WorldWideScience

Sample records for series institutional furniture

  1. The Negro in the Furniture Industry. The Racial Policies of American Industry Series.

    Science.gov (United States)

    Fulmer, William E.

    This is the twenty-eighth of a series of studies conducted to determine variances in industrial employment practices of Negroes and to develop appropriate hiring policies. This particular study sought to examine current racial employment policies in the furniture industry within the context of the industry's structure and history. Interviews with…

  2. Upgrading Wood-Based Industries: Harnessing the Social Network of Small-Scale Furniture Producers and Their Institutions

    Directory of Open Access Journals (Sweden)

    Melati ,

    2011-05-01

    Full Text Available Furniture is a major export commodity in Indonesia with a total value of USD 1.96 million in 2007.  Jepara District is one of the key location for wood furniture production with 15,271 furniture related business units employing 176,469 workers.  However, inefficiencies and power imbalances throughout the furniture value chain have resulted in overharvesting and uneven distribution of gains among the industry’s actors.  In contrast to price-setting international furniture retailers, small-scale producers enjoy the least value from their products.  In order to increase added value and competitiveness, small-scale furniture producers have made efforts to upgrade by harnessing their social network and institutions.  This paper describes small-scale furniture producers’ efforts to upgrade by utilising their social network and institutions in Jepara.  Data was collected through in-depth interviews with members of the small-scale furniture producers’ association.  The research provides insight into the nature of social networks and information flow and develops future scenarios to upgrade.  The scenarios will not only benefit the furniture industry in Jepara, but may also be adopted for similar industries throughout Indonesia and the world, and potentially improve many people’s economies and livelihoods.Keywords: wood-based industry, furniture, small-scale, social network, institution

  3. Ergo-effects of designed school furniture and sitting positions on students behaviour and Musculo-Skeletal Disorder in Nigerian tertiary institutions

    Directory of Open Access Journals (Sweden)

    A. I Musa

    2011-07-01

    Full Text Available Improper design of school furniture is one of the contributing factors to back pain among students as indicated in some studies. In the case of designing school furniture where sitting constitutes a considerable time in the school, seat becomes important for comfort. This study is carried out in three selected institutions in Nigeria to determine level of musculoskeletal disorder in students’ and the furniture that they use. 720 questionnaires with 240 students (120 boys and 120 girls drawn from each participating institutions were administered and 675 responses were received. The results show that the number of students having MSD, accounted for 93.75%. However, the distributions of pain in the body parts in each school were different. The musculoskeletal pain, mostly concentrated on neck, right shoulders right elbow right wrist right hand, upper back and lower back. The result also reveals that most of the students are sitting on chairs with seat that are too high and too deep or too shallow and of tables that are too high. However, it is recommended that further study on effect of designed school furniture and sitting position in larger sample of students’ representative in Nigeria tertiary institutions should be carried out in order to reduce the effect of body pains.

  4. Furniture design

    CERN Document Server

    Smardzewski, Jerzy

    2015-01-01

    Maximizing reader insights into the principles of designing furniture as wooden structures, this book discusses issues related to the history of furniture structures, their classification and characteristics, ergonomic approaches to anthropometric requirements and safety of use. It presents key methods and highlights common errors in designing the characteristics of the materials, components, joints and structures, as well as looking at the challenges regarding developing associated design documentation. Including analysis of how designers may go about calculating the stiffness and endurance of parts, joints and whole structures, the book analyzes questions regarding the loss of furniture stability and the resulting threats to health of the user, putting forward a concept of furniture design as an engineering processes. Creating an attractive, functional, ergonomic and safe piece of furniture is not only the fruit of the work of individual architects and artists, but requires an effort of many people working ...

  5. 41 CFR 101-25.404 - Furniture.

    Science.gov (United States)

    2010-07-01

    ...-25.404 Furniture. Furniture (office, household and quarters, and institutional) shall not be replaced unless the estimated cost of repair or rehabilitation (based on GSA term contracts), including any... which rehabilitation of the furniture at 75 percent or less of the cost of a new item would not extend...

  6. Jepara Indonesia Furniture

    OpenAIRE

    romanzick

    2016-01-01

    Jepara Indonesia Furniture A wide choice of Indonesian furniture companies provide free business listings to all types of furniture also for outlets and stores. Each section is accessible that contains a comprehensive list of our range of furniture details information and full campaign. We provided a platform create various products along with featured inspiration section related products, services, accessories. Indonesia Furniture Teak Garden Furniture It is bringing customers distinctive as...

  7. Value Criteria for School Furniture

    Science.gov (United States)

    Spellman, Walter

    2012-01-01

    Making furniture decisions can involve many factors, and they vary from institution to institution. For fixtures, furnishings and equipment, comparing initial cost with the cost of ownership over a life cycle can be more challenging. It may be the functionality of the furnishings that provides the greatest return on investment. In this article,…

  8. Technology of Furniture Production

    OpenAIRE

    Danilova, Kseniia

    2016-01-01

    Manufacturing of furniture is one of the main processes of timber utilization. Furniture of Timberica Oy brand is made by special technology which does not allow use aggressive chemicals that can be harmful to humans, in wood processing. The furniture is made of Karelian "white" pine. Company's headquarters are located in Finland, its specialists improve and carefully controlled manufacturing process at the furniture factory in Karelia. Timberica Oy has produced furniture since 1998. They...

  9. Classroom Furniture: The Mod Squad

    Science.gov (United States)

    Raths, David

    2012-01-01

    This is the first article in a six-part series on the elements of a collaborative classroom: furniture, social media, video/web conferencing tools, collaborative software, interactive devices, and mobile devices. With most universities facing tight budgets, convincing administrators to invest in expensive new classrooms is a challenge. Many higher…

  10. Fellin Furniture - disainitud kasutamiseks

    Index Scriptorium Estoniae

    2010-01-01

    Viljandis asuvast mööbliettevõttest Fellinn Furniture ja seal valmistatavast mööblist. Kollektsiooni algsed loojad on disainerid Sixten Heidmets ja Sirli Ehari. Disainis on kasutatud elemente, mis võimaldavad toodete väljanägemist kergesti muuta ja hõlpsasti ruumis paigutada. Valmistatakse ka uusi tooteid, mille disainimisele on kaasa aidanud kogu Fellin Furniture meeskond

  11. Progressive technologies in furniture design

    OpenAIRE

    Šebková, Martina

    2014-01-01

    Šebková, M. Progressive technologies in furniture design. Diploma thesis, Brno, Mendel University in Brno, 2014 Diploma thesis 'Progressive technologies in furniture design' is focused on the use of modern technologies in furniture production. The theoretical part explains the basic terms, technology and material options. It focuses mainly on the production of 3D printed furniture and possibilities of virtual testing, measurements, scanning and rapid prototyping. Practical part of diploma the...

  12. Whither North Carolina furniture manufacturing?

    OpenAIRE

    Robert L. Lacy

    2004-01-01

    North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

  13. Competing Explanations in the Evolution of the Danish Furniture Industry

    DEFF Research Database (Denmark)

    Howells, John

    This article assesses the credibility and relative economic importance of the many real and proposed unique development events in the Post-War evolution of the Danish furniture industry by means of available trade and production time series. It finds first, that the Danish industry experienced its...... only exceptional growth event compared to other developed country furniture industries in the 1950s. It is argued that this establishes as the leading causal candidates for the Danish economic specialisation in furniture; subsidised export marketing of Danish Modern style in the US and the War......-undamaged Danish industry’s opportunistic exploitation of recovering European Post-War furniture markets. Second, the apparent prominence of particle board manufacture in today’s industry is a Danish specialisation with its origin in the 1950s growth event. Third, while there is much evidence that IKEA became...

  14. Marketing Hardwoods to Furniture Producers

    Science.gov (United States)

    Steven A. Sinclair; Robert J. Bush; Philip A. Araman

    1989-01-01

    This paper discusses some of the many problems in developing marketing programs for small wood products manufacturers. It examines the problems of using price as a dominant means for getting and attracting customers. The marketing of hardwood lumber to furniture producers is then used as an example. Data from 36 furniture lumber buyers is presented to illustrate...

  15. Emission of formaldehyde from furniture

    DEFF Research Database (Denmark)

    Andersen, Helle Vibeke; Klinke, Helene B.; Funch, Lis Winther

    The emission of formaldehyde from 20 pieces of furniture, representing a variety of types, was measured in climate chambers. Most tests show low emissions but certain scenarios of furnishing, including furniture with large surface areas in relation to room volume can emit formaldehyde resulting...

  16. The Classic Series: Television Institutions and Narrative Forms

    Directory of Open Access Journals (Sweden)

    Gianluigi Rossini

    2014-11-01

    Full Text Available In the late 40s and early 50s television was finally coming out of its experimental stage and becoming a national medium all around the world. During this period, in the United States, the tv series was only one of the emerging narrative forms, in competition especially with the live anthology drama, which at the time seemed to be the most interesting and televisual one. While in Europe the anthology form will continue to thrive until the late 70s, in the United States it will virtually disappear in less than a decade, superseded by the filmed episodic series. Aim of this essay is to describe how the episodic series became the most important narrative form in the US, and how the gradual definition of television’s governance and financing system during the 50s had a great influence on the development of its narrative forms.

  17. Ergonomic Based Design and Survey of Elementary School Furniture

    Science.gov (United States)

    Maheshwar; Jawalkar, Chandrashekhar S.

    2014-01-01

    This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

  18. Hemophagocytic lymphohistiocytosis: a case series of a Brazilian institution

    Directory of Open Access Journals (Sweden)

    Daniela Guimarães Rocha Ferreira

    2014-12-01

    Full Text Available Objective:To describe the clinical and laboratory presentation of hemophagocytic lymphohistiocytosis in children treated at a referral institution.Methods:A retrospective descriptive study was carried out of seven children diagnosed with hemophagocytic lymphohistiocytosis between 2010 and 2012. The criteria for diagnosis were those proposed by the Histiocyte Society. When indicated, immunochemotherapy was prescribed according to the HLH94 and HLH2004 protocols of the Histiocyte Society.Results:The patients' ages at diagnosis ranged from one month to nine years. All patients had splenomegaly, fever, anemia, thrombocytopenia, hyperferritinemia and hypertriglyceridemia. Bone marrow hemophagocytosis was detected in six patients. In six cases, infectious diseases triggered the syndrome. In two cases, associated with visceral leishmaniasis, remission was achieved after treatment of the underlying infection. Three patients, who had Epstein–Barr-related hemophagocytic lymphohistiocytosis, required treatment with immunochemotherapy. They are alive and in remission; one patient had symptoms of juvenile rheumatoid arthritis and another, who was suspected of having primary hemophagocytic lymphohistiocytosis, entered into remission after bone marrow transplantation. Two deaths (28.6% occurred in patients with suspected primary hemophagocytic lymphohistiocytosis; one whose clinical picture was triggered by cytomegalovirus infection did not respond to immunochemotherapy and the other died before any specific treatment was provided.Conclusion:As reported before, hemophagocytic lymphohistiocytosis has a multifaceted presentation with nonspecific signs and symptoms. In secondary forms, remission may be achieved by treating the underlying disease. In the primary forms, remission may be achieved with immunochemotherapy, but bone marrow transplantation is required for cure.

  19. 76 FR 54794 - Klaussner Furniture Industries, Inc., Plant #3, Asheboro, NC; Klaussner Furniture Industries, Inc...

    Science.gov (United States)

    2011-09-02

    ...,989B] Klaussner Furniture Industries, Inc., Plant 3, Asheboro, NC; Klaussner Furniture Industries, Inc... of Klaussner Furniture Industries, Inc., Milford, IA; Amended Certification Regarding Eligibility To... Industries, Inc., Plant 3, Asheboro, North Carolina (TA-W- 70,989) and Klaussner Furniture Industries, Inc...

  20. Furniture for a Technology-Infused School.

    Science.gov (United States)

    Fickes, Michael

    1998-01-01

    Discusses how one New Mexico school district weighed the choices in selecting and purchasing computer furniture for its classrooms. The purchasing process is described, as well as the types of, and reasons for, the furniture bought. (GR)

  1. Internationalisation of the Malaysian Wooden Furniture Industry

    OpenAIRE

    Zhao, LiXu

    2016-01-01

    Malaysia has a strong market share in wooden furniture and the witnessed fast growth made it a leading furniture exporter. Currently, Malaysia is the 8th largest furniture export country. As an export dominated industry, the wooden furniture industry occupies a significant position in the Malaysian economic development. Since the industry is a challenged and deteriorating in global competition, the research objective is to evaluate the present situation and find out strategies on how to impro...

  2. Learning From the Furniture Scale

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier; Kirkegaard, Poul Henning

    2018-01-01

    Given its proximity to the human body, the furniture scale holds a particular potential in grasping the fundamental aesthetic potential of architecture to address its inhabitants by means of spatial ‘gestures’. Likewise, it holds a technical germ in realizing this potential given its immediate...... tangibility allowing experimentation with the ‘principles’ of architectural construction. In present paper we explore this dual tectonic potential of the furniture scale as an epistemological foundation in architectural education. In this matter, we discuss the conduct of a master-level course where we...

  3. Applications of Mechatronics in Seating Furniture

    Directory of Open Access Journals (Sweden)

    Hynek Maňák

    2014-01-01

    Full Text Available Mechatronics is gradually being used in different fields of the production process and final products. In the field of home seating furniture, it has not been formally declared as such yet. The purpose of further development of seating furniture is to improve its ergonomic parameters, to improve user comfort in controlling and using seating furniture or to provide new additional functions of seating furniture. Application of mechatronic principles can be presumed within the framework of this development. An analysis of the current state of reclining seating furniture, which uses mechanical and electromechanical positioning mechanisms, is conducted in order to formulate possible fields of applying mechatronics. The analysis defines individual ergonomic parameters which are influenced in reclining of seating furniture. This analysis is used as a basis for formulating a hypothesis describing potential development fields of applying mechatronics in home seating furniture.

  4. Kesiapan Produsen Mebel di Jepara dalam Menghadapi Sertifikasi Ekolabel (Readiness in Jepara Furniture Manufacturers in Confront of Ecolabel Certification

    Directory of Open Access Journals (Sweden)

    Herry Purnomo

    2012-01-01

    Full Text Available Furniture is a big 4 of Indonesia’s export commodities with palm oil, textiles, and rubber outside the oil and gas.Value-added is enjoyed by tens of millions of people involved in the value chain. But, the business is experiencingsevere challenges to the issue of certification and forest products (green or certified furniture and the scarcityof wood. Certified furniture is intended for preservation of forest resources, the healthy processing of furnituremaking as well as improving the welfare of artisans. From the supply side of certified furniture, large producershave been prepared while small producers are not ready. From the demand side, domestic consumers only wantto pay less for certified furniture, while British and Norway consumers are 16% 7.5% respectively. The increasein willingness to pay is lower than the certified furniture prices increased between 6–30%., Certification can bedone by a third party accredited by the Tropical Forest Trust (TFT, Indonesian Ecolabel Institute (LEI, orForest Stewardship Council (FSC. When the increase in production costs are higher than the desire of consumersto pay, then the certified furniture becomes difficult to be realized. Need specific strategies to market certifiedfurniture. This article is a case study in Jepara furniture craftsmen who accounted for 10% of national exports.Keywords: furniture certified, certification, forests, supply, demand, Jepara

  5. Solid pseudopapillary neoplasm of the pancreas in pediatric patients: A case report and institutional case series

    Directory of Open Access Journals (Sweden)

    Justin B. Mahida

    2015-04-01

    Full Text Available Solid pseudopapillary neoplasm (SPN of the pancreas is a rare tumor presenting in adolescent and young adult females. A previously healthy 13 year-old female presented to our institution with abdominal pain and emesis. Imaging revealed a pancreatic cystic mass. Endoscopic ultrasound (EUS with fine needle biopsy suggested SPN. Pathologic evaluation following resection revealed immunohistochemical (IHC staining positive for β-catenin and α-1-antitrypsin despite extensive necrosis. We discuss this patient as well as our institutional series of SPN of the pancreas, describing the evaluation, management, and histopathology of this rare tumor.

  6. CEFTA Agreement and Opportunities for Wood Furniture Export of the Republic of Macedonia

    OpenAIRE

    Ilijana Petrovska; Živka Meloska; Krum Efremov; Kiril Postolov

    2016-01-01

    This paper is focused on business possibilities of CEFTA 2006 and its influence on export trend of wood furniture from the Republic of Macedonia. First, six categories of wood furniture export are analyzed such as: office furniture, kitchen furniture, bedroom furniture, living and dining room furniture, shop furniture and other furniture, presenting a positive trend in each category, except for living and dining room furniture. The total export of wood furniture shows a positive trend. The se...

  7. Ikea success in chinese furniture

    OpenAIRE

    Yihong, Li

    2007-01-01

    This thesis will focus on the market exploiting and development of IKEA in China, analysis the characteristics of Chinese market and the supply-demand of the IKEA products in China. It also analyze the main Chinese consumers’ behaviour and evaluating the furniture retail market in China. IKEA is a successful case to open the china market recent years. The main goal is to acquire this information in order to provide the overseas retailers with a good starting point for creating an effective bu...

  8. Optimization of inventory management in furniture manufacturing

    OpenAIRE

    Karkauskas, Justinas

    2017-01-01

    Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

  9. Consumer Behaviour Model on the Furniture Market

    Directory of Open Access Journals (Sweden)

    BEDNÁRIK, Éva

    2010-01-01

    Full Text Available This study introduces the furniture purchasing behaviour model. The study describes thebehaviour model and characteristics of decision making and the environmental factors affecting theindividuals besides emphasising the family character of furniture purchase. We introduce a chapterfrom the primary research verifying the model that analyses the validity of customer behaviour trendsdefined as elements of the impersonal environment on the furniture market. We touch on our lifestylebased segmentation model which is elaborated in our work in detail. The method of primary researchis quantitative, personal interview. While working out our research model we applied a method thatenables multi-level cross-section and cohort analyses. Our work has verified the need for trendresearches on the furniture market so we suggest the construction and the near-future launch of a trendresearch system consisting of several modules that reveals the specific factors on the furniture marketbesides verifying the validity of general behaviour trends.

  10. Contributions to the deployment of furniture in pole central region Tocantins

    Directory of Open Access Journals (Sweden)

    Jorge D’ Ambros

    2012-09-01

    Full Text Available This study was developed in the central region of Tocantins, for the identification and analysis of positive factors, weaknesses, opportunities and threats associated with the furniture supply chain in order to continue the formation of the regional furniture pole. To achieve this objective the methodology used was to listen to local actors and experts in the furniture segment. Seventy-five local actors among industry officials, academic institutions and university representatives were interviewed. They pointed out and analyzed the main points related to the economic, social, political and environmental contributions stemming from the creation of a pole in the region. The tool used was the SWOT Analysis associated with the Method of Judges, and then the variables were subjected to Principal Component Analysis - PCA. The SWOT Matrix proved to be adequate and effective to be used as diagnostic tool along with local actors. The examination of all the factors associated with local furniture production chain helped to understand the activity and indicate actions that affect this arrangement and that will bring economic, social and environmental benefits. According to the experts, the establishment of a furniture industry in the region will favor the employment and income creation, local and regional sustainable development, improvements in business management, raise the standard of quality and productivity of the local furniture industry and improve the quality of population standard of living.

  11. Factors influencing selection of office furniture by corporations and universities

    Science.gov (United States)

    R. Bruce Anderson

    1976-01-01

    Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

  12. The potential of Swedish furniture companies in Vietnam : How Vietnamese consumers perceive the product values of Swedish furniture

    OpenAIRE

    Dinh, Thi Phuong Lan; Karlsson, Jonas

    2012-01-01

    Introduction: Swedish furniture companies have been quite successful in many parts of the world recently, with IKEA being a famous example of that. Meanwhile, Vietnam has one of the fastest-growing economies in South East Asia. However, there has not been any Swedish furniture company established on the Vietnamese market so far. Therefore, it would be useful to see if the Vietnamese furniture consumers would appreciate Swedish furniture, in order to analyze whether Swedish furniture companies...

  13. DESAIN FURNITURE PADA LABORATORIUM PENDIDIKAN SENI RUPA

    Directory of Open Access Journals (Sweden)

    Agus Nursalim

    2016-04-01

    Full Text Available Permasalahan dalam penelitian ini adalah bagaimana membuat desain furniture yang memenuhi standard Antrophometry dan Ergonomy untuk Laboratorium Pendidikan Seni Rupa. Penelitian mengkaji tingkat kenyamanan furniture yang dipakai mahasiswa ketika sedang praktikum di studio. Penelitian dilakukan dengan tujuan untuk mengenai standard kenyamanan pembutan desain furniture yang akan digunakan mahasiswa sebagai perlengkapan praktikum pada laboratorium Pendidikan Seni. Bentuk Penelitian ini adalah penelitian diskriftif dengan metode kwalitatif. Temuan awal dalam penelitian ini adalah: dimensi ergonomics dan antropometrics mahasiswa pendidikan seni rupa memiliki nilai X(mean masih dibawah standard International (rekomendasi: Dreyfuss dalam buku “:The Measure of Man” dengan standard deviasi 1.96 dengan persentil 2.5 dan persentil 97.5 masih dalam batas normal (Data Tabel 4.7 dan Tabel 4.8: dimensi antropomotrics mahasiswa Angkatan 20122013. Centre of grafity atau moment of grafity mahasiswa ketika praktikum dengan duduk bertumpu pada pantat dan daerah kerja normal pada rentang 72.4-87.5. Sedangkan mahasiswa yang melakukan praktikum dengan berdiri bertumpu pada kaki dengan angular motion dan siku bebas bergerak (SBB pada rentang 183.92212.9 (data Tabel 4.2-Tabel 4.5:Data Ergonomi Mahasiswa Angkatan 2012-2013 sesuai dengan rekomendasi C.G. Drury dalam „Journal Apllied Ergonomics’. Vol.13, p.135. masih dalam tingkat nyaman. Hasil temuan ini kemudian digunakan sebagai pertimbangan awal dalam membuat desain Furniture pada studio Pendidikan Seni Rupa. Dengan demikian mahasiswa merasakan kenyamanan dalam melakukan praktikum di Studio Pendidikan Seni Rupa dengan menggunakan furniture yang ada. Untuk itu furniture harus didesain yang adjustable. Kenyamanan Furniture berpengaruh signifikan terhadap prestasi mahasiswa. Desain furniture yang dibuat Adjustable diantaranya etsel untuk melukis, Meja kerja studio dasar, Kursi kerja untuk melukis, meja putar pada

  14. Business plan for a Chinese furniture company

    OpenAIRE

    Wang, Haodi

    2016-01-01

    Abstract As a popular consumable, marketing costs of furniture are directly related to the benefits of manufacturing enterprise. Nowadays, most furniture manufacturing enterprises still adopt the traditional marketing strategy, which is single-directional, indirect and hierarchical strategy. It is not only difficult to meet the various and individual customers needs but also expensive for enterprises to exploit the market. Meanwhile, it prevents enterprises from following the market needs....

  15. Sales Application Online of Design Furniture on Mitra Karya Furniture

    Directory of Open Access Journals (Sweden)

    Maimunah

    2016-02-01

    Full Text Available The development of the business world characterized by the increasing number of established companies, both of which are engaged in industry, trade and services. The role of computers use in a company or organization is not a layman anymore but is a must. With the computerized system in the company or organization, all the processes ranging from data processing to making reports and another important documents can be neatly arranged so that can facilitate the process of data storage and retrieval. The sales processing system are running still manually. They are still using flyers to find consumers so that ineffective and inefficient. The sales program is the design research proposed of information systems. By utilizing the technology of computer and internet in order word is to try making the facility of sales better. By creating an online sales system to make the working process does not spread the time so that the sale can run well and be good service. The designs created by using Dreamweaver CS5 and using the MySQL for database so the database stored neatly. The main function of the online sales system is to assist in facilitating the resources to get the latest product sales at MitraKarsa Furniture, so that the customer can buy the latest products easily, anytime and anywhere they want to.

  16. OFFICE FURNITURE DESIGN SET: SINTEX (1965-1977

    Directory of Open Access Journals (Sweden)

    Aida Puente Toraño

    2013-07-01

    Full Text Available Litton Industries decided to establish one of its divisions in Northern Spain in 1965 called Litton-Cole. They chose Asturias to set up a factory intended to manufacture office furniture with a metallic component. The region had the potential to develop this kind of product due to its industrial base. It was easy to be provided with materials like steel, but above all a specialized workforce from Asturias’ Arms Industry. In the context of Spanish sixties José Antonio Menéndez Hevia was in charge of designing several banks and other public commercial establishments. Due to his connection with the Asturian banking sector, he had the opportunity to design office furniture set for Cole Steel. Cole Steel was the commercial name for the Asturian factory. Menéndez Hevia designed a very thorough set with almost twenty possible combinations that was commercialized under the name of Sintex. The series was successful on a national scale which was aimed at furnishing bank branch offices, but it was also exported to countries like Italy. Thousands of units were sold as part of one of the few Spanish design products manufactured in series at that time. The factory was closed in 1977, but in the general background of Spanish industrial design this series was forgotten, being part of our usual anonymous design history.

  17. Provincial Coordination and Inter-Institutional Collaboration in British Columbia's College, University College and Institute System. Monograph Series.

    Science.gov (United States)

    Gaber, Devron

    This document addresses a study that aimed to better understand the historical development of British Columbia community college, university college, and institute system with special attention given to recent changes in inter-institutional collaboration in relation to provincial coordination. The study also addresses centralization and…

  18. THE MARKETING SERVICES ON THE FURNITURE MARKET

    Directory of Open Access Journals (Sweden)

    Flaviu MEGHIŞAN

    2007-01-01

    Full Text Available The distribution of furniture has seen profound changes leading to accelerations of the dynamics of the competition environment, these changes being influenced, among other things, by the diversification of offer comprising new services. Today it seems essential to consider the distribution of furniture as an “industry that creates utility”. Indeed, the consumer is analyzed not only as a function of product characteristics, but as a set of utilities and advantages that distributions propose in their strategies of associated services. The services appear, in the same time, as variables which are applied by the distributor in his strategy to differentiate themselves and as utilities associated to the product, utilities which the consumer - as “problem-solver” - integrates in his decision making process. The consumer buys not just a simple product (furniture, but a global product which includes a sum of jointed attributes and utilities (proximity, product line, point of sale concept, information, warranty, etc.. This paper analyzes the services offer from the distribution of furniture as a method to solve the problems of furniture buyer. From this perspective the paper takes into consideration the various profiles of buying behavior, makes a critical analysis of the structure of services involved, defines a new structure of services based on the phases of buying behavior process.

  19. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    USER

    2010-05-24

    May 24, 2010 ... the Nigeria furniture industry though operating at abysmal performance has been ... placed the number of major wooden furniture industry in. *Corresponding author. ..... Demand complementarities, retail assortments and the ...

  20. Adjuvant radiotherapy after extrapleural pneumonectomy for mesothelioma. Prospective analysis of a multi-institutional series

    International Nuclear Information System (INIS)

    Tonoli, Sandro; Vitali, Paola; Scotti, Vieri; Bertoni, Filippo; Spiazzi, Luigi; Ghedi, Barbara; Buonamici, Fabrizio Banci; Marrazzo, Livia; Guidi, Gabriele; Meattini, Icro; Bastiani, Paolo; Amichetti, Maurizio; Schwarz, Marco; Magrini, Stefano Maria

    2011-01-01

    Background and purpose: To evaluate survival, locoregional control and toxicity in a series of 56 mesothelioma patients treated from May 2005 to May 2010 with post-operative radiotherapy after extrapleural pneumonectomy (EPP) in three Italian Institutions (Brescia, Florence, and Modena). Material and methods: Fifty-six patients treated with adjuvant radiotherapy (RT) after EPP were analyzed. Four patients were treated with 3DCRT, 50 with IMRT and two with helical tomotherapy. Forty-five to 50 Gy in 25 fractions were given to the affected hemithorax and to ipsilateral mediastinum, with a simultaneous integrated boost to the sites of microscopically involved margins up to 60 Gy in 20/56 cases. Results: Three year locoregional control (LRC), distant metastasis free (DMF), disease free (DF), disease specific (DSS) and overall survival (OS) rates are 90%, 66%, 57%, 62%, and 60%, respectively. Conclusion: Postoperative RT with modern techniques is an effective method to obtain excellent local control and cure rates in mesothelioma patients submitted to EPP.

  1. 75 FR 80528 - Wooden Bedroom Furniture From China

    Science.gov (United States)

    2010-12-22

    ... furniture from China would be likely to lead to continuation or recurrence of material injury to an industry... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1058 (Review)] Wooden Bedroom Furniture... Publication 4203 (December 2010), entitled Wooden Bedroom Furniture from China: Investigation No. 731-TA-1058...

  2. Factors influencing the, selection of state office furniture

    Science.gov (United States)

    R. Bruce Anderson; R. Bruce Anderson

    1973-01-01

    Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

  3. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    Evaluation of consumers' choice of wooden dining furniture in Southwestern Nigeria: A market strategy for furniture manufacturers and marketers. ... The study recommended increase use of durable Lesser Used Species (LUS) of trees for producing dining furniture and location of showrooms to target high income earners.

  4. The green marketing of modern office furniture

    Institute of Scientific and Technical Information of China (English)

    林凡青

    2015-01-01

    Green marketing is referred to as the mainstream of marketing in the 21st century, it mainly discusses the enterprise how to deal with the growing consumer demand for environmentally friendly products. Green marketing is an extension of the traditional marketing and the development, in the traditional marketing concept, through the coordination of enterprises, customers, competitors to gain maximum profits, and green marketing is more than the ecological environment factors included. Furniture enterprises through to carry out green marketing strategy, sales of green furniture products, the corresponding measures to guide the sustainable consumption and satisfy the consumer, to achieve economic interests, the interests of the consumers, the environment is unified.

  5. STRUCTURAL EFFECTS AND MUTATIONS CAUSED BY THE ECONOMIC CRISIS ON FURNITURE TRADE AT THE EUROPEAN UNION LEVEL

    Directory of Open Access Journals (Sweden)

    Radu Marginean

    2013-12-01

    Full Text Available he global economic crisis had most negative effects on the entire economic sphere and especially in what the consuming industry is concerned, which may be considered “luxurious”, the way in which we may talk about the furniture industry. Along times of economic crisis at social level, a decrease in financial power at microeconomic, individual level is felt. Under conditions of social decrease in buying capacity, the request for commercial furniture is in rapid fall and thus the industry as such suffers serious structural mutations. Analyzing a series of macroeconomic indices from the European furniture industry led to the result that during the late years there has been a positive trend within the furniture industry in matters of production, however, with concern to trading, the situation is more complicated. There is a behaviour difference in the furniture industry between emergent countries and EU developed states and based on the performed analysis, a SWOT analysis at sectorial level crystallized, in which we propose ways of growth in the European furniture industry.

  6. Prediction of fire growth on furniture using CFD

    Science.gov (United States)

    Pehrson, Richard David

    A fire growth calculation method has been developed that couples a computational fluid dynamics (CFD) model with bench scale cone calorimeter test data for predicting the rate of flame spread on compartment contents such as furniture. The commercial CFD code TASCflow has been applied to solve time averaged conservation equations using an algebraic multigrid solver with mass weighted skewed upstream differencing for advection. Closure models include k-e for turbulence, eddy breakup for combustion following a single step irreversible reaction with Arrhenius rate constant, finite difference radiation transfer, and conjugate heat transfer. Radiation properties are determined from concentrations of soot, CO2 and H2O using the narrow band model of Grosshandler and exponential wide band curve fit model of Modak. The growth in pyrolyzing area is predicted by treating flame spread as a series of piloted ignitions based on coupled gas-fluid boundary conditions. The mass loss rate from a given surface element follows the bench scale test data for input to the combustion prediction. The fire growth model has been tested against foam-fabric mattresses and chairs burned in the furniture calorimeter. In general, agreement between model and experiment for peak heat release rate (HRR), time to peak HRR, and total energy lost is within +/-20%. Used as a proxy for the flame spread velocity, the slope of the HRR curve predicted by model agreed with experiment within +/-20% for all but one case.

  7. Aspects of the furniture industry in Ireland

    OpenAIRE

    Heanue, Kevin

    2009-01-01

    This dissertation examines aspects of networking, industrial organisation, innovation, and industrial agglomeration in the Irish furniture manufacturing industry. With its focus on firm behaviour, industrial organisation and industrial structure the research is located within the tradition of industrial economics. Based on heterodox economic perspectives and utilising a variety of methods (albeit principally case study based), the dissertation provides new theoretical and empirical knowle...

  8. Furniture Rack Corrosion Coupon Surveillance - 2012 Update

    International Nuclear Information System (INIS)

    Mickalonis, J. I.; Murphy, T. R.; Berry, C. J.

    2012-01-01

    Under the L Basin corrosion surveillance program furniture rack coupons immersed for 14 years (FY2009 coupons) and 16 years (FY2011 coupons) were analyzed and the results trended with coupons exposed for shorter times. In addition, a section harvested from an actual furniture rack that was immersed for 14 years was analyzed for pitting in the weld and heat-affected-zone (HAZ) regions. The L Basin operations maintained very good water quality over the entire immersion period for these samples. These results for FY2009 and FY2011 coupons showed that the average pit depths for the 6061 and 6063 base metal are 1 and 2 mils, respectively, while those for the weld and HAZ are 3 and 4 mils, respectively. The results for the weld and HAZ regions are similar to coupons removed during the period of FY2003 to FY2007. These similarities indicate that the pit development occurred quickly followed by slow kinetics of increase in pit depth. For the actual furniture rack sample average pits of 5 and 2 mils were measured for the HAZ and weld, respectively. These results demonstrate that pitting corrosion of the aluminum furniture racks used to support the spent fuel occurs in waters of good quality. The corrosion kinetics or pit depth growth rate is much less that 1 mil/year, and would not impact long-term use of this material system for fuel storage racks in L Basin if good water quality is maintained

  9. Occupational injuries in the Finnish furniture industry.

    Science.gov (United States)

    Aaltonen, M V

    1996-06-01

    The purpose of the study was to determine the types of occupational injuries that occur in the Finnish furniture industry and to see whether they differ as regards production type and company size. During a one-year registration period accident events, the actual and potential severity of the injuries, the causes of the accidents, and the measures needed to prevent such accidents were examined in 18 Finnish furniture factories of different types. An analysis of covariance determined the variables affecting the actual and potential severity of the injuries. The 214 accidents registered were lost-time injuries; two of them resulted in slight partial loss of fingertips. The disabling injury rate was 14.4 per 100 workers per year. Wooden furniture production and kitchen cupboard production in large companies had the highest rate. Accidents involving machines comprised half of the material. Saws were the most common machine type. Forty-two percent of the injuries could have been more severe; one injury could have been fatal. The injured persons and their foremen identified the causal factors of the accidents and the needed safety countermeasures well. Sixty-six percent of the causes and 65% of the safety countermeasures were associated with the actions of the workers and the workplace procedures. Nevertheless, only 6% of the identified safety countermeasures were put into force. It was estimated that, in 1987, 2000 on-site accidents leading to at least first-aid at some health care center occurred in the Finnish furniture industry. Special efforts should be taken to improve safety in furniture production in Finland.

  10. Impact of Imported Chinese Furniture on The Local Furniture Sector in Arusha City, Tanzania: Focusing on the Strategies of Furniture-Makers for Using Indigenous Timber Species

    OpenAIRE

    OGAWA, Sayaka

    2018-01-01

    The aim of this paper is to elucidate the strategies used by Tanzanian furnituremakers to deal with price competition from Chinese imported furniture by examining the changes in the local use of timber, which is becoming scarce due to destructive harvesting. Chinese furniture flowing into Tanzania is not only of a fashionable design but it is also cheap because it is constructed from low-quality timber and alternative materials. Small-scale Tanzanian furniture-makers operate their business ba...

  11. Previsão e séries temporais para tomada de decisão empresarial em uma indústria moveleira da região de Criciúma–SC = A study of forecasting and time series for business decision making in a furniture industry in Criciúma-SC

    Directory of Open Access Journals (Sweden)

    Fernanda Cristina Barbosa Pereira Queiroz

    2012-07-01

    Full Text Available Uma previsão adequada deve dar suporte a uma decisão minimizadora de risco por parte dos tomadores de decisão, sendo essencial para o planejamento individual e organizacional de agentes econômicos. Neste sentido, o objetivo deste artigo é realizar um estudo sobre previsão e séries temporais para tomada de decisão empresarial em uma indústria moveleira da região de Criciúma–SC. A metodologia utilizada fundamenta-se na construção de modelos univariados de previsão de preços, com base em dados de séries temporais. O estudo é classificado como exploratório, bibliográfico e um estudo de caso com dados quantitativos. Há uma grande variedade de modelos aplicáveis a estudos desta natureza. Para fins desta pesquisa, optou-se por selecionar o método linear Holt e Holt-Winters e o modelo ARIMA (Auto Regressive Integrate Moving Average. Procurou-se, neste sentido, apresentar os diferentes modelos disponíveis na literatura, objetivando estimar a demanda por móveis para banheiro e projetar vendas futuras. Os resultados mostraram que o modelo ARIMA (Auto Regressive Integrate Moving Average não se mostrou eficiente no caso analisado, devido ao número pequeno de dados, o que impossibilitou uma análise da sazonalidade, sugerindo-se que a empresa utilize o método de Holt, a fim de estimar o número de produtos a ser vendido e que, à medida que os novos produtos sejam vendidos, os demais modelos sejam testados novamente, uma vez que a incorporação de novos dados irá permitir confirmar a existência ou não da sazonalidade. An adequate forecast should give support to minimize risk decisions by the decision makers, being essential for individual and organizational planning of economic agents. In this sense, the purpose of this paper is to conduct a study about forecast and time series for business decision-making in a furniture industry in the region of Criciúma, SC. The methodology was based on the construction of univariate models

  12. Transitioning Wood Furniture Products towards Sustainability

    OpenAIRE

    Lu, Lei; Zhang, WeiGuang; Zhang, WeiQing

    2008-01-01

    Wood Furniture Products (WFPs) play a significant role in both the global economy and the transition of society towards sustainability. This paper begins with a brief description of the industry and highlights the current challenges and compelling measures of WFPs from a systems perspective through the lens of the Framework for Strategic Sustainable Development (FSSD) and by applying backcasting from sustainability principles (SPs). An examination of the challenges and opportunities of WFPs i...

  13. A producer survey on Turkish furniture industry

    OpenAIRE

    Öğün, Emir Polat

    1996-01-01

    Ankara : The Department of Management and Graduate School of Business Administration of Bilkent Univ., 1996. Thesis (Master's) -- Bilkent University, 1996. Includes bibliographical references leaves 79-80. Turkish furniture industry has been growing steadily since the liberalization of Turkish economy in early 1980’s. However, the industry faces some technological and economical problems which affects the competitiveness of the firms in the global market. The major problems ...

  14. Realization of FRC interior and exterior furniture

    Science.gov (United States)

    Šonka, Š.; Frantová, M.; Štemberk, P.; Havrda, J.; Janouch, P.

    2017-09-01

    This article deals with the implementation of fibre reinforced concrete for interior and exterior furniture. The use of fibre reinforced concrete for non-traditional and small structures brings some specifics in design and realization. These are, in particular, the design of a suitable mixture, the choice of the shape of the structure in relation to the technological possibilities of realization, the static effects and finally the actual production of the element.

  15. Fungi in carpeting and furniture dust.

    Science.gov (United States)

    Schober, G

    1991-11-01

    The qualitative and quantitative species composition of fungi in carpets and upholstered furniture dust found in the living-rooms of nine Dutch dwellings was examined in a pilot study. Numbers of spores of xerophilic fungi did not differ in dust removed from carpeting and upholstery. Spores of hydrophilic species were found to be more predominant on floors (P less than 0.05), whereas meso-hygrophilic spores, largely dominated by allergologically relevant Penicillium species, were significantly more abundant in dust taken from regularly used furniture (P less than 0.05). Our results indicate that growth conditions for fungi in the micro-habitats of furniture differ from those in carpeting. No statistically significant differences in number of viable spores have been found in samples taken from ground-floor level compared with those taken from 1st to 3rd floor level of dwellings. From this study, the need for a micro-topographic analysis of the fungal flora in the human environment has become apparent. Efficient allergological home sanitation in dwellings of allergic patients requires detailed data about the colonization of the various micro-habitats by allergenic fungi.

  16. METHODS FOR DETERMINING THE AESTHETIC APPEAL OF FURNITURE

    Directory of Open Access Journals (Sweden)

    Mária Réka ANTAL

    2016-03-01

    Full Text Available The world of furniture market is getting more and more complex than it was before. In recent years the habits of buying furniture have changed. The fabrication of individual pieces of furniture is increasingly coming to the front. A personal contact is being established between the customer and the furniture, which is a relationship of one product to one customer. In order to satisfy the individual demands, higher prices and higher quality are needed. The competition is beginning at the market and emotion plays an important role in it. Therefore, functionality and aesthetic functions, determinative forms, fashionable style play a very important role in furniture design and production. Some methods are presented such as RMQD or FMEA used for determining aesthetics of furniture.

  17. Dinamika Budaya Material pada Desain Furnitur Kayu di Indonesia

    Directory of Open Access Journals (Sweden)

    Arianti Ayu Puspita Ayu Puspita

    2016-09-01

    ABSTRAK   Perubahan kondisi ekonomi hingga abad ke-21, dan meningkatnya kebutuhan furnitur baik dari luar maupun dalam negeri, kemudian perkembangan ilmu desain di Indone sia, secara tidak langsung berhubungan de ngan permasalahan ekologi. Ketersediaan sumber daya alam seperti kayu, semakin berkurang sehingga mendorong industri furnitur di Indonesia untuk menggunakan alternatif berbagai macam kayu solid, kayu olahan hingga kayu limbah. Dari waktu ke waktu, perubahan kondisi sosial, ekonomi, dan gaya hidup, turut berperan pada kemunculan bentuk-bentuk furnitur baru di Indonesia. Pada penelitian ini, transformasi   kebutuhan material kayu pada furnitur akan dikaitkan dengan dinamika sosial budaya yang terjadi dari abad ke-18 hingga abad ke-21 di Indonesia. Tansformasi  akan dilihat berdasarkan perubahan teori Material Cultural Studies, yang kemudian akan menghasilkan kesimpulan bahwa konsep ekologi berperan penting dalam perkembangan desain furnitur kayu di Indonesia.   Kata kunci: transformasi budaya, furnitur, kayu, Indonesia, ekologi

  18. Furniture Industry Assessment: Trade Policy and Market Opportunities

    OpenAIRE

    Lord, Montague J.

    1999-01-01

    The report analyzes the international competitiveness of furniture industry based on calculations of effective rates of protection and trade indicators. Furniture manufacturing remains one of the most highly protected industries in Egypt. Although the nominal rate of protection (NRP) for that industry was lowered from 50 percent in 1997 to 40 percent, its rate remains the fourth highest of all manufacturing categories. The effective rate of protection (ERP) for the wood furniture industry is ...

  19. The Influence of Furniture on Air Velocity in a Room

    DEFF Research Database (Denmark)

    Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

    Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room. Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set......-up is simulated with one of the inlets where a volume resistance represents the furniture....

  20. Aim for Wow-ability when Selecting Student Center Furniture.

    Science.gov (United States)

    Payne, Jill M.

    2003-01-01

    Advises colleges to keep in mind several qualities when purchasing furniture for student centers: durability, cleanability, repairability, flexibility, storability, credibility, sustainability, comfort, affordability, and "wowability." (EV)

  1. Taking the Reins: Institutional Transformation in Higher Education. The ACE Series on Higher Education

    Science.gov (United States)

    Eckel, Peter D.; Kezar, Adrianna

    2011-01-01

    Peter Eckel and Adrianna Kezar have written this book to offer insight to campus leaders who face transformational change--to help them mount a proactive, rather than a reactive, process to effect transformation. They believe that most institutional leaders have little to no experience with implementing large-scale change and lack a solid…

  2. Maternal Filicide among Women Admitted to Forensic Psychiatric Institutions in Malaysia: Case Series.

    Science.gov (United States)

    Razali, S; Salleh, R M; Yahya, B; Ahmad, S H

    2015-06-01

    To examine the characteristics of maternal filicide and describe the adverse life events experienced by women who have committed filicide and been hospitalised in forensic psychiatric institutions in Malaysia. Registration records from 2000 through 2012 of female patients from 2 main forensic psychiatric institutions in Malaysia were reviewed. The medical records of patients who had committed maternal filicide were selected and descriptively evaluated. A total of 18 cases of maternal filicide were identified. Family dysfunction that presented with marital discord, domestic violence, or husband with substance abuse was the main stress experienced by the women. Three social circumstances, including an adolescent who became a victim of date rape; immigrants who experienced sexual abuse; and filicide-suicide precipitated by financial difficulties were highlighted. Women who committed filicide had experienced various difficulties in their life. The presence of such life events might alert mental health professionals to investigate the possibility of filicide among their patients.

  3. Institutional Experience in the Management of Hilar Liver Obstruction- A Series of 13 Cases.

    Science.gov (United States)

    Pathanki, Adithya Malolan; Naragund, Adithya V; Mahadevappa, Basant

    2016-12-01

    Neoplastic hilar obstruction to the liver outflow presents a unique challenge to the surgeon, wherein, the balance between a curative and possibly larger resection has to be achieved against a more conservative local resection. These are often technically demanding and have thus, far produced equivocal outcomes on both ends. The present case series is on 13 patients who presented with hilar obstruction. They all underwent resections with possible curative intent. The focus of our review is on the technical nuances and the strategies we used, intra- and peri-operatively to make resections possible in these patients, who at first look were deemed inoperable. Among the 13, 10 had hilar cholangiocarcinoma (CCA) while the others had a more benign diagnosis e.g., Hydatid disease. We did not encounter any peri-operative mortality in our series. Two of our patients had to be re-explored for intra-abdominal complications. Among the 13, we encountered two deaths. The rest of the patients are still on follow-up as of April 2016. Hilar CCA continue to be rare and challenging tumours for the Hepato Pancreato Biliary (HPB) surgeon to manage. Outlooks are currently changing as we try to resect bigger and more complicated hilar liver tumours with better results.

  4. The Impact of Clustering on the Innovativeness Of Furniture Industry

    Directory of Open Access Journals (Sweden)

    Grzegorzewska Emilia

    2014-06-01

    Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

  5. The Business of: School Furniture: Innovative Designs for Tomorrow's Learning

    Science.gov (United States)

    Lacey, Kylie

    2013-01-01

    As instruction shifts to a learner-centric, individualized approach with a focus on small group activities, heavy furniture that small hands cannot move on their own have become less desirable. The most popular pieces are lightweight, portable, and colorful. The Smith System furniture company encourages schools to select chairs and desks in their…

  6. Furniture Industry in Kenya : Situational Analysis and Strategy

    OpenAIRE

    Creapo Oy; World Bank Group

    2015-01-01

    The Government of Kenya recognizes that the performance of the furniture sector is crucial both to employment and growth in the country. The Ministry of Industrialization and Enterprise Development (MOIED) therefore requested an analysis of both the furniture and timber sectors, in order to understand their current state of development, their main constraints, and the interventions necessa...

  7. [Exposure to hazardous chemical substances in furniture industry].

    Science.gov (United States)

    Pośniak, Małgorzata; Kowalska, Joanna; Makhniashvili, Ivan

    2005-01-01

    The aim of the study was to assess the exposure to organic solvents in plants of the furniture industry. Studies were conducted in five furniture plants. Hazardous chemicals present in the air at workposts were determined by capillary gas chromatography with mass spectrometry and flame ionization detection. The analysis of air samples collected at the workposts allowed to identify the following chemicals occurring during varnishing and cleaning of furniture surface elements: acetone, butan-2-one, ethyl, isobutyl and methoxypropyl acetate, 4-methylpentan-2-on, toluene, ethylbenzene and xylenes. Indices characteristic of combined exposure ranged from 0.13 to 1.67 and exceeded the limit value at 21% of workposts. The results of the study indicate that chemicals present at representative workposts during the furniture production are harmful to health of workers, especially those involved in varnishing and cleaning of furniture elements.

  8. Analysis of black japanned furniture by XRF

    Energy Technology Data Exchange (ETDEWEB)

    Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P., E-mail: valter.felix@ifrj.edu.br, E-mail: renato.freitas@ifrj.edu.br, E-mail: annalecastro@hotmail.com [Instituto Federal do Rio de Janeiro (LISCOMP/IFRJ-CPAR), Paracambi, RJ (Brazil). Lab. de Instrumentação e Simulação Computacional; Pereira, Marcelo O.; Carvalho, Cristiano S.; Silva, Fabricio L., E-mail: marcelocefetrj@gmail.com [Centro Federal de Educação Tecnológica Celso Suckow da Fonseca (CEFET), Nova Iguaçu, RJ (Brazil)

    2017-07-01

    Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

  9. Does Saudi school furniture meet ergonomics requirements?

    Science.gov (United States)

    Ramadan, Mohamed Zaki

    2011-01-01

    The goal of this research was to study the effect of adjustable imported desk and chair combinations available in the market on student performance. Six sets of chairs and tables within three different activities (reading, writing, and looking to the blackboard) were the independent variables. Evaluation of back force at 5th lumbar vertebrae and the 1st sacrum (L5/S1), subjective measures of discomfort, and the mismatch between student body dimension and classroom furniture analysis were measured. A total of 124 young male students (first through sixth-grade) participated in this experiment. The results revealed too low or too high chair and table heights relative to the students' body dimensions increased the stresses acting at L5/S1 as well as discomfort ratings. This study indicated there was a high level of body mismatch in desk-chair combinations even with the adjustable imported furniture available in the local market. Anthropometric data of Saudi students should be collected from different regions in the Kingdom and then design and development of desk-chair combinations could follow the development of a standard procedure to adapt to the needs of Saudi school children.

  10. Analysis of black japanned furniture by XRF

    International Nuclear Information System (INIS)

    Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P.

    2017-01-01

    Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

  11. The wood household furniture and kitchen cabinet industries: a contrast in fortune

    Science.gov (United States)

    William G. Luppold; Matthew S. Bumgardner

    2009-01-01

    In 1977, the value of wood household furniture shipments from domestic manufacturers exceeded kitchen cabinet shipments by 170 percent; conversely, in 2006 shipments of cabinets exceeded shipments of furniture by 78 percent. The most apparent reason for the decrease in domestic furniture shipments is the increase in furniture imports, whereas cabinet demand has...

  12. Knowledge as a Critical Resource in Innovation among Small Furniture Companies in Indonesia: An Exploration

    Directory of Open Access Journals (Sweden)

    Marina van Geenhuizen

    2005-09-01

    Full Text Available The furniture industry makes a significant contribution to the Indonesian economy but is exposed to an intensifying competitive environment and to emerging shortages of raw material. These circumstances have prompted small furniture manufacturers in the district of Jepara to undertake several types of innovation. It appears that of all first ranked innovations, product innovation is the largest category. In the overall pattern of innovations, market innovation and logistics innovation are also important, a situation that can be explained by the typical character and current circumstances of the furniture industry in this area. The innovation process concerned mainly relies on traditional knowledge sources, namely in-house learning-by-doing and experimentation, and buyers (customers. However, the manufacturers show willingness to use other knowledge sources in the near future, particularly more formal and globally oriented ones, such as exhibitions, research institutions, and the Internet. What tends to hamper such progress is that the manufacturers’ capability to access these knowledge sources is limited by financial obstacles and to a smaller extent by complexity and language obstacles. The paper concludes with a few policy recommendations and potential directions of future research. One of the policy recommendations aims at a combination of the traditional way of knowledge generation through in-house learning-by-doing and experimentation with knowledge from modern and formal sources.

  13. Proxemic Transitions: Designing Shape-Changing Furniture for Informal Meetings

    DEFF Research Database (Denmark)

    Grønbæk, Jens Emil; Korsgaard, Henrik; Petersen, Marianne Graves

    2017-01-01

    Shape-changing interfaces is an emerging field in HCI that explores the qualities of physically dynamic artifacts. At furniture-scale such dynamic artifacts have the potential of changing the ways we collaborate and engage with spaces. In- formed by theories of proxemics, empirical studies...... of informal meetings and design work with shape-changing furniture, we develop the notion of proxemic transitions. We present three design aspects of proxemic transitions: transition speed, step- wise reconfiguration, and situational flexibility. The design aspects focus on how to balance between physical...... between a table and a board surface. These contributions outline important aspects to consider when designing shape-changing furniture....

  14. Use of lasers in the furniture industry

    Science.gov (United States)

    Wieloch, Grzegorz; Pohl, Piotr

    1995-03-01

    One of the ways of using laser in industry is its usage in loss treatment of wood and composite wood products. In the furniture industry the above mentioned machining is used in such technological processes in which tool machining (sawing, molding) is not economical or even possible. These processes are mainly curvilinear cutting of layer materials like veneers, plywood, and face layers and thicker materials like particleboards, fiberboards, and lumber- core panels. Wide usage has also been achieved in heat treatment in wood for decoration. It can be calcinating designs, engraving them, blackening of parts of surfaces, or changing of anatomic characteristics of wood tissue. Nevertheless laser usage in recliner cutting seems at present causeless.

  15. Leaching of TCIPP from furniture foam is rapid and substantial.

    Science.gov (United States)

    Stubbings, William A; Harrad, Stuart

    2018-02-01

    A series of laboratory experiments were conducted, in which waste furniture polyurethane foam samples containing tris (1-chloro-2-propyl) phosphate (TCIPP) were contacted with a range of leaching fluids, formulated to simulate the composition of landfill leachate. Leaching was examined under a number of different scenarios, such as: dissolved humic matter concentration, pH, and temperature, as well as the effect of agitation, and waste:leaching fluid contact duration. In addition to single batch (no replenishment of leaching fluid), serial batch (draining of leachate and replenishment with fresh leaching fluid at various time intervals) experiments were conducted. Leaching of TCIPP from PUF appears to be a first order process. Concentrations of TCIPP in leachate generated by the experiments in this study ranged from 13 mg L -1 to 130 mg L -1 . In serial batch leaching experiments, >95% of TCIPP was depleted from PUF after 168 h total contact with leaching fluid. Our experiments indicate leaching is potentially a very significant pathway of TCIPP emissions to the environment. Copyright © 2017. Published by Elsevier Ltd.

  16. Reconstruction of Furniture Production as Potential and Reputable Intellectual Property Rights (IPR Creative Design Model

    Directory of Open Access Journals (Sweden)

    husen hendriyana

    2017-10-01

    Full Text Available Along with recent rapid development of science, technology, art and culture, through research institutions from the central to the local level, the government seriously activates enhancement and protection of the intellectual products of the nation. Such as protection of intellectual property rights against irresponsible plagiarism. This is due to that the appearance, process, or invention steps of the creative furniture designer in the society or in the academic environment have the potential and the opportunity to be registered as Intellectual Properties (IP or gain Intellectual Property Rights (IPR. Besides aiming to lift up the state or institutions achievement and attainment of intellectual property rights internationally, the added value also can be developed in the direction of economic upgrade. Research on furniture products designs have been numerously carried out with various objects and cases, yet the diversity of the subject character and creative processes still have not well defined so they enrich the model of creative process design. This study aims to identify, classify and formulate a potential furniture design model of creative process and IPR standard, through methods PAR. The results of this study are (1 prototype of furniture design products, (2 the creative process model and the construction methods process of furniture design with a concept or a specific theme; (3 Registration of IPR; (4 Scientific manuscript. Seiring dengan perkembangan ilmu pengetahuan, teknologi, seni dan budaya yang marak dewasa ini, melalui lembaga penelitian dari tingkat pusat sampai ketingkat daerah, pemerintah semakin serius menggalangkan peningkatan dan perlindungan terhadap produk intelektual anak bangsa. Salah satu contoh di antaranya adalah perlindungan terhadap hak kekayaan intelektual dari perilaku plagiarism yang tidak bertanggung jawab. Hal ini tiada lain bahwa, bentuk, proses, maupun invention steps dari para pelaku kreatif desain mebel

  17. The structural analysis of small and medium size furniture ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-17

    Dec 17, 2008 ... furniture enterprises in Turkey based on production, capacity use and .... has important structural, organizational and technological deficiencies, but it has .... the equipment they need change in compliance with the order they ...

  18. Anthropometric measurements for ergonomic design of students’ furniture in India

    Directory of Open Access Journals (Sweden)

    Ismail Wilson Taifa

    2017-02-01

    Full Text Available This paper presents anthropometric measurements regarding engineering students in India. Health survey (ergonomic assessment was carried out to know the health status of all students who have been using poorly designed furniture. The data were measured with the help of various tools. After data collection and analysis, authors came up with exhaustive dimensions for designing adjustable classrooms furniture. Dimensions recommended include; bench surface height, bench depth and width, back rest width and height, backrest angle, desk height, desk depth, width, and desk angle. Therefore, an implementation of these data will help to create comfortability, safety, well-being, suitability, reduce Musculoskeletal disorders, and improve performance of students in terms of attentiveness. Also, it is highly recommended to consider requirements from students in designing classrooms furniture and conduct seminar or workshop to educate students regarding the negative impact towards adapting poor posture in the long usage of classrooms furniture.

  19. About furniture. Before and after Ptolomaeus Philadelphos' pavilion

    Directory of Open Access Journals (Sweden)

    Elena Calandra

    2010-07-01

    Full Text Available The furniture is of primary importance towards the canopies definition, more than the architectonic structure: they  contribute, in fact, in creating and organizing the spaces, so that there is almost no distinction between furniture and structure, as it is possible to observe in the ancient sources of different periods (Herodotus, Euripides, Julius Caesar, Plutarchus, Athenaeus: the pavilions of Xerxes at Plataia, of Ion at Delphi, of Alexander after the Issa battle and at Susa, of Pompey at Pharsalos, as well as the Ptolomaeus's canopy at Alexandria. At the same time, the furniture language is studied, signifying the power and the force of the sovereign through the luxurious materials and surprising the spectators.      At the end, some hypotheses on the final destination of the furniture, after dismantling the Ptolomaeus' canopy, equiped for one year.

  20. Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

    Directory of Open Access Journals (Sweden)

    Aries Wicaksono

    2014-11-01

    Full Text Available Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS. PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it is important for information systems running properly.This research aimed to audit the general control and applications control on the expenditure cycle accounting information system at PT. Lagio Furniture. This type of audit is audit around the computer. And then also collecting data through observation and interviews with relevant parties. Results of thereserarch is the expenditure cycle accounting information system at PT. Lagio Furniture was good. But there is still need to be improved in the control plan security, operational management control, and control inputs.

  1. Intensity of rivalry in Czech furniture production industry

    OpenAIRE

    Lucie Špačková; Pavel Žufan

    2012-01-01

    The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local) demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of ...

  2. Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

    OpenAIRE

    Wicaksono, Aries

    2014-01-01

    Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS). PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it...

  3. The Investigation of Soft Furniture Upholstery Deformational Behaviour

    OpenAIRE

    Donata ZUBAUSKIENE; Eugenija STRAZDIENE; Virginijus URBELIS; Virginija SACEVICIENE

    2012-01-01

    Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into accoun...

  4. A new approach of the design process for replacing wooden parts of furniture

    Directory of Open Access Journals (Sweden)

    Ciupan Cornel

    2017-01-01

    Full Text Available Based on different design processes for innovative products, the paper presents a new approach of the process. The new method studies the problem of replacing the wooden components of the resistance structure of furniture with other materials. This is a reverse engineering process, that starts with the entire component, following a series of steps to the part drawings, ready for manufacturing. The method was validated by redesigning some parts of the upholstered products manufactured by TAPARO Company, by replacing the wooden parts of the resistance structure of sofas with composite material.

  5. A comparative study of three different kinds of school furniture.

    Science.gov (United States)

    Aagaard, Jens; Storr-Paulsen, Annette

    1995-05-01

    Several studies indicate that the ISO standards for school furniture seem to be inappropriate, and there is increasing evidence that the inclination of the seat should be forward and that it should be possible to adjust the table-top to a certain non-horizontal angle. However, these studies have predominantly used objective measurement methods on adult subjects for short-term experiments in rather artificial surroundings. By means of structured interviews registering the school children's perception of ergonomic comfort, the present study has compared three types of school furniture-the original ISO-standard type, and two different new types characterized by forward slanting seats and tiltable desk-tops, the main difference between the two being approximately 15 cm in the height of the chair as well as the table. The study showed that the highest of the two tilting types was perceived to be significantly better than the two others in terms of table height, chair height, reading position, back-rest, and global assessment. Likewise, the feature of a tiltable table-top was considered overwhelmingly positive independently of the height of the furniture. It is recommended that school authorities, producers of school furniture, and relevant medical personnel consider these results for alternative designs of school furniture. It should be kept in mind, however, that school furniture is only one among many factors in the multifactorial field of the back health of school children.

  6. Physical and chemical evaluation of furniture waste briquettes.

    Science.gov (United States)

    Moreno, Ana Isabel; Font, Rafael; Conesa, Juan A

    2016-03-01

    Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified material by co-densification of furniture wood waste and polyurethane foam waste. Densification of furniture wood and the co-densification of furniture wood waste with polyurethane foam have been studied. On the one hand, the parameters that have an effect on the quality of the furniture waste briquettes have been analysed, i.e., moisture content, compaction pressure, presence of lignin, etc. The maximum weight percentage of polyurethane foam that can be added with furniture wood waste to obtain durable briquettes and the optimal moisture were determined. On the other hand, some parameters were analysed in order to evaluate the possible effect on the combustion. The chemical composition of waste wood was compared with untreated wood biomass; the higher nitrogen content and the concentration of some metals were the most important differences, with a significant difference of Ti content. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Optimization of a furniture factory layout

    Directory of Open Access Journals (Sweden)

    Tadej Kanduč

    2015-03-01

    Full Text Available This paper deals with the problem of optimizing a factory floor layout in a Slovenian furniture factory. First, the current state of the manufacturing system is analyzed by constructing a discrete event simulation (DES model that reflects the manufacturing processes. The company produces over 10,000 different products, and their manufacturing processes include approximately 30,000 subprocesses. Therefore, manually constructing a model to include every subprocess is not feasible. To overcome this problem, a method for automated model construction was developed to construct a DES model based on a selection of manufacturing orders and relevant subprocesses. The obtained simulation model provided insight into the manufacturing processes and enable easy modification of model parameters for optimizing the manufacturing processes. Finally, the optimization problem was solved: the total distance the products had to traverse between machines was minimized by devising an optimal machine layout. With the introduction of certain simplifications, the problem was best described as a quadratic assignment problem. A novel heuristic method based on force-directed graph drawing algorithms was developed. Optimizing the floor layout resulted in a significant reduction of total travel distance for the products.

  8. Identifying the customer satisfaction factors in furniture market

    Directory of Open Access Journals (Sweden)

    Majid Azizi

    2017-05-01

    Full Text Available Purpose – the purpose of this research is to identify the influential factors on customer satisfaction in the Iranian furniture market in order to get acquainted with the fundamental items for planning future sales programs with the purposes of extolling competitive advantages. Design/methodology/approach – A commixture of 6 items and 31 factors were educed from interviewing with 20 experts in furniture designing and manufacturing industry. The collected data from customer need indexes in previous research were also used. Findings – results showed that such factors as economic factors weighting 0.32, product specifications weighting 0.21 and credibility weighting 0.19 were the most important indexes and price weighting 0.195, fame weighting 0.131, quality, durability and resistance weighting 0.116, paying conditions weighting 0.095, designing and decorating in virtual softwares before ordering weighting 0.074, updatedness weighting 0.064 and interaction approach with the weight of 0.42 were the most considerable influential sub-indexes on the satisfaction of the Iranian furniture market customers. Research limitations/implications – by the enhancement of competition throughout the world markets and the inevitable presence of Iran in it, the market activists’ concentration should shift towards paying comprehensive attention to desires and needs of furniture market customers. Practical implications – some important issues on planning suitable manufacturing and marketing programs in furniture market are introduce so that the activists be aware of considering the growing knowledge and awareness of end-users which increases the pressure on the manufacturer side. There are also some solutions in terms of internal and external organizational factors with regard to the complex nature of competitive environment in furniture market. Originality/value – the paper provides an examination of effective factors on customer satisfaction with a

  9. The Investigation of Soft Furniture Upholstery Deformational Behaviour

    Directory of Open Access Journals (Sweden)

    Donata ZUBAUSKIENE

    2012-12-01

    Full Text Available Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into account the differences of applied materials mechanical properties. Otherwise external view and quality of upholstery may be unacceptable due to obvious visual material excess on soft furniture surfaces, which is called pull-on ease. The aim of this investigation was to determine the dependencies between three different levels of soft furniture upholstery pre-tension and corresponding values of pull-on ease. New testing method presented in this study allows defining soft furniture upholstery deformational behaviour and its regularities in respect to the initial dimensions of upholstery patterns.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3099

  10. Anthropometric evaluation of the Creches children furniture in Turkey.

    Science.gov (United States)

    Barli, Onder; Sari, Reyhan Midilli; Elmali, Derya; Aydintan, Erkan

    2006-12-01

    The dimensions of the living and working space and buildings, the types of material and different riggings should be designed to conform to the users' anthropometric measures. The first requirement to design on ergonomic system is to measure the human being who will work and live in that system. Because of this, anthropometric measures are the most frequently used ergonomic data during the design process. In this research paper, we attempt to organize a new data base of anthropometric data to use in the design of children's equipment and furniture used in crèches. A starting point for research on the proper dimensions of creche furniture is to investigate how the dimensions of furniture reflect the body dimensions and the functional needs of the children using furniture. The anthropometric data of 3, 4 and 5 year-old-children in crèches was used. We report the results of the measurements of 18 anthropometric characteristics of children which constitute a set of basic data for the design of functional spaces and furniture.

  11. Sentinel node status prediction by four statistical models: results from a large bi-institutional series (n = 1132).

    Science.gov (United States)

    Mocellin, Simone; Thompson, John F; Pasquali, Sandro; Montesco, Maria C; Pilati, Pierluigi; Nitti, Donato; Saw, Robyn P; Scolyer, Richard A; Stretch, Jonathan R; Rossi, Carlo R

    2009-12-01

    To improve selection for sentinel node (SN) biopsy (SNB) in patients with cutaneous melanoma using statistical models predicting SN status. About 80% of patients currently undergoing SNB are node negative. In the absence of conclusive evidence of a SNBassociated survival benefit, these patients may be over-treated. Here, we tested the efficiency of 4 different models in predicting SN status. The clinicopathologic data (age, gender, tumor thickness, Clark level, regression, ulceration, histologic subtype, and mitotic index) of 1132 melanoma patients who had undergone SNB at institutions in Italy and Australia were analyzed. Logistic regression, classification tree, random forest, and support vector machine models were fitted to the data. The predictive models were built with the aim of maximizing the negative predictive value (NPV) and reducing the rate of SNB procedures though minimizing the error rate. After cross-validation logistic regression, classification tree, random forest, and support vector machine predictive models obtained clinically relevant NPV (93.6%, 94.0%, 97.1%, and 93.0%, respectively), SNB reduction (27.5%, 29.8%, 18.2%, and 30.1%, respectively), and error rates (1.8%, 1.8%, 0.5%, and 2.1%, respectively). Using commonly available clinicopathologic variables, predictive models can preoperatively identify a proportion of patients ( approximately 25%) who might be spared SNB, with an acceptable (1%-2%) error. If validated in large prospective series, these models might be implemented in the clinical setting for improved patient selection, which ultimately would lead to better quality of life for patients and optimization of resource allocation for the health care system.

  12. 77 FR 1456 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Rescission of...

    Science.gov (United States)

    2012-01-10

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  13. 75 FR 72794 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-11-26

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  14. 75 FR 5952 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-02-05

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  15. 76 FR 65684 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-10-24

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  16. POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    F. Li

    2016-06-01

    Full Text Available Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i acquirement of prior-knowledge, (ii pole extraction, (iii components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

  17. Pole-Like Street Furniture Decompostion in Mobile Laser Scanning Data

    Science.gov (United States)

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2016-06-01

    Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i) acquirement of prior-knowledge, (ii) pole extraction, (iii) components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

  18. [From mandatory to participatory prevention: a model applied to the upholstered furniture industry].

    Science.gov (United States)

    Di Leone, G; Trani, G; Falco, S; Attimonelli, Rossella; Carino, M; Lagravinese, D

    2008-01-01

    The Italian 2006-2008 National Health Plan emphasizes synergy and cooperation between the agencies formally involved in the prevention of occupational risks, in agreement with social partners. The so-called 'triangle of the sofa industry' is an interregional geographic area south-west of Bari, Italy. In 2003 this area produced 16% of the world-wide upholstered furniture output, with more than 500 plants of varying size. The aim was to set up a network of communication and cooperation between the competent Agencies and Regions in order to address the rising trend of upper limb work-related musculoskeletal disorders. The first step of the National Health Service Unit in Bari was to assess risk via a Ministerial research project and implement various information campaigns involving institutions, occupational physicians, private companies and public opinion. In a subsequent phase a synergy between the local Departmenst ofPrevention of the different Regions, the Italian Institute for Insurance Occupational Accidents and Disease (INAIL), the trade unions and the upholstered furniture industry Association was established. New joint experimental projects (cutting tools, ergonomic table for assemblers, instruments for isokinetic evaluation) were launched together with training programmes for management, safety technicians and workers. This kind of 'participatory prevention' is more appropriate for the goal of a collaborative effort in order to assist the companies, which is a modern interpretation of the mission of public health prevention operators.

  19. Furniture firms shuns CSL for EMS program expansion

    Energy Technology Data Exchange (ETDEWEB)

    Deans, B

    1982-05-31

    The R.B. Furniture Company's disappointment in its 10 CSL Industries Inc. energy-management systems is responsible for a decision to install Trimax Controls in the remaining 67 stores. At issue are CSL's service policy of using independent installers and service contractors as well as technical problems with the equipment, although R.B. Furniture concedes it had a 2.5-year payback, a 20% drop in electricity consumption, and generally reliable performance of the CSL system. A CSL official claims its higher equipment costs are the real reason. Interviews with CSL and R.B. Furniture Co. representatives explore the attitudes and problems of both firms. The Trimex system includes a three-year warranty. (DCK)

  20. Revision of EU Ecolabel and EU Green Public Procurement criteria for furniture products: Preliminary Report

    OpenAIRE

    DONATELLO SHANE; MOONS HANS; CORDELLA MAURO; KOWALSKA MALGORZATA AGATA; KAPS RENATA BARBARA; WOLF Oliver; HIDALGO Carme; FUENTES Natalia

    2014-01-01

    The EU is responsible for around 20% of global furniture production and the many "ecolabel schemes" of potential relevance to furniture products have been briefly reviewed. Screening of 109 publications relating to the life cycle impacts of furniture products revealed several general trends, namely that material production and processing where the dominant sources of environmental impacts associated with furniture products. A comprehensive review of the use of hazardous substances and mixture...

  1. POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

    OpenAIRE

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2016-01-01

    Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A nove...

  2. The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

    OpenAIRE

    Wang Lin; He Jinfeng; Xu Songjie

    2017-01-01

    In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber...

  3. Understanding perception of wood household furniture: application of a policy capturing approach

    Science.gov (United States)

    David Brinberg; Matthew Bumgardner; Kim Daniloski

    2007-01-01

    Consumer and retailer perceptions of wood household furniture were modeled using a policy capturing approach. A sample of consumers and retailers evaluated four pictures of wood furniture on eight visual cues deemed representative of the furniture purchasing environment. These cues were then regressed on respondents' judgment of willingness to pay for each...

  4. Competitiveness of U.S. wood furniture manufacturers - Lessons learned from the softwood moulding industry

    Science.gov (United States)

    Al Schuler; Russ Taylor; Philip A. Araman

    2001-01-01

    The furniture industry in the United States has been losing market share to imports for the past two decades. This article focuses on the market segment where most of the loss has occurred: the important wood household (non-upholstered) sector (SIC code 2511). In the upholstered furniture sector, exports are still larger than imports. But the wood household furniture...

  5. 41 CFR 109-25.104 - Acquisition of office furniture and office machines.

    Science.gov (United States)

    2010-07-01

    ... furniture and office machines. 109-25.104 Section 109-25.104 Public Contracts and Property Management... furniture and office machines. DOE offices and designated contractors shall make the determination as to whether requirements can be met through the utilization of DOE owned furniture and office machines. ...

  6. 75 FR 54854 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2010-09-09

    ... Hospitality Product Mfg., Co., Ltd. Shanghai Kent Furniture Co., Ltd. Shanghai Season Industry & Commerce Co... International, Ltd., Super Art Furniture Co., Ltd., Artwork Metal and Plastic Co., Ltd., Jibson Industries, Ltd... Hospitality, Inc. Changshu HTC Import & Export Co., Ltd. Chuan Fa Furniture Factory Contact Co., Ltd. Decca...

  7. Identifying future competitive business strategies for the U.S. furniture industry: Benchmarking and paradigm shifts

    Science.gov (United States)

    Albert Schuler; Urs Buehlmann

    2003-01-01

    This paper describes benchmarking activities undertaken to provide a basis for comparing the U.S. wood furniture industry with other nations that have a globally competitive furniture manufacturing industry. The second part of this paper outlines and discusses strategies that have the potential to help the U.S. furniture industry survive and thrive in a global business...

  8. How do retailers rate the United States and Canada as furniture sources compared to China?

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Mary Frye; Torsten Lihra

    2008-01-01

    During the past decade, the U.S. wood household furniture industry has lost a significant share of its domestic market to imported furniture. This market share loss has been widely discussed and analyzed, largely from a manufacturing perspective. A relatively unexplored dimension of household furniture importing is the perspective of the retailer. Retailers play a...

  9. Integrating energy and environmental management in wood furniture industry.

    Science.gov (United States)

    Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

  10. Integrating Energy and Environmental Management in Wood Furniture Industry

    Science.gov (United States)

    Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

  11. Blending the Roles of Interpreter, Entrepreneur, Collaborator. A New Model for Conferences and Institutes Program Planners. The Guide Series.

    Science.gov (United States)

    Dahl, Carolyn Carson

    This six-chapter guide suggests a new approach to describing the knowledge, competencies, and managerial roles inherent in planning effective conferences and institutes. Chapter 1 introduces the many roles of the conferences and institutes program planner and discusses program formats and what makes conference programs unique learning events.…

  12. Customer Relationship within the Furniture Design Market : A qualitative study of how companies within the furniture design market relate to the challenges connected to customer loyalty

    OpenAIRE

    Wahlström, Marie-Louise; Bergström, Jenny

    2010-01-01

    Background: The customer relationship is becoming more important for companies within the Swedish furniture design industry due to competition for market shares. The market is getting more crammed while the interest for furniture design amongst people is increasing, therefore furniture design companies need to find effective ways to attract loyal customers. Research has been made to show the importance of collaboration between companies and this is something that can increase the market share...

  13. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Furniture Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its characteristics, structur...

  14. Sustainable Furniture that Grows with End-Users

    NARCIS (Netherlands)

    Bosch, T.; Verploegen, K.; Grösser, S.N.; Rhijn, G. van

    2017-01-01

    Economically and environmentally it might be more responsible or even feasible to combine products and services to elongate product lifetime. Gispen, a major office furniture producer in the Netherlands, has embraced circular economic principles to create new business, extend product life time and

  15. 46 CFR 169.323 - Furniture and furnishings.

    Science.gov (United States)

    2010-10-01

    ... of fire resistant materials. (b) Existing solid wooden furniture may be retained on existing vessels. (c) Draperies must be fabricated of fire resistant fabrics. (d) Rugs and carpets must be of wool or other material having equivalent fire resistant qualities. (e) Trash receptacles must be constructed of...

  16. Prevent Tipping Furniture from Injuring or Killing Young Children

    Science.gov (United States)

    ... more upsetting than the sudden death of a child — killed by a piece of a furniture, appliance or a television falling on them. “It can happen in a ... be secured. Check with home improvement stores or child retail stores and ask experts what they ... television and computer equipment low to the ground. Do ...

  17. Macroergonomic analysis of an assembly sector of a furniture company.

    Science.gov (United States)

    Cristiane, A A Z; Danielle, M D; Vanessa, C B

    2012-01-01

    From of Macroergonomic Analysis of Work were diagnosed the main ergonomics demands in a furniture company in the city of Cambé, Paraná. Through this method we could identify the most problematic points of the analyzed environment for posterior solutions of improvement with the objective of increasing the working and psychological quality of the employees, motivating their good performance and satisfaction.

  18. FORMULATING ULTRA-LOW-VOC WOOD FURNITURE COATINGS

    Science.gov (United States)

    The article discusses the formulation of ultra-low volatile organic compound (VOC) wood furniture coatings. The annual U.S. market for wood coatings is about 240, 000 cu m (63 million gal). In this basis, between 57 and 91 million kg (125 and 200 million lb) of VOCs are emitted i...

  19. Multilevel model of safety climate for furniture industries.

    Science.gov (United States)

    Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

    2015-01-01

    Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

  20. College and Community in Partnership: The Furniture College at Letterfrack.

    Science.gov (United States)

    Rosenfeld, Stuart A.

    2001-01-01

    A community economic development organization in rural Ireland partnered with a technical college to build a college to teach furniture design and manufacturing, with an emphasis on entrepreneurship and new production technologies. The college has been successful in attracting good students and helping them find employment. A research and…

  1. Assessment of office furniture and knowledge of work ergonomics ...

    African Journals Online (AJOL)

    Background: Poor posture when maintained for a long period can result in musculoskeletal injuries and deformities. Aims: This study aimed at investigating the knowledge of work ergonomics among bank workers, and the ergonomic compliance of office furniture used in some banks, in Enugu metropolis. Methods: This is a ...

  2. Utilization trend of wood species utilized in furniture industry in ...

    African Journals Online (AJOL)

    The utilization trend of four commonly used wood species and two lesser used wood species that are used for furniture making was examined. The wood species are Mansonia altissima (Mansonia), Khaya ivorensis (Khaya), Cordia millenii (Cordia) and Tectona grandis (Teak) as commonly used wood species; Aningeria ...

  3. Prioritization of Wood Species Utilized for Furniture Making in ...

    African Journals Online (AJOL)

    The preference for wood species varied among the three cities and among the three scales of furniture factories. However, Mansonia altissima was most preferred in the three cities with rates of 99.0%, 97.4% and 97.7% in Lagos, Ibadan and Benin respectively. 39 wood species were compiled from the lists of the three cities ...

  4. Gathering structured reflection in the furniture business by Trend Mapping

    DEFF Research Database (Denmark)

    Frei, Andrea Erika; Eriksen, Kaare Riise

    2015-01-01

    Setting up the direction for new product designs in the furniture business can be more or less structured and in many situations the idea for new design concepts, constructions, details, coloring or choice of material are directed by random input from retailers or external designers or from...

  5. Study of educational furniture conformity with students anthropometric dimensions of Isfahan university of medical sciences

    Directory of Open Access Journals (Sweden)

    mehdi Sadeghi

    2010-02-01

    Full Text Available Musculoskeletal disorders, early fatigue induced by static work and the same symptoms are caused by inappropriate designed tools, equipment, building and workplace. Inadequate educational furniture is taken to be the reason of severe posture problems such as low back pain, spinal disorders, fatigue, shoulder and neck pain, and disturbance circulation in legs. So ergonomic design of educational furniture should be carefully considered. Materials and Methods: The present research was a cross-sectional study. Samples included desks and chairs (n=150 chosen from reading rooms of dormitories and faculties of Isfahan university of medical sciences Isfahan- Iran. In the study 2 parameters from desk and 5 parameters from chairs were assessed using a tape-measure and a set-sqare. Data were analyzed by SPSS ver 10 software. Results: Comparing the results from the mean of measured values (for seating height, desk height and desk clearance indicated a significant difference between them (p<0. 00. Conclusion: Findings of the study showed that existing standard in Iran about chairs and tables for educational institutions should be reviewed. Also the most important problem with chairs and desks are seating height and desk surface height respectively. These two parameters didn’t match with anthropometric dimensions of the sudents of Isfahan university of medical sciences.

  6. How Much Does It Cost Institutions to Produce Stem Degrees? Data Brief. The Price and Cost of Science Degrees Series

    Science.gov (United States)

    Delta Cost Project at American Institutes for Research, 2013

    2013-01-01

    This AIR Data Brief breaks down the "cost per degree" estimates for 28 disciplines, including those in the STEM fields, which among the most expensive degrees to produce. The brief points to ways colleges can change their tuition structure to finance STEM degrees more affordably. This data brief is the fourth of four in the series. (See…

  7. Health Manpower Credentialing: Legal Implications of Institutional Licensure. Health Manpower Policy Discussion Paper Series No.: C3.

    Science.gov (United States)

    Crane, Stephen

    The objective of this analysis is to outline in broad fashion the current trends and issues in the licensure of health manpower and to contrast two proposed alternative systems of credentialing that focus on licensure of health care institutions instead of individual health care providers. The argument of the analysis is that the current system of…

  8. AN INVESTIGATION ON THE CUSTOMER RELATIONSHIP MANAGEMENT IN FURNITURE STORES

    Directory of Open Access Journals (Sweden)

    İlker Akyüz

    2004-11-01

    Full Text Available The most valuable thing for corporations is customers in today’s competitive environment. The evaluation obtained with suitable methodology is important vitally in the success of customer relationship management systems applied for the continuous customer satisfaction and devotion. Continuous customer satisfaction, development of communication skills with customers, caring with customers’ desires and compliments before and after sale just in sale time, development of the quality of services being offered to the customers is dependent on the determining customer problems closely and giving customer focused services. In this study, it was tried to reveal the customer relationship management, communication with customer, customer focused sale offered before, after and just in sale time in some furniture stores located in Trabzon. It was found that the furniture stores in Trabzon have been generally trying to give customer focused sale services

  9. Evaluation of Airborne MDF Dust Concentration in Furniture Factories

    Directory of Open Access Journals (Sweden)

    Renilson Luiz Teixeira

    2017-10-01

    Full Text Available ABSTRACT High concentrations of airborne dust are observed during the cutting of medium density fiberboard (MDF boards. This dust, at first considered just uncomfortable for workers, may be harmful to their health. The objective of this work was to evaluate the concentration of airborne dust during the cutting of medium density fiberboard (MDF. The experiment was developed in the MDF cutting sector of three furniture factories located in the city of Lavras/MG. The results showed that the mean concentrations of total dust suspended in these three furniture factories were above the tolerance limit set by the American Conference of Governmental Industrial Hygienists (ACGIH, giving evidence of a serious problem in these companies related to this type of risk agent.

  10. Use of Augmented Reality in the furniture industry

    OpenAIRE

    Carvalho, Elizabeth, Simão; Maçães, Gustavo; Brito, Paulo; Varajão, Isabel; Sousa, Nuno

    2011-01-01

    The architects conceive the interior visual aspect of a house based on sketches and drawings. These drawing schemes are perfectly understandable by technicians that are responsible for their implementation, but to the client, most of the time, they seem somewhat unrealistic and ungraspable in terms of visual model. This issue is especially sensitive when the inner components are actually pieces of different kinds of furniture and other decoration stuff. The ideal situatio...

  11. Perancangan Modular Furniture untuk Food Truck Penjual Makanan Indonesia

    OpenAIRE

    Sherly de Yong, Chetlyne Stefany Soekanto I Gusti Ngurah Ardana

    2016-01-01

    Food and beverage industry growth in Indonesia continues to develop, and need to be traded in location with dense occupants so that the business can be profitable. This has resulted in the emergence of the mobile system, as selling methods are much in demand today. Food vendors are mobile, requiring a furniture design that can support the activity of cooking and selling on a vehicle. By using Kembel design method, through the process of understanding, compressing, processing the data using de...

  12. Analysis of school furniture used in computer classrooms

    OpenAIRE

    Jiří Tauber

    2011-01-01

    With the respect to the fast development of new computer technologies, it is unconditionally necessary that school furniture reflected this trend and adapted to it. Our use of computer technologies and utilities in teaching is increasing. Therefore, it is necessary to improve school desks so that they would be fit for new computer technology. Creation of a compact set of information relative to the issue concerned, which would comprise of needs and requirements for individual pieces of furnit...

  13. EVALUATION OF STREET FURNITURE ACCORDING TO BASIC DESIGN PRINCIPLES

    OpenAIRE

    GHORAB, Peyman; YÜCEL CAYMAZ, Gökçen Firdevs

    2014-01-01

    In the urban context, it is important to create more comfortable and livable environments with proper planning, design and application. Because aesthetic considerations are of more importance today, designing urban furniture to give a more beautiful appearance to cities is of high priority; designers and those working in related disciplines must be careful to observe these principles throughout the design process. This paper describes research conducted to review the aesthetic principles invo...

  14. Physical and chemical evaluation of furniture waste briquettes

    OpenAIRE

    Moreno Caballero, Ana Isabel; Font, Rafael; Conesa, Juan A.

    2016-01-01

    Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified m...

  15. The study of postural workload in assembly of furniture upholstery

    OpenAIRE

    Marek Lasota Andrzej; Hankiewicz Krzysztof

    2017-01-01

    The productivity of the workers is affected by the Work-related Musculoskeletal Disorders (WRMSDs) which common cause of health problems, sick leave and it can result in decreased quality of work and increased absenteeism. The objective of this study is to evaluate and investigate the postural workload of sewing machine operators in the assembly of upholstery in furniture factory by using the Ovako Working Posture Analysing System (OWAS) with sampling. The results indicated that posture code ...

  16. Investigating the Effective Index on Customers Choice in Buying Furniture

    Directory of Open Access Journals (Sweden)

    Hossein Rangavar

    2014-05-01

    Full Text Available The competitive world today, with increasing customers satisfaction and expanding the definition of hosting and its direct connection with quality of products is essential. Thus not only the current customers stay fixed but also it increases. The purpose of this study was to investigate and ranking the crucial indicators that influence the choice of furniture by customers. Because of this, the studied indexes are classified in 6 group: quality, beauty, design, creating a suitable atmosphere for selling the goods, selling conditions and advertising. Population consisted of three major commercial areas in Tehran (Delawaran, Hassan Abad and Yaftabad. Statistical sample consisted a number of 100 people. A questionnaire was developed to gather data. Reliability of the questionnaires has been approved through Cronbach's Alpha coefficient (0.921. Investigation of effective indexes was done by chi-square method and in order to final ranking the indexes, friedman analyses have been used. The results obtained of ranking showed the chief factor in customers choice is under category of beauty due to this elegancy role in customers point of view. After elegancy, according to the classified elements studied in this research, raw material in making furniture, wood production’s price, ergonomy, customers satisfaction for his last purchase and immediate delivery, respectively, are the most important effective index in buying furniture by consumer.

  17. Intensity of rivalry in Czech furniture production industry

    Directory of Open Access Journals (Sweden)

    Lucie Špačková

    2012-01-01

    Full Text Available The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of rivalry represent particular influences defined by Porter in his model of five competitive forces. Main influences identified by Porter, which are increasing the intensity of competition in the furniture production industry in the Czech Republic include low industry concentration, relatively low diversity of competitors, decline in sales, low (or none switching costs, and existing excessive capacity within the industry. Further development will be most significantly influenced by a growing concentration of the bigger Czech producers on domestic market and overall economic development.

  18. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  19. Analisis Praktik Corporate Social Responsibility Perusahaan Furniture di Kabupaten Jepara

    Directory of Open Access Journals (Sweden)

    Aida Nahar

    2015-12-01

    Full Text Available Corporate social responsibility (CSR is a transparent business practices, which are based on ethical values, with particular attention to employees, communities and the environment, and designed to meet the wishes of the shareholders and the public in general. Effort to understand and analyze the practice of CSR in a company is interesting, considering the practice of CSR is not a uniform practice and its implementation is highly dependent on the unique characteristics inherent in the company. The purpose of this study is to investigate to find out the practice of Corporate Social Responsibility by furniture companies in Jepara. Data collection methods used in this study were interviews, direct observation, and analysis of company documents. Data were analyzed by triangulation and interpretation. From the research conducted it can be concluded that the comapany’s motivation in implementing CSR undertaken by the company from Jepara regency furniture is the company’s commitment and enhance the reputation of the company. While the practice of CSR that have been made furniture enterprises in Jepara regency consists of several fields, namely a. economy, including internal and external sectors. Internal sector is focused on training programs for employees. The external sector was focused on facilitating the community development patterns, community groups, and cooperatives. b. Social areas, including the provision of public facilities (infrastructure development, social welfare, education and sports. c. Environment areas, including sustainable water supply.

  20. Supply chain improvements through clustering: Relationships and competitive collaboration in the Norwegian furniture industry

    OpenAIRE

    Lindholm, Jorunn; Rødstøl, Anna With

    2015-01-01

    Master's thesis in Firm management There is an on-going debate regarding what Norway will do when the country can no longer rely as heavily on the oil as a source of wealth and prosperity. As there is a tradition for designing and making furniture in Norway, and the furniture industry is not dependent on favourable natural conditions, this industry could represent an alternative. As the Norwegian furniture manufacturing companies are producing in one world’s most high waged countries, ...

  1. The Influence of Furniture on Air Velocity in a Room:an isothermal case

    OpenAIRE

    Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

    1998-01-01

    Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room.Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set-up is simulated with one of the inlets where a volume resistance represents the furniture.

  2. A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

    OpenAIRE

    Siti Suhaily,; Mohammad Jawaid,; H. P. S. Abdul Khalil,; A. Rahman Mohamed; , F. Ibrahim

    2012-01-01

    This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and te...

  3. Consumer perceptions of children’s furniture in Shanghai and Shenzhen, China

    OpenAIRE

    Chen, Jiao

    2013-01-01

    China’s high-speed economic growth has accelerated consumers’ disposable income evidently. With the improvement of living standards, people have increasingly been concerned about their life quality, especially when buying consumables like food, toys and clothing as well as durable commodities like furniture for their children. In the past ten years, the Chinese children's furniture market has developed rapidly, making up 9% of total furniture market. However, no studies concerning the analysi...

  4. Street furniture concept in Pasar Buah and Bukit Gundaling Based on place identity

    Science.gov (United States)

    Ginting, Nurlisa; Vinky Rahman, N.; Delianur Nasution, Achmad; Nawawiy Loebis, M.; Sinaga, Fitri A.

    2018-03-01

    Tourism is one of the largest sources of the foreign exchange for a country, that encourage many developers to develop it. Karo District located in the province of North Sumatera, Indonesia, which has many tourist destinations with natural and cultural resources, including Pasar Buah and Bukit Gundaling. To develop Tourism, one of way is with increasing place identity in tourist destinations. Unfortunately, place identity in Pasar Buah and Bukit Gundaling are still lacking, so it needs improvement, one of that is the Street furniture in Pasar Buah and Bukit Gundaling. This study aims to design the concept of the Street furniture planning in Pasar Buah and Bukit Gundaling. The method used is a qualitative method, that is design street furniture using five groups elements of street furniture: decorative element, service furniture, trade furniture, signaling furniture, and advertisement furniture. The result of this study is the concept of the design street furniture of Pasar Buah and Bukit Gundaling, which can use to improve place identity in tourism of Karo District.

  5. China’s wood furniture manufacturing industry: industrial cluster and export competitiveness

    OpenAIRE

    Yang, hongqiang; Ji, Chunyi; Nie, Ning; Hong, Yinxing

    2012-01-01

    China is the largest furniture exporter in the world. Its wood furniture industry has become an important part of the country’s forestry economic development. Hence, investigating China’s furniture industry cluster and export competitiveness is favorable for the sustainable development of China’s forestry industry. This study indicates that, under the guidance of the export-oriented strategy of China’s reform and opening up for 30 years, the country’s furniture industry has formed three big i...

  6. The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Wang Lin

    2017-01-01

    Full Text Available In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber physical system( CPS to cover the intelligent network.

  7. The Importance of Methodology Evaluation of School Furniture for Czech Children with Mobility Disability in Relation to Children’s Anthropometry

    Directory of Open Access Journals (Sweden)

    Martin Zach

    2014-01-01

    Full Text Available The paper presents results of research conducted under the support of the IGA LDF MENDELU project, id. No. 32/2010 (Anthropometry in Disabled Children in Relation to Furniture and the NIS MPO ČR FR-TI1/050 project (Information System for the Support of Research, Development, Innovation and Furniture Quality. It gives an account of theoretical and methodological foundations, introduces the project’s research objectives. Its major objective is to familiarise professional public with the results of the conducted research the focus of which was to determine requirements for furniture designated for children with mobility restrictions. The defined requirements then constitute the grounds of school furniture assessment methodology. These requirements are divided into three levels that are somehow interconnected. Application of the methodology as a whole is highly wide and can be directed at all educational institutions in the Czech Republic with the pupils from the target group. The evaluation outcome is a report of each evaluated product. The questions raised also belong to a broader context of the issue at hand, related to the project of protection and safety standards establishment in relation to health status of children and youth, in the context of the “Long-term programme of the improvement of health status of the Czech Republic population – Health for everybody in the 21st century” paper, objective 4: HEALTH OF YOUTH – TO BUILD CONDITIONS FOR YOUNG PEOPLE TO BECOME HEALTHIER AND APTER TO FULFILL THEIR ROLE IN THE SOCIETY BY 2020. It is recommended to make a proper definition of the dimensional characteristics of children and update their measurements for furniture design in the Czech Republic constantly (including revision of technical regulations and innovation dimensions in the literature. This can be considered as an opportunity to improve the health of future generations.

  8. Low-level radioactive waste management handbook series: Low-level radioactive waste management in medical and biomedical research institutions

    International Nuclear Information System (INIS)

    1987-03-01

    Development of this handbook began in 1982 at the request of the Radhealth Branch of the California Department of Health Services. California Assembly Bill 1513 directed the DHS to ''evaluate the technical and economic feasibility of (1) reducing the volume, reactivity, and chemical and radioactive hazard of (low-level radioactive) waste and (2) substituting nonradioactive or short-lived radioactive materials for those radionuclides which require long-term isolation from the environment. A contract awarded to the University of California at Irvine-UCI (California Std. Agreement 79902), to develop a document focusing on methods for decreasing low-level radioactive waste (LLW) generation in institutions was a result of that directive. In early 1985, the US Department of Energy, through EG and G Idaho, Inc., contracted with UCI to expand, update, and revise the California text for national release

  9. Oak Ridge Institute for Science and Education: A guide to record series supporting epidemiologic studies conducted for the Department of Energy

    International Nuclear Information System (INIS)

    1995-01-01

    This guide describes record series that pertain to epidemiologic and health-related studies at the Center for Epidemiologic Research (CER) of the Oak Ridge Institute for Science and Education (ORISE). These records document the health and safety monitoring of employees and contract employees of the Department of Energy (DOE) and its predecessor organizations, the Manhattan Engineer District (MED), the Atomic Energy Commission (AEC), and the Energy Research and Development Administration (ERDA). History Associates Incorporated (HAI) prepared this guide as part of DOE's Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project, HAI's role in the project, the history of the DOE and its epidemiologic research program, and the history of the Oak Ridge Reservation and the Oak Ridge Institute for Science and Education. It also furnishes information on the procedures that HAI sued to select, inventory, and describe pertinent records; the methodology used to produce the guide; the arrangement of the record series descriptions; the location of the records; and procedures for accessing records repositories

  10. Oak Ridge Institute for Science and Education: A guide to record series supporting epidemiologic studies conducted for the Department of Energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-17

    This guide describes record series that pertain to epidemiologic and health-related studies at the Center for Epidemiologic Research (CER) of the Oak Ridge Institute for Science and Education (ORISE). These records document the health and safety monitoring of employees and contract employees of the Department of Energy (DOE) and its predecessor organizations, the Manhattan Engineer District (MED), the Atomic Energy Commission (AEC), and the Energy Research and Development Administration (ERDA). History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project, HAI`s role in the project, the history of the DOE and its epidemiologic research program, and the history of the Oak Ridge Reservation and the Oak Ridge Institute for Science and Education. It also furnishes information on the procedures that HAI sued to select, inventory, and describe pertinent records; the methodology used to produce the guide; the arrangement of the record series descriptions; the location of the records; and procedures for accessing records repositories.

  11. RadioImmunotherapy for adenoid cystic carcinoma: a single-institution series of combined treatment with cetuximab

    Science.gov (United States)

    2010-01-01

    Background Local control in adjuvant/definitive RT of adenoid cystic carcinoma (ACC) is largely dose-dependent. However, some clinical situations do not allow application of tumouricidal doses (i.e. re-irradiation) hence radiation sensitization by exploitation of high endothelial growth factor receptor (EGFR)-expression in ACC seems beneficial. This is a single-institution experience of combined radioimmunotherapy (RIT) with the EGFR-inhibitor cetuximab. Methods Between 2006 and 2010, 9 pts received RIT for advanced/recurrent ACC, 5/9 pts as re-irradiation. Baseline characteristics as well as treatment parameters were retrieved to evaluate efficacy and toxicity of the combination regimen were evaluated. Control rates (local/distant) and overall survival were calculated using Kaplan-Meier estimation. Results Median dose was 65 Gy, pts received a median of 6 cycles cetuximab. RIT was tolerated well with only one °III mucositis/dysphagia. Overall response/remission rates were high (77,8%); 2-year estimate of local control was 80% hence reaching local control levels comparable to high-dose RT. Progression-free survival (PFS) at 2 years and median overall survival were only 62,5% and 22,2 mo respectively. Conclusion While local control and treatment response in RIT seems promising, PFS and overall survival are still hampered by distant failure. The potential benefit of RIT with cetuximab warrants exploration in a prospective controlled clinical trial. PMID:21047402

  12. RadioImmunotherapy for adenoid cystic carcinoma: a single-institution series of combined treatment with cetuximab

    Directory of Open Access Journals (Sweden)

    Weichert Wilko

    2010-11-01

    Full Text Available Abstract Background Local control in adjuvant/definitive RT of adenoid cystic carcinoma (ACC is largely dose-dependent. However, some clinical situations do not allow application of tumouricidal doses (i.e. re-irradiation hence radiation sensitization by exploitation of high endothelial growth factor receptor (EGFR-expression in ACC seems beneficial. This is a single-institution experience of combined radioimmunotherapy (RIT with the EGFR-inhibitor cetuximab. Methods Between 2006 and 2010, 9 pts received RIT for advanced/recurrent ACC, 5/9 pts as re-irradiation. Baseline characteristics as well as treatment parameters were retrieved to evaluate efficacy and toxicity of the combination regimen were evaluated. Control rates (local/distant and overall survival were calculated using Kaplan-Meier estimation. Results Median dose was 65 Gy, pts received a median of 6 cycles cetuximab. RIT was tolerated well with only one °III mucositis/dysphagia. Overall response/remission rates were high (77,8%; 2-year estimate of local control was 80% hence reaching local control levels comparable to high-dose RT. Progression-free survival (PFS at 2 years and median overall survival were only 62,5% and 22,2 mo respectively. Conclusion While local control and treatment response in RIT seems promising, PFS and overall survival are still hampered by distant failure. The potential benefit of RIT with cetuximab warrants exploration in a prospective controlled clinical trial.

  13. Prognostic factors of endometrial cancer: analysis of a series of 206 patients treated at the Institut Curie

    International Nuclear Information System (INIS)

    Chen, Q.; De La Rochefordiere, A.; Mouret-Fourme, E.; Durand, J.C.; Clough, K.; Asselain, B.; Labib, A.; Fenton, J.

    1995-01-01

    From january 1, 1983 to December 31, 1990 two hundred and six patients with an invasive, non metastatic endometrial carcinoma were first treated at Institut Curie. Initial tumoral staging (TNM) was as follows: stage Ia: 48%, stage Ib: 31%, stage II: 15% and stage III-IV: 6 %. Total hysterectomy or colpohysterectomy was performed in 186 cases, with a bilateral oophorectomy in 180 cases. Bilateral limited pelvic lymphadenectomy was performed in 116 cases. Brachytherapy was performed in the pre-operative setting in 25 cases, in the post-operative setting in 134 cases. Only five patients had brachytherapy alone, because of poor medical condition. External irradiation was exclusive in 15 cases and added to surgery for 68 patients. Median follow-up is 61 months (8-122 months). Five-year survival rate is 77% (71-83%); 5-year specific survival rate is 81% (75-87%).Independent prognostic factors for survival in multivariate analysis (Cox regression model) are tumoral stage (p<0.0001), ovarian involvement (p<0.0001), histologic node involvement (p=3D0.005) and grade (p=3D0.01). For local relapse, independent risk factors in the same analysis are ovarian involvement (p=3D0.0004), tumoral stage (p=3D0.01), age (p=3D0.02) and histologic involvement of cervix (p=3D0.04). For distant failure, independent risk factors are histologic node involvement (p=3D0.0001), tumoral stage (p=3D0.002) and grade (p=3D0.003). (authors). 30 refs., 5 tabs., 2 figs

  14. 75 FR 82373 - Wooden Bedroom Furniture From the People's Republic of China: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2010-12-30

    ..., filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  15. 75 FR 19364 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Expedited Sunset...

    Science.gov (United States)

    2010-04-14

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

  16. 76 FR 49729 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2011-08-11

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  17. 77 FR 51754 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2012-08-27

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  18. 75 FR 44764 - Wooden Bedroom Furniture from the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2010-07-29

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  19. 76 FR 68138 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of the 2010...

    Science.gov (United States)

    2011-11-03

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  20. Ergonomic suitability of kitchen furniture regarding height accessibility.

    Science.gov (United States)

    Hrovatin, Jasna; Prekrat, Silvana; Oblak, Leon; Ravnik, David

    2015-03-01

    It is possible to significantly ease kitchen chores with properly sized and appropriately arranged cupboards. In designing kitchen furniture and the optimal depth and the height of storage capacities, accessibility should be taken into consideration. It is known that the optimal storage zone is between 800 and 1100 mm and that there is reduced visibility and accessibility at the level between 1400 and 1700 mm, which is even more prominent for the elderly. This suggests that wall cabinets are not recommended for the elderly. The aim of this study was to determine to what extent kitchens manufactured by Slovenian furniture manufacturers are suitable for users of different age groups with regard to the accessibility of goods stored in the cupboards. Furthermore, based on the measurement analysis, recommendations are provided for designing kitchen furniture that would meet the needs of the elderly. The study, carried out using a computer simulation model, analyzed the products of three Slovenian kitchen manufacturers. The cross section of accessibility in the wall cabinets was determined for different age groups of men and women. The results show that the efficacy of the volume in wall cabinets higher than 600 mm, in comparison to places where objects are easily reachable, is 30% lower for women, thus indicating the inefficiency of storage space in wall cabinets. In terms of accessibility, existing kitchens are not optimal for the elderly, and a model with a deeper worktop and wall cabinets lowered onto the worktop is proposed. Accessibility in such wall cabinets is increased by up to 70% if the body is moved forward by 30°.

  1. CARCINOID TUMOR OF THE DUODENUM: a rare tumor at an unusual site. Case series from a single institution

    Directory of Open Access Journals (Sweden)

    Jaques WAISBERG

    2013-03-01

    Full Text Available Context Duodenal carcinoids are extremely rare, and their characteristics and biological behavior have not been fully elucidated. Objective To analyze the clinicopathological characteristics of patients with resected duodenal carcinoids. Methods Twenty patients (12 females and 8 males were investigated. Their average age was 66.4 ± 5.8 years old (43 to 88 years old. The data corresponding to the clinical picture, diagnosis, treatment, and prognosis of patients with duodenal carcinoid tumors subjected to resection over a period of 18 years (1993-2011 were analyzed. Results The most common symptoms were dyspepsia (50% and epigastric pain (45% followed by weight loss (10% and vomiting (5%. Carcinoid syndrome was not observed in any patient. The lesion was located on the first part of the duodenum in 15 (75% patients, the second part in 4 (20% patients, and the third part in 1 (5% patient. The diagnosis of a carcinoid tumor was established through an endoscopic excision biopsy in 19 (95% patients and an histopathological examination of the surgical specimen in 1 (5% patient. The average tumor size was 1.1 cm ± 0.4 cm (0.3 cm to 6.0 cm. Nineteen (95% patients were initially treated by endoscopic resection of the duodenal lesion. One patient (5%, whose tumor was on the third part of the duodenum underwent a duodenectomy of the third and fourth duodenal parts and duodenojejunal anastomosis. The duodenal carcinoid resection margin was involved in four (20% patients. Four (20% patients were subjected to a partial gastrectomy to fully remove the lesion. The tumor was restricted to the submucosal layer in 16 (80% cases, and it penetrated into the muscular layer in 4 (20% cases. All patients exhibited positive chromogranin A, neuron-specific enolase, and/or synaptophysin immunostaining. The average duration of the follow-up period was 39.6 months (3 to 96 months. Twelve (60% of the 20 cases in this series are alive without any evidence of active

  2. Influence of Machine Exploitation Effectiveness on Furniture Production Quality Level

    Directory of Open Access Journals (Sweden)

    Stasiak-Betlejewska Renata

    2015-12-01

    Full Text Available One of the most important factors determining the company‘s capacity to produce high quality products is the level of machinery operation effectiveness. Companies having modern machinery are characterized by high productivity. To obtain a high quality product, the equipment should be properly used, without any failure, which contributes significantly to the exploitation level increase. The modernity level and the exploitation effectiveness level for chosen machine producing furniture components in relation to the product quality level were analysed in the paper. As a result of the research findings analysis, proposals for corrective actions with regard to machinery maintenance and production processes were presented.

  3. Removal or transport of office furniture and PCs

    CERN Multimedia

    TS Department

    2008-01-01

    The TS/FM Group wishes to remind users that requests for the removal or transport of office furniture must be made using the EDH ‘Transport request’ form. Please select the "Removals" category from the drop-down menu to indicate the nature of the request. Requests for the transport of PCs from your office to Bldg. 513 or back must also be made using the EDH ‘Transport request’ form. In this case select the "PC transport" category from the drop-down menu. TS/FM Group Tel. 160239

  4. The global wood furniture value chain: what prospects for upgrading by developing countries? The case of South Africa

    OpenAIRE

    Kaplinsky, Raphael; Memedovic, Olga; Morris, Mike; Readman, Jeff

    2003-01-01

    Because of its resource and labour intensity, the wood furniture sector presents an opportunity for developing countries and their firms to participate effectively in the global economy. This paper begins with a brief description of the global wood furniture industry and highlights the importance of exports wood furniture products for developing countries and emerging and transitional economies. The paper then maps the wood furniture value chain and opens-up the nature of the buying function,...

  5. Establishing an online store in the furniture retail business : Case study of Lähdesmäki Oy

    OpenAIRE

    Kareno, Justus

    2013-01-01

    This thesis describes the process of establishing an online store for a Finnish furniture retailer. The development of electronic commerce as a means of business is introduced as the force driving furniture retailers to establish an online presence. The theory of electronic commerce is presented and analyzed in terms of differences compared to sales via a conventional store. The development of electronic furniture retailing is analyzed by researching furniture retailers in Finland and th...

  6. Characteristic and Preferences of Green Consumer Stratification As Bases to Formulating Marketing Strategies of Ecolabel-Certified Furniture

    OpenAIRE

    Ririn Wulandari; Budi Suharjo; Agus W. Soehadi; Herry Purnomo

    2012-01-01

    International furniture markets certify ecolabel has been growing, but the domestic market has not yet developed. Unfortunate, because these products have two advantages that ensure environmental sustainability and promote a furniture market. This study was expected to open and developed the domestic market for ecolabel-certified furniture. The aim of this study was to develop marketing strategies for ecolabel-certified furniture on each of green consumer stratifications. Consumer stratificat...

  7. 78 FR 17140 - Upholstered Furniture Fire Safety Technology; Meeting and Request for Comments

    Science.gov (United States)

    2013-03-20

    ... retardant (FR) chemicals, specialty fibers/fabrics without FR chemicals, inherently fire resistant materials... Furniture Fire Safety Technology; Meeting and Request for Comments AGENCY: Consumer Product Safety... Commission (CPSC, Commission, or we) is announcing its intent to hold a meeting on upholstered furniture fire...

  8. 76 FR 57713 - Wooden Bedroom Furniture From the People's Republic of China: Amended Final Results of...

    Science.gov (United States)

    2011-09-16

    ... appearance on behalf of Liberty Furniture Industries Inc. (``Liberty'') on August 17, 2011. The law firm also... Department: (1) Left out the word ``Dongguan'' when it listed the entity ``Dongguan Cambridge Furniture Co., Ltd., Glory Oceanic Co., Ltd.'' (``Cambridge'') in the rate table of the Final Results; (2) did not...

  9. Opportunities for development of local forest markets: the case of Amish furniture manufacturing

    Science.gov (United States)

    Matt Bumgardner; Gary Graham; Charles. Goebel

    2012-01-01

    A dramatic decline in the production of hardwood furniture in the United States has had profound impacts on employment and hardwood markets. Against this backdrop, the Amish-based furniture manufacturing cluster in Ohio has expanded and hardwood lumber consumption by the cluster is significant. Recent research suggests that 71 percent of firms in the cluster expanded...

  10. Educational Furniture for the 16-19 Age Group: Specification and Design. Design Note 30.

    Science.gov (United States)

    Furniture Industry Research Association, Stevenage (England).

    A 1982 British study examined the furniture needs of 16-19 year-old students. This report presented the findings on the technical and performance requirements in terms of durability and ergonomics. This report examines the furniture requirements in teaching spaces, social, refreshment and private study areas, storage requirements for pupils'…

  11. 41 CFR 101-25.104 - Acquisition of office furniture and office machines.

    Science.gov (United States)

    2010-07-01

    ... furniture and office machines. 101-25.104 Section 101-25.104 Public Contracts and Property Management... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.104 Acquisition of office furniture and office machines... machines. The acquisition of new items shall be limited to those requirements which are considered...

  12. The Amish furniture cluster in Ohio: competitive factors and wood use estimates

    Science.gov (United States)

    Matthew Bumgardner; Robert Romig; William Luppold

    2008-01-01

    This paper is an assessment of wood use by the Amish furniture cluster located in northeastern Ohio. The paper also highlights the competitive and demographic factors that have enabled cluster growth and new business formation in a time of declining market share for the overall U.S. furniture industry. Several secondary information sources and discussions with local...

  13. 78 FR 60844 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2013-10-02

    ... Furniture Co., Ltd. Dorbest Ltd., Rui Feng Woodwork Co., Ltd. Aka Rui Feng Woodwork (Dongguan) Co., Ltd., Rui Feng Lumber Development Co., Ltd. Aka Rui Feng Lumber Development (Shenzhen) Co., Ltd., Fine... Fung Wooden Factory, Sun Fung Co., Shin Feng Furniture Co., Ltd., Stupendous International Co., Ltd...

  14. Retouching without Touching : Creating the illusion of recoloured furniture through light projection

    NARCIS (Netherlands)

    van Adrichem, F.; van Bommel, M.; Vasques Dias, M.

    2017-01-01

    In this article an alternative method for recolouring discoloured furniture is presented. The focus is on two discoloured pieces of furniture: an Amsterdam School buffet and a Rococo marquetry commode that both have lost their bright colours due to fading (figures 1, 2). The buffet was dyed with a

  15. The Potential of Computer Controlled Optimizing Equipment in the Wooden Furniture Industry

    Science.gov (United States)

    R. Edward Thomas; Urs Buehlmann; Urs Buehlmann

    2003-01-01

    The goal of the wooden furniture industry is to convert lumber into parts by using the most efficient and cost effective processing methods. The key steps in processing lumber arc removing the regions that contain unacceptable defects or character marks and cutting the remaining areas to the widths and lengths of needed parts. Such equipment has been used in furniture...

  16. How clustering dynamics influence lumber utilization patterns in the Amish-based furniture industry in Ohio

    Science.gov (United States)

    Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

    2011-01-01

    Preliminary studies have suggested that the Amish-based furniture and related products manufacturing cluster located in and around Holmes County, Ohio, uses sizeable quantities of hardwood lumber. The number of firms within the cluster has grown even as the broader domestic furniture manufacturing sector has contracted. The present study was undertaken in 2008 (spring/...

  17. 78 FR 35249 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2013-06-12

    ....; Dongying Huanghekou Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar... Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar Enterprises Ltd... DEPARTMENT OF COMMERCE International Trade Administration [A-570-890] Wooden Bedroom Furniture...

  18. 75 FR 339 - Wooden Bedroom Furniture From the People's Republic of China: Rescission of Antidumping Duty New...

    Science.gov (United States)

    2010-01-05

    ... Republic of China: Rise Furniture Clarification Regarding Withdrawal of Review'' (November 24, 2009... Bedroom Furniture from the People's Republic of China: 2009 New Shipper Review of Rise Furniture Co., Ltd... From the People's Republic of China: Rescission of Antidumping Duty New Shipper Review AGENCY: Import...

  19. Risk-reducing Salpingo-Oophorectomy in Women at Higher Risk of Ovarian and Breast Cancer: A Single Institution Prospective Series.

    Science.gov (United States)

    Ricciardi, Enzo; Tomao, Federica; Aletti, Giovanni; Bazzurini, Luca; Bocciolone, Luca; Boveri, Sara; Landoni, Fabio; Lapresa, Maria Teresa; Maruccio, Matteo; Parma, Gabriella; Peccatori, Fedro; Petrella, Maria Cristina; Zanagnolo, Vanna; Colombo, Nicoletta; Maggioni, Angelo

    2017-09-01

    Occult cancers' reported rates vary from 2-12% and serous tubal intraepithelial carcinomas (STICs) have been identified in 3-12% of the prophylactically removed tubes of women carrying a BRCA mutation. The aim of this study was to evaluate the incidence of tubal minor epithelial atypia (STIL), STIC, and occult invasive cancer and to evaluate the cancer-specific mortality in a prospective series of women at higher risk of ovarian and breast cancer undergoing risk-reducing salpingo-oophorectomy (RRSO) n a tertiary cancer center. A series of RRSO specimens (including endometrial biopsy) from women carrying a BRCA mutation, BRCA-unknown and BRCA-negative were collected between January 1998 and April 2016 at the Division of Gynecology at the European Institute of Oncology. Inclusion criteria were: asymptomatic women who had a negative gynecologic screening within 3 months prior to RRSO. Exclusion criteria were: women with ovarian/tubal cancer prior to RRSO. A total of 411 women underwent RRSO. Median age at RRSO was 47.0 years (range=32-70 years); 75.2% had a history of breast cancer. Fifteen women were diagnosed with an occult cancer (7 STIC, 4 invasive cancers, 2 breast cancers metastatic to the adnexa, 2 endometrial cancer) (3.6%). Sixteen showed a STIL (3.9%). When excluding cases with preoperative positive markers, the occult invasive cancer rate drops to 1.5%. Our study, covering an 18-year period, shows a substantial low risk of occult cancer among a high-risk population of women undergoing RRSO. Our data still support the indication for RRSO in higher-risk patients. An endometrial biopsy should also be routinely obtained as it raises the chances of detecting occult endometrial cancers that may be otherwise missed. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

  20. Analysis of Value Chain Governance: Scenarios to Develop Small-Scale Furniture Producers

    Directory of Open Access Journals (Sweden)

    Rika Harini Irawati

    2011-05-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Furniture industry had shown a long chain of production to consumption, from raw material producers (tree growers, semi-finished producers, finished product producers, and retailers to exporters. Jepara as a centre furniture industry in Indonesia incorporates around 15,000 business units and provide livelihoods to approximately 170,000 workers. This sector contributes about 27% of Jepara‘s people domestic income. Small and medium furniture enterprises (SMEs have significant roles in the furniture industry as production structures are characterized by them. Power and information imbalance throughout the furniture value chain have resulted in problems of uneven distribution of gains among actors of the industry. SME furniture producers have experienced an unfair value added distribution. Hence, development of SMEs is important for strengthening the industry and expected to result in a portion of value added distribution to them.  We are trying to develop scenarios for SME improvement in the furniture industry in Jepara by identifying their problems and implementing Value Chain Analysis (VCA. VCA is an approach to describe SME producer relations with other actors in the industry and the governance type of their relations. Data is collected by interviewing selected SMEs from the association of small scale producers in Jepara to get detailed maps of their value chain. The research will produce future scenarios and intervention points to improve small-scale producer sustainability and better value added distribution among furniture actors. The scenarios will not only benefit selected producers but also the furniture industry of Jepara, and can be adopted for similar industries throughout Indonesia and abroad. Keywords: furniture, value chain, governance, scenario, small-scale

  1. Intelligent Furniture Design in the Elderly Based on the Cognitive Situation

    Directory of Open Access Journals (Sweden)

    Lu Xinhui

    2017-01-01

    Full Text Available This paper analyzes the present situation of Chinese elderly furniture and the elderly has cognitive characteristics that consciousness experiences and recognitions recede, cognitive fuzzy from Information processing. Expounds the elderly intelligent furniture design elements: functional elements required the elderly furniture is easy and simple to handle; Size and shape elements should be biased towards low, light type, reduce multifunction or fold function; colour collocation should use low lightness and low purity natural materials; Emotional elements design should meet the demand of the elderly social emotion. Introduction of intelligent furniture make up the cognitive decline in the elderly, Furniture judge the elderly demand by the inductor, Supplement by hardware control module to solve the special needs of the elderly life. Build design thinking based on the cognitive process and explore the elderly intelligent furniture design. This paper discusses the design process, for example and concludes the design rules: 1.The Operating Experience Pleasure. It is the height matching of user expectation and furniture function. Pleasure in the design of the operating parts mainly embodies in two aspects. Firstly, the Fitts Law; Secondly, it’s The Movement Optimization. 2.”Unconscious” Design. Intelligent furniture need to delete unnecessary operation module, make it easy to understand, furniture function and cognitive scene match with each other. 3. Modularity Design. Modularization can indirectly regulate the scale and specification of the design. Under the premise of individual character, customization, the compression of the cost, Designer should make the elderly intelligent furniture consistent with the user action.4.Design Consistency. The consistency principle reflected in the appearance, color and operation way consistency.

  2. Impact of Furniture Layout on Indoor Daylighting Performance in Existing Residential Buildings in Malaysia

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Mousavi

    2018-06-01

    Full Text Available Currently, home-based computing workspaces have developed substantially all over the world, especially in Malaysia. This growing trend attracts computer workers to run a business from their residential units. Hence, visual comfort needs to be considered in addition to thermal comfort for home workers in their residential working rooms. While such rooms are always occupied with furniture, the layout of the furniture may influence the indoor daylighting distribution. Several various furniture layouts can be arranged in a residential working room. However, to have better generalisation, this study focused on the impacts of mostly-used-furniture-layouts (MUFLs on indoor daylighting performance in residential working rooms. The field measurement was conducted in a typically furnished room under a tropical sky to validate the results of the simulation software under different sky conditions. Then, daylight ratio (DR, as a quantitative daylighting variable, and the illuminance uniformity ratio (IUR, CIE glare index (CGI, and Guth visual comfort probability (GVCP, as qualitative daylighting variables, were analysed through simulation experiments. In conclusion, by changing the furniture layout, daylight uniformity recorded the highest fluctuations in the case room among all variables. While various furniture layouts, in a residential working room in the tropics, may even slightly reduce the extreme indoor daylight quantity, they can worsen the indoor daylight quality compared to an unfurnished space. The paper shows that furniture as an interior design parameter cannot help to improve tropical daylighting performance in a building.

  3. DESAIN DAN IMPLEMENTASI AUGMENTED REALITY BERBASIS WEB PADA APLIKASI FURNITURE SHOPPING MANAGER SEBAGAI ALAT BANTU BELANJA ONLINE

    Directory of Open Access Journals (Sweden)

    Basworo Ardi Pramono

    2012-07-01

    Full Text Available Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya.  FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online.   Aplikasi FSM dikembangkan dengan mengimplementasikan beberapa komponen  teknologi utama yaitu Augmented Reality (AR, engine 3D ke dalam aplikasi.  Keseluruhan komponen tersebut dirancang agar dapat  menghadirkan suasana belanja yang menarik di hadapan user secara digital. Dengan demikian user dapat mencoba apakah furniture yang di beli cocok dengan ruangan. Dengan menggunakan FSM, user dapat mencoba model 3D furniture, memilih model furniture hingga mengambil foto ruangannya dengan hasil visualisasi model furniture 3D yang disukai untuk selanjutnya dapat disimpan.

  4. Extrapulmonary small-cell carcinoma series in a single-institution experience. With a case report of small cell carcinoma in the hypopharynx

    International Nuclear Information System (INIS)

    Monobe, Hiroko; Kagoya, Ryoji; Tojima, Hitoshi

    2010-01-01

    Extrapulmonary small-cell carcinoma (EPSCC) is clinically underrecognized and optimal management remains illusive. Although head and neck EPSCC tends to involve early widespread dissemination and poor prognosis, recently reported favorable outcomes have used concurrent chemoradiotherapy in limited-stage disease. We report an EPSCC case of arising in the hypopharynx successfully treated by induction chemotherapy followed by concurrent chemoradiotherapy. To clarify EPSCC clinically, we retrospectively reviewed clinical courses of all EPSCC records between 1999 and 2008 in a single-institution series. The 14 subjects identified had primary sites at the gastrointestinal tract in 5, uterine cervix in 3, genitourinary system in 2 and at the gallbladder, liver, hypopharynx, and an unidentified primary lymph node in one case each. Of the 14, 2 cases had stage I, 2 cases had stage II, 4 cases had stage III, 5 cases had stage IV in tumor-node-metastasis (TNM) classification. Stage IV subjects usually underwent platinum-based chemotherapy, to which 25% showed partial response (PR) and 75% progressive disease (PD) with median overall survival (OS) of 114.0 days, or 16 weeks. Of stage III or lower subjects, 75% underwent surgery and 62.5% chemotherapy. OS was 1244.0 days or 3.7 years and 2-year survival rates was estimated at 87.5%. Survival duration differed significantly between those in stage III or lower and those in group IV. Age significantly affected survival time in the Cox proportional hazard regression model. Brain metastasis was uncommon in this series, despite the absence of prophylactic cranial radiation. Further studies are needed to improve and clarify the clinical EPSCC course. (author)

  5. RFID- TEKNIIKAN MAHDOLLISTAMAT TYÖAIKASÄÄSTÖT HUONEKALUTEOLLISUUDESSA : - CASE INCAP FURNITURE OY

    OpenAIRE

    Taskinen, Jarkko

    2009-01-01

    Opinnäytetyön tarkoituksena oli selvittää RFID- tekniikan eli radiotaajuudella toimivan etätunnistamisen mahdollistamia työaikasäästöjä huonekaluteollisuudessa. Toimeksiantaja oli Incap Furniture Oy. Incap Furniture Oy on yksi suurimmista mäntyhuonekalusopimusvalmistajista maailmassa. Pääasiakas on Ikea. Incap Furniture Oy on aloittanut projektin, jonka tarkoitus on tutkia RFID- tekniikan mahdollisuuksia ja hyötyjä tehtaiden toiminnassa. Opinnäytetyö oli osa projektia. Opinnäyt...

  6. Design of indoor furniture with acoustic insulation and noise reduction function

    Science.gov (United States)

    Chen, Ziqiang; Lyu, Jianhua; Chen, Ming

    2018-05-01

    In this article, the current status of noise pollution research is analyzed and indoor noise pollution hazard on human body is discussed taking noise pollution as entry point to better understand people's needs in this concern, and it comes to the conclusion that indoor furniture with noise insulation function is required; In addition, the design status and necessity of indoor furniture with noise insulation function are expounded and the material property, structure design essentials and form design are analyzed according to sound transmission principles. In the end, design case study is presented to provide an effective way for design of indoor furniture with acoustic insulation function that meets people's needs.

  7. Analisis Strategi Pemasaran Usaha Jasa Bersama Furniture Jalan Setia Budi Medan

    OpenAIRE

    Silitonga, Natasya Meylani

    2014-01-01

    A thesis is called “Analysis of the strategy marketing Usaha Jasa Bersama Furniture.” Thebackground of this research is the development of business furniture currently, fueled by rising consumption needs as well as the from the community. And this is heightened by the increasing number of housing are constructed, so that is an opportunity that is very large in proportion to the business of furniture.With the increasing number of competitors, then many consumers, to be able to draw an underta...

  8. Tisettanta case study: the interoperation of furniture production companies

    Science.gov (United States)

    Amarilli, Fabrizio; Spreafico, Alberto

    This chapter presents the Tisettanta case study, focusing on the definition of the possible innovations that ICT technologies can bring to the Italian wood-furniture industry. This sector is characterized by industrial clusters composed mainly of a few large companies with international brand reputations and a large base of SMEs that manufacture finished products or are specialized in the production of single components/processes (such as the Brianza cluster, where Tisettanta operates). In this particular business ecosystem, ICT technologies can bring relevant support and improvements to the supply chain process, where collaborations between enterprises are put into action through the exchange of business documents such as orders, order confirmation, bills of lading, invoices, etc. The analysis methodology adopted in the Tisettanta case study refers to the TEKNE Methodology of Change (see Chapter 2), which defines a framework for supporting firms in the adoption of the Internetworked Enterprise organizational paradigm.

  9. Flooring-systems and their interaction with furniture and humans

    DEFF Research Database (Denmark)

    Frier, Christian; Pedersen, Lars; Andersen, Lars Vabbersgaard

    2017-01-01

    Flooring-system designs may be sensitive in terms of their vibrational performance due the risk that serviceability-limit-state problems may be encountered. For evaluating the vibrational performance of a flooring system at the design stage, decisions must be made by the engineer in charge...... of computations. Passive humans and/or furniture are often present on a floor. Typically, these masses and their way of interacting with the floor mass are ignored in predictions of vibrational behaviour of the flooring system. Utilizing a shell finite-element model, the paper explores and quantifies how non......-structural mass can influence central parameters describing the dynamic behaviour of the flooring system with focus on elevated non-structural mass. © 2017 The Authors. Published by Elsevier Ltd....

  10. Application of E-commerce based Internet Plus Strategy in the Chinese Furniture industry with analysis on case study and business model canvas

    OpenAIRE

    Cheng, Yun

    2016-01-01

    Furniture is one of the most important necessities in people’s daily life. The development of furniture industry can also be regarded as the progress of society. China is the world’s biggest furniture manufacturer and exporter. After the rapid development in past few decades, the production, technology and quality of furniture has already mature. However, the traditional marketing models are showing disadvantages. It is important for furniture companies to explore profitable marketing models ...

  11. 77 FR 52311 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2012-08-29

    ... Furniture Co., Ltd. Zhangjiagang Zheng Yan Decoration Co., Ltd. Zhangjiang Sunwin Arts & Crafts Co., Ltd.... Trendex Industries Limited Wan Bao Chen Group Hong Kong Co., Ltd. World Design International Co., Ltd...

  12. 77 FR 21536 - Wooden Bedroom Furniture From the People's Republic of China: Final Rescission of Antidumping...

    Science.gov (United States)

    2012-04-10

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as..., wooden side rails for beds, and wooden canopies for beds) and that do not possess the essential character...

  13. 76 FR 7534 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-02-10

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... rails for beds, and wooden canopies for beds) and that do not possess the essential character of wooden...

  14. The ABCs of Cost Allocation in the Wood Products Industry: Applications in the Furniture Industry

    OpenAIRE

    Quesada-Pineda, Henry J.

    2010-01-01

    Discusses the basics of cost accounting and explains the strengths and weaknesses of two cost accounting techniques - the direct method and the activity-based costing method - using simple examples and applications to the furniture industry.

  15. A research on the effect of global trends in Turkish kitchen furniture sector

    Directory of Open Access Journals (Sweden)

    Ersin Uçar

    2017-11-01

    Full Text Available Through survey results, this study evaluated global trends’ effects on Turkish kitchen furniture production. The level of knowledge and difficulties of catching up with and implementing developmental trends in the Turkish kitchen furniture sector has been seen as having a structure equivalent to world standards because the level of material and technological development has been determined by four criteria: consumer demand, housing plans, technology inadequacy, and material inadequacy. According to the results, findings in this framework, consumer demand was most influential (45.4% in capturing and implementing enterprises’ trends. Evaluation results on kitchen furniture projects implemented by Turkish enterprises within the last 5 years showed that they mostly worked with models with one-lid views in cabinet-door applications (41.6%. As a result, world trends reflect the direct influence of Turkish kitchen furniture manufacturers on cabinet-door models and color preferences for kitchen units.

  16. E3 Success Story - Getting Insight Into Our Organization and Processes at Beachley Furniture Co., Inc.

    Science.gov (United States)

    Beachley Furniture contacted the U.S. EPA to participate in the Green Suppliers Network (GSN) program which is a collaborative venture among industry, EPA, and the Manufacturing Extension Partnership (MEP) program.

  17. The Influence of Office Furniture on the Air Movement in a Mixing Ventilated Room

    DEFF Research Database (Denmark)

    Nielsen, June Richther

    Isothermal and thermal experiments and simulations form the basis of the investigations in this thesis. It is mainly the isothermal case that is studied. The examinations concern how normal office furniture influences the air movements in a mixing ventilated room. Especially, the jet under...... whereas the two last-mentioned inlets are simulated 3-dimensional. In the isothermal simulations a furniture volume is used to represent the physical furniture and in the thermal case a furniture volume together with a volume source is used. The investigations of the isothermal experiments and simulations...... by the thermal forces in the room. The thermal case needs more investigation because only two experiments and the corresponding simulations are the base of the investigations....

  18. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    OpenAIRE

    and Shalihuddin Djalal Tandjung, Muh. Hisjam Adi Djoko Guritno

    2012-01-01

    Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM) model is proposed as an approach for solutions fo...

  19. Studies on the Wood-Based Furniture, Leather Products and Footwear Manufacturing Industries in the Philippines

    OpenAIRE

    Poblador, Niceto; Solis, Adriano; Ybanez, Roy; Aragon, Bienvenido

    1983-01-01

    This paper aims to develop both the micro and macro data on the entire range of socioeconomic, managerial and technical issues faced by the wood-based furniture, footwear and leather tanning industry. The studies are intended to provide an initial base for policy formulation and implementation and to evolve a set of relevant guidelines for managerial and technical decisions. Findings show that the wood-based furniture industry is characterized by relative ease of entry that allows manufacture...

  20. Sistem Dinamis Industri Furniture Indonesia Dari Perspektif Supply Chain Management Yang Berkelanjutan

    OpenAIRE

    Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang

    2010-01-01

    This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulatio...

  1. Sistem Dinamis Industri Furniture Indonesia dari Perspektif Supply Chain Management yang Berkelanjutan

    OpenAIRE

    Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang

    2012-01-01

    This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulatio...

  2. PENGARUH ORIENTASI PASAR TERHADAP KEUNGGULAN BERSAING MELALUI INOVASI PADA UKM BIDANG FURNITURE DI KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Sendhang Nurseto

    2016-02-01

    Full Text Available One of the small and medium enterprises in the city of Semarang is the field of furniture and furniture . Furniture or furniture that is often referred to as a product included in the household so that the furniture is not the scarce goods but is needed by the community . Realization of production every year to reach an average of only 90 % of the target . The resulting production also fluctuated every year , almost every year has decreased . The purpose of this study was to determine the effect of market orientation and innovation to compete SMEs lead with furniture in the city of Semarang . The population in this study was 64 furniture craftsman whose products have been exported to SMEs furniture Semarang . Way of selecting a sample ( respondents were used in this study using nonprobability sampling technique. Analysis using quantitative , qualitative analysis , validity , reliability testing , path analysis , descriptive analysis and differential analysis . The results showed t value of the variable effect of market orientation on innovation by 3.690 , the hypothesis 1 ( H1 that the Market Orientation proven positive effect on innovation . T value of the variable effect of market orientation on Competitive Advantage of 2,079 > t Table , hypothesis 2 ( H2 that the positive effect on market orientation Competitive Advantage proven . T value of the variable influence of Innovation for Competitive Advantage 3.332 > t table , the hypothesis 3 ( H3 that innovation has a positive effect on Competitive Advantage proven . Calculated F value of the variable influences Market Orientation and Innovation for Competitive Advantage by 9.396 > F table , hypothesis 4 ( H4 that the Market Orientation and Innovation positive effect on Competitive Advantage proven . Craftsmen will need to improve understanding of market orientation in the face of competition . Owned and increase innovation to improve the ability and skill to produce a better product thus

  3. TECHNIQUE OF AN ASSESSMENT OF COMPETITIVENESS OF THE ENTERPRISES OF THE FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Vitaliy A. Zhigarev

    2015-01-01

    Full Text Available The purpose of this article is the description of an author’s technique of an assessment of competitiveness of the enterprises of the furniture industry which mainobjective is the economic assessment ofproduction efficiency of production of thefurniture enterprise, an assessment ofthe intra firm making production efficiencyof furniture, identification of the factors influencing overall performance of thefurniture enterprise.

  4. The Level of Utilization of Secondary Timber Species among Furniture Producers

    OpenAIRE

    Antwi-Boasiako, Charles; Boadu, Kwadwo Boakye

    2016-01-01

    Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS) that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and ...

  5. Business Challenges and Design: Theory and Practice in the Furniture Industry in the Republic of Croatia

    OpenAIRE

    Radović, Romina

    2013-01-01

    Background: A systematic and continuous product policy management is important for a company's competitiveness and the question is to what extent and in what way companies engaged in the furniture manufacturing sector actually apply them. Objectives: The objective of this paper is to explore to what extent the design profession is involved in the product policy and teams which define market properties of products in the furniture industry. Methods: In order to achieve the objectives of this p...

  6. Foreign subsidiary development of furniture industry in the context of global recession: case of Vietnam

    OpenAIRE

    Hoang, Ngoc

    2014-01-01

    Wooden furniture industry is a traditional low-technology based and labor intensive industry (Kaplinsky & Readman, 2000), which is highly recommended for global outsourcing. Besides, the raising of “China plus one” manufacturing strategy made Southeast Asian countries became new investment destinations. In case of Vietnam, the largest exporter of wood products in Southeast Asian, wooden furniture industry is highly export-oriented with a fast growing rate especially since 2008 (MARD, 2012). W...

  7. FEA analysis and design optimization for a multifunctional piece of furniture

    OpenAIRE

    Haraga Georgeta; Goanță Adrian Mihai

    2017-01-01

    The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA) application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with...

  8. Flexibility in Modular Furniture Systems in Open Offices, Famagusta, North Cyprus

    OpenAIRE

    E. Farjami; La. Mohammadzadeh Afshar; Li. Mohammadzade Afshar; A. Taran

    2014-01-01

    Nowadays, flexibility introduced as a modern technology in furniture systems especially in interior planning design. According to results, the most important impact of these systems can be seen on open plan design that makes workspaces comfortable and increases the productivity of employees besides making good relationship between them. Briefly, there are some factors along with new systems in furniture design help create inappropriate space to make working better and easier while it has modu...

  9. Spatial Determinants on Export marketing activity in Marshallian Districts: An investigation of the Danish Furniture Industry

    DEFF Research Database (Denmark)

    Andersen, Poul Houman

    2002-01-01

    The purpose of the contribution is investigate the role of localised districts on the organisation of export activities in small and medium-sized furniture producers. To what extent do local environments influence the export activities taken on by firms?......The purpose of the contribution is investigate the role of localised districts on the organisation of export activities in small and medium-sized furniture producers. To what extent do local environments influence the export activities taken on by firms?...

  10. The Opportunity of International Manufacturing Organization for Lithuania's Large Furniture Enterprises

    Directory of Open Access Journals (Sweden)

    Tomas Baltuška

    2016-04-01

    Full Text Available This article analysis international manufacturing theory, current situation in Lithuania’s large furniture enterprises, opportunities for international manufacturing, the advantages of such strategy and the problems that comes along from introduction and imple-mentation of such strategy. The main purposes of this article are to analyze sector of furniture enterprises, examples of successful enterprises of international manufactures. Survey data is analyzed and the conclusions are formulated, which reflect the benefits of the system put in place by companies.

  11. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    OpenAIRE

    Ika Rinawati Dyah; Sriyanto; Puspita Sari Diana; Cantya Prayodha Andana

    2018-01-01

    Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical mater...

  12. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Science.gov (United States)

    Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

    2018-02-01

    Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  13. Importance of Logistics Processes for Customer Service and Firm Performance: Evidence from Furniture Industry of Pakistan

    Directory of Open Access Journals (Sweden)

    Imran Qadir

    2017-11-01

    Full Text Available Research Question: This study examines the relationship between logistics processes, customer service and firm performance in the furniture industry of Pakistan. Motivation: Furniture industry in Pakistan comprises small and medium enterprises wherein production is mainly labor intensive. Therefore, the current study also investigates the mediating role of manufacturing flexibility for the relationship of logistics processes and customer service. The paper applies the logistics models developed by Bowesox (1974, Green et al.(2008, and Tracey (1998 to furniture industry. Idea: The core idea of the paper is to measure the effects of logistics process on customer service and the performance of furniture manufacturing firms. The study takes the logistics process as an independent variable, the customer service as the first dependent variable and manufacturing performance as a moderating variable. Data: Primary data on logistics, customer service, manufacturing flexibility and firm performance were conveniently collected through a questionnaire from owners/managers of 61 furniture manufacturing firms. Tool: Descriptive statistics, correlation and regression analyses were run to draw the results. Findings: Logistics processes positively affect customer service and firm performance. Customer service also exerts a positive effect on firm performance while the moderating role of manufacturing flexibility was not supported for the relationship of logistics processes and customer service. Contribution: Through efficiency in logistics processes, furniture manufacturing firms can serve customers in a superior way to ultimately achieve improved firm performance. The framework being restricted to efficiency of logistics processes only constitutes an important limitation of the study.

  14. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Ika Rinawati Dyah

    2018-01-01

    Full Text Available Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  15. Predictors of monoterpene exposure in the Danish furniture industry.

    Science.gov (United States)

    Hagström, Katja; Jacobsen, Gitte; Sigsgaard, Torben; Schaumburg, Inger; Erlandsen, Mogens; Schlunssen, Vivi

    2012-04-01

    Individuals who work with pine in the furniture industry may be exposed to monoterpenes, the most abundant of which are α-pinene, β-pinene, and Δ(3)-carene. Monoterpenes are suspected to cause dermatitis and to harm the respiratory system. An understanding of the predictors of monoterpene exposure is therefore important in preventing these adverse effects. These predictors may include general characteristics of the work environment and specific work operations. We sought to assess the extent to which workers are exposed to monoterpenes and to identify possible predictors of monoterpene exposure in the pine furniture industry in Denmark. Passive measurements of the levels of selected monoterpenes (α-pinene, β-pinene, and Δ(3)-carene) were performed on 161 subjects from 17 pine furniture factories in Viborg County, Denmark; one sample was acquired from each worker. Additionally, wood dust samples were collected from 145 workers. Data on potential predictors of exposure were acquired over the course of the day on which the exposure measurements were recorded and could be assigned to one of four hierarchic ordered levels: worker, machine, department, and factory. In addition to univariate analyses, a mixed model was used to account for imbalances within the data and random variation with each of the hierarchically ordered levels. The geometric mean (GM) monoterpene content observed over the 161 measurements was 7.8 mg m(-3) [geometric standard deviation (GSD): 2.4]; the GM wood dust level over 145 measurements was 0.58 mg m(-3) (GSD: 1.49). None of the measured samples exceeded the occupational exposure limit for terpenes in Denmark (25 ppm, 150 mg m(-3)). In the univariate analyses, half of the predictors tested were found to be significant; the multivariate model indicated that only three of the potential predictors were significant. These were the recirculation of air in rooms used for the processing of wood (a factory level predictor), the presence of a

  16. Diagnosis and Management of Patients with Paroxysmal Sympathetic Hyperactivity following Acute Brain Injuries Using a Consensus-Based Diagnostic Tool: A Single Institutional Case Series.

    Science.gov (United States)

    Godo, Shigeo; Irino, Shigemi; Nakagawa, Atsuhiro; Kawazoe, Yu; Fujita, Motoo; Kudo, Daisuke; Nomura, Ryosuke; Shimokawa, Hiroaki; Kushimoto, Shigeki

    2017-09-01

    Paroxysmal sympathetic hyperactivity (PSH) is a distinct syndrome of episodic sympathetic hyperactivities following severe acquired brain injury, characterized by paroxysmal transient fever, tachycardia, hypertension, tachypnea, excessive diaphoresis and specific posturing. PSH remains to be an under-recognized condition with a diagnostic pitfall especially in the intensive care unit (ICU) settings due to the high prevalence of concomitant diseases that mimic PSH. A consensus set of diagnostic criteria named PSH-Assessment Measure (PSH-AM) has been developed recently, which is consisted of two components: a diagnosis likelihood tool derived from clinical characteristics of PSH, and a clinical feature scale assigned to the severity of each sympathetic hyperactivity. We herein present a case series of patients with PSH who were diagnosed and followed by using PSH-AM in our tertiary institutional medical and surgical ICU between April 2015 and March 2017 in order to evaluate the clinical efficacy of PSH-AM. Among 394 survivors of 521 patients admitted with acquired brain injury defined as acute brain injury at all levels of severity regardless of the presence of altered consciousness, including traumatic brain injury, stroke, infectious disease, and encephalopathy, 6 patients (1.5%) were diagnosed as PSH by using PSH-AM. PSH-AM served as a useful scoring system for early objective diagnosis, assessment of severity, and serial evaluation of treatment efficacy in the management of PSH in the ICU settings. In conclusion, critical care clinicians should consider the possibility of PSH and can use PSH-AM as a useful diagnostic and guiding tool in the management of PSH.

  17. Bridging long proxy data time series and instrumental observation in the Virtual Institute of Integrated Climate and Landscape Evolution Analyses - ICLEA

    Science.gov (United States)

    Schwab, Markus J.; Brauer, Achim; Błaszkiewicz, Mirosław; Raab, Thomas; Wilmking, Martin

    2015-04-01

    Understanding causes and effects of present-day climate change on landscapes and the human habitat faces two main challenges, (i) too short time series of instrumental observation that do not cover the full range of variability since mechanisms of climate change and landscape evolution work on different time scales, which often not susceptible to human perception, and, (ii) distinct regional differences due to the location with respect to oceanic/continental climatic influences, the geological underground, and the history and intensity of anthropogenic land-use. Both challenges are central for the ICLEA research strategy and demand a high degree of interdisciplinary. In particular, the need to link observations and measurements of ongoing changes with information from the past taken from natural archives requires joint work of scientists with very different time perspectives. On the one hand, scientists that work at geological time scales of thousands and more years and, on the other hand, those observing and investigating recent processes at short time scales. The GFZ, Greifswald University and the Brandenburg University of Technology together with their partner the Polish Academy of Sciences strive for focusing their research capacities and expertise in ICLEA. ICLEA offers young researchers an interdisciplinary and structured education and promote their early independence through coaching and mentoring. Postdoctoral rotation positions at the ICLEA partner institutions ensure mobility of young researchers and promote dissemination of information and expertise between disciplines. Training, Research and Analytical workshops between research partners of the ICLEA virtual institute are another important measure to qualify young researchers. The long-term mission of the Virtual Institute is to provide a substantiated data basis for sustained environmental maintenance based on a profound process understanding at all relevant time scales. Aim is to explore processes of

  18. Desain Dan Implementasi Augmented Reality Berbasis Web Pada Aplikasi Furniture Shopping Manager Sebagai Alat Bantu Belanja Online

    OpenAIRE

    Pramono, Basworo Ardi

    2012-01-01

    Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM) sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya. FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online. Aplikasi FSM dikembang...

  19. DESAIN DAN IMPLEMENTASI AUGMENTED REALITY BERBASIS WEB PADA APLIKASI FURNITURE SHOPPING MANAGER SEBAGAI ALAT BANTU BELANJA ONLINE

    OpenAIRE

    Basworo Ardi Pramono

    2012-01-01

    Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM) sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya.  FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online.   Aplikasi FSM dike...

  20. Mr Drage, Mr Everyman, and the creation of a mass market for domestic furniture in interwar Britain

    OpenAIRE

    Peter Scott

    2007-01-01

    This paper examines strategies used by durable goods retailers to create a mass market in interwar Britain, via a case-study of domestic furniture. Interwar demand for new furniture witnessed particularly rapid growth - mainly owing to the extension of the market to lower-income groups. A number of innovative national retailers eveloped liberal HP facilities to bring furniture within the economic reach of these groups, while sophisticated national advertising campaigns were used to both legit...

  1. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its char...

  2. Guided exploration of physically valid shapes for furniture design

    KAUST Repository

    Umetani, Nobuyuki

    2012-07-01

    Geometric modeling and the physical validity of shapes are traditionally considered independently. This makes creating aesthetically pleasing yet physically valid models challenging. We propose an interactive design framework for efficient and intuitive exploration of geometrically and physically valid shapes. During any geometric editing operation, the proposed system continuously visualizes the valid range of the parameter being edited. When one or more constraints are violated after an operation, the system generates multiple suggestions involving both discrete and continuous changes to restore validity. Each suggestion also comes with an editing mode that simultaneously adjusts multiple parameters in a coordinated way to maintain validity. Thus, while the user focuses on the aesthetic aspects of the design, our computational design framework helps to achieve physical realizability by providing active guidance to the user. We demonstrate our framework on plankbased furniture design with nail-joint and frictional constraints. We use our system to design a range of examples, conduct a user study, and also fabricate a physical prototype to test the validity and usefulness of the system. © 2012 ACM 0730-0301/2012/08- ART86.

  3. The study of postural workload in assembly of furniture upholstery

    Directory of Open Access Journals (Sweden)

    Marek Lasota Andrzej

    2017-01-01

    Full Text Available The productivity of the workers is affected by the Work-related Musculoskeletal Disorders (WRMSDs which common cause of health problems, sick leave and it can result in decreased quality of work and increased absenteeism. The objective of this study is to evaluate and investigate the postural workload of sewing machine operators in the assembly of upholstery in furniture factory by using the Ovako Working Posture Analysing System (OWAS with sampling. The results indicated that posture code 2111 (back code: 2 – bent forward; arms code: 1 – both below the shoulder joint; legs code: 1 – sitting position; load code: – 1 less than 10 kg was the most common working posture rating 38.1%; 63.9% of positions displayed non-neutral back postures and 52% received harmful action categories. The performed assembly tasks have an influence on harmless and harmful action categories. This study is crucial on assembly, and in the future work allows develop a framework for assessment the physical risk of WRMSDs in assembly.

  4. Effects ok ikea's entry into a furniture production cluster

    Directory of Open Access Journals (Sweden)

    Vasco Eiriz

    2016-04-01

    Full Text Available The entry of a multinational into a cluster, a geographic agglomeration in a given place or region of predominantly small and medium enterprises specialized in a given industry or related industries, impacts the incumbent in the cluster. Aiming to identify the main effects of a multinational entry on the firms’ strategy in a cluster, it was analyzed the entry of IKEA, a Swedish multinational, into the cluster of furniture production in Paços de Ferreira and Paredes, in Portugal. In this study, the data collection technique to access primary data was a survey. The sample has small enterprises, which is similar to the structure of firms in the studied cluster. Results show that more than half the sample thinks that the entry of the multinational had not affected them. However, the firms that acknowledge a significant impact, assess that impact as negative. The competitiveness factors that have improved more significantly after IKEA’s entry were new product development and exporting strategies. The main responses of incumbent firms to the multinational entry were internationalization and the development of generic strategies of differentiation and focus based on differentiation.

  5. Advanced oxidation-based treatment of furniture industry wastewater.

    Science.gov (United States)

    Tichonovas, Martynas; Krugly, Edvinas; Grybauskas, Arturas; Jankūnaitė, Dalia; Račys, Viktoras; Martuzevičius, Dainius

    2017-07-16

    The paper presents a study on the treatment of the furniture industry wastewater in a bench scale advanced oxidation reactor. The researched technology utilized a simultaneous application of ozone, ultraviolet radiation and surface-immobilized TiO 2 nanoparticle catalyst. Various combinations of processes were tested, including photolysis, photocatalysis, ozonation, catalytic ozonation, photolytic ozonation and photocatalytic ozonation were tested against the efficiency of degradation. The efficiency of the processes was primarily characterized by the total organic carbon (TOC) analysis, indicating the remaining organic material in the wastewater after the treatment, while the toxicity changes in wastewater were researched by Daphnia magna toxicity tests. Photocatalytic ozonation was confirmed as the most effective combination of processes (99.3% of TOC reduction during 180 min of treatment), also being the most energy efficient (4.49-7.83 MJ/g). Photocatalytic ozonation and photolytic ozonation remained efficient across a wide range of pH (3-9), but the pH was an important factor in photocatalysis. The toxicity of wastewater depended on the duration of the treatment: half treated water was highly toxic, while fully treated water did not possess any toxicity. Our results indicate that photocatalytic ozonation has a high potential for the upscaling and application in industrial settings.

  6. Comparative analysis on the adoption of innovation in furniture companies

    Directory of Open Access Journals (Sweden)

    Rodolfo Reinaldo Hermes Petter

    2013-06-01

    Full Text Available This study aimed to identify factors categorical adoption of innovation in three main groups: in products, processes and administrative procedures in a group of micro and small enterprises in the furniture sector, located in the middle western state of Santa Catarina. In particular, the study sought to compare the data of a survey conducted by SEBRAE (2009 observed the same factors present innovation in micro and small businesses scattered throughout the Brazilian territory, in order to compare the national stage for the adoption of innovation in relation the scenario presented by the companies studied in this research. Data collection took place by means of a questionnaire consisting of multiple choice closed questions related to the three aforementioned groups of innovation, which was answered by managers of the constituent companies of the group studied. As a result of this research, it was found that the adoption of innovation in product development is the most important aspect in the surveyed companies. It was also found that they seek to adopt the innovation with the objective of entering new markets. However, the main difficulty in adopting innovation were identified lack of skilled labor, shortage and / or lack of access to technology and financial difficulties. Compared to general adoption of innovation by micro and small enterprises studied by SEBRAE (2009, the studied firms have a tendency to develop in the same direction.

  7. STRATEGI PENINGKATAN DAYA SAING INDUSTRI FURNITURE ROTAN INDONESIA DI KAWASAN ASEAN DAN TIONGKOK

    Directory of Open Access Journals (Sweden)

    Rudi Eko Setyawan

    2016-11-01

    Full Text Available Competitiveness of a country’s export commodities is one of the indicators used to measure its economic progress. This study aims to analyze the competitiveness of Indonesian rattan furniture in China and the ASEAN region, along with the influencing factors and to conclude appropriate strategies to improve its competitiveness. The analysis was conducted by utilizing Diamond's Porter, Normalized Revealed Comparative Advantage (NRCA, and panel data regression. The results showed that the competitiveness of Indonesian rattan furniture in the ASEAN region and China, in the period of 2001 to 2014, is fluctuated with small level of competitiveness. This notion can be seen from all of the positive NRCA index values. In the Fixed Effects Model (FEM, the independent variables that significantly influence NRCA include the export prices and volumes, global prices of rattan furniture and raw rattan, the number of rattan industries, production of real rattan, production value of rattan, investment of rattan industry, direct labor of rattan industry, interest rate of Bank loans, implementation of ACFTA and violation policy of raw and semi-finished rattan exports. To increase the competitiveness of Indonesian rattan furniture, the government is urged to establish a development or training center for the innovative designs and improvement of quality standard of Indonesian rattan furniture. This is also supported by a guarantee of rattan raw material availability and technological improvement of rattan processing industry. Thus, the third step to perform is the improvement of infrastructure and distribution chain, improvement of market information systems, and strengthening of brand image of rattan furniture in Indonesia.Keywords:  competitiveness of rattan furniture, diamond's porter, normalized revealed comparative advantage, fixed effect model ABSTRAKDaya saing komoditas ekspor negara merupakan salah satu indikator yang digunakan untuk mengukur kemajuan

  8. Ergonomic suitability of educational furniture and possible health implications in a university setting

    Science.gov (United States)

    Odunaiya, Nse A; Owonuwa, Dolapo D; Oguntibeju, Oluwafemi O

    2014-01-01

    Ergonomically unsuitable school furniture is frequently considered one of the major causes of severe posture problems in adulthood. This study was designed to determine the ergonomic suitability of educational furniture in the lecture theaters at the University of Ibadan to serve as a case study. Sample of convenience was used to select participants for this study. The lecture theaters were selected based on their capacity, design, and dimension. A total of 240 students (120 males and 120 females) participated in this study. The ergonomic suitability of lecture theaters was determined by analyzing the mismatches between student anthropometric dimensions and furniture dimensions, and also by analyzing the design and orientation of the lecture theaters. The data were analyzed using descriptive statistics of mean, standard deviation, range, and median. The results showed that there was a significant difference in height between males and females but no significant difference between other anthropometric variables measured. About 20% of the participants had a fitting seat height, while seat height was unsuitable for the remaining 80.4%. On the other hand, 23.3% had a fitting seat depth, while it was unsuitable for 76.7% of the participants, and 99.6% of the participants had fitting desk clearance but 0.4% found it unsuitable. A total of 25.8% of the participants had a fitting desk height, while 74.2% of the students found it unsuitable. It was concluded that the furniture in the lecture theaters at the university studied was not ergonomically suitable for the students. Hence it is recommended that further studies, including more universities across a wide spectrum of society, should be performed to determine the effect of furniture on student health, and the need to adopt the use of adjustable furniture in lecture theaters to prevent health hazards that may occur secondary to the use of unsuitable furniture. PMID:24511247

  9. Influence of way of finishing furniture segments on amount emissions VOCs

    Directory of Open Access Journals (Sweden)

    Petr Čech

    2010-01-01

    Full Text Available The study deals with the influence of way of finishing furniture segments on amount emissions VOCs (volatile organic compounds. The so-called Volatile Organic Compounds (VOC are among the largest pollution sources of both the internal and external environments.VOC is defined as emission of any organic compound or a mixture thereof, with the exception of methane, whereby the compound exerts the pressure of 0.01 kPa or more at the temperature of 20 °C (293.15 K and reaches the corresponding volatility under the specific conditions of its use and can undergo photochemical reactions with nitrogen oxides when exposed to solar radiation. The effects of VOC upon environment can be described by equation: VOC + NOx + UV radiation + heat = tropospheric ozone (O3In this work there were tested MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components’ production. Next were tested compressed wood, which was used as a second material of furniture components. These both chosen materials was covered by resin impregnated paper and than sequentially finished by regular coat of finish.An attention of this study is especially put on mentioned factors and on quantity of instant and long-term VOCs emissions emitted from furniture components.The amount of emissions from furniture components, in different phases of the preparation including the resin impregnated paper coating finish, was monitored within the time intervals of 24 hours and 720 hours starting after the time of the finish preparation.The MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components´ production.A compressed wood was used as a second material of furniture components. This alternative material was covered by resin impregnated paper and than sequentially finished by regular coat of finish.

  10. The Furniture Industry In Londrina A Indústria de Móveis em Londrina

    Directory of Open Access Journals (Sweden)

    Marcia Regina Gabardo da Câmara

    2004-11-01

    Full Text Available The Brazilian furniture industry is organized in clusters. Cluster is an agglomerate of located companies in a certain area that you/they develop their activities in an articulate way and with a logic in common and whose dynamics depends on the fact that those companies accomplish similar activities, use specific labor and raw materials, etc. inducing interaction and synergy, due to articulated performance, they provide to the group of companies competitive advantages that are reflected in an differentiated performance. The companies agglomerated geographically, mainly SMEs - small and medium enterprises - present success - greater competitiveness, generation of jobs, technological innovations, etc. In the area of Londrina - PR, there is a geographical agglomerate of companies producing of pieces of furniture, with prominence for the residential pieces of furniture and of office. The study tried to identify if the geographical gathering of furniture companies in the area corresponds or not to a cluster. A great potential was verified for the development of the same, due to the proximity with customers and suppliers and in relation to the available infrastructure of services. However, any form of cooperative action was not verified among companies or enter companies to develop complementary activities, it was not also verified any institution or support association for the companies. It is concluded that in the area of Londrina, the cluster is incipient because in spite of the gathering of companies, due to the low vertical links and absence of horizontal and multilateral links that characterize more advanced clusters, the synergetic effects of the gathering are not verified.A indústria moveleira brasileira está organizada em clusters. Cluster é um aglomerado de empresas localizadas em uma determinada região que desenvolvem suas atividades de forma articulada e com uma lógica em comum e cuja dinâmica pode ser determinada pelo fato dessas

  11. Determination of effective criteria on development of RTA Furniture Industry in Iran

    Directory of Open Access Journals (Sweden)

    hosein omidi

    2016-06-01

    Full Text Available Ready to assemble furniture industry in Iran has not been considered by practitioners and investors as it is known in the other countries. While, it is possible to achive the many competitive advantage, if this industry develop in Iran. With regard to this issue, the goal of this study is to introduce the potential market for ready to assemble furniture and determination and prioritize of the effective criteria on development of Iran ready to assemble furniture industry. For this purpose, after preliminary investigation and interview with some of the furniture producers and relevant experts, the identified criteria were divided into five major groups as Economic, Management, Marketing & Sales, Technical-Technological and Infrastructure and as well as 42 sub-criteria. The hierarchy of these criteria was designed and then the weighting values of criteria and sub-criteria were determined using Analytical Hierarchy Process (AHP by expert choice software. The results indicated that the management and marketing & sales criteria have the highest weighting values at the first level. In addition, among the effective sub-criteria, the criteria as marketing innovation, design innovation, operations management, logistics management, raw materials innovation and product promotion, have the highest priorities for development of ready to assemble furniture industry in Iran.

  12. Bamboo as sustainable material for furniture design in disaster and remote areas in Indonesia

    Science.gov (United States)

    Sofiana, Yunida; Wahidiyat, Mita; Caroline, Octaviana Sylvia

    2018-03-01

    Bamboo has been known as a sustainable material for architecture, but only used on a small scale for furniture. However, even though it a sustainable resource, many people considered Bamboo as outcast material for furniture because of its appearance. Evidently, the use of bamboo is often used to make simple tools with similar traditional designs for everyday life. The tradition of using bamboo was not further explored with respect to the ongoing development of creative design and function in the era of today’s modern technology. In retrospect to the above issues, this study is aimed to introduce the used of bamboo for material furniture in disaster and remote areas in Indonesia to increases their quality of life. It uses a research by a method of collecting data through surveys, literature review, interviews and training to determine the types of bamboo used for material furniture in disaster and remote territories. The results of this study is intended to show that the use of bamboo can be further developed into furniture for disaster and remote territory to create higher values of the products and increase the quality of life.

  13. ANALISIS PENGUKURAN PRODUKTIVITAS PADA CV. CITRA JEPARA FURNITURE

    Directory of Open Access Journals (Sweden)

    Darminto Pujotomo

    2012-02-01

    Full Text Available CV. Citra Jepara adalah perusahaan furnitur ekspor. Pada masa itu, perusahaan hanya melihat level keuntungan untuk mengkaji perusahaan telah berjalan lebih baik atau kebalikannya. Hasil persepsi membuat perusahaan hanya sedikit memperhatikan efisiensi pemakaian sumber daya yang dimiliki (input sehingga perusahaan membutuhkan biaya besar untuk melakukan aktivitas perusahaan.Penelitian ini mempelajari evaluasi produktivitas perusahaan dan pengukuran serta hubungan antara level produktivitas dengan level profitabilitas (kemampuan perusahaan untuk menciptakan laba yang dapat dicapai oleh perusahaan.Hasil penelitian ini tentang pengukuran produktivitas parsial memperlihatkan level produktivitas berubah-ubah dan masih memerlukan usaha peningkatan produktivitas parsial terutama dalam pemakaian masing-masing input dengan efisien. Level Total Factor Productivity selama perioda pengukuran memperlihatkan level pertumbuhan positif. Ini melukiskan perusahaan sukses dalam mengelola input tenaga kerja dan modal kolektif yang dimiliki. Level Total Productivity selama perioda pengukuran menunjukkan level pertumbuhan yang berubah-ubah. Ini melukiskan perusahaan itu belum dapat mengelola input yang dimiliki keseluruhan dengan sukses. Untuk melukiskan hubungan antara produktivitas total dengan profitabilitas dari hasil penelitian bisa diketahui faktor produktivitas (0,998 mempunyai pengaruh lebih besar dibandingkan pemulihan harga (0,457 untuk peningkatan profitabilitas perusahaan selama kurun waktu satu tahun perioda pengukuran. Diperlukan usaha untuk meningkatkan profitabilitas perusahaan untuk periode mendatang disertai usaha untuk meningkatkan produktivitas yang memusatkan pada peningkatan produktivitas material dan produktivitas modal sebagai input yang sangat mempengaruhi profitabilitas perusahaan dengan cara berkelanjutkan dan berkesinambungan. Kata kunci: pengukuran evaluasi dan produktivitas, profitabilitas    CV. Citra Jepara is an export furniture

  14. Determinants of wood dust exposure in the Danish furniture industry.

    Science.gov (United States)

    Mikkelsen, Anders B; Schlunssen, Vivi; Sigsgaard, Torben; Schaumburg, Inger

    2002-11-01

    This paper investigates the relation between wood dust exposure in the furniture industry and occupational hygiene variables. During the winter 1997-98 54 factories were visited and 2362 personal, passive inhalable dust samples were obtained; the geometric mean was 0.95 mg/m(3) and the geometric standard deviation was 2.08. In a first measuring round 1685 dust concentrations were obtained. For some of the workers repeated measurements were carried out 1 (351) and 2 weeks (326) after the first measurement. Hygiene variables like job, exhaust ventilation, cleaning procedures, etc., were documented. A multivariate analysis based on mixed effects models was used with hygiene variables being fixed effects and worker, machine, department and factory being random effects. A modified stepwise strategy of model making was adopted taking into account the hierarchically structured variables and making possible the exclusion of non-influential random as well as fixed effects. For woodworking, the following determinants of exposure increase the dust concentration: manual and automatic sanding and use of compressed air with fully automatic and semi-automatic machines and for cleaning of work pieces. Decreased dust exposure resulted from the use of compressed air with manual machines, working at fully automatic or semi-automatic machines, functioning exhaust ventilation, work on the night shift, daily cleaning of rooms, cleaning of work pieces with a brush, vacuum cleaning of machines, supplementary fresh air intake and safety representative elected within the last 2 yr. For handling and assembling, increased exposure results from work at automatic machines and presence of wood dust on the workpieces. Work on the evening shift, supplementary fresh air intake, work in a chair factory and special cleaning staff produced decreased exposure to wood dust. The implications of the results for the prevention of wood dust exposure are discussed.

  15. Hazardous properties of paint residues from the furniture industry.

    Science.gov (United States)

    Vaajasaari, Kati; Kulovaara, Maaret; Joutti, Anneli; Schultz, Eija; Soljamo, Kari

    2004-01-30

    The objective of this study was to screen nine excess paint residues for environmental hazard and to evaluate their disposability in a non-hazardous or hazardous-waste landfill. These residues were produced in the process of spray-painting furniture. Residues were classified according to their leaching and ecotoxicological properties. Leaching properties were determined with the European standard SFS-EN 12457-2 leaching-test. The toxicity of the leaching-test eluates was measured with plant-, bacteria- and enzyme-inhibition bioassays. Total organic carbon, formaldehyde and solvent concentrations in the solid wastes and in the leaching-test eluates were analysed. It seemed likely that leached formaldehyde caused very high acute toxicity in leaching-test eluates of the dry-booth residues. This hypothesis was based on the fact that the formaldehyde concentrations in the leaching-test eluates of the dry-booth residues were 62-75 times higher than the EC50 value reported in the literature for formaldehyde. The results of the water-curtain booth residues showed that the samples with the highest TOC and aromatic solvent concentrations were also the most toxic. The studied excess paint residues were complex organic mixtures and contained large amounts of compounds not identifiable from chemical data. Therefore, the evaluation of the hazard based solely on available chemical data is unlikely to be sufficient, as evidenced by our study. Our results show that harmful compounds remain in the solid waste and the toxicity results of their leaching-test eluates show that toxicity may leach from residues in contact with water at landfill sites. They also confirm the benefit of combining chemical and ecotoxicological assays in assessing the potential environmental hazard of complex organic mixtures found in wastes. Copyright 2003 Elsevier B.V.

  16. Research, Teaching Training in Demography: A Directory of Institutions in the ESCAP Region. Asian Population Studies Series No. 8, Supplement No. 3.

    Science.gov (United States)

    United Nations Economic and Social Commission for Asia and the Pacific, Bangkok (Thailand).

    This directory contains information on 39 institutions and 108 projects of research teaching and training in demography in Asia and the Pacific. Eight countries are represented: Australia, Bangladesh, Hong Kong, India, Iran, Japan, New Zealand, and Pakistan. The following information is given for each institution: name, address, person in charge,…

  17. Radiation technology in finishing process improves health, safety and environment (HSE) in the furniture manufacturing industry

    International Nuclear Information System (INIS)

    Ahmad Shakri Mat Seman

    1999-01-01

    In furniture manufacturing, processes like cross cutting, molding, planning, shaping, turning, assembling and finishing are involved. The most significant types of negative impact of these processes are such as dust emission, noise, hazardous work, health risk, emission of organic solvent, toxic chemicals emission and chemical waste. In the finishing process, a number of negative effects that will cause health, safety and environmental (HSE) performance. This article highlights the environmental problems in the furniture finishing processes and how the radiation technology can reduce these negative impacts. The drawbacks that hamper the manufacturers from adopting this technology are also discussed. The objective of the paper is to create the awareness among the industrialist and consumers on the HSE hazardous in furniture finishing and steps can be taken to improve

  18. Proposal for the Award of a Blanket Order for the Supply of Office Furniture

    CERN Document Server

    1999-01-01

    This document concerns the award of a blanket order for the supply of office furniture. Following a market survey carried out among 87 firms in seventeen Member States, a call for tenders (IT-2590/SPL) was sent on 5 November 1998 to nine firms in four Member States. By the closing date, CERN had received seven tenders. The Finance Committee is invited to agree to the negotiation of a contract for the supply of office furniture with the company A+Z Bürosysteme (DE), the lowest bidder complying with the specification, up to a total amount of 1 600 000 Swiss francs, not subject to revision until 30 March 2000, for an initial period of three years, with an option to renew the contract for two further one-year periods. A+Z Bürosysteme has declared the following origin of the furniture covered by this adjudication proposal: DE - 90% and CH - 10%.

  19. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry

    Science.gov (United States)

    Black, A.; Evans, J. C.; Hadfield, Esme H.; Macbeth, R. G.; Morgan, A.; Walsh, M.

    1974-01-01

    Black, A., Evans, J. C., Hadfield, Esme H., Macbeth, R. G., Morgan, A., and Walsh, M. (1974).British Journal of Industrial Medicine,31, 10-17. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry. Measurements of mucociliary clearance from the anterior end of the middle turbinate were made using technetium-99m-labelled particles in nine woodworkers from the furniture industry and in 12 controls, none of whom had been occupationally exposed to wood dust. Clearance rates in the controls ranged from 1·9 to 18·5 mm min-1 with a mean of 6·8. These values are in good agreement with measurements reported elsewhere for normal subjects. Only one of the woodworkers had a clearance rate which fell within the normal range and he had been occupationally exposed for the shortest period (6 years). In four woodworkers clearance was very slow (furniture industry for more than 10 years. PMID:4821406

  20. Use of design as competitive advantage in the furniture industry at Santa Maria/RS

    Directory of Open Access Journals (Sweden)

    Leoni Pentiado Godoy

    2012-08-01

    Full Text Available This article shows the contribution of innovative and proactive professional design to increase the competitiveness of the supply chain sector. Thus, the question that motivates the study were: how the design as a strategy, aligned to quality, can act as a competitive to micro and small enterprise in the furniture sector? The study conducted individual interviews with furniture industry managers and used questionnaires to furniture consumers in Santa Maria, located in the center of Rio Grande do Sul State. The research has shown that the search for mechanisms that create competition between companies is increasingly intense and the race for innovative methods to achieve efficiency has great importance. The design adds value to product in terms of aesthetics, ergonomics, comfort and functionality, besides being a very important element in the rationalization of production

  1. Decline in the U.S. furniture industry: a case study of the impacts to the hardwood lumber supply chain

    Science.gov (United States)

    Shawn T. Grushecky; Urs Buehlmann; Al Schuler; William Luppold; Ed Cesa

    2006-01-01

    Traditionally, the wood household furniture industry has accounted for a sizeable portion of total hardwood lumber use in the United States. However, for more than a decade, imports have gained an increasing share of the hardwood furniture market, and lumber consumption by this industry has declined dramatically in the last 5 years. We used a case study methodology to...

  2. Perceptions of firms within a cluster regarding the cluster's function and success: Amish furniture manufacturing in Ohio

    Science.gov (United States)

    Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

    2011-01-01

    The Amish-based furniture manufacturing cluster in and around Holmes County, OH, is home to some 400 shops and has become an important regional driver of demand for hardwood products. The cluster has expanded even as the broader domestic furniture industry has declined. Clustering dynamics are seen as important to the success, but little information has been available...

  3. Furniture Firm Van Den Berghe-Pauvers: Fully-fledged Partner in the Postwar Promotion of Modern Design in Belgium

    NARCIS (Netherlands)

    Flore, F.M.W.

    2013-01-01

    After the Second World War, the Belgian furniture industry responded slowly to the international developments in the field of modern design. For many years, it remained largely focused on the use of solid wood, traditional craftsmanship, and the production of "style furniture" - a term that refers

  4. Factors related to furniture anchoring: a method for reducing harm during earthquakes.

    Science.gov (United States)

    Haraoka, Tomoko; Hayasaka, Shinya; Murata, Chiyoe; Yamaoka, Taiji; Ojima, Toshiyuki

    2013-02-01

    Fatalities and injuries during an earthquake can be reduced by taking preemptive measures before-hand, and furniture anchoring is an important safety measure for all residents. This study sought to clarify the factors associated with furniture anchoring within the home. A self-administered mail survey was completed from July to August 2010 by 3500 men and women between the ages of 20 and 69 years who were chosen at random from an official government resident registry of 2 cities in Japan. Of the 1729 valid responses, 37.1% reported furniture anchoring. An association with furniture anchoring was observed for having viewed earthquake intensity maps or damage predictions (odds ratio [OR] 1.92, 95% C1 1.54-2.39), expressing concern about a future earthquake (OR 2.07, 95% C1 1.36-3.15), feelings of urgency (OR 1.90, 95% CI 1.47-2.45), accuracy of the government disaster preparedness information (OR 1.68, 95% CI 1.17-2.42), knowledge of the meaning of emergency earthquake warnings (OR 1.67, 95% CI 1.12-2.48), and participation in voluntary disaster preparedness activities (OR 1.40, 95% C1 1.12-1.75). Furniture anchoring was found to be associated with risk awareness, risk perception, disaster preparedness information provided by government to residents, knowledge of earthquakes, participation in voluntary disaster preparedness activities, nonwooden structures, and marital status. An increase in furniture anchoring is important and can be achieved through education and training in daily life.

  5. Investigation of Miter Corner Joint Strength of Case Furniture from Particleboard

    Directory of Open Access Journals (Sweden)

    Valdas NORVYDAS

    2012-12-01

    Full Text Available Most pieces of case furniture (kitchen and bathroom furniture, cabinets, wardrobes, tables and etc. are made of 18 mm thick wood particle boards finished with various coatings. This three-layered constructional material is obtained by bonding wood particles of different fractions with synthetic resins using heating. The exploitation duration and quality of case furniture is determined by the mechanical properties of wood particle boards and the construction of joints of wood-based panels. On a frequent basis, pieces of case furniture with non-dismantable and dismantable construction are joined by using multidowel glued joints and cam connecting fittings intended for furniture, respectively. Wood-based panels can be joined with mitre joints whose mechanical properties have not undergone testing and comparison with regular joints when applying insertable wooden dowels or furniture connecting fittings. During the testing of particle board properties it was established that joining wood-based panels in this way ensures most efficient use of mechanical characteristics of the particleboard. In addition to the properties of the mitre joint, the tests also allowed determining the bending strength, tensile strength and bonding strength of the constructional material, and providing an original method for testing board properties, which can be successfully applied to the prediction of properties of the mitre joint. Tests were performed by using a universal tensile testing machine P-0.5. Joints were bonded by applying PVA dispersion. The surface of boards was veneered by using mahogany veneer and urea formaldehyde resin. It was found that mitre joints of wood particle boards can withstand loads that are higher from 2 to 4 times, in comparison to glued doweled joints or joints constructed with cam connecting fittings.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3095

  6. Attitudes of U.S. retailers toward China, Canada, and the United States as manufacturing sources for furniture: an assessment of competitive priorities

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Torsten Lihra; Mary Frye

    2006-01-01

    While much has been written regarding the declining global competitiveness of U.S. furniture manufacturing and the subsequent loss of domestic market share and jobs, less is known about the role of retailers in furniture importing. This study investigated the attitudes of U.S. furniture retailers toward China, Canada, and the United States as manufacturing sources for...

  7. Virtualization of Research Universities: Raising the Right Questions to Address Key Functions of the Institution. Research & Occasional Paper Series. CSHE.6.03

    Science.gov (United States)

    Pfeffer, Thomas

    2003-01-01

    The aim of this paper is to provide an overview of the variety of information and communication technology (ICT) applications at traditional universities and to integrate them into a holistic picture of the institution. Using the distinction of three key elements of scholarly activity (research, publication, education), it suggests a functional…

  8. Bibliometric analysis in the evaluation of journals published by the Forest Research Institute: Forest Research Papers and Folia Forestalia Polonica Series A – Forestry

    Directory of Open Access Journals (Sweden)

    Szewczykiewicz Joanna

    2017-06-01

    Full Text Available In recent years, there has been a significant increase in interest in publishing articles in journals recorded by global databases, in particular the Web of Science ™ Core Collection, which indexes journals found in the Journal Citation Reports. The publication of results in these journals has a significant impact on the assessment of the achievements of researchers and scientific institutions.

  9. Cancer in human immunodeficiency virus-infected children : A case series from the Children's Cancer Group and the National Cancer Institute

    NARCIS (Netherlands)

    Granovsky, MO; Mueller, BU; Nicholson, HS; Rosenberg, PS; Rabkin, CS

    Purpose: To describe the spectrum of malignancies in human immunodeficiency virus (HIV)-infected children and the clinical outcome of patients with these tumors. Methods: We retrospectively surveyed the Children's Cancer Group (CCG) and the National Cancer institute (NCI) for cases of cancer that

  10. Institutional Retention Strategies at Historically Black Colleges and Universities and Their Effects on Cohort Default Rates: 1987-1995. Monograph Series.

    Science.gov (United States)

    Galloway, Fred J.; Swail, Watson Scott

    This study analyzed institutional factors that significantly affect cohort default rates at historically black colleges and universities (HBCUs) and assessed the potential for reducing these rates. It has been hypothesized that the HBCUs most successful in lowering student cohort default rates are those that have also succeeded in increasing…

  11. 78 FR 8493 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2013-02-06

    ... business because it has English and French customers. Because of this, we will treat Foliot Furniture Inc... electronically via Import Administration's Antidumping and Countervailing Duty Centralized Electronic Service...://www.trade.gov/ia/ . The signed Preliminary Decision Memorandum and the electronic versions of the...

  12. Produce yellow-poplar furniture dimension at minimum cost by using YELLOPOP

    Science.gov (United States)

    David G. Marten; David G. Marten

    1986-01-01

    Describes a computer program called YELLOPOP that determines the least-cost combination of lumber grades required to produce a given cutting order of furniture dimension parts. If the least-cost mix is not available, YELLOPOP can be used to determine the next best alternative. The steps involved in using the program are also described.

  13. 76 FR 13667 - Commercial Furniture Group, Inc., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe...

    Science.gov (United States)

    2011-03-14

    ... Furniture Group, Inc., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe and Thonet, Including...., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe and Thonet, Chicago, IL; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of...

  14. Evaluation of service conditions of the machines within the furniture joinery

    Directory of Open Access Journals (Sweden)

    Łukasz Zalejski

    2015-12-01

    Full Text Available The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, characteristics of the Total Productive Maintenance (TPM rate, evaluation of the level of materialized technology using Parker's scale.

  15. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

    2012-06-01

    Full Text Available Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

  16. DEMONSTRATION OF NO-VOC/NO-HAP WOOD FURNITURE COATING SYSTEM

    Science.gov (United States)

    The United States Environmental Protection Agency has contracted with AeroVironment Environmental Services, Inc. and its subcontractor, Adhesives Coating Co., to develop and demonstrate a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating s...

  17. Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species.

    Science.gov (United States)

    David Nicholls; Matthew Bumgardner

    2007-01-01

    This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

  18. Ergonomic and Anthropometric Consideration for Library Furniture in an Iranian Public University

    Directory of Open Access Journals (Sweden)

    R Osquei-Zadeh

    2011-12-01

    Full Text Available Background: In our competing educational world, students spend a considerable part of their daily life, studying at library furniture. Not surprisingly, due to lack of proper anthropometric databases, these products have typically been ill fitted for the intended user populations. Objective: To verify the optimum anthropometric match of library furniture within an academic environment, through a combined qualitative and quantitative approach. Methods: 267 (120 female and 147 male students, were subjected to 11 standard anthropometric measurements. In line with the measurements, subjective evaluations were also considered through detailed fitting trials on selected groups of participants. Results: Combinational equations defined the unacceptable furniture dimensions according to elbow and sitting popliteal heights, mainly for smaller and taller divisions of the studied population, which were systematically comparable along with subjective and objective outcomes. In brief, if we classified studied students into “small,” “medium,” and “tall” groups, the design dimensions should be altered by -5.1, -2.2, and +1.6 cm for chair seat height; and by -8.3, -5.4, and +1.1 cm for table height, for each student group, respectively. Conclusion: The furniture size to be used by Iranian students should be changed to fit their anthropometric measures.

  19. Use of Computer Simulation in Designing and Evaluating a Proposed Rough Mill for Furniture Interior Parts

    Science.gov (United States)

    Philip A. Araman

    1977-01-01

    The design of a rough mill for the production of interior furniture parts is used to illustrate a simulation technique for analyzing and evaluating established and proposed sequential production systems. Distributions representing the real-world random characteristics of lumber, equipment feed speeds and delay times are programmed into the simulation. An example is...

  20. STUDY ABOUT A FURNITURE COMPANY THAT USES NEW TECHNOLOGIES AND COMPUTERIZED EQUIPMENT

    Directory of Open Access Journals (Sweden)

    PUSTIANU Monica

    2015-05-01

    Full Text Available In Romania, there are companies that uses new technologies and computerized equipment leading to obtaining high quality products and profit. Furniture industry has continuously developed due to high demand for diversified products for all age groups. Romanian goods shall be delivered both in the country and abroad. The tapestries furniture made in our country, classical or modern, by leather in different colours or with textile coating materials fashionable chosen is already enjoying much attention from the external and internal customers. The workforce employed in the furniture manufacturing industry is qualified, managed to shape the wood into complex and elegant products that are able to give full satisfaction to all consumers SWOT analysis is defined as a complex research of economic aspects, technical, sociological, legal and managerial aspects that characterize the activity of a company and allows the formulation of an opinion on the past and present condition of the company. SWOT analysis may be carried out both at the level of functional areas of the company: financial, commercial, production, human resources, research and development, management and at the level of firm as a whole. By this analysis was obtained a clear picture of the current state of the analysed company, helping to knowledge and understanding of the general context in which the company operates. Key words: quality, furniture, management, production, analysis, SWOT

  1. Marketing low-grade hardwoods for furniture stock - a new approach

    Science.gov (United States)

    Hugh W. Reynolds; Charles J. Gatchell

    1979-01-01

    A hardwood shortage of high-grade lumber exists while there is a surplus of low-grade hardwood timber. Two things are needed for the surplus to correct the shortage: a new manufacturing system and a new marketing technique. Utilization research at the Princeton Forestry Sciences Laboratory has developed the new system for converting low-grade hardwood for furniture use...

  2. Furniture and Equipment in Schools: A Purchasing Guide. Managing School Facilities, Guide 7.

    Science.gov (United States)

    Wadsworth, Alison

    This document offers advice on the processes that should be followed when schools in the United Kingdom buy their furniture and equipment (F&E). Sections 1 and 2 examine the first steps, prior to purchasing, such as curriculum analysis and market exploration; and sections 3 and 4 explore the importance of creating a clear specification for…

  3. Achievements of the ITB's--Furniture and Timber Industry Training Board

    Science.gov (United States)

    Industrial Training International, 1974

    1974-01-01

    The Furniture and Industry Training Board set out in 1965 to find a means of successfully implementing management training in small firms. The author describes research efforts undertaken by the Board which led to the development of the training program now in use--management development based on company appraisal. (AJ)

  4. NONPROCESS SOLVENT USE IN THE FURNITURE REFINISHING AND REPAIR INDUSTRY: EVALUATION OF ALTERNATIVE CHEMICAL STRIPPERS

    Science.gov (United States)

    The report gives results of an evaluation of the feasibility of using alternatives to high volatile organic compound/hazardous air pollutant (VOC/HAP) solvent-based, chemical strippers that are currently used in the furniture repair and refinishing industry to remove both traditi...

  5. Furniture and Timber Training Board, Fourth Year's Scheme; Training Grants Scheme, 1969-70.

    Science.gov (United States)

    British Furniture and Timber Training Board, Wembly (England).

    This booklet explains what training grants are offered by the Furniture and Timber Training Board of Great Britain, indicates how to claim them, and outlines the Board's training philosophy. Foldouts present conditions which apply in whole or in part to the Training Grants Scheme, followed by guidelines for completing forms. The main section…

  6. FINANCIAL LIQUIDITY OF THE FURNITURE INDUSTRY COMPANIES IN POLAND IN 2006–2013

    Directory of Open Access Journals (Sweden)

    Zbigniew Gołaś

    2015-12-01

    Full Text Available The aim of the study was to present the diversity and conditions of companies’ liquidity in the Polish furniture industry. In the analysis, the statistical data, CSO, 2006–2013 for the furniture manufacturing enterprise sector (Chapter 31 manufacturing, PKD 2007 was used. The carried out analysis showed that the furniture industry companies in Poland in the years 2006–2013 in general had the ability to meet their current liabilities. Current and quick liquidity developed for them on a stable and positive level, coinciding with the recommendations of the theory of fi nance. However, from the working capital cycle’s point of view, the assessment of liquidity furniture manufacturing sector is clearly less favourable, and it results from relatively long collecting dues cycles ranging close to 60 days. The less favourable assessment comes from the fact that the long collecting dues cycles have eff ects on exceeding duration of the recovery measures’ applications, which in turn, may turn into a build-up of the payment backlogs, and thus into reductions of the ability to fi nance business and into the risk of production’s reduction

  7. Learner Support Requirements for Online Workplace Training in the South African Furniture Industry

    Science.gov (United States)

    MacDonald, Iain S.; Bullen, Mark; Kozak, Robert A.

    2010-01-01

    A qualitative research project was conducted to evaluate the suitability of e-learning as a means of delivering training to workplace learners in the South African furniture manufacturing sector. Twenty learners participated in a three-month pilot e-learning course and were monitored throughout. While the study was designed primarily to…

  8. THE PARTICULARITIES OF THE COST CALCULATION METHOD ON COMMANDS IN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Felicia Sabou

    2014-10-01

    Full Text Available The paper present the importance of the method on commands in cost calculation and the particularities of the cost calculation method on commands in the furniture industry. This paper presents a hypotetical study on the method on commands, considering the observations made during 2013-2014, on how it is organized and managed accounts management using method on commands.By presenting this hypothetical model about the accounting in management accounting using the method on commands, the paper contributes to the correct application of this method in practice, specifically in management accounting in companies from the furniture industry. In my opinion the method on commands is an appropriate method for achieving management accounting for companies that have as main activity the production of furniture. When applying the method on commands in cost calculation and in management accounting, the companies must to consider the particularities of the cost calculation, in the furniture industry, like: technical and economic factors from this sector, the technical details of each command, the codification of the commands, planning materials and labor costs for each command, monitoring and recording production costs, registration of the direct costs, distribution of the indirect costs on commands, registration of the indirect costs and registration in management accounting.

  9. POLLUTION PREVENTION CASE STUDIES: LOW-VOC/HAP WOOD FURNITURE COATINGS

    Science.gov (United States)

    This article provides a brief profile of the wood furniture industry, discusses pollution prevention activities typically implemented, describes the four low-VOC/HAP coating technologies studied. and summarizes one case study for each of the low-VOC/HAP coating yechnologies inves...

  10. FEA analysis and design optimization for a multifunctional piece of furniture

    Directory of Open Access Journals (Sweden)

    Haraga Georgeta

    2017-01-01

    Full Text Available The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with a solid modelling for the creation of the desired piece of multifunctional furniture is used in this case, the automatic generation of the finite element meshes. Getting more accurate results for the mesh refinement process can be made by changing parameters. The article outlines the developed model for analysing the supporting structure of the armchair. This model provides simulating of the different loads and checking the raised stresses and deformation in the structures analysed. The main objective of this research is to evaluate strength of wooden cedar armchair for a person weighing 140 kg and for this the finite element analysis (FEA has been used. Multifunctional furniture is the answer to the challenges contemporary lifestyle, creativity in design activities that require optimal space utilization and reducing costs.

  11. Categorical ERP Repetition Effects for Human and Furniture Items in 7-Month-Old Infants

    Science.gov (United States)

    Peykarjou, Stefanie; Wissner, Julia; Pauen, Sabina

    2017-01-01

    Behavioural and recent neural evidence indicates that young infants discriminate broad stimulus categories. However, little is known about the categorical perception of humans represented as full bodies with heads and their discrimination from inanimate objects. This study compares infants' brain processing of human and furniture pictures, probing…

  12. Performance of Color Camera Machine Vision in Automated Furniture Rough Mill Systems

    Science.gov (United States)

    D. Earl Kline; Agus Widoyoko; Janice K. Wiedenbeck; Philip A. Araman

    1998-01-01

    The objective of this study was to evaluate the performance of color camera machine vision for lumber processing in a furniture rough mill. The study used 134 red oak boards to compare the performance of automated gang-rip-first rough mill yield based on a prototype color camera lumber inspection system developed at Virginia Tech with both estimated optimum rough mill...

  13. U.S. Competitiveness Study: How Furniture and Cabinet Manufacturers Compare

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Al Schuler; Rich Christianson

    2003-01-01

    A disturbing 37.2%, of the 341 manufacturing executives participating in the U.S. Wood Competitiveness Survey either strongly agreed or agreed "that by the end of the decade, little will remain of domestic wood furniture and other wood products manufacturing in the United States."

  14. 78 FR 13626 - Wooden Bedroom Furniture From the People's Republic of China: Initiation of Administrative Review

    Science.gov (United States)

    2013-02-28

    .... Shanghai Fangjia Industry Co., Ltd.... No. Shanghai Hospitality Product Mfg., No. Co., Ltd. Shanghai... Co., Ltd., Artwork Metal & Plastic Co., Ltd., Jibson Industries Ltd., Always Loyal International.... Taicang Sunrise Wood Industry Co., Ltd., Taicang Fairmount Designs Furniture Co., Ltd., Meizhou Sunrise...

  15. 75 FR 9869 - Initiation of Administrative Review of the Antidumping Duty Order on Wooden Bedroom Furniture...

    Science.gov (United States)

    2010-03-04

    ... Plastic Co., Ltd.,* Jibson Industries, Ltd.,* Always Loyal International * Baigou Crafts Factory of... Faith Limited * Brother Furniture Manufacture Co., Ltd. * C.F. Kent Co., Inc. C.F. Kent Hospitality, Inc... Company Limited * Dongguan Chunsan Wood Products Co., Ltd.,* Trendex Industries Ltd.* [[Page 9872...

  16. A research on the preferences of material and size in the Turkish kitchen furniture industry

    Directory of Open Access Journals (Sweden)

    Tuncer Dilik

    2017-11-01

    Full Text Available This study intended to investigate the interaction developing rapidly through the impact of globalization experienced in every field on the material and size preferences of the kitchen furniture sector. The results of the survey conducted on the Turkish kitchen furniture manufacturers were evaluated within the framework of the international kitchen trends. As a result it was seen that the most preferred kitchen area was between 8 and 11 m2 regarding the distribution of the kitchen areas in Turkey. A tendency of using MDF in the production of the kitchen cabinets was observed with 61.8% in relation with the body material preferred to be used in the kitchen furniture sector. The preferred body sizes of the kitchen cabinet was determined by considering the width and height preferences of both the upper and lower cabinets, the size of 61-90 cm seemed to be the most preferred sizes both for the upper and lower cabinets. According to the height, 72 cm size was found to be the most preferred size. While the most preferred size among the cellar cabinets was determined to be smaller than 60 cm, its height was revealed to be bigger than 200 cm. The most preferred kitchen furniture base was detected to be 12 cm.

  17. Analysis of ergonomic furniture made of wood and sub-products from renewable forests.

    Science.gov (United States)

    de Oliveira, Luciana Aparecida; de Souza, Amaury Paulo; Fialho, Patrícia Bhering; Minette, Luciano José; de Torres, Fernanda Freitas Costa

    2012-01-01

    The furniture ergonomic evaluation was carried out through the use of questionnaires and forms in industries. For the ergonomic product analysis, it was used the methodology "Object Ergonomics - Ergonomic System Technical Reading" (design goals and management actions), and measurements of products. The values achieved were compared with the standard dimensions, and the compliance or non-compliance of the furniture to it was assessed. In relation to the dimensions of the bed, the following variables did not comply with the norms: external and internal length, external and internal width, height and width of the sidebar and distance to the floor. The dimensions of these variables were above the recommended values. The double bed was inadequate for management actions and maintenance. Since the kitchen cabinet is a product that went through physical testing and follows national standards; the finish used is powder coating. The kitchen cabinet proved to be appropriate in all design requirements and for management actions. Both furniture pieces were inadequate, considering the difficulty for maintenance when a product or part of it was damaged. It was recommended the creation of regulatory standards for the production of safe and comfortable furniture.

  18. Bending stress modeling of dismountable furniture joints applied with a use of finite element method

    Directory of Open Access Journals (Sweden)

    Milan Šimek

    2009-01-01

    Full Text Available Presented work focuses on bending moment stress modeling of dismountable furniture joints with a use of Finite Element Method. The joints are created from Minifix and Rondorfix cams combined with non-glued wooden dowels. Laminated particleboard 18 mm of thickness is used as a connected material. The connectors were chosen such as the most applied kind in furniture industry for the case furniture. All gained results were reciprocally compared to each other and also in comparison to experimental testing by the mean of stiffness. The non-linear numerical model of chosen joints was successfully created using the software Ansys Workbench. The detailed analysis of stress distribution in the joint was achieved with non-linear numerical simulation. A relationship between numerical si­mu­la­tion and experimental testing was showed by comparison stiffness tangents. A numerical simulation of RTA joint loads also demonstrated the important role of non-glued dowels in the tested joints. The low strength of particleboard in the tension parallel to surface (internal bond is the most likely the cause of the joint failure. Results are applicable for strength designing of furniture with the aid of Computer Aided Engineering.

  19. Bellus Furniture lõi edetabelis platsi puhtaks võimsa kasvuga / Aarne Mäe

    Index Scriptorium Estoniae

    Mäe, Aarne, 1967-

    2006-01-01

    Äripäeva koostatud Lääne-Viru ettevõtjate TOP-is troonis esikohal Haljalas tegutsev pehmemööbli firma Bellus Furniture, järgnesid Vest-Woodi puidutööstus Rakveres ja Kunda tsemenditehas. Lisa: Pingerida

  20. Explaining the Criteria of Designing Urban Furniture and Landscape, with a Cultural-social Design Approach

    Directory of Open Access Journals (Sweden)

    Marzieh Allahdadi

    2017-09-01

    Full Text Available Attention to the deep relationship between human personality and the place in which he lives causes the place to play a crucial role in cultural transformations and prevalence of human life style and formation of values, connections and human activities. Cities are not just a place of transit, but they are also environments that must have mutual communications with the inhabitants in order to realize the meaning of citizen, as there is a distinction between the status of citizenship and urbanization. Urban furniture is one of the elements of urban space that its quantity, beauty and durability play a major role in achieving a healthy and favorable city and satisfies the needs of citizens in terms of performance and beauty. Accordingly, the present study, using descriptive-analytical method and with data collection tools including library and documentary studies, examines the concept of product ecology and answers to the questions whether urban furniture can start or support social interaction or positively affect the roles of citizens? In this paper, the relationship between social-cultural design in urban furniture and the disturbances regarding uneven distribution of elements are identified, and finally the criteria of designing urban furniture and landscape are expressed with a social-design approach.

  1. Global Market Access in the Internet Era: South Africa's Wood Furniture Industry.

    Science.gov (United States)

    Moodley, Sagren

    2002-01-01

    Explores the link between Internet connectivity and access to global markets, and uses the South African wood furniture producers as they are integrated into global value chains and exposed to the demands of more sophisticated markets. Articulates policy recommendations to promote greater diffusion of e-commerce technologies in the wood furniture…

  2. A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

    Directory of Open Access Journals (Sweden)

    Siti Suhaily,

    2012-07-01

    Full Text Available This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and technology. This research also discusses the need for biocomposite materials that do not depend on the growth of populations, but on the growth and development of the economy. This study focuses on globally available agro-based biocomposites, especially those from oil palm biomass: plywood, medium density fiberboard (MDF, wood plastic composite (WPC, laminated veneer lumber (LVL, oriented strand board (OSB, hardboards, and particleboard. Additional positive aspects of biocomposites are their environmentally friendly character, high quality, competitive design, and capacity to improve the value proposition of high-end products. These attributes increase the demand for agro-based biocomposite furniture on the international market.

  3. Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

    Science.gov (United States)

    Shirk, Gary M.

    1984-01-01

    Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

  4. Utilization of Anthropometry in the Sphere of Sitting and Bed Furniture

    Directory of Open Access Journals (Sweden)

    Kateřina Dvouletá

    2014-01-01

    Full Text Available Dimensions of furniture shall respond to current anthropometrical dimensions and ergonomic requirements which are recommended typological group of products. With relevance to the changes of population’s height and enlargement of body proportions (according to the last measuring from 1985, it is necessary to revise the majority of dimensions of human – furniture and standards (based on updated measuring of 375 men and women. The proper furniture designing will be dependent on that.The aim is a statistical evaluation of data from the anthropometrical measuring, acquired within the NIS grant and creating optimal dimensions of sitting and lying furniture so that they respond to the needs of current population. Graphical simulations created in ergonomic software Tecnomatix Jack are intended to illustrate the dimension requirements. The result are processed in a form of charts which are classified XS–XL. The outputs are compared to data in professional literature and standards. According to preliminary results, the optimal dimensions were designed and those will be further specified and verified. For future, it will be necessary to state the dimensions approximatively to expected population growth.

  5. Development of Modular Outdoor Furniture Product Using Lightweight Concrete for Public Parks in Surabaya

    Science.gov (United States)

    Mulyono, Grace; Thamrin, Diana; Antoni

    2017-09-01

    The development of public parks into green city facilities in Surabaya has triggered the need of outdoor furniture designs that can resist the tropical wet and dry weather conditions while also having a certain mobility to support flexible park arrangement. However, present furniture designs made of concrete material are generally heavy and immovable. Flexible designs are needed for various activities that can take place at the same time such as sitting and playing, and to support changes in arrangement to keep the green open spaces attractive from time to time. This research develops the idea of a modular outdoor furniture design using cellular lightweight concrete (CLC) as the main material as a result from observing its resistance towards weather change and its relative light weight. It starts with analysis of problems, formulation of design concept, creation of design alternatives, selection of design, calculation of mouldings, adaptation of design to the mouldings and production of a scaled mock-up using CLC. Findings of this research reveal that the modular design along with the CLC material used not only support the flexibility of change in function and arrangement but also make these furniture resistant to the hot and humid weather of Surabaya.

  6. Wood Dust in Joineries and Furniture Manufacturing : An Exposure Determinant and Intervention Study

    NARCIS (Netherlands)

    Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

    Objectives: To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop,

  7. Evaluation of service conditions of the machines within the furniture joinery

    OpenAIRE

    Łukasz Zalejski; Noga Mariusz; Wojtysiak Marcin; Foszmanowicz Krzysztof

    2015-01-01

    The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, characteristics of the Total Productive Maintenance (TPM) rate, evaluation of the level of materialized technology using Parker's scale.

  8. Ergonomic and anthropometric consideration for library furniture in an Iranian public university.

    Science.gov (United States)

    Osquei-Zadeh, R; Ghamari, J; Abedi, M; Shiri, H

    2012-01-01

    In our competing educational world, students spend a considerable part of their daily life, studying at library furniture. Not surprisingly, due to lack of proper anthropometric databases, these products have typically been ill fitted for the intended user populations. To verify the optimum anthropometric match of library furniture within an academic environment, through a combined qualitative and quantitative approach. 267 (120 female and 147 male) students, were subjected to 11 standard anthropometric measurements. In line with the measurements, subjective evaluations were also considered through detailed fitting trials on selected groups of participants. Combinational equations defined the unacceptable furniture dimensions according to elbow and sitting popliteal heights, mainly for smaller and taller divisions of the studied population, which were systematically comparable along with subjective and objective outcomes. In brief, if we classified studied students into "small," "medium," and "tall" groups, the design dimensions should be altered by -5.1, -2.2, and +1.6 cm for chair seat height; and by -8.3, -5.4, and +1.1 cm for table height, for each student group, respectively. The furniture size to be used by Iranian students should be changed to fit their anthropometric measures.

  9. Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species

    Science.gov (United States)

    David Nicholls; Matthew Bumgardner

    2007-01-01

    This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

  10. Factors and methods of analysis and estimation of furniture making enterprises competitiveness

    Directory of Open Access Journals (Sweden)

    Vitaliy Aleksandrovich Zhigarev

    2015-06-01

    Full Text Available Objective to describe the author39s methodology for estimating the furnituremaking enterprises competitiveness with a view to carry out the economic evaluation of the efficiency of furniture production the evaluation of the internal component of the furniture production efficiency the identification of factors influencing the efficiency of furnituremaking companies and areas for improving it through improvements in product range production and sales policy of the enterprise. The research subject is modern methods and principles of competitiveness management applicable in a rapidly changing market environment. Methods in general the research methodology consists of six stages differentiated by methods objectives and required outcomes. The first stage of the research was to study the nature of demand within the target market of a furnituremaking enterprise. The second stage was to study the expenditures of a furnituremaking enterprise for implementing individual production and sales strategies. The third stage was to study competition in the market. The fourth stage was the analysis of possibilities of a furnituremaking enterprise in producing and selling furniture in terms of factor values combinations. The fifth stage was the reexamination of the demand with a view to its distribution according to the factor space. The final sixth stage was processing of data obtained at the previous stages and carrying out the necessary calculations. Results in general the above methodology of economic evaluation of the efficiency of furniture production based on the previously developed model gives the managers of enterprises an algorithm for assessing both market and firmlevel component of the furniture production efficiency allowing the subsequent identification and evaluation of the efficiency factors and the development of measures to improve the furniture production and sale efficiency as well as the assortment rationalization production and sales policy

  11. Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP

    Directory of Open Access Journals (Sweden)

    Hasan Alizadeh

    2014-11-01

    Full Text Available Furniture industry is one of the most important employment and wealth productive industries, and also one major category in developing countries. This study aimed on determining the effective indices on export development of office furniture throughout the analytical hierarchy process (AHP and also by group decision. For this, imports and exports of office furniture were determined through visiting the custom office of Islamic Republic of Iran. By then, after initial studies, furniture industry and relevant experts were interviewed to recognize the effective indices on export development, and specified indices were categorized on six main groups and forty-eight sub-index. After receiving the comments of experts, degree of importance of indices and sub-indices determined thereby Expert Choice software. Results showed that raw material and product has been chosen among the major indices. Among the 48 influential sub-indices also product designing, guaranty and costumer services, quality control, custom tariffs, and strategic marketing had highest value-weighted priorities in export development of office furniture, respectively. Regarding to government’s policies and decisions in wood raw materials extent, monetary and banking system and marketing infrastructures, to maintain the productivity competitiveness of Iran’s furniture industry in first step, and to achieve to the export markets in second step, full cooperation of government with furniture industry is necessary provision for participating of this industry in global markets.

  12. Anthropometric evaluation and recommendation for primary schools classroom furniture design in Perlis

    Science.gov (United States)

    Shan, Lim Shaiu; Jing, Ewe Hui; Effendi, M. S. M.; Rosli, Muhamad Farizuan

    2017-09-01

    This study was carried out with the objective to obtain the anthropometric data of primary school children from Year 1 to Year 6 and evaluate the children's anthropometry with the current dimensions of classroom furniture (i.e. chair and table). In addition, this study also proposed the design dimensions for the improvement in classroom furniture design with the consideration of children's anthropometric data. A total of 390 children selected from 13 primary schools in Perlis, Malaysia were participated in this study. There were 11 anthropometric measurements of children have been measured in this study, which include stature (St), popliteal height (PH), knee height (KH), thigh thickness (TT), buttock popliteal length (BPL), hip breadth (HB), sitting shoulder height (SSH), sitting elbow height (SEH), forearm-hand length (FHL), height of lumbar point (HLP) and buttock clearance (BC). Besides that, 7 dimensions relating to current classroom chair have been measured, such as seat height (SH), seat depth (SD), seat width (SW), upper edge of backrest (UEB), lower edge of backrest (LEB), S point (SP), overall chair height (OCH). Another 5 dimensions of the existing classroom table have been measured too, which involve table height (TH), table depth (TD), table width (TW), under table height (UH) and seat to table clearance (STC). All the measurements were performed by using metal measuring tape. The anthropometric data of the children were analyzed with the help of Microsoft Excel 2013. Several equations with associated with the anthropometric data and furniture dimensions have been applied in this research. The new design dimensions for classroom furniture that proposed in this paper which based on the collected anthropometric data can be referred as a guideline for classroom furniture design. The implementation of these data may help to create comfortability, safety, suitability and improve performance of children in the classroom.

  13. Wood Identification of 18th Century Furniture. Interpreting Wood Naming Inventoires

    Directory of Open Access Journals (Sweden)

    Rocio Astrid BERNAL

    2011-09-01

    Full Text Available The 18th century Portuguese church furniture represents an extraordinary richness recognised worldwide, which demands safeguarding and valorisation. The identification of the wood of furniture artworks is the most important component for its comprehension and preservation. In this work wood anatomical characters of an 18th century Portuguese decorative furniture set from the Colegiada de São Martinho de Cedofeita, in Porto, were analysed to identify the woods used for manufacturing and to clarify their common names. Furthermore, the objectives were to recognise some of the criteria for choice of wood as well as the source of each wood. The woods identified from 16 fragments belong to Apuleia sp., Acacia sp., Neolamarckia sp. and Castanea sativa. Apuleia sp. and Acacia sp. woods most likely arrived from Brazil, while the Neolamarckia sp. woods likely arrived from India and the C. sativa woods from Portugal. The results are in accordance with the known Portuguese colonial sea routes of the 15th -18th centuries. Interestingly the terms found in the inventories can refer to finishing methods instead to the name of the woods, as for instance “oil wood” can refer to “oiled wood” or “linseed oiled wood”. The species choice may be related to the mechanical properties of the wood as well as the original tree size. Two large planks of Acacia sp. were used for the top of the “Portuguese arcaz”, and Apuleia sp. was found on main structural elements of this set of furniture, suggesting that wood colour was also important. Woods from Neolamarckia sp. and C. sativa, were also identified, being Castanea wood present only in the most recent pieces of the furniture set.

  14. The Level of Utilization of Secondary Timber Species among Furniture Producers

    Directory of Open Access Journals (Sweden)

    Charles Antwi-Boasiako

    2016-06-01

    Full Text Available Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and Methods: Data were collected from 300 Timber Firms from Ghana primarily through questionnaires using the stratified random sampling technique. Results: Continuous decline and non-availability of preferred traditional timbers and competition from imported furniture were the main challenges confronting the furniture industry. Data obtained indicated that most manufacturers (85% hardly use any LUS; 44% of these mentioned lack of information on their properties and prospective uses and 32% attributed it to non-availability on the domestic timber markets. However, 22% of these producers rely on traditionally ‘well-known’ timbers (e.g. mixed red wood, Guarea cedrata and Tectona grandis owing to their strength properties, 20% due to their strength and durability and 14% because of their strength and aesthetic properties. Many LUS (with prospects for furniture-making available in great quantities in many tropical forests could substitute the over-dependent timbers. However, information on their properties and uses are hardly available to local producers, which affects their popularity among timber suppliers and manufacturers. Conclusion: To improve on the level of utilization of secondary timbers, wood workers must be supplied with comprehensive information about their properties and economic values. This will contribute to reducing pressure on the primary timbers, ensuring consistent supply of timber and keeping the sector operational.

  15. Wood Dust in Joineries and Furniture Manufacturing: An Exposure Determinant and Intervention Study.

    Science.gov (United States)

    Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

    2017-05-01

    To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop, implement, and evaluate a cost-effective and practicable intervention to reduce dust exposures. Personal inhalable dust (n = 201) was measured in 99 workers from 10 joineries and 3 furniture-making factories. To assess exposure determinants, full-shift video exposure monitoring (VEM) was conducted in 19 workers and task-based VEM in 32 workers (in 7 joineries and 3 furniture factories). We assessed the efficacy of vacuum extraction on hand tools and the use of vacuum cleaners instead of sweeping and dry wiping under laboratory conditions. These measures were subsequently implemented in three joinery workshops with 'high' (>4 mg m-3) and one with 'low' (joinery and furniture making were 2.5 mg m-3 [geometric standard deviations (GSD) 2.5] and 0.6 mg m-3 (GSD 2.3), respectively. In joinery workers cleaning was associated with a 3.0-fold higher (P joineries, a borderline statistically significant (P joinery workers and (to a lesser extent) furniture makers with frequent use of hand tools and cleaning being key drivers of exposure. Vacuum extraction on hand tools and alternative cleaning methods reduced workplace exposures substantially, but may be insufficient to achieve compliance with current occupational exposure limits. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  16. Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

    Science.gov (United States)

    Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur

    2015-01-01

    Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children’s age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6–9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children’s ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement. PMID:26053154

  17. Changes and development of product line : Case: P. Rotola-Pukkila Oy's products, furniture trends and competitors

    OpenAIRE

    Rotola-Pukkila, Ida

    2016-01-01

    The purpose of this thesis is to study what kinds of changes and developments have been done in furniture manufacturer P. Rotola-Pukkila Oy’s Timantti and Laatupaneeli products and colour options between the years 1970−2016. Another objective is to study the trends on furniture and interior design field, as well as to study how the company’s products compete on the market. Concepts related to company’s history, products, collections and colour options as well as the history of furniture f...

  18. Magnitude and Causes of Low Vision Disability (Moderate and Severe Visual Impairment) among Students of Al-Noor Institute for the Blind in Al-Hassa, Saudi Arabia: A case series.

    Science.gov (United States)

    Al-Wadani, Fahad; Khandekar, Rajiv; Al-Hussain, Muneera A; Alkhawaja, Ahmed A; Khan, Mohammed Sarfaraz; Alsulaiman, Ramzy A

    2012-02-01

    This study aimed to estimate the magnitude and causes of low vision disability (severe visual impairment [SVI] and moderate visual impairment [MVI]) among students at Al-Noor Institute for the Blind (NIB) in Al-Hassa, Saudi Arabia in 2006. An optometrist conducted refraction of 122 eyes of the 61 students (27 boys and 34 girls) with MVI (vision visual acuity was ≥6/18 and in 28 (23%) eyes, it was visual impairment in 16 (13.1%) and 9 (7.4%) eyes. These students were prescribed optical and non-optical low vision aids. Retinal disease was the main cause of SVI and MVI in our series. Some students at Al-Noor Institute for the Blind have curable low vision conditions. Rehabilitation of low vision disability should be different from that offered to the absolutely blind.

  19. Complications and Short-Term Explantation Rate Following Artificial Urinary Sphincter Implantation: Results from a Large Middle European Multi-Institutional Case Series.

    Science.gov (United States)

    Kretschmer, Alexander; Hüsch, Tanja; Thomsen, Frauke; Kronlachner, Dominik; Obaje, Alice; Anding, Ralf; Pottek, Tobias; Rose, Achim; Olianas, Roberto; Friedl, Alexander; Hübner, Wilhelm; Homberg, Roland; Pfitzenmaier, Jesco; Grein, Ulrich; Queissert, Fabian; Naumann, Carsten Maik; Schweiger, Josef; Wotzka, Carola; Nyarangi-Dix, Joanne N; Hofmann, Torben; Seiler, Roland; Haferkamp, Axel; Bauer, Ricarda M

    2016-01-01

    Background/Aims/Objectives: To analyze perioperative complication and short-term explantation rates after perineal or penoscrotal single-cuff and double-cuff artificial urinary sphincter (AUS) implantation in a large middle European multi-institutional patient cohort. 467 male patients with stress urinary incontinence underwent implantation of a perineal single-cuff (n = 152), penoscrotal single-cuff (n = 99), or perineal double-cuff (n = 216) AUS between 2010 and 2012. Postoperative complications and 6-month explantation rates were assessed. For statistical analysis, Fisher's exact test and Kruskal-Wallis rank sum test, and a multiple logistic regression model were used (p AUS, penoscrotal single-cuff implantation led to significantly increased short-term explantation rates (8.6% (perineal) vs. 19.2% (penoscrotal), p = 0.019). The postoperative infection rate was significantly higher after double-cuff compared to single-cuff implantation (6.0% (single-cuff) vs. 13.9% (double-cuff), p = 0.019). The short-term explantation rate after primary double-cuff placement was 6.5% (p = 0.543 vs. perineal single-cuff). In multivariate analysis, the penoscrotal approach (p = 0.004), intraoperative complications (p = 0.005), postoperative bleeding (p = 0.011), and perioperative infection (p < 0.001) were independent risk factors for short-term explantation. Providing data from a large contemporary multi-institutional patient cohort from high-volume and low-volume institutions, our results reflect the current standard of care in middle Europe. We indicate that the penoscrotal approach is an independent risk factor for increased short-term explantation rates. © 2016 S. Karger AG, Basel.

  20. Identification, Analysis, Modeling and Prediction of Time Series Characterizing the Indicators of Asset Structure in the Credit Institutions Operating in Romania

    Directory of Open Access Journals (Sweden)

    Daniel CALINICA

    2012-08-01

    Full Text Available This paper aims to accurately characterize the dynamics of the structural indicators of the assets in the credit institutions operating in Romania through an empirical mathematical model of dual function: regulation and control. The model can be used to predict the future evolution of the economic processes involved, or to study how to act upon them (management in case of changes in the environment around them (e.g. the impact of reducing the minimum compulsory reserve requirements on credit etc.

  1. 76 FR 9747 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2011-02-22

    ..., stand-up desks, computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

  2. Assessing the match between female primary students’ anthropometric dimensions and furniture dimensions in Hamadan schools in 2013

    Directory of Open Access Journals (Sweden)

    R. Heidarimoghadam

    2015-04-01

    Conclusion: Despite differences in the body dimensions of primary school students, there is no regularity in using of school furniture. Overall, the dimensions of existing benches and desks are not matched with the anthropometric dimensions of students.

  3. The furniture of the library of the Glasgow School of Art by Charles Rennie Mackintosh (1868-1928) [dissertation

    OpenAIRE

    Bell, John; Bell, Simon

    1991-01-01

    This dissertation, which encompasses the set of furniture and light fittings designed for use in Glasgow School of Art library has been produced in response to the desire for the complete recording and analysis of that space.

  4. Reviving a Community, Modernizing an Industry: Ireland's Furniture College.

    Science.gov (United States)

    Regional Technology Strategies, Inc., Carrboro, NC.

    Connemara, a rural region in Ireland, is characterized by high unemployment, high emigration, poor infrastructure, inadequate public services, and a low rate of transfer to third-level education. To address the situation, the Galway-Mayo Institute of Technology (GMIT), joined forces with Connemara West (a community-owned development organization…

  5. STRUCTURAL EFFECTS AND MUTATIONS CAUSED BY THE ECONOMIC CRISIS ON FURNITURE TRADE AT THE EUROPEAN UNION LEVEL

    OpenAIRE

    Radu Marginean

    2013-01-01

    The global economic crisis had most negative effects on the entire economic sphere and especially in what the consuming industry is concerned, which may be considered “luxurious”, the way in which we may talk about the furniture industry. Along times of economic crisis at social level, a decrease in financial power at microeconomic, individual level is felt. Under conditions of social decrease in buying capacity, the request for commercial furniture is in rapid fall and thus the industry as s...

  6. Intensity-modulated radiotherapy using simultaneous-integrated boost for definitive treatment of locally advanced mucosal head and neck cancer: outcomes from a single-institution series

    International Nuclear Information System (INIS)

    Johnston, Meredith; Guo, Linxin; Hanna, Catherine; Back, Michael; Guminski, Alex; Lee, Adrian; Eade, Thomas; Veivers, David; Wignall, Andrew

    2013-01-01

    The study aims to report outcomes for patients treated using intensity-modulated radiotherapy (IMRT) with simultaneous-integrated boost and weekly cisplatin for American Joint Committee on Cancer stage III/IV mucosal head and neck squamous cell carcinomas (HNSCCs). Records for 67 patients treated definitively with IMRT for HNSCC were reviewed. By including only those treated with weekly cisplatin, 45 patients were eligible for analysis. Treatment outcomes, effect of patient, tumour and treatment characteristics on disease recurrence were analysed. All patients completed IMRT to 7000cGy in 35 fractions, with concurrent weekly cisplatin 40mg/m 2 (median 6 cycles). Median follow-up was 28 months for living patients. Two-year loco-regional recurrence-free, metastasis-free and overall survival were 85.4, 81.0 and 87.4%, respectively. Local recurrence occurred in three patients, and distant recurrence in eight patients. Our results show efficacy of IMRT and weekly cisplatin in the treatment of stage III/IV HNSCC at our institution with respect to loco-regional control.

  7. The strategic positioning as determining of the future of a furniture industry: education case

    Directory of Open Access Journals (Sweden)

    Cleber da Costa Webber

    2016-12-01

    Full Text Available This case presents a turning-point in the history of the company Expolight, a family company that is several years in the market working in the commercial furniture segment. In the state of Rio Grande do Sul, which is one of the leading furniture manufacturers poles of Brazil, being the products of this region recognized for their high quality. The case presents a decision point where the company needs to choose between keeping their market position, or accept the challenge of a new client, taking into consideration the investments and risks involved. The purpose of this Educational Case is to promote discussion and reflection on topics such as entrepreneurship, strategic management, innovation management and marketing, exercising decision-making based on the data presented. It also has element to the debate on globalization, partnerships and organizational culture.

  8. Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed.

    Science.gov (United States)

    Heo, Hyeon Su; Park, Hyun Ju; Park, Young-Kwon; Ryu, Changkook; Suh, Dong Jin; Suh, Young-Woong; Yim, Jin-Heong; Kim, Seung-Soo

    2010-01-01

    The amount of waste furniture generated in Korea was over 2.4 million tons in the past 3 years, which can be used for renewable energy or fuel feedstock production. Fast pyrolysis is available for thermo-chemical conversion of the waste wood mostly into bio-oil. In this work, fast pyrolysis of waste furniture sawdust was investigated under various reaction conditions (pyrolysis temperature, particle size, feed rate and flow rate of fluidizing medium) in a fluidized-bed reactor. The optimal pyrolysis temperature for increased yields of bio-oil was 450 degrees C. Excessively smaller or larger feed size negatively affected the production of bio-oil. Higher flow and feeding rates were more effective for the production of bio-oil, but did not greatly affect the bio-oil yields within the tested ranges. The use of product gas as the fluidizing medium had a potential for increased bio-oil yields.

  9. The Creation Of Furniture Products Design From Stem Waste Of Sugar Palm Tree (Arenga Pinnata

    Directory of Open Access Journals (Sweden)

    I Wayan Seriyoga Parta

    2017-11-01

    Full Text Available Sugar Palm tree (Arenga Pinnata is one of potential natural resources that can be used as a based material of furniture products. But, this sugar palm tree potential hasn’t exploited maximally and only throws away as a waste that contaminates the environment. On the other side, woods that have been used as based material of furniture products are getting rare and expensive. Based on that problem, this research is aimed to design new furniture products models that exploite the stem waste as a prominent based material.  This research uses experiment method with steps: 1 finding and formulating concepts of furniture products design creation based on analysis towards the stem waste of sugar palm tree characteristics; 2 implementing of finding concepts to become furniture products models from stem waste of sugar palm tree. As a result of the research, it is found “tube” concept and tatah carved concept as a right concept to be applied in creation of furniture products from stem waste of sugar palm tree. Implementing of “tube” concept and tatah carved concept is made successfully in shape of some furniture products design such as:  table model, chair model and wardrobe model. Realization of these designs has concerned with the use of sugar palm tree as a prominent based material. According to the result of evaluation, all of these designs are deserved to be made. So, it is concluded that to anticipate the qualified wood as a based material of furniture products, we can use stem waste of sugar palm tree as alternative based material. Pohon aren (Arenga Pinnata merupakan salah satu sumber daya alam yang potensial digunakan sebagai bahan baku produk mebel. Akan tetapi, potensi batang pohon aren itu belum dimanfaatkan secara maksimal dan hanya terbuang menjadi limbah yang mengotori lingkungan. Di sisi lain, kayu yang selama ini dimanfaatkan sebagai bahan baku produk mebel keberadaannya makin langka dan mahal. Bertolak dari permasalahan itu

  10. Assessment of Dust Emission and Working Conditions in the Bamboo and Wooden Furniture Industries in Malaysia

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2015-12-01

    Full Text Available A study was carried out to assess the dust emission and working conditions in the bamboo and rubberwood furniture manufacturing industries in Malaysia. The emission of wood dust arising from these industries was measured in each main work station in the mills. Meanwhile, a questionnaire-based survey was conducted among 5900 workers in 45 companies to obtain information on the occupational accidents that occurred in the mills. The data were collected, compiled, and analyzed using the SPSS package. The highest dust emission from the sanding operation resulted in respiratory ailments among workers. The occurrence of injuries particularly to the hand, wrist, fingers and forearm was due to the prevailing working conditions, safety climate and workers characteristics. The dust exposure levels and working conditions were much more severe in the bamboo furniture manufacturing industry. As a result, a review of existing of dust exposure levels in the woodworking industry is warranted.

  11. [The application of two occupation health risk assessment models in a wooden furniture manufacturing industry].

    Science.gov (United States)

    Wang, A H; Leng, P B; Bian, G L; Li, X H; Mao, G C; Zhang, M B

    2016-10-20

    Objective: To explore the applicability of 2 different models of occupational health risk assessment in wooden furniture manufacturing industry. Methods: American EPA inhalation risk model and ICMM model of occupational health risk assessment were conducted to assess occupational health risk in a small wooden furniture enterprises, respectively. Results: There was poor protective measure and equipment of occupational disease in the plant. The concentration of wood dust in the air of two workshops was over occupational exposure limit (OEL) , and the C TWA was 8.9 mg/m 3 and 3.6 mg/m 3 , respectively. According to EPA model, the workers who exposed to benzene in this plant had high risk (9.7×10 -6 ~34.3×10 -6 ) of leukemia, and who exposed to formaldehyde had high risk (11.4 × 10 -6 ) of squamous cell carcinoma. There were inconsistent evaluation results using the ICMM tools of standard-based matrix and calculated risk rating. There were very high risks to be attacked by rhinocarcinoma of the workers who exposed to wood dust for the tool of calculated risk rating, while high risk for the tool of standard-based matrix. For the workers who exposed to noise, risk of noise-induced deafness was unacceptable and medium risk using two tools, respectively. Conclusion: Both EPA model and ICMM model can appropriately predict and assessthe occupational health risk in wooden furniture manufactory, ICMM due to the relatively simple operation, easy evaluation parameters, assessment of occupational - disease - inductive factors comprehensively, and more suitable for wooden furniture production enterprise.

  12. Creativity Enhancement in Lithuanian Furniture Manufacturing Business According to International Business Development

    Directory of Open Access Journals (Sweden)

    Rita Zybartaitė

    2014-04-01

    Full Text Available This article analyzes Lithuanian furniture manufacturing business perceptions towards creativity, and creativityenhancement behavior according to its international development. Firstly article focuses on international business development,substantiate need of creativity for international business development, outline creativity influencing factors which operateat individual, team and organizational levels and recommendations how to enhance creativity in methodical way. Secondly,article describes a problem of empirical research, methodology of used methods and instruments, and presents results of surveyresearch.

  13. Prognostic Factors in Patients with Primary Hemangiopericytomas of the Central Nervous System: A Series of 103 Cases at a Single Institution.

    Science.gov (United States)

    Zhu, Hongda; Duran, Daniel; Hua, Lingyang; Tang, Hailiang; Chen, Hong; Zhong, Ping; Zheng, Kang; Wang, Yongfei; Che, Xiaoming; Bao, Weimin; Wang, Yin; Xie, Qing; Gong, Ye

    2016-06-01

    Hemangiopericytoma (HPC) is a rare mesenchymal tumor that tends to affect the central nervous system and is associated with distant metastasis and a high recurrence rate. The purpose of this study was to analyze the prognostic factors in patients with primary HPC who received surgical treatment. This retrospective study reviewed all adult patients with primary HPC of the central nervous system treated from 2001 to 2009 at our institution. Clinical information, adjuvant radiation, and expression levels of Ki-67 and p53 were correlated with patient outcomes. The final analysis included 103 patients. The mean follow-up period was 75.9 months ± 36.5 (range, 1-165 months). There was a significant difference in progression-free survival (PFS) (P < 0.001) and overall survival (P = 0.014) between patients who underwent gross total resection versus subtotal resection. Expression of p53 was found in 48.5% of patients and showed utility as an independent unfavorable prognostic factor for PFS (P = 0.006). Multivariate analysis revealed that only extent of tumor resection (P = 0.004) and p53 expression (P = 0.024) were independent prognostic factors for PFS. Adjuvant radiation was found to extend PFS only in the p53-negative expression group (P = 0.044). Gross total resection significantly improves the outcome of patients with primary HPCs, whereas adjuvant radiation contributes significantly to PFS only in patients with negative p53 expression and in patients with incomplete resections. Extent of resection and p53 expression may serve as prognostic markers for the outcome of patients with primary HPC. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. PERFORMANCE ANALYSIS ON FREIGHT TRANSPORTATION IN FURNITURE INDUSTRY, A CASE STUDY IN BANTUL, YOGYAKARTA, INDONESIA

    Directory of Open Access Journals (Sweden)

    C. H. Soekamto

    2012-06-01

    Full Text Available The Supply Chain Management is a new philosophy encouraging internal and external integration which encompass all the aspects, from the supplier until down to the customers. Transportation plays a major role in achieving efficiency and effectiveness because the role of transportation in the Supply Chain is as the intermediary help to distribute the physical goods from one entity to another entity.  For this reason, the objective of this research is to analyse and measure the effectiveness and efficiency of inbound and outbound logistics in the furniture industry in Bantul, Yogyakarta. Firstly, the author will try to draw the supply chain mapping in order to gain more understanding about the entities in the supply chain.  Secondly, performance of the transportation modes that will be used to move the furniture will be assessed through questionnaire. Thirdly, the author will try to analyse the response if rail transportation is proposed as an alternative transportation mode to move the goods. Lastly, conclusion and recommendation regarding the issue will be derived as implied in the result from data analysis. Keywords: Supply chain management, transportation, performance, furniture industry.

  15. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

    2012-06-01

    between wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

  16. Pleural mesothelioma: Case-report of uncommon occupational asbestos exposure in a small furniture industry.

    Science.gov (United States)

    Oddone, Enrico; Imbriani, Marcello

    2016-01-01

    The relationship between asbestos exposure and malignant mesothelioma is no longer disputed, although it is not always easy to trace past occupational exposure. This report describes a case of uncommon asbestos exposure of a small furniture industry worker, who subsequently died of pleural malignant mesothelioma, to stress the crucial importance of a full reconstruction of the occupational history, both for legal and compensation purposes. Sarcomatoid pleural mesothelioma was diagnosed in a 70-year-old man, who was previously employed as a carpenter in a small furniture industry. He worked for about 6 years in the small factory, was exposed to asbestos during the assembly of the furniture inspired by classical architecture, in which asbestos cement tubes were used to reproduce classical columns. During this production process no specific work safety measures were applied, nor masks or local aspirators. No extra-professional exposure to asbestos was identified. This mesothelioma case was investigated by the Public Prosecutor's assignment that commissioned expert evidence on the legal accountability for the disease. Despite its uncommon expositive circumstance, the length of latency (about 30 years), the duration of exposure, the clinical and histochemical features are all consistent with literature evidence, accounting for the occupational origin of this malignancy. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  17. AN ASSESMENT OF CURRENT EMPLOYMENT NEEDS IN THE ROMANIAN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Cristinel Petrişor CONSTANTIN

    2015-12-01

    Full Text Available The paper presents the results of an exploratory survey among Romanian companies from the furniture industry. The study aimed to identify: (1 respondents’ opinions regarding the main competences that a candidate needs to prove in order to be hired; (2 attitudes regarding the competences of the graduates from the Wood Engineering Faculty, Transilvania University of Brasov; and (3 main current employment needs of Romanian furniture industry. The results indicated that the highest importance in the selection of employees is given to transversal competences such as: orientation to quality; learning capacity; and availability for self-development, team working; and involvement in meeting customers’ requirements. The interviewed representatives of the studied companies mainly need skilled workers in the furniture industry but also engineers able to manage the company’s processes, or to design certain processes and products. The results of the present study may be used by the Wood Engineering Faculty in their attempt to adapt the academic curriculum and course contents; and give their graduates a chance to acquire relevant competences which may enhance their employability.

  18. assessment of environmental impacts in comfortable furniture production process using life cycle assessment (LCA technique

    Directory of Open Access Journals (Sweden)

    hejhar abbasi

    2016-12-01

    Full Text Available Furniture industry releases annually a large amount of volatile organic compound to the environment due to the use of adhesives, textiles, paints and coating materials. There are some different methods to measure the load of pollutions and the environmental impacts. Life cycle assessment (LCA is one of the best techniques. LCA is a technique in which all environmental impacts related to a product assessed all over its life cycle, from cradle to grave, and ultimately can be used to improve the production process and to prevent unsuitable environmental impacts. In summary, it can be concluded that the use of this technique is the basis for sustainable development and improving social, economic, and environmental indices. This study focused on the collecting of a comprehensive life cycle inventory data for comfortable furniture in two different production processes (B1 and B2 located in Tehran province, and analyzed the environmental impacts during the production process as gate to gate investigation. The results revealed that emissions in production process B1 were higher than that of production process B2. The reason for this is that basic operations such as sawing and frame assembling along with final operation have been done in the same unit for case B1. Textile production and usage, and polyurethane foam were identified as the main hotspots, respectively. Moreover, the results showed that comfortable furniture production process has the highest effects on ecosystem quality, human health, and resources (fossil fuels and mines, respectively.

  19. Fourier series

    CERN Document Server

    Tolstov, Georgi P

    1962-01-01

    Richard A. Silverman's series of translations of outstanding Russian textbooks and monographs is well-known to people in the fields of mathematics, physics, and engineering. The present book is another excellent text from this series, a valuable addition to the English-language literature on Fourier series.This edition is organized into nine well-defined chapters: Trigonometric Fourier Series, Orthogonal Systems, Convergence of Trigonometric Fourier Series, Trigonometric Series with Decreasing Coefficients, Operations on Fourier Series, Summation of Trigonometric Fourier Series, Double Fourie

  20. Processo de implementação da certificação florestal nas empresas moveleiras nacionais Process of implementation of florest certification in nacional furniture companies

    Directory of Open Access Journals (Sweden)

    Laércio Antônio Gonçalves Jacovine

    2006-12-01

    Full Text Available O presente estudo foi desenvolvido com o objetivo de avaliar o processo de implementação da certificação florestal nas empresas moveleiras nacionais. Para a realização deste estudo, utilizaram-se dados secundários, obtidos do website do Conselho de Manejo Florestal (FSC do Brasil e dados primários, obtidos de questionários aplicado às empresas moveleiras que possuíam produtos certificados. Verificou-se que o tempo gasto no processo, na maioria dos casos, foi de menos de um ano, e os custos principais estiveram relacionados à preparação da empresa para a auditoria de certificação. Além disso, a maioria das empresas afirmou utilizar a logomarca FSC nos seus produtos certificados e não possuíam experiência com outros tipos de certificação (série ISO, por exemplo. Pelos resultados, pode-se concluir que o período de tempo gasto na implementação da certificação é considerado breve, além de os custos serem acessíveis para as empresas, no geral. Conclui-se, também, que possuir outro tipo de certificação não é fator determinante para que uma empresa da indústria moveleira busque a certificação de cadeia de custódia de seus produtos.The objective of the present study was to evaluate the process of implementation of forest certification in Brazilian furniture companies. Secondary data from the Forest Management Council website (FSC Brazil and primary data from questionnaires applied to furniture companies producing certified products were used. It was verified that the time spent on the process, in most cases, was less than one year, and the main costs were related with preparing the company for the certification audit. In addition, most companies declared that they use the FSC label in their products and have no experience with other types of certification (ISO series, for example. The results led to the conclusiom that the time spent in the implementation of the certification is considered short and the costs

  1. Source emission and model evaluation of formaldehyde from composite and solid wood furniture in a full-scale chamber

    Science.gov (United States)

    Liu, Xiaoyu; Mason, Mark A.; Guo, Zhishi; Krebs, Kenneth A.; Roache, Nancy F.

    2015-12-01

    This paper describes the measurement and model evaluation of formaldehyde source emissions from composite and solid wood furniture in a full-scale chamber at different ventilation rates for up to 4000 h using ASTM D 6670-01 (2007). Tests were performed on four types of furniture constructed of different materials and from different manufacturers. The data were used to evaluate two empirical emission models, i.e., a first-order and power-law decay model. The experimental results showed that some furniture tested in this study, made only of solid wood and with less surface area, had low formaldehyde source emissions. The effect of ventilation rate on formaldehyde emissions was also examined. Model simulation results indicated that the power-law decay model showed better agreement than the first-order decay model for the data collected from the tests, especially for long-term emissions. This research was limited to a laboratory study with only four types of furniture products tested. It was not intended to comprehensively test or compare the large number of furniture products available in the market place. Therefore, care should be taken when applying the test results to real-world scenarios. Also, it was beyond the scope of this study to link the emissions to human exposure and potential health risks.

  2. Effectiveness of low cost adapted school furniture on the functional performance of a child with cerebral palsy

    Directory of Open Access Journals (Sweden)

    Marco Aurélio Teixeira Piovezanni

    2014-06-01

    Full Text Available Individuals with cerebral palsy present an atypical motor function, characteristic altered postures in movement coordination and muscle tone. This causes limitations in their ability to perform functional activities. In this context, the introduction of assistive technology is vital to the objective of augmenting their ability to function productively and be included in society. It is common for individuals with cerebral palsy to have difficulty maintaining body dynamics, especially with seated posture. The objective of this study is to produce an adapted school desk and adapted school chair with low cost materials and to study their efficacy in adjusting the writing motor skills of a child with cerebral palsy. This stydi’s case is a boy who has been diagnosed with diplegic cerebral palsy. The collection and registration of data was done in three stages, with the child positioned in adapted furniture, regular school furniture and again in the furniture adapted to establish a comparison. Data analysis was through nonparametrical statistical tests. There was no statistical significance and was verified inconsistency in the data presented, because cannot be said for sure wich furniture was more effective in carrying while performing a proposed task and even if there was learning motor with its repetition. This fact does not invalidate the adequacy of school furniture to the student with cerebral palsy, because is an important factor facilitate control and postural stability to the individual, which interferes with fine motor skills of these individuals, influencing their performance in school activities.

  3. Potential Co-Generation of Electrical Energy from Mill Waste: A Case Study of the Malaysian Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2016-04-01

    Full Text Available Furniture manufacturing in Malaysia is an established industry driven primarily by the availability of raw materials and labor. However, the industry suffers from the low-recovery rate of its materials, as it produces a substantial amount of waste during the manufacturing process. Although smaller waste fragments, or off-cuts, are recovered for other purposes, the splinters, shavings, and coarse dust have little economic value and are often discarded. Because wood is a well-established source of bioenergy, this study investigated the potential use of mill waste from the furniture-manufacturing industry for electrical energy generation. Waste from the rubberwood, bamboo, and rattan furniture industries was evaluated for its potential electrical energy generation, and the amount was compared with the electrical energy that was consumed by the furniture industry. The study also compared the emission of greenhouse gases from the combustion of these waste materials against fossil fuels used to generate electricity to assess its potential in terms of the environmental benefits. In conclusion, such mill waste could be utilized as substitute for fossil fuel to generate energy in the furniture industry.

  4. Analysis of successful rate factors for small and medium enterprises in furniture manufacturing sector in Klaten Regency - Central Java, Indonesia

    Science.gov (United States)

    Budhi Utomo, R.; Lasminiasih; Prajaka, S.

    2018-03-01

    Small and Medium Enterprises (SMEs) are business activities that can expand the level of employment rate and provide economic services to the wider community and can play a role in the process of equalizing and improving people’s income, stimulating economic growth as well as realizing national stabilities. The aim of this study is to identify the factors of the success rate for Small and Medium Enterprises (SMEs) in furniture manufacturing sector in Klaten regency, Central Java, Indonesia. The method employed in this study was descriptive qualitative by also employing quantitative analysis of which the data were collected through observations, interviews and by administering questionnaires. The results seemed to indicate that the furniture business in Klaten is still experiencing difficulties in managing its various aspects of business, namely in terms of marketing (either directly or indirectly or by making the best use media of technology) and managing capital. All this time, the SMEs in furniture manufacturing sector in Klaten have been utilizing a very simple system in producing tables, chairs, wardrobes and any other furniture products which are then distributed to be sold by larger furniture companies. This condition makes the SMEs unable to be independent in running their business.

  5. The fate of Spanish furniture on the art market as reflection of its social valuation

    Directory of Open Access Journals (Sweden)

    Caruana Moyano, Sonsoles

    2011-06-01

    Full Text Available In Spain furniture did not begin to be dealt with as material for scholarly research —with notable exceptions— until the 1970s. Likewise at that time a new form of art sales appeared on the national scene in addition to antique and art dealers: auctions, invented in England 200 years earlier. Thus the scholarly and the commercial came together: rigorous publications, thorough studies and catalogues of furniture which encouraged the appearance of new pieces, in many instances via the channel of the art market- that in turn nourished serious studies. Consequently furniture began to be valued in the broadest sense of the term, leading to its conservation, its dissemination and fixing its monetary worth.

    El mueble no comenzó a ser tratado en España como objeto de estudio científico —salvo honrosas excepciones— hasta la década de 1970. En ese momento irrumpe además en el panorama nacional una nueva forma de venta de arte, al margen de anticuarios y marchantes: las subastas, nacidas dos siglos atrás en Inglaterra. Así, lo académico y lo comercial se aúnan: publicaciones rigurosas, estudios concienzudos y catálogos de mobiliario, favorecen la aparición de nuevas piezas en muchas ocasiones a través del canal del mercado del arte, que, a su vez, nutren dichos estudios. Se aprende a valorar, en el sentido más amplio del término, el mobiliario. Lo que lleva a su conservación, su divulgación y también, por qué no, a establecer su valor pecuniario.

  6. Waste generation and utilisation in micro-sized furniture-manufacturing enterprises in Turkey.

    Science.gov (United States)

    Top, Y

    2015-01-01

    The number of small-scale businesses within most national economies is generally high, especially in developing countries. Often these businesses have a weak economic status and limited environmental awareness. The type and amount of waste produced, and the recycling methods adopted by these businesses during their operation can have negative effects on the environment. This study investigated the types of waste generated and the recycling methods adopted in micro-sized enterprises engaged in the manufacture of furniture. An assessment was also made of whether the characteristics of the enterprise had any effect on the waste recycling methods that were practised. A survey was conducted of 31 enterprises in the furniture industry in Gumushane province, Turkey, which is considered a developing economy. Surveys were undertaken via face-to-face interviews. It was found that medium-density fibreboard (MDF), and to a lesser extent, chipboard, were used in the manufacture of furniture, and two major types of waste in the form of fine dust and small fragments of board are generated during the cutting of these boards. Of the resulting composite board waste, 96.9% was used for heating homes and workplaces, where it was burnt under conditions of incomplete combustion. Enterprises were found to have adopted other methods to utilise their wastes in addition to using them as fuel. Such enterprises include those operating from a basement or first floor of a building in the cities, those continuing production throughout the year, those in need for capital and those enterprises not operating a dust-collection system. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.

  7. Lack of conformity between Indian classroom furniture and student dimensions: proposed future seat/table dimensions.

    Science.gov (United States)

    Savanur, C S; Altekar, C R; De, A

    2007-10-01

    Children spend one-quarter of a day in school. Of this, 60-80% of time is spent in the classroom. Classroom features, such as workspace and personal space play an important role in children's growth and performance as this age marks the period of anatomical, physiological and psychological developments. Since the classroom is an influential part of a student's life the present study focused on classroom furniture in relation to students' workspace and personal space requirements and standards and was conducted in five schools at Mumbai, India. Dimensions of 104 items of furniture (chairs and desks) were measured as were 42 anthropometric dimensions of 225 students from grade six to grade nine (age: 10-14 years). Questionnaire responses of 292 students regarding the perceived adequacy of their classroom furniture were collected. Results indicated that the seat and desk heights (450 mm, 757 mm respectively) were higher than the comparable students' anthropometric dimensions and that of the recommendations of Bureau of Indian Standards (BIS) (340 + 3 mm, 380 + 3 mm seat-heights, 580 + 3 mm 640 + 3 mm desk-heights) as well as Time-Saver Standards (TSS) (381.0 mm seat-height and 660.4 mm desk-height). The depth of the seats and the desks (299 mm, 319 mm, respectively) were less than comparable students' anthropometric dimensions and the recommendations of BIS (IS 4837: 1990). Students reported discomfort in shoulder, wrist, knee and ankle regions. Based on the students' anthropometric data, proposed future designs with fixed table-heights and adjustable seat-heights along with footrests were identified.

  8. STRATEGI ALIANSI DALAM MENGHADAPI GLOBALISASI (STUDY PADA PERUSAHAAN FURNITURE DI KABUPATEN JEPARA)

    OpenAIRE

    Apriyanti Apriyanti

    2014-01-01

    The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can’t fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a b...

  9. Strategi Aliansi dalam Menghadapi Globalisasi (Study pada Perusahaan Furniture di Kabupaten Jepara)

    OpenAIRE

    Apriyanti, Apriyanti

    2014-01-01

    The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can't fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a b...

  10. DSM energy saving pilot project report. Furniture Plant Teika, Riga, Latvia

    International Nuclear Information System (INIS)

    Ananevski, V.; Kalejs, M.; Hercogs, J.; Blumbergs, U.

    1995-07-01

    The purpose of this pilot project was to carry out energy audit into the furniture plant TEIKA and energy saving measures. Another aim was to transfer the Danish know how and experience obtained through the Danish effort in Latvian industries consumers. Therefore great attention is paid to energy mapping in order to show possibilities of the Danish methodisms. This report is a part of the Joint Latvian - Danish Project Demand Side Management and Energy Saving. It is a results of collaborative efforts between a Latvian team, consisting of the specialists from Latvenergo and on the other hand a Danish team, which was represented by the Danish Power Consult company NESA. (EG)

  11. Technical changes and the rate of profit in the Canadian wood, furniture, and paper industries

    OpenAIRE

    M Webber; S Tonkin

    1988-01-01

    In this paper the rate of profit is examined and the components of changes in the rate of profit are identified in the wood, furniture, and paper industries of Canada for the years 1952 to 1981. The rate of profit in the wood industry generally rose, until a dramatic fall since 1979 onwards; this fall was largely due to a collapse of market prices and to the effects of that collapse on the technical composition of capital (via changes in the rate of capacity utilization). Profit rates in the ...

  12. Associations between flame retardant applications in furniture foam, house dust levels, and residents' serum levels.

    Science.gov (United States)

    Hammel, Stephanie C; Hoffman, Kate; Lorenzo, Amelia M; Chen, Albert; Phillips, Allison L; Butt, Craig M; Sosa, Julie Ann; Webster, Thomas F; Stapleton, Heather M

    2017-10-01

    Polyurethane foam (PUF) in upholstered furniture frequently is treated with flame retardant chemicals (FRs) to reduce its flammability and adhere to rigorous flammability standards. For decades, a commercial mixture of polybrominated diphenyl ethers (PBDEs) called PentaBDE was commonly applied to foam to fulfill these regulations; however, concerns over toxicity, bioaccumulation, and persistence led to a global phase-out in the mid-2000s. Although PentaBDE is still detected in older furniture, other FR compounds such as tris(1,3-dichloroisopropyl) phosphate (TDCIPP) and Firemaster® 550 (FM550) have been increasingly used as replacements. While biomonitoring studies suggest exposure is widespread, the primary sources of exposure are not clearly known. Here, we investigated the relationships between specific FR applications in furniture foam and human exposure. Paired samples of furniture foam, house dust and serum samples were collected from a cohort in North Carolina, USA and analyzed for FRs typically used in PUF. In general, the presence of a specific FR in the sofa of a home was associated with an increase in the concentration of that FR in house dust. For example, the presence of PentaBDE in sofas was associated with significantly higher levels of BDE-47, a major component of PentaBDE, in house dust (10 β =6.4, phouse dust when FM550 was identified in the sofa foam (p<0.01). These relationships were modified by dust loading rates in the living room and the ratio of sofa size to room size. Interestingly, levels of TDCIPP and tris(1-chloro-2-isopropyl) phosphate (TCIPP) were also higher in dust with detections in sofa foam; however, these associations were not statistically significant and may suggest there are other prominent sources of these compounds in the home. In addition, the presence of PentaBDE in sofa foam was associated with significantly higher levels of BDE-47 in serum (p<0.01). These results suggest that FR applications in sofas are likely major

  13. Pengaruh Jumlah Tenaga Kerja, Bahan Baku, dan Teknologi terhadap Produksi Industri Furniture di Kota Denpasar

    OpenAIRE

    Natha, Ketut Suardikha; Prianata, Rahadian

    2014-01-01

    The development of a regional development is a process to raise the level of welfare of society. Another reason why the economic growth and development is undertaken is to be able to stimulate sectors of the economy that is growing, one of which is the industrial sector. The industrial sector is one of the few other sectors are growing rapidly in the area of ??Denpasar. One industry that is growing and is now pretty much in demand is the furniture industry. This research was conducted in the ...

  14. DEVELOPMENT OF ENTERPRISE RESOURCE PLANNING APPLICATIONS TO HELP RESOURCES MANAGEMENT OF FURNITURE COMPANY USING TECHNOLOGY WINDOWS COMMUNICATION FOUNDATION

    Directory of Open Access Journals (Sweden)

    Didiek S Wiyono

    2013-09-01

    Full Text Available Furniture companies need the latest information of its resources to maintain efficiency and productivity. ERP can be used as a tool to manage the existing resources on furniture company and can quickly display the suitable information. The study was conducted to design a simple ERP application that can help resource management on the furniture company. ERP application built with object-oriented methods. The implementation is using web technology as the user interface, Windows Communication Foundation (WCF as the application interface with other systems, and HTTP / HTTPS as the transport protocol to access the application. The results of study is a simple ERP application which consist of order management, production, inventory, purchasing, and reporting. ERP applications can be accessible to users through the web. For the purposes of integration, has built 72 services of WCF that can be accessed by other applications even though using different platforms. Keywords: erp, web, windows communication foundation, integration

  15. THE STRATEGIC RELEVANCE OF TECHNOLOGY-RELATED VARIABLES TO THE COMPETITIVENESS OF SMALL - TO MEDIUM-SIZED FURNITURE MANUFACTURERS

    Directory of Open Access Journals (Sweden)

    Lourens, A. S.

    2012-11-01

    Full Text Available SMMEs can make a critical and positive economic contribution to South Africa, and small- to medium-sized furniture manufacturers (SM/FMs have the potential to contribute to economic growth, job creation, and GDP. However, the furniture industry has not stayed abreast of technological advances. To survive in an environment of increasing competition and imports, competitive strategies must be devised. One such strategy is for technology adoption and implementation that can provide solutions for the furniture industry to improve speed, quality, variety, flexibility, and productivity, resulting in improved competitiveness. However, the adoption of technology means that its acquisition and application must be managed strategically, as the use of technology involves far more than simply taking it into account during the business-plan

  16. IKEA heats and cools with urban wase water. First energy saving furniture centre in Berlin-Lichtenberg; IKEA heizt und kuehlt mit staedtischem Abwasser. Erstes Energiespar-Einrichtungshaus in Berlin-Lichtenberg

    Energy Technology Data Exchange (ETDEWEB)

    Genath, Bernd

    2010-11-15

    In May 2010, the district major of Berlin-Lichtenberg (Federal Republic of Germany), Christina Emmrich, and the future boss of the Swedish furniture furniture IKEA, Jutta Iskalla, symbolically laid the foundation for the meanwhile 46th IKEA furniture store in Germany with a unique building engineering: The urban waste water heats and cools the office rooms and salesrooms via heat pump. The furniture centre is to be opened in December 2010.

  17. Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

    Science.gov (United States)

    Bleda, Andrés L.; Jara, Antonio J.; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F.

    2012-01-01

    The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain. PMID:22778653

  18. Evaluation of the impact of furniture on communications performance for ubiquitous deployment of Wireless Sensor Networks in smart homes.

    Science.gov (United States)

    Bleda, Andrés L; Jara, Antonio J; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F

    2012-01-01

    The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

  19. Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

    Directory of Open Access Journals (Sweden)

    Antonio F. Gómez Skarmeta

    2012-05-01

    Full Text Available The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

  20. Infinite series

    CERN Document Server

    Hirschman, Isidore Isaac

    2014-01-01

    This text for advanced undergraduate and graduate students presents a rigorous approach that also emphasizes applications. Encompassing more than the usual amount of material on the problems of computation with series, the treatment offers many applications, including those related to the theory of special functions. Numerous problems appear throughout the book.The first chapter introduces the elementary theory of infinite series, followed by a relatively complete exposition of the basic properties of Taylor series and Fourier series. Additional subjects include series of functions and the app

  1. An integrated approach for developing a technology strategy framework for small- to medium-sized furniture manufacturers to improve competitiveness

    Directory of Open Access Journals (Sweden)

    Lourens, A.S.

    2013-05-01

    Full Text Available Low-technology firms, such as those found within the furniture manufacturing industry, have no framework or methodology to guide them successfully to acquire and integrate technology that enables them to operate more competitively. The aim of this article is to illustrate the development of a technology strategy framework for small- to medium-sized furniture manufacturers to assist them to improve their competitiveness. More specifically, this article presents an integrated technology strategy framework that enables management to integrate their business strategy with their technology requirements successfully, thus improving competitiveness.

  2. CRITICAL DEVELOPMENT OF COSTING METHODS USED IN THE FURNITURE INDUSTRY, IN THE CONTEXT OF ECONOMIC REALITY SPECIAL XXI CENTURY

    Directory of Open Access Journals (Sweden)

    Ene Dumitru

    2010-12-01

    Full Text Available In the current economic downturn in the furniture industry companies, to face competition, requires new costing methods to succeed, in a flexible manner, fructifying market information, inside to find levers to identify places, resource intensive activities and then cost reduction opportunities. New methods of management cost excess the accounting and economics scope Current economic situation requires this work and converts the cost information into the main tool of insurance competitiveness and profitability of the company. Applying the standard cost in single cost model is a viable business solutions of enterprises in the furniture industry to face strong competition from European Union, specifically in the context of complex economic XXI century.

  3. APPLICATION OF NEAR INFRARED SPECTROSCOPY AND EXPLORATORY DATA ANALYSIS FOR THE IDENTIFICATION OF WOODS IN THE FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Lucas Ferreira Bastos

    2012-07-01

    Full Text Available The paper aimed to investigate the application of infrared spectroscopy and exploratory data analysis to distinguish the different types of natural woods, contributing to the control of the origin of the materials used in the furniture industry. The near infrared spectroscopy (NIR was used for the characterization of 44 samples of 19 different types of wood, and the principal component analysis (PCA to discriminate. The proposed methodology was efficient in the separation of some samples, but further studies should be performed for the diffusion of this methodology in the routine of the furniture industry.

  4. Sustainable Competitive Advantage (SCA Analysis of Furniture Manufacturers in Malaysia: Normalized Scaled Critical Factor Index (NSCFI Approach

    Directory of Open Access Journals (Sweden)

    Tasmin Rosmaini

    2016-06-01

    Full Text Available The purpose of this paper is to investigate Malaysian furniture industry via Sustainable competitive advantages (SCA approach. In this case study, sense and respond method and Normalized Scaled Critical Factor Index (NSCFI are used to specify the distribution of companies’ resources for different criteria and detect the attributes which are critical based on expectation and experience of companies’ employs. Moreover, this study evaluates Malaysian furniture business strategy according to manufacturing strategy in terms of analyzer, prospector and defender. Finally, SCA risk levels are presented to show how much company’s resource allocations support their business strategy.

  5. New productive technologies for wood and furniture industry; Nuevas tecnologias productivas para el sector de la madera y del mueble

    Energy Technology Data Exchange (ETDEWEB)

    Sojo Calvo, F. J.

    2012-07-01

    During recent years, the wood industry and furniture industry have declined sharply, up to 46,5% of the total employment. These companies have always had a familiar character, their cost structure has enabled them to stay afloat during the crisis while larger companies have succumbed. The main problems that threaten their viability are the fall of the construction sector in the case of wood and the increasing imports in the case of furniture. The Industrial Observatory of the Wood Industry has made available two tools to put the latest technology available to the companies. (Author)

  6. Magnitude and Causes of Low Vision Disability (Moderate and Severe Visual Impairment among Students of Al-Noor Institute for the Blind in Al-Hassa, Saudi Arabia; A case series

    Directory of Open Access Journals (Sweden)

    Fahad Al-Wadani

    2012-02-01

    Full Text Available Objectives: This study aimed to estimate the magnitude and causes of low vision disability (severe visual impairment [SVI] and moderate visual impairment [MVI] among students at Al-Noor Institute for the Blind (NIB in Al-Hassa, Saudi Arabia in 2006. Methods: An optometrist conducted refraction of 122 eyes of the 61 students (27 boys and 34 girls with MVI (vision <6/18 to 6/60 and SVI (vision <6/60 to 3/60. Ophthalmologists examined the anterior and posterior segments, and analysed the outcomes of additional investigations to finalise the diagnosis. The results were categorised as ‘preventable’, ‘treatable’ and ‘not amenable to treatment’. The low vision care was also reviewed. Results: In 12 (9.8% eyes, visual acuity was ≥6/18 and in 28 (23% eyes, it was <3/60. MVI and SVI were found in 82 eyes (67.2%. Hereditary retinal disorders were found in 68 (55.7% eyes. Although refractive errors were found in 112 (91.8% eyes, isolated refractive error was found in only 9 students. Congenital glaucoma and cataract were responsible for visual impairment in 16 (13.1% and 9 (7.4% eyes. These students were prescribed optical and non-optical low vision aids. Conclusion: Retinal disease was the main cause of SVI and MVI in our series. Some students at Al-Noor Institute for the Blind have curable low vision conditions. Rehabilitation of low vision disability should be different from that offered to the absolutely blind.

  7. IMPACTS OF DIFFERENT JOINT ANGLES AND ADHESIVES ON DIAGONAL TENSION PERFORMANCES OF BOX-TYPE FURNITURE

    Directory of Open Access Journals (Sweden)

    Musa Atar

    2010-02-01

    Full Text Available The goal of this study was to determine the effects of different joint angles and adhesives on diagonal tension performances of the box-type furniture made from solid wood and medium density fiberboard (MDF. After drilling joints of 75º, 78º, 81º, 84º, and 87º degrees on Oriental beech, European oak, Scotch pine, and MDF samples, a diagonal tensile test was applied on corners glued with polyvinyl acetate (PVAc and polyurethane (D-VTKA = Desmodur-Vinyl Trieketonol Acetate according to ASTM D 1037 standard. With reference to the obtained results, the highest tensile strength was obtained in European oak with PVAc glue and joint angle of 84º, while the lowest value was obtained in MDF with D-VTKA glue and joint angle of 75º. Considering the interaction of wood, adhesive, and joint angle, the highest tensile strength was obtained in European oak with joint angle of 81º and D-VTKA glue (1.089 N.mm-2, whereas the lowest tensile strength was determined in MDF with joint angle of 75º and PVAc glue (0.163 N.mm-2. Therefore, PVAc as glue and 81º as joint angle could be suggested to obtain some advantageous on the dovetail joint process for box-type furniture made from both solid wood and MDF.

  8. User Requirements of Furniture Influenced by a Move to a Senior Housing

    Directory of Open Access Journals (Sweden)

    Oskar Jonsson

    2012-08-01

    Full Text Available User-centred design approaches within the field of furniture design for old people involves an act of embracing and balancing various end-user needs and assessing their relative importance for the product experience. It is often assumed that older people’s physiological needs dominate their other needs. In the present study, three focus group interviews were carried out with the exploratory purpose of gaining an understanding of how people feel and think about changes when moving to and living in an apartment in senior housing, outside the housing market, and what impact this has on their opinions of furniture and other interior products. Twelve people aged 59–93 took part. The outcomes of the focus group interviews point to demands on products that support the physical, psychological and social changes that relocation and aging may bring, and correspond to an independent and self-determinant identity. User requirements related to usability and affective product experience for the design of totally new or improved products are proposed. The paper discusses the complexity in the research assignment to communicate and bring end-user knowledge and experiences to life, and suggests that designers will benefit from carrying out or being involved in user-centred research.

  9. MODELING BILL-OF-MATERIAL WITH TREE DATA STRUCTURE: CASE STUDY IN FURNITURE MANUFACTURER

    Directory of Open Access Journals (Sweden)

    Toni Prahasto

    2012-02-01

    Full Text Available This paper presents a modeling of Bill-of-Material with tree data structure. The BOM represents wooden furniture products. The management of BOM is incorporated into an MRP software which is specially built for a furniture manufacturer. The tree data structure is approached with an object oriented programming to provide the creation and modification of the data. The tree object is designed so that a downstream programmer can create an application with high productivity, using the BOM object of course. Legality of the development is ensured by adapting open source resources, i.e. MySQL database engine, PHP server script, and client-side Javascript. The BOM object is used extensively in the MRP software that is being developed. A couple of screenshots are presented to demonstrate the ease of creation and manipulation of Bill-of-Material. The proper approach of modeling BOM with tree structure allows the programmer to reach high productivity during the development of the aforementioned MRP customized software. Keyword : Modeling, Bill of Material, Tree Data Structure

  10. STRATEGI ALIANSI DALAM MENGHADAPI GLOBALISASI (STUDY PADA PERUSAHAAN FURNITURE DI KABUPATEN JEPARA

    Directory of Open Access Journals (Sweden)

    Apriyanti Apriyanti

    2014-07-01

    Full Text Available The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can’t fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a base form marketing alliance that, enclose: product or sevice alliance, promotional alliance, logistic alliance and pricing collaborations. This examination intend to give alternative of formulation strategi that will be used by company in make alliance strategy.To reach the purpose in order to get exact strategy formulation is used by analisis tool that are SWOT Matric, BCG Matric, and QSP Matric. With first base by identifying external factor and internal factors. The result of alliance strategy analysis formulation at furniture company according analysis result of SWOT Matric, BCG Matric, and QSP Matric are recommended 4 strategy that is done by each company with step priority application as follow: I Strategic service alliance, II Strategic opportunity alliance, III Strategic pricing collaboration and IV Strategic promotional alliance.

  11. Analysis of Usability in Furniture Production of Wood Plastic Laminated Board

    Directory of Open Access Journals (Sweden)

    Abdullah Cemil Ilçe

    2015-05-01

    Full Text Available The objective of this study was to manufacture a lightweight and easily producible wood plastic laminate (WPL board that could be used in the furniture sector. Eastern beech (Fagus orientalis L. veneer papels (A and hollow polycarbonate boards (B, both with a thickness of 4 mm, were laminated in different combinations using polyurethane (PUR and polychloroprene (PCR adhesives. The physical and mechanical properties of the WPL boards obtained were determined according to the principles specified in the EN 326-1, EN 317, EN 310, ASTM D1037, and ASTM D1761 standards. Subsequently, the specimens were compared with particle boards (PB, medium density fiberboards (MDF, and okoume plywoods (PW. According to the results, the AABAA, ABABA, and ABBBA combinations of the WPL materials had better physical properties, such as weight, water absorption, and swelling thickness, compared to the other composites. Furthermore, because the WPL materials had a high bending resistance, modulus of elasticity, and nail and screw withdrawal strength, they could be used instead of PB and MDF. The WPL material obtained within the scope of this study are suitable for furniture making.

  12. Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

    Science.gov (United States)

    Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

    2018-03-22

    Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

  13. DIAGNOSIS OF BANKRUPTCY RISK IN THE FURNITURE INDUSTRY USING THE CANON-HOLDER AND ALTMAN MODELS

    Directory of Open Access Journals (Sweden)

    Radu MĂRGINEAN

    2015-06-01

    Full Text Available The financial and economic crisis that started in 2008 caused negative effects felt by the entire European economy, affecting more or less all of the world's economies. This paper aims to study the diagnosis of bankruptcy risk using the Canon-Holder and Altman methods, from a theoretical point of view and with practical examples on a company in the furniture industry in Romania. In a context of economic uncertainty, the relevance of such an analysis designed to quantify the risk of bankruptcy for companies is the default. The financial data used is real and descriptively analyzed, we analyzed a period of eight years, between 2006-2013. As a method of analysis complementary to the financial analysis of the background of companies, the diagnosis of bankruptcy risk using the score method, using the specific models known in the specialty literature, brings relevant information concerning the problem of risk assessment. We concluded in the case study the opportunity of such an analysis for the furniture industry through the results obtained in the case studies, the method is a useful tool, especially for the practitioners in the sector.

  14. Do animals and furniture items elicit different brain responses in human infants?

    Science.gov (United States)

    Jeschonek, Susanna; Marinovic, Vesna; Hoehl, Stefanie; Elsner, Birgit; Pauen, Sabina

    2010-11-01

    One of the earliest categorical distinctions to be made by preverbal infants is the animate-inanimate distinction. To explore the neural basis for this distinction in 7-8-month-olds, an equal number of animal and furniture pictures was presented in an ERP-paradigm. The total of 118 pictures, all looking different from each other, were presented in a semi-randomized order for 1000ms each. Infants' brain responses to exemplars from both categories differed systematically regarding the negative central component (Nc: 400-600ms) at anterior channels. More specifically, the Nc was enhanced for animals in one subgroup of infants, and for furniture items in another subgroup of infants. Explorative analyses related to categorical priming further revealed category-specific differences in brain responses in the late time window (650-1550ms) at right frontal channels: Unprimed stimuli (preceded by a different-category item) elicited a more positive response as compared to primed stimuli (preceded by a same-category item). In sum, these findings suggest that the infant's brain discriminates exemplars from both global domains. Given the design of our task, we conclude that processes of category identification are more likely to account for our findings than processes of on-line category formation during the experimental session. Copyright © 2009 Elsevier B.V. All rights reserved.

  15. GIS DATA COLLECTION FOR PEDESTRIAN FACILITIES AND FURNITURE USING MAPINR FOR ANDROID

    Directory of Open Access Journals (Sweden)

    N. Naharudin

    2016-09-01

    Full Text Available Mobile GIS is introduced to reduce the time taken in completing the field data collection procedure. With the expansion of technology today, mobile GIS is not far behind. It can be integrated with the high-end innovation tools like smartphones. Spatial data capture which deemed to be the toughest stage of a GIS project is made simple with this method. Many studies had demonstrated the usage of mobile GIS in collecting spatial data and this paper discusses how it can be applied in capturing the GPS location of pedestrian furniture and facilities. Although some of the spatial data are available from local agencies, still a more detailed data is needed to create a better data model for this study. This study uses a free android application, MAPinr, which is available on the Google PlayStore to collect spatial data on site. It adopted the GNSS and cellular network positioning to locate the position of the required data. As the application allows the captured data to be exported to a GIS platform, the geometric error of the data was improved. In the end, an authenticated spatial dataset comprising pedestrian facilities and furniture in point and line form will be produced and later be used in a pedestrian network analysis study.

  16. GIS Data Collection for Pedestrian Facilities and Furniture Using Mapinr for Android

    Science.gov (United States)

    Naharudin, N.; Ahamad, M. S. S.; Sadullah, A. F. M.

    2016-09-01

    Mobile GIS is introduced to reduce the time taken in completing the field data collection procedure. With the expansion of technology today, mobile GIS is not far behind. It can be integrated with the high-end innovation tools like smartphones. Spatial data capture which deemed to be the toughest stage of a GIS project is made simple with this method. Many studies had demonstrated the usage of mobile GIS in collecting spatial data and this paper discusses how it can be applied in capturing the GPS location of pedestrian furniture and facilities. Although some of the spatial data are available from local agencies, still a more detailed data is needed to create a better data model for this study. This study uses a free android application, MAPinr, which is available on the Google PlayStore to collect spatial data on site. It adopted the GNSS and cellular network positioning to locate the position of the required data. As the application allows the captured data to be exported to a GIS platform, the geometric error of the data was improved. In the end, an authenticated spatial dataset comprising pedestrian facilities and furniture in point and line form will be produced and later be used in a pedestrian network analysis study.

  17. On the necessity of improving the environmental impacts of furniture and appliances in net-zero energy buildings.

    Science.gov (United States)

    Hoxha, Endrit; Jusselme, Thomas

    2017-10-15

    There is now clear evidence regarding the extensive use of furniture and appliances in daily human life, but there is less evidence of their impact on the environment. Responding to this gap in knowledge, this study focuses on an assessment of the environmental impacts of furniture and appliances as used in highly energy efficient buildings. Their primary energy, non-renewable energy and global warming potential indicators have been assessed by extending the boundaries of the Life Cycle Assessment (LCA) study beyond the building itself. In conclusion, we found that furniture and appliances were responsible for around 30% of greenhouse gas emissions and non-renewable energy consumption and 15% of primary energy consumption comparing to the overall impacts of the building. Since embodied impacts represent the largest values, the process for labelling the appliances' energy efficiency should encompass a life-cycle point of view, not just a usage point of view as the case currently. Among office appliances, computer equipment was ranked as the highest impacting element, especially laptops and monitors. As for domestic appliances, refrigerators and electric ovens had the biggest impacts. Concerning furniture, the greatest impacts were from office and kitchen cabinets. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Character-marked furniture made from red alder harvested in southeast Alaska: product perspectives from consumers and retailers

    Science.gov (United States)

    Matthew Bumgardner; David Nicholls; Valerie Barber

    2009-01-01

    In recent decades. red alder (Alnus rubra Bong.) has become an important Pacific Northwest hardwood in appearance-grade lumber markets, such as exports, furniture, and cabinets. However, red alder generally is a short-lived pioneer species, and small logs can result in proportionally large volumes of lower grade lumber containing numerous visual...

  19. 76 FR 53409 - Wooden Bedroom Furniture From the People's Republic of China: Corrected Notice of Court Decision...

    Science.gov (United States)

    2011-08-26

    ... International Ltd. (``Evergreen'') and Jayaraja Furniture (``Jayayraja'') from the surrogate financial ratio..., Nizamuddin and Swaran) to derive the financial ratios pursuant to the lower Court's order in Dorbest II.\\14... Department also recalculated the surrogate financial ratios applied to Dorbest, and re-included the financial...

  20. Cleaner Production Applied in a Small Furniture Industry in Brazil: Addressing Focused Changes in Design to Reduce Waste

    Directory of Open Access Journals (Sweden)

    Carlos Mario Gutiérrez Aguilar

    2017-10-01

    Full Text Available The wood industry is known for being among the biggest resource consumers, having a relatively low yield. The wood furniture industry as part of the wood industry also remains a big generator of residues and a big consumer of resources. Diverse solutions and technologies have been developed to deal with the residues generated, but those technologies are mostly applied at the end of the production chain with limited results. Cleaner production represents a program based on continuous strategies applied to a more sustainable use of materials and energy, minimizing waste and pollution. This paper presents a case study of a cleaner production program developed in a small furniture industry in Salvador de Bahia, Brazil, applying the concepts of cleaner production with parameters of ecodesign developed for the furniture industry. The object of study was the production of a wooden chair made from eucalyptus wood. The application of the cleaner production program and ecodesign parameters allowed a detailed characterization of the waste, resulting in opportunities for a reduction of the use of raw material by 30%, a reduction in waste by 49% and allowing a reduction in energy by 36% due to simplification of the productive process. Among the strategies applied were reshaping pieces, redesigning, and the substitution of materials. The results suggest that despite the existence of more complex environmental methods and approaches, the application of cleaner production plus ecodesign parameters could be more achievable for micro and small furniture industries.

  1. Hardwood lumber widths and grades used by the furniture and cabinet industries: Results of a 14-mill survey

    Science.gov (United States)

    Jan Wiedenbeck; John Brown; Neal Bennett; Everette Rast

    2003-01-01

    Data on red oak lumber width, length, and grade were collected at 14 furniture and cabinet industry rough mills to identify relationships among these lumber attributes and the degree to which they differ from mill to mill. Also, this information is needed to formulate valid lumber size distributions that will improve the quality of theresults obtained in mill and...

  2. Dating furniture and coopered vessels without waney edge - Reconstructing historical wood-working in Austria with the help of dendrochronology.

    Science.gov (United States)

    Klein, Andrea; Nemestothy, Sebastian; Kadnar, Julia; Grabner, Michael

    In the present study, 208 furniture and 168 coopered vessels from three Austrian museums were examined. Dendrochronology was used to date objects and to extract further information such as the necessary time for seasoning, wood loss through wood-working and methods of construction. In most cases sampling was done by sanding the cross section and making digital photographs using a picture frame and measuring digitally. The dendrochronological dates of the sampled furniture range between 1524 and 1937. The group of furniture includes cupboards, chests, tables, benches, commodes and beds. In many cases furniture was artfully painted and sometimes even shows a painted year. With the help of dendrochronology it was proved that some objects had been painted for some time after construction, or had been over-painted. Most furniture, however, was painted immediately after completion. In this case, the seasoning and storage time of the boards and the wood loss due to shaping can be verified. As an average value, 14 years have passed between the dendrochronological date of the outermost ring and the painting. The time span includes time of seasoning and storage and the rings lost by wood-working. This leads, on the one hand to a short storage time of less than 10 years and on the other hand to very little wood loss due to manufacturing. Those boards being less shaped turned out to be back panels of cupboards, therefore they are recommended to be sampled for dating. Coopered vessels were dated between 1612 and 1940. There was evidence that staves were split and not sawn in many cases. The staves were often split out of the outermost part of the tree and hardly any wood was worked away which was proved by the close dendrochronological dates of the single staves of a vessel. Since there is a short time of storage and only little wood loss through wood-working, dating of objects without a waney edge becomes reasonable.

  3. Pemanfaatan Limbah Sabut Kelapa pada Perencanaan Interior dan Furniture yang Berdampak pada Pemberdayaan Masyarakat Miskin

    Directory of Open Access Journals (Sweden)

    Titi Indahyani

    2011-04-01

    Full Text Available Coconut coir is one component of coconut that could be produced and decomposed into products needed by domestic or international market. Cocofiber and cocopeat are two derived products from coconut coir which through several researches could be produced into supporting material of interior and furniture, including matrass, bed sofa, and particle board like MDF, Coconut Fiber Board (CFB. Within this research, it is hoped to distribute the information about the functions and producing materials from coconut coir waste. This is supposed to be used by the government, minor industry, designer, and public to also apply and choose environment-friendly coconus coir material and sustain as a part of sustainable design, green design, social entrepreneurship and related programs. Therefore, coconut coir waste could be valued economically and has its positive effects to society who live around the coconut tree plantation area.  

  4. PRODUCT ADAPTATIONS IN THE INTERNATIONALIZATION PROCESS OF THE FURNITURE SECTOR COMPANIES IN THE SOUTH OF BRAZIL

    Directory of Open Access Journals (Sweden)

    Marise Mainieri de Ugalde

    2011-06-01

    Full Text Available Sustaintability is deserving more attention from companies, not only in their market relations but also in their product development strategies, specially those related with brands and packaging. This study analyzed the product adaptations demanded on the exporting efforts of seven furniture companies of the state of Rio Grande do Sul in the South of Brazil. To do this a multiple case study was carried out involving in depth interviews, observation techniques and analysis of documents. The data collected were analyzed for content and categories were defined considering the literature on the subject and opinions of specialists. Main results showed that most companies do not have a defined and deliberated strategy to act in the international scenario and most adaptations were related to product, brands and packaging were made according to requests from importers and aimed, basically.

  5. Memoirs of a classroom in the city of Mexico: furniture and school material (1879-1911

    Directory of Open Access Journals (Sweden)

    Rosalía Meníndez Martínez

    2008-12-01

    Full Text Available At the end of the XIXth century, it experienced important changes in the public primary education in Mexico, as result of the project of modernization that porfirista impel the government between the year 1882 and 1911. Under this ambien- ce of changes, the classroom were for first attended in his demands of furniture, scho- ol material and spaces; therefore the environment and the dynamics to the interior of these school spaces, it was transformed, and with it there was marked the beginning of a new period in the public school especially the urban one. The intention of this one article it centres on studying the memory of these loun- ges of class, in which deep changes were experienced in the period of between centu- ries and which marked the school culture of the XXth century. Key words: Modernization, School culture, School inventory.

  6. Determinants of Corporate Performance: A Study on Furniture Companies in Jepara Indonesia

    Directory of Open Access Journals (Sweden)

    Amron A.

    2015-03-01

    Full Text Available The aims of this research were to analyze corporate performance through learning orientation, leader’s characteristics, market orientation, and innovation in furniture industries in Jepara, Indonesia. The samples in this research were 110 small and medium enterprises. Based on SEM analysis results, the seven research hypothesis used were; (1 learning orientation has significant effect on corporate performance; (2 learning orientation has significant effect on innovation; (3 leader’s characteristics do not have significant effect on corporate performance; (4 leader’s characteristics have significant effect on innovation; (5 market orientation has significant effect on innovation; (6 market orientation has significant effect on corporate performance; (7 Innovation does not have significant effect on corporate performance. After the test and analysis, it was found that five out of the seven hypotheses were accepted and two out of them were rejected.

  7. Environmental Management as a Strategic Capability: a Study on the Furniture Manufacturing Cluster of Southern Brazil

    Directory of Open Access Journals (Sweden)

    Janielen Pissolatto Deliberal

    2016-01-01

    Full Text Available The incorporation of company programs aimed at sustainability strategies contributes to a balance between economic growth and the use of natural resources. This issue is not exclusive for companies from developed markets. Companies from emerging markets also need to find a way to achieve sustainable practices and organizational performance at the same time. In this context, the aim of this study was to analyze whether environmental management can be considered as a strategic capability, contributing positively to the performance of the manufacturing companies belonging to the Furniture Manufacturing Cluster of Southern Brazil (FMCSB. In order to achieve our objective, we performed a quantitative study through a survey. The sample collected data from 162 companies. Based on univariate and multivariate analysis the results suggest that environmental management can be considered as a strategic capability for the FMCSB since environmental practices are significantly related to organizational performance.

  8. Management Activity Linkages to Innovation Deconstruction: An Exploratory Study of the Furniture Industry in Croatia

    Directory of Open Access Journals (Sweden)

    Andreja Pirc Barčić

    2016-03-01

    Full Text Available Corporate leaders often view innovation as a key contributor to superior profits, market sharing, and competitive positioning. However, confusion regarding the definition of innovation, how to create it, and how to implement it remains. In countries that are recent European Union members, little research has been done on innovation and how innovation is related to corporate management activities. In this study, the linkages were examined in the Croatian furniture industry. The first part of the study was to deconstruct innovation into three components: product innovation, production process innovation, and human resource innovation. The second part of the study evaluates the relationships between these innovation components and four company management activities/factors (research and development investments, company flexibility, export activity, and the Internet usage were examined. Scale testing resulted in valid deconstruction measures of innovation. Hypothesized correlations between innovation components and company management factors were supported, although the results were not fully consistent with those of previous studies.

  9. Chart Series

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) offers several different Chart Series with data on beneficiary health status, spending, operations, and quality...

  10. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    International Nuclear Information System (INIS)

    González-García, Sara; Gasol, Carles M.; Lozano, Raúl García; Moreira, Ma Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-01-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO 2 ) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. “Indoor products” included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the “Outdoor products” analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO 2 emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  11. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Garcia, Sara, E-mail: sara.gonzalez@usc.es [Division of Biology, Department of Life Sciences, Sir Alexander Fleming Building, Imperial College of London, South Kensington Campus, London SW7 2AZ (United Kingdom); Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gasol, Carles M.; Lozano, Raul Garcia [Inedit Innovacio, Carretera de Cabrils, km 2 -IRTA-, 08348 Cabrils, Barcelona (Spain); SosteniPrA - UAB-IRTA, Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Moreira, Ma Teresa [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gabarrell, Xavier; Rieradevall i Pons, Joan [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona UAB, 08193 Bellaterra, Barcelona (Spain); Department of Chemical Engineering, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain)

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO{sub 2}) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. 'Indoor products' included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the 'Outdoor products' analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO{sub 2} emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  12. Flame retardants in UK furniture increase smoke toxicity more than they reduce fire growth rate.

    Science.gov (United States)

    McKenna, Sean T; Birtles, Robert; Dickens, Kathryn; Walker, Richard G; Spearpoint, Michael J; Stec, Anna A; Hull, T Richard

    2018-04-01

    This paper uses fire statistics to show the importance of fire toxicity on fire deaths and injuries, and the importance of upholstered furniture and bedding on fatalities from unwanted fires. The aim was to compare the fire hazards (fire growth and smoke toxicity) using different upholstery materials. Four compositions of sofa-bed were compared: three meeting UK Furniture Flammability Regulations (FFR), and one using materials without flame retardants intended for the mainland European market. Two of the UK sofa-beds relied on chemical flame retardants to meet the FFR, the third used natural materials and a technical weave in order to pass the test. Each composition was tested in the bench-scale cone calorimeter (ISO 5660) and burnt as a whole sofa-bed in a sofa configuration in a 3.4 × 2.25 × 2.4 m 3 test room. All of the sofas were ignited with a No. 7 wood crib; the temperatures and yields of toxic products are reported. The sofa-beds containing flame retardants burnt somewhat more slowly than the non-flame retarded EU sofa-bed, but in doing so produced significantly greater quantities of the main fire toxicants, carbon monoxide and hydrogen cyanide. Assessment of the effluents' potential to incapacitate and kill is provided showing the two UK flame retardant sofa-beds to be the most dangerous, followed by the sofa-bed made with European materials. The UK sofa-bed made only from natural materials (Cottonsafe ® ) burnt very slowly and produced very low concentrations of toxic gases. Including fire toxicity in the FFR would reduce the chemical flame retardants and improve fire safety. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  13. Do hearing threshold levels in workers of the furniture industry reflect their exposure to noise?

    Directory of Open Access Journals (Sweden)

    Małgorzata Pawlaczyk-Łuszczyńska

    2016-06-01

    Full Text Available Background: The aim of the study was to analyze the hearing status of employees of a furniture factory with respect to their exposure to noise and the presence of additional risk factors of noise-induced hearing loss (NIHL. Material and Methods: Noise measurements, questionnaire survey and assessment of hearing, using pure tone audiometry, were carried out in 50 male workers, aged 20–57 years, directly employed in the manufacture of furniture. The actual workers’ hearing threshold levels (HTLs were compared with the predictions calculated according to PN-ISO 1999:2000 based on age, gender and noise exposure. Results: Workers under study were exposed to noise at daily noise exposure levels of 82.7–94.8 dB (mean: 90.9 dB for a period of 3–14 years. In all subjects, mean HTL at 500 Hz, 1000 Hz, 2000 Hz and 4000 Hz did not exceed 25 dB. Nevertheless, high frequency notches were found in 11% of audiograms. The actual workers’ HTLs at 3000–6000 Hz were similar to those predicted using PN-ISO 1999:2000. There were statistical significant differences between HTLs in subgroups of people with higher (> 78 mm Hg and lower (≤ 78 mm Hg diastolic blood pressure, smokers and non-smokers, and those working with organic solvents. Hearing loss was more evident in subjects affected by the additional risk factors specified above. Conclusions: The results confirm the need to consider, in addition to noise, also some other NIHL risk factors, such as tobacco smoking, elevated blood pressure, and co-exposure to organic solvents when estimating the risk of NIHL and developing the hearing conservation programs for workers. Med Pr 2016;67(3:337–351

  14. [Do hearing threshold levels in workers of the furniture industry reflect their exposure to noise?].

    Science.gov (United States)

    Pawlaczyk-Łuszczyńska, Małgorzata; Dudarewicz, Adam; Czaja, Norman; Bortkiewicz, Alicja

    The aim of the study was to analyze the hearing status of employees of a furniture factory with respect to their exposure to noise and the presence of additional risk factors of noise-induced hearing loss (NIHL). Noise measurements, questionnaire survey and assessment of hearing, using pure tone audiometry, were carried out in 50 male workers, aged 20-57 years, directly employed in the manufacture of furniture. The actual workers' hearing threshold levels (HTLs) were compared with the predictions calculated according to PN-ISO 1999:2000 based on age, gender and noise exposure. Workers under study were exposed to noise at daily noise exposure levels of 82.7-94.8 dB (mean: 90.9 dB) for a period of 3-14 years. In all subjects, mean HTL at 500 Hz, 1000 Hz, 2000 Hz and 4000 Hz did not exceed 25 dB. Nevertheless, high frequency notches were found in 11% of audiograms. The actual workers' HTLs at 3000-6000 Hz were similar to those predicted using PN-ISO 1999:2000. There were statistical significant differences between HTLs in subgroups of people with higher (> 78 mm Hg) and lower (≤ 78 mm Hg) diastolic blood pressure, smokers and non-smokers, and those working with organic solvents. Hearing loss was more evident in subjects affected by the additional risk factors specified above. The results confirm the need to consider, in addition to noise, also some other NIHL risk factors, such as tobacco smoking, elevated blood pressure, and co-exposure to organic solvents when estimating the risk of NIHL and developing the hearing conservation programs for workers. Med Pr 2016;67(3):337-351. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  15. Concerning the deterioration of furniture: factors in decay and preventive conservation

    Directory of Open Access Journals (Sweden)

    Ordóñez Goded, Cristina

    2011-06-01

    Full Text Available This article outlines some of the principle factors in the deterioration of furniture (lighting, relative humidity, temperature, biodegradation and the human element and presents the type of maintenance work that can be carried out for their preservation denominated “preventive conservation.” These methods, while not eliminating the natural ageing of furniture, at least manage to slow down the decay of their constituent materials. Among the most important are the maintenance of optimal environmental conditions in the place where the works are located, their periodical inspection to check for possible biological infestation and their cleaning at regular intervals.

    Tras una exposición sobre algunos de los principales factores de deterioro del mobiliario (iluminación, humedad relativa, temperatura, biodegradación y elemento humano, este artículo refiere brevemente al conjunto de intervenciones de mantenimiento que pueden llevarse a cabo de cara a su preservación, denominadas “de conservación preventiva”. Se habla de labores que, si bien no evitan el natural envejecimiento de los muebles, sí pueden retardar la degradación de sus materiales constitutivos. Entre ellas podríamos destacar el mantenimiento de unas condiciones ambientales óptimas del lugar en el que se encuentran ubicadas las obras, la revisión periódica de éstas con el fin de comprobar si existe o no infestación biológica, la limpieza regular de las mismas, etc.

  16. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign.

    Science.gov (United States)

    González-García, Sara; Gasol, Carles M; Lozano, Raúl García; Moreira, María Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO(2)) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. "Indoor products" included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the "Outdoor products" analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO(2) emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments. Copyright © 2011 Elsevier B.V. All rights reserved.

  17. Assessment of occupational exposure to wood dust in the Polish furniture industry

    Directory of Open Access Journals (Sweden)

    Małgorzata Szewczyńska

    2017-02-01

    Full Text Available Background: Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Material and Methods: Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Results: Total dust concentrations were 0.84–13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34–22.13 mg/m3. Respirable fraction concentrations were 0.38–4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. Conclusions: The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1:45–60

  18. Engineering Institute

    Science.gov (United States)

    Projects Past Projects Publications NSEC » Engineering Institute Engineering Institute Multidisciplinary engineering research that integrates advanced modeling and simulations, novel sensing systems and new home of Engineering Institute Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI

  19. Strategi Pemasaran Mebel Kayu Sentra Industri Kecil Pondok Bambu, Jakarta Timur (Wood Furniture Marketing Strategy on Pondok Bambu Small Industry Centre, East Jakarta

    Directory of Open Access Journals (Sweden)

    Yulius Hero

    2011-01-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Furniture is one of wood products to fulfill the household needs, especially for household furnishing. Wood product which is used for furniture tends to decrease because of the substitution products, i.e.: plastic, rattan, bamboo, glass, and metal. To continue their effort, small industries in Indonesia face hard problems and challanges. To solve the hard problems and challenges, then a new marketing strategy through the study on marketing strategy of small wood-furniture industry is needed. This research objectives are to know several factors which have relation toward marketing of woodfurniture and compile alternative small industrial marketing strategy of wood-furniture. Research conducts in Small Industry Centre, Pondok Bambu, East Jakarta from June to July 2008. Some tools are used in this research, such as: questionaire, calculator, camera, and stationery. The method of data collection is purposive sampling with total amount of responden is 30 people-small industry owners. Data analysis uses regression and SWOT method (Strength, Weaknesses. Opportunities, Threath. Result of the research for the regression equation of wood-furniture marketing Y= 9,001 - 0,6798 X1 - 1,4834 X2 - 1,4834 X3 + 0,4818 X4 with value R2 is equal to 51.3%. Linearity test model indicates that F Calculated is 6.57 in significat level α = 1%. Factors that influence wood-furniture marketing of sale volume are variation of product, wood-furniture price, distribution system and promotion. The relation between sale volume with variable of product variation, wood-furniture price, and distribution system is significant with negative direction. It means that smaller product variation, lower wood-furniture price, and more efficient distribution system; will effect to higher sale volume. Whereas the relation between sale volume with variable of promotion is not significant with positive direction. It

  20. Marketing Strategy Analysis for Small and Medium Scale Business Enterprise (SMEs) for Home Industry Furniture in Leilem, the Regency of Minahasa

    Science.gov (United States)

    Pangemanan, S. A.; Walukow, I. M.

    2018-01-01

    Leilem is a small village located in Minahasa Regency. This village is well known for furniture products made of Timber. Eventhough the village has been producing various furniture products with high quality since many decades ago, it has not been able to compete with other new entries such furniture from Java, Synthetic Ratan, Plywood and plastic based furniture. The monotonous design and the finishing works done on the furniture have been some of the major issues in the decline of home furniture. The research explores problems and challenges faced by the furniture home Industry. It will also aim at identifying the internal and external factors that prevent the home industry to compete and survive. In the end the research will develop the strategic positioning of the home industry in the midst of competition. The research methodology employs descriptive analysis in which data are collected through observation, interview, and questionnaire. This methodology is combined with IFE (Internal Factor Evaluation) and EFE (External Factor Evaluation) Matrix, SPACE Matrix and SWOT Analysis and QSPM (Quantitative Strategic Planning Matrix). The sample is 66 business people, of 823 craftsmen who are working in this business. The result shows this home industry is very competitive in terms of consistency, but in terms of promotion, product quality, price, product diversification, design training of furniture, management and economic scale, it is lagging behind. The home industry should be able to develop marketing networking, improve design and product quality, promotion and cost control, product diversification and these can only be done by intensive training in managing business and investment.

  1. Institute news

    Science.gov (United States)

    1999-11-01

    celebrate the Group's 50th anniversary by examining what has been done, focusing on why and how it was done, with lessons and ambitions for the future. The meeting will be held at Institute Headquarters and the programme is as follows: 10.45 - 11.00 Welcome and introduction (Philip Britton: Chair of the Education Group) 11.00 - 11.45 Examinations and assessment through the ages (Tim Akrill, Chief Examiner for A-level Physics with Edexcel) 11.45 - 12.30 Curriculum reform in physics, past, present and future (Professor Jon Ogborn, Director of the Post-16 Physics Initiative) 14.00 - 14.15 Physics education and the Institute of Physics, some personal reflections (speaker to be announced) 14.15 - 15.00 Connecting with Advancing Physics: the first year in HE physics (Professor Mick Brown, University of Cambridge) 15.15 - 15.35 Physics education, the next 50 years! (Ken Dobson, Honorary Editor of Physics Education) The day should hold something for everyone, so reserve your place if you can. Schools and Colleges lecture Dr Zbig Sobiesierski of the University of the West of England is the 1999 - 2000 Institute of Physics Schools and Colleges lecturer, touring the country with his talk `Seeing is believing?'. He will demonstrate the different physical ways in which we can both make and mix colour and will then proceed to discuss why our eyes respond to light in the way they do. The lecture will be aimed primarily at students aged 14 and above, but it will also be suitable for older audiences. The intention, as with previous series, will be to show the relevance of the physics concepts to the members of the audience and the world in which they live. To find out more about the lecture in your area and to make a booking, contact should be made with the local organizer (full details of the list can be obtained from Catherine Wilson at Institute Headquarters). The dates and venues planned so far are as follows: 1 Nov: Northern College, Aberdeen 2 Nov: University of St Andrews 3 Nov

  2. Analysis of the most relevant anthropometric dimensions for school furniture selection based on a study with students from one Chilean region.

    Science.gov (United States)

    Castellucci, H I; Arezes, P M; Molenbroek, J F M

    2015-01-01

    Most of the worldwide standards used for furniture selection suggest the use of the Stature of the school children, assuming that all the other anthropometric characteristics will also be appropriate. However, it is important to consider that students' growth differ with age. The aim of this study is to determine if Popliteal Height can be used as a better, or more adequate, measure for classroom furniture selection when comparing with Stature. This study involved a representative group of 3046 students from the Valparaíso Region, in Chile. Regarding the methodology, eight anthropometric measures were gathered, as well as six furniture dimensions from the Chilean standard. After assigning the level of school furniture using Stature and Popliteal Height to each of the students, six mismatch equations were applied. The results show that when using Popliteal Height, higher levels of match were obtained for the two more important furniture dimensions. Additionally, it also presents a better cumulative fit than Stature. In conclusion, it seems that Popliteal Height can be the most accurate anthropometric measure for classroom furniture selection purposes. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  3. Case Series

    African Journals Online (AJOL)

    calciphylaxis is prevention through rigorous control of phosphate and calcium balance. We here present two ... The authors declared no conflict of interest. Introduction. Calciphylaxis is a rare but serious disorder .... were reported to resolve the calciphylaxis lesions in a chronic renal failure patient [20]. In a series of five.

  4. Fourier Series

    Indian Academy of Sciences (India)

    polynomials are dense in the class of continuous functions! The body of literature dealing with Fourier series has reached epic proportions over the last two centuries. We have only given the readers an outline of the topic in this article. For the full length episode we refer the reader to the monumental treatise of. A Zygmund.

  5. Case series

    African Journals Online (AJOL)

    abp

    13 oct. 2017 ... This is an Open Access article distributed under the terms of the Creative Commons Attribution ... Bifocal leg fractures pose many challenges for the surgeon due to .... Dans notre serie, le taux d'infection est reste dans un.

  6. Fourier Series

    Indian Academy of Sciences (India)

    The theory of Fourier series deals with periodic functions. By a periodic ..... including Dirichlet, Riemann and Cantor occupied themselves with the problem of ... to converge only on a set which is negligible in a certain sense (Le. of measure ...

  7. case series

    African Journals Online (AJOL)

    Administrator

    Key words: Case report, case series, concept analysis, research design. African Health Sciences 2012; (4): 557 - 562 http://dx.doi.org/10.4314/ahs.v12i4.25. PO Box 17666 .... According to the latest version of the Dictionary of. Epidemiology ...

  8. The investigation of the relationship between the job satisfaction and job performance of employees in furniture sector

    Directory of Open Access Journals (Sweden)

    Türkay Türkoğlu

    2017-04-01

    Full Text Available Manpower and performance of employees in furniture industry plays an important role in the quality of the products. It is necessary to ensure the job satisfaction of employees to achieve their high performance. “The Minnesota Job Satisfaction Scale” and “the Job Performance Scale” were used as data collection tools in the study. Therefore, questionnaire form was conducted on 362 employees of furniture sector. Obtained data was analyzed in SPSS program by means of Correlation and Regression Analyses, t-test and ANOVA. The result of the study shows that there is a strong relationship between job satisfaction and employees performance. While there were significant differences in job satisfaction and job performance in term of some employees’ demographic characteristics such as gender, age, educational status and seniority, it wasn’t found significant difference in marital status.

  9. Competition for the Elements of the City Environment for Irkutsk’s Public Spaces: Street Furniture, Street Design

    Directory of Open Access Journals (Sweden)

    Tatyana Danilova

    2016-10-01

    Full Text Available The article reviews the contest «Street furniture. Street design», which was held this summer by manufacturing company «PalpNord», International research laboratory of study and design of the urban environment «Urban Planning School» and the Union of Architects of Russia. The winners and their projects are also listed in the article.

  10. The Effect of Differences Between User’ Characteristics and Socio-Economic Status on the Brand Furniture Preference

    OpenAIRE

    Arslan, Ali Rıza; DORUK, Şemsettin; BURDURLU, Erol

    2009-01-01

    The effect of product properties produced by physical production process and the brand created over communication and the brand perception on user (customer) demand is known reality. The brand behavior according as the brand perception changing owing to the customer properties. In this study, the effect of some user characteristics like age, sex, marital status, occupation, income state, residence, property state of their house on brand furniture preference was examined. A relevant questionna...

  11. Numerical Analysis of the Influence of Thermal Mass, Phase Change Materials and Furniture / Indoor Content on Building Energy Flexibility

    DEFF Research Database (Denmark)

    Johra, Hicham; Heiselberg, Per Kvols; Dreau, Jerome Le

    2017-01-01

    Many numerical models for building energy simulation assume empty rooms and do not account for the indoor content of occupied buildings. Furnishing elements and indoor items have complicated shapes and are made of various materials. Therefore, most of the people prefer to ignore them. However, th......, it is shown that the integration of phase change materials in wallboards or furniture elements can appreciably improve the energy flexibility of buildings....

  12. INVESTIGATION OF THE EFFECTS OF DIFFERENT EDGE JOINT ELEMENTS ON DIAGONAL TENSILE STRENGTH IN FURNITURE EDGE JOINTS

    Directory of Open Access Journals (Sweden)

    Arif GÜRAY

    2002-01-01

    Full Text Available In this work, the diagonal tensile strength of furniture edge joints such as wooden dowel, minifix, and alyan screw was investigated in panel-constructed boards for Suntalam and MDF Lam. For this purpose, a diagonal tensile strength test was applied to the 72 samples. According to the results, the maximum diagonal tensile strength was found to be in MDF Lam boards that jointed with alyan screw.

  13. Certificação florestal e o mercado moveleiro nacional Forest certification and furniture national market

    Directory of Open Access Journals (Sweden)

    Ricardo Ribeiro Alves

    2009-06-01

    Full Text Available O objetivo deste trabalho foi avaliar a inserção da certificação florestal no mercado moveleiro nacional. Para a realização deste estudo, utilizaram-se dados do Conselho de Manejo Florestal (FSC Brasil e dados obtidos por meio de questionários aplicados às empresas moveleiras que possuíam produtos certificados. A certificação mostrou-se presente nas empresas do Estado de São Paulo e da Região Sul, principalmente entre aquelas ligadas à exportação. As empresas da indústria moveleira voltadas para o mercado interno não demonstraram maior interesse na certificação florestal em função da baixa exigência dos clientes.The objective of this work was to evaluate the insertion of forest certification in the national furniture market. The data used for the accomplishment of the present study came from the Forest Stewardship Council (FSC Brazil and the questionnaires applied to the furniture companies with certified products. Companies in the State of São Paulo and in the South Region presented certification, mainly the exporting companies. The furniture companies intended to provide the domestic market did not demonstrate great interest in forest certification because customers did not demand it.

  14. Cigarette Fires Involving Upholstered Furniture in Residences: The Role that Smokers, Smoker Behavior, and Fire Standard Compliant Cigarettes Play

    Science.gov (United States)

    Butry, David T.; Thomas, Douglas S.

    2017-01-01

    Residential structure fires pose a significant risk to life and property. A major source of these fires is the ignition of upholstered furniture by cigarettes. It has long been established that cigarettes and other lighted tobacco products could ignite upholstered furniture and were a leading cause of fire deaths in residences. In recent years, states have adopted fire standard compliant cigarettes (‘FSC cigarettes’) that are made with a wrapping paper that contains regularly spaced bands, which increases the likelihood of self-extinguishment. This paper measures the effectiveness of FSC cigarettes on the number of residential fires involving upholstered furniture, and the resulting fatalities, injuries, and extent of flame spread, while accounting for the under-reporting of fire incidents. In total, four models were estimated using fire department data from 2002 to 2011. The results provide evidence that FSC cigarettes, on average, reduced the number of residential fires by 45 %, reduced fatalities by 23 %, and extent of flame spread by 27 % in 2011. No effect on injuries was found. Within each state, effectiveness is moderated by the number of smokers and their consumption patterns. In general, FSC cigarettes are more effective in places with a large smoking population who engage in heavier smoking. There is a very limited effect on the lightest of smokers, suggesting behavioral differences between heavy and light smokers that influence fire risk. PMID:28751788

  15. Workers' dermal exposure to UV-curable acrylates in the furniture and Parquet industry.

    Science.gov (United States)

    Surakka, J; Lindh, T; Rosén, G; Fischer, T

    2000-12-01

    The use of ultraviolet radiation-curable coatings (UV-coatings) has increased rapidly in the parquet and furniture industry. Work with UV-coatings involves risk from skin exposure to chemically reactive, concentrated acrylates that are known skin contact irritants and sensitizers. Yet, the methods and tools for measuring and quantifying dermal exposure from hazardous chemicals directly on the skin are limited and methods to measure skin exposure to UV-coatings in occupational or environmental settings have been lacking. Skin exposure to UV-coatings was measured employing a quantitative tape stripping method that we have developed for this purpose. A pilot study was performed at three workplaces. In the main study, workers' skin exposure to uncured UV-coatings was measured at seven workplaces and on two separate workdays (rounds 1 and 2) within a six-month period to determine exposure variation. Skin exposure was measured at four standardized sites on the hand, 3-4 times per work shift. The forehead was sampled once. A questionnaire was carried out with the workers in both rounds to find out factors that can affect skin exposure to UV-coatings. The pilot study indicated that both skin and surface contamination to TPGDA-containing UV-coatings were common and varied up to 2110 microgram on the sampling area of 10cm(2). In the main study skin contamination due to TPGDA was found on 16 of 23 workers, at 6 out of the 7 workplaces, and from 36 (5. 4%) of the 664 samples. In round one 8.6% (n=383) of the samples contained TPGDA and in round two 1.1 % (n=281). The average TPGDA mass on all the positive samples (n=36) was 30.4+/-77.0 microgram for the first and second rounds alone this mass was 30.6+/-80 (n=33) and 28.3+/-16.5 microgram (n=3), respectively. Despite the limited sampling area and sampling sites, we could find residues of TPGDA at all sampling times, even at the beginning of the work shift. This may be due to transfer of UV-coatings through contaminated

  16. [Assessment of occupational exposure to wood dust in the Polish furniture industry].

    Science.gov (United States)

    Szewczyńska, Małgorzata; Pośniak, Małgorzata

    2017-02-28

    Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Total dust concentrations were 0.84-13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34-22.13 mg/m3. Respirable fraction concentrations were 0.38-4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV) for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1):45-60. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  17. Case series

    African Journals Online (AJOL)

    abp

    16 déc. 2015 ... ... d'Oncologie Médicale, Institut National d'Oncologie de Rabat, CHU Ibn Sina, BP 6213 Rabat, Maroc ..... plus actif que l'administration en continue [4]. ... formation de ponts stables, par des liaisons covalentes, entre les.

  18. Exposures series

    OpenAIRE

    Stimson, Blake

    2011-01-01

    Reaktion Books’ Exposures series, edited by Peter Hamilton and Mark Haworth-Booth, is comprised of 13 volumes and counting, each less than 200 pages with 80 high-quality illustrations in color and black and white. Currently available titles include Photography and Australia, Photography and Spirit, Photography and Cinema, Photography and Literature, Photography and Flight, Photography and Egypt, Photography and Science, Photography and Africa, Photography and Italy, Photography and the USA, P...

  19. Institutional advantage

    NARCIS (Netherlands)

    Martin, Xavier

    Is there such a thing as institutional advantage—and what does it mean for the study of corporate competitive advantage? In this article, I develop the concept of institutional competitive advantage, as distinct from plain competitive advantage and from comparative institutional advantage. I first

  20. Evolutionary institutionalism.

    Science.gov (United States)

    Fürstenberg, Dr Kai

    Institutions are hard to define and hard to study. Long prominent in political science have been two theories: Rational Choice Institutionalism (RCI) and Historical Institutionalism (HI). Arising from the life sciences is now a third: Evolutionary Institutionalism (EI). Comparative strengths and weaknesses of these three theories warrant review, and the value-to-be-added by expanding the third beyond Darwinian evolutionary theory deserves consideration. Should evolutionary institutionalism expand to accommodate new understanding in ecology, such as might apply to the emergence of stability, and in genetics, such as might apply to political behavior? Core arguments are reviewed for each theory with more detailed exposition of the third, EI. Particular attention is paid to EI's gene-institution analogy; to variation, selection, and retention of institutional traits; to endogeneity and exogeneity; to agency and structure; and to ecosystem effects, institutional stability, and empirical limitations in behavioral genetics. RCI, HI, and EI are distinct but complementary. Institutional change, while amenable to rational-choice analysis and, retrospectively, to criticaljuncture and path-dependency analysis, is also, and importantly, ecological. Stability, like change, is an emergent property of institutions, which tend to stabilize after change in a manner analogous to allopatric speciation. EI is more than metaphorically biological in that institutional behaviors are driven by human behaviors whose evolution long preceded the appearance of institutions themselves.

  1. ORC technology for waste-wood to energy conversion in the furniture manufacturing industry

    Directory of Open Access Journals (Sweden)

    Moro Riccardo

    2008-01-01

    Full Text Available Exploitation of low and medium temperature thermal sources, in particular those based on biomass combustion and on industrial residual heat recovery, has been increasingly investigated in the last decades, accordingly to the growing interest towards reduction in primary energy consumption and environmental issues. Organic Rankine cycle technology allows designing power plants that are less demanding in terms of auxiliaries, safety systems, maintenance and operating costs when compared to conventional water steam power plants. To support the preliminary technical and economic design of this kind of plants in different contexts, a simulation code of part load and off-design operation of an organic Rankine cycle unit for combined heat and power has been developed. In the paper, taking the real situation of a furniture manufacturing factory as a starting point, it is shown how all energy flows occurring all year long inside the combined heat and power plant, can be estimated on the basis of the thermal user duty time profile, the available biomass flow rate and the adopted operation strategy. This information is the basis in order to correctly evaluate the energetic, economic and environmental advantages of the proposed technical solution, with respect to a particular context, as it is shown in the concluding part of the paper.

  2. CONTRIBUTION OF COMPUTATIONAL SIMULATION FOR LAYOUT ANALYSIS IN A WOODEN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Alexandre Navarro Silva

    Full Text Available ABSTRACT The objective of this study was to balance the production line and analyze the layout of the sewing sector in a furniture industry. Using the Arena software, a simulation model was constructed that represented the real system consisting of a cellular layout with 3 groups of 5 seamstresses, who produced 57 different types of products divided into three families, in a daily working day of 625 minutes in the months of February to August and 725 minutes in the months of September to January. The model was quantitatively validated among the managers of the studied industry. The obtained results allowed conclusions with an error of less than 1% in the daily quantity of pieces produced with 99% statistical confidence. Therefore, three scenarios related to the organization of the work environment and the balancing of the production line were constructed, and those include: i linear layout, and the balancing allowed the division of five seamstresses for families 1 and 2, and three seamstresses for family 3; ii study of the layout by processes, so that the best balance was constituted of two groups with seven seamstresses; iii similar to scenario 2 but with six seamstresses in group 1 and seven seamstresses in group 2. It was verified that the modified, alternative scenario 2 is more advantageous for the organization, since it presents greater productivity compared to all other scenarios and to the real system, so the company can increase its production capacity by simply modifying the layout and organizing the work environment.

  3. Occupational asthma in the furniture industry: is it due to styrene?

    Science.gov (United States)

    Oner, Ferda; Mungan, Dilşad; Numanoglu, Numan; Demirel, Yavuz

    2004-01-01

    Styrene, a volatile monomer, has been reported as a cause of occupational asthma in a few case reports. The aim of this study was to investigate the risk for asthma in relation to exposure to styrene in a large number of workers. A total of 47 workers with a history of exposure to styrene were included in the study. To establish whether asthma was present, each patient underwent a clinical interview, pulmonary function testing and bronchial challenge with methacholine. Specific bronchial challenges with styrene and serial peak expiratory flow (PEF) measurement at home and at work were carried out in subjects with a diagnosis of asthma to evaluate the relationship between their asthma and exposure to styrene in the workplace. Among the 47 subjects, 5 workers had given a history of work-related symptoms, and 3 of them had a positive methacholine challenge test. Specific bronchial challenges with styrene and serial PEF measurement were subsequently carried out in these 3 subjects. Although provocation tests with styrene were negative in the 3 workers, 1 worker had PEF rate records compatible with occupational asthma. We established one patient with occupational asthma from a group of people who have excessive styrene exposure. This finding may be suggestive but is not conclusive about the causative role of styrene in occupational asthma. Since styrene is a frequently used substance in the furniture industry, it is worth performing further studies to investigate the relationship between styrene and occupational asthma. Copyright 2004 S. Karger AG, Basel

  4. Sustainable-value stream mapping to evaluate sustainability performance: case study in an Indonesian furniture company

    Directory of Open Access Journals (Sweden)

    Hartini Sri

    2018-01-01

    Full Text Available Lean manufacturing tools do not consider environmental and societal benefits. The conventional value stream mapping (VSM methodology examines the economics of a manufacturing line, most of which are in regards to time (cycle time, lead time, change-out time, etc.. Incorporating the capability to capture environmental and societal performance visually through VSMs will increase its usefulness as a tool that can be used to assess manufacturing operations from a sustainability perspective. A number of studies have addressed the extension of VSM to incorporate additional criteria. A vast majority of these efforts have focused on adding energy-related metrics to VSMs, while several other studies refer to ‘sustainable’ VSM by including environmental performance in conventional VSMs. This research has developed a method for VSM integrated with environment metric and social metric for ensuring sustainable manufacture. The proposed technique is capable of visualizing and evaluating manufacturing process performance from sustainability view point. The capability of proposed technique has been tested by an application study on furniture company. The study provides insights to practitioners to visualize process performance in economic, environment and social metric.

  5. Working conditions and effects of ISO 9000 in six furniture-making companies: implementation and processes.

    Science.gov (United States)

    Karltun, J; Axelsson, J; Eklund, J

    1998-08-01

    What effects will the implementation of the quality standard ISO 9000 have regarding working conditions and competitive advantages? Which are the most important change process characteristics for assuring improved working conditions and other desired effects? These are the main questions behind this study of six furniture-making companies which implemented ISO 9000 during the period 1991-1994. The results show that customer requirement was the dominant goal to implement ISO 9000. Five of the six companies succeeded in gaining certification. The influence on working conditions was limited, but included better order and housekeeping, more positive attitudes towards discussing quality shortcomings, a few workplace improvements, work enrichment caused by additional tasks within the quality system and a better understanding of external customer demands. Among the negative effects were new, apparently meaningless, tasks for individual workers as well as more stress and more physically strenuous work. The effects on the companies included a decrease in external quality-related costs and improved delivery precision. The study confirms the importance for efficient change of the design of the change process, and identifies 'improvement methodology' as the most important process characteristic. Improved working conditions are enhanced by added relevant strategic goals and by a participative implementation process.

  6. Materials Used for the Production of Upholstered Furniture Like Source of Odors in Interior

    Directory of Open Access Journals (Sweden)

    Petr Čech

    2014-01-01

    Full Text Available This paper investigates the problematic of VOC emissions and their assessment by olfactory methods. The main goal of this contribution is determine the odors emitted by upholstery fabrics used for upholstered furniture. This contribution researches the correlation between the results, which were obtained by the olfactory assessment and the results of the measurements of volatile organic compounds (VOCs emitted by choose the kind of covering textiles. This research judged the influence of upholstery fabrics with different chemical composition (polyester, cotton and mixture of viscose and cotton on olfactometric assessment. It was mainly focused on the determination of Hedonic tone and intensity of the odor. These olfactometric characteristics were determined using an equipment Sniffer 9000. Concurrently was also assessed the influence of climatic conditions in small space chamber on olfactometric assessment of tested materials. The climatic conditions differed mainly in terms of temperature and relative humidity in small space chamber. The results are compared with sensory perceptions and the qualitative and quantitative analysis of VOCs performed by using the gas chromatograph Agilent GC 6790 with mass spectrometer detector 5973. The experimental section shows that, the various types of criticized upholstery fabrics with different chemical composition emitted relatively low concentrations of VOC emissions. It was also demonstrated the influence of climatic conditions on VOC emissions and while on their olfactometric assessment. The tested materials of upholstery fabric showed very intensive olfactory sensation, which were described as very unpleasant (−4 in some cases.

  7. Social Phenomenological Study of Strategic Action in the Cluster of Furniture

    Directory of Open Access Journals (Sweden)

    Fernanda Maria Felicio Macedo

    2013-09-01

    Full Text Available The research carried out on the following strategic phenomenon, for the most part, the guidelines of the functionalist paradigm. This production has its relevance in the scientific community, however, does not cover the strategy in all its complexity. In this scenario, it is intended to address the strategy from the assumptions of social phenomenology, an online research study focused on the action. Social action is the experience of the phenomenon. For this, research is carried out "for reasons" and "why reasons" present in strategic action. The relevance of this study is to address the strategy as a phenomenon that exists because of the social subject, which may show that its essence transcends the limits of individuality, because thinking is based on the phenomenological social awareness of the existence of the other. Held semi-structured interviews with fourteen strategists operating in cluster of furniture Bento Gonçalves, and the data analyzed according to the phenomenological approach of Sanders (1982. As a result, it follows that the "why reasons" are the 'becoming' and expertise, and the "for reasons": the search for freedom in corporate decision making and building a legacy. We conclude that the meaning of strategic action is not isolated, being linked to several factors related to the existential project of the strategist.

  8. Institutional entrepreneurship:

    DEFF Research Database (Denmark)

    Gretzinger, Susanne

    2018-01-01

    Institutional entrepreneurship pays specific attention to the process and outcomes of agents who are willing and capable of changing institutions. It has some common ground with the political entrepreneur, a concept that proposes change in norms and institutions because of commitment and activities...... of agents or organisations in the policy arena. The present chapter understands institutional entrepreneurship as the process of changing institutionalised practices. Based on a literature review, it describes the triggers, activities and potential effects of institutional entrepreneurs. The chapter...... concludes by tentatively arguing that political entrepreneurs can be institutional entrepreneurs, but institutional entrepreneurship can be considered as the broader concept that incorporates strategies and visions as well as interpretative-discursive power into the conceptual framework....

  9. IAEA paper on institutional arrangements

    International Nuclear Information System (INIS)

    1979-01-01

    At its fifth series of meetings, Working Group 3 received a background paper prepared by the IAEA which had a threefold purpose: firstly, to provide an overview on institutional arrangements under consideration by the INFCE Working Groups; secondly, to explore potential relationships between the various institutional arrangements under consideration; and thirdly, to identify areas where further analysis might be desirable

  10. Carel Breytspraak Sr., Purveyor to his Majesty King Louis Napoleon. Breytspraak furniture from the collection of the Royal Palace in Amsterdam

    Directory of Open Access Journals (Sweden)

    Paul van Duin

    2013-06-01

    Full Text Available In 1808, King Louis Napoleon had the town hall of Amsterdam converted to Royal Palace. Besides making the necessary architectural alterations, he ordered hundreds of pieces of furniture and other ornamental objects from local furniture makers, upholsterers, decorators and other suppliers. This collection of Empire furniture, which is still preserved in the palace, is today the largest of its kind outside France. Between 2005 and 2009, these pieces of furniture were restored as part of the wider restoration of the entire palace, a gigantic operation that involved hundreds of restoration experts. A furniture committee made sure that quality and looks remained uniform. During the process the restoration experts and researchers made a full study of the furniture, documenting finds and findings, supplemented with research into the origins, the makers, use, techniques and material. This is unique for the Netherlands. The data, recorded in documentation and restoration reports, offer fresh insights in especially the construction and manufacturing process of Dutch Empire furniture. The discoveries are illustrated by a number of purveyances by Carel Breytspraak Sr. (1769-1810, the best paid furniture maker of the king. The 100 chairs he made for the Grand dining room of the palace are an example of pre-modern serial production. This may be inferred from the varying quality of the wood that was used and from the varying thickness of the seat stretchers, among other things. Furthermore, it turned out that the chairs still had the original stuffing, which was reused after having been restored. One chair still had the original upholstery from the days of Louis Napoleon and this was used as the basis for the current upholstery. The chairs are typical examples of furniture made after French decoration prints, which were undoubtedly provided by the king’s architects. The roll-top desk that Breytspraak made for the king’s bedroom is one of the most unique

  11. Case Series.

    Science.gov (United States)

    Vetrayan, Jayachandran; Othman, Suhana; Victor Paulraj, Smily Jesu Priya

    2017-01-01

    To assess the effectiveness and feasibility of behavioral sleep intervention for medicated children with ADHD. Six medicated children (five boys, one girl; aged 6-12 years) with ADHD participated in a 4-week sleep intervention program. The main behavioral strategies used were Faded Bedtime With Response Cost (FBRC) and positive reinforcement. Within a case-series design, objective measure (Sleep Disturbance Scale for Children [SDSC]) and subjective measure (sleep diaries) were used to record changes in children's sleep. For all six children, significant decrease was found in the severity of children's sleep problems (based on SDSC data). Bedtime resistance and mean sleep onset latency were reduced following the 4-week intervention program according to sleep diaries data. Gains were generally maintained at the follow-up. Parents perceived the intervention as being helpful. Based on the initial data, this intervention shows promise as an effective and feasible treatment.

  12. Colonial Institutions

    DEFF Research Database (Denmark)

    McAtackney, Laura; Palmer, Russell

    2016-01-01

    and the USA which reveal that the study of colonial institutions should not be limited to the functional life of these institutions—or solely those that take the form of monumental architecture—but should include the long shadow of “imperial debris” (Stoler 2008) and immaterial institutions....

  13. Surface contamination to UV-curable acrylates in the furniture and parquet industry.

    Science.gov (United States)

    Surakka, J; Lindh, T; Rosén, G; Fischer, T

    2001-03-01

    Surface contamination to ultraviolet radiation curable coatings (UV coatings), used increasingly in the parquet and furniture industry, is a matter of concern as a source for skin contamination. UV coatings contain chemically and biologically reactive acrylates, well known as skin contact irritants and sensitizers. Surface contamination may spread secondarily to equipment and other unexpected areas even outside the workplace. Yet, studies concerning this type of contamination are lacking due to lack of suitable sampling methods. Surface contamination of the work environment with risk for skin exposure to UV coating was measured employing a quantitative adhesive tape sampling method developed for this purpose. A pilot study was first performed at three workplaces to evaluate the contamination. In the main study, we wanted to locate and identify in detail the surface contamination of areas where problems exist, and to determine the extent of the problem. Measurements were performed at seven workplaces on two separate workdays (round 1 and 2) within a six-month period. Samples were collected from the workplaces based on the video monitoring of skin contact frequency with the surfaces and categorized into three groups to analyze risk. The pilot study indicated that surface contamination to TPGDA containing UV coatings was common, found in 76 percent of the surfaces, and varied with a maximum of 909 microg TPGDA 10 cm(-2) sampling area. In the main study TPGDA was found in 153 out of 196 collected samples (78.1%); for round one 78.1 percent (82 out of 105 samples) and for round two 78.0 percent (71 out of 91 samples). The average TPGDA mass on positive surface samples was on the first round 2,247 +/- 7,462 microg, and on the second round 2,960 +/- 4,590 microg. We conclude that surface contamination to uncured UV coatings at UV-curing lines is common and this involves a risk for harmful, unintentional skin exposure to acrylates.

  14. Institutional upbringing

    DEFF Research Database (Denmark)

    Gulløv, Eva

    2008-01-01

    In the chapter, I discuss the role day care institutions play in the construction of the idea of proper childhood in Denmark. Drawing on findings from research on ethnic minority children in two Danish day care institutions, I begin with a discussion of how childcare institutions act as civilising...... agents, empowered with the legitimate right to define and control normality and proper ways of behaving oneself. I aim to show how institutions come to define the normal child and proper childhood in accordance with current efforts toward reinventing national culture, exemplified by legislation requiring...... current testing of Danish language fluency levels among pre-school minority children. Testing language skills marks and defines distinctions that reinforce images of deviance that, in turn, legitimize initiatives to enrol children, specifically minority children, in child care institutions....

  15. Medical Entomology Studies - XIII. The Myzomyia Series of Anopheles (Cellia) in Thailand, with Emphasis on Intra-Interspecific Variations (Diptera: Culicidae) (Contributions of the American Entomological Institute. Volume 17, Number 4, 1980)

    Science.gov (United States)

    1980-01-01

    pinpoint the collection site as Fang District, Chiang Mai Province in June 1952. However, no specimens confirming the record have been found in the...members of the Myzomyia Series in Thailand were in Barnes (1923a, b), who recorded aconitus from Bangkok and Chiang Mai , culicifacies from Chiang Mai , fluviatilis...as funestus Giles, = listoni Liston) from Bangkok and Chiang Mai and minimus from Bangkok. Barnes (1923b) also contained a key to the

  16. DCP Series

    Directory of Open Access Journals (Sweden)

    Philip Stearns

    2011-06-01

    Full Text Available Photo essay. A collection of Images produced by intentionally corrupting the circuitry of a Kodak DC280 2 MP digitalcamera. By rewiring the electronics of a digital camera, glitched images are produced in a manner that parallels chemically processing unexposed film or photographic paper to produce photographic images without exposure to light. The DCP Series of Digital Images are direct visualizations of data generated by a digital camera as it takes a picture. Electronic processes associated with the normal operations of the camera, which are usually taken for granted, are revealed through an act of intervention. The camera is turned inside­out through complexes of short­circuits, selected by the artist, transforming the camera from a picture taking device to a data capturing device that renders raw data (electronic signals as images. In essence, these images are snap­shots of electronic signals dancing through the camera's circuits, manually rerouted, written directly to the on­board memory device. Rather than seeing images of the world through a lens, we catch a glimpse of what the camera sees when it is forced to peer inside its own mind.

  17. Clusters or the Early Internationalisation of Entrepreneurial Behaviour as Explanations for the Exceptional Success of the Danish Furniture Industry?

    DEFF Research Database (Denmark)

    Howells, John; Hedemann, Lars

    This article contrasts two explanations of the economic success of the Danish furniture industry. The first is that success derives from learning processes within firm clusters and the second is a path dependent 'regional learning' theory, that early, post World War 2 overseas demand created...... for two principal reasons; today there has been a sharp decline in the economic significance of the firms in the West Jutland industrial districts while ten large internationalised firms scattered and not clustered within Denmark account for half of industry turnover. This suggests the primacy...

  18. Preliminary study on the gamma radiation on the furniture carpet beetle Anthrenus flavipes LeConte (Coleoptera : Dermestidae)

    International Nuclear Information System (INIS)

    Hamad, B.Sh.; Khalaf, M.Z.; Jumaa, H.M.; Yasseen, N.H.; Al-Taweel, A.A.

    2006-01-01

    Preliminary study on the possibility of using gamma radiation to induce sexual sterility in males of the furniture carpet beetle A. Flavipes was carried out as a part of programme aiming to use SIT in controlling this pest. Results indicated that the induction of complete sterility in males was occurred by irradiated them as adults (24 hours old) by 100, 130 and 150 Gy. Furthermore, Results also showed that there was reducing in average number eggs laid by female that mated with irradiated male in comparison with females that matted with normal males

  19. Impact of the Financial Crisis of 2008 on Furniture Industry in the Czech Republic and Development of Tangible Fixed Assets in 2005– 2012 and its Possible Renewal

    Directory of Open Access Journals (Sweden)

    Tomáš Najbrt

    2016-01-01

    Full Text Available This paper is focused on furniture firms in the Czech Republic during the period 2005–2012, which covers the year of the crisis. The aim was to assess the given economic situation of the manufacturing businesses comparing some of the economic indicators such as tangible fixed assets, revenue from own production and services, pre-tax profit and labor costs. The study was conducted in the Czech Republic using the data provided by the Czech Statistical Office. Results for the specified period and selected groups of micro furniture companies are shown; dependence of economic indicators within the given time period is also analyzed. The analysis has shown that the smallest of the firms were least affected by the economic crisis; moreover, the medium-sized of the companies exhibit tangible assets growth and certain degree of inertia in years 2008 and 2009. Finally, possibilities how the micro furniture companies could proceed when purchasing new technologies are outlined.

  20. Institutional actorhood

    DEFF Research Database (Denmark)

    Madsen, Christian Uhrenholdt

    In this paper I describe the changing role of intra-organizational experts in the face of institutional complexity of their field. I do this through a qualitative investigation of the institutional and organizational roles of actors in Danish organizations who are responsible for the efforts...... to comply with the Danish work environment regulation. And by doing so I also describe how institutional complexity and organizational responses to this complexity are particular important for the changing modes of governance that characterizes contemporary welfare states....

  1. Institutional Investors

    DEFF Research Database (Denmark)

    Birkmose, Hanne Søndergaard; Strand, Therese

    Research Question/Issue: Institutional investors are facing increased pressure and threats of legislation from the European Union to abandon passive ownership strategies. This study investigates the prerequisites for – and potential dissimilarities in the practice of, active ownership among...... institutional investors in two Scandinavian countries with diminutive legal and cultural distance in general. Research Findings/Insights: Using data on shareholder proposals from Danish and Swedish annual general meetings from 2006 throughout 2010, we find that institutional investors are approximately....../Policy Implications: Regulators should be aware of the impact by local governance mechanisms, and how shareholders react under different legal and practical prerequisites. The paper also highlights legal elements that differ between Denmark and Sweden, and which might affect institutional activism....

  2. Institutional Controls

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of institutional control data from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different...

  3. Institutional Assessment

    International Development Research Centre (IDRC) Digital Library (Canada)

    Many approaches can and have helped research institutions in the developing .... There are many good texts on project and program evaluation, not to ...... has challenged managers and students of organizational development for decades.

  4. Expanding public-private collaborations to enhance cancer drug development: a report of the Institute of Medicine's workshop series, "Implementing a National Cancer Clinical Trials System for the 21st Century".

    Science.gov (United States)

    Bertagnolli, Monica M; Canetta, Renzo; Nass, Sharyl J

    2014-11-01

    Since their inception in the 1950s, the National Cancer Institute-funded cancer cooperative groups have been important contributors to cancer clinical and translational research. In 2010, a committee appointed by the Institute of Medicine (IOM) of the National Academy of Sciences completed a consensus review on the status of the U.S. publicly funded cancer clinical trials system. This report identified a need to reinvigorate the cooperative groups and provided recommendations for improving their effectiveness. Follow-up workshops to monitor progress were conducted by the IOM's National Cancer Policy Forum and the American Society of Clinical Oncology (ASCO) in 2011 and 2013. One of the key recommendations of the IOM report was a call for greater collaboration among stakeholders in cancer research. In particular, more active engagement and better alignment of incentives among the cooperative groups, the National Cancer Institute, the U.S. Food and Drug Administration, and the biopharmaceutical industry were identified as essential to achieving the promise of oncology drug development. This review, based on presentations and discussion during the IOM-ASCO workshops, outlines the progress and remaining challenges of these collaborations. ©AlphaMed Press.

  5. Expanding Public-Private Collaborations to Enhance Cancer Drug Development: A Report of the Institute of Medicine’s Workshop Series, “Implementing a National Cancer Clinical Trials System for the 21st Century”

    Science.gov (United States)

    Canetta, Renzo; Nass, Sharyl J.

    2014-01-01

    Since their inception in the 1950s, the National Cancer Institute-funded cancer cooperative groups have been important contributors to cancer clinical and translational research. In 2010, a committee appointed by the Institute of Medicine (IOM) of the National Academy of Sciences completed a consensus review on the status of the U.S. publicly funded cancer clinical trials system. This report identified a need to reinvigorate the cooperative groups and provided recommendations for improving their effectiveness. Follow-up workshops to monitor progress were conducted by the IOM’s National Cancer Policy Forum and the American Society of Clinical Oncology (ASCO) in 2011 and 2013. One of the key recommendations of the IOM report was a call for greater collaboration among stakeholders in cancer research. In particular, more active engagement and better alignment of incentives among the cooperative groups, the National Cancer Institute, the U.S. Food and Drug Administration, and the biopharmaceutical industry were identified as essential to achieving the promise of oncology drug development. This review, based on presentations and discussion during the IOM-ASCO workshops, outlines the progress and remaining challenges of these collaborations. PMID:25326161

  6. WDM Research Series: Working Paper No. 2

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    The other three papers of the Series focus on the issues of institutional structures ... Any approach that relates WDM to poverty and equity requires a set of working ..... If local irrigation system operation and maintenance investments and.

  7. Designing Business System Model using System Modeling Approach to the Small and Medium Enterprises (SME) of Furniture in Indonesia

    Science.gov (United States)

    Sukendar, Irwan; Fatmawati, Wiwiek; Much Ibnu Subroto, Imam; Arigama, Rizki

    2017-04-01

    This paper studies the design of business system model with System Modeling Approach on small and medium enterprises (SMEs) of furniture. Methods used consists of five phases: phase of identification of business processes actual on SMEs of Furniture, phase of identification of deficiencies and improvement of business processes, phase of design algorithm and flowchart business processes, phase of analysis of the elements of the system, and phase of the design of data flow diagram (DFD), The results of the analysis of the elements of the system are: Products and quantities ordered product consumers and DP paid by consumers identified as elements of system inputs 1,2 and 3. The result of the calculation, payment slips and mail order (SO) are identified as elements of system output 1, 2 and 3. Acceptance of orders, stocks checking of raw materials at the warehouse, calculating raw material requirements, adequacy of raw materials, the price of the contract, and the due date, as well as the submission of the results of calculations to consumers were identified as elements of system components 1, 2, 3, and 4. Admin taking orders, Admin check stocks of raw materials at the warehouse, Admin making calculation, and Admin convey the results of calculations to consumers were identified as an element of interaction system 1, 2, 3, and 4. Consumers were identified as element of environmental systems. Moreover, the boundary between SMEs and consumers were identified as elements of the system boundary.

  8. [Manufacture of upholstered furniture and work-related upper limb musculoskeletal disorders: an industrial sector prevention project].

    Science.gov (United States)

    Di Leone, G; Carino, M; Nicoletti, S; Trani, G; Ambrosi, L

    2008-01-01

    In cooperation with the IRCCS Fondazione Maugeri and the IRCCS Fondazione Ospedale Maggiore Policlinico - EPM-CEMOC, of Milan, the Local Health Unit in Bari, Italy carried out a research project, sponsored partly by the Italian Ministry of Health, on upper limb work-related musculoskeletal disorders (UL-WMSDs) in a specific manufacturing sector, the upholstered furniture industry. This "sofa district" is widely represented with approximately 14,000 workers and 500 factories over a wide geographic area of southern Italy. Advanced technology in the manufacturing process is combined with workers performing intensive arm-hand tasks. The aim of the study included: a) assessment of exposure to repetitive strain and movements of the upper limb in a representative sample of the factories using the OCRA method, b) analysis of the annual prevalence and incidence rates, c) definition of possible improvement via ergonomic solutions in the various factories. Via a network of occupational physicians a total of more than 6000 subjects were examined over a 5-year period. Case-definition was assessed through standardized procedures. A detailed description of the manufacturing process of the upholstered furniture industry and of the characteristics of the working population is provided Exposed groups at risk were:filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Data collected in private companies of different size in this extensive industrial "sofa area" emphasize the importance of prevention through adequate ergonomic solutions and the need to improve training programmes covering the whole area.

  9. Institutional Awareness

    DEFF Research Database (Denmark)

    Ahlvik, Carina; Boxenbaum, Eva

    Drawing on dual-process theory and mindfulness research this article sets out to shed light on the conditions that need to be met to create “a reflexive shift in consciousness” argued to be a key foundational mechanism for agency in institutional theory. Although past research has identified...... in consciousness to emerge and argue for how the varying levels of mindfulness in the form of internal and external awareness may manifest as distinct responses to the institutional environment the actor is embedded in....

  10. European Institutions?

    NARCIS (Netherlands)

    Meacham, Darian

    2016-01-01

    The aim of this article is to sketch a phenomenological theory of political institutions and to apply it to some objections and questions raised by Pierre Manent about the project of the European Union and more specifically the question of “European Construction”, i.e. what is the aim of the

  11. Institution Morphisms

    Science.gov (United States)

    Goguen, Joseph; Rosu, Grigore; Norvig, Peter (Technical Monitor)

    2001-01-01

    Institutions formalize the intuitive notion of logical system, including both syntax and semantics. A surprising number of different notions of morphisim have been suggested for forming categories with institutions as objects, and a surprising variety of names have been proposed for them. One goal of this paper is to suggest a terminology that is both uniform and informative to replace the current rather chaotic nomenclature. Another goal is to investigate the properties and interrelations of these notions. Following brief expositions of indexed categories, twisted relations, and Kan extensions, we demonstrate and then exploit the duality between institution morphisms in the original sense of Goguen and Burstall, and the 'plain maps' of Meseguer, obtaining simple uniform proofs of completeness and cocompleteness for both resulting categories; because of this duality, we prefer the name 'comorphism' over 'plain map.' We next consider 'theoroidal' morphisms and comorphisims, which generalize signatures to theories, finding that the 'maps' of Meseguer are theoroidal comorphisms, while theoroidal morphisms are a new concept. We then introduce 'forward' and 'semi-natural' morphisms, and appendices discuss institutions for hidden algebra, universal algebra, partial equational logic, and a variant of order sorted algebra supporting partiality.

  12. Heat treatment of the common furniture beetle Anobium punctatum (Coleoptera: Anobiidae), at temperature between 45 degrees and 54 degrees C. under dry and humid conditions

    DEFF Research Database (Denmark)

    Hansen, Lise Stengaard; Jensen, Karl-Martin Vagn

    1998-01-01

    The combinations of exposure times and temperatures (45 degrees to 54 degrees C.) without addition of moisture necessary to obtain 100 per cent mortality were determined on all stages of commn furniture beetle, Anobium punctatum. Lethal combinations vary from minutes at 46 degrees to 5 minutes...

  13. Identifying and prioritizing indicators and effective solutions to optimization the use of wood in construction classical furniture by using AHP (Case study of Qom

    Directory of Open Access Journals (Sweden)

    Mohammad Ghofrani

    2017-02-01

    Full Text Available AbstractThe aim of this study was to identify and prioritize the indicators and provide effective solutions to optimize the use of wood in construction classical furniture using the analytic hierarchy process (case study in Qom. For this purpose, studies and results of other researchers and interviews with experts, the factors affecting the optimization of wood consumption were divided into 4 main categories and 23 sub-indicators. The importance of the sub after getting feedback furniture producers were determined by AHP. The results show that the original surface design and human resources are of great importance. In addition, among 23 sub-effective optimization of the use of wood in construction classical furniture, ergonomics, style, skill training and inlaid in classical furniture industry in order to weight the value of 0/247, 0/181, 0/124 and 0/087 are of paramount importance and the method of use of force specialist solutions were a priority.

  14. Institutional obligation

    International Nuclear Information System (INIS)

    Rowan, S.S.; Berwager, S.D.

    1988-01-01

    The institutional obligation is to act to meet primary responsibilities in the face of risks. There are risks involved in taking action, both of a quantifiable and unquantifiable nature. This paper explores weighing the risks, choosing approaches that balance primary obligations with broader ones, and presenting ethical philosophies upon which policies and strategies are based. Federal government organizations and utilities--and Bonneville Power Administration qualifies as both--have a variety of responsibilities to the public they serve. The common responsibility is that of service; for Bonneville the primary responsibility is to serve the energy related needs. It is this primary institutional obligation, as it relates to other responsibilities--and the resulting strategy for handling indoor air quality in Bonneville's new homes program--that this paper examines

  15. Jakartans, Institutionally Volatile

    Directory of Open Access Journals (Sweden)

    Masaaki OKAMOTO

    2014-01-01

    Full Text Available Jakarta recently has gained even more central political attention in Indonesia since Joko Widodo (Jokowi and Basuki Purnama (Ahok became, respectively, the province’s governor and vice-governor in 2012. They started a series of eye-catching and populist programmes, drawing popular support from not only the people of Jakarta, but also among Indonesians in general. Jokowi is now even the most popular candidate for the presidential election in 2014. Their rise is phenomenal in this sense, but it is understandable if we look at Jakartan voters’ behaviour and the institutional arrangement that leads to it. Jakarta, as the national capital, has a unique arrangement in that the province has no autonomous regency or city. This paper argues that this arrangement causes Jakartans to be more politically volatile and describes how this institutional arrangement was created by analysing the minutes of the meeting to discuss the laws concerning Jakarta Province.

  16. ENVIRONMENTAL TECHNOLOGY PROTOCOL VERIFICATION REPORT, EMISSIONS OF VOCS AND ALDEHYDES FROM COMMERCIAL FURNITURE (WITH APPENDICES)

    Science.gov (United States)

    As part of a U.S. Environmental Protection Agency Environmental Technology Verification program, the Research Triangle Institute (RTI) developed a test protocol for measuring volatile organic compounds and aldehydes in a large chamber. RTI convened stakeholders for the commercial...

  17. FUNDING PUBLIC INSTITUTIONS IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Florin-Constantin, DIMA

    2014-11-01

    Full Text Available The development of this article started from the fact that in the field of public institutions accounting there have been many changes and it aims to capture the essential aspects of their financing. Thus the article covers a series of issues related to the credit officers, to employment, to settlement and payment of public institutions expenditure, to the budgeting and budgetary credits accounting. It also presents a brief classification of the public institutions according to several criteria, as well as their financing sources. The paper also practically presents the accounting of the budgetary credits and their sharing mechanism between the principal, secondary and tertiary budgetary credits officers.

  18. Characteristic and Preferences of Green Consumer Stratification As Bases to Formulating Marketing Strategies of Ecolabel-Certified Furniture

    Directory of Open Access Journals (Sweden)

    Ririn Wulandari

    2012-06-01

    question. The components used were: satisfaction, safety, socialization, and sustainability, as well as government policies which could open markets. The respondents were 408 potential consumers in Jakarta and its surroundings. The method used was purposive and convenience sampling, in which the survey was conducted at exhibitions and showrooms. Ward Method, Stepwise Discriminant Analysis and Biplot Analysis were used to generate consumer stratifications. Before that, reliability tests were conducted using Crombach Alpha method. In addition, data was explored and reduced using Component Principle Analysis. Preference analysis was performed using the method proposed by Thurston Case V. This study results four stratifications of green consumers. There were similarities and differences in preference on each of the stratification of the component of green marketing strategy as well as the marketing strategies of furniture-certified ecolabel for the targeted consumers.

  19. Enhancing Local Designers Skill in Rattan Furniture Industries in Cirebon through Comprehensive-Design Approach Regarding Buyers’ Dependencies Prevention

    Directory of Open Access Journals (Sweden)

    Andar Bagus Sriwarno

    2009-07-01

    Full Text Available Between the 1970s and the 1990s, the Indonesian economy has been transforming from an agriculture-based to an industry-based economy. According to this condition, Cirebon growth rapidly to export rattan goods even this city has no resources in rattan. The lack of design quality, export regulation and global economic crisis become the main factor to affect the decrease of company’s income at recent. Despite the crisis, government is now trying to recover by inviting design expert to improve design skills and capacity building of entrepreneurs in particular small-medium scale enterprises. This study aims to define why Cirebon still lags behind in industrial competitiveness regarding rattan furniture design. The intervention program of design is conducted to seek out the craftsman’s ability and determined the kind of design competitiveness advantages according their nature of business.

  20. Numerical Analysis of the Influence of Thermal Mass, Phase Change Materials and Furniture / Indoor Content on Building Energy Flexibility

    DEFF Research Database (Denmark)

    Johra, Hicham; Heiselberg, Per Kvols; Dreau, Jerome Le

    2017-01-01

    Many numerical models for building energy simulation assume empty rooms and do not account for the indoor content of occupied buildings. Furnishing elements and indoor items have complicated shapes and are made of various materials. Therefore, most of the people prefer to ignore them. However, th......, it is shown that the integration of phase change materials in wallboards or furniture elements can appreciably improve the energy flexibility of buildings.......Many numerical models for building energy simulation assume empty rooms and do not account for the indoor content of occupied buildings. Furnishing elements and indoor items have complicated shapes and are made of various materials. Therefore, most of the people prefer to ignore them. However...

  1. Development of Phanan Pandanus Handicraft Design for the Furniture Industry in Promotion of Creative-Based Economy

    Directory of Open Access Journals (Sweden)

    Payomrat Ruangrit

    2015-11-01

    Full Text Available This research study is a qualitative research which aims to (1 study the background of Phanan pandanus weaving handicraft, (2 study the problems encountered in development of Phanan pandanus weaving handicraft for the furniture industry, and (3 determine appropriate ways to develop suitable pandanus handicraft designs to promote the creative economy. The target area of this research was composed of three Thai provinces; Trang, Krabi and Satun. The research methods were study of books and printed matters, observation, interviews, group discussions and a workshop. The research findings revealed that the background and current status of Phanan pandanus weaving in each target group was similarly initiated as an ancestral legacy. Learning skill was acquired through observation without any particular textbooks. The learning activity was first started with small groups, which were extended into large groups with 20-30 members. The average age of group members is 40 years and older, with educational levels between Prathom 6 (upper primary to Mathayom 6 (upper secondary. The products made by each group are similar. In terms of the marketplace, each group aims at the domestic market. Each member earns approximately 2,500-6,000 baht per month. In terms of the problems of Phanan pandanus weaving, handicraft production mainly suffers from a lack of designers, lack of support from the government sector, unaffordable costs of hiring designers, lack of creativity in producing new products and inability to produce large quantities of products due to time consumption. According to the research findings, there are 3 guideline areas for development of Phanan pandanus handicraft design for the furniture industry in promotion of creative-based economy: (1 Guidelines for development of pandanus handicraft design; (2 Guidelines for management; (3 Guidelines for the incorporation of other equipment and materials.

  2. Eco-innovation of a wooden childhood furniture set: an example of environmental solutions in the wood sector.

    Science.gov (United States)

    González-García, Sara; García Lozano, Raúl; Moreira, M Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo; Murphy, Richard J

    2012-06-01

    The environmental profile of a set of wood furniture was carried out to define the best design criteria for its eco-design. A baby cot convertible into a bed, a study desk and a bedside table were the objects of study. Two quantitative and qualitative environmental approaches were combined in order to propose improvement alternatives: Life Cycle Assessment (LCA) and Design for Environment (DfE). In the first case Life Cycle Assessment (LCA) was applied to identify the hot spots in the product system. As a next step, LCA information was used in eco-briefing to determine several improvement alternatives. A wood products company located in Catalonia (NE Spain) was assessed in detail, dividing the process into three stages: assembly, finishing and packaging. Ten impact categories were considered in the LCA study: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity and photochemical oxidant formation. Two processes can be considered the key environmental factors: the production of the wooden boards and electricity, with contributions of 45-68% and 14-33% respectively depending on the impact categories. Subsequently, several improvement alternatives were proposed in the eco-design process (DfE) to achieve reductions in a short-medium period of time in the environmental impact. These eco-design strategies could reduce the environmental profile of the setup by 14%. The correct methodological adaptation of the concept of eco-briefing, as a tool for communication among environmental technicians and designers, the simplification of the analytical tool used and the LCA, could facilitate the environmental analysis of a product. The results obtained provide information that can help the furniture sector to improve their environmental performance. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Institutional ethnography

    DEFF Research Database (Denmark)

    Lund, Rebecca; Tienari, Janne

    2016-01-01

    The study of M&As is dominated by positivist and functionalist world views and the use of quantitative methods. Although extant research also uses qualitative and mixed methods, it can be criticized for viewing its subject matter through an abstract and external lens. The researcher is placed in ......, and point to some of the problems in M&A studies identified through this lens. Finally, we argue why institutional ethnography, in comparison with other methods of inquiry, is particularly fruitful in the study of mergers and acquisitions....

  4. 75 FR 9581 - Wooden Bedroom Furniture from the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-03-03

    ..., the Office of Policy issued a memorandum identifying six countries as being at a level of economic... for sale in coordinated groups, or bedrooms, in which all of the individual pieces are of... case piece taller than it is wide featuring a series of drawers and with or without one or more doors...

  5. Setting Up CD-ROM Work Areas. Part I: Ergonomic Considerations, User Furniture, Location.

    Science.gov (United States)

    Vasi, John; LaGuardia, Cheryl

    1992-01-01

    The first of a two-part series on design of CD-ROM work areas in libraries discusses (1) space and location considerations; (2) ergonomics, including work surface, chairs, lighting, printers, other accessories, and security; and (3) other considerations, including staff assistance, reference tools, literature racks, and promotional materials. (MES)

  6. Factores determinantes del desempeño del Clúster: Caso aplicado al sector de muebles en Barranquilla, Colombia. Determinants of performance cluster: Case applied to furniture industry in Barranquilla, Colombia

    Directory of Open Access Journals (Sweden)

    Jael López Jiménez

    2016-04-01

    Full Text Available Resumen:  Este trabajo estima la influencia de algunos factores determinantes de éxito sobre el desempeño de un clúster o conglomerado de empresas. El propósito fue conocer mejor los clúster como instrumento estratégico para el desarrollo económico local; específicamente se enfocó en identificar un grupo de factores clave que, según la literatura, pueden influir en el desempeño de éstos y contrastar, empíricamente, hasta qué punto el desempeño del clúster de muebles en la ciudad de Barranquilla es influido por esos mismos factores. Para tal efecto se elaboró un cuestionario que fue aplicado a cincuenta y cuatro empresas pertenecientes al clúster de muebles, según las bases de datos suministradas por la Cámara de Comercio de Barranquilla, Colombia Inn. Los resultados señalan que los factores calidad, localización, buenas prácticas, cooperación empresarial y la existencia de un entorno local positivo, tienen una relación alta y positiva con el desempeño. Finalmente se propone una serie de recomendaciones con el fin de que se pueda mejorar el desarrollo del clúster analizado en particular y de iniciativas similares en general.     Abstract:  This paper estimates the influence of some determinants of success on the performance of a cluster. This was aimed to better understand the cluster as a strategic tool for local economic development. It focuses on the identification of a set of key factors that, according to the literature, can influence the performance of clusters, and how the same factors influence the furniture cluster of Barranquilla. A questionnaire was applied to 54 companies belonging to the furniture cluster, according to the databases provided by the Cámara de Comercio de Barranquilla, Colombia Inn. As a result, the factors quality, location, best practices, business cooperation and the existence of a positive local environment, have a high and positive relationship with the performance. Finally a number

  7. Summation of series

    CERN Document Server

    Jolley, LB W

    2004-01-01

    Over 1,100 common series, all grouped for easy reference. Arranged by category, these series include arithmetical and geometrical progressions, powers and products of natural numbers, figurate and polygonal numbers, inverse natural numbers, exponential and logarithmic series, binomials, simple inverse products, factorials, trigonometrical and hyperbolic expansions, and additional series. 1961 edition.

  8. Art Deco Furniture Designs in Republican Era: Selahattin Refik Sırmalı and the Study Room of Atatürk

    Directory of Open Access Journals (Sweden)

    Çiler Buket Tosun

    2014-12-01

    Full Text Available This study presents the works of Selahattin Refik who played an active role in the Republican Era Architecture through his modern practices in interior architecture and furniture design. Practicing the most recent and popular art of his time, Art Deco, Refik also received the appreciation of Atatürk, and was influential in the first twenty years of the Republic. This study focuses on his interior and furniture designs for the ‘Study Room’ designed for Ataturk at the ‘Ataturk Museum House which is the first Official Residence of the President of the Republic of Turkey. Pioneering original Art Deco practices of our country, the ‘Study Room’ has been an implementation that illustrates not only the originality and competency of Selahattin Refik in practicing the modern art of the era but also the reflection of the modern identity of the Republic on interior designs.

  9. Contact allergy to finished woods in furniture and furnishings: a small allergic contact dermatitis epidemic to western red cedar in sauna interior decoration.

    Science.gov (United States)

    Huilaja, L; Kubin, M E; Riekki, R

    2016-01-01

    Allergic contact dermatitis caused by wood dust remains uncommon and most cases are occupational. Contact allergy to finished wooden products is even more rare and only few cases of contact dermatitis to wooden furnishings and furniture are described. During 2012-2014 surprisingly many patients with dermatitis associated to sauna baths were referred to our clinic. We report three novel cases with allergic contact dermatitis to western red cedar due to exposure during sauna baths. Three cases of non-occupational contact dermatitis to western red cedar were confirmed by patch testing. Allergic contact dermatitis to interior decoration or furniture is a rarity, but can be induced by novel exposures, like western red cedar in sauna interior decoration. © 2015 European Academy of Dermatology and Venereology.

  10. Cultivating Institutional Capacities for Learning Analytics

    Science.gov (United States)

    Lonn, Steven; McKay, Timothy A.; Teasley, Stephanie D.

    2017-01-01

    This chapter details the process the University of Michigan developed to build institutional capacity for learning analytics. A symposium series, faculty task force, fellows program, research grants, and other initiatives are discussed, with lessons learned for future efforts and how other institutions might adapt such efforts to spur cultural…

  11. EL PROYECTO ARKIT. LA VIVIENDA COMO KIT DE MUEBLES / Project Arkit. The home as a furniture kit

    Directory of Open Access Journals (Sweden)

    Francisco Javier Terrados Cepeda

    2012-05-01

    Full Text Available RESUMEN El artículo hace una revisión sintética sobre algunas de las bases conceptuales del llamado “proyecto Arkit” así como sobre sus resultados en forma de proyectos residenciales y construcciones reales. Una primera parte recorre ejemplos de vivienda moderna donde lo que entendemos como mueble, levemente agigantado de escala, ha definido y en algunos casos realmente construido casi con exclusividad el espacio doméstico. Son los “muebles que construyen casas”. En la segunda parte, el artículo reseña los seis proyectos de casas prefabricadas ligeras que se han concebido al amparo del concepto del “kit de muebles” como sistema de prefabricación abierta: las viviendas del CSCAE, el prototipo Campohermoso, el proyecto Arkit, la residencia de Tariquejo, el proyecto Solarkit y el proyecto Arkit 18, de los cuales han sido construidos y analizados el tercero y el quinto: Arkit y su variante con energía solar Solarkit. El proyecto Arkit es una aportación novedosa en el campo de la vivienda prefabricada ligera, adaptada a las condiciones ambientales del sur de Europa, que usa como elementos constitutivos piezas de escala intermedia que están a medio camino entre el tamaño y la versatilidad del mobiliario y la escala de la habitación convencional. El proyecto Arkit permite disposiciones a elección del usuario y, como muestran los ejemplos expuestos, adaptaciones a diferentes programas residenciales. SUMMARY The article makes a summary review of some of the conceptual bases of the “ArtKit project” and their results as housing projects and real buildings. The first part covers examples of modern homes where what we understand as furniture, now rather gigantic in scale, has defined, and in some cases almost exclusively built, the domestic space. This is the “furniture which builds houses”. In the second part, the article reviews the six light prefabricated housing projects that have been designed under the

  12. Anthropometric evaluations and assessment of school furniture design in Nigeria: A case study of secondary schools in rural area of Odeda, Nigeria

    Directory of Open Access Journals (Sweden)

    Adekunle Ibrahim Musa

    2011-01-01

    Full Text Available This study was carried out on 621 schoolboys with age range of 12-17 years in Junior and Senior Secondary Schools in Odeda area of Odeda local government in Ogun State, Nigeria. Different anthropometric data were collected from these boys. It was observed from the results that all anthropometric dimensions of the school children increase with their age. Moreover, there exists a little difference between mean values of different anthropometric dimensions between the boys of 12-13 years (2.9% to 8.8%, 14-15 years (1.3% to 9.9%, and 16-17 years (1.4% to 5.5%. But the said differences become much higher (16.2% to 42.4% when the same were compared between the children of 12 years and 17 years. Therefore, it can be said that the design of furniture for the children of 12 years will not match the children of 17 years. If single furniture is designed by considering dimensions of the children from 12 years to 17years, it will also not suit the children of all age groups. Therefore, in the present investigation, all the students have been divided into three combined age groups, e.g., 12-13 years, 14-15 years, and 16-17 years, and the percentile values (5th, 50th and 95th of anthropometric measures, which will be helpful for designing of the classroom furniture.

  13. Co-brand strategy of evaluation of visual images in furniture design: Jimmy S.P.A. and STRAUSS as examples

    Science.gov (United States)

    Chen, Tien-Li; Pan, Fang-Ming; Tsai, Jen-Hui

    2013-03-01

    This study aimed to investigate the correlation of the image associated by the design Co-Brand (Jimmy S.P.A. and STRAUSS) and the impression perceived by subject of viewers. Visual images were used to examine the merit of the evaluation. The best result is provided using an object as an appropriate evaluation method. There are a lot of factors which influence to evaluation of a design. This study is limited to distinguish the appearance from Jimmy's picture books transform furniture and so on. Co-Brand of Jimmy S.P.A. and STRAUSS is not easy because there are not from the same cultural, and industry background and applying different marketing strategy, it is a way to combine the two brands by designing, used questionnaire of SD (Semantic differential evaluation) evaluation method to test out the perception of viewers, the objective of this study is to investigate and appraised the Co-Brands use by of the image in furniture from patrons. SD evaluation result showed, if design cannot understand the perception image of Jimmy S.P.A and STRAUSS with viewers mind, furniture design also can't transmit feeling with design.

  14. Nicotine Addiction. National Institute on Drug Abuse Research Report Series.

    Science.gov (United States)

    National Inst. on Drug Abuse (DHHS/PHS), Bethesda, MD.

    The use of tobacco products is one of the most critical health problems facing the country. Through the use of neuroimaging technologies, it is now possible to see some of the changes in brain functioning that occur from smoking. There may be other chemicals in cigarette smoke that contribute to addiction. The improved understanding of addiction,…

  15. Productivity and Institutions

    Directory of Open Access Journals (Sweden)

    Gylfi Zoega

    2015-12-01

    Full Text Available Differences in productivity account for differences in output per capita between countries as well as changes in output and the standard of living for each country over long periods of time. During the first industrial revolution, one could already see the emergence of two groups of countries: the high- and the low-GDP per capita countries. The list of countries belonging to the highproductivity group has not changed much over the past century. Differences in institutions separate the two clubs. The high-productivity group is, amongst many other differences, characterized by less corruption, a better legal system, superior enforcement of contracts, a lower cost of starting a business and lower tariffs. Historical output series for Britain going back to the mid-19th century show that productivity has increased greatly and improved the standard of living.

  16. ‘Don’t buy without visiting the House of Apolinar’: the furniture firm of Apolinar Marcos

    Directory of Open Access Journals (Sweden)

    Rodríguez Bernis, Sofía

    2011-06-01

    Full Text Available This study deals with the commercial activities of the Madrid firm Apolinar Marcos during its two main stages, through the use of their archive containing projects for interior decoration and furniture, models, prints, photographs and drawings used as catalogues. The methods employed for obtaining materials, the system of acquiring individual and groups of pieces from other firms, the wide range of suppliers —even outside of Spain— that sent pieces as samples or on deposit, and their habitual sales methods are discussed.

    En este artículo se repasa la actividad comercial de la firma madrileña Apolinar Marcos en sus dos etapas principales, a partir de la exhumación de su archivo personal que incluye proyectos de decoraciones y muebles, modelos, láminas, fotografías y dibujos propios, ofrecidos como catálogos. Se repasan los métodos de aprovisionamiento de materiales, el sistema de adquisición de piezas y conjuntos a otras compañías, la amplia red de proveedores incluso de fuera de España, que le enviaban género a modo de muestrarios o depósitos, y su método usual de venta.

  17. The Impact of the Business Environment in Developing an Enterprise - Case Study: Furniture Manufacturing Tefik Canga Design

    Directory of Open Access Journals (Sweden)

    MSc. Arbenita Topalli

    2015-12-01

    Full Text Available The enterprise is an organization that reconciles the workforce, real capital, techniques, information and knowledge to produce and service. The enterprise cannot control or have any impact on the environment that it`s surrounded by, only to adjust to it. Despite that, enterprises can be specialized in a special market segment, yet it will be subject to competitive pressure. Furniture Manufacturing Tefik Canga Design has taken over the use of natural and unnatural resources to promote the development and growth, or to solve financial and operational problems. With this research, we propose a growth model of a manufacturing enterprise in relation to the business environment. Implementation of the case is described and the profitability and productivity performance is analyzed using five years of historical data product. Therefore, by this study is expected to achieve results, that will improve the input-output relationship in order to increase the firm's productivity, increase the value of employees and create opportunities for development in order to cut production costs.

  18. A survey into process and worker's characteristics in the wood furniture industry in Songkhla Province, southern region of Thailand.

    Science.gov (United States)

    Tuntiseranee, P; Chongsuvivatwong, V

    1998-12-01

    A cross-sectional survey of the wood furniture industry was conducted in southern Thailand in February 1993. The aim was to examine the manufacturing process, occupational hazards at the workplace, workers' demographic characteristics, period of employment, incidence rate of work related injury and some reproductive history of workers. Altogether 69 managers and 1,000 workers participated in the study. There are 2 main types of wood industry, rubberwood and hardwood. The rubberwood industry is semi-automated with advanced technology, has a female-dominated workforce of 200-300 workers per factory and overseas-market orientation. The hardwood industry is based in small-scale workplaces ranging from 20 to 60 workers, domestic-market orientation and has a male-dominated workforce. Most of the workers were young, single, of low education and were high turnover rate laborforce, with arduous work and long working hours per week. Solvent was the most frequent chemical exposure. The person-year incidence of chemical exposure in female workers was higher than in male workers for every group of chemicals. The incidence of accidents was twice as high as the official rate. The standardized fertility ratio of female wood workers was only 51.6% of that of the Thai female population. There was a high abortion rate among women who became pregnant inside the wood industry compared to that among pregnancies outside the wood factory. Wood industry workers were exposed to occupational hazards and accident-prone work conditions.

  19. The effect of sub-floor heating on house-dust-mite populations on floors and in furniture.

    Science.gov (United States)

    de Boer, Rob

    2003-01-01

    It is well known that dehydrating conditions for house dust mites can be created by simply raising the temperature, causing loss of body water and eventually death. Thus, it can be expected that conditions for dust mites are less favourable on floors supplied with sub-floor heating. This was examined in a study of 16 houses with sub-floor heating and 21 without. The pattern of changes in air humidity and temperature on the floors was investigated and compared to known data of the tolerance of dust mites. Also the resident mite populations were compared. Floors with sub-floor heating had, on average, fewer mites, but the difference with unheated floors was small. It was remarkable that mite numbers were also lower in upholstered furniture. Another important observation was that some houses with sub-floor heating had high mite numbers, indicating that this type of heating is compatible with a thriving mite population. Temperature and humidity conditions of heated floors may allow mites not only to survive, but also to remain active in winter. A moderate increase in temperature, a moderate decrease in (absolute) air humidity, or a combination of both, will suffice to keep the humidity all winter below the Critical Equilibrium Humidity, the level of air humidity that is critical for mite growth and reproduction, hence for allergen production. However, it is argued that measures to suppress allergen production by house dust mites are likely to be far more effective if taken in summer rather than in winter.

  20. Descriptive analysis of factors that influence economical results in the furniture cluster of Bento Gonçalves

    Directory of Open Access Journals (Sweden)

    Miguel Afonso Sellitto

    2014-12-01

    Full Text Available The purpose of this article is to analyze factors that can influence the competitiveness of companies in the furniture cluster of Bento Gonçalves, Rio Grande do Sul. By a literature review, we identify four factors that can influence competition in clusters: the region's productivity, innovation, relationship with suppliers, and cooperation between companies. The research method is the single case study. The research techniques are the review of specific bibliographic and documentation of the studied cluster, and interviews with experts of the cluster. The main findings are: the cluster has high productivity, mainly by hi-tech machinery employed by the main companies; innovation is permanent and motivated by the imposition to medium and short companies of business goals by the main companies; the relationship with suppliers is problematic regarding the large-scale vendors by the lack of the practice of collective purchases in the area; and cooperation between enterprises is small, by the culture of the region that don´t appreciate depending on resources available outside the companies. Such factors can contribute to produce hypotheses for further research.

  1. Seminar series on Safety matters

    CERN Multimedia

    HSE

    2010-01-01

    The HSE - Occupational Health & Safety and Environmental Protection - Unit is starting a seminar series on Safety matters. The aim is to invite colleagues from Universities, Industries or Government Agencies to share their experience. The seminars will take place in intervals of several months. Part of the Seminars will be held in the form of a Forum where participants can discuss and share views with persons who manage, teach or research Safety matters elsewhere. You are invited to the first Safety Seminar on 22nd September 2010 at 10h00 in building 40 S2 A1 "Salle Andersson" L’Ecole Polytechnique Fédérale de Lausanne (EPFL) will present the way safety is managed in their research institution. Some aspects of research in physics and chemical laboratories will also be presented. The seminar will be given by Dr Thierry Meyer, Head of OHS at FSB-EPFL and Dr Amela Groso, responsible for the safety of the physics institutes

  2. Geometric Series via Probability

    Science.gov (United States)

    Tesman, Barry

    2012-01-01

    Infinite series is a challenging topic in the undergraduate mathematics curriculum for many students. In fact, there is a vast literature in mathematics education research on convergence issues. One of the most important types of infinite series is the geometric series. Their beauty lies in the fact that they can be evaluated explicitly and that…

  3. On the series

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... http://www.ias.ac.in/article/fulltext/pmsc/115/04/0371-0381. Keywords. Inverse binomial series; hypergeometric series; polylogarithms; integral representations. Abstract. In this paper we investigate the series ∑ k = 1 ∞ ( 3 k k ) − 1 k − n x k . Obtaining some integral representations of them, we evaluated the ...

  4. 25 years of time series forecasting

    NARCIS (Netherlands)

    de Gooijer, J.G.; Hyndman, R.J.

    2006-01-01

    We review the past 25 years of research into time series forecasting. In this silver jubilee issue, we naturally highlight results published in journals managed by the International Institute of Forecasters (Journal of Forecasting 1982-1985 and International Journal of Forecasting 1985-2005). During

  5. The Audit Committee. AGB Effective Committee Series

    Science.gov (United States)

    Staisloff, Richard L.

    2011-01-01

    This publication is part of an Association of Governing Boards of Universities and Colleges (AGB) series devoted to strengthening the role of key standing committees of governing boards. While there is no optimum committee system for institutions of higher education, certain principles, practices, and procedures prevail. The best practices…

  6. Patchy proteins, anions and the Hofmeister series

    Czech Academy of Sciences Publication Activity Database

    Lund, Mikael; Jungwirth, Pavel

    2008-01-01

    Roč. 20, č. 49 (2008), 494218/1-494218/4 ISSN 0953-8984 R&D Projects: GA MŠk LC512 Institutional research plan: CEZ:AV0Z40550506 Keywords : lyzozyme * water * protein association * Hofmeister series Subject RIV: CF - Physical ; The oretical Chemistry Impact factor: 1.900, year: 2008

  7. A national cross-sectional study in the Danish wood and furniture industry on working postures and manual materials handling.

    Science.gov (United States)

    Christensen, H; Pedersen, M B; Sjøgaard, G

    1995-04-01

    Musculoskeletal disorders constitute a major problem in the wood and furniture industry and identification of risk factors is needed urgently. Therefore, exposures to different work tasks and variation in the job were recorded based on an observation survey in combination with an interview among 281 employees working in wood working and painting departments. A questionnaire survey confirmed high frequencies of symptoms from the musculoskeletal system: The one-year prevalence of symptoms from the low back was 42% and symptoms from the neck/shoulder was 40%. The exposure was evaluated based on: (1) classification of work tasks, (2) work cycle time, (3) manual materials handling, (4) working postures, and (5) variation in the job. Among the employees 47% performed feeding or clearing of machines, 35% performed wood working or painting materials, and 18% performed various other operations. Among the employees 20% had no variation in their job while 44% had little variation. Manual materials handling of 375 different burdens was observed, which most often occurred during feeding or clearing of machines. The weight of burdens lifted was 0.5-87.0 kg, where 2% had a weight of more than 50 kg. Among the lifting conditions 30% were evaluated as implying a risk of injury. An additional risk factor was the high total tonnage lifted per day, which was estimated to range from 132 kg to 58,800 kg. Working postures implied a risk of injury due to prolonged forward and lateral flexions of the neck, which was seen most frequently during wood working or painting materials. These data substantiate the finding that work tasks mainly during feeding or clearing of machines imply a risk of injury to the low back and a risk of injury to the neck and shoulder area mainly during wood working or painting materials. Optimal strategies for job redesign may be worked out by using these data in order to prevent occupational musculoskeletal disorders.

  8. [Prevalence of upper limb work-related musculoskeletal disorders (UL-WMSDs) in workers of the upholstered furniture industry].

    Science.gov (United States)

    Nicoletti, S; Carino, M; Di Leone, G; Trani, G; Carella, F; Rubino, G; Leone, E; Popolizio, R; Colafiglio, S; Ambrosi, L

    2008-01-01

    The upholstered furniture industry, the so-called "triangle of the sofa industry", is a geographic area of national and strategic economic importance in southern Italy. The single tasks are carried out mostly manually, with the characteristics of a handicraft approach. The aim of the survey was to assess the prevalence of upper limb work-related musculoskeletal disorders (UL-WMSDs) in 30 factories of the sofa industry located in a large geographic area of the Puglia and Basilicata Regions. In the period 1 January-31 December 2003 a network of occupational physicians investigated a population of 5.477 subjects (exposed n=3481, controls n=1996, M=3865, F=1612) in 30 different factories of the area. More than 60 percent of the total workforce studied was employed in large-sized companies (>500 employees). The following work tasks were considered: filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Case-definition was assessed through standardized procedures: symptoms by questionnaire plus physical and laboratory/imaging findings. Cumulative prevalence rates of UL-WMSDs as at 31 December 2003 reached values of up to 30% in high risk groups. Prevalence rates showed good correlation with the concise OCRA index used for assessment of exposure to repetitive strain and movements of the upper limb. The most frequently occurring disorders were tendon-related cysts and wrist tendonitis. Shoulder disorders were more frequent in male and female leather-cutting operators. This survey showed a significantly high prevalence of UL-WMSDs in sofa industry workers. It did not seem to be confirmed in this study that there was a greater female susceptibility to UL-WMSDs with the exception of carpal tunnel syndrome: gender difference seems to be less relevant at increasing levels of occupational exposure to repetitive movements and exertion of the upper limbs.

  9. Series Transmission Line Transformer

    Science.gov (United States)

    Buckles, Robert A.; Booth, Rex; Yen, Boris T.

    2004-06-29

    A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

  10. Series expansions without diagrams

    International Nuclear Information System (INIS)

    Bhanot, G.; Creutz, M.; Horvath, I.; Lacki, J.; Weckel, J.

    1994-01-01

    We discuss the use of recursive enumeration schemes to obtain low- and high-temperature series expansions for discrete statistical systems. Using linear combinations of generalized helical lattices, the method is competitive with diagrammatic approaches and is easily generalizable. We illustrate the approach using Ising and Potts models. We present low-temperature series results in up to five dimensions and high-temperature series in three dimensions. The method is general and can be applied to any discrete model

  11. Institutional Perspectives: The Challenges of E-Learning Diffusion

    Science.gov (United States)

    Nichols, Mark

    2008-01-01

    There has been significant recent interest in the dynamics of institutional change and e-learning. This paper reports on the findings from a series of discussions about e-learning diffusion held with institutional e-learning representatives from across the globe. In the course of discussion it became clear that in some institutions e-learning was…

  12. Influence of internal thermal mass on the indoor thermal dynamics and integration of phase change materials in furniture for building energy storage

    DEFF Research Database (Denmark)

    Johra, Hicham; Heiselberg, Per Kvols

    2017-01-01

    The increasing share of intermittent renewable energy on the grid encourages researchers to develop demand-side management strategies. Passive heat storage in the indoor space is a promising solution to improve the building energy flexibility. It relies on an accurate control of the transient...... building temperature. However, many of the current numerical models for building energy systems assume empty rooms and do not account entirely for the internal thermal inertia of objects like furniture. This review article points out that such assumption is not valid for dynamic calculations...

  13. Utilization of potentials - regular reduction of costs. An intelligent regulation and control of cooling furniture; Potenziale nutzen - Kosten geregelt senken. Intelligente Regelung und Steuerung von Kuehlmoebeln

    Energy Technology Data Exchange (ETDEWEB)

    Di Lieto, Gianluca [Wurm GmbH und Co. KG Elektronische Systeme, Remscheid (Germany). Bereich Vertrieb und Marketing

    2011-02-15

    The trade installs new, energy-efficient refrigerant plants and equips its salesrooms with energy-saving cooling furniture. In order to work in such a way that all potentials are exhausted an intelligent regulation and control is necessary. At the same time these systems help to fulfil legal requirements to a large extent automatically as for example with the security of food by means of a correct storage temperature (HACCP). But in the sense of a positive environmental balance, not all options are used by the users so far. They renounce savings with the energy in the two digit percent area due to an individual adjustment of the plant operation.

  14. Fourier Series Optimization Opportunity

    Science.gov (United States)

    Winkel, Brian

    2008-01-01

    This note discusses the introduction of Fourier series as an immediate application of optimization of a function of more than one variable. Specifically, it is shown how the study of Fourier series can be motivated to enrich a multivariable calculus class. This is done through discovery learning and use of technology wherein students build the…

  15. Visualizing the Geometric Series.

    Science.gov (United States)

    Bennett, Albert B., Jr.

    1989-01-01

    Mathematical proofs often leave students unconvinced or without understanding of what has been proved, because they provide no visual-geometric representation. Presented are geometric models for the finite geometric series when r is a whole number, and the infinite geometric series when r is the reciprocal of a whole number. (MNS)

  16. Upper Gastrointestinal (GI) Series

    Science.gov (United States)

    ... standard barium upper GI series, which uses only barium a double-contrast upper GI series, which uses both air and ... evenly coat your upper GI tract with the barium. If you are having a double-contrast study, you will swallow gas-forming crystals that ...

  17. SERI Wind Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Noun, R. J.

    1983-06-01

    The SERI Wind Energy Program manages the areas or innovative research, wind systems analysis, and environmental compatibility for the U.S. Department of Energy. Since 1978, SERI wind program staff have conducted in-house aerodynamic and engineering analyses of novel concepts for wind energy conversion and have managed over 20 subcontracts to determine technical feasibility; the most promising of these concepts is the passive blade cyclic pitch control project. In the area of systems analysis, the SERI program has analyzed the impact of intermittent generation on the reliability of electric utility systems using standard utility planning models. SERI has also conducted methodology assessments. Environmental issues related to television interference and acoustic noise from large wind turbines have been addressed. SERI has identified the causes, effects, and potential control of acoustic noise emissions from large wind turbines.

  18. Impact of surface disinfection and sterile draping of furniture on room air quality in a cardiac procedure room with a ventilation and air-conditioning system (extrusion airflow, cleanroom class 1b (DIN 1946-4)).

    Science.gov (United States)

    Below, Harald; Ryll, Sylvia; Empen, Klaus; Dornquast, Tina; Felix, Stefan; Rosenau, Heike; Kramer, Sebastian; Kramer, Axel

    2010-09-21

    In a cardiac procedure room, ventilated by a ventilation and air-conditioning system with turbulent mixed airflow, a protection zone in the operating area could be defined through visualization of airflows. Within this protection zone, no turbulence was detectable in the room air.Under the given conditions, disinfection of all surfaces including all furniture and equipment after the last operation and subsequent draping of furniture and all equipment that could not be removed from the room with sterile surgical drapes improved the indoor room air quality from cleanroom class C to cleanroom class B. This also allows procedures with elevated requirements to be performed in room class 1b.

  19. Divergent Perturbation Series

    International Nuclear Information System (INIS)

    Suslov, I.M.

    2005-01-01

    Various perturbation series are factorially divergent. The behavior of their high-order terms can be determined by Lipatov's method, which involves the use of instanton configurations of appropriate functional integrals. When the Lipatov asymptotic form is known and several lowest order terms of the perturbation series are found by direct calculation of diagrams, one can gain insight into the behavior of the remaining terms of the series, which can be resummed to solve various strong-coupling problems in a certain approximation. This approach is demonstrated by determining the Gell-Mann-Low functions in φ 4 theory, QED, and QCD with arbitrary coupling constants. An overview of the mathematical theory of divergent series is presented, and interpretation of perturbation series is discussed. Explicit derivations of the Lipatov asymptotic form are presented for some basic problems in theoretical physics. A solution is proposed to the problem of renormalon contributions, which hampered progress in this field in the late 1970s. Practical perturbation-series summation schemes are described both for a coupling constant of order unity and in the strong-coupling limit. An interpretation of the Borel integral is given for 'non-Borel-summable' series. Higher order corrections to the Lipatov asymptotic form are discussed

  20. Effective Indices in Site Selection of Furniture Industry from Point of View of Suppliers in North Khorasan Province: Application of AHP Method

    Directory of Open Access Journals (Sweden)

    Ali Darijani

    2012-01-01

    Full Text Available Adequate conducting studies on site selection will have economic impact on performance of industrial firm; besides the effects of social, environmental, cultural and economic in their area. Also, the regional characteristics as key factors in determining where to locate the problem is that it creates incentives for public, private and cooperative sectors for investing on that place. Determining the effective indices in furniture industry to set sellers' view is the aim of this study that conducted in North Khorasan province, Iran in 2010. After reviewing literatures and interviews, the effecting factors were identified and classified into five main groups; "materials and products", "infrastructure", "mortal", "economic" and "rules and regulations". Value of weighted indices determined by getting comments from experienced furniture sellers as well as using Analytical Hierarchy Process (AHP applied and flexible technique by Expert Choice software. The results showed that materials, distance to market, existing invertors indices with value-weighted 0.126, 0.114 and 0.099, respectively had highest priority.

  1. Knowledge Management as a Determining Factor in the Retention of Professionals in the Industry: A Case Study in an Organization in the Furniture Industry

    Directory of Open Access Journals (Sweden)

    Osmarina Pedro Garcia Garcia

    2017-01-01

    Full Text Available This study investigates which one(s of the knowledge management factor(s, via the tacit and/ or explicit way, are crucial in retaining professionals in a company in the furniture industry. The research was exploratory, with lifting procedure, and qualitative and quantitative approach. Data were collected from June to August 2014 in a furniture industry of Francisco Beltrão/PR, through a questionnaire applied to 224 employees of administrative, industrial and commercial areas, as follows: 11 managers, 44 responsible for the area and 169 operational employees. The Likert scale detected the frequency of respondents’ views. To provide consistency to the findings, the data obtained Multivariate Analysis statistical treatment, developed in the free R software. We applied the Main Component Analysis, Factorial Analysis, Correspondence Analysis, Correlation Analysis and Chi-squared Test separately for tacit and explicit ways. After the analysis, we concluded that through the factors shown in the study, both pathways influence the retention of employees of the surveyed company.

  2. Analysing Stable Time Series

    National Research Council Canada - National Science Library

    Adler, Robert

    1997-01-01

    We describe how to take a stable, ARMA, time series through the various stages of model identification, parameter estimation, and diagnostic checking, and accompany the discussion with a goodly number...

  3. Multivariate Time Series Search

    Data.gov (United States)

    National Aeronautics and Space Administration — Multivariate Time-Series (MTS) are ubiquitous, and are generated in areas as disparate as sensor recordings in aerospace systems, music and video streams, medical...

  4. Historical Climatology Series

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Historical Climatology Series (HCS) is a set of climate-related publications published by NOAA's National Climatic Data Center beginning in 1978. HCS is...

  5. Institutional investors: arbitrageurs or rational trend\\ud chasers?

    OpenAIRE

    Zeng, Yeqin

    2016-01-01

    This paper studies the relationship between institutional investor holdings and stock misvaluation in the U.S. between 1980 and 2010. I find that institutional investors overweigh overvalued and underweigh undervalued stocks in their portfolio, taking the market portfolio as a benchmark. Cross-sectionally, institutional investors hold more overvalued stocks than undervalued stocks. The time-series studies also show that institutional ownership of overvalued portfolios increases as the portfol...

  6. Long time series

    DEFF Research Database (Denmark)

    Hisdal, H.; Holmqvist, E.; Hyvärinen, V.

    Awareness that emission of greenhouse gases will raise the global temperature and change the climate has led to studies trying to identify such changes in long-term climate and hydrologic time series. This report, written by the......Awareness that emission of greenhouse gases will raise the global temperature and change the climate has led to studies trying to identify such changes in long-term climate and hydrologic time series. This report, written by the...

  7. Institutions as Knowledge Capital

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Garzarelli, Giampaolo

    The paper revisits the socioeconomic theory of the Austrian School economist Ludwig M. Lachmann. By showing that the common claim that Lachmann's idiosyncratic (read: eclectic and multidisciplinary) approach to economics entails nihilism is unfounded, it reaches the following conclusions. (1......) Lachmann held a sophisticated institutional position to economics that anticipated developments in contemporary new institutional economics. (2) Lachmann's sociological and economic reading of institutions offers insights for the problem of coordination. (3) Lachmann extends contemporary new institutional...... theory without simultaneously denying the policy approach of comparative institutional analysis. (90 words.)KeywordsComparative institutional analysis, coordination, expectations, institutionalevolution, interpretative institutionalism.JEL CodesB31, B52, B53, D80....

  8. What are Institutional Logics

    DEFF Research Database (Denmark)

    Berg Johansen, Christina; Waldorff, Susanne Boch

    This study presents new insights into the explanatory power of the institutional logics perspective. With outset in a discussion of seminal theory texts, we identify two fundamental topics that frame institutional logics: overarching institutional orders guides by institutional logics, as well...... as change and agency generated by friction between logics. We use these topics as basis for an analysis of selected empirical papers, with the aim of understanding how institutional logics contribute to institutional theory at large, and which social matters institutional logics can and cannot explore...

  9. What are Institutional Logics

    OpenAIRE

    Berg Johansen, Christina; Bock Waldorff, Susanne

    2015-01-01

    This study presents new insights into the explanatory power of the institutional logics perspective. With outset in a discussion of seminal theory texts, we identify two fundamental topics that frame institutional logics: overarching institutional orders guided by institutional logics, as well as change and agency generated by friction between logics. We use these topics as basis for an analysis of selected empirical papers, with the aim of understanding how institutional logics contribute to...

  10. Goffman, the individual, institutions and stigmatisation.

    Science.gov (United States)

    Alaszewski, A; Manthorpe, J

    In the fifth part of our series about sociology, the sociology of Erving Goffman is discussed, particularly in relation to his work on institutions. In contrast with earlier prominent sociological figures, Goffman's emphasis was on the individual rather than on grand-scale theories about social systems.

  11. On Sums of Numerical Series and Fourier Series

    Science.gov (United States)

    Pavao, H. Germano; de Oliveira, E. Capelas

    2008-01-01

    We discuss a class of trigonometric functions whose corresponding Fourier series, on a conveniently chosen interval, can be used to calculate several numerical series. Particular cases are presented and two recent results involving numerical series are recovered. (Contains 1 note.)

  12. The Level of Customer Participation in Co-Production of Planning the Furniture Services Klientų įsitraukimo bendrai kuriant baldų projektavimo paslaugas laipsnis

    Directory of Open Access Journals (Sweden)

    Rigita Tijūnaitienė

    2011-02-01

    Full Text Available

    This article analyses customer’s level of participation in co-production of service. A client’s, known as a co-producer’s involvement is a pretty new conception of participation in creation of service where customers participate in projects, in direct, all-round and not only physical ways, together with professional representatives of service providers. A customer’s activity is becoming an important factor in order to achieve the results of effective creation of service, considering that client’s level while participating plays an essential role in the creation of service. To accomplish an empirical investigation, two quality methods were selected (observation and interview, which were performed in the company, which provides the services of furniture design. Theoretical literature analyses showed that there are three levels of customer’s participation: low, average and high, which usually appear in creation of co-productive service. Empirical investigation reve-aled that while co-producing services of furniture design customer’s level of participation can be: low, average, average high and high. This shows that “pure” level of participation in co-production of furniture design service appears rarely, while intermediate (“impure” level of participation can be observed more frequently. It is established that customer’s personality, temper, stress, lack of designer’s attention, preliminary decisions, and goods peculiarities determine causes of customer’s involvement/ devolvement. It is established that it is hard to elucidate and reveal customer’s needs, wishes and motives when the level of participation in co-production of furniture design service is low, and, as a result of that, a chance that the results of a service could not correspond to all customers expectations, rises. It is

  13. Visual time series analysis

    DEFF Research Database (Denmark)

    Fischer, Paul; Hilbert, Astrid

    2012-01-01

    We introduce a platform which supplies an easy-to-handle, interactive, extendable, and fast analysis tool for time series analysis. In contrast to other software suits like Maple, Matlab, or R, which use a command-line-like interface and where the user has to memorize/look-up the appropriate...... commands, our application is select-and-click-driven. It allows to derive many different sequences of deviations for a given time series and to visualize them in different ways in order to judge their expressive power and to reuse the procedure found. For many transformations or model-ts, the user may...... choose between manual and automated parameter selection. The user can dene new transformations and add them to the system. The application contains efficient implementations of advanced and recent techniques for time series analysis including techniques related to extreme value analysis and filtering...

  14. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... member of our patient care team. Managing Your Arthritis Managing Your Arthritis Managing Chronic Pain and Depression ...

  15. Rheumatoid Arthritis Educational Video Series

    Science.gov (United States)

    ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

  16. Time Series Momentum

    DEFF Research Database (Denmark)

    Moskowitz, Tobias J.; Ooi, Yao Hua; Heje Pedersen, Lasse

    2012-01-01

    We document significant “time series momentum” in equity index, currency, commodity, and bond futures for each of the 58 liquid instruments we consider. We find persistence in returns for one to 12 months that partially reverses over longer horizons, consistent with sentiment theories of initial...... under-reaction and delayed over-reaction. A diversified portfolio of time series momentum strategies across all asset classes delivers substantial abnormal returns with little exposure to standard asset pricing factors and performs best during extreme markets. Examining the trading activities...

  17. Applied time series analysis

    CERN Document Server

    Woodward, Wayne A; Elliott, Alan C

    2011-01-01

    ""There is scarcely a standard technique that the reader will find left out … this book is highly recommended for those requiring a ready introduction to applicable methods in time series and serves as a useful resource for pedagogical purposes.""-International Statistical Review (2014), 82""Current time series theory for practice is well summarized in this book.""-Emmanuel Parzen, Texas A&M University""What an extraordinary range of topics covered, all very insightfully. I like [the authors'] innovations very much, such as the AR factor table.""-David Findley, U.S. Census Bureau (retired)""…

  18. Predicting chaotic time series

    International Nuclear Information System (INIS)

    Farmer, J.D.; Sidorowich, J.J.

    1987-01-01

    We present a forecasting technique for chaotic data. After embedding a time series in a state space using delay coordinates, we ''learn'' the induced nonlinear mapping using local approximation. This allows us to make short-term predictions of the future behavior of a time series, using information based only on past values. We present an error estimate for this technique, and demonstrate its effectiveness by applying it to several examples, including data from the Mackey-Glass delay differential equation, Rayleigh-Benard convection, and Taylor-Couette flow

  19. Institutional Logics in Action

    DEFF Research Database (Denmark)

    Lounsbury, Michael; Boxenbaum, Eva

    2013-01-01

    This double volume presents state-of-the-art research and thinking on the dynamics of actors and institutional logics. In the introduction, we briefly sketch the roots and branches of institutional logics scholarship before turning to the new buds of research on the topic of how actors engage...... institutional logics in the course of their organizational practice. We introduce an exciting line of new works on the meta-theoretical foundations of logics, institutional logic processes, and institutional complexity and organizational responses. Collectively, the papers in this volume advance the very...... prolific stream of research on institutional logics by deepening our insight into the active use of institutional logics in organizational action and interaction, including the institutional effects of such (inter)actions....

  20. NEWS: Institute news

    Science.gov (United States)

    2000-03-01

    Recognition for teachers The Institute of Physics has continued its programme of recognition for inspiring teachers with nine Teachers Awards in 2000, one at primary level and eight at secondary. The quality and quantity of nominations for secondary awards was very encouraging, especially those nominations made by students, but the number of nominations for teachers in the primary sector was disappointing. The award winners are: Teacher of Primary Science Graham Tomlinson, Cockermouth School, Cumbria Gill Stafford, Greens Norton Church of England Primary School, Towcester, Northants Teachers of Physics (Secondary) John Allen, All Hallows High School, Penwortham, Preston Tim Gamble, Lings Upper School, Northampton Denise Gault, Dalriada School, Ballymoney, Co Antrim Ian Lovat, Ampleforth College, North Yorkshire David Smith, Highgate School, North London Clive Thomas, Newcastle Emlyn Comprehensive School Graham Tomlinson, Cockermouth School, Cumbria Mark Travis, Cape Cornwall School, St Just, Cornwall If you know a teacher in a local primary school who is doing an exceptional job in motivating youngsters and colleagues in the teaching and learning of science, why not consider nominating them for an award? Further details can be obtained from the Institute's Education Department (Steven Chapman) by post or e-mail (schools.education@iop.org .) Annual Congress More details are now available on the various activities at this event taking place on 27 - 30 March 2000 at the Brighton Conference Centre. Among those organized by the Education Department are general science and technology hands-on activities for pupils aged 10 to 12 and more specific physics activities on Static Electricity for older students: * A series of short talks with hands-on demonstrations of music and musical instruments given by musicians, manufacturers and physicists. * A chance for students in years 9 to 13 to experience music making from the professionals' perspective. Mornings, 28 to 30 March