WorldWideScience

Sample records for set materials exposed

  1. Setting science free from materialism.

    Science.gov (United States)

    Sheldrake, Rupert

    2013-01-01

    Contemporary science is based on the claim that all reality is material or physical. There is no reality but material reality. Consciousness is a by-product of the physical activity of the brain. Matter is unconscious. Evolution is purposeless. This view is now undergoing a credibility crunch. The biggest problem of all for materialism is the existence of consciousness. Panpsychism provides a way forward. So does the recognition that minds are not confined to brains. Copyright © 2013 Elsevier Inc. All rights reserved.

  2. Computed temperature profile in materials exposed to gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Ping, Tso Chin; Choong, Yap Siew; Seon, Chan Kam

    1987-06-01

    Computed temperature profiles are presented for the materials of lead, steel, concrete and water in curved shells, when they are exposed to gamma radiation. The results are based on the usual simplified theory of thermal conduction with an exponential heat source.

  3. Durability of Selected Membrane Materials when Exposed to Chlorine Gas

    Energy Technology Data Exchange (ETDEWEB)

    Eikeland, Marianne Soerflaten

    2001-03-01

    This thesis is focusing on the durability of selected membrane materials when exposed to chlorine gas in the temperature range 30-100{sup o}C. Studies of the changes of membrane separation properties and the mechanisms promoting these changes have been studied. The selected membrane materials were poly(dimethylsioxane) (PDMS), Fluorel, fluorosilicone, and blends of PDMS and Fluorel. The thesis is organised in seven chapters. The first chapter gives an introduction to the background of the work. The second chapter presents the theory for gas separation using dense rubbery membranes. The properties of the selected membrane materials are presented in chapter three. The fourth chapter describes degradation mechanisms for polymeric materials in general and for the selected membrane materials in particular. Presentation of the experimental work is given in chapter five, while the results with discussions are presented in chapter six. The conclusions and recommendations for further studies are given in chapter seven. Five appendixes are attached: Appendix A describes the calculations of permeability and solubility coefficients and the accuracy of the experimental measurements. Appendix B summarises the measured values in tables and Appendix C describes the analytical methods. Appendix D gives the properties of the gases used in the experiments. Appendix E is the article ''Durability of Poly(dimethylsiloxane) when Exposed to Chlorine Gas'', submitted to the Journal of Applied Polymer Science. Highly crosslinked PDMS was found to have an initial high permeability for chlorine gas and a high Cl{sub 2}/O{sub 2} selectivity. However when exposed to chlorine gas the permeability decreased significantly. Crosslinking of the PDMS polymer chain and chlorination of the polymer gave a denser polymer structure and thus lower permeability. Fluorel showed very low permeabilities and selectivities for the gases in question and was thus not interesting for this

  4. Encyclopedia of Smart Materials, 2 Volume Set

    Science.gov (United States)

    Schwartz, Mel

    2002-03-01

    Smart materials--materials and structures that can impart information about their environment to an observer or monitoring device--are revolutionizing fields as diverse as engineering, optics, and medical technology. Advances in smart materials are impacting disciplines across the scientific and technological landscape. Now, practictioners and researchers have an authoritative source to go to for answers about this emerging new area. Encyclopedia of Smart Materials provides A-to-Z coverage of the entire field of intelligent materials. Discussions of theory, fabrication, processing, applications, and uses of these unique materials are presented here in a collection of concise entries from the world's foremost experts in the field--including scientists, educators and engineers. This encyclopedia is as broad in scope as the technology itself, addressing daily, commercial applications as well as sophisticated units designed to operate in space, underwater, underground, and within the human body. Extensively cross-referenced and generously supplemented with bibliographies and indexes, this book's treatment also broaches the specialized properties and coatings that are required for the use of materials in extreme conditions. Illustrated with photographs, tables, line drawings, and equations, Encyclopedia of Smart Materials is the premier reference for material scientists, chemists, chemical engineers, process engineers, consultants, patent attorneys and students in these areas. An essential resource on the shelves of laboratories, government facilities, and academic libraries. Editor-in-Chief, Mel Schwartz has over forty years of experience with metals, ceramics, and composites, with special expertise in brazing. The holder of five patents, he has authored thirteen books and more than one hundred technical papers and articles. Reach the information you need rapidly and easily with the ONLINE edition of the Encyclopedia of Smart Materials. The online edition delivers all

  5. Density of loose-fill insulation material exposed to cyclic humidity conditions

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    the granulated loose-fill material is exposed to a climate that is characterised as cyclic humidity conditions (a constant temperature and a relative humidity alternating between two predetermined constant relative humidity levels). A better understanding of the behaviour of granulated loose-fill material...

  6. Study of behavior of concrete and cement based composite materials exposed to high temperatures

    OpenAIRE

    Bodnárová, L.; Horák, D.; Válek, J.; Hela, R.; Sitek, L. (Libor)

    2013-01-01

    The paper describes possibilities of observation of behaviour of concrete and cement based composite material exposed to high temperatures. Nowadays, for large-scale tests of behaviour of concrete exposed to high temperatures, testing devices of certified fire testing stations in the Czech Republic and surrounding states are used. These tests are quite expensive. For experimental verification of smaller test specimens, a testing device was built at the Technical University in Brno, wher...

  7. Sociodemographic characteristics of pregnant women exposed to domestic violence during pregnancy in an Iranian setting.

    Science.gov (United States)

    Hajikhani Golchin, Nayereh Azam; Hamzehgardeshi, Zeinab; Hamzehgardeshi, Leila; Shirzad Ahoodashti, Mahboobeh

    2014-04-01

    Domestic violence refers to any type of physical, sexual, and psychological abuse enforced in the setting of familial relationships. Domestic violence has a significant relationship with poor outcome among pregnant women. Success in resolving this social phenomenon rests on accurate assessment of the society and the factors associated with violence in that specific community. The present study was conducted to assess the demographic characteristics of pregnant women exposed to different types of domestic violence during pregnancy in Iranian setting. This is a descriptive-analytic, cross-sectional study. Sampling was done with convenience sampling method. in the current study, 301 pregnant women aged 15-45 years of Iranian nationality who were referred to the hospital for delivery or abortion, regardless of the gestational age, were selected as the subjects. Data collection tools consisted of a sociodemographic questionnaire and a violence checklist. Violence was assessed using Revised Conflict Tactics Scale (CTS2). Data were analyzed using descriptive and analytic statistics on SPSS version 16 (SPSS, Chicago, IL, USA) and STATA version 10. The characteristics of the participants were presented as mean ± SD or number and percentage. Differences between variables were determined by the χ2 test, and multivariate logistic regression. P patriarchal household (AOR = 16.75). As domestic violence is greatly influenced by the customs and cultures of each community, no single strategy can be adopted to resolve it universally. Simultaneously, it is necessary to adopt comprehensive measures to control factors associated with domestic violence in the healthcare, judiciary, and the educational systems in order to prevent and curb this social challenge.

  8. Analyzing large data sets acquired through telemetry from rats exposed to organophosphorous compounds: an EEG study.

    Science.gov (United States)

    de Araujo Furtado, Marcio; Zheng, Andy; Sedigh-Sarvestani, Madineh; Lumley, Lucille; Lichtenstein, Spencer; Yourick, Debra

    2009-10-30

    The organophosphorous compound soman is an acetylcholinesterase inhibitor that causes damage to the brain. Exposure to soman causes neuropathology as a result of prolonged and recurrent seizures. In the present study, long-term recordings of cortical EEG were used to develop an unbiased means to quantify measures of seizure activity in a large data set while excluding other signal types. Rats were implanted with telemetry transmitters and exposed to soman followed by treatment with therapeutics similar to those administered in the field after nerve agent exposure. EEG, activity and temperature were recorded continuously for a minimum of 2 days pre-exposure and 15 days post-exposure. A set of automatic MATLAB algorithms have been developed to remove artifacts and measure the characteristics of long-term EEG recordings. The algorithms use short-time Fourier transforms to compute the power spectrum of the signal for 2-s intervals. The spectrum is then divided into the delta, theta, alpha, and beta frequency bands. A linear fit to the power spectrum is used to distinguish normal EEG activity from artifacts and high amplitude spike wave activity. Changes in time spent in seizure over a prolonged period are a powerful indicator of the effects of novel therapeutics against seizures. A graphical user interface has been created that simultaneously plots the raw EEG in the time domain, the power spectrum, and the wavelet transform. Motor activity and temperature are associated with EEG changes. The accuracy of this algorithm is also verified against visual inspection of video recordings up to 3 days after exposure.

  9. Composite Materials With Uncured Epoxy Matrix Exposed in Stratosphere During NASA Stratospheric Balloon Flight

    Science.gov (United States)

    Kondyurin, Alexey; Kondyurina, Irina; Bilek, Marcela; de Groh, Kim K.

    2013-01-01

    A cassette of uncured composite materials with epoxy resin matrixes was exposed in the stratosphere (40 km altitude) over three days. Temperature variations of -76 to 32.5C and pressure up to 2.1 torr were recorded during flight. An analysis of the chemical structure of the composites showed, that the polymer matrix exposed in the stratosphere becomes crosslinked, while the ground control materials react by way of polymerization reaction of epoxy groups. The space irradiations are considered to be responsible for crosslinking of the uncured polymers exposed in the stratosphere. The composites were cured on Earth after landing. Analysis of the cured composites showed that the polymer matrix remains active under stratospheric conditions. The results can be used for predicting curing processes of polymer composites in a free space environment during an orbital space flight.

  10. Toxicity and oxidative stress induced by chromium in workers exposed from different occupational settings around the globe: A review.

    Science.gov (United States)

    Junaid, Muhammad; Hashmi, Muhammad Zaffar; Malik, Riffat Naseem; Pei, De-Sheng

    2016-10-01

    The present review focused on the levels and toxicological status of heavy metals especially chromium (Cr) in the exposed workers from different occupational settings around the globe and in Pakistan. It was found that exposed workers from leather tanning and metal plating units showed elevated levels of Cr than the workers from other occupational settings. Cr and other heavy metals level in biological matrices of the exposed workers in different occupational settings revealed that developing countries are severely contaminated. Occupational settings from the Sialkot district, Pakistan exhibited elevated level of Cr in biological entities of the exposed workers. Review suggested that higher level of Cr exposure to the workers enhance the oxidative stress (reactive oxygen species (ROS) and hydroxyl (OH) radical generation) which may cause; cellular and molecular damage such as genotoxicity and chromosomal aberration formations, and carcinogenic effects. This review will help to understand the Cr contamination mechanisms and associated health implications in different occupational settings around the globe in general and particularly to Pakistan. This study will also assist occupational health and safety management authorities to devise or change the Cr recommended exposure limits (REL) for different occupational settings.

  11. Sociodemographic Characteristics of Pregnant Women Exposed to Domestic Violence During Pregnancy in an Iranian Setting

    Science.gov (United States)

    Hajikhani Golchin, Nayereh Azam; Hamzehgardeshi, Zeinab; Hamzehgardeshi, Leila; Shirzad Ahoodashti, Mahboobeh

    2014-01-01

    Background: Domestic violence refers to any type of physical, sexual, and psychological abuse enforced in the setting of familial relationships. Domestic violence has a significant relationship with poor outcome among pregnant women. Success in resolving this social phenomenon rests on accurate assessment of the society and the factors associated with violence in that specific community. Objectives: The present study was conducted to assess the demographic characteristics of pregnant women exposed to different types of domestic violence during pregnancy in Iranian setting. Patients and Methods: This is a descriptive-analytic, cross-sectional study. Sampling was done with convenience sampling method. in the current study, 301 pregnant women aged 15-45 years of Iranian nationality who were referred to the hospital for delivery or abortion, regardless of the gestational age, were selected as the subjects. Data collection tools consisted of a sociodemographic questionnaire and a violence checklist. Violence was assessed using Revised Conflict Tactics Scale (CTS2). Data were analyzed using descriptive and analytic statistics on SPSS version 16 (SPSS, Chicago, IL, USA) and STATA version 10. The characteristics of the participants were presented as mean ± SD or number and percentage. Differences between variables were determined by the χ2 test, and multivariate logistic regression. P < 0.05 was considered significant. Results: According to the findings, 34.56% of participants had experienced psychological violence, 28.24% physical violence, and 3.65% sexual violence. Multivariate logistic regression revealed a statistically significant relationship only in the case of physical violence and history of penal conviction for partner (Adjusted Odds Ratio (AOR) = 12.60) and a patriarchal household (AOR = 16.75). Conclusions: As domestic violence is greatly influenced by the customs and cultures of each community, no single strategy can be adopted to resolve it universally

  12. Lower life satisfaction related to materialism in children frequently exposed to advertising.

    Science.gov (United States)

    Opree, Suzanna J; Buijzen, Moniek; Valkenburg, Patti M

    2012-09-01

    Research among adults suggests that materialism and life satisfaction negatively influence each other, causing a downward spiral. So far, cross-sectional research among children has indicated that materialistic children are less happy, but causality remains uncertain. This study adds to the literature by investigating the longitudinal relation between materialism and life satisfaction. We also investigated whether their relation depended on children's level of exposure to advertising. A sample of 466 children (aged 8-11; 55% girls) participated in a 2-wave online survey with a 1-year interval. We asked children questions about material possessions, life satisfaction, and advertising. We used structural equation modeling to study the relationship between these variables. For the children in our sample, no effect of materialism on life satisfaction was observed. However, life satisfaction did have a negative effect on materialism. Exposure to advertising facilitated this effect: We only found an effect of life satisfaction on materialism for children who were frequently exposed to advertising. Among 8- to 11-year-old children, life satisfaction leads to decreased materialism and not the other way around. However, this effect only holds for children who are frequently exposed to television advertising. It is plausible that the material values portrayed in advertising teach children that material possessions are a way to cope with decreased life satisfaction. It is important to reduce this effect, because findings among adults suggest that materialistic children may become less happy later in life. Various intervention strategies are discussed.

  13. [Clinical treatment adherence of health care workers and students exposed to potentially infectious biological material].

    Science.gov (United States)

    Almeida, Maria Cristina Mendes de; Canini, Silvia Rita Marin da Silva; Reis, Renata Karina; Toffano, Silmara Elaine Malaguti; Pereira, Fernanda Maria Vieira; Gir, Elucir

    2015-04-01

    To assess adherence to clinical appointments by health care workers (HCW) and students who suffered accidents with potentially infectious biological material. A retrospective cross-sectional study that assessed clinical records of accidents involving biological material between 2005 and 2010 in a specialized unit. A total of 461 individuals exposed to biological material were treated, of which 389 (84.4%) were HCWs and 72 (15.6%) students. Of the 461 exposed individuals, 307 (66.6%) attended a follow-up appointment. Individuals who had suffered an accident with a known source patient were 29 times more likely to show up to their scheduled follow-up appointments (OR: 29.98; CI95%: 16.09-55.83). The predictor in both univariate and multivariate analyses for adherence to clinical follow-up appointment was having a known source patient with nonreactive serology for the human immunodeficiency virus and/or hepatitis B and C.

  14. Experimental characterization of meteoric material exposed to a high enthalpy flow in the Plasmatron

    Science.gov (United States)

    Zavalan, Luiza; Bariselli, Federico; Barros Dias, Bruno; Helber, Bernd; Magin, Thierry

    2017-04-01

    Meteoroids, disintegrated during their entry in the atmosphere, contribute massively to the input of cosmic metals to Earth. Yet, this phenomenon is not well understood. Experimental studies on meteor material degradation in high enthalpy facilities are scarce and often do not provide quantitative data which are necessary for the validation of the simulation tools. In this work, we tried to duplicate typical meteor flight conditions in a ground testing facility to analyze the thermo-chemical degradation mechanisms by reproducing the stagnation point region conditions. The VKI Plasmatron is one of the most powerful induction-coupled plasma wind-tunnels in the world. It represents an important tool for the characterization of ceramic and ablative materials employed in the fabrication of Thermal Protection Systems (TPS) of spacecraft. The testing methodology and measurement techniques used for TPS characterization were adapted for the investigation of evaporation and melting in samples of basalt (meteorite surrogate) and ordinary chondrite. The materials were exposed to stagnation point heat fluxes of 1 MW/m2 and 3 MW/m2. During the test, numerous local pockets were formed at the surface of the samples by the emergence of gas bubbles. Images recorded through a digital 14bit CCD camera system clearly revealed the frothing of the surface for both tested materials. This process appeared to be more heterogeneous for the basaltic samples than for the ordinary chondritic material. Surface temperature measurements obtained via a two-color pyrometer showed a maximum surface temperature in the range between 2160 and 2490 Kelvins. Some of the basaltic samples fractured during the tests. This is probably due to the strong thermal gradients experienced by the material in these harsh conditions. Therefore, the surface temperature measurements suffered sudden drops in correspondence with the fracturing time. Emission spectra of air and ablated species were collected with resolution

  15. OLTARIS: An Efficient Web-Based Tool for Analyzing Materials Exposed to Space Radiation

    Science.gov (United States)

    Slaba, Tony; McMullen, Amelia M.; Thibeault, Sheila A.; Sandridge, Chris A.; Clowdsley, Martha S.; Blatting, Steve R.

    2011-01-01

    The near-Earth space radiation environment includes energetic galactic cosmic rays (GCR), high intensity proton and electron belts, and the potential for solar particle events (SPE). These sources may penetrate shielding materials and deposit significant energy in sensitive electronic devices on board spacecraft and satellites. Material and design optimization methods may be used to reduce the exposure and extend the operational lifetime of individual components and systems. Since laboratory experiments are expensive and may not cover the range of particles and energies relevant for space applications, such optimization may be done computationally with efficient algorithms that include the various constraints placed on the component, system, or mission. In the present work, the web-based tool OLTARIS (On-Line Tool for the Assessment of Radiation in Space) is presented, and the applicability of the tool for rapidly analyzing exposure levels within either complicated shielding geometries or user-defined material slabs exposed to space radiation is demonstrated. An example approach for material optimization is also presented. Slabs of various advanced multifunctional materials are defined and exposed to several space radiation environments. The materials and thicknesses defining each layer in the slab are then systematically adjusted to arrive at an optimal slab configuration.

  16. The viscoelastic characterization of polymer materials exposed to the low-Earth orbit environment

    International Nuclear Information System (INIS)

    Strganac, T.; Letton, A.

    1992-01-01

    Recent accomplishments in our research efforts have included the successful measurement of the thermal mechanical properties of polymer materials exposed to the low-earth orbit environment. In particular, viscoelastic properties were recorded using the Rheometrics Solids Analyzer (RSA 2). Dynamic moduli (E', the storage component of the elastic modulus, and E'', the loss component of the elastic modulus) were recorded over three decades of frequency (0.1 to 100 rad/sec) for temperatures ranging from -150 to 150 C. Although this temperature range extends beyond the typical use range of the materials, measurements in this region are necessary in the development of complete viscoelastic constitutive models. The experimental results were used to provide the stress relaxation and creep compliance performance characteristics through viscoelastic correspondence principles. Our results quantify the differences between exposed and control polymer specimens. The characterization is specifically designed to elucidate a constitutive model that accurately predicts the change in behavior of these materials due to exposure. The constitutive model for viscoelastic behavior reflects the level of strain, the rate of strain, and the history of strain as well as the thermal history of the material

  17. Performance of V-4Cr-4Ti material exposed to DIII-D tokamak environment

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, H.; Chung, H.M.; Smith, D.L. [Argonne National Lab., IL (United States)] [and others

    1997-04-01

    Test specimens made with the 832665 heat of V-4Cr-4Ti alloy were exposed in the DIII-D tokamak environment to support the installation of components made of a V-4Cr-4Ti alloy in the radiative divertor of the DIII-D. Some of the tests were conducted with the Divertor Materials Evaluation System (DiMES) to study the short-term effects of postvent bakeout, when concentrations of gaseous impurities in the DIII-D chamber are the highest. Other specimens were mounted next to the chamber wall behind the divertor baffle plate, to study the effects of longer-term exposures. By design, none of the specimens directly interacted with the plasma. Preliminary results from testing the exposed specimens indicate only minor degradation of mechanical properties. Additional testing and microstructural characterization are in progress.

  18. Clinical treatment adherence of health care workers and students exposed to potentially infectious biological material

    Directory of Open Access Journals (Sweden)

    Maria Cristina Mendes de Almeida

    2015-04-01

    Full Text Available OBJECTIVE To assess adherence to clinical appointments by health care workers (HCW and students who suffered accidents with potentially infectious biological material. METHOD A retrospective cross-sectional study that assessed clinical records of accidents involving biological material between 2005 and 2010 in a specialized unit. RESULTS A total of 461 individuals exposed to biological material were treated, of which 389 (84.4% were HCWs and 72 (15.6% students. Of the 461 exposed individuals, 307 (66.6% attended a follow-up appointment. Individuals who had suffered an accident with a known source patient were 29 times more likely to show up to their scheduled follow-up appointments (OR: 29.98; CI95%: 16.09-55.83. CONCLUSION The predictor in both univariate and multivariate analyses for adherence to clinical follow-up appointment was having a known source patient with nonreactive serology for the human immunodeficiency virus and/or hepatitis B and C.

  19. Decontamination of skin exposed to nanocarriers using an absorbent textile material and PEG-12 dimethicone

    International Nuclear Information System (INIS)

    Lademann, J; Richter, H; Knorr, F; Baier, G; Landfester, K; Frazier, L; Gefeller, H; Wunderlich, U; Gross, I; Rühl, E

    2014-01-01

    The removal of noxious particulate contaminants such as pollutants derived from particle-to-gas conversions from exposed skin is essential to avoid the permeation of potentially harmful substances into deeper skin layers via the stratum corneum or the skin appendages and their dispersion throughout the circulatory system. This study is aimed at evaluating the efficacy of using the silicone glycol polymer PEG-12 dimethicone and an absorbent textile material to remove fluorescing hydroxyethyl starch nanocapsules implemented as model contaminants from exposed porcine ear skin. Using laser scanning microscopy, it could be shown that while the application and subsequent removal of the absorbent textile material alone did not result in sufficient decontamination, the combined application with PEG-12 dimethicone almost completely eliminated the nanocapsules from the surface of the skin. By acting as a wetting agent, PEG-12 dimethicone enabled the transfer of the nanocapsules into a liquid phase which was taken up by the absorbent textile material. Only traces of fluorescence remained detectable in several skin furrows and follicular orifices, suggesting that the repeated implementation of the procedure may be necessary to achieve total skin surface decontamination. (letter)

  20. Durability evaluation of photovoltaic blanket materials exposed on LDEF tray S1003

    International Nuclear Information System (INIS)

    Rutledge, S.K.; Olle, R.M.

    1992-01-01

    Several candidate protective coatings on Kapton and uncoated Kapton were exposed to the low Earth orbital (LEO) environment on the Long Duration Exposure Facility (LDEF) to determine if the coatings could be used to protect polymeric substrates from degradation in the LEO environment. The coatings that were evaluated were 700 A of aluminum oxide, 650 A of silicon dioxide, and 650 A of a 4 percent polytetrafluoroethylene-96 percent silicon dioxide mixed coating. All of the coatings evaluated were ion beam sputter deposited. These materials were exposed to a very low atomic oxygen fluence (4.8 x 10 exp 19 atoms/sq. cm) as a result of the experiment tray being located 98 degrees from the ram direction. As a result of the low atomic oxygen fluence, determination of a change in mass was not possible for any of the samples including the uncoated Kapton. There was no evidence of spalling of any of the coatings after the approximately 33,600 thermal cycles recorded for LDEF. The surface of the uncoated Kapton, however, did show evidence of grazing incidence texturing. There was a 7-8 percent increase in solar absorptance for the silicon dioxide and aluminum oxide coated Kapton and only a 4 percent increase for the mixed coating. It appears that the addition of a small amount of fluoropolymer may reduce the magnitude of absorptance increase due to environmental exposure. Thermal emittance did not change significantly for any of the exposed samples. Scanning electron microscopy revealed few micrometeoroid or debris impacts, but the impact sites found indicated that the extent of damage or cracking of the coating around the defect site did not extend beyond a factor of three of the impact crater diameter. This limiting of impact damage is of great significance for the durability of thin film coatings used for protection against the LEO environment

  1. Chemical and Microstructural Changes in Metallic and Ceramic Materials Exposed to Venusian Surface Conditions

    Science.gov (United States)

    Costa, Gustavo C. C.; Jacobson, Nathan S.; Lukco, Dorothy; Hunter, Gary W.; Nakley, Leah; Radoman-Shaw, Brandon G.; Harvey, Ralph P.

    2017-01-01

    (TradeMark) ? exhibited corrosion at the base of the alloy. All ceramics tested showed no clear evidence of reaction. The weight-gain-per-area performance of the materials exposed in the GEER for 10 and 42 days are reported from the lowest to the highest weight gain per area as follows: gold did not exhibit any weight change; nickel-based alloys: beta- NiAl ceramics: considering the experimental uncertainties, no weight change was observed for all ceramics of this work (alpha-Al2O3, Si3N4, SiC, and amorphous SiO2).

  2. "PROCESS and UVolution: photochemistry experiments in Low Earth Orbit": investigation of the photostability of organic and mineral material exposed to Mars surface UV radiation conditions

    Science.gov (United States)

    Stalport, Fabien; Guan, Yuan Yong; Noblet, Audrey; Coll, Patrice; Szopa, Cyril; Macari, Frederique; Person, Alain; Chaput, Didier; Raulin, Francois; Cottin, Hervé

    The harsh martian environment could explain the lack of organics and minerals such as car-bonates by destroying them: i) no organic molecule has been found at the two different landing sites of the Viking landers within the detection limits of the instruments onboard, ii) to date, no large deposits of carbonates have been detected and their detection is specific of local ar-eas and in very low amounts. In this context several experimental and numerical modelling studies were led to evaluate the possibility for the destruction or evolution of the organics and carbonates under the martian surface environmental conditions. The presence of UV radiation has been proposed to explain the photodecomposition of such material. This is the reason why, to investigate the nature, abundance, and stability of organic and mineral material that could survive under such environmental conditions, we exposed in low Earth orbit organic molecules and carbonates (also biominerals) with martian relevance to solar UV radiation ¿ 200 nm, in the frame of the experiment UVolution, onboard the BIOPAN ESA module which was set outside a Russian Foton automated capsule and exposed to space condition during 12 days in September 2007, and the experiment PROCESS (hervé peux tu rajouter quelques infos sur le temps exact d'exposition stp) which was set outside the International Space Station (ISS). Here, we present results with regard to the impact of solar UV radiation on the targeted molecules. Preliminary results indicate that that no organic sample seems to resist to the solar UV radiation if directly exposed to it. Conversely our results show that the exposed carbonates seem to be stable to the solar UV radiation if directly exposed to it. Moreover, the stability of the biominerals strengthens the interest to explore deeper their potential as life records at Mars. Hence they should be considered as primary targets for in situ analyses during future missions.

  3. Development of сertified reference materials set for opened porosity of solid substances and materials (imitators

    Directory of Open Access Journals (Sweden)

    E. P. Sobina

    2016-01-01

    Full Text Available The article deals with data of research for development of certified reference materials set for opened porosity of solid substances and materials (imitators (OPTB SO UNIIM Set Certified Reference Materials GSO 10583-2015. The certified values of opened porosity of metal cylinders were established by the method of hydrostatic weighing before and after boring of holes in. The certified reference materials are intended for calibration and verification of measuring instruments of opened porosity, based on the Boyle - Mariotte's law.

  4. Surface analyses of TiC coated molybdenum limiter material exposed to high heat flux electron beam

    International Nuclear Information System (INIS)

    Onozuka, M.; Uchikawa, T.; Yamao, H.; Kawai, H.; Kousaku, A.; Nakamura, H.; Niikura, S.

    1986-01-01

    Observation and surface analyses of TiC coated molybdenum exposed to high heat flux have been performed to study thermal damage resistance of TiC coated molybdenum limiter material. High heat loads were provided by a 120 kW electron beam facility. (author)

  5. Surface analyses of TiC coated molybdenum limiter material exposed to high heat flux electron beam

    International Nuclear Information System (INIS)

    Onozuka, M.; Uchikawa, T.; Yamao, H.; Kawai, H.; Kousaku, A.; Nakamura, H.; Niikura, S.

    1987-01-01

    Observation and surface analyses of TiC coated molybdenum exposed to high heat flux have been performed to study thermal damage resistance of TiC coated molybdenum limiter material. High heat loads were provided by a 120 kW electron beam facility. SEM, AES and EPMA have been applied to the surface analyses

  6. Towards a Generic Set of Packaging Material Key Figures

    NARCIS (Netherlands)

    ten Klooster, Roland; de Koeijer, Bjorn; de Lange, Jos

    Many companies consider the reduction of packaging material as a relevant development direction, either required by cost savings, supply chain efficiency, sustainability or substantiated by regulations (directive 94/62/EC). This aligns with an eco-efficient redundancy perspective on packaging.

  7. Material properties of oxide dispersion strengthened (ODS) ferritic steels for core materials of FBR. Tensile properties of sodium exposed and nickel diffused materials

    International Nuclear Information System (INIS)

    Kato, Shoichi; Yoshida, Eiichi

    2002-12-01

    An oxide dispersion strengthened (ODS) ferritic steel is candidate for a long-life core materials of future FBR, because of good swelling resistance and high creep strength. In this study, tensile tests were carried out the long-term extrapolation of sodium environmental effects on the mechanical properties of ODS steels. The tested heats of materials are M93, M11 and F95. The specimens were pre-exposed to sodium for 1,000 and 3,000 hours under non-stress conditions. The pre-exposure to sodium was conducted using a sodium test loop constituted by austenitic steels. For the conditions of sodium exposure test, the sodium temperature was 650 and 700degC, the oxygen concentration in sodium was about 1 ppm and sodium flow rate on the surface of specimen was less than 1x10 -4 m/seconds (nearly static). Further the specimen with the nickel diffused was prepared, which is simulate to nickel diffusing through sodium from the surface of structural stainless steels. The main results obtained were as follows; (1) The tensile strength and the fracture elongation after sodium exposure (maximum 3,000 hours) were same as that of as-received materials. If was considered that the sodium environmental effect is negligible under the condition of this study. (2) Tensile properties of nickel diffused specimens were slightly lower than that of the as-received specimens, but it remains equal to that of thermal aging specimens. (3) The change in microstructure such as a degraded layer was observed on the surface of nickel diffused specimen. In the region of the degraded layer, phase transformations from the α-phase to the γ-phase were recognized. But, the microscopic oxide particles were observed same as that of α-phase base metal. (author)

  8. Some aspects of the formulation of alginate dental impression materials--setting characteristics and mechanical properties.

    Science.gov (United States)

    Nallamuthu, Navina A; Braden, Michael; Patel, Mangala P

    2012-07-01

    To study the role of the various components of alginate dental impression materials. Experimental materials were formulated and their physical properties characterized and compared to commercially available counterparts (Neocolloid, Palgat Plus and Blueprint Cremix). Properties examined were: dimensional stability and weight change in water and artificial saliva; setting behavior; Shore A hardness and tear energy. The role of magnesium oxide was also investigated. Weight changes in water and artificial saliva can be attributed to an initial thermodynamic potential owing to the ionic content of the alginate, causing water to diffuse into the material. Water is then driven back out following a reversal of this potential. Hardness results for experimental materials were within the range obtained from the commercial materials. The hardness value for an experimental formulation that did not contain magnesium oxide was lower than values from the other experimental materials that did. Tear energies for all three experimental materials were greater than those of the commercial products. There were statistically significant differences between the two experimental materials that contained magnesium oxide and one that did not. With regard to setting time, statistically significant differences were seen between commercial materials and two of the experimental materials. The experimental material that did not contain magnesium oxide had a considerably longer setting time than all of the other materials tested. The key role of magnesium oxide in the setting reaction and the effect on hardness have been demonstrated and discussed. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  9. Influence of plasma parameters in pulsed plasma gun on modification processes in exposed structural materials

    International Nuclear Information System (INIS)

    Byrka, O.V.; Bandura, A.N.; Chebotarev, V.V.; Garkusha, I.E.; Garkusha, V.V.; Makhai, V.A.; Tereshin, V.I.

    2011-01-01

    This paper is focused on investigation of helium, nitrogen and krypton plasma streams generated by pulsed plasma gun (PPA). The main objection of this study is adjustment of plasma treatment regimes for different materials that allows achieving optimal thickness of modified layer with simultaneously minimal value of surface roughness. Features of materials alloying from gas and metallic plasma as a result of the plasma ions mixing with the steel substrate in liquid phase are discussed also.

  10. Characterization of Candidate Solar Sail Material Exposed to Space Environmental Effects

    Science.gov (United States)

    Edwards, David; Hovater, Mary; Hubbs, Whitney; Wertz, George; Hollerman, William; Gray, Perry

    2003-01-01

    Solar sailing is a unique form of propulsion where a spacecraft gains momentum from incident photons. Solar sails are not limited by reaction mass and provide continual acceleration, reduced only by the lifetime of the lightweight film in the space environment and the distance to the Sun. Once thought to be difficult or impossible, solar sailing has come out of science fiction and into the realm of possibility. Any spacecraft using this method would need to deploy a thin sail that could be as large as many kilometers in extent. The availability of strong, ultra lightweight, and radiation resistant materials will determine the future of solar sailing. The National Aeronautics and Space Administration's Marshall Space Flight Center (MSFC) is concentrating research into the utilization of ultra lightweight materials for spacecraft propulsion. The Space Environmental Effects Team at MSFC is actively characterizing candidate solar sail material to evaluate the thermo-optical and mechanical properties after exposure to space environmental effects. This paper will describe the exposure of candidate solar sail materials to emulated space environmental effects including energetic electrons, combined electrons and Ultraviolet radiation, and hypervelocity impact of irradiated solar sail material. This paper will describe the testing procedure and the material characterization results of this investigation.

  11. Radiation processing of organics and biological materials exposed to ocean world surface conditions.

    Science.gov (United States)

    Hand, K. P.; Carlson, R. W.

    2017-12-01

    Assessing the habitability of ocean worlds, such as Europa and Enceladus, motivates a search for endogenous carbon compounds that could be indicative of a habitable, or even inhabited, subsurface liquid water environment. We have examined the role of destruction and synthesis of organic compounds via 10 keV electron bombardment of ices generated under temperature and pressure conditions comparable to Europa and Enceladus. Short-chain organics and ammonia, in combination with water, were exposed to Mrad to Grad doses and observed to evolve to a `lost' carbon fraction (CO and CO2) and a `retained' carbon fraction (consisting of a highly refractory `ocean world tholin' populated by highly radiation resistant carbonyl, aldehyde, and nitrile components). The retained fraction is of key importance as this likely represents the observable fraction for future spacecraft investigations. We also irradiated microbial spores (B. pumilis) to approximately 2 Grad and have found persistence of biomolecule fractions derived from proteins and nucleic acids.

  12. Lower life satisfaction related to materialism in children frequently exposed to advertising

    NARCIS (Netherlands)

    Opree, S.J.; Buijzen, M.; Valkenburg, P.M.

    2012-01-01

    OBJECTIVE: Research among adults suggests that materialism and life satisfaction negatively influence each other, causing a downward spiral. So far, cross-sectional research among children has indicated that materialistic children are less happy, but causality remains uncertain. This study adds to

  13. Flash autoclave settings may influence eradication but not presence of well-established biofilms on orthopaedic implant material.

    Science.gov (United States)

    Williams, Dustin L; Taylor, Nicholas B; Epperson, Richard T; Rothberg, David L

    2017-10-04

    Flash autoclaving is one of the most frequently utilized methods of sterilizing devices, implants or other materials. For a number of decades, it has been common practice for surgeons to remove implantable devices, flash autoclave and then reimplant them in a patient. Data have not yet indicated the potential for biofilms to survive or remain on the surface of orthopaedic-relevant materials following flash autoclave. In this study, monomicrobial and polymicrobial biofilms were grown on the surface of clinically relevant titanium materials and exposed to flash autoclave settings that included varying times and temperatures. Data indicated that when the sterilization and control temperatures of an autoclave were the same, biofilms were able to survive flash autoclaving that was performed for a short duration. Higher temperature and increased duration rendered biofilms non-viable, but none of the autoclave settings had the ability to remove or disperse the presence of biofilms from the titanium surfaces. These findings may be beneficial for facilities, clinics, or hospitals to consider if biofilms are suspected to be present on materials or devices, in particular implants that have had associated infection and are considered for re-implantation. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  14. Investigations into the self-welding behavior of metallic materials exposed to sodium

    International Nuclear Information System (INIS)

    Huber, F.; Mattes, K.

    1976-01-01

    To determine the parameters responsible for selfwelding, experimental investigations were carried out at the Karlsruhe Nuclear Research Center. These activities are related to the SNR 300 prototype sodium-cooled fast breeder reactor. The experimental equipment, test materials and conditions as well as the results obtained are described and an attempt is made to present a general applicable explanation of the self-welding phenomena

  15. Amplification of the Luminescence Response in Organic Materials Exposed to Ionizing Radiation

    International Nuclear Information System (INIS)

    Michel, M.; Rocha, L.; Hamel, M.; Normand, S.

    2013-06-01

    Polymer-based scintillators present interesting features for the field of ionizing radiation detection, related to the high sensitivity of fluorescence techniques coupled to the manufacturing advantages of such materials. Organic materials can indeed be manufactured into large sensing areas with different geometrical conformations through low-cost fabrication techniques. While results herein presented focus on liquids, the same phenomena would occur in solid samples. Widely used for sensing applications because of its high sensitivity, fluorescence has yet been further improved using technologies yielded by research in photonics. It has already been shown that the use of nano-structuring for sensing applications enables previously unattained sensitivities. Herein we propose a technique based on the manipulation of light using nano-structuring of the detection medium in order to enable the amplification of the sensitive material emission. This amplification of the luminescence signal is aimed at reducing the detection limit of low-energy beta emitters such as tritium, well-known issue of major importance. The first step of our study, presented here, consists in demonstrating the ability of well-known scintillators to emit in laser regime when optically excited in a Distributed Feedback scheme. They are, to our knowledge, the first of their kind. The technique here presented, being usable whatever the sample maximum emission wavelength, should also enable a simplification of the devices based on scintillators. (authors)

  16. Thermoluminescence kinetics in materials exposed to the low doses applicable to dating and dosimetry

    International Nuclear Information System (INIS)

    Levy, P.W.

    1984-11-01

    Thermoluminescence (TL) kinetics have been investigated for low dose situations applicable to dating, dosimetry, and recent geological deposits. Studied were the general one-trap kinetic equation, which reduces to the well known 1st and 2nd order kinetic equations when various assumptions apply, and the interactive kinetic equations, which describes TL in materials exhibiting more than one glow peak. In materials with one glow peak area varies linearly with dose; however, peak height is not linear with dose unless the TL obeys 1st order kinetics at all doses. In materials with two or more glow peaks neither peak height nor peak area varies linearly with dose, except in special situations. In fact, many peak height vs dose curves will be supralinear with the initial low-slope region occurring at relatively low doses. These considerations indicate: (1) Dating and dosimetry technique based on assumed linear peak height vs dose curves will usually underestimate the accumulated dose. (2) Dating techniques can be improved and/or made more reliable by determining the TL kinetics of the glow peaks measured

  17. Properties of concrete containing different type of waste materials as aggregate replacement exposed to elevated temperature – A review

    Science.gov (United States)

    Ghadzali, N. S.; Ibrahim, M. H. W.; Sani, M. S. H. Mohd; Jamaludin, N.; Desa, M. S. M.; Misri, Z.

    2018-04-01

    Concrete is the chief material of construction and it is non-combustible in nature. However, the exposure to the high temperature such as fire can lead to change in the concrete properties. Due to the higher temperature, several changes in terms of mechanical properties were observed in concrete such as compressive strength, modulus of elasticity, tensile strength and durability of concrete will decrease significantly at high temperature. The exceptional fire-proof achievement of concrete is might be due to the constituent materials of concrete such as its aggregates. The extensive use of aggregate in concrete will leads to depletion of natural resources. Hence, the use of waste and other recycled and by-product material as aggregates replacements becomes a leading research. This review has been made on the utilization of waste materials in concrete and critically evaluates its effects on the concrete performances during the fire exposure. Therefore, the objective of this paper is to review the previous search work regarding the concrete containing waste material as aggregates replacement when exposed to elevated temperature and come up with different design recommendations to improve the fire resistance of structures.

  18. Sanitary Assessment of Hazardous Materials Exposed To Highly Toxic Chemical Compounds

    International Nuclear Information System (INIS)

    Rembovskiy, V.; Ermolaeva, E.

    2007-01-01

    Industrial or terroristic accidents in which toxic chemicals (TC) are the main or attendant damaging factors should be regarded as a new challenge for experts, because of little knowledge on the methodology to estimating the long-term risk for humans due to contamination of the building materials and environment. In the Russian Federation, there appeared to be a kind of model systems for developing an algorithm for solving these or similar problems. Under dismantling and liquidation of the former facilities for chemical weapon production (FCWP) the building materials are regarded as potential waste products the fate of which (processing, warehousing, utilization, and destruction) is dependent on their possible hazard for human population and environment. The standard approaches for hazard assessment of waste products of the FCWP turned out to be insufficient. When conducting the present work, the following problems have been solved: 1. Selection of representative samples taking into consideration a diversity of construction materials, great quantities of potentially toxic waste materials, information on the production conditions, breakdowns in the process of production, accidents, composition of the decontaminators used, decontamination frequency, etc. 2. Analysis of TC in composite matrixes complicated by the following problems: extraction, masking effects of concomitant components during indirect analysis, lack of certified methods of direct analysis of TC, discrepancy of results of GC and direct GCMS analysis, low sensitivity of GCMS analysis, big volume of samples (more than 0.5 kg), heterogeneity of physical-chemical properties of different matrixes influencing the process of degradation of TC. 3. Hazard assessment of the wastes in toxic-and-sanitary experiment relying on non-specific signs of intoxication due to relatively low percentage of TC and masking effects of various matrix components. Application of the integral toxicity tests with soil

  19. Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material

    International Nuclear Information System (INIS)

    2006-01-01

    In the course of employment, individuals might work with radioactive materials that, under certain circumstances, could be taken into the body. Protecting workers against risks of incorporated radionuclides requires the monitoring of potential intakes and/or the quantification of actual intakes and exposures. The selection of measures and programmes for this purpose requires decisions concerning methods, techniques, frequencies etc. for measurements and dose assessment. The criteria permitting the evaluation of the necessity of such a monitoring programme or for the selection of methods and frequencies of monitoring usually depend upon the legislation, the purpose of the radiation protection programme, the probabilities of potential radionuclide intakes, and the characteristics of the materials handled. This International Standard offers guidance for the decision whether a monitoring programme is required and how it should be designed. Its intention is to optimise the efforts for such a monitoring programme consistent with legal requirements and with the purpose of the radiation protection programme. Recommendations of international expert bodies and international experience with the practical application of these recommendations in radiation protection programmes have been considered in the development of this International Standard. Its application facilitates the exchanges of information between authorities, supervisory institutions and employers. The International Standard is not a substitute for legal requirements. In the International Standard, the word 'shall' is used to denote a requirement and no deviation is allowed. The word 'should' is used to denote a recommendation from which justified deviations are allowed. The word 'may' is used to denote permission

  20. Functional relationship of room temperature and setting time of alginate impression material

    Directory of Open Access Journals (Sweden)

    Dyah Irnawati

    2009-09-01

    Full Text Available Background: Indonesia is a tropical country with temperature variation. A lot of dental clinics do not use air conditioner. The room temperature influences water temperature for mixing alginate impression materials. Purpose: The aim of this study was to investigate the functional relationship of room temperature and initial setting time of alginate impression materials. Methods: The New Kromopan® alginate (normal and fast sets were used. The initial setting time were tested at 23 (control, 24, 25, 26, 27, 28, 29, 30 and 31 degrees Celcius room temperatures (n = 5. The initial setting time was tested based on ANSI/ADA Specification no. 18 (ISO 1563. The alginate powder was mixed with distilled water (23/50 ratio, put in the metal ring mould, and the initial setting time was measured by test rod. Data were statistically analyzed by linear regression (α = 0.05. result: The initial setting times were 149.60 ± 0.55 (control and 96.40 ± 0.89 (31° C seconds for normal set, and 122.00 ± 1.00 (control and 69.60 ± 0.55 (31° C seconds for fast set. The coefficient of determination of room temperature to initial setting time of alginate were R2 = 0.74 (normal set and R2 = 0.88 (fast set. The regression equation for normal set was Y = 257.6 – 5.5 X (p < 0.01 and fast set was Y = 237.7 – 5.6 X (p < 0.01. Conclusions: The room temperature gave high contribution and became a strength predictor for initial setting time of alginates. The share contribution to the setting time was 0.74% for normal set and 0.88% for fast set alginates.

  1. Transport and diffusion of material quantities on propagating interfaces via level set methods

    CERN Document Server

    Adalsteinsson, D

    2003-01-01

    We develop theory and numerical algorithms to apply level set methods to problems involving the transport and diffusion of material quantities in a level set framework. Level set methods are computational techniques for tracking moving interfaces; they work by embedding the propagating interface as the zero level set of a higher dimensional function, and then approximate the solution of the resulting initial value partial differential equation using upwind finite difference schemes. The traditional level set method works in the trace space of the evolving interface, and hence disregards any parameterization in the interface description. Consequently, material quantities on the interface which themselves are transported under the interface motion are not easily handled in this framework. We develop model equations and algorithmic techniques to extend the level set method to include these problems. We demonstrate the accuracy of our approach through a series of test examples and convergence studies.

  2. Transport and diffusion of material quantities on propagating interfaces via level set methods

    International Nuclear Information System (INIS)

    Adalsteinsson, David; Sethian, J.A.

    2003-01-01

    We develop theory and numerical algorithms to apply level set methods to problems involving the transport and diffusion of material quantities in a level set framework. Level set methods are computational techniques for tracking moving interfaces; they work by embedding the propagating interface as the zero level set of a higher dimensional function, and then approximate the solution of the resulting initial value partial differential equation using upwind finite difference schemes. The traditional level set method works in the trace space of the evolving interface, and hence disregards any parameterization in the interface description. Consequently, material quantities on the interface which themselves are transported under the interface motion are not easily handled in this framework. We develop model equations and algorithmic techniques to extend the level set method to include these problems. We demonstrate the accuracy of our approach through a series of test examples and convergence studies

  3. Characteristics of sets of diffusion photographic materials for rapid X-ray radiography

    International Nuclear Information System (INIS)

    Gusev, E.A.; Neduv, A.M.; Korolev, A.I.; Mirzoyan, I.N.; Chelnokov, V.B.

    1989-01-01

    Peculiarities of application in X-ray radiography of roentgenographic films, roentgenographic paper, xeroroentgenographic plates and sets of diffusion photographic materials are considered. It is shown that the use of diffusion photographic materials for X-ray radiography permits to reduce the process labour consumption and to considerably reduce the time for the obtaining of a dry positive image and also to reduce the consumption of silver, but the image will preserve high information content. Selts of diffusion photographic materials are developed, which contain bromoiodosilver negative material with silver spraying of 2-3 g/m 3 and transparent positive material on Dacron basis. Prospects of application of sets of diffusion photographic materials in the practice of rapid X-ray radiography to solve the problems of industrial X-ray defectoscopy are panted out

  4. Discontinuous phase formation and selective attack of SiC materials exposed to low oxygen partial pressure environments

    Energy Technology Data Exchange (ETDEWEB)

    Butt, D.P. [Los Alamos National Lab., NM (United States); Tressler, R.E.; Spear, K.E. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Materials Science and Engineering

    1993-09-01

    Three SiC materials were exposed to gas mixtures containing N{sub 2}, H{sub 2}, and CO at 1000-1300C, 1-740 torr for a few to 1000 h. Kinetic and thermodynamic studies indicate that CO is the predominant oxidizing species. A variety of corrosion processes were observed, including surface and internal pit formation, needle growth, grain boundary attack, and attack of impurities and surrounding material. In the case of a siliconized SiC, impurities such as Ca, Al, and Fe diffused rapidly through the Si matrix forming complex calcium aluminosilicates on the surface, leaving behind internal voids. Evaluation of the mechanical properties, including fractography, revealed a variety of degradative phenomena. Efforts to identify causes of pit formation suggested that the overall process was complex. Pits formed during attack of grain boundaries and regions containing transition metal impurities. Studies of single crystals showed preferential attack near impurities and crystalline defects, indicating that damaged crystals or certain crystal orientations in the polycrystalline materials are susceptible to attack. In addition, under some conditions where pit formation was observed, the strength of certain materials increased apparently due to flaw healing. It is suggested that flaws can heal in the absence of mechanical stress due to their high surface energy. However, second phases observed within partially healed surface cracks suggest impurities also contribute to the flaw healing processes.

  5. Damage development, phase changes, transport properties, and freeze-thaw performance of cementitious materials exposed to chloride based salts

    Science.gov (United States)

    Farnam, Yaghoob

    Recently, there has been a dramatic increase in premature deterioration in concrete pavements and flat works that are exposed to chloride based salts. Chloride based salts can cause damage and deterioration in concrete due to the combination of factors which include: increased saturation, ice formation, salt crystallization, osmotic pressure, corrosion in steel reinforcement, and/or deleterious chemical reactions. This thesis discusses how chloride based salts interact with cementitious materials to (1) develop damage in concrete, (2) create new chemical phases in concrete, (3) alter transport properties of concrete, and (4) change the concrete freeze-thaw performance. A longitudinal guarded comparative calorimeter (LGCC) was developed to simultaneously measure heat flow, damage development, and phase changes in mortar samples exposed to sodium chloride (NaCl), calcium chloride (CaCl 2), and magnesium chloride (MgCl2) under thermal cycling. Acoustic emission and electrical resistivity measurements were used in conjunction with the LGCC to assess damage development and electrical response of mortar samples during cooling and heating. A low-temperature differential scanning calorimetry (LT-DSC) was used to evaluate the chemical interaction that occurs between the constituents of cementitious materials (i.e., pore solution, calcium hydroxide, and hydrated cement paste) and salts. Salts were observed to alter the classical phase diagram for a salt-water system which has been conventionally used to interpret the freeze-thaw behavior in concrete. An additional chemical phase change was observed for a concrete-salt-water system resulting in severe damage in cementitious materials. In a cementitious system exposed to NaCl, the chemical phase change occurs at a temperature range between -6 °C and 8 °C due to the presence of calcium sulfoaluminate phases in concrete. As a result, concrete exposed to NaCl can experience additional freeze-thaw cycles due to the chemical

  6. Booster: Development of a Toolbox for Triage of a Large Group of Individuals Exposed to Radioactive Material

    International Nuclear Information System (INIS)

    Schoepff, V.; Carrel, F.; Gmar, M.; Lemaire, H.; Carvajal, F.; Perez-Llopis, I.; Gaboriau, D.-C.; Morrison, C.-G.; Almasi, I.; Szabo, S.; Kovacs, A; Szeles, E.; Amgarou, K.; Menaa, N.; Morat, L.; Testard, I.; Ugolin, N.; Viau, M.; Becker, F.; Raskob, W.; Trybushnyi, D.; Vincze, A.

    2013-06-01

    The effective management of an event involving the exposure of a large number of people to radioactive material requires a mechanism for fast triage of exposed people. BOOSTER is a project founded by the European Union under the Seventh Framework Programme, addressing this requirement. It is a capability project designed to provide an integrated system which could easily be deployed and used. For this purpose, the BOOSTER consortium, relying on the expertise of seven members, researches and develops new approaches to allow an effective and fast management of most kind of nuclear threats. BOOSTER System was designed to help first responders mitigating the crisis by providing the necessary information to quickly assess the radiological situation, to support triage staff in performing an efficient and fast categorization of the potentially affected victims, and to give medical staff crucial information for further treatment at medium or long term post-accident. (authors)

  7. Damage behavior of REE-doped W-based material exposed to high-flux transient heat loads

    International Nuclear Information System (INIS)

    Shi, Jing; Luo, Lai–Ma; Lin, Jin–shan; Zan, Xiang; Zhu, Xiao–yong; Xu, Qiu; Wu, Yu–Cheng

    2016-01-01

    Pure W and W-Lu alloys were prepared by mechanical alloying (MA) and spark plasma sintering (SPS) technology. The performance and relevant damage mechanism of W-(0%, 2%, 5%, 10%) Lu alloys under transient heat loads were investigated using a laser beam heat load test to simulate the transient events in future nuclear fusion reactors. Scanning electron microscopy was used to observe the morphologies of the damaged surfaces and energy dispersive X-ray spectroscopy was used to conduct composition analysis. Damages to the surface such as cracks, pits, melting layers, Lu-rich droplets, and thermal ablation were observed. A mass of dense fuzz-like nanoparticles formed on the outer region of the laser-exposed area. Recrystallization, grain growth, increased surface roughness, and material erosion were also observed. W-Lu samples with low Lu content demonstrated better thermal performance than pure W, and the degree of damage significantly deteriorated under repetitive transient heat loads.

  8. Effects of the material composition in the TL curves of alkaline halides with Eu2+ exposed to β radiation

    International Nuclear Information System (INIS)

    Perez S, R.; Piters, T.; Aceves, R.; Rodriguez M, R.

    2006-01-01

    The solid state dosemeters plays a very important paper in the growing use of the ionizing radiation. When being increased the use of the radioactive isotopes in the medicine and in the industry, the necessity to have materials but adapted in each case it has increased. To synthesize such materials, it is necessary to enlarge the knowledge on the paper that its play the physical characteristics of the crystals such as the crystalline structure, the lattice constant, imbibed nano structures, dislocations, ions size, electronic states of the ions, etc., on the effects of the ionizing radiation. In the past its have been carried out many studies approaching these problems in some materials, but we consider that its are insufficient before the challenges of the applications. To contribute to the understanding of these effects, we present a study focused to alkaline halide crystals impurified with Eu 2+ ions, making an analysis on the paper that its play a) the ions concentration of Eu 2+ in KBr: Eu 2+ , b) the different sites of trapping of electrons and holes in KBr: Eu 2+ , KCl: Eu 2+ , RbBr:Eu 2+ , RbCl: Eu 2+ and c) the composition of the crystalline solid solutions KCl x Br 1-X : Eu 2+ and RbCI x KBr 1-x : Eu 2+ on the thermoluminescence curve when these materials are exposed to small dose of β irradiation. The increase in the concentration of Eu 2+ ions produces a smaller relative intensity of the emissions of high temperature for a given dose and it is found that in a RbCl x KBr 1-x : Eu 2+ with the greater/smaller concentration of Cl - ions, the temperature of the characteristic emission is near to the 453/373 K. The composition x of halogenous ions and not the one of alkaline in the crystalline solid solution dominates the landslide of the temperature of the emission. (Author)

  9. Material control study: a directed graph and fault tree procedure for adversary event set generation

    International Nuclear Information System (INIS)

    Lambert, H.E.; Lim, J.J.; Gilman, F.M.

    1978-01-01

    In work for the United States Nuclear Regulatory Commission, Lawrence Livermore Laboratory is developing an assessment procedure to evaluate the effectiveness of a potential nuclear facility licensee's material control (MC) system. The purpose of an MC system is to prevent the theft of special nuclear material such as plutonium and highly enriched uranium. The key in the assessment procedure is the generation and analysis of the adversary event sets by a directed graph and fault-tree methodology

  10. Compatibility Study for Plastic, Elastomeric, and Metallic Fueling Infrastructure Materials Exposed to Aggressive Formulations of Ethanol-blended Gasoline

    Energy Technology Data Exchange (ETDEWEB)

    Kass, Michael D [ORNL; Pawel, Steven J [ORNL; Theiss, Timothy J [ORNL; Janke, Christopher James [ORNL

    2012-07-01

    In 2008 Oak Ridge National Laboratory began a series of experiments to evaluate the compatibility of fueling infrastructure materials with intermediate levels of ethanol-blended gasoline. Initially, the focus was elastomers, metals, and sealants, and the test fuels were Fuel C, CE10a, CE17a and CE25a. The results of these studies were published in 2010. Follow-on studies were performed with an emphasis on plastic (thermoplastic and thermoset) materials used in underground storage and dispenser systems. These materials were exposed to test fuels of Fuel C and CE25a. Upon completion of this effort, it was felt that additional compatibility data with higher ethanol blends was needed and another round of experimentation was performed on elastomers, metals, and plastics with CE50a and CE85a test fuels. Compatibility of polymers typically relates to the solubility of the solid polymer with a solvent. It can also mean susceptibility to chemical attack, but the polymers and test fuels evaluated in this study are not considered to be chemically reactive with each other. Solubility in polymers is typically assessed by measuring the volume swell of the polymer exposed to the solvent of interest. Elastomers are a class of polymers that are predominantly used as seals, and most o-ring and seal manufacturers provide compatibility tables of their products with various solvents including ethanol, toluene, and isooctane, which are components of aggressive oxygenated gasoline as described by the Society of Automotive Engineers (SAE) J1681. These tables include a ranking based on the level of volume swell in the elastomer associated with exposure to a particular solvent. Swell is usually accompanied by a decrease in hardness (softening) that also affects performance. For seal applications, shrinkage of the elastomer upon drying is also a critical parameter since a contraction of volume can conceivably enable leakage to occur. Shrinkage is also indicative of the removal of one or more

  11. Level Set-Based Topology Optimization for the Design of an Electromagnetic Cloak With Ferrite Material

    DEFF Research Database (Denmark)

    Otomori, Masaki; Yamada, Takayuki; Andkjær, Jacob Anders

    2013-01-01

    . A level set-based topology optimization method incorporating a fictitious interface energy is used to find optimized configurations of the ferrite material. The numerical results demonstrate that the optimization successfully found an appropriate ferrite configuration that functions as an electromagnetic......This paper presents a structural optimization method for the design of an electromagnetic cloak made of ferrite material. Ferrite materials exhibit a frequency-dependent degree of permeability, due to a magnetic resonance phenomenon that can be altered by changing the magnitude of an externally...

  12. Healing process following application of set or fresh mineral trioxide aggregate as a root-end filling material.

    Science.gov (United States)

    Habibi, Mehdi; Ghoddusi, Jamileh; Habibi, Ataollah; Mohtasham, Nooshin

    2011-01-01

    An unsuccessful attempt to reach the apical area or to place the retrograde material is a major difficulty in periradicular surgery. The aim of this study was to compare the histological evaluation of the healing process following an orthograde versus a retrograde application of mineral trioxide aggregate (MTA) as a root-end filling material during apical surgery on cats' teeth in order to find out whether orthograde placement of MTA before surgery can be used instead of retrograde placement during surgery. In this experimental study, 24 canine teeth in 12 mature and healthy cats were filled with either MTA or gutta-percha in an orthograde manner. Two weeks later, the teeth with MTA were surgically exposed and resected to the set-MTA within the canals. The teeth previously filled by gutta-percha were also surgically exposed, and retrograde cavities were prepared at the root ends and filled with fresh-MTA. After 8 weeks, the animals were euthanized by vital perfusion. Six-micron histological slices were prepared from samples, stained by Hematoxylin & Eosin, and histologically studied by means of a light microscope. The collected data was analyzed by the Chi-square and the T-test. One of the samples in the fresh-MTA group was omitted during processing because of inappropriate sectioning. In the set-MTA group, 5 out of 12 showed chronic abscess, while in the fresh-MTA group, 2 out of 11 were discovered to have chronic abscess; however, no significant difference was observed (P>.05). Hard tissue healing (cementum, bone, cementum + bone formation) in the set-MTA and fresh-MTA groups were 7 out of 12 and 9 out of 11, respectively. While healing seemed more likely to occur in the fresh-MTA group, the difference was statistically insignificant (P>.05). The magnitude of bone, cementum, or bone and cementum formation showed slight differences between the two groups; however, the figures failed to show any marked differences (P>.05). Orthograde placement of MTA could be used

  13. The influence of storage duration on the setting time of type 1 alginate impression material

    Science.gov (United States)

    Rahmadina, A.; Triaminingsih, S.; Irawan, B.

    2017-08-01

    Alginate is one of the most commonly used dental impression materials; however, its setting time is subject to change depending on storage conditions and duration. This creates problems because consumer carelessness can affect alginate shelf life and quality. In the present study, the setting times of two groups of type I alginate with different expiry dates was tested. The first group consisted of 11 alginate specimens that had not yet passed the expiry date, and the second group consisted of alginates that had passed the expiry date. The alginate powder was mixed with distilled water, poured into a metal ring, and tested with a polished rod of poly-methyl methacrylate. Statistical analysis showed a significant difference (p<0.05) between the setting times of the alginate that had not passed the expiry date (157 ± 3 seconds) and alginate that had passed the expiry date (144 ± 2 seconds). These findings indicate that storage duration can affect alginate setting time.

  14. Buildings exposed to fire

    International Nuclear Information System (INIS)

    1987-01-01

    The 24 lectures presented to the colloquium cover the following subject fields: (1) Behaviour of structural components exposed to fire; (2) Behaviour of building materials exposed to fire; (3) Thermal processes; (4) Safety related, theoretical studies. (PW) [de

  15. Airborne and truck-borne ``radiation footprints`` of areas producing, storing, using or being exposed to nuclear materials

    Energy Technology Data Exchange (ETDEWEB)

    Pavlik, B; Bottos, F [Picodas Group Inc., Richmond Hill, ON (Canada); Cuneen, P J [World Geoscience Corp. Ltd., Perth (Australia); Jurza, P; Hoeschl, V [Picodas Prague s.r.o., Prague (Czech Republic)

    1997-11-01

    The paper discusses the use of advanced Airborne Gamma Ray Spectrometer for environmental assessment of nuclear radiation in areas exposed to radioactive materials. The use of high capacity real time processors operating in parallel mode packaged into one mechanical enclosure together with navigation, allows implementation of highly sophisticated proprietary algorithms to produce results in absolute physical units. Airborne footprinting provides rapid, well defined spatial images of natural and manmade radioactive contamination. Integrated GPS guidance systems provides instant position information related to the internal geographical data base. Short time span of data acquisition provides consistent data. Airborne acquisition of data guarantees good spatial resolution. Airborne measurements are calculated via special algorithms in absolute units and related to the individual radioactive nuclei on the ground in real time. Full raw and calculated data recording is provided including the position coordinates. More precise results may be achieved via post flight processing. Principles of ground contamination estimates measured from the air and the sensitivities for different radioactive nuclei are also discussed. Results from an Ontario Hydro (Canada) test over a nuclear power plant, an Atom bomb blast measurements in Maralinga (Australia), after 40 years, and a Nuclear power plant in Slovakia and Uranium mining area in Germany are presented and discussed. (author). 6 refs, 1 fig.

  16. Airborne and truck-borne ''radiation footprints'' of areas producing, storing, using or being exposed to nuclear materials

    International Nuclear Information System (INIS)

    Pavlik, B.; Bottos, F.; Cuneen, P.J.; Jurza, P.; Hoeschl, V.

    1997-01-01

    The paper discusses the use of advanced Airborne Gamma Ray Spectrometer for environmental assessment of nuclear radiation in areas exposed to radioactive materials. The use of high capacity real time processors operating in parallel mode packaged into one mechanical enclosure together with navigation, allows implementation of highly sophisticated proprietary algorithms to produce results in absolute physical units. Airborne footprinting provides rapid, well defined spatial images of natural and manmade radioactive contamination. Integrated GPS guidance systems provides instant position information related to the internal geographical data base. Short time span of data acquisition provides consistent data. Airborne acquisition of data guarantees good spatial resolution. Airborne measurements are calculated via special algorithms in absolute units and related to the individual radioactive nuclei on the ground in real time. Full raw and calculated data recording is provided including the position coordinates. More precise results may be achieved via post flight processing. Principles of ground contamination estimates measured from the air and the sensitivities for different radioactive nuclei are also discussed. Results from an Ontario Hydro (Canada) test over a nuclear power plant, an Atom bomb blast measurements in Maralinga (Australia), after 40 years, and a Nuclear power plant in Slovakia and Uranium mining area in Germany are presented and discussed. (author)

  17. ELT Materials: The Key to Fostering Effective Teaching and Learning Settings

    Directory of Open Access Journals (Sweden)

    Astrid Núñez Pardo

    2009-10-01

    Full Text Available Our article aims at providing teachers with an overview for materials development, taking into account the experience gained by two teachers in the English Programme of the School of Education at Universidad Externado de Colombia in Bogotá. This experience has helped us achieve better teaching and learning conditions for our university students in their quest to learn a foreign language. This paper addresses the issue of the role of teachers as textbook developers, and how they can meet materials development demands by integrating a clear conceptualisation and set of principles as well as their essential components.

  18. Intra-facility linkage of HIV-positive mothers and HIV-exposed babies into HIV chronic care: rural and urban experience in a resource limited setting.

    Directory of Open Access Journals (Sweden)

    Christine Mugasha

    Full Text Available INTRODUCTION: Linkage of HIV-infected pregnant women to HIV care remains critical for improvement of maternal and child outcomes through prevention of maternal-to-child transmission of HIV (PMTCT and subsequent chronic HIV care. This study determined proportions and factors associated with intra-facility linkage to HIV care and Early Infant Diagnosis care (EID to inform strategic scale up of PMTCT programs. METHODS: A cross-sectional review of records was done at 2 urban and 3 rural public health care facilities supported by the Infectious Diseases Institute (IDI. HIV-infected pregnant mothers, identified through routine antenatal care (ANC and HIV-exposed babies were evaluated for enrollment in HIV clinics by 6 weeks post-delivery. RESULTS: Overall, 1,025 HIV-infected pregnant mothers were identified during ANC between January and June, 2012; 267/1,025 (26% in rural and 743/1,025 (74% in urban facilities. Of these 375/1,025 (37% were linked to HIV clinics [67/267(25% rural and 308/758(41% urban]. Of 636 HIV-exposed babies, 193 (30% were linked to EID. Linkage of mother-baby pairs to HIV chronic care and EID was 16% (101/636; 8/179 (4.5%] in rural and 93/457(20.3% in urban health facilities. Within rural facilities, ANC registration <28 weeks-of-gestation was associated with mothers' linkage to HIV chronic care [AoR, 2.0 95% CI, 1.1-3.7, p = 0.019] and mothers' multi-parity was associated with baby's linkage to EID; AoR 4.4 (1.3-15.1, p = 0.023. Stigma, long distance to health facilities and vertical PMTCT services affected linkage in rural facilities, while peer mothers, infant feeding services, long patient queues and limited privacy hindered linkage to HIV care in urban settings. CONCLUSION: Post-natal linkage of HIV-infected mothers to chronic HIV care and HIV-exposed babies to EID programs was low. Barriers to linkage to HIV care vary in urban and rural settings. We recommend targeted interventions to rapidly improve linkage to

  19. Material properties of oxide dispersion strengthened (ODS) ferritic steels for core materials of FBR. Mechanical strength properties of sodium exposed and Nickel diffused materials. Interim report

    International Nuclear Information System (INIS)

    Kato, Shoichi; Yoshida, Eiichi

    2004-02-01

    An oxide dispersion strengthened (ODS) ferritic steel have excellent resistance to swelling and superior creep strength, they are expected to be used as a long-life cladding material in future advanced fast reactor. In this study, sodium environmental effects on the ODS steel developed by JNC were clarified through tensile test after sodium exposure for maximum 10,000hrs and creep-rupture test in sodium at elevated temperature. The exposure to sodium was conducted using a sodium test loop constituted by austenitic steels. For the conditions of sodium exposure test, the sodium temperatures were 923 K and 973 K, the oxygen concentration in sodium was below 2ppm and sodium flow rate on the surface of specimen was less than 1x10 -4 m/s. Further the specimen with the nickel diffused was prepared, which is simulate to nickel diffusing through sodium from the surface of structural stainless steels. The main results obtained were as follows; (1) The results showed excellent sodium-resistance up to a high temperature of about 973 K in stagnant sodium conditions, and its considered that the effects of sodium environment of tensile properties were negligible. In case of stagnant sodium condition, creep-rupture strength in sodium was equal to the in argon gas, and no sodium environmental effect was observed. The same is true for the creep-rupture ductility. (2) The tensile properties of nickel diffused test specimens at high temperatures simulating microstructure change were equal to that of the thermal aging process specimens. These tensile tests suggest that sodium environmental effects can be ignored. However, the effect of nickel diffusion on creep strength are not clear at present and experimental investigation are being conducted. (3) The coefficient of nickel diffusion in the ODS steel can be estimated based on the results of nickel concentration measurement. This value is larger than that of the diffusion coefficient for typical α-Fe steel at temperature below 973 K

  20. Effects of acamprosate on attentional set-shifting and cellular function in the prefrontal cortex of chronic alcohol-exposed mice

    Science.gov (United States)

    Hu, Wei

    Background: The medial prefrontal cortex (mPFC) inhibits impulsive and compulsive behaviors that characterize drug abuse and dependence. Acamprosate is the leading medication approved for the maintenance of abstinence, shown to reduce craving and relapse in animal models and human alcoholics. Whether acamprosate can modulate executive functions that are impaired by chronic ethanol exposure is unknown. Here we explored the effects of acamprosate on an attentional set-shifting task, and tested whether these behavioral effects are correlated with modulation of glutamatergic synaptic transmission and intrinsic excitability of mPFC neurons. Methods: We induced alcohol dependence in mice via chronic intermittent ethanol (CIE) exposure in vapor chambers and measured changes in alcohol consumption in a limited access 2-bottle choice paradigm. Impairments of executive function were assessed in an attentional set-shifting task. Acamprosate was applied subchronically for 2 days during withdrawal before the final behavioral test. Alcohol-induced changes in cellular function of layer 5/6 pyramidal neurons, and the potential modulation of these changes by acamprosate, were measured using patch clamp recordings in brain slices. Results: Chronic ethanol exposure impaired cognitive flexibility in the attentional set-shifting task. Acamprosate improved overall performance and reduced perseveration. Recordings of mPFC neurons showed that chronic ethanol exposure increased use-dependent presynaptic transmitter release and enhanced postsynaptic N-methyl-D-aspartate receptor (NMDAR) function. Moreover, CIE-treatment lowered input resistance, and decreased the threshold and the afterhyperpolarization (AHP) of action potentials, suggesting chronic ethanol exposure also impacted membrane excitability of mPFC neurons. However, acamprosate treatment did not reverse these ethanol-induced changes cellular function. Conclusion: Acamprosate improved attentional control of ethanol exposed animals

  1. Accuracy of a reformulated fast-set vinyl polysiloxane impression material using dual-arch trays.

    Science.gov (United States)

    Kang, Alex H; Johnson, Glen H; Lepe, Xavier; Wataha, John C

    2009-05-01

    A common technique used for making crown impressions involves use of a vinyl polysiloxane impression material in combination with a dual-arch tray. A leading dental manufacturer has reformulated its vinyl polysiloxane (VPS) impression line, but the accuracy of the new material has not been verified. The purpose of this study was to assess the accuracy of reformulated VPS impression materials using the single-step dual-arch impression technique. Dual-arch impressions were made on a typodont containing a master stainless steel standard crown preparation die, from which gypsum working dies were formed, recovered, and measured. The impression materials evaluated were Imprint 3 Penta Putty with Quick Step Regular Body (IP-0); Imprint 3 Penta Quick Step Heavy Body with Quick Step Light Body (IP-1); Aquasil Ultra Rigid Fast Set with LV Fast Set (AQ-1); and Aquasil Ultra Heavy Fast Set with XLV Fast Set (AQ-2) (n=10). All impressions were disinfected with CaviCide spray for 10 minutes prior to pouring with type IV gypsum. Buccolingual (BL), mesiodistal (MD), and occlusogingival (OG) dimensions were measured and compared to the master die using an optical measuring microscope. Linear dimensional change was also assessed for IP-0 and AQ-1 at 1 and 24 hours based on ANSI/ADA Specification No. 19. Single-factor ANOVA with Dunnett's T3 multiple comparisons was used to compare BL, MD, and OG changes, with hypothesis testing at alpha=.05. A repeated-measures ANOVA was used to compare linear dimensional changes. There were statistical differences among the 4 impression systems for 3 of 4 dimensions of the master die. IP-0 working dies were significantly larger in MD and OG-L dimensions but significantly smaller in the BL dimension. IP-1 working dies were significantly smaller in the BL dimension compared to the master die. With the exception of IP-0, differences detected were small and clinically insignificant. No significant differences were observed for linear dimensional change

  2. Social construction and materiality: the limits of indeterminacy in therapeutic settings.

    Science.gov (United States)

    Lannamann, J W

    1998-01-01

    By drawing parallels between the courtroom testimony of a Christian Science practitioner and an intersession conversation between systemic family therapists, I critique the abstract idealism of language-centered social constructionism. I argue that social constructionist inquiry that highlights the indeterminacy of meaning without a corresponding emphasis on the responsive embodied practices of family members glosses over the material conditions shaping the politics of interaction. The implications of this problem are discussed as they relate to the setting of family therapy, where social construction theory is often used to guide practical interventions.

  3. Randomized controlled clinical trial on the three-dimensional accuracy of fast-set impression materials.

    Science.gov (United States)

    Rudolph, Heike; Quaas, Sebastian; Haim, Manuela; Preißler, Jörg; Walter, Michael H; Koch, Rainer; Luthardt, Ralph G

    2013-06-01

    The use of fast-setting impression materials with different viscosities for the one-stage impression technique demands precise working times when mixing. We examined the effect of varying working time on impression precision in a randomized clinical trial. Focusing on tooth 46, three impressions were made from each of 96 volunteers, using either a polyether (PE: Impregum Penta H/L DuoSoft Quick, 3 M ESPE) or an addition-curing silicone (AS: Aquasil Ultra LV, Dentsply/DeTrey), one with the manufacturer's recommended working time (used as a reference) and two with altered working times. All stages of the impression-taking were subject to randomization. The three-dimensional precision of the non-standard working time impressions was digitally analyzed compared to the reference impression. Statistical analysis was performed using multivariate models. The mean difference in the position of the lower right first molar (vs. the reference impression) ranged from ±12 μm for PE to +19 and -14 μm for AS. Significantly higher mean values (+62 to -40 μm) were found for AS compared to PE (+21 to -26 μm) in the area of the distal adjacent tooth. Fast-set impression materials offer high precision when used for single tooth restorations as part of a one-stage impression technique, even when the working time (mixing plus application of the light- and heavy-body components) diverges significantly from the manufacturer's recommended protocol. Best accuracy was achieved with machine-mixed heavy-body/light-body polyether. Both materials examined met the clinical requirements regarding precision when the teeth were completely syringed with light material.

  4. Interaction of solutions containing phenothiazines exposed to laser radiation with materials surfaces, in view of biomedical applications

    NARCIS (Netherlands)

    Simon, A.; Alexandru, T.; Boni, M.; Damian, V.; Stoicu, A.; Dutschk, Victoria; Pascu, M.L.

    2014-01-01

    Phenothiazine drugs - chlorpromazine (CPZ), promazine (PZ) and promethazine (PMZ) - were exposed to 266 nm (fourth harmonic of the Nd:YAG pulsed laser radiation) in order to be modified at molecular level and to produce an enhancement of their antibacterial activity. The irradiated samples were

  5. Portland cement hydration and early setting of cement stone intended for efficient paving materials

    Science.gov (United States)

    Grishina, A.

    2017-10-01

    Due to the growth of load on automotive roads, modern transportation engineering is in need of efficient paving materials. Runways and most advanced highways require Portland cement concretes. This makes important the studies directed to improvement of binders for such concretes. In the present work some peculiarities of the process of Portland cement hydration and early setting of cement stone with barium hydrosilicate sol were examined. It was found that the admixture of said sol leads to a shift in the induction period to later times without significant change in its duration. The admixture of a modifier with nanoscale barium hydrosilicates increases the degree of hydration of the cement clinker minerals and changes the phase composition of the hydration products; in particular, the content of portlandite and tricalcium silicate decreases, while the amount of ettringite increases. Changes in the hydration processes of Portland cement and early setting of cement stone that are caused by the nanoscale barium hydrosilicates, allow to forecast positive technological effects both at the stage of manufacturing and at the stage of operation. In particular, the formwork age can be reduced, turnover of molds can be increased, formation of secondary ettringite and corrosion of the first type can be eliminated.

  6. PENGEMBANGAN MODUL PEMBELAJARAN KIMIA BERVISI SETS BERORIENTASI CHEMO-ENTREPRENEURSHIP (CEP PADA MATERI LARUTAN ASAM BASA

    Directory of Open Access Journals (Sweden)

    M. Agus Prayitno

    2016-05-01

    Full Text Available Kimia merupakan salah satu mata pelajaran yang berkaitan dengan kehidupan sehari- hari, dari segi lingkungan teknologi, maupun masyarakat. Tujuan penelitian ini adalah menghasilkan modul pembelajaran kimia bervisi SETS berorientasi CEP pada materi larutan asam basa yang layak dan efektif digunakan dalam pembelajaran untuk meningkatkan motivasi belajar, minat wirausaha, dan hasil belajar siswa. Penelitian ini merupakan penelitian pengembangan. Uji coba kelayakan produk pada penelitian ini dilaksanakan di MA Mu’allimin Mu’allimat dengan model penelitian one group pre-test and post-test design dan di MAN Rembang dengan model penelitian pre-test and post-test control group design. Data penelitian diperoleh dengan metode validasi, observasi, dokumentasi, tes, dan skala Likert. Hasil validasi ahli materi, ahli media, dan praktisi menunjukkan bahwa modul pembelajaran kimia bervisi SETS berorientasi CEP sangat layak digunakan dalam pembelajaran kimia dengan skor ratarata pada aspek kegrafikan 95,00, aspek penyajian 95,33, aspek kebahasaan 95,00, dan aspek kegrafikan 94,44. Hasil uji coba modul di MA Mu’allimin Mu’allimat menunjukkan peningkatan motivasi 20%, minat wirausaha 25%, dan hasil belajar siswa 79%. Uji coba modul di MAN Rembang peningkatan motivasi belajar siswa, minat wirausaha, dan hasil belajar siswa kelas eksperimen sebesar 27%, 17% dan 66%, sedangkan peningkatan kelas kontrol secara berturutturut 0,4%, 11%, dan 24%.Chemistryis one of the subjects related to everyday life, in terms of environmental technology, and society. The purpose of this research is to produce visionary chemistry learning modules SETS with CEP oriented on acid-base materials which properly and effectively use in learning to improve learning motivation, entrepreneurial interest, and student learning outcomes. This research is development reaserch. Testing the product viability on the research carried out in MA Mu'allimin Mu'allimat with research model are one

  7. Production of sake from rice material exposed to γ-radiation and technical development for its production. Characterization of low-dose exposed rice and small-scale brewing with it

    International Nuclear Information System (INIS)

    Samuta, Takashi; Aramaki, Isao; Hashizume, Katsumi

    1997-01-01

    The effects of γ-ray radiation have been studied on rice materials for sake production. Previous studies showed that the radiation caused to decrease the viscosity as well as the gelatinization heat of those rice and also decrease the chain length of amylose in its endosperm starch. Therefore, it is possible that a new kind sake with excellent quality might be produced by exposing raw material to radiation at an appropriate dose. Here, it was demonstrated that even a low-dose radiation with γ-ray may change various properties of rice including milling characteristics, water absorbing capacity, digestibility, viscosity etc. However, the characteristics as to fermentation were not affected so much and significant changes were observed only in the degree of coloring of the products. The effects of radiation on the constituents of sake were found to be comparatively small. For the production of matured sake, γ-ray radiation was evaluated to be much effective, because the period of maturation was significantly shortened by using irradiated rice material. Thus, a fragrant matured-like sake could be easily produced from γ-ray radiated rice. There remains a trouble in the coloring of the product. (M.N.)

  8. Electron microscope observations of impact crater debris amongst contaminating particulates on materials surfaces exposed in space in low-Earth orbit

    Science.gov (United States)

    Murr, L. E.; Rivas, J. M.; Quinones, S.; Niou, C.-S.; Advani, A. H.; Marquez, B.

    1993-01-01

    Debris particles extracted from a small sampling region on the leading edge of the Long Duration Exposure Facility (LDEF) spacecraft have been examined by analytical transmission electron microscopy and the elemental frequency observed by energy-dispersive X-ray spectrometry and compared with upper atmosphere (Earth) particle elemental frequency and the average elemental compositions of interplanetary dust particles. A much broader elemental distribution was observed for the exposed spacecraft surface debris milieu. Numerous metal microfragment analyses, particularly aluminum and stainless steel, were compared with scanning electron microscope observations-of impact crater features, and the corresponding elemental spectra on selected LDEF aluminium tray clamps and stainless steel bolts. The compositions and melt features for these impact craters and ejecta have been shown to be consistent with microcrystalline debris fragments in the case of aluminum, and these observations suggest an ever changing debris milieu on exposed surfaces for space craft and space system materials.

  9. Moldable setting time evaluation between sodium alginate and bovine gelatine of glutinous rice mixture as dental putty materials

    Science.gov (United States)

    Takarini, V.; Hasratiningsih, Z.; Karlina, E.; Febrida, R.; Asri, L. A. T. W.; Purwasasmita, BS

    2017-02-01

    Putty elastomeric material is a viscous, moldable material that can be used as a dental impression to record and duplicate the tooth structure. Commercially available putty materials are hardly found in the Indonesian market. The aim of this work is to develop an alternative putty dental material from glutinous rice with two different gelling agents; sodium alginate and bovine gelatine. A commercially putty material was used as a control. The length of time required for the putty materials to set (setting time) was evaluated with compression set test. The result showed that sodium alginate and bovine gelatine gelling agents resulted in moldable putty materials that comparable to the commercial product. Glutinous rice mixed with sodium alginate gelling agent demonstrated longer setting time (more than 1 hours) compared to bovine gelatine (6 minutes). These may occur due to heat treatment applied to the bovine gelatine, while sodium alginate mixture has a chemical reaction since CaCl2 crosslink agent had been added to the mixture. Glutinous rice with bovine gelatine mixture is a promising candidate to be used as a dental putty material.

  10. Compromise solution in the problem of change state control for the material body exposed to the external medium

    Science.gov (United States)

    Malafeyev, O. A.; Redinskikh, N. D.

    2018-05-01

    The problem of finding optimal temperature control of the material body state under the unknown in advance parameters of the external medium is formalized and studied in this paper. The problems of this type arise frequently in the real life. An optimal thermal regime is necessary to apply at the soil thawing or freezing, drying the building materials, heating the concrete to obtain the required strength, and so on. Problems of such type one can analyze making use the apparatus and methods of game theory. For describing the influence of external medium on the characteristics of different materials we make use the many-step two person zero-sum game in this paper. The compromise solution is taken as the optimality principle. The numerical example is given.

  11. Deliberate Practice of Creativity Training Set Series - A Creativity Training Material for Education (work in progress)

    DEFF Research Database (Denmark)

    Byrge, Christian

    2018-01-01

    Five training sets including 450 unique thinking direction cards and 120 exercise cards. Designed for Educational Purposes.......Five training sets including 450 unique thinking direction cards and 120 exercise cards. Designed for Educational Purposes....

  12. Injectable calcium sulfate/mineralized collagen-based bone repair materials with regulable self-setting properties.

    Science.gov (United States)

    Chen, Zonggang; Liu, Huanye; Liu, Xi; Cui, Fu-Zhai

    2011-12-15

    An injectable and self-setting bone repair materials (nano-hydroxyapatite/collagen/calcium sulfate hemihydrate, nHAC/CSH) was developed in this study. The nano-hydroxyapatite/collagen (nHAC) composite, which is the mineralized fibril by self-assembly of nano-hydrocyapatite and collagen, has the same features as natural bone in both main hierarchical microstructure and composition. It is a bioactive osteoconductor due to its high level of biocompatibility and appropriate degradation rate. However, this material lacks handling characteristics because of its particle or solid-preformed block shape. Herein, calcium sulfate hemihydrate (CSH) was introduced into nHAC to prepare an injectable and self-setting in situ bone repair materials. The morphology of materials was observed using SEM. Most important and interesting of all, calcium sulfate dihydrate (CSD), which is not only the reactant of preparing CSH but also the final solidified product of CSH, was introduced into nHAC as setting accelerator to regulate self-setting properties of injectable nHAC/CSH composite, and thus the self-setting time of nHAC/CSH composite can be regulated from more than 100 min to about 30 min and even less than 20 min by adding various amount of setting accelerator. The compressive properties of bone graft substitute after final setting are similar to those of cancellous bone. CSD as an excellent setting accelerator has no significant effect on the mechanical property and degradability of bone repair materials. In vitro biocompatibility and in vivo histology studies demonstrated that the nHAC/CSH composite could provide more adequate stimulus for cell adhesion and proliferation, embodying favorable cell biocompatibility and a strong ability to accelerate bone formation. It can offer a satisfactory biological environment for growing new bone in the implants and for stimulating bone formation. Copyright © 2011 Wiley Periodicals, Inc.

  13. Characterization of full set material constants of piezoelectric materials based on ultrasonic method and inverse impedance spectroscopy using only one sample.

    Science.gov (United States)

    Li, Shiyang; Zheng, Limei; Jiang, Wenhua; Sahul, Raffi; Gopalan, Venkatraman; Cao, Wenwu

    2013-09-14

    The most difficult task in the characterization of complete set material properties for piezoelectric materials is self-consistency. Because there are many independent elastic, dielectric, and piezoelectric constants, several samples are needed to obtain the full set constants. Property variation from sample to sample often makes the obtained data set lack of self-consistency. Here, we present a method, based on pulse-echo ultrasound and inverse impedance spectroscopy, to precisely determine the full set physical properties of piezoelectric materials using only one small sample, which eliminated the sample to sample variation problem to guarantee self-consistency. The method has been applied to characterize the [001] C poled Mn modified 0.27Pb(In 1/2 Nb 1/2 )O 3 -0.46Pb(Mg 1/3 Nb 2/3 )O 3 -0.27PbTiO 3 single crystal and the validity of the measured data is confirmed by a previously established method. For the inverse calculations using impedance spectrum, the stability of reconstructed results is analyzed by fluctuation analysis of input data. In contrast to conventional regression methods, our method here takes the full advantage of both ultrasonic and inverse impedance spectroscopy methods to extract all constants from only one small sample. The method provides a powerful tool for assisting novel piezoelectric materials of small size and for generating needed input data sets for device designs using finite element simulations.

  14. Finite Element Modeling of Material Fatigue and Cracking Problems for Steam Power System HP Devices Exposed to Thermal Shocks

    Directory of Open Access Journals (Sweden)

    Pawlicki Jakub

    2016-09-01

    Full Text Available The paper presents a detailed analysis of the material damaging process due to low-cycle fatigue and subsequent crack growth under thermal shocks and high pressure. Finite Element Method (FEM model of a high pressure (HP by-pass valve body and a steam turbine rotor shaft (used in a coal power plant is presented. The main damaging factor in both cases is fatigue due to cycles of rapid temperature changes. The crack initiation, occurring at a relatively low number of load cycles, depends on alternating or alternating-incremental changes in plastic strains. The crack propagation is determined by the classic fracture mechanics, based on finite element models and the most dangerous case of brittle fracture. This example shows the adaptation of the structure to work in the ultimate conditions of high pressure, thermal shocks and cracking.

  15. How We Used NASA Lunar Set in Planetary Material Science Analog Studies on Lunar Basalts and Breccias with Industrial Materials of Steels and Ceramics

    Science.gov (United States)

    Berczi, S.; Cech, V.; Jozsa, S.; Szakmany, G.; Fabriczy, A.; Foldi, T.; Varga, T.

    2005-01-01

    Analog studies play important role in space materials education. Various aspects of analogies are used in our courses. In this year two main rock types of NASA Lunar Set were used in analog studies in respect of processes and textures with selected industrial material samples. For breccias and basalts on the lunar side, ceramics and steels were found as analogs on the industrial side. Their processing steps were identified on the basis of their textures both in lunar and in industrial groups of materials.

  16. Correlating activity incorporation with properties of oxide films formed on material samples exposed to BWR and PWR coolants in Finnish nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Bojinov, M.; Kinnunen, P.; Laitinen, T.; Maekelae, K.; Saario, T.; Sirkiae, P. [VTT Industrial Systems, Espoo (Finland); Buddas, T.; Halin, M.; Kvarnstroem, R.; Tompuri, K. [Fortum Power and Heat Oy, Loviisa Power Plant, Loviisa (Finland); Helin, M.; Muttilainen, E.; Reinvall, A. [Teollisuuden Voima Oy, Olkiluoto (Finland)

    2002-07-01

    The extent of activity incorporation on primary circuit surfaces in nuclear power plants is connected to the chemical composition of the coolant, to the corrosion behaviour of the material surfaces and to the structure and properties of oxide films formed on circuit surfaces due to corrosion. Possible changes in operational conditions may induce changes in the structure of the oxide films and thus in the rate of activity incorporation. To predict these changes, experimental correlations between water chemistry, oxide films and activity incorporation, as well as mechanistic understanding of the related phenomena need to be established. In order to do this, flow-through cells with material samples and facilities for high-temperature water chemistry monitoring have been installed at Olkiluoto unit 1 (BWR) and Loviisa unit 1 (PWR) in spring 2000. The cells are being used for two major purposes: To observe the changes in the structure and activity levels of oxide films formed on material samples exposed to the primary coolant. Correlating these observations with the abundant chemical and radiochemical data on coolant composition, dose rates etc. collected routinely by the plant, as well as with high-temperature water chemistry monitoring data such as the corrosion potentials of relevant material samples, the redox potential and the high-temperature conductivity of the primary coolant. We describe in this paper the scope of the work, give examples of the observations made and summarize the results on oxide films that have been obtained during one full fuel cycle at both plants. (authors)

  17. Military Curriculum Materials for Vocational and Technical Education. Builders School, Ceramic Tile Setting 3-9.

    Science.gov (United States)

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This course, for individualized or group instruction on ceramic tile setting, was developed from military sources for use in vocational education. The course provides students with skills in mortar preparation, surface preparation, tile layout planning, tile setting, tile cutting, and the grouting of tile joints. Both theory and shop assignments…

  18. Hierarchical Li1.2 Ni0.2 Mn0.6 O2 nanoplates with exposed {010} planes as high-performance cathode material for lithium-ion batteries.

    Science.gov (United States)

    Chen, Lai; Su, Yuefeng; Chen, Shi; Li, Ning; Bao, Liying; Li, Weikang; Wang, Zhao; Wang, Meng; Wu, Feng

    2014-10-22

    Hierarchical Li1.2 Ni0.2 Mn0.6 O2 nanoplates with exposed {010} planes are designed and synthesized. In combination with the advantages from the hierarchical archi-tecture and the exposed electrochemically active {010} planes of layered materials, this material satisfies both efficient ion and electron transport and thus shows superior rate capability and excellent cycling stability. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Performance of fast-setting impression materials in the reproduction of subgingival tooth surfaces without soft tissue retraction.

    Science.gov (United States)

    Rudolph, Heike; Röhl, Andreas; Walter, Michael H; Luthardt, Ralph G; Quaas, Sebastian

    2014-01-01

    Fast-setting impression materials may be prone to inaccuracies due to accidental divergence from the recommended mixing protocol. This prospective randomized clinical trial aimed to assess three-dimensional (3D) deviations in the reproduction of subgingival tooth surfaces and to determine the effect of either following or purposely diverging from the recommended mixing procedure for a fast-setting addition-curing silicone (AS) and fast-setting polyether (PE). After three impressions each were taken from 96 participants, sawcut gypsum casts were fabricated with a standardized procedure and then optically digitized. Data were assessed with a computer-aided 3D analysis. For AS impressions, multivariate analysis of variance revealed a significant influence of the individual tooth and the degree to which the recommended mixing protocol was violated. For PE impressions, the ambient air temperature and individual tooth showed significant effects, while divergence from the recommended mixing protocol was not of significance. The fast-setting PE material was not affected by changes in the recommended mixing protocol. For the two fast-setting materials examined, no divergences from the recommended mixing protocol of less than 2 minutes led to failures in the reproduction of the subgingival tooth surfaces.

  20. Relationship between concentrations of microbiological agents in the air of agricultural settings and occurrence of work-related symptoms in exposed persons

    Directory of Open Access Journals (Sweden)

    Barbara Mackiewicz

    2015-09-01

    related symptoms and the concentration of total airborne microorganisms (R=0.748555; P=0.020317, mesophilic bacteria (R=0.7573; P=0.029548, Gram-negative bacteria (R=0.835938; P=0.019129, and endotoxins (R=0.705356; P=0.03378. The correlations between the concentrations of thermophilic actinomycetes and fungi, on one side, and frequency of work-related symptoms on the other, did not attain the threshold of significance (P=0.087049 and P=0.062963, respectively. Results of the meta-analysis confirm harmful health effects of the total airborne microorganisms, total airborne mesophilic bacteria, airborne Gram-negative bacteria, and airborne bacterial endotoxin on the occupationally-exposed agricultural workers, and indicate a need for the establishment of internationally recognized occupational exposure limits for these microbial agents.

  1. Setting of loose-fill insulation materials in walls; Saetningsfri indblaesning af loesfyldsisolering i vaegge

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, T.V.

    2001-07-01

    The report describes material behaviour, which significantly influences the settling of loose-fill insulation materials. The specific application presented here is loose-fill insulation material injected in walls as thermal insulation. The physical formulation of the issue to be discussed is that the mass is kept in position in the cavity by frictional forces, which counteracts the settling but complicates injection. The purpose of this study is to investigate whether there is a possibility that decreased friction will be able to release settling. Cellulose loose-fill material injected in a 0.1 m thick and 1 m wide gypsum wall with a minimum density of 48 kg/m3 was found not to settle if kept at a constant relative humidity, RH 50 %. A minimum density of 53 kg/m3 is necessary if the thickness of the wall is increased from 0.1 m to 0.3 m. If changing the constant environment from RH 50 % to RH 80 % a minimum density of 63 kg/m3 is necessary. Furthermore, results so far show that cellulose loose-fill material spread on the attic floor will have a density after settling of 48 kg /M3 for a constant RH 50 %, corresponding to 43 kg/m3 dry material. The results were found by using a model and tests. (au)

  2. Changes in setting time of alginate impression material with different water temperature

    Directory of Open Access Journals (Sweden)

    Decky J. Indrani

    2013-03-01

    Full Text Available Background: Previous studies showed that setting process of alginates can be influenced by temperature. Purpose: To determine the changes in setting time due to differences in water temperature and to determine the correlation between water temperature and the setting time. Methods: Seven groups of dough alginate were prepared by mixing alginate powder and water, each using a temperature between 13° C–28° C with a interval of 2.5° C. A sample mold (Θ = 30 mm, t = 16 mm was placed on a flat plate and filled with doug alginate. Immediately the flat end of a polished acrylic rod was placed in contact with the surface of dough alginate. Setting time of alginat was measured from the starting of the mix to the time when the alginate does not adhere to the end of the rod. Setting time alginate data were analyzed using one way ANOVA, LSD and Pearson. Results: Setting time of alginate with water temperature between 13° C–28° C were 87 to 119.4 seconds and were significantly different (p < 0.01. The setting time between group were also significantly different (p<0.01. There was an inverse correlation between water temperature and the setting time (r = -0.968. Conclusion: Water temperature between 13° C–28°C with a difference of 2.5° C produced significant differences in alginate setting time; the lower the water temperature being used the longer the setting time was produced.Latar belakang: Penelitian-penelitian sebelumnya menunjukkan bahwa proses pengerasan alginat dapat dipengaruhi oleh suhu. Tujuan: Mengetahui perubahan waktu pengerasan alginat akibat perbedaan suhu air serta mengetahui hubungan antara suhu air dan waktu pengerasan. Metode: Tujuh kelompok adonan alginat yang dipersiapkan dengan mencampur bubuk alginat dan air, masingmasing menggunakan suhu antara 13°C–28° C dengan interval 2,5° C. Pengukuran waktu pengerasan alginat dilakukan sesuai dengan spesifikasi ADA no.18. Sebuah cetakan sampel terbuat dari pralon berbentuk

  3. Physical Settings and Materials Recommended for Play Therapy with Japanese Children

    Science.gov (United States)

    Ji, Yuanhong; Ramirez, Sylvia Z.; Kranz, Peter L.

    2008-01-01

    This article describes a number of important issues to consider in play therapy with Japanese children. They include the waiting room and playroom decor, toys, and other materials, as well as terminology that are commonly used in Japan. The layout of the small and large playrooms, use of the "Wa-Shitsu" (a traditional Japanese room…

  4. A statistical method for predicting sound absorbing property of porous metal materials by using quartet structure generation set

    International Nuclear Information System (INIS)

    Guan, Dong; Wu, Jiu Hui; Jing, Li

    2015-01-01

    Highlights: • A random internal morphology and structure generation-growth method, termed as the quartet structure generation set (QSGS), has been utilized based on the stochastic cluster growth theory for numerical generating the various microstructures of porous metal materials. • Effects of different parameters such as thickness and porosity on sound absorption performance of the generated structures are studied by the present method, and the obtained results are validated by an empirical model as well. • This method could be utilized to guide the design and fabrication of the sound-absorption porous metal materials. - Abstract: In this paper, a statistical method for predicting sound absorption properties of porous metal materials is presented. To reflect the stochastic distribution characteristics of the porous metal materials, a random internal morphology and structure generation-growth method, termed as the quartet structure generation set (QSGS), has been utilized based on the stochastic cluster growth theory for numerical generating the various microstructures of porous metal materials. Then by using the transfer-function approach along with the QSGS tool, we investigate the sound absorbing performance of porous metal materials with complex stochastic geometries. The statistical method has been validated by the good agreement among the numerical results for metal rubber from this method and a previous empirical model and the corresponding experimental data. Furthermore, the effects of different parameters such as thickness and porosity on sound absorption performance of the generated structures are studied by the present method, and the obtained results are validated by an empirical model as well. Therefore, the present method is a reliable and robust method for predicting the sound absorption performance of porous metal materials, and could be utilized to guide the design and fabrication of the sound-absorption porous metal materials

  5. Penerapan Pendekatan Reciprocal Teaching dalam Setting Pembelajaran Kooperatif Materi Sistem Persamaan Linear Tiga Variabel

    OpenAIRE

    Dewi, Wahyu Tiara

    2017-01-01

    This research aims to determine the effectiveness of mathematics learning with reciprocal teaching approach in the setting of cooperative learning. The subject matter is system of linear equations of three variables grade X IPS-1 MAN 2 Pontianak. Three aspects of learning effectiveness used are the teacher's ability to manage learning, the student activity learning, and the student learning outcomes. The research method used is descriptive method. The form of research used is pre-experiment w...

  6. Geologic setting of diverse volcanic materials in northern Elysium Planitia, Mars

    International Nuclear Information System (INIS)

    Mouginis-Mark, P.J.

    1990-01-01

    Geologic mapping of high-resolution (30-50 m/pixel) Viking Orbiter images of northern Elysium Planitia has identified seven sites where current problems in martian volcanology, chronology, and stratigraphy can be resolved. These sites, which are discussed in the context of a potential Mars rover/sample return mission, would permit the following investigations: (1) the dating of Lower Amazonian lava flows from Elysium Mons (thereby providing absolute calibration for global crater size/frequency relative chronologies), (2) the petrologic investigation of long run-out lava flows, (3) the geologic interpretation of materials that may either be lava flows or lahar deposits, (4) the analysis of materials believed to be ash deposits produced by explosive eruptions of Hecates Tholus, and (5) the investigation of the stratigraphy of fractured terrain along the boundary between northern Elysium Planitia and southern Utopia Planitia. 63 refs

  7. How firms set prices for medical materials: a multi-country study.

    Science.gov (United States)

    Ide, Hiroo; Mollahaliloglu, Salih

    2009-09-01

    This study presents a comparison of medical material prices, discusses why differences exist, and examines methods for comparing prices. Market prices for drug-eluting stents (DES), non-drug-eluting stents (non-DES), and percutaneous transluminal coronary angioplasty (PTCA) catheters were collected from five countries: the United States, Japan, Korea, Turkey, and Thailand. To compare prices, three adjustment methods were used: currency exchange rates, purchasing power parity (PPP), and gross domestic product (GDP) per capita. The ratios of medical material prices compared with those in the United States were higher in Japan (from 1.4 for DES to 5.0 for PTCA catheters) and Korea (from 1.2 for DES to 4.0 for PTCA catheters), and lower in Turkey (from 0.8 for non-DES to 1.4 for DES) and Thailand (from 0.5 for non-DES to 1.3 for PTCA catheters). The PPP-adjusted ratios changed slightly for Japan, Korea, and Turkey. When the prices were adjusted by GDP per capita, the ratios were much higher. Comparing prices using currency exchange rates or PPP is applicable only between countries with stable economic relations; adjustment by GDP per capita reflects the actual burden. Further study is needed to fully elucidate the factors influencing the global medical material market.

  8. In vivo micronucleus studies with 6 titanium dioxide materials (3 pigment-grade & 3 nanoscale) in orally-exposed rats.

    Science.gov (United States)

    Donner, E M; Myhre, A; Brown, S C; Boatman, R; Warheit, D B

    2016-02-01

    Six pigment-grade (pg) or ultrafine (uf)/nanoscale (anatase and/or rutile) titanium dioxide (TiO2) particulates were evaluated for in vivo genotoxicity (OECD 474 Guidelines) in male and female rats by two different laboratories. All test materials were robustly characterized. The BET surface areas of the pg and uf samples ranged from 7 to 17 m(2)/g and 50 to 82 m(2)/g respectively. The materials were assessed for induction of micronuclei and toxicity in bone marrow by analyzing peripheral blood reticulocytes (RETs) by flow cytometry. Single oral gavage doses of 500, 1000 or 2000 mg/kg body weight (bw) of each material were implemented with concurrent negative (water) and positive controls (cyclophosphamide). Approximately 48 and 72 h after exposure, blood samples were collected and 20,000 RETs per animal were analyzed. For each of the six tests, there were no biologically or toxicologically relevant increases in the micronucleated RET frequency in any TiO2 exposed group at either time point at any dose level. In addition, there were a lack of biologically relevant decreases in %RETs among total erythrocytes. All six TiO2 test substances were negative for in vivo genotoxicity effects; however, it is noted that the exposure to target tissues was likely negligible. One pigment grade and one ultrafine material each were evaluated for potential systemic exposure/uptake from the gastrointestinal tract by analysis of TiO2 into blood and liver. No significant increases in TiO2 over controls were measured in blood (48 or 72 h) or liver (72 h) following exposures to 2000 mg/kg bw TiO2. These data indicate that there was no absorption of the test material from the gastrointestinal tract into the blood circulation and the lack of genotoxic effects is therefore attributed to a lack of exposure due to the inability of the test material to migrate from the gastrointestinal tract into the blood and then into target tissues. Copyright © 2015 Elsevier Inc. All rights

  9. Identifying and intervening with substance-using women exposed to intimate partner violence: phenomenology, comorbidities, and integrated approaches within primary care and other agency settings.

    Science.gov (United States)

    Weaver, Terri L; Gilbert, Louisa; El-Bassel, Nabila; Resnick, Heidi S; Noursi, Samia

    2015-01-01

    Substance use and/or disorders (SUDs) have been identified as a significant correlate of intimate partner violence (IPV) exposure and present complex issues that intersect with the topography of IPV, attendant mental health, and physical co-morbidities and may pose barriers to primary care- and other agency-based screening and intervention efforts. Despite substantial research indicating significantly higher rates of all types and severity of IPV victimization among women with SUDs and bidirectional associations between partner or self-use of drugs or alcohol and IPV victimization, effective screening, brief interventions, coordinated systems of care, and treatment approaches to address these co-occurring problems remain very limited. We integrated select research examining the intersection of IPV victimization and SUDs and several comorbidities that have significant public health impact and provided recommendations for scaling up targeted interventions to redress these co-occurring problems among women in primary, emergency, and other care settings.

  10. Set of Activities Addressed for Elementary School Students: Cells and the Genetic Material

    Directory of Open Access Journals (Sweden)

    E.M. Miranda

    2005-07-01

    Full Text Available The time lag between the progresses in the area of molecular biology reached in the last years and the schools science curricula  can be reduced through  initiatives of the university  regarding  the dissemina- tion of sciences. Inside of this context, one of the major objectives of the CBME has been the scientific education  and  dissemination on Molecular  Biosciences.  Among the  strategies organized  to promote the dissemination of this area, the Scientific Dissemination Coordination of CBME developed a set of playful activities  for students from public and private  elementary schools (7th  and 8th grades.  As a first step science teachers were interviewed  in order to indicate  which topics related  to molecular bio- sciences they  usually  include in their curricula  planning.  The approach  considered  in the elaboration of the set of activities  was the construction of knowledge of the concepts related  to topics as cell types, their  structures and  organelles,  and  the  importance of the  nucleus and  DNA. The set was offered to170 students. Students from private  schools were evaluated by their  performance  through  the classes, which were registered  by the  notes  of the  instructors.  Students from public  schools were evaluated through  questionnaires containing  basic  concepts  on the  theme  applied  before (pre-test and  after (post-test the set of activities  in order to measure,  respectively,  the previous and acquired knowledge. The  programming accomplished  at  the  public  school was partially modified  due  to  the  absence  of a laboratory, microscopes  and  a room  of computers, without, however,  to  alter  the  objectives  and content of the  activities.   The  comparative analysis  of the  pre- and  post-tests revealed  that, in this latter, there  was an increase of the average percentage  of correct  answers and an

  11. PENERAPAN PEMBELAJARAN SAINS DENGAN PENDEKATAN SETS PADA MATERI CAHAYA UNTUK MENINGKATKAN HASIL BELAJAR SISWA KELAS V SD

    Directory of Open Access Journals (Sweden)

    Z. Ragil

    2012-02-01

    Full Text Available Penelitian ini dilatarbelakangi oleh nilai rata-rata dan presentase ketuntasan klasikal siswa yang masih rendah pada matapelajaran sains di SD. Untuk mengatasi permasalahan tersebut, diterapkan pembelajaran sains dengan pendekatan SETS(Science, Environment, Technology, Society. SETS adalah visi atau pendekatan pembelajaran yang memiliki fokus utamamemberikan pengalaman penyelidikan pada siswa untuk mendapatkan pengetahuan yang berkaitan dengan sains, lingkungan,teknologi, dan masyarakat serta kesalingketerkaitannya. Penelitian ini bertujuan untuk mendeskripsikan pembelajaran sainsdengan pendekatan SETS yang diterapkan, dan mengetahui peningkatan hasil belajar. Data penelitian berupa hasil belajar kognitifdiperoleh dari test, hasil belajar afektif dan psikomotorik diperoleh dari lembar observasi, untuk mengetahui peningkatan hasilbelajar siswa secara keseluruhan digunakan dalam penelitian ini adalah uji gain. Hasil analisis data menunjukkan adanyapeningkatan hasil belajar kognitif, afektif dan psikomotorik. Dari hasil analisis tersebut dapat disimpulkan bahwa penerapanpembelajaran sains dengan pendekatan SETS dapat meningkatkan hasil belajar siswa. This research was carried out with the background of low average mark and classical mastery percentage of science subject ofelementary school student. With the purpose of the research of describing science lesson with SETS approach to increase learningachievement, the researcher applies SETS approach in the lesson of light material. The data of cognitive learning achievement isfound by using test, while the affective and psychomotor ones are taken from observation sheets. In order to examine the overalllearning achievement, this study uses gain test. The data analysis shows that there is an improvement of cognitive, affective andpsychomotor learning achievements of student after having the lesson. It is concluded that the application of science lesson withSETS approach can increase the students

  12. The structure and material composition of ossified aortic valves identified using a set of scientific methods

    Science.gov (United States)

    Zeman, Antonín; Šmíd, Michal; Havelcová, Martina; Coufalová, Lucie; Kučková, Štěpánka; Velčovská, Martina; Hynek, Radovan

    2013-11-01

    Degenerative aortic stenosis has become a common and dangerous disease in recent decades. This disease leads to the mineralization of aortic valves, their gradual thickening and loss of functionality. We studied the detailed assessment of the proportion and composition of inorganic and organic components in the ossified aortic valve, using a set of analytical methods applied in science: polarized light microscopy, scanning electron microscopy, X-ray fluorescence, X-ray diffraction, gas chromatography/mass spectrometry and liquid chromatography-tandem mass spectrometry. The sample valves showed the occurrence of phosphorus and calcium in the form of phosphate and calcium carbonate, hydroxyapatite, fluorapatite and hydroxy-fluorapatite, with varying content of inorganic components from 65 to 90 wt%, and with phased development of degenerative disability. The outer layers of the plaque contained an organic component with peptide bonds, fatty acids, proteins and cholesterol. The results show a correlation between the formation of fluorapatite in aortic valves and in other parts of the human bodies, associated with the formation of bones.

  13. Radiation impact on the characteristics of optical glasses test results on a selected set of materials

    Science.gov (United States)

    Fruit, Michel; Gussarov, Andrei; Berghmans, Francis; Doyle, Dominic; Ulbrich, Gerd

    2017-11-01

    It is well known within the Space optics community that radiation may significantly affect transmittance of glasses. To overcome this drawback, glass manufacturers have developed Cerium doped counterparts of classical glasses. This doped glasses display much less transmittance sensitivity to radiation. Still, the impact of radiation on refractive index is less known and may affect indifferently classical or Cerium doped glasses. ESTEC has initialised an R&D program with the aim of establishing a comprehensive data base gathering radiation sensitivity data, called Dose coefficients, for all the glass optical parameters (transmittance / refractive index / compaction……). The first part of this study, to define the methodology for such a data base, is run by ASTRIUM SAS in co-operation with SCK CEN. This covers theoretical studies associated to testing of a selected set of classical and "radiation hardened" glasses. It is proposed here to present first the theoretical backgrounds of this study and then to give results which have been obtained so far.

  14. JSD1000: multi-group cross section sets for shielding materials

    International Nuclear Information System (INIS)

    Yamano, Naoki

    1984-03-01

    A multi-group cross section library for shielding safety analysis has been produced by using ENDF/B-IV. The library consists of ultra-fine group cross sections, fine-group cross sections, secondary gamma-ray production cross sections and effective macroscopic cross sections for typical shielding materials. Temperature dependent data at 300, 560 and 900 K have been also provided. Angular distributions of the group to group transfer cross section are defined by a new method of ''Direct Angular Representation'' (DAR) instead of the method of finite Legendre expansion. The library designated JSD1000 are stored in a direct access data base named DATA-POOL and data manipulations are available by using the DATA-POOL access package. The 3824 neutron group data of the ultra-fine group cross sections and the 100 neutron, 20 photon group cross sections are applicable to shielding safety analyses of nuclear facilities. This report provides detailed specifications and the access method for the JSD1000 library. (author)

  15. Fire exposed aluminium structures

    NARCIS (Netherlands)

    Maljaars, J.; Fellinger, J.E.J.; Soetens, F.

    2005-01-01

    Material properties and mechanical response models for fire design of steel structures are based on extensive research and experience. Contrarily, the behaviour of aluminium load bearing structures exposed to fire is relatively unexplored. This article gives an overview of physical and mechanical

  16. The Setting Time of Polyether Impression Materials after Contact with Conventional and Experimental Gingival Margin Displacement Agents.

    Science.gov (United States)

    Nowakowska, Danuta; Raszewski, Zbigniew; Ziętek, Marek; Saczko, Jolanta; Kulbacka, Julita; Więckiewicz, Włodzimierz

    2018-02-01

    The compatibility of chemical gingival margin displacement agents with polyether impression materials has not been determined. The aim of this study was to evaluate the setting time of polyether impression elastomers after contact with conventional and experimental gingival displacement agents. The study compared the setting time of two polyether impression materials: medium body (Impregum Penta Soft) and light body (Impregum Garant L DuoSoft) after contact with 10 gingival displacement agents, including 5 conventional astringents (10%, 20%, and 25% aluminum chloride, 25% aluminum sulfate, and 15.5% ferric sulfate) and 5 experimental adrenergics (0.1% and 0.01% HCl-epinephrine, 0.05% HCl-tetrahydrozoline, 0.05% HCl-oxymetazoline, and 10% HCl-phenylephrine). As many as 120 specimens (60 light body and 60 medium body) were mixed with 20 μl of each of 10 gingival displacement agents, and the time to achieve maximum viscosity was measured with a viscometer. The setting times of these specimens were compared with the control group of 12 specimens, which were polymerized without contact with the displacement agents. The experiments were performed in two environments: 23°C and 37°C (± 0.1°C). Individual and average polymerization time compatibility indices (PTCI) were calculated. Data were analyzed by 2-way ANOVA (α = 0.05). The evaluated chemical displacement agents from both groups changed the setting time of light- and medium-body PE. The negative individual PTCI values achieved astringent (20% aluminum chloride) with two PE in both temperature environments. The average PTCI values of the experimental displacement agents at laboratory and intraoral temperatures were significantly higher than the conventional agents. The present findings suggest that experimental retraction agents can be recommended clinically as gingival margin displacement agents with minimal effects on the setting time of medium- and light-body polyether impression materials; however, direct

  17. Progress in mass spectrometry for the analysis of set-off phenomena in plastic food packaging materials.

    Science.gov (United States)

    Aznar, Margarita; Alfaro, Pilar; Nerín, Cristina; Jones, Emrys; Riches, Eleanor

    2016-07-01

    In most cases, food packaging materials contain inks whose components can migrate to food by diffusion through the material as well as by set-off phenomena. In this work, different mass spectrometry approaches had been used in order to identify and confirm the presence of ink components in ethanol (95%) and Tenax(®) as food simulants. Three different sets of materials, manufactured with different printing technologies and with different structures, were analyzed. Sample analysis by ultra performance liquid chromatography mass spectrometry (UPLC-MS), using a quadrupole-time of flight (Q-TOF) as a mass analyser proved to be an excellent tool for identification purposes while ion mobility mass spectrometry (IM-MS) shown to be very useful for the confirmation of the candidates proposed. The results showed the presence of different non-volatile ink components in migration such as colorants (Solvent Red 49), plasticizers (dimethyl sebacate, tributyl o-acetyl citrate) or surfactants (SchercodineM, triethylene glycol caprilate). An oxidation product of an ink additive (triphenyl phosphine oxide) was also detected. In addition, a surface analysis technique, desorption electrospray mass spectrometry (DESI-MS), was used for analyzing the distribution of some ink components (tributyl o-acetyl citrate Schercodine L, phthalates) in the material. The detection of some of these compounds in the back-printed side confirmed the transference of this compound from the non-food to the food contact side. The results also showed that concentration of ink migrants decreased when an aluminum or polypropylene layer covered the ink. When aluminum was used, concentration of most of ink migrants decreased, and for 5 out of the 9 even disappeared. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Exposing diversity

    DEFF Research Database (Denmark)

    Nørtoft, Kamilla; Nordentoft, Helle Merete

    professionals´ meetings with patients and relatives. In the paper we draw data from focus group discussions with interdisciplinary groups of health care professionals working in the area of care for older people. The video narratives used to initiate discussions are developed through ethnographic fieldwork...... in the homes of older people and in pedagogical institutions targeting older people. In the paper we look at the potentials and challenges in working with ethnographic video narratives as a pedagogical tool. Our findings indicate that the use of video narratives has the potential to expose the diversity...... focus on their own professional discipline and its tasks 2) stimulates collaborative learning when they discuss their different interpretations of the ethnographic video narratives and achieve a deeper understanding of each other’s work and their clients’ lifeworlds, which might lead to a better...

  19. Fabrication of 1m x 1m readout strips panel and quality verification of new set of SFS dielectric material

    International Nuclear Information System (INIS)

    Kumar, A.; Pandey, A.; Sogarwal, Hariom; Marimuthu, N.; Singh, V.; Subrahmanyam, V.S.

    2016-01-01

    India based Neutrino Observatory (INO) is going to use ∼ 30,000 Resistive Plate Chamber (RPC) as an active detector. Resistive Plate chambers are parallel plate fast gaseous detector made up of high resistivity (10"1"2 ohm) of glass or bakelite. Glass plates work as electrodes of positive and negative potential. When a charged particle passes through chamber it ionizes the gas and charge move towards opposite electrodes. The pick-up panels pick these signals. Signals are sent to front end electronics. The characteristic impedance of the strips of the panels should be matched with front end electronics which helps in minimizing the reflected signal. Since INO is an underground laboratory, all material used in it must be fireproof. Since ∼ 60,000 pick-up panels are going to be used in INO hence it should be cheaper also. We recently received a new set of Silicon Fiber Sheets - a dielectric material, of 25 pieces of 1m x 0.5m having thickness 05 mm. We fabricated a set of readout strips panel of dimension 1m x 1m. We will present this work in detail

  20. Double perovskites overtaking the single perovskites: A set of new solar harvesting materials with much higher stability and efficiency

    Science.gov (United States)

    Kangsabanik, Jiban; Sugathan, Vipinraj; Yadav, Anuradha; Yella, Aswani; Alam, Aftab

    2018-05-01

    Solar energy plays an important role in substituting the ever declining source of fossil fuel energy. Finding novel materials for solar cell applications is an integral part of photovoltaic research. Hybrid lead halide perovskites are one of, if not the most, well sought material in the photovoltaic research community. Its unique intrinsic properties, flexible synthesis techniques, and device fabrication architecture made the community highly buoyant over the past few years. Yet, there are two fundamental issues that still remain a concern, i.e., the stability in external environment and the toxicity due to Pb. This led to a search for alternative materials. More recently, double perovskite [A2B B'X6 (X =Cl, Br, I)] materials have emerged as a promising choice. Few experimental synthesis and high throughput computational studies have been carried out to check for promising candidates of this class. The main outcome from these studies, however, can essentially be summarized into two categories: (i) either they have an indirect band gap or (ii) a direct but large optical band gap, which is not suitable for solar devices. Here we propose a large set of stable double perovskite materials, Cs2B B 'X6 (X =Cl, Br, I), which show indirect to direct band gap transition via small Pb+2 doping at both B and B'sites. This is done by careful band (orbital) engineering using first-principles calculations. This kind of doping has helped to change the topology of the band structure, triggering an indirect to direct transition that is optically allowed. It also reduces the band gap significantly, bringing it well into the visible region. We also simulated the optical absorption spectra of these systems and found a comparable/higher absorption coefficient and solar efficiency with respect to the state of the art photovoltaic absorber material CH3NH3PbI3 . A number of materials Cs2(B0.75Pb0.25) (B0.75'Pb0.25) X6 (for various combinations of B ,B ', and X ) are found to be promising

  1. The effectiveness of three sets of school-based instructional materials and community training on the acquisition and generalization of community laundry skills by students with severe handicaps.

    Science.gov (United States)

    Morrow, S A; Bates, P E

    1987-01-01

    This study examined the effectiveness of three sets of school-based instructional materials and community training on acquisition and generalization of a community laundry skill by nine students with severe handicaps. School-based instruction involved artificial materials (pictures), simulated materials (cardboard replica of a community washing machine), and natural materials (modified home model washing machine). Generalization assessments were conducted at two different community laundromats, on two machines represented fully by the school-based instructional materials and two machines not represented fully by these materials. After three phases of school-based instruction, the students were provided ten community training trials in one laundromat setting and a final assessment was conducted in both the trained and untrained community settings. A multiple probe design across students was used to evaluate the effectiveness of the three types of school instruction and community training. After systematic training, most of the students increased their laundry performance with all three sets of school-based materials; however, generalization of these acquired skills was limited in the two community settings. Direct training in one of the community settings resulted in more efficient acquisition of the laundry skills and enhanced generalization to the untrained laundromat setting for most of the students. Results of this study are discussed in regard to the issue of school versus community-based instruction and recommendations are made for future research in this area.

  2. Setting up of Nuclide GRAF-3S spark source mass spectrometer for the analysis of high purity materials

    International Nuclear Information System (INIS)

    Mahalingam, T.R.; Murugaiyan, P.; Soni, K.S.; Venkateswarlu, Ch.

    1975-01-01

    A spark source mass spectrometer model GRAF-35 manufactured by the Nuclide Corporation, U.S.A., was set up for analysis of nuclear-grade and high purity materials. The main difficulty with its successful operation was to achieve and maintain the required level of vacuum i.e. less than 2X10 -8 torr in the magnetic analyser region. With 100 1/s ion pump, the required vacuum could be achieved, but the spectrometer required periodical baking which minimises the life of the instrument. The pumping system was replaced by Ultek Boostivac pump - a combination of ion pump (150 1/s) and a titanium sublimation pump (1000 1/sec speed for condensable vapours) which eliminated baking as the necessary level of vacuum could be easily achieved whenever required. Results of the analysis of zone-refined indium and uranium for trace impurities are given. (M.G.B.)

  3. The improvement in management of material and production reserves of the enterprise in conditions of uncertainty using the fuzzy sets

    Directory of Open Access Journals (Sweden)

    Raskatova M.I.

    2017-01-01

    Full Text Available In the article a method of management of material and production reserves of industrial enterprises in conditions of uncertainty has been suggested. The method proposes that a part of a benchmark in economic and mathematical models of determining the volume and completion time for orders for raw products and materials be represented as fuzzy numbers. The application of fuzzy-set theory allows taking into account the uncertainty of the external environment without using the theory of probability. The use of the latter is often difficult. The criterion for choosing the optimal management strategy is the minimization of the objective function of the total cost connected with reserves management. It is suggested to obtain the benchmarks that are expressed by fuzzy numbers with a method of expert evaluation. Using the results obtained with the suggested approach the decision-maker will be able to form a concrete strategy for reserves management in a constantly changing market situation. The suggested technique is universal; its application is possible in various industries.

  4. Use of INAA in the preparation of a set soil Reference Materials with certified values of total element contents

    International Nuclear Information System (INIS)

    Kucera, J.; Horakova, J.; Soukal, L.

    1997-01-01

    A set of certified Reference Materials was prepared consisting of four natural agricultural soils with normal (n) and elevated (e) levels of element contents: CRM 7001 Light Sandy Soil (n), CRM 7002 Light Sandy Soil (e), CRM 7003 Silty Clay Loam (n), and CRM 7004 Loam (e). In these materials, certified and/or information values of the total contents of the elements As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, V and Zn, and their fractions extractable by aqua regia, boiling and cold 2M nitric acid were derived from an interlaboratory comparison in which 28 laboratories participated. Highly precise and accurate procedures of instrumental neutron activation analysis (INAA) were employed for homogeneity testing and also for certification of the total element contents. For comparation purposes, NIST SRM-2704 Buffalo River Sediment was analyzed by INAA, as well. The INAA results obtained compared very well with the certified and/or information values for four soil CRMs and also with NIST values for SRM-2704. From this agreement, a very high reliability of the new soil CRMs can be inferred. (author)

  5. Exposing diversity

    DEFF Research Database (Denmark)

    Jakobsen, Helle Nordentoft; Nørtoft, Kamilla Pernille Johansen

    on the findings from a pilot project in which we combine approaches from different areas of the visual research field, more specifically visual ethnography and professional development studies. We show two 5 minutes long video narratives to three interdisciplinary focus groups in a nursing home setting...... with elements from literary theory in which the video narratives can be looked on as textual structures with gaps. The meeting between the text and the reader/viewer and how these gaps are filled depends on the reader’s personal and professional competences and preferences in the sense making process....... The findings show that the participants interpret the video narratives very differently and that the negotiation of meaning in filling the gaps initiates collaborative learning....

  6. Thermal comfort characteristics of some selected building materials in the regional setting of Ile-Ife, Nigeria

    Directory of Open Access Journals (Sweden)

    S. K. Fasogbon

    2015-07-01

    Full Text Available In Ile-Ife, it is very common to see quite a lot of local people engaging in mud bricks moulding, concrete block making, mud house construction and the bricklaying profession in general. These have particular bearing on the economy and the political situation of the people involved as in the profession there is set of rules and regulations guiding the rate and procedure for carrying out any such moulding or construction work. Considering the importance of this, the present study investigated the thermal performance of some selected building materials in the ancient city of Ile-Ife in Nigeria. The work demonstrated how a building envelope responds to outdoor conditions through graphic illustrations. This was followed by constructing three physical building models, with model 1 constructed of mud bricks, model 2 constructed of concrete blocks and model 3 constructed of cast concrete. Each of the models was first roofed with galvanised Iron roofing sheets, later with aluminium roofing sheets and finally with asbestos roofing. Readings were taken by inserting TGP-4500 Data loggers into appropriate positions. The results showed that internal temperatures in the mud-brick and cast concrete buildings remained fairly stable despite external diurnal fluctuations. Humidity data collected also showed that fluctuations in external humidity levels do not affect humidity levels within the mud-brick and cast concrete structures significantly. On the other hand, the structure made of concrete blocks responded more to external fluctuations in temperature and humidity. Moreover, humidity levels in the cast concrete building were the least, followed by those in the mud-brick house; while the concrete block structure had the highest level of humidity. It was also discovered that aluminium roofing gave the highest internal temperature, followed by galvanised iron roofing and the least was seen with asbestos roofing. For external diurnal fluctuations, building model

  7. Enzymatic characterization of peptidic materials isolated from aqueous solutions of ammonium cyanide (pH 9) and hydrocyanic acid (pH 6) exposed to ionizing radiation.

    Science.gov (United States)

    Niketic, V; Draganić, Z; Nesković, S; Draganić, I

    1982-01-01

    The enzymatic digestion of some radiolytically produced peptidic materials was examined. The substrates were compounds isolated from 0.1 molar solutions of NH4CN (pH 9) and HCN (pH 6), after their exposure to gamma rays from a 60Co source (15-20 Mrad doses). Commercial proteolytic enzymes pronase and aminopeptidase M were used. The examined materials were of composite nature and proteolytic action was systematically observed after their subsequent purification. In some fractions the effect was found to be positive with up to 30% of peptide bonds cleaved with respect to the amino acid content. These findings support our previous conclusions on the free radical induced formation of peptidic backbones without the intervention of amino acids. Some side effects were also noted which might be of interest in observations on enzymatic cleavage of other composite peptidic materials of abiotic origin.

  8. Development of durable green concrete exposed to deicing chemicals via synergistic use of locally available recycled materials and multi-scale modifiers

    Science.gov (United States)

    2018-02-02

    From the economic and social perspectives, the use of waste materials would not be attractive until their costs and quality can satisfy the construction requirements. In this study, a pure fly ash paste (PFAP) was developed in place of ordinary Portl...

  9. Effectiveness of Devices to Monitor Biofouling and Metals Deposition on Plumbing Materials Exposed to a Full-Scale Drinking Water Distribution System.

    Science.gov (United States)

    Ginige, Maneesha P; Garbin, Scott; Wylie, Jason; Krishna, K C Bal

    2017-01-01

    A Modified Robbins Device (MRD) was installed in a full-scale water distribution system to investigate biofouling and metal depositions on concrete, high-density polyethylene (HDPE) and stainless steel surfaces. Bulk water monitoring and a KIWA monitor (with glass media) were used to offline monitor biofilm development on pipe wall surfaces. Results indicated that adenosine triphosphate (ATP) and metal concentrations on coupons increased with time. However, bacterial diversities decreased. There was a positive correlation between increase of ATP and metal deposition on pipe surfaces of stainless steel and HDPE and no correlation was observed on concrete and glass surfaces. The shared bacterial diversity between bulk water and MRD was less than 20% and the diversity shared between the MRD and KIWA monitor was only 10%. The bacterial diversity on biofilm of plumbing material of MRD however, did not show a significant difference suggesting a lack of influence from plumbing material during early stage of biofilm development.

  10. Effectiveness of Devices to Monitor Biofouling and Metals Deposition on Plumbing Materials Exposed to a Full-Scale Drinking Water Distribution System.

    Directory of Open Access Journals (Sweden)

    Maneesha P Ginige

    Full Text Available A Modified Robbins Device (MRD was installed in a full-scale water distribution system to investigate biofouling and metal depositions on concrete, high-density polyethylene (HDPE and stainless steel surfaces. Bulk water monitoring and a KIWA monitor (with glass media were used to offline monitor biofilm development on pipe wall surfaces. Results indicated that adenosine triphosphate (ATP and metal concentrations on coupons increased with time. However, bacterial diversities decreased. There was a positive correlation between increase of ATP and metal deposition on pipe surfaces of stainless steel and HDPE and no correlation was observed on concrete and glass surfaces. The shared bacterial diversity between bulk water and MRD was less than 20% and the diversity shared between the MRD and KIWA monitor was only 10%. The bacterial diversity on biofilm of plumbing material of MRD however, did not show a significant difference suggesting a lack of influence from plumbing material during early stage of biofilm development.

  11. Increased materiality judgments in financial accounting and external audit:A critical comparison between German and international standard setting

    OpenAIRE

    Müller-Burmeister, Cristina; Velte, Patrick

    2016-01-01

    The materiality principle supports the information function of accounting in order to enhance investors' decisions. Therefore, materiality guides the entity to present relevant information and to prevent information overload. This decision is mostly subjective and is based primarily on the individual's judgement in applying vague legal concepts. This could result in a greater expectation gap between management information and investors' understanding. The EU accounting directive 2013/34/EU st...

  12. Evaluation of the material in creep-exposed critical 12Cr-1Mo-V ferritic steel components of the pressure section of power plant steam boilers

    International Nuclear Information System (INIS)

    Dobrzanski, J.

    2002-01-01

    Metallographic examinations were carried out on ferritic 12Cr-1Mo-V steel with tempered martensite structure after 68,000 - 145,000 hr service in creep conditions. Structural evolution related to the form of martensite, carbide precipitation and internal damage due to long-term action of thermally activated processes was discussed. A generalised scheme of structural evolution and progress of the internal damage was developed in correlation with the life exhaustion ratio. Principles of the classification for ferritic 12Cr-1Mo-V steel after long-term-service were proposed together with the method for evolution of the state of the material for the industrial practice. (author)

  13. Keefektifan setting TPS dalam pendekatan discovery learning dan problem-based learning pada pembelajaran materi lingkaran SMP

    Directory of Open Access Journals (Sweden)

    Rahmi Hidayati

    2017-05-01

    The purpose of this study was to describe the effectiveness of setting Think Pair Share (TPS in the approach to discovery learning and problem-based learning in terms of student achievement, mathematical communication skills, and interpersonal skills of the student.  This study was a quasi-experimental study using the pretest-posttest nonequivalent group design. The research population comprised all Year VIII students of SMP Negeri 1 Yogyakarta. The research sample was randomly selected from eight classes, two classes were elected. The instrument used in this study is the learning achievement test, a test of mathematical communication skills, and interpersonal skills student questionnaires. To test the effectiveness of setting Think Pair Share (TPS in the approach to discovery learning and problem-based learning, the one sample t-test was carried out. Then, to investigate the difference in effectiveness between the setting Think Pair Share (TPS in the approach to discovery learning and problem-based learning, the Multivariate Analysis of Variance (MANOVA was carried out. The research findings indicate that the setting TPS discovery approach to learning and problem-based approach to learning (PBL is effective in terms of learning achievement, mathematical communication skills, and interpersonal skills of the students. No difference in effectiveness between setting TPS discovery approach to learning and problem-based learning (PBL in terms of learning achievement, mathematical communication skills, and interpersonal skills of the students. Keywords: TPS setting in discovery learning approach, in problem-based learning, academic achievement, mathematical communication skills, and interpersonal skills of the student

  14. A Set of English Instructional Materials Using Task-Based Learning for News Production Management Study Program in STMM “MMMTC” Yogyakarta

    Directory of Open Access Journals (Sweden)

    Geovanna Gistha Wicita

    2016-12-01

    Full Text Available The News Production Management Study Program (NPMSP in STMM “MMTC” Yogyakarta is a study program that has an English subject in the third semester. Due to the lack of time and materials for the students, English, which they will use a lot in journalism, becomes their barrier in learning. Therefore, this research attempted to develop a set of English instructional materials using task-based learning for the third semester students of the NPMSP STMM “MMTC” Yogyakarta. This research aimed to answer how the materials are developed and what the materials look like. To gather the information, the researcher adopted Borg & Gall’s (1986 Research and Development (R&D method which was combined with Kemp’s instructional design model (1977 covering eight flexible steps. Due to time and financial constraints, only five steps of R&D were conducted in designing the materials. To gather the information, the researcher conducted some interviews. After designing the materials, the interview was conducted. The interview results showed that the designed materials were good, appropriate, and applicable. Nine suggestions were obtained to revise the materials which covered the level of difficulty of the text, the content of the exercises, the overview of the learning materials, teaching media, lesson plans, instructions, layout, and material implementation. The materials consist of six units. Each unit contains five sessions, namely “What’s Up?”, “Entering the Newsroom”, “Journalists’ Project”, “Entering the News Editor Room”, and “Lesson Learned”.   DOI: https://doi.org/10.24071/llt.2015.180107

  15. Effects of crack front curvature on J–R curve testing using clamped SE(T) specimens of homogeneous materials

    International Nuclear Information System (INIS)

    Huang, Yifan; Zhou, Wenxing

    2015-01-01

    Three-dimensional (3D) finite element analyses (FEA) of clamped single-edge tension (SE(T)) specimens are performed to investigate the impact of the crack front curvature on the elastic compliance, compliance rotation correction factor and average J-integral evaluated over the crack front. Specimens with six average crack lengths (i.e. a_a_v_e/W = 0.2–0.7) and three thickness-to-width ratios (i.e. B/W = 0.5, 1 and 2) are analyzed. The curved crack front is assumed to be bowed symmetrically and characterized by a power-law expression with a wide range of curvatures. Several crack front straightness requirements for SE(B) and C(T) specimens specified in BS7448, ISO and ASTM E1820 standards are reviewed. Based on results of the numerical investigation, new crack front straightness criteria for the SE(T) specimen are proposed in the context of the nine-point measurement by using as a criterion that the errors in the estimated compliance and average J values should be no more than five percent. The proposed criteria depend on both a_a_v_e/W and B/W, and are more advantageous than those specified in the BS, ISO and ASTM standards in terms of controlling the differences in J and compliance between the specimens with curved and straight crack fronts. - Highlights: • Investigate the impacts of crack front curvature on the compliance, rotation correction factor and J for SE(T) specimens. • Validate the applicabilities of crack front straightness criteria specified in the seven test standards on SE(T) specimens. • Recommend new crack front straightness criteria for the SE(T) specimen.

  16. Validation of the Instructional Materials Motivation Survey (IMMS) in a self-directed instructional setting aimed at working with technology

    NARCIS (Netherlands)

    Loorbach, N.R.; Peters, O.; Karreman, Joyce; Steehouder, M.F.

    2015-01-01

    The ARCS Model of Motivational Design has been used myriad times to design motivational instructions that focus on attention, relevance, confidence and satisfaction in order to motivate students. The Instructional Materials Motivation Survey (IMMS) is a 36-item situational measure of people's

  17. Materialism.

    Science.gov (United States)

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

  18. Synthesis of Hierarchical Sisal-Like V2O5 with Exposed Stable {001} Facets as Long Life Cathode Materials for Advanced Lithium-Ion Batteries.

    Science.gov (United States)

    Wu, Naiteng; Du, Wuzhou; Liu, Guilong; Zhou, Zhan; Fu, Hong-Ru; Tang, Qianqian; Liu, Xianming; He, Yan-Bing

    2017-12-20

    Vanadium pentoxide (V 2 O 5 ) is considered a promising cathode material for advanced lithium-ion batteries owing to its high specific capacity and low cost. However, the application of V 2 O 5 -based electrodes has been hindered because of their inferior conductivity, cycling stability, and power performance. Herein, hierarchical sisal-like V 2 O 5 microstructures consisting of primary one-dimensional (1D) nanobelts with [001] facets orientation growth and rich oxygen vacancies are synthesized through a facile hydrothermal process using polyoxyethylene-20-cetyl-ether as the surface control agent, followed by calcination. The primary 1D nanobelt shortens the transfer path of electrons and ions, and the stable {001} facets could reduce the side reaction at the interface of electrode/electrolyte, simultaneously. Moreover, the formation of low valence state vanadium would generate the oxygen vacancies to facilitate lithium-ion diffusion. As a result, the sisal-like V 2 O 5 manifests excellent electrochemical performances, including high specific capacity (297 mA h g -1 at a current of 0.1 C) and robust cycling performance (capacity fading 0.06% per cycle). This work develops a controllable method to craft the hierarchical sisal-like V 2 O 5 microstructures with excellent high rate and long-term cyclic stability.

  19. Application of nanostructural materials in electro optical measuring sets of big powers based on usage of optical effects

    Science.gov (United States)

    Salihov, Aidar I.; Tljavlin, Anfar Z.; Kusimov, Salavat M.

    2005-06-01

    Optically transparent nanostructural materials show to themselves a heightened interest owing to display in them the new physic mechanical properties. Variation of structure of the materials received by methods of intensive plastic deformation, results in variation of many fundamental parameters. Among them special interest was caused with variations of fundamental magnetic characteristics. One of them is the magnetization of saturation, which is usually structurally tolerant, but reflects changes in an atomic-crystal structure of solids. Even in the first probing of the transparent nanostructures, received by intensive deformation by torsion of samples, was found that the magnetization of saturation was revealed at room temperature in comparison with coarse-grained samples. High-power measuring devices are based on Faraday effect, representing itself rotation of a plane of polarization of linearly polarized light in optical active substances under action of a magnetic field. Application of nanostructural materials in the optical insulator, which is the main part of the measuring device, allows improving the measuring characteristics of instruments qualitatively. Brought losses in Faraday cell make 0,35 -0,89 dB instead of 0,7 - I,2 dB, and value of the backward losses makes not less than 62 dB instead of 55 dB. Undoubtedly, improvement of the given parameters allows making the measuring operations with the greater accuracy, reducing both absolute, and relative errors.

  20. Developmental toxicity studies with 6 forms of titanium dioxide test materials (3 pigment-different grade & 3 nanoscale) demonstrate an absence of effects in orally-exposed rats.

    Science.gov (United States)

    Warheit, D B; Boatman, R; Brown, S C

    2015-12-01

    Six different commercial forms and sizes of titanium dioxide particles were tested in separate developmental toxicity assays. The three pigment-grade (pg) or 3 ultrafine (uf)/nanoscale (anatase and/or rutile) titanium dioxide (TiO2) particle-types were evaluated for potential maternal and developmental toxicity in pregnant rats by two different laboratories. All studies were conducted according to OECD Guideline 414 (Prenatal Developmental Toxicity Study). In addition, all test materials were robustly characterized. The BET surface areas of the pg and uf samples ranged from 7 to 17 m(2)/g and 50-82 m(2)/g respectively (see Table 1). The test substances were formulated in sterile water. In all of the studies, the formulations were administered by oral gavage to time-mated rats daily beginning around the time of implantation and continuing until the day prior to expected parturition. In 3 of the studies (uf-1, uf-3, & pg-1), the formulations were administered to Crl:CD(SD) rats beginning on gestation day (GD) 6 through GD 20. In 3 additional studies (uf-2, and pg-2, pg-3 TiO2 particles), the formulations were administered to Wistar rats beginning on GD 5 through 19. The dose levels used in all studies were 0, 100, 300, or 1000 mg/kg/day; control group animals were administered the vehicle. During the in-life portions of the studies, body weights, food consumption, and clinical observations before and after dosing were collected on a daily basis. All dams were euthanized just prior to expected parturition (GD 21 for Crl:CD(SD) rats and GD 20 for Wistar rats). The gross necropsies included an examination and description of uterine contents including counts of corpora lutea, implantation sites, resorptions, and live and dead fetuses. All live fetuses were sexed, weighed, and examined externally and euthanized. Following euthanasia, fresh visceral and head examinations were performed on selected fetuses. The fetal carcasses were then processed and examined for skeletal

  1. On the effective atomic number and electron density: A comprehensive set of formulas for all types of materials and energies above 1 keV

    DEFF Research Database (Denmark)

    Manohara, S.R.; Hanagodimath, S.M.; Thind, K.S.

    2008-01-01

    A comprehensive and consistent set of formulas is given for calculating the effective atomic number and electron density for all types of materials and for all photon energies greater than 1 keV. The are derived from first principles using photon interaction cross sections of the constituent atom....... The theory is illustrated by calculations and experiments for molecules of medical and biological interest, glasses for radiation shielding, alloys, minerals and liquids....

  2. Study of the structure and development of the set of reference materials of composition and structure of heat resisting nickel and intermetallic alloys

    Directory of Open Access Journals (Sweden)

    E. B. Chabina

    2016-01-01

    Full Text Available Relevance of research: There are two sizes (several microns and nanodimensional of strengthening j'-phase in single-crystal heat resisting nickel and intermetallic alloys, used for making blades of modern gas turbine engines (GTD. For in-depth study of structural and phase condition of such alloys not only qualitative description of created structure is necessary, but quantitative analysis of alloy components geometrical characteristics. Purpose of the work: Development of reference material sets of heat resisting nickel and intermetallic alloy composition and structure. Research methods: To address the measurement problem of control of structural and geometrical characteristics of single-crystal heat resisting and intermetallic alloys by analytical microscopy and X-ray diffraction analysis the research was carried out using certified measurement techniques on facilities, entered in the Register of Measurement Means of the Russian Federation. The research was carried out on microsections, foils and plates, cut in the plane {100}. Results: It is established that key parameters, defining the properties of these alloys are particle size of strengthening j' -phase, the layer thickness of j-phase between them and parameters of phases lattice. Metrological requirements for reference materials of composition and structure of heat resisting nickel and intermetallic alloys are formulated. The necessary and sufficient reference material set providing the possibility to determine the composition and structure parameters of single-crystal heat resisting nickel and intermetallic alloys is defined. The developed RM sets are certified as in-plant reference materials. Conclusion: The reference materials can be used for graduation of spectral equipment when conducting element analysis of specified class alloys; for calibration of means of measuring alloy structure parameters; for measurement of alloys phases lattice parameters; for structure reference pictures

  3. A Pilot Examination of the Methods Used to Counteract Insider Threat Security Risks Associated with the Use of Radioactive Materials in the Research and Clinical Setting.

    Science.gov (United States)

    Tsenov, B G; Emery, R J; Whitehead, L W; Gonzalez, J Reingle; Gemeinhardt, G L

    2018-03-01

    While many organizations maintain multiple layers of security control methodologies to prevent outsiders from gaining unauthorized access, persons such as employees or contractors who have been granted legitimate access can represent an "insider threat" risk. Interestingly, some of the most notable radiological events involving the purposeful contamination or exposure of individuals appear to have been perpetrated by insiders. In the academic and medical settings, radiation safety professionals focus their security efforts on (1) ensuring controls are in place to prevent unauthorized access or removal of sources, and (2) increasing security controls for the unescorted accessing of large sources of radioactivity (known as "quantities of concern"). But these controls may not completely address the threat insiders represent when radioactive materials below these quantities are present. The goal of this research project was to characterize the methodologies currently employed to counteract the insider security threat for the misuse or purposeful divergence of radioactive materials used in the academic and medical settings. A web-based survey was used to assess how practicing radiation safety professionals in academic and medical settings anticipate, evaluate, and control insider threat security risks within their institutions. While all respondents indicated that radioactive sources are being used in amounts below quantities of concern, only 6 % consider insider threat security issues as part of the protocol review for the use of general radioactive materials. The results of this survey identify several opportunities for improvement for institutions to address security gaps.

  4. The development of the first set of Brazilian reference materials for the petroleum sector; O desenvolvimento dos primeiros materiais de referencia nacionais para o setor de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Zucchini, Ricardo R. [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil). Agrupamento de Materiais de Referencia

    2004-07-01

    The petroleum sector uses a number of standardized tests to characterize raw materials and products. The development of in-company programs for assurance of measurement quality, the increasing need to demonstrate proficiency by means of certification schemes or by widely accepted metrological practices, have been promoting a more intensive use of certified reference materials, in calibration as well as in validation of measurement methods and also in order to show the qualification of the laboratories. In this paper it is presented the preparation, performed by IPT's Reference Materials Group, of the first set of reference materials specially developed considering the needs of the petroleum community. Briefly, are presented the identification of the demands from the users, selection of matrices, homogeneity tests and stability studies, and the certification of the new reference materials, which are four diesel fuel oils with certified sulfur contents and one material with flash point certified by TAG and Pensky-Martens methods. It is presented a summary of the certification process, performed by means of a combined effort of several professionals that are now working at laboratories of research institutions, refineries and other industries, universities, fuel monitoring facilities and in National Petroleum Agency. (author)

  5. Recycling of Pre-Washed Municipal Solid Waste Incinerator Fly Ash in the Manufacturing of Low Temperature Setting Geopolymer Materials

    Directory of Open Access Journals (Sweden)

    Raffaele Cioffi

    2013-08-01

    Full Text Available In this work, three samples of municipal solid waste incinerators fly ash (MSWI-FA have been stabilized in systems containing coal fly ash to create geopolymers through a polycondensation reaction. Monolithic products have been obtained with both MSWI fly ash as received and after the partial removal of chloride and sulfate by water washing. The polycondensation products have been characterized qualitatively by means of Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy and quantitatively, through the determination of the volume of reacted water and silicate. Furthermore, the heavy metals and chloride releases together with the physico-mechanical properties have been evaluated on the hardened products. In conclusion, considering the technological and environmental performances of the obtained geopolymers, they could be suitable for many non-structural applications, such as backfilling of abandoned quarries, decorative materials or brick fireplaces, hearths, patios, etc.

  6. Recycling of Pre-Washed Municipal Solid Waste Incinerator Fly Ash in the Manufacturing of Low Temperature Setting Geopolymer Materials.

    Science.gov (United States)

    Ferone, Claudio; Colangelo, Francesco; Messina, Francesco; Santoro, Luciano; Cioffi, Raffaele

    2013-08-12

    In this work, three samples of municipal solid waste incinerators fly ash (MSWI-FA) have been stabilized in systems containing coal fly ash to create geopolymers through a polycondensation reaction. Monolithic products have been obtained with both MSWI fly ash as received and after the partial removal of chloride and sulfate by water washing. The polycondensation products have been characterized qualitatively by means of Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy and quantitatively, through the determination of the volume of reacted water and silicate. Furthermore, the heavy metals and chloride releases together with the physico-mechanical properties have been evaluated on the hardened products. In conclusion, considering the technological and environmental performances of the obtained geopolymers, they could be suitable for many non-structural applications, such as backfilling of abandoned quarries, decorative materials or brick fireplaces, hearths, patios, etc.

  7. Materials

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2009-02-01

    Full Text Available . It is generally included as part of a structurally insulated panel (SIP) where the foam is sandwiched between external skins of steel, wood or cement. Cement composites Cement bonded composites are an important class of building materials. These products... for their stone buildings, including the Egyptians, Aztecs and Inca’s. As stone is a very dense material it requires intensive heating to become warm. Rocks were generally stacked dry but mud, and later cement, can be used as a mortar to hold the rocks...

  8. (Q)SAR tools for priority setting: A case study with printed paper and board food contact material substances.

    Science.gov (United States)

    Van Bossuyt, Melissa; Van Hoeck, Els; Raitano, Giuseppa; Manganelli, Serena; Braeken, Els; Ates, Gamze; Vanhaecke, Tamara; Van Miert, Sabine; Benfenati, Emilio; Mertens, Birgit; Rogiers, Vera

    2017-04-01

    Over the last years, more stringent safety requirements for an increasing number of chemicals across many regulatory fields (e.g. industrial chemicals, pharmaceuticals, food, cosmetics, …) have triggered the need for an efficient screening strategy to prioritize the substances of highest concern. In this context, alternative methods such as in silico (i.e. computational) techniques gain more and more importance. In the current study, a new prioritization strategy for identifying potentially mutagenic substances was developed based on the combination of multiple (quantitative) structure-activity relationship ((Q)SAR) tools. Non-evaluated substances used in printed paper and board food contact materials (FCM) were selected for a case study. By applying our strategy, 106 out of the 1723 substances were assigned 'high priority' as they were predicted mutagenic by 4 different (Q)SAR models. Information provided within the models allowed to identify 53 substances for which Ames mutagenicity prediction already has in vitro Ames test results. For further prioritization, additional support could be obtained by applying local i.e. specific models, as demonstrated here for aromatic azo compounds, typically found in printed paper and board FCM. The strategy developed here can easily be applied to other groups of chemicals facing the same need for priority ranking. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Co3O4 nanocrystals with exposed low-surface-energy planes anchored on chemically integrated graphitic carbon nitride-modified nitrogen-doped graphene: A high-performance anode material for lithium-ion batteries

    Science.gov (United States)

    Zhang, Wenyao; Fu, Yongsheng; Wang, Xin

    2018-05-01

    A facile strategy to synthesize a composite composed of cubic Co3O4 nanocrystals anchored on chemically integrated g-C3N4-modified N-graphene (CN-NG) as an advanced anode material for high-performance lithium-ion batteries is reported. It is found that the morphology of the Co3O4 nanocrystals contains blunt-edge nanocubes with well-demarcated boundaries and numerous exposed low-index (1 1 1) crystallographic facets. These planes can be directly involved in the electrochemical reactions, providing rapid Li-ion transport channels for charging and discharging and thus enhancing the round-trip diffusion efficiency. On the other hand, the CN-NG support displays unusual textural features, such as superior structural stability, accessible active sites, and good electrical conductivity. The experimental results reveal that the chemical and electronic coupling of graphitic carbon nitride and nitrogen-doped graphene synergistically facilitate the anchoring of Co3O4 nanocrystals and prevents their migration. The resulting Co3O4/CN-NG composite exhibits a high specific reversible capacity of up to 1096 mAh g-1 with excellent cycling stability and rate capability. We believe that such a hybrid carbon support could open a new path for applications in electrocatalysis, sensors, supercapacitors, etc., in the near future.

  10. Fracture behaviour of the 14Cr ODS steel exposed to helium and liquid lead

    Energy Technology Data Exchange (ETDEWEB)

    Hojna, Anna, E-mail: Anna.Hojna@cvrez.cz [Centrum Vyzkumu Rez s.r.o., UJV Group, Rez 130, 250 68 Husinec (Czech Republic); Di Gabriele, Fosca [Centrum Vyzkumu Rez s.r.o., UJV Group, Rez 130, 250 68 Husinec (Czech Republic); Hadraba, Hynek; Husak, Roman; Kubena, Ivo [CEITEC IPM, Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Zizkova 22, 616 62 Brno (Czech Republic); Rozumova, Lucia; Bublikova, Petra; Kalivodova, Jana [Centrum Vyzkumu Rez s.r.o., UJV Group, Rez 130, 250 68 Husinec (Czech Republic); Matejicek, Jiri [Institute of Plasma Physics, Academy of Sciences of the Czech Republic, Za Slovankou 1782/3, 182 00 Praha (Czech Republic)

    2017-07-15

    This work describes the fracture behaviour of the 14Cr ODS steel produced by mechanical alloying process, after high temperature exposures. Small specimens were exposed to helium gas in a furnace at 720 °C for 500 h. Another set of specimens was exposed to flowing liquid lead in the COLONRI II loop at 650 °C for 1000 h. All specimens were tested for the impact and tensile behaviour. The impact test results are compared to other sets of specimens in the as received state and after isothermal annealing at 650 °C for 1000 h. The impact curves of the exposed materials showed positive shifts on the transition temperature. While the upper shelf value did not change in the Pb exposed ODS steel, it significantly increased in the He exposed one. The differences are discussed in terms of surface and subsurface microscopy observation. The embrittlement can be explained as the effect of a slight change in the grain boundary and size distribution combined with the depletion of sub-surface region from alloying elements forming oxide scale on the surface. - Highlights: •We compared the impact energy curves of as received, isothermally aged and He/Pb exposed ODS steel samples. •The highest transition temperature showed the ODS steel exposed to liquid Pb at 650 °C for 1000 h. •We observed the higher tendency of the He exposed samples to crack arrester delamination than the Pb exposed ones. •The crack arrested delamination induced apparent increase of impact energies.

  11. INFLUENCE OF PACKAGING MATERIAL AND STORAGE TIME ON PHYSICAL, CHEMICAL AND MICROBIOLOGICAL PROPERTIES OF SET YOGURT: A COMPARATIVE STUDY BETWEEN MODIFIED BIODEGRADABLE POLY(LACTIC ACID AND POLYPROPYLENE

    Directory of Open Access Journals (Sweden)

    NAWADON PETCHWATTANA

    2016-10-01

    Full Text Available The current paper investigates the influence of storage time and type of polymeric packaging material on the chemical, physical and microbiological properties of set yogurt. Firstly, poly(lactic acid (PLA was modified by using a core-shell rubber (CSR and an acrylic processing aid (PA to produce PLA with high toughness and good processability. Secondly, an appropriate PLA/PA/CSR composition was selected and fabricated to yogurt cup. The yogurt was stored in both modified PLA and polypropylene (PP packages to observe some physical, chemical and biological changes. Finally, the biodegradation test was made on both packages and compared with that cellulose. Experimental results revealed that adding 5wt% CSR gave PLA/PA as tough as PP. Types of packaging material and storage time did not change the color of yogurt. The number of lactic acid bacteria grew significantly after they had been incubated for 6 days. The bacterial viability decreased dramatically due to the increased acidity and the decreased pH. A positive impact on the viability of bacterial growth was found when yogurt was stored in modified PLA package. This made yogurt had more health benefits than stored in PP package. The biodegradation test results indicated that the modified PLA degraded at a rapid rate. It achieved approximately 50% biodegradation within 40 days which was comparable to the time required to degrade the cellulose, whereas PP was non-biodegradable over the period studied. In summary, substitution conventional PP by a novel modified PLA seems to be a better way for both the health and the environment benefits.

  12. Disposal of tritium-exposed metal hydrides

    International Nuclear Information System (INIS)

    Nobile, A.; Motyka, T.

    1991-01-01

    A plan has been established for disposal of tritium-exposed metal hydrides used in Savannah River Site (SRS) tritium production or Materials Test Facility (MTF) R ampersand D operations. The recommended plan assumes that the first tritium-exposed metal hydrides will be disposed of after startup of the Solid Waste Disposal Facility (SWDF) Expansion Project in 1992, and thus the plan is consistent with the new disposal requiremkents that will be in effect for the SWDF Expansion Project. Process beds containing tritium-exposed metal hydride powder will be disposed of without removal of the powder from the bed; however, disposal of tritium-exposed metal hydride powder that has been removed from its process vessel is also addressed

  13. Exposing interdisciplinary diversity in a health care setting

    DEFF Research Database (Denmark)

    Olesen, Birgitte Ravn; Nordentoft, Helle Merete; Nørtoft, Kamilla

    (Peräkylä & Vehviläinen, 2003). There seems to be a tension between these normative theories and situated embodied practices Phillips, Kristiansen, Vehviläinen & Gunnarsson, 2012). In the paper we investigate how an interdisciplinary and participatory learning environment can be designed to mediate...... the normative and evidence based interaction models based on normative theories which are systematically introduced as part of practitioners’ competence development . We question the relevance of this pedagogical approach as we see these models as abstract idealizations whereas practices unfold in situ......). Inspired by Bakhtin’s dialogical theory, we look at centripetal and centrifugal forces in participants’ talk and also their tolerance for the emergence of multiple, different and interdisciplinary knowledge forms (Phillips, 2011). Method In the paper we draw on data from 6 interdisciplinary workshops...

  14. Fracture behaviour of the 14Cr ODS steel exposed to helium and liquid lead

    Science.gov (United States)

    Hojna, Anna; Di Gabriele, Fosca; Hadraba, Hynek; Husak, Roman; Kubena, Ivo; Rozumova, Lucia; Bublikova, Petra; Kalivodova, Jana; Matejicek, Jiri

    2017-07-01

    This work describes the fracture behaviour of the 14Cr ODS steel produced by mechanical alloying process, after high temperature exposures. Small specimens were exposed to helium gas in a furnace at 720 °C for 500 h. Another set of specimens was exposed to flowing liquid lead in the COLONRI II loop at 650 °C for 1000 h. All specimens were tested for the impact and tensile behaviour. The impact test results are compared to other sets of specimens in the as received state and after isothermal annealing at 650 °C for 1000 h. The impact curves of the exposed materials showed positive shifts on the transition temperature. While the upper shelf value did not change in the Pb exposed ODS steel, it significantly increased in the He exposed one. The differences are discussed in terms of surface and subsurface microscopy observation. The embrittlement can be explained as the effect of a slight change in the grain boundary and size distribution combined with the depletion of sub-surface region from alloying elements forming oxide scale on the surface.

  15. Effects of the material composition in the TL curves of alkaline halides with Eu{sup 2+} exposed to {beta} radiation; Efectos de la composicion del material en las curvas de TL de halogenuros alcalinos con Eu{sup 2+} expuestos a radiacion {beta}

    Energy Technology Data Exchange (ETDEWEB)

    Perez S, R.; Piters, T.; Aceves, R.; Rodriguez M, R. [Dpto. de Investigacion en Fisica, Universidad de Sonora, 83190 Hermosillo, Sonora (Mexico)

    2006-07-01

    The solid state dosemeters plays a very important paper in the growing use of the ionizing radiation. When being increased the use of the radioactive isotopes in the medicine and in the industry, the necessity to have materials but adapted in each case it has increased. To synthesize such materials, it is necessary to enlarge the knowledge on the paper that its play the physical characteristics of the crystals such as the crystalline structure, the lattice constant, imbibed nano structures, dislocations, ions size, electronic states of the ions, etc., on the effects of the ionizing radiation. In the past its have been carried out many studies approaching these problems in some materials, but we consider that its are insufficient before the challenges of the applications. To contribute to the understanding of these effects, we present a study focused to alkaline halide crystals impurified with Eu{sup 2+} ions, making an analysis on the paper that its play a) the ions concentration of Eu{sup 2+} in KBr: Eu{sup 2+}, b) the different sites of trapping of electrons and holes in KBr: Eu{sup 2+}, KCl: Eu{sup 2+}, RbBr:Eu{sup 2+}, RbCl: Eu{sup 2+} and c) the composition of the crystalline solid solutions KCl{sub x}Br{sub 1-X}: Eu{sup 2+} and RbCI{sub x}KBr{sub 1-x}: Eu{sup 2+} on the thermoluminescence curve when these materials are exposed to small dose of {beta} irradiation. The increase in the concentration of Eu{sup 2+} ions produces a smaller relative intensity of the emissions of high temperature for a given dose and it is found that in a RbCl{sub x}KBr{sub 1-x}: Eu{sup 2+} with the greater/smaller concentration of Cl{sup -} ions, the temperature of the characteristic emission is near to the 453/373 K. The composition x of halogenous ions and not the one of alkaline in the crystalline solid solution dominates the landslide of the temperature of the emission. (Author)

  16. Study of bituminous surface treatments in Virginia : Phase II, Summer, 1964 : Distribution characteristics of materials, effectiveness of one size aggregate, setting time.

    Science.gov (United States)

    1970-01-01

    Distribution Characteristics of Materials: Ten bituminous distributors and ten chip spreading operations were investigated the former by cotton pad, cup, and trough tests; the latter by measuring the distance covered by a truckload and by placing pan...

  17. The exposed breast

    International Nuclear Information System (INIS)

    Ingman, Wendy

    2014-01-01

    The skin and lungs are two tissues that are frequently bombarded with cancer-initiating factors, such as ultraviolet rays from the sun and smoke and pollutants in the air we breathe. Yet breast cancer is the most common type of cancer in Australian women, affecting one in eight before the age of 85. It is more common than skin melanoma and lung cancer. Why, then, does the breast so commonly get cancer when it is not a tissue that is particularly exposed to the environmental agents that increase cancer risk in other major organs? Is there something unique about this tissue that makes it particularly susceptible? The breast undergoes cellular changes over the course of the monthly menstrual cycle, and and these changes affect cancer susceptibility. Rising levels of the hormones oestrogen and progesterone occur immediately after the egg is released from the ovary, and these hormones cause the breast cells to divide and change to accommodate further development if pregnancy occurs. If the woman becomes pregnant, the cells in the breast continue to develop and become the milk-producing structures required to feed a newborn baby. But if pregnancy does not occur there is a drop in progesterone, which triggers the death of the newly developed breast cells. This occurs at the same time women have their period. Then the cycle starts again, and continues every month until menopause, unless the woman becomes pregnant.

  18. Exposing the faults

    International Nuclear Information System (INIS)

    Richardson, P.J.

    1989-01-01

    UK NIREX, the body with responsibility for finding an acceptable strategy for deposition of radioactive waste has given the impression throughout its recent public consultation that the problem of nuclear waste is one of public and political acceptability, rather than one of a technical nature. However the results of the consultation process show that it has no mandate from the British public to develop a single, national, deep repository for the burial of radioactive waste. There is considerable opposition to this method of managing radioactive waste and suspicion of the claims by NIREX concerning the supposed integrity and safety of this deep burial option. This report gives substance to those suspicions and details the significant areas of uncertainty in the concept of effective geological containment of hazardous radioactive elements, which remain dangerous for tens of thousands of years. Because the science of geology is essentially retrospective rather than predictive, NIREX's plans for a single, national, deep 'repository' depend heavily upon a wide range of assumptions about the geological and hydrogeological regimes in certain areas of the UK. This report demonstrates that these assumptions are based on a limited understanding of UK geology and on unvalidated and simplistic theoretical models of geological processes, the performance of which can never be directly tested over the long time-scales involved. NIREX's proposals offer no guarantees for the safe and effective containment of radioactivity. They are deeply flawed. This report exposes the faults. (author)

  19. Counting SET-free sets

    OpenAIRE

    Harman, Nate

    2016-01-01

    We consider the following counting problem related to the card game SET: How many $k$-element SET-free sets are there in an $n$-dimensional SET deck? Through a series of algebraic reformulations and reinterpretations, we show the answer to this question satisfies two polynomiality conditions.

  20. Elements of set theory

    CERN Document Server

    Enderton, Herbert B

    1977-01-01

    This is an introductory undergraduate textbook in set theory. In mathematics these days, essentially everything is a set. Some knowledge of set theory is necessary part of the background everyone needs for further study of mathematics. It is also possible to study set theory for its own interest--it is a subject with intruiging results anout simple objects. This book starts with material that nobody can do without. There is no end to what can be learned of set theory, but here is a beginning.

  1. Moisture buffer capacity of different insulation materials

    DEFF Research Database (Denmark)

    Peuhkuri, Ruut Hannele; Rode, Carsten; Hansen, Kurt Kielsgaard

    2004-01-01

    . In the isothermal tests the material samples were exposed to the same change in the relative humidity of the ambient air on both sides, while the samples were exposed to variations in relative humidity only on the cold side in the non-isothermal tests. The results of these rather different measurement principles...... lead to more durable constructions. In this paper, a large range of very different thermal insulation materials have been tested in specially constructed laboratory facilities to determine their moisture buffer capacity. Both isothermal and nonisothermal experimental set-ups have been used...... are discussed, and different ways are presented how to determine the moisture buffer capacity of the materials using partly standard material parameters and partly parameters determined from the actual measurements. The results so far show that the determination of moisture buffer capacity is very sensitive...

  2. The Use of Sexually Explicit Material in Clinical, Educational and Research Settings in the United Kingdom and Its Relation to the Development of Psychosexual Therapy and Sex Education

    Science.gov (United States)

    Brewster, Marnie; Wylie, Kevan R.

    2008-01-01

    The present review describes the development and use of sexually explicit material in sex education within UK psychosexual therapy clinics, medical schools and also in state-maintained secondary schools with reference to interests that have shaped the provision of sex education since the early twentieth century. A short summary of published books…

  3. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  4. Automatic sets and Delone sets

    International Nuclear Information System (INIS)

    Barbe, A; Haeseler, F von

    2004-01-01

    Automatic sets D part of Z m are characterized by having a finite number of decimations. They are equivalently generated by fixed points of certain substitution systems, or by certain finite automata. As examples, two-dimensional versions of the Thue-Morse, Baum-Sweet, Rudin-Shapiro and paperfolding sequences are presented. We give a necessary and sufficient condition for an automatic set D part of Z m to be a Delone set in R m . The result is then extended to automatic sets that are defined as fixed points of certain substitutions. The morphology of automatic sets is discussed by means of examples

  5. Responses of Cell Renewal Systems to Long-term Low-Level Radiation Exposure: A Feasibility Study Applying Advanced Molecular Biology Techniques on Available Histological and Cytological Material of Exposed Animals and Men

    Energy Technology Data Exchange (ETDEWEB)

    Fliedner Theodor M.; Feinendegen Ludwig E.; Meineke Viktor; Fritz Thomas E.

    2005-02-28

    First results of this feasibility study showed that evaluation of the stored material of the chronically irradiated dogs with modern molecular biological techniques proved to be successful and extremely promising. Therefore an in deep analysis of at least part of the huge amount of remaining material is of outmost interest. The methods applied in this feasibility study were pathological evaluation with different staining methods, protein analysis by means of immunohistochemistry, strand break analysis with the TdT-assay, DNA- and RNA-analysis as well as genomic examination by gene array. Overall more than 50% of the investigated material could be used. In particular the results of an increased stimulation of the immune system within the dogs of the 3mSv group as both compared to the control and higher dose groups gives implications for the in depth study of the cellular events occurring in context with low dose radiation. Based on the findings of this study a further evaluation and statistically analysis of more material can help to identify promising biomarkers for low dose radiation. A systematic evaluation of a correlation of dose rates and strand breaks within the dog tissue might moreover help to explain mechanisms of tolerance to IR. One central problem is that most sequences for dog specific primers are not known yet. The discovery of the dog genome is still under progress. In this study the isolation of RNA within the dog tissue was successful. But up to now there are no gene arrays or gene chips commercially available, tested and adapted for canine tissue. The uncritical use of untested genomic test systems for canine tissue seems to be ineffective at the moment, time consuming and ineffective. Next steps in the investigation of genomic changes after IR within the stored dog tissue should be limited to quantitative RT-PCR of tested primer sequences for the dog. A collaboration with institutions working in the field of the discovery of the dog genome could

  6. Responses of Cell Renewal Systems to Long-term Low-Level Radiation Exposure: A Feasibility Study Applying Advanced Molecular Biology Techniques on Available Histological and Cytological Material of Exposed Animals and Men

    International Nuclear Information System (INIS)

    Fliedner Theodor M.; Feinendegen Ludwig E.; Meineke Viktor; Fritz Thomas E.

    2005-01-01

    First results of this feasibility study showed that evaluation of the stored material of the chronically irradiated dogs with modern molecular biological techniques proved to be successful and extremely promising. Therefore an in deep analysis of at least part of the huge amount of remaining material is of outmost interest. The methods applied in this feasibility study were pathological evaluation with different staining methods, protein analysis by means of immunohistochemistry, strand break analysis with the TdT-assay, DNA- and RNA-analysis as well as genomic examination by gene array. Overall more than 50% of the investigated material could be used. In particular the results of an increased stimulation of the immune system within the dogs of the 3mSv group as both compared to the control and higher dose groups gives implications for the in depth study of the cellular events occurring in context with low dose radiation. Based on the findings of this study a further evaluation and statistically analysis of more material can help to identify promising biomarkers for low dose radiation. A systematic evaluation of a correlation of dose rates and strand breaks within the dog tissue might moreover help to explain mechanisms of tolerance to IR. One central problem is that most sequences for dog specific primers are not known yet. The discovery of the dog genome is still under progress. In this study the isolation of RNA within the dog tissue was successful. But up to now there are no gene arrays or gene chips commercially available, tested and adapted for canine tissue. The uncritical use of untested genomic test systems for canine tissue seems to be ineffective at the moment, time consuming and ineffective. Next steps in the investigation of genomic changes after IR within the stored dog tissue should be limited to quantitative RT-PCR of tested primer sequences for the dog. A collaboration with institutions working in the field of the discovery of the dog genome could

  7. Radioactive waste disposal: testing and control for setting of plugging and sealing materials in reduced scale models, in boreholes or in shaft excavations

    International Nuclear Information System (INIS)

    1991-01-01

    In the case of an underground disposal of radioactive waste, the free space between the storage containers and the rock embedment must be backfilled in order to restore both mechanical and thermal continuity of the dug out material and to form a physico-chemical barrier against the diffusion into the subsoil of the radionucleides which may be released by the possible failure of a container. The aim of this research program is to formulate a hydraulic binder based sealing material, whose rheological properties at fresh state allow an easy placing and whose mechanical and physico-chemical properties at hardened state guarantee the effectiveness of the impervious barrier. A first part, done in laboratory, pointed out the formulations to be tested on scale models. These models simulate a storage in vertical shafts (high level radioactive waste) and in galleries (medium level radioactive waste), show the efficiency of placing techniques and the behaviour of the sealing submitted to the heat generated by the waste. The sorptive mortar PETRISOL, patented by SOLETANCHE, brings over a solution meeting not only the technical requirements but also the public expectations as far as environmental protection is concerned. 13 figs.; 14 tabs

  8. Low-temperature setting phosphate ceramics for stabilization of DOE problem low level mixed-waste: I. Material and waste form development

    International Nuclear Information System (INIS)

    Singh, D.; Wagh, A.; Knox, L.; Mayberry, J.

    1994-03-01

    Chemically bonded phosphate ceramics are proposed as candidates for solidification and stabilization of some of the open-quotes problemclose quotes DOE low-level mixed wastes at low-temperatures. Development of these materials is crucial for stabilization of waste streams which have volatile species and any use of high-temperature technology leads to generation of off-gas secondary waste streams. Several phosphates of Mg, Al, and Zr have been investigated as candidate materials. Monoliths of these phosphates were synthesized using chemical routes at room or slightly elevated temperatures. Detailed physical and chemical characterizations have been conducted on some of these phosphates to establish their durability. Magnesium ammonium phosphate has shown to possess excellent mechanical and as well chemical properties. These phosphates were also used to stabilize a surrogate ash waste with a loading ranging from 25-35 wt.%. Characterization of the final waste forms show that waste immobilization is due to both chemical stabilization and physical encapsulation of the surrogate waste which is desirable for waste immobilization

  9. EXPOSE-R2: The Astrobiological ESA Mission on Board of the International Space Station

    Directory of Open Access Journals (Sweden)

    Elke Rabbow

    2017-08-01

    Full Text Available On July 23, 2014, the Progress cargo spacecraft 56P was launched from Baikonur to the International Space Station (ISS, carrying EXPOSE-R2, the third ESA (European Space Agency EXPOSE facility, the second EXPOSE on the outside platform of the Russian Zvezda module, with four international astrobiological experiments into space. More than 600 biological samples of archaea, bacteria (as biofilms and in planktonic form, lichens, fungi, plant seeds, triops eggs, mosses and 150 samples of organic compounds were exposed to the harsh space environment and to parameters similar to those on the Mars surface. Radiation dosimeters distributed over the whole facility complemented the scientific payload. Three extravehicular activities later the chemical samples were returned to Earth on March 2, 2016, with Soyuz 44S, having spent 588 days in space. The biological samples arrived back later, on June 18, 2016, with 45S, after a total duration in space of 531 days. The exposure of the samples to Low Earth Orbit vacuum lasted for 531 days and was divided in two parts: protected against solar irradiation during the first 62 days, followed by exposure to solar radiation during the subsequent 469 days. In parallel to the space mission, a Mission Ground Reference (MGR experiment with a flight identical Hardware and a complete flight identical set of samples was performed at the premises of DLR (German Aerospace Center in Cologne by MUSC (Microgravity User Support Center, according to the mission data either downloaded from the ISS (temperature data, facility status, inner pressure status or provided by RedShift Design and Engineering BVBA, Belgium (calculated ultra violet radiation fluence data. In this paper, the EXPOSE-R2 facility, the experimental samples, mission parameters, environmental parameters, and the overall mission and MGR sequences are described, building the background for the research papers of the individual experiments, their analysis and results.

  10. Going beyond the most exposed people in a dose assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hjerpe, Thomas; Broed, Robert [Facilia AB, Gustavslundsvaegen 151C, SE-167 51 Bromma (Sweden); Ikonen, Ari T.K. [Environmental Research and Assessment, EnviroCase, Ltd., Hallituskatu 1 D 4, FI-28 100 Pori (Finland)

    2014-07-01

    The dose assessment in a long-term radiation safety assessment often focus on assessing dose of a representative person to be used for determining compliance with a radiation dose constraint. This representative person is often assumed to receive a dose that is representative of the most exposed people, i.e., the more highly exposed individuals in the population. This is not always sufficient, the Finnish regulations for disposal of nuclear waste has radiation dose constraint to the most exposed people as well as for larger groups of exposed people. This work presents the methodology to assessing dose of a representative person for a larger group of exposed people as applied by Posiva in the TURVA-2012 safety case for the spent nuclear fuel disposal at Olkiluoto. In addition, annual doses from the set of biosphere calculation cases analysed in TURVA-2012 are presented and discussed. Special focus is given on explaining the differences in exposure levels and exposure routes between the estimated annual doses to representative persons for most exposed people and a larger exposed group. The results show that the annual doses to a larger group of people ranges from one to three orders of magnitude below the annual doses to the most exposed people. Furthermore, the exposure route related to food ingestion is less significant for the larger group of people compared to the most exposed people and that the exposure route related to water ingestion shows the opposite behaviour. (authors)

  11. Investigation of material removal rate (MRR) and wire wear ratio (WWR) for alloy Ti6Al4 V exposed to heat treatment processing in WEDM and optimization of parameters using Grey relational analysis

    Energy Technology Data Exchange (ETDEWEB)

    Altug, Mehmet [Inonu Univ., Malatya (Turkey). Dept. of Machine and Metal Technologies

    2016-11-01

    The study examines the changes of the microstructural, mechanical and conductivity characteristics of the titanium alloy Ti6Al4 V as a result of heat treatment using wire electrical discharge machining, and their effect on machinability. By means of optical microscopy and scanning electron microscopy (SEM), analyses have been performed to determine various characteristics and additionally, microhardness and conductivity measurements have been conducted. Material removal rate (MRR) and wire wear ratio (WWR) values have been determined by using L18 Taguchi test design. The microstructures of the samples have been changed by thermal procedures. Results have been obtained by using the Grey relational analysis (GRA) optimization technique to solve the maximum MRR and minimum WWR values. The best (highest) MRR value is obtained from sample E which was water quenched in dual phase processing. The microstructure of this sample is composed of primary α and α' phases. The best (lowest) WWR value is obtained from sample A.

  12. Investigation of material removal rate (MRR) and wire wear ratio (WWR) for alloy Ti6Al4 V exposed to heat treatment processing in WEDM and optimization of parameters using Grey relational analysis

    International Nuclear Information System (INIS)

    Altug, Mehmet

    2016-01-01

    The study examines the changes of the microstructural, mechanical and conductivity characteristics of the titanium alloy Ti6Al4 V as a result of heat treatment using wire electrical discharge machining, and their effect on machinability. By means of optical microscopy and scanning electron microscopy (SEM), analyses have been performed to determine various characteristics and additionally, microhardness and conductivity measurements have been conducted. Material removal rate (MRR) and wire wear ratio (WWR) values have been determined by using L18 Taguchi test design. The microstructures of the samples have been changed by thermal procedures. Results have been obtained by using the Grey relational analysis (GRA) optimization technique to solve the maximum MRR and minimum WWR values. The best (highest) MRR value is obtained from sample E which was water quenched in dual phase processing. The microstructure of this sample is composed of primary α and α' phases. The best (lowest) WWR value is obtained from sample A.

  13. Francois Loos is presenting a policy bill setting the framework, the phrasing and the resources of the radioactive materials and wastes management

    International Nuclear Information System (INIS)

    2006-01-01

    The bill institutes a national radioactive materials and waste management plan and defines a programme and calendar for research and work leading to implementation of this plan, which will comprise three major points: with a view to looking to reduce the quantity of waste, spent nuclear fuels taken from the nuclear power plants will be reprocessed for recycling in the plants; waste which cannot be recycled will be packaged in a robust matrix and then temporarily stored on the surface; after interim storage, waste which cannot be finally disposed of in a surface facility, will be placed in a deep geological reversible repository. In order to monitor each step in this plan, the bill strengthens independent assessment of research and involves greater information of the public. With regard to financing, the bill clarifies the fact that economic development of the departments concerned by research into disposal options and the research itself will be financed by additional taxes on the operators of nuclear installations. (A.L.B.)

  14. A comparison of chemical compositions of reported altered oceanic crusts and global MORB data set: implication for isotopic heterogeneity of recycled materials

    Science.gov (United States)

    Shimoda, G.; Kogiso, T.

    2017-12-01

    crusts based on reported bulk chemical compositions of altered oceanic crusts and global data sets of MORB. On the basis of the chemical variation, we will discuss isotopic evolution of altered oceanic crusts to delineate isotopic variation of recycled oceanic crusts.

  15. Analyses of Concrete Structures Exposed to Fire

    DEFF Research Database (Denmark)

    Hertz, Kristian

    The text book contains the data and methods necessary for fire safety design of concrete constructions. The methods relate to standard fire as well as to any time of any other fire course.Material data are presented for concretes exposed to fire, and calculation methods are given for the ultimate...... bending capacity of beams and slabs, the ultimate shear capacity of beams, for the instability of columns and walls and for the deflection of prestressed and non-prestressed beams, slabs, walls and columns.All methods have been derived and compared to tests by Kristian Hertz....

  16. The national plan of radioactive materials and wastes management. ASN's notice about the choice of the sites to be investigated in view of the setting up of a disposal facility for low activity/long living wastes

    International Nuclear Information System (INIS)

    2009-07-01

    This short presentation, given by the national safety authority (ASN) at the meeting of July 1, 2009 of the high committee for the nuclear safety transparency and information (HCTISN), presents, first, the second French national plan of radioactive materials and wastes management (PNGMDR) with its main priorities, and then, the choice of the sites to survey in view of the setting up of a disposal facility for low level/long living wastes. The ASN expresses its opinion about the criteria retained by the ANDRA (the national agency of radioactive waste management) to select the most suitable sites. (J.S.)

  17. Lifetime assessment of service-exposed components

    International Nuclear Information System (INIS)

    Kalwa, G.; Weber, H.

    1988-01-01

    A longtime prognosis on the operation of creep-exposed components requires a lifetime analysis. The basis for such an analysis can be improved by an analysis of microstructure and material properties. Actually the grade of material exhaustion has to be regarded as proper assessment quantity. However, stress and time safety also are valuable assessment quantities which should be taken into consideration, especially when the grade of exhaustion is uncertain because of inaccurate input parameters. A correct assessment of the damage state cannot be made without taking into consideration the failure mechanism which has to be assumed for a specific component. With respect to creep the most critical component of a steamline system is the pipe bend because of the risk of large damage events. For this case component metallography by replicas is suggested as preventive test method. The continuation of service of a creep damage pipe bend cannot be recommended. (orig./MM) [de

  18. Material Systems

    DEFF Research Database (Denmark)

    Jensen, Mads Brath; Mortensen, Henrik Rubæk; Mullins, Michael

    2009-01-01

    This paper describes and reflects upon the results of an investigative project which explores the setting up of a material system - a parametric and generative assembly consisting of and taking into consideration material properties, manufacturing constraints and geometric behavior. The project...... approaches the subject through the construction of a logic-driven system aiming to explore the possibilities of a material system that fulfills spatial, structural and performative requirements concurrently and how these are negotiated in situations where they might be conflicting....

  19. Reprocessing of nonoptimally exposed holograms

    International Nuclear Information System (INIS)

    Phipps, G.S.; Robertson, C.E.; Tamashiro, F.M.

    1980-01-01

    Two reprocessing techniques have been investigated that are capable of correcting the effects of nonoptimum optical density of photographic amplitude holograms recorded on Agfa-Gevaert type 10E75 plates. In some cases a reprocessed hologram will exhibit a diffraction efficiency even higher than that obtainable from a hologram exposed and processed to the optimum density. The SNR of the reprocessed holograms is much higher than that of the same holograms belached with cupric bromide. In some cases the SNR approaches the optimum value for a properly exposed amplitude hologram. Subjective image quality and resolution of reprocessed hologram reconstructins appear to be no different than for normal single-development holograms. Repeated reprocessing is feasible and in some cases desirable as a means of increasing diffraction efficiency

  20. Entanglement witnesses arising from exposed positive linear maps

    OpenAIRE

    Ha, Kil-Chan; Kye, Seung-Hyeok

    2011-01-01

    We consider entanglement witnesses arising from positive linear maps which generate exposed extremal rays. We show that every entanglement can be detected by one of these witnesses, and this witness detects a unique set of entanglement among those. Therefore, they provide a minimal set of witnesses to detect all entanglement in a sense. Furthermore, if those maps are indecomposable then they detect large classes of entanglement with positive partial transposes which have nonempty relative int...

  1. Predictors of incident tuberculosis in HIV-exposed children in ...

    African Journals Online (AJOL)

    Objective: To examine the predictors of tuberculosis infection in HIV-exposed children. Design: A longitudinal cohort study nested within a randomised controlled trial. Setting: Antenatal clinics in Dar-es-Salaam, Tanzania. Subjects: Children born to 875 HIV-infected women in Tanzania. Results: A total of 82 children ...

  2. Nondestructive characterization of materials damage

    International Nuclear Information System (INIS)

    Dobmann, G.

    1999-01-01

    The paper discusses two examples of application of NDT for early detection of materials damage, or ageing effects. The first case shows the potential of micromagnetic testing techniques for early detection of hydrogen-induced stress corrosion cracking in pipework. Pipe specimens made of steel X20Cr13, which differed in materials state induced by various heat treatments, were exposed to corrosive attack induced in a closed cycle by simultaneous rinsing with NACE solution and stress application through stamp impact. Various micromagnetic testing parameters were measured at the specimens' outside surface during the annealing period. Further, fatigue experiments were made with specimen sets made of steel 1.4541, under various mechanical and temperature stresses (room temperature and 300 C), for measuring the remanent magnetization of the cylindrical fatigue test blocks (equal geometry) cut out of the specimens, in order to conclude information on the martensite content and the fatigue effects. (Orig./CB) [de

  3. Corrosion of beryllium exposed to celotex and water

    International Nuclear Information System (INIS)

    Hill, M.A.; Butt, D.P.; Lillard, R.S.

    1997-01-01

    Celotex is a commercial rigid cellulose fiberboard product primarily used in the building construction industry. Currently celotex is being used as a packing material in AL-R8 containers. Ion chromatography of celotex packing material at Lawrence Livermore National Laboratory (LLNL) has indicated that this material contains aggressive anions, including chloride, which may accelerate corrosion. It is well known that beryllium is susceptible to pitting corrosion when exposed to chloride containing environments. Levy noted pitting in beryllium at the open circuit potential when exposed to 0.1 M NaCl solution. This investigation attempts to evaluate the potential risk of accelerated beryllium corrosion from celotex and water which may occur naturally when celotex dust comes into contact with moisture from the atmosphere

  4. Advances in treating exposed fractures.

    Science.gov (United States)

    Nogueira Giglio, Pedro; Fogaça Cristante, Alexandre; Ricardo Pécora, José; Partezani Helito, Camilo; Lei Munhoz Lima, Ana Lucia; Dos Santos Silva, Jorge

    2015-01-01

    The management of exposed fractures has been discussed since ancient times and remains of great interest to present-day orthopedics and traumatology. These injuries are still a challenge. Infection and nonunion are feared complications. Aspects of the diagnosis, classification and initial management are discussed here. Early administration of antibiotics, surgical cleaning and meticulous debridement are essential. The systemic conditions of patients with multiple trauma and the local conditions of the limb affected need to be taken into consideration. Early skeletal stabilization is necessary. Definitive fixation should be considered when possible and provisional fixation methods should be used when necessary. Early closure should be the aim, and flaps can be used for this purpose.

  5. The role of the state system of accounting for and control of nuclear material and its relationship with the international safeguards agreements for the set-up of peaceful nuclear programs and activities

    International Nuclear Information System (INIS)

    Mhadhbi, H.

    2010-01-01

    Nuclear energy plays an important role in the development of the economy and is considered as a key element with regard to the growth of the world energy demand due to the limitation of other natural energy resources, its contribution to the protection of the environment and the reduction of CO 2 emission. Several countries, including some Arab countries, are planning to consider the nuclear option in the near future. To provide an assurance to the international community of the peaceful uses of nuclear energy, the International Atomic Energy Agency established legal tools, called Safeguards Agreements, to be accepted by every state willing to run nuclear programmes for peaceful purposes. The most important basis required by these agreements is the State System of Accounting for and Control of Nuclear Material, which plays a primary role for effective and efficient fulfilment of the state commitment with regard to the international safeguards agreements. The requirements for the set-up of a State System of Accounting for and Control , its role, its objectives and its fundamental elements are deeply presented. (author)

  6. Screening and surveillance of workers exposed to mineral dusts

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, G.R.

    1997-12-31

    This publication resulted from a World Health Organisation initiated project to investigate the harmonisation of definitions, approaches and methodologies for the screening and surveillance of workers exposed to mineral dust. The first part of the book provides definitions of screening and surveillance and describes the main elements of such programmes. The second part discusses the practical aspect of the screening and surveillance of working populations exposed to crystalline silica, coal mine dust and asbestos. Although no single set of guidelines is applicable to the development and implementation of a programme for the screening and surveillance of workers exposed to mineral dust, the recommendations, together with certain caveats, should provide a useful starting point. Annexes provide examples of existing programmes in various countries and environments and discuss the use and interpretation of questionnaires, lung spirometry and chest radiography. Overall the book should be of interest to occupational health professionals.

  7. Histomorphological patterns in osseous rests exposed at fire

    International Nuclear Information System (INIS)

    Medina, C.; Tiesler, V.; Oliva, A.I.; Quintana, P.

    2005-01-01

    Histomorphology as part of morphological research studies bony structure on the tissue level. Its methods are applied in this investigation to evaluate histomorphological impact patterns in heat-exposed bony material, particularly color changes, fissure patterns, volumetric reduction, and changes in the size of Haversian canals. These variables were evaluated in exposed thin sections of porcine long bones, obtained during two experimental series. The first one was conducted under stable thermal conditions in a furnace by measuring heat impact in stepped time (I to S hours) and temperature intervals (200 to 800 C). During a second experimental phase, bony samples were exposed to direct fire in defined time and heat intervals. The treated specimens were then sectioned and microscopically scrutinized. The results presented here were designed to offer new analytical, measurable standards in the investigation of forms of heat exposition of the human body, applicable in forensics and the study of ancient Maya posthumous body treatments. (Author)

  8. Creep damage in welds of X 20 CrMoV 12 1 steel. Part 2 - Studies of long term service exposed material and damage data base and calculation of damage distribution and damage resistance; Krypskador i svetsar av X 20 CrMoV 12 1 staal. Etapp 2 - Studier av lingtidspiverkat material och skadedatabas samt berakning av skadefordelning och skadetilighet

    Energy Technology Data Exchange (ETDEWEB)

    Storesund, Jan; Borggreen, Kjeld; Weilin Zang; Nilsson, Henrik; Samuelson, Aake

    2004-09-01

    The present project has been consisted of the following pieces of work on welds of X20 CrMoV 12 1: Analysis of, by use of replica testing, creep damage development in 368 welds in 11 Danish high pressure steam lines with operation up to 200,000 h. Metallographic investigations of four welds from a retired live steam line with approximately 182 000 h in operation. - Evaluation of the influence of the two most common etching methods on the interpretation of creep cavitation. Analysis of the time security of the material, i.e. influence of enhanced temperature or stress on creep life time. Finite element simulations of the creep behaviour of X20 welds where effects of HAZ creep properties, system stresses and degree of multiaxiality in the rupture criterion are studied. In addition a literature study on publications of creep life time in X20 steel was performed in a first, already reported part of the project. The results of the comprehensive replica testing and the metallographic investigations show clear-cut that welds of this material have an excellently long creep life that indeed will reach 200,000 h. The creep damage at that time is in general very limited. The typical creep life for welds of X20 can be evaluated to at least 250,000 h. The reason for that it is not possible to evaluate an even longer creep life is the fact that creep testing and finite element simulations show that creep elongation and creep damage will accelerate considerably later in the creep life than some low alloy steels. In the worst case this acceleration could start already just after 200,000 h. It is also demonstrated that welds of the X20 steel can stand system stresses much better than low alloy steels. Recommendations for how and when inspections and testing of welds of the current material should be performed have been issued. They have been adapted to the findings in the project. The recommendations can, as long as severe damage is absent, allow for longer inspection intervals

  9. Educator Sexual Misconduct: Exposing or Causing Learners to Be Exposed to Child Pornography or Pornography

    Directory of Open Access Journals (Sweden)

    Susan Coetzee

    2016-02-01

    Full Text Available he law recognises that non-contact sexual offences can cause harm and several offences were created to regulate non-contact sexual child abuse offences. Several of these offences deal with the exposure or causing exposure of children to child pornography or pornography. Sexual grooming of children and the “Exposure or display of or causing exposure or display of child pornography or pornography to children” are criminalised in sections 18(2 and 19 of the Criminal Law (Sexual Offences and Related Matters Amendment Act 32 of 2007. And offences in relation to exposing children to disturbing, harmful and age-inappropriate materials are criminalised in sections 24A(2 and (4 of the Films and Publications Act 65 of 1996. In this article the author considered the content of the offences of “Exposure or display of or causing exposure or display of child pornography or pornography to children” in relation to the other offences dealing with exposure of children to child pornography or pornography. Benchmarked against these criminal offences the author then conceptualised exposing learners, or causing the exposure of learners to child pornography or pornography as forms of educator misconduct. The seriousness that should be attached to these forms of misconduct was considered in light of the various criminal offences. The review of the criminal offences and the forms of educator misconduct brought the ineffectiveness of current forms of serious educator misconduct to the fore. There is no form of serious misconduct that covers the transgression of educators who expose learners to child pornography or pornography that can be classified as “XX”. In conclusion a suggestion is made with regard to how a new form of serious misconduct could be worded so as to cover this gap, eg An educator must be dismissed if he or she is found guilty of – (g exposing a learner to or causing exposure of a learner to material classified as “Refused” or

  10. Contaminations of inner surface of magnesium fluoride windows in the `Expose-R' experiment on the International Space Station

    Science.gov (United States)

    Skurat, V. E.

    2017-10-01

    A series of experiments was carried out previously on board of the International Space Station in `EXPOSE-R', a multi-user expose facility, provided by European Space Agency attached to the external surface of the Russian Segment. In one experiment, spores of microorganisms and species of higher plant seeds, in heat-sealed polymer bags were irradiated by solar radiation passed through MgF2 windows in a high space vacuum. After sample exposure, it was found that in many cases the inner surfaces of windows were contaminated. Analysis of the contamination revealed the presence of chemical groups CH2, CH3, NH, OH, C═O, Si-CH3 (Demets et al. in 2015). Their presence in deposits was explained by photofixation of gaseous precursors - some of the vapours of glues and additives in polymeric materials in the core facility of `Expose-R'. Carbon-, oxygen- and silicon-containing groups may be deposited from outer intrinsic atmosphere. This atmosphere is connected with sample compartments and core facility. However, the presence of NH groups on inner surfaces of windows was not expected. This paper shows that the process responsible for carbon-, nitrogen- and oxygen-containing group formation can be a photopolymerization of caprolactam, which is released from the outer Nylon 6 layer of polymer bags under Solar vacuum ultraviolet radiation.

  11. Utopian Materialities

    DEFF Research Database (Denmark)

    Elgaard-Jensen, Torben

    2004-01-01

    In various ways, this paper makes the counter-intuitive claim that the utopian and the material are thoroughlyinterdependent, rather than worlds apart. First, through a reading of Thomas More's Utopia, it is argued thatUtopia is the product of particular kinds of relations, rather than merely...... a detachment from the known world.Second, the utopianism of a new economy firm is examined. It is argued that the physical set-up of the firm -in particular the distribution of tables and chairs - evoke a number of alternatives to ordinary work practice.In this way the materialities of the firm are crucial...... to its persuasive image of being the office of the future.The notion that utopia is achieved through material arrangements is finally related to the analysis of facts andfictions in ANT. It is argued, that even though Utopias are neither fact nor fiction, they are both material andeffective...

  12. The extent of unwanted infrared photoacoustic signals from polymer sampling tubings exposed to ultraviolet radiation

    NARCIS (Netherlands)

    Bicanic, D.; Solyom, A.; Angeli, G.; Wegh, H.; Postumus, M.; Jalink, H.

    1995-01-01

    The extent of unwanted photoacoustic (PA) signals due to volatiles released from various polymer tubing materials [transparent, red and black polyethylene (PE), polymer of tetrafluorethylene (PTFE) and copolymer of tetrafluorethylene and hexafluorethylene (FEP)] when exposed to 245 nm radiation was

  13. Effects of glutamine pretreatment on learning and memory in heat-exposed rats

    Institute of Scientific and Technical Information of China (English)

    Shenghao Zhao; Lei Wang; Qin Wang; Siyi Wang; Chundi Deng; Xianfei Xie; Youe Yan; Hui Wang

    2008-01-01

    BACKGROUND: Glutamine (Gln) pretreatment can protect neural cells from injuries due to heat, ischemia, hypoxia, endotoxemia, and inflammatory factors.OBJECTIVE: To observe the effects of Gln pretreatment on learning and memory, survival time, and rectal temperature in heat-exposed rats.DESIGN, TIME AND SETTING: The present randomized grouping, neurobehavioral experiment was performed at the Laboratory of Department of Pharmacology, Basic School of Medicine, Wuhan University between March and September 2007.MATERIALS: Twenty-four healthy, Wistar rats were included in this study. SPX-160B biochemistry incubator (Shanghai Experimental Equipment Co., Ltd., China), probe electronic thermometer (11000 type, Maikepai Science and Technology Co., Ltd., China), Y-type maze box used in conjunction with MG-2 maze stimulator (Zhangjiagang Biomedical Instrument Factory, China), L-Gin (Batch No. 061218, 5 g/bottle, prepared into 10% aqueous solution, Amresco Company, USA) were used.METHODS: Twenty-four rats were randomly and evenly divided into 3 groups: heat-exposed, Gln low-lose, and Gln high-dose. Following learning and memory testing with the Y-maze, rats in the heat-exposed group were subjected to heat injury (40.5-41.5℃) in a biochemistry incubator. Rectal temperature was measured every 5 minutes. Thirty-five minutes after heat exposure, rats were removed and placed in the Y-type maze to test learning and memory again. Subsequently, the rats were returned to the same environment of thermal stimulation until they died. Rat survival time was recorded. Subsequent to learning and memory testing, rats in the Gln low-dose and high-dose groups received an i.p. injection of Gln (0.4 g/kg and 0.8 g/kg, respectively), and were exposed to heat injury. The remaining experimental procedures remained the same as for the heat-exposed group.MAIN OUTCOME MEASURES: Rat learning and memory, rectal temperature, and survival time in heat exposure environment.RESULTS: (1) In the Y

  14. Temperature thresholds for surface blistering of platinum and stainless steel exposed to curium-242 alpha radiations

    International Nuclear Information System (INIS)

    McDonell, W.R.; Dillich, S.

    1981-01-01

    Implantation of helium in materials exposed to alpha-emitting radionuclides such as 242 Cm causes surface blistering at elevated temperatures. The temperature thresholds for such blistering are of practical importance to the selection of suitable container materials for radionuclides, and are of fundamental interest with regard to the mechanisms of helium blistering of materials in radiation environments. The purpose of this investigation was to establish temperature thresholds for surface blistering of platinum and stainless-steel container materials by post-irradiation heating of specimens exposed at room temperature to alpha particles from an external 242 Cm source. These thresholds were compared with (1) the analogous temperature thresholds for surface blistering of materials exposed to external beams of accelerator helium ions, and (2) thresholds for swelling and grain-boundary cracking of materials in which helium is generated internally by (n,α) reactions during reactor exposures

  15. Corrosion of Ceramic Materials

    Science.gov (United States)

    Opila, Elizabeth J.; Jacobson, Nathan S.

    1999-01-01

    Non-oxide ceramics are promising materials for a range of high temperature applications. Selected current and future applications are listed. In all such applications, the ceramics are exposed to high temperature gases. Therefore it is critical to understand the response of these materials to their environment. The variables to be considered here include both the type of ceramic and the environment to which it is exposed. Non-oxide ceramics include borides, nitrides, and carbides. Most high temperature corrosion environments contain oxygen and hence the emphasis of this chapter will be on oxidation processes.

  16. Systems and methods for treating material

    Science.gov (United States)

    Scheele, Randall D; McNamara, Bruce K

    2014-10-21

    Systems for treating material are provided that can include a vessel defining a volume, at least one conduit coupled to the vessel and in fluid communication with the vessel, material within the vessel, and NF.sub.3 material within the conduit. Methods for fluorinating material are provided that can include exposing the material to NF.sub.3 to fluorinate at least a portion of the material. Methods for separating components of material are also provided that can include exposing the material to NF.sub.3 to at least partially fluorinate a portion of the material, and separating at least one fluorinated component of the fluorinated portion from the material. The materials exposed to the NF.sub.3 material can include but are not limited to one or more of U, Ru, Rh, Mo, Tc, Np, Pu, Sb, Ag, Am, Sn, Zr, Cs, Th, and/or Rb.

  17. Leukemias in the progeny of exposed parents

    International Nuclear Information System (INIS)

    Kosenko, M.M.; Gudkova, N.V.

    1996-01-01

    The purpose of this study was to assess the incidence of leukemias among the progeny of exposed parents. The parents were exposed as a result of discharge of radioactive waste from the Mayak atomic plant into the Techa river in the Southern Urals. The doses per parents gonads, ranging from 0.035 to 1.27 Sv, were due to external exposure in 1950-1956 and to incorporation of Cs-137. Nine cases with leukemia and four with lympohoma were recorded in 13.500 antenatally exposed subjects and descendants of exposed parents over the period of 1950 to 1988. The leukemia morbidity index for the progeny of exposed parents was 2.51, which virtually not statistically differ from that in control group. Refs. 7, figs. 3, tabs. 3

  18. Eryptosis in lead-exposed workers.

    Science.gov (United States)

    Aguilar-Dorado, Itzel-Citlalli; Hernández, Gerardo; Quintanar-Escorza, Martha-Angelica; Maldonado-Vega, María; Rosas-Flores, Margarita; Calderón-Salinas, José-Víctor

    2014-12-01

    Eryptosis is a physiological phenomenon in which old and damaged erythrocytes are removed from circulation. Erythrocytes incubated with lead have exhibited major eryptosis. In the present work we found evidence of high levels of eryptosis in lead exposed workers possibly via oxidation. Blood samples were taken from 40 male workers exposed to lead (mean blood lead concentration 64.8μg/dl) and non-exposed workers (4.2μg/dl). The exposure to lead produced an intoxication characterized by 88.3% less δ-aminolevulinic acid dehydratase (δALAD) activity in lead exposed workers with respect to non-lead exposed workers. An increment of oxidation in lead exposed workers was characterized by 2.4 times higher thiobarbituric acid-reactive substance (TBARS) concentration and 32.8% lower reduced/oxidized glutathione (GSH/GSSG) ratio. Oxidative stress in erythrocytes of lead exposed workers is expressed in 192% higher free calcium concentration [Ca(2+)]i and 1.6 times higher μ-calpain activity with respect to non-lead exposed workers. The adenosine triphosphate (ATP) concentration was not significantly different between the two worker groups. No externalization of phosphatidylserine (PS) was found in non-lead exposed workers (lead exposed workers showed 2.82% externalization. Lead intoxication induces eryptosis possibly through a molecular pathway that includes oxidation, depletion of reduced glutathione (GSH), increment of [Ca(2+)], μ-calpain activation and externalization of PS in erythrocytes. Identifying molecular signals that induce eryptosis in lead intoxication is necessary to understand its physiopathology and chronic complications. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Sea materials experimental plans

    International Nuclear Information System (INIS)

    1987-07-01

    This Seal Materials Performance Test Plan describes the plan for testing materials that will be used to seal a high-level nuclear waste repository in salt at a proposed site in Deaf Smith County, Texas. The need for sealing and backfilling the repository and the use of various sealing materials are described. The seal materials include mined salt backfills, cementitious bulkheads and plugs, and earthen backfills. The laboratory testing program for characterizing the behavior and performance of these materials is described. This report includes plans for screening materials, evaluating candidate materials to be tested, and testing a representative set of materials

  20. Eryptosis in lead-exposed workers

    International Nuclear Information System (INIS)

    Aguilar-Dorado, Itzel-Citlalli; Hernández, Gerardo; Quintanar-Escorza, Martha-Angelica; Maldonado-Vega, María; Rosas-Flores, Margarita; Calderón-Salinas, José-Víctor

    2014-01-01

    Eryptosis is a physiological phenomenon in which old and damaged erythrocytes are removed from circulation. Erythrocytes incubated with lead have exhibited major eryptosis. In the present work we found evidence of high levels of eryptosis in lead exposed workers possibly via oxidation. Blood samples were taken from 40 male workers exposed to lead (mean blood lead concentration 64.8 μg/dl) and non-exposed workers (4.2 μg/dl). The exposure to lead produced an intoxication characterized by 88.3% less δ-aminolevulinic acid dehydratase (δALAD) activity in lead exposed workers with respect to non-lead exposed workers. An increment of oxidation in lead exposed workers was characterized by 2.4 times higher thiobarbituric acid-reactive substance (TBARS) concentration and 32.8% lower reduced/oxidized glutathione (GSH/GSSG) ratio. Oxidative stress in erythrocytes of lead exposed workers is expressed in 192% higher free calcium concentration [Ca 2+ ] i and 1.6 times higher μ-calpain activity with respect to non-lead exposed workers. The adenosine triphosphate (ATP) concentration was not significantly different between the two worker groups. No externalization of phosphatidylserine (PS) was found in non-lead exposed workers (< 0.1%), but lead exposed workers showed 2.82% externalization. Lead intoxication induces eryptosis possibly through a molecular pathway that includes oxidation, depletion of reduced glutathione (GSH), increment of [Ca 2+ ], μ-calpain activation and externalization of PS in erythrocytes. Identifying molecular signals that induce eryptosis in lead intoxication is necessary to understand its physiopathology and chronic complications. - Graphical abstract: Fig. 1. (A) Blood lead concentration (PbB) and (B) phosphatidylserine externalization on erythrocyte membranes of non-lead exposed (□) and lead exposed workers (■). Values are mean ± SD. *Significantly different (P < 0.001). - Highlights: • Erythrocytes of lead exposed workers showed higher PS

  1. Eryptosis in lead-exposed workers

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar-Dorado, Itzel-Citlalli [Biochemistry Department, Centro de Investigación y Estudios Avanzados IPN, México, DF (Mexico); Hernández, Gerardo [Section of Methodology of Science, Centro de Investigación y Estudios Avanzados IPN, México, DF (Mexico); Quintanar-Escorza, Martha-Angelica [Faculty of Medicine, UJED, Durango, DGO (Mexico); Maldonado-Vega, María [CIATEC, León, GTO (Mexico); Rosas-Flores, Margarita [Biochemistry Department, Centro de Investigación y Estudios Avanzados IPN, México, DF (Mexico); Calderón-Salinas, José-Víctor, E-mail: jcalder@cinvestav.mx [Biochemistry Department, Centro de Investigación y Estudios Avanzados IPN, México, DF (Mexico)

    2014-12-01

    Eryptosis is a physiological phenomenon in which old and damaged erythrocytes are removed from circulation. Erythrocytes incubated with lead have exhibited major eryptosis. In the present work we found evidence of high levels of eryptosis in lead exposed workers possibly via oxidation. Blood samples were taken from 40 male workers exposed to lead (mean blood lead concentration 64.8 μg/dl) and non-exposed workers (4.2 μg/dl). The exposure to lead produced an intoxication characterized by 88.3% less δ-aminolevulinic acid dehydratase (δALAD) activity in lead exposed workers with respect to non-lead exposed workers. An increment of oxidation in lead exposed workers was characterized by 2.4 times higher thiobarbituric acid-reactive substance (TBARS) concentration and 32.8% lower reduced/oxidized glutathione (GSH/GSSG) ratio. Oxidative stress in erythrocytes of lead exposed workers is expressed in 192% higher free calcium concentration [Ca{sup 2+}]{sub i} and 1.6 times higher μ-calpain activity with respect to non-lead exposed workers. The adenosine triphosphate (ATP) concentration was not significantly different between the two worker groups. No externalization of phosphatidylserine (PS) was found in non-lead exposed workers (< 0.1%), but lead exposed workers showed 2.82% externalization. Lead intoxication induces eryptosis possibly through a molecular pathway that includes oxidation, depletion of reduced glutathione (GSH), increment of [Ca{sup 2+}], μ-calpain activation and externalization of PS in erythrocytes. Identifying molecular signals that induce eryptosis in lead intoxication is necessary to understand its physiopathology and chronic complications. - Graphical abstract: Fig. 1. (A) Blood lead concentration (PbB) and (B) phosphatidylserine externalization on erythrocyte membranes of non-lead exposed (□) and lead exposed workers (■). Values are mean ± SD. *Significantly different (P < 0.001). - Highlights: • Erythrocytes of lead exposed workers

  2. 3-Dimensional Agent Representations Increase Generosity in a Naturalistic Setting

    DEFF Research Database (Denmark)

    Krátký, Jan; McGraw, John J.; Xygalatas, Dimitris

    do not always act as deliberative, rational actors. Various studies have investigated the effects of both material cues and complex environmental settings on behavioral choices. One particularly common and salient aspect of the environment involves cues related to intentional agents, whether...... they be our conspecifics, non-human species or supernatural beings. A number of studies have found that exposing participants to cues of agency increase prosocial or cooperative behavior. In two separate studies, we investigated the role dimensionality plays in priming inferences of agency. In contrast...... to previous studies utilizing 2-dimensional images, 3-dimensional representations share morphological elements with real life agents which may enhance the salience of the cues. Higher activation of agency detection, in turn, ought to trigger stronger reputational concerns and thus further amplify prosocial...

  3. UpSet: Visualization of Intersecting Sets

    Science.gov (United States)

    Lex, Alexander; Gehlenborg, Nils; Strobelt, Hendrik; Vuillemot, Romain; Pfister, Hanspeter

    2016-01-01

    Understanding relationships between sets is an important analysis task that has received widespread attention in the visualization community. The major challenge in this context is the combinatorial explosion of the number of set intersections if the number of sets exceeds a trivial threshold. In this paper we introduce UpSet, a novel visualization technique for the quantitative analysis of sets, their intersections, and aggregates of intersections. UpSet is focused on creating task-driven aggregates, communicating the size and properties of aggregates and intersections, and a duality between the visualization of the elements in a dataset and their set membership. UpSet visualizes set intersections in a matrix layout and introduces aggregates based on groupings and queries. The matrix layout enables the effective representation of associated data, such as the number of elements in the aggregates and intersections, as well as additional summary statistics derived from subset or element attributes. Sorting according to various measures enables a task-driven analysis of relevant intersections and aggregates. The elements represented in the sets and their associated attributes are visualized in a separate view. Queries based on containment in specific intersections, aggregates or driven by attribute filters are propagated between both views. We also introduce several advanced visual encodings and interaction methods to overcome the problems of varying scales and to address scalability. UpSet is web-based and open source. We demonstrate its general utility in multiple use cases from various domains. PMID:26356912

  4. Filtration set for gaseous fluids

    International Nuclear Information System (INIS)

    Lebrun, B.; Couvrat-Desvergnes, A.

    1988-01-01

    This filtration set is made by a cylindrical vessel containing upstairs to downstairs, the gas inlet, a sealed floor for man inspection, a horizontal granular filter bed, a linen with a porosity inferior to the granulometry of the filter bed, a light support layer of material of larger granulometry, gas permeable tubes and an annular collector connecting the tubes to the outlet [fr

  5. The properties degradation of exposed GFRP roof

    Science.gov (United States)

    Zainudin, Mohammad; Diharjo, Kuncoro; Kaavessina, Mujtahid; Setyanto, Djoko

    2018-02-01

    There is much consideration of roof selection as a protector of a building against the outside weather, such as lightweight, strong stiff, corrosion resistant and guarantee for the availability of products. Based on these considerations, glass fiber reinforced polymer (GFRP) roof is a roof which can fulfill the requirement. The objective of this research is to investigate the degradation of physical and mechanical properties of GFRP roof exposed in outside weather. This GFRP roof composite was produced using a sheet molding compound (SMC) supplied by PT Intec Persada, Tangerang, Indonesia. There are two kinds GFRP roofs evaluated in this research that are GFRP roof exposed within 7 years and new GFRP roof that has not been exposed. The GFRP roofs were cut manually for preparing the specimens for hardness test, tensile test, SEM and FTIR test. The results show that the GFRP roof exposed within 7 years had the degradation of properties compared to the new GFRP roof. The exposed GFRP roof had lower strength and hardness compared to the new GFRP roof. The SEM observation indicates that exposed GFRP roof had the debonding of fiber on the surface, and in contrast, there are no debonding of fiber in the new GFRP roof surface. It can be recommended that the exposed GFRP roof may be repaired to enhance its performance and can re-increase its properties using the coating.

  6. Effects of volcanic deposit disaggregation on exposed water composition

    Science.gov (United States)

    Back, W. E.; Genareau, K. D.

    2016-12-01

    Explosive volcanic eruptions produce a variety of hazards. Pyroclastic material can be introduced to water through ash fallout, pyroclastic flows entering water bodies, and/or lahars. Remobilization of tephras can occur soon after eruption or centuries later, introducing additional pyroclastic material into the environment. Introduction of pyroclastic material may alter the dissolved element concentration and pH of exposed waters, potentially impacting drinking water supplies, agriculture, and ecology. This study focuses on the long-term impacts of volcanic deposits on water composition due to the mechanical breakup of volcanic deposits over time. Preliminary work has shown that mechanical milling of volcanic deposits will cause significant increases in dissolved element concentrations, conductivity, and pH of aqueous solutions. Pyroclastic material from seven eruptions sites was collected, mechanically milled to produce grain sizes Soufriere Hills, Ruapehu), mafic (Lathrop Wells) and ultramafic (mantle xenoliths) volcanic deposits. Lathrop Wells has an average bulk concentration of 49.15 wt.% SiO2, 6.11 wt. % MgO, and 8.39 wt. % CaO and produces leachate concentrations of 85.69 mg/kg for Ca and 37.22 mg/kg for Mg. Taupo and Valles Caldera samples have a bulk concentration of 72.9 wt.% SiO2, 0.59 wt. % MgO, and 1.48 wt. % CaO, and produces leachate concentrations of 4.08 mg/kg for Ca and 1.56 mg/kg for Mg. Similar testing will be conducted on the intermediate and ultramafic samples to test the hypothesis that bulk magma composition and mineralogy will directly relate to the increased dissolved element concentration of exposed waters. The measured effects on aqueous solutions will aid in evaluation of impacts to marine and freshwater systems exposed to volcanic deposits.

  7. English exposed common mistakes made by Chinese speakers

    CERN Document Server

    Hart, Steve

    2017-01-01

    Having analysed the most common English errors made in over 600 academic papers written by Chinese undergraduates, postgraduates, and researchers, Steve Hart has written an essential, practical guide specifically for the native Chinese speaker on how to write good academic English. English Exposed: Common Mistakes Made by Chinese Speakers is divided into three main sections. The first section examines errors made with verbs, nouns, prepositions, and other grammatical classes of words. The second section focuses on problems of word choice. In addition to helping the reader find the right word, it provides instruction for selecting the right style too. The third section covers a variety of other areas essential for the academic writer, such as using punctuation, adding appropriate references, referring to tables and figures, and selecting among various English date and time phrases. Using English Exposed will allow a writer to produce material where content and ideas-not language mistakes-speak the loudest.

  8. Micronuclei frequency in albino rats exposed to high natural radiation

    International Nuclear Information System (INIS)

    Aneesh, D.; Godwin Wesley, S.

    2013-01-01

    Genotoxicity and DNA damage endpoints are used to evaluate results in the context of cell survival. Genotoxicity in mammalian cells is monitored mostly by using cytokinesis-block micronucleus (CBMN) assay. The score of micronuclei (MN) in peripheral blood lymphocytes can be used as a biomarker and also as a bio-dosimeter of radiation exposure. In the present study the effect of natural radiation on albino rats has been investigated, to find out if there is any increase in MN frequency in peripheral blood lymphocytes. Animals at the age of 2-3 weeks were exposed to natural radiation, at the dose of 10.38 μGyh -1 for a period of 6 months. A parallel control set was also maintained (0.12 μGy h -1 '). Blood samples were collected from both test (exposed to natural radiation) and control rats. Lymphocyte culture was done following 'microculture techniques' for 72 h. Cytochalasin B, at a concentration of 6.0 μg/ml, was added to the lymphocyte cultures at 44 h to block cytokinesis. The frequency of MN was evaluated by scoring a total of 1000 binucleated (BN) cells from one slide. The frequency of MN among the rats exposed to natural radiation was found to be 1.83±0.05 per 1000 BN cells and in the control it was 1.82±0.07 per 1000 BN cells. No statistically significant difference in the MN frequencies of exposed and control groups (p>0.05) was seen. The lower MN frequency in natural radiation exposed rats could be an indication of adaptive response. (author)

  9. 30 CFR 57.19106 - Shaft sets.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Shaft sets. 57.19106 Section 57.19106 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....19106 Shaft sets. Shaft sets shall be kept in good repair and clean of hazardous material. ...

  10. 30 CFR 56.19106 - Shaft sets.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Shaft sets. 56.19106 Section 56.19106 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Shaft sets. Shaft sets shall be kept in good repair and clean of hazardous material. ...

  11. Biological behaviour of buccal cells exposed to blue light

    International Nuclear Information System (INIS)

    Gritsch, Kerstin; Ponsonnet, Laurence; Schembri, Catherine; Farge, Pierre; Pourreyron, Laurence; Grosgogeat, Brigitte

    2008-01-01

    Blue light is used in dental practise to cure resin-based materials, but the path of the light often includes oral tissues such as gingival tissues. While adverse effects of blue light exposure on cells - such as retina cells - are well known, few studies have investigated the impact of blue light exposure on oral cells. The aim of the present in vitro study was to assess the biological effects of blue light emitted by two dental curing devices (a plasma-arc and a light-emitting diode curing unit) on human gingival fibroblasts. Light intensities and light-induced temperature rise were respectively measured with a radiometer and a thermocouple. Cellular response to blue light exposure was assessed by the observation of cell morphology (scanning electron microscopy) and the estimation of cell mitochondrial activity (MTT assay). Light intensities measured at the clinical distance were 488 ± 42 mW/cm 2 for the plasma-arc unit and ranged from 61 ± 5 to 140 ± 16 mW/cm 2 for the light-emitting diodes unit, according to the curing program used. The highest temperature rise was 0.5 and 3.5 deg. C for exposure to the plasma-arc light and to the light-emitting diodes light, respectively. Results showed no differences between exposed- and non-exposed cells in regards to cell morphology. However, cells exposed to blue light presented an increased mitochondrial activity compared to control cells (non-exposed), and mostly those exposed to plasma-arc light

  12. Exploratory Use of Microaerosol Decontamination Technology (PAEROSOL) in Enclosed, Unoccupied Hospital Setting

    Energy Technology Data Exchange (ETDEWEB)

    Rainina, Evguenia I.; McCune, D. E.; Luna, Maria L.; Cook, J. E.; Soltis, Michele A.; Demons, Samandra T.; Godoy-Kain, Patricia; Weston, J. H.

    2012-05-31

    The goal of this study was to validate the previously observed high biological kill performance of PAEROSOL, a semi-dry, micro-aerosol decontamination technology, against common HAI in a non-human subject trial within a hospital setting of Madigan Army Medical Center (MAMC) on Joint Base Lewis-McChord in Tacoma, Washington. In addition to validating the disinfecting efficacy of PAEROSOL, the objectives of the trial included a demonstration of PAEROSOL environmental safety, (i.e., impact to hospital interior materials and electronic equipment exposed during testing) and PAEROSOL parameters optimization for future deployment.

  13. Fuzzy sets, rough sets, multisets and clustering

    CERN Document Server

    Dahlbom, Anders; Narukawa, Yasuo

    2017-01-01

    This book is dedicated to Prof. Sadaaki Miyamoto and presents cutting-edge papers in some of the areas in which he contributed. Bringing together contributions by leading researchers in the field, it concretely addresses clustering, multisets, rough sets and fuzzy sets, as well as their applications in areas such as decision-making. The book is divided in four parts, the first of which focuses on clustering and classification. The second part puts the spotlight on multisets, bags, fuzzy bags and other fuzzy extensions, while the third deals with rough sets. Rounding out the coverage, the last part explores fuzzy sets and decision-making.

  14. On the corrosion and soiling effects on materials by air pollution in Athens, Greece

    Directory of Open Access Journals (Sweden)

    C. Tzanis

    2011-12-01

    Full Text Available In the frame of the European project, entitled MULTI-ASSESS, specimens of structural metals, glass, stone and concrete materials were exposed to air pollution at a station, which was installed for this purpose on a building, located in the centre of Athens. The main purpose of this project was to determine the corrosion and soiling effects of air pollution on materials. A set of the specimens was exposed in a position that was sheltered from rain and partly from wind, and another set was exposed in unsheltered positions on the roof of the above said building. In addition, other specimens were exposed at different heights on the same building, in order to investigate for the first time the corrosion and soiling effects on various materials as a function of height. For the determination of these effects, chemical analysis of the specimens was performed and basic parameters as the weight change, the layer thickness and the optical properties were calculated. Finally, the results obtained are discussed and their plausible interpretation is attempted.

  15. Exposing Latent Information in Folksonomies for Reasoning

    Science.gov (United States)

    2010-01-14

    1.73 $.") http://www.w3.org/2006/07/SWD/ SKOS /reference/20081001/ Spiteri, L.F. (2007) "The structure and form of folksonomy tags: The road to the...Exposing Latent Information in Folksonomies for Reasoning January 14, 2010 Sponsored by Defense Advanced Research Projects Agency (DOD...DATES COVERED (From - To! 4/14/2009-12/23/2009 4. TITLE AND SUBTITLE Exposing Latent Information in Folksonomies for Reasoning Sa. CONTRACT

  16. Cast Stone Oxidation Front Evaluation: Preliminary Results For Samples Exposed To Moist Air

    International Nuclear Information System (INIS)

    Langton, C. A.; Almond, P. M.

    2013-01-01

    (depth to which soluble Cr was detected) for the Cast Stone sample exposed for 68 days to ambient outdoor temperatures and humid air (total age of sample was 131 days) was determined to be about 35 mm below the top sample surface exposed. The Tc oxidation front, depth at which Tc was insoluble, was not determined. Interpretation of the results indicates that the oxidation front is at least 38 mm below the exposed surface. The sample used for this measurement was exposed to ambient laboratory conditions and humid air for 50 days. The total age of the sample was 98 days. Technetium appears to be more easily oxidized than Cr in the Cast Stone matrix. The oxidized forms of Tc and Cr are soluble and therefore leachable. Longer exposure times are required for both the Cr and Tc spiked samples to better interpret the rate of oxidation. Tc spiked subsamples need to be taken further from the exposed surface to better define and interpret the leachable Tc profile. Finally Tc(VII) reduction to Tc(IV) appears to occur relatively fast. Results demonstrated that about 95 percent of the Tc(VII) was reduced to Tc(IV) during the setting and very early stage setting for a Cast Stone sample cured 10 days. Additional testing at longer curing times is required to determine whether additional time is required to reduce 100% of the Tc(VII) in Cast Stone or whether the Tc loading exceeded the ability of the waste form to reduce 100% of the Tc(VII). Additional testing is required for samples cured for longer times. Depth discrete subsampling in a nitrogen glove box is also required to determine whether the 5 percent Tc extracted from the subsamples was the result of the sampling process which took place in air. Reduction capacity measurements (per the Angus-Glasser method) performed on depth discrete samples could not be correlated with the amount of chromium or technetium leached from the depth discrete subsamples or with the oxidation front inferred from soluble chromium and technetium (i

  17. Energy response of an imaging plate exposed to standard beta sources

    International Nuclear Information System (INIS)

    Gonzalez, A.L.; Li, H.; Mitch, M.; Tolk, N.; Duggan, D.M.

    2002-01-01

    Imaging plates (IPs) are a reusable media, which when exposed to ionizing radiation, store a latent image that can be read out with a red laser as photostimulated luminescence (PSL). They are widely used as a substitute for X-ray films for diagnostic studies. In diagnostic radiology this technology is known as computed radiography. In this work, the energy response of a commercial IP to beta-particle reference radiation fields used for calibrations at the National Institute of Standards and Technology was investigated. The absorbed dose in the active storage phosphor layer was calculated following the scaling procedure for depth dose for high Z materials with reference to water. It was found that the beta particles from Pm-147 and Kr-85 gave 68% and 24% higher PSL responses than that induced by Sr-90, respectively, which was caused by the different PSL detection efficiencies. In addition, normalized response curves of the IPs as a function of depth in polystyrene were measured and compared with the data measured using extrapolation chamber techniques. The difference between both sets of data resulted from the continuous energy change as the beta particle travels across the material, which leads to a different PSL response

  18. Standard practice for exposing and evaluating metals and alloys in surface seawater

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2000-01-01

    1.1 This practice covers conditions for the exposure of metals, alloys, and other materials in natural surface seawater such as those typically found in bays, harbors, channels, and so forth, as contrasted with deep ocean testing. This practice covers full immersion, tidal zone and related splash, and spray zone exposures. 1.2 This practice sets forth general procedures that should be followed in conducting seawater exposure tests so that meaningful comparisons may be made from one location to another. 1.3 This practice identifies recommended procedures for evaluating the effects of natural surface seawater on the materials exposed. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regula...

  19. 49 CFR 173.194 - Gas identification sets.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Gas identification sets. 173.194 Section 173.194... Gas identification sets. Gas identification sets containing poisonous material must be packaged in... silical gel, gas identification sets may be shipped as follows: (1) If the poisonous material does not...

  20. Test Method for Spalling of Fire Exposed Concrete

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt

    2005-01-01

    A new material test method is presented for determining whether or not an actual concrete may suffer from explosive spalling at a specified moisture level. The method takes into account the effect of stresses from hindered thermal expansion at the fire-exposed surface. Cylinders are used, which...... in many countries serve as standard specimens for testing the compressive strength. Consequently, the method is quick, cheap and easy to use in comparison to the alternative of testing full-scale or semi full-scale structures with correct humidity, load and boundary conditions. A number of concretes have...

  1. A Sink-driven Approach to Detecting Exposed Component Vulnerabilities in Android Apps

    OpenAIRE

    Wu, Daoyuan; Luo, Xiapu; Chang, Rocky K. C.

    2014-01-01

    Android apps could expose their components for cooperating with other apps. This convenience, however, makes apps susceptible to the exposed component vulnerability (ECV), in which a dangerous API (commonly known as sink) inside its component can be triggered by other (malicious) apps. In the prior works, detecting these ECVs use a set of sinks pertaining to the ECVs under detection. In this paper, we argue that a more comprehensive and effective approach should start by a systematic selectio...

  2. Ethanol emission from loose corn silage and exposed silage particles

    Science.gov (United States)

    Hafner, Sasha D.; Montes, Felipe; Rotz, C. Alan; Mitloehner, Frank

    2010-11-01

    Silage on dairy farms has been identified as a major source of volatile organic compound (VOC) emissions. However, rates of VOC emission from silage are not accurately known. In this work, we measured ethanol (a dominant silage VOC) emission from loose corn silage and exposed corn silage particles using wind tunnel systems. Flux of ethanol was highest immediately after exposing loose silage samples to moving air (as high as 220 g m -2 h -1) and declined by as much as 76-fold over 12 h as ethanol was depleted from samples. Emission rate and cumulative 12 h emission increased with temperature, silage permeability, exposed surface area, and air velocity over silage samples. These responses suggest that VOC emission from silage on farms is sensitive to climate and management practices. Ethanol emission rates from loose silage were generally higher than previous estimates of total VOC emission rates from silage and mixed feed. For 15 cm deep loose samples, mean cumulative emission was as high as 170 g m -2 (80% of initial ethanol mass) after 12 h of exposure to an air velocity of 5 m s -1. Emission rates measured with an emission isolation flux chamber were lower than rates measured in a wind tunnel and in an open setting. Results show that the US EPA emission isolation flux chamber method is not appropriate for estimating VOC emission rates from silage in the field.

  3. Studies of workers exposed to low doses of external radiation

    International Nuclear Information System (INIS)

    Gilbert, E.S.

    1991-04-01

    Currently, several epidemiologic studies of workers who have been exposed occupationally to low levels of radiation are being conducted, and include studies of workers in the United States, Great Britain, and Canada involved in the production of both defense materials and nuclear power. This paper focuses on studies that evaluate the possible adverse effects resulting from external exposure to radiation. The radiation risk estimates that have been used to establish radiation protection standards for workers and others have been obtained mainly from studies of persons exposed at high doses and dose rates. However, questions remain with regard to the extrapolation process that has been necessary for estimating low-level radiation risks. Occupational studies provide a direct assessment of risk based on data on persons exposed at the actual levels of interest. If current risk estimates are correct, these studies have very little chance of detecting risk, but can still be used to provide useful upper limits on risks. The studies are also adequate to detect serious underestimation of risks. 36 refs., 3 figs., 3 tabs

  4. SETS reference manual

    International Nuclear Information System (INIS)

    Worrell, R.B.

    1985-05-01

    The Set Equation Transformation System (SETS) is used to achieve the symbolic manipulation of Boolean equations. Symbolic manipulation involves changing equations from their original forms into more useful forms - particularly by applying Boolean identities. The SETS program is an interpreter which reads, interprets, and executes SETS user programs. The user writes a SETS user program specifying the processing to be achieved and submits it, along with the required data, for execution by SETS. Because of the general nature of SETS, i.e., the capability to manipulate Boolean equations regardless of their origin, the program has been used for many different kinds of analysis

  5. Setting the scene

    International Nuclear Information System (INIS)

    Curran, S.

    1977-01-01

    The reasons for the special meeting on the breeder reactor are outlined with some reference to the special Scottish interest in the topic. Approximately 30% of the electrical energy generated in Scotland is nuclear and the special developments at Dounreay make policy decisions on the future of the commercial breeder reactor urgent. The participants review the major questions arising in arriving at such decisions. In effect an attempt is made to respond to the wish of the Secretary of State for Energy to have informed debate. To set the scene the importance of energy availability as regards to the strength of the national economy is stressed and the reasons for an increasing energy demand put forward. Examination of alternative sources of energy shows that none is definitely capable of filling the foreseen energy gap. This implies an integrated thermal/breeder reactor programme as the way to close the anticipated gap. The problems of disposal of radioactive waste and the safeguards in the handling of plutonium are outlined. Longer-term benefits, including the consumption of plutonium and naturally occurring radioactive materials, are examined. (author)

  6. Toxicity of lunar dust assessed in inhalation-exposed rats.

    Science.gov (United States)

    Lam, Chiu-wing; Scully, Robert R; Zhang, Ye; Renne, Roger A; Hunter, Robert L; McCluskey, Richard A; Chen, Bean T; Castranova, Vincent; Driscoll, Kevin E; Gardner, Donald E; McClellan, Roger O; Cooper, Bonnie L; McKay, David S; Marshall, Linda; James, John T

    2013-10-01

    Humans will again set foot on the moon. The moon is covered by a layer of fine dust, which can pose a respiratory hazard. We investigated the pulmonary toxicity of lunar dust in rats exposed to 0, 2.1, 6.8, 20.8 and 60.6 mg/m(3) of respirable-size lunar dust for 4 weeks (6 h/day, 5 days/week); the aerosols in the nose-only exposure chambers were generated from a jet-mill ground preparation of a lunar soil collected during the Apollo 14 mission. After 4 weeks of exposure to air or lunar dust, groups of five rats were euthanized 1 day, 1 week, 4 weeks or 13 weeks after the last exposure for assessment of pulmonary toxicity. Biomarkers of toxicity assessed in bronchoalveolar fluids showed concentration-dependent changes; biomarkers that showed treatment effects were total cell and neutrophil counts, total protein concentrations and cellular enzymes (lactate dehydrogenase, glutamyl transferase and aspartate transaminase). No statistically significant differences in these biomarkers were detected between rats exposed to air and those exposed to the two low concentrations of lunar dust. Dose-dependent histopathology, including inflammation, septal thickening, fibrosis and granulomas, in the lung was observed at the two higher exposure concentrations. No lesions were detected in rats exposed to ≤6.8 mg/m(3). This 4-week exposure study in rats showed that 6.8 mg/m(3) was the highest no-observable-adverse-effect level (NOAEL). These results will be useful for assessing the health risk to humans of exposure to lunar dust, establishing human exposure limits and guiding the design of dust mitigation systems in lunar landers or habitats.

  7. Genetic Alterations in Pesticide Exposed Bolivian Farmers

    DEFF Research Database (Denmark)

    Jørs, Erik; González, Ana Rosa; Ascarrunz, Maria Eugenia

    2007-01-01

    : Questionnaires were applied and blood tests taken from 81 volunteers from La Paz County, of whom 48 were pesticide exposed farmers and 33 non-exposed controls. Sixty males and 21 females participated with a mean age of 37.3 years (range 17-76). Data of exposure and possible genetic damage were collected...... and evaluated by well known statistical methods, controlling for relevant confounders. To measure genetic damage chromosomal aberrations and the comet assay analysis were performed. Results: Pesticide exposed farmers had a higher degree of genetic damage compared to the control group. The number of chromosomal......, probably related to exposure to pesticides. Due to the potentially negative long term health effects of genetic damage on reproduction and the development of cancer, preventive measures are recommended. Effective control with imports and sales, banning of the most toxic pesticides, education...

  8. Proximally exposed A-bomb survivors. 2

    International Nuclear Information System (INIS)

    Kamada, Nanao

    1992-01-01

    Methods for observing chromosomes can be chronologically divided into the era of non-differential staining technique (1962-1975) and the era of differential staining method (since 1976). This paper reviews the literature of chromosomal aberrations in bone marrow cells found in the two eras. Findings during the era of 1962-1975 include the frequency of chromosomal aberrations in bone marrow cells, comparison of chromosomal aberrations in bone marrow cells and T lymphocytes, and annual variation of chromosomal aberrations. The frequency of chromosomal aberrations was high in proximally exposed A-bomb survivors (90.5% and 52.6% in A-bomb survivors exposed within 500 m and at 501-1,000 m, respectively); on the contrary, it was low in those exposed far from 1,000 m (6.2% or less). The frequency of chromosomal aberrations in bone marrow cells was lower than that in T lymphocytes (21.5% vs 27.1% in those exposed within 500 m and 14.1% vs 23% in those exposed at 501-1,000 m). Annual analysis for chromosomal aberrations has shown the somewhat dependence upon medullary hematopoiesis and virus infection. The advent of differential staining technique since 1976 has made it possible to clarify the type of chromosomal aberrations and site of breakage. Of 710 bone marrow cells taken from 13 A-bomb survivors exposed within 1,000 m, 121 cells (from 11 A-bomb survivors) exhibited chromosomal aberrations. In differential staining analysis, all 121 cells but one were found to be of stable type, such as translocation and inversion. Furthermore, the site of breakage was found to be non-randomly distributed. Analysis of chromosomal aberrations in bone marrow cells has advantages of reflecting dynamic condition of these cells and determining gradual progression into leukemia. (N.K.)

  9. First result of deuterium retention in neutron-irradiated tungsten exposed to high flux plasma in TPE

    International Nuclear Information System (INIS)

    Shimada, Masashi; Hatano, Y.; Calderoni, P.; Oda, T.; Oya, Y.; Sokolov, M.; Zhang, K.; Cao, G.; Kolasinski, R.; Sharpe, J.P.

    2011-01-01

    With the Japan-US joint research project Tritium, Irradiations, and Thermofluids for America and Nippon (TITAN), an initial set of tungsten samples (99.99% purity, A.L.M.T. Co.) were irradiated by high flux neutrons at 323 K to 0.025 dpa in High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). Subsequently, one of the neutron-irradiated tungsten samples was exposed to a high-flux deuterium plasma (ion flux: 5 x 10 21 m -2 s -1 , ion fluence: 4 x 10 25 m -2 ) in the Tritium Plasma Experiment (TPE) at Idaho National Laboratory (INL). The deuterium retention in the neutron-irradiated tungsten was 40% higher in comparison to the unirradiated tungsten. The observed broad desorption spectrum from neutron-irradiated tungsten and associated TMAP modeling of the deuterium release suggest that trapping occurs in the bulk material at more than three different energy sites.

  10. First result of deuterium retention in neutron-irradiated tungsten exposed to high flux plasma in TPE

    Science.gov (United States)

    Shimada, Masashi; Hatano, Y.; Calderoni, P.; Oda, T.; Oya, Y.; Sokolov, M.; Zhang, K.; Cao, G.; Kolasinski, R.; Sharpe, J. P.

    2011-08-01

    With the Japan-US joint research project Tritium, Irradiations, and Thermofluids for America and Nippon (TITAN), an initial set of tungsten samples (99.99% purity, A.L.M.T. Co.) were irradiated by high flux neutrons at 323 K to 0.025 dpa in High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). Subsequently, one of the neutron-irradiated tungsten samples was exposed to a high-flux deuterium plasma (ion flux: 5 × 1021 m-2 s-1, ion fluence: 4 × 1025 m-2) in the Tritium Plasma Experiment (TPE) at Idaho National Laboratory (INL). The deuterium retention in the neutron-irradiated tungsten was 40% higher in comparison to the unirradiated tungsten. The observed broad desorption spectrum from neutron-irradiated tungsten and associated TMAP modeling of the deuterium release suggest that trapping occurs in the bulk material at more than three different energy sites.

  11. Three novel triazine-based materials with different O/S/N set of donor atoms: One-step preparation and comparison of their capability in selective separation of uranium

    International Nuclear Information System (INIS)

    Bai, Chiyao; Zhang, Meicheng; Li, Bo; Tian, Yin; Zhang, Shuang; Zhao, Xiaosheng; Li, Yang; Wang, Lei; Ma, Lijian; Li, Shoujian

    2015-01-01

    Highlights: • Three novel functional covalent triazine-based frameworks are prepared. • Synthesis and functionalization of the products are accomplished in one step. • Various adsorbents can be prepared using cyanuric chloride as a core skeleton. • The products have high N concentration, regular structures, and high stabilities. • The products exhibit high sorption capacities and distinct selectivity for U (VI). - Abstract: Cyanuric chloride was chosen as a core skeleton which reacted with desired linker molecules, urea, thiourea and thiosemicarbazide, to prepare three novel functional covalent triazine-based frameworks, CCU (O-donor set), CCTU (S-donor set) and CCTS (S, N-donor set) respectively, designed for selective adsorption of U(VI). The products have high nitrogen concentration (>30 wt%), regular structure, relatively high chemical and thermal stability. Adsorption behaviors of the products on U(VI) were examined by batch experiments. CCU and CCTU can extract U(VI) from simulated nuclear industrial effluent containing 12 co-existing cations with relatively high selectivity (54.4% and 54.2%, respectively). Especially, effects of donor atoms O/S on adsorption were investigated, and the outcomes indicate that the difference in coordinating ability between the donor atoms is weakened in large conjugated systems, and the related functional groups with originally very strong coordination abilities may not be the best choice for the application in selective adsorption of uranium and also other metals. The as-proposed approach can easily be expanded into design and preparation of new highly efficient adsorbents for selective separation and recovery of uranium through adjusting the structures, types and amounts of functional groups of adsorbents by choosing suitable linkers.

  12. Sets in Coq, Coq in Sets

    Directory of Open Access Journals (Sweden)

    Bruno Barras

    2010-01-01

    Full Text Available This work is about formalizing models of various type theories of the Calculus of Constructions family. Here we focus on set theoretical models. The long-term goal is to build a formal set theoretical model of the Calculus of Inductive Constructions, so we can be sure that Coq is consistent with the language used by most mathematicians.One aspect of this work is to axiomatize several set theories: ZF possibly with inaccessible cardinals, and HF, the theory of hereditarily finite sets. On top of these theories we have developped a piece of the usual set theoretical construction of functions, ordinals and fixpoint theory. We then proved sound several models of the Calculus of Constructions, its extension with an infinite hierarchy of universes, and its extension with the inductive type of natural numbers where recursion follows the type-based termination approach.The other aspect is to try and discharge (most of these assumptions. The goal here is rather to compare the theoretical strengths of all these formalisms. As already noticed by Werner, the replacement axiom of ZF in its general form seems to require a type-theoretical axiom of choice (TTAC.

  13. Material laws for room temperature and high temperature, automatic adaptation to experimental data sets and applications to components under multiaxial stress; Stoffgesetze fuer Raum- und Hochtemperatur, automatisierte Anpassung an experimentelle Datensaetze und Anwendungen auf mehrachsig belastete Komponenten

    Energy Technology Data Exchange (ETDEWEB)

    Mohrmann, R.

    1998-12-01

    Models of materials mechanics were applied and improved, and a universal method for adapting the model parameters was developed. Measurements of several steels were processed by this method. The efficiency of the models and method was established by a comparison with measurements of components under multiaxial stress and components with FEA predictions. [German] Im Rahmen dieser Arbeit wurden werkstoffmechanische Modelle angewendet und weiterentwickelt. Fuer diese Modelle wurde eine universelle Methode zur Anpassung der Modellparameter entwickelt. Es wurden Messergebnisse verschiedener Stahlwerkstoffe mit dieser Methode bearbeitet. Die Leistungsfaehigkeit der untersuchten Modelle bzw. der entwickelten Methode wurde durch den Vergleich von Messergebnissen mehrachsig belasteter Komponenten bzw. Bauteilen mit Finite-Element Vorhersagen nachgewiesen. (orig.)

  14. Dictionary materials engineering, materials testing

    International Nuclear Information System (INIS)

    1994-01-01

    This dictionary contains about 9,500 entries in each part of the following fields: 1) Materials using and selection; 2) Mechanical engineering materials -Metallic materials - Non-metallic inorganic materials - Plastics - Composites -Materials damage and protection; 3) Electrical and electronics materials -Conductor materials - Semiconductors - magnetic materials - Dielectric materials - non-conducting materials; 4) Materials testing - Mechanical methods - Analytical methods - Structure investigation - Complex methods - Measurement of physical properties - Non-destructive testing. (orig.) [de

  15. Invariant sets for Windows

    CERN Document Server

    Morozov, Albert D; Dragunov, Timothy N; Malysheva, Olga V

    1999-01-01

    This book deals with the visualization and exploration of invariant sets (fractals, strange attractors, resonance structures, patterns etc.) for various kinds of nonlinear dynamical systems. The authors have created a special Windows 95 application called WInSet, which allows one to visualize the invariant sets. A WInSet installation disk is enclosed with the book.The book consists of two parts. Part I contains a description of WInSet and a list of the built-in invariant sets which can be plotted using the program. This part is intended for a wide audience with interests ranging from dynamical

  16. Plastic Recycling Experiments in Materials Education

    Science.gov (United States)

    Liu, Ping; Waskom, Tommy L.

    1996-01-01

    The objective of this project was to introduce a series of plastic recycling experiments to students in materials-related courses such as materials science, material technology and materials testing. With the plastic recycling experiments, students not only can learn the fundamentals of plastic processing and properties as in conventional materials courses, but also can be exposed to the issue of materials life cycle and the impact on society and environment.

  17. Thermoelectric Materials

    Science.gov (United States)

    Gao, Peng; Berkun, Isil; Schmidt, Robert D.; Luzenski, Matthew F.; Lu, Xu; Bordon Sarac, Patricia; Case, Eldon D.; Hogan, Timothy P.

    2014-06-01

    Mg2(Si,Sn) compounds are promising candidate low-cost, lightweight, nontoxic thermoelectric materials made from abundant elements and are suited for power generation applications in the intermediate temperature range of 600 K to 800 K. Knowledge on the transport and mechanical properties of Mg2(Si,Sn) compounds is essential to the design of Mg2(Si,Sn)-based thermoelectric devices. In this work, such materials were synthesized using the molten-salt sealing method and were powder processed, followed by pulsed electric sintering densification. A set of Mg2.08Si0.4- x Sn0.6Sb x (0 ≤ x ≤ 0.072) compounds were investigated, and a peak ZT of 1.50 was obtained at 716 K in Mg2.08Si0.364Sn0.6Sb0.036. The high ZT is attributed to a high electrical conductivity in these samples, possibly caused by a magnesium deficiency in the final product. The mechanical response of the material to stresses is a function of the elastic moduli. The temperature-dependent Young's modulus, shear modulus, bulk modulus, Poisson's ratio, acoustic wave speeds, and acoustic Debye temperature of the undoped Mg2(Si,Sn) compounds were measured using resonant ultrasound spectroscopy from 295 K to 603 K. In addition, the hardness and fracture toughness were measured at room temperature.

  18. Exposing the Mathematical Wizard: Approximating Trigonometric Functions

    Science.gov (United States)

    Gordon, Sheldon P.

    2011-01-01

    For almost all students, what happens when they push buttons on their calculators is essentially magic, and the techniques used are seemingly pure wizardry. In this article, the author draws back the curtain to expose some of the mathematics behind computational wizardry and introduces some fundamental ideas that are accessible to precalculus…

  19. Exposing Library Services with AngularJS

    OpenAIRE

    Jakob Voß; Moritz Horn

    2014-01-01

    This article provides an introduction to the JavaScript framework AngularJS and specific AngularJS modules for accessing library services. It shows how information such as search suggestions, additional links, and availability can be embedded in any website. The ease of reuse may encourage more libraries to expose their services via standard APIs to allow usage in different contexts.

  20. Expose Mechanical Engineering Students to Biomechanics Topics

    Science.gov (United States)

    Shen, Hui

    2011-01-01

    To adapt the focus of engineering education to emerging new industries and technologies nationwide and in the local area, a biomechanics module has been developed and incorporated into a mechanical engineering technical elective course to expose mechanical engineering students at ONU (Ohio Northern University) to the biomedical engineering topics.…

  1. Stabilizer for seismically exposed bridge cranes

    International Nuclear Information System (INIS)

    Engelke, M.; Kuhr, H.

    1982-01-01

    The invention concerns a stabilizer for seismically exposed bridge cranes in reactor buildings. The trolley and the crane bridge are fitted with the stabilizer consisting of a bipartite safety catch which is connected with a joint and able to take up the vertical loads during an earthquake. This stabilizer is suitable for all kinds of bridge cranes operated in seismically active regions

  2. Dose coefficients for individual occupationally exposed

    International Nuclear Information System (INIS)

    2005-11-01

    This Regulation refers to the requirements of the Regulation CNEN-NN.3.01, 'Basic Act of Radiological Protection', aiming its application to the dose calculation, with purposes of conformity verification with limits and restrictions of doses and level of reference for individual occupationally exposed, according to the express in its section 5

  3. A new level set model for multimaterial flows

    Energy Technology Data Exchange (ETDEWEB)

    Starinshak, David P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Karni, Smadar [Univ. of Michigan, Ann Arbor, MI (United States). Dept. of Mathematics; Roe, Philip L. [Univ. of Michigan, Ann Arbor, MI (United States). Dept. of AerospaceEngineering

    2014-01-08

    We present a new level set model for representing multimaterial flows in multiple space dimensions. Instead of associating a level set function with a specific fluid material, the function is associated with a pair of materials and the interface that separates them. A voting algorithm collects sign information from all level sets and determines material designations. M(M ₋1)/2 level set functions might be needed to represent a general M-material configuration; problems of practical interest use far fewer functions, since not all pairs of materials share an interface. The new model is less prone to producing indeterminate material states, i.e. regions claimed by more than one material (overlaps) or no material at all (vacuums). It outperforms existing material-based level set models without the need for reinitialization schemes, thereby avoiding additional computational costs and preventing excessive numerical diffusion.

  4. A spatiotemporal optimization model for the evacuation of the population exposed to flood hazard

    Science.gov (United States)

    Alaeddine, H.; Serrhini, K.; Maizia, M.

    2015-03-01

    Managing the crisis caused by natural disasters, and especially by floods, requires the development of effective evacuation systems. An effective evacuation system must take into account certain constraints, including those related to traffic network, accessibility, human resources and material equipment (vehicles, collecting points, etc.). The main objective of this work is to provide assistance to technical services and rescue forces in terms of accessibility by offering itineraries relating to rescue and evacuation of people and property. We consider in this paper the evacuation of an urban area of medium size exposed to the hazard of flood. In case of inundation, most people will be evacuated using their own vehicles. Two evacuation types are addressed in this paper: (1) a preventive evacuation based on a flood forecasting system and (2) an evacuation during the disaster based on flooding scenarios. The two study sites on which the developed evacuation model is applied are the Tours valley (Fr, 37), which is protected by a set of dikes (preventive evacuation), and the Gien valley (Fr, 45), which benefits from a low rate of flooding (evacuation before and during the disaster). Our goal is to construct, for each of these two sites, a chronological evacuation plan, i.e., computing for each individual the departure date and the path to reach the assembly point (also called shelter) according to a priority list established for this purpose. The evacuation plan must avoid the congestion on the road network. Here we present a spatiotemporal optimization model (STOM) dedicated to the evacuation of the population exposed to natural disasters and more specifically to flood risk.

  5. A spatio-temporel optimization model for the evacuation of the population exposed to natural disasters

    Science.gov (United States)

    Alaeddine, H.; Serrhini, K.; Maïzia, M.; Néron, E.

    2015-01-01

    The importance of managing the crisis caused by natural disasters, and especially by flood, requires the development of an effective evacuation systems. An effective evacuation system must take into account certain constraints, including those related to network traffic, accessibility, human resources and material equipment (vehicles, collecting points, etc.). The main objective of this work is to provide assistance to technical services and rescue forces in terms of accessibility by offering itineraries relating to rescue and evacuation of people and property. We consider in this paper the evacuation of an urban area of medium size exposed to the hazard of flood. In case of inundation, most people will be evacuated using their own vehicles. Two evacuation types are addressed in this paper, (1) a preventive evacuation based on a flood forecasting system and (2) an evacuation during the disaster based on flooding scenarios. The two study sites on which the evacuation model developed is applied are the valley of Tours (Fr, 37) which is protected by a set of dikes (preventive evacuation) and the valley of Gien (Fr, 45) which benefits of a low rate of flooding (evacuation before and during the disaster). Our goal is to construct, for each of these two sites, a chronological evacuation plan i.e. computing for each individual the departure date and the path to reach the assembly point (also called shelter) associated according to a priorities list established for this purpose. Evacuation plan must avoid the congestion on the road network. Here we present a Spatio-Temporal Optimization Model (STOM) dedicated to the evacuation of the population exposed to natural disasters and more specifically to flood risk.

  6. Value Set Authority Center

    Data.gov (United States)

    U.S. Department of Health & Human Services — The VSAC provides downloadable access to all official versions of vocabulary value sets contained in the 2014 Clinical Quality Measures (CQMs). Each value set...

  7. Settings for Suicide Prevention

    Science.gov (United States)

    ... Suicide Populations Racial/Ethnic Groups Older Adults Adolescents LGBT Military/Veterans Men Effective Prevention Comprehensive Approach Identify ... Based Prevention Settings American Indian/Alaska Native Settings Schools Colleges and Universities Primary Care Emergency Departments Behavioral ...

  8. Fibrosis biomarkers in workers exposed to MWCNTs

    International Nuclear Information System (INIS)

    Fatkhutdinova, Liliya M.; Khaliullin, Timur O.; Vasil'yeva, Olga L.; Zalyalov, Ramil R.; Mustafin, Ilshat G.; Kisin, Elena R.; Birch, M. Eileen; Yanamala, Naveena; Shvedova, Anna A.

    2016-01-01

    Multi-walled carbon nanotubes (MWCNT) with their unique physico-chemical properties offer numerous technological advantages and are projected to drive the next generation of manufacturing growth. As MWCNT have already found utility in different industries including construction, engineering, energy production, space exploration and biomedicine, large quantities of MWCNT may reach the environment and inadvertently lead to human exposure. This necessitates the urgent assessment of their potential health effects in humans. The current study was carried out at NanotechCenter Ltd. Enterprise (Tambov, Russia) where large-scale manufacturing of MWCNT along with relatively high occupational exposure levels was reported. The goal of this small cross-sectional study was to evaluate potential biomarkers during occupational exposure to MWCNT. All air samples were collected at the workplaces from both specific areas and personal breathing zones using filter-based devices to quantitate elemental carbon and perform particle analysis by TEM. Biological fluids of nasal lavage, induced sputum and blood serum were obtained from MWCNT-exposed and non-exposed workers for assessment of inflammatory and fibrotic markers. It was found that exposure to MWCNTs caused significant increase in IL-1β, IL6, TNF-α, inflammatory cytokines and KL-6, a serological biomarker for interstitial lung disease in collected sputum samples. Moreover, the level of TGF-β1 was increased in serum obtained from young exposed workers. Overall, the results from this study revealed accumulation of inflammatory and fibrotic biomarkers in biofluids of workers manufacturing MWCNTs. Therefore, the biomarkers analyzed should be considered for the assessment of health effects of occupational exposure to MWCNT in cross-sectional epidemiological studies. - Highlights: • The effects of MWCNT exposure in humans remain unclear. • We found increased KL-6/TGF-β levels in the biofluids of MWCNT-exposed workers.

  9. Fibrosis biomarkers in workers exposed to MWCNTs

    Energy Technology Data Exchange (ETDEWEB)

    Fatkhutdinova, Liliya M., E-mail: liliya.fatkhutdinova@gmail.com [Kazan State Medical University, ul. Butlerova 49, Kazan 420012 (Russian Federation); Khaliullin, Timur O., E-mail: Khaliullin.40k@gmail.com [Kazan State Medical University, ul. Butlerova 49, Kazan 420012 (Russian Federation); Department of Physiology & Pharmacology, WVU, Morgantown, WV (United States); Vasil' yeva, Olga L., E-mail: volgaleon@gmail.com [Kazan State Medical University, ul. Butlerova 49, Kazan 420012 (Russian Federation); Zalyalov, Ramil R., E-mail: zalyalov.ramil@gmail.com [Kazan State Medical University, ul. Butlerova 49, Kazan 420012 (Russian Federation); Mustafin, Ilshat G., E-mail: ilshat64@mail.ru [Kazan State Medical University, ul. Butlerova 49, Kazan 420012 (Russian Federation); Kisin, Elena R., E-mail: edk8@cdc.gov [National Institute for Occupational Safety and Health, Morgantown, WV (United States); Birch, M. Eileen, E-mail: mib2@cdc.gov [National Institute for Occupational Safety and Health, Cincinnati, OH (United States); Yanamala, Naveena, E-mail: wqu1@cdc.gov [National Institute for Occupational Safety and Health, Morgantown, WV (United States); Shvedova, Anna A., E-mail: ats1@cdc.gov [National Institute for Occupational Safety and Health, Morgantown, WV (United States); Department of Physiology & Pharmacology, WVU, Morgantown, WV (United States)

    2016-05-15

    Multi-walled carbon nanotubes (MWCNT) with their unique physico-chemical properties offer numerous technological advantages and are projected to drive the next generation of manufacturing growth. As MWCNT have already found utility in different industries including construction, engineering, energy production, space exploration and biomedicine, large quantities of MWCNT may reach the environment and inadvertently lead to human exposure. This necessitates the urgent assessment of their potential health effects in humans. The current study was carried out at NanotechCenter Ltd. Enterprise (Tambov, Russia) where large-scale manufacturing of MWCNT along with relatively high occupational exposure levels was reported. The goal of this small cross-sectional study was to evaluate potential biomarkers during occupational exposure to MWCNT. All air samples were collected at the workplaces from both specific areas and personal breathing zones using filter-based devices to quantitate elemental carbon and perform particle analysis by TEM. Biological fluids of nasal lavage, induced sputum and blood serum were obtained from MWCNT-exposed and non-exposed workers for assessment of inflammatory and fibrotic markers. It was found that exposure to MWCNTs caused significant increase in IL-1β, IL6, TNF-α, inflammatory cytokines and KL-6, a serological biomarker for interstitial lung disease in collected sputum samples. Moreover, the level of TGF-β1 was increased in serum obtained from young exposed workers. Overall, the results from this study revealed accumulation of inflammatory and fibrotic biomarkers in biofluids of workers manufacturing MWCNTs. Therefore, the biomarkers analyzed should be considered for the assessment of health effects of occupational exposure to MWCNT in cross-sectional epidemiological studies. - Highlights: • The effects of MWCNT exposure in humans remain unclear. • We found increased KL-6/TGF-β levels in the biofluids of MWCNT-exposed workers.

  10. Moldable cork ablation material

    Science.gov (United States)

    1977-01-01

    A successful thermal ablative material was manufactured. Moldable cork sheets were tested for density, tensile strength, tensile elongation, thermal conductivity, compression set, and specific heat. A moldable cork sheet, therefore, was established as a realistic product.

  11. Alternate superior Julia sets

    International Nuclear Information System (INIS)

    Yadav, Anju; Rani, Mamta

    2015-01-01

    Alternate Julia sets have been studied in Picard iterative procedures. The purpose of this paper is to study the quadratic and cubic maps using superior iterates to obtain Julia sets with different alternate structures. Analytically, graphically and computationally it has been shown that alternate superior Julia sets can be connected, disconnected and totally disconnected, and also fattier than the corresponding alternate Julia sets. A few examples have been studied by applying different type of alternate structures

  12. Sets, Planets, and Comets

    Science.gov (United States)

    Baker, Mark; Beltran, Jane; Buell, Jason; Conrey, Brian; Davis, Tom; Donaldson, Brianna; Detorre-Ozeki, Jeanne; Dibble, Leila; Freeman, Tom; Hammie, Robert; Montgomery, Julie; Pickford, Avery; Wong, Justine

    2013-01-01

    Sets in the game "Set" are lines in a certain four-dimensional space. Here we introduce planes into the game, leading to interesting mathematical questions, some of which we solve, and to a wonderful variation on the game "Set," in which every tableau of nine cards must contain at least one configuration for a player to pick up.

  13. Axiomatic set theory

    CERN Document Server

    Suppes, Patrick

    1972-01-01

    This clear and well-developed approach to axiomatic set theory is geared toward upper-level undergraduates and graduate students. It examines the basic paradoxes and history of set theory and advanced topics such as relations and functions, equipollence, finite sets and cardinal numbers, rational and real numbers, and other subjects. 1960 edition.

  14. Paired fuzzy sets

    DEFF Research Database (Denmark)

    Rodríguez, J. Tinguaro; Franco de los Ríos, Camilo; Gómez, Daniel

    2015-01-01

    In this paper we want to stress the relevance of paired fuzzy sets, as already proposed in previous works of the authors, as a family of fuzzy sets that offers a unifying view for different models based upon the opposition of two fuzzy sets, simply allowing the existence of different types...

  15. Analysing deterioration of marble stones exposed to underwater conditions

    Science.gov (United States)

    Cámara, Beatriz; Álvarez de Buergo, Mónica; Bethencourt, Manuel; Freire-Lista, David; Fort, Rafael

    2016-04-01

    The peculiar conditions of the marine environment make the conservation of underwater archaeological sites an extremely complex procedure. This is due to the fact that the prevailing conditions in this environment promote the development of deterioration phenomena in submerged artefacts through the synergistic action of physical, chemical and biological factors. The objective of the present investigation was to determine how petrophysical properties of cultural heritage materials can be affected by being exposed to the specific underwater conditions of the sea bottom, and so, to evaluate how this can affect, in a long term, in their durability and evolution when they part of an archaeological site. For this purpose, two types of marble (the Italian Carrara and the Spanish Macael) were subjected to an experiment consisting of exposing stone materials for one and a half year to underwater conditions. The experimental test was located in an archaeological site in the Bay of Cadiz (southern Spain), Bajo del Chapitel (recognized as Cultural Interest), which includes remains of shipwrecks from different periods. In this site, samples were submerged to 12 m depth and placed in the sea bottom simulating the different positions in which underwater archaeological objects can be found (fully exposed, half buried and covered). Petrophysical characterisation involved determination of the apparent and bulk densities, water saturation (maximum water content a material may contain), open porosity (porosity accessible to water), chromatic parameters and ultrasonic velocity. Before measuring, samples were subjected to mechanical cleaning (in those samples with biological colonization) and to removal of salt deposits. Results showed significant differences in these petrophysical properties after underwater submersion, which were directly related to the type of underwater exposure condition. Comparative analysis of petrophysical properties, like the one conducted in this study

  16. Material Science

    Energy Technology Data Exchange (ETDEWEB)

    Won, Dong Yeon; Kim, Heung

    1987-08-15

    This book introduces material science, which includes key of a high-tech industry, new materials of dream like new metal material and semiconductor, classification of materials, microstructure of materials and characteristic. It mentions magic new materials such as shape memory alloy, fine ceramics, engineering fine ceramics, electronic ceramics, engineering plastic, glass, silicone conductor, optical fiber mixed materials and integrated circuit, challenge for new material and development of new materials.

  17. Material Science

    International Nuclear Information System (INIS)

    Won, Dong Yeon; Kim, Heung

    1987-08-01

    This book introduces material science, which includes key of a high-tech industry, new materials of dream like new metal material and semiconductor, classification of materials, microstructure of materials and characteristic. It mentions magic new materials such as shape memory alloy, fine ceramics, engineering fine ceramics, electronic ceramics, engineering plastic, glass, silicone conductor, optical fiber mixed materials and integrated circuit, challenge for new material and development of new materials.

  18. Materials and material testing

    International Nuclear Information System (INIS)

    Joergens, H.

    1978-01-01

    A review based on 105 literature quotations is given on the latest state of development in the steel sector and in the field of non-ferrous metals and plastics. The works quoted also include, preparation, working, welding including simulation methods, improvement of weldability, material mechanics (explanation of defects mechanisms by means of fracture mechanics), defect causes (corrosion, erosion, hydrogen influence), mechanical-technological and non-destructive material testing. Examples from the field of reactor building are also given within there topics. (IHOE) [de

  19. Composite Material Switches

    Science.gov (United States)

    Javadi, Hamid (Inventor)

    2002-01-01

    A device to protect electronic circuitry from high voltage transients is constructed from a relatively thin piece of conductive composite sandwiched between two conductors so that conduction is through the thickness of the composite piece. The device is based on the discovery that conduction through conductive composite materials in this configuration switches to a high resistance mode when exposed to voltages above a threshold voltage.

  20. Radiation hardening coating material

    International Nuclear Information System (INIS)

    McDonald, W.H.; Prucnal, P.J.; DeMajistre, Robert.

    1977-01-01

    This invention concerns a radiation hardening coating material. First a resin is prepared by reaction of bisphenol diglycidylic ether with acrylic or methacrylic acids. Then the reactive solvent is prepared by reaction of acrylic or methacrylic acids with epichlorhydrine or epibromhydrine. Then a solution consisting of the resin dissolved in the reactive solvent is prepared. A substrate (wood, paper, polyesters, polyamines etc.) is coated with this composition and exposed to ionizing radiations (electron beams) or ultraviolet radiations [fr

  1. Analysis and evaluation of data to accompany the development of geothermal water use power plant, etc. Analysis and evaluation of polymeric materials exposed to geothermal heat at depths; Nessui riyo hatsuden plant nado kaiahtsu ni tomonau data no kaiseki hyoka. Shinbu chinetsuyo kobunshi zairyo no kaiseki hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Kenmochi, K.; Takahashi, J.; Takayanagi, H.; Tsuda, H.; Nagai, H.; Takeuchi, K. [Agency of Industrial Science and Technology, Tokyo (Japan); Nagasawa, C. [Kumamoto Prefectural Industrial Technology Center, Kumamoto (Japan); Hamada, T. [Science University of Tokyo, Tokyo (Japan). Faculty of Industrial Science and Technology

    1998-11-20

    Remaining life assessment technologies for polymeric materials for geothermal power generation and methods for improving their heat resistance are reviewed, and concepts of scale-free technologies for FRP (fiber-reinforced plastic)-sandwiched pipelines for hot water transportation are described. Materials based on PTFE (polytetrafluoroethylene) and NBR (acrylonitrile-butadiene rubber) are chosen for use as DHM (down-hole motor) sealing material and for application to the stator. With PTFE as the matrix, four candidates are prepared, which are additive-free PTFE, and GF/PTFE, GF/CF/PTFE, CF/PTFE, each containing 20w% GF (glass fiber) and/or 20w% CF (carbon fiber). With NBR serving as the matrix, two candidates are prepared, which are NBR-A containing 20w% aramid fiber and NBR-W which is a vulcanized NBR-A. External force, heat, light, and mud are named as the degradation factors, and each factor and some combinations of external force, heat, and light are repeatedly imposed on the materials. During the effort to develop an apparatus for simulating geothermal circumstances in which the factors will affect the materials in complicated ways, a life assessment technique is developed for such polymeric materials. A technology is developed for providing polymeric rubber elastomer with a heat resistant feature. A study is made to replace transportation pipelines for injection wells with FRP sandwiched pipelines. (NEDO)

  2. Social Set Analysis

    DEFF Research Database (Denmark)

    Vatrapu, Ravi; Mukkamala, Raghava Rao; Hussain, Abid

    2016-01-01

    , conceptual and formal models of social data, and an analytical framework for combining big social data sets with organizational and societal data sets. Three empirical studies of big social data are presented to illustrate and demonstrate social set analysis in terms of fuzzy set-theoretical sentiment...... automata and agent-based modeling). However, when it comes to organizational and societal units of analysis, there exists no approach to conceptualize, model, analyze, explain, and predict social media interactions as individuals' associations with ideas, values, identities, and so on. To address...... analysis, crisp set-theoretical interaction analysis, and event-studies-oriented set-theoretical visualizations. Implications for big data analytics, current limitations of the set-theoretical approach, and future directions are outlined....

  3. Specific heat measurement set-up for quench condensed thin superconducting films.

    Science.gov (United States)

    Poran, Shachaf; Molina-Ruiz, Manel; Gérardin, Anne; Frydman, Aviad; Bourgeois, Olivier

    2014-05-01

    We present a set-up designed for the measurement of specific heat of very thin or ultra-thin quench condensed superconducting films. In an ultra-high vacuum chamber, materials of interest can be thermally evaporated directly on a silicon membrane regulated in temperature from 1.4 K to 10 K. On this membrane, a heater and a thermometer are lithographically fabricated, allowing the measurement of heat capacity of the quench condensed layers. This apparatus permits the simultaneous thermal and electrical characterization of successively deposited layers in situ without exposing the deposited materials to room temperature or atmospheric conditions, both being irreversibly harmful to the samples. This system can be used to study specific heat signatures of phase transitions through the superconductor to insulator transition of quench condensed films.

  4. Washout resistance of fast-setting pozzolan cement under various root canal irrigants

    Directory of Open Access Journals (Sweden)

    Ga-Yeon Jang

    2013-11-01

    Full Text Available Objectives Fast-setting pozzolan cement (Endocem, Maruchi was recently developed. The aim of this study was to investigate the effects of various root canal irrigants on the washout of Endocem in comparison to the previously marketed mineral trioxide aggregate (ProRoot; Dentsply in a furcal perforation model. Materials and Methods ProRoot and Endocem were placed into acrylic molds on moist Oasis. Each mold was then immediately exposed to either physiologic saline, 2.5% sodium hypochlorite (NaOCl, or 2% chlorhexidine (CHX under gentle shaking for five minutes. Washout testing was performed by scoring scanning electron microscope (SEM images. Results Endocem exhibited higher washout resistance compared to ProRoot, especially in the NaOCl group. Conclusions These results suggest that Endocem can be considered a useful repair material for furcal perforation, especially in a single-visit scenario.

  5. setsApp for Cytoscape: Set operations for Cytoscape Nodes and Edges [v2; ref status: indexed, http://f1000r.es/5lz

    Directory of Open Access Journals (Sweden)

    John H. Morris

    2015-08-01

    Full Text Available setsApp (http://apps.cytoscape.org/apps/setsapp is a relatively simple Cytoscape 3 app for users to handle groups of nodes and/or edges. It supports several important biological workflows and enables various set operations. setsApp provides basic tools to create sets of nodes or edges, import or export sets, and perform standard set operations (union, difference, intersection on those sets. Automatic set partitioning and layout functions are also provided. The sets functionality is also exposed to users and app developers in the form of a set of commands that can be used for scripting purposes or integrated in other Cytoscape apps.

  6. Development of Si–W transient tolerant plasma facing material

    Energy Technology Data Exchange (ETDEWEB)

    Wong, C.P.C., E-mail: wongc@fusion.gat.com [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States); Chen, B. [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States); Hollmann, E.M.; Rudakov, D.L. [University of California, San Diego, 9500 Gilman Dr., La Jolla, CA 92093-0417 (United States); Wall, D.; Tao, R. [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States); Wright, M. [Ultramet, 12173 Montague Street, Pacoima, CA 91331 (United States)

    2013-07-15

    Solid W is projected as the preferred plasma facing material. Unfortunately, W surfaces could suffer radiation damage under DT operation and will melt under Type-I edge localized modes and disruption events. A possible approach is the use of a low-Z sacrificial material, like Si deposited on the W-surface to withstand a few type-I ELMs and/or disruptions via the vapor shielding effect. Accordingly, sets of Si–W test buttons were fabricated and exposed in the DIII-D lower divertor. We found that when the Si–W buttons were exposed to a few DIII-D vertical displacement event disruptions, tungsten–silicide was formed which melts at 1414 °C. This clearly indicates that the Si–W combination cannot be used as a transient tolerance surface material, since the W surface can be damaged. Even when Si is used as a wall conditioning material the Si–W surface temperature should be operated at much lower than 1400 °C.

  7. Stability of people exposed to water flows

    Directory of Open Access Journals (Sweden)

    E. Martínez-Gomariz

    2016-01-01

    Full Text Available Our cities are formed by several elements which are exposed to floods of a magnitude according to the importance of the rainfall event and the design of the urban drainage system. The most important components in the cities are the pedestrians who develop various activities during rain events. Focusing on pedestrians, the research on their stability when they are exposed to water flows provides the necessary knowledge to understand and manage the associated hazard for them. In this research, several experiments with humans were carried out in order to determine the stability limits to pedestrians crossing through a water flow in a real scale platform. The results obtained and by comparing those with human stability criteria proposed by other authors and guidelines provide a more restrictive criterion.

  8. Children exposed to war/terrorism.

    Science.gov (United States)

    Shaw, Jon A

    2003-12-01

    This paper reviews the prevalence of psychological morbidities in children who have been exposed to war-related traumas or terrorism as well as the diversity of war-related casualties and their associated psychological responses. The psychological responses to war-related stressors are categorized as (1) little or no reaction, (2) acute emotional and behavioral effects, and (3) long-term effects. Specific categories of war-related casualties discussed include refugee status, traumatic bereavement, effects of parental absence, and child soldiers. Psychological responses associated with terrorism and bioterrorism are presented. Lastly, mediators of the psychological response to war-related stressors are discussed, to include exposure effects, gender effects, parental, family and social factors, and child-specific factors. Children exposed to war-related stressors experience a spectrum of psychological morbidities including posttraumatic stress symptomatology, mood disorders, externalizing and disruptive behaviors, and somatic symptoms determined by exposure dose effect. Specific questions for future research are identified.

  9. Virtual endoscopy of the upper urinary tract based on contrast material-enhanced MR urography data sets; Virtuelle Endoskopie des oberen Harntraktes auf der Basis kontrastangehobener MR-Urographie Datensaetze

    Energy Technology Data Exchange (ETDEWEB)

    Nolte-Ernsting, C.C.A.; Krombach, G.; Staatz, G.; Kilbinger, M.; Adam, G.B.; Guenther, R.W. [RWTH Aachen (Germany). Klinik fuer Radiologische Diagnostik

    1999-06-01

    Purpose: To investigate the feasibility of reconstructing a virtual endoscopy from MR imaging data sets of the upper urinary tract. Method: The data obtained from 28 contrast-enhanced MR urographic examinations (5 normal; 23 pathologic) were post-processed to reconstruct a virtual ureterorenoscopy (VURS) using a threshold image segmentation. The visualization of the upper urinary tract was based on the acquisition of T{sub 1}-weighted 3D gradient-echo sequences after intravenous administration of gadolinium-DTPA and a prior injection of low-dose furosemide. Results: The employed MR urography technique created in all 28 cases a complete and strong contrast enhancement of the urinary tract. These 3D sequence data allowed the reconstruction of a VURS, even when the collecting system was not dilated. The best accuracy was provided by the MR urography sequences with the smallest voxel size. Moreover, the data acquisition based on a breath-hold technique has proved superior to that using a respiratory gating. Inside the renal pelvis, all calices could be assessed by turning the virtual endoscope in the appropriate direction. The visualization of the ureteral orifices in the bladder was also possible. All filling defects that were diagnosed by MR urography could be evaluated from the endoluminal view using the VURS. The exact characterization of the lesions based only on the assessment of the surface structure was difficult. Conclusion: A virtual endoscopy of the upper urinary tract can be successfully reconstructed using the data sets of high-resolution 3D MR urography sequences. (orig.) [Deutsch] Ziel: Untersuchungen zur Anwendung der virtuellen Endoskopie auf MR-tomographische Datensaetze des oberen Harntraktes. Methoden: Die Daten von 28 kontrastangehobenen MR-Urographien (5 normal; 23 pathologisch) wurden zur Erstellung einer virtuellen Ureterorenoskopie (VURS) mittels Schwellenwert-Bildsegmentierung nachverarbeitet. Als Grundlage fuer die Darstellung des Harntraktes

  10. Studies on persons exposed to plutonium

    International Nuclear Information System (INIS)

    Voelz, G.L.; Stebbings, J.H.; Hempelmann, L.H.; Haxton, L.K.; York, D.A.

    1978-01-01

    The results of four studies of persons exposed, or potentially exposed, to plutonium are summarized. The studies are: a five-year update on clinical examinations and health experience of 26 Manhattan District workers heavily exposed at Los Alamos in 1944 to 1945; a 30-year mortality follow-up of 224 white male workers with plutonium body burdens of 10 nCi or more; a review of cancer mortality rates between 1950 and 1969 among Los Alamos County, New Mexico, male residents, all of whom have worked in or have lived within a few kilometers of a major plutonium plant and other nuclear facilities; and a review of cancer incidence rates between 1969 and 1974 in male residents of Los Alamos County. No excess of mortality due to any cause was observed in the 224 male subjects with the highest plutonium exposures at Los Alamos. Clinical examinations of the Manhattan District workers, whose average age in 1976 was 56 years, show them to be active persons with diseases that are not unusual for their ages. The two deaths in this group over the past 30 years have not been due to cancer. Mortality and incidence data indicate no excess of lung cancer in Los Alamos County males

  11. Alternative geochemical barrier materials

    International Nuclear Information System (INIS)

    1991-07-01

    Previous investigations of the effects of neutralization and reduction on uranium mill tailings pore fluids by the Technical Support Contractor indicated that arsenic, selenium, and molybdenum continue to remain in solution in all but reducing conditions. These hazardous constituents are present in groundwaters as oxyanions and, therefore, are not expected to be removed by adsorption into clays and most other soil constituents. It was decided to investigate the attenuation capacity of two commonly available crystalline iron oxides, taconite and scoria, and a zeolite, a network aluminosilicate with a cage structure. Columns of the candidate materials were exposed to solutions of individual constituents, including arsenic, molybdenum, selenium, and, uranium, and to the spiked tailings pore fluid from the Bodo Canyon disposal cell near Durango, Colorado. In addition to the single material columns, a homogeneous blend of the three materials and layers of the materials were exposed to spiked tailings pore fluids. The results of these experiments indicate that with the exception of molybdenum, the constituents of concern are attenuated by the taconite; however, they are not sufficiently attenuated to meet the groundwater protection standards applicable to the UMTRA Project. Therefore, the candidate barrier materials did not prove to be useful to the UMTRA Project for the cleanup of groundwaters

  12. Oxidative damage of DNA in subjects occupationally exposed to lead.

    Science.gov (United States)

    Pawlas, Natalia; Olewińska, Elżbieta; Markiewicz-Górka, Iwona; Kozłowska, Agnieszka; Januszewska, Lidia; Lundh, Thomas; Januszewska, Ewa; Pawlas, Krystyna

    2017-09-01

    Exposure to lead (Pb) in environmental and occupational settings continues to be a serious public health problem and may pose an elevated risk of genetic damage. The aim of this study was to assess the level of oxidative stress and DNA damage in subjects occupationally exposed to lead. We studied a population of 78 male workers exposed to lead in a lead and zinc smelter and battery recycling plant and 38 men from a control group. Blood lead levels were detected by graphite furnace atomic absorption spectrophotometry and plasma lead levels by inductively coupled plasma-mass spectrometry. The following assays were performed to assess the DNA damage and oxidative stress: comet assay, determination of 8-hydroxy-2'-deoxyguanosine (8-OHdG), lipid peroxidation and total antioxidant status (TAS). The mean concentration of lead in the blood of the exposed group was 392 ± 103 μg/L and was significantly higher than in the control group (30.3 ± 29.4 μg/L, p lead exposure [lead in blood, lead in plasma, zinc protoporphyrin (ZPP)] and urine concentration of 8-OHdG. The level of oxidative damage of DNA was positively correlated with the level of lipid peroxidation (TBARS) and negatively with total anti-oxidative status (TAS). Our study suggests that occupational exposure causes an increase in oxidative damage to DNA, even in subjects with relatively short length of service (average length of about 10 years). 8-OHdG concentration in the urine proved to be a sensitive and non-invasive marker of lead induced genotoxic damage.

  13. Radiation durability and functional reliability of polymeric materials in space systems

    International Nuclear Information System (INIS)

    Haruvy, Y.

    1990-01-01

    Polymeric materials are preferred for the light-weight construction of space-systems. Materials in space systems are required to fulfill a complete set of specifications, at utmost reliability, throughout the whole period of service in space, while being exposed to the hazardous influence of the space environment. The major threats of the space environment in orbits at the geostationary altitude (GSO) arise from ionizing radiations, the main constituents of which are highly energetic protons (affecting mainly the surface) and fast electrons (which produce the main threat to the electronic components). The maximum dose of ionizing radiation (within the limits of uncertainty of the calculations) at the surface of a material mounted on a space system, namely the ''Skin-Dose'', is ca. 2500 Mrads/yr. Space systems such as telecommunication satellites are planned to serve for prolonged periods of 30 years and longer. The cumulative predicted dose of ionizing-radiation over such periods presents a severe threat of chemical degradation to most of the polymeric construction materials commonly utilized in space systems. The reliability of each of the polymeric materials must be evaluated in detail, considering each of the relevant typical threats, such as ionizing-radiation, UV radiation, meteoroides flux, thermal cycling and ultra-high vacuum. For each of the exposed materials, conservation of the set of functional characteristics such as mechanical integrity, electrical and thermo-optical properties, electrical conductivity, surface charging and outgassing properties, which may cause contamination of neighboring systems, is evaluated. The reliability of functioning of the materials exposed to the space environment can thus be predicted, utilizing data from the literature, experimental results reported from space flights and laboratory simulations, and by chemical similarity of untested polymers to others. (author)

  14. A comparative study of the effect of automobile pollution on pulmonary function tests of exposed cab drivers

    Directory of Open Access Journals (Sweden)

    Amrith Pakkala

    2013-01-01

    Full Text Available Background: Urbanization is associated with an enormous increase in vehicular traffic emitting exhausts and polluting the atmosphere. Emissions from vehicular traffic constitute the most significant source of ultraparticle in an urban environment. Cab drivers who work near areas located in the vicinity of traffic junctions through which maximum number of vehicles passes are more prone to develop health issues pertaining to the respiratory system. The effect of this occupational hazard in this unorganised workforce is not adequately studied. This study is designed to determine the effect of air pollution on the pulmonary system in cab drivers exposed to automobile exhaust. Materials and Methods: This study was conducted by performing pulmonary function tests (PFTs on 20 cab drivers who are exposed to automobile exhaust by virtue of their work venue nearer to traffic junctions and comparing them with 20 age, gender-matched, and anthropometric profile cab drivers who work in a rural setting free from vehicular air pollution. PFT by computerized spirometer measuring forced vital capacity (FVC, forced expiratory volume (FEV 1 , FEV1/FVC, peak expiratory flow rate (PEFR, and forced expiratory flow (FEF 25%-75% were measured. Statistical analysis was done by Student′s t test (two-tailed, independent for intergroup analysis. Results: There was a statistically significant decline in dynamic pulmonary function parameters in the study group when compared. FVC, FEV in first second, PEFR, FEV 1 /FVC, and FEF 25%-75% were all found to be statistically significantly lower in cab drivers as compared to control group (P < 0.001. Conclusion: This study finds a significant decline in various PFT parameters recorded in the study group as compared with the control group. These suggests a tendency for obstructive lung disease among cab drivers exposed to a polluted urban environment.

  15. Rare earth oxyhalogenide base thermoluminescent material

    International Nuclear Information System (INIS)

    Rabatin, J.G.

    1976-01-01

    A process is described that consists to expose a thermoluminescent material to ionizing radiations, the material being a rare earth oxyhalogenide with terbium additions, to heat this material up to the emission of visible radiations and to measure the emitted radiations which are proportional to the ionizing radiation dose [fr

  16. Rotary retort for carbonizing bituminous materials

    Energy Technology Data Exchange (ETDEWEB)

    Meguin, A G; Muller, W

    1920-09-05

    A process of carbonizing bituminous materials, such as coal and oil shale at a low temperature in a rotary retort with simultaneous compressing the material especially of the semicoke formed that is characterized in that the material during the distillation through rapid rotation of the retort is exposed to the action of centrifugal force and thereby it is compressed.

  17. Atomic friction at exposed and buried graphite step edges: Experiments and simulations

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Zhijiang; Martini, Ashlie, E-mail: amartini@ucmerced.edu [School of Engineering, University of California Merced, 5200 N. Lake Road, Merced, California 95343 (United States)

    2015-06-08

    The surfaces of layered materials such as graphite exhibit step edges that affect friction. Step edges can be exposed, where the step occurs at the outmost layer, or buried, where the step is underneath another layer of material. Here, we study friction at exposed and buried step edges on graphite using an atomic force microscope (AFM) and complementary molecular dynamics simulations of the AFM tip apex. Exposed and buried steps exhibit distinct friction behavior, and the friction on either step is affected by the direction of sliding, i.e., moving up or down the step, and the bluntness of the tip. These trends are analyzing in terms of the trajectory of the AFM tip as it moves over the step, which is a convolution of the topography of the surface and the tip shape.

  18. Atomic friction at exposed and buried graphite step edges: Experiments and simulations

    International Nuclear Information System (INIS)

    Ye, Zhijiang; Martini, Ashlie

    2015-01-01

    The surfaces of layered materials such as graphite exhibit step edges that affect friction. Step edges can be exposed, where the step occurs at the outmost layer, or buried, where the step is underneath another layer of material. Here, we study friction at exposed and buried step edges on graphite using an atomic force microscope (AFM) and complementary molecular dynamics simulations of the AFM tip apex. Exposed and buried steps exhibit distinct friction behavior, and the friction on either step is affected by the direction of sliding, i.e., moving up or down the step, and the bluntness of the tip. These trends are analyzing in terms of the trajectory of the AFM tip as it moves over the step, which is a convolution of the topography of the surface and the tip shape

  19. Materials Science

    Science.gov (United States)

    2003-01-01

    The Materials Science Program is structured so that NASA s headquarters is responsible for the program content and selection, through the Enterprise Scientist, and MSFC provides for implementation of ground and flight programs with a Discipline Scientist and Discipline Manager. The Discipline Working Group of eminent scientists from outside of NASA acts in an advisory capacity and writes the Discipline Document from which the NRA content is derived. The program is reviewed approximately every three years by groups such as the Committee on Microgravity Research, the National Materials Advisory Board, and the OBPR Maximization and Prioritization (ReMaP) Task Force. The flight program has had as many as twenty-six principal investigators (PIs) in flight or flight definition stage, with the numbers of PIs in the future dependent on the results of the ReMaP Task Force and internal reviews. Each project has a NASA-appointed Project Scientist, considered a half-time job, who assists the PI in understanding and preparing for internal reviews such as the Science Concept Review and Requirements Definition Review. The Project Scientist also insures that the PI gets the maximum science support from MSFC, represents the PI to the MSFC community, and collaborates with the Project Manager to insure the project is well-supported and remains vital. Currently available flight equipment includes the Materials Science Research Rack (MSRR-1) and Microgravity Science Glovebox. Ground based projects fall into one or more of several categories. Intellectual Underpinning of Flight Program projects include theoretical studies backed by modeling and computer simulations; bring to maturity new research, often by young researchers, and may include preliminary short duration low gravity experiments in the KC-135 aircraft or drop tube; enable characterization of data sets from previous flights; and provide thermophysical property determinations to aid PIs. Radiation Shielding and preliminary In

  20. Optical flow estimation on image sequences with differently exposed frames

    Science.gov (United States)

    Bengtsson, Tomas; McKelvey, Tomas; Lindström, Konstantin

    2015-09-01

    Optical flow (OF) methods are used to estimate dense motion information between consecutive frames in image sequences. In addition to the specific OF estimation method itself, the quality of the input image sequence is of crucial importance to the quality of the resulting flow estimates. For instance, lack of texture in image frames caused by saturation of the camera sensor during exposure can significantly deteriorate the performance. An approach to avoid this negative effect is to use different camera settings when capturing the individual frames. We provide a framework for OF estimation on such sequences that contain differently exposed frames. Information from multiple frames are combined into a total cost functional such that the lack of an active data term for saturated image areas is avoided. Experimental results demonstrate that using alternate camera settings to capture the full dynamic range of an underlying scene can clearly improve the quality of flow estimates. When saturation of image data is significant, the proposed methods show superior performance in terms of lower endpoint errors of the flow vectors compared to a set of baseline methods. Furthermore, we provide some qualitative examples of how and when our method should be used.

  1. Urinary 1-Hydroxypyrene Levels in Workers Exposed to Polycyclic Aromatic Hydrocarbon from Rubber Wood Burning

    Directory of Open Access Journals (Sweden)

    Thitiworn Choosong

    2014-06-01

    Conclusion: The urinary 1-OHP levels of workers exposed to PAHs were high. The accumulation of 1-OHP in the body was not clear although the workers had long working hours with few days off during their working experience. Therefore, a regular day off schedule and rotation shift work during high productive RSS should be set for RSS workers.

  2. Susceptible-infected-recovered and susceptible-exposed-infected models

    International Nuclear Information System (INIS)

    Tome, Tania; De Oliveira, Mario J

    2011-01-01

    Two stochastic epidemic lattice models, the susceptible-infected-recovered and the susceptible-exposed-infected models, are studied on a Cayley tree of coordination number k. The spreading of the disease in the former is found to occur when the infection probability b is larger than b c = k/2(k - 1). In the latter, which is equivalent to a dynamic site percolation model, the spreading occurs when the infection probability p is greater than p c = 1/(k - 1). We set up and solve the time evolution equations for both models and determine the final and time-dependent properties, including the epidemic curve. We show that the two models are closely related by revealing that their relevant properties are exactly mapped into each other when p = b/[k - (k - 1)b]. These include the cluster size distribution and the density of individuals of each type, quantities that have been determined in closed forms.

  3. Environmental stability study of holographic solar spectrum splitting materials

    Science.gov (United States)

    Chrysler, Benjamin D.; Ayala Pelaez, Silvana; Wu, Yuechen; Vorndran, Shelby D.; Kostuk, Raymond K.

    2016-09-01

    In this study the impact of outdoor temperature variations and solar illumination exposure on spectral filter material and holographic optical elements is examined. Although holographic components have been shown to be useful for solar spectrum splitting designs, relatively little quantitative data exist to demonstrate the extent to which these materials can withstand outdoor conditions. As researchers seek to investigate practical spectrum splitting designs, the environmental stability of holographic materials should be considered as an important factor. In the experiment presented, two holographic materials, Covestro Bayfol HX photopolymer and dichromated gelatin, and 3M reflective polymer filter materials are exposed to outdoor conditions for a period of several months. The environmental effect on absorption, spectral and angular bandwidth, peak efficiency, and Bragg matching conditions for the holograms are examined. Spectral bandwidth and transmittance of the 3M reflective filter material are also monitored. Holographic gratings are recorded, measured, and mounted on glass substrates and then sealed with a glass cover plate. The test samples are then mounted on a photovoltaic panel to simulate realistic temperature conditions and placed at an outdoor test facility in Tucson, Arizona. A duplicate set of holograms and 3M filter material is stored as a control group and periodically compared over the test period.

  4. Improvements in or relating to a method of exposing and developing a photographic element

    International Nuclear Information System (INIS)

    Loprest, F.J.

    1981-01-01

    This patent specification claims on behalf of Gaf Corporation, Delaware, U.S.A., a method of exposing and developing a composite photographic reproduction material for use in industrial and medical radiography. The material carries an X-ray-sensitive silver halide emulsion with a considerably reduced amount of silver halide, in combination with a second light sensitive layer containing a light-sensitive composition selected from diazotype compositions which form azo dyes, vesicular compositions and photosensitive polymers. (U.K.)

  5. Haar meager sets revisited

    Czech Academy of Sciences Publication Activity Database

    Doležal, Martin; Rmoutil, M.; Vejnar, B.; Vlasák, V.

    2016-01-01

    Roč. 440, č. 2 (2016), s. 922-939 ISSN 0022-247X Institutional support: RVO:67985840 Keywords : Haar meager set * Haar null set * Polish group Subject RIV: BA - General Mathematics Impact factor: 1.064, year: 2016 http://www.sciencedirect.com/science/article/pii/S0022247X1600305X

  6. Setting goals in psychotherapy

    DEFF Research Database (Denmark)

    Emiliussen, Jakob; Wagoner, Brady

    2013-01-01

    The present study is concerned with the ethical dilemmas of setting goals in therapy. The main questions that it aims to answer are: who is to set the goals for therapy and who is to decide when they have been reached? The study is based on four semi-­‐structured, phenomenological interviews...

  7. Pseudo-set framing.

    Science.gov (United States)

    Barasz, Kate; John, Leslie K; Keenan, Elizabeth A; Norton, Michael I

    2017-10-01

    Pseudo-set framing-arbitrarily grouping items or tasks together as part of an apparent "set"-motivates people to reach perceived completion points. Pseudo-set framing changes gambling choices (Study 1), effort (Studies 2 and 3), giving behavior (Field Data and Study 4), and purchase decisions (Study 5). These effects persist in the absence of any reward, when a cost must be incurred, and after participants are explicitly informed of the arbitrariness of the set. Drawing on Gestalt psychology, we develop a conceptual account that predicts what will-and will not-act as a pseudo-set, and defines the psychological process through which these pseudo-sets affect behavior: over and above typical reference points, pseudo-set framing alters perceptions of (in)completeness, making intermediate progress seem less complete. In turn, these feelings of incompleteness motivate people to persist until the pseudo-set has been fulfilled. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  8. Possibility Fuzzy Soft Set

    Directory of Open Access Journals (Sweden)

    Shawkat Alkhazaleh

    2011-01-01

    Full Text Available We introduce the concept of possibility fuzzy soft set and its operation and study some of its properties. We give applications of this theory in solving a decision-making problem. We also introduce a similarity measure of two possibility fuzzy soft sets and discuss their application in a medical diagnosis problem.

  9. Archaeological predictive model set.

    Science.gov (United States)

    2015-03-01

    This report is the documentation for Task 7 of the Statewide Archaeological Predictive Model Set. The goal of this project is to : develop a set of statewide predictive models to assist the planning of transportation projects. PennDOT is developing t...

  10. Large Data Set Mining

    NARCIS (Netherlands)

    Leemans, I.B.; Broomhall, Susan

    2017-01-01

    Digital emotion research has yet to make history. Until now large data set mining has not been a very active field of research in early modern emotion studies. This is indeed surprising since first, the early modern field has such rich, copyright-free, digitized data sets and second, emotion studies

  11. "Ready, Set, FLOW!"

    Science.gov (United States)

    Stroud, Wesley

    2018-01-01

    All educators want their classrooms to be inviting areas that support investigations. However, a common mistake is to fill learning spaces with items or objects that are set up by the teacher or are simply "for show." This type of setting, although it may create a comfortable space for students, fails to stimulate investigations and…

  12. Analysis of the health of a group exposed to low doses of ionizing radiation

    International Nuclear Information System (INIS)

    Diaz Ledesma, F.; Crespo, H.

    1997-01-01

    In order to evaluate the effects of exposure to low radiation doses, the health status of professional staff exposed to ionizing radiation is investigated. Based on archived material of medical and radiation exposure records taken over a time span of 13 years, a variety of medical parameters are explored. Findings of surveys made are given. (author)

  13. Economic communication model set

    Science.gov (United States)

    Zvereva, Olga M.; Berg, Dmitry B.

    2017-06-01

    This paper details findings from the research work targeted at economic communications investigation with agent-based models usage. The agent-based model set was engineered to simulate economic communications. Money in the form of internal and external currencies was introduced into the models to support exchanges in communications. Every model, being based on the general concept, has its own peculiarities in algorithm and input data set since it was engineered to solve the specific problem. Several and different origin data sets were used in experiments: theoretic sets were estimated on the basis of static Leontief's equilibrium equation and the real set was constructed on the basis of statistical data. While simulation experiments, communication process was observed in dynamics, and system macroparameters were estimated. This research approved that combination of an agent-based and mathematical model can cause a synergetic effect.

  14. Theory of random sets

    CERN Document Server

    Molchanov, Ilya

    2017-01-01

    This monograph, now in a thoroughly revised second edition, offers the latest research on random sets. It has been extended to include substantial developments achieved since 2005, some of them motivated by applications of random sets to econometrics and finance. The present volume builds on the foundations laid by Matheron and others, including the vast advances in stochastic geometry, probability theory, set-valued analysis, and statistical inference. It shows the various interdisciplinary relationships of random set theory within other parts of mathematics, and at the same time fixes terminology and notation that often vary in the literature, establishing it as a natural part of modern probability theory and providing a platform for future development. It is completely self-contained, systematic and exhaustive, with the full proofs that are necessary to gain insight. Aimed at research level, Theory of Random Sets will be an invaluable reference for probabilists; mathematicians working in convex and integ...

  15. Protection of persons occupationally exposed to radiation and of patients

    International Nuclear Information System (INIS)

    Stieve, F.E.

    1976-01-01

    The experiences of the last ten years have shown that the measures of the First Radiation Protection Ordinance generally proved to be sufficient for the protection of the employed or of the patients. They had to be amended in so far as the exposure to radiation for those occupationally exposed can be reduced. This results in changes to the regulations so that certain groups of persons can also be effectively controlled. The recognition that medical supervision for radiation protection reasons is reasonable only if exposure has occurred should be additionally utilized in the regulations if the Euratom standards make this possible. The protection of patients attains some new rules which can be derived from handling and from therapeutical use. In this case too experience resulted in a more reasonable application of ionizing radiation and radioactive materials than was expected when the First Radiation Protection Ordinance was issued. (orig.) [de

  16. Brain magnetic resonance imaging of infants exposed prenatally to buprenorphine

    International Nuclear Information System (INIS)

    Kahila, H.; Kivitie-Kallio, S.; Halmesmaki, E.; Valanne, L.; Autti, T.

    2007-01-01

    Purpose: To evaluate the brains of newborns exposed to buprenorphine prenatally. Material and Methods: Seven neonates followed up antenatally in connection with their mothers' buprenorphine replacement therapy underwent 1.5T magnetic resonance imaging (MRI) of the brain before the age of 2 months. The infants were born to heavy drug abusers. Four mothers were hepatitis C positive, and all were HIV negative. All mothers smoked tobacco and used benzodiazepines. All pregnancies were full term, and no perinatal asphyxia occurred. All but one neonate had abstinence syndrome and needed morphine replacement therapy. Results: Neither structural abnormalities nor abnormalities in signal intensity were recorded. Conclusion: Buprenorphine replacement therapy does not seem to cause any major structural abnormalities of the brain, and it may prevent known hypoxic-ischemic brain changes resulting from uncontrolled drug abuse. Longitudinal studies are needed to assess possible abnormalities in the brain maturation process

  17. Brain magnetic resonance imaging of infants exposed prenatally to buprenorphine

    Energy Technology Data Exchange (ETDEWEB)

    Kahila, H.; Kivitie-Kallio, S.; Halmesmaki, E.; Valanne, L.; Autti, T. [Dept. of Obstetrics and Gynecology, Dept. of Pediatrics, and Helsinki Medical Imaging Center, Helsinki Univ. Central Hospital (Finland)

    2007-02-15

    Purpose: To evaluate the brains of newborns exposed to buprenorphine prenatally. Material and Methods: Seven neonates followed up antenatally in connection with their mothers' buprenorphine replacement therapy underwent 1.5T magnetic resonance imaging (MRI) of the brain before the age of 2 months. The infants were born to heavy drug abusers. Four mothers were hepatitis C positive, and all were HIV negative. All mothers smoked tobacco and used benzodiazepines. All pregnancies were full term, and no perinatal asphyxia occurred. All but one neonate had abstinence syndrome and needed morphine replacement therapy. Results: Neither structural abnormalities nor abnormalities in signal intensity were recorded. Conclusion: Buprenorphine replacement therapy does not seem to cause any major structural abnormalities of the brain, and it may prevent known hypoxic-ischemic brain changes resulting from uncontrolled drug abuse. Longitudinal studies are needed to assess possible abnormalities in the brain maturation process.

  18. setsApp: Set operations for Cytoscape Nodes and Edges [v1; ref status: indexed, http://f1000r.es/3ml

    Directory of Open Access Journals (Sweden)

    John H. Morris

    2014-07-01

    Full Text Available setsApp (http://apps.cytoscape.org/apps/setsapp is a relatively simple Cytoscape 3 app for users to handle groups of nodes and/or edges. It supports several important biological workflows and enables various set operations. setsApp provides basic tools to create sets of nodes or edges, import or export sets, and perform standard set operations (union, difference, intersection on those sets. The sets functionality is also exposed to users and app developers in the form of a set of commands that can be used for scripting purposes or integrated in other Cytoscape apps.

  19. Towards harmonized qualifications for radiation exposed personnel

    International Nuclear Information System (INIS)

    Briso, Hugo A.

    2008-01-01

    The accelerated process of globalization affecting mankind doesn't exclude safety matters. Indeed, some trans national corporations are increasingly offering specialized engineering services such as industrial radiography or well lodging. As well, a growing scientific exchange involves the mobility of nuclear researchers in different areas, for instance radiochemistry, nuclear medicine and radiotherapy. Such a breakdown in the technological frontiers must necessarily be reflected by the regulatory solutions. Particularly, diverse levels of theoretical-practical training for radiation exposed personnel coexist in the Latin-American Region, being an especially sensitive problem for radiation protection matters. The spectrum goes from post-graduate courses required for radiation protection officers in some countries, while in others only basic recommendations are required for the operating personnel. Another scheme consists of medium level course for the operating personnel, while radiation protection officers don't have special requirements. Many educational private institutions teach non standardized courses which only give broad concepts of radiation protection. On the other hand, usually nothing is said about the operational training, or else its certification is entrusted to the employer itself. In some countries multiple Regulatory Authorities apply dissimilar criteria to assess safety matters, including the evaluation of workers applications. The necessary regional integration makes indispensable to establish common standards for granting authorizations. Having similar or homogeneous requirements for the universe of radiation exposed personnel, i.e. source operators, radiation protection officers, qualified experts and technical support people would be easier for the Regulatory Authorities to have common methodologies of evaluation for the applicants. An IAEA supported technical cooperation project related to this paper seeks to establish standardized

  20. Lymphocytic subsets in occupationally exposed persons

    International Nuclear Information System (INIS)

    Tuschl, H.; Kovac, R.; Wottawa, A.

    1989-04-01

    The percentage of CD2, CD4, CD8 and NK cells of peripheral blood was investigated in persons occupationally exposed to very low doses of ionizing radiation. Investigations were carried out by monoclonal antibodies and flow-cytometry. While significant effects of age and smoking habits on the relative number of CD8 cells and CD4/CD8 ratios could be established, no influence of the very low radiation exposure on the profile of lymphocytic cells in blood was found, except a very slight effect on the relative number of total T cells (= CD2 cells). 7tabs., 2figs., 16refs. (Author)

  1. Renographic curve of persons exposed to mercury

    International Nuclear Information System (INIS)

    Kolenic, J.; Jurgova, T.; Zimacek, J.; Petrovicova, J.; Bilicky, J.

    1995-01-01

    In the group of 72 workers which were exposed to fumes of metallic mercury we evaluated possible nephrotoxic effect of Hg 0 . We also used nuclear renography for evaluation of kidney. Nephrotoxic effect of Hg 0 was proved by increased proteinuria and relatively frequent findings of pathological renogram. In the group with pathological renogram, elimination of Hg 0 in urine (1822.8 nmol.dm -3 ) was increased. In the group with normal finding the value was 883.7 nmol.dm -3 . These findings pointed at toxic effect of Hg 0 on kidney and suitability of radionuclide examination for disclosing of subclinical pathological changes. (authors)

  2. Spoiled Onions: Exposing Malicious Tor Exit Relays

    OpenAIRE

    Winter, Philipp; Lindskog, Stefan

    2014-01-01

    Several hundred Tor exit relays together push more than 1 GiB/s of network traffic. However, it is easy for exit relays to snoop and tamper with anonymised network traffic and as all relays are run by independent volunteers, not all of them are innocuous. In this paper, we seek to expose malicious exit relays and document their actions. First, we monitored the Tor network after developing a fast and modular exit relay scanner. We implemented several scanning modules for detecting common attac...

  3. Uniform Protection for Multi-exposed Targets

    DEFF Research Database (Denmark)

    Vigo, Roberto; Nielson, Flemming; Nielson, Hanne Riis

    2014-01-01

    the Quality Calculus that computes the combinations of data required to reach a program point and relates them to a notion of cost. In this way, we can compare the security deployed on different paths that expose the same resource. The analysis is formalised in terms of flow logic, and is implemented......Ensuring that information is protected proportionately to its value is a major challenge in the development of robust distributed systems, where code complexity and technological constraints might allow reaching a key functionality along various paths. We propose a protection analysis over...

  4. Backfilling of trenches exposed to waves

    DEFF Research Database (Denmark)

    Hjelmager Jensen, Jacob; Fredsøe, Jørgen

    1997-01-01

    This paper treats the numerical prediction of initial and long-term morphology of small pipeline trenches. For this purpose a refined flow and sediment transport description is applied such that the entire mathematical problem is formulated and solved on a curvilinear grid using a k - ε turbulence......-closure. The backfilling process of trenches exposed to either waves or a steady current is of importance in relation to the implementation of pipelines in the marine environment. With respect to the sedimentation of trenches, the non-dimensional Trench-Keulegan-Carpenter number, KC = a/L, where a is the excursion length...

  5. Basic set theory

    CERN Document Server

    Levy, Azriel

    2002-01-01

    An advanced-level treatment of the basics of set theory, this text offers students a firm foundation, stopping just short of the areas employing model-theoretic methods. Geared toward upper-level undergraduate and graduate students, it consists of two parts: the first covers pure set theory, including the basic motions, order and well-foundedness, cardinal numbers, the ordinals, and the axiom of choice and some of it consequences; the second deals with applications and advanced topics such as point set topology, real spaces, Boolean algebras, and infinite combinatorics and large cardinals. An

  6. Set theory essentials

    CERN Document Server

    Milewski, Emil G

    2012-01-01

    REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Set Theory includes elementary logic, sets, relations, functions, denumerable and non-denumerable sets, cardinal numbers, Cantor's theorem, axiom of choice, and order relations.

  7. Occupational health care of radiation exposed workers

    International Nuclear Information System (INIS)

    Abdul Rahim Rahman Hamzah

    1995-01-01

    The medical problems encountered by the earlier pioneer workers in radiation at the turn of the century are well known. In the 1928, the ICRP (International Committee for Radiological Protection) was instituted and the ALARA principle of radiation protection was evolved. Occupational health care is about maintaining the health and safety of workers in their workplaces. This involves using medical, nursing and engineering practices to achieve its objectives. In certain occupations, including those where workers are exposed to ionising radiation, some of these principles are enshrined in the legislation and would require statutory compliance. Occupational health care of radiation workers seek to prevent ill health arising from exposure to radiation by consolidating the benefits of exposures control and dosimetry. This is via health surveillance for spillages, contamination and exposures to unsealed sources of radiation. It is unlikely that can plan and hope to cater for a Chernobyl type of disaster. However, for the multitude of workers in industry exposed to radiation, control models are available. These are from the more in industrialize countries with a nuclear based energy industry, and where radioactive gadgetry are used in places ranging from factories and farms to construction sites. These models involve statutory requirements on the standard of work practices, assessment of fitness to work and the monitoring of both the worker and the workplace. A similar framework of activity is present in Malaysia. This will be further enhanced with the development of her general health and safety at work legislation. (author)

  8. Protection of man: the exposed individual

    Energy Technology Data Exchange (ETDEWEB)

    Bohnstedt, A.; Knebel, J.U. [Programme Nuclear Safety Research, Karlsruhe Institute of Technology, Herrmann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Breustedt, B. [Institute for Radiation Research, Karlsruhe Institute of Technology, Herrmann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2010-07-01

    Present methods for quantifying radiation exposure rely on a standardized reference man (75 kg) with defined average anatomical and physiological data. But individual person actually exposed differs from this idealized standard man. Therefore the focus of investigations at the Institute for Radiation Research (Institut fuer Strahlenforschung, ISF) which was founded at Karlsruhe Institute of Technology (Karlsruher Institut fuer Technologie, KIT) in 2009 is based on the vision to place the exposed individual with its anatomical and physiological particularities, under consideration of age, gender, body height, body shape and environment, in the centre of an individual-related quantification of the external and internal radiation exposure. Research work at the ISF is aiming at quantifying radiation exposure by improved determination of doses essentially caused by external radiation fields and the intake of radionuclides into the body. The three main topics of the institute are - external dosimetry (e.g. using a (voxel) model of the hand to simulate skin dose distribution); - internal dosimetry (e.g. body size related efficiency calibration of in-vivo counting equipment); - numerical methods/modeling (e.g. development of a mathematical/voxel-hybrid model of the human body). (authors)

  9. Zirconium ignition in exposed fuel channel

    Energy Technology Data Exchange (ETDEWEB)

    Elias, E., E-mail: merezra@technion.ac.il; Hasan, D.; Nekhamkin, Y.

    2015-05-15

    Highlights: • We demonstrate the idea of runaway zirconium–steam reactions in severe accidents in today's LWRs. • We predict the thermal-hydraulics conditions relevant to cladding oxidation in an exposed fuel channel of a partially uncovered core. • The Semenov theory of metal combustion is extended to define a criterion for runaway oxidation reaction in fuel cladding. - Abstract: A theoretical model based on simultaneous solution of the heat and mass transfer equations is developed for predicting the rate of thermo-chemical reaction between zirconium cladding and a hot steam environment. Ignition conditions relevant to cladding oxidation in an exposed fuel channel of a partially uncovered core are predicted based on the theory of metal combustion. A range of decay power, convective heat transfer coefficients, and initial temperatures leading to uncontrolled runaway cladding oxidation is identified. The model could be readily integrated as part of a fuel channel analysis code for predicting possible outcomes of different accident mitigation procedures in light water nuclear reactors under LOCA conditions.

  10. EXPOSE-E: an ESA astrobiology mission 1.5 years in space.

    Science.gov (United States)

    Rabbow, Elke; Rettberg, Petra; Barczyk, Simon; Bohmeier, Maria; Parpart, André; Panitz, Corinna; Horneck, Gerda; von Heise-Rotenburg, Ralf; Hoppenbrouwers, Tom; Willnecker, Rainer; Baglioni, Pietro; Demets, René; Dettmann, Jan; Reitz, Guenther

    2012-05-01

    The multi-user facility EXPOSE-E was designed by the European Space Agency to enable astrobiology research in space (low-Earth orbit). On 7 February 2008, EXPOSE-E was carried to the International Space Station (ISS) on the European Technology Exposure Facility (EuTEF) platform in the cargo bay of Space Shuttle STS-122 Atlantis. The facility was installed at the starboard cone of the Columbus module by extravehicular activity, where it remained in space for 1.5 years. EXPOSE-E was returned to Earth with STS-128 Discovery on 12 September 2009 for subsequent sample analysis. EXPOSE-E provided accommodation in three exposure trays for a variety of astrobiological test samples that were exposed to selected space conditions: either to space vacuum, solar electromagnetic radiation at >110 nm and cosmic radiation (trays 1 and 3) or to simulated martian surface conditions (tray 2). Data on UV radiation, cosmic radiation, and temperature were measured every 10 s and downlinked by telemetry. A parallel mission ground reference (MGR) experiment was performed on ground with a parallel set of hardware and samples under simulated space conditions. EXPOSE-E performed a successful 1.5-year mission in space.

  11. Lebesgue Sets Immeasurable Existence

    Directory of Open Access Journals (Sweden)

    Diana Marginean Petrovai

    2012-12-01

    Full Text Available It is well known that the notion of measure and integral were released early enough in close connection with practical problems of measuring of geometric figures. Notion of measure was outlined in the early 20th century through H. Lebesgue’s research, founder of the modern theory of measure and integral. It was developed concurrently a technique of integration of functions. Gradually it was formed a specific area todaycalled the measure and integral theory. Essential contributions to building this theory was made by a large number of mathematicians: C. Carathodory, J. Radon, O. Nikodym, S. Bochner, J. Pettis, P. Halmos and many others. In the following we present several abstract sets, classes of sets. There exists the sets which are not Lebesgue measurable and the sets which are Lebesgue measurable but are not Borel measurable. Hence B ⊂ L ⊂ P(X.

  12. Leadership set-up

    DEFF Research Database (Denmark)

    Thude, Bettina Ravnborg; Stenager, Egon; von Plessen, Christian

    2018-01-01

    . Findings: The study found that the leadership set-up did not have any clear influence on interdisciplinary cooperation, as all wards had a high degree of interdisciplinary cooperation independent of which leadership set-up they had. Instead, the authors found a relation between leadership set-up and leader...... could influence legitimacy. Originality/value: The study shows that leadership set-up is not the predominant factor that creates interdisciplinary cooperation; but rather, leader legitimacy also should be considered. Additionally, the study shows that leader legitimacy can be difficult to establish...... and that it cannot be taken for granted. This is something chief executive officers should bear in mind when they plan and implement new leadership structures. Therefore, it would also be useful to look more closely at how to achieve legitimacy in cases where the leader is from a different profession to the staff....

  13. General Paleoclimatology Data Sets

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data of past climate and environment derived from unusual proxy evidence. Parameter keywords describe what was measured in this data set. Additional summary...

  14. HEDIS Limited Data Set

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Healthcare Effectiveness Data and Information Set (HEDIS) is a tool used by more than 90 percent of Americas health plans to measure performance on important...

  15. Optical materials

    International Nuclear Information System (INIS)

    Poker, D.B.; Ortiz, C.

    1989-01-01

    This book reports on: Diamond films, Synthesis of optical materials, Structure related optical properties, Radiation effects in optical materials, Characterization of optical materials, Deposition of optical thin films, and Optical fibers and waveguides

  16. Set theory and physics

    Energy Technology Data Exchange (ETDEWEB)

    Svozil, K. [Univ. of Technology, Vienna (Austria)

    1995-11-01

    Inasmuch as physical theories are formalizable, set theory provides a framework for theoretical physics. Four speculations about the relevance of set theoretical modeling for physics are presented: the role of transcendental set theory (i) in chaos theory, (ii) for paradoxical decompositions of solid three-dimensional objects, (iii) in the theory of effective computability (Church-Turing thesis) related to the possible {open_quotes}solution of supertasks,{close_quotes} and (iv) for weak solutions. Several approaches to set theory and their advantages and disadvantages for physical applications are discussed: Cantorian {open_quotes}naive{close_quotes} (i.e., nonaxiomatic) set theory, contructivism, and operationalism. In the author`s opinion, an attitude, of {open_quotes}suspended attention{close_quotes} (a term borrowed from psychoanalysis) seems most promising for progress. Physical and set theoretical entities must be operationalized wherever possible. At the same time, physicists should be open to {open_quotes}bizarre{close_quotes} or {open_quotes}mindboggling{close_quotes} new formalisms, which need not be operationalizable or testable at the time of their creation, but which may successfully lead to novel fields of phenomenology and technology.

  17. Setting conservation priorities.

    Science.gov (United States)

    Wilson, Kerrie A; Carwardine, Josie; Possingham, Hugh P

    2009-04-01

    A generic framework for setting conservation priorities based on the principles of classic decision theory is provided. This framework encapsulates the key elements of any problem, including the objective, the constraints, and knowledge of the system. Within the context of this framework the broad array of approaches for setting conservation priorities are reviewed. While some approaches prioritize assets or locations for conservation investment, it is concluded here that prioritization is incomplete without consideration of the conservation actions required to conserve the assets at particular locations. The challenges associated with prioritizing investments through time in the face of threats (and also spatially and temporally heterogeneous costs) can be aided by proper problem definition. Using the authors' general framework for setting conservation priorities, multiple criteria can be rationally integrated and where, how, and when to invest conservation resources can be scheduled. Trade-offs are unavoidable in priority setting when there are multiple considerations, and budgets are almost always finite. The authors discuss how trade-offs, risks, uncertainty, feedbacks, and learning can be explicitly evaluated within their generic framework for setting conservation priorities. Finally, they suggest ways that current priority-setting approaches may be improved.

  18. Development & Characterization of Multifunctional Microfluidic Materials

    Science.gov (United States)

    Ucar, Ahmet Burak

    The field of microfluidics has been mostly investigated for miniaturized lab on a chip devices for analytical and clinical applications. However, there is an emerging class of "smart" microfluidic materials, combining microfluidics with soft polymers to yield new functionalities. The best inspiration for such materials found in nature is skin, whose functions are maintained and controlled by a vascular "microfluidic" network. We report here the development and characterization of a few new classes of microfluidic materials. First, we introduced microfluidic materials that can change their stiffness on demand. These materials were based on an engineered microchannel network embedded into a matrix of polydimethylsiloxane (PDMS), whose channels were filled with a liquid photoresist (SU- 8). The elastomer filled with the photoresist was initially soft. The materials were shaped into a desired geometry and then exposed to UV-light. Once photocured, the material preserved the defined shape and it could be bent, twisted or stretched with a very high recoverable strain. As soon as the external force was removed the material returned back to its predefined shape. Thus, the polymerized SU-8 acted as the 'endoskeleton' of the microfluidic network, which drastically increased the composite's elastic and bending moduli. Second, we demonstrated a class of simple and versatile soft microfluidic materials that can be turned optically transparent or colored on demand. These materials were made in the form of flexible sheets containing a microchannel network embedded in PDMS, similar to the photocurable materials. However, this time the channels were filled with a glycerolwater mixture, whose refractive index was matched with that of the PDMS matrix. By pumping such dye solutions into the channel network and consecutively replacing the medium, we showed that we can control the material's color and light transmittance in the visible and near-infrared regions, which can be used for

  19. To be a worker (exposed?) or not to be a worker (exposed?) that is the question

    International Nuclear Information System (INIS)

    Ammerich, M.

    2008-01-01

    The notion of personnel is detailed in this article in order to know exactly what personnel is considered as exposed and what radiation doses are under this term. The regulatory texts are studied in different articles of the French law and show that different kind of exposed personnel are considered. The definitions are varying with the notion of risk, of radiation doses and the work itself. This article asks for a better and more precise definition that will help the actors of radiation protection. (N.C.)

  20. Strategic Materials

    National Research Council Canada - National Science Library

    Buhler, Carl; Burke, Adrian; Davis, Kirk; Gerhard, Michelle; Heil, Valerie; Hulse, Richard; Kwong, Ralph; Mahoney, Michael; Moran, Scott; Peek, Michael

    2006-01-01

    Some materials possess greater value than others. Materials that provide essential support for the nation's economic viability or enable critical military capabilities warrant special attention in security studies...

  1. Brain damage among the prenatally exposed

    International Nuclear Information System (INIS)

    Otake, Masanori; Schull, W.J.; Yoshimaru, Hiroshi.

    1991-01-01

    Significant effects on the developing brain of exposure to ionizing radiation are seen among those individuals exposed in the 8th through the 25th week after fertilization. These effects, particularly in the most sensitive period, 8-15 weeks after fertilization, manifest themselves as an increased frequency of severe mental retardation (SMR), a diminution in IQ score and in school performance, and an increase in the occurrence of seizures. Of 30 SMR cases, 18 (60%) had small heads. About 10% of the individuals with small head sizes observed among the in utero clinical sample were mentally retarded. When all of the cases of mental retardation are included in the analysis, a linear dose-response model fits the data adequately and no evidence of a threshold emerges; however, if the two probable nonradiation-related cases of Down's syndrome are excluded from the 19 SMR cases exposed 8-15 weeks after fertilization, the evidence of a threshold is stronger. The 95% lower bound of the threshold based on the new dosimetry system appears to be in the range of 0.12-0.23 Gy. In the 16-25 week period, the 95% lower bound of the threshold is 0.21 Gy both with and without inclusion of two probable nonradiation-related retarded cases. In a regression analysis of IQ scores and school performance data, a greater linearity is suggested with the new dosimetry (DS86) than with the old (T65DR), but the mean IQ score and the mean school performance of those exposed in utero to doses under 0.10 Gy are similar, and not statistically different from the means in the control group. The risk ratios for unprovoked seizures, following exposure during the 8th through the 15th week after fertilization, are 4.4 (90% confidence interval: 0.5-40.9) after 0.10-0.49 Gy and 24.9 (4.1-191.6) after 0.50 Gy or more when the mentally retarded are included and 4.4 (0.5-40.9) and 14.5 (0.4-199.6), respectively, when they are excluded. (author)

  2. Evaluation of selenium in biological sample of arsenic exposed female skin lesions and skin cancer patients with related to non-exposed skin cancer patients

    Energy Technology Data Exchange (ETDEWEB)

    Kolachi, Nida F.; Kazi, Tasneem G., E-mail: tgkazi@yahoo.com; Wadhwa, Sham K.; Afridi, Hassan I.; Baig, Jameel A.; Khan, Sumaira; Shah, Faheem

    2011-08-01

    The antagonistic effects between selenium (Se) and arsenic (As) suggest that low Se status plays an important role in arsenism development. The objective of present study was to assess Se contents in biological samples of As exposed females have skin lesions and cancer with related to non-exposed skin cancer patients. The biological samples (blood and scalp hair) of As exposed group comprises, female skin cancer (ESC) patients admitted in cancer hospitals have skin lesions (ESL) and exposed referents have not both diseases (ER), belongs to As exposed area of Pakistan. For comparative purposes, age matched female skin cancerous patient (RP) and non-cancerous females (NER) belong to non-exposed areas were also selected. The As and Se in acid digests of biological samples were pre-concentrated by complexing with chelating agent (ammonium pyrrolidinedithiocarbamate), and resulted complexes were extracted into non-ionic extractant (Triton X-114), prior to analysis by electrothermal atomic absorption spectrometry. The enhancement factor of about 25 was obtained by pre-concentrating 10 mL of sample solutions. The accuracy of the optimized procedure was evaluated by using certified reference material (BCR 397) with certified values for Se and As and standard addition method at three concentration levels in real samples. No significant differences was observed (p > 0.05) when comparing the values obtained by the proposed method, added and certified values of both elements. The biological samples of ESC patients had 2-3 folds higher As and lower Se levels as compared to RP (p < 0.001). Understudied exposed referents have high level of As and lower Se contents as compared to referents subjects of non-exposed area (p < 0.01). The higher concentration of As and lower levels of Se in biological samples of cancerous patients are consisted with reported studies. - Research Highlights: {yields} Advance extraction method for the enrichment of arsenic and selenium in biological

  3. Evaluation of selenium in biological sample of arsenic exposed female skin lesions and skin cancer patients with related to non-exposed skin cancer patients

    International Nuclear Information System (INIS)

    Kolachi, Nida F.; Kazi, Tasneem G.; Wadhwa, Sham K.; Afridi, Hassan I.; Baig, Jameel A.; Khan, Sumaira; Shah, Faheem

    2011-01-01

    The antagonistic effects between selenium (Se) and arsenic (As) suggest that low Se status plays an important role in arsenism development. The objective of present study was to assess Se contents in biological samples of As exposed females have skin lesions and cancer with related to non-exposed skin cancer patients. The biological samples (blood and scalp hair) of As exposed group comprises, female skin cancer (ESC) patients admitted in cancer hospitals have skin lesions (ESL) and exposed referents have not both diseases (ER), belongs to As exposed area of Pakistan. For comparative purposes, age matched female skin cancerous patient (RP) and non-cancerous females (NER) belong to non-exposed areas were also selected. The As and Se in acid digests of biological samples were pre-concentrated by complexing with chelating agent (ammonium pyrrolidinedithiocarbamate), and resulted complexes were extracted into non-ionic extractant (Triton X-114), prior to analysis by electrothermal atomic absorption spectrometry. The enhancement factor of about 25 was obtained by pre-concentrating 10 mL of sample solutions. The accuracy of the optimized procedure was evaluated by using certified reference material (BCR 397) with certified values for Se and As and standard addition method at three concentration levels in real samples. No significant differences was observed (p > 0.05) when comparing the values obtained by the proposed method, added and certified values of both elements. The biological samples of ESC patients had 2-3 folds higher As and lower Se levels as compared to RP (p < 0.001). Understudied exposed referents have high level of As and lower Se contents as compared to referents subjects of non-exposed area (p < 0.01). The higher concentration of As and lower levels of Se in biological samples of cancerous patients are consisted with reported studies. - Research Highlights: → Advance extraction method for the enrichment of arsenic and selenium in biological matrices

  4. Immune Response among Patients Exposed to Molds

    Directory of Open Access Journals (Sweden)

    Jordan N. Fink

    2009-12-01

    Full Text Available Macrocyclic trichothecenes, mycotoxins produced by Stachybotrys chartarum, have been implicated in adverse reactions in individuals exposed to mold-contaminated environments. Cellular and humoral immune responses and the presence of trichothecenes were evaluated in patients with mold-related health complaints. Patients underwent history, physical examination, skin prick/puncture tests with mold extracts, immunological evaluations and their sera were analyzed for trichothecenes. T-cell proliferation, macrocyclic trichothecenes, and mold specific IgG and IgA levels were not significantly different than controls; however 70% of the patients had positive skin tests to molds. Thus, IgE mediated or other non-immune mechanisms could be the cause of their symptoms.

  5. Reactivity of lithium exposed graphite surface

    International Nuclear Information System (INIS)

    Harilal, S.S.; Allain, J.P.; Hassanein, A.; Hendricks, M.R.; Nieto-Perez, M.

    2009-01-01

    Lithium as a plasma-facing component has many attractive features in fusion devices. We investigated chemical properties of the lithiated graphite surfaces during deposition using X-ray photoelectron spectroscopy and low-energy ion scattering spectroscopy. In this study we try to address some of the known issues during lithium deposition, viz., the chemical state of lithium on graphite substrate, oxide layer formation mechanisms, Li passivation effects over time, and chemical change during exposure of the sample to ambient air. X-ray photoelectron studies indicate changes in the chemical composition with various thickness of lithium on graphite during deposition. An oxide layer formation is noticed during lithium deposition even though all the experiments were performed in ultrahigh vacuum. The metal oxide is immediately transformed into carbonate when the deposited sample is exposed to air.

  6. Quantum mechanics over sets

    Science.gov (United States)

    Ellerman, David

    2014-03-01

    In models of QM over finite fields (e.g., Schumacher's ``modal quantum theory'' MQT), one finite field stands out, Z2, since Z2 vectors represent sets. QM (finite-dimensional) mathematics can be transported to sets resulting in quantum mechanics over sets or QM/sets. This gives a full probability calculus (unlike MQT with only zero-one modalities) that leads to a fulsome theory of QM/sets including ``logical'' models of the double-slit experiment, Bell's Theorem, QIT, and QC. In QC over Z2 (where gates are non-singular matrices as in MQT), a simple quantum algorithm (one gate plus one function evaluation) solves the Parity SAT problem (finding the parity of the sum of all values of an n-ary Boolean function). Classically, the Parity SAT problem requires 2n function evaluations in contrast to the one function evaluation required in the quantum algorithm. This is quantum speedup but with all the calculations over Z2 just like classical computing. This shows definitively that the source of quantum speedup is not in the greater power of computing over the complex numbers, and confirms the idea that the source is in superposition.

  7. empire as material setting and heuristic grid for new testament

    African Journals Online (AJOL)

    2010-06-17

    Jun 17, 2010 ... constraints inherent in postcolonial biblical studies, as well as to the complexities involved in dealing with ...... cases . . . the indigene's desire for self-determination will have been replaced by a ..... The Oxford handbook of.

  8. Water infiltration into exposed fractured rock surfaces

    International Nuclear Information System (INIS)

    Rasmussen, T.C.; Evans, D.D.

    1993-01-01

    Fractured rock media are present at many existing and potential waste disposal sites, yet characterization data and physical relationships are not well developed for such media. This study focused on water infiltration characteristics of an exposed fractured rock as an approach for defining the upper boundary condition for unsaturated-zone water percolation and contaminant transport modeling. Two adjacent watersheds of 0.24 and 1.73 ha with slopes up to 45% were instrumented for measuring rainfall and runoff. Fracture density was measured from readily observable fracture traces on the surface. Three methods were employed to evaluate the rainfall-runoff relationship. The first method used the annual totals and indicated that only 22.5% of rainfall occurred as runoff for the 1990-1991 water year, which demonstrates a high water intake rate by the exposed fracture system. The second method employed total rainfall and runoff for individual storms in conjunction with the commonly used USDA Soil Conservation Service curve number method developed for wide ranges of soils and vegetation. Curve numbers between 75 and 85 were observed for summer and winter storms with dry antecedent runoff conditions, while values exceeded 90 for wet conditions. The third method used a mass-balance approach for four major storms, which indicated that water intake rates ranged from 2.0 to 7.3 mm h -1 , yielding fracture intake velocities ranging from 122 to 293 m h -1 . The three analyses show the complexity of the infiltration process for fractured rock. However, they contribute to a better understanding of the upper boundary condition for predicting contaminant transport through an unsaturated fractured rock medium. 17 refs., 4 figs., 1 tab

  9. Exposing the Myths, Defining the Future

    International Nuclear Information System (INIS)

    Slavov, S.

    2013-01-01

    With this official statement, the WEC calls for policymakers and industry leaders to ''get real'' as the World Energy Council as a global energy body exposes the myths by informing the energy debate and defines a path to a more sustainable energy future. The World Energy Council urged stakeholders to take urgent and incisive actions, to develop and transform the global energy system. Failure to do so could put aspirations on the triple challenge of WEC Energy Trilemma defined by affordability, accessibility and environmental sustainability at serious risk. Through its multi-year in-depth global studies and issue-mapping the WEC has found that challenges that energy sector is facing today are much more crucial than previously envisaged. The WEC's analysis has exposed a number of myths which influence our understanding of important aspects of the global energy landscape. If not challenged, these misconceptions will lead us down a path of complacency and missed opportunities. Much has, and still is, being done to secure energy future, but the WEC' s studies reveal that current pathways fall short of delivering on global aspirations of energy access, energy security and environmental improvements. If we are to derive the full economic and social benefits from energy resources, then we must take incisive and urgent action to modify our steps to energy solutions. The usual business approaches are not effective, the business as usual is not longer a solution. The focus has moved from large universal solutions to an appreciation of regional and national contexts and sharply differentiated consumer expectations.(author)

  10. Clinical investigation of proximate exposed group, 1

    International Nuclear Information System (INIS)

    Ito, Chikako; Hasegawa, Kazuyo; Kato, Masafumi; Kumasawa, Toshihiko

    1984-01-01

    In order to investigate effects of the A-bombing on prevalence of diabetes mellitus, follow-up studies were made on 5907 A-bomb survivors who received glucose tolerance test (GTT) during 20 years between 1963 and 1983. The A-bomb survivors were divided into the group A (1899 men and 1165 women exposed within 1.9 km from the hypocenter) and the group B (1725 men and 1118 women exposed 3.0 km or farther from it). Among non-obese survivors, 21.9% and 21.8% were being treated for diabetes mellitus or were evaluated as having diabetic type on GTT in the group A and the group B, respectively; while this was seen in 52.1% of obese survivors in the group A and 49.9% in the group B. There was no difference between the groups. In non-obese survivors, the annual development rate from the normal type to the diabetic type was 0.89% in the group A and 0.65% in the group B; the annual development rate from the borderline type to the diabetic type was 5.73% in the group A and 5.49% in the group B, showing no differences between the groups. The annual development rate from the normal or borderline type to the diabetic type was two times or higher in obese survivors than in non-obese survivors irrespective of exposure status. Regarding the number of diabetic survivors who became non-diabetic type in spite of having no treatment, and prevalence of diabetic complications, no difference was seen between the groups. These results suggest that the A-bombing has scarcely influenced the prevalence of diabetes mellitus and clinical course. (Namekawa, K.)

  11. The Model Confidence Set

    DEFF Research Database (Denmark)

    Hansen, Peter Reinhard; Lunde, Asger; Nason, James M.

    The paper introduces the model confidence set (MCS) and applies it to the selection of models. A MCS is a set of models that is constructed such that it will contain the best model with a given level of confidence. The MCS is in this sense analogous to a confidence interval for a parameter. The MCS......, beyond the comparison of models. We apply the MCS procedure to two empirical problems. First, we revisit the inflation forecasting problem posed by Stock and Watson (1999), and compute the MCS for their set of inflation forecasts. Second, we compare a number of Taylor rule regressions and determine...... the MCS of the best in terms of in-sample likelihood criteria....

  12. Revitalizing the setting approach

    DEFF Research Database (Denmark)

    Bloch, Paul; Toft, Ulla; Reinbach, Helene Christine

    2014-01-01

    BackgroundThe concept of health promotion rests on aspirations aiming at enabling people to increase control over and improve their health. Health promotion action is facilitated in settings such as schools, homes and work places. As a contribution to the promotion of healthy lifestyles, we have ...... approach is based on ecological and whole-systems thinking, and stipulates important principles and values of integration, participation, empowerment, context and knowledge-based development....... further developed the setting approach in an effort to harmonise it with contemporary realities (and complexities) of health promotion and public health action. The paper introduces a modified concept, the supersetting approach, which builds on the optimised use of diverse and valuable resources embedded...... in local community settings and on the strengths of social interaction and local ownership as drivers of change processes. Interventions based on a supersetting approach are first and foremost characterised by being integrated, but also participatory, empowering, context-sensitive and knowledge...

  13. Galvanic cells: setting up the Daniell cell.

    OpenAIRE

    Milla González, Miguel

    2008-01-01

    With the reagents (0.05M copper nitrate solution, 0.05M zinc nitrate solution) and material (glassware, potentiometer, electric wire) availabe in the laboratory, the user must set up the Daniell cell. Different configurations can be possible if the half cells are filled with either electrolyte solution. The cell connections to the measuring device can also be changed. In all instances, an explanation of the set up cell is obtained as well as of the measured potential difference.

  14. Set theory and logic

    CERN Document Server

    Stoll, Robert R

    1979-01-01

    Set Theory and Logic is the result of a course of lectures for advanced undergraduates, developed at Oberlin College for the purpose of introducing students to the conceptual foundations of mathematics. Mathematics, specifically the real number system, is approached as a unity whose operations can be logically ordered through axioms. One of the most complex and essential of modern mathematical innovations, the theory of sets (crucial to quantum mechanics and other sciences), is introduced in a most careful concept manner, aiming for the maximum in clarity and stimulation for further study in

  15. Nonmeasurable sets and functions

    CERN Document Server

    Kharazishvili, Alexander

    2004-01-01

    The book is devoted to various constructions of sets which are nonmeasurable with respect to invariant (more generally, quasi-invariant) measures. Our starting point is the classical Vitali theorem stating the existence of subsets of the real line which are not measurable in the Lebesgue sense. This theorem stimulated the development of the following interesting topics in mathematics:1. Paradoxical decompositions of sets in finite-dimensional Euclidean spaces;2. The theory of non-real-valued-measurable cardinals;3. The theory of invariant (quasi-invariant)extensions of invariant (quasi-invaria

  16. Why quasi-sets?

    Directory of Open Access Journals (Sweden)

    Décio Krause

    2002-11-01

    Full Text Available Quasi-set theory was developed to deal with collections of indistinguishable objects. In standard mathematics, there are no such kind of entities, for indistinguishability (agreement with respect to all properties entails numerical identity. The main motivation underlying such a theory is of course quantum physics, for collections of indistinguishable (’identical’ in the physicists’ jargon particles cannot be regarded as ’sets’ of standard set theories, which are collections of distinguishable objects. In this paper, a rationale for the development of such a theory is presented, motivated by Heinz Post’s claim that indistinguishability ofquantum entities should be attributed ’right at the start’.

  17. Combinatorics of finite sets

    CERN Document Server

    Anderson, Ian

    2011-01-01

    Coherent treatment provides comprehensive view of basic methods and results of the combinatorial study of finite set systems. The Clements-Lindstrom extension of the Kruskal-Katona theorem to multisets is explored, as is the Greene-Kleitman result concerning k-saturated chain partitions of general partially ordered sets. Connections with Dilworth's theorem, the marriage problem, and probability are also discussed. Each chapter ends with a helpful series of exercises and outline solutions appear at the end. ""An excellent text for a topics course in discrete mathematics."" - Bulletin of the Ame

  18. 9 CFR 78.8 - Brucellosis exposed cattle.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Brucellosis exposed cattle. 78.8... Restrictions on Interstate Movement of Cattle Because of Brucellosis § 78.8 Brucellosis exposed cattle. Brucellosis exposed cattle may be moved interstate only as follows: (a) Movement to recognized slaughtering...

  19. Building Materials in Arctic Climate

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede

    2005-01-01

    Building in the artic requires special attention on the appropriateness of building materials. The harsh climate makes execution difficult and sets unusual requirements for the pure material properties. In addition, there is a lack of choice of good, natural building materials in the arctic...

  20. Clastogenic factors in the plasma of children exposed at Chernobyl

    International Nuclear Information System (INIS)

    Emerit, I.; Levy, A.; Cernjavski, L.; Alaoui-Youssefi, A.; Pogossian, A.; Quastel, M.; Goldsmith, J.; Merkin, L.; Riklis, E.

    1997-01-01

    Clastogenic factors (CFs), as they were described previously in accidentally or therapeutically irradiated persons, in A-bomb survivors and in liquidators of the Chernobyl nuclear power plant, were also detected in the plasma of Chernobyl-exposed children. A high percentage of plasma ultrafiltrates from 170 children, immigrated to Israel in 1990, exerted clastogenic effects in test cultures set up with blood from healthy donors. The differences were highly significant in comparison to children immigrated from 'clean' cities of the former Soviet Union or children born in Israel. The percentage of CF-positive children and the mean values of the adjusted clastogenic scores (ACS) were higher for those coming from Gomel and Mozyr, which are high exposure sites (IAEA measurements), compared to those coming from Kiev. There was no correlation between residual 137-Caesium body burden and presence of CFs. However, both measurements were not done at the same time (in 1990 and 1992-1994, respectively). Also no relationship could be revealed between enlargement of the thyroid gland and CF-positivity. CFs are not only observed after irradiation, but in a variety of chronic inflammatory diseases with autoimmune reactions. They were also described in the congenital breakage syndromes, which are hereditary diseases with the highest cancer incidence in humans. Whether the clastogenic effects continuously produced by circulating CFs represent a risk factor for malignant late effects deserves further study and follow-up. Since CF formation and CF action are mediated by superoxide radicals, prophylactic treatment with antioxidants may be suggested for Chernobyl-exposed children, whose plasma induces a strongly positive CF-test

  1. Nasal biopsies of children exposed to air pollutants.

    Science.gov (United States)

    Calderón-Garcidueñas, L; Rodriguez-Alcaraz, A; Valencia-Salazar, G; Mora-Tascareño, A; García, R; Osnaya, N; Villarreal-Calderón, A; Devlin, R B; Van Dyke, T

    2001-01-01

    Southwest Metropolitan Mexico City (SWMMC) atmosphere is a complex mixture of air pollutants, including ozone, particulate matter, and aldehydes. Children in SWMMC are exposed chronically and sequentially to numerous toxicants, and they exhibit significant nasal damage. The objective of this study was to assess p53 accumulation by immunohistochemistry in nasal biopsies of SWMMC children. We evaluated 111 biopsies from 107 children (83 exposed SWMMC children and 24 control children residents in a pollutant-compliant Caribbean island). Complete clinical histories and physical examinations, including an ear-nose-throat (ENT) exam were done. There was a significant statistical difference in the upper and lower respiratory symptomatology and ENT findings between control and exposed children (p < 0.001). Control children gave no respiratory symptomatology in the 3 months prior to the study; their biopsies exhibited normal ciliated respiratory epithelium and were p53-negative. SWMMC children complained of epistaxis, nasal obstruction. and crusting. Irregular areas of whitish-gray recessed mucosa over the inferior and middle turbinates were seen in 25% of SWMMC children, and their nasal biopsies displayed basal cell hyperplasia, decreased numbers of ciliated and goblet cells, neutrophilic epithelial infiltrates, squamous metaplasia. and mild dysplasia. Four of 21 SWMMC children with grossly abnormal mucosal changes exhibited strong transmural nuclear p53 staining in their nasal biopsies (p 0.005, odds ratio 26). In the context of lifetime exposures to toxic and potentially carcinogenic air pollutants, p53 nasal induction in children could potentially represent. a) a checkpoint response to toxic exposures, setting up a selective condition for p53 mutation, or b) a p53 mutation has already occurred as a result of such selection. Because the biological significance of p53 nuclear accumulation in the nasal biopsies of these children is not clear at this point, we strongly

  2. Damage assessment in CFRP laminates exposed to impact fatigue loading

    International Nuclear Information System (INIS)

    Tsigkourakos, George; Silberschmidt, Vadim V; Ashcroft, I A

    2011-01-01

    Demand for advanced engineering composites in the aerospace industry is increasing continuously. Lately, carbon fibre reinforced polymers (CFRPs) became one of the most important structural materials in the industry due to a combination of characteristics such as: excellent stiffness, high strength-to-weight ratio, and ease of manufacture according to application. In service, aerospace composite components and structures are exposed to various transient loads, some of which can propagate in them as cyclic impacts. A typical example is an effect of the wind gusts during flight. This type of loading is known as impact fatigue (IF); it is a repetition of low-energy impacts. Such loads can cause various types of damage in composites: fibre breaking, transverse matrix cracking, de-bonding between fibres and matrix and delamination resulting in reduction of residual stiffness and loss of functionality. Furthermore, this damage is often sub-surface, which reinforces the need for more regular inspection. The effects of IF are of major importance due its detrimental effect on the structural integrity of components that can be generated after relatively few impacts at low force levels compared to those in a standard fatigue regime. This study utilises an innovative testing system with the capability of subjecting specimens to a series of repetitive impacts. The primary subject of this paper is to assess the damaging effect of IF on the behaviour of drilled CFRP specimens, exposed to such loading. A detailed damage analysis is implemented utilising an X-ray micro computed tomography system. The main findings suggested that at early stages of life damage is governed by o degree splits along the length of the specimens resulting in a 20% reduction of stiffness. The final failure damage scenario indicated that transverse crasks in the 90 degree plies are the main reason for complete delamination which can be translated to a 50% stiffness reduction.

  3. Prices and Price Setting

    NARCIS (Netherlands)

    R.P. Faber (Riemer)

    2010-01-01

    textabstractThis thesis studies price data and tries to unravel the underlying economic processes of why firms have chosen these prices. It focuses on three aspects of price setting. First, it studies whether the existence of a suggested price has a coordinating effect on the prices of firms.

  4. Cobham recursive set functions

    Czech Academy of Sciences Publication Activity Database

    Beckmann, A.; Buss, S.; Friedman, S.-D.; Müller, M.; Thapen, Neil

    2016-01-01

    Roč. 167, č. 3 (2016), s. 335-369 ISSN 0168-0072 R&D Projects: GA ČR GBP202/12/G061 Institutional support: RVO:67985840 Keywords : set function * polynomial time * Cobham recursion Subject RIV: BA - General Mathematics Impact factor: 0.647, year: 2016 http://www.sciencedirect.com/science/article/pii/S0168007215001293

  5. SET-Routes programme

    CERN Multimedia

    Marietta Schupp, EMBL Photolab

    2008-01-01

    Dr Sabine Hentze, specialist in human genetics, giving an Insight Lecture entitled "Human Genetics – Diagnostics, Indications and Ethical Issues" on 23 September 2008 at EMBL Heidelberg. Activities in a achool in Budapest during a visit of Angela Bekesi, Ambassadors for the SET-Routes programme.

  6. The Crystal Set

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    2014-01-01

    In past issues of this journal, the late H. R. Crane wrote a long series of articles under the running title of "How Things Work." In them, Dick dealt with many questions that physics teachers asked themselves, but did not have the time to answer. This article is my attempt to work through the physics of the crystal set, which I thought…

  7. State-set branching

    DEFF Research Database (Denmark)

    Jensen, Rune Møller; Veloso, Manuela M.; Bryant, Randal E.

    2008-01-01

    In this article, we present a framework called state-set branching that combines symbolic search based on reduced ordered Binary Decision Diagrams (BDDs) with best-first search, such as A* and greedy best-first search. The framework relies on an extension of these algorithms from expanding a sing...

  8. Generalized rough sets

    International Nuclear Information System (INIS)

    Rady, E.A.; Kozae, A.M.; Abd El-Monsef, M.M.E.

    2004-01-01

    The process of analyzing data under uncertainty is a main goal for many real life problems. Statistical analysis for such data is an interested area for research. The aim of this paper is to introduce a new method concerning the generalization and modification of the rough set theory introduced early by Pawlak [Int. J. Comput. Inform. Sci. 11 (1982) 314

  9. Therapists in Oncology Settings

    Science.gov (United States)

    Hendrick, Susan S.

    2013-01-01

    This article describes the author's experiences of working with cancer patients/survivors both individually and in support groups for many years, across several settings. It also documents current best-practice guidelines for the psychosocial treatment of cancer patients/survivors and their families. The author's view of the important qualities…

  10. Probabilistic Open Set Recognition

    Science.gov (United States)

    Jain, Lalit Prithviraj

    Real-world tasks in computer vision, pattern recognition and machine learning often touch upon the open set recognition problem: multi-class recognition with incomplete knowledge of the world and many unknown inputs. An obvious way to approach such problems is to develop a recognition system that thresholds probabilities to reject unknown classes. Traditional rejection techniques are not about the unknown; they are about the uncertain boundary and rejection around that boundary. Thus traditional techniques only represent the "known unknowns". However, a proper open set recognition algorithm is needed to reduce the risk from the "unknown unknowns". This dissertation examines this concept and finds existing probabilistic multi-class recognition approaches are ineffective for true open set recognition. We hypothesize the cause is due to weak adhoc assumptions combined with closed-world assumptions made by existing calibration techniques. Intuitively, if we could accurately model just the positive data for any known class without overfitting, we could reject the large set of unknown classes even under this assumption of incomplete class knowledge. For this, we formulate the problem as one of modeling positive training data by invoking statistical extreme value theory (EVT) near the decision boundary of positive data with respect to negative data. We provide a new algorithm called the PI-SVM for estimating the unnormalized posterior probability of class inclusion. This dissertation also introduces a new open set recognition model called Compact Abating Probability (CAP), where the probability of class membership decreases in value (abates) as points move from known data toward open space. We show that CAP models improve open set recognition for multiple algorithms. Leveraging the CAP formulation, we go on to describe the novel Weibull-calibrated SVM (W-SVM) algorithm, which combines the useful properties of statistical EVT for score calibration with one-class and binary

  11. Distilling carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Griffiths, C A

    1924-04-15

    In apparatus of the kind set forth for distilling solid carbonaceous materials, a rotary retort in the form of a tubular, hollow cylindrical, or other similar hollow body, of small diameter, having a thin wall is provided to which the heat is applied externally, with means operative within it adapted, not only for cleaning the internal wall of the retort but also for distributing the heat throughout the mass of materials under treatment, substantially as described.

  12. Makerspaces in Informal Settings

    Science.gov (United States)

    Brown, Ryan A.; Antink-Meyer, Allison

    2017-01-01

    The maker movement, with its focus on-hands on learning through creating with familiar materials, has seen growth in both formal and informal learning spaces. This article examines three informal learning spaces that have redesigned their space (or a portion of it) to accommodate several tenets of the maker movement and in various ways have become…

  13. Histomorphological patterns in osseous rests exposed at fire; Patrones histomorfologicos en restos oseos expuestos al fuego

    Energy Technology Data Exchange (ETDEWEB)

    Medina, C.; Tiesler, V. [Facultad de Ciencias Antropologicas, UADY, 97000 Merida, Yucatan (Mexico); Oliva, A.I.; Quintana, P. [CINVESTAV, IPN Unidad Merida, Depto. Fisica Aplicada, 97310 Merida (Mexico)

    2005-07-01

    Histomorphology as part of morphological research studies bony structure on the tissue level. Its methods are applied in this investigation to evaluate histomorphological impact patterns in heat-exposed bony material, particularly color changes, fissure patterns, volumetric reduction, and changes in the size of Haversian canals. These variables were evaluated in exposed thin sections of porcine long bones, obtained during two experimental series. The first one was conducted under stable thermal conditions in a furnace by measuring heat impact in stepped time (I to S hours) and temperature intervals (200 to 800 C). During a second experimental phase, bony samples were exposed to direct fire in defined time and heat intervals. The treated specimens were then sectioned and microscopically scrutinized. The results presented here were designed to offer new analytical, measurable standards in the investigation of forms of heat exposition of the human body, applicable in forensics and the study of ancient Maya posthumous body treatments. (Author)

  14. Cytotoxicity of newly developed pozzolan cement and other root-end filling materials on human periodontal ligament cell

    Directory of Open Access Journals (Sweden)

    Minju Song

    2014-02-01

    Full Text Available Objectives The purpose of this study was to evaluate in vitro cytotoxicity of the pozzolan cement and other root-end filling materials using human periodontal ligament cell. Materials and Methods Endocem (Maruchi, white ProRoot MTA (Dentsply, white Angelus MTA (Angelus, and Super EBA (Bosworth Co. were tested after set completely in an incubator at 37℃ for 7 days, Endocem was tested in two ways: 1 immediately after mixing (fresh specimens and 2 after setting completely like other experimental materials. The methods for assessment included light microscopic examination, cell counting and WST-1 assay on human periodontal ligament cell. Results In the results of microscopic examination and cell counting, Super EBA showed significantly lower viable cell than any other groups (p < 0.05. As the results of WST-1 assay, compared with untreated control group, there was no significant cell viability of the Endocem group. However, the fresh mixed Endocem group had significantly less cell viability. The cells exposed to ProRoot MTA and Angelus MTA showed the highest viability, whereas the cells exposed to Super EBA displayed the lowest viability (p < 0.05. Conclusions The cytotoxicity of the pozzolan cement (Endocem was comparable with ProRoot MTA and Angelus MTA. Considering the difficult manipulation and long setting time of ProRoot MTA and Angelus MTA, Endocem can be used as the alternative of retrofilling material.

  15. Set theoretical aspects of real analysis

    CERN Document Server

    Kharazishvili, Alexander B

    2014-01-01

    This book addresses a number of questions in real analysis and classical measure theory that are of a set-theoretic flavor. Accessible to graduate students, the beginning of the book presents introductory topics on real analysis and Lebesque measure theory. These topics highlight the boundary between fundamental concepts of measurability and non-measurability for point sets and functions. The remainder of the book deals with more specialized material on set-theoretical real analysis. Problems are included at the end of each chapter.

  16. Materials Chemistry

    CERN Document Server

    Fahlman, Bradley D

    2011-01-01

    The 2nd edition of Materials Chemistry builds on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field. The 2nd edition continues to offer innovative coverage and practical perspective throughout. After briefly defining materials chemistry and its history, seven chapters discuss solid-state chemistry, metals, semiconducting materials, organic "soft" materials, nanomaterials, and materials characterization. All chapters have been thoroughly updated and expanded with, for example, new sections on ‘soft lithographic’ patterning, ‘click chemistry’ polymerization, nanotoxicity, graphene, as well as many biomaterials applications. The polymer and ‘soft’ materials chapter represents the largest expansion for the 2nd edition. Each ch...

  17. Setting the Record Straight. The Truth About Fad Diets.

    Science.gov (United States)

    Wheat Foods Council, Parker, CO.

    The Setting the Record Straight information packet presents facts to set the record straight about nutrition and debunk fad diets. The kit features materials designed to communicate the importance of balanced eating. Materials include: a time line of fad diets; four reproducible fad diet book review handouts that show the misleading claims rampant…

  18. Free Material Design with Multiple Load Cases

    DEFF Research Database (Denmark)

    Pedersen, Pauli; Pedersen, Niels Leergaard

    2012-01-01

    Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together with a prac......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...... a more physical interpretation of the material constraint....

  19. Overview of the ISS Radiation Environment Observed during the ESA EXPOSE-R2 Mission in 2014-2016

    Science.gov (United States)

    Dachev, T. P.; Bankov, N. G.; Tomov, B. T.; Matviichuk, Yu. N.; Dimitrov, Pl. G.; Häder, D.-P.; Horneck, G.

    2017-11-01

    The radiation risk radiometer-dosimeter (R3D)-R2 solid-state detector performed radiation measurements at the European Space Agency EXPOSE-R2 platform outside of the Russian "Zvezda" module at the International Space Station (ISS) from 24 October 2014 to 11 January 2016. The ISS orbital parameters were average altitude of 415 km and 51.6° inclination. We developed special software and used experimentally obtained formulas to determine the radiation flux-to-dose ratio from the R3DR2 Liulin-type deposited-energy spectrometer. We provide for the first time simultaneous, long-term estimates of radiation dose external to the ISS for four source categories: (i) galactic cosmic ray particles and their secondary products; (ii) protons in the South Atlantic Anomaly region of the inner radiation belt (IRB); (iii) relativistic electrons and/or bremsstrahlung in the outer radiation belt (ORB); and (iv) solar energetic particle (SEP) events. The latter category is new in this study. Additionally, in this study, secondary particles (SP) resulting from energetic particle interaction with the detector and nearby materials are identified. These are observed continuously at high latitudes. The detected SPs are identified using the same sorting requirements as SEP protons. The IRB protons provide the highest consistent hourly dose, while the ORB electrons and SEPs provide the most extreme hourly doses. SEPs were observed 11 times during the study interval. The R3DR2 data support calculation of average equivalent doses. The 30 day and 1 year average equivalent doses are much smaller than the skin and eyes doses recommendations by the National Council on Radiation Protection (Report 132), which provides radiation protection guidance for Low Earth Orbit.

  20. Uranium reference materials

    International Nuclear Information System (INIS)

    Donivan, S.; Chessmore, R.

    1987-07-01

    The Technical Measurements Center has prepared uranium mill tailings reference materials for use by remedial action contractors and cognizant federal and state agencies. Four materials were prepared with varying concentrations of radionuclides, using three tailings materials and a river-bottom soil diluent. All materials were ground, dried, and blended thoroughly to ensure homogeneity. The analyses on which the recommended values for nuclides in the reference materials are based were performed, using independent methods, by the UNC Geotech (UNC) Chemistry Laboratory, Grand Junction, Colorado, and by C.W. Sill (Sill), Idaho National Engineering Laboratory, Idaho Falls, Idaho. Several statistical tests were performed on the analytical data to characterize the reference materials. Results of these tests reveal that the four reference materials are homogeneous and that no large systematic bias exists between the analytical methods used by Sill and those used by TMC. The average values for radionuclides of the two data sets, representing an unbiased estimate, were used as the recommended values for concentrations of nuclides in the reference materials. The recommended concentrations of radionuclides in the four reference materials are provided. Use of these reference materials will aid in providing uniform standardization among measurements made by remedial action contractors. 11 refs., 9 tabs

  1. Biological monitoring results for cadmium exposed workers.

    Science.gov (United States)

    McDiarmid, M A; Freeman, C S; Grossman, E A; Martonik, J

    1996-11-01

    As part of a settlement agreement with the Occupational Safety and Health Administration (OSHA) involving exposure to cadmium (Cd), a battery production facility provided medical surveillance data to OSHA for review. Measurements of cadmium in blood, cadmium in urine, and beta 2-microglobulin in urine were obtained for more than 100 workers over an 18-month period. Some airborne Cd exposure data were also made available. Two subpopulations of this cohort were of primary interest in evaluating compliance with the medical surveillance provisions of the Cadmium Standard. These were a group of 16 workers medically removed from cadmium exposure due to elevations in some biological parameter, and a group of platemakers. Platemaking had presented a particularly high exposure opportunity and had recently undergone engineering interventions to minimize exposure. The effect on three biological monitoring parameters of medical removal protection in the first group and engineering controls in platemakers is reported. Results reveal that both medical removal from cadmium exposures and exposure abatement through the use of engineering and work practice controls generally result in declines in biological monitoring parameters of exposed workers. Implications for the success of interventions are discussed.

  2. Behavioral changes in fish exposed to phytoestrogens

    International Nuclear Information System (INIS)

    Clotfelter, Ethan D.; Rodriguez, Alison C.

    2006-01-01

    We investigated the behavioral effects of exposure to waterborne phytoestrogens in male fighting fish, Betta splendens. Adult fish were exposed to a range of concentrations of genistein, equol, β-sitosterol, and the positive control 17β-estradiol. The following behaviors were measured: spontaneous swimming activity, latency to respond to a perceived intruder (mirror reflection), intensity of aggressive response toward a perceived intruder, probability of constructing a nest in the presence of a female, and the size of the nest constructed. We found few changes in spontaneous swimming activity, the latency to respond to the mirror, and nest size, and modest changes in the probability of constructing a nest. There were significant decreases, however, in the intensity of aggressive behavior toward the mirror following exposure to several concentrations, including environmentally relevant ones, of 17β-estradiol, genistein, and equol. This suggests that phytoestrogen contamination has the potential to significantly affect the behavior of free-living fishes. - Environmentally relevant concentrations of phytoestrogens reduce aggressive behavior in fish

  3. Exposing the “One China” Principle

    Directory of Open Access Journals (Sweden)

    Chien-yuan Tseng

    2016-12-01

    Full Text Available In 1992, when the governments from both sides across the Taiwan Strait began having contacts, both of them, at the People’s Republic of China (PRC’s request, expressed verbally, and in relation to functional issues, that they advocated the “one China” principle, though what “one China” actually meant was open to different interpretations, and the shift that elevated the 1992 “one China” interpretations from the functional level to the political level did not occur until April 2005. Since President Tsai Ing-wen was sworn in and the Democratic Progressive Party (DPP became the ruling party of the Republic of China (ROC on Taiwan in early 2016, the PRC has used Tsai’s rejection of this so-called “1992 consensus” as a pretext to discontinue all intergovernmental communication channels with the ROC on Taiwan, while also cutting down on cross-strait civil exchanges in travel and education. This thinkpiece article aims to scrutinise this “one China” principle, how it has developed over the years, and expose its underlying realities.

  4. Hesitant fuzzy sets theory

    CERN Document Server

    Xu, Zeshui

    2014-01-01

    This book provides the readers with a thorough and systematic introduction to hesitant fuzzy theory. It presents the most recent research results and advanced methods in the field. These includes: hesitant fuzzy aggregation techniques, hesitant fuzzy preference relations, hesitant fuzzy measures, hesitant fuzzy clustering algorithms and hesitant fuzzy multi-attribute decision making methods. Since its introduction by Torra and Narukawa in 2009, hesitant fuzzy sets have become more and more popular and have been used for a wide range of applications, from decision-making problems to cluster analysis, from medical diagnosis to personnel appraisal and information retrieval. This book offers a comprehensive report on the state-of-the-art in hesitant fuzzy sets theory and applications, aiming at becoming a reference guide for both researchers and practitioners in the area of fuzzy mathematics and other applied research fields (e.g. operations research, information science, management science and engineering) chara...

  5. Metabolic signature of sun exposed skin suggests catabolic pathway overweighs anabolic pathway.

    Directory of Open Access Journals (Sweden)

    Manpreet Randhawa

    Full Text Available Skin chronically exposed to sun results in phenotypic changes referred as photoaging. This aspect of aging has been studied extensively through genomic and proteomic tools. Metabolites, the end product are generated as a result of biochemical reactions are often studied as a culmination of complex interplay of gene and protein expression. In this study, we focused exclusively on the metabolome to study effects from sun-exposed and sun-protected skin sites from 25 human subjects. We generated a highly accurate metabolomic signature for the skin that is exposed to sun. Biochemical pathway analysis from this data set showed that sun-exposed skin resides under high oxidative stress and the chains of reactions to produce these metabolites are inclined toward catabolism rather than anabolism. These catabolic activities persuade the skin cells to generate metabolites through the salvage pathway instead of de novo synthesis pathways. Metabolomic profile suggests catabolic pathways and reactive oxygen species operate in a feed forward fashion to alter the biology of sun exposed skin.

  6. Comparing genotoxic signatures in cord blood cells from neonates exposed in utero to zidovudine or tenofovir.

    Science.gov (United States)

    Vivanti, Alexandre; Soheili, Tayebeh S; Cuccuini, Wendy; Luce, Sonia; Mandelbrot, Laurent; Lechenadec, Jerome; Cordier, Anne-Gael; Azria, Elie; Soulier, Jean; Cavazzana, Marina; Blanche, Stéphane; André-Schmutz, Isabelle

    2015-07-17

    Zidovudine and tenofovir are the two main nucleos(t)ide analogs used to prevent mother-to-child transmission of HIV. In vitro, both drugs bind to and integrate into human DNA and inhibit telomerase. The objective of the present study was to assess the genotoxic effects of either zidovudine or tenofovir-based combination therapies on cord blood cells in newborns exposed in utero. We compared the aneuploid rate and the gene expression profiles in cord blood samples from newborns exposed either to zidovudine or tenofovir-based combination therapies during pregnancy and from unexposed controls (n = 8, 9, and 8, respectively). The aneuploidy rate was measured on the cord blood T-cell karyotype. Gene expression profiles of cord blood T cells and hematopoietic stem and progenitor cells were determined with microarrays, analyzed in a gene set enrichment analysis and confirmed by real-time quantitative PCRs. Aneuploidy was more frequent in the zidovudine-exposed group (26.3%) than in the tenofovir-exposed group (14.2%) or in controls (13.3%; P < 0.05 for both). The transcription of genes involved in DNA repair, telomere maintenance, nucleotide metabolism, DNA/RNA synthesis, and the cell cycle was deregulated in samples from both the zidovudine and the tenofovir-exposed groups. Although tenofovir has a lower clastogenic impact than zidovudine, gene expression profiling showed that both drugs alter the transcription of DNA repair and telomere maintenance genes.

  7. Medical handling of accidentally exposed individuals

    International Nuclear Information System (INIS)

    1988-01-01

    In 1978 the International Atomic Energy Agency issued a publication in the IAEA Safety Series entitled Manual on Early Medical Treatment of Possible Radiation Injury (Safety Series No. 47). The contents were directed to first aid and early medical treatment of workers who might be concerned in an accident involving exposure to radiation, whether external or internal. The present manual is the first of a set of three safety series publications dealing with assessment and treatment of overexposures which will constitute an articulated system of documents covering all aspects of diagnosis, prognosis and treatment of overexposures. This document establishes a set of general criteria and recommendations to aid specialists involved in the medical handling of overexposed persons. It deals with the medical management of individual patients or small groups of patients under close medical supervision. 14 refs, 7 figs, 7 tabs

  8. Frame scaling function sets and frame wavelet sets in Rd

    International Nuclear Information System (INIS)

    Liu Zhanwei; Hu Guoen; Wu Guochang

    2009-01-01

    In this paper, we classify frame wavelet sets and frame scaling function sets in higher dimensions. Firstly, we obtain a necessary condition for a set to be the frame wavelet sets. Then, we present a necessary and sufficient condition for a set to be a frame scaling function set. We give a property of frame scaling function sets, too. Some corresponding examples are given to prove our theory in each section.

  9. Insulating materials resistance in intense radiation beams

    International Nuclear Information System (INIS)

    Oproiu, Constantin; Martin, Diana; Scarlat, Florin; Timus, Dan; Brasoveanu, Mirela; Nemtanu, Monica

    2002-01-01

    The paper emphasizes the main changes of the mechanical and electrical properties of some organic insulating materials exposed to accelerated electron beams. These materials are liable to be used in nuclear plants and particle accelerators. The principal mechanical and electrical properties analyzed were: tensile strength, fracture strength, tearing on fracture, dielectric strength, electrical resistivity, dielectric constant and tangent angle of dielectric losses. (authors)

  10. Inventory of MRI applications and workers exposed to MRI-related electromagnetic fields in the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Schaap, Kristel; Christopher-De Vries, Yvette; Slottje, Pauline; Kromhout, Hans, E-mail: h.kromhout@uu.nl

    2013-12-01

    Objective: This study aims to characterise and quantify the population that is occupationally exposed to electromagnetic fields (EMF) from magnetic resonance imaging (MRI) devices and to identify factors that determine the probability and type of exposure. Materials and methods: A questionnaire survey was used to collect information about scanners, procedures, historical developments and employees working with or near MRI scanners in clinical and research MRI departments in the Netherlands. Results: Data were obtained from 145 MRI departments. A rapid increase in the use of MRI and field strength of the scanners was observed and quantified. The strongest magnets were employed by academic hospitals and research departments. Approximately 7000 individuals were reported to be working inside an MRI scanner room and were thus considered to have high probability of occupational exposure to static magnetic fields (SMF). Fifty-four per cent was exposed to SMF at least one day per month. The largest occupationally exposed group were radiographers (n ∼ 1700). Nine per cent of the 7000 involved workers were regularly present inside a scanner room during image acquisition, when exposure to additional types of EMF is considered a possibility. This practice was most prevalent among workers involved in scanning animals. Conclusion: The data illustrate recent trends and historical developments in magnetic resonance imaging and provide an extensive characterisation of the occupationally exposed population. A considerable number of workers are potentially exposed to MRI-related EMF. Type and frequency of potential exposure depend on the job performed, as well as the type of workplace.

  11. Contrast Materials

    Science.gov (United States)

    ... is mixed with water before administration liquid paste tablet When iodine-based and barium-sulfate contrast materials ... for patients with kidney failure or allergies to MRI and/or computed tomography (CT) contrast material. Microbubble ...

  12. Diarrhea Management Training in Early Childhood Settings.

    Science.gov (United States)

    Winnail, Scott D.; Artz, Lynn M.; Geiger, Brian F.; Petri, Cynthia J.; Bailey, Rebecca; Mason, J.W.

    2001-01-01

    Addresses the health of young children and how to safely and effectively care for children with diarrhea in the home and in early child care settings. Discusses specific intervention and program activities, including specially designed materials for mixing homemade oral rehydration usage. (Author/SD)

  13. Dirac materials

    OpenAIRE

    Wehling, T. O.; Black-Schaffer, A. M.; Balatsky, A. V.

    2014-01-01

    A wide range of materials, like d-wave superconductors, graphene, and topological insulators, share a fundamental similarity: their low-energy fermionic excitations behave as massless Dirac particles rather than fermions obeying the usual Schrodinger Hamiltonian. This emergent behavior of Dirac fermions in condensed matter systems defines the unifying framework for a class of materials we call "Dirac materials''. In order to establish this class of materials, we illustrate how Dirac fermions ...

  14. Magnetic Materials

    Science.gov (United States)

    Spaldin, Nicola A.

    2003-04-01

    Magnetic materials are the foundation of multi-billion dollar industries and the focus of intensive research across many disciplines. This book covers the fundamentals, basic theories and applications of magnetism and conventional magnetic materials. Based on a lecture course given by Nicola Spaldin in the Materials Department at University of California, Santa Barbara, the book is ideal for a one- semester course in magnetic materials. It contains numerous homework problems and solutions.

  15. Decision-directed materials-accounting procedures: an overview

    International Nuclear Information System (INIS)

    Shipley, J.P.

    1981-01-01

    With materials balances taken at intervals, methods for treating materials balance data and their use by safeguards decision-making are relatively straightforward. The emphasis on accounting in which balances may be drawn on a daily or weekly basis, raises anew questions in these two areas: (1) what is the most effective means of extracting the maximum amount of information; and (2) how should safeguards decision-makers use the results, and what impact does the decision process have on the analysis techniques. These questions lead to considering combinations of materials balances, which exposes a whole new set of concerns. For example, we must select the most appropriate combinations, which implies some consideration of possible diversion scenarios, such as abrupt or protracted. Control of the overall false-alarm rate is an important requisite of the composite procedure. Significant work has been done on loss estimators, but their role in the materials accounting decision process has only begun to be examined. Current criteria may require periodic statements with respect to materials loss; the analysis procedures must be structured to provide such information. This paper presents an overview of the current technology. Questions still to be answered are pointed out

  16. Advanced insider threat mitigation workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Edmunds, Tom [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2008-11-01

    Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt and protracted theft of nuclear materials. This particular set of materials is a n update of a January 2008 version to add increased emphasis on Material Control and Accounting and its role with respect to protracted insider nuclear material theft scenarios.

  17. Setting Goals for Achievement in Physical Education Settings

    Science.gov (United States)

    Baghurst, Timothy; Tapps, Tyler; Kensinger, Weston

    2015-01-01

    Goal setting has been shown to improve student performance, motivation, and task completion in academic settings. Although goal setting is utilized by many education professionals to help students set realistic and proper goals, physical educators may not be using goal setting effectively. Without incorporating all three types of goals and…

  18. Radiation shielding material

    International Nuclear Information System (INIS)

    Kawakubo, Takamasa; Yamada, Fumiyuki; Nakazato, Kenjiro.

    1976-01-01

    Purpose: To provide a material, which is used for printing a samples name and date on an X-ray photographic film at the same time an X-ray radiography. Constitution: A radiation shielding material of a large mass absorption coefficient such as lead oxide, barium oxide, barium sulfate, etc. is added to a solution of a radiation permeable substance capable of imparting cold plastic fluidity (such as microcrystalline wax, paraffin, low molecular polyethylene, polyvinyl chloride, etc.). The resultant system is agitated and then cooled, and thereafter it is press fitted to or bonded to a base in the form of a film of a predetermined thickness. This radiation shielding layer is scraped off by using a writing tool to enter information to be printed in a photographic film, and then it is laid over the film and exposed to X-radiation to thereby print the information on the film. (Seki, T.)

  19. Characterization of Corrosion on Outdoor-Exposed Aluminum Metal-Matrix Composites as a Function of Reinforcement Specie and Volume Fraction

    National Research Council Canada - National Science Library

    Adler, Ralph P; Snoha, Daniel J; Hawthorn, George; Hihara, Lloyd H

    2008-01-01

    The Hawaii Corrosion Laboratory and the U.S. Army Research Laboratory collaborated to prepare, environmentally expose for up to 2 years, and evaluate multivariant sets of metal matrix composites (MMCs...

  20. Degradation of HEPA filters exposed to DMSO

    International Nuclear Information System (INIS)

    Bergman, W.; Wilson, K.; Larsen, G.; Lopez, R.; LeMay, J.

    1994-01-01

    Dimethyl sulfoxide (DMSO) sprays are being used to remove the high explosive (HE) from nuclear weapons in the process of their dismantlement. A boxed 50 cfm HEPA filter with an integral prefilter was exposed to DMSO vapor and aerosols that were generated by a spray nozzle to simulate conditions expected in the HE dissolution operation. After 198 hours of operation, the pressure drop of the filter had increased from 1.15 inches to 2.85 inches, and the efficiency for 0.3 μm dioctyl sebacate (DOS) aerosols decreased from 99.992% to 98.6%. Most of the DMSO aerosols had collected as a liquid pool inside the boxed HEPA. The liquid was blown out of the filter exit with 100 cfm air flow at the end of the test. Since the filter still met the minimum allowed efficiency of 99.97% after 166 hours of exposure, we recommend replacing the filter every 160 hours of operation or sooner if the pressure drop increases by 50%. Examination of the filter showed that visible cracks appeared at the joints of the wooden frame and a portion of the sealant had pulled away from the frame. Since all of the DMSO will be trapped in the first HEPA filter, the second HEPA filter should not suffer from DMSO degradation. Thus the combined efficiency for the first filter (98.6%) and the second filter (99.97%) is 99.99996% for 0.3μm particles. If the first filter is replaced prior to its degradation, each of the filters will have 99.97% efficiency, and the combined efficiency will be 99.999991%. The collection efficiency for DMSO/HE aerosols will be much higher because the particle size is much greater

  1. Degradation of HEPA filters exposed to DMSO

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W.; Wilson, K.; Larsen, G. [Lawrence Livermore National Laboratory, CA (United States)] [and others

    1995-02-01

    Dimethyl sulfoxide (DMSO) sprays are being used to remove the high explosive (HE) from nuclear weapons in the process of their dismantlement. A boxed 50 cmf HEPA filter with an integral prefilter was exposed to DMSO vapor and aerosols that were generated by a spray nozzle to simulate conditions expected in the HE dissolution operation. After 198 hours of operation, the pressure drop of the filter had increased form 1.15 inches to 2,85 inches, and the efficiency for 0.3 {mu}m dioctyl sebacate (DOS) aerosols decreased form 99.992% to 98.6%. Most of the DMSO aerosols had collected as a liquid pool inside the boxed HEPA. The liquid was blown out of the filter exit with 100 cmf air flow at the end of the test. Since the filter still met the minimum allowed efficiency of 99.97% after 166 hours of exposure, we recommend replacing the filter every 160 hours of operation or sooner if the pressure drop increases by 50%. Examination of the filter showed that visible cracks appeared at the joints of the wooden frame and a portion of the sealant had pulled away from the frame. Since all of the DMSO will be trapped in the first HEPA filter, the second HEPA filter should not suffer from DMSO degradation. Thus the combined efficiency for the first filter (98.6%) and the second filter (99.97%) is 99.99996% for 0.3 {mu}m particles. If the first filter is replaced prior to its degradation, each of the filters will have 99.97% efficiency, and the combined efficiency will be 99.999991%. The collection efficiency for DMSO/HE aerosols will be much higher because the particle size is much greater.

  2. ANALYSIS OF FORMING TREAD WHEEL SETS

    Directory of Open Access Journals (Sweden)

    Igor IVANOV

    2017-09-01

    Full Text Available This paper shows the results of a theoretical study of profile high-speed grinding (PHSG for forming tread wheel sets during repair instead of turning and mold-milling. Significant disadvantages of these methods are low capacity to adapt to the tool and inhomogeneous structure of the wheel material. This leads to understated treatment regimens and difficulties in recovering wheel sets with thermal and mechanical defects. This study carried out modeling and analysis of emerging cutting forces. Proposed algorithms describe the random occurrence of the components of the cutting forces in the restoration profile of wheel sets with an inhomogeneous structure of the material. To identify the statistical features of randomly generated structures fractal dimension and the method of random additions were used. The multifractal spectrum formed is decomposed into monofractals by wavelet transform. The proposed method allows you to create the preconditions for controlling the parameters of the treatment process.

  3. Computational materials design

    International Nuclear Information System (INIS)

    Snyder, R.L.

    1999-01-01

    Full text: Trial and error experimentation is an extremely expensive route to the development of new materials. The coming age of reduced defense funding will dramatically alter the way in which advanced materials have developed. In the absence of large funding we must concentrate on reducing the time and expense that the R and D of a new material consumes. This may be accomplished through the development of computational materials science. Materials are selected today by comparing the technical requirements to the materials databases. When existing materials cannot meet the requirements we explore new systems to develop a new material using experimental databases like the PDF. After proof of concept, the scaling of the new material to manufacture requires evaluating millions of parameter combinations to optimize the performance of the new device. Historically this process takes 10 to 20 years and requires hundreds of millions of dollars. The development of a focused set of computational tools to predict the final properties of new materials will permit the exploration of new materials systems with only a limited amount of materials characterization. However, to bound computational extrapolations, the experimental formulations and characterization will need to be tightly coupled to the computational tasks. The required experimental data must be obtained by dynamic, in-situ, very rapid characterization. Finally, to evaluate the optimization matrix required to manufacture the new material, very rapid in situ analysis techniques will be essential to intelligently monitor and optimize the formation of a desired microstructure. Techniques and examples for the rapid real-time application of XRPD and optical microscopy will be shown. Recent developments in the cross linking of the world's structural and diffraction databases will be presented as the basis for the future Total Pattern Analysis by XRPD. Copyright (1999) Australian X-ray Analytical Association Inc

  4. Radiation surveillance of exposed workers during activities of moving of the earth area of Montecillo

    International Nuclear Information System (INIS)

    Ortiz, M. T.; Alvarez, A.; Garcia, E.; Diaz, P.; Quinones, J.

    2013-01-01

    One of the objectives of this study was to limit the doses received by exposed workers and the public (in this case the workers of the CIEMATs buildings next to the work) by setting the appropriate criteria of optimization and protection.In addition was a theoretical evaluation of the dose inhalation, workers would have received if ALARA study protection measures has not been established. (Author)

  5. Socio-psycho-historical observation on the twin. Sampling methods and case study of the atomic bomb exposed twins

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, S; Satow, Y; Ueoka, Hiroshi; Munaka, M; Kurihara, M [Hiroshima Univ. (Japan). Research Inst. for Nuclear Medicine and Biology

    1980-07-01

    The so-called ''twin control study'', mainly on the monozygotic twins one of which was A-bomb exposed and the other was non-exposed were carried out. Sampling was conducted utilizing the materials as follows: 1) The survey on casualities of A-bomb exposed families in Hiroshima which was undertaken in 1946. 2) The survey of A-bomb survivors in 1965. 3) A-bomb exposed family survey conducted between 1973 to 1975. 4) Investigations of A-bomb victims exposed in the proximal areas from the hypocenter. From the above mentioned materials 470 pairs were selected, of which 220 were exposed. Among them 172 pairs were twins of the same sex. Female and male pair were also employed. In one case they were exposed, while the others were nonexposed. Two pairs were examined under the following methods: 1) Depth interview to ascertain familial casualities with reference to the family life cycle. 2) Socio-historical research. 3) Motoaki's Jinkaku Shindan Kensa (Modified Rorschach test by H. Motoaki), and T.A.T. test. Results obtained were summarized as follows: 1) Both pairs of twins were of similar appearance and personality traits, and had a strong feeling of companionship for each other. 2) In family relationships, the persons studied were very conscious of the role expectations of elder and younger siblings in the twin pairs. 3) Through depth interviews and projective tests, A-bomb exposed pairs still showed deep psychological stresses, resulting from the A-bomb disaster. 4) Both among the exposed twins and within the nonexposed control group twin siblings had a close feeling of companionship for each other. However, nonexposed twins could not understand the psychological experience of twins who had been subjected to the atomic disaster.

  6. Social Set Visualizer

    DEFF Research Database (Denmark)

    Flesch, Benjamin; Hussain, Abid; Vatrapu, Ravi

    2015-01-01

    -edge open source visual analytics libraries from D3.js and creation of new visualizations (ac-tor mobility across time, conversational comets etc). Evaluation of the dashboard consisting of technical testing, usability testing, and domain-specific testing with CSR students and yielded positive results.......This paper presents a state-of-the art visual analytics dash-board, Social Set Visualizer (SoSeVi), of approximately 90 million Facebook actions from 11 different companies that have been mentioned in the traditional media in relation to garment factory accidents in Bangladesh. The enterprise...

  7. Social Set Analysis

    DEFF Research Database (Denmark)

    Vatrapu, Ravi; Hussain, Abid; Buus Lassen, Niels

    2015-01-01

    of Facebook or Twitter data. However, there exist no other holistic computational social science approach beyond the relational sociology and graph theory of SNA. To address this limitation, this paper presents an alternative holistic approach to Big Social Data analytics called Social Set Analysis (SSA......This paper argues that the basic premise of Social Network Analysis (SNA) -- namely that social reality is constituted by dyadic relations and that social interactions are determined by structural properties of networks-- is neither necessary nor sufficient, for Big Social Data analytics...

  8. Markov set-chains

    CERN Document Server

    Hartfiel, Darald J

    1998-01-01

    In this study extending classical Markov chain theory to handle fluctuating transition matrices, the author develops a theory of Markov set-chains and provides numerous examples showing how that theory can be applied. Chapters are concluded with a discussion of related research. Readers who can benefit from this monograph are those interested in, or involved with, systems whose data is imprecise or that fluctuate with time. A background equivalent to a course in linear algebra and one in probability theory should be sufficient.

  9. Composite materials

    International Nuclear Information System (INIS)

    Sambrook, D.J.

    1976-01-01

    A superconductor composite is described comprising at least one longitudinally extending superconductor filament or bundle of sub-filaments, each filament or bundle of sub-filaments being surrounded by and in good electrical contact with a matrix material, the matrix material comprising a plurality of longitudinally extending cells of a metal of high electrical conductivity surrounded by a material of lower electrical conductivity. The high electrical conductivity material surrounding the superconducting filament or bundle of sub-filaments is interrupted by a radially extending wall of the material of the lower electrical conductivity, the arrangement being such that at least two superconductor filaments or sub-filaments are circumferentially circumscribed by a single annulus of the material of high electrical conductivity. The annulus is electrically interrupted by a radially extending wall of the material of low electrical conductivity

  10. Aerospace materials and material technologies

    CERN Document Server

    Wanhill, R

    2017-01-01

    This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. A considerable amount of materials data is compiled and presented in appendices at the end of the book. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

  11. Novel gene sets improve set-level classification of prokaryotic gene expression data.

    Science.gov (United States)

    Holec, Matěj; Kuželka, Ondřej; Železný, Filip

    2015-10-28

    Set-level classification of gene expression data has received significant attention recently. In this setting, high-dimensional vectors of features corresponding to genes are converted into lower-dimensional vectors of features corresponding to biologically interpretable gene sets. The dimensionality reduction brings the promise of a decreased risk of overfitting, potentially resulting in improved accuracy of the learned classifiers. However, recent empirical research has not confirmed this expectation. Here we hypothesize that the reported unfavorable classification results in the set-level framework were due to the adoption of unsuitable gene sets defined typically on the basis of the Gene ontology and the KEGG database of metabolic networks. We explore an alternative approach to defining gene sets, based on regulatory interactions, which we expect to collect genes with more correlated expression. We hypothesize that such more correlated gene sets will enable to learn more accurate classifiers. We define two families of gene sets using information on regulatory interactions, and evaluate them on phenotype-classification tasks using public prokaryotic gene expression data sets. From each of the two gene-set families, we first select the best-performing subtype. The two selected subtypes are then evaluated on independent (testing) data sets against state-of-the-art gene sets and against the conventional gene-level approach. The novel gene sets are indeed more correlated than the conventional ones, and lead to significantly more accurate classifiers. The novel gene sets are indeed more correlated than the conventional ones, and lead to significantly more accurate classifiers. Novel gene sets defined on the basis of regulatory interactions improve set-level classification of gene expression data. The experimental scripts and other material needed to reproduce the experiments are available at http://ida.felk.cvut.cz/novelgenesets.tar.gz.

  12. Cyclooxygenase-2-dependent bronchoconstriction in perfused rat lungs exposed to endotoxin.

    OpenAIRE

    Uhlig, S.; Nüsing, R.; von Bethmann, A.; Featherstone, R. L.; Klein, T.; Brasch, F.; Müller, K. M.; Ullrich, V.; Wendel, A.

    1996-01-01

    BACKGROUND: Lipopolysaccharides (LPS), widely used to study the mechanisms of gram-negative sepsis, increase airway resistance by constriction of terminal bronchioles. The role of the cyclooxygenase (COX) isoenzymes and their prostanoid metabolites in this process was studied. MATERIALS AND METHODS: Pulmonary resistance, the release of thromboxane (TX) and the expression of COX-2 mRNA were measured in isolated blood-free perfused rat lungs exposed to LPS. RESULTS: LPS induced the release of T...

  13. Determination of the displacement cross-section in C-60 fullerene exposed to the gamma rays

    International Nuclear Information System (INIS)

    Leyva, A.; Pinnera, I.; Leyva, D.; Cruz, C.; Abreu, Y.

    2011-01-01

    Using the threshold energy values reported in literature for spherical fullerene C-60 molecules and taking into account the McKinley-Feshbach approach, the effective atomic displacement cross-section in C-60 nanostructures exposed to the gamma rays was estimated. The Kinchin-Pease approximation for the damage function was also considered. These calculations were performed using MCCM code system developed by the authors for the study of gamma radiation damage in solid materials. (Author)

  14. The management of workers occupationally exposed to ionizing radiation

    International Nuclear Information System (INIS)

    1993-10-01

    In Canada, the regulation of radiation protection is a shared responsibility between the federal body (the Atomic Energy Control Board) and the appropriate provincial body (usually the Department of Health, or Department of Labour). The AECB is responsible, for example, for regulating the development, application and use of nuclear energy and radioisotopes, and the provinces are responsible for the regulation of all other forms of ionizing and non-ionizing radiations and for naturally-occurring radioactive material (NORM). Although there is consultation between the federal and provincial regulatory agencies, the division of jurisdictional authority has resulted in considerable differences in the approach towards implementation radiation protection programs in Canada. This is especially true in the management of workers occupationally exposed to ionizing radiation. These differences have produced unwarranted discrepancies in operating procedures and practices in the allocation of resources and manpower, and in the requirements governing radiological training, personnel monitoring and medical surveillance. In light of the General Amendments to the AEC Regulations, the 1990 Recommendations of the ICRP, and the IAEA recommendations on safety culture, the ACRP has considered it timely to undertake a study to examine the feasibility of establishing a more coherent approach to harmonize radiation protection practices within Canada. This study comprised an examination of the regulatory approach used in several countries: a review of the nature of radiation safety programs in various types of licensed institutions and facilities in Canada; and a review of recommendations of internationally-recognized authorities in radiation protection

  15. Lung scintigraphy evaluation in workers exposed to abrasive dusts

    International Nuclear Information System (INIS)

    Terra Filho, Mario

    1995-01-01

    The production process of abrasives use aluminium, or silicon carbide a synthetic material with a hardness only slightly less than that of a diamond. It is popularly known as carborundum since it was first manufactured as an abrasive in 1891, produced by the fusion of high grade silica and petroleum coke with sawdust. For many years silicon carbide was thought not to give rise to pulmonary lesions. Recently several researchers suggested the existence of a carborundum pneumoconiosis. The aim of this study was to evaluate the role of the pulmonary clearance of 99m Technetium chelated to diethylene-triamine penta-acetate ( 99m Tc DTPA), and 67 Gallium lung scanning in workers exposed to abrasive dusts. Thirty seven subjects, 13 smokers and 24 nonsmokers and ex smokers were studied. In 32 (86,48%) 67 Gallium lung scanning was positive including 13 (40,62%) retired workers. We conclude that non smoking workers of abrasives plants have a pulmonary alveolar epithelial permeability disturbance similar as observed in smoking workers and smoking controls. Most workers, ex-workers of these industries and in patients with carborundum pneumoconiosis there is an evidence of pulmonary inflammation measured with abnormal 67 Gallium lung scan. (author)

  16. Long-term study on workers occupationally exposed to ethylbenzene.

    Science.gov (United States)

    Bardodĕj, Z; Círek, A

    1988-01-01

    Ethylbenzene is synthesized from benzene; subject to catalytic dehydrogenation it yields styrene, a raw material for the production of synthetic rubber and plastics. Long-term biomonitoring of occupational ethylbenzene exposures, carried out in the past 20 years in some 200 ethylbenzene-production workers, revealed this substance to pose little hazard to human health. As it turned out, mandelic acid concentrations in these workers' urine never exceeded 3.25 mmol.l-1 and none of the exposed showed damage to hematopoiesis and/or liver tissue. Over the last 10 years no case of malignancy has been recorded in this industrial facility belonging to a larger chemical complex where the overall incidence of cancer is about 3 times the national average. Today's low-level ethylbenzene exposures would make it fully justifiable if the present-day MAC limits, both whole-shift (200 mg.m-3) and peak (1,000 mg.m-3), were to be halved, i.e. to be lowered to 100 mg.m3 and 500 mg.m3 respectively. These newly recommended limit values are no more exceeded nowadays.

  17. Materials Discovery | Materials Science | NREL

    Science.gov (United States)

    Discovery Materials Discovery Images of red and yellow particles NREL's research in materials characterization of sample by incoming beam and measuring outgoing particles, with data being stored and analyzed Staff Scientist Dr. Zakutayev specializes in design of novel semiconductor materials for energy

  18. Dose-response study in F344 rats exposed to (U,Pu)O2 or PuO2

    International Nuclear Information System (INIS)

    Mewhinney, J.A.; Eidson, A.F.; Hahn, F.F.; Scott, B.R.; Seiler, F.A.; Boecker, B.B.

    1987-01-01

    The relationship of radiation dose to lung and the biological effect observed was investigated following inhalation of two types of plutonium-containing particulate materials in rats. Bulk powder samples of the two materials were obtained from within gloveboxes used in the routine manufacture of mixed plutonium and uranium oxide nuclear fuel. The materials were a solid solution of uranium and plutonium treated at 1750 0 C and a PuO 2 feedstock. Groups of rats received a single inhalation exposure to a material to achieve one of three levels of initial pulmonary burden. Rats were maintained for their lifespan to observe the biological effects produced. These effects were observed in the lungs of rats exposed to either type of particle. The same types of lung cancer were produced by both particulate materials. The incidences of cancers were also similar at comparable levels of initial pulmonary burden for the two materials. The crude incidence of lung cancers for rats exposed to these materials was not different than those reported for similar studies that used laboratory-produced aerosols of PuO 2 . Using a linear dose-effect model, the relative risk of lung cancer for rats exposed to these industrial materials was 2.3 +- 1.0 (SE) at a lung dose of 100 rad. The doubling dose for lung cancers was 78 +- 63 rad to lung to median life span. 21 refs., 9 figs., 10 tabs

  19. Analysis of successive data sets

    NARCIS (Netherlands)

    Spreeuwers, Lieuwe Jan; Breeuwer, Marcel; Haselhoff, Eltjo Hans

    2008-01-01

    The invention relates to the analysis of successive data sets. A local intensity variation is formed from such successive data sets, that is, from data values in successive data sets at corresponding positions in each of the data sets. A region of interest is localized in the individual data sets on

  20. Analysis of successive data sets

    NARCIS (Netherlands)

    Spreeuwers, Lieuwe Jan; Breeuwer, Marcel; Haselhoff, Eltjo Hans

    2002-01-01

    The invention relates to the analysis of successive data sets. A local intensity variation is formed from such successive data sets, that is, from data values in successive data sets at corresponding positions in each of the data sets. A region of interest is localized in the individual data sets on

  1. [A survey of occupational health among polyether-exposed workers].

    Science.gov (United States)

    Fu, Xu-ying; Yu, Bin; Zhang, Chun-ping; Zheng, Guan-hua; Bai, Lan; Zhang, Pan-pan

    2013-06-01

    To investigate the occupational health of the workers simultaneously exposed to acrylonitrile, epoxyethane, epoxypropane, and styrene. A questionnaire survey was conducted in 70 front-line workers simultaneously exposed to acrylonitrile, epoxyethane, epoxypropane, and styrene (exposure group) and 50 managers (control group) in a polyether manufacturer; in addition, air monitoring at workplace and occupational health examination were also performed. The obtained data were analyzed. The female workers in exposure group and the spouses of male workers in exposure group had significantly higher spontaneous abortion rates than their counterparts in control group (P polyether-exposed working years had significantly higher mean levels of DNA damage than the control group (P polyether-exposed working years and those with not less than 20 polyether-exposed working years had significantly higher mean micronucleus rates than the control group (P polyether-exposed working years (P > 0.05); the workers with not less than 5 and less than 20 polyether-exposed working years and workers with not less than 20 polyether-exposed working years had significantly higher mean micronucleus rates than those with less than 5 polyether-exposed working years (P polyether manufacturer.

  2. Dynamical basis set

    International Nuclear Information System (INIS)

    Blanco, M.; Heller, E.J.

    1985-01-01

    A new Cartesian basis set is defined that is suitable for the representation of molecular vibration-rotation bound states. The Cartesian basis functions are superpositions of semiclassical states generated through the use of classical trajectories that conform to the intrinsic dynamics of the molecule. Although semiclassical input is employed, the method becomes ab initio through the standard matrix diagonalization variational method. Special attention is given to classical-quantum correspondences for angular momentum. In particular, it is shown that the use of semiclassical information preferentially leads to angular momentum eigenstates with magnetic quantum number Vertical BarMVertical Bar equal to the total angular momentum J. The present method offers a reliable technique for representing highly excited vibrational-rotational states where perturbation techniques are no longer applicable

  3. Estimation of internal exposure for exposed personnel from a CANDU nuclear fuel factory

    International Nuclear Information System (INIS)

    Horhoianu, Valeria; Valeca Monica; Hirica, Ovidiu; Todoran, Anca

    2004-01-01

    The knowledge of the radioactive material behaviour inside the human body is an essential issue for interpretation of the radioactivity measurements in human body or excretions in terms of internal contamination or committed equivalent dose. The paper presents evaluation of internal contamination of professionally exposed workers from a CANDU nuclear fuel factory with the ACRO computer code which estimates burden and tissue or organ dose resulting from inhalation or ingestion of radioactive materials. The workplaces where continuous aerosol sampling are carried out have been taken into account for the analysis. For potentially inhaled activity assessment, the average aerosol concentrations were estimated. The dose equivalent and collective dose equivalent are also estimated. (authors)

  4. Estimation of internal exposure for exposed personnel from a Candu nuclear fuel factory

    International Nuclear Information System (INIS)

    Horhoianu, V.; Hirica, O.; Valeca, M.; Todoran, A.

    2003-01-01

    The knowledge of the radioactive material behavior inside the human body is an essential issue for interpretation of the radioactivity measurements in human body or excretions in terms of internal contamination or committed equivalent dose. The paper present evaluation of internal contamination of professionally exposed workers from a Candu nuclear fuel factory with the ACRO computer code which estimate burden and tissue or organ dose resulting from inhalation or ingestion of radioactive materials. The workplaces where continuos aerosols sampling are carried out, has been taken into account for the analysis. For potentially inhaled activity assessment, the average aerosol concentrations were estimated. The dose equivalent and collective dose equivalent are also estimated. (authors)

  5. Potential for efficient frequency conversion at high average power using solid state nonlinear optical materials

    International Nuclear Information System (INIS)

    Eimerl, D.

    1985-01-01

    High-average-power frequency conversion using solid state nonlinear materials is discussed. Recent laboratory experience and new developments in design concepts show that current technology, a few tens of watts, may be extended by several orders of magnitude. For example, using KD*P, efficient doubling (>70%) of Nd:YAG at average powers approaching 100 KW is possible; and for doubling to the blue or ultraviolet regions, the average power may approach 1 MW. Configurations using segmented apertures permit essentially unlimited scaling of average power. High average power is achieved by configuring the nonlinear material as a set of thin plates with a large ratio of surface area to volume and by cooling the exposed surfaces with a flowing gas. The design and material fabrication of such a harmonic generator are well within current technology

  6. Conceptual framework and technical basis for clearance of materials with residual radioactivity

    International Nuclear Information System (INIS)

    Chen, S.Y.

    1997-01-01

    The primary impediment to the release of materials containing residual radioactivity from a controlled environment is the lack of a suitable framework within which release standards can be developed. Recently, the 'risk-based' approach has been proposed as an appropriate means of setting standards. The term 'clearance' has been introduced by the International Atomic Energy Commission as a regulatory process for releasing radioactive materials posing trivial risks. A 'trivial' risk level has been determined to be on the order of 10[sup -6] to 10[sup -7] annual risk to an exposed individual, and a population risk of no more than 0.1 annually. Under these strict constraints, exposure scenarios may account for processing, disposal, and product end-use of materials. This paper discusses these scenarios and also describes the technical basis for deriving release levels under the suggested risk (or dose) constraints

  7. Nano Materials

    International Nuclear Information System (INIS)

    Jin, In Ju; Lee, Ik Mo; Kwon, Yeung Gu

    2006-02-01

    This book introduces background of nano science such as summary, plenty room at the bottom, access way to nano technique, nanoparticles using bottom-up method which are a marvel of nature, and modern alchemy : chemical synthesis of artificial nano structure, understanding of quantum mechanics, STM/AFM, nano metal powder, ceramic nanoparticles, nano structure film, manufacture of nanoparticles using reverse micelle method, carbon nano tube, sol-gel material, nano energy material, nano catalyst nano bio material technology and spintronics.

  8. Material focus

    DEFF Research Database (Denmark)

    Sokoler, Tomas; Vallgårda, Anna K. A.

    2009-01-01

    In this paper we build on the notion of computational composites, which hold a material perspective on computational technology. We argue that a focus on the material aspects of the technology could be a fruitful approach to achieve new expressions and to gain a new view on the technology's role...... in design. We study two of the computer's material properties: computed causality and connectability and through developing two computational composites that utilize these properties we begin to explore their potential expressions....

  9. Materializing Ethnography

    OpenAIRE

    Geismar, H.; Horst, H. A.

    2004-01-01

    The articles in this volume were originally presented in a panel entitled ‘Material Methodologies’ at the American Anthropological Association meeting in New Orleans (November 2002). The panel was devised to tie together theoretical advances in the study of the material with the creative possibilities of fieldwork practices. Through detailed ethnographic discussion, we highlighted the ways in which a focus on a specifically material world enabled us to discover new perspecti...

  10. Moessbauer Spectroscopy in Materials Science

    International Nuclear Information System (INIS)

    2006-01-01

    The publication in electronic form has been set up as proceedings of the conference dealing with applications of the Moessbauer spectroscopy in material science. Twenty-three abstracts and twenty-two presentations are included.

  11. Materials characterisation

    International Nuclear Information System (INIS)

    Azali Muhammad

    2005-01-01

    Various nuclear techniques have been developed and employed by technologies and scientists worldwide to physically and chemically characterise the material particularly those that have applications in industry. These include small angle neutron scattering (SANS), x-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) for the internal structural study of material, whereas, the x-ray fluorescence (XRF) for the chemical analysis, while the Moessbauer spectroscopy for the study on the magnetic properties and structural identity of material. Basic principle and instrumentations of the techniques are discussed in this chapter. Example of their applications in various disciplines particularly in characterisation of industrial materials also described

  12. Clinical course of brain stroke in the persons exposed to ionizing radiation under the production conditions

    International Nuclear Information System (INIS)

    Bouchmanov, A.

    2000-01-01

    The purpose was to study the risk factors and clinical course of brain strokes in professionally exposed workers being employed in plutonium production in comparison with a control group. The method and materials of study -clinical supervision and clinical database creation on 162 cases of brain stroke (128 males and 34 females) developed among professionally exposed workers. Age of patient varied from 21 to 68 years (in average -51.6 y.). The control group consisted of patients with the same diagnosis, worked on the same enterprise, but non-exposed to radiation. Data on the totally accumulated dose of external gamma radiation were received on the base of the individual dosimeters (from 0.1 cSv to 52 cSv, in average about 13 cSv); the plutonium-239 body content was estimated accordingly to the level of urine radionuclide excretion (from 0.4 kBq to 1.6 kBq, in average about 0.33 kBq). Muscle's hypertinsion and pathological great-toe reflexes in paretic legs and hands, hemianopsia, impressive and ataxic aphasia prevailed in the patients with ischemic brain strokes in system of internal carotid artery, exposed to radiation. The changes of muscle's tension, ataxia and nystagmus were marked more often in the professionals with ischemic brain strokes in system of vertebrobasilar artery. The illness proceeded more easy and with smaller frequency of frustration of consciousness and algesthesia, irrespective of a type ischemic brain strokes in the people exposed to ionizing radiation, than in patients of non-irradiated group. It was found that the arterial hypertension appeared to be the main risk factor for the brain stroke in both groups of patients (in 81.48% and 91.15% of cases). There was no marked differences in significance of risk factors and in main clinical parameters of various types of ischemic brain strokes among the patients professionally exposed to radiation in comparison with a control group. (author)

  13. Airway inflammation among compost workers exposed to actinomycetes spores

    Directory of Open Access Journals (Sweden)

    Kari Kulvik Heldal

    2015-05-01

    Full Text Available Objectives. To study the associations between exposure to bioaerosols and work-related symptoms, lung function and biomarkers of airway inflammation in compost workers. Materials and method. Personal full-shift exposure measurements were performed on 47 workers employed at five windrow plants (n=20 and five reactor plants (n=27. Samples were analyzed for endotoxins, bacteria, fungal and actinomycetes spores. Health examinations were performed on workers and 37 controls before and after work on the day exposure was measured. The examinations included symptoms recorded by questionnaire, lung function by spirometry and nasal dimensions by acoustic rhinometry (AR. The pneumoproteins CC16, SP-D and SP-A were measured in a blood sample drawn at the end of the day. Results. The levels of endotoxins (median 3 EU/m[sup]3[/sup] , range 0–730 EU/m[sup]3[/sup] and actinomycetes spores (median 0.2 × 10[sup]6[/sup] spores/m[sup]3[/sup] , range 0–590 × 10[sup]6[/sup] spores/m[sup]3[/sup] were significantly higher in reactor plants compared to windrow plants. However, windrow composting workers reported more symptoms than reactor composting workers, probably due to use of respiratory protection. Exposure-response relationships between actinomycetes spores exposure and respiratory effects, found as cough and nose irritation during a shift, was significantly increased (OR 4.3, 95% CI 1.1–16, OR 6.1, 95% CI 1.5–25, respectively, p<0.05 among workers exposed to 0.02–0.3 × 10[sup]6[/sup] actinomycetes spores/m 3 , and FEV1/FVC% decreased cross shift (b=–3.2, SE=1.5%, p<0.01. Effects were weaker in the highest exposed group, but these workers used respiratory protection, frequently limiting their actual exposure. No relationships were found between exposure and pneumoprotein concentrations. Conclusions. The major agent in the aerosol generated at compost plants was actinomycetes spores which was associated with work related cough symptoms and work

  14. Response of exposed bark and exposed lichen to an urban area

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, A.M.J. [Polytechnic Institute of Coimbra, Oliveira do Hospital (Portugal). Oliveira do Hospital College of Technology and Management; Freitas, M.C.; Canha, N. [URSN, Sacavem (Portugal). Inst. Tecnologico e Nuclear (ITN); Verburg, T.G.; Wolterbeek, H.T. [Technical Univ. of Delft (Netherlands). Dept. of Radiation, Radionuclides and Reactors

    2011-07-01

    The aim of this study is to understand emission sources of chemical elements using biomonitoring as a tool. The selected lichen and bark were respectively Parmotrema bangii and Criptomeria japonica, sampled in the pollution-free atmosphere of Azores (Sao Miguel island), Portugal, and were exposed in the courtyards of 22 basic schools of Lisbon. The exposure was from January to May 2008 and from June to October 2008 (designated through the text as winter and summer respectively). The chemical element concentrations were determined by INAA. Conductivity of the lichen samples was measured. Factor analysis (MCTTFA) was applied to winter/summer bark/lichen exposed datasets. Arsenic emission sources, soil with anthropogenic contamination, a Se source, traffic, industry, and a sea contribution, were identified. In lichens, a physiological source based on the conductivity values was found. The spatial study showed contribution of sources to specific school positioning. Conductivity values were high in summer in locations as international Lisbon airport and downtown. Lisbon is spatially influenced by marine air mass transportation. It is concluded that one air sampler in Lisbon might be enough to define the emission sources under which they are influenced. (orig.)

  15. Ecophysiological tolerance of duckweeds exposed to copper

    Energy Technology Data Exchange (ETDEWEB)

    Kanoun-Boule, Myriam [Centre for Functional Ecology, Department of Botany, University of Coimbra, Coimbra 3000-456 (Portugal)], E-mail: mkb@ci.uc.pt; Vicente, Joaquim A.F.; Nabais, Cristina [Centre for Functional Ecology, Department of Botany, University of Coimbra, Coimbra 3000-456 (Portugal); Prasad, M.N.V. [Department of Plant Sciences, University of Hyderabad, Hyderabad 500046 (India); Freitas, Helena [Centre for Functional Ecology, Department of Botany, University of Coimbra, Coimbra 3000-456 (Portugal)

    2009-01-18

    Although essential for plants, copper can be toxic when present in supra-optimal concentrations. Metal polluted sites, due to their extreme conditions, can harbour tolerant species and/or ecotypes. In this work we aimed to compare the physiological responses to copper exposure and the uptake capacities of two species of duckweed, Lemna minor (Lm(EC1)) and Spirodela polyrrhiza (SP), from an abandoned uranium mine with an ecotype of L. minor (Lm(EC2)) from a non-contaminated pond. From the lowest Cu concentration exposure (25 {mu}M) to the highest (100 {mu}M), Lm(EC2) accumulated higher amounts of copper than Lm(EC1) and SP. Dose-response curves showed that Cu content accumulated by Lm(EC2) increases linearly with Cu treatment concentrations (r{sup 2} = 0.998) whereas quadratic models were more suitable for Lm(EC1) and SP (r{sup 2} = 0.999 and r{sup 2} = 0.998 for Lm(EC1) and SP, respectively). A significant concentration-dependent decline of chlorophyll a (chl a) and carotenoid occurred as a consequence of Cu exposure. These declines were significant for Lm(EC2) exposed to the lowest Cu concentration (25 {mu}M) whereas for Lm(EC1) and SP a significant decrease in chl a and carotenoids was observed only at 50 and 100 {mu}M-Cu. Electric conductivity (EC) and malondialdehyde (MDA) content increased after Cu exposure, indicating oxidative stress. Significant increase of EC was observed in Lm(EC2) for all Cu concentrations whereas the increase for Lm(EC1) and SP became significant only after an exposure to 50 {mu}M-Cu. On the contrary, for Lm(EC1), SP, and Lm(EC2), MDA content significantly increased even at the lowest concentration. Protein content and catalase (CAT) activity showed a decrease with an increase in Cu concentration. For the species Lm(EC1) and SP, a significant effect of copper on CAT activity was observed only at the highest concentration (100 {mu}M-Cu) whereas, for Lm(EC2), this effect started to be significant after an exposure to 50 {mu

  16. Ecophysiological tolerance of duckweeds exposed to copper

    International Nuclear Information System (INIS)

    Kanoun-Boule, Myriam; Vicente, Joaquim A.F.; Nabais, Cristina; Prasad, M.N.V.; Freitas, Helena

    2009-01-01

    Although essential for plants, copper can be toxic when present in supra-optimal concentrations. Metal polluted sites, due to their extreme conditions, can harbour tolerant species and/or ecotypes. In this work we aimed to compare the physiological responses to copper exposure and the uptake capacities of two species of duckweed, Lemna minor (Lm(EC1)) and Spirodela polyrrhiza (SP), from an abandoned uranium mine with an ecotype of L. minor (Lm(EC2)) from a non-contaminated pond. From the lowest Cu concentration exposure (25 μM) to the highest (100 μM), Lm(EC2) accumulated higher amounts of copper than Lm(EC1) and SP. Dose-response curves showed that Cu content accumulated by Lm(EC2) increases linearly with Cu treatment concentrations (r 2 = 0.998) whereas quadratic models were more suitable for Lm(EC1) and SP (r 2 = 0.999 and r 2 = 0.998 for Lm(EC1) and SP, respectively). A significant concentration-dependent decline of chlorophyll a (chl a) and carotenoid occurred as a consequence of Cu exposure. These declines were significant for Lm(EC2) exposed to the lowest Cu concentration (25 μM) whereas for Lm(EC1) and SP a significant decrease in chl a and carotenoids was observed only at 50 and 100 μM-Cu. Electric conductivity (EC) and malondialdehyde (MDA) content increased after Cu exposure, indicating oxidative stress. Significant increase of EC was observed in Lm(EC2) for all Cu concentrations whereas the increase for Lm(EC1) and SP became significant only after an exposure to 50 μM-Cu. On the contrary, for Lm(EC1), SP, and Lm(EC2), MDA content significantly increased even at the lowest concentration. Protein content and catalase (CAT) activity showed a decrease with an increase in Cu concentration. For the species Lm(EC1) and SP, a significant effect of copper on CAT activity was observed only at the highest concentration (100 μM-Cu) whereas, for Lm(EC2), this effect started to be significant after an exposure to 50 μM-Cu. Superoxide dismutase (SOD) activity

  17. The role of damage analysis in the assessment of service-exposed components

    International Nuclear Information System (INIS)

    Bendick, W.; Muesch, H.; Weber, H.

    1987-01-01

    Components in power stations are subjected to service conditions under which creep processes take place limiting the component's lifetime by material exhaustion. To ensure a safe and economic plant operation it is necessary to get information about the exhaustion grade of single components as well as of the whole plant. A comprehensive lifetime assessment requests the complete knowledge of the service parameters, the component's deformtion behavior, and the change in material properties caused by longtime exposure to high service temperatures. A basis of evaluation is given by: 1) determination of material exhaustion by calculation, 2) investigation of the material properties, and 3) damage analysis. The purpose of this report is to show the role which damage analysis can play in the assessment of service-exposed components. As an example the test results of a damaged pipe bend will be discussed. (orig./MM)

  18. Characterisation of Ceramic-Coated 316LN Stainless Steel Exposed to High-Temperature Thermite Melt and Molten Sodium

    Science.gov (United States)

    Ravi Shankar, A.; Vetrivendan, E.; Shukla, Prabhat Kumar; Das, Sanjay Kumar; Hemanth Rao, E.; Murthy, S. S.; Lydia, G.; Nashine, B. K.; Mallika, C.; Selvaraj, P.; Kamachi Mudali, U.

    2017-11-01

    Currently, stainless steel grade 316LN is the material of construction widely used for core catcher of sodium-cooled fast reactors. Design philosophy for core catcher demands its capability to withstand corium loading from whole core melt accidents. Towards this, two ceramic coatings were investigated for its application as a layer of sacrificial material on the top of core catcher to enhance its capability. Plasma-sprayed thermal barrier layer of alumina and partially stabilised zirconia (PSZ) with an intermediate bond coat of NiCrAlY are selected as candidate material and deposited over 316LN SS substrates and were tested for their suitability as thermal barrier layer for core catcher. Coated specimens were exposed to high-temperature thermite melt to simulate impingement of molten corium. Sodium compatibility of alumina and PSZ coatings were also investigated by exposing samples to molten sodium at 400 °C for 500 h. The surface morphology of high-temperature thermite melt-exposed samples and sodium-exposed samples was examined using scanning electron microscope. Phase identification of the exposed samples was carried out by x-ray diffraction technique. Observation from sodium exposure tests indicated that alumina coating offers better protection compared to PSZ coating. However, PSZ coating provided better protection against high-temperature melt exposure, as confirmed during thermite melt exposure test.

  19. New materials

    International Nuclear Information System (INIS)

    Joshi, S.K.; Rao, C.N.R.; Tsuruta, T.

    1992-01-01

    The book contains the state-of-the art lectures delivered at the discussion meeting on new materials, a field in which rapid advances are taking place. The main objective of the meeting was to bring active scientists in this area from Japan and India together. The topics covered diverse aspects of modern materials including high temperature superconducting compounds. (M.G.B.)

  20. Materials science

    International Nuclear Information System (INIS)

    2002-01-01

    the document is a collection of papers on different aspects of materials science. It discusses many items such as semiconductors, surface properties and interfaces, construction and civil engineering, metallic materials, polymers and composites, biology and biomaterials, metallurgy etc.. - 1 - Document1 Document1

  1. Testing of abrasion materials

    International Nuclear Information System (INIS)

    Hummert, G.

    1983-01-01

    A method of abrasion testing according to ASTM C 704-76 a is presented for steel fibre concrete mortar, fusion-cast basalt and a surface coating material and results of practical interest are mentioned. Due to the high technical demands on these materials and their specific fields of application, the very first test already supplied interesting findings. From the user's point of view, the method is an interesting alternative to the common test methods, e.g. according to DIN 52 108 (wheel test according to Boehme). In English-speaking countries, testing according to ASTM is often mandatory in the refractory industry in order to assure constant quality of refractory materials after setting. The method is characterized by good comparability and high accuracy of measurement. Only the test piece is exchanged while the test conditions remain constant, so that accurate information on the material studied is obtained. (orig.) [de

  2. Fissile material proliferation risk

    International Nuclear Information System (INIS)

    Dreicer, J.S.; Rutherford, D.A.

    1996-01-01

    The proliferation risk of a facility depends on the material attractiveness, level of safeguards, and physical protection applied to the material in conjunction with an assessment of the impact of the socioeconomic circumstances and threat environment. Proliferation risk is a complementary extension of proliferation resistance. The authors believe a better determination of nuclear proliferation can be achieved by establishing the proliferation risk for facilities that contain nuclear material. Developing a method that incorporates the socioeconomic circumstances and threat environment inherent to each country enables a global proliferation assessment. To effectively reduce the nuclear danger, a broadly based set of criteria is needed that provides the capability to relatively assess a wide range of nuclear related sites and facilities in different countries and still ensure a global decrease in proliferation risk for fissile material (plutonium and highly enriched uranium)

  3. Ready, set, move!

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    This year, the CERN Medical Service is launching a new public health campaign. Advertised by the catchphrase “Move! & Eat Better”, the particular aim of the campaign is to encourage people at CERN to take more regular exercise, of whatever kind.   The CERN annual relay race is scheduled on 24 May this year. The CERN Medical Service will officially launch its “Move! & Eat Better” campaign at this popular sporting event. “We shall be on hand on the day of the race to strongly advocate regular physical activity,” explains Rachid Belkheir, one of the Medical Service doctors. "We really want to pitch our campaign and answer any questions people may have. Above all we want to set an example. So we are going to walk the same circuit as the runners to underline to people that they can easily incorporate movement into their daily routine.” An underlying concern has prompted this campaign: during their first few year...

  4. Material Programming

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Boer, Laurens; Tsaknaki, Vasiliki

    2017-01-01

    . Consequently we ask what the practice of programming and giving form to such materials would be like? How would we be able to familiarize ourselves with the dynamics of these materials and their different combinations of cause and effect? Which tools would we need and what would they look like? Will we program......, and color, but additionally being capable of sensing, actuating, and computing. Indeed, computers will not be things in and by themselves, but embedded into the materials that make up our surroundings. This also means that the way we interact with computers and the way we program them, will change...... these computational composites through external computers and then transfer the code them, or will the programming happen closer to the materials? In this feature we outline a new research program that floats between imagined futures and the development of a material programming practice....

  5. Composite material

    Science.gov (United States)

    Hutchens, Stacy A [Knoxville, TN; Woodward, Jonathan [Solihull, GB; Evans, Barbara R [Oak Ridge, TN; O'Neill, Hugh M [Knoxville, TN

    2012-02-07

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  6. Materials science

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The Materials Science Division is engaged in research on physical properties of materials and the effects of radiation upon them. This involves solid state materials undergoing phase transitions, energy storing materials, and biomaterials. The Division also offers research facilities for M.S. and Ph.D. thesis work in the fields of physics, chemistry, materials, and radiation sciences in cooperation with the various colleges and departments of the UPR Mayaguez Campus. It is anticipated that it will serve as a catalyst in starting energy-related research programs in cooperation with UPR faculty, especially programs involving solar energy. To encourage and promote cooperative efforts, contact is maintained with former graduate students and with visiting scientists from Latin American research institutions

  7. Touching Materiality

    DEFF Research Database (Denmark)

    Rasmussen, Lisa Rosén

    2012-01-01

    Dripping ink pens, colourful paint on skin, vegetables pots on a school roof. In interviews with three generations of former school pupils, memories of material objects bore a relation to everyday school life in the past. Interwoven, these objects entered the memorising processes, taking...... the interviewer and interviewee beyond an exclusively linguistic understanding of memory. This article analyses how the shifting objects of materiality in personal and generational school memories connects to material as well as sensuous experiences of everyday school life and its complex processes of learning....... Drawing on anthropological writings, the article argues that the objects of materiality are part of important but non-verbalised memories of schooling. The Dutch philosopher Eelco Runia’s notions of presence and metonymy are incorporated as tools for approaching objects of materiality in memory studies....

  8. First result of deuterium retention in neutron-irradiated tungsten exposed to high flux plasma in TPE

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, Masashi, E-mail: Masashi.Shimada@inl.gov [Fusion Safety Program, Idaho National Laboratory, Idaho Falls, ID 83415 (United States); Hatano, Y. [Hydrogen Isotope Research Center, University of Toyama, Toyama 930-8555 (Japan); Calderoni, P. [Fusion Safety Program, Idaho National Laboratory, Idaho Falls, ID 83415 (United States); Oda, T. [Department of Nuclear Engineering and Management, The University of Tokyo, Tokyo 113-8656 (Japan); Oya, Y. [Radioscience Research Laboratory, Faculty of Science, Shizuoka University, Shizuoka 422-8529 (Japan); Sokolov, M. [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Zhang, K. [Hydrogen Isotope Research Center, University of Toyama, Toyama 930-8555 (Japan); Cao, G. [Department of Engineering Physics, University of Wisconsin-Madison, Madison, WI 53706 (United States); Kolasinski, R. [Hydrogen and Metallurgical Science Department, Sandia National Laboratories, Livermore, CA 94551 (United States); Sharpe, J.P. [Fusion Safety Program, Idaho National Laboratory, Idaho Falls, ID 83415 (United States)

    2011-08-01

    With the Japan-US joint research project Tritium, Irradiations, and Thermofluids for America and Nippon (TITAN), an initial set of tungsten samples (99.99% purity, A.L.M.T. Co.) were irradiated by high flux neutrons at 323 K to 0.025 dpa in High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). Subsequently, one of the neutron-irradiated tungsten samples was exposed to a high-flux deuterium plasma (ion flux: 5 x 10{sup 21} m{sup -2} s{sup -1}, ion fluence: 4 x 10{sup 25} m{sup -2}) in the Tritium Plasma Experiment (TPE) at Idaho National Laboratory (INL). The deuterium retention in the neutron-irradiated tungsten was 40% higher in comparison to the unirradiated tungsten. The observed broad desorption spectrum from neutron-irradiated tungsten and associated TMAP modeling of the deuterium release suggest that trapping occurs in the bulk material at more than three different energy sites.

  9. Loi constitutive chimioplastique pour le beton expose aux hautes temperatures

    Science.gov (United States)

    Hammoud, Rabah

    Concrete is the most widely used construction material in the world. Even though it has been used for several centuries, its behavior to high temperature remains to be understood. In the light of recent extreme events, including accidents, and arson, special attention has been focused on the performance of concrete in the fire safety assessment of buildings and tunnels. Fire represents one of the most severe conditions encountered during the life-time of a structure. Concrete exposed to high temperature can significantly jeopardize the structural integrity and load bearing capacity of the structure. Spalling of concrete remains one of the main issues to be addressed in the case of fire in buildings and tunnels. Successful modeling of this phenomenon depends not only on the accurate prediction of the temperature distribution through structural concrete but also on its mechanical response to the heating and boundaries restrains conditions and the migration of moisture and associated pore pressures. Therefore, it is necessary to develop a reliable formulation of concrete with all required information to understand its behavior during and after exposure to elevated temperature. It is also necessary to properly assess the effects of thermal degradation in order to develop predictive tools and validate design codes. Many structural problems can be adequately worthy by an elastoplastic model. The ultimate goal of this study is the development of a new constitutive model under a chemoplastic framework. To do this, an experimental program is carried out. The purpose of this program is twofold. First, it is essential to calibrate the proposed constitutive law that will be developed, and, second, for defining an inverse a problem. Usually, uniaxial and triaxial tests, conducted with confining pressure varied between 1.3 and 24 MPa and a temperature up to 700°C, allow us to identify the constitutive law parameters. This law reproduces the reduced field strength due to

  10. Almost Free Modules Set-Theoretic Methods

    CERN Document Server

    Eklof, PC

    1990-01-01

    This is an extended treatment of the set-theoretic techniques which have transformed the study of abelian group and module theory over the last 15 years. Part of the book is new work which does not appear elsewhere in any form. In addition, a large body of material which has appeared previously (in scattered and sometimes inaccessible journal articles) has been extensively reworked and in many cases given new and improved proofs. The set theory required is carefully developed with algebraists in mind, and the independence results are derived from explicitly stated axioms. The book contains exe

  11. Collection and preservation of fish and other materials exposed to pesticides

    Science.gov (United States)

    Cope, Oliver B.

    1960-01-01

    The effects of pesticides on fish have become improtant to fish conservation since World War II, when DDT first came into common use. With the development of other potent insecticides and the increasing use of massive dosages in more recent years, the threat to fish and fish foods has increased. Fishery biologists have conducted some studies on the effects of insecticides, but it has been impossible for fishery science to keep pace with chemistry and agriculture.

  12. Application of Idealized Materials Data for Calculation of Fire Exposed Concrete Constructions

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    2003-01-01

    test series from the literature and test series of 300 specimens made by the author and heated slowly in traditional ovens or rapidly by means of microwave power. Furthermore the methods have been compared to a great number of full-scale tests including 50 column tests and additional tests of slabs...

  13. Transcriptomic Response of Arabidopsis thaliana Exposed to CuO Nanoparticles, Bulk Material, and Ionic Copper

    Czech Academy of Sciences Publication Activity Database

    Landa, Přemysl; Dytrych, Pavel; Přerostová, Sylva; Petrová, Šárka; Vaňková, Radomíra; Vaněk, Tomáš

    2017-01-01

    Roč. 51, č. 18 (2017), s. 10814-10824 ISSN 0013-936X R&D Projects: GA MŠk LD14125; GA MŠk 8G15003 Institutional support: RVO:61389030 ; RVO:67985858 Keywords : METAL -OXIDE NANOPARTICLES * GENE-EXPRESSION * JASMONIC ACID Subject RIV: DN - Health Impact of the Environment Quality; CI - Industrial Chemistry, Chemical Engineering (UCHP-M) OBOR OECD: Plant sciences, botany; Chemical process engineering (UCHP-M) Impact factor: 6.198, year: 2016

  14. Trapping and detrapping of hydrogen in graphite materials exposed to hydrogen gas

    International Nuclear Information System (INIS)

    Atsumi, Hisao; Iseki, Michio; Shikama, Tatsuo.

    1994-01-01

    Measurements of hydrogen solubility have been performed for several unirradiated and neutron-irradiated graphite (and CFC) samples at temperatures between 973 and 1323 K under a ∼10 kPa hydrogen atmosphere. The hydrogen dissolution process has been studied and it is discussed here. The values of hydrogen solubility vary substantially among the samples up to about a factor of 16. A strong correlation has been observed between the values of hydrogen solubility and the degrees of graphitization determined by X-ray diffraction technique. The relation can be extended even for the neutron irradiated samples. Hydrogen dissolution into graphite can be explained with the trapping of hydrogen at defect sites (e.g. dangling carbon bonds) considering an equilibrium reaction between hydrogen molecules and the trapping sites. The migration of hydrogen in graphite is speculated to result from a sequence of detrapping and retrapping events with high energy activation processes. (author)

  15. Psychopharmacologic treatment of children prenatally exposed to drugs of abuse.

    Science.gov (United States)

    Hulvershorn, Leslie A; Schroeder, Kristen M; Wink, Logan K; Erickson, Craig A; McDougle, Christopher J

    2015-05-01

    This pilot study compared the pharmacologic treatment history and clinical outcomes observed in pediatric outpatients with psychiatric disorders exposed to drugs of abuse in utero to those of an age-matched, sex-matched and psychiatric disorder-matched, non-drug-exposed group. In this matched cohort study, medical records of children treated at an academic, child and adolescent psychiatry outpatient clinic were reviewed. Children with caregiver-reported history of prenatal drug exposure were compared with a non-drug-exposed control group being cared for by the same providers. Patients were rated with the Clinical Global Impressions-Severity scale (CGI-S) throughout treatment. The changes in pre-treatment and post-treatment CGI-S scores and the total number of medication trials were determined between groups. The drug-exposed group (n = 30) had a higher total number of lifetime medication trials compared with the non-drug-exposed group (n = 28) and were taking significantly more total medications, at their final assessment. Unlike the non-drug-exposed group, the drug-exposed group demonstrated a lack of clinical improvement. These results suggest that in utero drug-exposed children may be more treatment-refractory to or experience greater side effects from the pharmacologic treatment of psychiatric disorders than controls, although we cannot determine if early environment or drugs exposure drives these findings. Copyright © 2015 John Wiley & Sons, Ltd.

  16. Unusual presentation of necrotizing fasciitis in an HIV exposed infant

    African Journals Online (AJOL)

    ... presentation of NF, in this instance, it presented on the scalp, in an HIV exposed neonate. It also stressed the importance prompt diagnosis of all skin lesions in HIV exposed neonates, and the role of early diagnosis and aggressive multi disciplinary team management in salvaging NF which is a potentially fatal condition.

  17. Animal Cruelty by Children Exposed to Domestic Violence

    Science.gov (United States)

    Currie, Cheryl L.

    2006-01-01

    Objective: The first objective of this study was to determine if children exposed to domestic violence were significantly more likely to be cruel to animals than children not exposed to violence. The second was to determine if there were significant age and gender differences between children who were and were not cruel to animals. Method: A…

  18. 9 CFR 78.23 - Brucellosis exposed bison.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Brucellosis exposed bison. 78.23... AGRICULTURE INTERSTATE TRANSPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS BRUCELLOSIS Restrictions on Interstate Movement of Bison Because of Brucellosis § 78.23 Brucellosis exposed bison...

  19. 9 CFR 78.32 - Brucellosis exposed swine.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Brucellosis exposed swine. 78.32... AGRICULTURE INTERSTATE TRANSPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS BRUCELLOSIS Restrictions on Interstate Movement of Swine Because of Brucellosis § 78.32 Brucellosis exposed swine. (a...

  20. The Impact of Authentic Listening Materials on Elementary EFL Learners’ Listening Skills

    Directory of Open Access Journals (Sweden)

    Masoud Khalili Sabet

    2012-09-01

    Full Text Available Listening is one of the most pivotal skills, though; it is unjustly neglected throughout the literature. It was previously considered as passive skill but now those myths have been demystified. Therefore seeking the innovative trends for teaching and developing listening for EFL students are taken for granted. Lack of adequate exposure to listening and dearth of attention with regard to these issues sets the ground for authentic listening materials to fill the cited gaps in Iranian context. There have been controversial ideas based on studies in dealing with authentic listening materials. Their results ranged from totally abstinence to completely utilizing. This study intends to investigate the impact of authentic listening materials on listening skills of Elementary students at university level. To this aim, sixty students of university were randomly assigned to two groups. One group   was exposed to and received authentic listening materials (experimental group and the other groups received simplified listening materials (control group. A proficiency test (consisted of two sub-tests; listening comprehension and listening perception was used as a pretest to measure the students’ potential differences at outset of study. After the instruction sessions the same proficiency test was administered for both groups. Besides students feedback survey was given to experimental group to evaluate their attitudes and opinions regarding the materials. Analysis of quantitative study and comparing the mean scores of two groups via t-test showed that students who were exposed to authentic materials performed better in posttest. The analysis of feedback survey also denoted their satisfaction and positive attitudes to authentic listening materials.

  1. NIR spectroscopy as a tool for discriminating between lichens exposed to air pollution.

    Science.gov (United States)

    Casale, Monica; Bagnasco, Lucia; Giordani, Paolo; Mariotti, Mauro Giorgio; Malaspina, Paola

    2015-09-01

    Lichens are used as biomonitors of air pollution because they are extremely sensitive to the presence of substances that alter atmospheric composition. Fifty-one thalli of two different varieties of Pseudevernia furfuracea (var. furfuracea and var. ceratea) were collected far from local sources of air pollution. Twenty-six of these thalli were then exposed to the air for one month in the industrial port of Genoa, which has high levels of environmental pollution. The possibility of using Near-infrared spectroscopy (NIRS) for generating a 'fingerprint' of lichens was investigated. Chemometric methods were successfully applied to discriminate between samples from polluted and non-polluted areas. In particular, Principal Component Analysis (PCA) was applied as a multivariate display method on the NIR spectra to visualise the data structure. This showed that the difference between samples of different varieties was not significant in comparison to the difference between samples exposed to different levels of environmental pollution. Then Linear Discriminant Analysis (LDA) was carried out to discriminate between lichens based on their exposure to pollutants. The distinction between control samples (not exposed) and samples exposed to the air in the industrial port of Genoa was evaluated. On average, 95.2% of samples were correctly classified, 93.0% of total internal prediction (5 cross-validation groups) and 100.0% of external prediction (on the test set) was achieved. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Elevated urinary levels of kidney injury molecule-1 among Chinese factory workers exposed to trichloroethylene

    Science.gov (United States)

    Vermeulen, Roel; Huang, Hanlin; Rothman, Nathaniel; Lan, Qing

    2012-01-01

    Epidemiological studies suggest that trichloroethylene (TCE) exposure may be associated with renal cancer. The biological mechanisms involved are not exactly known although nephrotoxicity is believed to play a role. Studies on TCE nephrotoxicity among humans, however, have been largely inconsistent. We studied kidney toxicity in Chinese factory workers exposed to TCE using novel sensitive nephrotoxicity markers. Eighty healthy workers exposed to TCE and 45 comparable unexposed controls were included in the present analyses. Personal TCE exposure measurements were taken over a 2-week period before urine collection. Ninety-six percent of workers were exposed to TCE below the current US Occupational Safety and Health Administration permissible exposure limit (100 ppm 8h TWA), with a mean (SD) of 22.2 (35.9) ppm. Kidney injury molecule-1 (KIM-1) and Pi-glutathione S transferase (GST) alpha were elevated among the exposed subjects as compared with the unexposed controls with a strong exposure-response association between individual estimates of TCE exposure and KIM-1 (P < 0.0001). This is the first report to use a set of sensitive nephrotoxicity markers to study the possible effects of TCE on the kidneys. The findings suggest that at relatively low occupational exposure levels a toxic effect on the kidneys can be observed. This finding supports the biological plausibility of linking TCE exposure and renal cancer. Abbreviations:GSTglutathione-S-transferaseKIM-1kidney injury molecule-1NAGN-acetyl-beta-(d)-glucosaminidaseOVMorganic vapour monitoringTCEtrichloroethyleneVEGFvascular endothelial growth factor. PMID:22665366

  3. Intercomparison of JAERI Torso Phantom lung sets

    International Nuclear Information System (INIS)

    Kramer, Gary H.; Hauck, Barry M.

    2000-01-01

    During the course of an IAEA sponsored In Vivo intercomparison using the JAERI phantom the Human Monitoring Laboratory was able to intercompare thirteen lung sets made by three suppliers. One set consisted of sliced lungs with planar inserts containing different radionuclides. The others consisted of whole lung sets with the activity homogeneously distributed throughout the tissue substitute material. Radionuclides in the study were: natural uranium, 3% enriched uranium, 241 Am, 238 Pu, 239 Pu, 152 Eu, and 232 Th Except for the 241 Am (59.5 keV) and occasionally one of the 232 Th (209 keV) photopeaks, the lung sets that had radioactivity homogeneously distributed throughout the tissue equivalent lung tissue material showed good agreement. The 241 Am lung set gave a counting efficiency that appeared 25% too high for all overlay plate configurations. This was observed by other participants. It exemplifies that the manufacture of tissue substitute lung sets is still something of a black art. Despite all precautions, this lung set is either inhomogeneous or has had the wrong activity added. Heterogeneity can lead to an error in the activity estimate of a factor of three if the activity was severely localised due to improper mixing. A factor of 1.25, which appears to be the discrepancy, could easily be explained in this way. It will not be known for some time, however, what the true reason is as the participants are still waiting for the destructive analysis of this lung set to determine the 'true' activity. The sliced lungs ( 241 Am, 152 Eu, and U-nat) manufactured by the Human Monitoring Laboratory are in excellent agreement with the other lung sets. The advantages of sliced lung sets and planar sources are manifold. Activity can be distributed in a known and reproducible manner to mimic either a homogeneous or heterogeneous distribution in the lung. Short lived radionuclides can be used. Cost is much less than purchasing or manufacturing lung sets that have the

  4. Set discrimination of quantum states

    International Nuclear Information System (INIS)

    Zhang Shengyu; Ying Mingsheng

    2002-01-01

    We introduce a notion of set discrimination, which is an interesting extension of quantum state discrimination. A state is secretly chosen from a number of quantum states, which are partitioned into some disjoint sets. A set discrimination is required to identify which set the given state belongs to. Several essential problems are addressed in this paper, including the condition of perfect set discrimination, unambiguous set discrimination, and in the latter case, the efficiency of the discrimination. This generalizes some important results on quantum state discrimination in the literature. A combination of state and set discrimination and the efficiency are also studied

  5. Long-term follow up of children exposed in utero to nifedipine or ritodrine for the management of preterm labour

    NARCIS (Netherlands)

    Houtzager, B. A.; Hogendoorn, S. M.; Papatsonis, D. N. M.; Samsom, J. F.; van Geijn, H. P.; Bleker, O. P.; van Wassenaer, A. G.

    2006-01-01

    OBJECTIVE: To compare the long-term psychosocial and motor effects on children exposed in utero to nifedipine or ritodrine for the management of preterm labour. DESIGN: Randomised controlled trial. SETTING: Multicentre study in two university and one primary hospital in the Netherlands. POPULATION:

  6. Material Properties at Low Temperature

    International Nuclear Information System (INIS)

    Duthil, P

    2014-01-01

    From ambient down to cryogenic temperatures, the behaviour of materials changes greatly. Mechanisms leading to variations in electrical, thermal, mechanical, and magnetic properties in pure metals, alloys, and insulators are briefly introduced from a general engineering standpoint. Data sets are provided for materials commonly used in cryogenic systems for design purposes

  7. Material Properties at Low Temperature

    CERN Document Server

    Duthil, P

    2014-07-17

    From ambient down to cryogenic temperatures, the behaviour of materials changes greatly. Mechanisms leading to variations in electrical, thermal, mechanical, and magnetic properties in pure metals, alloys, and insulators are briefly introduced from a general engineering standpoint. Data sets are provided for materials commonly used in cryogenic systems for design purposes.

  8. Material Properties at Low Temperature

    Energy Technology Data Exchange (ETDEWEB)

    Duthil, P [Orsay, IPN (France)

    2014-07-01

    From ambient down to cryogenic temperatures, the behaviour of materials changes greatly. Mechanisms leading to variations in electrical, thermal, mechanical, and magnetic properties in pure metals, alloys, and insulators are briefly introduced from a general engineering standpoint. Data sets are provided for materials commonly used in cryogenic systems for design purposes.

  9. Self-reported hearing performance in workers exposed to solvents

    Directory of Open Access Journals (Sweden)

    Adrian Fuente

    2013-02-01

    Full Text Available OBJECTIVE: To compare hearing performance relating to the peripheral and central auditory system between solvent-exposed and non-exposed workers. METHODS: Forty-eight workers exposed to a mixture of solvents and 48 non-exposed control subjects of matched age, gender and educational level were selected to participate in the study. The evaluation procedures included: pure-tone audiometry (500 - 8,000 Hz, to investigate the peripheral auditory system; the Random Gap Detection test, to assess the central auditory system; and the Amsterdam Inventory for Auditory Disability and Handicap, to investigate subjects' self-reported hearing performance in daily-life activities. A Student t test and analyses of covariance (ANCOVA were computed to determine possible significant differences between solvent-exposed and non-exposed subjects for the hearing level, Random Gap Detection test and Amsterdam Inventory for Auditory Disability and Handicap. Pearson correlations among the three measures were also calculated. RESULTS: Solvent-exposed subjects exhibited significantly poorer hearing thresholds for the right ear than non-exposed subjects. Also, solvent-exposed subjects exhibited poorer results for the Random Gap Detection test and self-reported poorer listening performance than non-exposed subjects. Results of the Amsterdam Inventory for Auditory Disability and Handicap were significantly correlated with the binaural average of subject pure-tone thresholds and Random Gap Detection test performance. CONCLUSIONS: Solvent exposure is associated with poorer hearing performance in daily life activities that relate to the function of the peripheral and central auditory system.

  10. Infection Prevention and Control in Pediatric Ambulatory Settings.

    Science.gov (United States)

    Rathore, Mobeen H; Jackson, Mary Anne

    2017-11-01

    Since the American Academy of Pediatrics published its statement titled "Infection Prevention and Control in Pediatric Ambulatory Settings" in 2007, there have been significant changes that prompted this updated statement. Infection prevention and control is an integral part of pediatric practice in ambulatory medical settings as well as in hospitals. Infection prevention and control practices should begin at the time the ambulatory visit is scheduled. All health care personnel should be educated regarding the routes of transmission and techniques used to prevent the transmission of infectious agents. Policies for infection prevention and control should be written, readily available, updated every 2 years, and enforced. Many of the recommendations for infection control and prevention from the Centers for Disease Control and Prevention for hospitalized patients are also applicable in the ambulatory setting. These recommendations include requirements for pediatricians to take precautions to identify and protect employees likely to be exposed to blood or other potentially infectious materials while on the job. In addition to emphasizing the key principles of infection prevention and control in this policy, we update those that are relevant to the ambulatory care patient. These guidelines emphasize the role of hand hygiene and the implementation of diagnosis- and syndrome-specific isolation precautions, with the exemption of the use of gloves for routine diaper changes and wiping a well child's nose or tears for most patient encounters. Additional topics include respiratory hygiene and cough etiquette strategies for patients with a respiratory tract infection, including those relevant for special populations like patients with cystic fibrosis or those in short-term residential facilities; separation of infected, contagious children from uninfected children when feasible; safe handling and disposal of needles and other sharp medical devices; appropriate use of personal

  11. Soft sets combined with interval valued intuitionistic fuzzy sets of type-2 and rough sets

    Directory of Open Access Journals (Sweden)

    Anjan Mukherjee

    2015-03-01

    Full Text Available Fuzzy set theory, rough set theory and soft set theory are all mathematical tools dealing with uncertainties. The concept of type-2 fuzzy sets was introduced by Zadeh in 1975 which was extended to interval valued intuitionistic fuzzy sets of type-2 by the authors.This paper is devoted to the discussions of the combinations of interval valued intuitionistic sets of type-2, soft sets and rough sets.Three different types of new hybrid models, namely-interval valued intuitionistic fuzzy soft sets of type-2, soft rough interval valued intuitionistic fuzzy sets of type-2 and soft interval valued intuitionistic fuzzy rough sets of type-2 are proposed and their properties are derived.

  12. The differences in phenolic content in rivers exposed and non-exposed to anthropogenic contamination.

    Science.gov (United States)

    Michałowicz, Jaromir; Bukowska, Bozena; Duda, Wirgiliusz

    2008-03-01

    The purpose of the work was to determine the differences in a kind, number and concentrations of phenol, chlorophenols, chlorocatechols chlorinated methoxyphenols (chloroguaiacols, chlorosyringols) and 3,4,5-trichloroveratrole in the drainage of the Dzierzazna river, the flow non-exposed to anthropogenic contamination and in the Ner river, the flow exposed to anthropogenic pollution. The samples of water were collected in the Dzierzazna river in the Swoboda locality, the inflow of the Dzierzazna river - the Ciosenka river and, also, in the spring situated in Ciosny Sady locality. Water of the Ner river was collected in points near Łódź, Konstantynów, Poddebice and Dabie towns. The compounds were condensed (adsorbed) and eluted with methylene chloride on octadecyl C18 layer in a Baker Separex system. The obtained eluent was separated using the method of gas chromatography and analysed using mass spectrometry technique. In samples collected from the drainage of the Dzierzazna river phenol, chlorophenols, guaiacol, trichloroguaiacol, tetrachloroguaiacol, trichlorosyringol and 3,4,5-trichloroveratole were determined. As no anthropogenic sources are situated within the drainage of the Dzierzazna river, we may suppose that most of the determined compounds are mainly of natural origin. No or trace concentrations of chlorinated methoxyphenols were noted in the water of the Ner river, but a higher number, and concentrations of chlorophenols and additionally chlorocatechols were determined in this flow. It is also apparent that changes in a number and concentrations of phenols in the water of the Ner river did not prove a seasonal character, which was typical of the Dzierzazna drainage waters.

  13. Special set linear algebra and special set fuzzy linear algebra

    OpenAIRE

    Kandasamy, W. B. Vasantha; Smarandache, Florentin; Ilanthenral, K.

    2009-01-01

    The authors in this book introduce the notion of special set linear algebra and special set fuzzy Linear algebra, which is an extension of the notion set linear algebra and set fuzzy linear algebra. These concepts are best suited in the application of multi expert models and cryptology. This book has five chapters. In chapter one the basic concepts about set linear algebra is given in order to make this book a self contained one. The notion of special set linear algebra and their fuzzy analog...

  14. Polymeric matrix materials for infrared metamaterials

    Science.gov (United States)

    Dirk, Shawn M; Rasberry, Roger D; Rahimian, Kamyar

    2014-04-22

    A polymeric matrix material exhibits low loss at optical frequencies and facilitates the fabrication of all-dielectric metamaterials. The low-loss polymeric matrix material can be synthesized by providing an unsaturated polymer, comprising double or triple bonds; partially hydrogenating the unsaturated polymer; depositing a film of the partially hydrogenated polymer and a crosslinker on a substrate; and photopatterning the film by exposing the film to ultraviolet light through a patterning mask, thereby cross-linking at least some of the remaining unsaturated groups of the partially hydrogenated polymer in the exposed portions.

  15. Bin Set 1 Calcine Retrieval Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  16. Bin Set 1 Calcine Retrieval Feasibility Study

    International Nuclear Information System (INIS)

    Adams, R.D.; Berry, S.M.; Galloway, K.J.; Langenwalter, T.A.; Lopez, D.A.; Noakes, C.M.; Peterson, H.K.; Pope, M.I.; Turk, R.J.

    1999-01-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase

  17. Characterization of serrated yielding in service exposed Inconel 625 alloy

    International Nuclear Information System (INIS)

    Chatterjee, Arnomitra; Sharma, Garima; Chakravartty, J.K.

    2016-01-01

    The Alloy-625 is an austentic alloy which is being used for a variety of components in the aerospace, marine, chemical and nuclear industries. Tensile tests have been carried out on service exposed Inconel 625 ammonia cracker tube used at heavy water production plant to study the effect of microstructure on the mechanical properties of the material. Owing to temperature gradient during in service condition the microstructure was different in top (T), middle (M) and bottom (B) sections of the tube. The stress-strain curve obtained from conventional tensile test was found to exhibit serrated yielding with in an intermediate temperature regime of 250-600 °C. Both normal and inverse Portevin-Le Chatelier (PLC) effect could be identified at lower and higher temperature regime respectively. The normal behavior was associated with type (A+B) serrations and interstitial atom C was held responsible for the aging of dislocations in this region. On the contrary, the serrations were of type C in nature in inverse PLC regime and were attributed to the locking of dislocations by substitutional Mo atoms. Further analyses of activation energy and transition temperature for normal to inverse PLC dynamics, supported with Transmission Electron Microscopy (TEM) observation revealed that the basic deformation mechanism was different in M and B samples than that in the T samples. While the deformation in T samples were achieved by usual dislocation migration, in M and B samples it was through the propagation of stacking faults in large γ” precipitates. The transition temperature from normal to inverse PLC dynamics also varied appreciably in T samples than that of the M and B ones which could be explained in terms of the delayed depletion of Mo solutes in solution for T samples. (author)

  18. Simulation of processes in a SSNTD exposed by monoenergetic neutrons

    Science.gov (United States)

    Meyer, P.; Fromm, M.; Groetz, J. E.; Torrealba, F.; Chambaudet, A.

    1998-03-01

    The nuclear track technique is based on the registering of latent track ions in a solid state dielectric material (Solid State Nuclear Track Detector) which will be chemically etched in order to be observed and analysed using microscopic analysis tools. The purpose of this study is to observe how a polymeric detector irradiated by a neutron fluence can explain the intensity of ionizing radiations to which structures, electronic components or living organism are exposed. To do this, it is necessary to take into account on the one hand the production of ionizing particles in the detector, and on the other hand the efficacy of their detection. The model we propose must be able to link the number of etched tracks and their parameters to the neutron fluence. The use of both a Monte Carlo code which determines the number of recoil nuclei and a computed model of etched track parameters calculations is needed. The Monte Carlo code performs a simulation of neutron-nucleus elastic collision in the detector. We compute the number of recoil nuclei produced between the surface and a depth of 20 μm in the detector. The computer code assigns six pseudo-random numbers ( xE, zE, a, b, c, α) to each neutron having an energy EN and an angle of incidence and give the results of calculations. We used statistical tests (the moments of the origin of order n and of the average of order n, the χ2 test, the gap test, the Pearson test, the run-up run-down test and the serial test) to check the quality of our pseudo-random number generator. Finally, we will compare the calculated results of the response of the SSNTD (tracks cm -2) with the experimental ones to validate the simulation.

  19. Internal dosimetry for occupationally exposed personnel in nuclear medicine

    International Nuclear Information System (INIS)

    Garcia, M.T.; Alfaro, L.M.M.; Angeles, C.A.

    2013-01-01

    Internal dosimetry plays an important role in nuclear medicine dosimetry control of personnel occupationally exposed, and that in recent years there has been a large increase in the use of radionuclides both in medical diagnosis as radiotherapy. But currently, in Mexico and in many parts of the world, this internal dosimetry control is not performed. The Instituto Nacional de lnvestigaciones Nucleares de Mexico (ININ) together with the Centro Oncologico de Toluca (ISEMMYM) have developed a simple and feasible methodology for monitoring of personnel working in these facilities. It was aimed to carry out the dosimetry of the personnel, due to the incorporation of I-131, using the spectrometric devices that the hospital has, a gamma camera. The first step in this methodology was to make a thyroid phantom to meet the specifications of the ninth ANSI. This phantom is compared under controlled conditions with RMC- II phantom used for system calibration of the ININ internal dosimetry (ACCUSCAN - Ll), and with another phantom developed in Brazil with ANSI specifications, in order to determine the variations in measurements due to the density of the material of each of the phantoms and adjust to the system ACCUSCAN, already certificate. Furthermore, necessary counts were performed with the gamma camera of the phantom developed at ININ, with a standard source of 133 Ba which simulates the energy of 131 I. With these data, were determined the counting efficiencies for a distance of 15 to 20 cm between the surface of the phantom and the the plate of the detectors. Another important aspect was to determine the lower limit of detection (LLD). In this paper we present the results obtained from the detectors calibration of the gamma camera of the hospital.

  20. Magnetic behavioural change of silane exposed graphene nanoflakes

    Energy Technology Data Exchange (ETDEWEB)

    Ray, Sekhar C., E-mail: raysc@unisa.ac.za [Department of Physics, College of Science, Engineering and Technology, University of South Africa, Private Bag X6, Florida, 1710, Science Campus, Christiaan de Wet and Pioneer Avenue, Florida Park, Johannesburg 1710 (South Africa); Mishra, D. K. [Department of Physics, College of Science, Engineering and Technology, University of South Africa, Private Bag X6, Florida, 1710, Science Campus, Christiaan de Wet and Pioneer Avenue, Florida Park, Johannesburg 1710 (South Africa); Department of Physics, Institute of Technical Research and Education, Siksha ‘O’ Anusandhan University, Khandagiri Square, Bhubaneswar 751030, Odisha (India); Strydom, A. M. [Highly Correlated Matter Research Group, Physics Department, University of Johannesburg, PO Box 524, Auckland Park 2006 (South Africa); Papakonstantinou, P. [Nanotechnology and Integrated Bioengineering Center (NIBEC), School of Engineering, University of Ulster, Jordanstown Campus, Newtownabbey BT37 0QB (United Kingdom)

    2015-09-21

    The electronic structures and magnetic properties of graphene nanoflakes (GNFs) exposed to an organo-silane precursor [tetra-methyl-silane, Si(CH{sub 3}){sub 4}] were studied using atomic force microscopy, electron field emission (EFE), x-ray photoelectron spectroscopy (XPS), and magnetization. The result of XPS indicates that silyl radical based strong covalent bonds were formed in GNFs, which induced local structural relaxations and enhanced sp{sup 3} hybridization. The EFE measurements show an increase in the turn-on electric field from 9.8 V/μm for pure GNFs to 26.3 V/μm for GNFs:Si having highest Si/(Si + C) ratio ( ≅ 0.35) that also suggests an enhancement of the non-metallic sp{sup 3} bonding in the GNFs matrix. Magnetic studies show that the saturation magnetization (Ms) is decreased from 172.53 × 10{sup −6} emu/g for pure GNFs to 13.00 × 10{sup −6} emu/g for GNFs:Si with the highest Si/(Si + C) ratio 0.35, but on the other side, the coercivity (Hc) increases from 66 to 149 Oe due to conversion of sp{sup 2} → sp{sup 3}-hybridization along with the formation of SiC and Si-O bonding in GNFs. The decrease in saturation magnetization and increase in coercivity (Hc) in GNFs on Si-functionalization are another routes to tailor the magnetic properties of graphene materials for magnetic device applications.

  1. Nuclear materials

    International Nuclear Information System (INIS)

    1996-01-01

    In 1998, Nuclear Regulatory Authority of the Slovak Republic (NRA SR) performed 38 inspections, 25 of them were performed in co-operation with IAEA inspectors. There is no fresh nuclear fuel at Bohunice A-1 NPP at present. Fresh fuel of Bohunice V-1 and V-2 NPPs is inspected in the fresh fuel storage.There are 327 fresh fuel assemblies in Mochovce NPP fresh fuel storage. In addition to that, are also 71 small users of nuclear materials in Slovakia. In most cases they use: covers made of depleted uranium for non-destructive works, detection of level in production plants, covers for therapeutical sources at medical facilities. In. 1995, NRA SR issued 4 new licences for nuclear material withdrawal. In the next part manipulation with nuclear materials, spent fuel stores and illegal trafficking in nuclear materials are reported

  2. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    This book deals with the mechanical and physical behavior of composites as influenced by composite geometry. "Composite Materials" provides a comprehensive introduction for researchers and students to modern composite materials research with a special emphasis on the significance of phase geometry......, viscoelastic behavior, and internal stress states. Other physical properties considered are thermal and electrical conductivities, diffusion coefficients, dielectric constants and magnetic permeability. Special attention is given to the effect of pore shape on the mechanical and physical behavior of porous....... The book enables the reader to a better understanding of the behavior of natural composites, improvement of such materials, and design of new materials with prescribed properties. A number of examples are presented: Special composite properties considered are stiffness, shrinkage, hygro-thermal behavior...

  3. Hazardous materials

    Science.gov (United States)

    ... substances that could harm human health or the environment. Hazardous means dangerous, so these materials must be ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

  4. Propulsion materials

    Energy Technology Data Exchange (ETDEWEB)

    Wall, Edward J. [U.S. Dept. of Energy, Washington, D.C. (United States); Sullivan, Rogelio A. [U.S. Dept. of Energy, Washington, D.C. (United States); Gibbs, Jerry L. [U.S. Dept. of Energy, Washington, D.C. (United States)

    2008-01-01

    The Department of Energy’s (DOE’s) Office of Vehicle Technologies (OVT) is pleased to introduce the FY 2007 Annual Progress Report for the Propulsion Materials Research and Development Program. Together with DOE national laboratories and in partnership with private industry and universities across the United States, the program continues to engage in research and development (R&D) that provides enabling materials technology for fuel-efficient and environmentally friendly commercial and passenger vehicles.

  5. Encountering Materiality

    DEFF Research Database (Denmark)

    Svabo, Connie

    2016-01-01

    DHT researcher Connie Svabo and artist Charlotte Grum did a joint performance presentation titled Becoming Sheep, Becoming Animal at the international conference Encountering Materiality – Transdisciplinary Conversations, held in Geneve, Schwitzerland, June 23-25 2016.......DHT researcher Connie Svabo and artist Charlotte Grum did a joint performance presentation titled Becoming Sheep, Becoming Animal at the international conference Encountering Materiality – Transdisciplinary Conversations, held in Geneve, Schwitzerland, June 23-25 2016....

  6. Background Material

    DEFF Research Database (Denmark)

    Zandersen, Marianne; Hyytiäinen, Kari; Saraiva, Sofia

    This document serves as a background material to the BONUS Pilot Scenario Workshop, which aims to develop harmonised regional storylines of socio-ecological futures in the Baltic Sea region in a collaborative effort together with other BONUS projects and stakeholders.......This document serves as a background material to the BONUS Pilot Scenario Workshop, which aims to develop harmonised regional storylines of socio-ecological futures in the Baltic Sea region in a collaborative effort together with other BONUS projects and stakeholders....

  7. Droplet impaction on solid surfaces exposed to impinging jet fires

    Energy Technology Data Exchange (ETDEWEB)

    Kazemi, Zia

    2005-12-15

    The thermal response of hot surfaces exposed to impinging jet fire and subsequent impacting water droplets is investigated. The research was done mainly experimentally by utilizing three different concepts. This included experiments on a laboratory scale steel plate and large outdoor fire tests with a quadratic steel channel and steel plates. Besides the horizontal jet flame itself was characterized in a comprehensive study. As a comparative study, the last three types of the experiment were additionally modeled by the CFD-code Kameleon FireEx for validation of results. The purpose of the experiments done on bench scale steel plate (L x W x T : 300 x 200 x 8 mm) was mainly to map data on wetting temperature, water droplet size, droplet impingement angle, and droplet velocity prior to large scale jet fire tests. The droplet release angle normal to hot surface gives best cooling effect, when the surface is oriented in upright position. The partial wetting begins at about 165 degrees C. When the surface is positioned in horizontal plane, the droplet of about 5 mm in diameter wets the hot surface partially at around 240-250 degrees C within an impaction distance of 20 cm. At about 150 degrees C, the droplet is entirely attached to the surface with almost zero contact angle, and cools down the solid at a critical heat flux equivalent to 1750 kW/m{sup 2}. The cooling effectiveness is about 8 % with a Weber number of 68. Although in the event of horizontal channel (L x W x T : 1000 x 200 x 8 mm) water droplets were not applied, however, the knowledge gained with jet fire tests gave valuable information about temperature progress in solids (steels and insulation) and their response to impinging jet fire during long duration experiments. The temperature of the insulated area of the channel keeps 200 degrees C below that of the exposed surface, as long as the insulation material remained intact. Upon long test fire durations, the insulation either burns or degrades despite

  8. 9 CFR 53.3 - Appraisal of animals or materials.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Appraisal of animals or materials. 53.3 Section 53.3 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... animals or materials. (a) Animals affected by or exposed to disease, and materials required to be...

  9. Method for detecting radiation dose utilizing thermoluminescent material

    International Nuclear Information System (INIS)

    Miller, S.D.; McDonald, J.C.; Eichner, F.N.; Durham, J.S.

    1992-01-01

    The amount of ionizing radiation to which a thermoluminescent material has been exposed is determined by first cooling the thermoluminescent material and then optically stimulating the thermoluminescent material by exposure to light. Visible light emitted by the thermoluminescent material as it is allowed to warm up to room temperature is detected and counted. The thermoluminescent material may be annealed by exposure to ultraviolet light. 5 figs

  10. Adaptive strategies of remote systems operators exposed to perturbed camera-viewing conditions

    Science.gov (United States)

    Stuart, Mark A.; Manahan, Meera K.; Bierschwale, John M.; Sampaio, Carlos E.; Legendre, A. J.

    1991-01-01

    This report describes a preliminary investigation of the use of perturbed visual feedback during the performance of simulated space-based remote manipulation tasks. The primary objective of this NASA evaluation was to determine to what extent operators exhibit adaptive strategies which allow them to perform these specific types of remote manipulation tasks more efficiently while exposed to perturbed visual feedback. A secondary objective of this evaluation was to establish a set of preliminary guidelines for enhancing remote manipulation performance and reducing the adverse effects. These objectives were accomplished by studying the remote manipulator performance of test subjects exposed to various perturbed camera-viewing conditions while performing a simulated space-based remote manipulation task. Statistical analysis of performance and subjective data revealed that remote manipulation performance was adversely affected by the use of perturbed visual feedback and performance tended to improve with successive trials in most perturbed viewing conditions.

  11. Re-Setting Music Education's "Default Settings"

    Science.gov (United States)

    Regelski, Thomas A.

    2013-01-01

    This paper explores the effects and problems of one highly influential default setting of the "normal style template" of music education and proposes some alternatives. These do not require abandoning all traditional templates for school music. But re-setting the default settings does depend on reconsidering the promised function of…

  12. Survey on Urinary Levels of Aflatoxins in Professionally Exposed Workers

    Directory of Open Access Journals (Sweden)

    Fulvio Ferri

    2017-03-01

    Full Text Available Feed mill workers may handle or process maize contaminated with aflatoxins (AFs. This condition may lead to an unacceptable intake of toxins deriving from occupational exposure. This study assessed the serological and urinary levels of AFs in workers exposed to potentially contaminated dusts in two mills. From March to April 2014, blood and urine samples were collected, on Monday and Friday morning of the same working week from 29 exposed workers and 30 non-exposed controls. AFs (M1, G2, G1, B1, B2 and aflatoxicol (AFOH A were analyzed. Each subject filled in a questionnaire to evaluate potential food-borne exposures to mycotoxins. AFs contamination in environmental dust was measured in both plants. No serum sample was found to be positive. Seventy four percent of urine samples (73.7% revealed AFM1 presence. AFM1 mean concentration was 0.035 and 0.027 ng/mL in exposed and non-exposed workers, respectively (p = 0.432; the concentration was slightly higher in Friday’s than in Monday’s samples, in exposed workers, 0.040 versus (vs. 0.031 and non-exposed controls (0.030 vs. 0.024, p = 0.437. Environmental AFs contamination ranged from 7.2 to 125.4 µg/kg. The findings of this study reveal the presence of higher AFs concentration in exposed workers than in non-exposed controls, although these differences are to be considered consistent with random fluctuations.

  13. Mortality of aircraft maintenance workers exposed to trichloroethylene and other hydrocarbons and chemicals: extended follow up

    Science.gov (United States)

    Radican, Larry; Blair, Aaron; Stewart, Patricia; Wartenberg, Daniel

    2009-01-01

    Objective To extend follow-up of 14,455 workers from 1990 to 2000, and evaluate mortality risk from exposure to trichloroethylene (TCE) and other chemicals. Methods Multivariable Cox models were used to estimate relative risk for exposed vs. unexposed workers based on previously developed exposure surrogates. Results Among TCE exposed workers, there was no statistically significant increased risk of all-cause mortality (RR=1.04) or death from all cancers (RR=1.03). Exposure-response gradients for TCE were relatively flat and did not materially change since 1990. Statistically significant excesses were found for several chemical exposure subgroups and causes, and were generally consistent with the previous follow up. Conclusions Patterns of mortality have not changed substantially since 1990. While positive associations with several cancers were observed, and are consistent with the published literature, interpretation is limited due to the small numbers of events for specific exposures. PMID:19001957

  14. Setting research strategy on electromagnetic-field pollution of Ecuador

    International Nuclear Information System (INIS)

    Becerra, C.A.

    1989-01-01

    General population and occupational groups are being exposed to electromagnetic field (EMF) nonionizing radiation that come from all electric or electronic equipment that work either with extremely low frequency (ELF) or radiofrequency (RF) fields. This preoccupation has generated research and regulation plans in some countries int he world, in order to set a clear configuration of bioeffects and other environmental implications derived from exposures to ELF/RF EMF

  15. Reference material systems: a sourcebook for material assessment

    Energy Technology Data Exchange (ETDEWEB)

    Bhagat, N. (ed.)

    1976-12-01

    A reference set of data related to material systems and a framework for carrying out the material technologies assessment are presented. While the bulk of renewables have been considered in this report, the nonrenewable materials dealt with here include structural materials only, such as steel, aluminum, cement and concrete, and bricks. The complete data set is supposed to include material flows, energy requirements, capital and labor inputs, and environmental effects for each process that a resource must go through to become a useful material for an end use. Although effort has been made to obtain as much information as possible, considerable gaps in data, apparent throughout this report, could not be avoided. A new material technology can be evaluated by substituting that technology for appropriate elements of the reference materials system and calculating the net change in material resource, energy, capital and labor requirements, and environmental impacts. This combination of information thus serves as a means of evaluating the potential benefits to be gained by research in various material technologies.

  16. Influence of implantoplasty on stress distribution of exposed implants at different bone insertion levels

    Directory of Open Access Journals (Sweden)

    João Paulo Mendes TRIBST

    2017-12-01

    Full Text Available Abstract This study evaluated the effect of implantoplasty on different bone insertion levels of exposed implants. A model of the Bone Level Tapered implant (Straumann Institute, Waldenburg, Switzerland was created through the Rhinoceros software (version 5.0 SR8, McNeel North America, Seattle, WA, USA. The abutment was fixed to the implant through a retention screw and a monolithic crown was modeled over a cementation line. Six models were created with increasing portions of the implant threads exposed: C1 (1 mm, C2 (2 mm, C3 (3 mm, C4 (4 mm, C5 (5 mm and C6 (6 mm. The models were made in duplicates and one of each pair was used to simulate implantoplasty, by removing the threads (I1, I2, I3, I4, I5 and I6. The final geometry was exported in STEP format to ANSYS (ANSYS 15.0, ANSYS Inc., Houston, USA and all materials were considered homogeneous, isotropic and linearly elastic. To assess distribution of stress forces, an axial load (300 N was applied on the cusp. For the periodontal insert, the strains increased in the peri-implant region according to the size of the exposed portion and independent of the threads’ presence. The difference between groups with and without implantoplasty was less than 10%. Critical values were found when the inserted portion was smaller than the exposed portion. In the exposed implants, the stress generated on the implant and retention screw was higher in the models that received implantoplasty. For the bone tissue, exposure of the implant’s thread was a damaging factor, independent of implantoplasty. Implantoplasty treatment can be safely used to control peri-implantitis if at least half of the implant is still inserted in bone.

  17. Chemical effects and their consequences for individuals occupationally exposed to ionizing radiation

    International Nuclear Information System (INIS)

    Salvador, C.; Kahl, G.G.; Kühn, P.; Zottis, A.D.; Flôr, R.C.

    2017-01-01

    By legal determination, workers exposed to ionizing radiation should use individual dosimeters in the most exposed region of the body, designed to estimate the effective dose, as well as radiation protective clothing to minimize occupational exposures. Regarding dosimetry, in most cases it is perceived that the monthly values of exposure are within the limits of normality, however, even being below the limit can not rule out the possibility of damage that the low dose of ionizing radiation can cause. The objective of this article is to highlight the main chemical effects caused by exposure to ionizing radiation, especially biochemical damage in DNA, chromosomal aberrations and the correlation with the exposure of occupationally exposed individuals, as well as individuals from the public. A bibliographic search was carried out in indexed databases from February to April 2017 with the following descriptors: Radiation Ionizing, DNA Damage and Occupational Exposure. In the 'Science Direct' database were found 1205 articles, in the 'Scopus' 19 articles, in the 'Web of Science' 83 articles, in the 'PubMed' 22 articles and in the 'VHL' 60 articles related to the theme. It was concluded that exposure to ionizing radiation can affect the DNA molecule despite its repair mechanisms, which may result in genotoxicity. It has been reported a correlation between occupationally exposed individuals and chromosomal aberrations, demonstrating that even low doses of ionizing radiation can compromise the genetic material integrity of exposed workers, leading to the need for a periodic cytogenetic study for this group of workers

  18. Ca2+ promoted the low transformation efficiency of plasmid DNA exposed to PAH contaminants.

    Directory of Open Access Journals (Sweden)

    Fuxing Kang

    Full Text Available The effects of interactions between genetic materials and polycyclic aromatic hydrocarbons (PAHs on gene expression in the extracellular environment remain to be elucidated and little information is currently available on the effect of ionic strength on the transformation of plasmid DNA exposed to PAHs. Phenanthrene and pyrene were used as representative PAHs to evaluate the transformation of plasmid DNA after PAH exposure and to determine the role of Ca(2+ during the transformation. Plasmid DNA exposed to the test PAHs demonstrated low transformation efficiency. In the absence of PAHs, the transformation efficiency was 4.7 log units; however, the efficiency decreased to 3.72-3.14 log units with phenanthrene/pyrene exposures of 50 µg · L(-1. The addition of Ca(2+ enhanced the low transformation efficiency of DNA exposed to PAHs. Based on the co-sorption of Ca(2+ and phenanthrene/pyrene by DNA, we employed Fourier-transform infrared spectroscopy (FTIR, X-ray photoelectron spectroscopy (XPS, and mass spectrometry (MS to determine the mechanisms involved in PAH-induced DNA transformation. The observed low transformation efficiency of DNA exposed to either phenanthrene or pyrene can be attributed to a broken hydrogen bond in the double helix caused by planar PAHs. Added Ca(2+ formed strong electrovalent bonds with "-POO(--" groups in the DNA, weakening the interaction between PAHs and DNA based on weak molecular forces. This decreased the damage of PAHs to hydrogen bonds in double-stranded DNA by isolating DNA molecules from PAHs and consequently enhanced the transformation efficiency of DNA exposed to PAH contaminants. The findings provide insight into the effects of anthropogenic trace PAHs on DNA transfer in natural environments.

  19. Consideration of epigenetic responses at organisms chronically exposed to low levels of radioactive substances

    International Nuclear Information System (INIS)

    Gombeau, Kevin

    2015-01-01

    This work integrates within the general framework of the European program COMET (7. Framework Programme EURATOM) and aims to assess the epigenetic responses, and particularly DNA methylation, during chronic exposure to low levels of radioactive materials within two particularly representative contexts of radioecological issues (i.e. uranium mining area and Fukushima post-accidental context). During a first experiment, zebra fish (Danio rerio) were exposed in laboratory controlled conditions to environmentally relevant concentrations of depleted uranium: 2 and 20 μg L"-"1. This experiment allowed an impact on the genomic DNA methylation to be demonstrated, mainly in exposed males, which increased with the duration and level of exposure. In a second experiment, we observed an impact on DNA methylation patterns in the progeny of exposed parents, as well as a perturbation of transcriptomics (i.e. epigenetic processes, DNA damage signaling and repair pathways, embryogenesis) and histological damage in larvae skeletal muscle from exposed parents. The methods developed were applied to the second context focusing on the study of biological effects induced by radionuclides emitted following the Fukushima Daiichi nuclear power plant accident. The analyses performed on the Japanese tree frog (Hyla japonica) revealed a positive correlation between the total dose of radiation absorbed by these frogs (correlated to "1"3"7Cs accumulation), hyper-methylation of genomic DNA as well as increasing damage to mitochondrial DNA. This work highlighted the sensitivity of epigenetic responses in different biological models exposed to low levels of radionuclides. Additionally, these epigenetic modifications are stable over the time and involved in the transfer of the parental toxicity of depleted uranium. As such, the epigenetic marks could be used to further characterize adaptation mechanisms and potential trans-generational effects induced by radionuclides. (author)

  20. Electronic Materials Science

    Science.gov (United States)

    Irene, Eugene A.

    2005-02-01

    A thorough introduction to fundamental principles and applications From its beginnings in metallurgy and ceramics, materials science now encompasses such high- tech fields as microelectronics, polymers, biomaterials, and nanotechnology. Electronic Materials Science presents the fundamentals of the subject in a detailed fashion for a multidisciplinary audience. Offering a higher-level treatment than an undergraduate textbook provides, this text benefits students and practitioners not only in electronics and optical materials science, but also in additional cutting-edge fields like polymers and biomaterials. Readers with a basic understanding of physical chemistry or physics will appreciate the text's sophisticated presentation of today's materials science. Instructive derivations of important formulae, usually omitted in an introductory text, are included here. This feature offers a useful glimpse into the foundations of how the discipline understands such topics as defects, phase equilibria, and mechanical properties. Additionally, concepts such as reciprocal space, electron energy band theory, and thermodynamics enter the discussion earlier and in a more robust fashion than in other texts. Electronic Materials Science also features: An orientation towards industry and academia drawn from the author's experience in both arenas Information on applications in semiconductors, optoelectronics, photocells, and nanoelectronics Problem sets and important references throughout Flexibility for various pedagogical needs Treating the subject with more depth than any other introductory text, Electronic Materials Science prepares graduate and upper-level undergraduate students for advanced topics in the discipline and gives scientists in associated disciplines a clear review of the field and its leading technologies.

  1. MOTIVATION: Goals and Goal Setting

    Science.gov (United States)

    Stratton, Richard K.

    2005-01-01

    Goal setting has great impact on a team's performance. Goals enable a team to synchronize their efforts to achieve success. In this article, the author talks about goals and goal setting. This articles complements Domain 5--Teaching and Communication (p.14) and discusses one of the benchmarks listed therein: "Teach the goal setting process and…

  2. Nanoscale Ionic Materials

    KAUST Repository

    Rodriguez, Robert; Herrera, Rafael; Archer, Lynden A.; Giannelis, Emmanuel P.

    2008-01-01

    Polymer nanocomposites (nanoparticles dispersed in a polymer matrix) have been the subject of intense research for almost two decades in both academic and industrial settings. This interest has been fueled by the ability of nanocomposites to not only improve the performance of polymers, but also by their ability to introduce new properties. Yet, there are still challenges that polymer nanocomposites must overcome to reach their full potential. In this Research News article we discuss a new class of hybrids termed nanoparticle ionic materials (NIMS). NIMS are organic-inorganic hybrid materials comprising a nanoparticle core functionalized with a covalently tethered ionic corona. They are facilely engineered to display flow properties that span the range from glassy solids to free flowing liquids. These new systems have unique properties that can overcome some of the challenges facing nanocomosite materials. © 2008 WILEY-VCH Verlag GmbH & Co. KGaA.

  3. Material and Virtuality

    DEFF Research Database (Denmark)

    Kruse Aagaard, Anders

    2015-01-01

    Through tangible experiments this paper discusses the dialogues between digital architectural drawing and the process of materialisation. The paper sets op the spans between virtual and actual and control and uncertainty making these oppositions a combined spaces where information between a digital...... world and a physical world can interchange. The paper suggest an approach where an overlapping of virtuality and the tangible material output from digital fabrication machines create a method of using materialisation tools as instruments to connect the reality of materials and to an exploring process...... through these experiments is both tangible and directly connected to real actions in digital drawing or material processing but also the base for theoretical contemplations of the relation between virtual and actual and control and uncertainty....

  4. Nanoscale Ionic Materials

    KAUST Repository

    Rodriguez, Robert

    2008-11-18

    Polymer nanocomposites (nanoparticles dispersed in a polymer matrix) have been the subject of intense research for almost two decades in both academic and industrial settings. This interest has been fueled by the ability of nanocomposites to not only improve the performance of polymers, but also by their ability to introduce new properties. Yet, there are still challenges that polymer nanocomposites must overcome to reach their full potential. In this Research News article we discuss a new class of hybrids termed nanoparticle ionic materials (NIMS). NIMS are organic-inorganic hybrid materials comprising a nanoparticle core functionalized with a covalently tethered ionic corona. They are facilely engineered to display flow properties that span the range from glassy solids to free flowing liquids. These new systems have unique properties that can overcome some of the challenges facing nanocomosite materials. © 2008 WILEY-VCH Verlag GmbH & Co. KGaA.

  5. Care of HIV-exposed and HIV-infected neonates

    African Journals Online (AJOL)

    However, further reduction in MTCT may be possible if newborns at high risk of acquiring HIV ... infants of breastfeeding mothers with newly diagnosed HIV infection, dual NVP/ .... birth HIV DNA PCR testing for HIV-exposed low birth weight.

  6. UDS in lymphocytes of occupationally radiation exposed persons

    International Nuclear Information System (INIS)

    Tuschl, H.; Kovac, R.

    1982-01-01

    To determine a possible effect of low dose radiation on DNA repair processes, peripheral lymphocytes of mine workers exposed to 222 Rn in the thermal gallery of Badgastein (Austria) and employees of the Austrian Research Centre Seibersdorf, exposed to varying doses of gamma radiation, were investigated. The capacity for unscheduled DNA synthesis (UDS) induced by in vitro UV irradiation was measured by autoradiography of isolated lymphocytes of exposed persons and unexposed controls. In all 222 Rn-exposed mine workers a significant increase of UDS above control values could be observed. Gamma irradiation 31 mrad had a significant effect on UDS, indicating a stimulation of DNA repair capability by chronic low dose exposure. (Author)

  7. Pulmonary function evaluations of dogs exposed to uranium ore dust

    International Nuclear Information System (INIS)

    Loscutoff, S.M.; Buschbom, R.L.; Palmer, R.F.; Cross, F.T.

    1980-01-01

    Pulmonary function evaluations were conducted on dogs exposed to carnotite uranium ore dust. Significant changes were detected in the slope of the single-breath N 2 washout curve, suggesting an uneven distribution of ventilation

  8. Administrative norms on radiofrequency radiation for occupationally exposed persons

    International Nuclear Information System (INIS)

    Saxeboel, G.

    1982-01-01

    The report presents a proposal for administrative norms on radiofrequency (RF) radiation for occupationally exposed persons. The norms establish maximum allowable field exposure in a frequency range from 1 MHz too 300 GHz. (RF)

  9. Layered materials

    Science.gov (United States)

    Johnson, David; Clarke, Simon; Wiley, John; Koumoto, Kunihito

    2014-06-01

    Layered compounds, materials with a large anisotropy to their bonding, electrical and/or magnetic properties, have been important in the development of solid state chemistry, physics and engineering applications. Layered materials were the initial test bed where chemists developed intercalation chemistry that evolved into the field of topochemical reactions where researchers are able to perform sequential steps to arrive at kinetically stable products that cannot be directly prepared by other approaches. Physicists have used layered compounds to discover and understand novel phenomena made more apparent through reduced dimensionality. The discovery of charge and spin density waves and more recently the remarkable discovery in condensed matter physics of the two-dimensional topological insulating state were discovered in two-dimensional materials. The understanding developed in two-dimensional materials enabled subsequent extension of these and other phenomena into three-dimensional materials. Layered compounds have also been used in many technologies as engineers and scientists used their unique properties to solve challenging technical problems (low temperature ion conduction for batteries, easy shear planes for lubrication in vacuum, edge decorated catalyst sites for catalytic removal of sulfur from oil, etc). The articles that are published in this issue provide an excellent overview of the spectrum of activities that are being pursued, as well as an introduction to some of the most established achievements in the field. Clusters of papers discussing thermoelectric properties, electronic structure and transport properties, growth of single two-dimensional layers, intercalation and more extensive topochemical reactions and the interleaving of two structures to form new materials highlight the breadth of current research in this area. These papers will hopefully serve as a useful guideline for the interested reader to different important aspects in this field and

  10. Electronic materials

    CERN Document Server

    Kwok, H L

    2010-01-01

    The electronic properties of solids have become of increasing importance in the age of information technology. The study of solids and materials, while having originated from the disciplines of physics and chemistry, has evolved independently over the past few decades. The classical treatment of solid-state physics, which emphasized classifications, theories and fundamental physical principles, is no longer able to bridge the gap between materials advances and applications. In particular, the more recent developments in device physics and technology have not necessarily been driven by new conc

  11. Micronuclei frequency in children exposed to environmental mutagens: a review

    DEFF Research Database (Denmark)

    Neri, Monica; Fucic, Aleksandra; Knudsen, Lisbeth E

    2003-01-01

    Cytogenetic monitoring has been traditionally used for the surveillance of populations exposed to genotoxic agents. In recent years sensitivity problems emerged in surveys of populations exposed to low levels of mutagens, and therefore alternative approaches have been explored. Biomonitoring....... The limited number of published papers indicates that the conduct of properly designed studies on the effect of environmental pollutants in children may be difficult. This review confirmed the usefulness of MN assay in biomonitoring studies conducted in children, revealing that in many circumstances...

  12. Epidemiological studies of some populations exposed to ionizing radiation

    International Nuclear Information System (INIS)

    Weeks, J.L.

    1985-08-01

    During 1984 September 19 and 20, a meeting was held at the Whiteshell Nuclear Research Establishment, Pinawa, Manitoba to discuss current epidemiological studies of populations exposed to low levels of ionizing radiation. Twelve representatives from three countries attended the meeting and eleven papers were extensively discussed. The majority of these papers described studies of populations occupationally exposed to radiation. The report contains summaries of the papers presented and of the discussions that took place

  13. Behavioural changes in mice exposed to low level microwave fields

    International Nuclear Information System (INIS)

    Goiceanu, C.; Gradinaru, F.; Danulescu, R.; Balaceanu, G.; Sandu, D. D.; Avadanei, O. G.

    2001-01-01

    The aim of our study is to point out some changes in mice behaviour due possibly to exposure to low-level microwave fields. Animals spontaneous behaviour were monitored and the exploring behaviour and motor activity were assessed. Ten selected Swiss male mice were exposed to low-level microwave fields of about 1 mW/cm 2 power density for a relatively long period of time (13 weeks), comparing to their lifetime. The exposure system consists in a transverse electromagnetic (TEM) Cell. A control lot of ten Swiss male mice was used. All twenty mice were selected to be of same age and of 202 g initial body weight. Each animal was placed in his own holder. The behaviour of the animals, from both exposed and control lots, was assessed by using a battery of three behavioural tests. The test sessions were performed every two weeks. During exposure period it was recorded a progressive but moderate loss of motor activity for both exposed and controls, probably due to weight gain and aging. Concerning exploratory activity there is a significant difference between control and exposed animals. Control mice had approximately constant performances in time. On the other hand exposed mice showed a progressive decrease in time of their exploratory ability. Motor activity of exposed animals does not seem to be affected by microwave exposure, in spite of moderate loss in time of motor activity in both lots, as long as it was recorded a quite similar evolution. The difference in performances of exposed and controls concerning exploratory activity seem to emphasise an effect of long-term low-level microwave exposure. The progressive loss in time of exploratory activity of exposed mice, in contrast with controls, could be due to the interference of microwaves with central nervous activity. (authors)

  14. Ethylene thiourea: thyroid function in two groups of exposed workers

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.M.

    1984-08-01

    Ethylene thiourea is manufactured at one factory in the United Kingdom and is mixed into masterbatch rubber at another. Clinical examinations and thyroid function tests were carried out over a period of three years on eight process workers and five mixers and on matched controls. The results show that the exposed mixers, but not exposed process workers, have significantly lower levels of total thyroxine (T4) than the controls. One mixer had an appreciably raised level of thyroid stimulation hormone (TSH).

  15. Ethylene thiourea: thyroid function in two groups of exposed workers.

    Science.gov (United States)

    Smith, D M

    1984-08-01

    Ethylene thiourea is manufactured at one factory in the United Kingdom and is mixed into masterbatch rubber at another. Clinical examinations and thyroid function tests were carried out over a period of three years on eight process workers and five mixers and on matched controls. The results show that the exposed mixers, but not exposed process workers, have significantly lower levels of total thyroxine (T4) than the controls. One mixer had an appreciably raised level of thyroid stimulation hormone (TSH).

  16. Effect of amusement park rides on programmable shunt valve settings.

    Science.gov (United States)

    Strahle, Jennifer; Collins, Kelly; Stetler, William R; Smith, Brandon W; Garton, Thomas; Garton, Catherine; Garton, Hugh J L; Maher, Cormac O

    2013-01-01

    Magnetically programmable shunt valves are susceptible to environmental factors including magnetic fields and accelerative forces. It is unknown if rollercoasters with or without magnetic brakes or linear induction motors (LIMs) are capable of altering the setting of a programmable shunt valve. Two different valve types (type A, n = 10; type B, n = 9) were tested at varying resistance settings in 2 trials on 6 different amusement park rides including 2 rides with LIMs, 2 rides with magnetic brakes, and 2 rides without magnetic technology. The performance level of valve type A and the setting of valve type B changed on rollercoasters with magnets (A = 2.5% [2/80]; B = 5.6% [4/72]) and without magnets (A = 7.5% [3/40]; B = 2.8% [1/36]). Neither valve setting changed when exposed to a Ferris wheel or during ambulation throughout the park. Magnetically programmable valves are susceptible to changes in pressure settings when exposed to amusement park rides with elevated vertical gravitational forces, irrespective of the presence of LIMs or magnetic brakes. © 2013 S. Karger AG, Basel.

  17. process setting models for the minimization of costs defectives

    African Journals Online (AJOL)

    Dr Obe

    determine the mean setting so as to minimise the total loss through under-limit complaints and loss of sales and goodwill as well as over-limit losses through excess materials and rework costs. Models are developed for the two types of setting of the mean so that the minimum costs of losses are achieved. Also, a model is ...

  18. Set-Up and Punchline as Figure and Ground

    DEFF Research Database (Denmark)

    Keisalo, Marianna Päivikki

    the two that cannot be resolved by appeal to either set-up or punchline, but traps thought between them in an ‘epistemological problem’ as comedian Louis CK put it. For comedians, set-ups and punchlines are basic tools, practical and concrete ways to create and organize material. They are also familiar...

  19. Restorative effects of virtual nature settings.

    Science.gov (United States)

    Valtchanov, Deltcho; Barton, Kevin R; Ellard, Colin

    2010-10-01

    Previous research regarding the potential benefits of exposing individuals to surrogate nature (photographs and videos) has found that such immersion results in restorative effects such as increased positive affect, decreased negative affect, and decreased stress. In the current experiment, we examined whether immersion in a virtual computer-generated nature setting could produce restorative effects. Twenty-two participants were equally divided between two conditions, while controlling for gender. In each condition, participants performed a stress-induction task, and were then immersed in virtual reality (VR) for 10 minutes. The control condition featured a slide show in VR, and the nature experimental condition featured an active exploration of a virtual forest. Participants in the nature condition were found to exhibit increased positive affect and decreased stress after immersion in VR when compared to those in the control condition. The results suggest that immersion in virtual nature settings has similar beneficial effects as exposure to surrogate nature. These results also suggest that VR can be used as a tool to study and understand restorative effects.

  20. SCM Paste Samples Exposed To Aggressive Solutions. Cementitious Barriers Partnership

    International Nuclear Information System (INIS)

    Foster, T.

    2014-01-01

    This report summarizes experimental work performed by SIMCO Technologies Inc. (SIMCO) as part of the Cementitious Barriers Partnership (CBP) project. The test series followed an experimental program dedicated to the study of ordinary Portland cement (OPC) hydrated cement pastes exposed to aggressive solutions. In the present study, the scope is extended to hydrated cement pastes incorporating supplementary cementitious materials (SCM) such as fly ash and ground granulated blast furnace slag (GGBFS). Also, the range of aggressive contact solutions was expanded. The experimental program aimed at testing aggressive contact solutions that more closely mimic the chemical composition of saltstone pore solution. Five different solutions, some of which incorporated high levels of carbonate and nitrate, were placed in contact with four different hydrated cement paste mixes. In all solutions, 150 mmol/L of SO 4 2- (14 400 ppm) were present. The solutions included different pH conditions and different sodium content. Two paste mixes were equivalent to Vault 1/4 and Vault 2 concrete mixes used at SRS in storage structures. Two additional paste mixes, cast at the same water-to-cement ratio and using the same cements but without SCMs, were also tested. The damage evolution in samples was monitored using ultrasonic pulse velocity (UPV) and mass measurements. After three and twelve months of exposure conditions, samples were taken out of solution containers and analyzed to perform migration tests and porosity measurements. Globally, results were in line with the previous study and confirmed that high pH may limit the formation of some deleterious phases like gypsum. In this case, ettringite may form but is not necessarily associated with damage. However, the high concentration of sodium may be associated with the formation of an AFm-like mineral called U-phase. The most significant evidences of damage were all associated with the Vault 2 paste analog. This material

  1. SCM Paste Samples Exposed To Aggressive Solutions. Cementitious Barriers Partnership

    Energy Technology Data Exchange (ETDEWEB)

    Foster, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2014-12-01

    This report summarizes experimental work performed by SIMCO Technologies Inc. (SIMCO) as part of the Cementitious Barriers Partnership (CBP) project. The test series followed an experimental program dedicated to the study of ordinary Portland cement (OPC) hydrated cement pastes exposed to aggressive solutions. In the present study, the scope is extended to hydrated cement pastes incorporating supplementary cementitious materials (SCM) such as fly ash and ground granulated blast furnace slag (GGBFS). Also, the range of aggressive contact solutions was expanded. The experimental program aimed at testing aggressive contact solutions that more closely mimic the chemical composition of saltstone pore solution. Five different solutions, some of which incorporated high levels of carbonate and nitrate, were placed in contact with four different hydrated cement paste mixes. In all solutions, 150 mmol/L of SO42– (14 400 ppm) were present. The solutions included different pH conditions and different sodium content. Two paste mixes were equivalent to Vault 1/4 and Vault 2 concrete mixes used at SRS in storage structures. Two additional paste mixes, cast at the same water-to-cement ratio and using the same cements but without SCMs, were also tested. The damage evolution in samples was monitored using ultrasonic pulse velocity (UPV) and mass measurements. After three and twelve months of exposure conditions, samples were taken out of solution containers and analyzed to perform migration tests and porosity measurements. Globally, results were in line with the previous study and confirmed that high pH may limit the formation of some deleterious phases like gypsum. In this case, ettringite may form but is not necessarily associated with damage. However, the high concentration of sodium may be associated with the formation of an AFm-like mineral called U-phase. The most significant evidences of damage were all associated with the Vault 2 paste analog. This

  2. Thermal contribution of compact bone to intervening tissue-like media exposed to planar ultrasound

    Energy Technology Data Exchange (ETDEWEB)

    Moros, Eduardo G [Department of Radiation Oncology, Washington University, St Louis, MO 63108 (United States); Novak, Petr [Department of Radiation Oncology, Washington University, St Louis, MO 63108 (United States); Straube, William L [Department of Radiation Oncology, Washington University, St Louis, MO 63108 (United States); Kolluri, Prashant [Department of Radiation Oncology, Washington University, St Louis, MO 63108 (United States); Yablonskiy, Dmitriy A [Department of Radiology, Washington University, St Louis, MO 63108 (United States); Myerson, Robert J [Department of Radiation Oncology, Washington University, St Louis, MO 63108 (United States)

    2004-03-21

    than fourfold) were induced in soft tissue-like phantom materials adjacent (within {approx}5 mm) to a bovine bone as compared to similar experiments without bone inclusions. For low-power long-exposure experiments, where thermal conduction effects are significant, the thermal impact of bone reached at distances >10 mm from the bone surface (upstream of the bone). Therefore, we hypothesize that underlying bone exposed to planar ultrasound hyperthermia creates a high-temperature thermal boundary at depth that compensates for beam attenuation, thus producing more uniform temperature distribution in the intervening tissue layers. With appropriate technology, this finding may lead to improved thermal doses in superficial treatment sites such as the chest wall and the head/neck.

  3. Supplementary Material

    Indian Academy of Sciences (India)

    mraga

    1. Supplementary Material. A soluble-lead Redox Flow Battery with corrugated graphite sheet and reticulated vitreous carbon as positive and negative current collectors by A Banerjee et al (pp 163-. 170). Figure S1. SEM images for bare substrates: (a) graphite sheet, (b) 20 ppi RVC, (c) 30 ppi. RVC and (d) 45 ppi RVC.

  4. Emerging Materiality

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Breinbjerg, Morten; Pold, Søren

    2009-01-01

    The authors examine how materiality emerges from complex chains of mediation in creative software use. The primarily theoretical argument is inspired and illustrated by interviews with two composers of electronic music. The authors argue that computer mediated activity should not primarily be und...

  5. Atmospheric materiality

    DEFF Research Database (Denmark)

    Wieczorek, Izabela

    2016-01-01

    experience and, consequently, to the conceptual and methodological shifts in the production of space, and hence in the way we think about materiality. In this context, architectural space is understood as a contingent construction – a space of engagement that appears to us as a result of continuous...

  6. Absorbant materials

    International Nuclear Information System (INIS)

    Quetier, Monique.

    1978-11-01

    Absorbants play a very important part in the nuclear industry. They serve for the control, shut-down and neutron shielding of reactors and increase the capacity of spent fuel storage pools and of special transport containers. This paper surveys the usual absorbant materials, means of obtainment, their essential characteristics relating to their use and their behaviour under neutron irradiation [fr

  7. Innovative agricultural materials

    Directory of Open Access Journals (Sweden)

    L. S. Shibryaeva

    2016-01-01

    Full Text Available Development of ecodegradable materials and use of them in innovative technology of sowing of seeds of grain crops in a tape isan important and actual problem of polymeric chemistry. Material is affected by programmable destruction under the influence of natural factors taking into account the biochemical processes in a plant. At the present time in literature there are no the data about polymeric materials which can operate plants biochemical processes when contacting to root system of directly in the soil. The authors developed compositions on the basis of synthetic polymer - low density polyethylene (LDPE and biodegradable polymer - a polylactide (PLA. Thermophysical properties of ecofilms change under the influence of ultra-violet radiation. Photooxidation leads to cracking of samples with the raised maintenance of PLA. Temperature of melting of PLA decreases from 165 to 152 degrees Celsius (in some compositions to 137 degrees and crystallinity degrees lower on average by 20 percent. Thus the most considerable decrease in crystallinity (about 30 percent is noted in composition with a ratio of components of 50:50 mass percent. A composition formulation affects on the speed of destructive influence of moisture and an ultraviolet. The speed advantage of these processes is characteristic for the compositions containing from 30 to 60 mass percent of PLA. The soil samples with the maintenance of PLA more than 30 mass percent will be in less time exposed to biodegradation. Composition 50:50 has the greatest loss of weight equaled 18 percent. For other samples relative loss of weight makes 5-10 percent. The test for biodestruction showed considerable change of properties of polymeric samples of PLA- LDPE depending on mix composition. It means that it is possible to select such ratio of components at which material properties would conform to requirements imposed to agricultural appointment films.

  8. Presenting a Model for Setting in Narrative Fiction Illustration

    Directory of Open Access Journals (Sweden)

    Hajar Salimi Namin

    2017-12-01

    Full Text Available The present research aims at presenting a model for evaluating and enhancing training the setting in illustration for narrative fictions for undergraduate students of graphic design who are weak in setting. The research utilized expert’s opinions through a survey. The designed model was submitted to eight experts, and their opinions were used to have the model adjusted and improved. Used as research instruments were notes, materials in text books, papers, and related websites, as well as questionnaires. Results indicated that, for evaluating and enhancing the level of training the setting in illustration for narrative fiction to students, one needs to extract sub-indexes of setting. Moreover, definition and recognition of the model of setting helps undergraduate students of graphic design enhance the level of setting in their works skill by recognizing details of setting. Accordingly, it is recommended to design training packages to enhance these sub-indexes and hence improve the setting for narrative fiction illustration.

  9. Organic surfaces exposed by self-assembled organothiol monolayers: Preparation, characterization, and application

    Science.gov (United States)

    Kind, Martin; Wöll, Christof

    2009-07-01

    Organic surfaces play a major role in materials science. Most surfaces that we touch in our daily lives are made from organic materials, e.g., vegetables, fruit, skin, wood, and textiles made from natural fibers. In the context of biology, organic surfaces play a prominent role too, proteins docking onto cell surfaces are a good example. To better understand the characteristics of organic surfaces, including physico-chemical properties like wettability or chemical reactivities and physical properties like friction and lubrication, a structurally well-defined model system that can be investigated with numerous analytical techniques is desirable. In the last two decades, one particular system, self-assembled monolayers or SAMs, have demonstrated their suitability for this purpose. In particular, organothiols consisting of an organic molecule with an attached SH-group are well suited to fabricating structurally well-defined adlayers of monolayer thickness on gold substrates using a simple preparation procedure. These ultrathin monolayers expose an organic surface with properties that can be tailored by varying the type of organothiol employed. After a short introduction into the preparation of SAMs, this article provides an overview of the possibilities and limitations of organic surfaces exposed by Au-thiolate SAMs. Applications are as diverse as the metallization of organic surfaces, a fundamental problem in materials science, and the fabrication of surfaces that resist the adsorption of proteins. In addition to a number of different case studies, we will also discuss the most powerful analytical techniques needed to characterize these important model systems.

  10. Overview of nuclear materials transportation

    International Nuclear Information System (INIS)

    Grella, A.W.

    1986-01-01

    This presentation is an overview of transportation as it relates to one specific type of material, low specific activity (LSA) material. It is the predominant type of material that fits into the low-level waste category. An attempt is made to discuss how LSA is regulated, setting forth the requirements. First the general scheme of regulations are reviewed. In addition future changes in the regulations which will affect transportation of LSA materials and, which quite likely, will have an impact on R and D needs in this area are presented

  11. Hearing Loss in Persons Exposed and not Exposed to Occupational Noise.

    Science.gov (United States)

    Kovalova, Martina; Mrazkova, Eva; Sachova, Petra; Vojkovska, Kristyna; Tomaskova, Hana; Janoutova, Jana; Janout, Vladimir

    2016-04-01

    This study aimed to compare hearing loss in individuals at risk and those not at risk for occupational noise and to compare working loss by gender. The analysis used data from a current Czech Ministry of Health grant project called Epidemiological and Genetic Study of the Frequency of Hearing Loss (2011 to 2015; NT12246-5/2011). The analyzed sample comprised 4988 participants. Hearing was tested using pure-tone threshold audiometry, tympanometry, and measurement of the stapedius reflex. Females at risk and those not at risk for occupational noise who were younger than 44 years and older than 75 years were found to have no statistically significant differences at any pure-tone threshold audiometry frequency. In females aged 45 to 74 years, statistically significant differences were found. In males, hearing loss was observed as early as 18 years of age. When comparing males and females at no risk for occupational noise, there were no statistically significant differences at any of the frequencies in those younger than 29 years. In females aged 30 years or older, statistically significant differences were observed at various frequencies in all age groups. When comparing males and females at risk for occupational noise, statistically significant differences were more frequent than in employees not exposed to noise. Hearing loss in females does not significantly vary depending on occupational exposure. The opposite is true for males. However, the maximum differences in mean levels did not exceed 10 dB. It is therefore clear that noise is a preventable factor, and the use of personal protective equipment is warranted.

  12. Stability of solid oxide fuel cell materials

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, T.R.; Bates, J.L.; Chick, L.A. [Pacific Northwest Lab., Richland, WA (United States)

    1996-04-01

    Interconnection materials in a solid oxide fuel cell are exposed to both highly oxidizing conditions at the cathode and to highly reducing conditions at the anode. The thermal expansion characteristics of substituted lanthanum and yttrium chromite interconnect materials were evaluated by dilatometry as a function of oxygen partial pressures from 1 atm to 10{sup -18} atm, controlled using a carbon dioxide/hydrogen buffer.

  13. Friction Material Composites Materials Perspective

    CERN Document Server

    Sundarkrishnaa, K L

    2012-01-01

    Friction Material Composites is the first of the five volumes which strongly educates and updates engineers and other professionals in braking industries, research and test labs. It explains besides the formulation of design processes and its complete manufacturing input. This book gives an idea of mechanisms of friction and how to control them by designing .The book is  useful for designers  of automotive, rail and aero industries for designing the brake systems effectively with the integration of friction material composite design which is critical. It clearly  emphasizes the driving  safety and how serious designers should  select the design input. The significance of friction material component like brake pad or a liner as an integral part of the brake system of vehicles is explained. AFM pictures at nanolevel illustrate broadly the explanations given.

  14. Thermodynamic and kinetic modelling: creep resistant materials

    DEFF Research Database (Denmark)

    Hald, John; Korcakova, L.; Danielsen, Hilmar Kjartansson

    2008-01-01

    The use of thermodynamic and kinetic modelling of microstructure evolution in materials exposed to high temperatures in power plants is demonstrated with two examples. Precipitate stability in martensitic 9–12%Cr steels is modelled including equilibrium phase stability, growth of Laves phase part...

  15. Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials

    Directory of Open Access Journals (Sweden)

    Salwa Omar Bajunaid

    2016-01-01

    Conclusions: Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

  16. Materials at LANL

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Antoinette J [Los Alamos National Laboratory

    2010-01-01

    Exploring the physics, chemistry, and metallurgy of materials has been a primary focus of Los Alamos National Laboratory since its inception. In the early 1940s, very little was known or understood about plutonium, uranium, or their alloys. In addition, several new ionic, polymeric, and energetic materials with unique properties were needed in the development of nuclear weapons. As the Laboratory has evolved, and as missions in threat reduction, defense, energy, and meeting other emerging national challenges have been added, the role of materials science has expanded with the need for continued improvement in our understanding of the structure and properties of materials and in our ability to synthesize and process materials with unique characteristics. Materials science and engineering continues to be central to this Laboratory's success, and the materials capability truly spans the entire laboratory - touching upon numerous divisions and directorates and estimated to include >1/3 of the lab's technical staff. In 2006, Los Alamos and LANS LLC began to redefine our future, building upon the laboratory's established strengths and promoted by strongly interdependent science, technology and engineering capabilities. Eight Grand Challenges for Science were set forth as a technical framework for bridging across capabilities. Two of these grand challenges, Fundamental Understanding of Materials and Superconductivity and Actinide Science. were clearly materials-centric and were led out of our organizations. The complexity of these scientific thrusts was fleshed out through workshops involving cross-disciplinary teams. These teams refined the grand challenge concepts into actionable descriptions to be used as guidance for decisions like our LDRD strategic investment strategies and as the organizing basis for our external review process. In 2008, the Laboratory published 'Building the Future of Los Alamos. The Premier National Security Science Laboratory

  17. Research on Space Environmental Effect of Organic Composite Materials for Thermal Management of Satellites Using MC-50 Cyclotron

    Directory of Open Access Journals (Sweden)

    Dae-Weon Kim

    2005-12-01

    Full Text Available The organic material is one of the most popular material for the satellites and the spacecrafts in order to perform the thermal management, and to protect direct exposure from the space environment. The present paper observes material property changes of organic material under the space environment by using ground facilities. One of the representative organic thermal management material of satellites, 2 mil ITO(Indium Tin Oxide coated aluminized KAPTON was selected for experiments. In order to investigate the single parametric effect of protons in space environment, MC-50 cyclotron system in KIRAMS(Korea Institute of Radiological and Medical Science was utilized for the ion beam irradiation of protons and ion beam dose was set to the Very Large August 1972 EVENT model, the highest protons occurrence near the earth orbit in history. The energy of ion beam is fixed to 30MeV(mega electron volt, observed average energy, and the equivalent irradiance time conditions were set to 1-year, 3-year, 5-year and 10-year exposure in space. The procedure of analyses includes the measurement of the ultimate tensile strength for the assessment of quantitative degradation in material properties, and the imaging analyses of crystalline transformation and damages on the exposed surface by FE-SEM(Field Emission Scanning Electron Spectroscopy etc.

  18. Soil biological shield exposed to high energy neutrons; Zemlja kao bioloski stit od neutrona visokih energija

    Energy Technology Data Exchange (ETDEWEB)

    Simovic, R; Marinkovic, N [Institute of nuclear sciences Vinca, Belgrade (Yugoslavia)

    1993-04-15

    Shielding efficiency of soil biological shield exposed to high energy neutrons was investigated. Dose rate equivalents for neutrons, secondary gamma and gamma radiation were computed on the surface of soil slabs having different thicknesses. Yields of primary and secondary nuclear radiation in the total dose were evaluated. Influence of the incident neutron spectrum, water content and chemical composition of the material on its shielding efficiency was examined. It was found that the soil density and the water content determine the quality of biological shield, the influence of other factors being less important. Comparison of shielding efficiencies for soil with sand, brick and ordinary concrete shields was done.

  19. Degradation Analysis of Field-Exposed Photovoltaic Modules with Non-Fluoropolymer-Based Backsheets

    Energy Technology Data Exchange (ETDEWEB)

    Kempe, Michael D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fairbrother, Andrew [National Institute of Standards and Technology (NIST); Julien, Scott [Northeastern University; Wan, Kai-Tak [Northeastern University; Ji, Liang [Underwriters Laboratory; Boyce, Kenneth [Underwriters Laboratory; Merzlic, Sebastien [Arkema; Lefebvre, Amy [Arkema; O' Brien, Greg [Arkema; Wang, Yu [Case Western Reserve University; Bruckman, Laura [Case Western Reserve University; French, Roger [Case Western Reserve University; Gu, Xiaohong [National Institute of Standards and Technology (NIST)

    2017-08-23

    The selection of polymeric materials utilized in photovoltaic (PV) modules has changed relatively little since the inception of the PV industry, with ethylene-vinyl acetate (EVA), polyethylene terephthalate (PET), and fluoropolymer-based laminates being the most widely adopted primary components of the encapsulant and backsheet materials. The backsheet must serve to electrically insulate the solar cells and protect them from the effects of weathering. Due to continued downward pressure on cost, other polymeric materials are being formulated to withstand outdoor exposure for use in backsheets to replace either the PET film, the fluoropoymer film, or both. Because of their relatively recent deployment, less is known about their reliability and if they are durable enough to fulfill the greater than or equal to 25 year warranties of current PV modules. This work presents a degradation analysis of field-exposed modules with polyamide- and polyester-based backsheets. Modules were exposed for up to five years in different geographic locations: USA (Maryland, Ohio), China, and Italy. Surface and cross-sectional analysis included visual inspection, colorimetry, glossimetry, and Fourier-transform infrared spectroscopy. Each module experienced different types of degradation depending on the exposure site, even for the same material and module brand. For instance, the polyamide-based backsheet experienced hairline cracking and greater yellowing and chemical changes in China (Changsu, humid subtropical climate), while in Italy (Rome, hot-summer Mediterranean climate) it underwent macroscopic cracking and greater losses in gloss. Spectroscopic studies have permitted identification of degradation products and changes in polymer structure over time. Comparisons are made to fielded modules with fluoropolymer-based backsheets, as well as backsheet materials in accelerated laboratory exposures. Implications for qualification testing and service life prediction of the non

  20. Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets

    Science.gov (United States)

    Fairbrother, Andrew; Julien, Scott; Wan, Kai-Tak; Ji, Liang; Boyce, Kenneth; Merzlic, Sebastien; Lefebvre, Amy; O'Brien, Greg; Wang, Yu; Bruckman, Laura; French, Roger; Kempe, Michael; Gu, Xiaohong

    2017-08-01

    The selection of polymeric materials utilized in photovoltaic (PV) modules has changed relatively little since the inception of the PV industry, with ethylene-vinyl acetate (EVA), polyethylene terephthalate (PET), and fluoropolymer-based laminates being the most widely adopted primary components of the encapsulant and backsheet materials. The backsheet must serve to electrically insulate the solar cells and protect them from the effects of weathering. Due to continued downward pressure on cost, other polymeric materials are being formulated to withstand outdoor exposure for use in backsheets to replace either the PET film, the fluoropoymer film, or both. Because of their relatively recent deployment, less is known about their reliability and if they are durable enough to fulfill the >=25 year warranties of current PV modules. This work presents a degradation analysis of field-exposed modules with polyamide- and polyester-based backsheets. Modules were exposed for up to five years in different geographic locations: USA (Maryland, Ohio), China, and Italy. Surface and cross-sectional analysis included visual inspection, colorimetry, glossimetry, and Fourier-transform infrared spectroscopy. Each module experienced different types of degradation depending on the exposure site, even for the same material and module brand. For instance, the polyamide-based backsheet experienced hairline cracking and greater yellowing and chemical changes in China (Changsu, humid subtropical climate), while in Italy (Rome, hot-summer Mediterranean climate) it underwent macroscopic cracking and greater losses in gloss. Spectroscopic studies have permitted identification of degradation products and changes in polymer structure over time. Comparisons are made to fielded modules with fluoropolymer-based backsheets, as well as backsheet materials in accelerated laboratory exposures. Implications for qualification testing and service life prediction of the non-fluoropolymer-based backsheets are