WorldWideScience

Sample records for series integrated helmet

  1. Power Measurements for Microvision, Inc., Aircrew Integrated Helmet System Scanning Laser Helmet-Mounted Display

    National Research Council Canada - National Science Library

    Rash, Clarence

    2002-01-01

    ...) technology based on scanning lasers. Under this program, Microvision, Inc., Bothell, Washington, has developed a scanning laser HMD prototype for use with the Aircrew Integrated Helmet System (AIHS...

  2. 40° image intensifier tubes in an integrated helmet system

    Science.gov (United States)

    Schreyer, Herbert; Boehm, Hans-Dieter V.; Svedevall, B.

    1993-12-01

    EUROCOPTER has been under contract to the French and German ministries of defence for five years to develop the TIGER, a second generation anti-tank helicopter. A piloting thermal imager has been installed on a steerable platform in the helicopter nose in order to achieve the possibility of flying round the clock. In addition to this sensor, which is sensitive at a wavelength of 10 micrometers , the German side has proposed using an Integrated Helmet System in the PAH 2. This helmet, manufactured by GEC-Marconi Avionics, incorporates two cathode ray tubes (CRT) and two image intensifier tubes which allow the pilot to use an additional sensor in the visible and near infrared spectrum. The electronic part will be built by Teldix. EUROCOPTER DEUTSCHLAND has received the first demonstrator of this helmet for testing in the EUROCOPTER Visionics Laboratory. Later, the C-prototype will be integrated into a BK 117 helicopter (AVT Avionik Versuchstrager). This new helmet has a field of view of 40 degree(s), and exit pupil of 15 mm and improved possibilities of adjusting the optical part. Laboratory tests have been carried out to test important parameters like optical resolution under low light level conditions, field of view, eye relief or exit pupil. The CRT channels have been tested for resolution, distortion, vignetting and homogeneity. The requirements and the properties of the helmet, test procedures and the results of these tests are presented in the paper.

  3. Respiratory Protection Performance: Impact of Helmet Integration

    Science.gov (United States)

    2016-09-01

    usage. In addition, NVG usage did not result in significant differences within the integrated or nonintegrated configurations. Figure 4 illustrates the...DISTRIBUTION LIST The following individuals and organizations were provided with one Adobe portable document format (pdf) electronic

  4. A series of student design projects for improving and modernizing safety helmets

    NARCIS (Netherlands)

    Beurden, van K.M.M. (Karin); Boer, de J. (Johannes); Stilma, M. (Margot); Teeuw, W.B. (Wouter)

    2014-01-01

    The Saxion Research Centre for Design and Technology employs many students during research projects. This paper discusses a series of student design projects on safety helmets in the Safety@Work project. At construction sites workers are required to wear personal protective equipment during their

  5. Methods of estimating the effect of integral motorcycle helmets on physiological and psychological performance.

    Science.gov (United States)

    Bogdan, Anna; Sudoł-Szopińska, Iwona; Luczak, Anna; Konarska, Maria; Pietrowski, Piotr

    2012-01-01

    This article proposes a method for a comprehensive assessment of the effect of integral motorcycle helmets on physiological and cognitive responses of motorcyclists. To verify the reliability of commonly used tests, we conducted experiments with 5 motorcyclists. We recorded changes in physiological parameters (heart rate, local skin temperature, core temperature, air temperature, relative humidity in the space between the helmet and the surface of the head, and the concentration of O(2) and CO(2) under the helmet) and in psychological parameters (motorcyclists' reflexes, fatigue, perceptiveness and mood). We also studied changes in the motorcyclists' subjective sensation of thermal comfort. The results made it possible to identify reliable parameters for assessing the effect of integral helmets on performance, i.e., physiological factors (head skin temperature, internal temperature and concentration of O(2) and CO(2) under the helmet) and on psychomotor factors (reaction time, attention and vigilance, work performance, concentration and a subjective feeling of mood and fatigue).

  6. Helmet blastometer

    Energy Technology Data Exchange (ETDEWEB)

    Moss, William C; King, Michael J

    2015-03-24

    A helmet blastometer for characterizing the direction, speed, magnitude, and duration of a blast event to determine the likelihood of blast-induced traumatic brain injury (biTBI). Time of arrival (TOA) gage sensors are mounted on a rigid outer shell of the helmet each producing a TOA signal in response to a fast rising blast induced positive pressure change above a predetermined threshold. A receiver analyzes the positive pressure changes from the gages to determine direction, speed, and magnitude of a blast. Other TOA gauge sensors can be used to produce a TOA signal in response to a negative pressure change below a predetermined threshold. The positive and negative pressure change TOA signals are used to determine blast duration. A second set of internal contact pressure sensors is connected to an inner liner of the helmet to detect contact pressure on a user's head to determine if biTBI has been sustained.

  7. Motorcycle helmet use laws

    Science.gov (United States)

    2006-01-01

    The National Highway Traffic Safety Administration (NHTSA) encourages States to enact legislation that requires all motorcycle riders to wear helmets. Motorcycle helmets provide the best protection from head injury for motorcyclists involved in traff...

  8. A-integrable martingale sequences and Walsh series

    International Nuclear Information System (INIS)

    Skvortsov, V A

    2001-01-01

    A sufficient condition for a Walsh series converging to an A-integrable function f to be the A-Fourier's series of f is stated in terms of uniform A-integrability of a martingale subsequence of partial sums of the Walsh series. Moreover, the existence is proved of a Walsh series that converges almost everywhere to an A-integrable function and is not the A-Fourier series of its sum

  9. Build Your Own Equiluminance Helmet

    OpenAIRE

    Connolly, Salammbo; Connolly, Denis; Cleary, Anne; Herman, Laura; Cavanagh, Patrick

    2017-01-01

    A wearable ?helmet? version of the S cone isolating technique was constructed to explore vision at equiluminance. For my high school summer science project, I visited parks and streets while wearing the helmet and report that the helmet appears to have captured the main properties described for the large-scale, more cumbersome stage version.

  10. Differential protective effects of motorcycle helmets against head injury.

    Science.gov (United States)

    Singleton, Michael D

    2017-05-19

    Although numerous observational studies have demonstrated a protective effect of motorcycle helmets against head injury, the degree of protection against specific head injury types remains unclear. Experimental biomechanics studies involving cadavers, animals, and computer models have established that head injuries have varying etiologies. This retrospective cross-sectional study compared helmet protection against skull fracture, cerebral contusion, intracranial hemorrhage, and cerebral concussion in a consecutive series of motorcycle operators involved in recent traffic crashes in Kentucky. Police collision reports linked to hospital inpatient and emergency department (ED) claims were analyzed for the period 2008 to 2012. Motorcycle operators with known helmet use who were not killed at the crash scene were included in the study. Helmet use was ascertained from the police report. Skull fracture, cerebral contusion, intracranial hemorrhage, and cerebral concussion were identified from International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM) codes on the claims records. The relative risks of each type of head injury for helmeted versus unprotected operators were estimated using generalized estimating equations. Helmets offer substantial protection against skull fracture (relative risk [RR] = 0.31, 95% confidence interval [CI], 0.23, 0.34), cerebral contusion (RR = 0.29, 95% CI, 0.16, 0.53), and intracranial hemorrhage (RR = 0.47, 95% CI, 0.35, 0.63). The findings pertaining to uncomplicated concussion (RR = 0.80, 95% CI, 0.64, 1.01) were inconclusive. A modest protective effect (20% risk reduction) was suggested by the relative risk estimate, but the 95% confidence interval included the null value. Motorcycle helmets were associated with a 69% reduction in skull fractures, 71% reduction in cerebral contusion, and 53% reduction in intracranial hemorrhage. This study finds that current motorcycle helmets do not protect equally against

  11. An introduction to Fourier series and integrals

    CERN Document Server

    Seeley, Robert T

    2006-01-01

    This compact guide emphasizes the relationship between physics and mathematics, introducing Fourier series in the way that Fourier himself used them: as solutions of the heat equation in a disk. 1966 edition.

  12. Impact of Soldier Helmet Configuration on Survivability

    Science.gov (United States)

    2011-03-01

    helmet cannot sit too low, which is evident when the helmet covers the eyebrows and the helmet interferes with eyewear . The helmet should remain in...agencies, academia, and private industry have also aided in model development. ORCA is a high-resolution computerized personnel casualty model that can

  13. Table of integrals, series, and products

    CERN Document Server

    Gradshteyn, I S; Zwillinger, Daniel; Moll, Victor

    2015-01-01

    The eighth edition of the classic Gradshteyn and Ryzhik is an updated completely revised edition of what is acknowledged universally by mathematical and applied science users as the key reference work concerning the integrals and special functions. The book is valued by users of previous editions of the work both for its comprehensive coverage of integrals and special functions, and also for its accuracy and valuable updates. Since the first edition, published in 1965, the mathematical content of this book has significantly increased due to the addition of new material, though the size of the book has remained almost unchanged. The new 8th edition contains entirely new results and amendments to the auxiliary conditions that accompany integrals and wherever possible most entries contain valuable references to their source.

  14. GPK helmets protecting from gas and dusts

    Energy Technology Data Exchange (ETDEWEB)

    Il' inskii, Eh.G.; Kogan, Yu.A.; Mazanenko, V.P.

    1983-08-01

    The GPK protective helmet with an integrated respirator system protecting a miner's respiratory system and eyes from gases and dusts is described. The system uses compressed air from the mine compressed air system. Air is supplied to the respirator by an elastic rubber pipe to 30 m long. The air cools the miner's head under the helmet and passes between a protective shield and the miner's face protecting eyes and the respiratory system. Air supply ranges from 100 to 150 l/min. The air supplied to the respirator is cleaned by a filter. The GPK system weighs 1.2 kg. The system has been tested under laboratory conditions and in two coal mines under operational conditions at longwall faces and during mine drivage. Tests showed that the GPK guarantees efficient cooling and protection from dust. Design of the GPK helmet with a respirator is shown in two schemes. Technical specifications of the system are given.

  15. Stochastic B-series and order conditions for exponential integrators

    DEFF Research Database (Denmark)

    Arara, Alemayehu Adugna; Debrabant, Kristian; Kværnø, Anne

    2018-01-01

    We discuss stochastic differential equations with a stiff linear part and their approximation by stochastic exponential integrators. Representing the exact and approximate solutions using B-series and rooted trees, we derive the order conditions for stochastic exponential integrators. The resulting...

  16. Extending "the Rubber Rope": Convergent Series, Divergent Series and the Integrating Factor

    Science.gov (United States)

    McCartney, Mark

    2013-01-01

    A well-known mathematical puzzle regarding a worm crawling along an elastic rope is considered. The resulting generalizations provide examples for use in a teaching context including applications of series summation, the use of the integrating factor for the solution of differential equations, and the evaluation of definite integrals. A number of…

  17. Exact series expansions, recurrence relations, properties and integrals of the generalized exponential integral functions

    International Nuclear Information System (INIS)

    Altac, Zekeriya

    2007-01-01

    Generalized exponential integral functions (GEIF) are encountered in multi-dimensional thermal radiative transfer problems in the integral equation kernels. Several series expansions for the first-order generalized exponential integral function, along with a series expansion for the general nth order GEIF, are derived. The convergence issues of these series expansions are investigated numerically as well as theoretically, and a recurrence relation which does not require derivatives of the GEIF is developed. The exact series expansions of the two dimensional cylindrical and/or two-dimensional planar integral kernels as well as their spatial moments have been explicitly derived and compared with numerical values

  18. Evaluation of the Effects of Variable Helmet Weight on Human Response During Lateral +Gy Impact

    National Research Council Canada - National Science Library

    Perry, Chris

    2003-01-01

    .... A series of tests was conducted by AFRL/HEPA on a horizontal impulse accelerator using human subjects to investigate the effects of helmet inertial properties on human response to short duration...

  19. Rapid Calculation of Spacecraft Trajectories Using Efficient Taylor Series Integration

    Science.gov (United States)

    Scott, James R.; Martini, Michael C.

    2011-01-01

    A variable-order, variable-step Taylor series integration algorithm was implemented in NASA Glenn's SNAP (Spacecraft N-body Analysis Program) code. SNAP is a high-fidelity trajectory propagation program that can propagate the trajectory of a spacecraft about virtually any body in the solar system. The Taylor series algorithm's very high order accuracy and excellent stability properties lead to large reductions in computer time relative to the code's existing 8th order Runge-Kutta scheme. Head-to-head comparison on near-Earth, lunar, Mars, and Europa missions showed that Taylor series integration is 15.8 times faster than Runge- Kutta on average, and is more accurate. These speedups were obtained for calculations involving central body, other body, thrust, and drag forces. Similar speedups have been obtained for calculations that include J2 spherical harmonic for central body gravitation. The algorithm includes a step size selection method that directly calculates the step size and never requires a repeat step. High-order Taylor series integration algorithms have been shown to provide major reductions in computer time over conventional integration methods in numerous scientific applications. The objective here was to directly implement Taylor series integration in an existing trajectory analysis code and demonstrate that large reductions in computer time (order of magnitude) could be achieved while simultaneously maintaining high accuracy. This software greatly accelerates the calculation of spacecraft trajectories. At each time level, the spacecraft position, velocity, and mass are expanded in a high-order Taylor series whose coefficients are obtained through efficient differentiation arithmetic. This makes it possible to take very large time steps at minimal cost, resulting in large savings in computer time. The Taylor series algorithm is implemented primarily through three subroutines: (1) a driver routine that automatically introduces auxiliary variables and

  20. Advanced Extravehicular Helmet Assembly, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The current NASA spacesuit community is focusing on utilizing a 13" hemispherical helmet for the next generation of extravehicular activity spacesuits. This helmet...

  1. Modular liquid-cooled helmet liner for thermal comfort

    Science.gov (United States)

    Williams, B. A.; Shitzer, A.

    1974-01-01

    A modular liquid-cooled helmet liner made of eight form-fitting neoprene patches was constructed. The liner was integrated into the sweatband of an Army SPH-4 helicopter aircrew helmet. This assembly was tested on four subjects seated in a hot (47 C), humid (40%) environment. Results indicate a marked reduction in the rate of increase of physiological body functions. Rectal temperature, weight loss, heart rate, and strain indices are all reduced to approximately 50% of uncooled levels. The cooling liner removed from 10% to 30% of total metabolic heat produced. This study also demonstrated the technical feasilibity of using a cooling liner in conjunction with a standard hard helmet. Potential applications of the cooling liner in thermally stressful environments are numerous, notably for helicopter and other aircrews.

  2. Application of Taylor-Series Integration to Reentry Problems with Wind

    NARCIS (Netherlands)

    Bergsma, Michiel; Mooij, E.

    2016-01-01

    Taylor-series integration is a numerical integration technique that computes the Taylor series of state variables using recurrence relations and uses this series to propagate the state in time. A Taylor-series integration reentry integrator is developed and compared with the fifth-order

  3. Injury outcome among helmeted and non-helmeted motorcycle ...

    African Journals Online (AJOL)

    users are vulnerable on the road and are at high risk of death resulting from head ..... time of injury sustained head injury reflecting its importance in prevention of head .... WHO (2006) Helmets: A Road Safety Manual for Decision-makers and ...

  4. Ultrasonic series resonant converter with integrated L-C-T

    CSIR Research Space (South Africa)

    Smit, MC

    1995-01-01

    Full Text Available primary plate separation, w G bifilar primary 2EOE,NpW(h + To - T;) d C= where d plate width. Fig. 8. SPICE model of discrete component converter ~ 21 B. Spice Simulation The objective of the simulation is to show that the integrated structure... reacts in the same way as a discrete series inductor capacitor and transformer would do, and in turn agrees with the experimental results. Fig. 8 shows the SPICE circuit model of the discrete component series resonant converter. Inductance L...

  5. New series of 3 D lattice integrable models

    International Nuclear Information System (INIS)

    Mangazeev, V.V.; Sergeev, S.M.; Stroganov, Yu.G.

    1993-01-01

    In this paper we present a new series of 3-dimensional integrable lattice models with N colors. The weight functions of the models satisfy modified tetrahedron equations with N states and give a commuting family of two-layer transfer-matrices. The dependence on the spectral parameters corresponds to the static limit of the modified tetrahedron equations and weights are parameterized in terms of elliptic functions. The models contain two free parameters: elliptic modulus and additional parameter η. 12 refs

  6. Head and Helmet Biodynamics and Tracking Performance in Vibration Environments

    National Research Council Canada - National Science Library

    Smith, Suzanne D; Smith, Jeanne A

    2006-01-01

    ...) and Up (40" elevation, 0" azimuth)], and three helmet CCs were tested. The overall head, helmet, and helmet slippage displacement rotations, and rms tracking error and percent time-on-target were evaluated...

  7. The mystery of the missing Viking helmets.

    Science.gov (United States)

    Wester, K

    2000-11-01

    Based on archaeological finds and old Norse literature, this study describes the Scandinavian helmet tradition from the Bronze Age to the Viking Age, as well as the Viking culture, with special emphasis on weaponry and head protection. Contrary to what is commonly believed, the study shows that metal helmets must have been used very infrequently by the Vikings. In fact, only one Viking helmet has been retrieved in Scandinavia. Possible reasons for the widespread misconception that the Vikings wore helmets are discussed, and the responsibility for not correcting this misunderstanding is placed with the archaeological profession.

  8. One loop integration with hypergeometric series by using recursion relations

    International Nuclear Information System (INIS)

    Watanabe, Norihisa; Kaneko, Toshiaki

    2014-01-01

    General one-loop integrals with arbitrary mass and kinematical parameters in d-dimensional space-time are studied. By using Bernstein theorem, a recursion relation is obtained which connects (n + 1)-point to n-point functions. In solving this recursion relation, we have shown that one-loop integrals are expressed by a newly defined hypergeometric function, which is a special case of Aomoto-Gelfand hypergeometric functions. We have also obtained coefficients of power series expansion around 4-dimensional space-time for two-, three- and four-point functions. The numerical results are compared with ''LoopTools'' for the case of two- and three-point functions as examples

  9. How Satisfied are Soldiers with their Ballistic Helmets? A Comparison of Soldiers' Opinions about the Advanced Combat Helmet and the Personal Armor System for Ground Troops

    National Research Council Canada - National Science Library

    Ivins, Brian J; Schwab, Karen; Crowley, John S; McEntire, B. J; Trumble, Christopher C; Brown, Fred H; Warden, Deborah L

    2008-01-01

    .... These factors affect Soldiers' decisions about helmet use; therefore, rigorous research about Soldiers' real-life experiences with helmets is critical to assessing a helmet's overall protective efficacy...

  10. Generalizing Integrals Involving X [superscript X] and Series Involving N [superscript N

    Science.gov (United States)

    Osler, Thomas J.; Tsay, Jeffrey

    2005-01-01

    In this paper, the authors evaluate the series and integrals presented by P. Glaister. The authors show that this function has the Maclauren series expansion. The authors derive the series from the integral in two ways. The first derivation uses the technique employed by Glaister. The second derivation uses a change in variable in the integral.

  11. What do we know about bicycle helmets?

    NARCIS (Netherlands)

    Bogerd, C.P. Halldin, P. Houtenbos, M. Otte, D. Rossi, R.M. Walker, L. Willinger, R. & Shinar, D.

    2012-01-01

    Cycling is an excellent sustainable alternative to driving for many journeys. But cyclists have fewer safety options than car-users, with a helmet being the main safety device that is available. However, there are indications that increasing bicycle helmet usage through legislation causes

  12. The Integrated Tiger Series version 5.0

    International Nuclear Information System (INIS)

    Laub, Th.W.; Kensek, R.P.; Franke, B.C.; Lorence, L.J.; Crawford, M.J.; Quirk, Th.J.

    2005-01-01

    The Integrated Tiger Series (ITS) is a powerful and user-friendly software package permitting Monte Carlo solution of linear time-independent coupled electron/photon radiation transport problems, with or without the presence of macroscopic electric and magnetic fields of arbitrary spatial dependence. The package contains programs to perform 1-, 2-, and 3-dimensional simulations. Improvements in the ITS code package since the release of version 3.0 include improved physics, multigroup and adjoint capabilities, Computer-Aided Design geometry tracking, parallel implementations of all ITS codes, and more automated sub-zoning capabilities. These improvements and others are described as current or planned development efforts. The ITS package is currently at version 5.0. (authors)

  13. Asymptotic series and functional integrals in quantum field theory

    International Nuclear Information System (INIS)

    Shirkov, D.V.

    1979-01-01

    Investigations of the methods for analyzing ultra-violet and infrared asymptotics in the quantum field theory (QFT) have been reviewed. A powerful method of the QFT analysis connected with the group property of renormalized transformations has been created at the first stage. The result of the studies of the second period is the constructive solution of the problem of outgoing the framework of weak coupling. At the third stage of studies essential are the asymptotic series and functional integrals in the QFT, which are used for obtaining the asymptotic type of the power expansion coefficients in the coupling constant at high values of the exponents for a number of simple models. Further advance to higher values of the coupling constant requires surmounting the difficulties resulting from the asymptotic character of expansions and a constructive application in the region of strong coupling (g >> 1)

  14. 77 FR 48105 - Federal Motor Vehicle Safety Standards; Motorcycle Helmets

    Science.gov (United States)

    2012-08-13

    ... [Docket No. NHTSA-2012-0112] Federal Motor Vehicle Safety Standards; Motorcycle Helmets AGENCY: National... Vehicle Safety Standard for motorcycle helmets. Specifically, the final rule amended the helmet labeling... compliance test procedures of FMVSS No. 218, Motorcycle helmets, in order to make it more difficult to...

  15. Motorcycle helmets in Vietnam: ownership, quality, purchase price, and affordability.

    Science.gov (United States)

    Hung, Dang Viet; Stevenson, Mark R; Ivers, Rebecca Q

    2008-06-01

    This study investigated motorcycle helmet ownership, quality, purchase price, and affordability in Vietnam. A random sample of motorcyclists was interviewed to investigate aspects of helmet ownership, the purchase price, and affordability of a motorcycle helmet. Multivariate modeling conducted to determine factors associated with the purchase price and affordability of motorcycle helmets. Helmet quality was assessed based on current legal requirements in Vietnam. The prevalence of helmet use in Vietnam remains low (23.3%) despite a high level of helmet ownership (94%), indicating that this is an important area for public health intervention. Overall the quality of helmets appeared to be good; however, few helmets displayed legally required information. Motorcyclists with a high income purchase more helmets for their household rather than more expensive helmets. To ensure that helmets are accessible to the community, policy-makers need to consider pricing motorcycle helmets at a price indicated by the results of this study. Prior to universal motorcycle helmet legislation, the government will also need to ensure that standard helmets are available and that enforcement is at a level to ensure that motorcycle helmets are actually used.

  16. Helmet-based physiological signal monitoring system.

    Science.gov (United States)

    Kim, Youn Sung; Baek, Hyun Jae; Kim, Jung Soo; Lee, Haet Bit; Choi, Jong Min; Park, Kwang Suk

    2009-02-01

    A helmet-based system that was able to monitor the drowsiness of a soldier was developed. The helmet system monitored the electrocardiogram, electrooculogram and electroencephalogram (alpha waves) without constraints. Six dry electrodes were mounted at five locations on the helmet: both temporal sides, forehead region and upper and lower jaw strips. The electrodes were connected to an amplifier that transferred signals to a laptop computer via Bluetooth wireless communication. The system was validated by comparing the signal quality with conventional recording methods. Data were acquired from three healthy male volunteers for 12 min twice a day whilst they were sitting in a chair wearing the sensor-installed helmet. Experimental results showed that physiological signals for the helmet user were measured with acceptable quality without any intrusions on physical activities. The helmet system discriminated between the alert and drowsiness states by detecting blinking and heart rate variability (HRV) parameters extracted from ECG. Blinking duration and eye reopening time were increased during the sleepiness state compared to the alert state. Also, positive peak values of the sleepiness state were much higher, and the negative peaks were much lower than that of the alert state. The LF/HF ratio also decreased during drowsiness. This study shows the feasibility for using this helmet system: the subjects' health status and mental states could be monitored without constraints whilst they were working.

  17. Children and cycle helmets -- the case against.

    Science.gov (United States)

    McCarthy, M

    1996-03-01

    Much of the literature on child cycling accidents appears to blame the child as a victim, as though children's activities of playing and travelling were somehow wrong and that children are at fault when an adult drives a car over them. This adult-centred approach then leads to the idea that children should protect themselves with helmets, and that they are to blame if they are injured. However, adults who continue to hold the fantasy that helmets might be of value should know that the British Standard for cycle helmets protects only in a vertical fall of 1 m -- certainly not motor vehicle crashes. Thicker motor cycle helmets would give better protection but, of course, are heavier (and therefore unsaleable). Yet even with compulsory wearing helmets, more motor cyclists still die of head injuries than pedal cyclists. In the Newcastle study, five times as many child pedestrians died of road accidents as child cyclists. Convinced helmeteers should recommend all children playing or travelling in the streets to wear helmets (presumably heavy motor-cycle helmets). Slightly more sceptical proponents might prefer half of them -- in a randomized controlled trial. Car driving appears to have as serious health consequences as tobacco, alcohol and drugs, and to be as addictive (McCarthy 1992). Helmets are similar to filters in cigarettes -- they give the illusion of safety to both consumer and producer of the product, but the illusion is fatal. Yet, for their cardiovascular and mental health, children should have the freedom to cycle in safety around where they live. A profound change in the habits of adults is needed, rather than suits of armour for children.

  18. Helmet Sensor - Transfer Function and Model Development

    Science.gov (United States)

    2010-09-01

    that helmets be examined forensically when estimating the impact direction and location and the electronic HMSS data not be used in that determination... forensic analysis of the helmet itself is therefore recommended to determine the direction and severity of the ballistic impact 5. The helmet shell does...ot83 HTI l ot 8J HT1 lot S ,HTt IOt S , HTI l otiH HTt lotSS HTt l vt85 HTI l o)t 85 HT1 Front Level Acceleration ~~,--~----~--,30’p~g

  19. Combined Helmholtz Integral Equation - Fourier series formulation of acoustical radiation and scattering problems

    CSIR Research Space (South Africa)

    Fedotov, I

    2006-07-01

    Full Text Available The Combined Helmholtz Integral Equation – Fourier series Formulation (CHIEFF) is based on representation of a velocity potential in terms of Fourier series and finding the Fourier coefficients of this expansion. The solution could be substantially...

  20. Motorcycle helmets: What about their coating?

    Science.gov (United States)

    Schnegg, Michaël; Massonnet, Geneviève; Gueissaz, Line

    2015-07-01

    In traffic accidents involving motorcycles, paint traces can be transferred from the rider's helmet or smeared onto its surface. These traces are usually in the form of chips or smears and are frequently collected for comparison purposes. This research investigates the physical and chemical characteristics of the coatings found on motorcycles helmets. An evaluation of the similarities between helmet and automotive coating systems was also performed.Twenty-seven helmet coatings from 15 different brands and 22 models were considered. One sample per helmet was collected and observed using optical microscopy. FTIR spectroscopy was then used and seven replicate measurements per layer were carried out to study the variability of each coating system (intravariability). Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) were also performed on the infrared spectra of the clearcoats and basecoats of the data set. The most common systems were composed of two or three layers, consistently involving a clearcoat and basecoat. The coating systems of helmets with composite shells systematically contained a minimum of three layers. FTIR spectroscopy results showed that acrylic urethane and alkyd urethane were the most frequent binders used for clearcoats and basecoats. A high proportion of the coatings were differentiated (more than 95%) based on microscopic examinations. The chemical and physical characteristics of the coatings allowed the differentiation of all but one pair of helmets of the same brand, model and color. Chemometrics (PCA and HCA) corroborated classification based on visual comparisons of the spectra and allowed the study of the whole data set at once (i.e., all spectra of the same layer). Thus, the intravariability of each helmet and its proximity to the others (intervariability) could be more readily assessed. It was also possible to determine the most discriminative chemical variables based on the study of the PCA loadings. Chemometrics

  1. Federally mandating motorcycle helmets in the United States.

    Science.gov (United States)

    Eltorai, Adam E M; Simon, Chad; Choi, Ariel; Hsia, Katie; Born, Christopher T; Daniels, Alan H

    2016-03-09

    Motorcycle helmets reduce both motorcycle-related fatalities and head injuries. Motorcycle crashes are a major public health concern which place economic stress on the U.S. healthcare system. Although statewide universal motorcycle helmet laws effectively increase helmet use, most state helmet laws do not require every motorcycle rider to wear a helmet. Herein, we propose and outline the solution of implementing federal motorcycle helmet law, while addressing potential counterarguments. The decision to ride a motorcycle without a helmet has consequences that affect more than just the motorcyclist. In an effort to prevent unnecessary healthcare costs, injuries, and deaths, public health efforts to increase helmet use through education and legislation should be strongly considered. Helmet use on motorcycles fits squarely within the purview of the federal government public health and economic considerations.

  2. The motivational safety helmet : Redesign suggestions improving the intrinsic motivation of construction site workers

    NARCIS (Netherlands)

    Beldman, T. (Teunis); Boer, de J. (Johannes); Lemmens, P. (Pim); Stilma, M. (Margot)

    2014-01-01

    In reaction to the lack of intrinsic motivation of construction site workers, to wear their safety helmets at all times, a series of research projects studied causes and possible solutions. Goal is to gain an inspirational discussion to get the design onto the next level. This paper describes a

  3. Application of Auxetic Foam in Sports Helmets

    Directory of Open Access Journals (Sweden)

    Leon Foster

    2018-03-01

    Full Text Available This investigation explored the viability of using open cell polyurethane auxetic foams to augment the conformable layer in a sports helmet and improve its linear impact acceleration attenuation. Foam types were compared by examining the impact severity on an instrumented anthropomorphic headform within a helmet consisting of three layers: a rigid shell, a stiff closed cell foam, and an open cell foam as a conformable layer. Auxetic and conventional foams were interchanged to act as the helmet’s conformable component. Attenuation of linear acceleration was examined by dropping the combined helmet and headform on the front and the side. The helmet with auxetic foam reduced peak linear accelerations (p < 0.05 relative to its conventional counterpart at the highest impact energy in both orientations. Gadd Severity Index reduced by 11% for frontal impacts (38.9 J and 44% for side impacts (24.3 J. The conformable layer within a helmet can influence the overall impact attenuating properties. The helmet fitted with auxetic foam can attenuate impact severity more than when fitted with conventional foam, and warrants further investigation for its potential to reduce the risk of traumatic brain injuries in sport specific impacts.

  4. High Speed Solution of Spacecraft Trajectory Problems Using Taylor Series Integration

    Science.gov (United States)

    Scott, James R.; Martini, Michael C.

    2008-01-01

    Taylor series integration is implemented in a spacecraft trajectory analysis code-the Spacecraft N-body Analysis Program (SNAP) - and compared with the code s existing eighth-order Runge-Kutta Fehlberg time integration scheme. Nine trajectory problems, including near Earth, lunar, Mars and Europa missions, are analyzed. Head-to-head comparison at five different error tolerances shows that, on average, Taylor series is faster than Runge-Kutta Fehlberg by a factor of 15.8. Results further show that Taylor series has superior convergence properties. Taylor series integration proves that it can provide rapid, highly accurate solutions to spacecraft trajectory problems.

  5. Further Generalized Integrals Involving x[superscript x] and Series Involving N[superscript N

    Science.gov (United States)

    Glaister, P.

    2005-01-01

    In this paper, the author gives a further simple generalization of a power series evaluation of an integral using Taylor series to derive the result. The author encourages readers to consider numerical methods to evaluate the integrals and sums. Such methods are suitable for use in courses in advanced calculus and numerical analysis.

  6. Simulation-based assessment for construction helmets.

    Science.gov (United States)

    Long, James; Yang, James; Lei, Zhipeng; Liang, Daan

    2015-01-01

    In recent years, there has been a concerted effort for greater job safety in all industries. Personnel protective equipment (PPE) has been developed to help mitigate the risk of injury to humans that might be exposed to hazardous situations. The human head is the most vulnerable to impact as a moderate magnitude can cause serious injury or death. That is why industries have required the use of an industrial hard hat or helmet. There have only been a few articles published to date that are focused on the risk of head injury when wearing an industrial helmet. A full understanding of the effectiveness of construction helmets on reducing injury is lacking. This paper presents a simulation-based method to determine the threshold at which a human will sustain injury when wearing a construction helmet and assesses the risk of injury for wearers of construction helmets or hard hats. Advanced finite element, or FE, models were developed to study the impact on construction helmets. The FE model consists of two parts: the helmet and the human models. The human model consists of a brain, enclosed by a skull and an outer layer of skin. The level and probability of injury to the head was determined using both the head injury criterion (HIC) and tolerance limits set by Deck and Willinger. The HIC has been widely used to assess the likelihood of head injury in vehicles. The tolerance levels proposed by Deck and Willinger are more suited for finite element models but lack wide-scale validation. Different cases of impact were studied using LSTC's LS-DYNA.

  7. Passengers' attitudes and behaviour towards motorcycle helmet use ...

    African Journals Online (AJOL)

    Passengers' attitudes and behaviour towards motorcycle helmet use in Ilorin, ... Remember me ... The purpose of this study was to examine the attitudes, knowledge, and behavior of motorcycle passengers to helmet use in Ilorin metropolis, ...

  8. Helmet use and associated factors among motorcyclists in the ...

    African Journals Online (AJOL)

    opperwjj

    in Malaysia and the highest (10) in Brunei Duressalam. Stricter .... in line with the global findings that the introduction and enforcement of legislation on helmet .... Motorcycle helmet wearing behavior among Naresuan university students.

  9. Neck Muscle Fatigue Resulting from Prolonged Wear of Weighted Helmets

    National Research Council Canada - National Science Library

    Gallagher, Hilary L; Caldwell, Erin; ALbery, Christopher B

    2008-01-01

    .... While these systems undoubtedly increase a pilot's capabilities, one obvious drawback to putting all this equipment on the pilot's helmet is the increase in helmet weight that shifts the combined...

  10. Management Ethics: Integrity at Work. Sage Series on Business Ethics.

    Science.gov (United States)

    Petrick, Joseph A.; Quinn, John F.

    This book tries to redefine what it means for a manager to function with integrity and competence in the private and public sectors domestically and globally. It integrates theoretical work in both descriptive and normative ethics and incorporates legal, communication, quality, and organizational theories into a conceptual framework designed to…

  11. An integral time series on simulated labeling using fractal structure

    International Nuclear Information System (INIS)

    Djainal, D.D.

    1997-01-01

    This research deals with the detection of time series of vertical two-phase flow, in attempt to developed an objective indicator of time series flow patterns. One of new method is fractal analysis which can complement conventional methods in the description of highly irregular fluctuations. in the present work, fractal analysis applied to analyze simulated boiling coolant signal. this simulated signals built by sum random elements in small subchannels of the coolant channel. Two modes are defined and both modes are characterized by their void fractions. in the case of unimodal-PDF signals, the difference between these modes is relative small. on other hand, bimodal-PDF signals have relative large range. in this research, fractal dimension can indicate the characters of that signals simulation

  12. Helmets or not? Use science correctly.

    Science.gov (United States)

    Trégouët, Paul

    2015-08-01

    In a recent article, Hooper and Spicer make several arguments against legislation that would mandate the use of bicycle helmets. While they present reasonable objections to the utilitarian as well as the justice defence of such legislation, their review of the empirical evidence contains inaccuracies, omissions and a bias in the selection of empirical data. While there are legitimate reasons to argue against mandating helmet legislation, these arguments should still be based on clinically and scientifically sound evidence. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  13. Time series analysis of the developed financial markets' integration using visibility graphs

    Science.gov (United States)

    Zhuang, Enyu; Small, Michael; Feng, Gang

    2014-09-01

    A time series representing the developed financial markets' segmentation from 1973 to 2012 is studied. The time series reveals an obvious market integration trend. To further uncover the features of this time series, we divide it into seven windows and generate seven visibility graphs. The measuring capabilities of the visibility graphs provide means to quantitatively analyze the original time series. It is found that the important historical incidents that influenced market integration coincide with variations in the measured graphical node degree. Through the measure of neighborhood span, the frequencies of the historical incidents are disclosed. Moreover, it is also found that large "cycles" and significant noise in the time series are linked to large and small communities in the generated visibility graphs. For large cycles, how historical incidents significantly affected market integration is distinguished by density and compactness of the corresponding communities.

  14. Series-connected substrate-integrated lead-carbon hybrid ...

    Indian Academy of Sciences (India)

    Voltage-management circuit for the ultracapacitor is presented, and its effectiveness is validated ... and V2 = 1.84 V. Clearly, ultracapacitor C1 is operating ... affect the reliability of the overall system. ... 3.1 Performance data for substrate-integrated lead-carbon .... Financial support from Department of Science & Technol-.

  15. Observation of motorcycle helmet use rates in Michigan after partial repeal of the universal motorcycle helmet law.

    Science.gov (United States)

    Buckley, Lisa; Bingham, C Raymond; Flannagan, Carol A; Carter, Patrick M; Almani, Farideh; Cicchino, Jessica B

    2016-10-01

    Motorcycle crashes result in a significant health burden, including many fatal injuries and serious non-fatal head injuries. Helmets are highly effective in preventing such trauma, and jurisdictions that require helmet use of all motorcyclists have higher rates of helmet use and lower rates of head injuries among motorcyclists. The current study examines helmet use and characteristics of helmeted operators and their riding conditions in Michigan, following a weakening of the state's universal motorcycle helmet use law in April 2012. Data on police-reported crashes occurring during 2012-14 and from a stratified roadside observational survey undertaken in Southeast Michigan during May-September 2014 were used to estimate statewide helmet use rates. Observed helmet use was more common among operators of sports motorcycles, on freeways, and in the morning, and least common among operators of cruisers, on minor arterials, and in the afternoon. The rate of helmet use across the state was estimated at 75%, adjusted for roadway type, motorcycle class, and time of day. Similarly, the helmet use rate found from examination of crash records was 73%. In the observation survey, 47% of operators wore jackets, 94% wore long pants, 54% wore boots, and 80% wore gloves. Protective clothing of jackets and gloves was most often worn by sport motorcycle operators and long pants and boots most often by riders of touring motorcycles. Findings highlight the much lower rate of helmet use in Michigan compared with states that have a universal helmet use law, although the rate is higher than observed in many states with partial helmet laws. Targeted interventions aimed at specific groups of motorcyclists and situations where helmet use rates are particularly low should be considered to increase helmet use. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Effects of repealing the motorcycle helmet law in Michigan.

    Science.gov (United States)

    Hothem, Zachary; Simon, Robert; Barnes, Wesley; Mohammad, Azmath; Sevak, Shruti; Ziegler, Kathryn; Iacco, Anthony; Janczyk, Randy

    2017-09-01

    In 2012, Michigan repealed its universal helmet law. Our study assessed the clinical impact of this repeal. Our trauma database was queried retrospectively for 2 motorcycle riding seasons before and 3 seasons after repeal. On-scene death data was obtained from the Medical Examiner. Helmet use in hospitalized patients decreased after the helmet law repeal. Non-helmeted patients had a significant increased rate of head injury. Non-helmeted patients were more likely to die during hospitalization. While, helmet use and drugs/alcohol status significantly affected the risk for head injury, only drug/alcohol had a significant effect on overall mortality. Following helmet law repeal, helmet use has decreased. Helmet status and drug/alcohol use was found to significantly increase risk of head injury. Although overall mortality was only affected by drug/alcohol use, non-helmeted patients did have a higher inpatient mortality. These findings deserve furthermore study and may provide a basis for reinstating the universal helmet law. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. On a new series of integrable nonlinear evolution equations

    International Nuclear Information System (INIS)

    Ichikawa, Y.H.; Wadati, Miki; Konno, Kimiaki; Shimizu, Tohru.

    1980-10-01

    Recent results of our research are surveyed in this report. The derivative nonlinear Schroedinger equation for the circular polarized Alfven wave admits the spiky soliton solutions for the plane wave boundary condition. The nonlinear equation for complex amplitude associated with the carrier wave is shown to be a generalized nonlinear Schroedinger equation, having the ordinary cubic nonlinear term and the derivative of cubic nonlinear term. A generalized scheme of the inverse scattering transformation has confirmed that superposition of the A-K-N-S scheme and the K-N scheme for the component equations valids for the generalized nonlinear Schroedinger equation. Then, two types of new integrable nonlinear evolution equation have been derived from our scheme of the inverse scattering transformation. One is the type of nonlinear Schroedinger equation, while the other is the type of Korteweg-de Vries equation. Brief discussions are presented for physical phenomena, which could be accounted by the second type of the new integrable nonlinear evolution equation. Lastly, the stationary solitary wave solutions have been constructed for the integrable nonlinear evolution equation of the second type. These solutions have peculiar structure that they are singular and discrete. It is a new challenge to construct singular potentials by the inverse scattering transformation. (author)

  18. New Recursive Representations for the Favard Constants with Application to Multiple Singular Integrals and Summation of Series

    Directory of Open Access Journals (Sweden)

    Snezhana Georgieva Gocheva-Ilieva

    2013-01-01

    Full Text Available There are obtained integral form and recurrence representations for some Fourier series and connected with them Favard constants. The method is based on preliminary integration of Fourier series which permits to establish general recursion formulas for Favard constants. This gives the opportunity for effective summation of infinite series and calculation of some classes of multiple singular integrals by the Favard constants.

  19. A study of emergency American football helmet removal techniques.

    Science.gov (United States)

    Swartz, Erik E; Mihalik, Jason P; Decoster, Laura C; Hernandez, Adam E

    2012-09-01

    The purpose was to compare head kinematics between the Eject Helmet Removal System and manual football helmet removal. This quasi-experimental study was conducted in a controlled laboratory setting. Thirty-two certified athletic trainers (sex, 19 male and 13 female; age, 33 ± 10 years; height, 175 ± 12 cm; mass, 86 ± 20 kg) removed a football helmet from a healthy model under 2 conditions: manual helmet removal and Eject system helmet removal. A 6-camera motion capture system recorded 3-dimensional head position. Our outcome measures consisted of the average angular velocity and acceleration of the head in each movement plane (sagittal, frontal, and transverse), the resultant angular velocity and acceleration, and total motion. Paired-samples t tests compared each variable across the 2 techniques. Manual helmet removal elicited greater average angular velocity in the sagittal and transverse planes and greater resultant angular velocity compared with the Eject system. No differences were observed in average angular acceleration in any single plane of movement; however, the resultant angular acceleration was greater during manual helmet removal. The Eject Helmet Removal System induced greater total head motion. Although the Eject system created more motion at the head, removing a helmet manually resulted in more sudden perturbations as identified by resultant velocity and acceleration of the head. The implications of these findings relate to the care of all cervical spine-injured patients in emergency medical settings, particularly in scenarios where helmet removal is necessary. Copyright © 2012 Elsevier Inc. All rights reserved.

  20. Integrated Test and Evaluation (ITE) Flight Test Series 4

    Science.gov (United States)

    Marston, Michael

    2016-01-01

    The integrated Flight Test 4 (FT4) will gather data for the UAS researchers Sense and Avoid systems (referred to as Detect and Avoid in the RTCA SC 228 ToR) algorithms and pilot displays for candidate UAS systems in a relevant environment. The technical goals of FT4 are to: 1) perform end-to-end traffic encounter test of pilot guidance generated by DAA algorithms; 2) collect data to inform the initial Minimum Operational Performance Standards (MOPS) for Detect and Avoid systems. FT4 objectives and test infrastructure builds from previous UAS project simulations and flight tests. NASA Ames (ARC), NASA Armstrong (AFRC), and NASA Langley (LaRC) Research Centers will share responsibility for conducting the tests, each providing a test lab and critical functionality. UAS-NAS project support and participation on the 2014 flight test of ACAS Xu and DAA Self Separation (SS) significantly contributed to building up infrastructure and procedures for FT3 as well. The DAA Scripted flight test (FT4) will be conducted out of NASA Armstrong over an eight-week period beginning in April 2016.

  1. The integration of improved Monte Carlo compton scattering algorithms into the Integrated TIGER Series

    International Nuclear Information System (INIS)

    Quirk, Thomas J. IV

    2004-01-01

    The Integrated TIGER Series (ITS) is a software package that solves coupled electron-photon transport problems. ITS performs analog photon tracking for energies between 1 keV and 1 GeV. Unlike its deterministic counterpart, the Monte Carlo calculations of ITS do not require a memory-intensive meshing of phase space; however, its solutions carry statistical variations. Reducing these variations is heavily dependent on runtime. Monte Carlo simulations must therefore be both physically accurate and computationally efficient. Compton scattering is the dominant photon interaction above 100 keV and below 5-10 MeV, with higher cutoffs occurring in lighter atoms. In its current model of Compton scattering, ITS corrects the differential Klein-Nishina cross sections (which assumes a stationary, free electron) with the incoherent scattering function, a function dependent on both the momentum transfer and the atomic number of the scattering medium. While this technique accounts for binding effects on the scattering angle, it excludes the Doppler broadening the Compton line undergoes because of the momentum distribution in each bound state. To correct for these effects, Ribbefor's relativistic impulse approximation (IA) will be employed to create scattering cross section differential in both energy and angle for each element. Using the parameterizations suggested by Brusa et al., scattered photon energies and angle can be accurately sampled at a high efficiency with minimal physical data. Two-body kinematics then dictates the electron's scattered direction and energy. Finally, the atomic ionization is relaxed via Auger emission or fluorescence. Future work will extend these improvements in incoherent scattering to compounds and to adjoint calculations.

  2. Noise-Canceling Helmet Audio System

    Science.gov (United States)

    Seibert, Marc A.; Culotta, Anthony J.

    2007-01-01

    A prototype helmet audio system has been developed to improve voice communication for the wearer in a noisy environment. The system was originally intended to be used in a space suit, wherein noise generated by airflow of the spacesuit life-support system can make it difficult for remote listeners to understand the astronaut s speech and can interfere with the astronaut s attempt to issue vocal commands to a voice-controlled robot. The system could be adapted to terrestrial use in helmets of protective suits that are typically worn in noisy settings: examples include biohazard, fire, rescue, and diving suits. The system (see figure) includes an array of microphones and small loudspeakers mounted at fixed positions in a helmet, amplifiers and signal-routing circuitry, and a commercial digital signal processor (DSP). Notwithstanding the fixed positions of the microphones and loudspeakers, the system can accommodate itself to any normal motion of the wearer s head within the helmet. The system operates in conjunction with a radio transceiver. An audio signal arriving via the transceiver intended to be heard by the wearer is adjusted in volume and otherwise conditioned and sent to the loudspeakers. The wearer s speech is collected by the microphones, the outputs of which are logically combined (phased) so as to form a microphone- array directional sensitivity pattern that discriminates in favor of sounds coming from vicinity of the wearer s mouth and against sounds coming from elsewhere. In the DSP, digitized samples of the microphone outputs are processed to filter out airflow noise and to eliminate feedback from the loudspeakers to the microphones. The resulting conditioned version of the wearer s speech signal is sent to the transceiver.

  3. Helmet Use and Head Injury in Homer's Iliad.

    Science.gov (United States)

    Swinney, Christian

    2016-06-01

    Homer's detailed descriptions of head injuries inflicted during the Trojan War are of particular interest to individuals in the medical community. Although studies have examined the prevalence of such injuries, none have examined the preventive measures taken to avoid them. An in-depth review of helmet use in Homer's Iliad was conducted to address this previously unexplored facet of the epic. An English translation of Homer's text was reviewed for all references to helmet use. The number of helmet references in each book was recorded, along with other pertinent details for each reference. There were 87 references to helmets (40 combat, 47 noncombat). The helmet belonged to a Greek warrior in 41 cases (47.1%), a Trojan warrior in 38 cases (43.6%), a divinity in 5 cases (5.7%), and a general group of warriors in 3 cases (3.4%). Helmet use provided protective benefit to Greek warriors at a rate of 30.0% (3 of 10) and Trojan warriors at a rate of 11.1% (2 of 18). This difference was not statistically significant (P = 0.23). The overall combined protective benefit of helmet use in the text was 17.9% (5 of 28). Helmets belonging to 15 specific Greek warriors and 18 specific Trojan warriors were referenced in the text. Helmets belonging to Hector (n = 12) and Achilles (n = 8) were most frequently mentioned. Helmet use and head injury both play a prominent role in Homer's Iliad. Helmets are frequently used in combat settings but with relatively little success. Helmets are also used in various noncombat settings. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Operational Overview for UAS Integration in the NAS Project Flight Test Series 3

    Science.gov (United States)

    Valkov, Steffi B.; Sternberg, Daniel; Marston, Michael

    2018-01-01

    The National Aeronautics and Space Administration Unmanned Aircraft Systems Integration in the National Airspace System Project has conducted a series of flight tests intended to support the reduction of barriers that prevent unmanned aircraft from flying without the required waivers from the Federal Aviation Administration. The 2015 Flight Test Series 3, supported two separate test configurations. The first configuration investigated the timing of Detect and Avoid alerting thresholds using a radar equipped unmanned vehicle and multiple live intruders flown at varying encounter geometries.

  5. SAFETY ALERT: Electrical insulation defect on safety helmets

    CERN Multimedia

    HSE Unit

    2013-01-01

    Contrarily to the information provided until 31 May 2013, some “Euro Protection” safety helmets do not respect any of the requirements for electrical insulation.   This alert concerns the safety helmets identified under the following SCEM numbers: 50.43.30.050.4 white 50.43.30.060.2 yellow 50.43.30.070.0 blue This amounts up to several hundreds of helmets on the CERN site. People who need to wear an electrically insulated safety helmet for their activities, must from now on acquire a duly insulated item to be found on the CERN store under the following SCEM numbers: 50.43.30.210.6: Petzl Vertex ST Helmet (without vent) 50.43.30.300.1: IDRA Helmet with a visor for electrical work As for the people who do not need to wear an electrically insulated helmet for their activities, they can continue working with the aforementioned helmets. For your information, please take note of the maximum use limit of each helmet: “Euro Protection” Safety Helme...

  6. Integrable deformations and scattering matrices for the N=2 supersymmetric discrete series

    International Nuclear Information System (INIS)

    Fendley, P.; Mathur, S.D.; Vafa, C.; Warner, N.P.

    1990-01-01

    We find integrable deformations of the N=2 supersymmetric minimal series of conformal models by discovering supermultiplets of conserved currents in the perturbed theories. Integrability for these models is closely related to the geometric structure of the perturbed superpotentials. The exact soliton spectrum can be read off from the superpotential and this is then used to determine the purely elastic scattering matrices for the perturbed massive theories. (orig.)

  7. The ATOMFT integrator - Using Taylor series to solve ordinary differential equations

    Science.gov (United States)

    Berryman, Kenneth W.; Stanford, Richard H.; Breckheimer, Peter J.

    1988-01-01

    This paper discusses the application of ATOMFT, an integration package based on Taylor series solution with a sophisticated user interface. ATOMFT has the capabilities to allow the implementation of user defined functions and the solution of stiff and algebraic equations. Detailed examples, including the solutions to several astrodynamics problems, are presented. Comparisons with its predecessor ATOMCC and other modern integrators indicate that ATOMFT is a fast, accurate, and easy method to use to solve many differential equation problems.

  8. Helmet wearing in Kenya: prevalence, knowledge, attitude, practice and implications.

    Science.gov (United States)

    Bachani, A M; Hung, Y W; Mogere, S; Akunga, D; Nyamari, J; Hyder, A A

    2017-03-01

    In light of the increasing prevalence of motorcycles on Kenyan roads, there is a need to address the safety of individuals using this mode of transport. Helmet use has been proven to be effective in preventing head injuries and fatalities in the event of a crash. This study aims to understand the prevalence of helmet use as well as knowledge, attitudes, and practices in two districts in Kenya over a 5-year period (2010-2014). Observational studies on helmet use at randomly selected locations throughout each district were done every quarter to estimate the prevalence of helmet use. Roadside knowledge, attitude, and practice (KAP) surveys were done two times a year in each district. Helmet use among motorcycle drivers and passengers in Thika and Naivasha was assessed through systematic observations at randomly selected locations in the two districts between August 2010 and December 2014. Roadside KAP surveys were administered in both sites to motorcyclists in areas where they stopped, including motorcycle bays, petrol stations and rest areas near the helmet observation sites. Secondary analysis of trauma registries was also used. Negative binomial regressions were used to assess trends of helmet wearing among motorcyclists over time, and logistic regressions were used to analyze associated risk factors as well as association with health outcomes among those admitted to the four hospitals. A total of 256,851 motorcycles were observed in the two target districts during the study period. Overall, prevalence of helmet use among motorcycle drivers in Thika and Naivasha across all periods was 35.12% (95% confidence interval [CI]: 34.87%-35.38%) and 37.42% (95% CI: 37.15%-37.69%) respectively. Prevalence of helmet wearing remained similar after the passage of a traffic amendment bill. These results were not statistically significant in either Thika or in Naivasha. Data from the KAP survey showed that respondents recognized the life-saving effect of wearing a helmet, but

  9. Feasibility of real-time calculation of correlation integral derived statistics applied to EGG time series

    NARCIS (Netherlands)

    van den Broek, PLC; van Egmond, J; van Rijn, CM; Takens, F; Coenen, AML; Booij, LHDJ

    2005-01-01

    Background: This study assessed the feasibility of online calculation of the correlation integral (C(r)) aiming to apply C(r)derived statistics. For real-time application it is important to reduce calculation time. It is shown how our method works for EEG time series. Methods: To achieve online

  10. Feasibility of real-time calculation of correlation integral derived statistics applied to EEG time series

    NARCIS (Netherlands)

    Broek, P.L.C. van den; Egmond, J. van; Rijn, C.M. van; Takens, F.; Coenen, A.M.L.; Booij, L.H.D.J.

    2005-01-01

    This study assessed the feasibility of online calculation of the correlation integral (C(r)) aiming to apply C(r)-derived statistics. For real-time application it is important to reduce calculation time. It is shown how our method works for EEG time series. Methods: To achieve online calculation of

  11. The principal series for a reductive symmetric space, II. Eisenstein integrals.

    NARCIS (Netherlands)

    Ban, E.P. van den

    1991-01-01

    In this paper we develop a theory of Eisenstein integrals related to the principal series for a reductive symmetric space G=H: Here G is a real reductive group of Harish-Chandra's class, ? an involution of G and H an open subgroup of the group G ? of xed points for ?: The group G itself is a

  12. Power Series Expansion of Propagator for Path Integral and Its Applications

    International Nuclear Information System (INIS)

    Ou Yuanjin; Liang Xianting

    2007-01-01

    In this paper we obtain a propagator of path integral for a harmonic oscillator and a driven harmonic oscillator by using the power series expansion. It is shown that our result for the harmonic oscillator is more exact than the previous one obtained with other approximation methods. By using the same method, we obtain a propagator of path integral for the driven harmonic oscillator, which does not have any exact expansion. The more exact propagators may improve the path integral results for these systems.

  13. How motorcycle helmets affect trauma mortality: Clinical and policy implications.

    Science.gov (United States)

    Lee, Jwo-Leun; Chen, Tzu-Chun; Huang, Hung-Chang; Chen, Ray-Jade

    2017-08-18

    Motorcycles are the most popular vehicles in Taiwan, where more than 14.8 million motorcycles (1 motorcycle per 1.6 people) are in service. Despite the mandatory helmet law passed in 1997, less than 80% of motorcyclists in Taiwan wear helmets. The objective of this study was to analyze the effect of using motorcycle helmets on fatality rates. A clinical data set including 2,868 trauma patients was analyzed; the cross-sectional registration database was administered by a university medical center in Central Taiwan. A path analysis framework and multiple logistic regressions were used to estimate the marginal effect of helmet use on mortality. Using a helmet did not directly reduce the mortality rate but rather indirectly reduced the mortality rate through intervening variables such as the severity of head injuries, number of craniotomies, and complications during therapeutic processes. Wearing a helmet can reduce the fatality rate by 1.3%, the rate of severe head injury by 34.5%, the craniotomy rate by 7.8%, and the rate of complications during therapeutic processes by 1.5%. These rates comprise 33.3% of the mortality rate for people who do not wear helmets, 67.3% of the severe head injury rate, 60.0% of the craniotomy rate, and 12.2% of the rate of complications during therapeutic processes. Wearing a helmet and trauma system designation are crucial factors that reduce the fatality rate.

  14. Finite element modelling of helmeted head impact under frontal ...

    Indian Academy of Sciences (India)

    helmets in direct impact are well documented and helmets have been found to ... conditions during a drop test and studied the influence of shell stiffness and liner ... the latter authors use a SI (Structural Intensity) approach to study power flow ...

  15. Long Series of GNSS Integrated Precipitable Water as a Climate Change Indicator

    Directory of Open Access Journals (Sweden)

    Kruczyk Michał

    2015-12-01

    Full Text Available This paper investigates information potential contained in tropospheric delay product for selected International GNSS Service (IGS stations in climatologic research. Long time series of daily averaged Integrated Precipitable Water (IPW can serve as climate indicator. The seasonal model of IPW change has been adjusted to the multi-year series (by the least square method. Author applied two modes: sinusoidal and composite (two or more oscillations. Even simple sinusoidal seasonal model (of daily IPW values series clearly represents diversity of world climates. Residuals in periods from 10 up to 17 years are searched for some long-term IPW trend – self-evident climate change indicator. Results are ambiguous: for some stations or periods IPW trends are quite clear, the following years (or the other station not visible. Method of fitting linear trend to IPW series does not influence considerably the value of linear trend. The results are mostly influenced by series length, completeness and data (e.g. meteorological quality. The longer and more homogenous IPW series, the better chance to estimate the magnitude of climatologic IPW changes.

  16. Helmet Ownership and Use among Skateboarders: Utilisation of the Health Belief Model

    Science.gov (United States)

    Peachey, Andrew A.; Sutton, Debra L.; Cathorall, Michelle L.

    2016-01-01

    Introduction: The purpose of this study was to determine the proportion of skateboarders who owned and who wore a helmet and which constructs from the Health Belief Model predicted helmet ownership and helmet use among undergraduate skateboarders. Methods: From March 2013 through March 2014, 83 skateboarders completed a helmet attitude and use…

  17. SYMPATHETIC FILAMENT ERUPTIONS FROM A BIPOLAR HELMET STREAMER IN THE SUN

    International Nuclear Information System (INIS)

    Yang Jiayan; Jiang Yunchun; Zheng Ruisheng; Bi Yi; Hong Junchao; Yang Bo

    2012-01-01

    On 2005 August 5, two solar filaments erupted successively from different confined arcades underlying a common overarching multiple-arcade bipolar helmet streamer. We present detailed observations of these two events and identify them as sympathetic filament eruptions. The first (F1) is a small active-region filament located near the outskirts of the streamer arcade. It underwent a nonradial eruption, initially moving in the interior of the streamer arcade and resulting in an over-and-out coronal mass ejection. The second filament (F2), a larger quiescent one far away from F1, was clearly disturbed during the F1 eruption. It then underwent a very slow eruption and finally disappeared completely and permanently. Because two belt-shaped diffuse dimmings formed along the footprints of the streamer arcade in the first eruption and persisted throughout the complete disappearance of F2, the eruption series are interpreted as sympathetic: the simple expansion of the common streamer arcade forced by the F1 eruption weakened magnetic flux overlying F2 and thus led to its slow eruption, with the dimming formation indicating their physical connection. Our observations suggest that multiple-arcade bipolar helmet-streamer configurations are appropriate to producing sympathetic eruptions. Combined with the recent observations of unipolar-streamer sympathetic events, it appears that a multiple-arcade unipolar or bipolar helmet streamer can serve as a common magnetic configuration for sympathetic eruptions.

  18. Does helmet CPAP reduce cerebral blood flow and volume by comparison with Infant Flow driver CPAP in preterm neonates?

    Science.gov (United States)

    Zaramella, Patrizia; Freato, Federica; Grazzina, Nicoletta; Saraceni, Elisabetta; Vianello, Andrea; Chiandetti, Lino

    2006-10-01

    We compared neonatal helmet continuous positive airway pressure (CPAP) and the conventional nasal Infant Flow driver (IFD) CPAP in the noninvasive assessment of absolute cerebral blood flow (CBF) and relative cerebral blood volume changes (DeltaCBV) by near-infrared spectroscopy. A randomized crossover study in a tertiary referral NICU. Assessment of CBF and DeltaCBV in 17 very low birth weight infants with respiratory distress (median age 5 days) treated with two CPAP devices at a continuous distending pressure of 4 mbar. Neonates were studied for two consecutive 60-min periods with helmet CPAP and with IFD CPAP. Basal chromophore traces enabled DeltaCBV changes to be calculated. CBF was calculated in milliliters per 100 grams per minute from the saturation rise integral and rate of rise O(2)Hb-HHb. Median (range) CBF with helmet CPAP was 27.37 (9.47-48.20) vs. IFD CBF 34.74 (13.59-60.10)(p=0.049) and DeltaCBV 0.15 (0.09-0.28) with IFD and 0.13 (0.07-0.27) with helmet CPAP (NS). Using helmet and IFD CPAP, the neonates showed no difference in mean physiological parameters (transcutaneous carbon dioxide and oxygen tension, pulse oximetry saturation, heart rate, breathing rate, mean arterial blood pressure, desaturation rate, axillary temperature). Assessing CBF and DeltaCBV measured by near-infrared spectroscopy with two CPAP devices revealed no differences in relative blood volume, but CBF was lower with helmet CPAP. Greater active vasoconstriction and/or passive capillary and/or venous vessel compression seem the most likely reason, due to a positive pressure around the head, neck, and shoulders by comparison with the airway pressure.

  19. Integrating external biological knowledge in the construction of regulatory networks from time-series expression data

    Directory of Open Access Journals (Sweden)

    Lo Kenneth

    2012-08-01

    Full Text Available Abstract Background Inference about regulatory networks from high-throughput genomics data is of great interest in systems biology. We present a Bayesian approach to infer gene regulatory networks from time series expression data by integrating various types of biological knowledge. Results We formulate network construction as a series of variable selection problems and use linear regression to model the data. Our method summarizes additional data sources with an informative prior probability distribution over candidate regression models. We extend the Bayesian model averaging (BMA variable selection method to select regulators in the regression framework. We summarize the external biological knowledge by an informative prior probability distribution over the candidate regression models. Conclusions We demonstrate our method on simulated data and a set of time-series microarray experiments measuring the effect of a drug perturbation on gene expression levels, and show that it outperforms leading regression-based methods in the literature.

  20. Ballistic Characterization Of A Typical Military Steel Helmet

    Directory of Open Access Journals (Sweden)

    Mohamed Ali Maher

    2017-08-01

    Full Text Available In this study the ballistic limit of a steel helmet against a FMJ 919 mm caliber bullet is estimated. The helmet model is the typical polish helmet wz.31.The helmet material showed high strength low alloy steel material of 0.28 carbon content and 9.125 kgm2 areal density. The tensile test according to ASTM E8 showed a tensile strength of 1236.4 MPa .The average hardness value was about HV550. First shooting experiment has been executed using a 9 mm pistol based on 350 ms muzzle velocity at 5m against the simply supported helmet complete penetrations rose in this test were in the form of cracks on the helmet surface and partial penetrations were in the form of craters on the surface whose largest diameter and depth were 43 mm and 20.2 mm consequently .The second experiment was on a rifled gun arrangement 13 bullets of 919 mm caliber were shot on the examined simply supported steel helmet at a zero obliquity angle at different velocities to determine the ballistic limit velocity V50 according to MIL-STD-662F. Three major outcomes were revealed 1 the value V50 which found to be about 390 ms is higher than the one found in literature 360 ms German steel helmet model 1A1. 2 The smallest the standard deviation of the mixed results zone data the most accurate the ballistic limit is. 3Similar to the performance of blunt-ended projectiles impacting overmatching targets tD near 11 or larger It was found that the dominating failure mode of the steel helmet stuck by a hemispherical-nose projectile was plugging mode despite of having tD ratio of about 19 undermatching.

  1. BiGGEsTS: integrated environment for biclustering analysis of time series gene expression data

    Directory of Open Access Journals (Sweden)

    Madeira Sara C

    2009-07-01

    Full Text Available Abstract Background The ability to monitor changes in expression patterns over time, and to observe the emergence of coherent temporal responses using expression time series, is critical to advance our understanding of complex biological processes. Biclustering has been recognized as an effective method for discovering local temporal expression patterns and unraveling potential regulatory mechanisms. The general biclustering problem is NP-hard. In the case of time series this problem is tractable, and efficient algorithms can be used. However, there is still a need for specialized applications able to take advantage of the temporal properties inherent to expression time series, both from a computational and a biological perspective. Findings BiGGEsTS makes available state-of-the-art biclustering algorithms for analyzing expression time series. Gene Ontology (GO annotations are used to assess the biological relevance of the biclusters. Methods for preprocessing expression time series and post-processing results are also included. The analysis is additionally supported by a visualization module capable of displaying informative representations of the data, including heatmaps, dendrograms, expression charts and graphs of enriched GO terms. Conclusion BiGGEsTS is a free open source graphical software tool for revealing local coexpression of genes in specific intervals of time, while integrating meaningful information on gene annotations. It is freely available at: http://kdbio.inesc-id.pt/software/biggests. We present a case study on the discovery of transcriptional regulatory modules in the response of Saccharomyces cerevisiae to heat stress.

  2. DETECTION OF MOTORCYCLISTS WITHOUT HELMET AND FINEPAYMENT USING OPEN CV

    OpenAIRE

    Stemy Simon, Divya Kumaran A.K.

    2018-01-01

    The helmet is the main safety equipment of motorcyclists, but many drivers do not use it. The main aim of this project is to construct an automatic detection of the motorcyclist without helmet from video using OpenCV library tools. If they are not wearing the helmet, the license plate of the motorcycle is focused automatically. By using Computer Vision technique we can detect and recognize the license plate number. We make the training set of different characters of different sizes. Based on ...

  3. The implementation of a municipal indoor ice skating helmet policy: effects on helmet use, participation and attitudes.

    Science.gov (United States)

    O'Mahony-Menton, Colleen; Willmore, Jacqueline; Russell, Katherine

    2015-12-01

    In Ottawa, between 2005 and 2009 there was an annual average of 47.2 head injuries due to ice skating in children and youth (1-19 years of age) requiring a visit to the emergency department, with the highest rates among those aged 5-14 years. Between 2002 and 2007, only 6% of children were wearing a helmet during ice skating when the head injury occurred. During indoor public skating sessions, 93% of children (skating helmet policy coupled with education and promotional activities on helmet use, participation and attitudes towards helmet use. An ice skating helmet policy for children (skating experience at indoor rinks during public skating sessions was developed, implemented and evaluated. Supportive activities such as discount coupons, promotional materials, a media launch, social marketing and staff training are described. The helmet policy was associated with increased helmet use for young children and for older children, youth and adults not included in the policy, without decreasing attendance to public skating sessions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  4. Self-Powered Safety Helmet Based on Hybridized Nanogenerator for Emergency.

    Science.gov (United States)

    Jin, Long; Chen, Jun; Zhang, Binbin; Deng, Weili; Zhang, Lei; Zhang, Haitao; Huang, Xi; Zhu, Minhao; Yang, Weiqing; Wang, Zhong Lin

    2016-08-23

    The rapid development of Internet of Things and the related sensor technology requires sustainable power sources for their continuous operation. Scavenging and utilizing the ambient environmental energy could be a superior solution. Here, we report a self-powered helmet for emergency, which was powered by the energy converted from ambient mechanical vibration via a hybridized nanogenerator that consists of a triboelectric nanogenerator (TENG) and an electromagnetic generator (EMG). Integrating with transformers and rectifiers, the hybridized nanogenerator can deliver a power density up to 167.22 W/m(3), which was demonstrated to light up 1000 commercial light-emitting diodes (LEDs) instantaneously. By wearing the developed safety helmet, equipped with rationally designed hybridized nanogenerator, the harvested vibration energy from natural human motion is also capable of powering a wireless pedometer for real-time transmitting data reporting to a personal cell phone. Without adding much extra weight to a commercial one, the developed wearing helmet can be a superior sustainable power source for explorers, engineers, mine-workers under well, as well as and disaster-relief workers, especially in remote areas. This work not only presents a significant step toward energy harvesting from human biomechanical movement, but also greatly expands the applicability of TENGs as power sources for self-sustained electronics.

  5. The Cyclists Helmet Study in Juba, Southern Sudan, 2006

    African Journals Online (AJOL)

    Ann Burgess

    Juba has a poor road network and few public transport options, with an increasing number of people riding ... The conclusion is that cyclists need information on the importance of wearing a helmet. ... Leading safety advocates recommend the.

  6. High-Speed Solution of Spacecraft Trajectory Problems Using Taylor Series Integration

    Science.gov (United States)

    Scott, James R.; Martini, Michael C.

    2010-01-01

    It has been known for some time that Taylor series (TS) integration is among the most efficient and accurate numerical methods in solving differential equations. However, the full benefit of the method has yet to be realized in calculating spacecraft trajectories, for two main reasons. First, most applications of Taylor series to trajectory propagation have focused on relatively simple problems of orbital motion or on specific problems and have not provided general applicability. Second, applications that have been more general have required use of a preprocessor, which inevitably imposes constraints on computational efficiency. The latter approach includes the work of Berryman et al., who solved the planetary n-body problem with relativistic effects. Their work specifically noted the computational inefficiencies arising from use of a preprocessor and pointed out the potential benefit of manually coding derivative routines. In this Engineering Note, we report on a systematic effort to directly implement Taylor series integration in an operational trajectory propagation code: the Spacecraft N-Body Analysis Program (SNAP). The present Taylor series implementation is unique in that it applies to spacecraft virtually anywhere in the solar system and can be used interchangeably with another integration method. SNAP is a high-fidelity trajectory propagator that includes force models for central body gravitation with N X N harmonics, other body gravitation with N X N harmonics, solar radiation pressure, atmospheric drag (for Earth orbits), and spacecraft thrusting (including shadowing). The governing equations are solved using an eighth-order Runge-Kutta Fehlberg (RKF) single-step method with variable step size control. In the present effort, TS is implemented by way of highly integrated subroutines that can be used interchangeably with RKF. This makes it possible to turn TS on or off during various phases of a mission. Current TS force models include central body

  7. Passive Attenuating Communication Earphone (PACE): Noise Attenuation and Speech Intelligibility Performance When Worn in Conjunction with the HGU-56/P and HGU-55/P Flight Helmets

    Science.gov (United States)

    2013-10-16

    right) eartips The purpose of this study was to integrate the HGU-56/P and HGU-55/P flight helmets with PACE to measure the noise attenuation and...55/P flight helmet integrated with PACE 2.0 METHODS 2.1 Subjects Twenty paid volunteer subjects (9 male, 11 female) participated in the study ...Pan Pad Pat Path Pack Pass Buff Bus But Bug Buck Bun Sat Sag Sass Sack Sad Sap Run Sun Bun Gun Fun Nun 8 Distribution A: Approved for

  8. The Effects of Motorcycle Helmet Legislation on Craniomaxillofacial Injuries.

    Science.gov (United States)

    Adams, Nicholas S; Newbury, Patrick A; Eichhorn, Mitchell G; Davis, Alan T; Mann, Robert J; Polley, John W; Girotto, John A

    2017-06-01

    Motorcycle helmet legislation has been a contentious topic for over a half-century. Benefits of helmet use in motorcycle trauma patients are well documented. In 2012, Michigan repealed its universal motorcycle helmet law in favor of a partial helmet law. The authors describe the early clinical effects on facial injuries throughout Michigan. Retrospective data from the Michigan Trauma Quality Improvement Program trauma database were evaluated. Included were 4643 motorcycle trauma patients presenting to 29 Level I and II trauma centers throughout Michigan 3 years before and after the law repeal (2009 to 2014). Demographics, external cause of injury codes, International Classification of Diseases, Ninth Revision diagnosis codes, and injury details were gathered. The proportion of unhelmeted trauma patients increased from 20 percent to 44 percent. Compared with helmeted trauma patients, unhelmeted patients were nearly twice as likely to sustain craniomaxillofacial injuries (relative risk, 1.90), including fractures (relative risk, 2.02) and soft-tissue injuries (relative risk, 1.94). Unhelmeted patients had a lower Glasgow Coma Scale score and higher Injury Severity Scores. Patients presenting after helmet law repeal were more likely to sustain craniomaxillofacial injuries (relative risk, 1.46), including fractures (relative risk, 1.28) and soft-tissue injuries (relative risk, 1.56). No significant differences were observed for age, sex, Injury Severity Score, or Glasgow Coma Scale score (p > 0.05). This study highlights the significant negative impact of relaxed motorcycle helmet laws leading to an increase in craniomaxillofacial injuries. The authors urge state and national legislators to reestablish universal motorcycle helmet laws.

  9. Methodologies for Blunt Trauma Assessment in Military Helmets

    Science.gov (United States)

    2010-09-13

    Assessment; Monorail Drop Tower 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 10 19a. NAME OF RESPONSIBLE...Laboratory Test Procedure for Motorcycle Helmets (TP-218-06) [8]. TP-218-06 specifies a guided monorail drop and provides requirements for how helmets...a hemispherical anvil. The monorail restricts movement to control the impact location, and acceleration is measured using a uniaxial accelerometer

  10. Combat Helmet-Headform Coupling Characterized from Blunt Impact Events

    Science.gov (United States)

    2011-11-01

    Testing was completed on a monorail drop tower to analyze the effect of helmet/headform coupling on the blunt impact behavior of ACH helmets using FMVSS...designates its own methods and test equipment: a drop tower ( monorail or twin- wire), headform (DOT, ISO, NOCSAE), headform CG accelerometer (single or...the more anthropomorphic International Standard Organization (ISO) half headform. Testing was completed on a monorail drop tower to analyze the effect

  11. Astronauts Parise and Jernigan check helmets prior to training session

    Science.gov (United States)

    1994-01-01

    Attired in training versions of the Shuttle partial-pressure launch and entry suits, payload specialist Dr. Ronald A Parise (left) and astronaut Tamara E. Jernigan, payload commander, check over their helmets prior to a training session. Holding the helmets is suit expert Alan M. Rochford, of NASA. The two were about to join their crew mates in a session of emergency bailout training at JSC's Weightless Environment Training Facility (WETF).

  12. Conversion coefficients for individual monitoring calculated with integrated tiger series, ITS3, Monte Carlo code

    International Nuclear Information System (INIS)

    Devine, R.T.; Hsu, Hsiao-Hua

    1994-01-01

    The current basis for conversion coefficients for calibrating individual photon dosimeters in terms of dose equivalents is found in the series of papers by Grosswent. In his calculation the collision kerma inside the phantom is determined by calculation of the energy fluence at the point of interest and the use of the mass energy absorption coefficient. This approximates the local absorbed dose. Other Monte Carlo methods can be sued to provide calculations of the conversion coefficients. Rogers has calculated fluence-to-dose equivalent conversion factors with the Electron-Gamma Shower Version 3, EGS3, Monte Carlo program and produced results similar to Grosswent's calculations. This paper will report on calculations using the Integrated TIGER Series Version 3, ITS3, code to calculate the conversion coefficients in ICRU Tissue and in PMMA. A complete description of the input parameters to the program is given and comparison to previous results is included

  13. Correlates and Barriers Associated with Motorcycle Helmet Use in Wa, Ghana.

    Science.gov (United States)

    Akaateba, Millicent Awialie; Yakubu, Ibrahim; Akanbang, Bernard Afiik Akanpabadai

    2015-01-01

    This study was conducted to investigate the correlates and barriers to helmet use among motorcycle riders in Wa, a motorcycle-predominant town in Ghana. An additional objective was to determine the association between helmet use and riders' knowledge, attitudes, and beliefs toward helmets. Cross-sectional surveys including both observation of helmet use and interviews were conducted among motorcycle riders at 6 randomly selected fuel stations and 4 motorcycle service centers within and outside the Central Business District of Wa. Questions covered riders' sociodemographic and riding characteristics, helmet use, reasons for use or nonuse of helmets, and knowledge, attitudes, and beliefs about helmets. Analyses were based on frequencies and testing of strength of association using adjusted odds ratios (with 95% confidence intervals) in binary logistic regression. The prevalence of helmet use among the 271 sampled riders was 46% (95% confidence interval [CI], 40.2-52.0). Gender, age, marital status, and occupation were significant sociodemographic correlates of helmet use in Wa. Compared to currently married riders, unmarried riders were 5 times less likely to use a helmet. No significant association existed between riders' educational attainment and helmet use. Helmet use was also positively correlated with helmet ownership and license holding. The leading reasons stated for helmet nonuse among nonusers were not traveling a long distance and helmets block vision and hearing. Protection from injury, legal requirement, and coping with the police for fear of being accosted for helmet nonuse were identified as common reasons for helmet use. Positive attitudes and beliefs were also significantly correlated with helmet use. Despite the existence of a legislation mandating the use of helmets on all roads as well as the high level of awareness among riders on this legislation and the benefits of helmets, the incidence of helmet use among motorists continue to be low in Wa

  14. Measurement of Gamma Knife registered helmet factors using MOSFETs

    International Nuclear Information System (INIS)

    Kurjewicz, Laryssa; Berndt, Anita

    2007-01-01

    The relative dose rate for the different Gamma Knife registered helmets (4, 8, 14, and 18 mm) is characterized by their respective helmet factors. Since the plateau of the dose profile for the 4 mm helmet is at most 1 mm wide, detector choices are limited. Traditionally helmet factors have been measured using 1x1x1 mm 3 thermoluminescent dosimeters (TLDs). However, these are time-consuming, cumbersome measurements. This article investigates the use of metal-oxide-semiconductor field effect transistors (MOSFETs) (active area of 0.2x0.2 mm 2 ) as a more accurate and convenient dosimeter. Their suitability for these measurements was confirmed by basic characterization measurements. Helmet factors were measured using both MOSFETs and the established TLD approach. A custom MOSFET cassette was designed in analogy to the Elekta TLD cassette (Elekta Instruments AB) for use with the Elekta dosimetry sphere. Although both dosimeters provided values within 3% of the manufacturer's suggestion, MOSFETs provided superior accuracy and precision, in a fraction of the time required for the TLD measurements. Thus, MOSFETs proved to be a reasonable alternative to TLDs for performing helmet factor measurements

  15. Does law enforcement awareness affect motorcycle helmet use? evidence from urban cities in Thailand.

    Science.gov (United States)

    Jiwattanakulpaisarn, Piyapong; Kanitpong, Kunnawee; Ponboon, Sattrawut; Boontob, Nuttapong; Aniwattakulchai, Pakorn; Samranjit, Supattra

    2013-09-01

    Although helmet use has been compulsory for motorcycle drivers and passengers in Thailand since the enactment of the Helmet Act in 1994, recent surveys show that the prevalence of helmet usage remains low, particularly among passengers. This paper has sought to explore motorcyclists' awareness of helmet law enforcement in Thailand and examine whether it affects their helmet use behaviour. A total of 2,429 drivers and 1,328 passengers in urban cities nationwide were interviewed in 2009, and the data were analysed using a multivariate ordered logit regression technique. About 60% of the drivers and only 28% of the passengers reported that they always wore a motorcycle helmet. Apart from basic demographics (i.e. age and gender) and riding frequency, our analysis reveals that the awareness of helmet law enforcement was among the contributing factors influencing the use of motorcycle helmets in Thailand. Regardless of riding position, the prevalence of helmet use tended to be greater among those frequently observing the police's checkpoints for helmet wearing and those perceiving the high risk of being caught for non-helmet use. However, the use of helmets appeared to be lower among drivers who perceived the checkpoints to take place at the same times and locations, which were likely predicted. For motorcycle passengers, it was found that the low prevalence of helmet use was potentially attributable to the absence of knowledge on the compulsory helmet law for passengers and the perception that the law was not enforced by the police. Thus, if motorcycle helmet use in Thailand is to be increased, considerable efforts need to be given to increasing the perceived risk of apprehension for non-helmet use (e.g. more police presence and random scheduling of enforcement activities), improving the awareness of the existing helmet law for passengers, and ensuring that helmet wearing by passengers is more strictly enforced.

  16. Several properties of generalized multivariate integrals and theorems of the du Bois-Reymond type for Haar series

    International Nuclear Information System (INIS)

    Plotnikov, M G

    2007-01-01

    Several properties of generalized multivariate integrals are considered. In the two-dimensional case the consistency of the regular Perron integral is proved, as well as the consistency of a generalized integral solving the problem of the recovery of the coefficients of double Haar series in a certain class. Several generalizations of Skvortsov's well-known theorem are obtained as consequences, for instance, the following result: if a double Haar series converges for some ρ element of (0,1/2] ρ-regularly everywhere in the unit square to a finite function that is Perron-integrable in the ρ-regular sense, then the series in question is the Fourier-Perron series of its sum. Bibliography: 20 titles.

  17. High School Football Players Use Their Helmets to Tackle Other Players Despite Knowing the Risks.

    Science.gov (United States)

    Kuriyama, Andrew M; Nakatsuka, Austin S; Yamamoto, Loren G

    2017-03-01

    There is greater attention to head-related injuries and concussions in American football. The helmet's structural safety and the way that football players use their helmets are important in preventing head injuries. Current strategies include penalizing players for high-risk behavior such as leading with their helmet or hitting an opposing player above the shoulder. Passive strategies include helmet modification to better protect the head of the players or to change the playing style of the players. Hawai'i high school varsity football players were surveyed to determine how they use their helmets and how a new helmet design would affect their style of play. One hundred seventy-seven surveys were completed; 79% said that they used their helmet to hit an opposing player during a tackle and 46% said they made this contact intentionally. When asked about modifying helmets with a soft material on the outside, 48% said they thought putting a soft cover over a regular helmet would protect their head better. However, many participants said that putting a soft cover over their regular helmet was a bad idea for various reasons. Most young football players use their helmets to block or tackle despite being taught they would be penalized or potentially injured if they did so. By gaining a better understanding of why and how players use their helmets and how they would respond to new helmet designs, steps can be taken to reduce head injuries for all levels of play.

  18. Universal Motorcycle Helmet Laws to Reduce Injuries: A Community Guide Systematic Review.

    Science.gov (United States)

    Peng, Yinan; Vaidya, Namita; Finnie, Ramona; Reynolds, Jeffrey; Dumitru, Cristian; Njie, Gibril; Elder, Randy; Ivers, Rebecca; Sakashita, Chika; Shults, Ruth A; Sleet, David A; Compton, Richard P

    2017-06-01

    Motorcycle crashes account for a disproportionate number of motor vehicle deaths and injuries in the U.S. Motorcycle helmet use can lead to an estimated 42% reduction in risk for fatal injuries and a 69% reduction in risk for head injuries. However, helmet use in the U.S. has been declining and was at 60% in 2013. The current review examines the effectiveness of motorcycle helmet laws in increasing helmet use and reducing motorcycle-related deaths and injuries. Databases relevant to health or transportation were searched from database inception to August 2012. Reference lists of reviews, reports, and gray literature were also searched. Analysis of the data was completed in 2014. A total of 60 U.S. studies qualified for inclusion in the review. Implementing universal helmet laws increased helmet use (median, 47 percentage points); reduced total deaths (median, -32%) and deaths per registered motorcycle (median, -29%); and reduced total injuries (median, -32%) and injuries per registered motorcycle (median, -24%). Repealing universal helmet laws decreased helmet use (median, -39 percentage points); increased total deaths (median, 42%) and deaths per registered motorcycle (median, 24%); and increased total injuries (median, 41%) and injuries per registered motorcycle (median, 8%). Universal helmet laws are effective in increasing motorcycle helmet use and reducing deaths and injuries. These laws are effective for motorcyclists of all ages, including younger operators and passengers who would have already been covered by partial helmet laws. Repealing universal helmet laws decreased helmet use and increased deaths and injuries. Published by Elsevier Inc.

  19. Prehospital emergency removal of football helmets using two techniques.

    Science.gov (United States)

    Swartz, Erik E; Hernandez, Adam E; Decoster, Laura C; Mihalik, Jason P; Burns, Matthew F; Reynolds, Cathryn

    2011-01-01

    To compare the Eject Helmet Removal (EHR) System with manual football helmet removal. This quasiexperimental counterbalanced study was conducted in a controlled laboratory setting. Thirty certified athletic trainers (17 men and 13 women; mean ± standard deviation age: 33.03 ± 10.02 years; height: 174.53 ± 12.04 cm; mass: 85.19 ± 19.84 kg) participated after providing informed consent. Participants removed a Riddell Revolution IQ football helmet from a healthy model two times each under two conditions: manual helmet removal (MHR) and removal with the EHR system. A six-camera, three-dimensional motion capture system was used to record range of motion (ROM) of the head. A digital stopwatch was used to time trials and to record a split time associated with EHR system bladder insertion. A modified Borg CR10 scale was used to measure the rating of perceived exertion (RPE). Mean values were created for each variable. Three pairwise t-tests with Bonferroni-corrected alpha levels tested for differences between time for removal, split time, and RPE. A 2 x 3 (condition x plane) totally within-subjects repeated-measures design analysis of variance (ANOVA) tested for differences in head ROM between the sagittal, frontal, and transverse planes. Analyses were performed using SPSS (version 18.0) (alpha = 0.05). There was no statistically significant difference in perceived difficulty between EHR (RPE = 2.73) and MHR (RPE = 2.55) (t(29) = 0.76; p = 0.45; d = 0.20). Manual helmet removal was, on average, 28.95 seconds faster than EHR (t(29) = 11.44; p football helmets and in helmets used in other sports such as lacrosse, motorsports, and ice hockey.

  20. Brain tissue analysis of impacts to American football helmets.

    Science.gov (United States)

    Post, Andrew; Kendall, Marshall; Cournoyer, Janie; Karton, Clara; Oeur, R Anna; Dawson, Lauren; Hoshizaki, T Blaine

    2018-02-01

    Concussion in American football is a prevalent concern. Research has been conducted examining frequencies, location, and thresholds for concussion from impacts. Little work has been done examining how impact location may affect risk of concussive injury. The purpose of this research was to examine how impact site on the helmet and type of impact, affects the risk of concussive injury as quantified using finite element modelling of the human head and brain. A linear impactor was used to impact a helmeted Hybrid III headform in several locations and using centric and non-centric impact vectors. The resulting dynamic response was used as input for the Wayne State Brain Injury Model to determine the risk of concussive injury by utilizing maximum principal strain as the predictive variable. The results demonstrated that impacts that occur primarily to the side of the head resulted in higher magnitudes of strain in the grey and white matter, as well as the brain stem. Finally, commonly worn American football helmets were used in this research and significant risk of injury was incurred for all impacts. These results suggest that improvements in American football helmets are warranted, in particular for impacts to the side of the helmet.

  1. Accelerating execution of the integrated TIGER series Monte Carlo radiation transport codes

    International Nuclear Information System (INIS)

    Smith, L.M.; Hochstedler, R.D.

    1997-01-01

    Execution of the integrated TIGER series (ITS) of coupled electron/photon Monte Carlo radiation transport codes has been accelerated by modifying the FORTRAN source code for more efficient computation. Each member code of ITS was benchmarked and profiled with a specific test case that directed the acceleration effort toward the most computationally intensive subroutines. Techniques for accelerating these subroutines included replacing linear search algorithms with binary versions, replacing the pseudo-random number generator, reducing program memory allocation, and proofing the input files for geometrical redundancies. All techniques produced identical or statistically similar results to the original code. Final benchmark timing of the accelerated code resulted in speed-up factors of 2.00 for TIGER (the one-dimensional slab geometry code), 1.74 for CYLTRAN (the two-dimensional cylindrical geometry code), and 1.90 for ACCEPT (the arbitrary three-dimensional geometry code)

  2. Accelerating execution of the integrated TIGER series Monte Carlo radiation transport codes

    Science.gov (United States)

    Smith, L. M.; Hochstedler, R. D.

    1997-02-01

    Execution of the integrated TIGER series (ITS) of coupled electron/photon Monte Carlo radiation transport codes has been accelerated by modifying the FORTRAN source code for more efficient computation. Each member code of ITS was benchmarked and profiled with a specific test case that directed the acceleration effort toward the most computationally intensive subroutines. Techniques for accelerating these subroutines included replacing linear search algorithms with binary versions, replacing the pseudo-random number generator, reducing program memory allocation, and proofing the input files for geometrical redundancies. All techniques produced identical or statistically similar results to the original code. Final benchmark timing of the accelerated code resulted in speed-up factors of 2.00 for TIGER (the one-dimensional slab geometry code), 1.74 for CYLTRAN (the two-dimensional cylindrical geometry code), and 1.90 for ACCEPT (the arbitrary three-dimensional geometry code).

  3. Truncation of the Series Expressions in the Advanced ENZ-Theory of Diffraction Integrals

    Science.gov (United States)

    van Haver, S.; Janssen, A. J. E. M.

    2014-09-01

    The point-spread function (PSF) is used in optics for design and assessment of the imaging capabilities of an optical system. It is therefore of vital importance that this PSF can be calculated fast and accurately. In the past 12 years, the Extended Nijboer-Zernike (ENZ) approach has been developed for the purpose of semi-analytic evaluation of the PSF, for circularly symmetric optical systems, in the focal region. In the earliest ENZ-years, the Debye approximation of the diffraction integral, by which the PSF is given, was considered for the very basic situation of a low-NA optical system and relatively small defocus values, so that a scalar treatment was allowed with a focal factor comprising a quadratic function in the exponential. At present, the ENZ-method allows calculation of the PSF in low- and high-NA cases, in scalar form and for vector fields (including polarization), for large wave-front aberrations, including amplitude non-uniformities, using a quasi-spherical phase focal factor in a virtually unlimited focal range around the focal plane, and no limitations in the off-axis direction. Additionally, the application range of the method has been broadened and generalized to the calculation of aerial images of extended objects by including the finite distance of the object to the entrance pupil. Also imaging into a multi-layer is now possible by accounting for both forward and backward propagation in the layers. In the advanced ENZ-approach, the generalized, complex-valued pupil function is developed into a series of Zernike circle polynomials, with exponential azimuthal dependence (having cosine/sine azimuthal dependence as special cases). For each Zernike term, the diffraction integral reduces after azimuthal integration to an integral that can be expressed as an infinite double series involving spherical Bessel functions, accounting for the parameters of the optical system and the defocus value, and Jinc functions comprising the radial off-axis value

  4. A Thermal Test System for Helmet Cooling Studies

    Directory of Open Access Journals (Sweden)

    Shaun Fitzgerald

    2018-02-01

    Full Text Available One of the primary causes of discomfort to both irregular and elite cyclists is heat entrapment by a helmet resulting in overheating and excessive sweating of the head. To accurately assess the cooling effectiveness of bicycle helmets, a heated plastic thermal headform has been developed. The construction consists of a 3D-printed headform of low thermal conductivity with an internal layer of high thermal mass that is heated to a constant uniform temperature by an electrical heating element. Testing is conducted in a wind tunnel where the heater power remains constant and the resulting surface temperature distribution is directly measured by 36 K-type thermocouples embedded within the surface of the head in conjunction with a thermal imaging camera. Using this new test system, four bicycle helmets were studied in order to measure their cooling abilities and to identify ‘hot spots’ where cooling performance is poor.

  5. Nano-Composite Foam Sensor System in Football Helmets.

    Science.gov (United States)

    Merrell, A Jake; Christensen, William F; Seeley, Matthew K; Bowden, Anton E; Fullwood, David T

    2017-12-01

    American football has both the highest rate of concussion incidences as well as the highest number of concussions of all contact sports due to both the number of athletes and nature of the sport. Recent research has linked concussions with long term health complications such as chronic traumatic encephalopathy and early onset Alzheimer's. Understanding the mechanical characteristics of concussive impacts is critical to help protect athletes from these debilitating diseases and is now possible using helmet-based sensor systems. To date, real time on-field measurement of head impacts has been almost exclusively measured by devices that rely on accelerometers or gyroscopes attached to the player's helmet, or embedded in a mouth guard. These systems monitor motion of the head or helmet, but do not directly measure impact energy. This paper evaluates the accuracy of a novel, multifunctional foam-based sensor that replaces a portion of the helmet foam to measure impact. All modified helmets were tested using a National Operating Committee Standards for Athletic Equipment-style drop tower with a total of 24 drop tests (4 locations with 6 impact energies). The impacts were evaluated using a headform, instrumented with a tri-axial accelerometer, mounted to a Hybrid III neck assembly. The resultant accelerations were evaluated for both the peak acceleration and the severity indices. These data were then compared to the voltage response from multiple Nano Composite Foam sensors located throughout the helmet. The foam sensor system proved to be accurate in measuring both the HIC and Gadd severity index, as well as peak acceleration while also providing additional details that were previously difficult to obtain, such as impact energy.

  6. Helmet-induced headache among Danish military personnel.

    Science.gov (United States)

    Rahmani, Zakia; Kochanek, Aneta; Astrup, Jesper Johnsen; Poulsen, Jeppe Nørgaard; Gazerani, Parisa

    2017-12-01

    External compression headache is defined as a headache caused by an external physical compression applied on the head. It affects about 4% of the general population; however, certain populations (e.g. construction workers and military personnel) with particular needs of headwear or helmet are at higher risk of developing this type of headache. External compression headache is poorly studied in relation to specific populations. This study aimed to investigate the prevalence and pattern of helmet-induced external compression headache among Danish military personnel of the Northern Jutland region in Denmark. Data acquisition was based on a custom-made questionnaire delivered to volunteers who used helmets in the Danish military service and who agreed to participate in this study. The military of the Northern Jutland region of Denmark facilitated recruitment of the participants. The questionnaires were delivered on paper and the collected (anonymous) answers (total 279) were used for further analysis. About 30% of the study participants reported headache in relation to wearing a military helmet. Headache was defined as a pressing pain predominantly in the front of the head with an average intensity of 4 on a visual analogue scale of 0 (no pain) to 10 (worst pain imaginable). It was also found that helmets with different designs influenced both the occurrence of headache and its characteristics. This study is the first to demonstrate the prevalence and pattern of compression headache among military personnel in North Jutland, Denmark. The findings of this study call for further attention to helmet-induced external compression headache and strategies to minimize the burden.

  7. INTER LABORATORY COMBAT HELMET BLUNT IMPACT TEST METHOD COMPARISON

    Science.gov (United States)

    2018-03-26

    data by Instrumentation for Impact  Test , SAE standard J211‐1 [4]. Although the entire curve is collected, the interest of this  project  team  solely...HELMET BLUNT IMPACT TEST METHOD COMPARISON by Tony J. Kayhart Charles A. Hewitt and Jonathan Cyganik March 2018 Final...INTER-LABORATORY COMBAT HELMET BLUNT IMPACT TEST METHOD COMPARISON 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR

  8. The Influence of Friction Between Football Helmet and Jersey Materials on Force: A Consideration for Sport Safety.

    Science.gov (United States)

    Rossi, Anthony M; Claiborne, Tina L; Thompson, Gregory B; Todaro, Stacey

    2016-09-01

    The pocketing effect of helmet padding helps to dissipate forces experienced by the head, but if the player's helmet remains stationary in an opponent's shoulder pads, the compressive force on the cervical spine may increase. To (1) measure the coefficient of static friction between different football helmet finishes and football jersey fabrics and (2) calculate the potential amount of force on a player's helmet due to the amount of friction present. Cross-sectional study. Laboratory. Helmets with different finishes and different football jersey fabrics. The coefficient of friction was determined for 2 helmet samples (glossy and matte), 3 football jerseys (collegiate, high school, and youth), and 3 types of jersey numbers (silkscreened, sublimated, and stitched on) using the TAPPI T 815 standard method. These measurements determined which helmet-to-helmet, helmet-to-jersey number, and helmet-to-jersey material combination resulted in the least amount of static friction. The glossy helmet versus glossy helmet combination produced a greater amount of static friction than the other 2 helmet combinations (P = .013). The glossy helmet versus collegiate jersey combination produced a greater amount of static friction than the other helmet-to-jersey material combinations (P < .01). The glossy helmet versus silkscreened numbers combination produced a greater amount of static friction than the other helmet-to-jersey number combinations (P < .01). The force of static friction experienced during collisions can be clinically relevant. Conditions with higher coefficients of static friction result in greater forces. In this study, the highest coefficient of friction (glossy helmet versus silkscreened number) could increase the forces on the player's helmet by 3553.88 N when compared with other helmet-to-jersey combinations. Our results indicate that the makeup of helmet and uniform materials may affect sport safety.

  9. Paternalism and its discontents: motorcycle helmet laws, libertarian values, and public health.

    Science.gov (United States)

    Jones, Marian Moser; Bayer, Ronald

    2007-02-01

    The history of motorcycle helmet legislation in the United States reflects the extent to which concerns about individual liberties have shaped the public health debate. Despite overwhelming epidemiological evidence that motorcycle helmet laws reduce fatalities and serious injuries, only 20 states currently require all riders to wear helmets. During the past 3 decades, federal government efforts to push states toward enactment of universal helmet laws have faltered, and motorcyclists' advocacy groups have been successful at repealing state helmet laws. This history raises questions about the possibilities for articulating an ethics of public health that would call upon government to protect citizens from their own choices that result in needless morbidity and suffering.

  10. ITS - The integrated TIGER series of coupled electron/photon Monte Carlo transport codes

    International Nuclear Information System (INIS)

    Halbleib, J.A.; Mehlhorn, T.A.

    1985-01-01

    The TIGER series of time-independent coupled electron/photon Monte Carlo transport codes is a group of multimaterial, multidimensional codes designed to provide a state-of-the-art description of the production and transport of the electron/photon cascade. The codes follow both electrons and photons from 1.0 GeV down to 1.0 keV, and the user has the option of combining the collisional transport with transport in macroscopic electric and magnetic fields of arbitrary spatial dependence. Source particles can be either electrons or photons. The most important output data are (a) charge and energy deposition profiles, (b) integral and differential escape coefficients for both electrons and photons, (c) differential electron and photon flux, and (d) pulse-height distributions for selected regions of the problem geometry. The base codes of the series differ from one another primarily in their dimensionality and geometric modeling. They include (a) a one-dimensional multilayer code, (b) a code that describes the transport in two-dimensional axisymmetric cylindrical material geometries with a fully three-dimensional description of particle trajectories, and (c) a general three-dimensional transport code which employs a combinatorial geometry scheme. These base codes were designed primarily for describing radiation transport for those situations in which the detailed atomic structure of the transport medium is not important. For some applications, it is desirable to have a more detailed model of the low energy transport. The system includes three additional codes that contain a more elaborate ionization/relaxation model than the base codes. Finally, the system includes two codes that combine the collisional transport of the multidimensional base codes with transport in macroscopic electric and magnetic fields of arbitrary spatial dependence

  11. Multiclass classification for skin cancer profiling based on the integration of heterogeneous gene expression series.

    Science.gov (United States)

    Gálvez, Juan Manuel; Castillo, Daniel; Herrera, Luis Javier; San Román, Belén; Valenzuela, Olga; Ortuño, Francisco Manuel; Rojas, Ignacio

    2018-01-01

    Most of the research studies developed applying microarray technology to the characterization of different pathological states of any disease may fail in reaching statistically significant results. This is largely due to the small repertoire of analysed samples, and to the limitation in the number of states or pathologies usually addressed. Moreover, the influence of potential deviations on the gene expression quantification is usually disregarded. In spite of the continuous changes in omic sciences, reflected for instance in the emergence of new Next-Generation Sequencing-related technologies, the existing availability of a vast amount of gene expression microarray datasets should be properly exploited. Therefore, this work proposes a novel methodological approach involving the integration of several heterogeneous skin cancer series, and a later multiclass classifier design. This approach is thus a way to provide the clinicians with an intelligent diagnosis support tool based on the use of a robust set of selected biomarkers, which simultaneously distinguishes among different cancer-related skin states. To achieve this, a multi-platform combination of microarray datasets from Affymetrix and Illumina manufacturers was carried out. This integration is expected to strengthen the statistical robustness of the study as well as the finding of highly-reliable skin cancer biomarkers. Specifically, the designed operation pipeline has allowed the identification of a small subset of 17 differentially expressed genes (DEGs) from which to distinguish among 7 involved skin states. These genes were obtained from the assessment of a number of potential batch effects on the gene expression data. The biological interpretation of these genes was inspected in the specific literature to understand their underlying information in relation to skin cancer. Finally, in order to assess their possible effectiveness in cancer diagnosis, a cross-validation Support Vector Machines (SVM

  12. Injuries of the head from backface deformation of ballistic protective helmets under ballistic impact.

    Science.gov (United States)

    Rafaels, Karin A; Cutcliffe, Hattie C; Salzar, Robert S; Davis, Martin; Boggess, Brian; Bush, Bryan; Harris, Robert; Rountree, Mark Steve; Sanderson, Ellory; Campman, Steven; Koch, Spencer; Dale Bass, Cameron R

    2015-01-01

    Modern ballistic helmets defeat penetrating bullets by energy transfer from the projectile to the helmet, producing helmet deformation. This deformation may cause severe injuries without completely perforating the helmet, termed "behind armor blunt trauma" (BABT). As helmets become lighter, the likelihood of larger helmet backface deformation under ballistic impact increases. To characterize the potential for BABT, seven postmortem human head/neck specimens wearing a ballistic protective helmet were exposed to nonperforating impact, using a 9 mm, full metal jacket, 124 grain bullet with velocities of 400-460 m/s. An increasing trend of injury severity was observed, ranging from simple linear fractures to combinations of linear and depressed fractures. Overall, the ability to identify skull fractures resulting from BABT can be used in forensic investigations. Our results demonstrate a high risk of skull fracture due to BABT and necessitate the prevention of BABT as a design factor in future generations of protective gear. © 2014 American Academy of Forensic Sciences.

  13. The effects of motorcycle helmets on hearing and the detection of warning signals

    Science.gov (United States)

    Van Moorhem, W. K.; Shepherd, K. P.; Magleby, T. D.; Torian, G. E.

    1981-07-01

    Measurements of the at-ear helmet-generated aerodynamic noise and helmet insertion loss were carried out for the two major types of motorcycle helmets. From these data and existing information on noise generation by flow around a bare head it was found that for quiet motorcycles at typical operating speeds a significant part of the riders at-ear noise is generated by the air flow. An assessment of the possibility of hearing damage was then carried out. It was found that only with extremely high usage would there be a significant risk of hearing damage for either the bare headed or helmeted rider. Helmets did, however, give significant protection. Detection of warning signals was then considered. It was found that under none of the conditions investigated here did the helmet put its wearer at a disadvantage compared with the bare headed rider, and at typical constant speeds the helmet gave a rider an advantage in the detection of warning signals.

  14. Do helmets worn for hurling fail to protect the ear? Identification of an emerging injury pattern.

    LENUS (Irish Health Repository)

    Martin-Smith, James D

    2012-12-01

    Hurling is an Irish national game of stick and ball known for its ferocity, played by 190 000 players. Facial injuries were common but have been significantly reduced by legislation enforcing compulsory helmet wearing. Current standard helmets worn by hurlers do not offer protection to the external ear. Here we describe an emerging pattern of ear injuries and demonstrate the risk of external ear injuries in hurlers complying with current helmet safety standards. A 6-month retrospective analysis was carried out of patients attending Cork University Hospital (CUH) with ear lacerations sustained while hurling. Patient notes were reviewed and helmet manufacturers were interviewed. Seven patients were identified, all of whom sustained complex through ear lacerations while wearing helmets complying with current safety standards. Current helmet design fails to protect the external ear placing it at an increased risk of injury, a potential solution is to include ear protection in the helmet design.

  15. The effects of dynamic friction in oblique motorcycle helmet impacts

    Science.gov (United States)

    Bonugli, Enrique

    The purpose of this study was to determine the frictional properties between the exterior surface of a motorcycle helmet and 'typical' roadway surfaces. These values were compared to abrasive papers currently recommended by government helmet safety standards and widely used by researchers in the field of oblique motorcycle helmet impacts. A guided freefall test fixture was utilized to obtain nominal impact velocities of 5, 7 and 9 m/s. The impacting surfaces were mounted to an angled anvil to simulate off-centered oblique collision. Head accelerations and impact forces were measured for each test. Analysis of the normal and tangential forces imparted to the contact surface indicated that the frictional properties of abrasive papers differ from asphalt and cement in magnitude, duration and onset. Reduction in head acceleration, both linear and angular, were observed when asphalt and cement were used as the impacting surface. Roofing shingle was determined to be a more suitable material to simulate 'typical' roadway surfaces however, this may not be ideal for use in a controlled laboratory setting. In a laboratory setting, the author recommends cement as a best-fit material to simulate roadway surface for use in oblique motorcycle helmet impacts since this material displayed characteristics that closely resemble asphalt and is currently used as a roadway construction material.

  16. Effects of ventilated safety helmets in a hot environment

    Science.gov (United States)

    G.A. Davis; E.D. Edmisten; R.E. Thomas; R.B. Rummer; D.D. Pascoe

    2001-01-01

    Forest workers are likely to remove head protection in hot and humid conditions because of thermal discomfort. However, a recent Occupational Safety and Health Administration (OSHA) regulation revision requires all workers in logging operations to wear safety helmets, thus creating a compliance problem. To determine which factors contribute to forest workers’ thermal...

  17. Helmets: A Threat to the Preservation of Women's Lacrosse

    Science.gov (United States)

    Bull, Ashley; Cavanaugh, Lauren

    2016-01-01

    A recent debate has raised controversy over the implementation of helmets in the game of women's lacrosse. Women have been participating in this game of finesse and skill without the need for safety equipment, yet in the past decade goggles have been mandated to compensate for the technological advancements in equipment that has increased the…

  18. Confinement lowers fertility rate of helmeted guinea fowl ( Numida ...

    African Journals Online (AJOL)

    ... common game bird in Africa and there have been efforts to domesticate it for use as a source of human food. An important obstacle in successful domestication of guinea fowl is their low fertility rate.We studied the effects of semi-confinement on the fertility rates of helmeted guinea fowl by comparing egg fertility, hatch rate ...

  19. Helmet-Induced Occipital Neuralgia in a Military Aviator.

    Science.gov (United States)

    Chalela, Julio A

    2018-04-01

    Headaches among military personnel are very common and headgear wear is a frequently identified culprit. Helmet wear may cause migrainous headaches, external compression headache, other primary cranial neuralgias, and occipital neuralgia. The clinical features and the response to treatment allow distinction between the different types of headaches. Headaches among aviators are particularly concerning as they may act as distractors while flying and the treatment options are often incompatible with flying status. A 24-yr-old door gunner presented with suboccipital pain associated with the wear of his helmet. He described the pain as a paroxysmal stabbing sensation coming in waves. The physical exam and history supported the diagnosis of primary occipital neuralgia. Systemic pharmacological options were discussed with the soldier, but rejected due to his need to remain in flying status. An occipital nerve block was performed with good clinical results, supporting the diagnosis of occipital neuralgia and allowing him to continue as mission qualified. Occipital neuralgia can be induced by helmet wear in military personnel. Occipital nerve block can be performed in the deployed setting, allowing the service member to remain mission capable and sparing him/her from systemic side effects.Chalela JA. Helmet-induced occipital neuralgia in a military aviator. Aerosp Med Hum Perform. 2018; 89(4):409-410.

  20. Further Analysis of Motorcycle Helmet Effectiveness Using CODES Linked Data

    Science.gov (United States)

    1998-01-01

    Linked data from the Crash Outcome Data Evaluation System (CODES) in seven : states was used by the National Highway Traffic Safety Administration as the : basis of a 1996 Report to Congress on the Benefits of Safety Belts and : Motorcycle Helmets (D...

  1. Novel approach to the Helmholtz integral equation solution by Fourier series expansion for acoustic radiation and scattering problems

    CSIR Research Space (South Africa)

    Shatalov, MY

    2006-01-01

    Full Text Available -scale structure to guarantee the numerical accuracy of solution. In the present paper the authors propose to use a novel method of solution of the Helmholtz integral equation, which is based on expansion of the integrands in double Fourier series. The main...

  2. Additional helmet and pack loading reduce situational awareness during the establishment of marksmanship posture.

    Science.gov (United States)

    Lim, Jongil; Palmer, Christopher J; Busa, Michael A; Amado, Avelino; Rosado, Luis D; Ducharme, Scott W; Simon, Darnell; Van Emmerik, Richard E A

    2017-06-01

    The pickup of visual information is critical for controlling movement and maintaining situational awareness in dangerous situations. Altered coordination while wearing protective equipment may impact the likelihood of injury or death. This investigation examined the consequences of load magnitude and distribution on situational awareness, segmental coordination and head gaze in several protective equipment ensembles. Twelve soldiers stepped down onto force plates and were instructed to quickly and accurately identify visual information while establishing marksmanship posture in protective equipment. Time to discriminate visual information was extended when additional pack and helmet loads were added, with the small increase in helmet load having the largest effect. Greater head-leading and in-phase trunk-head coordination were found with lighter pack loads, while trunk-leading coordination increased and head gaze dynamics were more disrupted in heavier pack loads. Additional armour load in the vest had no consequences for Time to discriminate, coordination or head dynamics. This suggests that the addition of head borne load be carefully considered when integrating new technology and that up-armouring does not necessarily have negative consequences for marksmanship performance. Practitioner Summary: Understanding the trade-space between protection and reductions in task performance continue to challenge those developing personal protective equipment. These methods provide an approach that can help optimise equipment design and loading techniques by quantifying changes in task performance and the emergent coordination dynamics that underlie that performance.

  3. Associations between drug use and motorcycle helmet use in fatal crashes.

    Science.gov (United States)

    Rossheim, Matthew E; Wilson, Fernando; Suzuki, Sumihiro; Rodriguez, Mayra; Walters, Scott; Thombs, Dennis L

    2014-01-01

    Helmet use reduces mortality risk for motorcyclists, regardless of drug and alcohol use. However, the association between drug use and motorcycle helmet utilization is not well known. This study examines the relationship between drug use and motorcycle helmet use among fatally injured motorcycle riders. Using data from the 2005-2009 Fatality Analysis Reporting System (FARS), we examined the association between drug use and motorcycle helmet use in a multivariable logistic regression analysis of 9861 fatally injured motorcycle riders in the United States. For fatally injured motorcycle riders, use of alcohol, marijuana, or other drugs was associated with increased odds of not wearing a motorcycle helmet, controlling for the effects of state motorcycle helmet laws and other confounding variables. Predicted probabilities indicate that helmet use substantially decreases among fatally injured riders mixing alcohol with marijuana and other drugs. Furthermore, the likelihood of helmet use between marijuana-only users and other drug users is virtually the same across all blood alcohol content (BAC) levels. This study provides evidence that alcohol, marijuana, and other drug use is associated with not wearing a motorcycle helmet in fatal motorcycle crashes. There is a clear need for additional prevention and intervention efforts that seek to change helmet and drug use norms among motorcycle riders.

  4. Tests with an integrated helmet system for the TIGER helicopter

    Science.gov (United States)

    Boehm, Hans-Dieter V.; Evers, Carl; Stenner, K.-H.

    1998-08-01

    The TIGER helicopter is under development by the MODs of France and Germany for their armies. The initial German requirement was for anti-tank missions only. This task has been extended to support missions which resulted in an upgrade to the German 'UH-TIGER' variant. German MOD is planning to procure 212 UH-TIGER helicopters armed with TRIGAT-, HOT anti-tank missiles, STINGER air-to-air missiles, 68 mm rockets and a gun pod with a 12.7 mm gun.

  5. Phenotypic integration in a series of trophic traits: tracing the evolution of myrmecophagy in spiders (Araneae).

    Science.gov (United States)

    Pekár, Stano; Michalko, Radek; Korenko, Stanislav; Sedo, Ondřej; Líznarová, Eva; Sentenská, Lenka; Zdráhal, Zbyněk

    2013-02-01

    Several hypotheses have been put forward to explain the evolution of prey specificity (stenophagy). Yet little light has so far been shed on the process of evolution of stenophagy in carnivorous predators. We performed a detailed analysis of a variety of trophic adaptations in one species. Our aim was to determine whether a specific form of stenophagy, myrmecophagy, has evolved from euryphagy via parallel changes in several traits from pre-existing characters. For that purpose, we studied the trophic niche and morphological, behavioural, venomic and physiological adaptations in a euryphagous spider, Selamia reticulata. It is a species that is branching off earlier in phylogeny than stenophagous ant-eating spiders of the genus Zodarion (both Zodariidae). The natural diet was wide and included ants. Laboratory feeding trials revealed versatile prey capture strategies that are effective on ants and other prey types. The performance of spiders on two different diets - ants only and mixed insects - failed to reveal differences in most fitness components (survival and developmental rate). However, the weight increase was significantly higher in spiders on the mixed diet. As a result, females on a mixed diet had higher fecundity and oviposited earlier. No differences were found in incubation period, hatching success or spiderling size. S. reticulata possesses a more diverse venom composition than Zodarion. Its venom is more effective for the immobilisation of beetle larvae than of ants. Comparative analysis of morphological traits related to myrmecophagy in the family Zodariidae revealed that their apomorphic states appeared gradually along the phylogeny to derived prey-specialised genera. Our results suggest that myrmecophagy has evolved gradually from the ancestral euryphagous strategy by integrating a series of trophic traits. Copyright © 2012 Elsevier GmbH. All rights reserved.

  6. Children should wear helmets while ice-skating: a comparison of skating-related injuries.

    Science.gov (United States)

    McGeehan, Jennifer; Shields, Brenda J; Smith, Gary A

    2004-07-01

    This study compares injuries, especially head injuries, among ice-skaters with those among skateboarders, rollerskaters, and in-line skaters, to determine the need for helmet use during recreational ice-skating by children. A comparative study of a consecutive series of patients. The emergency department of a large, urban, academic, children's hospital. Children treated for injuries related to recreational ice-skating, skateboarding, rollerskating, and in-line skating. During a 31-month period, 419 consecutive children were evaluated in the emergency department for skating-related injuries. Children were predominantly male (53.9%), with a mean age of 10.0 years (SD: 3.0 years; median: 10.0 years; range: 1-18 years). The most frequent mechanism of injury was a fall. Overall, 76.5% of children (215 of 281 children) were reported to be wearing no protective equipment, such as a helmet or padding on the elbows or knees, at the time of injury. Ice-skaters were more likely to have adult supervision than were skateboarders (relative risk [RR]: 5.16; 95% confidence interval [CI]: 2.13-12.46), rollerskaters (RR: 1.21; 95% CI: 1.09-1.35), and in-line skaters (RR: 2.08; 95% CI: 1.72-2.51). Ice-skaters were at greater risk of injury to the head (20.0%) than were in-line skaters (4.9%) (RR: 4.09; 95% CI: 1.81-9.23); a weak difference was noted between ice-skaters and rollerskaters (9.9%) (RR: 2.18; 95% CI: 1.04-4.57), with no significant difference in head injuries between ice-skaters and skateboarders (15.9%) (RR: 1.60; 95% CI: 0.54-2.93). Ice-skaters demonstrated lacerations to the head in 68.8% of abnormal head examinations, compared with 37.0% for rollerskaters (RR: 1.86; 95% CI: 1.08-3.20) and 50.0% for in-line skaters (RR: 2.06; 95% CI: 1.35-3.16); however, there was no significant difference in lacerations to the head between ice-skaters and skateboarders (53.3%) (RR: 1.29; 95% CI: 0.76-2.19). Injuries to ice-skaters occurred more often in an indoor skating facility (92

  7. A Unified Method of Finding Laplace Transforms, Fourier Transforms, and Fourier Series. [and] An Inversion Method for Laplace Transforms, Fourier Transforms, and Fourier Series. Integral Transforms and Series Expansions. Modules and Monographs in Undergraduate Mathematics and Its Applications Project. UMAP Units 324 and 325.

    Science.gov (United States)

    Grimm, C. A.

    This document contains two units that examine integral transforms and series expansions. In the first module, the user is expected to learn how to use the unified method presented to obtain Laplace transforms, Fourier transforms, complex Fourier series, real Fourier series, and half-range sine series for given piecewise continuous functions. In…

  8. Camouflage design and head measurement characteristic of Indonesian armoured vehicle helmet

    Science.gov (United States)

    Sya'bana, Yukhi Mustaqim Kusuma; Sanjaya, K. H.

    2017-01-01

    In this paper discussed camouflage design helmet for armored vehicles with comparing head measurement of Indonesian anthropometric. Design process conduct with considering of design aspects involves function, materials, operational, technology, user, and appearance (camouflage). As an application of Indonesian National Army that qualifies factors needs: safety, comfort, practical and service. MIL-H-44099A Military Specification: Helmet, Ground Troops And Parachutists is minimum limitation standard of military helmet production. Head measurement for product design process guide is presented. Model simulation and helmet measurement using the design for ego and design for more types ergonomics concept. Appearance shape concept is engaging camouflage towards background and environment to deceive enemy viewpoint. Helmet prototype has tested ergonomically to an Indonesian National Army soldier and stated that the helmet size is a comfort and fitted on the head when in use.

  9. Sir Hugh Cairns: The neurosurgeon who introduced crash helmets

    Directory of Open Access Journals (Sweden)

    Shahsivadhanan Sundaravadhanan

    2017-01-01

    Full Text Available Statistics prove that more Indians die in Road traffic related accidents than in wars. Prior to World War II, the death toll across the world used to be very high. It was at this juncture that a Military Neurosurgeon named Hugh Cairns introduced the compulsory wearing of crash helmets and brought about a reduction in mortality by more than 50%. Within a decade of introduction of crash helmets in Britain, the entire world followed suit. The results of his efforts are here for all of us to see. This innovative military neurosurgeon is credited as the one who introduced the concept of mobile neurosurgical units during world war and also the first proponent of usage of penicillin in war. His concepts in war surgery are still followed by militaries across the world. This article comes as a tribute to this great Neurosurgeon who helped in saving millions of lives.

  10. [Comfort and noise level in infants with helmet interface].

    Science.gov (United States)

    Medina, A; Alvarez Fernández, P; Rey Galán, C; Álvarez Mendiola, P; Álvarez Blanco, S; Vivanco Allende, A

    2015-10-01

    To evaluate comfort and noise intensity using the COMFORT scale in infants who receive respiratory support with a helmet interface. An observational descriptive study was conducted on all infants (1 to 12 months of age) admitted to a PICU from November 1st 2013 to March 31st 2014 and who received non-invasive ventilation with a helmet interface. Tolerance to the interface was assessed by use of the COMFORT scale. The intensity of the noise to which the infants were exposed was measured with a TES1350A HIBOK 412 sound-level meter. Three measurements were made every day. Twenty seven patients with bronchiolitis (median age: 54 days; range: 10 to 256) were included. Median COMFORT score in the first day was 21 points (14 - 28). An increase in patient comfort was found with a gradual decrease in the scores, with a maximum reduction of 22% from the first hours (score of 22) to the fifth day (score of 18). The minimum sound intensity registered was 42dB, and the maximum was 78dB. Background noise intensity was associated with noise intensity in the helmet. No differences were observed in COMFORT score and noise intensity between ventilator devices. Helmet interface was well tolerated by infants. COMFORT score results are an indicator that infants were comfortable or very comfortable. The measured noise intensity was in the safe range permitted by World Health Organization. Copyright © 2014 Asociación Española de Pediatría. Published by Elsevier España, S.L.U. All rights reserved.

  11. Materials and design issues for military helmets - Chapter 6

    OpenAIRE

    Hamouda, A.M.S.; Sohaimi, R.M.; Zaidi, A.M.A.; Abdullah, S.

    2012-01-01

    Abstract: As weaponry technology has advanced, the ballistic threat to humans has increased significantly. As well as the military, civilians who are exposed to these threats as part of their everyday work require adequate protective equipment. This increasing demand for body armour and ballistic helmets is driving the protective equipment industry to create lightweight, reliable protection adapted for specific applications and marketable to a wide range of consumers. This chapter focuses on ...

  12. The influence of ski helmets on sound perception and sound localisation on the ski slope

    Directory of Open Access Journals (Sweden)

    Lana Ružić

    2015-04-01

    Full Text Available Objectives: The aim of the study was to investigate whether a ski helmet interferes with the sound localization and the time of sound perception in the frontal plane. Material and Methods: Twenty-three participants (age 30.7±10.2 were tested on the slope in 2 conditions, with and without wearing the ski helmet, by 6 different spatially distributed sound stimuli per each condition. Each of the subjects had to react when hearing the sound as soon as possible and to signalize the correct side of the sound arrival. Results: The results showed a significant difference in the ability to localize the specific ski sounds; 72.5±15.6% of correct answers without a helmet vs. 61.3±16.2% with a helmet (p < 0.01. However, the performance on this test did not depend on whether they were used to wearing a helmet (p = 0.89. In identifying the timing, at which the sound was firstly perceived, the results were also in favor of the subjects not wearing a helmet. The subjects reported hearing the ski sound clues at 73.4±5.56 m without a helmet vs. 60.29±6.34 m with a helmet (p < 0.001. In that case the results did depend on previously used helmets (p < 0.05, meaning that that regular usage of helmets might help to diminish the attenuation of the sound identification that occurs because of the helmets. Conclusions: Ski helmets might limit the ability of a skier to localize the direction of the sounds of danger and might interfere with the moment, in which the sound is firstly heard.

  13. A Network for Integrated Science and Mathematics Teaching and Learning. NCSTL Monograph Series, #2.

    Science.gov (United States)

    Berlin, Donna F.; White, Arthur L.

    This monograph presents a summary of the results of the Wingspread Conference in April, 1991 concerning the viability and future of the concept of integration of mathematics and science teaching and learning. The conference focused on three critical issues: (1) development of definitions of integration and a rationale for integrated teaching and…

  14. Laminated helmet materials characterization by terahertz kinetics spectroscopy

    Science.gov (United States)

    Rahman, Anis; Rahman, Aunik K.

    2015-05-01

    High speed acquisition of reflected terahertz energy constitutes a kinetics spectrum that is an effective tool for layered materials' deformation characterization under ballistic impact. Here we describe utilizing the kinetics spectrum for quantifying a deformation event due to impact in material used for Soldier's helmet. The same technique may be utilized for real-time assessment of trauma by measuring the helmet wore by athletes. The deformation of a laminated material (e.g., a helmet) is dependent on the nature of impact and projectile; thus can uniquely characterize the impact condition leading to a diagnostic procedure based on the energy received by an athlete during an impact. We outline the calibration process for a given material under ballistic impact and then utilize the calibration for extracting physical parameters from the measured kinetics spectrum. Measured kinetics spectra are used to outline the method and rationale for extending the concept to a diagnosis tool. In particular, captured kinetics spectra from multilayered plates subjected to ballistic hit under experimental conditions by high speed digital acquisition system. An algorithm was devised to extract deformation and deformation velocity from which the energy received on the skull was estimated via laws of nonrelativistic motion. This energy is assumed to be related to actual injury conditions, thus forming a basis for determining whether the hit would cause concussion, trauma, or stigma. Such quantification may be used for diagnosing a Soldier's trauma condition in the field or that of an athlete's.

  15. Capabilities of Helmets for Preventing Head Injuries Induced by Ballistic Impacts

    Directory of Open Access Journals (Sweden)

    D.V. Balandin

    2004-01-01

    Full Text Available The limiting performance of ballistically loaded helmets designed to reduce head injuries is studied analytically. The projectile does not penetrate the helmet. This analysis evaluates the absolute minimum of the peak displacement of the helmet shell relative to the head, provided that criteria measuring the severity of head injuries lie within prescribed limits. Rather than optimize a specific design configuration, e.g. a viscoelastic foam liner, characteristics of a time-dependent force representing the helmet liner are calculated. The formulation reduces the limiting performance analysis to an optimal control problem.

  16. Does listening to music with an audio ski helmet impair reaction time to peripheral stimuli?

    Science.gov (United States)

    Ruedl, G; Pocecco, E; Wolf, M; Schöpf, S; Burtscher, M; Kopp, M

    2012-12-01

    With the recent worldwide increase in ski helmet use, new market trends are developing, including audio helmets for listening to music while skiing or snowboarding. The aim of this study was to evaluate whether listening to music with an audio ski helmet impairs reaction time to peripheral stimuli. A within-subjects design study using the Compensatory-Tracking-Test was performed on 65 subjects (36 males and 29 females) who had a mean age of 23.3 ± 3.9 years. Using repeated measures analysis of variance, we found significant differences in reaction times between the 4 test conditions (p=0.039). The lowest mean reaction time (± SE) was measured for helmet use while listening to music (507.9 ± 13.2 ms), which was not different from helmet use alone (514.6 ± 12.5 ms) (p=0.528). However, compared to helmet use while listening to music, reaction time was significantly longer for helmet and ski goggles used together (535.8 ± 14.2 ms, p=0.005), with a similar trend for helmet and ski goggles used together while listening to music (526.9 ± 13.8 ms) (p=0.094). In conclusion, listening to music with an audio ski helmet did not increase mean reaction time to peripheral stimuli in a laboratory setting. © Georg Thieme Verlag KG Stuttgart · New York.

  17. Factors Influencing Helmet Use, Head Injury, and Hospitalization Among Children Involved in Skateboarding and Snowboarding Accidents.

    Science.gov (United States)

    Sadeghian, Homa; Nguyen, Brian; Huynh, Nhan; Rouch, Joshua; Lee, Steven L; Bazargan-Hejazi, Shahrzad

    2017-01-01

    Up to 75% of skateboarders and snowboarders admitted to the hospital sustain head injuries. It is unclear why not all children and teenagers wear helmets while snowboarding and skateboarding given the protection they afford. To report on the prevalence of, and factors associated with, skateboarding and snowboarding in injured children and to explore factors that influence helmet use, head injury, and hospitalization in this sample. A cross-sectional study of skateboard- and snowboard-associated injuries from 2003 to 2012 among individuals younger than age 18 years using National Electronic Injury Surveillance System (NEISS) data from approximately 100 hospitals. Helmet use, head injury, and hospitalization. Of 1742 patients in the study, 852 (48.9%) and 890 (51.1%) were skateboarders and snowboarders, respectively. Overall, 907 (52.1%) did not use helmets, and 704 (40.4%) sustained head injuries. Multiple logistic regression analysis showed that age, race/ethnicity, location of boarding, and engaging in skateboarding influenced helmet use. Sex, race/ethnicity, helmet use, and skateboarding predicted head injury. Age, sex, skateboarding, and head injury predicted hospital admission. Statistically significant differences exist in helmet use, head injury, and hospitalization rates between skateboarders and snowboarders. Our findings suggest that injury prevention and outreach programs are needed to increase helmet use and reduce the risk of head injury and hospitalization in skateboarders and other at-risk groups. Further studies are needed to clarify the association between race/ethnicity and helmet use among skateboarders and snowboarders.

  18. Neck muscle strain when wearing helmet and NVG during acceleration on a trampoline.

    Science.gov (United States)

    Sovelius, Roope; Oksa, Juha; Rintala, Harri; Huhtala, Heini; Siitonen, Simo

    2008-02-01

    The helmet-mounted equipment worn by military pilots increases the weight of the helmet system and shifts its center of gravity, increasing the loads on neck structures, especially during acceleration. The aim of this study was to determine neck muscle strain with different head-loads during trampoline-induced G loads (0 to +4 G). Under three conditions [no helmet, helmet, helmet with night vision goggles (NVG)], 14 subjects performed trampoline exercises including basic, hand-and-knee, and back bouncing. EMG activity was measured for the sternocleidomastoid (SCM), cervical erector spinae (CES), trapezoid (TRA), and thoracic erector spinae (TES) muscles. Muscle strain was determined as a percentage of maximal voluntary contraction (%MVC). For the three exercises combined, the following significant changes were found: compared to control, the helmet increased muscle strain by 18%, 28%, and 18% in the SCM, CES, and TRA, respectively; NVG produced a further increase of 11% in the SCM and 6% in the CES. During back bouncing, the helmet increased muscle strain by 14% in the SCM and 19% in the CES, and NVG further increased this strain by 14% in the SCM. Hand-and-knee bouncing loaded extensors: the helmet caused increases of 46% in the CES and 29% in the TES, while NVG produced a further 13% increase in CES activation. Helmet weight alone had a large effect on muscular workload. The additional frontal weight of the NVG caused a further increase in the activity of cervical muscles that were already subjected to high strain.

  19. Amplitude-integrated Electroencephalography in Full-term Newborns without Severe Hypoxic-ischemic Encephalopathy: Case Series

    OpenAIRE

    Osredkar, Damjan; Derganc, Metka; Paro-Panjan, Darja; Neubauer, David

    2006-01-01

    Aim: To assess the diagnostic value of amplitude-integrated electroencephalography (EEG) in comparison to standard EEG in newborns without severe hypoxic-ischemic encephalopathy who were at risk for seizures. Methods: The study included a consecutive series of 18 term newborns without severe hypoxic-ischemic encephalopathy, but with clinical signs suspicious of epileptic seizures, history of loss of social contact, disturbance of muscle tone, hyperirritability, and/or jitteriness. Amplitud...

  20. Proof of the path integral representation of the nonlinear Fokker-Planck equation by means of Fourier series

    International Nuclear Information System (INIS)

    Dekker, H.

    1978-01-01

    The lagrangian for the action occurring in the path integral solution of the nonlinear Fokker-Planck equation with constant diffusion function is derived by means of a straightforward Fourier series analysis. In this manner the path between the prepoint and the postpoint in the short time propagator is not restricted a priori to the usually considered straight line. Earlier results by Graham, Stratonovich, Horsthemke and Back, and the author's are recovered and thus put on much safer ground. (Auth.)

  1. Achieving all-age helmet use compliance for snow sports: strategic use of education, legislation and enforcement.

    Science.gov (United States)

    Fenerty, Lynne; Heatley, Jennifer; Young, Julian; Thibault-Halman, Ginette; Kureshi, Nelofar; Bruce, Beth S; Walling, Simon; Clarke, David B

    2016-06-01

    Nova Scotia is the first jurisdiction in the world to mandate ski and snowboard helmet use for all ages at ski hills in the province. This study represents a longitudinal examination of the effects of social marketing, educational campaigns and the introduction of helmet legislation on all-age snow sport helmet use in Nova Scotia. A baseline observational study was conducted to establish the threshold of ski and snowboarding helmet use. Based on focus groups and interviews, a social marketing campaign was designed and implemented to address factors influencing helmet use. A prelegislation observational study assessed the effects of social marketing and educational promotion on helmet use. After all-age snow sport helmet legislation was enacted and enforced, a postlegislation observational study was conducted to determine helmet use prevalence. Baseline data revealed that 74% of skiers and snowboarders were using helmets, of which 80% were females and 70% were males. Helmet use was high in children (96%), but decreased with increasing age. Following educational and social marketing campaigns, overall helmet use increased to 90%. After helmet legislation was enacted, 100% compliance was observed at ski hills in Nova Scotia. Results from this study demonstrate that a multifaceted approach, including education, legislation and enforcement, was effective in achieving full helmet compliance among all ages of skiers and snowboarders. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  2. Economic School Integration: An Update. The Century Foundation Issue Brief Series.

    Science.gov (United States)

    Kahlenberg, Richard D.

    In 2000, an Idea Brief asserted that the best way to improve education would be to give every schoolchild the opportunity to attend a middle class public school (economic school integration). This brief reviews recent research and policy developments regarding economic school integration, noting that school segregation based on socioeconomic…

  3. The problem of the pillion rider: India's helmet law and New Delhi's exemption.

    Science.gov (United States)

    Swaroop, Mamta; Marie Siddiqui, Selma; Sagar, Sushma; Crandall, Marie L

    2014-05-01

    In India, motorized two-wheeler (MTW) road traffic accidents injure or kill 72,000 women annually. Before the Motor Vehicle Act of 1988, which required mandatory helmet use for MTW riders, a study found 0.6% of all MTW pillions (backseat passengers) were helmeted. Citing religious protests to the legislation, Delhi's high court exempted the city's 12 million women from the law. We hypothesize that currently male pillions use helmets more frequently than females, and that overall pillion helmet usage has increased over the last 20 y. Continuous video was recorded in half-hour blocks at four locations in Delhi on separate days, totaling 8 hours of high- and low-volume traffic. Videos were reviewed with at least two reviewers extracting the number of MTW pillions, as well as their gender, approximate age, and helmet usage. Of 4010 pillions identified, 63.8% were male, 32.4% female, and 3.3% children. Among males, there were significantly more helmeted pillions (88.4%, P < 0.001); among females, there were significantly more unhelmeted pillions (99.4%, P < 0.001). Among unhelmeted pillions, significantly more were female (81.4%) than male (P < 0.001). Current overall pillion helmet use is significantly higher than historical rate (P < 0.001). The significantly higher male pillion helmet usage compared with females indicates Delhi's helmet law is associated with increased compliance among those who fall under its jurisdiction. This augments the growing body of evidence that mandatory helmet laws are efficacious, thus repealing the exemption of women is an important step in increasing female pillion helmet usage. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. Integrating the Liberal Arts and Chemistry: A Series of General Chemistry Assignments to Develop Science Literacy

    Science.gov (United States)

    Miller, Diane M.; Chengelis Czegan, Demetra A.

    2016-01-01

    This paper describes assignments that have been implemented in a General Chemistry I course to promote science literacy. This course was chosen in particular because it reaches a broad audience, which includes nonscience majors. The assignment series begins with several discussions and tasks to develop information literacy, in which students find…

  5. Hybrid drives for e-bikes - E-management integration; E-management-integration. Serie Hybrid E-Fahrrad-Antrieb

    Energy Technology Data Exchange (ETDEWEB)

    Fuchs, A.

    2005-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) describes work done on a project concerning the further evaluation and improvement of the small-series hybrid drive with the final aim of developing a product. The modular drive system, which can be coupled with components of third party manufacturers, is described. The report deals with practical work done on the subject as well as studies involving investors and the user market. The main results of the project are presented including interesting results on human pedalling effort under load, gear losses and measurements made on hub-motors. Components and energy balances are dealt with. Problems still to be addressed and further work to be done are listed.

  6. A Spatial Data Infrastructure Integrating Multisource Heterogeneous Geospatial Data and Time Series: A Study Case in Agriculture

    Directory of Open Access Journals (Sweden)

    Gloria Bordogna

    2016-05-01

    Full Text Available Currently, the best practice to support land planning calls for the development of Spatial Data Infrastructures (SDI capable of integrating both geospatial datasets and time series information from multiple sources, e.g., multitemporal satellite data and Volunteered Geographic Information (VGI. This paper describes an original OGC standard interoperable SDI architecture and a geospatial data and metadata workflow for creating and managing multisource heterogeneous geospatial datasets and time series, and discusses it in the framework of the Space4Agri project study case developed to support the agricultural sector in Lombardy region, Northern Italy. The main novel contributions go beyond the application domain for which the SDI has been developed and are the following: the ingestion within an a-centric SDI, potentially distributed in several nodes on the Internet to support scalability, of products derived by processing remote sensing images, authoritative data, georeferenced in-situ measurements and voluntary information (VGI created by farmers and agronomists using an original Smart App; the workflow automation for publishing sets and time series of heterogeneous multisource geospatial data and relative web services; and, finally, the project geoportal, that can ease the analysis of the geospatial datasets and time series by providing complex intelligent spatio-temporal query and answering facilities.

  7. Characteristics of helmet or knit cap use in head injury of snowboarders.

    Science.gov (United States)

    Fukuda, Osamu; Hirashima, Yutaka; Origasa, Hideki; Endo, Shunro

    2007-11-01

    The rate of head injury is 1.86-6 times higher for snowboarding than for skiing. Detailed data about the usefulness of a helmet or knit cap for protecting against serious head injuries have not been reported. The present study evaluated the use of a helmet or knit cap for preventing head injuries. Questionnaire data were collected from 1,190 consecutive patients in a hospital during the 1999/2000-2002/2003 winter seasons at Uonuma ski resort, Niigata, Japan. Patients were divided into the helmet, knit cap, and no cap groups. Upper technical level was highest and jumping as the cause of injury was most frequent in the helmet group. After adjustment for other confounders, there was a significant negative association between the occurrence of serious head injury during snowboarding and female sex (adjusted odds ratio 0.55, 95% confidence interval 0.421-0.718, p jumping (adjusted odds ratio 2.25, 95% confidence interval 1.48-3.43, p = 0.0001). Among snowboarding maneuvers, only jumping showed a significant negative association between wearing of a helmet or knit cap and the occurrence of serious head injury (p = 0.036). Snowboarders who wear helmets might attempt dangerous maneuvers causing injuries. Wearing of a helmet or knit cap protected against serious head injuries on jumping. Every snowboarder should wear a helmet or knit cap on jumping to prevent head injury.

  8. In defence of mandatory bicycle helmet legislation: response to Hooper and Spicer.

    Science.gov (United States)

    Biegler, Paul; Johnson, Marilyn

    2015-08-01

    We invoke a triple rationale to rebut Hooper and Spicer's argument against mandatory helmet laws. First, we use the laws of physics and empirical studies to show how bicycle helmets afford substantial protection to the user. We show that Hooper and Spicer erroneously downplay helmet utility and that, as a result, their attack on the utilitarian argument for mandatory helmet laws is weakened. Next, we refute their claim that helmet legislation comprises unjustified paternalism. We show the healthcare costs of bareheaded riding to pose significant third party harms. It follows, we argue, that a utilitarian case for helmet laws can be sustained by appeal to Mill's Harm Principle. Finally, we reject Hooper and Spicer's claim that helmet laws unjustly penalise cyclists for their own health-affecting behaviour. Rather, we show their argument to suffer by disanalogy with medical cases where injustice may be more evident, for example, denial of bypass surgery to smokers. We conclude that mandatory helmet laws offer substantial utility and are entirely defensible within the framework of a liberal democracy. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  9. Inadequate Helmet Fit Increases Concussion Severity in American High School Football Players.

    Science.gov (United States)

    Greenhill, Dustin A; Navo, Paul; Zhao, Huaqing; Torg, Joseph; Comstock, R Dawn; Boden, Barry P

    2016-05-01

    There is limited information on the relationship between football helmet fit and concussion severity. Poor helmet fit may predispose football players to a more severe concussion. Descriptive epidemiology study. Level 3. Data from concussion injury reports were obtained from the National High School Sports-Related Injury Surveillance System over a 9-year period. Symptoms, duration, and helmet parameters (fit, interior padding) were analyzed for all first-time concussions. Data from 4580 concussions were analyzed. Patients who suffered concussions with a helmet that did not fit properly (3.22%), as determined by an athletic trainer, had higher rates of drowsiness (RR, 1.46; P = 0.005), hyperexcitability (RR, 2.38; P = 0.047), and sensitivity to noise (RR, 1.88; P football helmet is a risk factor for a concussion with more symptoms and of longer duration. Concussions of longer duration are also more common in players with an air bladder-lined helmet. Current high school football rules should mandate supervision and maintenance of helmet fit throughout the season, prior to impact. Team physicians, athletic trainers, coaches, and high school officials should ensure proper oversight of helmet fit in high school athletes to decrease concussion severity and duration. © 2016 The Author(s).

  10. The Theory of Planned Behavior and Helmet Use among College Students

    Science.gov (United States)

    Ross, Lisa Thomson; Ross, Thomas P.; Farber, Sarah; Davidson, Caroline; Trevino, Meredith; Hawkins, Ashley

    2011-01-01

    Objectives: To assess undergraduate helmet use attitudes and behaviors in accordance with the theory of planned behavior (TPB). We predicted helmet wearers and nonwearers would differ on our subscales. Methods: Participants (N = 414, 69% female, 84% white) completed a survey. Results: Principal component analysis and reliability analysis guided…

  11. Viet Nam’s mandatory motorcycle helmet law and its impact on children

    Science.gov (United States)

    Pervin, Aaron; Sidik, Mirjam; McKinley, Tyler; Tu, Nguyen Thi Hong; Nam, Nguyen Phuong

    2009-01-01

    Abstract Objective To measure the use of motorcycle helmets in children and to determine the reasons why children wear helmets less often than adults. Methods The frequency of helmet wearing among adults and children was ascertained by trained roadside observers, and randomized road user surveys were completed in four major centres in Viet Nam: Hanoi, Ho Chi Minh City, Can Tho and Da Nang. Survey data on key questions were cross tabulated, and χ² was calculated for significant differences between parents and non-parents (0.05). Findings The frequency of helmet use in the four study locations ranged from 90–99% among adults, from 15–53% among children ≤ 7 years of age, and from 38–53% among children > 7 but ≤ 14. Of the parents surveyed, 67% said the fear of neck injury was the most important reason their children did not wear a helmet. Conclusion Children wear motorcycle helmets much less often than adults. Legislation to penalize adults whose children do not wear motorcycle helmets has been proposed in Viet Nam. Furthermore, ongoing advocacy and social marketing efforts are being made to disseminate information about the safety benefits of helmets to combat erroneous public perceptions. PMID:19551255

  12. Aircrew helmet design and manufacturing enhancements through the use of advanced technologies

    Science.gov (United States)

    Cadogan, David P.; George, Alan E.; Winkler, Edward R.

    1993-12-01

    With the development of helmet mounted displays (HMD) and night vision systems (NVS) for use in military and civil aviation roles, new methods of helmet development need to be explored. The helmet must be designed to provide the user with the most lightweight, form fitting system, while meeting other system performance requirements. This can be achieved through a complete analysis of the system requirements. One such technique for systems analysis, a quality function deployment (QFD) matrix, is explored for this purpose. The advanced helmet development process for developing aircrew helmets includes the utilization of several emerging technologies such as laser scanning, computer aided design (CAD), computer generated patterns from 3-D surfaces, laser cutting of patterns and components, and rapid prototyping (stereolithography). Advanced anthropometry methods for helmet development are also available for use. Besides the application of advanced technologies to be used in the development of helmet assemblies, methods of mass reduction are also discussed. The use of these advanced technologies will minimize errors in the development cycle of the helmet and molds, and should enhance system performance while reducing development time and cost.

  13. Psychological models for development of motorcycle helmet use among students in Vietnam

    Science.gov (United States)

    Kumphong, J.; Satiennam, T.; Satiennam, W.; Trinh, Tu Anh

    2018-04-01

    A helmet can reduce head accident severity. The aim of this research study was to study the intention for helmet use of students who ride motorcycles in Vietnam, by Structural Equation Modeling (SEM). Questionnaires developed by several traffic psychology modules, including the Theory of Planned Behaviour (TPB), Traffic Locus of Control (T-LOC), and Health Belief Model (HBM), were distributed to students at Ton Thang University and University of Architecture, Ho Chi Minh City. SEM was used to explain helmet use behaviour. The results indicate that TPB, T-LOC and HBM could explain the variance in helmet use behaviour. However, TPB can explain behaviour (helmet use intention) better than T-LOC and HBM. The outcome of this study is useful for the agencies responsible to improve motorcycle safety.

  14. Long-term use of neonatal helmet-CPAP: a case report.

    Science.gov (United States)

    Doglioni, N; Micaglio, M; Zanardo, V; Trevisanuto, D

    2009-12-01

    In a recent short-term physiological study, we demonstrated a new continuous positive airway pressure (CPAP) system (neonatal helmet-CPAP) that could be a feasible device for managing preterm infants needing continuous distending pressure with better tolerability than nasal-CPAP. However, its application for a long-term period has never been reported in neonates. Here, we describe the use of neonatal helmet-CPAP in a neonate with persistent pulmonary hypertension of the newborn. Twenty minutes after neonatal helmet-CPAP placement, the baseline post-ductal tcSaO2 (66%) and alveolar-arterial gradient O2 improved from 66% and 648 mmHg to 100% and 465 mmHg, respectively. The neonatal helmet-CPAP was applied for 48 hours and was well-tolerated by the patient without complications. Long-term use of neonatal helmet-CPAP appears feasible and well-tolerated. Comparative trials are needed.

  15. Paternalism & Its Discontents: Motorcycle Helmet Laws, Libertarian Values, and Public Health

    Science.gov (United States)

    Jones, Marian Moser; Bayer, Ronald

    2007-01-01

    The history of motorcycle helmet legislation in the United States reflects the extent to which concerns about individual liberties have shaped the public health debate. Despite overwhelming epidemiological evidence that motorcycle helmet laws reduce fatalities and serious injuries, only 20 states currently require all riders to wear helmets. During the past 3 decades, federal government efforts to push states toward enactment of universal helmet laws have faltered, and motorcyclists’ advocacy groups have been successful at repealing state helmet laws. This history raises questions about the possibilities for articulating an ethics of public health that would call upon government to protect citizens from their own choices that result in needless morbidity and suffering. PMID:17194856

  16. Cognitive considerations for helmet-mounted display design

    Science.gov (United States)

    Francis, Gregory; Rash, Clarence E.

    2010-04-01

    Helmet-mounted displays (HMDs) are designed as a tool to increase performance. To achieve this, there must be an accurate transfer of information from the HMD to the user. Ideally, an HMD would be designed to accommodate the abilities and limitations of users' cognitive processes. It is not enough for the information (whether visual, auditory, or tactual) to be displayed; the information must be perceived, attended, remembered, and organized in a way that guides appropriate decision-making, judgment, and action. Following a general overview, specific subtopics of cognition, including perception, attention, memory, knowledge, decision-making, and problem solving are explored within the context of HMDs.

  17. Social and Occupational Integration of Disadvantaged People. Leonardo da Vinci Good Practices Series.

    Science.gov (United States)

    Commission of the European Communities, Brussels (Belgium). Directorate-General for Education and Culture.

    This document profiles nine European programs that exemplify good practice in social and occupational integration of disadvantaged people. The programs profiled are as follows: (1) Restaurant Venezia (a CD-ROM program to improve the reading and writing skills of young people in Luxembourg who have learning difficulties); (2) an integrated…

  18. Rates of motorcycle helmet use and reasons for non-use among adults and children in Luang Prabang, Lao People's Democratic Republic.

    Science.gov (United States)

    Fong, Michelle C; Measelle, Jeffrey R; Dwyer, Jessica L; Taylor, Yvonne K; Mobasser, Arian; Strong, Theresa M; Werner, Susanne; Ouansavanh, Siamphone; Mounmingkham, Amphone; Kasuavang, Mai; Sittiphone, Dalika; Phoumesy, Khamhak; Sysaythong, Keo; Khantysavath, Khauphan; Bounnaphone, Somchit; Vilaysom, Amphone; Touvachao, Sengchanh; Mounmeuangxam, Siviengxam; Souralay, Somchittana; Lianosay, Baoher; Lia, Thongher; Spector, Jonathan M

    2015-09-28

    Motorcycles make up 81 % of the total vehicle population and 74 % of road traffic deaths in Lao PDR. Helmets reduce the risk and severity of injuries resulting from motorcycle accidents by 72 %. Although Lao law mandates motorcycle helmet use among drivers and passengers, the prevalence of helmet use in Luang Prabang, Lao PDR is unknown. This project aimed to measure the prevalence of motorcycle helmet use among riders (i.e., drivers and passengers) in Luang Prabang. An observational survey in Luang Prabang was conducted in February 2015 to measure the prevalence of motorcycle helmet use among drivers and passengers. Additionally, non-helmet wearing riders were surveyed to identify the reasons for helmet non-use. Of 1632 motorcycle riders observed, only 16.2 % wore helmets. Approximately 29 % of adults wore helmets while less than 1 % of all children wore helmets. When surveyed about attitudes towards helmet use, the majority of adult drivers indicated that they did not like how adult helmets feel or made them look. Additionally, almost half of motorcyclists who did not own child helmets reported that their child was too young to wear a helmet. Our finding that children wear helmets at significantly lower rates compared to adults is consistent with findings from neighboring countries in Southeast Asia. Results of this study have implications for public health campaigns targeting helmet use, especially among children.

  19. Integrated load distribution and production planning in series-parallel multi-state systems with failure rate depending on load

    International Nuclear Information System (INIS)

    Nourelfath, Mustapha; Yalaoui, Farouk

    2012-01-01

    A production system containing a set of machines (also called components) arranged according to a series-parallel configuration is addressed. A set of products must be produced in lots on this production system during a specified finite planning horizon. This paper presents a method for integrating load distribution decisions, and tactical production planning considering the costs of capacity change and the costs of unused capacity. The objective is to minimize the sum of capacity change costs, unused capacity costs, setup costs, holding costs, backorder costs, and production costs. The main constraints consist in satisfying the demand for all products over the entire horizon, and in not exceeding available repair resource. The production series-parallel system is modeled as a multi-state system with binary-state components. The proposed model takes into account the dependence of machines' failure rates on their load. Universal generating function technique can be used in the optimization algorithm for evaluating the expected system production rate in each period. We show how the formulated problem can be solved by comparing the results of several multi-product lot-sizing problems with capacity associated costs. The importance of integrating load distribution decisions and production planning is illustrated through numerical examples.

  20. Motorcycle helmet use and the risk of head, neck, and fatal injury: Revisiting the Hurt Study.

    Science.gov (United States)

    Rice, Thomas M; Troszak, Lara; Ouellet, James V; Erhardt, Taryn; Smith, Gordon S; Tsai, Bor-Wen

    2016-06-01

    Most studies find strong evidence that motorcycle helmets protect against injury, but a small number of controversial studies have reported a positive association between helmet use and neck injury. The most commonly cited paper is that of Goldstein (1986). Goldstein obtained and reanalyzed data from the Hurt Study, a prospective, on-scene investigation of 900 motorcycle collisions in the city of Los Angeles. The Goldstein results have been adopted by the anti-helmet community to justify resistance to compulsory motorcycle helmet use on the grounds that helmets may cause neck injuries due to their mass. In the current study, we replicated Goldstein's models to understand how he obtained his unexpected results, and we then applied modern statistical methods to estimate the association of motorcycle helmet use with head injury, fatal injury, and neck injury among collision-involved motorcyclists. We found Goldstein's analysis to be critically flawed due to improper data imputation, modeling of extremely sparse data, and misinterpretation of model coefficients. Our new analysis showed that motorcycle helmets were associated with markedly lower risk of head injury (RR 0.40, 95% CI 0.31-0.52) and fatal injury (RR 0.44, 95% CI 0.26-0.74) and with moderately lower but statistically significant risk of neck injury (RR 0.63, 95% CI 0.40-0.99), after controlling for multiple potential confounders. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Comparative Outcomes of Traumatic Brain Injury from Biking Accidents With or Without Helmet Use.

    Science.gov (United States)

    Dagher, Jehane H; Costa, Camille; Lamoureux, Julie; de Guise, Elaine; Feyz, Mitra

    2016-01-01

    To determine if health outcomes and demographics differ according to helmet status between persons with cycling-related traumatic brain injuries (TBI). This is a retrospective study of 128 patients admitted to the Montreal General Hospital following a TBI that occurred while cycling from 2007-2011. Information was collected from the Quebec trauma registry and the coroner's office in cases of death from cycling accidents. The independent variables collected were socio-demographic, helmet status, clinical and neurological patient information. The dependent variables evaluated were length of stay (LOS), extended Glasgow outcome scale (GOS-E), injury severity scale (ISS), discharge destination and death. 25% of cyclists wore a helmet. The helmet group was older, more likely to be university educated, married and retired. Unemployment, longer intensive care unit (ICU) stay, severe intracranial bleeding and neurosurgical interventions were more common in the no helmet group. There was no significant association between the severity of the TBI, ISS scores, GOS-E or death and helmet wearing. The median age of the subjects who died was higher than those who survived. Cyclists without helmets were younger, less educated, single and unemployed. They had more severe TBIs on imaging, longer LOS in ICU and more neurosurgical interventions. Elderly cyclists admitted to the hospital appear to be at higher risk of dying in the event of a TBI.

  2. Dynamic Response and Residual Helmet Liner Crush Using Cadaver Heads and Standard Headforms.

    Science.gov (United States)

    Bonin, S J; Luck, J F; Bass, C R; Gardiner, J C; Onar-Thomas, A; Asfour, S S; Siegmund, G P

    2017-03-01

    Biomechanical headforms are used for helmet certification testing and reconstructing helmeted head impacts; however, their biofidelity and direct applicability to human head and helmet responses remain unclear. Dynamic responses of cadaver heads and three headforms and residual foam liner deformations were compared during motorcycle helmet impacts. Instrumented, helmeted heads/headforms were dropped onto the forehead region against an instrumented flat anvil at 75, 150, and 195 J. Helmets were CT scanned to quantify maximum liner crush depth and crush volume. General linear models were used to quantify the effect of head type and impact energy on linear acceleration, head injury criterion (HIC), force, maximum liner crush depth, and liner crush volume and regression models were used to quantify the relationship between acceleration and both maximum crush depth and crush volume. The cadaver heads generated larger peak accelerations than all three headforms, larger HICs than the International Organization for Standardization (ISO), larger forces than the Hybrid III and ISO, larger maximum crush depth than the ISO, and larger crush volumes than the DOT. These significant differences between the cadaver heads and headforms need to be accounted for when attempting to estimate an impact exposure using a helmet's residual crush depth or volume.

  3. The evaluation of speed skating helmet performance through peak linear and rotational accelerations.

    Science.gov (United States)

    Karton, Clara; Rousseau, Philippe; Vassilyadi, Michael; Hoshizaki, Thomas Blaine

    2014-01-01

    Like many sports involving high speeds and body contact, head injuries are a concern for short track speed skating athletes and coaches. While the mandatory use of helmets has managed to nearly eliminate catastrophic head injuries such as skull fractures and cerebral haemorrhages, they may not be as effective at reducing the risk of a concussion. The purpose of this study was to evaluate the performance characteristics of speed skating helmets with respect to managing peak linear and peak rotational acceleration, and to compare their performance against other types of helmets commonly worn within the speed skating sport. Commercially available speed skating, bicycle and ice hockey helmets were evaluated using a three-impact condition test protocol at an impact velocity of 4 m/s. Two speed skating helmet models yielded mean peak linear accelerations at a low-estimated probability range for sustaining a concussion for all three impact conditions. Conversely, the resulting mean peak rotational acceleration values were all found close to the high end of a probability range for sustaining a concussion. A similar tendency was observed for the bicycle and ice hockey helmets under the same impact conditions. Speed skating helmets may not be as effective at managing rotational acceleration and therefore may not successfully protect the user against risks associated with concussion injuries.

  4. A Discussion of the Issue of Football Helmet Removal in Suspected Cervical Spine Injuries

    Science.gov (United States)

    Segan, Ross D.; Cassidy, Christine; Bentkowski, Jamie

    1993-01-01

    In some areas, it is a commonly accepted emergency medical technician protocol to remove a helmet during the initial management of suspected cervical spine injures. After a comprehensive survey of relevant literature, four primary reasons why Emergency Medical Services professionals would desire to remove a helmet emerge. Sources suggest that the presence of a helmet might: 1) interfere with immobilization of the athlete; 2) interfere with the ability to visualize injuries; 3) cause hyperflexion of the cervical spine; and 4) prevent proper airway management during a cardiorespiratory emergency. Many available protocols are designed for the removal of closed chamber motorcycle helmets that do not have removable face masks. There are a great number of differing viewpoints regarding this issue. The varying viewpoints are results of the failure of many emergency medical technician management protocols to address the unique situation presented by a football helmet. We: 1) demonstrate that football helmet removal is potentially dangerous and unnecessary, 2) suggest that cardiorespiratory emergencies can be effectively managed without removing the helmet, and 3) provide sports medicine professional with information that may be used to establish a joint Emergency Medical Services/Sports Medicine emergency action plan. ImagesFig. 1.Fig 2.Fig 3.Fig 4.Fig 5.Fig 6. PMID:16558244

  5. Inadequate Helmet Fit Increases Concussion Severity in American High School Football Players

    Science.gov (United States)

    Greenhill, Dustin A.; Navo, Paul; Zhao, Huaqing; Torg, Joseph; Comstock, R. Dawn; Boden, Barry P.

    2016-01-01

    Background: There is limited information on the relationship between football helmet fit and concussion severity. Hypothesis: Poor helmet fit may predispose football players to a more severe concussion. Study Design: Descriptive epidemiology study. Level of Evidence: Level 3. Methods: Data from concussion injury reports were obtained from the National High School Sports-Related Injury Surveillance System over a 9-year period. Symptoms, duration, and helmet parameters (fit, interior padding) were analyzed for all first-time concussions. Results: Data from 4580 concussions were analyzed. Patients who suffered concussions with a helmet that did not fit properly (3.22%), as determined by an athletic trainer, had higher rates of drowsiness (RR, 1.46; P = 0.005), hyperexcitability (RR, 2.38; P = 0.047), and sensitivity to noise (RR, 1.88; P < 0.001); had more symptoms (5.34 vs 4.54, P = 0.004); and had longer symptom duration (P = 0.04). Athletes with helmets lined with an air bladder had greater rates of sensitivity to light (RR, 1.13; P = 0.02), sensitivity to noise (RR, 1.25; P = 0.009), and longer symptom duration (P = 0.004) compared with foam or gel liners. Conclusion: An improperly fitted football helmet is a risk factor for a concussion with more symptoms and of longer duration. Concussions of longer duration are also more common in players with an air bladder–lined helmet. Current high school football rules should mandate supervision and maintenance of helmet fit throughout the season, prior to impact. Clinical Relevance: Team physicians, athletic trainers, coaches, and high school officials should ensure proper oversight of helmet fit in high school athletes to decrease concussion severity and duration. PMID:27005467

  6. BICYCLE HELMET DESIGN AND THE VIRTUAL VALIDATION OF THE IMPACT, AERODYNAMICS AND PRODUCTION PROCESS

    Directory of Open Access Journals (Sweden)

    Bojan Boshevski

    2017-12-01

    Full Text Available This paper presents the development process of a bicycle helmet through individual research, creation, presentation and analysis of the results of the most important product development stages. The quality of the development and manufacturing process of the protective equipment for extreme sports is an imperative for a successful product and its flawless function. The design of the bicycle helmet is made following the rules of the design in order to create a well-founded and functional product. After creating design sketches, a virtual prototype was developed in "SolidWorks" using the required ergonomic dimensions. 3D printed model of the human head with adapted ergonomic dimensions and the designed bicycle helmet was developed in order to verify the applied ergonomic measures. The virtual model will be used as an input in the finite element analysis of the helmet impact test based on the EN1078 standard and the aerodynamic simulations executed in "SolidWorks Simulation and Flow Simulation", for verification of the impact and aerodynamic properties. Virtual testing of aerodynamic features and the ability of the bicycle helmet to allow ventilation of the user's head indicate that the helmet performs its function in the desired way. Also, the virtual prototype will be used for the production process simulation in "SolidWorks Plastics" in order to analyze the production of the bicycle helmet. The polycarbonate helmet outer shell is subject to a number of simulations for the sake of analyzing the production process in order to obtain the desired characteristics of the polycarbonate outer shell and to avoid the disadvantages that occur in the manufacturing process. The main goal of this paper is to develop a safety bicycle helmet with improved ergonomic, validation of impact, aerodynamic characteristics and production process in order to produce a high quality product for mass use.

  7. Noise exposure is increased with neonatal helmet CPAP in comparison with conventional nasal CPAP.

    Science.gov (United States)

    Trevisanuto, D; Camiletti, L; Doglioni, N; Cavallin, F; Udilano, A; Zanardo, V

    2011-01-01

    in adults, noninvasive ventilation via a helmet is associated with significantly greater noise than nasal and facial masks. We hypothesized that noise exposure could be increased with neonatal helmet continuous positive airway pressure (CPAP) in comparison with conventional nasal CPAP (nCPAP). Our primary objective was to compare the noise intensity produced by a neonatal helmet CPAP and a conventional nCPAP system. Furthermore, we aimed to evaluate the effect of the gas flow rate and the presence of the humidifier and the filter on noise levels during neonatal helmet CPAP treatment. in this bench study, noise intensity was measured in the following settings: helmet CPAP, nCPAP, incubator and the neonatal intensive care unit. In helmet CPAP, noise measurements were performed at different gas flow rates (8, 10 and 12 l/min), while in nCPAP, the flow rate was 8 l/min. For both CPAP systems, the level of pressure was maintained constant at 5 cmH(2) O. during neonatal helmet CPAP, the median (interquartile range) noise levels were significantly higher than those during nCPAP: 70.0 dB (69.9-70.4) vs. 62.7 dB (62.5-63.0); PCPAP, the noise intensities changed with increasing flow rate and with the presence of a humidifier or a filter. noise intensities generated by the neonatal helmet CPAP were significantly higher than those registered while using a conventional nCPAP system. In the helmet, the noise intensity depends on the gas flow rate, and the presence of a humidifier and a filter in the system. 2010 The Acta Anaesthesiologica Scandinavica Foundation.

  8. A cross-sectional observational study of helmet use among motorcyclists in Wa, Ghana.

    Science.gov (United States)

    Akaateba, Millicent Awialie; Amoh-Gyimah, Richard; Yakubu, Ibrahim

    2014-03-01

    Motorcyclists' injuries and fatalities are a major public health concern in many developing countries including Ghana. This study therefore aimed to investigate the prevalence of helmet use among motorcyclists in Wa, Ghana. The method used involved a cross-sectional roadside observation at 12 randomly selected sites within and outside the CBD of Wa. A total of 14,467 motorcyclists made up of 11,360 riders and 3107 pillion riders were observed during the study period. Most observed riders (86.5%) and pillion riders (61.7%) were males. The overall prevalence of helmet use among the observed motorcyclists was 36.9% (95% CI: 36.1-37.7). Helmet use for riders was 45.8% (95% CI: 44.8-46.7) whilst that for pillion riders was 3.7% (95 CI: 3.0-4.4). Based on logistic regression analysis, higher helmet wearing rates were found to be significantly associated with female gender, weekdays, morning periods and at locations within the CBD. Riders at locations outside the CBD were about 7 times less likely to wear a helmet than riders within the CBD (48.9% compared to 42.3%; χ(2)(1)=49.526; plegislation that mandates the use of helmets by both riders and pillion riders on all roads in Ghana, helmet use is generally low in Wa. This suggests that all stakeholders in road safety should jointly intensify education on helmet use and pursue rigorous enforcement on all road types especially at locations outside the CBD to improve helmet use in Wa. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Preventive Effects of Safety Helmets on Traumatic Brain Injury after Work-Related Falls

    Directory of Open Access Journals (Sweden)

    Sang Chul Kim

    2016-10-01

    Full Text Available Introduction: Work-related traumatic brain injury (TBI caused by falls is a catastrophic event that leads to disabilities and high socio-medical costs. This study aimed to measure the magnitude of the preventive effect of safety helmets on clinical outcomes and to compare the effect across different heights of fall. Methods: We collected a nationwide, prospective database of work-related injury patients who visited the 10 emergency departments between July 2010 and October 2012. All of the adult patients who experienced work-related fall injuries were eligible, excluding cases with unknown safety helmet use and height of fall. Primary and secondary endpoints were intracranial injury and in-hospital mortality. We calculated adjusted odds ratios (AORs of safety helmet use and height of fall for study outcomes, and adjusted for any potential confounders. Results: A total of 1298 patients who suffered from work-related fall injuries were enrolled. The industrial or construction area was the most common place of fall injury occurrence, and 45.0% were wearing safety helmets at the time of fall injuries. The safety helmet group was less likely to have intracranial injury comparing with the no safety helmet group (the adjusted odds ratios (ORs (95% confidence interval (CI: 0.42 (0.24–0.73, however, there was no statistical difference of in-hospital mortality between two groups (the adjusted ORs (95% CI: 0.83 (0.34–2.03. In the interaction analysis, preventive effects of safety helmet on intracranial injury were significant within 4 m height of fall. Conclusions: A safety helmet is associated with prevention of intracranial injury resulting from work-related fall and the effect is preserved within 4 m height of fall. Therefore, wearing a safety helmet can be an intervention for protecting fall-related intracranial injury in the workplace.

  10. Integrating Hypnosis with Other Therapies for Treating Specific Phobias: A Case Series.

    Science.gov (United States)

    Hirsch, Joseph A

    2018-04-01

    There is a high prevalence of anxiety disorders including specific phobias and panic disorder in the United States and Europe. A variety of therapeutic modalities including pharmacotherapy, cognitive behavioral therapy, systematic desensitization, hypnosis, in vivo exposure, and virtual reality exposure therapy have been applied. No one modality has been entirely successful. There has been only a limited attempt to combine psychological therapies in the treatment of specific phobias and panic disorder and what has been done has been primarily with systematic desensitization or cognitive behavioral therapy along with hypnotherapy. I present two cases of multiple specific phobias that were successfully treated with hypnotherapy combined with virtual reality exposure therapy or in vivo exposure therapy. The rationale for this integrative therapy and the neurobiological constructs are considered.

  11. A Series-Fed Linear Substrate-Integrated Dielectric Resonator Antenna Array for Millimeter-Wave Applications

    Directory of Open Access Journals (Sweden)

    Ke Gong

    2018-01-01

    Full Text Available A series-fed linear substrate-integrated dielectric resonator antenna array (SIDRAA is presented for millimeter-wave applications, in which the substrate-integrated dielectric resonator antenna (SIDRA elements and the feeding structure can be codesigned and fabricated using the same planar process. A prototype 4 × 1 SIDRAA is designed at Ka-band and fabricated with a two-layer printed circuit board (PCB technology. Four SIDRAs are implemented in the Rogers RT6010 substrate using the perforation technique and fed by a compact substrate-integrated waveguide (SIW through four longitudinal coupling slots within the Rogers RT5880 substrate. The return loss, radiation patterns, and antenna gain were experimentally studied, and good agreement between the measured and simulated results is observed. The SIDRAA example provides a bandwidth of about 10% around 34.5 GHz for 10 dB return loss and stable broadside radiation patterns with the peak gain of 10.5–11.5 dBi across the band.

  12. Metabolic and Subjective Results Review of the Integrated Suit Test Series

    Science.gov (United States)

    Norcross, J.R.; Stroud, L.C.; Klein, J.; Desantis, L.; Gernhardt, M.L.

    2009-01-01

    Crewmembers will perform a variety of exploration and construction activities on the lunar surface. These activities will be performed while inside an extravehicular activity (EVA) spacesuit. In most cases, human performance is compromised while inside an EVA suit as compared to a crewmember s unsuited performance baseline. Subjects completed different EVA type tasks, ranging from ambulation to geology and construction activities, in different lunar analog environments including overhead suspension, underwater and 1-g lunar-like terrain, in both suited and unsuited conditions. In the suited condition, the Mark III (MKIII) EVA technology demonstrator suit was used and suit pressure and suit weight were parameters tested. In the unsuited conditions, weight, mass, center of gravity (CG), terrain type and navigation were the parameters. To the extent possible, one parameter was varied while all others were held constant. Tests were not fully crossed, but rather one parameter was varied while all others were left in the most nominal setting. Oxygen consumption (VO2), modified Cooper-Harper (CH) ratings of operator compensation and ratings of perceived exertion (RPE) were measured for each trial. For each variable, a lower value correlates to more efficient task performance. Due to a low sample size, statistical significance was not attainable. Initial findings indicate that suit weight, CG and the operational environment can have a large impact on human performance during EVA. Systematic, prospective testing series such as those performed to date will enable a better understanding of the crucial interactions of the human and the EVA suit system and their environment. However, work remains to be done to confirm these findings. These data have been collected using only unsuited subjects and one EVA suit prototype that is known to fit poorly on a large demographic of the astronaut population. Key findings need to be retested using an EVA suit prototype better suited to a

  13. Helmet-mounted display requirements: just another head-up display (HUD) or a different animal altogether?

    Science.gov (United States)

    Newman, Richard L.; Haworth, Loran A.

    1994-06-01

    The helmet-mounted display (HMD) presents flight, navigation, and weapon information in the pilot's line of sight. The HMD was developed to allow the pilot to retain aircraft and weapon information while looking off boresight. The present study reviewed the state-of-the-art in HMDs and identified a number of issues applying to HMDs. Several are identical to head-up display (HUD) issues: symbol standardization, excessive clutter, and the need for integration with other cockpit displays and controls. Other issues are unique to the head-mounted display: symbol stabilization, inadequate definitions, undefined symbol drive laws, helmet considerations, and field-of-view (FOV) vs. resolution tradeoff requirements. Symbol stabilization is critical. In the Apache helicopter, the lack of compensation for pilot head motion creates excessive workload during hovering and nap-of-the-earth (NOE) flight. This high workload translates into excessive training requirements. At the same time, misleading symbology makes interpretation of the height of obstructions impossible. The underlying cause is the absence of design criteria for HMDs. The existing military standard does not reflect the current state of technology. In addition, there are inadequate test and evaluation guidelines. The situation parallels the situation for HUDs several years ago.

  14. Integrated Tiger Series of electron/photon Monte Carlo transport codes: a user's guide for use on IBM mainframes

    International Nuclear Information System (INIS)

    Kirk, B.L.

    1985-12-01

    The ITS (Integrated Tiger Series) Monte Carlo code package developed at Sandia National Laboratories and distributed as CCC-467/ITS by the Radiation Shielding Information Center (RSIC) at Oak Ridge National Laboratory (ORNL) consists of eight codes - the standard codes, TIGER, CYLTRAN, ACCEPT; the P-codes, TIGERP, CYLTRANP, ACCEPTP; and the M-codes ACCEPTM, CYLTRANM. The codes have been adapted to run on the IBM 3081, VAX 11/780, CDC-7600, and Cray 1 with the use of the update emulator UPEML. This manual should serve as a guide to a user running the codes on IBM computers having 370 architecture. The cases listed were tested on the IBM 3033, under the MVS operating system using the VS Fortran Level 1.3.1 compiler

  15. Comparison of experimental pulse-height distributions in germanium detectors with integrated-tiger-series-code predictions

    International Nuclear Information System (INIS)

    Beutler, D.E.; Halbleib, J.A.; Knott, D.P.

    1989-01-01

    This paper reports pulse-height distributions in two different types of Ge detectors measured for a variety of medium-energy x-ray bremsstrahlung spectra. These measurements have been compared to predictions using the integrated tiger series (ITS) Monte Carlo electron/photon transport code. In general, the authors find excellent agreement between experiments and predictions using no free parameters. These results demonstrate that the ITS codes can predict the combined bremsstrahlung production and energy deposition with good precision (within measurement uncertainties). The one region of disagreement observed occurs for low-energy (<50 keV) photons using low-energy bremsstrahlung spectra. In this case the ITS codes appear to underestimate the produced and/or absorbed radiation by almost an order of magnitude

  16. A Spectral Unmixing Model for the Integration of Multi-Sensor Imagery: A Tool to Generate Consistent Time Series Data

    Directory of Open Access Journals (Sweden)

    Georgia Doxani

    2015-10-01

    Full Text Available The Sentinel missions have been designed to support the operational services of the Copernicus program, ensuring long-term availability of data for a wide range of spectral, spatial and temporal resolutions. In particular, Sentinel-2 (S-2 data with improved high spatial resolution and higher revisit frequency (five days with the pair of satellites in operation will play a fundamental role in recording land cover types and monitoring land cover changes at regular intervals. Nevertheless, cloud coverage usually hinders the time series availability and consequently the continuous land surface monitoring. In an attempt to alleviate this limitation, the synergistic use of instruments with different features is investigated, aiming at the future synergy of the S-2 MultiSpectral Instrument (MSI and Sentinel-3 (S-3 Ocean and Land Colour Instrument (OLCI. To that end, an unmixing model is proposed with the intention of integrating the benefits of the two Sentinel missions, when both in orbit, in one composite image. The main goal is to fill the data gaps in the S-2 record, based on the more frequent information of the S-3 time series. The proposed fusion model has been applied on MODIS (MOD09GA L2G and SPOT4 (Take 5 data and the experimental results have demonstrated that the approach has high potential. However, the different acquisition characteristics of the sensors, i.e. illumination and viewing geometry, should be taken into consideration and bidirectional effects correction has to be performed in order to reduce noise in the reflectance time series.

  17. Advanced Helmet Mounted Display (AHMD) for simulator applications

    Science.gov (United States)

    Sisodia, Ashok; Riser, Andrew; Bayer, Michael; McGuire, James P.

    2006-05-01

    The Advanced Helmet Mounted Display (AHMD), augmented reality visual system first presented at last year's Cockpit and Future Displays for Defense and Security conference, has now been evaluated in a number of military simulator applications and by L-3 Link Simulation and Training. This paper presents the preliminary results of these evaluations and describes current and future simulator and training applications for HMD technology. The AHMD blends computer-generated data (symbology, synthetic imagery, enhanced imagery) with the actual and simulated visible environment. The AHMD is designed specifically for highly mobile deployable, minimum resource demanding reconfigurable virtual training systems to satisfy the military's in-theater warrior readiness objective. A description of the innovative AHMD system and future enhancements will be discussed.

  18. Digital Image Processing Overview For Helmet Mounted Displays

    Science.gov (United States)

    Parise, Michael J.

    1989-09-01

    Digital image processing provides a means to manipulate an image and presents a user with a variety of display formats that are not available in the analog image processing environment. When performed in real time and presented on a Helmet Mounted Display, system capability and flexibility are greatly enhanced. The information content of a display can be increased by the addition of real time insets and static windows from secondary sensor sources, near real time 3-D imaging from a single sensor can be achieved, graphical information can be added, and enhancement techniques can be employed. Such increased functionality is generating a considerable amount of interest in the military and commercial markets. This paper discusses some of these image processing techniques and their applications.

  19. Offsetting or Enhancing Behavior: An Empirical Analysis of Motorcycle Helmet Safety Legislation.

    Science.gov (United States)

    Lee, Jonathan M

    2015-10-01

    This study uses state-level panel data from a 33-year period to test the hypotheses of offsetting and enhancing behavior with regards to motorcycle helmet legislation. Results presented in this article find no evidence of offsetting behavior and are consistent with the presence of enhancing behavior. State motorcycle helmet laws are estimated to reduce motorcycle crashes by 18.4% to 31.9%. In the absence of any behavioral adaptations among motorcyclists mandatory helmet laws are not expected to have any significant impact on motorcycle crash rates. The estimated motorcycle crash reductions do not appear to be driven by omitted variable bias or nonclassical measurement error in reported crashes. Overall, the results strongly suggest that mandatory helmet laws yield significant changes in motorcycle mobility in the form of reduced risk taking and/or decreased utilization. © 2015 Society for Risk Analysis.

  20. Face mask removal is safer than helmet removal for emergent airway access in American football.

    Science.gov (United States)

    Swartz, Erik E; Mihalik, Jason P; Beltz, Nora M; Day, Molly A; Decoster, Laura C

    2014-06-01

    In cases of possible cervical spine injury, medical professionals must be prepared to achieve rapid airway access while concurrently restricting cervical spine motion. Face mask removal (FMR), rather than helmet removal (HR), is recommended to achieve this. However, no studies have been reported that compare FMR directly with HR. The purpose of this study was to compare motion, time, and perceived difficulty in two commonly used American football helmets between FMR and HR techniques, and when helmet air bladders were deflated before HR compared with inflated scenarios. The study incorporated a repeated measures design and was performed in a controlled laboratory setting. Participants included 22 certified athletic trainers (15 men and seven women; mean age, 33.9±10.5 years; mean experience, 11.4±10.0 years; mean height, 172±9.4 cm; mean mass, 76.7±14.9 kg). All participants were free from upper extremity or central nervous system pathology for 6 months and provided informed consent. Dependent variables included head excursion in degrees (computed by subtracting the minimum position from the maximum position) in each of the three planes (sagittal, frontal, transverse), time to complete the required task, and ratings of perceived exertion. To address our study purposes, we used two-by-two repeated-measures analysis of variance (removal technique×helmet type, helmet type×deflation status) for each dependent variable. Independent variables consisted of removal technique (FMR and HR), helmet type (Riddell Revolution IQ [RIQ] and VSR4), and helmet deflation status (deflated [D], inflated, [I]). After familiarization, participants conducted two successful trials for each of six conditions in random order (RIQ-FMR, VSR4-FMR, RIQ-HR-D, VSR4-HR-D, RIQ-HR-I, and VSR4-HR-I). Face masks, helmets, and shoulder pads were removed from a live model wearing a properly fitted helmet and shoulder pads. The participant and an investigator stabilized the model's head. A six

  1. Aerodynamic study of time-trial helmets in cycling racing using CFD analysis.

    Science.gov (United States)

    Beaumont, F; Taiar, R; Polidori, G; Trenchard, H; Grappe, F

    2018-01-23

    The aerodynamic drag of three different time-trial cycling helmets was analyzed numerically for two different cyclist head positions. Computational Fluid Dynamics (CFD) methods were used to investigate the detailed airflow patterns around the cyclist for a constant velocity of 15 m/s without wind. The CFD simulations have focused on the aerodynamic drag effects in terms of wall shear stress maps and pressure coefficient distributions on the cyclist/helmet system. For a given head position, the helmet shape, by itself, obtained a weak effect on a cyclist's aerodynamic performance (CFD results have also shown that both helmet shape and head position significantly influence drag forces, pressure and wall shear stress distributions on the whole cyclist's body due to the change in the near-wake behavior and in location of corresponding separation and attachment areas around the cyclist. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. The effect of motorcycle helmet fit on estimating head impact kinematics from residual liner crush.

    Science.gov (United States)

    Bonin, Stephanie J; Gardiner, John C; Onar-Thomas, Arzu; Asfour, Shihab S; Siegmund, Gunter P

    2017-09-01

    Proper helmet fit is important for optimizing head protection during an impact, yet many motorcyclists wear helmets that do not properly fit their heads. The goals of this study are i) to quantify how a mismatch in headform size and motorcycle helmet size affects headform peak acceleration and head injury criteria (HIC), and ii) to determine if peak acceleration, HIC, and impact speed can be estimated from the foam liner's maximum residual crush depth or residual crush volume. Shorty-style helmets (4 sizes of a single model) were tested on instrumented headforms (4 sizes) during linear impacts between 2.0 and 10.5m/s to the forehead region. Helmets were CT scanned to quantify residual crush depth and volume. Separate linear regression models were used to quantify how the response variables (peak acceleration (g), HIC, and impact speed (m/s)) were related to the predictor variables (maximum crush depth (mm), crush volume (cm 3 ), and the difference in circumference between the helmet and headform (cm)). Overall, we found that increasingly oversized helmets reduced peak headform acceleration and HIC for a given impact speed for maximum residual crush depths less than 7.9mm and residual crush volume less than 40cm 3 . Below these levels of residual crush, we found that peak headform acceleration, HIC, and impact speed can be estimated from a helmet's residual crush. Above these crush thresholds, large variations in headform kinematics are present, possibly related to densification of the foam liner during the impact. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Maintaining neutral sagittal cervical alignment after football helmet removal during emergency spine injury management.

    Science.gov (United States)

    Decoster, Laura C; Burns, Matthew F; Swartz, Erik E; Murthi, Dinakar S; Hernandez, Adam E; Vailas, James C; Isham, Linda L

    2012-04-15

    Descriptive laboratory study. To determine whether the placement of padding beneath the occiput after helmet removal is an effective intervention to maintain neutral sagittal cervical spine alignment in a position comparable with the helmeted condition. Current on-field recommendations for managing football athletes with suspected cervical spine injuries call for face mask removal, rather than helmet removal, because the combination of helmet and shoulder pads has been shown to maintain neutral cervical alignment. Therefore, in cases when helmet removal is required, recommendations also call for shoulder pad removal. Because removal of equipment causes motion, any technique that postpones the need to remove the shoulder pads would reduce prehospital motion. Four lateral radiographs of 20 male participants were obtained (age = 23.6 ± 2.7 years). Radiographs of participants wearing shoulder pads and helmet were first obtained. The helmet was removed and radiographs of participants with occipital padding were obtained immediately and 20 minutes later and finally without occipital padding. Cobb angle measurements for C2-C6 vertebral segments were determined by an orthopedic spine surgeon blinded to the study's purpose. Intraobserver reliability was determined using intraclass coefficient analysis. Measurements were analyzed using a 1×4 repeated-measures analysis of variance and post hoc pairwise comparisons with Bonferroni correction. Intraobserver analysis showed excellent reliability (intraclass correlation = 1.0; 95% confidence interval [CI], 0.999-1.0). Repeated-measures analysis of variance detected significant differences (F(3,17) = 13.34; P football helmet in the field, occipital padding (along with full body/head immobilization techniques) may be used to limit cervical lordosis, allowing safe delay of shoulder pad removal.

  4. Design of a Helmet Liner for Improved Low Velocity Impact Protection

    Science.gov (United States)

    2013-05-01

    FIGURE 14. MONORAIL DROP TEST WITH DOT-SIZE C HEADFORM AND HEMISPHERICAL ANVIL ........................... 14  FIGURE 15. ACH PAD CONFIGURATION. LEFT...materials. In this project, the monorail drop test device, used for the helmeted headform drop test, was modified for material testing as shown in Figure...a guided free fall drop test using a monorail drop test apparatus as shown in Figure 14. All helmets tested in this study were ACH-Size Large and

  5. Auditory and visual reaction time and peripheral field of vision in helmet users

    Directory of Open Access Journals (Sweden)

    Abbupillai Adhilakshmi

    2016-12-01

    Full Text Available Background: The incidence of fatal accidents are more in two wheeler drivers compared to four wheeler drivers. Head injury is of serious concern when recovery and prognosis of the patients are warranted, helmets are being used for safety purposes by moped, scooters and motorcycle drivers. Although, helmets are designed with cushioning effect to prevent head injuries but there are evidences of increase risk of neck injuries and reduced peripheral vision and hearing in helmet users. A complete full coverage helmets provide about less than 3 percent restrictions in horizontal peripheral visual field compared to rider without helmet. The standard company patented ergonomically designed helmets which does not affect the peripheral vision neither auditory reaction time. Objective: This pilot study aimed to evaluate the peripheral field of vision and auditory and visual reaction time in a hypertensive, diabetic and healthy male and female in order to have a better insight of protective characteristics of helmet in health and disease. Method: This pilot study carried out on age matched male of one healthy, one hypertensive and one diabetic and female subject of one healthy, one hypertensive and one diabetics. The field of vision was assessed by Lister’s perimeter whereas auditory and visual reaction time was recorded with response analyser. Result : Gender difference was not noted in peripheral field of vision but mild difference was found in auditory reaction time for high frequency and visual reaction time for both red and green colour in healthy control. But lateral and downward peripheral visual field was found reduced whereas auditory and visual reaction time was found increased in both hypertensive and diabetic subject in both sexes. Conclusion: Peripheral vision, auditory reaction time and visual reaction time in hypertensive and diabetics may lead to vulnerable accident. Helmet use has proven to reduce extent of injury in motorcyclist and

  6. [Prevalence of helmet use in children and adolescents in Germany and preventable bicycle-related head injuries].

    Science.gov (United States)

    Gutsche, J; Hintzpeter, B; Neuhauser, H; Schlaud, M

    2011-08-01

    Head injuries are the main cause of death in bicycle-related accidents among children and adolescents. According to a Cochrane Review, the risk of head injury (OR 0.31; 95% CI 0.26-0.37) or brain injury (OR 0.31; 95% CI 0.23-0.42) decreases by 69% if a helmet is worn. This study presents the prevalence of helmet use in cycling children and adolescents in Germany and the proportion of head injuries that could be prevented by wearing helmets. The potential effects of increased helmet wearing rates on the population attributable risk percentage for head injuries (PAR%) are demonstrated. The prevalence of helmet use in children aged 3-17 years was analysed using data from the German Health Interview and Examination Survey for Children and Adolescents (KiGGS). The percentage of head injuries preventable by helmet use in this group is estimated by calculating PAR%. Prevalence rates of helmet use and odds ratios from a Cochrane Review about the effectiveness of bicycle helmets for the prevention of head injuries were used for analysis. The potential effect of increased helmet use is shown in 3 scenarios by means of differences of PAR% values in the most relevant age groups. The older the children, the less likely they are to wear a helmet: 89.5% (95% CI 88.0%-90.8%) of the 3- to 6-year-old children wear a helmet when cycling but only 11.0% (95% CI 9.3%-12.9%) of 14- to 17-year-old adolescents do. In the youngest group (3-6 years) 19% of bicycle-related head injuries are attributable to the non-use of helmets, but this proportion rises to 67% in the oldest group (14-17 years). The PAR% of head injuries associated with not wearing a helmet may be reduced by more than a third by increasing the helmet wearing rate to 67% (2 out of 3) among adolescents, and may be reduced to half if 75% of adolescents wore a helmet. Particularly older children and adolescents hardly use bicycle helmets, hence the rate of preventable head injury is high. Efforts towards increasing helmet use

  7. Helmet Use and Associated Factors among Thai Motorcyclists during Songkran Festival

    Science.gov (United States)

    Siviroj, Penprapa; Peltzer, Karl; Pengpid, Supa; Morarit, Sompong

    2012-01-01

    The aim of this study was to assess helmet use and associated factors among motorcycle riders during Songkran festival in Thailand. A cross-sectional survey was conducted to determine the prevalence of helmet use among Thai motorcycle riders (sample size = 18,998) during four days of the Songkran festival. For this sample, the population of motorcycle riders was consecutively selected using quota sampling from 12 petrol stations in four provinces from each of the four main geographical regions of Thailand. The study was conducted at petrol stations at roads in town, outside town and highway at different time intervals when trained field staff administered a structured questionnaire and performed an observation checklist. Results indicate that 44.2% of the motorcycle riders and 72.5% of the motorcycle passengers had not been using a helmet. In multivariable analysis demographics, environmental factors, helmet use experiences and attitudes and recalling a lower exposure to road safety awareness (RSA) campaign were associated with non-helmet use among motorcyclists. It appears that the RSA campaign may have some positive effect on reducing non-helmet use among motorcycle riders during the Songkran festival. PMID:23202686

  8. Experimental investigations on the cooling of a motorcycle helmet with phase change material (PCM

    Directory of Open Access Journals (Sweden)

    Fok S.C.

    2011-01-01

    Full Text Available The thermal comfort of motorcycle helmet during hot weather is important as it can affect the physiological and psychological condition of the rider. This paper examines the use of phase change material (PCM to cool a motorcycle helmet and presents the experimental investigations on the influences of the simulated solar radiation, wind speed, and heat generation rate on the cooling system. The result shows that the PCM-cooled helmet is able to prolong the thermal comfort period compared to a normal helmet. The findings also indicate that the heat generation from the head is the predominant factor that will affect the PCM melting time. Simulated solar radiation and ram-air due to vehicle motion under adiabatic condition can have very little influences on the PCM melting time. The results suggested that the helmet usage time would be influenced by the amount of heat generated from the head. Some major design considerations based on these findings have been included. Although this investigation focuses on the cooling of a motorcyclist helmet, the findings would also be useful for the development of PCM-cooling systems in other applications.

  9. Implementation of an all-ages mandatory helmet policy for ice skating.

    Science.gov (United States)

    Thibault-Halman, Ginette; Fenerty, Lynne; Wheadon-Hore, Kathie; Walling, Simon; Cusimano, Michael D; Clarke, David B

    2015-12-01

    Ice skaters sustain a significant number of head injuries each winter. We are the first to implement an all-ages helmet policy at a university-based Canadian arena. We report our experience from a cross-sectional observational study as well as the policy's consequences on helmet use and skating participation. Educational programming was provided prior to policy implementation. Observations of helmet use, falls and skater demographics were conducted prior to education/implementation and after policy implementation. The number of skaters observed was essentially unchanged by the policy; 361 skaters were observed pre-implementation, while 358 were observed post-implementation during the same number of observation-hours. Pre-implementation, helmet use ranged from 97% among children under 12 to 10% among adults; post-implementation use in all skaters was 99%. Falls were observed among all age groups, with preponderance among those aged 4-12. An all-ages helmet policy was successful both in achieving helmet use among all skaters and in maintaining participation rates. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  10. The formulation and implementation of a national helmet law: a case study from Viet Nam.

    Science.gov (United States)

    Passmore, Jonathon W; Nguyen, Lan Huong; Nguyen, Nam Phuong; Olivé, Jean-Marc

    2010-10-01

    Road traffic injuries are a leading cause of death and disability in Viet Nam. In 2008, official data reported 11 243 deaths and 7771 serious injuries on the roads, of which an estimated 60% of fatalities occur in motorcycle riders and passengers. In recognition of this problem, Viet Nam has had partial motorcycle helmet legislation since 1995. However, for a variety of reasons, implementation and enforcement have been limited. On 15 December 2007, Viet Nam's first comprehensive mandatory helmet law came into effect, covering all riders and passengers on all roads nationwide. Penalties increased ten-fold and cohorts of police were mobilized for enforcement. The Viet Nam national helmet legislation was developed and implemented by the National Traffic Safety Committee. Despite past barriers to enforcement, increased policing in 2008 led to 680 000 infringements being issued for non-helmet wearing. While changes in helmet wearing were not nationally observed, significant increases were documented in selected provinces in the first six months of the law's introduction. In Da Nang, helmet wearing increased from 27 to 99%. In the first three months after the law took effect, surveillance data from 20 urban and rural hospitals, found the risk of road traffic head injuries and deaths decreased by 16% and 18% respectively. Political leadership, intensive advanced public education and stringent enforcement have contributed to the successful implementation of the new law. Through continual monitoring of the legislation, loopholes detrimental to the effectiveness of the law have been identified and addressed.

  11. Evaluation of a promotional strategy to increase bicycle helmet use by children.

    Science.gov (United States)

    Parkin, P C; Spence, L J; Hu, X; Kranz, K E; Shortt, L G; Wesson, D E

    1993-04-01

    Bicycle-related head injuries are an important cause of death and disability, despite the availability of helmets. The objective of this study was to evaluate the effectiveness of a school-based bicycle helmet promotion program in increasing helmet use by children while controlling for secular trends. Two high-income and two low-income schools in an urban Canadian community were selected to receive a bicycle helmet promotion intervention, with the remaining 18 schools serving as controls. Approximately 1800 observations of bicycling children were made at randomly selected observational sites 2 to 5 months after the intervention to assess changes in behavior. Helmet use at all observation sites tripled from 3.4% (1990, preintervention) to 16% (1991, postintervention). In the high-income intervention area, observed helmet use rose dramatically from 4% to 36% in contrast to the more modest increase in the high-income control area from 4% to 15%. In the low-income intervention area, there was a modest increase from 1% to 7%, but it did not differ from the increase in the low-income control area from 3% to 13%. The program was highly successful in children of high-income families but not in children of low-income families. Developing strategies for low-income families remains a priority.

  12. Facial asymmetry correction with moulded helmet therapy in infants with deformational skull base plagiocephaly.

    Science.gov (United States)

    Kreutz, Matthias; Fitze, Brigitte; Blecher, Christoph; Marcello, Augello; Simon, Ruben; Cremer, Rebecca; Zeilhofer, Hans-Florian; Kunz, Christoph; Mayr, Johannes

    2018-01-01

    The recommendation issued by the American Academy of Pediatrics in the early 1990s to position infants on their back during sleep to prevent sudden infant death syndrome (SIDS) has dramatically reduced the number of deaths due to SIDS but has also markedly increased the prevalence of positional skull deformation in infants. Deformation of the base of the skull occurs predominantly in very severe deformational plagiocephaly and is accompanied by facial asymmetry, as well as an altered ear position, called ear shift. Moulded helmet therapy has become an accepted treatment strategy for infants with deformational plagiocephaly. The aim of this study was to determine whether facial asymmetry could be corrected by moulded helmet therapy. In this retrospective, single-centre study, we analysed facial asymmetry of 71 infants with severe deformational plagiocephaly with or without deformational brachycephaly who were undergoing moulded helmet therapy between 2009 and 2013. Computer-assisted, three-dimensional, soft-tissue photographic scanning was used to record the head shape before and after moulded helmet therapy. The distance between two landmarks in the midline of the face (i.e., root of the nose and nasal septum) and the right and left tragus were measured on computer-generated indirect and objective 3D photogrammetry images. A quotient was calculated between the two right- and left-sided distances to the midline. Quotients were compared before and after moulded helmet therapy. Infants without any therapy served as a control group. The median age of the infants before onset of moulded helmet therapy was 5 months (range 3-16 months). The median duration of moulded helmet therapy was 5 months (range 1-16 months). Comparison of the pre- and post-treatment quotients of the left vs. right distances measured between the tragus and root of the nose (n = 71) and nasal septum (n = 71) revealed a significant reduction of the asymmetry (Tragus-Nasion-Line Quotient: 0

  13. Prevalence and determinants of non-standard motorcycle safety helmets amongst food delivery workers in Selangor and Kuala Lumpur.

    Science.gov (United States)

    Kulanthayan, S; See, Lai Git; Kaviyarasu, Y; Nor Afiah, M Z

    2012-05-01

    Almost half of the global traffic crashes involve vulnerable groups such as pedestrian, cyclists and two-wheeler users. The main objective of this study was to determine the factors that influence standard of the safety helmets used amongst food delivery workers by presence of Standard and Industrial Research Institute of Malaysia (SIRIM) certification label. A cross sectional study was conducted amongst 150 food delivery workers from fast food outlets in the vicinity of Selangor and Kuala Lumpur. During observation, safety helmets were classified as standard safety helmet in the presence of SIRIM label and non-standard in the absence of the label. They were approached for questionnaire participation once consent was obtained and were requested to exchange their safety helmet voluntarily with a new one after the interview. Data analysis was carried out using SPSS. Chi square and logistic regression analysis was applied to determine the significance and odds ratio of the variables studied, respectively (penetration test, age, education level, knowledge, crash history, types of safety helmet, marital status and years of riding experience) against the presence of SIRIM label. The response rate for this study was 85.2%. The prevalence of non-standard helmets use amongst fast food delivery workers was 55.3%. Safety helmets that failed the penetration test had higher odds of being non-standard helmets compared with safety helmets passing the test. Types of safety helmet indicated half-shell safety helmets had higher odds to be non-standard safety helmets compared to full-shell safety helmets. Riders with more years of riding experience were in high odds of wearing non-standard safety helmets compared to riders with less riding experience. Non-standard (non-SIRIM approved) helmets were more likely to be half-shell helmets, were more likely to fail the standards penetration test, and were more likely to be worn by older, more experienced riders. The implications of these

  14. Determinants of helmet use behaviour among employed motorcycle riders in Yazd, Iran based on theory of planned behaviour.

    Science.gov (United States)

    Ali, Mehri; Saeed, Mazloomy Mahmoodabad Seyed; Ali, Morowatisharifabad Mohammad; Haidar, Nadrian

    2011-09-01

    This paper reports on predictors of helmet use behaviour, using variables based on the theory of planned behaviour model among the employed motorcycle riders in Yazd-Iran, in an attempt to identify influential factors that may be addressed through intervention efforts. In 2007, a cluster random sample of 130 employed motorcycle riders in the city of Yazd in central Iran, participated in the study. Appropriate instruments were designed to measure the variables of interest (attitude, subjective norms, perceived behaviour control, intention along with helmet use behaviour). Reliability and validity of the instruments were examined and approved. The statistical analysis of the data included descriptive statistics, bivariate correlations, and multiple regression. Based on the results, 56 out of all the respondents (43.1%) had history of accident by motorcycle. Of these motorcycle riders only 10.7% were wearing their helmet at the time of their accident. Intention and perceived behavioural control showed a significant relationship with helmet use behaviour and perceived behaviour control was the strongest predictor of helmet use intention, followed by subjective norms, and attitude. It was found that that helmet use rate among motorcycle riders was very low. The findings of present study provide a preliminary support for the TPB model as an effective framework for examining helmet use in motorcycle riders. Understanding motorcycle rider's thoughts, feelings and beliefs about helmet use behaviour can assist intervention specialists to develop and implement effective programs in order to promote helmet use among motorcycle riders. Copyright © 2010 Elsevier Ltd. All rights reserved.

  15. Evaluation of Monte Carlo electron-Transport algorithms in the integrated Tiger series codes for stochastic-media simulations

    International Nuclear Information System (INIS)

    Franke, B.C.; Kensek, R.P.; Prinja, A.K.

    2013-01-01

    Stochastic-media simulations require numerous boundary crossings. We consider two Monte Carlo electron transport approaches and evaluate accuracy with numerous material boundaries. In the condensed-history method, approximations are made based on infinite-medium solutions for multiple scattering over some track length. Typically, further approximations are employed for material-boundary crossings where infinite-medium solutions become invalid. We have previously explored an alternative 'condensed transport' formulation, a Generalized Boltzmann-Fokker-Planck (GBFP) method, which requires no special boundary treatment but instead uses approximations to the electron-scattering cross sections. Some limited capabilities for analog transport and a GBFP method have been implemented in the Integrated Tiger Series (ITS) codes. Improvements have been made to the condensed history algorithm. The performance of the ITS condensed-history and condensed-transport algorithms are assessed for material-boundary crossings. These assessments are made both by introducing artificial material boundaries and by comparison to analog Monte Carlo simulations. (authors)

  16. Clinical review: Helmet and non-invasive mechanical ventilation in critically ill patients.

    Science.gov (United States)

    Esquinas Rodriguez, Antonio M; Papadakos, Peter J; Carron, Michele; Cosentini, Roberto; Chiumello, Davide

    2013-04-25

    Non-invasive mechanical ventilation (NIV) has proved to be an excellent technique in selected critically ill patients with different forms of acute respiratory failure. However, NIV can fail on account of the severity of the disease and technical problems, particularly at the interface. The helmet could be an alternative interface compared to face mask to improve NIV success. We performed a clinical review to investigate the main physiological and clinical studies assessing the efficacy and related issues of NIV delivered with a helmet. A computerized search strategy of MEDLINE/PubMed (January 2000 to May 2012) and EMBASE (January 2000 to May 2012) was conducted limiting the search to retrospective, prospective, nonrandomized and randomized trials. We analyzed 152 studies from which 33 were selected, 12 physiological and 21 clinical (879 patients). The physiological studies showed that NIV with helmet could predispose to CO₂ rebreathing and increase the patients' ventilator asynchrony. The main indications for NIV were acute cardiogenic pulmonary edema, hypoxemic acute respiratory failure (community-acquired pneumonia, postoperative and immunocompromised patients) and hypercapnic acute respiratory failure. In 9 of the 21 studies the helmet was compared to a face mask during either continous positive airway pressure or pressure support ventilation. In eight studies oxygenation was similar in the two groups, while the intubation rate was similar in four and lower in three studies for the helmet group compared to face mask group. The outcome was similar in six studies. The tolerance was better with the helmet in six of the studies. Although these data are limited, NIV delivered by helmet could be a safe alternative to the face mask in patients with acute respiratory failure.

  17. Injuries and helmet use related to non-motorized wheeled activities among pediatric patients.

    Science.gov (United States)

    Lindsay, H; Brussoni, M

    2014-07-01

    Patients presenting to emergency departments (ED) for injuries resulting from recreational activities represent a unique source of information on important directions for injury prevention efforts. We describe the epidemiology of non-motorized wheeled activity-related injury in pediatric patients presenting to Canadian EDs as well as patients' helmet use. Data for the years 2004 to 2009 were abstracted from the Canadian Hospitals Injury Reporting and Prevention Program (CHIRPP), a national ED injury surveillance program in fifteen hospitals. Most of the 28 618 children aged 1 to 16 years injured during non-motorized wheeled activities were injured while cycling, followed by skateboarding. Most injuries occurred among boys. Children injured on scooters tended to be younger whereas skateboarders were the oldest. On average, the number of all injuries decreased by 6% over the time period. Falls were the most common mechanism of injury; 8.3% of patients had head injuries, which were seen more often among cyclists than other wheeled-activity users. Helmet use was greatest among cyclists (62.2%) and lowest among skateboarders (32.9%). Injured patients presenting to EDs in jurisdictions with legislation mandating helmet use had 2.12 greater odds of helmet use and 0.86 lesser odds of head injury compared with those presenting in jurisdictions without helmet laws. These results provide further evidence that legislation mandating helmet use may be an effective way of reducing injury among all wheeled-activity users. The small number of patients who presented with helmet use and protective gear (59.4% overall) suggests that this remains an area for intervention.

  18. Applying the health action process approach to bicycle helmet use and evaluating a social marketing campaign.

    Science.gov (United States)

    Karl, Florian M; Smith, Jennifer; Piedt, Shannon; Turcotte, Kate; Pike, Ian

    2017-08-05

    Bicycle injuries are of concern in Canada. Since helmet use was mandated in 1996 in the province of British Columbia, Canada, use has increased and head injuries have decreased. Despite the law, many cyclists do not wear a helmet. Health action process approach (HAPA) model explains intention and behaviour with self-efficacy, risk perception, outcome expectancies and planning constructs. The present study examines the impact of a social marketing campaign on HAPA constructs in the context of bicycle helmet use. A questionnaire was administered to identify factors determining helmet use. Intention to obey the law, and perceived risk of being caught if not obeying the law were included as additional constructs. Path analysis was used to extract the strongest influences on intention and behaviour. The social marketing campaign was evaluated through t-test comparisons after propensity score matching and generalised linear modelling (GLM) were applied to adjust for the same covariates. 400 cyclists aged 25-54 years completed the questionnaire. Self-efficacy and Intention were most predictive of intention to wear a helmet, which, moderated by planning, strongly predicted behaviour. Perceived risk and outcome expectancies had no significant impact on intention. GLM showed that exposure to the campaign was significantly associated with higher values in self-efficacy, intention and bicycle helmet use. Self-efficacy and planning are important points of action for promoting helmet use. Social marketing campaigns that remind people of appropriate preventive action have an impact on behaviour. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  19. The impact of mandatory helmet law on the outcome of maxillo facial trauma: a comparative study in kerala.

    Science.gov (United States)

    Usha, M; Ravindran, V; Soumithran, C S; Ravindran Nair, K S

    2014-06-01

    Motorcyclists comprise the majority of road-traffic victims in low and middle income countries,and consequently, the majority of the road-traffic victims globally. Simple measures can be taken to make safer on the roads, which include enforcement of safety measures like seat belt and helmets. The compulsory Helmet law was enforced in Kerala on 18/06/07. Resistance to legislation on motorcycle helmets still coexists world wide with debate on the effectiveness of helmets. In an attempt to analyze the protective effect of helmets on facial injuries a comparative study was conducted in Government Dental College, Calicut, which is a major trauma centre in northern Kerala. Data for the present study was obtained from the patients who have reported to the Emergency Department of Oral and Maxillofacial Surgery, Government Dental College, Calicut, for a period of 6 months immediately after the implementation of strict helmet rule in Kerala. For the study all patients with a history of nonfatal motor cycle accident sustaining facial injuries were included. The results were compared with the study conducted in the same institution in the pre law period. The study demonstrates the protective effect of motorcycle helmets in decreasing the morbidity of maxillofacial trauma.There was a marked decrease in incidence of motorcycle-related injuries, remarkable increase in helmet usage and better outcome in helmeted individuals in the post law period. Road traffic injury control is a public health problem. Health and medical professionals have an ethical responsibility to educate and arrange for the safety of individuals. Helmets are effective in preventing or reducing the severity of motorcycle-related injuries and in a developing country like India, enforced mandatory motor cycle helmet law is potentially one of the most cost effective interventions available.

  20. A DESCRIPTIVE STUDY OF PATTERN OF FATAL HEAD INJURY IN HELMETED AND NONHELMETED VICTIMS OF TWO WHEELER ACCIDENTS

    Directory of Open Access Journals (Sweden)

    P. A. Sheeju

    2016-07-01

    Full Text Available BACKGROUND Motor vehicle crashes are a major cause of fatality all over the world. By 2020, motor vehicle injury is projected to become the third leading contributor to the global burden of disease in the world. Motor cyclists are about 25 times more likely than car occupants to die in Road Traffic Accidents. Data on the incidence and types of crashes is required to guide safety policy. Knowledge of how injuries are caused and of what type they are of valuable instrument for identifying interventions and monitoring the effectiveness of intervention. The present study was done to find out the factors that contribute for motor cycle crashes and to study the injury pattern seen in helmeted and non-helmeted victims. MATERIAL AND METHODS Victims of two wheeler accidents brought for autopsy in a Govt. Medical College were studied from October 2010 to August 2011. Two wheelers include motor cycles, scooters and mopeds. Bicycles were excluded from the study. Accidents include all types; against all types of vehicles running on the road, collision with any object, surface or any animal or fall from vehicle. The details of the accident were collected in a printed proforma from relative/witnesses and from police officials. The injuries were entered in the specific columns of proforma. Data was analysed with MS Excel. RESULTS Death due to head injury is more in non-helmeted (52.5% compared to helmeted drivers (43.8 % whereas injury to chest and abdomen and limbs are more in helmeted. Combination of injuries (Head+Chest+Abdomen predominated in helmeted drivers (18.8% compared to 5% in non-helmeted drivers. Spinal injuries were more in helmeted than in non-helmeted. CONCLUSION The pattern of head injury was analysed in detail in helmeted and non-helmeted drivers. This will help in detailing of pattern of head injury in both groups.

  1. HElmet therapy Assessment in infants with Deformed Skulls (HEADS: protocol for a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    van Wijk Renske M

    2012-07-01

    Full Text Available Abstract Background In The Netherlands, helmet therapy is a commonly used treatment in infants with skull deformation (deformational plagiocephaly or deformational brachycephaly. However, evidence of the effectiveness of this treatment remains lacking. The HEADS study (HElmet therapy Assessment in Deformed Skulls aims to determine the effects and costs of helmet therapy compared to no helmet therapy in infants with moderate to severe skull deformation. Methods/design Pragmatic randomised controlled trial (RCT nested in a cohort study. The cohort study included infants with a positional preference and/or skull deformation at two to four months (first assessment. At 5 months of age, all children were assessed again and infants meeting the criteria for helmet therapy were asked to participate in the RCT. Participants were randomly allocated to either helmet therapy or no helmet therapy. Parents of eligible infants that do not agree with enrolment in the RCT were invited to stay enrolled for follow up in a non-randomisedrandomised controlled trial (nRCT; they were then free to make the decision to start helmet therapy or not. Follow-up assessments took place at 8, 12 and 24 months of age. The main outcome will be head shape at 24 months that is measured using plagiocephalometry. Secondary outcomes will be satisfaction of parents and professionals with the appearance of the child, parental concerns about the future, anxiety level and satisfaction with the treatment, motor development and quality of life of the infant. Finally, compliance and costs will also be determined. Discussion HEADS will be the first study presenting data from an RCT on the effectiveness of helmet therapy. Outcomes will be important for affected children and their parents, health care professionals and future treatment policies. Our findings are likely to influence the reimbursement policies of health insurance companies. Besides these health outcomes, we will be able to

  2. The effect of helmet use on injury severity and crash circumstances in skiers and snowboarders.

    Science.gov (United States)

    Hagel, Brent; Pless, I Barry; Goulet, Claude; Platt, Robert; Robitaille, Yvonne

    2005-01-01

    The aim of this study was to examine the effect of helmet use on non-head-neck injury severity and crash circumstances in skiers and snowboarders. We used a matched case-control study over the November 2001 to April 2002 winter season. 3295 of 4667 injured skiers and snowboarders reporting to the ski patrol at 19 areas in Quebec with non-head, non-neck injuries agreed to participate. Cases included those evacuated by ambulance, admitted to hospital, with restriction of normal daily activities (NDAs) >6 days, with non-helmet equipment damage, fast self-reported speed, participating on a more difficult run than usual, and jumping-related injury. Controls were injured participants without severe injuries or high-energy crash circumstances and were matched to cases on ski area, activity, day, age, and sex. Conditional logistic regression was used to relate each outcome to helmet use. There was no evidence that helmet use increased the risk of severe injury or high-energy crash circumstances. The results suggest that helmet use in skiing and snowboarding is not associated with riskier activities that lead to non-head-neck injuries.

  3. Public bike sharing in New York City: helmet use behavior patterns at 25 Citi Bike™ stations.

    Science.gov (United States)

    Basch, Corey H; Ethan, Danna; Zybert, Patricia; Afzaal, Sarah; Spillane, Michael; Basch, Charles E

    2015-06-01

    Urban public bicycle sharing programs are on the rise in the United States. Launched in 2013, NYC's public bicycle share program, Citi Bike™ is the fastest growing program of its kind in the nation, with nearly 100,000 members and more than 330 docking stations across Manhattan and Brooklyn. The purpose of this study was to assess helmet use behavior among Citi Bike™ riders at 25 of the busiest docking stations. The 25 Citi Bike™ Stations varied greatly in terms of usage: total number of cyclists (N = 96-342), commute versus recreation (22.9-79.5% commute time riders), weekday versus weekend (6.0-49.0% weekend riders). Helmet use ranged between 2.9 and 29.2% across sites (median = 7.5 %). A total of 4,919 cyclists were observed, of whom 545 (11.1%) were wearing helmets. Incoming cyclists were more likely to wear helmets than outgoing cyclists (11.0 vs 5.9%, p = .000). NYC's bike share program endorses helmet use, but relies on education to encourage it. Our data confirm that, to date, this strategy has not been successful.

  4. Effect of Filters on the Noise Generated by Continuous Positive Airway Pressure Delivered via a Helmet

    Directory of Open Access Journals (Sweden)

    Ricardo Hernández-Molina

    2017-01-01

    Full Text Available Introduction: One of the problems that the delivery of continuous positive airway pressure (CPAP via a helmet poses is the generation of noise. The objective of our study was to assess the effect that the use of filter has on sound pressure levels generated by the delivery of positive airway pressure at different gas flow rates. Materials and Methods: Sound pressure levels generated by neonatal helmet CPAP delivery were measured at different gas flows (20, 30, and 40 l/min with and without a breathing filter. Noise intensity was measured by installing microphones in the inner ear of dummy heads wearing helmets. Results: The sound pressure level increased by 38% at a gas flow of 40 l/min, as compared to a gas flow of 20 l/min {74 dBA [interquartile range (IQR 2,2] vs 52 dBA (IQR 5,9, respectively}. Using the breathing filter as a diffuser has a variety of effects on sound pressure levels according to the gas flow rate. Conclusion: The intensity of the noise generated by helmet delivery of positive airway pressure depends on the type of helmet used, gas flow, and use or not of a diffuser filter. Breathing filters with gas flows over 30 l/min might not be recommended since they would not attenuate but will rather amplify sound pressure.

  5. Head position in the MEG helmet affects the sensitivity to anterior sources.

    Science.gov (United States)

    Marinkovic, K; Cox, B; Reid, K; Halgren, E

    2004-11-30

    Current MEG instruments derive the whole-head coverage by utilizing a helmet-shaped opening at the bottom of the dewar. These helmets, however, are quite a bit larger than most people's heads so subjects commonly lean against the back wall of the helmet in order to maintain a steady position. In such cases the anterior brain sources may be too distant to be picked up by the sensors reliably. Potential "invisibility" of the frontal and anterior temporal sources may be particularly troublesome for the studies of cognition and language, as they are subserved significantly by these areas. We examined the sensitivity of the distributed anatomically-constrained MEG (aMEG) approach to the head position ("front" vs. "back") secured within a helmet with custom-tailored bite-bars during a lexical decision task. The anterior head position indeed resulted in much greater sensitivity to language-related activity in frontal and anterior temporal locations. These results emphasize the need to adjust the head position in the helmet in order to maximize the "visibility" of the sources in the anterior brain regions in cognitive and language tasks.

  6. Investigation of the reasons for not using helmet among motorcyclists in Kerman, Iran.

    Science.gov (United States)

    Maghsoudi, Aliasghar; Boostani, Dariush; Rafeiee, Manoochehr

    2018-03-01

    This study was carried out to investigate reasoning and interpretation of motorcyclists for not using helmet utilizing qualitative methodology of 'grounded theory'. The field of the study was Kerman, a cultural-historical city at the south-east of Iran. Participants were 21 young male motorcyclists. Two sampling strategies were used: maximum variation and snowball sampling. To collect data, in-depth, open-ended interviews were conducted. Data analysis yielded seven categories: fatalism; a barrier to social relationships; peer group pressure and negative labelling; messing up the appearance; disturbance in hearing and vision; barrier to normal breathing; and heaviness and superfluity of helmet. Based on the findings of the current study, it could be concluded that socio-cultural contexts, motorcyclists' worldview and partly helmet-related problems are of the main factors which affect motorcycling. Therefore, the studies, policy-makings, and intervening programmes to control injury and to promote safety among motorcyclists should be focused on socio-cultural barriers to helmet use in general and changing the motorcyclists' standpoints toward fatalism in particular. Helmet-related problems should be considered, too.

  7. Continuous positive airway pressure with helmet versus mask in infants with bronchiolitis: an RCT.

    Science.gov (United States)

    Chidini, Giovanna; Piastra, Marco; Marchesi, Tiziana; De Luca, Daniele; Napolitano, Luisa; Salvo, Ida; Wolfler, Andrea; Pelosi, Paolo; Damasco, Mirco; Conti, Giorgio; Calderini, Edoardo

    2015-04-01

    Noninvasive continuous positive airway pressure (CPAP) is usually applied with a nasal or facial mask to treat mild acute respiratory failure (ARF) in infants. A pediatric helmet has now been introduced in clinical practice to deliver CPAP. This study compared treatment failure rates during CPAP delivered by helmet or facial mask in infants with respiratory syncytial virus-induced ARF. In this multicenter randomized controlled trial, 30 infants with respiratory syncytial virus-induced ARF were randomized to receive CPAP by helmet (n = 17) or facial mask (n = 13). The primary endpoint was treatment failure rate (defined as due to intolerance or need for intubation). Secondary outcomes were CPAP application time, number of patients requiring sedation, and complications with each interface. Compared with the facial mask, CPAP by helmet had a lower treatment failure rate due to intolerance (3/17 [17%] vs 7/13 [54%], P = .009), and fewer infants required sedation (6/17 [35%] vs 13/13 [100%], P = .023); the intubation rates were similar. In successfully treated patients, CPAP resulted in better gas exchange and breathing pattern with both interfaces. No major complications due to the interfaces occurred, but CPAP by mask had higher rates of cutaneous sores and leaks. These findings confirm that CPAP delivered by helmet is better tolerated than CPAP delivered by facial mask and requires less sedation. In addition, it is safe to use and free from adverse events, even in a prolonged clinical setting. Copyright © 2015 by the American Academy of Pediatrics.

  8. On the series

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... http://www.ias.ac.in/article/fulltext/pmsc/115/04/0371-0381. Keywords. Inverse binomial series; hypergeometric series; polylogarithms; integral representations. Abstract. In this paper we investigate the series ∑ k = 1 ∞ ( 3 k k ) − 1 k − n x k . Obtaining some integral representations of them, we evaluated the ...

  9. Integrated approaches to miRNAs target definition: time-series analysis in an osteosarcoma differentiative model.

    Science.gov (United States)

    Grilli, A; Sciandra, M; Terracciano, M; Picci, P; Scotlandi, K

    2015-06-30

    microRNAs (miRs) are small non-coding RNAs involved in the fine regulation of several cellular processes by inhibiting their target genes at post-transcriptional level. Osteosarcoma (OS) is a tumor thought to be related to a molecular blockade of the normal process of osteoblast differentiation. The current paper explores temporal transcriptional modifications comparing an osteosarcoma cell line, Saos-2, and clones stably transfected with CD99, a molecule which was found to drive OS cells to terminally differentiate. Parental cell line and CD99 transfectants were cultured up to 14 days in differentiating medium. In this setting, OS cells were profiled by gene and miRNA expression arrays. Integration of gene and miRNA profiling was performed by both sequence complementarity and expression correlation. Further enrichment and network analyses were carried out to focus on the modulated pathways and on the interactions between transcriptome and miRNome. To track the temporal transcriptional modification, a PCA analysis with differentiated human MSC was performed. We identified a strong (about 80 %) gene down-modulation where reversion towards the osteoblast-like phenotype matches significant enrichment in TGFbeta signaling players like AKT1 and SMADs. In parallel, we observed the modulation of several cancer-related microRNAs like miR-34a, miR-26b or miR-378. To decipher their impact on the modified transcriptional program in CD99 cells, we correlated gene and microRNA time-series data miR-34a, in particular, was found to regulate a distinct subnetwork of genes with respect to the rest of the other differentially expressed miRs and it appeared to be the main mediator of several TGFbeta signaling genes at initial and middle phases of differentiation. Integration studies further highlighted the involvement of TGFbeta pathway in the differentiation of OS cells towards osteoblasts and its regulation by microRNAs. These data underline that the expression of miR-34a and down

  10. Determination of the 4 mm Gamma Knife helmet relative output factor using a variety of detectors

    International Nuclear Information System (INIS)

    Tsai, J.-S.; Rivard, Mark J.; Engler, Mark J.; Mignano, John E.; Wazer, David E.; Shucart, William A.

    2003-01-01

    Though the 4 mm Gamma Knife helmet is used routinely, there is disagreement in the Gamma Knife users community on the value of the 4 mm helmet relative output factor. A range of relative output factors is used, and this variation may impair observations of dose response and optimization of prescribed dose. To study this variation, measurements were performed using the following radiation detectors: silicon diode, diamond detector, radiographic film, radiochromic film, and TLD cubes. To facilitate positioning of the silicon diode and diamond detector, a three-dimensional translation micrometer was used to iteratively determine the position of maximum detector response. Positioning of the films and TLDs was accomplished by manufacturing custom holders for each technique. Results from all five measurement techniques indicate that the 4 mm helmet relative output factor is 0.868±0.014. Within the experimental uncertainties, this value is in good agreement with results obtained by other investigators using diverse techniques

  11. The burden of motorcycle-related neuro-trauma in Ireland and associated helmet usage.

    LENUS (Irish Health Repository)

    Murphy, R K J

    2009-04-01

    Motorcycles represent less than 2% of the licensed vehicles but motorcyclists account for 12% of road deaths in Ireland. The British Road Safety Authority has introduced the Sharp programme, which hopes to save 50 lives in the U.K. each year alone by helping riders to choose the best-fitting and safest helmets. We evaluated the pattern of head injuries sustained by motorcyclists referred to the two neurosurgical centres Beaumont Hospital and Cork University Hospital in Ireland and ascertained if the new SHARP guidelines could be of benefit in reducing the burden of motorcycle related neurotrauma and disability in Ireland. Despite Ireland having mandatory helmet laws almost a quarter of our motorcyclists with traumatic brain injury were unhelmeted. A significant reduction in mortality and morbidity is predicted if all motorcyclists in Ireland were to wear helmets that satisfied the SHARP criteria.

  12. The Association Between Risk-taking Behavior and Helmet Use Among Motorcyclist

    Science.gov (United States)

    Trinh, Tu Anh; Phuong Linh Le, Thi

    2018-04-01

    The central aim of the research was to examine speeding behavior without helmet wearing among motorcycle riders in Ho Chi Minh City. The research model expanded the Theory of Planned Behavior by both psychological flow theory and sensation-seeking. 268 motorcyclists were involved in the research. A Confirmatory factor analysis and a Structural equation modeling were employed for model specification. The findings indicated a significant effect between predictors and the intention of speeding without helmet wearing. In addition, there was direct relation between intention and actual behavior. Also, sensation-seeking proved to be important in moderating predictors between the low-sensation-seeking motorcyclists and high-sensation-seeking ones. A deeper understanding of why motorcycle riders exceed the speed limit without wearing helmet played key role in changing their behavior.

  13. Feasibility of nitric oxide administration by neonatal helmet-CPAP: a bench study.

    Science.gov (United States)

    Trevisanuto, Daniele; Doglioni, Nicoletta; Micaglio, Massimo; Zanardo, Vincenzo

    2007-09-01

    Inhaled nitric oxide (NO) may have a role in the treatment of preterm infants with respiratory failure. We evaluated the feasibility of administering NO therapy by a new continuous positive airway pressure (CPAP) system (neonatal helmet-CPAP). While maintaining a constant total flow of 8, 10, and 12 l.min(-1), NO concentrations were progressively increased to 5, 10, 20, and 40 p.p.m. in the neonatal helmet-CPAP pressure chamber (5 cmH2O). NO, NO2, and O2 concentrations were measured in the pressure chamber and the immediate external environment. In the chamber, NO2 levels remained low (neonatal helmet-CPAP system. This method allows the delivery of accurate NO levels and high O2 concentrations avoiding NO2 accumulation. Further experimental and clinical studies are needed.

  14. Bikes, helmets, and public health: decision-making when goods collide.

    Science.gov (United States)

    Bateman-House, Alison

    2014-06-01

    How ought public officials address policy choices that entail trade-offs between desirable public health goods? Increasing cycling improves public health both by promoting physical activity and by decreasing vehicle use, thus reducing vehicular emissions. Proponents of bicycle helmets argue that, used properly, they protect individual cyclists; however, there is concern that mandating helmet use may result in a decrease in cycling. In 2012, New York City Mayor Michael Bloomberg opposed a bicycle helmet mandate, concerned that it would have a negative impact on the city's cycling rate, which he had sought to increase. The mayor did not explain his rationale, leaving constituents unsure why he opposed the proposal. This case study underscores the challenge of creating public policy in the context of competing public health goods.

  15. Defining Constellation Suit Helmet Field of View Requirements Employing a Mission Segment Based Reduction Process

    Science.gov (United States)

    McFarland, Shane

    2009-01-01

    Field of view has always been a design feature paramount to helmets, and in particular space suits, where the helmet must provide an adequate field of view for a large range of activities, environments, and body positions. For Project Constellation, a different approach to helmet requirement maturation was utilized; one that was less a direct function of body position and suit pressure and more a function of the mission segment in which the field of view will be required. Through taxonimization of various parameters that affect suited field of view, as well as consideration for possible nominal and contingency operations during that mission segment, a reduction process was employed to condense the large number of possible outcomes to only six unique field of view angle requirements that still captured all necessary variables while sacrificing minimal fidelity.

  16. Helmet "tang" from the Metropolitan Museum of Art (New York City, United States. Features of Construction, Design and Operational Use

    Directory of Open Access Journals (Sweden)

    Leonid A. Bobrov

    2016-12-01

    Full Text Available The article discusses iron helmet (No. 36.25.115, which is stored in the Metropolitan Museum of art (New York City, United States. For the first time this helmet was published and analyzed by American scientists G. C. Stone and D.G. Alexander. The analysis showed that the Bowl was made by Turkish masters of the XVII century and backplate and the hoop is added to the helmet in 1781–1782 D.G. Alexander speculated that the helmet belonged to the Warrior of the Crimean Khanate. Dating the helmet does not raise objections. However, the attribution of a helmet requires some clarification. Analysis of the design of the helmet and decoration revealed that backplate, hoop and Aventail from iron rings added to Bowl in 1781–1782, were manufactured by Circassian craftsmen living in the Northern Caucasus or in Crimea. For the decoration of the helmet has been used typical Circassian ornaments: "sieve", cherkessian floral pattern, geometric shapes, triangular in shape, "gear", etc. During Assembly of the helmet were applied characteristic of Circassian gunsmiths technological solutions: using as a basis the bowl old-style helmet, tapered Finial with a ring for a decorative plume, hoop with four plates, ringed with aventail lip to protect the forehead, etc. In Circassia similar headgear worn were known as tang (from the Arabic. "Taj", i.e., the "Crown". In the XVII–XVIII centuries. they willingly purchased representatives of Crimean Tatar nobility. Similar in design and system design helmets Circassian production belonged to the highest aristocracy of the Crimean Khanate, are stored in Museum and private collections in Poland, Turkey and the United States. The inscription "Bekmurun" on the hoop from the Metropolitan helmet suggests that it was manufactured on request of Kabardian Bekmur princely heir (Bekmurziny, which moved from Circassia in Crimea, 1737. The popularity of tang type helmets among the aristocracy of North Caucasus and Crimea were due not

  17. Impact of helmet use on traumatic brain injury from road traffic accidents in Cambodia.

    Science.gov (United States)

    Gupta, Saksham; Klaric, Katherine; Sam, Nang; Din, Vuthy; Juschkewitz, Tina; Iv, Vycheth; Shrime, Mark G; Park, Kee B

    2018-01-02

    Rapid urbanization and motorization without corresponding increases in helmet usage have made traumatic brain injury due to road traffic accidents a major public health crisis in Cambodia. This analysis was conducted to quantify the impact of helmets on severity of injury, neurosurgical indication, and functional outcomes at discharge for motorcycle operators who required hospitalization for a traumatic brain injury following a road traffic accident in Cambodia. The medical records of 491 motorcycle operators who presented to a major tertiary care center in Cambodia with traumatic brain injury were retrospectively analyzed using multivariate logistic regression. The most common injuries at presentation were contusions (47.0%), epidural hematomas (30.1%), subdural hematomas (27.9%), subarachnoid hemorrhages (12.4%), skull fractures (21.4%), and facial fractures (18.5%). Moderate-to-severe loss of consciousness was present in 36.3% of patients. Not wearing a helmet was associated with an odds ratio of 2.20 (95% confidence interval [CI], 1.15-4.22) for presenting with moderate to severe loss of consciousness compared to helmeted patients. Craniotomy or craniectomy was indicated for evacuation of hematoma in 20.0% of cases, and nonhelmeted patients had 3.21-fold higher odds of requiring neurosurgical intervention (95% CI, 1.25-8.27). Furthermore, lack of helmet usage was associated with 2.72-fold higher odds of discharge with functional deficits (95% CI, 1.14-6.49). In total, 30.1% of patients were discharged with severe functional deficits. Helmets demonstrate a protective effect and may be an effective public health intervention to significantly reduce the burden of traumatic brain injury in Cambodia and other developing countries with increasing rates of motorization across the world.

  18. Head and face injuries and helmet use among injured motorcyclists with road accidents in Isfahan, Iran

    Directory of Open Access Journals (Sweden)

    Azam Dadkhah

    2015-10-01

    Full Text Available BACKGROUND AND AIM: The study aimed to assess the frequency of head and face injuries in motorcyclists who had an accident and to find out the relationship between helmet use and frequency of these injuries. METHODS: A cross-sectional study with multi-stage sampling method provides data on the injured motorcyclists with road accidents. Data came from a registration form which has documented information of each injured person who had a road accident and hospitalized in the biggest hospital of Isfahan University of Medical Sciences, Iran (Al-Zahra. All the registration forms were surveyed for hospitalization period, treatment costs, severity of injury, and date of accident during 2010 (n = 1626. Later, among the list of injured motorcyclists during the last 3 months of the registration form, 125 cases were randomly selected and interviewed by phone regarding occurrence of the head and face injuries and whether wearing helmet during the accident. Confidence intervals (CI, Chi-square, and Phi and Cramer’s correlation coefficient were applied. The ethical approval was provided. RESULTS: Accident by motorcycle was 31.0% of all road accidents. The frequency of motorcycle accidents was higher in the autumn and among 21-25 year olds. The mean period of hospitalization was 4.3 days and the mean of hospital costs was about 9000000 Rials [about 8200 United States dollar (USD, in 2010]. Of motorcyclist, 35.0% reported they were helmeted when they had the accident. The frequency of head and face injuries was 51.0% among all the injured motorcyclists, 22.0% and 78.0% among the helmeted and non-helmeted motorcyclists, respectively (P = 0.009, r = -0.267. CONCLUSION: Motorcycle accidents comprise a large number of road accidents and cause substantial morbidity and financial impact for the community members. Head and face injuries are the most common trauma in motorcyclists, and the injury rate is higher among non-helmeted motorcyclists.

  19. GIS integration of the 1:75,000 Romanian topographic map series from the World War I

    Science.gov (United States)

    Timár, G.; Mugnier, C. J.

    2009-04-01

    During the WWI, the Kingdom of Romania developed a 1:75,000 topographic map series, covering not only the actual territory of the country (the former Danube Principalities and Dobrogea) but also Bessarabia (now the Republic of Moldova), which was under Russian rule. The map sheets were issued between 1914 and 1917. The whole map consists of two zones; Columns A-F are the western zone, while Columns G-Q are belonging to the eastern one. To integrate the scanned map sheets to a geographic information system (GIS), the parameters of the map projection and the geodetic datum should be defined as well as the sheet labelling system. The sheets have no grid lines indicated; most of them have latitude and longitude lines but some of them have no coordinate descriptions. The sheets, however, can be rectified using their four corners as virtual control points, and using the following grid and datum parameters: Eastern zone: • Projection type: Bonne. • Projection center: latitude=46d 30m; longitude=27d 20m 13.35s (from Greenwich). • Base ellipsoid: Bessel 1841 • Datum parameters (from local to WGS84): dX=+875 m; dY=-119 m; dZ=+313 m. • Sheet size: 40*40 kilometers, projection center is the NW corner of the 779 (Column L; Row VII) sheet. Western zone: • Projection type: Bonne. • Projection center: latitude=45d; longitude=26d 6m 41.18s (from Greenwich); • Base ellipsoid: Bessel 1841 • Datum parameters (from local to WGS84): dX=+793 m; dY=+364 m; dZ=+173 m. • Sheet size: 0.6*0.4 grad (new degrees), except Column F, which is wider to east to fill the territory to the zone boundary. In Columns E and F geographic coordinates are indicated in new degrees, with the prime meridian of Bucharest. Apart from the system of columns and rows, each sheet has its own label of three or four digit. The last two digit correspond to the column number (69 for Column A going up to 84 for Column Q) while the first digit(s) refer directly to row number (1-15). During the

  20. Optimisation of energy absorbing liner for equestrian helmets. Part II: Functionally graded foam liner

    International Nuclear Information System (INIS)

    Cui, L.; Forero Rueda, M.A.; Gilchrist, M.D.

    2009-01-01

    The energy absorbing liner of safety helmets was optimised using finite element modelling. In this present paper, a functionally graded foam (FGF) liner was modelled, while keeping the average liner density the same as in a corresponding reference single uniform density liner model. Use of a functionally graded foam liner would eliminate issues regarding delamination and crack propagation between interfaces of different density layers which could arise in liners with discrete density variations. As in our companion Part I paper [Forero Rueda MA, Cui L, Gilchrist MD. Optimisation of energy absorbing liner for equestrian helmets. Part I: Layered foam liner. Mater Des [submitted for publication

  1. Development of a helmet-mounted PLZT thermal/flash protection system

    International Nuclear Information System (INIS)

    Harris, J.O. Jr.; Cutchen, J.T.; Pfoff, B.J.

    1976-01-01

    Sandia Laboratories is developing PLZT thermal/flash protective devices (TFPD's) goggles to prevent exposure and resultant eye damage from nuclear weapon detonations. The primary emphasis of the present program is to transfer technology and establish production capability for helmet-mounted PLZT/TFPD goggles for USAF flight crews, with a non-helmet-mounted configuration to follow. The first production units are anticipated in the fall of 1977. The operating principles of the PLZT/TFPD goggle device are briefly outlined, and the device configuration and operational characteristics are described

  2. The differences between storms driven by helmet streamer CIRs and storms driven by pseudostreamer CIRs

    OpenAIRE

    Borovsky, Joseph E.; Denton, Michael

    2013-01-01

    A corotating interaction region (CIR) is formed when fast coronal hole origin solar wind overtakes slow solar wind and forms a region of compressed plasma and magnetic field. The slow wind upstream of the coronal hole fast wind can be either of helmet streamer origin or pseudostreamer origin. For a collection of 125 CIR-driven geomagnetic storms, the slow wind ahead of each CIR is examined; for those storm not containing ejecta, each CIR is categorized as a helmet streamer CIR (74 of the 125 ...

  3. Examination of factors associated with use rates after transition from a universal to partial motorcycle helmet use law.

    Science.gov (United States)

    Russo, Brendan J; Barrette, Timothy P; Morden, Jeffery; Savolainen, Peter T; Gates, Timothy J

    2017-01-02

    Motorcycle riders account for a disproportionately high number of traffic injuries and fatalities compared to occupants of other vehicle types. Though research has demonstrated the benefits of helmet use in preventing serious and fatal injuries in the event of a crash, helmet use has remained relatively stable in the United States, where the most recent national estimates show a 64% use rate. Use rates have been markedly lower among those states that do not have a universal helmet law for all riders. In 2012, the state of Michigan repealed its longstanding mandatory helmet use law. In order to gain insights as to the effects of this legislative change, a study was conducted to examine short-term changes in helmet use and identify factors associated with use rates. A statewide direct observation survey was conducted 1 year after the transition from a universal helmet law to a partial helmet law. A random parameters logistic regression model was estimated to identify motorcyclist, roadway, and environmental characteristics associated with helmet use. This modeling framework accounts for both intravehicle correlation (between riders and passengers on the same motorcycle) as well as unobserved heterogeneity across riders due to important unobserved factors. Helmet use was shown to vary across demographic segments of the motorcyclist population. Use rates were higher among Caucasian riders, as well as among those age 60 and above. No significant difference was observed between male and female riders. Use was also found to vary geographically, temporally, and with respect to various environmental characteristics. Geographically, helmet use rates tended to be correlated with historical restraint use trends, which may be reflective of riding environment and general differences in the riding population. To this end, rates were also highly variable based upon the type of motorcycle and whether the motorcyclist was wearing high-visibility gear. The study results demonstrate

  4. The Ability of American Football Helmets to Manage Linear Acceleration With Repeated High-Energy Impacts.

    Science.gov (United States)

    Cournoyer, Janie; Post, Andrew; Rousseau, Philippe; Hoshizaki, Blaine

    2016-03-01

    Football players can receive up to 1400 head impacts per season, averaging 6.3 impacts per practice and 14.3 impacts per game. A decrease in the capacity of a helmet to manage linear acceleration with multiple impacts could increase the risk of traumatic brain injury. To investigate the ability of football helmets to manage linear acceleration with multiple high-energy impacts. Descriptive laboratory study. Laboratory. We collected linear-acceleration data for 100 impacts at 6 locations on 4 helmets of different models currently used in football. Impacts 11 to 20 were compared with impacts 91 to 100 for each of the 6 locations. Linear acceleration was greater after multiple impacts (91-100) than after the first few impacts (11-20) for the front, front-boss, rear, and top locations. However, these differences are not clinically relevant as they do not affect the risk for head injury. American football helmet performance deteriorated with multiple impacts, but this is unlikely to be a factor in head-injury causation during a game or over a season.

  5. X-ray, synchrotron, and neutron diffraction analysis of Roman cavalry parade helmet fragment

    Czech Academy of Sciences Publication Activity Database

    Smrcok, L.; Petrik, I.; Langer, V.; Filinchuk, Y.; Beran, Přemysl

    2010-01-01

    Roč. 45, č. 10 (2010), s. 1025-1031 ISSN 0232-1300 Institutional research plan: CEZ:AV0Z10480505 Keywords : archaeometry * Roman helmet * phase analysis Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 0.946, year: 2010

  6. Impact of Helmet Use on Severity of Epidural Hematomas in Cambodia.

    Science.gov (United States)

    Gupta, Saksham; Iv, Vycheth; Sam, Nang; Vuthy, Din; Klaric, Katherine; Shrime, Mark G; Park, Kee B

    2017-04-01

    Traumatic brain injury is a major cause of morbidity and mortality worldwide, often necessitating neurosurgical intervention to evacuate intracranial bleeding. Since the early 2000s, Cambodia has been undergoing a rapid increase in motorcycle transit and in road traffic accidents, but the prevalence of helmet usage remains low. Epidural hematomas are severe traumatic brain injuries that can necessitate neurosurgical intervention. This is a retrospective cohort study of patients with epidural hematoma secondary to motorcycle accidents who presented to a major national tertiary care center in Phnom Penh, Cambodia, between November 2013 and March 2016. All patients were diagnosed with computed tomography of the head. In this cohort, 21.6% of patients in motorcycle accidents presented with epidural hematoma and 89.1% of patients were men, 47.6% were intoxicated, and were 87.8% were not wearing helmets at the moment of impact. Not wearing a helmet was associated with a 6.90-fold increase in odds of presenting with a moderate-to-severe Glasgow coma scale score and a 3.76-fold increase in odds of requiring craniotomy or craniectomy for evacuation of hematoma. Male sex was also associated with increased odds of higher clinical severity at presentation and indication for craniotomy or craniectomy, and alcohol intoxication at the time of accident was not associated with either. Helmet usage is protective in reducing the severity of presentation and need for neurosurgical intervention for patients with epidural hematoma secondary to motorcycle accidents. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Influence of humidification on comfort during noninvasive ventilation with a helmet.

    Science.gov (United States)

    Ueta, Kazuyoshi; Tomita, Toshiji; Uchiyama, Akinori; Ohta, Noriyuki; Iguchi, Naoya; Goto, Yukiko; Fujino, Yuji

    2013-05-01

    To evaluate optimal humidifier water temperature when using a helmet for noninvasive ventilation. Twenty-eight healthy individuals underwent 8 cm H2O CPAP ventilation with FIO2 of 0.21 and 0.5. Each was sequentially tested in the following order: using the helmet without humidification at ambient temperature; with humidification with unheated chamber water; and with humidification with the chamber water at 31°C, 34°C, and 37°C. At each setting, after a 20 min stabilization period, measurements were taken. Comfort level at each setting was evaluated using a visual analog scale rated zero (least comfortable) to 10 (most comfortable). Temperature and relative and absolute humidity inside the helmet increased; however, the comfort scores significantly decreased as the humidification chamber water temperature increased. Regardless of the FIO2, statistically significantly highest comfort scores were obtained when humidification water, with and without active humidification, was at ambient temperature. Unacceptable absolute humidity was obtained only without humidification at room temperature when FIO2 was 0.5. With the clinical use of a helmet, for patient comfort and mucosal humidification during CPAP, the most desirable conditions are likely to be obtained by humidifying without heating, that is by leaving the water in the humidifier chamber at room temperature.

  8. Randomized Comparison of Helmet CPAP Versus High-Flow Nasal Cannula Oxygen in Pediatric Respiratory Distress.

    Science.gov (United States)

    Vitaliti, Giovanna; Vitaliti, Maria Concetta; Finocchiaro, Maria Carla; Di Stefano, Vita Antonella; Pavone, Piero; Matin, Nassim; Motamed-Gorji, Nazgol; Lubrano, Riccardo; Falsaperla, Raffaele

    2017-08-01

    The current study aimed to compare the efficacy and safety of 2 noninvasive respiratory support methods, which included helmet CPAP and high-flow nasal cannula (HFNC) in children with respiratory distress admitted to a pediatric intermediate care unit. This study was a prospective observational study conducted on children with respiratory distress (age 1-24 months) who were admitted to our acute and emergency operative unit. All included subjects were randomly treated with helmet CPAP or HFNC in a 1:1 fashion until their clinical picture, oxygen saturation, and arterial blood gas (ABG) parameters resolved. The efficiencies of helmet CPAP and HFNC were evaluated by breathing frequency, S pO 2 , ABG pH, ABG P aCO 2 , ABG P aO 2 , and P aO 2 /F IO 2 , recorded once at baseline and then after 1 and 6 h of treatment. Both noninvasive respiratory support modalities were compared with a control group of subjects with respiratory distress under standard therapeutic pharmaceutical protocols. We found that both helmet CPAP and HFNC were efficient in improving the clinical conditions of subjects with mild-to-moderate respiratory distress, although clinical response to helmet CPAP was more efficient and rapid compared with HFNC. Children who received respiratory support had a better clinical course in terms of hospitalization, days of intravenous rehydration therapy, and days of drug administration compared with the control group ( P CPAP and HFNC in respiratory distress resolution in a pediatric intermediate care setting. It aims to identify the most efficient treatment to avoid pediatric ICU admissions and endotracheal intubation and reduce the administration of drugs and days of hospitalization. Copyright © 2017 by Daedalus Enterprises.

  9. Integrating field plots, lidar, and landsat time series to provide temporally consistent annual estimates of biomass from 1990 to present

    Science.gov (United States)

    Warren B. Cohen; Hans-Erik Andersen; Sean P. Healey; Gretchen G. Moisen; Todd A. Schroeder; Christopher W. Woodall; Grant M. Domke; Zhiqiang Yang; Robert E. Kennedy; Stephen V. Stehman; Curtis Woodcock; Jim Vogelmann; Zhe Zhu; Chengquan. Huang

    2015-01-01

    We are developing a system that provides temporally consistent biomass estimates for national greenhouse gas inventory reporting to the United Nations Framework Convention on Climate Change. Our model-assisted estimation framework relies on remote sensing to scale from plot measurements to lidar strip samples, to Landsat time series-based maps. As a demonstration, new...

  10. The physiology analysis system: an integrated approach for warehousing, management and analysis of time-series physiology data.

    Science.gov (United States)

    McKenna, Thomas M; Bawa, Gagandeep; Kumar, Kamal; Reifman, Jaques

    2007-04-01

    The physiology analysis system (PAS) was developed as a resource to support the efficient warehousing, management, and analysis of physiology data, particularly, continuous time-series data that may be extensive, of variable quality, and distributed across many files. The PAS incorporates time-series data collected by many types of data-acquisition devices, and it is designed to free users from data management burdens. This Web-based system allows both discrete (attribute) and time-series (ordered) data to be manipulated, visualized, and analyzed via a client's Web browser. All processes occur on a server, so that the client does not have to download data or any application programs, and the PAS is independent of the client's computer operating system. The PAS contains a library of functions, written in different computer languages that the client can add to and use to perform specific data operations. Functions from the library are sequentially inserted into a function chain-based logical structure to construct sophisticated data operators from simple function building blocks, affording ad hoc query and analysis of time-series data. These features support advanced mining of physiology data.

  11. An intelligent system and a relational data base for codifying helmet-mounted display symbology design requirements

    Science.gov (United States)

    Rogers, Steven P.; Hamilton, David B.

    1994-06-01

    To employ the most readily comprehensible presentation methods and symbology with helmet-mounted displays (HMDs), it is critical to identify the information elements needed to perform each pilot function and to analytically determine the attributes of these elements. The extensive analyses of mission requirements currently performed for pilot-vehicle interface design can be aided and improved by the new capabilities of intelligent systems and relational databases. An intelligent system, named ACIDTEST, has been developed specifically for organizing and applying rules to identify the best display modalities, locations, and formats. The primary objectives of the ACIDTEST system are to provide rapid accessibility to pertinent display research data, to integrate guidelines from many disciplines and identify conflicts among these guidelines, to force a consistent display approach among the design team members, and to serve as an 'audit trail' of design decisions and justifications. A powerful relational database called TAWL ORDIR has been developed to document information requirements and attributes for use by ACIDTEST as well as to greatly augment the applicability of mission analysis data. TAWL ORDIR can be used to rapidly reorganize mission analysis data components for study, perform commonality analyses for groups of tasks, determine the information content requirement for tailored display modes, and identify symbology integration opportunities.

  12. Effects of Videogame Distraction using a Virtual Reality Type Head-Mounted Display Helmet on Cold Pressor Pain in Children

    OpenAIRE

    Dahlquist, Lynnda M.; Weiss, Karen E.; Dillinger Clendaniel, Lindsay; Law, Emily F.; Ackerman, Claire Sonntag; McKenna, Kristine D.

    2008-01-01

    Objective To test whether a head-mounted display helmet enhances the effectiveness of videogame distraction for children experiencing cold pressor pain. Method Forty-one children, aged 6–14 years, underwent one or two baseline cold pressor trials followed by two distraction trials in which they played the same videogame with and without the helmet in counterbalanced order. Pain threshold (elapsed time until the child reported pain) and pain tolerance (total time the child kept the hand submer...

  13. Integrating a Linear Signal Model with Groundwater and Rainfall time-series on the Characteristic Identification of Groundwater Systems

    Science.gov (United States)

    Chen, Yu-Wen; Wang, Yetmen; Chang, Liang-Cheng

    2017-04-01

    Groundwater resources play a vital role on regional supply. To avoid irreversible environmental impact such as land subsidence, the characteristic identification of groundwater system is crucial before sustainable management of groundwater resource. This study proposes a signal process approach to identify the character of groundwater systems based on long-time hydrologic observations include groundwater level and rainfall. The study process contains two steps. First, a linear signal model (LSM) is constructed and calibrated to simulate the variation of underground hydrology based on the time series of groundwater levels and rainfall. The mass balance equation of the proposed LSM contains three major terms contain net rate of horizontal exchange, rate of rainfall recharge and rate of pumpage and four parameters are required to calibrate. Because reliable records of pumpage is rare, the time-variant groundwater amplitudes of daily frequency (P ) calculated by STFT are assumed as linear indicators of puamage instead of pumpage records. Time series obtained from 39 observation wells and 50 rainfall stations in and around the study area, Pintung Plain, are paired for model construction. Second, the well-calibrated parameters of the linear signal model can be used to interpret the characteristic of groundwater system. For example, the rainfall recharge coefficient (γ) means the transform ratio between rainfall intention and groundwater level raise. The area around the observation well with higher γ means that the saturated zone here is easily affected by rainfall events and the material of unsaturated zone might be gravel or coarse sand with high infiltration ratio. Considering the spatial distribution of γ, the values of γ decrease from the upstream to the downstream of major rivers and also are correlated to the spatial distribution of grain size of surface soil. Via the time-series of groundwater levels and rainfall, the well-calibrated parameters of LSM have

  14. Effective Integration of Technology and Instruction. Q&A with Michael Jay. REL Mid-Atlantic Educator Effectiveness Webinar Series

    Science.gov (United States)

    Regional Educational Laboratory Mid-Atlantic, 2015

    2015-01-01

    In this webinar, long-time educator and developer of education technology Michael Jay discussed the importance of using technology to support learning and gave examples of how teachers can integrate technology into their instruction based on the Common Core State Standards and the Next Generation Science Standards. The PowerPoint presentation and…

  15. Student Collaboration in a Series of Integrated Experiments to Study Enzyme Reactor Modeling with Immobilized Cell-Based Invertase

    Science.gov (United States)

    Taipa, M. A^ngela; Azevedo, Ana M.; Grilo, Anto´nio L.; Couto, Pedro T.; Ferreira, Filipe A. G.; Fortuna, Ana R. M.; Pinto, Ine^s F.; Santos, Rafael M.; Santos, Susana B.

    2015-01-01

    An integrative laboratory study addressing fundamentals of enzyme catalysis and their application to reactors operation and modeling is presented. Invertase, a ß-fructofuranosidase that catalyses the hydrolysis of sucrose, is used as the model enzyme at optimal conditions (pH 4.5 and 45 °C). The experimental work involves 3 h of laboratory time…

  16. Influence of socioeconomic status on the effectiveness of bicycle helmet legislation for children: a prospective observational study.

    Science.gov (United States)

    Parkin, Patricia C; Khambalia, Amina; Kmet, Leanne; Macarthur, Colin

    2003-09-01

    To evaluate the influence of average family income in a geographic area on the effectiveness of helmet legislation on observed helmet use by children (5-14 years). The study was conducted in East York, a health district of Metropolitan Toronto, in collaboration with the East York Health Unit. In 1996, the total population was 107 822, 11 340 of which were children 5 to 14 years. Census data were used to group the 21 census tracts in East York into 7 geographically distinct areas. The boundaries of these areas are natural barriers to travel, such as expressways, ravines, railway tracks, and hydroelectric power lines. The areas were also ranked according to average family income (based on Statistics Canada data). For analytical purposes, areas were defined as low-, mid-, and high-income areas. Census data profiles of the areas have been previously described. For each consecutive year from 1990 to 1997 inclusive, direct observations of children riding bicycles in East York during the months of April through October were made. In 1995, observations were completed before the introduction of the law on October 1, 1995. Only children who were between 5 and 14 years of age and riding a 2-wheeled bicycle were included in the study. In total, 111 sites across all 7 areas were selected for observation. Observational sites included school yards of all elementary and middle schools (kindergarten to grade 8) and all parks in East York. In addition, 5 major intersections and 5 residential streets from each area were randomly selected. Observers were trained and used a standardized data collection form. A pilot study showed that the data collected by observers were reliable and valid. Observers remained at each site for 1 hour and collected data on helmet use and sex. Ethical approval for the study was obtained from the Hospital for Sick Children Research Ethics Board, the East York Board of Education, and the Metropolitan Separate School Board. The proportion of children who were

  17. Motorcycle helmet type and the risk of head injury and neck injury during motorcycle collisions in California.

    Science.gov (United States)

    Erhardt, Taryn; Rice, Thomas; Troszak, Lara; Zhu, Motao

    2016-01-01

    The use of novelty motorcycle helmets is often prompted by beliefs that wearing a standard helmet can contribute to neck injury during traffic collisions. The goal of this analysis was to examine the association between helmet type and neck injury risk and the association between helmet type and head injury. Data were collected during the investigation of motorcycle collisions of any injury severity by the California Highway Patrol (CHP) and 83 local law enforcement agencies in California between June 2012 and July 2013. We estimated head injury and neck injury risk ratios from data on 7051 collision-involved motorcyclists using log-binomial regression. Helmet type was strongly associated with head injury occurrence but was not associated with the occurrence of neck injury. Rider age, rider alcohol use, and motorcycle speed were strong, positive predictors of both head and neck injury. Interventions to improve motorcycle helmet choice and to counteract misplaced concerns surrounding neck injury risk are likely to lead to reductions in head injury, brain injury, and death. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Material property determination of the lining layers of a versatile helmet

    Directory of Open Access Journals (Sweden)

    Kottner Radek

    2018-01-01

    Full Text Available This paper deals with material property identification of a helmet lining consisting of an outer layer of an expanded polystyrene (EPS and inner layer of an open-closed cell foam (OCCF. A combined numerical simulation and experimental testing was used for the material property identification. Compression and drop tests were performed. The ABAQUS finite element commercial code was used for numerical simulations in which the OOCF was modelled as a rate dependent viscoelastic material, while the EPS as a crushable foam. The reaction force time histories coming from the numerical simulation and the experiment have been used as a criterion for material parameter determination. After the identification of the material properties, numerical drop-tests were used to study the behaviour of a plate and a conical composite OOCF and EPS liners to decide which of them suits more for the helmet.

  19. Factors associated with the enactment of safety belt and motorcycle helmet laws.

    Science.gov (United States)

    Law, Teik Hua; Noland, Robert B; Evans, Andrew W

    2013-07-01

    It has been shown that road safety laws, such as motorcycle helmet and safety belt laws, have a significant effect in reducing road fatalities. Although an expanding body of literature has documented the effects of these laws on road safety, it remains unclear which factors influence the likelihood that these laws are enacted. This study attempts to identify the factors that influence the decision to enact safety belt and motorcycle helmet laws. Using panel data from 31 countries between 1963 and 2002, our results reveal that increased democracy, education level, per capita income, political stability, and more equitable income distribution within a country are associated with the enactment of road safety laws. © 2012 Society for Risk Analysis.

  20. Predictions of Helmet Pad Suspension System Performance using Isolated Pad Impact Results

    Science.gov (United States)

    2010-09-13

    Equation 2 and Equation 3, respectively. 3. METHOD The primary method of data collection for this report is detailed in the 2008 Joint Live Fire ...tests and the helmet system tests (see Figure 3). All testing was performed with a monorail drop tower (see Figure 4) at three conditioning...right) and system test setup (right and center left) Figure 5. MEP monorail drop test setup with a hemispherical impactor (left and center left

  1. Comparison of an in-helmet temperature monitor system to rectal temperature during exercise.

    Science.gov (United States)

    Wickwire, P Jason; Buresh, Robert J; Tis, Laurie L; Collins, Mitchell A; Jacobs, Robert D; Bell, Marla M

    2012-01-01

    Body temperature monitoring is crucial in helping to decrease the amount and severity of heat illnesses; however, a practical method of monitoring temperature is lacking. In response to the lack of a practical method of monitoring the temperature of athletes, Hothead Technologies developed a device (HOT), which continuously monitors an athlete's fluctuations in body temperature. HOT measures forehead temperature inside helmets. The purpose of this study was to compare HOT against rectal temperature (Trec). Male volunteers (n = 29, age = 23.5 ± 4.5 years, weight = 83.8 ± 10.4 kg, height = 180.1 ± 5.8 cm, body fat = 12.3 ± 4.5%) exercised on a treadmill at an intensity of 60-75% heart rate reserve (HRR) (wet bulb globe temperature [WBGT] = 28.7° C) until Trec reached 38.7° C. The correlation between Trec and HOT was 0.801 (R = 0.64, standard error of the estimate (SEE) = 0.25, p = 0.00). One reason for this relatively high correlation is the microclimate that HOT is monitoring. HOT is not affected by the external climate greatly because of its location in the helmet. Therefore, factors such as evaporation do not alter HOT temperature to a great degree. HOT was compared with Trec in a controlled setting, and the exercise used in this study was moderate aerobic exercise, very unlike that used in football. In a controlled laboratory setting, the relationship between HOT and Trec showed favorable correlations. However, in applied settings, helmets are repeatedly removed and replaced forcing HOT to equilibrate to forehead temperature every time the helmet is replaced. Therefore, future studies are needed to mimic how HOT will be used in field situations.

  2. The physiological demands of horseback mustering when wearing an equestrian helmet.

    Science.gov (United States)

    Taylor, Nigel A S; Caldwell, Joanne N; Dyer, Rodd

    2008-09-01

    The hottest months on northern Australian cattle stations are from September to November, and it is during these months that horseback cattle mustering occurs. Stockmen wear clothing that restricts heat loss, and protective helmets have recently been introduced. Anecdotal evidence points to the possibility that helmets may increase the probability of developing heat illness, or reducing workplace performance. In this project, we quantified the working (thermal) environment on such cattle stations, and measured the metabolic demands on, and concurrent physiological strain in stockmen during mustering, whilst wearing an equestrian helmet. During horseback work, the average heart rate was 102.0 beats min(-1) (SD 14.0), with almost 90% of the time (238 min) spent working at intensities <50% of the heart rate reserve. The projected metabolic heat production during mustering ranged between 178 and 333 W (women), and between 212 and 542 W (men). The average core temperature was 37.6 degrees C, while the mean skin temperature averaged 34.1 degrees C. It was concluded that the working environment is, on average, thermally uncompensable during the mustering season. However, horseback mustering per se is a relatively low-intensity activity, interspersed with short periods of high-intensity work. This activity level was reflected within core temperatures, which rarely climbed above values associated with light-moderate exercise. Thus, whilst the climatic state was uncompensable, stockmen used behavioural strategies to minimise the risk of heat illness. Finally, it was observed that the helmet, though unpleasant to wear, did not appear to increase thermal strain in a manner that would disadvantage stockmen.

  3. Similarities and differences between on-scalp and conventional in-helmet magnetoencephalography recordings.

    Directory of Open Access Journals (Sweden)

    Lau M Andersen

    Full Text Available The development of new magnetic sensor technologies that promise sensitivities approaching that of conventional MEG technology while operating at far lower operating temperatures has catalysed the growing field of on-scalp MEG. The feasibility of on-scalp MEG has been demonstrated via benchmarking of new sensor technologies performing neuromagnetic recordings in close proximity to the head surface against state-of-the-art in-helmet MEG sensor technology. However, earlier work has provided little information about how these two approaches compare, or about the reliability of observed differences. Herein, we present such a comparison, based on recordings of the N20m component of the somatosensory evoked field as elicited by electric median nerve stimulation. As expected from the proximity differences between the on-scalp and in-helmet sensors, the magnitude of the N20m activation as recorded with the on-scalp sensor was higher than that of the in-helmet sensors. The dipole pattern of the on-scalp recordings was also more spatially confined than that of the conventional recordings. Our results furthermore revealed unexpected temporal differences in the peak of the N20m component. An analysis protocol was therefore developed for assessing the reliability of this observed difference. We used this protocol to examine our findings in terms of differences in sensor sensitivity between the two types of MEG recordings. The measurements and subsequent analysis raised attention to the fact that great care has to be taken in measuring the field close to the zero-line crossing of the dipolar field, since it is heavily dependent on the orientation of sensors. Taken together, our findings provide reliable evidence that on-scalp and in-helmet sensors measure neural sources in mostly similar ways.

  4. Automatic helmet-wearing detection for law enforcement using CCTV cameras

    Science.gov (United States)

    Wonghabut, P.; Kumphong, J.; Satiennam, T.; Ung-arunyawee, R.; Leelapatra, W.

    2018-04-01

    The objective of this research is to develop an application for enforcing helmet wearing using CCTV cameras. The developed application aims to help law enforcement by police, and eventually resulting in changing risk behaviours and consequently reducing the number of accidents and its severity. Conceptually, the application software implemented using C++ language and OpenCV library uses two different angle of view CCTV cameras. Video frames recorded by the wide-angle CCTV camera are used to detect motorcyclists. If any motorcyclist without helmet is found, then the zoomed (narrow-angle) CCTV is activated to capture image of the violating motorcyclist and the motorcycle license plate in real time. Captured images are managed by database implemented using MySQL for ticket issuing. The results show that the developed program is able to detect 81% of motorcyclists on various motorcycle types during daytime and night-time. The validation results reveal that the program achieves 74% accuracy in detecting the motorcyclist without helmet.

  5. Structural Equation Modelling in Behavioral Intention to Use Safety Helmet Reminder System

    Directory of Open Access Journals (Sweden)

    Rosli Naida

    2016-01-01

    Full Text Available Motorcycle is one of private transportation which has been widely used in many countries including Malaysia. However, motorcycles are the most dangerous form of motorized transport. Royal Malaysian Police (PDRM statistics recorded that motorcycle is the highest vehicle (45.9% involved in traffic accident compared to other vehicles. The potential cause of the death to the motorcyclist was due to the head injury. One of strategy to mitigate this problem is through proper usage of safety helmet. Therefore, this paper was introduce a new approach on motorcyclist safety by using the Technology Acceptance Model (TAM with additional determinants that contribute to behavioral intention and to increase the proper usage of safety helmets among Malaysian motorcyclists. The Structural Equation Modelling (SEM was used to test the structural TAM proposed. The evaluation for structural model showed the goodness of fit indices are excellent fit. This study found that perceived ease of use, perceived usefulness and social norm are significant towards behavioral intention to use Safety Helmet Reminder System (SHR.

  6. The Influence of Various Factors on High School Football Helmet Face Mask Removal: A Retrospective, Cross-Sectional Analysis

    Science.gov (United States)

    Swartz, Erik E; Decoster, Laura C; Norkus, Susan A; Cappaert, Thomas A

    2007-01-01

    Context: Most research on face mask removal has been performed on unused equipment. Objective: To identify and compare factors that influence the condition of helmet components and their relationship to face mask removal. Design: A cross-sectional, retrospective study. Setting: Five athletic equipment reconditioning/recertification facilities. Participants: 2584 helmets from 46 high school football teams representing 5 geographic regions. Intervention(s): Helmet characteristics (brand, model, hardware components) were recorded. Helmets were mounted and face mask removal was attempted using a cordless screwdriver. The 2004 season profiles and weather histories were obtained for each high school. Main Outcome Measure(s): Success and failure (including reason) for removal of 4 screws from the face mask were noted. Failure rates among regions, teams, reconditioning year, and screw color (type) were compared. Weather histories were compared. We conducted a discriminant analysis to determine if weather variables, region, helmet brand and model, reconditioning year, and screw color could predict successful face mask removal. Metallurgic analysis of screw samples was performed. Results: All screws were successfully removed from 2165 (84%) helmets. At least 1 screw could not be removed from 419 (16%) helmets. Significant differences were found for mean screw failure per helmet among the 5 regions, with the Midwest having the lowest failure rate (0.08 ± 0.38) and the Southern (0.33 ± 0.72), the highest. Differences were found in screw failure rates among the 46 teams (F1,45 = 9.4, P < .01). Helmets with the longest interval since last reconditioning (3 years) had the highest failure rate, 0.47 ± 0.93. Differences in success rates were found among 4 screw types (χ21,4 = 647, P < .01), with silver screws having the lowest percentage of failures (3.4%). A discriminant analysis (Λ = .932, χ214,n=2584 = 175.34, P < .001) revealed screw type to be the strongest predictor of

  7. Integration of Attributes from Non-Linear Characterization of Cardiovascular Time-Series for Prediction of Defibrillation Outcomes.

    Directory of Open Access Journals (Sweden)

    Sharad Shandilya

    Full Text Available The timing of defibrillation is mostly at arbitrary intervals during cardio-pulmonary resuscitation (CPR, rather than during intervals when the out-of-hospital cardiac arrest (OOH-CA patient is physiologically primed for successful countershock. Interruptions to CPR may negatively impact defibrillation success. Multiple defibrillations can be associated with decreased post-resuscitation myocardial function. We hypothesize that a more complete picture of the cardiovascular system can be gained through non-linear dynamics and integration of multiple physiologic measures from biomedical signals.Retrospective analysis of 153 anonymized OOH-CA patients who received at least one defibrillation for ventricular fibrillation (VF was undertaken. A machine learning model, termed Multiple Domain Integrative (MDI model, was developed to predict defibrillation success. We explore the rationale for non-linear dynamics and statistically validate heuristics involved in feature extraction for model development. Performance of MDI is then compared to the amplitude spectrum area (AMSA technique.358 defibrillations were evaluated (218 unsuccessful and 140 successful. Non-linear properties (Lyapunov exponent > 0 of the ECG signals indicate a chaotic nature and validate the use of novel non-linear dynamic methods for feature extraction. Classification using MDI yielded ROC-AUC of 83.2% and accuracy of 78.8%, for the model built with ECG data only. Utilizing 10-fold cross-validation, at 80% specificity level, MDI (74% sensitivity outperformed AMSA (53.6% sensitivity. At 90% specificity level, MDI had 68.4% sensitivity while AMSA had 43.3% sensitivity. Integrating available end-tidal carbon dioxide features into MDI, for the available 48 defibrillations, boosted ROC-AUC to 93.8% and accuracy to 83.3% at 80% sensitivity.At clinically relevant sensitivity thresholds, the MDI provides improved performance as compared to AMSA, yielding fewer unsuccessful defibrillations

  8. Societal cost of traumatic brain injury: A comparison of cost-of-injuries related to biking with and without helmet use.

    Science.gov (United States)

    Costa, Camille K; Dagher, Jehane H; Lamoureux, Julie; de Guise, Elaine; Feyz, Mitra

    2015-01-01

    The goal of this study is to determine if a difference in societal costs exists from traumatic brain injuries (TBI) in patients who wear helmets compared to non-wearers. This is a retrospective cost-of-injury study of 128 patients admitted to the Montreal General Hospital (MGH) following a TBI that occurred while cycling between 2007-2011. Information was collected from Quebec Trauma Registry. The independent variables collected were socio-demographic, helmet status, clinical and neurological patient information. The dependent variables evaluated societal costs. The median costs of hospitalization were significantly higher (p = 0.037) in the no helmet group ($7246.67 vs. $4328.17). No differences in costs were found for inpatient rehabilitation (p = 0.525), outpatient rehabilitation (p = 0.192), loss of productivity (p = 0.108) or death (p = 1.000). Overall, the differences in total societal costs between the helmet and no helmet group were not significantly different (p = 0.065). However, the median total costs for patients with isolated TBI in the non-helmet group ($22, 232.82) was significantly higher (p = 0.045) compared to the helmet group ($13, 920.15). Cyclists sustaining TBIs who did not wear helmets in this study were found to cost society nearly double that of helmeted cyclists.

  9. Integrating support vector machines and random forests to classify crops in time series of Worldview-2 images

    Science.gov (United States)

    Zafari, A.; Zurita-Milla, R.; Izquierdo-Verdiguier, E.

    2017-10-01

    Crop maps are essential inputs for the agricultural planning done at various governmental and agribusinesses agencies. Remote sensing offers timely and costs efficient technologies to identify and map crop types over large areas. Among the plethora of classification methods, Support Vector Machine (SVM) and Random Forest (RF) are widely used because of their proven performance. In this work, we study the synergic use of both methods by introducing a random forest kernel (RFK) in an SVM classifier. A time series of multispectral WorldView-2 images acquired over Mali (West Africa) in 2014 was used to develop our case study. Ground truth containing five common crop classes (cotton, maize, millet, peanut, and sorghum) were collected at 45 farms and used to train and test the classifiers. An SVM with the standard Radial Basis Function (RBF) kernel, a RF, and an SVM-RFK were trained and tested over 10 random training and test subsets generated from the ground data. Results show that the newly proposed SVM-RFK classifier can compete with both RF and SVM-RBF. The overall accuracies based on the spectral bands only are of 83, 82 and 83% respectively. Adding vegetation indices to the analysis result in the classification accuracy of 82, 81 and 84% for SVM-RFK, RF, and SVM-RBF respectively. Overall, it can be observed that the newly tested RFK can compete with SVM-RBF and RF classifiers in terms of classification accuracy.

  10. Hydrological Regime Monitoring and Mapping of the Zhalong Wetland through Integrating Time Series Radarsat-2 and Landsat Imagery

    Directory of Open Access Journals (Sweden)

    Xiaodong Na

    2018-05-01

    Full Text Available Zhalong wetland is a globally important breeding habitat for many rare migratory bird species. Prompted by the high demand for temporal and spatial information about the wetland’s hydrological regimes and landscape patterns, eight time series Radarsat-2 images were utilized to detect the flooding characteristics of the Zhalong wetland. Subsequently, a random forest model was built to discriminate wetlands from other land cover types, combining with optical, radar, and hydrological regime data derived from multitemporal synthetic aperture radar (SAR images. The results showed that hydrological regimes variables, including flooding extent and flooding frequency, derived from multitemporal SAR images, improve the land cover classification accuracy in the natural wetlands distribution area. The permutation importance scores derived from the random forest classifier indicate that normalized difference vegetation index (NDVI calculated from optical imagery and the flooding frequency derived from multitemporal SAR imagery were found to be the most important variables for land cover mapping. Accuracy testing indicate that the addition of hydrological regime features effectively depressed the omission error rates (from 52.14% to 2.88% of marsh and the commission error (from 77.34% to 51.27% of meadow, thereby improving the overall classification accuracy (from 76.49% to 91.73%. The hydrological regimes and land cover monitoring in the typical wetlands are important for eco-hydrological modeling, biodiversity conservation, and regional ecology and water security.

  11. Investigation of the optimal detector arrangement for the helmet-chin PET – A simulation study

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, Abdella M., E-mail: abdellanur@gmail.com; Tashima, Hideaki; Yoshida, Eiji; Yamaya, Taiga, E-mail: yamaya.taiga@qst.go.jp

    2017-06-21

    High sensitivity and high spatial resolution dedicated brain PET scanners are in high demand for early diagnosis of neurodegenerative diseases and studies of brain functions. To meet the demand, we have proposed the helmet-chin PET geometry which has a helmet detector and a chin detector. Our first prototype scanner used 54 4-layer depth-of-interaction (DOI) detectors. The helmet detector of the scanner had three detector rings with different radii arranged on a surface of a hemisphere (with a radius of 126.5 mm) and a top cover detector. Therefore, in this study, for our next development, we propose a spherical arrangement, in which the central axis of each detector points toward the center of the hemisphere, and we optimize the size of the detector crystal block to be arranged on the helmet detector. We simulate the spherical arrangement with the optimized crystal block size and compare its imaging performance with the multi-ring arrangement, which has a similar detector arrangement to that of our first prototype. We conduct Monte Carlo simulation to model the scanners having the 4-layer DOI detectors which consist of LYSO crystals. A dead space of 2 mm is assumed on each side of the crystal blocks such as for wrapping. The size of the crystal block is varied from 4×4 mm{sup 2} to 54×54 mm{sup 2} while fixing the thickness of the crystal block to 20 mm. We find that the crystal block sized at 42×42 mm{sup 2} has the highest sensitivity for a hemispherical phantom. The comparison of the two arrangements with the optimized crystal blocks show that, for the same number of crystal blocks, the spherical arrangement has 17% higher sensitivity for the hemispherical phantom than the multi-ring arrangement. We conclude that the helmet-chin PET with the spherical arrangement constructed from the crystal block sized at 42×42×20 mm{sup 3} has better imaging performance especially at the upper part of the brain compared to the multi-ring arrangement while keeping similar

  12. Outcome analysis after helmet therapy using 3D photogrammetry in patients with deformational plagiocephaly: the role of root mean square.

    Science.gov (United States)

    Moghaddam, Mahsa Bidgoli; Brown, Trevor M; Clausen, April; DaSilva, Trevor; Ho, Emily; Forrest, Christopher R

    2014-02-01

    Deformational plagiocephaly (DP) is a multifactorial non-synostotic cranial deformity with a reported incidence as high as 1 in 7 infants in North America. Treatment options have focused on non-operative interventions including head repositioning and the use of an orthotic helmet device. Previous studies have used linear and two dimensional outcome measures to assess changes in cranial symmetry after helmet therapy. Our objective was to demonstrate improvement in head shape after treatment with a cranial molding helmet by using Root Mean Square (RMS), a measure unique to 3D photogrammetry, which takes into account both changes in volume and shape over time. Three dimensional photographs were obtained before and after molding helmet treatment in 40 infants (4-10 months old) with deformational plagiocephaly. Anatomical reference planes and measurements were recorded using the 3dMD Vultus(®) analysis software. RMS was used to quantify symmetry by superimposing left and right quadrants and calculating the mean value of aggregate distances between surfaces. Over 95% of the patients demonstrated an improvement in symmetry with helmet therapy. Furthermore, when the sample of infants was divided into two treatment subgroups, a statistically significant correlation was found between the age at the beginning of treatment and the change in the RMS value. When helmet therapy was started before 7 months of age a greater improvement in symmetry was seen. This work represents application of the technique of RMS analysis to demonstrate the efficacy of treatment of deformational plagiocephaly with a cranial molding helmet. Copyright © 2014. Published by Elsevier Ltd.

  13. The Breakthrough Series Collaborative on Service Integration: A Mixed Methods Study of a Strengths-Based Initiative

    Directory of Open Access Journals (Sweden)

    Cynthia A. Lietz

    2010-11-01

    Full Text Available Arizona’s Department of Economic Security (DES engaged in a strengths-based initiative to increase quality and integration of human services. Twenty teams including employees from state agencies, community leaders, and families were brought together to discuss and implement improvements to a variety of social services. A mixed methods study was conducted to explore the complex process of forming diverse teams to strengthen social services. Specifically, the research team conducted focus groups to collect qualitative data from a purposive sample of the teams to explore their experiences in greater depth. Analysis of the data led to the development of an online survey instrument that allowed all collaborative members an opportunity to participate in the study. Findings suggest that while the teams faced many challenges, a commitment to the process brought perseverance, communication, and creativity allowing this collaborative to initiate 105 activities to bring about positive changes in social services within their communities.

  14. The Effects of the Personal Armor System for Ground Troops (PASGT) and the Advanced Combat Helmet (ACH) with and without PVS-14 Night Vision Goggles (NVG) on Neck Biomechanics During Dismounted Soldier Movements

    National Research Council Canada - National Science Library

    LaFiandra, Michael; Harman, Everett; Cornelius, Nancy; Frykman, Peter; Gutekunst, David; Nelson, Gabe

    2007-01-01

    Kevlar helmets provide the soldier with basic ballistic and impact protection. However, the helmet has recently become a mounting platform for devices such as night-vision goggles, drop down displays, weapon-aiming systems, etc...

  15. Manufacture and impact analysis of bmx helmet made from polymeric foam composite strengthened by oil palm empty fruit bunch fiber

    Science.gov (United States)

    Mahadi

    2018-02-01

    Helmets are protective head gears wear by bicycle riders for protection against injury in case of the accident. Helmet standards require helmets to be tested with a simple drop test onto an anvil. The purpose of research is to know toughness of bicycle helmet made from polymeric foam composite strengthened by oil palm empty fruit bunch fiber. This research contains report result manufacture and impacts analysis of bicycle helmet made from polymeric foam composite materials strengthened by oil palm empty fruit bunch fiber (EFB). The geometric helmet structure consists of shell and liner; both layers have sandwich structure. The shell uses matrix unsaturated Polyester BQTN-157EX material, chopped strand mat 300 glass fiber reinforce and methyl ethyl ketone peroxide (MEKPO) catalyst with the weight composition of 100 gr, 15 gr, and 5 gr. The liner uses matrix unsaturated Polyester BQTN-157 EX material, EFB fiber reinforces, Polyurethane blowing agent, and MEKPO catalyst with the composition of 275 gr (50%), 27.5 gr (5%), 247 gr (45%), and 27.5 gr (5%). Layers of the helmet made by using hand lay-up method and gravity casting method. Mechanical properties of polymeric foam were the tensile strength (ơt) 1.17 Mpa, compressive strength (ơc) 0.51 MPa, bending strength (ơb) 3.94 MPa, elasticity modulus (E) 37.97 Mpa, density (ρ) 193 (kg/m3). M4A model helmet is the most ergonomic with the thickness 10 mm and the amount of air channel 11. Free fall impact test was done in 9 samples with the thickness of 10 mm with the height of 1.5 m. The result of the impact test was impacted force (Fi) 241.55 N, Impulse (I) 6.28 Ns, impact Strength (ơi) 2.02 Mpa and impact Energy (Ei) 283.77 Joule. The properties of bicycle helmet model BMX-M4A type was 264 mm length, 184 mm width, 154 mm height, 10 mm thick, 580 mm head circle, 331 g mass and 11 wind channels.

  16. Brain response to primary blast wave using validated finite element models of human head and advanced combat helmet

    Directory of Open Access Journals (Sweden)

    Liying eZhang

    2013-08-01

    Full Text Available Blast-induced traumatic brain injury has emerged as a signature injury in combat casualty care. Present combat helmets are designed primarily to protect against ballistic and blunt impacts, but the current issue with helmets is protection concerning blasts. In order to delineate the blast wave attenuating capability of the Advanced Combat Helmet (ACH, a finite element (FE study was undertaken to evaluate the head response against blast loadings with and without helmet using a partially validated FE model of the human head and ACH. Four levels of overpressures (0.27-0.66 MPa from the Bowen’s lung iso-damage threshold curves were used to simulate blast insults. Effectiveness of the helmet with respect to head orientation was also investigated. The resulting biomechanical responses of the brain to blast threats were compared for human head with and without the helmet. For all Bowen’s cases, the peak intracranial pressures (ICP in the head ranged from 0.68-1.8 MPa in the coup cortical region. ACH was found to mitigate ICP in the head by 10-35%. Helmeted head resulted in 30% lower average peak brain strains and product of strain and strain rate. Among three blast loading directions with ACH, highest reduction in peak ICP (44% was due to backward blasts whereas the lowest reduction in peak ICP and brain strains was due to forward blast (27%. The biomechanical responses of a human head to primary blast insult exhibited directional sensitivity owing to the different geometry contours and coverage of the helmet construction and asymmetric anatomy of the head. Thus, direction-specific tolerances are needed in helmet design in order to offer omni-directional protection for the human head. The blasts of varying peak overpressures and durations that are believed to produce the same level of lung injury produce different levels of mechanical responses in the brain, and hence "iso-damage" curves for brain injury are likely different than the Bowen curves

  17. A comparison of monthly precipitation point estimates at 6 locations in Iran using integration of soft computing methods and GARCH time series model

    Science.gov (United States)

    Mehdizadeh, Saeid; Behmanesh, Javad; Khalili, Keivan

    2017-11-01

    Precipitation plays an important role in determining the climate of a region. Precise estimation of precipitation is required to manage and plan water resources, as well as other related applications such as hydrology, climatology, meteorology and agriculture. Time series of hydrologic variables such as precipitation are composed of deterministic and stochastic parts. Despite this fact, the stochastic part of the precipitation data is not usually considered in modeling of precipitation process. As an innovation, the present study introduces three new hybrid models by integrating soft computing methods including multivariate adaptive regression splines (MARS), Bayesian networks (BN) and gene expression programming (GEP) with a time series model, namely generalized autoregressive conditional heteroscedasticity (GARCH) for modeling of the monthly precipitation. For this purpose, the deterministic (obtained by soft computing methods) and stochastic (obtained by GARCH time series model) parts are combined with each other. To carry out this research, monthly precipitation data of Babolsar, Bandar Anzali, Gorgan, Ramsar, Tehran and Urmia stations with different climates in Iran were used during the period of 1965-2014. Root mean square error (RMSE), relative root mean square error (RRMSE), mean absolute error (MAE) and determination coefficient (R2) were employed to evaluate the performance of conventional/single MARS, BN and GEP, as well as the proposed MARS-GARCH, BN-GARCH and GEP-GARCH hybrid models. It was found that the proposed novel models are more precise than single MARS, BN and GEP models. Overall, MARS-GARCH and BN-GARCH models yielded better accuracy than GEP-GARCH. The results of the present study confirmed the suitability of proposed methodology for precise modeling of precipitation.

  18. Investigation on the applicability of dust protection helmets in the mining industry. Untersuchungen ueber die Einsatzmoeglichkeiten von Staubschutzhelmen im Bergbau

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, H.D.; Werner, W.; Fuerst, E.

    1984-10-01

    In case of static ambient air, leakages for volumes of 25 x 1,5 l/min and air supplies >= 120 l/min or 25 x 2,0 l/min and >= 160 l/min do not occur. The increasing flow rate of moving ambient air leads to an increase of leakages. They show their largest extensions in case of lateral flow. In addition, they expand together with increasing physiological load. Therefore, the inherent air supply should not be below 160 l/min. The comparison of the dust protection helmet 'Airstream AH 1' with two respirators revealed the lowest additional physiological load for the dust protection helmet. Applicability tests in situ resulted in the following principal objections: contamination and scratches on the visor leading to visibility restriction of the wearer, bad fit, weight distribution and helmet dimensions, pressure sores and chafes of sealing parts and edges, lamp installation. Air supply and movement were felt as too high in case of low ambient temperatures, and in case of high temperatures and physiological strain it was considered as too low. There were only few objections against fan noise, weight and impediment by cable and battery. Based on the results, a specification including monitoring and maintenance of the helmet was made and additional tests for DIN design 58 645, item 7, were induced. Furthermore, a proposal regarding helmet optimisation was made.

  19. Towards reducing impact-induced brain injury: lessons from a computational study of army and football helmet pads.

    Science.gov (United States)

    Moss, William C; King, Michael J; Blackman, Eric G

    2014-01-01

    We use computational simulations to compare the impact response of different football and U.S. Army helmet pad materials. We conduct experiments to characterise the material response of different helmet pads. We simulate experimental helmet impact tests performed by the U.S. Army to validate our methods. We then simulate a cylindrical impactor striking different pads. The acceleration history of the impactor is used to calculate the head injury criterion for each pad. We conduct sensitivity studies exploring the effects of pad composition, geometry and material stiffness. We find that (1) the football pad materials do not outperform the currently used military pad material in militarily relevant impact scenarios; (2) optimal material properties for a pad depend on impact energy and (3) thicker pads perform better at all velocities. Although we considered only the isolated response of pad materials, not entire helmet systems, our analysis suggests that by using larger helmet shells with correspondingly thicker pads, impact-induced traumatic brain injury may be reduced.

  20. Fourier series

    CERN Document Server

    Tolstov, Georgi P

    1962-01-01

    Richard A. Silverman's series of translations of outstanding Russian textbooks and monographs is well-known to people in the fields of mathematics, physics, and engineering. The present book is another excellent text from this series, a valuable addition to the English-language literature on Fourier series.This edition is organized into nine well-defined chapters: Trigonometric Fourier Series, Orthogonal Systems, Convergence of Trigonometric Fourier Series, Trigonometric Series with Decreasing Coefficients, Operations on Fourier Series, Summation of Trigonometric Fourier Series, Double Fourie

  1. Clinical performance improvement series. Classic CQI integrated with comprehensive disease management as a model for performance improvement.

    Science.gov (United States)

    Joshi, M S; Bernard, D B

    1999-08-01

    In recent years, health and disease management has emerged as an effective means of delivering, integrating, and improving care through a population-based approach. Since 1997 the University of Pennsylvania Health System (UPHS) has utilized the key principles and components of continuous quality improvement (CQI) and disease management to form a model for health care improvement that focuses on designing best practices, using best practices to influence clinical decision making, changing processes and systems to deploy and deliver best practices, and measuring outcomes to improve the process. Experience with 28 programs and more than 14,000 patients indicates significant improvement in outcomes, including high physician satisfaction, increased patient satisfaction, reduced costs, and improved clinical process and outcome measures across multiple diseases. DIABETES DISEASE MANAGEMENT: In three months a UPHS multidisciplinary diabetes disease management team developed a best practice approach for the treatment of all patients with diabetes in the UPHS. After the program was pilot tested in three primary care physician sites, it was then introduced progressively to additional practice sites throughout the health system. The establishment of the role of the diabetes nurse care managers (certified diabetes educators) was central to successful program deployment. Office-based coordinators ensure incorporation of the best practice protocols into routine flow processes. A disease management intranet disseminates programs electronically. Outcomes of the UPHS health and disease management programs so far demonstrate success across multiple dimensions of performance-service, clinical quality, access, and value. The task of health care leadership today is to remove barriers and enable effective implementation of key strategies, such as health and disease management. Substantial effort and resources must be dedicated to gain physician buy-in and achieve compliance. The

  2. Integration

    DEFF Research Database (Denmark)

    Emerek, Ruth

    2004-01-01

    Bidraget diskuterer de forskellige intergrationsopfattelse i Danmark - og hvad der kan forstås ved vellykket integration......Bidraget diskuterer de forskellige intergrationsopfattelse i Danmark - og hvad der kan forstås ved vellykket integration...

  3. Effects of videogame distraction using a virtual reality type head-mounted display helmet on cold pressor pain in children.

    Science.gov (United States)

    Dahlquist, Lynnda M; Weiss, Karen E; Clendaniel, Lindsay Dillinger; Law, Emily F; Ackerman, Claire Sonntag; McKenna, Kristine D

    2009-06-01

    To test whether a head-mounted display helmet enhances the effectiveness of videogame distraction for children experiencing cold pressor pain. Forty-one children, aged 6-14 years, underwent one or two baseline cold pressor trials followed by two distraction trials in which they played the same videogame with and without the helmet in counterbalanced order. Pain threshold (elapsed time until the child reported pain) and pain tolerance (total time the child kept the hand submerged in the cold water) were measured for each cold pressor trial. Both distraction conditions resulted in improved pain tolerance relative to baseline. Older children appeared to experience additional benefits from using the helmet, whereas younger children benefited equally from both conditions. The findings suggest that virtual reality technology can enhance the effects of distraction for some children. Research is needed to identify the characteristics of children for whom this technology is best suited.

  4. Effects of Videogame Distraction using a Virtual Reality Type Head-Mounted Display Helmet on Cold Pressor Pain in Children

    Science.gov (United States)

    Weiss, Karen E.; Dillinger Clendaniel, Lindsay; Law, Emily F.; Ackerman, Claire Sonntag; McKenna, Kristine D.

    2009-01-01

    Objective To test whether a head-mounted display helmet enhances the effectiveness of videogame distraction for children experiencing cold pressor pain. Method Forty-one children, aged 6–14 years, underwent one or two baseline cold pressor trials followed by two distraction trials in which they played the same videogame with and without the helmet in counterbalanced order. Pain threshold (elapsed time until the child reported pain) and pain tolerance (total time the child kept the hand submerged in the cold water) were measured for each cold pressor trial. Results Both distraction conditions resulted in improved pain tolerance relative to baseline. Older children appeared to experience additional benefits from using the helmet, whereas younger children benefited equally from both conditions. The findings suggest that virtual reality technology can enhance the effects of distraction for some children. Research is needed to identify the characteristics of children for whom this technology is best suited. PMID:18367495

  5. An Analysis of Technology-Related Distracted Biking Behaviors and Helmet Use Among Cyclists in New York City.

    Science.gov (United States)

    Ethan, Danna; Basch, Corey H; Johnson, Glen D; Hammond, Rodney; Chow, Ching Man; Varsos, Victoria

    2016-02-01

    Bicycling is becoming an increasingly utilized mode of transportation in New York City. Technology-related distracted bicycling and helmet use are behaviors that can impact bike safety. The aims of this study were twofold: (1) to determine rates and types of technology-related distracted behaviors among bicyclists in the borough of Manhattan in New York City; and (2) to assess the rate of bicycle helmet use among these cyclists. Bicyclists in five popular riding areas in Manhattan were observed for a total of 50 h using a digital video camera during summer months in 2014. Videos were coded and enumerated for the total number and gender of cyclists, type of bicycle, number wearing headphones/earbuds and/or using a mobile phone, and whether the cyclist was wearing a helmet. Almost 25,000 cyclists were observed across the five selected locations (n = 24,861). Riders were almost four times more likely not to wear a helmet on rental bikes as compared with non-rentals (Citi Bike(®) OR 3.8; 95% CI 2.5, 5.9: other rental OR 3.8; 95% CI 3.0, 4.9). Significantly increased odds of not wearing a helmet were observed for females relative to males (OR 1.4; 95% CI 1.1, 1.8) across varied times and locations. Overall, rates of technology-related distraction were low, with headphone use being most prevalent. Males were more likely to wear headphones/earbuds (OR 2.0; 95% CI 1.4, 2.9), as were cyclists on Citi Bikes relative to other rental bikes (OR 2.2; 95% CI 1.3, 3.6). Findings from this study contribute to the growing literature on distracted biking and helmet use among bike share program riders and other cyclists and can inform policymakers and program planners aiming to improve bicycle safety in urban settings.

  6. Impact response of US Army and National Football League helmet pad systems

    Energy Technology Data Exchange (ETDEWEB)

    Moss, W C; King, M J

    2011-02-18

    Lawrence Livermore National Laboratory [LLNL] was tasked to compare the impact response of NFL helmet pad systems and U.S. Army pad systems compatible with an Advanced Combat Helmet [ACH] at impact velocities up to 20 ft/s. This was a one-year study funded by the U.S. Army and JIEDDO. The Army/JIEDDO point of contact is COL R. Todd Dombroski, DO, JIEDDO Surgeon. LLNL was chosen by committee to perform the research based on prior published computational studies of the mechanical response of helmets and skulls to blast. Our collaborators include the U.S. Army Aeromedical Research Laboratory [USAARL] (a DoD laboratory responsible for impact testing helmets), Team Wendy and Oregon Aero (current and former ACH pad manufacturers), Riddell and Xenith (NFL pad manufacturers), and d3o (general purpose sports pad manufacturer). The manufacturer-supplied pad systems that were studied are shown in the figure below. The first two are the Army systems, which are bilayer foam pads with both hard and soft foam and a water-resistant airtight wrapper (Team Wendy) or a water-resistant airtight coating (Oregon Aero). The next two are NFL pad systems. The Xenith system consists of a thin foam pad and a hollow air-filled cylinder that elastically buckles under load. The Riddell system is a bilayer foam pad that is encased in an inflatable airbag with relief channels to neighboring pads in the helmet. The inflatable airbag is for comfort and provides no enhancement to impact mitigation. The d3o system consists of a rate-sensitive homogeneous dense foam. LLNL performed experiments to characterize the material properties of the individual foam materials and the response of the complete pad systems, to obtain parameters needed for the simulations. LLNL also performed X-ray CT scans of an ACH helmet shell that were used to construct a geometrically accurate computational model of the helmet. Two complementary sets of simulations were performed. The first set of simulations reproduced the

  7. Helmet-mounted displays: why haven't they taken off?

    Science.gov (United States)

    Havig, P.; Goff, C.; McIntire, J.; Franck, D.

    2009-05-01

    Helmet-Mounted Display (HMD) technologies have been developing for over 3 decades and have been studied for multiple applications ranging from military aircraft, to virtual reality, augmented reality, entertainment and a host of other ideas. It would not be unreasonable to assume that after this much time they would be employed in our daily lives as ubiquitously as the common desktop monitor. However, this is simply not the case. How can this be when they can be used in so many ways for so many tasks? Throughout this work we will look at some of the reasons why as well of some of the ways they can be used.

  8. Successful Removal of Football Helmet Face-Mask Clips After 1 Season of Use

    Science.gov (United States)

    Scibek, Jason S.; Gatti, Joseph M.; McKenzie, Jennifer I.

    2012-01-01

    Context Whereas many researchers have assessed the ability to remove loop straps in traditional face-mask attachment systems after at least 1 season of use, research in which the effectiveness of the Riddell Quick Release (QR) Face Guard Attachment System clip after 1 season has been assessed is limited. Objective To examine the success rate of removing the QR clips after 1 season of use at the Football Championship Subdivision level. We hypothesized that 1 season of use would negatively affect the removal rate of the QR clip but repeated clip-removal trials would improve the removal rate. Design Retrospective, quasi-experimental design. Setting Controlled laboratory study. Patients or Other Participants Sixty-three football helmets from a National Collegiate Athletic Association Division I university located in western Pennsylvania used during the 2008 season were tested. Intervention(s) Three certified athletic trainers (2 men, 1 woman; age = 31.3 ± 3.06 years, time certified = 9.42 ± 2.65 years) attempted to remove the QR clips from each helmet with the tool provided by the manufacturer. Helmets then were reassembled to allow each athletic trainer to attempt clip removal. Main Outcome Measure(s) The dependent variables were total left clips removed (TCR-L), total right clips removed (TCR-R), and total clips removed (TCR). Success rate of clip removal (SRCR) also was assessed. Results Percentages for TCR-L, TCR-R, and TCR were 100% (189 of 189), 96.30% (182 of 189), and 98.15% (371 of 378), respectively. A paired-samples t test revealed a difference between TCR-R and TCR-L (t188 = −2.689, P = .008, μd = 0.037, 95% confidence interval [CI] = −0.064, −0.010). The percentage for SRCR was 96.30% (n = 182), whereas SRCR percentages for trials 1, 2, and 3 were 95.24% (n = 60), 98.41% (n = 62), and 95.24% (n = 60), respectively, and did not represent a difference (F2,186 = 0.588, P = .56, 95% CI = 0.94, 0.99). Conclusions Our results indicated favorable and

  9. The protective effect of helmet use in motorcycle and bicycle accidents: a propensity score-matched study based on a trauma registry system.

    Science.gov (United States)

    Kuo, Spencer C H; Kuo, Pao-Jen; Rau, Cheng-Shyuan; Chen, Yi-Chun; Hsieh, Hsiao-Yun; Hsieh, Ching-Hua

    2017-08-07

    Transportation by motorcycle and bicycle has become popular in Taiwan, this study was designed to investigate the protective effect of helmet use during motorcycle and bicycle accidents by using a propensity score-matched study based on trauma registry system data. Data of adult patients hospitalized for motorcycle or bicycle accidents between January 1, 2009 and December 31, 2015 were retrieved from the Trauma Registry System. These included 7735 motorcyclists with helmet use, 863 motorcyclists without helmet use, 76 bicyclists with helmet use, and 647 bicyclists without helmet use. The primary outcome measurement was in-hospital mortality. Secondary outcomes were the hospital length of stay (LOS), intensive care unit (ICU) admission rate, and ICU LOS. Normally distributed continuous data were analyzed by the unpaired Student t-test, and non-normally distributed data were compared using the Mann-Whitney U-test. Two-sided Fisher exact or Pearson chi-square tests were used to compare categorical data. Propensity score matching (1:1 ratio using optimal method with a 0.2 caliper width) was performed using NCSS software, adjusting for the following covariates: sex, age, and comorbidities. Further logistic regression was used to evaluate the effect of helmet use on mortality rates of motorcyclists and bicyclists, respectively. The mortality rate for motorcyclists with helmet use (1.1%) was significantly lower than for motorcyclists without helmet use (4.2%; odds ratio [OR] 0.2; 95% confidence interval [CI]: 0.17-0.37; p Motorcycle helmets provide protection to adult motorcyclists involved in traffic accidents and their use is associated with a decrease in mortality rates and the risk of head injuries. However, no such protective effect of helmet use was observed for bicyclists involved in collisions.

  10. Examination of the protective roles of helmet/faceshield and directionality for human head under blast waves.

    Science.gov (United States)

    Sarvghad-Moghaddam, Hesam; Jazi, Mehdi Salimi; Rezaei, Asghar; Karami, Ghodrat; Ziejewski, Mariusz

    2015-01-01

    A parametric study was conducted to delineate the efficacy of personal protective equipment (PPE), such as ballistic faceshields and advanced combat helmets, in the case of a blast. The propagations of blast waves and their interactions with an unprotected head, a helmeted one, and a fully protected finite element head model (FEHM) were modeled. The biomechanical parameters of the brain were recorded when the FEHM was exposed to shockwaves from the front, back, top, and bottom. The directional dependent tissue response of the brain and the variable efficiency of PPE with respect to the blast orientation were two major results of this study.

  11. [Integrity].

    Science.gov (United States)

    Gómez Rodríguez, Rafael Ángel

    2014-01-01

    To say that someone possesses integrity is to claim that that person is almost predictable about responses to specific situations, that he or she can prudentially judge and to act correctly. There is a closed interrelationship between integrity and autonomy, and the autonomy rests on the deeper moral claim of all humans to integrity of the person. Integrity has two senses of significance for medical ethic: one sense refers to the integrity of the person in the bodily, psychosocial and intellectual elements; and in the second sense, the integrity is the virtue. Another facet of integrity of the person is la integrity of values we cherish and espouse. The physician must be a person of integrity if the integrity of the patient is to be safeguarded. The autonomy has reduced the violations in the past, but the character and virtues of the physician are the ultimate safeguard of autonomy of patient. A field very important in medicine is the scientific research. It is the character of the investigator that determines the moral quality of research. The problem arises when legitimate self-interests are replaced by selfish, particularly when human subjects are involved. The final safeguard of moral quality of research is the character and conscience of the investigator. Teaching must be relevant in the scientific field, but the most effective way to teach virtue ethics is through the example of the a respected scientist.

  12. Bike Helmets and Black Riders: Experiential Approaches to Helping Students Understand Natural Hazard Assessment and Mitigation Issues

    Science.gov (United States)

    Stein, S. A.; Kley, J.; Hindle, D.; Friedrich, A. M.

    2014-12-01

    Defending society against natural hazards is a high-stakes game of chance against nature, involving tough decisions. How should a developing nation allocate its budget between building schools for towns without ones or making existing schools earthquake-resistant? Does it make more sense to build levees to protect against floods, or to prevent development in the areas at risk? Would more lives be saved by making hospitals earthquake-resistant, or using the funds for patient care? These topics are challenging because they are far from normal experience, in that they involve rare events and large sums. To help students in natural hazard classes conceptualize them, we pose tough and thought-provoking questions about complex issues involved and explore them together via lectures, videos, field trips, and in-class and homework questions. We discuss analogous examples from the students' experiences, drawing on a new book "Playing Against Nature, Integrating Science and Economics to Mitigate Natural Hazards in an Uncertain World". Asking whether they wear bicycle helmets and why or why not shows the cultural perception of risk. Individual students' responses vary, and the overall results vary dramatically between the US, UK, and Germany. Challenges in hazard assessment in an uncertain world are illustrated by asking German students whether they buy a ticket on public transportation - accepting a known cost - or "ride black" - not paying but risking a heavy fine if caught. We explore the challenge of balancing mitigation costs and benefits via the question "If you were a student in Los Angeles, how much more would you pay in rent each month to live in an earthquake-safe building?" Students learn that interdisciplinary thinking is needed, and that due to both uncertainties and sociocultural factors, no unique or right strategies exist for a particular community, much the less all communities. However, we can seek robust policies that give sensible results given

  13. Concussion Characteristics in High School Football by Helmet Age/Recondition Status, Manufacturer, and Model: 2008-2009 Through 2012-2013 Academic Years in the United States.

    Science.gov (United States)

    Collins, Christy L; McKenzie, Lara B; Ferketich, Amy K; Andridge, Rebecca; Xiang, Huiyun; Comstock, R Dawn

    2016-06-01

    Football helmets used by high school athletes in the United States should meet the National Operating Committee on Standards for Athletic Equipment performance standards. Despite differences in interior padding and exterior shells, all football helmets should provide comparable protection against concussions. Yet, debate continues on whether differences in the rates or severity of concussions exist based on helmet age/recondition status, manufacturer, or model. To investigate whether high school football concussion characteristics varied by helmet age/recondition status, manufacturer, and model. Descriptive epidemiological study. High school football concussion and helmet data were collected from academic years 2008-2009 through 2012-2013 as part of the National High School Sports-Related Injury Surveillance Study. The certified athletic trainers of participating schools submitted athlete-exposure (AE) and injury information weekly. Participating schools reported 2900 football concussions during 3,528,790 AEs for an overall rate of 8.2 concussions per 10,000 AEs. Concussion rates significantly increased from 2008-2009 through 2012-2013 overall (P = .006) as well as in competition (P = .027) and practice (P = .023). Characteristics of concussed football players (ie, mean number of symptoms, specific concussion symptoms, symptom resolution time, and time until return to play) were similar among players wearing new helmets when compared with reconditioned helmets. Fewer players wearing an old/not reconditioned helmet had concussion symptoms resolve within 1 day compared with players wearing a new helmet. Despite differences in the manufacturers and models of helmets worn by all high school football players compared with players who sustained a concussion, the mean number of concussion symptoms, specific concussion symptoms, symptom resolution time, and time until return to play were similar for concussions sustained by football players wearing the most common helmet

  14. Towards Slow-Moving Landslide Monitoring by Integrating Multi-Sensor InSAR Time Series Datasets: The Zhouqu Case Study, China

    Directory of Open Access Journals (Sweden)

    Qian Sun

    2016-11-01

    Full Text Available Although the past few decades have witnessed the great development of Synthetic Aperture Radar Interferometry (InSAR technology in the monitoring of landslides, such applications are limited by geometric distortions and ambiguity of 1D Line-Of-Sight (LOS measurements, both of which are the fundamental weakness of InSAR. Integration of multi-sensor InSAR datasets has recently shown its great potential in breaking through the two limits. In this study, 16 ascending images from the Advanced Land Observing Satellite (ALOS and 18 descending images from the Environmental Satellite (ENVISAT have been integrated to characterize and to detect the slow-moving landslides in Zhouqu, China between 2008 and 2010. Geometric distortions are first mapped by using the imaging geometric parameters of the used SAR data and public Digital Elevation Model (DEM data of Zhouqu, which allow the determination of the most appropriate data assembly for a particular slope. Subsequently, deformation rates along respective LOS directions of ALOS ascending and ENVISAT descending tracks are estimated by conducting InSAR time series analysis with a Temporarily Coherent Point (TCP-InSAR algorithm. As indicated by the geometric distortion results, 3D deformation rates of the Xieliupo slope at the east bank of the Pai-lung River are finally reconstructed by joint exploiting of the LOS deformation rates from cross-heading datasets based on the surface–parallel flow assumption. It is revealed that the synergistic results of ALOS and ENVISAT datasets provide a more comprehensive understanding and monitoring of the slow-moving landslides in Zhouqu.

  15. Football helmet drop tests on different fields using an instrumented Hybrid III head.

    Science.gov (United States)

    Viano, David C; Withnall, Chris; Wonnacott, Michael

    2012-01-01

    An instrumented Hybrid III head was placed in a Schutt ION 4D football helmet and dropped on different turfs to study field types and temperature on head responses. The head was dropped 0.91 and 1.83 m giving impacts of 4.2 and 6.0 m/s on nine different football fields (natural, Astroplay, Fieldturf, or Gameday turfs) at turf temperatures of -2.7 to 23.9 °C. Six repeat tests were conducted for each surface at 0.3 m (1') intervals. The Hybrid III was instrumented with triaxial accelerometers to determine head responses for the different playing surfaces. For the 0.91-m drops, peak head acceleration varied from 63.3 to 117.1 g and HIC(15) from 195 to 478 with the different playing surfaces. The lowest response was with Astroplay, followed by the engineered natural turf. Gameday and Fieldturf involved higher responses. The differences between surfaces decreased in the 1.83 m tests. The cold weather testing involved higher accelerations, HIC(15) and delta V for each surface. The helmet drop test used in this study provides a simple and convenient means of evaluating the compliance and energy absorption of football playing surfaces. The type and temperature of the playing surface influence head responses.

  16. Cost Analysis of Noninvasive Helmet Ventilation Compared with Use of Noninvasive Face Mask in ARDS

    Directory of Open Access Journals (Sweden)

    Kwadwo Kyeremanteng

    2018-01-01

    Full Text Available Intensive care unit (ICU costs have doubled since 2000, totalling 108 billion dollars per year. Acute respiratory distress syndrome (ARDS has a prevalence of 10.4% and a 28-day mortality of 34.8%. Noninvasive ventilation (NIV is used in up to 30% of cases. A recent randomized controlled trial by Patel et al. (2016 showed lower intubation rates and 90-day mortality when comparing helmet to face mask NIV in ARDS. The population in the Patel et al. trial was used for cost analysis in this study. Projections of cost savings showed a decrease in ICU costs by $2527 and hospital costs by $3103 per patient, along with a 43.3% absolute reduction in intubation rates. Sensitivity analysis showed consistent cost reductions. Projected annual cost savings, assuming the current prevalence of ARDS, were $237538 in ICU costs and $291682 in hospital costs. At a national level, using yearly incidence of ARDS cases in American ICUs, this represents $449 million in savings. Helmet NIV, compared to face mask NIV, in nonintubated patients with ARDS, reduces ICU and hospital direct-variable costs along with intubation rates, LOS, and mortality. A large-scale cost-effectiveness analysis is needed to validate the findings.

  17. The European, Japanese and US protective helmet, gloves and boots for firefighters: thermoregulatory and psychological evaluations.

    Science.gov (United States)

    Lee, Joo-Young; Yamamoto, Yota; Oe, Riichi; Son, Su-Young; Wakabayashi, Hitoshi; Tochihara, Yutaka

    2014-01-01

    The purpose of this study was to investigate the physiological and subjective responses of the European, Japanese (JPN) and US firefighters' helmet, gloves and boots for international standardisation. Three experimental conditions were evaluated (clothing mass: 9.4, 8.2 and 10.1 kg for the three conditions, respectively) at the air temperature of 32°C and 60% relative humidity. The results showed that there was no significant difference among the three conditions in oxygen consumption, heart rate, total sweat rate, rectal temperature and mean skin temperature, whereas peripheral temperatures and subjective perceptions were lower in the JPN condition than in the other conditions (P < 0.05). These results indicate that a 0.5-kg reduction in helmet mass and a 1.1-kg reduction in boot mass during exercise resulted in a significant decrease in head and leg temperatures and subjective perceptions, while a 1.9-kg reduction in total clothing mass had insignificant influences on the metabolic burden and overall body temperature.

  18. Acceleration-based methodology to assess the blast mitigation performance of explosive ordnance disposal helmets

    Science.gov (United States)

    Dionne, J. P.; Levine, J.; Makris, A.

    2018-01-01

    To design the next generation of blast mitigation helmets that offer increasing levels of protection against explosive devices, manufacturers must be able to rely on appropriate test methodologies and human surrogates that will differentiate the performance level of various helmet solutions and ensure user safety. Ideally, such test methodologies and associated injury thresholds should be based on widely accepted injury criteria relevant within the context of blast. Unfortunately, even though significant research has taken place over the last decade in the area of blast neurotrauma, there currently exists no agreement in terms of injury mechanisms for blast-induced traumatic brain injury. In absence of such widely accepted test methods and injury criteria, the current study presents a specific blast test methodology focusing on explosive ordnance disposal protective equipment, involving the readily available Hybrid III mannequin, initially developed for the automotive industry. The unlikely applicability of the associated brain injury criteria (based on both linear and rotational head acceleration) is discussed in the context of blast. Test results encompassing a large number of blast configurations and personal protective equipment are presented, emphasizing the possibility to develop useful correlations between blast parameters, such as the scaled distance, and mannequin engineering measurements (head acceleration). Suggestions are put forward for a practical standardized blast testing methodology taking into account limitations in the applicability of acceleration-based injury criteria as well as the inherent variability in blast testing results.

  19. Development of an integrated data acquisition and handling system based on digital time series analysis for the measurement of plasma fluctuations

    International Nuclear Information System (INIS)

    Ghayspoor, R.; Roth, J.R.

    1986-01-01

    The nonlinear characteristics of data obtained by many plasma diagnostic systems requires the power of modern computers for on-line data processing and reduction. The objective of this work is to develop an integrated data acquisition and handling system based on digital time series analysis techniques. These techniques make it possible to investigate the nature of plasma fluctuations and the physical processes which give rise to them. The approach is to digitize the data, and to generate various spectra by means of Fast Fourier Transforms (FFT). Of particular interest is the computer generated auto-power spectrum, cross-power spectrum, phase spectrum, and squared coherency spectrum. Software programs based on those developed by Jae. Y. Hong at the University of Texas are utilized for these spectra. The LeCroy 3500-SA signal analyzer and VAX 11/780 are used as the data handling and reduction system in this work. In this report, the software required to link these two systems are described

  20. First series of total robotic hysterectomy (TRH) using new integrated table motion for the da Vinci Xi: feasibility, safety and efficacy.

    Science.gov (United States)

    Giannini, Andrea; Russo, Eleonora; Mannella, Paolo; Palla, Giulia; Pisaneschi, Silvia; Cecchi, Elena; Maremmani, Michele; Morelli, Luca; Perutelli, Alessandra; Cela, Vito; Melfi, Franca; Simoncini, Tommaso

    2017-08-01

    To present the first case series of total robotic hysterectomy (TRH), using integrated table motion (ITM), which is a new feature comprising a unique operating table by Trumpf Medical that communicates wirelessly with the da Vinci Xi surgical system. ITM has been specifically developed to improve multiquadrant robotic surgery such as that conducted in colorectal surgery. Between May and October 2015, a prospective post-market study was conducted on ITM in the EU in 40 cases from different specialties. The gynecological study group comprised 12 patients. Primary endpoints were ITM feasibility, safety and efficacy. Ten patients underwent TRH. Mean number of ITM moves was three during TRH; there were 31 instances of table moves in the ten procedures. Twenty-eight of 31 ITM moves were made to gain internal exposure. The endoscope remained inserted during 29 of the 31 table movements (94%), while the instruments remained inserted during 27 of the 31 moves (87%). No external instrument collisions or other problems related to the operating table were noted. There were no ITM safety-related observations and no adverse events. This preliminary study demonstrated the feasibility, safety and efficacy of ITM for the da Vinci Xi surgical system in TRH. ITM was safe, with no adverse events related to its use. Further studies will be useful to define the real role and potential benefit of ITM in gynecological surgery.

  1. Thermodynamic Characterization of Hydration Sites from Integral Equation-Derived Free Energy Densities: Application to Protein Binding Sites and Ligand Series.

    Science.gov (United States)

    Güssregen, Stefan; Matter, Hans; Hessler, Gerhard; Lionta, Evanthia; Heil, Jochen; Kast, Stefan M

    2017-07-24

    Water molecules play an essential role for mediating interactions between ligands and protein binding sites. Displacement of specific water molecules can favorably modulate the free energy of binding of protein-ligand complexes. Here, the nature of water interactions in protein binding sites is investigated by 3D RISM (three-dimensional reference interaction site model) integral equation theory to understand and exploit local thermodynamic features of water molecules by ranking their possible displacement in structure-based design. Unlike molecular dynamics-based approaches, 3D RISM theory allows for fast and noise-free calculations using the same detailed level of solute-solvent interaction description. Here we correlate molecular water entities instead of mere site density maxima with local contributions to the solvation free energy using novel algorithms. Distinct water molecules and hydration sites are investigated in multiple protein-ligand X-ray structures, namely streptavidin, factor Xa, and factor VIIa, based on 3D RISM-derived free energy density fields. Our approach allows the semiquantitative assessment of whether a given structural water molecule can potentially be targeted for replacement in structure-based design. Finally, PLS-based regression models from free energy density fields used within a 3D-QSAR approach (CARMa - comparative analysis of 3D RISM Maps) are shown to be able to extract relevant information for the interpretation of structure-activity relationship (SAR) trends, as demonstrated for a series of serine protease inhibitors.

  2. Infinite series

    CERN Document Server

    Hirschman, Isidore Isaac

    2014-01-01

    This text for advanced undergraduate and graduate students presents a rigorous approach that also emphasizes applications. Encompassing more than the usual amount of material on the problems of computation with series, the treatment offers many applications, including those related to the theory of special functions. Numerous problems appear throughout the book.The first chapter introduces the elementary theory of infinite series, followed by a relatively complete exposition of the basic properties of Taylor series and Fourier series. Additional subjects include series of functions and the app

  3. 42 CFR 84.1135 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, hoods... Air-Purifying High Efficiency Respirators and Combination Gas Masks § 84.1135 Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. (a) Half-mask facepieces...

  4. 42 CFR 84.135 - Half-mask facepieces, full facepieces, hoods, and helmets; fit; minimum requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, hoods, and... OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air Respirators § 84.135 Half-mask facepieces, full facepieces, hoods, and helmets; fit; minimum requirements. (a) Half-mask facepieces and full facepieces shall...

  5. 42 CFR 84.198 - Half-mask facepieces, full facepieces, mouthpieces, hoods, and helmets; fit; minimum requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, mouthpieces... APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Chemical Cartridge Respirators § 84.198 Half-mask facepieces, full facepieces, mouthpieces, hoods, and helmets; fit; minimum requirements. (a) Half-mask facepieces...

  6. 42 CFR 84.175 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, hoods....175 Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. (a) Half-mask facepieces and full facepieces shall be designed and constructed to fit persons with...

  7. Simulation study comparing the helmet-chin PET with a cylindrical PET of the same number of detectors

    Science.gov (United States)

    Ahmed, Abdella M.; Tashima, Hideaki; Yoshida, Eiji; Nishikido, Fumihiko; Yamaya, Taiga

    2017-06-01

    There is a growing interest in developing brain PET scanners with high sensitivity and high spatial resolution for early diagnosis of neurodegenerative diseases and studies of brain functions. Sensitivity of the PET scanner can be improved by increasing the solid angle. However, conventional PET scanners are designed based on a cylindrical geometry, which may not be the most efficient design for brain imaging in terms of the balance between sensitivity and cost. We proposed a dedicated brain PET scanner based on a hemispheric shape detector and a chin detector (referred to as the helmet-chin PET), which is designed to maximize the solid angle by increasing the number of lines-of-response in the hemisphere. The parallax error, which PET scanners with a large solid angle tend to have, can be suppressed by the use of depth-of-interaction detectors. In this study, we carry out a realistic evaluation of the helmet-chin PET using Monte Carlo simulation based on the 4-layer GSO detector which consists of a 16  ×  16  ×  4 array of crystals with dimensions of 2.8  ×  2.8  ×  7.5 mm3. The purpose of this simulation is to show the gain in imaging performance of the helmet-chin PET compared with the cylindrical PET using the same number of detectors in each configuration. The sensitivity of the helmet-chin PET evaluated with a cylindrical phantom has a significant increase, especially at the top of the (field-of-view) FOV. The peak-NECR of the helmet-chin PET is 1.4 times higher compared to the cylindrical PET. The helmet-chin PET provides relatively low noise images throughout the FOV compared to the cylindrical PET which exhibits enhanced noise at the peripheral regions. The results show the helmet-chin PET can significantly improve the sensitivity and reduce the noise in the reconstructed images.

  8. Changes in motorcycle-related injuries and deaths after mandatory motorcycle helmet law in a district of Vietnam.

    Science.gov (United States)

    Ha, Ninh Thi; Ederer, David; Vo, Van Anh Ha; Pham, An Van; Mounts, Anthony; Nolen, Leisha D; Sugerman, David

    2018-01-02

    Our study measured the change in head injuries and deaths among motorcycle users in Cu Chi district, a suburban district of Ho Chi Minh City. Hospital records for road traffic injuries (RTIs) were collected from the Cu Chi Trauma Centre and motorcycle-related death records were obtained from mortality registries in commune health offices. Head injury severity was categorized using the Abbreviated Injury Score (AIS). Rate ratios (RRs) were used to compare rates pre- and post-law (2005/2006-2009/2010). Cu Chi's population, stratified by year, age, and sex, was used as the denominator. Of records identifying the transportation mode at the time of injury, motorcyclists accounted for most injuries (3,035, 87%) and deaths (238, 90%). Head injuries accounted for 70% of motorcycle-related hospitalizations. Helmet use was not recorded in any death records and not in 97% of medical records. Males accounted for most injuries (73%) and deaths (88%). The median age was 28 years and 32 years for injuries and deaths, respectively. Compared to the pre-law period, rates of motorcycle injuries (RR = 0.53; 95% confidence interval [CI], 0.49-0.58), head injuries (RR = 0.35; 95% CI, 0.31-0.39), severe head injuries (RR = 0.47; 95% CI, 0.34-0.63), and deaths (RR = 0.69; 95% CI, 0.53-0.89) significantly decreased in the post-law period. Rates of head injuries and deaths among motorcycle riders decreased significantly after implementation of the mandatory helmet law in Vietnam. To further examine the impact of the motorcycle helmet law, including compliance and helmet quality, further emphasis should be placed on gathering helmet use data from injured motorcyclists.

  9. Socioeconomic Inequalities in Nonuse of Seatbelts in Cars and Helmets on Motorcycles among People Living in Kurdistan Province, Iran.

    Science.gov (United States)

    Moradi, Ghobad; Malekafzali Ardakani, Hossein; Majdzadeh, Reza; Bidarpour, Farzam; Mohammad, Kazem; Holakouie-Naieni, Kourosh

    2014-09-01

    The aim of this study was to determine the socioeconomic inequalities in nonuse of seatbelts in cars and helmets on motorcycles in Kurdistan Province, west of Iran, 2009. The data used in this study was collected from the data gathered in non-communicable disease surveillance system (NCDSS) in 2009 in Kurdistan. A total of 1000 people were included in this study. The outcome variable of this study was the nonuse of seatbelts and helmets. The socio-economic status (SES) was calculated based on participants' residential area and assets using Principal Component Analysis (PCA) method. The concentration index, concentration curve, and comparison of Odds Ratio (OR) in different SES groups were used to measure the socioeconomic inequalities using logistic regression. In order to determine the contribution of determinants of inequality, decomposition analysis was used. The prevalence of nonuse of seatbelts in cars and helmets on motorcycles were 47.5%, 95%CI [44%, 55%], respectively. The Concentration index was -0.097, CI [-0.148, -0.046]. The OR of nonuse of seatbelts in cars and helmets on motorcycles in the richest group compared with the poorest group was 0.39, 95%CI [0.23, 0.68]. The results of the decomposition analysis showed that 34% of inequalities were due to SES, 47% were due to residential area, and 12% were due to unknown factors. There is a reverse association between SES and nonuse of seatbelts in cars and helmets on motorcycles. This issue must be considered while planning to reduce traffic accidents injuries.

  10. Work of breathing using different interfaces in spontaneous positive pressure ventilation: helmet, face-mask, and endotracheal tube.

    Science.gov (United States)

    Oda, Shinya; Otaki, Kei; Yashima, Nozomi; Kurota, Misato; Matsushita, Sachiko; Kumasaka, Airi; Kurihara, Hutaba; Kawamae, Kaneyuki

    2016-08-01

    Noninvasive positive pressure ventilation (NPPV) using a helmet is expected to cause inspiratory trigger delay due to the large collapsible and compliant chamber. We compared the work of breathing (WOB) of NPPV using a helmet or a full face-mask with that of invasive ventilation by tracheal intubation. We used a lung model capable of simulating spontaneous breathing (LUNGOO; Air Water Inc., Japan). LUNGOO was set at compliance (C) = 50 mL/cmH2O and resistance (R) = 5 cmH2O/L/s for normal lung simulation, C = 20 mL/cmH2O and R = 5 cmH2O/L/s for restrictive lung, and C = 50 mL/cmH2O and R = 20 cmH2O/L/s for obstructive lung. Muscle pressure was fixed at 25 cmH2O and respiratory rate at 20 bpm. Pressure support ventilation and continuous positive airway pressure were performed with each interface placed on a dummy head made of reinforced plastic that was connected to LUNGOO. We tested the inspiratory WOB difference between the interfaces with various combinations of ventilator settings (positive end-expiratory pressure 5 cmH2O; pressure support 0, 5, and 10 cmH2O). In the normal lung and restrictive lung models, WOB decreased more with the face-mask than the helmet, especially when accompanied by the level of pressure support. In the obstructive lung model, WOB with the helmet decreased compared with the other two interfaces. In the mixed lung model, there were no significant differences in WOB between the three interfaces. NPPV using a helmet is more effective than the other interfaces for WOB in obstructive lung disease.

  11. Influence of an Enforcement Campaign on Seat-Belt and Helmet Wearing, Karachi-Hala Highway, Pakistan

    Science.gov (United States)

    Bhatti, Junaid A.; Ejaz, Kiran; Razzak, Junaid A.; Tunio, Israr Ali; Sodhar, Irshad

    2011-01-01

    This study assessed to what extent an enforcement campaign influenced seat-belt and helmet wearing on a Pakistani highway. The study setting was the Karachi-Hala highway where a traffic enforcement campaign was conducted from Dec 2009 to Feb 2010. Seat-belt and helmet wearing were observed in Nov 2009 and Apr 2010 at Karachi toll plaza. Differences in wearing rates as a function of occupants’ age, sex, and vehicle type were compared between the two periods. On average, 9 119 (Standard deviation=1 896) traffic citations were issued per month from Aug 2009 to Feb 2010; 4.2% of which were for not wearing helmet. A 22.5% increase in citations was observed for Dec 2009 to Feb 2010 periods compared with Aug 2009 to Oct 2009 periods. Nearly six thousand four-wheeled and four hundred two-wheeled motorized vehicle occupants were observed in Nov 2009 and Apr 2010. Overall, two of the five drivers and one of the five front seat occupants wore seat belts. This proportion was significantly higher in drivers and front-seat occupants of cars than those of heavier vehicles. Similarly, one of two motorcyclists used a helmet but this proportion was 5.8% for pillion riders in Nov 2009. The increased enforcement had a limited influence on belt wearing in drivers (+4.0%; 95% Confidence Interval [95%CI]=1.8–6.1) and occupants (+6.2%; 95%CI=4.2–8.2). A higher increase was observed for motorcyclists (+9.8%; 95%CI=2.6–16.8) and pillion riders (+12.8%; 95%CI=5.4, 20.5). These results suggested that serious efforts are required to increase seat-belt and helmet use on Pakistani highways. Improving enforcement resources, increased fines, not allowing such vehicles on roads, and awareness campaigns targeting drivers of heavy vehicles might increase wearing rates in Pakistan. PMID:22105384

  12. Sonographic Analysis of Changes in Skull Shape After Cranial Molding Helmet Therapy in Infants With Deformational Plagiocephaly.

    Science.gov (United States)

    Kwon, Dong Rak

    2016-04-01

    -The purpose of this study was to investigate the changes in skull shape on sonography after cranial molding helmet therapy in infants with deformational plagiocephaly. -Twenty-six infants who were treated with cranial molding helmet therapy were recruited. Caliper and sonographic measurements were performed. The lateral length of the affected and unaffected sides of the skull and cranial vault asymmetry index were measured with calipers. The occipital angle, defined as the angle between lines projected along the lambdoid sutures of the skull, was calculated by sonography. The occipital angle difference and occipital angle ratio were also measured. All caliper and sonographic measurements were performed in each infant twice before and twice after treatment. -The study group included 12 male and 14 female infants with a mean age ± SD of 6.2 ± 3.5 months. The mean treatment duration was 6.0 ± 2.5 months. The difference in lateral length before and after helmet therapy was significantly greater on the affected skull than the unaffected skull (16.7 ± 12.7 versus 9.0 ± 13.4 mm; P skull than the unaffected skull (-5.7° ± 7.3° versus 4.2° ± 7.9°; P < .01). The cranial vault asymmetry index and occipital angle ratio were significantly reduced after helmet therapy (cranial vault asymmetry index, 9.3% ± 2.3% versus 3.5% ± 3.0%; occipital angle ratio, 1.07 ± 0.05 versus 1.01 ± 0.01; P < .05). -These results suggest that occipital angle measurements using sonography, combined with cephalometry, could provide a better understanding of the therapeutic effects of cranial molding helmet therapy in infants with deformational plagiocephaly. © 2016 by the American Institute of Ultrasound in Medicine.

  13. Integrated Trauma-Focused Cognitive-Behavioural Therapy for Post-traumatic Stress and Psychotic Symptoms: A Case-Series Study Using Imaginal Reprocessing Strategies

    Directory of Open Access Journals (Sweden)

    Nadine Keen

    2017-06-01

    Full Text Available Despite high rates of trauma in individuals with psychotic symptoms, post-traumatic stress symptoms are frequently overlooked in clinical practice. There is also reluctance to treat post-traumatic symptoms in case the therapeutic procedure of reprocessing the trauma exacerbates psychotic symptoms. Recent evidence demonstrates that it is safe to use reprocessing strategies in this population. However, most published studies have been based on treating post-traumatic symptoms in isolation from psychotic symptoms. The aims of the current case series were to assess the acceptability, feasibility, and preliminary effectiveness of integrating cognitive-behavioural approaches for post-traumatic stress and psychotic symptoms into a single protocol. Nine participants reporting distressing psychotic and post-traumatic symptoms were recruited from a specialist psychological therapies service for psychosis. Clients were assessed at five time points (baseline, pre, mid, end of therapy, and at 6+ months of follow-up by an independent assessor on measures of current symptoms of psychosis, post-traumatic stress, emotional problems, and well-being. Therapy was formulation based and individualised, depending on presenting symptoms and trauma type. It consisted of five broad, flexible phases, and included imaginal reprocessing strategies (reliving and/or rescripting. The intervention was well received, with positive post-therapy feedback and satisfaction ratings. Unusually for this population, no-one dropped out of therapy. Post therapy, all but one (88% of participants achieved a reliable improvement compared to pre-therapy on at least one outcome measure: post-traumatic symptoms (63%, voices (25%, delusions (50%, depression (50%, anxiety (36%, and well-being (40%. Follow-up assessments were completed by 78% (n = 7 of whom 86% (n = 6 maintained at least one reliable improvement. Rates of improvements following therapy (average of 44% across measures post

  14. Divergent Perturbation Series

    International Nuclear Information System (INIS)

    Suslov, I.M.

    2005-01-01

    Various perturbation series are factorially divergent. The behavior of their high-order terms can be determined by Lipatov's method, which involves the use of instanton configurations of appropriate functional integrals. When the Lipatov asymptotic form is known and several lowest order terms of the perturbation series are found by direct calculation of diagrams, one can gain insight into the behavior of the remaining terms of the series, which can be resummed to solve various strong-coupling problems in a certain approximation. This approach is demonstrated by determining the Gell-Mann-Low functions in φ 4 theory, QED, and QCD with arbitrary coupling constants. An overview of the mathematical theory of divergent series is presented, and interpretation of perturbation series is discussed. Explicit derivations of the Lipatov asymptotic form are presented for some basic problems in theoretical physics. A solution is proposed to the problem of renormalon contributions, which hampered progress in this field in the late 1970s. Practical perturbation-series summation schemes are described both for a coupling constant of order unity and in the strong-coupling limit. An interpretation of the Borel integral is given for 'non-Borel-summable' series. Higher order corrections to the Lipatov asymptotic form are discussed

  15. The neurosurgeon as baseball fan and inventor: Walter Dandy and the batter's helmet.

    Science.gov (United States)

    Brewster, Ryan; Bi, Wenya Linda; Smith, Timothy R; Gormley, William B; Dunn, Ian F; Laws, Edward R

    2015-07-01

    Baseball maintains one of the highest impact injury rates in all athletics. A principal causative factor is the "beanball," referring to a pitch thrown directly at a batter's head. Frequent morbidities elicited demand for the development of protective gear development in the 20th century. In this setting, Dr. Walter Dandy was commissioned to design a "protective cap" in 1941. His invention became widely adopted by professional baseball and inspired subsequent generations of batting helmets. As a baseball aficionado since his youth, Walter Dandy identified a natural partnership between baseball and medical practice for the reduction of beaning-related brain injuries. This history further supports the unique position of neurosurgeons to leverage clinical insights, inform innovation, and expand service to society.

  16. A universal and smart helmet-mounted display of large FOV

    Science.gov (United States)

    Zhang, Nan; Weng, Dongdong; Wang, Yongtian; Li, Xuan; Liu, Youhai

    2011-11-01

    HMD (head-mounted display) is an important virtual reality device, which has played a vital role in VR application system. Compared with traditional HMD which cannot be applied in the daily life owing to their disadvantage on the price and performance, a new universal and smart Helmet-Mounted Display of large FOV uses excellent performance and widespread popularity as its starting point. By adopting simplified visual system and transflective system that combines the transmission-type and reflection-type display system with transflective glass based on the Huggens-Fresnel principle, we have designed a HMD with wide field of view, which can be easy to promote and popularize. Its resolution is 800*600, and field of view is 36.87°(vertical)* 47.92°(horizontal). Its weight is only 1080g. It has caught up with the advanced world levels.

  17. Helmet-mounted displays in long-range-target visual acquisition

    Science.gov (United States)

    Wilkins, Donald F.

    1999-07-01

    Aircrews have always sought a tactical advantage within the visual range (WVR) arena -- usually defined as 'see the opponent first.' Even with radar and interrogation foe/friend (IFF) systems, the pilot who visually acquires his opponent first has a significant advantage. The Helmet Mounted Cueing System (HMCS) equipped with a camera offers an opportunity to correct the problems with the previous approaches. By utilizing real-time image enhancement technique and feeding the image to the pilot on the HMD, the target can be visually acquired well beyond the range provided by the unaided eye. This paper will explore the camera and display requirements for such a system and place those requirements within the context of other requirements, such as weight.

  18. Designing safer composite helmets to reduce rotational accelerations during oblique impacts.

    Science.gov (United States)

    Mosleh, Yasmine; Cajka, Martin; Depreitere, Bart; Vander Sloten, Jos; Ivens, Jan

    2018-05-01

    Oblique impact is the most common accident situation that occupants in traffic accidents or athletes in professional sports experience. During oblique impact, the human head is subjected to a combination of linear and rotational accelerations. Rotational movement is known to be responsible for traumatic brain injuries. In this article, composite foam with a column/matrix composite configuration is proposed for head protection applications to replace single-layer uniform foam, to better attenuate rotational movement of the head during oblique impacts. The ability of composite foam in the mitigation of rotational head movement is studied by performing finite element (FE) simulations of oblique impact on flat and helmet shape specimens. The performance of composite foam with respect to parameters such as compliance of the matrix foam and the number, size and cross-sectional shape of the foam columns is explored in detail, and subsequently an optimized structure is proposed. The simulation results show that using composite foam instead of single-layer foam, the rotational acceleration and velocity of the headform can be significantly reduced. The parametric study indicates that using a more compliant matrix foam and by increasing the number of columns in the composite foam configuration, the rotation can be further mitigated. This was confirmed by experimental results. The simulation results were also analyzed based on global head injury criteria such as head injury criterion, rotational injury criterion, brain injury criterion and generalized acceleration model for brain injury threshold which further confirmed the superior performance of composite foam versus single-layer homogeneous expanded polystyrene foam. The findings of simulations give invaluable information for design of protective helmets or, for instance, headliners for the automotive industry.

  19. Effects of videogame distraction and a virtual reality type head-mounted display helmet on cold pressor pain in young elementary school-aged children.

    Science.gov (United States)

    Dahlquist, Lynnda M; Weiss, Karen E; Law, Emily F; Sil, Soumitri; Herbert, Linda Jones; Horn, Susan Berrin; Wohlheiter, Karen; Ackerman, Claire Sonntag

    2010-07-01

    This study examined the effects of videogame distraction and a virtual reality (VR) type head-mounted display helmet for children undergoing cold pressor pain. Fifty children between the ages of 6 and 10 years underwent a baseline cold pressor trial followed by two cold pressor trials in which interactive videogame distraction was delivered via a VR helmet or without a VR helmet in counterbalanced order. As expected, children demonstrated significant improvements in pain threshold and pain tolerance during both distraction conditions. However, the two distraction conditions did not differ in effectiveness. Using the VR helmet did not result in improved pain tolerance over and above the effects of interactive videogame distraction without VR technology. Clinical implications and possible developmental differences in elementary school-aged children's ability to use VR technology are discussed.

  20. North Caucasian helmets from the Crimean Tatar Nobility from the Museum of Topkapi Palace (Istanbul, Turkey. Design Features, Design and Combat Use

    Directory of Open Access Journals (Sweden)

    Leonid A. Bobrov

    2016-06-01

    Full Text Available The article describes the helmets of the Crimean Tatar nobility stored in the Museum of Topkapi Palace (Istanbul, Republic of Turkey. Based on the analysis of design and system design determined that hats were made of Circassian masters of the XVIII century. Helmet No. 1/810 in shape of the dome relates to the type of bevel. Forged a gilded crown complemented by ornamented Hoop, pads, conical pommel, and ringed barmitsa Persian type. In Cherkessia similar hats were known as Tang (from the Arab. "the Taj", i.e. "crown". It is most likely that the owner of the helmet was the last Noureddine Crimean khanate, Bahadir Giray (1789-1792 was the son of MuminGirei (?-1747 and grandson of Khan Saadet Giray IV (1717-1724. Helmet No. 1/812по the shape of a dome refers to the type of conal. Forged iron gilded crown complemented by ornamented Hoop, plates and funnel-shaped topping. Dome placed on the manufacture date of the helmet – "1180 of the Hijra" (i.e., 1766-1767 in the Gregorian calendar, as well as the inscription: "Owner Sultan Ali", "Muhammad Giray", "Mansour". Helmet No. 1/811по the shape of a dome refers to the type of cylindrical. Faceted iron supplemented gilt crown ornamented Hoop, conical pommel and Aventail Persian type. On the front of hats placed the inscription, "Sultan Mohammed Ibn AdilGiray". This suggests that the owner of the helmet could be the son of Nureddin (1718, serasker Budjaka and Editcol (1727-1728 Adil Ibn Selim I Giray or seraskier EditcolAdil Ibn Selim III Giray (1766-1767. In the framework of the interdisciplinary research were made copies of these helmets, which have become the object of scientific experiments aimed at the study of the functional properties of the considered hats. According to the results of the experimental tests it was found that all three of the helmet provide very reliable protection of the head and neck of the warrior from the cutting and cut-and-cutting blows of the enemy. The saber blade

  1. 'Integration'

    DEFF Research Database (Denmark)

    Olwig, Karen Fog

    2011-01-01

    , while the countries have adopted disparate policies and ideologies, differences in the actual treatment and attitudes towards immigrants and refugees in everyday life are less clear, due to parallel integration programmes based on strong similarities in the welfare systems and in cultural notions...... of equality in the three societies. Finally, it shows that family relations play a central role in immigrants’ and refugees’ establishment of a new life in the receiving societies, even though the welfare society takes on many of the social and economic functions of the family....

  2. Chart Series

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) offers several different Chart Series with data on beneficiary health status, spending, operations, and quality...

  3. GPS Position Time Series @ JPL

    Science.gov (United States)

    Owen, Susan; Moore, Angelyn; Kedar, Sharon; Liu, Zhen; Webb, Frank; Heflin, Mike; Desai, Shailen

    2013-01-01

    Different flavors of GPS time series analysis at JPL - Use same GPS Precise Point Positioning Analysis raw time series - Variations in time series analysis/post-processing driven by different users. center dot JPL Global Time Series/Velocities - researchers studying reference frame, combining with VLBI/SLR/DORIS center dot JPL/SOPAC Combined Time Series/Velocities - crustal deformation for tectonic, volcanic, ground water studies center dot ARIA Time Series/Coseismic Data Products - Hazard monitoring and response focused center dot ARIA data system designed to integrate GPS and InSAR - GPS tropospheric delay used for correcting InSAR - Caltech's GIANT time series analysis uses GPS to correct orbital errors in InSAR - Zhen Liu's talking tomorrow on InSAR Time Series analysis

  4. Linking the Negative Binomial and Logarithmic Series Distributions via their Associated Series

    OpenAIRE

    SADINLE, MAURICIO

    2008-01-01

    The negative binomial distribution is associated to the series obtained by taking derivatives of the logarithmic series. Conversely, the logarithmic series distribution is associated to the series found by integrating the series associated to the negative binomial distribution. The parameter of the number of failures of the negative binomial distribution is the number of derivatives needed to obtain the negative binomial series from the logarithmic series. The reasoning in this article could ...

  5. Impact of mandatory motorcycle helmet wearing legislation on head injuries in Viet Nam: results of a preliminary analysis.

    Science.gov (United States)

    Passmore, Jonathon; Tu, Nguyen Thi Hong; Luong, Mai Anh; Chinh, Nguyen Duc; Nam, Nguyen Phuong

    2010-04-01

    To compare estimated prevalence of head injuries among road traffic injury patients admitted to hospitals, before and after the introduction of a mandatory helmet law in the Socialist Republic of Viet Nam. Before and after study of all road traffic injury patients with head injuries admitted to 20 provincial and central hospitals 3 months before and after the new law came into effect on 15 December 2007. Relative risk was computed and comparison made for the periods of 3 months before and after the new law. The study found a 16 percent reduction in the risk of road traffic head injuries (4683 to 3522; relative risk [RR] 0.84; 95% confidence interval [CI] 0.81-0.87) and an 18 percent reduction in the risk of road traffic death (deaths in hospital plus injured patients discharged to die at home; 566 to 417; RR 0.82; 95% CI 0.73-0.93). Over the first 3 months of the comprehensive mandatory helmet legislation there has been a significant reduction in the risk of road traffic head injuries among patients admitted to 20 hospitals. The Viet Nam Government's decision to require all motorcycle riders and passengers to wear helmets is suspected of leading to positive road safety benefits and should be seen as a policy example for other low- and middle-income countries with a high utilization of motorcycles for transport.

  6. Elevated Extravascular Lung Water Index (ELWI) as a Predictor of Failure of Continuous Positive Airway Pressure Via Helmet (Helmet-CPAP) in Patients With Acute Respiratory Failure After Major Surgery.

    Science.gov (United States)

    Redondo Calvo, Francisco Javier; Bejarano Ramirez, Natalia; Uña Orejon, Rafael; Villazala Garcia, Ruben; Yuste Peña, Ana Sofia; Belda, Francisco Javier

    2015-11-01

    NIV is increasingly used for prevention and treatment of respiratory complications and failure. Some of them are admitted to the PACU with advanced hemodynamic monitors which allow quantification of Extravascular Lung Water (EVLW) by transpulmonary thermodilution technique (TPTD) and Pulmonary Vascular Permeability (PVP) providing information on lung edema. The objective of this study was to ascertain if EVLW Index and PVP Index may predict failure (intubation) or success (non-intubation) in patients developing acute respiratory failure (ARF) in the postoperative period following major abdominal surgery, where the first line of treatment was non-invasive continuous positive airway pressure via a helmet. Hemodynamic variables, EVLWI and PVPI were monitored with a transpulmonary thermodilution hemodynamic monitor device (PiCCO™) before and after the application of CPAP. Avoidance of intubation was observed in 66% of patients with Helmet-CPAP. In these patients after the first hour of application of CPAP, PaO2/FiO2 ratio significantly increased (303.33±65.2 vs. 141.6±14.6, P<.01). Before starting Helmet-CPAP values of EVLWI and PVPI were significantly lower in non-intubated patients (EVLWI 8.6±1.08 vs. 11.8±0.99ml/kg IBW, P<.01 and PVPI 1.7±0.56 vs. 3.0±0.88, P<.01). An optimal cut-off value for EVLWI was established at 9.5, and at 2.45 for PVPI (sensitivity of 0.7; specificity of 0.9, P<.01). In this type of patient the physiological parameters that predict the failure of Helmet-CPAP with the greatest accuracy were the value of the EVLWI and PVPI before Helmet-CPAP institution and the PaO2/FiO2 ratio and the respiratory rate after one hour of CPAP. Copyright © 2014 SEPAR. Published by Elsevier Espana. All rights reserved.

  7. Cochrane Qualitative and Implementation Methods Group guidance series-paper 5: methods for integrating qualitative and implementation evidence within intervention effectiveness reviews.

    Science.gov (United States)

    Harden, Angela; Thomas, James; Cargo, Margaret; Harris, Janet; Pantoja, Tomas; Flemming, Kate; Booth, Andrew; Garside, Ruth; Hannes, Karin; Noyes, Jane

    2018-05-01

    The Cochrane Qualitative and Implementation Methods Group develops and publishes guidance on the synthesis of qualitative and mixed-method evidence from process evaluations. Despite a proliferation of methods for the synthesis of qualitative research, less attention has focused on how to integrate these syntheses within intervention effectiveness reviews. In this article, we report updated guidance from the group on approaches, methods, and tools, which can be used to integrate the findings from quantitative studies evaluating intervention effectiveness with those from qualitative studies and process evaluations. We draw on conceptual analyses of mixed methods systematic review designs and the range of methods and tools that have been used in published reviews that have successfully integrated different types of evidence. We outline five key methods and tools as devices for integration which vary in terms of the levels at which integration takes place; the specialist skills and expertise required within the review team; and their appropriateness in the context of limited evidence. In situations where the requirement is the integration of qualitative and process evidence within intervention effectiveness reviews, we recommend the use of a sequential approach. Here, evidence from each tradition is synthesized separately using methods consistent with each tradition before integration takes place using a common framework. Reviews which integrate qualitative and process evaluation evidence alongside quantitative evidence on intervention effectiveness in a systematic way are rare. This guidance aims to support review teams to achieve integration and we encourage further development through reflection and formal testing. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Bimolecular encounters and re-encounters (cage effect) of a spin-labeled analogue of cholestane in a series of n-alkanes: effect of anisotropic exchange integral.

    Science.gov (United States)

    Vandenberg, Andrew D; Bales, Barney L; Salikhov, K M; Peric, Miroslav

    2012-12-27

    Electron paramagnetic resonance (EPR) spectra of the nitroxide spin probe 3β-doxyl-5α-cholestane (CSL) are studied as functions of the molar concentration, c, and the temperature, T, in a series of n-alkanes. The results are compared with a similar study of a much smaller spin probe, perdeuterated 2,2,6,6-tetramethyl-4-oxopiperidine-1-oxyl (pDT). The Heisenberg spin exchange (HSE) rate constants, K(ex), of CSL are similar in hexane, octane, and decane and are about one-half of those for pDT in the same solvents. They are also about one-half of the Stokes-Einstein-Perrin prediction. This reduction in HSE efficiency is attributed to an effective steric factor, f(eff), which was evaluated by comparing the results with the Stokes-Einstein-Perrin prediction or with pDT, and it is equal to 0.49 ± 0.03, independent of temperature. The unpaired spin density in CSL is localized near one end of the long molecule, so the exchange integral, J, leading to HSE, is expected to be large in some collisions and small in others; thus, J is modeled by an ideal distribution of values of J = J(0) with probability f and J = 0 with probability (1 - f). Because of rotational and translation diffusion during contact and between re-encounters of the probe, the effective steric factor is predicted to be f(eff) = f(1/2). Estimating the fraction of the surface of CSL with rich spin density yields a theoretical estimate of f(eff) = 0.59 ± 0.08, in satisfactory agreement with experiment. HSE is well described by simple hydrodynamic theory, with only a small dependence on solvent-probe relative sizes at the same value of T/η, where η is the viscosity of the solvent. This result is probably due to a fortuitous interplay between long- and short-range effects that describe diffusion processes over relatively large distances. In contrast, dipole-dipole interactions (DD) as measured by the line broadening, B(dip), and the mean time between re-encounters within the cage, τ(RE), vary significantly

  9. Emergency face-mask removal effectiveness: a comparison of traditional and nontraditional football helmet face-mask attachment systems.

    Science.gov (United States)

    Swartz, Erik E; Belmore, Keith; Decoster, Laura C; Armstrong, Charles W

    2010-01-01

    Football helmet face-mask attachment design changes might affect the effectiveness of face-mask removal. To compare the efficiency of face-mask removal between newly designed and traditional football helmets. Controlled laboratory study. Applied biomechanics laboratory. Twenty-five certified athletic trainers. The independent variable was face-mask attachment system on 5 levels: (1) Revolution IQ with Quick Release (QR), (2) Revolution IQ with Quick Release hardware altered (QRAlt), (3) traditional (Trad), (4) traditional with hardware altered (TradAlt), and (5) ION 4D (ION). Participants removed face masks using a cordless screwdriver with a back-up cutting tool or only the cutting tool for the ION. Investigators altered face-mask hardware to unexpectedly challenge participants during removal for traditional and Revolution IQ helmets. Participants completed each condition twice in random order and were blinded to hardware alteration. Removal success, removal time, helmet motion, and rating of perceived exertion (RPE). Time and 3-dimensional helmet motion were recorded. If the face mask remained attached at 3 minutes, the trial was categorized as unsuccessful. Participants rated each trial for level of difficulty (RPE). We used repeated-measures analyses of variance (α  =  .05) with follow-up comparisons to test for differences. Removal success was 100% (48 of 48) for QR, Trad, and ION; 97.9% (47 of 48) for TradAlt; and 72.9% (35 of 48) for QRAlt. Differences in time for face-mask removal were detected (F(4,20)  =  48.87, P  =  .001), with times ranging from 33.96 ± 14.14 seconds for QR to 99.22 ± 20.53 seconds for QRAlt. Differences were found in range of motion during face-mask removal (F(4,20)  =  16.25, P  =  .001), with range of motion from 10.10° ± 3.07° for QR to 16.91° ± 5.36° for TradAlt. Differences also were detected in RPE during face-mask removal (F(4,20)  =  43.20, P  =  .001), with participants reporting average

  10. Emergency Face-Mask Removal Effectiveness: A Comparison of Traditional and Nontraditional Football Helmet Face-Mask Attachment Systems

    Science.gov (United States)

    Swartz, Erik E.; Belmore, Keith; Decoster, Laura C.; Armstrong, Charles W.

    2010-01-01

    Abstract Context: Football helmet face-mask attachment design changes might affect the effectiveness of face-mask removal. Objective: To compare the efficiency of face-mask removal between newly designed and traditional football helmets. Design: Controlled laboratory study. Setting: Applied biomechanics laboratory. Participants: Twenty-five certified athletic trainers. Intervention(s): The independent variable was face-mask attachment system on 5 levels: (1) Revolution IQ with Quick Release (QR), (2) Revolution IQ with Quick Release hardware altered (QRAlt), (3) traditional (Trad), (4) traditional with hardware altered (TradAlt), and (5) ION 4D (ION). Participants removed face masks using a cordless screwdriver with a back-up cutting tool or only the cutting tool for the ION. Investigators altered face-mask hardware to unexpectedly challenge participants during removal for traditional and Revolution IQ helmets. Participants completed each condition twice in random order and were blinded to hardware alteration. Main Outcome Measure(s): Removal success, removal time, helmet motion, and rating of perceived exertion (RPE). Time and 3-dimensional helmet motion were recorded. If the face mask remained attached at 3 minutes, the trial was categorized as unsuccessful. Participants rated each trial for level of difficulty (RPE). We used repeated-measures analyses of variance (α  =  .05) with follow-up comparisons to test for differences. Results: Removal success was 100% (48 of 48) for QR, Trad, and ION; 97.9% (47 of 48) for TradAlt; and 72.9% (35 of 48) for QRAlt. Differences in time for face-mask removal were detected (F4,20  =  48.87, P  =  .001), with times ranging from 33.96 ± 14.14 seconds for QR to 99.22 ± 20.53 seconds for QRAlt. Differences were found in range of motion during face-mask removal (F4,20  =  16.25, P  =  .001), with range of motion from 10.10° ± 3.07° for QR to 16.91° ± 5.36° for TradAlt. Differences also were detected

  11. The Economic Impact of Helmet Use on Motorcycle Accidents: A Systematic Review and Meta-analysis of the Literature from the Past 20 Years.

    Science.gov (United States)

    Kim, Chang-Yeon; Wiznia, Daniel H; Averbukh, Leon; Dai, Feng; Leslie, Michael P

    2015-01-01

    The incidence and cost of motorcycle accidents are projected to increase. Motorcycle helmets are accepted as an effective strategy for reducing the morbidity and therefore the cost of motorcycle accidents. Despite this, states have continued to repeal helmet laws in the past 20 years. In addition, variations in the methodologies and outcomes of published reports have contributed to uncertainty regarding the health care dollars saved due to motorcycle helmet use. The purpose of this systematic review and meta-analysis is to clarify the economic impact of motorcycle helmet use. Our primary source was Medline. Search terms included "motorcycle," "motorbike," "motorcycle helmet," "head protective devices," and "cost and cost analysis." The review only included articles that were primary studies, written in English, evaluations of periods after 1994, and published in a peer-reviewed journal. Two independent authors extracted data using predefined data fields. Meta-analysis was done using the R-metafor package. Twelve papers met the criteria for inclusion. Meta-analysis demonstrated that nonhelmeted patients required $12,239 more in hospital costs per patient. Nonhelmeted patients also required more postdischarge care and were more likely to use publicly funded insurance. Studies also found lower injury severity and better hospital course in the helmeted population. Study limitations included selection bias, unclear statistical assumptions, lack of precision measures, confounding variables, and lack of standardization to a common year. Meta-analysis demonstrated an I2 of 67%, attributing a significant proportion of outcome variation to study differences. Motorcycle helmet use reduces morbidity and contributes to significant health care cost savings. Continuing antihelmet legislation will impose a substantial economic burden to the health care system, the government, and the public.

  12. Comparison of time series of integrated water vapor measured using radiosonde, GPS and microwave radiometer at the CNR-IMAA Atmospheric Observatory

    Science.gov (United States)

    Amato, Franceso; Rosoldi, Marco; Madonna, Fabio

    2015-04-01

    Information about the amount and spatial distribution of atmospheric water vapor is essential to improve our knowledge of weather forecasting and climate change. Water vapor is highly variable in space and time depending on the complex interplay of several phenomena like convection, precipitation, turbulence, etc. It remains one of the most poorly characterized meteorological parameters. Remarkable progress in using of Global Navigation Satellite Systems (GNSS), in particular GPS, for the monitoring of atmospheric water vapor has been achieved during the last decades. Various studies have demonstrated that GPS could provide accurate water vapor estimates for the study of the atmosphere. Different GPS data processing provided within the scientific community made use of various tropospheric models that primarily differs for the assumptions on the vertical refractivity profiles and the mapping of the vertical delay with elevation angles. This works compares several models based on the use of surface meteorological data. In order to calculate the Integrated Water Vapour (IWV), an algorithm for calculating the zenith tropospheric delay was implemented. It is based upon different mapping functions (Niell, Saastamoinen, Chao and Herring Mapping Functions). Observations are performed at the Istituto di Metodologie per l'Analisi Ambientale (IMAA) GPS station located in Tito Scalo, Potenza (40.60N, 15.72E), from July to December 2014, in the framework of OSCAR project (Observation System for Climate Application at Regional scale). The retrieved values of the IWV using the GPS are systematically compared with the other estimation of IWV collected at CIAO (CNR-IMAA Atmospheric Observatory) using the other available measurement techniques. In particular, in this work the compared IWV are retrieved from: 1. a Trimble GPS antenna (data processed by the GPS-Met network, see gpsmet.nooa.gov); 2. a Novatel GPS antenna (data locally processed using a software developed at CIAO); 3

  13. Case Series

    African Journals Online (AJOL)

    calciphylaxis is prevention through rigorous control of phosphate and calcium balance. We here present two ... The authors declared no conflict of interest. Introduction. Calciphylaxis is a rare but serious disorder .... were reported to resolve the calciphylaxis lesions in a chronic renal failure patient [20]. In a series of five.

  14. Fourier Series

    Indian Academy of Sciences (India)

    polynomials are dense in the class of continuous functions! The body of literature dealing with Fourier series has reached epic proportions over the last two centuries. We have only given the readers an outline of the topic in this article. For the full length episode we refer the reader to the monumental treatise of. A Zygmund.

  15. Case series

    African Journals Online (AJOL)

    abp

    13 oct. 2017 ... This is an Open Access article distributed under the terms of the Creative Commons Attribution ... Bifocal leg fractures pose many challenges for the surgeon due to .... Dans notre serie, le taux d'infection est reste dans un.

  16. Fourier Series

    Indian Academy of Sciences (India)

    The theory of Fourier series deals with periodic functions. By a periodic ..... including Dirichlet, Riemann and Cantor occupied themselves with the problem of ... to converge only on a set which is negligible in a certain sense (Le. of measure ...

  17. case series

    African Journals Online (AJOL)

    Administrator

    Key words: Case report, case series, concept analysis, research design. African Health Sciences 2012; (4): 557 - 562 http://dx.doi.org/10.4314/ahs.v12i4.25. PO Box 17666 .... According to the latest version of the Dictionary of. Epidemiology ...

  18. On interpolation series related to the Abel-Goncharov problem, with applications to arithmetic-geometric mean relationship and Hellinger integrals

    NARCIS (Netherlands)

    K.O. Dzhaparidze (Kacha)

    1998-01-01

    textabstractIn this paper a convergence class is characterized for special series associated with Gelfond's interpolation problem (a generalization of the Abel-Goncharov problem) when the interpolation nodes are equidistantly distributed within the interval $[0,1]$. As a result, an expansion is

  19. A Power Series Expansion and Its Applications

    Science.gov (United States)

    Chen, Hongwei

    2006-01-01

    Using the power series solution of a differential equation and the computation of a parametric integral, two elementary proofs are given for the power series expansion of (arcsin x)[squared], as well as some applications of this expansion.

  20. From Dalek half balls to Daft Punk helmets: Mimetic fandom and the crafting of replicas

    Directory of Open Access Journals (Sweden)

    Matt Hills

    2014-06-01

    Full Text Available Mimetic fandom is a surprisingly understudied mode of (culturally masculinized fan activity in which fans research and craft replica props. Mimetic fandom can be considered as (inauthentic and (immaterial, combining noncommercial status with grassroots marketing or brand reinforcement as well as fusing an emphasis on material artifacts with Web 2.0 collective intelligence. Simply analyzing mimetic fandom as part of fannish material culture fails to adequately assess the nonmaterial aspects of this collaborative creativity. Two fan cultures are taken as case studies: Dalek building groups and Daft Punk helmet constructors. These diverse cases indicate that mimetic fandom has a presence and significance that moves across media fandoms and is not restricted to the science fiction, fantasy, and horror followings with which it is most often associated. Mimetic fandom may be theorized as an oscillatory activity that confuses binaries and constructions of (academic/fan authenticity. This fan practice desires and pursues a kind of ontological bridging or unity—from text to reality—that is either absent or less dominant in many other fan activities such as cosplay, screen-used prop collecting, and geographical pilgrimage. Fan studies may benefit from reassessing the place of mimesis, especially in order to theorize fan practices that are less clearly transformative in character.

  1. Thermal performance curves under daily thermal fluctuation: A study in helmeted water toad tadpoles.

    Science.gov (United States)

    Bartheld, José L; Artacho, Paulina; Bacigalupe, Leonardo

    2017-12-01

    Most research in physiological ecology has focused on the effects of mean changes in temperature under the classic "hot vs cold" acclimation treatment; however, current evidence suggests that an increment in both the mean and variance of temperature could act synergistically to amplify the negative effects of global temperature increase and how it would affect fitness and performance-related traits in ectothermic organisms. We assessed the effects of acclimation to daily variance of temperature on thermal performance curves of swimming speed in helmeted water toad tadpoles (Calyptocephalella gayi). Acclimation treatments were 20°C ± 0.1 SD (constant) and 20°C ± 1.5 SD (fluctuating). We draw two key findings: first, tadpoles exposed to daily temperature fluctuation had reduced maximal performance (Z max ), and flattened thermal performance curves, thus supporting the "vertical shift or faster-slower" hypothesis, and suggesting that overall swimming performance would be lower through an examination of temperatures under more realistic and ecologically-relevant fluctuating regimens; second, there was significant interindividual variation in performance traits by means of significant repeatability estimates. Our present results suggest that the widespread use of constant acclimation temperatures in laboratory experiments to estimate thermal performance curves (TPCs) may lead to an overestimation of actual organismal performance. We encourage the use of temperature fluctuation acclimation treatments to better understand the variability of physiological traits, which predict ecological and evolutionary responses to global change. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Prenatal forehead edema in 4p- deletion: the 'Greek warrior helmet' profile revisited.

    Science.gov (United States)

    Levaillant, J M; Touboul, C; Sinico, M; Vergnaud, A; Serero, S; Druart, L; Blondeau, J R; Abd Alsamad, I; Haddad, B; Gérard-Blanluet, M

    2005-12-01

    Deletion of short arm of chromosome 4 is difficult to ascertain prenatally, and can be missed. A prenatal suspicion of 4p- syndrome was thoroughly investigated by using two-dimensional and three-dimensional sonography, with a description of the fetal face dysmorphological pattern. The cytogenetic confirmation, obtained by karyotype and FISH technique, allowed a precise description of the prenatal abnormalities. Post-termination tridimensional helicoidal scanner of the fetal face was performed. The main anomaly discovered using two-dimensional sonography was the presence of a strikingly thick prefrontal edema (8 mm, twice the normal values, at 22 weeks: 3.81 +/- 0.62 mm). Three-dimensional sonography showed the classical postnatal profile, with the phenotypic aspect of a 'Greek warrior helmet'. Nasal bones were normal in size and placement, confirmed by helicoidal scanner. Prenatal diagnosis of 4p deletion syndrome can be difficult, and it is the presence of prefrontal edema, associated with more subtle facial anomalies (short philtrum, microretrognathia) which should trigger cytogenetic investigation for 4p- deletion, even with only borderline growth retardation. Copyright 2005 John Wiley & Sons, Ltd

  3. CPAP by helmet for treatment of acute respiratory failure after pediatric liver transplantation.

    Science.gov (United States)

    Chiusolo, F; Fanelli, V; Ciofi Degli Atti, M L; Conti, G; Tortora, F; Pariante, R; Ravà, L; Grimaldi, C; de Ville de Goyet, J; Picardo, S

    2018-02-01

    ARF after pediatric liver transplantation accounts for high rate of morbidity and mortality associated with this procedure. The role of CPAP in postoperative period is still unknown. The aim of the study was to describe current practice and risk factors associated with the application of helmet CPAP. In this retrospective observational cohort study, 119 recipients were divided into two groups based on indication to CPAP after extubation. Perioperative variables were studied, and determinants of CPAP application were analyzed in a multivariate logistic model. Sixty patients (60/114) developed ARF and were included in the CPAP group. No differences were found between the two groups for primary disease, graft type, and blood product transfused. At multivariate analysis, weight 148 mL/kg (OR = 4.0; 95% CI = 1.6-10.1; P = .004) were the main determinants of CPAP application. In the CPAP group, five patients (8.4%) needed reintubation. Pediatric liver recipients with lower weight, higher need of inotropes/vasopressors, higher positive fluid balance after surgery, and lower PaO 2 /FiO 2 before extubation were at higher odds of developing ARF needing CPAP application. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Impact of Helmet Use on Injury and Financial Burden of Motorcycle and Moped Crashes in Hawai‘i: Analysis of a Linked Statewide Database

    Science.gov (United States)

    Castel, Nikki A; Wong, Linda L; Steinemann, Susan

    2016-01-01

    Helmet use reduces injury severity, disability, hospital length of stay, and hospital charges in motorcycle riders. The public absorbs billions of dollars annually in hospital charges for unhelmeted, uninsured motorcycle riders. We sought to quantify, on a statewide level, the healthcare burden of unhelmeted motorcycle and moped riders. We examined 1,965 emergency medical service (EMS) reports from motorcycle and moped crashes in Hawai‘i between 2007–2009. EMS records were linked to hospital medical records to assess associations between vehicle type, helmet use, medical charges, diagnoses, and final disposition. Unhelmeted riders of either type of vehicle suffered more head injuries, especially skull fractures (adjusted odds ratio (OR) of 4.48, P motorcycle and moped riders, with a significant (P = .006) difference between helmeted ($27,176) and unhelmeted ($40,217) motorcycle riders. Unhelmeted riders were twice as likely to self-pay (19.3%, versus 9.8% of helmeted riders), and more likely to have Medicaid or a similar income-qualifying insurance plan (13.5% versus 5.0%, respectively). Protective associations with helmet use are stronger among motorcyclists than moped riders, suggesting the protective effect is augmented in higher speed crashes. The public financial burden is higher from unhelmeted riders who sustain more severe injuries and are less likely to be insured. PMID:27980882

  5. Exposures series

    OpenAIRE

    Stimson, Blake

    2011-01-01

    Reaktion Books’ Exposures series, edited by Peter Hamilton and Mark Haworth-Booth, is comprised of 13 volumes and counting, each less than 200 pages with 80 high-quality illustrations in color and black and white. Currently available titles include Photography and Australia, Photography and Spirit, Photography and Cinema, Photography and Literature, Photography and Flight, Photography and Egypt, Photography and Science, Photography and Africa, Photography and Italy, Photography and the USA, P...

  6. Integrated stratigraphy of an organic matter enriched pelagic series (''black shales''). The Aptian-Albian of the Marches - Umbria basin (central Italy); Stratigraphie integree d'une serie pelagique a horizons enrichis en matiere organique (''black shales''). L'Aptien-Albien du bassin de Marches - Ombrie (Italie centrale)

    Energy Technology Data Exchange (ETDEWEB)

    Fiet, N

    1998-10-23

    The Aptian-Albian series of the Marches-Umbria basin is considered as a field analogue of most basin deposits of the same age located in the Atlantic domain. It corresponds to a pelagic sedimentation with alternations of marls, black shales, and limestones. The study of the black shales series has been carried out using a combination of petrological, geochemical and palynological data. The integration of these data allows to propose a detailed typology of these beds, to define a deposition mode with respect to the organic matter content and to precise the location of sources and transfer ways. A close relationship between the deposition of the black shales and the development of delta zones in the North-Gondwana margin is shown. A comparison with sub-actual analogues allows to explain their rhythmical organization within the sedimentation. A cyclo-stratigraphical approach of the overall series has been performed using the analysis of the sedimentary rhythms. A detailed time calibration (< 100 ka) of the Aptian and Albian epochs is proposed according to the planktonic foraminifera, the calcareous nano-fossils and the dyno-cysts populations. The M-0 magnetic chron has ben dated to 116.7 {+-} 0.7 Ma. The combination of all stratigraphical approaches has permitted to elaborate a subdivision of the series into deposition sequences. The forcing phenomena that led to the genesis of these sedimentary bodies are probably of astronomical-climatical origin. Then a relative sea-level curve has been constructed and compared with the existing reference curves published for the worldwide ocean and the Russian platform. The strong similarities between these curves and the amplitude of the relative variations (up to 80 m) suggest a control of the sedimentation of glacial-eustatic origin. Thus, several glaciation phases are proposed according to the low sea level deposits identified in the series (upper Gargasian, Clansayesian, upper Albian, middle Vraconian). (J.S.)

  7. Integrated stratigraphy of an organic matter enriched pelagic series (''black shales''). The Aptian-Albian of the Marches - Umbria basin (central Italy); Stratigraphie integree d'une serie pelagique a horizons enrichis en matiere organique (''black shales''). L'Aptien-Albien du bassin de Marches - Ombrie (Italie centrale)

    Energy Technology Data Exchange (ETDEWEB)

    Fiet, N.

    1998-10-23

    The Aptian-Albian series of the Marches-Umbria basin is considered as a field analogue of most basin deposits of the same age located in the Atlantic domain. It corresponds to a pelagic sedimentation with alternations of marls, black shales, and limestones. The study of the black shales series has been carried out using a combination of petrological, geochemical and palynological data. The integration of these data allows to propose a detailed typology of these beds, to define a deposition mode with respect to the organic matter content and to precise the location of sources and transfer ways. A close relationship between the deposition of the black shales and the development of delta zones in the North-Gondwana margin is shown. A comparison with sub-actual analogues allows to explain their rhythmical organization within the sedimentation. A cyclo-stratigraphical approach of the overall series has been performed using the analysis of the sedimentary rhythms. A detailed time calibration (< 100 ka) of the Aptian and Albian epochs is proposed according to the planktonic foraminifera, the calcareous nano-fossils and the dyno-cysts populations. The M-0 magnetic chron has ben dated to 116.7 {+-} 0.7 Ma. The combination of all stratigraphical approaches has permitted to elaborate a subdivision of the series into deposition sequences. The forcing phenomena that led to the genesis of these sedimentary bodies are probably of astronomical-climatical origin. Then a relative sea-level curve has been constructed and compared with the existing reference curves published for the worldwide ocean and the Russian platform. The strong similarities between these curves and the amplitude of the relative variations (up to 80 m) suggest a control of the sedimentation of glacial-eustatic origin. Thus, several glaciation phases are proposed according to the low sea level deposits identified in the series (upper Gargasian, Clansayesian, upper Albian, middle Vraconian). (J.S.)

  8. Spectrum of acute clinical characteristics of diagnosed concussions in college athletes wearing instrumented helmets: clinical article.

    Science.gov (United States)

    Duhaime, Ann-Christine; Beckwith, Jonathan G; Maerlender, Arthur C; McAllister, Thomas W; Crisco, Joseph J; Duma, Stefan M; Brolinson, P Gunnar; Rowson, Steven; Flashman, Laura A; Chu, Jeffrey J; Greenwald, Richard M

    2012-12-01

    Concussive head injuries have received much attention in the medical and public arenas, as concerns have been raised about the potential short- and long-term consequences of injuries sustained in sports and other activities. While many student athletes have required evaluation after concussion, the exact definition of concussion has varied among disciplines and over time. The authors used data gathered as part of a multiinstitutional longitudinal study of the biomechanics of head impacts in helmeted collegiate athletes to characterize what signs, symptoms, and clinical histories were used to designate players as having sustained concussions. Players on 3 college football teams and 4 ice hockey teams (male and female) wore helmets instrumented with Head Impact Telemetry (HIT) technology during practices and games over 2-4 seasons of play. Preseason clinical screening batteries assessed baseline cognition and reported symptoms. If a concussion was diagnosed by the team medical staff, basic descriptive information was collected at presentation, and concussed players were reevaluated serially. The specific symptoms or findings associated with the diagnosis of acute concussion, relation to specific impact events, timing of symptom onset and diagnosis, and recorded biomechanical parameters were analyzed. Data were collected from 450 athletes with 486,594 recorded head impacts. Forty-eight separate concussions were diagnosed in 44 individual players. Mental clouding, headache, and dizziness were the most common presenting symptoms. Thirty-one diagnosed cases were associated with an identified impact event; in 17 cases no specific impact event was identified. Onset of symptoms was immediate in 24 players, delayed in 11, and unspecified in 13. In 8 cases the diagnosis was made immediately after a head impact, but in most cases the diagnosis was delayed (median 17 hours). One diagnosed concussion involved a 30-second loss of consciousness; all other players retained

  9. Novel Method of Weighting Cumulative Helmet Impacts Improves Correlation with Brain White Matter Changes After One Football Season of Sub-concussive Head Blows.

    Science.gov (United States)

    Merchant-Borna, Kian; Asselin, Patrick; Narayan, Darren; Abar, Beau; Jones, Courtney M C; Bazarian, Jeffrey J

    2016-12-01

    One football season of sub-concussive head blows has been shown to be associated with subclinical white matter (WM) changes on diffusion tensor imaging (DTI). Prior research analyses of helmet-based impact metrics using mean and peak linear and rotational acceleration showed relatively weak correlations to these WM changes; however, these analyses failed to account for the emerging concept that neuronal vulnerability to successive hits is inversely related to the time between hits (TBH). To develop a novel method for quantifying the cumulative effects of sub-concussive head blows during a single season of collegiate football by weighting helmet-based impact measures for time between helmet impacts. We further aim to compare correlations to changes in DTI after one season of collegiate football using weighted cumulative helmet-based impact measures to correlations using non-weighted cumulative helmet-based impact measures and non-cumulative measures. We performed a secondary analysis of DTI and helmet impact data collected on ten Division III collegiate football players during the 2011 season. All subjects underwent diffusion MR imaging before the start of the football season and within 1 week of the end of the football season. Helmet impacts were recorded at each practice and game using helmet-mounted accelerometers, which computed five helmet-based impact measures for each hit: linear acceleration (LA), rotational acceleration (RA), Gadd Severity Index (GSI), Head Injury Criterion (HIC 15 ), and Head Impact Technology severity profile (HITsp). All helmet-based impact measures were analyzed using five methods of summary: peak and mean (non-cumulative measures), season sum-totals (cumulative unweighted measures), and season sum-totals weighted for time between hits (TBH), the interval of time from hit to post-season DTI assessment (TUA), and both TBH and TUA combined. Summarized helmet-based impact measures were correlated to statistically significant changes in

  10. The General Philosophy Behind the New Integrated and Co-ordinated Science Courses in N.S.W. and the Science Foundation for Physics Textbook Series.

    Science.gov (United States)

    Messel, H.; Barker, E. N.

    Described are the science syllabuses and texts for the science courses written to fulfill the aims of the new system of education in the state of New South Wales, Australia. The science course was developed in two stages: (1) A four year integrated science syllabus for grades 7-10, and (2) separate courses in physics, chemistry, and biology with…

  11. Comparison of helmet-mounted display designs in support of wayfinding

    Science.gov (United States)

    Kumagai, Jason K.; Massel, Lisa; Tack, David; Bossi, Linda

    2003-09-01

    The Canadian Soldier Information Requirements Technology Demonstration (SIREQ TD) soldier modernization research and development program has conducted experiments to help determine the types and amount of information needed to support wayfinding across a range of terrain environments, the most effective display modality for providing the information (visual, auditory or tactile) that will minimize conflict with other infantry tasks, and to optimize interface design. In this study, seven different visual helmet-mounted display (HMD) designs were developed based on soldier feedback from previous studies. The displays and an in-service compass condition were contrasted to investigate how the visual HMD interfaces influenced navigation performance. Displays varied with respect to their information content, frame of reference, point of view, and display features. Twelve male infantry soldiers used all eight experimental conditions to locate bearings to waypoints. From a constant location, participants were required to face waypoints presented at offset bearings of 25, 65, and 120 degrees. Performance measures included time to identify waypoints, accuracy, and head misdirection errors. Subjective measures of performance included ratings of ease of use, acceptance for land navigation, and mental demand. Comments were collected to identify likes, dislikes and possible improvements required for HMDs. Results underlined the potential performance enhancement of GPS-based navigation with HMDs, the requirement for explicit directional information, the desirability of both analog and digital information, the performance benefits of an egocentric frame of reference, the merit of a forward field of view, and the desirability of a guide to help landmark. Implications for the information requirements and human factors design of HMDs for land-based navigational tasks are discussed.

  12. Gauge Integral

    Directory of Open Access Journals (Sweden)

    Coghetto Roland

    2017-10-01

    Full Text Available Some authors have formalized the integral in the Mizar Mathematical Library (MML. The first article in a series on the Darboux/Riemann integral was written by Noboru Endou and Artur Korniłowicz: [6]. The Lebesgue integral was formalized a little later [13] and recently the integral of Riemann-Stieltjes was introduced in the MML by Keiko Narita, Kazuhisa Nakasho and Yasunari Shidama [12].

  13. Case Series.

    Science.gov (United States)

    Vetrayan, Jayachandran; Othman, Suhana; Victor Paulraj, Smily Jesu Priya

    2017-01-01

    To assess the effectiveness and feasibility of behavioral sleep intervention for medicated children with ADHD. Six medicated children (five boys, one girl; aged 6-12 years) with ADHD participated in a 4-week sleep intervention program. The main behavioral strategies used were Faded Bedtime With Response Cost (FBRC) and positive reinforcement. Within a case-series design, objective measure (Sleep Disturbance Scale for Children [SDSC]) and subjective measure (sleep diaries) were used to record changes in children's sleep. For all six children, significant decrease was found in the severity of children's sleep problems (based on SDSC data). Bedtime resistance and mean sleep onset latency were reduced following the 4-week intervention program according to sleep diaries data. Gains were generally maintained at the follow-up. Parents perceived the intervention as being helpful. Based on the initial data, this intervention shows promise as an effective and feasible treatment.

  14. Integrated HIV-Care Into Primary Health Care Clinics and the Influence on Diabetes and Hypertension Care: An Interrupted Time Series Analysis in Free State, South Africa Over 4 Years.

    Science.gov (United States)

    Rawat, Angeli; Uebel, Kerry; Moore, David; Yassi, Annalee

    2018-04-15

    Noncommunicable diseases (NCDs), specifically diabetes and hypertension, are rising in high HIV-burdened countries such as South Africa. How integrated HIV care into primary health care (PHC) influences NCD care is unknown. We aimed to understand whether differences existed in NCD care (pre- versus post-integration) and how changes may relate to HIV patient numbers. Public sector PHC clinics in Free State, South Africa. Using a quasiexperimental design, we analyzed monthly administrative data on 4 indicators for diabetes and hypertension (clinic and population levels) during 4 years as HIV integration was implemented in PHC. Data represented 131 PHC clinics with a catchment population of 1.5 million. We used interrupted time series analysis at ±18 and ±30 months from HIV integration in each clinic to identify changes in trends postintegration compared with those in preintegration. We used linear mixed-effect models to study relationships between HIV and NCD indicators. Patients receiving antiretroviral therapy in the 131 PHC clinics studied increased from 1614 (April 2009) to 57, 958 (April 2013). Trends in new diabetes patients on treatment remained unchanged. However, population-level new hypertensives on treatment decreased at ±30 months from integration by 6/100, 000 (SE = 3, P < 0.02) and was associated with the number of new patients with HIV on treatment at the clinics. Our findings suggest that during the implementation of integrated HIV care into PHC clinics, care for hypertensive patients could be compromised. Further research is needed to understand determinants of NCD care in South Africa and other high HIV-burdened settings to ensure patient-centered PHC.

  15. `Indoor` series vending machines; `Indoor` series jido hanbaiki

    Energy Technology Data Exchange (ETDEWEB)

    Gensui, T.; Kida, A. [Fuji Electric Co. Ltd., Tokyo (Japan); Okumura, H. [Fuji Denki Reiki Co. Ltd., Tokyo (Japan)

    1996-07-10

    This paper introduces three series of vending machines that were designed to match the interior of an office building. The three series are vending machines for cups, paper packs, cans, and tobacco. Among the three series, `Interior` series has a symmetric design that was coated in a grain pattern. The inside of the `Interior` series is coated by laser satin to ensure a sense of superior quality and a refined style. The push-button used for product selection is hot-stamped on the plastic surface to ensure the hair-line luster. `Interior Phase II` series has a bay window design with a sense of superior quality and lightness. The inside of the `Interior Phase II` series is coated by laser satin. `Interior 21` series is integrated with the wall except the sales operation panel. The upper and lower dress panels can be detached and attached. The door lock is a wire-type structure with high operativity. The operation block is coated by titanium color. The dimensions of three series are standardized. 6 figs., 1 tab.

  16. DCP Series

    Directory of Open Access Journals (Sweden)

    Philip Stearns

    2011-06-01

    Full Text Available Photo essay. A collection of Images produced by intentionally corrupting the circuitry of a Kodak DC280 2 MP digitalcamera. By rewiring the electronics of a digital camera, glitched images are produced in a manner that parallels chemically processing unexposed film or photographic paper to produce photographic images without exposure to light. The DCP Series of Digital Images are direct visualizations of data generated by a digital camera as it takes a picture. Electronic processes associated with the normal operations of the camera, which are usually taken for granted, are revealed through an act of intervention. The camera is turned inside­out through complexes of short­circuits, selected by the artist, transforming the camera from a picture taking device to a data capturing device that renders raw data (electronic signals as images. In essence, these images are snap­shots of electronic signals dancing through the camera's circuits, manually rerouted, written directly to the on­board memory device. Rather than seeing images of the world through a lens, we catch a glimpse of what the camera sees when it is forced to peer inside its own mind.

  17. Gene-based SSR markers for common bean (Phaseolus vulgaris L.) derived from root and leaf tissue ESTs: an integration of the BMc series.

    Science.gov (United States)

    Blair, Matthew W; Hurtado, Natalia; Chavarro, Carolina M; Muñoz-Torres, Monica C; Giraldo, Martha C; Pedraza, Fabio; Tomkins, Jeff; Wing, Rod

    2011-03-22

    Sequencing of cDNA libraries for the development of expressed sequence tags (ESTs) as well as for the discovery of simple sequence repeats (SSRs) has been a common method of developing microsatellites or SSR-based markers. In this research, our objective was to further sequence and develop common bean microsatellites from leaf and root cDNA libraries derived from the Andean gene pool accession G19833 and the Mesoamerican gene pool accession DOR364, mapping parents of a commonly used reference map. The root libraries were made from high and low phosphorus treated plants. A total of 3,123 EST sequences from leaf and root cDNA libraries were screened and used for direct simple sequence repeat discovery. From these EST sequences we found 184 microsatellites; the majority containing tri-nucleotide motifs, many of which were GC rich (ACC, AGC and AGG in particular). Di-nucleotide motif microsatellites were about half as common as the tri-nucleotide motif microsatellites but most of these were AGn microsatellites with a moderate number of ATn microsatellites in root ESTs followed by few ACn and no GCn microsatellites. Out of the 184 new SSR loci, 120 new microsatellite markers were developed in the BMc (Bean Microsatellites from cDNAs) series and these were evaluated for their capacity to distinguish bean diversity in a germplasm panel of 18 genotypes. We developed a database with images of the microsatellites and their polymorphism information content (PIC), which averaged 0.310 for polymorphic markers. The present study produced information about microsatellite frequency in root and leaf tissues of two important genotypes for common bean genomics: namely G19833, the Andean genotype selected for whole genome shotgun sequencing from race Peru, and DOR364 a race Mesoamerica subgroup 2 genotype that is a small-red seeded, released variety in Central America. Both race Peru and Mesoamerica subgroup 2 (small red beans) have been understudied in comparison to race Nueva

  18. Synthesis, structure characterization, in vitro and in silico biological evaluation of a new series of thiazole nucleus integrated with pyrazoline scaffolds

    Science.gov (United States)

    Sadashiva, Rajitha; Naral, Damodara; Kudva, Jyothi; Madan Kumar, S.; Byrappa, K.; Mohammed Shafeeulla, R.; Kumsi, Manjunatha

    2017-10-01

    In the current study, a series of 2,4-disubstituted-1,3-thiazoles linked with pyrazoline scaffolds 3a-o were rationally designed and synthesized. The structures of the title compounds were elucidated by spectroscopic data (UV-Vis, IR, NMR and Mass spectra) and elemental analysis. Single crystal X-Ray diffraction studies revealed that, the compounds 3i and 3k crystallized in monoclinic crystal system with P21/n space group and Z = 4. The molecules 3i and 3k were connected with intermolecular hydrogen bonds N2-H2 … O1, N3sbnd H3 … Cl1 and short contacts (Csbnd H … π and Csbnd Cl … π). Intramolecular hydrogen bonds, N3sbnd H3 … N5 and C5sbnd H5 ….N1 were also existed. The compounds were evaluated for their anticancer activity against A549 and MCF-7 human cancer cell lines and in vitro antimicrobial activity against pathogenic microbial strains. The compounds bearing chloro atom at the para position of phenyl ring A like 3f, 3j and 3k with the IC50: 7.5, 5.0 and 5.0 μM respectively, exhibited better activity than standard drug Cisplatin (IC50: 10.0 μM). In addition, the compounds 3a, 3f, 3j and 3l have exhibited the similar antimicrobial activity as that of standard drug Ciprofloxacin and Fluconazole. Furthermore, to support the biological potency of the compounds, in silico molecular docking studies were carried out against the E. coli MurB (PDB code: pdb:2MBR)

  19. Predicting bicycle helmet stage-of-change among middle school, high school, and college cyclists from demographic, cognitive, and motivational variables.

    Science.gov (United States)

    Weiss, Jeffrey; Okun, Morris; Quay, Nancy

    2004-09-01

    To apply Prochaska's Transtheoretical model of behavior change to bicycle helmet use among middle school, high school, and college students. A battery of questionnaires was administered to cyclists in the seventh and ninth grades and to college students in Phoenix, Arizona (N=797). The battery included: (1) a question to determine respondent's stage of behavior change in Prochaska's Transtheoretical model; (2) items assessing the perceived pros and cons of helmet use; (3) a bicycle safety knowledge test; and (4) demographic information. Forty-three percent of the students were in "Precontemplation," 17% were in either "Contemplation" or "Preparation," 16% were in either "Action" or "Maintenance," and 24% were in the "Relapse" stage of change. Grade, Sex, Knowledge, Pros, and Cons, and the Grade by sex and the Grade by knowledge interactions were significant predictors of helmet use stages. Compared with students in Precontemplation, students in the Contemplation stage were disproportionately younger and had higher Pro scores, lower Con scores, and more knowledge (except in the ninth grade). The Transtheoretical model of behavior change is a viable theoretical framework for designing interventions aimed at increasing bicycle helmet use in children and adolescents.

  20. Neutron and X-ray characterisation of the metallurgical properties of a 7th century BC Corinthian-type bronze helmet

    Science.gov (United States)

    Pantos, E.; Kockelmann, W.; Chapon, L. C.; Lutterotti, L.; Bennet, S. L.; Tobin, M. J.; Mosselmans, J. F. W.; Pradell, T.; Salvado, N.; Butí, S.; Garner, R.; Prag, A. J. N. W.

    2005-09-01

    Neutron and synchrotron X-ray diffraction, X-ray fluorescence and FTIR were used to examine a Corinthian-type bronze helmet which is now on display at The Manchester Museum, UK. This type of helmet was manufactured out of a single piece of bronze, probably on a rod-anvil, and like all body-armour it was made to measure. Neutron diffraction sampling of the bronze volume in different areas was used to study the composition, microstructure and crystallographic texture of the alloy in order to draw conclusions about the manufacturing processes. The neutron data revealed the presence of microstrains and non-random distributions of bronze grains hinting at annealing-hammering working cycles in order to harden and shape the alloy. X-ray fluorescence showed that the main body of the helmet is a copper-tin alloy, while the noseguard contains zinc in high abundance. This key compositional difference confirms that the noseguard is not the original but is a modern substitute fabricated for restoration purposes. SR XRD and FTIR from several spots on the head and noseguard identified several surface corrosion products and showed a variation of the Cu-Sn or Cu-Zn percentage compositions, and of the mineral phases. Small samples of corrosion flakes extracted from the outside and inside of the helmet were used to obtain powder XRD patterns.

  1. Effective Feature Preprocessing for Time Series Forecasting

    DEFF Research Database (Denmark)

    Zhao, Junhua; Dong, Zhaoyang; Xu, Zhao

    2006-01-01

    Time series forecasting is an important area in data mining research. Feature preprocessing techniques have significant influence on forecasting accuracy, therefore are essential in a forecasting model. Although several feature preprocessing techniques have been applied in time series forecasting...... performance in time series forecasting. It is demonstrated in our experiment that, effective feature preprocessing can significantly enhance forecasting accuracy. This research can be a useful guidance for researchers on effectively selecting feature preprocessing techniques and integrating them with time...... series forecasting models....

  2. A case series of an off-the-shelf online health resource with integrated nurse coaching to support self-management in COPD

    Directory of Open Access Journals (Sweden)

    Early F

    2017-10-01

    Full Text Available Frances Early,1 Jane S Young,2 Elizabeth Robinshaw,3 Emma Z Mi,4 Ella Z Mi,4 Jonathan P Fuld1 1Centre for Self Management Support, Cambridge University Hospitals NHS Foundation Trust, Cambridge, UK; 2Faculty of Health, Social Care and Education, School of Nursing and Midwifery, Anglia Ruskin University, Cambridge, UK; 3Gloucestershire Hospitals NHS Foundation Trust, Gloucester, UK; 4School of Clinical Medicine, University of Cambridge, Cambridge, UK Background: COPD has significant psychosocial impact. Self-management support improves quality of life, but programs are not universally available. IT-based self-management interventions can provide home-based support, but have mixed results. We conducted a case series of an off-the-shelf Internet-based health-promotion program, The Preventive Plan (TPP, coupled with nurse-coach support, which aimed to increase patient activation and provide self-management benefits. Materials and methods: A total of 19 COPD patients were recruited, and 14 completed 3-month follow-up in two groups: groups 1 and 2 with more and less advanced COPD, respectively. Change in patient activation was determined with paired t-tests and Wilcoxon signed-rank tests. Benefits and user experience were explored in semistructured interviews, analyzed thematically. Results: Only group 1 improved significantly in activation, from a lower baseline than group 2; group 1 also improved significantly in mastery and anxiety. Both groups felt significantly more informed about COPD and reported physical functioning improvements. Group 1 reported improvements in mood and confidence. Overall, group 2 reported fewer benefits than group 1. Both groups valued nurse-coach support; for group 1, it was more important than TPP in building confidence to self-manage. The design of TPP and lack of motivation to use IT were barriers to use, but disease severity and poor IT skills were not. Discussion: Our findings demonstrate the feasibility of combining

  3. Intensity-modulated radiotherapy using simultaneous-integrated boost for definitive treatment of locally advanced mucosal head and neck cancer: outcomes from a single-institution series

    International Nuclear Information System (INIS)

    Johnston, Meredith; Guo, Linxin; Hanna, Catherine; Back, Michael; Guminski, Alex; Lee, Adrian; Eade, Thomas; Veivers, David; Wignall, Andrew

    2013-01-01

    The study aims to report outcomes for patients treated using intensity-modulated radiotherapy (IMRT) with simultaneous-integrated boost and weekly cisplatin for American Joint Committee on Cancer stage III/IV mucosal head and neck squamous cell carcinomas (HNSCCs). Records for 67 patients treated definitively with IMRT for HNSCC were reviewed. By including only those treated with weekly cisplatin, 45 patients were eligible for analysis. Treatment outcomes, effect of patient, tumour and treatment characteristics on disease recurrence were analysed. All patients completed IMRT to 7000cGy in 35 fractions, with concurrent weekly cisplatin 40mg/m 2 (median 6 cycles). Median follow-up was 28 months for living patients. Two-year loco-regional recurrence-free, metastasis-free and overall survival were 85.4, 81.0 and 87.4%, respectively. Local recurrence occurred in three patients, and distant recurrence in eight patients. Our results show efficacy of IMRT and weekly cisplatin in the treatment of stage III/IV HNSCC at our institution with respect to loco-regional control.

  4. Full-color wide field-of-view holographic helmet-mounted display for pilot/vehicle interface development and human factors studies

    Science.gov (United States)

    Burley, James R., II; LaRussa, Joseph A.

    1990-10-01

    A Helmet-Mounted Display (HMD) which utilizes highly efficient trichromatic holographic elements has been designed to support pilot vechicle interface development and human factors studies at the NASA-Langley Research Center. While the optics are fully color corrected, the miniature CRT's are monochromatic. This design provides an upgrade path to full-color when miniature display technology matures to color. The optical design conforms to the helmet shape and provides a 50 degree field-of-view (FOV) to each eye. Built-in adjustments allow each ocular to be independently moved so that the overall horizontal FOV may be varied from 50 degrees to 100 degrees with a corresponding change in the stereo overlap region. The helmet design and interpupillary adjustment allow for the 5th through 95th percentile male and female wearer. Total head-borne weight is approximately 4.2 pounds. The high-resolution monochromatic CRTs are driven by a set of multisync electronics with a maximum video bandwidth of 88 Mhz and supports bith raster and stroke modes. The electronics are designed to be compatiable with the Silicon Graphics IRIS 4D graphics workstations and the ADAGE 340 stroke graphics computer. A Polhemus magnetic tracking device is used to determine the helmet line-of-sight. The helmet will be used to develop innovative new display concepts for the F- 1 8 High-Alpha Research Vehicle (HARV) which make use of the unique display properties of the HMD. Pictorial displays, which convey the appropriate information intuitively, are envisioned. Human factors studies are also planned to evaluate the utility of stereopsis and determine the FOV requirements for different tasks. Concepts proven in the simulator will be carried to flight test in 1993 with a lighter weight, "hardened" version of this HMD design.

  5. Bridging long proxy data time series and instrumental observation in the Virtual Institute of Integrated Climate and Landscape Evolution Analyses - ICLEA

    Science.gov (United States)

    Schwab, Markus J.; Brauer, Achim; Błaszkiewicz, Mirosław; Raab, Thomas; Wilmking, Martin

    2015-04-01

    Understanding causes and effects of present-day climate change on landscapes and the human habitat faces two main challenges, (i) too short time series of instrumental observation that do not cover the full range of variability since mechanisms of climate change and landscape evolution work on different time scales, which often not susceptible to human perception, and, (ii) distinct regional differences due to the location with respect to oceanic/continental climatic influences, the geological underground, and the history and intensity of anthropogenic land-use. Both challenges are central for the ICLEA research strategy and demand a high degree of interdisciplinary. In particular, the need to link observations and measurements of ongoing changes with information from the past taken from natural archives requires joint work of scientists with very different time perspectives. On the one hand, scientists that work at geological time scales of thousands and more years and, on the other hand, those observing and investigating recent processes at short time scales. The GFZ, Greifswald University and the Brandenburg University of Technology together with their partner the Polish Academy of Sciences strive for focusing their research capacities and expertise in ICLEA. ICLEA offers young researchers an interdisciplinary and structured education and promote their early independence through coaching and mentoring. Postdoctoral rotation positions at the ICLEA partner institutions ensure mobility of young researchers and promote dissemination of information and expertise between disciplines. Training, Research and Analytical workshops between research partners of the ICLEA virtual institute are another important measure to qualify young researchers. The long-term mission of the Virtual Institute is to provide a substantiated data basis for sustained environmental maintenance based on a profound process understanding at all relevant time scales. Aim is to explore processes of

  6. Injuries Associated with Hoverboard Use: A Case Series of Emergency Department Patients

    Directory of Open Access Journals (Sweden)

    Gregory S. Weingart

    2017-09-01

    Full Text Available Introduction: Since hoverboards became available in 2015, 2.5 million have been sold in the US. An increasing number of injuries related to their use have been reported, with limited data on associated injury patterns. We describe a case series of emergency department (ED visits for hoverboard-related injuries. Methods: We performed a retrospective chart review on patients presenting to 10 EDs in southeastern Virginia from December 24, 2015, through June 30, 2016. We used a free-text search feature of the electronic medical record to identify patients documented to have the word “hoverboard” in the record. We reported descriptive statistics for patient demographics, types of injuries, body injury location, documented helmet use, injury severity score (ISS, length of stay in the ED, and ED charges. Results: We identified 83 patients in our study. The average age was 26 years old (18 months to 78 years. Of these patients, 53% were adults; the majority were female (61.4% and African American (56.6%. The primary cause of injury was falls (91%, with an average ISS of 5.4 (0–10. The majority of injuries were contusions (37.3% and fractures (36.1%. Pediatric patients tended to have more fractures than adults (46.2% vs 27.3%. Though 20% of patients had head injuries, only one patient reported using a helmet. The mean and median ED charges were $2,292.00 (SD $1,363.64 and $1,808.00, respectively. Head injuries resulted in a significantly higher cost when compared to other injuries; median cost was $2,846.00. Conclusion: While the overall ISS was low, more pediatric patients suffered fractures compared to adults. Documented helmet use was low, yet 20% of our population had head injuries. Further investigation into proper protective gear and training is warranted.

  7. A Dosimetric Evaluation of Conventional Helmet Field Irradiation Versus Two-Field Intensity-Modulated Radiotherapy Technique

    International Nuclear Information System (INIS)

    Yu, James B.; Shiao, Stephen L.; Knisely, Jonathan

    2007-01-01

    Purpose: To compare dosimetric differences between conventional two-beam helmet field irradiation (external beam radiotherapy, EBRT) of the brain and a two-field intensity-modulated radiotherapy (IMRT) technique. Methods and Materials: Ten patients who received helmet field irradiation at our institution were selected for study. External beam radiotherapy portals were planned per usual practice. Intensity-modulated radiotherapy fields were created using the identical field angles as the EBRT portals. Each brain was fully contoured along with the spinal cord to the bottom of the C2 vertebral body. This volume was then expanded symmetrically by 0.5 cm to construct the planning target volume. An IMRT plan was constructed using uniform optimization constraints. For both techniques, the nominal prescribed dose was 3,000 cGy in 10 fractions of 300 cGy using 6-MV photons. Comparative dose-volume histograms were generated for each patient and analyzed. Results: Intensity-modulated radiotherapy improved dose uniformity over EBRT for whole brain radiotherapy. The mean percentage of brain receiving >105% of dose was reduced from 29.3% with EBRT to 0.03% with IMRT. The mean maximum dose was reduced from 3,378 cGy (113%) for EBRT to 3,162 cGy (105%) with IMRT. The mean percent volume receiving at least 98% of the prescribed dose was 99.5% for the conventional technique and 100% for IMRT. Conclusions: Intensity-modulated radiotherapy reduces dose inhomogeneity, particularly for the midline frontal lobe structures where hot spots occur with conventional two-field EBRT. More study needs to be done addressing the clinical implications of optimizing dose uniformity and its effect on long-term cognitive function in selected long-lived patients

  8. Results of a Round Robin ballistic load sensing headform test series

    NARCIS (Netherlands)

    Philippens, M.A.G.; Anctil, B.; Markwardt, K.C.

    2014-01-01

    The majority of methods to assess the behind armour blunt trauma (BABT) risk for ballistic helmets is based on plastic deformable headforms. An alternative, the Ballistic Load Sensing Headform (BLSH) can record the dynamic contact force between helmet back face and the skull. Helmet BABT methods are

  9. Testing periodically integrated autoregressive models

    NARCIS (Netherlands)

    Ph.H.B.F. Franses (Philip Hans); M.J. McAleer (Michael)

    1997-01-01

    textabstractPeriodically integrated time series require a periodic differencing filter to remove the stochastic trend. A non-periodic integrated time series needs the first-difference filter for similar reasons. When the changing seasonal fluctuations for the non-periodic integrated series can be

  10. Louisiana motorcycle fatalities in the wake of governmentally implemented change: a retrospective analysis of the motorcycle morbidity and mortality before, during, and after the repeal of a statewide helmet mandate.

    Science.gov (United States)

    Strom, Shane F; Ambekar, Sudheer; Madhugiri, Venkatesh S; Nanda, Anil

    2013-06-01

    On August 15, 2004, Louisiana's universal motorcycle helmet mandate was reinstated. Previous studies have shown that mortality and morbidity of motorcycle riders who crashed had increased during the 5 years the mandate was repealed. The objective of this study was to discern whether the reinstatement of the universal helmet mandate has resulted in a subsequent decrease in motorcycle-related mortality and morbidity in the state of Louisiana. A retrospective analysis was performed observing the regularity of helmet use and the associated morbidity and mortality of motorcycle traffic accidents from the time before, during, and after the universal motorcycle helmet mandate was repealed in the state of Louisiana. Fatality statistics were obtained through the National Highway Safety Traffic Association. Injury, helmet use, and collision data were obtained from the Louisiana Highway Safety Commission. Motorcycle registration data were obtained from the Federal Highway Administration. Motorcycle crash-related fatalities increased significantly when the statewide helmet mandate was repealed, and interestingly, after reinstatement, these fatality rates never returned to their previous lows. Motorcycle fatalities have increased out of proportion to the increase in motorbike registrations, even when yearly fatalities are normalized to fatalities per 10,000 registered bikes. An all-time high in fatalities was seen in 2006, a year subsequent to the mandate's reinstatement. Fatalities per collision were elevated significantly after the mandate's repeal but did not return to prerepeal lows after the mandate's reinstatement. Although helmet use after reinstatement has reached all-time highs, fatality rates have remained elevated since the original mandate repeal in 1999. Other achievable changes in state policy and law enforcement should be explored to quell this heightened risk to motorcycle enthusiasts in Louisiana, and states considering changing their own motorcycle helmet

  11. Joint Service Aircrew Mask (JSAM) - Tactical Aircraft (TA) A/P22P-14A Respirator Assembly (V)5: Speech Intelligibility Performance with Double Hearing Protection, HGU-84/P Flight Helmet

    Science.gov (United States)

    2017-04-06

    data does not license the holder or any other person or corporation; or convey any rights or permission to manufacture , use, or sell any patented...airworthiness. The JSAM-TA Respirator Assembly (V)5 (Figure 2) is a chemical, biological, and radiological respirator assembly manufactured by Cam Lock...Classic™ sizing matrix for speech intelligibility Subject ID# Gender HGU- 84/P Helmet Helmet Liner (inches) Earcup Spacers (centered behind

  12. Kapteyn series arising in radiation problems

    International Nuclear Information System (INIS)

    Lerche, I; Tautz, R C

    2008-01-01

    In discussing radiation from multiple point charges or magnetic dipoles, moving in circles or ellipses, a variety of Kapteyn series of the second kind arises. Some of the series have been known in closed form for a hundred years or more, others appear not to be available to analytic persuasion. This paper shows how 12 such generic series can be developed to produce either closed analytic expressions or integrals that are not analytically tractable. In addition, the method presented here may be of benefit when one has other Kapteyn series of the second kind to consider, thereby providing an additional reason to consider such series anew

  13. Night vision imaging systems design, integration, and verification in military fighter aircraft

    Science.gov (United States)

    Sabatini, Roberto; Richardson, Mark A.; Cantiello, Maurizio; Toscano, Mario; Fiorini, Pietro; Jia, Huamin; Zammit-Mangion, David

    2012-04-01

    This paper describes the developmental and testing activities conducted by the Italian Air Force Official Test Centre (RSV) in collaboration with Alenia Aerospace, Litton Precision Products and Cranfiled University, in order to confer the Night Vision Imaging Systems (NVIS) capability to the Italian TORNADO IDS (Interdiction and Strike) and ECR (Electronic Combat and Reconnaissance) aircraft. The activities consisted of various Design, Development, Test and Evaluation (DDT&E) activities, including Night Vision Goggles (NVG) integration, cockpit instruments and external lighting modifications, as well as various ground test sessions and a total of eighteen flight test sorties. RSV and Litton Precision Products were responsible of coordinating and conducting the installation activities of the internal and external lights. Particularly, an iterative process was established, allowing an in-site rapid correction of the major deficiencies encountered during the ground and flight test sessions. Both single-ship (day/night) and formation (night) flights were performed, shared between the Test Crews involved in the activities, allowing for a redundant examination of the various test items by all participants. An innovative test matrix was developed and implemented by RSV for assessing the operational suitability and effectiveness of the various modifications implemented. Also important was definition of test criteria for Pilot and Weapon Systems Officer (WSO) workload assessment during the accomplishment of various operational tasks during NVG missions. Furthermore, the specific technical and operational elements required for evaluating the modified helmets were identified, allowing an exhaustive comparative evaluation of the two proposed solutions (i.e., HGU-55P and HGU-55G modified helmets). The results of the activities were very satisfactory. The initial compatibility problems encountered were progressively mitigated by incorporating modifications both in the front and

  14. Integral equations

    CERN Document Server

    Moiseiwitsch, B L

    2005-01-01

    Two distinct but related approaches hold the solutions to many mathematical problems--the forms of expression known as differential and integral equations. The method employed by the integral equation approach specifically includes the boundary conditions, which confers a valuable advantage. In addition, the integral equation approach leads naturally to the solution of the problem--under suitable conditions--in the form of an infinite series.Geared toward upper-level undergraduate students, this text focuses chiefly upon linear integral equations. It begins with a straightforward account, acco

  15. The Effect of a Monocular Helmet-Mounted Display on Aircrew Health: A Longitudinal Cohort Study of Apache AH Mk 1 Pilots -(Vision and Handedness)

    Science.gov (United States)

    2015-05-19

    the day, night, and in adverse weather through the use of nose-mounted, forward-looking infrared (FLIR) pilotage and targeting sensors that provide a...sensor video and/or symbology to each crewmember via a helmet display unit (HDU). The HDU contains a 1-inch (in.) diameter cathode ray tube (CRT...American Association for Pediatric Ophthalmology and Strabismus, 12(4): 365–369. Sale, D. F., and Lund, G. J. 1993. AH-64 Apache program update

  16. AN ANALYSIS OF SALES INFORMATION SYSTEM AND COMPETITIVE ADVANTAGE (Study Case of UD. Citra Helmet

    Directory of Open Access Journals (Sweden)

    Hendra Alianto

    2012-10-01

    Full Text Available Business development in this era of globalization leads companies to use information system in running business relationship by changing the traditional way of working in non-integrated information systems into integrated information systems. The intended use of the integrated information system will improve the effective and efficient way of working, such as the availability of information in real-time, accurate and informative for decision-making for the benefit of operational activities, as well as decision-making for strategic interests and the company’s business development. Especially with the application of sales information system, it will improve the company’s performance and will affect the competitiveness of companies, which can ultimately increase the maximum profit. However, in reality it is not easy to implement the integrated information system, because it is influenced by the customs, culture and mindset of the user company. It is necessary for running system analysis activity and building an integrated information system by concerning into the needs of users, management, customers and stakeholders. The implementation of integrated information system will increase productivity and achieve the effectiveness and efficiency level of company’s operations, through the analysis of sales information system will affect the competitiveness of companies.Keywords: Sales Information System Analysis

  17. The Effect of Integration of Self-Management Web Platforms on Health Status in Chronic Obstructive Pulmonary Disease Management in Primary Care (e-Vita Study): Interrupted Time Series Design.

    Science.gov (United States)

    Talboom-Kamp, Esther Pwa; Verdijk, Noortje A; Kasteleyn, Marise J; Harmans, Lara M; Talboom, Irvin Jsh; Looijmans-van den Akker, Ingrid; van Geloven, Nan; Numans, Mattijs E; Chavannes, Niels H

    2017-08-16

    Worldwide nearly 3 million people die from chronic obstructive pulmonary disease (COPD) every year. Integrated disease management (IDM) improves quality of life for COPD patients and can reduce hospitalization. Self-management of COPD through eHealth is an effective method to improve IDM and clinical outcomes. The objective of this implementation study was to investigate the effect of 3 chronic obstructive pulmonary disease eHealth programs applied in primary care on health status. The e-Vita COPD study compares different levels of integration of Web-based self-management platforms in IDM in 3 primary care settings. Patient health status is examined using the Clinical COPD Questionnaire (CCQ). The parallel cohort design includes 3 levels of integration in IDM (groups 1, 2, 3) and randomization of 2 levels of personal assistance for patients (group A, high assistance, group B, low assistance). Interrupted time series (ITS) design was used to collect CCQ data at multiple time points before and after intervention, and multilevel linear regression modeling was used to analyze CCQ data. Of the 702 invited patients, 215 (30.6%) registered to a platform. Of these, 82 participated in group 1 (high integration IDM), 36 in group 1A (high assistance), and 46 in group 1B (low assistance); 96 participated in group 2 (medium integration IDM), 44 in group 2A (high assistance) and 52 in group 2B (low assistance); also, 37 participated in group 3 (no integration IDM). In the total group, no significant difference was found in change in CCQ trend (P=.334) before (-0.47% per month) and after the intervention (-0.084% per month). Also, no significant difference was found in CCQ changes before versus after the intervention between the groups with high versus low personal assistance. In all subgroups, there was no significant change in the CCQ trend before and after the intervention (group 1A, P=.237; 1B, P=.991; 2A, P=.120; 2B, P=.166; 3, P=.945). The e-Vita eHealth-supported COPD

  18. Euler Polynomials, Fourier Series and Zeta Numbers

    DEFF Research Database (Denmark)

    Scheufens, Ernst E

    2012-01-01

    Fourier series for Euler polynomials is used to obtain information about values of the Riemann zeta function for integer arguments greater than one. If the argument is even we recover the well-known exact values, if the argument is odd we find integral representations and rapidly convergent series....

  19. Series expansion of the modified Einstein Procedure

    Science.gov (United States)

    Seema Chandrakant Shah-Fairbank

    2009-01-01

    This study examines calculating total sediment discharge based on the Modified Einstein Procedure (MEP). A new procedure based on the Series Expansion of the Modified Einstein Procedure (SEMEP) has been developed. This procedure contains four main modifications to MEP. First, SEMEP solves the Einstein integrals quickly and accurately based on a series expansion. Next,...

  20. Summation of series

    CERN Document Server

    Jolley, LB W

    2004-01-01

    Over 1,100 common series, all grouped for easy reference. Arranged by category, these series include arithmetical and geometrical progressions, powers and products of natural numbers, figurate and polygonal numbers, inverse natural numbers, exponential and logarithmic series, binomials, simple inverse products, factorials, trigonometrical and hyperbolic expansions, and additional series. 1961 edition.

  1. The use of the virtual reality Helmet Samsung gear VR as interaction interface of a radioactive waste repository simulator

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Julio A. dos; Mól, Antônio C. de A.; Santo, André C. Do E., E-mail: julio_andrade11@hotmail.com [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Centro Universitário Carioca (UniCarioca), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    Radioactive waste is all material resulting from human activity that contains elements that emit radiation that can generate risks to health and the environment. In this sense, they are very toxic also for those who perform the storage of radioactive waste in nuclear facilities. On the other hand, the virtual reality (VR) has been destined to the most diverse purposes, like simulations for educational systems, for military purposes as for diverse training. VR can be considered as the junction of three basic principles: immersion, interaction and involvement. Bases on these principles of VR, this work aimed to develop a simulator of a repository of nuclear tailings, for mobile computing, whose interaction interface will be through the Samsung Gear VR helmet. The simulator of the nuclear waste repository was developed in the unity 3D tool and the elements that make up the scenario in the 3D MAX program. In this work we tried to put virtual reality under scrutiny in conjunction with Gear VR, to help in the sensation of immersion, as well as, the possibility of interaction with joysticks. The purpose was to provide greater insight into the operating environment. (author)

  2. Physical and chemical properties of meat from scavenging chickens and helmeted guinea fowls in response to age and sex.

    Science.gov (United States)

    Musundire, M T; Halimani, T E; Chimonyo, M

    2017-08-01

    1. The effects of age and sex on body weight, carcass traits, physical and chemical properties of breast muscle from chickens and helmeted guinea fowls managed under village free-range conditions were assessed in random samples of 48 guinea fowls and 48 chickens obtained from local markets. 2. Guinea fowls had higher body weight, hot carcass weight, cold dressed weight and breast weight than chickens. 3. Guinea fowls had more dry matter, protein and less fat than chickens. Ash content did not differ between guinea fowls and chickens. Protein and fat increased, whereas dry matter and ash decreased with age (P meat was lighter, less red and more yellow than guinea fowl meat. Cooking loss was higher in guinea fowls, male and grower birds than chickens, females and adult birds, respectively. Shear force was affected by age, as mature birds had a higher value than growers. 5. Guinea fowl carcasses contained more meat that was leaner, higher in protein and redder compared with chicken meat. As age increased the meat increased in protein and fat content and shear force, whereas colour became darker, redder and yellower.

  3. The use of the virtual reality Helmet Samsung gear VR as interaction interface of a radioactive waste repository simulator

    International Nuclear Information System (INIS)

    Santos, Julio A. dos; Mól, Antônio C. de A.; Santo, André C. Do E.

    2017-01-01

    Radioactive waste is all material resulting from human activity that contains elements that emit radiation that can generate risks to health and the environment. In this sense, they are very toxic also for those who perform the storage of radioactive waste in nuclear facilities. On the other hand, the virtual reality (VR) has been destined to the most diverse purposes, like simulations for educational systems, for military purposes as for diverse training. VR can be considered as the junction of three basic principles: immersion, interaction and involvement. Bases on these principles of VR, this work aimed to develop a simulator of a repository of nuclear tailings, for mobile computing, whose interaction interface will be through the Samsung Gear VR helmet. The simulator of the nuclear waste repository was developed in the unity 3D tool and the elements that make up the scenario in the 3D MAX program. In this work we tried to put virtual reality under scrutiny in conjunction with Gear VR, to help in the sensation of immersion, as well as, the possibility of interaction with joysticks. The purpose was to provide greater insight into the operating environment. (author)

  4. A MATLAB-based eye tracking control system using non-invasive helmet head restraint in the macaque.

    Science.gov (United States)

    De Luna, Paolo; Mohamed Mustafar, Mohamed Faiz Bin; Rainer, Gregor

    2014-09-30

    Tracking eye position is vital for behavioral and neurophysiological investigations in systems and cognitive neuroscience. Infrared camera systems which are now available can be used for eye tracking without the need to surgically implant magnetic search coils. These systems are generally employed using rigid head fixation in monkeys, which maintains the eye in a constant position and facilitates eye tracking. We investigate the use of non-rigid head fixation using a helmet that constrains only general head orientation and allows some freedom of movement. We present a MATLAB software solution to gather and process eye position data, present visual stimuli, interact with various devices, provide experimenter feedback and store data for offline analysis. Our software solution achieves excellent timing performance due to the use of data streaming, instead of the traditionally employed data storage mode for processing analog eye position data. We present behavioral data from two monkeys, demonstrating that adequate performance levels can be achieved on a simple fixation paradigm and show how performance depends on parameters such as fixation window size. Our findings suggest that non-rigid head restraint can be employed for behavioral training and testing on a variety of gaze-dependent visual paradigms, reducing the need for rigid head restraint systems for some applications. While developed for macaque monkey, our system of course can work equally well for applications in human eye tracking where head constraint is undesirable. Copyright © 2014. Published by Elsevier B.V.

  5. A method for summing nonalternating asymptotic series

    International Nuclear Information System (INIS)

    Kazakov, D.I.

    1980-01-01

    A method for reconstructing a function from its nonalternating asymptotic series is proposed. It can also be applied when only a limited number of coefficients and their high order asymptotic behaviour are known. The method is illustrated by examples of the ordinary simple integral simulating a functional integral in a theory with degenerate minimum and of the double-well unharmonic oscillator

  6. Integration of Chandrasekhar's integral equation

    International Nuclear Information System (INIS)

    Tanaka, Tasuku

    2003-01-01

    We solve Chandrasekhar's integration equation for radiative transfer in the plane-parallel atmosphere by iterative integration. The primary thrust in radiative transfer has been to solve the forward problem, i.e., to evaluate the radiance, given the optical thickness and the scattering phase function. In the area of satellite remote sensing, our problem is the inverse problem: to retrieve the surface reflectance and the optical thickness of the atmosphere from the radiance measured by satellites. In order to retrieve the optical thickness and the surface reflectance from the radiance at the top-of-the atmosphere (TOA), we should express the radiance at TOA 'explicitly' in the optical thickness and the surface reflectance. Chandrasekhar formalized radiative transfer in the plane-parallel atmosphere in a simultaneous integral equation, and he obtained the second approximation. Since then no higher approximation has been reported. In this paper, we obtain the third approximation of the scattering function. We integrate functions derived from the second approximation in the integral interval from 1 to ∞ of the inverse of the cos of zenith angles. We can obtain the indefinite integral rather easily in the form of a series expansion. However, the integrals at the upper limit, ∞, are not yet known to us. We can assess the converged values of those series expansions at ∞ through calculus. For integration, we choose coupling pairs to avoid unnecessary terms in the outcome of integral and discover that the simultaneous integral equation can be deduced to the mere integral equation. Through algebraic calculation, we obtain the third approximation as a polynomial of the third degree in the atmospheric optical thickness

  7. Geometric Series via Probability

    Science.gov (United States)

    Tesman, Barry

    2012-01-01

    Infinite series is a challenging topic in the undergraduate mathematics curriculum for many students. In fact, there is a vast literature in mathematics education research on convergence issues. One of the most important types of infinite series is the geometric series. Their beauty lies in the fact that they can be evaluated explicitly and that…

  8. Combat vehicle crew helmet-mounted display: next generation high-resolution head-mounted display

    Science.gov (United States)

    Nelson, Scott A.

    1994-06-01

    The Combat Vehicle Crew Head-Mounted Display (CVC HMD) program is an ARPA-funded, US Army Natick Research, Development, and Engineering Center monitored effort to develop a high resolution, flat panel HMD for the M1 A2 Abrams main battle tank. CVC HMD is part of the ARPA High Definition Systems (HDS) thrust to develop and integrate small (24 micrometers square pels), high resolution (1280 X 1024 X 6-bit grey scale at 60 frame/sec) active matrix electroluminescent (AMEL) and active matrix liquid crystal displays (AMLCD) for head mounted and projection applications. The Honeywell designed CVC HMD is a next generation head-mounted display system that includes advanced flat panel image sources, advanced digital display driver electronics, high speed (> 1 Gbps) digital interconnect electronics, and light weight, high performance optical and mechanical designs. The resulting dramatic improvements in size, weight, power, and cost have already led to program spin offs for both military and commercial applications.

  9. Cross-sensor comparisons between Landsat 5 TM and IRS-P6 AWiFS and disturbance detection using integrated Landsat and AWiFS time-series images

    Science.gov (United States)

    Chen, Xuexia; Vogelmann, James E.; Chander, Gyanesh; Ji, Lei; Tolk, Brian; Huang, Chengquan; Rollins, Matthew

    2013-01-01

    Routine acquisition of Landsat 5 Thematic Mapper (TM) data was discontinued recently and Landsat 7 Enhanced Thematic Mapper Plus (ETM+) has an ongoing problem with the scan line corrector (SLC), thereby creating spatial gaps when covering images obtained during the process. Since temporal and spatial discontinuities of Landsat data are now imminent, it is therefore important to investigate other potential satellite data that can be used to replace Landsat data. We thus cross-compared two near-simultaneous images obtained from Landsat 5 TM and the Indian Remote Sensing (IRS)-P6 Advanced Wide Field Sensor (AWiFS), both captured on 29 May 2007 over Los Angeles, CA. TM and AWiFS reflectances were compared for the green, red, near-infrared (NIR), and shortwave infrared (SWIR) bands, as well as the normalized difference vegetation index (NDVI) based on manually selected polygons in homogeneous areas. All R2 values of linear regressions were found to be higher than 0.99. The temporally invariant cluster (TIC) method was used to calculate the NDVI correlation between the TM and AWiFS images. The NDVI regression line derived from selected polygons passed through several invariant cluster centres of the TIC density maps and demonstrated that both the scene-dependent polygon regression method and TIC method can generate accurate radiometric normalization. A scene-independent normalization method was also used to normalize the AWiFS data. Image agreement assessment demonstrated that the scene-dependent normalization using homogeneous polygons provided slightly higher accuracy values than those obtained by the scene-independent method. Finally, the non-normalized and relatively normalized ‘Landsat-like’ AWiFS 2007 images were integrated into 1984 to 2010 Landsat time-series stacks (LTSS) for disturbance detection using the Vegetation Change Tracker (VCT) model. Both scene-dependent and scene-independent normalized AWiFS data sets could generate disturbance maps similar to

  10. Posn(R) and Eisenstein series

    CERN Document Server

    Jorgenson, Jay

    2005-01-01

    Posn(R) and Eisenstein Series provides an introduction, requiring minimal prerequisites, to the analysis on symmetric spaces of positive definite real matrices as well as quotients of this space by the unimodular group of integral matrices. The approach is presented in very classical terms and includes material on special functions, notably gamma and Bessel functions, and focuses on certain mathematical aspects of Eisenstein series.

  11. Genealogical series method. Hyperpolar points screen effect

    International Nuclear Information System (INIS)

    Gorbatov, A.M.

    1991-01-01

    The fundamental values of the genealogical series method -the genealogical integrals (sandwiches) have been investigated. The hyperpolar points screen effect has been found. It allows one to calculate the sandwiches for the Fermion systems with large number of particles and to ascertain the validity of the iterated-potential method as well. For the first time the genealogical-series method has been realized numerically for the central spin-independent potential

  12. Series Transmission Line Transformer

    Science.gov (United States)

    Buckles, Robert A.; Booth, Rex; Yen, Boris T.

    2004-06-29

    A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

  13. Series expansions without diagrams

    International Nuclear Information System (INIS)

    Bhanot, G.; Creutz, M.; Horvath, I.; Lacki, J.; Weckel, J.

    1994-01-01

    We discuss the use of recursive enumeration schemes to obtain low- and high-temperature series expansions for discrete statistical systems. Using linear combinations of generalized helical lattices, the method is competitive with diagrammatic approaches and is easily generalizable. We illustrate the approach using Ising and Potts models. We present low-temperature series results in up to five dimensions and high-temperature series in three dimensions. The method is general and can be applied to any discrete model

  14. Expansion of Sobolev functions in series in Laguerre polynomials

    International Nuclear Information System (INIS)

    Selyakov, K.I.

    1985-01-01

    The solution of the integral equation for the Sobolev functions is represented in the form of series in Laguerre polynomials. The coefficients of these series are simultaneously the coefficients of the power series for the Ambartsumyan-Chandrasekhar H functions. Infinite systems of linear algebraic equations with Toeplitz matrices are given for the coefficients of the series. Numerical results and approximate expressions are given for the case of isotropic scattering

  15. Fourier Series Optimization Opportunity

    Science.gov (United States)

    Winkel, Brian

    2008-01-01

    This note discusses the introduction of Fourier series as an immediate application of optimization of a function of more than one variable. Specifically, it is shown how the study of Fourier series can be motivated to enrich a multivariable calculus class. This is done through discovery learning and use of technology wherein students build the…

  16. Visualizing the Geometric Series.

    Science.gov (United States)

    Bennett, Albert B., Jr.

    1989-01-01

    Mathematical proofs often leave students unconvinced or without understanding of what has been proved, because they provide no visual-geometric representation. Presented are geometric models for the finite geometric series when r is a whole number, and the infinite geometric series when r is the reciprocal of a whole number. (MNS)

  17. Upper Gastrointestinal (GI) Series

    Science.gov (United States)

    ... standard barium upper GI series, which uses only barium a double-contrast upper GI series, which uses both air and ... evenly coat your upper GI tract with the barium. If you are having a double-contrast study, you will swallow gas-forming crystals that ...

  18. A Network for Integrated Science and Mathematics Teaching and Learning Conference Plenary Papers. NSF/SSMA Wingspread Conference (Racine, Wisconsin, April 1991). School Science and Mathematics Association Topics for Teachers Series Number 7.

    Science.gov (United States)

    Berlin, Donna F., Ed.

    The integration of mathematics and science is not a new concept. However, during recent years it has been a major focus in education reform. A Wingspread conference promoted discussion regarding the integration of mathematics and science and explored ways to improve science and mathematics education in grades K-12. Papers from the conference…

  19. SERI Wind Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Noun, R. J.

    1983-06-01

    The SERI Wind Energy Program manages the areas or innovative research, wind systems analysis, and environmental compatibility for the U.S. Department of Energy. Since 1978, SERI wind program staff have conducted in-house aerodynamic and engineering analyses of novel concepts for wind energy conversion and have managed over 20 subcontracts to determine technical feasibility; the most promising of these concepts is the passive blade cyclic pitch control project. In the area of systems analysis, the SERI program has analyzed the impact of intermittent generation on the reliability of electric utility systems using standard utility planning models. SERI has also conducted methodology assessments. Environmental issues related to television interference and acoustic noise from large wind turbines have been addressed. SERI has identified the causes, effects, and potential control of acoustic noise emissions from large wind turbines.

  20. Triple products of Eisenstein series

    Science.gov (United States)

    Venkatesh, Anil

    In this thesis, we construct a Massey triple product on the Deligne cohomology of the modular curve with coefficients in symmetric powers of the standard representation of the modular group. This result is obtained by constructing a Massey triple product on the extension groups in the category of admissible variations of mixed Hodge structure over the modular curve, which induces the desired construction on Deligne cohomology. The result extends Brown's construction of the cup product on Deligne cohomology to a higher cohomological product. Massey triple products on Deligne cohomology have been previously investigated by Deninger, who considered Deligne cohomology with trivial real coefficients. By working over the reals, Deninger was able to compute cohomology exclusively with differential forms. In this work, Deligne cohomology is studied over the rationals, which introduces an obstruction to applying Deninger's results. The obstruction arises from the fact that the integration map from the de Rham complex to the Eilenberg-MacLane complex of the modular group is not an algebra homomorphism. We compute the correction terms of the integration map as regularized iterated integrals of Eisenstein series, and show that these integrals arise in the cup product and Massey triple product on Deligne cohomology.

  1. Negative dimensional integrals. Pt. 1

    International Nuclear Information System (INIS)

    Halliday, I.G.; Ricotta, R.M.

    1987-01-01

    We propose a new method of evaluating integrals based on negative dimensional integration. We compute Feynman graphs by considering analytic extensions. Propagators are raised to negative integer powers and integrated over negative integer dimensions. We are left with the problem of computing polynomial integrals and summing finite series. (orig.)

  2. Bernoulli Polynomials, Fourier Series and Zeta Numbers

    DEFF Research Database (Denmark)

    Scheufens, Ernst E

    2013-01-01

    Fourier series for Bernoulli polynomials are used to obtain information about values of the Riemann zeta function for integer arguments greater than one. If the argument is even we recover the well-known exact values, if the argument is odd we find integral representations and rapidly convergent...

  3. Analysing Stable Time Series

    National Research Council Canada - National Science Library

    Adler, Robert

    1997-01-01

    We describe how to take a stable, ARMA, time series through the various stages of model identification, parameter estimation, and diagnostic checking, and accompany the discussion with a goodly number...

  4. Multivariate Time Series Search

    Data.gov (United States)

    National Aeronautics and Space Administration — Multivariate Time-Series (MTS) are ubiquitous, and are generated in areas as disparate as sensor recordings in aerospace systems, music and video streams, medical...

  5. Historical Climatology Series

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Historical Climatology Series (HCS) is a set of climate-related publications published by NOAA's National Climatic Data Center beginning in 1978. HCS is...

  6. Long time series

    DEFF Research Database (Denmark)

    Hisdal, H.; Holmqvist, E.; Hyvärinen, V.

    Awareness that emission of greenhouse gases will raise the global temperature and change the climate has led to studies trying to identify such changes in long-term climate and hydrologic time series. This report, written by the......Awareness that emission of greenhouse gases will raise the global temperature and change the climate has led to studies trying to identify such changes in long-term climate and hydrologic time series. This report, written by the...

  7. Travelling without a helmet

    NARCIS (Netherlands)

    Rindrasih, Erda; Hartmann, Thomas; Witte, Patrick; Spit, Tejo; Zoomers, Annelies

    2018-01-01

    Tourists are particularly vulnerable when natural disasters occur in regions that they are visiting. It is assumed that they lack awareness and understanding of the actions that they need to take in such circumstances. This study examines the responses of tourists in times of disaster, building on

  8. Ballots and Blue Helmets

    DEFF Research Database (Denmark)

    Hansen, Bertel Teilfeldt

    This paper provides an answer to the question of why early post-conflict elections have been so frequent in the post-Cold War era, when they are widely believed to be prone to result in renewed violence. I show that their popularity stems from their utility as an exit strategy for peacekeeping...... contributions to UN missions after 1989. The data reveal that UN troops rapidly accumulate before the first election in a mission and then leave just as rapidly afterwards. This pattern is independent of the income and regime type of contributor countries and of the level of violence in the mission country....

  9. Fusion Helmet: Electronic Analysis

    Science.gov (United States)

    2014-04-01

    Table 1: LYR203-101B Board Feature P1 (SEC MODULE) DM648 GPIO PORn Video Ports (2) Bootmode SPI/UART I2C CLKIN MDIO DDR2 128MB/16bit SPI Flash 16...McASP EMAC-SGMII /2 MDIO I2C GPIO DDR2 128MB/16bit JTAG Memory CLKGEN I2C PGoodPGood PORn Pwr LED Power DSP SPI/UART DSP SPI/UARTSPI/UART Video Display

  10. On Sums of Numerical Series and Fourier Series

    Science.gov (United States)

    Pavao, H. Germano; de Oliveira, E. Capelas

    2008-01-01

    We discuss a class of trigonometric functions whose corresponding Fourier series, on a conveniently chosen interval, can be used to calculate several numerical series. Particular cases are presented and two recent results involving numerical series are recovered. (Contains 1 note.)

  11. Exact Slater integrals

    International Nuclear Information System (INIS)

    Golden, L.B.

    1968-01-01

    In atomic structure calculations, one has to evaluate the Slater integrals. In the present program, the authors evaluate exactly the Slater integral when hydrogenic wave functions are used for the bound-state orbitals. When hydrogenic wave functions are used, the Slater integrals involve integrands which can be written in the form of a product of an exponential, exp(ax) and a known analytic polynomial function, f(x). By repeated partial integration such an integral can be expressed in terms of a finite series involving the exponential, the polynomial function and its derivatives. PL/1-FORMAC has a built-in subroutine that will analytically find the derivatives of any multinomial. Thus, the finite series and hence the Slater integral can be evaluated analytically. (Auth.)

  12. Computation of solar perturbations with Poisson series

    Science.gov (United States)

    Broucke, R.

    1974-01-01

    Description of a project for computing first-order perturbations of natural or artificial satellites by integrating the equations of motion on a computer with automatic Poisson series expansions. A basic feature of the method of solution is that the classical variation-of-parameters formulation is used rather than rectangular coordinates. However, the variation-of-parameters formulation uses the three rectangular components of the disturbing force rather than the classical disturbing function, so that there is no problem in expanding the disturbing function in series. Another characteristic of the variation-of-parameters formulation employed is that six rather unusual variables are used in order to avoid singularities at the zero eccentricity and zero (or 90 deg) inclination. The integration process starts by assuming that all the orbit elements present on the right-hand sides of the equations of motion are constants. These right-hand sides are then simple Poisson series which can be obtained with the use of the Bessel expansions of the two-body problem in conjunction with certain interation methods. These Poisson series can then be integrated term by term, and a first-order solution is obtained.

  13. Visual time series analysis

    DEFF Research Database (Denmark)

    Fischer, Paul; Hilbert, Astrid

    2012-01-01

    We introduce a platform which supplies an easy-to-handle, interactive, extendable, and fast analysis tool for time series analysis. In contrast to other software suits like Maple, Matlab, or R, which use a command-line-like interface and where the user has to memorize/look-up the appropriate...... commands, our application is select-and-click-driven. It allows to derive many different sequences of deviations for a given time series and to visualize them in different ways in order to judge their expressive power and to reuse the procedure found. For many transformations or model-ts, the user may...... choose between manual and automated parameter selection. The user can dene new transformations and add them to the system. The application contains efficient implementations of advanced and recent techniques for time series analysis including techniques related to extreme value analysis and filtering...

  14. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... member of our patient care team. Managing Your Arthritis Managing Your Arthritis Managing Chronic Pain and Depression ...

  15. Rheumatoid Arthritis Educational Video Series

    Science.gov (United States)

    ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

  16. Time Series Momentum

    DEFF Research Database (Denmark)

    Moskowitz, Tobias J.; Ooi, Yao Hua; Heje Pedersen, Lasse

    2012-01-01

    We document significant “time series momentum” in equity index, currency, commodity, and bond futures for each of the 58 liquid instruments we consider. We find persistence in returns for one to 12 months that partially reverses over longer horizons, consistent with sentiment theories of initial...... under-reaction and delayed over-reaction. A diversified portfolio of time series momentum strategies across all asset classes delivers substantial abnormal returns with little exposure to standard asset pricing factors and performs best during extreme markets. Examining the trading activities...

  17. Applied time series analysis

    CERN Document Server

    Woodward, Wayne A; Elliott, Alan C

    2011-01-01

    ""There is scarcely a standard technique that the reader will find left out … this book is highly recommended for those requiring a ready introduction to applicable methods in time series and serves as a useful resource for pedagogical purposes.""-International Statistical Review (2014), 82""Current time series theory for practice is well summarized in this book.""-Emmanuel Parzen, Texas A&M University""What an extraordinary range of topics covered, all very insightfully. I like [the authors'] innovations very much, such as the AR factor table.""-David Findley, U.S. Census Bureau (retired)""…

  18. Predicting chaotic time series

    International Nuclear Information System (INIS)

    Farmer, J.D.; Sidorowich, J.J.

    1987-01-01

    We present a forecasting technique for chaotic data. After embedding a time series in a state space using delay coordinates, we ''learn'' the induced nonlinear mapping using local approximation. This allows us to make short-term predictions of the future behavior of a time series, using information based only on past values. We present an error estimate for this technique, and demonstrate its effectiveness by applying it to several examples, including data from the Mackey-Glass delay differential equation, Rayleigh-Benard convection, and Taylor-Couette flow

  19. Branching trajectory continual integral

    International Nuclear Information System (INIS)

    Maslov, V.P.; Chebotarev, A.M.

    1980-01-01

    Heuristic definition of the Feynman continual integral over branching trajectories is suggested which makes it possible to obtain in the closed form the solution of the Cauchy problem for the model Hartree equation. A number of properties of the solution is derived from an integral representation. In particular, the quasiclassical asymptotics, exact solution in the gaussian case and perturbation theory series are described. The existence theorem for the simpliest continual integral over branching trajectories is proved [ru

  20. Fourier Series Formalization in ACL2(r

    Directory of Open Access Journals (Sweden)

    Cuong K. Chau

    2015-09-01

    Full Text Available We formalize some basic properties of Fourier series in the logic of ACL2(r, which is a variant of ACL2 that supports reasoning about the real and complex numbers by way of non-standard analysis. More specifically, we extend a framework for formally evaluating definite integrals of real-valued, continuous functions using the Second Fundamental Theorem of Calculus. Our extended framework is also applied to functions containing free arguments. Using this framework, we are able to prove the orthogonality relationships between trigonometric functions, which are the essential properties in Fourier series analysis. The sum rule for definite integrals of indexed sums is also formalized by applying the extended framework along with the First Fundamental Theorem of Calculus and the sum rule for differentiation. The Fourier coefficient formulas of periodic functions are then formalized from the orthogonality relations and the sum rule for integration. Consequently, the uniqueness of Fourier sums is a straightforward corollary. We also present our formalization of the sum rule for definite integrals of infinite series in ACL2(r. Part of this task is to prove the Dini Uniform Convergence Theorem and the continuity of a limit function under certain conditions. A key technique in our proofs of these theorems is to apply the overspill principle from non-standard analysis.

  1. Modulated Hermite series expansions and the time-bandwidth product

    NARCIS (Netherlands)

    Brinker, den A.C.; Sarroukh, B.E.

    2000-01-01

    The harmonically modulated Hermite series constitute an orthonormal basis in the Hilbert space of square-integrable functions. This basis comprises three free parameters, namely a translation, a modulation, and a scale factor. In practical situations, we are interested in series expansions that are

  2. Box Integrals

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, David H.; Borwein, Jonathan M.; Crandall, Richard E.

    2006-06-01

    By a "box integral" we mean here an expectation $\\langle|\\vec r - \\vec q|^s \\rangle$ where $\\vec r$runs over the unit $n$-cube,with $\\vec q$ and $s$ fixed, explicitly:\\begin eqnarray*&&\\int_01 \\cdots \\int_01 \\left((r_1 - q_1)2 + \\dots+(r_n-q_n)2\\right)^ s/2 \\ dr_1 \\cdots dr_n.\\end eqnarray* The study ofbox integrals leads one naturally into several disparate fields ofanalysis. While previous studies have focused upon symbolic evaluationand asymptotic analysis of special cases (notably $s = 1$), we workherein more generally--in interdisciplinary fashion--developing resultssuch as: (1) analytic continuation (in complex $s$), (2) relevantcombinatorial identities, (3) rapidly converging series, (4) statisticalinferences, (5) connections to mathematical physics, and (6)extreme-precision quadrature techniques appropriate for these integrals.These intuitions and results open up avenues of experimental mathematics,with a view to new conjectures and theorems on integrals of thistype.

  3. Danish television drama series

    DEFF Research Database (Denmark)

    Degn, Hans-Peter; Krogager, Stinne Gunder Strøm

    2017-01-01

    In recent years, Danish television drama series have become an internationally acclaimed export success. This article analyses the development on the domestic market lying behind this international recognition. A change in production dogmas has formed the characteristics of these successful Danish...... the characteristics of these productions and the development of their audience profiles across age, gender and educational level....

  4. Composition: Unity - Diversity series

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2015-01-01

    Unity-Diversity series are open compositions to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". This work is licensed under a Creative Commons "by-nc" License. You may for non-commercial purposes use and distribute it...

  5. Series, Prof. George William

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1984 Honorary. Series, Prof. George William. Date of birth: 22 February 1920. Date of death: 2 January 1995. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  6. On the series

    Indian Academy of Sciences (India)

    Home; Journals; Proceedings – Mathematical Sciences; Volume 115; Issue 4. On the Series ∑ k = 1 ∞ ( 3 k k ) − 1 k − n x k. Necdet Batir. Volume 115 Issue 4 November 2005 pp 371- ... Author Affiliations. Necdet Batir1. Department of Mathematics, Faculty of Arts and Sciences, Yüzüncü Yil University, 65080 Van, Turkey ...

  7. Simple Hofmeister series

    NARCIS (Netherlands)

    Lyklema, J.

    2009-01-01

    Hofmeister, or lyotropic, series date back to 1888, when the founder arranged a large number of electrolytes in sequences with respect to their effectiveness salting out egg white. Since then the name has been applied to various phenomena involving ion specificity. In order to isolate effects

  8. Wind Integration Data Sets | Grid Modernization | NREL

    Science.gov (United States)

    Wind Integration Data Sets Wind Integration Data Sets NREL's wind integration data sets provide the Integration Data Sets Ten-minute time-series wind data for 2004, 2005, and 2006 to help energy professionals perform wind integration studies and estimate power production from hypothetical wind power plants. Access

  9. Forecasting daily meteorological time series using ARIMA and regression models

    Science.gov (United States)

    Murat, Małgorzata; Malinowska, Iwona; Gos, Magdalena; Krzyszczak, Jaromir

    2018-04-01

    The daily air temperature and precipitation time series recorded between January 1, 1980 and December 31, 2010 in four European sites (Jokioinen, Dikopshof, Lleida and Lublin) from different climatic zones were modeled and forecasted. In our forecasting we used the methods of the Box-Jenkins and Holt- Winters seasonal auto regressive integrated moving-average, the autoregressive integrated moving-average with external regressors in the form of Fourier terms and the time series regression, including trend and seasonality components methodology with R software. It was demonstrated that obtained models are able to capture the dynamics of the time series data and to produce sensible forecasts.

  10. From Taylor series to Taylor models

    International Nuclear Information System (INIS)

    Berz, Martin

    1997-01-01

    An overview of the background of Taylor series methods and the utilization of the differential algebraic structure is given, and various associated techniques are reviewed. The conventional Taylor methods are extended to allow for a rigorous treatment of bounds for the remainder of the expansion in a similarly universal way. Utilizing differential algebraic and functional analytic arguments on the set of Taylor models, arbitrary order integrators with rigorous remainder treatment are developed. The integrators can meet pre-specified accuracy requirements in a mathematically strict way, and are a stepping stone towards fully rigorous estimates of stability of repetitive systems

  11. From Taylor series to Taylor models

    International Nuclear Information System (INIS)

    Berz, M.

    1997-01-01

    An overview of the background of Taylor series methods and the utilization of the differential algebraic structure is given, and various associated techniques are reviewed. The conventional Taylor methods are extended to allow for a rigorous treatment of bounds for the remainder of the expansion in a similarly universal way. Utilizing differential algebraic and functional analytic arguments on the set of Taylor models, arbitrary order integrators with rigorous remainder treatment are developed. The integrators can meet pre-specified accuracy requirements in a mathematically strict way, and are a stepping stone towards fully rigorous estimates of stability of repetitive systems. copyright 1997 American Institute of Physics

  12. Studying Dynamic Features in Myocardial Infarction Progression by Integrating miRNA-Transcription Factor Co-Regulatory Networks and Time-Series RNA Expression Data from Peripheral Blood Mononuclear Cells.

    Directory of Open Access Journals (Sweden)

    Hongbo Shi

    Full Text Available Myocardial infarction (MI is a serious heart disease and a leading cause of mortality and morbidity worldwide. Although some molecules (genes, miRNAs and transcription factors (TFs associated with MI have been studied in a specific pathological context, their dynamic characteristics in gene expressions, biological functions and regulatory interactions in MI progression have not been fully elucidated to date. In the current study, we analyzed time-series RNA expression data from peripheral blood mononuclear cells. We observed that significantly differentially expressed genes were sharply up- or down-regulated in the acute phase of MI, and then changed slowly until the chronic phase. Biological functions involved at each stage of MI were identified. Additionally, dynamic miRNA-TF co-regulatory networks were constructed based on the significantly differentially expressed genes and miRNA-TF co-regulatory motifs, and the dynamic interplay of miRNAs, TFs and target genes were investigated. Finally, a new panel of candidate diagnostic biomarkers (STAT3 and ICAM1 was identified to have discriminatory capability for patients with or without MI, especially the patients with or without recurrent events. The results of the present study not only shed new light on the understanding underlying regulatory mechanisms involved in MI progression, but also contribute to the discovery of true diagnostic biomarkers for MI.

  13. SU-E-T-366: Estimation of Whole Body Dose From Cranial Irradiation From C and Perfexion Series Gamma Knife Units

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, S [Indiana University Health Methodist Hospital, Indianapolis, IN (United States); Indiana University School of Medicine, Indianapolis, IN, University Hospitals Case Medical Center, Cleaveland, OH (United States); Andersen, A; Lulu, B; Das, I [Indiana University School of Medicine, Indianapolis, IN, University Hospitals Case Medical Center, Cleaveland, OH (United States); Cheng, C

    2015-06-15

    Purpose: The Leksell Gamma Knife (GK) B & C series contains 201 Cobalt-60 sources with a helmet. The new model, Perfexion uses 192 Cobalt-60 sources without a helmet; using IRIS system for collimation and stereotactic guidance to deliver SRS to brain tumors. Relative dose to extracranial organs at risk (OARs) is measured in phantom in this study for Perfexion and C-series GK. Materials & Methods: Measurements were performed in a Rando anthropomorphic phantom on both systems using a large ion chamber (Keithley-175) for each collimator. The Keithley-175 cc ion chamber was sandwiched between phantom slices at various locations in the phantom to correspond to different extracranial OARs (thyroid, heart, kidney, ovary and testis, etc.) The dose measurement was repeated with OSL detectors for each position and collimator. Results: A large variation is observed in the normalized dose between these two systems. The dose beyond the housing falls off exponentially for Perfexion. Dose beyond the C-series GK housing falls off exponentially from 0–20cm then remains relatively constant from 20–40cm and again falls off with distance but less rapidly. The variation of extracranial dose with distance for each collimator is found to be parallel to each other for both systems. Conclusion: Whole body dose is found to vary significantly between these systems. It is important to measure the extracranial dose, especially for young patients. It is estimated that dose falls off exponentially from the GK housing and is about 1% for large collimators at 75 cm. The dose is two-orders of magnitude smaller for the 4mm collimator. However, this small dose for patient may be significant radiologically.

  14. Advanced Grid Control Technologies Workshop Series | Energy Systems

    Science.gov (United States)

    : Smart Grid and Beyond John McDonald, Director, Technical Strategy and Policy Development, General Control Technologies Workshop Series In July 2015, NREL's energy systems integration team hosted workshops the Energy Systems Integration Facility (ESIF) and included a technology showcase featuring projects

  15. Historia de las series

    OpenAIRE

    Cascajosa Virino, Concepción

    2017-01-01

    Reseña: Historia de las series de Toni de la Torre: la gran impostura Durante mucho tiempo los profesores de cine en España se han quejado (amargamente y en privado) de la recurrencia en la bibliografía de los trabajos de sus estudiantes de los libros de un autor conocido por la escasa calidad de sus textos, cuyos vistosos títulos garantizan que acaben en las estanterías de las bibliotecas universitarias. Es muy propio de la cultura española hacer duras aseveraciones en foros irrelevantes y, ...

  16. Infinite sequences and series

    CERN Document Server

    Knopp, Konrad

    1956-01-01

    One of the finest expositors in the field of modern mathematics, Dr. Konrad Knopp here concentrates on a topic that is of particular interest to 20th-century mathematicians and students. He develops the theory of infinite sequences and series from its beginnings to a point where the reader will be in a position to investigate more advanced stages on his own. The foundations of the theory are therefore presented with special care, while the developmental aspects are limited by the scope and purpose of the book. All definitions are clearly stated; all theorems are proved with enough detail to ma

  17. Tattoo reaction: Case series

    Directory of Open Access Journals (Sweden)

    Muneer Mohamed

    2018-04-01

    Full Text Available Tattoo is going to be a very common practice especially among young people and we are witnessing a gradual increase of numerous potential complications to tattoo placement which are often seen by physicians, but generally unknown to the public. The most common skin reactions to tattoo include a transient acute inflammatory reaction due to trauma of the skin with needles and medical complications such as superficial and deep local infections, systemic infections, allergic contact dermatitis, photodermatitis, granulomatous and lichenoid reactions, and skin diseases localized on tattooed area (eczema, psoriasis, lichen, and morphea. In this series we present three cases of tattoo reaction.

  18. Murderers: a personal series.

    Science.gov (United States)

    Parker, N

    1979-01-27

    One hundred people who were accused either of murder (70 persons) or of attempted murder (30 persons) in Queensland were personally examined by the writer. The methods, motives, and ways of prevention of homicide are discussed. A considerable preportion of murderers in this series were either mentally ill or severely emotionally disturbed at the time the crime was committed, and at least one in 10 of these murders could have been prevented. It is recommended that the treatment and assessment of potentially violent psychotic patients should be undertaken more carefully, and that the antipsychiatrist campaigns for the freedom of the individual should be tempered with a consideration for public safety.

  19. Square summable power series

    CERN Document Server

    de Branges, Louis

    2015-01-01

    This text for advanced undergraduate and graduate students introduces Hilbert space and analytic function theory, which is centered around the invariant subspace concept. The book's principal feature is the extensive use of formal power series methods to obtain and sometimes reformulate results of analytic function theory. The presentation is elementary in that it requires little previous knowledge of analysis, but it is designed to lead students to an advanced level of performance. This is achieved chiefly through the use of problems, many of which were proposed by former students. The book's

  20. Introduction to Time Series Modeling

    CERN Document Server

    Kitagawa, Genshiro

    2010-01-01

    In time series modeling, the behavior of a certain phenomenon is expressed in relation to the past values of itself and other covariates. Since many important phenomena in statistical analysis are actually time series and the identification of conditional distribution of the phenomenon is an essential part of the statistical modeling, it is very important and useful to learn fundamental methods of time series modeling. Illustrating how to build models for time series using basic methods, "Introduction to Time Series Modeling" covers numerous time series models and the various tools f

  1. Integral or integrated marketing

    Directory of Open Access Journals (Sweden)

    Davčik Nebojša

    2006-01-01

    Full Text Available Marketing theorists and experts try to develop business efficient organization and to get marketing performance at higher, business integrated level since its earliest beginnings. The core issue in this paperwork is the dialectic and practical approach dilemma should we develop integrated or integral marketing approach in the organization. The presented company cases as well as dialectic and functional explanations of this dilemma clearly shows that integrated marketing is narrower approach than integral marketing if we take as focal point new, unique and completed entity. In the integration the essence is in getting different parts together, which do not have to make necessary the new entity. The key elements in the definition of the integral marketing are necessity and holistic, e.g. necessity to develop new, holistic entity.

  2. Antiderivative Series for Differentiable Functions

    Science.gov (United States)

    Howard, Roy M.

    2004-01-01

    A series defining the antiderivative of an n th order differentiable function is defined. This series provides an explicit expression for the second part of the Fundamental Theorem of Calculus and can facilitate the establishment of new antiderivative functions.

  3. A Pilot Study on the Effects of Transcranial Direct Current Stimulation on Brain Rhythms and Entropy during Self-Paced Finger Movement using the Epoc Helmet

    Directory of Open Access Journals (Sweden)

    Mario U. Manto

    2017-04-01

    Full Text Available Transcranial direct current stimulation (tDCS of the cerebellum is emerging as a novel non-invasive tool to modulate the activity of the cerebellar circuitry. In a single blinded study, we applied anodal tDCS (atDCS of the cerebellum to assess its effects on brain entropy and brain rhythms during self-paced sequential finger movements in a group of healthy volunteers. Although wearable electroencephalogram (EEG systems cannot compete with traditional clinical/laboratory set-ups in terms of accuracy and channel density, they have now reached a sufficient maturity to envision daily life applications. Therefore, the EEG was recorded with a comfortable and easy to wear 14 channels wireless helmet (Epoc headset; electrode location was based on the 10–20 system. Cerebellar neurostimulation modified brain rhythmicity with a decrease in the delta band (electrode F3 and T8, p < 0.05. By contrast, our study did not show any significant change in entropy ratios and laterality coefficients (LC after atDCS of the cerebellum in the 14 channels. The cerebellum is heavily connected with the cerebral cortex including the frontal lobes and parietal lobes via the cerebello-thalamo-cortical pathway. We propose that the effects of anodal stimulation of the cerebellar cortex upon cerebral cortical rhythms are mediated by this key-pathway. Additional studies using high-density EEG recordings and behavioral correlates are now required to confirm our findings, especially given the limited coverage of Epoc headset.

  4. Estimating the cost of referral and willingness to pay for referral to higher-level health facilities: a case series study from an integrated community case management programme in Uganda.

    Science.gov (United States)

    Nanyonjo, Agnes; Bagorogoza, Benson; Kasteng, Frida; Ayebale, Godfrey; Makumbi, Fredrick; Tomson, Göran; Källander, Karin

    2015-08-28

    Integrated community case management (iCCM) relies on community health workers (CHWs) managing children with malaria, pneumonia, diarrhoea, and referring children when management is not possible. This study sought to establish the cost per sick child referred to seek care from a higher-level health facility by a CHW and to estimate caregivers' willingness to pay (WTP) for referral. Caregivers of 203 randomly selected children referred to higher-level health facilities by CHWs were interviewed in four Midwestern Uganda districts. Questionnaires and document reviews were used to capture direct, indirect and opportunity costs incurred by caregivers, CHWs and health facilities managing referred children. WTP for referral was assessed through the 'bidding game' approach followed by an open-ended question on maximum WTP. Descriptive analysis was conducted for factors associated with referral completion and WTP using logistic and linear regression methods, respectively. The cost per case referred to higher-level health facilities was computed from a societal perspective. Reasons for referral included having fever with a negative malaria test (46.8%), danger signs (29.6%) and drug shortage (37.4%). Among the referred, less than half completed referral (45.8%). Referral completion was 2.8 times higher among children with danger signs (p = 0.004) relative to those without danger signs, and 0.27 times lower among children who received pre-referral treatment (p average cost per case referred was US$ 4.89 and US$7.35 per case completing referral. For each unit cost per case referred, caregiver out of pocket expenditure contributed 33.7%, caregivers' and CHWs' opportunity costs contributed 29.2% and 5.1% respectively and health facility costs contributed 39.6%. The mean (SD) out of pocket expenditure was US$1.65 (3.25). The mean WTP for referral was US$8.25 (14.70) and was positively associated with having received pre-referral treatment, completing referral and increasing

  5. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

  6. Harmonic Series Meets Fibonacci Sequence

    Science.gov (United States)

    Chen, Hongwei; Kennedy, Chris

    2012-01-01

    The terms of a conditionally convergent series may be rearranged to converge to any prescribed real value. What if the harmonic series is grouped into Fibonacci length blocks? Or the harmonic series is arranged in alternating Fibonacci length blocks? Or rearranged and alternated into separate blocks of even and odd terms of Fibonacci length?

  7. Globe: Lecture series

    CERN Multimedia

    2007-01-01

    The LHC: an accelerator of science This series of lectures is all about understanding the scientific and technological challenges of the phenomenal LHC project and assessing its innovations through their everyday applications. Come and take a sneak preview of the LHC! Communicate: the Grid, a computer of global dimensions François Grey, head of communication in CERN’s Information Technology Department How will it be possible for the 15 million billion bytes of data generated by the LHC every year to be handled and stored by a computer that doesn’t have to be the size of a skyscraper? The computer scientists have the answer: the Grid, which will harness the power of tens of thousands of computers all over the world by creating a network of computers and making them operate as one. >>> Lectures are free and require no specialist knowledge. In french. 
 >>> By reservation only: tel. +41 (0)22 767 76 76

  8. From Networks to Time Series

    Science.gov (United States)

    Shimada, Yutaka; Ikeguchi, Tohru; Shigehara, Takaomi

    2012-10-01

    In this Letter, we propose a framework to transform a complex network to a time series. The transformation from complex networks to time series is realized by the classical multidimensional scaling. Applying the transformation method to a model proposed by Watts and Strogatz [Nature (London) 393, 440 (1998)], we show that ring lattices are transformed to periodic time series, small-world networks to noisy periodic time series, and random networks to random time series. We also show that these relationships are analytically held by using the circulant-matrix theory and the perturbation theory of linear operators. The results are generalized to several high-dimensional lattices.

  9. Restriction of complementary series representations of O(1,N) to symmetric subgroups

    DEFF Research Database (Denmark)

    Möllers, Jan; Oshima, Yoshiki

    by a direct integral of principal series representations whereas the discrete part consists of finitely many complementary series representations. The explicit Plancherel formula is computed on the Fourier transformed side of the non-compact realization of the complementary series by using the spectral...

  10. Restriction of complementary series representations of $O(1,N)$ to symmetric subgroups

    DEFF Research Database (Denmark)

    Möllers, Jan; Oshima, Yoshiki

    2012-01-01

    is given by a direct integral of principal series representations whereas the discrete part consists of finitely many complementary series representations. The explicit Plancherel formula is computed on the Fourier transformed side of the non-compact realization of the complementary series by using...

  11. Integral-preserving integrators

    International Nuclear Information System (INIS)

    McLaren, D I; Quispel, G R W

    2004-01-01

    Ordinary differential equations having a first integral may be solved numerically using one of several methods, with the integral preserved to machine accuracy. One such method is the discrete gradient method. It is shown here that the order of the method can be bootstrapped repeatedly to higher orders of accuracy. The method is illustrated using the Henon-Heiles system. (letter to the editor)

  12. Series of Bessel and Kummer-type functions

    CERN Document Server

    Baricz, Arpad; Pogány, Tibor K

    2017-01-01

    This book is devoted to the study of certain integral representations for Neumann, Kapteyn, Schlömilch, Dini and Fourier series of Bessel and other special functions, such as Struve and von Lommel functions. The aim is also to find the coefficients of the Neumann and Kapteyn series, as well as closed-form expressions and summation formulas for the series of Bessel functions considered. Some integral representations are deduced using techniques from the theory of differential equations. The text is aimed at a mathematical audience, including graduate students and those in the scientific community who are interested in a new perspective on Fourier–Bessel series, and their manifold and polyvalent applications, mainly in general classical analysis, applied mathematics and mathematical physics.

  13. The Surtsey Magma Series.

    Science.gov (United States)

    Schipper, C Ian; Jakobsson, Sveinn P; White, James D L; Michael Palin, J; Bush-Marcinowski, Tim

    2015-06-26

    The volcanic island of Surtsey (Vestmannaeyjar, Iceland) is the product of a 3.5-year-long eruption that began in November 1963. Observations of magma-water interaction during pyroclastic episodes made Surtsey the type example of shallow-to-emergent phreatomagmatic eruptions. Here, in part to mark the 50(th) anniversary of this canonical eruption, we present previously unpublished major-element whole-rock compositions, and new major and trace-element compositions of sideromelane glasses in tephra collected by observers and retrieved from the 1979 drill core. Compositions became progressively more primitive as the eruption progressed, with abrupt changes corresponding to shifts between the eruption's four edifices. Trace-element ratios indicate that the chemical variation is best explained by mixing of different proportions of depleted ridge-like basalt, with ponded, enriched alkalic basalt similar to that of Iceland's Eastern Volcanic Zone; however, the systematic offset of Surtsey compositions to lower Nb/Zr than other Vestmannaeyjar lavas indicates that these mixing end members are as-yet poorly contained by compositions in the literature. As the southwestern-most volcano in the Vestmannaeyjar, the geochemistry of the Surtsey Magma Series exemplifies processes occurring within ephemeral magma bodies on the extreme leading edge of a propagating off-axis rift in the vicinity of the Iceland plume.

  14. Modelling bursty time series

    International Nuclear Information System (INIS)

    Vajna, Szabolcs; Kertész, János; Tóth, Bálint

    2013-01-01

    Many human-related activities show power-law decaying interevent time distribution with exponents usually varying between 1 and 2. We study a simple task-queuing model, which produces bursty time series due to the non-trivial dynamics of the task list. The model is characterized by a priority distribution as an input parameter, which describes the choice procedure from the list. We give exact results on the asymptotic behaviour of the model and we show that the interevent time distribution is power-law decaying for any kind of input distributions that remain normalizable in the infinite list limit, with exponents tunable between 1 and 2. The model satisfies a scaling law between the exponents of interevent time distribution (β) and autocorrelation function (α): α + β = 2. This law is general for renewal processes with power-law decaying interevent time distribution. We conclude that slowly decaying autocorrelation function indicates long-range dependence only if the scaling law is violated. (paper)

  15. Outlier Detection in Structural Time Series Models

    DEFF Research Database (Denmark)

    Marczak, Martyna; Proietti, Tommaso

    investigate via Monte Carlo simulations how this approach performs for detecting additive outliers and level shifts in the analysis of nonstationary seasonal time series. The reference model is the basic structural model, featuring a local linear trend, possibly integrated of order two, stochastic seasonality......Structural change affects the estimation of economic signals, like the underlying growth rate or the seasonally adjusted series. An important issue, which has attracted a great deal of attention also in the seasonal adjustment literature, is its detection by an expert procedure. The general......–to–specific approach to the detection of structural change, currently implemented in Autometrics via indicator saturation, has proven to be both practical and effective in the context of stationary dynamic regression models and unit–root autoregressions. By focusing on impulse– and step–indicator saturation, we...

  16. From Fourier Series to Rapidly Convergent Series for Zeta(3)

    DEFF Research Database (Denmark)

    Scheufens, Ernst E

    2011-01-01

    The article presents a mathematical study which investigates the exact values of the Riemann zeta (ζ) function. It states that exact values can be determined from Fourier series for periodic versions of even power functions. It notes that using power series for logarithmic functions on this such ......The article presents a mathematical study which investigates the exact values of the Riemann zeta (ζ) function. It states that exact values can be determined from Fourier series for periodic versions of even power functions. It notes that using power series for logarithmic functions...

  17. Series expansion in fractional calculus and fractional differential equations

    OpenAIRE

    Li, Ming-Fan; Ren, Ji-Rong; Zhu, Tao

    2009-01-01

    Fractional calculus is the calculus of differentiation and integration of non-integer orders. In a recently paper (Annals of Physics 323 (2008) 2756-2778), the Fundamental Theorem of Fractional Calculus is highlighted. Based on this theorem, in this paper we introduce fractional series expansion method to fractional calculus. We define a kind of fractional Taylor series of an infinitely fractionally-differentiable function. Further, based on our definition we generalize hypergeometric functio...

  18. Variable Selection in Time Series Forecasting Using Random Forests

    Directory of Open Access Journals (Sweden)

    Hristos Tyralis

    2017-10-01

    Full Text Available Time series forecasting using machine learning algorithms has gained popularity recently. Random forest is a machine learning algorithm implemented in time series forecasting; however, most of its forecasting properties have remained unexplored. Here we focus on assessing the performance of random forests in one-step forecasting using two large datasets of short time series with the aim to suggest an optimal set of predictor variables. Furthermore, we compare its performance to benchmarking methods. The first dataset is composed by 16,000 simulated time series from a variety of Autoregressive Fractionally Integrated Moving Average (ARFIMA models. The second dataset consists of 135 mean annual temperature time series. The highest predictive performance of RF is observed when using a low number of recent lagged predictor variables. This outcome could be useful in relevant future applications, with the prospect to achieve higher predictive accuracy.

  19. Convergent WKB Series--How Can It be ?

    International Nuclear Information System (INIS)

    Ezawa, Hiroshi; Nakamura, Toru; Watanabe, Keiji

    2008-01-01

    Schroedinger equation for a polynomial potential with the highest order term having an even power and a positive coefficient is solved for high eigenvalues E n in two different ways after Liouville transformation, (a) converting the differential equation into integral equation and solving it iteratively and (b) by the WKB method. While the series solution in powers of 1/√(E n ) from (b) is known to diverge, we show that the one from (a) converges. We show then that asymptotic re-expansion of the convergent series from (a) agrees with the divergent series from (b). Actually, we have been able to show the agreement only up to order (1/√(E n )) 5 , but we believe that it holds to all orders. If this is true, the divergent WKB series can be reorganized into a convergent series, which is in fact obtained by the method of iteration (a)

  20. Time Series with Long Memory

    OpenAIRE

    西埜, 晴久

    2004-01-01

    The paper investigates an application of long-memory processes to economic time series. We show properties of long-memory processes, which are motivated to model a long-memory phenomenon in economic time series. An FARIMA model is described as an example of long-memory model in statistical terms. The paper explains basic limit theorems and estimation methods for long-memory processes in order to apply long-memory models to economic time series.

  1. Current Control of Grid Converters Connected with Series AC Capacitor

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Blaabjerg, Frede; Loh, Poh Chiang

    2015-01-01

    The series ac capacitor has recently been used with the transformerless grid-connected converters in the distribution power grids. The capacitive characteristic of the resulting series LC filter restricts the use of conventional synchronous integral or stationary resonant current controllers. Thus...... this paper proposes a fourth-order resonant controller in the stationary frame, which guarantees a zero steady-state current tracking error for the grid converters with series LC filter. This method is then implemented in a three-phase experimental system for verification, where the current harmonics below...... the LC filter resonance frequency are effectively eliminated. Experimental results confirm the validity of the proposed current control scheme....

  2. Convergence of the Distorted Wave Born series

    International Nuclear Information System (INIS)

    MacMillan, D.S.

    1981-01-01

    The aim of this thesis is to begin to understand the idea of reaction mechanisms in nonrelativistic scattering systems. If we have a complete reaction theory of a particular scattering system, then we claim that the theory itself must contain information about important reaction mechanisms in the system. This information can be used to decide what reaction mechanisms should be included in an approximate calculation. To investigate this claim, we studied several solvable models. The primary concept employed in studying our models is the convergence of the multistep series generated by iterating the corresponding scattering integral equation. We known that the eigenvalues of the kernel of the Lippmann-Schwinger equation for potential scattering determine the rate of convergence of the Born series. The Born series will converge only if these eigenvalues all life within the unit circle. We extend these results to a study of the distorted wave Born series for inelastic scattering. The convergence criterion tells us when approximations are valid. We learn how the convergence of the distorted wave series depends upon energy, coupling constants, angular momentum, and angular momentum transfer. In one of our models, we look at several possible distorting potentials to see which one gives the best convergence. We have also applied our results to several actual DWBA or coupled channel calculations in the literature. In addition to the study of models of two-body scattering systems, we have considered the case of rearrangement scattering. We have discussed the formulation of (N greater than or equal to 3)-body distorted wave equations in which the interior dynamics have been redistributed by introducing compact N-body distortion potentials

  3. Smart Grid Educational Series | Energy Systems Integration Facility | NREL

    Science.gov (United States)

    , 2016. Download Presentation PDF Role of Software Defined Networking and WAN Virtualization in Securing (ISO), hosted a webinar on April 27, 2016, on the role of software defined networking and WAN presentation PDF IoT/PowerMatcher Transactive Energy for Smart Cities William J. Miller, President of MaCT USA

  4. Series-connected substrate-integrated lead-carbon hybrid ...

    Indian Academy of Sciences (India)

    Voltage-management circuit for the ultracapacitor is presented, and its effectiveness is validated experimentally. Keywords. ... the ultracapacitor and reduces its operational voltage. ... another due to manufacturing process tolerance.6–8 The man- ..... chemical power sources, J Garche (ed) (Amsterdam: Elsevier) vol. 4. 4.

  5. Classroom Issues with Series Tests

    Science.gov (United States)

    Sadek, Jawad; Euler, Russell

    2005-01-01

    We find infinite series in calculus to be one of the most confusing topics our students encounter. In this note, we look at some issues that our students find difficult or ambiguous involving the Ratio Test, the Root Test, and also the Alternating Series Test. We offer some suggestions and some examples, which could be a supplement to the set of…

  6. Convergence of a Catalan Series

    Science.gov (United States)

    Koshy, Thomas; Gao, Zhenguang

    2012-01-01

    This article studies the convergence of the infinite series of the reciprocals of the Catalan numbers. We extract the sum of the series as well as some related ones, illustrating the power of the calculus in the study of the Catalan numbers.

  7. Forecasting Cryptocurrencies Financial Time Series

    DEFF Research Database (Denmark)

    Catania, Leopoldo; Grassi, Stefano; Ravazzolo, Francesco

    2018-01-01

    This paper studies the predictability of cryptocurrencies time series. We compare several alternative univariate and multivariate models in point and density forecasting of four of the most capitalized series: Bitcoin, Litecoin, Ripple and Ethereum. We apply a set of crypto–predictors and rely...

  8. Calculation of generalized secant integral using binomial coefficients

    International Nuclear Information System (INIS)

    Guseinov, I.I.; Mamedov, B.A.

    2004-01-01

    A single series expansion relation is derived for the generalized secant (GS) integral in terms of binomial coefficients, exponential integrals and incomplete gamma functions. The convergence of the series is tested by the concrete cases of parameters. The formulas given in this study for the evaluation of GS integral show good rate of convergence and numerical stability

  9. Normalizations of Eisenstein integrals for reductive symmetric spaces

    NARCIS (Netherlands)

    van den Ban, E.P.; Kuit, Job

    2017-01-01

    We construct minimal Eisenstein integrals for a reductive symmetric space G/H as matrix coefficients of the minimal principal series of G. The Eisenstein integrals thus obtained include those from the \\sigma-minimal principal series. In addition, we obtain related Eisenstein integrals, but with

  10. Integration with respect to the Euler characteristic and its applications

    Energy Technology Data Exchange (ETDEWEB)

    Gusein-Zade, Sabir M [M. V. Lomonosov Moscow State University, Moscow (Russian Federation)

    2010-09-16

    The notion of integration with respect to the Euler characteristic and its generalizations are discussed: integration over the infinite-dimensional spaces of arcs and functions, motivic integration. The author describes applications of these notions to the computation of monodromy zeta functions, Poincare series of multi-index filtrations, generating series of classes of certain moduli spaces, and so on. Bibliography: 70 titles.

  11. Report on investigations in fiscal 2000 on the projects to support introduction of environment friendly coal utilization system. Green helmet project for briquette production plant - Mae Moh coal mine, Thailand; 2000 nendo kankyo chowagata sekitan riyo system donyu shien jigyo chosa hokokusho. Briquette seizo setsubi ni kakawaru green helmet jigyo (Thai koku Mae Moh tanko)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    This Green Helmet Project is intended to suppress generation of environment polluting substances in association with coal utilization in Thailand by demonstrating and improving the proliferation infrastructure for the clean coal technology to be used widely in Thailand. The project is also intended to serve for stabilized assurance of energies for Japan. The demonstration project related to briquette manufacturing facilities executed as one of the 'Projects to support introduction of environment friendly coal utilization system' is intended to manufacture at low cost a briquette which is low in odor, free of smoke, and suppressed largely of sulfur oxide generation. The briquette is made by adding clayish minerals, sulfur, a fixing agent and a binder into brown coal being a low grade coal. The project implements proliferation of the technology to reduce environmental load associated with coal utilization in developing countries according to the situation and needs of the counterpart countries. The present project has performed the site surveys and guidance of operation and maintenance techniques as follow-up works of the demonstration project having been completed by cooperation between Japan and Thailand. It is considered that what had been intended in the beginning has been achieved sufficiently. (NEDO)

  12. Time series analysis time series analysis methods and applications

    CERN Document Server

    Rao, Tata Subba; Rao, C R

    2012-01-01

    The field of statistics not only affects all areas of scientific activity, but also many other matters such as public policy. It is branching rapidly into so many different subjects that a series of handbooks is the only way of comprehensively presenting the various aspects of statistical methodology, applications, and recent developments. The Handbook of Statistics is a series of self-contained reference books. Each volume is devoted to a particular topic in statistics, with Volume 30 dealing with time series. The series is addressed to the entire community of statisticians and scientists in various disciplines who use statistical methodology in their work. At the same time, special emphasis is placed on applications-oriented techniques, with the applied statistician in mind as the primary audience. Comprehensively presents the various aspects of statistical methodology Discusses a wide variety of diverse applications and recent developments Contributors are internationally renowened experts in their respect...

  13. Summable series and convergence factors

    CERN Document Server

    Moore, Charles N

    1938-01-01

    Fairly early in the development of the theory of summability of divergent series, the concept of convergence factors was recognized as of fundamental importance in the subject. One of the pioneers in this field was C. N. Moore, the author of the book under review.... Moore classifies convergence factors into two types. In type I he places the factors which have only the property that they preserve convergence for a convergent series or produce convergence for a summable series. In type II he places the factors which not only maintain or produce convergence but have the additional property that

  14. Fourier series and orthogonal polynomials

    CERN Document Server

    Jackson, Dunham

    2004-01-01

    This text for undergraduate and graduate students illustrates the fundamental simplicity of the properties of orthogonal functions and their developments in related series. Starting with a definition and explanation of the elements of Fourier series, the text follows with examinations of Legendre polynomials and Bessel functions. Boundary value problems consider Fourier series in conjunction with Laplace's equation in an infinite strip and in a rectangle, with a vibrating string, in three dimensions, in a sphere, and in other circumstances. An overview of Pearson frequency functions is followe

  15. Time series with tailored nonlinearities

    Science.gov (United States)

    Räth, C.; Laut, I.

    2015-10-01

    It is demonstrated how to generate time series with tailored nonlinearities by inducing well-defined constraints on the Fourier phases. Correlations between the phase information of adjacent phases and (static and dynamic) measures of nonlinearities are established and their origin is explained. By applying a set of simple constraints on the phases of an originally linear and uncorrelated Gaussian time series, the observed scaling behavior of the intensity distribution of empirical time series can be reproduced. The power law character of the intensity distributions being typical for, e.g., turbulence and financial data can thus be explained in terms of phase correlations.

  16. Models for dependent time series

    CERN Document Server

    Tunnicliffe Wilson, Granville; Haywood, John

    2015-01-01

    Models for Dependent Time Series addresses the issues that arise and the methodology that can be applied when the dependence between time series is described and modeled. Whether you work in the economic, physical, or life sciences, the book shows you how to draw meaningful, applicable, and statistically valid conclusions from multivariate (or vector) time series data.The first four chapters discuss the two main pillars of the subject that have been developed over the last 60 years: vector autoregressive modeling and multivariate spectral analysis. These chapters provide the foundational mater

  17. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... and what other conditions are associated with RA. Learning more about your condition will allow you to ... Arthritis Educational Video Series Psoriatic Arthritis 101 2010 E.S.C.A.P.E. Study Patient Update Transitioning ...

  18. Clustering of financial time series

    Science.gov (United States)

    D'Urso, Pierpaolo; Cappelli, Carmela; Di Lallo, Dario; Massari, Riccardo

    2013-05-01

    This paper addresses the topic of classifying financial time series in a fuzzy framework proposing two fuzzy clustering models both based on GARCH models. In general clustering of financial time series, due to their peculiar features, needs the definition of suitable distance measures. At this aim, the first fuzzy clustering model exploits the autoregressive representation of GARCH models and employs, in the framework of a partitioning around medoids algorithm, the classical autoregressive metric. The second fuzzy clustering model, also based on partitioning around medoids algorithm, uses the Caiado distance, a Mahalanobis-like distance, based on estimated GARCH parameters and covariances that takes into account the information about the volatility structure of time series. In order to illustrate the merits of the proposed fuzzy approaches an application to the problem of classifying 29 time series of Euro exchange rates against international currencies is presented and discussed, also comparing the fuzzy models with their crisp version.

  19. "Feeling" Series and Parallel Resistances.

    Science.gov (United States)

    Morse, Robert A.

    1993-01-01

    Equipped with drinking straws and stirring straws, a teacher can help students understand how resistances in electric circuits combine in series and in parallel. Follow-up suggestions are provided. (ZWH)

  20. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... of Body Weight in Osteoarthritis Educational Videos for Patients Rheumatoid Arthritis Educational Video Series Psoriatic Arthritis 101 ... Patient to an Adult Rheumatologist Drug Information for Patients Arthritis Drug Information Sheets Benefits and Risks of ...

  1. A Generalized Technique in Numerical Integration

    Science.gov (United States)

    Safouhi, Hassan

    2018-02-01

    Integration by parts is one of the most popular techniques in the analysis of integrals and is one of the simplest methods to generate asymptotic expansions of integral representations. The product of the technique is usually a divergent series formed from evaluating boundary terms; however, sometimes the remaining integral is also evaluated. Due to the successive differentiation and anti-differentiation required to form the series or the remaining integral, the technique is difficult to apply to problems more complicated than the simplest. In this contribution, we explore a generalized and formalized integration by parts to create equivalent representations to some challenging integrals. As a demonstrative archetype, we examine Bessel integrals, Fresnel integrals and Airy functions.

  2. RUVIVAL Publication Series Volume 3

    OpenAIRE

    Behrendt, Joachim; Fröndhoff, Dario; Munoz Ardila, Andrea; Orlina, Maria Monina; Rueda Morales, Máryeluz; Schaldach, Ruth; Schaldach, Ruth; Otterpohl, Ralf

    2018-01-01

    RUVIVAL Publication Series is a compilation of literature reviews on topics concerned with the revitalisation of rural areas. RUVIVAL Publication Series is part of the e-learning project RUVIVAL and each of the three contributions in this publication is connected to further interactive multimedia material, which can be reached under www.ruvival.de. The first literature review is concerned with urine utilisation as a fertiliser in agriculture. Urine contains four important nutrients for pla...

  3. Omega test series - an overview

    International Nuclear Information System (INIS)

    Knowles, C.P.

    2001-01-01

    The United States Defense Threat Reduction Agency (DTRA) has supported a series of high explosive calibration experiments that were conducted in the Degelen Mountain area of the Semipalatinsk Test Site (STS) in the Republic of Kazakhstan (ROK). This paper will provide an overview of the second and third tests of this series which have been designated Omega-2 and Omega-3. Omega-2 was conducted on Saturday, September 25, 1999 and Omega-3 on Saturday, July 29, 2000. (author)

  4. Forecasting Cryptocurrencies Financial Time Series

    OpenAIRE

    Catania, Leopoldo; Grassi, Stefano; Ravazzolo, Francesco

    2018-01-01

    This paper studies the predictability of cryptocurrencies time series. We compare several alternative univariate and multivariate models in point and density forecasting of four of the most capitalized series: Bitcoin, Litecoin, Ripple and Ethereum. We apply a set of crypto–predictors and rely on Dynamic Model Averaging to combine a large set of univariate Dynamic Linear Models and several multivariate Vector Autoregressive models with different forms of time variation. We find statistical si...

  5. Digital front-end module (DFEM) series; Digital front end module (DFEM) series

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The digital front-end module (DFEM) is a module in which the processes ranging from the reception of digitally modulated radiofrequencies to the output of digital IF (Intermediate Frequency) signals or data streams are integrated. Beginning with a module for the MCNS (Multimedia Cable Network System) cable modem which was the first module in this business field approved by the Cable Labs, U.S., Toshiba has developed a series of DFEMs for various digital media for satellites, ground waves, and CATV (Cable Television) systems. The series is characterized by (1) the serialization of DFEMs compatible with various digital modulation techniques such as 8 PSK (Phase Shift Keying), OFDM (Orthogonal Frequency Division Multiplexing), and 256 QAM (Quadrature Amplitude Modulation), (2) easy connection with digital circuits thanks to the high shielding effect, and (3) the achievement of smaller size, higher performance, and lower power consumption. (translated by NEDO)

  6. Elliptic genera and characteristic q-series of superconformal field theory

    Directory of Open Access Journals (Sweden)

    L. Bonora

    2015-06-01

    Full Text Available We analyze the characteristic series, the KO series and the series associated with the Witten genus, and their analytic forms as the q-analogs of classical special functions (in particular q-analog of the beta integral and the gamma function. q-Series admit an analytic interpretation in terms of the spectral Ruelle functions, and their relations with appropriate elliptic modular forms can be described. We show that there is a deep correspondence between the characteristic series of the Witten genus and KO characteristic series, on one side, and the denominator identities and characters of N=2 superconformal algebras, and the affine Lie (superalgebras on the other. We represent the characteristic series in the form of double series using the Hecke–Rogers modular identity.

  7. Stochastic models for time series

    CERN Document Server

    Doukhan, Paul

    2018-01-01

    This book presents essential tools for modelling non-linear time series. The first part of the book describes the main standard tools of probability and statistics that directly apply to the time series context to obtain a wide range of modelling possibilities. Functional estimation and bootstrap are discussed, and stationarity is reviewed. The second part describes a number of tools from Gaussian chaos and proposes a tour of linear time series models. It goes on to address nonlinearity from polynomial or chaotic models for which explicit expansions are available, then turns to Markov and non-Markov linear models and discusses Bernoulli shifts time series models. Finally, the volume focuses on the limit theory, starting with the ergodic theorem, which is seen as the first step for statistics of time series. It defines the distributional range to obtain generic tools for limit theory under long or short-range dependences (LRD/SRD) and explains examples of LRD behaviours. More general techniques (central limit ...

  8. Series

    Indian Academy of Sciences (India)

    Prakash

    (American) English two years later (Wollman and Jacob. 1961). The emergence of ... Words have an important role in scientific knowledge. According to the ... we lack the right words to describe them” (quoted in Jacob et al. 1953). There is a ...

  9. Series

    Indian Academy of Sciences (India)

    Madhu

    2006-07-31

    Jul 31, 2006 ... By comparison, the fall in temperature with depth (and ... gases and of ballast and buoyancy control. ... to an old-fashioned diving bell, with air that it carries down ..... Working in Ghana, Stride (1955) noticed that adults of.

  10. The Integration Movement in the Caribbean at Crossroads: Towards a New Approach of Integration

    OpenAIRE

    Uziel Nogueira

    1997-01-01

    The Institute for the Integration of Latin America and the Caribbean (INTAL) has inaugurated a Working Papers Series with the publication of a study by Uziel Nogueira, the Institute's Economist. Entitled "The Integration Movement in the Caribbean at the Crossroads: Towards a New Approach to Integration", the study opens with an overview of the movement towards integration among the English-speaking countries of the Caribbean. It continues with an analysis of the integration process during thi...

  11. Diophantine approximation and Dirichlet series

    CERN Document Server

    Queffélec, Hervé

    2013-01-01

    This self-contained book will benefit beginners as well as researchers. It is devoted to Diophantine approximation, the analytic theory of Dirichlet series, and some connections between these two domains, which often occur through the Kronecker approximation theorem. Accordingly, the book is divided into seven chapters, the first three of which present tools from commutative harmonic analysis, including a sharp form of the uncertainty principle, ergodic theory and Diophantine approximation to be used in the sequel. A presentation of continued fraction expansions, including the mixing property of the Gauss map, is given. Chapters four and five present the general theory of Dirichlet series, with classes of examples connected to continued fractions, the famous Bohr point of view, and then the use of random Dirichlet series to produce non-trivial extremal examples, including sharp forms of the Bohnenblust-Hille theorem. Chapter six deals with Hardy-Dirichlet spaces, which are new and useful Banach spaces of anal...

  12. The Knossos Od Series. An Epigraphical Study

    DEFF Research Database (Denmark)

    Nosch, Marie-Louise Bech

    This study is an epigraphical investigation of the Linear B records from the West Wing in the palace of Knossos. Its focus is the group of 61 unclassified Od tablets with the ideogram for wool. The author presents a new classification of the Od tablets by identifying new sets, and by integrating...... unclassified Od tablets into existing Od sets or into other series recording wool, such as the two well known and thoroughly researched "bureaux", the textile and the sheep administration. Recent work by FIRTH on find-places has provided new insights for this study. In the present study, 29 prefix changes...... are suggested. Only few unclassified Od tablets, however, can be associated with the initial parts of textile production in which scribes 103 and 113 set targets and manage the production. Rather, many unclassified Od tablets belong to the final stages of the textile production, that is, the finishing...

  13. Integrated economics

    International Nuclear Information System (INIS)

    Bratton, T.J.

    1992-01-01

    This article offers ideas for evaluating integrated solid waste management systems through the use of a conceptual cost overview. The topics of the article include the integrated solid waste management system; making assumptions about community characteristics, waste generation rates, waste collection responsibility, integrated system components, sizing and economic life of system facilities, system implementation schedule, facility ownership, and system administration; integrated system costs; integrated system revenues; system financing; cost projections; and making decisions

  14. A Quest for Open Helmets

    DEFF Research Database (Denmark)

    Christoffersen, Lisbet

    2012-01-01

    The Danish burqa-affair contains a prohibition of wearing religious and political symbols in court as well as a re-interpretation of existing legislation in order to identify where within the limits of freedom of religion it is possible to make prohibitions towards the use of the burqa....... The reactions are in this article interpreted as concerning central values such as open-minded-ness and equality combined with respect for freedom of religion also in public institutions, understood as representing 'the people' as common...

  15. LWH & ACH Helmet Hardware Study

    Science.gov (United States)

    2015-11-30

    cut in half lengthwise, mounted in epoxy , and polished, as shown in Figure 3, then the grain microstructure examined via optical metallography...saw, and mounted in epoxy and cured at room temperature. Initial manual sanding of the cut surfaces was no coarser than 600 grit silicon-carbide...initial attempts to perform impact tests using screws mounted in Kevlar composite panels resulted in little damage to the screws, but a lot of

  16. Microprocessor Card for Cuban Series polarimeters Laserpol

    International Nuclear Information System (INIS)

    Arista Romeu, E.; Mora Mazorra, W.

    2012-01-01

    We present the design consists of a card based on a micro-processor 8-bit adds new software components and their basic living, which allow to deliver new services and expand the possibilities for use in other applications of the polarimeter LASERPOL series, as the polarimetric detection. Given the limitations of the original card it was necessary to introduce a series of changes that would allow to address new user requirements, and expand the possible applications of the instruments. This was done the expansion of the capacity of the EPROM and RAM memory, the decoder circuit was implemented memory map using a programmable integrated circuit, and introduced a real time clock with nonvolatile RAM, these features are exploited to the introduction of new features such as the realization of the polarimeter calibration by the user from a sample pattern or a calibration pattern used as a reference, and the incorporation of the time and date to the reports of measurements required industry for quality control processes. Card that is achieved along with the rest of the components is compatible with polarimeters LASERPOL 101M Series, 3M and LP4, pin to pin, which facilitates their incorporation into the polarimeters in operation in the industry 'in situ' replacement cards from previous models, allowing to extend the possibilities of statistical processing, precision and accuracy of the instruments. Improved measurements in the industry, resulting in significant savings by elimination of losses in production and raw materials. The improved response speed of reading the polarimeters LASERPOL Use and polarimetric detectors. (Author)

  17. Volterra Series Based Distortion Effect

    DEFF Research Database (Denmark)

    Agerkvist, Finn T.

    2010-01-01

    A large part of the characteristic sound of the electric guitar comes from nonlinearities in the signal path. Such nonlinearities may come from the input- or output-stage of the amplier, which is often equipped with vacuum tubes or a dedicated distortion pedal. In this paper the Volterra series...... expansion for non linear systems is investigated with respect to generating good distortion. The Volterra series allows for unlimited adjustment of the level and frequency dependency of each distortion component. Subjectively relevant ways of linking the dierent orders are discussed....

  18. Connected to TV series: Quantifying series watching engagement.

    Science.gov (United States)

    Tóth-Király, István; Bőthe, Beáta; Tóth-Fáber, Eszter; Hága, Győző; Orosz, Gábor

    2017-12-01

    Background and aims Television series watching stepped into a new golden age with the appearance of online series. Being highly involved in series could potentially lead to negative outcomes, but the distinction between highly engaged and problematic viewers should be distinguished. As no appropriate measure is available for identifying such differences, a short and valid measure was constructed in a multistudy investigation: the Series Watching Engagement Scale (SWES). Methods In Study 1 (N Sample1  = 740 and N Sample2  = 740), exploratory structural equation modeling and confirmatory factor analysis were used to identify the most important facets of series watching engagement. In Study 2 (N = 944), measurement invariance of the SWES was investigated between males and females. In Study 3 (N = 1,520), latent profile analysis (LPA) was conducted to identify subgroups of viewers. Results Five factors of engagement were identified in Study 1 that are of major relevance: persistence, identification, social interaction, overuse, and self-development. Study 2 supported the high levels of equivalence between males and females. In Study 3, three groups of viewers (low-, medium-, and high-engagement viewers) were identified. The highly engaged at-risk group can be differentiated from the other two along key variables of watching time and personality. Discussion The present findings support the overall validity, reliability, and usefulness of the SWES and the results of the LPA showed that it might be useful to identify at-risk viewers before the development of problematic use.

  19. French N4 Series Design and Manufacturing

    International Nuclear Information System (INIS)

    Lebreton, Gerard

    1989-01-01

    The construction contract for the first two N4 units. on the Chooz site close to the French-Belgian border (Chooz B1 and B2). was awarded by Electricite de France (EDF) to Fumarate in May 1984. At present, project construction is approximately 50% complete for unit B1. The main civil works are practically finished and the reactor vessel and the steam generator were delivered on site by mid-1988. The connection to the grid by 1991 appears quite feasible. Continuation of the French nuclear power programme in the 1990s, specifically on the CIVEX and Penly sites, is based on this model. The N4 thus follows the four-loop, 1,300 MW class series designated P.a. whose first unit is Cattenom 1, which will serve in the following as a reference to appreciate the design evolution of the N4 NSSS. The design evolutions selected to reach these objectives are in technical continuity with the previous series, integrate the vast experience gained within the French programme and abroad, and were supported by a large R and D programme and further by industrial qualification tests

  20. Integrated Virtual Environment Test Concepts and Objectives

    National Research Council Canada - National Science Library

    Tackett, Gregory

    2001-01-01

    ...), a series of integration and verification tests were conducted to provide development milestones for the simulation architecture and tools that would be needed for the full-up live/virtual field experiment...

  1. Integrability and boundary conditions of supersymmetric systems

    International Nuclear Information System (INIS)

    Yue Ruihong; Liang Hong

    1996-01-01

    By studying the solutions of the reflection equations, we find out a series of integrable supersymmetric systems with different boundary conditions. The Hamiltonian contains four free parameters which describe the contribution of the boundary terms

  2. The Integrated Day Comes to College.

    Science.gov (United States)

    Walton, Sherry; And Others

    1986-01-01

    Describes how a university faculty used Carl Sagan's "Cosmos" series as a vehicle for demonstrating the integrated curriculum approach to instruction, modeling this approach with their pre-service teachers. A daily account of the week's activities is provided. (JDH)

  3. Off-diagonal series expansion for quantum partition functions

    Science.gov (United States)

    Hen, Itay

    2018-05-01

    We derive an integral-free thermodynamic perturbation series expansion for quantum partition functions which enables an analytical term-by-term calculation of the series. The expansion is carried out around the partition function of the classical component of the Hamiltonian with the expansion parameter being the strength of the off-diagonal, or quantum, portion. To demonstrate the usefulness of the technique we analytically compute to third order the partition functions of the 1D Ising model with longitudinal and transverse fields, and the quantum 1D Heisenberg model.

  4. How to statistically analyze nano exposure measurement results: Using an ARIMA time series approach

    NARCIS (Netherlands)

    Klein Entink, R.H.; Fransman, W.; Brouwer, D.H.

    2011-01-01

    Measurement strategies for exposure to nano-sized particles differ from traditional integrated sampling methods for exposure assessment by the use of real-time instruments. The resulting measurement series is a time series, where typically the sequential measurements are not independent from each

  5. Use of Time-Series, ARIMA Designs to Assess Program Efficacy.

    Science.gov (United States)

    Braden, Jeffery P.; And Others

    1990-01-01

    Illustrates use of time-series designs for determining efficacy of interventions with fictitious data describing drug-abuse prevention program. Discusses problems and procedures associated with time-series data analysis using Auto Regressive Integrated Moving Averages (ARIMA) models. Example illustrates application of ARIMA analysis for…

  6. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Patients from Johns Hopkins Stategies to Increase your Level of Physical Activity Role of Body Weight in Osteoarthritis Educational Videos for Patients Rheumatoid Arthritis Educational Video Series Psoriatic Arthritis 101 2010 E.S.C.A.P.E. Study Patient Update Transitioning the JRA ...

  7. FOURIER SERIES MODELS THROUGH TRANSFORMATION

    African Journals Online (AJOL)

    DEPT

    monthly temperature data (1996 – 2005) collected from the National Root ... KEY WORDS: Fourier series, square transformation, multiplicative model, ... fluctuations or movements are often periodic(Ekpeyong,2005). .... significant trend or not, if the trend is not significant, the grand mean may be used as an estimate of trend.

  8. Integer-valued time series

    NARCIS (Netherlands)

    van den Akker, R.

    2007-01-01

    This thesis adresses statistical problems in econometrics. The first part contributes statistical methodology for nonnegative integer-valued time series. The second part of this thesis discusses semiparametric estimation in copula models and develops semiparametric lower bounds for a large class of

  9. Locations in television drama series

    DEFF Research Database (Denmark)

    Waade, Anne Marit

    in the extra bonus material (Gray, 2010; Waade, 2013), and film tours and film apps become part of the television series’ trans-media franchise (Reijnders, 2011; Thompson, 2007). Location has so far been a practical term describing the place where the series is shot. Ellis (1992) used to see location...

  10. Bell numbers, determinants and series

    Indian Academy of Sciences (India)

    In this article, we study Bell numbers and Uppuluri Carpenter numbers. We obtain various expressions and relations between them. These include polynomial recurrences and expressions as determinants of certain matrices of binomial coefficients. Keywords. p-adic series; Bell numbers. 1. Introduction. Bell numbers, Bn [2] ...

  11. Sums of Generalized Harmonic Series

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 20; Issue 9. Sums of Generalized Harmonic Series: For Kids from Five to Fifteen. Zurab Silagadze. General Article Volume 20 Issue 9 September 2015 pp 822-843. Fulltext. Click here to view fulltext PDF. Permanent link:

  12. Teen Addiction. Current Controversies Series.

    Science.gov (United States)

    Winters, Paul A., Ed.

    The Current Controversies series explores social, political, and economic controversies that dominate the national and international scenes today from a variety of perspectives. Recent surveys have shown that, after years of decline, drug use among teenagers has increased during the 1990s, and that alcohol and tobacco use have remained…

  13. Lower GI Series (Barium Enema)

    Science.gov (United States)

    ... uses x-rays and a chalky liquid called barium to view your large intestine . The barium will make your large intestine more visible on ... single-contrast lower GI series, which uses only barium a double-contrast or air-contrast lower GI ...

  14. Interracial America. Opposing Viewpoints Series.

    Science.gov (United States)

    Szumski, Bonnie, Ed.

    Books in the Opposing Viewpoints Series present debates about current issues that can be used to teach critical reading and thinking skills. The varied opinions in each book examine different aspects of a single issue. The topics covered in this volume explore the racial and ethnic tensions that concern many Americans today. The racial divide…

  15. Spectroscopy, Understanding the Atom Series.

    Science.gov (United States)

    Hellman, Hal

    This booklet is one of the "Understanding the Atom" Series. The science of spectroscopy is presented by a number of topics dealing with (1) the uses of spectroscopy, (2) its origin and background, (3) the basic optical systems of spectroscopes, spectrometers, and spectrophotometers, (4) the characteristics of wave motion, (5) the…

  16. International Work-Conference on Time Series

    CERN Document Server

    Pomares, Héctor; Valenzuela, Olga

    2017-01-01

    This volume of selected and peer-reviewed contributions on the latest developments in time series analysis and forecasting updates the reader on topics such as analysis of irregularly sampled time series, multi-scale analysis of univariate and multivariate time series, linear and non-linear time series models, advanced time series forecasting methods, applications in time series analysis and forecasting, advanced methods and online learning in time series and high-dimensional and complex/big data time series. The contributions were originally presented at the International Work-Conference on Time Series, ITISE 2016, held in Granada, Spain, June 27-29, 2016. The series of ITISE conferences provides a forum for scientists, engineers, educators and students to discuss the latest ideas and implementations in the foundations, theory, models and applications in the field of time series analysis and forecasting.  It focuses on interdisciplinary and multidisciplinary rese arch encompassing the disciplines of comput...

  17. Analysis of series resonant converter with series-parallel connection

    Science.gov (United States)

    Lin, Bor-Ren; Huang, Chien-Lan

    2011-02-01

    In this study, a parallel inductor-inductor-capacitor (LLC) resonant converter series-connected on the primary side and parallel-connected on the secondary side is presented for server power supply systems. Based on series resonant behaviour, the power metal-oxide-semiconductor field-effect transistors are turned on at zero voltage switching and the rectifier diodes are turned off at zero current switching. Thus, the switching losses on the power semiconductors are reduced. In the proposed converter, the primary windings of the two LLC converters are connected in series. Thus, the two converters have the same primary currents to ensure that they can supply the balance load current. On the output side, two LLC converters are connected in parallel to share the load current and to reduce the current stress on the secondary windings and the rectifier diodes. In this article, the principle of operation, steady-state analysis and design considerations of the proposed converter are provided and discussed. Experiments with a laboratory prototype with a 24 V/21 A output for server power supply were performed to verify the effectiveness of the proposed converter.

  18. Threshold corrections, generalised prepotentials and Eichler integrals

    CERN Document Server

    Angelantonj, Carlo; Pioline, Boris

    2015-06-12

    We continue our study of one-loop integrals associated to BPS-saturated amplitudes in $\\mathcal{N}=2$ heterotic vacua. We compute their large-volume behaviour, and express them as Fourier series in the complexified volume, with Fourier coefficients given in terms of Niebur-Poincar\\'e series in the complex structure modulus. The closure of Niebur-Poincar\\'e series under modular derivatives implies that such integrals derive from holomorphic prepotentials $f_n$, generalising the familiar prepotential of $\\mathcal{N}=2$ supergravity. These holomorphic prepotentials transform anomalously under T-duality, in a way characteristic of Eichler integrals. We use this observation to compute their quantum monodromies under the duality group. We extend the analysis to modular integrals with respect to Hecke congruence subgroups, which naturally arise in compactifications on non-factorisable tori and freely-acting orbifolds. In this case, we derive new explicit results including closed-form expressions for integrals involv...

  19. Integral Representations of the Catalan Numbers and Their Applications

    Directory of Open Access Journals (Sweden)

    Feng Qi

    2017-08-01

    Full Text Available In the paper, the authors survey integral representations of the Catalan numbers and the Catalan–Qi function, discuss equivalent relations between these integral representations, supply alternative and new proofs of several integral representations, collect applications of some integral representations, and present sums of several power series whose coefficients involve the Catalan numbers.

  20. Problems in mathematical analysis III integration

    CERN Document Server

    Kaczor, W J

    2003-01-01

    We learn by doing. We learn mathematics by doing problems. This is the third volume of Problems in Mathematical Analysis. The topic here is integration for real functions of one real variable. The first chapter is devoted to the Riemann and the Riemann-Stieltjes integrals. Chapter 2 deals with Lebesgue measure and integration. The authors include some famous, and some not so famous, integral inequalities related to Riemann integration. Many of the problems for Lebesgue integration concern convergence theorems and the interchange of limits and integrals. The book closes with a section on Fourier series, with a concentration on Fourier coefficients of functions from particular classes and on basic theorems for convergence of Fourier series. The book is primarily geared toward students in analysis, as a study aid, for problem-solving seminars, or for tutorials. It is also an excellent resource for instructors who wish to incorporate problems into their lectures. Solutions for the problems are provided in the boo...