorado Children's Campaign, 2010

    2010-01-01

    The "Children's Budget 2010" is intended to be a resource guide for policymakers and advocates who are interested in better understanding how Colorado funds children's programs and services. It attempts to clarify often confusing budget information and describe where the state's investment trends are and where those trends will lead the…

  14. Colorado Children's Budget 2013

    Science.gov (United States)

    Buck, Beverly; Baker, Robin

    2013-01-01

    The "Colorado Children's Budget" presents and analyzes investments and spending trends during the past five state fiscal years on services that benefit children. The "Children's Budget" focuses mainly on state investment and spending, with some analysis of federal investments and spending to provide broader context of state…

  15. The Agency's budget

    International Nuclear Information System (INIS)

    1964-01-01

    A total Agency Budget of $10 406 000 for 1965 was approved by the General Conference at its session of September 1964; the Budget for the year 1964 amounted to $9 812 000. The consolidated Budget figures are shown in the table at the end of this article. The Budget falls into two parts - the Regular Budget and the Operational Budget. The Regular Budget provides for the ordinary administrative expenses of the Agency, and for expert panels, special missions, symposia and conferences, distribution of information, and scientific and technical services. In conformity with the Agency's Statute, these expenses are met by contributions made according to Voluntary contributions are paid initially into a General Fund established for this purpose, and money for operations is transferred to the respective Operating Funds as appropriate, and as approved by the Board of Governors. The scale of assessments for 1965 is based on the United Nations scale for 1964. The assessments are estimated to yield $7 713 000 - an increase of 6.8 per cent; however, more than three quarters of this increase will be offset by credits which Member States will receive as a result of a cash surplus brought forward. The Operational Budget is financed by voluntary contributions and is divided into two parts - Operating Fund I, devoted to certain laboratory and research projects, and Operating Fund II, for technical assistance, training and research contracts.

  16. The uncertainty budget in pharmaceutical industry

    DEFF Research Database (Denmark)

    Heydorn, Kaj

    of their uncertainty, exactly as described in GUM [2]. Pharmaceutical industry has therefore over the last 5 years shown increasing interest in accreditation according to ISO 17025 [3], and today uncertainty budgets are being developed for all so-called critical measurements. The uncertainty of results obtained...... that the uncertainty of a particular result is independent of the method used for its estimation. Several examples of uncertainty budgets for critical parameters based on the bottom-up procedure will be discussed, and it will be shown how the top-down method is used as a means of verifying uncertainty budgets, based...

  17. Reações cutâneas graves adversas a drogas: aspectos relevantes ao diagnóstico e ao tratamento - Parte II Severe cutaneous adverse drug reactions: relevant aspects to diagnosis and treatment - Part II

    Directory of Open Access Journals (Sweden)

    Paulo Ricardo Criado

    2004-10-01

    Full Text Available As reações cutâneas graves adversas à droga são as que geralmente necessitam de internação hospitalar, por vezes em unidade de terapia intensiva ou de queimados, com observação minuciosa dos sinais vitais e da função de órgãos internos. O objetivo é descrever estas reações facilitando o seu reconhecimento e tratamento. Fazem parte deste grupo a Síndrome de Hipersensibilidade à Droga (SHD, a Pustulose Exantemática Generalizada Aguda (PEGA, a Necrose Cutânea induzida por Anticoagulante, as Vasculites de Pequenos Vasos (VPV, a Vasculite de Hipersensibilidade ao Propiltiouracil (VHP e as Reações tipo Doença do Soro (RDS. A SHD tem-se tornado de elevada relevância clínica devido ao uso amplo dos anticonvulsivantes aromáticos e da dapsona, utilizada no tratamento de doenças como a acne e a hanseníase. A PEGA é determinada principalmente pelos derivados beta-lactâmicos e tem como principal diagnóstico diferencial a psoríase pustulosa generalizada. As VPV tegumentares podem refletir uma doença multissistêmica subjacente, com danos graves em órgãos nobres, como os rins, pulmões e sistema hematológico, com morbidade elevada e possível letalidade. Abordamos as características clínicas e o tratamento destas reações adversas à droga.Severe cutaneous adverse drug reactions generally require hospitalization, sometimes in intensive care or burns units, for observation of the vital signs and the visceral function. The objective was to describe these reactions in order to facilitate recognition and treatment. This group of drug reactions includes drug hypersensitivity syndrome (DHS, acute generalized exanthematous pustulosis (AGEP, anticoagulant-induced skin necrosis, small-vessel vasculitis (SVV, propylthiouracil hypersensitivity vasculitis and serum sickness disease. DHS has been most relevant due to universal prescription of aromatic anticonvulsant drugs and dapsone use in the treatment of some diseases such as acne

  18. Budget institutions and taxation

    DEFF Research Database (Denmark)

    Aaskoven, Lasse

    2018-01-01

    While a number of different studies have explored the effects of budgetary procedures and the centralization of the budget process on government debt, deficits and spending, few of them have explored whether such fiscal institutions matter for public revenue. This article argues that centralizing...... the budget process raises the levels of taxation by limiting the ability of individual government officials to veto tax increases in line with common-pool-problem arguments regarding public finances. Using detailed data on budgetary procedures from 15 EU countries, the empirical analysis shows that greater...... centralization of the budget process increases taxation as a share of GDP and that both the type of budget centralization and level of government fractionalization matter for the size of this effect. The results suggest that further centralizing the budget process limits government debt and deficits...

  19. Preparing the operating budget.

    Science.gov (United States)

    Williams, R B

    1983-12-01

    The process of preparing a hospital pharmacy budget is presented. The desired characteristics of a budget and the process by which it is developed and approved are described. Fixed, flexible, and zero-based budget types are explained, as are the major components of a well-developed budget: expense, workload, productivity, revenue, and capital equipment and other expenditures. Specific methods for projecting expenses and revenues, based on historical data, are presented along with a discussion of variables that must be considered in order to achieve an accurate and useful budget. The current shift in emphasis away from revenue capture toward critical analysis of pharmacy costs underscores the importance of budgetary analysis for hospital pharmacy managers.

  20. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi

    2004-07-31

    We have tested the loop elevation system. We raised the mast to approximately 25 to 30 degrees from horizontal. All went well. However, while lowering the mast, it moved laterally a couple of degrees. Upon visual inspection, severe spalling of the concrete on the face of the support pillar, and deformation of the steel support structure was observed. At this time, the facility is ready for testing in the horizontal position. A new air compressor has been received and set in place for the ACTS test loop. A new laboratory has been built near the ACTS test loop Roughened cups and rotors for the viscometer (RS300) were obtained. Rheologies of aqueous foams were measured using three different cup-rotor assemblies that have different surface roughness. The relationship between surface roughness and foam rheology was investigated. Re-calibration of nuclear densitometers has been finished. The re-calibration was also performed with 1% surfactant foam. A new cuttings injection system was installed at the bottom of the injection tower. It replaced the previous injection auger. A mechanistic model for cuttings transport with aerated mud has been developed. Cuttings transport mechanisms with aerated water at various conditions were experimentally investigated. A total of 39 tests were performed. Comparisons between the model predictions and experimental measurements show a satisfactory agreement. Results from the ultrasonic monitoring system indicated that we could distinguish between different sand levels. We also have devised ways to achieve consistency of performance by securing the sensors in the caps in exactly the same manner as long as the sensors are not removed from the caps. A preliminary test was conducted on the main flow loop at 100 gpm flow rate and 20 lb/min cuttings injection rate. The measured bed thickness using the ultrasonic method showed a satisfactory agreement with nuclear densitometer readings. Thirty different data points were collected after the test

  1. Welding and cutting

    International Nuclear Information System (INIS)

    Drews, P.; Schulze Frielinghaus, W.

    1978-01-01

    This is a survey, with 198 literature references, of the papers published in the fields of welding and cutting within the last three years. The subjects dealt with are: weldability of the materials - Welding methods - Thermal cutting - Shaping and calculation of welded joints - Environmental protection in welding and cutting. (orig.) [de

  2. Development of YAG laser cutting system for decommissioning nuclear equipments

    International Nuclear Information System (INIS)

    Kasai, Takeshi; Nitta, Kazuhiko; Hosoda, Hiroshi.

    1995-01-01

    Technology of remote controlled cutting and reduction of generative secondary products have been required to the cutting system for decommissioning nuclear equipments. At a point of view that laser cutting technology by use of a Nd:YAG laser is effective, we have developed the laser cutting machine and carried out cutting tests for several stainless steel plates. As a result, the stainless steel plate with a thickness of 22mm could be cut by using an optical fiber which can flexibly propagate laser power, and possibility of application of this laser cutting system to decommissioning nuclear equipments was verified. (author)

  3. Development of YAG laser cutting system for decommissioning nuclear equipments

    Energy Technology Data Exchange (ETDEWEB)

    Kasai, Takeshi [Fuji Electric Co. Research and Development Ltd., Yokosuka, Kanagawa (Japan); Nitta, Kazuhiko; Hosoda, Hiroshi

    1995-07-01

    Technology of remote controlled cutting and reduction of generative secondary products have been required to the cutting system for decommissioning nuclear equipments. At a point of view that laser cutting technology by use of a Nd:YAG laser is effective, we have developed the laser cutting machine and carried out cutting tests for several stainless steel plates. As a result, the stainless steel plate with a thickness of 22mm could be cut by using an optical fiber which can flexibly propagate laser power, and possibility of application of this laser cutting system to decommissioning nuclear equipments was verified. (author).

  4. The Dynamic Definition of the Advertising Campaign Budget

    OpenAIRE

    Ostrianyn Serhii O.

    2017-01-01

    The article is aimed at exploring means for optimizing the budgeting of advertising activity, the optimal distribution of the advertising budget among several products, advertised by a company, and several advertising channels used during the distribution of an advertisement. The current status of the optimizationized budgeting models in the world and in Ukraine was analyzed. The topicality of scientific developments in this direction has been substantiated. The model is based on the non-line...

  5. Verification of uncertainty budgets

    DEFF Research Database (Denmark)

    Heydorn, Kaj; Madsen, B.S.

    2005-01-01

    , and therefore it is essential that the applicability of the overall uncertainty budget to actual measurement results be verified on the basis of current experimental data. This should be carried out by replicate analysis of samples taken in accordance with the definition of the measurand, but representing...... the full range of matrices and concentrations for which the budget is assumed to be valid. In this way the assumptions made in the uncertainty budget can be experimentally verified, both as regards sources of variability that are assumed negligible, and dominant uncertainty components. Agreement between...

  6. FY 1997 congressional budget request: Budget highlights

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This is an overview of the 1997 budget request for the US DOE. The topics of the overview include a policy overview, the budget by business line, business lines by organization, crosswalk from business line to appropriation, summary by appropriation, energy supply research and development, uranium supply and enrichment activities, uranium enrichment decontamination and decommissioning fund, general science and research, weapons activities, defense environmental restoration and waste management, defense nuclear waste disposal, departmental administration, Office of the Inspector General, power marketing administrations, Federal Energy Regulatory commission, nuclear waste disposal fund, fossil energy research and development, naval petroleum and oil shale reserves, energy conservation, economic regulation, strategic petroleum reserve, energy information administration, clean coal technology and a Department of Energy Field Facilities map.

  7. How the City of Utrecht achieved major budget savings through innovative service reviews

    NARCIS (Netherlands)

    Overmans, J.F.A.; Hiemstra, Jaring

    2016-01-01

    When a coalition government took office in the City of Utrecht in 2010, it was faced with central government-imposed austerity. The cabinet eventually agreed on a durable budget reduction of EUR 55 million from 2014 and onwards which this corresponded to a 10% cut of the discretionary budget every

  8. Proposed State Budget Improves Outlook for Kids, but Leaves Much Work to Be Done

    Science.gov (United States)

    Children Now, 2013

    2013-01-01

    For the first time in many years, the Administration's proposed state budget does not project a deficit. Painful budget cutting in recent years combined with voters passing Proposition 30 in November to generate revenues finally have put California on more stable fiscal ground. However, it is critical to recognize that kids have borne a…

  9. An Analysis and Allocation System for Library Collections Budgets: The Comprehensive Allocation Process (CAP)

    Science.gov (United States)

    Lyons, Lucy Eleonore; Blosser, John

    2012-01-01

    The "Comprehensive Allocation Process" (CAP) is a reproducible decision-making structure for the allocation of new collections funds, for the reallocation of funds within stagnant budgets, and for budget cuts in the face of reduced funding levels. This system was designed to overcome common shortcomings of current methods. Its philosophical…

  10. Device for cutting protrusions

    Science.gov (United States)

    Bzorgi, Fariborz M [Knoxville, TN

    2011-07-05

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  11. Obama Pushes Pre-K, Competitive Grants in Budget

    Science.gov (United States)

    Klein, Alyson

    2013-01-01

    President Barack Obama's latest budget proposal envisions a sweeping, multi-billion-dollar expansion of prekindergarten programs and doubles down on the administration's strategy of using competitive grants to drive big change in states and districts--all as school districts try to cope with the largest cuts to federal education spending in recent…

  12. The 1983 Budget and New Federalism: Trick, Trickle or Treat?

    Science.gov (United States)

    Levitan, Sar A.

    1982-01-01

    The author argues that 1983 federal budget cuts cannot and will not be replaced in sufficient measure by private efforts. The private sector will not provide the education nor the training and employment programs that federal funding has supported. (Editor/CT)

  13. Budget Automation System

    Data.gov (United States)

    U.S. Environmental Protection Agency — BAS is the central Agency system used to integrate strategic planning, annual planning, budgeting and financial management. BAS contains resource (dollars and FTE),...

  14. Water Budget Tool

    Science.gov (United States)

    If you're designing a new landscape or rethinking your current one, the WaterSense Water Budget Tool will tell you if you have designed a landscape that will use an appropriate amount of water for your climate.

  15. Global Carbon Budget 2017

    NARCIS (Netherlands)

    Le Quere, Corinne; Andrew, Robbie M.; Friedlingstein, Pierre; Sitch, Stephen; Pongratz, Julia; Manning, Andrew C.; Korsbakken, Jan Ivar; Peters, Glen P.; Canadell, Josep G.; Jackson, Robert B.; Boden, Thomas A.; Tans, Pieter P.; Andrews, Oliver D.; Arora, Vivek K.; Bakker, Dorothee C. E.; Barbero, Leticia; Becker, Meike; Betts, Richard A.; Bopp, Laurent; Chevallier, Frederic; Chini, Louise P.; Ciais, Philippe; Cosca, Catherine E.; Cross, Jessica; Currie, Kim; Gasser, Thomas; Harris, Ian; Hauck, Judith; Haverd, Vanessa; Houghton, Richard A.; Hunt, Christopher W.; Hurtt, George; Ilyina, Tatiana; Jain, Atul K.; Kato, Etsushi; Kautz, Markus; Keeling, Ralph F.; Goldewijk, Kees Klein; Koertzinger, Arne; Landschuetzer, Peter; Lefevre, Nathalie; Lenton, Andrew; Lienert, Sebastian; Lima, Ivan; Lombardozzi, Danica; Metzl, Nicolas; Millero, Frank; Monteiro, Pedro M. S.; Munro, David R.; Nabel, Julia E. M. S.; Nakaoka, Shin-ichiro; Nojiri, Yukihiro; Padin, X. Antonio; Peregon, Anna; Pfeil, Benjamin; Pierrot, Denis; Poulter, Benjamin; Rehder, Gregor; Reimer, Janet; Roedenbeck, Christian; Schwinger, Jorg; Seferian, Roland; Skjelvan, Ingunn; Stocker, Benjamin D.; Tian, Hanqin; Tilbrook, Bronte; Tubiello, Francesco N.; van der Laan-Luijkx, Ingrid T.; van der Werf, Guido R.; van Heuven, Steven; Viovy, Nicolas; Vuichard, Nicolas; Walker, Anthony P.; Watson, Andrew J.; Wiltshire, Andrew J.; Zaehle, Soenke; Zhu, Dan

    2018-01-01

    Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere - the "global carbon budget" - is important to better understand the global carbon cycle, support the development of climate policies, and project

  16. Jackson Revenue Budget

    Data.gov (United States)

    City of Jackson, Mississippi — This dataset shows the City of Jackson's FY2017 revenue budget, revenue collected to date, and the balance remaining to be collected. The data can be broken down by...

  17. Budget and Actuals

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — This dataset contains the Town's Year-to-Date Budget and Actuals for Fiscal Years 2016, 2017, and 2018. Fiscal years run from July 1 to June 30. The data comes from...

  18. Under Secretary of Defense (Comptroller) > Budget Materials > Budget1998

    Science.gov (United States)

    functionalStatements OUSD(C) History FMR Budget Materials Budget Execution Financial Management Improving Financial Performance Reports Regulations banner DoD Budget Request 2019 | 2018 | 2017 |2016 | 2015 | 2014 | 2013 | 2012 President's Budget request for the Department of Defense sustains the President's commitment to invest in

  19. A New Approach in Public Budgeting: Citizens' Budget

    Science.gov (United States)

    Bilge, Semih

    2015-01-01

    Change and transformation in the understanding and definition of citizenship has led to the emergence of citizen-oriented public service approach. This approach also raised a new term and concept in the field of public budgeting because of the transformation in the processes of public budgeting: citizens' budget. The citizens' budget which seeks…

  20. The Budget as a Management Tool: Zero Base Budgeting, Panacea ...

    African Journals Online (AJOL)

    Nigeria has been experiencing difficulties in Budget implementation. The objective of this article is to present alternative forms of budgeting and after exposition on them, to recommend one that could mitigate budget implementation problem for Nigeria. Two types of budgeting addressed are incremental and zero-base.

  1. European Union Budget Politics

    DEFF Research Database (Denmark)

    Citi, Manuele

    2015-01-01

    The marginal involvement of the European Union (EU) in redistributive policies and its limited fiscal resources have led to a notable lack of attention by EU scholars towards the EU budget and its dynamics. Yet the nature of the budgetary data and their high usability for statistical analysis make...... to form winning coalitions in the Council, the ideological positioning of the co-legislators and the inclusion of the cohesion countries have played a significant role in driving budget change....

  2. Fiscal year 2013 energy department budget: Proposed investments in clean energy research

    Science.gov (United States)

    Balcerak, Ernie

    2012-03-01

    Energy and environmental research programs generally fared well in President Barack Obama's proposed budget for the Department of Energy (DOE) for fiscal year (FY) 2013. In his State of the Union address, Obama called for the United States to pursue an "all of the above" energy strategy that includes fossil fuels, as well as a variety of renewable sources of energy. The DOE budget request supports that strategy, Energy Secretary Steven Chu said in a 13 February press briefing announcing the budget proposal. The proposed budget gives DOE 27.2 billion overall, a 3.2% increase from the FY 2012 enacted budget (see Table 1). This budget "reflects some tough choices," Chu said. The proposed budget would cut 4 billion in subsidies for oil and gas companies; many Republican members of Congress have already indicated that they oppose such cuts, suggesting that congressional approval of this budget may run into stumbling blocks. The budget would also cut funding for research and development projects that are already attracting private-sector investment or that are not working, and would reduce some of the department's operational costs.

  3. BUDGET AND PUBLIC DEBT

    Directory of Open Access Journals (Sweden)

    Morar Ioan Dan

    2014-12-01

    Full Text Available The issue of public budgeting is an important issue for public policy of the state, for the simple reason that no money from the state budget can not promote public policy. Budgetary policy is official government Doctrine vision mirror and also represents a starting point for other public policies, which in turn are financed by the public budget. Fiscal policy instruments at its disposal handles the public sector in its structure, and the private sector. Tools such as grant, budgetary allocation, tax, welfare under various forms, direct investments and not least the state aid is used by the state through their budgetary policies to directly and indirectly infuence sector, and the private. Fiscal policies can be grouped according to the structure of the public sector in these components, namely fiscal policy, budgeting and resource allocation policies for financing the budget deficit. An important issue is the financing of the budget deficit budgetary policies. There are two funding possibilities, namely, the higher taxes or more axles site and enter the second call to public loans. Both options involve extra effort from taxpayers in the current fiscal year when they pay higher taxes or a future period when public loans will be repaid. We know that by virtue of "fiscal pact" structural deficits of the member countries of the EU are limited by the European Commission, according to the macro structural stability and budget of each Member State. This problem tempers to some extent the governments of the Member States budgetary appetite, but does not solve the problem of chronic budget deficits. Another issue addressed in this paper is related to the public debt, the absolute amount of its relative level of public datoriri, about the size of GDP, public debt financing and its repayment sources. Sources of public debt issuance and monetary impact on the budget and monetary stability are variables that must underpin the justification of budgetary

  4. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi

    2004-01-31

    pressure and temperature. Several parameters were measured during these tests including differential pressure and mixture density in the annulus. Flow patterns during the aerated fluids test have been observed through the view port in the annulus and recorded by a video camera. Most of the flow patterns were slug flow. Further increase in gas flow rate changed the wavy flow pattern to slug flow. At this stage, all of the planned cuttings transport tests have been completed. The results clearly show that temperature significantly affects the cuttings transport efficiency of aerated muds, in addition to the liquid flow rate and gas liquid ratio (GLR). Since the printed circuit board is functioning (Task 11) with acceptable noise level we were able to conduct several tests. We used the newly designed pipe test section to conduct tests. We tested to verify that we can distinguish between different depths of sand in a static bed of sand in the pipe section. The results indicated that we can distinguish between different sand levels. We tested with water, air and a mix of the two mediums. Major modifications (installation of magnetic flow meter, pipe fittings and pipelines) to the dynamic bubble characterization facility (DTF, Task 12) were completed. An Excel program that allows obtaining the desired foam quality in DTF was developed. The program predicts the foam quality by recording the time it takes to pressurize the loop with nitrogen.

  5. European labs brace for German cuts: international collaboration

    CERN Multimedia

    Clery, D

    1996-01-01

    Germany, the largest contributor to international European research labs, announced plans to reduce its contributions an average of 8% in the nation's latest budget. CERN and other labs are worried that the cuts will endanger ongoing projects and that other countries may follow Germany's lead.

  6. Extension without Cut

    OpenAIRE

    Straßburger , Lutz

    2012-01-01

    International audience; In proof theory one distinguishes sequent proofs with cut and cut-free sequent proofs, while for proof complexity one distinguishes Frege-systems and extended Frege-systems. In this paper we show how deep inference can provide a uniform treatment for both classifications, such that we can define cut-free systems with extension, which is neither possible with Frege-systems, nor with the sequent calculus. We show that the propositional pigeon-hole principle admits polyno...

  7. Underwater cutting techniques developments

    International Nuclear Information System (INIS)

    Bach, F.-W.

    1990-01-01

    The primary circuit structures of different nuclear powerplants are constructed out of stainless steels, ferritic steels, plated ferritic steels and alloys of aluminium. According to the level of the specific radiation of these structures, it is necessary for dismantling to work with remote controlled cutting techniques. The most successful way to protect the working crew against exposure of radiation is to operate underwater in different depths. The following thermal cutting processes are more or less developed to work under water: For ferritic steels only - flame cutting; For ferritic steels, stainless steels, cladded steels and aluminium alloys - oxy-arc-cutting, arc-waterjet-cutting with a consumable electrode, arc-saw-cutting, plasma-arc-cutting and plasma-arc-saw. The flame cutting is a burning process, all the other processes are melt-cutting processes. This paper explains the different techniques, giving a short introduction of the theory, a discussion of the possibilities with the advantages and disadvantages of these processes giving a view into the further research work in this interesting field. (author)

  8. The Dynamic Definition of the Advertising Campaign Budget

    Directory of Open Access Journals (Sweden)

    Ostrianyn Serhii O.

    2017-10-01

    Full Text Available The article is aimed at exploring means for optimizing the budgeting of advertising activity, the optimal distribution of the advertising budget among several products, advertised by a company, and several advertising channels used during the distribution of an advertisement. The current status of the optimizationized budgeting models in the world and in Ukraine was analyzed. The topicality of scientific developments in this direction has been substantiated. The model is based on the non-linear logistics function of the response value of sales for the costs of placement of an advertising message, including market saturation effects and the accumulation of promotional effect. A complex advertising budgeting model has been proposed, which includes the dynamic definition of a budget constraint based on the expected sales return from a byed advertising campaign whose budget is being optimized. The proposed model allows to schedule advertising activities in conditions of uncertainty and rapid change of environment.

  9. Laser cutting or water-jet cutting. Laser setsudan ka water-jet setsudan ka

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, T. (Shibuya Kogyo Co. Ltd., Ishikawa (Japan))

    1991-05-01

    The recent spread of carbon oxide laser cutter is so startlingly fast, but at the same time, water jet cutting using ultra high pressure water stream is drawing attention as it has identical characteristics, and opens the way to cutting materials that have been hitherto difficult to cut. The authors, who are fabricators of cutters of both types, gave the comparisons and explanations on several examples referring to materials that can be cut, cutting accuracy, speed, shape and thermal effects to cut face, and running cost in detail. However, simple comparison is difficult. For instance, cutting 6 mm thick SUS sheet costs a running cost of 65 yen per meter in laser cutting, and 535 yen per meter in water jet cutting, but this situation is often reversed when other material or sheet thickness is selected. The actual situation in the sheet metal processing industry at the present time is that it uses by far more laser processing machines, and uses water jet cutters to supplement for cutting materials more difficult to cut. 10 figs., 3 tabs.

  10. Political Budget Cycles

    DEFF Research Database (Denmark)

    Aaskoven, Lasse; Lassen, David Dreyer

    2017-01-01

    The political budget cycle—how elections affect government fiscal policy—is one of the most studied subjects in political economy and political science. The key theoretical question is whether incumbent governments can time or structure public finances in ways that improve their chances of reelec......The political budget cycle—how elections affect government fiscal policy—is one of the most studied subjects in political economy and political science. The key theoretical question is whether incumbent governments can time or structure public finances in ways that improve their chances...... on political budget cycles have recently focused on conditions under which such cycles are likely to obtain. Much recent research focuses on subnational settings, allowing comparisons of governments in similar institutional environments, and a consensus on the presences of cycles in public finances...

  11. Cutting Class Harms Grades

    Science.gov (United States)

    Taylor, Lewis A., III

    2012-01-01

    An accessible business school population of undergraduate students was investigated in three independent, but related studies to determine effects on grades due to cutting class and failing to take advantage of optional reviews and study quizzes. It was hypothesized that cutting classes harms exam scores, attending preexam reviews helps exam…

  12. Fundamentals of cutting.

    Science.gov (United States)

    Williams, J G; Patel, Y

    2016-06-06

    The process of cutting is analysed in fracture mechanics terms with a view to quantifying the various parameters involved. The model used is that of orthogonal cutting with a wedge removing a layer of material or chip. The behaviour of the chip is governed by its thickness and for large radii of curvature the chip is elastic and smooth cutting occurs. For smaller thicknesses, there is a transition, first to plastic bending and then to plastic shear for small thicknesses and smooth chips are formed. The governing parameters are tool geometry, which is principally the wedge angle, and the material properties of elastic modulus, yield stress and fracture toughness. Friction can also be important. It is demonstrated that the cutting process may be quantified via these parameters, which could be useful in the study of cutting in biology.

  13. Public Budget Database - Budget Authority and offsetting receipts 1976-Current

    Data.gov (United States)

    Executive Office of the President — This file contains historical budget authority and offsetting receipts for 1976 through the current budget year, as well as four years of projections. It can be used...

  14. AGF program budget 1991

    International Nuclear Information System (INIS)

    1991-01-01

    The present program budget of the Arbeitsgemeinschaft Grossforschungseinrichtungen (AGF) (Cooperative of Major Research Establishments) describes its research and development objectives and the progress of work in the major research establishments involved and states the medium-term annual financial and personnel effort. (orig.) [de

  15. AGF program budget 1992

    International Nuclear Information System (INIS)

    1992-01-01

    The program budget of the Arbeitsgemeinschaft Grossforschungseinrichtungen (AGF) (Cooperative of Major Research Establishments) describes its research and development objectives and the progress of work in the major research establishments involved and states the medium-term annual financial and personnel effort. (orig.)

  16. Implementing Responsibility Centre Budgeting

    Science.gov (United States)

    Vonasek, Joseph

    2011-01-01

    Recently, institutes of higher education (universities) have shown a renewed interest in organisational structures and operating methodologies that generate productivity and innovation; responsibility centre budgeting (RCB) is one such process. This paper describes the underlying principles constituting RCB, its origin and structural elements, and…

  17. Budgeting Academic Space

    Science.gov (United States)

    Harris, Watson

    2011-01-01

    There are many articles about space management, including those that discuss space calculations, metrics, and categories. Fewer articles discuss the space budgeting processes used by administrators to allocate space. The author attempts to fill this void by discussing her administrative experiences with Middle Tennessee State University's (MTSU)…

  18. Integrated Budget Office Toolbox

    Science.gov (United States)

    Rushing, Douglas A.; Blakeley, Chris; Chapman, Gerry; Robertson, Bill; Horton, Allison; Besser, Thomas; McCarthy, Debbie

    2010-01-01

    The Integrated Budget Office Toolbox (IBOT) combines budgeting, resource allocation, organizational funding, and reporting features in an automated, integrated tool that provides data from a single source for Johnson Space Center (JSC) personnel. Using a common interface, concurrent users can utilize the data without compromising its integrity. IBOT tracks planning changes and updates throughout the year using both phasing and POP-related (program-operating-plan-related) budget information for the current year, and up to six years out. Separating lump-sum funds received from HQ (Headquarters) into separate labor, travel, procurement, Center G&A (general & administrative), and servicepool categories, IBOT creates a script that significantly reduces manual input time. IBOT also manages the movement of travel and procurement funds down to the organizational level and, using its integrated funds management feature, helps better track funding at lower levels. Third-party software is used to create integrated reports in IBOT that can be generated for plans, actuals, funds received, and other combinations of data that are currently maintained in the centralized format. Based on Microsoft SQL, IBOT incorporates generic budget processes, is transportable, and is economical to deploy and support.

  19. Reforming the EU Budget

    DEFF Research Database (Denmark)

    Citi, Manuele

    The marginal involvement of the EU in redistributive policies and its limited fiscal resources have led to a lack of attention to the EU budget and its determinants. In this paper I analyse an original dataset containing yearly data on the main macrocategories of expenditure and how they have...

  20. Zero-Based Budgeting.

    Science.gov (United States)

    Wichowski, Chester

    1979-01-01

    The zero-based budgeting approach is designed to achieve the greatest benefit with the fewest undesirable consequences. Seven basic steps make up the zero-based decision-making process: (1) identifying program goals, (2) classifying goals, (3) identifying resources, (4) reviewing consequences, (5) developing decision packages, (6) implementing a…

  1. Budgeting and Finance

    NARCIS (Netherlands)

    F.K.M. van Nispen tot Pannerden (Frans)

    2012-01-01

    textabstractThe Call for a Budgetary Theory: The appeal of Valdimer Key for a budgetary theory marks the interest in public budgeting in modern history. He clearly referred to a normative theory, raising the question: ‘on what basis shall it be decided to allocate X dollars to activity A instead of

  2. Kinetic energy budget details

    Indian Academy of Sciences (India)

    Abstract. This paper presents the detailed turbulent kinetic energy budget and higher order statistics of flow behind a surface-mounted rib with and without superimposed acoustic excitation. Pattern recognition technique is used to determine the large-scale structure magnitude. It is observed that most of the turbulence ...

  3. A Better Budget Rule

    Science.gov (United States)

    Dothan, Michael; Thompson, Fred

    2009-01-01

    Debt limits, interest coverage ratios, one-off balanced budget requirements, pay-as-you-go rules, and tax and expenditure limits are among the most important fiscal rules for constraining intertemporal transfers. There is considerable evidence that the least costly and most effective of such rules are those that focus directly on the rate of…

  4. Global Carbon Budget 2016

    NARCIS (Netherlands)

    Le Quéré, Corinne; Andrew, Robbie M.; Canadell, Josep G.; Sitch, Stephen; Ivar Korsbakken, Jan; Peters, Glen P.; Manning, Andrew C.; Boden, Thomas A.; Tans, Pieter P.; Houghton, Richard A.; Keeling, Ralph F.; Alin, Simone; Andrews, Oliver D.; Anthoni, Peter; Barbero, Leticia; Bopp, Laurent; Chevallier, Frédéric; Chini, Louise P.; Ciais, Philippe; Currie, Kim; Delire, Christine; Doney, Scott C.; Friedlingstein, Pierre; Gkritzalis, Thanos; Harris, Ian A; Hauck, Judith; Haverd, Vanessa; Hoppema, Mario; Klein Goldewijk, Kees; Jain, Atul K.; Kato, Etsushi; Körtzinger, Arne; Landschützer, Peter; Lefèvre, Nathalie; Lenton, Andrew; Lienert, Sebastian; Lombardozzi, Danica; Melton, Joe R.; Metzl, Nicolas; Millero, Frank; Monteiro, Pedro M S; Munro, David R.; Nabel, Julia E M S; Nakaoka, Shin Ichiro; O'Brien, Kevin; Olsen, Are; Omar, Abdirahman M.; Ono, Tsuneo; Pierrot, Denis; Poulter, Benjamin; Rödenbeck, Christian; Salisbury, Joe; Schuster, Ute; Schwinger, Jörg; Séférian, Roland; Skjelvan, Ingunn; Stocker, Benjamin D.; Sutton, Adrienne J.; Takahashi, Taro; Tian, Hanqin; Tilbrook, Bronte; Van Der Laan-Luijkx, Ingrid T.; Van Der Werf, Guido R.; Viovy, Nicolas; Walker, Anthony P.; Wiltshire, Andrew J.; Zaehle, Sönke

    2016-01-01

    Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere-the "global carbon budget"-is important to better understand the global carbon cycle, support the development of climate policies, and project future

  5. Sabotage in Capital Budgeting

    DEFF Research Database (Denmark)

    Brunner, Markus; Ostermaier, Andreas

    2018-01-01

    for honesty inhibits sabotage. Moreover, honesty suppresses negative reciprocity and thus reduces sabotage not only directly but also indirectly. Our findings warn firms to consider the sabotage of investments as a hidden cost of control in budgeting. They show that honesty has a spill-over effect...

  6. Advanced cutting techniques: laser and fissuration cutting

    International Nuclear Information System (INIS)

    Migliorati, B.; Gay, P.

    1984-01-01

    Experimental tests have been performed using CO 2 laser with output power 1 to 15 kW to evaluate the effect of varying the following parameters: material (carbon steel Fe 42 C, stainless steel AISI 304, concrete), laser power, beam characteristics, work piece velocity, gas type and distribution on the laser interaction zone. In the case of concrete, drilling depths of 80 mm were obtained in a few seconds using a 10 kW laser beam. Moreover pieces of 160 mm were cut at 0.01 meters per minute. Results with carbon steel indicated maximum thicknesses of 110 mm, cut at 0.01 meters per minute with 10 kW, depths about 20% lower were obtained with the AISI 304 stainless steel. A parallel investigation was aimed at characterizing particulate emission during the laser cutting process. At the end of the research it was possible to elaborate a preliminary proposal concerning a laser based dismantling system for the application to a typical Nuclear Power Station. (author)

  7. Laser Cutting, Development Trends

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1999-01-01

    In this paper a short review of the development trends in laser cutting will be given.The technology, which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal, as it will expand in heavy industry and in cutting...... of 3-dimensional shapes.The CO2-laser will also in the near future be the dominating laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type....

  8. Integration of small computers in the low budget facility

    International Nuclear Information System (INIS)

    Miller, G.E.; Crofoot, T.A.

    1988-01-01

    Inexpensive computers (PC's) are well within the reach of low budget reactor facilities. It is possible to envisage many uses that will both improve capabilities of existing instrumentation and also assist operators and staff with certain routine tasks. Both of these opportunities are important for survival at facilities with severe budget and staffing limitations. (author)

  9. Experimental testing of exchangeable cutting inserts cutting ability

    OpenAIRE

    Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal

    2013-01-01

    The article deals with experimental testing of the cutting ability of exchangeable cutting inserts. Eleven types of exchangeable cutting inserts from five different manufacturers were tested. The tested cutting inserts were of the same shape and were different especially in material and coating types. The main aim was both to select a suitable test for determination of the cutting ability of exchangeable cutting inserts and to design such testing procedure that could make it possible...

  10. Magnetofluidic testing of rock cutting knives

    International Nuclear Information System (INIS)

    Buioca, C.D.; Iusan, Vasile; Pirlea, Remus

    2002-01-01

    The nondestructive testing of cutting knives consists in the determination of nonuniformity of a magnetic fluid layer applied on the horizontally placed surface of the magnetized cutting plate of the knife. A low constant magnetic field was applied perpendicular to the knife surface and a uniform magnetic fluid layer was applied. The defects as nonuniform brass layer, fissures or small cavities between the cutting plate and knife core determine the apparition of magnetic field gradients and therefore magnetic forces acting on the magnetic fluid which migrates to the zones with higher magnetic field intensity. After several minutes, a nonuniform layer of magnetic fluid was directly observed. Quantitative results, concerning the position and dimensions of the defect, were obtained by computer aided processing of the magnetic fluid layer image. Experimental data for several cutting knives are presented in the paper

  11. Cut without Killing.

    Science.gov (United States)

    Black, Susan

    1991-01-01

    The zero-based curriculum model can help school boards and administrators make decisions about what to keep and what to cut. All instructional programs are ranked and judged in categories ranging from required to optional. (MLF)

  12. Short-cut math

    CERN Document Server

    Kelly, Gerard W

    1984-01-01

    Clear, concise compendium of about 150 time-saving math short-cuts features faster, easier ways to add, subtract, multiply, and divide. Each problem includes an explanation of the method. No special math ability needed.

  13. Laser cutting system

    Science.gov (United States)

    Dougherty, Thomas J

    2015-03-03

    A workpiece cutting apparatus includes a laser source, a first suction system, and a first finger configured to guide a workpiece as it moves past the laser source. The first finger includes a first end provided adjacent a point where a laser from the laser source cuts the workpiece, and the first end of the first finger includes an aperture in fluid communication with the first suction system.

  14. How Can I Stop Cutting?

    Science.gov (United States)

    ... Educators Search English Español How Can I Stop Cutting? KidsHealth / For Teens / How Can I Stop Cutting? ... in a soft, cozy blanket Substitutes for the Cutting Sensation You'll notice that all the tips ...

  15. Cutting and Self-Harm

    Science.gov (United States)

    ... Your feelings Feeling sad Cutting and self-harm Cutting and self-harm Self-harm, sometimes called self- ... There are many types of self-injury, and cutting is one type that you may have heard ...

  16. Flux cutting in superconductors

    International Nuclear Information System (INIS)

    Campbell, A M

    2011-01-01

    This paper describes experiments and theories of flux cutting in superconductors. The use of the flux line picture in free space is discussed. In superconductors cutting can either be by means of flux at an angle to other layers of flux, as in longitudinal current experiments, or due to shearing of the vortex lattice as in grain boundaries in YBCO. Experiments on longitudinal currents can be interpreted in terms of flux rings penetrating axial lines. More physical models of flux cutting are discussed but all predict much larger flux cutting forces than are observed. Also, cutting is occurring at angles between vortices of about one millidegree which is hard to explain. The double critical state model and its developments are discussed in relation to experiments on crossed and rotating fields. A new experiment suggested by Clem gives more direct information. It shows that an elliptical yield surface of the critical state works well, but none of the theoretical proposals for determining the direction of E are universally applicable. It appears that, as soon as any flux flow takes place, cutting also occurs. The conclusion is that new theories are required. (perspective)

  17. Innovations: laser-cutting nickel-titanium

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, T.R.; Moore, B.; Toyama, N. [LPL Systems, Inc., Mountain View, CA (United States)

    2002-07-01

    Laser-cutting is well established as the preferred method for manufacturing many endovascular medical devices. Sometimes laser processing has been poorly understood by nickel-titanium (NiTi) material suppliers, medical device manufacturers, and device designers, but the field has made important strides in the past several years. A variety of sample, nonspecific applications are presented for cutting tubing and sheet stock. Limiting constraints, key considerations, and areas for future development are identified. (orig.)

  18. PUBLIC EXPENDITURE ON HEALTH IN LOCAL BUDGETS

    Directory of Open Access Journals (Sweden)

    Cristinel ICHIM

    2017-06-01

    Full Text Available This paper entitled "Public expenditure on health in local budgets" aims analysing and deepening major spending categories that public authorities finance at local level, namely health expenditure. In the first part of the article we have specified the content and role of this category of expenditure in local budgets and also made some feedback on decentralization in health. In the second part of the work, based on data available in Statistical Yearbook of Romania, we have carried out an analysis of the dynamics of health spending from local budgets to emphasize their place and role in the health care expenses. The research carried out follows that the evolution and structure of health expenditure financed from local budgets is determined, along with the legislative framework in the field, by several variables that differ from one territorial administrative unit to another: the existence of sanitary units, their type, the involving of local public authorities in their development and modernization, the number and the social structure of the population. The research shows that over the period 1993-2015, the dynamics of the share of health spending in total expenditures of local budgets is sinusoidal, with a minimum threshold in 2000 of only 0.3%.

  19. On Permuting Cut with Contraction

    OpenAIRE

    Borisavljevic, Mirjana; Dosen, Kosta; Petric, Zoran

    1999-01-01

    The paper presents a cut-elimination procedure for intuitionistic propositional logic in which cut is eliminated directly, without introducing the multiple-cut rule mix, and in which pushing cut above contraction is one of the reduction steps. The presentation of this procedure is preceded by an analysis of Gentzen's mix-elimination procedure, made in the perspective of permuting cut with contraction. It is also shown that in the absence of implication, pushing cut above contraction doesn't p...

  20. Execution of local budgets in 2014: tension is not decreasing

    Directory of Open Access Journals (Sweden)

    Anna Ivanovna Povarova

    2015-05-01

    Full Text Available Vladimir Putin’s “May decrees” have received the status of a national goal. On the background of decreasing economic performance exacerbated by external shocks, the implementation of these decrees has become a heavy burden for regional budgets without an adequate financial support from the federal budget. As a result, almost every Russian region has suffered losses by the end of 2014. The fallacy of the ongoing course of budget policy has long been criticized by many leading scholars and experts; moreover, they proposed positive recommendations on the development of alternative policies. Unfortunately, the results of 2014 prove that the RF Government has not abandoned the policy of budget consolidation. On the contrary, gratuitous financial assistance to the regions is actively transformed into debt financing in the form of budget loans. However, the regional authorities can rely on this quasi-support, which is a temporary factor, only provided that the budget is deficit-free and at the expense of abandonment of spending on economic development and on the improvement of welfare of the population. The results of the analysis of the facts indicate that the budget-related problems of the regions, arising largely from the inefficient federal budget policy, have reached the critical level. One fourth of the subjects that had a predominant share of market debt turned out to be in a pre-default state. The breakdown of public finances has affected the most prosperous regions, which is contrary to the paradigm of sustainable regional development. The regions entered the crisis of 2014 with huge debt and budget deficit; the situation was not so grave during the financial and economic crisis of 2009. In terms of the upcoming 10% cut of federal budget expenditures [5], the subjects of the Russian Federation can hardly expect an increase in financial support. They will obviously have to adapt their budgets to the changing economic situation. But in

  1. Bounded Rationality and Budgeting

    OpenAIRE

    Ibrahim, Mukdad

    2016-01-01

    This article discusses the theory of bounded rationality which had been introduced by Herbert Simon in the 1950s. Simon introduced the notion of bounded rationality stating that while decision-makers strive for rationality, they are limited by the effect of the environment, their information process capacity and by the constraints on their information storage and retrieval capabilities. Moreover, this article tries to specifically blend this notion into budgeting, using the foundations of inc...

  2. Programme budget 1981

    International Nuclear Information System (INIS)

    1980-01-01

    There are 11 main fields of KfK R + D activities which are connected with one or more of the research goals of a) assurance of nuclear fuel supply, b) nuclear waste management, c) safety of nuclear facilities, d) basic research and research on new technologies. The scientific and technical tasks connected with these goals in 1981 and on a medium-term basis as well as the financial requirements are presented in the programme budget. (orig.) [de

  3. The Incredible Shrinking Budget

    Science.gov (United States)

    T.H.E. Journal, 2013

    2013-01-01

    If district technology leaders had a nickel for every time they heard the phrase "the new normal," they'd have all the money they need to run their IT departments. In an effort to help readers think about their budgets in creative and practical ways, "T.H.E. Journal" and the Consortium for School Networking (CoSN) recently convened a panel of CTOs…

  4. Freqüência e severidade de corte das fôlhas do sisal(*. Influência sôbre o desenvolvimento das plantas, produção e características da fibra Frequency and severity of leaf cutting upon the growth, longevity and yield of the sisal plant

    Directory of Open Access Journals (Sweden)

    J. C. Medina

    1954-01-01

    Full Text Available O A. apresenta nêste artigo os resultados obtidos em uma experiência de corte das folhas do sisal (Agave sisalana Perrine, na qual se procurou comparar os efeitos da combinação de diversas freqüências e severidades de corte sobre o desenvolvimento, produção e longevidade da planta, assim como sôbre as características tecnológicas da fibra. Ficou provado que, com cortes freqüentes e severos, o ciclo de vida das plantas fica bastante prolongado, ao mesmo tempo que a produção de fibras por unidade de área decai sensivelmente, em conseqüência da redução de tamanho das fôlhas e menor conteúdo de fibras nas fôlhas das plantas submetidas a êsse sistema de corte. Os exames de laboratório demonstraram que, enquanto as características químicas das fibras não eram afetadas pelos sistemas de corte estudados, as características físicas eram, pelo contrário, sensivelmente afetados pelo corte freqüente e severo.This paper describes the results obtained with the sisal plant (Agave sisalana Perrine in a cutting trial located in the "Estação Experimental Central do Instituto Agronômico", at Campinas. This trial was designed to compare the effects of four cutting cycles, combined with three levels of severity of cutting, upon growth, longevity, and yield of the sisal plant, and on the quality of its fiber. The experiment was laid out in 4 randomized blocks of 4 plots, each plot having 3 sub-plots. Sub-plot size was of twelve plants spaced 2.5 x 1.5 m and arranged in two rows of 6 plants each. The results can be summarized as follows : (a The life cycle of the sisal plant was greatly influenced by the cutting method used. The greater the frequency and severity of cutting the slower was the growth of the plant and the longer it took to pole. (b Light cutting at six to twelve-month cycles was conducive to early poling, and the plant yielded fewer, though heavier, leaves. (c Heavy cutting at a three-month cycle reduced plant size

  5. Test of remote control cutting equipment by Nd:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Akio [Fuji Electric Corp. Research and Development Ltd., Yokosuka, Kanagawa (Japan); Hosoda, Hiroshi

    1997-11-01

    Technology of remote controlled cutting and reduction of generative secondary products have been required to the cutting system for decommissioning nuclear equipments. At a point of view that laser cutting technology by use of a Nd:YAG laser is effective, we have developed the laser cutting machine and carried out cutting tests for several stainless steel plates. This report is described the result of experiment by test equipment, about element technology of remote controlled cutting nuclear equipments. (author)

  6. Test of remote control cutting equipment by Nd:YAG laser

    International Nuclear Information System (INIS)

    Shimizu, Akio; Hosoda, Hiroshi.

    1997-01-01

    Technology of remote controlled cutting and reduction of generative secondary products have been required to the cutting system for decommissioning nuclear equipments. At a point of view that laser cutting technology by use of a Nd:YAG laser is effective, we have developed the laser cutting machine and carried out cutting tests for several stainless steel plates. This report is described the result of experiment by test equipment, about element technology of remote controlled cutting nuclear equipments. (author)

  7. Streamlined library programming how to improve services and cut costs

    CERN Document Server

    Porter-Reynolds, Daisy

    2014-01-01

    In their roles as community centers, public libraries offer many innovative and appealing programs; but under current budget cuts, library resources are stretched thin. With slashed budgets and limited staff hours, what can libraries do to best serve their publics? This how-to guide provides strategies for streamlining library programming in public libraries while simultaneously maintaining-or even improving-quality delivery. The wide variety of principles and techniques described can be applied on a selective basis to libraries of all sizes. Based upon the author's own extensive experience as

  8. Female genital cutting.

    Science.gov (United States)

    Perron, Liette; Senikas, Vyta; Burnett, Margaret; Davis, Victoria

    2013-11-01

    To strengthen the national framework for care of adolescents and women affected by female genital cutting (FGC) in Canada by providing health care professionals with: (1) information intended to strengthen their knowledge and understanding of the practice; (2) directions with regard to the legal issues related to the practice; (3) clinical guidelines for the management of obstetric and gynaecological care, including FGC related complications; and (4) guidance on the provision of culturally competent care to adolescents and women with FGC. Published literature was retrieved through searches of PubMed, CINAHL, and The Cochrane Library in September 2010 using appropriate controlled vocabulary (e.g., Circumcision, Female) and keywords (e.g., female genital mutilation, clitoridectomy, infibulation). We also searched Social Science Abstracts, Sociological Abstracts, Gender Studies Database, and ProQuest Dissertations and Theses in 2010 and 2011. There were no date or language restrictions. Searches were updated on a regular basis and incorporated in the guideline to December 2011. Grey (unpublished) literature was identified through searching the websites of health technology assessment and health technology-related agencies, clinical practice guideline collections, clinical trial registries, and national and international medical specialty societies. The quality of evidence in this document was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care (Table 1). Summary Statements 1. Female genital cutting is internationally recognized as a harmful practice and a violation of girls' and women's rights to life, physical integrity, and health. (II-3) 2. The immediate and long-term health risks and complications of female genital cutting can be serious and life threatening. (II-3) 3. Female genital cutting continues to be practised in many countries, particularly in sub-Saharan Africa, Egypt, and Sudan. (II-3) 4. Global migration

  9. Development of cutting techniques of steel pipe by wire sawing

    International Nuclear Information System (INIS)

    Kamiyama, Yoshinori; Inai, Shinsuke

    2004-01-01

    A cutting method has a high cutting efficiency and enable cutting in safe. A wire saw cutting method is used for dismantling of massive concrete structures such as nuclear power plants with an effective and safe mean. In the case of dismantling of structures with multiple pipes installed at these facilities, an effective method is also demanded. If a wire saw method to remotely cut target objects in a large block in bulk is applicable, it will be expected an effective dismantling work under severe conditions with radioactivity. Although the wire saw method has adaptability for any shapes of cutting target objects and is widely adopted in dismantling of concrete constructs, it has few actual achievements in dismantling of steel structures such as steel pipe bundle. This study aims to verify its cutting characteristics and adaptability as a cutting method by conducting a cutting basic test to develop a diamond wire saw method to efficiently cut constructs with multiple pipes in a bundle. The test proved that a wire saw cutting method apply to dismantle structures with steel pipe bundle. A wire saw for metal cutting is adaptable in dismantling of bundle of thick carbon steel and stainless steel pipes. And also a wire saw for concrete cutting is adaptable in dismantling of pipe bundle structure with a mortar. (author)

  10. Monitoring the Efficiency of Budget Management of Trade Enterprises in Ukraine

    Directory of Open Access Journals (Sweden)

    Frolova Larysa V

    2016-08-01

    Full Text Available The article justifies the actuality of carrying out the monitoring of budget management efficiency at trade enterprises in Ukraine. It has been found that the efficiency of each trade enterprise management system, in particular the efficiency of budget management system, is determined by several factors, among which there considered the enterprise business profile, the competitive situation in the market and the standard of living of the population. The efficiency of budget management and, as a result, the efficiency of trade enterprises’ activity is reflected in the results of the effectiveness of the main indicators of the financial budgets of enterprises. Therefore, using the method of fuzzy sets, there carried out an integral evaluation of the efficiency of budget management based on the efficiency of financial budgets: the budget revenues and expenditures, cash flow budget and budgeted balance sheet. The study is carried out for Ukraine as a whole, and its most developed regions.

  11. Improved cutting performance in high power laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    2003-01-01

    Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described.......Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described....

  12. The relationship between the Balanced Budget Act (BBA) and hospital profitability.

    Science.gov (United States)

    Younis, Mustafa Z

    2006-01-01

    The Balanced Budget Act of 1997 (BBA) reduced the payment for fees for service providers and reduced the subsidy paid by the government for teaching hospitals. Since the passage of such cost containment measures, debates regarding their impact on hospitals, graduate medical education, and access to health care were raised. The need to examine the effect of such payment reduction on hospital profitability was widely ignored. We examined the relationship between the BBA and hospital profitability by using return on assets to measure profitability, by running an ordinary least squares regression for 1996 as pre-BBA and 1999 as post-BBA. We controlled for variables that were not included in previous literature, such as disproportionate share hospital status, critical access hospital status, and graduate medical education, measured by teaching hospitals to measure the effect of BBA cuts on teaching hospitals. Furthermore we incorporated several economic, financial, and utilization variables in the model. We used 1996 and 1999 data in our analysis to bridge potential effects of the BBA. To locate hospitals that changed ownership status we cross-matched the Medicare Cost Report data with the American Hospital Association Annual Survey. We found that overall hospital profitability declined as a result of the introduction of the BBA; however, small rural hospitals that converted to critical access status enjoyed improvement in financial status over the period of our study. Hospitals that converted to for-profit status did not improve in financial status, and showed a lower earning after the conversation. Our results show that the BBA had a negative effect on hospitals because of cuts in its reimbursement policy, except for critical access hospitals, which show improvement because of their exemption from the prospective payment system. Our study differs from others by using national comprehensive data for years that focus exclusively on the Balanced Budget Act period. We

  13. Users' manual for fault tree analysis code: CUT-TD

    International Nuclear Information System (INIS)

    Watanabe, Norio; Kiyota, Mikio.

    1992-06-01

    The CUT-TD code has been developed to find minimal cut sets for a given fault tree and to calculate the occurrence probability of its top event. This code uses an improved top-down algorithm which can enhance the efficiency in deriving minimal cut sets. The features in processing techniques incorporated into CUT-TD are as follows: (1) Consecutive OR gates or consecutive AND gates can be coalesced into a single gate. As a result, this processing directly produces cut sets for the redefined single gate with each gate not being developed. (2) The independent subtrees are automatically identified and their respective cut sets are separately found to enhance the efficiency in processing. (3) The minimal cut sets can be obtained for the top event of a fault tree by combining their respective minimal cut sets for several gates of the fault tree. (4) The user can reduce the computing time for finding minimal cut sets and control the size and significance of cut sets by inputting a minimum probability cut off and/or a maximum order cut off. (5) The user can select events that need not to be further developed in the process of obtaining minimal cut sets. This option can reduce the number of minimal cut sets, save the computing time and assists the user in reviewing the result. (6) Computing time is monitored by the CUT-TD code so that it can prevent the running job from abnormally ending due to excessive CPU time and produce an intermediate result. The CUT-TD code has the ability to restart the calculation with use of the intermediate result. This report provides a users' manual for the CUT-TD code. (author)

  14. Determination of cut front position in laser cutting

    International Nuclear Information System (INIS)

    Pereira, M; Thombansen, U

    2016-01-01

    Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable. (paper)

  15. Determination of cut front position in laser cutting

    Science.gov (United States)

    Pereira, M.; Thombansen, U.

    2016-07-01

    Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable.

  16. Reação cutânea grave induzida por carbamazepina no tratamento da neuralgia pós-herpética: relato de caso Reacción cutánea grave inducida por la carbamazepina en el tratamiento de la neuralgia postherpética: relato de caso Severe carbamazepine-induced cutaneous reaction in the treatment of post-herpetic neuralgia: case report

    Directory of Open Access Journals (Sweden)

    João Batista Santos Garcia

    2010-08-01

    . CONCLUSIONES: La SSJ/NET es una reacción cutánea grave con potencial para la morbilidade y mortalidad elevadas y que exige una intervención rápida y un manejo adecuado. También alertamos sobre el uso de la carbamazepina, que debe siempre ser inspeccionado, especialmente en los ancianos.BACKGROUND AND OBJECTIVES: Post-herpetic neuralgia (PHN is the main complication of herpes zoster. Carbamazepine (CBZ, a well-tolerated anticonvulsant, but frequently associated with severe cutaneous reactions, such as the Stevens-Johnson syndrome (SJS and toxic epidermal necrolysis (TEN is used in the treatment of this complication. The objective of this article was to report a case of SJS/TEN secondary to CBZ in a patient with PHN. CASE REPORT: This is a female patient with continuous severe, burning, chock-like pain in the thoracic region and dorsum associated with reduced strength in the ipsilateral upper limb and diaphoresis. She had crusty and erythematous lesions in the dorsal region of the thorax with allodynia and dysesthesia in the affected dermatome. She was treated with CBZ 300 mg.day-1, amitriptyline (AMT 12.5 mg at bedtime, and infiltration with local anesthetic in the affected region. After 15 days, she developed malaise, fever, muscle pain, and arthralgia with a mild non-specific cutaneous rash. Carbamazepine was discontinued immediately. One week later, she was hospitalized with urticaria, generalized exanthema, erythematous cutaneous eruptions, bullae, and purpuric maculae all over her body. The impression was of carbamazepine-induced SJS/TEN. She evolved with progressive worsening of her symptoms, with increase in the number and size of cutaneous lesions, besides generalized erythematous macular rash, areas of necrosis, and erosions with symmetrical loosening of the epidermis in face, neck, thorax, dorsum, and limbs, affecting more that 50% of her body surface, besides involvement of buccal, conjunctival, and genital mucosa with vesicular erosions. She had progressive

  17. Algorithm for finding minimal cut sets in a fault tree

    International Nuclear Information System (INIS)

    Rosenberg, Ladislav

    1996-01-01

    This paper presents several algorithms that have been used in a computer code for fault-tree analysing by the minimal cut sets method. The main algorithm is the more efficient version of the new CARA algorithm, which finds minimal cut sets with an auxiliary dynamical structure. The presented algorithm for finding the minimal cut sets enables one to do so by defined requirements - according to the order of minimal cut sets, or to the number of minimal cut sets, or both. This algorithm is from three to six times faster when compared with the primary version of the CARA algorithm

  18. Statistical – Econometric Analysis of the Correlations between the Social Security Budget and the Main Macroeconomic Aggregates in Romania

    Directory of Open Access Journals (Sweden)

    Emilia ŢIŢAN

    2011-02-01

    Full Text Available This paper analyses the correlation between social security budget and the main macroeconomic indicators (like GDP, monthly average gross earnings, unemployment in Romania during the period 2000 – 2009. Romania faces a more severe economic recession than originally anticipated. Although the implementation of anti-crisis program was able to lead to normalization of financial conditions, the contraction of economic activity is higher than initial projections. Because of the great policy debate in Romania about the impact of the reduction of pensions and salaries and increases of taxations on the reduction of budget deficit, we have explained in our paper the basic sides of the balanced budget debate. There are three basic sides to the balanced budget debate. The traditionalists argue for a reduction of the budget deficit since it harms the economy. Another group holds the Ricardian view of government debt in believing that there is no real harm done to the economy by the national debt. A third group claims one way or another that the budget deficit is not an adequate measure of fiscal policy. We will argue which of these views is most reasonable, based on a study case. The study is based on official data published by the National Institute of Statistics, with the specification that they are transformed into real values in order to assure the data comparability. The methodology used is the correlation analysis, the factorial analysis and the regression analysis, in order to evaluate the impact of some macroeconomic policies on the budget deficit. Three hypotheses on macroeconomic policies are discussed in the paper and their influences on the budget deficit. The main problem in Romania was that the macroeconomic policies didn't give enough attention to budget deficit in order to keep it under control. This is the main cause of the actual unfavourable economical situation in Romania, with a huge budget deficit, with a decrease in economic activity

  19. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

    2000-01-30

    This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

  20. Theoretical Models for Orthogonal Cutting

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This review of simple models for orthogonal cutting was extracted from: “L. De Chiffre: Metal Cutting Mechanics and Applications, D.Sc. Thesis, Technical University of Denmark, 1990.”......This review of simple models for orthogonal cutting was extracted from: “L. De Chiffre: Metal Cutting Mechanics and Applications, D.Sc. Thesis, Technical University of Denmark, 1990.”...

  1. Global carbon budget 2013

    International Nuclear Information System (INIS)

    Le Quere, C.; Moriarty, R.; Jones, S.D.; Boden, T.A.; Peters, G.P.; Andrew, R.M.; Andres, R.J.; Ciais, P.; Bopp, L.; Maignan, F.; Viovy, N.

    2014-01-01

    Accurate assessment of anthropogenic carbon dioxide (CO 2 ) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and a methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics and model estimates and their interpretation by a broad scientific community. We discuss changes compared to previous estimates, consistency within and among components, alongside methodology and data limitations. CO 2 emissions from fossil-fuel combustion and cement production (EFF) are based on energy statistics, while emissions from land-use change (ELUC), mainly deforestation, are based on combined evidence from land-cover change data, fire activity associated with deforestation, and models. The global atmospheric CO 2 concentration is measured directly and its rate of growth (GATM) is computed from the annual changes in concentration. The mean ocean CO 2 sink (SOCEAN) is based on observations from the 1990's, while the annual anomalies and trends are estimated with ocean models. The variability in SOCEAN is evaluated for the first time in this budget with data products based on surveys of ocean CO 2 measurements. The global residual terrestrial CO 2 sink (SLAND) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models forced by observed climate, CO 2 and land cover change (some including nitrogen-carbon interactions). All uncertainties are reported as ±1, reflecting the current capacity to characterise the annual estimates of each component of the global carbon budget. For the last decade available (2003-2012), EFF was 8.6±0.4 GtC yr -1 , ELUC 0.9±0.5 GtC yr -1 , GATM 4.3±0

  2. The forgotten R and D budget

    International Nuclear Information System (INIS)

    Hunt, R.; Mohsberg, J.

    1992-01-01

    The research and development budget for hydropower has dwindled in recent years. Increased R and D funding could improve hydropower's effectiveness. Of the $1.5 trillion US budget for 1992, only $1 million was devoted to research and development (R and D) for hydroelectric generation. This is because hydropower has been branded a mature technology no longer in need of R and D. Nevertheless, as the source of nearly 10 percent of all US electricity, hydropower offers the nation's best opportunity for significant increased renewable energy production in the near future. The US Department of Energy (DOE) has estimated an additional 50,000 MW of hydropower capacity is potentially developable. Of the total $3 billion R and D budget for all DOE programs in 1992, the combined R and D amount for the other primary renewable energy resources was $161.3 million. Whether mature or not, all methods of producing electricity have attendant problems and development needs that must be addressed with sufficient R and D if the US is to remain energy independent, competitive and safe as a nation. In comparing R and D budget trends for electrical generating resources during the past 10 years there are several questions to be asked: Are other mature technologies, such as coal and nuclear power, receiving budget treatment similar to hydropower? What is the intended use of the R and D funds for these mature technologies? Is any technology - medical, communications, electrical generating or other - ever so mature as to be unable to benefit from R and D? What use could the hydropower industry make of additional R and D funding? What is the commitment of the administration and Congress to developing renewable energy resources when the source of 85 percent of current renewable energy receives only $1 million for R and D of the $3 billion DOE R and D budget? This article addresses these questions

  3. Marketing with limited budget

    OpenAIRE

    Smirnova, Daria

    2017-01-01

    The purpose of this research-based thesis was to get an idea how managers of two small resembling hotels of a specific region deal with marketing process with a limited budget. In addition, the aim of the thesis was to examine if hotel managers who were interviewed perceive marketing only in the way of ‘promotion’ rather than marketing research, marketing mix and marketing environment theories. It was also found out if hotel managers of those hotels consider marketing as a key to successful h...

  4. The optimization of the cutting process of diamonds with a YAG laser

    Directory of Open Access Journals (Sweden)

    A. J. Lubbe

    1993-07-01

    Full Text Available A laser cannot, as generally assumed by the layman, cut right through a diamond with a single cut. A couple of hundred cuts may be necessary to "chip carve" through a diamond. There are several parameters, for example cutting speed, focus point, overlapping of cuts, etc., that influence the cutting process. With a view to optimizing the cutting process, laser cuts in diamonds were studied in a systematic way with the aid of an electron microscope. The method, technique and the results of the research are discussed in this article.

  5. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Troy Reed; Ergun Kuru

    2004-09-30

    The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a

  6. High speed laser cutting machine. Kosoku reza kakoki

    Energy Technology Data Exchange (ETDEWEB)

    Shinno, N. (Matsushita Electric Industrial Co. Ltd., Kadoma, Osaka (Japan))

    1993-11-01

    The carbon dioxide gas laser cutting machine is being used widely for from cutting soft steel and stainless steel, etc. to intermetallic welding and in the field of cutting in particular, concerning sheet cutting, it has been changing the existing monopoly of the turret punch press, and as for medium and thick plate cutting, that of the gas plasma fusing device. This article is the general description of high speed laser cutting machine. Concerning the laser cutting (sheet cutting in particular), as the essential items for securing severe cutting accuracy and, at the same time, improving the cutting speed, the following matters are picked up for respective explanation; improvement of stationary machine accuracy, improvement of dynamic machine accuracy, improvement of quality of laser beam as well as optimization of cutting conditions, and shortening of piercing time. Also explanation is given to the respective items, namely speeding-up of medium and thick plate cutting, and reduction of load onto the operator by improved operation. Finally, feeding and removing of a sheet only, and feeding and removing with a pallet are mentioned as the efforts for automation and energy saving. 3 figs., 1 tab.

  7. Environmental budget and policy goal

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Sang Hwan [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    The assigned budget for environmental sector is quite insufficient to meet enormous environmental demand. Under this circumstance, there is only one way to solve environmental problems efficiently, i.e. to use a given budget efficiently. Therefore, the study on efficient utilization of a given environmental invested finance is needed by customizing a diagnosis of present condition on the operation of environmental budget and environmental investment analysis. In this respect, an entire national budget of 1999 and environmental budget were analyzed in this study. By analyzing economic efficiency of sewage disposal program, integrated septic tank system, VOC regulation, incinerator construction program, food waste disposal program, and recycling program, an efficient budget policy was presented. 19 refs., 18 figs., 169 tabs.

  8. Baseline budgeting for continuous improvement.

    Science.gov (United States)

    Kilty, G L

    1999-05-01

    This article is designed to introduce the techniques used to convert traditionally maintained department budgets to baseline budgets. This entails identifying key activities, evaluating for value-added, and implementing continuous improvement opportunities. Baseline Budgeting for Continuous Improvement was created as a result of a newly named company president's request to implement zero-based budgeting. The president was frustrated with the mind-set of the organization, namely, "Next year's budget should be 10 to 15 percent more than this year's spending." Zero-based budgeting was not the answer, but combining the principles of activity-based costing and the Just-in-Time philosophy of eliminating waste and continuous improvement did provide a solution to the problem.

  9. Does state budget pressure matter for uncompensated care spending in hospitals? Findings from Texas and California.

    Science.gov (United States)

    Chang, Jongwha; Patel, Isha; Suh, Won S; Lin, Hsien-Chang; Kim, Sunjung; Balkrishnan, Rajesh

    2012-01-01

    This study examined the impact of state budget cuts on uncompensated care at general acute care hospital organizations. This study capitalized on the variations in the states of Texas and California to form a natural experiment testing the joint impact of budget cut status on uncompensated care costs, as well as specific charity care costs and bad debt expenses from indigent patients. Budget cuts in the state of Texas occurred in the year 2004. Information was obtained from the Texas Department of Health and the California Department of Health Services regarding financial characteristics of hospitals and from the American Hospital Directory annual survey regarding organizational characteristics of hospitals. We created three dependent variables: R(UC) (the ratio of total uncompensated care costs to gross patient revenue), R(CC) (the ratio of charity care to total patient revenue) and R(BD) (the ratio of bad debt expenses to gross patient revenue). Using a two-period panel data set and individual hospital fixed effects, we captured hospital uncompensated care spending that could also have influenced budget cut status. Additionally, the impact of the state budget cut status on hospitals' uncompensated care spending, charity care spending and bad debt expenses was also estimated using the similar methodology. In this study, we included 416 (in Texas) and 352 (in California) public, not-for-profit (NFP) and for-profit (FP) hospitals that completed the annual survey during the study period 2002-2005. For the state of Texas, results from the fixed effect model confirmed that the year 2005 was directly related to increased R(UC) and R(CC) . The coefficients of 2005 were significantly and positively associated with R(UC) (0.43, p budget cut pressure on uncompensated care provided in Texas general acute care hospitals. Copyright © 2012 John Wiley & Sons, Ltd.

  10. Skin Cut Construction

    DEFF Research Database (Denmark)

    2017-01-01

    of the exhibition is to create a connection between the artistic and technological development through Danish rms and researchers who represent the newest technology in concrete treatment. The rst part exhibition (skin) will focus on the surface treatment of concrete (’graphical concrete’), the second (cut...

  11. Cutting Cakes Carefully

    Science.gov (United States)

    Hill, Theodore P.; Morrison, Kent E.

    2010-01-01

    This paper surveys the fascinating mathematics of fair division, and provides a suite of examples using basic ideas from algebra, calculus, and probability which can be used to examine and test new and sometimes complex mathematical theories and claims involving fair division. Conversely, the classical cut-and-choose and moving-knife algorithms…

  12. Classroom Cut Ups

    Science.gov (United States)

    Lord, Stacy

    2011-01-01

    Discovering identity can be a lifelong challenge for some people, while others seem to figure it out right away. During the middle school years, finding one's identity can be a daunting task. Most students will spend a considerable amount of time during these middle years looking for it. This lesson on cut-paper self-portraits lets students delve…

  13. Abrasive water jet cutting

    International Nuclear Information System (INIS)

    Leist, K.J.; Funnell, G.J.

    1988-01-01

    In the process of selecting a failed equipment cut-up tool for the process facility modifications (PFM) project, a system using an abrasive water jet (AWJ) was developed and tested for remote disassembly of failed equipment. It is presented in this paper

  14. After the Ribbon Cutting

    DEFF Research Database (Denmark)

    Hodge, Graeme A.; Boulot, Emille; Duffield, Colin

    2017-01-01

    Much attention has gone towards ‘up-front’ processes when delivering infrastructure public–private partnerships (PPPs), but less on how to best govern after the ribbon is cut and the infrastructure built. This paper identifies the primary contractual and institutional governance challenges arising...

  15. Simultaneous Cake Cutting

    DEFF Research Database (Denmark)

    Balkanski, Eric; Branzei, Simina; Kurokawa, David

    2014-01-01

    We introduce the simultaneous model for cake cutting (the fair allocation of a divisible good), in which agents simultaneously send messages containing a sketch of their preferences over the cake. We show that this model enables the computation of divisions that satisfy proportionality — a popular...

  16. Global Carbon Budget 2017

    Science.gov (United States)

    Le Quéré, Corinne; Andrew, Robbie M.; Friedlingstein, Pierre; Sitch, Stephen; Pongratz, Julia; Manning, Andrew C.; Korsbakken, Jan Ivar; Peters, Glen P.; Canadell, Josep G.; Jackson, Robert B.; Boden, Thomas A.; Tans, Pieter P.; Andrews, Oliver D.; Arora, Vivek K.; Bakker, Dorothee C. E.; Barbero, Leticia; Becker, Meike; Betts, Richard A.; Bopp, Laurent; Chevallier, Frédéric; Chini, Louise P.; Ciais, Philippe; Cosca, Catherine E.; Cross, Jessica; Currie, Kim; Gasser, Thomas; Harris, Ian; Hauck, Judith; Haverd, Vanessa; Houghton, Richard A.; Hunt, Christopher W.; Hurtt, George; Ilyina, Tatiana; Jain, Atul K.; Kato, Etsushi; Kautz, Markus; Keeling, Ralph F.; Klein Goldewijk, Kees; Körtzinger, Arne; Landschützer, Peter; Lefèvre, Nathalie; Lenton, Andrew; Lienert, Sebastian; Lima, Ivan; Lombardozzi, Danica; Metzl, Nicolas; Millero, Frank; Monteiro, Pedro M. S.; Munro, David R.; Nabel, Julia E. M. S.; Nakaoka, Shin-ichiro; Nojiri, Yukihiro; Padin, X. Antonio; Peregon, Anna; Pfeil, Benjamin; Pierrot, Denis; Poulter, Benjamin; Rehder, Gregor; Reimer, Janet; Rödenbeck, Christian; Schwinger, Jörg; Séférian, Roland; Skjelvan, Ingunn; Stocker, Benjamin D.; Tian, Hanqin; Tilbrook, Bronte; Tubiello, Francesco N.; van der Laan-Luijkx, Ingrid T.; van der Werf, Guido R.; van Heuven, Steven; Viovy, Nicolas; Vuichard, Nicolas; Walker, Anthony P.; Watson, Andrew J.; Wiltshire, Andrew J.; Zaehle, Sönke; Zhu, Dan

    2018-03-01

    Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere - the global carbon budget - is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify the five major components of the global carbon budget and their uncertainties. CO2 emissions from fossil fuels and industry (EFF) are based on energy statistics and cement production data, respectively, while emissions from land-use change (ELUC), mainly deforestation, are based on land-cover change data and bookkeeping models. The global atmospheric CO2 concentration is measured directly and its rate of growth (GATM) is computed from the annual changes in concentration. The ocean CO2 sink (SOCEAN) and terrestrial CO2 sink (SLAND) are estimated with global process models constrained by observations. The resulting carbon budget imbalance (BIM), the difference between the estimated total emissions and the estimated changes in the atmosphere, ocean, and terrestrial biosphere, is a measure of imperfect data and understanding of the contemporary carbon cycle. All uncertainties are reported as ±1σ. For the last decade available (2007-2016), EFF was 9.4 ± 0.5 GtC yr-1, ELUC 1.3 ± 0.7 GtC yr-1, GATM 4.7 ± 0.1 GtC yr-1, SOCEAN 2.4 ± 0.5 GtC yr-1, and SLAND 3.0 ± 0.8 GtC yr-1, with a budget imbalance BIM of 0.6 GtC yr-1 indicating overestimated emissions and/or underestimated sinks. For year 2016 alone, the growth in EFF was approximately zero and emissions remained at 9.9 ± 0.5 GtC yr-1. Also for 2016, ELUC was 1.3 ± 0.7 GtC yr-1, GATM was 6.1 ± 0.2 GtC yr-1, SOCEAN was 2.6 ± 0.5 GtC yr-1, and SLAND was 2.7 ± 1.0 GtC yr-1, with a small BIM of -0.3 GtC. GATM continued to be higher in 2016 compared to the past decade (2007-2016), reflecting in part the high fossil emissions and the small SLAND

  17. Global Carbon Budget 2017

    Directory of Open Access Journals (Sweden)

    C. Le Quéré

    2018-03-01

    Full Text Available Accurate assessment of anthropogenic carbon dioxide (CO2 emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere – the global carbon budget – is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify the five major components of the global carbon budget and their uncertainties. CO2 emissions from fossil fuels and industry (EFF are based on energy statistics and cement production data, respectively, while emissions from land-use change (ELUC, mainly deforestation, are based on land-cover change data and bookkeeping models. The global atmospheric CO2 concentration is measured directly and its rate of growth (GATM is computed from the annual changes in concentration. The ocean CO2 sink (SOCEAN and terrestrial CO2 sink (SLAND are estimated with global process models constrained by observations. The resulting carbon budget imbalance (BIM, the difference between the estimated total emissions and the estimated changes in the atmosphere, ocean, and terrestrial biosphere, is a measure of imperfect data and understanding of the contemporary carbon cycle. All uncertainties are reported as ±1σ. For the last decade available (2007–2016, EFF was 9.4 ± 0.5 GtC yr−1, ELUC 1.3 ± 0.7 GtC yr−1, GATM 4.7 ± 0.1 GtC yr−1, SOCEAN 2.4 ± 0.5 GtC yr−1, and SLAND 3.0 ± 0.8 GtC yr−1, with a budget imbalance BIM of 0.6 GtC yr−1 indicating overestimated emissions and/or underestimated sinks. For year 2016 alone, the growth in EFF was approximately zero and emissions remained at 9.9 ± 0.5 GtC yr−1. Also for 2016, ELUC was 1.3 ± 0.7 GtC yr−1, GATM was 6.1 ± 0.2 GtC yr−1, SOCEAN was 2.6 ± 0.5 GtC yr−1, and SLAND was 2.7 ± 1.0 GtC yr−1, with a small BIM of −0.3 GtC. GATM continued to be

  18. BUDGET PLANNING IN FINANCIAL MANAGEMENT

    OpenAIRE

    Nataliya Melnichuk

    2015-01-01

    The purpose of the paper is to determine the nature, targets, functions, principles and methods of budget planning and development of classifications due to its types. The essence of budget planning presented by various authors, is own interpretation (the process of developing a plan of formation, distribution and redistribution of financial funds according to budget system units during the reporting period based on budgetary purposes and targets defined by socio-economic development strategy...

  19. Budget 2002: business taxation measures

    OpenAIRE

    Blow, L.; Hawkins, M.; Klemm, A.; McCrae, J.; Simpson, H.

    2002-01-01

    Following the 2002 Budget, this Briefing Note examines some of the Chancellor's changes to business taxation. A number of Budget measures, including the research and development tax credit for large companies and the exemption of capital gains on the sale of subsidiaries, are welcome and should improve the efficiency of the UK's tax system. All of these measures were subject to extensive prior consultation. A number of other measures were not foreshadowed in the Pre-Budget Report. Three of th...

  20. Collection assessment and acquisitions budgets

    CERN Document Server

    Lee, Sul H

    2013-01-01

    This invaluable new book contains timely information about the assessment of academic library collections and the relationship of collection assessment to acquisition budgets. The rising cost of information significantly influences academic libraries'abilities to acquire the necessary materials for students and faculty, and public libraries'abilities to acquire material for their clientele. Collection Assessment and Acquisitions Budgets examines different aspects of the relationship between the assessment of academic library collections and the management of library acquisition budgets. Librar

  1. Dose budget for exposure control

    International Nuclear Information System (INIS)

    Nair, P.S.

    1999-01-01

    Dose budget is an important management tool to effectively control the collective dose incurred in a nuclear facility. The budget represents a set of yardsticks or guidelines for use in controlling the internal activities, involving radiation exposure in the organisation. The management, through budget can evaluate the radiation protection performance at every level of the organisation where a number of independent functional groups work on routine and non-routine jobs. The discrepancy between the plan and the actual performance is high lighted through the budgets. The organisation may have to change the course of its operation in a particular area or revise its plan with due focus on appropriate protective measures. (author)

  2. Operational budgeting using fuzzy goal programming

    OpenAIRE

    Saeed Mohammadi; Kamran Feizi; Ali Khatami Firouz Abadi

    2013-01-01

    Having an efficient budget normally has different advantages such as measuring the performance of various organizations, setting appropriate targets and promoting managers based on their achievements. However, any budgeting planning requires prediction of different cost components. There are various methods for budgeting planning such as incremental budgeting, program budgeting, zero based budgeting and performance budgeting. In this paper, we present a fuzzy goal programming to estimate oper...

  3. BUDGET PLANNING IN FINANCIAL MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Nataliya Melnichuk

    2015-11-01

    Full Text Available The purpose of the paper is to determine the nature, targets, functions, principles and methods of budget planning and development of classifications due to its types. The essence of budget planning presented by various authors, is own interpretation (the process of developing a plan of formation, distribution and redistribution of financial funds according to budget system units during the reporting period based on budgetary purposes and targets defined by socio-economic development strategy is proposed. Methodology. The following methods such as cognition, induction, deduction, analysis and synthesis have been used in the process of survey. Results of the survey proves that budget planning plays an essential role in the financial management. On condition business environment changing even the best management system can become obsolete. The immediate reaction to the new trends in the financial system as a whole, in the industry is possible with budget planning as well. It also allows to make appropriate adjustments to the plans. Adjustment of long-term, medium-term and short-term plans makes it possible, without changing goals, to change ways of their achievement and thus to raise the level of efficiency of budget funds formation and use. It is necessary to revise the whole system plans, including their mission and goals in the case of global changes in the external and internal environment. Practical implications. The proposed approach to the classification of budget planning types allows to cope with the shortcomings of modern planning in the public sector (the development of the targets according to the state budget expenditures in Ukraine remains a formality and it rarely complies with realities. Value/originality is specified in the proposed interpretation which differs from existing ones that provides clarification of budget planning purpose in financial management; classification of budget planning principles, which differs from previous

  4. Operational budgeting using fuzzy goal programming

    Directory of Open Access Journals (Sweden)

    Saeed Mohammadi

    2013-10-01

    Full Text Available Having an efficient budget normally has different advantages such as measuring the performance of various organizations, setting appropriate targets and promoting managers based on their achievements. However, any budgeting planning requires prediction of different cost components. There are various methods for budgeting planning such as incremental budgeting, program budgeting, zero based budgeting and performance budgeting. In this paper, we present a fuzzy goal programming to estimate operational budget. The proposed model uses fuzzy triangular as well as interval number to estimate budgeting expenses. The proposed study of this paper is implemented for a real-world case study in province of Qom, Iran and the results are analyzed.

  5. Some possibilities for determining cutting data when using laser cutting:

    OpenAIRE

    Radovanović, Miroslav

    2006-01-01

    The technological problems faced in the field of the application of laser-cutting machines lie in insufficient knowledge of the laser technique and the absence of both sufficiently reliable practical data and knowledge about the parameters affecting the work process itself. A significant parameter that is necessary to determine and to enter in an NC-program is the cutting speed. Various authors analyze the laser-cutting process and give mathematical models where laser cutting is modeled by us...

  6. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Neelima Godugu

    2000-07-30

    ACTS flow loop is now operational under elevated pressure and temperature. Currently, experiments with synthetic based drilling fluids under pressure and temperature are being conducted. Based on the analysis of Fann 70 data, empirical correlations defining the shear stress as a function of temperature, pressure and the shear rate have been developed for Petrobras synthetic drilling fluids. PVT equipment has been modified for testing Synthetic oil base drilling fluids. PVT tests with Petrobras Synthetic base mud have been conducted and results are being analyzed Foam flow experiments have been conducted and the analysis of the data has been carried out to characterize the rheology of the foam. Comparison of pressure loss prediction from the available foam hydraulic models and the test results has been made. Cuttings transport experiments in horizontal annulus section have been conducted using air, water and cuttings. Currently, cuttings transport tests in inclined test section are being conducted. Foam PVT analysis tests have been conducted. Foam stability experiments have also been conducted. Effects of salt and oil concentration on the foam stability have been investigated. Design of ACTS flow loop modification for foam and aerated mud flow has been completed. A flow loop operation procedure for conducting foam flow experiments under EPET conditions has been prepared Design of the lab-scale flow loop for dynamic foam characterization and cuttings monitoring instrumentation tests has been completed. The construction of the test loop is underway. As part of the technology transport efforts, Advisory Board Meeting with ACTS-JIP industry members has been organized on May 13, 2000.

  7. Making the cut

    Energy Technology Data Exchange (ETDEWEB)

    Mcshannon, G. [Hydra Mining Tools International Ltd. (United Kingdom)

    2006-04-15

    The paper explains how coal mines around the world can benefit from the use of cowless, radial shearer drums. Hydra Mining has designed and manufactured a range of shearer drums to combat problems ranging from dust, frictional ignitions, geological problems or low production rates. This allows the mine operator to maximise production efficiency. The company tailor-makes shearer drums for each longwall face to optimise the cutting performance of every installation. 8 figs.

  8. Cutting Out Continuations

    DEFF Research Database (Denmark)

    Bahr, Patrick; Hutton, Graham

    2016-01-01

    In the field of program transformation, one often transforms programs into continuation-passing style to make their flow of control explicit, and then immediately removes the resulting continuations using defunctionalisation to make the programs first-order. In this article, we show how these two...... transformations can be fused together into a single transformation step that cuts out the need to first introduce and then eliminate continuations. Our approach is calculational, uses standard equational reasoning techniques, and is widely applicable....

  9. Motivation in Beyond Budgeting: A Motivational Paradox?

    DEFF Research Database (Denmark)

    Sandalgaard, Niels; Bukh, Per Nikolaj

    In this paper we discuss the role of motivation in relation to budgeting and we analyse how the Beyond Budgeting model functions compared with traditional budgeting. In the paper we focus on budget related motivation (and motivation in general) and conclude that the Beyond Budgeting model...

  10. Zero-Base Budgeting:; An Institutional Experience.

    Science.gov (United States)

    Alexander, Donald L.; Anderson, Roger C.

    Zero-base budgeting as it is used at Allegany College is described. Zero-based budgeting is defined as a budgeting and planning approach that requires the examination of every item in a budget request as if the request were being proposed for the first time. Budgets (decision packages) are first made up for decision units (i.e., a course for the…

  11. Laboratory administration--capital budgeting.

    Science.gov (United States)

    Butros, F

    1997-01-01

    The process of capital budgeting varies among different health-care institutions. Understanding the concept of present value of money, incremental cash flow statements, and the basic budgeting techniques will enable the laboratory manager to make the rational and logical decisions that are needed in today's competitive health-care environment.

  12. Implementing Site-based Budgeting.

    Science.gov (United States)

    Sielke, Catherine C.

    2001-01-01

    Discusses five questions that must be answered before implementing site-based budgeting: Why are we doing this? What budgeting decisions will be devolved to the school site? How do dollars flow from the central office to the site? Who will be involved at the site? How will accountability be achieved? (Author/PKP)

  13. The CEA budget in 1982

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    In 1982, the amount of the CEA budget will be 13.4 billions French Francs. The main characteristics are the priority for employment and investments. In this budget programs are adapted to fit R and D to the government policy: innovation, industrial valorization and fundamental research especially thermonuclear fusion and in the electronuclear field to safety, reprocessing and radioactive waste management [fr

  14. Cutting forces during turning with variable depth of cut

    Directory of Open Access Journals (Sweden)

    M. Sadílek

    2016-03-01

    The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

  15. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Evren Ozbayoglu; Barkim Demirdal; Paco Vieira; Affonso Lourenco

    1999-10-15

    This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

  16. Vortex cutting in superconductors

    Science.gov (United States)

    Vlasko-Vlasov, Vitalii K.; Koshelev, Alexei E.; Glatz, Andreas; Welp, Ulrich; Kwok, Wai-K.

    2015-03-01

    Unlike illusive magnetic field lines in vacuum, magnetic vortices in superconductors are real physical strings, which interact with the sample surface, crystal structure defects, and with each other. We address the complex and poorly understood process of vortex cutting via a comprehensive set of magneto-optic experiments which allow us to visualize vortex patterns at magnetization of a nearly twin-free YBCO crystal by crossing magnetic fields of different orientations. We observe a pronounced anisotropy in the flux dynamics under crossing fields and the filamentation of induced supercurrents associated with the staircase vortex structure expected in layered cuprates, flux cutting effects, and angular vortex instabilities predicted for anisotropic superconductors. At some field angles, we find formation of the vortex domains following a type-I phase transition in the vortex state accompanied by an abrupt change in the vortex orientation. To clarify the vortex cutting scenario we performed time-dependent Ginzburg-Landau simulations, which confirmed formation of sharp vortex fronts observed in the experiment and revealed a left-handed helical instability responsible for the rotation of vortices. This work was supported by the U.S. Department of Energy, Office of Science, Materials Sciences and Engineering Division.

  17. Climate change and the federal budget. CBO memorandum

    International Nuclear Information System (INIS)

    1998-08-01

    This Congressional Budget Office (CBO) memorandum was prepared at the request of the Senate Committee on the Budget to document current US efforts in the area of global climate change and to review current federal spending programs and tax policies that relate to climate change. The memorandum also describes proposals contained in the President's 1999 budget for funding for those programs and several new tax policies. It should be helpful to policymakers as they consider options to respond to international proposals for reducing the threat of climate change

  18. THE BUDGETING PROCESS IN ROMANIA

    Directory of Open Access Journals (Sweden)

    TURCIN MARIUS CATALIN

    2015-08-01

    Full Text Available This paper presents the stages of the budgeting process in Romania and the institutions involved in its carry out, having regard to the recent legislative amendments in the field. The study describes the importance of some state institutions in achieving the economic and social policy objectives. According to practice, the institution specializing in drafting the budget bill is the Government, who submits the budget bill annually to the Parliament for adopting the national budget, accompanied by the explanatory statement, annexes and interpretative calculations. The preparatory works are fulfilled by the Ministry of Public Finance and in parallel, by the ministries, authorities, local administrations or other public institutions to prepare their own drafts budget.

  19. FLEXIBLE BUDGET OF SPORT COMPETITIONS

    Directory of Open Access Journals (Sweden)

    Dragan Vukasović

    2009-11-01

    Full Text Available Manager of sport competition has right to decide and also to take responsibility for costs, income and financial results. From economic point of wiev flexible budget and planning cost calculations is top management base for analyzing success level of sport competition. Flexible budget is made before sport competition with few output level, where one is always from static plan-master plan. At the end of competition when we have results, we make report of plan executing and we also analyzing plan variances. Results of comparation between achieved and planning level of static budget can be acceptable if achieved level is approximate to budget level or if we analyzing results from gross or net income. Flexible budget become very important in case of world eco- nomic crises

  20. THE BUDGET PROGRAM: ECONOMIC CONTENT AND PRACTICE OF IMPLEMENTATION

    Directory of Open Access Journals (Sweden)

    Iryna Shevchenko

    2017-09-01

    . This will allow timely identification of the probability of non-fulfilment of the budget program and its possible cause but also will allow optimizing cash flows and their managers, will not allow assessing the necessity and expediency of combining several budget programs of one main manager of funds into one program; combining them according to the branch principle by transferring to other main budget holders in accordance with their functions; reducing the number of main budget holders.

  1. Performance Testing of Cutting Fluids

    DEFF Research Database (Denmark)

    Belluco, Walter

    The importance of cutting fluid performance testing has increased with documentation requirements of new cutting fluid formulations based on more sustainable products, as well as cutting with minimum quantity of lubrication and dry cutting. Two sub-problems have to be solved: i) which machining...... tests feature repeatability, reproducibility and sensitivity to cutting fluids, and ii) to what extent results of one test ensure relevance to a wider set of machining situations. The present work is aimed at assessing the range of validity of the different testing methods, investigating correlation...... within the whole range of operations, materials, cutting fluids, operating conditions, etc. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping, and with respect to tool life, cutting forces, chip formation and product quality (dimensional accuracy and surface integrity...

  2. Global Carbon Budget 2016

    Science.gov (United States)

    Quéré, Corinne Le; Andrew, Robbie M.; Canadell, Josep G.; Sitch, Stephen; Korsbakken, Jan Ivar; Peters, Glen P.; Manning, Andrew C.; Boden, Thomas A.; Tans, Pieter P.; Houghton, Richard A.; hide

    2016-01-01

    Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere the global carbon budget is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics, and model estimates and their interpretation by a broad scientific community. We discuss changes compared to previous estimates and consistency within and among components, alongside methodology and data limitations. CO2 emissions from fossil fuels and industry (EFF) are based on energy statistics and cement production data, respectively, while emissions from land-use change (ELUC), mainly deforestation, are based on combined evidence from land-cover change data, fire activity associated with deforestation, and models. The global atmospheric CO2 concentration is measured directly and its rate of growth (GATM) is computed from the annual changes in concentration. The mean ocean CO2 sink (SOCEAN) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in SOCEAN is evaluated with data products based on surveys of ocean CO2 measurements. The global residual terrestrial CO2 sink (SLAND) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models. We compare the mean land and ocean fluxes and their variability to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as +/- 1(sigma), reflecting the current capacity to characterize the annual estimates of each component of the global carbon budget. For the last decade available (2006-2015), EFF was 9

  3. Global Carbon Budget 2016

    Science.gov (United States)

    Le Quéré, Corinne; Andrew, Robbie M.; Canadell, Josep G.; Sitch, Stephen; Korsbakken, Jan Ivar; Peters, Glen P.; Manning, Andrew C.; Boden, Thomas A.; Tans, Pieter P.; Houghton, Richard A.; Keeling, Ralph F.; Alin, Simone; Andrews, Oliver D.; Anthoni, Peter; Barbero, Leticia; Bopp, Laurent; Chevallier, Frédéric; Chini, Louise P.; Ciais, Philippe; Currie, Kim; Delire, Christine; Doney, Scott C.; Friedlingstein, Pierre; Gkritzalis, Thanos; Harris, Ian; Hauck, Judith; Haverd, Vanessa; Hoppema, Mario; Klein Goldewijk, Kees; Jain, Atul K.; Kato, Etsushi; Körtzinger, Arne; Landschützer, Peter; Lefèvre, Nathalie; Lenton, Andrew; Lienert, Sebastian; Lombardozzi, Danica; Melton, Joe R.; Metzl, Nicolas; Millero, Frank; Monteiro, Pedro M. S.; Munro, David R.; Nabel, Julia E. M. S.; Nakaoka, Shin-ichiro; O'Brien, Kevin; Olsen, Are; Omar, Abdirahman M.; Ono, Tsuneo; Pierrot, Denis; Poulter, Benjamin; Rödenbeck, Christian; Salisbury, Joe; Schuster, Ute; Schwinger, Jörg; Séférian, Roland; Skjelvan, Ingunn; Stocker, Benjamin D.; Sutton, Adrienne J.; Takahashi, Taro; Tian, Hanqin; Tilbrook, Bronte; van der Laan-Luijkx, Ingrid T.; van der Werf, Guido R.; Viovy, Nicolas; Walker, Anthony P.; Wiltshire, Andrew J.; Zaehle, Sönke

    2016-11-01

    Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere - the "global carbon budget" - is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics, and model estimates and their interpretation by a broad scientific community. We discuss changes compared to previous estimates and consistency within and among components, alongside methodology and data limitations. CO2 emissions from fossil fuels and industry (EFF) are based on energy statistics and cement production data, respectively, while emissions from land-use change (ELUC), mainly deforestation, are based on combined evidence from land-cover change data, fire activity associated with deforestation, and models. The global atmospheric CO2 concentration is measured directly and its rate of growth (GATM) is computed from the annual changes in concentration. The mean ocean CO2 sink (SOCEAN) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in SOCEAN is evaluated with data products based on surveys of ocean CO2 measurements. The global residual terrestrial CO2 sink (SLAND) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models. We compare the mean land and ocean fluxes and their variability to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as ±1σ, reflecting the current capacity to characterise the annual estimates of each component of the global carbon budget. For the last decade available (2006-2015), EFF was 9

  4. CALCULATION OF LASER CUTTING COSTS

    OpenAIRE

    Bogdan Nedic; Milan Eric; Marijana Aleksijevic

    2016-01-01

    The paper presents description methods of metal cutting and calculation of treatment costs based on model that is developed on Faculty of mechanical engineering in Kragujevac. Based on systematization and analysis of large number of calculation models of cutting with unconventional methods, mathematical model is derived, which is used for creating a software for calculation costs of metal cutting. Software solution enables resolving the problem of calculating the cost of laser cutting, compar...

  5. Remote Laser Cutting of CFRP: Improvements in the Cut Surface

    Science.gov (United States)

    Stock, Johannes; Zaeh, Michael F.; Conrad, Markus

    In the automotive industry carbon fibre reinforced plastics (CFRP) are considered as a future key material to reduce the weight of the vehicle. Therefore, capable production techniques are required to process this material in mass industry. E.g., state of the art methods for cutting are limited by the high tool wear or the feasible feed rate. Laser cutting processes are still under investigation. This paper presents detailed new studies on remote laser cutting of CFRP focusing on the influence of the material properties and the quality of the cut surface. By adding light absorbing soot particles to the resin of the matrix, the cutting process is improved and fewer defects emerge.

  6. Cutting agents for special metals

    International Nuclear Information System (INIS)

    Sugito, Seiji; Sakakibara, Fumi

    1979-01-01

    The quantity of use of special metals has increased year after year in the Plasma Research Institute, Nagoya University, with the development of researches on plasma and nuclear fusion. Most of these special metals are hard to cut, and in order to secure the surface smoothness and dimensional accuracy, considerable efforts are required. The method of experiment is as follows: cutting agents salt water and acetone, rape-seed oil, sulfide and chloride oil and water soluble cutting oil W grade 3; metals to be cut niobium, molybdenum, tantalum, titanium and tungsten; cutting conditions cutting speed 4.7 to 90 m/min, feed 0.07 to 0.2 mm/rev, depth of cut 0.1 to 0.4 mm, tool cemented carbide bit. Chemicals such as tetrachloromethane and trichloroethane give excellent cutting performance, but the toxicity is intense and the stimulative odor exists, accordingly they are hard to use practically. Cutting was easier when the salt water added with acetone was used than the case of rape-seed oil, but salt water is corrosive. Recently, the machining of molybdenum has been often carried out, and the water soluble cutting oil was the best. It is also good for cutting stainless steel, and its lubricating property is improved by adding some additives such as sulfur, chlorine, phosphorus and molybdenum disulfide. However after cutting with it, washing is required. (Kako, I.)

  7. Global Carbon Budget 2015

    Science.gov (United States)

    Le Quéré, C.; Moriarty, R.; Andrew, R. M.; Canadell, J. G.; Sitch, S.; Korsbakken, J. I.; Friedlingstein, P.; Peters, G. P.; Andres, R. J.; Boden, T. A.; Houghton, R. A.; House, J. I.; Keeling, R. F.; Tans, P.; Arneth, A.; Bakker, D. C. E.; Barbero, L.; Bopp, L.; Chang, J.; Chevallier, F.; Chini, L. P.; Ciais, P.; Fader, M.; Feely, R. A.; Gkritzalis, T.; Harris, I.; Hauck, J.; Ilyina, T.; Jain, A. K.; Kato, E.; Kitidis, V.; Klein Goldewijk, K.; Koven, C.; Landschützer, P.; Lauvset, S. K.; Lefèvre, N.; Lenton, A.; Lima, I. D.; Metzl, N.; Millero, F.; Munro, D. R.; Murata, A.; Nabel, J. E. M. S.; Nakaoka, S.; Nojiri, Y.; O'Brien, K.; Olsen, A.; Ono, T.; Pérez, F. F.; Pfeil, B.; Pierrot, D.; Poulter, B.; Rehder, G.; Rödenbeck, C.; Saito, S.; Schuster, U.; Schwinger, J.; Séférian, R.; Steinhoff, T.; Stocker, B. D.; Sutton, A. J.; Takahashi, T.; Tilbrook, B.; van der Laan-Luijkx, I. T.; van der Werf, G. R.; van Heuven, S.; Vandemark, D.; Viovy, N.; Wiltshire, A.; Zaehle, S.; Zeng, N.

    2015-12-01

    Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and a methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics, and model estimates and their interpretation by a broad scientific community. We discuss changes compared to previous estimates as well as consistency within and among components, alongside methodology and data limitations. CO2 emissions from fossil fuels and industry (EFF) are based on energy statistics and cement production data, while emissions from land-use change (ELUC), mainly deforestation, are based on combined evidence from land-cover-change data, fire activity associated with deforestation, and models. The global atmospheric CO2 concentration is measured directly and its rate of growth (GATM) is computed from the annual changes in concentration. The mean ocean CO2 sink (SOCEAN) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in SOCEAN is evaluated with data products based on surveys of ocean CO2 measurements. The global residual terrestrial CO2 sink (SLAND) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models forced by observed climate, CO2, and land-cover change (some including nitrogen-carbon interactions). We compare the mean land and ocean fluxes and their variability to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as ±1σ, reflecting the current capacity to characterise the annual estimates of each component of the global

  8. Can You Cut It?

    DEFF Research Database (Denmark)

    Kjær, Tina; Lillelund, Christoffer Bredo; Moth-Poulsen, Mie

    2017-01-01

    The advent of affordable virtual reality (VR) displays and 360◦ video cameras has sparked an interest in bringing cinematic experiences from the screen and into VR. However, it remains uncertain whether traditional approaches to filmmaking can be directly applied to cinematic VR. Historically......’ sense of disorientation and their ability to follow the story, during exposure to fictional 360◦ films experienced using a head-mounted display. The results revealed no effects of increased cut frequency which leads us to conclude that editing need not pose a problem in relation to cinematic VR, as long...

  9. Cutting the Cord-2

    Science.gov (United States)

    2004-01-01

    This animation shows the view from the rear hazard avoidance cameras on the Mars Exploration Rover Spirit as the rover turns 45 degrees clockwise. This maneuver is the first step in a 3-point turn that will rotate the rover 115 degrees to face west. The rover must make this turn before rolling off the lander because airbags are blocking it from exiting from the front lander petal. Before this crucial turn took place, engineers instructed the rover to cut the final cord linking it to the lander. The turn took around 30 minutes to complete.

  10. Cutting the Cord

    Science.gov (United States)

    2004-01-01

    This animation shows the view from the front hazard avoidance cameras on the Mars Exploration Rover Spirit as the rover turns 45 degrees clockwise. This maneuver is the first step in a 3-point turn that will rotate the rover 115 degrees to face west. The rover must make this turn before rolling off the lander because airbags are blocking it from exiting off the front lander petal. Before this crucial turn could take place, engineers instructed the rover to cut the final cord linking it to the lander. The turn took around 30 minutes to complete.

  11. BUDGET IN DANGER : OUR LETTER TO THE MINISTERS

    CERN Multimedia

    STAFF ASSOCIATION

    2010-01-01

    In edition no. 104 of Echo we told you about the Finance Committee meeting which took place on Wednesday 16 June and the tense atmosphere that reigned during this meeting. Echoing the alarming news from most of our countries (budget cuts, restrictions, reforms), CERN’s global budget is indeed under pressure. This is extremely serious. How can we carry out our mission if our Member States do not give us the means? Basic research cannot progress with budget cuts. The Management tried to make this understood at the meeting, however, most delegations could not or would not see reason. Refusing to sit idly by, the Staff Association decided to act immediately. It sent a letter to all ministers in the twenty Member States concerned by CERN and its financing. A copy was also sent to all Finance Committee and Council delegates. We thus hope to help convince all our Member States that it is essential that they continue to invest in basic research, a breeding ground for new ideas and at the roo...

  12. Budgeting in an imaging Department

    International Nuclear Information System (INIS)

    Nyalla, A. M.

    2006-01-01

    budgeting form an integral part of an imaging department. It is a plan to cope with necessary expenses in the future. It involves identifying the needs and income sources required to cover the needs.Covers specific items and time-usually a year and is expressed in monetary terms. The micro budget is put in the macro budget of the hospital. defines financial support for the department. Considers: a fiscal year, projection of patients, types of examinations, type of equipment, monetary exchange, and inflation rate

  13. Leptogenesis: The other cuts

    International Nuclear Information System (INIS)

    Garbrecht, Bjoern

    2011-01-01

    For standard leptogenesis from the decay of singlet right-handed neutrinos, we derive source terms for the lepton asymmetry that are present in a finite density background but absent in the vacuum. These arise from cuts through the vertex correction to the decay asymmetry, where in the loop either the Higgs boson and the right-handed neutrino or the left-handed lepton and the right-handed neutrino are simultaneously on-shell. We evaluate the source terms numerically and use them to calculate the lepton asymmetry for illustrative points in parameter space, where we consider only two right-handed neutrinos for simplicity. Compared to calculations where only the standard cut through the propagators of left-handed lepton and Higgs boson is included, sizable corrections arise when the masses of the right-handed neutrinos are of the same order, but the new sources are found to be most relevant when the decaying right-handed neutrino is heavier than the one in the loop. In that situation, they can yield the dominant contribution to the lepton asymmetry.

  14. CO2 laser cutting

    CERN Document Server

    Powell, John

    1998-01-01

    The laser has given manufacturing industry a new tool. When the laser beam is focused it can generate one of the world's most intense energy sources, more intense than flames and arcs, though similar to an electron beam. In fact the intensity is such that it can vaporise most known materials. The laser material processing industry has been growing swiftly as the quality, speed and new manufacturing possibilities become better understood. In the fore of these new technologies is the process of laser cutting. Laser cutting leads because it is a direct process substitu­ tion and the laser can usually do the job with greater flexibility, speed and quality than its competitors. However, to achieve these high speeds with high quality con­ siderable know how and experience is required. This information is usually carefully guarded by the businesses concerned and has to be gained by hard experience and technical understanding. Yet in this book John Powell explains in lucid and almost non­ technical language many o...

  15. Melt Flow and Energy Limitation of Laser Cutting

    Directory of Open Access Journals (Sweden)

    Pavel Hudeček

    2016-01-01

    Full Text Available Laser technology is a convertible technology for plenty of parts in most materials. Laser material processing for industrial manufacturing applications is today a widespread procedure for welding, cutting, marking and micro machining of metal and plastic parts and components. Involvement and support this huge mass-production industry of laser cutting, new technology and dry-process using lasers were and are being actively developed. Fundamentally, industrial laser cutting or other applications on industry should satisfy the four key practical application issues including “Quality or Performance”, “Throughput or Speed”, “Cost or Total Ownership Cost”, and “Reliability”. Laser requires for examples several complicated physical factors to be resolved including die strength to be enable good wire-bonding and survival of severe cycling test, clean cutting wall surface, good cutting of direct attach film, and proper speed of cutting for achieving economy of throughput. Some example of maximum cutting rate, wherewith is normally limited laser energy, cutting speed is depend on type laser, different of cutting with one laser beam and beam pattern and applied laser power/material thickness will be introduced in this paper.

  16. GEWEX Surface Radiation Budget (SRB)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NASA/GEWEX Surface Radiation Budget (SRB) Release-3.0 data sets contains global 3-hourly, daily, monthly/3-hourly, and monthly averages of surface and top-of...

  17. Congress smiles on research budgets

    CERN Multimedia

    Reichhardt, T

    1998-01-01

    Congress has agreed to match or exceed most of the funding requests for the major science agencies requested by President Clinton in February. Many of them will receive their largest budget increases for years (11 paragraphs).

  18. Identification and characterization of a novel Cut family cDNA that encodes human copper transporter protein CutC

    International Nuclear Information System (INIS)

    Li Jixi; Ji Chaoneng; Chen Jinzhong; Yang Zhenxing; Wang Yijing; Fei, Xiangwei; Zheng Mei; Gu Xing; Wen Ge; Xie Yi; Mao Yumin

    2005-01-01

    Copper is an essential heavy metal trace element that plays important roles in cell physiology. The Cut family was associated with the copper homeostasis and involved in several important metabolisms, such as uptake, storage, delivery, and efflux of copper. In this study, a novel Cut family cDNA was isolated from the human fetal brain library, which encodes a 273 amino acid protein with a molecular mass of about 29.3 kDa and a calculated pI of 8.17. It was named hCutC (human copper transporter protein CutC). The ORF of hCutC gene was cloned into pQE30 vector and expressed in Escherichia coli M15. The secreted hCutC protein was purified to a homogenicity of 95% by using the Ni-NTA affinity chromatography. RT-PCR analysis showed that the hCutC gene expressed extensively in human tissues. Subcellular location analysis of hCutC-EGFP fusion protein revealed that hCutC was distributed to cytoplasm of COS-7 cells, and both cytoplasm and nucleus of AD293 cells. The results suggest that hCutC may be one shuttle protein and play important roles in intracellular copper trafficking

  19. Necrosis cutánea severa por picadura de raya en el miembro inferior: presentación de un caso y revisión de la literatura Stingray injury causing severe cutaneous necrosis: case report and literature review

    Directory of Open Access Journals (Sweden)

    M.A. Hoyos Franco

    2009-12-01

    Full Text Available El propósito de este trabajo es presentar nuestra experiencia con un caso de picadura por raya en el área maleolar interna del pie derecho de un hombre de 25 años, que sufrió mientras pescaba. Inicialmente presentó dolor urente, seguido de edema severo, con necrosis de la piel suprayacente. Ingresa a nuestra institución 24 horas después y con edema, eritema y secreción purulenta en el sitio afectado. Se inicia tratamiento con antibióticos sistémicos y se realizan tres lavados y desbridamientos en días subsecuentes. Evolucionó con solución de continuidad y exposición ósea sobre el maléolo interno en un área de 7 x 5 cms que se cubrió con un colgajo safeno interno de flujo reverso que evolucionó satisfactoriamente. Las lesiones ocasionadas por la picadura de raya (Myliobatidae son escasamente referidas en Cirugía Plástica, pues la lesión tisular severa de las extremidades es poco frecuente. Revisamos la fisiopatología, los tipos de lesiones que se producen y los principios de tratamiento.The purpose of this paper is to present our experience with one case of stingray injury, in a 25 years old man, while he was fishing, compromising his right feet at the internal malleolus. At the beginning he had severe pain, and during the first hours after the accident progressive edema was evident. He arrived to our hospital 24 hours later, when purulent discharge and eritem was obvious. Intravenous antibiotics were initiated and three surgical debridements where performed during the following week. After the process was complete, a soft tissue defect was created on the internal malleolus (7 x 5 cm. Reconstruction was achieved using a reverse internal saphenous flap that evolved satisfactorily. Severe skin injuries caused by stingrays (Myliobatidae have been reported shortly in plastic surgery literature, because these lesions usually heal without surgical procedures. We review skin injury physiopathology, showing the different kind of

  20. The Cutting Process, Chips and Cutting Forces in Machining CFRP

    DEFF Research Database (Denmark)

    Koplev, A.; Lystrup, Aage; Vorm, T.

    1983-01-01

    The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, ‘quick-stop’ experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface...... is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool....

  1. Aerodynamic Interactions During Laser Cutting

    Science.gov (United States)

    Fieret, J.; Terry, M. J.; Ward, B. A.

    1986-11-01

    Most laser cutting systems utilise a gas jet to remove molten or vaporised material from the kerf. The speed, economy and quality of the cut can be strongly dependent on the aerodynamic conditions created by the nozzle, workpiece proximity and kerf shape. Adverse conditions can be established that may lead to an unwelcome lack of reproducibility of cut quality. Relatively low gas nozzle pressures can result in supersonic flow in the jet with its associated shock fronts. When the nozzle is placed at conventional distances (1-2mm) above the workpiece, the force exerted by the gas on the workpiece and the cut products (the cutting pressure) can be significantly less than the nozzle pressure. Higher cutting pressures can be achieved by increasing the height of the nozzle above the workpiece, to a more damage resistant zone, provided that the shock structure of the jet is taken into account. Conventional conical nozzles with circular exits can be operated with conditions that will result in cutting pressures up to 3 Bar (g) in the more distant zone. At higher pressures in circular tipped nozzles the cutting pressure in this zone decays to inadequate levels. Investigations of a large number of non-circular nozzle tip shapes have resulted in the selection of a few specific shapes that can provide cutting pressures in excess of 6 Bar(g) at distances of 4 to 7mm from the nozzle tip. Since there is a strong correlation between cutting pressure and the speed and quality of laser cutting, the paper describes the aerodynamic requirements for achieving the above effects and reports the cutting results arising from the different nozzle designs and conditions. The results of the work of other investigators, who report anomalous laser cutting results, will be examined and reviewed in the light of the above work.

  2. Comparative study of 0° X-cut and Y + 36°-cut lithium niobate high-voltage sensing

    Science.gov (United States)

    Patel, N.; Branch, D. W.; Schamiloglu, E.; Cular, S.

    2015-08-01

    A comparison study between Y + 36° and 0° X-cut lithium niobate (LiNbO3) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y + 36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y + 36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz-100 kHz. Using the same conditions as the Y + 36° cut, the 0° X-cut crystal sensed a shift of 10-273 ps for DC voltages and 189-813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250-2 ns and the Y + 36°-cut crystal sensed a time shift of 0.115-1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. When the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment.

  3. Comparative study of 0° X-cut and Y + 36°-cut lithium niobate high-voltage sensing

    International Nuclear Information System (INIS)

    Patel, N.; Branch, D. W.; Cular, S.; Schamiloglu, E.

    2015-01-01

    A comparison study between Y + 36° and 0° X-cut lithium niobate (LiNbO 3 ) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y + 36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y + 36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz–100 kHz. Using the same conditions as the Y + 36° cut, the 0° X-cut crystal sensed a shift of 10–273 ps for DC voltages and 189–813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250–2 ns and the Y + 36°-cut crystal sensed a time shift of 0.115–1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. When the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment

  4. Skin Cut Construction

    DEFF Research Database (Denmark)

    2017-01-01

    projects - among others - from ARC are included: Soft Structures builds upon of a series of experimental use of EPS hot wire cutting, where the EPS eventually act as formwork for concrete casting. The processing of the EPS is distinct and delimited by the behaviour and form of both the robot and tool...... of steel and concrete makes it a reliable approach to many challenges in the realisation of buildings. Rebar Inside Out attempts to rethink the possibilities of the reinforced concrete composite starting from its inside. This means starting with the reinforcing steel, the production and shaping of this......, and then through that process build a workflow for the production of the concrete composite. It also means letting the steel out of the concrete, thereby positioning the two materials in a transnational relationship between steel construction and concrete composite....

  5. A budget impact analysis of Spiromax® compared with Turbuhaler® for the treatment of moderate to severe asthma: a potential improvement in the inhalation technique to strengthen medication adherence could represent savings for the Spanish Healthcare System and five Spanish regions

    Directory of Open Access Journals (Sweden)

    Darbà J

    2016-09-01

    Full Text Available Josep Darbà,1 Gabriela Ramírez,2 Juan L García-Rivero,3 Sagrario Mayoralas-Alises,4 José Francisco Pascual,5 Albert Roger,6 Diego Vargas,7 Adi Bijedic8 1Department of Economics, Universitat de Barcelona, 2BCN Health Economics & Outcomes Research SL, 3Hospital Laredo, Cantabria, 4Hospital Ramón y Cajal, Madrid, 5Hospital General Universitario de Alicante, Alicante, 6Hospital Universitario Germans Trias i Pujol, Barcelona, 7Hospital de Alta Resolución el Toyo, Andalusia, 8Market Access and HEOR Department, TEVA Pharmaceutical, Madrid, Spain Objective: To assess the economic impact of the introduction of DuoResp® Spiromax® by focusing on a potential improvement in the inhalation technique to strengthen medication adherence for the treatment of moderate to severe asthmatics in Spain and five Spanish regions including Andalusia, Catalonia, Galicia, Madrid, and Valencia.Methods: A 4-year budget impact model was developed for the period 2015–2018 from the Spanish Healthcare System perspective. Budesonide–formoterol fixed-dose combination delivered by Turbuhaler® was considered to be the most appropriate comparator for assessing the budget impact with the introduction of DuoResp® Spiromax®. National and regional data on asthma prevalence were obtained from the literature. Input parameters on health care resources were obtained by consulting experts from different Spanish hospitals. Resources used included medical visits, emergency room visits, and hospitalizations. The average numbers of primary care and specialist visits per year were also gathered. Based on health care resource use per patient, the total treatment cost per patient was estimated.Results: The population with moderate to severe asthma treated with budesonide–formoterol fixed-dose combinations delivered by Turbuhaler® in 2015 was estimated to be 166,985 in Spain. Region-specific prevalence data resulted in 25,081, 12,392, 16,097, 17,829, and 15,148 patients in Andalusia

  6. Respiration rate and ethylene production of fresh cut lettuce as affected by cutting grade

    Directory of Open Access Journals (Sweden)

    J. MARTÍNEZ

    2008-12-01

    Full Text Available For designing optimal polymeric films for modified atmosphere packaging of whole heads as well as for minimally fresh processed (fresh-cut Iceberg lettuce ‘Coolguard’, the effect of several cutting grades on respiration rate (RR and ethylene production at 5ºC was studied. According to common industrial practices cutting grades less than 0.5 cm, between 0.5 and 1 cm, and 2 cm length were selected. Results from four experiments were compared to those obtained for whole heads in which a homogenous range of 6 to 8 ml CO2 kg-1 h-1 in RR was found. Compared to whole heads, in fresh-cut lettuce the RR was 2-fold higher. The lowest cutting grade showed the highest respiration rate, and no significant differences in RR among lettuce pieces of intermediate and the highest grades were found. No ethylene production was detected in whole heads, while in minimally processed lettuce pieces only traces were found. For avoiding risks of anaerobic respiration and excessive CO2 levels within packages containing fresh-cut lettuce pieces lower than 0.5 cm length, films with relatively high O2 permeability like standard polypropylene or low-density polyethylene must be selected.;

  7. Cuts will stop time for a year at Big Bang laboratory

    CERN Multimedia

    Henderson, Mark

    2010-01-01

    "The nuclear research laboratory that develped the world's most powerful particle accelerator has become the latest victim of Europe's financial crisis. All the accelerator experiments at Cern, the European Organisation for Nuclear Research, are to be closed for a year in 2012, after Britain led demands by financially troubled member states for a 215 million pounds cut to its budget" (1 page)

  8. Cycle-Based Budgeting Toolkit: A Primer

    Science.gov (United States)

    Yan, Bo

    2016-01-01

    At the core, budgeting is about distributing and redistributing limited financial resources for continuous improvement. Incremental budgeting is limited in achieving the goal due to lack of connection between outcomes and budget decisions. Zero-based budgeting fills the gap, but is cumbersome to implement, especially for large urban school…

  9. 42 CFR 457.140 - Budget.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Budget. 457.140 Section 457.140 Public Health... Child Health Insurance Programs and Outreach Strategies § 457.140 Budget. The State plan, or plan amendment that has a significant impact on the approved budget, must include a budget that describes the...

  10. Under Secretary of Defense (Comptroller) > Budget

    Science.gov (United States)

    functionalStatements OUSD(C) History FMR Budget Materials Budget Execution Financial Management Improving Financial Performance Reports Regulations Press Release | Budget Briefing | Transcripts: David L. Norquist, Under PDF document. Click on Excel icon for Excel document Overview - FY2019 Defense Budget Performance

  11. 24 CFR 968.225 - Budget revisions.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Budget revisions. 968.225 Section... Fewer Than 250 Units) § 968.225 Budget revisions. (a) A PHA shall not incur any modernization cost in excess of the total HUD-approved CIAP budget. A PHA shall submit a budget revision, in a form prescribed...

  12. 7 CFR 1744.64 - Budget adjustment.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Budget adjustment. 1744.64 Section 1744.64... Disbursement of Funds § 1744.64 Budget adjustment. (a) If more funds are required than are available in a budget account, the borrower may request RUS's approval of a budget adjustment to use funds from another...

  13. Semantic Versus Syntactic Cutting Planes

    OpenAIRE

    Filmus, Yuval; Hrubeš, Pavel; Lauria, Massimo

    2016-01-01

    In this paper, we compare the strength of the semantic and syntactic version of the cutting planes proof system. First, we show that the lower bound technique of Pudlák applies also to semantic cutting planes: the proof system has feasible interpolation via monotone real circuits, which gives an exponential lower bound on lengths of semantic cutting planes refutations. Second, we show that semantic refutations are stronger than syntactic ones. In particular, we give a formula for whic...

  14. Laser Cutting of Different Materials

    Directory of Open Access Journals (Sweden)

    Kadir ÇAVDAR

    2013-08-01

    Full Text Available In this paper; in general potential developments and trends of a particular machining field by extensively evaluating present studies of laser beam machining have been discussed. As it is indicated below, technical literatures have been subsumed under five major headlines: Experimental studies, reviews, optimization researches of the cutting parameters, theoretical modelling studies of laser beam cutting and academic studies relating to laser cutting

  15. Generic Advertising Optimum Budget for Iran’s Milk Industry

    Directory of Open Access Journals (Sweden)

    H. Shahbazi

    2016-05-01

    Full Text Available Introduction One of the main targets of planners, decision makers and governments is increasing society health with promotion and production of suitable and healthy food. One of the basic commodities that have important role in satisfaction of required human food is milk. So, some part of government and producer healthy budget allocate to milk consumption promotion by using generic advertising. If effectiveness of advertising budget on profitability is more, producer will have more willing to spend for advertising. Determination of optimal generic advertising budget is one of important problem in managerial decision making in producing firm as well as increase in consumption and profit and decrease in wasting and non-optimality of budget. Materials and Methods: In this study, optimal generic advertising budget intensity index (advertising budget share of production cost was estimated under two different scenarios by using equilibrium replacement model. In equilibrium replacement model, producer surplus are maximized in respect to generic advertising in retail level. According to market where two levels of farm and processing before retail exist and there is trade in farm and retail level, we present different models. Fixed and variable proportion hypothesis is another one. Finally, eight relations are presented for determination of milk generic advertising optimum budget. So, we use data from several resources such as previous studies, national (Iran Static center and international institute (Fao formal data and own estimation. Because there are several estimations in previous studies, we identify some scenarios (in two general scenarios for calculation of milk generic advertising optimum budget. Results and Discussion: Estimation of milk generic advertising optimum budget in scenario 1 shows that in case of one market level, fixed supplies and no trade, optimum budget is 0.4672539 percent. In case of one market level and no trade, optimum

  16. Cross-Cutting public policy requirements applicable to federal grants

    Science.gov (United States)

    There are cross-cutting public policy requirements applicable to Federal grants, including those awarded by the EPA. Some of those requirements are included here because they have been part of appropriations acts for several years without change.

  17. Latest development of laser cutting

    OpenAIRE

    Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Goppold, Cindy; Baumann, Robert; Fürst, Andreas; Rose, Michael; Pinder, Thomas; Mahrle, Achim; Beyer, Eckhard

    2016-01-01

    Laser cutting was one of the first applications of laser material processing. Today, laser cutting is the most widespread application among laser material processing besides laser marking. Meanwhile, nearly each material can be cut by means of a laser, in particular since ultra short pulse lasers are available in the power range of up to 100 W. The to be cut material can come with thicknesses from a few microns till tens of millimeters as flat stock or as free form shapes. The paper will conc...

  18. CALCULATION OF LASER CUTTING COSTS

    Directory of Open Access Journals (Sweden)

    Bogdan Nedic

    2016-09-01

    Full Text Available The paper presents description methods of metal cutting and calculation of treatment costs based on model that is developed on Faculty of mechanical engineering in Kragujevac. Based on systematization and analysis of large number of calculation models of cutting with unconventional methods, mathematical model is derived, which is used for creating a software for calculation costs of metal cutting. Software solution enables resolving the problem of calculating the cost of laser cutting, comparison' of costs made by other unconventional methods and provides documentation that consists of reports on estimated costs.

  19. The prevalence of Beyond Budgeting in Denmark

    DEFF Research Database (Denmark)

    Sandalgaard, Niels

      The annual budget has been criticised in recent years. The critics claim, among other things, that the annual budget is not suitable for today's business environment, that annual budgets stimulate dysfunctional behaviour and furthermore that the use of budgets is too costly. This paper examines...... this critique as well as the current status of the traditional annual budget in a contingency perspective by using data from a survey among the largest Danish companies. The conclusion is that only 4% of the companies claim to have abandoned the traditional, annual budget, 2% have decided or are in the process...... of doing so and 11% are considering abandoning it. These "Beyond Budgeting" companies are more critical towards the traditional budget than other companies. The study also shows that the critical attitude towards annual budgets as well as the decision of abandoning the budget cannot be associated...

  20. A scalable platform for biomechanical studies of tissue cutting forces

    International Nuclear Information System (INIS)

    Valdastri, P; Tognarelli, S; Menciassi, A; Dario, P

    2009-01-01

    This paper presents a novel and scalable experimental platform for biomechanical analysis of tissue cutting that exploits a triaxial force-sensitive scalpel and a high resolution vision system. Real-time measurements of cutting forces can be used simultaneously with accurate visual information in order to extract important biomechanical clues in real time that would aid the surgeon during minimally invasive intervention in preserving healthy tissues. Furthermore, the in vivo data gathered can be used for modeling the viscoelastic behavior of soft tissues, which is an important issue in surgical simulator development. Thanks to a modular approach, this platform can be scaled down, thus enabling in vivo real-time robotic applications. Several cutting experiments were conducted with soft porcine tissues (lung, liver and kidney) chosen as ideal candidates for biopsy procedures. The cutting force curves show repeated self-similar units of localized loading followed by unloading. With regards to tissue properties, the depth of cut plays a significant role in the magnitude of the cutting force acting on the blade. Image processing techniques and dedicated algorithms were used to outline the surface of the tissues and estimate the time variation of the depth of cut. The depth of cut was finally used to obtain the normalized cutting force, thus allowing comparative biomechanical analysis

  1. Effect of Moisture Content of Paper Material on Laser Cutting

    Science.gov (United States)

    Stepanov, Alexander; Saukkonen, Esa; Piili, Heidi; Salminen, Antti

    Laser technology has been used in industrial processes for several decades. The most advanced development and implementation took place in laser welding and cutting of metals in automotive and ship building industries. However, there is high potential to apply laser processing to other materials in various industrial fields. One of these potential fields could be paper industry to fulfill the demand for high quality, fast and reliable cutting technology. Difficulties in industrial application of laser cutting for paper industry are associated to lack of basic information, awareness of technology and its application possibilities. Nowadays possibilities of using laser cutting for paper materials are widened and high automation level of equipment has made this technology more interesting for manufacturing processes. Promising area of laser cutting application at paper making machines is longitudinal cutting of paper web (edge trimming). There are few locations at a paper making machine where edge trimming is usually done: wet press section, calender or rewinder. Paper web is characterized with different moisture content at different points of the paper making machine. The objective of this study was to investigate the effect of moisture content of paper material on laser cutting parameters. Effect of moisture content on cellulose fibers, laser absorption and energy needed for cutting is described as well. Laser cutting tests were carried out using CO2 laser.

  2. Mean-Reverting Portfolio With Budget Constraint

    Science.gov (United States)

    Zhao, Ziping; Palomar, Daniel P.

    2018-05-01

    This paper considers the mean-reverting portfolio design problem arising from statistical arbitrage in the financial markets. We first propose a general problem formulation aimed at finding a portfolio of underlying component assets by optimizing a mean-reversion criterion characterizing the mean-reversion strength, taking into consideration the variance of the portfolio and an investment budget constraint. Then several specific problems are considered based on the general formulation, and efficient algorithms are proposed. Numerical results on both synthetic and market data show that our proposed mean-reverting portfolio design methods can generate consistent profits and outperform the traditional design methods and the benchmark methods in the literature.

  3. Voting suffrage and the political budget cycle: Evidence from the London Metropolitan Boroughs 1902-1937.

    Science.gov (United States)

    Aidt, Toke S; Mooney, Graham

    2014-04-01

    We study the opportunistic political budget cycle in the London Metropolitan Boroughs between 1902 and 1937 under two different suffrage regimes: taxpayer suffrage (1902-1914) and universal suffrage (1921-1937). We argue and find supporting evidence that the political budget cycle operates differently under the two types of suffrage. Taxpayer suffrage, where the right to vote and the obligation to pay local taxes are linked, encourages demands for retrenchment and the political budget cycle manifests itself in election year tax cuts and savings on administration costs. Universal suffrage, where all adult residents can vote irrespective of their taxpayer status, creates demands for productive public services and the political budget cycle manifests itself in election year hikes in capital spending and a reduction in current spending.

  4. Voting suffrage and the political budget cycle: Evidence from the London Metropolitan Boroughs 1902–1937

    Science.gov (United States)

    Aidt, Toke S.; Mooney, Graham

    2014-01-01

    We study the opportunistic political budget cycle in the London Metropolitan Boroughs between 1902 and 1937 under two different suffrage regimes: taxpayer suffrage (1902–1914) and universal suffrage (1921–1937). We argue and find supporting evidence that the political budget cycle operates differently under the two types of suffrage. Taxpayer suffrage, where the right to vote and the obligation to pay local taxes are linked, encourages demands for retrenchment and the political budget cycle manifests itself in election year tax cuts and savings on administration costs. Universal suffrage, where all adult residents can vote irrespective of their taxpayer status, creates demands for productive public services and the political budget cycle manifests itself in election year hikes in capital spending and a reduction in current spending. PMID:25843984

  5. Metal Cutting for Large Component Removal

    International Nuclear Information System (INIS)

    Hulick, Robert M.

    2008-01-01

    Decommissioning of commercial nuclear power plants presents technological challenges. One major challenge is the removal of large components mainly consisting of the reactor vessel, steam generators and pressurizer. In order to remove and package these large components nozzles must be cut from the reactor vessel to precise tolerances. In some cases steam generators must be segmented for size and weight reduction. One innovative technology that has been used successfully at several commercial nuclear plant decommissioning is diamond wire sawing. Diamond wire sawing is performed by rotating a cable with diamond segments attached using a flywheel approximately 24 inches in diameter driven remotely by a hydraulic pump. Tension is provided using a gear rack drive which also takes up the slack in the wire. The wire is guided through the use of pulleys keeps the wire in a precise location. The diamond wire consists of 1/4 inch aircraft cable with diamond beads strung over the cable separated by springs and brass crimps. Standard wire contains 40 diamond beads per meter and can be made to any length. Cooling the wire and controlling the spread of contamination presents significant challenges. Under normal circumstances the wire is cooled and the cutting kerf cleaned by using water. In some cases of reactor nozzle cuts the use of water is prohibited because it cannot be controlled. This challenge was solved by using liquid Carbon Dioxide as the cooling agent. The liquid CO 2 is passed through a special nozzle which atomizes the liquid into snowflakes which is introduced under pressure to the wire. The snowflakes attach to the wire keeping it cool and to the metal shavings. As the CO 2 and metal shavings are released from the wire due to its fast rotation, the snowflakes evaporate leaving only the fine metal shavings as waste. Secondary waste produced is simply the small volume of fine metal shavings removed from the cut surface. Diamond wire sawing using CO 2 cooling has

  6. France, Germany, Greece and the United Kingdom an analysis and comparison of budget deficits and defense spending

    OpenAIRE

    Schoettelndreyer, Friedrich.

    2011-01-01

    Approved for public release; distribution is unlimited. This thesis documents findings on the relationship of government budget deficits and defense spending for France, Germany, Greece, and the United Kingdom in detail and for NATO and OECD country collectives. The thesis topic is relevant, as many European countries are justifying their recent cuts in defense spending with high government budget deficits. The author looked at different data sources and metrics to graphically analyze the ...

  7. Applications of stable isotope analysis to atmospheric trace gas budgets

    Directory of Open Access Journals (Sweden)

    Brenninkmeijer C. A.M.

    2009-02-01

    Full Text Available Stable isotope analysis has become established as a useful method for tracing the budgets of atmospheric trace gases and even atmospheric oxygen. Several new developments are briefly discussed in a systematic way to give a practical guide to the scope of recent work. Emphasis is on applications and not on instrumental developments. Processes and reactions are less considered than applications to resolve trace gas budgets. Several new developments are promising and applications hitherto not considered to be possible may allow new uses.

  8. Study on Roadheader Cutting Load at Different Properties of Coal and Rock

    Directory of Open Access Journals (Sweden)

    Xueyi Li

    2013-01-01

    Full Text Available The mechanism of cutting process of roadheader with cutting head was researched, and the influences of properties of coal and rock on cutting load were deeply analyzed. Aimed at the defects of traditional calculation method of cutting load on fully expressing the complex cutting process of cutting head, the method of finite element simulation was proposed to simulate the dynamic cutting process. Aimed at the characteristics of coal and rock which affect the cutting load, several simulations with different firmness coefficient were taken repeatedly, and the relationship between three-axis force and firmness coefficient was derived. A comparative analysis of cutting pick load between simulation results and theoretical formula was carried out, and a consistency was achieved. Then cutting process with a total cutting head was carried out on this basis. The results show that the simulation analysis not only provides a reliable guarantee for the accurate calculation of the cutting head load and improves the efficiency of the cutting head cutting test but also offers a basis for selection of cutting head with different geological conditions of coal or rock.

  9. A cutting fluid

    Energy Technology Data Exchange (ETDEWEB)

    Kajdas, C.; Dominiak, M.; Kozinski, R.; Misterkiewicz, B.; Polowniak, J.; Szczepaniak, S.

    1982-06-30

    The cutting fluid (SOZh) contains 0.5 to 10 percent vegetable or animal fats, selectively sulfurized in the presence of a catalyst (Kt): 0.1 to 10 percent chlorinated C2O to C3O paraffins, which contain 10 to 50 percent Chlorine in a molecule, and 0.001 to 0.5 percent dialkyldithiocarbamic or alkylen-bis-(dithiocarbamic) acids or their salts or derivatives of the form (R(R')NC(S)SRn'', (CH2)n(NHC(S)S)2R'' or R(R')NC(S)SnC(S)(R)R', where R and R' are alkyl or cycloalkyl of the C1 to C6 fractions, R'' is Hydrogen, a metal, or aliphatic or heterocyclic amine, n = 2 to 6 and 0.001 to 0.3 percent of heterocyclic mercaptanes or disulfides of the cited formula, where A is Nitrogen or Sulfur, and up to 100 percent petroleum oil with a kinematic viscosity of 5 to 50 square millimeters per second at 323K.

  10. Numarc offers several ideas for safe cost-cutting

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Last June, Nuclear Regulatory Commission Chair Ivan Selin gave a speech before the board of directors at the Nuclear Management and Resources Council (Numarc). He allowed as how the agency might have contributed to higher operations and maintenance (O ampersand M) costs at nuclear power plants through regulations that may not significantly enhance plant safety. Selin then asked Numarc to help the NRC identify regs that are both costly and unhelpful. Numarc, the nuclear utilities' technical and regulatory liaison organization, has felt this way about many regs for many years, and was only too happy to oblige. On January 21, Numarc officials appeared before the NRC and said that reforms in eight regulatory areas could be approved immediate by the commissioners

  11. The Gesso Cut for Printmaking

    Science.gov (United States)

    Kelly, Perry; Sarvis, Alva

    1969-01-01

    Directions are given for the preparation, cutting, and printing of a gesso board. A gesso cut is defined as a board coated with gesso into which a design has been impressed. The process is similar to the woodcut, but offers greater textural possibilities. (BF)

  12. Shearer drums - the cutting edge

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, M.; Wright, C.

    2004-09-15

    The paper discusses continuous miner and shearer cutters. It claims cutting drum require the same level of engineering know-how and technical expertise as do the machines driving them, and that the cutting drum, whether on a longwall shearer or continuous miner, comprises, the steel, pedestals, bit holders and the bits.

  13. Water-Cut Sensor System

    KAUST Repository

    Karimi, Muhammad Akram; Shamim, Atif; Arsalan, Muhammad

    2018-01-01

    Provided in some embodiments is a method of manufacturing a pipe conformable water-cut sensors system. Provided in some embodiments is method for manufacturing a water-cut sensor system that includes providing a helical T-resonator, a helical ground

  14. SOME ASPECTS OF STATE BUDGET

    Directory of Open Access Journals (Sweden)

    VEZURE OANA SABINA

    2011-09-01

    Full Text Available In the modern economy, the market, the public purse money materialized in fact all relations that are contained in the sphere of public finances. The state budget is an economic category that is expressed in the form of values, which mobilizes economic relations, is distributed and used the funds of the state. The state budget is a fundamental category of financial sciences. We can address the legal and economic terms. In terms of its legal budget is an act that are set and approved annual revenue and expenditure of the state. Economic activity takes place in each country according to its own mechanism, called the economic mechanism. This is a system of economic management methods for determining management objectives and organizational structures (institutional, superstructure, legal means for driving

  15. Cutting method and device underwater

    International Nuclear Information System (INIS)

    Takano, Genta; Kamei, Hiromasa; Beppu, Seiji

    1998-01-01

    A place of material to be cut is surrounded by an openable/closable box. The material to be cut is cut underwater, and materials generated in this case are removed from the cut portion by a pressurized water jet. The removed materials are sucked and recovered together with water in the box. Among the materials caused by the cutting underwater, solid materials not floating on water are caused to stay in the midway of a sucking and recovering channel. A large sucking force might be required for the entire region of the sucking and recovering channel when sucking and recovering large sized solid materials not floating on water, but even large sized materials can be recovered easily according to the present invention since they are recovered after being sucked and stayed in the midway of the sucking and recovering channel. (N.H.)

  16. Cutting concrete with abrasion jet

    International Nuclear Information System (INIS)

    Yie, G.G.

    1982-01-01

    Fluidyne Corporation has developed a unique process and apparatus that allow selected abrasives to be introduced into high-speed waterjet to produce abrasive-entrained waterjet that has high material-cutting capabilities, which is termed by Fluidyne as the Abrasion Jet. Such Abrasion Jet has demonstrated capability in cutting hard rock and concrete at a modest pressure of less than 1360 bars (20,000 psi) and a power input of less than 45 kW (60 horsepower). Abrasion Jet cutting of concrete is characterized by its high rate of cutting, flexible operation, good cut quality, and relatively low costs. This paper presents a general description of this technology together with discussions of recent test results and how it could be applied to nuclear decontamination and decommissioning work. 8 references

  17. Budget Brief: 2015 Proposed Budget Milwaukee Public Schools

    Science.gov (United States)

    Allen, Vanessa; Chapman, Anne; Henken, Rob

    2014-01-01

    In this report, the authors provide a detailed analysis of the major changes in revenue and expenditures in the Milwaukee Public Schools (MPS) 2015 proposed budget, and the manner in which MPS has responded to recent legislative changes and turbulent workforce challenges. The objective is to provide an independent assessment of the district's…

  18. ANALYSIS OF PARAMETERS AFFECTING THE QUALITY OF A CUTTING MACHINE

    Directory of Open Access Journals (Sweden)

    Iveta Onderová

    2014-02-01

    Full Text Available The quality of cutting machines is affected by several factors that can be directly or indirectly influenced by manufacturers, technicians and users of machine tools. The most critical qualitative evaluation parameters of machine tools include accuracy and stability. Investigations of accuracy and repeatable positioning accuracy were essential for the research presented in this paper. The aim was to develop and experimentally verify the design of a methodology for cutting centers aimed at achieving the desired working precision. Before working on the topic described here, it was necessary to make several scientific analyses, which are summarized in this paper. We can build on the initial working hypothesis that by improving the technological parameters (e.g. by increasing the working speed of the machine, or by improving the precision of the positioning the quality of the cutting machine will also be improved. For the purposes of our study, several investigated parameters were set affecting positioning accuracy, such as rigidity, positioning speed, etc. First, the stiffness of the portal structure of the cutting machine was analyzed. FEM analysis was used to investigate several alternative structures of the cutting machine, and also an innovative solution for beam mounting. The second step was to integrate two types of drives into the design of the cutting machine. The first drive is a classic rack and pinion drive for cutting machines. To increase (improve the working speed of the machine, linear motors were designed as an alternative drive. The portal of the cutting machine was designed for a working speed of 260mmin−1 and acceleration of 25 m. s−2. The third step was based on the results of the analysis. In collaboration with Microstep, an experimental cutting machine in a portal version was produced using linear synchronous motors driving the portal on both sides, and with direct linear metering of its position. In the fourth step, an

  19. Do budget balance rules anchor budget balance expectations? -- Some international evidence

    OpenAIRE

    Rülke, Jan-Christoph; Frenkel, Michael; Lis, Eliza

    2013-01-01

    This is the first study that analyzes whether budget balance expectations are anchored and whether budget balance rules effectively anchor expectations. To this end, we use a unique data set which covers budget balance expectations in 17 countries that implemented a budget balance rules. While our results are mixed concerning the general impact of budget balance rules on anchoring expectations, we do find that specific features of budget balance rules are important to successfully anchor budg...

  20. Feminism, Budgeting and Gender Justice

    Science.gov (United States)

    Misra, S. N.; Ghadai, Sanjaya Kumar

    2017-01-01

    The Fourth Conference on Women at Beijing (1995) underlined the importance of gender mainstreaming; spurring India to provide for separate Gender Budgeting in 2005-06. The Constitution tries to make fine balance between right to equality and positive discrimination for promoting gender justice in India. Yet high levels of Gender Inequality Index…

  1. Kollektiivne vastutus ja gender budgeting

    Index Scriptorium Estoniae

    2005-01-01

    Vestlusringi teemad: riigieelarve koostamisel ei arvestata soolist võrdõiguslikkust; gender budgeting kui üks soolise võrdõiguslikkuse jälgimise viise; vabaabielu võib osutuda naisele palju ebasoodsamaks kui mehele; kogukonna kollektiivne vastutus perevägivalla korral. Vt. samas: Aasta 2004 suurte mõtlejate auhinnad

  2. Constituency Input into Budget Management.

    Science.gov (United States)

    Miller, Norman E.

    1995-01-01

    Presents techniques for ensuring constituency involvement in district- and site-level budget management. Outlines four models for securing constituent input and focuses on strategies to orchestrate the more complex model for staff and community participation. Two figures are included. (LMI)

  3. Monitoring personal budgets and restrictions

    NARCIS (Netherlands)

    Ab van der Torre; Ingrid Ooms; Mirjam de Klerk

    2013-01-01

    The personal budget is a sum of money which recipients can use to arrange and pay for their own care provider. Since its introduction, demand for this provision, which is funded through the Exceptional Medical Expenses Act (AWBZ) has grown rapidly, prompting the Dutch government to take a number

  4. Planning-Programming-Budgeting Systems.

    Science.gov (United States)

    Tudor, Dean

    Planning Programming and Budgeting Systems (PPBS) have been considered as either synonymous with abstract, advanced, mathematical systems analysis or as an advanced accounting and control system. If PPBS is to perform a useful function, both viewpoints must be combined such that a number of standardized procedures and reports are required and…

  5. Technology support for participatory budgeting

    DEFF Research Database (Denmark)

    Rose, Jeremy; Rios, Jesus; Lippa, Barbara

    2010-01-01

    Participatory budgeting is a reasonably well-established governance practice, particularly in South America. It is information and communication rich - making it well suited for modern technology support; in addition, the widespread participation of many citizens is difficult to achieve without...

  6. Zero-Based Budgeting Redux.

    Science.gov (United States)

    Geiger, Philip E.

    1993-01-01

    Zero-based, programmatic budgeting involves four basic steps: (1) define what needs to be done; (2) specify the resources required; (3) determine the assessment procedures and standards to use in evaluating the effectiveness of various programs; and (4) assign dollar figures to this information. (MLF)

  7. Geology on a Sand Budget

    Science.gov (United States)

    Kane, Jacqueline

    2004-01-01

    Earth science teachers know how frustrating it can be to spend hundreds of dollars on three-dimensional (3-D) models of Earth's geologic features, to use the models for only a few class periods. To avoid emptying an already limited science budget, the author states that teachers can use a simple alternative to the expensive 3-D models--sand. She…

  8. Characterization of Flame Cut Heavy Steel: Modeling of Temperature History and Residual Stress Formation

    Science.gov (United States)

    Jokiaho, T.; Laitinen, A.; Santa-aho, S.; Isakov, M.; Peura, P.; Saarinen, T.; Lehtovaara, A.; Vippola, M.

    2017-12-01

    Heavy steel plates are used in demanding applications that require both high strength and hardness. An important step in the production of such components is cutting the plates with a cost-effective thermal cutting method such as flame cutting. Flame cutting is performed with a controlled flame and oxygen jet, which burns the steel and forms a cutting edge. However, the thermal cutting of heavy steel plates causes several problems. A heat-affected zone (HAZ) is generated at the cut edge due to the steep temperature gradient. Consequently, volume changes, hardness variations, and microstructural changes occur in the HAZ. In addition, residual stresses are formed at the cut edge during the process. In the worst case, unsuitable flame cutting practices generate cracks at the cut edge. The flame cutting of thick steel plate was modeled using the commercial finite element software ABAQUS. The results of modeling were verified by X-ray diffraction-based residual stress measurements and microstructural analysis. The model provides several outcomes, such as obtaining more information related to the formation of residual stresses and the temperature history during the flame cutting process. In addition, an extensive series of flame cut samples was designed with the assistance of the model.

  9. Regge cuts in inclusive reactions

    International Nuclear Information System (INIS)

    Paige, F.E.; Trueman, T.L.

    1975-01-01

    The contribution of Regge cuts to single-particle inclusive processes is analyzed using the techniques of Gribov. The dependence of these contributions on the polarization state of the target is emphasized. A general formula is obtained and certain contributions to it are calculated. It is not possible, however, to reduce this to a simple, powerful formula expressing the total cut contribution in terms of other measurable quantities, as can be done for the cut contribution to the total cross section. The reasons for this are discussed in detail. The single-particle intermediate states, analogous to the absorption model for elastic scattering, are explicitly calculated as an illustration

  10. Laser cutting of Kevlar laminates

    Energy Technology Data Exchange (ETDEWEB)

    VanCleave, R.A.

    1977-09-01

    An investigation has been conducted of the use of laser energy for cutting contours, diameters, and holes in flat and shaped Kevlar 49 fiber-reinforced epoxy laminates as an alternate to conventional machining. The investigation has shown that flat laminates 6.35 mm thick may be cut without backup by using a high-powered (1000-watt) continuous wave CO/sub 2/ laser at high feedrates (33.87 mm per second). The cut produced was free of the burrs and delaminations resulting from conventional machining methods without intimate contact backup. In addition, the process cycle time was greatly reduced.

  11. Preferences of cut flowers consumers

    Directory of Open Access Journals (Sweden)

    Sylwia Kierczyńska

    2010-01-01

    Full Text Available The results of interviews suggest that majority of the cut flowers’ consumers has favourite kind of flower, among which most frequently pointed one was the rose. More than half of the interviewed favour the uniform colour of cut flowers and red colour was the most favourite one. The subtle smell of flowers was the most preferable one but the intensive fragrance was favoured for more consumers than odourless flowers. The data from selected florists’ confirm the information from interviews – in spite of the occasion, roses were the most demanded cut flowers.

  12. Cutting mountain hardwood stands

    Science.gov (United States)

    Ralph W. Marquis; Sidney Weitzman; Carl J. Holcomb

    1954-01-01

    On the Fernow Experimental Forest in West Virginia, as on several other experimental forests in the Northeast, studies are being conducted to compare the biologic and economic results of different methods of forest management. The experiments are being carried out on compartments varying in size from 50 t o 150 acres. Such areas are large enough to permit the...

  13. Prototype arc saw design and cutting trials

    International Nuclear Information System (INIS)

    Allison, G.S.

    1980-09-01

    A program was initiated to develop the arc saw as a tool capable of removing the end fittings from spent nuclear fuel bundles. A special arc saw for this purpose was designed, installed at the Pacific Northwest Laboratory and satisfactorily operated to remove end fittings from simulated, nonradioactive fuel bundles. The design of the arc saw included consideration of the cutting environment, power supply size, control equipment, and work piece size. Several simulated fuel bundles were cut to demonstrate that the arc saw met design specifications. Although the arc saw development program was curtailed before significant performance data could be collected, tests indicate that the arc saw is a good means of cropping spent fuel bundles and is well suited to remote operation and maintenance

  14. Riemannian and Lorentzian flow-cut theorems

    Science.gov (United States)

    Headrick, Matthew; Hubeny, Veronika E.

    2018-05-01

    We prove several geometric theorems using tools from the theory of convex optimization. In the Riemannian setting, we prove the max flow-min cut (MFMC) theorem for boundary regions, applied recently to develop a ‘bit-thread’ interpretation of holographic entanglement entropies. We also prove various properties of the max flow and min cut, including respective nesting properties. In the Lorentzian setting, we prove the analogous MFMC theorem, which states that the volume of a maximal slice equals the flux of a minimal flow, where a flow is defined as a divergenceless timelike vector field with norm at least 1. This theorem includes as a special case a continuum version of Dilworth’s theorem from the theory of partially ordered sets. We include a brief review of the necessary tools from the theory of convex optimization, in particular Lagrangian duality and convex relaxation.

  15. Estimation of Forest Fire-fighting Budgets Using Climate Indexes

    NARCIS (Netherlands)

    Xu, Z.; Kooten, van G.C.

    2012-01-01

    Given the complexity and relative short length of current predicting system for fire behavior, it is inappropriate to be referred for planning fire-fighting budgets of BC government due to the severe uncertainty of fire behavior across fire seasons. Therefore, a simple weather derived index for

  16. Budget estimates, fiscal years 1994--1995

    International Nuclear Information System (INIS)

    1993-04-01

    This report contains the fiscal year budget justification to Congress. The budget provides estimates for salaries and expenses and for the Office of the Inspector General for fiscal years 1994 and 1995

  17. Regge cuts: A general approach

    International Nuclear Information System (INIS)

    Weis, J.H.

    1976-01-01

    We discuss an approach to the calculation of Regge-cut contributions to scattering amplitudes which relies only on the general structure of the physical Reggeon couplings. It thus allows a unified treatment of disparate models [such as the Feynman (Mandelstam) graph model and the dual model] and a general derivation of the Abramovskii--Gribov--Kancheli (AGK) rules. The structure of the Reggeon couplings is expressed through integrals over complex helicity. The Regge-cut amplitude can then be obtained, and its s-channel discontinuity, taken; there results a direct derivation of a set of ''cutting rules'' which express the total discontinuity as a sum of terms involving various discontinuities of the Reggeon couplings. The equality of these discontinuities follows directly if the singularities in complex helicity are the usual ones. Thus the AGK rules are seen to be quite model independent. Here we study in detail the simplest example: the Reggeon-particle cut in the four-particle amplitude

  18. Materials selection for cutting tools

    International Nuclear Information System (INIS)

    Burkhis, Adel M.

    2008-01-01

    The selection of proper tool steel for a given application is a difficult task. So; the most important selection factors in choosing cutting tool materials are based on their tool material requirements, cutting tool design and service conditions which is mainly considered as functional requirements. The processability requirements concerns in heat treat ability of the material tool. The classification of these tool materials were discussed with their properties requirement and percent of alloying element which is added to give best properties with a little increase in cost that highly appear in comparison of the selection. The cutting tool materials were evaluated based on two cases; The first was in case of rough surface; the high speed steels is the best material and the other was the ceramic material is the highest performance in cutting of soft or high rate of metal removal. (author)

  19. Laser Cutting Tool Path Optimization

    OpenAIRE

    Dewil, Reginald; Cattrysse, Dirk; Vansteenwegen, Pieter

    2011-01-01

    Given a set of irregular parts nested on a metal sheet, minimize the total non- cutting time for the cutter head, cutting all the required elements and returning to the starting location. The problem is modeled as a generalized traveling sales- person problem with special precedence constraints. An initial feasible solution is generated and improved by local moves embedded in a tabu search framework. The proposed algorithm shows promising results in comparison with a commercial...

  20. Economic technology of laser cutting

    Science.gov (United States)

    Fedin, Alexander V.; Shilov, Igor V.; Vassiliev, Vladimir V.; Malov, Dmitri V.; Peskov, Vladimir N.

    2000-02-01

    The laser cutting of color metals and alloys by a thickness more than 2 mm has significant difficulties due to high reflective ability and large thermal conduction. We made it possible to raise energy efficiency and quality of laser cutting by using a laser processing system (LPS) consisting both of the YAG:Nd laser with passive Q-switching on base of LiF:F2- crystals and the CO2 laser. A distinctive feature of the LPS is that the radiation of different lasers incorporated in a coaxial beam has simultaneously high level of peak power (more than 400 kW in a TEM00 mode) and significant level of average power (up to 800 W in a TEM01 mode of the CO2 laser). The application of combined radiation for cutting of an aluminum alloy of D16 type made it possible to decrease the cutting energy threshold in 1.7 times, to increase depth of treatment from 2 up to 4 mm, and velocity from 0.015 up to 0.7 m/min, and also to eliminate application of absorptive coatings. At cutting of steels the velocity of treatment was doubled, and also an oxygen flow was eliminated from the technological process and replaced by the air. The obtained raise of energy efficiency and quality of cutting is explained by an essential size reducing of a formed penetration channel and by the shifting of a thermal cutting mode from melting to evaporation. The evaluation of interaction efficiency of a combined radiation was produced on the basis of non-stationary thermal-hydrodynamic model of a heating source moving as in the cutting direction, and also into the depth of material.

  1. Fiscal Year 2010 Budget Request. Summary Justification

    Science.gov (United States)

    2009-05-01

    SERVICES AND DEFENSE AGENCIES INTRODUCTION Services and Defense Agencies HIGHLIGHTS Overview The FY 2010 budget request organizes, trains...DoD FY 2010 Budget Request Summary Justification SPECIAL TOPICS INTRODUCTION Special Topics HIGHLIGHTS Overview The FY 2010 budget... MANGEMENT 2-48 DoD FY 2010 Budget Request Summary Justification SPECIAL TOPICS FINANCIAL MANGEMENT 2-49 While DoD has made progress in

  2. Budget estimates fiscal year 1995: Volume 10

    International Nuclear Information System (INIS)

    1994-02-01

    This report contains the Nuclear Regulatory Commission (NRC) fiscal year budget justification to Congress. The budget provides estimates for salaries and expenses and for the Office of the Inspector General for fiscal year 1995. The NRC 1995 budget request is $546,497,000. This is an increase of $11,497,000 above the proposed level for FY 1994. The NRC FY 1995 budget request is 3,218 FTEs. This is a decrease of 75 FTEs below the 1994 proposed level

  3. Budget estimates fiscal year 1995: Volume 10

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    This report contains the Nuclear Regulatory Commission (NRC) fiscal year budget justification to Congress. The budget provides estimates for salaries and expenses and for the Office of the Inspector General for fiscal year 1995. The NRC 1995 budget request is $546,497,000. This is an increase of $11,497,000 above the proposed level for FY 1994. The NRC FY 1995 budget request is 3,218 FTEs. This is a decrease of 75 FTEs below the 1994 proposed level.

  4. [Cuts, austerity and health. SESPAS report 2014].

    Science.gov (United States)

    Segura Benedicto, Andreu

    2014-06-01

    Since 2009, the economic recession has led to cuts in spending on social welfare policy and in health care. The most important risks to health depend on negative changes in social determinants. Notable among these determinants are unemployment and the large proportion of people at risk of poverty, which affects 30% of children younger than 14 years. Social inequalities have increased significantly, much more than health inequalities, probably because the value of retirement pensions has been maintained until now. Most of the population is fairly satisfied with the public health system, although it is under considerable pressure. Mortality statistics have not been affected so far, but there has been an increase in mood disorders and mental health problems. Health services utilization has decreased and the number of publicly prescribed drugs has fallen dramatically. This restriction accounts for much of the decrease in public spending on health, since the hospital care budget has not decreased, despite the fall in primary care and public health spending. The crisis could encourage community health and the inclusion of health in all policies. It is the responsibility of professionals and public health institutions monitoring the trend in health problems and their determinants to avoid irreversible situations as far as possible. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

  5. Climate Change in the US Government Budget. Funding for Technology and Other Programmes, and Implications for EU-US Relations

    International Nuclear Information System (INIS)

    Brewer, T.L.

    2005-01-01

    With increasing Congressional support for funding climate change technology programmes, as reflected in passage of the Hagel/Pryor amendment to the energy policy bill in June 2005, issues about the climate change budget are becoming more salient. In this Policy Brief, Congressional and Presidential actions on several recent budgets are examined for the four principal areas of the climate change budget: technology, science, international and tax credits. The emphasis is on energy technology in particular, because of its salience in current policy discussions and its relative size in financial terms. Highlights of the findings include the following: Congress imposed substantial (63.3%) increases over the administration's climate change technology proposals for 2004 and then small increases for FY2005. For 2006, the administration has proposed reductions compared with the Congressionally-enacted levels in the technology component - reductions in both nominal and inflation-adjusted terms (-4.1% and -5.6%, respectively). The administration has also proposed cuts for fiscal 2006 in the science and international programmes (-2.9 and -19.0% in real terms). These and other differences in Presidential and Congressional approaches to funding climate change programs provide further evidence that the Presidential- Congressional divide on climate policy is continuing to widen. There is an emerging bi-partisan Congressional coalition in favour of increased spending on a wide range of climate change programmes. This shift will affect EU-US relations on climate change issues for the remainder of the current administration until 2008, and beyond as well

  6. Small forest cuttings mapped with Landsat digital data

    Science.gov (United States)

    Bryant, E.; Dodge, A. G.; Eger, M. J. E.

    1979-01-01

    The Cooperative Landsat Applications Research Group used computer classification of Landsat digital data to map forest cuttings (clearcuts) in northern New Hampshire. Cuttings as small as 3 hectares were identified. Several ages or conditions of clearcuts could be distinguished. Progress in two methods of duplicating classification categories from one Landsat pass to another are discussed. One method was used in making maps of areas in 1973, 1975, and 1978.

  7. Should Corrupt Countries receive Budget Support?

    OpenAIRE

    Kolstad, Ivar

    2005-01-01

    Corruption makes budget support ineffective, and sometimes counter-productive. Budget support is particularly unsuitable in partner countries where political corruption is rampant. As donors increase budget support, it is a paradox that corruption is not more of an issue in evaluations and public financial management assessment methods.

  8. Strategic plan creates a blueprint for budgeting.

    Science.gov (United States)

    Cook, D

    1990-05-01

    Effective healthcare organizations develop budgets that reflect and support a strategic plan. Senior managers set a framework that expresses the hospital's future strategic objectives. The budget enables executives to determine which specific service lines are profitable or unprofitable. Administrators and clinicians at all levels are involved in the budgeting process.

  9. The carbon budget of the North Sea

    NARCIS (Netherlands)

    Thomas, H.; Bozec, Y.; Baar, H.J.W. de; Elkalay, K.; Frankignoulle, M.; Schiettecatte, L.-S.; Kattner, G.; Borges, A.V.; Gattuso, J.-P.

    2005-01-01

    A carbon budget has been established for the North Sea, a shelf sea on the NW European continental shelf. The carbon exchange fluxes with the North Atlantic Ocean dominate the gross carbon budget. The net carbon budget – more relevant to the issue of the contribution of the coastal ocean to the

  10. 7 CFR 956.41 - Budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Budget. 956.41 Section 956.41 Agriculture Regulations... OF SOUTHEAST WASHINGTON AND NORTHEAST OREGON Expenses and Assessments § 956.41 Budget. Prior to each fiscal period and as may be necessary thereafter, the committee shall prepare an estimated budget of...

  11. 7 CFR 945.41 - Budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Budget. 945.41 Section 945.41 Agriculture Regulations... COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Budget, Expenses and Assessments § 945.41 Budget. At the beginning of each fiscal period, and as may be necessary thereafter, the...

  12. 25 CFR 41.12 - Annual budget.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Annual budget. 41.12 Section 41.12 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.12 Annual budget. Appropriations... identified in the Bureau of Indian Affairs Budget Justification. Funds appropriated for grants under this...

  13. 7 CFR 958.41 - Budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Budget. 958.41 Section 958.41 Agriculture Regulations... Budget. Prior to each fiscal period, and as may be necessary thereafter the committee shall prepare a budget of estimated income and expenditures necessary for the administration of this part. The committee...

  14. 7 CFR 966.41 - Budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Budget. 966.41 Section 966.41 Agriculture Regulations... Handling Expenses and Assessments § 966.41 Budget. At the beginning of each fiscal period and as may be necessary thereafter, the committee shall prepare an estimated budget of income and expenditures necessary...

  15. 7 CFR 948.76 - Budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Budget. 948.76 Section 948.76 Agriculture Regulations... Regulating Handling Expenses and Assessments § 948.76 Budget. As soon as practicable after the beginning of... budget of income and expenditures necessary for its administration of this part. Each area committee may...

  16. Pure Nash Equilibria in Restricted Budget Games

    NARCIS (Netherlands)

    Drees, Maximilian Werner; Feldotto, Matthias; Riechers, Sören; Skopalik, Alexander

    2017-01-01

    In budget games, players compete over resources with finite budgets. For every resource, a player has a specific demand and as a strategy, he chooses a subset of resources. If the total demand on a resource does not exceed its budget, the utility of each player who chose that resource equals his

  17. 25 CFR 122.7 - Budget.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Budget. 122.7 Section 122.7 Indians BUREAU OF INDIAN... § 122.7 Budget. (a) By August 1 of each year, the Osage Tribal Education Committee will submit a proposed budget to the Assistant Secretary or to his/her designated representative for formal approval...

  18. 7 CFR 955.41 - Budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Budget. 955.41 Section 955.41 Agriculture Regulations... Assessments § 955.41 Budget. At least 60 days prior to each fiscal period, or such other date as may be... budget of income and expenditures necessary for the administration of this part. The committee may...

  19. 40 CFR 35.9035 - Budget period.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Budget period. 35.9035 Section 35.9035... ASSISTANCE Financial Assistance for the National Estuary Program § 35.9035 Budget period. An applicant may choose its budget period in consultation with and subject to the approval of the Regional Administrator. ...

  20. 7 CFR 906.33 - Budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Budget. 906.33 Section 906.33 Agriculture Regulations... GRANDE VALLEY IN TEXAS Order Regulating Handling Expenses and Assessments § 906.33 Budget. At the... budget of income and expenditures necessary for the administration of this part. The committee shall...

  1. Defense.gov Special Report: Fiscal Budget

    Science.gov (United States)

    Department of Defense Submit Search 2012 Fiscal Budget Published Feb. 15, 2011 Top Stories Commanders Cite Department is losing billions of dollars by Congress' failure to pass the department's fiscal 2011 budget . Gates told a Senate committee. Story Gates, Mullen Take Budget to Senate WASHINGTON, Feb. 17, 2011 - The

  2. 7 CFR 959.41 - Budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Budget. 959.41 Section 959.41 Agriculture Regulations... Handling Expenses and Assessments § 959.41 Budget. As soon as practicable after the beginning of each fiscal period and as may be necessary thereafter, the committee shall prepare an estimated budget of...

  3. Program Budgeting for a Graduate School Library.

    Science.gov (United States)

    Westerman, Mel

    Program budgeting, a method founded in the systems approach, allows control, management, and planning in the library system, and avoids the more comprehensive analysis required by zero-based budgeting. By evaluation of the impacts of the work accomplished by the library staff, the budgeted amounts can be justified or adjusted in subsequent years.…

  4. FINANCIAL WORKBOOK Quick Reference -Budget Preparation 1 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Alexandra Eustache

    FINANCIAL WORKBOOK. Quick Reference -Budget Preparation. 6. Enter detailed budget notes for each line item. Use the “add new row “ button if more rows are needed. (Refer to page 7 on user guider for more information on budget notes). 7. On the “indirect cost” sheet, enter a fixed percentage or amount(s) a. For fixed ...

  5. 7 CFR 3015.115 - Budget revisions.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Budget revisions. 3015.115 Section 3015.115..., DEPARTMENT OF AGRICULTURE UNIFORM FEDERAL ASSISTANCE REGULATIONS Programmatic Changes and Budget Revisions § 3015.115 Budget revisions. (a) Nonconstruction projects. (1) Except as provided in paragraph (a)(2) of...

  6. 42 CFR 441.472 - Budget methodology.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Budget methodology. 441.472 Section 441.472 Public... Self-Directed Personal Assistance Services Program § 441.472 Budget methodology. (a) The State shall set forth a budget methodology that ensures service authorization resides with the State and meets the...

  7. 12 CFR 917.8 - Budget preparation.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Budget preparation. 917.8 Section 917.8 Banks... POWERS AND RESPONSIBILITIES OF BANK BOARDS OF DIRECTORS AND SENIOR MANAGEMENT § 917.8 Budget preparation. (a) Adoption of budgets. Each Bank's board of directors shall be responsible for the adoption of an...

  8. The Economic and Budget Outlook: An Update

    National Research Council Canada - National Science Library

    1999-01-01

    .... It satisfies the requirement of section 202(e) of the Congressional Budget Act of 1974 for CBO to submit periodic reports to the Committees on the Budget with respect to fiscal policy and to provide five-year baseline projections of the federal budget...

  9. Twice cutting method reduces tibial cutting error in unicompartmental knee arthroplasty.

    Science.gov (United States)

    Inui, Hiroshi; Taketomi, Shuji; Yamagami, Ryota; Sanada, Takaki; Tanaka, Sakae

    2016-01-01

    Bone cutting error can be one of the causes of malalignment in unicompartmental knee arthroplasty (UKA). The amount of cutting error in total knee arthroplasty has been reported. However, none have investigated cutting error in UKA. The purpose of this study was to reveal the amount of cutting error in UKA when open cutting guide was used and clarify whether cutting the tibia horizontally twice using the same cutting guide reduced the cutting errors in UKA. We measured the alignment of the tibial cutting guides, the first-cut cutting surfaces and the second cut cutting surfaces using the navigation system in 50 UKAs. Cutting error was defined as the angular difference between the cutting guide and cutting surface. The mean absolute first-cut cutting error was 1.9° (1.1° varus) in the coronal plane and 1.1° (0.6° anterior slope) in the sagittal plane, whereas the mean absolute second-cut cutting error was 1.1° (0.6° varus) in the coronal plane and 1.1° (0.4° anterior slope) in the sagittal plane. Cutting the tibia horizontally twice reduced the cutting errors in the coronal plane significantly (Pcutting the tibia horizontally twice using the same cutting guide reduced cutting error in the coronal plane. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Public Budgeting: The Compromises Among the Sound Budgeting Principles in Contingency Funding

    Science.gov (United States)

    2017-06-01

    funding for major aircraft using supplemental appropriations in place of incremental funding as intended for normal budgeting practices. This was a prime... incrementally funded on an annual basis. This change in budgeting practices lacked predictability because it allowed last-minute budget requests with low...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release. Distribution is unlimited. PUBLIC BUDGETING

  11. Teaching the Federal Budget, National Debt, and Budget Deficit: Findings from High School Teachers

    Science.gov (United States)

    Marri, Anand R.; Ahn, Meesuk; Crocco, Margaret Smith; Grolnick, Maureen; Gaudelli, William; Walker, Erica N.

    2011-01-01

    The issues surrounding the federal budget, national debt, and budget deficit are complex, but not beyond the reach of young students. This study finds scant treatment of the federal budget, national debt, and budget deficit in high schools today. It is hardly surprising that high school teachers spend so little time discussing these topics in…

  12. Is Zero-Based Budgeting Different from Planning--Programming--Budgeting Systems?

    Science.gov (United States)

    Hentschke, Guilbert C.

    1977-01-01

    Successful adoption of zero-base budgeting (ZBB) will be greater than that of planning-programming-budgeting-systems (PPBS) because perceived problems inherent in PPBS are largely missing in ZBB; ZBB appears to fit current school district budgeting behavior; and ZBB seems to improve communication about the need for budget reform. (Author/IRT)

  13. Capital budgeting practices in Spain

    Directory of Open Access Journals (Sweden)

    Pablo de Andrés

    2015-01-01

    Full Text Available This paper seeks to shed further light on the capital budgeting techniques used by Spanish companies. Our paper posits that the gap between theory and practice might be related to the nature of sources of value and to the efficiency of mechanisms aligning managerial and shareholder incentives, rather than to resource restrictions or model misinterpretation. We analyze data from a survey conducted in 2011, the final sample comprising 140 non-financial Spanish firms. Our findings show a behaviour pattern similar to that reported in prior research for firms in other countries. Particularly noteworthy is that payback appears to be the most widely used tool, while real options are used relatively little. Our results confirm that size and industry are related to the frequency of use of certain capital budgeting techniques. Further, we find that the relevance of growth opportunities and flexibility is an important factor explaining the use of real options.

  14. Legislative Bargaining and Incremental Budgeting

    OpenAIRE

    Dhammika Dharmapala

    2002-01-01

    The notion of 'incrementalism', formulated by Aaron Wildavsky in the 1960's, has been extremely influential in the public budgeting literature. In essence, it entails the claim that legislators engaged in budgetary policymaking accept past allocations, and decide only on the allocation of increments to revenue. Wildavsky explained incrementalism with reference to the cognitive limitations of lawmakers and their desire to reduce conflict. This paper uses a legislative bargaining framework to u...

  15. Soft Budgets And Highway Franchising

    OpenAIRE

    Eduardo Engel; Ronald Fischer; Alexander Galetovic

    2004-01-01

    Latin American governments progressively substituted build–operate–and–transfer (BOT) contracts for government–provided highways during the nineties. Because under BOT a private franchise holder finances and operates the road in exchange for tolls, it is often claimed that BOT represents a privatization of highways. We argue that, as currently applied, the BOT model is an imperfect and incomplete privatization, because the franchise holders’ budget constraint has been soft, with losses being ...

  16. Analyzing the effect of tool edge radius on cutting temperature in micro-milling process

    Science.gov (United States)

    Liang, Y. C.; Yang, K.; Zheng, K. N.; Bai, Q. S.; Chen, W. Q.; Sun, G. Y.

    2010-10-01

    Cutting heat is one of the important physical subjects in the cutting process. Cutting heat together with cutting temperature produced by the cutting process will directly have effects on the tool wear and the life as well as on the workpiece processing precision and surface quality. The feature size of the workpiece is usually several microns. Thus, the tiny changes of cutting temperature will affect the workpiece on the surface quality and accuracy. Therefore, cutting heat and temperature generated in micro-milling will have significantly different effect than the one in the traditional tools cutting. In this paper, a two-dimensional coupled thermal-mechanical finite element model is adopted to determine thermal fields and cutting temperature during the Micro-milling process, by using software Deform-2D. The effect of tool edge radius on effective stress, effective strain, velocity field and cutting temperature distribution in micro-milling of aluminum alloy Al2024-T6 were investigated and analyzed. Also, the transient cutting temperature distribution was simulated dynamically. The simulation results show that the cutting temperature in Micro-milling is lower than those occurring in conventional milling processes due to the small loads and low cutting velocity. With increase of tool edge radius, the maximum temperature region gradually occurs on the contact region between finished surfaced and flank face of micro-cutter, instead of the rake face or the corner of micro-cutter. And this phenomenon shows an obvious size effect.

  17. Capital Construction Fund Program :: Office of Management and Budget

    Science.gov (United States)

    Leaders Budget Policy Work for NOAA Fisheries Contact Us Programs Sustainable Fisheries Protected Regional Fishery Management Councils Congress Activities Budget Testimony Educators and Students Education Budget Home Appeals Division Budget FOIA Financial Services Saltonstall-Kennedy Grant Program Fisheries

  18. Funding freeze leaves high-energy physics facing cuts

    CERN Multimedia

    Brumfiel, G

    2002-01-01

    The DOE Office of Science will receive no increase to its budget in 2003. As a result, several research programmes will be curtailed. Extra resources needed to upgrade the Tevatron will come at the cost of closing the AGS in New York (1/2 page).

  19. Zero-base budgeting and the library.

    Science.gov (United States)

    Sargent, C W

    1978-01-01

    This paper describes the application of zero-base budgeting to libraries and the procedures involved in setting up this type of budget. It describes the "decision packages" necessary when this systmem is employed, as well as how to rank the packages and the problems which are related to the process. Zero-base budgeting involves the entire staff of a library, and the incentive engendered makes for a better and more realistic budget. The paper concludes with the problems which one might encounter in zero-base budgeting and the major benefits of the system. PMID:626795

  20. Polity age and political budget cycles

    DEFF Research Database (Denmark)

    Aaskoven, Lasse

    2018-01-01

    Incumbent incentive for competence-signaling and lack of voter information are generally thought to be factors that increase the prevalence of political budget cycles. These mechanisms should be more prevalent in new political units. Since the creation of new political units is rarely exogenous......-experimental to study whether political budget cycles are larger in new political units. Contrary to theoretical predictions, political budget cycles seem to be of a smaller scale in the new municipalities, but only regarding budget cycles in budgetary overruns. The findings are of wider interest for discussions about...... the mechanisms behind context-conditional political budget cycles....

  1. Reviews on laser cutting technology for industrial applications

    Science.gov (United States)

    Muangpool, T.; Pullteap, S.

    2018-03-01

    In this paper, an overview of the laser technology applied for the industrial has been reviewed. In general, this technology was used in several engineering applications such as industrial, medical, science, research sectors, etc. Focusing on the laser technology in the industrial section, it was, normally, employed for many purposes i.e. target marking, welding, drilling, and also cutting. Consequently, the laser cutting technology was, however, divided into three classifications YAG, CO2, and fiber laser, respectively. Each laser types have different advantages and disadvantages depending on the material type. The advantages by using laser cutting compared with the general cutting machines were exploited in terms of narrow kerf, high cutting speed, low heat-affected zone (HAZ), improve efficiency of the cutting process, high accuracy, etc. However, the main objectives from the technology used were increasing of the products and also decreasing the production cost. In the opposite way, some disadvantages of the technology were summarized by complexity to operate, high maintenance cost, and also high power consumption. In Thailand industry, there were many factories used this technology as a cutting process. Unfortunately, only few researches were published. It might explains that this technology were difficulty to develop, high investment, and also easy to import from aboard. For becoming to the Thailand 4.0 community, the Thailand industry might awareness to reduce the importing machine and boosting some policies to create novel innovative / know-how from the own country.

  2. Innovative Concepts of Budgeting in the Enterprises

    Directory of Open Access Journals (Sweden)

    Adam Bąk

    2009-03-01

    Full Text Available The article presents the current concepts of budgeting with the special focus on innovative budgets. It includes the evolution of the budgeting concept starting from the traditional one which was applied in the second half of the 20th Century and assumed the budget as the main tool for the achievement of company’s goals. The next presented method is Better Budgeting. It arouse at the nineties as the resposne for the critics of the traditional method which was accused for the fixed assumptions which were no longer matching with the fast changing competitive environment. This method assumed the high level of budget preparation as he opposite to the detailed level as well as shorter planning period. The Beyond Budgeting was the most radical method and eliminated budget as the tool supporting the management; the concept has been used from the nineties until today, by more than seventy multinational companies from beyond budgeting round table. However, Beyond Budgeting was also criticised for not being applied in the industrial sector and too theoretical approach. Therefore, Ronald Gleicha from European Business School, established a working group, which icludes the scientists and managers, in order to create by mid of 2009, the new and opitimal method, which is called Modern Budgeting.

  3. The Structure and Presentation of Provincial Budgets

    Directory of Open Access Journals (Sweden)

    Bev Dahlby

    2015-05-01

    often too slow to be effective during a recession. It is a particularly so in Alberta, where unemployment rates are low and skilled labour is already at a shortage. And the idea that it is somehow fair to saddle future generations with paying for infrastructure they did not vote to build is problematic and permits current generations the ability to be more reckless than they might otherwise. But more to the point, most of the benefits of infrastructure is enjoyed by the generations who are living when it is built; less than 20 per cent of its utility accrues to unborn generations. Furthermore, the tax-smoothing argument implies that taxes should be increased (or other current spending cut to finance an infrastructure program so that the present value of fiscal surpluses cover the debt incurred in financing construction — the key to satisfying the condition of debt solvency. Some infrastructure does “pay for itself” — when user fees or tolls are applied — and in those cases debt financing can be justified. But this almost never happens. Despite claims to the contrary, the cost of a school or a hospital can never be recouped in the higher productivity and wealth it might bring to the jurisdiction, since income taxes (particularly in Alberta are so low. Therefore, when a province announces that it plans to build things, it should also indicate how it will raise the necessary funding to pay for it, rather than borrowing. This is not a message that provincial politicians will want to hear; indeed, their entire budgeting model — based on accrual accounting and capital budgeting — is predicated on the assumption that infrastructure is an asset rather than an expense, despite the fact that maintenance costs make every infrastructure project an ongoing obligation. This model — in part the result of balanced-budget rules — is the primary reason why the public finds provincial budgets to be notoriously incomprehensible. The self-imposed balanced-budget rules

  4. Soft Budget Constraints in Public Hospitals.

    Science.gov (United States)

    Wright, Donald J

    2016-05-01

    A soft budget constraint arises when a government is unable to commit to not 'bailout' a public hospital if the public hospital exhausts its budget before the end of the budget period. It is shown that if the political costs of a 'bailout' are relatively small, then the public hospital exhausts the welfare-maximising budget before the end of the budget period and a 'bailout' occurs. In anticipation, the government offers a budget to the public hospital that may be greater than or less than the welfare-maximising budget. In either case, the public hospital treats 'too many' elective patients before the 'bailout' and 'too few' after. The introduction of a private hospital reduces the size of any 'bailout' and increases welfare. Copyright © 2015 John Wiley & Sons, Ltd.

  5. Rooting Platanus (Platanus acerifolia (Aiton Willd. cuttings in Marechal Cândido Rondon - PR, Brazil: Influence of lesions at cutting bases and depth of planting

    Directory of Open Access Journals (Sweden)

    Danimar Dalla Rosa

    2018-01-01

    Full Text Available Platanus, an arboreal and deciduous plant, is widely adapted and can be used for several purposes. Despite producing viable seeds, production of platanus seedlings usually occurs through vegetative propagation; cuttings are the best and most efficient source for obtaining seedlings. Although cuttings offer a practical and easy method to obtain seedlings in different vegetable species, they are influenced by several factors, both external and internal. The present study aimed to analyze the behavior of plantain cuttings planted in sand subjected to damage or no damage at the cuttings base, and planted at depths of 20 and 40 cm. Experiment was carried out at the experimental station of horticulture and protected cultivation of UNIOESTE-Brazil, in a randomized 2×2 factorial design, which comprises both, planted at 20 cm and 40 cm depths, with 5 replicates and 5 cuttings per replicate. After 170 days of incubation, injured and non- injured cuttings, were evaluated for rooting percentage and cuttings sprouted, length of roots and medium length of stems, stem diameter, number of leaves per stem, and dry mass of roots and shoots. No significant differences were observed in cutting injury. All variables analyzed presented higher values when cuttings were planted at 20 cm depth. Results indicate that planting of platanus cuttings at 20 cm depth leads to better rooting rates and vegetative development.

  6. Usability Evaluation of www.budget.com

    DEFF Research Database (Denmark)

    Bruun, Anders; Jensen, Janne Jul; Skov, Mikael B.

    This report presents the results of a usability evaluation of the budget.com website. The evaluation was carried out by a team of 4 HCI experts, and it involved 10 potential users. The evaluation is based on measurement of (1) task completion time, (2) task completion, (3) user satisfaction and (4......) perceived workload. We have also analyzed the user interaction with the website for (5) usability problems. Through the evaluation, we have found the following weaknesses of the website:   Reservation takes considerably more time than promised. The website indicates that a reservation can be made in 60...... is not useful for specific purposes. The user satisfaction is generally low. Except one high and two low scores, the user satisfaction was in the middle range. There are too many severe usability problems. The evaluation identified a considerable number of usability problems. 5 of them were critical which means...

  7. Equilibrium Analysis in Cake Cutting

    DEFF Research Database (Denmark)

    Branzei, Simina; Miltersen, Peter Bro

    2013-01-01

    Cake cutting is a fundamental model in fair division; it represents the problem of fairly allocating a heterogeneous divisible good among agents with different preferences. The central criteria of fairness are proportionality and envy-freeness, and many of the existing protocols are designed...... to guarantee proportional or envy-free allocations, when the participating agents follow the protocol. However, typically, all agents following the protocol is not guaranteed to result in a Nash equilibrium. In this paper, we initiate the study of equilibria of classical cake cutting protocols. We consider one...... of the simplest and most elegant continuous algorithms -- the Dubins-Spanier procedure, which guarantees a proportional allocation of the cake -- and study its equilibria when the agents use simple threshold strategies. We show that given a cake cutting instance with strictly positive value density functions...

  8. Laser cutting of laminated sheet material: a modeling exercise

    Science.gov (United States)

    de Graaf, Roelof F.; Meijer, Johan

    1997-08-01

    Laser cutting has been investigated for a number of aluminum-synthetic laminates, newly developed materials for the aeronautic and automotive industry. The materials consist of alternating aluminum and synthetic layers. It is shown that these materials can be cut at rates comparable to those of homogeneous aluminum alloys. The cuts show little dross attachment. Also some damage on the synthetic layers has to be accepted. These results initiated a modeling exercise, which resulted in a numerical simulation code. The applied cutting model is based on describing the material in several horizontal layers, each with its own specific thermophysical and optical properties. The separate layers are coupled by known mass, energy and force balanced equations.

  9. The cutting of cocaine and heroin: A critical review.

    Science.gov (United States)

    Broséus, Julian; Gentile, Natacha; Esseiva, Pierre

    2016-05-01

    The illicit drug cutting represents a complex problem that requires the sharing of knowledge from addiction studies, toxicology, criminology and criminalistics. Therefore, cutting is not well known by the forensic community. Thus, this review aims at deciphering the different aspects of cutting, by gathering information mainly from criminology and criminalistics. It tackles essentially specificities of cocaine and heroin cutting. The article presents the detected cutting agents (adulterants and diluents), their evolution in time and space and the analytical methodology implemented by forensic laboratories. Furthermore, it discusses when, in the history of the illicit drug, cutting may take place. Moreover, researches studying how much cutting occurs in the country of destination are analysed. Lastly, the reasons for cutting are addressed. According to the literature, adulterants are added during production of the illicit drug or at a relatively high level of its distribution chain (e.g. before the product arrives in the country of destination or just after its importation in the latter). Their addition seems hardly justified by the only desire to increase profits or to harm consumers' health. Instead, adulteration would be performed to enhance or to mimic the illicit drug effects or to facilitate administration of the drug. Nowadays, caffeine, diltiazem, hydroxyzine, levamisole, lidocaïne and phenacetin are frequently detected in cocaine specimens, while paracetamol and caffeine are almost exclusively identified in heroin specimens. This may reveal differences in the respective structures of production and/or distribution of cocaine and heroin. As the relevant information about cutting is spread across different scientific fields, a close collaboration should be set up to collect essential and unified data to improve knowledge and provide information for monitoring, control and harm reduction purposes. More research, on several areas of investigation, should be

  10. Document segmentation via oblique cuts

    Science.gov (United States)

    Svendsen, Jeremy; Branzan-Albu, Alexandra

    2013-01-01

    This paper presents a novel solution for the layout segmentation of graphical elements in Business Intelligence documents. We propose a generalization of the recursive X-Y cut algorithm, which allows for cutting along arbitrary oblique directions. An intermediate processing step consisting of line and solid region removal is also necessary due to presence of decorative elements. The output of the proposed segmentation is a hierarchical structure which allows for the identification of primitives in pie and bar charts. The algorithm was tested on a database composed of charts from business documents. Results are very promising.

  11. Correlation methods in cutting arcs

    Energy Technology Data Exchange (ETDEWEB)

    Prevosto, L; Kelly, H, E-mail: prevosto@waycom.com.ar [Grupo de Descargas Electricas, Departamento Ing. Electromecanica, Universidad Tecnologica Nacional, Regional Venado Tuerto, Laprida 651, Venado Tuerto (2600), Santa Fe (Argentina)

    2011-05-01

    The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical parameters of such torches. It has been found that the enthalpy number significantly influence the temperature of the electric arc. The obtained correlation shows an average deviation of 3% from the temperature data points. Such correlation can be used, for instance, to predict changes in the peak value of the arc temperature at the nozzle exit of a geometrically similar cutting torch due to changes in its operation parameters.

  12. Correlation methods in cutting arcs

    International Nuclear Information System (INIS)

    Prevosto, L; Kelly, H

    2011-01-01

    The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical parameters of such torches. It has been found that the enthalpy number significantly influence the temperature of the electric arc. The obtained correlation shows an average deviation of 3% from the temperature data points. Such correlation can be used, for instance, to predict changes in the peak value of the arc temperature at the nozzle exit of a geometrically similar cutting torch due to changes in its operation parameters.

  13. Cutting temperature measurement and material machinability

    Directory of Open Access Journals (Sweden)

    Nedić Bogdan P.

    2014-01-01

    Full Text Available Cutting temperature is very important parameter of cutting process. Around 90% of heat generated during cutting process is then away by sawdust, and the rest is transferred to the tool and workpiece. In this research cutting temperature was measured with artificial thermocouples and question of investigation of metal machinability from aspect of cutting temperature was analyzed. For investigation of material machinability during turning artificial thermocouple was placed just below the cutting top of insert, and for drilling thermocouples were placed through screw holes on the face surface. In this way was obtained simple, reliable, economic and accurate method for investigation of cutting machinability.

  14. Stresses in ultrasonically assisted bone cutting

    International Nuclear Information System (INIS)

    Alam, K; Mitrofanov, A V; Silberschmidt, V V; Baeker, M

    2009-01-01

    Bone cutting is a frequently used procedure in the orthopaedic surgery. Modern cutting techniques, such as ultrasonic assisted drilling, enable surgeons to perform precision operations in facial and spinal surgeries. Advanced understanding of the mechanics of bone cutting assisted by ultrasonic vibration is required to minimise bone fractures and to optimise the technique performance. The paper presents results of finite element simulations on ultrasonic and conventional bone cutting analysing the effects of ultrasonic vibration on cutting forces and stress distribution. The developed model is used to study the effects of cutting and vibration parameters (e.g. amplitude and frequency) on the stress distributions in the cutting region.

  15. Cutting system for burnable poison rod

    International Nuclear Information System (INIS)

    Shiina, Atsushi; Toyama, Norihide; Koshino, Yasuo; Fujii, Toshio

    1989-01-01

    Burnable poison rods attached to spent fuels are contained in a containing box and transported to a receiving pool. The burnable poison rod-containing box is provisionally situated by the operation to a handling device to a provisional setting rack in a cutting pool and attached to a cutting guide of a cutting device upon cutting. The burnable poison rod is cut only in a cutting pool water and tritium generated upon cutting is dissolved into the cutting pool water. Diffusion of tritium is thus restricted. Further, the cutting pool is isolated by a partition device from the receiving pool during cutting of the burnable poison rod. Accordingly, water in which tritium is dissolved is inhibited from moving to the receiving pool and prevail of tritium contamination can be avoided. (T.M.)

  16. Healthcare payments under the budget deal: mostly good news for physicians

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2018-02-01

    Full Text Available No abstract available. Article truncated after 150 words. In the early morning hours last Friday (2/9/18 Congress passed and President Trump signed a massive budget agreement (1. The spending package will cost about $320 billion over 10 years, according to the Congressional Budget Office. Payments for healthcare substantially increase under the deal. Most praised the agreement. "Congress made the right choice this morning for patients and communities by voting to halt damaging cuts to hospitals that care for low-income working families and others who face financial challenges," said Dr. Bruce Siegel, CEO of America's Essential Hospitals, which represents the nation's safety-net facilities. Marc Goldwein of the Center for a Responsible Federal Budget called the healthcare provisions the one "beacon of light" in what otherwise is an exorbitantly costly budget bill. Goldwein praised its mix of structural reforms with "reasonable policy” and liked that the bill pays for the increased healthcare spending. The bill extends Medicare physician fee cuts ….

  17. Budget estimates. Fiscal year 1998

    International Nuclear Information System (INIS)

    1997-02-01

    The U.S. Congress has determined that the safe use of nuclear materials for peaceful purposes is a legitimate and important national goal. It has entrusted the Nuclear Regulatory Commission (NRC) with the primary Federal responsibility for achieving that goal. The NRC's mission, therefore, is to regulate the Nation's civilian use of byproduct, source, and special nuclear materials to ensure adequate protection of public health and safety, to promote the common defense and security, and to protect the environment. The NRC's FY 1998 budget requests new budget authority of $481,300,000 to be funded by two appropriations - one is the NRC's Salaraies and Expenses appropriation for $476,500,000, and the other is NRC's Office of Inspector General appropriation for $4,800,000. Of the funds appropriated to the NRC's Salaries and Expenses, $17,000,000, shall be derived from the Nuclear Waste Fund and $2,000,000 shall be derived from general funds. The proposed FY 1998 appropriation legislation would also exempt the $2,000,000 for regulatory reviews and other assistance provided to the Department of Energy from the requirement that the NRC collect 100 percent of its budget from fees. The sums appropriated to the NRC's Salaries and Expenses and NRC's Office of Inspector General shall be reduced by the amount of revenues received during FY 1998 from licensing fees, inspection services, and other services and collections, so as to result in a final FY 1998 appropriation for the NRC of an estimated $19,000,000 - the amount appropriated from the Nuclear Waste Fund and from general funds. Revenues derived from enforcement actions shall be deposited to miscellaneous receipts of the Treasury

  18. Budget estimates. Fiscal year 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    The U.S. Congress has determined that the safe use of nuclear materials for peaceful purposes is a legitimate and important national goal. It has entrusted the Nuclear Regulatory Commission (NRC) with the primary Federal responsibility for achieving that goal. The NRC`s mission, therefore, is to regulate the Nation`s civilian use of byproduct, source, and special nuclear materials to ensure adequate protection of public health and safety, to promote the common defense and security, and to protect the environment. The NRC`s FY 1998 budget requests new budget authority of $481,300,000 to be funded by two appropriations - one is the NRC`s Salaraies and Expenses appropriation for $476,500,000, and the other is NRC`s Office of Inspector General appropriation for $4,800,000. Of the funds appropriated to the NRC`s Salaries and Expenses, $17,000,000, shall be derived from the Nuclear Waste Fund and $2,000,000 shall be derived from general funds. The proposed FY 1998 appropriation legislation would also exempt the $2,000,000 for regulatory reviews and other assistance provided to the Department of Energy from the requirement that the NRC collect 100 percent of its budget from fees. The sums appropriated to the NRC`s Salaries and Expenses and NRC`s Office of Inspector General shall be reduced by the amount of revenues received during FY 1998 from licensing fees, inspection services, and other services and collections, so as to result in a final FY 1998 appropriation for the NRC of an estimated $19,000,000 - the amount appropriated from the Nuclear Waste Fund and from general funds. Revenues derived from enforcement actions shall be deposited to miscellaneous receipts of the Treasury.

  19. Analysis of local budgets revenues in the Republic of Moldova: level, structure and dynamics for 2008-2014 years

    Directory of Open Access Journals (Sweden)

    Andrei PETROIA

    2015-12-01

    Full Text Available This paper consist largely of analysis of the local budgets revenues of the Republic of Moldova for the period of 2008-2014. The analysis can not offer many information in dynamics due to the few number of years, but we tried to make an analyze of the situation. Informational support of the work are the laws and regulations of the country; data provided by the Ministry of Finance, National Bureau of Statistics and the literature. The purpose of this paper is to approach each category of income and part of it, the time evolution of local budget revenues over several consecutive years of budget income distribution in the directions of the Republic of Moldova, and analysis of each component of the local budget. In this paper, we have analyzed in dynamics structure in total revenues of local budgets, in national public budget, in state budget and in GDP. The main components analyzed were: tax and non-tax revenues, revenues without grants and transfers, grants and transfers from the state budget. Also we have attracted special attention to direct and indirect taxes, as well as their components.The necessity of this study is to present a clear and concise form of the administrative-territorial units' budget feature, conceptual notions, policies which are reflected on local revenues in Moldova. This paper aims possibility of revising the budget system structure, improve financial relations within it and its evolution, but it does not reflect fully all matters related to the budget system.

  20. Mitochondrial abundance and efficiency contribute to lean color of dark cutting beef

    Science.gov (United States)

    Beef carcasses exhibiting four levels of dark cutting severity (DCS): Severe, Moderate, Mild, and Shady were compared to Control carcasses to investigate biochemical traits contributing to the dark cutting condition. Color attributes of Longissimus lumborum (LL) were measured after grading and duri...

  1. The effect of motivation profile and participative budgeting on budget goal commitment

    DEFF Research Database (Denmark)

    Sandalgaard, Niels; Bukh, Per Nikolaj; Poulsen, Carsten Stig

    2009-01-01

    The effect of participative budgeting on motivation is often considered in management accounting research. In this study we focus on dispositional factors of motivation rooted in personality that affect budgeting. Especially we focus on the effect of personality traits in the form of achievement......, power and affiliation motives on budget goal commitment in interaction with participative budgeting. The study is based on a survey among bank managers at different organizational levels of a Scandinavian regional bank and the results indicate that the effect of participative budgeting on budget goal...... commitment is moderated by the implicit power motivation of the bank manager....

  2. Wedge cutting of mild steel by CO 2 laser and cut-quality assessment in relation to normal cutting

    Science.gov (United States)

    Yilbas, B. S.; Karatas, C.; Uslan, I.; Keles, O.; Usta, Y.; Yilbas, Z.; Ahsan, M.

    2008-10-01

    In some applications, laser cutting of wedge surfaces cannot be avoided in sheet metal processing and the quality of the end product defines the applicability of the laser-cutting process in such situations. In the present study, CO 2 laser cutting of the wedge surfaces as well as normal surfaces (normal to laser beam axis) is considered and the end product quality is assessed using the international standards for thermal cutting. The cut surfaces are examined by the optical microscopy and geometric features of the cut edges such as out of flatness and dross height are measured from the micrographs. A neural network is introduced to classify the striation patterns of the cut surfaces. It is found that the dross height and out of flatness are influenced significantly by the laser output power, particularly for wedge-cutting situation. Moreover, the cut quality improves at certain value of the laser power intensity.

  3. Chip & Cut Tests an Elastomeren

    OpenAIRE

    Euchler, Eric; Heinrich, Gert; Michael, Hannes; Gehde, Michael; Stocek, Radek; Kratina, Ondrej; Kipscholl, Reinhold

    2016-01-01

    Dieser Vortrag stellt einen neuartigen Prüfstand vor, mit welchem das Chip & Cut Verhalten von Elastomeren charakterisiert werden kann. Sowohl theoretischer Hintergrund als auch praktische Erkenntnisse werden diskutiert. Die Vorstellung der Praxisrelevanz dieser Untersuchungen steht im Fokus des Vortrags.

  4. Why I like power cuts...

    CERN Multimedia

    Computer Security Team

    2012-01-01

    Accidental power cuts - a permanent nuisance when running accelerators or computing services, since it takes a lot of time to recover from them. While I feel very sorry for those who are under pressure to get their service running again and deeply regret the loss of down-time and availability, I must admit that I like power cuts: power cuts make computers reboot! And rebooting computers at CERN means all the pending software patches are automatically applied.   But don’t think I am egotistic enough to endorse power cuts. Not necessarily! I am already happy if you regularly patch your computer(s) yourself, where regularly means at least once a month: · If you run a centrally or locally managed Windows computer, give that small orange blinking “CMF” icon in the taskbar a chance in the evening to apply all the pending patches. Also, let it initiate a reboot at the end! · If you have a personal computer with your own Windows operating system, ...

  5. Analysis of changes in paper cutting forces during the cutting cycle in single-knife guillotine

    OpenAIRE

    Rusin, Agnieszka; Petriaszwili, Georgij

    2013-01-01

    Paper presents the results of changes in the three components of cutting forces of paper stacks cutting during the cutting cycle in single-knife guillotine. The changes of the three components of cutting force at different stages of cutting cycle were analyzed.

  6. Does National Culture Impact Capital Budgeting Systems?

    Directory of Open Access Journals (Sweden)

    Peter J. Graham

    2017-06-01

    Full Text Available We examine how national culture impacts organisational selection of capital budgeting systems to develop our understanding of what influence a holistic formulation of national culture has on capital budgeting systems. Such an understanding is important as it would not only provide a clearer link between national culture and capital budgeting systems and advance extant literature but would also help multinational firms that have business relationships with Indonesian firms in suitably designing strategies. We conducted semi-structured interviews of selected finance managers of listed firms in Indonesia and Australia. Consistent with the contingency theory, we found that economic, political, legal and social uncertainty impact on the use of capital budgeting systems. The levels of uncertainty were higher in Indonesia than Australia and need to be reckoned in the selection of capital budgeting systems used by firms. We also found that firms are influenced by project size and complexity, when selecting capital budgeting systems.

  7. AGU testifies on NASA Budget

    Science.gov (United States)

    Simarski, Lynn Teo

    Witnesses from outside the U.S. government—including Frank Eden, representing AGU—testified about the National Aeronautics and Space Administration's budget on March 12 before the House Science Committee's subcommittee on space. One major topic of the hearing was familiar: what should NASA's top priority be, space science or human exploration of space.“Obviously this committee has a huge job of trying to set priorities—consistent with the budget restraints—that will end up giving the American taxpayer the most bang for his buck, as well as providing direction for our space program,” said F. James Sensenbrenner, Jr. (R-Wis.), the subcommittee's ranking Republican. Another recurring topic, cited by the subcommittee's new chairman, Ralph M. Hall (D-Tex.), as well as by other committee members, was how to translate NASA-developed technologies into commercial gain for the U.S. in the global marketplace. Hall and others also posed a number of questions on a topic the chairman called a special concern of his: whether it would be economically and scientifically plausible for the U.S. to use the Soviet space station Mir for certain activities, such as medical applications.

  8. Voting behavior and budget stability

    Directory of Open Access Journals (Sweden)

    Cristina Vicente

    2013-01-01

    Full Text Available The aim of this paper is to analyze how the implementation of the Budgetary Stability Law has affected Political Budget Cycles generated by Spanish local governments. Specifically, we study whether the evolution of debt, budget deficit, capital spending and current spending over the electoral cycle has changed after the introduction of this law. We use a sample of 132 Spanish municipalities with more than 50,000 inhabitants (including the provincial capitals during the period 1995–2009. Our results show that the Budgetary Stability Law has avoided electoral cycles in debt. On the contrary, the adoption of this law has not mitigated the incumbents’ incentives to manipulate deficit, capital spending and current spending with electoral aims. Nevertheless, it has caused a change in the way in which mayors manipulate fiscal policy over the electoral cycle. The opportunistic expansion covered both preelectoral year and the electoral year before the implementation of this fiscal rule, while after that, deficit and spending increases are confined in the election year.

  9. Budget Deficits Effects on Economic Growth

    Directory of Open Access Journals (Sweden)

    L.C.Risti

    2013-06-01

    Full Text Available The budget deficit can not be analyzed autarchically, as it affects all the macroeconomic processes and, is itself influenced by all other macroeconomic indicators. Most analyses and studies on public finance and budget balance measure the impact that budgetary deficits accumulation has on economy. Therefore, the present paper aims at following and analyzing the mutual impact between budget deficit and another economic macro indicator, namely the economic growth.

  10. Does National Culture Impact Capital Budgeting Systems?

    OpenAIRE

    Peter J. Graham; Milind Sathye

    2017-01-01

    We examine how national culture impacts organisational selection of capital budgeting systems to develop our understanding of what influence a holistic formulation of national culture has on capital budgeting systems. Such an understanding is important as it would not only provide a clearer link between national culture and capital budgeting systems and advance extant literature but would also help multinational firms that have business relationships with Indonesian firms in suita...

  11. Sediment Budget Analysis; Masonboro Inlet, North Carolina

    Science.gov (United States)

    2017-08-15

    ER D C/ CH L TR -1 7- 13 Regional Sediment Management (RSM) Program Sediment Budget Analysis; Masonboro Inlet, North Carolina Co as ta...ERDC/CHL TR-17-13 August 2017 Sediment Budget Analysis; Masonboro Inlet, North Carolina Kevin B. Conner U.S. Army Engineer District, Wilmington P...Engineers Washington, DC 20314-1000 Under Project 454632, “Sediment Budget Analysis, Masonboro Inlet, NC” ERDC/CHL TR-17-13 ii Abstract A

  12. Prediction of Cutting Force in Turning Process-an Experimental Approach

    Science.gov (United States)

    Thangarasu, S. K.; Shankar, S.; Thomas, A. Tony; Sridhar, G.

    2018-02-01

    This Paper deals with a prediction of Cutting forces in a turning process. The turning process with advanced cutting tool has a several advantages over grinding such as short cycle time, process flexibility, compatible surface roughness, high material removal rate and less environment problems without the use of cutting fluid. In this a full bridge dynamometer has been used to measure the cutting forces over mild steel work piece and cemented carbide insert tool for different combination of cutting speed, feed rate and depth of cut. The experiments are planned based on taguchi design and measured cutting forces were compared with the predicted forces in order to validate the feasibility of the proposed design. The percentage contribution of each process parameter had been analyzed using Analysis of Variance (ANOVA). Both the experimental results taken from the lathe tool dynamometer and the designed full bridge dynamometer were analyzed using Taguchi design of experiment and Analysis of Variance.

  13. A Primer on the Government of Alberta’s Budget

    Directory of Open Access Journals (Sweden)

    Ronald D. Kneebone

    2013-01-01

    Full Text Available Provincial budgets may normally make for dry reading, but in Alberta’s case, there is plenty of suspense lurking inside the pages — and that’s not necessarily a good thing. Your average family may know certain things about balancing a budget: keeping spending roughly in line with income; not relying on volatile, unpredictable income streams to cover expenses; and not leaving the kids with an inheritance of significant debt. But look at how Alberta has been managing its budget in the last decade, and it is obvious that the provincial government is breaking a lot of the financial management rules that most Albertans are disciplined enough to live by at home. A clear way to get a sense of how the Alberta government has managed its finances is by analyzing how much provincial program spending relies on depleting provincial savings, either in the form of savings funds or non-renewable resource deposits, such as oil and gas. By 2011, Alberta’s “Budget Gap” had grown to almost the same level it was in 1993, when the province was forced to adopt wrenching budget cuts in order to close what had become a yawning gap between revenue and costs amounting to $4,000 in spending for every man, woman and child in the province. This paper suggests there are three key questions that should be posed to our government and to any political party seeking to represent our interests as our government: 1. How tolerant are they of annual deficits? Do they advocate a strategy of relatively lower levels of government spending and/or higher tax rates, so as to avoid deficits no matter the state of the economy? Or will they tolerate deficits during economic slowdowns to enable higher levels of spending and/or lower tax rates? 2. To what extent are they willing to trust the payment of health-care costs and the costs of education and social assistance to oil and gas royalties as opposed to taxation? 3. How, exactly, does one define investments in social

  14. STATE BUDGET AND BUDGETARY PROCEDURES IN ROMANIA

    Directory of Open Access Journals (Sweden)

    POPA George Dorel

    2013-12-01

    Full Text Available In Romania, the budget process is governed by the Constitution and the Law of Public Finance no. 500/2002, act that includes the elaboration of the draft budget, approving the state budget, budget execution and budget control. All these activities are carried out in a legal way and administrative- institutional way, presenting features from country to country. The budget shows many traits in common: it is a decision process, because its essence consists in allocating budgetary resources for public goods such as education, health, national defence and so on. On the other hand is an essentially political process because allocation decisions budgetary resources are determined by the political groups, the mechanism of representation and voting, is a complex process with many participants (schools, hospitals, ministries, etc.. The budgetary process is a cyclic process, as it follows a well-defined calendar as a consequence of yearly and advertising budget. In conclusion, the budget process is a set of consecutive stages of development, approval, execution, control and reporting of the state budget, which ends with the approval of its execution account.

  15. INSTITUTIONAL SUPPORT OF SECURITY BUDGET OF UKRAINE

    Directory of Open Access Journals (Sweden)

    S. Onishchenko

    2016-06-01

    Full Text Available The institutional framework from positions of different conceptual approaches was examined in the article. The attention was paid the problems of institutional support budget security in Ukraine. The institutionalization of budgetary relations and especially the formation system of institutional support was investigated. The author's approach to the nature of institutional support budget security was suggested. Institutional and legal, institutional and organizational, and staffing budget security were characterized. It is concluded that the process of institutional development budget security characterized by unacceptable levels of institutional strain.

  16. OMB Recommended vs Approved Operating Budget

    Data.gov (United States)

    Montgomery County of Maryland — This dataset includes the Fiscal Year 2015 County Executive Recommended and County Council Approved operating budgets for Montgomery County, for comparison purposes....

  17. Model for Reggeon-Pomeranchukon cuts

    International Nuclear Information System (INIS)

    Chia, S.

    1977-01-01

    A model is presented for calculating Reggeon-Pomeranchukon cuts, making use explicitly of the Mandelstam diagram. External spins are treated in a natural way. Calculation for the general case is outlined and it is shown that in practical application the cut can be calculated in a standard way. Cuts associated with the exchanges of π, rho, B, and A 2 are considered, and characteristics of the RP cuts, as well as the structure functions, are extracted and discussed. It is found that the model differs considerably from the absorption model. Two suppression schemes are operative which control the magnitudes of cut contributions to amplitudes with ''naturality'' opposite to the Reggeon. The πP cut is found to be a unique case because of the smallness of the pion mass. In general, the RP cuts are self-conspiratorial. At very high energies, all cuts, except πP cut, exhibit quasifactorization

  18. Development of underwater laser cutting technology

    International Nuclear Information System (INIS)

    Sato, Seiichi; Inaba, Takanori; Inose, Koutarou; Matsumoto, Naoyuki; Sakakibara, Yuji

    2015-01-01

    In is desirable to use remote underwater device for the decommissioning work of highly radioactive components such as the nuclear internals from a view point of reducing the ranitidine exposure to the worker. Underwater laser cutting technology has advantages. First advantage in underwater laser cutting technology is that low reaction force during cutting, namely, remote operability is superior. Second point is that underwater laser cutting generates a little amount of secondary waste, because cutting kerf size is very small. Third point is that underwater laser cutting has low risk of the process delay, because device trouble is hard to happen. While underwater laser cutting has many advantages, the careful consideration in the safe treatment of the offgas which underwater laser cutting generates is necessary. This paper describes outline of underwater laser cutting technology developed by IHI Corporation (IHI) and that this technology is effective in various dismantling works in water. (author)

  19. Quality Analysis of Cutting Steel Using Laser

    Directory of Open Access Journals (Sweden)

    Vladislav Markovič

    2013-02-01

    Full Text Available The article explores the quality dependence of the edge surface of steel C45 LST EN 10083-1 obtained cutting the material using laser on different cutting regimes and variations in the thickness of trial steel. The paper presents the influence of the main modes of laser cutting equipment Trulaser 3030, including cutting speed, pressure, angle and the thickness of the surface on the quality characteristics of the sample. The quality of the edge after laser cutting is the most important indicator influencing such technological spread in industry worldwide. Laser cutting is the most popular method of material cutting. Therefore, the article focuses on cutting equipment, cutting defects and methods of analysis. Research on microstructure, roughness and micro-toughness has been performed with reference to edge samples. At the end of the publication, conclusions are drawn.Article in Lithuanian

  20. Quality Analysis of Cutting Steel Using Laser

    Directory of Open Access Journals (Sweden)

    Vladislav Markovič

    2012-12-01

    Full Text Available The article explores the quality dependence of the edge surface of steel C45 LST EN 10083-1 obtained cutting the material using laser on different cutting regimes and variations in the thickness of trial steel. The paper presents the influence of the main modes of laser cutting equipment Trulaser 3030, including cutting speed, pressure, angle and the thickness of the surface on the quality characteristics of the sample. The quality of the edge after laser cutting is the most important indicator influencing such technological spread in industry worldwide. Laser cutting is the most popular method of material cutting. Therefore, the article focuses on cutting equipment, cutting defects and methods of analysis. Research on microstructure, roughness and micro-toughness has been performed with reference to edge samples. At the end of the publication, conclusions are drawn.Article in Lithuanian

  1. Fibre laser cutting stainless steel: Fluid dynamics and cut front morphology

    Science.gov (United States)

    Pocorni, Jetro; Powell, John; Deichsel, Eckard; Frostevarg, Jan; Kaplan, Alexander F. H.

    2017-01-01

    In this paper the morphology of the laser cut front generated by fibre lasers was investigated by observation of the 'frozen' cut front, additionally high speed imaging (HSI) was employed to study the fluid dynamics on the cut front while cutting. During laser cutting the morphology and flow properties of the melt film on the cut front affect cut quality parameters such as cut edge roughness and dross (residual melt attached to the bottom of the cut edge). HSI observation of melt flow down a laser cutting front using standard cutting parameters is experimentally problematic because the cut front is narrow and surrounded by the kerf walls. To compensate for this, artificial parameters are usually chosen to obtain wide cut fronts which are unrepresentative of the actual industrial process. This paper presents a new experimental cutting geometry which permits HSI of the laser cut front using standard, commercial parameters. These results suggest that the cut front produced when cutting medium section (10 mm thick) stainless steel with a fibre laser and a nitrogen assist gas is covered in humps which themselves are covered by a thin layer of liquid. HSI observation and theoretical analysis reveal that under these conditions the humps move down the cut front at an average speed of approximately 0.4 m/s while the covering liquid flows at an average speed of approximately 1.1 m/s, with an average melt depth at the bottom of the cut zone of approximately 0.17 mm.

  2. The Australian terrestrial carbon budget

    Directory of Open Access Journals (Sweden)

    V. Haverd

    2013-02-01

    Full Text Available This paper reports a study of the full carbon (C-CO2 budget of the Australian continent, focussing on 1990–2011 in the context of estimates over two centuries. The work is a contribution to the RECCAP (REgional Carbon Cycle Assessment and Processes project, as one of numerous regional studies. In constructing the budget, we estimate the following component carbon fluxes: net primary production (NPP; net ecosystem production (NEP; fire; land use change (LUC; riverine export; dust export; harvest (wood, crop and livestock and fossil fuel emissions (both territorial and non-territorial. Major biospheric fluxes were derived using BIOS2 (Haverd et al., 2012, a fine-spatial-resolution (0.05° offline modelling environment in which predictions of CABLE (Wang et al., 2011, a sophisticated land surface model with carbon cycle, are constrained by multiple observation types. The mean NEP reveals that climate variability and rising CO2 contributed 12 ± 24 (1σ error on mean and 68 ± 15 TgC yr−1, respectively. However these gains were partially offset by fire and LUC (along with other minor fluxes, which caused net losses of 26 ± 4 TgC yr−1 and 18 ± 7 TgC yr−1, respectively. The resultant net biome production (NBP is 36 ± 29 TgC yr−1, in which the largest contributions to uncertainty are NEP, fire and LUC. This NBP offset fossil fuel emissions (95 ± 6 TgC yr−1 by 38 ± 30%. The interannual variability (IAV in the Australian carbon budget exceeds Australia's total carbon emissions by fossil fuel combustion and is dominated by IAV in NEP. Territorial fossil fuel emissions are significantly smaller than the rapidly growing fossil fuel exports: in 2009–2010, Australia exported 2.5 times more carbon in fossil fuels than it emitted by burning fossil fuels.

  3. Laser Cutting of Thin Nickel Bellows

    Science.gov (United States)

    Butler, C. L.

    1986-01-01

    Laser cutting technique produces narrow, precise, fast, and repeatable cuts in thin nickel-allow bellows material. Laser cutting operation uses intense focused beam to melt material and assisting gas to force melted material through part thickness, creating void. When part rotated or moved longitudinally, melting and material removal continuous and creates narrow, fast, precise, and repeatable cut. Technique used to produce cuts of specified depths less than material thickness. Avoids distortion, dents, and nicks produced in delicate materials during lathe trimming operations, which require high cutting-tool pressure and holding-fixture forces.

  4. Estimation of Forest Fire-fighting Budgets Using Climate Indexes

    OpenAIRE

    Zhen Xu; G. Cornelis van Kooten

    2012-01-01

    Given the complexity and relative short length of current predicting system for fire behavior, it is inappropriate to be referred for planning fire-fighting budgets of BC government due to the severe uncertainty of fire behavior across fire seasons. Therefore, a simple weather derived index for predicting fire frequency and burned area is developed in this paper to investigate the potential feasibility to predict fire behavior and fire-fighting expenses for the upcoming fire season using clim...

  5. The generalized good cut equation

    International Nuclear Information System (INIS)

    Adamo, T M; Newman, E T

    2010-01-01

    The properties of null geodesic congruences (NGCs) in Lorentzian manifolds are a topic of considerable importance. More specifically NGCs with the special property of being shear-free or asymptotically shear-free (as either infinity or a horizon is approached) have received a great deal of recent attention for a variety of reasons. Such congruences are most easily studied via solutions to what has been referred to as the 'good cut equation' or the 'generalization good cut equation'. It is the purpose of this paper to study these equations and show their relationship to each other. In particular we show how they all have a four-complex-dimensional manifold (known as H-space, or in a special case as complex Minkowski space) as a solution space.

  6. Water-Cut Sensor System

    KAUST Repository

    Karimi, Muhammad Akram

    2018-01-11

    Provided in some embodiments is a method of manufacturing a pipe conformable water-cut sensors system. Provided in some embodiments is method for manufacturing a water-cut sensor system that includes providing a helical T-resonator, a helical ground conductor, and a separator at an exterior of a cylindrical pipe. The helical T-resonator including a feed line, and a helical open shunt stub conductively coupled to the feed line. The helical ground conductor including a helical ground plane opposite the helical open shunt stub and a ground ring conductively coupled to the helical ground plane. The feed line overlapping at least a portion of the ground ring, and the separator disposed between the feed line and the portion of the ground ring overlapped by the feed line to electrically isolate the helical T-resonator from the helical ground conductor.

  7. Entropy Budget for Hawking Evaporation

    Directory of Open Access Journals (Sweden)

    Ana Alonso-Serrano

    2017-07-01

    Full Text Available Blackbody radiation, emitted from a furnace and described by a Planck spectrum, contains (on average an entropy of 3 . 9 ± 2 . 5 bits per photon. Since normal physical burning is a unitary process, this amount of entropy is compensated by the same amount of “hidden information” in correlations between the photons. The importance of this result lies in the posterior extension of this argument to the Hawking radiation from black holes, demonstrating that the assumption of unitarity leads to a perfectly reasonable entropy/information budget for the evaporation process. In order to carry out this calculation, we adopt a variant of the “average subsystem” approach, but consider a tripartite pure system that includes the influence of the rest of the universe, and which allows “young” black holes to still have a non-zero entropy; which we identify with the standard Bekenstein entropy.

  8. The carbon budget of California

    International Nuclear Information System (INIS)

    Potter, Christopher

    2010-01-01

    The carbon budget of a region can be defined as the sum of annual fluxes of carbon dioxide (CO 2 ) and methane (CH 4 ) greenhouse gases (GHGs) into and out of the regional surface coverage area. According to the state government's recent inventory, California's carbon budget is presently dominated by 115 MMTCE per year in fossil fuel emissions of CO 2 (>85% of total annual GHG emissions) to meet energy and transportation requirements. Other notable (non-ecosystem) sources of carbon GHG emissions in 2004 were from cement- and lime-making industries (7%), livestock-based agriculture (5%), and waste treatment activities (2%). The NASA-CASA (Carnegie Ames Stanford Approach) simulation model based on satellite observations of monthly vegetation cover (including those from the Moderate Resolution Imaging Spectroradiometer, MODIS) was used to estimate net ecosystem fluxes and vegetation biomass production over the period 1990-2004. California's annual NPP for all ecosystems in the early 2000s (estimated by CASA at 120 MMTCE per year) was roughly equivalent to its annual fossil fuel emission rates for carbon. However, since natural ecosystems can accumulate only a small fraction of this annual NPP total in long-term storage pools, the net ecosystem sink flux for atmospheric carbon across the state was estimated at a maximum rate of about 24 MMTCE per year under favorable precipitation conditions. Under less favorable precipitation conditions, such as those experienced during the early 1990s, ecosystems statewide were estimated to have lost nearly 15 MMTCE per year to the atmosphere. Considering the large amounts of carbon estimated by CASA to be stored in forests, shrublands, and rangelands across the state, the importance of protection of the natural NPP capacity of California ecosystems cannot be overemphasized.

  9. Optimizing cutting conditions on sustainable machining of aluminum alloy to minimize power consumption

    Science.gov (United States)

    Nur, Rusdi; Suyuti, Muhammad Arsyad; Susanto, Tri Agus

    2017-06-01

    Aluminum is widely utilized in the industrial sector. There are several advantages of aluminum, i.e. good flexibility and formability, high corrosion resistance and electrical conductivity, and high heat. Despite of these characteristics, however, pure aluminum is rarely used because of its lacks of strength. Thus, most of the aluminum used in the industrial sectors was in the form of alloy form. Sustainable machining can be considered to link with the transformation of input materials and energy/power demand into finished goods. Machining processes are responsible for environmental effects accepting to their power consumption. The cutting conditions have been optimized to minimize the cutting power, which is the power consumed for cutting. This paper presents an experimental study of sustainable machining of Al-11%Si base alloy that was operated without any cooling system to assess the capacity in reducing power consumption. The cutting force was measured and the cutting power was calculated. Both of cutting force and cutting power were analyzed and modeled by using the central composite design (CCD). The result of this study indicated that the cutting speed has an effect on machining performance and that optimum cutting conditions have to be determined, while sustainable machining can be followed in terms of minimizing power consumption and cutting force. The model developed from this study can be used for evaluation process and optimization to determine optimal cutting conditions for the performance of the whole process.

  10. Variable angle asymmetric cut monochromator

    International Nuclear Information System (INIS)

    Smither, R.K.; Fernandez, P.B.

    1993-09-01

    A variable incident angle, asymmetric cut, double crystal monochromator was tested for use on beamlines at the Advanced Photon Source (APS). For both undulator and wiggler beams the monochromator can expand area of footprint of beam on surface of the crystals to 50 times the area of incident beam; this will reduce the slope errors by a factor of 2500. The asymmetric cut allows one to increase the acceptance angle for incident radiation and obtain a better match to the opening angle of the incident beam. This can increase intensity of the diffracted beam by a factor of 2 to 5 and can make the beam more monochromatic, as well. The monochromator consists of two matched, asymmetric cut (18 degrees), silicon crystals mounted so that they can be rotated about three independent axes. Rotation around the first axis controls the Bragg angle. The second rotation axis is perpendicular to the diffraction planes and controls the increase of the area of the footprint of the beam on the crystal surface. Rotation around the third axis controls the angle between the surface of the crystal and the wider, horizontal axis for the beam and can make the footprint a rectangle with a minimum. length for this area. The asymmetric cut is 18 degrees for the matched pair of crystals, which allows one to expand the footprint area by a factor of 50 for Bragg angles up to 19.15 degrees (6 keV for Si[111] planes). This monochromator, with proper cooling, will be useful for analyzing the high intensity x-ray beams produced by both undulators and wigglers at the APS

  11. Drill cuttings mount formation study

    Science.gov (United States)

    Teh, Su Yean; Koh, Hock Lye

    2014-07-01

    Oil, Gas and Energy sector has been identified as an essential driving force in the Malaysian Economic Transformation Programs (ETP). Recently confirmed discovery of many offshore oil and gas deposits in Malaysian waters has ignited new confidence in this sector. However, this has also spurred intense interest on safeguarding the health and environment of coastal waters in Malaysia from adverse impact resulting from offshore oil and gas production operation. Offshore discharge of spent drilling mud and rock cuttings is the least expensive and simplest option to dispose of large volumes of drilling wastes. But this onsite offshore disposal may have adverse environmental impacts on the water column and the seabed. It may also pose occupational health hazards to the workers living in the offshore platforms. It is therefore important to model the transport and deposition of drilling mud and rock cuttings in the sea to enable proper assessment of their adverse impacts on the environment and the workers. Further, accumulation of drill particles on the seabed may impede proper operation of pipelines on the seabed. In this paper, we present an in-house application model TUNA-PT developed to cater to local oil and gas industry needs to simulate the dispersion and mount formation of drill cuttings by offshore oil and gas exploration and production platforms. Using available data on Malaysian coastal waters, simulation analyses project a pile formation on the seabed with a maximum height of about 1 m and pile radius of around 30 to 50 m. Simulated pile heights are not sensitive to the heights of release of the cuttings as the sensitivity has been mitigated by the depth of water.

  12. Successful Control of Major Project Budgets

    Directory of Open Access Journals (Sweden)

    Steen Lichtenberg

    2016-07-01

    Full Text Available This paper differs from scientific papers describing current research. In line with the theme of this special issue, it challenges conventional risk management practice against the background of former research results successfully finished decades ago. It is well-known that conventional practice frequently results in budget overruns of large projects. International reviews document that. Severe delays of schedules are also well-known. This paper describes successful research results from almost three decades ago, which successfully challenges this severe problem and has led to new practices. The research involved is an unusual mix: Scandinavian researchers from psychology, statistical theory and engineering economy. The resulting procedure has been widely used since around 1990 and challenges conventional procedures. The procedure is documented to be able to yield statistically correct prognoses, when the “rules of the game” have been correctly followed. After a short summary of the basic situation, this paper summarizes the research, followed by some resulting experiences, focusing on two recent studies each of 40 infrastructures and other major projects. In both sets, the actual final cost largely equaled the expected project cost. This result is a marked change from international past and present experience. Finally, the need for further research and progress is discussed.

  13. Lean Mean Times--Budgeting for School Media Technology.

    Science.gov (United States)

    Johnson, Doug

    1995-01-01

    Discusses budgeting strategies for school media technology programs. Highlights include sources for school funding, school district budget information, control of the budget, how to write an effective budget, working with other community and school groups, local politics, and sidebars that discuss spreadsheets and maintenance budgets. (LRW)

  14. Budget of the U.S. Government, Fiscal Year 2013

    Science.gov (United States)

    Office of Management and Budget, Executive Office of the President, 2012

    2012-01-01

    "Budget of the United States Government, Fiscal Year 2013" contains the Budget Message of the President, information on the President's priorities, budget overviews organized by agency, and summary tables. The 2013 Budget contains a number of steps to put the country on a fiscally sustainable path. First, this Budget implements the tight…

  15. 7 CFR 1744.63 - The telephone loan budget.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false The telephone loan budget. 1744.63 Section 1744.63... Disbursement of Funds § 1744.63 The telephone loan budget. When the loan is made, RUS provides the borrower a Telephone Loan Budget, RUS Form 493. This budget divides the loan into budget accounts such as “Engineering...

  16. Decentralized Budgeting: Getting the Most Out of Disbursements of Funds.

    Science.gov (United States)

    Jefferson, Anne L.

    1995-01-01

    Decentralizing educational budgets allows the disbursement of funds aimed at maximizing student development. Three strategies for decentralizing budgets are program budgeting, which eliminates line-item budgeting and allows administrators to address questions regarding the relative value of educational programs; zero-based budgeting, which allows…

  17. On-line Cutting Tool Condition Monitoring in Machining Processes Using Artificial Intelligence

    OpenAIRE

    Vallejo, Antonio J.; Morales-Menéndez, Rub&#;n; Alique, J.R.

    2008-01-01

    This chapter presented new ideas for monitoring and diagnosis of the cutting tool condition with two different algorithms for pattern recognition: HMM, and ANN. The monitoring and diagnosis system was implemented for peripheral milling process in HSM, where several Aluminium alloys and cutting tools were used. The flank wear (VB) was selected as the criterion to evaluate the tool's life and four cutting tool conditions were defined to be recognized: New, half new, half worn, and worn conditio...

  18. Budget Setting Strategies for the Company's Divisions

    NARCIS (Netherlands)

    Berg, M.; Brekelmans, R.C.M.; De Waegenaere, A.M.B.

    1997-01-01

    The paper deals with the issue of budget setting to the divisions of a company. The approach is quantitative in nature both in the formulation of the requirements for the set-budgets, as related to different general managerial objectives of interest, and in the modelling of the inherent

  19. Reading a District Budget: Reporter Guide

    Science.gov (United States)

    McNeil, Michele

    2013-01-01

    Every school budget tells a story--about a district's spending plan, its priorities, goals, and financial health. The challenge is to wade through the jargon and numbers to unlock that story. Although budgets can vary significantly from district to district, and state to state, this primer seeks to introduce reporters to the fundamental components…

  20. The Budget. Introduction to Financial Management.

    Science.gov (United States)

    Strong, Dexter K.

    A school budget is a carefully drawn plan to allow for the efficient educational operation of the school. Everyone connected with the management of an independent school has something to learn about a budget, the most obvious person being the new headmaster. Similarly, all department heads, the librarian, the athletic director, the members of the…

  1. Children's Budget 2016. 10th Anniversary Edition

    Science.gov (United States)

    Monsif, John, Ed.; Gluck, Elliott, Ed.

    2016-01-01

    Federal spending dedicated to children represents just 7.83 percent of the federal budget in fiscal year 2016, and total spending on children's programs has decreased by five percent in the last two years, according to "Children's Budget 2016." The federal government makes more than 200 distinct investments in children. These include…

  2. Uncertainty Propagation in an Ecosystem Nutrient Budget.

    Science.gov (United States)

    New aspects and advancements in classical uncertainty propagation methods were used to develop a nutrient budget with associated error for a northern Gulf of Mexico coastal embayment. Uncertainty was calculated for budget terms by propagating the standard error and degrees of fr...

  3. Zero Based Budgeting for Voc Ed

    Science.gov (United States)

    Chuang, Ying C.

    1977-01-01

    To help vocational education budget planners take a good look each year at where they are going, what they are trying to accomplish, and where to put their money, this article describes the 12 steps in a model commonly used for zero based budgeting. (Author/HD)

  4. Taking Another Path: Community-Based Budgeting

    Science.gov (United States)

    Malinowski, Matthew J.; Davis, Darlene G.

    2011-01-01

    Given the current economic constraints facing the country, school districts in the U.S. have been pushed to develop annual budgets through a new lens and to accept the reality that budget adoption is a complex, political process. Whether a school district is rich or poor, growing or declining in enrollment, serving a specialized population or…

  5. Aqueous cutting fluid for machining fissionable materials

    Science.gov (United States)

    Duerksen, Walter K.; Googin, John M.; Napier, Jr., Bradley

    1984-01-01

    The present invention is directed to a cutting fluid for machining fissionable material. The cutting fluid is formed of glycol, water and boron compound in an adequate concentration for effective neutron attenuation so as to inhibit criticality incidents during machining.

  6. Submerged cutting characteristics of abrasive suspension jet

    International Nuclear Information System (INIS)

    Shimizu, Seiji; Peng, Guoyi; Oguma, Yasuyuki; Nishikata, Hiroyuki

    2015-01-01

    An abrasive suspension jet (ASJ) formed by propelling abrasive suspension through a nozzle has a greater cutting capability than the conventional abrasive water jet. However the cutting capability of submerged ASJs decreases drastically with increasing the standoff distance and the pressure around the jet. A sheathed nozzle with ventilation for ASJs has been developed as a mean of extending the effective stand-off distance and improving the cutting capabilities under submerged condition. In the present investigation, cutting tests by ASJs in air and under submerged condition are conducted with specimens of aluminum alloy. Air coated ASJs are formed by using a sheathed nozzle with ventilation. The relative cutting depth is defined as the cutting depth under submerged condition divided by the cutting depth in air at the same standoff distance. The relative cutting depth is arranged effectually by the cavitation number based on the cavity pressure measured at the sheath. (author)

  7. Method of cutting radioactivated metal structures

    International Nuclear Information System (INIS)

    Takimoto, Yoshinori; Sakota, Kotaro; Hamamoto, Noboru; Harada, Keizo.

    1985-01-01

    Purpose: To improve the cutting performance to a level as comparable with that in air, as well as prevent the scattering of the radioactive materials upon cutting to the level as that in water cutting. Method: After igniting a gas cutting torch automatically, water spray by the local water sprayer is started by the actuation of a submerged pump, while a gas cutting manipulator is operated to cut the nuclear reactor pressure vessel. In this way, cutting exhaust gases resulted from the gas cutting torch are water-washed by the spray from the local water sprayer and falls within the nuclear rector pressure vessel in the form of water streams or droplets along the inner wall surface of the pressure vessel. Further, water is fed again to the local water sprayer by the submerged pump. (Kawakami, Y.)

  8. User Oriented Climatic Information for Planning a Snow Removal Budget.

    Science.gov (United States)

    Cohen, Stewart J.

    1981-12-01

    Many activities associated with the transportation sector are weather sensitive. This study is concerned with highway maintenance activities, specifically snow removal, and the budgeting of same by the Illinois Department of Transportation (IDOT). During the 1978-79 winter, IDOT's snow removal budget was exhausted by the end of January, thereby necessitating the procurement of emergency funds. The following year, the Illinois State Water Survey (ISWS) was asked to provide specialized climatic design information that could be used to assist IDOT in its budget planning for snow removal.Snow removal is often accomplished by spreading road salt over snow- and ice-covered roads, thus improving traction and reducing the risk of vehicles skidding along slippery surfaces. This study demonstrates the computation of `salt days,' a user-oriented climatic variable that indicates the number of days when road salt is required. This variable is defined using certain temperature and snowfall criteria. Results of a pilot study indicate that it is possible to provide statistical outlooks for salt days two months in advance, using correlation analysis. The analysis for several Illinois stations indicates that at various intervals in the data records, November and December temperatures are significantly correlated with February salt days if short periods of record (5-20 years) are used.IDOT originally requested a `2- to 3-month projection.' However, it became clear that only projections of 12 months or longer could benefit annual budget preparation. Confusion existed between the user and the supplier of climatic information regarding the user's needs, and the applicability of the supplier's `climate products' to the user's budget planning procedure. This demonstrates the need for a prolonged effort by the supplier to fully acquaint the user with the various forms of climatic information available. This gap in communication must be overcome so that applied climatology can be integrated

  9. Identification of Error Terms in Regional Water Budgets

    Science.gov (United States)

    Saxe, S.; Farmer, W. H.; Hay, L.

    2017-12-01

    A water balance requires that storage increase in a watershed or some specified domain whenever the inputs exceed the outputs. A simple model will assign the change in groundwater storage to the change in storage (𝚫S), inputs will consider only precipitation (P), and outputs will consider only actual evapotranspiration (AET) and runoff (Q). However, for each component— 𝚫S, P, AET, and Q—there are errors in measurements and uncertainty in the conceptual and numerical models used to extrapolate these measurements to a wide range of temporal and spatial scales. This talk will present our attempt to close the water budget for all regions of the nation using moderate resolution estimates of 𝚫S, P, AET, and Q. For each component, a variety of gridded products were compiled and aggregated at the Hydrologic Unit Code (HUC)-2 (hundreds of thousands of square kilometers) through HUC-8 (hundreds of square kilometers) levels. For each region, a water balance was computed to estimate changes in storage and assign levels of confidence to these estimates. For a simple baseline budget calculated for regions across the continental United States, using estimates of 𝚫S, P, AET, and Q over a 13 year period from 2002 to 2015, the storage of water is increasing in the southwestern United States, at the same time that it is decreasing in the Pacific Northwest, the northern Rockies, the Midwest, and most of the east coast. Whereas 𝚫S shows statistically significant increasing/decreasing trends (depending on region) over the 13 year period, the trends are not always supported by corresponding estimates of P, AET, and Q. This simple water budget excludes several potentially important components, including soil moisture, recharge, snow-water equivalence, etc. that may account for the discrepancy. This research finds that there are substantial volumes of water missing from a simple, baseline water budget and that inclusion of more components may

  10. Study of Cutting Edge Temperature and Cutting Force of End Mill Tool in High Speed Machining

    Directory of Open Access Journals (Sweden)

    Kiprawi Mohammad Ashaari

    2017-01-01

    Full Text Available A wear of cutting tools during machining process is unavoidable due to the presence of frictional forces during removing process of unwanted material of workpiece. It is unavoidable but can be controlled at slower rate if the cutting speed is fixed at certain point in order to achieve optimum cutting conditions. The wear of cutting tools is closely related with the thermal deformations that occurred between the frictional contact point of cutting edge of cutting tool and workpiece. This research paper is focused on determinations of relationship among cutting temperature, cutting speed, cutting forces and radial depth of cutting parameters. The cutting temperature is determined by using the Indium Arsenide (InAs and Indium Antimonide (InSb photocells to measure infrared radiation that are emitted from cutting tools and cutting forces is determined by using dynamometer. The high speed machining process is done by end milling the outer surface of carbon steel. The signal from the photocell is digitally visualized in the digital oscilloscope. Based on the results, the cutting temperature increased as the radial depth and cutting speed increased. The cutting forces increased when radial depth increased but decreased when cutting speed is increased. The setup for calibration and discussion of the experiment will be explained in this paper.

  11. Optical Cutting Interruption Sensor for Fiber Lasers

    Directory of Open Access Journals (Sweden)

    Benedikt Adelmann

    2015-09-01

    Full Text Available We report on an optical sensor system attached to a 4 kW fiber laser cutting machine to detect cutting interruptions. The sensor records the thermal radiation from the process zone with a modified ring mirror and optical filter arrangement, which is placed between the cutting head and the collimator. The process radiation is sensed by a Si and InGaAs diode combination with the detected signals being digitalized with 20 kHz. To demonstrate the function of the sensor, signals arising during fusion cutting of 1 mm stainless steel and mild steel with and without cutting interruptions are evaluated and typical signatures derived. In the recorded signals the piercing process, the laser switch on and switch off point and waiting period are clearly resolved. To identify the cutting interruption, the signals of both Si and InGaAs diodes are high pass filtered and the signal fluctuation ranges being subsequently calculated. Introducing a correction factor, we identify that only in case of a cutting interruption the fluctuation range of the Si diode exceeds the InGaAs diode. This characteristic signature was successfully used to detect 80 cutting interruptions of 83 incomplete cuts (alpha error 3.6% and system recorded no cutting interruption from 110 faultless cuts (beta error of 0. This particularly high detection rate in combination with the easy integration of the sensor, highlight its potential for cutting interruption detection in industrial applications.

  12. Improving rooting uniformity in rose cuttings

    NARCIS (Netherlands)

    Telgen, van H.J.; Eveleens-Clark, B.A.; Garcia Victoria, N.

    2007-01-01

    Studies to improve rooting uniformity of single node stem cuttings for rose are reported. We found that the variation in shoot growth in a young rose crop depended on the variation in root number of the cuttings, which, in turn, was related to the auxin concentration applied to the cutting before

  13. STATE BUDGET APPROPRIATION MANAGERS AS THE SUBJECTS OF BUDGET PLANNING IN THE REPUBLIC OF LITHUANIA

    Directory of Open Access Journals (Sweden)

    Bronius Sudavicius

    2017-01-01

    Full Text Available The subject. The article deals with the problem of legal status of the state budget appropriation managers in the process of budget planning in the Republic of Lithuania.The purpose of the article is evaluation of state budget appropriation managers’ role in the process of budget planning in the Republic of Lithuania.The methodology of research is the analysis of the budgetary legislation of the Republic of Lithuania and the scientific literature, using the methods of logical and systematic analysis and other methods of scientific researchMain results, and scope of it’s application. The legal definition and the system of state budget appropriation managers is analyzed in the article. Particular attention is given to the question of role of state budget appropriation managers in the process of budget framework. The role of the Government and Parliament, as well as a special body of management of public finances (in the Republic of Lithuania, the Ministry of Finance – legislative and executive authorities – is emphasized in the scientific literature. But it is often not mentioned what an important place in this process other participants of budgetary relations – state budget appropriation managers – takes. The main participation of state budget appropriation managers in the budget planning process related to the planning of the budget expenditures.Preparation of strategic plans and programmes of budgetary funds by state budget appropriation managers can be considered part of governance activities in general. For budget planning drawn up draft budgets of the programs by state budget appropriation managers is particularly important.Conclusions. The efficiency of the use of state funds depends on the spending of funds, the quality and validity of the developed programmes of activities led by their agencies. State budget appropriation managers are involved, along with other entities, on each stage of the budget planning. They provide the

  14. Voting behavior and budget stability

    Directory of Open Access Journals (Sweden)

    Cristina Vicente

    2013-06-01

    Full Text Available The aim of this paper is to analyze how the implementation of the Budgetary Stability Law has affectedPolitical Budget Cycles generated by Spanish local governments. Specifically, we study whether the evolutionof debt, budget deficit, capital spending and current spending over the electoral cycle has changed after theintroduction of this law. We use a sample of 132 Spanish municipalities with more than 50,000 inhabitants(including the provincial capitals during the period 1995‑2009. Our results show that the Budgetary StabilityLaw has avoided electoral cycles in debt. On the contrary, the adoption of this law has not mitigated theincumbents’ incentives to manipulate deficit, capital spending and current spending with electoral aims.Nevertheless, it has caused a change in the way in which mayors manipulate fiscal policy over the electoralcycle. The opportunistic expansion covered both preelectoral year and the electoral year before theimplementation of this fiscal rule, while after that, deficit and spending increases are confined in the electionyear.En este trabajo analizamos la influencia de la entrada en vigor de la Ley de Estabilidad Presupuestaria en losCiclos Políticos Presupuestarios generados por los gobiernos locales españoles. En concreto, estudiamos si laevolución de la deuda, del déficit, del gasto de capital y del gasto corriente a lo largo del ciclo electoral se havisto modificada tras la introducción de dicha ley. Para ello utilizamos una muestra formada por132 municipios españoles con más de 50.000 habitantes (incluidas las capitales de provincia durante elperiodo 1995‑2009. Nuestros resultados muestran que la Ley de Estabilidad Presupuestaria ha evitado lacreación de Ciclos Políticos Presupuestarios en la deuda. Por el contrario, la aprobación de dicha ley noha atenuado los incentivos de los políticos para manipular el déficit, el gasto de capital y el gasto corriente conla finalidad de permanecer en el poder

  15. The Budget and Economic Outlook: Fiscal Years 2006 to 2015

    National Research Council Canada - National Science Library

    Holland, Jeffrey; Blom, Barry; Arnold, Robert; Trimarco, Gerard; Booth, Mark; Hays, Ellen; Russek, Frank; Brauer, David; Futrell, Ann; Smith, Jennifer

    2005-01-01

    .... It satisfies the requirement of section 202(e) of the Congressional Budget Act of 1974 for CBO to submit to the Committees on the Budget periodic reports about fiscal policy and to provide baseline projections of the federal budget...

  16. STRATEGIC PLANNING AND PROGRAM BUDGETING IN ROMANIA – RECENT DEVELOPMENTS

    Directory of Open Access Journals (Sweden)

    D#259;nule#539;iu Dan-Constantin

    2009-05-01

    Full Text Available The paper emphasizes the efforts of Romanian authorities to implement program budgeting. Based on the first results, authorities decided to establish a link between strategic planning and budgeting, as a condition for implementing multi-annual budgeting.

  17. Free-piston cutting machine

    Science.gov (United States)

    Ciccarelli, Gaby; Subudhi, Manomohan; Hall, Robert E.

    2000-01-01

    A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

  18. Clinically lean; "cutting the crap".

    Science.gov (United States)

    Caldwell, G

    2012-01-01

    Proponents of Lean Philosophy believe that successful businesses must reduce waste in working time and resources to a minimum, and maximise their use in productive work. The productive work of the Acute Medical Unit is to provide effective clinical management to a daily cohort of acutely ill patients. Many Clinicians are cynical about Lean. In this article, Dr Caldwell discusses how many clinicians complain of too much crap in the workplace, which gets in the way of swift, safe high quality clinical care. He argues that "Cutting the Crap" in the Acute Medical Unit is entirely consistent with Lean approaches to management of complex systems.

  19. Laser Cutting of Carbon Fiber Fabrics

    Science.gov (United States)

    Fuchs, A. N.; Schoeberl, M.; Tremmer, J.; Zaeh, M. F.

    Due to their high weight-specific mechanical stiffness and strength, parts made from carbon fiber reinforced polymers (CFRP) are increasingly used as structural components in the aircraft and automotive industry. However, the cutting of preforms, as with most automated manufacturing processes for CFRP components, has not yet been fully optimized. This paper discusses laser cutting, an alternative method to the mechanical cutting of preforms. Experiments with remote laser cutting and gas assisted laser cutting were carried out in order to identify achievable machining speeds. The advantages of the two different processes as well as their fitness for use in mass production are discussed.

  20. Automated Laser Cutting In Three Dimensions

    Science.gov (United States)

    Bird, Lisa T.; Yvanovich, Mark A.; Angell, Terry R.; Bishop, Patricia J.; Dai, Weimin; Dobbs, Robert D.; He, Mingli; Minardi, Antonio; Shelton, Bret A.

    1995-01-01

    Computer-controlled machine-tool system uses laser beam assisted by directed flow of air to cut refractory materials into complex three-dimensional shapes. Velocity, position, and angle of cut varied. In original application, materials in question were thermally insulating thick blankets and tiles used on space shuttle. System shapes tile to concave or convex contours and cuts beveled edges on blanket, without cutting through outer layer of quartz fabric part of blanket. For safety, system entirely enclosed to prevent escape of laser energy. No dust generated during cutting operation - all material vaporized; larger solid chips dislodged from workpiece easily removed later.

  1. Budget-makers and health care systems.

    Science.gov (United States)

    White, Joseph

    2013-10-01

    Health programs are shaped by the decisions made in budget processes, so how budget-makers view health programs is an important part of making health policy. Budgeting in any country involves its own policy community, with key players including budgeting professionals and political authorities. This article reviews the typical pressures on and attitudes of these actors when they address health policy choices. The worldview of budget professionals includes attitudes that are congenial to particular policy perspectives, such as the desire to select packages of programs that maximize population health. The pressures on political authorities, however, are very different: most importantly, public demand for health care services is stronger than for virtually any other government activity. The norms and procedures of budgeting also tend to discourage adoption of some of the more enthusiastically promoted health policy reforms. Therefore talk about rationalizing systems is not matched by action; and action is better explained by the need to minimize blame. The budget-maker's perspective provides insight about key controversies in healthcare policy such as decentralization, competition, health service systems as opposed to health insurance systems, and dedicated vs. general revenue finance. It also explains the frequency of various "gaming" behaviors. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  2. Analysis of Health Sector Budget of Nepal.

    Science.gov (United States)

    Dulal, R K; Magar, A; Karki, S D; Khatiwada, D; Hamal, P K

    2014-01-01

    Primarily, health sector connects two segments - medicine and public health, where medicine deals with individual patients and public health with the population health. Budget enables both the disciplines to function effectively. The Interim Constitution of Nepal, 2007 has adapted the inspiration of federalism and declared the provision of basic health care services free of cost as a fundamental right, which needs strengthening under foreseen federalism. An observational retrospective cohort study, aiming at examining the health sector budget allocation and outcome, was done. Authors gathered health budget figures (2001 to 2013) and facts published from authentic sources. Googling was done for further information. The keywords for search used were: fiscal federalism, health care, public health, health budget, health financing, external development partner, bilateral and multilateral partners and healthcare accessibility. The search was limited to English and Nepali-language report, articles and news published. Budget required to meet the population's need is still limited in Nepal. The health sector budget could not achieve even gainful results due to mismatch in policy and policy implementation despite of political commitment. Since Nepal is transforming towards federalism, an increased complexity under federated system is foreseeable, particularly in the face of changed political scenario and its players. It should have clear goals, financing policy and strict implementation plans for budget execution, task performance and achieving results as per planning. Additionally, collection of revenue, risk pooling and purchasing of services should be better integrated between central government and federated states to horn effectiveness and efficiency.

  3. Zero-based budgeting: implications for social services?

    Science.gov (United States)

    Otten, G L

    1977-01-01

    It is now fact that there is a commitment to the implementation of Zero-Based Budgeting (ZBB) at the federal level. In all likelihood, the adoption of the zero-based approach will have unique implications for the administration and administrators of social service agencies. The following article explores the impetus behind budgetary reform, with a primary focus on the current appeal of ZBB. The author strongly suggests that there are similarities between the now passé Planning, Programming, and Budgeting System and ZBB that permit inferences about any implementation difficulties that ZBB may experience. It is further suggested that ZBB will present social workers with situations and opportunities that will severely challenge many on their current approaches to social service administration.

  4. An Investigation of Undefined Cut Scores with the Hofstee Standard-Setting Method

    Science.gov (United States)

    Wyse, Adam E.; Babcock, Ben

    2017-01-01

    This article provides an overview of the Hofstee standard-setting method and illustrates several situations where the Hofstee method will produce undefined cut scores. The situations where the cut scores will be undefined involve cases where the line segment derived from the Hofstee ratings does not intersect the score distribution curve based on…

  5. Cutting using the CO laser. Trennen mit dem CO-Laser

    Energy Technology Data Exchange (ETDEWEB)

    Maisenhaelder, F.; Stoehr, M. (DLR, Inst. fuer Technische Physik, Stuttgart (Germany))

    1991-02-01

    Several cutting experiments were performed to investigate the maximum cutting speed when using CO or CO{sub 2} laser radiation. The material which was used for these experiments was mild steel (St 37) and stainless steel (V2A; X5CrNi 189), the material thickness varied from 0.5 mm to 4 mm. The cutting parameters, especially the focal power density and the focal diameter, were equal for both laser wavelengths. The experimental result shows an increased cutting speed with CO laser beams in comparison to CO{sub 2} laser beams.

  6. Rooting of stem cuttings of ixora

    Directory of Open Access Journals (Sweden)

    Aline De Souza Silva

    2015-08-01

    Full Text Available The ixora is ornamental plant widely used in landscaping. In order to maximize the propagation of cuts, we evaluated the concentrations of auxin (indolbutiric acid and the presence of leaves on the rooting in cuts of Ixora coccinea L. The experiment was conducted in randomized block design, in factorial design 3x4, with three types of cuts (without leaf, with two or four leaves, four concentrations of indolbutiric acid (0, 1000, 2000 and 4000 mg L-1, with four replications and 10 cuts in each experimental unit. After 53 days of implantation the experiment, evaluated the survival(%, rooting(%, sprouting(%, formation of callus(%, number, length and biomass of roots formed. The interaction of the type of cuts with concentrations of auxin was not significant for any of the variables analyzed. The survival of cuttings was not influenced by the treatments. Cuts with two or four leaves presented rooting and length of roots above the cuttings without leaves. The application of auxin does not substitute the presence of leaf in cuts of ixora in vegetative propagation. The vegetative propagation by cut of ixora can be made without application of auxin, and the leaves must be maintained in the cuttings.

  7. Cutting method and cutting device for spent fuel rod of nuclear reactor

    International Nuclear Information System (INIS)

    Komatsu, Masahiko; Ose, Toshihiko.

    1996-01-01

    A control rod transferred under water in a vertically suspended state is postured horizontally at such a water depth that radiations can be shielded, and then it is cut to a dropping speed limiting portion and a cross-like main body. The separated cross-like main body portion is further cut in the longitudinal direction and separated into a pair of cut pieces each having an L-shaped cross section. A disk like metal saw is used as a cutting tool. Alternatively, a plasma jet cutter or a melting-type water jet cutter is used as a cutting tool. Then, since the spent control rod to be cut is postured horizontally under water, the water depth for the cutting position can be reduced. As a result, the cutting state using the cutting tool can be observed by naked eyes from the position above the water surface thereby enabling to perform the cutting operation reliably. (N.H.)

  8. Scientific and theoretical principles of personnel costs’ budgeting

    Directory of Open Access Journals (Sweden)

    O.P. Gutsal

    2015-06-01

    Full Text Available The object of this article is to determine the main purpose of company’s budgeting, to study its functions in terms of personnel management, to identify the main advantages and disadvantages of budgeting and to determine the stages of realization budgeting in the company. There have been considered the purpose and aim of budgeting. The main functions of budgeting, which include such ones as: planning, forecasting, information and analysis function, motivational, coordinative, control and involvement function have been identified (determined. In terms of defined functions of budgeting their essence in budgeting personnel costs has been outlined. The main advantages and disadvantages of budgeting have been found. There has been determined the implementing and realization company’s budgeting. The process of budgeting is realized according to the following consecutive stages: preparatory and analytical stage; definition of budget constraints; drafting up the budget; discussion and adjustment of budget indicators; adoption of budget; analysis and control of the budget. There also has been considered budget organization structure which includes budget committee, budget planning and analysis department, financial responsibility center.

  9. WFIRST: Coronagraph Systems Engineering and Performance Budgets

    Science.gov (United States)

    Poberezhskiy, Ilya; cady, eric; Frerking, Margaret A.; Kern, Brian; Nemati, Bijan; Noecker, Martin; Seo, Byoung-Joon; Zhao, Feng; Zhou, Hanying

    2018-01-01

    The WFIRST coronagraph instrument (CGI) will be the first in-space coronagraph using active wavefront control to directly image and characterize mature exoplanets and zodiacal disks in reflected starlight. For CGI systems engineering, including requirements development, CGI performance is predicted using a hierarchy of performance budgets to estimate various noise components — spatial and temporal flux variations — that obscure exoplanet signals in direct imaging and spectroscopy configurations. These performance budgets are validated through a robust integrated modeling and testbed model validation efforts.We present the performance budgeting framework used by WFIRST for the flow-down of coronagraph science requirements, mission constraints, and observatory interfaces to measurable instrument engineering parameters.

  10. Small business, cash budgets and general practice.

    Science.gov (United States)

    Jackson, A R

    1991-01-01

    In practice management, general practice falls into the category of small business with all its attendant generic problems. Disciplined planning and good financial management are not often seen in small business. These are required if general practitioners are to continue (or return to) the provision of high quality medical services. An effective budget process, especially cash-flow budgeting, is the key to successful planning and financial management. Budgeting will bring Control, Co-ordination, and Credibility to your practice. It will enable you to set goals and to achieve them.

  11. Loyalty Card Promotional Activity in Budget Hotel

    OpenAIRE

    Teng, Fei

    2010-01-01

    Loyalty card is one of the most commonly used promotional activities in business. Thus far, there are some research has been done on luxury hotel, but very few researches are on budget hotel. So, the purpose of the thesis is finding out the Swedish customers’ attitude and behavior towards budget hotel’s loyalty card; getting to know what factors influence Swedish customers’ response towards the loyalty card and budget hotels. In the thesis, the main research problem is “How do Swedish custome...

  12. Study on Earth Radiation Budget mission scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Dlhopolsky, R; Hollmann, R; Mueller, J; Stuhlmann, R [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Atmosphaerenphysik

    1998-12-31

    The goal of this study is to study optimized satellite configurations for observation of the radiation balance of the earth. We present a literature survey of earth radiation budget missions and instruments. We develop a parametric tool to simulate realistic multiple satellite mission scenarios. This tool is a modular computer program which models satellite orbits and scanning operation. We use Meteosat data sampled at three hour intervals as a database to simulate atmospheric scenes. Input variables are satellite equatorial crossing time and instrument characteristics. Regional, zonal and global monthly averages of shortwave and longwave fluxes for an ideal observing system and several realistic satellite scenarios are produced. Comparisons show that the three satellite combinations which have equatorial crossing times at midmorning, noon and midafternoon provide the best shortwave monitoring. Crossing times near sunrise and sunset should be avoided for the shortwave. Longwave diurnal models are necessary over and surfaces and cloudy regions, if there are only two measurements made during daylight hours. We have found in the shortwave inversion comparison that at least 15% of the monthly regional errors can be attributed to the shortwave anisotropic models used. (orig.) 68 refs.

  13. Study on Earth Radiation Budget mission scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Dlhopolsky, R.; Hollmann, R.; Mueller, J.; Stuhlmann, R. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Atmosphaerenphysik

    1997-12-31

    The goal of this study is to study optimized satellite configurations for observation of the radiation balance of the earth. We present a literature survey of earth radiation budget missions and instruments. We develop a parametric tool to simulate realistic multiple satellite mission scenarios. This tool is a modular computer program which models satellite orbits and scanning operation. We use Meteosat data sampled at three hour intervals as a database to simulate atmospheric scenes. Input variables are satellite equatorial crossing time and instrument characteristics. Regional, zonal and global monthly averages of shortwave and longwave fluxes for an ideal observing system and several realistic satellite scenarios are produced. Comparisons show that the three satellite combinations which have equatorial crossing times at midmorning, noon and midafternoon provide the best shortwave monitoring. Crossing times near sunrise and sunset should be avoided for the shortwave. Longwave diurnal models are necessary over and surfaces and cloudy regions, if there are only two measurements made during daylight hours. We have found in the shortwave inversion comparison that at least 15% of the monthly regional errors can be attributed to the shortwave anisotropic models used. (orig.) 68 refs.

  14. Chemical scissors cut phosphorene nanostructures

    International Nuclear Information System (INIS)

    Peng, Xihong; Wei, Qun

    2014-01-01

    Phosphorene, a recently fabricated two-dimensional puckered honeycomb structure of phosphorus, showed promising properties for applications in nano-electronics. In this work, we report a chemical scissors effect on phosphorene, using first-principles method. It was found that chemical species, such as H, OH, F, and Cl, can act as scissors to cut phosphorene. Phosphorus nanochains and nanoribbons can be obtained. The scissors effect results from the strong bonding between the chemical species and phosphorus atoms. Other species such as O, S and Se fail to cut phosphorene nanostructures due to their weak bonding with phosphorus. The electronic structures of the produced P-chains reveal that the hydrogenated chain is an insulator while the pristine chain is a one-dimensional Dirac material, in which the charge carriers are massless fermions travelling at an effective speed of light ∼8 × 10 5 m s −1 . The obtained zigzag phosphorene nanoribbons show either metallic or semiconducting behaviors, depending on the treatment of the edge phosphorus atoms. (paper)

  15. The center-cut solution.

    Science.gov (United States)

    Firnstahl, T W

    1993-01-01

    Timothy Firnstahl owns five successful restaurants in Seattle, but he recently came very close to owning none. In the early 1990s, he found himself, like so many restauranteurs, facing rising costs, inefficient management, and a recession. Confronting financial annihilation, Firnstahl had to act quickly: since he had no peripherals to trim, he cut off the head of his company. Remarkably, it worked. Firnstahl's problem was his new and innovative restaurant, Sharps Fresh Roasting. The heart of the Sharps concept was a unique long-roasting technique that made lean, inexpensive meats taste as juicy and delicious as fattier, expensive cuts. The process also lent itself to faster service and lower labor costs. But it wasn't working. Sharps wasn't breaking even, and his other restaurants couldn't make up the difference. He needed a solution fast. Firnstahl got his answer from Mikhail Gorbachev: slash the centralized command and liberate the company. In doing so, he would also transfer virtually all power and responsibility to his line managers. And after five months of intensive study and planning, he accomplished what he set out to do. He fired most of his corporate staff, empowered his restaurant managers with "100% Power and Responsibility," and, finally, undertook a massive promotion campaign. A year later, Sharps Fresh Roasting is the gold mine Firnstahl always believed it could be. He's done away with bureaucracy and turned business around in a down market. All this because his managers are managing themselves.

  16. Explaining the use of attribute cut-off values in decision making by means of involvement

    DEFF Research Database (Denmark)

    Peschel, Anne O.; Grebitus, Carola; Colson, Gregory

    2016-01-01

    evidence on consumers’ heterogeneous use of attribute cut-offs with a unique focus on the relationship with consumer involvement, a key component in consumer choice theory. Behavioral data from an online choice experiment on beef steak employing shelf simulations are combined with questions defining...... a latent class model identifies several key consumer segments (e.g., a price sensitive group) based on their choice behavior and reveals that the relationship between involvement, cut-off use and cut-off violations is not uniform across consumer segments....... respondents’ attribute cut-off values and their validated Personal Involvement Inventory (PII). Evidence from the analysis indicates that consumers who are highly involved are more likely to exhibit attribute cut-off values and are less likely to violate their cut-off values. Further investigation using...

  17. Problems and Specific Features of Sub-Federal Budgets Execution in 2015

    Directory of Open Access Journals (Sweden)

    Anna Ivanovna Povarova

    2016-09-01

    Full Text Available Last year has been marked by worrying trends in the development of a budgetary crisis in Russian regions; the crisis became apparent in 2013, when regional authorities had to get into huge debts in order to provide finances for the social obligations in the framework of the presidential decrees of May 7, 2012. The budget process in 2015 was characterized by expanding negative trends in those regions that had previously been the engines of economic growth and budget donors, which contradicts the regional development strategy. The crisis response measures consist in a large-scale optimization of expenses. Despite an attempt undertaken by the Government to replace commercial borrowings with budget loans, there are still no prospects for solving the debt issue. On the contrary, expert forecasts predict a doubling of the debt stock in regions by the end of 2017. Cuts in the expenditures on human capital development should be considered as a new negative trend, naturally resulting in the deterioration of material well-being of Russians, which was expressed in the decline in their real incomes and raising poverty level. It seems that on the eve of the RF State Duma elections the social policy of the authorities ceases to be socially oriented. Under the circumstances of an aggravating budget crisis, the Government is not increasing unrepayable financial aid (it did increase it in 2009; instead, it is pursuing the opposite policy and estranges itself from providing support to regions. Moreover, the Cabinet of Ministers does not openly wish to carry out a just division of powers and obligations of governmental units, but turns it into a mechanism for financing federal budget deficit by shifting state obligations onto the regions. The paper presents the results of the analysis of sub-federal budgets execution in 2015. The main goal was to identify the features of budget process and trends in the dynamics of budget parameters. The main conclusion is that

  18. Physics loses out in UK budget

    CERN Multimedia

    Cartlidge, E

    1998-01-01

    British astronomers are angry that the budget for the Particle Physics and Astronomy Research Council will receive only a 0.5% rise above inflation. All the other research councils will get increases of at least 3% (1 page).

  19. FY 2015 Supplement to the Presidents Budget

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The annual Supplement to the Presidents Budget for the NITRD Program provides a technical summary of the research activities planned and coordinated through NITRD in...

  20. FY 2016 Supplement to the Presidents Budget

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The annual Supplement to the Presidents Budget for the NITRD Program provides a technical summary of the research activities planned and coordinated through NITRD in...

  1. Radiation budget measurement/model interface

    Science.gov (United States)

    Vonderhaar, T. H.; Ciesielski, P.; Randel, D.; Stevens, D.

    1983-01-01

    This final report includes research results from the period February, 1981 through November, 1982. Two new results combine to form the final portion of this work. They are the work by Hanna (1982) and Stevens to successfully test and demonstrate a low-order spectral climate model and the work by Ciesielski et al. (1983) to combine and test the new radiation budget results from NIMBUS-7 with earlier satellite measurements. Together, the two related activities set the stage for future research on radiation budget measurement/model interfacing. Such combination of results will lead to new applications of satellite data to climate problems. The objectives of this research under the present contract are therefore satisfied. Additional research reported herein includes the compilation and documentation of the radiation budget data set a Colorado State University and the definition of climate-related experiments suggested after lengthy analysis of the satellite radiation budget experiments.

  2. Gender Responsive Community Based Planning and Budgeting ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... Responsive Community Based Planning and Budgeting Tool for Local Governance ... in data collection, and another module that facilitates gender responsive and ... In partnership with UNESCO's Organization for Women in Science for the ...

  3. FY 2014 Supplement to the Presidents Budget

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The annual Supplement to the Presidents Budget for the NITRD Program provides a technical summary of the research activities planned and coordinated through NITRD in...

  4. Budget Scoring: An Impediment to Alternative Financing

    National Research Council Canada - National Science Library

    Summers, Donald E; San Miguel, Joseph G

    2007-01-01

    .... One of the major impediments to using alternative forms of procurement financing for acquiring defense capabilities is in the budgetary treatment, or scoring, of these initiatives by the Congressional Budget Office (CBO...

  5. Zero-Based Budgeting in Nursing Education.

    Science.gov (United States)

    Farrell, Marie; Eckert, Joseph

    1979-01-01

    Zero-based budgeting (ZBB) refers to a system whereby the entire nursing program is reevaluated yearly and justification for all programs and expenditures must be made. ZBB is compared to the governmental sunset law. (JOW)

  6. Public Budget Database - Governmental receipts 1962-Current

    Data.gov (United States)

    Executive Office of the President — This file contains governmental receipts for 1962 through the current budget year, as well as four years of projections. It can be used to reproduce many of the...

  7. Budget Elements of Economic Security: Specifics of Classification

    Directory of Open Access Journals (Sweden)

    О. S.

    2017-02-01

    Full Text Available Theoretical aspects of economic security in conjunction with budget components such as “budget interests” and “budget necessities” are analyzed. Key positions of the categories “budget interests” and “budget necessities” in the theory of economic security in the budgetary area are substantiated given their priority role in setting up its implementation strategy. The category “budget interests” is defined as the system of budget necessities of the interest holders, implemented through budget activities of entities and aimed at seeking benefits through the budget, in order to guarantee functioning and development of the society, the state, legal entities and physical persons. “Budget necessities” are defined as the need in budget funds to achieve and sustain, at a certain level, life activities of individuals, social groups, society, state and legal entities. Classification of budget interests by various criteria is made in the context of their impact on the economic security of the state. It is demonstrated that the four-tier classification of the budget interests by interest holder is essential to guaranteeing economic security in the budgetary area: budget interests of the state: the interests held by central and local power offices; budget interests of legal entities: the interests of profit and non-profit (public, budgetary, party and other organizations; budget interests of individuals: basic necessities of individuals, met by budget transfers, which stand out of the array of public necessities by their individual character.

  8. A carbon budget for overfishing off Peru

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, J.J.

    1981-03-26

    The anchovy harvest off the coast of Peru has decreased from a maximum of about 12 million tons in 1970 to about 1 million tons/year between 1977 and 1979. This rise and collapse of the Peruvian anchovy fishery between the 1950s and the 1970s was accompanied by marked changes in the fluxes of a carbon budget for the upwelling ecosystem. These carbon budget changes are discussed in relation to anchovy production. (JMT)

  9. Budgeting, funding, and managing clinical research projects.

    Science.gov (United States)

    Hatfield, Elizabeth; Dicks, Elizabeth; Parfrey, Patrick

    2009-01-01

    Large, integrated multidisciplinary teams have become recognized as an efficient means by which to drive innovation and discovery in clinical research. This chapter describes how to budget and fund these large studies and effectively manage the large, often dispersed teams involved. Sources of funding are identified; budget development, justification, reporting, financial governance, and accountability are described; in addition to the creation and management of the multidisciplinary team that will implement the research plan.

  10. Negotiating Creativity on a Small Budget

    DEFF Research Database (Denmark)

    Andersen, Mads Møller

    2018-01-01

    for fiction series, the ambivalent cooperation behind this production exemplifies the low-budget efforts of a traditional public service institution to produce the fiction series that their younger target audience desires. The article uses a narrative-discursive approach to creativity and develops the term...... quite different assumptions about how production conditions can promote creativity, and suggests that a low-budget production can still be labelled as “successful”....

  11. Budget performance reporting and construction work packaging

    International Nuclear Information System (INIS)

    Strong, M.G.; Weyers, L.L.

    1976-01-01

    A changing financial, technological, and regulatory environment has increased the complexity, costliness, and risk involved in constructing new generating facilities. A primary challenge facing utility executives is to hold down costs on these construction projects. New construction management techniques are required to accomplish this. Commonwealth Edison has responded by implementing a new Budget Performance Reporting System and a Construction Work Packaging System. The new systems are being used successfully on four major construction projects with budgets totaling over $4 billion

  12. OPTIMIZING LOCAL BUDGET BALANCING IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Gyorgy Adina Crsitina

    2011-07-01

    Full Text Available The importance of the local public finance is growing in accordance with the increasing proportion of the decentralization process. The mechanism of resource allocation, and especially the allocation criteria used, constitutes subjects of debate. Our objective pursued is to assess whether the avoidance of the first step for balancing the allocation of funds can provide enhanced fairness in balancing the local budgets across the country. Local budgets in Romania receive significant resources from the state budget in the form of amounts and quotas distributed from certain taxes, which are revenues for the state budget. Some of these amounts are designed to balance the local budgets. The distribution of funds from the state budget to the local budgets requires two steps. Firstly, the amounts are divided by county, secondly, these amounts are directed within the county especially towards localities which have a lower financial standing. Given the significant disparities between counties, we believe that this mechanism does not ensure fairness in the allocation because the funds distributed according to the first step may not use fair criteria to meet the requirements for balanced local budgets. Therefore, we intend to simulate a balanced allocation of national funds for eliminating the first step that produces the most significant inequities. Direct application of the second step of allocation, with its two phases, will provide more funds serving those local administrative units for the income tax per capita is lower than the national average. Comparing the values allocated for the year 2011 with those obtained in the simulation we will examine changes that occur after the application of this method which seems to be more equitable and appropriate. This work was supported by CNCSISUEFISCSU, project number PNII-IDEI 1780/2008

  13. ANTESEN CUSTOMER LOYALTY PADA BUDGET HOTEL

    OpenAIRE

    Latifa Rahma

    2016-01-01

    This research discusses the effects of Service Quality on Customer Satisfaction, Customer Loyalty, and Brand Image Budget hotel (Five Budget Hotel Managed by local chain hotel). The purpose of this study were 1) to analyze the effects of Service Quality on Customer Satisfaction, 2) to analyze the effects of Service Quality on Customer Loyalty, 3) to analyze the effect of Customer Satisfaction to Customer Loyalty, 4) to analyze the effects of Service Quality on the Brand Image, 5 ) to analyze ...

  14. Budget Analysis: Review of the Governor's Proposed Budget, 1999-00.

    Science.gov (United States)

    New York State Office of the Comptroller, Albany.

    This report provides an overview of the 1999-2000 executive budget for New York State. The budget calls for $72.7 billion in all funds spending and proposes that a $1.8 billion surplus from the 1998-99 fiscal year be used to fill budget gaps in fiscal years 2000-01 and 2001-02. The report focuses on spending for education, health and social…

  15. Zero-based budgeting: Pathway to sustainable budget implementation in Nigeria

    OpenAIRE

    Udeh Francis Nnoli; Sopekan Sam Adeyemi; Oraka Azubuike Onuora

    2017-01-01

    This paper investigates the application of Zero-Based Budgeting (ZBB) system to budget implementation by the Federal Government of Nigeria by ascertaining among others, the relationship between ZBB approach and budget performance indices in Nigeria. To achieve the above, primary data were obtained through questionnaires that were specifically designed for this study. The data obtained were analysed with the SPSS version 21. The statistical tools employed were Analysis of Variance (ANOVA) and ...

  16. Establishing trees on cut-over peatlands in eastern Canada

    Directory of Open Access Journals (Sweden)

    J. Bussières

    2008-12-01

    Full Text Available Four major tree-planting trials on cut-over peatlands in eastern Canada were surveyed in 2002, in order to evaluate the potential use of trees in rehabilitation following horticultural peat extraction. At one of the sites, an experiment to determine the appropriate fertilisation rate for trees planted on cut-over peatlands was also conducted over several years. Tree performance was assessed by measuring survival, total height and annual growth of red maple (Acer rubrum L., tamarack (Larix laricina (Du Roi Koch., black spruce (Picea mariana (Mill. B.S.P., jack pine (Pinus banksiana Lamb. and hybrid poplar (Populus spp.. Establishment and growth of tamarack and black spruce in cut-over peatlands showed good potential when compared to performance in conventional forestry plantations. Red maple and jack pine gave poor productivity but promising survival, whilst hybrid poplar plantings failed. Adding nutrients was essential for growth but dosages above 122.5 g of 3.4N-8.3P-24.2K per tree gave no further improvement. Therefore, several different tree species can be planted to reclaim cut-over peatlands in eastern Canada, so long as the appropriate species are chosen and nutrients are provided.

  17. Research on budget management under IT environment

    Directory of Open Access Journals (Sweden)

    Wenchang Li

    2017-03-01

    Full Text Available IT technology has become a key element of core competitiveness of enterprises, and also the basis for its daily operation. The budget is a management process of forecasting and planning of the future operation and financial activities under the guidance of the strategic objectives, and completion of the strategic objectives to a maximum extent. Whether both of them can be effectively combined with is the key to effective implementation of the budget. Through analysis of the existing problems of the traditional budget of the enterprise and the budget under the information technology environment, analysis of the internal and external influencing factors of the budget management of the large and medium sized enterprises under the current environment with SWOT, factor quantization and weight with AHP, development of the strategic program according to the priority of weight, and finally verification with a case, this paper concludes that, the budget management work can be more strategic and forward-looking through combination with AHP and SWOT analysis.

  18. Zero-based budgeting: Pathway to sustainable budget implementation in Nigeria

    Directory of Open Access Journals (Sweden)

    Udeh Francis Nnoli

    2017-10-01

    Full Text Available This paper investigates the application of Zero-Based Budgeting (ZBB system to budget implementation by the Federal Government of Nigeria by ascertaining among others, the relationship between ZBB approach and budget performance indices in Nigeria. To achieve the above, primary data were obtained through questionnaires that were specifically designed for this study. The data obtained were analysed with the SPSS version 21. The statistical tools employed were Analysis of Variance (ANOVA and Pearson Correlation Coefficiant (PCC. The Cronbach’s Alpha reliability test was used to test the internal consistency/reliability of the instrument used for the study. On the basis of the analysis, we found that there is significant difference in the effectiveness of ZBB in terms of budget implementation compared to the Traditional Budgeting System (TBS. It was also found that the application of ZBB tend to be performance-driven and is able to detect the redundant programmes/projects and staff, thereby recommending either realignment, discharge, transfer or redeployment of projects or resources. The study therefore, recommends among others that ZBB should be encouraged as a good means of budget implementation and also close monitoring of budget execution should be enshrined in work ethics at every stage of budget preparation and implementation in the country. This is believed would go a long way to strengthen measures aimed at mitigating poor budget implementation in the country.

  19. Low-budget advertising campaigns: CONCEPT AND TECHNOLOGY

    OpenAIRE

    Makarova, E. O.; Ababiy, Nataliya Sergeevna; Макарова, Е. О.; Абабий, Наталья Сергеевна

    2013-01-01

    In the world we just need to do the concept of advertising and advertising strategy correctly, in other words, to plain the marketing campaign. Well-planned advertising campaign is not always expensive. The analog of the big-budget advertising campaign is a low-budget. There are several types of effective low-budget campaign. They will be described in this article. В современном мире нужно грамотно выстраивать концепцию рекламы и рекламную стратегию, другими словами грамотно подходить к пл...

  20. A little off the top. While overall healthcare hiring is up, some health systems are being forced to cut jobs, workers and find other savings.

    Science.gov (United States)

    Evans, Melanie

    2008-06-02

    Despite the oft-repeated theory that the healthcare industry is "recession-proof," some systems have found themselves resorting to layoffs and budget cuts during the current economic downturn. Lee Memorial Health System CFO John Wiest, left, said that the system is dealing with reduced operating income and net volume, and it has trimmed 415 jobs through attrition.

  1. New Modelling Strategies For Metal Cutting

    International Nuclear Information System (INIS)

    Rosa, Pedro A. R.; Martins, Paulo A. F.; Atkins, Anthony G.

    2007-01-01

    This paper draws from the 'plasticity and friction only' view of metal cutting to the presentation of new modelling strategies based on the interaction between finite elements and modern ductile fracture mechanics. The overall presentation is supported by specially designed orthogonal metal cutting experiments that were performed on Lead test specimens under laboratory-controlled conditions. Comparisons between theoretical predictions and experimental results comprise a wide range of topics such as material flow, cutting forces and specific cutting pressure. The paper demonstrates that while material flow and chip formation can be successfully modelled by traditional 'plasticity and friction only' analyses, the contribution of the fracture work involved in the formation of new surfaces is essential for obtaining good estimates of cutting forces and of the specific cutting pressure

  2. Laser cutting of sheets for Tailored Blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    sound welds. Laser cutting the sheets may therefore be an alternative to shear cutting, if the cut kerf squareness can be kept below 0.05 mm.In a number of systematic laboratory experiments the effects of the major process parameters in laser cutting have been investigated. Each cut was quantified...... by the squareness, the surface roughness and the burr height. Mild steel as well as high strength steel with and with out galvanisation with thickness' of 0.7(5) and 1.25 were used.In the tests the difference in cut quality between a 5" and a 7.5" focusing lens were tested and the effect of using pulsed mode laser...

  3. Method of dismantling cylindrical structure by cutting

    International Nuclear Information System (INIS)

    Harada, Minoru; Mitsuo, Kohei; Yokota, Isoya; Nakamura, Kenjiro.

    1989-01-01

    This invention concerns a method of cutting and removing cylindrical structures, for example, iron-reinforced concrete materials such as thermal shielding walls in BWR type power plants into block-like form. That is, in a method of cutting and removing the cylindrical structure from the side of the outer wall, the structural material is cut from above to below successively in the axial direction and the circumferential direction by means abrasive jet by remote operation and cut into blocks each of a predetermined size. The cut out blocks are successively taken out. Cutting of the material from above to below by remote operation and taking out of small blocks causes no hazards to human body. Upon practicing the present invention, it is preferred to use a processing device for slurry and exhaust gases for preventing scattering of activated dismantled pieces or powdery dusts. (K.M.)

  4. Submerged cutting characteristics of abrasive suspension jet

    International Nuclear Information System (INIS)

    Shimizu, Seiji; Peng, Guoyi; Oguma, Yasuyuki; Nishikata, Hiroki

    2015-01-01

    An abrasive suspension jet (ASJ) formed by propelling abrasive suspension through a nozzle has a greater cutting capability than the conventional abrasive water jet. However the cutting capability of submerged ASJs decreases drastically with increasing the standoff distance and the pressure around the jet. A sheathed nozzle nozzle with ventilation for ASJs has been developed as a mean of extending the effective stand-off distance and improving the cutting capabilities under submerged condition. In the present investigation, cutting tests by ASJs in air and under submerged condition are conducted with specimens of aluminum alloy. Air coated ASJs are formed by using a sheathed nozzle with ventilation. The relative cutting depth is defined as the cutting depth is arranged effectually by the cavitation number based on the cavity pressure measured at the sheath. (author)

  5. Craterlike structures on the laser cut surface

    Science.gov (United States)

    Shulyatyev, V. B.; Orishich, A. M.

    2017-10-01

    Analysis of the laser cut surface morphology remain topical. It is related with the fact that the surface roughness is the main index of the cut quality. The present paper deals with the experimental study of the relatively unstudied type of defects on the laser cut surface, dimples, or craters. According to the measurement results, amount of craters per unit of the laser cut surface area rises as the sheet thickness rises. The crater diameter rises together with the sheet thickness and distance from the upper sheet edge. The obtained data permit concluding that the defects like craters are observed predominantly in the case of thick sheets. The results agree with the hypothesis of crater formation as impact structures resulting from the melt drops getting on the cut channel walls upon separation from the cut front by the gas flow.

  6. A Methodological Review of US Budget-Impact Models for New Drugs.

    Science.gov (United States)

    Mauskopf, Josephine; Earnshaw, Stephanie

    2016-11-01

    A budget-impact analysis is required by many jurisdictions when adding a new drug to the formulary. However, previous reviews have indicated that adherence to methodological guidelines is variable. In this methodological review, we assess the extent to which US budget-impact analyses for new drugs use recommended practices. We describe recommended practice for seven key elements in the design of a budget-impact analysis. Targeted literature searches for US studies reporting estimates of the budget impact of a new drug were performed and we prepared a summary of how each study addressed the seven key elements. The primary finding from this review is that recommended practice is not followed in many budget-impact analyses. For example, we found that growth in the treated population size and/or changes in disease-related costs expected during the model time horizon for more effective treatments was not included in several analyses for chronic conditions. In addition, all drug-related costs were not captured in the majority of the models. Finally, for most studies, one-way sensitivity and scenario analyses were very limited, and the ranges used in one-way sensitivity analyses were frequently arbitrary percentages rather than being data driven. The conclusions from our review are that changes in population size, disease severity mix, and/or disease-related costs should be properly accounted for to avoid over- or underestimating the budget impact. Since each budget holder might have different perspectives and different values for many of the input parameters, it is also critical for published budget-impact analyses to include extensive sensitivity and scenario analyses based on realistic input values.

  7. Ceramic cutting tools materials, development and performance

    CERN Document Server

    Whitney, E Dow

    1994-01-01

    Interest in ceramics as a high speed cutting tool material is based primarily on favorable material properties. As a class of materials, ceramics possess high melting points, excellent hardness and good wear resistance. Unlike most metals, hardness levels in ceramics generally remain high at elevated temperatures which means that cutting tip integrity is relatively unaffected at high cutting speeds. Ceramics are also chemically inert against most workmetals.

  8. CAD for cutting head exchange of roadheader

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Z.; Wu, Z.; Qian, P. [China Coal Research Institute (China). Shanghai Branch

    1999-08-01

    Improving the cutting method according to the actual operating conditions is an effective way to raise production efficiency. A cutting head designed by means of computer and CAD software is characterized by short design cycle but high design quality. Taking the AM-50 road header as an example, this paper shows that it is feasible to design an interchangeable cutting head for the machine without interfering with the main technical parameters. 2 refs., 5 figs., 1 tab.

  9. Comparison of two cut-to-length harvesting systems operating in eastern hardwoods

    Science.gov (United States)

    Chris B. LeDoux; Niel K. Huyler

    2001-01-01

    We compared production rates, operating costs, and break-even points (BEP) for small and large cut-to-length (CTL) harvesting systems operating at several machine utilization rates (MUR) in mixed hardwood and softwood stands in Vermont.

  10. A Capsule Look at Zero-Base Budgeting.

    Science.gov (United States)

    Griffin, William A., Jr.

    Weaknesses of the traditional incremental budgeting approach are considered as background to indicate the need for a new system of budgeting in educational institutions, and a step-by-step description of zero-based budgeting (ZBB) is presented. Proposed advantages of ZBB include the following: better staff morale due to a budget that is open and…

  11. 40 CFR 96.140 - State trading budgets.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false State trading budgets. 96.140 Section...) NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS FOR STATE IMPLEMENTATION PLANS CAIR NOX Allowance Allocations § 96.140 State trading budgets. The State trading budgets for annual...

  12. 40 CFR 97.140 - State trading budgets.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false State trading budgets. 97.140 Section...) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS CAIR NOX Allowance Allocations § 97.140 State trading budgets. The State trading budgets for annual allocations of CAIR NOX allowances...

  13. Budget Update, November 9, 2010. Report 10-20

    Science.gov (United States)

    Woolfork, Kevin

    2010-01-01

    On October 8, Governor Arnold Schwarzenegger signed the 2010-11 Budget Act for the State of California. This budget was the outcome of many months of negotiation between the Governor and the Legislature. The Governor vetoed $963 million in spending from the Legislature's budget, arriving at a budget that addresses an estimated $19.1 billion…

  14. Defense.gov Special Report: 2015 Fiscal Budget

    Science.gov (United States)

    Department of Defense Submit Search FY 2015 Fiscal Budget News Stories Dempsey Calls for Budget Increase increase its budget, the chairman of the Joint Chiefs of Staff said. Story James: Air Force Grapples with Congress to Fund Readiness The Air Force fiscal 2015 budget request is shrinking because of Congressional

  15. Defense.gov Special Report: 2013 Fiscal Budget

    Science.gov (United States)

    Department of Defense Submit Search 2013 Fiscal Budget Published Feb. 13, 2012 Top Stories Budget Proposal Slows Cost Growth, Pentagon Leaders Say The Defense Department's proposed fiscal 2013 budget request Department officials told a Senate panel. Story Officials Seek Construction Funds, More BRAC in Budget

  16. Budget of the U.S. Government, Fiscal Year 2017

    Science.gov (United States)

    Office of Management and Budget, Executive Office of the President, 2016

    2016-01-01

    "Budget of the United States Government, Fiscal Year 2017" contains the Budget Message of the President, information on the President's priorities, and summary tables. President Obama's 2017 Budget makes critical investments while adhering to the bipartisan budget agreement he signed into the previous fall, and it lifts sequestration in…

  17. 40 CFR 96.40 - State trading program budget.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false State trading program budget. 96.40... (CONTINUED) NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS FOR STATE IMPLEMENTATION PLANS NOX Allowance Allocations § 96.40 State trading program budget. The State trading program budget...

  18. The Relevance of Budget Preparation in School Administration | Fan ...

    African Journals Online (AJOL)

    It demands a periodic preparation of the school budget. This paper therefore examines the concept of budgeting, its advantages in our school system and suggests some accounting requirements which are aimed at making the preparation of a budget less cumbersome and more realistic. It highlights four types of budgets: ...

  19. 34 CFR 75.251 - The budget period.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false The budget period. 75.251 Section 75.251 Education... Multi-Year Projects § 75.251 The budget period. (a) The Secretary usually approves a budget period of... budget period; and (2) Indicates his or her intention to make contination awards to fund the remainder of...

  20. 14 CFR 152.323 - Budget revision: Airport development.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Budget revision: Airport development. 152... TRANSPORTATION (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Accounting and Reporting Requirements § 152.323 Budget... change in the budget estimates, the sponsor shall submit a request for budget revision on a form...